# KTranslator Generated File
# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Terje Bjerkelia <terje@bjerkelia.com>, 1999-2000
# Andreas Bergstr�m <abergstr@halden.net>, 2000
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2002-03-01 13:47+0100\n"
"PO-Revision-Date: 2002-02-03 14:34CET\n"
"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
"Language-Team: Norsk\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.5\n"

#: ../../Xconfigurator.pm_.c:242
msgid "Configure all heads independently"
msgstr "Konfigurere all hoder uavhengig"

#: ../../Xconfigurator.pm_.c:243
msgid "Use Xinerama extension"
msgstr "Bruk Xinerama utvidelse"

#: ../../Xconfigurator.pm_.c:246
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "Konfigurer bare kort \"%s\" (%s)"

#: ../../Xconfigurator.pm_.c:249
msgid "Multi-head configuration"
msgstr "Multi-hode konfigurasjon"

#: ../../Xconfigurator.pm_.c:250
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Systemet ditt st�tter konfigurasjon for flere hoder.\n"
"Hva �nsker du � gj�re?"

#: ../../Xconfigurator.pm_.c:261
msgid "Graphic card"
msgstr "Grafikk-kort"

#: ../../Xconfigurator.pm_.c:262
msgid "Select a graphic card"
msgstr "Velg et grafikk-kort"

#: ../../Xconfigurator.pm_.c:286
msgid "Choose a X server"
msgstr "Velg en X-tjener"

#: ../../Xconfigurator.pm_.c:286
msgid "X server"
msgstr "X-tjener"

#: ../../Xconfigurator.pm_.c:293
msgid "Choose a X driver"
msgstr "Velg en X driver"

#: ../../Xconfigurator.pm_.c:293
msgid "X driver"
msgstr "X driver"

#: ../../Xconfigurator.pm_.c:354 ../../Xconfigurator.pm_.c:360
#: ../../Xconfigurator.pm_.c:410 ../../Xconfigurator.pm_.c:1491
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:357
msgid "Which configuration of XFree do you want to have?"
msgstr "Hvilken konfigurasjon av XFree vil du ha?"

#: ../../Xconfigurator.pm_.c:368
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
"%s.\n"
"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."

#: ../../Xconfigurator.pm_.c:370 ../../Xconfigurator.pm_.c:403
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s."

#: ../../Xconfigurator.pm_.c:372 ../../Xconfigurator.pm_.c:405
#: ../../Xconfigurator.pm_.c:1491
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s med maskinvare 3D akselerasjon"

#: ../../Xconfigurator.pm_.c:380 ../../Xconfigurator.pm_.c:394
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon med XFree %s,\n"
"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN."

#: ../../Xconfigurator.pm_.c:382 ../../Xconfigurator.pm_.c:396
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s med EKSPERIMENTELL maskinvare 3D akselerasjon"

#: ../../Xconfigurator.pm_.c:391
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kortet ditt kan ha st�tte for maskinvare 3D akselerasjon, men bare med XFree "
"%s,\n"
"MERK AT DETTE ER EKSPERIMENTELL ST�TTE OG KAN 'FRYSE' MASKINEN DIN.\n"
"Kortet ditt er st�ttet av XFree %s som kan ha bedre st�tte i 2D."

#: ../../Xconfigurator.pm_.c:411
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installasjons skjermdriver)"

#: ../../Xconfigurator.pm_.c:415
msgid "XFree configuration"
msgstr "XFree konfigurasjon"

#: ../../Xconfigurator.pm_.c:486
msgid "Select the memory size of your graphic card"
msgstr "Velg minnest�rrelsen til grafikk-kortet ditt"

#: ../../Xconfigurator.pm_.c:540
msgid "Choose options for server"
msgstr "Velg opsjoner for tjener"

#: ../../Xconfigurator.pm_.c:564
msgid "Choose a monitor"
msgstr "Velg en monitor"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfigurator.pm_.c:567
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"De to kritiske parametrene er den vertikale oppfrisknings-raten, som er "
"raten\n"
"som som oppfrisker hele skjermen, og mest viktig den horisontale \n"
"sync-raten, som er raten som scanlinjer blir vist p�.\n"
"\n"
"Det et VELDIG VIKTIG at du ikke spesifiserer en monitor-type med et sync- "
"omr�de\n"
"som er utenfor det monitoren din er i stand til � klare: Du kan skade "
"skjermen din.\n"
"Hvis du er usikker, velg en konservativ innstilling."

#: ../../Xconfigurator.pm_.c:574
msgid "Horizontal refresh rate"
msgstr "Horisontal oppfrisknings-rate"

#: ../../Xconfigurator.pm_.c:575
msgid "Vertical refresh rate"
msgstr "Vertikal oppfrisknings-rate"

#: ../../Xconfigurator.pm_.c:612
msgid "Monitor not configured"
msgstr "Monitor er ikke konfigurert"

#: ../../Xconfigurator.pm_.c:615
msgid "Graphic card not configured yet"
msgstr "Grafikk-kort er ikke konfigurert enn�"

#: ../../Xconfigurator.pm_.c:618
msgid "Resolutions not chosen yet"
msgstr "Oppl�sninger er ikke valgt enn�"

#: ../../Xconfigurator.pm_.c:636
msgid "Do you want to test the configuration?"
msgstr "Vil du teste konfigurasjonen?"

#: ../../Xconfigurator.pm_.c:640
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Advarsel: testing av dette grafikk-kortet kan `fryse' maskinen din"

#: ../../Xconfigurator.pm_.c:643
msgid "Test of the configuration"
msgstr "Test konfigurasjon"

#: ../../Xconfigurator.pm_.c:682 ../../Xconfigurator.pm_.c:694
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"pr�v � endre noen parametere"

#: ../../Xconfigurator.pm_.c:682 ../../Xconfigurator.pm_.c:694
msgid "An error has occurred:"
msgstr "En feil oppsto:"

#: ../../Xconfigurator.pm_.c:721
#, c-format
msgid "Leaving in %d seconds"
msgstr "Slutter om %d sekunder"

#: ../../Xconfigurator.pm_.c:732
msgid "Is this the correct setting?"
msgstr "Er dette den riktige innstillingen?"

#: ../../Xconfigurator.pm_.c:741
msgid "An error has occurred, try to change some parameters"
msgstr "En feil oppsto, pr�v � endre noen parametere"

#: ../../Xconfigurator.pm_.c:812
msgid "Resolution"
msgstr "Oppl�sning"

#: ../../Xconfigurator.pm_.c:864
msgid "Choose the resolution and the color depth"
msgstr "Velg oppl�sning og fargedybde"

#: ../../Xconfigurator.pm_.c:866
#, c-format
msgid "Graphic card: %s"
msgstr "Grafikk-kort: %s"

#: ../../Xconfigurator.pm_.c:867
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86-tjener: %s"

#: ../../Xconfigurator.pm_.c:881 ../../diskdrake/interactive.pm_.c:259
#: ../../install_steps_interactive.pm_.c:208
msgid "More"
msgstr "Mer"

#: ../../Xconfigurator.pm_.c:881 ../../install_gtk.pm_.c:84
#: ../../install_steps_gtk.pm_.c:327 ../../interactive.pm_.c:127
#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
#: ../../standalone/drakbackup_.c:2385
msgid "Ok"
msgstr "Ok"

#: ../../Xconfigurator.pm_.c:883 ../../printerdrake.pm_.c:2427
#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
msgid "Expert Mode"
msgstr "Ekspertmodus"

#: ../../Xconfigurator.pm_.c:884
msgid "Show all"
msgstr "Vis alle"

#: ../../Xconfigurator.pm_.c:929
msgid "Resolutions"
msgstr "Oppl�sninger"

#: ../../Xconfigurator.pm_.c:1493
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-oppsett: %s\n"

#: ../../Xconfigurator.pm_.c:1494
#, c-format
msgid "Mouse type: %s\n"
msgstr "Type mus: %s\n"

#: ../../Xconfigurator.pm_.c:1495
#, c-format
msgid "Mouse device: %s\n"
msgstr "Enhet mus: %s\n"

#: ../../Xconfigurator.pm_.c:1496
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfigurator.pm_.c:1497
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HorizSync: %s\n"

#: ../../Xconfigurator.pm_.c:1498
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertRefresh: %s\n"

#: ../../Xconfigurator.pm_.c:1499
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafikk-kort: %s\n"

#: ../../Xconfigurator.pm_.c:1500
#, c-format
msgid "Graphic card identification: %s\n"
msgstr "Grafikk-kort identifisering: %s\n"

#: ../../Xconfigurator.pm_.c:1501
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Minne grafikk: %s kB\n"

#: ../../Xconfigurator.pm_.c:1503
#, c-format
msgid "Color depth: %s\n"
msgstr "Fargedybde: %s\n"

#: ../../Xconfigurator.pm_.c:1504
#, c-format
msgid "Resolution: %s\n"
msgstr "Oppl�sning: %s\n"

#: ../../Xconfigurator.pm_.c:1506
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86-tjener: %s\n"

#: ../../Xconfigurator.pm_.c:1507
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 driver: %s\n"

#: ../../Xconfigurator.pm_.c:1525
msgid "Preparing X-Window configuration"
msgstr "Forbereder X-Window konfigurasjon"

#: ../../Xconfigurator.pm_.c:1545
msgid "What do you want to do?"
msgstr "Hva �nsker du � gj�re?"

#: ../../Xconfigurator.pm_.c:1550
msgid "Change Monitor"
msgstr "Endre monitor"

#: ../../Xconfigurator.pm_.c:1551
msgid "Change Graphic card"
msgstr "Endre grafikk-kort"

#: ../../Xconfigurator.pm_.c:1554
msgid "Change Server options"
msgstr "Endre opsjoner for tjener"

#: ../../Xconfigurator.pm_.c:1555
msgid "Change Resolution"
msgstr "Endre oppl�sning"

#: ../../Xconfigurator.pm_.c:1556
msgid "Show information"
msgstr "Vis informasjon"

#: ../../Xconfigurator.pm_.c:1557
msgid "Test again"
msgstr "Test igjen"

#: ../../Xconfigurator.pm_.c:1558 ../../printerdrake.pm_.c:2430
#: ../../standalone/logdrake_.c:217
msgid "Quit"
msgstr "Avslutt"

#: ../../Xconfigurator.pm_.c:1566
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"Behold endringene?\n"
"N�v�rende konfigurasjon er:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1587
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Vennligst logg inn i %s p� nytt for � aktivere endringene"

#: ../../Xconfigurator.pm_.c:1602
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Vennligst logg ut og bruk s� Ctrl-Alt-BackSpace"

#: ../../Xconfigurator.pm_.c:1606
msgid "X at startup"
msgstr "X ved oppstart"

#: ../../Xconfigurator.pm_.c:1607
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"Jeg kan sette opp maskinen din til � automatisk starte X ved oppstart.\n"
"Vil du at X skal starte n�r du starter maskinen p� nytt?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 farger (8 bits)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "32 tusen farger (15 bits)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "65 tusen farger (16 bits)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "16 millioner farger (24 bits)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 milliarder farger (32 bits)"

#: ../../Xconfigurator_consts.pm_.c:113
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfigurator_consts.pm_.c:114
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfigurator_consts.pm_.c:115
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:116
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:117
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:118
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:119
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfigurator_consts.pm_.c:120
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfigurator_consts.pm_.c:121
msgid "64 MB or more"
msgstr "64 MB eller mer"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Standard VGA, 640x480 ved 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA 800x600 ved 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Utvidet Super VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:134
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Ikke-interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:135
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "H�yfrekvens SVGA, 1024x768 ved 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:136
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 ved 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:137
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 ved 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:138
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 ved 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:139
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Monitor som kan klare 1600x1200 ved 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:140
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Monitor som kan klare 1600x1200 ved 76 Hz"

#: ../../any.pm_.c:113 ../../any.pm_.c:138
msgid "First sector of boot partition"
msgstr "F�rste sektor av oppstartspartisjon"

#: ../../any.pm_.c:113 ../../any.pm_.c:138 ../../any.pm_.c:215
msgid "First sector of drive (MBR)"
msgstr "F�rste sektor av disk (MBR)"

#: ../../any.pm_.c:117
msgid "SILO Installation"
msgstr "SILO-installasjon"

#: ../../any.pm_.c:118 ../../any.pm_.c:131
msgid "Where do you want to install the bootloader?"
msgstr "Hvor �nsker du installere oppstartslasteren?"

#: ../../any.pm_.c:130
msgid "LILO/grub Installation"
msgstr "LILO/grub-installasjon"

#: ../../any.pm_.c:142 ../../any.pm_.c:156
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:144
msgid "LILO with text menu"
msgstr "LILO med tekstmeny"

#: ../../any.pm_.c:145 ../../any.pm_.c:156
msgid "LILO with graphical menu"
msgstr "LILO med grafisk meny"

#: ../../any.pm_.c:148
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:152
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Start fra DOS/Windows (loadlin)"

#: ../../any.pm_.c:154 ../../any.pm_.c:156
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:163 ../../any.pm_.c:195
msgid "Bootloader main options"
msgstr "Hovedopsjoner for oppstartslaster"

#: ../../any.pm_.c:164 ../../any.pm_.c:196
msgid "Bootloader to use"
msgstr "Oppstartslaster som skal brukes"

#: ../../any.pm_.c:166
msgid "Bootloader installation"
msgstr "Installasjon oppstartslaster"

#: ../../any.pm_.c:168 ../../any.pm_.c:198
msgid "Boot device"
msgstr "Oppstartsenhet"

#: ../../any.pm_.c:169
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (virker ikke p� gamle BIOS'er)"

#: ../../any.pm_.c:170
msgid "Compact"
msgstr "Kompakt"

#: ../../any.pm_.c:170
msgid "compact"
msgstr "kompakt"

#: ../../any.pm_.c:171 ../../any.pm_.c:280
msgid "Video mode"
msgstr "Skjermmodus"

#: ../../any.pm_.c:173
msgid "Delay before booting default image"
msgstr "Forsinkelse f�r oppstart av standard bilde"

#: ../../any.pm_.c:175 ../../any.pm_.c:778
#: ../../install_steps_interactive.pm_.c:1117 ../../network/modem.pm_.c:48
#: ../../printerdrake.pm_.c:703 ../../printerdrake.pm_.c:779
#: ../../standalone/draknet_.c:624
msgid "Password"
msgstr "Passord"

#: ../../any.pm_.c:176 ../../any.pm_.c:779
#: ../../install_steps_interactive.pm_.c:1118
msgid "Password (again)"
msgstr "Passord (igjen)"

#: ../../any.pm_.c:177
msgid "Restrict command line options"
msgstr "Begrense kommandolinje-opsjoner"

#: ../../any.pm_.c:177
msgid "restrict"
msgstr "begrense"

#: ../../any.pm_.c:179
msgid "Clean /tmp at each boot"
msgstr "T�m /tmp ved hver oppstart"

#: ../../any.pm_.c:180
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Presiser RAM-st�rrelse hvis det trengs (funnet %d MB)"

#: ../../any.pm_.c:182
msgid "Enable multi profiles"
msgstr "Sl� p� multiprofiler"

#: ../../any.pm_.c:186
msgid "Give the ram size in MB"
msgstr "Oppgi ram-st�rrelsen i MB"

#: ../../any.pm_.c:188
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opsjon ``Begrense kommandolinje-opsjoner'' kan ikke brukes uten et passord"

#: ../../any.pm_.c:189 ../../any.pm_.c:755
#: ../../diskdrake/interactive.pm_.c:1132
#: ../../install_steps_interactive.pm_.c:1112
msgid "Please try again"
msgstr "Vennligst pr�v igjen"

#: ../../any.pm_.c:189 ../../any.pm_.c:755
#: ../../install_steps_interactive.pm_.c:1112
msgid "The passwords do not match"
msgstr "Passordene stemmer ikke overens"

#: ../../any.pm_.c:197
msgid "Init Message"
msgstr "Initmelding"

#: ../../any.pm_.c:199
msgid "Open Firmware Delay"
msgstr "�pne firmwareforsinkelse"

#: ../../any.pm_.c:200
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"

#: ../../any.pm_.c:201
msgid "Enable CD Boot?"
msgstr "Skal det v�re mulig � boote fra CD?"

#: ../../any.pm_.c:202
msgid "Enable OF Boot?"
msgstr "Skal det v�re mulig � boote fra OF?"

#: ../../any.pm_.c:203
msgid "Default OS?"
msgstr "Standard operativsystem?"

#: ../../any.pm_.c:237
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"Her er de forskjellige oppf�ringene.\n"
"Du kan legge til flere eller endre de eksisterende."

#: ../../any.pm_.c:247 ../../standalone/drakbackup_.c:752
#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:772
#: ../../standalone/drakfont_.c:809
msgid "Add"
msgstr "Legg til"

#: ../../any.pm_.c:247 ../../any.pm_.c:766 ../../diskdrake/hd_gtk.pm_.c:153
#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
#: ../../interactive_http.pm_.c:153
msgid "Done"
msgstr "Ferdig"

#: ../../any.pm_.c:247
msgid "Modify"
msgstr "Modifiser"

#: ../../any.pm_.c:255
msgid "Which type of entry do you want to add?"
msgstr "Hvilken inngangstype vil du legge til"

#: ../../any.pm_.c:256 ../../standalone/drakbackup_.c:895
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:256
msgid "Other OS (SunOS...)"
msgstr "Andre OS (SunOS...)"

#: ../../any.pm_.c:257
msgid "Other OS (MacOS...)"
msgstr "Andre OS (MacOS...)"

#: ../../any.pm_.c:257
msgid "Other OS (windows...)"
msgstr "Andre OS (windows...)"

#: ../../any.pm_.c:276
msgid "Image"
msgstr "Bilde"

#: ../../any.pm_.c:277 ../../any.pm_.c:288
msgid "Root"
msgstr "Root"

#: ../../any.pm_.c:278 ../../any.pm_.c:307
msgid "Append"
msgstr "Tilf�ye"

#: ../../any.pm_.c:282
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:283
msgid "Read-write"
msgstr "Les-skriv"

#: ../../any.pm_.c:290
msgid "Table"
msgstr "Tabell"

#: ../../any.pm_.c:291
msgid "Unsafe"
msgstr "Usikker"

#: ../../any.pm_.c:298 ../../any.pm_.c:303 ../../any.pm_.c:306
msgid "Label"
msgstr "Etikett"

#: ../../any.pm_.c:300 ../../any.pm_.c:311
msgid "Default"
msgstr "Standard"

#: ../../any.pm_.c:308
msgid "Initrd-size"
msgstr "Initrdst�rrelse"

#: ../../any.pm_.c:310
msgid "NoVideo"
msgstr "Ingen video"

#: ../../any.pm_.c:318
msgid "Remove entry"
msgstr "Fjern inngang"

#: ../../any.pm_.c:321
msgid "Empty label not allowed"
msgstr "Tom etikett er ikke tillatt"

#: ../../any.pm_.c:322
msgid "You must specify a kernel image"
msgstr "Du m� velge ett kjernebilde"

#: ../../any.pm_.c:322
msgid "You must specify a root partition"
msgstr "Du m� ha en rotpartisjon"

#: ../../any.pm_.c:323
msgid "This label is already used"
msgstr "Denne etiketten er allerede i bruk"

#: ../../any.pm_.c:638
#, c-format
msgid "Found %s %s interfaces"
msgstr "Fant %s %s grensesnitt"

#: ../../any.pm_.c:639
msgid "Do you have another one?"
msgstr "Har du enda ett?"

#: ../../any.pm_.c:640
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Har du noen %s grensesnitt?"

#: ../../any.pm_.c:642 ../../any.pm_.c:814 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:1018
msgid "No"
msgstr "Nei"

#: ../../any.pm_.c:642 ../../any.pm_.c:813 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:1018
msgid "Yes"
msgstr "Ja"

#: ../../any.pm_.c:643
msgid "See hardware info"
msgstr "Se maskinvareinfo"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:677
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installerer driver for %s kort %s"

#: ../../any.pm_.c:678
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:689
#, c-format
msgid "Which %s driver should I try?"
msgstr "Hvilken %s driver skal jeg pr�ve?"

#: ../../any.pm_.c:697
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"I noen tilfeller trenger %s driveren � ha ekstra informasjon for � virke\n"
"ordentlig, selv om den normalt virker fint foruten. �nsker du � spesifisere "
"ekstra\n"
"opsjoner for den eller tillate driveren � sondere maskinen din for\n"
"informasjonen den trenger? Av og til vil sondering stoppe maskinen, men "
"burde\n"
"ikke for�rsake noen skader."

#: ../../any.pm_.c:702
msgid "Autoprobe"
msgstr "Automatisk sondering"

#: ../../any.pm_.c:702
msgid "Specify options"
msgstr "Spesifiser opsjoner"

#: ../../any.pm_.c:707
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: ../../any.pm_.c:713
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Du kan n� oppgi dens opsjoner for modul %s.\n"
"Opsjonene er i format ``navn=verdi navn2=verdi2 ...''.\n"
"F.eks., ``io=0x300 irq=7''"

#: ../../any.pm_.c:716
msgid "Module options:"
msgstr "Modulopsjoner:"

#: ../../any.pm_.c:727
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Lasting av modul %s feilet.\n"
"�nsker du � pr�ve igjen med andre parametere?"

#: ../../any.pm_.c:743
msgid "access to X programs"
msgstr "tilgang til X-programmer"

#: ../../any.pm_.c:744
msgid "access to rpm tools"
msgstr "tilgang til rpmverkt�y"

#: ../../any.pm_.c:745
msgid "allow \"su\""
msgstr "tilgang til \"su\""

#: ../../any.pm_.c:746
msgid "access to administrative files"
msgstr "tilgang til administrative filer"

#: ../../any.pm_.c:751
#, c-format
msgid "(already added %s)"
msgstr "(allerede lagt til %s)"

#: ../../any.pm_.c:756
msgid "This password is too simple"
msgstr "Dette passordet er for enkelt"

#: ../../any.pm_.c:757
msgid "Please give a user name"
msgstr "Vennligst oppgi et brukernavn"

#: ../../any.pm_.c:758
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brukernavnet kan kun inneholde sm� bokstaver, tall, `-' og `_'"

#: ../../any.pm_.c:759
msgid "This user name is already added"
msgstr "Denne brukeren er allerede lagt til"

#: ../../any.pm_.c:763
msgid "Add user"
msgstr "Legg til bruker"

#: ../../any.pm_.c:764
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Entre en bruker\n"
"%s"

#: ../../any.pm_.c:765
msgid "Accept user"
msgstr "Godta bruker"

#: ../../any.pm_.c:776
msgid "Real name"
msgstr "Virkelig navn"

#: ../../any.pm_.c:777 ../../printerdrake.pm_.c:702
#: ../../printerdrake.pm_.c:778
msgid "User name"
msgstr "Brukernavn"

#: ../../any.pm_.c:780
msgid "Shell"
msgstr "Skall"

#: ../../any.pm_.c:782
msgid "Icon"
msgstr "Ikon"

#: ../../any.pm_.c:810
msgid "Autologin"
msgstr "Autoinnlogging"

#: ../../any.pm_.c:811
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Jeg kan sette opp maskinen din til � automatisk logge p� en bruker ved "
"oppstart.\n"
"Vil du bruke denne tjenesten?"

#: ../../any.pm_.c:815
msgid "Choose the default user:"
msgstr "Velg standard bruker:"

#: ../../any.pm_.c:816
msgid "Choose the window manager to run:"
msgstr "Velg vindush�ndtereren som skal kj�res:"

#: ../../any.pm_.c:826
msgid "Please choose a language to use."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../any.pm_.c:828
msgid "You can choose other languages that will be available after install"
msgstr "Du kan velge andre spr�k som vil v�re tilgjengelige etter installasjon"

#: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:721
#: ../../standalone/drakxtv_.c:45
msgid "All"
msgstr "Alle"

#: ../../any.pm_.c:932
msgid "Allow all users"
msgstr "Tillat alle brukere"

#: ../../any.pm_.c:932 ../../install_steps_interactive.pm_.c:521
msgid "Custom"
msgstr "Skreddersydd"

#: ../../any.pm_.c:932
msgid "No sharing"
msgstr "Ingen deling"

#: ../../any.pm_.c:942 ../../network/smbnfs.pm_.c:45
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Pakken %s m� installeres. Vil du installere den?"

#: ../../any.pm_.c:945
msgid "You can export using NFS or Samba. Which one do you want"
msgstr "Du kan eksportere med NFS eller Samba. Hvilken av dem �nsker du"

#: ../../any.pm_.c:953 ../../network/smbnfs.pm_.c:49
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Obligatorisk pakke %s mangler"

#: ../../any.pm_.c:973
msgid "Launch userdrake"
msgstr "Start userdrake"

#: ../../any.pm_.c:975
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user in this group."
msgstr ""
"per-user deling bruker gruppen \"fileshare\". \n"
"Du kan bruke userdrake til � legge til en bruker i denne gruppen."

#: ../../any.pm_.c:1012
msgid "Welcome To Crackers"
msgstr "Velkommen til Crackers"

#: ../../any.pm_.c:1013
msgid "Poor"
msgstr "D�rlig"

#: ../../any.pm_.c:1014 ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Standard"

#: ../../any.pm_.c:1015
msgid "High"
msgstr "H�y"

#: ../../any.pm_.c:1016
msgid "Higher"
msgstr "H�yere"

#: ../../any.pm_.c:1017
msgid "Paranoid"
msgstr "Paranoid"

#: ../../any.pm_.c:1020
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Dette niv�et b�r brukes med forsiktighet. Det gj�r systemet ditt lettere �\n"
"bruke, men mer utsatt: det m� ikke brukes p� en maskin koblet til andre\n"
"eller til Internett. Det er ingen adgang med passord."

#: ../../any.pm_.c:1023
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Passord er n� aktivert, men bruk som nettverksmaskin er fortsatt ikke "
"anbefalt."

#: ../../any.pm_.c:1024
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Dette er standard sikkerhet anbefalt for en maskin som vil bli brukt til "
"tilkobling mot Internett som klient."

#: ../../any.pm_.c:1025
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Det er allerede noen restriksjoner, og flere automatiske kontroller kj�res "
"hver natt."

#: ../../any.pm_.c:1026
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should better choose a lower level."
msgstr ""
"Med dette sikkerhetsniv�et kan systemet brukes som tjener.\n"
"Sikkerheten er n� h�y nok til � bruke systemet som en tjener som godtar\n"
"oppkoblinger fra mange klienter. Merk: Hvis maskinen din kun er en klient p� "
"Internett burde du velge et lavere niv�."

#: ../../any.pm_.c:1029
msgid ""
"Based on the previous level, but the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"Basert p� forrige niv�, men n� er systemet fullstendig stengt.\n"
"Sikkerhetsfunksjonene er n� p� maksimum."

#: ../../any.pm_.c:1035
msgid "Choose security level"
msgstr "Velg sikkerhetsniv�"

#: ../../any.pm_.c:1038
msgid "Security level"
msgstr "Sikkerhetsniv�"

#: ../../any.pm_.c:1040
msgid "Use libsafe for servers"
msgstr "Bruk libsafe for tjenere"

#: ../../any.pm_.c:1041
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Ett bibliotek som beskytter mot buffer overflow og strengformateringsangrep."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:336
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Velkommen til %s, operativsystem-velgeren!\n"
"\n"
"Velg et operativsystem fra listen over eller\n"
"vent %d sekunder for standard oppstart.\n"
"\n"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:904
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Velkommen til GRUB, operativsystem-velgeren!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:907
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Bruk %c og %c tastene for � velge hvilken inngang som er markert."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:910
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Trykk enter for � starte opp valgt OS, 'e' for � redigere"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:913
msgid "commands before booting, or 'c' for a command-line."
msgstr "kommandoer for oppstart, eller 'c' for en kommandolinje."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:916
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Den markerte inngangen vil bli startet automatisk om %d sekunder."

#: ../../bootloader.pm_.c:920
msgid "not enough room in /boot"
msgstr "ikke nok plass i /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:1020
msgid "Desktop"
msgstr "Skrivebord"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:1022
msgid "Start Menu"
msgstr "Startmeny"

#: ../../bootloader.pm_.c:1041
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Du kan ikke installere oppstartslasteren p� en %s partisjon\n"

#: ../../bootlook.pm_.c:46
msgid "no help implemented yet.\n"
msgstr "ingen hjelp implementert enn�.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Oppstartsstilkonfigurasjon"

#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
msgid "/_File"
msgstr "/_Fil"

#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
msgid "/File/_Quit"
msgstr "/Fil/_Avslutt"

#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "NewStyle Categorizing Monitor"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "NewStyle Monitor"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "Tradisjonell monitor"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Tradisjonell Gtk+ monitor"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "Start Aurora ved oppstart"

#: ../../bootlook.pm_.c:100
msgid "Lilo/grub mode"
msgstr "Lilo/grub modus"

#: ../../bootlook.pm_.c:103
#, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Du bruker for �yeblikket %s som oppstartsh�ndterer.\n"
"Klikk p� Konfigurer for � starte oppsett-hjelperen."

#: ../../bootlook.pm_.c:105 ../../standalone/drakbackup_.c:1467
#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:706
#: ../../standalone/tinyfirewall_.c:59
msgid "Configure"
msgstr "Konfigurer"

#: ../../bootlook.pm_.c:140
msgid "System mode"
msgstr "Systemmodus"

#: ../../bootlook.pm_.c:142
msgid "Launch the X-Window system at start"
msgstr "Start W-Windowsystemet ved oppstart"

#: ../../bootlook.pm_.c:147
msgid "No, I don't want autologin"
msgstr "Nei, jeg vil ikke ha autologin"

#: ../../bootlook.pm_.c:149
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Ja, jeg vil ha autologin med denne (bruker; skrivebord)"

#: ../../bootlook.pm_.c:159 ../../standalone/drakbackup_.c:2441
#: ../../standalone/drakbackup_.c:3345 ../../standalone/drakfont_.c:532
#: ../../standalone/drakfont_.c:638 ../../standalone/drakfont_.c:702
#: ../../standalone/drakfont_.c:748 ../../standalone/draknet_.c:109
#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
#: ../../standalone/draknet_.c:435 ../../standalone/draknet_.c:521
#: ../../standalone/draknet_.c:564 ../../standalone/draknet_.c:665
#: ../../standalone/logdrake_.c:491
msgid "OK"
msgstr "OK"

#: ../../bootlook.pm_.c:160 ../../diskdrake/smbnfs_gtk.pm_.c:85
#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_gtk.pm_.c:521
#: ../../install_steps_interactive.pm_.c:596 ../../interactive.pm_.c:142
#: ../../interactive.pm_.c:317 ../../interactive.pm_.c:349
#: ../../interactive_stdio.pm_.c:141 ../../my_gtk.pm_.c:687
#: ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1559
#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:750
#: ../../standalone/drakgw_.c:712 ../../standalone/draknet_.c:116
#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
#: ../../standalone/draknet_.c:537 ../../standalone/draknet_.c:679
#: ../../standalone/logdrake_.c:217 ../../standalone/logdrake_.c:498
#: ../../standalone/tinyfirewall_.c:65
msgid "Cancel"
msgstr "Avbryt"

#: ../../bootlook.pm_.c:228
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "kan ikke �pne /etc/inittab for lesing: %s"

#: ../../common.pm_.c:94
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:94
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:94
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:102
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:110
#, c-format
msgid "%d minutes"
msgstr "%d minutter"

#: ../../common.pm_.c:112
msgid "1 minute"
msgstr "1 minutt"

#: ../../common.pm_.c:114
#, c-format
msgid "%d seconds"
msgstr "%d sekunder"

#: ../../common.pm_.c:159
msgid "Can't make screenshots before partitioning"
msgstr "Jeg kan ikke ta skjembilder f�r partisjonering."

#: ../../common.pm_.c:166
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Skjermbilder vil v�re tilgjengelig etter installasjon i %s"

#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:41
msgid "France"
msgstr "Frankrike"

#: ../../crypto.pm_.c:13
msgid "Costa Rica"
msgstr "Costa Rica"

#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
msgid "Belgium"
msgstr "Belgia"

#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
msgid "Czech Republic"
msgstr "Tjekkia"

#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
msgid "Germany"
msgstr "Germany"

#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
msgid "Greece"
msgstr "Hellas"

#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
msgid "Norway"
msgstr "Norge"

#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
msgid "Sweden"
msgstr "Sverige"

#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
msgid "Netherlands"
msgstr "Netherlands"

#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:41
msgid "Italy"
msgstr "Italia"

#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
msgid "Austria"
msgstr "�sterrike"

#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
msgid "United States"
msgstr "USA"

#: ../../diskdrake/hd_gtk.pm_.c:94
msgid "Please make a backup of your data first"
msgstr "Vennligst ta sikkerhetskopi av din data f�rst"

#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:888
#: ../../diskdrake/interactive.pm_.c:897 ../../diskdrake/interactive.pm_.c:951
msgid "Read carefully!"
msgstr "Les n�ye!"

#: ../../diskdrake/hd_gtk.pm_.c:97
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Hvis du skal bruke aboot, v�re n�ye med � la det v�re ledig plass (2048 "
"sektorer er nok)\n"
"ved begynnelsen av disken"

#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
#: ../../install_steps.pm_.c:72 ../../install_steps_interactive.pm_.c:67
#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
msgid "Error"
msgstr "Feil"

#: ../../diskdrake/hd_gtk.pm_.c:151
msgid "Wizard"
msgstr "Wizard"

#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
msgid "Choose action"
msgstr "Velg handling"

#: ../../diskdrake/hd_gtk.pm_.c:185
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Du har en stor FAT partisjon\n"
"(vanligvis brukt av Microsoft Dos/Windows).\n"
"Jeg forsl�r at du f�rst endrer st�rrelsen p� denne partisjonen\n"
"(klikk p� den, klikk s� p� \"Endre st�rrelse\")"

#: ../../diskdrake/hd_gtk.pm_.c:188
msgid "Please click on a partition"
msgstr "Vennligst klikk p� en partisjon"

#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
#: ../../install_steps_gtk.pm_.c:522
msgid "Details"
msgstr "Detaljer"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "Journalised FS"
msgstr "Journal filsystem"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm_.c:320
msgid "Swap"
msgstr "Veksel"

#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1047
msgid "Empty"
msgstr "Tom"

#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:378
#: ../../install_steps_gtk.pm_.c:438 ../../mouse.pm_.c:162
#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
msgid "Other"
msgstr "Andre"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "Filesystem types:"
msgstr "Filsystemtyper:"

#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
msgid "Create"
msgstr "Opprett"

#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
msgid "Type"
msgstr "Type"

#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
#, c-format
msgid "Use ``%s'' instead"
msgstr "Bruk ``%s'' istedet"

#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
msgid "Delete"
msgstr "Slett"

#: ../../diskdrake/hd_gtk.pm_.c:348
msgid "Use ``Unmount'' first"
msgstr "Bruk ``Demonter'' f�rst"

#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Etter endring av type p� partisjon %s, vil alle data p� denne partisjonen g� "
"tapt"

#: ../../diskdrake/interactive.pm_.c:171
msgid "Choose a partition"
msgstr "Velg en partisjon"

#: ../../diskdrake/interactive.pm_.c:171
msgid "Choose another partition"
msgstr "Velg en annen partisjon"

#: ../../diskdrake/interactive.pm_.c:196
msgid "Exit"
msgstr "Avslutt"

#: ../../diskdrake/interactive.pm_.c:218
msgid "Toggle to expert mode"
msgstr "Skift til ekspertmodus"

#: ../../diskdrake/interactive.pm_.c:218
msgid "Toggle to normal mode"
msgstr "Skift til normalmodus"

#: ../../diskdrake/interactive.pm_.c:218
msgid "Undo"
msgstr "Angre"

#: ../../diskdrake/interactive.pm_.c:237
msgid "Continue anyway?"
msgstr "Fortsette likevel?"

#: ../../diskdrake/interactive.pm_.c:242
msgid "Quit without saving"
msgstr "Avslutt uten � lagre"

#: ../../diskdrake/interactive.pm_.c:242
msgid "Quit without writing the partition table?"
msgstr "Avslutt uten � skrive partisjonstabellen?"

#: ../../diskdrake/interactive.pm_.c:247
msgid "Do you want to save /etc/fstab modifications"
msgstr "�nsker du � lagre modifiseringen av /etc/fstab"

#: ../../diskdrake/interactive.pm_.c:259
msgid "Auto allocate"
msgstr "Automatisk allokering"

#: ../../diskdrake/interactive.pm_.c:259
msgid "Clear all"
msgstr "Fjern alle"

#: ../../diskdrake/interactive.pm_.c:262
msgid "Hard drive information"
msgstr "Harddisk informasjon"

#: ../../diskdrake/interactive.pm_.c:283
msgid "All primary partitions are used"
msgstr "Alle prim�re partisjoner er i bruk"

#: ../../diskdrake/interactive.pm_.c:284
msgid "I can't add any more partition"
msgstr "Jeg kan ikke legge til flere partisjoner"

#: ../../diskdrake/interactive.pm_.c:285
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"For � ha flere partisjoner vennligst slett en for � kunne opprette en "
"utvidet partisjon"

#: ../../diskdrake/interactive.pm_.c:295
msgid "Save partition table"
msgstr "Lagre partisjonstabeller"

#: ../../diskdrake/interactive.pm_.c:296
msgid "Restore partition table"
msgstr "Redde partisjonstabell"

#: ../../diskdrake/interactive.pm_.c:297
msgid "Rescue partition table"
msgstr "N�dpartisjonstabell"

#: ../../diskdrake/interactive.pm_.c:299
msgid "Reload partition table"
msgstr "Last partisjonstabell p� nytt"

#: ../../diskdrake/interactive.pm_.c:304
msgid "Removable media automounting"
msgstr "Fjernbart media automontering"

#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
msgid "Select file"
msgstr "Velg fil"

#: ../../diskdrake/interactive.pm_.c:320
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Kopien av partisjonstabellen har ikke samme st�rrelse\n"
"Fortsette for det?"

#: ../../diskdrake/interactive.pm_.c:334
msgid "Warning"
msgstr "Advarsel"

#: ../../diskdrake/interactive.pm_.c:335
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Sett inn en diskett i stasjonen\n"
"Alle data p� denne disketten vil g� tapt"

#: ../../diskdrake/interactive.pm_.c:346
msgid "Trying to rescue partition table"
msgstr "Pr�ver � redde partisjonstabell"

#: ../../diskdrake/interactive.pm_.c:352
msgid "Detailed information"
msgstr "Detaljert informasjon"

#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
msgid "Mount point"
msgstr "Monteringspunkt"

#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
msgid "Options"
msgstr "Valg"

#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
msgid "Resize"
msgstr "Endre st�rrelse"

#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:672
msgid "Move"
msgstr "Flytt"

#: ../../diskdrake/interactive.pm_.c:369
msgid "Format"
msgstr "Formater"

#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
msgid "Mount"
msgstr "Monter"

#: ../../diskdrake/interactive.pm_.c:371
msgid "Add to RAID"
msgstr "Legg til RAID"

#: ../../diskdrake/interactive.pm_.c:372
msgid "Add to LVM"
msgstr "Legg til LVM"

#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
msgid "Unmount"
msgstr "Demonter"

#: ../../diskdrake/interactive.pm_.c:375
msgid "Remove from RAID"
msgstr "Fjern fra RAID"

#: ../../diskdrake/interactive.pm_.c:376
msgid "Remove from LVM"
msgstr "Fjern fra LVM"

#: ../../diskdrake/interactive.pm_.c:377
msgid "Modify RAID"
msgstr "Modifiser RAID"

#: ../../diskdrake/interactive.pm_.c:378
msgid "Use for loopback"
msgstr "Bruk for loopback"

#: ../../diskdrake/interactive.pm_.c:417
msgid "Create a new partition"
msgstr "Opprette en ny partisjon"

#: ../../diskdrake/interactive.pm_.c:420
msgid "Start sector: "
msgstr "Start sektor: "

#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:771
msgid "Size in MB: "
msgstr "St�rrelse i MB: "

#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:772
msgid "Filesystem type: "
msgstr "Filsystemtype: "

#: ../../diskdrake/interactive.pm_.c:424
#: ../../diskdrake/interactive.pm_.c:1031
#: ../../diskdrake/interactive.pm_.c:1105
msgid "Mount point: "
msgstr "Monteringspunkt: "

#: ../../diskdrake/interactive.pm_.c:428
msgid "Preference: "
msgstr "Valg: "

#: ../../diskdrake/interactive.pm_.c:472
msgid "Remove the loopback file?"
msgstr "Fjern loopbackfilen?"

#: ../../diskdrake/interactive.pm_.c:497
msgid "Change partition type"
msgstr "Endre partisjonstype"

#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
msgid "Which filesystem do you want?"
msgstr "Hvilket filsystem �nsker du?"

#: ../../diskdrake/interactive.pm_.c:502
msgid "Switching from ext2 to ext3"
msgstr "Bytter fra ext2 til ext3"

#: ../../diskdrake/interactive.pm_.c:532
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Hvor vil du montere loopback-filen %s?"

#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Hvor vil du montere %s enheten?"

#: ../../diskdrake/interactive.pm_.c:539
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Kan ikke fjerne monteringspunkt da denne partisjonen blir brukt til\n"
"loopback. Fjern loopback f�rst"

#: ../../diskdrake/interactive.pm_.c:577
msgid "Computing FAT filesystem bounds"
msgstr "Beregner fat filsystemgrense"

#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
#: ../../install_interactive.pm_.c:130
msgid "Resizing"
msgstr "Endrer st�rrelse"

#: ../../diskdrake/interactive.pm_.c:609
msgid "This partition is not resizeable"
msgstr "Denne partisjonen kan ikke st�rrelsen forandres p�"

#: ../../diskdrake/interactive.pm_.c:614
msgid "All data on this partition should be backed-up"
msgstr "Alle data p� denne partisjonen burde sikkerhetskopieres"

#: ../../diskdrake/interactive.pm_.c:616
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Etter endring av st�rrelse for partisjon %s, vil alle data p� denne\n"
"partisjonen vil g� tapt"

#: ../../diskdrake/interactive.pm_.c:621
msgid "Choose the new size"
msgstr "Velg den nye st�rrelsen"

#: ../../diskdrake/interactive.pm_.c:622
msgid "New size in MB: "
msgstr "Ny st�rrelse i MB: "

#: ../../diskdrake/interactive.pm_.c:673
msgid "Which disk do you want to move it to?"
msgstr "Hvilken disk vil du flytte til?"

#: ../../diskdrake/interactive.pm_.c:674
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake/interactive.pm_.c:675
msgid "Which sector do you want to move it to?"
msgstr "Hvilken sektor vil du flytte til?"

#: ../../diskdrake/interactive.pm_.c:678
msgid "Moving"
msgstr "Flytter"

#: ../../diskdrake/interactive.pm_.c:678
msgid "Moving partition..."
msgstr "Flytter partisjon..."

#: ../../diskdrake/interactive.pm_.c:695
msgid "Choose an existing RAID to add to"
msgstr "Velg en eksisterende RAID for � legge til"

#: ../../diskdrake/interactive.pm_.c:696 ../../diskdrake/interactive.pm_.c:714
msgid "new"
msgstr "ny"

#: ../../diskdrake/interactive.pm_.c:712
msgid "Choose an existing LVM to add to"
msgstr "Velg en eksisterende LVM for � legge til"

#: ../../diskdrake/interactive.pm_.c:717
msgid "LVM name?"
msgstr "LVM navn?"

#: ../../diskdrake/interactive.pm_.c:757
msgid "This partition can't be used for loopback"
msgstr "Denne partisjonen kan ikke brukes for loopback"

#: ../../diskdrake/interactive.pm_.c:769
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake/interactive.pm_.c:770
msgid "Loopback file name: "
msgstr "Loopback filnavn: "

#: ../../diskdrake/interactive.pm_.c:775
msgid "Give a file name"
msgstr "Gi ett filnavn"

#: ../../diskdrake/interactive.pm_.c:778
msgid "File already used by another loopback, choose another one"
msgstr "Filen blir allerede brukt av en annen loopback, velg en annen"

#: ../../diskdrake/interactive.pm_.c:779
msgid "File already exists. Use it?"
msgstr "Filen eksisterer allerede. Bruke denne?"

#: ../../diskdrake/interactive.pm_.c:802
msgid "Mount options"
msgstr "Monteringsvalg:"

#: ../../diskdrake/interactive.pm_.c:809
msgid "Various"
msgstr "Diverse"

#: ../../diskdrake/interactive.pm_.c:871
msgid "device"
msgstr "enhet"

#: ../../diskdrake/interactive.pm_.c:872
msgid "level"
msgstr "niv�"

#: ../../diskdrake/interactive.pm_.c:873
msgid "chunk size"
msgstr "skivest�rrelse"

#: ../../diskdrake/interactive.pm_.c:888
msgid "Be careful: this operation is dangerous."
msgstr "V�r forsiktig: denne operasjonen er farlig."

#: ../../diskdrake/interactive.pm_.c:903
msgid "What type of partitioning?"
msgstr "Hva slags type partisjonering?"

#: ../../diskdrake/interactive.pm_.c:921
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Beklager, jeg vil ikke tillate oppretting av /boot s� lange inne p� disken "
"(p� en sylinder > 1024).\n"
"Enten bruker du LILO og denne ikke virker, eller du bruker ikke LILO og du "
"trenger ikke /boot"

#: ../../diskdrake/interactive.pm_.c:925
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Partisjonen du valgte � legge til som root (/) er lokalisert fysisk "
"bortenfor\n"
"den 1024'de sylinderen p� hard-disken, og du har ingen /boot partisjon.\n"
"Hvis du skal bruke oppstartsh�ndtereren LILO, v�r n�ye med � legge til en\n"
"/boot partisjon"

#: ../../diskdrake/interactive.pm_.c:931
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Du har valgt en programvare RAID partisjon som root (/).\n"
"Ingen oppstartslaster kan h�ndtere dette uten en /boot partisjon.\n"
"S� v�r n�ye med � legge til en /boot partisjon"

#: ../../diskdrake/interactive.pm_.c:951
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partisjonstabellen p� disk %s blir n� skrevet til disk!"

#: ../../diskdrake/interactive.pm_.c:955
msgid "You'll need to reboot before the modification can take place"
msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"

#: ../../diskdrake/interactive.pm_.c:966
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Etter formatering av partisjon %s vil alle data p� denne partisjonen\n"
"g� tapt"

#: ../../diskdrake/interactive.pm_.c:968
msgid "Formatting"
msgstr "Formatering"

#: ../../diskdrake/interactive.pm_.c:969
#, c-format
msgid "Formatting loopback file %s"
msgstr "Formaterer loopback-fil %s"

#: ../../diskdrake/interactive.pm_.c:970
#: ../../install_steps_interactive.pm_.c:465
#, c-format
msgid "Formatting partition %s"
msgstr "Formaterer partisjon %s"

#: ../../diskdrake/interactive.pm_.c:981
msgid "Hide files"
msgstr "Gjem filer"

#: ../../diskdrake/interactive.pm_.c:981
msgid "Move files to the new partition"
msgstr "Flytt filer til en ny partisjon"

#: ../../diskdrake/interactive.pm_.c:982
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""
"Katalogen %s inneholder allerede noe data\n"
"(%s)"

#: ../../diskdrake/interactive.pm_.c:993
msgid "Moving files to the new partition"
msgstr "Flytt filer til en ny partisjon"

#: ../../diskdrake/interactive.pm_.c:997
#, c-format
msgid "Copying %s"
msgstr "Kopierer %s"

#: ../../diskdrake/interactive.pm_.c:1001
#, c-format
msgid "Removing %s"
msgstr "Fjerner %s"

#: ../../diskdrake/interactive.pm_.c:1011
#, c-format
msgid "partition %s is now known as %s"
msgstr "partisjon %s er n� kjent som %s"

#: ../../diskdrake/interactive.pm_.c:1032
#: ../../diskdrake/interactive.pm_.c:1091
msgid "Device: "
msgstr "Enhet: "

#: ../../diskdrake/interactive.pm_.c:1033
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS diskbokstav: %s (bare en gjetning)\n"

#: ../../diskdrake/interactive.pm_.c:1037
#: ../../diskdrake/interactive.pm_.c:1045
#: ../../diskdrake/interactive.pm_.c:1109
msgid "Type: "
msgstr "Type: "

#: ../../diskdrake/interactive.pm_.c:1041
msgid "Name: "
msgstr "Navn: "

#: ../../diskdrake/interactive.pm_.c:1049
#, c-format
msgid "Start: sector %s\n"
msgstr "Start: sektor %s\n"

#: ../../diskdrake/interactive.pm_.c:1050
#, c-format
msgid "Size: %s"
msgstr "St�rrelse: %s"

#: ../../diskdrake/interactive.pm_.c:1052
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorer"

#: ../../diskdrake/interactive.pm_.c:1054
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Sylinder %d til %d\n"

#: ../../diskdrake/interactive.pm_.c:1055
msgid "Formatted\n"
msgstr "Formatert\n"

#: ../../diskdrake/interactive.pm_.c:1056
msgid "Not formatted\n"
msgstr "Ikke formatert\n"

#: ../../diskdrake/interactive.pm_.c:1057
msgid "Mounted\n"
msgstr "Montert\n"

#: ../../diskdrake/interactive.pm_.c:1058
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm_.c:1060
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback-fil(er): \n"
"   %s\n"

#: ../../diskdrake/interactive.pm_.c:1061
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partisjon startet opp som standard\n"
"    (for MS-DOS oppstart, ikke for lilo)\n"

#: ../../diskdrake/interactive.pm_.c:1063
#, c-format
msgid "Level %s\n"
msgstr "Niv� %s\n"

#: ../../diskdrake/interactive.pm_.c:1064
#, c-format
msgid "Chunk size %s\n"
msgstr "Skivest�rrelse %s\n"

#: ../../diskdrake/interactive.pm_.c:1065
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-disker %s\n"

#: ../../diskdrake/interactive.pm_.c:1067
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback filnavn: %s"

#: ../../diskdrake/interactive.pm_.c:1070
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Det er store sjanser for at\n"
"denne partisjonen er en\n"
"driverpartisjon, du b�r nok\n"
"la den v�re i fred.\n"

#: ../../diskdrake/interactive.pm_.c:1073
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Denne spesielle Bootstrap-\n"
"partisjonen er for �\n"
"dual-boote ditt system.\n"

#: ../../diskdrake/interactive.pm_.c:1092
#, c-format
msgid "Size: %s\n"
msgstr "St�rrelse: %s\n"

#: ../../diskdrake/interactive.pm_.c:1093
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"

#: ../../diskdrake/interactive.pm_.c:1094
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake/interactive.pm_.c:1095
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disker %s\n"

#: ../../diskdrake/interactive.pm_.c:1096
#, c-format
msgid "Partition table type: %s\n"
msgstr "Type partisjonstabell: %s\n"

#: ../../diskdrake/interactive.pm_.c:1097
#, c-format
msgid "on bus %d id %d\n"
msgstr "p� buss %d id %d\n"

#: ../../diskdrake/interactive.pm_.c:1111
#, c-format
msgid "Options: %s"
msgstr "Valg: %s"

#: ../../diskdrake/interactive.pm_.c:1127
msgid "Filesystem encryption key"
msgstr "Filsystemkrypteringsn�kkel"

#: ../../diskdrake/interactive.pm_.c:1128
msgid "Choose your filesystem encryption key"
msgstr "Velg din filsystemkrypteringsn�kkel"

#: ../../diskdrake/interactive.pm_.c:1131
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "Denne krypteringsn�kkelen er for enkel (m� v�re minst %d tegn lang)"

#: ../../diskdrake/interactive.pm_.c:1132
msgid "The encryption keys do not match"
msgstr "Krypteringsn�kkelene stemmer ikke overens"

#: ../../diskdrake/interactive.pm_.c:1135
msgid "Encryption key"
msgstr "Krypteringsn�kkel"

#: ../../diskdrake/interactive.pm_.c:1136
msgid "Encryption key (again)"
msgstr "Krypteringsn�kkel (igjen)"

#: ../../diskdrake/removable.pm_.c:47
msgid "Change type"
msgstr "Endre type"

#: ../../diskdrake/removable_gtk.pm_.c:28
msgid "Please click on a media"
msgstr "Vennligst klikk p� ett media"

#: ../../diskdrake/smbnfs_gtk.pm_.c:165
msgid "Search servers"
msgstr "S�k tjenere"

#: ../../fs.pm_.c:477 ../../fs.pm_.c:487 ../../fs.pm_.c:491 ../../fs.pm_.c:495
#: ../../fs.pm_.c:499 ../../fs.pm_.c:503
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering av %s mislykket"

#: ../../fs.pm_.c:540
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Jeg vet ikke hvordan formatere %s i type %s"

#: ../../fs.pm_.c:612 ../../fs.pm_.c:641 ../../fs.pm_.c:647
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: ../../fs.pm_.c:632
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr "fsck avsluttet med feilkode %d eller signal %d"

#: ../../fs.pm_.c:662 ../../partition_table.pm_.c:596
#, c-format
msgid "error unmounting %s: %s"
msgstr "feil ved demontering av %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "enkel"

#: ../../fsedit.pm_.c:25
msgid "with /usr"
msgstr ""

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "server"

#: ../../fsedit.pm_.c:467
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Du kan ikke bruke JFS for partisjoner mindre enn 16 MB"

#: ../../fsedit.pm_.c:468
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Du kan ikke bruke ReiserFS for partisjoner mindre enn 32MB"

#: ../../fsedit.pm_.c:477
msgid "Mount points must begin with a leading /"
msgstr "Monteringspunkter m� begynne med /"

#: ../../fsedit.pm_.c:478
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Det finnes allerede en partisjon med monteringspunkt %s\n"

#: ../../fsedit.pm_.c:482
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"

#: ../../fsedit.pm_.c:484
msgid "This directory should remain within the root filesystem"
msgstr "Denne katalogen b�r forbli i root filsystemet"

#: ../../fsedit.pm_.c:486
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr ""
"Du trenger et virkelig filsystem (ext2, reiserfs) for dette "
"monteringspunktet\n"

#: ../../fsedit.pm_.c:488
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Du kan ikke bruke ett kryptert filsystem som monteringspunkt %s"

#: ../../fsedit.pm_.c:546
msgid "Not enough free space for auto-allocating"
msgstr "Ikke nok plass for auto-allokering"

#: ../../fsedit.pm_.c:548
msgid "Nothing to do"
msgstr "Ikkenoe � gj�re"

#: ../../fsedit.pm_.c:612
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Feil ved �pning av %s for skriving: %s"

#: ../../fsedit.pm_.c:697
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"En feil har oppst�tt - ingen gyldige enheter ble funnet for � opprette nye "
"filsystemer. Vennligst sjekk maskinvaren din for �rsaken til dette problemet"

#: ../../fsedit.pm_.c:720
msgid "You don't have any partitions!"
msgstr "Du har ingen partisjoner!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""
"GNU/Linux er ett multibrukersystem, og dette betyr at hver bruker kan ha "
"sine\n"
"instillinger, sine egne filer osv. Du kan lese brukerguiden for � f� vite "
"mer.\n"
"Men i motsetning til root, som er administratoren, s� vil brukerene du "
"legger til\n"
"her ikke ha rett til � forandre noe annet enn deres egne filer "
"ogkonfigurasjon.\n"
"Du m� lage minst en bruker for deg selv.\n"
"Denne kontoen b�r du bruke for all rutinebruk. Selv om det er praktisk � "
"logge\n"
"inn som root hver dag, kan deg ogs� v�re veldig farlig! Den minste feil "
"kunne\n"
"bety at systemet ditt ikke lenger virker. Hvis du gj�r en stor feil som en "
"vanlig\n"
"bruker vil du kunne miste noe informasjon, men ikke hele systemet.\n"
"\n"
"F�rst m� du skrive inn ditt virkelige navn. Dette er ikke n�dvendig, da du "
"kan\n"
"skrive inn hva du vil. drakX vil ta det f�rste ordet du legger inn og "
"foresl� det som\n"
"brukernavn. Dette er det brukernavnet den brukeren vil bruke for � logge seg "
"p�\n"
"systemet. Du kan forandre det. Du m� legge inn ett passord her. En "
"ikkepriviligert\n"
"brukers passord er ikke s� viktig som root sitt sett i fra "
"systemsikkerhetens side,\n"
"men det er ingen grunn til ignorere det av den grunn, det er dine filer som "
"er i \n"
"faresonen.\n"
"\n"
"Hvis du klikker p� aksepter bruker kan du da legge til s� mange brukere som "
"du\n"
"vil. N�r du har lagt til alle de brukerene du �nsker, klikk p� ferdig.\n"
"\n"
"Ved � klikke p� avansert kan du forandre hvilket shell brukeren har som "
"standard.\n"
"(Det vanlige er bash)"

#: ../../help.pm_.c:41
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Ovenfor nevnes de eksisterende Linux partisjonene oppdaget p�\n"
"harddisken din. Du kan beholde valg som er gjort av hjelperen, de er gode "
"for vanlig\n"
"bruk. Du kan endre disse valgene, du m� i hvertfall definere en root\n"
"partisjon (\"/\"). Ikke velg for liten partisjon ellers vil du ikke kunne\n"
"installere nok programvare. Hvis du �nsker � lagre dine data p� en separat "
"partisjon\n"
"m� du ogs� velge en \"/home\" (bare mulig hvis du har mer enn en\n"
"Linux partisjon tilgjengelig).\n"
"\n"
"\n"
"For informasjon, hver partisjon er listet som f�lger: \"Navn\", \"Kapasitet"
"\".\n"
"\n"
"\n"
"\"Navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
"\"partisjon nummer\" (f.eks., \"hda1\").\n"
"\n"
"\n"
"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
"\"\n"
"hvis den er en SCSI harddisk.\n"
"\n"
"\n"
"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
"IDE harddisker:\n"
"\n"
"   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
"\n"
"   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
"\n"
"\n"
"Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
"\"sekund�r harddisk\", etc..."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""
"Mandrake Linux installasjonen er spredd ut over flere CDROMer. DrakX \n"
"vet om en pakke er p� en annen CDROM og vil spytte ut den v�v�rende\n"
"CD og be deg sette i en annen en ved behov."

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CD-ROM, you will first\n"
"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, "
"select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose "
"the\n"
"desired group(s).\n"
"\n"
" * \"Server\": if the machine is intended to be a server, you will be able\n"
"to select which of the most common services you wish to see installed on\n"
"the machine.\n"
"\n"
" * \"Graphical Environment\": finally, this is where you will choose your\n"
"preferred graphical environment. At least one must be selected if you want\n"
"to have a graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you deselect all groups when performing a regular\n"
"installation (by opposition to an upgrade), a dialog will popup proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\" Install the fewer packages possible for having a working\n"
"graphical desktop;\n"
"\n"
" * \"With basic documentation\" Installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server.\n"
"\n"
" * \"Truly minimal install\" Will install the strict minimum necessary to\n"
"get a working Linux system, in command line only. This installation is\n"
"about 65Mb large.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Det er n� p� tide � spesifisere hvilke programmer du �nsker � installere p�\n"
"systemet ditt. Det er tusenvis av pakker tilgjengelig for Mandrake Linux, og "
"det er ikke meningen at du skal kunne navnet p� samtlige.\n"
"\n"
"Hvis du utf�rer en standard installasjon fra CDROM, vil du f�rst bli bedt "
"om\n"
"� spesifisere de CDene du har for �yeblikket (kun i ekspertmodus). Sjekk "
"CDene\n"
"og velg de bokser som tilsvarer de CDer som du har klare for installasjon.\n"
"Klikk \"OK\" n�r du er klar til � fortsette.\n"
"\n"
"Pakkene er delt inn i grupper som korresponderer til typisk bruk av din "
"maskin\n"
"Gruppene er igjen delt inn i fire seksjoner:\n"
"\n"
" *�\"Arbeidsstasjon\": hvis du planlagger � bruke din maskin som "
"arbeidsstasjon, velg\n"
"en eller flere av de tilh�rende grupper.\n"
"\n"
" * \"Utvikling\": hvis maskinen skal brukes til programmering, velg �nskede "
"grupper.\n"
"\n"
" * \"Server\": Hvis maskinen skal brukes som server, vil du kunne velge\n"
"hvilke av de mest vanlige tjenester som du �nsker installert p�\n"
"maskinen.\n"
"\n"
" * \"Grafisk milj�\": til slutt, det er her du kan velge ditt �nskede\n"
"grafiske milj�. Du m� velge minst ett hvis du �nsker � ha en grafisk\n"
"arbeidsstasjon!\n"
"\n"
"Ved � flytte musepekeren over et gruppenavn vil en kort forklarende tekst\n"
"dukke opp over den gruppen. Hvis du �nsker � ikke velge noen grupper under\n"
"installasjon (og du ikke oppgraderer), s� vil en dialog sp�rre deg om hva\n"
"slags minimal installasjon du �nsker:\n"
"\n"
"* \"Med X\" For en minste installasjon med X-tjener inkludert;\n"
"\n"
" * \"With basic documentation\" Installerer basesystemet pluss standard\n"
"verkt�y og dokumentasjon for disse. Denne installasjonen passer til � sette\n"
"opp en server.\n"
"\n"
" * \"Truly minimal install\" vil installere minimum som er n�dvendig for �\n"
"Linux systemet opp og g�, kun kommandolinje. Denne installasjonen er p�\n"
"rundt 65Mb.\n"
"\n"
"Du kan merke av \"Individual package selection\" boksen, som er nyttig\n"
"hvis du kjenner til pakkene som blir tilbydt eller hvis du �nsker � ha\n"
"total kontroll over hva som vil bli installert.\n"
"\n"
"Hvis du startet installasjonen i \"Upgrade\" modus, kan du velge vekk alle\n"
"grupper for � unng� � installere noen nye pakker. Dette er nyttig for\n"
"reparasjon eller oppdatering av et eksisterende system."

#: ../../help.pm_.c:128
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""

#: ../../help.pm_.c:164
msgid ""
"You are now proposed to setup your internet/network connection. If you wish\n"
"to connect your computer to the Internet or to a local network, click\n"
"\"OK\". The autodetection of network devices and modem will be launched. If\n"
"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
"may also choose not to configure the network, or do it later; in that case\n"
"simply click the \"Cancel\" button.\n"
"\n"
"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:186
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""

#: ../../help.pm_.c:203
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
"local time according to the time zone you selected. It is however possible\n"
"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
"hardware clock is the same as the system clock. This is useful when the\n"
"machine is hosting another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization\" option will automatically regulate\n"
"the clock by connecting to a remote time server on the internet. In the\n"
"list that is presented, choose a server located near you. Of course you\n"
"must have a working internet connection for this feature to function. It\n"
"will actually install on your machine a time server that can be optionally\n"
"used by other machines on your local network."
msgstr ""

#: ../../help.pm_.c:217
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, GNOME, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
"will proceed to the next step. If you cannot see the message, it simply\n"
"means that the configuration was wrong and the test will automatically end\n"
"after 10 seconds, restoring the screen."
msgstr ""

#: ../../help.pm_.c:237
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""

#: ../../help.pm_.c:249
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:256
msgid ""
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector "
"(MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard "
"disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""

#: ../../help.pm_.c:280
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this "
"procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""

#: ../../help.pm_.c:344
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:375
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""

#: ../../help.pm_.c:401
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""

#: ../../help.pm_.c:409
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Some bug-fixes may\n"
"have been fixed, and security issues solved. To allow you to benefit from\n"
"this updates you are now proposed to download them from the internet.\n"
"Choose \"Yes\" if you have a working internet connection, or \"No\" if you\n"
"prefer to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearer to you. Then a packages selection tree\n"
"appears: review the selection, and press \"Install\" to retrieve and\n"
"install the selected package or \"Cancel\" to abort."
msgstr ""

#: ../../help.pm_.c:422
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""
"F�r du g�r videre b�r du lese lisensen n�ye.\n"
"Den dekker hele Mandrake Linux distribusjonen og hvis du ikke er enig\n"
"med alt den sier, klikk p� \"Jeg nekter\" knappensom �yeblikkelig\n"
"avslutter installasjonen. For � fortsette installasjonen, klikk p�\n"
"\"Jeg aksepterer\" knappen."

#: ../../help.pm_.c:429
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"P� dette punktet er det tid for � velge sikkerhetsniv�et som passer for\n"
"maskinen. Som en tommelfingerregel, jo mere utsatt maskinen er, og jo mere\n"
"viktig data som er lagret der, jo h�yere b�r sikkerhetsniv�et v�re.\n"
"Men, et h�yere sikkerhetsniv� g�r gjerne p� beskostning av "
"brukvennligheten.\n"
"Se i MSEC kapittelet i ``Reference Manual'' for � f� mer informasjon om\n"
"disse niv�ene.\n"
"\n"
"Hvis du ikke vet hva du skal velge, behold standard valg."

#: ../../help.pm_.c:439
#, fuzzy
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"More\": gives access to additional features:\n"
"\n"
"    * \"Save partition table\": saves the partition table to a floppy. "
"Useful\n"
"for later partition-table recovery if necessary. It is strongly recommended\n"
"to perform this step.\n"
"\n"
"    * \"Restore partition table\": allows to restore a previously saved\n"
"partition table from floppy disk.\n"
"\n"
"    * \"Rescue partition table\": if your partition table is damaged, you "
"can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
"    * \"Reload partition table\": discards all changes and load your "
"initial\n"
"partitions table.\n"
"\n"
"    * \"removable media automounting\": unchecking this option will force "
"users\n"
"to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition "
"your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on "
"partitions\n"
"(Type, options, format) and gives more information.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the chapter ext2fs from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"P� dette punktet m� du velge hvilken\n"
"partisjon(er) som skal brukes til � installere ditt nye Mandrake Linux "
"system. Hvis partisjoner\n"
"allerede har blitt definert (fra en tidligere installasjon av GNU/Linux "
"eller fra\n"
"et annet partisjoneringsverkt�y), kan du bruke eksisterende partisjoner. I "
"andre tilfeller\n"
"m� harddiskpartisjoner defineres.\n"
"\n"
"\n"
"For � opprette partisjoner m� du f�rst velge en harddisk. Du kan velge disk\n"
"for partisjonering ved � klikke p� \"hda\" for den f�rste IDE disken, \"hdb"
"\" for\n"
"den andre eller \"sda\" for den f�rste SCSI disken osv.\n"
"\n"
"\n"
"For � partisjonere den valgte harddisken kan du bruke disse valgene:\n"
"\n"
"   * Fjern alle: dette valget sletter alle partisjoner tilgjengelig p� den "
"valgte harddisken.\n"
"\n"
"\n"
"   * Auto allokering:: dette valget lar deg automatisk opprette Ext2 og "
"veksel partisjoner p� den ledige plassen p�\n"
"     harddisken din.\n"
"\n"
"\n"
"   * Redd partisjonstabell: hvis partisjonstabellen din er skadet kan du "
"fors�ke � redde den ved � bruke dette valget. V�r\n"
"     forsiktig og husk at det kan g� galt.\n"
"\n"
"\n"
"   * Angre: du kan bruke dette valget til kanselere endringene dine.\n"
"\n"
"\n"
"   * Last igjen: du kan bruke dette valget hvis du angrer alle endringer og "
"vil laste partisjonstabellen du begynte med\n"
"\n"
"\n"
"   * Veiviser: Hvis du �nsker � bruke en hjelper til � partisjonere "
"harddisken din kan du bruke dette valget. Anbefales hvis\n"
"     du ikke har god kunnskap om partisjonering.\n"
"\n"
"\n"
"   * Gjenopprett fra diskett: hvis du har lagret partisjonstabellen din p� "
"en diskett under en tidligere installasjon kan du\n"
"     gjenopprette denne ved � bruke dette valget.\n"
"\n"
"\n"
"   * Lagre p� diskett: hvis du �nsker � lagre partisjonstabellen din p� en "
"diskett for � kunne gjenopprette denne kan du bruke dette\n"
"     valget. Det anbefales p� det sterkeste � bruke dette valget.\n"
"\n"
"\n"
"   * Ferdig: n�r du er ferdig med � partisjonere harddisken din bruk dette "
"valget til � lagre endringene dine.\n"
"\n"
"\n"
"For informasjon kan du n� valgene ved � bruke tastaturet: naviger gjennom "
"partisjonene ved � bruke Tab og Up/Down pilene.\n"
"\n"
"\n"
"N�r en partisjon er valgt kan du bruke:\n"
"\n"
"           * Ctrl-c til � opprette en ny partisjon (n�r en tom partisjon er "
"valgt)\n"
"\n"
"           * Ctrl-d til � slette en partisjon\n"
"\n"
"           * Ctrl-m til � sette monteringspunktet\n"
".............\n"
"\n"
".............\n"
"Hvis du installerer p� en PPV maskin, s� vil du nok lage en liten "
"HFS'bootstrap-partisjon' p� minst en megabyte for bruk\n"
"av yaboot oppstartslasteren. Hvis du �nsker  � lage partisjonen litt st�rre, "
"laoss si 50 MB, s� kan du kanskje lagre en ekstra kjene og ramdiskbilde for "
"n�dsituasjoner."

#: ../../help.pm_.c:510
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want to resize in order to install your\n"
"new Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Mer enn en Microsoft Windows partisjon har blitt\n"
"oppdaget p� harddisken din. Vennligst velg den du �nsker � endre st�rrelsen "
"p� for �\n"
"installere ditt nye Mandrake Linux operativsystem.\n"
"\n"
"\n"
"For informasjon, hver partisjon er listet som f�lger: \"Linux navn\", "
"\"Windows\n"
"navn\" \"Kapasitet\".\n"
"\n"
"\"Linux navn\" er kodet som f�lger: \"harddisk type\", \"harddisk nummer\",\n"
"\"partisjon nummer\" (f.eks., \"hda1\").\n"
"\n"
"\n"
"\"Harddisk type\" er \"hd\" hvis harddisken din er en IDE harddisk og \"sd"
"\"\n"
"hvis den er en SCSI harddisk.\n"
"\n"
"\n"
"\"Hard drive nummer\" er alltid en bokstav etter \"hd\" eller \"sd\". Med "
"IDE harddisker:\n"
"\n"
"   * \"a\" betyr \"master harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"b\" betyr \"slave harddisk p� prim�r IDE kontroller\",\n"
"\n"
"   * \"c\" betyr \"master harddisk p� sekund�r IDE kontroller\",\n"
"\n"
"   * \"d\" betyr \"slave harddisk p� sekund�r IDE kontroller\".\n"
"\n"
"Med SCSI harddisker, en \"a\" betyr \"prim�r harddisk\", en \"b\" betyr "
"\"sekund�r harddisk\", etc.\n"
"\n"
"\"Windows navn\" er bokstaven p� harddisken din under Windows (den f�rste "
"disken\n"
"eller partisjonen er kalt \"C:\")."

#: ../../help.pm_.c:541
msgid "Please be patient. This operation can take several minutes."
msgstr "V�r t�lmodig. Denne operasjonen kan ta flere minutter."

#: ../../help.pm_.c:544
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system:\n"
"\n"
" * \"Install\" Completely wipes out the old system. In fact, depending on\n"
"what currently holds your machine, you will be able to keep some old (Linux\n"
"or other) partitions unchanged.\n"
"\n"
" * \"Upgrade\" This installation class allows to simply update the packages\n"
"currently installed on your Mandrake Linux system. It keeps the current\n"
"partitions of your hard drives as well as users configuration. All other\n"
"configuration steps remain available with respect to plain installation.\n"
"\n"
" * \"Upgrade Packages Only\" This brand new class allows to upgrade an\n"
"existing Mandrake Linux system while keeping all system configuration\n"
"unchanged. Adding new packages to the current installation will be also\n"
"possible.\n"
"\n"
"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
"release.\n"
"\n"
"Depending on your knowledge of GNU/Linux, select one of the following\n"
"choices:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""

#: ../../help.pm_.c:580
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""

#: ../../help.pm_.c:593
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""

#: ../../help.pm_.c:606
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"[Return] to \"Cancel\" and choose again."
msgstr ""

#: ../../help.pm_.c:619
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Vennligst velg den riktige porten. F.eks., \"COM1\" porten under\n"
"Windows blir kalt \"ttyS0\" i GNU/Linux."

#: ../../help.pm_.c:623
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:659
msgid ""
"LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
"OS;\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu "
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"After you have configured the general boot-loader parameters, you are\n"
"presented the list of boot options that will be available at boot time.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Select an entry and click \"Modify\" to modify or remove\n"
"it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
"installation step."
msgstr ""

#: ../../help.pm_.c:707
msgid ""
"LILO (the LInux LOader) and grub are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (LInux LOader) og Grub er oppstartslastere: de kan starte opp enten\n"
"GNU/Linux eller et annet operativsystem som du har p� datamaskinen din.\n"
"Normalt blir de andre operativsystemene korrekt oppdaget og installert.\n"
"Hvis dette ikke er tilfelle, kan du legge til disse for h�nd i dette\n"
"bildet. V�r n�ye med � velge de korrekte parameterene.\n"
"\n"
"Hvis du ikke �nsker � gi tilgang til de andre operativsystemene til\n"
"andre kan du fjerne linjene for disse. Men i s� tilfelle trenger du\n"
"en oppstartsdiskett for � starte disse!"

#: ../../help.pm_.c:718
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"Du m� indikere hvor du �nsker �\n"
"plassere informasjonen som beh�ves for oppstart av GNU/Linux.\n"
"\n"
"Med mindre du vet akkurat hva du gj�r, velg \"F�rste sektor av\n"
"disken (MBR)\"."

#: ../../help.pm_.c:725
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
"a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""

#: ../../help.pm_.c:753
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware,\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting Information on Your\n"
"Hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""

#: ../../help.pm_.c:780
#, fuzzy
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot "
"prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr ""
"Du kan legge til flere valg for yaboot, enten for andre operativsystemer\n"
"andre kjerner, eller for ett n�dbootspeil.\n"
"\n"
"\n"
"For andre OS - skriv inn navn og rotpartisjon\n"
"\n"
"\n"
"Det er for Linux noen mulige valg:\n"
"\n"
"\n"
"  - Label: This is simply the name will type at the yaboot prompt to select "
"this \n"
"boot option.\n"
"\n"
"\n"
"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
"or\n"
"a variation of vmlinux with an extension.\n"
"\n"
"\n"
"  - Root: The root device or '/' for your Linux installation.\n"
"\n"
"\n"
"  \n"
"  - Append: On Apple hardware, the kernel append option is used quite often "
"to\n"
"assist in initializing video hardware, or to enable keyboard mouse button "
"emulation\n"
"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
"following \n"
"are some examples:\n"
"\n"
"\n"
"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
"\n"
"\n"
" \n"
"  - Initrd: This option can be used either to load initial modules, before "
"the boot \n"
"device is available, or to load a ramdisk image for an emergency boot "
"situation.\n"
"\n"
"\n"
"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
"should need\n"
"to allocate a large ramdisk, this option can be used.\n"
"\n"
"\n"
"  - Read-write: Normally the 'root' partition is initially brought up read-"
"only, to allow\n"
"a filesystem check before the system becomes 'live'.  You can override this "
"option here.\n"
"\n"
"\n"
"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
"problematic, you can\n"
"select this option to boot in 'novideo' mode, with native framebuffer "
"support.\n"
"\n"
"\n"
"  - Default: Selects this entry as being the default Linux selection, "
"selectable by just\n"
"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
"with a '*', if you\n"
"press TAB to see the boot selections."

#: ../../help.pm_.c:825
#, fuzzy
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required "
"to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot er en oppstartslaster for NewWorld MacIntosh hardware. Den kan\n"
"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p� din\n"
"datamaskin. Vanligvis vil disse andre operativsystemer bli korrekt oppdaget "
"og\n"
"installert. Hvis dette ikke skulle v�re tilfelle kan du legge til endringer "
"her.\n"
"V�r forsiktig n�r du velger de korrekte parametre.\n"
"\n"
"\n"
"Yaboots hovdvalg er:\n"
"\n"
"\n"
"  - Init beskjed: En enkel melding som vises f�r \n"
"oppstartsprosessen starter.\n"
"\n"
"\n"
"  - Oppstartsenhet: Indiker hvor du �nsker � plassere informasjonen\n"
"som trengs for � starte GNU/Linux. Du vil generelt ha satt opp en\n"
"bootstrap-partisjon for � ha denne informasjonen.\n"
"\n"
"\n"
"  - �pne firmwareforsinkelse: Ulikt LILO s� er det to forsinkelser\n"
"som er tilgjengelig med yaboot. Den f�rste forsinkelsen blir m�lt i\n"
"sekunder og du kan ved det punktet velge mellom CD, OF-boot, \n"
"MacOS eller Linux.\n"
"\n"
"  - KjernebBoot Timeout: Denne er lik LILI oppstartsforsinkelse.\n"
"Etter � ha valgt Linux, vil du ha 0,1 sekunder f�r standard kjerne \n"
"blir valgt.\n"
"\n"
"\n"
"  - Aktiver CD Boot?: Hvis du velger dette valget vil \n"
"du kunne trykke 'C' for CD ved det f�rste oppstartsvalget.\n"
"\n"
"\n"
"  - Aktiver OF Boot?: Hvis du velger dette valget vil du kunne\n"
"trykke 'N' for Open Formware ved det f�rste oppstartsvalget.\n"
"\n"
"\n"
"  - Standard OS: Du kan velge hvilket OS som skal lastes n�r\n"
"Open Firmwareforsinkelsen er utl�pt."

#: ../../help.pm_.c:858
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary.\n"
"\n"
" * \"Timezone\": DrakX, by default, guesses your time zone from the "
"language\n"
"you have chosen. But here again, as for the choice of a keyboard, you may\n"
"not be in the country for which the chosen language should correspond.\n"
"Hence, you may need to click on the \"Timezone\" button in order to\n"
"configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:887
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"Velg den harddisken du �nsker � slette for � installere din nye Mandrake\n"
"Linux partisjon. V�r forsiktig, alle data p� denne vil g� tapt og vil ikke\n"
"kunne gjenopprettes!"

#: ../../help.pm_.c:892
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Klikk p� \"OK\" hvis du �nsker � slette alle data og partisjoner p� denne\n"
"harddisken. V�r forsiktig, etter at du har klikket p� \"OK\" vil du ikke\n"
"kunne gjenopprette data og partisjoner p� denne harddisken inkludert "
"Windows\n"
"data.\n"
"\n"
"Klikk p� \"Avbryt\" for � avbryte denne operasjonen uten � miste data og\n"
"partisjoner p� denne harddisken."

#: ../../install2.pm_.c:114
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: ../../install2.pm_.c:170
#, c-format
msgid "You must also format %s"
msgstr "Du m� ogs� formatere %s"

#: ../../install_any.pm_.c:406
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"D har valgt f�lgende tjener(e): %s\n"
"\n"
"\n"
"Disse tjenerene er aktivert som standard. De har ingen kjente sikkerhets-\n"
"problemer, men noen nye kan bli funnet. I s� tilfelle m� du oppgradere\n"
"s� snart som mulig.\n"
"\n"
"\n"
"�nsker du virkelig � installere disse tjenerene?\n"

#: ../../install_any.pm_.c:442
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan ikke bruke broadcast med intet NIS domene"

#: ../../install_any.pm_.c:785
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Sett inn en FAT-formatert diskett i stasjon %s"

#: ../../install_any.pm_.c:789
msgid "This floppy is not FAT formatted"
msgstr "Denne disketten er ikke FAT-formatert"

#: ../../install_any.pm_.c:801
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"For � bruke dette valget av pakker, start installasjonen med'linux "
"defcfg=floppy'"

#: ../../install_any.pm_.c:823 ../../partition_table.pm_.c:763
#, c-format
msgid "Error reading file %s"
msgstr "Feil ved lesing av fil %s"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Noe maskinvare i maskinen din trenger ``riktige'' drivere for � virke.\n"
"Du kan finne noe informasjon om disse her: %s"

#: ../../install_interactive.pm_.c:58
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Du m� ha en root-partisjon.\n"
"Opprett en partisjon for dette (eller klikk p� en eksisterende).\n"
"Velg s� ``Monteringspunkt'' og  sett dette til `/'"

#: ../../install_interactive.pm_.c:63
msgid "You must have a swap partition"
msgstr "Du m� ha en vekslingspartisjon"

#: ../../install_interactive.pm_.c:64
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Du har ingen vekselpartisjon\n"
"\n"
"Fortsette likevel?"

#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:160
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Du m� ha en FAT-parisjonen montert under /boot/efi"

#: ../../install_interactive.pm_.c:90
msgid "Use free space"
msgstr "Bruk ledig plass"

#: ../../install_interactive.pm_.c:92
msgid "Not enough free space to allocate new partitions"
msgstr "Ikke nok plass til � allokere en ny partisjon"

#: ../../install_interactive.pm_.c:100
msgid "Use existing partition"
msgstr "Bruk eksisterende partisjon"

#: ../../install_interactive.pm_.c:102
msgid "There is no existing partition to use"
msgstr "Det finnes ingen eksisterende partisjon som kan brukes"

#: ../../install_interactive.pm_.c:109
msgid "Use the Windows partition for loopback"
msgstr "Bruk Windows partisjonen for loopback"

#: ../../install_interactive.pm_.c:112
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Hvilken partisjon vil du bruke for Linux4Win?"

#: ../../install_interactive.pm_.c:114
msgid "Choose the sizes"
msgstr "Velg st�rrelsene"

#: ../../install_interactive.pm_.c:115
msgid "Root partition size in MB: "
msgstr "Root-partisjonsst�rrelse i MB: "

#: ../../install_interactive.pm_.c:116
msgid "Swap partition size in MB: "
msgstr "Veksel-partisjonsst�rrelse i MB: "

#: ../../install_interactive.pm_.c:125
msgid "Use the free space on the Windows partition"
msgstr "Bruk den ledige plassen p� Windows partisjonen"

#: ../../install_interactive.pm_.c:128
msgid "Which partition do you want to resize?"
msgstr "Hvilken partisjonstype �nsker du � forandre st�rrelse p�?"

#: ../../install_interactive.pm_.c:130
msgid "Computing Windows filesystem bounds"
msgstr "Beregner Windows filsystemgrense"

#: ../../install_interactive.pm_.c:133
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"St�rrelsesendreren for FAT greide ikke � h�ndtere din partisjon, \n"
"f�lgende feil oppsto: %s"

#: ../../install_interactive.pm_.c:136
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr ""
"Windows-partisjonen din er for fragmentert, vennligst kj�r ``defrag'' f�rst"

#: ../../install_interactive.pm_.c:137
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ADVARSEL!\n"
"\n"
"DrakX vil n� endre st�rrelsen p� Windows partisjonen din. V�r\n"
"forsiktig: denne operasjonen er farlig. Hvis du ikke allerede har\n"
"gjort det burde du f�rst kj�re scandisk under Windows (og som en\n"
"opsjon kj�re defrag) p� denne partisjonen og ta sikkerhetskopi av dine "
"data.\n"
"N�r du er sikker, trykk Ok."

#: ../../install_interactive.pm_.c:147
msgid "Which size do you want to keep for windows on"
msgstr "Hvilken st�rrelse �nsker du � beholde vinduer p�?"

#: ../../install_interactive.pm_.c:148
#, c-format
msgid "partition %s"
msgstr "partisjon %s"

#: ../../install_interactive.pm_.c:155
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Krymping/forst�rring av FAT feilet: %s"

#: ../../install_interactive.pm_.c:170
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Det finnes ingen FAT partisjon � forandre st�rrelsen p� eller � bruke som "
"loopback (ikke nok plass igjen)"

#: ../../install_interactive.pm_.c:176
msgid "Erase entire disk"
msgstr "Slette hele disken"

#: ../../install_interactive.pm_.c:176
msgid "Remove Windows(TM)"
msgstr "Fjern Windows(TM)"

#: ../../install_interactive.pm_.c:179
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Du har mer enn en harddisk, hvilken �nsker du � installere linux p�?"

#: ../../install_interactive.pm_.c:182
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ALLE eksisterende partisjoner og deres data vil v�re tapt p� disk %s"

#: ../../install_interactive.pm_.c:190
msgid "Custom disk partitioning"
msgstr "Egendefinert diskpartisjonering"

#: ../../install_interactive.pm_.c:194
msgid "Use fdisk"
msgstr "Bruk fdisk"

#: ../../install_interactive.pm_.c:197
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Du kan n� partisjonere %s.\n"
"N�r du er ferdig ikke glem � lagre med `w'"

#: ../../install_interactive.pm_.c:226
msgid "You don't have enough free space on your Windows partition"
msgstr "Du har ikke nok ledig plass p� Windows partisjonen din"

#: ../../install_interactive.pm_.c:242
msgid "I can't find any room for installing"
msgstr "Jeg kan ikke finne noe rom for installering"

#: ../../install_interactive.pm_.c:246
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX partisjonsveiviseren fant f�lgende l�sninger:"

#: ../../install_interactive.pm_.c:251
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partisjonering feilet: %s"

#: ../../install_interactive.pm_.c:261
msgid "Bringing up the network"
msgstr "Henter opp nettverket"

#: ../../install_interactive.pm_.c:266
msgid "Bringing down the network"
msgstr "Tar ned nettverket"

#: ../../install_steps.pm_.c:73
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"En feil oppsto, men jeg vet ikke hvordan jeg skal h�ndtere dette p� en\n"
"pen m�te.\n"
"Fortsett p� eget ansvar."

#: ../../install_steps.pm_.c:202
#, c-format
msgid "Duplicate mount point %s"
msgstr "Dupliser monteringspunkt %s"

#: ../../install_steps.pm_.c:382
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Noen viktige pakker ble ikke installert ordentlig.\n"
"Det er noe galt enten med CD-rom'en eller CD-platen.\n"
"Sjekk cd-platen p� en installert maskin med \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"

#: ../../install_steps.pm_.c:452
#, c-format
msgid "Welcome to %s"
msgstr "Velkommen til %s"

#: ../../install_steps.pm_.c:500 ../../install_steps.pm_.c:742
msgid "No floppy drive available"
msgstr "Ingen diskettstasjon tilgjengelig"

#: ../../install_steps_auto_install.pm_.c:77
#: ../../install_steps_stdio.pm_.c:22
#, c-format
msgid "Entering step `%s'\n"
msgstr "Entrer trinn `%s'\n"

#: ../../install_steps_gtk.pm_.c:148
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Systemet ditt har lite ressurser. Du kan muligens oppleve noen problemer\n"
"ved installering av Mandrake Linux. Hvis dette skjer kan du pr�ve tekst- "
"installering\n"
"i stedet. Trykk `F1' ved oppstart av CD-ROM, skriv s� `text'."

#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
msgid "Install Class"
msgstr "Installeringsklasse"

#: ../../install_steps_gtk.pm_.c:162
msgid "Please choose one of the following classes of installation:"
msgstr "Vennligst velg en av f�lgende installasjonsklasser:"

#: ../../install_steps_gtk.pm_.c:228
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "Den totale st�rrelsen for gruppene du har valgt er omtrent %d MB.\n"

#: ../../install_steps_gtk.pm_.c:230
#, c-format
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"Hvis du �nsker � installere mindre enn denne st�rrelsen,\n"
"velg den prosentdelen av pakkene som du �nsker � installere.\n"
"\n"
"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
"en prosentdel p� 100%% vil installere alle valgte pakker."

#: ../../install_steps_gtk.pm_.c:235
#, c-format
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"Du har plass p� disken din for bare %d%% av disse pakkene.\n"
"\n"
"Hvis du �nsker � installere mindre enn dette,\n"
"velg den prosentdelen av pakkene som du �nsker � installere.\n"
"En lav prosentdel vil installere bare de mest viktige pakkene;\n"
"en prosentdel p� %d%% vil installere s� mange pakker som mulig."

#: ../../install_steps_gtk.pm_.c:241
msgid "You will be able to choose them more specifically in the next step."
msgstr "Du vil kunne velge disse mere spesifisert i neste trinn."

#: ../../install_steps_gtk.pm_.c:243
msgid "Percentage of packages to install"
msgstr "Prosentdel av pakker � installere"

#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:707
msgid "Package Group Selection"
msgstr "Valg pakkegruppe"

#: ../../install_steps_gtk.pm_.c:322 ../../install_steps_interactive.pm_.c:722
msgid "Individual package selection"
msgstr "Individuelt pakkevalg"

#: ../../install_steps_gtk.pm_.c:345 ../../install_steps_interactive.pm_.c:647
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Total st�rrelse: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:390
msgid "Bad package"
msgstr "D�rlig pakke"

#: ../../install_steps_gtk.pm_.c:391
#, c-format
msgid "Name: %s\n"
msgstr "Navn: %s\n"

#: ../../install_steps_gtk.pm_.c:392
#, c-format
msgid "Version: %s\n"
msgstr "Versjon: %s\n"

#: ../../install_steps_gtk.pm_.c:393
#, c-format
msgid "Size: %d KB\n"
msgstr "St�rrelse: %d KB\n"

#: ../../install_steps_gtk.pm_.c:394
#, c-format
msgid "Importance: %s\n"
msgstr "Viktighet: %s\n"

#: ../../install_steps_gtk.pm_.c:416
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Du kan ikke velge denne pakken da det ikke er igjen nok plass til � "
"installere denne"

#: ../../install_steps_gtk.pm_.c:421
msgid "The following packages are going to be installed"
msgstr "F�lgende pakker vil bli installert"

#: ../../install_steps_gtk.pm_.c:422
msgid "The following packages are going to be removed"
msgstr "F�lgende pakker vil bli fjernet"

#: ../../install_steps_gtk.pm_.c:434
msgid "You can't select/unselect this package"
msgstr "Du kan ikke velge/fjerne denne pakken"

#: ../../install_steps_gtk.pm_.c:446
msgid "This is a mandatory package, it can't be unselected"
msgstr "Dette er en bestemt pakke, den kan ikke fjernes"

#: ../../install_steps_gtk.pm_.c:448
msgid "You can't unselect this package. It is already installed"
msgstr "Du kan ikke fjerne denne pakken, den er allerede installert"

#: ../../install_steps_gtk.pm_.c:452
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"Denne pakken m� oppgraderes\n"
"Er du sikker p� at du ikke vil velge denne?"

#: ../../install_steps_gtk.pm_.c:456
msgid "You can't unselect this package. It must be upgraded"
msgstr "Du kan ikke fjerne denne pakken. Den m� oppgraderes"

#: ../../install_steps_gtk.pm_.c:461
msgid "Show automatically selected packages"
msgstr "Vis automatisk valgte pakker"

#: ../../install_steps_gtk.pm_.c:462 ../../install_steps_interactive.pm_.c:246
#: ../../install_steps_interactive.pm_.c:250
msgid "Install"
msgstr "Installer"

#: ../../install_steps_gtk.pm_.c:465
msgid "Load/Save on floppy"
msgstr "Lagre p�/hente fra diskett"

#: ../../install_steps_gtk.pm_.c:466
msgid "Updating package selection"
msgstr "Oppdaterer pakkevalg"

#: ../../install_steps_gtk.pm_.c:471
msgid "Minimal install"
msgstr "Minimal installasjon"

#: ../../install_steps_gtk.pm_.c:486 ../../install_steps_interactive.pm_.c:555
msgid "Choose the packages you want to install"
msgstr "Velg pakkene du �nsker � installere"

#: ../../install_steps_gtk.pm_.c:502 ../../install_steps_interactive.pm_.c:789
msgid "Installing"
msgstr "Installerer"

#: ../../install_steps_gtk.pm_.c:508
msgid "Estimating"
msgstr "Beregner"

#: ../../install_steps_gtk.pm_.c:515
msgid "Time remaining "
msgstr "Tid som gjenst�r "

#: ../../install_steps_gtk.pm_.c:527
msgid "Please wait, preparing installation"
msgstr "Vennligst vent, forbereder installasjon"

#: ../../install_steps_gtk.pm_.c:610
#, c-format
msgid "%d packages"
msgstr "%d pakker"

#: ../../install_steps_gtk.pm_.c:615
#, c-format
msgid "Installing package %s"
msgstr "Installerer pakke %s"

#: ../../install_steps_gtk.pm_.c:656 ../../install_steps_interactive.pm_.c:185
#: ../../install_steps_interactive.pm_.c:813
#: ../../standalone/drakautoinst_.c:203
msgid "Accept"
msgstr "Godta"

#: ../../install_steps_gtk.pm_.c:656 ../../install_steps_interactive.pm_.c:185
#: ../../install_steps_interactive.pm_.c:813
msgid "Refuse"
msgstr "Nekte"

#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:814
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Bytt CD!\n"
"\n"
"Vennligst sett inn CD'en merket \"%s\" i stasjonen og trykk Ok n�r du er "
"ferdig.\n"
"Hvis du ikke har den trykk Avbryt for � unng� installasjon fra denne CD'en."

#: ../../install_steps_gtk.pm_.c:671 ../../install_steps_gtk.pm_.c:675
#: ../../install_steps_interactive.pm_.c:826
#: ../../install_steps_interactive.pm_.c:830
msgid "Go on anyway?"
msgstr "Fortsette uansett?"

#: ../../install_steps_gtk.pm_.c:671 ../../install_steps_interactive.pm_.c:826
msgid "There was an error ordering packages:"
msgstr "Det var en feil ved endring av pakkenes rekkef�lge:"

#: ../../install_steps_gtk.pm_.c:675 ../../install_steps_interactive.pm_.c:830
msgid "There was an error installing packages:"
msgstr "Det var en feil ved installering av pakkene:"

#: ../../install_steps_interactive.pm_.c:10
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"

#: ../../install_steps_interactive.pm_.c:67
msgid "An error occurred"
msgstr "En feil oppsto"

#: ../../install_steps_interactive.pm_.c:85
msgid "Do you really want to leave the installation?"
msgstr "�nsker du virkelig � forlate installasjonen?"

#: ../../install_steps_interactive.pm_.c:108
msgid "License agreement"
msgstr "License agreement"

#: ../../install_steps_interactive.pm_.c:109
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:205
#: ../../install_steps_interactive.pm_.c:1047
#: ../../standalone/keyboarddrake_.c:28
msgid "Keyboard"
msgstr "Tastatur"

#: ../../install_steps_interactive.pm_.c:206
msgid "Please choose your keyboard layout."
msgstr "Vennligst velg tastatur-oppsettet ditt."

#: ../../install_steps_interactive.pm_.c:207
msgid "Here is the full list of keyboards available"
msgstr "Her er den komplette lista over tilgjengelige tastatur"

#: ../../install_steps_interactive.pm_.c:224
msgid "Which installation class do you want?"
msgstr "Hvilken installasjonsklasse �nsker du?"

#: ../../install_steps_interactive.pm_.c:226
msgid "Install/Update"
msgstr "Installer/Oppdater"

#: ../../install_steps_interactive.pm_.c:226
msgid "Is this an install or an update?"
msgstr "Er dette en installering eller en oppdatering?"

#: ../../install_steps_interactive.pm_.c:235
msgid "Recommended"
msgstr "Anbefalt"

#: ../../install_steps_interactive.pm_.c:238
#: ../../install_steps_interactive.pm_.c:241
msgid "Expert"
msgstr "Ekspert"

#: ../../install_steps_interactive.pm_.c:246
#: ../../install_steps_interactive.pm_.c:250
msgid "Upgrade"
msgstr "Oppgrader"

#: ../../install_steps_interactive.pm_.c:246
#: ../../install_steps_interactive.pm_.c:250
msgid "Upgrade packages only"
msgstr "Oppgrader kun pakker"

#: ../../install_steps_interactive.pm_.c:266
msgid "Please choose the type of your mouse."
msgstr "Vennligst velg din musetype."

#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
msgid "Mouse Port"
msgstr "Port mus"

#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Vennligst velg hvilken serieport musen din koblet til."

#: ../../install_steps_interactive.pm_.c:281
msgid "Buttons emulation"
msgstr "Emulering knapper"

#: ../../install_steps_interactive.pm_.c:283
msgid "Button 2 Emulation"
msgstr "Emulering 2 knapper"

#: ../../install_steps_interactive.pm_.c:284
msgid "Button 3 Emulation"
msgstr "Emulering 3 knapper"

#: ../../install_steps_interactive.pm_.c:305
msgid "Configuring PCMCIA cards..."
msgstr "Konfigurerer PCMCIA kort..."

#: ../../install_steps_interactive.pm_.c:305
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:312
msgid "Configuring IDE"
msgstr "Konfigurerer IDE"

#: ../../install_steps_interactive.pm_.c:312
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:327
msgid "no available partitions"
msgstr "ingen tilgjengelige partisjoner"

#: ../../install_steps_interactive.pm_.c:330
msgid "Scanning partitions to find mount points"
msgstr "Skanner partisjoner for � finne monteringspunkter"

#: ../../install_steps_interactive.pm_.c:338
msgid "Choose the mount points"
msgstr "Velg monteringspunktene"

#: ../../install_steps_interactive.pm_.c:357
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Jeg kan ikke lese partisjonstabellen din, den er for �delagt for meg :(\n"
"Jeg kan fors�ke � blanke ut d�rlige partisjoner (ALLE DATA vil g� tapt!)\n"
"Den andre l�sningen er � ikke la DrakX modifisere partisjonstabellen.\n"
"(feilen er %s)\n"
"\n"
"Vil du miste alle partisjonene?\n"

#: ../../install_steps_interactive.pm_.c:370
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake klarte ikke � lese partisjonstabellen korrekt.\n"
"Fortsett p� eget ansvar!"

#: ../../install_steps_interactive.pm_.c:386
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Det er ikke plass for 1 MB bootstrap! Installasjonen vil fortsette, but for "
"�boote systemet ditt, m� du lage en bootstrap partisjon i DiskDrake"

#: ../../install_steps_interactive.pm_.c:395
msgid "No root partition found to perform an upgrade"
msgstr "Ingen rotpartisjon funnet for oppgradering"

#: ../../install_steps_interactive.pm_.c:396
msgid "Root Partition"
msgstr "Rotpartisjon"

#: ../../install_steps_interactive.pm_.c:397
msgid "What is the root partition (/) of your system?"
msgstr "Hva er rotpartisjonen (/) p� ditt system?"

#: ../../install_steps_interactive.pm_.c:411
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Du m� starte maskinen p� nytt for at modifiseringene skal tre i kraft"

#: ../../install_steps_interactive.pm_.c:435
msgid "Choose the partitions you want to format"
msgstr "Velg partisjonene du �nsker � partisjonere"

#: ../../install_steps_interactive.pm_.c:436
msgid "Check bad blocks?"
msgstr "Sjekke fo rd�rlige clustere?"

#: ../../install_steps_interactive.pm_.c:462
msgid "Formatting partitions"
msgstr "Formaterer partisjoner"

#: ../../install_steps_interactive.pm_.c:464
#, c-format
msgid "Creating and formatting file %s"
msgstr "Lager of formaterer fila %s"

#: ../../install_steps_interactive.pm_.c:467
msgid "Not enough swap to fulfill installation, please add some"
msgstr ""
"Det er ikke nok SWAP til � fullf�re installasjonen, vennligst legg til litt "
"mer"

#: ../../install_steps_interactive.pm_.c:473
msgid "Looking for available packages"
msgstr "S�ker etter tilgjengelige pakker"

#: ../../install_steps_interactive.pm_.c:479
msgid "Finding packages to upgrade"
msgstr "Finner pakker som skal oppgraderes"

#: ../../install_steps_interactive.pm_.c:496
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr ""
"Ditt system har ikke nok plass igjen for installasjon eller oppgradering (%d "
"> %d)"

#: ../../install_steps_interactive.pm_.c:515
#, c-format
msgid "Complete (%dMB)"
msgstr "Full (%dMB)"

#: ../../install_steps_interactive.pm_.c:515
#, c-format
msgid "Minimum (%dMB)"
msgstr "Minimum (%dMB)"

#: ../../install_steps_interactive.pm_.c:515
#, c-format
msgid "Recommended (%dMB)"
msgstr "Anbefalt (%dMB)"

#: ../../install_steps_interactive.pm_.c:570
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Vennligst velg lagre eller hente pakkevalg p� diskett.\n"
"Formatet er det samme som for auto_install genererte disketter."

#: ../../install_steps_interactive.pm_.c:573
msgid "Load from floppy"
msgstr "Hent fra diskett"

#: ../../install_steps_interactive.pm_.c:575
msgid "Loading from floppy"
msgstr "Henter fra disketten"

#: ../../install_steps_interactive.pm_.c:575
msgid "Package selection"
msgstr "Pakkevalg"

#: ../../install_steps_interactive.pm_.c:580
msgid "Insert a floppy containing package selection"
msgstr "Sett inn en diskett med pakkevalget"

#: ../../install_steps_interactive.pm_.c:592
msgid "Save on floppy"
msgstr "Lagre p� diskett"

#: ../../install_steps_interactive.pm_.c:660
msgid "Selected size is larger than available space"
msgstr "Valgt st�rrelse er st�rre enn tilgjengelig plass"

#: ../../install_steps_interactive.pm_.c:673
msgid "Type of install"
msgstr ""

#: ../../install_steps_interactive.pm_.c:674
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: ../../install_steps_interactive.pm_.c:677
msgid "With X"
msgstr ""

#: ../../install_steps_interactive.pm_.c:679
msgid "With basic documentation (recommended!)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:680
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:764
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Hvis du har alle CDene i listen nedenfor, klikk Ok.\n"
"Hvis du ikke har noen av disse CDene, klikk Avbryt.\n"
"Hvis bare noen av CDene mangler, fjern disse, klikk s� Ok."

#: ../../install_steps_interactive.pm_.c:769
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "CD-ROMen ved navnet \"%s\""

#: ../../install_steps_interactive.pm_.c:789
msgid "Preparing installation"
msgstr "Forbereder installasjon"

#: ../../install_steps_interactive.pm_.c:798
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Installerer pakke %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:844
msgid "Post-install configuration"
msgstr "Konfigurasjon postinstallering"

#: ../../install_steps_interactive.pm_.c:850
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Sett inn en oppstartsdiskett i stasjon %s"

#: ../../install_steps_interactive.pm_.c:856
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Sett inn oppdater moduler disketten i stasjon %s"

#: ../../install_steps_interactive.pm_.c:876
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Du har n� mulighet til � laste ned programvare for kryptering.\n"
"\n"
"ADVARSEL:\n"
"\n"
"Pga. forskjellige krav som er tillagt denne programvaren og p�lagt av "
"forskjellige\n"
"myndigheter, b�r kunde og/eller sluttbruker av denne programvaren forsikre "
"seg\n"
"om at lovene i sin/deres jurisdiksjon tillater han/dem � laste ned, ha i "
"besittelse\n"
"og/eller bruke denne programvaren.\n"
"\n"
"I tillegg skal kunde og/eller sluttbruker spesielt v�re oppmerksom p� � ikke "
"bryte\n"
"lovene i sin/deres jurisdiksjon. Skulle kunde og/eller sluttbruker ikke\n"
"respektere bestemmelsene av disse lovene, vil han/de p�dra seg alvorlige\n"
"sanksjoner.\n"
"\n"
"Under ingen omstendighet skal Mandrakesoft og eller ikke sine produsenter og/"
"eller\n"
"leverand�rer bli holdt ansvarlige for s�rskilte, indirekte eller tilfeldige\n"
"skader uansett hva som enn skulle (inkludert, men ikke begrenset til tap av "
"fortjeneste,\n"
"forretningsavbrudd, tap av kommersiell data og andre pengemessige tap, og "
"endelige\n"
"ansvarsforhold og erstatninger som skal betales if�lge en rettslig\n"
"avgj�relse) oppst� ut av bruk, besittelse, eller ene og alene nedlastingen\n"
"av denne programvaren, som kunde og/eller sluttbruker til slutt kan ha\n"
"tilgang til etter � ha sagt seg enig i og undertegnet fremviste avtale.\n"
"\n"
"For sp�rsm�l ang�ende denne avtalen, vennligst kontakt \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:914
msgid ""
"You have now the possibility to download updated packages that have\n"
"been released after the distribution has been made available.\n"
"\n"
"You will get security fixes or bug fixes, but you need to have an\n"
"Internet connection configured to proceed.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:928
msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
msgstr ""
"Kontakter Mandrake Linux web-sted for � f� en liste over tilgjengelige speil"

#: ../../install_steps_interactive.pm_.c:933
msgid "Choose a mirror from which to get the packages"
msgstr "Velg et speil som pakkene kan hentes fra"

#: ../../install_steps_interactive.pm_.c:942
msgid "Contacting the mirror to get the list of available packages"
msgstr "Kontakter speilet for � f� en liste over tilgjengelige pakker"

#: ../../install_steps_interactive.pm_.c:969
msgid "Which is your timezone?"
msgstr "Hva er din tidsone?"

#: ../../install_steps_interactive.pm_.c:974
msgid "Hardware clock set to GMT"
msgstr "Maskinvareklokken din satt til GMT"

#: ../../install_steps_interactive.pm_.c:975
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatisk tidssynkronisering (ved hjelp av NTP)"

#: ../../install_steps_interactive.pm_.c:982
msgid "NTP Server"
msgstr "NTP-tjener"

#: ../../install_steps_interactive.pm_.c:1016
#: ../../install_steps_interactive.pm_.c:1024
msgid "Remote CUPS server"
msgstr "Fjern-CUPS tjener"

#: ../../install_steps_interactive.pm_.c:1017
msgid "No printer"
msgstr "Ingen skriver"

#: ../../install_steps_interactive.pm_.c:1034
msgid "Do you have an ISA sound card?"
msgstr "Har du et ISA lydkort?"

#: ../../install_steps_interactive.pm_.c:1036
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
"Kj�r \"sndconfig\" etter installasjonen for � konfigurere lydkortet ditt"

#: ../../install_steps_interactive.pm_.c:1038
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "Lydkort ikke oppdaget. Pr�v \"harddrake\" etter installasjonen"

#: ../../install_steps_interactive.pm_.c:1043 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Oppsummering"

#: ../../install_steps_interactive.pm_.c:1046
msgid "Mouse"
msgstr "Mus"

#: ../../install_steps_interactive.pm_.c:1048
msgid "Timezone"
msgstr "Tidssone"

#: ../../install_steps_interactive.pm_.c:1049 ../../printerdrake.pm_.c:2233
#: ../../printerdrake.pm_.c:2311
msgid "Printer"
msgstr "Skriver"

#: ../../install_steps_interactive.pm_.c:1051
msgid "ISDN card"
msgstr "ISDN-kort"

#: ../../install_steps_interactive.pm_.c:1054
#: ../../install_steps_interactive.pm_.c:1056
msgid "Sound card"
msgstr "Lydkort"

#: ../../install_steps_interactive.pm_.c:1058
msgid "TV card"
msgstr "TV-kort"

#: ../../install_steps_interactive.pm_.c:1096
#: ../../install_steps_interactive.pm_.c:1120
#: ../../install_steps_interactive.pm_.c:1124
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm_.c:1097
#: ../../install_steps_interactive.pm_.c:1120
#: ../../install_steps_interactive.pm_.c:1133
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:1098
#: ../../install_steps_interactive.pm_.c:1120
msgid "Local files"
msgstr "Lokale filer"

#: ../../install_steps_interactive.pm_.c:1107
#: ../../install_steps_interactive.pm_.c:1108 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Sett root-passord"

#: ../../install_steps_interactive.pm_.c:1109
msgid "No password"
msgstr "Intet passord"

#: ../../install_steps_interactive.pm_.c:1114
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "Dette passordet er for enkelt (m� v�re minst %d tegn langt)"

#: ../../install_steps_interactive.pm_.c:1120 ../../network/modem.pm_.c:49
#: ../../standalone/draknet_.c:625 ../../standalone/logdrake_.c:172
msgid "Authentication"
msgstr "Autentifikasjon"

#: ../../install_steps_interactive.pm_.c:1128
msgid "Authentication LDAP"
msgstr "Autentisering LDAP"

#: ../../install_steps_interactive.pm_.c:1129
msgid "LDAP Base dn"
msgstr "LDAP grunnleggende dn"

#: ../../install_steps_interactive.pm_.c:1130
msgid "LDAP Server"
msgstr "LDAP-tjener"

#: ../../install_steps_interactive.pm_.c:1136
msgid "Authentication NIS"
msgstr "Autentisering NIS"

#: ../../install_steps_interactive.pm_.c:1137
msgid "NIS Domain"
msgstr "NIS-domene"

#: ../../install_steps_interactive.pm_.c:1138
msgid "NIS Server"
msgstr "NIS-tjener"

#: ../../install_steps_interactive.pm_.c:1173
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
"ikke �nsker\n"
"� installere SILO p� systemet ditt, eller et annet operativsystem fjerner "
"SILO,\n"
"eller at SILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
"oppstartsdiskett\n"
"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
"lettere gjenopprette\n"
"etter systemsvikt.\n"
"Hvis du �nsker du � opprette en oppstartsdiskett for systemet ditt, sett inn "
"en diskett\n"
"i den f�rste stasjonen og trykk \"Ok\"."

#: ../../install_steps_interactive.pm_.c:1189
msgid "First floppy drive"
msgstr "F�rste diskettstasjon"

#: ../../install_steps_interactive.pm_.c:1190
msgid "Second floppy drive"
msgstr "Andre diskettstasjon"

#: ../../install_steps_interactive.pm_.c:1191 ../../printerdrake.pm_.c:1821
msgid "Skip"
msgstr "Dropp"

#: ../../install_steps_interactive.pm_.c:1196
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"En egendefinert oppstartsdiskett er en m�te � starte Linux-systemet p� uten\n"
"� v�re avhengig av den vanlige oppstartslasteren. Dette er nyttig hvis du "
"ikke �nsker\n"
"� installere LILO (eller grub) p� systemet ditt, eller et annet "
"operativsystem fjerner LILO,\n"
"eller at LILO ikke virker med din maskinvarekonfigurasjon. En egendefinert "
"oppstartsdiskett\n"
"kan ogs� brukes sammen med Mandrake's redningsbilde, som gj�r det mye "
"lettere gjenopprette\n"
"etter systemsvikt. �nsker du � opprette en oppstartsdiskett for systemet "
"ditt?\n"
"%s"

#: ../../install_steps_interactive.pm_.c:1202
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1210
msgid "Sorry, no floppy drive available"
msgstr "Beklager, ingen diskettstasjon tilgjengelig"

#: ../../install_steps_interactive.pm_.c:1214
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Velg diskettstasjonen du �nsker � bruke for � lage oppstartsdisketten"

#: ../../install_steps_interactive.pm_.c:1218
#, c-format
msgid "Insert a floppy in %s"
msgstr "Sett inn en diskett i %s"

#: ../../install_steps_interactive.pm_.c:1221
msgid "Creating bootdisk"
msgstr "Oppretter oppstartdiskett"

#: ../../install_steps_interactive.pm_.c:1228
msgid "Preparing bootloader"
msgstr "Klargj�r oppstartslaster"

#: ../../install_steps_interactive.pm_.c:1239
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""
"Det virker som du har en OldWorld eller ukjent\n"
"maskin, yaboot oppstartslasteren vil ikke virke for deg.\n"
"Installasjonen vil fortsette, men du m�\n"
"bruke BootX for � starte din maskin."

#: ../../install_steps_interactive.pm_.c:1245
msgid "Do you want to use aboot?"
msgstr "�nsker du � bruke aboot?"

#: ../../install_steps_interactive.pm_.c:1248
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Feil ved installasjon av aboot, \n"
"pr�ve � installere selv om det �delegger den f�rste partisjonen?"

#: ../../install_steps_interactive.pm_.c:1255
msgid "Installing bootloader"
msgstr "Installer oppstartslaster"

#: ../../install_steps_interactive.pm_.c:1261
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Installasjon av oppstartslaster mislykket. F�lgende feil oppsto:"

#: ../../install_steps_interactive.pm_.c:1269
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1313
#: ../../standalone/drakautoinst_.c:81
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Sett inn en tom diskett i stasjon %s"

#: ../../install_steps_interactive.pm_.c:1317
#: ../../standalone/drakautoinst_.c:83
msgid "Creating auto install floppy"
msgstr "Oppretter diskett for autoinstallasjon"

#: ../../install_steps_interactive.pm_.c:1328
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Noen trinn er ikke fullf�rt.\n"
"\n"
"�nsker du virkelig � avslutte n�?"

#: ../../install_steps_interactive.pm_.c:1339
#, fuzzy
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/82errata.php3\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Gratulerer, installasjonen er fullf�rt.\n"
"Fjern oppstartsmediet og trykk return for � starte p� nytt.\n"
"\n"
"For informasjon om endringer som er tilgjengelige for denne utgaven av "
"Mandrake Linux,\n"
"sjekk errataen tilgjengelig fra http://www.mandrakelinux.com/.\n"
"\n"
"Informasjon om konfigurering av systemet ditt finnes i post\n"
"install-kapittelet i Official Mandrake Linux User's Guide."

#: ../../install_steps_interactive.pm_.c:1356
msgid "Generate auto install floppy"
msgstr "Oppretter diskett for autoinstallasjon"

#: ../../install_steps_interactive.pm_.c:1358
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Autoinstallasjonen kan v�re fullstendig automatisk\n"
"hvis du �nsker det. Den vil da ta over harddisken!!\n"
"(dette er for � installere p� en annen maskin)\n"
"\n"
"Du kanskje �nske � kj�re installasjonen omigjen.\n"

#: ../../install_steps_interactive.pm_.c:1363
msgid "Automated"
msgstr "Automatisert"

#: ../../install_steps_interactive.pm_.c:1363
msgid "Replay"
msgstr "Gj�r igjen"

#: ../../install_steps_interactive.pm_.c:1366
msgid "Save packages selection"
msgstr "Lagre pakkevalg"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux installasjon %s"

#: ../../install_steps_newt.pm_.c:34
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> mellom elementer  | <Space> velger | <F12> neste skjerm "

#: ../../interactive.pm_.c:87
msgid "kdesu missing"
msgstr "kdesu mangler"

#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
msgid "consolehelper missing"
msgstr ""

#: ../../interactive.pm_.c:152
msgid "Choose a file"
msgstr "Velg en fil"

#: ../../interactive.pm_.c:314
msgid "Advanced"
msgstr "Avansert"

#: ../../interactive.pm_.c:315
msgid "Basic"
msgstr ""

#: ../../interactive.pm_.c:386
msgid "Please wait"
msgstr "Vennligst vent"

#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
msgid "Info"
msgstr "Info"

#: ../../interactive_gtk.pm_.c:715
msgid "Expand Tree"
msgstr "Utvid tre"

#: ../../interactive_gtk.pm_.c:716
msgid "Collapse Tree"
msgstr "Trekk sammen tre"

#: ../../interactive_gtk.pm_.c:717
msgid "Toggle between flat and group sorted"
msgstr "Skift mellom flat og gruppesortert"

#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
msgid "Bad choice, try again\n"
msgstr "D�rlig valg, pr�v igjen\n"

#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ditt valg? (standard %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Innganger du m� fylle:\n"
"%s"

#: ../../interactive_stdio.pm_.c:68
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Ditt valg? (0/1, standard `%s') "

#: ../../interactive_stdio.pm_.c:93
#, c-format
msgid "Button `%s': %s"
msgstr "Valg: `%s': %s"

#: ../../interactive_stdio.pm_.c:94
msgid "Do you want to click on this button? "
msgstr "�nsker du � klikke p� denne knappen? "

#: ../../interactive_stdio.pm_.c:103
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Ditt valg? (standard `%s'%s) "

#: ../../interactive_stdio.pm_.c:121
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Det er mange ting � velge fra (%s).\n"

#: ../../interactive_stdio.pm_.c:124
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: ../../interactive_stdio.pm_.c:137
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: ../../interactive_stdio.pm_.c:144
msgid "Re-submit"
msgstr ""

#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:206
msgid "Czech (QWERTZ)"
msgstr "Tsjekkisk (QWERTZ)"

#: ../../keyboard.pm_.c:176 ../../keyboard.pm_.c:208
msgid "German"
msgstr "Tysk"

#: ../../keyboard.pm_.c:177
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
msgid "Spanish"
msgstr "Spansk"

#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
msgid "Finnish"
msgstr "Finsk"

#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:217
msgid "French"
msgstr "Fransk"

#: ../../keyboard.pm_.c:181 ../../keyboard.pm_.c:242
msgid "Norwegian"
msgstr "Norsk"

#: ../../keyboard.pm_.c:182
msgid "Polish"
msgstr "Polsk"

#: ../../keyboard.pm_.c:183 ../../keyboard.pm_.c:250
msgid "Russian"
msgstr "Russisk"

#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:252
msgid "Swedish"
msgstr "Svensk"

#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
msgid "UK keyboard"
msgstr "UK-tastatur"

#: ../../keyboard.pm_.c:187 ../../keyboard.pm_.c:268
msgid "US keyboard"
msgstr "US-tastatur"

#: ../../keyboard.pm_.c:189
msgid "Albanian"
msgstr "Albansk"

#: ../../keyboard.pm_.c:190
msgid "Armenian (old)"
msgstr "Armensk (gammel)"

#: ../../keyboard.pm_.c:191
msgid "Armenian (typewriter)"
msgstr "Armensk (skrivemaskin)"

#: ../../keyboard.pm_.c:192
msgid "Armenian (phonetic)"
msgstr "Armensk (phon�tic)"

#: ../../keyboard.pm_.c:197
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjansk (latin)"

#: ../../keyboard.pm_.c:199
msgid "Belgian"
msgstr "Belgisk"

#: ../../keyboard.pm_.c:200
msgid "Bulgarian (phonetic)"
msgstr "Bulgarsk (phonetic)"

#: ../../keyboard.pm_.c:201
msgid "Bulgarian (BDS)"
msgstr "Bulgarsk (BDS)"

#: ../../keyboard.pm_.c:202
msgid "Brazilian (ABNT-2)"
msgstr "Brasiliansk (ABNT-2)"

#: ../../keyboard.pm_.c:203
msgid "Belarusian"
msgstr "Belarusian"

#: ../../keyboard.pm_.c:204
msgid "Swiss (German layout)"
msgstr "Sveisisk (tysk oppsett)"

#: ../../keyboard.pm_.c:205
msgid "Swiss (French layout)"
msgstr "Sveisisk (fransk oppsett)"

#: ../../keyboard.pm_.c:207
msgid "Czech (QWERTY)"
msgstr "Tsjekkisk (QWERTY)"

#: ../../keyboard.pm_.c:209
msgid "German (no dead keys)"
msgstr "Tysk (ingen d�de taster)"

#: ../../keyboard.pm_.c:210
msgid "Danish"
msgstr "Dansk"

#: ../../keyboard.pm_.c:211
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm_.c:212
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norsk)"

#: ../../keyboard.pm_.c:213
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Svensk)"

#: ../../keyboard.pm_.c:214
msgid "Estonian"
msgstr "Estlandsk"

#: ../../keyboard.pm_.c:218
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgisk (\"Russisk\" oppsett)"

#: ../../keyboard.pm_.c:219
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgisk (\"Latinsk\" oppsett)"

#: ../../keyboard.pm_.c:220
msgid "Greek"
msgstr "Gresk"

#: ../../keyboard.pm_.c:221
msgid "Hungarian"
msgstr "Ungarsk"

#: ../../keyboard.pm_.c:222
msgid "Croatian"
msgstr "Kroatisk"

#: ../../keyboard.pm_.c:223
msgid "Israeli"
msgstr "Israelsk"

#: ../../keyboard.pm_.c:224
msgid "Israeli (Phonetic)"
msgstr "Israelsk (Phonetic)"

#: ../../keyboard.pm_.c:225
msgid "Iranian"
msgstr "Iransk"

#: ../../keyboard.pm_.c:226
msgid "Icelandic"
msgstr "Islansk"

#: ../../keyboard.pm_.c:227
msgid "Italian"
msgstr "Italiensk"

#: ../../keyboard.pm_.c:229
msgid "Japanese 106 keys"
msgstr "Japansk 106 taster"

#: ../../keyboard.pm_.c:232
msgid "Korean keyboard"
msgstr "Koreansk tastatur"

#: ../../keyboard.pm_.c:233
msgid "Latin American"
msgstr "Latinamerikansk"

#: ../../keyboard.pm_.c:234
msgid "Lithuanian AZERTY (old)"
msgstr "Liauisk AZERTY (gammel)"

#: ../../keyboard.pm_.c:236
msgid "Lithuanian AZERTY (new)"
msgstr "Liauisk AZERTY (ny)"

#: ../../keyboard.pm_.c:237
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litauisk \"nummer-rekke\" QWERTY"

#: ../../keyboard.pm_.c:238
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litauisk \"phon�tic\" QWERTY"

#: ../../keyboard.pm_.c:239
msgid "Latvian"
msgstr "Lotvisk"

#: ../../keyboard.pm_.c:240
msgid "Macedonian"
msgstr "Makedonsk"

#: ../../keyboard.pm_.c:241
msgid "Dutch"
msgstr "Hollansk"

#: ../../keyboard.pm_.c:243
msgid "Polish (qwerty layout)"
msgstr "Polsk (qwerty oppsett)"

#: ../../keyboard.pm_.c:244
msgid "Polish (qwertz layout)"
msgstr "Polsk (qwertz oppsett)"

#: ../../keyboard.pm_.c:245
msgid "Portuguese"
msgstr "Portugisisk"

#: ../../keyboard.pm_.c:246
msgid "Canadian (Quebec)"
msgstr "Canadisk (Quebec)"

#: ../../keyboard.pm_.c:248
msgid "Romanian (qwertz)"
msgstr "Romansk (qwertz)"

#: ../../keyboard.pm_.c:249
msgid "Romanian (qwerty)"
msgstr "Romansk (qwerty)"

#: ../../keyboard.pm_.c:251
msgid "Russian (Yawerty)"
msgstr "Russisk (Yawerty)"

#: ../../keyboard.pm_.c:253
msgid "Slovenian"
msgstr "Slovensk"

#: ../../keyboard.pm_.c:254
msgid "Slovakian (QWERTZ)"
msgstr "Slovakisk (QWERTZ)"

#: ../../keyboard.pm_.c:255
msgid "Slovakian (QWERTY)"
msgstr "Slovakisk (QWERTY)"

#: ../../keyboard.pm_.c:257
msgid "Serbian (cyrillic)"
msgstr "Serbisk (cyrillic)"

#: ../../keyboard.pm_.c:259
msgid "Tamil"
msgstr "Tamilsk"

#: ../../keyboard.pm_.c:260
msgid "Thai keyboard"
msgstr "Thai-tastatur"

#: ../../keyboard.pm_.c:262
msgid "Tajik keyboard"
msgstr "Tajik-tastatur"

#: ../../keyboard.pm_.c:263
msgid "Turkish (traditional \"F\" model)"
msgstr "Tyrkisk (tradisjonell \"F\" modell)"

#: ../../keyboard.pm_.c:264
msgid "Turkish (modern \"Q\" model)"
msgstr "Tyrkisk (moderne \"Q\" modell)"

#: ../../keyboard.pm_.c:266
msgid "Ukrainian"
msgstr "Ukrainsk"

#: ../../keyboard.pm_.c:269
msgid "US keyboard (international)"
msgstr "US-tastatur (internasjonal)"

#: ../../keyboard.pm_.c:270
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamesisk \"nummer-rekke\" QWERTY"

#: ../../keyboard.pm_.c:271
msgid "Yugoslavian (latin)"
msgstr "Jugoslavisk (latin)"

#: ../../keyboard.pm_.c:279
msgid "Right Alt key"
msgstr ""

#: ../../keyboard.pm_.c:280
msgid "Both Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:281
msgid "Control and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:282
msgid "CapsLock key"
msgstr ""

#: ../../keyboard.pm_.c:283
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:284
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:285
msgid "\"Menu\" key"
msgstr ""

#: ../../keyboard.pm_.c:286
msgid "Left \"Windows\" key"
msgstr ""

#: ../../keyboard.pm_.c:287
msgid "Right \"Windows\" key"
msgstr ""

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Rund monterer %s\n"

#: ../../lvm.pm_.c:88
msgid "Remove the logical volumes first\n"
msgstr "Fjern de logiske partisjoner f�rst\n"

#: ../../modules.pm_.c:816
msgid ""
"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun-mus"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Generisk PS2 hjulmus"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
msgid "1 button"
msgstr "1 knapp"

#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
msgid "Generic 2 Button Mouse"
msgstr "Generisk 2-knappers mus"

#: ../../mouse.pm_.c:45
msgid "Generic"
msgstr "Generisk"

#: ../../mouse.pm_.c:46
msgid "Wheel"
msgstr "Hjul"

#: ../../mouse.pm_.c:49
msgid "serial"
msgstr "seriell"

#: ../../mouse.pm_.c:52
msgid "Generic 3 Button Mouse"
msgstr "Generisk 3-knappers mus"

#: ../../mouse.pm_.c:53
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:54
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:55
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:57
msgid "Logitech CC Series"
msgstr "Logitech CC-seriene (seriell)"

#: ../../mouse.pm_.c:58
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:60
msgid "MM Series"
msgstr "MM-seriene"

#: ../../mouse.pm_.c:61
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:62
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (seriell, gammel C7 type)"

#: ../../mouse.pm_.c:66
msgid "busmouse"
msgstr "bussmus"

#: ../../mouse.pm_.c:69
msgid "2 buttons"
msgstr "2 knapper"

#: ../../mouse.pm_.c:70
msgid "3 buttons"
msgstr "3 knapper"

#: ../../mouse.pm_.c:73
msgid "none"
msgstr "ingen"

#: ../../mouse.pm_.c:75
msgid "No mouse"
msgstr "Ingen mus"

#: ../../mouse.pm_.c:494
msgid "Please test the mouse"
msgstr "Vennligst test musen."

#: ../../mouse.pm_.c:495
msgid "To activate the mouse,"
msgstr "For � aktivere musen,"

#: ../../mouse.pm_.c:496
msgid "MOVE YOUR WHEEL!"
msgstr "BEVEG HJULET DITT!"

#: ../../my_gtk.pm_.c:412
msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"

#: ../../my_gtk.pm_.c:651
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../my_gtk.pm_.c:686
msgid "Finish"
msgstr "Avslutt"

#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1561
msgid "Next ->"
msgstr "Neste ->"

#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1559
msgid "<- Previous"
msgstr "<- Forrige"

#: ../../my_gtk.pm_.c:1019
msgid "Is this correct?"
msgstr "Er dette riktig?"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Koble opp mot Internett"

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Den mest vanlige m�ten � koble opp med adsl er pppoe.\n"
"Noen oppkoblinger bruker pptp, noen f� bruker dhcp.\n"
"Hvis du ikke vet, velg 'bruk pppoe'"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "bruk dhcp"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "bruk pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "bruk pptp"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr ""
"Hvilken dhcp klient �nsker du � bruke?\n"
"Standard er dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt.\n"
"Jeg kan ikke sette opp denne tilkoblingstypen."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:243
msgid "Choose the network interface"
msgstr "Velg nettverksgrensesnitt"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"Vennligst velg hvilket nettverksadapter du �nsker � bruke til � koble opp\n"
"mot Internett"

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "ingen nettverkskort funnet"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
msgid "Configuring network"
msgstr "Konfigurerer nettverk"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Vennligst entre vertsnavnet ditt hvis du vet det.\n"
"Noen DHCP tjenere trenger vertsnavnet for � virke.\n"
"Vertsnavnet ditt b�r v�re et full-kvalifisert vertsnavn,\n"
"som ``minboks.mittlab.mittfirma.no''."

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
msgid "Host name"
msgstr "Vertsnavn"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:174
#: ../../network/netconnect.pm_.c:201 ../../network/netconnect.pm_.c:224
#: ../../network/netconnect.pm_.c:232
msgid "Network Configuration Wizard"
msgstr "Nettverkskonfigurasjonveiviser"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "Eksternt ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Internt ISDN-kort"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Hva slags type er ISDN-tilknytningen din?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerfull\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Hvilken ISDN konfigurering foretrekker du?\n"
"\n"
"* Den gamle konfigurasjoen bruker isdn4net. Det har kraftfulle\n"
"  verkt�y, den det er vanskelig � konfigurere for en nybegynner,\n"
"  og er ikke standardbasert.\n"
"\n"
"' Det nye konfigurasjonsverkt�yet er enklere � forst�,\n"
"  mer standardisert, men med f�rre verkt�y.\n"
"\n"
"Vi anbefaler den nye konfigurasjonen.\n"
"\n"

#: ../../network/isdn.pm_.c:54
msgid "New configuration (isdn-light)"
msgstr "Ny konfigurasjon (isdn-light)"

#: ../../network/isdn.pm_.c:54
msgid "Old configuration (isdn4net)"
msgstr "Gamle konfigurasjonen (isdn4net)"

#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
#: ../../network/isdn.pm_.c:215
msgid "ISDN Configuration"
msgstr "ISDN-konfigurasjon"

#: ../../network/isdn.pm_.c:170
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"Velg din tilbyder.\n"
" Hvis denne ikke er i listen, velg ikke i listen"

#: ../../network/isdn.pm_.c:183
msgid "Europe protocol"
msgstr "Europaprotokollen"

#: ../../network/isdn.pm_.c:183
msgid "Europe protocol (EDSS1)"
msgstr "Europaprotokollen (EDSS1)"

#: ../../network/isdn.pm_.c:185
msgid "Protocol for the rest of the world"
msgstr "Protokoll for resten av verden"

#: ../../network/isdn.pm_.c:185
msgid ""
"Protocol for the rest of the world \n"
" no D-Channel (leased lines)"
msgstr ""
"Resten av verden \n"
" ingen D-kanal (leid linje)"

#: ../../network/isdn.pm_.c:189
msgid "Which protocol do you want to use ?"
msgstr "Hvilken protokoll �nsker du � bruke?"

#: ../../network/isdn.pm_.c:199
msgid "What kind of card do you have?"
msgstr "Hva slags kort har du?"

#: ../../network/isdn.pm_.c:200
msgid "I don't know"
msgstr "Jeg vet ikke"

#: ../../network/isdn.pm_.c:200
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:200
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:206
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"Hvis du har et ISA kort burde verdiene i neste bilde v�re riktige.\n"
"\n"
"Hvis du har et PCMCIA kort m� du vite irq og io for kortet.\n"

#: ../../network/isdn.pm_.c:210
msgid "Abort"
msgstr "Avbryt"

#: ../../network/isdn.pm_.c:210
msgid "Continue"
msgstr "Fortsett"

#: ../../network/isdn.pm_.c:216
msgid "Which is your ISDN card ?"
msgstr "Hvilket er ditt ISDN-kort?"

#: ../../network/isdn.pm_.c:235
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""
"Jeg har oppdaget et ISDN PCI-kort, men jeg vet ikke hviklet type. Vennligst "
"velg et PCI-kort i neste skjermbilde."

#: ../../network/isdn.pm_.c:244
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Ingen ISDN PCI-kort funnet. Vennligst velg et i neste skjermbilde."

#: ../../network/modem.pm_.c:39
msgid "Please choose which serial port your modem is connected to."
msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."

#: ../../network/modem.pm_.c:44
msgid "Dialup options"
msgstr "Opsjoner oppringt"

#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:621
msgid "Connection name"
msgstr "Navn tilknytning"

#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:622
msgid "Phone number"
msgstr "Telefonnummer"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:623
msgid "Login ID"
msgstr "Login ID"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625
msgid "CHAP"
msgstr ""

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625
msgid "Script-based"
msgstr "Scriptbasert"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:625
msgid "Terminal-based"
msgstr "Terminalbasert"

#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:626
msgid "Domain name"
msgstr "Domenenavn"

#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:627
msgid "First DNS Server (optional)"
msgstr "F�rste DNS-tjener (valgfri)"

#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:628
msgid "Second DNS Server (optional)"
msgstr "Andre DNS-tjener (valgfri)"

#: ../../network/netconnect.pm_.c:34
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Du kan koble ned eller rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Du kan rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm_.c:34
msgid "You are currently connected to internet."
msgstr "Du er for �yeblikket koblet opp mot Internett"

#: ../../network/netconnect.pm_.c:37
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"Du kan koble opp mot Internett eller rekonfigurere tilkoblingen din."

#: ../../network/netconnect.pm_.c:37
msgid "You are not currently connected to Internet."
msgstr "Du er for �yeblikket ikke koblet opp mot Internett."

#: ../../network/netconnect.pm_.c:41
msgid "Connect"
msgstr "Koble til"

#: ../../network/netconnect.pm_.c:43
msgid "Disconnect"
msgstr "Koble fra"

#: ../../network/netconnect.pm_.c:45
msgid "Configure the connection"
msgstr "Konfigurer tilkoblingen"

#: ../../network/netconnect.pm_.c:50
msgid "Internet connection & configuration"
msgstr "Internett tilkobling & konfigurasjon"

#: ../../network/netconnect.pm_.c:100
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Vi skal n� konfigurere din  %s tilkobling."

#: ../../network/netconnect.pm_.c:109
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Vi skal n� konfigurere %s oppkoblingen.\n"
"\n"
"\n"
"Trykk OK for � begynne."

#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:251
#: ../../network/netconnect.pm_.c:270 ../../network/tools.pm_.c:57
msgid "Network Configuration"
msgstr "Nettverkskonfigurasjon"

#: ../../network/netconnect.pm_.c:139
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Fordi du holder p� med en nettverksinstallasjon er ditt "
"nettverksoppsettallerede konfigurert.\n"
"Trykk OK for � beholde din eksisterende konfigurasjon, eller avbryt for � "
"rekonfigurere din internett og nettverkskonfigurasjon.\n"

#: ../../network/netconnect.pm_.c:165
msgid ""
"Welcome to The Network Configuration Wizard\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Velkommen til nettverkskonfigurasjon hjelperen\n"
"\n"
"Vi skal n� konfigurere din internett/nettverksoppkobling.\n"
"Hvis du ikke �nsker � bruke automatisk oppdagelse, fjern krysset\n"
"i boksen.\n"

#: ../../network/netconnect.pm_.c:167
msgid "Choose the profile to configure"
msgstr "Velg profilen som skal konfigureres"

#: ../../network/netconnect.pm_.c:168
msgid "Use auto detection"
msgstr "Bruk automatisk detektering"

#: ../../network/netconnect.pm_.c:174
msgid "Detecting devices..."
msgstr "Finner enheter..."

#: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194
msgid "Normal modem connection"
msgstr "Normal modemtilkobling"

#: ../../network/netconnect.pm_.c:185 ../../network/netconnect.pm_.c:194
#, c-format
msgid "detected on port %s"
msgstr "oppdaget p� port %s"

#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
msgid "ISDN connection"
msgstr "ISDN-tilkobling"

#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
#, c-format
msgid "detected %s"
msgstr "oppdaget %s"

#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
msgid "ADSL connection"
msgstr "ADSL oppkobling"

#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
#, c-format
msgid "detected on interface %s"
msgstr "oppdaget p� grensesnitt %s"

#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
msgid "Cable connection"
msgstr "Kabeltilkobling"

#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
msgid "cable connection detected"
msgstr "Kabeltilkobling detektert"

#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
msgid "LAN connection"
msgstr "Lokalt nettverksoppkobling"

#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
msgid "ethernet card(s) detected"
msgstr "oppdaget ethernettkort"

#: ../../network/netconnect.pm_.c:201
msgid "Choose the connection you want to configure"
msgstr "Velg oppkoblingen du �nsker � konfigurere"

#: ../../network/netconnect.pm_.c:225
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Du har konfigureret flere m�ter � koble deg mot internett p�.\n"
"Venligst velg den du �nsker � bruker.\n"
"\n"

#: ../../network/netconnect.pm_.c:226
msgid "Internet connection"
msgstr "Internett tilkobling"

#: ../../network/netconnect.pm_.c:232
msgid "Do you want to start the connection at boot?"
msgstr "�nsker du � starte tilkoblingen din ved oppstart?"

#: ../../network/netconnect.pm_.c:246
msgid "Network configuration"
msgstr "Nettverkskonfigurasjon"

#: ../../network/netconnect.pm_.c:247
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:251
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Et problem oppsto ved omstart av nettverket: \n"
"\n"
"%s"

#: ../../network/netconnect.pm_.c:260
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"Gratulerer, internett og nettverkskonfigurasjonen er fullf�rt.\n"
"\n"
"Konfigurasjonen vil n� bli aktivert.\n"

#: ../../network/netconnect.pm_.c:264
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Etter at det er ferding, anbefaler vi at du restarter X\n"
"slik at du unng�r problemer med at vertsnavnet forandres."

#: ../../network/netconnect.pm_.c:265
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration"
msgstr ""

#: ../../network/network.pm_.c:292
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"ADVARSEL: Denne enheten har tidligere blitt konfigurert til � koble opp mot "
"Internett.\n"
"Trykk OK for � beholde enhetens konfigurasjon.\n"
"Modifisering av feltene nedenfor vil overskrive denne konfigurasjonen."

#: ../../network/network.pm_.c:297
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Vennligst entre IP-konfigurasjonen for denne maskinen.\n"
"Hvert element b�r entres som en IP-adresse i punkt-desimal\n"
"notasjon (f.eks, 1.2.3.4)."

#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigurerer nettverksenhet %s"

#: ../../network/network.pm_.c:307
#, c-format
msgid " (driver %s)"
msgstr " (driver %s)"

#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
#: ../../standalone/draknet_.c:467
msgid "IP address"
msgstr "IP-adresse"

#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:468
msgid "Netmask"
msgstr "Nettmaske"

#: ../../network/network.pm_.c:311
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:311
msgid "Automatic IP"
msgstr "Automatisk IP"

#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:707
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adresse b�r v�re i format 1.2.3.4"

#: ../../network/network.pm_.c:361
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Vennligst entre vertsnavnet ditt.\n"
"Vertsnavnet ditt b�r v�re et full-kvalifisert vertsnavn,\n"
"s� som ``minboks.mittlab.mittfirma.no''.\n"
"Du kan ogs� entre IP-adressen til gateway'en hvis du har en"

#: ../../network/network.pm_.c:366
msgid "DNS server"
msgstr "DNS-tjener"

#: ../../network/network.pm_.c:367
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: ../../network/network.pm_.c:369
msgid "Gateway device"
msgstr "Gateway-enhet"

#: ../../network/network.pm_.c:381
msgid "Proxies configuration"
msgstr "Konfigurasjon proxy"

#: ../../network/network.pm_.c:382
msgid "HTTP proxy"
msgstr "HTTP-proxy"

#: ../../network/network.pm_.c:383
msgid "FTP proxy"
msgstr "FTP-proxy"

#: ../../network/network.pm_.c:384
msgid "Track network card id (usefull for laptops)"
msgstr ""

#: ../../network/network.pm_.c:387
msgid "Proxy should be http://..."
msgstr "Proxy burde v�re http://..."

#: ../../network/network.pm_.c:388
msgid "Proxy should be ftp://..."
msgstr "Proxy burde v�re ftp://..."

#: ../../network/tools.pm_.c:39
msgid "Internet configuration"
msgstr "Internett-konfigurasjon"

#: ../../network/tools.pm_.c:40
msgid "Do you want to try to connect to the Internet now?"
msgstr "Vil du pr�ve � koble opp mot Internett n�?"

#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
msgid "Testing your connection..."
msgstr "Tester tilkoblingen din..."

#: ../../network/tools.pm_.c:50
msgid "The system is now connected to Internet."
msgstr "Systemet er n� koblet opp mot Internett."

#: ../../network/tools.pm_.c:51
msgid "For Security reason, it will be disconnected now."
msgstr "Av sikkerhetsgrunner vil den bli frakoblet n�."

#: ../../network/tools.pm_.c:52
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Det ser ikke ut til at systemet er koblet til Internett.\n"
"Pr�v � rekonfigurere tilkoblingen din."

#: ../../network/tools.pm_.c:76
msgid "Connection Configuration"
msgstr "Konfigurasjon tilknytning."

#: ../../network/tools.pm_.c:77
msgid "Please fill or check the field below"
msgstr "Vennnligst fyll eller merk feltet under"

#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:607
msgid "Card IRQ"
msgstr "Kort IRQ"

#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:608
msgid "Card mem (DMA)"
msgstr "Kort mem (DMA)"

#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:609
msgid "Card IO"
msgstr "Kort IO"

#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:610
msgid "Card IO_0"
msgstr "Kort IO_0"

#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:611
msgid "Card IO_1"
msgstr "Kort IO_1"

#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:612
msgid "Your personal phone number"
msgstr "Ditt telefonnummer"

#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:613
msgid "Provider name (ex provider.net)"
msgstr "Navn tilbyder (f.eks. tilbyder.net)"

#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:614
msgid "Provider phone number"
msgstr "Telefonnummer tilbyder"

#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:615
msgid "Provider dns 1 (optional)"
msgstr "Tilbyder dns 1 (valgfri)"

#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:616
msgid "Provider dns 2 (optional)"
msgstr "Tilbyder dns 2 (valgfri)"

#: ../../network/tools.pm_.c:89
msgid "Choose your country"
msgstr "Velg land"

#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:619
msgid "Dialing mode"
msgstr "Oppringningsmodus"

#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:631
msgid "Connection speed"
msgstr "Oppkoblingshastighet"

#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:632
msgid "Connection timeout (in sec)"
msgstr "Oppkoblingens timout (i sekunder)"

#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:617
msgid "Account Login (user name)"
msgstr "Logg inn (brukernavn)"

#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:618
msgid "Account Password"
msgstr "Passord"

#: ../../partition_table.pm_.c:600
msgid "mount failed: "
msgstr "montering mislykket: "

#: ../../partition_table.pm_.c:664
msgid "Extended partition not supported on this platform"
msgstr "Utvidet partisjon ikke st�ttet p� denne plattformen"

#: ../../partition_table.pm_.c:682
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Du har et hull i partisjonstabellen din, men jeg kan ikke bruke det.\n"
"Den eneste l�sningen er � flytte prim�rpartisjonene dine for � ha hullet ved "
"siden av de utvidede partisjonene"

#: ../../partition_table.pm_.c:770
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Gjenoppretting fra fil %s mislykket: %s"

#: ../../partition_table.pm_.c:772
msgid "Bad backup file"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../partition_table.pm_.c:794
#, c-format
msgid "Error writing to file %s"
msgstr "Feil ved skriving til fil %s"

#: ../../partition_table_raw.pm_.c:186
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Noe som ikke er bra skjer med disken din. \n"
"En test for � sjekke dataintegritet var mislykket. \n"
"Dette betyr at � skrive noe til disken vil av og til ende opp som ubrukelig"

#: ../../pkgs.pm_.c:24
msgid "must have"
msgstr "m� ha"

#: ../../pkgs.pm_.c:25
msgid "important"
msgstr "viktig"

#: ../../pkgs.pm_.c:26
msgid "very nice"
msgstr "veldig bra"

#: ../../pkgs.pm_.c:27
msgid "nice"
msgstr "bra"

#: ../../pkgs.pm_.c:28
msgid "maybe"
msgstr "kanskje"

#: ../../printer.pm_.c:23
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../printer.pm_.c:24
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: ../../printer.pm_.c:25
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: ../../printer.pm_.c:26
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: ../../printer.pm_.c:32 ../../printer.pm_.c:864
msgid "CUPS"
msgstr "CUPS"

#: ../../printer.pm_.c:33
msgid "LPRng"
msgstr "LPRng"

#: ../../printer.pm_.c:34
msgid "LPD"
msgstr "LPD"

#: ../../printer.pm_.c:35
msgid "PDQ"
msgstr "PDQ"

#: ../../printer.pm_.c:40
msgid "Local printer"
msgstr "Lokal skriver"

#: ../../printer.pm_.c:41
msgid "Remote printer"
msgstr "Fjern-skriver"

#: ../../printer.pm_.c:42
msgid "Printer on remote CUPS server"
msgstr "Skriver p� fjern-CUPS tjener"

#: ../../printer.pm_.c:43
msgid "Printer on remote lpd server"
msgstr "Skriver p� fjern-lpd tjener"

#: ../../printer.pm_.c:44
msgid "Network printer (TCP/Socket)"
msgstr "Nettverksskriver (TCP/Socket)"

#: ../../printer.pm_.c:45
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Skriver p� SMB/Windows 95/98/NT server"

#: ../../printer.pm_.c:46
msgid "Printer on NetWare server"
msgstr "Skriver p� en NetWare tjener"

#: ../../printer.pm_.c:47
msgid "Enter a printer device URI"
msgstr "Skriverenhetens URI"

#: ../../printer.pm_.c:48
msgid "Pipe job into a command"
msgstr "Pipe inn i kommando"

#: ../../printer.pm_.c:497 ../../printer.pm_.c:688 ../../printer.pm_.c:1010
#: ../../printerdrake.pm_.c:1638 ../../printerdrake.pm_.c:2686
msgid "Unknown model"
msgstr "Ukjent modell"

#: ../../printer.pm_.c:525
msgid "Local Printers"
msgstr "Lokale skrivere"

#: ../../printer.pm_.c:527 ../../printer.pm_.c:865
msgid "Remote Printers"
msgstr "Fjern-skrivers"

#: ../../printer.pm_.c:534 ../../printerdrake.pm_.c:248
#, c-format
msgid " on parallel port \\/*%s"
msgstr " p� parallelport \\/*%s"

#: ../../printer.pm_.c:537 ../../printerdrake.pm_.c:250
#, c-format
msgid ", USB printer \\/*%s"
msgstr ", USB skriver \\/*%s"

#: ../../printer.pm_.c:542
#, c-format
msgid ", multi-function device on parallel port \\/*%s"
msgstr ", multifunksjonsenhet p� parallelport \\/*%s"

#: ../../printer.pm_.c:545
msgid ", multi-function device on USB"
msgstr ", multifunksjonsenhet p� USB"

#: ../../printer.pm_.c:547
msgid ", multi-function device on HP JetDirect"
msgstr ", multifunksjonsenhet p� HP JetDirect"

#: ../../printer.pm_.c:549
msgid ", multi-function device"
msgstr ", multifunksjonsenhet"

#: ../../printer.pm_.c:552
#, c-format
msgid ", printing to %s"
msgstr ", skriver til %s"

#: ../../printer.pm_.c:554
#, c-format
msgid "on LPD server \"%s\", printer \"%s\""
msgstr "p� LPD tjener \"%s\", skriver \"%s\""

#: ../../printer.pm_.c:556
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", TCP/IP vert \"%s\", port %s"

#: ../../printer.pm_.c:560
#, c-format
msgid "on Windows server \"%s\", share \"%s\""
msgstr "p� Windows tjener \"%s\", del \"%s\""

#: ../../printer.pm_.c:564
#, c-format
msgid "on Novell server \"%s\", printer \"%s\""
msgstr "p� Novell tjener \"%s\", skriver \"%s\""

#: ../../printer.pm_.c:566
#, c-format
msgid ", using command %s"
msgstr ", bruker kommando %s"

#: ../../printer.pm_.c:685 ../../printerdrake.pm_.c:1109
msgid "Raw printer (No driver)"
msgstr "R� skriver (ingen driver)"

#: ../../printer.pm_.c:834
#, c-format
msgid "(on %s)"
msgstr "(p� %s)"

#: ../../printer.pm_.c:836
msgid "(on this machine)"
msgstr "(p� denne maskin)"

#: ../../printer.pm_.c:861
#, c-format
msgid "On CUPS server \"%s\""
msgstr "P� CUPS tjener \"%s\""

#: ../../printer.pm_.c:867 ../../printerdrake.pm_.c:2348
#: ../../printerdrake.pm_.c:2359 ../../printerdrake.pm_.c:2574
#: ../../printerdrake.pm_.c:2626 ../../printerdrake.pm_.c:2653
#: ../../printerdrake.pm_.c:2823 ../../printerdrake.pm_.c:2825
msgid " (Default)"
msgstr " (Standard)"

#: ../../printerdrake.pm_.c:22
msgid "Select Printer Connection"
msgstr "Velg skrivertilkobling"

#: ../../printerdrake.pm_.c:23
msgid "How is the printer connected?"
msgstr "Hvordan er skriveren tilkoblet?"

#: ../../printerdrake.pm_.c:25
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Skrivere p� fjern CUPS tjenere trenger du ikke � konfigurere her; disse "
"skriverene vil bli oppdaget automatisk."

#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2411
msgid "CUPS configuration"
msgstr "CUPS konfigurasjon"

#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2412
msgid "Specify CUPS server"
msgstr "Spesifiser CUPS tjener"

#: ../../printerdrake.pm_.c:71
#, fuzzy
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"do not have to configure anything; the CUPS servers inform your machine "
"automatically about their printers. All printers currently known to your "
"machine are listed in the \"Remote printers\" section in the main window of "
"Printerdrake. When your CUPS server is not in your local network, you have "
"to enter the CUPS server IP address and optionally the port number to get "
"the printer information from the server, otherwise leave these fields blank."
msgstr ""
"Med en fjern-CUPs tjener trenger du ikke � konfigurere noen\n"
"skrivere her; CUPS-tjenere gir din maskin informasjon om \n"
"skriverne automatisk. Alle skrivere som for �yeblikket er kjent\n"
"for din maskin vil v�re under \"Standardskriver\". Velg standard-\n"
"skriveren du �nsker, og klikk p� \"Bruk/Les skriverlisten\" knappen. \n"
"Trykk p� den samme listen for � oppfriske listen. (det kan ta opptil 30\n"
"sekunder fra CUPS starter til alle skrivere er tilgjengelige).\n"
"N�r din CUPS-tjener er p� et annen nettverk m� du oppgi\n"
"CUPS-tjenerens IPa ddresse og eventuelle portnummer for � f�\n"
"skriverinformasjon fra tjeneren, ellers kan du la de feltene v�re blanke."

#: ../../printerdrake.pm_.c:72
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your network "
"environment, so that you can access the printers on the CUPS servers in your "
"local network. If this does not work correctly, turn off \"Automatic CUPS "
"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
"forget to restart CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printerdrake.pm_.c:76
msgid "The IP address should look like 192.168.1.20"
msgstr "IP-adresse b�r v�re i format 1.2.3.4"

#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:835
msgid "The port number should be an integer!"
msgstr "Portnummer burde v�re numerisk"

#: ../../printerdrake.pm_.c:87
msgid "CUPS server IP"
msgstr "CUPS tjener IP"

#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:828
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:90
msgid "Automatic CUPS configuration"
msgstr "Automatisk CUPS konfigurasjon"

#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
msgid "Detecting devices ..."
msgstr "Finner enheter ..."

#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
msgid "Test ports"
msgstr "Test porter"

#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2394
#: ../../printerdrake.pm_.c:2513
msgid "Add a new printer"
msgstr "Legg til en ny skriver"

#: ../../printerdrake.pm_.c:168
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:462
msgid "Local Printer"
msgstr "Lokal skriver"

#: ../../printerdrake.pm_.c:177
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in your printer(s) on this computer and turn it/them on. Click "
"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
"set up your printer(s) now.\n"
"\n"
"Note that some computers can crash during the printer auto-detection, turn "
"off \"Auto-detect printers\" to do a printer installation without auto-"
"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
"printing on a remote printer if printerdrake does not list it automatically."
msgstr ""

#: ../../printerdrake.pm_.c:186
msgid "Auto-detect printers"
msgstr "Finn skrivere automatisk"

#: ../../printerdrake.pm_.c:204
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""

#: ../../printerdrake.pm_.c:223
msgid "Auto-Detection of Printers"
msgstr "Automatisk detektering av skrivere"

#: ../../printerdrake.pm_.c:224
msgid ""
"Printerdrake is able to auto-detect your locally connected parallel and USB "
"printers for you, but note that on some systems the auto-detection CAN "
"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
"YOUR OWN RISK!\n"
"\n"
"Do you really want to get your printers auto-detected?"
msgstr ""

#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
#: ../../printerdrake.pm_.c:230
msgid "Do auto-detection"
msgstr "Utf�r automatisk detektering"

#: ../../printerdrake.pm_.c:228
msgid "Set up printer manually"
msgstr "Sett opp skriver manuellt"

#: ../../printerdrake.pm_.c:256
#, c-format
msgid "Detected %s"
msgstr "Oppdaget %s"

#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
#: ../../printerdrake.pm_.c:306
#, c-format
msgid "Printer on parallel port \\/*%s"
msgstr "Skriver p� parallelport \\/*%s"

#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
#: ../../printerdrake.pm_.c:311
#, c-format
msgid "USB printer \\/*%s"
msgstr "USB skriver \\/*%s"

#: ../../printerdrake.pm_.c:379
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printerdrake.pm_.c:383
msgid "You must enter a device or file name!"
msgstr "Du m� legge til en enhet eller et filnavn!"

#: ../../printerdrake.pm_.c:394
msgid ""
"No local printer found!\n"
"\n"
msgstr "Ingen lokal skriver funnet!\n"

#: ../../printerdrake.pm_.c:395
msgid ""
"Network printers can only be installed after the installation. Choose "
"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
msgstr ""

#: ../../printerdrake.pm_.c:396
msgid ""
"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
"\", and click \"Add a new printer\" again."
msgstr ""

#: ../../printerdrake.pm_.c:407
msgid ""
"The following printer was auto-detected, if it is not the one you want to "
"configure, enter a device name/file name in the input line"
msgstr ""

#: ../../printerdrake.pm_.c:408
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up or enter a device name/file name in the input line"
msgstr ""

#: ../../printerdrake.pm_.c:410
msgid ""
"The following printer was auto-detected. The configuration of the printer "
"will work fully automatically. If your printer was not correctly detected or "
"if you prefer a customized printer configuration, turn on \"Manual "
"configuration\"."
msgstr ""

#: ../../printerdrake.pm_.c:411
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up. The configuration of the printer will work fully "
"automatically. If your printer was not correctly detected or if you prefer a "
"customized printer configuration, turn on \"Manual configuration\"."
msgstr ""

#: ../../printerdrake.pm_.c:413
msgid ""
"Please choose the port where your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: ../../printerdrake.pm_.c:414
#, fuzzy
msgid "Please choose the port where your printer is connected to."
msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."

#: ../../printerdrake.pm_.c:416
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printerdrake.pm_.c:421
#, fuzzy
msgid "You must choose/enter a printer/device!"
msgstr "Skriverenhetens URI"

#: ../../printerdrake.pm_.c:441
#, fuzzy
msgid "Manual configuration"
msgstr "Internett-konfigurasjon"

#: ../../printerdrake.pm_.c:463
msgid ""
"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart "
"LaserJet 1100/1200/1220/3200 with scanner)?"
msgstr ""

#: ../../printerdrake.pm_.c:477
#, fuzzy
msgid "Installing HPOJ package..."
msgstr "Installerer pakke %s"

#: ../../printerdrake.pm_.c:482
msgid "Checking device and configuring HPOJ ..."
msgstr ""

#: ../../printerdrake.pm_.c:500
#, fuzzy
msgid "Installing SANE package..."
msgstr "Installerer pakke %s"

#: ../../printerdrake.pm_.c:512
msgid "Scanning on your HP multi-function device"
msgstr ""

#: ../../printerdrake.pm_.c:529
#, fuzzy
msgid "Making printer port available for CUPS ..."
msgstr "Leser skriverdata: ..."

#: ../../printerdrake.pm_.c:539 ../../printerdrake.pm_.c:991
#: ../../printerdrake.pm_.c:1105
#, fuzzy
msgid "Reading printer database ..."
msgstr "Leser skriverdata: ..."

#: ../../printerdrake.pm_.c:619
msgid "Remote lpd Printer Options"
msgstr "Opsjoner for fjern-lpd skriver"

#: ../../printerdrake.pm_.c:620
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"For � bruke en fjern-lpd skriverk�, m� du oppgi vertsnavnet\n"
"til skrivertjeneren og k�navnet p� den tjeneren som\n"
"jobbene skal plasseres i."

#: ../../printerdrake.pm_.c:621
msgid "Remote host name"
msgstr "Fjern-vertsnavn"

#: ../../printerdrake.pm_.c:622
msgid "Remote printer name"
msgstr "Fjern-skrivers navn"

#: ../../printerdrake.pm_.c:625
msgid "Remote host name missing!"
msgstr "Det eksterne vertsnavnet mangler!"

#: ../../printerdrake.pm_.c:629
msgid "Remote printer name missing!"
msgstr "Det eksterne vertsnavnet mangler!"

#: ../../printerdrake.pm_.c:697
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opsjoner for SMB (Windows 9x/NT) skriver"

#: ../../printerdrake.pm_.c:698
#, fuzzy
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"For � skrive til en SMB-skriver, m� du oppgi SMB-vertsnavnet\n"
"(Merk! Dette kan v�re forskjellig fra dens TCP/IP-vertsnavn!)\n"
"og muligens IP-adressen til skrivertjeneren, s� vel som det delte\n"
"navnet til skriveren du �nsker tilgang til og anvendelige brukernavn,\n"
"passord og arbeidsgruppeinformasjon."

#: ../../printerdrake.pm_.c:699
msgid "SMB server host"
msgstr "SMB-tjener vert"

#: ../../printerdrake.pm_.c:700
msgid "SMB server IP"
msgstr "SMB-tjener IP"

#: ../../printerdrake.pm_.c:701
msgid "Share name"
msgstr "Navn deling"

#: ../../printerdrake.pm_.c:704
msgid "Workgroup"
msgstr "Arbeidsgruppe"

#: ../../printerdrake.pm_.c:711
msgid "Either the server name or the server's IP must be given!"
msgstr "Servernavnet eller serverens IP m� oppgis!"

#: ../../printerdrake.pm_.c:715
msgid "Samba share name missing!"
msgstr "Samba delenavn mangler!"

#: ../../printerdrake.pm_.c:774
msgid "NetWare Printer Options"
msgstr "NetWare skriveropsjoner"

#: ../../printerdrake.pm_.c:775
#, fuzzy
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"For � skrive til en NetWare-skriver, m� du oppgi navnet til NetWare-\n"
"skrivertjeneren (Mer! Dette kan v�re forskjellig fra dens TCP/IP-\n"
"vertsnavn!) s� vel som navnet p� skriverk�en til skriveren du �nsker\n"
"adgang til og anvendelige brukernavn og passord."

#: ../../printerdrake.pm_.c:776
msgid "Printer Server"
msgstr "Skrivertjener"

#: ../../printerdrake.pm_.c:777
msgid "Print Queue Name"
msgstr "Skriverk�-navn"

#: ../../printerdrake.pm_.c:782
msgid "NCP server name missing!"
msgstr "NCP servernavn mangler!"

#: ../../printerdrake.pm_.c:786
msgid "NCP queue name missing!"
msgstr "NCP k�navn mangler!"

#: ../../printerdrake.pm_.c:825
#, fuzzy
msgid "TCP/Socket Printer Options"
msgstr "Opsjoner for lokal skriver"

#: ../../printerdrake.pm_.c:826
#, fuzzy
msgid ""
"To print to a TCP or socket printer, you need to provide the host name of "
"the printer and optionally the port number. On HP JetDirect servers the port "
"number is usually 9100, on other servers it can vary. See the manual of your "
"hardware."
msgstr ""
"For � skrive til en socket skriver, trenger du � gi meg\n"
"vertsnavnet til skriveren, og eventuelt portnummer.\n"
"P� en HP JetDirect tjener er portnummeret vanligvis\n"
"9100, p� andre tjenere varierer det. Sjekk manualen til\n"
"din tjener."

#: ../../printerdrake.pm_.c:827
msgid "Printer host name"
msgstr "Skriverens vertsnavn"

#: ../../printerdrake.pm_.c:831
msgid "Printer host name missing!"
msgstr "Skriverens vertsnavn mangler!"

#: ../../printerdrake.pm_.c:860 ../../printerdrake.pm_.c:862
msgid "Printer Device URI"
msgstr "Skriverenhet URI"

#: ../../printerdrake.pm_.c:861
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Du kan direkte oppgi URI til skriveren. URIen m� v�re i henhold til enten "
"CUPS eller Foomatic standarden. Ikke alle typer URIer st�ttes av "
"k�behandlerene."

#: ../../printerdrake.pm_.c:876
msgid "A valid URI must be entered!"
msgstr "En korrekt URI m� oppgis!"

#: ../../printerdrake.pm_.c:977
#, fuzzy
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Alle skrivere trenger ett navn (f.eks. lp).\n"
"Beskrivelsen og lokalisasjonsfeltene trenger ikke \n"
"� fylles inn. De er brukerkommentarer."

#: ../../printerdrake.pm_.c:978
msgid "Name of printer"
msgstr "Navn p� skriver"

#: ../../printerdrake.pm_.c:979
msgid "Description"
msgstr "Beskrivelse"

#: ../../printerdrake.pm_.c:980
msgid "Location"
msgstr "Lokasjon"

#: ../../printerdrake.pm_.c:994
#, fuzzy
msgid "Preparing printer database ..."
msgstr "Leser skriverdata: ..."

#: ../../printerdrake.pm_.c:1085
#, fuzzy
msgid "Your printer model"
msgstr "Fjern-skrivers navn"

#: ../../printerdrake.pm_.c:1086
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: ../../printerdrake.pm_.c:1091 ../../printerdrake.pm_.c:1094
#, fuzzy
msgid "The model is correct"
msgstr "Er dette riktig?"

#: ../../printerdrake.pm_.c:1092 ../../printerdrake.pm_.c:1093
#: ../../printerdrake.pm_.c:1096
#, fuzzy
msgid "Select model manually"
msgstr "Sett opp skriver manuellt"

#: ../../printerdrake.pm_.c:1112
msgid "Printer model selection"
msgstr "Skrivervalg"

#: ../../printerdrake.pm_.c:1113
msgid "Which printer model do you have?"
msgstr "Hva slags type skriver har du?"

#: ../../printerdrake.pm_.c:1114
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Search the correct model in the list when the cursor is "
"standing on a wrong model or on \"Raw printer\"."
msgstr ""

#: ../../printerdrake.pm_.c:1117
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: ../../printerdrake.pm_.c:1193
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "Modifiser skriverkonfigurasjon"

#: ../../printerdrake.pm_.c:1194
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: ../../printerdrake.pm_.c:1237 ../../printerdrake.pm_.c:1264
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "Internett-konfigurasjon"

#: ../../printerdrake.pm_.c:1238
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: ../../printerdrake.pm_.c:1265
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
"your model and afterwards \"Linux\" as operating system. The drivers come as "
"RPM packages or shell scripts with interactive graphical installation. You "
"do not need to do this configuration by the graphical frontends. Cancel "
"directly after the license agreement. Then print printhead alignment pages "
"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
"program."
msgstr ""

#: ../../printerdrake.pm_.c:1481
#, fuzzy
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Standardskriverens instillinger\n"
"Du b�r sjekke at sidest�rrelsen og blekktypen\n"
"er satt riktig. Merk deg at veldig god utskriftskvalitet\n"
"kan gj�re utskriften treg."

#: ../../printerdrake.pm_.c:1490
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Valg %s m� v�re ett helt tall!"

#: ../../printerdrake.pm_.c:1494
#, c-format
msgid "Option %s must be a number!"
msgstr "Valg %s m� v�re ett tall!"

#: ../../printerdrake.pm_.c:1499
#, c-format
msgid "Option %s out of range!"
msgstr "Valg %s er utenfor rekkevidden!"

#: ../../printerdrake.pm_.c:1538
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "�nsker du virkelig � fjerne skriveren \"%s\"?"

#: ../../printerdrake.pm_.c:1555
msgid "Test pages"
msgstr "Testsider"

#: ../../printerdrake.pm_.c:1556
#, fuzzy
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Vennligst velg testsidene du �nsker � skrive ut.\n"
"Merk deg, fototestsiden kan ta lang tid � skrive ut,\n"
"og p� laserskrivere med for lite minne vil den ikke\n"
"skrives ut i det hele tatt. Som regel vil det holde �\n"
"skrive ut standard testside."

#: ../../printerdrake.pm_.c:1560
msgid "No test pages"
msgstr "Ingen testsider"

#: ../../printerdrake.pm_.c:1561
msgid "Print"
msgstr "Skriv ut"

#: ../../printerdrake.pm_.c:1563
msgid "Standard test page"
msgstr "Standard testside"

#: ../../printerdrake.pm_.c:1566
msgid "Alternative test page (Letter)"
msgstr "Alternativ testside (letter)"

#: ../../printerdrake.pm_.c:1569
msgid "Alternative test page (A4)"
msgstr "Alternativ testside (A4)"

#: ../../printerdrake.pm_.c:1571
msgid "Photo test page"
msgstr "Fototestside"

#: ../../printerdrake.pm_.c:1575
#, fuzzy
msgid "Do not print any test page"
msgstr "Skriver ut testsider"

#: ../../printerdrake.pm_.c:1583 ../../printerdrake.pm_.c:1720
msgid "Printing test page(s)..."
msgstr "Skriver ut testside(r)..."

#: ../../printerdrake.pm_.c:1608
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
"Det kan ta litt tid f�r skriveren starter.\n"
"Utskriftstatus:\n"
"%s\n"
"\n"

#: ../../printerdrake.pm_.c:1612
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Testsiden(e) har blitt sendt til skriver-daemonen.\n"
"Det kan ta litt tid f�r skriveren starter.\n"

#: ../../printerdrake.pm_.c:1619
msgid "Did it work properly?"
msgstr "Virker det som det skal?"

#: ../../printerdrake.pm_.c:1640 ../../printerdrake.pm_.c:2688
#, fuzzy
msgid "Raw printer"
msgstr "Ingen skriver"

#: ../../printerdrake.pm_.c:1658
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1660
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1663 ../../printerdrake.pm_.c:1679
#: ../../printerdrake.pm_.c:1689
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printerdrake.pm_.c:1666 ../../printerdrake.pm_.c:1705
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1669
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1674 ../../printerdrake.pm_.c:1684
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1676 ../../printerdrake.pm_.c:1686
#: ../../printerdrake.pm_.c:1696
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1681 ../../printerdrake.pm_.c:1691
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: ../../printerdrake.pm_.c:1694
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1698
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1702
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1711 ../../printerdrake.pm_.c:1717
#: ../../printerdrake.pm_.c:1718 ../../printerdrake.pm_.c:1719
#: ../../printerdrake.pm_.c:2672 ../../standalone/drakbackup_.c:754
#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:580
#: ../../standalone/drakfont_.c:774
msgid "Close"
msgstr "Lukk"

#: ../../printerdrake.pm_.c:1714 ../../printerdrake.pm_.c:1726
#, fuzzy, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Tar ned nettverket"

#: ../../printerdrake.pm_.c:1715 ../../printerdrake.pm_.c:1727
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Tar ned nettverket"

#: ../../printerdrake.pm_.c:1717
#, fuzzy
msgid "Print option list"
msgstr "Opsjoner for skriver"

#: ../../printerdrake.pm_.c:1739
#, c-format
msgid ""
"Your HP multi-function device was configured automatically to be able to "
"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
"the scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
"to get more information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printerdrake.pm_.c:1745
#, c-format
msgid ""
"Your HP multi-function device was configured automatically to be able to "
"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
"Scanning via a graphical interface or from the GIMP is not supported yet for "
"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
"1200 you can only scan when you have the scanner option installed.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printerdrake.pm_.c:1767 ../../printerdrake.pm_.c:2178
#: ../../printerdrake.pm_.c:2442 ../../standalone/printerdrake_.c:49
msgid "Reading printer data ..."
msgstr "Leser skriverdata: ..."

#: ../../printerdrake.pm_.c:1787 ../../printerdrake.pm_.c:1815
#: ../../printerdrake.pm_.c:1850
msgid "Transfer printer configuration"
msgstr "Overf�r skriverkonfigurasjon"

#: ../../printerdrake.pm_.c:1788
#, fuzzy, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Du kan kopiere skriverkonfigurasjonen du har satt opp for k�tjeneren\n"
"%s til %s, din n�v�rende k�tjener. All konfigurasjonsdata (skrivernavn,\n"
"beskrivelse, tilkoblingstype og standardinstillinger) blir overtatt, men \n"
"ikke jobber.\n"
"Ikke alle k�er kan overf�res grunnet:\n"

#: ../../printerdrake.pm_.c:1791
#, fuzzy
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS st�tter ikke skrivere p� Novelltjenere eller skrivere som\n"
"sender dataene inn i en fritt formet kommando.\n"

#: ../../printerdrake.pm_.c:1793
#, fuzzy
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ st�tter bare lokale skrivere, fjern-LPD skrivere, og\n"
"Socket/TCP skrivere.\n"

#: ../../printerdrake.pm_.c:1795
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD og LPRng st�tter ikke IPP skrivere.\n"

#: ../../printerdrake.pm_.c:1797
#, fuzzy
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"I tillegg, k�er laget med dette programmet\n"
"eller \"foomatic -configure\" kan ikke overflyttes."

#: ../../printerdrake.pm_.c:1798
#, fuzzy
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Skrivere konfigurert med PPD filene som produsenten har\n"
"laget eller med CUPS drivere ikke ikke overflyttes."

#: ../../printerdrake.pm_.c:1799
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Velg skriverene som du vil overflytte og klikk\n"
"\"Overf�r\"."

#: ../../printerdrake.pm_.c:1802
msgid "Do not transfer printers"
msgstr "Ikke overf�r skrivere"

#: ../../printerdrake.pm_.c:1803 ../../printerdrake.pm_.c:1820
msgid "Transfer"
msgstr "Overf�r"

#: ../../printerdrake.pm_.c:1816
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"En skriver med navnet \"%s\" eksisterer allerede p� %s. \n"
"Klikk \"Overf�r\" for � overskrive.\n"
"Du kan ogs� gi ett nytt skrivernavn, eller hoppe over denne skriveren."

#: ../../printerdrake.pm_.c:1824
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Skrivernavn b�r inneholde kun bokstaver, tall og understrek"

#: ../../printerdrake.pm_.c:1829
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Skriveren \"%s\" eksisterer allerede,\n"
"�nsker du � overskrive dens konfigurasjon?"

#: ../../printerdrake.pm_.c:1837
msgid "New printer name"
msgstr "Nytt skrivernavn"

#: ../../printerdrake.pm_.c:1840
#, c-format
msgid "Transferring %s ..."
msgstr "Overf�rer %s ..."

#: ../../printerdrake.pm_.c:1851
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: ../../printerdrake.pm_.c:1860
#, fuzzy
msgid "Refreshing printer data ..."
msgstr "Leser skriverdata: ..."

#: ../../printerdrake.pm_.c:1868 ../../printerdrake.pm_.c:1931
#: ../../printerdrake.pm_.c:1943
#, fuzzy
msgid "Configuration of a remote printer"
msgstr "Konfigurasjon Lilo/Grub"

#: ../../printerdrake.pm_.c:1869
#, fuzzy
msgid "Starting network ..."
msgstr "Starter tilkoblingen din..."

#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1899
#: ../../printerdrake.pm_.c:1901
#, fuzzy
msgid "Configure the network now"
msgstr "Konfigurer nettverk"

#: ../../printerdrake.pm_.c:1896
#, fuzzy
msgid "Network functionality not configured"
msgstr "Monitor er ikke konfigurert"

#: ../../printerdrake.pm_.c:1897
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: ../../printerdrake.pm_.c:1900
msgid "Go on without configuring the network"
msgstr "Fortsett uten � konfigurere nettverket"

#: ../../printerdrake.pm_.c:1933
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network gets accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""

#: ../../printerdrake.pm_.c:1934
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: ../../printerdrake.pm_.c:1944
msgid "Restarting printing system ..."
msgstr "Starter skriversystemet p� nytt ..."

#: ../../printerdrake.pm_.c:1982
msgid "high"
msgstr "h�y"

#: ../../printerdrake.pm_.c:1982
msgid "paranoid"
msgstr "paranoid"

#: ../../printerdrake.pm_.c:1983
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printerdrake.pm_.c:1984
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: ../../printerdrake.pm_.c:2016
msgid "Starting the printing system at boot time"
msgstr ""

#: ../../printerdrake.pm_.c:2017
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: ../../printerdrake.pm_.c:2040 ../../printerdrake.pm_.c:2070
#: ../../printerdrake.pm_.c:2100 ../../printerdrake.pm_.c:2133
#: ../../printerdrake.pm_.c:2238
msgid "Checking installed software..."
msgstr "Sjekker installert programvare..."

#: ../../printerdrake.pm_.c:2074
msgid "Removing LPRng..."
msgstr "Fjerner LPRng..."

#: ../../printerdrake.pm_.c:2104
msgid "Removing LPD..."
msgstr "Fjerner LPD..."

#: ../../printerdrake.pm_.c:2162
msgid "Select Printer Spooler"
msgstr "Velg skrivertk�behandler"

#: ../../printerdrake.pm_.c:2163
msgid "Which printing system (spooler) do you want to use?"
msgstr "Hvilket utskriftsystem (spooler) �nsker du � bruke?"

#: ../../printerdrake.pm_.c:2196
#, c-format
msgid "Configuring printer \"%s\" ..."
msgstr "Konfigurerer skriver \"%s\" ..."

#: ../../printerdrake.pm_.c:2209
msgid "Installing Foomatic ..."
msgstr "Installerer Foomatic ..."

#: ../../printerdrake.pm_.c:2266 ../../printerdrake.pm_.c:2305
#: ../../printerdrake.pm_.c:2689 ../../printerdrake.pm_.c:2759
msgid "Printer options"
msgstr "Opsjoner for skriver"

#: ../../printerdrake.pm_.c:2275
msgid "Preparing PrinterDrake ..."
msgstr "Klargj�rer PrinterDrake ..."

#: ../../printerdrake.pm_.c:2292 ../../printerdrake.pm_.c:2846
msgid "Configuring applications..."
msgstr "Konfigurerer applikasjoner..."

#: ../../printerdrake.pm_.c:2312
msgid "Would you like to configure printing?"
msgstr "�nsker du � konfigurere en skriver?"

#: ../../printerdrake.pm_.c:2324
msgid "Printing system: "
msgstr "Utskriftssystem: "

#: ../../printerdrake.pm_.c:2372
msgid "Printerdrake"
msgstr "Printerdrake"

#: ../../printerdrake.pm_.c:2376
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star/Open Office."
msgstr ""
"Her er f�lgende skriverk�.\n"
"Du kan legge til flere eller endre de eksisterende."

#: ../../printerdrake.pm_.c:2377
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Her er f�lgende skriverk�.\n"
"Du kan legge til flere eller endre de eksisterende."

#: ../../printerdrake.pm_.c:2403
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: ../../printerdrake.pm_.c:2421
msgid "Change the printing system"
msgstr "Endrer utskriftssystemet"

#: ../../printerdrake.pm_.c:2426 ../../standalone/draknet_.c:278
msgid "Normal Mode"
msgstr "Normalt modus"

#: ../../printerdrake.pm_.c:2581 ../../printerdrake.pm_.c:2631
#: ../../printerdrake.pm_.c:2840
msgid "Do you want to configure another printer?"
msgstr "�nsker du � konfigurere enda en skriver?"

#: ../../printerdrake.pm_.c:2667
msgid "Modify printer configuration"
msgstr "Modifiser skriverkonfigurasjon"

#: ../../printerdrake.pm_.c:2669
#, fuzzy, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Skriver %s %s %s\n"
"Hva �nsker du � forandre p�, p� denne maskinen?"

#: ../../printerdrake.pm_.c:2673
msgid "Do it!"
msgstr "Gj�r det!"

#: ../../printerdrake.pm_.c:2678 ../../printerdrake.pm_.c:2733
msgid "Printer connection type"
msgstr "Skrivertilkoblingstype"

#: ../../printerdrake.pm_.c:2679 ../../printerdrake.pm_.c:2737
msgid "Printer name, description, location"
msgstr "Skrivernavn, beskrivelse, sted"

#: ../../printerdrake.pm_.c:2681 ../../printerdrake.pm_.c:2752
msgid "Printer manufacturer, model, driver"
msgstr "Skriverprodusent, modell, driver"

#: ../../printerdrake.pm_.c:2682 ../../printerdrake.pm_.c:2753
msgid "Printer manufacturer, model"
msgstr "Skriverprodusent, modell"

#: ../../printerdrake.pm_.c:2691 ../../printerdrake.pm_.c:2763
msgid "Set this printer as the default"
msgstr "Sett denne skriveren som standard"

#: ../../printerdrake.pm_.c:2693 ../../printerdrake.pm_.c:2768
msgid "Add this printer to Star/Open Office"
msgstr "Legg denne skriveren til Star/Open Office"

#: ../../printerdrake.pm_.c:2694 ../../printerdrake.pm_.c:2777
msgid "Remove this printer from Star/Open Office"
msgstr "Fjern denne skriveren fra Star/Open Office"

#: ../../printerdrake.pm_.c:2695 ../../printerdrake.pm_.c:2786
msgid "Print test pages"
msgstr "Skriver ut testsider"

#: ../../printerdrake.pm_.c:2696 ../../printerdrake.pm_.c:2788
msgid "Know how to use this printer"
msgstr "Vet hvordan man skal bruke denne skriveren"

#: ../../printerdrake.pm_.c:2698 ../../printerdrake.pm_.c:2790
msgid "Remove printer"
msgstr "Fjern skriver"

#: ../../printerdrake.pm_.c:2742
#, c-format
msgid "Removing old printer \"%s\" ..."
msgstr "Fjerner gammel skriver \"%s\" ..."

#: ../../printerdrake.pm_.c:2766
msgid "Default printer"
msgstr "Standardskriver"

#: ../../printerdrake.pm_.c:2767
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Skriveren \"%s\" er n� satt til standard skriver."

#: ../../printerdrake.pm_.c:2771 ../../printerdrake.pm_.c:2774
msgid "Adding printer to Star/Open Office"
msgstr "Legger skriver til Star/Open Office"

#: ../../printerdrake.pm_.c:2772
#, c-format
msgid "The printer \"%s\" was successfully added to Star/Open Office."
msgstr "Skriveren \"%s\" ble vellykket lagt til Star/Open Office."

#: ../../printerdrake.pm_.c:2775
#, c-format
msgid "Failed to add the printer \"%s\" to Star/Open Office."
msgstr ""

#: ../../printerdrake.pm_.c:2780 ../../printerdrake.pm_.c:2783
msgid "Removing printer from Star/Open Office"
msgstr ""

#: ../../printerdrake.pm_.c:2781
#, c-format
msgid "The printer \"%s\" was successfully removed from Star/Open Office."
msgstr ""

#: ../../printerdrake.pm_.c:2784
#, c-format
msgid "Failed to remove the printer \"%s\" from Star/Open Office."
msgstr ""

#: ../../printerdrake.pm_.c:2792
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "�nsker du virkelig � fjerne skriveren \"%s\"?"

#: ../../printerdrake.pm_.c:2794
#, fuzzy, c-format
msgid "Removing printer \"%s\" ..."
msgstr "Leser skriverdata: ..."

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
msgid "Proxy configuration"
msgstr "Proxy-konfigurasjon"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""
"Velkommen til proxy-konfigurasjonsverkt�yet.\n"
"\n"
"Her kan du sette opp dine http og ftp proxier\n"
"med eller uten brukernavn og passord\n"

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""
"Vennligst fill ut med http proxy informasjon\n"
"La feltet v�re hvis du ikke �nsker en http proxy"

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr "URL"

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
msgid "port"
msgstr "port"

#: ../../proxy.pm_.c:44
msgid "Url should begin with 'http:'"
msgstr "URLen b�r begynne med \"http:\""

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
msgid "The port part should be numeric"
msgstr "Portnummer burde v�re numerisk"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""
"Vennligst fyll ut ftp-proxy informasjonen-nLa feltet v�re hvis du ikke "
"�nsker en ftp-proxy"

#: ../../proxy.pm_.c:65
msgid "Url should begin with 'ftp:'"
msgstr "URLen b�r begynne med \"ftp:\""

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""
"Vennligst skriv inn proxy brukernavn og passord, hvis det eksisterer.\n"
"La det v�re hvis du ikke �nsker brukernavn/passord"

#: ../../proxy.pm_.c:80
msgid "login"
msgstr "brukernavn"

#: ../../proxy.pm_.c:82
msgid "password"
msgstr "passord"

#: ../../proxy.pm_.c:84
msgid "re-type password"
msgstr "skriv inn passord p� nytt"

#: ../../proxy.pm_.c:88
msgid "The passwords don't match. Try again!"
msgstr "Passordene stemmer ikke overens. Pr�v igjen!"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Kan ikke legge til en partisjon til _formattert_ RAID md%d"

#: ../../raid.pm_.c:111
#, c-format
msgid "Can't write file %s"
msgstr "Kan ikke skrive fil %s"

#: ../../raid.pm_.c:136
msgid "mkraid failed"
msgstr "mkraid mislykket"

#: ../../raid.pm_.c:136
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid mislykket (kanskje raidtool mangler?)"

#: ../../raid.pm_.c:152
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ikke nok partisjoner for RAID niv� %d\n"

#: ../../services.pm_.c:14
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystem"

#: ../../services.pm_.c:15
msgid "Anacron a periodic command scheduler."
msgstr "Anacron en periodisk kommandoplanlegger."

#: ../../services.pm_.c:16
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd blir brukt til overv�kning av batteristatus og logging av dette via "
"syslog.\n"
"Kan ogs� brukes til � sl� av maskinen n�r batteriet er d�rlig."

#: ../../services.pm_.c:18
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Kj�rer kommandoer planlagt av at kommandoen ved tidspunkt spesifisert n�r\n"
"at ble kj�rt, og kj�rer batch kommandoer n�r lastingsmengden er lav nok."

#: ../../services.pm_.c:20
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron er et standard UNIX-program som kj�rer brukerspesifiserte programmer\n"
"ved periodisk planlagte tider. vixie cron gir flere funksjoner til vanlig "
"UNIX cron,\n"
"inkludert bedre sikkerhet og mere kraftfulle konfigurasjonsopsjoner."

#: ../../services.pm_.c:23
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM gir musest�tte til tekstbaserte Linux applikasjoner som\n"
"Midnight Commander. Den lar ogs� musebaserte konsoller foreta klipp-og-lim "
"operasjoner,\n"
"og inkluderer st�tte for pop-up menyer i konsollen."

#: ../../services.pm_.c:26
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake kj�rer et maskinvares�k, og kan konfigurere ny/endret\n"
"maskinvare."

#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:403
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache er en World Wide Web tjener. Den blir brukt til � tjene HTML-filer\n"
"og CGI."

#: ../../services.pm_.c:29
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internett supertjenerdaemonen (vanligvis kalt inetd) starter\n"
"varierende Internett-tjenester ettersom det trengs. Den er ansvarlig for � "
"starte\n"
"mange tjenester, inkludert telnet, ftp, rsh, og rlogin. Stopping av inetd "
"stopper\n"
"alle tjenestene den er ansvarlig for."

#: ../../services.pm_.c:33
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Start pakkefiltrering for Linux kjerne 2.2 serien for � sette\n"
"opp en brannmur for � beskytte maskinen din fra nettverksangrep."

#: ../../services.pm_.c:35
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Denne pakken laster det valgte tastaturkartet som er satt i\n"
"/etc/sysconfig/keyboard. Dette kan bli valgt ved bruk av kbdconfig "
"verkt�yet.\n"
"For de fleste maskiner b�r dette v�re aktivert."

#: ../../services.pm_.c:38
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatisk regenerering av kjernehode i /boot for\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../services.pm_.c:40
msgid "Automatic detection and configuration of hardware at boot."
msgstr "automatisk oppdagelse og konfigurering av maskinvare ved oppstart."

#: ../../services.pm_.c:41
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf vil noen ganger arrangere utf�relse av forskjellige\n"
"oppgaver ved oppstart for � vedlikeholde systemkonfigurasjon."

#: ../../services.pm_.c:43
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd er skriverdaemonen som beh�ves for at lpr skal virke ordentlig. Den er\n"
"i hovedsak en tjener som fordeler utskriftsjobber til skriveren(e)."

#: ../../services.pm_.c:45
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server, brukt for � bygge en tjener med h�y ytelse og\n"
"tilgjengelighet."

#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:404
#, fuzzy
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) er en Domain Name Server (DNS) som brukes til � bestemme\n"
"vertsnavn til IP-adresser."

#: ../../services.pm_.c:48
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Monterer og demonterer alle Network File System (NFS), SMB (Lan\n"
"Manager/Windows), og NCP (NetWare) monteringspunkter."

#: ../../services.pm_.c:50
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiverer/deaktiverer alle nettverksgrensesnitt konfigurert til � starte\n"
"ved oppstart."

#: ../../services.pm_.c:52
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
"Denne tjenesten tilbyr NFS-tjener funksjonalitet som er konfigurert via\n"
"/etc/exports filen."

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS er en popul�r protokoll for fildeling over TCP/IP nettverk.\n"
"Denne tjenesten tilbyr NFS fill�sing funksjonalitet."

#: ../../services.pm_.c:57
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Sl�r automatisk p� numlock-tast i konsoll og XFree ved\n"
"oppstart."

#: ../../services.pm_.c:59
msgid "Support the OKI 4w and compatible winprinters."
msgstr "St�tter OKI 4w og kompatible winskrivere."

#: ../../services.pm_.c:60
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA st�tte er vanligvis st�tte for ting som ethernet og\n"
"modem i b�rbare PC'er. Den vil ikke starte uten konfigurasjon s� det er "
"trygt\n"
"� ha denne installert p� maskiner som ikke trenger det."

#: ../../services.pm_.c:63
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper h�ndterer RPC-tilknytninger, som brukes av protokoller\n"
"som NFS og NIS. Portmap-tjeneren m� kj�res p� maskiner som brukes som\n"
"tjenere for protokoller som bruker RPC-mekanismen."

#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:406
#, fuzzy
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix er en posttransporteringsagent, som er et program som\n"
"flytter post fra en maskin til en annen."

#: ../../services.pm_.c:67
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Lagrer og gjenoppretter system entropy pool for h�yere kvalitet p�\n"
"tilfeldig nummergenerering."

#: ../../services.pm_.c:69
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""
"Tilordne r� enheter til blokkenheter (som harddisk-\n"
"partisjoner) for bruk av applikasjoner som Oracle"

#: ../../services.pm_.c:71
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Den rutete daemonen tillater automatisk oppdatering av IP rutertabell via\n"
"RIP-protokollen. Mens RIP er mye brukt p� sm� nettverk, trengs mere "
"komplekse\n"
"rutingprotokoller for komplekse nettverk."

#: ../../services.pm_.c:74
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokollen lar brukere p� et nettverk finne ytelses-\n"
"metrikser for alle maskinene p� nettverket."

#: ../../services.pm_.c:76
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokollen lar brukere p� et nettverk identifisere hvem som\n"
"er logget inn p� andre maskiner."

#: ../../services.pm_.c:78
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokollen lar fjernbrukere motta en liste over alle brukerne\n"
"som er logget p� en maskin som kj�rer rwho-daemonen (lik finger)."

#: ../../services.pm_.c:80
msgid "Launch the sound system on your machine"
msgstr "Start lydsystemet p� maskinen din"

#: ../../services.pm_.c:81
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog er en fasilitet som mange daemoner bruker til � logge beskjeder\n"
"til forskjellige systemloggfiler. Det er en god ide � alltid kj�re syslog."

#: ../../services.pm_.c:83
msgid "Load the drivers for your usb devices."
msgstr "Last driverene for dine usb enheter."

#: ../../services.pm_.c:84
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
"Starter X-font tjeneren (dette er obligatorisk for at XFree skal kj�re)."

#: ../../services.pm_.c:110 ../../services.pm_.c:152
msgid "Choose which services should be automatically started at boot time"
msgstr "Velg hvilke tjenester som skal startes automatisk ved oppstart"

#: ../../services.pm_.c:122
#, fuzzy
msgid "Printing"
msgstr "Skriv ut"

#: ../../services.pm_.c:123
msgid "Internet"
msgstr "Internett"

#: ../../services.pm_.c:126
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
#, fuzzy
msgid "System"
msgstr "Systemmodus"

#: ../../services.pm_.c:133
#, fuzzy
msgid "Remote Administration"
msgstr "Opsjoner for fjern-lpd skriver"

#: ../../services.pm_.c:141
#, fuzzy
msgid "Database Server"
msgstr "Database"

#: ../../services.pm_.c:170
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:186
#, fuzzy
msgid "Services"
msgstr "Tjener"

#: ../../services.pm_.c:198
msgid "running"
msgstr "kj�rer"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "stoppet"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr "Tjenester og daemoner"

#: ../../services.pm_.c:217
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Ingen tilleggsinformasjon\n"
"om denne tjenesten, begklager."

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "Ved oppstart"

#: ../../services.pm_.c:236
#, fuzzy
msgid "Start"
msgstr "Status"

#: ../../services.pm_.c:236
#, fuzzy
msgid "Stop"
msgstr "Sektor"

#: ../../share/advertising/00-thanks.pl_.c:9
msgid "Thank you for choosing Mandrake Linux 8.2"
msgstr ""

#: ../../share/advertising/00-thanks.pl_.c:10
msgid "Welcome to the Open Source world"
msgstr ""

#: ../../share/advertising/00-thanks.pl_.c:11
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""

#: ../../share/advertising/01-gnu.pl_.c:9
#, fuzzy
msgid "Join the Free Software world"
msgstr "Protokoll for resten av verden"

#: ../../share/advertising/01-gnu.pl_.c:10
msgid ""
"Get to know the Open Source community and become a member. Learn, teach, and "
"help others by joining the many discussion forums that you will find in our "
"\"Community\" webpages"
msgstr ""

#: ../../share/advertising/02-internet.pl_.c:9
#, fuzzy
msgid "Internet and Messaging"
msgstr "Internett-tilgang"

#: ../../share/advertising/02-internet.pl_.c:10
msgid ""
"Mandrake Linux 8.2 provides the best software to access everything the "
"Internet has to offer: Surf the web & view animations with Mozilla and "
"Konqueror, exchange email & organize your personal information with "
"Evolution and Kmail, and much more"
msgstr ""

#: ../../share/advertising/03-graphic.pl_.c:9
#, fuzzy
msgid "Multimedia and Graphics"
msgstr "Multimedia - Grafikk"

#: ../../share/advertising/03-graphic.pl_.c:10
msgid ""
"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
"the latest software to play music and audio files, edit and organize your "
"images and photos, watch TV and videos, and much more"
msgstr ""

#: ../../share/advertising/04-develop.pl_.c:9
msgid "Development"
msgstr "Utvikling"

#: ../../share/advertising/04-develop.pl_.c:10
msgid ""
"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
"of the GNU gcc compiler as well as the best Open Source development "
"environments"
msgstr ""

#: ../../share/advertising/05-contcenter.pl_.c:9
#, fuzzy
msgid "Mandrake Control Center"
msgstr "Kontrollpanel"

#: ../../share/advertising/05-contcenter.pl_.c:10
msgid ""
"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
"customizing and configuring your Mandrake system"
msgstr ""

#: ../../share/advertising/06-user.pl_.c:9
#, fuzzy
msgid "User interfaces"
msgstr "Nettverksgrensesnitt"

#: ../../share/advertising/06-user.pl_.c:10
msgid ""
"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
"0.8, and the rest"
msgstr ""

#: ../../share/advertising/07-server.pl_.c:9
#, fuzzy
msgid "Server Software"
msgstr "SMB-tjener vert"

#: ../../share/advertising/07-server.pl_.c:10
msgid ""
"Transform your machine into a powerful server with just a few clicks of the "
"mouse: Web server, email, firewall, router, file and print server, ..."
msgstr ""

#: ../../share/advertising/08-games.pl_.c:9
msgid "Games"
msgstr "Spill"

#: ../../share/advertising/08-games.pl_.c:10
msgid ""
"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
"cards, sports, strategy, ..."
msgstr ""

#: ../../share/advertising/09-MDKcampus.pl_.c:9
msgid "MandrakeCampus"
msgstr ""

#: ../../share/advertising/09-MDKcampus.pl_.c:10
msgid ""
"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
"provides free Linux training, as well as a way to test your progress, at "
"MandrakeCampus -- our online training center"
msgstr ""

#: ../../share/advertising/10-MDKexpert.pl_.c:9
#, fuzzy
msgid "MandrakeExpert"
msgstr "Ekspert"

#: ../../share/advertising/10-MDKexpert.pl_.c:10
msgid ""
"Quality support from the Linux Community, and from MandrakeSoft, is just "
"around the corner. And if you're already a Linux veteran, become an \"Expert"
"\" and share your knowledge at our support website"
msgstr ""

#: ../../share/advertising/11-consul.pl_.c:9
msgid "MandrakeConsulting"
msgstr ""

#: ../../share/advertising/11-consul.pl_.c:10
msgid ""
"For all of your IT projects, our consultants are ready to analyze your "
"requirements and offer a customized solution. Benefit from MandrakeSoft's "
"vast experience as a Linux producer to provide a true IT alternative for "
"your business organization"
msgstr ""

#: ../../share/advertising/12-MDKstore.pl_.c:9
msgid "MandrakeStore"
msgstr ""

#: ../../share/advertising/12-MDKstore.pl_.c:10
msgid ""
"A full range of Linux solutions, as well as special offers on products and "
"'goodies', are available online at our e-store"
msgstr ""

#: ../../share/advertising/13-Nvert.pl_.c:9
msgid ""
"For more information on MandrakeSoft's Professional Services and commercial "
"offerings, please see the following web page:"
msgstr ""

#: ../../share/advertising/13-Nvert.pl_.c:11
msgid "http://www.mandrakesoft.com/sales/contact"
msgstr ""

#: ../../standalone.pm_.c:25
#, fuzzy
msgid "Installing packages..."
msgstr "Installerer pakke %s"

#: ../../standalone/diskdrake_.c:85
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Jeg kan ikke lese partisjonstabellen din, den er for �delagt for meg :(\n"
"Jeg vil f�rs�ke � blanke ut d�rlige partisjoner"

#: ../../standalone/drakautoinst_.c:45
msgid "Error!"
msgstr "Feil!"

#: ../../standalone/drakautoinst_.c:46
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Jeg kan ikke finne filen '%s' som jeg trenger."

#: ../../standalone/drakautoinst_.c:48
msgid "Auto Install Configurator"
msgstr "Autoinstallasjonskonfigurering"

#: ../../standalone/drakautoinst_.c:49
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Du holder p� med � konfigurere en automatisk installasjonsdiskett. Denne "
"muligheten erlitt farlig, og m� brukes forsiktig.\n"
"\n"
"Med denne muligeten vil du kunne kj�re installasjonen du gjennomf�rte p� "
"denne maskinenp� nytt, med muligheten for � selv kunne forandre p� noen av "
"instillingene.\n"
"\n"
"For maksimal sikkerhet vil partisjoneringen og formateringen aldri bli "
"gjennomf�rt automatisk, uansett hva du valgte under installasjonen.\n"
"\n"
"�nsker du � fortsette?"

#: ../../standalone/drakautoinst_.c:71
msgid "Automatic Steps Configuration"
msgstr "Konfigurasjon av automatiske skritt"

#: ../../standalone/drakautoinst_.c:72
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Vennligst velg for hvert steg om det skal v�re som under installasjonen, "
"eller manuelt"

#: ../../standalone/drakautoinst_.c:145
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:662
msgid "Congratulations!"
msgstr "Gratulerer!"

#: ../../standalone/drakautoinst_.c:244
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketten har blitt generert.\n"
"Du kan n� gjennomf�re installasjonen p� nytt."

#: ../../standalone/drakautoinst_.c:282
#, fuzzy
msgid "Auto Install"
msgstr "Installer"

#: ../../standalone/drakautoinst_.c:344
#, fuzzy
msgid "Add an item"
msgstr "Legg til en bruker"

#: ../../standalone/drakautoinst_.c:351
#, fuzzy
msgid "Remove the last item"
msgstr "Formaterer loopback-fil %s"

#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
#: ../../standalone/drakbackup_.c:455
msgid ""
"***********************************************************************\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:449
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:450
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:453
msgid ""
"\n"
"\n"
"***********************************************************************\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:454
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:476
msgid "total progess"
msgstr ""

#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
msgid "Backup system files..."
msgstr ""

#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
#, fuzzy
msgid "Hard Disk Backup files..."
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:615
#, fuzzy
msgid "Backup User files..."
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:616
msgid "Hard Disk Backup Progress..."
msgstr ""

#: ../../standalone/drakbackup_.c:666
#, fuzzy
msgid "Backup Other files..."
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:674
#, c-format
msgid ""
"file list send by FTP : %s\n"
" "
msgstr ""

#: ../../standalone/drakbackup_.c:677
msgid ""
"\n"
"(!) FTP connexion problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:687
msgid "(!) Error during mail sending. \n"
msgstr ""

#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:770
#, fuzzy
msgid "File Selection"
msgstr "Pakkevalg"

#: ../../standalone/drakbackup_.c:755
msgid "Select the files or directories and click on 'Add'"
msgstr ""

#: ../../standalone/drakbackup_.c:790
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:791
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:792
msgid "Backup your System files. ( /etc directory )"
msgstr ""

#: ../../standalone/drakbackup_.c:793
msgid "Use incremental backup  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:794
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: ../../standalone/drakbackup_.c:795
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""

#: ../../standalone/drakbackup_.c:812
#, fuzzy
msgid "Please check all users that you want to include in your backup."
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:839
msgid "Do not include the browser cache"
msgstr ""

#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:810
#, fuzzy
msgid "Remove Selected"
msgstr "Fjern inngang"

#: ../../standalone/drakbackup_.c:900
#, fuzzy
msgid "Windows (FAT32)"
msgstr "Fjern Windows(TM)"

#: ../../standalone/drakbackup_.c:939
#, fuzzy
msgid "Users"
msgstr "Brukernavn"

#: ../../standalone/drakbackup_.c:964
msgid "Use FTP connection to backup"
msgstr ""

#: ../../standalone/drakbackup_.c:967
#, fuzzy
msgid "Please enter the host name or IP."
msgstr "Vennligst test musen."

#: ../../standalone/drakbackup_.c:972
msgid ""
"Please enter the directory to\n"
" put the backup on this host."
msgstr ""

#: ../../standalone/drakbackup_.c:977
#, fuzzy
msgid "Please enter your login"
msgstr "Vennligst pr�v igjen"

#: ../../standalone/drakbackup_.c:982
#, fuzzy
msgid "Please enter your password"
msgstr "Vennligst pr�v igjen"

#: ../../standalone/drakbackup_.c:988
#, fuzzy
msgid "Remember this password"
msgstr "skriv inn passord p� nytt"

#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
#, fuzzy
msgid "FTP Connection"
msgstr "Lokalt nettverksoppkobling"

#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
#, fuzzy
msgid "Secure Connection"
msgstr "Velg skrivertilkobling"

#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
msgid "Use CD/DVDROM to backup"
msgstr ""

#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
#, fuzzy
msgid "Please choose your CD space"
msgstr "Vennligst velg tastatur-oppsettet ditt."

#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
#, fuzzy
msgid "Please check if you are using CDRW media"
msgstr "Vennligst klikk p� en partisjon"

#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
msgid "Please check if you want to erase your CDRW before"
msgstr ""

#: ../../standalone/drakbackup_.c:1106
#, fuzzy
msgid ""
"Please check if you want to include\n"
" install boot on your CD."
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:1112
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""

#: ../../standalone/drakbackup_.c:1153
#, fuzzy
msgid "Use tape to backup"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:1156
msgid "Please enter the device name to use for backup"
msgstr ""

#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
#: ../../standalone/drakbackup_.c:2013
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""

#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
#, fuzzy
msgid "Please enter the directory to save:"
msgstr "Vennligst test musen."

#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
#, fuzzy
msgid "Use quota for backup files."
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:1267
#, fuzzy
msgid "Network"
msgstr "Nettverksgrensesnitt"

#: ../../standalone/drakbackup_.c:1272
msgid "CDROM / DVDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:1277
msgid "HardDrive / NFS"
msgstr ""

#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
#: ../../standalone/drakbackup_.c:1305
msgid "hourly"
msgstr ""

#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
#: ../../standalone/drakbackup_.c:1305
msgid "daily"
msgstr ""

#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
#: ../../standalone/drakbackup_.c:1305
msgid "weekly"
msgstr ""

#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
#: ../../standalone/drakbackup_.c:1305
msgid "monthly"
msgstr ""

#: ../../standalone/drakbackup_.c:1312
#, fuzzy
msgid "Use daemon"
msgstr "Brukernavn"

#: ../../standalone/drakbackup_.c:1317
#, fuzzy
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:1323
#, fuzzy
msgid ""
"Please choose the\n"
"media for backup."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../standalone/drakbackup_.c:1327
#, fuzzy
msgid "Use Hard Drive with daemon"
msgstr "Oppdaging av harddisk"

#: ../../standalone/drakbackup_.c:1329
#, fuzzy
msgid "Use FTP with daemon"
msgstr "Brukernavn"

#: ../../standalone/drakbackup_.c:1333
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""

#: ../../standalone/drakbackup_.c:1369
msgid "Send mail report after each backup to :"
msgstr ""

#: ../../standalone/drakbackup_.c:1411
msgid "What"
msgstr ""

#: ../../standalone/drakbackup_.c:1416
#, fuzzy
msgid "Where"
msgstr "Hjul"

#: ../../standalone/drakbackup_.c:1421
#, fuzzy
msgid "When"
msgstr "Hjul"

#: ../../standalone/drakbackup_.c:1426
#, fuzzy
msgid "More Options"
msgstr "Modulopsjoner:"

#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
#, fuzzy
msgid "Drakbackup Configuration"
msgstr "Nettverkskonfigurasjon"

#: ../../standalone/drakbackup_.c:1463
#, fuzzy
msgid "Please choose where you want to backup"
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:1465
msgid "on Hard Drive"
msgstr ""

#: ../../standalone/drakbackup_.c:1476
msgid "across Network"
msgstr ""

#: ../../standalone/drakbackup_.c:1540
#, fuzzy
msgid "Please choose what you want to backup"
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:1541
#, fuzzy
msgid "Backup system"
msgstr "Oppsett filsystemer"

#: ../../standalone/drakbackup_.c:1542
msgid "Backup Users"
msgstr ""

#: ../../standalone/drakbackup_.c:1545
msgid "Select user manually"
msgstr ""

#: ../../standalone/drakbackup_.c:1627
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: ../../standalone/drakbackup_.c:1628
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1630
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1632
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1634
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path : %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1635
#, c-format
msgid ""
"\n"
"- Save on FTP on host : %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1636
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: ../../standalone/drakbackup_.c:1637
#, fuzzy
msgid ""
"\n"
"- Options:\n"
msgstr "Valg"

#: ../../standalone/drakbackup_.c:1638
msgid "\tDo not include System Files\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1639
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1640
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1641
#, c-format
msgid ""
"\n"
"- Daemon (%s) include :\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1642
msgid "\t-Hard drive.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1643
msgid "\t-CDROM.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1644
msgid "\t-Network by FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1645
msgid "\t-Network by SSH.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1647
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1652
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1753
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1755
#, fuzzy
msgid "Please uncheck or remove it on next time."
msgstr "Vennligst velg hvilken serieport modemet ditt koblet til."

#: ../../standalone/drakbackup_.c:1765
msgid "Backup files are corrupted"
msgstr ""

#: ../../standalone/drakbackup_.c:1786
msgid "          All your selectionned data have been          "
msgstr ""

#: ../../standalone/drakbackup_.c:1787
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr ""

#: ../../standalone/drakbackup_.c:1886
#, fuzzy
msgid "         Restore Configuration       "
msgstr "Nettverkskonfigurasjon"

#: ../../standalone/drakbackup_.c:1904
msgid "OK to restore the other files."
msgstr ""

#: ../../standalone/drakbackup_.c:1922
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: ../../standalone/drakbackup_.c:1972
#, fuzzy
msgid "Backup the system files before:"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:1974
#, fuzzy
msgid "please choose the date to restore"
msgstr "Vennligst velg din musetype."

#: ../../standalone/drakbackup_.c:2002
#, fuzzy
msgid "Use Hard Disk to backup"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:2083
msgid "Restore from Hard Disk."
msgstr ""

#: ../../standalone/drakbackup_.c:2085
msgid "Please enter the directory where backups are stored"
msgstr ""

#: ../../standalone/drakbackup_.c:2143
#, fuzzy
msgid "Select another media to restore from"
msgstr "Vennligst velg din musetype."

#: ../../standalone/drakbackup_.c:2145
#, fuzzy
msgid "Other Media"
msgstr "Andre"

#: ../../standalone/drakbackup_.c:2151
#, fuzzy
msgid "Restore system"
msgstr "Installer systemet"

#: ../../standalone/drakbackup_.c:2152
msgid "Restore Users"
msgstr ""

#: ../../standalone/drakbackup_.c:2153
msgid "Restore Other"
msgstr ""

#: ../../standalone/drakbackup_.c:2155
msgid "select path to restore (instead of / )"
msgstr ""

#: ../../standalone/drakbackup_.c:2159
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: ../../standalone/drakbackup_.c:2160
msgid "Remove user directories before restore."
msgstr ""

#: ../../standalone/drakbackup_.c:2217
msgid "Restore all backups"
msgstr ""

#: ../../standalone/drakbackup_.c:2225
#, fuzzy
msgid "Custom Restore"
msgstr "Skreddersydd"

#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
msgid "Help"
msgstr ""

#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
#, fuzzy
msgid "Previous"
msgstr "<- Forrige"

#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
#: ../../standalone/logdrake_.c:216
#, fuzzy
msgid "Save"
msgstr "Status"

#: ../../standalone/drakbackup_.c:2317
#, fuzzy
msgid "Build Backup"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
#, fuzzy
msgid "Restore"
msgstr "Skreddersydd"

#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
#: ../../standalone/drakbackup_.c:2445
#, fuzzy
msgid "Next"
msgstr "Neste ->"

#: ../../standalone/drakbackup_.c:2478
msgid ""
"Please Build backup before to restore it...\n"
" or verify that your path to save is correct."
msgstr ""

#: ../../standalone/drakbackup_.c:2499
msgid ""
"Error durind sendmail\n"
"  your report mail was not sent\n"
"  Please configure sendmail"
msgstr ""

#: ../../standalone/drakbackup_.c:2522
#, fuzzy
msgid "Package List to Install"
msgstr "Velg pakker for installering"

#: ../../standalone/drakbackup_.c:2550
msgid ""
"Error durind sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""

#: ../../standalone/drakbackup_.c:2573
#, fuzzy
msgid "Please select data to restore..."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../standalone/drakbackup_.c:2594
#, fuzzy
msgid "Please select media for backup..."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../standalone/drakbackup_.c:2616
#, fuzzy
msgid "Please select data to backup..."
msgstr "Vennligst velg spr�k som skal brukes."

#: ../../standalone/drakbackup_.c:2638
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: ../../standalone/drakbackup_.c:2659
msgid "Under Devel ... please wait."
msgstr ""

#: ../../standalone/drakbackup_.c:2739
#, fuzzy
msgid "Backup system files"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:2741
#, fuzzy
msgid "Backup user files"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:2743
#, fuzzy
msgid "Backup other files"
msgstr "D�rlig sikkerhetskopi-fil"

#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
msgid "Total Progress"
msgstr ""

#: ../../standalone/drakbackup_.c:2767
msgid "files sending by FTP"
msgstr ""

#: ../../standalone/drakbackup_.c:2771
#, fuzzy
msgid "Sending files..."
msgstr "Finner enheter..."

#: ../../standalone/drakbackup_.c:2841
msgid "Data list to include on CDROM."
msgstr ""

#: ../../standalone/drakbackup_.c:2899
#, fuzzy
msgid "Please enter the cd writer speed"
msgstr "Vennligst test musen."

#: ../../standalone/drakbackup_.c:2917
msgid "Please enter your CD Writer device name (ex: 0,1,0)"
msgstr ""

#: ../../standalone/drakbackup_.c:2923
#, fuzzy
msgid "Please check if you want to include install boot on your CD."
msgstr "Vennligst velg pakkene du �nsker � installere."

#: ../../standalone/drakbackup_.c:2989
#, fuzzy
msgid "Backup Now from configuration file"
msgstr "Nettverkskonfigurasjon"

#: ../../standalone/drakbackup_.c:2999
#, fuzzy
msgid "View Backup Configuration."
msgstr "Nettverkskonfigurasjon"

#: ../../standalone/drakbackup_.c:3020
#, fuzzy
msgid "Wizard Configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/drakbackup_.c:3024
#, fuzzy
msgid "Advanced Configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/drakbackup_.c:3028
#, fuzzy
msgid "Backup Now"
msgstr "Oppsett filsystemer"

#: ../../standalone/drakbackup_.c:3053
msgid "Drakbackup"
msgstr ""

#: ../../standalone/drakbackup_.c:3104
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time ( about 1000% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         /*> cat .backupignore*/\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3134
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3142
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3181
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used ,because with incremental \n"
"backups it is necesarry to restore one by one each older backups.\n"
"\n"
"So if you don't like to restore an user please unselect all his\n"
"check box.\n"
"\n"
"Otherwise, you are able to select only one of this\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerfull \n"
"\toption to use backup, this option allow you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed after.\n"
"\tSo you will be able during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this options all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
msgid ""
" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
msgstr ""

#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
msgid ""
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: ../../standalone/drakbackup_.c:3223
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3261
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3270
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:3298
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, Drakbackup will remove\n"
"  your original directory and verify that all\n"
"  backup files are not corrupted. It is recommended\n"
"  you do a last backup before restoring.\n"
" \n"
"\n"
msgstr ""

#: ../../standalone/drakboot_.c:57
msgid "Installation of LILO failed. The following error occured:"
msgstr "Installasjon av LILO mislykket. F�lgende feil oppsto:"

#: ../../standalone/drakfont_.c:229
msgid "Search installed fonts"
msgstr ""

#: ../../standalone/drakfont_.c:231
msgid "Unselect fonts installed"
msgstr ""

#: ../../standalone/drakfont_.c:252
msgid "parse all fonts"
msgstr ""

#: ../../standalone/drakfont_.c:253
#, fuzzy
msgid "no fonts found"
msgstr "ingen nettverkskort funnet"

#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
#, fuzzy
msgid "done"
msgstr "Ferdig"

#: ../../standalone/drakfont_.c:265
msgid "could not find any font in your mounted partitions"
msgstr ""

#: ../../standalone/drakfont_.c:301
msgid "Reselect correct fonts"
msgstr ""

#: ../../standalone/drakfont_.c:304
msgid "could not find any font.\n"
msgstr ""

#: ../../standalone/drakfont_.c:327
msgid "Search fonts in installed list"
msgstr ""

#: ../../standalone/drakfont_.c:350
#, fuzzy
msgid "Fonts copy"
msgstr "Formater diskett"

#: ../../standalone/drakfont_.c:353
#, fuzzy
msgid "True Type fonts installation"
msgstr "Forbereder installasjon"

#: ../../standalone/drakfont_.c:357
msgid "please wait during ttmkfdir..."
msgstr ""

#: ../../standalone/drakfont_.c:359
msgid "True Type install done"
msgstr ""

#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
msgid "Fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
#: ../../standalone/drakfont_.c:406
msgid "type1inst building"
msgstr ""

#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
msgid "Ghostscript referencing"
msgstr ""

#: ../../standalone/drakfont_.c:397
msgid "ttf fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:401
msgid "pfm fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:411
msgid "Suppress temporary Files"
msgstr ""

#: ../../standalone/drakfont_.c:414
msgid "Restart XFS"
msgstr ""

#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
msgid "Suppress Fonts Files"
msgstr ""

#: ../../standalone/drakfont_.c:465
#, fuzzy
msgid "xfs restart"
msgstr "begrense"

#: ../../standalone/drakfont_.c:472
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts using the normal way. In rare cases, bogus fonts "
"may hang up your X Server."
msgstr ""

#: ../../standalone/drakfont_.c:547
#, fuzzy
msgid "Fonts Importation"
msgstr "Formater partisjoner"

#: ../../standalone/drakfont_.c:565
msgid "Get Windows Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:567
#, fuzzy
msgid "Advanced Options"
msgstr "LAN-konfigurasjon"

#: ../../standalone/drakfont_.c:569
msgid "Uninstall Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:571
#, fuzzy
msgid "Font List"
msgstr "Monteringspunkt"

#: ../../standalone/drakfont_.c:576
#, fuzzy
msgid "About"
msgstr "Avbryt"

#: ../../standalone/drakfont_.c:578
msgid "             Help           "
msgstr ""

#: ../../standalone/drakfont_.c:722
#, fuzzy
msgid "Choose the applications that will support the fonts :"
msgstr "Velg partisjonene du �nsker � partisjonere"

#: ../../standalone/drakfont_.c:726
msgid "Ghostscript"
msgstr ""

#: ../../standalone/drakfont_.c:730
#, fuzzy
msgid "StarOffice"
msgstr "Office"

#: ../../standalone/drakfont_.c:734
#, fuzzy
msgid "Abiword"
msgstr "Avbryt"

#: ../../standalone/drakfont_.c:738
#, fuzzy
msgid "Generic Printers"
msgstr "Skriver"

#: ../../standalone/drakfont_.c:775
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: ../../standalone/drakfont_.c:811
#, fuzzy
msgid "Install List"
msgstr "Installer systemet"

#: ../../standalone/drakfont_.c:841
msgid "click here if you are sure."
msgstr ""

#: ../../standalone/drakfont_.c:843
msgid "here if no."
msgstr ""

#: ../../standalone/drakfont_.c:880
msgid "Unselected All"
msgstr ""

#: ../../standalone/drakfont_.c:882
#, fuzzy
msgid "Selected All"
msgstr "Velg fil"

#: ../../standalone/drakfont_.c:884
#, fuzzy
msgid "Remove List"
msgstr "Fjern skriver"

#: ../../standalone/drakfont_.c:902 ../../standalone/drakfont_.c:922
#, fuzzy
msgid "Initials tests"
msgstr "Initmelding"

#: ../../standalone/drakfont_.c:903
#, fuzzy
msgid "Copy fonts on your system"
msgstr "Ikke noe nettverksadapter i systemet ditt!"

#: ../../standalone/drakfont_.c:904
msgid "Install & convert Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:905
#, fuzzy
msgid "Post Install"
msgstr "Installer"

#: ../../standalone/drakfont_.c:923
#, fuzzy
msgid "Remove fonts on your system"
msgstr "Ikke noe nettverksadapter i systemet ditt!"

#: ../../standalone/drakfont_.c:924
#, fuzzy
msgid "Post Uninstall"
msgstr "Avslutt installering"

#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:191
msgid "Internet Connection Sharing"
msgstr "Deling av Internett tilkobling"

#: ../../standalone/drakgw_.c:129
msgid "Internet Connection Sharing currently enabled"
msgstr "Deling av Internett tilkobling er sl�tt p�"

#: ../../standalone/drakgw_.c:130
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
"Dette er for �yeblikket sl�tt p�.\n"
"\n"
"Hva vil du gj�re?"

#: ../../standalone/drakgw_.c:134
msgid "disable"
msgstr "sl� av"

#: ../../standalone/drakgw_.c:134 ../../standalone/drakgw_.c:159
msgid "dismiss"
msgstr "avvis"

#: ../../standalone/drakgw_.c:134 ../../standalone/drakgw_.c:159
msgid "reconfigure"
msgstr "Konfigurer p� nytt"

#: ../../standalone/drakgw_.c:137
msgid "Disabling servers..."
msgstr "Sl�r av tjenere..."

#: ../../standalone/drakgw_.c:145
msgid "Internet connection sharing is now disabled."
msgstr "Deling av Internett tilkobling er sl�tt av"

#: ../../standalone/drakgw_.c:154
msgid "Internet Connection Sharing currently disabled"
msgstr "Deling av Internett tilkobling er sl�tt av"

#: ../../standalone/drakgw_.c:155
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Oppsett av deling av Internett tilkobling har allerede blitt gjort.\n"
"Dette er for �yeblikket sl�tt av.\n"
"\n"
"Hva vil du gj�re?"

#: ../../standalone/drakgw_.c:159
msgid "enable"
msgstr "sl� p�"

#: ../../standalone/drakgw_.c:166
msgid "Enabling servers..."
msgstr "Sl�r p� tjenere..."

#: ../../standalone/drakgw_.c:171
msgid "Internet connection sharing is now enabled."
msgstr "Deling av Internett tilkobling er n� sl�tt p�."

#: ../../standalone/drakgw_.c:192
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Du er i ferd med � konfigurere maskinen din til � dele Internett-"
"tilkobling.\n"
"Andre maskiner i nettverket ditt vil da kunne bruke denne maskinens "
"Internett tilkobling.\n"
"\n"
"Merk: du trenger et dedikert nettverksadapter for � sette opp et lokalt "
"nettverk (LAN)."

#: ../../standalone/drakgw_.c:218
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Grensesnitt %s (bruker modul %s)"

#: ../../standalone/drakgw_.c:219
#, c-format
msgid "Interface %s"
msgstr "Grensesnitt %s"

#: ../../standalone/drakgw_.c:227
msgid "No network adapter on your system!"
msgstr "Ikke noe nettverksadapter i systemet ditt!"

#: ../../standalone/drakgw_.c:228
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Ikke noe ethernet nettverksadapter har blitt oppdaget i systemet ditt. "
"Vennligst kj�r verkt�yet for maskinvarekonfigurasjon."

#: ../../standalone/drakgw_.c:234
msgid "Network interface"
msgstr "Nettverksgrensesnitt"

#: ../../standalone/drakgw_.c:235
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Det er bare ett konfigurert nettverksadapter i systemet ditt:\n"
"\n"
"%s\n"
"\n"
"Jeg er i ferd med � sette opp ditt lokale nettverk (LAN) med dette adapteret."

#: ../../standalone/drakgw_.c:244
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Vennligst velg hvilket nettverksadapter som skal kobles til ditt lokale "
"nettverk (LAN)."

#: ../../standalone/drakgw_.c:262
#, fuzzy
msgid "Network interface already configured"
msgstr "Monitor er ikke konfigurert"

#: ../../standalone/drakgw_.c:263
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: ../../standalone/drakgw_.c:268
#, fuzzy
msgid "Automatic reconfiguration"
msgstr "Konfigurasjon av automatiske skritt"

#: ../../standalone/drakgw_.c:269
#, fuzzy
msgid "Show current interface configuration"
msgstr "Modifiser skriverkonfigurasjon"

#: ../../standalone/drakgw_.c:271
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""

#: ../../standalone/drakgw_.c:283
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the C-Class Network that "
"you use for your local network; I will not reconfigure it and I will not "
"touch your DHCP server configuration.\n"
"\n"
"Else, I can reconfigure your interface and (re)configure a DHCP server for "
"you.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw_.c:288
msgid "C-Class Local Network"
msgstr ""

#: ../../standalone/drakgw_.c:289
#, fuzzy
msgid "(This) DHCP Server IP"
msgstr "CUPS tjener IP"

#: ../../standalone/drakgw_.c:290
msgid "Re-configure interface and DHCP server"
msgstr ""

#: ../../standalone/drakgw_.c:297
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: ../../standalone/drakgw_.c:308
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Mulig LAN-adresse konflikt funnet i konfigurasjonen til %s!\n"

#: ../../standalone/drakgw_.c:316 ../../standalone/drakgw_.c:322
msgid "Firewalling configuration detected!"
msgstr "Brannmurkonfigurasjon oppdaget!"

#: ../../standalone/drakgw_.c:317 ../../standalone/drakgw_.c:323
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Advarsel! En eksisterende brannmurkonfigurasjon har blitt oppdaget. Du "
"trenger muligens � konfigurere noe manuelt etter installasjon."

#: ../../standalone/drakgw_.c:331
msgid "Configuring..."
msgstr "Konfigurerer..."

#: ../../standalone/drakgw_.c:332
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurerer script, installerer programvare, starter tjenere..."

#: ../../standalone/drakgw_.c:369
#, c-format
msgid "Problems installing package %s"
msgstr "Problemer ved installering av pakke %s"

#: ../../standalone/drakgw_.c:663
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Alt har blitt konfigurert.\n"
"Du kan n� dele Internett-tilkobling med andre maskiner p� ditt lokale "
"nettverk ved � bruke automatisk nettverkskonfigurasjon (DHCP)."

#: ../../standalone/drakgw_.c:680
msgid "The setup has already been done, but it's currently disabled."
msgstr "Oppsett har allerede blitt gjort, men er for �yeblikket sl�tt av."

#: ../../standalone/drakgw_.c:681
msgid "The setup has already been done, and it's currently enabled."
msgstr "Oppsett har allerede blitt gjort, og er for �yeblikket sl�tt p�."

#: ../../standalone/drakgw_.c:682
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Deling av Internett tilkobling har aldri blitt konfigurert."

#: ../../standalone/drakgw_.c:687
msgid "Internet connection sharing configuration"
msgstr "Internett deling av tilkobling konfigurasjon"

#: ../../standalone/drakgw_.c:694
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Velkommen til verkt�yet for deling av Internett tilkobling!\n"
"\n"
"%s\n"
"\n"
"Klikk p� Konfigurer for � starte oppsett-hjelperen."

#: ../../standalone/draknet_.c:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Nettverkskonfigurasjon (%d adaptere"

#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:594
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/draknet_.c:95
msgid "Del profile..."
msgstr "Slett profil..."

#: ../../standalone/draknet_.c:101
msgid "Profile to delete:"
msgstr "Profil som skal slettes:"

#: ../../standalone/draknet_.c:129
msgid "New profile..."
msgstr "Ny profil...."

#: ../../standalone/draknet_.c:135
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/draknet_.c:161
msgid "Hostname: "
msgstr "Vertsnavn: "

#: ../../standalone/draknet_.c:168
msgid "Internet access"
msgstr "Internett-tilgang"

#: ../../standalone/draknet_.c:181
msgid "Type:"
msgstr "Type:"

#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:375
msgid "Gateway:"
msgstr "Gateway:"

#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:375
msgid "Interface:"
msgstr "Grensesnitt:"

#: ../../standalone/draknet_.c:195
msgid "Status:"
msgstr "Status:"

#: ../../standalone/draknet_.c:202
msgid "Wait please"
msgstr ""

#: ../../standalone/draknet_.c:220
msgid "Configure Internet Access..."
msgstr "Konfigurer internetttilgang...."

#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:448
msgid "LAN configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/draknet_.c:232
msgid "Driver"
msgstr "Driver"

#: ../../standalone/draknet_.c:232
msgid "Interface"
msgstr "rensesnitt"

#: ../../standalone/draknet_.c:232
msgid "Protocol"
msgstr "Protokoll"

#: ../../standalone/draknet_.c:232
msgid "State"
msgstr "Status"

#: ../../standalone/draknet_.c:244
msgid "Configure Local Area Network..."
msgstr "Konfigurer lokalt nettverk"

#: ../../standalone/draknet_.c:256
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/draknet_.c:257
msgid "Wizard..."
msgstr "Wizard..."

#: ../../standalone/draknet_.c:283
msgid "Apply"
msgstr "Bruk"

#: ../../standalone/draknet_.c:302
msgid "Please Wait... Applying the configuration"
msgstr "Vennligst vent . . . Setter konfigurasjonen p� plass"

#: ../../standalone/draknet_.c:383 ../../standalone/draknet_.c:406
msgid "Connected"
msgstr "Tilkoblet"

#: ../../standalone/draknet_.c:383 ../../standalone/draknet_.c:406
msgid "Not connected"
msgstr "Ikke tilkoblet"

#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
msgid "Connect..."
msgstr "Koble til..."

#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
msgid "Disconnect..."
msgstr "Koble fra..."

#: ../../standalone/draknet_.c:403
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""

#: ../../standalone/draknet_.c:430
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Du har ingen konfigurerte grensesnitt.\n"
"Konfigurer disse f�rst ved � klikke p� 'Konfigurer'"

#: ../../standalone/draknet_.c:452
msgid "LAN Configuration"
msgstr "LAN-konfigurasjon"

#: ../../standalone/draknet_.c:463
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/draknet_.c:469
msgid "Boot Protocol"
msgstr "Oppstartsprotokoll"

#: ../../standalone/draknet_.c:470
msgid "Started on boot"
msgstr "Startet ved oppstart"

#: ../../standalone/draknet_.c:471
msgid "DHCP client"
msgstr "DHCP-klient"

#: ../../standalone/draknet_.c:496 ../../standalone/draknet_.c:499
msgid "activate now"
msgstr "aktiver n�"

#: ../../standalone/draknet_.c:496 ../../standalone/draknet_.c:499
msgid "deactivate now"
msgstr "deaktiver n�"

#: ../../standalone/draknet_.c:502
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""

#: ../../standalone/draknet_.c:559
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Du har ingen internett-tilkobling.\n"
"Opprett en f�rst ved � klikke p� 'Konfigurer'"

#: ../../standalone/draknet_.c:583
msgid "Internet connection configuration"
msgstr "Internett tilkobling konfigurasjon"

#: ../../standalone/draknet_.c:587
msgid "Internet Connection Configuration"
msgstr "Internett tilkobling konfigurasjon"

#: ../../standalone/draknet_.c:596
msgid "Connection type: "
msgstr "Oppkoblingstype:"

#: ../../standalone/draknet_.c:602
msgid "Parameters"
msgstr "Parametere"

#: ../../standalone/draknet_.c:620
msgid "Gateway"
msgstr "Gateway"

#: ../../standalone/draknet_.c:629
msgid "Ethernet Card"
msgstr "Ethernettkort"

#: ../../standalone/draknet_.c:630
msgid "DHCP Client"
msgstr "DHCP-klient"

#: ../../standalone/draksec_.c:31
msgid "Setting security level"
msgstr "Setter sikkerhetsniv�"

#: ../../standalone/drakxconf_.c:47
msgid "Control Center"
msgstr "Kontrollpanel"

#: ../../standalone/drakxconf_.c:48
msgid "Choose the tool you want to use"
msgstr "Velg verkt�yet du �nsker � bruke"

#: ../../standalone/drakxtv_.c:39
#, fuzzy
msgid "Canada (cable)"
msgstr "Canadisk (Quebec)"

#: ../../standalone/drakxtv_.c:39
msgid "USA (bcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:39
msgid "USA (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:39
msgid "USA (cable-hrc)"
msgstr ""

#: ../../standalone/drakxtv_.c:40
msgid "China (bcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:40
msgid "Japan (bcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:40
msgid "Japan (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:41
msgid "East Europe"
msgstr ""

#: ../../standalone/drakxtv_.c:41
#, fuzzy
msgid "Ireland"
msgstr "Islansk"

#: ../../standalone/drakxtv_.c:41
msgid "West Europe"
msgstr ""

#: ../../standalone/drakxtv_.c:42
#, fuzzy
msgid "Australia"
msgstr "�sterrike"

#: ../../standalone/drakxtv_.c:42
#, fuzzy
msgid "Newzealand"
msgstr "Netherlands"

#: ../../standalone/drakxtv_.c:43
msgid "South Africa"
msgstr ""

#: ../../standalone/drakxtv_.c:44
msgid "Argentina"
msgstr ""

#: ../../standalone/drakxtv_.c:49
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: ../../standalone/drakxtv_.c:51
msgid "TV norm :"
msgstr ""

#: ../../standalone/drakxtv_.c:52
msgid "Area :"
msgstr ""

#: ../../standalone/drakxtv_.c:56
msgid "Scanning for TV channels in progress ..."
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "Scanning for TV channels"
msgstr ""

#: ../../standalone/keyboarddrake_.c:16
msgid "usage: keyboarddrake [--expert] [keyboard]\n"
msgstr "bruk: keyboarddrake [--expert] [tastatur]\n"

#: ../../standalone/keyboarddrake_.c:29
msgid "Please, choose your keyboard layout."
msgstr "Vennligst velg tastatur-oppsettet ditt."

#: ../../standalone/keyboarddrake_.c:36
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "�nsker du at BackSpace skal returnere Delete i konsoll?"

#: ../../standalone/livedrake_.c:24
msgid "Change Cd-Rom"
msgstr "Bytt CD"

#: ../../standalone/livedrake_.c:25
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Vennligst sett inn installasjons-CD'en i stasjonen og trykk Ok n�r du er\n"
"ferdig. Hvis du ikke har denne, trykk Avbryt for � unng� oppgradering."

#: ../../standalone/livedrake_.c:35
msgid "Unable to start live upgrade !!!\n"
msgstr "Kan ikke starte oppgradering !!!\n"

#: ../../standalone/localedrake_.c:33
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:487
msgid "logdrake"
msgstr "logdrake"

#: ../../standalone/logdrake_.c:95
#, fuzzy
msgid "Show only for the selected day"
msgstr "Vis kun for denne dag"

#: ../../standalone/logdrake_.c:102
msgid "/File/_New"
msgstr "/Fil/_Ny"

#: ../../standalone/logdrake_.c:102
msgid "<control>N"
msgstr "<control>N"

#: ../../standalone/logdrake_.c:103
msgid "/File/_Open"
msgstr "/Fil/_�pne"

#: ../../standalone/logdrake_.c:103
msgid "<control>O"
msgstr "<control>�"

#: ../../standalone/logdrake_.c:104
msgid "/File/_Save"
msgstr "/Fil/_Lagre"

#: ../../standalone/logdrake_.c:104
msgid "<control>S"
msgstr "<control>L"

#: ../../standalone/logdrake_.c:105
msgid "/File/Save _As"
msgstr "/Fil/Lagre _Som"

#: ../../standalone/logdrake_.c:106
msgid "/File/-"
msgstr "/Fil/-"

#: ../../standalone/logdrake_.c:108
msgid "/_Options"
msgstr "/_Valg"

#: ../../standalone/logdrake_.c:109
msgid "/Options/Test"
msgstr "/Valg/Test"

#: ../../standalone/logdrake_.c:110
msgid "/_Help"
msgstr "/_Hjelp"

#: ../../standalone/logdrake_.c:111
msgid "/Help/_About..."
msgstr "/Hjelp/_Om..."

#: ../../standalone/logdrake_.c:118
msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"

#: ../../standalone/logdrake_.c:119
msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"

#: ../../standalone/logdrake_.c:173
#, fuzzy
msgid "User"
msgstr "Brukernavn"

#: ../../standalone/logdrake_.c:174
#, fuzzy
msgid "Messages"
msgstr "meldinger"

#: ../../standalone/logdrake_.c:175
#, fuzzy
msgid "Syslog"
msgstr "syslog"

#: ../../standalone/logdrake_.c:176
msgid "Mandrake Tools Explanations"
msgstr ""

#: ../../standalone/logdrake_.c:179
msgid "search"
msgstr "s�k"

#: ../../standalone/logdrake_.c:185
msgid "A tool to monitor your logs"
msgstr "Ett verkt�y for � sjekke loggene dine"

#: ../../standalone/logdrake_.c:186
msgid "Settings"
msgstr "Instillinger"

#: ../../standalone/logdrake_.c:191
msgid "matching"
msgstr "lik"

#: ../../standalone/logdrake_.c:192
msgid "but not matching"
msgstr "men ikke lik"

#: ../../standalone/logdrake_.c:196
msgid "Choose file"
msgstr "Velg fil"

#: ../../standalone/logdrake_.c:201
msgid "Calendar"
msgstr "Kalender"

#: ../../standalone/logdrake_.c:211
msgid "Content of the file"
msgstr "Innholdet i filen"

#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:381
msgid "Mail/SMS alert"
msgstr ""

#: ../../standalone/logdrake_.c:260
#, c-format
msgid "please wait, parsing file: %s"
msgstr "vennligst vent, gjennomg�r %s"

#: ../../standalone/logdrake_.c:396
#, fuzzy
msgid "Mail/SMS alert configuration"
msgstr "Lilo/Grub konfigurasjon"

#: ../../standalone/logdrake_.c:397
#, fuzzy
msgid ""
"Welcome to the mail/SMS configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Velkommen til proxy-konfigurasjonsverkt�yet.\n"
"\n"
"Her kan du sette opp dine http og ftp proxier\n"
"med eller uten brukernavn og passord\n"

#: ../../standalone/logdrake_.c:405
#, fuzzy
msgid "proftpd"
msgstr "Apache og Pro-ftpd"

#: ../../standalone/logdrake_.c:408
msgid "sshd"
msgstr ""

#: ../../standalone/logdrake_.c:409
msgid "webmin"
msgstr ""

#: ../../standalone/logdrake_.c:410
#, fuzzy
msgid "xinetd"
msgstr "Avslutt"

#: ../../standalone/logdrake_.c:413
#, fuzzy
msgid "service setting"
msgstr "Tjener"

#: ../../standalone/logdrake_.c:414
msgid ""
"You will receive an alert if one of the selected service is no more running"
msgstr ""

#: ../../standalone/logdrake_.c:424
#, fuzzy
msgid "load setting"
msgstr "Formatering"

#: ../../standalone/logdrake_.c:425
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: ../../standalone/logdrake_.c:436
#, fuzzy
msgid "alert configuration"
msgstr "Internett-konfigurasjon"

#: ../../standalone/logdrake_.c:437
msgid "Configure the way the system will alert you"
msgstr ""

#: ../../standalone/logdrake_.c:464
msgid "Save as.."
msgstr "Lagre Som..."

#: ../../standalone/mousedrake_.c:49
msgid "Please, choose the type of your mouse."
msgstr "Vennligst velg din musetype."

#: ../../standalone/mousedrake_.c:59
msgid "no serial_usb found\n"
msgstr "ingen serie_usb funnet\n"

#: ../../standalone/mousedrake_.c:63
msgid "Emulate third button?"
msgstr "Emulere tredje knapp?"

#: ../../standalone/scannerdrake_.c:53
#, c-format
msgid "%s found on %s, configure it ?"
msgstr ""

#: ../../standalone/scannerdrake_.c:60
#, fuzzy
msgid "Select a scanner"
msgstr "Velg et grafikk-kort"

#: ../../standalone/scannerdrake_.c:82
#, c-format
msgid "This %s scanner is unsupported"
msgstr ""

#: ../../standalone/scannerdrake_.c:94
#, c-format
msgid ""
"This %s scanner must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""

#: ../../standalone/tinyfirewall_.c:31
msgid "Firewalling Configuration"
msgstr "Brannmurkonfigurasjon"

#: ../../standalone/tinyfirewall_.c:44
msgid "Firewalling configuration"
msgstr "Brannmurkonfigurasjon"

#: ../../standalone/tinyfirewall_.c:79
msgid ""
"Firewalling\n"
"\n"
"You already have set up a firewall.\n"
"Click on Configure to change or remove the firewall"
msgstr ""
"Brannmur\n"
"\n"
"Du har allerede satt opp en brannmur.\n"
"Klikk p� Konfigurer for � endre eller fjerne brannmuren"

#: ../../standalone/tinyfirewall_.c:83
msgid ""
"Firewalling\n"
"\n"
"Click on Configure to set up a standard firewall"
msgstr ""
"Brannmur\n"
"\n"
"Klikk p� Konfigurer for � sette opp en standard brannmur"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "Velg spr�k"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "Velg installasjonsklasse"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "Oppdaging av harddisk"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Konfigurer mus"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "Velg tastatur"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "Sikkerhet"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "Oppsett filsystemer"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Formater partisjoner"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "Velg pakker for installering"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "Installer systemet"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Legg til en bruker"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "Konfigurer nettverk"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Konfigurer tjenester"

#: ../../steps.pm_.c:29
msgid "Install bootloader"
msgstr "Installer oppstartslaster"

#: ../../steps.pm_.c:31
msgid "Create a bootdisk"
msgstr "Opprett en oppstartdiskett"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Konfigurer X"

#: ../../steps.pm_.c:34
#, fuzzy
msgid "Install system updates"
msgstr "Installer systemet"

#: ../../steps.pm_.c:35
msgid "Exit install"
msgstr "Avslutt installering"

#: ../../tinyfirewall.pm_.c:9
msgid ""
"tinyfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"tinyfirewall konfigurering\n"
"\n"
"Dette konfigurerer en personlig brannmur for denne Mandrake Linux maskinen.\n"
"For en kraftig dedikert brannmurl�sning ta en kikk p� den\n"
"spesialiserte MandrakeSecurity Firewall distribusjonen."

#: ../../tinyfirewall.pm_.c:14
msgid ""
"We'll now ask you questions about which services you'd like to allow\n"
"the Internet to connect to.  Please think carefully about these\n"
"questions, as your computer's security is important.\n"
"\n"
"Please, if you're not currently using one of these services, firewall\n"
"it off.  You can change this configuration anytime you like by\n"
"re-running this application!"
msgstr ""
"Vi vil n� stille deg sp�rsm�l om hvilke tjenester du vil tillate\n"
"Internett � koble til. Tenk n�ye over disse sp�rsm�lene,\n"
"da sikkerheten til maskinen din er viktig.\n"
"\n"
"Hvis du ikke bruker noen av disse tjenestene for �yeblikket, skru\n"
"av brannmur. Du kan endre denne konfigurasjonen n�r du vil ved �\n"
"kj�re denne applikasjonen p� nytt!"

#: ../../tinyfirewall.pm_.c:21
msgid ""
"Are you running a web server on this machine that you need the whole\n"
"Internet to see? If you are running a webserver that only needs to be\n"
"accessed by this machine, you can safely answer NO here.\n"
"\n"
msgstr ""
"Kj�rer du en web-tjener p� denne maskinen som hele hele Internett trenger\n"
"� se? Hvis du kj�rer en web-tjener som kun trenger tilgang fra denne "
"maskinen\n"
"kan du trygt svare NEI her.\n"
"\n"

#: ../../tinyfirewall.pm_.c:26
msgid ""
"Are you running a name server on this machine? If you didn't set one\n"
"up to give away IP and zone information to the whole Internet, please\n"
"answer no.\n"
"\n"
msgstr ""
"Kj�rer du en navnetjener p� denne maskinen? Hvis du ikke satte opp en\n"
"for � gi ut IP og soneinformasjon til hele Internett, vennligst svar nei.\n"
"\n"

#: ../../tinyfirewall.pm_.c:31
msgid ""
"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
"is a telnet-replacement that you might use to login. If you're using\n"
"telnet now, you should definitely switch to ssh. telnet is not\n"
"encrypted -- so some attackers can steal your password if you use\n"
"it. ssh is encrypted and doesn't allow for this eavesdropping."
msgstr ""
"�nsker du � tillate innkommende Secure Shell (ssh) tilkoblinger? Dette\n"
"er et alternativ til telnet som du kan bruke til innlogg. Hvis du bruker\n"
"telnet n� burde du definitivt bytte til ssh. telnet er ikke kryptert --\n"
"s� noen angripere kan stjele passordet ditt hvis du bruker det. ssh\n"
"er kryptert og tillater ikke dette."

#: ../../tinyfirewall.pm_.c:36
msgid ""
"Do you want to allow incoming telnet connections?\n"
"This is horribly unsafe, as we explained in the previous screen. We\n"
"strongly recommend answering No here and using ssh in place of\n"
"telnet.\n"
msgstr ""
"�nsker du � tillate innkommende telnet tilkoblinger?\n"
"Dette er forferdelig usikkert som vi forklarte i forrige skjermbilde. Vi\n"
"anbefaler p� det sterkeste � svare Nei her og bruke ssh i stedet for\n"
"telnet.\n"

#: ../../tinyfirewall.pm_.c:41
msgid ""
"Are you running an FTP server here that you need accessible to the\n"
"Internet? If you are, we strongly recommend that you only use it for\n"
"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
"attackers, since FTP also uses no encryption for transferring passwords.\n"
msgstr ""
"Kj�rer du en FTP-tjener her som du trenger � ha tilgjengelig p�\n"
"Internett? I s�fall anbefaler vi p� det sterkeste at du kun bruker\n"
"den til anonyme overf�ringer. Passord sendt med FTP kan stjeles av\n"
"angripere, siden FTP heller ikke bruker kryptering for � overf�re passord.\n"

#: ../../tinyfirewall.pm_.c:46
msgid ""
"Are you running a mail server here? If you're sending you \n"
"messages through pine, mutt or any other text-based mail client,\n"
"you probably are.  Otherwise, you should firewall this off.\n"
"\n"
msgstr ""
"Kj�rer du en epost-tjener her? Hvis du sender beskjeder via \n"
"pine, mutt eller andre tekstbaserte epost-klienter gj�r du\n"
"antageligvis det. Eller skal du sl� av dette.\n"
"\n"

#: ../../tinyfirewall.pm_.c:51
msgid ""
"Are you running a POP or IMAP server here? This would\n"
"be used to host non-web-based mail accounts for people via \n"
"this machine.\n"
"\n"
msgstr ""
"Kj�rer du en POP- eller IMAP-tjener her? Denne vil bli\n"
"brukt som vert for ikke-web-baserte epost-kontoer via \n"
"denne maskinen.\n"
"\n"

#: ../../tinyfirewall.pm_.c:56
msgid ""
"You appear to be running a 2.2 kernel.  If your network IP\n"
"is automatically set by a computer in your home or office \n"
"(dynamically assigned), we need to allow for this.  Is\n"
"this the case?\n"
msgstr ""
"Det ser ut til at du kj�rer en 2.2 kjerne. Hvis nettverks-IP'en\n"
"din er automatisk satt av en maskin hjemme eller p� kontoret \n"
"(dynamisk tildelt), trenger vi � tillate dette.. Er dette\n"
"tilfelle?\n"

#: ../../tinyfirewall.pm_.c:61
msgid ""
"Is your computer getting time syncronized to another computer?\n"
"Mostly, this is used by medium-large Unix/Linux organizations\n"
"to synchronize time for logging and such.  If you're not part\n"
"of a larger office and haven't heard of this, you probably \n"
"aren't."
msgstr ""
"Mottar maskinen din tid synkronisert til en annen maskin?\n"
"For det meste er dette brukt av medium-store /Unix/Linux\n"
"organisasjoner for � synkronisere tid for ting som logging. Hvis\n"
"du ikke er en del av et st�rre kontor og ikke har h�rt om dette\n"
"gj�r du antageligvis ikke."

#: ../../tinyfirewall.pm_.c:66
msgid ""
"Configuration complete.  May we write these changes to disk?\n"
"\n"
"\n"
"\n"
msgstr ""
"Konfigurasjon ferdig. Skal vi skrive endringene til disk?\n"
"\n"
"\n"
"\n"

#: ../../tinyfirewall.pm_.c:82
#, c-format
msgid "Can't open %s: %s\n"
msgstr "Kan ikke �pne %s: %s\n"

#: ../../tinyfirewall.pm_.c:84
#, c-format
msgid "Can't open %s for writing: %s\n"
msgstr "Kan ikke �pne %s for skriving: %s\n"

#: ../../tinyfirewall.pm_.c:180
msgid "No I don't need DHCP"
msgstr ""

#: ../../tinyfirewall.pm_.c:180
msgid "Yes I need DHCP"
msgstr ""

#: ../../tinyfirewall.pm_.c:181
msgid "No I don't need NTP"
msgstr ""

#: ../../tinyfirewall.pm_.c:181
msgid "Yes I need NTP"
msgstr ""

#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
msgid "Don't Save"
msgstr ""

#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
#: ../../tinyfirewall.pm_.c:206
msgid "Save & Quit"
msgstr ""

#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
#, fuzzy
msgid "Firewall Configuration Wizard"
msgstr "Brannmurkonfigurasjon"

#: ../../tinyfirewall.pm_.c:199
msgid "No (firewall this off from the internet)"
msgstr ""

#: ../../tinyfirewall.pm_.c:200
msgid "Yes (allow this through the firewall)"
msgstr ""

#: ../../tinyfirewall.pm_.c:232
#, fuzzy
msgid "Please Wait... Verifying installed packages"
msgstr "Vennligst vent, forbereder installasjon"

#: ../../tinyfirewall.pm_.c:238
#, c-format
msgid ""
"Failure installing the needed packages : %s and Bastille.\n"
" Try to install them manually."
msgstr ""

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Web/FTP"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Nettverksmaskin (klient)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-tjener, SMB-tjener, Proxy-tjener, SSH-tjener"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Office"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome arbeidstasjon"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Verkt�y for din Palm Pilot eller din Visor"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Arbeidstasjon"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Server, Brannmur/ruter"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Tjener for domenenavn og nettverksinformasjon"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Kontorprogrammer: tekstbehandlere (kword, abiword), regneark (kspread, "
"gnumeric), pdf fremvisere etc"

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Lydrelaterte verkt�y: mp3 eller midi-spillere, miksere etc."

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "B�ker og howto's om Linux og fri programvare"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE arbeidstasjon"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm etc"

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimedia - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Sett med verkt�y for e-post, nyheter, web, filoverf�ring og chat"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Database"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL eller MySQL database tjener"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Verkt�y for � forenkle konfigurasjonen p� maskinen din"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimedia - Lyd"

#: ../../share/compssUsers:999
msgid "Utilities"
msgstr "Verkt�y"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentasjon"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konsollverkt�y"

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr "Postfix posttjener, Inn nyhetstjener"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internettstasjon"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimediastasjon"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "LAN-konfigurasjon"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Mere grafiske skrivebord (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop Environment, basis grafikkmilj� med en samling av passende verkt�y"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Grafisk milj�"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache og Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "Verkt�y for � opprette og brenne CD'er"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Kontor og arbeidsmaskin"

#: ../../share/compssUsers:999
msgid "Server"
msgstr "Tjener"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm etc"

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Grafiske programmer s� som Gimp"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C og C++ utviklingsbibliotek, programmer og include filer"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Nettverk datamaskintjener"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr "Server, Mail/Gruppevare/News"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spillstasjon"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Videospillere og redigerere"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimedia - Grafikk"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Underholdningsprogrammer: arkade, bordspill, strategi etc"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Sett med verkt�y for � lese og sende e-post og nyheter (pine, mutt, tin...) "
"og for se p� webben"

#: ../../share/compssUsers:999
msgid "Archiving, emulators, monitoring"
msgstr "Arkivering, emulatorer, overv�kning"

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Personlig finans"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Et grafisk milj� med et brukervennlig sett med applikasjoner og skrivebords- "
"verkt�y"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klienter for forskjellige protokoller inkludert ssh"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internett-gateway"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Lyd og bilde avspilling/redigeringsprogrammer"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Andre grafiske skrivebord"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Redigerere, skall, filverkt�y, terminaler"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "Programmer for � h�ndtere dine finanser, s� som gnucash"

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Personling informasjonsh�ndtering"

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedia - CD-brenning"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Vitenskaplig arbeidsstasjon"

#~ msgid ""
#~ "Can't access kernel modules corresponding to your kernel (file %s is "
#~ "missing)"
#~ msgstr ""
#~ "Kan ikke f� tilgang til kjernemodulene som korresponderer med kjernen din"
#~ "(fil %s mangler)"

#~ msgid "$f-$g %s)"
#~ msgstr "$f-$g %s)"

#~ msgid "None"
#~ msgstr "Ingen"

#~ msgid "Choose a default printer!"
#~ msgstr "Velg en standard skriver!"

#~ msgid "Apply/Re-read printers"
#~ msgstr "Bruk/Oppfrisk skriverliste"

#~ msgid "You may now provide its options to module %s."
#~ msgstr "Du kan n� gi dens opsjoner til modul %s."

#~ msgid "Low"
#~ msgstr "Lav"

#~ msgid "Medium"
#~ msgstr "Medium"

#~ msgid ""
#~ "Few improvements for this security level, the main one is that there are\n"
#~ "more security warnings and checks."
#~ msgstr ""
#~ "F� endringer for dette sikkerhetsniv�et, hovedforskjellen er at det er\n"
#~ "flere advarsler og kontroller."

#~ msgid "mount failed"
#~ msgstr "montering mislykket"

#~ msgid "Boot mode"
#~ msgstr "Oppstartsmodus"

#~ msgid "Export"
#~ msgstr "Eksporter"

#~ msgid "click here"
#~ msgstr "klikk her"

#~ msgid ""
#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
#~ "local time according to the time zone you selected."
#~ msgstr ""
#~ "GNU/Linux h�ndterer tid i GMT (Greenwich Mean Time)\n"
#~ "og oversetter denne til lokal tid ihht. den tidssonen du har valgt."

#~ msgid "Connect to Internet"
#~ msgstr "Koble opp mot Internett"

#~ msgid "Disconnect from Internet"
#~ msgstr "Koble ned fra Internett"

#~ msgid "Configure network connection (LAN or Internet)"
#~ msgstr "Konfigurer nettverk-tilkobling (LAN eller Internett)"

#, fuzzy
#~ msgid "Detected %s, do you want to set it up?"
#~ msgstr "Hvilken disk vil du flytte til?"

#, fuzzy
#~ msgid "Please choose the printer you want to set up."
#~ msgstr "Vennligst velg pakkene du �nsker � installere."

#, fuzzy
#~ msgid "Infos"
#~ msgstr "Info"

#, fuzzy
#~ msgid "Windows Importation"
#~ msgstr "Gnome arbeidstasjon"

#~ msgid "authentification"
#~ msgstr "autentisering"

#~ msgid "user"
#~ msgstr "bruker"