# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Terje Bjerkelia <terje@bjerkelia.com>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: panoramix VERSION\n"
"POT-Creation-Date: 1999-09-04 21:09+0200\n"
"PO-Revision-Date: 1999-08-25 11:07+0200\n"
"Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
"Language-Team: norwegian\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../Xconfigurator.pm_.c:157
msgid "Choose a graphic card"
msgstr "Velg et grafikk-kort"

#: ../Xconfigurator.pm_.c:179
msgid "Select the memory size of your graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:192
msgid "Choose a monitor"
msgstr "Velg en monitor"

#: ../Xconfigurator.pm_.c:224
#, fuzzy
msgid "Monitor not configured"
msgstr "Monitoren er ikke konfigurert ennå"

#: ../Xconfigurator.pm_.c:227
msgid "Graphic card not configured yet"
msgstr "Grafikk-kortet er ikke konfigurert ennå"

#: ../Xconfigurator.pm_.c:230
msgid "Resolutions not chosen yet"
msgstr "Oppløsninger er ikke valgt ennå"

#: ../Xconfigurator.pm_.c:237
#, fuzzy
msgid "Do you want to test the configuration?"
msgstr "Vil du teste konfigurasjonen?"

#: ../Xconfigurator.pm_.c:237
msgid "Test configuration"
msgstr "Test konfigurasjon"

#: ../Xconfigurator.pm_.c:269
#, c-format
msgid "(leaving in %d seconds)"
msgstr "(slutter om %d sekunder)"

#: ../Xconfigurator.pm_.c:273
msgid "Is this ok?"
msgstr "Er dette ok?"

#: ../Xconfigurator.pm_.c:281
msgid "An error occurred, try changing some parameters"
msgstr "En feil oppsto, prøv å endre noen parametere"

#: ../Xconfigurator.pm_.c:289 ../Xconfigurator.pm_.c:429
msgid "Automatic resolutions"
msgstr "Automatiske oppløsninger"

#: ../Xconfigurator.pm_.c:333 ../install_steps_graphical.pm_.c:597
#: ../install_steps_graphical.pm_.c:598 ../install_steps_interactive.pm_.c:297
#: ../install_steps_interactive.pm_.c:298
msgid "Resolution"
msgstr "Oppløsning"

#: ../Xconfigurator.pm_.c:364
msgid "Choose resolution and color depth"
msgstr "Velg oppløsning og fargedybde"

#: ../Xconfigurator.pm_.c:611
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-layout: %s\n"

#: ../Xconfigurator.pm_.c:612
#, c-format
msgid "Mouse type: %s\n"
msgstr "Type mus: %s\n"

#: ../Xconfigurator.pm_.c:613
#, c-format
msgid "Mouse device: %s\n"
msgstr "Enhet mus: %s\n"

#: ../Xconfigurator.pm_.c:614
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../Xconfigurator.pm_.c:615
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HorizSync: %s\n"

#: ../Xconfigurator.pm_.c:616
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertRefresh: %s\n"

#: ../Xconfigurator.pm_.c:617
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafikk-kort: %s\n"

#: ../Xconfigurator.pm_.c:618
#, c-format
msgid "Graphic memory: %s KB\n"
msgstr "Minne grafikk: %s KB\n"

#: ../Xconfigurator.pm_.c:619
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 tjener: %s\n"

#: ../Xconfigurator.pm_.c:644
msgid "Change Monitor"
msgstr "Endre monitor"

#: ../Xconfigurator.pm_.c:645
msgid "Change Graphic card"
msgstr "Endre grafikk-kort"

#: ../Xconfigurator.pm_.c:646
msgid "Change Resolution"
msgstr "Endre oppløsning"

#: ../Xconfigurator.pm_.c:647
msgid "Automatical resolutions search"
msgstr "Automatisk oppløsningssøk"

#: ../Xconfigurator.pm_.c:651
msgid "Show information"
msgstr "Vis informasjon"

#: ../Xconfigurator.pm_.c:652
msgid "Test again"
msgstr "Test igjen"

#: ../Xconfigurator.pm_.c:653
msgid "Quit"
msgstr "Slutt"

#: ../Xconfigurator.pm_.c:656
msgid "What do you want to do?"
msgstr "Hva vil du gjøre?"

#: ../Xconfigurator.pm_.c:661
msgid "X at startup"
msgstr "X ved oppstart"

#: ../Xconfigurator.pm_.c:667
msgid "X successfully configured"
msgstr "Konfigurasjon av X vellykket"

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors"
msgstr "256 farger"

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors"
msgstr "65 tusen farger"

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors"
msgstr "16 millioner farger"

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors"
msgstr "4 milliarder farger"

#: ../Xconfigurator_consts.pm_.c:20
msgid "256 kb"
msgstr "256 kb"

#: ../Xconfigurator_consts.pm_.c:21
msgid "512 kb"
msgstr "512 kb"

#: ../Xconfigurator_consts.pm_.c:22
msgid "1 mb"
msgstr "1 mb"

#: ../Xconfigurator_consts.pm_.c:23
msgid "2 mb"
msgstr "2 mb"

#: ../Xconfigurator_consts.pm_.c:24
msgid "4 mb"
msgstr "4 mb"

#: ../Xconfigurator_consts.pm_.c:25
msgid "8 mb"
msgstr "8 mb"

#: ../Xconfigurator_consts.pm_.c:26
msgid "16 mb or more"
msgstr "16 mb eller mer"

#: ../Xconfigurator_consts.pm_.c:30
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Standard VGA, 640x480 i 60 Hz"

#: ../Xconfigurator_consts.pm_.c:31
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA 800x600 i 56 Hz"

#: ../Xconfigurator_consts.pm_.c:32
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 kompatibel, 1024x768 i 87 Hz interlaced (ikke 800x600)"

#: ../Xconfigurator_consts.pm_.c:33
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 i 87 Hz interlaced, 800x600 i 56 Hz"

#: ../Xconfigurator_consts.pm_.c:34
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Utvidet Super VGA, 800x600 i 60 Hz, 640x480 i 72 Hz"

#: ../Xconfigurator_consts.pm_.c:35
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Ikke-interlaced SVGA, 1024x768 i 60 Hz, 800x600 i 72 Hz"

#: ../Xconfigurator_consts.pm_.c:36
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "Høyfrekvens SVGA, 1024x768 i 70 Hz"

#: ../Xconfigurator_consts.pm_.c:37
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 60 Hz"

#: ../Xconfigurator_consts.pm_.c:38
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 74 Hz"

#: ../Xconfigurator_consts.pm_.c:39
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Flerfrekvens som kan klare 1280x1024 i 76 Hz"

#: ../Xconfigurator_consts.pm_.c:40
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Monitor som kan klare 1600x1200 i 70 Hz"

#: ../Xconfigurator_consts.pm_.c:41
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Monitor som kan klare 1600x1200 i 76 Hz"

#: ../Xconfigurator_consts.pm_.c:46
msgid "No RAMDAC Setting (recommended)"
msgstr "Ingen RAMDAC innstilling (anbefalt)"

#: ../Xconfigurator_consts.pm_.c:47
msgid "AT&T 20C490 (S3 and AGX servers, ARK driver)"
msgstr "AT&T 20C490 (S3 og AGX tjenere, ARK driver)"

#: ../Xconfigurator_consts.pm_.c:48
msgid "AT&T 20C498/21C498/22C498 (S3, autodetected)"
msgstr "AT&T 20C498/21C498/22C498 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:49
msgid "AT&T 20C409/20C499 (S3, autodetected)"
msgstr "AT&T 20C409/20C499 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:50
msgid "AT&T 20C505 (S3)"
msgstr "AT&T 20C505 (S3)"

#: ../Xconfigurator_consts.pm_.c:51
msgid "BrookTree BT481 (AGX)"
msgstr "BrookTree BT481 (AGX)"

#: ../Xconfigurator_consts.pm_.c:52
msgid "BrookTree BT482 (AGX)"
msgstr "BrookTree BT482 (AGX)"

#: ../Xconfigurator_consts.pm_.c:53
msgid "BrookTree BT485/9485 (S3)"
msgstr "BrookTree BT485/9485 (S3)"

#: ../Xconfigurator_consts.pm_.c:54
msgid "Sierra SC15025 (S3, AGX)"
msgstr "Sierra SC15025 (S3, AGX)"

#: ../Xconfigurator_consts.pm_.c:55
msgid "S3 GenDAC (86C708) (autodetected)"
msgstr "S3 GenDAC (86C708) (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:56
msgid "S3 SDAC (86C716) (autodetected)"
msgstr "S3 SDAC (86C716) (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:57
msgid "STG-1700 (S3, autodetected)"
msgstr "STG-1700 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:58
msgid "STG-1703 (S3, autodetected)"
msgstr "STG-1703 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:59
msgid "TI 3020 (S3)"
msgstr "TI 3020 (S3)"

#: ../Xconfigurator_consts.pm_.c:60
msgid "TI 3025 (S3, autodetected)"
msgstr "TI 3025 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:61
msgid "TI 3026 (S3, autodetected)"
msgstr "TI 3026 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:62
msgid "IBM RGB 514 (S3, autodetected)"
msgstr "IBM RGB 514 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:63
msgid "IBM RGB 524 (S3, autodetected)"
msgstr "IBM RGB 524 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:64
msgid "IBM RGB 525 (S3, autodetected)"
msgstr "IBM RGB 525 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:65
msgid "IBM RGB 526 (S3)"
msgstr "IBM RGB 526 (S3)"

#: ../Xconfigurator_consts.pm_.c:66
msgid "IBM RGB 528 (S3, autodetected)"
msgstr "IBM RGB 528 (S3, oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:67
msgid "ICS5342 (S3, ARK)"
msgstr "ICS5342 (S3, ARK)"

#: ../Xconfigurator_consts.pm_.c:68
msgid "ICS5341 (W32)"
msgstr "ICS5341 (W32)"

#: ../Xconfigurator_consts.pm_.c:69
msgid "IC Works w30C516 ZoomDac (ARK)"
msgstr "IC Works w30C516 ZoomDac (ARK)"

#: ../Xconfigurator_consts.pm_.c:70
msgid "Normal DAC"
msgstr "Normal DAC"

#: ../Xconfigurator_consts.pm_.c:74
msgid "No Clockchip Setting (recommended)"
msgstr "Ingen Clockchip innstilling (anbefalt)"

#: ../Xconfigurator_consts.pm_.c:75
msgid "Chrontel 8391"
msgstr "Chrontel 8391"

#: ../Xconfigurator_consts.pm_.c:76
msgid "ICD2061A and compatibles (ICS9161A => DCS2824)"
msgstr "ICD2061A og kompatible (ICS9161A => DCS2824)"

#: ../Xconfigurator_consts.pm_.c:77
msgid "ICS2595"
msgstr "ICS2595"

#: ../Xconfigurator_consts.pm_.c:78
msgid "ICS5342 (similar to SDAC, but not completely compatible)"
msgstr "ICS5342 (lik SDAC, men ikke helt kompatibel)"

#: ../Xconfigurator_consts.pm_.c:79
msgid "ICS5341"
msgstr "ICS5341"

#: ../Xconfigurator_consts.pm_.c:80
msgid "S3 GenDAC (86C708) and ICS5300 (autodetected)"
msgstr "S3 GenDAC (86C708) og ICS5300 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:81
msgid "S3 SDAC (86C716)"
msgstr "S3 SDAC (86C716)"

#: ../Xconfigurator_consts.pm_.c:82
msgid "STG 1703 (autodetected)"
msgstr "STG 1703 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:83
msgid "Sierra SC11412"
msgstr "Sierra SC11412"

#: ../Xconfigurator_consts.pm_.c:84
msgid "TI 3025 (autodetected)"
msgstr "TI 3025 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:85
msgid "TI 3026 (autodetected)"
msgstr "TI 3026 (oppdaget automatisk)"

#: ../Xconfigurator_consts.pm_.c:86
msgid "IBM RGB 51x/52x (autodetected)"
msgstr "IBM RGB 51x/52x (oppdaget automatisk)"

#: ../diskdrake.pm_.c:15
msgid "Create"
msgstr "Opprett"

#: ../diskdrake.pm_.c:16
msgid "Unmount"
msgstr "Demonter"

#: ../diskdrake.pm_.c:17
msgid "Delete"
msgstr "Slett"

#: ../diskdrake.pm_.c:17
msgid "Format"
msgstr "Formater"

#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:386
msgid "Move"
msgstr "Flytt"

#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:434
msgid "Resize"
msgstr "Endre størrelse"

#: ../diskdrake.pm_.c:17
msgid "Type"
msgstr "Type"

#: ../diskdrake.pm_.c:18
msgid "Mount_point"
msgstr "Monteringspunkt"

#: ../diskdrake.pm_.c:30
msgid "Write /etc/fstab"
msgstr "Skriv /etc/fstab"

#: ../diskdrake.pm_.c:31
msgid "Normal > Expert"
msgstr "Normal > Ekspert"

#: ../diskdrake.pm_.c:32
msgid "Expert > Normal"
msgstr "Expert > Normal"

#: ../diskdrake.pm_.c:33
msgid "Restore from file"
msgstr "Gjenopprett fra fil"

#: ../diskdrake.pm_.c:34
msgid "Save in file"
msgstr "Lagre i fil"

#: ../diskdrake.pm_.c:35
msgid "Restore from floppy"
msgstr "Gjenopprett fra diskett"

#: ../diskdrake.pm_.c:36
msgid "Save on floppy"
msgstr "Lagre på diskett"

#: ../diskdrake.pm_.c:37
msgid "Done"
msgstr "Ferdig"

#: ../diskdrake.pm_.c:40
msgid "Clear all"
msgstr "Fjern alle"

#: ../diskdrake.pm_.c:41
msgid "Format all"
msgstr "Formater alle"

#: ../diskdrake.pm_.c:42
msgid "Auto allocate"
msgstr "Automatisk allokering"

#: ../diskdrake.pm_.c:45
msgid "All primary partitions are used"
msgstr "Alle primære partisjoner er i bruk"

#: ../diskdrake.pm_.c:45
msgid "I can't add any more partition"
msgstr "Jeg kan ikke legge til flere partisjoner"

#: ../diskdrake.pm_.c:45
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"For å ha flere partisjoner vennligst slett en for å kunne opprette en "
"utvidet partisjon"

#: ../diskdrake.pm_.c:48
msgid "Undo"
msgstr "Angre"

#: ../diskdrake.pm_.c:49
msgid "Write partition table"
msgstr "Skriv partisjonstabell"

#: ../diskdrake.pm_.c:118
#, c-format
msgid "After %s partition %s,"
msgstr "Etter %s partisjon %s,"

#: ../diskdrake.pm_.c:118 ../diskdrake.pm_.c:377 ../diskdrake.pm_.c:404
msgid "Read carefully!"
msgstr "Les nøye!"

#: ../diskdrake.pm_.c:118
msgid "all data on this partition will be lost"
msgstr "alle data på denne partisjonen vil gå tapt"

#: ../diskdrake.pm_.c:136 ../install2.pm_.c:384 ../install_steps.pm_.c:76
#: ../install_steps_interactive.pm_.c:33
msgid "Error"
msgstr "Feil"

#: ../diskdrake.pm_.c:157 ../diskdrake.pm_.c:502
msgid "Mount point: "
msgstr "Monteringspunkt: "

#: ../diskdrake.pm_.c:158 ../diskdrake.pm_.c:180
msgid "Device: "
msgstr "Enhet: "

#: ../diskdrake.pm_.c:159
#, fuzzy, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS bokstav: %s (bare en gjetning)\n"

#: ../diskdrake.pm_.c:160 ../diskdrake.pm_.c:183
msgid "Type: "
msgstr "Type: "

#: ../diskdrake.pm_.c:161
#, c-format
msgid "Start: sector /*%s\n"
msgstr "Start: sektor /*%s\n"

#: ../diskdrake.pm_.c:162
msgid "Size: %s MB (%s%%)"
msgstr "Størrelse: %s MB (%s%%)"

#: ../diskdrake.pm_.c:163
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorer"

#: ../diskdrake.pm_.c:165
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Sylinder %d til sylinder %d\n"

#: ../diskdrake.pm_.c:166
msgid "Formatted\n"
msgstr "Formatert\n"

#: ../diskdrake.pm_.c:167
msgid "Not formatted\n"
msgstr "Ikke formatert\n"

#: ../diskdrake.pm_.c:168
msgid "Mounted\n"
msgstr "Montert\n"

#: ../diskdrake.pm_.c:169
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partisjon startet opp som standard\n"
"    (for MS-DOS oppstart, ikke for lilo)\n"

#: ../diskdrake.pm_.c:181
#, c-format
msgid "Size: %d MB\n"
msgstr "Størrelse: %d MB\n"

#: ../diskdrake.pm_.c:182
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometri: %s sylindere, %s hoder, %s sektorer\n"

#: ../diskdrake.pm_.c:184
#, c-format
msgid "on bus %d id %d\n"
msgstr "på buss %d id %d\n"

#: ../diskdrake.pm_.c:196
msgid "Mount"
msgstr "Montere"

#: ../diskdrake.pm_.c:198
msgid "Active"
msgstr "Aktiv"

#: ../diskdrake.pm_.c:304
msgid "Leave without saving"
msgstr "Slutt uten å lagre"

#: ../diskdrake.pm_.c:304
#, fuzzy
msgid "Quit program without writing the partition table?"
msgstr "Avslutte programmet uten å skrive partisjonstabell?"

#: ../diskdrake.pm_.c:319
msgid "changing type of"
msgstr "endrer type av"

#: ../diskdrake.pm_.c:321
msgid "Change partition type"
msgstr "Endre partisjonstype"

#: ../diskdrake.pm_.c:322
msgid "Which partition type do you want?"
msgstr "Hvilken partisjonstype ønsker du?"

#: ../diskdrake.pm_.c:339
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Hvor vil du montere %s enheten?"

#: ../diskdrake.pm_.c:371
msgid "formatting"
msgstr "formatering"

#: ../diskdrake.pm_.c:377
msgid "After formatting all partitions,"
msgstr "Etter formatering av alle partisjonene"

#: ../diskdrake.pm_.c:377
msgid "all data on these partitions will be lost"
msgstr "alle data på disse partisjonene vil gå tapt"

#: ../diskdrake.pm_.c:387
msgid "Which disk do you want to move to?"
msgstr "Hvilken disk vil du flytte til?"

#: ../diskdrake.pm_.c:391
msgid "Sector"
msgstr "Sektor"

#: ../diskdrake.pm_.c:392
msgid "Which sector do you want to move to?"
msgstr "Hvilken sektor vil du flytte til?"

#: ../diskdrake.pm_.c:395
msgid "Moving"
msgstr "Flytter"

#: ../diskdrake.pm_.c:395
msgid "Moving partition..."
msgstr "Flytter partisjon..."

#: ../diskdrake.pm_.c:404
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partisjonstabellen på disk %s blir nå skrevet til disk!"

#: ../diskdrake.pm_.c:406
msgid "You'll need to reboot before the modification can take place"
msgstr "Du må starte maskinen på nytt for at modifiseringene skal tre i kraft"

#: ../diskdrake.pm_.c:425
msgid "Computing fat filesystem bounds"
msgstr "Beregner fat filsystemgrense"

#: ../diskdrake.pm_.c:425 ../diskdrake.pm_.c:461 ../interactive_gtk.pm_.c:129
msgid "Resizing"
msgstr "Endrer størrelse"

#: ../diskdrake.pm_.c:431
msgid "resizing"
msgstr "Endrer størrelse"

#: ../diskdrake.pm_.c:441
msgid "Choose the new size"
msgstr "Velg ny størrelse"

#: ../diskdrake.pm_.c:441
msgid "MB"
msgstr "MB"

#: ../diskdrake.pm_.c:479
msgid "Create a new partition"
msgstr "Opprette en ny partisjon"

#: ../diskdrake.pm_.c:495
msgid "Start sector: "
msgstr "Start sektor: "

#: ../diskdrake.pm_.c:498
msgid "Size in MB: "
msgstr "Størrelse i MB: "

#: ../diskdrake.pm_.c:501
msgid "Filesystem type: "
msgstr "Filsystemtype: "

#: ../diskdrake.pm_.c:503
msgid "Preference: "
msgstr "Valg: "

#: ../diskdrake.pm_.c:545 ../diskdrake.pm_.c:561
msgid "Select file"
msgstr "Velg fil"

#: ../diskdrake.pm_.c:562
msgid "Warning"
msgstr "Advarsel"

#: ../fs.pm_.c:69 ../fs.pm_.c:75
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering av %s mislykket"

#: ../fs.pm_.c:94
#, c-format
msgid "don't know how to format %s in type %s"
msgstr "Vet ikke hvordan formatere %s i type %s"

#: ../fs.pm_.c:107
msgid "nfs mount failed"
msgstr "nfs montering mislykket"

#: ../fs.pm_.c:124
msgid "mount failed: "
msgstr "montering mislykket: "

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr "feil ved demontering av %s: %s"

#: ../fsedit.pm_.c:44
#, c-format
msgid "An error occurred while getting the geometry of block device %s: %s"
msgstr "En feil oppsto ved henting av geometrien til blokkenhet %s: %s"

#: ../fsedit.pm_.c:123
msgid "Mount points must begin with a leading /"
msgstr "Monteringspunkter må begynne med /"

#: ../fsedit.pm_.c:126
#, c-format
msgid "There is already a partition with mount point %s"
msgstr "Det finnes allerede en partisjon med monteringspunkt %s"

#: ../fsedit.pm_.c:250
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Feil ved åpning av %s for skriving: %s"

#: ../install2.pm_.c:35
msgid "Choose preferred language for install and system usage."
msgstr ""

#: ../install2.pm_.c:38
msgid "Choose on the list of keyboards, the one corresponding to yours"
msgstr ""

#: ../install2.pm_.c:41
#, fuzzy
msgid ""
"Choose \"Installation\" if there are no previous versions of Linux\n"
"installed, or if you wish use to multiple distributions or versions.\n"
"\n"
"Choose \"Update\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)."
msgstr ""
"Velg \"Installasjon\" hvis du aldri har installert Linux-systemet på denne "
"maskinen eller du ønsker\n"
"å installere flere av dem på denne maskinen.\n"
"\n"
"Velg \"Oppdater\" hvis du ønsker å oppdatere et Linux system Mandrake 5.1 "
"(Venice), 5.2 (Leeloo), 5.3 (Festen) eller\n"
" 6.0 (Venus)."

#: ../install2.pm_.c:48
msgid ""
"Select:\n"
"  - Beginner: If you have not installed Linux before, or wish to install\n"
"the distribution elected \"Product of the year\" for 1999, click here.\n"
"  - Developer: If you are familiar with Linux and will be using the\n"
"computer primarily for software development, you will find happiness\n"
"here.\n"
"  - Server: If you wish to install a general purpose server, or the\n"
"Linux distribution elected \"Distribution/Server\" for 1999, select\n"
"this.\n"
"  - Expert: If you know GNU/Linux and want to perform a highly\n"
"customized installation, this Install Class is for you."
msgstr ""
"Velg:\n"
"  - Nybegynner: hvis du aldri har installert Linux-systemet før og ønsker å "
"installere system som er valgt til \n"
"\"Product of the year\" for 1999, klikk her.\n"
"  - Utvikler: hvis du ønsker å bruke Linux-systemet ditt til å lage program- "
"vare vil du finne lykken her.\n"
"  - Tjener: hvis du ønsker å installere operativsystemet som er valgt til "
"\"Distribution/Server\" for 1999,\n"
"velg denne installasjonen.\n"
"  - Ekspert: hvis du allerede kjenner GNU/Linux godt og ønsker å "
"opprettholde\n"
"kontrollen over installasjonen så er dette valget for deg."

#: ../install2.pm_.c:61
#, fuzzy
msgid ""
"The system did not detect a SCSI card. If you have one (or several)\n"
"click on \"Yes\" and choose the module\\(s) to be tested. Otherwise, \n"
"select \"No\".\n"
"\n"
"If you don't know if your computer has SCSI interfaces, consult the\n"
"original documentation delivered with the computer, or if you use\n"
"Microsoft Windows 95/98, inspect the information available via the "
"\"Control\n"
"panel\", \"System's icon, \"Device Manager\" tab."
msgstr ""
"Systemet fant ikke noen SCSI-kort. Hvis du har ett (eller flere) klikk på "
"\"Ja\" og velg modul\n"
"som skal testes. I motsatt fall klikk på \"Nei\".\n"
"\n"
"Hvis du ikke vet om du har SCSI grensesnitt, se i dokumentasjonen levert med "
"datamaskinen din\n"
"eller hvis du bruker Microsoft Windows 95/98, se i \"Enhets- behandling\" "
"under \"System\"\n"
" i \"Kontrollpanelet\"."

#: ../install2.pm_.c:71
msgid ""
"At this point, hard drive partitions must be defined. (Unless you\n"
"are overwriting a previous install of Linux and have already defined\n"
"your hard drives partitions as desired.) This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use. Two common partition are: \"root\" which is the point at\n"
"which the filesystem's directory structure starts, and \"boot\", which\n"
"contains those files necessary to start the operating system when the\n"
"computer is first turned on. Because the effects of this process are\n"
"usually irreversible, partitioning can be intimidating and stressful to\n"
"the inexperienced. DiskDrake simplifies the process so that it need not\n"
"be. Consult the documentation and take your time before proceeding."
msgstr ""

#: ../install2.pm_.c:84
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use. At this time, you may wish to re-format some pre-existing\n"
"partitions to erase the data they contain. Note: it is not necessary to\n"
"re-format pre-existing partitions, particularly if they contain files or\n"
"data you wish to keep. Typically retained are: /home and /usr/local."
msgstr ""
"Partisjonene som er opprettet må formateres så systemet kan bruke dem.\n"
"Du kan også formatere partisjoner er opprettet og brukt før hvis du ønsker å "
"fjerne alle data.\n"
"Merk at det ikke er nødvendig å formatere partisjoner som er opprettet før "
"hvis de inneholder data som\n"
"du ønsker å beholde (typiske tilfeller: / home and / usr/local)."

#: ../install2.pm_.c:91
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"Please note that some packages require the installation of others. These\n"
"are referred to as package dependencies. The packages you select, and\n"
"the packages they require will automatically be added to the\n"
"installation configuration. It is impossible to install a package\n"
"without installing all of its dependencies.\n"
"\n"
"Information on each category and specific package is available in the\n"
"area titled \"Info\". This is located above the buttons: [confirmation]\n"
"[selection] [unselection]."
msgstr ""
"Du har nå muligheten til å velge programvaren som du ønsker å installere.\n"
"\n"
"Vennligst merk at pakkene håndterer avhengigheter: dette betyr at hvis du "
"ønsker å installere\n"
"programvare som trenger tilstedeværelsen av annen programvare, så vil også "
"denne bli automatisk valgt\n"
"og det vil være umulig for deg å installere den første uten å installere den "
"andre.\n"
"\n"
"Informasjon om hver kategori av pakkene og hver av dem er tilgjengelig i "
"sone \"Infos\"\n"
"funnet over knappene til bekreftelse/valg/fjern valg."

#: ../install2.pm_.c:104
msgid ""
"The packages selected are now being installed. This operation\n"
"should only take a few minutes."
msgstr ""
"Pakkene som er valgt blir nå installert på systemet ditt. Dette tar bare "
"noen få minutter."

#: ../install2.pm_.c:108 ../install2.pm_.c:111 ../install2.pm_.c:114
#: ../install2.pm_.c:117 ../install2.pm_.c:120 ../install2.pm_.c:152
#: ../install2.pm_.c:167 ../install2.pm_.c:199
msgid "Help"
msgstr "Hjelp"

#: ../install2.pm_.c:123
msgid ""
"An administrator password for your Linux system must now be\n"
"assigned. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"Choose this password carefully. Only persons with access to an\n"
"administrator account can maintain and administer the system.\n"
"Alternatively, unauthorized use of an administrator account can be\n"
"extremely dangerous to the integrity of the system, the data upon it,\n"
"and other systems with which it is interfaced. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should never be written down. Do not make the password too long or\n"
"complicated that it will be difficult to remember.\n"
"\n"
"When you login as Administrator, at \"login\" type \"root\" and at\n"
"\"password\", type the password that was created here."
msgstr ""

#: ../install2.pm_.c:140
msgid ""
"You can now authorize one or more people to use your Linux\n"
"system. Each user account will have their own customizable environment.\n"
"\n"
"It is very important that you create a regular user account, even if \n"
"there will only be one principle user of the system. The administrative\n"
"\"root\" account should not be used for day to day operation of the\n"
"computer.  It is a security risk.  The use of a regular user account\n"
"protects you and the system from yourself. The root account should only\n"
"be used for administrative and maintenance tasks that can not be\n"
"accomplished from a regular user account."
msgstr ""

#: ../install2.pm_.c:155
#, fuzzy
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive\"."
msgstr ""
"Systemet blir nå kopiert til disken din, det er nå på tide å indikere hvor "
"starten skal være.\n"
"Med mindre du vet akkurat hva du gjør, velg alltid \"Første sektor av "
"disken\"."

#: ../install2.pm_.c:162
msgid ""
"It is now time to configure the video card and monitor\n"
"configuration for the X windows Graphic User Interface (GUI). First\n"
"select your monitor. Next, you may test the configuration and change\n"
"your selections if necessary."
msgstr ""

#: ../install2.pm_.c:173
msgid "Choose your language"
msgstr "Velg språk"

#: ../install2.pm_.c:174
msgid "Choose install or upgrade"
msgstr "Velg installering eller oppgradering"

#: ../install2.pm_.c:175
msgid "Select installation class"
msgstr "Velg installasjonsklasse"

#: ../install2.pm_.c:176
#, fuzzy
msgid "Choose your keyboard"
msgstr "Velg språk"

#: ../install2.pm_.c:177
msgid "Setup SCSI"
msgstr "Oppsett SCSI"

#: ../install2.pm_.c:178
msgid "Setup filesystems"
msgstr "Oppsett filsystemer"

#: ../install2.pm_.c:179
msgid "Format partitions"
msgstr "Formater partisjoner"

#: ../install2.pm_.c:180
msgid "Choose packages to install"
msgstr "Velg pakker for installering"

#: ../install2.pm_.c:181
msgid "Install system"
msgstr "Installer systemet"

#: ../install2.pm_.c:182
#, fuzzy
msgid "Configure mouse"
msgstr "Konfigurer X"

#: ../install2.pm_.c:183
msgid "Configure networking"
msgstr "Konfigurer nettverk"

#: ../install2.pm_.c:184
#, fuzzy
msgid "Configure timezone"
msgstr "Konfigurer X"

#: ../install2.pm_.c:186
#, fuzzy
msgid "Configure printer"
msgstr "Konfigurer X"

#: ../install2.pm_.c:187 ../install_steps_graphical.pm_.c:447
msgid "Set root password"
msgstr "Sett root passord"

#: ../install2.pm_.c:188
msgid "Add a user"
msgstr "Legg til en bruker"

#: ../install2.pm_.c:189
msgid "Create bootdisk"
msgstr "Opprett oppstartdiskett"

#: ../install2.pm_.c:190
msgid "Install bootloader"
msgstr "Installer oppstartslaster"

#: ../install2.pm_.c:191
msgid "Configure X"
msgstr "Konfigurer X"

#: ../install2.pm_.c:192
msgid "Exit install"
msgstr "Gå ut av installering"

#: ../install2.pm_.c:224
msgid "beginner"
msgstr "nybegynner"

#: ../install2.pm_.c:224
msgid "developer"
msgstr "utvikler"

#: ../install2.pm_.c:224
msgid "expert"
msgstr "ekspert"

#: ../install2.pm_.c:224
msgid "server"
msgstr "tjener"

#: ../install2.pm_.c:394
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
"filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"

#: ../install2.pm_.c:409
msgid "partitioning failed: no root filesystem"
msgstr "partisjonering feilet: intet root filsystem"

#: ../install_steps.pm_.c:273
msgid "no floppy available"
msgstr ""

#: ../install_steps_graphical.pm_.c:209
msgid "Hide"
msgstr "Gjem"

#: ../install_steps_graphical.pm_.c:209
msgid "Show All"
msgstr "Vis alle"

#: ../install_steps_graphical.pm_.c:213
msgid "Select All"
msgstr "Velg alle"

#: ../install_steps_graphical.pm_.c:213
msgid "Unselect All"
msgstr "Fjern alle"

#: ../install_steps_graphical.pm_.c:280
msgid "Choose the packages you want to install"
msgstr "Velg pakker du ønsker å installere"

#: ../install_steps_graphical.pm_.c:291
msgid " Mb"
msgstr "Mb"

#: ../install_steps_graphical.pm_.c:291
msgid "Total size: "
msgstr "Total størrelse: "

#: ../install_steps_graphical.pm_.c:292
msgid "Info"
msgstr ""

#: ../install_steps_graphical.pm_.c:317
msgid "Installing"
msgstr "Installerer"

#: ../install_steps_graphical.pm_.c:323
msgid "Please wait, "
msgstr "Vennligst vent, "

#: ../install_steps_graphical.pm_.c:325
msgid "Time remaining "
msgstr "Tid som gjenstår "

#: ../install_steps_graphical.pm_.c:326
msgid "Total time "
msgstr "Total tid "

#: ../install_steps_graphical.pm_.c:331
msgid "preparing installation"
msgstr "forbereder installasjon"

#: ../install_steps_graphical.pm_.c:352
#, c-format
msgid "installing package %s"
msgstr "installerer pakke %s"

#: ../install_steps_graphical.pm_.c:383
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigurerer nettverks-enhet %s"

#: ../install_steps_graphical.pm_.c:391
msgid "IP address:"
msgstr "IP adresse:"

#: ../install_steps_graphical.pm_.c:392
msgid "Netmask:"
msgstr "Nettmaske:"

#: ../install_steps_graphical.pm_.c:401
msgid "IP address should be in format 1.2.3.4"
msgstr ""

#: ../install_steps_graphical.pm_.c:414
#, fuzzy
msgid "Configuring network"
msgstr "Konfigurer nettverk"

#: ../install_steps_graphical.pm_.c:422
#, fuzzy
msgid "Host name:"
msgstr "Brukernavn"

#: ../install_steps_graphical.pm_.c:423
#, fuzzy
msgid "DNS server:"
msgstr "tjener"

#: ../install_steps_graphical.pm_.c:424
msgid "Gateway:"
msgstr ""

#: ../install_steps_graphical.pm_.c:425
msgid "Gateway device:"
msgstr ""

#: ../install_steps_graphical.pm_.c:450 ../install_steps_graphical.pm_.c:658
msgid "Password"
msgstr "Passord"

#: ../install_steps_graphical.pm_.c:451 ../install_steps_graphical.pm_.c:659
msgid "Password (again)"
msgstr "Passord (igjen)"

#: ../install_steps_graphical.pm_.c:460 ../install_steps_graphical.pm_.c:674
msgid "Please try again"
msgstr "Vennligst prøv igjen"

#: ../install_steps_graphical.pm_.c:460 ../install_steps_graphical.pm_.c:674
msgid "You must enter the same password"
msgstr "Du må skrive inn det samme passordet"

#: ../install_steps_graphical.pm_.c:461
msgid "This password is too simple"
msgstr "Dette passordet er for enkelt"

#: ../install_steps_graphical.pm_.c:470
#, fuzzy
msgid "Printer"
msgstr "Enhet: "

#: ../install_steps_graphical.pm_.c:471
msgid "Would you like to configure a printer?"
msgstr ""

#: ../install_steps_graphical.pm_.c:479 ../install_steps_interactive.pm_.c:179
msgid "Standard Printer Options"
msgstr ""

#: ../install_steps_graphical.pm_.c:480 ../install_steps_interactive.pm_.c:180
msgid ""
"Every print queue (which print jobs are directed to) needs a \n"
"\t\t\t   name (often lp) and a spool directory associated with it. What \n"
"\t\t\t   name and directory should be used for this queue?"
msgstr ""

#: ../install_steps_graphical.pm_.c:483 ../install_steps_interactive.pm_.c:183
msgid "Name of queue:"
msgstr ""

#: ../install_steps_graphical.pm_.c:483 ../install_steps_interactive.pm_.c:183
msgid "Spool directory:"
msgstr ""

#: ../install_steps_graphical.pm_.c:494 ../install_steps_interactive.pm_.c:194
msgid "Select Printer Connection"
msgstr ""

#: ../install_steps_graphical.pm_.c:495 ../install_steps_interactive.pm_.c:195
msgid "How is the printer connected?"
msgstr ""

#: ../install_steps_graphical.pm_.c:510 ../install_steps_interactive.pm_.c:210
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:512 ../install_steps_interactive.pm_.c:212
msgid "I detect :"
msgstr ""

#: ../install_steps_graphical.pm_.c:516 ../install_steps_interactive.pm_.c:216
msgid "Local Printer Device"
msgstr ""

#: ../install_steps_graphical.pm_.c:518 ../install_steps_interactive.pm_.c:218
#, fuzzy
msgid "Printer Device:"
msgstr "Enhet: "

#: ../install_steps_graphical.pm_.c:524 ../install_steps_interactive.pm_.c:224
msgid "Remote lpd Printer Options"
msgstr ""

#: ../install_steps_graphical.pm_.c:525 ../install_steps_interactive.pm_.c:225
msgid ""
"To use a remote lpd print queue, you need to supply \n"
"the hostname of the printer server and the queue name \n"
"on that server which jobs should be placed in."
msgstr ""

#: ../install_steps_graphical.pm_.c:528 ../install_steps_interactive.pm_.c:228
#, fuzzy
msgid "Remote hostname:"
msgstr "Brukernavn"

#: ../install_steps_graphical.pm_.c:528 ../install_steps_interactive.pm_.c:228
msgid "Remote queue:"
msgstr ""

#: ../install_steps_graphical.pm_.c:533 ../install_steps_interactive.pm_.c:233
msgid "SMB/Windows 95/NT Printer Options"
msgstr ""

#: ../install_steps_graphical.pm_.c:534 ../install_steps_interactive.pm_.c:234
msgid ""
"To print to a SMB printer, you need to provide the \n"
"SMB host name (this is not always the same as the machines \n"
"TCP/IP hostname) and possibly the IP address of the print server, as \n"
"well as the share name for the printer you wish to access and any \n"
"applicable user name, password, and workgroup information."
msgstr ""

#: ../install_steps_graphical.pm_.c:539 ../install_steps_interactive.pm_.c:239
#, fuzzy
msgid "SMB server IP:"
msgstr "tjener"

#: ../install_steps_graphical.pm_.c:539 ../install_steps_interactive.pm_.c:239
#, fuzzy
msgid "SMB server host:"
msgstr "tjener"

#: ../install_steps_graphical.pm_.c:540 ../install_steps_graphical.pm_.c:554
#: ../install_steps_interactive.pm_.c:240
#: ../install_steps_interactive.pm_.c:254
#, fuzzy
msgid "Password:"
msgstr "Passord"

#: ../install_steps_graphical.pm_.c:540 ../install_steps_interactive.pm_.c:240
#, fuzzy
msgid "Share name:"
msgstr "Brukernavn"

#: ../install_steps_graphical.pm_.c:540 ../install_steps_graphical.pm_.c:554
#: ../install_steps_interactive.pm_.c:240
#: ../install_steps_interactive.pm_.c:254
#, fuzzy
msgid "User name:"
msgstr "Brukernavn"

#: ../install_steps_graphical.pm_.c:541 ../install_steps_interactive.pm_.c:241
msgid "Workgroup:"
msgstr ""

#: ../install_steps_graphical.pm_.c:548 ../install_steps_interactive.pm_.c:248
msgid "NetWare Printer Options"
msgstr ""

#: ../install_steps_graphical.pm_.c:549 ../install_steps_interactive.pm_.c:249
msgid ""
"To print to a NetWare printer, you need to provide the \n"
"NetWare print server name (this is not always the same as the machines \n"
"TCP/IP hostname) as well as the print queue name for the printer you \n"
"wish to access and any applicable user name and password."
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_interactive.pm_.c:253
msgid "Print Queue Name:"
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_interactive.pm_.c:253
msgid "Printer Server:"
msgstr ""

#: ../install_steps_graphical.pm_.c:575 ../install_steps_interactive.pm_.c:275
#, fuzzy
msgid "Configure Printer"
msgstr "Konfigurer X"

#: ../install_steps_graphical.pm_.c:576 ../install_steps_interactive.pm_.c:276
#, fuzzy
msgid "What type of printer do you have?"
msgstr "Hva slags brukertype vil du ha?"

#: ../install_steps_graphical.pm_.c:587 ../install_steps_graphical.pm_.c:588
#: ../install_steps_interactive.pm_.c:287
#: ../install_steps_interactive.pm_.c:288
msgid "Paper Size"
msgstr ""

#: ../install_steps_graphical.pm_.c:607 ../install_steps_interactive.pm_.c:307
msgid "CRLF"
msgstr ""

#: ../install_steps_graphical.pm_.c:608 ../install_steps_interactive.pm_.c:308
msgid "Fix stair-stepping of text?"
msgstr ""

#: ../install_steps_graphical.pm_.c:623 ../install_steps_interactive.pm_.c:323
#, fuzzy
msgid "Configure Uniprint Driver"
msgstr "Konfigurer X"

#: ../install_steps_graphical.pm_.c:624 ../install_steps_interactive.pm_.c:324
msgid "You may now configure the uniprint options for this printer."
msgstr ""

#: ../install_steps_graphical.pm_.c:632 ../install_steps_interactive.pm_.c:332
#, fuzzy
msgid "Configure Color Depth"
msgstr "Konfigurer X"

#: ../install_steps_graphical.pm_.c:633 ../install_steps_interactive.pm_.c:333
msgid "You may now configure the color options for this printer."
msgstr ""

#: ../install_steps_graphical.pm_.c:653
msgid "Add user"
msgstr "Legg til bruker"

#: ../install_steps_graphical.pm_.c:657
msgid "User name"
msgstr "Brukernavn"

#: ../install_steps_graphical.pm_.c:660
msgid "Real name"
msgstr "Virkelig navn"

#: ../install_steps_graphical.pm_.c:661
msgid "Shell"
msgstr "Skall"

#: ../install_steps_graphical.pm_.c:676
msgid "Please give a user name"
msgstr "Vennligst oppgi et brukernavn"

#: ../install_steps_graphical.pm_.c:677
#, fuzzy
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brukernavnet kan kun inneholde bokstaver, tall, `-' og `_'"

#: ../install_steps_interactive.pm_.c:33
msgid "An error occurred"
msgstr "En feil oppsto"

#: ../install_steps_interactive.pm_.c:45
msgid "Which language do you want?"
msgstr "Hvilket språk ønsker du?"

#: ../install_steps_interactive.pm_.c:56
#, fuzzy
msgid "Which keyboard do you have?"
msgstr "Hvilken sektor vil du flytte til?"

#: ../install_steps_interactive.pm_.c:65
msgid "Install/Upgrade"
msgstr "Installer/Oppgrader"

#: ../install_steps_interactive.pm_.c:66
#, fuzzy
msgid "Is this an install or an upgrade?"
msgstr "Er det en installasjon eller en oppgradering?"

#: ../install_steps_interactive.pm_.c:67
msgid "Install"
msgstr "Installer"

#: ../install_steps_interactive.pm_.c:67
msgid "Upgrade"
msgstr "Oppgrader"

#: ../install_steps_interactive.pm_.c:76
msgid "Install Class"
msgstr "Installeringsklasse"

#: ../install_steps_interactive.pm_.c:77
msgid "What type of user will you have?"
msgstr "Hva slags brukertype vil du ha?"

#: ../install_steps_interactive.pm_.c:87
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Du må starte maskinen på nytt for at modifiseringene av partisjonstabellen "
"skal tre i kraft"

#: ../install_steps_interactive.pm_.c:99
msgid "Choose the partitions you want to format"
msgstr "Velg de partisjonene du ønsker å formatere"

#: ../install_steps_interactive.pm_.c:110
#, c-format
msgid "Formatting partition %s"
msgstr "Formaterer partisjon %s"

#: ../install_steps_interactive.pm_.c:123
msgid "Keep the current IP configuration"
msgstr "Behold nåværende IP-konfigurasjon"

#: ../install_steps_interactive.pm_.c:124
msgid "Reconfigure network now"
msgstr "Rekonfigurer nettverket nå"

#: ../install_steps_interactive.pm_.c:125
msgid "Don't set up networking"
msgstr "Ikke sett opp nettverk"

#: ../install_steps_interactive.pm_.c:127
#: ../install_steps_interactive.pm_.c:133
msgid "Network Configuration"
msgstr "Nettverks-konfigurasjon"

#: ../install_steps_interactive.pm_.c:128
msgid "LAN networking has already been configured. Do you want to:"
msgstr "LAN nettverket har allerede blitt konfigurert. Vil du:"

#: ../install_steps_interactive.pm_.c:134
msgid ""
"Do you want to configure LAN (not dialup) networking for your installed "
"system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:353
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"lilo on your system, or another operating system removes lilo, or lilo "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:361
msgid "Sorry, no floppy drive available"
msgstr ""

#: ../install_steps_interactive.pm_.c:364
#, fuzzy
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Velg de partisjonene du ønsker å formatere"

#: ../install_steps_interactive.pm_.c:368
#, c-format
msgid "Insert a floppy in drive %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:369
#, fuzzy
msgid "Creating bootdisk"
msgstr "Opprett oppstartdiskett"

#: ../install_steps_interactive.pm_.c:375
msgid "First sector of boot partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:375
msgid "First sector of drive"
msgstr ""

#: ../install_steps_interactive.pm_.c:378
#, fuzzy
msgid "Lilo Installation"
msgstr "Installerer"

#: ../install_steps_interactive.pm_.c:379
#, fuzzy
msgid "Where do you want to install the bootloader?"
msgstr "Hvor vil du montere %s enheten?"

#: ../install_steps_interactive.pm_.c:389
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"For information on fixes which are available for this release of Linux "
"Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux Mandrake User's Guide."
msgstr ""

#: ../install_steps_interactive.pm_.c:402
#, fuzzy, c-format
msgid "What %s card have you?"
msgstr "Hva slags scsi-kort har du?"

#: ../install_steps_interactive.pm_.c:406
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""

#: ../install_steps_interactive.pm_.c:411
msgid "Autoprobe"
msgstr ""

#: ../install_steps_interactive.pm_.c:411
msgid "Specify options"
msgstr ""

#: ../install_steps_interactive.pm_.c:414
#, c-format
msgid ""
"Here must give the different options for the module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For example you can have ``io=0x300 irq=7''"
msgstr ""

#: ../install_steps_interactive.pm_.c:417
msgid "Module options:"
msgstr ""

#: ../install_steps_interactive.pm_.c:429
#, fuzzy, c-format
msgid "Installing driver for %s card %s"
msgstr "Installerer driver for scsi-kort %s"

#: ../install_steps_interactive.pm_.c:430
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: ../install_steps_interactive.pm_.c:443
#, fuzzy, c-format
msgid "Found %s %s interfaces"
msgstr " scsi grensesnitt"

#: ../install_steps_interactive.pm_.c:444
msgid "Do you have another one?"
msgstr "Har du enda ett?"

#: ../install_steps_interactive.pm_.c:445
#, fuzzy, c-format
msgid "Do you have an %s interface?"
msgstr "Har du et scsi grensesnitt"

#: ../install_steps_stdio.pm_.c:21
#, c-format
msgid "Starting step `%s'\n"
msgstr "Starter steg `%s'\n"

#: ../interactive.pm_.c:41 ../interactive.pm_.c:51 ../my_gtk.pm_.c:174
#: ../my_gtk.pm_.c:316 ../my_gtk.pm_.c:390
msgid "Ok"
msgstr "Ok"

#: ../interactive.pm_.c:46 ../my_gtk.pm_.c:315
msgid "No"
msgstr "Nei"

#: ../interactive.pm_.c:46 ../my_gtk.pm_.c:315
msgid "Yes"
msgstr "Ja"

#: ../interactive.pm_.c:51 ../my_gtk.pm_.c:175 ../my_gtk.pm_.c:316
msgid "Cancel"
msgstr "Avbryt"

#: ../interactive.pm_.c:116
msgid "Please wait"
msgstr "Vennligst vent"

#: ../interactive_stdio.pm_.c:34
#, fuzzy, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Tvetydig (%s) vær mere presis\n"

#: ../interactive_stdio.pm_.c:35 ../interactive_stdio.pm_.c:50
#: ../interactive_stdio.pm_.c:69
msgid "Bad choice, try again\n"
msgstr "Dårlig valg, prøv igjen\n"

#: ../interactive_stdio.pm_.c:38
#, c-format
msgid " ? (default %s) "
msgstr " ? (standard %s) "

#: ../interactive_stdio.pm_.c:51
#, c-format
msgid "Your choice? (default %s) "
msgstr "Ditt valg? (standard %s) "

#: ../interactive_stdio.pm_.c:70
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Ditt valg? (standard %s  trykk `none' for ingen) "

#: ../keyboard.pm_.c:26
msgid "Belgian"
msgstr ""

#: ../keyboard.pm_.c:27
msgid "Bulgarian"
msgstr ""

#: ../keyboard.pm_.c:28
msgid "Czech"
msgstr ""

#: ../keyboard.pm_.c:29
msgid "German"
msgstr ""

#: ../keyboard.pm_.c:30
msgid "Danish"
msgstr ""

#: ../keyboard.pm_.c:31
msgid "Dvorak"
msgstr ""

#: ../keyboard.pm_.c:32
msgid "Finnish"
msgstr ""

#: ../keyboard.pm_.c:33
msgid "French"
msgstr ""

#: ../keyboard.pm_.c:37
msgid "Greek"
msgstr ""

#: ../keyboard.pm_.c:38
msgid "Hungarian"
msgstr ""

#: ../keyboard.pm_.c:39
#, fuzzy
msgid "Israelian"
msgstr "Installerer"

#: ../keyboard.pm_.c:40
msgid "Icelandic"
msgstr ""

#: ../keyboard.pm_.c:41
#, fuzzy
msgid "Italian"
msgstr "Installerer"

#: ../keyboard.pm_.c:42
msgid "Latin American"
msgstr ""

#: ../keyboard.pm_.c:43
msgid "Dutch"
msgstr ""

#: ../keyboard.pm_.c:44
msgid "Norwegian"
msgstr ""

#: ../keyboard.pm_.c:45
msgid "Polish"
msgstr ""

#: ../keyboard.pm_.c:46
msgid "Portuguese"
msgstr ""

#: ../keyboard.pm_.c:47
msgid "Canadian (Quebec)"
msgstr ""

#: ../keyboard.pm_.c:48
msgid "Russian"
msgstr ""

#: ../keyboard.pm_.c:49
msgid "Swedish"
msgstr ""

#: ../keyboard.pm_.c:50
msgid "Swiss (french layout)"
msgstr ""

#: ../keyboard.pm_.c:51
msgid "Swiss (german layout)"
msgstr ""

#: ../keyboard.pm_.c:52
msgid "Slovenian"
msgstr ""

#: ../keyboard.pm_.c:53
msgid "Slovakian"
msgstr ""

#: ../keyboard.pm_.c:56
msgid "Turkish (traditional \"F\" model)"
msgstr ""

#: ../keyboard.pm_.c:57
msgid "Turkish (modern \"Q\" model)"
msgstr ""

#: ../keyboard.pm_.c:58
msgid "UK keyboard"
msgstr ""

#: ../keyboard.pm_.c:59
msgid "US keyboard"
msgstr ""

#: ../keyboard.pm_.c:60
msgid "Yugoslavian (latin layout)"
msgstr ""

#: ../my_gtk.pm_.c:316
msgid "Is it ok?"
msgstr "Er det ok?"

#: ../partition_table.pm_.c:459
#, c-format
msgid "Error reading file %s"
msgstr "Feil ved lesing av fil %s"

#: ../partition_table.pm_.c:466
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Gjenoppretting fra fil %s mislykket: %s"

#: ../partition_table.pm_.c:468
msgid "Bad backup file"
msgstr "Dårlig backup-fil"

#: ../partition_table.pm_.c:488
#, c-format
msgid "Error writing to file %s"
msgstr "Feil ved skriving til fil %s"

#~ msgid "Found "
#~ msgstr "Funnet "

#~ msgid "Give your graphic card memory size"
#~ msgstr "Oppgi hvor mye minne grafikk-kortet ditt har"

#~ msgid ""
#~ "You're adding a root partition far on the drive (on a cylinder > 1024),\n"
#~ "and you have no /boot partition. So if you plan to use lilo (the boot "
#~ "manager),\n"
#~ "be careful to add a /boot partition"
#~ msgstr ""
#~ "Du er i ferd med å legge til en rotpartisjon langt ute på disken (på en\n"
#~ "sylinder > 1024), og du har ingen /boot partisjon. Så hvis du planlegger å "
#~ "bruke lilo (oppstartshåndtereren), så være forsiktig når du legger til\n"
#~ "en /boot partisjon."

#, fuzzy
#~ msgid "Configure services"
#~ msgstr "Konfigurer X"

#~ msgid ""
#~ "Choose the language which you approved. This one govern the language's "
#~ "system."
#~ msgstr "Velg språket som du godkjente. Dette bestemmer språket på systemet."

#~ msgid ""
#~ "In this stage, you will must partion your hard disk. It consists in cutting "
#~ "your disk in several zones\n"
#~ "(which are not equal). This operation, for spectacular and intimidating that "
#~ "it is,\n"
#~ " is not hardly if you be carrefull so that you do. \n"
#~ "Also, take your time, are sure you before click on \"Finishing\" and READ "
#~ "the handbook of DiskDrake\n"
#~ "before use them."
#~ msgstr ""
#~ "På dette punktet må du partisjonere hard-disken din. Det består av å dele "
#~ "opp disken din i flere soner\n"
#~ "(som ikke er like). Denne operasjonen, uansett hvor spektakulært "
#~ "ogskremmende det måtte være,\n"
#~ "så er det ikke vanskelig hvis du er forsiktig med det du gjør. \n"
#~ "Ta deg god tid, og vær sikker før du klikker på \"Ferdig\" og LES "
#~ "DiskDrake-håndboken\n"
#~ "før du begynner."

#~ msgid ""
#~ "The system now requires an administrator password for your Linux system.\n"
#~ "This passwd is required of you by twice in order to being certain of its "
#~ "spelling.\n"
#~ "\n"
#~ "Choose it carefully because it mainly conditions the good functioning of "
#~ "your system.\n"
#~ "Indeed, only the administrator (also named \"root\") is able to configure "
#~ "the computer.\n"
#~ "The password should not be too simple so that whoever cannot be connected "
#~ "under this account.\n"
#~ "It should not be either too sophisticated under penalty of being difficult "
#~ "to retain and, finally, forgotten.\n"
#~ "\n"
#~ "When you wish to connect yourselves on your Linux system as an "
#~ "administrator, the \"login\" \n"
#~ "is \"root\" and the \"password\", this one which you now will indicate."
#~ msgstr ""
#~ "Systemet krever nå et administrator-passord for Linux-systemet ditt.\n"
#~ "Passordet må oppgis to ganger for å bekrefte at stavingen er riktig.\n"
#~ "\n"
#~ "Velg det med omhu fordi det i hovedsak bestemmer for godt systemet vil "
#~ "fungere.\n"
#~ "Også fordi bare administratoren (også kalt \"root\") er i stand til å "
#~ "konfigurere datamaskinen din.\n"
#~ "Passordet burde ikke være for enkelt så andre ikke kan logge seg på denne "
#~ "kontoen.\n"
#~ "Det burde heller ikke være for innviklet så det er vanskelig å huske, eller "
#~ "i verste fall bli glemt.\n"
#~ "\n"
#~ "Ønsker du å logge deg på Linux-systemet ditt som administrator, så er \"logg "
#~ "inn\" \n"
#~ "\"root\" og \"passord\", som du nå vil opprette."

#~ msgid ""
#~ "You can now authorize one or more people to be connected on your Linux "
#~ "system. Each one of\n"
#~ "them will profit from his own environment will be able to configure.\n"
#~ "\n"
#~ "It is very important that you create at least one user even if you are the "
#~ "only person who will connect\n"
#~ "herself on this machine. Indeed, if runnig the system as \"root\" is "
#~ "attractive, that \n"
#~ "is a very bad idea. This last having all the rights it is certain that at "
#~ "one time you will broke all.\n"
#~ "This is highly preferable you connect as simple user and that you use the "
#~ "account \"root\" only when\n"
#~ "that is essential."
#~ msgstr ""
#~ "Du kan nå gi autorisasjon til å la en eller brukere logge seg på Linux- "
#~ "systemet ditt. Være av dem\n"
#~ "vil være i stand til å konfigurere sitt eget miljø.\n"
#~ "\n"
#~ "Det er veldig viktig at du oppretter minst en bruker selv om du er den "
#~ "eneste personen som vil\n"
#~ "bruke denne maskinen. Selv om det å kjøre systemet som \"root\" er "
#~ "attraktivt, så er det en \n"
#~ "veldig dårlig ide. Da denne har alle rettigheter er det sikkert at før eller "
#~ "senere vil du ødelegge alt.\n"
#~ "Det her høyt anbefalt at du logger deg på som vanlig bruker og kun bruker "
#~ "kontoen \"root\" når det er nødvendig."

#~ msgid ""
#~ "It is now time to configure the graphic server. First of all, choose your "
#~ "monitor. You have then\n"
#~ "the possibility of testing your configuration and of reconsidering your "
#~ "choices if the latter are not\n"
#~ "appropriate to you."
#~ msgstr ""
#~ "Det er nå tid for å konfigurere grafikk-tjeneren. Først, velg monitor. Du "
#~ "har så muligheten\n"
#~ "til å teste konfigurasjonen din og endre dine valg hvis disse valgene ikke "
#~ "passet for deg."