# Drakbootdisk Japanese translation # Copyright (C) 2000 Free Software Foundation, Inc. # YAMAGATA Hiroo , 2000. # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2002-12-05 19:52+0100\n" "PO-Revision-Date: 2000-07-05 15:44+0200\n" "Last-Translator: YAMAGATA Hiroo \n" "Language-Team: Japanese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=euc-jp\n" "Content-Transfer-Encoding: 8bit\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 KB" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 KB" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB 以上" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "X サーバを選んで下さい" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X サーバ" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "マルチヘッド設定" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "あなたのシステムはマルチヘッドの設定ができます。\n" "どうしますか？" #: ../../Xconfig/card.pm_.c:288 msgid "Select the memory size of your graphics card" msgstr "グラフィックカードのメモリサイズを選択して下さい" #: ../../Xconfig/card.pm_.c:349 msgid "XFree configuration" msgstr "XFreeの設定" #: ../../Xconfig/card.pm_.c:351 msgid "Which configuration of XFree do you want to have?" msgstr "どの構成のXFree にしますか" #: ../../Xconfig/card.pm_.c:383 msgid "Configure all heads independently" msgstr "ヘッドをそれぞれ独立に設定" #: ../../Xconfig/card.pm_.c:384 msgid "Use Xinerama extension" msgstr "Xinerama 拡張を使う" #: ../../Xconfig/card.pm_.c:389 #, c-format msgid "Configure only card \"%s\"%s" msgstr "以下のカードだけを設定：\"%s\"%s" #: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "ハードウェア3DアクセラレーションつきのXFree %s" #: ../../Xconfig/card.pm_.c:416 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "このカードはXFree %s でのみ3Dアクセラレーション可能です。\n" "XFree %s でのこのカードのサポートは、2D のほうがすぐれています。" #: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "このカードはXFree %s で3Dアクセラレーション可能です。" #: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "実験段階のハードウェア3DアクセラレーションつきのXFree %s" #: ../../Xconfig/card.pm_.c:429 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "このカードはハード3Dアクセラレーションが可能ですが、XFree %sが必要です。\n" "ただしあくまで、実験的なサポートで、マシンフリーズの可能性があります。\n" "XFree %s でのこのカードのサポートは、2D のほうがすぐれています。" #: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "このカードはXFree %s で3Dアクセラレーション可能です。\n" "ただしあくまで、実験的なサポートで、マシンフリーズの可能性があります。" #: ../../Xconfig/card.pm_.c:455 msgid "Xpmac (installation display driver)" msgstr "Xpmac (インストールディスプレイドライバ)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961 msgid "Custom" msgstr "カスタム" #: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "グラフィックカード" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "モニタ" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210 msgid "Resolution" msgstr "解像度" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "テスト" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "オプション" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269 #: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181 #: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015 #: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435 #: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949 msgid "Ok" msgstr "OK" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114 #: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204 msgid "Quit" msgstr "終了" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "変更を保存しますか?\n" "現在の設定は以下の通りです:\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "モニタを選んで下さい" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "プラグ＆プレイ" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "汎用" #: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67 #: ../../standalone/harddrake2_.c:68 msgid "Vendor" msgstr "ベンダー" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "プラグ＆プレイのプローブ失敗。手動でモニタを選んでください" #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "大事なパラメータが2つあります。垂直リフレッシュレート(スクリーン全体\n" "を再描画する周期)と水平リフレッシュレート(走査線の表示周期，もっとも\n" "重要)です。\n" "\n" "*重要* モニタの許容範囲内の垂直，水平同期範囲を指定しないと，\n" "モニタがダメージを受けるかも知れません。\n" "分からない場合は, 低めの設定にして下さい。" #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "水平リフレッシュレート" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "垂直リフレッシュレート" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 色(8 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "3万2千色 (15 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "6万5千色 (16 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "1600万色 (24 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "40億色 (32 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:130 msgid "Resolutions" msgstr "解像度" #: ../../Xconfig/resolution_and_depth.pm_.c:255 msgid "Choose the resolution and the color depth" msgstr "解像度と色深度" #: ../../Xconfig/resolution_and_depth.pm_.c:256 #, c-format msgid "Graphics card: %s" msgstr "グラフィックカード: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001 #: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055 #: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198 #: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907 #: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047 #: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104 #: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112 #: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286 #: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677 #: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918 #: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204 #: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295 #: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438 #: ../../ugtk2.pm_.c:926 msgid "Cancel" msgstr "キャンセル" #: ../../Xconfig/test.pm_.c:29 msgid "Test of the configuration" msgstr "設定を試します" #: ../../Xconfig/test.pm_.c:30 msgid "Do you want to test the configuration?" msgstr "この設定で試してみますか？" #: ../../Xconfig/test.pm_.c:30 msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "警告：このグラフィックカードをテストするとマシンがフリーズするかもしれません" #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "キーボードレイアウト: %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "マウスの種類: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "マウスデバイス: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "モニタ: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "モニタ水平同期: %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "モニタ垂直リフレッシュ: %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "グラフィックカード: %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "グラフィックメモリ: %s kB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "色深度: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "解像度: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 サーバ: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86 ドライバ: %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "X の起動" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "コンピュータをブートした時，自動的に X が立ち上がる設定にできます。\n" "リブートした時 X を立ち上げますか？" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "あなたのビデオカードは、TV-OUT コネクタがついているようです。\n" "フレームバッファを使って動くように設定できますよ。\n" "\n" "これをやるには、コンピュータを起動する前にビデオカードをテレビにつないでくだ" "さい。\n" "それからブートローダで \"TVout\" を選んでください。\n" "\n" "この機能がありますか？" #: ../../Xconfig/various.pm_.c:85 msgid "What norm is your TV using?" msgstr "テレビの画像方式は何ですか？" #: ../../any.pm_.c:107 ../../any.pm_.c:132 msgid "First sector of boot partition" msgstr "ブートパーティションの最初のセクタ" #: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209 msgid "First sector of drive (MBR)" msgstr "ドライブの最初のセクタ (MBR)" #: ../../any.pm_.c:111 msgid "SILO Installation" msgstr "SILO のインストール" #: ../../any.pm_.c:112 ../../any.pm_.c:125 msgid "Where do you want to install the bootloader?" msgstr "ブートローダをどこにインストールしますか？" #: ../../any.pm_.c:124 msgid "LILO/grub Installation" msgstr "LILO/grub のインストール" #: ../../any.pm_.c:136 ../../any.pm_.c:150 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:138 msgid "LILO with text menu" msgstr "テキストメニュー版 LILO" #: ../../any.pm_.c:139 ../../any.pm_.c:150 msgid "LILO with graphical menu" msgstr "グラフィックメニュー版 LILO" #: ../../any.pm_.c:142 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:146 msgid "Boot from DOS/Windows (loadlin)" msgstr "DOS/Windowsから起動 (loadlin 使用)" #: ../../any.pm_.c:148 ../../any.pm_.c:150 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:158 ../../any.pm_.c:189 msgid "Bootloader main options" msgstr "ブートローダのメインオプション" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader to use" msgstr "使用するブートローダ" #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "ブートローダのインストール" #: ../../any.pm_.c:163 ../../any.pm_.c:192 msgid "Boot device" msgstr "ブートデバイス" #: ../../any.pm_.c:164 msgid "Compact" msgstr "コンパクト" #: ../../any.pm_.c:164 msgid "compact" msgstr "コンパクト" #: ../../any.pm_.c:165 ../../any.pm_.c:289 msgid "Video mode" msgstr "ビデオモード" #: ../../any.pm_.c:167 msgid "Delay before booting default image" msgstr "デフォルトイメージ起動の待ち時間" #: ../../any.pm_.c:169 ../../any.pm_.c:772 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71 #: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916 #: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622 #: ../../standalone/drakconnect_.c:647 msgid "Password" msgstr "パスワード" #: ../../any.pm_.c:170 ../../any.pm_.c:773 #: ../../install_steps_interactive.pm_.c:1078 msgid "Password (again)" msgstr "パスワード (もう一度)" #: ../../any.pm_.c:171 msgid "Restrict command line options" msgstr "コマンドラインオプションの制限" #: ../../any.pm_.c:171 msgid "restrict" msgstr "制限" #: ../../any.pm_.c:173 msgid "Clean /tmp at each boot" msgstr "各ブート時に /tmp 以下を消す" # added a \n to the translation to avoid that the dialog window # in which it appears to be tooooo laaaaarge #: ../../any.pm_.c:174 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" "必要なら正確なRAMサイズを入れてください\n" "（%d MBが見つかりました）" #: ../../any.pm_.c:176 msgid "Enable multi profiles" msgstr "マルチプロファイルを有効に" #: ../../any.pm_.c:180 msgid "Give the ram size in MB" msgstr "RamサイズをMBで入力" #: ../../any.pm_.c:182 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "“コマンドラインオプションの制限”オプションはパスワードがないと\n" "役にたちません。" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../diskdrake/interactive.pm_.c:1204 #: ../../install_steps_interactive.pm_.c:1072 msgid "Please try again" msgstr "もう一度試して下さい" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../install_steps_interactive.pm_.c:1072 msgid "The passwords do not match" msgstr "パスワードが一致しません" #: ../../any.pm_.c:191 msgid "Init Message" msgstr "初期化メッセージ" #: ../../any.pm_.c:193 msgid "Open Firmware Delay" msgstr "オープンファームウェアのディレイ" #: ../../any.pm_.c:194 msgid "Kernel Boot Timeout" msgstr "カーネルブートのタイムアウト" #: ../../any.pm_.c:195 msgid "Enable CD Boot?" msgstr "CD からの起動を有効にしますか？" #: ../../any.pm_.c:196 msgid "Enable OF Boot?" msgstr "OF からの起動を有効にしますか？" #: ../../any.pm_.c:197 msgid "Default OS?" msgstr "デフォルトの OS は？" #: ../../any.pm_.c:231 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "ブートローダをパーティションにインストールすることにしましたね。\n" "これは起動ハードディスクにすでにブートローダ（システムコマンダーなどがあると" "いう意味だと理解します。\n" "\n" "どのドライブから起動しますか？" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "エントリは以下のとおりです。\n" "追加・変更できます。" #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531 #: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953 #: ../../standalone/drakfont_.c:996 msgid "Add" msgstr "追加" #: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726 msgid "Done" msgstr "終了" #: ../../any.pm_.c:257 msgid "Modify" msgstr "変更" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "どのタイプを追加しますか" #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "他の OS (SunOSなど...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "他の OS (MacOSなど...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "他の OS (ウィンドウズなど...)" #: ../../any.pm_.c:285 msgid "Image" msgstr "イメージ" #: ../../any.pm_.c:286 ../../any.pm_.c:297 msgid "Root" msgstr "ルート" #: ../../any.pm_.c:287 ../../any.pm_.c:315 msgid "Append" msgstr "追加" #: ../../any.pm_.c:291 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:292 msgid "Read-write" msgstr "読み書き" #: ../../any.pm_.c:299 msgid "Table" msgstr "テーブル" #: ../../any.pm_.c:300 msgid "Unsafe" msgstr "危険" #: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314 msgid "Label" msgstr "ラベル" #: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215 msgid "Default" msgstr "デフォルト" #: ../../any.pm_.c:316 msgid "Initrd-size" msgstr "Initrdサイズ" #: ../../any.pm_.c:318 msgid "NoVideo" msgstr "ビデオなし" #: ../../any.pm_.c:326 msgid "Remove entry" msgstr "エントリを消す" #: ../../any.pm_.c:329 msgid "Empty label not allowed" msgstr "空白のラベルは許されていません" #: ../../any.pm_.c:330 msgid "You must specify a kernel image" msgstr "カーネルイメージを指定してください" #: ../../any.pm_.c:330 msgid "You must specify a root partition" msgstr "rootパーティションは必ず指定してください" #: ../../any.pm_.c:331 msgid "This label is already used" msgstr "このラベルはすでに使われています" #: ../../any.pm_.c:640 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s インターフェースが見つかりました" #: ../../any.pm_.c:641 msgid "Do you have another one?" msgstr "別のものはありますか？" #: ../../any.pm_.c:642 #, c-format msgid "Do you have any %s interfaces?" msgstr "%s インターフェースはありますか？" #: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925 msgid "No" msgstr "いいえ" #: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258 #: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267 #: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925 msgid "Yes" msgstr "はい" #: ../../any.pm_.c:645 msgid "See hardware info" msgstr "ハードウェアの情報を見て下さい" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:662 #, c-format msgid "Installing driver for %s card %s" msgstr "%s カード %s のドライバインストール中" #: ../../any.pm_.c:663 #, c-format msgid "(module %s)" msgstr "(モジュール %s)" #: ../../any.pm_.c:674 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "ではモジュール %s のオプションを指定してください。\n" "なお、アドレスはすべて、頭に 0x をつけて入力すること。例： '0x123'" #: ../../any.pm_.c:680 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "モジュール %s へのオプションの指定。\n" "オプションのフォーマットは“名前=値 名前2=値2 ...”です。\n" "例: “io=0x300 irq=7”" #: ../../any.pm_.c:682 msgid "Module options:" msgstr "モジュールのオプション" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:694 #, c-format msgid "Which %s driver should I try?" msgstr "どの %s ドライバを試しましょうか？" #: ../../any.pm_.c:703 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "%s ドライバは、正しく動作するのに特別な情報が要る場合があります。ただし\n" "ふつうは、なにもなしで正常に動く場合がほとんどです。特別なオプションを\n" "指定しますか？　それともドライバにマシンをプローブさせて必要情報を取得\n" "させてみますか？　プローブ中にコンピュータが停止するかも知れませんが，\n" "マシンがこわれたりすることはありません。" #: ../../any.pm_.c:707 msgid "Autoprobe" msgstr "オートプローブ" #: ../../any.pm_.c:707 msgid "Specify options" msgstr "オプション指定" #: ../../any.pm_.c:719 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "モジュール %s のロードができませんでした。\n" "パラメータを変えてやりなおしてみますか？" #: ../../any.pm_.c:734 msgid "access to X programs" msgstr "X プログラムへのアクセス" #: ../../any.pm_.c:735 msgid "access to rpm tools" msgstr "rpm ツールへのアクセス" #: ../../any.pm_.c:736 msgid "allow \"su\"" msgstr "“su”を許す" #: ../../any.pm_.c:737 msgid "access to administrative files" msgstr "管理ファイルへのアクセス" #: ../../any.pm_.c:738 msgid "access to network tools" msgstr "ネットワークツールへのアクセス" #: ../../any.pm_.c:739 msgid "access to compilation tools" msgstr "コンパイルツールへのアクセス" #: ../../any.pm_.c:744 #, c-format msgid "(already added %s)" msgstr "(%s は追加済み)" #: ../../any.pm_.c:749 msgid "This password is too simple" msgstr "パスワードが簡単すぎます" #: ../../any.pm_.c:750 msgid "Please give a user name" msgstr "ユーザ名を与えて下さい" #: ../../any.pm_.c:751 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "ユーザ名には英小文字，数字、「-」や「_」しか使えません。" #: ../../any.pm_.c:752 msgid "The user name is too long" msgstr "このユーザ名は長すぎます" #: ../../any.pm_.c:753 msgid "This user name is already added" msgstr "このユーザ名はすでに存在します" #: ../../any.pm_.c:757 msgid "Add user" msgstr "ユーザを追加" #: ../../any.pm_.c:758 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "ユーザ名を入力して下さい\n" "%s" #: ../../any.pm_.c:759 msgid "Accept user" msgstr "ユーザを受け付ける" #: ../../any.pm_.c:770 msgid "Real name" msgstr "実際の氏名" #: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802 #: ../../printer/printerdrake.pm_.c:915 msgid "User name" msgstr "ユーザ名" #: ../../any.pm_.c:774 msgid "Shell" msgstr "シェル" #: ../../any.pm_.c:776 msgid "Icon" msgstr "アイコン" #: ../../any.pm_.c:803 msgid "Autologin" msgstr "自動ログイン" #: ../../any.pm_.c:804 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "自動的に特定ユーザがログオンするようにコンピュータを設定できます。\n" "この機能を使いますか？" #: ../../any.pm_.c:808 msgid "Choose the default user:" msgstr "デフォルトユーザの選択:" #: ../../any.pm_.c:809 msgid "Choose the window manager to run:" msgstr "使うウィンドウマネージャを選んで下さい：" #: ../../any.pm_.c:824 msgid "Please choose a language to use." msgstr "どの言語を使うか選んでくださいね。" #: ../../any.pm_.c:826 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "インストール後使用可能になるほかの言語を選択できます" #: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697 #: ../../standalone/drakxtv_.c:70 msgid "All" msgstr "ぜんぶ" #: ../../any.pm_.c:961 msgid "Allow all users" msgstr "すべてのユーザを認める" #: ../../any.pm_.c:961 msgid "No sharing" msgstr "ファイル共有しない" #: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "パッケージ %s が必要です。インストールしますか？" #: ../../any.pm_.c:973 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "エクスポートには NFS か Samba が使えます。どちらにしますか？" #: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190 #, c-format msgid "Mandatory package %s is missing" msgstr "必要パッケージ %s がありません" #: ../../any.pm_.c:987 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "ユーザ同士がディレクトリの一部を共有できるようにしますか?\n" "こうすると、ユーザたちはkonquerorやnautilusで「共有」をクリックするだけですみ" "ます。\n" "\n" "「カスタム」はユーザごとに細かい設定ができます。\n" #: ../../any.pm_.c:1001 msgid "Launch userdrake" msgstr "userdrake を起動" #: ../../any.pm_.c:1003 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "ユーザ毎の共有は、“fileshare”グループを使います。\n" "このグループにユーザを追加するには、userdrake が使えますよ。" #: ../../any.pm_.c:1053 ../../security/level.pm_.c:7 msgid "Welcome To Crackers" msgstr "悪質なクラッカー様も侵入しほうだい" #: ../../any.pm_.c:1054 ../../security/level.pm_.c:8 msgid "Poor" msgstr "きわめて低い" #: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9 msgid "Standard" msgstr "標準" #: ../../any.pm_.c:1056 ../../security/level.pm_.c:10 msgid "High" msgstr "高い" #: ../../any.pm_.c:1057 ../../security/level.pm_.c:11 msgid "Higher" msgstr "もっと高い" #: ../../any.pm_.c:1058 ../../security/level.pm_.c:12 msgid "Paranoid" msgstr "神経質なほど高水準" #: ../../any.pm_.c:1061 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "このレベルを使うなら注意が必要です。システムを使うのは簡単になりますが、\n" "だれにでもアクセスできてしまいます。他のマシンやインターネット\n" "につながったマシンでは使わないでください。パスワード制限もありません。" #: ../../any.pm_.c:1064 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "パスワードが有効になりましたが、ネットワークにつなぐのはまだ\n" "お奨めできません。" #: ../../any.pm_.c:1065 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "これは標準のセキュリティで、クライアントとしてインターネット接続するマシンで" "の推奨レベルです。" #: ../../any.pm_.c:1066 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "すでに制限がかかっていて、さらに毎晩自動チェックがもっとかかります。" #: ../../any.pm_.c:1067 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "このセキュリティレベルだと、システムをサーバとして使えるようになります。\n" "多数のクライアントから接続を受けるサーバとしても使えるだけのセキュリティ\n" "水準になっています。註：あなたのマシンがインターネット上のクライアント専用な" "ら、もっと低いレベルを選んだほうがいいですよ。" #: ../../any.pm_.c:1070 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "前のレベルに基づいていますが、これでシステムは完全にとじた状態\n" "になっています。セキュリティは最大です。" #: ../../any.pm_.c:1076 msgid "DrakSec Basic Options" msgstr "DrakSec基本オプション" #: ../../any.pm_.c:1077 msgid "Please choose the desired security level" msgstr "セキュリティの水準を選んでください" #: ../../any.pm_.c:1080 msgid "Security level" msgstr "セキュリティ水準" #: ../../any.pm_.c:1082 msgid "Use libsafe for servers" msgstr "サーバにlibsafeを使う" #: ../../any.pm_.c:1083 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "バッファオーバーフローやフォーマットストリング攻撃を防御するライブラリ。" #: ../../any.pm_.c:1084 msgid "Security Administrator (login or email)" msgstr "セキュリティ管理者（ログインか電子メール）" #: ../../any.pm_.c:1166 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "ここでは、各種のキーボード配列間（例：ラテンと非ラテン）を\n" "切り替えるキーの組み合わせを選べます。" # NOTE: this message will be displayed by SILO at boot time; that is # only the ascii charset will be available # so use only 7bit for this message # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:436 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "%s operating system chooser-he youkosou!\n" "\n" "Ichiran kara erande wo oshimasu. %d byou de Default ni narimasu.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:983 msgid "Welcome to GRUB the operating system chooser!" msgstr "GRUB operating system chooser-he youkosou!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:986 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "%c, %c key wo tukatte entry wo shitei shite kudasai." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Kono OS wo kidou suru nara Enter, Kidou mae no jikkou command" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 msgid "commands before booting, or 'c' for a command-line." msgstr "no henshuu niha 'e', command line nara 'c' wo oshi masu." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "Sentaku shita OS ga %d byou de jidoutekini kidou shimasu." #: ../../bootloader.pm_.c:999 msgid "not enough room in /boot" msgstr "/boot の容量不足です" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1099 msgid "Desktop" msgstr "デスクトップ" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1101 msgid "Start Menu" msgstr "スタートメニュー" #: ../../bootloader.pm_.c:1120 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "ブートローダは %s パーティションにはインストールできません\n" #: ../../bootlook.pm_.c:53 msgid "Boot Style Configuration" msgstr "起動方式の設定" #: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54 #: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82 #: ../../standalone/logdrake_.c:74 msgid "/_File" msgstr "/ファイル(_F)" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/logdrake_.c:80 msgid "/File/_Quit" msgstr "/ファイル(F)/終了(_Q)" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:82 msgid "NewStyle Categorizing Monitor" msgstr "新スタイルに分類されるモニタ" #: ../../bootlook.pm_.c:83 msgid "NewStyle Monitor" msgstr "新スタイルモニタ" #: ../../bootlook.pm_.c:84 msgid "Traditional Monitor" msgstr "ふつうのモニタ" #: ../../bootlook.pm_.c:85 msgid "Traditional Gtk+ Monitor" msgstr "ふつうの Gtk+ モニタ" #: ../../bootlook.pm_.c:86 msgid "Launch Aurora at boot time" msgstr "起動時にAuroraを実行" #: ../../bootlook.pm_.c:89 msgid "Lilo/grub mode" msgstr "Lilo/grub モード" #: ../../bootlook.pm_.c:89 msgid "Yaboot mode" msgstr "Yaboot モード" #: ../../bootlook.pm_.c:138 msgid "Install themes" msgstr "テーマの導入" #: ../../bootlook.pm_.c:139 msgid "" "Display theme\n" "under console" msgstr "" "コンソールで\n" "テーマを表示" #: ../../bootlook.pm_.c:140 msgid "Create new theme" msgstr "新しいテーマを作成" #: ../../bootlook.pm_.c:184 #, c-format msgid "Backup %s to %s.old" msgstr "%s を %s.old にバックアップ" #: ../../bootlook.pm_.c:187 #, c-format msgid "Copy %s to %s" msgstr "%s を%sにコピー中" #: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224 #: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119 #: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352 #: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481 #: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21 msgid "Error" msgstr "エラー" #: ../../bootlook.pm_.c:192 msgid "Lilo message not found" msgstr "liloメッセージが見つかりません" #: ../../bootlook.pm_.c:222 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "/etc/sysconfig/bootsplashが書けません" #: ../../bootlook.pm_.c:222 #, c-format msgid "Write %s" msgstr "%sを書き込む" #: ../../bootlook.pm_.c:224 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "/etc/sysconfig/bootsplashが書き込めません\n" "ファイルが見つかりません。" #: ../../bootlook.pm_.c:235 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "mkinitrd -f /boot/initrd-%s.img %sを起動できません。" #: ../../bootlook.pm_.c:238 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "mkinitrd -f /boot/initrd-%s.img %sをinitrdにする" #: ../../bootlook.pm_.c:244 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "LiLoを再実行できません！\n" "Liloテーマのインストールを完了するにはrootになって「lilo」を実行します。" #: ../../bootlook.pm_.c:248 msgid "Relaunch 'lilo'" msgstr "liloを再実行します" #: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156 #: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449 msgid "Notice" msgstr "通知" #: ../../bootlook.pm_.c:251 msgid "LiLo and Bootsplash themes installation successfull" msgstr "Liloと起動時スプラッシュテーマのインストール成功" #: ../../bootlook.pm_.c:251 msgid "Theme installation failed!" msgstr "テーマのインストール失敗！" #: ../../bootlook.pm_.c:259 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "いま、ブートマネージャには %s をお使いです。\n" "設定ウィザードを起動するには「設定」をクリックしましょう。" #: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380 #: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400 #: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551 msgid "Configure" msgstr "設定" #: ../../bootlook.pm_.c:268 msgid "Splash selection" msgstr "スプラッシュ選択" #: ../../bootlook.pm_.c:271 msgid "Themes" msgstr "テーマ" #: ../../bootlook.pm_.c:273 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" "\n" "liloと起動スプラッシュの\n" "テーマを選びましょう。\n" "両者は別々に選べます" #: ../../bootlook.pm_.c:276 msgid "Lilo screen" msgstr "lilo画面" #: ../../bootlook.pm_.c:281 msgid "Bootsplash" msgstr "起動スプラッシュ" #: ../../bootlook.pm_.c:316 msgid "System mode" msgstr "システムモード" #: ../../bootlook.pm_.c:318 msgid "Launch the graphical environment when your system starts" msgstr "起動時に X ウィンドウを実行" #: ../../bootlook.pm_.c:323 msgid "No, I don't want autologin" msgstr "自動ログインはしない" #: ../../bootlook.pm_.c:325 msgid "Yes, I want autologin with this (user, desktop)" msgstr "この (ユーザ、デスクトップ）で自動ログインする" #: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96 #: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355 #: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797 #: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137 #: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432 #: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561 #: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604 #: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911 #: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288 #: ../../ugtk2.pm_.c:355 msgid "OK" msgstr "OK" #: ../../common.pm_.c:107 msgid "GB" msgstr "GB" #: ../../common.pm_.c:107 msgid "KB" msgstr "KB" #: ../../common.pm_.c:107 msgid "MB" msgstr "MB" #: ../../common.pm_.c:115 msgid "TB" msgstr "TB" #: ../../common.pm_.c:123 #, c-format msgid "%d minutes" msgstr "あと %d 分" #: ../../common.pm_.c:125 msgid "1 minute" msgstr "あと 1 分" #: ../../common.pm_.c:127 #, c-format msgid "%d seconds" msgstr "あと %d 秒" #: ../../common.pm_.c:172 msgid "Can't make screenshots before partitioning" msgstr "パーティションを追加するまでスクリーンショットは撮れません" #: ../../common.pm_.c:179 #, c-format msgid "Screenshots will be available after install in %s" msgstr "%s のインストール後にスクリーンショットが可能です" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:127 msgid "France" msgstr "フランス" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "コスタリカ" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:130 msgid "Belgium" msgstr "ベルギー" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "チェコ共和国" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "ドイツ" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "ギリシャ" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "ノルウェー" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "スウェーデン" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:128 msgid "Netherlands" msgstr "オランダ" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65 msgid "Italy" msgstr "イタリア" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "オーストリア" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:131 msgid "United States" msgstr "アメリカ合衆国" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../diskdrake/dav.pm_.c:27 msgid "New" msgstr "新規" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "アンマウント" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "マウント" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "サーバ" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391 #: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "マウントポイント" #: ../../diskdrake/dav.pm_.c:85 msgid "Please enter the WebDAV server URL" msgstr "WavDAVサーバのURLを入力してください" #: ../../diskdrake/dav.pm_.c:88 msgid "The URL must begin with http:// or https://" msgstr "URL は http:// か https://で始まること！" #: ../../diskdrake/dav.pm_.c:109 msgid "Server: " msgstr "サーバ: " #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452 #: ../../diskdrake/interactive.pm_.c:1102 #: ../../diskdrake/interactive.pm_.c:1177 msgid "Mount point: " msgstr "マウントポイント: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183 #, c-format msgid "Options: %s" msgstr "オプション: %s" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "Please make a backup of your data first" msgstr "データのバックアップを取って下さい" #: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946 #: ../../diskdrake/interactive.pm_.c:956 #: ../../diskdrake/interactive.pm_.c:1022 msgid "Read carefully!" msgstr "よく読んで下さい！" #: ../../diskdrake/hd_gtk.pm_.c:100 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "もし aboot を使うつもりなら、ディスクの先頭に空き領域 (2048セクタくらい)\n" "を残すよう気を付けて下さい。" #: ../../diskdrake/hd_gtk.pm_.c:154 msgid "Wizard" msgstr "ウィザード" #: ../../diskdrake/hd_gtk.pm_.c:187 msgid "Choose action" msgstr "動作を選択" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "ハードディスク全体が大きな FAT パーティション一つだけですね\n" "（たぶんMS Dos/ウィンドウズのものです）。\n" "まずはこいつをリサイズするのがいいでしょう\n" "（そのパーティションをクリックして、次に「リサイズ」をクリックして下さい)" #: ../../diskdrake/hd_gtk.pm_.c:194 msgid "Please click on a partition" msgstr "変更するパーティションをクリックしてください" #: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:464 msgid "Details" msgstr "詳細" #: ../../diskdrake/hd_gtk.pm_.c:254 msgid "No hard drives found" msgstr "ハードドライブが見つかりません" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Journalised FS" msgstr "ジャーナリングファイルシステム" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Swap" msgstr "スワップ" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118 msgid "Empty" msgstr "空" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324 #: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165 #: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719 msgid "Other" msgstr "その他" #: ../../diskdrake/hd_gtk.pm_.c:330 msgid "Filesystem types:" msgstr "ファイルシステム タイプ:" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414 msgid "Create" msgstr "作成" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66 msgid "Type" msgstr "タイプ" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349 #, c-format msgid "Use ``%s'' instead" msgstr "代わりに“%s”を使って下さい" #: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401 msgid "Delete" msgstr "削除" #: ../../diskdrake/hd_gtk.pm_.c:353 msgid "Use ``Unmount'' first" msgstr "最初に「アンマウント」を使って下さい" #: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "パーティションの型を %s に変更した後、このパーティション上のデータは失われま" "す" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose a partition" msgstr "パーティションを選択" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose another partition" msgstr "別のパーティションを選ぶ" #: ../../diskdrake/interactive.pm_.c:202 msgid "Exit" msgstr "終了" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to expert mode" msgstr "エキスパートモードに移る" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to normal mode" msgstr "ノーマルモードに移る" #: ../../diskdrake/interactive.pm_.c:228 msgid "Undo" msgstr "もとに戻す" #: ../../diskdrake/interactive.pm_.c:247 msgid "Continue anyway?" msgstr "それでも続けますか？" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without saving" msgstr "セーブせず終了" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without writing the partition table?" msgstr "パーティションテーブルを更新せずに終了？" #: ../../diskdrake/interactive.pm_.c:257 msgid "Do you want to save /etc/fstab modifications" msgstr " /etc/fstab の変更を保存しますか？" #: ../../diskdrake/interactive.pm_.c:271 msgid "Clear all" msgstr "全てをクリア" #: ../../diskdrake/interactive.pm_.c:272 msgid "Auto allocate" msgstr "自動割り当て" #: ../../diskdrake/interactive.pm_.c:273 #: ../../install_steps_interactive.pm_.c:220 msgid "More" msgstr "次" #: ../../diskdrake/interactive.pm_.c:278 msgid "Hard drive information" msgstr "ハードドライブの情報" #: ../../diskdrake/interactive.pm_.c:310 msgid "All primary partitions are used" msgstr "全てのプライマリパーティションが使われています" #: ../../diskdrake/interactive.pm_.c:311 msgid "I can't add any more partition" msgstr "これ以上のパーティションは追加できません" #: ../../diskdrake/interactive.pm_.c:312 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "パーティションを増やしたいなら，拡張パーティションが\n" "作れるようにどこかのパーティションを消して下さい。" #: ../../diskdrake/interactive.pm_.c:322 msgid "Save partition table" msgstr "パーティションテーブルを保存" #: ../../diskdrake/interactive.pm_.c:323 msgid "Restore partition table" msgstr "パーティションテーブルを再生" #: ../../diskdrake/interactive.pm_.c:324 msgid "Rescue partition table" msgstr "パーティションテーブルを残す" #: ../../diskdrake/interactive.pm_.c:326 msgid "Reload partition table" msgstr "パーティションテーブルを再読込" #: ../../diskdrake/interactive.pm_.c:331 msgid "Removable media automounting" msgstr "リムーバブルメディア自動再マウント中" #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360 msgid "Select file" msgstr "ファイルを選択" #: ../../diskdrake/interactive.pm_.c:347 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "バックアップするパーティションテーブルのサイズが違います\n" "続けますか？" #: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202 #: ../../network/modem.pm_.c:95 msgid "Warning" msgstr "警告" #: ../../diskdrake/interactive.pm_.c:362 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "フロッピーをドライブに挿入してください\n" "フロッピー上の全てのデータは失われます" #: ../../diskdrake/interactive.pm_.c:373 msgid "Trying to rescue partition table" msgstr "パーティションテーブルを救出してみます" #: ../../diskdrake/interactive.pm_.c:379 msgid "Detailed information" msgstr "詳細な情報" #: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674 msgid "Resize" msgstr "リサイズ" #: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727 msgid "Move" msgstr "移動" #: ../../diskdrake/interactive.pm_.c:396 msgid "Format" msgstr "フォーマット" #: ../../diskdrake/interactive.pm_.c:398 msgid "Add to RAID" msgstr "RAID に加える" #: ../../diskdrake/interactive.pm_.c:399 msgid "Add to LVM" msgstr "LVM に加える" #: ../../diskdrake/interactive.pm_.c:402 msgid "Remove from RAID" msgstr "RAID から除く" #: ../../diskdrake/interactive.pm_.c:403 msgid "Remove from LVM" msgstr "LVM から除く" #: ../../diskdrake/interactive.pm_.c:404 msgid "Modify RAID" msgstr "RAIDの変更" #: ../../diskdrake/interactive.pm_.c:405 msgid "Use for loopback" msgstr "ループバックの使用" #: ../../diskdrake/interactive.pm_.c:445 msgid "Create a new partition" msgstr "新しいパーティションを作成" #: ../../diskdrake/interactive.pm_.c:448 msgid "Start sector: " msgstr "開始セクタ: " #: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827 msgid "Size in MB: " msgstr "MB でのサイズ: " #: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828 msgid "Filesystem type: " msgstr "ファイルシステムタイプ: " #: ../../diskdrake/interactive.pm_.c:456 msgid "Preference: " msgstr "プリファレンス: " #: ../../diskdrake/interactive.pm_.c:481 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "新しいパーティションが作れません\n" "(基本パーティションの数が上限に達しているため)。\n" "どれか基本パーティションを削除し、拡張パーティションを作りましょう。" #: ../../diskdrake/interactive.pm_.c:511 msgid "Remove the loopback file?" msgstr "ループバックファイルを削除しますか？" #: ../../diskdrake/interactive.pm_.c:541 msgid "Change partition type" msgstr "パーティションタイプの変更" #: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "どのファイルシステムにしますか？" #: ../../diskdrake/interactive.pm_.c:548 msgid "Switching from ext2 to ext3" msgstr "ext2 から ext3 に変更しています" #: ../../diskdrake/interactive.pm_.c:578 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "ループバックファイル %s をどこにマウントしますか？" #: ../../diskdrake/interactive.pm_.c:579 #, c-format msgid "Where do you want to mount device %s?" msgstr "デバイス %s をどこにマウントしますか？" #: ../../diskdrake/interactive.pm_.c:585 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "このパーティションはループバックで使われているので、\n" "マウントポイントから取り就くことが出来ません。\n" "まずループバックを解除してください。" #: ../../diskdrake/interactive.pm_.c:606 #, c-format msgid "Where do you want to mount %s?" msgstr "%s をどこにマウントしますか？" #: ../../diskdrake/interactive.pm_.c:630 msgid "Computing FAT filesystem bounds" msgstr "fat ファイルシステムの境界を計算" #: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "リサイズ中" #: ../../diskdrake/interactive.pm_.c:662 msgid "This partition is not resizeable" msgstr "このパーティションはリサイズできません" #: ../../diskdrake/interactive.pm_.c:667 msgid "All data on this partition should be backed-up" msgstr "このパーティション上のデータはバックアップするべきです" #: ../../diskdrake/interactive.pm_.c:669 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "リサイズ後には、パーティション %s 上のデータは失われます" #: ../../diskdrake/interactive.pm_.c:674 msgid "Choose the new size" msgstr "新しいサイズを選択" #: ../../diskdrake/interactive.pm_.c:675 msgid "New size in MB: " msgstr "MB でのサイズ: " #: ../../diskdrake/interactive.pm_.c:728 msgid "Which disk do you want to move it to?" msgstr "どのディスクに移動しますか?" #: ../../diskdrake/interactive.pm_.c:729 msgid "Sector" msgstr "セクタ" #: ../../diskdrake/interactive.pm_.c:730 msgid "Which sector do you want to move it to?" msgstr "どのセクタを移動しますか？" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving" msgstr "移動中" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving partition..." msgstr "パーティションを移動中..." #: ../../diskdrake/interactive.pm_.c:750 msgid "Choose an existing RAID to add to" msgstr "追加する既存の RAID を選んで下さい" #: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768 msgid "new" msgstr "新規" #: ../../diskdrake/interactive.pm_.c:766 msgid "Choose an existing LVM to add to" msgstr "追加する既存の LVM を選んで下さい" #: ../../diskdrake/interactive.pm_.c:771 msgid "LVM name?" msgstr "LVM 名は？" #: ../../diskdrake/interactive.pm_.c:812 msgid "This partition can't be used for loopback" msgstr "このパーティションはループバックには使えません" #: ../../diskdrake/interactive.pm_.c:825 msgid "Loopback" msgstr "ループバック" #: ../../diskdrake/interactive.pm_.c:826 msgid "Loopback file name: " msgstr "ループバックファイル名: " #: ../../diskdrake/interactive.pm_.c:831 msgid "Give a file name" msgstr "ファイル名を入力" #: ../../diskdrake/interactive.pm_.c:834 msgid "File already used by another loopback, choose another one" msgstr "ファイルはすでに別のループバックで使用中。他のを選びましょう" #: ../../diskdrake/interactive.pm_.c:835 msgid "File already exists. Use it?" msgstr "ファイルはすでに存在します。いまあるのを使いますか？" #: ../../diskdrake/interactive.pm_.c:858 msgid "Mount options" msgstr "マウントオプション" #: ../../diskdrake/interactive.pm_.c:865 msgid "Various" msgstr "その他" #: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76 msgid "device" msgstr "デバイス" #: ../../diskdrake/interactive.pm_.c:930 msgid "level" msgstr "レベル" #: ../../diskdrake/interactive.pm_.c:931 msgid "chunk size" msgstr "チャンクサイズ" #: ../../diskdrake/interactive.pm_.c:947 msgid "Be careful: this operation is dangerous." msgstr "注意: この操作は危険です。" #: ../../diskdrake/interactive.pm_.c:962 msgid "What type of partitioning?" msgstr "どんなパーティションですか？" #: ../../diskdrake/interactive.pm_.c:978 #, c-format msgid "The package %s is needed. Install it?" msgstr "パッケージ %s が必要です。インストールしますか？" #: ../../diskdrake/interactive.pm_.c:992 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "ごめんなさい，そこはドライブのかなり奥のほう(シリンダ>1024)なので\n" "そこに /boot は作れません。/bootがそこだと、LILO がうまく働かないし，\n" "LILO を使わないなら /boot は要りませんから" #: ../../diskdrake/interactive.pm_.c:996 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "いまルート(/)用に選んだパーティションは，物理的にドライブの先頭から\n" "1024 シリンダより遠くにあって，さらにあなたは/boot パーティションを\n" "持っていませんね。LILO をブートマネージャに使うなら，/boot パーティ\n" "ションの追加をお忘れなく。" #: ../../diskdrake/interactive.pm_.c:1002 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "あなたはルート(/)ととしてソフトウェアRAIDパーティションを選びましたね。\n" "/boot パーティション無しでこれを操作出来るブートローダはありません。\n" "ですから /boot パーティションの追加をお忘れなく。" #: ../../diskdrake/interactive.pm_.c:1022 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "ドライブ %s のパーティションテーブルをディスクに書き込みます！" #: ../../diskdrake/interactive.pm_.c:1026 msgid "You'll need to reboot before the modification can take place" msgstr "リブートしてパーティションテーブルの変更を反映させる必要があります" #: ../../diskdrake/interactive.pm_.c:1037 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "フォーマットしたら、パーティション %s 上のデータは失われます。" #: ../../diskdrake/interactive.pm_.c:1039 msgid "Formatting" msgstr "フォーマット中" #: ../../diskdrake/interactive.pm_.c:1040 #, c-format msgid "Formatting loopback file %s" msgstr "ループバックファイル %s をフォーマット中" #: ../../diskdrake/interactive.pm_.c:1041 #: ../../install_steps_interactive.pm_.c:466 #, c-format msgid "Formatting partition %s" msgstr "パーティション %s をフォーマット中" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Hide files" msgstr "ファイルを隠す" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Move files to the new partition" msgstr "新しいパーティションにファイルを移動" #: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "ディレクトリ %s にはすでにデータがあります\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1064 msgid "Moving files to the new partition" msgstr "新しいパーティションにファイルを移動中" #: ../../diskdrake/interactive.pm_.c:1068 #, c-format msgid "Copying %s" msgstr "%s コピー中" #: ../../diskdrake/interactive.pm_.c:1072 #, c-format msgid "Removing %s" msgstr "%s 削除中" #: ../../diskdrake/interactive.pm_.c:1082 #, c-format msgid "partition %s is now known as %s" msgstr "パーティション %s はこれで %sになりました。" #: ../../diskdrake/interactive.pm_.c:1103 #: ../../diskdrake/interactive.pm_.c:1162 msgid "Device: " msgstr "デバイス: " #: ../../diskdrake/interactive.pm_.c:1104 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS デバイスレター: %s (推定)\n" #: ../../diskdrake/interactive.pm_.c:1108 #: ../../diskdrake/interactive.pm_.c:1116 #: ../../diskdrake/interactive.pm_.c:1181 msgid "Type: " msgstr "タイプ: " #: ../../diskdrake/interactive.pm_.c:1112 msgid "Name: " msgstr "名前: " #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "Start: sector %s\n" msgstr "開始: セクタ %s\n" #: ../../diskdrake/interactive.pm_.c:1121 #, c-format msgid "Size: %s" msgstr "サイズ: %s" #: ../../diskdrake/interactive.pm_.c:1123 #, c-format msgid ", %s sectors" msgstr ", %s セクタ" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Cylinder %d to %d\n" msgstr "シリンダ %d からシリンダ %d\n" #: ../../diskdrake/interactive.pm_.c:1126 msgid "Formatted\n" msgstr "フォーマット済み\n" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Not formatted\n" msgstr "未フォーマット\n" #: ../../diskdrake/interactive.pm_.c:1128 msgid "Mounted\n" msgstr "マウント済み\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "ループバックファイル:\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "デフォルトでパーティションブート\n" " (MS-DOS のブート, lilo ではない)\n" #: ../../diskdrake/interactive.pm_.c:1134 #, c-format msgid "Level %s\n" msgstr "レベル %s\n" #: ../../diskdrake/interactive.pm_.c:1135 #, c-format msgid "Chunk size %s\n" msgstr "チャンクサイズ %s\n" #: ../../diskdrake/interactive.pm_.c:1136 #, c-format msgid "RAID-disks %s\n" msgstr "RAIDディスク %s\n" #: ../../diskdrake/interactive.pm_.c:1138 #, c-format msgid "Loopback file name: %s" msgstr "ループバックファイル名: %s" #: ../../diskdrake/interactive.pm_.c:1141 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "このパーティションはどうも\n" "ドライバ・パーティションらしいですよ。\n" "いじらないほうがいいでしょう。\n" #: ../../diskdrake/interactive.pm_.c:1144 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "この特別な Bootstrap\n" "パーティションは、\n" "デュアルブートシステム用です。\n" #: ../../diskdrake/interactive.pm_.c:1163 msgid "Read-only" msgstr "読みとり専用" #: ../../diskdrake/interactive.pm_.c:1164 #, c-format msgid "Size: %s\n" msgstr "サイズ: %s\n" #: ../../diskdrake/interactive.pm_.c:1165 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "ジオメトリ: %s シリンダ, %s ヘッド, %s セクタ\n" #: ../../diskdrake/interactive.pm_.c:1166 msgid "Info: " msgstr "情報: " #: ../../diskdrake/interactive.pm_.c:1167 #, c-format msgid "LVM-disks %s\n" msgstr "LVMディスク %s\n" #: ../../diskdrake/interactive.pm_.c:1168 #, c-format msgid "Partition table type: %s\n" msgstr "パーティションテーブルタイプ: %s\n" #: ../../diskdrake/interactive.pm_.c:1169 #, c-format msgid "on channel %d id %d\n" msgstr "チャンネル %d id %d上\n" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Filesystem encryption key" msgstr "ファイル暗号化の鍵" #: ../../diskdrake/interactive.pm_.c:1200 msgid "Choose your filesystem encryption key" msgstr "ファイルシステム暗号化用の鍵を選んでください" #: ../../diskdrake/interactive.pm_.c:1203 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "この暗号鍵は簡単すぎます（最低でも %d 文字使ってください）" #: ../../diskdrake/interactive.pm_.c:1204 msgid "The encryption keys do not match" msgstr "暗号鍵が一致しません" #: ../../diskdrake/interactive.pm_.c:1207 msgid "Encryption key" msgstr "暗号鍵" #: ../../diskdrake/interactive.pm_.c:1208 msgid "Encryption key (again)" msgstr "暗号鍵（もう一度入力してください）" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "タイプの変更" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "ユーザ名 %s でログインできません（パスワードのまちがい？" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "ドメイン認証が必要です" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "もう一つ" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "どのユーザ名" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "このホストのアクセスにはユーザ名、パスワード、ドメイン名を入力してください" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477 msgid "Username" msgstr "ユーザ名" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "ドメイン" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "サーバを検索" #: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565 #: ../../fs.pm_.c:569 ../../fs.pm_.c:573 #, c-format msgid "%s formatting of %s failed" msgstr "%s フォーマット, %s 失敗" #: ../../fs.pm_.c:610 #, c-format msgid "I don't know how to format %s in type %s" msgstr "%s を タイプ %s でフォーマットする方法を知りません" #: ../../fs.pm_.c:684 ../../fs.pm_.c:727 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "パーティション %s をディレクトリ %s にマウントできませんでした" #: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599 #, c-format msgid "error unmounting %s: %s" msgstr "%s をアンマウント中にエラー: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "簡単に" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "/usr で" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "サーバ" #: ../../fsedit.pm_.c:240 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "パーティションテーブルが読めません，壊れているようです:(\n" "不正なパーティションを消してみましょうか？（これだとデータが全部消えま" "す！）\n" "あるいは、DrakXにパーティションテーブルを変更させない手があります。\n" "(エラーは%sです)\n" "\n" "全パーティションを消去してよろしいですね？\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "16MB以下のパーティションに JFS は使えません" #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "32MB以下のパーティションに ReiserFS は使えません" #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "マウントポイントは / で始まる必要があります" #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "パーティションはマウントポイント %s にマウント済み\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "LVM 論理ボリュームはマウントポイント %s には使えません" #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "このディレクトリは root ファイルシステム内に残してください" #: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "このマウントポイントには、実在するファイルシステム (ext2, reiserfs, xfs, jfs)" "が必要です。\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "マウントポイント %s には暗号化ファイルシステムは使えません" #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "自動割り当てができるほど空き容量がありません" #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "することがありません" #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "書き込みのため %s を開くときエラーが発生: %s" #: ../../harddrake/data.pm_.c:71 msgid "cpu /* " msgstr "" #: ../../harddrake/sound.pm_.c:170 msgid "No alternative driver" msgstr "かわりのドライバがありません" #: ../../harddrake/sound.pm_.c:171 #, fuzzy, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "このサウンドカード (%s) 用の既知のOSS/ALSA代替ドライバがありません" #: ../../harddrake/sound.pm_.c:173 msgid "Sound configuration" msgstr "サウンド設定" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "ここではサウンドカード (%s) 用に代替ドライバ（OSSかALSA) を選択できます" #: ../../harddrake/sound.pm_.c:176 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../harddrake/sound.pm_.c:178 msgid "Driver:" msgstr "ドライバ：" #: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303 #: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911 #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030 #: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078 #: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134 #: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690 msgid "Help" msgstr "ヘルプ" #: ../../harddrake/sound.pm_.c:185 msgid "Switching between ALSA and OSS help" msgstr "" #: ../../harddrake/sound.pm_.c:186 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../harddrake/sound.pm_.c:202 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298 msgid "Please Wait... Applying the configuration" msgstr "少々お待ちを……設定を適用しています" #: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382 #: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113 #: ../../standalone/service_harddrake_.c:64 msgid "Please wait" msgstr "お待ち下さい" #: ../../harddrake/sound.pm_.c:210 msgid "No known driver" msgstr "既知のドライバなし" #: ../../harddrake/sound.pm_.c:211 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "このサウンドカード (%s) 用の既知のドライバはありません" #: ../../harddrake/sound.pm_.c:214 msgid "Unkown driver" msgstr "未知のドライバ" #: ../../harddrake/sound.pm_.c:215 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "\n" "with subject: unlisted sound driver \"%s\"" msgstr "" "このサウンドカード用の「%s」ドライバは一覧にありません。\n" "\n" "\"lspcidrake -v\" コマンドの出力を\n" "\n" "に、subject: unlisted sound driver \"%s\"でメールしてください" #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 msgid "Auto-detect" msgstr "自動検出" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198 msgid "Unknown|Generic" msgstr "未知|汎用" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "未知|CPH05X (bt878) [各種ベンダー]" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "未知|CPH06X (bt878) [各種ベンダー]" #: ../../harddrake/v4l.pm_.c:224 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" "最近のテレビカードのほとんどではGNU/Linux カーネルのbttvモジュールが正しいパ" "ラメータを自動検出します。\n" "カードが正しく検出されなければ、手動で指定できます。必要に応じてテレビカード" "のパラメータを選んでください。" #: ../../harddrake/v4l.pm_.c:227 msgid "Card model:" msgstr "カードモデル: " #: ../../harddrake/v4l.pm_.c:228 msgid "Tuner type:" msgstr "チューナの種類: " #: ../../harddrake/v4l.pm_.c:229 msgid "Number of capture buffers:" msgstr "キャプチャバッファの数: " #: ../../harddrake/v4l.pm_.c:229 msgid "number of capture buffers for mmap'ed capture" msgstr "mmapキャプチャ用のキャプチャバッファ数" #: ../../harddrake/v4l.pm_.c:231 msgid "PLL setting:" msgstr "PLL 設定:" #: ../../harddrake/v4l.pm_.c:232 msgid "Radio support:" msgstr "ラジオサポート: " #: ../../harddrake/v4l.pm_.c:232 msgid "enable radio support" msgstr "ラジオサポートを有効にする" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" "GNU/Linux はマルチユーザシステムです。つまり各ユーザは自分の好きな設定や\n" "ファイルをもてます。詳しくは、ユーザーガイドを読んでください。\n" "でも管理者である root とはちがって、あなたがここで追加するユーザは、自分\n" "のファイルと自分の設定以外のものは変える権限がありません。自分用に少なく\n" "とも一つ一般ユーザを作ってください。ふつう使うときには、そのアカウントを\n" "使います。毎日 root でログインすると手間は省けますが、とっても危険です!\n" "ちょっとしたまちがいでシステムが動かなくなりかねません。もし一般ユーザで\n" "派手なミスをしても、一部情報を失うかもしれませんが、システム全体には影響\n" "しません。\n" "\n" "まず、本名を入れます。これは必ずしも必要ありません。実際には好きなものを\n" "入れられます。すると drakX はあなたの入力した最初の単語をとって、それを\n" "ユーザ名で使います。これは、そのユーザがシステムにログオンするときの名前\n" "になります。これは変えることもできます。それからパスワードを入力します。\n" "特権なしの（一般）ユーザのパスワードは、セキュリティの観点からは root の\n" "パスワードほど重要ではありませんが、だからといって安易なことはしないでく\n" "ださい。あなたのファイルが危険にさらされます。\n" "\n" "「ユーザを追加」をクリックしたら、好きなだけユーザを追加できます。仲間の\n" "それぞれにアカウントをつくりましょう。お父さんや妹の分でも。好きなだけの\n" "ユーザを追加し終えたら、「完了」を押しましょう。\n" "\n" "「高度な選択」ボタンを押すと、そのユーザのデフォルトのシェルを変えられま\n" "す（デフォルトは bash）" #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "ハードディスク上に検出された、既存の Linux パーティションを上に\n" "示します。ウィザードの選択をそのままにしておいてもいいでしょう。\n" "通常の利用には問題ありません。選択を変えたら、最低でも root\n" "パーティション（「/」）を指定してください。あまり小さいパーティション\n" "をここで選ぶと、ソフトが入り切らなくなりますよ。また、データを別の\n" "パーティションに起きたければ、「/home」も指定しましょう（これは、\n" "Linux パーティションが複数ないと不可能ですが）。\n" "\n" "\n" "ちなみに各パーティションは以下の書式で挙がっています: 「名前」「容量」\n" "\n" "\n" "「名前」は次の書式です: 「ハードディスク種類」「ドライブ番号」\n" "「パーティション番号」（たとえば「hda1」)\n" "\n" "\n" "「ハードディスク種類」は、IDE ディスクなら「hd」で、SCSI なら「sd」\n" "です。\n" "\n" "\n" "「ドライブ番号」は、「hd」や「sd」の後につく文字です。IDEなら:\n" "\n" " * 「a」はプライマリコントローラ上のマスタディスク\n" "\n" " * 「b」はプライマリコントローラ上のスレーブディスク\n" "\n" " * 「c」はセカンダリIDEコントローラ上のマスタディスク\n" "\n" " * 「d」はセカンダリIDEコントローラ上のスレーブディスク\n" "\n" "\n" "SCSI ハードディスクの場合、「a」がSCSI ID番号最小のディスク、\n" "「b」はその次のID番号、という具合です" #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "Mandrake Linux インストールはCD-ROM数枚にまたがります。DrakX\n" "は、選んだパッケージが別のCD-ROM上にあるときは、いまのCDを\n" "吐き出して、必要な別の CD を入れるよう要求します。" #: ../../help.pm_.c:84 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "では、システムにどんなソフトをインストールするか指定しましょう。\n" "Mandrake Linux で使えるソフトは何千とありますし、全部を覚えられる人は\n" "いません。\n" "\n" "CD-ROM からの標準インストールをしているなら、まず手持ちのCDを教えるよう\n" "言われます（エキスパートモードでのみ）。手持ちCDのラベルを調べて、イン\n" "ストール用に使えるCDのチェックボックスをハイライトしましょう。全部すん\n" "だらOKをクリックします。\n" "\n" "パッケージは、マシンの使い方に応じてグループごとにまとめられています。\n" "グループ自体も４つの部分で整理されています:\n" "\n" " * 「ワークステーション」: ワークステーションとしてマシンを使うなら、以下の\n" "グループで使うものを全部選びましょう。\n" "\n" " * 「開発」: マシンをプログラミングに使うなら、以下からほしいグループを\n" "いくつでも選びましょう。\n" "\n" " * 「サーバ」: これがサーバ用マシンになるなら、マシンにインス\n" "トールしたい一般的なサービスをここで選べます。\n" "\n" " * 「グラフィック環境」: 最後に、ここでは好みのグラフィック環境を選びます。\n" "グラフィックワークステーションがほしければ、最低一つは選びましょう!\n" "\n" "マウスのカーソルをグループ名上に動かすと、そのグループについての短い\n" "説明がでます。通常インストール時（アップグレードではなく）に何も\n" "グループを選ばないと、ダイアログがポップアップして、各種の最低限\n" "インストールを提案してくれます：\n" "\n" " * 「X を使う」インストールは、グラフィックデスクトップを実現する\n" "必要最低限のパッケージだけをインストールします;\n" "\n" " * 「基本的な文書も入れる」基本システムと、基本ユーティリティや\n" "そのドキュメンテーションも導入、このインストールはサーバ設置用に\n" "向いています。\n" "\n" " * 「本当に最低限のインストール」とにかくLInuxシステムを稼働させる\n" "必要最低限のものだけをインストール。コマンドラインのみ。このインストール\n" "は全部で 65Mb 程度です。\n" "\n" "「個別パッケージの選択」オプションをチェックすることもできます。\n" "提供されているパッケージを熟知しているか、インストールされるものを\n" "完全に把握したければこれを使います。\n" "\n" "インストールを「更新」モードで開始したら、全グループを非選択にする\n" "と新しいパッケージは入れずに、既存システムの修復更新をするだけにな\n" "ります。" #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" "最後に、「個別パッケージの選択」を選んだかどうかによっては\n" "すべてのパッケージがグループごとに分類されてツリー表示されます。\n" "このツリーを見ながら、グループやサブグループ単位、または個別\n" "パッケージを選んだり除外したりできます。\n" "\n" "ツリーのパッケージを選ぶと、右にその説明が出ます。選び終わったら\n" "「インストール」ボタンを押しましょう。インストールが始まります。\n" "ハードウェアの速度と選んだパッケージの数によっては、インストール\n" "完了までにかなり時間がかかります。完了までの推定時刻が表示される\n" "ので、それを見てなんでしたらお茶でもどうぞ。\n" "\n" "!! サーバパッケージを選んだり、あるいはそれがどこかのグループに\n" "含まれていた場合には、そのサーバを本当にインストールしたいか、\n" "確認を求められます。Mandrake Linuxでは、インストールされたサーバ\n" "はデフォルトで起動時にたちあがります。このディストリビューション\n" "出荷時には安全で問題が知られていなくても、このバージョン完成後に\n" "セキュリティホールが見つかるかもしれません。もしそのサービスが何の\n" "ためのものか、なぜインストールされるのかがわからなければ「いいえ」\n" "をクリックしましょう。「はい」をクリックすると、一覧のサービスは\n" "インストールされて、デフォルトで起動時にたちあがります。 !!\n" "\n" "「依存関係の自動解決」オプションを選ぶと、インストーラが自動的に\n" "パッケージを選んだときにも警告ダイアログが出ません。なぜ勝手にパ\n" "ッケージを選ぶかと言うと、ほかのパッケージをインストールするとき\n" "に必要となるパッケージがあって、それがないとインストールが完了し\n" "ないからです。\n" "\n" "一覧の下にある小さなフロッピーディスクのアイコンは、以前のインス\n" "トール時に選んだパッケージ一覧を読み込むためのものです。このアイ\n" "コンを選ぶと、以前のインストールの最後に作ったフロッピーを入れる\n" "ように支持が出ます。こういうフロッピーの作り方は、さいごのステップ\n" "の二番目のヒントを読んでください。" #: ../../help.pm_.c:171 msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "ここでは、インターネット/ネットワーク接続の設定ができます。マシンを\n" "インターネットやLANにつなぎたいなら「OK」をクリックしてください。\n" "ネットワークデバイスやモデムの自動検出が開始されます。もしこの検出\n" "がうまくいかなければ、次回は「自動検出を使う」のチェックをはずして\n" "おきましょう。またネットワーク設定をしない、あるいは後回しにもでき\n" "ます。その場合には「キャンセル」をクリックするだけです。\n" "\n" "可能な接続は、普通のモデム、ISDNモデム、ADSL接続、ケーブルモデム、そして\n" "通常のLAN接続（イーサネット）です。\n" "\n" "ここでは設定の細かい話はしません。ただ、インターネットサービスプロバイダ\n" "やシステム管理者にもらったパラメータは全部用意しておいてください。\n" "\n" "設定の詳細は、マニュアルのインターネット接続の章を見るか、あるいは単に\n" "システム設定がすんでから、そこで説明するプログラムを使って接続を設定し\n" "ましょう。\n" "\n" "ネットワークの設定はインストール後にやりたい、あるいはネットワーク設定が\n" "すんでいるなら「キャンセル」を押します。" #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "ではマシンの起動時に自動的に開始したいサービスを選びましょう。\n" "\n" "ここには現在のインストールで使えるサービスが全部挙がっています。\n" "よく見て、起動時に必ずしも必要ないもののチェックをはずしましょう。\n" "\n" "各サービスを選ぶと、説明が出ます。でも、そのサービスが役に立つか\n" "わからなければ、デフォルトのままにしておくほうが無難です。\n" "\n" "このマシンをサーバにするつもりなら、ここでは特に気をつけましょう。\n" "使わないサービスをむやみに開始させてはいけません。一部のサービスは、\n" "サーバ上で使うと危険だというのをお忘れなく。\n" "一般に、本当に必要なサービスだけ選んでください。" #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" "GNU/Linux は時間を GMT (グリニッジ標準時) で管理して、選ばれた時間帯を\n" "もとに現地時間に変換します。でも、「ハードウェアクロックをGMTにあわせる」\n" "を非選択にすれば、この方式をやめて、ハードウェアクロックとシステムクロック\n" "が同じ時間になるようにできます。もしこのマシンでウィンドウズのような別の\n" "OS を動かしているなら、そのほうがいいでしょう。\n" "\n" "「自動時間あわせ」オプションを選ぶと、インターネット上のリモートタイム\n" "サーバに接続して、自動的に時間あわせを行います。出てきた一覧から、最寄り\n" "のサーバを選んでください。もちろんこの機能を使うには、インターネット接続\n" "が必要になります。あなたのマシン上にタイムサーバをインストールして、\n" "オプションによってはローカルネットワーク上の他のマシンが、それに接続して\n" "時間あわせをすることもできます。" #: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" "X (X ウィンドウシステム) は、GNU/Linux グラフィックインターフェースの\n" "キモで、Mandrake Linux についているグラフィック環境 (KDE, Gnome, \n" "AfterStep, WindowMaker...)はすべてこれに依存します。ここでは、DrakX\n" "は自動的に X を設定しようとします。\n" "\n" "これが失敗することはまずありません。失敗する可能性として考えられるの\n" "は、ハードウェアがとても古い（か新しすぎ）ということです。成功すれば\n" "モニタに可能な最大の解像度で自動的にXが起動します。そしてウィンドウ\n" "が出てきて、この画面が見えるかと確認します。\n" "\n" "「エキスパート」インストールの場合には、X 設定ウィザードに入ります。\n" "このウィザードについて詳しくは、マニュアルを見てください。\n" "\n" "メッセージが見えて、それに「はい」と答えたら、DrakX は次に進みます。\n" "メッセージが見えなければ、設定がまちがっているということなので、その\n" "テストは10秒で終了して、もとの画面に戻ります。" #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "最後に、起動時にグラフィックユーザインターフェースがほしいか聞かれます。\n" "設定を試していないときでも、この質問は出ます。マシンをサーバとして使うか\n" "ディスプレイの設定がうまくいかなかった時には、ここではもちろん「いいえ」\n" "と答えましょう。" #: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" "Mandrake Linux CDROM にはレスキューモードが組み込んであります。これを\n" "使うには CDROM から起動して、起動時に >>F1<< キーを押し、プロンプトで\n" ">>rescue<< とタイプすることです。でも、CDROMから起動できない場合には、\n" "2種類の場合にここに戻ってくる必要があるでしょう:\n" "\n" " * ブートローダのインストール時には、drakX は主ディスクのブートセクタ\n" " (MBR) を書き換えます（別のブートマネージャを使っていない限り）。こう\n" "することで、ウィンドウズと GNU/Linux のどっちでも起動できるようになり\n" "ます（システムにウィンドウズが入っている場合）。\n" "　ウィンドウズをインストールしなおすと、マイクロソフトのインストール\n" "プロセスがブートセクタを書き換えるので、GNU/Linuxが起動できません!\n" "\n" " * もし何か問題が起きて、ハードディスクから GNU/Linux を起動できない\n" "場合には、GNU/Linux を起動するにはこのフロッピーしか手がありません。\n" "このディスクには、停電とかちょっとしたタイプミス、パスワードの間違い\n" "などによるクラッシュからシステムを回復させるのに使える、各種のツール\n" "が入っています。\n" "\n" "「はい」と応えたら、フロッピーディスクをドライブに入れろと\n" "要求されます。挿入するフロッピーディスクは、空か、不要なデータしか\n" "入っていないものにしましょう。フォーマットする必要はありません。\n" "DrakXが完全にそれを書き換えます。" #: ../../help.pm_.c:277 msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "さてこんどは、ハードディスク上でMandrake Linux OS をどこにインストール\n" "するか選ぶことになります。もしハードディスクが空か、すでに別の OS が\n" "スペースを全部使ってしまっていたら、パーティションを切ってやる必要が\n" "あります。一言で、パーティションを切るというのは、ハードディスクを論理\n" "的に分割してやることです。そうやって、新しく Mandrake Linux システムを\n" "インストールする区切りをこしらえてやるわけです。\n" "\n" "パーティションを切るのは、やりなおしや後戻りがききません。だから\n" "初心者にはおっかないし、気疲れする作業ではあります。\n" "このウィザードはプロセスを簡単にするためのものです。始める前に、\n" "マニュアルをじっくり読んでください。\n" "\n" "エキスパートモードでインストールをしていうなら、Mandrake Linux \n" "のパーティションツール DiskDrake が起動します。これを使うと、パー\n" "ティションの細かい設定ができます。マニュアルの DiskDrake の章を \n" "参照してください。使い方は同じです。インストールインターフェース \n" "からは、ここで説明するウィザードが使えます。これには、インター \n" "フェースで「ウィザード」ボタンをクリックしましょう。\n" "\n" "もしパーティションがすでに切ってあるなら（前にインストールしたこ \n" "とがあるとか、別のパーティションツールを使ったとか）、あとは単に \n" "Linux システムをインストールすればいいだけです。\n" "\n" "パーティションがまだ定義されていなければ、新しく作りましょう。\n" "それには、上で用意したウィザードを使ってください。ハードディスクの設定\n" "に応じて、いくつかやり方があります:\n" "\n" " * 空きスペースを使う：これは空きディスクを自動的にパーティションして \n" "くれます。これ以上何もする必要はありません。\n" "\n" "* 既存パーティションを使う: ウィザードが既存のLinux パーティションを \n" "ディスク上で見つけました。もしこれを使うなら、このオプションを選びます。\n" "\n" " * ウィンドウズの空き部分を使う: ハードディスクにウィンドウズが\n" " インストールされていて、ディスク全体を使っているなら、\n" " Linux のデータ用に空きをつくる必要があります。これには、\n" " ウィンドウズを消してしまってもいいですし（上の「全ディスク消去」\n" " か「エキスパートモード」を見てください）、ウィンドウズの\n" " パーティションをリサイズする方法もあります。リサイズの場合、\n" " データはすべて残ります。 Mandrake Linux とウィンドウズを同じ\n" " マシンで使いたければこれがお奨めです。\n" "\n" " この方法を選ぶ前に、これをやるとウィンドウズのパーティションは\n" " 前より小さくなるのは承知しておいてください。\n" " つまり、ウィンドウズのほうでは、データを保存したり新しいソフトを\n" " インストールするときに、使える空きが少なくなるわけです。\n" "\n" " * ディスク全体を消去: ハードドライブ上の全データやパーティションを\n" " 消去して、新しく Mandrake Linux で上書きしたければ、このオプションを\n" " 選びましょう。この場合、慎重にしてください。いったん確認ボタンを\n" " 押したら、もうやりなおしはききません。\n" "\n" " !! このオプションを選ぶと、ディスク上のデータはすべて消えますよ !!\n" "\n" " * ウィンドウズを削除: ドライブ上のものすべてを消去して、白紙の状態 \n" "からパーティションをやり直します。ディスク上のデータは全部消えます。\n" "\n" " !! このオプションを選ぶと、ディスク上のデータは全部消えますよ !!\n" "\n" " * エキスパートモード: ハードディスクを手動でパーティションしたければ、\n" " このオプションを選びましょう。でも、注意してください。強力なだけに、\n" " 危険な選択でもあります。ディスク上の全データをあっさり消してしまえます。\n" " よくよくわかったうえでなければ、これは選ばないでください。" #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "はーい、できました。インストールが完了して、GNU/Linuxシステムが使える\n" "ようになりましたよ。OK をクリックするとシステムが再起動します。もし\n" "デュアルブートにしていたら、ウィンドウズでもLinuxでも選べます。\n" "\n" "「高度」ボタン（エキスパートモードのみ）を押すと、二つボタンが出てきます:\n" "\n" " * 自動インストールフロッピーを作る: 何も手出ししなくても自動的に、\n" "いまやったのとほとんど同じインストールをしてくれるフロッピーを作成。\n" "\n" " このボタンをクリックすると、二つのオプションが選べます:\n" "\n" " * 再現: これは主に自動インストールです。パーティション切りだけは\n" "対話型で行われます。\n" "\n" " * 自動化: 完全に自動化されたインストールです。ハードディスクは\n" "完全に上書きされてデータは全部消えます。\n" "\n" " 似たようなマシン多数にインストールするときにはとても便利です。\n" "弊社のウェブサイトで、Auto install の項を見てください。\n" "\n" " * パッケージ選択を保存(*): いま選んだパッケージのリストを保存。\n" "こうしておくと、別のインストール時にもドライブにこのフロッピーを\n" "入れて、ヘルプ画面 F1 で 「linux defcfg=\"floppy\"」ですみます。\n" "\n" "(*) FAT 形式のフロッピーが必要（GNU/Linux で作るには「mformat a:」\n" "とタイプします。)" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "新しくつくったパーティションは、すべてフォーマットしないと使えません\n" "（フォーマットとはファイルシステムをつくるということです）。\n" "\n" "ここで、既存のパーティションもフォーマットして、中身のデータを消去\n" "しておくこともできます。この場合には、フォーマットしたいパーティション\n" "も選んでおいてください。\n" "\n" "別に既存のパーティションを無理にフォーマットする必要はありません。\n" "OS の入ったパーティション（たとえば「/」「/usr」「/var」など）は\n" "フォーマットが必要ですが、とっておきたいデータの入った\n" "パーティション（通常は「/home」）はそのままでだいじょうぶです。\n" "\n" "パーティション選びには注意しましょう。フォーマットしたら、データは\n" "全部消去されて、二度と回復できません。\n" "\n" "パーティションのフォーマットを開始するには「OK」をクリックします。\n" "\n" "他のパーティションを選んでそちらにMandrake Linux OS を入れるなら、\n" "「キャンセル」をクリックしてください。\n" "不良ブロックのチェックをしたければ「高度な選択」をクリックします。" #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "新しい Mandrake Linux os をインストール中です。しばらく時間が\n" "かかります（インストールするサイズとコンピュータの速度にもよります）。\n" "\n" "しばらくお待ちを。" #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" "Mandrake Linux をあなたがインストールする頃には、たぶんいくつかのパッケージ\n" "が更新されているはずです。バグフィクスが行われたり、セキュリティ問題が解決\n" "されているかもしれません。こういう更新の恩恵を被るため、それをインターネッ" "ト\n" "からダウンロードするかどうかきかれます。インターネット接続があれば「はい」\n" "を選び、更新パッケージのインストールを後回しにするなら「いいえ」を選びま" "す。\n" "\n" "「はい」を選ぶと、更新パッケージの置かれた場所一覧が表示されます。\n" "最寄りの場所を選んでください。するとパッケージ選択ツリーが表示されます。\n" "何が選ばれたか確認しましょう。「インストール」を押すと、選択パッケージ\n" "が読み込みインストールされます。「キャンセル」で中断です。" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "先に進む前にライセンス条件を慎重に読んでください。これは Mandrake Linux\n" "全体をカバーするものです。一つでも同意できない条項があれば、「拒否」\n" "を押してください。するとインストールがすぐに終わります。インストールを\n" "続けるには、「同意する」ボタンを押してください。" #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "さて、こんどはこのマシンに求めるセキュリティ水準を選ぶ段階です。原則として\n" "マシンが外部にさらされている度合いが高いほど、そしてマシン内のデータの重要\n" "性が高いほど、セキュリティ水準も高くします。\n" "でも、高いセキュリティは、一般にマシンの使いやすさを犠牲にします。\n" "各水準について詳しくは、レファレンスマニュアルの MSEC の章を参照のこと。\n" "\n" "何を選べばいいかわからなければ、デフォルトのままにしておきましょう。" #: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "さてここで、新しい Mandrake Linux システムのインストールにどの\n" "パーティションを使うか指定します。もしパーティションが定義済みなら\n" "（前に GNU/Linux をインストールしたことがあったり別のツールを使った\n" "りした場合）、それをそのまま使うこともできます。それ以外は、\n" "パーティション定義が必要です。\n" "\n" "パーティションをつくるには、まずハードディスクを選びます。もし\n" "最初の IDE ドライブを選ぶなら「hda」、二番目の IDE なら「hdb」、\n" "最初の SCSI ディスクなら「sda」という具合にクリックして選びます。\n" "\n" "ハードディスクのパーティションを切るには、以下のオプションが使えます:\n" "\n" " * 「全消去」: 選んだハードディスク上の全パーティションを消去します。\n" "\n" " * 「自動割り当て」: ハードディスクの空き部分に、自動的に Ext2 と\n" " スワップパーティションをつくります。\n" "\n" " * 「もっと」: さらに追加機能にアクセスできるようになります:\n" "\n" " * 「パーティションテーブルを保存」: パーティションテーブルをフロッピー\n" " に保存します。後日パーティションテーブル修復が必要なときに便利です。\n" " これは是非やっておくようお勧めします。\n" "\n" " * 「パーティションテーブルを復元」: 前にフロッピーに保存したパーティショ" "ン\n" " テーブルを復元します。\n" "\n" " * 「パーティションテーブル修復」: パーティションテーブルが破壊され\n" " たら、このオプションでそれを修復してみることができます。\n" " 慎重に使って、これが万能でないことは承知しておいてください。\n" "\n" " * 「パーティションテーブル再読込」: 変更をすべて捨てて、最初の\n" " パーティションテーブルに戻す\n" "\n" " * 「リムーバブルメディアの自動マウント」: このオプションのチェックを\n" " はずすと、ユーザは手動でリムーバブルメディア、たとえばフロッピーや \n" " CD-ROMを手動でマウント/アンマウントする必要があります。\n" "\n" " * 「ウィザード」: ハードディスクのパーティションウィザードを使うときの\n" "オプションです。パーティションについての知識がない人は、これがお奨めです。\n" "\n" " * 「取り消し」: このオプションを使って変更を取り消します。\n" "\n" " * 「通常/エキスパートモードへの切り替え」: パーティションに対して追加の\n" "指定ができるっようになる（種類、オプション、フォーマントなど）。また情報も\n" "詳しく表示される。\n" "\n" " * 「完了」: ハードディスクのパーティション切りが終わったら、このオプション" "を\n" "使って変更を保存します。\n" "\n" "参考までに、キーボードから各オプションが選べます。タブと上下矢印を使って\n" "パーティションを選びましょう。\n" "\n" "パーティションを選んだら、以下が使えます:\n" "\n" " * Ctrl-c：新規パーティションをつくる（空のパーティションを選んだとき)\n" "\n" " * Ctrl-d：パーティション削除\n" "\n" " * Ctrl-m：マウントポイントをセット\n" "\n" "PPC マシンにインストールしている場合には、yaboot ブートローダ用に、\n" "最低 1 MB の小さな HFS「ブートストラップ」パーティションを作りましょう。\n" "このパーティションを、たとえば 50 MB とか大きめにしておくと、そこに予備の\n" "カーネルやramdisk イメージを保存しておけて、緊急起動に使えて便利です。" #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "ウィンドウズのパーティションがいくつかハードディスク上に見つかりました。\n" "Mandrake Linux OS のインストール用にリサイズしたいものを選んで\n" "ください。\n" "\n" "各パーティションは以下の書式です: 「Linux名」「ウィンドウズ名」「容量」\n" "\n" "「Linux 名」は次の書式です: 「ハードディスク種類」「ドライブ番号」\n" "「パーティション番号」（たとえば「hda1」)\n" "\n" "\n" "「ハードディスク種類」は、IDE ディスクなら「hd」で、SCSI なら「sd」\n" "です。\n" "\n" "\n" "「ドライブ番号」は、「hd」や「sd」の後につく文字です。IDEなら:\n" "\n" " * 「a」はプライマリコントローラ上のマスタディスク\n" "\n" " * 「b」はプライマリコントローラ上のスレーブディスク\n" "\n" " * 「c」はセカンダリIDEコントローラ上のマスタディスク\n" "\n" " * 「d」はセカンダリIDEコントローラ上のスレーブディスク\n" "\n" "\n" "SCSI ハードディスクの場合、「a」がSCSI ID番号最小のディスク、\n" "「b」はその次のID番号、という具合です\n" "「ウィンドウズ名」は、ウィンドウズでのドライブ文字です（最初のディスク\n" "やパーティションは「C:」ドライブです)。" #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "しばらくお待ちを。この操作はしばらくかかりますので。" #: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" "DrakXはこんどは、どんな種類のインストールをしたいか尋ねます。デフォルト\n" "（推奨）インストールか、もっとコントロールしたいか（「エキスパート」）\n" "です。また新規インストールか既存のMandrake Linuxを更新するのかも選べます。\n" "\n" " * 「インストール」 古いシステムを完全に消去します。実は、いまのマシンの\n" "種類によっては、古い（Linuxのみならず他の）パーティションを変更しないまま\n" "保存できます。\n" "\n" " * 「更新」 このインストールクラスでは、いまの Mandrake Linux システム\n" "上のパッケージを更新するだけです。ハードドライブのパーティションや各種\n" "ユーザによる設定は残ります。それ以外は通常インストールとまったく同じ\n" "選択肢が得られます。\n" "\n" " * 「パッケージのみ更新」 この新しいクラスは、既存 Mandrake Linux を更新\n" "しつつ、いままでのシステム設定は変えません。カレントのインストールに対して\n" "新しいパッケージを追加するときもここです。\n" "\n" "Mandrake Linux8.1以降を更新したいのなら「更新」でだいじょうぶでしょう。\n" "\n" "GNU/Linux への習熟度に応じて、以下のインストール・更新レベルが\n" "選べます:\n" "\n" "* 推奨: GNU/Linux のインストールが初めてならこれを選んでください。\n" "うるさい質問もあまりなく、とても簡単にインストールできます。\n" "\n" "* エキスパート: GNU/Linux に詳しい人は、このインストールクラスを\n" "選べます。きわめてカスタム化したインストールができます。\n" "GNU/Linuxについてよほど詳しくないと、なかなか答えられない質問が\n" "あります。わかった人以外は、このクラスは選ばないこと。" #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" "ふつう、drakXはあなた用の正しいキーボードを自動的に選びます（言語の選択\n" "をもとに判断します）。だからこのステップはふつうは出てきません。が、自分\n" "の言語にきっちり対応したキーボードを使っていないかもしれません。たとえば\n" "英語を話すスイス人なら、キーボードはスイス式のほうがいいと思うかもしれま\n" "せん。あるいは英語つかいでもケベック在住なら、似た状況になるでしょう。\n" "いずれの場合でも、このインストール段階に戻って、一覧から適切なキーボード\n" "を選んでください。\n" "\n" "「もっと」ボタンを押すと、サポートされるキーボードがすべて表示されます。" #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" "インストールとシステム利用で使う言語を選んでください。\n" "\n" "「高度な選択」ボタンで、ほかの言語も選べます。これはマシンに入って、後で\n" "必要に応じて使えます。たとえばこのマシンをスペインの人にも使ってもらうな\n" "ら、ツリー表示の主要言語には英語を選んで、「高度な選択」でスペイン語/ス\n" "ペインに対応するボックスにチェックを入れます。\n" "\n" "言語は複数選べます。追加の言語（ロケール）を選んで、OKを押して確認したら、\n" "自動的に次のステップに進みます。" #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" "デフォルトだと、DrakX は２ボタンマウスを想定して、中央ボタンをエミュレート\n" "する設定になっています。DrakX は、それがPS/2マウスかUSBマウスかを自動判定\n" "します。\n" "\n" "別種のマウスを指定するには、一覧から別のマウスを選んでください。\n" "\n" "デフォルト以外のマウスを選んだら、マウスのテスト画面が出てきます。\n" "ボタンやホイールを使ってみて、この設定でいいかを確認しましょう。うまく\n" "動かなければ、スペースか「リターン」を押してキャンセルして、選びなおし\n" "ます。" #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "正しいポートを選んでください。たとえば、MS ウィンドウズでの\n" "COM1ポートは、GNU/Linuxでは ttyS0 という名前になります。" #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "さあ、GNU/Linuxシステムのセキュリティ上で一番のキモにやってきました。\n" "root パスワードの選択です。root はシステム管理者で、システムを更新し\n" "たり、ユーザを追加したり、システム全体の設定を変えたりできる唯一の存在\n" "です。root はこのシステムでは万能なのです！\n" "だからこそ、他人に推測されないパスワード選びが必要です。簡単すぎたら\n" "drakX が警告します。ここで示すように、パスワードを入力しないことは可能\n" "ですが、でも設定することを強くお勧めします。そうすべき理由が一つ：\n" "GNU/Linux を起動したからといって、ほかのオペレーティングシステムが\n" "何をやっても無事と思っちゃいけない、ということです。rootならあらゆる\n" "制限を突破して、パーティションそのものをアクセスして、全ディスクの\n" "データをうっかり削除してしまえます！ だから、rootになるのはむずかしく\n" "しておくのが大事です。\n" "\n" "パスワードは、アルファベットと数字を混ぜたもので、最低でも8文字が\n" "必要です。決して書き留めたりしないでください。\n" "\n" "パスワードは、長すぎたりややこしすぎたりしてもいけません。楽に覚え\n" "ておけるものにしましょう。\n" "\n" "パスワードは二回入力します。このときにまちがいをすると、まちがった\n" "ものが登録されてしまうので、困ったことになります。\n" "\n" "ローカルネットワークの設定によっては、NIS を使うかもしれません。\n" "わからなければシステム管理者にきいてください。NISを使う場合には\n" "「NISを使う」オプションを選びます。「OK」を押したら、必要な情報\n" "を入力します。" #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" "LILO と GRUB は GNU/Linux の起動に使われるブートローダです。この段階は\n" "ふつう、完全に自動化されています。DrakXはディスクのブートセクタを分析して\n" "その結果に応じて対応するようにします:\n" "\n" " * もしウィンドウズのブートセクタがあれば、それは GRUB/LILO ブート\n" "セクタに書き換えられ、GNU/Linux と Windowsの両方が起動可能になる;\n" "\n" " * もし GRUB か LILO ブートセクタが見つかれば、最新版に更新;\n" "\n" "わからなければ、drakX は各種オプションを挙げたダイアログを表示します。\n" "\n" " * 「使うブートローダ」: 選択肢は3つあります:\n" "\n" " * 「LILO、グラフィックメニューつき」: グラフィックメニューつきの LILO が" "よければこれを。\n" "\n" " * 「Grub」: GRUB (テキストメニュー)の場合。\n" "\n" " * 「LILO テキストメニュー」: テキストメニューつき LILO の場合。\n" "\n" " * 「ブートデバイス」: ほとんどは、デフォルト (/dev/hda) のままですが\n" "場合によってはブートローダを二番目のハードディスク (/dev/hdb)や、\n" "フロッピーディスクに置けます (/dev/fd0)。\n" "\n" " * 「デフォルトイメージ起動の待ち時間」: コンピュータを再起動したとき、\n" "ブートローダのデフォルト以外のメニューを選ぶための時間を指定します。\n" "\n" "!! ブートローダをインストールしないと（ここで「キャンセル」を選んだ\n" "場合）、ほかにMandrake Linuxを起動する方法を確保するのを忘れないで\n" "ください！\n" "また、ここでのオプションを変えるのは、その意味が分かっている人だけに\n" "してください !!\n" "\n" "このダイアログで「高度な選択」ボタンを押すと、高度なユーザ専用の\n" "各種詳細オプションが出てきます。\n" "\n" "汎用ブートローダのパラメータを設定したら、こんどは起動時に選べる\n" "ブートオプションの一覧が示されます。\n" "\n" "別のオペレーティングシステムがシステム上にあれば、自動的に起動\n" "メニューに追加されます。既存のオプションの細かい設定もできます。\n" "既存エントリをダブルクリックすると、パラメータを変えたり削除し\n" "たりできます。「完了」を押せば、インストールの次のステップへ進み\n" "ます。" #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "LILO (LInux LOader) と Grub はブートローダです。コンピュータ上のGNU/Linux\n" "など各種OSを起動できます。\n" "普通は、これらのOSは自動的にきちんと検出されてインストールされます。\n" "これがダメなら、ここで手動でエントリを追加しましょう。パラメータを\n" "まちがえないよう注意してください。\n" "\n" "他のOSには他の人がアクセスできないようにしたいこともあります。この\n" "場合にはそのOSのエントリを削除しておきましょう。ただしこの場合は、\n" "そのOSを使うときには起動ディスクが要りますよ！" #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "GNU/Linuxをたちあげるのに必要な情報を、どこに置きたいか指定します。\n" "\n" "よくわからないなら「ドライブの最初のセクタ(MBR)」を選んでください。" #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" "ここではコンピュータ用の印刷システムを選びます。他のOSでは一つしか\n" "提供されない印刷システムが、ここでは3つもあります。\n" "\n" " * \"pdq\" - これは「print, don't queue（印刷してキューはしない）」\n" "です。プリンタがマシンに直結していて、紙詰まりのときにすぐ中断でき\n" "て、ネットワークプリンタがない場合にはこれを選びましょう。ネットワーク\n" "はごく簡単なものしか対応できないし、それにネットワークで使うと遅くなり\n" "ます。GNU/Linuxが初めてなら、\"pdq\" を選びましょう。インストール後で\n" "もPrinterDrakeをMandrake コントロールセンターから選んで「エキスパート」\n" "ボタンを押せば、後から選択は変えられます。\n" "\n" " * \"CUPS\"「Common Unix Printing System（共通Unix印刷システム）」\n" "はローカルプリンタへの印刷も、地球の裏側のプリンタへの印刷も見事に処理\n" "します。サーバ状にも使えるし、昔ながらの \"lpd\" 印刷システムのクライ\n" "アントにもなるので、古いシステムと互換性もあります。いろいろ芸もできま\n" "すが、基本的な設定は \"pdq\" と同じくらい簡単です。これに \"lpd\" サーバ\n" "をエミュレートしてほしければ、\"cups-lpd\" デーモンを有効にしましょう。\n" "印刷やプリンタオプション選択用にグラフィックフロントエンドもあります。\n" "\n" " * \"lprNG\" - 「line printer daemon New Generation（ラインプリンタデーモン\n" "ニュージェネレーション）」。これは他のオプションとほぼ同じことができますが\n" "IPXプロトコルをサポートしているのでNovell Network上のプリンタでも印刷でき\n" "るし、シェルコマンドへ直接印刷もできます。Novell が必要だったり、パイプ\n" "を使わずにコマンドへ印刷したければ lprNGを使いましょう。\n" "さもなければ、CUPS のほうが簡単だしネットワーク上での性能が優れているので\n" "CUPSにしましょう。" #: ../../help.pm_.c:759 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" "DrakXはマシン上のIDEデバイスを全部見つけようとします。またPCI SCSI\n" "アダプタもあれば検出しようとします。SCSIカードみつけたら、適切なドライバ\n" "を自動的にインストールします。\n" "\n" "ハードウェア検出はときどき失敗することもあるので、DrakXはPCI SCSIアダ\n" "プタがシステムにあるかどうか確認するよう聞いてきます。もし存在するなら\n" "「はい」をクリックすると、アダプタのドライバ一覧を表示するので、そ\n" "こから選びましょう。SCSI がなければ「いいえ」をクリックします。\n" "わからなければ、「ハードウェア情報を見る」を選んでOKをクリックし、\n" "ハードウェア一覧を見ることもできます。\n" "\n" "手動でアダプタを指定した場合には、DrakXはオプション指定をしたいかどうか\n" "質問してきます。DrakXにハードウェアをプローブさせて、オプションを決めさせ\n" "ましょう。たいていこれでうまく働きます。\n" "\n" "もし必要オプションをDrakXが自動的に取得できなければダメなら、ドライバに\n" "自分でオプションを与える必要があります。\n" "ユーザガイド（3章、「ハードウェアについての情報収集」）から、これに関わる\n" "情報をハードのマニュアルやメーカー Web サイト（ネットにアクセスできれば）\n" "あるいは（システム上にあれば）MS Windows からどうやって必要情報を得るか\n" "を調べてください。" #: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "yaboot用の追加エントリをここで追加できます。他のOSの場合でも、他の\n" "カーネルでも、緊急用起動イメージでも可能です。\n" "\n" "ほかのOSの場合 - エントリは、ラベルとrootパーティションだけです。\n" "\n" "Linux の場合、可能なオプションがいくつかあります: \n" "\n" " * ラベル: この起動オプションを選ぶときに、yabootプロンプトでタイプ\n" "する名称。\n" "\n" " * イメージ: 起動するカーネルの名称。普通は vmlinux、または\n" "それになにか拡張子がついたものになります。\n" "\n" " * 起動: Linuxインストール用のrootパーティションまたは「/」\n" "\n" " \n" " * 追加: Apple のハードウェアでは、カーネル追加オプションはかなりの場合\n" "ビデオハードウェアの初期化に使ったり、1ボタンマウス用にキーボードによる\n" "マウスボタンのエミュレーションに使ったりします。以下に例を挙げます:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: このオプションは、起動デバイスが有効になる前に初期モジュール\n" "のロードか、あるいは緊急起動時のramdisk イメージのロードに使います。\n" "\n" " * Initrd-size: デフォルトの ramdisk サイズは4096 バイトです。\n" "もっと大きな ramdisk を使うときに、このオプションを使用します。\n" "\n" " * Read-write: 通常、「root」パーティションは読み出し専用で起動し、\n" "システムが「立ち上がる」前にファイルシステムのチェックをします。この\n" "オプションでこれをオーバーライドできます。\n" "\n" " * NoVideo: Apple のビデオ回路が極端に問題を起こすようなら、この\n" "オプションを選んで「ビデオなし」モードで起動できます。この場合には\n" "ネイティブのフレームバッファで起動します。\n" "\n" " * デフォルト: デフォルトの Linux の選択としてこのエントリが使われ\n" "ます。これは単に、yaboot プロンプトで ENTER を押せば選べます。この\n" "エントリはまた、TABを押して起動時の選択肢を表示させたときには、\n" "「*」がついてハイライトされています。" #: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot は、NewWorld MacIntosh ハードウェア用のブートローダです。これが\n" "あると、マシン上のGNU/Linux, MacOS, MacOSX を起動時に選べます。\n" "ふつう、こうした GNU/Linux 以外の OS は自動的にきちんと検出されて\n" "インストールされます。もしダメなら、この画面で、自分でエントリを追加\n" "できます。正しいパラメータを選ぶよう注意してください。\n" "\n" "Yaboot の主オプションは:\n" "\n" " * 起動メッセージ: bootプロンプト前に表示される簡単なメッセージ\n" "\n" " * 起動デバイス: GNU/Linux 起動用の情報をどこに置くか指示。\n" "普通は、この情報用にブートストラップ用のパーティションを\n" "この前の段階で作ってあるはずです。\n" "\n" " * オープンファームウェアの待ち時間: LILO とちがって、yabootには待ち時間\n" "が二種類設定できます。最初の待ち時間は秒単位で、この待ち時間の間に、\n" "CD, OF boot, MacOS, Linuxのどれを起動するか選べます。\n" "\n" " * カーネル起動タイムアウト: このタイムアウトは LILO 起動待ち時間と似ていま" "す。Linux を選んだら、この待ち時間が0.1秒単位で実行されて、そのまま\n" "だとデフォルトのカーネル記述が選ばれます。\n" "\n" " - CD 起動を有効にしますか?: このオプションをチェックすると、最初の起動プロ" "ンプトで「C」を選んでCDから起動できるようになります。\n" "\n" " * OF 起動を有効にしますか?: このオプションをチェックすると、最初の起動プロ" "ンプトで「N」を選んでオープンファームウェアから起動できます。\n" "\n" " * デフォルト OS: オープンファームウェアの待ち時間が過ぎたとき、どの\n" "OSが起動するかを指定します。" #: ../../help.pm_.c:860 #, fuzzy msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" "あなたのマシンに関する各種のパラメータを示します。ハードウェアにも\n" "よりますが、以下のような項目が出てくるはずです:\n" "\n" " * 「マウス」: マウス。現在のマウス設定を見て、必要ならボタンをクリック\n" "して変更します。\n" "\n" " * 「キーボード」：キーボード。いまのキーボードの割付設定を見て、必要なら\n" "ボタンをクリックして変更します。\n" "\n" " * 「時間帯」: 時間帯　DrakX はデフォルトで、あなたの選んだ言語に応じて\n" "時間帯を推定します。でもここでもキーボードの選択と同じで、言語とは\n" "ちがう国にいるときには、時間帯ボタンを押して、自分の時間帯にあわせた\n" "設定にできます。\n" "\n" " * 「プリンタ」: 「プリンタなし」ボタンを押すと、プリンタ設定ウィザード\n" "が開きます。\n" "\n" " * 「サウンドカード」: サウンドカードが検出されたらここに表示されます。\n" "インストール時には変更できません。\n" "\n" " * 「TV カード」: TV カードが検出されたらここに表示されます。\n" "インストール時には変更できません。\n" "\n" " * 「ISDN カード」: ISDN カードが検出されたらここに表示されます。\n" "ボタンをクリックすると関連パラメータが変えられます。" #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "新しい Mandrake Linux パーティションのインストール用に消去したい\n" "ハードディスクを選んでください。そのハードディスク上のデータは全部\n" "消えて回復できません。注意してください。" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "このハードディスク上のすべてのデータやパーティションを\n" "消去するなら「OK」をクリックしてください。「OK」をクリックしたら、\n" "このハードディスク上に今あるデータやパーティションは、ウィンドウズ\n" "のものを含め、すべて消去されて回復不可能になります。\n" "\n" "この操作を取りやめて、ハードディスク上のデータやパーティションを\n" "そのままにしておくには「キャンセル」をクリックしましょう。" #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "あなたのカーネルに対応したカーネルモジュールにアクセスできません(ファイル%sが" "ありません)。これは普通、起動フロッピーがインストールメディアと対応していない" "ということです（新しい起動フロッピーを作りなおしましょう)" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "%s もフォーマットしてください" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "以下のサーバを選びましたね: %s\n" "\n" "\n" "これらのサーバはデフォルトで有効になります。特にセキュリティ上の\n" "問題はないようですが、この先発生することもあります。その場合には\n" "すぐにアップグレードしてください。\n" "\n" "\n" "本当にこのサーバをインストールしていいですね？\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "システム更新を可能にするため、以下のパッケージを削除します: %s\n" "\n" "\n" "本当にこれらを削除していいですか?\n" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "NIS ドメインがないのでブロードキャストが使えません" #: ../../install_any.pm_.c:879 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "FAT形式のフロッピーをドライブ %s に挿入" #: ../../install_any.pm_.c:883 msgid "This floppy is not FAT formatted" msgstr "このフロッピーは FATフォーマットじゃありません" #: ../../install_any.pm_.c:895 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "この保存したパッケージ選択を使うには、インストールの起動時に「linux " "defcfg=floppy」と指定します。" #: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "ファイル %s の読みとりエラーです" #: ../../install_any.pm_.c:1040 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "エラー発生 - 新しいファイルシステムを構築できるようなデバイスが\n" "見付かりません。なにが原因か、ハードウェアをチェックしてください" #: ../../install_interactive.pm_.c:21 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "あなたのマシン上のハードの中には、「非公開の」ドライバが必要なものが\n" "あります。以下の情報を見てください: %s" #: ../../install_interactive.pm_.c:56 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "root パーティションが見あたりませんね。これは絶対に必要です。\n" "新しくパーティションをつくるか、既存のものをクリックして選びます。\n" "そして“マウントポイント”アクションを選び、「/」にセットします" #: ../../install_interactive.pm_.c:61 msgid "You must have a swap partition" msgstr "スワップパーティションが必要です" #: ../../install_interactive.pm_.c:62 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "スワップパーティションがありません\n" "\n" "構わずに続けますか？" #: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "/boot/efi に FAT パーティションをマウントしてください" #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "フリースペースの使用" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "新しいパーティションに割り当てる十分なフリースペースがありません" #: ../../install_interactive.pm_.c:100 msgid "Use existing partitions" msgstr "既存のパーティションを使用" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "存在しないパーティション" #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "Windows パーティションをループバックに使用" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "どのパーティションにLinux4Winを入れますか" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "サイズを選択" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "ルートパーティションのサイズ (MB)" #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "スワップパーティションのサイズ (MB): " #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "ウィンドウズパーティション上のフリースペースを使用" #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "どのパーティションをリサイズしますか？" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "ウィンドウズファイルシステムの境界を計算" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "FAT リサイザーはパーティション操作ができません。\n" "以下のエラーが発生: %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "ウィンドウズパーティションが断片化しすぎです。“デフラグ”してください。" #: ../../install_interactive.pm_.c:138 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "注意！\n" "\n" "DrakX はこれからウィンドウズのパーティションサイズを変更します。\n" "注意:この操作は危険です。もし事前に scandisk をかけていなければ、\n" "ここでインストールを中断し、scandiskをかけましょう（さらにdefrag\n" "もかけたほうがいいです)。\n" "データもバックアップしてありますか？　いまのうちにして\n" "おいてください。\n" "大丈夫なら Ok を押して下さい。" #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "ウィンドウズ用にどのくらいのサイズを残しておきますが" #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "パーティション %s" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "FAT のリサイズに失敗: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "リサイズやループバック用のFATパーティションがありません (または十分なスペース" "が無い)" #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "全ディスク消去" #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "Windows(TM) を削除" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "複数のハードドライブを持っていますね、どれに linux をインストールしますか？" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "ドライブ %s 上のパーティションおよびデータは全部失われます" #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "パーティションを自分で指定" #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "fdiskを使う" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "%s をパーティションできます。\n" "終わったら、必ず「w」を使って保存しましょう。" #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "ウィンドウズパーティション上のフリースペースが足りません" #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "インストール用の空きが見つかりませんが" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX パーティションウィザードは以下の解法を見付けました:" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "パーティショニングに失敗: %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "ネットワークをたちあげる" #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "ネットワークを停止する" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "エラー発生，うまく処理する方法がわかりません。\n" "自分の責任で続けて下さい。" #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "マウントポイント %s が重なっています" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "だいじなパッケージがいくつかきちんとインストールされませんでした。\n" "CD-ROMか、CD-ROMのドライブがおかしいようです。\n" "インストール済みのコンピュータで、以下のコマンドでCD-ROMをチェック\n" "してみてください：\n" "「 rpm -qpl Mandrake/RPMS/*.rpm 」\n" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "%s へようこそ" #: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769 msgid "No floppy drive available" msgstr "有効なフロッピードライブがありません" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "ステップ 「%s」を始めます\n" #: ../../install_steps_gtk.pm_.c:146 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "システムリソースが足りません。 Mandrake Linux をインストールするには\n" "いくつか問題があります。\n" "この症状が起きたとき、かわりにテキストインストールを試せます。\n" "これをするには、CDROM からブートしたとき、「F1」を押し、「text」と入力して\n" "ください。" #: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237 msgid "Install Class" msgstr "インストールクラス" #: ../../install_steps_gtk.pm_.c:160 msgid "Please choose one of the following classes of installation:" msgstr "以下のインストールクラスをどれか選んでください" #: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683 msgid "Package Group Selection" msgstr "パッケージグループを選択" #: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698 msgid "Individual package selection" msgstr "個別パッケージの選択" #: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621 #, c-format msgid "Total size: %d / %d MB" msgstr "合計サイズ: %d / %d MB" #: ../../install_steps_gtk.pm_.c:334 msgid "Bad package" msgstr "パッケージが壊れています" #: ../../install_steps_gtk.pm_.c:335 #, c-format msgid "Name: %s\n" msgstr "名前: %s\n" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Version: %s\n" msgstr "バージョン: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Size: %d KB\n" msgstr "サイズ: %d KB\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Importance: %s\n" msgstr "重要: %s\n" #: ../../install_steps_gtk.pm_.c:360 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "このパッケージは選択できません。ディスクの空き容量が不足です。" #: ../../install_steps_gtk.pm_.c:365 msgid "The following packages are going to be installed" msgstr "以下のパッケージがインストールされます" #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be removed" msgstr "以下のパッケージが取り除かれます" #: ../../install_steps_gtk.pm_.c:378 msgid "You can't select/unselect this package" msgstr "このパッケージは選択・非選択できません" #: ../../install_steps_gtk.pm_.c:390 msgid "This is a mandatory package, it can't be unselected" msgstr "これは不可欠なパッケージです。非選択にはできません" #: ../../install_steps_gtk.pm_.c:392 msgid "You can't unselect this package. It is already installed" msgstr "このパッケージは非選択にできません。すでにインストール済みです" #: ../../install_steps_gtk.pm_.c:395 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "このパッケージはアップグレードが必要です。\n" "本当に選択解除していいんですか？" #: ../../install_steps_gtk.pm_.c:398 msgid "You can't unselect this package. It must be upgraded" msgstr "このパッケージは選択解除できません。アップグレードが必要です" #: ../../install_steps_gtk.pm_.c:403 msgid "Show automatically selected packages" msgstr "自動選択されたパッケージを表示" #: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 #: ../../standalone/drakbackup_.c:4211 msgid "Install" msgstr "インストール" #: ../../install_steps_gtk.pm_.c:407 msgid "Load/Save on floppy" msgstr "フロッピーにセーブ/ロードする" #: ../../install_steps_gtk.pm_.c:408 msgid "Updating package selection" msgstr "パッケージ選択の更新" #: ../../install_steps_gtk.pm_.c:413 msgid "Minimal install" msgstr "最小インストール" #: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529 msgid "Choose the packages you want to install" msgstr "インストールしたいパッケージを選んで下さい" #: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767 msgid "Installing" msgstr "インストール中" #: ../../install_steps_gtk.pm_.c:450 msgid "Estimating" msgstr "試算しています" #: ../../install_steps_gtk.pm_.c:457 msgid "Time remaining " msgstr "残り時間 " #: ../../install_steps_gtk.pm_.c:469 msgid "Please wait, preparing installation..." msgstr "インストールの準備中、少々お待ちを" #: ../../install_steps_gtk.pm_.c:551 #, c-format msgid "%d packages" msgstr "%d パッケージ" #: ../../install_steps_gtk.pm_.c:556 #, c-format msgid "Installing package %s" msgstr "パッケージ %s のインストール" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 #: ../../standalone/drakautoinst_.c:197 msgid "Accept" msgstr "認める" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 msgid "Refuse" msgstr "拒否" #: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Cd-Rom を交換してください！\n" "「 %s 」という Cd-Rom をドライブにいれて、 Ok を押してください。\n" "CDがなければ、Cancel を押してこの Cd-Rom からのインストールを回避して下さい。" #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612 #: ../../install_steps_interactive.pm_.c:804 #: ../../install_steps_interactive.pm_.c:808 msgid "Go on anyway?" msgstr "かまわず先に進みますか？" #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804 msgid "There was an error ordering packages:" msgstr "パッケージの整列でエラーが発生:" #: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808 msgid "There was an error installing packages:" msgstr "パッケージのインストールでエラーが発生:" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "警告\n" "\n" "以下の条項をしっかり読んでください。少しでも同意できない部分が\n" "あれば次の CD メディアのインストールは認められません。このメディアを\n" "使わずインストールを続けるには「拒否」を押してください。\n" "\n" "\n" "次の CD メディアに含まれるコンポーネントの一部は、GPLや類似ライセンス\n" "が適用されません。その場合、それぞれが独自のライセンス条項や条件で\n" "カバーされることになります。\n" "該当するコンポーネントを使用したり再配布したりする場合には、そうした\n" "個別ライセンスを読んでそれにしたがうようにしてください。\n" "そうしたライセンスはおおむね、当該コンポーネントの移転、複製（バック\n" "アップ目的のものを除く）、再配布、リバースエンジニアリング、分解、\n" "逆コンパイル、変更などを禁じているのがふつうです。\n" "合意に対する違反はただちに、その当該ライセンス下でのあなたの権利を\n" "消失させます。当該ライセンスの条項がそうした権利を認めていない限り\n" "複数のシステムにそのプログラムをインストールしたり、ネットワーク上\n" "で使うようにしたりはできません。不明点があるときには、そのコンポー\n" "ネントの配布者か編集者に直接問い合わせてください。\n" "そうしたコンポーネントの、第三者への移転や複製は、ドキュメンテーション\n" "も含め通常は禁止されています。\n" "\n" "\n" "次のCD メディアのコンポーネントに関する権利のすべては、それぞれの\n" "作者に属し、ソフトウェアプログラムに適用される知的財産と著作権法に\n" "よって保護されています。\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "エラー発生" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "本当にインストールを中断しますか？" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "ソフト使用ライセンス条項" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "はじめに\n" "\n" "本オペレーティングシステムおよびMandrake Linuxディストリビューションで\n" "提供される各種のコンポーネントを、以下では「ソフトウェア製品」と呼ぶ。\n" "ソフトウェア製品は、オペレーティングシステムおよびMandrake Linuxディス\n" "トリビューションで提供される各種のコンポーネントに関連するプログラム群\n" "やメソッド、きそくやドキュメンテーションを含むが、それに限られるもので\n" "はない。\n" "\n" "\n" "1. ライセンス同意事項\n" "\n" "この文書を慎重に読んでください。本文書はあなたとMandrake S.A.との間で\n" "締結される、ソフトウェア製品に適用されるライセンス同意事項です。\n" "ソフトウェア製品をいかなる形であれインストール、複製、使用することで\n" "あなたは明示的に、本ライセンスの全条件や条項に従うことを受け入れ\n" "完全に同意したものとされます。\n" "本ライセンスのいかなる部分であれ同意できなければ、ソフトウェア製品の\n" "インストール、複製、使用は認められません。\n" "本ライセンスの条項や条件に適合しない形でソフトウェア製品をインストール\n" "複製、利用しようとする試みは無効であり、本ライセンス下でのあなたの権利\n" "を剥奪することとなります。ライセンスの破棄に伴い、あなたはソフトウェア\n" "製品の複製すべてを即座に破壊しなければなりません。\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:197 msgid "Are you sure you refuse the licence?" msgstr "ライセンスを本当に拒否してよろしいですか？" #: ../../install_steps_interactive.pm_.c:217 #: ../../install_steps_interactive.pm_.c:995 #: ../../standalone/keyboarddrake_.c:25 msgid "Keyboard" msgstr "キーボード" #: ../../install_steps_interactive.pm_.c:218 msgid "Please choose your keyboard layout." msgstr "キーボードレイアウトは何ですか？" #: ../../install_steps_interactive.pm_.c:219 msgid "Here is the full list of keyboards available" msgstr "使えるキーボードレイアウトの一覧を表示します。" #: ../../install_steps_interactive.pm_.c:237 msgid "Which installation class do you want?" msgstr "どのインストールクラスを望みますか？" #: ../../install_steps_interactive.pm_.c:241 msgid "Install/Update" msgstr "インストール/更新" #: ../../install_steps_interactive.pm_.c:241 msgid "Is this an install or an update?" msgstr "インストールですか，更新ですか？" #: ../../install_steps_interactive.pm_.c:250 msgid "Recommended" msgstr "推奨" #: ../../install_steps_interactive.pm_.c:253 #: ../../install_steps_interactive.pm_.c:256 msgid "Expert" msgstr "エキスパート" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade" msgstr "更新" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade packages only" msgstr "パッケージだけを更新" #: ../../install_steps_interactive.pm_.c:282 msgid "Please choose the type of your mouse." msgstr "マウスの型はなんですか？" #: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52 msgid "Mouse Port" msgstr "マウスポート" #: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53 msgid "Please choose on which serial port your mouse is connected to." msgstr "マウスはどのシリアルポートにつながっていますか？" #: ../../install_steps_interactive.pm_.c:297 msgid "Buttons emulation" msgstr "ボタンエミュレーション" #: ../../install_steps_interactive.pm_.c:299 msgid "Button 2 Emulation" msgstr "ボタン2のエミュレーション" #: ../../install_steps_interactive.pm_.c:300 msgid "Button 3 Emulation" msgstr "ボタン3のエミュレーション" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring PCMCIA cards..." msgstr "PCMCIAカードの設定中..." #: ../../install_steps_interactive.pm_.c:321 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:328 msgid "Configuring IDE" msgstr "IDE の設定" #: ../../install_steps_interactive.pm_.c:328 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:345 msgid "No partition available" msgstr "使えるパーティションがありません" #: ../../install_steps_interactive.pm_.c:348 msgid "Scanning partitions to find mount points" msgstr "パーティションをスキャンしてマウントポイントを探しています" #: ../../install_steps_interactive.pm_.c:356 msgid "Choose the mount points" msgstr "マウントポイントの選択" #: ../../install_steps_interactive.pm_.c:386 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "1MB ブートストラップ用の空きスペースがありません！　インストールは続けます" "が、システムの起動には DiskDrake でブーツストラップパーティションを作ってくだ" "さい." #: ../../install_steps_interactive.pm_.c:395 msgid "No root partition found to perform an upgrade" msgstr "更新できるルートパーティションが見つかりません" #: ../../install_steps_interactive.pm_.c:396 msgid "Root Partition" msgstr "ルートパーティション" #: ../../install_steps_interactive.pm_.c:397 msgid "What is the root partition (/) of your system?" msgstr "システムのルートパーティション(/) はなんですか？" #: ../../install_steps_interactive.pm_.c:411 msgid "You need to reboot for the partition table modifications to take place" msgstr "パーティションテーブルの変更を反映するにはリブートしてください" #: ../../install_steps_interactive.pm_.c:435 msgid "Choose the partitions you want to format" msgstr "フォーマットするパーティションを選んでください" #: ../../install_steps_interactive.pm_.c:436 msgid "Check bad blocks?" msgstr "不良ブロックを検査しますか？" #: ../../install_steps_interactive.pm_.c:463 msgid "Formatting partitions" msgstr "パーティションをフォーマット" #: ../../install_steps_interactive.pm_.c:465 #, c-format msgid "Creating and formatting file %s" msgstr "ファイル %s の作成とフォーマット" #: ../../install_steps_interactive.pm_.c:470 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" "ファイルシステム %s のチェックに失敗。エラーを修復しますか？（ただしデータが" "一部消えるかもしれませんよ)" #: ../../install_steps_interactive.pm_.c:472 msgid "Not enough swap space to fulfill installation, please add some" msgstr "インストールに十分なスワップがありません，スワップを加えて下さい" #: ../../install_steps_interactive.pm_.c:479 msgid "Looking for available packages and rebuilding rpm database..." msgstr "手持ちのパッケージを探してrpmデータベース再構築中..." #: ../../install_steps_interactive.pm_.c:480 msgid "Looking for available packages..." msgstr "手持ちのパッケージをさがしています" #: ../../install_steps_interactive.pm_.c:483 msgid "Looking at packages already installed..." msgstr "インストール済みパッケージを調べています..." #: ../../install_steps_interactive.pm_.c:487 msgid "Finding packages to upgrade..." msgstr "アップグレードするパッケージをさがしています" #: ../../install_steps_interactive.pm_.c:505 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "インストールやアップグレードに必要なディスクの空き容量が不足です。 (%d > %d)" #: ../../install_steps_interactive.pm_.c:541 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "フロッピーへのパッケージ選択の保存か読み込みを選んでください。\n" "形式は auto_install で生成したフロッピーと同じです。" #: ../../install_steps_interactive.pm_.c:543 msgid "Load from floppy" msgstr "フロッピーから読み込む" #: ../../install_steps_interactive.pm_.c:543 msgid "Save on floppy" msgstr "フロッピーにセーブする" #: ../../install_steps_interactive.pm_.c:547 msgid "Loading from floppy" msgstr "フロッピーから読み込み中" #: ../../install_steps_interactive.pm_.c:547 msgid "Package selection" msgstr "パッケージを選択" #: ../../install_steps_interactive.pm_.c:552 msgid "Insert a floppy containing package selection" msgstr "パッケージ選択の入ったフロッピーを挿入" #: ../../install_steps_interactive.pm_.c:634 msgid "Selected size is larger than available space" msgstr "選んだもののサイズは空きスペースを越えています" #: ../../install_steps_interactive.pm_.c:649 msgid "Type of install" msgstr "インストールの種類" #: ../../install_steps_interactive.pm_.c:650 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "パッケージグループが選ばれていません。\n" "最低限欲しいインストールを選んでください: " #: ../../install_steps_interactive.pm_.c:653 msgid "With X" msgstr "X を使う" #: ../../install_steps_interactive.pm_.c:655 msgid "With basic documentation (recommended!)" msgstr "基本的なドキュメンテーションを入れる（推奨！）" #: ../../install_steps_interactive.pm_.c:656 msgid "Truly minimal install (especially no urpmi)" msgstr "本当に最低限のインストール（urpmi もなし）" #: ../../install_steps_interactive.pm_.c:741 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "上記の一覧のCDがすべてそろっていれば、Okをクリックしましょう。\n" "CDが一つもなければ、キャンセルをクリックしてください。\n" "手元にないCDがあれば、それを選択からはずしてからOkをクリックします。" #: ../../install_steps_interactive.pm_.c:746 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "「 %s 」というCd-Rom" #: ../../install_steps_interactive.pm_.c:767 msgid "Preparing installation" msgstr "インストールの準備" #: ../../install_steps_interactive.pm_.c:776 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "パッケージ %s をインストール\n" "%d%%" #: ../../install_steps_interactive.pm_.c:822 msgid "Post-install configuration" msgstr "インストール設定を確定" #: ../../install_steps_interactive.pm_.c:828 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "使った起動フロッピーをドライブ %s に挿入" #: ../../install_steps_interactive.pm_.c:834 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "更新モジュールフロッピーをドライブ %s に挿入して下さい" #: ../../install_steps_interactive.pm_.c:861 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "ディストリビューション公開時以降に更新されたパッケージを\n" "ダウンロードできます。セキュリティフィックスやバグフィックスが得られます。\n" "パッケージのダウンロードにはインターネット接続が必要です。\n" "\n" "更新パッケージをインストールしますか？" #: ../../install_steps_interactive.pm_.c:876 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "Mandrake Linux サイトに接続してミラー一覧を取得しています" #: ../../install_steps_interactive.pm_.c:881 msgid "Choose a mirror from which to get the packages" msgstr "どのサイトからパッケージを持ってくるかを選択" #: ../../install_steps_interactive.pm_.c:890 msgid "Contacting the mirror to get the list of available packages..." msgstr "サイトに接続してパッケージ一覧を取得しています" #: ../../install_steps_interactive.pm_.c:918 msgid "Which is your timezone?" msgstr "あなたの時間帯はどれですか？" #: ../../install_steps_interactive.pm_.c:923 msgid "Hardware clock set to GMT" msgstr "ハードウェアクロックは GMT にセットしてあります" #: ../../install_steps_interactive.pm_.c:924 msgid "Automatic time synchronization (using NTP)" msgstr "自動時間あわせ（NTPを使う）" #: ../../install_steps_interactive.pm_.c:931 msgid "NTP Server" msgstr "NTP サーバ" #: ../../install_steps_interactive.pm_.c:965 #: ../../install_steps_interactive.pm_.c:972 msgid "Remote CUPS server" msgstr "リモートCUPS サーバ" #: ../../install_steps_interactive.pm_.c:966 msgid "No printer" msgstr "プリンタなし" #: ../../install_steps_interactive.pm_.c:982 msgid "Do you have an ISA sound card?" msgstr "ISA サウンドカードはありますか？" #: ../../install_steps_interactive.pm_.c:984 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "インストール後に「sndconfig」を実行してサウンドカードを設定してください。" #: ../../install_steps_interactive.pm_.c:986 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "サウンドカードが検出できませんでした。\n" "インストール後に「harddrake」を試してください" #: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27 msgid "Summary" msgstr "まとめ" #: ../../install_steps_interactive.pm_.c:994 msgid "Mouse" msgstr "マウス" #: ../../install_steps_interactive.pm_.c:996 msgid "Timezone" msgstr "時間帯" #: ../../install_steps_interactive.pm_.c:997 #: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844 msgid "Printer" msgstr "プリンタ" #: ../../install_steps_interactive.pm_.c:999 msgid "ISDN card" msgstr "ISDNカード" #: ../../install_steps_interactive.pm_.c:1003 #: ../../install_steps_interactive.pm_.c:1009 msgid "Sound card" msgstr "サウンドカード" #: ../../install_steps_interactive.pm_.c:1012 msgid "TV card" msgstr "テレビカード" #: ../../install_steps_interactive.pm_.c:1055 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1084 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1056 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1093 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1057 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1107 msgid "Windows Domain" msgstr "ウィンドウズのドメイン" #: ../../install_steps_interactive.pm_.c:1058 #: ../../install_steps_interactive.pm_.c:1080 msgid "Local files" msgstr "ローカルファイル" #: ../../install_steps_interactive.pm_.c:1067 #: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24 msgid "Set root password" msgstr "ルートパスワード" #: ../../install_steps_interactive.pm_.c:1069 msgid "No password" msgstr "パスワードなし" #: ../../install_steps_interactive.pm_.c:1074 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "このパスワードは簡単すぎます（最低でも %d 文字使ってください）" #: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72 #: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144 msgid "Authentication" msgstr "認証" #: ../../install_steps_interactive.pm_.c:1088 msgid "Authentication LDAP" msgstr "認証LDAP" #: ../../install_steps_interactive.pm_.c:1089 msgid "LDAP Base dn" msgstr "LDAPベースdn" #: ../../install_steps_interactive.pm_.c:1090 msgid "LDAP Server" msgstr "LDAPサーバ" #: ../../install_steps_interactive.pm_.c:1096 msgid "Authentication NIS" msgstr "認証NIS" #: ../../install_steps_interactive.pm_.c:1097 msgid "NIS Domain" msgstr "NIS ドメイン" #: ../../install_steps_interactive.pm_.c:1098 msgid "NIS Server" msgstr "NIS サーバ" #: ../../install_steps_interactive.pm_.c:1104 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "W2K PDCでこれを使うには、たぶんadminに以下を実行してもらう必要がありますC:" "\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add そして" "サーバを再起動します。\n" "またマシンをウィンドウズ(TM)ドメインに参加させるにはドメイン管理者のユーザ名/" "パスワードが必要です。\n" "ネットワークが有効になっていなければ、Drakxはネットワーク設定が終わってからド" "メインに参加しようとします。\n" "この設定が何らかの理由で失敗し、ドメイン認証が機能しなければ、システムを起動" "してから、ウィンドウズ(TM)のドメインと管理者のユーザ名/パスワードを使っ" "て'smbpasswd -j DOMAIN -U USER%PASSWORD' を実行します。\n" "'wbinfo -t' コマンドをつかうと、認証用の秘密が大丈夫かチェックできます。" #: ../../install_steps_interactive.pm_.c:1106 msgid "Authentication Windows Domain" msgstr "ウィンドウズドメイン認証" #: ../../install_steps_interactive.pm_.c:1108 msgid "Domain Admin User Name" msgstr "ドメイン管理者名" #: ../../install_steps_interactive.pm_.c:1109 msgid "Domain Admin Password" msgstr "ドメイン管理者パスワード" #: ../../install_steps_interactive.pm_.c:1144 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "カスタムブートディスクがあると、通常のブートローダを使わずに Linux を\n" "起動できます。SILO をインストールしたくない場合や、他の OS が\n" " SILO を削除する場合、またはハードウェア設定のため SILO がうまく作動\n" "しない場合に使用できます。\n" "カスタムブートディスクは、Mandrake のシステム復旧用のレスキューイメージ\n" "としても使用できます。これがあればシステムが危機におちいったときに\n" "復旧するのが楽になります。\n" "ブートディスクを作るならば、フロッピィディスクをドライブに挿入し、\n" "「OK」を押してください。" #: ../../install_steps_interactive.pm_.c:1160 msgid "First floppy drive" msgstr "最初のフロッピードライブ" #: ../../install_steps_interactive.pm_.c:1161 msgid "Second floppy drive" msgstr "二番目のフロッピードライブ" #: ../../install_steps_interactive.pm_.c:1162 #: ../../printer/printerdrake.pm_.c:2397 msgid "Skip" msgstr "スキップ" #: ../../install_steps_interactive.pm_.c:1167 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "カスタムブートディスクがあると、通常のブートローダを使わずに Linux を\n" "起動できます。LILO (またはGRUB)をインストールしたくない場合や、他の OS が\n" " LILO を削除する場合、またはハードウェア設定のため LILO がうまく作動\n" "しない場合に使用できます。\n" "カスタムブートディスクは、Mandrake のシステム復旧用のレスキューイメージ\n" "としても使用できます。これがあればシステムが危機におちいったときに\n" "復旧するのが楽になります。ブートディスクを作りますか？\n" "%s" #: ../../install_steps_interactive.pm_.c:1173 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(警告！　root パーティションに XFS を使っていますね。\n" "1.44 Mb フロッピーで起動ディスクを作るのはたぶん無理です。\n" "XFS はとても大きなドライバが必要だからです)." #: ../../install_steps_interactive.pm_.c:1181 msgid "Sorry, no floppy drive available" msgstr "有効なフロッピードライブがありません，ごめんなさい" #: ../../install_steps_interactive.pm_.c:1185 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "ブートディスクを作りたいフロッピィドライブを選択" #: ../../install_steps_interactive.pm_.c:1189 #, c-format msgid "Insert a floppy in %s" msgstr "フロッピーをドライブ %s に挿入" #: ../../install_steps_interactive.pm_.c:1192 msgid "Creating bootdisk..." msgstr "ブートディスクの作成" #: ../../install_steps_interactive.pm_.c:1199 msgid "Preparing bootloader..." msgstr "ブートローダの準備" #: ../../install_steps_interactive.pm_.c:1210 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" "とても古いか、未知のマシンを使っているようですね。\n" "yaboot ブートローダはこれでは使えません。\n" "インストールは続けますが、マシンの起動には\n" "BootX を使ってください" #: ../../install_steps_interactive.pm_.c:1216 msgid "Do you want to use aboot?" msgstr "aboot を使いますか？" #: ../../install_steps_interactive.pm_.c:1219 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "aboot インストール時にエラー発生。\n" "無理にインストールしてみますか？　ただし最初のパーティションが破壊されます。" #: ../../install_steps_interactive.pm_.c:1226 msgid "Installing bootloader" msgstr "ブートローダインストール中" #: ../../install_steps_interactive.pm_.c:1232 msgid "Installation of bootloader failed. The following error occured:" msgstr "ブートローダのインストールに失敗しました。以下のエラーが発生:" #: ../../install_steps_interactive.pm_.c:1240 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "オープンファームウェア起動デバイスを変更しないと、ブートローダが\n" "有効にならないかもしれません。再起動してブートローダのプロンプト\n" "が出なかったら、再起動時に Command-Option-O-F を押してこう入力します:\n" " setenv boot-device %s,\\\\:tbxi\n" " それからこうタイプします: shut-down\n" "次の起動時にはブートローダのプロンプトが出るはずです。" #: ../../install_steps_interactive.pm_.c:1274 #: ../../standalone/drakautoinst_.c:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "空のフロッピーをドライブ %s に挿入して下さい" #: ../../install_steps_interactive.pm_.c:1278 msgid "Creating auto install floppy..." msgstr "インストールフロッピーの自動作成" #: ../../install_steps_interactive.pm_.c:1289 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "いくつかのインストールステップが不完全です。\n" "\n" "本当に終了しますか？" #: ../../install_steps_interactive.pm_.c:1300 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "おめでとうございます!　インストール完了です。\n" "ブート用メディアを抜いて、リターンを押して再起動して下さい。\n" "\n" "\n" "このバージョンの Mandrake Linux のバグ修正情報は、\n" "\n" "\n" "%s で調べられます。\n" "\n" "\n" "インストール後の設定についてはユーザガイドの「インストールした後」の\n" "章を参照して下さい。" #: ../../install_steps_interactive.pm_.c:1313 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../install_steps_interactive.pm_.c:1318 msgid "Generate auto install floppy" msgstr "インストールフロッピーの自動作成" #: ../../install_steps_interactive.pm_.c:1320 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "自動インストールは、希望次第で徹底的に自動化できます。\n" "この場合、ハードディスクは完全に書き換えられますよ！\n" "(これは別のマシンへのインストール用のものです).\n" "\n" #: ../../install_steps_interactive.pm_.c:1325 msgid "Automated" msgstr "全自動" #: ../../install_steps_interactive.pm_.c:1325 msgid "Replay" msgstr "再生" #: ../../install_steps_interactive.pm_.c:1328 msgid "Save packages selection" msgstr "パッケージ選択の保存" #: ../../install_steps_newt.pm_.c:20 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux インストール %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr " / 要素間の移動 | 選択 | 次の画面 " #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "kdesu がありません" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "consolehelper がありません" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "ファイルを選択" #: ../../interactive.pm_.c:318 msgid "Advanced" msgstr "高度な選択" #: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117 msgid "Basic" msgstr "基本" #: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158 #: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434 msgid "<- Previous" msgstr "<- もどる" #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087 #: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143 msgid "Next" msgstr "次" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "不正な選択，もう一度試して下さい\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "どれにしますか？（デフォルトは %s）" #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "以下のエントリも入力してください:\n" "%s" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "どれにしますか？（0/1, デフォルトは %s）" #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" msgstr "ボタン「%s」: %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" msgstr "このボタンをクリックしますか？" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr "無効なエントリには「void」と入力してください" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "どれにしますか？（デフォルトは `%s'%s）" #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> 選択肢はいろいろあります (%s).\n" #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "10のなかでどれを編集したいか最初の数字を入れてください。\n" "あるいは単に Enter を押せば先に進みます。\n" "どれにしますか？" #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> 注意、ラベルが変わりました:\n" "%s" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "登録しなおし" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188 msgid "Czech (QWERTZ)" msgstr "チェコ (QWERTZ)" #: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190 msgid "German" msgstr "ドイツ" #: ../../keyboard.pm_.c:155 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Spanish" msgstr "スペイン" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "Finnish" msgstr "フィンランド" #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200 msgid "French" msgstr "フランス" #: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233 msgid "Norwegian" msgstr "ノルウェー" #: ../../keyboard.pm_.c:160 msgid "Polish" msgstr "ポーランド" #: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241 msgid "Russian" msgstr "ロシア" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243 msgid "Swedish" msgstr "スウェーデン" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259 msgid "UK keyboard" msgstr "イギリス式キーボード" #: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260 msgid "US keyboard" msgstr "アメリカ式キーボード" #: ../../keyboard.pm_.c:167 msgid "Albanian" msgstr "アルバニア" #: ../../keyboard.pm_.c:168 msgid "Armenian (old)" msgstr "アルメニア（古い）" #: ../../keyboard.pm_.c:169 msgid "Armenian (typewriter)" msgstr "アルメニア（タイプライター）" #: ../../keyboard.pm_.c:170 msgid "Armenian (phonetic)" msgstr "アルメニア（発音記号）" #: ../../keyboard.pm_.c:175 msgid "Azerbaidjani (latin)" msgstr "アゼルバイジャン(ラテン)" #: ../../keyboard.pm_.c:177 msgid "Belgian" msgstr "ベルギー" #: ../../keyboard.pm_.c:178 msgid "Bengali" msgstr "ベンガル" #: ../../keyboard.pm_.c:179 msgid "Bulgarian (phonetic)" msgstr "アルメニア（発音記号）" #: ../../keyboard.pm_.c:180 msgid "Bulgarian (BDS)" msgstr "ブルガリア (BDS)" #: ../../keyboard.pm_.c:181 msgid "Brazilian (ABNT-2)" msgstr "ブラジル" #: ../../keyboard.pm_.c:184 msgid "Bosnian" msgstr "ボスニア" #: ../../keyboard.pm_.c:185 msgid "Belarusian" msgstr "ベラルーシ" #: ../../keyboard.pm_.c:186 msgid "Swiss (German layout)" msgstr "スイス（ドイツ式配列）" #: ../../keyboard.pm_.c:187 msgid "Swiss (French layout)" msgstr "スイス（フランス式配列）" #: ../../keyboard.pm_.c:189 msgid "Czech (QWERTY)" msgstr "チェコ (QWERTY)" #: ../../keyboard.pm_.c:191 msgid "German (no dead keys)" msgstr "ドイツ（デッドキーなし）" #: ../../keyboard.pm_.c:192 msgid "Devanagari" msgstr "デヴァナガーリー" #: ../../keyboard.pm_.c:193 msgid "Danish" msgstr "デンマーク" #: ../../keyboard.pm_.c:194 msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../keyboard.pm_.c:195 msgid "Dvorak (Norwegian)" msgstr "Dvorak (ノルウェー)" #: ../../keyboard.pm_.c:196 msgid "Dvorak (Swedish)" msgstr "Dvorak (スウェーデン)" #: ../../keyboard.pm_.c:197 msgid "Estonian" msgstr "エストニア" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Russian\" layout)" msgstr "グルジア（「ロシア式」配列）" #: ../../keyboard.pm_.c:202 msgid "Georgian (\"Latin\" layout)" msgstr "グルジア（「ラテン」配列）" #: ../../keyboard.pm_.c:203 msgid "Greek" msgstr "ギリシャ" #: ../../keyboard.pm_.c:204 msgid "Gujarati" msgstr "グジャラート" #: ../../keyboard.pm_.c:205 msgid "Gurmukhi" msgstr "グルムキ" #: ../../keyboard.pm_.c:206 msgid "Hungarian" msgstr "ハンガリー" #: ../../keyboard.pm_.c:207 msgid "Croatian" msgstr "クロアチア" #: ../../keyboard.pm_.c:208 msgid "Israeli" msgstr "イスラエル" #: ../../keyboard.pm_.c:209 msgid "Israeli (Phonetic)" msgstr "イスラエル（発音記号）" #: ../../keyboard.pm_.c:210 msgid "Iranian" msgstr "イラン" #: ../../keyboard.pm_.c:211 msgid "Icelandic" msgstr "アイスランド" #: ../../keyboard.pm_.c:212 msgid "Italian" msgstr "イタリア" #: ../../keyboard.pm_.c:213 msgid "Inuktitut" msgstr "イヌクティトト" #: ../../keyboard.pm_.c:214 msgid "Japanese 106 keys" msgstr "日本語106キーボード" #: ../../keyboard.pm_.c:217 msgid "Korean keyboard" msgstr "朝鮮式キーボード" #: ../../keyboard.pm_.c:218 msgid "Latin American" msgstr "ラテンアメリカ" #: ../../keyboard.pm_.c:219 msgid "Laotian" msgstr "ラオス" #: ../../keyboard.pm_.c:220 msgid "Lithuanian AZERTY (old)" msgstr "リトアニア AZERTY (旧)" #: ../../keyboard.pm_.c:222 msgid "Lithuanian AZERTY (new)" msgstr "リトアニア AZERTY (新)" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"number row\" QWERTY" msgstr "リトアニア 「数字列」 QWERTY" #: ../../keyboard.pm_.c:224 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "リトアニア 「発音」 QWERTY" #: ../../keyboard.pm_.c:225 msgid "Latvian" msgstr "ラトヴィア" #: ../../keyboard.pm_.c:226 msgid "Malayalam" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Macedonian" msgstr "マケドニア" #: ../../keyboard.pm_.c:228 msgid "Myanmar (Burmese)" msgstr "ミャンマー（ビルマ）" #: ../../keyboard.pm_.c:229 msgid "Mongolian (cyrillic)" msgstr "モンゴル(cyrillic)" #: ../../keyboard.pm_.c:230 msgid "Maltese (UK)" msgstr "マルタ (UK)" #: ../../keyboard.pm_.c:231 msgid "Maltese (US)" msgstr "マルタ (US)" #: ../../keyboard.pm_.c:232 msgid "Dutch" msgstr "オランダ" #: ../../keyboard.pm_.c:234 msgid "Polish (qwerty layout)" msgstr "ポーランド（qwerty 配列）" #: ../../keyboard.pm_.c:235 msgid "Polish (qwertz layout)" msgstr "ポーランド（qwertz配列）" #: ../../keyboard.pm_.c:236 msgid "Portuguese" msgstr "ポルトガル" #: ../../keyboard.pm_.c:237 msgid "Canadian (Quebec)" msgstr "カナダ（ケベック）" #: ../../keyboard.pm_.c:239 msgid "Romanian (qwertz)" msgstr "ルーマニア（qwertz）" #: ../../keyboard.pm_.c:240 msgid "Romanian (qwerty)" msgstr "ルーマニア（qwerty）" #: ../../keyboard.pm_.c:242 msgid "Russian (Yawerty)" msgstr "ロシア（Yawerty）" #: ../../keyboard.pm_.c:244 msgid "Slovenian" msgstr "スロベニア" #: ../../keyboard.pm_.c:245 msgid "Slovakian (QWERTZ)" msgstr "スロバキア (QWERTZ)" #: ../../keyboard.pm_.c:246 msgid "Slovakian (QWERTY)" msgstr "スロバキア (QWERTY)" #: ../../keyboard.pm_.c:248 msgid "Serbian (cyrillic)" msgstr "セルビア(cyrillic)" #: ../../keyboard.pm_.c:250 msgid "Tamil (Unicode)" msgstr "タミル (Unicode)" #: ../../keyboard.pm_.c:251 msgid "Tamil (TSCII)" msgstr "タミル (TSCII)" #: ../../keyboard.pm_.c:252 msgid "Thai keyboard" msgstr "タイ　キーボード" #: ../../keyboard.pm_.c:254 msgid "Tajik keyboard" msgstr "タジク　キーボード" #: ../../keyboard.pm_.c:255 msgid "Turkish (traditional \"F\" model)" msgstr "トルコ（伝統的「Ｆ」モデル）" #: ../../keyboard.pm_.c:256 msgid "Turkish (modern \"Q\" model)" msgstr "トルコ（現代「Ｑ」モデル）" #: ../../keyboard.pm_.c:258 msgid "Ukrainian" msgstr "ウクライナ" #: ../../keyboard.pm_.c:261 msgid "US keyboard (international)" msgstr "アメリカ式キーボード（国際式）" #: ../../keyboard.pm_.c:262 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "ベトナム 「数字列」 QWERTY" #: ../../keyboard.pm_.c:263 msgid "Yugoslavian (latin)" msgstr "ユーゴスラビア（ラテン）" #: ../../keyboard.pm_.c:270 msgid "Right Alt key" msgstr "右 Alt キー" #: ../../keyboard.pm_.c:271 msgid "Both Shift keys simultaneously" msgstr "左右のシフトキーを同時に" #: ../../keyboard.pm_.c:272 msgid "Control and Shift keys simultaneously" msgstr "Control とシフトを同時に" #: ../../keyboard.pm_.c:273 msgid "CapsLock key" msgstr "CapsLock キー" #: ../../keyboard.pm_.c:274 msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl と Alt キーを同時に" #: ../../keyboard.pm_.c:275 msgid "Alt and Shift keys simultaneously" msgstr "Alt とシフトキーを同時に" #: ../../keyboard.pm_.c:276 msgid "\"Menu\" key" msgstr "「メニュー」キー" #: ../../keyboard.pm_.c:277 msgid "Left \"Windows\" key" msgstr "左「ウィンドウズ」キー" #: ../../keyboard.pm_.c:278 msgid "Right \"Windows\" key" msgstr "右「ウィンドウズ」キー" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "巡回マウント %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "まず論理ボリュームを削除してください。\n" #: ../../modules.pm_.c:290 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" "2.2カーネル用の PCMCIA サポートはもう含まれていません。\n" "2.4　カーネルを使ってください。" #: ../../modules/interactive.pm_.c:16 msgid "You can configure each parameter of the module here." msgstr "モジュールの各パラメータをここで設定できます。" #: ../../modules/parameters.pm_.c:18 #, fuzzy msgid "modinfo is not available" msgstr "有効なフロッピードライブがありません" #: ../../modules/parameters.pm_.c:50 msgid "a number" msgstr "番号" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "%d コンマ区切りの数字" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "%d コンマ区切りの文字列" #: ../../modules/parameters.pm_.c:54 msgid "comma separated numbers" msgstr "コンマ区切りの数字" #: ../../modules/parameters.pm_.c:54 msgid "comma separated strings" msgstr "コンマ区切りの文字列" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - マウス" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "汎用 PS/2 ホイールマウス" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 msgid "Microsoft Explorer" msgstr "マイクロソフトエクスプローラ" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 ボタン" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "汎用の2ボタンマウス" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "ホイール" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "マイクロソフト・インテリマウス（シリアル）" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "汎用の3ボタンマウス" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "マイクロソフト・インテリマウス（PS/2）" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "Logitech CC シリーズ (シリアル)" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (シリアル, 古い C7 タイプ)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "バスマウス" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2ボタン" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3ボタン" #: ../../mouse.pm_.c:75 msgid "none" msgstr "なし" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "マウスなし" #: ../../mouse.pm_.c:490 msgid "Please test the mouse" msgstr "マウスをテストしてみてください。" #: ../../mouse.pm_.c:491 msgid "To activate the mouse," msgstr "マウスを有効にするには、" #: ../../mouse.pm_.c:492 msgid "MOVE YOUR WHEEL!" msgstr "ホイールを動かしてください！" #: ../../my_gtk.pm_.c:65 msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "" "adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-1,-*-fixed-medium-r-" "normal--24-*-100-100-c-*-jisx0208.1983-0,*" #: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435 msgid "Finish" msgstr "完了" #: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057 #: ../../ugtk2.pm_.c:435 msgid "Next ->" msgstr "次 ->" #: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926 msgid "Is this correct?" msgstr "正しく表示出来ましたか？" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011 msgid "Info" msgstr "情報" #: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036 msgid "Expand Tree" msgstr "ツリーをのばす" #: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037 msgid "Collapse Tree" msgstr "ツリーを縮める" #: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038 msgid "Toggle between flat and group sorted" msgstr "そのままとグループ別を切り替え" #: ../../network/adsl.pm_.c:23 msgid "use pppoe" msgstr "pppoeを使う" #: ../../network/adsl.pm_.c:24 msgid "use pptp" msgstr "pptpを使う" #: ../../network/adsl.pm_.c:25 msgid "use dhcp" msgstr "dhcpを使う" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: ../../network/adsl.pm_.c:27 msgid "Sagem (using pppoe) usb" msgstr "" #: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "インターネットへ接続" #: ../../network/adsl.pm_.c:30 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "adsl に接続するふつうのやり方は、pppoeです。\n" "でも、pptpや、dhcpしか使わない接続もあります。\n" "わからなければ、「pppoeを使う」を選んでください。" #: ../../network/adsl.pm_.c:166 msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/drakfirewall.pm_.c:12 msgid "Web Server" msgstr "Web サーバ" #: ../../network/drakfirewall.pm_.c:17 msgid "Domain Name Server" msgstr "ドメイン名サーバ" #: ../../network/drakfirewall.pm_.c:32 msgid "Mail Server" msgstr "メールサーバ" #: ../../network/drakfirewall.pm_.c:37 msgid "POP and IMAP Server" msgstr "POPとIMAPサーバ" #: ../../network/drakfirewall.pm_.c:111 msgid "No network card" msgstr "ネットワークカードが見付かりません" #: ../../network/drakfirewall.pm_.c:129 msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "drakfirewall設定\n" "\n" "この Mandrake Linux マシン用の個人用ファイアーウォール設定をします。\n" "強力な専用ファイアーウォール向けには、専用の MandrakeSecurity\n" "ファイアーウォールパッケージを検討してください。" #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "インターネットでどのサービスに接続を許可しますか？" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "その他各種ポートをここで入力できます。\n" "有効な入力例: 139/tcp 139/udp.\n" "詳しくは /etc/services を見てください。" #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "無効なポートがあります: %s.\n" "正しい形式は \"port/tcp\" または \"port/udp\", \n" "で、port は 1 から 65535の数字です。" #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "全部（ファイアーウォールなし）" #: ../../network/drakfirewall.pm_.c:169 msgid "Other ports" msgstr "その他ポート" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client" msgstr "" "どのdhcpクライアントを使いますか？\n" "デフォルトは dhcp-clientです" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "システム上にイーサネットアダプタが見つかりません。この種類の\n" "接続は設定できません。" #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234 msgid "Choose the network interface" msgstr "ネットワークインターフェイスの選択" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "インターネット接続に使うネットワークアダプタを選びましょう" #: ../../network/ethernet.pm_.c:176 msgid "no network card found" msgstr "ネットワークカードが見付かりません" #: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349 msgid "Configuring network" msgstr "ネットワークの設定" #: ../../network/ethernet.pm_.c:201 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "ホスト名が分かるなら、それを入力して下さい。\n" "いくつかのDHCPサーバは動作するのにホスト名を必要とします。\n" "ホスト名は“mybox.mylab.myco.com”のように制限して下さい。" #: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354 msgid "Host name" msgstr "ホスト名:" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103 #: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171 #: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245 #: ../../network/netconnect.pm_.c:253 msgid "Network Configuration Wizard" msgstr "ネットワーク設定ウィザード" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "外付 ISDN モデム" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "内蔵ISDNカード" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "どの種類のISDN接続ですか？" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "どのISDN 設定がいいですか?\n" "\n" "* 古い設定は isdn4net を使います。強力なツールがありますが、\n" " 初心者には設定がむずかしいし、標準ではありません。\n" "\n" "* 新しい設定はわかりやすいし標準的ですが、ツールは少ないです。\n" "\n" "お勧めは、後者の軽い設定のほうです。\n" "\n" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "新しい設定（isdn-light)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "古い設定 (isdn4net)" #: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184 #: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202 #: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219 msgid "ISDN Configuration" msgstr "ISDNの設定" #: ../../network/isdn.pm_.c:166 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "プロバイダを選んでください。\n" "もしリストになければ、Unlistedを選んでください。" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol" msgstr "ヨーロッパのプロトコル" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol (EDSS1)" msgstr "ヨーロッパプロトコル (EDSS1)" #: ../../network/isdn.pm_.c:181 msgid "Protocol for the rest of the world" msgstr "世界のその他用プロトコル" #: ../../network/isdn.pm_.c:181 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "世界のその他用プロトコル \n" " D-Channel でない(リースされた回線)" #: ../../network/isdn.pm_.c:185 msgid "Which protocol do you want to use?" msgstr "どのプロトコルを使いますか？" #: ../../network/isdn.pm_.c:196 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../network/isdn.pm_.c:203 msgid "What kind of card do you have?" msgstr "どんなカードを使っていますか？" #: ../../network/isdn.pm_.c:204 msgid "I don't know" msgstr "分からない" #: ../../network/isdn.pm_.c:204 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:204 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:210 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "もしISAカードを持っていたら、次の画面の値が適切でしょう。\n" "\n" "もしPCMCIAカードを持っていたら、カードのirqとioを知る必要があります。\n" #: ../../network/isdn.pm_.c:214 msgid "Abort" msgstr "中断" #: ../../network/isdn.pm_.c:214 msgid "Continue" msgstr "続ける" #: ../../network/isdn.pm_.c:220 msgid "Which is your ISDN card?" msgstr "あなたのISDNカードはどれですか？" #: ../../network/isdn.pm_.c:239 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "ISDN カードを検出しましたが、タイプが分かりません。次の画面から PCI カードを" "選んでください。" #: ../../network/isdn.pm_.c:248 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "ISDN PCI カードは見付かりませんでした。次の画面から選んでください" #: ../../network/modem.pm_.c:57 msgid "Please choose which serial port your modem is connected to." msgstr "モデムはどのシリアルポートにつながっていますか？" #: ../../network/modem.pm_.c:67 msgid "Dialup options" msgstr "ダイアルアップオプション" #: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619 msgid "Connection name" msgstr "接続名" #: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620 msgid "Phone number" msgstr "電話番号" #: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621 msgid "Login ID" msgstr "ログイン ID" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Script-based" msgstr "スクリプトを使う認証" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Terminal-based" msgstr "ターミナルからの認証" #: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624 msgid "Domain name" msgstr "ドメイン名" #: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625 msgid "First DNS Server (optional)" msgstr "DNS サーバ（オプション）" #: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626 msgid "Second DNS Server (optional)" msgstr "セカンド DNS サーバ（オプション）" #: ../../network/modem.pm_.c:95 msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm_.c:97 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Do nothing" msgstr "以下には一致しない" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Install rpm" msgstr "インストール" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Title" msgstr "テーブル" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "接続を切るか、あるいは再設定してください。" #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "インターネット接続を再設定できます。" #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "インターネットに接続されています。" #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "インターネットへ接続するか接続を再設定してください" #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "現在はインターネットに接続していません。" #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "接続" #: ../../network/netconnect.pm_.c:37 msgid "Disconnect" msgstr "切断" #: ../../network/netconnect.pm_.c:38 msgid "Configure the connection" msgstr "接続の設定" #: ../../network/netconnect.pm_.c:41 msgid "Internet connection & configuration" msgstr "インターネット接続と設定" #: ../../network/netconnect.pm_.c:94 #, c-format msgid "We are now going to configure the %s connection." msgstr "では %s 接続を設定しましょう。" #: ../../network/netconnect.pm_.c:103 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "では %s 接続を設定しましょう。\n" "\n" "\n" "「OK」を押して始めましょう。" #: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272 #: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77 msgid "Network Configuration" msgstr "ネットワークの設定" #: ../../network/netconnect.pm_.c:133 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "ネットワークインストールをしているので、ネットワークは設定済みです。\n" "いまの設定をそのまま使うには OK をクリックしてください。ネットワーク/インター" "ネットを再設定するにはキャンセルを押します。\n" #: ../../network/netconnect.pm_.c:157 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "ネットワーク設定ウィザードへようこそ\n" "\n" "ここはインターネット/ネットワーク接続を設定するところです。\n" "自動検出を使いたくなければ、チェックをはずしてください。\n" #: ../../network/netconnect.pm_.c:163 msgid "Choose the profile to configure" msgstr "設定するプロフィールの選択" #: ../../network/netconnect.pm_.c:164 msgid "Use auto detection" msgstr "自動検出を使う" #: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966 #: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274 #: ../../standalone/drakfloppy_.c:118 msgid "Expert Mode" msgstr "エキスパートモード" #: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364 msgid "Detecting devices..." msgstr "デバイスの検出中です……" #: ../../network/netconnect.pm_.c:214 msgid "Normal modem connection" msgstr "ふつうのモデム接続を設定" #: ../../network/netconnect.pm_.c:214 #, c-format msgid "detected on port %s" msgstr "ポート %s で検出しました" #: ../../network/netconnect.pm_.c:215 #, fuzzy msgid "Winmodem connection" msgstr "ふつうのモデム接続を設定" #: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217 #, fuzzy msgid "detected" msgstr "%s を検出" #: ../../network/netconnect.pm_.c:216 msgid "ISDN connection" msgstr "ISDN 接続" #: ../../network/netconnect.pm_.c:216 #, c-format msgid "detected %s" msgstr "%s を検出" #: ../../network/netconnect.pm_.c:217 msgid "ADSL connection" msgstr "ADSL 接続" #: ../../network/netconnect.pm_.c:218 msgid "Cable connection" msgstr "ケーブル接続" #: ../../network/netconnect.pm_.c:218 msgid "cable connection detected" msgstr "ケーブル接続が検出されました" #: ../../network/netconnect.pm_.c:219 msgid "LAN connection" msgstr "LAN 接続" #: ../../network/netconnect.pm_.c:219 msgid "ethernet card(s) detected" msgstr "イーサネットカードが検出されました" #: ../../network/netconnect.pm_.c:222 msgid "Choose the connection you want to configure" msgstr "設定したい接続を選んで下さい" #: ../../network/netconnect.pm_.c:246 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "インターネット接続方法を複数設定しましたね。\n" "どれを使うか選んでください。\n" "\n" #: ../../network/netconnect.pm_.c:247 msgid "Internet connection" msgstr "インターネット接続" #: ../../network/netconnect.pm_.c:253 msgid "Do you want to start the connection at boot?" msgstr "ブート時に接続を開始しますか？" #: ../../network/netconnect.pm_.c:267 msgid "Network configuration" msgstr "ネットワーク設定" #: ../../network/netconnect.pm_.c:268 msgid "The network needs to be restarted" msgstr "ネットワークを再起動してください" #: ../../network/netconnect.pm_.c:272 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "ネットワークを再起動時にエラー発生: \n" "\n" "%s" #: ../../network/netconnect.pm_.c:282 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "おめでとうございます。ネットワークとインターネット接続が完了です。\n" "\n" "設定をこれからシステムに反映させます。\n" #: ../../network/netconnect.pm_.c:286 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "これが終わったら、X ウィンドウ環境を再起動させて、ホスト名変更に伴う\n" "問題を回避してください。" #: ../../network/netconnect.pm_.c:287 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "設定中に問題が起きました。\n" "net_monitor か mccで接続をチェックしてください。接続ができていなければ設定を" "再起動したほうがいいかもしれません" #: ../../network/network.pm_.c:278 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "警告！: このデバイスは、すでにインターネット接続用に設定されています。\n" "もとの設定を残したければ、このまま OK を押してください。\n" "以下のフィールドを変更すると、設定が変わってしまいます。" #: ../../network/network.pm_.c:283 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "このマシンの IP アドレスを入力して下さい。\n" "各々の項目にはドットで区切られた十進数(例，1.2.3.4)がIP アドレスとして入力さ" "れます。" #: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294 #, c-format msgid "Configuring network device %s" msgstr "ネットワークデバイス %s の設定" #: ../../network/network.pm_.c:294 #, c-format msgid " (driver %s)" msgstr " (ドライバ %s)" #: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228 #: ../../standalone/drakconnect_.c:464 msgid "IP address" msgstr "IP アドレス:" #: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465 #: ../../standalone/drakgw_.c:291 msgid "Netmask" msgstr "ネットマスク:" #: ../../network/network.pm_.c:298 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network/network.pm_.c:298 msgid "Automatic IP" msgstr "IP の自動設定" #: ../../network/network.pm_.c:299 msgid "Start at boot" msgstr "起動時に開始" #: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812 msgid "IP address should be in format 1.2.3.4" msgstr "IP アドレスは 1.2.3.4 のように入力して下さい" #: ../../network/network.pm_.c:326 msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0'." msgstr "" #: ../../network/network.pm_.c:330 msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0'." msgstr "" #: ../../network/network.pm_.c:350 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "ホスト名を入力して下さい。\n" "ホスト名は“mybox.mylab.myco.com”のようにして下さい。\n" "もしゲートウェイがあれば，その IP アドレスも入力して下さい。" #: ../../network/network.pm_.c:355 msgid "DNS server" msgstr "DNS サーバ" #: ../../network/network.pm_.c:356 #, c-format msgid "Gateway (e.g. %s)" msgstr "ゲートウェイ (例 %s)" #: ../../network/network.pm_.c:358 msgid "Gateway device" msgstr "ゲートウェイデバイス" #: ../../network/network.pm_.c:363 #, fuzzy msgid "DNS server address should be in format 1.2.3.4" msgstr "IP アドレスは 1.2.3.4 のように入力して下さい" #: ../../network/network.pm_.c:367 #, fuzzy msgid "Gateway address should be in format 1.2.3.4" msgstr "IP アドレスは 1.2.3.4 のように入力して下さい" #: ../../network/network.pm_.c:381 msgid "Proxies configuration" msgstr "プロキシの設定" #: ../../network/network.pm_.c:382 msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../network/network.pm_.c:383 msgid "FTP proxy" msgstr "FTP proxy" #: ../../network/network.pm_.c:384 msgid "Track network card id (useful for laptops)" msgstr "ネットワークカードのidを追跡（ラップトップで便利）" #: ../../network/network.pm_.c:387 msgid "Proxy should be http://..." msgstr "Proxy は http://... です" #: ../../network/network.pm_.c:388 msgid "Url should begin with 'ftp:' or 'http:'" msgstr "Url は ftp:かhttp: ではじまります" #: ../../network/shorewall.pm_.c:26 msgid "Firewalling configuration detected!" msgstr "ファイアウォールの設定を検出！" #: ../../network/shorewall.pm_.c:27 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "警告！既存ファイヤウォールの設定を検出。\n" "インストール後に、手動で修正が要るか鞨しれません。" #: ../../network/tools.pm_.c:57 msgid "Internet configuration" msgstr "インターネットの設定" #: ../../network/tools.pm_.c:58 msgid "Do you want to try to connect to the Internet now?" msgstr "今インターネットに接続しますか？" #: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193 msgid "Testing your connection..." msgstr "接続をテストしています..." #: ../../network/tools.pm_.c:70 msgid "The system is now connected to Internet." msgstr "システムはインターネットに接続しました。" #: ../../network/tools.pm_.c:71 msgid "For security reason, it will be disconnected now." msgstr "セキュリティ上の理由で、接続を切ります。" #: ../../network/tools.pm_.c:72 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "このマシンはインターネットへつながっていないようですね。\n" "接続の設定をやりなおしてみてください。" #: ../../network/tools.pm_.c:96 msgid "Connection Configuration" msgstr "接続の設定" #: ../../network/tools.pm_.c:97 msgid "Please fill or check the field below" msgstr "下のフィールドを埋めるかチェックしてください" #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605 msgid "Card IRQ" msgstr "カード IRQ" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606 msgid "Card mem (DMA)" msgstr "カード mem (DMA)" #: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607 msgid "Card IO" msgstr "カード IO" #: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608 msgid "Card IO_0" msgstr "カード IO_0" #: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609 msgid "Card IO_1" msgstr "カード IO_1" #: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610 msgid "Your personal phone number" msgstr "あなたの電話番号" #: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611 msgid "Provider name (ex provider.net)" msgstr "プロバイダの名前 (例 provider.net)" #: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612 msgid "Provider phone number" msgstr "プロバイダの電話番号" #: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613 msgid "Provider dns 1 (optional)" msgstr "プロバイダの dns 1 (オプション)" #: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614 msgid "Provider dns 2 (optional)" msgstr "プロバイダの dns 2 (オプション)" #: ../../network/tools.pm_.c:109 msgid "Choose your country" msgstr "国の選択" #: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617 msgid "Dialing mode" msgstr "ダイアルモード" #: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629 msgid "Connection speed" msgstr "接続の速度: " #: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630 msgid "Connection timeout (in sec)" msgstr "接続のタイムアウト（秒）" #: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615 msgid "Account Login (user name)" msgstr "アカウントログイン（ユーザ名）" #: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616 #: ../../standalone/drakconnect_.c:647 msgid "Account Password" msgstr "アカウントパスワード" #: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132 msgid "United Kingdom" msgstr "イギリス" #: ../../partition_table.pm_.c:603 msgid "mount failed: " msgstr "マウントに失敗: " #: ../../partition_table.pm_.c:667 msgid "Extended partition not supported on this platform" msgstr "このマシンでは、拡張パーティションはサポートされていません" #: ../../partition_table.pm_.c:685 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "パーティションテーブルに未指定の穴がありますが、使えません。\n" "どうしても使いたければ、プライマリパーティションを移動して、未指定の穴を\n" "拡張パーティションの隣にもってきましょう。" #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "%s ファイルからの復元が失敗しました： %s" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "バックアップファイルが壊れています" #: ../../partition_table.pm_.c:796 #, c-format msgid "Error writing to file %s" msgstr "ファイル %s への書き込みエラー" #: ../../partition_table/raw.pm_.c:192 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "ドライブがどうもまずいことになっているようです。\n" "データの整合性チェックが通りません。\n" "つまりディスクへ書き込みをしてもデータがめちゃくちゃになります。" #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "必須" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "重要" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "あると最高" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "あるとうれしい" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "あってもいい" #: ../../printer/data.pm_.c:18 msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue（キューなしで印刷）" #: ../../printer/data.pm_.c:19 msgid "PDQ" msgstr "PDQ" #: ../../printer/data.pm_.c:30 msgid "LPD - Line Printer Daemon" msgstr "LPD - ラインプリンタデーモン" #: ../../printer/data.pm_.c:31 msgid "LPD" msgstr "LPD" #: ../../printer/data.pm_.c:51 msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation（新世代）" #: ../../printer/data.pm_.c:52 msgid "LPRng" msgstr "LPRng" #: ../../printer/data.pm_.c:75 msgid "CUPS - Common Unix Printing System" msgstr "CUPS - 共通 Unix 印刷システム" #: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677 msgid "CUPS" msgstr "CUPS" #: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213 #: ../../printer/detect.pm_.c:250 msgid "Unknown Model" msgstr "未知のモデル" #: ../../printer/main.pm_.c:26 msgid "Local printer" msgstr "ローカルプリンタ" #: ../../printer/main.pm_.c:27 msgid "Remote printer" msgstr "リモートプリンタ" #: ../../printer/main.pm_.c:28 msgid "Printer on remote CUPS server" msgstr "リモートCUPS サーバ上のプリンタ" #: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835 msgid "Printer on remote lpd server" msgstr "リモート lpdサーバ上のプリンタ" #: ../../printer/main.pm_.c:30 msgid "Network printer (TCP/Socket)" msgstr "ネットワークプリンタ（TCP/ソケット）" #: ../../printer/main.pm_.c:31 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/ウィンドウズ 95/98/NTサーバ上のプリンタ" #: ../../printer/main.pm_.c:32 msgid "Printer on NetWare server" msgstr "NetWare サーバ上のプリンタ" #: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839 msgid "Enter a printer device URI" msgstr "プリンタデバイスのURIを入力" #: ../../printer/main.pm_.c:34 msgid "Pipe job into a command" msgstr "ジョブをコマンドへパイプ" #: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478 #: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228 msgid "Unknown model" msgstr "未知のモデル" #: ../../printer/main.pm_.c:317 msgid "Local Printers" msgstr "ローカルプリンタ" #: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678 msgid "Remote Printers" msgstr "リモートプリンタ" #: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381 #, c-format msgid " on parallel port \\/*%s" msgstr " 以下のパラレルポート上 \\/*%s" #: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB プリンタ \\/*%s" #: ../../printer/main.pm_.c:334 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", パラレルポート上の多機能デバイス \\/*%s" #: ../../printer/main.pm_.c:337 msgid ", multi-function device on USB" msgstr "USB 上の多機能デバイス" #: ../../printer/main.pm_.c:339 msgid ", multi-function device on HP JetDirect" msgstr ", HP JetDirect上の多機能デバイス" #: ../../printer/main.pm_.c:341 msgid ", multi-function device" msgstr ", 多機能デバイス" #: ../../printer/main.pm_.c:344 #, c-format msgid ", printing to %s" msgstr "%s へ印刷出力中" #: ../../printer/main.pm_.c:346 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "LPD サーバ 「%s」上の, プリンタ「%s」" #: ../../printer/main.pm_.c:348 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP ホスト「%s」, ポート %s" # y, c-format #: ../../printer/main.pm_.c:352 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "ウィンドウズサーバ 「%s」上の, 共有「%s」" #: ../../printer/main.pm_.c:356 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "Novell サーバ 「%s」上の, プリンタ「%s」" #: ../../printer/main.pm_.c:358 #, c-format msgid ", using command %s" msgstr ", コマンド「%s」を使用" #: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603 msgid "Raw printer (No driver)" msgstr "生のプリンタ（ドライバなし）" #: ../../printer/main.pm_.c:647 #, c-format msgid "(on %s)" msgstr "(%s上で)" #: ../../printer/main.pm_.c:649 msgid "(on this machine)" msgstr "（このマシン上で）" #: ../../printer/main.pm_.c:674 #, c-format msgid "On CUPS server \"%s\"" msgstr "CUPS サーバ「%s」上で" #: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888 #: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120 #: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197 #: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354 msgid " (Default)" msgstr " (デフォルト)" #: ../../printer/printerdrake.pm_.c:27 msgid "Select Printer Connection" msgstr "プリンタの接続を選んでください" #: ../../printer/printerdrake.pm_.c:28 msgid "How is the printer connected?" msgstr "プリンタはどうつながっていますか？" #: ../../printer/printerdrake.pm_.c:30 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "\n" "リモート CUPS サーバ上のプリンタは、ここでは設定不要です。\n" "プリンタは自動検出されます。" #: ../../printer/printerdrake.pm_.c:38 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "プリンタ自動検出 (ローカル、TCP/Socket, SMBプリンタ)" #: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950 msgid "CUPS configuration" msgstr "CUPS 設定" #: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951 msgid "Specify CUPS server" msgstr "CUPS サーバを指定" #: ../../printer/printerdrake.pm_.c:83 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" "ローカルネットワーク上の CUPS サーバ上のプリンタにアクセスするなら、何も\n" "設定する必要はありません。CUPS サーバが自動的にプリンタの情報を流してくれま" "す。\n" "マシンが認識しているプリンタはすべて、Printerdrake の主ウィンドウの「リモー" "ト\n" "プリンタ」に挙がっています。ローカルネットワーク上に CUPS サーバがなけれ" "ば、\n" "CUPS サーバの IP アドレスと、場合によってはポート番号を手動で入力して、サー" "バ\n" "からプリンタ情報をもらうか、あるいはここを空白にしておきます。" #: ../../printer/printerdrake.pm_.c:84 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" "\n" "通常は、CUPS は自動的にネットワーク環境にあわせて設定されて、\n" "ローカルネットワークの CUPS サーバ上のプリンタにアクセスできる\n" "ようになります。でも正しく機能しないなら、「自動CUPS設定」を\n" "オフにして、/etc/cups/cupsd.conf を手で書き換えてやります。\n" "終わったら、CUPS を再起動するのをお忘れなく！\n" "（コマンド: 「service cups restart」)." #: ../../printer/printerdrake.pm_.c:88 msgid "The IP address should look like 192.168.1.20" msgstr "IP アドレスは 192.168.1.20 のように入力して下さい" #: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041 msgid "The port number should be an integer!" msgstr "ポート番号は正数です！" #: ../../printer/printerdrake.pm_.c:99 msgid "CUPS server IP" msgstr "CUPS サーバのIP" #: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061 #: ../../standalone/harddrake2_.c:63 msgid "Port" msgstr "ポート" #: ../../printer/printerdrake.pm_.c:102 msgid "Automatic CUPS configuration" msgstr "自動 CUPS 設定" #: ../../printer/printerdrake.pm_.c:159 msgid "Checking your system..." msgstr "システム調査中..." #: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226 #: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481 #: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133 #: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343 #: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436 #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630 #: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701 #: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731 #: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809 #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911 #: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281 #: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369 #: ../../standalone/printerdrake_.c:47 msgid "Printerdrake" msgstr "Printerdrake" #: ../../printer/printerdrake.pm_.c:167 msgid "" "There are no printers found which are directly connected to your machine" msgstr "マシンに直結したプリンタが見つかりません" #: ../../printer/printerdrake.pm_.c:179 msgid "" "The following printers\n" "\n" msgstr "" "以下のプリンタ\n" "\n" #: ../../printer/printerdrake.pm_.c:180 msgid "" "The following printer\n" "\n" msgstr "" "以下のプリンタ\n" "\n" #: ../../printer/printerdrake.pm_.c:182 msgid "" "\n" "and one unknown printer are " msgstr "" "\n" "と1台の未知のプリンタが" #: ../../printer/printerdrake.pm_.c:184 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" "\n" "と %d 台の未知のプリンタが" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "are " msgstr "" "\n" "が" #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "is " msgstr "" "\n" "が" #: ../../printer/printerdrake.pm_.c:189 msgid "directly connected to your system" msgstr "マシンに直結しています" #: ../../printer/printerdrake.pm_.c:192 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "未知のプリンタが一台マシンに直結しています" #: ../../printer/printerdrake.pm_.c:194 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "%d 台の未知のプリンタがマシンに直結しています" #: ../../printer/printerdrake.pm_.c:200 msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "(すべてのプリンタを接続して電源を入れてください)。\n" #: ../../printer/printerdrake.pm_.c:214 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "上記のプリンタやローカルネットワーク上のプリンタでの印刷を可能にしますか？\n" #: ../../printer/printerdrake.pm_.c:215 msgid "Do you want to enable printing on printers in the local network?\n" msgstr "ローカルネットワークのプリンタで印刷を可能にしますか？\n" #: ../../printer/printerdrake.pm_.c:217 msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "上記のプリンタで印刷を可能にしますか？\n" #: ../../printer/printerdrake.pm_.c:218 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "このマシンで本当に印刷の設定をしますか？\n" #: ../../printer/printerdrake.pm_.c:219 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "注：プリンタの機種と印刷方式によっては、最大で %d MB の追加ソフトがインストー" "ルされます。" #: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270 #: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933 #: ../../printer/printerdrake.pm_.c:3060 msgid "Add a new printer" msgstr "プリンタ追加" #: ../../printer/printerdrake.pm_.c:259 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "プリンタ設定ウィザードへいらっしゃ〜い\n" "\n" "このウィザードでは、このマシンやネットワーク上の他のマシンで使う\n" "ローカルプリンタやリモートプリンタをインストールします。\n" "\n" "プリンタ設定に必要な各種情報を訪ねて、各種プリンタドライバや\n" "そのオプション、プリンタ接続方式を選べるようにします。" #: ../../printer/printerdrake.pm_.c:272 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "プリンタ設定ウィザードへいらっしゃ〜い\n" "\n" "このウィザードでは、このマシンやネットワークに直結したプリンタや、リモートの" "ウィンドウズマシンにつながったプリンタをインストールします。\n" "\n" "マシンにプリンタが接続されているなら、ケーブルをつないで電源を入れてくださ" "い。自動検出されます。またネットワークプリンタやウィンドウズマシンも同じく接" "続して電源を入れてください。\n" "\n" "なお、ネットワーク上のプリンタの自動検出は、マシンに直結したプリンタの自動検" "出よりは時間がかかります。だから必要なければ、ネットワークプリンタやウィンド" "ウズ上のプリンタ自動検出はオフにしておきましょう。\n" "\n" "準備ができたら「次」をクリックしてください。プリンタ設定をしないなら「キャン" "セル」をクリックしましょう。" #: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "プリンタ設定ウィザードへいらっしゃ〜い\n" "\n" "このウィザードでは、このマシンやネットワークに直結したプリンタや、リモートの" "ウィンドウズマシンにつながったプリンタをインストールします。\n" "\n" "マシンにプリンタが接続されているなら、ケーブルをつないで電源を入れてくださ" "い。自動検出されます。\n" "\n" "準備ができたら「次」をクリックしてください。プリンタ設定をしないなら「キャン" "セル」をクリックしましょう。" #: ../../printer/printerdrake.pm_.c:289 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "プリンタ設定ウィザードへいらっしゃ〜い\n" "\n" "このウィザードでは、このマシンやネットワークに直結したプリンタをインストール" "します。\n" "\n" "マシンにプリンタが接続されているなら、ケーブルをつないで電源を入れてくださ" "い。自動検出されます。またネットワークプリンタも同じく接続して電源を入れてく" "ださい。\n" "\n" "なお、ネットワーク上のプリンタの自動検出は、マシンに直結したプリンタの自動検" "出よりは時間がかかります。だから必要なければ、ネットワークプリンタ自動検出は" "オフにしておきましょう。\n" "\n" "準備ができたら「次」をクリックしてください。プリンタ設定をしないなら「キャン" "セル」をクリックしましょう。" #: ../../printer/printerdrake.pm_.c:307 msgid "Auto-detect printers connected to this machine" msgstr "マシン直結プリンタ自動検出" #: ../../printer/printerdrake.pm_.c:310 msgid "Auto-detect printers connected directly to the local network" msgstr "ローカルネットワーク接続のプリンタ検出" #: ../../printer/printerdrake.pm_.c:313 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "マイクロソフトウィンドウズ上のプリンタ自動検出" #: ../../printer/printerdrake.pm_.c:329 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "おめでとうございます。プリンタのインストールと設定が完了しました！\n" "\n" "アプリケーションの「印刷」コマンド（ふつうは「ファイル」メニューの）\n" "から印刷できます。\n" "\n" "プリンタの追加、削除、名称変更、デフォルト設定（用紙トレイ、印字品質など）" "が\n" "したければ、Mandrake コントロールセンターの「ハードウェア」の中の\n" "「プリンタ」を選んでください。" #: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538 #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Printer auto-detection" msgstr "プリンタ自動検出をする" #: ../../printer/printerdrake.pm_.c:385 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", ネットワークプリンタ「%s」, ポート %s" #: ../../printer/printerdrake.pm_.c:387 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", プリンタ「%s」、SMB/ウィンドウズ 95/98/NTサーバ「%s」上" #: ../../printer/printerdrake.pm_.c:391 #, c-format msgid "Detected %s" msgstr "%s を検出" #: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423 #: ../../printer/printerdrake.pm_.c:440 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "パラレルポート上のプリンタ \\/*%s" #: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425 #: ../../printer/printerdrake.pm_.c:443 #, c-format msgid "USB printer \\/*%s" msgstr "USB プリンタ \\/*%s" #: ../../printer/printerdrake.pm_.c:399 #, c-format msgid "Network printer \"%s\", port %s" msgstr "ネットワークプリンタ %s, ポート %s" #: ../../printer/printerdrake.pm_.c:401 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "プリンタ %s, SMB/ウィンドウズ 95/98/NTサーバ%s上" #: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547 msgid "Local Printer" msgstr "ローカルプリンタ" #: ../../printer/printerdrake.pm_.c:526 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "ローカルプリンタが見つかりません。手動でインストールするには、デバイス名か\n" "ファイル名を入力ラインに入れます (パラレルポートなら: /dev/lp0, /dev/lp1,... " "が LPT1:, LPT2:, ..., に対応して、1番目の USB プリンタ: /dev/usb/lp0, 2番目" "の USB プリンタ: /dev/usb/lp1, ...)." #: ../../printer/printerdrake.pm_.c:530 msgid "You must enter a device or file name!" msgstr "デバイスかファイル名を入力してください" #: ../../printer/printerdrake.pm_.c:539 msgid "No printer found!" msgstr "プリンタが見つかりません！" #: ../../printer/printerdrake.pm_.c:548 msgid "Available printers" msgstr "使えるプリンタ" #: ../../printer/printerdrake.pm_.c:552 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" "以下のプリンタが自動検出されました。もしこれが設定したいものでなければ、\n" "入力行に、デバイス名/ファイル名を入力してください" #: ../../printer/printerdrake.pm_.c:553 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" "以下のプリンタが自動検出されました。もし設定したいものがここになければ、\n" "入力行に、デバイス名/ファイル名を入力してください" #: ../../printer/printerdrake.pm_.c:555 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" "以下のプリンタが自動検出されました。プリンタは完全に自動で設定されます。\n" "検出されていなかったり、カスタム設定をしたければ「手動設定」を有効にしてくだ" "さい。" #: ../../printer/printerdrake.pm_.c:556 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" "以下のプリンタが自動検出されました。設定したいプリンタを選んでください。\n" "プリンタは完全に自動で設定されます。検出されていなかったり、カスタム設定\n" "したければ「手動設定」を有効にしてください。" #: ../../printer/printerdrake.pm_.c:558 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "プリンタが接続されているポートを選ぶか、入力行にデバイス名/ファイル名を\n" "入力してください" #: ../../printer/printerdrake.pm_.c:559 msgid "Please choose the port where your printer is connected to." msgstr "モデムはどのシリアルポートにつながっていますか？" #: ../../printer/printerdrake.pm_.c:561 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" "(パラレルポートなら: /dev/lp0, /dev/lp1,... が LPT1:, LPT2:, ..., に対応、1番" "目の USB プリンタ: /dev/usb/lp0, 2番目の USB プリンタ: /dev/usb/lp1, ...)." #: ../../printer/printerdrake.pm_.c:565 msgid "You must choose/enter a printer/device!" msgstr "プリンタかデバイスを入力・選択" #: ../../printer/printerdrake.pm_.c:584 msgid "Manual configuration" msgstr "マニュアル設定" #: ../../printer/printerdrake.pm_.c:633 msgid "Remote lpd Printer Options" msgstr "リモートlpdプリンタオプション" #: ../../printer/printerdrake.pm_.c:634 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "リモートの lpd の プリンタを使うには，プリンタサーバの\n" "ホスト名とサーバ上のプリンタ名が必要になります。." #: ../../printer/printerdrake.pm_.c:635 msgid "Remote host name" msgstr "リモートホスト名" #: ../../printer/printerdrake.pm_.c:636 msgid "Remote printer name" msgstr "リモートプリンタ名" #: ../../printer/printerdrake.pm_.c:639 msgid "Remote host name missing!" msgstr "リモートホスト名がありません！" #: ../../printer/printerdrake.pm_.c:643 msgid "Remote printer name missing!" msgstr "リモートプリンタ名がありません！" #: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170 #, c-format msgid "Detected model: %s %s" msgstr "検出されたモデル: %s %s" #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Scanning network..." msgstr "ネットワーク走査中..." #: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", プリンタ%s, サーバ「%s」上" #: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "プリンタ%s, サーバ「%s」上" #: ../../printer/printerdrake.pm_.c:795 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (ウィンドウズ 9x/NT) プリンタのオプション" #: ../../printer/printerdrake.pm_.c:796 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "SMB プリンタを使うには，SMB ホスト名(注！TCP/IP ホスト名とは別！)と，\n" "多分プリントサーバの IP アドレス，アクセスしたいプリンタの共有名，\n" "適切なユーザ名，パスワードおよびワークグループの情報が必要になります。" #: ../../printer/printerdrake.pm_.c:797 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" "希望のプリンタが自動検出されたら、それを一覧から選んで、必要に応じてユーザ" "名、パスワード、ワークグループなどを入力してください。" #: ../../printer/printerdrake.pm_.c:799 msgid "SMB server host" msgstr "SMBサーバホスト" #: ../../printer/printerdrake.pm_.c:800 msgid "SMB server IP" msgstr "SMBサーバのIP" #: ../../printer/printerdrake.pm_.c:801 msgid "Share name" msgstr "シェア名" #: ../../printer/printerdrake.pm_.c:804 msgid "Workgroup" msgstr "ワークグループ" #: ../../printer/printerdrake.pm_.c:806 msgid "Auto-detected" msgstr "自動検出されたもの" #: ../../printer/printerdrake.pm_.c:816 msgid "Either the server name or the server's IP must be given!" msgstr "サーバ名か、サーバのIPはどうしても要ります！" #: ../../printer/printerdrake.pm_.c:820 msgid "Samba share name missing!" msgstr "Sambaシェア名がありません！" #: ../../printer/printerdrake.pm_.c:826 msgid "SECURITY WARNING!" msgstr "!!!セキュリティ警告!!!" #: ../../printer/printerdrake.pm_.c:827 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "これからパスワードつきのウィンドウズのアカウント上での印刷設定を行います。" "Sambaクライアントソフトウェアのアーキテクチャ上の欠陥のため、パスワードは印刷" "ジョブをウィンドウズサーバに送る時に使われるSambaクライアントのコマンドライン" "に平文のままで入ります。だからこのマシン上の全ユーザは、「ps auxwww」コマンド" "を実行すると、パスワードを表示できてしまいます。\n" "\n" "できれば以下の代替方式をおすすめします（いずれの場合にも、たとえばファイアー" "ウォールなどを使ってウィンドウズサーバにアクセスできるのがローカルネットワー" "ク上のマシンだけであることを確認しましょう):\n" "\n" "ウィンドウズサーバ上で「GUEST」などパスワードのないアカウントや、印刷専用のア" "カウントを使うこと。個人のアカウントや管理者アカウントからパスワード保護を取" "り除いてはいけません。\n" "\n" "ウィンドウズサーバの設定で、プリンタがLPDプロトコルで提供されるようにする。そ" "してこｎマシンからの印刷設定をPrinterdrakeの \"%s\" 接続タイプで行う。\n" "\n" #: ../../printer/printerdrake.pm_.c:837 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "ウィンドウズサーバを設定してプリンタがIPPプロトコルで提供されるようにする。そ" "してこｎマシンからの印刷設定をPrinterdrakeの \"%s\" 接続タイプで行う。\n" "\n" #: ../../printer/printerdrake.pm_.c:840 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "プリンタをLinuxサーバに接続して、ウィンドウズマシンをそのクライアントとして接" "続するようにする。\n" "\n" "いまの状態でプリンタの設定を続けますか?" #: ../../printer/printerdrake.pm_.c:911 msgid "NetWare Printer Options" msgstr "Netware プリンタのオプション" #: ../../printer/printerdrake.pm_.c:912 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Netware プリンタを使うには，NetWare ホスト名(注！TCP/IP ホスト名とは違う！)\n" "と，アクセスしたいプリンタのプリントキュー名，適切なユーザ名および\n" "パスワードが必要になります。" #: ../../printer/printerdrake.pm_.c:913 msgid "Printer Server" msgstr "プリンタサーバ" #: ../../printer/printerdrake.pm_.c:914 msgid "Print Queue Name" msgstr "印刷キューの名前" #: ../../printer/printerdrake.pm_.c:919 msgid "NCP server name missing!" msgstr "NCP サーバ名がありません！" #: ../../printer/printerdrake.pm_.c:923 msgid "NCP queue name missing!" msgstr "NCP キュー名がありません！" #: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007 #, c-format msgid ", host \"%s\", port %s" msgstr ", ホスト「%s」, ポート %s" #: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010 #, c-format msgid "Host \"%s\", port %s" msgstr "ホスト「%s」, ポート %s" #: ../../printer/printerdrake.pm_.c:1030 msgid "TCP/Socket Printer Options" msgstr "TCP/ソケットプリンタのオプション" #: ../../printer/printerdrake.pm_.c:1032 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" "一覧から自動検出プリンタをどれか選ぶか、入力フィールドにホスト名かIP とオプ" "ションでポート番号（デフォルトは9100）を入力する。" #: ../../printer/printerdrake.pm_.c:1033 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "TCPまたはソケットプリンタで印刷するなら、プリンタのホスト名か、IP番号と時には" "ポート番号 (デフォルトは9100) が必要になります。HP JetDirect サーバでは、ポー" "ト番号は\n" "通常9100ですが、ほかのサーバだとまちまちです。ハードウェアのマニュアルを見ま" "しょう。" #: ../../printer/printerdrake.pm_.c:1037 msgid "Printer host name or IP missing!" msgstr "プリンタホスト名かIPがありません！" #: ../../printer/printerdrake.pm_.c:1059 msgid "Printer host name or IP" msgstr "プリンタホスト名かIP" #: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109 msgid "Printer Device URI" msgstr "プリンタデバイスのURI" #: ../../printer/printerdrake.pm_.c:1108 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "プリンタをアクセスするのに直接 URI を指定することもできます。\n" "このURIはCUPS仕様かFoomatic仕様で指定してください。\n" "なお、すべてのURIタイプが全スプーラでサポートされているわけじゃないです。" #: ../../printer/printerdrake.pm_.c:1123 msgid "A valid URI must be entered!" msgstr "有効なURIを入力してください！" #: ../../printer/printerdrake.pm_.c:1463 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "プリンタはそれぞれ名前が必要です（たとえば「printer」。\n" "説明や場所の欄は空欄でもかまいません。\n" "これはユーザにわかりやすくするためのものです。" #: ../../printer/printerdrake.pm_.c:1464 msgid "Name of printer" msgstr "プリンタの名前" #: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38 msgid "Description" msgstr "説明" #: ../../printer/printerdrake.pm_.c:1466 msgid "Location" msgstr "プリンタの場所" #: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599 msgid "Reading printer database..." msgstr "プリンタデータベースを読んでいます..." #: ../../printer/printerdrake.pm_.c:1482 msgid "Preparing printer database..." msgstr "プリンタデータベースを準備中..." #: ../../printer/printerdrake.pm_.c:1578 msgid "Your printer model" msgstr "プリンタの機種" #: ../../printer/printerdrake.pm_.c:1579 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake は、プリンタの自動検出で得られた機種名と、プリンタの\n" "データベースとを比較して最適なものを選びました。でもこの選択はまちがって\n" "いるかもしれません。特にプリンタがデータベース内にまったくない場合には\n" "よくまちがいが怒ります。Printerdrake の選択が正しいかを確かめて、\n" "正しければ「このモデルを使う」をクリックします。まちがっていたら\n" "「手動で選ぶ」を選んで、次画面から手動でプリンタ機種名を選んでください。\n" "\n" "Printerdrake は以下のプリンタを見つけました:\n" "\n" "%s" #: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587 msgid "The model is correct" msgstr "このモデルを使う" #: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586 #: ../../printer/printerdrake.pm_.c:1589 msgid "Select model manually" msgstr "手動で選ぶ" #: ../../printer/printerdrake.pm_.c:1606 msgid "Printer model selection" msgstr "プリンタの機種を選ぶ" #: ../../printer/printerdrake.pm_.c:1607 msgid "Which printer model do you have?" msgstr "どの機種のプリンタを使っていますか？" #: ../../printer/printerdrake.pm_.c:1608 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" "\n" "\n" "Printerdrake がプリンタの機種を正しく自動検出したか確かめてください。\n" "カーソルがまちがったモデル化「ナマのプリンタ（Raw Printer)」を指して\n" "いたら、一覧から正しい機種を探してください。" #: ../../printer/printerdrake.pm_.c:1611 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "あなたのプリンタがなければ、互換性のあるプリンタ（プリンタのマニュアルか\n" "類似プリンタを選んでください。" #: ../../printer/printerdrake.pm_.c:1697 msgid "OKI winprinter configuration" msgstr "OKI winプリンタの設定" #: ../../printer/printerdrake.pm_.c:1698 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "OKI のレーザwinプリンタを設定しようとしていますね。このプリンタは非常に特殊" "な\n" "プロトコルを使うので、最初のパラレルポートにつながないと機能しません。\n" "もし別のポートに接続されていたり、プリンタサーバにつながっていたりする場合に" "は、\n" "テストページ印刷の前に、最初のパラレルポートにつなぎなおしてください。\n" "さもないと使えません。接続種類の設定は無視されます。" #: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745 msgid "Lexmark inkjet configuration" msgstr "Lexmarkインクジェットの設定" #: ../../printer/printerdrake.pm_.c:1719 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Lexmarkが提供するインクジェットプリンタドライバは、ローカルプリンタしか\n" "サポートしません。リモートマシンやプリンタサーバ上のプリンタは使えません。\n" "プリンタをローカルポートにつなぐか接続されているマシンで設定してください。" #: ../../printer/printerdrake.pm_.c:1746 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Lexmark インクジェットとこの設定で印刷するには、Lexmark(http://www.lexmark." "com/) の提供するインクジェットプリンタドライバが必要です。アメリカサイトに" "行って、「ドライバ」をクリックしましょう。それから自分の機種を選んで、OSの欄" "で\"Linux\" を選びます。ドライバは RPM パッケージか、グラフィックインストール" "用のシェルスクリプトになっています。この設定はグラフィックフロントエンドを使" "わなくてもできます。ライセンス同意のあとですぐにキャンセルしてください。それ" "から印刷ヘッドのアラインメントページを\"lexmarkmaintain\" で印刷して、このプ" "ログラムでヘッドのアラインメントを調整します。" #: ../../printer/printerdrake.pm_.c:1749 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "Zenographics ZJ-Stream形式のGDIレーザプリンタ" #: ../../printer/printerdrake.pm_.c:1750 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" "あなたのプリンタは、Zenographics ZJ-streamラスタ形式でプリンタにデータを送" "る、GDIレーザプリンタの一種です。このプリンタ用のドライバはまだ開発の初期なの" "で、必ずしも正しく機能しないかもしれません。特に、A4以外の用紙では使えないか" "もしれません。\n" "\n" "もともとこのドライバを使うHP LaserJet 1000などでは、プリンタの電源を入れてか" "らファームウェアの転送が必要になります。HP LaserJet1000 の場合にはプリンタの" "ウィンドウズドライバCDを探すか、ウィンドウズパーティションを探して\"sihp1000." "img\" というファイルを探し、以下のコマンドのいずれかでそのファイルをプリンタ" "に送ります:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "最初のコマンドはだれでも実行できます。二番目はrootでないと実行できません。こ" "れが終わったら普通に印刷できます。\n" #: ../../printer/printerdrake.pm_.c:1972 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "プリンタのデフォルト設定\n" "\n" "ページの大きさとインクの種類（該当する場合のみ）が正しく設定されているかを確" "認しましょう。なお、超高品質印刷はすごく時間がかかることがあります。" #: ../../printer/printerdrake.pm_.c:1981 #, c-format msgid "Option %s must be an integer number!" msgstr "オプション %s は整数です！" #: ../../printer/printerdrake.pm_.c:1985 #, c-format msgid "Option %s must be a number!" msgstr "オプション %s は数字です！" #: ../../printer/printerdrake.pm_.c:1989 #, c-format msgid "Option %s out of range!" msgstr "オプション %s 範囲外です!" #: ../../printer/printerdrake.pm_.c:2028 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "このプリンタ (\"%s\") を\n" "デフォルトプリンタにしますか？" #: ../../printer/printerdrake.pm_.c:2051 msgid "Test pages" msgstr "テストページ" #: ../../printer/printerdrake.pm_.c:2052 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "印刷したいテストページを選んでください。\n" "注：写真テストページは、印刷にかなり時間がかかることがありますし、メモリの少" "ないレーザプリンタでは出力できないこともあります。多くの場合は標準ページが印" "刷できれば大丈夫です。" #: ../../printer/printerdrake.pm_.c:2056 msgid "No test pages" msgstr "テストページなし" #: ../../printer/printerdrake.pm_.c:2057 msgid "Print" msgstr "印刷" #: ../../printer/printerdrake.pm_.c:2114 msgid "Standard test page" msgstr "標準テストページ" #: ../../printer/printerdrake.pm_.c:2117 msgid "Alternative test page (Letter)" msgstr "別のテストページ (レター)" #: ../../printer/printerdrake.pm_.c:2120 msgid "Alternative test page (A4)" msgstr "別のテストページ (A4)" #: ../../printer/printerdrake.pm_.c:2122 msgid "Photo test page" msgstr "写真テストページ" #: ../../printer/printerdrake.pm_.c:2126 msgid "Do not print any test page" msgstr "テストページを印刷しない" #: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285 msgid "Printing test page(s)..." msgstr "テストページ印刷中……" #: ../../printer/printerdrake.pm_.c:2159 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "テストページをプリンタデーモンに送りました。\n" "プリンタが動き出すまで、ちょっと時間がかかります。\n" "印刷のステータス：\n" "%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2163 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "テストページをプリンタデーモンに送りました。\n" "プリンタが動き出すまで、ちょっと時間がかかります。\n" #: ../../printer/printerdrake.pm_.c:2170 msgid "Did it work properly?" msgstr "うまく動きましたか？" #: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229 msgid "Raw printer" msgstr "生のプリンタ" #: ../../printer/printerdrake.pm_.c:2216 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "コマンドライン（ターミナルウィンドウ）からファイルを印刷するには、\n" "コマンド「%s 」か、グラフィック印刷ツール: 「xpp 」か\n" "「kprinter 」を使います。グラフィックツールは、\n" "プリンタ選択とオプション設定を簡単にしてくれます。\n" #: ../../printer/printerdrake.pm_.c:2218 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "こうしたコマンドは、多くのアプリケーションの印刷ダイアログの中の\n" "「印刷コマンド」フィールドでも使えますが、その場合はファイル名は要りませ" "ん。\n" "印刷するファイルはアプリケーションからくるからです。\n" #: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238 #: ../../printer/printerdrake.pm_.c:2248 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "「%s」コマンドはまた、印刷ジョブごとにオプション設定を変えさせてくれます。\n" "コマンドラインに希望の設定を追加するだけです。\n" "たとえば「%s 」という具合です。 " #: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" "いまのプリンタで使えるオプション一覧を見るには、下の一覧を読むか、\n" "あるいは「オプション一覧を印刷」ボタンをクリックしましょう。%s%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2228 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "いまのプリンタで使える印刷オプション一覧は以下の通りです:\n" "\n" #: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "コマンドライン（ターミナルウィンドウ）からファイルを印刷するには、\n" "コマンド「%s 」を使います。\n" #: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245 #: ../../printer/printerdrake.pm_.c:2255 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "こうしたコマンドは、多くのアプリケーションの印刷ダイアログの中の\n" "「印刷コマンド」フィールドでも使えますが、その場合はファイル名は要りませ" "ん。\n" "印刷するファイルはアプリケーションからくるからです。\n" #: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "いまのプリンタで使えるオプション一覧を見るには、「オプション一覧を印刷」ボタ" "ンをクリックしましょう。" #: ../../printer/printerdrake.pm_.c:2253 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "コマンドライン（ターミナルウィンドウ）からファイルを印刷するには、\n" "コマンド「%s 」または「%s 」を使います。\n" #: ../../printer/printerdrake.pm_.c:2257 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "またオプション設定や印刷ジョブの処理にはグラフィックの「xpdq」も使えます。\n" "デスクトップ環境が KDE なら、「パニックボタン」というアイコンがデスクトップ" "に\n" "あるでしょう。これをクリックすると、印刷ジョブが全部すぐに止まります。\n" "これはたとえば紙詰まりのときに便利です。\n" #: ../../printer/printerdrake.pm_.c:2261 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "「%s」と「%s」コマンドはまた、印刷ジョブごとにオプション設定を\n" "変えさせてくれます。コマンドラインに希望の設定を追加するだけです。\n" "たとえば「%s 」という具合です。\n" #: ../../printer/printerdrake.pm_.c:2271 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "以下で印刷中/スキャン/フォトカード： \"%s\"" #: ../../printer/printerdrake.pm_.c:2272 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "以下で印刷中/スキャン： \"%s\"" #: ../../printer/printerdrake.pm_.c:2274 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "以下で印刷中/フォトカードアクセス： \"%s\"" #: ../../printer/printerdrake.pm_.c:2275 #, c-format msgid "Printing on the printer \"%s\"" msgstr "以下のプリンタで印刷中： \"%s\"" #: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281 #: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283 #: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307 #: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156 #: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695 #: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118 msgid "Close" msgstr "閉じる" #: ../../printer/printerdrake.pm_.c:2281 msgid "Print option list" msgstr "プリンタオプション一覧" #: ../../printer/printerdrake.pm_.c:2301 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "HP 多機能デバイスを自動設定して、スキャナも使えるようにしました。これでコマン" "ドラインから\"scanimage\"を入力するか (複数のスキャナがある場合は\"scanimage " "-d hp:%s\" でスキャナを指定)、グラフィックインターフェースの\"xscanimage\" " "か \"xsane\"を使ってスキャンができます。GIMPを使っているなら、\"ファイル\"/" "\"読み込み\"メニューで適切な部分を選んでも可能です。詳しくは、コマンドライン" "で \"man scanimage\" と \"man sane-hp\" を参照してください。\n" "\n" "このデバイスでは\"scannerdrake\" は使わないでください!" #: ../../printer/printerdrake.pm_.c:2322 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "プリンタは、PCからフォトカードドライブにアクセスできるように自動設定されまし" "た。これでグラフィックプログラム\"MtoolsFM\" (Menu: \"アプリケーション\" -> " "\"ファイルツール\" -> \"MTools ファイルマネージャ\") か、コマンドラインのユー" "ティリティ \"mtools\" (詳しくはコマンドラインで\"man mtools\" と入力) をｔ" "かってフォトカードにアクセスできます。カードのファイルシステムは、ドライブ文" "字 \"p:\"以降となります。\"MtoolsFM\" ではファイル一覧の右上すみ のフィールド" "でドライブ文字を変えられます。" #: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702 #: ../../printer/printerdrake.pm_.c:2990 msgid "Reading printer data..." msgstr "プリンタの情報を読んでいます..." #: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391 #: ../../printer/printerdrake.pm_.c:2426 msgid "Transfer printer configuration" msgstr "プリンタの設定を移動" #: ../../printer/printerdrake.pm_.c:2365 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "スプーラ %s からいまのスプーラ %s へ、プリンタの設定をコピーできます。設定" "データすべて（プリンタ名、説明、場所、接続種類、デフォルトのオプション設定）" "はそちらに取られますが、ジョブは移動しません。以下の理由で、移動できない" "キューもあります：\n" #: ../../printer/printerdrake.pm_.c:2368 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS は Novell サーバのプリンタや、自由形式のコマンドにデータを送るプリンタは" "サポートしません。\n" #: ../../printer/printerdrake.pm_.c:2370 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "PDQ はローカルプリンタとリモートの LPD プリンタ、ソケット/TCP プリンタしかサ" "ポートしません。\n" #: ../../printer/printerdrake.pm_.c:2372 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD と LPRng はIPP プリンタをサポートしません。\n" #: ../../printer/printerdrake.pm_.c:2374 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "さらにこのプログラムや\"foomatic-configure\" で作っていないキューは移動できま" "せん。" #: ../../printer/printerdrake.pm_.c:2375 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "またメーカー提供の PPD ファイルやネイティブの CUPS ドライバで設定されたプリン" "タは移動できません。" #: ../../printer/printerdrake.pm_.c:2376 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "移動したいプリンタを選んで \"T移動\"をクリックしてください。" #: ../../printer/printerdrake.pm_.c:2379 msgid "Do not transfer printers" msgstr "プリンタを移動しない" #: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396 msgid "Transfer" msgstr "移動" #: ../../printer/printerdrake.pm_.c:2392 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "\"%s\" というプリンタはすでに %s の下に存在します。\n" "上書きするには \"移動\" を押してください。\n" "新しい名前をタイプするか、このプリンタをとばすこともできます。" #: ../../printer/printerdrake.pm_.c:2400 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "プリンタ名は、文字と数字とアンダースコア (_)しか使えません" #: ../../printer/printerdrake.pm_.c:2405 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "プリンタ \"%s\" はすでに存在します。\n" "いまの設定を上書きしてしまいますか？" #: ../../printer/printerdrake.pm_.c:2413 msgid "New printer name" msgstr "新しいプリンタの名前" #: ../../printer/printerdrake.pm_.c:2416 #, c-format msgid "Transferring %s..." msgstr "%s 移動中……" #: ../../printer/printerdrake.pm_.c:2427 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "前のデフォルトプリンタ (\"%s\")を移動しました。新しい印刷システム%sでもこれを" "デフォルトのプリンタにしますか？" #: ../../printer/printerdrake.pm_.c:2437 msgid "Refreshing printer data..." msgstr "プリンタデータ更新中..." #: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516 #: ../../printer/printerdrake.pm_.c:2528 msgid "Configuration of a remote printer" msgstr "リモートプリンタの設定" #: ../../printer/printerdrake.pm_.c:2446 msgid "Starting network..." msgstr "ネットワーク起動中..." #: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483 #: ../../printer/printerdrake.pm_.c:2485 msgid "Configure the network now" msgstr "今すぐネットワーク設定をする" #: ../../printer/printerdrake.pm_.c:2480 msgid "Network functionality not configured" msgstr "ネットワーク機能が設定されてません" #: ../../printer/printerdrake.pm_.c:2481 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "リモートプリンタの設定をします。これはネットワークアクセスの稼働が必須です" "が、あなたのネットワーク設定はすんでいません。ネットワーク設定なしで進むと、" "いま設定中のプリンタは使えません。さてどう進めましょうか？" #: ../../printer/printerdrake.pm_.c:2484 msgid "Go on without configuring the network" msgstr "ネットワークの設定をとばして先に進む" #: ../../printer/printerdrake.pm_.c:2518 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "インストール中にやったネットワーク設定が起動できません。起動時にネットワーク" "が有効になっているか調べて、必要ならMandrakeコントロールセンタの「ネットワー" "ク&インターネット/接続」の部分で設定をなおしてください。それが住んでから、同" "じくMandrakeコントロールセンタの「ハードウェア/プリンタ」の部分でプリンタの設" "定をしましょう。" #: ../../printer/printerdrake.pm_.c:2519 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "ネットワークアクセスが落ちていて、起動できませんでした。ハードウェアや設定を" "チェックしてください。それからリモートプリンタの設定をやりなおしてください。" #: ../../printer/printerdrake.pm_.c:2529 msgid "Restarting printing system..." msgstr "プリンタシステム再起動中..." #: ../../printer/printerdrake.pm_.c:2568 msgid "high" msgstr "高い" #: ../../printer/printerdrake.pm_.c:2568 msgid "paranoid" msgstr "神経質なほど高水準" #: ../../printer/printerdrake.pm_.c:2569 #, c-format msgid "Installing a printing system in the %s security level" msgstr "印刷システムをセキュリティ水準 %s でインストール中" #: ../../printer/printerdrake.pm_.c:2570 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "これから、印刷システム %s をセキュリティ水準 %s のマシンにインストールしま" "す。\n" "\n" "この印刷システムは、デーモン（バックグラウンドのプロセス）を実行します。これ" "は印刷ジョブを待って、それがきたら処理します。このデーモンはネットワーク経由" "で、リモートマシンからもアクセスできるので、攻撃される可能性があります。です" "からこのセキュリティ水準では、デフォルトで起動するデーモンはごく少数です。\n" "\n" "このマシンで印刷の設定を本当にやっていいですね？" #: ../../printer/printerdrake.pm_.c:2604 msgid "Starting the printing system at boot time" msgstr "起動時に印刷システムをスタート" #: ../../printer/printerdrake.pm_.c:2605 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "印刷システム (%s) は、マシン起動時に自動スタートしません。\n" "\n" "セキュリティ水準を上げたために、自動スタートが無効になったのかもしれません。" "印刷システムは、攻撃される可能性があるからです。\n" "\n" "印刷システムの自動スタートをもう一度有効にしますか？" #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765 msgid "Checking installed software..." msgstr "インストール済みソフトをチェック中……" #: ../../printer/printerdrake.pm_.c:2630 #, fuzzy, c-format msgid "Removing %s ..." msgstr "%s 削除中" #: ../../printer/printerdrake.pm_.c:2636 #, fuzzy, c-format msgid "Installing %s ..." msgstr "パッケージのインストール中..." #: ../../printer/printerdrake.pm_.c:2685 msgid "Select Printer Spooler" msgstr "プリンタのスプーラを選んでください" #: ../../printer/printerdrake.pm_.c:2686 msgid "Which printing system (spooler) do you want to use?" msgstr "どの印刷システム（スプーラ）を使いますか？" #: ../../printer/printerdrake.pm_.c:2720 #, c-format msgid "Configuring printer \"%s\"..." msgstr "プリンタ \"%s\" の設定中..." #: ../../printer/printerdrake.pm_.c:2731 msgid "Installing Foomatic..." msgstr "Foomatic のインストール中..." #: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838 #: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300 msgid "Printer options" msgstr "プリンタオプション" #: ../../printer/printerdrake.pm_.c:2810 msgid "Preparing Printerdrake..." msgstr "PrinterDrake準備中..." #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369 msgid "Configuring applications..." msgstr "アプリケーションの設定中..." #: ../../printer/printerdrake.pm_.c:2845 msgid "Would you like to configure printing?" msgstr "印刷の設定をしますか？" #: ../../printer/printerdrake.pm_.c:2857 msgid "Printing system: " msgstr "印刷システム:" #: ../../printer/printerdrake.pm_.c:2915 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" "以下のプリンタが設定されています。設定を変更したいプリンタをダブルクリックし" "てください。デフォルトプリンタにしたり、その情報を見たり、リモートのCUPS サー" "バ上のプリンタを Star Office/OpenOffice.org/GIMPで使えるようにする場合もそう" "です。" #: ../../printer/printerdrake.pm_.c:2916 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "以下のプリンタが設定されています。変更、デフォルト化、情報の参照には、\n" "そのプリンタをダブルクリックします。" #: ../../printer/printerdrake.pm_.c:2942 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "プリンタ一覧更新（リモート CUPSプリンタをすべて表示)" #: ../../printer/printerdrake.pm_.c:2960 msgid "Change the printing system" msgstr "印刷システムを変更" #: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274 msgid "Normal Mode" msgstr "ノーマルモード" #: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176 #: ../../printer/printerdrake.pm_.c:3363 msgid "Do you want to configure another printer?" msgstr "別のプリンタを設定しますか？" #: ../../printer/printerdrake.pm_.c:3211 msgid "Modify printer configuration" msgstr "プリンタ設定の変更" #: ../../printer/printerdrake.pm_.c:3213 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "プリンタ %s\n" "このプリンタの何を変更しますか？" #: ../../printer/printerdrake.pm_.c:3217 msgid "Do it!" msgstr "やれ！" #: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271 msgid "Printer connection type" msgstr "プリンタ接続の種類" #: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275 msgid "Printer name, description, location" msgstr "プリンタの名前、説明、場所" #: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293 msgid "Printer manufacturer, model, driver" msgstr "プリンタのメーカー、機種、ドライバ" #: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294 msgid "Printer manufacturer, model" msgstr "プリンタのメーカー、機種" #: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304 msgid "Set this printer as the default" msgstr "このプリンタをデフォルトにする" #: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "このプリンタを Star Office/OpenOffice.org/GIMP に追加" #: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "このプリンタを Star Office/OpenOffice.org/GIMP から削除" #: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319 msgid "Print test pages" msgstr "テストページ印刷" #: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321 msgid "Know how to use this printer" msgstr "このプリンタの使い方を調べる" #: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323 msgid "Remove printer" msgstr "プリンタ削除" #: ../../printer/printerdrake.pm_.c:3282 #, c-format msgid "Removing old printer \"%s\"..." msgstr "古いプリンタ \"%s\" を削除中..." #: ../../printer/printerdrake.pm_.c:3307 msgid "Default printer" msgstr "デフォルトプリンタ" #: ../../printer/printerdrake.pm_.c:3308 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "プリンタ %s がデフォルトプリンタになりました。" #: ../../printer/printerdrake.pm_.c:3310 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "プリンタを Star Office/OpenOffice.org/GIMP に追加中" #: ../../printer/printerdrake.pm_.c:3312 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "プリンタ %s を Star Office/OpenOffice.org/GIMP に追加しました。" #: ../../printer/printerdrake.pm_.c:3313 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "プリンタ %s を Star Office/OpenOffice.org/GIMP に追加できませんでした。" #: ../../printer/printerdrake.pm_.c:3315 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "プリンタを Star Office/OpenOffice.org/GIMP から削除中" #: ../../printer/printerdrake.pm_.c:3317 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "プリンタ %s を Star Office/OpenOffice.org/GIMP から削除しました。" #: ../../printer/printerdrake.pm_.c:3318 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "プリンタ %s を Star Office/OpenOffice.org/GIMP から削除できませんでした。" #: ../../printer/printerdrake.pm_.c:3325 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "プリンタ %s を本当に削除しますか？" #: ../../printer/printerdrake.pm_.c:3329 #, c-format msgid "Removing printer \"%s\"..." msgstr "プリンタ \"%s\" を削除中..." #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "フォーマット済みの RAID md%d にはパーティションを追加できません" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid に失敗" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid に失敗 (raidtools が入ってないのかも?)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "RAID レベル %d のためにはパーティションが不足です\n" #: ../../security/main.pm_.c:36 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" #: ../../security/main.pm_.c:66 msgid "Security Level:" msgstr "セキュリティ水準:" #: ../../security/main.pm_.c:77 #, fuzzy, c-format msgid " (default value: %s)" msgstr " (デフォルト)" #: ../../security/main.pm_.c:113 #, fuzzy msgid "Security Alerts:" msgstr "セキュリティ水準" #: ../../security/main.pm_.c:115 #, fuzzy msgid "Security Administrator:" msgstr "セキュリティ管理者（ログインか電子メール）" #: ../../security/main.pm_.c:128 #, fuzzy msgid "Network Options" msgstr "その他オプション" #: ../../security/main.pm_.c:128 #, fuzzy msgid "System Options" msgstr "その他オプション" #: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" #: ../../security/main.pm_.c:177 msgid "Periodic Checks" msgstr "" #: ../../security/main.pm_.c:191 #, fuzzy msgid "Please wait, setting security level..." msgstr "セキュリティレベルの設定中" #: ../../security/main.pm_.c:197 #, fuzzy msgid "Please wait, setting security options..." msgstr "インストールの準備中、少々お待ちを" #: ../../services.pm_.c:19 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "ALSA (先進Linux サウンドアーキテクチャ) サウンドシステム起動" #: ../../services.pm_.c:20 msgid "Anacron a periodic command scheduler." msgstr "Anacron は定期的なコマンドスケジューラです。" #: ../../services.pm_.c:21 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd はバッテリーの状態を調べてそれをsyslog経由で記録します。\n" "電池がなくなったときにマシンをシャットダウンするのにも使えます。" #: ../../services.pm_.c:23 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "atコマンドでスケジュールされたコマンドを、at実行時に指定した時間に\n" "実行して、平均負荷が低いときにバッチコマンドを実行します。" #: ../../services.pm_.c:25 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cronはUNIX標準のプログラムで、ユーザ指定のプログラムを定期的に\n" "実行します。vixie cronは標準のUNIX cronに高度なセキュリティや\n" "強力な設定オプションなどの機能を追加しています。" #: ../../services.pm_.c:28 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM はMidnight CommanderなどテキストベースのLinuxソフトでマウスが\n" "使えるようにします。マウスによるコンソールでのカット・ペースト\n" "や、ポップアップメニューも使えます。" #: ../../services.pm_.c:31 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake はハードウェアを探して、可能なら新しいハードウェアや変更した\n" "ハードウェアの設定をします。" #: ../../services.pm_.c:33 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "ApacheはWorld Wide Webサーバで、HTML ファイルやCGIの公開に使います。" #: ../../services.pm_.c:34 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "インターネット・スーパーサーバ・デーモン (通称inetd) は、必要に\n" "応じてその他各種インターネットサービスを開始します。telnet、ftp、\n" "rsh、rloginなどのサービス開始を担当します。inetdを無効にすると、\n" "こうした各種サービスすべてが無効になります。" #: ../../services.pm_.c:38 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "ネットワーク攻撃からマシンを守るためのファイアーウォールを\n" "設定するには、Linux カーネル2.2 のパケットフィルタを起動します。" #: ../../services.pm_.c:40 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "このパッケージは、/etc/sysconfig/keyboardから設定したキーボードマップを\n" "ロードします。これはkbdconfigユーティリティを使って設定します。通常は\n" "有効にしておきましょう。" #: ../../services.pm_.c:43 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "/usr/include/linux/{autoconf,version}.h 用に\n" "/boot のカーネルヘッダを再生成します" #: ../../services.pm_.c:45 msgid "Automatic detection and configuration of hardware at boot." msgstr "起動時にハードウェアの自動検出と設定をする。" #: ../../services.pm_.c:46 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf はときどき、システム設定維持のために起動時に\n" "各種作業をします。" #: ../../services.pm_.c:48 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd はプリンタデーモンで、lprの動作に必要です。基本的に\n" "はプリンタに印刷ジョブを振り分けるサーバです。" #: ../../services.pm_.c:50 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux バーチャルサーバは、高性能でいつでも使えるサーバの\n" "構築に使います。" #: ../../services.pm_.c:52 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) は、IPアドレスとホスト名を結びつけるためのドメイン名サーバ" "（Domain Name Server, DNS) です。" #: ../../services.pm_.c:53 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "ネットワークファイルシステム (NFS), SMB (LanManager/Windows),\n" "NCP (NetWare) マウントポイントをすべてマウント・アンマウントします。" #: ../../services.pm_.c:55 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "起動時に有効にする設定のネットワークインターフェースをすべて、\n" "有効・無効にします。" #: ../../services.pm_.c:57 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS はTCP/IPネットワーク上でファイル共有をするのによく使うプロトコル\n" "です。このサービスは NFS サーバ機能を提供します。設定には/etc/exports \n" "ファイルを使います。" #: ../../services.pm_.c:60 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS はTCP/IPネットワーク上でファイル共有をするのによく使うプロトコル\n" "です。このサービスは NFS ファイルロック機能を提供します。" #: ../../services.pm_.c:62 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "起動時にコンソールと XFree で自動的に numlock を有効にする。" #: ../../services.pm_.c:64 msgid "Support the OKI 4w and compatible winprinters." msgstr "OKI 4w 互換のwinプリンタをサポート" #: ../../services.pm_.c:65 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "PCMCIA サポートは、ラップトップコンピュータでEthernetやモデム\n" "などのPCカードを使えるようにするためのものです。設定するまで\n" "は起動しないので、必要ないマシンに入れてあっても安全です。" #: ../../services.pm_.c:68 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "portmapper は RPC 接続を管理します。これはNFSやNISなどのプロトコルで\n" "使用されます。RPC機構を使うプロトコルのサーバとなるマシンでは、この\n" "portmap サーバが動いている必要があります。" #: ../../services.pm_.c:71 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix はメール転送エージェントです (MTA) です。これは、マシン間でメールをや" "りとりするプログラムです。" #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "乱数発生の質を上げるために、システムのエントロピープールを保存・\n" "復活させます。" #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "Oracle などのアプリケーションで使えるように、ブロックデバイス\n" "たとえばハードドライブパーティション）を生デバイスに割りつけます。" #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "routed デーモンは、RIPプロトコルを使ってIPテーブルの自動更新を\n" "可能にします。RIP は小規模ネットワークでは便利でよく使われますが、\n" "ネットワークが複雑になってくると、これでは不十分です。" #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "rstatプロトコルを使うと、ネットワーク上のユーザが、そのネットワーク\n" "に接続したマシンのすべてについて、性能指標を得られるようになります。" #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "rusersプロトコルでは、ネットワーク上のユーザが、応答するほかのマシン\n" "にログインしている人たちを見ることができます。" #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "rwho デーモンが走っているマシンでは、そのマシンにログイン中の\n" "ユーザ一覧をrwhoプロトコル経由で見られます (fingerに似ています)。" #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "サウンドシステムを起動" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog は、各種のデーモンがいろんなログファイルにメッセージを記録\n" "するときに使います。ずっと起動しておくほうがいいでしょう。" #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "usb デバイス用のドライバを読み込みましょう。" #: ../../services.pm_.c:89 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "Xフォントサーバを開始します（XFree 使用には必須）。" #: ../../services.pm_.c:115 ../../services.pm_.c:157 msgid "Choose which services should be automatically started at boot time" msgstr "起動時に自動的にたちあげるサービスを選んでください" #: ../../services.pm_.c:127 msgid "Printing" msgstr "印刷" #: ../../services.pm_.c:128 msgid "Internet" msgstr "インターネット" #: ../../services.pm_.c:131 msgid "File sharing" msgstr "ファイル共有" #: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709 msgid "System" msgstr "システム" #: ../../services.pm_.c:138 msgid "Remote Administration" msgstr "リモート管理" #: ../../services.pm_.c:146 msgid "Database Server" msgstr "データベースサーバ" #: ../../services.pm_.c:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "サービス: %d が %d 用に起動したのを登録" #: ../../services.pm_.c:191 msgid "Services" msgstr "サービス" #: ../../services.pm_.c:203 msgid "running" msgstr "実行中" #: ../../services.pm_.c:203 msgid "stopped" msgstr "停止中" #: ../../services.pm_.c:217 msgid "Services and deamons" msgstr "サービスとデーモン" #: ../../services.pm_.c:222 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "このサービスについては、追加の\n" "情報はありません。ごめんなさい。" #: ../../services.pm_.c:229 msgid "On boot" msgstr "起動時の動作" #: ../../services.pm_.c:241 msgid "Start" msgstr "開始" #: ../../services.pm_.c:241 msgid "Stop" msgstr "停止" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "Mandrake Linux 9.0をお選びいただきましてありがとうございます" #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "オープンソースの世界へようこそ" #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" "MandrakeSoft の成功は、フリーソフトの原理に根ざしたものです。あなたの新オペ" "レーティングシステムは、全世界の Linux コミュニティによる共同作業の成果なので" "す。" #: ../../share/advertising/02-community.pl_.c:9 msgid "Get involved in the Free Software world" msgstr "フリーソフトの世界に参加しましょう" #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "オープンソースコミュニティについてもっと詳しく知りたいですか？" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" "自分の知識を共有してLinuxツールの構築を助けるには、「コミュニティ」ウェブペー" "ジにあるフォーラムに参加しましょう。" #: ../../share/advertising/03-internet.pl_.c:9 msgid "Get the most from the Internet" msgstr "インターネットを最大限に活用" #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" "Mandrake Linux 9.0 は最高のソフトを取りそろえています。ウェブをサーフして、動" "画を見るならMozilla と Konqueror があるし、メールの送受信と個人情報管理は" "Evolution と Kmailが使えます。" #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "最新のグラフィックやマルチメディアツールをどうぞ" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "マルチメディアを使い倒しましょう！" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" "Mandrake Linux 9.0 では、最新ソフトで音楽や音声ファイルの再生をしたり、画像や" "写真を管理したり、テレビを見たりできます。" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "ゲーム" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "" "Mandrake Linux 9.0 には、最高のオープンソースゲームがついてきます。アーケード" "型、アクション型、カードゲーム、スポーツ、戦略ゲーム..." #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49 msgid "Mandrake Control Center" msgstr "Mandrake コントロールセンター" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "" "Mandrake Linux 9.0 コントロールセンターは、Mandrake システムのカスタマイズと" "設定のためのワンストップパネル集です。" #: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "ユーザインターフェイス" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" "Mandrake Linux 9.0には11種類のユーザインターフェースがついてきて、どれも好き" "なように変更できます: KDE 3, Gnome 2, WindowMaker, ..." #: ../../share/advertising/08-development.pl_.c:9 msgid "Development simplified" msgstr "開発も楽になりました" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "Mandrake Linux 9.0は究極の開発用プラットホームです" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "" "GNU gcc 3 コンパイラをはじめ、最高のオープンソース開発環境の威力を使いましょ" "う。" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "マシンを更新ライサーバに" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" "マウスをほんの数クリックするだけで、あなたのマシンは強力なサーバに早変わり！" "ウェブサーバ、メール、ファイアーウォール、ルータ、ファイルサーバに印刷サーバ" "などもろもろです。" #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "セキュリティの最適化" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" "MandrakeSecurity 製品には Multi Network Firewall 製品 (M.N.F.)もあります" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" "このファイアーウォール製品を使えば、セキュリティニーズをすべて満たせるネット" "ワーク機能が手に入ります。" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "この製品はMandrakeStoreウェブサイト上にあります" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "公式MandrakeSoft商店" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" "フルレンジのLinux ソリューションや、製品や各種アイテムの特価販売が、弊社のオ" "ンライン e-商店で手に入ります。" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "戦略パートナー" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" "MandrakeSoft は各種の企業と提携してMandrake Linuxと互換性のある高度なソリュー" "ションを提供します。こうしたパートナーの一覧もMandrakeStoreにあります" #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "MandrakeSoftの研修カタログLinux-Campusをどうぞ" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" "各種研修プログラムは、ユーザと専門家（ネットワークやシステム管理者）のニーズ" "に合うように作られています" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "Linuxの技能認定を得よう" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" "オンラインにせよネットワーク研修パートナーを通じてにせよ、Linux-Campus カタロ" "グは、認知度の高いLPI認定プログラム（世界的専門技術資格の取得準備の自習に最適" "です" #: ../../share/advertising/14-mdkexpert.pl_.c:9 msgid "Become a MandrakeExpert" msgstr "Mandrakeエキスパートになろう" #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "MandrakeSoftのオンラインサポートプラットホームで問題解決" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" "MandrakeSoft サポートチームとLinux コミュニティにオンラインで参加し、知識を共" "有して他の人を助けましょう。それには、オンライン技術サポートウェブサイト上で" "認知された専門家になりましょう:" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 msgid "MandrakeExpert Corporate" msgstr "Mandrake企業エキスパート" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "企業固有のサポートニーズに応えるオンラインプラットホーム" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "すべての事象が一人の高技能MandrakeSoft技術専門家によって追跡されます。" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "MandrakeClub と Mandrake Corporate Club" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" "MandrakeClub と Mandrake Corporate Club は、Mandrake Linuxのビジネスや個人" "ユーザがお気に入りのLinuxディストリビューションをサポートしつつ、ちょっとした" "メリットを手に入れるために作られました。弊社製品がお気に召したらあるいは御社" "が弊社製品で競争力を得ているなら、あるいはMandrake Linuxの開発をサポートした" "ければ、MandrakeClubに参加しましょう!" #: ../../standalone.pm_.c:21 #, fuzzy msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" " このプログラムはフリーソフトウェアです。Free Software Foundationの\n" " 発行する GNU 一般共有ライセンスのバージョン2以降の条件に従って\n" " 再配布・改変ができます。\n" "\n" " このプログラムは、役に立つべく配布されてはいますが、\n" " まったくの無保証です。商業性や、ある目的への適合性について\n" " 明示的、暗示的を問わず一切の保証を行いません。詳細は\n" " GNU 一般共有ライセンスを参照してください。\n" "\n" " GNU 一般共有ライセンスがこのプログラムには付属してきたはず\n" " です。付属していない場合には、以下に連絡して入手してください：\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, \n" " Boston, MA 02111-1307, USA." #: ../../standalone.pm_.c:40 msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version name.\n" msgstr "" #: ../../standalone.pm_.c:51 msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm_.c:57 msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm_.c:68 msgid "" "[OPTIONS]...\n" "\t --debug print debugging information" msgstr "" #: ../../standalone.pm_.c:70 msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm_.c:82 #, fuzzy msgid "[keyboard]" msgstr "キーボード" #: ../../standalone.pm_.c:83 msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm_.c:84 msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm_.c:93 msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm_.c:94 msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm_.c:99 msgid "" "[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] " "[--dynamic=dev]" msgstr "" #: ../../standalone.pm_.c:100 msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm_.c:114 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm_.c:168 msgid "Installing packages..." msgstr "パッケージのインストール中..." #: ../../standalone/XFdrake_.c:138 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "ログアウトした上で Ctrl-Alt-BackSpace を押して下さい" #: ../../standalone/XFdrake_.c:142 #, c-format msgid "Please relog into %s to activate the changes" msgstr "変更を有効にするには %s にログインしなおして下さい" #: ../../standalone/drakTermServ_.c:239 msgid "Mandrake Terminal Server Configuration" msgstr "Mandrakeターミナルサーバ設定" #: ../../standalone/drakTermServ_.c:253 msgid "Enable Server" msgstr "サーバを有効に" #: ../../standalone/drakTermServ_.c:260 msgid "Disable Server" msgstr "サーバを無効に" #: ../../standalone/drakTermServ_.c:268 msgid "Start Server" msgstr "サーバ起動" #: ../../standalone/drakTermServ_.c:275 msgid "Stop Server" msgstr "サーバ停止" #: ../../standalone/drakTermServ_.c:283 msgid "Etherboot Floppy/ISO" msgstr "Etherboot Floppy/ISO" #: ../../standalone/drakTermServ_.c:288 msgid "Net Boot Images" msgstr "ネットブートイメージ" #: ../../standalone/drakTermServ_.c:294 msgid "Add/Del Users" msgstr "ユーザを追加/削除" #: ../../standalone/drakTermServ_.c:299 msgid "Add/Del Clients" msgstr "クライアント追加/削除" #: ../../standalone/drakTermServ_.c:328 #, fuzzy msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" " updates 2002 MandrakeSoft by Stew Benedict " #: ../../standalone/drakTermServ_.c:332 msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:365 msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t/*type fat;*/\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"/*type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"*/\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/" "etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:488 msgid "Boot Floppy" msgstr "起動フロッピー" #: ../../standalone/drakTermServ_.c:490 msgid "Boot ISO" msgstr "起動 ISO" #: ../../standalone/drakTermServ_.c:559 msgid "Build Whole Kernel -->" msgstr "カーネル全体を構築 -->" #: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591 msgid "This will take a few minutes." msgstr "これにはしばらくかかります。" #: ../../standalone/drakTermServ_.c:573 msgid "No kernel selected!" msgstr "カーネルが一つも選ばれていません！" #: ../../standalone/drakTermServ_.c:576 msgid "Build Single NIC -->" msgstr "単一NICを構築 -->" #: ../../standalone/drakTermServ_.c:587 msgid "No nic selected!" msgstr "nic が選ばれていません!" #: ../../standalone/drakTermServ_.c:590 msgid "Build All Kernels -->" msgstr "全カーネル構築 -->" #: ../../standalone/drakTermServ_.c:604 msgid "<-- Delete" msgstr "<-- 削除" #: ../../standalone/drakTermServ_.c:611 msgid "Delete All NBIs" msgstr "NBI すべて削除" #: ../../standalone/drakTermServ_.c:668 msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ_.c:673 msgid "Add User -->" msgstr "ユーザ追加 -->" #: ../../standalone/drakTermServ_.c:681 msgid "<-- Del User" msgstr "<-- ユーザ削除" #: ../../standalone/drakTermServ_.c:720 #, fuzzy, c-format msgid "type: %s" msgstr "タイプ: " #: ../../standalone/drakTermServ_.c:753 #, fuzzy msgid "No net boot images created!" msgstr "ネットブートイメージ" #: ../../standalone/drakTermServ_.c:773 #, fuzzy msgid "Thin Client" msgstr "DHCP クライアント" #: ../../standalone/drakTermServ_.c:775 #, fuzzy msgid "Allow Thin Clients" msgstr "クライアント追加/削除" #: ../../standalone/drakTermServ_.c:778 msgid "Add Client -->" msgstr "クライアント追加 -->" #: ../../standalone/drakTermServ_.c:821 #, fuzzy msgid "<-- Edit Client" msgstr "<-- クライアント削除" #: ../../standalone/drakTermServ_.c:837 #, fuzzy msgid "Delete Client" msgstr "<-- クライアント削除" #: ../../standalone/drakTermServ_.c:843 msgid "dhcpd Config..." msgstr "dhcpd 設定中..." #: ../../standalone/drakTermServ_.c:876 msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ_.c:894 msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ_.c:901 #, fuzzy msgid "Netmask:" msgstr "ネットマスク:" #: ../../standalone/drakTermServ_.c:908 msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ_.c:915 msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ_.c:922 msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ_.c:929 #, fuzzy msgid "Domain Name:" msgstr "ドメイン名" #: ../../standalone/drakTermServ_.c:937 #, fuzzy msgid "Name Servers:" msgstr "samba サーバ" #: ../../standalone/drakTermServ_.c:948 msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ_.c:949 msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ_.c:1001 #, fuzzy msgid "dhcpd Server Configuration" msgstr "上級設定" #: ../../standalone/drakTermServ_.c:1002 msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakTermServ_.c:1005 msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ_.c:1018 msgid "Write Config" msgstr "設定書き込み" #: ../../standalone/drakTermServ_.c:1120 msgid "Please insert floppy disk:" msgstr "フロッピーを挿入してください:" #: ../../standalone/drakTermServ_.c:1124 msgid "Couldn't access the floppy!" msgstr "フロッピーにアクセスできません!" #: ../../standalone/drakTermServ_.c:1126 msgid "Floppy can be removed now" msgstr "フロッピーを取り除いても大丈夫です" #: ../../standalone/drakTermServ_.c:1129 msgid "No floppy drive available!" msgstr "有効なフロッピードライブがありません" #: ../../standalone/drakTermServ_.c:1138 #, c-format msgid "Etherboot ISO image is %s" msgstr "Etherboot ISO イメージは %s" #: ../../standalone/drakTermServ_.c:1140 msgid "Something went wrong! - Is mkisofs installed?" msgstr "何か失敗しました！ -　mkisofs はインストールされていますか？" #: ../../standalone/drakTermServ_.c:1159 msgid "Need to create /etc/dhcpd.conf first!" msgstr "最初に /etc/dhcpd.conf を作ってください！" #: ../../standalone/drakTermServ_.c:1451 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakautoinst_.c:40 msgid "Error!" msgstr "エラー！" #: ../../standalone/drakautoinst_.c:41 #, c-format msgid "I can't find needed image file `%s'." msgstr "必要な画像ファイル %s が見つかりません。" #: ../../standalone/drakautoinst_.c:43 msgid "Auto Install Configurator" msgstr "自動インストール設定" #: ../../standalone/drakautoinst_.c:44 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "これから自動インストールフロッピーを設定します。この機能はいささか危険なので" "慎重に使ってください。\n" "\n" "この機能では、このコンピュータでやったインストールを別のマシンで再現できま" "す。ただしときどきプロンプトが出て、値が変更できます。\n" "\n" "いちばん安全にやるには、パーティション切りとフォーマットは自動化してはいけま" "せん。どんなパーティション方式にした場合でもそうです。\n" "\n" "続けますか？" #: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71 msgid "manual" msgstr "" #: ../../standalone/drakautoinst_.c:62 #, fuzzy msgid "replay" msgstr "再生" #: ../../standalone/drakautoinst_.c:66 msgid "Automatic Steps Configuration" msgstr "起動ステップ設定" #: ../../standalone/drakautoinst_.c:67 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "各ステップで、あなたのインストールと同じにするか、手動設定するかを選びます。" #: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79 msgid "Creating auto install floppy" msgstr "自動インストールフロッピーの作成" #: ../../standalone/drakautoinst_.c:139 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "いらっしゃいませ〜\n" "\n" "自動インストールのパラメータが左に表示されています" #: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504 #: ../../standalone/scannerdrake_.c:117 msgid "Congratulations!" msgstr "おめでとうございます！" #: ../../standalone/drakautoinst_.c:235 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "フロッピーが正しく作られました。\n" "これでインストールが再現できます。" #: ../../standalone/drakautoinst_.c:273 msgid "Auto Install" msgstr "自動インストール" #: ../../standalone/drakautoinst_.c:343 msgid "Add an item" msgstr "アイテム追加" #: ../../standalone/drakautoinst_.c:350 msgid "Remove the last item" msgstr "最後のアイテムを削除" #: ../../standalone/drakbackup_.c:580 msgid "Cron not available yet as non-root" msgstr "Cron はまだroot以外では使えません" #: ../../standalone/drakbackup_.c:690 msgid "WARNING" msgstr "*** 警告 ***" #: ../../standalone/drakbackup_.c:691 msgid "FATAL" msgstr "*** 致命的 ***" #: ../../standalone/drakbackup_.c:692 msgid "INFO" msgstr "情報" #: ../../standalone/drakbackup_.c:704 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" "\n" " DrakBackup 報告 \n" "\n" #: ../../standalone/drakbackup_.c:705 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" "\n" " DrakBackup デーモン報告\n" "\n" "\n" #: ../../standalone/drakbackup_.c:709 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup 詳細報告\n" "\n" "\n" #: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803 #: ../../standalone/drakbackup_.c:859 msgid "Total progess" msgstr "進行状況" #: ../../standalone/drakbackup_.c:785 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s はすでに存在します。削除しますか?\n" "\n" "警告：このプロセスを前にやったことがあれば、たぶんサーバ上の\n" "authorized_keys からエントリを削除したほうがいいですよ。" #: ../../standalone/drakbackup_.c:794 msgid "This may take a moment to generate the keys." msgstr "鍵の生成にしばらくかかります。" #: ../../standalone/drakbackup_.c:801 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "エラー：%s を展開できません。" #: ../../standalone/drakbackup_.c:818 #, c-format msgid "No password prompt on %s at port %s" msgstr "%s がポート %sでパスワードプロンプトが出ません" #: ../../standalone/drakbackup_.c:819 #, c-format msgid "Bad password on %s" msgstr "%s のパスワード不良" #: ../../standalone/drakbackup_.c:820 #, c-format msgid "Permission denied transferring %s to %s" msgstr "%s を %s に転送するのが認められませんでした" #: ../../standalone/drakbackup_.c:821 #, c-format msgid "Can't find %s on %s" msgstr "%s が %s上で見つかりません" #: ../../standalone/drakbackup_.c:824 #, c-format msgid "%s not responding" msgstr "%s が応答しません" #: ../../standalone/drakbackup_.c:828 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" "転送に成功しました。\n" "以下のコマンドで、サーバにログインできるか確認してみてください:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "パスワードのプロンプトが出なければ成功です。" #: ../../standalone/drakbackup_.c:873 msgid "WebDAV remote site already in sync!" msgstr "WebDAVリモートサイトとすでに同期済み!" #: ../../standalone/drakbackup_.c:877 msgid "WebDAV transfer failed!" msgstr "WebDAV転送失敗!" #: ../../standalone/drakbackup_.c:898 msgid "No CDR/DVDR in drive!" msgstr "CDR/DVDR がドライブにありません!" #: ../../standalone/drakbackup_.c:902 msgid "Does not appear to be recordable media!" msgstr "記録可能メディアではないようです!" #: ../../standalone/drakbackup_.c:906 msgid "Not erasable media!" msgstr "消去可能メディアではないようです!" #: ../../standalone/drakbackup_.c:945 msgid "This may take a moment to erase the media." msgstr "メディアの消去にはしばらくかかります。" #: ../../standalone/drakbackup_.c:1033 msgid "Permission problem accessing CD." msgstr "CDアクセス権限の問題が発生しました。" #: ../../standalone/drakbackup_.c:1060 #, c-format msgid "No tape in %s!" msgstr "%s にテープがありません" #: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223 msgid "Backup system files..." msgstr "システムファイルのバックアップ..." #: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291 msgid "Hard Disk Backup files..." msgstr "ハードディスクのバックアップファイル..." #: ../../standalone/drakbackup_.c:1236 msgid "Backup User files..." msgstr "ユーザファイルのバックアップ..." #: ../../standalone/drakbackup_.c:1237 msgid "Hard Disk Backup Progress..." msgstr "ハードディスクバックアップの進行..." #: ../../standalone/drakbackup_.c:1290 msgid "Backup Other files..." msgstr "他のファイルをバックアップ..." #: ../../standalone/drakbackup_.c:1296 msgid "No changes to backup!" msgstr "バックアップする変更がありません" #: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "%s 経由のDrakbackup:\n" "\n" #: ../../standalone/drakbackup_.c:1319 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "FTP で送ったファイル一覧: %s\n" " " #: ../../standalone/drakbackup_.c:1322 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" "(!) FTP 接続のトラブル: FTPでバックアップファイルを送れませんでした。\n" #: ../../standalone/drakbackup_.c:1340 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "CD 経由のDrakbackup:\n" ":\n" "\n" #: ../../standalone/drakbackup_.c:1345 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "テープ 経由のDrakbackup:\n" ":\n" "\n" #: ../../standalone/drakbackup_.c:1354 msgid " Error during mail sending. \n" msgstr "メール送信中にエラー。\n" #: ../../standalone/drakbackup_.c:1380 msgid "Can't create catalog!" msgstr "カタログが作れません!" #: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501 #: ../../standalone/drakfont_.c:946 msgid "File Selection" msgstr "ファイルを選択" #: ../../standalone/drakbackup_.c:1529 msgid "Select the files or directories and click on 'Add'" msgstr "ファイルやディレクトリを選んで「追加」をクリックします" #: ../../standalone/drakbackup_.c:1573 msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "必要なオプションにチェックをつけてください。\n" #: ../../standalone/drakbackup_.c:1574 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "このオプションは /etc ディレクトリのファイルをすべてバックアップ・復元できま" "す。\n" #: ../../standalone/drakbackup_.c:1575 msgid "Backup your System files. (/etc directory)" msgstr "システムファイルのバックアップ（/etcディレクトリ)" #: ../../standalone/drakbackup_.c:1576 msgid "Use incremental backup (do not replace old backups)" msgstr "インクリメンタルバックアップ（古いバックアップは残す)" #: ../../standalone/drakbackup_.c:1577 msgid "Do not include critical files (passwd, group, fstab)" msgstr "重要ファイル (passwd, group, fstab) は含めない" #: ../../standalone/drakbackup_.c:1578 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "このオプションでは、好きなバージョンの /etc ディレクトリを\n" "復元できます。" #: ../../standalone/drakbackup_.c:1595 msgid "Please check all users that you want to include in your backup." msgstr "バックアップに含めたいユーザを全員選んで下さい" #: ../../standalone/drakbackup_.c:1622 msgid "Do not include the browser cache" msgstr "ブラウザのキャッシュは含めない" #: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647 msgid "Use Incremental Backups (do not replace old backups)" msgstr "インクリメンタルバックアップ（古いバックアップは残す)" #: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000 msgid "Remove Selected" msgstr "選んだものを削除" #: ../../standalone/drakbackup_.c:1679 msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../standalone/drakbackup_.c:1714 msgid "Users" msgstr "ユーザ名" #: ../../standalone/drakbackup_.c:1740 msgid "Use network connection to backup" msgstr "バックアップにネットワーク接続を使用" #: ../../standalone/drakbackup_.c:1742 msgid "Net Method:" msgstr "ネット方式: " #: ../../standalone/drakbackup_.c:1746 msgid "Use Expect for SSH" msgstr "Use Expect for SSH" #: ../../standalone/drakbackup_.c:1747 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" "SSHバックアップ鍵の\n" "作成/転送" #: ../../standalone/drakbackup_.c:1748 msgid "" " Transfer \n" "Now" msgstr "" " 今すぐ \n" "転送" #: ../../standalone/drakbackup_.c:1749 #, fuzzy msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "すでに鍵がセットされています" #: ../../standalone/drakbackup_.c:1753 msgid "Please enter the host name or IP." msgstr "ホスト名か IP を入力してください。" #: ../../standalone/drakbackup_.c:1758 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" "このホスト上でバックアップを保存する\n" "ディレクトリかモジュールを入力してください" #: ../../standalone/drakbackup_.c:1763 msgid "Please enter your login" msgstr "ログイン名を入力してください" #: ../../standalone/drakbackup_.c:1768 msgid "Please enter your password" msgstr "パスワードを入力してください" #: ../../standalone/drakbackup_.c:1774 msgid "Remember this password" msgstr "このパスワードを記憶する" #: ../../standalone/drakbackup_.c:1785 msgid "Need hostname, username and password!" msgstr "ホスト名、ユーザ名、パスワードが必須です!" #: ../../standalone/drakbackup_.c:1879 msgid "Use CD/DVDROM to backup" msgstr "CD/DVDROM にバックアップ" #: ../../standalone/drakbackup_.c:1882 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" "CD/DVD デバイスを選んでください\n" "(他のフィールド自動入力には Enter を押してください。\n" "このフィールドは必須ではなく、フォーム入力のツールでしかありません)" #: ../../standalone/drakbackup_.c:1887 msgid "Please choose your CD/DVD media size (Mb)" msgstr "CD/DVD メディアのサイズを選んでください" #: ../../standalone/drakbackup_.c:1893 msgid "Please check for multisession CD" msgstr "マルチセッションCDかどうかチェックしてください" #: ../../standalone/drakbackup_.c:1899 msgid "Please check if you are using CDRW media" msgstr "CDRWを使っている場合はチェックしてください" #: ../../standalone/drakbackup_.c:1905 msgid "Please check if you want to erase your RW media (1st Session)" msgstr "RW メディア（最初のセッション) を消去するにはチェックしてください" #: ../../standalone/drakbackup_.c:1906 msgid " Erase Now " msgstr "今すぐ消去" #: ../../standalone/drakbackup_.c:1912 msgid "Please check if you are using a DVDR device" msgstr "DVDRを使っている場合はチェックしてください" #: ../../standalone/drakbackup_.c:1918 msgid "Please check if you are using a DVDRAM device" msgstr "DVDRAMを使っている場合はチェックしてください" #: ../../standalone/drakbackup_.c:1931 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "CD ライターのデバイス名を入力してください\n" "例: 0,1,0" #: ../../standalone/drakbackup_.c:1964 msgid "No CD device defined!" msgstr "CDデバイスが定義されていません!" #: ../../standalone/drakbackup_.c:2012 msgid "Use tape to backup" msgstr "テープにバックアップ" #: ../../standalone/drakbackup_.c:2015 msgid "Please enter the device name to use for backup" msgstr "バックアップ用デバイス名を入力してください" #: ../../standalone/drakbackup_.c:2021 msgid "Please check if you want to use the non-rewinding device." msgstr "巻き戻しなしのデバイスを使うにはここをチェック" #: ../../standalone/drakbackup_.c:2027 msgid "Please check if you want to erase your tape before the backup." msgstr "バックアップ前にテープを消去するにはここをチェック" #: ../../standalone/drakbackup_.c:2033 msgid "Please check if you want to eject your tape after the backup." msgstr "バックアップ後にテープをイジェクトするにはここをチェック" #: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112 #: ../../standalone/drakbackup_.c:3068 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" "Drakbackupに許される最大サイズを\n" "入力してください" #: ../../standalone/drakbackup_.c:2103 msgid "Please enter the directory to save to:" msgstr "保存先のディレクトリを入力してください:" #: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074 msgid "Use quota for backup files." msgstr "バックアップファイルのクォータを使う" #: ../../standalone/drakbackup_.c:2180 msgid "Network" msgstr "ネットワーク" #: ../../standalone/drakbackup_.c:2185 msgid "CDROM / DVDROM" msgstr "CDROM / DVDROM" #: ../../standalone/drakbackup_.c:2190 msgid "HardDrive / NFS" msgstr "ハードドライブ / NFS" #: ../../standalone/drakbackup_.c:2195 msgid "Tape" msgstr "テープ" #: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212 #: ../../standalone/drakbackup_.c:2216 msgid "hourly" msgstr "毎時間" #: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213 #: ../../standalone/drakbackup_.c:2216 msgid "daily" msgstr "毎日" #: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214 #: ../../standalone/drakbackup_.c:2216 msgid "weekly" msgstr "毎週" #: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215 #: ../../standalone/drakbackup_.c:2216 msgid "monthly" msgstr "毎月" #: ../../standalone/drakbackup_.c:2229 msgid "Use daemon" msgstr "デーモンを使う" #: ../../standalone/drakbackup_.c:2234 msgid "" "Please choose the time \n" "interval between each backup" msgstr "バックアップの間隔を選んでください" #: ../../standalone/drakbackup_.c:2240 msgid "" "Please choose the\n" "media for backup." msgstr "" "バックアップのメディアを\n" "選んでくださいね。" #: ../../standalone/drakbackup_.c:2247 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" "サービスに cron デーモンが含まれていることを確認してください.\n" "\n" "現在すべてのネットメディアは、ハードディスクも使います。" #: ../../standalone/drakbackup_.c:2283 msgid "Send mail report after each backup to:" msgstr "バックアップ毎の報告メール送り先: " #: ../../standalone/drakbackup_.c:2289 msgid "Delete Hard Drive tar files after backup to other media." msgstr "他のメディアにバックアップしたらハードドライブのtarファイルを削除" #: ../../standalone/drakbackup_.c:2324 msgid "What" msgstr "何を" #: ../../standalone/drakbackup_.c:2329 msgid "Where" msgstr "そこに" #: ../../standalone/drakbackup_.c:2334 msgid "When" msgstr "いつ" #: ../../standalone/drakbackup_.c:2339 msgid "More Options" msgstr "その他オプション" #: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444 msgid "Drakbackup Configuration" msgstr "Drakbackup 設定" #: ../../standalone/drakbackup_.c:2376 msgid "Please choose where you want to backup" msgstr "バックアップ先を選んで下さい" #: ../../standalone/drakbackup_.c:2378 msgid "on Hard Drive" msgstr "ハードドライブへ" #: ../../standalone/drakbackup_.c:2388 msgid "across Network" msgstr "ネットワーク経由で" #: ../../standalone/drakbackup_.c:2398 msgid "on CDROM" msgstr "CDROM上に" #: ../../standalone/drakbackup_.c:2406 msgid "on Tape Device" msgstr "テープデバイスに" #: ../../standalone/drakbackup_.c:2449 msgid "Please choose what you want to backup" msgstr "バックアップしたいものを選んで下さい" #: ../../standalone/drakbackup_.c:2450 msgid "Backup system" msgstr "システムをバックアップ" #: ../../standalone/drakbackup_.c:2451 msgid "Backup Users" msgstr "ユーザをバックアップ" #: ../../standalone/drakbackup_.c:2454 msgid "Select user manually" msgstr "ユーザを手動で選ぶ" #: ../../standalone/drakbackup_.c:2537 msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "バックアップ元: \n" #: ../../standalone/drakbackup_.c:2538 msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- システムファイル:\n" #: ../../standalone/drakbackup_.c:2540 msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- ユーザファイル:\n" #: ../../standalone/drakbackup_.c:2542 msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- その他ファイル:\n" #: ../../standalone/drakbackup_.c:2544 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- ハードドライブ上の保存パス: %s\n" #: ../../standalone/drakbackup_.c:2547 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- バックアップ後にハードドライブのtarファイル削除\n" #: ../../standalone/drakbackup_.c:2553 msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- CDに焼く" #: ../../standalone/drakbackup_.c:2554 msgid "RW" msgstr "RW" #: ../../standalone/drakbackup_.c:2555 #, c-format msgid " on device: %s" msgstr "以下のデバイス上: %s" #: ../../standalone/drakbackup_.c:2556 msgid " (multi-session)" msgstr " (マルチセッション)" #: ../../standalone/drakbackup_.c:2557 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- 以下のデバイスのテープに保存: %s" #: ../../standalone/drakbackup_.c:2558 #, c-format msgid "\t\tErase=%s" msgstr "\t\tErase=%s" #: ../../standalone/drakbackup_.c:2561 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- 以下のホスト上の%sに保存: %s\n" #: ../../standalone/drakbackup_.c:2562 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t ユーザ名: %s\n" "\t\t パス: %s \n" #: ../../standalone/drakbackup_.c:2563 msgid "" "\n" "- Options:\n" msgstr "" "\n" "- オプション:\n" #: ../../standalone/drakbackup_.c:2564 msgid "\tDo not include System Files\n" msgstr "\tシステムファイルは含めない\n" #: ../../standalone/drakbackup_.c:2567 msgid "\tBackups use tar and bzip2\n" msgstr "\tバックアップで tar と bzip2を使用\n" #: ../../standalone/drakbackup_.c:2569 msgid "\tBackups use tar and gzip\n" msgstr "\tバックアップで tar と gzipを使用\n" #: ../../standalone/drakbackup_.c:2572 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" "\n" "- デーモン (%s) が含むもの :\n" #: ../../standalone/drakbackup_.c:2573 msgid "\t-Hard drive.\n" msgstr "\t-ハードドライブ。\n" #: ../../standalone/drakbackup_.c:2574 msgid "\t-CDROM.\n" msgstr "\t-CDROM.\n" #: ../../standalone/drakbackup_.c:2575 msgid "\t-Tape \n" msgstr "\t-テープ \n" #: ../../standalone/drakbackup_.c:2576 msgid "\t-Network by FTP.\n" msgstr "\t-ネットワークで FTP.\n" #: ../../standalone/drakbackup_.c:2577 msgid "\t-Network by SSH.\n" msgstr "\t-ネットワークで SSH.\n" #: ../../standalone/drakbackup_.c:2578 msgid "\t-Network by rsync.\n" msgstr "\t-ネットワークで rsync.\n" #: ../../standalone/drakbackup_.c:2579 msgid "\t-Network by webdav.\n" msgstr "\t-ネットワークで webdav.\n" #: ../../standalone/drakbackup_.c:2581 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "設定がありません。ウィザードか上級をクリックしてください\n" #: ../../standalone/drakbackup_.c:2587 msgid "" "List of data to restore:\n" "\n" msgstr "" "復元するデータの一覧:\n" "\n" #: ../../standalone/drakbackup_.c:2754 msgid "" "List of data corrupted:\n" "\n" msgstr "" "壊れているデータ一覧:\n" "\n" #: ../../standalone/drakbackup_.c:2756 msgid "Please uncheck or remove it on next time." msgstr "次回にチェックをはずすか削除してください。" #: ../../standalone/drakbackup_.c:2766 msgid "Backup files are corrupted" msgstr "バックアップファイルが壊れています" #: ../../standalone/drakbackup_.c:2787 msgid " All of your selected data have been " msgstr " 選択したデータはすべて " #: ../../standalone/drakbackup_.c:2788 #, c-format msgid " Successfuly Restored on %s " msgstr " %s 上に復元されました " #: ../../standalone/drakbackup_.c:2906 msgid " Restore Configuration " msgstr " 設定復元 " #: ../../standalone/drakbackup_.c:2924 msgid "OK to restore the other files." msgstr "他のファイル復元にはOKを" #: ../../standalone/drakbackup_.c:2941 msgid "User list to restore (only the most recent date per user is important)" msgstr "復元するユーザの一覧（各ユーザの最新の日付だけが重要です）" #: ../../standalone/drakbackup_.c:3019 msgid "Backup the system files before:" msgstr "システムファイルのバックアップ期限:" #: ../../standalone/drakbackup_.c:3021 msgid "please choose the date to restore" msgstr "復元する日付を選択してください" #: ../../standalone/drakbackup_.c:3057 msgid "Use Hard Disk to backup" msgstr "バックアップにハードディスクを使用" #: ../../standalone/drakbackup_.c:3060 msgid "Please enter the directory to save:" msgstr "保存するディレクトリを入力してください:" #: ../../standalone/drakbackup_.c:3103 msgid "FTP Connection" msgstr "FTP 接続" #: ../../standalone/drakbackup_.c:3110 msgid "Secure Connection" msgstr "セキュア接続" #: ../../standalone/drakbackup_.c:3134 msgid "Restore from Hard Disk." msgstr "ハードディスクから復元する" #: ../../standalone/drakbackup_.c:3136 msgid "Please enter the directory where backups are stored" msgstr "バックアップの保存ディレクトリを入力してください" #: ../../standalone/drakbackup_.c:3204 msgid "Select another media to restore from" msgstr "復元元のメディアを選びなおしてください" #: ../../standalone/drakbackup_.c:3206 msgid "Other Media" msgstr "その他メディア" #: ../../standalone/drakbackup_.c:3211 msgid "Restore system" msgstr "システム復元" #: ../../standalone/drakbackup_.c:3212 msgid "Restore Users" msgstr "ユーザ復元" #: ../../standalone/drakbackup_.c:3213 msgid "Restore Other" msgstr "その他ファイルを復元" #: ../../standalone/drakbackup_.c:3215 msgid "select path to restore (instead of /)" msgstr "復元パスを選ぶ（/以外)" #: ../../standalone/drakbackup_.c:3219 msgid "Do new backup before restore (only for incremental backups.)" msgstr "復元前に新規バックアップ（インクリメンタルバックアップのみ）" #: ../../standalone/drakbackup_.c:3221 msgid "Remove user directories before restore." msgstr "復元前にユーザディレクトリを削除" #: ../../standalone/drakbackup_.c:3334 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "選択したカタログエントリを\n" "復活" #: ../../standalone/drakbackup_.c:3344 msgid "" "Restore Selected\n" "Files" msgstr "" "選んだファイル\n" "を削除" #: ../../standalone/drakbackup_.c:3361 msgid "" "Change\n" "Restore Path" msgstr "" "復元パスを\n" "変更" #: ../../standalone/drakbackup_.c:3427 #, c-format msgid "Backup files not found at %s." msgstr "%sにバックアップファイルがありません" #: ../../standalone/drakbackup_.c:3440 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "ボリュームラベル%sのCDを\n" "/mnt/cdrom下のCDドライブに入れてください" #: ../../standalone/drakbackup_.c:3440 msgid "Restore From CD" msgstr "CDから復元する" #: ../../standalone/drakbackup_.c:3442 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "CDラベルがまちがっています。このディスクは%sです。" #: ../../standalone/drakbackup_.c:3452 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "ボリュームラベル%sのテープを\n" "%sのテープドライブに入れてください" #: ../../standalone/drakbackup_.c:3452 msgid "Restore From Tape" msgstr "テープから復元" #: ../../standalone/drakbackup_.c:3454 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "テープのラベルがまちがっています。このテープは%sです。" #: ../../standalone/drakbackup_.c:3474 msgid "Restore Via Network" msgstr "ネットワークから復元" #: ../../standalone/drakbackup_.c:3474 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "以下のネットワークプロトコルで復元: %s" #: ../../standalone/drakbackup_.c:3475 msgid "Host Name" msgstr "ホスト名" #: ../../standalone/drakbackup_.c:3476 msgid "Host Path or Module" msgstr "ホストのパスかモジュール" #: ../../standalone/drakbackup_.c:3483 msgid "Password required" msgstr "パスワードが要ります" #: ../../standalone/drakbackup_.c:3489 msgid "Username required" msgstr "ユーザ名が要ります" #: ../../standalone/drakbackup_.c:3492 msgid "Hostname required" msgstr "ホスト名が要ります" #: ../../standalone/drakbackup_.c:3497 msgid "Path or Module required" msgstr "パスかモジュールが要ります" #: ../../standalone/drakbackup_.c:3510 msgid "Files Restored..." msgstr "復元されたファイル..." #: ../../standalone/drakbackup_.c:3513 msgid "Restore Failed..." msgstr "復元失敗..." #: ../../standalone/drakbackup_.c:3751 msgid "Restore all backups" msgstr "全バックアップの復元" #: ../../standalone/drakbackup_.c:3760 msgid "Custom Restore" msgstr "カスタム復元" #: ../../standalone/drakbackup_.c:3804 msgid "CD in place - continue." msgstr "CDがセット- 続ける" #: ../../standalone/drakbackup_.c:3810 msgid "Browse to new restore repository." msgstr "新しい復元repositoryを見る" #: ../../standalone/drakbackup_.c:3813 msgid "Restore From Catalog" msgstr "カタログから復元" #: ../../standalone/drakbackup_.c:3841 msgid "Restore Progress" msgstr "復元進行中" #: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916 #: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056 #: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113 #: ../../standalone/drakbackup_.c:4139 msgid "Previous" msgstr "もどる" #: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973 #: ../../standalone/logdrake_.c:203 msgid "Save" msgstr "保存" #: ../../standalone/drakbackup_.c:3946 msgid "Build Backup" msgstr "バックアップ構築" #: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544 msgid "Restore" msgstr "復元" #: ../../standalone/drakbackup_.c:4189 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "メール送信エラー\n" " 報告メールは送信できません\n" " sendmailを設定してください" #: ../../standalone/drakbackup_.c:4195 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "FTPでのファイル転送中にエラー.\n" "FTP 設定をなおしてください." #: ../../standalone/drakbackup_.c:4209 msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "" "以下のパッケージのインストールが必要です:\n" " @list_of_rpm_to_install" #: ../../standalone/drakbackup_.c:4232 msgid "Please select data to restore..." msgstr "復元データを選んでくださいね。" #: ../../standalone/drakbackup_.c:4267 msgid "Please select media for backup..." msgstr "バックアップ用メディアを選んでくださいね。" #: ../../standalone/drakbackup_.c:4275 msgid "Please select data to backup..." msgstr "バックアップするデータを選んでください..." #: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "設定ファイルが見つかりません\n" "ウィザードか上級をクリックしてください。" #: ../../standalone/drakbackup_.c:4308 msgid "Under Devel ... please wait." msgstr "まだ開発中...待っててください。" #: ../../standalone/drakbackup_.c:4382 msgid "Backup system files" msgstr "システムファイルをバックアップ" #: ../../standalone/drakbackup_.c:4384 msgid "Backup user files" msgstr "ユーザファイルをバックアップ" #: ../../standalone/drakbackup_.c:4386 msgid "Backup other files" msgstr "その他ファイルをバックアップ" #: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421 msgid "Total Progress" msgstr "全体の進行状況" #: ../../standalone/drakbackup_.c:4412 msgid "files sending by FTP" msgstr "FTPでファイル送信中" #: ../../standalone/drakbackup_.c:4416 msgid "Sending files..." msgstr "ファイル送信中..." #: ../../standalone/drakbackup_.c:4500 msgid "Backup Now from configuration file" msgstr "設定ファイルから今すぐバックアップ" #: ../../standalone/drakbackup_.c:4505 msgid "View Backup Configuration." msgstr "バックアップ設定を見る" #: ../../standalone/drakbackup_.c:4526 msgid "Wizard Configuration" msgstr "ウィザード設定" #: ../../standalone/drakbackup_.c:4531 msgid "Advanced Configuration" msgstr "上級設定" #: ../../standalone/drakbackup_.c:4536 msgid "Backup Now" msgstr "今すぐパックアップ" #: ../../standalone/drakbackup_.c:4576 msgid "Drakbackup" msgstr "Drakbackup" #: ../../standalone/drakbackup_.c:4624 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" "オプションの説明:\n" "\n" " このステップでは、Drakbackup で以下が変更できます:\n" "\n" " - 圧縮モード:\n" " \n" " bzip2 圧縮を選べば、圧縮率は gzip より高く\n" " なります ( 2-10 %ほど改善).\n" " デフォルトでは無効にしてあります。圧縮にかかる\n" " 時間が増えるからです ( 10倍程度).\n" " \n" " - 更新モード:\n" "\n" " このオプションはバックアップを更新してくれますが、\n" " 実はあまり役にたちません。更新するときバックアップを\n" " わざわざ展開しないとダメだからです。\n" " \n" " - .backupignore （バックアップ無視）モード:\n" "\n" " cvs と同じように、Drakbackup は 各ディレクトリの\n" " .backupignore ファイルに記述されたものを無視します。\n" " 例: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" #: ../../standalone/drakbackup_.c:4654 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" "\n" " メール送信中の一部のエラーは、postfixの設定が\n" " まちがっているせいです。これを直すには、\n" " /etc/postfix/main.cfの myhostname か mydomain を設定します。\n" "\n" #: ../../standalone/drakbackup_.c:4662 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" "オプションの説明:\n" "\n" " - システムファイルのバックアップ:\n" " \n" "\tこのオプションは、設定ファイルが保存されている\n" "\t /etc ディレクトリをバックアップします。復元時には\n" "\t以下のファイルを上書きしないように注意してください:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - ユーザファイルのバックアップ: \n" "\n" "\tこのオプションは、バックアップしたいユーザを選びます。\n" "\tディスク節約のため、ウェブブラウザのキャッシュは含めない\n" "\tようにしましょう。\n" "\n" " - その他ファイルをバックアップ: \n" "\n" "\t保存したいデータをさらに追加するオプションです。\n" "\tこれを選ぶと、インクリメンタルバックアップは\n" "\t選べません。\t\t\n" " \n" " - インクリメンタルバックアップ:\n" "\n" "\tこれはバックアップ最強のオプションです。\n" "\t最初のバックアップでは全データがバックアップされ、\n" "\tその後のバックアップでは変更されたものだけが\n" "\t保存されます。\n" "\tそして復元するときには、指定日時のデータが復元\n" "\tできます。\n" "\tこのオプションを選ばないと、古いバックアップは\n" "\t毎回削除されます。 \n" "\n" "\n" #: ../../standalone/drakbackup_.c:4701 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" "復元の説明:\n" " \n" "使われるのは最新データだけです。インクリメンタルバックアップでは\n" "新しいものから順に一つづつ復元しなければならないからです。\n" "\n" "したがって、特定ユーザを復元したくなければ、その人のチェック\n" "ボックスをすべてはずしてください。\n" "\n" "さもないとこの中の一つしかえらべません\n" "\n" " - インクリメンタルバックアップ:\n" "\n" "\tこれはバックアップ最強のオプションです。\n" "\t最初のバックアップでは全データがバックアップされ、\n" "\tその後のバックアップでは変更されたものだけが\n" "\t保存されます。\n" "\tそして復元するときには、指定日時のデータが復元\n" "\tできます。\n" "\tこのオプションを選ばないと、古いバックアップは\n" "\t毎回削除されます。 \n" "\n" "\n" "\n" #: ../../standalone/drakbackup_.c:4727 #, fuzzy msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " #: ../../standalone/drakbackup_.c:4729 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" " updates 2002 MandrakeSoft by Stew Benedict " #: ../../standalone/drakbackup_.c:4732 #, fuzzy msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" "説明:\n" "\n" " Drakbackup はシステムのバックアップに使います。\n" " 設定に応じて、バックアップファイルが選べます: \n" "\t- システムファイル\n" "\t- ユーザファイル\n" "\t- その他ファイル\n" "\tあるいは全システムや、その他システム（ウィンドウズ\n" "\tパーティション）もバックアップできます。\n" "\n" " Drakbackup では、以下のメディアにバックアップができます:\n" "\t- ハードドライブ.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (autoboot, レスキュー、自動インストールも可).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- テープ\n" "\n" " Drakbackup では、他のディレクトリを選んでそこに\n" " システムを復元できます。\n" "\n" " デフォルトではすべてのバックアップは\n" " /var/lib/drakbackup ディレクトリに保存されます。\n" "\n" " 設定ファイル:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "復元のやり方:\n" " \n" " 復元ステップでは DrakBackup はもとのディレクトリを\n" " 削除して、すべてのバックアップファイルが完全かどうか\n" " 確かめます。復元する前に、その時点のシステムをバック\n" " アップしておきましょう。\n" "\n" "\n" #: ../../standalone/drakbackup_.c:4769 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" "オプション説明:\n" "\n" "ftp バックアップを使うときは注意しましょう。サーバに送られる\n" "のは構築済みのバックアップだけです。したがって、サーバに送る\n" "前に、まずハードドライブ上にバックアップ構築が必要になります。\n" "\n" #: ../../standalone/drakbackup_.c:4778 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" "\n" "バックアップ復元の問題:\n" "\n" "復元ステップ中に、Drakbackup は復元に先立ってすべての\n" "バックアップファイルをチェックします。\n" "復元を始める前に、Drakbackup は今のディレクトリを削除\n" "するので、いまのデータは全部消えます。ですから、バック\n" "アップデータのファイルは手で改変しないほうが賢明です。\n" #: ../../standalone/drakboot_.c:50 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "%s のインストールに失敗しました。以下のエラーが発生:" #: ../../standalone/drakbug_.c:45 msgid "Mandrake Bug Report Tool" msgstr "Mandrake バグ報告ツール" #: ../../standalone/drakbug_.c:50 msgid "First Time Wizard" msgstr "First Time Wizard" #: ../../standalone/drakbug_.c:51 msgid "Synchronization tool" msgstr "同期ツール" #: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66 #: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135 #: ../../standalone/drakbug_.c:139 msgid "Standalone Tools" msgstr "独立ツール" #: ../../standalone/drakbug_.c:53 msgid "HardDrake" msgstr "HardDrake" #: ../../standalone/drakbug_.c:54 msgid "Mandrake Online" msgstr "Mandrake オンライン" #: ../../standalone/drakbug_.c:55 msgid "Menudrake" msgstr "Menudrake" #: ../../standalone/drakbug_.c:56 msgid "Msec" msgstr "Msec" #: ../../standalone/drakbug_.c:57 msgid "Remote Control" msgstr "リモートコントロール" #: ../../standalone/drakbug_.c:58 msgid "Software Manager" msgstr "ソフトウェアマネージャ" #: ../../standalone/drakbug_.c:59 msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbug_.c:60 msgid "Windows Migration tool" msgstr "ウィンドウズ移行ツール" #: ../../standalone/drakbug_.c:61 msgid "Userdrake" msgstr "Userdrake" #: ../../standalone/drakbug_.c:62 msgid "Configuration Wizards" msgstr "設定ウィザード" #: ../../standalone/drakbug_.c:75 msgid "Application:" msgstr "アプリケーション: " #: ../../standalone/drakbug_.c:76 msgid "Package: " msgstr "パッケージ: " #: ../../standalone/drakbug_.c:77 msgid "Kernel:" msgstr "カーネル: " #: ../../standalone/drakbug_.c:78 msgid "Release: " msgstr "リリース: " #: ../../standalone/drakbug_.c:93 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" "\n" "\n" "バグ報告の提出には、「報告」ボタンをクリックしてください。\n" "するとwebブラウザが開いて https://drakbug.mandrakesoft.com が出ます。\n" "そこに報告書があるので、記入してください。上記の情報はそのサーバ\n" "に転送されます\n" "\n" #: ../../standalone/drakbug_.c:112 msgid "Report" msgstr "報告" #: ../../standalone/drakbug_.c:148 msgid "Not installed" msgstr "インストールされていません" #: ../../standalone/drakbug_.c:160 #, fuzzy msgid "Package not installed" msgstr "インストールされていません" #: ../../standalone/drakbug_.c:173 msgid "connecting to Bugzilla wizard ..." msgstr "Bugzillaウィザードに接続中..." #: ../../standalone/drakbug_.c:180 msgid "No browser available! Please install one" msgstr "ブラウザがありません！　何かインストールしてください" #: ../../standalone/drakconnect_.c:75 #, c-format msgid "Network configuration (%d adapters)" msgstr "ネットワーク設定 (%d アダプタ)" #: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591 msgid "Profile: " msgstr "プロフィール: " #: ../../standalone/drakconnect_.c:91 msgid "Del profile..." msgstr "プロフィール削除……" #: ../../standalone/drakconnect_.c:97 msgid "Profile to delete:" msgstr "削除したいプロフィール：" #: ../../standalone/drakconnect_.c:125 msgid "New profile..." msgstr "新規プロフィール……" #: ../../standalone/drakconnect_.c:131 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "作成するプロフィールの名前（新プロファイルは現在のもののコピーです）：" #: ../../standalone/drakconnect_.c:157 msgid "Hostname: " msgstr "ホスト名:" #: ../../standalone/drakconnect_.c:164 msgid "Internet access" msgstr "インターネット" #: ../../standalone/drakconnect_.c:177 msgid "Type:" msgstr "タイプ: " #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Gateway:" msgstr "ゲートウェイ:" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Interface:" msgstr "インターフェース:" #: ../../standalone/drakconnect_.c:191 msgid "Status:" msgstr "ステータス: " #: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145 msgid "Wait please" msgstr "少々お待ちを" #: ../../standalone/drakconnect_.c:216 msgid "Configure Internet Access..." msgstr "インターネットアクセスの設定" #: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445 msgid "LAN configuration" msgstr "LANの設定" #: ../../standalone/drakconnect_.c:228 msgid "Driver" msgstr "ドライバ" #: ../../standalone/drakconnect_.c:228 msgid "Interface" msgstr "インターフェース" #: ../../standalone/drakconnect_.c:228 msgid "Protocol" msgstr "プロトコル" #: ../../standalone/drakconnect_.c:228 msgid "State" msgstr "状態" #: ../../standalone/drakconnect_.c:240 msgid "Configure Local Area Network..." msgstr "LAN 設定……" #: ../../standalone/drakconnect_.c:252 msgid "Click here to launch the wizard ->" msgstr "ウィザードの起動にはこちらをクリック -->" #: ../../standalone/drakconnect_.c:253 msgid "Wizard..." msgstr "ウィザード..." #: ../../standalone/drakconnect_.c:279 msgid "Apply" msgstr "適用" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Connected" msgstr "接続完了" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Not connected" msgstr "接続されていません" #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Connect..." msgstr "接続……" #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Disconnect..." msgstr "接続を切断……" #: ../../standalone/drakconnect_.c:400 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "警告、別のインターネット接続が検出されました。ネットワークは使用中かもしれま" "せん" #: ../../standalone/drakconnect_.c:427 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "設定済みのインターフェースがありません。\n" "「設定」をクリックしてまずそれらを設定してください。" #: ../../standalone/drakconnect_.c:449 msgid "LAN Configuration" msgstr "LANの設定" #: ../../standalone/drakconnect_.c:460 #, c-format msgid "Adapter %s: %s" msgstr "アダプタ %s: %s" #: ../../standalone/drakconnect_.c:466 msgid "Boot Protocol" msgstr "ブートプロトコル" #: ../../standalone/drakconnect_.c:467 msgid "Started on boot" msgstr "起動時に開始" #: ../../standalone/drakconnect_.c:468 msgid "DHCP client" msgstr "DHCP クライアント" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "activate now" msgstr "いますぐ有効に" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "deactivate now" msgstr "いますぐ無効に" #: ../../standalone/drakconnect_.c:499 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "このインターフェースはまだ設定されていません。\n" "主ウィンドウで設定ウィザードを起動してください" #: ../../standalone/drakconnect_.c:556 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "インターネット接続がありません。\n" "「設定」をクリックして作成してください" #: ../../standalone/drakconnect_.c:580 msgid "Internet connection configuration" msgstr "インターネット接続設定" #: ../../standalone/drakconnect_.c:584 msgid "Internet Connection Configuration" msgstr "インターネット接続設定" #: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94 msgid "Connection type: " msgstr "接続の種類: " #: ../../standalone/drakconnect_.c:599 msgid "Parameters" msgstr "パラメータ" #: ../../standalone/drakconnect_.c:618 msgid "Gateway" msgstr "ゲートウェイ" #: ../../standalone/drakconnect_.c:627 msgid "Ethernet Card" msgstr "イーサネットカード" #: ../../standalone/drakconnect_.c:628 msgid "DHCP Client" msgstr "DHCP クライアント" #: ../../standalone/drakfloppy_.c:39 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "" "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,-misc-fixed-medium-r-normal--14-*-" "75-75-c-*-jisx0208.1983-0,*" #: ../../standalone/drakfloppy_.c:40 msgid "Module name" msgstr "モジュール名" #: ../../standalone/drakfloppy_.c:40 msgid "Size" msgstr "サイズ" #: ../../standalone/drakfloppy_.c:45 msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy_.c:63 msgid "boot disk creation" msgstr "ブートディスク作成" #: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84 msgid "default" msgstr "デフォルト" #: ../../standalone/drakfloppy_.c:87 #, c-format msgid "DrakFloppy Error: %s" msgstr "DrakFloppyエラー： %s" #: ../../standalone/drakfloppy_.c:98 msgid "kernel version" msgstr "カーネルバージョン" #: ../../standalone/drakfloppy_.c:104 msgid "General" msgstr "一般" #: ../../standalone/drakfloppy_.c:109 msgid "Expert Area" msgstr "エキスパート向け" #: ../../standalone/drakfloppy_.c:112 msgid "mkinitrd optional arguments" msgstr "mkinitrd 追加の引数" #: ../../standalone/drakfloppy_.c:113 msgid "Add a module" msgstr "モジュール追加" #: ../../standalone/drakfloppy_.c:133 msgid "force" msgstr "強制" #: ../../standalone/drakfloppy_.c:134 msgid "if needed" msgstr "必要な場合のみ" #: ../../standalone/drakfloppy_.c:135 msgid "omit scsi modules" msgstr "scsi モジュールは飛ばす" #: ../../standalone/drakfloppy_.c:136 msgid "omit raid modules" msgstr "raid モジュールは飛ばす" #: ../../standalone/drakfloppy_.c:172 msgid "Remove a module" msgstr "モジュールの削除" #: ../../standalone/drakfloppy_.c:194 msgid "Output" msgstr "出力" #: ../../standalone/drakfloppy_.c:206 msgid "Build the disk" msgstr "ディスクを作成" #: ../../standalone/drakfloppy_.c:336 #, c-format msgid "Be sure a media is present for the device %s" msgstr "デバイス %s にメディアは入っていますか？" # ../../standalone/drakfloppy_.c:426, c-format #: ../../standalone/drakfloppy_.c:341 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "デバイス %sのメディアがないか書き込み禁止です。\n" "セットしてください。" #: ../../standalone/drakfloppy_.c:344 #, c-format msgid "Unable to fork: %s" msgstr "%s をフォークできません" #: ../../standalone/drakfloppy_.c:349 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "以下のmkbootdiskをきちんと閉じられません: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:213 msgid "Search installed fonts" msgstr "インストール済みフォントを検索" #: ../../standalone/drakfont_.c:215 msgid "Unselect fonts installed" msgstr "インストール済みフォントを選択しない" #: ../../standalone/drakfont_.c:239 msgid "parse all fonts" msgstr "すべてのフォントをチェック" #: ../../standalone/drakfont_.c:242 msgid "no fonts found" msgstr "フォントが見つかりません" #: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305 #: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454 #: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493 #: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532 msgid "done" msgstr "完了" #: ../../standalone/drakfont_.c:257 msgid "could not find any font in your mounted partitions" msgstr "マウントされたパーティションにはフォントが見つかりません" #: ../../standalone/drakfont_.c:303 msgid "Reselect correct fonts" msgstr "正しいフォントを選び直す" #: ../../standalone/drakfont_.c:307 msgid "could not find any font.\n" msgstr "フォントが見つかりません。\n" #: ../../standalone/drakfont_.c:331 msgid "Search fonts in installed list" msgstr "インストール済み一覧からフォントを探す" #: ../../standalone/drakfont_.c:359 msgid "Fonts copy" msgstr "フォントをコピー" #: ../../standalone/drakfont_.c:363 msgid "True Type fonts installation" msgstr "True Type フォントのインストール" #: ../../standalone/drakfont_.c:371 msgid "please wait during ttmkfdir..." msgstr "ttmkfdir 中なので少々お待ちを..." #: ../../standalone/drakfont_.c:377 msgid "True Type install done" msgstr "True Type インストール完了" #: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413 msgid "Fonts conversion" msgstr "フォント変換" #: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417 #: ../../standalone/drakfont_.c:450 msgid "type1inst building" msgstr "type1inst 構築中" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427 msgid "Ghostscript referencing" msgstr "Ghostscript 参照中" #: ../../standalone/drakfont_.c:437 msgid "ttf fonts conversion" msgstr "ttf フォント変換" #: ../../standalone/drakfont_.c:444 msgid "pfm fonts conversion" msgstr "pfm フォント変換" #: ../../standalone/drakfont_.c:456 msgid "Suppress temporary Files" msgstr "一時ファイルを作らない" #: ../../standalone/drakfont_.c:459 msgid "Restart XFS" msgstr "XFS 再起動" #: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526 msgid "Suppress Fonts Files" msgstr "フォントファイルを作らない" #: ../../standalone/drakfont_.c:528 msgid "xfs restart" msgstr "xfs 再起動" #: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" "フォントインストールに先立って、それらのフォントを使う権利やインストールする" "権利があることを確認してください。\n" "\n" "-フォントを通常のやり方でインストールできます。ときどき、おかしなフォントで " "X サーバがハングする場合があります。" #: ../../standalone/drakfont_.c:621 msgid "Fonts Importation" msgstr "フォント読み込み" #: ../../standalone/drakfont_.c:650 msgid "Get Windows Fonts" msgstr "ウィンドウズのフォントを取ってくる" #: ../../standalone/drakfont_.c:658 msgid "Uninstall Fonts" msgstr "フォントのアンインストール" #: ../../standalone/drakfont_.c:669 msgid "Advanced Options" msgstr "上級オプション" #: ../../standalone/drakfont_.c:677 msgid "Font List" msgstr "フォント一覧" #: ../../standalone/drakfont_.c:737 #, fuzzy msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "\n" "\n" msgstr "" " このプログラムはフリーソフトウェアです。Free Software Foundationの\n" " 発行する GNU 一般共有ライセンスのバージョン2以降の条件に従って\n" " 再配布・改変ができます。\n" "\n" " このプログラムは、役に立つべく配布されてはいますが、\n" " まったくの無保証です。商業性や、ある目的への適合性について\n" " 明示的、暗示的を問わず一切の保証を行いません。詳細は\n" " GNU 一般共有ライセンスを参照してください。\n" "\n" " GNU 一般共有ライセンスがこのプログラムには付属してきたはず\n" " です。付属していない場合には、以下に連絡して入手してください：\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, \n" " Boston, MA 02111-1307, USA." #: ../../standalone/drakfont_.c:793 msgid "" "drakfont Future Overview\n" " - Fonts import:\n" " pfb ( Adobe Type 1 binary )\n" " pfa ( Adobe Type 1 ASCII )\n" " ttf ( True-Type )\n" " pcf.gz\n" " Speedo\n" " and Bitmap (PCF, BDF, and SNF)\n" " - Features\n" " - Install fonts from any directory\n" " - Get windows fonts on any vfat partitions\n" " - Get fonts on any partitions.\n" " - UN-installation of any fonts (even if not installed " "through drakfont)\n" " - Support\n" " - Xfs\n" " - ghostscript & printer\n" " - Staroffice & printer\n" " - abiword\n" "\t - netscape\n" " - Koffice, Gnumeric, ... studying\n" " - all fonts supported by printer\n" " - anti-aliases by RENDER in Xfree86 .... \n" "\t\t\t\tsupported by KDE.\n" "\t\t\t\twill be supported by gnome 1.2.\n" "Visual Interface:\n" " Window interface:\n" " - Fontselectiondialog widget\n" " - Command buttons under Fontselectiondialog (like the actual " "frontend).\n" " Commands buttons:\n" " - import from windows partition.\n" " import from all fat32 partitions and look for winnt/windows/" "font\n" " and import all (delete doublon) but don't import if already " "exist.\n" " - import from directory\n" " look for if it exist before for each font and not delete the " "original.\n" " (replace all, no, none)\n" " expert options:\n" " ask the directory, and look for if it exist before\n" " if it exist ask: (replace all, no, none)\n" " - uninstall with list per font type\n" " Expert additional switch\n" " - option support: ghostscript, Staroffice, etc...\n" " check-button. (by default all check)\n" " - Printer Application Fonts Support...\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:862 msgid "Choose the applications that will support the fonts:" msgstr "このフォントをサポートするアプリケーションを選んでください:" #: ../../standalone/drakfont_.c:870 msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakfont_.c:877 msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakfont_.c:884 msgid "Abiword" msgstr "Abiword" #: ../../standalone/drakfont_.c:891 msgid "Generic Printers" msgstr "一般プリンタ" #: ../../standalone/drakfont_.c:958 msgid "Select the font file or directory and click on 'Add'" msgstr "フォントファイルかディレクトリを選んで「追加」をクリック" #: ../../standalone/drakfont_.c:1005 msgid "Install List" msgstr "一覧のインストール" #: ../../standalone/drakfont_.c:1048 msgid "click here if you are sure." msgstr "まちがいなければクリックしてください" #: ../../standalone/drakfont_.c:1055 msgid "here if no." msgstr "ダメならこちらを" #: ../../standalone/drakfont_.c:1112 msgid "Unselected All" msgstr "すべてを非選択に" #: ../../standalone/drakfont_.c:1116 msgid "Selected All" msgstr "すべてを選択" #: ../../standalone/drakfont_.c:1120 msgid "Remove List" msgstr "一覧を削除" #: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175 msgid "Initials tests" msgstr "イニシャルテスト" #: ../../standalone/drakfont_.c:1145 msgid "Copy fonts on your system" msgstr "システム上のフォントをコピー" #: ../../standalone/drakfont_.c:1149 msgid "Install & convert Fonts" msgstr "フォントのインストールと変換" #: ../../standalone/drakfont_.c:1153 msgid "Post Install" msgstr "インストール後の作業" #: ../../standalone/drakfont_.c:1178 msgid "Remove fonts on your system" msgstr "システムからフォントを削除" #: ../../standalone/drakfont_.c:1182 msgid "Post Uninstall" msgstr "アンインストール後の作業" #: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182 msgid "Internet Connection Sharing" msgstr "インターネット接続の共有" #: ../../standalone/drakgw_.c:114 msgid "Sorry, we support only 2.4 kernels." msgstr "すみませんが、2.4カーネルしかサポートしません。" #: ../../standalone/drakgw_.c:125 msgid "Internet Connection Sharing currently enabled" msgstr "インターネット接続共有は現在有効" #: ../../standalone/drakgw_.c:126 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "インターネット接続共有のセットアップはすでに完了。\n" "有効になっています。\n" "\n" "どうしますか？" #: ../../standalone/drakgw_.c:130 msgid "disable" msgstr "無効に" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "dismiss" msgstr "無視" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "reconfigure" msgstr "再設定" #: ../../standalone/drakgw_.c:133 msgid "Disabling servers..." msgstr "サーバを無効にしています……" #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "インターネット接続共有は無効になりました。" #: ../../standalone/drakgw_.c:149 msgid "Internet Connection Sharing currently disabled" msgstr "インターネット接続共有は現在無効です" #: ../../standalone/drakgw_.c:150 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "インターネット接続共有のセットアップはすでに完了。\n" "無効になっています。\n" "\n" "どうしますか？" #: ../../standalone/drakgw_.c:154 msgid "enable" msgstr "有効に" #: ../../standalone/drakgw_.c:161 msgid "Enabling servers..." msgstr "サーバを有効にしています……" #: ../../standalone/drakgw_.c:166 msgid "Internet connection sharing is now enabled." msgstr "インターネット接続共有が有効です。" #: ../../standalone/drakgw_.c:183 #, fuzzy msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "このマシンのインターネット接続を共有するように設定します。\n" "この機能があると、ローカルネットワーク上の他のコンピュータが、\n" "このコンピュータのインターネット接続を使えます。\n" "注：ローカルエリアネットワーク (LAN) をつくるには、専用のネットワークアダプタ" "が要ります。" #: ../../standalone/drakgw_.c:211 #, c-format msgid "Interface %s (using module %s)" msgstr "インターフェース %s (モジュール %s を使用)" #: ../../standalone/drakgw_.c:212 #, c-format msgid "Interface %s" msgstr "インターフェース %s" #: ../../standalone/drakgw_.c:220 msgid "No network adapter on your system!" msgstr "ネットワークアダプタがありません！" #: ../../standalone/drakgw_.c:221 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "システム上にイーサネットアダプタが見つかりません。 ハードウェア設定ツールを実" "行してください。" #: ../../standalone/drakgw_.c:227 msgid "Network interface" msgstr "ネットワークインターフェイス" #: ../../standalone/drakgw_.c:228 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "システムには設定されたネットワークアダプタがひとつしかありません：\n" "\n" "%s\n" "\n" "このアダプタで LAN に接続しますね。" #: ../../standalone/drakgw_.c:235 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "ローカルエリアネットワークにつながるネットワークアダプタを\n" "選んでください。" #: ../../standalone/drakgw_.c:261 msgid "Network interface already configured" msgstr "ネットワークインターフェースは設定済みです設定されてません" #: ../../standalone/drakgw_.c:262 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "警告、ネットワークアダプタ (%s) は設定済みです。\n" "\n" "自動再設定をしますか？\n" "\n" "手動でやることもできますが、それなりの知識が必要ですよ。" #: ../../standalone/drakgw_.c:267 msgid "Automatic reconfiguration" msgstr "自動再設定" #: ../../standalone/drakgw_.c:267 msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw_.c:268 msgid "Show current interface configuration" msgstr "現在のインターフェース設定を表示" #: ../../standalone/drakgw_.c:269 #, fuzzy msgid "Current interface configuration" msgstr "現在のインターフェース設定を表示" #: ../../standalone/drakgw_.c:270 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "C「%s」の現状の設定:\n" "\n" "ネットワーク: %s\n" "IP アドレス: %s\n" "IP 属性: %s\n" "ドライバ: %s" #: ../../standalone/drakgw_.c:283 #, fuzzy msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" "現状の設定を維持して、すでに DHCP サーバを設置したものと想定することもできま" "す。その場合には、ローカルネットワークのCクラスアドレスを正しく読んでいるか確" "認してください。自動設定はしませんし、DHCP サーバの設定も変えませんので。\n" "\n" "あるいは、こちらでインターフェースとDHCPサーバの設定をやることもできます。\n" "\n" #: ../../standalone/drakgw_.c:290 #, fuzzy msgid "Local Network adress" msgstr "Cクラスローカルネットワーク" #: ../../standalone/drakgw_.c:294 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:300 msgid "(This) DHCP Server IP" msgstr "（この）DHCP サーバの IP" #: ../../standalone/drakgw_.c:301 #, fuzzy msgid "The DNS Server IP" msgstr "（この）DHCP サーバの IP" #: ../../standalone/drakgw_.c:302 #, fuzzy msgid "The internal domain name" msgstr "新しいプリンタの名前" #: ../../standalone/drakgw_.c:303 msgid "The DHCP start range" msgstr "" #: ../../standalone/drakgw_.c:304 msgid "The DHCP end range" msgstr "" #: ../../standalone/drakgw_.c:305 msgid "The default lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:306 msgid "The maximum lease (in seconds)" msgstr "" #: ../../standalone/drakgw_.c:307 msgid "Re-configure interface and DHCP server" msgstr "インターフェースとDHCPサーバの再設定" #: ../../standalone/drakgw_.c:314 msgid "The Local Network did not finish with `.0', bailing out." msgstr "ローカルネットワークが「.0」で終わっていません。中断します。" #: ../../standalone/drakgw_.c:325 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "現在の %s の設定ではLANアドレスが衝突するかもしれません！\n" #: ../../standalone/drakgw_.c:335 msgid "Configuring..." msgstr "設定中..." #: ../../standalone/drakgw_.c:336 msgid "Configuring scripts, installing software, starting servers..." msgstr "スクリプトの設定、ソフトウェアのインストール、サーバの起動..." #: ../../standalone/drakgw_.c:372 #, c-format msgid "Problems installing package %s" msgstr "パッケージ %s のインストールで問題発生" #: ../../standalone/drakgw_.c:505 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "設定がすべて終わりました。\n" "これで自動ネットワーク設定（dhcp) を使って、LAN 上の他のマシンとインターネッ" "ト接続を共有できます。" #: ../../standalone/drakgw_.c:523 msgid "The setup has already been done, but it's currently disabled." msgstr "設定はすんでいますが、いまは無効になっています。" #: ../../standalone/drakgw_.c:524 msgid "The setup has already been done, and it's currently enabled." msgstr "設定はすんでいて、いまは有効になっています。" #: ../../standalone/drakgw_.c:525 msgid "No Internet Connection Sharing has ever been configured." msgstr "インターネット接続共有はまったく設定されていません。" #: ../../standalone/drakgw_.c:531 msgid "Internet connection sharing configuration" msgstr "インターネット接続の設定" #: ../../standalone/drakgw_.c:539 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "インターネット接続共有ユーティリティへようこそ！\n" "\n" "%s\n" "\n" "設定ウィザードを起動するには「設定」をクリックしましょう。" #: ../../standalone/drakperm_.c:36 msgid "group" msgstr "グループ" #: ../../standalone/drakperm_.c:36 msgid "path" msgstr "パス" #: ../../standalone/drakperm_.c:36 msgid "permissions" msgstr "パーミッション" #: ../../standalone/drakperm_.c:36 msgid "user" msgstr "ユーザ" #: ../../standalone/drakperm_.c:43 msgid "Up" msgstr "上" #: ../../standalone/drakperm_.c:44 msgid "delete" msgstr "削除" #: ../../standalone/drakperm_.c:45 msgid "edit" msgstr "編集" #: ../../standalone/drakperm_.c:46 msgid "Down" msgstr "下" #: ../../standalone/drakperm_.c:47 msgid "add a rule" msgstr "ルール追加" #: ../../standalone/drakperm_.c:48 msgid "select perm file to see/edit" msgstr "閲覧/編集するpermファイルを選択" #: ../../standalone/drakperm_.c:51 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Drakperm は、パーミッションや所有者、グループを msecでいじるためのもので" "す。\n" "またデフォルトを消して自分のルールを編集することもできます。" #: ../../standalone/drakperm_.c:56 msgid "Add a new rule at the end" msgstr "新しいルールを追加" #: ../../standalone/drakperm_.c:57 msgid "Edit curent rule" msgstr "現在のルールを編集" #: ../../standalone/drakperm_.c:58 msgid "Up selected rule one level" msgstr "選んだルールを一段上げる" #: ../../standalone/drakperm_.c:59 msgid "Down selected rule one level" msgstr "選んだルールを一段下げる" #: ../../standalone/drakperm_.c:60 msgid "Delete selected rule" msgstr "選んだルールを削除" #: ../../standalone/drakperm_.c:224 msgid "browse" msgstr "ブラウズ" #: ../../standalone/drakperm_.c:231 msgid "Current user" msgstr "現在のユーザ" #: ../../standalone/drakperm_.c:236 msgid "Permissions" msgstr "パーミッション" #: ../../standalone/drakperm_.c:237 msgid "Path" msgstr "パス" #: ../../standalone/drakperm_.c:238 msgid "Property" msgstr "プロパティ" #: ../../standalone/drakperm_.c:240 msgid "sticky-bit" msgstr "sticky-bit" #: ../../standalone/drakperm_.c:241 msgid "Set-UID" msgstr "UID設定" #: ../../standalone/drakperm_.c:242 msgid "Set-GID" msgstr "GID設定" #: ../../standalone/drakperm_.c:296 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "ディレクトリ用:\n" " ディレクトリや、その中のファイルの所有者だけが削除できます" #: ../../standalone/drakperm_.c:297 msgid "Use owner id for execution" msgstr "実行に所有者idを使う" #: ../../standalone/drakperm_.c:298 msgid "Use group id for execution" msgstr "実行にグループidを使う" #: ../../standalone/drakperm_.c:299 msgid "when checked, owner and group won't be changed" msgstr "チェックすると、所有者やグループは変更されません" #: ../../standalone/drakperm_.c:304 msgid "Path selection" msgstr "パス選択" #: ../../standalone/drakperm_.c:350 msgid "user :" msgstr "ユーザ: " #: ../../standalone/drakperm_.c:352 msgid "group :" msgstr "グループ: " #: ../../standalone/draksound_.c:46 msgid "No Sound Card detected!" msgstr "サウンドカードが検出されませんでした!" #: ../../standalone/draksound_.c:47 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "サウンドカードが検出できませんでした。Linuxでサポートされているきちんと差し込" "まれているか確認してください。\n" "\n" "\n" "弊社のハードウェアデータベースも参照してください:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/draksound_.c:54 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../standalone/draksplash_.c:21 #, fuzzy msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "正しく機能するには ImageMagickパッケージが必要です" #: ../../standalone/draksplash_.c:67 msgid "first step creation" msgstr "first step作成" #: ../../standalone/draksplash_.c:70 msgid "final resolution" msgstr "最終解像度" #: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163 msgid "choose image file" msgstr "画像ファイルを選択" #: ../../standalone/draksplash_.c:72 msgid "Theme name" msgstr "テーマ名" #: ../../standalone/draksplash_.c:77 msgid "Browse" msgstr "ブラウズ" #: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153 msgid "Configure bootsplash picture" msgstr "起動スプラッシュ画像の設定" #: ../../standalone/draksplash_.c:90 msgid "" "x coordinate of text box\n" "in number of character" msgstr "テキストボックスのx座標を文字数で" #: ../../standalone/draksplash_.c:91 msgid "" "y coordinate of text box\n" "in number of character" msgstr "テキストボックスのy座標を文字数で" #: ../../standalone/draksplash_.c:92 msgid "text width" msgstr "テキストの幅" #: ../../standalone/draksplash_.c:93 msgid "text box height" msgstr "テキストボックスの高さ" #: ../../standalone/draksplash_.c:94 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "プログレスバー左上角のx座標" #: ../../standalone/draksplash_.c:95 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "プログレスバー左上角のy座標" #: ../../standalone/draksplash_.c:96 msgid "the width of the progress bar" msgstr "プログレスバーの幅" #: ../../standalone/draksplash_.c:97 msgid "the heigth of the progress bar" msgstr "プログレスバーの高さ" #: ../../standalone/draksplash_.c:98 msgid "the color of the progress bar" msgstr "プログレスバーの色" #: ../../standalone/draksplash_.c:113 msgid "Preview" msgstr "プレビュー" #: ../../standalone/draksplash_.c:115 msgid "Save theme" msgstr "テーマ保存" #: ../../standalone/draksplash_.c:116 msgid "Choose color" msgstr "色を選んで下さい" #: ../../standalone/draksplash_.c:119 msgid "Display logo on Console" msgstr "コンソールにロゴ表示" #: ../../standalone/draksplash_.c:120 msgid "Make kernel message quiet by default" msgstr "カーネルメッセージをデフォルトでは控えめに" #: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "このテーマはまだ起動スプラッシュが%sにありません!" #: ../../standalone/draksplash_.c:205 msgid "saving Bootsplash theme..." msgstr "起動スプラッシュテーマを保存中..." #: ../../standalone/draksplash_.c:428 msgid "ProgressBar color selection" msgstr "プログレスバーの色を選ぶ" #: ../../standalone/draksplash_.c:449 msgid "You must choose an image file first!" msgstr "まず画像ファイルを選んでください!" #: ../../standalone/draksplash_.c:458 msgid "Generating preview ..." msgstr "プレビュー生成中..." #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:506 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakxtv_.c:46 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" "XawTV がインストールされていません!\n" "\n" "\n" "TV カードがあるのに DrakX が検出せず (\"/etc/modules\"にbttv も saa7134\n" "モジュールもない) xawtvもインストールされなければ、\n" "\"lspcidrake -v -f\" の結果を \"install\\@mandrakesoft.com\"\n" "にsubject \"undetected TV card\"でメールしてください。\n" "\n" "\n" "インストールにはrootになってコンソールで \"urpmi xawtv\" とタイプします。" #: ../../standalone/drakxtv_.c:63 msgid "Canada (cable)" msgstr "カナダ（ケーブル）" #: ../../standalone/drakxtv_.c:63 msgid "USA (broadcast)" msgstr "USA (放送)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable)" msgstr "USA (ケーブル)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable-hrc)" msgstr "USA (ケーブル-hrc)" #: ../../standalone/drakxtv_.c:64 msgid "China (broadcast)" msgstr "中国 (放送)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (broadcast)" msgstr "日本 (放送)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (cable)" msgstr "日本 (ケーブル)" #: ../../standalone/drakxtv_.c:65 msgid "East Europe" msgstr "東ヨーロッパ" #: ../../standalone/drakxtv_.c:65 msgid "France [SECAM]" msgstr "フランス [SECAM]" #: ../../standalone/drakxtv_.c:65 msgid "Ireland" msgstr "アイルランド" #: ../../standalone/drakxtv_.c:65 msgid "West Europe" msgstr "西ヨーロッパ" #: ../../standalone/drakxtv_.c:66 msgid "Australia" msgstr "オーストラリア" #: ../../standalone/drakxtv_.c:66 msgid "Newzealand" msgstr "ニュージーランド" #: ../../standalone/drakxtv_.c:67 msgid "South Africa" msgstr "南アフリカ" #: ../../standalone/drakxtv_.c:68 msgid "Argentina" msgstr "アルゼンチン" #: ../../standalone/drakxtv_.c:69 msgid "Australian Optus cable TV" msgstr "オーストラリアOptusケーブルテレビ" #: ../../standalone/drakxtv_.c:102 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "では\n" "テレビ方式と国を入力してください" #: ../../standalone/drakxtv_.c:104 msgid "TV norm:" msgstr "テレビ方式：" #: ../../standalone/drakxtv_.c:105 msgid "Area:" msgstr "地域：" #: ../../standalone/drakxtv_.c:109 msgid "Scanning for TV channels in progress ..." msgstr "テレビチャンネルを探しています..." #: ../../standalone/drakxtv_.c:116 msgid "Scanning for TV channels" msgstr "テレビチャンネルを探しています" #: ../../standalone/drakxtv_.c:120 msgid "There was an error while scanning for TV channels" msgstr "テレビチャンネルの走査中にエラーが発生" #: ../../standalone/drakxtv_.c:121 msgid "XawTV isn't installed!" msgstr "XawTVがインストールされていません" #: ../../standalone/drakxtv_.c:124 msgid "Have a nice day!" msgstr "お元気で！" #: ../../standalone/drakxtv_.c:125 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "これでxawtvをXウィンドウ上で使えます！\n" #: ../../standalone/drakxtv_.c:147 msgid "No TV Card detected!" msgstr "テレビカードが見つかりません" #: ../../standalone/drakxtv_.c:148 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "TV カードが検出されませんでした。LinuxでサポートされたビデオTVカードがきちん" "と挿入されているか確かめましょう。\n" "\n" "\n" "弊社のハードウェアデータベースも参照してください:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/harddrake2_.c:17 msgid "Alternative drivers" msgstr "代替ドライバ" #: ../../standalone/harddrake2_.c:18 msgid "the list of alternative drivers for this sound card" msgstr "このサウンドカード用代替ドライバ一覧" #: ../../standalone/harddrake2_.c:20 msgid "Bus" msgstr "バス" #: ../../standalone/harddrake2_.c:21 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "デバイスの接続された物理バスを選びます（PCI、USBなど)" #: ../../standalone/harddrake2_.c:22 msgid "Channel" msgstr "チャンネル" #: ../../standalone/harddrake2_.c:22 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI チャンネル" #: ../../standalone/harddrake2_.c:23 msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2_.c:23 msgid "" "The GNU/Linux kernel needs to do run a calculation loop at boot time\n" "\t to initialize a timer counter. Its result is stored as bogomips as a way " "to \"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2_.c:26 msgid "Bus identification" msgstr "バスの同定" #: ../../standalone/harddrake2_.c:27 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "" "- PCI と USB デバイス：ベンダー、デバイス、サブベンダー、サブデバイスのPCI/" "USB idを記述します。" #: ../../standalone/harddrake2_.c:29 msgid "Location on the bus" msgstr "バス上の位置" #: ../../standalone/harddrake2_.c:30 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- pci デバイス: このカードのPCIスロット、デバイスと機能\n" "- eide デバイス: スレーブかマスターのデバイス\n" "- scsi デバイス: scsi バスとscsi デバイスのid" #: ../../standalone/harddrake2_.c:33 #, fuzzy msgid "Cache size" msgstr "チャンクサイズ" #: ../../standalone/harddrake2_.c:33 msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Coma bug:" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Does this cpu has Cyrix 6x86 Coma bug ?" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2_.c:36 #, fuzzy msgid "Cpuid level" msgstr "セキュリティ水準" #: ../../standalone/harddrake2_.c:36 msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "" "The cpu frequency in Mhz (Mega herz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2_.c:38 #, fuzzy msgid "This field describes the device" msgstr "このフィールドはデバイスの説明です" #: ../../standalone/harddrake2_.c:39 msgid "Old device file" msgstr "古いデバイスファイル" #: ../../standalone/harddrake2_.c:40 msgid "old static device name used in dev package" msgstr "devパッケージで使われた古い静的デバイス名" #: ../../standalone/harddrake2_.c:41 msgid "New devfs device" msgstr "新しいdevfsデバイス" #: ../../standalone/harddrake2_.c:42 msgid "new dinamic device name generated by incore kernel devfs" msgstr "incoreカーネルdevfsの生成した新しい動的デバイス名" #: ../../standalone/harddrake2_.c:43 msgid "Module" msgstr "モジュール" #: ../../standalone/harddrake2_.c:43 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "そのデバイスを扱うGNU/Linuxカーネルのモジュール" #: ../../standalone/harddrake2_.c:44 msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2_.c:44 msgid "Flags" msgstr "" #: ../../standalone/harddrake2_.c:45 msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2_.c:46 msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the attended precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "Does FPU have an irq vector" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "Early pentium were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2_.c:52 msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2_.c:53 msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2_.c:55 #, fuzzy msgid "Floppy format" msgstr "フォーマット" #: ../../standalone/harddrake2_.c:55 msgid "Format of floppies the drive accept" msgstr "" #: ../../standalone/harddrake2_.c:56 #, fuzzy msgid "Level" msgstr "レベル" #: ../../standalone/harddrake2_.c:56 msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2_.c:57 msgid "Media class" msgstr "メディアクラス" #: ../../standalone/harddrake2_.c:57 msgid "class of hardware device" msgstr "ハードウェアデバイスのクラス" #: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59 msgid "Model" msgstr "モデル" #: ../../standalone/harddrake2_.c:58 msgid "hard disk model" msgstr "ハードディスクのモデル" #: ../../standalone/harddrake2_.c:59 msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Model name" msgstr "モジュール名" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Official vendor name of the cpu" msgstr "デバイスのベンダー名" #: ../../standalone/harddrake2_.c:61 msgid "Number of buttons" msgstr "ボタン数" #: ../../standalone/harddrake2_.c:62 #, fuzzy msgid "Name" msgstr "名前: " #: ../../standalone/harddrake2_.c:63 #, fuzzy msgid "network printer port" msgstr ", ネットワークプリンタ「%s」, ポート %s" #: ../../standalone/harddrake2_.c:64 msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2_.c:64 #, fuzzy msgid "the number of the processor" msgstr "プログレスバーの色" #: ../../standalone/harddrake2_.c:65 #, fuzzy msgid "Model stepping" msgstr "設定の読み込み中" #: ../../standalone/harddrake2_.c:65 msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2_.c:66 #, fuzzy msgid "The type of bus on which the mouse is connected" msgstr "マウスはどのシリアルポートにつながっていますか？" #: ../../standalone/harddrake2_.c:67 msgid "the vendor name of the device" msgstr "デバイスのベンダー名" #: ../../standalone/harddrake2_.c:68 #, fuzzy msgid "the vendor name of the processor" msgstr "デバイスのベンダー名" #: ../../standalone/harddrake2_.c:82 msgid "/_Quit" msgstr "/終了(_Q)" #: ../../standalone/harddrake2_.c:83 #, fuzzy msgid "/Autodetect _printers" msgstr "自動検出されたもの" #: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85 #: ../../standalone/logdrake_.c:81 msgid "/_Options" msgstr "/オプション(_O)" #: ../../standalone/harddrake2_.c:85 #, fuzzy msgid "/Autodetect _modems" msgstr "自動検出されたもの" #: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89 #: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102 #: ../../standalone/logdrake_.c:83 msgid "/_Help" msgstr "/ヘルプ(_H)" #: ../../standalone/harddrake2_.c:89 msgid "/_Help..." msgstr "/ヘルプ(_H)..." #: ../../standalone/harddrake2_.c:92 msgid "Harddrake help" msgstr "Harddrake ヘルプ" #: ../../standalone/harddrake2_.c:93 msgid "" "Description of the fields:\n" "\n" msgstr "" "フィールドの説明:\n" "\n" #: ../../standalone/harddrake2_.c:96 msgid "" "Once you've selected a device, you'll be able to see explanations on fields " "displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2_.c:96 #, fuzzy msgid "Select a device !" msgstr "スキャナを選択して下さい" #: ../../standalone/harddrake2_.c:100 msgid "/_Report Bug" msgstr "/バグ報告(_R)" #: ../../standalone/harddrake2_.c:102 msgid "/_About..." msgstr "/情報(_A)..." #: ../../standalone/harddrake2_.c:104 msgid "About Harddrake" msgstr "Harddrakeについて" #: ../../standalone/harddrake2_.c:105 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" "このソフトはHardDrake, Mandrake のハードウェア設定ツールなり。\n" "バージョン:" #: ../../standalone/harddrake2_.c:106 msgid "Author:" msgstr "作者: " #: ../../standalone/harddrake2_.c:113 msgid "Detection in progress" msgstr "ただいま検出中" #: ../../standalone/harddrake2_.c:119 msgid "Harddrake2 version " msgstr "Harddrake2 バージョン" #: ../../standalone/harddrake2_.c:126 msgid "Detected hardware" msgstr "検出されたハードウェア" #: ../../standalone/harddrake2_.c:129 msgid "Information" msgstr "情報" #: ../../standalone/harddrake2_.c:131 msgid "Configure module" msgstr "モジュール設定" #: ../../standalone/harddrake2_.c:137 msgid "Run config tool" msgstr "設定ツール実行" #: ../../standalone/harddrake2_.c:143 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" を実行中..." #: ../../standalone/harddrake2_.c:159 msgid "" "Click on a device in the left tree in order to get its information displayed " "here." msgstr "" #: ../../standalone/harddrake2_.c:231 msgid "primary" msgstr "一次" #: ../../standalone/harddrake2_.c:231 msgid "secondary" msgstr "二次" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect modems" msgstr "自動検出されたもの" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect printers" msgstr "自動検出されたもの" #: ../../standalone/harddrake2_.c:261 #, fuzzy msgid "/Options" msgstr "/オプション(_O)" #: ../../standalone/keyboarddrake_.c:26 msgid "Please, choose your keyboard layout." msgstr "キーボードレイアウトは何ですか？" #: ../../standalone/keyboarddrake_.c:35 msgid "Do you want the BackSpace to return Delete in console?" msgstr "BackSpaceキーがコンソールで消去をするようにしますか？" #: ../../standalone/livedrake_.c:18 msgid "Change Cd-Rom" msgstr "CD-ROMを入れ替えてください" #: ../../standalone/livedrake_.c:19 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "インストールCD をドライブにいれて、 Ok を押してください。\n" "CDがなければ、Cancel を押してライブアップグレードを回避して下さい。" #: ../../standalone/livedrake_.c:29 msgid "Unable to start live upgrade !!!\n" msgstr "ライブアップグレードを開始できません!!!\n" #: ../../standalone/localedrake_.c:34 msgid "The change is done, but to be effective you must logout" msgstr "変更が完了しましたが、有効にするにはいったんログアウトしてください。" #: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350 msgid "logdrake" msgstr "logdrake" #: ../../standalone/logdrake_.c:68 msgid "Show only for the selected day" msgstr "選んだ日の分だけを表示" #: ../../standalone/logdrake_.c:75 msgid "/File/_New" msgstr "/ファイル(F)/新規(_N)" #: ../../standalone/logdrake_.c:75 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:76 msgid "/File/_Open" msgstr "/ファイル(F)/開く(_O)" #: ../../standalone/logdrake_.c:76 msgid "O" msgstr "O" #: ../../standalone/logdrake_.c:77 msgid "/File/_Save" msgstr "/ファイル(F)/保存(_S)" #: ../../standalone/logdrake_.c:77 msgid "S" msgstr "S" #: ../../standalone/logdrake_.c:78 msgid "/File/Save _As" msgstr "/ファイル(F)/名前をつけて保存(_A)" #: ../../standalone/logdrake_.c:79 msgid "/File/-" msgstr "/ファイル(F)/-" #: ../../standalone/logdrake_.c:82 msgid "/Options/Test" msgstr "/オプション(O)/テスト" #: ../../standalone/logdrake_.c:84 msgid "/Help/_About..." msgstr "/ヘルプ(H)/情報(_A)..." #: ../../standalone/logdrake_.c:145 msgid "User" msgstr "ユーザ名" #: ../../standalone/logdrake_.c:146 msgid "Messages" msgstr "メッセージ" #: ../../standalone/logdrake_.c:147 msgid "Syslog" msgstr "シスログ" #: ../../standalone/logdrake_.c:148 msgid "Mandrake Tools Explanations" msgstr "Mandrake ツールの説明" #: ../../standalone/logdrake_.c:151 msgid "search" msgstr "検索" #: ../../standalone/logdrake_.c:161 msgid "A tool to monitor your logs" msgstr "ログをモニタするためのツール" #: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91 msgid "Settings" msgstr "設定" #: ../../standalone/logdrake_.c:167 msgid "matching" msgstr "一致するもの" #: ../../standalone/logdrake_.c:168 msgid "but not matching" msgstr "以下には一致しない" #: ../../standalone/logdrake_.c:172 msgid "Choose file" msgstr "ファイルを選択" #: ../../standalone/logdrake_.c:181 msgid "Calendar" msgstr "カレンダ" #: ../../standalone/logdrake_.c:191 msgid "Content of the file" msgstr "ファイルの内容" #: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375 msgid "Mail alert" msgstr "Mail 警告" #: ../../standalone/logdrake_.c:245 #, c-format msgid "please wait, parsing file: %s" msgstr "少々お待ちを、ファイル %s を探しています。" #: ../../standalone/logdrake_.c:392 msgid "Mail alert configuration" msgstr "Mail 警告の設定" #: ../../standalone/logdrake_.c:393 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Mail 設定ユーティリティへいらっしゃいませ〜。\n" "\n" "ここでは警告システムを設定します。\n" #: ../../standalone/logdrake_.c:400 msgid "Apache World Wide Web Server" msgstr "Apache World Wide Webサーバ" #: ../../standalone/logdrake_.c:401 msgid "Domain Name Resolver" msgstr "ドメイン名解決" #: ../../standalone/logdrake_.c:402 msgid "Ftp Server" msgstr "ftp サーバ" #: ../../standalone/logdrake_.c:403 msgid "Postfix Mail Server" msgstr "Postfix メールサーバ" #: ../../standalone/logdrake_.c:404 msgid "Samba Server" msgstr "samba サーバ" #: ../../standalone/logdrake_.c:405 msgid "SSH Server" msgstr "SSH サーバ" #: ../../standalone/logdrake_.c:406 msgid "Webmin Service" msgstr "Webmin サービス" #: ../../standalone/logdrake_.c:407 msgid "Xinetd Service" msgstr "Xinetdサービス" #: ../../standalone/logdrake_.c:414 msgid "service setting" msgstr "サービス設定" #: ../../standalone/logdrake_.c:415 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "以下で選んだサービスのどれかが止まったら警報が出ます。" #: ../../standalone/logdrake_.c:428 msgid "load setting" msgstr "設定の読み込み中" #: ../../standalone/logdrake_.c:429 msgid "You will receive an alert if the load is higher than this value" msgstr "負荷がこの値を上回ったら警報が出ます" #: ../../standalone/logdrake_.c:444 msgid "alert configuration" msgstr "警告の設定" #: ../../standalone/logdrake_.c:445 msgid "Please enter your email address below " msgstr "メールアドレスを入力してください" #: ../../standalone/logdrake_.c:486 msgid "Save as.." msgstr "名前をつけて保存..." #: ../../standalone/mousedrake_.c:37 msgid "Please, choose the type of your mouse." msgstr "マウスの型はなんですか？" #: ../../standalone/mousedrake_.c:50 msgid "Emulate third button?" msgstr "真中ボタンをエミュレートしますか？" #: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87 #, fuzzy msgid "Network Monitoring" msgstr "ネットワークの設定" #: ../../standalone/net_monitor_.c:96 #, fuzzy msgid "Profile " msgstr "プロフィール: " #: ../../standalone/net_monitor_.c:99 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:103 #, fuzzy msgid "Sending Speed:" msgstr "ファイル送信中..." #: ../../standalone/net_monitor_.c:104 msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor_.c:106 #, fuzzy msgid "Connection Time: " msgstr "接続の種類: " #: ../../standalone/net_monitor_.c:113 msgid "Logs" msgstr "" #: ../../standalone/net_monitor_.c:147 #, fuzzy msgid "Wait please, testing your connection..." msgstr "接続をテストしています..." #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Connecting to Internet " msgstr "インターネットへ接続" #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Disconnecting from Internet " msgstr "インターネットへ接続" #: ../../standalone/net_monitor_.c:222 msgid "Disconnection from Internet failed." msgstr "" #: ../../standalone/net_monitor_.c:223 msgid "Disconnection from Internet complete." msgstr "" #: ../../standalone/net_monitor_.c:225 #, fuzzy msgid "Connection complete." msgstr "接続の速度: " #: ../../standalone/net_monitor_.c:226 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:330 #, fuzzy msgid "Color configuration" msgstr "警告の設定" #: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:397 msgid "average" msgstr "" #: ../../standalone/net_monitor_.c:400 #, fuzzy msgid "Local measure" msgstr "ローカルファイル" #: ../../standalone/net_monitor_.c:432 msgid "transmitted" msgstr "" #: ../../standalone/net_monitor_.c:433 msgid "received" msgstr "" #: ../../standalone/net_monitor_.c:453 #, fuzzy msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "警告、別のインターネット接続が検出されました。ネットワークは使用中かもしれま" "せん" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Connect %s" msgstr "接続" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Disconnect %s" msgstr "切断" #: ../../standalone/printerdrake_.c:47 msgid "Reading printer data ..." msgstr "プリンタの情報を読んでいます..." #: ../../standalone/scannerdrake_.c:39 msgid "Detecting devices ..." msgstr "デバイスの検出中です……" #: ../../standalone/scannerdrake_.c:39 msgid "Test ports" msgstr "ポートのテスト" #: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66 #: ../../standalone/scannerdrake_.c:79 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "%s は本バージョンのMandrake Linuxではサポートされていません" #: ../../standalone/scannerdrake_.c:54 #, c-format msgid "%s found on %s, configure it?" msgstr "%s が %s で見つかりました。設定しますか?" #: ../../standalone/scannerdrake_.c:57 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%sはスキャナデータベースにありません。手動で設定しますか?" #: ../../standalone/scannerdrake_.c:63 msgid "Select a scanner" msgstr "スキャナを選択して下さい" #: ../../standalone/scannerdrake_.c:91 #, c-format msgid "This %s scanner is unsupported" msgstr "この %s スキャナはサポートされていません" #: ../../standalone/scannerdrake_.c:105 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" "Scannerdrake は %s スキャナを検出できませんでした。\n" "スキャナが接続されているデバイスを選んでください" #: ../../standalone/scannerdrake_.c:107 msgid "choose device" msgstr "デバイス選択" #: ../../standalone/scannerdrake_.c:113 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "%s スキャナはprinterdrakeで設定してください。\n" "printerdrake の起動は、Mandrake コントロールセンターのハードウェアの項で行っ" "てください。" #: ../../standalone/scannerdrake_.c:118 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" "%s スキャナが設定されました。\n" "アプリケーションメニューのマルチメディア／グラフィックから、「Xsane」を選ぶと" "スキャナが使えます。" #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "%s ハードウェアクラスのデバイスの一部が削除されました:\n" #: ../../standalone/service_harddrake_.c:48 #, fuzzy msgid "Some devices were added:\n" msgstr "" "\n" "%s クラスのデバイスが追加されました:\n" #: ../../standalone/service_harddrake_.c:64 #, fuzzy msgid "Hardware probing in progress" msgstr "ただいま検出中" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "言語の選択" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "導入クラスの選択" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "ディスクの検出" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "マウスの設定" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "キーボードの選択" #: ../../steps.pm_.c:19 msgid "Security" msgstr "セキュリティ" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "ファイルシステム" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "フォーマット" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "パッケージの選択" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "システムの導入" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "ユーザの登録" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "ネットワーク設定" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "サービスの設定" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "ブートローダ設定" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "起動ディスク作成" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "X の設定" #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "システム更新をインストール" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "導入作業を終了" #: ../../ugtk.pm_.c:636 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "" "adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-1,-*-fixed-medium-r-" "normal--24-*-100-100-c-*-jisx0208.1983-0,*" #: ../../ugtk2.pm_.c:711 msgid "utopia 25" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "サーバ、Web/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "ネットワークコンピュータ (クライアント)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS サーバ, SMB サーバ, Proxy サーバ, SSH サーバ" #: ../../share/compssUsers:999 msgid "Office" msgstr "オフィス関連" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "Gnome ワークステーション" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Palm Pilot や Visor用ツール" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "ワークステーション" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "サーバ、ファイアウォール/ルータ" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "ドメイン名サーバ (DNS) とネットワーク情報サーバ（NIS)" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "オフィス系ソフト: ワープロ (kword, abiword), 表計算 (kspread, gnumeric), pdf" "ビューアなど" #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "オーディオ関連ツール：mp3, midi, ミキサーなど" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standard Base. Third party applications support" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Linux やフリーソフト関連の本やハウツー文書" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE ワークステーション" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwmなど" #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "マルチメディア：ビデオ" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "メール、ニュース、web, ファイル転送、チャットなどのツール" #: ../../share/compssUsers:999 msgid "Database" msgstr "データベース" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL か MySQL データベースサーバ" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "マシンの設定を楽にするツール" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "マルチメディア　サウンド" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "ドキュメンテーション" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "コンソールツール" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Postfix メールサーバ, Inn ニュースサーバ" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "インターネット・ステーション" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "マルチメディア・ステーション" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "設定" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "グラフィカルなデスクトップをもっと" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "K デスクトップ環境。基本的なグラフィスク環境に、関連ツール詰め合わせ" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "グラフィック環境" #: ../../share/compssUsers:999 msgid "Development" msgstr "開発用" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache と Pro-ftpd" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "CD をつくって焼くツール" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "オフィスワークステーション" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm など" #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "The Gimpなどの画像処理ソフト" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS " #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C と C++ 開発ライブラリ、プログラムや include ファイル" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "ネットワークコンピュータ・サーバ" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "サーバ、メール/グループウェア/ニュース" #: ../../share/compssUsers:999 msgid "Game station" msgstr "ゲームステーション" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "ビデオプレーヤや編集ソフト" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "マルチメディア　画像" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "娯楽ソフト：テレビゲーム、ボードゲーム、戦略ゲームなど" #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "メールやニュースの送受信用ツール (pine, mutt, tin..) と、Webブラウズ用ツール" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "個人の財務管理" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "使いやすいアプリケーションやデスクトップツールを持つ、グラフィクス環境" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "ssh など各種プロトコル用クライアント" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "インターネットゲートウェイ" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "サウンドやビデオの再生編集ソフト" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "その他グラフィックデスクトップ" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "エディタ、シェル、ファイル関連ツール、ターミナル" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "gnucashなどの家計管理ソフト" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "個人情報管理" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "マルチメディア　CD を焼く" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "科学ワークステーション" #~ msgid "can not open /etc/inittab for reading: %s" #~ msgstr "/etc/inittab が読みとり用に開けません: %s" #, fuzzy #~ msgid "cpu number " #~ msgstr "番号" #~ msgid "" #~ "You now have the opportunity to download encryption software.\n" #~ "\n" #~ "WARNING:\n" #~ "\n" #~ "Due to different general requirements applicable to these software and " #~ "imposed\n" #~ "by various jurisdictions, customer and/or end user of theses software " #~ "should\n" #~ "ensure that the laws of his/their jurisdiction allow him/them to " #~ "download, stock\n" #~ "and/or use these software.\n" #~ "\n" #~ "In addition customer and/or end user shall particularly be aware to not " #~ "infringe\n" #~ "the laws of his/their jurisdiction. Should customer and/or end user not\n" #~ "respect the provision of these applicable laws, he/they will incure " #~ "serious\n" #~ "sanctions.\n" #~ "\n" #~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " #~ "liable\n" #~ "for special, indirect or incidental damages whatsoever (including, but " #~ "not\n" #~ "limited to loss of profits, business interruption, loss of commercial " #~ "data and\n" #~ "other pecuniary losses, and eventual liabilities and indemnification to " #~ "be paid\n" #~ "pursuant to a court decision) arising out of use, possession, or the " #~ "sole\n" #~ "downloading of these software, to which customer and/or end user could\n" #~ "eventually have access after having sign up the present agreement.\n" #~ "\n" #~ "\n" #~ "For any queries relating to these agreement, please contact \n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgstr "" #~ "さあ、暗号化用のソフトをダウンロードする準備ができました。\n" #~ "\n" #~ "警告:\n" #~ "\n" #~ "これらのソフトに対する要件や、各地の法制度のちがいがいろいろあるので、\n" #~ "このソフトのお客様やエンドユーザは、自分の所属する法制度のもとで、こう\n" #~ "したソフトのダウンロードや保存、使用などが認められているかどうかを自分\n" #~ "で確認してください。\n" #~ "\n" #~ "さらにお客様やエンドユーザは、自分の所属する法制度の法規制に違反しない\n" #~ "ようよく注意してください。お客様やエンドユーザが該当する法規制の規定を\n" #~ "尊重しない場合には、深刻な処罰対象となる危険をおかすことになります。\n" #~ "\n" #~ "この同意書に署名した後に顧客やエンドユーザがアクセスする見込みのある、\n" #~ "これらのソフトウェアを使い、保持し、あるいはダウンロードすることによる\n" #~ "特殊、間接、偶発など一切の損害（これには売上損失、業務の停止、商用データ" #~ "の\n" #~ "喪失や関連損失と法廷判断に基づく損害賠償や補償金支払いなどが含まれるが\n" #~ "これに限られるものではない）について、Mandrakesoft やその製造業者や\n" #~ "サプライヤはいかなる場合にもなんら責任を持たない。\n" #~ "\n" #~ "以上の取り決めについての問い合わせは、以下に連絡のこと：\n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgid "Proxy configuration" #~ msgstr "プロキシの設定" #~ msgid "" #~ "Welcome to the proxy configuration utility.\n" #~ "\n" #~ "Here, you'll be able to set up your http and ftp proxies\n" #~ "with or without login and password\n" #~ msgstr "" #~ "プロクシ設定ユーティリティへいらっしゃいませ〜。\n" #~ "\n" #~ "ここでは http と ftp のプロクシを設定します。\n" #~ "ログインやパスワードも、必要なら設定できます。\n" #~ msgid "" #~ "Please fill in the http proxy informations\n" #~ "Leave it blank if you don't want an http proxy" #~ msgstr "" #~ "http プロクシ情報を入力してください\n" #~ "http proxyを使わないなら空欄にしておいてください" #~ msgid "URL" #~ msgstr "URL" #~ msgid "port" #~ msgstr "ポート" #~ msgid "Url should begin with 'http:'" #~ msgstr "Url は http://... ではじまります" #~ msgid "The port part should be numeric" #~ msgstr "ポート番号は数字です。" #~ msgid "" #~ "Please fill in the ftp proxy informations\n" #~ "Leave it blank if you don't want an ftp proxy" #~ msgstr "" #~ "ftp プロクシ情報を入力してください\n" #~ "ftp proxyを使わないなら空欄にしておいてください" #~ msgid "" #~ "Please enter proxy login and password, if any.\n" #~ "Leave it blank if you don't want login/passwd" #~ msgstr "" #~ "プロクシのログイン名とパスワードがあれば入力します。\n" #~ "ログイン/パスワードがなければ空欄のままです" #~ msgid "login" #~ msgstr "ログイン" #~ msgid "password" #~ msgstr "パスワード" #~ msgid "re-type password" #~ msgstr "パスワードをもう一度入れてください" #~ msgid "The passwords don't match. Try again!" #~ msgstr "パスワードが一致しません。もう一度入れてください！" #~ msgid "Can't write file %s" #~ msgstr "%s ファイルが書き込めません" #~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "" #~ "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-" #~ "normal--24-*-100-100-c-*-jisx0208.1983-0,*" #~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "" #~ "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-1,-*-fixed-medium-r-" #~ "normal--24-*-100-100-c-*-jisx0208.1983-0,*" #, fuzzy #~ msgid "" #~ "Warning, another internet connexion has been detected, maybe using your " #~ "network" #~ msgstr "" #~ "警告、別のインターネット接続が検出されました。ネットワークは使用中かもしれ" #~ "ません" #~ msgid "no help implemented yet.\n" #~ msgstr "ヘルプはまだ実装されていません。\n" #~ msgid "Please click on a medium" #~ msgstr "メディアをクリックしてください" #~ msgid "Removing LPRng..." #~ msgstr "LPRng 削除中……" #~ msgid "Removing LPD..." #~ msgstr "LPD 削除中……" #~ msgid "" #~ "Description:\n" #~ "\n" #~ " Drakbackup is used to backup your system.\n" #~ " During the configuration you can select \n" #~ "\t- System files, \n" #~ "\t- Users files, \n" #~ "\t- Other files.\n" #~ "\tor All your system ... and Other (like Windows Partitions)\n" #~ "\n" #~ " Drakbackup allows you to backup your system on:\n" #~ "\t- Harddrive.\n" #~ "\t- NFS.\n" #~ "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" #~ "\t- FTP.\n" #~ "\t- Rsync.\n" #~ "\t- Webdav.\n" #~ "\t- Tape.\n" #~ "\n" #~ " Drakbackup allows you to restore your system to\n" #~ " a user selected directory.\n" #~ "\n" #~ " Per default all backup will be stored on your\n" #~ " /var/lib/drakbackup directory\n" #~ "\n" #~ " Configuration file:\n" #~ "\t/etc/drakconf/drakbackup/drakbakup.conf\n" #~ "\n" #~ "Restore Step:\n" #~ " \n" #~ " During the restore step, Drakbackup will remove\n" #~ " your original directory and verify that all\n" #~ " backup files are not corrupted. It is recommended\n" #~ " you do a last backup before restoring.\n" #~ " \n" #~ "\n" #~ msgstr "" #~ " Drakbackup はシステムのバックアップに使います。\n" #~ " 設定に応じて、バックアップファイルが選べます: \n" #~ "\t- システムファイル\n" #~ "\t- ユーザファイル\n" #~ "\t- その他ファイル\n" #~ "\tあるいは全システムや、その他システム（ウィンドウズ\n" #~ "\tパーティション）もバックアップできます。\n" #~ "\n" #~ " Drakbackup では、以下のメディアにバックアップができます:\n" #~ "\t- ハードドライブ.\n" #~ "\t- NFS.\n" #~ "\t- CDROM (CDRW), DVDROM (autoboot, レスキュー、自動インストールも可).\n" #~ "\t- FTP.\n" #~ "\t- Rsync.\n" #~ "\t- Webdav.\n" #~ "\t- テープ\n" #~ "\n" #~ " Drakbackup では、他のディレクトリを選んでそこに\n" #~ " システムを復元できます。\n" #~ "\n" #~ " デフォルトではすべてのバックアップは\n" #~ " /var/lib/drakbackup ディレクトリに保存されます。\n" #~ "\n" #~ " 設定ファイル:\n" #~ "\t/etc/drakconf/drakbackup/drakbakup.conf\n" #~ "\n" #~ "復元のやり方:\n" #~ " \n" #~ " 復元ステップでは DrakBackup はもとのディレクトリを\n" #~ " 削除して、すべてのバックアップファイルが完全かどうか\n" #~ " 確かめます。復元する前に、その時点のシステムをバック\n" #~ " アップしておきましょう。\n" #~ "\n" #~ "\n" #~ msgid "" #~ "drakbug version %s\n" #~ "Copyright (C) 2002 MandrakeSoft.\n" #~ "This is free software and may be redistributed under the terms of the GNU " #~ "GPL.\n" #~ "\n" #~ "usage: drakbug [OPTIONS] [PROGRAM_NAME]\n" #~ "\n" #~ "OPTIONS:\n" #~ msgstr "" #~ "drakbug version %s\n" #~ "Copyright (C) 2002 MandrakeSoft.\n" #~ "本ソフトはフリーソフトウェアで、GNU GPLの条件下で再配布可能である。\n" #~ "\n" #~ "用法: drakbug [OPTIONS] [PROGRAM_NAME]\n" #~ "\n" #~ "OPTIONS:\n" #~ msgid " --help - print this help message.\n" #~ msgstr " --help - print this help message.\n" #~ msgid " --report - program should be one of mandrake tools\n" #~ msgstr " --report - program should be one of mandrake tools\n" #~ msgid " --incident - program should be one of mandrake tools\n" #~ msgstr " --incident - program should be one of mandrake tools\n" #~ msgid "usage: drakfloppy\n" #~ msgstr "使い方：drakfloppy\n" #~ msgid "" #~ "\n" #~ "Usage: harddrake [-h|--help] [--test]\n" #~ msgstr "" #~ "\n" #~ "使い方: harddrake [-h|--help] [--test]\n" #~ msgid "usage: keyboarddrake [--expert] [keyboard]\n" #~ msgstr "使い方: keyboarddrake [--expert] [キーボード]\n" #~ msgid "Probing %s class\n" #~ msgstr "%sクラスをプローブ中\n" #~ msgid "detected on interface %s" #~ msgstr "インターフェース %s で検出" #~ msgid "unable to backup lilo message" #~ msgstr "liloメッセージをバックアップできません" #~ msgid "can't change lilo message" #~ msgstr "liloメッセージを変更できません"