# Instalator Grafis Mandrake
# Copyright (C) 1999 Mandrakesoft
# Budi Rachmanto <rac@linux-mandrake.com>, 2001-2003
# Linux Indonesia <http://www.linux.or.id>, 1999-2001
# Mohammad DAMT <mdamt@cdl2000.com>, 1999-2001
# Andy <chandy@indo.net.id>, 1999
# Kelana <nk@telkom.net>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX 0.1\n"
"POT-Creation-Date: 2003-12-03 03:09+0100\n"
"PO-Revision-Date: 2003-08-18 15:09+0900\n"
"Last-Translator: Budi Rachmanto <rac@linux-mandrake.com>\n"
"Language-Team: Bahasa Indonesia <id@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.6\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Mendeteksi partisi untuk mencari lokasi mount"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr "jika diset ya, cek tambahan/hapusan file root suid."

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tHapus=%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "network printer port"
msgstr "port printer jaringan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr "Masukkan floppy:"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "DrakTermServ"
msgstr "Overview drakTermServ"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Backup tabel partisi tidak memiliki ukuran yg sama\n"
"Jalan terus?"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "Nama pengguna yang mana"

#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Tipe entri mana yang hendak ditambahkan?"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "Kembalikan tabel partisi"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "Konfigurasi mouse"

#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Di server CUPS \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "Konfigurasi instalasi akhir"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"The current security level is %s\n"
"Select permissions to see/edit"
msgstr ""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "Gunakan ``%s'' saja"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "Tipe"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS "
"asli tak dapat ditransfer."

#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Printer berikut\n"
"\n"
"%s%s\n"
"terhubung langsung dg sistem Anda"

#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "Republik Afrika Tengah"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "Device gateway"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Advanced preferences"
msgstr "Pilihan Lengkap"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Net Method:"
msgstr "Metode Jaring:"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Ethernetcard"
msgstr "Kartu Ethernet"

#: ../../security/l10n.pm:1
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
"Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root."

#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Parameters"
msgstr "Parameter"

#: ../../standalone/draksec:1
#, c-format
msgid "no"
msgstr "tidak"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "Deteksi otomatis"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface:"
msgstr "Antarmuka:"

#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "Pilih kelas instalasi"

#: ../../network/tools.pm:1
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Sistem ini tampaknya tak terhubung ke Internet.\n"
"Cobalah konfigurasikan ulang koneksi Anda."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Hubungkan printer Anda ke server Linux server dan membuat mesin Mindows "
"terhubung sebagai klien.\n"
"\n"
"Anda ingin lanjutkan set up printer ini seperti yang Anda lakukan sekarang?"

#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "Belarus"

#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr "Error pada saat menulis file %s"

#: ../../security/l10n.pm:1
#, c-format
msgid "Report check result to syslog"
msgstr "Laporkan hasil cek ke syslog"

#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.\n"
"apmd juga bisa untuk mematikan mesin waktu baterenya habis."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tape to backup"
msgstr "Gunakan pita utk backup"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "Paket berikut akan diinstal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "konfigurasi CUPS"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Total progress"
msgstr "Total perkembangan"

#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Tidak ada cukup ruangan untuk mengalokasikan partisi baru"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "Pindah"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Aktivitas drakbackup via %s:\n"
"\n"

#: ../../standalone/draksec:1
#, c-format
msgid "yes"
msgstr "ya"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "("
msgstr "("

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Selamat Datang di Wizard Koneksi Jaringan\n"
"\n"
"Sekarang kita akan mengkonfigurasikan internet/jaringan.\n"
"Bila Anda tidak mau menggunakan deteksi otomatis, mohon untuk tidak memilih "
"checkbox.\n"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid ")"
msgstr ")"

#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "Lebanon"

#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "Stop"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Edit selected host"
msgstr "Edit host terpilih"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD device defined!"
msgstr "Tidak ada alat CD didefinisikan!"

#: ../../network/shorewall.pm:1
#, fuzzy, c-format
msgid ""
"Please enter the name of the interface connected to the "
"internet.              \n"
"                \n"
"Examples:\n"
"                ppp+ for modem or DSL connections, \n"
"                eth0, or eth1 for cable connection, \n"
"                ippp+ for a isdn connection.\n"
msgstr ""
"Masukkan nama antarmuka yg terhubung dg Internet.\n"
"\n"
"Misal:\n"
"\t\tppp+ utk modem atau koneksi DSL, \n"
"\t\teth0, atau eth1 utk koneksi kabel, \n"
"\t\tippp+ utk koneksi isdn.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tPakai file .backupignore\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Bulagaria (fonetik)"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP start ip"
msgstr "IP awal DHCP"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kb"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Don't rewind tape after backup"
msgstr "Jangan putar balik pita setelah backup"

#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "Parameter Bootloader utama"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Tape"
msgstr "Tape"

#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr "Malaysia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning network..."
msgstr "Jaringan sedang di-scan..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr "Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc."

#: ../../standalone/drakedm:1
#, c-format
msgid "The change is done, do you want to restart the dm service ?"
msgstr "Sudah diubah, start ulang servis dm?"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "Swis (layout Prancis)"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid gagal (mungkin raidtoolsnya tak ada?)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "August"
msgstr "Agustus"

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "FTP server"
msgstr "Server NTP"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr "Webcam"

#: ../../standalone/harddrake2:1
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "ukuran cache cpu (level kedua)"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Soundcard"
msgstr "Kartu Suara"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Month"
msgstr "Mount"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Search for files to restore"
msgstr "Cari file utk direstorasi"

#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr "Luxembourg"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Utk mencetak file dari baris komando (window terminal) gunakan perintah \"%s "
"<file>\".\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "Level %s\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Syriac (phonetic)"
msgstr "Syiria (fonetik)"

#: ../../lang.pm:1
#, c-format
msgid "Iran"
msgstr "Iran"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus"
msgstr "Bus"

#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "Iraq"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "connecting to %s ..."
msgstr "koneksi ke dukun Bugzilla ..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Ada potensi konflik alamat LAN pada konfigurasi %s!\n"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring..."
msgstr "Konfigurasi..."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Pada kartu TV modern umumnya, modul bttv kernel GNU/Linux otomatis "
"mendeteksi parameter yg benar.\n"
"Jika kartu Anda tak terdeteksi, pilihlah tuner dan tipe kartu di sini. Pilih "
"parameter kartu tv Anda jika perlu"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "Katasandi (lagi)"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search installed fonts"
msgstr "Cari font terinstal"

#: ../../standalone/drakboot:1
#, c-format
msgid "Default desktop"
msgstr "Desktop standar"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""
"Klik tombol utk mengirim laporan kutu.\n"
"Ini akan membuka window browser web di %s\n"
"dan akan ada formulir untuk diisi. Info yang tampil di atas akan\n"
"ditransfer ke server tsb."

#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr "Alamat IP"

#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "Pilih ukurannya"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Daftar data rusak:\n"
"\n"

#: ../../fs.pm:1
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Hanya dapat di-mount secara eksplisit\n"
"(opsi -a takkan me-mount sistem file)."

#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Tak ada support utk modem Anda.\n"
"Coba lihat http://www.linmodems.org"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "Pilih partisi lain"

#: ../../standalone/drakperm:1
#, c-format
msgid "Current user"
msgstr "Pengguna saat ini"

#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "Nama pengguna"

#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "Kunci \"Mindows\" kiri"

#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "Guyana"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Server Configuration"
msgstr "Konfigurasi Server dhcpd"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Digunakan utk direktori:\n"
" hanya pemilik direktori atau file dalam direktori ini yg dapat menghapusnya"

#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " di server Novell \"%s\", printer \"%s\""

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Printer Name"
msgstr "Nama antrian printer"

#: ../../../move/move.pm:1
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Remove a module"
msgstr "Hapus modul"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "Katasandi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Advanced Configuration"
msgstr "Konfigurasi Lanjutan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "Sedang men-scan alat multifungsi HP Anda"

#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "Root"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Pilih RAID yang ada untuk ditambahkan ke"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Turki (model \"Q\" modern)"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo message not found"
msgstr "Pesan lilo tak ditemukan"

#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Regenerasi otomatis header kernel di /boot utk\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "if needed"
msgstr "jika perlu"

#: ../../standalone/drakclock:1
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Failed..."
msgstr "Restorasi Gagal..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "Simpan katasandi sistem di konfigurasi drakbackup."

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Linux-"
"Mandrake distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Linux-Mandrake distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Linux-Mandrake sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../standalone/drakboot:1
#, c-format
msgid "Default user"
msgstr "Pengguna standar"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"koordinat x sudut kiri\n"
"atas papan perkembangan"

#: ../../standalone/drakgw:1
#, c-format
msgid "Current interface configuration"
msgstr "Konfigurasi antarmuka kini"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Bila Anda punya card ISA, konfigurasi pada layar berikut nanti harusnya "
"sudah benar.\n"
"\n"
"Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda "
"itu.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "Jangan cetak halaman tes"

#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr "Gurmukh"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s already in use\n"
msgstr "%s sudah dipakai\n"

#: ../../any.pm:1
#, c-format
msgid "Force No APIC"
msgstr "Tanpa ACPI"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Katasandinya terlalu mudah (harus paling tidak %d karakter)"

#: ../../standalone.pm:1
#, c-format
msgid "[keyboard]"
msgstr "[papanketik]"

#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "Proxy FTP"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install List"
msgstr "Daftar Instalasi"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Change\n"
"Restore Path"
msgstr ""
"Ubah\n"
"Path Restorasi"

#: ../../standalone/logdrake:1
#, c-format
msgid "Show only for the selected day"
msgstr "Tampilkan hari terpilih saja"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kb"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Catatan: port paralel tak dapat dideteksi secara otomatis)"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "Tipe card mana yang Anda punya?"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "Keamanan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Anda juga dapat memakai antarmuka grafis \"xpdq\" untuk setting opsi dan "
"kontrol job cetak.\n"
"Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon \"tombol panik\", "
"di desktop, berlabel \"STOP Printer!\", yang menghentikan semua job cetak "
"seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.\n"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Pilih data utk direstorasi..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Unknown"
msgstr "Tak dikenal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Server ini sudah terdaftar, tak dapat ditambahkan lagi.\n"

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "Konfigurasi Jaringan"

#: ../../standalone/logdrake:1
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol lain \n"
" tanpa D-Channel (leased lines)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ mengkonfigurasikan file ini agar bekerja dlm "
"hubungan dg image yg dibuat oleh\n"
"        \t\tmkinitrd-net, dan entri di /etc/dhcpd.conf, utk melayani image "
"boot ke tiap\n"
"        \t\tklien diskless.\n"
"\n"
"        \t\tContoh file konfigurasi tftp:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \t\tPerubahan dari instalasi standar adalah flag disable jadi 'no'\n"
"        \t\tdan path direktori jadi /var/lib/tftpboot, tempat mkinitrd-net\n"
"        \t\tmenaruh image."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr "Opsi %s harus berupa bilangan!"

#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "Catatan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Belum ada konfigurasi X. Cukup begini saja?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi "
"dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan "
"\"Konfigurasi manual\"."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "Tipe partisi apa yang hendak digunakan?"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""
"daftar file yg dikirim oleh FTP: %s\n"
" "

#: ../../standalone/drakconnect:1
#, c-format
msgid "Interface"
msgstr "Interface"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Multisession CD"
msgstr "CD multisesi"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "string terpisah koma"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Mesin yg scanner-nya akan dipakai:"

#: ../../standalone/logdrake:1
#, c-format
msgid "Messages"
msgstr "Pesan"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Takdikenal|CPH06X (bt878) [banyak vendors]"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "Server POP dan IMAP"

#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr "Meksiko"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model stepping"
msgstr "Stepping model"

#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr "Rwanda"

#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr "Swiss"

#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Punya antarmuka %s?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "You must be root to read configuration file. \n"
msgstr "Hanya root yg dapat membaca file konfigurasi.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Pilihan printer lpd remote"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the username. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"%s\".\n"
"If you are not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux adalah sistem multiuser, artinya tiap pengguna bisa punya "
"kesukaan,\n"
"file dll sendiri. Bacalah ``Pedoman Pemula'' utk belajar lebih dalam.\n"
"Tapi tak seperti \"root\", sang administrator, pengguna di sini tak berhak\n"
"mengubah apapun kecuali konfigurasi dan file mereka sendiri. Anda harus\n"
"membuat setidaknya satu pengguna reguler utk Anda sendiri. Account ini Anda\n"
"pakai utk rutinitas. Meski Anda dapat login sbg \"root\" tiap hari, tapi\n"
"itu amat berbahaya! Kesalahan terkecil dapat menyebabkan sistem Anda tak\n"
"bekerja selamanya. Meski Anda melakukan kesalahan serius sbg pengguna\n"
"normal, Anda hanya akan kehilangan sebagian informasi, tidak seluruh "
"sistem.\n"
"\n"
"Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda dapat\n"
"mengisinya sesuka Anda. DrakX akan mengambil kata pertama yg anda masukkan\n"
"di kotak sbg \"Nama pengguna\". Ini adalah nama pengguna yg dipakai utk "
"login ke\n"
"sistem. Anda dapat mengubahnya. Lalu Anda harus mengisi katasandi. "
"Katasandi\n"
"pengguna non-privileged (reguler) tak sepenting katasandi \"root\" dari "
"segi\n"
"keamanan, tapi tak ada alasan utk mengabaikannya - file Anda bisa beresiko.\n"
"\n"
"Klik \"Buat pengguna baru\", lalu Anda dapat menambahkan pengguna sebanyak "
"Anda\n"
"mau. Misalnya, tambahkan pengguna utk teman, ayah, atau saudara Anda. Bila\n"
"Anda selesai menambahkan semua pengguna, pilih \"Lanjut ->\".\n"
"\n"
"Klik \"Tambahan\" memungkinkan Anda mengubah \"cangkang\" standar utk\n"
"pengguna terkait (standar: bash).\n"
"\n"
"Selesai menambahkan pengguna, Anda akan ditanya utk memilih pengguna yg dpt\n"
"otomatis login saat komputer di-boot. Bila tertarik (dan tak begitu peduli\n"
"dg sekuritas lokal), pilihlah pengguna dan manajer window-nya, lalu klik\n"
"\"Lanjut ->\". Jika tak tertarik, jangan tandai kotak \"Anda ingin fitur ini?"
"\"."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Internet Access..."
msgstr "Konfigurasi Akses Internet..."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr "Pilih interval waktu backup"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "Norwegia"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Delete profile"
msgstr "Hapus profil"

#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "Denmark"

#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr "Secara otomatis nyalakan numlock saat boot pada console/XFree."

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Masukkan konfigurasi IP untuk mesin ini.\n"
"Tiap item harus diberikan sebagai alamat IP dalam notasi decimal\n"
"bertitik (misalnya 202.159.35.32)."

#: ../../help.pm:1
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"Instalasi Mandrake Linux terdiri atas bbrp CDROM. DrakX tahu jika paket\n"
"terpilih berada di CDROM lain dan akan mengeluarkan CD yg ada utk kemudian\n"
"meminta Anda memasukkan CD yg diperlukan."

#: ../../standalone/drakperm:1
#, c-format
msgid "When checked, owner and group won't be changed"
msgstr "Jika dipilih, pemilik dan grup takkan diubah"

#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Tuesday"
msgstr "Selasa"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Processors"
msgstr "Prosesor"

#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Kepulauan Svalbard dan Jan Mayen"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No NIC selected!"
msgstr "Tidak ada NIC yg dipilih!"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"Problem konfigurasi.\n"
"Tes koneksi Anda via net_monitor atau mcc. Jika koneksi tak berjalan, Anda "
"mungkin perlu jalankan konfigurasi dari awal lagi"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "partisi %s sekarang jadi %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Other files..."
msgstr "Backup file lain..."

#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Congo (Kinshasa)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "IP server SMB"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Tabel partisi pada drive %s akan ditulis ke disk!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing HPOJ package..."
msgstr "Instalasi paket HPOJ..."

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
"tergantung pada bootloader. Ini berguna bila Anda tidak mau menginstal\n"
"lilo (atau grub) di sistem Anda, atau saat sistem operasi lain menghapus\n"
"lilo, atau lilo tak bisa digunakan pada konfigurasi hardware Anda.\n"
"Bootdisk ini juga bisa digunakan dengan image rescue Mandrake, yang\n"
"memudahkan kita untuk merecover sistem dari kegagalan. Ingin buat bootdisk?\n"
"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      Laporan Daemon DrakBackup\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "Latvia"

#: ../../standalone/drakbackup:1
#, c-format
msgid "monthly"
msgstr "bulanan"

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Retry"
msgstr "Restorasi"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Module name"
msgstr "Nama modul"

#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "Start saat boot"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental Backups"
msgstr "Pakai Backup Incremental"

#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Sektor pertama di drive (MBR)"

#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr "Joystick"

#: ../../standalone/harddrake2:1
#, c-format
msgid "DVD"
msgstr "DVD"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr "Pakai Unicode sebagai standar"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "modul kernel GNU/Linux yang menangani alat tersebut"

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Jam hardware diset ke GMT"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "Sedang mencoba menyelamatkan tabel partisi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Opsi %s harus berupa integer!"

#: ../../security/l10n.pm:1
#, c-format
msgid "Use password to authenticate users"
msgstr "Pakai katasandi utk pembuktian pengguna"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Entri yang harus Anda penuhi:\n"
"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""
"Utk backup ke media lain, file tetap dibuat di harddisk, lalu dipindah ke "
"media lain. Pengaktifan opsi ini akan menghapus file tar di harddisk setelah "
"backup."

#: ../../standalone/livedrake:1
#, c-format
msgid "Unable to start live upgrade !!!\n"
msgstr "Gagal memulai upgrade live !!!\n"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "Nama: "

#: ../../standalone/drakconnect:1
#, c-format
msgid "up"
msgstr ""

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 juta warna (24 bit)"

#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "Izinkan semua pengguna"

#: ../advertising/08-store.pl:1
#, c-format
msgid "The official MandrakeSoft Store"
msgstr "Toko resmi MandrakeSoft"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "Sedang mengubah ukuran"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Enter the maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Masukkan ukuran maximum\n"
" yg diizinkan utk Drakbackup"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "Konfigurasi jaringan kabel"

#: ../../standalone/drakperm:1 ../../standalone/logdrake:1
#, c-format
msgid "User"
msgstr "Pengguna"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "Lakukan backup baru sebelum restorasi (hanya utk backup incremental.)"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid gagal"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Name"
msgstr "Nama"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulasi tombol 3"

#: ../../security/l10n.pm:1
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "Cek penambahan/penghapusan file sgid"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files..."
msgstr "Kirim file..."

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Ibrani (fonetik)"

#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "akses ke peralatan rpm"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Pilih/masukkan printer/device!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission problem accessing CD."
msgstr "Problem izin pada akses CD."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "Nomor telepon"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Error: driver \"%s\" utk kartu suara Anda tak terdaftar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "Nama, penjelasan, lokasi printer"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (broadcast)"
msgstr "AS (siaran)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "Gunakan ekstensi Xinerama"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: ../../standalone/drakxtv:1
#, c-format
msgid "West Europe"
msgstr "Eropa Barat"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On CD-R"
msgstr "di CDROM"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""
"[OPSI] [NAMA_PROGRAM]\n"
"\n"
"OPSI:\n"
"  --help            - cetak pesan ini.\n"
"  --report          - program harus berupa alat mandrake\n"
"  --incident        - program harus berupa alat mandrake"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake2 version %s"
msgstr "Harddrake2 versi %s"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Preferences"
msgstr "Kesukaan"

#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr "Swaziland"

#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "Republik Dominika"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "Salin %s"

#: ../../standalone/draksplash:1
#, c-format
msgid "Choose color"
msgstr "Pilih warna"

#: ../../keyboard.pm:1
#, c-format
msgid "Syriac"
msgstr "Syria"

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-UID"
msgstr "Set-UID (ID Pengguna)"

#: ../../help.pm:1
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on this partition\n"
"will be lost and will not be recoverable!"
msgstr ""
"Pilih harddrive yg akan dihapus utk disediakan bagi partisi\n"
"Linux Mandrake. Hati-hati, semua data di situ akan hilang dan\n"
"tak dapat dikembalikan seperti semula!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Gunakan tombol %c dan %c untuk memilih entri yang disorot"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Mouse Generik 2 Tombol"

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "Izinkan \"%s\" utk eksekusi file"

#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Hapus dulu volume logiknya\n"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Entri yang dipilih akan diboot secara otomatis dalam %d detik."

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"Tak dapat menulis /etc/sysconfig/bootsplash\n"
"File tak ditemukan."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet access"
msgstr "Akses Internet"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"koordinat x kotak\n"
"teks (jumlah huruf)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr "Untuk mendapat daftar opsi printer klik \"Daftar opsi cetak\"."

#: ../../standalone/drakgw:1
#, c-format
msgid "Enabling servers..."
msgstr "Server-server akan dinyalakan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "Pencetakan halaman tes..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Transfer sukses\n"
"Anda mungkin ingin mengecek Anda dapat login ke server dg:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"tanpa ditanyai katasandi."

#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Partisi dengan titik mount %s sudah ada\n"

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr "Aktifkan/Matikan cek keamanan tiap jam oleh msec."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
"partition. Resizing can be performed without the loss of any data, provided\n"
"you have previously defragmented the Windows partition and that it uses the\n"
"FAT format. Backing up your data is strongly recommended.. Using this\n"
"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
"Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrake Linux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
"Guide''."
msgstr ""
"Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di harddisk.\n"
"Jika harddisk masih kosong / ada sistem operasi lain yg mengisi seluruhnya,\n"
"Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi harddisk\n"
"adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem\n"
"Mandrake Linux.\n"
"\n"
"Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), proses\n"
"partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n"
"berpengalaman. Untungnya, DrakX mempermudah proses ini.\n"
"Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.\n"
"\n"
"Ada bbrp opsi tergantung konfigurasi harddisk Anda:\n"
"\n"
" * \"Pakai ruang kosong\": opsi ini akan secara otomatis mem-partisi drive\n"
"kosong Anda. Anda takkan ditanya lebih jauh.\n"
"\n"
" * \"Pakai partisi yang sudah ada\": akan dideteksi satu/lebih partisi\n"
"Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi ini.\n"
"\n"
" * \"Pakai ruang kosong pada partisi Mindows\": jika wicrosoft mindows\n"
"terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat ruang\n"
"kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n"
"(lihat solusi \"Hapus seluruh disk\" atau mode \"Ahli\") atau dapat juga\n"
"mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan tanpa\n"
"harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux\n"
"Mandrake dan wicrosoft mindows dlm satu komputer.\n"
"\n"
"   Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft mindows\n"
"sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk menyimpan\n"
"data / menginstal software baru menjadi kecil.\n"
"\n"
" * \"Hapus seluruh disk\": jika Anda ingin hapus semua data dan partisi di\n"
"harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake Linux,\n"
"pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n"
"\n"
"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
"\n"
" * \"Buang Mindows\": ini akan menghapus semua di drive dan mulai proses\n"
"partisi dari nol. Semua data di disk akan hilang.\n"
"\n"
"   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
"\n"
" * \"Partisi manual\": pilih jika Anda ingin secara manual mempartisi "
"harddisk.\n"
"Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan data\n"
"dg mudah. Instruksi penggunaan DiskDrake dapat dilihat di bagian\n"
"``Pengaturan Partisi'' dalam ``Pedoman Pemula''."

#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr "Ukraina"

#: ../../standalone/drakbug:1
#, c-format
msgid "Application:"
msgstr "Aplikasi:"

#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr "Modem ISDN external"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "jika diset ke ya, laporkan hasil cek dg mail."

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "Pilihan Anda? (default %s) "

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr "Trouble shooting"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Halaman tes telah dikirim ke printer.\n"
"Akan butuh waktu sebentar untuk mulai mencetak.\n"
"Status cetak:\n"
"%s\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "daily"
msgstr "harian"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and one unknown printer"
msgstr "dan satu printer tak dikenal"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "Irlandia"

#: ../../standalone/drakbackup:1
#, c-format
msgid "         Restore Configuration       "
msgstr "         Restorasi Konfigurasi    "

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Is this the correct setting?"
msgstr "Sudah benar?"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"Kini koneksi internet/jaringan akan disetup. Jika Anda ingin menyambung\n"
"komputer Anda dg Internet atau jaringan lokal, klik \"Lanjut ->\". Deteksi\n"
"otomatis perangkat jaringan dan modem akan diluncurkan. Jika deteksi gagal,\n"
"selanjutnya jangan tandai kotak \"Pakai deteksi otomatis\". Anda juga dapat\n"
"memilih tak mengkonfigurasikan jaringan, atau mengerjakannya nanti; jika\n"
"demikian, klik tombol \"Batal\".\n"
"\n"
"Koneksi yg tersedia adalah: modem tradisional/ISDN, hubungan ADSL, modem\n"
"kabel, dan hubungan LAN (Ethernet).\n"
"\n"
"Di sini konfigurasi tak dirinci. Pastikan Anda punya semua parameter dari\n"
"ISP atau administrator sistem, seperti alamat IP, gateway, server DNS, dll.\n"
"\n"
"Penjelasan dapat dilihat di ``Pedoman Pemula'' bab hubungan Internet. Atau\n"
"tunggulah hingga sistem terinstal dan pakailah program yg dijelaskan utk\n"
"setup koneksi."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wizard Configuration"
msgstr "Konfigurasi Dukun"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "Probe otomatis"

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set to yes, check for :\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"jika ya, cek :\n"
"\n"
"- katasandi kosong,\n"
"\n"
"- katasandi kosong di /etc/shadow\n"
"\n"
"- pengguna dg id 0 yg bukan root."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files..."
msgstr "Backup file sistem..."

#: ../../any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Tanpa domain NIS, broadcast tak dapat dipakai"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Menghapus printer \"%s\"..."

#: ../../security/l10n.pm:1
#, c-format
msgid "Shell history size"
msgstr "Ukuran sejarah cangkang"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""
"Di mana file auto_install.cfg berada?\n"
"\n"
"Biarkan kosong jika tak ingin men-set up modus instalasi otomatis.\n"
"\n"

#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "Konfigurasikan koneksi"

#: ../../standalone/harddrake2:1
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "tingkat info yg didapat dg perintah cpuid"

#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr "Peru"

#: ../../standalone/drakbackup:1
#, c-format
msgid " on device: %s"
msgstr " di device: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "Buang Mindows"

#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Aktifkan Server Font X (agar XFree dapat berjalan)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Sebagian besar nilai disusun dari sistem Anda\n"
"yg sedang berjalan. Ubah seperlunya."

#: ../../standalone/drakfont:1
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Pilih file font atau direktori dan klik 'Tambah'"

#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: ../../standalone/drakbug:1
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Cron not available yet as non-root"
msgstr "Cron non-root belum tersedia"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "Sistem"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Do you want to use this feature?"
msgstr "Ingin pakai fitur ini?"

#: ../../keyboard.pm:1
#, c-format
msgid "Arabic"
msgstr "Arab"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Opsi:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Password required"
msgstr "Katasandi dibutuhkan"

#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d menit"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "Kartu grafis: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV transfer failed!"
msgstr "Transfer WebDAV gagal!"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "Konfigurasi XFree"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "Pilih aksi"

#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "Polinesia Perancis"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""
"Biasanya DrakX dapat mendeteksi jumlah tombol mouse Anda. Jika gagal, ia\n"
"akan berasumsi mouse Anda bertombol dua dan akan menset-up emulasi tombol\n"
"ketiga. DrakX otomatis tahu itu mouse PS/2, serial atau USB.\n"
"\n"
"Jika Anda ingin menunjuk tipe mouse lain, pilih tipe yg sesuai dari daftar\n"
"yang disediakan.\n"
"\n"
"Jika Anda memilih mouse bukan standar, Anda akan dihadapkan pada layar tes\n"
"mouse. Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tak\n"
"bekerja baik tekan spasi atau [Enter] untuk membatalkan dan pilih lagi.\n"
"\n"
"Mouse beroda kadang tak otomatis terdeteksi, jadi Anda perlu memilihnya "
"dari\n"
"daftar. Cek port-nya. Setelah memilih mouse dan menekan \"Lanjut ->\", "
"image\n"
"mouse akan tampak di layar. Gerakkan rodanya, tekan tombolnya, dan periksa\n"
"apakah gerakan pointer di layar selaras dg gerakan mouse."

#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Support OKI 4w and winprinter kompatibel."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""
"File atau wildcard yg terdaftar dalam file .backupignore pada puncak pohon "
"direktori takkan di-backup."

#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Menginstal driver untuk kartu %s %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Anda telah men-transfer printer standar lama Anda (\"%s\"), Akankah ia juga "
"dijadikan printer default pada sistem cetak baru %s?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Enable Server"
msgstr "Aktifkan Server"

#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "Ukraina"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware "
"Anda, lalu coba konfigurasikan printer remote Anda lagi."

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "Izinkan \"%s\" utk menulis file"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Masukkan floppy boot ke drive %s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local network(s)"
msgstr "Jaringan lokal"

#: ../../help.pm:1
#, c-format
msgid "Remove Windows"
msgstr "Buang M$ Windows"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
"applications menu."
msgstr ""
"%s telah dikonfigurasikan.\n"
"Anda dapat men-scan dokumen dg \"XSane\" dari Multimedia/Grafik di menu "
"aplikasi."

#: ../../harddrake/data.pm:1
#, c-format
msgid "Firewire controllers"
msgstr "Pengontrol Firewire"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"Setelah Anda menyetel parameter bootloader, daftar opsi yg akan\n"
"tampak saat boot akan ditampilkan.\n"
"\n"
"Jika ada sistem operasi lain di mesin Anda, mereka otomatis ditambahkan ke\n"
"menu boot. Tuning dapat dilakukan dg menekan \"Tambah\" utk membuat entri\n"
"baru; pilihlah salah satu entri dan klik \"Ubah\" atau \"Hapus\" utk\n"
"memodifikasi atau menghapusnya. \"OK\" memberlakukan perubahan Anda.\n"
"\n"
"Anda mungkin juga tak ingin memberikan akses ke sistem operasi lain ini\n"
"kepada siapapun yg pergi ke konsol dan me-reboot mesin. Anda dapat\n"
"menghapus entri yg bersangkutan dari menu bootloader, tapi Anda akan perlu\n"
"disket boot utk memboot sistem operasi tersebut!"

#: ../../standalone/drakboot:1
#, c-format
msgid "System mode"
msgstr "Mode sistem"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Jika ingin mencetak pakai printer NetWare, berikan nama server printer "
"NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer "
"yang ingin digunakan beserta nama pengguna dan katasandinya."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Netmask:"
msgstr "Netmask:"

#: ../../network/adsl.pm:1
#, c-format
msgid "Do it later"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "Sambung"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "Penyegaran daftar printer (utk menampilkan semua printer CUPS remote)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Jika opsi ini dipilih, pada tiap penyalaan CUPS akan dipastikan bahwa\n"
"\n"
"- jika LPD/LPRng terinstal, /etc/printcap takkan ditindih oleh CUPS\n"
"\n"
"- jika /etc/cups/cupsd.conf hilang, akan dibuatkan\n"
"\n"
"- saat info printer disiarkan, tidak ada nama server \"localhost\"<.\n"
"\n"
"Jika tindakan ini menimbulkan masalah, matikan opsi ini, tapi Anda harus\n"
"memperhatikan poin-poin ini."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Bila Anda mau, auto install bisa dilakukan secara otomatis penuh,\n"
"jadi instalasinya akan mengusai hard drive!\n"
"(ini dimaksudkan untuk menginstall pada komputer lain)\n"
"\n"
"Mungkin Anda perlu mengulangi instalasinya.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Printer jaringan \"%s\", port %s"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network "
"Anda."

#: ../../standalone/drakbackup:1
#, c-format
msgid "OK to restore the other files."
msgstr "OK utk restorasi file lain."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Pilih layout papanketik Anda"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr "Device Printer URI"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not erasable media!"
msgstr "Media tak terhapuskan"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "Terminal-based"

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr "Aktifkan/Matikan proteksi pemalsuan IP."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Instalasi sistem cetak dalam level keamanan %s"

#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "Nama pengguna terlalu panjang"

#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "OS Lain (mindows...)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "Situs remote WebDAV telah sinkron!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "Pembacaan database printer..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "Buat floppy instalasi otomatis"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t name pengguna: %s\n"
"\t\t di path: %s \n"

#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr "Somalia"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No open source driver"
msgstr "Tidak ada driver open source"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Def."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.\n"
"Fitur sekuriti maksimum."

#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr "Nicaragua"

#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr "Caledonia Baru"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Protokol Eropa (EDSS1)"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Delete"
msgstr "/_Hapus"

#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "Mode video"

#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr "Oman"

#: ../../standalone/logdrake:1
#, c-format
msgid "Please enter your email address below "
msgstr "Masukkan alamat email Anda di bawah "

#: ../../standalone/net_monitor:1
#, c-format
msgid "Network Monitoring"
msgstr "Pemantauan Jaringan"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "Ukuran baru dalam MB: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "Partisi tipe: %s\n"

#: ../../any.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "Otentikasi Domain Mindows"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "Keyboard US"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "Emulasi tombol"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", printer jaringan \"%s\", port %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Aktivitas drakbackup via tape:\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Problem koneksi FTP: Gagal mengirim file backup dengan FTP.\n"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Sending Speed:"
msgstr "Laju Pengiriman:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Tester suara klasik akan menjalankan perintah berikut:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" akan memberitahu Anda driver mana yg\n"
"dipakai oleh kartu Anda secara default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" memberitahu driver apa yg dipakai\n"
"sekarang\n"
"\n"
"- \"/sbin/lsmod\" mencek apakah modul (driver) ybs dimuat atau tidak\n"
"\n"
"- \"/sbin/chkconfig --list sound\" dan \"/sbin/chkconfig --list alsa\" akan\n"
"memberitahu Anda apakah servis suara dan alsa terkonfigurasi utk dijalankan\n"
"pada initlevel 3\n"
"\n"
"- \"aumix -q\" memberitahu apakah volume suara dipadamkan atau tidak\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" akan memberitahu program mana yg memakai\n"
"kartu suara.\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Halt bug"
msgstr "Kutu halt"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert configuration"
msgstr "Konfigurasi peringatan Mail"

#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: ../../standalone/logdrake:1
#, c-format
msgid "Matching"
msgstr "Pencocokan"

#: ../../keyboard.pm:1
#, c-format
msgid "Bosnian"
msgstr "Bosnia"

#: ../../standalone/drakbug:1
#, c-format
msgid "Release: "
msgstr "Release: "

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "Laju koneksi"

#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr "Namibia"

#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "Server Database"

#: ../../standalone/harddrake2:1
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "kapasitas khusus driver (kemampuan bakar dan/atau support DVD)"

#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Tidak dapat menambah partisi ke RAID md%d yang terformat"

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Antarmuka jaringan"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG.\n"
"Kartu Anda ini dapat digunakan XFree %s yang lebih baik dalam 2D."

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security options..."
msgstr "Tunggu, opsi keamanan sedang diset..."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Takdikenal|CPH05X (bt878) [banyak pembuat]"

#: ../../standalone/drakboot:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Jalankan X-Window saat sistem dimulai"

#: ../../standalone/drakbackup:1
#, c-format
msgid "hourly"
msgstr "perjam"

#: ../../keyboard.pm:1
#, c-format
msgid "Right Shift key"
msgstr "Kunci Shift kanan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr "          Berhasil Direstorasi di %s    "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Sediakan port printer utk CUPS..."

#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua dan Barbuda"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Menunjukkan bhw katasandi di database sistem berbeda dg yg di database\n"
"Server Terminal. Hapus/tambahlah lagi pengguna ke Server Terminal agar\n"
"dapat login."

#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "Spanyol"

#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "Mulai"

#: ../../security/l10n.pm:1
#, c-format
msgid "Direct root login"
msgstr "Login root langsung"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "Konfigurasi aplikasi..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Selamat Datang di Penolong Setup Printer\n"
"\n"
"Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini, dg "
"jaringan atau dg mesin Mindows remote.\n"
"\n"
"Hubungkan dan nyalakan semua printer yg terhubung dg mesin ini agar dapat "
"dideteksi. Juga printer jaringan dan mesin Mindows harus terhubung dan "
"dinyalakan.\n"
"\n"
"Ingat, deteksi printer jaringan butuh waktu lebih lama daripada printer yg "
"terhubung langsung dg mesin ini. Matikan deteksi printer jaringan dan/atau "
"Mindows jika tak perlu.\n"
"\n"
" Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup "
"printer sekarang."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "Konfigurasi koneksi modem biasa "

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "File Selection"
msgstr "Pilihan File"

#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Erase tape before backup"
msgstr "Hapus pita sebelum backup"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Run config tool"
msgstr "Jalankan alat konfigurasi"

#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "Instalasi Bootloader"

#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "Ukuran partisi root dalam MB: "

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Paket ini harus diinstal, tak bisa dibuang"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
msgstr ""
"        - Buat disket/CD etherboot:\n"
"        \t\tMesin klien diskless perlu image ROM di NIC, disket boot atau\n"
"        \t\tCD utk memulai boot. drakTermServ membantu membuat image ini,\n"
"        \t\tberdasarkan NIC di mesin klien.\n"
"        \t\t\n"
"        \t\tContoh pembuatan disket boot utk 3Com 3c509 secara manual:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
"        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Image ISO Etherboot adalah %s"

#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk "
"menerjemahkan nama host ke IP address."

#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr "Santa Lucia"

#: ../../standalone/drakbackup:1
#, c-format
msgid "November"
msgstr "November"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Disconnect..."
msgstr "Koneksi diputus"

#: ../../standalone/drakbug:1
#, c-format
msgid "Report"
msgstr "Laporan"

#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr "Palau"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "level"

#: ../advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""
"Semua insiden akan di-followup oleh pakar teknis MandrakeSoft berkualitas."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "Pilihan Grup Paket"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "Aktifkan konfigurasi hardware lokal."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Restorasi Via Protokol Jaringan: %s"

#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Konfigurasi tiap parameter modul dapat dilakukan di sini."

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Pilih resolusi dan kedalaman warna"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Emulate third button?"
msgstr "Emulasikan tombol ketiga?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Anda tak dapat membuat partisi baru\n"
"(karena jumlah maksimal partisi primer telah tercapai).\n"
"Hapuslah satu partisi primer dan buatlah partisi extended."

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "Mount"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Creating auto install floppy"
msgstr "Disket auto install sedang dibuat"

#: ../../steps.pm:1
#, c-format
msgid "Install updates"
msgstr "Instal update"

#: ../../standalone/draksplash:1
#, c-format
msgid "text box height"
msgstr "tinggi kotak teks"

#: ../../standalone/drakconnect:1
#, c-format
msgid "State"
msgstr "Status"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Pastikan media ada di device %s"

#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "Aktifkan profil majemuk"

#: ../../fs.pm:1
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "Jangan ubah device khusus blok atau karakter di sistem file."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
"Opsi ini memungkinkan backup / restorasi semua file di direktori /etc.\n"

#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "Printer lokal"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Files Restored..."
msgstr "File Telah Direstorasi..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "Pilihan paket"

#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr "Mauritania"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"Konfigurasi dapat tetap dipakai dengan anggapan Anda telah menset up server "
"DHCP; tolong periksa apakah jaringan lokal Anda terbaca dengan benar; "
"Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP takkan "
"disentuh.\n"
"\n"
"Entri DNS standar adalah Caching Nameserver terkonfigurasi di tembok api. "
"Anda dapat menggantinya dg IP DNS ISP, misalnya.\n"
"\n"
"Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama "
"alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., "
"sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer "
"USB kedua: /dev/usb/lp1, ...)."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "Semua partisi primary telah digunakan"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr " di server LPD \"%s\", printer \"%s\""

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Setelah itu, silakan restart X Anda agar bebas dari masalah pergantian\n"
"nama host."

#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Deteksi dan konfigurasi otomatis hardware saat boot."

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation Server Configuration"
msgstr "Konfigurasi Server Instalasi"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "Konfigurasi IDE"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "Fungsi network tak dikonfigurasi"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Configure module"
msgstr "Konfigurasi modul"

#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Kepulauan Cocos (Keeling)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "Nomor telepon provider"

#: ../../printer/main.pm:1
#, c-format
msgid "Host %s"
msgstr "Host %s"

#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "Fiji"

#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "Armenia"

#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "Drive disket kedua"

#: ../../standalone/harddrake2:1
#, c-format
msgid "About Harddrake"
msgstr "Tentang Harddrake"

#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr "Sahkan koneksi TCP X Window"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Drive capacity"
msgstr "Kapasitas drive"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Masukkan disket ke drive\n"
"semua data di disket ini akan hilang"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "Ukuran: %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control dan Shift bersamaan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "secondary"
msgstr "sekunder"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Backup Configuration."
msgstr "Lihat Konfigurasi Backup."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "jika ya, laporkan hasil cek ke syslog."

#. -PO: keep this short or else the buttons will not fit in the window
#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "Tanpa katasandi"

#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr "Nigeria"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: %s memerlukan nama host...\n"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "Tidak ada partisi yang bisa digunakan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Scanner berikut\n"
"\n"
"%s\n"
"tersedia di sistem Anda.\n"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr ", alat multifungsi di port paralel #%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Untuk mencetak ke printer TCP/socket, berikan nama host atau IP printer dan "
"nomor portnya (default 9100). Nomor port server HP JetDirect biasanya 9100, "
"server lain mungkin bervariasi. Lihat manual perangkat keras Anda."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "Info hard drive"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "Rusia"

#: ../../lang.pm:1
#, c-format
msgid "Jordan"
msgstr "Jordania"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "Sembunyikan file"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Deteksi printer yg terhubung dg mesin ini"

#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "Tiada floppy drive tersedia"

#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "Bolivia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Set up server Windows Anda agar printer tersedia di protokol IPP dan set up "
"pencetakan dari mesin ini dengan tipe koneksi \"%s\" di Printerdrake.\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "Paket buruk"

#: ../advertising/07-server.pl:1
#, c-format
msgid ""
"Transform your computer into a powerful Linux server: Web server, mail, "
"firewall, router, file and print server (etc.) are just a few clicks away!"
msgstr ""
"Jadikan mesin Anda server perkasa dengan hanya beberapa klik mouse: server "
"Web, email, firewall, router, server file dan cetak, ..."

#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "Opsi Dasar DrakSec"

#: ../../standalone/draksound:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Catatan: jika Anda punya kartu suara PnP ISA, Anda harus menggunakan "
"sndconfig.  Ketikkan \"sndconfig\" di konsol."

#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr "Romania"

#: ../../standalone/drakperm:1
#, c-format
msgid "Group"
msgstr "Grup"

#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "Kanada"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "choose device"
msgstr "pilih device"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "Hapus dari LVM"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "Zonawaktu"

#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "Jerman"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Next ->"
msgstr "Lanjutkan ->"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Turning on this allows to print plain text files in japanese language. Only "
"use this function if you really want to print text in japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"Nyalakan ini HANYA BILA Anda benar-benar perlu mencetak teks bahasa Jepang, "
"jika ini aktif Anda tak dapat mencetak huruf aksen font latin dan takkan "
"dapat menyetel margin, ukuran huruf, dsb. Setting ini hanya berlaku bagi "
"printer yg didefinisikan di mesin ini. Jika ingin mencetak teks Jepang di "
"printer mesin lain, aktifkan fungsi ini di mesin remote tsb."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Mungkin partisi ini adalah \n"
"partisi Driver, sebaiknya\n"
"biarkan begitu saja.\n"

#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinea-Bissau"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "Laju refresh horisontal"

#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Edit"
msgstr "Edit"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Tak bisa unset mount point karena partisi ini sudah digunakan untuk\n"
"loopback. Hapus dulu loopbacknya."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""
"Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. "
"Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan "
"konfigurasi dengan Pusat Kontrol Mandrake, bagian \"Network & Internet\"/"
"\"Koneksi\", lalu set printer juga dg Pusat Kontrol Mandrake, bagian "
"\"Hardware\"/\"Printer\""

#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr "Pengontrol USB"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "Norm apa yg digunakan TV Anda?"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Type:"
msgstr "Tipe:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "Nama share"

#: ../../standalone/drakgw:1
#, c-format
msgid "enable"
msgstr "aktifkan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr "Mandrake Linux sedang dihubungi untuk mengambil daftar mirror"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Problem terjadi saat restart jaringan:\n"
"\n"
"%s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "Hapus file loopback?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "Ukuran terpilih melebihi area yg ada"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr "Nama server NCP hilang!"

#: ../../any.pm:1
#, c-format
msgid "Please choose your country."
msgstr "Pilih negara Anda."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup files..."
msgstr "File Backup Hard Disk..."

#: ../../keyboard.pm:1
#, c-format
msgid "Laotian"
msgstr "Laos"

#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Protokol rstat digunakan pada jaringan untuk mengambil\n"
"ukuran kinerja sistem di network."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Re-generating list of configured scanners ..."
msgstr "Daftar konfigurasi scanner sedang dibuat lagi..."

#: ../../modules/interactive.pm:1
#, fuzzy, c-format
msgid "Module configuration"
msgstr "Konfigurasi manual"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Scanner"
msgstr "Scanner"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Awas: pengujian kartu grafis ini dapat membekukan komputer"

#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Nama pengguna hanya boleh terdiri dari huruf, angka, `-' dan `_'"

#: ../../standalone/drakbug:1
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "Selamat Datang di Crackers"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "Pilihan Modul:"

#: ../advertising/11-mnf.pl:1
#, c-format
msgid "Secure your networks with the Multi Network Firewall"
msgstr "Amankan jaringan Anda dg Tembok Api Jaringan Majemuk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr "Jalan tanpa konfigurasi jaringan"

#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "Batal"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Tiada prompt katasandi di %s pada port %s"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Usage of remote scanners"
msgstr "Pemakaian scanner remote"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr "Partisi Mindows Anda terlalu terfragmen, jalankan ``defrag'' dulu"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norwegia)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Kemajuan Backup Hard Disk..."

#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Unable to fork: %s"
msgstr "Fork gagal: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "Tipe: "

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Edit Klien"

#: ../../standalone/drakfont:1
#, c-format
msgid "no fonts found"
msgstr "tiada font ditemukan"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "Mouse"

#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "tak cukup ruang di /boot"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "trying to promote %s"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "Nama Host"

#: ../../standalone/draksplash:1
#, c-format
msgid "the color of the progress bar"
msgstr "warna papan perkembangan"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Fonts Files"
msgstr "Sembunyikan File Font"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "Tambahkan ke RAID"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"Anda dapat menambahkan entri yaboot, baik untuk OS lain, kernel lain, atau\n"
"untuk image boot darurat.\n"
"\n"
"Untuk OS lain, entri hanya berisi label dan partisi \"root\".\n"
"\n"
"Untuk Linux, ada beberapa pilihan:\n"
"\n"
" * Label: nama yg harus diketik di prompt yaboot utk memilih opsi boot ini.\n"
"\n"
" * Image: nama kernel untuk diboot. Biasanya bernama vmlinux atau nama lain\n"
"yang mirip dengan vmlinux atau ditambahkan ekstensi lain.\n"
"\n"
" * Root: device \"root\" atau ``/'' untuk instalasi Linux Anda.\n"
"\n"
" * Append: pada hardware Apple, opsi append kernel sering digunakan untuk\n"
"menolong inisiasi hardware video, atau pengaktifan emulasi tombol mouse\n"
"pada papanketik utk mouse Apple yang tidak memiliki tombol kedua dan "
"ketiga.\n"
"Berikut adalah beberapa contohnya:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: opsi ini bisa dipakai utk memuat modul awal sebelum device boot\n"
"tersedia, atau untuk memuat image ramdisk untuk situasi boot darurat.\n"
"\n"
" * Initrd-size: standar ukuran ramdisk biasanya 4096 kbyte. Jika Anda perlu\n"
"mengalokasikan ramdisk yang lebih besar, gunakan opsi ini.\n"
"\n"
" * Read-write: umumnya partisi \"root\" diberikan secara readonly agar bisa\n"
"dilakukan pengecekan filesystem sebelum sistem \"hidup\". Di sini Anda bisa\n"
"mengubah kelakuan aslinya.\n"
"\n"
" * NoVideo: Jika hardware video Apple problematis, Anda dapat memakai opsi\n"
"ini utk mem-boot dalam mode ``novideo'', dengan support framebuffer native.\n"
"\n"
" * Default: opsi standar Linux, dapat dipilih hanya dg menekan ENTER pada\n"
"prompt yaboot. Entri ini juga akan ditandai \"*\" jika Anda menekan [Tab]\n"
"untuk melihat pilihan boot."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "Printer \"%s\" sukses ditambahkan ke Star Office/OpenOffice.org/GIMP."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr "Floppy drive tak tersedia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "
"\"Daftar opsi cetak\".%s%s%s\n"
"\n"

#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr "Arab Saudi"

#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "Internet"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "Jalan terus?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau "
"yang mirip."

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "Printer"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices were added:\n"
msgstr "Beberapa device ditambahkan:\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Ukuran: %s silinder, %s head, %s sektor\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Pencetakan di printer \"%s\""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
"/etc/hosts.allow dan /etc/hosts.deny sudah dikonfigurasikan - tak diubah"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Tape"
msgstr "Restorasi Dari Pita"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid ""
"To submit a bug report, click the report button, which will open your "
"default browser\n"
"to Anthill where you will be able to upload the above information as a bug "
"report."
msgstr ""
"Klik tombol utk mengirim laporan kutu.\n"
"Ini akan membuka window browser web di %s\n"
"dan akan ada formulir untuk diisi. Info yang tampil di atas akan\n"
"ditransfer ke server tsb."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "Pilih profil yang hendak Anda konfigurasikan"

#: ../../security/l10n.pm:1
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr "Panjang minimum katasandi serta jumlah digit dan huruf besar"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""
"\n"
"\n"
"Masukkan nama host Zeroconf tanpa titik jika Anda tak ingin menggunakan\n"
"nama host yg disediakan."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now from configuration file"
msgstr "Backup Sekarang dari file konfigurasi"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Titik mount harus hanya berupa huruf atau angka"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "Mulai ulang sistem cetak ..."

#: ../../../move/tree/mdk_totem:1
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "Lihat info hardware"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Day"
msgstr "Mei"

#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "Sektor pertama di partisi boot"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr "Pembuat, model printer"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[OPSI]...\n"
"Konfigurator Server Terminal Mandrake\n"
"--enable         : aktifkan MTS\n"
"--disable        : matikan MTS\n"
"--start          : jalankan MTS\n"
"--stop           : stop MTS\n"
"--adduser        : tambahkan pengguna sistem yg telah ada ke MTS (perlu nama "
"pengguna)\n"
"--deluser        : hapus pengguna sistem yg telah ada dari MTS (perlu nama "
"pengguna)\n"
"--addclient      : tambahkan mesin klien ke MTS (perlu alamat MAC, IP, nama "
"image nbi)\n"
"--delclient      : hapus mesin klien dari MTS (perlu alamat MAC, IP, nama "
"image nbi)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet Mask:"
msgstr "Mask Subnet:"

#: ../../security/l10n.pm:1
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr "Set kadaluarsa katasandi dan delay penonaktifan account"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Ada dua parameter penting, yaitu laju refresh vertikal, yaitu laju\n"
"kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah\n"
"laju sync horisontal, yaitu laju kecepatan saat menanyangkan scan line.\n"
"\n"
"Anda TIDAK BOLEH mengisi parameter yang tak dapat diimbangi oleh kemampuan\n"
"monitor Anda, karena ia akan rusak berat.\n"
"Jika ragu, gunakan setting yang umum."

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "Modifikasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Komando \"%s\" dan \"%s\" juga memungkinkan modifikasi setting opsi job "
"cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya "
"\"%s <file>\".\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Need hostname, username and password!"
msgstr "Perlu namahost, namapengguna dan katasandi!"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "Masukkan disket ke %s"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV adalah protokol yg memungkinkan Anda me-mount direktori server web\n"
"secara lokal, dan memperlakukannya sbg sistem file lokal (asal server web\n"
"dikonfigurasikan sbg server WebDAV). Jika Anda ingin menambah titik mount\n"
"WebDav, pilih \"Baru\"."

#: ../../standalone/drakbug:1
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "baru"

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr "Aktifkan/Matikan laporan syslog ke konsol 12"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Would you like to try again?"
msgstr "Ingin coba lagi?"

#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "Dukun"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected server"
msgstr "Edit server yg dipilih"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose where you want to backup"
msgstr "Pilih tempat backup"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include the browser cache"
msgstr "Jangan masukkan cache browser"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Gagal mencek sistem file %s. Ingin direparasi? (awas, data Anda bisa hilang)"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Pilih papanketik Anda"

#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "Standar"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Please choose your mouse type."
msgstr "Pilih tipe mouse Anda."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Connect..."
msgstr "Sambungkan..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Konfigurasi printer \"%s\" gagal!"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "not configured"
msgstr "tak dikonfigurasikan"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../standalone/drakfont:1
#, c-format
msgid "About"
msgstr "Keterangan"

#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "Konfigurasi proxy"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "Mulai: sektor %s\n"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "No Mask"
msgstr "Mask Buruk"

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface already configured"
msgstr "Antarmuka network telah dikonfigurasi"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr "Gagal akses ke floppy!"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "Server Mail"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "Silakan pilih partisi"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ", alat multifungsi di HP JetDirect"

#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "Linux"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Have a nice day!"
msgstr "Daagh!"

#: ../../help.pm:1
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Upgrade %s"
msgstr "Upgrade %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "Pilih koneksi Printer"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels in progress ..."
msgstr "Kanal TV sedang di-scan ..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""
"Error saat pengiriman file via FTP.\n"
" Betulkan konfigurasi FTP Anda."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range Start:"
msgstr "Awal Kisaran IP:"

#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"daemon superserver internet (biasa dipanggil inetd) bertugas untuk\n"
"menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab\n"
"atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan\n"
"inetd berarti menonaktifkan semua servis-servis tadi."

#: ../../standalone/draksplash:1
#, c-format
msgid "the height of the progress bar"
msgstr "tinggi papan perkembangan"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Simpan via %s di host: %s\n"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "Argentina"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "Server Nama Domain"

#: ../../standalone/draksec:1
#, c-format
msgid "Security Level:"
msgstr "Tingkat Keamanan:"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Mount point harus diawali dengan /"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Choose your CD/DVD device"
msgstr "Pilih device CD/DVD"

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "CUPS server"
msgstr "Server DNS"

#: ../../standalone/logdrake:1
#, c-format
msgid "Postfix Mail Server"
msgstr "Server Mail Postfix"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "Keluar tanpa menyimpan"

#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr "Yaman"

#: ../advertising/11-mnf.pl:1
#, c-format
msgid "This product is available on the MandrakeStore Web site."
msgstr "Produk ini tersedia di situs MandrakeStore"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Banyak yang dapat dipilih dari (%s).\n"

#: ../../standalone/drakclock:1
#, c-format
msgid "GMT - DrakClock"
msgstr ""

#: ../../../move/move.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "Deteksi hard disk"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Anda belum memilih grup paket.\n"
"Pilih instalasi minimal yang Anda ingin:"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Masukkan URL server WebDAV"

#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr "Tajikistan"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "Terima"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "Description"
msgstr "Keterangan"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Please enter summary text."
msgstr "Masukkan login"

#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "error membuka file %s untuk ditulisi: %s"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "Jenis Mouse: %s\n"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s."

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "Pilih monitor"

#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "Label tak boleh kosong"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr "Malta (Inggris)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "Partisi tak dapat ditambah"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "Ukuran dalam MB: "

#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "printer remote"

#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "Pilihlah bahasa yg akan dipakai."

#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"AWAS: device ini sebelumnya telah dikonfigurasikan untuk terhubung ke "
"Internet.\n"
"Tekan OK untuk tetap menggunakan konfigurasi lama.\n"
"Bila ingin menggantinya, silakan ganti isi pada kolom-kolom di konfigurasi "
"ini."

#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Komputer Anda dapat diset agar secara otomatis login dg satu pengguna."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Floppy format"
msgstr "Format disket"

#: ../../standalone/drakfont:1
#, c-format
msgid "Generic Printers"
msgstr "Printer Generik"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Pilih printer tempat job cetak Anda harus disalurkan atau ketikkan nama "
"device/file"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Scanner di mesin ini dapat dipakai oleh komputer lain"

#: ../../any.pm:1
#, c-format
msgid "First sector of the root partition"
msgstr "Sektor pertama di partisi root"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Alternative drivers"
msgstr "Driver alternatif"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"Periksa semua opsi yang Anda inginkan.\n"

#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "Tanjung Verde"

#: ../../standalone/harddrake2:1
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "apakah cpu ini punya kutu Coma 6x86 Cyrix"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Loading printer configuration... Please wait"
msgstr "Modifikasi konfigurasi printer"

#: ../../standalone/harddrake2:1
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr "pentium lama penuh kesalahan dan beku bila men-decode kode byte F00F"

#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "Guam"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di "
"baris masukan"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Options/Test"
msgstr "/Pilihan/Test"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Level ini harus digunakan hati-hati. Ia akan membuat sistem Anda akan mudah\n"
"digunakan, tapi sangat sensitif: mesin ini tidak boleh digunakan untuk\n"
"mesin yang terhubung ke mesin lain atau ke Internet. Tidak akan ada\n"
"akses katasandi."

#: ../../fs.pm:1
#, c-format
msgid "Mounting partition %s"
msgstr "Gandeng partisi %s"

#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "Nama pengguna"

#: ../../standalone/drakbug:1
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Partisi mana yang hendak dipakai oleh Linux4Win?"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "kdesu hilang"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "Halaman tes"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Logical volume name "
msgstr "Nama volume lojik "

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Daftar data restorasi:\n"
"\n"

#: ../../fs.pm:1
#, c-format
msgid "Checking %s"
msgstr "Periksa %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "Opsi Printer TCP/Soket"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr "Mem kartu (DMA)"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnecting from Internet "
msgstr "Pemutusan hubungan dari Internet "

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "Perancis"

#: ../../standalone/drakperm:1
#, c-format
msgid "browse"
msgstr "jelajah"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr "Pemeriksaan perangkat lunak terinstal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "Nama printer remote hilang!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Anda ingin mengaktifkan pencetakan di printer jaringan lokal?\n"

#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr "Turki"

#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "usb speedtouch Alcatel"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Number of buttons"
msgstr "Jumlah tombol"

#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnam \"numeric row\" QWERTY"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Module"
msgstr "Modul"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"Antrian tak dibuat oleh program ini atau \"foomatic-configure\" tak dapat "
"ditransfer."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware"
msgstr "Piranti Keras"

#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl dan Alt bersamaan"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "Amerika Serikat"

#: ../../security/l10n.pm:1
#, c-format
msgid "User umask"
msgstr "Umask pengguna"

#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "Default OS?"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "Swis (layout Jerman)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "Konfigurasikan semua head secara terpisah"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Pilihlah printer yang ingin diset up. Konfigurasi printer akan bekerja "
"otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda "
"konfigurasi sendiri, jalankan \"Konfigurasi manual\"."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "Server NTP"

#: ../../security/l10n.pm:1
#, c-format
msgid "Sulogin(8) in single user level"
msgstr "Sulogin(8) dalam level pengguna single"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "Muat/Simpan di floppy"

#: ../../standalone/draksplash:1
#, c-format
msgid "This theme does not yet have a bootsplash in %s !"
msgstr "Tema ini belum punya bootsplash di %s !"

#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "bagus"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Leaving in %d seconds"
msgstr "Keluar dalam %d detik"

#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Di serial port mana modem Anda terhubung?"

#: ../../standalone/drakperm:1
#, c-format
msgid "Property"
msgstr "Properti"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN Configuration"
msgstr "konfigurasi LAN"

#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "Ghana"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Path or Module required"
msgstr "Path atau Modul dibutuhkan"

#: ../../standalone/drakfont:1
#, c-format
msgid "Advanced Options"
msgstr "Opsi Lanjutan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Configuration"
msgstr "Lihat Konfigurasi"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Coma bug"
msgstr "Kutu Coma"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": unchecking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Kini Anda perlu menentukan partisi yg akan dipakai utk instalasi sistem\n"
"Mandrake Linux. Jika partisi telah didefinisikan, pada instalasi\n"
"GNU/Linux sebelumnya atau dg alat partisi lain, Anda dapat memakai partisi\n"
"yang ada. Jika tidak, partisi harddisk harus didefinisikan.\n"
"\n"
"Utk membuat partisi, pertama pilihlah harddisk. Anda dapat memilih disk utk\n"
"dipartisi dg mengklik \"hda\" utk harddisk IDE pertama, \"hdb\" utk disk\n"
"kedua, \"sda\" untuk drive SCSI pertama dst.\n"
"\n"
"Untuk mempartisi harddisk terpilih, opsi berikut dapat digunakan:\n"
"\n"
" * \"Hapus semua\": opsi ini menghapus semua partisi pd harddisk terpilih.\n"
"\n"
" * \"Alokasi otomatis\": opsi ini memungkinkan Anda secara otomatis membuat\n"
"partisi ext3 dan swap di ruang kosong hard drive Anda.\n"
"\n"
"\"Lainnya\": berikan fitur tambahan:\n"
"\n"
" * \"Simpan tabel partisi\": simpan tabel partisi ke disket. Berguna\n"
"untuk pemulihan tabel-partisi di kemudian hari bila perlu. Amat disarankan.\n"
"\n"
" * \"Pulihkan tabel partisi\": mengembalikan tabel partisi yg disimpan\n"
"sebelumnya dari floppy.\n"
"\n"
" * \"Selamatkan tabel partisi\": jika tabel partisi Anda rusak, cobalah\n"
"mengembalikannya dg opsi ini. Hati-hati dan ingat bhw ini bisa gagal.\n"
"\n"
" * \"Muat ulang tabel partisi\": buang semua perubahan dan muat tabel\n"
"partisi semula.\n"
"\n"
" * \"Mount otomatis media lepas\": Jika tak dipilih, pengguna harus\n"
"secara manual me-mount/unmount media lepas seperti disket dan CD-ROM.\n"
"\n"
" * \"Wizard\": pilih ini jika ingin memakai wizard utk mempartisi harddisk.\n"
"Disarankan jika Anda tak faham ttg partisi.\n"
"\n"
" * \"Kembali\": untuk membatalkan perubahan.\n"
"\n"
" * \"Ubah ke mode normal/ahli\": aksi tambahan proses partisi (tipe, opsi,\n"
"format) dan informasi lebih.\n"
"\n"
" * \"Selesai\": simpan perubahan ke harddisk bila Anda selesai mempartisi.\n"
"\n"
"Catatan: Anda dapat meraih semua opsi dg memakai papanketik. Gunakan [Tab]\n"
"dan panah [Up/Down]. Ukuran partisi juga bisa diubah dg tombol panah.\n"
"\n"
"Saat partisi dipilih, Anda dapat menggunakan:\n"
"\n"
" * Ctrl-c utk membuat partisi baru (bila partisi kosong dipilih);\n"
"\n"
" * Ctrl-d utk menghapus partisi;\n"
"\n"
" * Ctrl-m utk menset titik mount\n"
"\n"
"Info sistem file lain yg tersedia dapat dibaca di \"Manual Referensi\" bab\n"
"ext2fs.\n"
"\n"
"Jika Anda menginstal mesin PPC Anda perlu membuat partisi \"bootstrap\" HFS\n"
"kecil setidaknya 1MB yg akan dipakai oleh bootloader yaboot. Jika dibuat\n"
"lebih besar, katakan 50MB, Anda dapat memanfaatkannya utk menyimpan kernel\n"
"cadangan dan image ramdisk utk situasi boot darurat."

#: ../../help.pm:1
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"Kartu Grafik\n"
"\n"
"   Instalator dapat secara otomatis mendeteksi dan mengkonfigurasikan\n"
"kartu grafik mesin Anda. Jika gagal, pilih kartu yg sesuai di daftar ini.\n"
"\n"
"   Jika tersedia beberapa server utk kartu Anda, dengan/tanpa akselerasi\n"
"3D, Anda akan ditanyai mana yg tercocok dg kebutuhan Anda."

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "Ada error saat instalasi paket:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Konfigurasi Lexmark inkjet"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "Kembali"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "Simpan tabel partisi"

#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "Finland"

#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr "Macedonia"

#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Sharing tiap pengguna menggunakan grup \"fileshare\". \n"
"Anda dapat memakai userdrake utk menambah pengguna di grup ini."

#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "Slovenia"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"Sahkan:\n"
"\n"
"- semua servis yg dikontrol oleh tcp_wrappers (lihat manual hosts.deny(5)) "
"jika diset \"SEMUA\",\n"
"\n"
"- hanya yg lokal jika diset ke \"LOKAL\"\n"
"\n"
"- tak satu-pun jika diset ke \"TIADA\".\n"
"\n"
"Utk mensahkan servis yg dibutuhkan, gunakan /etc/hosts.allow (lihat hosts."
"allow(5))."

#: ../../lang.pm:1
#, c-format
msgid "Libya"
msgstr "Libya"

#: ../../standalone/drakgw:1
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Printer di port paralel #%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Bakar ke CD"

#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "Tabel"

#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "tidak bisa melakukan format %s dengan tipe %s"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "Model"
msgstr "Model"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "USB printer #%s"
msgstr "printer USB #%s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Stop Server"
msgstr "Stop Server"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"Pilih tema untuk\n"
"lilo dan bootsplash,\n"
"Anda dapat memilih\n"
"secara terpisah"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Modem"
msgstr "Modem"

#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: ../../help.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "Gunakan deteksi otomatis"

#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam\n"
"Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada "
"konsol\n"
"dan juga bikin menu pop-up di konsol."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Started on boot"
msgstr "Dijalankan saat boot"

#: ../advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""
"Ikut online dengan tim support MandrakeSoft dan Komunitas Linux utk berbagi "
"pengetahuan dan membantu sesama dengan menjadi Pakar di situs support teknik "
"online:"

#: ../../security/l10n.pm:1
#, c-format
msgid "No password aging for"
msgstr "Tidak ada penuaan katasandi utk"

#: ../../standalone/draksec:1
#, c-format
msgid ""
"The following options can be set to customize your\n"
"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
"Opsi berikut dapat diset utk mengatur keamanan sistem Anda.\n"
"Jika Anda butuh penjelasan, carilah di bagian Pertolongan.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Cari printer di mesin lain secara otomatis"

#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "Nusantara"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On Tape Device"
msgstr "di Device Pita"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Simpan ke tape di alat: %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Login name"
msgstr "Nama login"

#: ../../security/l10n.pm:1
#, c-format
msgid "Report unowned files"
msgstr "Laporkan file tak bertuan"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Del profile..."
msgstr "Hapus profil..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr "Instalasi Foomatic ..."

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Silakan log out dan tekan Ctrl-Alt-BackSpace"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected"
msgstr "terdeteksi"

#: ../../network/netconnect.pm:1
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Jaringan perlu dijalankan ulang. Anda ingin restart?"

#: ../../standalone/drakbug:1
#, c-format
msgid "Package: "
msgstr "Paket: "

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "Tak dapat menulis /etc/sysconfig/bootsplash."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr "PERINGATAN KEAMANAN!"

#: ../../standalone/drakfont:1
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: ../../standalone/drakboot:1
#, c-format
msgid "No, I don't want autologin"
msgstr "Tidak, saya tak mau autologin"

#: ../../standalone/drakbug:1
#, c-format
msgid "Windows Migration tool"
msgstr "Alat Migrasi Mindows"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "All languages"
msgstr "Semua bahasa"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "Hapus %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s not found...\n"
msgstr "%s tak ditemukan...\n"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "Tes koneksi Anda..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cache size"
msgstr "Ukuran cache"

#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr "Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "Sektor awal: "

#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongo (Brazzaville)"

#: ../../standalone/drakperm:1
#, c-format
msgid "Read"
msgstr "Baca"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket %s perlu diupgrade. Anda ingin instal?"

#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar "
"model di database untuk menemukan yang paling cocok. Ini mungkin salah, "
"khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah "
"pilihan sudah benar dan klik \"Model sudah benar\", jika salah, klik \"Pilih "
"model secara manual\" sehingga Anda dapat memilih model printer Anda secara "
"manual di layar berikut.\n"
"\n"
"Printerdrake telah menemukan:\n"
"\n"
"%s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Bad password on %s"
msgstr "Salah katasandi pada %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Sebuah printer tak dikenal terhubung langsung dengan sistem Anda"

#: ../../keyboard.pm:1
#, c-format
msgid "Right Control key"
msgstr "Kunci Control kanan"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s"

#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr "Zambia"

#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Admin Keamanan (login / email)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Sorry, we support only 2.4 kernels."
msgstr "Maaf, support hanya untuk kernel 2.4"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "Romania (qwerty)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Under Devel ... please wait."
msgstr "Sedang dibangun ... tunggu."

#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "Mesir"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "Republik Ceko"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "Kartu suara"

#: ../../standalone/drakfont:1
#, c-format
msgid "Import Fonts"
msgstr "Impor Font"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Anda punya satu partisi besar Windows MicroSoft.\n"
"Disarankan utk mengubah ukuran partisi ini\n"
"(klik di situ, lalu pilih \"Ubah ukuran\")"

#: ../../standalone/drakfont:1
#, c-format
msgid "Suppress Temporary Files"
msgstr "Sembunyikan file temporer"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Selamat, jaringan dan Internet telah dikonfigurasikan.\n"
"\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "Mengubah tipe partisi"

#: ../../help.pm:1
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""
"Resolusi\n"
"\n"
"   Anda dapat memilih resolusi dan kedalaman warna yg tersedia utk piranti\n"
"keras Anda. Pilihlah yg paling sesuai dg kebutuhan Anda (Anda dapat\n"
"menggantinya setelah instalasi). Contoh konfigurasi yg Anda pilih akan\n"
"ditampilkan di monitor."

#: ../../standalone/draksec:1
#, c-format
msgid "Network Options"
msgstr "Opsi Jaringan"

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable msec hourly security check"
msgstr "Aktifkan cek keamanan perjam oleh msec"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Display tema\n"
"di konsol"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(di %s)"

#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "Library penahan serangan string format dan overflow buffer"

#: ../../standalone/net_monitor:1
#, c-format
msgid "average"
msgstr "rata-rata"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "Nama printer baru"

#: ../../fs.pm:1
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"Izinkan pengguna biasa me-mount sistem file.\n"
"Nama pe-mount tertulis di mtab sehingga ia dapat meng-unmount sistem file\n"
"lagi. Opsi ini mempengaruhi opsi noexec, nosuid, dan nodev\n"
"(kecuali jika ditindih opsi berikutnya, seperti user,exec,dev,suid di baris\n"
"opsi)."

#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "Guinea Equator"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup System"
msgstr "Backup sistem"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Build Backup"
msgstr "Bangun Backup"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Utk mencetak file dari baris komando (jendela terminal) gunakan komando \"%s "
"<file>\" atau \"%s <file>\".\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "Saat ini tidak ada kemungkinan lain"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "Romania (qwertz)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Write Config"
msgstr "Tulis konfigurasi"

#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Daemon routed digunakan untuk update tabel routing IP otomatis liwat\n"
"protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya\n"
"maka protokol routing yang canggih pun semakin dibutuhkan."

#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech Mouse (serial, old C7 type)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""
"Kunci lain (bukan drakbackup)\n"
"sudah ada di tempat"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"X (Sistem Window X) adalah inti antarmuka grafis GNU/Linux tempat semua\n"
"lingkungan grafis (KDE, GNOME, AfterStep, WindowMaker, dll.) berdasar.\n"
"\n"
"Akan disajikan daftar parameter yg (mungkin) perlu diubah agar diperoleh\n"
"display grafis optimal:\n"
"\n"
"\n"
"Kartu Graphis\n"
"\n"
"   Instalator mendeteksi dan mengkonfigurasikan kartu grafik mesin Anda.\n"
"Jika salah, pilihlah yg benar di daftar ini.\n"
"\n"
"   Jika ada bbrp server tersedia utk kartu Anda, dg atau tanpa akselerasi\n"
"3D, pilihlah yg paling cocok dg keperluan.\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Monitor dideteksi otomatis. Jika salah, pilih yg benar dari daftar ini.\n"
"\n"
"\n"
"Resolusi\n"
"\n"
"   Pilih resolusi dan kedalaman warna dari yg tersedia utk hardware Anda.\n"
"Pilih yg tercocok dg keperluan (Anda dapat menggantinya setelah instalasi).\n"
"Contoh konfigurasi ditampilkan di monitor.\n"
"\n"
"\n"
"Tes\n"
"\n"
"   Sistem akan mencoba membuka layar grafis pada resolusi yg diinginkan. "
"Jika\n"
"Anda dapat melihat pesan saat tes dan menjawab \"Ya\", DrakX akan maju ke "
"tahap\n"
"berikut. Jika pesan tak tampak, berarti ada beberapa bagian konfigurasi yg\n"
"tak benar dan tes akan selesai dalam 12 detik, membawa Anda kembali ke "
"menu.\n"
"Ubah setting hingga Anda dapatkan display grafis yg benar.\n"
"\n"
"\n"
"Opsi\n"
"\n"
"   Mesin dapat diset agar menjalankan antarmuka grafis saat boot. Jelas, "
"Anda\n"
"akan bilang \"Tidak\" jika mesin (hanya) akan berfungsi sbg server atau "
"Anda\n"
"gagal dalam mengkonfigurasikan display."

#: ../../standalone/draksplash:1
#, c-format
msgid "Browse"
msgstr "Jelajah"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Anda ingin tes koneksi Internet sekarang?"

#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "Belgia"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Anda punya kartu suara ISA?"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Tidak ada adapter jaringan ethernet yang terdeteksi di sistem ini.\n"
"Tipe koneksi ini tak dapat diset up."

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Windows"
msgstr "Mindows"

#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Gagal membuat screenshot sebelum buat partisi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Name"
msgstr "Nama Host"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/Save _As"
msgstr "/File/Simpan _Dengan nama lain"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Utk mengakses printer di server CUPS dalam jaringan lokal Anda hanya perlu\n"
"menyalakan opsi \"Cari printer di mesin lain secara otomatis\"; server CUPS\n"
"secara otomatis memberitahu mesin Anda ttg printer mereka. Semua printer yg\n"
"kini dikenal oleh mesin Anda terdaftar di bagian \"Printer remote\" window\n"
"utama Printerdrake. Jika server CUPS Anda tak berada di jaringan lokal,\n"
"masukkan alamat IP (dan nomor port bila perlu) utk mendapat info printer\n"
"dari server."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s tak ada di database scanner, konfigurasikan secara manual?"

#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "Delay sebelum boot ke image default"

#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "Batasi parameter command line"

#: ../../standalone/drakxtv:1
#, c-format
msgid "East Europe"
msgstr "Eropa Timur"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "Pakai ruang kosong"

#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "gunakan dhcp"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mail alert"
msgstr "Pemberitahuan Mail"

#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "Konfigurasi Internet"

#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr "Terdeteksi %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _printers"
msgstr "/Deteksi otomatis _printer"

#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "Selesai"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "Tunjukkan paket yang sudah dipilih secara otomatis"

#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr "Togo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "Flag CPU yg dilaporkan oleh kernel"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Ada yg salah! - mkisofs sudah diinstal?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "Silakan ulangi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "Model sudah benar"

#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Resize FAT gagal: %s"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "Pilih paket sendiri"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "Ukuran partisi ini tidak dapat diubah"

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Location"
msgstr "Lokasi"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable-hrc)"
msgstr "AS (kabel-hrc)"

#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "FS terjournal"

#: ../../security/l10n.pm:1
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr "Cek kekacauan kartu ethernet"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This machine"
msgstr "Mesin ini"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS letter: %s (hanya tebakan)\n"

#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Pilih file atau direktori dan klik 'OK'"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit scsi modules"
msgstr "abaikan modul SCSI"

#: ../../standalone/harddrake2:1
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "keluarga cpu (mis: 6 utk kelas i686)"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Jaringan Anda sudah terkonfigurasi lho\n"
"Silakan klik OK untuk rekonfigurasi ulang koneksi jaringan/internet ini, "
"atau batal jika Anda berubah pikiran.\n"

#: ../../security/l10n.pm:1
#, c-format
msgid "Run the daily security checks"
msgstr "Jalankan cek keamanan harian"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Layout papanketik: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Di sini Anda dapat memilih apakah printer yg terhubung dg mesin ini bisa "
"diakses oleh mesin remote dan oleh mesin remote mana."

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr "Malta (Amerika)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Mount dan unmount semua Network File System (NFS), SMB (Lan\n"
"Manager/windows), dan NCP (Netware)."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Launch the wizard"
msgstr "Luncurkan penolong"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Tvcard"
msgstr "Kartu TV"

#: ../../help.pm:1
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Ubah ke modus normal/ahli"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Size"
msgstr "Ukuran"

#: ../../help.pm:1
#, c-format
msgid "GRUB"
msgstr "GRUB"

#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "Greenland"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Thursday"
msgstr "Kamis"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "Bukan label pita yang benar. Pita berlabel %s."

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Konfigurasi Internet Connection Sharing telah seleasi.\n"
"Namun sekarang sudah aktif.\n"
"\n"
"Apa yang ingin Anda lakukan?"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete All NBIs"
msgstr "Hapus Semua NBI"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer grub (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""
"Dialog tuning pemuat boot:\n"
"\n"
" * \"Pemuat boot yang digunakan\": ada tiga pilihan:\n"
"\n"
"    * \"GRUB\": jika Anda suka GRUB (menu teks).\n"
"\n"
"    * \"LILO dengan menu teks\": jika suka LILO dengan antarmuka menu teks.\n"
"\n"
"    * \"LILO dengan menu grafis\": jika Anda suka LILO dg antarmuka grafis.\n"
"\n"
" * \"Device boot\": Umumnya Anda takkan mengubah standar (\"/dev/hda\"),\n"
"tapi jika suka, bootloader dapat diinstal di harddisk kedua (\"/dev/hdb\"),\n"
"ataupun disket (\"/dev/fd0\").\n"
"\n"
" * \"Delay sebelum boot ke image default\": delay yang diberikan di menu\n"
"pemuat boot kepada pengguna saat me-reboot komputer untuk memilih entri.\n"
"\n"
"!! Awas, jika pemuat boot tak diinstal (dg memilih \"Lewati\"),\n"
"pastikan Anda punya jalan memboot sistem Mandrake Linux! Juga pastikan\n"
"bahwa Anda tahu apa yang Anda lakukan sebelum mengubah opsi. !!\n"
"\n"
"Klik \"Tambahan\" utk menampilkan opsi lain, yg disediakan utk pengguna ahli."

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""
"Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Konfigurasi XFree mana yang Anda inginkan?"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "Lainnya"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
"scanbus' would also show you the device number."
msgstr ""
"Ini menggunakan syntax seperti program baris perintah 'cdrecord'. 'cdrecord -"
"scanbus' juga akan menunjukkan nomor device."

#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.\n"
"Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.\n"
"Jika mesin Anda hanya berfungsi sebagai klien, pilihlah level lebih rendah."

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Server Name"
msgstr "Nama Server:"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "Katasandi Account"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""
"%s tak dapat ditampilkan\n"
". Tiada Pertolongan utk entri tipe ini\n"

#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Anda memutuskan instalasi pemuat boot di partisi.\n"
"Berarti Anda sudah punya pemuat boot di harddisk yang Anda boot (mis: System "
"Commander).\n"
"\n"
"Di drive mana Anda boot?"

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"AWAS!\n"
"\n"
"DrakX sekarang hendak mengubah ukuran partisi Mindows Anda. Hati-hati:\n"
"proses ini amat berbahaya. Bila Anda belum melakukannya, silakan\n"
"keluar dari proses instalasi ini, lalu reboot ke windows\n"
"jalankan scandisk (dan defrag juga) di partisi ini lalu backup datanya.\n"
"Setelah yakin, tekan Ok."

#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "Papanketik Tajik"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Anda dapat menyalin konfigurasi printer yg Anda buat utk spooler %s ke %s, "
"spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, "
"lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan "
"ditransfer. \n"
"Tak semua antrian dapat ditransfer karena alasan berikut:\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Font List"
msgstr "Daftaf Font"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Gantilah bootdevice Open Firmware untuk mengaktifkan bootloader.\n"
" Jika Anda tak melihat prompt bootloader saat reboot, tekan\n"
" Command-Option-O-F saat reboot dan ketik:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" kemudian: shut-down\n"
"Anda akan melihat prompt bootloader pada boot selanjutnya."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
"Nampaknya Anda punya mesin kuno/tak dikenal.\n"
"Bootloader yaboot takkan bekerja.\n"
"Instalasi akan berlanjut, tapi Anda perlu memakai\n"
"BootX atau yg lain utk mem-boot mesin Anda"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "Pilih file"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr "Pilihlah jaringan/host yg ingin dipakai printer lokalnya:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Komando ini dapat Anda pakai dalam kotak \"Perintah cetak\" dialog cetak di "
"banyak aplikasi, tapi jangan berikan nama file di sini karena file yang "
"dicetak akan diberikan oleh aplikasi.\n"

#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "Jepang"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "Daftar opsi cetak"

#: ../../standalone/localedrake:1
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Country / Region"
msgstr "Negara"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "Cari Server"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr "Nama antrian NCP hilang!"

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr "Awas, koneksi internet lain terdeteksi, mungkin memakai jaringan Anda"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Label CD-ROM \"%s\""

#: ../../standalone/drakbackup:1
#, c-format
msgid "CDRW media"
msgstr "media CDRW"

#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Menyimpan dan mengembalikan pool entropi sistem untuk membuat\n"
"angka acak dengan kualitas sangat acak."

#: ../advertising/07-server.pl:1
#, c-format
msgid "Turn your computer into a reliable server"
msgstr "Jadikan mesin Anda server yang handal"

#: ../../security/l10n.pm:1
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr "Cek katasandi kosong di /etc/shadow"

#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr " (driver %s)"

#: ../../services.pm:1
#, c-format
msgid "Start when requested"
msgstr "Mulai bila diminta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"File loopback:\n"
"   %s\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "Saya tak tahu"

#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", host TCP/IP \"%s\", port %s"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak "
"berbahaya dan harus hati-hati digunakan.\n"
"\n"
"Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada "
"komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif "
"untuk mengubah nilainya.\n"
"\n"
"Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan\n"
"secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.\n"
"\n"
"Jalan terus?"

#: ../../keyboard.pm:1
#, c-format
msgid "Telugu"
msgstr "Telugu"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Kartu Anda kini memakai driver %s\"%s\" (driver standar kartu Anda adalah \"%"
"s\")"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Uninstall"
msgstr "Un-Instalasi Akhir"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connecting to Internet "
msgstr "Penghubungan ke Internet "

#: ../../standalone/scannerdrake:1
#, c-format
msgid " ("
msgstr " ("

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid level"
msgstr "Tingkat cpuid"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr " di server Novell \"%s\", printer \"%s\""

#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongol (cyrillic)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Add a module"
msgstr "tambah modul"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile to delete:"
msgstr "Profil yang hendak dihapus:"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Local measure"
msgstr "Ukuran lokal"

#: ../../network/network.pm:1
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr "Awas: alamat IP %s biasanya sudah dipesan !"

#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""
"        - Buat Image Etherboot:\n"
"        \t\tUtk mem-boot kernel via etherboot, image khusus kernel/initrd "
"harus dibuat.\n"
"        \t\tmkinitrd-net melakukan sebagian besar kerja, drakTermServ "
"hanyalah antarmuka grafis\n"
"        \t\tutk menolong manajemen/tuning image ini.\n"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "Login Account (nama pengguna)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Fdiv bug"
msgstr "Kutu FDIV"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"konfigurator drakfirewall\n"
"\n"
"Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg\n"
"drakconnect sebelum melanjutkan."

#: ../../security/l10n.pm:1
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr "Terima echo icmp tersiar"

#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr "Uruguay"

#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "Benin"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr " di server SMB/Mindows \"%s\", share \"%s\""

#: ../../standalone/drakperm:1
#, c-format
msgid "Path selection"
msgstr "Pilihan path"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Name/IP address of host:"
msgstr "Nama/alamat IP host:"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "Setting kebiasaan"

#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Ada yang aneh pada drive Anda,\n"
"pengecekan integritas data tak berakhir normal.\n"
"Artinya, data apapun yang ditulis ke situ akan rusak."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Nama host printer atau IP tidak ada!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Periksa semua pengguna yang ingin Anda masukkan ke backup."

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""
"%s harus dikonfigurasikan oleh printerdrake.\n"
"Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian "
"Hardware."

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Key isn't writable"
msgstr "XawTV tak diinstal"

#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (cable)"
msgstr "Jepang (kabel)"

#: ../../standalone/drakfont:1
#, c-format
msgid "Initial tests"
msgstr "Tes Awal"

#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "Lanjut"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom Restore"
msgstr "Restorasi pilihan sendiri"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Saturday"
msgstr "Sabtu"

#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""
"\"%s\": jika kartu suara terdeteksi di sistem Anda, ia ditampilkan\n"
"di sini. Jika kartu suara yg tampil tak sesuai dg yg ada di sistem, pilih\n"
"driver lain."

#: ../../security/help.pm:1
#, c-format
msgid "Set the root umask."
msgstr "Set umask root."

#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "Error saat membaca file %s"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "Script-based"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "setting PLL :"

#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Anda harus punya partisi FAT termount pada /boot/efi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " on "
msgstr " di "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL harus dimulai dg http:// atau https://"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Anda dapat menset langsung URI utk akses printer. URI harus memenuhi "
"spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua "
"spooler."

#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "OS Lain (SunOS...)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Install/Upgrade"
msgstr "Instal/Upgrade"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d paket"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Aplikasi Backup dan Restore\n"
"\n"
"--default             : simpan direktori default.\n"
"--debug               : tampilkan semua pesan debug.\n"
"--show-conf           : daftar file atau direktori yg di-backup.\n"
"--config-info         : jelaskan opsi file konfigurasi (utk pengguna non-"
"X).\n"
"--daemon              : pakai konfigurasi daemon.\n"
"--help                : tampilkan pesan ini.\n"
"--version             : tampilkan nomor versi.\n"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "Otentikasi Domain Dibutuhkan"

#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "Gunakan libsafe utk server"

#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "Islandia"

#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Pemakaian: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"Masukkan ukuran maximum\n"
" yg diizinkan utk Drakbackup"

#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "Mount melingkar %s\n"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo/grub mode"
msgstr "mode Lilo/Grub"

#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr "Martinique"

#: ../../standalone/drakbackup:1
#, c-format
msgid "HardDrive / NFS"
msgstr "HardDrive / NFS"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Old user list:\n"
msgstr "Daftar pengguna lama:\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Search Backups"
msgstr "Cari Backup"

#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "nomor"

#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "Swedia"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "Driver %s mana yang harus saya coba?"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "Anda akan diingatkan bila salah satu servis terhenti"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Weekday"
msgstr "Rabu"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "Tipe filesystem:"

#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr "Kepulauan Mariana Utara"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", alat multifungsi di HP JetDirect"

#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "tiada"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Nama profil yg akan dibuat (profil baru dibuat sbg salinan yg sekarang) :"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Floppy"
msgstr "Disket"

#: ../../standalone/drakfont:1
#, c-format
msgid "Ghostscript referencing"
msgstr "referensi Ghostscript"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Bootloader"
msgstr "Bootloader"

#: ../../security/l10n.pm:1
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr "Sahkan semua servis yg dikontrol oleh tcp_wrappers"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "Pindah"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader yang hendak digunakan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "Host server SMB"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Name Servers:"
msgstr "Server Nama:"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Minute"
msgstr "1 menit"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Peringatan\n"
"\n"
"Mohon dibaca dulu semua ketentuan di bawah. Bila Anda tidak setuju dengan "
"salah satu bagiannya\n"
"Anda tidak dapat menginstal media CD berikutnya. Silakan tekan 'Tolak' untuk "
"melanjutkan instalasi\n"
"tanpa menggunakan media ini.\n"
"\n"
"\n"
"Ada beberapa komponen yang ada di media CD berikutnya tidak dilepas dalam "
"lisensi GPL atau perjanjian\n"
"sejenis. Komponen-komponen itu diatur dalam ketentuan dan kondisi dalam "
"lisensi yang bersangkutan.\n"
"Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda menyebarkan "
"komponen tersebut.\n"
"Model lisensi tersebut akan melarang proses transfer, duplikasi (kecuali "
"untuk alasan backup), penyebaran\n"
"kembali, rekayasa ulang, de-assembly, de-kompilasi, atau modifikasi pada "
"komponen tersebut.\n"
"Tiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak Anda dalam "
"lisensi tersebut.\n"
"Kecuali bila dibolehkan, Anda tidak dapat menginstall program ini dalam "
"lebih dari satu sistem\n"
"atau menggunakannya di jaringan. Bila Anda masih ragu, silakan huibungi "
"langsung distributor\n"
"atau editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak "
"ketiga atau mengkopinya.\n"
"\n"
"\n"
"Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuatnya "
"masing-masing\n"
"dan dilindungi oleh hukum hak cipta dan hak intelektual khusus untuk program "
"komputer.\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Expert mode"
msgstr "Mode Ahli"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "Hapus printer ini dari Star Office/OpenOffice.org/GIMP"

#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server, digunakan utk membangun server dg performans dan\n"
"kapasitas tinggi."

#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr "Mikronesia"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 milyar warna (32 bit)"

#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr "Lisensi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Perlu waktu untuk membuat kunci"

#: ../../standalone/draksec:1
#, fuzzy, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The Security Administrator is the one who will receive security alerts if "
"the\n"
"'Security Alerts' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The Security Level menu allows you to select one of the six preconfigured "
"security levels\n"
"provided with msec. These levels range from poor security and ease of use, "
"to\n"
"paranoid config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""
"Setup tingkat keamanan dan administrator.\n"
"\n"
"\n"
"Administrator Keamanan adalah penerima pemberitahuan keamanan jika\n"
"opsi 'Pemberitahuan Keamanan' diset. Dapat berupa nama pengguna atau email.\n"
"\n"
"\n"
"Menu Tingkat Keamanan memungkinkan pemilihan satu di antara enam tingkat\n"
"keamanan yg disajikan msec. Level berkisar dari keamanan lemah (mudah "
"dipakai)\n"
"sampai level paranoid, cocok utk aplikasi server yg amat sensitif:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Lemah</span>: Benar2 tak aman, tapi amat "
"mudah\n"
"dipakai. Harus hanya dipakai pada mesin yg tak terhubung dg jaringan "
"manapun!\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standar</span>: Keamanan standar disarankan "
"utk\n"
"komputer yg terhubung ke Internet sbg klien.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Tinggi</span>: Ada beberapa pembatasan, dan\n"
"pengecekan otomatis dijalankan tiap malam.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Lebih Tinggi</span>: Cukup aman utk "
"menggunakan\n"
"sistem sbg server yg dapat menerima koneksi dari banyak klien. Jika mesin "
"Anda\n"
"hanya klien Internet, pilihlah level lebih rendah.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: Mirip dg level sebelumnya, "
"tapi\n"
"sistem ditutup sepenuhnya dan fitur keamanan adalah maximum"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr "Printer deteksi otomatis (Lokal, TCP/Socket, dan SMB)"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "usb Sagem (menggunakan pppoa)"

#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Error - tidak ada device yang valid untuk membuat filesystem baru. Periksa "
"kembali hardware untuk mencari penyebabnya"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Inisiasi sistem cetak pada saat boot"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Anda mau jalankan koneksi ini saat boot?"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Processor ID"
msgstr "ID prosesor"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr "Pemecahan masalah suara"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Polandia (layout qwerty)"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Add Printer"
msgstr "Printer"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Aktivitas drakbackup via CD:\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.\n"
"\n"
"Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan "
"memproses job cetak. Daemon ini juga dapat diakses oleh mesin remote via "
"network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit "
"daemon terpilih yg dijalankan dlm level sekuriti ini.\n"
"\n"
"Benarkah Anda ingin mengkonfigurasikan printer di mesin ini?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Host \"%s\", port %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Partisi ini tak bisa dipakai sebagai loopback"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "File sudah ada. Gunakan file ini ?"

#: ../../standalone/net_monitor:1
#, c-format
msgid "received: "
msgstr "diterima: "

#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "kunci Alt Kanan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "daftar driver alternatif untuk kartu suara ini"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway"
msgstr "Gateway"

#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr "Tunisia"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing"
msgstr "Sharing scanner"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "Klik device di pohon kiri utk menampilkan info-nya di sini."

#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid autologin."
msgstr "Izinkan/Larang autologin."

#: ../../standalone/drakxtv:1
#, c-format
msgid "XawTV isn't installed!"
msgstr "XawTV tak diinstal"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Tidak memasukkan file penting (passwd, group, fstab)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "old static device name used in dev package"
msgstr "nama alat statis lama yg dipakai di paket dev"

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr "Aktifkan pencatatan paket aneh IPv4"

#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "Label ini sudah dipakai"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Selamat Datang di Penolong Setup Printer\n"
"\n"
"Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini atau "
"jaringan.\n"
"\n"
"Jika Anda punya printer terhubung dg mesin ini, hubungkan dan nyalakan "
"sehingga ia/mereka dapat dideteksi. Juga printer jaringan harus terhubung "
"dan dinyalakan.\n"
"\n"
"Ingat, deteksi printer jaringan membutuhkan waktu lebih lama daripada "
"printer yg terhubung langsung dg mesin ini. Matikan deteksi printer jaringan "
"jika tak perlu.\n"
"\n"
" Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup "
"printer sekarang."

#: ../../keyboard.pm:1
#, c-format
msgid "Greek (polytonic)"
msgstr "Yunani (politonik)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Sehabis memformat partisi %s semua data pada partisi ini akan hilang"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection Time: "
msgstr "Waktu Koneksi:"

#: ../../standalone/livedrake:1
#, c-format
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Masukkan CDROM Instalasi di drive Anda dan tekan OK\n"
"Jika tak punya, tekan Batal untuk hindari upgrade live."

#: ../../standalone/drakperm:1
#, c-format
msgid "Use group id for execution"
msgstr "Gunakan id grup utk eksekusi"

#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "Pilih pengguna standar:"

#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer "
"ini akan secara otomatis dideteksi."

#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Anda dapat memilih bahasa lain yang akan tersedia seusai instalasi."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""
"Masukkan direktori (atau modul) utk\n"
" meletakkan backup di host ini."

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "Domain"

#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Ukuran RAM yg tepat (ditemukan %d MB)"

#: ../../help.pm:1
#, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader."
msgstr ""
"LILO dan grub adalah pemuat boot GNU/Linux. DrakX akan menganalisa sektor\n"
"boot disk dan bekerja menurut apa yg ditemukannya di sana:\n"
"\n"
" * jika ditemukan sektor boot Mindows, ia akan menggantinya dg sektor boot\n"
"grub/LILO. Dg demikian Anda akan dapat memuat GNU/Linux atau OS lain.\n"
"\n"
" * jika ditemukan sektor boot grub/LILO, ia akan menggantinya dg yg baru.\n"
"\n"
"Jika DrakX tak dapat mengambil keputusan, ia akan menanyakan tempat menaruh\n"
"bootloader."

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "DNS Provider 2 (boleh diisi boleh tidak)"

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Boot device"
msgstr "Device boot"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "partisi mana yang mau Anda ubah ukurannya?"

#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Amerika Serikat, kepulauan Luar Minor"

#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "Jibouti"

#: ../../standalone/logdrake:1
#, c-format
msgid "A tool to monitor your logs"
msgstr "Penampil log Anda"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "dideteksi pada port %s"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "Kartu grafis: %s\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/Set as _Default"
msgstr " (Default)"

#: ../../security/l10n.pm:1
#, c-format
msgid "Accept icmp echo"
msgstr "Terima mode icmp"

#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series"

#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Partisi extended tak bisa dipakai di platform ini"

#: ../../standalone/drakboot:1
#, c-format
msgid "Splash selection"
msgstr "Pilihan Splash"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "Konfigurasi ISDN"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "tinggi"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing"
msgstr "Pemakaian Bersama Koneksi Internet"

#: ../../standalone/logdrake:1
#, c-format
msgid "Choose file"
msgstr "Pilih file"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Summary: "
msgstr "Ringkasan"

#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Awas! Sudah ada konfigurasi firewall. Anda perlu mengecek dan membetulkan "
"secara manual setelah instalasi."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Cetak/Akses Kartu Foto di \"%s\""

#: ../../security/l10n.pm:1
#, c-format
msgid "Daily security check"
msgstr "Cek keamanan harian"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Anda ingin mengaktifkan pencetakan di printer tersebut di atas atau printer "
"di jaringan lokal?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer default settings"
msgstr "Setting default printer"

#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Mouse PS2 wheel generik"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write proctection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""
"Flag WP di register CR0 cpu memaksakan proteksi penulisan pada level halaman "
"memori, shg memungkinkan prosesor mencegah akses kernel ke memori pengguna "
"yg tak dicek (ini adalah penjaga bug)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Menghapus printer lama \"%s\"..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Select a device !"
msgstr "Pilih device !"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected server"
msgstr "Hapus server yg dipilih"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr "usb Sagem (menggunakan dhcp)"

#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "Perancis, Teritori Selatan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the processor"
msgstr "nama vendor prosesor"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""
"        - Rawat %s:\n"
"        \t\tAgar pengguna dapat login ke sistem dari klien diskless, entri\n"
"        \t\tdi /etc/shadow harus disalin ke %s. drakTermServ membantu\n"
"        \t\thal ini dg menambahkan/hapus pengguna sistem dari file ini."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Semua data pada partisi ini sebaiknya dibackup dulu"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "Instalasi paket %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "Pengecekan alat dan penyetelan HPOJ..."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Untuk menambahkan partisi, hapus satu agar dapat membuat partisi extended"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""
"Printer Anda telah dikonfigurasikan secara otomatis untuk mengakses drive "
"kartu foto dari PC Anda. Kini Anda dapat mengakses kartu foto Anda dg "
"program grafis \"MtoolsFM\" (Menu: \"Aplikasi\" -> \"Perkakas File\" -> "
"\"Manajer File MTools\") atau baris komando \"mtools\" (ketik \"man mtools\" "
"di baris komando utk info lebih lanjut). Anda temukan sistem file kartu di "
"drive \"p:\", atau huruf drive selanjutnya bila Anda punya lebih dari satu "
"printer HP dengan drive kartu foto. Di \"MtoolsFM\" Anda dapat men-switch "
"drive dg isian di sudut kanan atas daftar file."

#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "Paket yang akan diinstal"

#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "SEMUA partisi yang ada beserta data pada drive %s akan hilang"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "Tak cukup ruang untuk instalasi atau upgrade (%d > %d)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Tiap printer perlu nama (misalnya \"printer\"). Kolom Penjelasan / Lokasi "
"tak harus terisi. Itu komentar utk pengguna."

#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""
"\"%s\": klik \"%s\" utk membuka konfigurator printer. Baca\n"
"bab yg bersangkutan di ``Pedoman Pemula'' utk info lebih lanjut ttg cara\n"
"setup printer baru. Antarmuka yg ditampilkan di sana sama dg yg dipakai\n"
"saat instalasi."

#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "Bhutan"

#: ../../standalone/drakgw:1
#, c-format
msgid "Network interface"
msgstr "Antarmuka jaringan"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Pemutusan hubungan dari Internet gagal."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "Pembacaan data printer..."

#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "Keyboard Korea"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Not connected"
msgstr "Tak tersambung"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "No internet connection configured"
msgstr "konfigurasi koneksi Internet"

#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "Yunani"

#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Santa Kitts dan Nevis"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Mouse Generik 3 Tombol"

#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "Aktifkan boot dari OF?"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "JFS tak dapat dipakai utk partisi berukuran di bawah 16MB"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Hapus media RW (sesi pertama)"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "VertRefresh Monitor: %s\n"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "Posisi mount"

#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Ada error:\n"
"%s\n"
"Cobalah ganti parameternya"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ", host TCP/IP \"%s\", port %s"

#: ../../standalone/drakperm:1
#, c-format
msgid "User :"
msgstr "Pengguna :"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore system"
msgstr "Restorasi sistem"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr "Ini adalah mesin yg scanner lokalnya akan dibuat agar dapat dipakai:"

#: ../../standalone/drakpxe:1
#, c-format
msgid "The DHCP end ip"
msgstr "IP akhir DHCP"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "Yang lain"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "Colombia"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"Konfigurasi `%s':\n"
"\n"
"Network: %s\n"
"Alamat IP: %s\n"
"Atribut IP: %s\n"
"Driver: %s"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "Detil"

#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Untuk alasan keamanan, koneksi akan diputus sekarang."

#: ../../standalone/drakbug:1
#, c-format
msgid "Synchronization tool"
msgstr "Sinkronisator"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking your system..."
msgstr "Pengecekan sistem..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "Cetak"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Masukkan pita dengan label %s\n"
" ke drive pita device %s"

#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr "Mongolia"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "Telah di-mount\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configure CUPS"
msgstr "Konfigurasi X"

#: ../../help.pm:1
#, c-format
msgid "Graphical Interface"
msgstr "Antarmuka Grafis"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Users"
msgstr "Restorasi Pengguna"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Encryption key for %s"
msgstr "Kunci sandi utk %s"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Do you want to recover your system?"
msgstr "Ingin pakai aboot?"

#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti\n"
"NFS dan NIS. Server portmap harus jalan di mesin yang bertindak sebagai\n"
"server untuk protokol yang menggunakan mekanisme RPC."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detected hardware"
msgstr "Hardware terdeteksi"

#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr "Mauritius"

#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Myanmar (Burma)"

#: ../../fs.pm:1
#, c-format
msgid "Enabling swap partition %s"
msgstr "Aktifkan partisi swap %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "Tiada partisi FAT utk digunakan sbg loopback (atau tiada ruang cukup)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "Armenia (lama)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"Printer bernama \"%s\" telah ada di %s. \n"
"Klik \"Transfer\" untuk menindihnya.\n"
"Anda juga dapat menuliskan nama baru atau melewatkan printer ini."

#: ../advertising/12-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform."
msgstr "Temukan solusi problem via platform dukungan online MandrakeSoft"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", host \"%s\", port %s"

#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr "Monako"

#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "Proses partisi gagal: %s"

#: ../../fs.pm:1 ../../swap.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s proses format dari %s gagal"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Canada (cable)"
msgstr "Kanada (kabel)"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Floppy creation completed"
msgstr "Koneksi rampung."

#: ../../help.pm:1
#, c-format
msgid "Upgrade"
msgstr "Upgrade"

#: ../../help.pm:1
#, c-format
msgid "Workstation"
msgstr "Stasiunkerja"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instalasi paket %s\n"
"%d%%"

#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgistan"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on USB"
msgstr ", alat multifungsi di USB"

#: ../../../move/move.pm:1
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid "With basic documentation"
msgstr "Dengan dokumentasi dasar"

#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Skeduler command periodik, Anacron"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Pilih dulu partisi rootnya.\n"
"Caranya, buatlah partisi (atau pilih di yang sudah ada).\n"
"Lalu pilih ``Mount point'' dan set ke `/'"

#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr "Sahara Barat"

#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr "Proxy biasanya http://..."

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr "Afrika Selatan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Eject tape after the backup"
msgstr "Eject pita setelah backup"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Floppy Etherboot/ISO"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "Modifikasi konfigurasi printer"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "Pilih partisi"

#: ../../standalone/drakperm:1
#, c-format
msgid "Edit current rule"
msgstr "Edit aturan saat ini"

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s"
msgstr "%s"

#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "Silakan tes mouse Anda"

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Jangan update waktu akses inode di sistem file ini\n"
"(mis: utk akses lebih cepat di spool berita utk mempercepat server berita)."

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "3 buttons with Wheel emulation"
msgstr "Emulasi tombol"

#: ../../standalone/drakperm:1
#, c-format
msgid "Sticky-bit"
msgstr "Sticky-bit (bit-lengket)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Other Media"
msgstr "Media Lain"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup system files"
msgstr "Backup file sistem"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "Sektor"

#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: ../../any.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "Basis dn LDAP"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Paket ini tak dapat dipilih sebab tak ada ruang untuk menginstalnya"

#: ../../help.pm:1
#, c-format
msgid "generate auto-install floppy"
msgstr "buat disket instalasi otomatis"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "mode dial"

#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr "Pemakaian file bersama"

#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Hapus /tmp saat boot"

#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr "Malawi"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: false"
msgstr "konfigurasi lokal: salah"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "System settings"
msgstr "Setting kebiasaan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "Pilihlah tipe mouse Anda."

#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "sedang jalan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "class of hardware device"
msgstr "kelas alat hardware"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr "Mesin dan jaringan yg printer lokalnya dapat dipakai:"

#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "Inggris"

#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "Indonesia"

#: ../../standalone/draksec:1
#, c-format
msgid "default"
msgstr "standar"

#: ../../standalone/drakxtv:1
#, c-format
msgid "France [SECAM]"
msgstr "Perancis [SECAM]"

#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "batasi"

#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "harus ada"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS tak men-support printer server Novell atau printer yg mengirim data ke "
"perintah format-bebas.\n"

#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Command line"
msgstr "Perintah baris"

#: ../advertising/08-store.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies\", are available on our e-store:"
msgstr ""
"Solusi Linux lengkap, termasuk sajian khusus produk dan \"goodies\" lain, "
"tersedia online di e-store kami:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "March"
msgstr "Maret"

#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "akses ke file administratif"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""
"Error saat sendmail.\n"
"  Surat laporan Anda tak terkirim.\n"
"  Mohon konfigurasikan sendmail"

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"Tidak memberlakukan bit set-user-identifier atau set-group-identifier.\n"
"(Tampaknya aman, tapi sebenarnya lebih berbahaya jika Anda telah menginstal\n"
"suidperl(1).)"

#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: ../../help.pm:1
#, c-format
msgid "Automatic dependencies"
msgstr "Ketergantungan otomatis"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "Swap"

#: ../../standalone/drakperm:1
#, c-format
msgid "Custom settings"
msgstr "Setting kebiasaan"

#: ../../../move/move.pm:1
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Other"
msgstr "Restorasi Lain-lain"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "Kartu TV"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Printer di server SMB/windows 95/98/NT"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "/_Configure CUPS"
msgstr "Konfigurasi X"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ", "
msgstr ", "

#: ../../standalone/drakbug:1
#, c-format
msgid "Submit lspci"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove selected host/network"
msgstr "Hapus host/jaringan terpilih"

#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke "
"lain mesin."

#: ../../keyboard.pm:1
#, c-format
msgid "Uzbek (cyrillic)"
msgstr "Uzbek (cyrillic)"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Di sini Anda dapat memilih kunci atau kombinasinya untuk \n"
"berganti layout papanketik (mis: latin dan non latin)"

#: ../../network/network.pm:1
#, c-format
msgid "Network Hotplugging"
msgstr "Hotplugging Jaringan"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "jika diset ya, laporkan hasil cek ke tty."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From CD"
msgstr "Restorasi Dari CD"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Anda sedang membuat komputer Anda membagi koneksi Internetnya.\n"
"Dengan cara ini, komputer lain di jaringan lokal dapat memakai koneksi "
"Internet komputer ini.\n"
"\n"
"Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg "
"drakconnect sebelum pergi lebih jauh.\n"
"\n"
"Catatan: Anda mesti punya Adapter Jaringan untuk mensetup Jaringan Area "
"Lokal (LAN)."

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr "Akses kartu memori foto pada alat multifungsi HP Anda"

#: ../advertising/09-mdksecure.pl:1
#, c-format
msgid ""
"Enhance your computer performance with the help of a selection of partners "
"offering professional solutions compatible with Mandrake Linux"
msgstr "Maksimalkan kemampuan komputer Anda dg pertolongan partner profesional"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Authors: "
msgstr "Pengarang: "

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Internet Connection Sharing telah dimatikan"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr "jika ya, lakukan checksum file suid/sgid."

#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "Amerika Latin"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Japanese text printing mode"
msgstr "Mode cetak teks Jepang"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Old device file"
msgstr "File device lama"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "Info: "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "Tombol `%s': %s"

#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "Tunggu..."

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "None"
msgstr "Tiada"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "IP tak benar.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""
"Pastikan daemon cron masuk dalam daftar servis.\n"
"\n"
"Ingat bahwa kini semua media 'net' juga menggunakan harddisk."

#: ../../standalone/drakconnect:1
#, c-format
msgid "Ethernet Card"
msgstr "Kartu Ethernet"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Delete selected printer"
msgstr "Hapus aturan terpilih"

#: ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "Info"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "Instal"

#: ../../help.pm:1
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Klik \"%s\" jika Anda ingin menghapus semua data dan partisi yang ada \n"
"di harddisk ini. Awas, setelah mengklik \"%s\" Anda tak dapat \n"
"mengembalikan data dan partisi di drive ini termasuk data Mindows.\n"
"\n"
"Pilih \"%s\" utk membatalkan aksi ini tanpa kehilangan data dan partisi\n"
"yang ada dalam harddisk ini."

#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "Keluar dari proses instalasi"

#: ../../../move/move.pm:1
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Semuanya sudah dikonfigurasikan.\n"
"Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain "
"pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi "
"jaringan otomatis (DHCP)."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "Server CUPS remote"

#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "Mouse Sun"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:\n"
"\n"
"%s\n"
"\n"
"Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?"

#: ../../standalone/drakbug:1
#, c-format
msgid "Submit cpuinfo"
msgstr ""

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "Instalasi minimal"

#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "Ethiopia"

#: ../../standalone/drakbackup:1
#, c-format
msgid "YES"
msgstr ""

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr "Aktifkan \"crontab\" dan \"at\" utk pengguna"

#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr "Devanagari"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- alat pci : slot PCI, alat dan fungsi kartu ini\n"
"- alat eide: alat adalah majikan atau budak\n"
"- alat scsi: bus scsi dan id alat scsi"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Ukuran total: %d / %d MB"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "disabled"
msgstr "telah dimatikan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Search for new scanners"
msgstr "Cari scanner baru"

#: ../../standalone/drakgw:1
#, c-format
msgid "Disabling servers..."
msgstr "Server-server sedang dimatikan"

#: ../../standalone/drakboot:1
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Instalasi %s gagal. Ada kesalahan berikut:"

#: ../../standalone/drakboot:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "Tak dapat meluncurkan mkinitrd -f /boot/initrd-%s.img %s."

#: ../../install_any.pm:1
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Anda memilih server berikut: %s\n"
"\n"
"\n"
"Server ini aktif jika dibiarkan. Sementara ini tiada kabar ttg sekuritas,\n"
"tapi jika ada yg baru ditemukan, upgrade-lah selekas mungkin.\n"
"\n"
"\n"
"Jadi instal server ini?\n"

#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Printer jaringan (TCP/Socket)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup User files..."
msgstr "Backup file pengguna..."

#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "Instal sistem"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "Server DNS Primer (boleh diisi/tidak)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr "Abg alternatif, Anda dapat menentukan nama device/file"

#: ../../security/help.pm:1
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"Jika SERVER_LEVEL (atau SECURE_LEVEL jika tidak ada) lebih besar daripada 3\n"
"di /etc/security/msec/security.conf, buat symlink /etc/security/msec/server\n"
"merujuk /etc/security/msec/server.<SERVER_LEVEL>. \n"
"\n"
"/etc/security/msec/server dipakai oleh chkconfig --add utk menambahkan\n"
"servis jika terdapat di file selama instalasi paket."

#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Phonetic)"
msgstr "Rusia (fonetik)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "dhcpd Config..."
msgstr "Konfig dhcpd..."

#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalasi LILO/grub"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "Ibrani"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Printer \"%s\" di server \"%s\""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr "Disket dapat dilepas sekarang"

#: ../../help.pm:1
#, c-format
msgid "Truly minimal install"
msgstr "Instalasi paling minimal"

#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "Denmark"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "Memindahkan partisi..."

#: ../../standalone/drakgw:1
#, c-format
msgid "(This) DHCP Server IP"
msgstr "IP Server DHCP (Ini)"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "Tes konfigurasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing %s ..."
msgstr "Instalasi %s ..."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each other such\n"
"that installation of a package requires that some other program is also\n"
"rerquired to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"Jika Anda memilih paket sendiri, Anda akan diberi daftar paket terkelompok\n"
"dg grup/subgrup. Anda dapat memilih semua grup, subgrup, atau paket\n"
"tersendiri.\n"
"\n"
"Tiap kali Anda memilih paket, penjelasan muncul di sisi kanan.\n"
"\n"
"!! Jika paket server terpilih dg sengaja atau karena merupakan bagian suatu\n"
"grup besar, akan ada pertanyaan konfirmasi instalasi paket tersebut. Pada\n"
"Mandrake Linux, secara default semua server terinstal dijalankan saat boot.\n"
"Meski aman saat distribusi diluncurkan, ada kemungkinan lubang keamanan\n"
"ditemukan setelah versi Mandrake Linux ini rampung. Jika Anda tak tahu apa\n"
"yg dilakukan oleh suatu servis atau mengapa ia diinstal, klik \"Tidak\".\n"
"Jika Anda menekan \"Ya\" servis terdaftar akan diinstal dan akan dijalankan\n"
"secara otomatis. !!\n"
"\n"
"Opsi \"Ketergantungan otomatis\" mematikan dialog yg muncul tiap kali\n"
"instalator memilih suatu paket scr otomatis. Ini terjadi karena\n"
"beberapa paket memerlukan paket lain agar dapat bekerja.\n"
"\n"
"Ikon disket di dasar list memungkinkan pemuatan daftar paket yg diinstal\n"
"pada instalasi sebelumnya. Jika diklik, Anda akan diminta memasukkan disket\n"
"yg dibuat pd akhir instalasi yg lalu. Lihat tip kedua di step terakhir utk\n"
"membuat floppy tersebut."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Pilih kunci sandi sistem file Anda"

#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr "Sierra Leone"

#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: ../../standalone/draksec:1
#, c-format
msgid "(default value: %s)"
msgstr "(nilai standar: %s)"

#: ../../security/help.pm:1
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr "Set umur katasandi \"max\" hari dan delay \"inactice\"."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Halaman tes alternatif (Letter)"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""
"Konfigurasi Server DHCP\n"
"\n"
"Di sini Anda dapat memilih opsi konfigurasi server DHCP.\n"
"Jika Anda tak tahu arti opsi, tinggalkan apa adanya.\n"
"\n"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Choose an X server"
msgstr "Pilih server X"

#: ../../../move/tree/mdk_totem:1
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "Ukuran partisi swap dalam MB: "

#: ../../standalone/drakbackup:1
#, c-format
msgid "No changes to backup!"
msgstr "Tak ada perubahan backup!"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "Telah diformat\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "Tipe instalasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Printer \"%s\" di server SMB/Windows \"%s\""

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr "%d bilangan terpisah koma\""

#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa\n"
"yang lagi login di jaringan."

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Konfigurasi Step Otomatis"

#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: ../advertising/02-community.pl:1
#, c-format
msgid ""
"Want to know more and to contribute to the Open Source community? Get "
"involved in the Free Software world!"
msgstr ""
"Ingin tahu lebih tentang komunitas Open Source? Gabung dunia Perangkat Lunak "
"Bebas!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to backup..."
msgstr "Pilih data backup..."

#: ../../standalone/net_monitor:1
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""
"Koneksi gagal.\n"
"Periksa konfigurasi Anda di Pusat Kontrol Mandrake."

#: ../../standalone/net_monitor:1
#, c-format
msgid "received"
msgstr "diterima"

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr "Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_New"
msgstr "/File/B_aru"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DNS Server IP"
msgstr "IP Server DNS"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "IP Range End:"
msgstr "Akhir Kisaran IP:"

#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "Kuat"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Add a new printer to the system"
msgstr "Tambah pengguna ke sistem"

#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: ../../standalone/harddrake2:1
#, c-format
msgid "this field describes the device"
msgstr "penjelasan device"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "Penambahan printer ke Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "Printer Lokal"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Installation image directory"
msgstr "Direktori image instalasi"

#: ../../any.pm:1
#, c-format
msgid "NIS Server"
msgstr "Server NIS"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Port: %s"
msgstr "Port: %s"

#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr "Spanyol"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "local config: %s"
msgstr "konfigurasi lokal: %s"

#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "Pengguna ini sudah ada sebelumnya"

#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "Pilih file"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Apply"
msgstr "Terapkan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Auto-detect available ports"
msgstr "Deteksi otomatis port tersedia"

#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Internet Connection Sharing masih dimatikan"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "Belgia"

#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "Kuwait"

#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "Pilih manajer window yg akan dipakai:"

#: ../../standalone/drakbackup:1
#, c-format
msgid "December"
msgstr "Desember"

#: ../../standalone/harddrake2:1
#, c-format
msgid "sub generation of the cpu"
msgstr "subgenerasi cpu"

#: ../../standalone/drakbug:1
#, c-format
msgid "First Time Wizard"
msgstr "Penolong Kali Pertama"

#: ../../lang.pm:1
#, c-format
msgid "Taiwan"
msgstr "Taiwan"

#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: ../../standalone/logdrake:1
#, c-format
msgid "please wait, parsing file: %s"
msgstr "tunggu, sedang menelaah file: %s"

#: ../../install_steps.pm:1 ../../../move/move.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Ada error, tapi cara mengatasinya tak diketahui.\n"
"Jalan terus tapi resiko tanggung sendiri."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Importance: "
msgstr "Derajat kepentingan: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Agar dapat mencetak dg Lexmark inkjet dan konfigurasi ini, Anda perlu driver "
"printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). Klik link "
"\"Drivers\". Pilih model Anda lalu sistem operasi \"Linux\". Driver "
"disediakan berupa paket RPM atau shell script dg instalasi grafis "
"interaktif. Anda tak perlu melakukan konfigurasi via frontend grafis ini. "
"Batalkan langsung setelah persetujuan lisensi. Lalu cetak halaman printhead "
"alignment dg \"lexmarkmaintain\" dan cocokkan setting head alignment dg "
"program ini."

#: ../../standalone/drakperm:1
#, c-format
msgid "Permissions"
msgstr "Izin"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Nama provider (misalnya provider.net.id)"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Sumber daya sistem Anda rendah. Nantinya Anda akan sulit menginstal\n"
"Linux-Mandrake. Cobalah instalasi text. Untuk hal ini silakan\n"
"tekan `F1' saat booting pada CDROM, lalu ketikkan `text'."

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Gunakan partisi Mindows untuk loopback"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "Armenia (mesintik)"

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connection type: "
msgstr "Tipe koneksi"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Graphical interface"
msgstr "Antarmuka grafis"

#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "Chad"

#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "India"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s dengan akselerasi hardware 3D"

#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr "Slovakia"

#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr "Singapura"

#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "Kamboja"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "HorizSync Monitor: %s\n"

#: ../../standalone/drakperm:1
#, c-format
msgid "Path"
msgstr "Path"

#: ../../standalone/drakbug:1
#, c-format
msgid "NOT FOUND"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Anda dapat menentukan perintah sebarang tempat job di-pipe-kan sbg ganti "
"pengiriman langsung ke printer."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Sistem cetak (%s) takkan otomatis jalan saat mesin diboot.\n"
"\n"
"Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, "
"karena sistem cetak potensial diserang.\n"
"\n"
"Anda ingin auto-start sistem cetak dinyalakan lagi?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Printer %s\n"
"Apa yg Anda inginkan utk modifikasi printer ini?"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add host"
msgstr "Tambah host"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Jika Anda tahu pasti driver yg cocok utk kartu Anda ambillah salah satu\n"
"dari daftar di atas.\n"
"\n"
"Driver kartu suara \"%s\" Anda kini adalah \"%s\""

#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Bolehkah pengguna mengekspor direktori di home mereka?\n"
"Jika diizinkan, pengguna akan dapat meng-klik \"Share\" di konqueror and "
"nautilus.\n"
"\n"
"\"Custom\" memungkinkan tuning masing-masing pengguna.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Pilih muat/simpan seleksi paket di floppy.\n"
"Formatnya sama dengan floppy buatan auto_install."

#: ../../../move/tree/mdk_totem:1
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Support radio :"

#: ../../standalone/drakxtv:1
#, c-format
msgid "China (broadcast)"
msgstr "Cina (siaran)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use quota for backup files."
msgstr "Pakai quota utk file backup."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Konfigurasikan printer \"%s\"..."

#: ../../fs.pm:1
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Jangan izinkan eksekusi biner di sistem file ter-mount. Opsi ini berguna\n"
"bagi server yg punya sistem file berisi biner utk arsitektur berbeda."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "Koneksi Internet"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Module %s gagal diload.\n"
"Mau coba lagi dengan parameter yang lain?"

#: ../advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world."
msgstr "Selamat datang di dunia Source Terbuka"

#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnia Herzegovina"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Anda perlu filesystem yg benar (ext2, reiserfs, xfs, atau jfs) utk titik "
"mount ini\n"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Masukkan nama host atau alamat IP.\n"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "Belanda"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sending files by FTP"
msgstr "Kirim file dg FTP"

#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr "Kartu ISDN internal"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Tak diketahui adanya driver alternatif OSS/ALSA utk kartu suara Anda (%s) yg "
"kini memakai \"%s\""

#: ../../network/modem.pm:1
#, c-format
msgid "Title"
msgstr "Judul"

#: ../../standalone/drakfont:1
#, c-format
msgid "Install & convert Fonts"
msgstr "Instal & konversikan Font"

#: ../../standalone/drakbackup:1
#, c-format
msgid "WARNING"
msgstr "PERINGATAN"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "Instalasi bootloader"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "replay"
msgstr "ulang"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr "%s telah terdeteksi"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Expect is an extension to the Tcl scripting language that allows interactive "
"sessions without user intervention."
msgstr ""
"Expect adalah kepanjangan bahasa skrip Tcl yg memungkinkan sesi interaktif "
"tanpa intervensi pengguna."

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Virgin Islands (Amerika)"

#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr "File backup rusak"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Konfigurasi Sharing Koneksi Internet telah seleasi.\n"
"Namun sekarang masih dimatikan.\n"
"\n"
"Apa yang ingin Anda lakukan?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "Masukkan alamat IP dan port host yg ingin Anda pakai printernya."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Pipe into command"
msgstr "Pipe ke perintah"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Ada hardware di komputer ini yang membutuhkan driver ``proprietary''.\n"
"Anda bisa mencari informasinya di: %s"

#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "Haiti"

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "Deteksi device..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Penjelasan isian:\n"
"\n"

#: ../../standalone/draksec:1
#, c-format
msgid "Basic options"
msgstr "Opsi dasar"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the name of the CPU"
msgstr "nama CPU"

#: ../../security/l10n.pm:1
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr "Terima pesan error IPv4 yg tak benar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "Penyegaran data printer..."

#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "Anda harus juga memformat %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Hati-hati: operasi ini berbahaya"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Masukkan disket yg berisi seleksi paket"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "Server: "

#: ../../standalone/draksec:1
#, c-format
msgid "Security Alerts:"
msgstr "Pemberitahuan Keamanan:"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "Swedia"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Expect for SSH"
msgstr "Pakai Expect utk SSH"

#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr "Polandia"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "Port lain"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "Jumlah buffer penangkap utk penangkapan mmap"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid " - detected"
msgstr "terdeteksi"

#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr "Pengontrol SMBus"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Timeout koneksi (detik)"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Beberapa chip i486DX-100 tak dapat kembali ke mode operasi setelah perintah "
"\"halt\" digunakan"

#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "Kroasia"

#: ../../help.pm:1
#, c-format
msgid "Use existing partition"
msgstr "Pakai partisi yang sudah ada"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Gagal hubungi mirror %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "/Help/_About..."
msgstr "/Help/_About..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remove user directories before restore."
msgstr "Hapus direktori pengguna sebelum restorasi."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses "
"jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan "
"tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda "
"konfigurasikan sekarang. Bagaimana Anda mau teruskan?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS printer configuration"
msgstr "Konfigurasi printer CUPS"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font in your mounted partitions"
msgstr "tak ditemukan font di partisi termount"

#: ../../standalone/harddrake2:1
#, c-format
msgid "F00f bug"
msgstr "Kutu F00F"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Domain Name:"
msgstr "Nama domain:"

#: ../../security/l10n.pm:1
#, c-format
msgid "Root umask"
msgstr "Umask root"

#: ../../any.pm:1
#, c-format
msgid "On Floppy"
msgstr "Di disket"

#: ../../security/l10n.pm:1
#, c-format
msgid "Reboot by the console user"
msgstr "Reboot oleh pengguna konsol"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore"
msgstr "Restorasi"

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "Server:"
msgstr "Server: "

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr "jika ya, cek apakah piranti jaringan berada dalam modus promiscuous."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "Sedang mencari paket yang tersedia..."

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Tunggu, tingkat keamanan sedang diset..."

#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "Pesan Init"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "Selamatkan tabel partisi"

#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "Kipros"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connection complete."
msgstr "Koneksi rampung."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "Hapus dari RAID"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "Katasandi ini terlalu mudah (harus paling tidak %d karakter)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Configuration Wizards"
msgstr "Dukun Konfigurasi"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "Konfigurasi koneksi ISDN"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: ../../standalone/harddrake2:1
#, c-format
msgid "primary"
msgstr "primer"

#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr " di server SMB/Mindows \"%s\", share \"%s\""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Kini Anda boleh pilih servis mana yang dijalankan saat boot.\n"
"\n"
"Di sini ditampilkan semua servis yg tersedia di instalasi ini. Periksa dg\n"
"baik dan jangan tandai servis yg tak selalu diperlukan saat boot.\n"
"\n"
"Ada penjelasan singkat bila suatu servis dipilih. Tapi jika Anda tak yakin\n"
"kegunaan servis tsb., lebih aman tak usah diusik.\n"
"\n"
"Pada tahap ini, hati-hati jika Anda bermaksud menjadikan mesin Anda sebuah\n"
"server: Anda mungkin tak ingin menjalankan servis yg tak diperlukan. Ingat,\n"
"bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya\n"
"servis yang benar-benar Anda perlukan."

#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr "Niue"

#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "Lewati"

#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala\n"
"pada saat boot."

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"Frekuensi CPU dlm MHz (jumlah instruksi perdetik yg dapat dieksekusi oleh "
"CPU)"

#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "penting"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Mandrake Linux Printer Management Tool"
msgstr "Manajer Pengguna Linux Mandrake"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Total Progress"
msgstr "Total Kemajuan"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n"
"SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n"
"meng-instal driver yang sesuai.\n"
"\n"
"Karena perangkat keras terkadang tak terdeteksi, DrakX mungkin gagal\n"
"mendeteksi harddisk Anda. Jika demikian, tentukan sendiri hardware Anda.\n"
"\n"
"Jika Anda harus menentukan adaptor SCSI PCI secara manual, DrakX akan\n"
"menanyakan opsi konfigurasinya. DrakX akan mem-probe hardware utk "
"menentukan\n"
"opsi spesifik hardware yg diperlukan utk menyalakan adaptor. DrakX biasanya\n"
"melakukan ini tanpa banyak basa-basi.\n"
"\n"
"Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu memberikan\n"
"opsi ke driver secara manual."

#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Users"
msgstr "Pengguna"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "Membuat bootloader"

#: ../../../move/move.pm:1
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gateway (mis. %s)"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "Katasandi tidak sama"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Contoh IP yg benar:\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr "Pilih media backup."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Frequency (MHz)"
msgstr "Frekuensi (MHz)"

#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah "
"instalasi dengan pilihan ''linux defcfg=floppy''"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of the processor"
msgstr "nomor prosesor"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Jam hardware diset ke GMT"

#: ../../network/isdn.pm:1
#, c-format
msgid "Do you want to start a new configuration ?"
msgstr "Ingin jalankan konfigurasi baru?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "Berikan nama file"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Pilihlah port tempat printer Anda terhubung."

#: ../../standalone/livedrake:1
#, c-format
msgid "Change Cd-Rom"
msgstr "Ganti Cd-Rom"

#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr "Paraguay"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "Konfigurasi selesai, terapkan setting-nya?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr "Pakai Backup Incremental/Diferensial (tak menghapus backup lama)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""
"        - Rawat /etc/dhcpd.conf:\n"
"        \t\tUtk me-net_boot klien, tiap klien perlu entri dhcpd.conf, "
"menunjuk alamat IP\n"
"        \t\tdan image net boot ke mesin. drakTermServ menolong membuat/hapus "
"entri ini.\n"
"\t\t\t\n"
"        \t\t(Kartu PCI mungkin mengabaikan image - etherboot akan meminta "
"image yg benar. Ingat\n"
"        \t\tbila etherboot mencari images, ia mengharap nama seperti\n"
"        \t\tboot-3c59x.nbi, bukan boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tContoh dhcpd.conf yg men-support klien diskless:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Tak diketahui adanya driver utk kartu suara Anda (%s)"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "force"
msgstr "paksa"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "Keluar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"CATATAN: Akan diinstal piranti lunak tambahan hingga %d MB tergantung model "
"printer dan sistem cetak."

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Tiada antarmuka terkonfigurasi.\n"
"Konfigurasikan dulu dg meng-klik 'Configure'"

#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "Estonia"

#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file\n"
"HTML dan CGI."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""
"Masukkan nama device Penulis CD Anda\n"
" mis: 0,1,0"

#: ../../standalone/draksec:1
#, c-format
msgid "ALL"
msgstr "SEMUA"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Clients"
msgstr "Tambah/Hapus Klien DHCP"

#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "Pilih interface jaringan"

#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown Model"
msgstr "Model Tak Dikenal"

#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr "Pembakar CD/DVD"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partisi di-boot secara default\n"
"    (untuk MS-DOS boot, bukan untuk lilo)\n"

#: ../../standalone/drakperm:1
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr "Izinkan \"%s\" membaca file"

#: ../../standalone/draksplash:1
#, c-format
msgid "choose image"
msgstr "pilih image"

#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Konfigurasi firewall terdeteksi!"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "Nama koneksi"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""
"koordinat x kotak\n"
"teks (jumlah huruf)"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "Update pilihan paket"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "File loopback %s akan di-mount ke mana?"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr "Floppy sukses dibuat. Instalasi bisa direplikasi."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Pakai CD/DVDROM utk backup"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the number of buttons the mouse has"
msgstr "jumlah tombol mouse"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "Ulang"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup other files"
msgstr "Backup file lain"

#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "Tidak ada floppy drive"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files are corrupted"
msgstr "File backup rusak"

#: ../../standalone/drakxtv:1
#, c-format
msgid "TV norm:"
msgstr "standar TV :"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Cpuid family"
msgstr "Keluarga cpuid"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: thin"
msgstr "tipe: tipis"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Lithuania AZERTY (baru)"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr "ya artinya koprosesor aritmetik punya vektor eksepsi"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Anda telah memilih partisi RAID software sebagai root (/).\n"
"Tanpa partisi /boot, bootloader tak dapat berbuat apa-apa.\n"
"Hati-hati dalam menambahkan partisi /boot"

#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "OS Lain (MacOS...)"

#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "Untuk mengaktifkan mouse,"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "Aktifkan jaringan"

#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Screenshot akan tersedia setelah instal di %s"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose which one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Ada lebih dari satu partisi wicrosoft mindows terdeteksi pada harddisk\n"
"Anda. Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem\n"
"operasi Linux Mandrake.\n"
"\n"
"Tiap partisi terdaftar sbb: \"Nama Linux\",\"Nama windows\",\"Kapasitas\".\n"
"\n"
"\"Nama Linux\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
"\"nomor partisi\" (misalnya \"hda1\").\n"
"\n"
"\"Tipe hard drive\" adalah \"hd\" bila drive bertipe IDE dan \"sd\" jika\n"
"berupa drive SCSI.\n"
"\n"
"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Jika\n"
"berupa IDE, maka:\n"
"\n"
" * \"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
"\n"
" * \"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
"\n"
" * \"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
"\n"
" * \"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
"\n"
"Pada drive SCSI, \"a\" berarti \"ID SCSI terkecil, \"b\" berarti \"ID SCSI\n"
"terkecil kedua\", dst.\n"
"\n"
"\"Nama windows\" adalah huruf hard drive Anda pada windows (disk pertama\n"
"pada partisi disebut \"C:\")."

#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr "Tanzania"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Sedang menghitung bound filesystem FAT"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Sumber Backup: \n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "custom"
msgstr "Custom"

#: ../../standalone/logdrake:1
#, c-format
msgid "Content of the file"
msgstr "Isi file"

#: ../../any.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "Otentikasi LDAP"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "in order to keep %s"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr "Akan kuambil sebarang driver"

#: ../../standalone/net_monitor:1
#, c-format
msgid "transmitted"
msgstr "dipancarkan"

#: ../../lang.pm:1
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr "%d string terpisah koma"

#: ../../network/netconnect.pm:1
#, c-format
msgid " isdn"
msgstr " isdn"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Ini adalah daftar papanketik yang tersedia"

#: ../../standalone/draksplash:1
#, c-format
msgid "Theme name"
msgstr "Nama tema"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Help"
msgstr "/_Tolong"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Pilih sebarang driver"

#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "Kepulauan Cook"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""
"Anda dapat memutuskan di sini apakah scanner yg terhubung di mesin ini dapat "
"diakses oleh mesin lain dan oleh mesin mana."

#: ../../standalone/draksplash:1
#, c-format
msgid "the width of the progress bar"
msgstr "lebar papan perkembangan"

#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "Melakukan format partisi %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Hostname required"
msgstr "Nama Host dibutuhkan"

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselect fonts installed"
msgstr "Tak pilih font yg sudah diinstal"

#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "Wheel"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Submit kernel version"
msgstr "versi kernel"

#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/drakperm:1 ../../standalone/draksec:1
#: ../../standalone/logdrake:1 ../../standalone/mousedrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "Batal"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for configured scanners ..."
msgstr "Cari scanner terkonfigurasi ..."

#: ../../harddrake/data.pm:1
#, c-format
msgid "Videocard"
msgstr "Kartu Video"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tBackup dengan tar dan bzip2\n"

#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Remove Selected"
msgstr "Hapus Pilihan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _modems"
msgstr "/Deteksi otomatis _modem"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "Hapus printer"

#: ../../standalone/drakbackup:1
#, c-format
msgid "View Last Log"
msgstr "Lihat Log Terakhir"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Layanan apa yg Anda suka untuk akses dari Internet?"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Connection Type"
msgstr "Tipe koneksi :"

#: ../../standalone/logdrake:1
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Selamat datang di konfigurator mail.\n"
"\n"
"Anda dapat mengeset sistem peringatan.\n"

#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakperm:1
#, c-format
msgid "Other"
msgstr "Lainnya"

#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Default"
msgstr "Default"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulasi tombol 2"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Please enter a package name."
msgstr "Silakan tulis nama pengguna"

#: ../../security/l10n.pm:1
#, c-format
msgid "Run chkrootkit checks"
msgstr "Jalankan cek chkrootkit"

#: ../../standalone/drakfont:1
#, c-format
msgid "type1inst building"
msgstr "bangun type1inst"

#: ../../standalone/drakfont:1
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: ../../standalone/draksplash:1
#, c-format
msgid "choose image file"
msgstr "pilih file image"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "Server X"

#: ../../any.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "Nama Pengguna Admin Domain"

#: ../../standalone/drakxtv:1
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Ada error saat men-scan kanal TV"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "Keyboard US (internasional)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Not installed"
msgstr "Tak terinstal"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Kedua kunci Alt bersamaan"

#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "koneksi LAN"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/-"
msgstr "/File/-"

#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "Itali"

#: ../../interactive.pm:1
#, c-format
msgid "Basic"
msgstr "Biasa"

#: ../../install_messages.pm:1
#, c-format
msgid "http://www.mandrakelinux.com/en/92errata.php3"
msgstr "http://www.mandrakelinux.com/en/92errata.php3"

#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: ../../help.pm:1
#, c-format
msgid "pdq"
msgstr "pdq"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "IO kartu"

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "Samba server"
msgstr "Server Samba"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"partisi ini adalah partisi bootstrap\n"
"yang khusus digunakan \n"
"oleh sistem dual boot.\n"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Dapat juga scanner di mesin remote dibuat agar dapat dipakai di mesin ini."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Network dg FTP.\n"

#: ../../security/l10n.pm:1
#, c-format
msgid "Reports check result to tty"
msgstr "Laporkan hasil cek ke tty"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr "Masukkan nama device atau file!"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_Quit"
msgstr "/_Keluar"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memori grafis: %s KB\n"

#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Program ini gratis; Anda dapat menyebar ulang dan/atau mengubahnya\n"
"sesuai Lisensi Publik Umum GNU dari Free Software Foundation; baik\n"
"versi 2, atau yang lebih baru.\n"
"\n"
"Program ini disebar agar dapat digunakan, tapi TANPA GARANSI APAPUN; bahkan\n"
"tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n"
"TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n"
"\n"
"Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n"
"ini; jika tidak, tulis ke Free Software Foundation, Inc., \n"
"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"

#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "akses ke peralatan kompilasi"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Global statistics"
msgstr "Statistik"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select data to restore..."
msgstr "Pilih data utk direstorasi..."

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Jika Anda ingin pakai aboot, sisakan ruang (cukup 2048 sektor) di awal disk"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "Halaman tes standar"

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "Time Zone"
msgstr "Zonawaktu"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "Buat"

#: ../../standalone/drakbackup:1
#, c-format
msgid "What"
msgstr "Apa"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "Ada error mengurutkan paket:"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Bulgaria (BDS)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Server"
msgstr "Pasifkan Server"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "Kunci sandi sistem file"

#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr "Gujarat"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable xdmcp. Since there are "
"security issues in \n"
"        using xdmcp, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""
"\t\t\tAnda dapat memakai pool alamat IP, bukannya satu entri perklien dg\n"
"\t\t\talamat tetap, dg menggunakan fungsi file konfigurasi spesifik-klien\n"
"\t\t\tyg disajikan oleh ClusterNFS.\n"
"\t\t\t\n"
"\t\t\tCatatan: Entri \"#type\" hanya dipakai oleh drakTermServ. Klien dapat "
"berupa \"kurus\"\n"
"\t\t\tatau 'gemuk'. Klien kurus menjalankan sebagian besar software di "
"server via xdmcp, sementara klien gemuk menjalankan sebagian besar\n"
"\t\t\tsoftware di mesin klien. Pada inittab khusus, %s akan\n"
"\t\t\tditulis utk klien kurus. File konfigurasi sistem xdm-config, kdmrc, "
"gdm.conf dimodifikasi\n"
"\t\t\tjika klien kurus digunakan, utk mengaktifkan xdmcp. Karena ada masalah "
"keamanan dlm penggunaan xdmcp,\n"
"\t\t\thosts.deny dan hosts.allow dimodifikasi utk membatasi akses ke subnet "
"lokal.\n"
"\t\t\t\n"
"\t\t\tCatatan: Lakukan stop/start server setelah menambahkan/mengubah klien."

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Pilihlah nomor pertama dari 10-range yang ingin Anda edit,\n"
"atau tekan Enter untuk melanjutkan.\n"
"Pilihan Anda? "

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict@mandrakesoft.com\n"
"\n"
msgstr ""
"\n"
" Hak cipta (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict@mandrakesoft.com\n"
"\n"

#: ../../standalone/draksplash:1
#, c-format
msgid "Save theme"
msgstr "Simpan tema"

#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "Brazil"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install"
msgstr "Instalasi Otomatis"

#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "Wizard Konfigurasi Jaringan"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "Mount otomatis media lepas"

#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "Pencetakan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Enter the directory to save:"
msgstr "Direktori penyimpanan:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "Tiada printer yg ditemukan terhubung langsung ke mesin Anda"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "Membuat partisi baru"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "Driver:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "unknown"
msgstr "tak dikenal"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "gunakan fdisk"

#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "GERAKKAN RODANYA!"

#: ../../standalone/net_monitor:1
#, c-format
msgid "sent: "
msgstr "dikirimkan: "

#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "IP otomatis"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"Instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n"
"\"Lanjut ->\" utk reboot. Yg akan Anda lihat pertama kali setelah tes "
"hardware\n"
"adalah menu bootloader; di sana Anda dapat memilih sistem operasi yg akan\n"
"dijalankan.\n"
"\n"
"Tombol \"Tambahan\" menampilkan 2 tombol utk:\n"
"\n"
" * \"Membuat disket instalasi otomatis\": utk membuat disket instalasi yang\n"
"akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg\n"
"instalasi yang baru Anda konfigurasikan.\n"
"\n"
"   Ada dua opsi setelah tombol di-klik:\n"
"\n"
"    * \"Ulang\". Instalasi semi-otomatis, hanya proses partisi yang tetap\n"
"interaktif.\n"
"\n"
"    * \"Otomatis\". Instalasi otomatis penuh: harddisk ditulis ulang\n"
"seluruhnya, semua data hilang.\n"
"\n"
"   Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi sama.\n"
"Lihat pasal Auto install di situs web kami.\n"
"\n"
" * \"Simpan pilihan paket\"(*): simpan pilihan paket seperti yang dibuat\n"
"sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke driver\n"
"dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu ketik\n"
">>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, jalankan\n"
"\"mformat a:\")"

#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr "Moldova"

#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "Konfigurasi printer remote"

#: ../advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "An online platform to respond to enterprise support needs."
msgstr "Platform online yang melayani kebutuhan support spesifik perusahaan"

#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Url harus berawalan 'ftp:' atau  'http:'"

#: ../../keyboard.pm:1
#, c-format
msgid "Oriya"
msgstr "Oriya"

#: ../../standalone/drakperm:1
#, c-format
msgid "Add a new rule at the end"
msgstr "Tambah aturan baru di akhir"

#: ../../standalone/drakboot:1
#, c-format
msgid "LiLo and Bootsplash themes installation successful"
msgstr "Instalasi tema LiLo dan Bootsplash sukses"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Anda dapat memutuskan apakah printer di mesin remote harus dibuat secara "
"otomatis agar dapat dipakai di mesin ini."

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Silakan beri parameter untuk modul %s ini.\n"
"Parameter biasanya dalam format ``nama=nilai nama2=nilai2...''.\n"
"Misalnya, ``io=0x300 irq=7''"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Keluar dari program tanpa menyimpan dalam tabel partisi?"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../standalone/drakbackup:1
#, c-format
msgid "On Hard Drive"
msgstr "di Hard Drive"

#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "Instalasi paket..."

#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "Belanda"

#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "Angola"

#: ../../standalone/drakbackup:1
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Paket berikut perlu diinstal:\n"

#: ../../standalone/logdrake:1
#, c-format
msgid "service setting"
msgstr "setting servis"

#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "Custom"

#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "Latvia"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "File sudah digunakan oleh loopback lain, pilih yang lainnya"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "Baca-saja"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"alert\" is true, also reports to syslog."
msgstr ""
"Aktifkan/Matikan proteksi pemalsuan resolusi nama.\n"
"Jika \"alert\" = true, juga lapor ke syslog."

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "Tiada driver yg diketahui"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Jika ini bukan yang ingin dikonfigurasikan, masukkan nama device/file di "
"baris masukan"

#: ../../standalone/draksound:1
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Kartu Suara tak terdeteksi. Pastikan Kartu Suara yg disupport Linux "
"terhubung dengan benar.\n"
"\n"
"\n"
"Kunjungi database piranti keras di:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Configure Local Area Network..."
msgstr "Konfigurasi Local Area Network..."

#: ../../../move/move.pm:1
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Aktifkan sistem suara"

#: ../../security/l10n.pm:1
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "Verifikasi checksum file suid/sgid"

#: ../../security/l10n.pm:1
#, c-format
msgid "Run some checks against the rpm database"
msgstr "Cek database rpm"

#: ../../standalone/drakperm:1
#, c-format
msgid "Execute"
msgstr "Eksekusi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "Persiapan database printer ..."

#: ../../standalone/harddrake2:1
#, c-format
msgid "Information"
msgstr "Info"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "Tiada kartu jaringan"

#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "3 tombol"

#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "Filesystem apa yang Anda inginkan?"

#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr "Malta"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "Info detil"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Setting standar printer\n"
"\n"
"Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi "
"perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, "
"pencetakan dg kualitas tinggi berjalan amat lambat."

#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Disket ini tak diformat dengan sistem FAT"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "Konfigureasi jaringan"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""
"Opsi ini akan menyimpan file yg telah berubah, menurut mode yg digunakan "
"(incremental atau differential)."

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "Kartu Grafik"

#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "Sedang menghitung bound sistem file Mindows"

#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "Kamerun"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "DNS Provider 1 (boleh diisi boleh tidak)"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Anda kini dapat membuat partisi %s. \n"
"Ketika selesai jangan lupa simpan dengan menekan tombol `w'"

#: ../../keyboard.pm:1
#, c-format
msgid "Saami (swedish/finnish)"
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "Close"
msgstr "Tutup"

#: ../../help.pm:1
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""
"\"%s\": cek pilihan negara saat ini. Jika tak berada di sini, klik\n"
"\"%s\" dan pilih yg lain. Jika negara Anda tak ada di daftar,\n"
"klik \"%s\" utk mendapatkan daftar lengkap."

#: ../../standalone/logdrake:1
#, c-format
msgid "Calendar"
msgstr "Kalender"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Restorasi Entri\n"
"Katalog Terpilih"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Untuk memakai printer lpd remote, berikan nama host\n"
"server printer dan nama printer di server tsb."

#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "Islandia"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "Konfigurasi Jaringan"

#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper hilang"

#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "dihentikan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Apakah FPU punya vektor irq"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "Buka Tree"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
"Driver \"%s\" lama di-blacklist.\n"
"\n"
"Ia merusak kernel saat pembongkaran (unload).\n"
"\n"
"Driver baru \"%s\" akan digunakan pada boot berikut."

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Expert Mode"
msgstr "Mode Ahli"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "Opsi printer"

#: ../../standalone/drakgw:1
#, c-format
msgid "Local Network adress"
msgstr "Alamat Jaringan Lokal"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Backup file System Anda. (direktori /etc)"

#: ../../security/help.pm:1
#, c-format
msgid "Set the user umask."
msgstr "Set umask pengguna."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Anda kini dapat men-download paket update yg mungkin dirilis setelah\n"
"distribusi ini dirilis.\n"
"\n"
"Anda perlu koneksi Internet untuk men-download.\n"
"\n"
"Ingin instal update?"

#: ../../standalone/logdrake:1
#, c-format
msgid "Samba Server"
msgstr "Server Samba"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Australian Optus cable TV"
msgstr "TV kabel Optus Australia"

#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> untuk pindah | <Spasi> untuk pilih | <F12> Layar berikut"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Subnet:"
msgstr "Subnet:"

#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr "Zimbabwe"

#: ../../standalone/drakbackup:1
#, c-format
msgid "When"
msgstr "Kapan"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Anda perlu kode mikro alcatel.\n"
"Downloadlah di\n"
"%s\n"
"dan copy mgmt.o dalam /usr/share/speedtouch"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Hour"
msgstr "Honduras"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Server DNS Sekunder (boleh tidak diisi)"

#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "Finlandia"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "Pilihan kedalaman warna: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Anda tak bisa buang paket ini. dia mesti diupgrade"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "Memuat dari floppy"

#: ../../standalone/drakclock:1
#, c-format
msgid "Timezone - DrakClock"
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "Aktifkan/Matikan pencatatan paket aneh IPv4."

#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr "Slovenia"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Mouse test"
msgstr "Tes Mouse"

#: ../../standalone/drakperm:1
#, c-format
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm digunakan utk melihat file yg digunakan utk membetulkan izin, "
"pemilik, dan grup via msec.\n"
"Anda dapat juga mengedit aturan Anda sendiri yang akan menindas aturan "
"standar."

#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Masukkan pengguna\n"
"%s"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- Alat PCI dan USB: daftar id PCI/USB vendor, device, subvendor dan subdevice"

#: ../../standalone/draksplash:1
#, c-format
msgid "ProgressBar color selection"
msgstr "Pilihan warna ProgressBar"

#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Ini adalah entri yang lain lagi.\n"
"Anda boleh tambahkan atau mengubah yang sudah ada."

#: ../../help.pm:1
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: ../../help.pm:1
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: ../../standalone/drakbug:1
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu\n"
"saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load\n"
"sedang rendah."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr "Support radio :"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing SANE packages..."
msgstr "Instalasi paket SANE..."

#: ../../any.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "SILO"

#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "Ubah tipe"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid ", USB printer #%s"
msgstr ", printer USB #%s"

#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "Instalasi SILO"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Selamat, instalasi selesai.\n"
"Cabut media boot dan tekan Return/Enter untuk reboot.\n"
"\n"
"\n"
"Untuk informasi perbaikan rilis Linux Mandrake ini,\n"
"silakan lihat Errata di:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Informasi untuk konfigurasi sistem juga tersedia di \n"
"bab Instalasi akhir di Buku Petunjuk Resmi Linux Mandrake."

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "Enable Network Time Protocol"
msgstr "Restorasi Via Protokol Jaringan: %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "penakut"

#: ../../security/l10n.pm:1
#, c-format
msgid "Do not send mails when unneeded"
msgstr "Jangan kirim mail jika tak perlu"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Kirim laporan mail setelah tiap backup ke :"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Perintah ini digunakan di kotak \"Perintah cetak\" di dialog cetak beberapa "
"aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan "
"diberikan oleh aplikasi.\n"

#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "Resolusi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin "
"berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama "
"share printer yang ingin Anda akses, juga nama pengguna, katasandi, dan info "
"workgroup."

#: ../../security/help.pm:1
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr "Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna."

#: ../../standalone/drakgw:1
#, c-format
msgid "reconfigure"
msgstr "konfigurasi ulang"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Kartu Anda dapat menggunakan akselerasi hardware 3D pada XFree %s,\n"
"NAMUN INI BARU DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG."

#: ../../security/l10n.pm:1
#, c-format
msgid "Shell timeout"
msgstr "Timeout cangkang (shell)"

#: ../../standalone/logdrake:1
#, c-format
msgid "Xinetd Service"
msgstr "Server Xinetd"

#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "akses ke peralatan jaringan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "Firmware-Upload utk HP LaserJet 1000"

#: ../advertising/03-software.pl:1
#, c-format
msgid ""
"And, of course, push multimedia to its limits with the very latest software "
"to play videos, audio files and to handle your images or photos."
msgstr ""
"Mandrake Linux 9.2 memungkinkan Anda menggunakan software mutakhir untuk "
"memainkan file audio, edit dan mengatur gambar/foto, dan melihat video"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Berikut adalah daftar printer yg terdeteksi otomatis"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Ada error saat install aboot,\n"
"paksakan instalasi walau merusak partisi awal?"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Restorasi File\n"
"Terpilih"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"Ada %s, hapus?\n"
"\n"
"Awas: Jika Anda telah melakukan proses ini Anda mungkin perlu\n"
" membersihkan entri dari authorized_keys pada server."

#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr "Silakan isi atau cek kolom berikut"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Ingin simpan modifikasi /etc/fstab"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Boot Protocol"
msgstr "Protokol Boot"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "Disk LVM %s\n"

#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "Saat boot"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Perlu paket %s. Anda ingin instal?"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bus identification"
msgstr "Identifikasi bus"

#: ../../lang.pm:1
#, c-format
msgid "Vatican"
msgstr "Vatikan"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "Lebih dulu buatlah backup data Anda"

#: ../../harddrake/data.pm:1
#, c-format
msgid "ADSL adapters"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Anda punya beberapa harddisk, yang mana yang ingin di-instal linux?"

#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "Eritrea"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot ISO"
msgstr "ISO boot"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Firmware needed"
msgstr "jika perlu"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove List"
msgstr "Hapus Daftar"

#: ../advertising/05-desktop.pl:1
#, c-format
msgid "A customizable environment"
msgstr "Lingkungan tersesuaikan"

#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr "Eskimo"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""
"Bbrp protokol, misalnya rsync, dikonfigurasikan di pihak server. Nama "
"'modul' path servis akan dipakai, bukan path direktori."

#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr "Maroko"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "Anda punya model printer mana?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr "Tambah printer baru"

#: ../../standalone/drakbackup:1
#, c-format
msgid "          All of your selected data have been          "
msgstr "          Semua data terpilih telah           "

#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Delete"
msgstr "<-- Hapus"

#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "ukuran chunk"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"Argumen: (arg)\n"
"\n"
"\\fIarg\\fP = ALL mengizinkan adanya /etc/issue dan /etc/issue.net. \\fIarg"
"\\fP = NONE tak ada issues\n"
"diizinkan selebihnya hanya /etc/issue diizinkan."

#: ../../security/help.pm:1
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr "Izinkan/Tolak sulogin(8) dalam level pengguna single."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "perintah sebelum booting, atau 'c' untuk command line."

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "Problems installing package %s"
msgstr "Problem instalasi paket %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Add a scanner manually"
msgstr "Tambah scanner secara manual"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Refresh"
msgstr "Penyegaran"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "Muat ulang tabel partisi"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Ya, saya mau autologin dg (pengguna, desktop) ini"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Selected"
msgstr "Restorasi Terpilih"

#: ../../standalone/drakfont:1
#, c-format
msgid "Search for fonts in installed list"
msgstr "Cari font di daftar instalasi"

#: ../../standalone/drakgw:1
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "Jaringan Lokal tak berakhiran `.0', keluar."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Boot"
msgstr "Boot"

#: ../../standalone/drakbackup:1
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr "Tipe tuner :"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n"
"Mandrake menyediakan dua.\n"
"\n"
" * \"pdq\" - artinya ``Print, Djangan nQantri'', adalah pilihan jika Anda\n"
"punya koneksi langsung ke printer Anda dan ingin bebas dari panik kemacetan\n"
"printer, serta tak punya printer jaringan. Ia akan meng-handle hanya kasus\n"
"jaringan yg amat mudah dan agak lambat utk kerja jaringan. Ambil \"pdq\" "
"jika\n"
"ini kali pertama Anda mengenal GNU/Linux.\n"
"\n"
" * \"%s\" - ``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer\n"
"lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk\n"
"sistem cetak kuno \"lpd\" jadi kompatibel dg sistem lama. Banyak trik dapat\n"
"dilakukan, tapi setup awalnya hampir semudah \"pdq\". Jika Anda perlu ini\n"
"utk emulasi server \"lpd\", Anda harus menyalakan daemon \"cups-lpd\".\n"
"Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.\n"
"\n"
"Jika nanti Anda tidak menyukai sistem cetak yg Anda pilih saat ini,\n"
"jalankan PrinterDrake dari Pusat Kontrol Mandrake dan klik tombol Ahli."

#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "Kunci \"Menu\""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan "
"benar. Cari model yang benar di daftar jika model yang salah atau \"Printer "
"raw\" diterangkan."

#: ../../standalone/draksec:1
#, c-format
msgid "Security Administrator:"
msgstr "Admin Keamanan:"

#: ../../security/help.pm:1
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr "Set timeout cangkang (shell). Nol = tidak ada timeout."

#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: ../../../move/tree/mdk_totem:1
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr "jika diset ya, cek izin file-file di home pengguna."

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"You don't have an Internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Tiada koneksi internet.\n"
"Buat dulu dg meng-klik 'Configure'"

#: ../../standalone/drakfont:1
#, c-format
msgid "Fonts copy"
msgstr "Copy font"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "Otomatis"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Anda ingin tes konfigurasi ini?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr "Printer \"%s\" sukses dihapus dari Star Office/OpenOffice.org/GIMP."

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "Simpan pilihan paket"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Actions"
msgstr "/_Aksi"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Remove the last item"
msgstr "Hapus item terakhir"

#: ../../standalone/drakbackup:1
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Daftar pengguna restorasi (hanya tanggal terakhir per pengguna yg penting)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No net boot images created!"
msgstr "Image boot jaringan tak dibuat!"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "gunakan pptp"

#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Pilih service mana yang hendak dijalankan saat boot scr otomatis"

#: ../../security/l10n.pm:1
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "Cek file/direktori yg dapat ditulisi oleh semua orang"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Learn how to use this printer"
msgstr "Belajar cara pakai printer ini"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "Konfigurasikan jaringan sekarang"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Pilih mirror tempat Anda ingin mengambil paket program"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Saya tidak dapat mengubah ukuran partisi FAT ini,\n"
"Ada error ini yang terjadi: %s"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Size: "
msgstr "Ukuran: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Sektor mana yang hendak dipindah"

#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "Bahama"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "Anda ingin meng-klik tombol ini? "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "Konfigurasi manual"

#: ../../standalone/logdrake:1
#, c-format
msgid "search"
msgstr "cari"

#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Paket ini akan memuat map papanketik yang dipilih di file\n"
"/etc/sysconfig/keyboard. Mapnya dapat dipilih dari utility kbdconfig.\n"
"Biarkan aktif!"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (instalasi driver display)"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Nama host Zeroconf tak boleh berisi ."

#: ../../security/help.pm:1
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr "Terima/Tolak echo icmp."

#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog adalah fasilitas yang digunakan para daemon untuk mencatat\n"
"pesan log sistem di file. Sebaiknya syslog selalu hidup."

#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Unknown/Others"
msgstr "Tak dikenal/Lain-lain"

#: ../../standalone/drakxtv:1
#, c-format
msgid "No TV Card detected!"
msgstr "Kartu TV tak terdeteksi!"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Options"
msgstr "Opsi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Printer \"%s\" kini diset sbg printer standar."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai "
"protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port "
"paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak "
"server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes "
"cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan "
"diabaikan oleh driver."

#: ../../standalone/harddrake2:1
#, c-format
msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr "generasi cpu (mis: 8 utk PentiumIII, ...)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detected"
msgstr "Otomatis terdeteksi"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Anda sedang akan melakukan instalasi server PXE sbg server DHCP dan server\n"
"TFTP utk membangun server instalasi. Dengan fitur tsb, komputer lain di\n"
"jaringan lokal akan dpt diinstal menggunakan komputer ini sbg source-nya.\n"
"Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg\n"
"drakconnect sebelum pergi lebih jauh.\n"
"\n"
"Catatan: Anda mesti punya Adaptor Jaringan untuk mensetup Jaringan Area\n"
"Lokal (LAN)."

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) adalah API suara pertama, tak tergantung OS "
"(tersedia di hampir semua sistem unix) tapi amat primitif dan terbatas.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) adalah arsitektur modular yg\n"
"men-support banyak kartu ISA, USB dan PCI.\n"
"\n"
"Ia juga menyediakan API lebih baik daripada OSS.\n"
"\n"
"Utk menggunakan alsa, pakailah:\n"
"- api OSS kompatibel lama, atau\n"
"- api ALSA baru yg menyediakan banyak fitur canggih tapi memerlukan library "
"ALSA.\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Tiada ruang 1MB utk bootstrap! Instal akan berlanjut, tetapi utk mem-boot "
"sistem, Anda perlu membuat partisi bootstrap di DiskDrake"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr "Pilih printer yg ingin diset up atau ketikkan nama device/file"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "Tolak"

#: ../../standalone/draksec:1
#, c-format
msgid "LOCAL"
msgstr "LOKAL"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS"

#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila "
"perlu."

#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "Membuat dan memformat file %s"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "Jika diset ke ya, cek penambahan/penghapusan file sgid."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
"HP LaserJet 1000 perlu firmware di-upload setelah dinyalakan. Downloadlah "
"paket driver Mindows dari situs web HP (firmware di CD printer tak bekerja) "
"dan urailah file firmware (self-extracting '.exe' file) dg utilitas 'unzip' "
"dan carilah file 'sihp1000.img'. Copy file ini ke direktori '/etc/printer'. "
"Di sana ia akan ditemukan oleh skrip uploader otomatis dan di-upload ketika "
"printer dihubungkan dan dinyalakan.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Pilih LVM yang ada untuk ditambahkan ke"

#: ../../standalone/drakfont:1
#, c-format
msgid "xfs restart"
msgstr "jalankan ulang xfs"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr "Sudah ada printer \"%s\", Anda benar ingin menindih konfigurasinya?"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Pakai scanner di host: "

#: ../../standalone/drakfont:1
#, c-format
msgid "Unselected All"
msgstr "Semua tak dipilih"

#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
#, c-format
msgid "No partition available"
msgstr "Tidak ada partisi"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Printer Management \n"
msgstr "Manajemen Pengguna \n"

#: ../../standalone/logdrake:1
#, c-format
msgid "Domain Name Resolver"
msgstr "Perumus Nama Domain"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "Kunci sandi (lagi)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr "Nama share Samba hilang!"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type install done"
msgstr "Instalasi True Type selesai"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Detection in progress"
msgstr "Pendeteksian sedang berjalan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Bangun Seluruh Kernel -->"

#: ../../network/netconnect.pm:1
#, c-format
msgid "modem"
msgstr "modem"

#: ../../lang.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "Selamat Datang di %s"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003 MandrakeSoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Masukkan disket Update Modules ke drive %s"

#: ../../standalone/drakboot:1
#, c-format
msgid "Bootsplash"
msgstr "Bootsplash"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Printer berikut\n"
"\n"
"%s%s\n"
"terhubung langsung dg sistem Anda"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Sharing printer di host/jaringan: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"Komando \"%s\" juga memungkinkan modifikasi setting job cetak tertentu. "
"Tambahkan setting yang diinginkan ke baris perintah, mis. \"%s <file>\". "

#: ../../standalone/drakclock:1
#, fuzzy, c-format
msgid "DrakClock"
msgstr "Drakbackup"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Kadangkala, driver %s butuh info tambahan agar dapat bekerja normal walau\n"
"biasanya tak perlu. Inginkah Anda memberikan parameter tambahan tadi atau\n"
"biarkan saja drivernya melakukan deteksi sendiri parameternya? Deteksi\n"
"otomatis bisa membuat komputer hang), tapi tak merusak."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "Bukan label CD yang benar. Disk berlabel %s."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Cakupan daemon (%s) :\n"

#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "Kuba"

#: ../../standalone/drakbackup:1
#, c-format
msgid "October"
msgstr "Oktober"

#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "Belize"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Searching for new printers..."
msgstr "Cari printer baru..."

#: ../../standalone/drakbackup:1
#, c-format
msgid " (multi-session)"
msgstr " (multi-session)"

#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Timeout Kernel Boot"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Kartu Anda punya akselerasi hardware 3D, tapi hanya bisa digunakan pada "
"XFree %s.\n"
"Kartu Anda ini dapat dipakai pada XFree %s yg punya dukungan baik dalam 2D."

#: ../../security/help.pm:1
#, c-format
msgid " Activate/Disable daily security check."
msgstr "Aktifkan/Matikan cek keamanan harian."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: ../../security/l10n.pm:1
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr "Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem"

#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Wizard partisi DrakX menemukan solusi berikut:"

#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "Hungaria"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Pilih provider Anda.\n"
"Bila tidak ada dalam daftar, pilih Tak Terdaftar"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "sinkronisasi waktu otomatis (dg NTP)"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "Sedang menghitung bound sistem file Mindows"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: ../../any.pm:1
#, c-format
msgid "LDAP Server"
msgstr "Server LDAP"

#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem\n"
"pada laptop. Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak\n"
"apa-apa kalau tak diinstal di mesin yang tak perlu PCMCIA."

#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "Pilih negri Anda"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- File Sistem:\n"

#: ../../standalone/drakbug:1
#, c-format
msgid "Standalone Tools"
msgstr "Alat Mandiri"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Where"
msgstr "Mana"

#: ../../standalone/logdrake:1
#, c-format
msgid "but not matching"
msgstr "tapi bukan pencocokan"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Di sini dapat dipilih driver alternatif (OSS atau ALSA) utk kartu suara Anda "
"(%s)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Konfigurasikan card PCMCIA"

#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "kdesu hilang"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: %s memerlukan nama pengguna...\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "Kunci sandi"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "Pulau Christmas"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Automatic"
msgstr "IP otomatis"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Instalasi bootloader gagal. Ada kesalahan berikut:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "EIDE/SCSI channel"
msgstr "Kanal EIDE/SCSI"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr "Set printer ini sebagai standar"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "Sudah benar?"

#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "Partisi %s"

#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "Penakut"

#: ../../any.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "<-- Del User"
msgstr "<-- Hapus Pengguna"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Location on the bus"
msgstr "Lokasi di bus"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No printer found!"
msgstr "Printer tak ditemukan!"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the vendor name of the device"
msgstr "nama pembuat device"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "Hapus seluruh disk"

#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (Default)"

#: ../../standalone/drakgw:1
#, c-format
msgid "Automatic reconfiguration"
msgstr "Konfigurasi ulang otomatis"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Receiving Speed:"
msgstr "Laju Penerimaan:"

#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Kepulauan Turks dan Caicos"

#: ../../standalone/drakconnect:1
#, c-format
msgid "No Ip"
msgstr ""

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "<- Previous"
msgstr "<- Kembali"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
"  Transfer  \n"
"Sekarang"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password and network authentication methods"
msgstr "Set katasandi root dan metode otentikasi jaringan."

#: ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Togel tampilan rata dan terurut grupnya"

#: ../../standalone/drakboot:1
#, c-format
msgid "Themes"
msgstr "Tema"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "Pilihan: %s"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr "Manajer Boot: %s. Klik Configure untuk memanggil ahli setup."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "Konfigurasi winprinter OKI"

#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr "Santa Helena"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr " di port paralel #%s"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Security Level"
msgstr "Tingkat Keamanan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Ada tahapan yang tidak diselesaikan.\n"
"\n"
"Anda ingin keluar sekarang?"

#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr "Sudan"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Polandia (layout qwertz)"

#: ../../lang.pm:1
#, c-format
msgid "Syria"
msgstr "Syria"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"Printer Anda alat multifungsi dari HP atau Sony (OfficeJet, PSC, LaserJet "
"1100/1200/1220/3200/3300 dg scanner, DeskJet 450, Sony IJP-V100), HP "
"PhotoSmart atau HP LaserJet 2200?"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Selamat datang di pemilih sistem operasi %s!\n"
"\n"
"Pilih sistem operasi pada daftar di atas atau tunggu %d detik untuk boot "
"default.\n"
"\n"

#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "Portugis"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "Nama file loopback: "

#: ../../network/network.pm:1
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Alamat server DNS harus dalam format 1.2.3.4"

#: ../../keyboard.pm:1
#, c-format
msgid "Left Control key"
msgstr "Kunci Control kiri"

#: ../../lang.pm:1
#, c-format
msgid "Serbia"
msgstr "Serbia"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Newzealand"
msgstr "Selandia Baru"

#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Direktori ini harus ada di filesystem root"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Across Network"
msgstr "lewat Network"

#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "CapsLock"

#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "Instal bootloader"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Pilih memori kartu grafis Anda"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Argumen: (arg)\n"
"\n"
"Aktifkan/Matikan crontab dan at utk pengguna. Taruh pengguna berizin di\n"
"/etc/cron.allow dan /etc/at.allow\n"
"(lihat man at(1) dan crontab(1))."

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[OPSI]\n"
"Koneksi jaringan & Internet dan aplikasi monitoring\n"
"\n"
"--defaultintf antarmuka : tampilkan antarmuka ini\n"
"--connect : sambung ke internet jika belum\n"
"--disconnect : putus sambungan internet jika telah tersambung\n"
"--force : digunakan dg (dis)connect : (putus)sambung paksa.\n"
"--status : kembalikan 1 jika tersambung 0 jika tidak, lalu keluar.\n"
"--quiet : jangan interaktif. Digunakan dg (dis)connect."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr "Pool Alamat IP Dinamik"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "nama LVM?"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Beberapa alat di kelas perangkat keras \"%s\" dihapus:\n"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "Ditemukan interface %s %s"

#: ../../standalone/drakfont:1
#, c-format
msgid "Post Install"
msgstr "Instalasi Akhir"

#: ../../standalone/drakgw:1
#, c-format
msgid "The internal domain name"
msgstr "Nama domain internal"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "IRQ kartu"

#: ../../standalone/logdrake:1
#, c-format
msgid "logdrake"
msgstr "logdrake"

#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"Impor Font dan aplikasi pemantauan\n"
"--windows_import : impor dari seluruh partisi mindows yg ada.\n"
"--xls_fonts      : tampilkan semua font yg telah ada dari xls\n"
"--strong         : font akan dicek secara ketat.\n"
"--install        : terima file dan direktori font.\n"
"--uninstall      : hapus font atau direktori font.\n"
"--replace        : tindih semua font jika telah ada\n"
"--application    : 0 tanpa aplikasi.\n"
"                 : 1 semua aplikasi yg ada di-support.\n"
"                 : name_of_application semisal so utk staroffice \n"
"                 : dan gs utk ghostscript."

#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Pilih drive floppy untuk membuat bootdisk"

#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "LILO dengan menu teks"

#: ../../standalone/net_monitor:1
#, c-format
msgid "instantaneous"
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr "Semua (tanpa firewall)"

#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "Anda harus tentukan image kernel"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on USB"
msgstr ", alat multifungsi di USB"

#: ../../interactive/newt.pm:1
#, c-format
msgid "Do"
msgstr "Laksanakan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Saya sedang mencek mirror untuk mengambil daftar paket yang tersedia"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Lithuania AZERTY (lama)"

#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brazil (ABNT-2)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr "Alamat IP host/jaringan:"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"koordinat y sudut kiri\n"
"atas papan perkembangan"

#: ../../install_gtk.pm:1
#, c-format
msgid "System installation"
msgstr "Instalasi sistem"

#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Santa Vincent dan Grenadin"

#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr "Izinkan/Larang reboot oleh pengguna konsol."

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Open"
msgstr "/File/_Buka"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Location of auto_install.cfg file"
msgstr "Lokasi file auto_install.cfg"

#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "Delay Open Firmware"

#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "Hungaria"

#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr "New Zealand"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Color configuration"
msgstr "Konfigurasi warna"

#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap "
"malam."

#: ../../standalone/drakbackup:1
#, c-format
msgid "please choose the date to restore"
msgstr "pilih tanggal restorasi"

#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr "Belanda Antilles"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Pindah dari ext2 ke ext3"

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Browse to new restore repository."
msgstr "Jelajahi repositori restorasi baru."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Selamat Datang di Dukun Setup Printer\n"
"\n"
"Dukun ini dapat menginstal printer lokal atau remote utk digunakan dari "
"mesin ini dan juga dari mesin lain di network.\n"
"\n"
"Dia akan menanyai semua info yg dibutuhkan utk menset up printer dan memberi "
"Anda akses ke semua driver printer tersedia, opsi driver, dan tipe koneksi "
"printer."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "and %d unknown printers"
msgstr "dan %d printer tak dikenal"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Chip Pentium Intel awal punya kutu di prosesor titik ambangnya shg saat "
"melakukan pembagian titik ambang (FDIV) ia takkan mencapai presisi yg "
"dibutuhkan"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Tiada kartu PCI ISDN ditemukan. Pilihlah satu pd layar berikut."

#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "GB"

#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "Silakan tulis nama pengguna"

#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "Aktifkan boot dari CD?"

#: ../../../move/move.pm:1
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr "ketikkan `void' untuk entri kosong"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "January"
msgstr "Januari"

#: ../../security/l10n.pm:1
#, c-format
msgid "Password history length"
msgstr "Panjang sejarah katasandi"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Winmodem connection"
msgstr "Koneksi winmodem"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""
"\n"
"Selamat, printer Anda kini terinstal dan terkonfigurasi!\n"
"\n"
"Anda dapat mencetak dg perintah \"Cetak\" di aplikasi Anda (biasanya di menu "
"\"File\").\n"
"\n"
"Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika "
"ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), "
"pilih \"Printer\" di bagian \"Perangkat Keras\" Pusat Kontrol Mandrake."

#: ../../standalone/drakxtv:1
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Kini Anda dapat menjalankan xawtv di Window X\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Instalasi tak dapat diteruskan karena swap kurang, tambahkan"

#. -PO: example: lilo-graphic on /dev/hda1
#: ../../install_steps_interactive.pm:1
#, c-format
msgid "%s on %s"
msgstr "%s di %s"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr ""
"Argumen: (arg)\n"
"\n"
"Izinkan/Larang login root remote."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same timezone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can used by\n"
"other machines on your local network as well."
msgstr ""
"GNU/Linux mengatur waktu dlm GMT (Greenwich Mean Time) dan menerjemahkannya\n"
"ke waktu lokal sesuai zona waktu yang Anda pilih. Dapat di-nonaktifkan\n"
"dengan melepas tanda \"Jam hardware diset ke GMT\" sehingga jam hardware\n"
"sama dengan jam sistem. Berguna bila mesin didiami OS lain seperti Mindows.\n"
"\n"
"Opsi \"Sinkronisasi waktu otomatis\" akan otomatis mengatur jam dengan\n"
"menghubungi server waktu remote di internet. Pilihlah server terdekat saat\n"
"daftar muncul. Tentu saja Anda harus punya koneksi internet agar fitur ini\n"
"berfungsi. Server waktu akan diinstalkan di mesin Anda dan dapat dipakai\n"
"oleh mesin lain di jaringan lokal Anda."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create log file!"
msgstr "File log tak dapat dibuat!"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1
#, c-format
msgid "Which is your timezone?"
msgstr "Pilih zonawaktu Anda"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use .backupignore files"
msgstr "Pakai file .backupignore"

#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "Guinea"

#: ../../network/tools.pm:1
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Sistem ini kini terhubung ke Internet."

#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Georgia Selatan dan Pulau Sandwich Selatan"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Japan (broadcast)"
msgstr "Jepang (siaran)"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""
"Monitor\n"
"\n"
"   Instalator dapat mendeteksi dan mengkonfigurasikan monitor yg terhubung\n"
"dengan mesin Anda. Jika tak demikian halnya, pilihlah monitor yg Anda punya\n"
"di daftar ini."

#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr "Mozambique"

#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "Ikon"

#: ../../../move/tree/mdk_totem:1
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "akses ke program X"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please choose what you want to backup"
msgstr "Pilih apa yang akan di-backup"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 warna (8 bit)"

#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "Read-write"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "Ukuran: %s\n"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Hostname: "
msgstr "Nama Host: "

#: ../../standalone/drakperm:1
#, c-format
msgid "Add a rule"
msgstr "Tambah aturan"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "Ukuran chunk %s\n"

#: ../advertising/02-community.pl:1
#, c-format
msgid "Build the future of Linux!"
msgstr "Bangun masa depan Linux!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "Printer Lokal"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Mount device %s akan dimount ke mana?"

#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "Koneksi ADSL"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Tiada konfigurasi, mohon klik Dukun atau Lanjutan.\n"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Error!"
msgstr "Ada Kesalahan"

#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "Koneksi kabel terdeteksi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Tak ada izin pemindahan %s ke %s"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_Report Bug"
msgstr "/_Laporan Bug"

#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "Dominika"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "Ubah ukuran"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "Resolusi: %s\n"

#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Akses modul kernel gagal (file %s hilang), ini umumnya dikarenakan disket "
"boot Anda tak sinkron dengan media instalasi (buatlah disket boot baru)"

#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Pilih port yang benar. Misalnya \"COM1\" di Mindows bernama \"ttyS0\" di \n"
"GNU/Linux."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "Paket berikut akan dihapus"

#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "Hubungan ke Internet"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "Pakai partisi yang sudah ada"

#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "Kanada (Quebec)"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "Device Mouse: %s\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Reselect correct fonts"
msgstr "Pilih ulang font yg benar"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""
"Akhirnya, Anda akan ditanya apakah Anda ingin punya antarmuka grafis saat\n"
"boot. Pertanyaan ini diajukan meski Anda memilih tidak mentes konfigurasi.\n"
"Jelas, Anda ingin menjawab \"Tidak\" jika mesin Anda dijadikan server, atau\n"
"jika Anda gagal mengkonfigurasi display."

#: ../advertising/13-mdkexpert_corporate.pl:1
#, c-format
msgid "MandrakeExpert Corporate"
msgstr "AhliMandrake Perusahaan"

#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Write protection"
msgstr "Proteksi penulisan"

#: ../../standalone/drakfont:1
#, c-format
msgid "You've not selected any font"
msgstr "Anda belum memilih font"

#: ../../steps.pm:1
#, c-format
msgid "Language"
msgstr "Pilih bahasa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "Seleksi model printer"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Kartu ISDN"

#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr "%d detik"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Masukkan disket kosong di drive %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr "Harus diisi URI valid!"

#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "Ditemukan antarmuka \"%s\" Anda ingin menggunakannya?"

#: ../../standalone/drakgw:1
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "Konfigurasi ulang antarmuka dan server DHCP"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "Konfigurasi suara"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "Halaman tes foto"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "Lakukan partisi disk secara custom"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Masukkan Nama Printer dan Komentar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Printer berikut\n"
"\n"
"%s%s\n"
"terhubung langsung dg sistem Anda"

#: ../../network/modem.pm:1
#, c-format
msgid "You don't have any winmodem"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "type: %s"
msgstr "tipe: %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slovakia (QWERTY)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid ""
"This should be a comma-separated list of local users or email addresses that "
"you want the backup results sent to. You will need a functioning mail "
"transfer agent setup on your system."
msgstr ""
"Daftar (dipisahkan oleh koma) pengguna lokal atau alamat email ke mana hasil "
"backup akan dikirim. Anda memerlukan agen transfer mail yg berfungsi dg "
"benar."

#: ../../standalone/draksound:1
#, c-format
msgid "No Sound Card detected!"
msgstr "Kartu Suara tak terdeteksi!"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "Port Mouse"

#: ../../security/l10n.pm:1
#, c-format
msgid "Check for unsecured accounts"
msgstr "Cek account tak terjaga"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Manajer Display harus dijalankan ulang agar perubahan berlaku.\n"
"(di konsol lakukan: service dm restart)"

#: ../../standalone/logdrake:1
#, c-format
msgid "Ftp Server"
msgstr "Server FTP"

#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: ../../standalone/drakfont:1
#, c-format
msgid "%s fonts conversion"
msgstr "konversi font %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "tipe bus tempat mouse dicolokkan"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change that if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you want to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"DrakX menyajikan aneka informasi mesin Anda. Jika ingin mengubah entri,\n"
"klik \"Konfigurasikan\":\n"
"\n"
" * \"Papanketik\": cek konfigurasi map papanketik, ubah bila perlu.\n"
"\n"
" * \"Negara\": negara saat ini. Jika tak berada di negara ini, pilih yg "
"lain.\n"
"\n"
" * \"Zona waktu\": DrakX menerka zona waktu Anda dari bahasa yg Anda pilih.\n"
"Jika tak benar, klik \"Konfigurasikan\".\n"
"\n"
" * \"Mouse\": cek konfigurasi mouse, klik tombol utk mengubahnya bila perlu\n"
"\n"
" * \"Printer\": klik \"Konfigurasikan\" utk membuka konfigurator printer.\n"
"\n"
" * \"Kartu suara\": kartu suara terdeteksi di sistem Anda akan ditampilkan\n"
"di sini. Jika tak cocok, klik tombol dan pilih driver lain.\n"
"\n"
" * \"Antarmuka Grafis\": Awalnya DrakX mengkonfigurasikan antarmuka grafis "
"pada\n"
"resolusi \"800x600\". Jika tak cocok, klik tombol utk mengonfigurasikannya "
"lagi.\n"
"\n"
" * \"Kartu TV\": kartu TV yg terdeteksi di sistem Anda akan ditampilkan di\n"
"sini. Jika Anda punya kartu TV dan tak terdeteksi, klik tombol utk\n"
"mengkonfigurasikannya.\n"
"\n"
" * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan ditampilkan\n"
"di sini. Anda dapat meng-klik tombol utk mengubah parameternya.\n"
"\n"
" * \"Jaringan\": Jika Anda ingin mengkonfigurasikan akses Internet atau "
"jaringan\n"
"lokal sekarang, klik tombol ini.\n"
"\n"
" * \"Tingkat Keamanan\": Tingkat keamanan dapat didefinisikan ulang di "
"sini.\n"
"\n"
" * \"Firewall\": Jika ingin berhubungan dg Internet, sebaiknya Anda berjaga\n"
"diri dari penyusupan dg memasang firewall (tembok api).\n"
"\n"
" * \"Bootloader\": Jika Anda ingin mengganti konfigurasi bootloader, klik "
"tombol\n"
"tersebut. Ini diperuntukkan pengguna ahli.\n"
"\n"
" * \"Servis\": Anda dpt mengatur servis mana yg akan dijalankan. Jika ingin\n"
"menjalankan mesin sbg server periksalah setup-nya sekali lagi."

#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "Comoros"

#: ../../standalone/drakbackup:1
#, c-format
msgid "May"
msgstr "Mei"

#: ../../standalone/drakboot:1
#, c-format
msgid "Yaboot mode"
msgstr "mode Yaboot"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Mouse Generik 3 Tombol"

#: ../../standalone/drakxtv:1
#, c-format
msgid "USA (cable)"
msgstr "AS (kabel)"

#: ../../standalone/drakboot:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"Gagal meluncurkan LiLo!\n"
"Luncurkan \"lilo\" sbg root di baris perintah utk menyelesaikan instalasi "
"tema LiLo."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select another media to restore from"
msgstr "Pilih media lain utk direstorasi"

#: ../../standalone/drakbug:1
#, c-format
msgid "Software Manager"
msgstr "Manajer Software"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "Kirim ulang"

#: ../../standalone/drakbackup:1
#, c-format
msgid "CD in place - continue."
msgstr "CD di tempat - lanjutkan."

#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "KB"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Network & Internet"
msgstr "Jaringan & Internet"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Lithuania \"fonetik\" QWERTY"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Net Boot Images"
msgstr "Image Boot Net"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Sharing of local scanners"
msgstr "Sharing scanner local"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Probe Plug'n Play gagal. Pilihlah monitor yang benar"

#: ../../../move/move.pm:1
#, c-format
msgid "Detect again USB key"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "Services dan daemon"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "Nama host remote hilang!"

#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "dengan /usr"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "Jaringan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr "Deteksi printer yg terhubung dg mesin Microsoft Windows"

#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "Katasandi ini terlalu sederhana"

#: ../../security/l10n.pm:1
#, c-format
msgid "Chkconfig obey msec rules"
msgstr "Chkconfig mematuhi aturan msec"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slovakia (QWERTZ)"

#: ../advertising/06-development.pl:1
#, c-format
msgid ""
"To modify and to create in different languages such as Perl, Python, C and C+"
"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
"development environments."
msgstr ""
"Pemrograman dg aneka bahasa spt Perl, Python, C and C++ tak pernah semudah "
"saat ini berkat GNU gcc 3 dan lingkungan pengembangan Open Source terbaik."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "No devices found"
msgstr "Image tak ditemukan"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Benar-benar instalasi minim (khususnya tanpa urpmi)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use daemon"
msgstr "Pakai daemon"

#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1
#: ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "Otentikasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "Tambah printer ini ke Star Office/OpenOffice.org/GIMP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Additional CUPS servers: "
msgstr "Server CUPS tambahan: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Pilih satu printer dari daftar atau isilah namahost atau IP dan nomor port "
"opsional (default 9100)."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "%s akan dimount ke mana?"

#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "Aljazair"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Via Network"
msgstr "Restorasi Via Jaringan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use tar and bzip2 (rather than tar and gzip)"
msgstr ""

#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then asked to choose the server that best\n"
"suits your needs."
msgstr ""
"Jika ada bbrp server tersedia utk kartu Anda, dg atau tanpa akselerasi 3D,\n"
"pilihlah server yg paling sesuai."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tBackup dengan tar dan gzip\n"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Set as default"
msgstr "standar"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: ../../printer/main.pm:1 ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "(di mesin ini)"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Kedua kunci Control bersamaan"

#: ../../standalone/drakhelp:1
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[OPSI]...\n"
"  --no-confirmation      tiada konfirmasi awal pada modus MandrakeUpdate\n"
"  --no-verify-rpm        tidak ada verifikasi tandatangan paket\n"
"  --changelog-first      tampilkan changelog sebelum filelist di window "
"penjelasan\n"
"  --merge-all-rpmnew     merger semua file .rpmnew/.rpmsave yg ditemukan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Setting Default Printer..."
msgstr "Setting printer standar..."

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Interface %s (pakai module %s)"

#: ../../standalone/draksplash:1
#, c-format
msgid "Generating preview ..."
msgstr "Prapandang sedang dibuat ..."

#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Freq harus berakhiran k, M atau G (mis. \"2.46G\" utk frekuensi 2.46 GHz), "
"atau tambahkan '0' (nol) secukupnya."

#: ../../standalone/draksec:1
#, c-format
msgid "ignore"
msgstr "abaikan"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Argumen: (arg, listen_tcp=None)\n"
"\n"
"Izinkan/Larang koneksi X. Arg pertama menunjukkan apa yg dilakukan\n"
"di sisi klien: ALL (semua koneksi diizinkan), LOCAL (hanya\n"
"koneksi lokal) and NONE (tanpa koneksi)."

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", alat multifungsi di port paralel #%s"

#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "serial"

#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgia (layout \"Latin\")"

#: ../advertising/09-mdksecure.pl:1
#, c-format
msgid "Get the best items with Mandrake Linux Strategic partners"
msgstr "Dapatkan item terbaik dg partner strategis Linux Mandrake"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Anda dapat memberikan opsi terhadap modul %s.\n"
"Ingat, semua alamat harus diisikan dengan awalan 0x misalnya '0x123'"

#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "Kenya"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Gunakan ``unmount'' terlebih dahulu"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing mtools packages..."
msgstr "Instalasi paket mtools..."

#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "Anda harus tentukan partisi swap"

#: ../../standalone/draksplash:1
#, c-format
msgid "first step creation"
msgstr "pembuatan step pertama"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Kedua Shift bersamaan"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Select a scanner model"
msgstr "Pilih model scanner"

#: ../../security/help.pm:1
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr "Terima/Tolak pesan error IPv4 yg tak benar."

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Drakbackup Configuration"
msgstr "Konfigurasi Drakbackup"

#: ../../standalone/logdrake:1
#, c-format
msgid "Save as.."
msgstr "Simpan sbg.."

#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr "Korea (Utara)"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""
"Antarmuka ini belum dikonfigurasikan.\n"
"Luncurkan dukun konfigurasi di window utama"

#: ../../install_gtk.pm:1
#, c-format
msgid "System configuration"
msgstr "Konfigurasi sistem"

#: ../../any.pm:1 ../../security/l10n.pm:1
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: ../../any.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "Katasandi Admin Domain"

#: ../advertising/05-desktop.pl:1
#, c-format
msgid ""
"Perfectly adapt your computer to your needs thanks to the 11 available "
"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
"2.2, Window Maker, ..."
msgstr ""
"Tersedia 11 antarmuka yg dapat dimodifikasi: KDE 3.1, Gnome 2.2, "
"WindowMaker, ..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer ..."
msgstr "Konfigurasi printer..."

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Utk memastikan integritas data setelah ukuran partisi berubah,\n"
"cek sistem file akan dilakukan pada boot berikut dalam Mindows(TM)"

#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "MB"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "jika diset ya, cek database rpm"

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr "Kepulauan Virgin (Inggris)"

#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "Bermuda"

#: ../../standalone/drakfont:1
#, c-format
msgid "click here if you are sure."
msgstr "klik di sini jika Anda yakin."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"File konfigurasi tak ditemukan\n"
"silakan klik Dukun atau Lanjutan"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Yang terdaftar di sini adalah partisi Linux terdeteksi pd hard drive Anda.\n"
"Anda dapat memakai pilihan yg dibuatkan, karena itu baik utk instalasi\n"
"umum. Bila Anda mengubah pilihan, setidaknya Anda perlu mendefinisikan\n"
"partisi root (\"/\"). Jangan pilih partisi yg terlalu kecil agar dapat\n"
"menginstal software dg leluasa. Bila Anda ingin menyimpan data pada partisi\n"
"lain, Anda perlu membuat partisi \"/home\" (hanya mungkin jika punya lebih\n"
"dari satu partisi Linux.)\n"
"\n"
"Tiap partisi terdaftar sbb: \"Nama\", \"Kapasitas\".\n"
"\n"
"\"Nama\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n"
"\"nomor partisi\" (misalnya \"hda1\").\n"
"\n"
"\"Tipe hard drive\" adalah \"hd\" utk drive IDE dan \"sd\" utk drive SCSI.\n"
"\n"
"\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila "
"berupa IDE, maka:\n"
"\n"
"   *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n"
"\n"
"   *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n"
"\n"
"   *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n"
"\n"
"   *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n"
"\n"
"Pada drive SCSI, \"a\"=\"ID SCSI terkecil\", \"b\"=\"ID SCSI terkecil kedua"
"\", dsb."

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Remove"
msgstr "Hapus"

#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "Lesotho"

#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr "utopia 25"

#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "Pipe job ke perintah"

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Hapus file loopback?"

#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "Pantai Gading"

#: ../../standalone/harddrake2:1
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "nama device dinamik baru yg dihasilkan oleh devfs kernel core"

#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/drakclock:1 ../../standalone/drakgw:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Yes"
msgstr "Ya"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Protokol apa yang ingin Anda gunakan?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore Progress"
msgstr "Perkembangan Restorasi"

#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "Estonia"

#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Anda punya tabel partisi tapi tidak bisa saya gunakan.\n"
"Satu-satunya cara adalah memindahkan partisi primary Anda ke partisi\n"
"extended selanjutnya"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "Pilihlah host yg scanner lokalnya akan dibuat agar dapat dipakai:"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Channel"
msgstr "Kanal"

#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "Tambah"

#: ../../standalone/drakbackup:1
#, c-format
msgid " Error while sending mail. \n"
msgstr " Kesalahan saat pengiriman surat. \n"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "Papanketik"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Masukkan CD dengan label %s\n"
" ke drive CD di titik mount /mnt/cdrom"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Rata2 harus berakhiran k, M atau G (mis. \"11M\" utk 11M), atau tambahkan "
"'0' (nol) secukupnya."

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Pilih koneksi yg hendak dikonfigurasi"

#: ../../standalone/draksec:1
#, c-format
msgid "Please wait, setting security level..."
msgstr "Tunggu, tingkat keamanan sedang diset..."

#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigurasi perangkat jaringan %s"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "activated"
msgstr "telah diaktifkan"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "Pilihlah antarmuka jaringan yang akan digunakan sbg server dhcp."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Sedang mencari paket untuk diupgrade"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "Posisi mount: "

#: ../../standalone/drakfont:1
#, c-format
msgid "parse all fonts"
msgstr "baca semua font"

#: ../../security/help.pm:1
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "Izinkan/Larang login root langsung."

#: ../../security/help.pm:1
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr "Terima/Tolak echo icmp tersiar."

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "Dengan X"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "Konfigurasi head majemuk"

#: ../../standalone/drakbug:1
#, c-format
msgid "No browser available! Please install one"
msgstr "Browser tak tersedia! Installah satu"

#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Lakukan perubahan?\n"
"Konfigurasi sekarang adalah:\n"
"\n"
"%s"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "ReiserFS tak dapat dipakai utk partisi berukuran di bawah 32MB"

#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"Protokol rwho digunakan untuk melihat daftar pengguna yang sedang login\n"
"di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger)."

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "Nama domain"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Sharing of local printers"
msgstr "Berbagi printer lokal"

#: ../../security/help.pm:1
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr "Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Available printers"
msgstr "Printer yg tersedia"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "NO"
msgstr "INFO"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "Kosong"

#: ../../standalone/draksplash:1
#, c-format
msgid "text width"
msgstr "lebar teks"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Mount device %s akan dimount ke mana?"

#: ../../standalone/drakgw:1
#, c-format
msgid "The default lease (in seconds)"
msgstr "Lama peminjaman standar (dalam detik)"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"\n"
"\n"
"Konfigurasi koneksi %s.\n"
"\n"
"\n"
"Tekan OK utk mulai."

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Interface \"%s\""
msgstr "Antarmuka \"%s\""

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Dengan dokumentasi dasar (disarankan!)"

#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "1 tombol"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"%d printer tak dikenal terhubung langsung dengan sistem Anda"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "Tes"

#: ../../lang.pm:1
#, c-format
msgid "Korea"
msgstr "Korea"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Pilihan Anda? (default `%s'%s) "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "Printer raw"

#: ../../standalone/harddrake2:1
#, c-format
msgid "official vendor name of the cpu"
msgstr "nama vendor resmi cpu"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Useless without Terminal Server"
msgstr "Tak berguna tanpa Server Terminal"

#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "Pembuat"

#: ../../standalone/drakgw:1
#, c-format
msgid "Interface %s"
msgstr "Antarmuka %s"

#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "Konfigurasi mouse"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "Pilih lokasi mount"

#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1
#, c-format
msgid "OK"
msgstr "OK"

#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Yugoslavia (latin)"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "Instalasi"

#: ../../mouse.pm:1
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan"

#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "Luncurkan userdrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Ini instalasi atau update?"

#: ../../help.pm:1
#, c-format
msgid "ISDN card"
msgstr "Kartu ISDN"

#: ../advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux software, join our "
"discussion forums on our \"Community\" webpages."
msgstr ""
"Untuk berbagi pengetahuan dan membantu membangun peralatan Linux, mari "
"bergabung dalam forum diskusi yg tertera di halaman web \"Komunitas\" kami"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Hard drive.\n"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
"Tahap ini hanya aktif jika partisi GNU/Linux lama ditemukan.\n"
"\n"
"DrakX perlu tahu Anda ingin instalasi baru ataukah upgrade Linux Mandrake\n"
"yg telah ada:\n"
"\n"
"* \"Instal\": Hapus (hampir) semua sistem lama. Jika ingin mengubah "
"partisi \n"
"harddisk atau sistem file, gunakan opsi ini. Penindihan data dapat dicegah\n"
"tergantung skema partisi saat ini.\n"
"\n"
"* \"Upgrade\": Perbarui paket. Skema partisi dan data pengguna tak diubah.\n"
"Sebagian besar tahapan konfigurasi tetap ada seperti instalasi standar.\n"
"\n"
"Opsi ``upgrade'' harus berjalan normal pada sistem Linux Mandrake versi\n"
"\"8.1\" atau lebih. Upgrade dari versi sebelum \"8.1\" tak dianjurkan."

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"     DUPONT Sebastien (original version)\n"
"     CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""
"\n"
" Hakcipta (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien (versi asli)\n"
"        CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
" Program ini gratis; Anda dapat menyebar ulang dan/atau mengubah\n"
" menurut Lisensi Publik Umum GNU dari the Free Software Foundation; baik\n"
" versi 2, atau yang lebih baru.\n"
"\n"
" Program ini disebar agar dapat berguna, tapi TANPA GARANSI APAPUN; bahkan\n"
" tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n"
" TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n"
"\n"
" Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n"
" ini; jika tidak, tulis ke the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
" Terimakasih:\n"
"    -  pfm2afm:   \n"
"\t oleh Ken Borgendale:\n"
"\t    Konversi file .pfm Mindows ke .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t oleh James Macnicol: \n"
"\t    type1inst membuat file fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t oleh Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Konversi file font ttf ke font afm dan pfb\n"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Printer di server CUPS remote"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr "Gagal menghapus printer \"%s\" dari Star Office/OpenOffice.org/GIMP."

#: ../../standalone/drakfont:1
#, c-format
msgid "here if no."
msgstr "di sini jika tidak."

#: ../../network/network.pm:1
#, c-format
msgid "DHCP host name"
msgstr "Nama Host DHCP"

#: ../../standalone/drakgw:1
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Lama peminjaman maksimum (dalam detik)"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Di serial port mana mouse Anda dicolokkan ?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr "Bekerja dg baik?"

#: ../../fs.pm:1
#, c-format
msgid "Mount the file system read-only."
msgstr "Mount sistem file read-only."

#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "Lemah"

#: ../../security/l10n.pm:1
#, c-format
msgid "Report check result by mail"
msgstr "Laporkan hasil cek via mail"

#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP start range"
msgstr "Kisar awal DHCP"

#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "Tak aman"

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "SSH server"
msgstr "Server SSH"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s sektor"

#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#: ../../standalone/drakclock:1 ../../standalone/harddrake2:1
#, c-format
msgid "No"
msgstr "Tidak"

#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "Guadeloupe"

#: ../../keyboard.pm:1
#, c-format
msgid "Kannada"
msgstr "Kannada (India)"

#: ../../standalone/drakfont:1
#, c-format
msgid "could not find any font.\n"
msgstr "gagal temukan font.\n"

#: ../../standalone/keyboarddrake:1
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Ingin membuat tombol BackSpace menjadi Delete dalam konsol?"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "Laju refresh vertikal"

#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "Memulai langkah `%s'\n"

#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr "Niger"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing %s ..."
msgstr "Hapus %s ..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "Tiada printer"

#: ../../standalone/logdrake:1
#, c-format
msgid "alert configuration"
msgstr "konfigurasi peringatan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr "Pilihan printer NetWare"

#: ../../standalone/draksplash:1
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "Prapandang Bootsplash %s (%s)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "February"
msgstr "Pebruari"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "General"
msgstr "Umum"

#: ../../security/l10n.pm:1
#, c-format
msgid "/etc/issue* exist"
msgstr "ada /etc/issue*"

#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "Tambahkan pengguna"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Konfigurasi Jaringan (adapter %d)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "April"
msgstr "April"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "non-aktifkan sekarang"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Paket wajib %s hilang"

#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr "Filipina"

#: ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1
#: ../../standalone/draksec:1 ../../standalone/mousedrake:1
#: ../../standalone/net_monitor:1
#, c-format
msgid "Ok"
msgstr "Ok"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "drakTermServ Overview"
msgstr "Overview drakTermServ"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "Nama antrian printer"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "Ingin pakai aboot?"

#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "Belarusia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr "PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "Pindah file ke partisi baru"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Tambahkan di sini server CUPS yg printernya ingin Anda pakai. Anda hanya "
"perlu melakukan ini jika server tak menyiarkan info printernya ke jaringan "
"lokal."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Selamat Datang di Penolong Setup Printer\n"
"\n"
"Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini.\n"
"\n"
"Jika Anda punya printer terhubung dg mesin ini, hubungkan dan nyalakan "
"sehingga dapat dideteksi.\n"
"\n"
" Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup "
"printer sekarang."

#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore From Catalog"
msgstr "Restorasi Dari Katalog"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"

#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "penyambungan partisi %s ke direktori %s gagal"

#: ../../standalone/drakboot:1
#, c-format
msgid "Lilo screen"
msgstr "Layar lilo"

#: ../../bootloader.pm:1 ../../help.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO dengan menu grafis"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "Perkiraan"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Anda tak bisa buang paket ini, sebab dia sudah diinstal"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", printer \"%s\" di server SMB/Windows \"%s\""

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "Jalan terus?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Sedang mencari paket yg tersedia dan membangun ulang database rpm..."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      Laporan DrakBackup \n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Tampaknya bukan media yang dapat merekam!"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "Tentukan opsi"

#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: ../../standalone/drakbackup:1
#, c-format
msgid "New user list:\n"
msgstr "Daftar pengguna baru:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Harus ada nama/IP server!"

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Bootdisk baru membantu Anda untuk melakukan boot sistem Linux tanpa\n"
"tergantung pada bootloader. Ini berguna bila Anda tidak mau menginstal\n"
"SILO di sistem Anda, atau saat sistem operasi lain menghapus SILO, atau\n"
"SILO tak bisa digunakan pada konfigurasi hardware Anda. Bootdisk ini juga\n"
"bisa digunakan dengan image rescue Mandrake, yang memudahkan kita untuk\n"
"merecover sistem dari kegagalan. Jika Anda mau bikin bootdisk, masukkan\n"
"disket ke drive pertama dan tekan \"Ok\"."

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Anda tak dapat menggunakan sistem file bersandi utk mount point %s"

#: ../../security/help.pm:1
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr "Set panjang riwayat katasandi utk mencegah penggunaan ulang katasandi."

#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr "Kepulauan Norfolk"

#: ../../standalone/drakboot:1
#, c-format
msgid "Theme installation failed!"
msgstr "Instalasi tema gagal!"

#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "Tiada yang dikerjakan"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "digunakan untuk loopback"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Bug Report Tool"
msgstr "Pelapor Kutu Mandrake"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Apply filter"
msgstr "Terapkan filter"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr "gunakan pppoe"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "Pindah file ke partisi baru"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s dengan akselerasi hardware 3D PERCOBAAN"

#: ../../help.pm:1 ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "Opsi Lengkap"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr "Transfer"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Swedia)"

#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "Afghanistan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "More Options"
msgstr "Opsi Tambahan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "Hapus file tar Harddisk setelah backup ke media lain."

#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"Cron adalah program UNIX standar yang menjalankan program pengguna\n"
"pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap\n"
"dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan\n"
"lebih mantapnya option pada konfigurasinya."

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add Client -->"
msgstr "Tambah Klien -->"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "Baca dengan seksama!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "RW"
msgstr "RW"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Tolong,\n"
"tuliskan standar dan daerah tv Anda"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "Port"

#: ../../standalone/drakgw:1
#, c-format
msgid "No (experts only)"
msgstr "Tidak (hanya ahli)"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No kernel selected!"
msgstr "Tiada kernel terpilih!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Tekan enter untuk memboot OS yang terpilih, atau tekan 'e' untuk edit"

#: ../../standalone/drakperm:1
#, c-format
msgid "Set-GID"
msgstr "Set-GID (ID Grup)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "Kunci sandi tak cocok"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""
"Pada CD multisesi, hanya sesi pertama yg akan menghapus cdrw. Lainnya, cdrw "
"dihapus sebelum tiap backup."

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "USB printer"
msgstr ", printer USB"

#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "Kunci \"Mindows\" kanan"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "jika diset ya, cek katasandi kosong di /etc/shadow."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, simply turn off your computer."
msgstr ""
"Bacalah lisensi sebelum melanjutkan. Itu mencakup seluruh distribusi\n"
"Mandrake Linux. Jika Anda setuju dengan semua pasal di dalamnya, klik\n"
"\"Terima\". Jika tidak, matikan komputer Anda."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Daftar opsi cetak tersedia untuk printer ini:\n"
"\n"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "Resolusi"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"konfigurator drakfirewall\n"
"\n"
"Program ini mengkonfigurasi firewall pribadi sistem Linux Mandrake.\n"
"Untuk membuat solusi firewall yang lebih baik, cobalah\n"
"distribusi khusus MandrakeSecurity Firewall"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Masukkan nama pengguna, katasandi dan nama domain utk mengakses host ini."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Remove selected host"
msgstr "Hapus host terpilih"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "Konfigurasi jaringan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Deteksi otomatis drive _jaz"

#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "Tanpa sharing"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule down one level"
msgstr "Turunkan aturan terpilih satu level"

#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "TB"

#: ../../standalone/drakbackup:1
#, c-format
msgid "FATAL"
msgstr "FATAL"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Refresh the list"
msgstr "Segarkan daftar"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""
"        - %s masing-masing klien:\n"
"        \t\tVia clusternfs, tiap klien diskless dapat memiliki file "
"konfigurasi sendiri\n"
"        \t\tdi sistemfile root server. drakTermServ nantinya akan membantu\n"
"        \t\tmembuat file-file ini."

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""
"Server DHCP memungkinkan boot komputer lain dg PXE dalam kisar alamat yg "
"diberikan.\n"
"\n"
"Alamat jaringan adalah %s dg netmask %s.\n"
"\n"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Delete"
msgstr "Hapus"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Komputer Anda bisa diset agar menjalankan X saat booting.\n"
"Anda mau fasilitas ini?"

#: ../../standalone/drakfloppy:1
#, c-format
msgid "Build the disk"
msgstr "Buat disk"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Disconnect %s"
msgstr "Putus %s"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Status:"
msgstr "Status:"

#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "Proxy HTTP"

#: ../../standalone/logdrake:1
#, c-format
msgid "SSH Server"
msgstr "Server SSH"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Network dg rsync.\n"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol"
msgstr "Protokol Eropa"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", printer \"%s\" di server \"%s\""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""
"Pastikan daemon cron masuk dalam daftar servis.\n"
"\n"
"Ingat bahwa kini semua media 'net' juga menggunakan harddisk."

#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/drakauth:1 ../../standalone/drakboot:1
#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/draksplash:1 ../../../move/move.pm:1
#, c-format
msgid "Error"
msgstr "Ada Kesalahan"

#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "izinkan \"su\""

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "Australia"

#: ../../standalone/drakfont:1
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "tunggu saat ttmkfdir..."

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Konfigurasikan hanya kartu \"%s\"%s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Level"
msgstr "Level"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr "Ubah sistem cetak"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Sistem Anda men-support konfigurasi head majemuk.\n"
"Apa yg ingin Anda lakukan?"

#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "gagal melakukan mount: "

#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "Konfigurasi service"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Broadcast Address:"
msgstr "Alamat Siaran(Broadcast):"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"Kernel GNU/Linux melakukan loop kalkulasi saat boot utk memulai penghitung "
"timer. Hasilnya disimpan dlm bogomips sbg salah satu \"benchmark\" cpu."

#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "Image"

#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "Administrasi remote"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "Gagal menambahkan printer \"%s\" ke Star Office/OpenOffice.org/GIMP."

#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr "Support PCMCIA tak ada lagi utk kernel 2.2, pakailah kernel 2.4."

#: ../../standalone/drakfont:1
#, c-format
msgid "Selected All"
msgstr "Semua Dipilih"

#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../standalone/logdrake:1
#, c-format
msgid "Webmin Service"
msgstr "Servis Webmin"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "device"
msgstr "device"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Enter the directory to save to:"
msgstr "Masukkan direktori utk penyimpanan:"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "Yunani"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "Semua"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Sistem (spooler) printer mana yang ingin digunakan?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "July"
msgstr "Juli"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Prints into %s"
msgstr ", cetak ke %s"

#: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1
#, c-format
msgid "An error occurred"
msgstr "Ada error"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Paket ini mesti diupgrade\n"
"Benar tak mau dipilih?"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamil (layout mesintik)"

#: ../../security/help.pm:1
#, c-format
msgid "Use password to authenticate users."
msgstr "Pakai katasandi utk membuktikan keaslian pengguna."

#: ../../security/help.pm:1
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Izinkan/Larang daftar pengguna sistem di manajer display (kdm dan gdm)."

#: ../../standalone/drakautoinst:1
#, c-format
msgid "manual"
msgstr "manual"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Filename text to search for:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Pembuat, model, driver printer"

#: ../../standalone/drakfloppy:1
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Media di device %s tidak ada atau write-protected.\n"
"Masukkan satu."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktori %s telah berisi data\n"
"(%s)"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "Printer di server NetWare"

#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "Berikan jumlah RAM dalam satuan MB"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Friday"
msgstr "Jumat"

#: ../../standalone/net_monitor:1
#, fuzzy, c-format
msgid "Disconnection from Internet complete."
msgstr "Pemutusan hubungan dari Internet selesai."

#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "Nama Lengkap"

#: ../../standalone/drakfont:1
#, c-format
msgid "done"
msgstr "selesai"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Mohon uncheck atau hapus nanti."

#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "Lebih Kuat"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Pilih partisi yang akan diformat"

#: ../../standalone/drakxtv:1
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"Kartu TV tak terdeteksi. Pastikan Kartu Video/TV yg disupport Linux "
"terhubung dengan benar.\n"
"\n"
"\n"
"Kunjungi database piranti keras di:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't find %s on %s"
msgstr "%s di %s tak tercari"

#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "Jepang 106 tombol"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "This will take a few minutes."
msgstr "Butuh beberapa menit."

#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: ../../standalone/drakbackup:1
#, c-format
msgid "June"
msgstr "Juni"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Use scanners on remote computers"
msgstr "Pakai scanner di komputer remote"

#: ../../standalone/drakperm:1
#, c-format
msgid "Delete selected rule"
msgstr "Hapus aturan terpilih"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Sedang mengakses printer di server CUPS remote"

#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr "Masukkan disket ke %s"

#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr "Maladewa"

#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "kompak"

#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 menit"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "type: fat"
msgstr "tipe: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "pada kanal %d id %d\n"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", alat multifungsi"

#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr "Laos"

#: ../advertising/04-configuration.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful "
"tool to fully adapt your computer to the use you make of it. Configure and "
"customize elements such as the security level, the peripherals (screen, "
"mouse, keyboard...), the Internet connection and much more!"
msgstr ""
"Mandrake Linux 9.2 menyajikan Pusat Kontrol Mandrake, konfigurator ampuh "
"komputer Anda. Anda dapat mengatur tingkat keamanan, perangkat (layar, "
"mouse, papanketik...), koneksi Internet dll!"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""
"Argumen: (arg)\n"
"\n"
"Aktifkan/Matikan pengecekan kekacauan kartu ethernet."

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "Tiada partisi FAT untuk diubah ukurannya (atau tak ada cukup ruangan)"

#: ../../standalone/drakperm:1
#, c-format
msgid "Up"
msgstr "Naik"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Firewall"
msgstr "Firewall"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Area:"
msgstr "Area:"

#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Pengontrol (E)IDE/ATA"

#: ../../fs.pm:1
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "Semua I/O ke sistem file harus sinkron."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "Server Printer"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Custom configuration"
msgstr "Konfigurasi pribadi"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""
"Tunjukkan tempat image instalasi akan ditaruh.\n"
"\n"
"Jika Anda tak punya direktori, copy-lah isi CD/DVD\n"
"\n"

#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Santa Pierre dan Miquelon"

#: ../../standalone/drakbackup:1
#, c-format
msgid "September"
msgstr "September"

#: ../../standalone/draksplash:1
#, c-format
msgid "saving Bootsplash theme..."
msgstr "simpan tema Bootsplash..."

#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr "Portugis"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "Anda punya lagi?"

#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr ", cetak ke %s"

#: ../../network/network.pm:1
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Tentukan nama host dari alamat DHCP"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "Ubah ke modus normal"

#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "Generik"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Silinder %d sampai %d\n"

#: ../../standalone/drakbug:1
#, c-format
msgid "YOUR TEXT HERE"
msgstr ""

#: ../../standalone/drakconnect:1
#, c-format
msgid "New profile..."
msgstr "Buat profil baru..."

#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "NONE"
msgstr "TIADA"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Disk mana yang hendak dipindah?"

#: ../../standalone/draksplash:1
#, c-format
msgid "Display logo on Console"
msgstr "Display logo di Konsol"

#: ../../any.pm:1
#, c-format
msgid "Windows Domain"
msgstr "Domain Mindows"

#: ../../keyboard.pm:1
#, c-format
msgid "Saami (norwegian)"
msgstr "Saami (norwegia)"

#: ../../standalone/drakpxe:1
#, c-format
msgid "Interface %s (on network %s)"
msgstr "Antarmuka %s (di jaringan %s)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "INFO"
msgstr "INFO"

#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis dan Futuna"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Perlu bikin dulu /etc/dhcpd.conf first!"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Is FPU present"
msgstr "apakah ada FPU"

#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Mohon maaf, informasi lengkap\n"
"tentang layanan ini tidak tersedia."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Tidak ada scanner yg dapat dipakai sistem Anda.\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build Single NIC -->"
msgstr "Bangun NIC Single -->"

#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr "Kepulauan Marshall"

#: ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "Sudah sesuai?"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Windows (FAT32)"
msgstr "Mindows (FAT32)"

#: ../../steps.pm:1
#, c-format
msgid "Root password"
msgstr "Katasandi root"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Build All Kernels -->"
msgstr "Bangun Semua Kernel -->"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "device"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr "jika diset ya, laporkan file tak bertuan."

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Anda belum punya partisi swap\n"
"\n"
"Jalan terus?"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "Version: "
msgstr "Versi: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Server IP missing!"
msgstr "Server IP hilang!"

#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr "Suriname"

#: ../../network/adsl.pm:1
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "Simpan di floppy"

#: ../../any.pm:1
#, c-format
msgid "Enable ACPI"
msgstr "Aktifkan ACPI"

#: ../../fs.pm:1
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: ../../help.pm:1
#, c-format
msgid "Graphical Environment"
msgstr "Mode Grafis"

#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "Jibraltar"

#: ../../network/modem.pm:1
#, c-format
msgid "Do nothing"
msgstr "Tak lakukan apa-apa"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Delete Client"
msgstr "Hapus Klien"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "Tipe filesystem: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "Pemulaian network..."

#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr "Vietnam"

#: ../../standalone/harddrake2:1
#, c-format
msgid "/_Fields description"
msgstr "/Penjelasan _Field"

#: ../advertising/10-security.pl:1
#, c-format
msgid "Optimize your security by using Mandrake Linux"
msgstr "Optimasi keamanan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown@fensystems.co.uk>\n"
"\n"
msgstr ""
"\n"
"\n"
" Terimakasih:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown@fensystems.co.uk>\n"
"\n"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
#: ../../standalone/drakperm:1 ../../standalone/draksec:1
#: ../../standalone/harddrake2:1
#, c-format
msgid "Help"
msgstr "Pertolongan"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr "jika ya, cek apakah piranti jaringan berada dalam modus promiscuous."

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "Nomor telepon Anda"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Tentukan ukuran untuk menyimpan Mindows"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Halaman test telah dikirim ke printer.\n"
"Akan butuh waktu sebentar untuk mulai mencetak.\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Username required"
msgstr "Nama pengguna dibutuhkan"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Device"
msgstr "Device: "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you may not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may have a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation where your native language and keyboard do\n"
"not match. In either case, this installation step will allow you to select\n"
"an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Normalnya, DrakX memilih papanketik utk Anda (sesuai bahasa yg Anda pilih).\n"
"Tapi Anda mungkin tak punya papanketik yg persis cocok dg bhs Anda:\n"
"misalnya, jika Anda orang Swis berbahasa Inggris, Anda mungkin masih ingin\n"
"papanketik Swis. Atau jika Anda berbahasa Inggris tapi tinggal di Quebec,\n"
"Anda mungkin menghadapi masalah sama. Dalam kedua kasus, Anda akan harus\n"
"kembali ke tahap instalasi ini dan memilih papanketik yg sesuai dari\n"
"daftar.\n"
"\n"
"Klik \"Lainnya\" utk menampilkan daftar lengkap papanketik ter-support.\n"
"\n"
"Jika Anda memilih papanketik berbasis alphabet non-Latin, dialog berikut\n"
"memungkinkan Anda men-switch antara layout Latin dan non-Latin."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Pilihan printer SMB (windows 95/NT)"

#: ../../printer/main.pm:1
#, c-format
msgid "URI: %s"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr "Daftar pengguna berubah, file konfigurasi ditulis ulang."

#: ../../standalone/drakfloppy:1
#, c-format
msgid "mkinitrd optional arguments"
msgstr "opsi argumen mkinitrd"

#: ../advertising/03-software.pl:1
#, c-format
msgid ""
"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
"Kmail, create your documents with OpenOffice.org."
msgstr ""
"Jelajah Web dg Mozilla atau Konqueror, baca mail dg Evolution atau Kmail, "
"buat dokumen dg OpenOffice.org."

#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protokol lain"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "Cetak halaman tes"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "Activate now"
msgstr "aktifkan sekarang"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB atau lebih"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Pilihlah halaman tes yang ingin Anda cetak.\n"
"Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser "
"bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Pilihlah device tempat %s terhubung"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "Belum diformat\n"

#: ../../standalone/draksec:1
#, c-format
msgid "Periodic Checks"
msgstr "Cek Periodik"

#: ../../standalone/drakpxe:1
#, c-format
msgid "PXE Server Configuration"
msgstr "Konfigurasi Server PXE"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup the system files before:"
msgstr "Backup file sistem sebelum:"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan\n"
"terkoneksi ke Internet sebagai klien."

#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "Drive disket Pertama"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/File/_Keluar"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "Pilih ukuran baru"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Media class"
msgstr "Kelas media"

#: ../../standalone/XFdrake:1
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not known by this version of Scannerdrake."
msgstr "%s tak dikenal oleh Scannerdrake versi ini."

#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "Kepulauan Faroe"

#: ../../standalone/drakfont:1
#, c-format
msgid "Restart XFS"
msgstr "Jalankan ulang XFS"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr "Tambahkan host/jaringan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scannerdrake will not be started now."
msgstr ""

#: ../../standalone/harddrake2:1
#, c-format
msgid "Model name"
msgstr "Nama model"

#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "Albania"

#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Inggris, Teritori Samudera Indonesia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Normal Mode"
msgstr "Modus Normal"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "Tiada CDR/DVDR di drive!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "Tipe koneksi printer"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid "No network adapter on your system!"
msgstr "Tidak ada adaptor jaringan di sistem ini!"

#: ../../printer/main.pm:1
#, c-format
msgid "Network %s"
msgstr "Jaringan %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr "Malayalam"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr "Opsi %s keluar batas!"

#: ../../standalone/net_monitor:1
#, c-format
msgid "Connect %s"
msgstr "Sambung %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting CUPS..."
msgstr "Jalankan ulang CUPS..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Cetak/Scan/Kartu Foto di \"%s\""

#: ../../../move/move.pm:1
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "Lokasi mount %s ada dua"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "Jika diset ya, jalankan cek chkrootkit."

#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "Konfigurasi Koneksi"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "Takdikenal|Generik"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one nearer to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"Saat Mandrake Linux diinstal, mungkin beberapa paket telah diupdate sejak\n"
"rilis awal. Beberapa kesalahan mungkin telah diperbaiki / masalah keamanan\n"
"dipecahkan. Untuk memanfaatkan update ini Anda dapat men-download-nya dari\n"
"Internet. Pilih \"Ya\" jika ada koneksi Internet aktif, atau \"Tidak\" jika\n"
"ingin mengupdate paket lain waktu.\n"
"\n"
"Jika \"Ya\", daftar sumber download update akan ditampilkan. Pilih yang\n"
"terdekat. Lalu muncul daftar paket: lihat lagi pilihan Anda, tekan\n"
"\"Instal\" untuk mengambil/nstal paket atau \"Batal\" jika tak jadi."

#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "Keluar"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "Alokasi otomatis"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "Periksa bad blok?"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Other MultiMedia devices"
msgstr "Piranti MultiMedia Lain"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "burner"
msgstr "Printer"

#: ../../standalone/drakbug:1
#, c-format
msgid "Bug Description/System Information"
msgstr ""

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "Pengguna standar"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, c-format
msgid "No remote machines"
msgstr "Tiada mesin remote"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Selamat Datang di Penolong Setup Printer\n"
"\n"
"Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini.\n"
"\n"
"Jika Anda punya printer terhubung dg mesin ini, hubungkan dan nyalakan "
"sehingga dapat dideteksi.\n"
"\n"
" Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup "
"printer sekarang."

#: ../../any.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "Otentikasi NIS"

#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi"

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Pemakaian Bersama Koneksi Internet telah aktif"

#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr "Uni Emirat Arab"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr "IO_0 kartu"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Disable Local Config"
msgstr "Non-aktifkan Konfigurasi Lokal"

#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr "Muangthai"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "IO_1 kartu"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Search:"
msgstr "Cari:"

#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "Kazakhstan"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Routers:"
msgstr "Router:"

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Write"
msgstr "Tulis %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "Tampilkan semua printer CUPS remote"

#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Instalasi Linux Mandrake %s"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unknown driver"
msgstr "Driver tak dikenal"

#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr "Papanketik Muangthai"

#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "Pulau Bouvet"

#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "Parameter Dialup"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "Jika port tak diberikan, sbg standar akan dipakai 631."

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""
"        - File konfigurasi sistem per klien:\n"
"        \t\tVia clusternfs, tiap klien diskless dapat memiliki file "
"konfiguras sendiri\n"
"        \t\tdi sistemfile root server. drakTermServ nantinya akan membantu\n"
"        \t\tmembuat file /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
"sysconfig/keyboard\n"
"        \t\ttiap klien.\n"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Ganti Cd-Rom!\n"
"\n"
"Masukkan Cd-Rom berlabel \"%s\" ke drive dan tekan Ok. Jika Anda tak punya,\n"
"tekan Batal untuk menghindari instalasi dari Cd-Rom ini."

#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "Polandia"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Online"
msgstr "Mandrake Online"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-Network dg webdav.\n"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr ", alat multifungsi di port paralel #%s"

#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware."

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr "Netmask"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "Harddisk tak ditemukan"

#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "2 tombol"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "Tipe koneksi ISDN apa yang Anda miliki?"

#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "Label"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "Simpan di floppy"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check open ports"
msgstr "dideteksi pada port %s"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Edit selected printer"
msgstr "Edit server yg dipilih"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection"
msgstr "Deteksi otomatis printer"

#: ../../network/isdn.pm:1
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Yang mana kartu ISDN Anda?"

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS adalah protokol populer untuk file sharing lewat network TCP/IP.\n"
"Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan "
"menggunakan\n"
"konfigurasi pada file /etc/exports."

#: ../../standalone/drakbug:1
#, c-format
msgid "Msec"
msgstr "Msec"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Catatan, label berubah:\n"
"%s"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr "Jumlah buffer penangkap :"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Pilihan Anda? (0/1, default %s) "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Tiap-tiap partisi yang telah dibuat harus diformat agar dapat digunakan\n"
"(format berarti membuat filesystem).\n"
"\n"
"Sekarang Anda dapat mem-format ulang partisi yg ada utk dihapus datanya.\n"
"BIla ini hendak Anda lakukan, pilihlah partisi yang hendak diformat.\n"
"\n"
"Ingat, Anda tak perlu melakukan format ulang pada semua partisi yg ada.\n"
"Anda perlu mem-format ulang partisi yg akan diisi sistem operasi (misalnya\n"
"pada partisi \"/\", \"./usr\", atau \"/var\"), tapi tak perlu melakukannya\n"
"pada partisi berisi data yang masih akan digunakan (misalnya \"/home\").\n"
"\n"
"Hati-hati dalam memilih partisi. Setelah diformat semua data akan hilang\n"
"dan tak dapat dikembalikan ke kondisi semula.\n"
"\n"
"Klik \"Lanjut ->\" bila Anda siap mem-format partisi.\n"
"\n"
"Klik \"<- Kembali\" jika Anda ingin memilih partisi lain utk instalasi "
"sistem\n"
"operasi Mandrake Linux baru Anda.\n"
"\n"
"Klik \"Tambahan\" jika ingin memilih partisi yg akan dicek blok rusaknya\n"
"di disk."

#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "Perancis"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "Ceko (QWERTY)"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "Koneksi winmodem"

#: ../../standalone/service_harddrake:1
#, c-format
msgid "Hardware probing in progress"
msgstr "Penyalaan perangkat keras sedang berjalan"

#: ../../network/shorewall.pm:1 ../../standalone/drakgw:1
#, c-format
msgid "Net Device"
msgstr "Device Net"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "Ringkasan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., "
"printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...)."

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Next"
msgstr "Lanjut"

#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Anda tak dapat menginstal bootloader pada partisi %s\n"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr "Puerto Rico"

#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr "(bootp/dhcp/zeroconf)"

#: ../../standalone/drakautoinst:1
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Selamat Datang.\n"
"\n"
"Parameter instalasi otomatis tersedia di bagian sebelah kiri"

#: ../../standalone/draksplash:1
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"paket 'ImageMagick' diperlukan agar kerja bisa dilakukan dg benar.\n"
"Klik \"Ok\" utk menginstal 'ImageMagick' atau \"Batal\" utk keluar"

#: ../../network/drakfirewall.pm:1
#, fuzzy, c-format
msgid "Telnet server"
msgstr "Server X"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Lithuania \"number row\" QWERTY"

#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Paket berikut akan dihapus agar sistem Anda dapat di-upgrade: %s\n"
"\n"
"\n"
"Benarkah Anda ingin menghapus paket tersebut?\n"

#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: ../../any.pm:1
#, c-format
msgid "NIS Domain"
msgstr "Domain NIS"

#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "Antartika"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- File Pengguna:\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "Opsi mount"

#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "Jamaika"

#: ../../services.pm:1
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Tunjuk raw device ke block devices (misalnya partisi hard drive),\n"
"utk digunakan oleh aplikasi semacam Oracle atau player DVD"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Tunggu, instalasi sedang disiapkan..."

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Ceko (QWERTZ)"

#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Lacak ID kartu network (berguna di laptop)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr "Nomor port harus berupa bilangan bulat"

#: ../../standalone/draksplash:1
#, c-format
msgid "You must choose an image file first!"
msgstr "Pilihlah file image!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore from Hard Disk."
msgstr "Restorasi dari Hard Disk."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "Tambahkan ke LVM"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "Server DNS"

#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trinidad dan Tobago"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD and LPRng tak men-support printer IPP.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "Nama Host"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Edit"
msgstr "/_Edit"

#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "mudah"

#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "Hapus semua"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "Tiada halaman tes"

#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Kepulauan Malvinas"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Boot disk creation"
msgstr "pembuatan bootdisk"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Monday"
msgstr "Senin"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "Model tak dikenal"

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr "jika ya, cek file/direktori agar dapat ditulisi oleh semua orang."

#: ../../help.pm:1
#, c-format
msgid "authentication"
msgstr "otentikasi"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Now"
msgstr "Backup Sekarang"

#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_File"
msgstr "/_File"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "Hapus printer dari Star Office/OpenOffice.org/GIMP"

#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Luncurkan filter paket Linux kernel seri 2.2, untuk set-up\n"
"firewall yang melindungi mesin Anda dari serangan network."

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Editable"
msgstr "matikan"

#: ../../network/ethernet.pm:1
#, c-format
msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
msgstr "Klien dhcp mana yang ingin Anda pakai? (standarnya dhcp-client)"

#: ../../keyboard.pm:1
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamil (layout ISCII)"

#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: ../../security/help.pm:1
#, fuzzy, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Argumen: (ukuran)\n"
"\n"
"Set ukuran riwayat perintah cangkang. -1 berarti tak terbatas."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "Lagi buat disket auto install"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for scanners ..."
msgstr "Cari scanner..."

#: ../../lang.pm:1
#, c-format
msgid "Russia"
msgstr "Rusia"

#: ../../steps.pm:1
#, c-format
msgid "Partitioning"
msgstr "Pembuatan partisi"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "ada kartu ethernet terdeteksi"

#: ../../standalone/logdrake:1
#, c-format
msgid "Syslog"
msgstr "Syslog"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Can't create catalog!"
msgstr "Katalog tak dapat dibuat!"

#: ../advertising/11-mnf.pl:1
#, c-format
msgid ""
"Complete your security setup with this very easy-to-use software which "
"combines high performance components such as a firewall, a virtual private "
"network (VPN) server and client, an intrusion detection system and a traffic "
"manager."
msgstr ""
"Software ini mengkombinasikan komponen firewall, server dan klien virtual "
"private network (VPN), deteksi penyusupan dan manajer lalulintas."

#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Tak cukup ruangan untuk alokasi otomatis"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Set root password"
msgstr "Set katasandi root"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Enable IP spoofing protection"
msgstr ""
"Argumen: (arg, alert=1)\n"
"\n"
"Aktifkan/Matikan proteksi pemalsuan IP."

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Tak ada driver gratis utk kartu suara Anda (%s), tapi ada driver yg cocok di "
"\"%s\""

#: ../../standalone/drakperm:1
#, fuzzy, c-format
msgid "Group :"
msgstr "grup :"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Sehabis meresize partisi %s, semua data pada partisi ini akan hilang"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet connection configuration"
msgstr "konfigurasi koneksi Internet"

#: ../../security/help.pm:1
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr "Tambahkan nama sbg eksepsi penanganan umur katasandi dg msec."

#: ../../network/isdn.pm:1
#, fuzzy, c-format
msgid "USB"
msgstr "LSB"

#: ../../standalone/drakxtv:1
#, c-format
msgid "Scanning for TV channels"
msgstr "Men-scan kanal TV"

#: ../../standalone/drakbug:1
#, c-format
msgid "Kernel:"
msgstr "Kernel:"

#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
#, c-format
msgid "/_About..."
msgstr "/_About..."

#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
msgstr "Bengal"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "Kesukaan: "

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Servis: %d diaktifkan utk %d tercatat"

#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "Membuat bootdisk"

#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr "Pulau Sulaiman"

#: ../../standalone/mousedrake:1
#, c-format
msgid "Please test your mouse:"
msgstr "Silakan tes mouse Anda:"

#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "Grupkerja"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP"
msgstr "Nama host atau IP printer"

#: ../../standalone/drakconnect:1
#, fuzzy, c-format
msgid "down"
msgstr "selesai"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Host Path or Module"
msgstr "Path atau Modul Host"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah"

#: ../../standalone/drakgw:1
#, c-format
msgid "Show current interface configuration"
msgstr "Tampilkan konfigurasi antarmuka"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Add Printer"
msgstr "Printer"

#: ../../security/help.pm:1
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"Argumen menentukan apakah klien diizinkan berhubungan dg\n"
"server X di port tcp 6000 atau tidak."

#: ../../help.pm:1
#, c-format
msgid "Development"
msgstr "Pengembangan"

#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "Selesai"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "Server Web"

#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "Chile"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tJangan masukkan File Sistem\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, "
"bukan printer di mesin remote atau kotak server cetak. Hubungkan printer "
"Anda ke port lokal atau konfigurasikan di mesin yang terhubung dengannya."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""
"Alat multifungsi Anda terkonfigurasi otomatis agar dapat men-scan. Kini Anda "
"dapat men-scan dg \"scanimage\" (\"scanimage -d hp:%s\" utk menentukan "
"scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka "
"grafis \"xscanimage\" atau \"xsane\". Jika Anda memakai GIMP, Anda dapat "
"juga men-scan dg memilih poin yg sesuai di menu \"File\"/\"Acquire\". "
"Panggil \"man scanimage\" di baris perintah untuk informasi lanjut.\n"
"\n"
"Jangan pakai \"scannerdrake\" utk alat ini!"

#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(sudah ditambahkan %s)"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "Instalasi Bootloader"

#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", menggunakan perintah %s"

#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt dan Shift bersamaan"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Flags"
msgstr "Flag"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add/Del Users"
msgstr "Tambah/Hapus Pengguna"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host/network IP address missing."
msgstr "Alamat IP host/jaringan hilang."

#: ../../standalone/drakbackup:1
#, c-format
msgid "weekly"
msgstr "mingguan"

#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Settings"
msgstr "Setting"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "IP host/jaringan tak benar.\n"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""
"Buat/Transfer\n"
"kunci cadangan SSH"

#: ../../any.pm:1
#, c-format
msgid "Here is the full list of available countries"
msgstr "Ini adalah daftar negara yang tersedia"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "Halaman tes alternatif (A4)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Kalau Anda punya semua CD pada daftar di bawah, tekan OK.\n"
"Kalau tak punya sama sekali, click Cancel.\n"
"Kalau cuma punya beberapa aja, pilih aja, trus klik Ok."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Wait please"
msgstr "Tunggu"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup user files"
msgstr "Backup file pengguna"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "Baru"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the internet or that you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Ini adalah poin terpenting penentuan sekuriti sistem GNU/Linux Anda: Anda\n"
"harus mengisi katasandi \"root\". \"Root\" adalah administrator sistem dan\n"
"hanya dia yg berhak melakukan update, menambah pengguna, mengubah "
"konfigurasi\n"
"sistem, dll. Singkatnya, \"root\" dapat melakukan apapun! Karena itu Anda\n"
"harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika\n"
"terlalu mudah. Seperti Anda lihat, Anda dapat memilih utk tak memasukkan\n"
"katasandi, tapi amat kami anjurkan tidak melakukannya jika alasannya hanya:\n"
"tidak mengira bhw jika GNU/Linux di-boot, sistem operasi lain aman dari\n"
"kesalahan. Karena \"root\" dapat melampaui semua batasan dan secara tidak\n"
"sengaja menghapus semua data di partisi, menjadi \"root\" harus dipersulit.\n"
"\n"
"Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. Jangan\n"
"pernah mencatat katasandi \"root\" - itu membuat sistem mudah dibajak.\n"
"\n"
"Tapi katasandi juga jangan terlalu panjang/rumit karena Anda harus ingat\n"
"tanpa banyak usaha.\n"
"\n"
"Katasandi takkan muncul di layar seperti yg diketikkan. Anda harus dua kali\n"
"mengisi katasandi utk mengurangi kemungkinan salah ketik. Jika Anda 2 kali\n"
"melakukan kesalahan yg sama, katasandi \"salah\" ini akan dipakai pertama\n"
"kali anda login.\n"
"\n"
"Jika ingin komputer ini dikontrol oleh server otentikasi, klik \"Tambahan"
"\".\n"
"\n"
"Jika jaringan Anda memakai protokol otentikasi LDAP/NIS/PDC Windows Domain,\n"
"pilih yg cocok utk \"otentikasi\". Tanyalah admin jaringan Anda jika tak "
"tahu.\n"
"\n"
"Jika ada masalah dlm mengingat katasandi, Anda dapat memilih \"Tanpa\n"
"katasandi\", jika komputer Anda tak berhubungan dg Internet dan Anda\n"
"mempercayai semua orang utk mengaksesnya."

#: ../../security/l10n.pm:1
#, c-format
msgid "Name resolution spoofing protection"
msgstr "Proteksi penipuan nama"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option."
msgstr ""
"Kini waktunya memilih tingkat keamanan mesin. Makin terbuka suatu mesin,\n"
"dan makin penting data di dalamnya, tingkat keamanannya harus makin tinggi.\n"
"Tapi, level keamanan yang tinggi umumnya mengorbankan kemudahan pemakaian.\n"
"\n"
"Jika Anda tak tahu apa yg dipilih, biarkan aslinya."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "Muat dari floppy"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Printer berikut terdeteksi otomatis. "

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Uses command %s"
msgstr ", menggunakan perintah %s"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Boot Floppy"
msgstr "Disket boot"

#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "Norwegia"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Searching for new scanners ..."
msgstr "Cari scanner baru ..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Server WWW Apache"

#: ../../standalone/harddrake2:1
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "stepping cpu (nomor submodel (generasi))"

#: ../../standalone/drakbackup:1
#, c-format
msgid "select path to restore (instead of /)"
msgstr "pilih path utk restorasi (selain /)"

#: ../../standalone/draksplash:1
#, c-format
msgid "Configure bootsplash picture"
msgstr "Konfigurasi gambar bootsplash"

#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "Grujia"

#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "Cina"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Pastikan semua printer Anda terhubung dan hidup).\n"

#: ../../standalone/printerdrake:1
#, c-format
msgid "Reading data of installed printers..."
msgstr "Baca data dari printer terinstal..."

#: ../../standalone/drakbackup:1
#, c-format
msgid " Erase Now "
msgstr " Hapus Sekarang "

#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "server"

#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Masukkan disket yang sudah diformat dengan tipe FAT di drive %s"

#: ../../standalone/harddrake2:1
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "ya artinya prosesor punya koprosesor aritmetik"

#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Tunggu, konfigurasi sedang diterapkan..."

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Selamat datang di sang pemilih sistem operasi, GRUB"

#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "Grub"

#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr "Pengontrol SCSI"

#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " di server LPD \"%s\", printer \"%s\""

#: ../../standalone/drakedm:1
#, c-format
msgid "Choosing a display manager"
msgstr "Pilih manajer display"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf Host name"
msgstr "Nama Host Zeroconf"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "Alamat IP harus dalam format 1.2.3.4"

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Configure CUPS printing system"
msgstr "Ubah sistem cetak"

#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "Ekuador"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Add an item"
msgstr "Tambah item"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Printer di mesin ini dapat dipakai oleh komputer lain"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "China (Hong Kong)"
msgstr "Hong Kong"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "File image `%s' tak ditemukan."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "Kartu suara tak terdeteksi. Coba \"harddrake\" setelah instalasi"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""
"Port tak berlaku: %s.\n"
"Format yg benar adalah \"port/tcp\" atau \"port/udp\", \n"
"sedangkan port berkisar dari 1 sampai 65535."

#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "Cangkang"

#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome dan Principe"

#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Gagal login dg nama pengguna %s (katasandi salah?)"

#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Azerbaijan (latin)"

#: ../../standalone/drakbug:1
#, c-format
msgid "Package not installed"
msgstr "Paket tak terinstal"

#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "Samoa Amerika"

#: ../advertising/12-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr "Jadi AhliMandrake"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Protocol"
msgstr "Protokol"

#: ../../standalone/drakfont:1
#, c-format
msgid "Copy fonts on your system"
msgstr "Salin font di sistem Anda"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Harddrake help"
msgstr "Pertolongan Harddrake"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Mandrake Terminal Server Configuration"
msgstr "Konfigurasi Server Terminal Mandrake"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    Detil Laporan DrakBackup\n"
"\n"
"\n"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Restore all backups"
msgstr "Restorasi semua backup"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " on parallel port #%s"
msgstr " di port paralel #%s"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr "Set panjang minimum, jumlah minimum digit dan huruf besar katasandi."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr "Jika diset ke ya, cek port yg terbuka."

#: ../../standalone/drakbackup:1
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Perlu waktu untuk menghapus media."

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "Anda tak bisa pilih/buang paket ini"

#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1
#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakfloppy:1
#, c-format
msgid "Warning"
msgstr "Awas"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- File Lain:\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "Nama host remote"

#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "akses ke program X"

#: ../../install_interactive.pm:1
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Hitung ukuran partisi Mindows"

#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Refresh"
msgstr "/Penyega_ran"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "Itali"

#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "Pulau Cayman"

#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "error melepas mount %s: %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr "Nama Printer"

#: ../../standalone/drakgw:1
#, c-format
msgid "disable"
msgstr "matikan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr "Kerjakan!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "%s not responding"
msgstr "tak ada respon %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "Pilih model secara manual"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "Format"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Cara yang umum untuk terkoneksi ke adsl adalah dengan menggunakan pppoe.\n"
"Namun ada juga yang menggunakan pptp, dan ada yang pakai dhcp saja.\n"
"Bila ragu, pilih saja 'gunakan pppoe'"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "Macam-macam"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr "Zip"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Left Alt key"
msgstr "kunci Alt Kanan"

#: ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "Load setting"
msgstr "setting muatan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake tak dapat menentukan model printer %s Anda. Pilihlah model yg "
"benar dari daftar."

#: ../../standalone/printerdrake:1
#, fuzzy, c-format
msgid "Set selected printer as the default printer"
msgstr "Set printer ini sebagai standar"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Tandai printer yg ingin Anda transfer lalu klik\"Transfer\"."

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "Albania"

#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr "Lithuania"

#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "Kompak"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected model: %s %s"
msgstr "Terdeteksi model: %s %s"

#: ../advertising/03-software.pl:1
#, c-format
msgid "MandrakeSoft has selected the best software for you"
msgstr "MandrakeSoft telah memilih software terbaik utk Anda"

#: ../../any.pm:1
#, c-format
msgid "Local files"
msgstr "File lokal"

#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "hmm.."

#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr "Panama"

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Can't open %s!"
msgstr "%s di %s tak tercari"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Kartu grafik Anda tak punya konektor TV-OUT.\n"
"Ia dapat dikonfigurasikan agar bekerja menggunakan frame-buffer.\n"
"\n"
"Untuk ini Anda harus menyambung kartu grafik ke TV sebelum memboot "
"komputer.\n"
"Lalu pilih entri \"TVout\" di bootloader\n"
"\n"
"Anda punya fitur ini?"

#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Anda akan menset up pencetakan ke account Mindows dengan katasandi. "
"Berhubung kesalahan arsitekture piranti lunak klien Samba, katasandi "
"ditampilkan dalam teks di baris perintah klien Samba untuk mengirim job "
"cetak ke server Mindows. Ini memungkinkan tiap pengguna di mesin ini melihat "
"katasandi di layar dengan perintah \"ps auxwww\".\n"
"\n"
"Kami anjurkan beberapa alternatif berikut (pada semua kasus Anda harus yakin "
"bahwa hanya mesin di jaringan lokal Anda yang dapat mengakses server Mindows "
"Anda, misalnya dengan adanya firewall):\n"
"\n"
"Pakailah account tanpa-katasandi di server Mindows Anda, sebagai account "
"\"GUEST\" atau account khusus untuk pencetakan. Jangan hapus proteksi "
"katasandi account pribadi atau administrator.\n"
"\n"
"Set up server Mindows Anda agar printer dapat dipakai dengan protokol LPD. "
"Laluset up pencetakan dari mesin ini dengan tipe koneksi \"%s\" di "
"Printerdrake.\n"
"\n"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 ribu warna (16 bit)"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Simpan di Hard drive di path: %s\n"

#: ../../standalone/drakfont:1
#, c-format
msgid "Remove fonts on your system"
msgstr "Hapus font di sistem Anda"

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"Awas, adaptor network (%s) telah terkonfigurasikan.\n"
"\n"
"Anda ingin konfigurasi ulang otomatis?\n"
"\n"
"Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan."

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "Antarmuka grafis saat startup"

#: ../../network/netconnect.pm:1
#, c-format
msgid " adsl"
msgstr " adsl"

#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Partisi tidak cukup untuk level RAID %d\n"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "format of floppies supported by the drive"
msgstr "Format disket yg di-support oleh drive"

#: ../../network/tools.pm:1
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "local config: true"
msgstr "tak dikonfigurasikan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Printer berikut telah dikonfigurasikan. Klik-dobel printer utk memodifikasi "
"setting; membuatnya printer default; atau melihat info tentangnya."

#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
#, c-format
msgid "Connected"
msgstr "Tersambung"

#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "Macedonia"

#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr "Mali"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr "Pengontrol sistem dan bridge"

#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Save"
msgstr "/File/_Simpan"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "No details"
msgstr "Tanpa Detil"

#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "amat bagus"

#: ../../standalone/draksplash:1
#, c-format
msgid "Preview"
msgstr "Prapandang"

#: ../../standalone/drakbug:1
#, c-format
msgid "Remote Control"
msgstr "Kontrol Remote"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Please select media for backup..."
msgstr "Pilih media backup..."

#: ../../standalone/logdrake:1
#, c-format
msgid "Wrong email"
msgstr "Salah email"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "Server XFree86: %s\n"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Allow Thin Clients"
msgstr "Izinkan Klien Thin"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgia (layout \"Rusia\")"

#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#: ../../standalone/printerdrake:1
#, c-format
msgid "/_Options"
msgstr "/_Pilihan"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "Model printer Anda"

#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(PERINGATAN! Anda menggunakan XFS untuk partisi root,\n"
"pembuatan bootdisk di disket 1.44 Mb mungkin gagal,\n"
"karena XFS perlu driver amat besar)."

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Hapus file tar harddisk setelah backup.\n"

#: ../../standalone/drakpxe:1
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""
"Image CD atau DVD tak ditemukan, copy-lah program instalasi dan file rpm."

#: ../advertising/04-configuration.pl:1
#, c-format
msgid "Mandrake's multipurpose configuration tool"
msgstr "Konfigurator multiguna Mandrake"

#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1
#, c-format
msgid "Save"
msgstr "Simpan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is unsupported"
msgstr "%s tak disupport"

#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Muat driver piranti USB"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Disk"
msgstr "Disk"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "Masukkan URI device printer"

#: ../advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work of the "
"worldwide Linux Community."
msgstr ""
"Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda "
"adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia"

#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "Palestina"

#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "Guiana Perancis"

#: ../../lang.pm:1
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A command line must be entered!"
msgstr "Perintah baris harus diisi!"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Select user manually"
msgstr "Pilih pengguna secara manual"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "Transfer konfigurasi printer"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Anda ingin mengaktifkan pencetakan di printer tersebut di atas?\n"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check additions/removals of suid root files"
msgstr "jika diset ya, cek tambahan/hapusan file root suid."

#: ../../any.pm:1
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Agar dapat bekerja dg PDC W2K, Anda mungkin perlu minta tolong admin "
"menjalankan: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
"everyone / add dan me-reboot server.\n"
"Anda mungkin juga perlu namapengguna/katasandi Admin Domain utk mengikutkan "
"mesin ke domain Mindows(TM).\n"
"Jika jaringan belum aktif, Drakx akan mencoba ikut domain setelah tahapan "
"setup jaringan.\n"
"Jika setup dan otentikasi domain gagal, jalankan 'smbpasswd -j DOMAIN -U USER"
"%%PASSWORD' menggunakan Domain Mindows(tm) Anda, dan Namapengguna/Katasandi "
"Admin, setelah boot system.\n"
"Perintah 'wbinfo -t' akan mengetes apakah rahasia otentikasi Anda baik."

#: ../../printer/main.pm:1
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Port %s)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use network connection to backup"
msgstr "Pakai koneksi jaringan utk backup"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid "Kernel version"
msgstr "versi kernel"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various groups, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' group installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the applications that are in the workstation group.\n"
"\n"
" * \"%s\": if plan on using your machine for programming, choose the\n"
"appropriate packages from that group.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Kini kita tentukan program yg akan diinstal. Ribuan paket tersedia, dan\n"
"aplikasi sejenis telah dikelompokkan.\n"
"\n"
"Paket disortir menurut grup sesuai kegunaan mesin Anda.\n"
"Grup diurutkan ke dalam empat bagian:\n"
"\n"
" * \"Workstation\": jika Anda ingin menggunakan mesin Anda sbg workstation, "
"pilih\n"
"satu/lebih grup yg sesuai.\n"
"\n"
" * \"Pengembangan\": jika mesin akan digunakan utk pemrograman, pilih grup\n"
"yg diinginkan.\n"
"\n"
" * \"Server\": jika mesin diinginkan menjadi server, Anda dapat\n"
"memilih servis paling umum yg akan diinstal.\n"
"\n"
" * \"Lingkungan Grafis\": di sini Anda memilih lingkungan grafis. Minimal "
"Anda\n"
"harus pilih satu jika ingin punya workstation grafis!\n"
"\n"
"Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama grup.\n"
"Jika Anda tak memilih satu grup pun saat melakukan instalasi normal (bukan\n"
"upgrade) dialog akan muncul dengan menu instalasi minimal:\n"
"\n"
" * \"Dengan X\" Instal paket minimal yang memungkinkan kerja dengan desktop\n"
"grafis;\n"
"\n"
" * \"Dengan dokumentasi dasar\" Instal sistem plus peralatan dasar dan\n"
"dokumentasinya. Instalasi ini cocok untuk setup server.\n"
"\n"
" * \"Benar-benar instalasi minim\" Hanya instal kebutuhan minimum sistem,\n"
"dalam baris perintah saja. Butuh sekitar 65Mb.\n"
"\n"
"Anda dapat memilih \"Pilih paket sendiri\", berguna jika Anda tahu baik\n"
"paket yg disediakan atau ingin mengontrol instalasi secara total.\n"
"\n"
"Jika Anda memulai instalasi dg mode \"Upgrade\", Anda dapat melepas seleksi\n"
"semua group utk menghindari instalasi paket baru. Ini berguna utk reparasi\n"
"atau update sistem yg ada."

#: ../../any.pm:1 ../../help.pm:1
#, c-format
msgid "Accept user"
msgstr "Buat pengguna baru"

#: ../../help.pm:1 ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "Server"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Left Shift key"
msgstr "Kunci \"Mindows\" kiri"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid " local network"
msgstr "Jaringan lokal"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "Pilihan salah, silakan ulangi\n"

#: ../../security/l10n.pm:1
#, c-format
msgid "Syslog reports to console 12"
msgstr "Syslog dilaporkan ke konsol 12"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search new servers"
msgstr "Cari server baru"

#: ../../lang.pm:1
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Kepulauan Heard dan McDonald"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "Tiada driver alternatif"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "Ubah ke modus ahli"

#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr "(di mesin ini)"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Alamat gateway harus dalam format 1.2.3.4"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr "Winmode basis \"%s\" terdeteksi, ingin instal software yg diperlukan?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "Paket terinstal sedang dicari..."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Differential Backups"
msgstr "Gunakan Backup Diferensial"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Driver"
msgstr "Driver"

#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf kadang bekerja keras saat boot utk perawatan konfigurasi sistem."

#: ../../standalone/drakbackup:1
#, c-format
msgid "DVD-R device"
msgstr "device DVDR"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "Printer di server lpd remote"

#: ../../standalone/drakfont:1
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di "
"sistem Anda.\n"
"\n"
"-Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat "
"membuat server X Anda hang."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot adalah pemuat boot utk hardware NewWorld MacIntosh. Ia mampu memboot\n"
"GNU/Linux, MacOS maupun MacOSX. Biasanya, MacOS dan MacOSX terdeteksi dan\n"
"terinstal dengan benar. Jika tidak, Anda dapat menambahkan entri secara "
"manual\n"
"di layar ini. Hati-hati memilih parameter.\n"
"\n"
"Opsi utama yaboot adalah:\n"
"\n"
" * Pesan Awal: pesan teks yang ditampilkan sebelum prompt boot.\n"
"\n"
" * Device Boot: menunjukkan tempat Anda ingin meletakkan info yg diperlukan\n"
"utk memboot GNU/LInux. Biasanya Anda men-setup partisi bootstrap lebih dulu\n"
"untuk menyimpan informasi ini.\n"
"\n"
" * Delay Open Firmware: tak seperti LILO, ada dua macam delay di\n"
"yaboot. Delay pertama diukur dalam detik dan di sini Anda bisa memilih CD,\n"
"boot OF, MacOS, atau Linux.\n"
"\n"
" * Timeout Boot Kernel: timeout ini mirip delay boot LILO. Setelah memilih\n"
"Linux, akan ada delay 0.1 detik sebelum kernel default Anda dipilih.\n"
"\n"
" * Aktifkan boot CD?: opsi ini memungkinkan Anda memilih \"C\" (CD) pada\n"
"prompt boot pertama.\n"
"\n"
" * Aktifkan boot OF?: dg opsi ini Anda bisa memilih \"N\" (Open Firmware)\n"
"saat prompt boot pertama.\n"
"\n"
" * OS Standar: Anda dapat memilih OS yang akan diboot secara default saat\n"
"delay Open Firmware terlampaui."

#: ../../standalone/drakbackup:1
#, c-format
msgid "Wednesday"
msgstr "Rabu"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "Jerman"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "Austria"

#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "Tidak pakai mouse"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Choose your CD/DVD media size (MB)"
msgstr "Pilih ukuran media CD/DVD Anda"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Check permissions of files in the users' home"
msgstr "jika diset ya, cek izin file-file di home pengguna."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr "Jalankan \"sndconfig\" setelah instalasi untuk konfigurasi kartu suara"

#: ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "Tutup Tree"

#: ../../standalone/drakautoinst:1
#, c-format
msgid "Auto Install Configurator"
msgstr "Konfigurasi Instalasi Otomatis"

#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "Konfigurasi jaringan"

#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Bootloader akan diinstal di mana?"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will be installed. Additionally, the\n"
"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
"however that this is an experimental feature. If you select different\n"
"languages requiring different encoding the unicode support will be\n"
"installed anyway.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Pilihan bahasa mempengaruhi bahasa dokumentasi, instalasi dan sistem pada\n"
"umumnya. Pilih daerah tempat Anda berada, lalu bahasa yg Anda ucapkan.\n"
"\n"
"Klik \"Tambahan\" utk memilih bahasa-bahasa lain yg akan diinstal di\n"
"workstation Anda. Hal ini akan menginstal file spesifik-bahasa dokumentasi\n"
"sistem dan aplikasi. Misalnya jika Anda menginapkan pengguna dari Spanyol\n"
"di mesin Anda, pilih bhs Indonesia sbg bahasa utama di tampilan pohon dan\n"
"di bagian Tambahan pilih \"Spanyol\".\n"
"\n"
"Anda dapat menginstal banyak, bahkan semua bahasa dg menandai kotak \"Semua\n"
"bahasa\". Terjemahan, font, tes ejaan, dll. yg terkait dg suatu bahasa akan\n"
"diinstal. Sbg tambahan, unicode (UTF-8) akan dijadikan standar sistem jika\n"
"\"Pakai Unicode sebagai standar\" ditandai. Awas, ini masih dalam tahap\n"
"percobaan. Jika Anda memilih bahasa lain yg memerlukan encoding lain,\n"
"support unicode akan diinstal.\n"
"\n"
"Utk men-switch bahasa, sbg \"root\" luncurkan \"/usr/sbin/localedrake\" utk\n"
"mengganti bahasa yg digunakan oleh keseluruhan sistem. Jika dijalankan\n"
"sbg pengguna normal, bahasa yg diubah hanyalah bagi pengguna tersebut."

#: ../../standalone/scannerdrake:1
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr "Tiada support utk %s pada Linux Mandrake versi ini."

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "tape"
msgstr "Tape"

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP client"
msgstr "Klien DHCP"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""
"Argumen: (arg)\n"
"\n"
"Izinkan/Larang daftar pengguna sistem di manajer display (kdm dan gdm)."

#: ../../mouse.pm:1
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (serial, old C7 type)"

#: ../../partition_table.pm:1
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Proses restore dari file %s gagal: %s"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Tabel partisi %s rusak tak terbaca :(\n"
"Partisi buruk dapat dicoba dihapus (SEMUA DATA AKAN HILANG!).\n"
"Solusi lainnya adalah melarang DrakX memodifikasi tabel partisi.\n"
"(pesan errornya adalah %s)\n"
"\n"
"Anda setuju untuk menghapus semua partisi?\n"

#: ../../standalone/drakbug:1
#, fuzzy, c-format
msgid "Find Package"
msgstr "%d paket"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Anda yakin ingin men-setup pencetakan di mesin ini?\n"

#: ../../standalone/harddrake2:1
#, c-format
msgid "New devfs device"
msgstr "Device devfs baru"

#: ../../standalone/drakbackup:1
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr "ERROR: Tak dapat menghasilkan %s."

#: ../../standalone/drakboot:1
#, c-format
msgid "Boot Style Configuration"
msgstr "Konfigurasi Tipe Boot"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "sinkronisasi waktu otomatis (dg NTP)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup files not found at %s."
msgstr "File backup tak ditemukan di %s."

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (phonetic)"
msgstr "Armenia (fonetik)"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Card model:"
msgstr "Model kartu :"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Thin Client"
msgstr "Klien Thin"

#: ../advertising/01-thanks.pl:1
#, c-format
msgid "Thank you for choosing Mandrake Linux 9.2"
msgstr "Terima kasih memilih Mandrake Linux 9.2"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Start Server"
msgstr "Jalankan Server"

#: ../../lang.pm:1
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "All remote machines"
msgstr "Semua mesin remote"

#: ../../standalone/drakboot:1
#, c-format
msgid "Install themes"
msgstr "Instal tema"

#: ../../help.pm:1
#, c-format
msgid "Espanol"
msgstr "Spanyol"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing installation"
msgstr "Sedang menyiapkan instalasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected host/network"
msgstr "Edit host/jaringan terpilih"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Add User -->"
msgstr "Tambah pengguna -->"

#: ../../lang.pm:1
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: ../../standalone/drakfont:1
#, c-format
msgid "True Type fonts installation"
msgstr "Instalasi font True Tupe"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "Deteksi printer yang terhubung dengan jaringan lokal"

#: ../../standalone/drakconnect:1
#, c-format
msgid "LAN configuration"
msgstr "konfigurasi LAN"

#: ../../standalone/harddrake2:1
#, c-format
msgid "hard disk model"
msgstr "model harddisk"

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""
"        - Rawat /etc/exports:\n"
"        \t\tClusternfs memungkinkan ekspor sistem file root ke klien "
"diskless. drakTermServ\n"
"        \t\tmensetup entri utk mengizinkan akses anonim ke sistem file root\n"
"        \t\tdari klien diskless.\n"
"\n"
"        \t\tContoh entri ekspor clusternfs:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tDg SUBNET/MASK terdefinisikan utk jaringan Anda."

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Anda tak dapat menggunakan LVM Logical Volume untuk titik mount %s."

#: ../../standalone/drakfont:1
#, c-format
msgid "Get Windows Fonts"
msgstr "Ambil Font Windows"

#: ../../mouse.pm:1
#, c-format
msgid "Mouse Systems"
msgstr "Sistem Mouse (serial)"

#: ../../standalone/drakclock:1
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Iranian"
msgstr "Iran"

#: ../../lang.pm:1
#, c-format
msgid "Croatia"
msgstr "Kroasia"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Gateway:"
msgstr "Gateway:"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add server"
msgstr "Tambah server"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name"
msgstr "Nama printer remote"

#: ../advertising/10-security.pl:1
#, c-format
msgid ""
"MandrakeSoft has designed exclusive tools to create the most secured Linux "
"version ever: Draksec, a system security management tool, and a strong "
"firewall are teamed up together  in order to highly reduce hacking risks."
msgstr ""
"MandrakeSoft telah mendesain alat eksklusif utk membuat versi Linux teraman: "
"Draksec (manajer keamanan sistem) & sebuah firewall kokoh dipadukan utk "
"menangkis hacker."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Device: "
msgstr "Device: "

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "License agreement"
msgstr "Persetujuan Lisensi"

#: ../../standalone/draksec:1
#, c-format
msgid "System Options"
msgstr "Opsi Sistem"

#: ../../security/level.pm:1
#, c-format
msgid "Please choose the desired security level"
msgstr "Pilih tingkat keamanan yg Anda inginkan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Host ini sudah terdaftar, tak dapat ditambahkan lagi.\n"

#: ../../printer/main.pm:1
#, c-format
msgid ", USB printer"
msgstr ", printer USB"

#: ../../standalone/drakfloppy:1
#, fuzzy, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"Gagal tutup mkbootdisk dg baik: \n"
" %s \n"
" %s"

#: ../../standalone/drakbackup:1
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""
"Backup incremental hanya menyimpan file yg telah berubah atau yg baru "
"semenjak backup terakhir."

#: ../../standalone/drakfont:1
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Pilih aplikasi yang mensupport font :"

#: ../../steps.pm:1
#, c-format
msgid "Configure X"
msgstr "Konfigurasi X"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "hd"
msgstr "Chad"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Turki (model \"F\" tradisional)"

#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
#: ../../standalone/scannerdrake:1
#, c-format
msgid "Congratulations!"
msgstr "Selamat!"

#: ../../standalone/drakperm:1
#, c-format
msgid "Use owner id for execution"
msgstr "Gunakan id pemilik utk eksekusi"

#: ../../security/l10n.pm:1
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr ""
"Argumen: (arg)\n"
"\n"
"Izinkan/Larang login root remote."

#: ../../standalone/drakperm:1
#, c-format
msgid "Down"
msgstr "Turun"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer (No driver)"
msgstr "Printer raw (tanpa driver)"

#: ../../network/modem.pm:1
#, c-format
msgid "Install rpm"
msgstr "Instal rpm"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Utk mencetak file dari baris perintah (window terminal) pakailah komando "
"komando \"%s <file>\" atau alat cetak grafis: \"xpp <file>\" atau \"kprinter "
"<file>\". Alat grafis memungkinkan Anda memilih printer dan memodifikasi "
"setting dengan mudah.\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
msgstr "Sisa waktu"

#: ../../keyboard.pm:1
#, c-format
msgid "UK keyboard"
msgstr "Keyboard UK"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Unmount"
msgstr "Unmount"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: ../../standalone/drakfont:1
#, c-format
msgid "Uninstall Fonts"
msgstr "Buang Font"

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Tunggu, tingkat keamanan sedang diset..."

#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
msgstr "Jerman (tanpa dead key)"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\tKirim mail ke %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transferring %s..."
msgstr "Pemindahan %s ..."

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 ribu warna (15 bit)"

#: ../../any.pm:1
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Anda dapat mengekspor dg NFS atau Samba. Pilih yg Anda ingin."

#: ../../lang.pm:1
#, c-format
msgid "Gambia"
msgstr "Gambia"

#: ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Control Center"
msgstr "Pusat Kontrol Mandrake"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1
#: ../../../move/move.pm:1
#, c-format
msgid "Reboot"
msgstr "Boot Ulang"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device"
msgstr ", alat multifungsi"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Anda dapat memasukkan berbagai port. \n"
"Contoh lazim adalah: 139/tcp 139/udp.\n"
"Informasi ada di /etc/services."

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Tape \n"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr ""
"Browser tak ditemukan. Silakan instal satu jika Anda ingin menjelajah sistem "
"pertolongan"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Remember this password"
msgstr "Ingat katasandi ini"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Internet Connection Sharing sudah aktif"

#: ../../standalone/drakbackup:1
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Network dg SSH.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
" Jika printer yg diinginkan terdeteksi, pilihlah dari daftar lalu tambahkan "
"nama pengguna, katasandi, dan/atau grupkerja jika perlu."

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid " cable"
msgstr "Tabel"

#: ../../help.pm:1 ../../install_interactive.pm:1
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Pakai ruang kosong pada partisi windows"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s ditemukan di %s, konfigurasikan secara otomatis?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "Driver XFree86: %s\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Host/jaringan ini sudah terdaftar, tak dapat ditambahkan lagi.\n"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
msgstr "Pilih paket yang akan diinstal"

#: ../../lang.pm:1
#, c-format
msgid "Papua New Guinea"
msgstr "Papua New Guinea"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr ", alat multifungsi di port paralel #%s"

#: ../../../move/tree/mdk_totem:1
#, fuzzy, c-format
msgid "Busy files"
msgstr "Backup file sistem"

#: ../../keyboard.pm:1
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Serbia (cyrillic)"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "Masukkan direktori tempat backup disimpan"

#: ../../standalone/draksplash:1
#, c-format
msgid "Make kernel message quiet by default"
msgstr "Matikan pesan kernel"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Ingin menset printer ini (\"%s\")\n"
"sbg printer standar?"

#: ../../standalone/drakgw:1
#, c-format
msgid "The DHCP end range"
msgstr "Kisar akhir DHCP"

#: ../../any.pm:1
#, c-format
msgid "Creating bootdisk..."
msgstr "Pembuatan bootdisk..."

#: ../../standalone/net_monitor:1
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Tes koneksi Anda..."

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing down the network"
msgstr "Matikan jaringan"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Login ID"
msgstr "Login ID"

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS adalah protokol populer untuk file sharing di TCP/IP\n"
"Servis ini memberikan fungsi file lock pada NFS."

#: ../../standalone/drakconnect:1
#, c-format
msgid "DHCP Client"
msgstr "Klien DHCP"

#: ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"Inilah HardDrake, alat konfigurasi hardware Mandrake.\n"
"Versi:"

#: ../../standalone/drakgw:1
#, c-format
msgid "dismiss"
msgstr "tutup"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Cetak/Scan di \"%s\""

#: ../../standalone/drakfloppy:1
#, c-format
msgid "omit raid modules"
msgstr "abaikan modul RAID"

#: ../../services.pm:1
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd adalah daemon printer yang jadi tulang punggung lpr. Dia\n"
"bertugas sebagai server yang memberi perintah kepada printer untuk mencetak."

#: ../../keyboard.pm:1
#, c-format
msgid "Irish"
msgstr ""

#: ../../standalone/drakbackup:1
#, c-format
msgid "Sunday"
msgstr "Minggu"

#: ../../standalone/drakconnect:1
#, c-format
msgid "Internet Connection Configuration"
msgstr "konfigurasi koneksi Internet"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated numbers"
msgstr "bilangan terpisah koma"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"Sekali memilih device, Anda akan dapat melihat info-nya di frame kanan "
"(\"Info\")"

#: ../../standalone/drakperm:1
#, c-format
msgid "Move selected rule up one level"
msgstr "Naikkan aturan terpilih satu level"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Scanner berikut\n"
"\n"
"%s\n"
"tersedia di sistem Anda.\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Anda ingin menghapus printer \"%s\"?"

#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
msgstr "Tiada ruang untuk instalasi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Default printer"
msgstr "Printer standar"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Anda mengkonfigurasi bbrp jalan utk koneksi Internet.\n"
"Pilih yg ingin Anda pakai.\n"
"\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Modify RAID"
msgstr "Ganti RAID"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Saya mendeteksi adanya sebuah card ISDN PCI, tapi saya tidak tahu tipenya. "
"Silakan pilih card PCI tersebut pada layar berikutnya."

#: ../../any.pm:1
#, c-format
msgid "Add user"
msgstr "Tambah pengguna"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID-disks %s\n"
msgstr "Disk RAID %s\n"

#: ../../lang.pm:1
#, c-format
msgid "Liberia"
msgstr "Liberia"

#: ../../standalone/scannerdrake:1
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""

#: ../../standalone/drakgw:1
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Masukkan nama antarmuka yg terhubung dg Internet.\n"
"\n"
"Misal:\n"
"\t\tppp+ utk modem atau koneksi DSL, \n"
"\t\teth0, atau eth1 utk koneksi kabel, \n"
"\t\tippp+ utk koneksi isdn.\n"

#: ../../steps.pm:1
#, c-format
msgid "Choose your keyboard"
msgstr "Pilih papanketik"

#: ../../steps.pm:1
#, c-format
msgid "Format partitions"
msgstr "Melakukan format partisi"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Koreksi otomatis konfigurasi CUPS"

#: ../../standalone/harddrake2:1
#, c-format
msgid "Running \"%s\" ..."
msgstr "Jalankan \"%s\"..."

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
msgstr "aktifkan support radio"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Sharing scanner ke host: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: %s"
msgstr "Nama file loopback: %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Pilihlah printer tempat job cetak harus disalurkan."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not transfer printers"
msgstr "Jangan transfer printer"

#: ../../help.pm:1
#, fuzzy, c-format
msgid "Delay before booting the default image"
msgstr "Delay sebelum boot ke image default"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Use Hard Disk to backup"
msgstr "Pakai Hard Disk utk backup"

#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakboot:1
#, c-format
msgid "Configure"
msgstr "Konfigurasikan"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: ../../standalone/drakconnect:1
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr "Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda"

#: ../../standalone/drakbackup:1
#, c-format
msgid "Backup Users"
msgstr "Backup Pengguna"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Masukkan nama host Anda.\n"
"Hostname (nama komputer) sebaiknya merupakan nama host yg fully-qualified\n"
"misalnya ``mesin.lab.grup.com''.\n"
"Anda juga bisa masukkan alamat IP gateway kalau ada"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Spooler"
msgstr "Pilih spooler printer"

#: ../../standalone/drakboot:1
#, c-format
msgid "Create new theme"
msgstr "Buat tema baru"

#: ../../standalone/logdrake:1
#, c-format
msgid "Mandrake Tools Explanation"
msgstr "Penjelasan Piranti Mandrake"

#: ../../standalone/drakpxe:1
#, c-format
msgid "No image found"
msgstr "Image tak ditemukan"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Ada paket penting yang tak benar diinstal.\n"
"Mungkin drive cdrom atau cdromnya yang rusak.\n"
"Cek dulu cdromnya di komputer yang sudah terinstal Linux dengan\n"
"perintah \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: ../advertising/06-development.pl:1
#, c-format
msgid "Mandrake Linux 9.2: the ultimate development platform"
msgstr "Mandrake Linux adalah platform bangun terampuh"

#: ../../standalone/scannerdrake:1
#, c-format
msgid "Detected model: %s"
msgstr "Model terdeteksi: %s"

#: ../../standalone/logdrake:1
#, c-format
msgid "\"%s\" is not a valid email!"
msgstr "email \"%s\" invalid!"

#: ../../standalone/drakedm:1
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"Manajer Display X11 memungkinkan Anda login dg Sistem Window X dan\n"
"menjalankan banyak sesi X di mesin lokal secara bersamaan."

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "jika ya, jalankan cek keamanan harian."

#: ../../lang.pm:1
#, c-format
msgid "Azerbaijan"
msgstr "Azerbaijan"

#: ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Device name to use for backup"
msgstr "Masukkan nama alat utk backup"

#: ../../standalone/drakbackup:1
#, c-format
msgid "No tape in %s!"
msgstr "Tak ada pita di %s!"

#: ../../standalone/drakhelp:1
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../standalone/harddrake2:1
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "ini adalah bus fisik tempat alat tersambung (mis: PCI, USB, ...)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "How is the printer connected?"
msgstr "Bagaimana printer ini disambung ke komputer?"

#: ../../security/level.pm:1
#, c-format
msgid "Security level"
msgstr "Tingkat keamanan"

#: ../../standalone/draksplash:1
#, c-format
msgid "final resolution"
msgstr "resolusi akhir"

#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services"
msgstr "Servis"

#: ../../../move/move.pm:1
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Konfigurasi pribadi"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Komputer Kantor"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Program office: pengolah kata (kword, abiword), spreadsheet (kspread, "
"gnumeric), viewer pdf,dsb"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Komputer Game"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Program permainan: arcade, board, strategi, dsb"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Komputer Multimedia"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Program untuk memainkan/mengedit suara dan video"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Komputer Internet"

#: ../../share/compssUsers:999
#, fuzzy
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, "
"tin..) dan untuk membrowse Web"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Komputer Jaringan (klien)"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klien untuk berbagai protokol, termasuk ssh"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfigurasi"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Alat untuk memudahkan konfigurasi komputer."

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Aplikasi Ilmu pengetahuan"

#: ../../share/compssUsers:999
msgid "Scientific applications such as gnuplot"
msgstr "Aplikasi ilmiah semacam gnuplot"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Alat konsol"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Editor, shell, tool untuk file, terminal"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "Workstation KDE"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool "
"yang menyertainya"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Stasiunkerja Gnome"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah "
"digunakan"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Desktop Grafis lainnya"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, dsb"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "Librari, program, dan file include untuk pemrograman C dan C++"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentasi"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Buku dan Howto untuk Linux dan Free Software"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr "LSB"

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr "Basis Standar Linux. Tunjangan aplikasi partai ketiga"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Server, Web/FTP"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache dan Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Mail"
msgstr "Mail"

#: ../../share/compssUsers:999
msgid "Postfix mail server"
msgstr "Server mail Postfix"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Database"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "Server database PostgreSQL atau MySQL"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Server, Firewall/Router"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Gerbang Internet"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS "

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Nama Domain dan Server Info Network (NIS)"

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Komputer Server Jaringan"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "server NFS, SMB, Proxy, SSH"

#: ../../share/compssUsers:999
msgid "Set of tools to read and send mail and news and to browse the Web"
msgstr "Kumpulan tool utk membaca, mengirim email dan news serta membrowse Web"


#~ msgid "The setup has already been done, and it's currently enabled."
#~ msgstr "Konfigurasi telah selesai.Namun sekarang sudah aktif."

#~ msgid "Logs"
#~ msgstr "Log"

#~ msgid "The setup has already been done, but it's currently disabled."
#~ msgstr "Konfigurasi telah seleasi.Namun sekarang masih dimatikan."

#~ msgid "Profile "
#~ msgstr "Profil "

#~ msgid ""
#~ "Welcome to the Internet Connection Sharing utility!\n"
#~ "\n"
#~ "%s\n"
#~ "\n"
#~ "Click on Configure to launch the setup wizard."
#~ msgstr ""
#~ "Selamat datang di utiliti Internet Connection Sharing!\n"
#~ "\n"
#~ "%s\n"
#~ "\n"
#~ "Klik Konfigurasikan untuk mulai."

#~ msgid "Internet Connection Sharing configuration"
#~ msgstr "Konfigurasi Sharing Koneksi Internet"

#~ msgid "No Internet Connection Sharing has ever been configured."
#~ msgstr "Internet Connection Sharing belum pernah dikonfigurasikan"

#~ msgid "when checked, owner and group won't be changed"
#~ msgstr "jika dipilih, pemilik dan grup takkan diubah"

#~ msgid ""
#~ "XawTV isn't installed!\n"
#~ "\n"
#~ "\n"
#~ "If you do have a TV card but DrakX has neither detected it (no bttv nor "
#~ "saa7134\n"
#~ "module in \"/etc/modules\") nor installed xawtv, please send the\n"
#~ "results of \"lspcidrake -v -f\" to \"install@mandrakesoft.com\"\n"
#~ "with subject \"undetected TV card\".\n"
#~ "\n"
#~ "\n"
#~ "You can install it by typing \"urpmi xawtv\" as root, in a console."
#~ msgstr ""
#~ "XawTV tak diinstal!\n"
#~ "\n"
#~ "\n"
#~ "Jika Anda punya kartu TV tapi DrakX tak dapat mendeteksinya (modul bttv\n"
#~ "atau saa7134 tak terdapat di \"/etc/modules\") atau xawtv terinstal, "
#~ "kirimkan\n"
#~ "hasil \"lspcidrake -v -f\" ke \"install@mandrakesoft.com\"\n"
#~ "dengan subject \"undetected TV card\".\n"
#~ "\n"
#~ "\n"
#~ "Anda dapat menginstalnya dg menuliskan \"urpmi xawtv\" sbg root di konsol."

#~ msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
#~ msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"

#~ msgid "Remote Printers"
#~ msgstr "Printer Remote"

#~ msgid "Printing system: "
#~ msgstr "Sistem cetak: "

#~ msgid "Bad Ip"
#~ msgstr "Ip Buruk"

#~ msgid "Output"
#~ msgstr "Keluaran"

#~ msgid ""
#~ "Please choose the\n"
#~ "media for backup."
#~ msgstr "Pilih media backup."

#~ msgid ""
#~ "Directory (or module) to\n"
#~ " put the backup on this host."
#~ msgstr ""
#~ "Direktori (atau modul) utk\n"
#~ " meletakkan backup di host ini."

#~ msgid "LiLo and Bootsplash themes installation successfull"
#~ msgstr "Instalasi tema LiLo dan Bootsplash sukses"

#~ msgid "Choose your CD/DVD media size (Mb)"
#~ msgstr "Pilih ukuran media CD/DVD (Mb)"

#~ msgid ""
#~ "We are now going to configure the %s connection.\n"
#~ "\n"
#~ "\n"
#~ "Press \"Forward\" to continue."
#~ msgstr ""
#~ "Konfigurasi koneksi %s akan dilaksanakan.\n"
#~ "\n"
#~ "\n"
#~ "Tekan \"Maju\" utk melanjutkan."

#~ msgid ""
#~ "Backup quota exceeded!\n"
#~ "%d Mb used vs %d Mb allocated."
#~ msgstr ""
#~ "Quota backup terlampaui!\n"
#~ "terpakai %d Mb, alokasi %d Mb."

#~ msgid ""
#~ "Failed to check filesystem %s. Do you want to repair the errors? (beware, "
#~ "you can loose data)"
#~ msgstr ""
#~ "Gagal mencek sistem file %s. Ingin direparasi? (awas, data Anda bisa "
#~ "hilang)"

#~ msgid "Please relog into %s to activate the changes"
#~ msgstr "Silakan masuk lagi ke %s untuk mengaktifkan perubahan"

#~ msgid "\tLimit disk usage to %s Mb\n"
#~ msgstr "\tBatas penggunaan disk %s Mb\n"

#~ msgid ""
#~ "Create/Transfer\n"
#~ "backup keys for SSH"
#~ msgstr ""
#~ "Buat/Transfer\n"
#~ "kunci cadangan SSH"

#~ msgid ""
#~ "Enter the maximum size\n"
#~ " allowed for Drakbackup (Mb)"
#~ msgstr ""
#~ "Masukkan ukuran maximum\n"
#~ " yg diizinkan utk Drakbackup (Mb)"

#~ msgid ""
#~ "Please choose the time \n"
#~ "interval between each backup"
#~ msgstr "Pilih interval waktu backup"

#~ msgid ""
#~ "Other (not drakbackup)\n"
#~ "keys in place already"
#~ msgstr ""
#~ "Kunci lain (bukan drakbackup)\n"
#~ "sudah ada di tempat"

#~ msgid "Saami (swedish/finish)"
#~ msgstr "Saami (swedia/finlandia)"

#~ msgid "Unkown driver"
#~ msgstr "Driver tak dikenal"

#~ msgid "Filename to search for (wildcards allowed):"
#~ msgstr "Nama file yg akan dicari (wildcard boleh dipakai):"

#~ msgid "Start Search..."
#~ msgstr "Cari..."

#~ msgid ""
#~ "Maximum size\n"
#~ " allowed for Drakbackup (Mb)"
#~ msgstr ""
#~ "Ukuran maximum\n"
#~ " yg diizinkan utk Drakbackup (Mb)"

#~ msgid ""
#~ "  Transfer  \n"
#~ "Now"
#~ msgstr ""
#~ "  Transfer  \n"
#~ "Sekarang"

#~ msgid ""
#~ "Please be sure that the cron daemon is included in your services. \n"
#~ "\n"
#~ "Note that currently all 'net' medias also use the hard drive."
#~ msgstr ""
#~ "Pastikan daemon cron masuk dalam daftar servis.\n"
#~ "\n"
#~ "Ingat bahwa kini semua media 'net' juga menggunakan harddisk."

#~ msgid ""
#~ "Description:\n"
#~ "\n"
#~ "  Drakbackup is used to backup your system.\n"
#~ "  During the configuration you can select: \n"
#~ "\t- System files, \n"
#~ "\t- Users files, \n"
#~ "\t- Other files.\n"
#~ "\tor All your system ...  and Other (like Windows Partitions)\n"
#~ "\n"
#~ "  Drakbackup allows you to backup your system on:\n"
#~ "\t- Harddrive.\n"
#~ "\t- NFS.\n"
#~ "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
#~ "\t- FTP.\n"
#~ "\t- Rsync.\n"
#~ "\t- Webdav.\n"
#~ "\t- Tape.\n"
#~ "\n"
#~ "  Drakbackup allows you to restore your system to\n"
#~ "  a user selected directory.\n"
#~ "\n"
#~ "  Per default all backups will be stored on your\n"
#~ "  /var/lib/drakbackup directory\n"
#~ "\n"
#~ "  Configuration file:\n"
#~ "\t/etc/drakconf/drakbackup/drakbackup.conf\n"
#~ "\n"
#~ "Restore Step:\n"
#~ "  \n"
#~ "  During the restore step, DrakBackup will remove \n"
#~ "  your original directory and verify that all \n"
#~ "  backup files are not corrupted. It is recommended \n"
#~ "  you do a last backup before restoring.\n"
#~ "\n"
#~ "\n"
#~ msgstr ""
#~ "Penjelasan:\n"
#~ "\n"
#~ "  Drakbackup digunakan untuk membackup system Anda.\n"
#~ "  Selama konfigurasi Anda dapat memilih: \n"
#~ "\t- File System, \n"
#~ "\t- File Pengguna, \n"
#~ "\t- File Lain-lain.\n"
#~ "\tatau Seluruh sistem ...  dan Lain-lain (mis. partisi Windows)\n"
#~ "\n"
#~ "  Drakbackup dapat melakukan backup sistem di:\n"
#~ "\t- Harddisk.\n"
#~ "\t- NFS.\n"
#~ "\t- CDROM (CDRW), DVDROM (dg autoboot, rescue dan autoinstall.).\n"
#~ "\t- FTP.\n"
#~ "\t- Rsync.\n"
#~ "\t- Webdav.\n"
#~ "\t- Tape.\n"
#~ "\n"
#~ "  Drakbackup dapat merestorasi sistem Anda ke\n"
#~ "  direktori pilihan pengguna.\n"
#~ "\n"
#~ "  Aslinya semua backup ditempatkan di direktori\n"
#~ "  /var/lib/drakbackup\n"
#~ "\n"
#~ "  File konfigurasi:\n"
#~ "\t/etc/drakconf/drakbackup/drakbackup.conf\n"
#~ "\n"
#~ "\n"
#~ "Tahap Restorasi:\n"
#~ "  \n"
#~ "  Saat restorasi, DrakBackup akan menghapus \n"
#~ "  direktori asli Anda dan mencek bahwa semua file \n"
#~ "  backup tak rusak. Disarankan Anda melakukan \n"
#~ "  backup sebelumnya.\n"
#~ "\n"
#~ "\n"

#~ msgid "Please check if you want to use the non-rewinding device."
#~ msgstr "Cek apakah Anda ingin menggunakan alat non-rewinding."

#~ msgid "Please enter your password"
#~ msgstr "Masukkan katasandi"

#~ msgid ""
#~ "\n"
#~ " Some errors during sendmail are caused by \n"
#~ " a bad configuration of postfix. To solve it you have to\n"
#~ " set myhostname or mydomain in /etc/postfix/main.cf\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ " Beberapa error saat sendmail disebabkan oleh \n"
#~ " konfigurasi buruk postfix. Utk mengatasinya \n"
#~ " myhostname atau mydomain di /etc/postfix/main.cf harus diset\n"
#~ "\n"

#~ msgid ""
#~ "Please choose your CD/DVD device\n"
#~ "(Press Enter to propogate settings to other fields.\n"
#~ "This field isn't necessary, only a tool to fill in the form.)"
#~ msgstr ""
#~ "Pilih alat CD/DVD Anda\n"
#~ "(Tekan Enter untuk menyalurkan setting ke tempat isian lain.\n"
#~ "Field ini tak diperlukan, hanya alat utk mengisi formulir.)"

#~ msgid "Please check if you want to eject your tape after the backup."
#~ msgstr "Cek apakah Anda ingin meng-eject tape setelah backup."

#~ msgid "Please check if you want to erase your tape before the backup."
#~ msgstr "Cek apakah Anda ingin menghapus tape sebelum backup."

#~ msgid "Please enter the host name or IP."
#~ msgstr "Masukkan nama host atau IP."

#~ msgid ""
#~ " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s@epita."
#~ "fr>"
#~ msgstr ""
#~ " Hak cipta (C) 2001-2002 MandrakeSoft oleh DUPONT Sebastien "
#~ "<dupont_s@epita.fr>"

#~ msgid ""
#~ "\n"
#~ "Restore Backup Problems:\n"
#~ "\n"
#~ "During the restore step, Drakbackup will verify all your\n"
#~ "backup files before restoring them.\n"
#~ "Before the restore, Drakbackup will remove \n"
#~ "your original directory, and you will loose all your \n"
#~ "data. It is important to be careful and not modify the \n"
#~ "backup data files by hand.\n"
#~ msgstr ""
#~ "\n"
#~ "Problem Restore Backup:\n"
#~ "\n"
#~ "Saat tahap restore, Drakbackup akan mencek semua file\n"
#~ "backup sebelum menempatkannya kembali. Sebelum restore,\n"
#~ "Drakbackup akan menghapus direktori asli Anda, dan Anda\n"
#~ "akan kehilangan semua data. Hati-hati dan jangan mengubah\n"
#~ "file data backup secara manual.\n"

#~ msgid ""
#~ " updates 2002 MandrakeSoft by Stew Benedict <sbenedict@mandrakesoft.com>"
#~ msgstr ""
#~ " update 2002 MandrakeSoft oleh Stew Benedict <sbenedict@mandrakesoft.com>"

#~ msgid ""
#~ "Arguments: (arg, expr='*.*', dev='tty12')\n"
#~ "\n"
#~ "Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
#~ "expression describing what to log (see syslog.conf(5) for more details) "
#~ "and\n"
#~ "dev the device to report the log."
#~ msgstr ""
#~ "Argumen: (arg, expr='*.*', dev='tty12')\n"
#~ "\n"
#~ "Aktifkan/Matikan laporan syslog ke konsol 12. \\fIexpr\\fP adalah\n"
#~ "menjelaskan apa yg mesti dicatat (detilnya lihat syslog.conf(5)) dan\n"
#~ "dev alat tempat menulis catatan."

#~ msgid "edit"
#~ msgstr "edit"

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ " Accept/Refuse broadcasted icmp echo."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Terima/Tolak echo icmp siaran."

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Enable/Disable libsafe if libsafe is found on the system."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem."

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Allow/Forbid remote root login."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Izinkan/Larang login root remote."

#~ msgid "select perm file to see/edit"
#~ msgstr "pilih file izin yg akan dilihat/edit"

#~ msgid "path"
#~ msgstr "path"

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Enable/Disable the logging of IPv4 strange packets."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Aktifkan/Matikan log paket aneh IPv4."

#~ msgid ""
#~ "Arguments: (arg, alert=1)\n"
#~ "\n"
#~ "Enable/Disable IP spoofing protection."
#~ msgstr ""
#~ "Argumen: (arg, alert=1)\n"
#~ "\n"
#~ "Aktifkan/Matikan proteksi pemalsuan IP."

#~ msgid "permissions"
#~ msgstr "izin"

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Enable/Disable msec hourly security check."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Aktifkan/Matikan cek keamanan tiap jam oleh msec."

#~ msgid "delete"
#~ msgstr "hapus"

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Accept/Refuse bogus IPv4 error messages."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Terima/Tolak pesan error IPv4 yg tak benar."

#~ msgid ""
#~ "Arguments: (arg)\n"
#~ "\n"
#~ "Use password to authenticate users."
#~ msgstr ""
#~ "Argumen: (arg)\n"
#~ "\n"
#~ "Pakai katasandi utk membuktikan keaslian pengguna."

#~ msgid "user"
#~ msgstr "pengguna"

#~ msgid ""
#~ "Standard: This is the standard security recommended for a computer that "
#~ "will be used to connect\n"
#~ "               to the Internet as a client.\n"
#~ "\n"
#~ "High:       There are already some restrictions, and more automatic "
#~ "checks are run every night.\n"
#~ "\n"
#~ "Higher:    The security is now high enough to use the system as a server "
#~ "which can accept\n"
#~ "              connections from many clients. If your machine is only a "
#~ "client on the Internet, you\n"
#~ "           should choose a lower level.\n"
#~ "\n"
#~ "Paranoid:  This is similar to the previous level, but the system is "
#~ "entirely closed and security\n"
#~ "                features are at their maximum\n"
#~ "\n"
#~ "Security Administrator:\n"
#~ "               If the 'Security Alerts' option is set, security alerts "
#~ "will be sent to this user (username or\n"
#~ "            email)"
#~ msgstr ""
#~ "Standar: Keamanan standar utk komputer yg terhubung ke Internet sbg "
#~ "klien.\n"
#~ "\n"
#~ "Tinggi: Ada beberapa pembatasan, dan pemeriksaan otomatis tiap malam.\n"
#~ "\n"
#~ "Lebih Tinggi: Cukup aman utk dipakai sbg server yg menerima koneksi dari\n"
#~ "              banyak klien. Jika mesin Anda hanya klien Internet "
#~ "pilihlah\n"
#~ "\t      tingkat lebih rendah.\n"
#~ "\n"
#~ "Penakut: Mirip tingkat terdahulu, tapi sistem tertutup seluruhnya dan "
#~ "keamanan adalah maksimum\n"
#~ "\n"
#~ "Administrator Keamanan:\n"
#~ "               Jika opsi 'Pemberitahuan Keamanan' diset, berita keamanan "
#~ "akan dikirim ke pengguna ini\n"
#~ "\t       (nama pengguna atau email)"

#~ msgid "Expert Area"
#~ msgstr "Area Pakar"

#~ msgid "Wizard..."
#~ msgstr "Dukun..."

#~ msgid "Country"
#~ msgstr "Negara"

#~ msgid "Previous"
#~ msgstr "Kembali"

#~ msgid "help"
#~ msgstr "tolong"

#~ msgid "Please check if you are using CDRW media"
#~ msgstr "Periksa apakah Anda menggunakan media CDRW"

#~ msgid "Please check if you are using a DVDRAM device"
#~ msgstr "Periksa apakah Anda menggunakan alat DVDRAM"

#~ msgid "Please check if you are using a DVDR device"
#~ msgstr "Periksa apakah Anda menggunakan alat DVDR"

#~ msgid "Please check for multisession CD"
#~ msgstr "Mohon cek perihal CD multisession"

#~ msgid "We are now going to configure the %s connection."
#~ msgstr "Kita akan mengkonfigurasi koneksi %s."

#~ msgid "Name: %s\n"
#~ msgstr "Nama: %s\n"

#~ msgid ""
#~ "Which ISDN configuration do you prefer?\n"
#~ "\n"
#~ "* The Old configuration uses isdn4net. It contains powerful\n"
#~ "  tools, but is tricky to configure, and not standard.\n"
#~ "\n"
#~ "* The New configuration is easier to understand, more\n"
#~ "  standard, but with less tools.\n"
#~ "\n"
#~ "We recommand the light configuration.\n"
#~ msgstr ""
#~ "Konfigurasi ISDN mana yg Anda suka?\n"
#~ "\n"
#~ "* Konfigurasi lama menggunakan isdn4net, berisi alat perkasa,\n"
#~ "  tetapi tricky bagi pemula, dan tidak standar.\n"
#~ "\n"
#~ "* Konfigurasi baru lebih mudah dimengerti, lebih standar,\n"
#~ "  tapi dg alat lebih sedikit.\n"
#~ "\n"
#~ "Kami sarankan konfigurasi ringan.\n"
#~ "\n"

#~ msgid "New configuration (isdn-light)"
#~ msgstr "Konfigurasi baru (isdn-light)"

#~ msgid "Old configuration (isdn4net)"
#~ msgstr "Konfigurasi lama (isdn4net)"

#~ msgid "Internet connection & configuration"
#~ msgstr "Koneksi dan konfigurasi Internet"

#~ msgid "Disconnect"
#~ msgstr "Putus"

#~ msgid "Connect"
#~ msgstr "Tersambung"

#~ msgid ""
#~ "\n"
#~ "You can reconfigure your connection."
#~ msgstr ""
#~ "\n"
#~ "Anda bisa mengkonfigurasikan ulang koneksi ini"

#~ msgid ""
#~ "\n"
#~ "You can connect to the Internet or reconfigure your connection."
#~ msgstr ""
#~ "\n"
#~ "Anda bisa sambungkan koneksi ke Internet atau mengkonfigurasikan ulang."

#~ msgid "You are not currently connected to the Internet."
#~ msgstr "Anda sedang tidak terhubung ke Internet."

#~ msgid ""
#~ "\n"
#~ "You can disconnect or reconfigure your connection."
#~ msgstr ""
#~ "\n"
#~ "Anda bisa putuskan atau konfigurasi koneksi yang ada sekarang."

#~ msgid "You are currently connected to the Internet."
#~ msgstr "Sekarang Anda sedang terhubung ke Internet."

#~ msgid "files sending by FTP"
#~ msgstr "file dikirim dg FTP"

#~ msgid "Use incremental backup  (do not replace old backups)"
#~ msgstr "Pakai backup incremental (tidak menghapus backup lama)"

#~ msgid "Relaunch 'lilo'"
#~ msgstr "Luncur ulang 'lilo'"

#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
#~ msgstr "Buat initrd 'mkinitrd -f /boot/initrd-%s.img %s'."

#~ msgid "Copy %s to %s"
#~ msgstr "Salin %s ke %s"

#~ msgid "Backup %s to %s.old"
#~ msgstr "Backup %s ke %s.old"

#~ msgid "ttf fonts conversion"
#~ msgstr "konversi font ttf"

#~ msgid "Fonts conversion"
#~ msgstr "Konversi font"

#~ msgid "Author:"
#~ msgstr "Pengarang:"

#~ msgid "Audio station"
#~ msgstr "Pangkalan Audio"

#~ msgid "Sound playing/editing programs"
#~ msgstr "Program memainkan/mengedit suara"

#~ msgid "Video station"
#~ msgstr "Pangkalan Video"

#~ msgid "Video playing programs"
#~ msgstr "Program untuk memainkan/mengedit video"

#~ msgid "Graphic station"
#~ msgstr "Pangkalan Grafik"

#~ msgid "Graphics programs"
#~ msgstr "Program Grafik"

#~ msgid ""
#~ "As a review, DrakX will present a summary of various information it has\n"
#~ "about your system. Depending on your installed hardware, you may have "
#~ "some\n"
#~ "or all of the following entries:\n"
#~ "\n"
#~ " * \"Mouse\": check the current mouse configuration and click on the "
#~ "button\n"
#~ "to change it if necessary.\n"
#~ "\n"
#~ " * \"%s\": check the current keyboard map configuration and click on\n"
#~ "the button to change that if necessary.\n"
#~ "\n"
#~ " * \"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one.\n"
#~ "\n"
#~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
#~ "primary language you have chosen. But here, just as in your choice of a\n"
#~ "keyboard, you may not be in a country to which the chosen language\n"
#~ "corresponds. You may need to click on the \"Timezone\" button to\n"
#~ "configure the clock for the correct timezone.\n"
#~ "\n"
#~ " * \"Printer\": clicking on the \"No Printer\" button will open the "
#~ "printer\n"
#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
#~ "Guide'' for more information on how to setup a new printer. The "
#~ "interface\n"
#~ "presented there is similar to the one used during installation.\n"
#~ "\n"
#~ " * \"Bootloader\": if you wish to change your bootloader configuration,\n"
#~ "click that button. This should be reserved to advanced users.\n"
#~ "\n"
#~ " * \"Graphical Interface\": by default, DrakX configures your graphical\n"
#~ "interface in \"800x600\" resolution. If that does not suits you, click "
#~ "on\n"
#~ "the button to reconfigure your graphical interface.\n"
#~ "\n"
#~ " * \"Network\": If you want to configure your Internet or local network\n"
#~ "access now, you can by clicking on this button.\n"
#~ "\n"
#~ " * \"Sound card\": if a sound card is detected on your system, it is\n"
#~ "displayed here. If you notice the sound card displayed is not the one "
#~ "that\n"
#~ "is actually present on your system, you can click on the button and "
#~ "choose\n"
#~ "another driver.\n"
#~ "\n"
#~ " * \"TV card\": if a TV card is detected on your system, it is displayed\n"
#~ "here. If you have a TV card and it is not detected, click on the button "
#~ "to\n"
#~ "try to configure it manually.\n"
#~ "\n"
#~ " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
#~ "displayed here. You can click on the button to change the parameters\n"
#~ "associated with the card."
#~ msgstr ""
#~ "DrakX menyajikan aneka informasi mesin Anda. Tergantung hardware yg\n"
#~ "ada, Anda dapat - atau tidak, melihat entri berikut:\n"
#~ "\n"
#~ " * \"Mouse\": cek konfigurasi mouse, klik tombol utk mengubahnya bila "
#~ "perlu\n"
#~ "\n"
#~ " * \"Papanketik\": cek konfigurasi map papanketik, klik tombol utk "
#~ "mengubahnya\n"
#~ "bila perlu.\n"
#~ "\n"
#~ " * \"Negara\": negara saat ini. Jika tak berada di negara ini, pilih yg "
#~ "lain.\n"
#~ "\n"
#~ " * \"Zona waktu\": DrakX menerka zona waktu Anda dari bahasa yg Anda "
#~ "pilih.\n"
#~ "Tapi sekali lagi seperti pilihan papanketik, Anda mungkin tak berada di "
#~ "negri\n"
#~ "yang selaras dg bahasa terpilih. Jadi Anda mungkin perlu menekan tombol\n"
#~ "\"Zona waktu\" utk mengkonfigurasikan jam sesuai zona waktu tempat Anda.\n"
#~ "\n"
#~ " * \"Printer\": klik \"No Printer\" utk membuka konfigurator printer.\n"
#~ "\n"
#~ " * \"Bootloader\": jika Anda ingin mengganti konfigurasi bootloader, klik "
#~ "tombol\n"
#~ "tersebut. Ini diperuntukkan pengguna ahli.\n"
#~ "\n"
#~ " * \"Antarmuka Grafis\": Awalnya DrakX mengkonfigurasikan antarmuka "
#~ "grafis pada\n"
#~ "resolusi \"800x600\". Jika tak cocok, klik tombol utk "
#~ "mengonfigurasikannya lagi.\n"
#~ "\n"
#~ " * \"Jaringan\": Jika Anda ingin mengkonfigurasikan akses Internet atau "
#~ "jaringan\n"
#~ "lokal sekarang, klik tombol ini.\n"
#~ "\n"
#~ " * \"Kartu suara\": kartu suara terdeteksi di sistem Anda akan "
#~ "ditampilkan\n"
#~ "di sini. Jika tak cocok, klik tombol dan pilih driver lain.\n"
#~ "\n"
#~ " * \"Kartu TV\": kartu TV yg terdeteksi di sistem Anda akan ditampilkan "
#~ "di\n"
#~ "sini. Jika Anda punya kartu TV dan tak terdeteksi, klik tombol utk\n"
#~ "mengkonfigurasikannya.\n"
#~ "\n"
#~ " * \"Kartu ISDN\": kartu ISDN yg terdeteksi di sistem Anda akan "
#~ "ditampilkan\n"
#~ "di sini. Anda dapat meng-klik tombol utk mengubah parameternya."

#~ msgid ""
#~ "DrakX will first detect any IDE devices present in your computer. It "
#~ "will\n"
#~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card "
#~ "is\n"
#~ "found, DrakX will automatically install the appropriate driver.\n"
#~ "\n"
#~ "Because hardware detection is not foolproof, DrakX will ask you if you "
#~ "have\n"
#~ "a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI "
#~ "cards\n"
#~ "to choose from. Click \"No\" if you know that you have no SCSI hardware "
#~ "in\n"
#~ "your machine. If you're not sure, you can check the list of hardware\n"
#~ "detected in your machine by selecting \"See hardware info \" and "
#~ "clicking\n"
#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
#~ "->\" button to return to the SCSI interface question.\n"
#~ "\n"
#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
#~ "you\n"
#~ "want to configure options for it. You should allow DrakX to probe the\n"
#~ "hardware for the card-specific options which are needed to initialize "
#~ "the\n"
#~ "adapter. Most of the time, DrakX will get through this step without any\n"
#~ "issues.\n"
#~ "\n"
#~ "If DrakX is not able to probe for the options to automatically determine\n"
#~ "which parameters need to be passed to the hardware, you'll need to "
#~ "manually\n"
#~ "configure the driver."
#~ msgstr ""
#~ "DrakX sedang mendeteksi perangkat IDE komputer Anda, juga men-scan kartu\n"
#~ "SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan DrakX akan otomatis\n"
#~ "meng-instal driver yang sesuai.\n"
#~ "\n"
#~ "Karena perangkat keras kadang tak terdeteksi, DrakX akan bertanya apakah\n"
#~ "ada kartu SCSI PCI. Klik \"Ya\" jika Anda tahu ada kartu SCSI terinstal "
#~ "di\n"
#~ "mesin Anda. Akan disajikan daftar kartu SCSI utk dipilih. Klik \"Tidak\" "
#~ "jika\n"
#~ "tak ada hardware SCSI. Jika Anda tak yakin, periksa daftar perangkat "
#~ "keras\n"
#~ "yang terdeteksi di mesin Anda dg memilih \"Lihat info hardware\" lalu "
#~ "klik\n"
#~ "\"Lanjut ->\". Periksa daftar hardware lalu klik \"Lanjut ->\" utk "
#~ "kembali.\n"
#~ "\n"
#~ "Jika Anda harus menunjuk adaptor secara manual, DrakX akan bertanya "
#~ "apakah\n"
#~ "Anda ingin menunjuk opsi untuknya. Anda harus mengizinkan DrakX mem-"
#~ "probe\n"
#~ "hardware utk opsi spesifik-kartu yg diperlukan hardware utk inisiasi. "
#~ "Ini\n"
#~ "biasanya bekerja baik.\n"
#~ "\n"
#~ "Jika DrakX gagal mem-probe opsi yang harus diberikan, Anda perlu "
#~ "memberikan\n"
#~ "opsi ke driver secara manual."

#~ msgid ""
#~ "Now, it's time to select a printing system for your computer. Other OSs "
#~ "may\n"
#~ "offer you one, but Mandrake Linux offers two. Each of the printing "
#~ "systems\n"
#~ "is best for a particular type of configuration.\n"
#~ "\n"
#~ " * \"pdq\" -- which is an acronym for ``print, don't queue'', is the "
#~ "choice\n"
#~ "if you have a direct connection to your printer, you want to be able to\n"
#~ "panic out of printer jams, and you do not have networked printers. "
#~ "(\"pdq\n"
#~ "\" will handle only very simple network cases and is somewhat slow when\n"
#~ "used with networks.) It's recommended that you use \"pdq \" if this is "
#~ "your\n"
#~ "first experience with GNU/Linux.\n"
#~ "\n"
#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
#~ "printing to your local printer or to one halfway around the planet. It "
#~ "is\n"
#~ "simple to configure and can act as a server or a client for the ancient\n"
#~ "\"lpd \" printing system, so it compatible with older operating systems\n"
#~ "that may still need print services. While quite powerful, the basic "
#~ "setup\n"
#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
#~ "make\n"
#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
#~ "front-ends for printing or choosing printer options and for managing the\n"
#~ "printer.\n"
#~ "\n"
#~ "If you make a choice now, and later find that you don't like your "
#~ "printing\n"
#~ "system you may change it by running PrinterDrake from the Mandrake "
#~ "Control\n"
#~ "Center and clicking the expert button."
#~ msgstr ""
#~ "Kini kita pilih sistem cetak komputer Anda. OS lain mungkin punya satu,\n"
#~ "Mandrake menyediakan dua.\n"
#~ "\n"
#~ " * \"pdq\" - artinya ``Print, Djangan nQantri'', adalah pilihan jika "
#~ "Anda\n"
#~ "punya koneksi langsung ke printer Anda dan ingin bebas dari panik "
#~ "kemacetan\n"
#~ "printer, serta tak punya printer jaringan. Ia akan meng-handle hanya "
#~ "kasus\n"
#~ "jaringan yg amat mudah dan agak lambat utk kerja jaringan. Ambil \"pdq\" "
#~ "jika\n"
#~ "ini kali pertama Anda mengenal GNU/Linux.\n"
#~ "\n"
#~ " * \"%s\" - ``Sistem Cetak Unix Umum'' canggih untuk mencetak ke printer\n"
#~ "lokal dan juga separuh planet. Mudah dan berfungsi spt server/klien utk\n"
#~ "sistem cetak kuno \"lpd\" jadi kompatibel dg sistem lama. Banyak trik "
#~ "dapat\n"
#~ "dilakukan, tapi setup awalnya hampir semudah \"pdq\". Jika Anda perlu "
#~ "ini\n"
#~ "utk emulasi server \"lpd\", Anda harus menyalakan daemon \"cups-lpd\".\n"
#~ "Front-end grafis disediakan utk pencetakan/pemilihan opsi printer.\n"
#~ "\n"
#~ "Jika nanti Anda tidak menyukai sistem cetak yg Anda pilih saat ini,\n"
#~ "jalankan PrinterDrake dari Pusat Kontrol Mandrake dan klik tombol Ahli."

#~ msgid ""
#~ "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
#~ "what it finds there:\n"
#~ "\n"
#~ " * if a Windows boot sector is found, it will replace it with a grub/"
#~ "LILO\n"
#~ "boot sector. This way you will be able to load either GNU/Linux or "
#~ "another\n"
#~ "OS.\n"
#~ "\n"
#~ " * if a grub or LILO boot sector is found, it will replace it with a new\n"
#~ "one.\n"
#~ "\n"
#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
#~ "bootloader.\n"
#~ "\n"
#~ "\"Boot device\": in most cases, you will not change the default (\"First\n"
#~ "sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
#~ "installed on the second hard drive (\"/dev/hdb\"), or even on a floppy "
#~ "disk\n"
#~ "(\"On Floppy\").\n"
#~ "\n"
#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
#~ "handy.\n"
#~ "\n"
#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
#~ "by\n"
#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
#~ ">>rescue<<\n"
#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
#~ "at\n"
#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
#~ "(MBR)\n"
#~ "of your main disk (unless you are using another boot manager), to allow "
#~ "you\n"
#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
#~ "on\n"
#~ "your system). If at some point you need to reinstall Windows, the "
#~ "Microsoft\n"
#~ "install process will rewrite the boot sector and remove your ability to\n"
#~ "start GNU/Linux!\n"
#~ "\n"
#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
#~ "disk,\n"
#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
#~ "a\n"
#~ "fair number of system tools for restoring a system that has crashed due "
#~ "to\n"
#~ "a power failure, an unfortunate typing error, a forgotten root password, "
#~ "or\n"
#~ "any other reason.\n"
#~ "\n"
#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
#~ "format the floppy and will rewrite the whole disk."
#~ msgstr ""
#~ "LILO dan grub adalah pemuat boot GNU/Linux. DrakX akan menganalisa "
#~ "sektor\n"
#~ "boot disk dan bekerja menurut apa yg ditemukannya di sana:\n"
#~ "\n"
#~ " * jika ditemukan sektor boot Mindows, ia akan menggantinya dg sektor "
#~ "boot\n"
#~ "grub/LILO. Dg demikian Anda akan dapat memuat GNU/Linux atau OS lain.\n"
#~ "\n"
#~ " * jika ditemukan sektor boot grub/LILO, ia akan menggantinya dg yg "
#~ "baru.\n"
#~ "\n"
#~ "Jika DrakX tak dapat mengambil keputusan, ia akan menanyakan tempat "
#~ "menaruh\n"
#~ "bootloader.\n"
#~ "\n"
#~ "\"Device boot\": Umumnya Anda tak perlu mengubah aslinya (\"sektor "
#~ "pertama\n"
#~ "(MBR)\"), tapi jika ingin, pemuat boot dapat ditaruh di harddisk kedua\n"
#~ "(\"/dev/hdb\"), atau bahkan disket (\"Di Disket\").\n"
#~ "\n"
#~ "Tandailah \"Buat disk boot\" utk membuat media boot darurat.\n"
#~ "\n"
#~ "CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg\n"
#~ "mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi "
#~ "jika\n"
#~ "komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini "
#~ "untuk\n"
#~ "pertolongan dalam setidaknya 2 situasi:\n"
#~ "\n"
#~ " * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)\n"
#~ "disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga "
#~ "Anda\n"
#~ "dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di "
#~ "sistem\n"
#~ "Anda). Jika Anda menginstal Mindows lagi, proses instal microsoft akan\n"
#~ "menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!\n"
#~ "\n"
#~ " * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari "
#~ "hard\n"
#~ "disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. "
#~ "Ini\n"
#~ "berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan "
#~ "power,\n"
#~ "salah ketik, alpa kata sandi, dan lain-lain.\n"
#~ "\n"
#~ "Jika \"Ya\", Anda akan diminta memasukkan disket ke drive. Disket\n"
#~ "harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat "
#~ "sebab\n"
#~ "DrakX akan menulis ulang seluruh disket."

#~ msgid ""
#~ "Your choice of preferred language will affect the language of the\n"
#~ "documentation, the installer and the system in general. Select first the\n"
#~ "region you are located in, and then the language you speak.\n"
#~ "\n"
#~ "Clicking on the \"%s\" button will allow you to select other\n"
#~ "languages to be installed on your workstation, thereby installing the\n"
#~ "language-specific files for system documentation and applications. For\n"
#~ "example, if you will host users from Spain on your machine, select "
#~ "English\n"
#~ "as the default language in the tree view and \"Espanol\" in the Advanced\n"
#~ "section.\n"
#~ "\n"
#~ "Note that you're not limited to choosing a single additional language. "
#~ "Once\n"
#~ "you have selected additional locales, click the \"%s\" button to\n"
#~ "continue.\n"
#~ "\n"
#~ "To switch between the various languages installed on the system, you can\n"
#~ "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
#~ "language used by the entire system. Running the command as a regular "
#~ "user\n"
#~ "will only change the language settings for that particular user."
#~ msgstr ""
#~ "Pilih bahasa utk dokumentasi, instalasi dan penggunaan sistem. Pilih "
#~ "daerah\n"
#~ "tempat Anda berada, lalu bahasa Anda.\n"
#~ "\n"
#~ "Klik \"Tambahan\" utk memilih bahasa-bahasa lain yg akan diinstal di\n"
#~ "workstation Anda. Hal ini akan menginstal file spesifik-bahasa "
#~ "dokumentasi\n"
#~ "sistem dan aplikasi. Misalnya jika Anda menginapkan pengguna dari "
#~ "Spanyol\n"
#~ "di mesin Anda, pilih bhs Indonesia sbg bahasa utama di tampilan pohon "
#~ "dan\n"
#~ "di bagian Tambahan pilih \"Spanyol\".\n"
#~ "\n"
#~ "Anda dapat menginstal banyak bahasa. Setelah Anda selesai memilih "
#~ "tambahan\n"
#~ "bahasa (locale) klik \"Lanjut ->\" untuk melanjutkan.\n"
#~ "\n"
#~ "Utk men-switch bahasa, sbg \"root\" luncurkan \"/usr/sbin/localedrake\" "
#~ "utk\n"
#~ "mengganti bahasa yg digunakan oleh keseluruhan sistem. Jika dijalankan\n"
#~ "sbg pengguna normal, bahasa yg diubah hanyalah bagi pengguna tersebut."

#~ msgid ""
#~ "\"%s\": check the current country selection. If you are not in this\n"
#~ "country, click on the button and choose another one."
#~ msgstr ""
#~ "\"Negara\": menandakan negara tempat Anda kini. Jika Anda tak berada di\n"
#~ "negara ini, klik tombol dan pilih yang lain."

#~ msgid ""
#~ "At this point, DrakX will allow you to choose the security level desired\n"
#~ "for the machine. As a rule of thumb, the security level should be set\n"
#~ "higher if the machine will contain crucial data, or if it will be a "
#~ "machine\n"
#~ "directly exposed to the Internet. The trade-off of a higher security "
#~ "level\n"
#~ "is generally obtained at the expense of ease of use. Refer to the \"msec"
#~ "\"\n"
#~ "chapter of the ``Command Line Manual'' to get more information about the\n"
#~ "meaning of these levels.\n"
#~ "\n"
#~ "If you do not know what to choose, keep the default option."
#~ msgstr ""
#~ "Kini waktunya memilih tingkat keamanan mesin. Makin terbuka suatu mesin,\n"
#~ "dan makin penting data di dalamnya, tingkat keamanannya harus makin "
#~ "tinggi.\n"
#~ "Tapi, level keamanan yang tinggi umumnya mengorbankan kemudahan "
#~ "pemakaian.\n"
#~ "Info ttg level keamanan dapat dilihat pada bab \"msec\" dalam\n"
#~ "``Manual Baris Perintah''.\n"
#~ "\n"
#~ "Jika Anda tak tahu apa yg dipilih, tetaplah pada opsi standar."

#~ msgid ""
#~ "At the time you are installing Mandrake Linux, it is likely that some\n"
#~ "packages have been updated since the initial release. Bugs may have been\n"
#~ "fixed, security issues resolved. To allow you to benefit from these\n"
#~ "updates, you are now able to download them from the Internet. Choose\n"
#~ "\"Yes\" if you have a working Internet connection, or \"No\" if you "
#~ "prefer\n"
#~ "to install updated packages later.\n"
#~ "\n"
#~ "Choosing \"Yes\" displays a list of places from which updates can be\n"
#~ "retrieved. Choose the one nearest you. A package-selection tree will\n"
#~ "appear: review the selection, and press \"Install\" to retrieve and "
#~ "install\n"
#~ "the selected package( s), or \"Cancel\" to abort."
#~ msgstr ""
#~ "Saat Mandrake Linux diinstal, nampaknya beberapa paket telah diupdate "
#~ "sejak\n"
#~ "rilis awal. Beberapa kesalahan mungkin telah diperbaiki / masalah "
#~ "keamanan\n"
#~ "dipecahkan. Untuk memanfaatkan update ini Anda dianjurkan men-download "
#~ "dari\n"
#~ "internet. Pilih \"Ya\" jika ada koneksi internet aktif, atau \"Tidak\" "
#~ "jika\n"
#~ "ingin mengupdate paket lain waktu.\n"
#~ "\n"
#~ "Jika \"Ya\", daftar sumber download update akan ditampilkan. Pilih yang\n"
#~ "dekat. Lalu muncul daftar paket: lihat lagi pilihan Anda, tekan\n"
#~ "\"Instal\" untuk mengambil/nstal paket atau \"Batal\" jika tak jadi."

#~ msgid ""
#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
#~ "ready to use. Just click \"%s\" to reboot the system. The first thing\n"
#~ "you should see after your computer has finished doing its hardware tests "
#~ "is\n"
#~ "the bootloader menu, giving you the choice of which operating system to\n"
#~ "start.\n"
#~ "\n"
#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
#~ "\n"
#~ " * \"generate auto-install floppy\": to create an installation floppy "
#~ "disk\n"
#~ "that will automatically perform a whole installation without the help of "
#~ "an\n"
#~ "operator, similar to the installation you just configured.\n"
#~ "\n"
#~ "   Note that two different options are available after clicking the "
#~ "button:\n"
#~ "\n"
#~ "    * \"Replay\". This is a partially automated installation. The\n"
#~ "partitioning step is the only interactive procedure.\n"
#~ "\n"
#~ "    * \"Automated\". Fully automated installation: the hard disk is\n"
#~ "completely rewritten, all data is lost.\n"
#~ "\n"
#~ "   This feature is very handy when installing a number of similar "
#~ "machines.\n"
#~ "See the Auto install section on our web site for more information.\n"
#~ "\n"
#~ " * \"Save packages selection\"(*): saves a list of the package selected "
#~ "in\n"
#~ "this installation. To use this selection with another installation, "
#~ "insert\n"
#~ "the floppy and start the installation. At the prompt, press the [F1] key\n"
#~ "and type >>linux defcfg=\"floppy\" <<.\n"
#~ "\n"
#~ "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
#~ "\"mformat a:\")"
#~ msgstr ""
#~ "Instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n"
#~ "\"Lanjut ->\" utk reboot. Yg akan Anda lihat pertama kali setelah tes "
#~ "hardware\n"
#~ "adalah menu bootloader; di sana Anda dapat memilih sistem operasi yg "
#~ "akan\n"
#~ "dijalankan.\n"
#~ "\n"
#~ "Tombol \"Tambahan\" (hanya di mode Ahli) menampilkan 2 tombol utk:\n"
#~ "\n"
#~ " * \"Membuat floppy instalasi otomatis\": utk membuat disket instalasi "
#~ "yang\n"
#~ "akan secara otomatis melakukan instalasi tanpa bantuan operator, sama dg\n"
#~ "instalasi yang baru Anda konfigurasikan.\n"
#~ "\n"
#~ "   Ada dua opsi setelah tombol di-klik:\n"
#~ "\n"
#~ "    * \"Ulang\". Instalasi semi-otomatis, hanya proses partisi yang "
#~ "tetap\n"
#~ "interaktif.\n"
#~ "\n"
#~ "    * \"Otomatis\". Instalasi otomatis penuh: harddisk ditulis ulang\n"
#~ "seluruhnya, semua data hilang.\n"
#~ "\n"
#~ "   Fitur ini amat praktis utk instalasi banyak mesin dg spesifikasi "
#~ "sama.\n"
#~ "Lihat pasal Auto install di website kami.\n"
#~ "\n"
#~ " * \"Simpan pilihan paket\"(*): simpan pilihan paket seperti yang dibuat\n"
#~ "sebelumnya. Lalu saat mengerjakan instalasi lain, masukkan floppy ke "
#~ "driver\n"
#~ "dan arahkan instalasi ke layar pertolongan dg menekan kunci [F1] lalu "
#~ "ketik\n"
#~ ">>linux defcfg=\"floppy\"<<.\n"
#~ "\n"
#~ "(*) Anda perlu floppy berformat FAT (utk membuatnya di GNU/Linux, "
#~ "jalankan\n"
#~ "\"mformat a:\")"

#~ msgid ""
#~ "At this point, you need to decide where you want to install the Mandrake\n"
#~ "Linux operating system on your hard drive. If your hard drive is empty "
#~ "or\n"
#~ "if an existing operating system is using all the available space you "
#~ "will\n"
#~ "have to partition the drive. Basically, partitioning a hard drive "
#~ "consists\n"
#~ "of logically dividing it to create the space needed to install your new\n"
#~ "Mandrake Linux system.\n"
#~ "\n"
#~ "Because the process of partitioning a hard drive is usually irreversible\n"
#~ "and can lead to lost data if there is an existing operating system "
#~ "already\n"
#~ "installed on the drive, partitioning can be intimidating and stressful "
#~ "if\n"
#~ "you are an inexperienced user. Fortunately, DrakX includes a wizard "
#~ "which\n"
#~ "simplifies this process. Before continuing with this step, read through "
#~ "the\n"
#~ "rest of this section and above all, take your time.\n"
#~ "\n"
#~ "Depending on your hard drive configuration, several options are "
#~ "available:\n"
#~ "\n"
#~ " * \"Use free space\": this option will perform an automatic "
#~ "partitioning\n"
#~ "of your blank drive(s). If you use this option there will be no further\n"
#~ "prompts.\n"
#~ "\n"
#~ " * \"Use existing partition\": the wizard has detected one or more "
#~ "existing\n"
#~ "Linux partitions on your hard drive. If you want to use them, choose "
#~ "this\n"
#~ "option. You will then be asked to choose the mount points associated "
#~ "with\n"
#~ "each of the partitions. The legacy mount points are selected by default,\n"
#~ "and for the most part it's a good idea to keep them.\n"
#~ "\n"
#~ " * \"Use the free space on the Windows partition\": if Microsoft Windows "
#~ "is\n"
#~ "installed on your hard drive and takes all the space available on it, "
#~ "you\n"
#~ "have to create free space for Linux data. To do so, you can delete your\n"
#~ "Microsoft Windows partition and data (see `` Erase entire disk'' "
#~ "solution)\n"
#~ "or resize your Microsoft Windows FAT partition. Resizing can be "
#~ "performed\n"
#~ "without the loss of any data, provided you previously defragment the\n"
#~ "Windows partition and that it uses the FAT format. Backing up your data "
#~ "is\n"
#~ "strongly recommended.. Using this option is recommended if you want to "
#~ "use\n"
#~ "both Mandrake Linux and Microsoft Windows on the same computer.\n"
#~ "\n"
#~ "   Before choosing this option, please understand that after this\n"
#~ "procedure, the size of your Microsoft Windows partition will be smaller\n"
#~ "then when you started. You will have less free space under Microsoft\n"
#~ "Windows to store your data or to install new software.\n"
#~ "\n"
#~ " * \"Erase entire disk\": if you want to delete all data and all "
#~ "partitions\n"
#~ "present on your hard drive and replace them with your new Mandrake Linux\n"
#~ "system, choose this option. Be careful, because you will not be able to\n"
#~ "undo your choice after you confirm.\n"
#~ "\n"
#~ "   !! If you choose this option, all data on your disk will be "
#~ "deleted. !!\n"
#~ "\n"
#~ " * \"Remove Windows\": this will simply erase everything on the drive "
#~ "and\n"
#~ "begin fresh, partitioning everything from scratch. All data on your disk\n"
#~ "will be lost.\n"
#~ "\n"
#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
#~ "\n"
#~ " * \"Custom disk partitionning\": choose this option if you want to\n"
#~ "manually partition your hard drive. Be careful -- it is a powerful but\n"
#~ "dangerous choice and you can very easily lose all your data. That's why\n"
#~ "this option is really only recommended if you have done something like "
#~ "this\n"
#~ "before and have some experience. For more instructions on how to use the\n"
#~ "DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n"
#~ "the ``Starter Guide''."
#~ msgstr ""
#~ "Pada tahap ini, pilihlah tempat Mandrake Linux akan diinstal di "
#~ "harddisk.\n"
#~ "Jika harddisk masih kosong / ada sistem operasi lain yg mengisi "
#~ "seluruhnya,\n"
#~ "Anda perlu melakukan proses partisi. Pada dasarnya, proses partisi "
#~ "harddisk\n"
#~ "adalah membagi harddisk, dg membuat ruang kosong utk instalasi sistem\n"
#~ "Mandrake Linux.\n"
#~ "\n"
#~ "Karena bersifat satu arah (tak dapat dikembalikan ke keadaan awal), "
#~ "proses\n"
#~ "partisi dapat membuat stres dan pusing kepala, apalagi jika Anda belum\n"
#~ "berpengalaman. Untungnya, DrakX mempermudah proses ini.\n"
#~ "Sebelum mulai, baca dan pelajari dulu buku manual dengan baik.\n"
#~ "\n"
#~ "Ada bbrp opsi tergantung konfigurasi harddisk Anda:\n"
#~ "\n"
#~ " * \"Pakai ruang kosong\": opsi ini akan secara otomatis mem-partisi "
#~ "drive\n"
#~ "kosong Anda. Anda takkan ditanya lebih jauh.\n"
#~ "\n"
#~ " * \"Pakai partisi yang sudah ada\": akan dideteksi satu/lebih partisi\n"
#~ "Linux di hard drive Anda. Jika Anda ingin menggunakannya, pilih opsi "
#~ "ini.\n"
#~ "\n"
#~ " * \"Pakai ruang kosong pada partisi Mindows\": jika wicrosoft mindows\n"
#~ "terinstal dan menghabiskan seluruh kapasitas disk, Anda perlu membuat "
#~ "ruang\n"
#~ "kosong untuk data Linux dg menghapus partisi dan data wicrosoft mindows\n"
#~ "(lihat solusi \"Hapus seluruh disk\" atau mode \"Ahli\") atau dapat juga\n"
#~ "mengubah ukuran partisi wicrosoft mindows. Cara ini dapat digunakan "
#~ "tanpa\n"
#~ "harus kehilangan data. Cara ini disarankan bila Anda ingin memakai Linux\n"
#~ "Mandrake dan wicrosoft mindows dlm satu komputer.\n"
#~ "\n"
#~ "   Sebelum memilih cara ini, mohon maklum bahwa partisi wicrosoft "
#~ "mindows\n"
#~ "sekarang berukuran lebih kecil. Ruang dlm wicrosoft mindows utk "
#~ "menyimpan\n"
#~ "data / menginstal software baru menjadi kecil.\n"
#~ "\n"
#~ " * \"Hapus seluruh disk\": jika Anda ingin hapus semua data dan partisi "
#~ "di\n"
#~ "harddisk Anda utk kemudian digantikan semuanya oleh sistem Mandrake "
#~ "Linux,\n"
#~ "pilih opsi ini. Hati-hati, Anda tak dapat kembali setelah konfirmasi.\n"
#~ "\n"
#~ "   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
#~ "\n"
#~ " * \"Buang Mindows\": ini akan menghapus semua di drive dan mulai proses\n"
#~ "partisi dari nol. Semua data di disk akan hilang.\n"
#~ "\n"
#~ "   !! Jika Anda pilih opsi ini semua data di disk Anda akan hilang. !!\n"
#~ "\n"
#~ " * \"Partisi manual\": pilih jika Anda ingin secara manual mempartisi "
#~ "harddisk.\n"
#~ "Awas! Cara ini amat perkasa tapi juga berbahaya. Anda bisa kehilangan "
#~ "data\n"
#~ "dg mudah. Instruksi penggunaan DiskDrake dapat dilihat di bagian\n"
#~ "``Pengaturan Partisi'' dalam ``Pedoman Pemula''."

#~ msgid ""
#~ "Checking \"Create a boot disk\" allows you to have a rescue boot media\n"
#~ "handy.\n"
#~ "\n"
#~ "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it "
#~ "by\n"
#~ "booting the CD-ROM, pressing the >> F1<< key at boot and typing "
#~ ">>rescue<<\n"
#~ "at the prompt. If your computer cannot boot from the CD-ROM, there are "
#~ "at\n"
#~ "least two situations where having a boot floppy is critical:\n"
#~ "\n"
#~ " * when installing the bootloader, DrakX will rewrite the boot sector "
#~ "(MBR)\n"
#~ "of your main disk (unless you are using another boot manager), to allow "
#~ "you\n"
#~ "to start up with either Windows or GNU/Linux (assuming you have Windows "
#~ "on\n"
#~ "your system). If at some point you need to reinstall Windows, the "
#~ "Microsoft\n"
#~ "install process will rewrite the boot sector and remove your ability to\n"
#~ "start GNU/Linux!\n"
#~ "\n"
#~ " * if a problem arises and you cannot start GNU/Linux from the hard "
#~ "disk,\n"
#~ "this floppy will be the only means of starting up GNU/Linux. It contains "
#~ "a\n"
#~ "fair number of system tools for restoring a system that has crashed due "
#~ "to\n"
#~ "a power failure, an unfortunate typing error, a forgotten root password, "
#~ "or\n"
#~ "any other reason.\n"
#~ "\n"
#~ "If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
#~ "floppy disk must be blank or have non-critical data on it - DrakX will\n"
#~ "format the floppy and will rewrite the whole disk."
#~ msgstr ""
#~ "Media boot darurat akan dibuat jika \"Buat disk boot\" ditandai.\n"
#~ "\n"
#~ "CDROM Mandrake Linux punya mode pertolongan built-in, yg bisa diakses dg\n"
#~ "mem-boot dari CDROM, tekan >>F1<< dan ketik >>rescue<< di prompt. Tapi "
#~ "jika\n"
#~ "komputer Anda tak dapat mem-boot dari CDROM, kembalilah ke tahap ini "
#~ "untuk\n"
#~ "pertolongan dalam setidaknya 2 situasi:\n"
#~ "\n"
#~ " * saat instalasi bootloader, DrakX akan menulis ulang sektor boot (MBR)\n"
#~ "disk utama Anda (kecuali jika Anda memakai manajer boot lain) sehingga "
#~ "Anda\n"
#~ "dapat menjalankan GNU/Linux atau Mindows (jika Anda punya Mindows di "
#~ "sistem\n"
#~ "Anda). Jika Anda menginstal Mindows lagi, proses instal microsoft akan\n"
#~ "menulis ulang sektor boot, dan Anda takkan dapat menjalankan GNU/Linux!\n"
#~ "\n"
#~ " * jika ada masalah sehingga Anda tak dapat menjalankan GNU/Linux dari "
#~ "hard\n"
#~ "disk, disket ini adalah jalan satu-satunya utk menjalankan GNU/Linux. "
#~ "Ini\n"
#~ "berisi sejumlah alat utk mereparasi sistem yg rusak karena kegagalan "
#~ "power,\n"
#~ "salah ketik, alpa kata sandi, dan lain-lain.\n"
#~ "\n"
#~ "Jika \"Ya\", Anda akan diminta memasukkan disket ke drive. Disket\n"
#~ "harus kosong / berisi data yg tak Anda perlukan. Tak perlu diformat "
#~ "sebab\n"
#~ "DrakX akan menulis ulang seluruh disket."

#~ msgid ""
#~ "This step is used to choose which services you wish to start at boot "
#~ "time.\n"
#~ "\n"
#~ "DrakX will list all the services available on the current installation.\n"
#~ "Review each one carefully and uncheck those which are not always needed "
#~ "at\n"
#~ "boot time.\n"
#~ "\n"
#~ "A short explanatory text will be displayed about a service when it is\n"
#~ "selected. However, if you are not sure whether a service is useful or "
#~ "not,\n"
#~ "it is safer to leave the default behavior.\n"
#~ "\n"
#~ "!! At this stage, be very careful if you intend to use your machine as a\n"
#~ "server: you will probably not want to start any services that you do not\n"
#~ "need. Please remember that several services can be dangerous if they are\n"
#~ "enabled on a server. In general, select only the services you really "
#~ "need.\n"
#~ "!!"
#~ msgstr ""
#~ "Tahap ini digunakan utk memilih servis yang dijalankan saat boot.\n"
#~ "\n"
#~ "Di sini ditampilkan semua servis yg tersedia di instalasi ini. Periksa "
#~ "dg\n"
#~ "baik dan jangan tandai servis yg tak selalu diperlukan saat boot.\n"
#~ "\n"
#~ "Ada penjelasan singkat bila suatu servis dipilih. Tapi jika Anda tak "
#~ "yakin\n"
#~ "kegunaan servis tsb., lebih aman tak usah diusik.\n"
#~ "\n"
#~ "!! Hati-hati jika Anda bermaksud menjadikan mesin Anda sebuah server: "
#~ "Anda\n"
#~ "mungkin tak ingin menjalankan servis yg tak diperlukan. Ingat,\n"
#~ "bbrp servis bisa berbahaya jika dijalankan. Secara umum, pilihlah hanya\n"
#~ "servis yang benar-benar perlu. !!"

#~ msgid ""
#~ "\"Printer\": clicking on the \"No Printer\" button will open the printer\n"
#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
#~ "Guide'' for more information on how to setup a new printer. The "
#~ "interface\n"
#~ "presented there is similar to the one used during installation."
#~ msgstr ""
#~ "\"Printer\": jika tombol \"Tiada Printer\" alat konfigurasi printer akan\n"
#~ "dibuka. Lihatlah bab yg terkait dg ``Petunjuk Pemula'' utk info setup\n"
#~ "printer baru. Antarmuka yg ditunjukkan di sana sama dg yg digunakan "
#~ "selama\n"
#~ "instalasi."

#~ msgid ""
#~ "The classic bug sound tester is to run the following commands:\n"
#~ "\n"
#~ "\n"
#~ "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card "
#~ "use\n"
#~ "by default\n"
#~ "\n"
#~ "- \"grep snd-slot /etc/modules.conf\" will tell you what driver it\n"
#~ "currently uses\n"
#~ "\n"
#~ "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
#~ "loaded or not\n"
#~ "\n"
#~ "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" "
#~ "will\n"
#~ "tell you if sound and alsa services're configured to be run on\n"
#~ "initlevel 3\n"
#~ "\n"
#~ "- \"aumix -q\" will tell you if the sound volume is muted or not\n"
#~ "\n"
#~ "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound "
#~ "card.\n"
#~ msgstr ""
#~ "Tester suara klasik akan menjalankan perintah berikut:\n"
#~ "\n"
#~ "\n"
#~ "- \"lspcidrake -v | fgrep AUDIO\" akan memberitahu Anda driver mana yg\n"
#~ "dipakai oleh kartu Anda secara default\n"
#~ "\n"
#~ "- \"grep snd-slot /etc/modules.conf\" memberitahu driver apa yg dipakai\n"
#~ "sekarang\n"
#~ "\n"
#~ "- \"/sbin/lsmod\" mencek apakah modul (driver) ybs dimuat atau tidak\n"
#~ "\n"
#~ "- \"/sbin/chkconfig --list sound\" dan \"/sbin/chkconfig --list alsa\" "
#~ "akan\n"
#~ "memberitahu Anda apakah servis suara dan alsa terkonfigurasi utk "
#~ "dijalankan\n"
#~ "pada initlevel 3\n"
#~ "\n"
#~ "- \"aumix -q\" memberitahu apakah volume suara dipadamkan atau tidak\n"
#~ "\n"
#~ "- \"/sbin/fuser -v /dev/dsp\" akan memberitahu program mana yg memakai\n"
#~ "kartu suara.\n"

#~ msgid ""
#~ "Please enter your host name if you know it.\n"
#~ "Some DHCP servers require the hostname to work.\n"
#~ "Your host name should be a fully-qualified host name,\n"
#~ "such as ``mybox.mylab.myco.com''."
#~ msgstr ""
#~ "Masukkan hostname sebab ada server DHCP yg mengharuskan adanya hostname.\n"
#~ "Hostname (nama komputer) sebaiknya merupakan nama host yg fully-"
#~ "qualified\n"
#~ "misalnya ``mesinku.labku.kotaku.com''."

#~ msgid "no network card found"
#~ msgstr "kartu jaringan tak ditemukan"

#~ msgid "Printer sharing"
#~ msgstr "Sharing printer"

#~ msgid ""
#~ "The following printers are configured. Double-click on a printer to "
#~ "change its settings; to make it the default printer; to view information "
#~ "about it; or to make a printer on a remote CUPS server available for Star "
#~ "Office/OpenOffice.org/GIMP."
#~ msgstr ""
#~ "Printer berikut telah dikonfigurasikan. Klik-dobel printer utk "
#~ "memodifikasi setting; membuatnya printer default; atau melihat info "
#~ "tentangnya; atau membuat printer di server CUPS remote dapat dipakai oleh "
#~ "Star Office/OpenOffice.org/GIMP."

#~ msgid ""
#~ "To know about the options available for the current printer read either "
#~ "the list shown below or click on the \"Print option list\" button.%s%s\n"
#~ "\n"
#~ msgstr ""
#~ "Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol "
#~ "\"Daftar opsi cetak\".%s%s\n"
#~ "\n"

#~ msgid ""
#~ "Your printer belongs to the group of GDI laser printers (winprinters) "
#~ "sold by different manufacturers which uses the Zenographics ZJ-stream "
#~ "raster format for the data sent to the printer. The driver for these "
#~ "printers is still in a very early development stage and so it will "
#~ "perhaps not always work properly. Especially it is possible that the "
#~ "printer only works when you choose the A4 paper size.\n"
#~ "\n"
#~ "Some of these printers, as the HP LaserJet 1000, for which this driver "
#~ "was originally created, need their firmware to be uploaded to them after "
#~ "they are turned on. In the case of the HP LaserJet 1000 you have to "
#~ "search the printer's Windows driver CD or your Windows partition for the "
#~ "file \"sihp1000.img\" and upload the file to the printer with one of the "
#~ "following commands:\n"
#~ "\n"
#~ "     lpr -o raw sihp1000.img\n"
#~ "     cat sihp1000.img > /dev/usb/lp0\n"
#~ "\n"
#~ "The first command can be given by any normal user, the second must be "
#~ "given as root. After having done so you can print normally.\n"
#~ msgstr ""
#~ "Printer Anda termasuk kelompok printer laser GDI (winprinter) yg "
#~ "menggunakan format raster Zenographics ZJ-stream utk data yg dikirim ke "
#~ "printer. Driver printer ini masih amat prematur dan mungkin tak selalu "
#~ "bekerja dg benar. Khususnya printer mungkin hanya bekerja jika Anda "
#~ "memilih kertas ukuran A4.\n"
#~ "\n"
#~ "Beberapa printer misalnya HP LaserJet 1000 (driver ini semula dibuat "
#~ "untuknya), mensyaratkan firmware di-upload setelah dinyalakan. Untuk HP "
#~ "LaserJet 1000, carilah file \"sihp1000.img\" di CD driver Mindows printer "
#~ "atau partisi Mindows Anda dan upload file ke printer dg perintah "
#~ "berikut:\n"
#~ "\n"
#~ "     lpr -o raw sihp1000.img\n"
#~ "     cat sihp1000.img > /dev/usb/lp0\n"
#~ "\n"
#~ "Perintah pertama dapat diberikan oleh pengguna normal, yang kedua harus "
#~ "dikerjakan oleh root. Setelah itu Anda baru dapat mencetak.\n"

#~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
#~ msgstr "Printer Laser GDI dengan Format ZJ-Stream Zenographics"

#~ msgid "CUPS printer sharing configuration"
#~ msgstr "Konfigurasi sharing printer CUPS"

#~ msgid ""
#~ "The success of MandrakeSoft is based upon the principle of Free Software. "
#~ "Your new operating system is the result of collaborative work on the part "
#~ "of the worldwide Linux Community"
#~ msgstr ""
#~ "Sukses MandrakeSoft berdasar prinsip Perangkat Lunak Bebas. OS baru Anda "
#~ "adalah hasil kerja kolaborasi Komunitas Linux seluruh dunia"

#~ msgid "Welcome to the Open Source world"
#~ msgstr "Selamat datang di dunia Source Terbuka"

#~ msgid ""
#~ "To share your own knowledge and help build Linux tools, join the "
#~ "discussion forums you'll find on our \"Community\" webpages"
#~ msgstr ""
#~ "Untuk berbagi pengetahuan dan membantu membangun peralatan Linux, mari "
#~ "bergabung dalam forum diskusi yg tertera di halaman web \"Komunitas\" kami"

#~ msgid "Want to know more about the Open Source community?"
#~ msgstr "Ingin tahu lebih tentang komunitas Open Source?"

#~ msgid "Get involved in the Free Software world"
#~ msgstr "Gabung dunia Perangkat Lunak Bebas"

#~ msgid ""
#~ "Mandrake Linux 9.2 has selected the best software for you. Surf the Web "
#~ "and view animations with Mozilla and Konqueror, or read your mail and "
#~ "handle your personal information with Evolution and Kmail"
#~ msgstr ""
#~ "Mandrake Linux 9.2 menyajikan software terbaik. Jelajah web dan lihat "
#~ "animasi dengan Mozilla dan Konqueror, atau baca email dan atur info "
#~ "pribadi Anda dengan Evolution dan Kmail"

#~ msgid "Get the most from the Internet"
#~ msgstr "Ambil yang paling Wah! dari Internet"

#~ msgid ""
#~ "Mandrake Linux 9.2 enables you to use the very latest software to play "
#~ "audio files, edit and handle your images or photos, and play videos"
#~ msgstr ""
#~ "Mandrake Linux 9.2 memungkinkan Anda menggunakan software mutakhir untuk "
#~ "memainkan file audio, edit dan mengatur gambar/foto, dan melihat video"

#~ msgid "Push multimedia to its limits!"
#~ msgstr "Dorong multimedia hingga tapal batas!"

#~ msgid "Discover the most up-to-date graphical and multimedia tools!"
#~ msgstr "Temukan perlengkapan grafis dan multimedia terbaru!"

#~ msgid ""
#~ "Mandrake Linux 9.2 provides the best Open Source games - arcade, action, "
#~ "strategy, ..."
#~ msgstr ""
#~ "Mandrake Linux menyediakan game Open Source terbaik - arcade, aksi, "
#~ "kartu, olah raga, strategi, ..."

#~ msgid "Games"
#~ msgstr "Game"

#~ msgid ""
#~ "Mandrake Linux 9.2 provides a powerful tool to fully customize and "
#~ "configure your machine"
#~ msgstr ""
#~ "Mandrake Linux menyediakan alat perkasa untuk mengkonfigurasi mesin Anda"

#~ msgid ""
#~ "Mandrake Linux 9.2 provides you with 11 user interfaces that can be fully "
#~ "modified: KDE 3, Gnome 2, WindowMaker, ..."
#~ msgstr ""
#~ "Mandrake Linux menyediakan 11 antarmuka pengguna yang dapat dimodifikasi: "
#~ "KDE 3, Gnome 2, WindowMaker, ..."

#~ msgid "User interfaces"
#~ msgstr "Antarmuka pengguna"

#~ msgid ""
#~ "Use the full power of the GNU gcc 3 compiler as well as the best Open "
#~ "Source development environments"
#~ msgstr ""
#~ "Gunakan power compiler gcc GNU, juga lingkungan bangun Open Source terbaik"

#~ msgid "Mandrake Linux 9.2 is the ultimate development platform"
#~ msgstr "Mandrake Linux adalah platform bangun terampuh"

#~ msgid "Development simplified"
#~ msgstr "Pengembangan dipermudah"

#~ msgid ""
#~ "Transform your machine into a powerful Linux server with a few clicks of "
#~ "your mouse: Web server, mail, firewall, router, file and print server, ..."
#~ msgstr ""
#~ "Jadikan mesin Anda server perkasa dengan hanya beberapa klik mouse: "
#~ "server Web, email, firewall, router, server file dan cetak, ..."

#~ msgid "Turn your machine into a reliable server"
#~ msgstr "Jadikan mesin Anda server yang handal"

#~ msgid "This product is available on MandrakeStore website"
#~ msgstr "Produk ini tersedia di situs MandrakeStore"

#~ msgid ""
#~ "This firewall product includes network features that allow you to fulfill "
#~ "all your security needs"
#~ msgstr ""
#~ "Produk firewall ini mencakup fitur jaringan yang memungkinkan Anda "
#~ "memenuhi semua kebutuhan sekuritas"

#~ msgid ""
#~ "The MandrakeSecurity range includes the Multi Network Firewall product (M."
#~ "N.F.)"
#~ msgstr "MandrakeSecurity mencakup produk Multi Network Firewall (M.N.F.)"

#~ msgid "Optimize your security"
#~ msgstr "Optimasi keamanan"

#~ msgid ""
#~ "Our full range of Linux solutions, as well as special offers on products "
#~ "and other \"goodies,\" are available online on our e-store:"
#~ msgstr ""
#~ "Solusi Linux lengkap, termasuk sajian khusus produk dan \"goodies\" lain, "
#~ "tersedia online di e-store kami:"

#~ msgid "The official MandrakeSoft store"
#~ msgstr "Toko resmi MandrakeSoft"

#~ msgid ""
#~ "MandrakeSoft works alongside a selection of companies offering "
#~ "professional solutions compatible with Mandrake Linux. A list of these "
#~ "partners is available on the MandrakeStore"
#~ msgstr ""
#~ "MandrakeSoft bekerjasama dengan sejumlah perusahaan penyedia solusi "
#~ "profesional yang kompatibel dengan Mandrake Linux. Daftar mitra ada di "
#~ "MandrakeStore"

#~ msgid "Strategic partners"
#~ msgstr "Mitra strategis"

#~ msgid ""
#~ "Whether you choose to teach yourself online or via our network of "
#~ "training partners, the Linux-Campus catalogue prepares you for the "
#~ "acknowledged LPI certification program (worldwide professional technical "
#~ "certification)"
#~ msgstr ""
#~ "Apakah Anda memilih belajar sendiri atau via jaringan mitra training "
#~ "kami, katalog Kampus-Linux mempersiapkan Anda untuk program sertifikasi "
#~ "LPI baku (sertifikat teknik profesional dunia)"

#~ msgid "Certify yourself on Linux"
#~ msgstr "Sertifikasikan diri Anda di Linux"

#~ msgid ""
#~ "The training program has been created to respond to the needs of both end "
#~ "users and experts (Network and System administrators)"
#~ msgstr ""
#~ "Program training diadakan untuk memenuhi kebutuhan para pengguna akhir "
#~ "dan pakar (admin jaringan dan sistem)"

#~ msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
#~ msgstr "Temukan katalog training MandrakeSoft Kampus-Linux"

#~ msgid ""
#~ "Find the solutions of your problems via MandrakeSoft's online support "
#~ "platform"
#~ msgstr "Temukan solusi problem via platform dukungan online MandrakeSoft"

#~ msgid "An online platform to respond to company's specific support needs"
#~ msgstr "Platform online yang melayani kebutuhan support spesifik perusahaan"

#~ msgid ""
#~ "MandrakeClub and Mandrake Corporate Club were created for business and "
#~ "private users of Mandrake Linux who would like to directly support their "
#~ "favorite Linux distribution while also receiving special privileges. If "
#~ "you enjoy our products, if your company benefits from our products to "
#~ "gain a competititve edge, if you want to support Mandrake Linux "
#~ "development, join MandrakeClub!"
#~ msgstr ""
#~ "MandrakeClub dan Klub Perusahaan Mandrake dibuat utk pengguna pribadi dan "
#~ "bisnis Mandrake Linux yg ingin secara langsung men-support distro Linux "
#~ "favorit sembari menerima hak-hak khusus. Jika Anda suka produk kami, jika "
#~ "produk kami membantu perusahaan Anda dalam bersaing, jika Anda ingin "
#~ "membantu pembangunan Mandrake Linux, bergabunglah dengan MandrakeClub!"

#~ msgid "Discover MandrakeClub and Mandrake Corporate Club"
#~ msgstr "KlubMandrake dan Klub Perusahaan Mandrake"

#~ msgid "DrakFloppy Error: %s"
#~ msgstr "Error DrakFloppy: %s"

#~ msgid ""
#~ "You are about to configure your computer to install a PXE server as a "
#~ "DHCP server\n"
#~ "and a TFTP server to build an installation server.\n"
#~ "With that feature, other computers on your local network will be "
#~ "installable using from this computer.\n"
#~ "\n"
#~ "Make sure you have configured your Network/Internet access using "
#~ "drakconnect before going any further.\n"
#~ "\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN)."
#~ msgstr ""
#~ "Anda sedang akan melakukan instalasi server PXE sbg server DHCP dan "
#~ "server\n"
#~ "TFTP utk membangun server instalasi. Dengan fitur tsb, komputer lain di\n"
#~ "jaringan lokal akan dapat diinstal menggunakan komputer ini.\n"
#~ "Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg\n"
#~ "drakconnect sebelum pergi lebih jauh.\n"
#~ "\n"
#~ "Catatan: Anda mesti punya Adaptor Jaringan untuk mensetup Jaringan Area\n"
#~ "Lokal (LAN)."

#~ msgid ""
#~ "The cpu frequency in Mhz (Mega herz which in first approximation may be "
#~ "coarsely assimilated to number of instructions the cpu is able to execute "
#~ "per second)"
#~ msgstr ""
#~ "Frekuensi cpu dlm Mhz (jumlah instruksi perdetik yg dapat dieksekusi oleh "
#~ "cpu)"

#~ msgid "Office"
#~ msgstr "Aplikasi Perkantoran"

#~ msgid "Set of tools for mail, news, web, file transfer, and chat"
#~ msgstr "Kumpulan tool untuk mail, news, web, transfer file, dan chat"

#~ msgid "Multimedia - Graphics"
#~ msgstr "Multimedia - Grafis"

#~ msgid "Graphics programs such as The Gimp"
#~ msgstr "Program Grafis, misalnya The Gimp"

#~ msgid "Multimedia - Sound"
#~ msgstr "Multimedia - Suara"

#~ msgid "Audio-related tools: mp3 or midi players, mixers, etc"
#~ msgstr "Tool untuk audio: player mp3 atau midi, mixer, dsb"

#~ msgid "Multimedia - Video"
#~ msgstr "Multimedia - Video"

#~ msgid "Video players and editors"
#~ msgstr "Editor dan Player Video"

#~ msgid "Multimedia - CD Burning"
#~ msgstr "Multimedia - Bakar CD"

#~ msgid "Tools to create and burn CD's"
#~ msgstr "Tool untuk membuat dan memburn CD"

#~ msgid "More Graphical Desktops (Gnome, IceWM)"
#~ msgstr "Desktop Grafis tambahan (Gnome, IceWM)"

#~ msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
#~ msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, dsb"

#~ msgid "Personal Information Management"
#~ msgstr "Pengelolaan Informasi Pribadi"

#~ msgid "Tools for your Palm Pilot or your Visor"
#~ msgstr "Tool untuk Palm Pilot ataupun Visor"

#~ msgid "Personal Finance"
#~ msgstr "Keuangan Pribadi"

#~ msgid "Programs to manage your finances, such as gnucash"
#~ msgstr "Program untuk mengelola keuangan, misalnya gnucash"