# Instalator Grafis Mandrake # Copyright (C) 1999 Mandrakesoft # Budi Rachmanto , 2001-2003 # Linux Indonesia , 1999-2001 # Mohammad DAMT , 1999-2001 # Andy , 1999 # Kelana , 1999 # Bayu Artanto , 2005. # Willy Sudiarto Raharjo , 2005 # msgid "" msgstr "" "Project-Id-Version: DrakX 0.1\n" "POT-Creation-Date: 2005-02-24 14:10+0100\n" "PO-Revision-Date: 2005-03-19 16:27+0700\n" "Last-Translator: bayu artanto \n" "Language-Team: Indonesia \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.6\n" #: ../move/move.pm:292 #, c-format msgid "Which USB key do you want to format?" msgstr "USB mana yang ingin di format?" #: ../move/move.pm:296 #, c-format msgid "" "You are about to format a USB device \"%s\". This will delete all data on " "it.\n" "Make sure that the selected device is the USB key you want to format. \n" "We advise you to unplug all other USB storage devices while doing this " "operation." msgstr "" "Anda akan memformat divais USB \"%s\". Ini akan menghapus semua data " "didalamnya.\n" "Pastikan divais USB ini yang akan diformat.\n" "Kami menyarankan Anda untuk melepas divais USB lainnya selama proses ini " "berlangsung." #: ../move/move.pm:448 ../move/move.pm:460 #, c-format msgid "Key is not writable" msgstr "Kunci tidak dapat ditulisi" #: ../move/move.pm:450 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" "Tampaknya proteksi penulisan USB diaktifkan. Harap\n" "lepas USB, hilangkan proteksi di USB, kemudian pasang kembali." #: ../move/move.pm:452 #, c-format msgid "Retry" msgstr "Coba lagi" #: ../move/move.pm:453 ../move/move.pm:497 #, c-format msgid "Continue without USB key" msgstr "Teruskan tanpa USB" #: ../move/move.pm:462 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can not safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" "Tampaknya proteksi penulisan USB diaktifkan, tetapi USB tidak bisa dilepas " "dengan\n" "aman sekarang.\n" "\n" "\n" "Klik tombol reboot pada komputer, lepaskan USB, hilangkan proteksinya,\n" "pasang kembali USB, lalu jalankan Mandrake Move lagi." #: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317 #, c-format msgid "Reboot" msgstr "Boot Ulang" #: ../move/move.pm:473 #, c-format msgid "" "Your USB key does not have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "USB Anda tidak mempunyai partisi Windows (FAT). Diperlukan minimal\n" "satu partisi untuk melanjutkan (selain itu, partisi FAT lebih standar " "sehingga \n" "Anda bisa memindahkan dan mengakses file Anda dari komputer\n" "Windows). Silahkan pasang USB yang berisi partisi\n" "Windows didalamnya.\n" "\n" "\n" "Anda bisa melanjutkan proses tanpa USB - Anda akan tetap \n" "bisa menjalankan Mandrake Move seperti layaknya Sistem Operasi \n" "Mandrake." #: ../move/move.pm:483 #, c-format msgid "" "We did not detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" "Kami tidak mendeteksi adanya USB pada sistem Anda. Jika \n" "Anda memasang USB sekarang, Mandrake Move dapat \n" "menyimpan data secara tranparan ke direktori home dan\n" "konfigurasi umum sistem, untuk boot selanjutnya dikomputer ini\n" "atau komputer lain. Catatan:jika USB dipasang sekarang, tunggu beberapa\n" "detik sebelum mendeteksi lagi.\n" "\n" "\n" "Anda bisa melanjutkan proses tanpa USB - Anda akan tetap \n" "bisa menjalankan Mandrake Move seperti layaknya Sistem Operasi \n" "Mandrake." #: ../move/move.pm:494 #, c-format msgid "Need a key to save your data" msgstr "Membutuhkan USB untuk menyimpan data" #: ../move/move.pm:496 #, c-format msgid "Detect USB key again" msgstr "Mendeteksi USB lagi" #: ../move/move.pm:517 #, c-format msgid "Setting up USB key" msgstr "Setting USB" #: ../move/move.pm:517 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "" "Harap tunggu, sedang melakukan setting file konfigurasi sistem pada USB..." #: ../move/move.pm:546 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "Masukkan informasi user, katasandi akan digunakan untuk screensaver" #: ../move/move.pm:556 #, c-format msgid "Auto configuration" msgstr "Konfigurasi otomatis" #: ../move/move.pm:556 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Harap tunggu, sedang mendeteksi dan mengkonfigurasi divais...." #: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 #: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393 #: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541 #: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183 #: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82 #: install_steps_interactive.pm:38 interactive/http.pm:117 #: interactive/http.pm:118 network/netconnect.pm:1037 #: network/netconnect.pm:1041 network/netconnect.pm:1046 #: network/netconnect.pm:1072 network/netconnect.pm:1141 #: network/netconnect.pm:1145 network/netconnect.pm:1283 #: network/netconnect.pm:1288 network/netconnect.pm:1306 #: network/netconnect.pm:1491 printer/printerdrake.pm:238 #: printer/printerdrake.pm:245 printer/printerdrake.pm:270 #: printer/printerdrake.pm:416 printer/printerdrake.pm:421 #: printer/printerdrake.pm:434 printer/printerdrake.pm:444 #: printer/printerdrake.pm:508 printer/printerdrake.pm:635 #: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335 #: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416 #: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434 #: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605 #: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613 #: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719 #: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737 #: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852 #: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957 #: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984 #: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004 #: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159 #: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949 #: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501 #: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509 #: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205 #: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483 #: standalone/drakTermServ:392 standalone/drakTermServ:753 #: standalone/drakTermServ:760 standalone/drakTermServ:779 #: standalone/drakTermServ:998 standalone/drakTermServ:1478 #: standalone/drakTermServ:1483 standalone/drakTermServ:1490 #: standalone/drakTermServ:1502 standalone/drakTermServ:1523 #: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625 #: standalone/drakbackup:1127 standalone/drakbackup:1160 #: standalone/drakbackup:1671 standalone/drakbackup:1827 #: standalone/drakbackup:2421 standalone/drakbackup:4110 #: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124 #: standalone/drakconnect:649 standalone/drakconnect:652 #: standalone/drakconnect:671 standalone/drakfloppy:297 #: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209 #: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604 #: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107 #: standalone/finish-install:39 standalone/logdrake:169 #: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59 #: standalone/scannerdrake:202 standalone/scannerdrake:261 #: standalone/scannerdrake:715 standalone/scannerdrake:726 #: standalone/scannerdrake:865 standalone/scannerdrake:876 #: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Kesalahan" #: ../move/move.pm:605 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I do not know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Terjadi kesalahan, tetapi tidak diketahui cara mengatasinya dengan baik.\n" "Lanjutkan dengan resiko ditanggung sendiri." #: ../move/move.pm:660 install_steps_interactive.pm:38 #, c-format msgid "An error occurred" msgstr "Terjadi kesalahan" #: ../move/move.pm:666 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" "Terjadi kesalahan:\n" "\n" "\n" "%s\n" "\n" "Hal ini bisa datang dari file konfigurasi sistem pada USB \n" "yang terkorupsi, dalam kasus ini menghapus lalu mereboot \n" "Mandrake Move akan memperbaiki masalah. Untuk melakukannya\n" "klik tombol ini.\n" "\n" "\n" "Anda juga bisa mereboot dan melepas USB, atau\n" "melihat isinya pada sistem operasi lain, dan atau melihat\n" "file log pada konsol #3 dan #4 untuk mencoba\n" "melihat apa yang terjadi." #: ../move/move.pm:681 #, c-format msgid "Remove system config files" msgstr "Menghapus file konfigurasi sistem" #: ../move/move.pm:682 #, c-format msgid "Simply reboot" msgstr "Boot ulang" #: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96 #, c-format msgid "You can only run with no CDROM support" msgstr "Anda bisa menjalankan tanpa dukungan CDROM" #: ../move/tree/mdk_totem:71 #, c-format msgid "Kill those programs" msgstr "Kill program itu" #: ../move/tree/mdk_totem:72 #, c-format msgid "No CDROM support" msgstr "Tanpa dukungan CDROM" #: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 #: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030 #: diskdrake/interactive.pm:1083 #, c-format msgid "Read carefully!" msgstr "Baca dengan seksama!" #: ../move/tree/mdk_totem:77 #, c-format msgid "" "You can not use another CDROM when the following programs are running: \n" "%s" msgstr "" "Anda tidak bisa menggunakan CDROM ketika program berikut berjalan :\n" "%s " #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "Menyalin ke memori untuk mengijinkan pelepasan CDROM" #: Xconfig/card.pm:13 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:14 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:15 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:16 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:17 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:18 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:19 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:20 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:21 #, c-format msgid "64 MB or more" msgstr "64 MB atau lebih" #: Xconfig/card.pm:159 #, c-format msgid "X server" msgstr "Server X" #: Xconfig/card.pm:160 #, c-format msgid "Choose an X server" msgstr "Memilih server X" #: Xconfig/card.pm:192 #, c-format msgid "Multi-head configuration" msgstr "Konfigurasi multi-head" #: Xconfig/card.pm:193 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "Sistem Anda mendukung konfigurasi multiple head.\n" "Apa yang ingin Anda lakukan?" #: Xconfig/card.pm:262 #, c-format msgid "Can not install Xorg package: %s" msgstr "Tidak dapat menginstall paket Xorg: %s" #: Xconfig/card.pm:272 #, c-format msgid "Select the memory size of your graphics card" msgstr "Pilih ukuran memori kartu grafis Anda" #: Xconfig/card.pm:349 #, c-format msgid "Xorg configuration" msgstr "Konfigurasi Xorg" #: Xconfig/card.pm:351 #, c-format msgid "Which configuration of Xorg do you want to have?" msgstr "Konfigurasi Xorg mana yang Anda inginkan?" #: Xconfig/card.pm:384 #, c-format msgid "Configure all heads independently" msgstr "Konfigurasikan semua head secara terpisah" #: Xconfig/card.pm:385 #, c-format msgid "Use Xinerama extension" msgstr "Gunakan ekstensi Xinerama" #: Xconfig/card.pm:390 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Konfigurasikan hanya kartu \"%s\"%s" #: Xconfig/card.pm:402 Xconfig/various.pm:23 #, c-format msgid "Xorg %s" msgstr "Xorg %s" #: Xconfig/card.pm:409 Xconfig/various.pm:22 #, c-format msgid "Xorg %s with 3D hardware acceleration" msgstr "Xorg %s dengan akselerasi hardware 3D" #: Xconfig/card.pm:411 #, c-format msgid "Your card can have 3D hardware acceleration support with Xorg %s." msgstr "Kartu Anda dapat menggunakan akselerasi hardware 3D pada Xorg %s." #: Xconfig/card.pm:417 #, c-format msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration" msgstr "Xorg %s dengan akselerasi hardware 3D PERCOBAAN" #: Xconfig/card.pm:419 #, c-format msgid "" "Your card can have 3D hardware acceleration support with Xorg %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Kartu Anda dapat menggunakan akselerasi hardware 3D pada Xorg %s,\n" "PERHATIKAN, INI DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA HANG." #: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914 #, c-format msgid "Custom" msgstr "Kebiasaan" #: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 #: install_steps_interactive.pm:86 printer/printerdrake.pm:737 #: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742 #: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183 #: standalone/scannerdrake:477 #, c-format msgid "Quit" msgstr "Keluar" #: Xconfig/main.pm:117 #, c-format msgid "Graphic Card" msgstr "Kartu Grafik" #: Xconfig/main.pm:120 Xconfig/monitor.pm:111 #, c-format msgid "Monitor" msgstr "Monitor" #: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221 #, c-format msgid "Resolution" msgstr "Resolusi" #: Xconfig/main.pm:128 #, c-format msgid "Test" msgstr "Tes" #: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakfont:493 standalone/drakfont:555 #, c-format msgid "Options" msgstr "Opsi" #: Xconfig/main.pm:168 #, c-format msgid "Your Xorg configuration file is broken, we will ignore it." msgstr "File konfigurasi Xorg Anda rusak, akan diabaikan." #: Xconfig/main.pm:186 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Simpan perubahan?\n" "Konfigurasi sekarang adalah:\n" "\n" "%s" #: Xconfig/monitor.pm:112 #, c-format msgid "Choose a monitor for head #%d" msgstr "Pilih Monitor untuk head #%d" #: Xconfig/monitor.pm:112 #, c-format msgid "Choose a monitor" msgstr "Pilih monitor" #: Xconfig/monitor.pm:118 #, c-format msgid "Plug'n Play" msgstr "Plug'n Play" #: Xconfig/monitor.pm:119 mouse.pm:49 #, c-format msgid "Generic" msgstr "Generik" #: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52 #: standalone/harddrake2:86 #, c-format msgid "Vendor" msgstr "Pembuat" #: Xconfig/monitor.pm:130 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "Pendeteksian Plug'n Play gagal. Silahkan memilih monitor yang benar" #: Xconfig/monitor.pm:135 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Dua parameter penting adalah vertical refresh rate, yaitu \n" "kecepatan saat seluruh layar direfresh, dan yang lebih penting lagi adalah\n" "horisontal sync rate, yaitu kecepatan saat menanyangkan scan line.\n" "\n" "Ini SANGAT PENTING sehingga Anda jangan menentukan jenis monitor dengan " "jangkauan \n" "yang melebihi kemampuan monitor Anda: Anda bisa merusak monitor Anda.\n" "Jika ragu-ragu, gunakan setting yang umum." #: Xconfig/monitor.pm:142 #, c-format msgid "Horizontal refresh rate" msgstr "Kecepatan refresh horisontal" #: Xconfig/monitor.pm:143 #, c-format msgid "Vertical refresh rate" msgstr "kecepatan refresh vertikal" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 warna (8 bit)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 ribu warna (15 bit)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 ribu warna (16 bit)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 juta warna (24 bit)" #: Xconfig/resolution_and_depth.pm:133 #, c-format msgid "Resolutions" msgstr "Resolusi" #: Xconfig/resolution_and_depth.pm:270 #, c-format msgid "Choose the resolution and the color depth" msgstr "Pilih resolusi dan kedalaman warna" #: Xconfig/resolution_and_depth.pm:271 #, c-format msgid "Graphics card: %s" msgstr "Kartu grafis: %s" #: Xconfig/resolution_and_depth.pm:285 interactive.pm:424 #: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156 #: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakTermServ:199 standalone/drakTermServ:490 #: standalone/drakbackup:3967 standalone/drakbackup:4027 #: standalone/drakbackup:4071 standalone/drakconnect:165 #: standalone/drakconnect:849 standalone/drakconnect:936 #: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388 #: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506 #: ugtk2.pm:900 ugtk2.pm:923 #, c-format msgid "Ok" msgstr "Ok" #: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89 #: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422 #: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316 #: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:3579 #: standalone/drakautoinst:217 standalone/drakbackup:3893 #: standalone/drakbackup:3897 standalone/drakbackup:3955 #: standalone/drakconnect:164 standalone/drakconnect:934 #: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745 #: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343 #: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900 #, c-format msgid "Cancel" msgstr "Batal" #: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153 #: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519 #: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284 #: standalone/drakbackup:3889 standalone/drakbug:104 #: standalone/drakconnect:160 standalone/drakconnect:245 #: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336 #: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 #: ugtk2.pm:1031 ugtk2.pm:1032 #, c-format msgid "Help" msgstr "Bantuan" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Tes konfigurasi" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Apakah Anda ingin menguji konfigurasi?" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Peringatan: pengujian kartu grafis ini dapat membuat komputer hang" #: Xconfig/test.pm:69 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Terjadi kesalahan:\n" "%s\n" "Cobalah mengubah beberapa paramater" #: Xconfig/test.pm:129 #, c-format msgid "Leaving in %d seconds" msgstr "Keluar dalam %d detik" #: Xconfig/test.pm:129 #, c-format msgid "Is this the correct setting?" msgstr "Apakah seting sudah benar?" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Layout keyboard: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Jenis mouse: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Divais mouse: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "HorizSync Monitor: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "VertRefresh Monitor: %s\n" #: Xconfig/various.pm:37 #, c-format msgid "Graphics card: %s\n" msgstr "Kartu grafis: %s\n" #: Xconfig/various.pm:38 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Memori grafis: %s KB\n" #: Xconfig/various.pm:40 #, c-format msgid "Color depth: %s\n" msgstr "Kedalaman warna: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "Resolution: %s\n" msgstr "Resolusi: %s\n" #: Xconfig/various.pm:43 #, c-format msgid "Xorg driver: %s\n" msgstr "Driver Xorg: %s\n" #: Xconfig/various.pm:72 #, c-format msgid "Graphical interface at startup" msgstr "Antarmuka grafis saat startup" #: Xconfig/various.pm:74 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(Xorg) upon booting.\n" "Would you like Xorg to start when you reboot?" msgstr "" "Komputer Anda bisa diset agar menjalankana antarmuka grafis (Xorg) saat " "booting.\n" "Apakah Anda mau agar Xorg dijalankan ketika Anda reboot?" #: Xconfig/various.pm:87 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Kartu grafik Anda tidak memiliki konektor TV-OUT.\n" "Ia dapat dikonfigurasikan agar bekerja menggunakan frame-buffer.\n" "\n" "Untuk ini Anda harus menyambung kartu grafik ke TV sebelum memboot " "komputer.\n" "Lalu pilih entri \"TVout\" pada bootloader\n" "\n" "Apakah Anda punya fitur ini?" #: Xconfig/various.pm:99 #, c-format msgid "What norm is your TV using?" msgstr "Norm apa yg digunakan TV Anda?" #: Xconfig/xfree.pm:571 #, c-format msgid "" "_:weird aspect ratio\n" "other" msgstr "" "_:aspek rasio aneh\n" "lainnya" #: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462 #: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68 #: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231 #: standalone/service_harddrake:204 #, c-format msgid "Please wait" msgstr "Harap tunggu" #: any.pm:140 #, c-format msgid "Bootloader installation in progress" msgstr "Proses instalasi Bootloader" #: any.pm:151 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO akan memberi Volume ID baru pada drive %s. Namun, mengubah\n" "Volume ID disk boot Windows NT, 2000, atau XP adalah kesalahan Windows yang " "fatal.\n" "Peringatan ini tidak berlaku terhadap disk data Windows 95 atau 98, atau " "NT.\n" "\n" "Beri Volume ID baru?" #: any.pm:162 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Instalasi bootloader gagal. Terjadi kesalahan berikut:" #: any.pm:168 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Anda harus mengganti bootdevice Open Firmware untuk mengaktifkan " "bootloader.\n" " Jika Anda tak melihat prompt bootloader saat reboot, tekan\n" " Command-Option-O-F saat reboot dan ketik:\n" " setenv boot-device %s,\\\\:tbxi\n" " kemudian ketikkan: shut-down\n" "Pada boot berikutnya, Anda akan melihat prompt bootloader." #: any.pm:206 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Anda memutuskan untuk menginstall bootloader pada partisi.\n" "Berarti Anda sudah punya bootloader di harddisk yang Anda boot (mis: System " "Commander).\n" "\n" "Pada drive mana Anda melakukan booting?" #: any.pm:229 help.pm:739 #, c-format msgid "First sector of drive (MBR)" msgstr "Sektor pertama pada drive (MBR)" #: any.pm:230 #, c-format msgid "First sector of the root partition" msgstr "Sektor pertama pada partisi root" #: any.pm:232 #, c-format msgid "On Floppy" msgstr "Pada Disket" #: any.pm:234 help.pm:739 printer/printerdrake.pm:3962 #, c-format msgid "Skip" msgstr "Lewati" #: any.pm:238 #, c-format msgid "LILO/grub Installation" msgstr "Instalasi LILO/grub" #: any.pm:239 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Dimana Anda akan menginstall Bootloader?" #: any.pm:264 standalone/drakboot:307 #, c-format msgid "Boot Style Configuration" msgstr "Konfigurasi Gaya Boot" #: any.pm:266 any.pm:298 #, c-format msgid "Bootloader main options" msgstr "Opsi utama Bootloader" #: any.pm:270 #, c-format msgid "Give the ram size in MB" msgstr "Berikan ukuran RAM dalam MB" #: any.pm:272 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Pilihan ``Batasi parameter command line'' tidak ada gunanya tanpa katasandi" #: any.pm:273 any.pm:606 authentication.pm:176 #, c-format msgid "The passwords do not match" msgstr "Katasandi tidak cocok" #: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270 #, c-format msgid "Please try again" msgstr "Silahkan coba lagi" #: any.pm:278 any.pm:301 #, c-format msgid "Bootloader to use" msgstr "Bootloader yang hendak digunakan" #: any.pm:280 any.pm:303 #, c-format msgid "Boot device" msgstr "Divais boot" #: any.pm:282 #, c-format msgid "Delay before booting default image" msgstr "Jeda sebelum boot ke image default" #: any.pm:283 #, c-format msgid "Enable ACPI" msgstr "Aktifkan ACPI" #: any.pm:285 #, c-format msgid "Force no APIC" msgstr "Tanpa APIC" #: any.pm:287 #, c-format msgid "Force No Local APIC" msgstr "Tanpa APIC Lokal" #: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180 #: network/netconnect.pm:633 printer/printerdrake.pm:1596 #: printer/printerdrake.pm:1716 standalone/drakbackup:1653 #: standalone/drakbackup:3495 standalone/drakups:295 #, c-format msgid "Password" msgstr "Katasandi" #: any.pm:290 any.pm:634 authentication.pm:182 #, c-format msgid "Password (again)" msgstr "Katasandi (lagi)" #: any.pm:291 #, c-format msgid "Restrict command line options" msgstr "Batasi parameter command line" #: any.pm:291 #, c-format msgid "restrict" msgstr "batasi" #: any.pm:293 #, c-format msgid "Clean /tmp at each boot" msgstr "Hapus /tmp tiap kali boot" #: any.pm:294 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Ukuran RAM yang tepat jika diperlukan (ditemukan %d MB)" #: any.pm:302 #, c-format msgid "Init Message" msgstr "Pesan Init" #: any.pm:304 #, c-format msgid "Open Firmware Delay" msgstr "Jeda Open Firmware" #: any.pm:305 #, c-format msgid "Kernel Boot Timeout" msgstr "Timeout Booting Kernel" #: any.pm:306 #, c-format msgid "Enable CD Boot?" msgstr "Aktifkan boot dari CD?" #: any.pm:307 #, c-format msgid "Enable OF Boot?" msgstr "Aktifkan boot dari OF?" #: any.pm:308 #, c-format msgid "Default OS?" msgstr "OS Standar?" #: any.pm:361 #, c-format msgid "Image" msgstr "Image" #: any.pm:362 any.pm:372 #, c-format msgid "Root" msgstr "Root" #: any.pm:363 any.pm:385 #, c-format msgid "Append" msgstr "Tambahkan" #: any.pm:365 standalone/drakboot:309 standalone/drakboot:313 #, c-format msgid "Video mode" msgstr "Mode video" #: any.pm:367 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:368 #, c-format msgid "Network profile" msgstr "Profil Jaringan" #: any.pm:377 any.pm:382 any.pm:384 #, c-format msgid "Label" msgstr "Label" #: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84 #: standalone/drakfloppy:90 standalone/draksec:52 #, c-format msgid "Default" msgstr "Standar" #: any.pm:386 #, c-format msgid "Initrd-size" msgstr "Ukuran Initrd" #: any.pm:388 #, c-format msgid "NoVideo" msgstr "NoVideo" #: any.pm:399 #, c-format msgid "Empty label not allowed" msgstr "Label kosong tidak diperbolehkan" #: any.pm:400 #, c-format msgid "You must specify a kernel image" msgstr "Anda harus menentukan image kernel" #: any.pm:400 #, c-format msgid "You must specify a root partition" msgstr "Anda harus menentukan partisi root" #: any.pm:401 #, c-format msgid "This label is already used" msgstr "Label ini sudah dipakai" #: any.pm:415 #, c-format msgid "Which type of entry do you want to add?" msgstr "Tipe entri mana yang hendak ditambahkan?" #: any.pm:416 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:416 #, c-format msgid "Other OS (SunOS...)" msgstr "OS Lain (SunOS...)" #: any.pm:417 #, c-format msgid "Other OS (MacOS...)" msgstr "OS Lain (MacOS...)" #: any.pm:417 #, c-format msgid "Other OS (Windows...)" msgstr "OS Lain (Windows...)" #: any.pm:445 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Ini adalah daftar pada menu boot Anda yang ada saat ini.\n" "Anda boleh menambah atau mengubah yang sudah ada." #: any.pm:592 #, c-format msgid "access to X programs" msgstr "akses ke program X" #: any.pm:593 #, c-format msgid "access to rpm tools" msgstr "akses ke perkakas rpm" #: any.pm:594 #, c-format msgid "allow \"su\"" msgstr "izinkan \"su\"" #: any.pm:595 #, c-format msgid "access to administrative files" msgstr "akses ke file administratif" #: any.pm:596 #, c-format msgid "access to network tools" msgstr "akses ke perkakas jaringan" #: any.pm:597 #, c-format msgid "access to compilation tools" msgstr "akses ke perkakas kompilasi" #: any.pm:602 #, c-format msgid "(already added %s)" msgstr "(%s sudah ditambahkan)" #: any.pm:607 #, c-format msgid "This password is too simple" msgstr "Katasandi ini terlalu sederhana" #: any.pm:608 #, c-format msgid "Please give a user name" msgstr "Silakan berikan nama pengguna" #: any.pm:609 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Nama pengguna hanya boleh terdiri dari huruf, angka, `-' dan `_'" #: any.pm:610 #, c-format msgid "The user name is too long" msgstr "Nama pengguna terlalu panjang" #: any.pm:611 #, c-format msgid "This user name has already been added" msgstr "Pengguna ini sudah ada sebelumnya" #: any.pm:615 #, c-format msgid "Add user" msgstr "Tambah pengguna" #: any.pm:616 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Masukkan pengguna\n" "%s" #: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 #: interactive/http.pm:151 printer/printerdrake.pm:191 #: printer/printerdrake.pm:376 printer/printerdrake.pm:4742 #: standalone/drakbackup:2708 standalone/scannerdrake:668 #: standalone/scannerdrake:818 #, c-format msgid "Done" msgstr "Selesai" #: any.pm:620 help.pm:51 #, c-format msgid "Accept user" msgstr "Menerima pengguna" #: any.pm:631 #, c-format msgid "Real name" msgstr "Nama asli" #: any.pm:632 standalone/drakbackup:1648 #, c-format msgid "Login name" msgstr "Nama login" #: any.pm:635 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:637 #, c-format msgid "Icon" msgstr "Ikon" #: any.pm:684 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Login otomatis" #: any.pm:685 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "Komputer dapat diset agar secara otomatis login dengan satu pengguna." #: any.pm:686 help.pm:51 #, c-format msgid "Do you want to use this feature?" msgstr "Apakah Anda ingin menggunakan fitur ini?" #: any.pm:687 #, c-format msgid "Choose the default user:" msgstr "Pilih pengguna standar:" #: any.pm:688 #, c-format msgid "Choose the window manager to run:" msgstr "Pilih window manajer yang akan dijalankan:" #: any.pm:700 #, c-format msgid "Please choose a language to use." msgstr "Pilihlah bahasa yang akan dipakai." #: any.pm:701 #, c-format msgid "Language choice" msgstr "Pilihan bahasa" #: any.pm:727 #, c-format msgid "" "Mandrakelinux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandrakelinux mendukung beberapa bahasa. Pilihlah\n" "bahasa yang akan diinstall. Bahasa pilihan akan ditampilkan\n" "setelah proses instalasi selesai dan Anda merestart sistem Anda." #: any.pm:746 help.pm:647 #, c-format msgid "Use Unicode by default" msgstr "Gunakan Unicode sebagai standar" #: any.pm:747 help.pm:647 #, c-format msgid "All languages" msgstr "Semua bahasa" #: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946 #, c-format msgid "Country / Region" msgstr "Negara / Wilayah" #: any.pm:787 #, c-format msgid "Please choose your country." msgstr "Pilih negara Anda." #: any.pm:789 #, c-format msgid "Here is the full list of available countries" msgstr "Berikut adalah daftar lengkap negara yang tersedia" #: any.pm:790 #, c-format msgid "Other Countries" msgstr "Negara lain" #: any.pm:798 #, c-format msgid "Input method:" msgstr "Metode Input:" #: any.pm:799 install_any.pm:388 network/netconnect.pm:323 #: network/netconnect.pm:328 printer/printerdrake.pm:99 #: printer/printerdrake.pm:2111 #, c-format msgid "None" msgstr "Tak ada" #: any.pm:914 #, c-format msgid "No sharing" msgstr "Tanpa sharing" #: any.pm:914 #, c-format msgid "Allow all users" msgstr "Izinkan semua pengguna" #: any.pm:918 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Apakah Anda mengijinkan pengguna melakukan sharing pada direktori mereka?\n" "Mengijinkan hal ini akan membuat pengguna dapat meng-klik \"Share\" pada " "konqueror and nautilus.\n" "\n" "\"Custom\" memungkinkan tuning masing-masing pengguna.\n" #: any.pm:930 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: Sistem file sharing tradisional Unix, dengan dukungan Windows dan Mac" #: any.pm:933 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: Sistem file sharing yang digunakan Windows, Mac OS X dan sistem Linux " "modern" #: any.pm:941 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "Anda dapat mengekspor menggunakan NFS atau SMB. Pilih yang hendak Anda " "gunakan." #: any.pm:966 #, c-format msgid "Launch userdrake" msgstr "Jalankan userdrake" #: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805 #: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807 #: printer/printerdrake.pm:5036 standalone/drakTermServ:294 #: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499 #: standalone/drakfont:595 standalone/net_monitor:123 #: standalone/printerdrake:547 #, c-format msgid "Close" msgstr "Tutup" #: any.pm:968 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Sharing setiap user menggunakan grup \"fileshare\". \n" "Anda menggunakan userdrake untuk menambah user pada grup ini." #: authentication.pm:16 #, c-format msgid "Local file" msgstr "File lokal" #: authentication.pm:17 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:18 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:19 #, c-format msgid "Smart Card" msgstr "Kartu Pintar" #: authentication.pm:20 authentication.pm:148 #, c-format msgid "Windows Domain" msgstr "Domain Windows" #: authentication.pm:21 #, c-format msgid "Active Directory with SFU" msgstr "Active Directory dengan SFU" #: authentication.pm:22 #, c-format msgid "Active Directory with Winbind" msgstr "Active Directory dengan Winbind" #: authentication.pm:51 #, c-format msgid "Local file:" msgstr "File lokal:" #: authentication.pm:51 #, c-format msgid "" "Use local for all authentication and information user tell in local file" msgstr "" "Gunakan lokal untuk semua otentikasi dan informasi pengguna dalam file lokal" #: authentication.pm:52 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:52 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" "Memberitahu komputer untuk menggunakan LDAP untuk beberapa atau semua " "otentikasi.LDAP mengkonsolisadi beberapa jenis informasi dalam organisasi " "Anda." #: authentication.pm:53 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:53 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" "Mengijinkan Anda untuk menjalankan sekelompok komputer dalam domain NIS yang " "sama dengan password umum dan file grup." #: authentication.pm:54 #, c-format msgid "Windows Domain:" msgstr "Domain Windows:" #: authentication.pm:54 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "Winbind mengijinkan sistem untuk menerima informasi dan mengotentikasi " "pengguna dalam domain Windows" #: authentication.pm:55 #, c-format msgid "Active Directory with SFU:" msgstr "Active Directory dengan SFU:" #: authentication.pm:55 authentication.pm:56 #, c-format msgid "" "Kerberos is a secure system for providing network authentication services." msgstr "" "Kerberos adalah sistem yang aman untuk menyediakan layanan otentikasi " "jaringan." #: authentication.pm:56 #, c-format msgid "Active Directory with Winbind:" msgstr "Active Directory dengan Winbind:" #: authentication.pm:81 #, c-format msgid "Authentication LDAP" msgstr "Otentikasi LDAP" #: authentication.pm:82 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: authentication.pm:83 share/compssUsers.pl:101 #, c-format msgid "LDAP Server" msgstr "Server LDAP" #: authentication.pm:96 fsedit.pm:21 #, c-format msgid "simple" msgstr "sederhana" #: authentication.pm:97 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:98 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:99 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "layout keamanan (SASL/Kerberos)" #: authentication.pm:106 authentication.pm:144 #, c-format msgid "Authentication Active Directory" msgstr "Otentikasi Active Directory" #: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Domain" #: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146 #: printer/printerdrake.pm:135 share/compssUsers.pl:81 #: standalone/drakTermServ:269 #, c-format msgid "Server" msgstr "Server" #: authentication.pm:110 #, c-format msgid "LDAP users database" msgstr "Database pengguna LDAP" #: authentication.pm:111 #, c-format msgid "Use Anonymous BIND " msgstr "Gunakan BIND anonymous" #: authentication.pm:112 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "Pengguna LDAP diijinkan untuk menjelajah Active Directory" #: authentication.pm:113 #, c-format msgid "Password for user" msgstr "Katasandi untuk pengguna" #: authentication.pm:114 #, c-format msgid "Encryption" msgstr "Enkripsi" #: authentication.pm:125 #, c-format msgid "Authentication NIS" msgstr "Otentikasi NIS" #: authentication.pm:126 #, c-format msgid "NIS Domain" msgstr "Domain NIS" #: authentication.pm:127 #, c-format msgid "NIS Server" msgstr "Server NIS" #: authentication.pm:132 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Agar dapat bekerja dengan PDC W2K, Anda mungkin perlu minta tolong admin " "menjalankan: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" " "everyone / add dan me-reboot server.\n" "Anda mungkin juga perlu nama pengguna/katasandi Admin Domain untuk " "menggabungkan komputer ke domain Windows(TM).\n" "Jika jaringan belum aktif, Drakx akan mencoba bergabung dengan domain " "setelah tahapan setup jaringan.\n" "Jika setup dan otentikasi domain gagal, jalankan 'smbpasswd -j DOMAIN -U USER" "%%PASSWORD' menggunakan Domain Windows(tm) Anda, dan Nama pengguna/Katasandi " "Admin, setelah boot system.\n" "Perintah 'wbinfo -t' akan menguji apakah rahasia otentikasi Anda baik." #: authentication.pm:144 #, c-format msgid "Authentication Windows Domain" msgstr "Otentikasi Domain Windows" #: authentication.pm:149 #, c-format msgid "Domain Admin User Name" msgstr "Nama Pengguna Admin Domain" #: authentication.pm:150 #, c-format msgid "Domain Admin Password" msgstr "Katasandi Admin Domain" #: authentication.pm:151 #, c-format msgid "Use Idmap for store UID/SID " msgstr "Gunakan Idmap untuk menyimpan UID/SID" #: authentication.pm:152 #, c-format msgid "Default Idmap " msgstr "Idmap standar" #: authentication.pm:165 #, c-format msgid "Set administrator (root) password and network authentication methods" msgstr "Tentukan katasandi root dan metode otentikasi jaringan." #: authentication.pm:166 #, c-format msgid "Set administrator (root) password" msgstr "Tentukan katasandi root" #: authentication.pm:167 standalone/drakvpn:1125 #, c-format msgid "Authentication method" msgstr "Metode otentikasi" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:172 help.pm:722 #, c-format msgid "No password" msgstr "Tanpa katasandi" #: authentication.pm:178 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Katasandi ini terlalu pendek (paling tidak harus %d karakter)" #: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634 #: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459 #, c-format msgid "Authentication" msgstr "Otentikasi" #: authentication.pm:296 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Tidak dapat menggunakan broadcast tanpa domain NIS" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:728 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Selamat datang di pemilih sistem operasi!\n" "\n" "Pilih sistem operasi pada daftar di atas atau \n" "tunggu untuk boot default.\n" "\n" #: bootloader.pm:815 #, c-format msgid "LILO with graphical menu" msgstr "LILO dengan menu grafis" #: bootloader.pm:816 #, c-format msgid "LILO with text menu" msgstr "LILO dengan menu teks" #: bootloader.pm:817 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:818 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:881 #, c-format msgid "not enough room in /boot" msgstr "tidak cukup ruang pada /boot" #: bootloader.pm:1295 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Anda tidak dapat menginstal bootloader pada partisi %s\n" #: bootloader.pm:1340 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "Konfigurasi bootloader Anda harus diupdate karena nomor partisi telah berubah" #: bootloader.pm:1355 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "Bootloader tidak bisa diinstall dengan benar. Anda harus melakukan boot " "penyelamatan dan memilih \"%s\"" #: bootloader.pm:1356 #, c-format msgid "Re-install Boot Loader" msgstr "Instal ulang Boot Loader" #: common.pm:125 #, c-format msgid "KB" msgstr "KB" #: common.pm:125 #, c-format msgid "MB" msgstr "MB" #: common.pm:125 #, c-format msgid "GB" msgstr "GB" #: common.pm:133 #, c-format msgid "TB" msgstr "TB" #: common.pm:141 #, c-format msgid "%d minutes" msgstr "%d menit" #: common.pm:143 #, c-format msgid "1 minute" msgstr "1 menit" #: common.pm:145 #, c-format msgid "%d seconds" msgstr "%d detik" #: common.pm:240 #, c-format msgid "kdesu missing" msgstr "kdesu hilang" #: common.pm:243 #, c-format msgid "consolehelper missing" msgstr "consolehelper hilang" #: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50 #: network/adsl_consts.pm:58 network/adsl_consts.pm:66 #, c-format msgid "Austria" msgstr "Austria" #: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74 #: network/adsl_consts.pm:82 network/adsl_consts.pm:93 #: network/adsl_consts.pm:101 network/netconnect.pm:50 #, c-format msgid "Belgium" msgstr "Belgia" #: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780 #: network/adsl_consts.pm:788 network/adsl_consts.pm:798 #, c-format msgid "Switzerland" msgstr "Switzerland" #: crypto.pm:17 lang.pm:237 #, c-format msgid "Costa Rica" msgstr "Costa Rika" #: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319 #, c-format msgid "Czech Republic" msgstr "Republik Ceko" #: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437 #: network/adsl_consts.pm:445 #, c-format msgid "Germany" msgstr "Jerman" #: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343 #: network/adsl_consts.pm:354 network/adsl_consts.pm:365 #: network/adsl_consts.pm:375 network/adsl_consts.pm:385 #: network/adsl_consts.pm:396 network/adsl_consts.pm:407 #: network/adsl_consts.pm:417 network/adsl_consts.pm:427 #: network/netconnect.pm:47 #, c-format msgid "France" msgstr "Perancis" #: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455 #, c-format msgid "Greece" msgstr "Yunani" #: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463 #, c-format msgid "Hungary" msgstr "Hungaria" #: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489 #: network/adsl_consts.pm:499 network/adsl_consts.pm:509 #: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47 #, c-format msgid "Italy" msgstr "itali" #: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545 #: network/adsl_consts.pm:553 network/adsl_consts.pm:561 #: network/adsl_consts.pm:569 network/netconnect.pm:48 #, c-format msgid "Netherlands" msgstr "Belanda" #: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577 #: network/adsl_consts.pm:582 network/adsl_consts.pm:587 #: network/adsl_consts.pm:592 network/adsl_consts.pm:597 #: network/adsl_consts.pm:602 network/adsl_consts.pm:607 #, c-format msgid "Norway" msgstr "Norwegia" #: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614 #: network/adsl_consts.pm:624 #, c-format msgid "Poland" msgstr "Polandia" #: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772 #, c-format msgid "Sweden" msgstr "Swedia" #: crypto.pm:28 lang.pm:382 #, c-format msgid "Slovakia" msgstr "Slovakia" #: crypto.pm:29 lang.pm:406 #, c-format msgid "Taiwan" msgstr "Taiwan" #: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51 #, c-format msgid "United States" msgstr "Amerika Serikat" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV adalah protokol yang memungkinkan Anda me-mount direktori server web\n" "secara lokal, dan menganggapnya seperti sistem file lokal (web server \n" "dikonfigurasikan sebagai server WebDAV). Jika Anda ingin menambah titik " "mount\n" "WebDav, pilih \"Baru\"." #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Baru" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Unmount" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Mount" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:435 #: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672 #: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Titik mount" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Masukkan URL server WebDAV" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL harus dimulai dengan http:// atau https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Server: " #: diskdrake/dav.pm:110 diskdrake/interactive.pm:504 #: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241 #, c-format msgid "Mount point: " msgstr "Titik mount: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248 #, c-format msgid "Options: %s" msgstr "Opsi: %s" #: diskdrake/hd_gtk.pm:95 #, c-format msgid "Please make a backup of your data first" msgstr "Buatlah backup data Anda terlebih dahulu" #: diskdrake/hd_gtk.pm:98 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Jika Anda ingin menggunakan aboot, sisakan ruang kosong (cukup 2048 sektor) " "di awal disk" #: diskdrake/hd_gtk.pm:155 help.pm:530 #, c-format msgid "Wizard" msgstr "Wizard" #: diskdrake/hd_gtk.pm:188 #, c-format msgid "Choose action" msgstr "Pilih aksi" #: diskdrake/hd_gtk.pm:192 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Anda punya satu partisi besar Windows Microsoft.\n" "Disarankan untuk mengubah ukuran partisi ini\n" "(klik di situ, lalu pilih \"Ubah ukuran\")" #: diskdrake/hd_gtk.pm:194 #, c-format msgid "Please click on a partition" msgstr "Silakan klik pada partisi" #: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482 #: standalone/drakbackup:2943 standalone/drakbackup:3003 #, c-format msgid "Details" msgstr "Detil" #: diskdrake/hd_gtk.pm:254 #, c-format msgid "No hard drives found" msgstr "Harddisk tak ditemukan" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Journalised FS" msgstr "FS terjournal" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:338 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168 #: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Lainnya" #: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181 #, c-format msgid "Empty" msgstr "Kosong" #: diskdrake/hd_gtk.pm:343 #, c-format msgid "Filesystem types:" msgstr "Tipe filesystem:" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``%s'' instead" msgstr "Gunakan ``%s'' saja" #: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459 #, c-format msgid "Create" msgstr "Buat" #: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 #: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #: standalone/harddrake2:106 standalone/harddrake2:115 #, c-format msgid "Type" msgstr "Tipe" #. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE #: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444 #: standalone/drakperm:124 standalone/printerdrake:235 #, c-format msgid "Delete" msgstr "Hapus" #: diskdrake/hd_gtk.pm:368 #, c-format msgid "Use ``Unmount'' first" msgstr "Gunakan ``unmount'' terlebih dahulu" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose another partition" msgstr "Pilih partisi lain" #: diskdrake/interactive.pm:191 #, c-format msgid "Choose a partition" msgstr "Pilih partisi" #: diskdrake/interactive.pm:220 #, c-format msgid "Exit" msgstr "Keluar" #: diskdrake/interactive.pm:253 help.pm:530 #, c-format msgid "Undo" msgstr "Kembali" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to normal mode" msgstr "Ubah ke modus normal" #: diskdrake/interactive.pm:253 #, c-format msgid "Toggle to expert mode" msgstr "Ubah ke modus ahli" #: diskdrake/interactive.pm:272 #, c-format msgid "Continue anyway?" msgstr "Lanjutkan?" #: diskdrake/interactive.pm:275 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "Anda harus memformat partisi %s.\n" "Jika tidak, tidak ada daftar titik mount %s yang ditulis pada fstab.\n" "Berhenti?" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without saving" msgstr "Keluar tanpa menyimpan" #: diskdrake/interactive.pm:282 #, c-format msgid "Quit without writing the partition table?" msgstr "Keluar dari program tanpa menulis tabel partisi?" #: diskdrake/interactive.pm:287 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Apakah Anda ingin menyimpan modifikasi /etc/fstab" #: diskdrake/interactive.pm:294 install_steps_interactive.pm:329 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku" #: diskdrake/interactive.pm:307 help.pm:530 #, c-format msgid "Clear all" msgstr "Hapus semua" #: diskdrake/interactive.pm:308 help.pm:530 #, c-format msgid "Auto allocate" msgstr "Alokasi otomatis" #: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 #: help.pm:855 install_steps_interactive.pm:122 #, c-format msgid "More" msgstr "Selebihnya" #: diskdrake/interactive.pm:314 #, c-format msgid "Hard drive information" msgstr "Info hard drive" #: diskdrake/interactive.pm:346 #, c-format msgid "All primary partitions are used" msgstr "Semua partisi primary telah digunakan" #: diskdrake/interactive.pm:347 #, c-format msgid "I can not add any more partitions" msgstr "Tidak bisa menambah partisi lagi" #: diskdrake/interactive.pm:348 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Untuk menambahkan partisi, hapus salah satu satu agar dapat membuat partisi " "extended" #: diskdrake/interactive.pm:359 help.pm:530 #, c-format msgid "Save partition table" msgstr "Simpan tabel partisi" #: diskdrake/interactive.pm:360 help.pm:530 #, c-format msgid "Restore partition table" msgstr "Kembalikan tabel partisi" #: diskdrake/interactive.pm:361 help.pm:530 #, c-format msgid "Rescue partition table" msgstr "Selamatkan tabel partisi" #: diskdrake/interactive.pm:363 help.pm:530 #, c-format msgid "Reload partition table" msgstr "Muat ulang tabel partisi" #: diskdrake/interactive.pm:365 #, c-format msgid "Removable media automounting" msgstr "Mount otomatis media removable" #: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402 #, c-format msgid "Select file" msgstr "Pilih file" #: diskdrake/interactive.pm:388 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Backup tabel partisi tidak memiliki ukuran yang sama\n" "Lanjutkan?" #: diskdrake/interactive.pm:417 #, c-format msgid "Trying to rescue partition table" msgstr "Mencoba menyelamatkan tabel partisi" #: diskdrake/interactive.pm:423 #, c-format msgid "Detailed information" msgstr "Informasi detail" #: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743 #, c-format msgid "Resize" msgstr "Ubah ukuran" #: diskdrake/interactive.pm:439 #, c-format msgid "Format" msgstr "Format" #: diskdrake/interactive.pm:441 #, c-format msgid "Add to RAID" msgstr "Tambahkan ke RAID" #: diskdrake/interactive.pm:442 #, c-format msgid "Add to LVM" msgstr "Tambahkan ke LVM" #: diskdrake/interactive.pm:445 #, c-format msgid "Remove from RAID" msgstr "Hapus dari RAID" #: diskdrake/interactive.pm:446 #, c-format msgid "Remove from LVM" msgstr "Hapus dari LVM" #: diskdrake/interactive.pm:447 #, c-format msgid "Modify RAID" msgstr "Ganti RAID" #: diskdrake/interactive.pm:448 #, c-format msgid "Use for loopback" msgstr "Gunakan untuk loopback" #: diskdrake/interactive.pm:497 #, c-format msgid "Create a new partition" msgstr "Membuat partisi baru" #: diskdrake/interactive.pm:500 #, c-format msgid "Start sector: " msgstr "Sektor awal: " #: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899 #, c-format msgid "Size in MB: " msgstr "Ukuran dalam MB: " #: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900 #, c-format msgid "Filesystem type: " msgstr "Tipe filesystem: " #: diskdrake/interactive.pm:508 #, c-format msgid "Preference: " msgstr "Preferensi: " #: diskdrake/interactive.pm:511 #, c-format msgid "Logical volume name " msgstr "Nama volume logical " #: diskdrake/interactive.pm:541 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Anda tidak dapat membuat partisi baru\n" "(karena jumlah maksimal partisi primer telah tercapai).\n" "Hapuslah satu partisi primer dan buatlah partisi extended." #: diskdrake/interactive.pm:571 #, c-format msgid "Remove the loopback file?" msgstr "Hapus file loopback?" #: diskdrake/interactive.pm:590 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Setelah mengganti tipe partisi %s, semua data pada partisi ini akan hilang" #: diskdrake/interactive.pm:602 #, c-format msgid "Change partition type" msgstr "Mengubah tipe partisi" #: diskdrake/interactive.pm:603 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Filesystem apa yang Anda inginkan?" #: diskdrake/interactive.pm:611 #, c-format msgid "Switching from ext2 to ext3" msgstr "Pindah dari ext2 ke ext3" #: diskdrake/interactive.pm:640 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Dimana Anda akan melakukan mount file loopback %s?" #: diskdrake/interactive.pm:641 #, c-format msgid "Where do you want to mount device %s?" msgstr "Dimana Anda akan melakukan mount divais %s?" #: diskdrake/interactive.pm:646 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Tidak bisa unset mount point karena partisi ini sudah digunakan untuk\n" "loopback. Hapus dulu loopbacknya." #: diskdrake/interactive.pm:671 #, c-format msgid "Where do you want to mount %s?" msgstr "Dimana Anda akan melakukan mount %s?" #: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774 #: install_interactive.pm:156 install_interactive.pm:188 #, c-format msgid "Resizing" msgstr "Mengubah ukuran" #: diskdrake/interactive.pm:695 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Menghitung batas filesystem FAT" #: diskdrake/interactive.pm:731 #, c-format msgid "This partition is not resizeable" msgstr "Ukuran partisi ini tidak dapat diubah" #: diskdrake/interactive.pm:736 #, c-format msgid "All data on this partition should be backed-up" msgstr "Semua data pada partisi ini sebaiknya dibackup dulu" #: diskdrake/interactive.pm:738 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Setelah merubah ukuran partisi %s, semua data pada partisi ini akan hilang" #: diskdrake/interactive.pm:743 #, c-format msgid "Choose the new size" msgstr "Pilih ukuran baru" #: diskdrake/interactive.pm:744 #, c-format msgid "New size in MB: " msgstr "Ukuran baru dalam MB: " #: diskdrake/interactive.pm:787 install_interactive.pm:196 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" "Untuk memastikan integritas data setelah ukuran partisi berubah,\n" "pengujian sistem file akan dilakukan pada boot berikut dalam Windows(TM)" #: diskdrake/interactive.pm:825 #, c-format msgid "Choose an existing RAID to add to" msgstr "Pilih RAID yang ada untuk ditambahkan ke" #: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844 #, c-format msgid "new" msgstr "baru" #: diskdrake/interactive.pm:842 #, c-format msgid "Choose an existing LVM to add to" msgstr "Pilih LVM yang ada untuk ditambahkan ke" #: diskdrake/interactive.pm:848 #, c-format msgid "LVM name?" msgstr "nama LVM?" #: diskdrake/interactive.pm:884 #, c-format msgid "This partition can not be used for loopback" msgstr "Partisi ini tidak bisa dipakai sebagai loopback" #: diskdrake/interactive.pm:897 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:898 #, c-format msgid "Loopback file name: " msgstr "Nama file loopback: " #: diskdrake/interactive.pm:903 #, c-format msgid "Give a file name" msgstr "Berikan nama file" #: diskdrake/interactive.pm:906 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "File sudah digunakan oleh loopback lain, pilih yang lainnya" #: diskdrake/interactive.pm:907 #, c-format msgid "File already exists. Use it?" msgstr "File sudah ada. Gunakan file ini ?" #: diskdrake/interactive.pm:930 #, c-format msgid "Mount options" msgstr "Opsi mount" #: diskdrake/interactive.pm:937 #, c-format msgid "Various" msgstr "Macam-macam" #: diskdrake/interactive.pm:1002 #, c-format msgid "device" msgstr "divais" #: diskdrake/interactive.pm:1003 #, c-format msgid "level" msgstr "level" #: diskdrake/interactive.pm:1004 #, c-format msgid "chunk size in KiB" msgstr "ukuran chunk dalam KiB" #: diskdrake/interactive.pm:1021 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Hati-hati: operasi ini berbahaya" #: diskdrake/interactive.pm:1036 #, c-format msgid "What type of partitioning?" msgstr "Tipe partisi apa yang hendak digunakan?" #: diskdrake/interactive.pm:1074 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku" #: diskdrake/interactive.pm:1083 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Tabel partisi pada drive %s akan ditulis ke disk!" #: diskdrake/interactive.pm:1096 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Setelah memformat partisi %s semua data pada partisi ini akan hilang" #: diskdrake/interactive.pm:1112 #, c-format msgid "Move files to the new partition" msgstr "Memindahkan file ke partisi baru" #: diskdrake/interactive.pm:1112 #, c-format msgid "Hide files" msgstr "Sembunyikan file" #: diskdrake/interactive.pm:1113 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Direktori %s telah berisi data\n" "(%s)" #: diskdrake/interactive.pm:1124 #, c-format msgid "Moving files to the new partition" msgstr "Memindahkan file ke partisi baru" #: diskdrake/interactive.pm:1128 #, c-format msgid "Copying %s" msgstr "Menyalin %s" #: diskdrake/interactive.pm:1132 #, c-format msgid "Removing %s" msgstr "Menghapus %s" #: diskdrake/interactive.pm:1146 #, c-format msgid "partition %s is now known as %s" msgstr "partisi %s sekarang dikenali sebagai %s" #: diskdrake/interactive.pm:1147 #, c-format msgid "Partitions have been renumbered: " msgstr "Telah terjadi penomoran ulang pada partisi:" #: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226 #, c-format msgid "Device: " msgstr "Divais: " #: diskdrake/interactive.pm:1168 #, c-format msgid "Devfs name: " msgstr "Nama Devfs: " #: diskdrake/interactive.pm:1169 #, c-format msgid "Volume label: " msgstr "Label Volume: " #: diskdrake/interactive.pm:1170 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Huruf drive DOS : %s (hanya tebakan)\n" #: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183 #: diskdrake/interactive.pm:1244 #, c-format msgid "Type: " msgstr "Tipe: " #: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296 #, c-format msgid "Name: " msgstr "Nama: " #: diskdrake/interactive.pm:1185 #, c-format msgid "Start: sector %s\n" msgstr "Mulai: sektor %s\n" #: diskdrake/interactive.pm:1186 #, c-format msgid "Size: %s" msgstr "Ukuran: %s" #: diskdrake/interactive.pm:1188 #, c-format msgid ", %s sectors" msgstr ", %s sektor" #: diskdrake/interactive.pm:1190 #, c-format msgid "Cylinder %d to %d\n" msgstr "Silinder %d sampai %d\n" #: diskdrake/interactive.pm:1191 #, c-format msgid "Number of logical extents: %d" msgstr "Jumlah logical extend: %d" #: diskdrake/interactive.pm:1192 #, c-format msgid "Formatted\n" msgstr "Telah diformat\n" #: diskdrake/interactive.pm:1193 #, c-format msgid "Not formatted\n" msgstr "Belum diformat\n" #: diskdrake/interactive.pm:1194 #, c-format msgid "Mounted\n" msgstr "Telah di-mount\n" #: diskdrake/interactive.pm:1195 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1197 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "File loopback:\n" " %s\n" #: diskdrake/interactive.pm:1198 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Partisi di-boot secara default\n" " (untuk MS-DOS boot, bukan untuk lilo)\n" #: diskdrake/interactive.pm:1200 #, c-format msgid "Level %s\n" msgstr "Level %s\n" #: diskdrake/interactive.pm:1201 #, c-format msgid "Chunk size %d KiB\n" msgstr "Ukuran chunk %d KiB\n" #: diskdrake/interactive.pm:1202 #, c-format msgid "RAID-disks %s\n" msgstr "Disk RAID %s\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Loopback file name: %s" msgstr "Nama file loopback: %s" #: diskdrake/interactive.pm:1207 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Mungkin partisi ini adalah \n" "partisi Driver, sebaiknya\n" "biarkan begitu saja.\n" #: diskdrake/interactive.pm:1210 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Partisi bootstrap khusus ini \n" "digunakan oleh sistem dual boot.\n" #: diskdrake/interactive.pm:1227 #, c-format msgid "Read-only" msgstr "Baca-saja" #: diskdrake/interactive.pm:1228 #, c-format msgid "Size: %s\n" msgstr "Ukuran: %s\n" #: diskdrake/interactive.pm:1229 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Ukuran: %s silinder, %s head, %s sektor\n" #: diskdrake/interactive.pm:1230 #, c-format msgid "Info: " msgstr "Info: " #: diskdrake/interactive.pm:1231 #, c-format msgid "LVM-disks %s\n" msgstr "Disk LVM %s\n" #: diskdrake/interactive.pm:1232 #, c-format msgid "Partition table type: %s\n" msgstr "Tipe tabel partisi: %s\n" #: diskdrake/interactive.pm:1233 #, c-format msgid "on channel %d id %d\n" msgstr "pada kanal %d id %d\n" #: diskdrake/interactive.pm:1265 #, c-format msgid "Filesystem encryption key" msgstr "Kunci enkripsi sistem file" #: diskdrake/interactive.pm:1266 #, c-format msgid "Choose your filesystem encryption key" msgstr "Pilih kunci enkripsi sistem file Anda" #: diskdrake/interactive.pm:1269 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "Kunci enkripsi ini terlalu mudah (harus paling tidak %d karakter)" #: diskdrake/interactive.pm:1270 #, c-format msgid "The encryption keys do not match" msgstr "Kunci enkripsi tidak sesuai" #: diskdrake/interactive.pm:1273 network/netconnect.pm:1136 #: standalone/drakconnect:397 #, c-format msgid "Encryption key" msgstr "Kunci enkripsi" #: diskdrake/interactive.pm:1274 #, c-format msgid "Encryption key (again)" msgstr "Kunci enkripsi (lagi)" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Ubah tipe" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "Gagal login dengan nama pengguna %s (katasandi salah?)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Otentikasi Domain Dibutuhkan" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Nama pengguna yang mana" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Yang lain" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Masukkan nama pengguna, katasandi dan nama domain untuk mengakses host ini." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494 #, c-format msgid "Username" msgstr "Nama pengguna" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Cari Server" #: diskdrake/smbnfs_gtk.pm:210 #, c-format msgid "Search new servers" msgstr "Cari server baru" #: do_pkgs.pm:16 do_pkgs.pm:31 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Paket %s perlu diupgrade. Anda ingin instal?" #: do_pkgs.pm:21 do_pkgs.pm:36 #, c-format msgid "Mandatory package %s is missing" msgstr "Paket wajib %s hilang" #: do_pkgs.pm:172 #, c-format msgid "Installing packages..." msgstr "Menginstall paket..." #: do_pkgs.pm:217 #, c-format msgid "Removing packages..." msgstr "Menghapus paket..." #: fs.pm:487 fs.pm:536 #, c-format msgid "Mounting partition %s" msgstr "Mounting partisi %s" #: fs.pm:488 fs.pm:537 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "proses mounting partisi %s pada direktori %s gagal" #: fs.pm:508 fs.pm:515 #, c-format msgid "Checking %s" msgstr "Menguji %s" #: fs.pm:553 partition_table.pm:391 #, c-format msgid "error unmounting %s: %s" msgstr "kesalahan melakukan unmount %s: %s" #: fs.pm:585 #, c-format msgid "Enabling swap partition %s" msgstr "Aktifkan partisi swap %s" #: fs/format.pm:44 fs/format.pm:51 #, c-format msgid "Formatting partition %s" msgstr "Memformat partisi %s" #: fs/format.pm:48 #, c-format msgid "Creating and formatting file %s" msgstr "Membuat dan memformat file %s" #: fs/format.pm:83 #, c-format msgid "I do not know how to format %s in type %s" msgstr "tidak bisa melakukan format %s pada tipe %s" #: fs/format.pm:88 fs/format.pm:90 #, c-format msgid "%s formatting of %s failed" msgstr "%s proses pemformatan dari %s gagal" #: fs/mount_options.pm:112 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Jangan update waktu akses inode di sistem file ini\n" "(mis: untuk akses lebih cepat di spool berita untuk mempercepat server " "berita)." #: fs/mount_options.pm:115 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Hanya dapat di-mount secara eksplisit\n" "(opsi -a takkan me-mount sistem file)." #: fs/mount_options.pm:118 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" "Jangan interpretasi divais karakter atau blok spesial pada sistem file." #: fs/mount_options.pm:120 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Jangan izinkan eksekusi biner di sistem file ter-mount. Opsi ini berguna\n" "bagi server yang memiliki sistem file berisi biner untuk arsitektur berbeda." #: fs/mount_options.pm:124 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Tidak memberlakukan bit set-user-identifier atau set-group-identifier.\n" "(Tampaknya aman, tapi sebenarnya lebih berbahaya kecuali jika Anda telah " "menginstal\n" "suidperl(1).)" #: fs/mount_options.pm:128 #, c-format msgid "Mount the file system read-only." msgstr "Mount sistem file read-only." #: fs/mount_options.pm:130 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "Semua I/O ke sistem file harus dilakukan secara sinkron." #: fs/mount_options.pm:134 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" "Izinkan pengguna biasa me-mount sistem file.\n" "Nama pe-mount ditulis di mtab sehingga ia dapat meng-unmount sistem file\n" "lagi. Opsi ini mempengaruhi opsi noexec, nosuid, dan nodev\n" "(kecuali jika ditimpa opsi berikutnya, seperti user,exec,dev,suid di baris\n" "opsi)." #: fs/mount_options.pm:142 #, c-format msgid "Give write access to ordinary users" msgstr "Berikan akses tulis pada pengguna biasa" #: fs/mount_options.pm:144 #, c-format msgid "Give read-only access to ordinary users" msgstr "Berikan akses baca pada pengguna biasa" #: fs/type.pm:370 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "JFS tidak dapat dipakai untuk partisi berukuran di bawah 16MB" #: fs/type.pm:371 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "ReiserFS tidak dapat dipakai untuk partisi berukuran di bawah 32MB" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "dengan /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "server" #: fsedit.pm:184 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Tidak bisa membaca tabel partisi dari divais %s, rusak terlalu parah :(\n" "Saya dapat mencoba untuk menghapus partisi yang rusak (SEMUA DATA AKAN " "HILANG!).\n" "Solusi lainnya adalah melarang DrakX memodifikasi tabel partisi.\n" "(pesan kesalahannya adalah %s)\n" "\n" "Anda setuju untuk kehilangan semua partisi?\n" #: fsedit.pm:401 #, c-format msgid "Mount points must begin with a leading /" msgstr "Mount point harus diawali dengan /" #: fsedit.pm:402 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Titik mount hanya mengandung huruf atau angka" #: fsedit.pm:403 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Partisi dengan titik mount %s sudah ada\n" #: fsedit.pm:405 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Anda telah memilih partisi RAID software sebagai root (/).\n" "Tanpa partisi /boot, bootloader tidak dapat berbuat apa-apa.\n" "Hati-hati dalam menambahkan partisi /boot" #: fsedit.pm:408 #, c-format msgid "You can not use a LVM Logical Volume for mount point %s" msgstr "Anda tidak dapat menggunakan LVM Logical Volume untuk titik mount %s." #: fsedit.pm:410 #, c-format msgid "" "You've selected a LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Anda telah memilih Volume Logical LVM software sebagai root (/).\n" "Tanpa partisi /boot, bootloader tidak dapat berbuat apa-apa.\n" "Hati-hati dalam menambahkan partisi /boot" #: fsedit.pm:413 #, c-format msgid "" "You may not be able to install lilo (since lilo does not handle a LV on " "multiple PVs)" msgstr "" "Anda mungkin tidak bisa menginstall lilo (karena lilo tidak menangani LV " "pada banyak PV)" #: fsedit.pm:416 fsedit.pm:418 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Direktori ini harus ada pada sistem file root" #: fsedit.pm:420 fsedit.pm:422 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Anda perlu file sistem yang sesungguhnya (ext2, reiserfs, xfs, atau jfs) " "untuk titik mount ini\n" #: fsedit.pm:424 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "" "Anda tidak dapat menggunakan sistem file terenkripsi untuk mount point %s" #: fsedit.pm:485 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Tidak cukup ruangan untuk alokasi otomatis" #: fsedit.pm:487 #, c-format msgid "Nothing to do" msgstr "Tidak ada yang dikerjakan" #: harddrake/data.pm:61 install_any.pm:1505 #, c-format msgid "Floppy" msgstr "Disket" #: harddrake/data.pm:71 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:81 install_any.pm:1506 #, c-format msgid "Hard Disk" msgstr "Hard Disk" #: harddrake/data.pm:90 install_any.pm:1507 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:100 #, c-format msgid "CD/DVD burners" msgstr "Pembakar CD/DVD" #: harddrake/data.pm:110 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:120 standalone/drakbackup:2051 #, c-format msgid "Tape" msgstr "Tape" #: harddrake/data.pm:129 #, c-format msgid "Videocard" msgstr "Kartu Video" #: harddrake/data.pm:139 #, c-format msgid "Tvcard" msgstr "Kartu TV" #: harddrake/data.pm:148 #, c-format msgid "Other MultiMedia devices" msgstr "Divais MultiMedia Lain" #: harddrake/data.pm:157 #, c-format msgid "Soundcard" msgstr "Kartu Suara" #: harddrake/data.pm:166 #, c-format msgid "Webcam" msgstr "Webcam" #: harddrake/data.pm:180 #, c-format msgid "Processors" msgstr "Prosesor" #: harddrake/data.pm:190 #, c-format msgid "ISDN adapters" msgstr "Adapter ISDN" #: harddrake/data.pm:200 #, c-format msgid "Ethernetcard" msgstr "Kartu Ethernet" #: harddrake/data.pm:218 network/netconnect.pm:518 #, c-format msgid "Modem" msgstr "Modem" #: harddrake/data.pm:228 #, c-format msgid "ADSL adapters" msgstr "Adapter ADSL" #: harddrake/data.pm:242 #, c-format msgid "Memory" msgstr "Memori" #: harddrake/data.pm:251 #, c-format msgid "AGP controllers" msgstr "Pengontrol AGP" #: harddrake/data.pm:260 help.pm:186 help.pm:855 #: install_steps_interactive.pm:978 #, c-format msgid "Printer" msgstr "Printer" #: harddrake/data.pm:270 #, c-format msgid "Joystick" msgstr "Joystick" #: harddrake/data.pm:280 #, c-format msgid "(E)IDE/ATA controllers" msgstr "Pengontrol (E)IDE/ATA" #: harddrake/data.pm:289 #, c-format msgid "SATA controllers" msgstr "Pengontrol SATA" #: harddrake/data.pm:298 #, c-format msgid "Firewire controllers" msgstr "Pengontrol Firewire" #: harddrake/data.pm:307 #, c-format msgid "PCMCIA controllers" msgstr "Pengontrol PCMCIA" #: harddrake/data.pm:316 #, c-format msgid "SCSI controllers" msgstr "Pengontrol SCSI" #: harddrake/data.pm:325 #, c-format msgid "USB controllers" msgstr "Pengontrol USB" #: harddrake/data.pm:334 #, c-format msgid "USB ports" msgstr "port USB" #: harddrake/data.pm:343 #, c-format msgid "SMBus controllers" msgstr "Pengontrol SMBus" #: harddrake/data.pm:352 #, c-format msgid "Bridges and system controllers" msgstr "Pengontrol sistem dan bridge" #: harddrake/data.pm:361 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118 #: install_steps_interactive.pm:938 standalone/keyboarddrake:28 #, c-format msgid "Keyboard" msgstr "Keyboard" #: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971 #, c-format msgid "Mouse" msgstr "Mouse" #: harddrake/data.pm:397 #, c-format msgid "Scanner" msgstr "Scanner" #: harddrake/data.pm:407 standalone/harddrake2:439 #, c-format msgid "Unknown/Others" msgstr "Tak dikenal/Lain-lain" #: harddrake/data.pm:435 #, c-format msgid "cpu # " msgstr "cpu # " #: harddrake/sound.pm:191 standalone/drakconnect:169 #: standalone/drakconnect:615 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Harap tunggu... Menerapkan konfigurasi" #: harddrake/sound.pm:227 #, c-format msgid "No alternative driver" msgstr "Tidak ada driver alternatif" #: harddrake/sound.pm:228 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Tidak ada driver OSS/ALSA alternatif yang diketahui untuk kartu suara Anda (%" "s) yang kini menggunakan \"%s\"" #: harddrake/sound.pm:234 #, c-format msgid "Sound configuration" msgstr "Konfigurasi suara" #: harddrake/sound.pm:236 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Di sini Anda dapat dipilih driver alternatif (OSS atau ALSA) untuk kartu " "suara Anda (%s)" #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:241 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Kartu Anda kini memakai driver %s\"%s\" (driver standar kartu Anda adalah \"%" "s\")" #: harddrake/sound.pm:243 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) adalah API suara pertama, tidak tergantung OS " "(tersedia di hampir semua sistem unix) tapi amat primitif dan terbatas.\n" "\n" "ALSA (Advanced Linux Sound Architecture) adalah arsitektur modular yang\n" "mendukung banyak kartu ISA, USB dan PCI.\n" "\n" "Ia juga menyediakan API lebih baik daripada OSS.\n" "\n" "Utk menggunakan alsa, pakailah:\n" "- api OSS kompatibel lama, atau\n" "- api ALSA baru yg menyediakan banyak fitur canggih tapi memerlukan library " "ALSA.\n" #: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146 #, c-format msgid "Driver:" msgstr "Driver:" #: harddrake/sound.pm:262 #, c-format msgid "Trouble shooting" msgstr "Trouble shooting" #: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039 #: network/netconnect.pm:504 printer/printerdrake.pm:1142 #: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228 #: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341 #: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684 #: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643 #: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092 #: printer/printerdrake.pm:5183 standalone/drakTermServ:325 #: standalone/drakTermServ:1111 standalone/drakTermServ:1172 #: standalone/drakTermServ:1821 standalone/drakbackup:510 #: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224 #: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27 #: standalone/scannerdrake:51 standalone/scannerdrake:940 #, c-format msgid "Warning" msgstr "Peringatan" #: harddrake/sound.pm:270 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "Driver \"%s\" lama di-blacklist.\n" "\n" "Ia merusak kernel saat proses unload.\n" "\n" "Driver baru \"%s\" akan digunakan pada boot berikut." #: harddrake/sound.pm:278 #, c-format msgid "No open source driver" msgstr "Tidak ada driver open source" #: harddrake/sound.pm:279 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Tidak ada driver gratis untuk kartu suara Anda (%s), tapi ada driver " "proprietary yang cocok pada \"%s\"" #: harddrake/sound.pm:282 #, c-format msgid "No known driver" msgstr "Tidak ada driver yg diketahui" #: harddrake/sound.pm:283 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Tidak ada driver yang diketahui untuk kartu suara Anda (%s)" #: harddrake/sound.pm:287 #, c-format msgid "Unknown driver" msgstr "Driver tak dikenal" #: harddrake/sound.pm:288 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Kesalahan: driver \"%s\" untuk kartu suara Anda tidak terdaftar" #: harddrake/sound.pm:302 #, c-format msgid "Sound trouble shooting" msgstr "Pemecahan masalah suara" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:305 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Penguji suara klasik akan menjalankan perintah berikut:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" akan memberitahu Anda driver mana yang\n" "dipakai oleh kartu Anda secara default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" memberitahu driver apa yang dipakai\n" "sekarang\n" "\n" "- \"/sbin/lsmod\" menguji apakah modul (driver) dimuat atau tidak\n" "\n" "- \"/sbin/chkconfig --list sound\" dan \"/sbin/chkconfig --list alsa\" akan\n" "memberitahu Anda apakah layanan suara dan alsa terkonfigurasi untuk " "dijalankan\n" "pada initlevel 3\n" "\n" "- \"aumix -q\" memberitahu apakah volume suara dipadamkan atau tidak\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" akan memberitahu program mana yang memakai\n" "kartu suara.\n" #: harddrake/sound.pm:331 #, c-format msgid "Let me pick any driver" msgstr "Akan diambil sembarang driver" #: harddrake/sound.pm:334 #, c-format msgid "Choosing an arbitrary driver" msgstr "Pilih sembarang driver" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:337 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Jika Anda tahu pasti driver yg cocok untuk kartu Anda ambillah salah satu\n" "dari daftar di atas.\n" "\n" "Driver kartu suara \"%s\" Anda kini adalah \"%s\"" #: harddrake/v4l.pm:14 #, c-format msgid "Auto-detect" msgstr "Deteksi otomatis" #: harddrake/v4l.pm:72 harddrake/v4l.pm:235 #, c-format msgid "Unknown|Generic" msgstr "Tak dikenal|Generik" #: harddrake/v4l.pm:105 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Tak dikenal|CPH05X (bt878) [banyak pembuat]" #: harddrake/v4l.pm:106 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Tak dikenal|CPH06X (bt878) [banyak vendors]" #: harddrake/v4l.pm:309 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Pada kartu TV modern umumnya, modul bttv kernel GNU/Linux otomatis " "mendeteksi parameter yang benar.\n" "Jika kartu Anda tidak terdeteksi dengan benar, pilihlah tuner dan tipe kartu " "di sini. Pilih parameter kartu tv Anda jika perlu" #: harddrake/v4l.pm:312 #, c-format msgid "Card model:" msgstr "Model kartu :" #: harddrake/v4l.pm:313 #, c-format msgid "Tuner type:" msgstr "Tipe tuner :" #: harddrake/v4l.pm:314 #, c-format msgid "Number of capture buffers:" msgstr "Jumlah capture buffer :" #: harddrake/v4l.pm:314 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "Jumlah capture buffer untuk penangkapan mmap" #: harddrake/v4l.pm:316 #, c-format msgid "PLL setting:" msgstr "setting PLL :" #: harddrake/v4l.pm:317 #, c-format msgid "Radio support:" msgstr "Dukungan radio :" #: harddrake/v4l.pm:317 #, c-format msgid "enable radio support" msgstr "aktifkan dukungan radio" #: help.pm:11 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrakelinux distribution. If you agree with all the\n" "terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n" "button will reboot your computer." msgstr "" "Bacalah lisensi sebelum melanjutkan. Lisensi mencakup seluruh distribusi\n" "Mandrakelinux. Jika Anda setuju dengan semua pasal di dalamnya, klik\n" "kotak \"%s\". Jika tidak, klik pada tombol \"%s\" akan mereboot komputer " "Anda." #: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 standalone/drakautoinst:216 #, c-format msgid "Accept" msgstr "Terima" #: help.pm:17 #, c-format msgid "" "GNU/Linux is a multi-user system which means each user can have his or her\n" "own preferences, own files and so on. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be " "authorized\n" "to change anything except their own files and their own configurations,\n" "protecting the system from unintentional or malicious changes which could\n" "impact on the system as a whole. You'll have to create at least one regular\n" "user for yourself -- this is the account which you should use for routine,\n" "day-to-day usage. Although it's very easy to log in as \"root\" to do\n" "anything and everything, it may also be very dangerous! A very simple\n" "mistake could mean that your system will not work any more. If you make a\n" "serious mistake as a regular user, the worst that can happen is that you'll\n" "lose some information, but you will not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you type in this field and copy it to the \"%s\" one, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that's no reason to neglect it\n" "by making it blank or too simple: after all, your files could be the ones\n" "at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends, your father, your sister, etc. Click \"%s\" when you're\n" "finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you're finished adding users, you'll be asked to choose a user who\n" "will be automatically logged into the system when the computer boots up. If\n" "you're interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click on\n" "\"%s\". If you're not interested in this feature, uncheck the \"%s\" box." msgstr "" "GNU/Linux adalah sistem multiuser, artinya tiap pengguna bisa punya " "kesukaan,\n" "file sendiri. Tidak seperti \"root\", sang administrator, pengguna di sini " "tidak berhak\n" "mengubah apapun kecuali konfigurasi dan file mereka sendiri, menjaga sistem " "dari perubahan\n" "yang dapat merusak sistem secara keseluruhan. Anda harus membuat setidaknya " "satu pengguna \n" "reguler untuk Anda sendiri. Account ini Anda pakai untuk rutinitas. Meski " "Anda dapat login \n" "sebagai \"root\" untuk melakukan apa saja, tapi itu amat berbahaya! " "Kesalahan terkecil dapat \n" "menyebabkan sistem Anda tidak bekerja selamanya. Meski Anda melakukan " "kesalahan serius sebagai \n" "pengguna normal, Anda hanya akan kehilangan sebagian informasi, tidak " "seluruh sistem.\n" "\n" "Pertama, Anda harus mengisi nama. Ini tidak wajib, tentu saja - Anda dapat\n" "mengisinya sesuka Anda. DrakX akan mengambil kata pertama yang Anda " "masukkan\n" "pada kotak dan menyalinnya pada \"%s\" sebagai nama yang harus diketikkan " "pengguan untuk login ke sistem. \n" "Anda dapat mengubahnya. Lalu Anda harus mengisi katasandi. Katasandi " "pengguna \n" "biasa tidak sepenting katasandi \"root\" dari segi keamanan, tapi tidak " "ada \n" "alasan untuk mengabaikannya - file Anda bisa beresiko.\n" "\n" "Setelah Klik pada \"%s\", Anda dapat menambahkan pengguna untuk setiap " "rekan,\n" "ayah, atau saudara Anda. Klik \"%s\" ketika Anda telah selesai menambahkan " "pengguna.\n" "\n" "Klik pada tombol \"%s\" memungkinkan Anda mengubah \"shell\" standar untuk\n" "pengguna terkait (standar: bash).\n" "\n" "Ketika Anda selesai menambahkan pengguna, Anda akan ditanya untuk memilih " "pengguna yang \n" "dapat otomatis login saat komputer di-boot. Bila tertarik (dan tak begitu " "peduli\n" "dengan keamanan lokal), pilihlah pengguna dan manajer window-nya, lalu klik\n" "pada \"%s\". Jika tidak tertarik, jangan tandai kotak \"%s\"." #: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715 #, c-format msgid "User name" msgstr "Nama pengguna" #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233 #: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317 #: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581 #: standalone/drakTermServ:382 standalone/drakbackup:3946 #: standalone/drakbackup:4040 standalone/drakbackup:4057 #: standalone/drakbackup:4075 ugtk2.pm:506 #, c-format msgid "Next" msgstr "Selanjutnya" #: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 #: interactive.pm:385 #, c-format msgid "Advanced" msgstr "Tingkat mahir" #: help.pm:54 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Berikut adalah daftar partisi Linux yang terdeteksi pada hard drive Anda.\n" "Anda dapat memakai pilihan yg dibuatkan, karena itu baik untuk instalasi\n" "umum. Bila Anda mengubah pilihan, setidaknya Anda perlu mendefinisikan\n" "partisi root (\"/\"). Jangan pilih partisi yang terlalu kecil agar dapat\n" "menginstal software dengan leluasa. Bila Anda ingin menyimpan data pada " "partisi\n" "lain, Anda perlu membuat partisi \"/home\" (hanya mungkin jika punya lebih\n" "dari satu partisi Linux.)\n" "\n" "Tiap partisi terdaftar sebagai: \"Nama\", \"Kapasitas\".\n" "\n" "\"Nama\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n" "\"nomor partisi\" (misalnya \"hda1\").\n" "\n" "\"Tipe hard drive\" adalah \"hd\" untuk drive IDE dan \"sd\" untuk drive " "SCSI.\n" "\n" "\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Bila " "berupa IDE, maka:\n" "\n" " *\"a\" berarti \"hard drive master pada kontroller IDE primer\",\n" "\n" " *\"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n" "\n" " *\"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n" "\n" " *\"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n" "\n" "Pada drive SCSI, \"a\" adalah \"ID SCSI terkecil\", \"b\" adalah\"ID SCSI " "terkecil kedua\", dan seterusnya." #: help.pm:85 #, c-format msgid "" "The Mandrakelinux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the required one. If you do not have the requested\n" "CD at hand, just click on \"%s\", the corresponding packages will not be\n" "installed." msgstr "" "Instalasi Mandrakelinux didistribusikan pada beberapa CDROM. DrakX tahu jika " "paket\n" "terpilih berada di CDROM lain dan akan mengeluarkan CD yang ada untuk " "kemudian\n" "meminta Anda memasukkan CD yg diperlukan. Jika Anda tidak memiliki CD yang " "diperlukan,\n" "cukup klik pada \"%s\", maka paket tidak akan diinstal." #: help.pm:92 #, c-format msgid "" "It's now time to specify which programs you wish to install on your system.\n" "There are thousands of packages available for Mandrakelinux, and to make it\n" "simpler to manage, they have been placed into groups of similar\n" "applications.\n" "\n" "Mandrakelinux sorts package groups in four categories. You can mix and\n" "match applications from the various categories, so a ``Workstation''\n" "installation can still have applications from the ``Server'' category\n" "installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category. The special \"LSB\" group will\n" "configure your system so that it complies as much as possible with the\n" "Linux Standard Base specifications.\n" "\n" " Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n" "instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n" "of the system. However, if you do not select the \"LSB\" group you will\n" "still have a system which is nearly 100%% LSB-compliant.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group.\n" "\n" "You can check the \"%s\" box, which is useful if you're familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you start the installation in \"%s\" mode, you can deselect all groups\n" "and prevent the installation of any new packages. This is useful for\n" "repairing or updating an existing system.\n" "\n" "If you deselect all groups when performing a regular installation (as\n" "opposed to an upgrade), a dialog will pop up suggesting different options\n" "for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command-line interface. The total size of this installation is about 65\n" "megabytes." msgstr "" "Sekarang waktunya untuk menentukan program yang akan diinstal. Terdapat " "ribuan \n" "pada Mandrakelinux, dan untuk mempermudah, mereka telah diletakkan pada " "grup \n" "aplikasi yang sejenis.\n" "\n" "Mandrakelinux mengurutkan paket dalam empat kategori. Anda bisa " "menggabungkan \n" "menyesuaikan aplikasi dari berbagai kategori, sehingga installasi " "``Workstation''\n" "tetap dapat memiliki aplikasi pada installasi ``Server''\n" "\n" " * \"%s\": jika Anda ingin menggunakan komputer Anda sebagai workstation, " "pilih\n" "satu/lebih grup dalam kategori workstation.\n" "\n" " * \"%s\": jika komputer akan digunakan untuk pemrograman, pilih grup\n" "dari kategori itu. Grup khusus \"LSB\" akan mengkonfigurasi sistem\n" "agar sesuai dengan Spesifikasi Linux Standard Base sedekat mungkin.\n" "\n" " Memilih grup \"LSB\" juga akan menginstall seri kernel \"2.4\",\n" "dan bukan default \"2.6\". Hal ini untuk memastikan kesetaraan 100%% dengan " "LSB \n" "pada sistem. Namun, jika Anda tidak memilih grub \"LSB\" Anda akan \n" "tetap mendapatkan sistem yang hampir setara 100%% dengan LSB.\n" "\n" " * \"%s\": jika komputer diinginkan menjadi server, Anda dapat\n" "memilih layanan paling umum yang akan diinstal.\n" "\n" " * \"%s\": di sini Anda memilih lingkungan grafis. Minimal Anda\n" "harus pilih satu jika ingin punya workstation grafis!\n" "\n" "Untuk melihat penjelasan singkat, gerakkan kursor mouse ke atas nama grup.\n" "\n" "Anda bisa menandai kotak \"%s\", yang berguna jika Anda terbiasa dengan \n" "paket yang ditawarkan atau jika Anda ingin mempunyai kontrol penuh dari " "apa \n" "yang akan diinstall.\n" "\n" "Jika Anda memulai installasi dalam mode \"%s\", Anda bisa menghapus semua " "grup\n" "dan mencegah installasi paket baru. Hal ini berguna untuk memperbaiki atau \n" "mengupdate sistem yang sudah ada.\n" "\n" "Jika Anda tidak memilih semua grup ketika menjalankan installasi umum " "(sebagai\n" "kebalikan dari upgrade), sebuah dialog muncul untuk menawarkan opsi lain \n" "untuk installasi minimal:\n" "\n" " * \"%s\": menginstall paket seminimal mungkin untuk mendapatkan sebuah \n" "desktop grafis.\n" "\n" " * \"%s\": menginstall sistem dasar ditambah utilitas dasar dan juga \n" "dokumentasi. Installasi ini cocok untuk membuat sebuah server.\n" "\n" " * \"%s\": akan menginstall paket seminimal mungkin yang diperlukan \n" "untuk mendapatkan sistem Linux yang bekerja. Dengan installasi ini, Anda \n" "akan mendapatkan antarmuka perintah baris. Ukuran totalnya sekitar 65\n" "megabyte." #: help.pm:146 share/compssUsers.pl:23 #, c-format msgid "Workstation" msgstr "Workstation" #: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 #: share/compssUsers.pl:164 #, c-format msgid "Development" msgstr "Pengembangan" #: help.pm:146 share/compssUsers.pl:144 #, c-format msgid "Graphical Environment" msgstr "Mode Grafis" #: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642 #, c-format msgid "Individual package selection" msgstr "Pilih paket individu" #: help.pm:146 help.pm:588 #, c-format msgid "Upgrade" msgstr "Upgrade" #: help.pm:146 install_steps_interactive.pm:600 #, c-format msgid "With X" msgstr "Dengan X" #: help.pm:146 #, c-format msgid "With basic documentation" msgstr "Dengan dokumentasi dasar" #: help.pm:146 #, c-format msgid "Truly minimal install" msgstr "Instalasi paling minimal" #: help.pm:149 #, c-format msgid "" "If you choose to install packages individually, the installer will present\n" "a tree containing all packages classified by groups and subgroups. While\n" "browsing the tree, you can select entire groups, subgroups, or individual\n" "packages.\n" "\n" "Whenever you select a package on the tree, a description will appear on the\n" "right to let you know the purpose of that package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you'll be asked to confirm that you really want those servers to be\n" "installed. By default Mandrakelinux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that\n" "security holes were discovered after this version of Mandrakelinux was\n" "finalized. If you do not know what a particular service is supposed to do " "or\n" "why it's being installed, then click \"%s\". Clicking \"%s\" will install\n" "the listed services and they will be started automatically at boot time. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages depend on others and the installation of\n" "one particular package may require the installation of another package. The\n" "installer can determine which packages are required to satisfy a dependency\n" "to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert the floppy disk created at the end of\n" "another installation. See the second tip of the last step on how to create\n" "such a floppy." msgstr "" "Jika Anda memilih paket sendiri, installer akan menampilkan sebuah pohon \n" "berisi seluruh paket yang diklasifikasikan oleh grup dan sub grup. Selama\n" "menjelajah pohon tersebut, Anda bisa memilih seluruh grup, sub grup, atau " "paket\n" "individu.\n" "\n" "Setiap kali Anda memilih paket dalam pohon, penjelasan muncul di sisi kanan\n" "sehingga Anda tahu tujuan dari paket tersebut.\n" "\n" "!! Jika paket server terpilih dengan sengaja atau karena merupakan bagian " "suatu\n" "grup besar, akan ada pertanyaan konfirmasi instalasi paket tersebut. Pada\n" "Mandrakelinux, secara default semua server terinstal dijalankan saat boot.\n" "Meski aman saat distribusi diluncurkan, ada kemungkinan lubang keamanan\n" "ditemukan setelah versi Mandrakelinux ini selesai. Jika Anda tidak tahu apa\n" "yang dilakukan oleh suatu layanan atau mengapa ia diinstal, klik \"%s\".\n" "Jika Anda menekan \"%s\" layanan terdaftar akan diinstal dan akan " "dijalankan\n" "secara otomatis. !!\n" "\n" "Opsi \"%s\" digunakan untuk mematikan dialog yang muncul tiap kali\n" "installer memilih suatu paket secara otomatis untuk menyelesaikan masalah\n" "ketergantungan. Beberapa paket tergantung pada yang lain dan installasi \n" "sebuah paket mungkin membutuhkan installasi paket lain. Installer bisa \n" "menentukan paket mana yang diperlukan untuk menyelesaikan ketergantungan\n" "dan menyelesaikan installasi.\n" "\n" "Ikon disket di bagian bawah memungkinkan Anda untuk memuat daftar paket \n" "yang diinstal pada installasi sebelumnya. Hal ini berguna jika Anda telah\n" "memiliki sejumlah komputer yang hendak Anda konfigurasi secara serupa. Meng-" "klik\n" "pada ikon ini akan meminta Anda memasukkan disket yang dibuat pada akhir \n" "instalasi lainnya. Lihat tip kedua di langkah terakhir untuk membuat " "floppy \n" "tersebut." #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792 #: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508 #: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255 #: ugtk2.pm:899 wizards.pm:156 #, c-format msgid "No" msgstr "Tidak" #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149 #: modules/interactive.pm:71 printer/printerdrake.pm:736 #: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288 #: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 #: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899 #: wizards.pm:156 #, c-format msgid "Yes" msgstr "Ya" #: help.pm:180 #, c-format msgid "Automatic dependencies" msgstr "Ketergantungan otomatis" #: help.pm:183 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to set up a new printer. The interface presented in our\n" "manual is similar to the one used during installation." msgstr "" "\"%s\": meng-klik pada \"%s\" untuk membuka konfigurator printer. Baca\n" "bab yg bersangkutan di ``Pedoman Pemula'' untuk informasi lebih lanjut " "tentang\n" "cara setup printer baru. Antarmuka yang ditampilkan di sana sama dengan " "yang \n" "yang dipakai saat instalasi." #: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607 #: standalone/drakbackup:2333 standalone/drakbackup:2337 #: standalone/drakbackup:2341 standalone/drakbackup:2345 #, c-format msgid "Configure" msgstr "Konfigurasikan" #: help.pm:189 #, c-format msgid "" "This dialog is used to select which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all services available on the current installation. Review\n" "each one of them carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you're not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you probably do not want to start any services which you do not " "need.\n" "Please remember that some services can be dangerous if they're enabled on a\n" "server. In general, select only those services you really need. !!" msgstr "" "Dialog ini digunakan untuk memilih layanan yang Anda jalankan saat boot.\n" "\n" "DrakX akan menampilkan semua layanan yang tersedia pada instalasi ini. " "Periksa \n" "dengan baik dan jangan tandai layanan yang tidak diperlukan saat boot.\n" "\n" "Penjelasan singkat tentang layanan akan ditampilkan ketika suatu layanan " "dipilih. \n" "Namun jika Anda tak yakin kegunaan layanan tersebut, lebih aman menggunakan " "default.\n" "\n" "Pada tahap ini, hati-hati jika Anda bermaksud menjadikan komputer Anda " "sebuah\n" "server: Anda mungkin tidak ingin menjalankan layanan yang tidak diperlukan. " "Ingat,\n" "beberapa layanan bisa berbahaya jika dijalankan. Secara umum, pilihlah " "hanya\n" "layanan yang benar-benar Anda perlukan." #: help.pm:206 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system.\n" "\n" "The \"%s\" option will automatically regulate the system clock by\n" "connecting to a remote time server on the Internet. For this feature to\n" "work, you must have a working Internet connection. We recommend that you\n" "choose a time server located near you. This option actually installs a time\n" "server which can be used by other machines on your local network as well." msgstr "" "GNU/Linux mengatur waktu dalam GMT (Greenwich Mean Time) dan " "menerjemahkannya\n" "ke waktu lokal sesuai zona waktu yang Anda pilih. Jika waktu pada " "motherboard\n" "Anda diset ke waktu lokal, Anda bisa menonaktifkannya dengan tidak memilih\n" "\"%s\" yang akan mengijinkan GNU/Linux mengetahui bahwa waktu sisten dan " "waktu\n" "perangkat keras berada dalam zona waktu yang sama. Hal ini berguna ketika " "komputer\n" "juga menggunakan sistem operasi lain.\n" "\n" "Opsi \"%s\" akan otomatis mengatur jam dengan menghubungi server waktu " "remote di \n" "internet. Agar fitur ini bekerja, Anda harus memiliki koneksi Internet. " "Kami\n" "merekomendasikan Anda memilih server terdekat. Opsi ini sebenarnya " "menginstall \n" "server waktu yang dapat digunakan oleh komputer lain pada jaringan lokal " "Anda." #: help.pm:217 install_steps_interactive.pm:873 #, c-format msgid "Hardware clock set to GMT" msgstr "Jam perangkat keras diset ke GMT" #: help.pm:217 #, c-format msgid "Automatic time synchronization" msgstr "Sinkronisasi waktu otomatis" #: help.pm:220 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs." msgstr "" "Kartu Grafik\n" "\n" " Installer akan mendeteksi dan mengkonfigurasi kartu grafis yang " "terinstall \n" "secara otomatis pada komputer Anda. Jika tidak benar, pilih kartu yang " "sesuai pada\n" "daftar ini.\n" "\n" " Pada situasi dimana beberapa server tersedia untuk kartu Anda, dengan " "atau tanpa\n" "akselerasi 3D, Anda akan ditanya mana yang paling sesuai dengan kebutuhan " "Anda." #: help.pm:231 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n" "\n" "You'll see a list of different parameters to change to get an optimal\n" "graphical display.\n" "\n" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If this is not correct, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you're asked to choose the server which\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " The system will try to open a graphical screen at the desired\n" "resolution. If you see the test message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you do not see it, then it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds and return you to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "X (untuk X Window System) adalah jantung dari interface grafis GNU/Linux\n" "yang diperlukan oleh semua lingkungan grafis (KDE, GNOME, AfterStep,\n" "WindowMaker, dll.) yang dibundel pada Mandrakelinux.\n" "\n" "Anda akan melihat daftar parameter yang berbeda untuk merubah untuk " "mendapatkan\n" "tampilan grafis yang optimal.\n" "\n" "Kartu Grafis\n" "\n" " Installer akan secara otomatis mendeteksi dan mengkonfigurasi kartu \n" "grafik yang terinstall pada komputer Anda. Jika tidak benar, Anda bisa " "memilih\n" "dari daftar kartu grafik yang terinstall pada komputer Anda.\n" "\n" " Pada situasi dimana beberapa server tersedia untuk kartu Anda, dengan " "atau tanpa\n" "akselerasi 3D, Anda akan ditanya mana yang paling sesuai dengan kebutuhan " "Anda.\n" "\n" "\n" "\n" "Monitor\n" "\n" " Biasanya, installer akan secara otomatis mendeteksi dan mengkonfigurasi \n" "monitor yang terhubung ke komputer Anda. Jika tidak benar, Anda bisa " "memilih\n" "dari daftar monitor yang terhubung ke komputer Anda.\n" "\n" "\n" "\n" "Resolusi\n" "\n" " Disini Anda bisa memilih resolusi dan kedalaman warna yang tersedia " "untuk\n" "perangkat keras grafis Anda. Pilih yang memenuhi kebutuhan Anda (Anda bisa \n" "merubahnya setelah installasi). Contoh dari konfigurasi terpilih " "ditampilkan\n" "pada gambar monitor.\n" "\n" "\n" "\n" "Pengujian\n" "\n" " Bergantung pada perangkat keras Anda, entry ini mungkin tidak muncul.\n" "\n" " Sistem akan mencoba membuka layar grafis pada resolusi yang diinginkan.\n" "Jika Anda melihat pesan pengujian selama tes dan menjawab \"%s\",\n" "maka DrakX akan melanjutkan ke langkah selanjutnya. Jika Anda tidak " "melihatnya,\n" "maka berarti beberapa bagian dari konfigurasi deteksi otomatis salah dan\n" "pengujian akan berakhir setelah 12 detik dan kembali ke menu. Ubahlah\n" "setting sehingga Anda mendapatkan tampilan grafis yang benar.\n" "\n" "\n" "\n" "Opsi\n" "\n" " Langkah ini mengijinkan Anda untuk memilih apakah komputer Anda hendak " "berpindah\n" "ke antarmuka grafis secara otomatis saat boot.Biasanya Anda harus melihat \n" "\"%s\" jika komputer Anda bertindak sebagai server, atau jika Anda adalah\n" "tidak berhasil mendapatkan konfigurasi tampilan." #: help.pm:288 #, c-format msgid "" "Monitor\n" "\n" " Normally the installer will automatically detect and configure the\n" "monitor connected to your machine. If it is not correct, you can choose\n" "from this list the monitor which is connected to your computer." msgstr "" "Monitor\n" "\n" " Biasanya, installer akan secara otomatis mendeteksi dan mengkonfigurasi \n" "monitor yang terhubung ke komputer Anda. Jika tidak benar, Anda bisa " "memilih\n" "dari daftar monitor yang terhubung ke komputer Anda." #: help.pm:295 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "graphics hardware. Choose the one which best suits your needs (you will be\n" "able to make changes after the installation). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Resolusi\n" "\n" " Disini Anda bisa memilih resolusi dan kedalaman warna yang tersedia " "untuk\n" "perangkat keras grafis Anda. Pilih yang memenuhi kebutuhan Anda (Anda bisa \n" "merubahnya setelah installasi). Contoh dari konfigurasi terpilih " "ditampilkan\n" "pada gambar monitor." #: help.pm:303 #, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you're asked to choose the server which best\n" "suits your needs." msgstr "" "Pada situasi dimana beberapa server tersedia untuk kartu Anda, dengan atau " "tanpa\n" "akselerasi 3D, Anda akan ditanya mana yang paling sesuai dengan kebutuhan " "Anda." #: help.pm:308 #, c-format msgid "" "Options\n" "\n" " This steps allows you to choose whether you want your machine to\n" "automatically switch to a graphical interface at boot. Obviously, you may\n" "want to check \"%s\" if your machine is to act as a server, or if you were\n" "not successful in getting the display configured." msgstr "" "Opsi\n" "\n" " Langkah ini mengijinkan Anda untuk memilih apakah komputer Anda hendak " "berpindah\n" "ke antarmuka grafis secara otomatis saat boot.Biasanya Anda harus melihat \n" "\"%s\" jika komputer Anda bertindak sebagai server, atau jika Anda adalah\n" "tidak berhasil mendapatkan konfigurasi tampilan." #: help.pm:316 #, c-format msgid "" "You now need to decide where you want to install the Mandrakelinux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space you will have to\n" "partition the drive. Basically, partitioning a hard drive means to\n" "logically divide it to create the space needed to install your new\n" "Mandrakelinux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to data losses, partitioning can be intimidating and stressful\n" "for the inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on the configuration of your hard drive, several options are\n" "available:\n" "\n" " * \"%s\". This option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\". The wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you've previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended. Using this option is\n" "recommended if you want to use both Mandrakelinux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than when you started. You'll have less free space under Microsoft Windows\n" "to store your data or to install new software.\n" "\n" " * \"%s\". If you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrakelinux system, choose\n" "this option. Be careful, because you will not be able to undo this " "operation\n" "after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\". This option appears when the hard drive is entirely taken by\n" "Microsoft Windows. Choosing this option will simply erase everything on the\n" "drive and begin fresh, partitioning everything from scratch.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\". Choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "Sekarang Anda harus menentukan dimana Anda hendak menginstall sistem " "operasi\n" "Mandrakelinux pada harddisk Anda. Jika harddisk Anda kosong atau jika " "sebuah\n" "sistem operasi menggunakan semua tempat, Anda harus mempartisi drive.\n" "Pada dasarnya, mempartisi harddisk berarti membaginya secara logical\n" "untuk membuat ruang yang diperlukan sistem Mandrakelinux baru Anda.\n" "\n" "Karena proses partisi harddisk biasanya tidak bisa dikembalikan dan bisa \n" "mengacu pada kehilangan data, partisi bisa menegangkan dan membuat stress\n" "bagi pengguna yang tidak terbiasa. Untungnya, DrakX menyertakan wizard yang\n" "mempermudah proses ini. Sebelum melanjutkan, baca sisa bagian ini dan " "diatas,\n" "santai saja.\n" "\n" "Bergantung pada konfigurasi pada harddisk Anda, beberapa opsi yang " "tersedia:\n" "\n" " * \"%s\". Opsi ini akan melakukan partisi otomatis dari drive kosong Anda.\n" "Jika Anda menggunakan opsi ini tidak ada konfirmasi tambahan.\n" "\n" " * \"%s\". Wizard mendeteksi satu atau lebih partisi Linux pada harddisk " "Anda.\n" "Jika Anda hendak menggunakannya, pilih opsi ini. Anda akan ditanya untuk " "memilih\n" "titik mount yang sesuai untuk setiap partisi.\n" "Titik mount yang benar telah dipilih secara default, dan untuk sebagian " "besar\n" "kasus, merupakan ide bagus untuk menggunakannya.\n" "\n" " * \"%s\". Jika Microsoft Windows terinstall pada harddisk Anda dan " "menggunakan \n" "semua ruang yang tersedia, Anda harus membuat sebuah ruang kosong untuk GNU/" "Linux. \n" "Untuk melakukannya, Anda bisa menghapus partisi data Microsoft Windows " "Anda \n" "(lihat solusi ``Menghapus seluruh disk'') atau merubah ukuran partisi FAT " "atau NTFS \n" "Microsoft Windows Anda. Merubah ukuran dapat dilakukan tanpa kehilangan " "data,\n" "dengan sebelumnya Anda sudah mendefrag partisi Windows.\n" "Membackup data sangat disarankan. Penggunaan opsi ini sangat " "direkomendasikan jika Anda\n" "ingin menggunakan Mandrakelinux dan Microsoft Windows pada komputer yang " "sama.\n" "\n" " Sebelum memilih opsi ini, harap dipahami bahwa setelah prosedur ini, " "ukuran partisi \n" "Microsoft Windows Anda akan berkurang sebelum memulai prosedur. Anda akan " "memiliki \n" "ruang yang lebih sedikit pada Microsoft Windows untuk menyimpan data atau " "menginstall\n" "perangkat lunak baru.\n" "\n" " * \"%s\". Jika Anda hendak menghapus seluruh data dan semua partisi yang " "ada pada harddisk\n" "Anda dan menggantinya dengan sistem Mandrakelinux yang baru, pilih opsi ini. " "Hati-hati, karena\n" "Anda tidak bisa membatalkan opsi ini setelah Anda mengkonfirmasikan.\n" "\n" " !! Jika Anda memilih opsi ini, semua data pada harddisk Anda akan " "dihapus !!\n" "\n" " * \"%s\". Opsi ini tampak ketika harddisk dipakai seluruhnya oleh Microsoft " "Windows.\n" "Memilih opsi ini akan menghapus semua pada harddisk dan memulai installasi " "dan partisi dari awal.\n" "\n" " !! Jika Anda memilih opsi ini, semua data Anda akan hilang. !!\n" "\n" " * \"%s\". Pilihlah opsi ini jika Anda mempartisi harddisk Anda secara " "manual. Hati-hati \n" "-- ini sangatlah handal tetapi pilihan yang berbahaya dan Anda bisa " "kehilangan data dengan\n" "mudah. Itu sebabnya opsi ini hanya direkomendasikan jika Anda telah " "melakukan hal ini sebelumnya\n" "atau berpengalaman. Untuk instruksi lebih lanjut bagaimana menggunakan " "utilitas DiskDrake,\n" "silahkan lihat bagian ``Mengelola Partisi Anda'' pada ``Panduan Pemula''." #: help.pm:374 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Gunakan ruang kosong" #: help.pm:374 #, c-format msgid "Use existing partition" msgstr "Gunakan partisi yang sudah ada" #: help.pm:374 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Gunakan ruang kosong pada partisi windows" #: help.pm:374 install_interactive.pm:213 #, c-format msgid "Erase entire disk" msgstr "Hapus seluruh disk" #: help.pm:374 #, c-format msgid "Remove Windows" msgstr "Hapus Windows" #: help.pm:374 install_interactive.pm:228 #, c-format msgid "Custom disk partitioning" msgstr "Lakukan partisi disk secara custom" #: help.pm:377 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n" "to remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "boot-loader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": enables you to create an installation floppy disk which will\n" "automatically perform a whole installation without the help of an operator,\n" "similar to the installation you've just configured.\n" "\n" " Note that two different options are available after clicking on that\n" "button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing on a number of similar\n" "machines. See the Auto install section on our web site for more\n" "information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key, type >>linux\n" "defcfg=\"floppy\"<< and press the [Enter] key.\n" "\n" "(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n" "\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n" "/dev/fd0\"." msgstr "" "Instalasi kini selesai dan sistem GNU/Linux Anda siap dipakai. Klik\n" "\"%s\" untuk reboot. Jangan lupa untuk mengambil media installasi (CD-ROM " "atau disket).\n" "Hal pertama yang Anda lihat setelah pengujian perangkat keras adalah menu " "bootloader,\n" "di sana Anda dapat memilih sistem operasi yang akan dijalankan.\n" "\n" "Tombol \"%s\" menampilkan 2 tombol tambahan untuk:\n" "\n" " * \"%s\": memungkinkan Anda untuk membuat disket instalasi yang akan " "secara \n" "otomatis melakukan instalasi tanpa bantuan operator, serupa dengan instalasi " "yang \n" "baru Anda konfigurasikan.\n" "\n" " Perhatikan bahwa dua operasi yang berbeda muncul setelah menekan tombol " "tersebut:\n" "\n" " * \"%s\". Instalasi semi-otomatis, hanya proses partisi yang tetap\n" "interaktif.\n" "\n" " * \"%s\". Instalasi otomatis penuh: harddisk ditulis ulang\n" "seluruhnya, semua data hilang.\n" "\n" " Fitur ini amat praktis untuk instalasi banyak komputer dengan spesifikasi " "sama.\n" "Lihat bagian Auto install di situs web kami untuk informasi lebih lanjut.\n" "\n" " * \"%s\"(*): simpan daftar paket terpilih pada installasi ini.\n" "Untuk menggunakan pilihan ini pada installasi lain, masukkan disket dan \n" "mulailah installasi. Saat prompt, tekan [F1] lalu ketik >>linux \n" "defcfg=\"floppy\"<< dan tekan [Enter].\n" "\n" "(*) Anda perlu floppy berformat FAT. Untuk membuatnya di GNU/Linux, " "jalankan\n" "\"mformat a:\", atau \"fdformat /dev/fd0\" diikuti dengan \"mkfs.vfat /dev/" "fd0\"." #: help.pm:409 #, c-format msgid "Generate auto-install floppy" msgstr "Buat disket instalasi otomatis" #: help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Replay" msgstr "Ulang" #: help.pm:409 install_steps_interactive.pm:1328 #, c-format msgid "Automated" msgstr "Otomatis" #: help.pm:409 install_steps_interactive.pm:1331 #, c-format msgid "Save packages selection" msgstr "Simpan pilihan paket" #: help.pm:412 #, c-format msgid "" "If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n" "reformat some of them and erase any data they contain. To do so, please\n" "select those partitions as well.\n" "\n" "Please note that it's not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to " "reformat\n" "partitions containing data that you wish to keep (typically \"/home\").\n" "\n" "Please be careful when selecting partitions. After the formatting is\n" "completed, all data on the selected partitions will be deleted and you\n" "will not be able to recover it.\n" "\n" "Click on \"%s\" when you're ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrakelinux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions which will be checked for\n" "bad blocks on the disk." msgstr "" "Jika Anda memilih untuk menggunakan beberapa partisi GNU/Linux, Anda\n" "mungkin akan memformat dan menghapus data. Untuk melakukannya\n" "pilih juga partisi tersebut.\n" "\n" "Perhatikan bahwa format ulang semua partisi tidak diperlukan.\n" "Anda harus memformat ulang partisi yang berisi sistem operasi\n" "(seperti \"/\", \"/usr\" atau \"/var\") tetapi Anda tidak harus " "memformat ulang\n" "partisi berisi data yang akan Anda simpan (biasanya \"/home\").\n" "\n" "Harap berhati-hati ketika memilih partisi. Setelah format selesai\n" ", semua data pada partisi akan dihapus dan Anda tidak akan bisa\n" "mengembalikannya kembali.\n" "\n" "Klik pada \"%s\" ketika Anda siap memformat partisi.\n" "\n" "Klik pada \"%s\" jika Anda hendak memilih partisi lain untuk \n" "installasi sistem operasi Mandrakelinux baru Anda.\n" "\n" "Klik pada \"%s\" jika Anda hendak memilih partisi yang hendak \n" "diperiksa untuk block rusak pada disk." #: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425 #: interactive/newt.pm:316 printer/printerdrake.pm:3579 #: standalone/drakTermServ:361 standalone/drakbackup:3906 #: standalone/drakbackup:3945 standalone/drakbackup:4056 #: standalone/drakbackup:4071 ugtk2.pm:504 #, c-format msgid "Previous" msgstr "Sebelumnya" #: help.pm:434 #, c-format msgid "" "By the time you install Mandrakelinux, it's likely that some packages will\n" "have been updated since the initial release. Bugs may have been fixed,\n" "security issues resolved. To allow you to benefit from these updates,\n" "you're now able to download them from the Internet. Check \"%s\" if you\n" "have a working Internet connection, or \"%s\" if you prefer to install\n" "updated packages later.\n" "\n" "Choosing \"%s\" will display a list of web locations from which updates can\n" "be retrieved. You should choose one near to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" "Saat Mandrakelinux diinstal, mungkin beberapa paket telah diupdate sejak\n" "rilis awal. Beberapa kesalahan mungkin telah diperbaiki / masalah keamanan\n" "dipecahkan. Untuk memanfaatkan update ini Anda dapat men-download-nya dari\n" "Internet. Pilih \"%s\" jika Anda memiliki koneksi Internet, atau \"%s\" jika\n" "ingin mengupdate paket lain waktu.\n" "\n" "Memilih \"%s\" akan menampilkan daftar lokasi dimana update bisa didownload.\n" "Pilih yang terdekat. Daftar paket akan muncul: periksa pilihan Anda,\n" "tekan \"%s\" untuk mengambil/menginstall paket atau \"%s\" untuk membatalkan." #: help.pm:444 help.pm:588 install_steps_gtk.pm:387 #: install_steps_interactive.pm:156 standalone/drakbackup:4103 #, c-format msgid "Install" msgstr "Instal" #: help.pm:447 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level you desire\n" "for your machine. As a rule of thumb, the security level should be set\n" "higher if the machine is to contain crucial data, or if it's to be directly\n" "exposed to the Internet. The trade-off that a higher security level is\n" "generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, keep the default option. You'll be able\n" "to change it later with the draksec tool, which is part of Mandrakelinux\n" "Control Center.\n" "\n" "Fill the \"%s\" field with the e-mail address of the person responsible for\n" "security. Security messages will be sent to that address." msgstr "" "Saat ini, DrakX akan mengijinkan Anda memilih tingkat keamanan komputer.\n" "Sebagai acuan, tingkat keamanan harus semakin tinggi jika berisi data\n" "penting, atau langsung terhubung ke Internet. Level keamanan yang \n" "tinggi umumnya mengorbankan kemudahan pemakaian.\n" "\n" "Jika Anda tidak tahu apa yang akan dipilih, gunakan opsi default. Anda\n" "mampu mengubahnya menggunakan perkakas draksec, yang merupakan bagian\n" "dari dari Pusat Kontrol Mandrakelinux.\n" "\n" "Isi field \"%s\" dengan alamat email dari orang yang bertanggung jawab\n" "atas keaman. Pesan keamanan akan dikirimkan pada alamat tersebut." #: help.pm:458 #, c-format msgid "Security Administrator" msgstr "Administrator Keamanan" #: help.pm:461 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrakelinux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it does not always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Saat ini, Anda harus memilih partisi yang akan digunakan untuk installasi\n" "sistem Mandrakelinux Anda. Jika partisi telah didefinisikan, baik dari\n" "installasi GNU/Linux sebelumnya atau melalui perkakas partisi lainnya,\n" "Anda bisa menggunakan partisi yang ada. Jika tidak, partisi harddisk \n" "harus didefinisikan.\n" "\n" "Untuk membuat partisi, Anda harus memilih harddisk dahulu. Anda bisa \n" "memilih disk untuk dipartisi dengan memilih ``hda'' untuk drive IDE\n" "pertama, ``hdb'' untuk kedua, ``sda'' untuk drive SCSI pertama, dst.\n" "\n" "Untuk mempartisi drive terpilih, Anda bisa menggunakan opsi berikut:\n" "\n" " * \"%s\": opsi ini menghapus seluruh partisi pada drive terpilih\n" "\n" " * \"%s\": opsi ini memungkinkan Anda membuat partisi ext3 dan swap\n" "secara otomatis pada ruang kosong dari hard disk Anda.\n" "\n" "\"%s\": memberi akses pada fitur tambahan:\n" "\n" " * \"%s\": menyimpan tabel partisi pada disket. Berguna untuk proses\n" "pengembalian tabel partisi. Anda disarankan untuk melakukan langkah\n" "ini.\n" "\n" " * \"%s\": mengijinkan Anda mengembalikan tabel partisi yang tersimpan\n" "sebelumnya dari disket.\n" "\n" " * \"%s\": jika tabel partisi Anda rusak, Anda bisa mencoba untuk\n" "mengembalikannya menggunakan opsi ini. Harap hati-hati dan perlu\n" "diingat bahwa proses ini tidak selalu bekerja.\n" "\n" " * \"%s\": batalkan semua perubahan dan muat ulang tabel partisi\n" "orisinal pada hard disk.\n" "\n" " * \"%s\": tanpa opsi ini akan memaksa pengguna melakukan proses \n" "mount dan unmount manual pada media seperti disket dan CD-ROM.\n" "\n" " * \"%s\": gunakan opsi ini jika Anda hendak menggunakan wizard\n" "untuk mempartisi hard disk Anda. Opsi ini disarankan jika Anda\n" "tidak memahami cara mempartisi.\n" "\n" " * \"%s\": gunakan opsi ini untuk membatalkan perubahan Anda.\n" "\n" " * \"%s\": mengijinkan aksi tambahan pada partisi (jenis, opsi,\n" "format) dan memberikan informasi lebih tentang hard disk.\n" "\n" " * \"%s\": ketika selesai mempartisi, opsi ini akan menyimpan\n" "perubahan pada disk.\n" "\n" "Ketika mendefinisikan ukuran partisi, Anda bisa menggunakan tombol\n" "panah dari keyboard Anda.\n" "\n" "Catatan: Anda bisa mencapai sembarang opsi menggunakan keyboard.\n" "Navigasi pada partisi menggunakan [Tab] dan panah [Up/Down].\n" "\n" "Ketika partisi dipilih, Anda bisa menggunakan:\n" "\n" " * Ctrl-c untuk membuat partisi baru (ketika partisi kosong dipilih)\n" "\n" " * Ctrl-d untuk menghapus partisi\n" "\n" " * Ctrl-m untuk menentukan titik mount\n" "\n" "Untuk mendapatkan informasi tentang jenis sistem file yang ada, \n" "silahkan membaca bab ext2FS dari ``Referensi Manual''.\n" "\n" "Jika Anda menginstall pada komputer PPC, Anda harus membuat partisi\n" "``bootstrap'' HFS kecil paling tidak 1 MB yang akan digunakan oleh\n" "bootloader yaboot. Jika Anda membuatnya lebih besar, misalkan 50MB\n" "Anda bisa menyimpan kernel dan citra ramdisk untuk situasi darurat." #: help.pm:530 #, c-format msgid "Removable media auto-mounting" msgstr "Mount otomatis media lepas (removable)" #: help.pm:530 #, c-format msgid "Toggle between normal/expert mode" msgstr "Ubah ke modus normal/ahli" #: help.pm:533 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrakelinux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Terdapat lebih dari satu partisi Microsoft yang terdeteksi pada harddisk\n" "Anda. Pilih partisi yang hendak Anda ubah ukurannya untuk instalasi sistem\n" "operasi Linux Mandrake.\n" "\n" "Tiap partisi terdaftar sebagai: \"Nama Linux\",\"Nama windows\",\"Kapasitas\".\n" "\n" "\"Nama Linux\" berstruktur: \"tipe hard drive\", \"nomor hard drive\",\n" "\"nomor partisi\" (misalnya \"hda1\").\n" "\n" "\"Tipe hard drive\" adalah \"hd\" bila drive bertipe IDE dan \"sd\" jika\n" "berupa drive SCSI.\n" "\n" "\"Nomor Hard Drive\", selalu berupa huruf setelah \"hd\" atau \"sd\". Jika\n" "berupa IDE, maka:\n" "\n" " * \"a\" berarti \"hard drive master pada kontroller IDE primer\",\n" "\n" " * \"b\" berarti \"hard drive slave pada kontroler IDE primer\",\n" "\n" " * \"c\" berarti \"hard drive master pada kontroler IDE sekunder\",\n" "\n" " * \"d\" berarti \"hard drive slave pada kontroler IDE sekunder\",\n" "\n" "Pada drive SCSI, \"a\" berarti \"ID SCSI terkecil, \"b\" berarti \"ID SCSI\n" "terkecil kedua\", dst.\n" "\n" "\"Nama windows\" adalah huruf hard drive Anda pada Windows (disk pertama\n" "pada partisi disebut \"C:\")." #: help.pm:564 #, c-format msgid "" "\"%s\": check the current country selection. If you're not in this country,\n" "click on the \"%s\" button and choose another. If your country is not in " "the\n" "list shown, click on the \"%s\" button to get the complete country list." msgstr "" "\"%s\": periksa pilihan negara saat ini. Jika tidak berada di sini, klik\n" "\"%s\" dan pilih yang lain. Jika negara Anda tidak ada pada daftar,\n" "klik tombol \"%s\" untuk mendapatkan daftar lengkap." #: help.pm:569 #, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new installation or an\n" "upgrade of an existing Mandrakelinux system:\n" "\n" " * \"%s\". For the most part, this completely wipes out the old system.\n" "However, depending on your partitioning scheme, you can prevent some of\n" "your existing data (notably \"home\" directories) from being over-written.\n" "If you wish to change how your hard drives are partitioned, or to change\n" "the file system, you should use this option.\n" "\n" " * \"%s\". This installation class allows you to update the packages\n" "currently installed on your Mandrakelinux system. Your current partitioning\n" "scheme and user data will not be altered. Most of the other configuration\n" "steps remain available and are similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n" "running version \"8.1\" or later. Performing an upgrade on versions prior\n" "to Mandrakelinux version \"8.1\" is not recommended." msgstr "" "Tahap ini hanya aktif jika partisi GNU/Linux lama ditemukan.\n" "\n" "DrakX perlu tahu Anda ingin melakukan instalasi baru atau upgrade sistem\n" "Mandrakelinux yang sudah ada:\n" "\n" "* \"%s\": Untuk sebagian besar bagian, opsi ini menghapus sistem lama.\n" "Namun, bergantung pada skema partisi Anda, Anda bisa mencegah data Anda\n" "(biasanya direktori \"home\") untuk ditimpa. Jika Anda hendak mengubah\n" "bagaimana hard disk dipartisi, atau untuk mengubah sistem file, Anda\n" "harus menggunakan opsi ini.\n" "\n" "* \"%s\": Kelas installasi ini akan mengupdate paket yang terinstall\n" "pada sistem Mandrakelinux Anda. Skema partisi dan data pengguna Anda\n" "tidak akan diubah. Sebagian besar langkah konfigurasi yang tersisa\n" "serupa pada installasi standar.\n" "\n" "Menggunakan opsi ``Upgrade'' seharusnya berjalan pada Mandrakelinux\n" "versi \"8.1\" keatas. Melakukan upgrade pada versi sebelum \"8.1\"\n" "tidak dianjurkan." #: help.pm:591 #, c-format msgid "" "Depending on the language you chose (), DrakX will automatically select a\n" "particular type of keyboard configuration. Check that the selection suits\n" "you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard which corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be shown a list of supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding which will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "Bergantung pada bahasa yang Anda pilih (), DrakX akan memilih tipe\n" "keyboard yang sesuai. Periksa apakah pilihan sudah sesuai atau pilih\n" "layout keyboard yang lain.\n" "\n" "Juga, Anda mungkin tidak memiliki keyboard yang sesuai dengan bahasa\n" "Anda: misalnya jika Anda orang Swiss yang berbahasa Inggris, Anda\n" "mungkin memilih keyboard Swiss. Atau jika Anda berbahasa Inggris\n" "tapi tinggal di Quebec, Anda mungkin menghadapi situasi yang sama\n" "dengan bahasa Anda dan country-set keyboard tidak sesuai. Pada\n" "kedua kasus, langkah installasi ini akan mengijinkan Anda untuk\n" "memilih keyboard yang sesuai dari daftar.\n" "\n" "Klik tombol \"%s\" untuk menampilkan daftar keyboard yang didukung.\n" "\n" "Jika Anda memilih keyboard berbasis alphabet non-Latin, dialog\n" "selanjutnya memungkinkan Anda memilih kunci untuk berpindah keyboard\n" "antara layout Latin dan non-Latin." #: help.pm:609 #, c-format msgid "" "The first step is to choose your preferred language.\n" "\n" "Your choice of preferred language will affect the installer, the\n" "documentation, and the system in general. First select the region you're\n" "located in, then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if Spanish\n" "users are to use your machine, select English as the default language in\n" "the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. However full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrakelinux's use of UTF-8 will\n" "depend on the user's choices:\n" "\n" " * If you choose a language with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for use throughout the system at a\n" "user's request by selecting the \"%s\" option independently of which\n" "languages were been chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several, or even install them all by selecting the \"%s\" box.\n" "Selecting support for a language means translations, fonts, spell checkers,\n" "etc. will also be installed for that language.\n" "\n" "To switch between the various languages installed on your system, you can\n" "launch the \"localedrake\" command as \"root\" to change the language used\n" "by the entire system. Running the command as a regular user will only\n" "change the language settings for that particular user." msgstr "" "Langkah pertama adalah menentukan bahasa pilihan Anda.\n" "\n" "Pilihan bahasa Anda akan mempengaruhi installer, dokumentasi\n" "dan juga sistem secara umum. Pertama pilih wilayah Anda, lalu bahasa\n" "yang Anda gunakan.\n" "\n" "Klik pada tombol \"%s\" akan mengijinkan Anda memilih bahasa lain\n" "untuk diinstall pada workstation Anda, juga menginstall file bahasa\n" "khusus untuk dokumentasi sistem dan aplikasi. Misalnya jika pengguna\n" "Spanyol menggunakan komputer Anda, pilih Inggris sebagai bahasa default\n" "pada pohon view dan \"%s\" pada bagian Advanced.\n" "\n" "Tentang dukungan UTF-8 (unicode): Unicode adalah enkoding karakter yang\n" "baru yang ditujukan untuk mencakup seluruh bahasa yang ada. Namun \n" "dukungan penuh pada GNU/Linux sedang dalam pengembangan. Untuk alasan\n" "tersebut, penggunaan UTF-8 pada Mandrakelinux bergantung pada pilihan\n" "pengguna:\n" "\n" " * Jika Anda memilih menggunakan bahasa dengan enkoding yang kuat (bahasa\n" "latin, Rusia, Jepang, China, Korea, Thai, Yunani, Turki, sebagian besar\n" "bahasa iso-8859-2), enkoding akan digunakan secara default;\n" "\n" " * Bahasa lain akan menggunakan unicode sebagai default;\n" "\n" " * Jika dua atau lebih bahasa diperlukan, dan bahasa tersebut tidak\n" "memakai enkoding yang sama, maka unicode akan digunakan pada sistem;\n" "\n" " * Terakhir, unicode juga bisa dipaksa untuk digunakan melalui\n" "permintaan pengguna dengan memilih opsi \"%s\" secara terpisah\n" "pada bahasa yang dipilih.\n" "\n" "Perhatikan bahwa Anda tidak terbatas pada satu bahasa tambahan. Anda\n" "bisa memilih beberapa, atau semua dengan memilih kotak \"%s\".\n" "Memilih dukungan untuk sebuah bahasa berarti translasi, font, penguji\n" "ejaan, dll juga akan diinstal untuk bahasa tersebut.\n" "\n" "Untuk berpindah antar bahasa yang diinstall pada sistem, Anda bisa\n" "menjalankan perintah \"localedrake\" sebagai \"root\" untuk merubah\n" "bahasa yang digunakan sistem. Menjalankan perintah sebagai pengguna\n" "hanya akan merubah setting untuk pengguna tersebut." #: help.pm:647 #, c-format msgid "Espanol" msgstr "Spanyol" #: help.pm:650 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be obtained by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n" "mouse. DrakX will then configure your mouse so that you can simulate the\n" "wheel with it: to do so, press the middle button and move your mouse\n" "pointer up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "You can select the \"%s\" entry to chose a ``generic'' mouse type which\n" "will work with nearly all mice.\n" "\n" "If you choose a mouse other than the default one, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and\n" "you will be returned to the mouse list.\n" "\n" "Occasionally wheel mice are not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image will be displayed on-screen.\n" "Scroll the mouse wheel to ensure that it is activating correctly. As you\n" "scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n" "Test the buttons and check that the mouse pointer moves on-screen as you\n" "move your mouse about." msgstr "" "Umumnya, DrakX bisa mendeteksi jumlah tombol mouse Anda. Jika gagal,\n" "akan diasumsikan mouse Anda bertombol dua dan akan mengkonfigurasikan\n" "emulasi tombol ketiga. Tombol ketiga dari sebuah mouse bertombol dua\n" "bisa didapatkan dengan memilih tombol kanan dan kiri bersamaan. DrakX\n" "mengetahui mouse menggunakan antarmuka PS/2, serial atau USB secara\n" "otomatis." "\n" "Jika Anda memiliki mouse 3 tombol tanpa roda, Anda bisa memilih mouse\n" "\"%s\". DrakX akan mengkonfigurasi mouse Anda sehingga bisa ia bisa\n" "mensimulasikan roda: untuk melakukannya, tekan tombol tengah dan\n" "gerakkan pointer mouse Anda keatas dan kebawah.\n" "\n" "Jika Anda ingin menunjuk tipe mouse lain, pilih tipe yang sesuai dari\n" "daftar yang disediakan.\n" "\n" "Anda bisa memilih \"%s\" untuk memilih jenis mouse ``generik'' yang\n" "akan bekerja pada sebagian besar mouse.\n" "\n" "Jika Anda memilih mouse bukan standar, layar pengujian akan ditampilkan.\n" "Gunakan tombol dan roda untuk verifikasi setting. Jika mouse tidak \n" "bekerja baik tekan spasi atau [Enter] untuk membatalkan dan Anda akan\n" "kembali ke daftar mouse.\n" "\n" "Mouse dengan roda kadang tidak terdeteksi secara otomatis, sehingga Anda\n" "harus memilih mouse dari daftar. Pastikan memilih yang sesuai dengan port\n" "yang digunakan. Setelah memilih mouse dan menekan tombol \"%s\", sebuah\n" "citra mouse akan tampak di layar. Gerakkan rodanya untuk memastikan ia\n" "bekerja dengan baik. Ketika Anda menggerakan roda, Anda akan melihat roda\n" "pada layar juga bergerak. Ujilah tombol dan pastikan pointer mouse pada\n" "layar ikut bergerak." #: help.pm:681 #, c-format msgid "with Wheel emulation" msgstr "Dengan emulasi roda" #: help.pm:681 #, c-format msgid "Universal | Any PS/2 & USB mice" msgstr "Universal | Sembarang mouse PS/2 & USB" #: help.pm:684 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Pilih port yang benar. Misalnya \"COM1\" di Windows akan bernama\n" "\"ttyS0\" di GNU/Linux." #: help.pm:688 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you must enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That's why you must choose a password which is difficult to\n" "guess: DrakX will tell you if the password you chose is too simple. As you\n" "can see, you're not forced to enter a password, but we strongly advise\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise your system.\n" "\n" "One caveat: do not make the password too long or too complicated because " "you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it. To reduce the\n" "chance of a blind typing error you'll need to enter the password twice. If\n" "you do happen to make the same typing error twice, you'll have to use this\n" "``incorrect'' password the first time you'll try to connect as \"root\".\n" "\n" "If you want an authentication server to control access to your computer,\n" "click on the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, or if your\n" "computer will never be connected to the Internet and you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" "Ini adalah poin terpenting penentuan keamanan sistem GNU/Linux Anda: Anda\n" "harus mengisi katasandi \"root\". \"Root\" adalah administrator sistem dan\n" "yang berhak melakukan update, menambah pengguna, mengubah konfigurasi\n" "sistem. Singkatnya, \"root\" dapat melakukan apapun! Karena itu Anda\n" "harus memilih katasandi yang sulit ditebak - DrakX akan memberitahu jika\n" "terlalu mudah. Seperti Anda lihat, Anda tidak dipaksa untuk memasukkan\n" "katasandi, tapi sangat tidak dianjurkan. GNU/Linux juga rawan kesalahan\n" "operator seperti sistem operasi lain. Karena \"root\" bisa melewati\n" "semua batasan dan secara tidak sengaja menghapus semua data di partisi,\n" "sangatlah penting untuk memperketat usaha menjadi \"root\".\n" "\n" "Katasandi harus berupa campuran nomor dan huruf minimal 8 karakter. Jangan\n" "pernah mencatat katasandi \"root\" - itu membuat sistem mudah dibajak.\n" "\n" "Katasandi juga jangan terlalu panjang/rumit karena Anda harus mampu \n" "mengingatnya." "\n" "Katasandi tidak muncul di layar ketika diketikkan. Untuk mengurangi kesalahan\n" "pengetikkan Anda harus menuliskan katasandi sebanyak dua kali. Jika Anda\n" "melakukan kesalahan penulisan kasatandi sebanyak dua kali, Anda harus\n" "memakai katasandi yang ``salah'' ini untuk login sebagai \"root\".\n" "\n" "Jika Anda ingin sebuah server otentikasi mengontrol akses ke komputer Anda,\n" "klik pada tombol \"%s\".\n" "\n" "Jika jaringan Anda memakai protokol otentikasi LDAP/NIS/PDC Windows Domain,\n" "pilih yang cocok untuk \"%s\". Jika Anda tidak tahu yang harus digunakan,\n" "tanyalah admin jaringan Anda.\n" "\n" "Jika Anda mengalami masalah untuk mengingat katasandi, atau jika komputer\n" "Anda tidak akan terhubung ke Internet dan Anda mempercayai semua orang\n" "yang menggunakan komputer Anda, Anda bisa memilih \"%s\"." #: help.pm:722 #, c-format msgid "authentication" msgstr "otentikasi" #: help.pm:725 #, c-format msgid "" "A boot loader is a little program which is started by the computer at boot\n" "time. It's responsible for starting up the whole system. Normally, the boot\n" "loader installation is totally automated. DrakX will analyze the disk boot\n" "sector and act according to what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you'll be able to load either GNU/Linux or any other\n" "OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n" "\n" "If DrakX can not determine where to place the boot sector, it'll ask you\n" "where it should place it. Generally, the \"%s\" is the safest place.\n" "Choosing \"%s\" will not install any boot loader. Use this option only if " "you\n" "know what you're doing." msgstr "" "Bootloader adalah program kecil yang dijalankan ketika komputer boot. Ia\n" "bertanggung jawab untuk memulai seluruh sistem. Normalnya, installasi boot\n" "loader dilakukan secara otomatis. DrakX akan menganalisa sektor boot disk\n" "dan bekerja menurut apa yang ditemukannya:\n" "\n" " * jika ditemukan sektor boot Windows, ia akan menggantinya dengan sektor\n" "boot grub/LILO. Dengan demikian Anda akan dapat memuat GNU/Linux atau OS\n" "lain.\n" "\n" " * jika ditemukan sektor boot grub/LILO, akan diganti dengan yang baru.\n" "\n" "Jika DrakX tidak dapat mengambil keputusan, ia akan menanyakan tempat\n" "meletakkan bootloader. Umumnya, \"%s\" adalah tempat teraman. Memilih\n" "\"%s\" tidak akan menginstall sembarang boot loader. Gunakan opsi ini\n" "jika Anda tahu apa yang Anda lakukan." #: help.pm:742 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other\n" "operating systems may offer you one, but Mandrakelinux offers two. Each of\n" "the printing systems is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "within networks.) It's recommended that you use \"pdq\" if this is your\n" "first experience with GNU/Linux.\n" "\n" " * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n" "choice for printing to your local printer or to one halfway around the\n" "planet. It's simple to configure and can act as a server or a client for\n" "the ancient \"lpd\" printing system, so it's compatible with older\n" "operating systems which may still need print services. While quite\n" "powerful, the basic setup is almost as easy as \"pdq\". If you need to\n" "emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n" "\"%s\" includes graphical front-ends for printing or choosing printer\n" "options and for managing the printer.\n" "\n" "If you make a choice now, and later find that you do not like your printing\n" "system you may change it by running PrinterDrake from the Mandrakelinux\n" "Control Center and clicking on the \"%s\" button." msgstr "" "Sekarang, waktunya memilih sistem pencetakan untuk komputer Anda. Sistem\n" "operasi lain mungkin menawarkan satu, tetapi Mandrakelinux menawarkan dua.\n" "Setiap sistem pencetakan sesuai untuk jenis konfigurasi tertentu.\n" "\n" " * \"%s\" - yang merupakan akronim untuk ``print, tidak ada antrian'',\n" "adalah pilihan jika Anda memiliki koneksi langsung ke printer Anda dan\n" "ingin bebas dari masalah kemacetan printer, serta tidak punya printer\n" "jaringan. (\"%s\" akan menangani kasus jaringan sederhana sehingga\n" "lambat ketika digunakan dalam jaringan. Anda direkomendasikan untuk\n" "menggunakan \"pdq\" jika ini pertama kali Anda mengenal GNU/Linux.\n" "\n" " * \"%s\" - kependekan dari ``Common Unix Printing System'' adalah pilihan\n" "yang canggih untuk mencetak ke printer lokal dan juga separuh planet. Opsi\n" "ini mudah dikonfigurasikan dan bisa berfungsi sebagai server/klien untuk\n" "sistem cetak \"lpd\" yang kuno, sehingga kompatibel dengan sistem lama yang\n" "mungkin masih membutuhkan layanan pencetakan. Meskipun handal, setup\n" "dasar hampir semudah \"pdq\". Jika Anda perlu mengemulasikan server \"lpd\"\n" "pastikan Anda mengaktifkan daemon \"cups-lpd\". %s menyertakan tampilan\n" "grafis untuk pencetakan atau memilih opsi printer dan mengelola printer.\n" "\n" "Jika Anda membuat pilihan sekarang dan nanti Anda tidak menyukai sistem \n" "cetak yang Anda pilih saat ini, Anda bisa merubahnya dengan menjalankan\n" "PrinterDrake dari Pusat Kontrol Mandrake dan klik tombol \"%s\"." #: help.pm:765 #, c-format msgid "pdq" msgstr "pdq" #: help.pm:765 printer/cups.pm:115 printer/data.pm:118 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:765 #, c-format msgid "Expert" msgstr "Ahli" #: help.pm:768 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "DrakX akan mencoba mendeteksi perangkat IDE yang ada pada komputer Anda.\n" "Ia juga mencari kartu SCSI PCI di sistem Anda. Jika kartu SCSI ditemukan\n" "DrakX akan otomatis meng-instal driver yang sesuai.\n" "\n" "Karena perangkat keras terkadang tak terdeteksi, DrakX mungkin gagal\n" "mendeteksi harddisk Anda. Jika demikian, Anda harus menentukan sendiri.\n" "\n" "Jika Anda harus menentukan adaptor SCSI PCI secara manual, DrakX akan\n" "menanyakan opsi konfigurasinya. Anda harus mengijinkan DrakX untuk\n" "mendeteksi perangkat keras untuk opsi khusus yang diperlukan untuk\n" "menginisialisasi adapter. Pada banyak kasus, DrakX biasanya melalui\n" "tahap ini tanpa ada masalah.\n" "\n" "Jika DrakX gagal mendeteksi opsi untuk menentukan parameter yang harus\n" "dikirimkan ke perangkat keras secara otomatis, Anda harus mengkonfigurasi\n" "driver secara manual." #: help.pm:786 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver." msgstr "" "\"%s\": jika kartu suara terdeteksi di sistem Anda, akan ditampilkan\n" "di sini. Jika kartu suara yang tampil tidak sesuai dengan yang ada pada\n" "sistem, Anda bisa klik pada tombol dan pilih driver lain." #: help.pm:788 help.pm:855 install_steps_interactive.pm:1005 #: install_steps_interactive.pm:1022 #, c-format msgid "Sound card" msgstr "Kartu suara" #: help.pm:791 #, c-format msgid "" "As a review, DrakX will present a summary of information it has gathered\n" "about your system. Depending on the hardware installed on your machine, you\n" "may have some or all of the following entries. Each entry is made up of the\n" "hardware item to be configured, followed by a quick summary of the current\n" "configuration. Click on the corresponding \"%s\" button to make the change.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you're not in this\n" "country, click on the \"%s\" button and choose another. If your country\n" "is not in the list shown, click on the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": by default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": verify the current mouse configuration and click on the button\n" "to change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to set up a new printer. The interface\n" "presented in our manual is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it'll be displayed\n" "here. If you notice the sound card is not the one actually present on your\n" "system, you can click on the button and choose a different driver.\n" "\n" " * \"%s\": if you have a TV card, this is where information about its\n" "configuration will be displayed. If you have a TV card and it is not\n" "detected, click on \"%s\" to try to configure it manually.\n" "\n" " * \"%s\": you can click on \"%s\" to change the parameters associated with\n" "the card if you feel the configuration is wrong.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if you wish to configure your Internet or local network access,\n" "you can do so now. Refer to the printed documentation or use the\n" "Mandrakelinux Control Center after the installation has finished to benefit\n" "from full in-line help.\n" "\n" " * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n" "you're installing on is to be located behind a proxy server.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click this\n" "button. This should be reserved to advanced users. Refer to the printed\n" "documentation or the in-line help about bootloader configuration in the\n" "Mandrakelinux Control Center.\n" "\n" " * \"%s\": through this entry you can fine tune which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" "Sebagai review, DrakX akan menampilkan ringkasan informasi yang dikumpulkan\n" "tentang sistem Anda. Bergantung pada perangkat keras yang terpasang pada\n" "komputer Anda, Anda mungkin memiliki beberapa atau semua daftar berikut.\n" "Setiap daftar terdiri dari daftar perangkat keras yang harus dikonfigurasi,\n" "diikuti dengan ringkasan singkat dari konfigurasi aktual. Klik pada tombol\n" "\"%s\" untuk melakukan perubahan.\n" "\n" " * \"%s\": periksa konfigurasi peta keyboard aktual dan lakukan perubahan ubah\n" "jika diperlukan.\n" "\n" " * \"%s\": periksa pilihan negara aktual. Jika Anda tidak berada pada negara\n" "ini, klik pada tombol \"%s\" dan pilih yang lain. Jika negara Anda tidak ada\n" "pada daftar berikut, klik tombol \"%s\" untuk mendapatkan daftar lengkap.\n" "\n" " * \"%s\": secara default, DrakX menyesuaikan zona waktu berdasarkan negara\n" "yang Anda pilih. Anda bisa klik pada tombol \"%s\" jika tidak benar.\n" "\n" " * \"%s\": verifikasi konfigurasi mouse aktual dan klik pada tombol untuk\n" "mengubahnya jika diperlukan.\n" "\n" " * \"%s\": klik pada tombol \"%s\" akan membuka wizard konfigurasi printer.\n" "Lihat bab ``Panduan Pemula'' untuk informasi lebih lanjut tentang cara\n" "setting printer baru. Antarmuka yang ada pada manual serupa dengan yang\n" "digunakan selama installasi.\n" "\n" " * \"%s\": jika kartu suara terdeteksi pada sistem Anda, akan ditampilkan\n" "disini. Jika Anda menyadari kartu suara yang ditampilkan bukan yang ada\n" "pada sistem Anda, Anda bisa klik pada tombol dan pilih driver lain.\n" "\n" " * \"%s\": Jika Anda memiliki kartu TV, informasi konfigurasinya akan\n" "ditampilkan disini. Jika Anda memiliki kartu TV dan tidak terdeteksi\n" "klik pada \"%s\" untuk mencoba mengkonfigurasinya secara manual.\n" "\n" " * \"%s\": Anda bisa klik pada \"%s\" untuk merubah parameter yang \n" "berhubungan dengan kartu jika Anda merasa konfigurasinya salah.\n" "\n" " * \"%s\": secara default, DrakX mengkonfigurasi antarmuka grafis Anda\n" "dalam resolusi \"800x600\" atau \"1024x768\". Jika tidak sesuai, klik\n" "pada \"%s\" untuk mengkonfigurasi ulang antarmuka grafis Anda.\n" "\n" " * \"%s\": jika Anda hendak mengkonfigurasi akses jaringan Internet\n" "atau lokal Anda, Anda bisa melakukannya sekarang. Lihat dokumentasi\n" "cetak atau gunakan Pusat Kontrol Mandrakelinux setelah installasi\n" "selesai untuk mengambil keuntungan dari bantuannya.\n" "\n" " * \"%s\": mengijinkan Anda mengkonfigurasi alamat proxy HTTP dan\n" "FTP jika komputer yang Anda install berada dibelakang server proxy.\n" "\n" " * \"%s\": daftar ini mengijinkan Anda mendefinisikan ulang tingkat\n" "keamanan seperti yang ditentukan pada langkah sebelumnya ().\n" "\n" " * \"%s\": jika Anda berencana untuk menghubungkan komputer Anda ke\n" "Internet, merupakan ide bagus untuk menjaga dari intrusi dengan \n" "memasang firewall. Lihat bab dari ``Panduan Pengguna'' untuk detail\n" "tentang setting firewall.\n" "\n" " * \"%s\": jika Anda hendak merubah konfigurasi bootloader Anda, klik\n" "tombol ini. Opsi ini ditujukan untuk pengguna tingkat lanjut. Lihat\n" "dokumentasi cetak atau bantuan tentang konfigurasi bootloader pada \n" "Pusat Kontrol Mandrakelinux.\n" "\n" " * \"%s\": melalui daftar ini Anda bisa menentukan layanan apa yang\n" "akan dijalankan pada komputer Anda. Jika Anda berencana untuk memakai\n" "komputer ini sebagai server, merupakan ide bagus untuk mereview setup\n" "ini." #: help.pm:855 install_steps_interactive.pm:964 standalone/drakclock:100 #, c-format msgid "Timezone" msgstr "Zona waktu" #: help.pm:855 install_steps_interactive.pm:1038 #, c-format msgid "TV card" msgstr "Kartu TV" #: help.pm:855 #, c-format msgid "ISDN card" msgstr "Kartu ISDN" #: help.pm:855 #, c-format msgid "Graphical Interface" msgstr "Antarmuka Grafis" #: help.pm:855 install_any.pm:1528 install_steps_interactive.pm:1056 #: standalone/drakbackup:2036 #, c-format msgid "Network" msgstr "Jaringan" #: help.pm:855 install_steps_interactive.pm:1071 #, c-format msgid "Proxies" msgstr "Proxy " #: help.pm:855 install_steps_interactive.pm:1082 #, c-format msgid "Security Level" msgstr "Tingkat Keamanan" #: help.pm:855 install_steps_interactive.pm:1096 #, c-format msgid "Firewall" msgstr "Firewall" #: help.pm:855 install_steps_interactive.pm:1110 #, c-format msgid "Bootloader" msgstr "Bootloader" #: help.pm:855 install_steps_interactive.pm:1123 services.pm:193 #, c-format msgid "Services" msgstr "Layanan" #: help.pm:858 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrakelinux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Pilih harddrive yang akan dihapus untuk menginstall partisi Mandrakelinux\n" "baru Anda. Hati-hati, semua data pada drive ini akan hilang dan\n" "tidak dapat dikembalikan seperti semula!" #: help.pm:863 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Klik pada \"%s\" jika Anda ingin menghapus semua data dan partisi yang ada\n" "pada harddisk ini. Hati-hati, setelah mengklik \"%s\" Anda tidak dapat\n" "mengembalikan data dan partisi pada drive ini termasuk data Windows.\n" "\n" "Klik pada \"%s\" untuk keluar dari operasi ini tanpa kehilangan data dan\n" "partisi yang ada pada harddisk ini." #: help.pm:869 #, c-format msgid "Next ->" msgstr "Berikutnya ->" #: help.pm:869 #, c-format msgid "<- Previous" msgstr "<- Sebelumnya" #: install2.pm:117 #, c-format msgid "" "Can not access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Tidak bisa mengakses modul kernel yang berhubungan dengan kernal Anda " "(file %s hilang), ini biasanya berarti disket boot tidak sinkron dengan " "media instalasi (buatlah disket boot baru)" #: install2.pm:167 #, c-format msgid "You must also format %s" msgstr "Anda juga harus memformat %s" #: install_any.pm:376 #, c-format msgid "Do you have further supplementary media?" msgstr "Apakah Anda memiliki media tambahan lagi?" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:379 #, fuzzy, c-format msgid "" "The following media have been found and will be used during install: %s.\n" "\n" "\n" "Do you have a supplementary installation media to configure?" msgstr "" "Media berikut ditemukan dan akan digunakan selama installasi: %s\n" "\n" "\n" "Apakah Anda memiliki media tambahan untuk dikonfigurasikan?" #: install_any.pm:388 printer/printerdrake.pm:2929 #: printer/printerdrake.pm:2936 standalone/scannerdrake:182 #: standalone/scannerdrake:190 standalone/scannerdrake:241 #: standalone/scannerdrake:248 #, c-format msgid "CD-ROM" msgstr "CD-ROM" #: install_any.pm:388 #, c-format msgid "Network (http)" msgstr "Jaringan (http)" #: install_any.pm:388 #, c-format msgid "Network (ftp)" msgstr "Jaringan (ftp)" #: install_any.pm:436 standalone/drakbackup:112 #, c-format msgid "No device found" msgstr "Tidak ada divais yang ditemukan" #: install_any.pm:440 #, c-format msgid "Insert the CD" msgstr "Masukkan CD" #: install_any.pm:445 #, c-format msgid "Unable to mount CD-ROM" msgstr "Gagal me-mount CD-ROM" #: install_any.pm:468 #, c-format msgid "Insert the CD 1 again" msgstr "Masukkan CD 1 kembali" #: install_any.pm:478 install_any.pm:482 #, c-format msgid "URL of the mirror?" msgstr "URL dari mirror?" #: install_any.pm:515 #, c-format msgid "" "Can't find a package list file on this mirror. Make sure the location is " "correct." msgstr "" "Tidak dapat menemukan file daftar paket pada mirror ini. Pastikan " "lokasinya benar." #: install_any.pm:633 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done." msgstr "" "Ganti Cd-Rom!\n" "\n" "Masukkan Cd-Rom berlabel \"%s\" pada drive dan tekan Ok ketika selesai." #: install_any.pm:652 #, c-format msgid "Copying in progress" msgstr "Penyalinan sedang berjalan" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:783 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They do not have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Anda telah memilih server berikut: %s\n" "\n" "\n" "Server ini aktif secara default. Mereka tidak memiliki masalah keamanan,\n" "tetapi bisa saja ditemukan. Pada kasus tersebut, Anda harus memastikan\n" "untuk melakukan upgrade secepat mungkin.\n" "\n" "\n" "Apakah Anda hendak menginstall server ini?\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_any.pm:806 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Paket berikut akan dihapus agar sistem Anda dapat di-upgrade: %s\n" "\n" "\n" "Apakah Anda ingin menghapus paket tersebut?\n" #: install_any.pm:1214 partition_table.pm:603 #, c-format msgid "Error reading file %s" msgstr "Kesalahan membaca file %s" #: install_any.pm:1425 #, c-format msgid "The following disk(s) were renamed:" msgstr "Disk berikut telah diubah namanya:" #: install_any.pm:1427 #, c-format msgid "%s (previously named as %s)" msgstr "%s (sebelumnya bernama %s)" #: install_any.pm:1465 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Kesalahan terjadi - tidak ada divais valid yang ditemukan untuk membuat " "sistem file baru. Periksa kembali perangkat keras Anda untuk mencari " "penyebabnya" #: install_any.pm:1509 #, c-format msgid "HTTP" msgstr "HTTP" #: install_any.pm:1509 #, c-format msgid "FTP" msgstr "FTP" #: install_any.pm:1509 #, c-format msgid "NFS" msgstr "HFS" #: install_any.pm:1532 #, c-format msgid "Please choose a media" msgstr "Silahkan pilih media" #: install_any.pm:1564 #, c-format msgid "Bad media %s" msgstr "Media rusak %s" #: install_any.pm:1576 #, c-format msgid "File already exists. Overwrite it?" msgstr "File sudah ada. Timpa file ini ?" #: install_any.pm:1627 #, c-format msgid "Can not make screenshots before partitioning" msgstr "Tidak bisa membuat screenshot sebelum buat partisi" #: install_any.pm:1634 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Screenshot akan tersedia setelah installasi pada %s" #: install_gtk.pm:136 #, c-format msgid "System installation" msgstr "Installasi sistem" #: install_gtk.pm:139 #, c-format msgid "System configuration" msgstr "Konfigurasi sistem" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Beberapa perangkat keras pada komputer Anda memerlukan driver \n" "``proprietary'' agar bekerja. Anda bisa mencarinya pada : %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Anda harus memiliki partisi root.\n" "Caranya, buatlah sebuah partisi (atau pilih yang sudah ada).\n" "Lalu pilih aksi ``Mount point'' dan set ke `/'" #: install_interactive.pm:67 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Anda belum memiliki partisi swap\n" "\n" "Lanjutkan?" #: install_interactive.pm:70 install_steps.pm:211 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Anda harus memiliki partisi FAT termount pada /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Tidak cukup ruangan kosong untuk alokasi partisi baru" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Gunakan partisi yang sudah ada" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Tidak ada partisi yang bisa digunakan" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Gunakan partisi Windows untuk loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Partisi mana yang hendak dipakai oleh Linux4Win?" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Pilih ukurannya" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Ukuran partisi root dalam MB: " #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Ukuran partisi swap dalam MB: " #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "Tidak ada partisi FAT untuk loopback (atau tidak ada ruang tersisa)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "partisi mana yang hendak Anda ubah ukurannya?" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "Pengubah FAT tidak mampu menangani partisi Anda, \n" "Kesalahan berikut muncul: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Menghitung ukuran partisi Windows" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrakelinux " "installation." msgstr "" "Partisi Windows Anda terlalu terfragmen. Harap reboot komputer Anda " "pada Windows, jalankan utilitas ``defrag'', lalu ulangi installasi " "Mandrakelinux." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_interactive.pm:166 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "PERINGATAN!\n" "\n" "DrakX sekarang akan mengubah ukuran partisi Windows Anda.\n" "Hati-hati: proses ini amat berbahaya. Bila Anda belum pernah\n" "melakukannya, Anda harus keluar dari proses instalasi ini,\n" "lalu reboot ke windows jalankan \"chkdsk c:\" dari Command\n" "Prompt (hati-hati, menjalankan program grafis \"scandisk\"\n" "tidaklah cukup, pastikan menggunakan \"chkdsk\" dari Command\n" "Prompt!), juga defrag, lalu ulangi installasi. Anda juga\n" "harus membackup data Anda.\n" "Jika yakin, tekan Ok." #: install_interactive.pm:178 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Ukuran mana yang hendak Anda gunakan untuk Windows" #: install_interactive.pm:179 #, c-format msgid "partition %s" msgstr "partisi %s" #: install_interactive.pm:188 #, c-format msgid "Resizing Windows partition" msgstr "Mengubah ukuran partisi Windows" #: install_interactive.pm:193 #, c-format msgid "FAT resizing failed: %s" msgstr "Pengubahan ukuran FAT gagal: %s" #: install_interactive.pm:208 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "Tidak ada partisi FAT untuk diubah ukurannya (atau " "tidak ada ruangan tersisa)" #: install_interactive.pm:213 #, c-format msgid "Remove Windows(TM)" msgstr "Hapus Windows(TM)" #: install_interactive.pm:215 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Anda memiliki lebih dari satu harddisk, mana yang akan Anda pakai " "untuk menginstall Linux?" #: install_interactive.pm:219 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "SEMUA partisi yang ada beserta data pada drive %s akan hilang" #: install_interactive.pm:232 #, c-format msgid "Use fdisk" msgstr "Gunakan fdisk" #: install_interactive.pm:235 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Anda kini dapat mempartisi %s.\n" "Ketika selesai jangan lupa simpan dengan tombol `w'" #: install_interactive.pm:271 #, c-format msgid "I can not find any room for installing" msgstr "Tidak ada ruang untuk installasi" #: install_interactive.pm:275 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Wizard partisi DrakX menemukan solusi berikut:" #: install_interactive.pm:281 #, c-format msgid "Partitioning failed: %s" msgstr "Proses partisi gagal: %s" #: install_interactive.pm:288 #, c-format msgid "Bringing up the network" msgstr "Mengaktifkan jaringan" #: install_interactive.pm:293 #, c-format msgid "Bringing down the network" msgstr "Menonaktifkan jaringan" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Mandrakelinux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrakelinux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrakelinux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" msgstr "" "Introduction\n" "\n" "The operating system and the different components available in the Linux-" "Mandrake distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Linux-Mandrake distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandrakesoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandrakesoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandrakesoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandrakesoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Linux-Mandrake sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandrakesoft.\n" "The programs developed by Mandrakesoft S.A. are governed by the GPL License. " "Documentation written \n" "by Mandrakesoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandrakesoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of " "Mandrakesoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandrakesoft S.A. \n" #: install_messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Peringatan: Free Software mungkin tidak lepas dari paten, dan beberapa\n" "Free Software yang disertakan mungkin tercakup paten negara Anda.\n " "Misalnya dekoder MP3 yang disertakan mungkin membutuhkan lisensi untuk\n" "penggunaan lebih lanjut (lihat http://www.mp3licensing.com untuk detail).\n" "Jika Anda tidak yakin apakan paten berlaku pada Anda, periksa hukum lokal\n" "Anda." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Peringatan\n" "\n" "Harap membaca semua ketentuan di bawah. Bila Anda tidak setuju dengan\n" "salah satu bagiannya, Anda tidak diijinkan menginstal media CD\n" "berikutnya. Silakan tekan 'Tolak' untuk melanjutkan instalasi tanpa\n" "menggunakan media ini.\n" "\n" "\n" "Beberapa komponen yang ada di media CD berikutnya tidak diatur dalam\n" "lisensi GPL atau perjanjian sejenis. Komponen-komponen tersebut \n" "diatur dalam ketentuan dan kondisi dalam lisensi yang bersangkutan.\n" "Baca dengan hati-hati dan penuhi setiap lisensi sebelum Anda\n" "menggunakan atau mendistribusikan ulang komponen tersebut.\n" "Model lisensi tersebut akan melarang proses transfer, duplikasi\n" "(kecuali untuk alasan backup), distribusi ulang, rekayasa ulang,\n" "de-assembly, de-kompilasi, atau modifikasi komponen tersebut.\n" "Setiap pelanggaran pada perjanjian akan segera mengakhiri hak-hak\n" "Anda dalam lisensi tersebut, Anda tidak dapat menginstall program\n" "ini pada lebih dari satu sistem atau menggunakannya pada jaringan.\n" "Bila Anda masih ragu, silakan hubungi langsung distributor atau\n" "editor komponen ini. Anda dilarang mentransfer komponen ini ke pihak\n" "ketiga atau menyalinnya, termasuk dokumentasi.\n" "\n" "\n" "Semua hak pada komponen di media CD berikutnya dimiliki oleh pembuat\n" "masing-masing dan dilindungi oleh hukum hak cipta dan hak intelektual\n" "yang berlaku untuk program komputer.\n" #: install_messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of " "Mandrakelinux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrakelinux User's Guide." msgstr "" "Selamat, instalasi selesai.\n" "Ambil media boot dan tekan Return/Enter untuk reboot.\n" "\n" "\n" "Untuk informasi perbaikan yang tersedia untuk rilis Mandrakelinux\n" "ini, silakan lihat Errata yang tersedia pada:\n" "\n" "\n" "%s\n" "\n" "\n" "Informasi tentang konfigurasi sistem tersedia pada bab Pasca\n" "Instalasi di Panduan Pengguna Resmi Linux Mandrakelinux." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: install_messages.pm:144 #, c-format msgid "http://www.mandrakelinux.com/en/102errata.php3" msgstr "http://www.mandrakelinux.com/en/102errata.php3" #: install_steps.pm:246 #, c-format msgid "Duplicate mount point %s" msgstr "Duplikasi titik mount %s" #: install_steps.pm:479 #, c-format msgid "" "Some important packages did not get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm" "\"\n" msgstr "" "Beberapa paket penting tidak terinstall dengan benar.\n" "Mungkin drive cdrom atau cdromnya yang rusak.\n" "Periksa cdrom pada komputer yang sudah terinstal dengan\n" "perintah \"rpm -qpl media/main/*.rpm\"\n" #: install_steps.pm:599 #, c-format msgid "No floppy drive available" msgstr "Tidak ada floppy drive" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Memasuki langkah `%s'\n" #: install_steps_gtk.pm:177 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrakelinux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Sumber daya sistem Anda rendah. Anda akan mengalami kesulitan\n" "menginstall Mandrakelinux. Jika terjadi, Anda bisa mencoba\n" "installasi berbasis teks. Untuk melakukannya, tekan `F1' saat\n" "booting pada CDROM, lalu ketikkan `text'." #: install_steps_gtk.pm:224 install_steps_interactive.pm:624 #, c-format msgid "Package Group Selection" msgstr "Pilihan Grup Paket" #: install_steps_gtk.pm:250 install_steps_interactive.pm:567 #, c-format msgid "Total size: %d / %d MB" msgstr "Ukuran total: %d / %d MB" #: install_steps_gtk.pm:295 #, c-format msgid "Bad package" msgstr "Paket rusak" #: install_steps_gtk.pm:297 #, c-format msgid "Version: " msgstr "Versi: " #: install_steps_gtk.pm:298 #, c-format msgid "Size: " msgstr "Ukuran: " #: install_steps_gtk.pm:298 #, c-format msgid "%d KB\n" msgstr "%d KB\n" #: install_steps_gtk.pm:299 #, c-format msgid "Importance: " msgstr "Tingkat kepentingan: " #: install_steps_gtk.pm:332 #, c-format msgid "You can not select/unselect this package" msgstr "Anda tidak bisa memilih/tidak memilih paket ini" #: install_steps_gtk.pm:336 #, c-format msgid "due to missing %s" msgstr "karena %s hilang" #: install_steps_gtk.pm:337 #, c-format msgid "due to unsatisfied %s" msgstr "karena %s tidak terpenuhi" #: install_steps_gtk.pm:338 #, c-format msgid "trying to promote %s" msgstr "mencoba mempromosikan %s" #: install_steps_gtk.pm:339 #, c-format msgid "in order to keep %s" msgstr "untuk menjaga %s" #: install_steps_gtk.pm:344 #, c-format msgid "" "You can not select this package as there is not enough space left to install " "it" msgstr "" "Anda tidak bisa memilih paket ini karena tidak ada ruang kosong yang tersisa" #: install_steps_gtk.pm:347 #, c-format msgid "The following packages are going to be installed" msgstr "Paket berikut akan diinstal" #: install_steps_gtk.pm:348 #, c-format msgid "The following packages are going to be removed" msgstr "Paket berikut akan dihapus" #: install_steps_gtk.pm:372 #, c-format msgid "This is a mandatory package, it can not be unselected" msgstr "Ini merupakan paket wajib, tidak bisa dibuang" #: install_steps_gtk.pm:374 #, c-format msgid "You can not unselect this package. It is already installed" msgstr "Anda tidak bisa tidak memilih paket ini. Ia sudah terinstall" #: install_steps_gtk.pm:377 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Paket ini harus diupgrade\n" "Apakah Anda yakin untuk tidak memilihnya?" #: install_steps_gtk.pm:380 #, c-format msgid "You can not unselect this package. It must be upgraded" msgstr "Anda tidak bisa tidak memilih paket. Paket harus diupgrade" #: install_steps_gtk.pm:385 #, c-format msgid "Show automatically selected packages" msgstr "Tunjukkan paket yang sudah dipilih secara otomatis" #: install_steps_gtk.pm:390 #, c-format msgid "Load/Save selection" msgstr "Pilihan Muat/Simpan" #: install_steps_gtk.pm:391 #, c-format msgid "Updating package selection" msgstr "Mengupdate pilihan paket" #: install_steps_gtk.pm:396 #, c-format msgid "Minimal install" msgstr "Instalasi minimal" #: install_steps_gtk.pm:410 install_steps_interactive.pm:483 #, c-format msgid "Choose the packages you want to install" msgstr "Pilih paket yang akan diinstal" #: install_steps_gtk.pm:426 install_steps_interactive.pm:706 #, c-format msgid "Installing" msgstr "Menginstall" #: install_steps_gtk.pm:433 #, c-format msgid "Estimating" msgstr "Memperkirakan" #: install_steps_gtk.pm:482 #, c-format msgid "No details" msgstr "Tanpa Detail" #: install_steps_gtk.pm:490 #, c-format msgid "Time remaining " msgstr "Sisa waktu" #: install_steps_gtk.pm:497 #, c-format msgid "Please wait, preparing installation..." msgstr "Harap tunggu, mempersiapkan installasi..." #: install_steps_gtk.pm:512 #, c-format msgid "%d packages" msgstr "%d paket" #: install_steps_gtk.pm:517 #, c-format msgid "Installing package %s" msgstr "Menginstall paket %s" #: install_steps_gtk.pm:552 install_steps_interactive.pm:92 #: install_steps_interactive.pm:731 #, c-format msgid "Refuse" msgstr "Tolak" #: install_steps_gtk.pm:556 install_steps_interactive.pm:735 #, c-format msgid "" "Change your Cd-Rom!\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you do not have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Ganti Cd-Rom Anda!\n" "\n" "Masukkan Cd-Rom berlabel \"%s\" pada drive dan tekan Ok. Jika Anda tidak \n" "punya, tekan Batal untuk menghindari instalasi dari Cd-Rom ini." #: install_steps_gtk.pm:571 install_steps_interactive.pm:746 #, c-format msgid "There was an error ordering packages:" msgstr "Terdapat kesalahan pengurutan paket:" #: install_steps_gtk.pm:571 install_steps_gtk.pm:575 #: install_steps_interactive.pm:746 install_steps_interactive.pm:750 #, c-format msgid "Go on anyway?" msgstr "Lanjutkan?" #: install_steps_gtk.pm:575 install_steps_interactive.pm:750 #, c-format msgid "There was an error installing packages:" msgstr "Terdapat kesalahan penginstallan paket:" #: install_steps_gtk.pm:617 install_steps_interactive.pm:920 #: install_steps_interactive.pm:1072 #, c-format msgid "not configured" msgstr "tidak dikonfigurasikan" #: install_steps_gtk.pm:680 #, c-format msgid "" "The following installation media have been found.\n" "If you want to skip some of them, you can unselect them now." msgstr "" "Media installasi berikut ditemukan. Jika Anda ingin\n" "melewati beberapa, Anda bisa tidak memilihnya sekarang." #: install_steps_gtk.pm:684 #, c-format msgid "" "You have the option to copy the contents of the CDs onto the hard drive " "before installation.\n" "It will then continue from the hard drive and the packages will remain " "available once the system is fully installed." msgstr "" "Anda memiliki opsi untuk menyalin isi CD pada hard disk sebelum" "installasi. Proses akan dilanjutkan dari hard disk dan paket akan" "tetap tersedia setelah sistem terinstall." #: install_steps_gtk.pm:686 #, c-format msgid "Copy whole CDs" msgstr "Salin seluruh CD" #: install_steps_interactive.pm:85 #, c-format msgid "License agreement" msgstr "Persetujuan Lisensi" #: install_steps_interactive.pm:89 #, c-format msgid "Release Notes" msgstr "Catatan Rilis" #: install_steps_interactive.pm:119 #, c-format msgid "Please choose your keyboard layout." msgstr "Pilih layout keyboard Anda." #: install_steps_interactive.pm:121 #, c-format msgid "Here is the full list of available keyboards" msgstr "Berikut daftar keyboard yang tersedia" #: install_steps_interactive.pm:151 #, c-format msgid "Install/Upgrade" msgstr "Instal/Upgrade" #: install_steps_interactive.pm:152 #, c-format msgid "Is this an install or an upgrade?" msgstr "Installasi atau upgrade?" #: install_steps_interactive.pm:158 #, c-format msgid "Upgrade %s" msgstr "Upgrade %s" #: install_steps_interactive.pm:168 #, c-format msgid "Encryption key for %s" msgstr "Kunci enkripsi untuk %s" #: install_steps_interactive.pm:185 #, c-format msgid "Please choose your type of mouse." msgstr "Pilihlah tipe mouse Anda." #: install_steps_interactive.pm:194 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Port Mouse" #: install_steps_interactive.pm:195 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Pilih serial port yang digunakan mouse Anda." #: install_steps_interactive.pm:205 #, c-format msgid "Buttons emulation" msgstr "Emulasi tombol" #: install_steps_interactive.pm:207 #, c-format msgid "Button 2 Emulation" msgstr "Emulasi tombol 2" #: install_steps_interactive.pm:208 #, c-format msgid "Button 3 Emulation" msgstr "Emulasi tombol 3" #: install_steps_interactive.pm:229 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:229 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Mengkonfigurasi kartu PCMCIA..." #: install_steps_interactive.pm:236 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:236 #, c-format msgid "Configuring IDE" msgstr "Mengkonfigurasi IDE" #: install_steps_interactive.pm:256 network/tools.pm:172 #, c-format msgid "No partition available" msgstr "Tidak ada partisi" #: install_steps_interactive.pm:259 #, c-format msgid "Scanning partitions to find mount points" msgstr "Mendeteksi partisi untuk mencari titik mount" #: install_steps_interactive.pm:266 #, c-format msgid "Choose the mount points" msgstr "Pilih titik mount" #: install_steps_interactive.pm:312 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Tidak ada ruang 1MB untuk bootstrap! Installasi akan dilanjutkan, tetapi " "untuk boot sistem, Anda perlu membuat partisi bootstrap pada DiskDrake" #: install_steps_interactive.pm:317 #, c-format msgid "" "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but " "to boot your system, you'll need to create the bootstrap partition in " "DiskDrake" msgstr "" "Anda harus membuat PPC PReP Boot bootstrap! Installasi akan dilanjutkan, " "tetapi untuk boot sistem, Anda perlu membuat partisi bootstrap pada DiskDrake" #: install_steps_interactive.pm:353 #, c-format msgid "Choose the partitions you want to format" msgstr "Pilih partisi yang akan diformat" #: install_steps_interactive.pm:355 #, c-format msgid "Check bad blocks?" msgstr "Periksa blok rusak?" #: install_steps_interactive.pm:383 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Gagal menguji sistem file %s. Apakah Anda ingin memperbaiki kesalahan? " "(hati-hati, data Anda bisa hilang)" #: install_steps_interactive.pm:386 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Ruang swap tidak cukup untuk installasi. Harap ditambah" #: install_steps_interactive.pm:393 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Mencari paket yang tersedia dan membangun ulang database rpm..." #: install_steps_interactive.pm:394 install_steps_interactive.pm:452 #, c-format msgid "Looking for available packages..." msgstr "Mencari paket yang tersedia..." #: install_steps_interactive.pm:397 #, c-format msgid "Looking at packages already installed..." msgstr "Mencari paket yang sudah terinstall..." #: install_steps_interactive.pm:401 #, c-format msgid "Finding packages to upgrade..." msgstr "Mencari paket untuk diupgrade..." #: install_steps_interactive.pm:421 install_steps_interactive.pm:825 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Pilih mirror tempat Anda ingin mengambil paket" #: install_steps_interactive.pm:461 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Sistem Anda tidak memiliki cukup ruang untuk installasi atau upgrade (%d " "> %d)" #: install_steps_interactive.pm:495 #, c-format msgid "" "Please choose load or save package selection.\n" "The format is the same as auto_install generated files." msgstr "" "Pilih muat atau simpan pilihan paket.\n" "Formatnya sama dengan file auto_install." #: install_steps_interactive.pm:497 #, c-format msgid "Load" msgstr "Beban" #: install_steps_interactive.pm:497 standalone/drakbackup:3924 #: standalone/drakbackup:3997 standalone/logdrake:173 #, c-format msgid "Save" msgstr "Simpan" #: install_steps_interactive.pm:505 #, c-format msgid "Bad file" msgstr "File rusak" #: install_steps_interactive.pm:581 #, c-format msgid "Selected size is larger than available space" msgstr "Ukuran terpilih melebihi ruang yang ada" #: install_steps_interactive.pm:596 #, c-format msgid "Type of install" msgstr "Tipe instalasi" #: install_steps_interactive.pm:597 #, c-format msgid "" "You have not selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Anda belum memilih grup paket.\n" "Pilih instalasi minimal yang Anda inginkan:" #: install_steps_interactive.pm:601 #, c-format msgid "With basic documentation (recommended!)" msgstr "Dengan dokumentasi dasar (disarankan!)" #: install_steps_interactive.pm:602 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Instalasi minimal sesungguhnya (khususnya tanpa urpmi)" #: install_steps_interactive.pm:641 standalone/drakxtv:52 #, c-format msgid "All" msgstr "Semua" #: install_steps_interactive.pm:680 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Jika Anda memiliki semua CD pada daftar di bawah, tekan OK.\n" "Jika tidak memiliki sama sekali, click Cancel.\n" "Jika beberapa CD tidak ada, jangan pilih, lalu klik Ok." #: install_steps_interactive.pm:685 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "CD-ROM berlabel \"%s\"" #: install_steps_interactive.pm:706 #, c-format msgid "Preparing installation" msgstr "Mempersiapkan installasi" #: install_steps_interactive.pm:715 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Menginstall paket %s\n" "%d%%" #: install_steps_interactive.pm:764 #, c-format msgid "Post-install configuration" msgstr "Konfigurasi pasca installasi" #: install_steps_interactive.pm:770 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Masukkan disket Update Modules pada drive %s" #: install_steps_interactive.pm:799 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates?" msgstr "" "Anda kini memiliki kesempatan untuk mendownload paket update. Paket ini\n" "telah diupdate setelah distribusi dirilis. Paket mungkin berisi perbaikan\n" "keamanan atau cacat.\n" "\n" "Untuk mendownload paket, Anda perlu koneksi Internet.\n" "\n" "Apakah Anda ingin menginstall update?" #: install_steps_interactive.pm:820 #, c-format msgid "" "Contacting Mandrakelinux web site to get the list of available mirrors..." msgstr "" "Menghubungi situs Mandrakelinux untuk mengambil daftar mirror..." #: install_steps_interactive.pm:839 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Menghubungi mirror untuk mendapatkan daftar paket yang tersedia..." #: install_steps_interactive.pm:843 #, c-format msgid "Unable to contact mirror %s" msgstr "Tidak mampu menghubungi mirror %s" #: install_steps_interactive.pm:843 #, c-format msgid "Would you like to try again?" msgstr "Apakah Anda ingin mencoba lagi?" #: install_steps_interactive.pm:869 standalone/drakclock:45 #, c-format msgid "Which is your timezone?" msgstr "Mana zone waktu Anda?" #: install_steps_interactive.pm:874 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Sinkronisasi waktu otomatis (menggunakan NTP)" #: install_steps_interactive.pm:882 #, c-format msgid "NTP Server" msgstr "Server NTP" #: install_steps_interactive.pm:924 steps.pm:30 #, c-format msgid "Summary" msgstr "Ringkasan" #: install_steps_interactive.pm:937 install_steps_interactive.pm:945 #: install_steps_interactive.pm:963 install_steps_interactive.pm:970 #: install_steps_interactive.pm:1122 services.pm:133 #: standalone/drakbackup:1599 #, c-format msgid "System" msgstr "Sistem" #: install_steps_interactive.pm:977 install_steps_interactive.pm:1004 #: install_steps_interactive.pm:1021 install_steps_interactive.pm:1037 #: install_steps_interactive.pm:1048 #, c-format msgid "Hardware" msgstr "Perangkat Keras" #: install_steps_interactive.pm:983 install_steps_interactive.pm:992 #, c-format msgid "Remote CUPS server" msgstr "Server CUPS remote" #: install_steps_interactive.pm:983 #, c-format msgid "No printer" msgstr "Tidak ada printer" #: install_steps_interactive.pm:1025 #, c-format msgid "Do you have an ISA sound card?" msgstr "Apakah Anda memiliki kartu suara ISA?" #: install_steps_interactive.pm:1027 #, c-format msgid "" "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound " "card" msgstr "" "Jalankan \"sndconfig\" atau \"sndconfig\" setelah instalasi untuk " "mengkonfigurasi kartu suara Anda" #: install_steps_interactive.pm:1029 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "Tidak ada kartu suara yang terdeteksi. Coba \"harddrake\" " "setelah instalasi" #: install_steps_interactive.pm:1049 #, c-format msgid "Graphical interface" msgstr "Antarmuka grafis" #: install_steps_interactive.pm:1055 install_steps_interactive.pm:1070 #, c-format msgid "Network & Internet" msgstr "Jaringan & Internet" #: install_steps_interactive.pm:1072 #, c-format msgid "configured" msgstr "terkonfigurasi" #: install_steps_interactive.pm:1081 install_steps_interactive.pm:1095 #: steps.pm:20 #, c-format msgid "Security" msgstr "Keamanan" #: install_steps_interactive.pm:1100 #, c-format msgid "activated" msgstr "telah diaktifkan" #: install_steps_interactive.pm:1100 #, c-format msgid "disabled" msgstr "telah dinonaktifkan" #: install_steps_interactive.pm:1109 #, c-format msgid "Boot" msgstr "Boot" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1113 #, c-format msgid "%s on %s" msgstr "%s pada %s" #: install_steps_interactive.pm:1127 services.pm:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Layanan: %d diaktifkan untuk %d tercatat" #: install_steps_interactive.pm:1137 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Anda belum mengkonfigurasi X. Apakah Anda yakin?" #: install_steps_interactive.pm:1217 #, c-format msgid "Preparing bootloader..." msgstr "Mempersiapkan bootloader..." #: install_steps_interactive.pm:1227 #, c-format msgid "" "You appear to have an OldWorld or Unknown machine, the yaboot bootloader " "will not work for you. The install will continue, but you'll need to use " "BootX or some other means to boot your machine. The kernel argument for the " "root fs is: root=%s" msgstr "" "Nampaknya Anda memiliki komputer kuno/tidak dikenal, bootloader yaboot " "tidak akan bekerja. Installasi akan dilanjutkan, tetapi Anda harus " "menggunakan BootX atau cara lain untuk boot komputer Anda. Argumen " "kernel untuk fs root adalah: root=%s" #: install_steps_interactive.pm:1233 #, c-format msgid "Do you want to use aboot?" msgstr "Apakah Anda ingin menggunakan aboot?" #: install_steps_interactive.pm:1236 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Kesalahan menginstall aboot,\n" "paksakan instalasi meskipun merusak partisi pertama?" #: install_steps_interactive.pm:1257 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" "Pada tingkat keamanan ini, akses pada file pada partisi Windows " "dibatasi hanya pada administrator." #: install_steps_interactive.pm:1286 standalone/drakautoinst:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Masukkan disket kosong pada drive %s" #: install_steps_interactive.pm:1291 #, c-format msgid "Please insert another floppy for drivers disk" msgstr "Masukkan disket lain untuk disket driver" #: install_steps_interactive.pm:1293 #, c-format msgid "Creating auto install floppy..." msgstr "Membuat disket installasi otomatis..." #: install_steps_interactive.pm:1305 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Beberapa langkah tidak selesai.\n" "\n" "Apakah Anda ingin keluar sekarang?" #: install_steps_interactive.pm:1321 #, c-format msgid "Generate auto install floppy" msgstr "Membuat disket instalasi otomatis" #: install_steps_interactive.pm:1323 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Installasi otomatis dapat dibuat otomatis penuh jika\n" "diinginkan, pada kasus ini akan mengambil hard disk!!\n" "(ini berarti untuk menginstall pada komputer lain).\n" "\n" "Anda mungkin memilih untuk mengulangi installasi.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrakelinux Installation %s" msgstr "Instalasi Mandrakelinux %s" #. -PO: This string must fit in a 80-char wide text screen #: install_steps_newt.pm:34 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / antar elemen | untuk memilih | layar berikut" #: interactive.pm:184 #, c-format msgid "Choose a file" msgstr "Pilih file" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakbackup:1540 #: standalone/drakfont:593 standalone/drakfont:660 standalone/drakups:297 #: standalone/drakups:357 standalone/drakups:377 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Add" msgstr "Tambah" #: interactive.pm:309 interactive/gtk.pm:489 #, c-format msgid "Modify" msgstr "Modifikasi" #: interactive.pm:309 interactive/gtk.pm:489 standalone/drakups:299 #: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:333 #: standalone/drakvpn:694 #, c-format msgid "Remove" msgstr "Hapus" #: interactive.pm:386 #, c-format msgid "Basic" msgstr "Dasar" #: interactive.pm:424 interactive/newt.pm:317 ugtk2.pm:506 #, c-format msgid "Finish" msgstr "Selesai" #: interactive/newt.pm:92 #, c-format msgid "Do" msgstr "Lakukan" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Pilihan salah, silakan ulangi\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Pilihan Anda? (default %s) " #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Entri yang harus Anda isi:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Pilihan Anda? (0/1, default %s) " #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Tombol `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Apakah Anda ingin meng-klik pada tombol ini?" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Pilihan Anda? (default `%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr " masukkan`void' untuk entri kosong" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Banyak yang dapat dipilih dari (%s).\n" #: interactive/stdio.pm:125 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Pilihlah nomor pertama dari jangkauan 10 yang ingin Anda edit,\n" "atau tekan Enter untuk melanjutkan.\n" "Pilihan Anda? " #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Catatan, label berubah:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Kirim ulang" #: keyboard.pm:170 keyboard.pm:204 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTZ)" msgstr "" "_: keyboard\n" "Ceko (QWERTZ)" #: keyboard.pm:171 keyboard.pm:206 #, c-format msgid "" "_: keyboard\n" "German" msgstr "" "_: keyboard\n" "Jerman" #: keyboard.pm:172 #, c-format msgid "" "_: keyboard\n" "Dvorak" msgstr "" "_: keyboard\n" "Dvorak" #: keyboard.pm:173 keyboard.pm:223 #, c-format msgid "" "_: keyboard\n" "Spanish" msgstr "" "_: keyboard\n" "Spanyol" #: keyboard.pm:174 keyboard.pm:224 #, c-format msgid "" "_: keyboard\n" "Finnish" msgstr "" "_: keyboard\n" "Finlandia" #: keyboard.pm:175 keyboard.pm:227 #, c-format msgid "" "_: keyboard\n" "French" msgstr "" "_: keyboard\n" "Perancis" #: keyboard.pm:176 keyboard.pm:275 #, c-format msgid "" "_: keyboard\n" "Norwegian" msgstr "" "_: keyboard\n" "Norwegia" #: keyboard.pm:177 #, c-format msgid "" "_: keyboard\n" "Polish" msgstr "" "_: keyboard\n" "Polandia" #: keyboard.pm:178 keyboard.pm:287 #, c-format msgid "" "_: keyboard\n" "Russian" msgstr "" "_: keyboard\n" "Rusia" #: keyboard.pm:180 keyboard.pm:293 #, c-format msgid "" "_: keyboard\n" "Swedish" msgstr "" "_: keyboard\n" "Swedia" #: keyboard.pm:181 keyboard.pm:320 #, c-format msgid "UK keyboard" msgstr "Keyboard UK" #: keyboard.pm:182 keyboard.pm:323 #, c-format msgid "US keyboard" msgstr "Keyboard US" #: keyboard.pm:184 #, c-format msgid "" "_: keyboard\n" "Albanian" msgstr "" "_: keyboard\n" "Albania" #: keyboard.pm:185 #, c-format msgid "" "_: keyboard\n" "Armenian (old)" msgstr "" "_: keyboard\n" "Armenia (lama)" #: keyboard.pm:186 #, c-format msgid "" "_: keyboard\n" "Armenian (typewriter)" msgstr "" "_: keyboard\n" "Armenia (mesin ketik)" #: keyboard.pm:187 #, c-format msgid "" "_: keyboard\n" "Armenian (phonetic)" msgstr "" "_: keyboard\n" "Armenia (fonetik)" #: keyboard.pm:188 #, c-format msgid "" "_: keyboard\n" "Arabic" msgstr "" "_: keyboard\n" "Arab" #: keyboard.pm:189 #, c-format msgid "" "_: keyboard\n" "Azerbaidjani (latin)" msgstr "" "_: keyboard\n" "Azerbaijan (latin)" #: keyboard.pm:190 #, c-format msgid "" "_: keyboard\n" "Belgian" msgstr "" "_: keyboard\n" "Belgia" #: keyboard.pm:191 #, c-format msgid "" "_: keyboard\n" "Bengali (Inscript-layout)" msgstr "" "_: keyboard\n" "Bengal (Inscript)" #: keyboard.pm:192 #, c-format msgid "" "_: keyboard\n" "Bengali (Probhat)" msgstr "" "_: keyboard\n" "Bengal (Probhat)" #: keyboard.pm:193 #, c-format msgid "" "_: keyboard\n" "Bulgarian (phonetic)" msgstr "" "_: keyboard\n" "Bulagaria (fonetik)" #: keyboard.pm:194 #, c-format msgid "" "_: keyboard\n" "Bulgarian (BDS)" msgstr "" "_: keyboard\n" "Bulgaria (BDS)" #: keyboard.pm:195 #, c-format msgid "" "_: keyboard\n" "Brazilian (ABNT-2)" msgstr "" "_: keyboard\n" "Brazil (ABNT-2)" #: keyboard.pm:196 #, c-format msgid "" "_: keyboard\n" "Bosnian" msgstr "" "_: keyboard\n" "Bosnia" #: keyboard.pm:197 #, c-format msgid "" "_: keyboard\n" "Belarusian" msgstr "" "_: keyboard\n" "Belarusia" #: keyboard.pm:199 #, c-format msgid "" "_: keyboard\n" "Swiss (German layout)" msgstr "" "_: keyboard\n" "Swis (layout Jerman)" #: keyboard.pm:201 #, c-format msgid "" "_: keyboard\n" "Swiss (French layout)" msgstr "" "_: keyboard\n" "Swis (layout Prancis)" #: keyboard.pm:203 #, c-format msgid "" "_: keyboard\n" "Cherokee syllabics" msgstr "" "_: keyboard\n" "Cherokee silabis" #: keyboard.pm:205 #, c-format msgid "" "_: keyboard\n" "Czech (QWERTY)" msgstr "" "_: keyboard\n" "Ceko (QWERTY)" #: keyboard.pm:207 #, c-format msgid "" "_: keyboard\n" "German (no dead keys)" msgstr "" "_: keyboard\n" "Jerman (tanpa dead key)" #: keyboard.pm:208 #, c-format msgid "" "_: keyboard\n" "Devanagari" msgstr "" "_: keyboard\n" "Devanagari" #: keyboard.pm:209 #, c-format msgid "" "_: keyboard\n" "Danish" msgstr "" "_: keyboard\n" "Denmark" #: keyboard.pm:210 #, c-format msgid "" "_: keyboard\n" "Dvorak (US)" msgstr "" "_: keyboard\n" "Dvorak (US)" #: keyboard.pm:212 #, c-format msgid "" "_: keyboard\n" "Dvorak (Esperanto)" msgstr "" "_: keyboard\n" "Dvorak (Esperanto)" #: keyboard.pm:214 #, c-format msgid "" "_: keyboard\n" "Dvorak (French)" msgstr "" "_: keyboard\n" "Dvorak (Perancis)" #: keyboard.pm:216 #, c-format msgid "" "_: keyboard\n" "Dvorak (UK)" msgstr "" "_: keyboard\n" "Dvorak (UK)" #: keyboard.pm:217 #, c-format msgid "" "_: keyboard\n" "Dvorak (Norwegian)" msgstr "D" "_: keyboard\n" "vorak (Norwegia)" #: keyboard.pm:219 #, c-format msgid "" "_: keyboard\n" "Dvorak (Polish)" msgstr "" "_: keyboard\n" "Dvorak (Polandia)" #: keyboard.pm:220 #, c-format msgid "" "_: keyboard\n" "Dvorak (Swedish)" msgstr "" "_: keyboard\n" "Dvorak (Swedia)" #: keyboard.pm:221 #, c-format msgid "" "_: keyboard\n" "Dzongkha/Tibetan" msgstr "" "_: keyboard\n" "Dzongkha/Tibet" #: keyboard.pm:222 #, c-format msgid "" "_: keyboard\n" "Estonian" msgstr "" "_: keyboard\n" "Estonia" #: keyboard.pm:226 #, c-format msgid "" "_: keyboard\n" "Faroese" msgstr "" "_: keyboard\n" "Faroese" #: keyboard.pm:228 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Russian\" layout)" msgstr "" "_: keyboard\n" "Georgia (layout \"Rusia\")" #: keyboard.pm:229 #, c-format msgid "" "_: keyboard\n" "Georgian (\"Latin\" layout)" msgstr "" "_: keyboard\n" "Georgia (layout \"Latin\")" #: keyboard.pm:230 #, c-format msgid "" "_: keyboard\n" "Greek" msgstr "" "_: keyboard\n" "Yunani" #: keyboard.pm:231 #, c-format msgid "" "_: keyboard\n" "Greek (polytonic)" msgstr "" "_: keyboard\n" "Yunani (politonik)" #: keyboard.pm:232 #, c-format msgid "" "_: keyboard\n" "Gujarati" msgstr "" "_: keyboard\n" "Gujarat" #: keyboard.pm:233 #, c-format msgid "" "_: keyboard\n" "Gurmukhi" msgstr "" "_: keyboard\n" "Gurmukh" #: keyboard.pm:235 #, c-format msgid "" "_: keyboard\n" "Hungarian" msgstr "" "_: keyboard\n" "Hungaria" #: keyboard.pm:236 #, c-format msgid "" "_: keyboard\n" "Croatian" msgstr "" "_: keyboard\n" "Kroasia" #: keyboard.pm:237 #, c-format msgid "" "_: keyboard\n" "Irish" msgstr "" "_: keyboard\n" "Irlandia" #: keyboard.pm:238 #, c-format msgid "" "_: keyboard\n" "Israeli" msgstr "" "_: keyboard\n" "Israel" #: keyboard.pm:239 #, c-format msgid "" "_: keyboard\n" "Israeli (phonetic)" msgstr "" "_: keyboard\n" "Israel (fonetik)" #: keyboard.pm:240 #, c-format msgid "" "_: keyboard\n" "Iranian" msgstr "" "_: keyboard\n" "Iran" #: keyboard.pm:241 #, c-format msgid "" "_: keyboard\n" "Icelandic" msgstr "" "_: keyboard\n" "Islandia" #: keyboard.pm:242 #, c-format msgid "" "_: keyboard\n" "Italian" msgstr "" "_: keyboard\n" "Italia" #: keyboard.pm:243 #, c-format msgid "" "_: keyboard\n" "Inuktitut" msgstr "" "_: keyboard\n" "Inuktitut" #: keyboard.pm:248 #, c-format msgid "" "_: keyboard\n" "Japanese 106 keys" msgstr "" "_: keyboard\n" "Jepang 106 tombol" #: keyboard.pm:249 #, c-format msgid "" "_: keyboard\n" "Kannada" msgstr "" "_: keyboard\n" "Kannada" #: keyboard.pm:252 #, c-format msgid "" "_: keyboard\n" "Korean" msgstr "" "_: keyboard\n" "Korea" #: keyboard.pm:254 #, c-format msgid "" "_: keyboard\n" "Kurdish (arabic script)" msgstr "" "_: keyboard\n" "Kurdi (script Arab)" #: keyboard.pm:255 #, c-format msgid "" "_: keyboard\n" "Kyrgyz" msgstr "" "_: keyboard\n" "Kirgiztan" #: keyboard.pm:256 #, c-format msgid "" "_: keyboard\n" "Latin American" msgstr "" "_: keyboard\n" "Amerika Latin" #: keyboard.pm:257 #, c-format msgid "" "_: keyboard\n" "Laotian" msgstr "" "_: keyboard\n" "Laos" #: keyboard.pm:259 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (old)" msgstr "" "_: keyboard\n" "Lithuania AZERTY (lama)" #: keyboard.pm:262 #, c-format msgid "" "_: keyboard\n" "Lithuanian AZERTY (new)" msgstr "" "_: keyboard\n" "Lithuania AZERTY (baru)" #: keyboard.pm:264 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"number row\" QWERTY" msgstr "" "_: keyboard\n" "Lithuania \"jumlah baris\" QWERTY" #: keyboard.pm:266 #, c-format msgid "" "_: keyboard\n" "Lithuanian \"phonetic\" QWERTY" msgstr "" "_: keyboard\n" "Lithuania \"fonetik\" QWERTY" #: keyboard.pm:267 #, c-format msgid "" "_: keyboard\n" "Latvian" msgstr "" "_: keyboard\n" "Latvia" #: keyboard.pm:268 #, c-format msgid "" "_: keyboard\n" "Malayalam" msgstr "" "_: keyboard\n" "Malayalam" #: keyboard.pm:269 #, c-format msgid "" "_: keyboard\n" "Macedonian" msgstr "" "_: keyboard\n" "Makedonia" #: keyboard.pm:270 #, c-format msgid "" "_: keyboard\n" "Myanmar (Burmese)" msgstr "" "_: keyboard\n" "Myanmar (Burma)" #: keyboard.pm:271 #, c-format msgid "" "_: keyboard\n" "Mongolian (cyrillic)" msgstr "" "_: keyboard\n" "Mongol (cyrillic)" #: keyboard.pm:272 #, c-format msgid "" "_: keyboard\n" "Maltese (UK)" msgstr "" "_: keyboard\n" "Malta (Inggris)" #: keyboard.pm:273 #, c-format msgid "" "_: keyboard\n" "Maltese (US)" msgstr "" "_: keyboard\n" "Malta (Amerika)" #: keyboard.pm:274 #, c-format msgid "" "_: keyboard\n" "Dutch" msgstr "" "_: keyboard\n" "Belanda" #: keyboard.pm:276 #, c-format msgid "" "_: keyboard\n" "Oriya" msgstr "" "_: keyboard\n" "Oriya" #: keyboard.pm:277 #, c-format msgid "" "_: keyboard\n" "Polish (qwerty layout)" msgstr "" "_: keyboard\n" "Polandia (layout qwerty)" #: keyboard.pm:278 #, c-format msgid "" "_: keyboard\n" "Polish (qwertz layout)" msgstr "" "_: keyboard\n" "Polandia (layout qwertz)" #: keyboard.pm:280 #, c-format msgid "" "_: keyboard\n" "Pashto" msgstr "" "_: keyboard\n" "Pashto" #: keyboard.pm:281 #, c-format msgid "" "_: keyboard\n" "Portuguese" msgstr "" "_: keyboard\n" "Portugis" #: keyboard.pm:283 #, c-format msgid "" "_: keyboard\n" "Canadian (Quebec)" msgstr "" "_: keyboard\n" "Kanada (Quebec)" #: keyboard.pm:285 #, c-format msgid "" "_: keyboard\n" "Romanian (qwertz)" msgstr "" "_: keyboard\n" "Romania (qwertz)" #: keyboard.pm:286 #, c-format msgid "" "_: keyboard\n" "Romanian (qwerty)" msgstr "" "_: keyboard\n" "Romania (qwerty)" #: keyboard.pm:288 #, c-format msgid "" "_: keyboard\n" "Russian (phonetic)" msgstr "" "_: keyboard\n" "Rusia (fonetik)" #: keyboard.pm:289 #, c-format msgid "" "_: keyboard\n" "Saami (norwegian)" msgstr "" "_: keyboard\n" "Saami (norwegia)" #: keyboard.pm:290 #, c-format msgid "" "_: keyboard\n" "Saami (swedish/finnish)" msgstr "" "_: keyboard\n" "Saami (Swedia/Finlandia)" #: keyboard.pm:292 #, c-format msgid "" "_: keyboard\n" "Sindhi" msgstr "" "_: keyboard\n" "Sindhi" #: keyboard.pm:294 #, c-format msgid "" "_: keyboard\n" "Slovenian" msgstr "" "_: keyboard\n" "Slovenia" #: keyboard.pm:295 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTZ)" msgstr "" "_: keyboard\n" "Slovakia (QWERTZ)" #: keyboard.pm:296 #, c-format msgid "" "_: keyboard\n" "Slovakian (QWERTY)" msgstr "" "_: keyboard\n" "Slovakia (QWERTY)" #: keyboard.pm:298 #, c-format msgid "" "_: keyboard\n" "Serbian (cyrillic)" msgstr "" "_: keyboard\n" "Serbia (cyrillic)" #: keyboard.pm:299 #, c-format msgid "" "_: keyboard\n" "Syriac" msgstr "" "_: keyboard\n" "Syria" #: keyboard.pm:300 #, c-format msgid "" "_: keyboard\n" "Syriac (phonetic)" msgstr "" "_: keyboard\n" "Syiria (fonetik)" #: keyboard.pm:301 #, c-format msgid "" "_: keyboard\n" "Telugu" msgstr "" "_: keyboard\n" "Telugu" #: keyboard.pm:303 #, c-format msgid "" "_: keyboard\n" "Tamil (ISCII-layout)" msgstr "" "_: keyboard\n" "Tamil (layout ISCII)" #: keyboard.pm:304 #, c-format msgid "" "_: keyboard\n" "Tamil (Typewriter-layout)" msgstr "" "_: keyboard\n" "Tamil (layout mesin ketik)" #: keyboard.pm:305 #, c-format msgid "" "_: keyboard\n" "Thai (Kedmanee)" msgstr "" "_: keyboard\n" "Thai (Kedmanee)" #: keyboard.pm:306 #, c-format msgid "" "_: keyboard\n" "Thai (TIS-820)" msgstr "" "_: keyboard\n" "Thai (TIS-820)" #: keyboard.pm:308 #, c-format msgid "" "_: keyboard\n" "Thai (Pattachote)" msgstr "" "_: keyboard\n" "Thai (Pattachote)" #: keyboard.pm:311 #, c-format msgid "" "_: keyboard\n" "Tifinagh (+latin/arabic)" msgstr "" "_: keyboard\n" "Tifinagh (+Latin/Arab)" #: keyboard.pm:313 #, c-format msgid "" "_: keyboard\n" "Tajik" msgstr "" "_: keyboard\n" "Tajik" #: keyboard.pm:315 #, c-format msgid "" "_: keyboard\n" "Turkmen" msgstr "" "_: keyboard\n" "Turkmenistan" #: keyboard.pm:316 #, c-format msgid "" "_: keyboard\n" "Turkish (traditional \"F\" model)" msgstr "" "_: keyboard\n" "Turki (model \"F\" tradisional)" #: keyboard.pm:317 #, c-format msgid "" "_: keyboard\n" "Turkish (modern \"Q\" model)" msgstr "" "_: keyboard\n" "Turki (model \"Q\" modern)" #: keyboard.pm:319 #, c-format msgid "" "_: keyboard\n" "Ukrainian" msgstr "" "_: keyboard\n" "Ukraina" #: keyboard.pm:322 #, c-format msgid "" "_: keyboard\n" "Urdu keyboard" msgstr "" "_: keyboard\n" "Keyboard Urdu" #: keyboard.pm:324 #, c-format msgid "US keyboard (international)" msgstr "Keyboard US (internasional)" #: keyboard.pm:325 #, c-format msgid "" "_: keyboard\n" "Uzbek (cyrillic)" msgstr "" "_: keyboard\n" "Uzbek (cyrillic)" #: keyboard.pm:327 #, c-format msgid "" "_: keyboard\n" "Vietnamese \"numeric row\" QWERTY" msgstr "" "_: keyboard\n" "Vietnam \"jumlah baris\" QWERTY" #: keyboard.pm:328 #, c-format msgid "" "_: keyboard\n" "Yugoslavian (latin)" msgstr "" "_: keyboard\n" "Yugoslavia (latin)" #: keyboard.pm:335 #, c-format msgid "Right Alt key" msgstr "Tombol Alt Kanan" #: keyboard.pm:336 #, c-format msgid "Both Shift keys simultaneously" msgstr "Kedua tombol Shift bersamaan" #: keyboard.pm:337 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Tombol Control dan Shift bersamaan" #: keyboard.pm:338 #, c-format msgid "CapsLock key" msgstr "Tombol CapsLock" #: keyboard.pm:339 #, c-format msgid "Shift and CapsLock keys simultaneously" msgstr "Tombol Shift dan CapsLock bersamaan" #: keyboard.pm:340 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Tombol Ctrl dan Alt bersamaan" #: keyboard.pm:341 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Tombol Alt dan Shift bersamaan" #: keyboard.pm:342 #, c-format msgid "\"Menu\" key" msgstr "Kunci \"Menu\"" #: keyboard.pm:343 #, c-format msgid "Left \"Windows\" key" msgstr "Kunci \"Windows\" kiri" #: keyboard.pm:344 #, c-format msgid "Right \"Windows\" key" msgstr "Kunci \"Windows\" kanan" #: keyboard.pm:345 #, c-format msgid "Both Control keys simultaneously" msgstr "Kedua kunci Control bersamaan" #: keyboard.pm:346 #, c-format msgid "Both Alt keys simultaneously" msgstr "Kedua kunci Alt bersamaan" #: keyboard.pm:347 #, fuzzy, c-format msgid "Left Shift key" msgstr "Kunci \"Windows\" kiri" #: keyboard.pm:348 #, c-format msgid "Right Shift key" msgstr "Kunci Shift kanan" #: keyboard.pm:349 #, c-format msgid "Left Alt key" msgstr "kunci Alt Kiri" #: keyboard.pm:350 #, c-format msgid "Left Control key" msgstr "Kunci Control kiri" #: keyboard.pm:351 #, c-format msgid "Right Control key" msgstr "Kunci Control kanan" #: keyboard.pm:387 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Di sini Anda dapat memilih kunci atau kombinasinya untuk \n" "berganti antar layout keyboard (mis: latin dan non latin)" #: keyboard.pm:392 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" "Setting ini akan diaktifkan setelah installasi. Selama\n" "installasi, Anda perlu menggunakan tombol Control \n" "kanan untuk berganti antar layout keyboard." #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:173 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:190 #, c-format msgid "Andorra" msgstr "Andorra" #: lang.pm:191 network/adsl_consts.pm:826 #, c-format msgid "United Arab Emirates" msgstr "Uni Emirat Arab" #: lang.pm:192 #, c-format msgid "Afghanistan" msgstr "Afghanistan" #: lang.pm:193 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua dan Barbuda" #: lang.pm:194 #, c-format msgid "Anguilla" msgstr "Anguilla" #: lang.pm:195 #, c-format msgid "Albania" msgstr "Albania" #: lang.pm:196 #, c-format msgid "Armenia" msgstr "Armenia" #: lang.pm:197 #, c-format msgid "Netherlands Antilles" msgstr "Belanda Antilles" #: lang.pm:198 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:199 #, c-format msgid "Antarctica" msgstr "Antartika" #: lang.pm:200 network/adsl_consts.pm:40 standalone/drakxtv:50 #, c-format msgid "Argentina" msgstr "Argentina" #: lang.pm:201 #, c-format msgid "American Samoa" msgstr "Samoa Amerika" #: lang.pm:203 standalone/drakxtv:48 #, c-format msgid "Australia" msgstr "Australia" #: lang.pm:204 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:205 #, c-format msgid "Azerbaijan" msgstr "Azerbaijan" #: lang.pm:206 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosnia Herzegovina" #: lang.pm:207 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:208 #, c-format msgid "Bangladesh" msgstr "Bangladesh" #: lang.pm:210 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:211 network/adsl_consts.pm:143 network/adsl_consts.pm:151 #, c-format msgid "Bulgaria" msgstr "Bulgaria" #: lang.pm:212 #, c-format msgid "Bahrain" msgstr "Bahrain" #: lang.pm:213 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:214 #, c-format msgid "Benin" msgstr "Benin" #: lang.pm:215 #, c-format msgid "Bermuda" msgstr "Bermuda" #: lang.pm:216 #, c-format msgid "Brunei Darussalam" msgstr "Brunei Darussalam" #: lang.pm:217 #, c-format msgid "Bolivia" msgstr "Bolivia" #: lang.pm:218 network/adsl_consts.pm:109 network/adsl_consts.pm:119 #: network/adsl_consts.pm:127 network/adsl_consts.pm:135 #, c-format msgid "Brazil" msgstr "Brazil" #: lang.pm:219 #, c-format msgid "Bahamas" msgstr "Bahama" #: lang.pm:220 #, c-format msgid "Bhutan" msgstr "Bhutan" #: lang.pm:221 #, c-format msgid "Bouvet Island" msgstr "Pulau Bouvet" #: lang.pm:222 #, c-format msgid "Botswana" msgstr "Botswana" #: lang.pm:223 #, c-format msgid "Belarus" msgstr "Belarus" #: lang.pm:224 #, c-format msgid "Belize" msgstr "Belize" #: lang.pm:225 #, c-format msgid "Canada" msgstr "Kanada" #: lang.pm:226 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kepulauan Cocos (Keeling)" #: lang.pm:227 #, c-format msgid "Congo (Kinshasa)" msgstr "Congo (Kinshasa)" #: lang.pm:228 #, c-format msgid "Central African Republic" msgstr "Republik Afrika Tengah" #: lang.pm:229 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongo (Brazzaville)" #: lang.pm:231 #, c-format msgid "Cote d'Ivoire" msgstr "Pantai Gading" #: lang.pm:232 #, c-format msgid "Cook Islands" msgstr "Kepulauan Cook" #: lang.pm:233 #, c-format msgid "Chile" msgstr "Chile" #: lang.pm:234 #, c-format msgid "Cameroon" msgstr "Kamerun" #: lang.pm:235 network/adsl_consts.pm:159 network/adsl_consts.pm:167 #: network/adsl_consts.pm:175 network/adsl_consts.pm:183 #: network/adsl_consts.pm:191 network/adsl_consts.pm:199 #: network/adsl_consts.pm:207 network/adsl_consts.pm:215 #: network/adsl_consts.pm:223 network/adsl_consts.pm:231 #: network/adsl_consts.pm:239 network/adsl_consts.pm:247 #: network/adsl_consts.pm:255 network/adsl_consts.pm:263 #: network/adsl_consts.pm:271 network/adsl_consts.pm:279 #: network/adsl_consts.pm:287 network/adsl_consts.pm:295 #: network/adsl_consts.pm:303 network/adsl_consts.pm:311 #, c-format msgid "China" msgstr "Cina" #: lang.pm:236 #, c-format msgid "Colombia" msgstr "Colombia" #: lang.pm:238 #, c-format msgid "Serbia & Montenegro" msgstr "Serbia & Montenegro" #: lang.pm:239 #, c-format msgid "Cuba" msgstr "Kuba" #: lang.pm:240 #, c-format msgid "Cape Verde" msgstr "Tanjung Verde" #: lang.pm:241 #, c-format msgid "Christmas Island" msgstr "Pulau Christmas" #: lang.pm:242 #, c-format msgid "Cyprus" msgstr "Kipros" #: lang.pm:245 #, c-format msgid "Djibouti" msgstr "Jibouti" #: lang.pm:246 network/adsl_consts.pm:327 #, c-format msgid "Denmark" msgstr "Denmark" #: lang.pm:247 #, c-format msgid "Dominica" msgstr "Dominika" #: lang.pm:248 #, c-format msgid "Dominican Republic" msgstr "Republik Dominika" #: lang.pm:249 network/adsl_consts.pm:30 #, c-format msgid "Algeria" msgstr "Aljazair" #: lang.pm:250 #, c-format msgid "Ecuador" msgstr "Ekuador" #: lang.pm:251 #, c-format msgid "Estonia" msgstr "Estonia" #: lang.pm:252 #, c-format msgid "Egypt" msgstr "Mesir" #: lang.pm:253 #, c-format msgid "Western Sahara" msgstr "Sahara Barat" #: lang.pm:254 #, c-format msgid "Eritrea" msgstr "Eritrea" #: lang.pm:255 network/adsl_consts.pm:663 network/adsl_consts.pm:672 #: network/adsl_consts.pm:682 network/adsl_consts.pm:692 #: network/adsl_consts.pm:700 network/adsl_consts.pm:708 #: network/adsl_consts.pm:716 network/adsl_consts.pm:724 #: network/adsl_consts.pm:732 network/adsl_consts.pm:740 #: network/adsl_consts.pm:748 network/adsl_consts.pm:756 #: network/adsl_consts.pm:764 #, c-format msgid "Spain" msgstr "Spanyol" #: lang.pm:256 #, c-format msgid "Ethiopia" msgstr "Ethiopia" #: lang.pm:257 network/adsl_consts.pm:335 #, c-format msgid "Finland" msgstr "Finlandia" #: lang.pm:258 #, c-format msgid "Fiji" msgstr "Fiji" #: lang.pm:259 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Kepulauan Malvinas" #: lang.pm:260 #, c-format msgid "Micronesia" msgstr "Mikronesia" #: lang.pm:261 #, c-format msgid "Faroe Islands" msgstr "Kepulauan Faroe" #: lang.pm:263 #, c-format msgid "Gabon" msgstr "Gabon" #: lang.pm:264 network/adsl_consts.pm:836 network/adsl_consts.pm:846 #: network/netconnect.pm:52 #, c-format msgid "United Kingdom" msgstr "Inggris" #: lang.pm:265 #, c-format msgid "Grenada" msgstr "Grenada" #: lang.pm:266 #, c-format msgid "Georgia" msgstr "Grujia" #: lang.pm:267 #, c-format msgid "French Guiana" msgstr "Guiana Perancis" #: lang.pm:268 #, c-format msgid "Ghana" msgstr "Ghana" #: lang.pm:269 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: lang.pm:270 #, c-format msgid "Greenland" msgstr "Greenland" #: lang.pm:271 #, c-format msgid "Gambia" msgstr "Gambia" #: lang.pm:272 #, c-format msgid "Guinea" msgstr "Guinea" #: lang.pm:273 #, c-format msgid "Guadeloupe" msgstr "Guadeloupe" #: lang.pm:274 #, c-format msgid "Equatorial Guinea" msgstr "Guinea Equator" #: lang.pm:276 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Georgia Selatan dan Pulau Sandwich Selatan" #: lang.pm:277 #, c-format msgid "Guatemala" msgstr "Guatemala" #: lang.pm:278 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:279 #, c-format msgid "Guinea-Bissau" msgstr "Guinea-Bissau" #: lang.pm:280 #, c-format msgid "Guyana" msgstr "Guyana" #: lang.pm:281 #, c-format msgid "Hong Kong SAR (China)" msgstr "Hong Kong SAR (Cina)" #: lang.pm:282 #, c-format msgid "Heard and McDonald Islands" msgstr "Kepulauan Heard dan McDonald" #: lang.pm:283 #, c-format msgid "Honduras" msgstr "Honduras" #: lang.pm:284 #, c-format msgid "Croatia" msgstr "Kroasia" #: lang.pm:285 #, c-format msgid "Haiti" msgstr "Haiti" #: lang.pm:287 #, c-format msgid "Indonesia" msgstr "Indonesia" #: lang.pm:288 network/adsl_consts.pm:471 standalone/drakxtv:47 #, c-format msgid "Ireland" msgstr "Irlandia" #: lang.pm:289 network/adsl_consts.pm:479 #, c-format msgid "Israel" msgstr "Israel" #: lang.pm:290 #, c-format msgid "India" msgstr "India" #: lang.pm:291 #, c-format msgid "British Indian Ocean Territory" msgstr "Inggris Teritori Samudera India" #: lang.pm:292 #, c-format msgid "Iraq" msgstr "Iraq" #: lang.pm:293 #, c-format msgid "Iran" msgstr "Iran" #: lang.pm:294 #, c-format msgid "Iceland" msgstr "Islandia" #: lang.pm:296 #, c-format msgid "Jamaica" msgstr "Jamaika" #: lang.pm:297 #, c-format msgid "Jordan" msgstr "Jordania" #: lang.pm:298 #, c-format msgid "Japan" msgstr "Jepang" #: lang.pm:299 #, c-format msgid "Kenya" msgstr "Kenya" #: lang.pm:300 #, c-format msgid "Kyrgyzstan" msgstr "Kirgiztan" #: lang.pm:301 #, c-format msgid "Cambodia" msgstr "Kamboja" #: lang.pm:302 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:303 #, c-format msgid "Comoros" msgstr "Comoros" #: lang.pm:304 #, c-format msgid "Saint Kitts and Nevis" msgstr "Santa Kitts dan Nevis" #: lang.pm:305 #, c-format msgid "Korea (North)" msgstr "Korea (Utara)" #: lang.pm:306 #, c-format msgid "Korea" msgstr "Korea" #: lang.pm:307 #, c-format msgid "Kuwait" msgstr "Kuwait" #: lang.pm:308 #, c-format msgid "Cayman Islands" msgstr "Pulau Cayman" #: lang.pm:309 #, c-format msgid "Kazakhstan" msgstr "Kazakhstan" #: lang.pm:310 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:311 #, c-format msgid "Lebanon" msgstr "Libanon" #: lang.pm:312 #, c-format msgid "Saint Lucia" msgstr "Santa Lucia" #: lang.pm:313 #, c-format msgid "Liechtenstein" msgstr "Liechtenstein" #: lang.pm:314 #, c-format msgid "Sri Lanka" msgstr "Sri Lanka" #: lang.pm:315 #, c-format msgid "Liberia" msgstr "Liberia" #: lang.pm:316 #, c-format msgid "Lesotho" msgstr "Lesotho" #: lang.pm:317 network/adsl_consts.pm:527 #, c-format msgid "Lithuania" msgstr "Lithuania" #: lang.pm:318 #, c-format msgid "Luxembourg" msgstr "Luxemburg" #: lang.pm:319 #, c-format msgid "Latvia" msgstr "Latvia" #: lang.pm:320 #, c-format msgid "Libya" msgstr "Libya" #: lang.pm:321 network/adsl_consts.pm:535 #, c-format msgid "Morocco" msgstr "Maroko" #: lang.pm:322 #, c-format msgid "Monaco" msgstr "Monako" #: lang.pm:323 #, c-format msgid "Moldova" msgstr "Moldova" #: lang.pm:324 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: lang.pm:325 #, c-format msgid "Marshall Islands" msgstr "Kepulauan Marshall" #: lang.pm:326 #, c-format msgid "Macedonia" msgstr "Macedonia" #: lang.pm:327 #, c-format msgid "Mali" msgstr "Mali" #: lang.pm:328 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:329 #, c-format msgid "Mongolia" msgstr "Mongolia" #: lang.pm:330 #, c-format msgid "Northern Mariana Islands" msgstr "Kepulauan Mariana Utara" #: lang.pm:331 #, c-format msgid "Martinique" msgstr "Martinique" #: lang.pm:332 #, c-format msgid "Mauritania" msgstr "Mauritania" #: lang.pm:333 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:334 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:335 #, c-format msgid "Mauritius" msgstr "Mauritius" #: lang.pm:336 #, c-format msgid "Maldives" msgstr "Maladewa" #: lang.pm:337 #, c-format msgid "Malawi" msgstr "Malawi" #: lang.pm:338 #, c-format msgid "Mexico" msgstr "Meksiko" #: lang.pm:339 #, c-format msgid "Malaysia" msgstr "Malaysia" #: lang.pm:340 #, c-format msgid "Mozambique" msgstr "Mozambique" #: lang.pm:341 #, c-format msgid "Namibia" msgstr "Namibia" #: lang.pm:342 #, c-format msgid "New Caledonia" msgstr "Caledonia Baru" #: lang.pm:343 #, c-format msgid "Niger" msgstr "Niger" #: lang.pm:344 #, c-format msgid "Norfolk Island" msgstr "Kepulauan Norfolk" #: lang.pm:345 #, c-format msgid "Nigeria" msgstr "Nigeria" #: lang.pm:346 #, c-format msgid "Nicaragua" msgstr "Nicaragua" #: lang.pm:349 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:350 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:351 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:352 #, c-format msgid "New Zealand" msgstr "New Zealand" #: lang.pm:353 #, c-format msgid "Oman" msgstr "Oman" #: lang.pm:354 #, c-format msgid "Panama" msgstr "Panama" #: lang.pm:355 #, c-format msgid "Peru" msgstr "Peru" #: lang.pm:356 #, c-format msgid "French Polynesia" msgstr "Polinesia Perancis" #: lang.pm:357 #, c-format msgid "Papua New Guinea" msgstr "Papua New Guinea" #: lang.pm:358 #, c-format msgid "Philippines" msgstr "Filipina" #: lang.pm:359 #, c-format msgid "Pakistan" msgstr "Pakistan" #: lang.pm:361 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Santa Pierre dan Miquelon" #: lang.pm:362 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:363 #, c-format msgid "Puerto Rico" msgstr "Puerto Rico" #: lang.pm:364 #, c-format msgid "Palestine" msgstr "Palestina" #: lang.pm:365 network/adsl_consts.pm:634 #, c-format msgid "Portugal" msgstr "Portugis" #: lang.pm:366 #, c-format msgid "Paraguay" msgstr "Paraguay" #: lang.pm:367 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:368 #, c-format msgid "Qatar" msgstr "Qatar" #: lang.pm:369 #, c-format msgid "Reunion" msgstr "Reunion" #: lang.pm:370 #, c-format msgid "Romania" msgstr "Romania" #: lang.pm:371 network/adsl_consts.pm:642 #, c-format msgid "Russia" msgstr "Rusia" #: lang.pm:372 #, c-format msgid "Rwanda" msgstr "Rwanda" #: lang.pm:373 #, c-format msgid "Saudi Arabia" msgstr "Arab Saudi" #: lang.pm:374 #, c-format msgid "Solomon Islands" msgstr "Pulau Sulaiman" #: lang.pm:375 #, c-format msgid "Seychelles" msgstr "Seychelles" #: lang.pm:376 #, c-format msgid "Sudan" msgstr "Sudan" #: lang.pm:378 #, c-format msgid "Singapore" msgstr "Singapura" #: lang.pm:379 #, c-format msgid "Saint Helena" msgstr "Santa Helena" #: lang.pm:380 network/adsl_consts.pm:652 #, c-format msgid "Slovenia" msgstr "Slovenia" #: lang.pm:381 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Kepulauan Svalbard dan Jan Mayen" #: lang.pm:383 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: lang.pm:384 #, c-format msgid "San Marino" msgstr "San Marino" #: lang.pm:385 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:386 #, c-format msgid "Somalia" msgstr "Somalia" #: lang.pm:387 #, c-format msgid "Suriname" msgstr "Suriname" #: lang.pm:388 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome dan Principe" #: lang.pm:389 #, c-format msgid "El Salvador" msgstr "El Salvador" #: lang.pm:390 #, c-format msgid "Syria" msgstr "Syria" #: lang.pm:391 #, c-format msgid "Swaziland" msgstr "Swaziland" #: lang.pm:392 #, c-format msgid "Turks and Caicos Islands" msgstr "Kepulauan Turks dan Caicos" #: lang.pm:393 #, c-format msgid "Chad" msgstr "Chad" #: lang.pm:394 #, c-format msgid "French Southern Territories" msgstr "Perancis, Teritori Selatan" #: lang.pm:395 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:396 network/adsl_consts.pm:806 #, c-format msgid "Thailand" msgstr "Thailand" #: lang.pm:397 #, c-format msgid "Tajikistan" msgstr "Tajikistan" #: lang.pm:398 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:399 #, c-format msgid "East Timor" msgstr "Timor Timur" #: lang.pm:400 #, c-format msgid "Turkmenistan" msgstr "Turkmenistan" #: lang.pm:401 network/adsl_consts.pm:816 #, c-format msgid "Tunisia" msgstr "Tunisia" #: lang.pm:402 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:403 #, c-format msgid "Turkey" msgstr "Turki" #: lang.pm:404 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad dan Tobago" #: lang.pm:405 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:407 #, c-format msgid "Tanzania" msgstr "Tanzania" #: lang.pm:408 #, c-format msgid "Ukraine" msgstr "Ukraina" #: lang.pm:409 #, c-format msgid "Uganda" msgstr "Uganda" #: lang.pm:410 #, c-format msgid "United States Minor Outlying Islands" msgstr "Amerika Serikat, kepulauan Luar Minor" #: lang.pm:412 #, c-format msgid "Uruguay" msgstr "Uruguay" #: lang.pm:413 #, c-format msgid "Uzbekistan" msgstr "Uzbekistan" #: lang.pm:414 #, c-format msgid "Vatican" msgstr "Vatikan" #: lang.pm:415 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Santa Vincent dan Grenadin" #: lang.pm:416 #, c-format msgid "Venezuela" msgstr "Venezuela" #: lang.pm:417 #, c-format msgid "Virgin Islands (British)" msgstr "Kepulauan Virgin (Inggris)" #: lang.pm:418 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Virgin Islands (Amerika)" #: lang.pm:419 #, c-format msgid "Vietnam" msgstr "Vietnam" #: lang.pm:420 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:421 #, c-format msgid "Wallis and Futuna" msgstr "Wallis dan Futuna" #: lang.pm:422 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:423 #, c-format msgid "Yemen" msgstr "Yaman" #: lang.pm:424 #, c-format msgid "Mayotte" msgstr "Mayotte" #: lang.pm:425 standalone/drakxtv:49 #, c-format msgid "South Africa" msgstr "Afrika Selatan" #: lang.pm:426 #, c-format msgid "Zambia" msgstr "Zambia" #: lang.pm:427 #, c-format msgid "Zimbabwe" msgstr "Zimbabwe" #: lang.pm:1040 #, c-format msgid "You should install the following packages: %s" msgstr "Anda harus menginstall paket berikut: %s" #. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit" #: lang.pm:1043 standalone/scannerdrake:135 #, c-format msgid ", " msgstr ", " #: lang.pm:1094 #, c-format msgid "Welcome to %s" msgstr "Selamat Datang di %s" #: loopback.pm:31 #, c-format msgid "Circular mounts %s\n" msgstr "Mount melingkar %s\n" #: lvm.pm:111 #, c-format msgid "Remove the logical volumes first\n" msgstr "Hapus volume logical dahulu\n" #: modules/interactive.pm:21 standalone/drakconnect:1032 #, c-format msgid "Parameters" msgstr "Parameter" #: modules/interactive.pm:21 standalone/draksec:51 #, c-format msgid "NONE" msgstr "TIDAK ADA" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Konfigurasi modul" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Anda bisa mengkonfigurasi setiap parameter modul disini." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Ditemukan %s antarmuka" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Apakah Anda punya lagi?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Apakah Anda memiliki antarmuka %s?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Lihat info hardware" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "Menginstal driver untuk pengontrol USB" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "Menginstal driver untuk pengontrol firewire %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "Menginstal driver untuk pengontrol hard disk %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "Menginstal driver untuk pengontrol ethernet %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Menginstal driver untuk kartu %s %s" #: modules/interactive.pm:99 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: modules/interactive.pm:109 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Anda bisa memberikan opsi untuk modul %s.\n" "Perhatikan bahwa alamat harus diawali dengan awalan 0x misalnya '0x123'" #: modules/interactive.pm:115 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Anda bisa memberikan opsi untuk modul %s.\n" "Opsi umumnya memiliki format ``nama=nilai nama2=nilai2...''.\n" "Misalnya, ``io=0x300 irq=7''" #: modules/interactive.pm:117 #, c-format msgid "Module options:" msgstr "Opsi Modul:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:130 #, c-format msgid "Which %s driver should I try?" msgstr "Driver %s mana yang harus saya coba?" #: modules/interactive.pm:139 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Pada beberapa kasus, driver %s perlu informasi tambahan agar dapat\n" "bekerja normal meskipun tetap bisa tanpa informasi tambahan. Apakah\n" "Anda ingin memberikan parameter tambahan atau mengijinkan driver\n" "mendeteksi komputer untuk informasi yang diperlukannya? Biasanya\n" "pendeteksian bisa membuat komputer hang, tetapi tidak merusak." #: modules/interactive.pm:143 #, c-format msgid "Autoprobe" msgstr "Probe otomatis" #: modules/interactive.pm:143 #, c-format msgid "Specify options" msgstr "Tentukan opsi" #: modules/interactive.pm:155 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Pemuatan modul %s gagal.\n" "Apakah Anda mau mencoba dengan parameter yang lain?" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "nomor" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d bilangan terpisah koma" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "%d string terpisah koma" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "bilangan terpisah koma" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "string terpisah koma" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Mouse Sun" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Standar" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Mouse PS2 roda generik" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 #: network/modem.pm:137 network/netconnect.pm:645 network/netconnect.pm:650 #: network/netconnect.pm:662 network/netconnect.pm:667 #: network/netconnect.pm:683 network/netconnect.pm:685 #, c-format msgid "Automatic" msgstr "Otomatis" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 tombol" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Mouse Generik 2 Tombol" #: mouse.pm:50 mouse.pm:59 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Mouse Generik 3 Tombol dengan emulasi roda" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Roda" #: mouse.pm:55 #, c-format msgid "serial" msgstr "serial" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Mouse Generik 3 Tombol" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan dengan emulasi roda" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Sistem Mouse" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Seri Logitech CC" #: mouse.pm:66 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Seri Logitech CC dengan emulasi roda" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "Seri MM" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serial, tipe C7 lama)" #: mouse.pm:72 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (serial, tipe C7 lama) dengan emulasi roda" #: mouse.pm:74 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse dengan emulasi roda" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmouse" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "2 tombol" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "3 tombol" #: mouse.pm:82 #, c-format msgid "3 buttons with Wheel emulation" msgstr "3 tombol dengan emulasi roda" #: mouse.pm:86 #, c-format msgid "Universal" msgstr "Universal" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "Sembarang mouse PS/2 & USB" #: mouse.pm:89 #, c-format msgid "Microsoft Xbox Controller S" msgstr "Pengontrol S Xbox Microsoft" #: mouse.pm:89 mouse.pm:359 mouse.pm:368 mouse.pm:420 #, c-format msgid "Synaptics Touchpad" msgstr "Synaptics Touchpad" #: mouse.pm:93 standalone/drakconnect:360 standalone/drakvpn:1140 #, c-format msgid "none" msgstr "tidak ada" #: mouse.pm:95 #, c-format msgid "No mouse" msgstr "Tanpa mouse" #: mouse.pm:546 #, c-format msgid "Please test the mouse" msgstr "Silakan uji mouse Anda" #: mouse.pm:548 #, c-format msgid "To activate the mouse," msgstr "Untuk mengaktifkan mouse," #: mouse.pm:549 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "GERAKKAN RODANYA!" #: network/adsl.pm:19 #, c-format msgid "use PPPoE" msgstr "gunakan PPPoE" #: network/adsl.pm:20 #, c-format msgid "use PPTP" msgstr "gunakan PPTP" #: network/adsl.pm:21 #, c-format msgid "use DHCP" msgstr "gunakan DHCP" #: network/adsl.pm:22 #, c-format msgid "Alcatel Speedtouch USB" msgstr "USB speedtouch Alcatel" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, c-format msgid " - detected" msgstr " - terdeteksi" #: network/adsl.pm:23 #, c-format msgid "Sagem (using PPPoA) USB" msgstr "USB Sagem (menggunakan PPPoA)" #: network/adsl.pm:24 #, c-format msgid "Sagem (using DHCP) USB" msgstr "USB Sagem (menggunakan DHCP)" #: network/adsl.pm:35 network/netconnect.pm:839 #, c-format msgid "Connect to the Internet" msgstr "Hubungan ke Internet" #: network/adsl.pm:36 network/netconnect.pm:840 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use PPTP, a few use DHCP.\n" "If you do not know, choose 'use PPPoE'" msgstr "" "Cara yang umum untuk terkoneksi ke adsl adalah \n" "dengan menggunakan pppoe. Namun ada juga yang \n" "menggunakan PPTP, dan ada yang pakai dhcp.\n" "Bila Anda tidak tahu, pilih 'gunakan PPPoE'" #: network/adsl.pm:41 network/netconnect.pm:844 #, c-format msgid "ADSL connection type:" msgstr "Tipe koneksi ADSL:" #: network/drakfirewall.pm:12 share/compssUsers.pl:84 #, c-format msgid "Web Server" msgstr "Server Web" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Server Nama Domain" #: network/drakfirewall.pm:22 #, c-format msgid "SSH server" msgstr "Server SSH" #: network/drakfirewall.pm:27 #, c-format msgid "FTP server" msgstr "Server FTP" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Server Mail" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "Server POP dan IMAP" #: network/drakfirewall.pm:42 #, c-format msgid "Telnet server" msgstr "Server Telnet" #: network/drakfirewall.pm:48 #, c-format msgid "Windows Files Sharing (SMB)" msgstr "Windows Files Sharing (SMB)" #: network/drakfirewall.pm:54 #, c-format msgid "CUPS server" msgstr "Server CUPS" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "Permintaan echo (ping)" #: network/drakfirewall.pm:65 #, c-format msgid "BitTorrent" msgstr "BitTorrent" #: network/drakfirewall.pm:131 #, c-format msgid "No network card" msgstr "Tidak ada kartu jaringan" #: network/drakfirewall.pm:152 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrakelinux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "konfigurator drakfirewall\n" "\n" "Program ini mengkonfigurasi firewall pribadi untuk Mandrakelinux.\n" "Untuk membuat solusi firewall yang lebih baik, cobalah\n" "distribusi khusus MandrakeSecurity Firewall" #: network/drakfirewall.pm:158 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "konfigurator drakfirewall\n" "\n" "Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet\n" "dengan drakconnect sebelum melanjutkan." #: network/drakfirewall.pm:175 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Layanan apa yang akan Anda ijinkan untuk diakses dari Internet?" #: network/drakfirewall.pm:176 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Have a look at /etc/services for information." msgstr "" "Anda dapat memasukkan berbagai port. \n" "Contoh valid misalnya: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n" "Lihat pada /etc/services untuk informasinya." #: network/drakfirewall.pm:182 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Port yang diberikan tidak valid: %s.\n" "Format yang benar adalah \"port/tcp\" atau \"port/udp\", \n" "dimana port antara 1 dan 65535.\n" "\n" "Anda bisa memberikan jangkauan port (mis: 24300:24350/udp)" #: network/drakfirewall.pm:192 #, c-format msgid "Everything (no firewall)" msgstr "Semua (tanpa firewall)" #: network/drakfirewall.pm:194 #, c-format msgid "Other ports" msgstr "Port lain" #: network/isdn.pm:125 network/netconnect.pm:490 network/netconnect.pm:602 #: network/netconnect.pm:605 #, c-format msgid "Unlisted - edit manually" msgstr "Tidak terdaftar - edit manual" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:168 network/netconnect.pm:422 #, c-format msgid "I do not know" msgstr "Saya tidak tahu" #: network/isdn.pm:169 network/netconnect.pm:422 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:170 network/netconnect.pm:422 #, c-format msgid "USB" msgstr "USB" #: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 #: network/netconnect.pm:650 network/netconnect.pm:667 #: network/netconnect.pm:683 #, c-format msgid "Manual" msgstr "Manual" #: network/netconnect.pm:90 network/netconnect.pm:519 #: network/netconnect.pm:523 #, c-format msgid "Manual choice" msgstr "Pilihan manual" #: network/netconnect.pm:90 #, c-format msgid "Internal ISDN card" msgstr "Kartu ISDN internal" #: network/netconnect.pm:100 #, c-format msgid "Ad-hoc" msgstr "Ad-hoc" #: network/netconnect.pm:101 #, c-format msgid "Managed" msgstr "Terkelola" #: network/netconnect.pm:102 #, c-format msgid "Master" msgstr "Master" #: network/netconnect.pm:103 #, c-format msgid "Repeater" msgstr "Repeater" #: network/netconnect.pm:104 #, c-format msgid "Secondary" msgstr "Kedua" #: network/netconnect.pm:105 #, c-format msgid "Auto" msgstr "Automatis" #: network/netconnect.pm:108 printer/printerdrake.pm:1354 #: standalone/drakups:75 #, c-format msgid "Manual configuration" msgstr "Konfigurasi manual" #: network/netconnect.pm:109 #, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "IP otomatis (BOOTP/DHCP)" #: network/netconnect.pm:111 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "IP otomatis (BOOTP/DHCP/Zeroconf)" #: network/netconnect.pm:114 #, c-format msgid "Protocol for the rest of the world" msgstr "Protokol luntuk yang ain" #: network/netconnect.pm:116 standalone/drakconnect:541 #, c-format msgid "European protocol (EDSS1)" msgstr "Protokol Eropa (EDSS1)" #: network/netconnect.pm:117 standalone/drakconnect:542 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protokol untuk yang lain \n" " tanpa D-Channel (leased lines)" #: network/netconnect.pm:153 #, c-format msgid "Alcatel speedtouch USB modem" msgstr "Modem USB speedtouch Alcatel" #: network/netconnect.pm:154 #, c-format msgid "Sagem USB modem" msgstr "Modem USB Sagem" #: network/netconnect.pm:155 #, c-format msgid "Bewan modem" msgstr "Modem Bewan" #: network/netconnect.pm:156 #, c-format msgid "ECI Hi-Focus modem" msgstr "Modem Hi-Focus ECI" #: network/netconnect.pm:160 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "Dynamic Host Configuration Protocol (DHCP)" #: network/netconnect.pm:161 #, c-format msgid "Manual TCP/IP configuration" msgstr "Konfigurasi TCP/IP manual" #: network/netconnect.pm:162 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "Point to Point Tunneling Protocol (PPTP)" #: network/netconnect.pm:163 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "PPP over Ethernet (PPPoE)" #: network/netconnect.pm:164 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "PPP over ATM (PPPoA)" #: network/netconnect.pm:165 #, c-format msgid "DSL over CAPI" msgstr "DSL over CAPI" #: network/netconnect.pm:169 #, c-format msgid "Bridged Ethernet LLC" msgstr "Ethernet LLC dengan Bridge" #: network/netconnect.pm:170 #, c-format msgid "Bridged Ethernet VC" msgstr "Ethernet VC dengan Bridge" #: network/netconnect.pm:171 #, c-format msgid "Routed IP LLC" msgstr "Routed IP LLC" #: network/netconnect.pm:172 #, c-format msgid "Routed IP VC" msgstr "Routed IP VC" #: network/netconnect.pm:173 #, c-format msgid "PPPoA LLC" msgstr "PPPoA LLC" #: network/netconnect.pm:174 #, c-format msgid "PPPoA VC" msgstr "PPPoA VC" #: network/netconnect.pm:178 standalone/drakconnect:476 #, c-format msgid "Script-based" msgstr "Berbasis-script" #: network/netconnect.pm:179 standalone/drakconnect:476 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:180 standalone/drakconnect:476 #, c-format msgid "Terminal-based" msgstr "Berbasis-terminal" #: network/netconnect.pm:181 standalone/drakconnect:476 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:182 standalone/drakconnect:476 #, c-format msgid "PAP/CHAP" msgstr "PAP/CHAP" #: network/netconnect.pm:238 standalone/drakconnect:59 #, c-format msgid "Network & Internet Configuration" msgstr "Konfigurasi Jaringan & Internet" #: network/netconnect.pm:244 #, c-format msgid "(detected on port %s)" msgstr "(terdeteksi pada port %s)" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:246 #, c-format msgid "(detected %s)" msgstr "(terdeteksi %s)" #: network/netconnect.pm:246 #, c-format msgid "(detected)" msgstr "(terdeteksi)" #: network/netconnect.pm:248 #, c-format msgid "Modem connection" msgstr "Koneksi modem" #: network/netconnect.pm:249 #, c-format msgid "ISDN connection" msgstr "Koneksi ISDN" #: network/netconnect.pm:250 #, c-format msgid "ADSL connection" msgstr "Koneksi ADSL" #: network/netconnect.pm:251 #, c-format msgid "Cable connection" msgstr "Konfigurasi jaringan kabel" #: network/netconnect.pm:252 #, c-format msgid "LAN connection" msgstr "koneksi LAN" #: network/netconnect.pm:253 network/netconnect.pm:267 #, c-format msgid "Wireless connection" msgstr "Konfigurasi jaringan nirkabel" #: network/netconnect.pm:263 #, c-format msgid "Choose the connection you want to configure" msgstr "Pilih koneksi yang hendak Anda konfigurasi" #: network/netconnect.pm:277 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "Kita akan mengkonfigurasi koneksi %s.\n" "\n" "\n" "Tekan \"%s\" untuk melanjutkan." #: network/netconnect.pm:285 network/netconnect.pm:879 #, c-format msgid "Connection Configuration" msgstr "Konfigurasi Koneksi" #: network/netconnect.pm:286 network/netconnect.pm:880 #, c-format msgid "Please fill or check the field below" msgstr "Silakan isi atau tandai kolom berikut" #: network/netconnect.pm:293 standalone/drakconnect:532 #, c-format msgid "Card IRQ" msgstr "IRQ kartu" #: network/netconnect.pm:294 standalone/drakconnect:533 #, c-format msgid "Card mem (DMA)" msgstr "Mem kartu (DMA)" #: network/netconnect.pm:295 standalone/drakconnect:534 #, c-format msgid "Card IO" msgstr "IO kartu" #: network/netconnect.pm:296 standalone/drakconnect:535 #, c-format msgid "Card IO_0" msgstr "IO_0 kartu" #: network/netconnect.pm:297 #, c-format msgid "Card IO_1" msgstr "IO_1 kartu" #: network/netconnect.pm:298 #, c-format msgid "Your personal phone number" msgstr "Nomor telepon pribadi Anda" #: network/netconnect.pm:299 network/netconnect.pm:883 #, c-format msgid "Provider name (ex provider.net)" msgstr "Nama provider (misalnya provider.net.id)" #: network/netconnect.pm:300 standalone/drakconnect:471 #, c-format msgid "Provider phone number" msgstr "Nomor telepon provider" #: network/netconnect.pm:301 #, c-format msgid "Provider DNS 1 (optional)" msgstr "DNS Provider 1 (opsional)" #: network/netconnect.pm:302 #, c-format msgid "Provider DNS 2 (optional)" msgstr "DNS Provider 2 (opsional)" #: network/netconnect.pm:303 standalone/drakconnect:422 #, c-format msgid "Dialing mode" msgstr "Mode dial" #: network/netconnect.pm:304 standalone/drakconnect:427 #: standalone/drakconnect:495 #, c-format msgid "Connection speed" msgstr "Kecepatan koneksi" #: network/netconnect.pm:305 standalone/drakconnect:432 #, c-format msgid "Connection timeout (in sec)" msgstr "Timeout koneksi (dalam detik)" #: network/netconnect.pm:308 network/netconnect.pm:329 #: network/netconnect.pm:886 standalone/drakconnect:469 #, c-format msgid "Account Login (user name)" msgstr "Login Account (nama pengguna)" #: network/netconnect.pm:309 network/netconnect.pm:330 #: network/netconnect.pm:887 standalone/drakconnect:470 #, c-format msgid "Account Password" msgstr "Katasandi Account" #: network/netconnect.pm:325 #, c-format msgid "Cable: account options" msgstr "Kabel: opsi account" #: network/netconnect.pm:328 #, c-format msgid "Use BPALogin (needed for Telstra)" msgstr "Gunakan BPALogin (diperlukan untuk Telstra)" #: network/netconnect.pm:362 network/netconnect.pm:715 #: network/netconnect.pm:920 #, c-format msgid "Select the network interface to configure:" msgstr "Pilih interface jaringan yang akan dikonfigurasi:" #: network/netconnect.pm:364 network/netconnect.pm:412 #: network/netconnect.pm:716 network/netconnect.pm:922 #: network/netconnect.pm:1091 network/shorewall.pm:98 #: standalone/drakconnect:684 standalone/drakgw:224 standalone/drakvpn:221 #, c-format msgid "Net Device" msgstr "Device Net" #: network/netconnect.pm:365 network/netconnect.pm:373 #, c-format msgid "External ISDN modem" msgstr "Modem ISDN external" #: network/netconnect.pm:411 standalone/harddrake2:210 #, c-format msgid "Select a device!" msgstr "Pilih sebuah divais!" #: network/netconnect.pm:420 network/netconnect.pm:430 #: network/netconnect.pm:440 network/netconnect.pm:473 #: network/netconnect.pm:487 #, c-format msgid "ISDN Configuration" msgstr "Konfigurasi ISDN" #: network/netconnect.pm:421 #, c-format msgid "What kind of card do you have?" msgstr "Tipe card mana yang Anda miliki?" #: network/netconnect.pm:431 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Bila Anda memiliki kartu ISA, nilai pada layar berikutnya seharusnya " "sudah benar.\n" "\n" "Bila Anda punya card PCMCIA, Anda harus mengetahui irq dan io kartu Anda " "itu.\n" #: network/netconnect.pm:435 #, c-format msgid "Continue" msgstr "Lanjutkan" #: network/netconnect.pm:435 #, c-format msgid "Abort" msgstr "Batal" #: network/netconnect.pm:441 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Mana yang merupakan kartu ISDN Anda?" #: network/netconnect.pm:459 #, c-format msgid "" "A CAPI driver is available for this modem. This CAPI driver can offer more " "capabilities than the free driver (like sending faxes). Which driver do you " "want to use?" msgstr "" "Driver CAPI tersedia untuk modem ini. Driver CAPI ini bisa menawarkan " "kemampuan lebih dari driver gratis (seperti mengirimkan fax). Driver " "mana yang hendak Anda gunakan" #: network/netconnect.pm:461 standalone/drakconnect:116 standalone/drakups:247 #: standalone/harddrake2:131 #, c-format msgid "Driver" msgstr "Driver" #: network/netconnect.pm:473 #, c-format msgid "Which protocol do you want to use?" msgstr "Protokol apa yang ingin Anda gunakan?" #: network/netconnect.pm:475 standalone/drakconnect:116 #: standalone/drakconnect:309 standalone/drakconnect:540 #: standalone/drakvpn:1142 #, c-format msgid "Protocol" msgstr "Protokol" #: network/netconnect.pm:487 #, c-format msgid "" "Select your provider.\n" "If it is not listed, choose Unlisted." msgstr "" "Pilih provider Anda.\n" "Bila tidak ada dalam daftar, pilih Tak Terdaftar" #: network/netconnect.pm:489 network/netconnect.pm:601 #: network/netconnect.pm:757 #, c-format msgid "Provider:" msgstr "Provider:" #: network/netconnect.pm:504 #, c-format msgid "" "Your modem is not supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Modem Anda tidak didukung oleh sistem.\n" "Silahkan lihat pada http://www.linmodems.org" #: network/netconnect.pm:516 #, c-format msgid "Select the modem to configure:" msgstr "Pilih modem yang akan dikonfigurasi:" #: network/netconnect.pm:568 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Pilih serial mort yang digunakan oleh mouse Anda." #: network/netconnect.pm:599 #, c-format msgid "Select your provider:" msgstr "Pilih provider Anda:" #: network/netconnect.pm:627 #, c-format msgid "Dialup: account options" msgstr "Dialup: opsi account" #: network/netconnect.pm:630 #, c-format msgid "Connection name" msgstr "Nama koneksi" #: network/netconnect.pm:631 #, c-format msgid "Phone number" msgstr "Nomor telepon" #: network/netconnect.pm:632 #, c-format msgid "Login ID" msgstr "Login ID" #: network/netconnect.pm:647 network/netconnect.pm:680 #, c-format msgid "Dialup: IP parameters" msgstr "Dialup: Parameter IP" #: network/netconnect.pm:650 #, c-format msgid "IP parameters" msgstr "Parameter IP" #: network/netconnect.pm:651 network/netconnect.pm:1018 #: printer/printerdrake.pm:454 standalone/drakconnect:116 #: standalone/drakconnect:325 standalone/drakconnect:879 #: standalone/drakups:282 #, c-format msgid "IP address" msgstr "Alamat IP" #: network/netconnect.pm:652 #, c-format msgid "Subnet mask" msgstr "Subnet mask" #: network/netconnect.pm:664 #, c-format msgid "Dialup: DNS parameters" msgstr "Dialup: Parameter DNS" #: network/netconnect.pm:667 #, c-format msgid "DNS" msgstr "DNS" #: network/netconnect.pm:668 #, c-format msgid "Domain name" msgstr "Nama domain" #: network/netconnect.pm:669 network/netconnect.pm:884 #: standalone/drakconnect:997 #, c-format msgid "First DNS Server (optional)" msgstr "Server DNS pertama (opsional)" #: network/netconnect.pm:670 network/netconnect.pm:885 #: standalone/drakconnect:998 #, c-format msgid "Second DNS Server (optional)" msgstr "Server DNS kedua (opsional)" #: network/netconnect.pm:671 #, c-format msgid "Set hostname from IP" msgstr "Tentukan hostname dari IP" #: network/netconnect.pm:683 standalone/drakconnect:336 #, c-format msgid "Gateway" msgstr "Gateway" #: network/netconnect.pm:684 #, c-format msgid "Gateway IP address" msgstr "Alamat IP Gateway" #: network/netconnect.pm:715 #, c-format msgid "ADSL configuration" msgstr "Konfigurasi ADSL" #: network/netconnect.pm:755 #, c-format msgid "Please choose your ADSL provider" msgstr "Pilih provider ADSL Anda" #: network/netconnect.pm:773 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" "Anda memerlukan kode mikro Alcatel.\n" "Anda bisa menyediakannya melalui disket atau partisi Windows,\n" "atau melewati dan melakukannya nanti." #: network/netconnect.pm:777 network/netconnect.pm:782 #, c-format msgid "Use a floppy" msgstr "Gunakan disket" #: network/netconnect.pm:777 network/netconnect.pm:786 #, c-format msgid "Use my Windows partition" msgstr "Gunakan partisi Windows" #: network/netconnect.pm:777 network/netconnect.pm:789 #, c-format msgid "Do it later" msgstr "Lakukan nanti" #: network/netconnect.pm:796 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "Penyalinan firmware gagal, file %s tidak ditemukan" #: network/netconnect.pm:803 #, c-format msgid "Firmware copy succeeded" msgstr "Penyalinan firmware sukses" #: network/netconnect.pm:818 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" "Anda perlu kode mikro Alcatel.\n" "Download di:\n" "%s\n" "dan salin mgmt.o pada /usr/share/speedtouch" #: network/netconnect.pm:889 #, c-format msgid "Virtual Path ID (VPI):" msgstr "Virtual Path ID (VPI):" #: network/netconnect.pm:890 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "Virtual Circuit ID (VCI):" #: network/netconnect.pm:893 #, c-format msgid "Encapsulation:" msgstr "Enkapsulasi:" #: network/netconnect.pm:910 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" "Modem Hi-Focus ECI tidak didukung karena masalah distribusi driver biner.\n" "\n" "Anda bisa menemukan driver pada http://eciadsl.flashtux.org/" #: network/netconnect.pm:922 #, c-format msgid "Manually load a driver" msgstr "Muat driver secara manual" #: network/netconnect.pm:922 #, c-format msgid "Use a Windows driver (with ndiswrapper)" msgstr "Gunakan driver Windows (dengan ndiswrapper)" #: network/netconnect.pm:940 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Modifying the fields below will override this configuration.\n" "Do you really want to reconfigure this device?" msgstr "" "PERINGATAN: divais ini telah dikonfigurasikan untuk terhubung ke " "Internet.\n" "Memodifikasi kolom dibawah akan menimpa konfigurasinya.\n" "Apakah Anda hendak mengkonfigurasi ulang divais ini?" #: network/netconnect.pm:954 network/netconnect.pm:1436 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Selamat, konfigurasi jaringan dan Internet selesai.\n" "\n" #: network/netconnect.pm:971 #, c-format msgid "Zeroconf hostname resolution" msgstr "Resolusi Nama Host Zeroconf" #: network/netconnect.pm:972 network/netconnect.pm:1005 #, c-format msgid "Configuring network device %s (driver %s)" msgstr "Mengkonfigurasi divais jaringan %s (driver %s)" #: network/netconnect.pm:973 #, c-format msgid "" "The following protocols can be used to configure an ethernet connection. " "Please choose the one you want to use" msgstr "" "Protokol berikut dapat digunakan untuk mengkonfigurasi koneksi ethernet. " "Silahkan pilih yang hendak Anda gunakan" #: network/netconnect.pm:1006 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Masukkan konfigurasi IP untuk komputer ini.\n" "Tiap item harus diberikan sebagai alamat IP dalam notasi decimal\n" "bertitik (misalnya 1.2.3.4)." #: network/netconnect.pm:1013 #, c-format msgid "Assign host name from DHCP address" msgstr "Tentukan nama host dari alamat DHCP" #: network/netconnect.pm:1014 #, c-format msgid "DHCP host name" msgstr "Nama Host DHCP" #: network/netconnect.pm:1019 standalone/drakconnect:330 #: standalone/drakconnect:880 standalone/drakgw:320 #, c-format msgid "Netmask" msgstr "Netmask" #: network/netconnect.pm:1021 standalone/drakconnect:415 #, c-format msgid "Track network card id (useful for laptops)" msgstr "Lacak ID kartu network (berguna untuk laptop)" #: network/netconnect.pm:1022 standalone/drakconnect:416 #, c-format msgid "Network Hotplugging" msgstr "Hotplugging Jaringan" #: network/netconnect.pm:1024 standalone/drakconnect:410 #, c-format msgid "Start at boot" msgstr "Start saat boot" #: network/netconnect.pm:1027 standalone/drakconnect:883 #, c-format msgid "DHCP client" msgstr "Klien DHCP" #: network/netconnect.pm:1041 standalone/drakconnect:389 #, c-format msgid "DHCP timeout (in seconds)" msgstr "Timeout DHCP (dalam detik)" #: network/netconnect.pm:1042 standalone/drakconnect:392 #, c-format msgid "Get DNS servers from DHCP" msgstr "Dapatkan server DNS dari DHCP" #: network/netconnect.pm:1043 #, c-format msgid "Get YP servers from DHCP" msgstr "Dapatkan server YP dari DHCP" #: network/netconnect.pm:1044 #, c-format msgid "Get NTPD servers from DHCP" msgstr "Dapatkan server NTPD dari DHCP" #: network/netconnect.pm:1037 printer/printerdrake.pm:1605 #: standalone/drakconnect:649 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "Alamat IP harus dalam format 1.2.3.4" #: network/netconnect.pm:1057 standalone/drakconnect:686 #, c-format msgid "Netmask should be in format 255.255.224.0" msgstr "Netmask harus dalam format 255.255.224.0" #: network/netconnect.pm:1041 #, c-format msgid "Warning: IP address %s is usually reserved!" msgstr "Peringatan: alamat IP %s biasanya sudah dipesan!" #: network/netconnect.pm:1046 standalone/drakTermServ:1742 #: standalone/drakTermServ:1743 standalone/drakTermServ:1744 #, c-format msgid "%s already in use\n" msgstr "%s sudah dipakai\n" #: network/netconnect.pm:1067 #, c-format msgid "Choose an ndiswrapper driver" msgstr "Pilih driver ndiswrapper" #: network/netconnect.pm:1068 network/netconnect.pm:1075 #, c-format msgid "Install a new driver" msgstr "Install driver baru" #: network/netconnect.pm:1068 #, c-format msgid "Use already installed driver (%s)" msgstr "Gunakan driver yang sudah terinstall (%s)" #: network/netconnect.pm:1072 printer/printerdrake.pm:3644 #, c-format msgid "Could not install the %s package!" msgstr "Tidak bisa menginstall paket %s" #: network/netconnect.pm:1076 #, c-format msgid "Please select the Windows driver (.inf file)" msgstr "Silahkan pilih driver Windows (file .inf)" #: network/netconnect.pm:1126 network/netconnect.pm:1155 #, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Masukkan parameter wireless untuk kartu ini:" #: network/netconnect.pm:1129 standalone/drakconnect:382 #, c-format msgid "Operating Mode" msgstr "Mode Operasi" #: network/netconnect.pm:1131 standalone/drakconnect:383 #, c-format msgid "Network name (ESSID)" msgstr "Nama Jaringan (ESSID)" #: network/netconnect.pm:1132 standalone/drakconnect:384 #, c-format msgid "Network ID" msgstr "ID Jaringan" #: network/netconnect.pm:1133 standalone/drakconnect:385 #, c-format msgid "Operating frequency" msgstr "Frekuensi operasi" #: network/netconnect.pm:1134 standalone/drakconnect:386 #, c-format msgid "Sensitivity threshold" msgstr "Batas sensitivitas" #: network/netconnect.pm:1135 standalone/drakconnect:387 #, c-format msgid "Bitrate (in b/s)" msgstr "Kecepatan (dalam b/s)" #: network/netconnect.pm:1141 #, c-format msgid "Use Wi-Fi Protected Access (WPA)" msgstr "Gunakan Wi-Fi Protected Access (WPA)" #: network/netconnect.pm:1168 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" "Freq harus berakhiran k, M atau G (mis. \"2.46G\" untuk frekuensi 2.46 GHz), " "atau tambahkan '0' (nol) secukupnya." #: network/netconnect.pm:1145 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" "Kecepatan harus berakhiran k, M atau G (mis. \"11M\" untuk 11M), atau tambahkan " "'0' (nol) secukupnya." #: network/netconnect.pm:1158 standalone/drakconnect:398 #, c-format msgid "RTS/CTS" msgstr "RTS/CTS" #: network/netconnect.pm:1159 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" "RTS/CTS menambahkan handshake sebelum transmisi setiap paket untuk \n" "memastikan kanal kosong. Hal ini menambahkan overhead, tetapi \n" "meningkatkan performa pada saat terdapat node tersembunyi atau node \n" "aktif dalam jumlah besar. Parameter ini menentukan ukuran dari paket \n" "terkecil node yang mengirimkan RTS, sebuah nilai yang sama dengan \n" "nilai maksimal paket yang menonaktifkan skema. Anda juga bisa \n" "menentukan parameter ini menjadi auto, fixed, atau off." #: network/netconnect.pm:1166 standalone/drakconnect:399 #, c-format msgid "Fragmentation" msgstr "Fragmentasi" #: network/netconnect.pm:1167 standalone/drakconnect:400 #, c-format msgid "Iwconfig command extra arguments" msgstr "Argumen tambahan perintah Iwconfig" #: network/netconnect.pm:1168 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwconfig(8) man page for further information." msgstr "" "Disini, Anda dapat mengkonfigurasi parameter nirkabel tambahan\n" "seperti ap, channel, commit, enc, power, retry, sens, txpower \n" "(nick sudah diset sebagai nama host).\n" "\n" "Lihat halaman manual iwconfig(8) untuk informasi lebih lanjut." #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:1175 standalone/drakconnect:401 #, c-format msgid "Iwspy command extra arguments" msgstr "Argumen tambahan perintah Iwspy" #: network/netconnect.pm:1176 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" "Iwspy digunakan untuk menentukan daftar alamat pada antarmuka\n" "jaringan nirkabel dan membaca kualitas informasi link dari \n" "setiap alamat.\n" "\n" "Informasi ini sama dengan yang ada pada /proc/net/wireless :\n" "kualitas link, kekuatan sinyal dan level noise.\n" "\n" "Lihat halaman manual iwpspy(8) untuk informasi lebih lanjut." #: network/netconnect.pm:1184 standalone/drakconnect:402 #, c-format msgid "Iwpriv command extra arguments" msgstr "Argumen tambahan perintah Iwpriv" #: network/netconnect.pm:1185 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" "Iwpriv aktif untuk menentukan paramater opsional (privat) dari antarmuka\n" "jaringan nirkabel.\n" "\n" "Iwpriv berhubungan dengan parameter dan setting khusus untuk setiap driver\n" "(kebalikan dengan iwconfig yang berhubungan dengan setting umum).\n" "\n" "Secara teori, dokumentasi untuk setiap driver divais harus mengindikasikan\n" "bagaimana menggunakan perintah antarmuka khusus dan efeknya.\n" "\n" "Lihat halaman manual iwpriv(8) untuk informasi lebih lanjut." #: network/netconnect.pm:1259 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Masukkan nama host Anda.\n" "Nama host Anda sebaiknya merupakan nama host yang fully-qualified\n" "misalnya ``komputer.lab.grup.com''.\n" "Anda juga bisa masukkan alamat IP gateway jika ada" #: network/netconnect.pm:1263 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "Terakhir, Anda juga bisa memasukkan alamat IP server DNS Anda." #: network/netconnect.pm:1265 standalone/drakconnect:996 #, c-format msgid "Host name (optional)" msgstr "Nama host (opsional)" #: network/netconnect.pm:1265 #, c-format msgid "Host name" msgstr "Nama Host" #: network/netconnect.pm:1267 #, c-format msgid "DNS server 1" msgstr "Server DNS 1" #: network/netconnect.pm:1268 #, c-format msgid "DNS server 2" msgstr "Server DNS 2" #: network/netconnect.pm:1269 #, c-format msgid "DNS server 3" msgstr "Server DNS 3" #: network/netconnect.pm:1270 #, c-format msgid "Search domain" msgstr "Pencarian Domain" #: network/netconnect.pm:1271 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "Secara default pencarian domain akan ditentukan dari nama host" #: network/netconnect.pm:1272 #, c-format msgid "Gateway (e.g. %s)" msgstr "Gateway (mis. %s)" #: network/netconnect.pm:1274 #, c-format msgid "Gateway device" msgstr "Divais gateway" #: network/netconnect.pm:1283 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Alamat server DNS harus dalam format 1.2.3.4" #: network/netconnect.pm:1288 standalone/drakconnect:652 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Alamat gateway harus dalam format 1.2.3.4" #: network/netconnect.pm:1299 #, c-format msgid "" "If desired, enter a Zeroconf hostname.\n" "This is the name your machine will use to advertise any of\n" "its shared resources that are not managed by the network.\n" "It is not necessary on most networks." msgstr "" "Jika diinginkan, masukkan nama host Zeroconf.\n" "Ini adalah nama yang akan digunakan komputer Anda untuk\n" "menyebarkan sumber daya yang tidak dikelola oleh jaringan.\n" "Ini tidak diperlukan pada sebagian besar jaringan." #: network/netconnect.pm:1303 #, c-format msgid "Zeroconf Host name" msgstr "Nama Host Zeroconf" #: network/netconnect.pm:1306 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "Nama host Zeroconf tidak boleh berisi ." #: network/netconnect.pm:1316 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Anda telah mengkonfigurasi beberapa cara untuk koneksi Internet.\n" "Pilih yang hendak Anda pakai.\n" "\n" #: network/netconnect.pm:1318 #, c-format msgid "Internet connection" msgstr "Koneksi Internet" #: network/netconnect.pm:1326 #, c-format msgid "Configuration is complete, do you want to apply settings?" msgstr "Konfigurasi selesai, apakah Anda ingin menerapkan setting?" #: network/netconnect.pm:1336 #, c-format msgid "Do you want to allow users to start the connection?" msgstr "Apakah Anda ingin mengijinkan pengguna menjalankan koneksi" #: network/netconnect.pm:1345 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Apakah Anda ingin menjalankan koneksi saat boot?" #: network/netconnect.pm:1354 #, c-format msgid "Automatically at boot" msgstr "Otomatis saat boot" #: network/netconnect.pm:1356 #, c-format msgid "By using Net Applet in the system tray" msgstr "Dengan menggunakan Applet Net pada system tray" #: network/netconnect.pm:1358 #, c-format msgid "Manually (the interface would still be activated at boot)" msgstr "Manual (antarmuka akan tetap diaktifkan saat boot)" #: network/netconnect.pm:1367 #, c-format msgid "How do you want to dial this connection?" msgstr "Bagaimana Anda ingin menghubungi koneksi ini?" #: network/netconnect.pm:1380 #, c-format msgid "The network needs to be restarted. Do you want to restart it?" msgstr "Jaringan perlu dijalankan ulang. Apakah Anda ingin me-restart?" #: network/netconnect.pm:1387 network/netconnect.pm:1452 #, c-format msgid "Network Configuration" msgstr "Konfigurasi Jaringan" #: network/netconnect.pm:1388 #, c-format msgid "" "A problem occurred while restarting the network: \n" "\n" "%s" msgstr "" "Masalah terjadi saat restart jaringan:\n" "\n" "%s" #: network/netconnect.pm:1396 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Apakah Anda ingin mencoba terkoneksi ke Internet sekarang?" #: network/netconnect.pm:1404 standalone/drakconnect:1028 #, c-format msgid "Testing your connection..." msgstr "Menguji koneksi Anda..." #: network/netconnect.pm:1420 #, c-format msgid "The system is now connected to the Internet." msgstr "Sistem ini kini terhubung ke Internet." #: network/netconnect.pm:1421 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Untuk alasan keamanan, koneksi akan diputus sekarang." #: network/netconnect.pm:1422 #, c-format msgid "" "The system does not seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Sistem ini tampaknya tidak terhubung ke Internet.\n" "Cobalah konfigurasikan ulang koneksi Anda." #: network/netconnect.pm:1439 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Setelah selesai, disarankan Anda me-restart lingkungan X untuk " "menghindari masalah nama host." #: network/netconnect.pm:1440 #, c-format msgid "" "Problems occurred during configuration.\n" "Test your connection via net_monitor or mcc. If your connection does not " "work, you might want to relaunch the configuration." msgstr "" "Masalah terjadi saat konfigurasi.\n" "Uji koneksi Anda via net_monitor atau mcc. Jika koneksi tidak bekerja " "Anda mungkin perlu menjalankan ulang konfigurasi" #: network/netconnect.pm:1453 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Karena Anda melakukan installasi jaringan, jaringan Anda sudah " "terkonfigurasi.\n" "Klik pada Ok untuk mempertahankan konfigurasi, atau batal untuk " "mengkonfigurasi ulang koneksi Internet & Jaringan Anda.\n" #: network/netconnect.pm:1491 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" "Kesalahan tidak diduga telah terjadi:\n" "%s" #: network/network.pm:319 #, c-format msgid "Proxies configuration" msgstr "Konfigurasi proxy" #: network/network.pm:320 #, c-format msgid "HTTP proxy" msgstr "Proxy HTTP" #: network/network.pm:321 #, c-format msgid "FTP proxy" msgstr "Proxy FTP" #: network/network.pm:324 #, c-format msgid "Proxy should be http://..." msgstr "Proxy biasanya http://..." #: network/network.pm:325 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "URL harus berawalan 'ftp:' atau 'http:'" #: network/shorewall.pm:25 #, c-format msgid "Firewalling configuration detected!" msgstr "Konfigurasi firewall terdeteksi!" #: network/shorewall.pm:26 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Perintatan! Konfigurasi firewall yang sudah ada terdeteksi. Anda perlu " "beberapa perbaikan manual setelah instalasi." #: network/shorewall.pm:91 standalone/drakgw:217 standalone/drakvpn:214 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" "Masukkan nama antarmuka yang terhubung ke Internet.\n" "\n" "Misal:\n" "\t\tppp+ untuk modem atau koneksi DSL, \n" "\t\teth0, atau eth1 untuk koneksi kabel, \n" "\t\tippp+ untuk koneksi isdn.\n" #: network/tools.pm:181 #, c-format msgid "Insert floppy" msgstr "Masukkan disket" #: network/tools.pm:182 #, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "" "Masukkan disket yang sudah diformat dengan tipe FAT pada drive %s dengan " "%s pada direktori root dan tekan %s" #: network/tools.pm:187 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Kesalahan mengakses disket, tidak bisa me-mount divais %s" #: partition_table.pm:397 #, c-format msgid "mount failed: " msgstr "proses mount gagal: " #: partition_table.pm:502 #, c-format msgid "Extended partition not supported on this platform" msgstr "Partisi extended tidak didukung pada platform ini" #: partition_table.pm:520 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Anda memiliki celah pada tabel partisi tetapi tidak bisa digunakan.\n" "Solusi satu-satunya adalah memindahkan partisi primary Anda ke partisi\n" "extended selanjutnya" #: partition_table.pm:611 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Proses pengembalian dari file %s gagal: %s" #: partition_table.pm:613 #, c-format msgid "Bad backup file" msgstr "File backup rusak" #: partition_table.pm:633 #, c-format msgid "Error writing to file %s" msgstr "Kesalahan penulisan ke file %s" #: partition_table/raw.pm:240 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Sesuatu yang rusak terjadi pada hard disk Anda.\n" "Pengujian integritas data gagal.\n" "Artinya penulisan data apapun pada disk akan berakhir dengan " "data acak yang rusak." #: pkgs.pm:23 #, c-format msgid "must have" msgstr "harus ada" #: pkgs.pm:24 #, c-format msgid "important" msgstr "penting" #: pkgs.pm:25 #, c-format msgid "very nice" msgstr "amat bagus" #: pkgs.pm:26 #, c-format msgid "nice" msgstr "bagus" #: pkgs.pm:27 #, c-format msgid "maybe" msgstr "mungkin" #: pkgs.pm:474 #, c-format msgid "Downloading file %s..." msgstr "Mendownload file %s..." #: printer/cups.pm:103 #, c-format msgid "(on %s)" msgstr "(pada %s)" #: printer/cups.pm:103 #, c-format msgid "(on this machine)" msgstr "(pada komputer ini)" #: printer/cups.pm:115 standalone/printerdrake:187 #, c-format msgid "Configured on other machines" msgstr "Terkonfigurasi pada komputer lain" #: printer/cups.pm:117 #, c-format msgid "On CUPS server \"%s\"" msgstr "Pada server CUPS \"%s\"" #: printer/cups.pm:117 printer/printerdrake.pm:4650 #: printer/printerdrake.pm:4660 printer/printerdrake.pm:4805 #: printer/printerdrake.pm:4816 printer/printerdrake.pm:5011 #, c-format msgid " (Default)" msgstr " (Default)" #: printer/data.pm:56 #, c-format msgid "PDQ - Print, Do not Queue" msgstr "PDQ - Print, Do not Queue" #: printer/data.pm:57 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:69 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:70 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:91 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:92 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:117 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: printer/data.pm:147 #, c-format msgid "CUPS - Common Unix Printing System (remote server)" msgstr "CUPS - Common Unix Printing System (server remote)" #: printer/data.pm:148 #, c-format msgid "Remote CUPS" msgstr "CUPS remote" #: printer/detect.pm:153 printer/detect.pm:236 printer/detect.pm:438 #: printer/detect.pm:475 #, c-format msgid "Unknown Model" msgstr "Model Tak Dikenal" #: printer/main.pm:27 #, c-format msgid "Local printer" msgstr "Printer lokal" #: printer/main.pm:28 #, c-format msgid "Remote printer" msgstr "printer remote" #: printer/main.pm:29 #, c-format msgid "Printer on remote CUPS server" msgstr "Printer pada server CUPS remote" #: printer/main.pm:30 printer/printerdrake.pm:1628 #, c-format msgid "Printer on remote lpd server" msgstr "Printer pada server lpd remote" #: printer/main.pm:31 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Printer jaringan (TCP/Socket)" #: printer/main.pm:32 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Printer pada server SMB/windows 95/98/NT" #: printer/main.pm:33 #, c-format msgid "Printer on NetWare server" msgstr "Printer pada server NetWare" #: printer/main.pm:34 printer/printerdrake.pm:1632 #, c-format msgid "Enter a printer device URI" msgstr "Masukkan URI device printer" #: printer/main.pm:35 #, c-format msgid "Pipe job into a command" msgstr "Pipe job ke perintah" #. Translation of the "(recommended)" in printer driver entries #: printer/main.pm:45 #, c-format msgid "recommended" msgstr "disarankan" #: printer/main.pm:324 printer/main.pm:629 printer/main.pm:1664 #: printer/main.pm:2699 printer/main.pm:2708 printer/printerdrake.pm:903 #: printer/printerdrake.pm:2094 printer/printerdrake.pm:5048 #, c-format msgid "Unknown model" msgstr "Model tak dikenal" #: printer/main.pm:349 standalone/printerdrake:186 #, c-format msgid "Configured on this machine" msgstr "Terkonfigurasi pada komputer ini" #: printer/main.pm:355 printer/printerdrake.pm:1175 #, c-format msgid " on parallel port #%s" msgstr " pada port paralel #%s" #: printer/main.pm:358 printer/printerdrake.pm:1178 #, c-format msgid ", USB printer #%s" msgstr ", printer USB #%s" #: printer/main.pm:360 #, c-format msgid ", USB printer" msgstr ", printer USB" #: printer/main.pm:364 #, c-format msgid ", HP printer on a parallel port" msgstr ", Printer HP pada port paralel" #: printer/main.pm:366 #, c-format msgid ", HP printer on USB" msgstr ", printer HP pada USB" #: printer/main.pm:368 #, c-format msgid ", HP printer on HP JetDirect" msgstr ", printer HP pada HP JetDirect" #: printer/main.pm:370 #, c-format msgid ", HP printer" msgstr ", printer HP" #: printer/main.pm:376 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", divais multi fungsi pada port paralel #%s" #: printer/main.pm:379 #, c-format msgid ", multi-function device on a parallel port" msgstr ", divais multi fungsi pada port paralel" #: printer/main.pm:381 #, c-format msgid ", multi-function device on USB" msgstr ", divais multi fungsi pada USB" #: printer/main.pm:383 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", divais multi fungsi pada HP JetDirect" #: printer/main.pm:385 #, c-format msgid ", multi-function device" msgstr ", divais multi fungsi" #: printer/main.pm:389 #, c-format msgid ", printing to %s" msgstr ", mencetak ke %s" #: printer/main.pm:392 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " pada server LPD \"%s\", printer \"%s\"" #: printer/main.pm:395 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", host TCP/IP \"%s\", port %s" #: printer/main.pm:400 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " pada server SMB/Windows \"%s\", share \"%s\"" #: printer/main.pm:405 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " pada server Novell \"%s\", printer \"%s\"" #: printer/main.pm:408 #, c-format msgid ", using command %s" msgstr ", menggunakan perintah %s" #: printer/main.pm:423 #, c-format msgid "Parallel port #%s" msgstr " Port paralel #%s" #: printer/main.pm:426 printer/printerdrake.pm:1196 #: printer/printerdrake.pm:1223 printer/printerdrake.pm:1241 #, c-format msgid "USB printer #%s" msgstr "printer USB #%s" #: printer/main.pm:428 #, c-format msgid "USB printer" msgstr "Printer USB" #: printer/main.pm:432 #, c-format msgid "HP printer on a parallel port" msgstr "Printer HP pada port paralel" #: printer/main.pm:434 #, c-format msgid "HP printer on USB" msgstr "Printer HP pada USB" #: printer/main.pm:436 #, c-format msgid "HP printer on HP JetDirect" msgstr "Printer HP pada HP JetDirect" #: printer/main.pm:438 #, c-format msgid "HP printer" msgstr "Printer HP" #: printer/main.pm:444 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "Divais multi fungsi pada port paralel #%s" #: printer/main.pm:447 #, c-format msgid "Multi-function device on a parallel port" msgstr "Divais multi fungsi pada port paralel" #: printer/main.pm:449 #, c-format msgid "Multi-function device on USB" msgstr "Divais multi fungsi pada USB" #: printer/main.pm:451 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "Divais multi fungsi pada HP JetDirect" #: printer/main.pm:453 #, c-format msgid "Multi-function device" msgstr "Divais multi fungsi" #: printer/main.pm:457 #, c-format msgid "Prints into %s" msgstr "Mencetak pada %s" #: printer/main.pm:460 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "Server LPD \"%s\", printer \"%s\"" #: printer/main.pm:463 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "Host TCP/IP \"%s\", port %s" #: printer/main.pm:468 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "Server SMB/Windows \"%s\", share \"%s\"" #: printer/main.pm:473 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Server Novell \"%s\", printer \"%s\"" #: printer/main.pm:476 #, c-format msgid "Uses command %s" msgstr "Menggunakan perintah %s" #: printer/main.pm:478 #, c-format msgid "URI: %s" msgstr "URI: %s" #: printer/main.pm:626 printer/printerdrake.pm:849 #: printer/printerdrake.pm:2861 #, c-format msgid "Raw printer (No driver)" msgstr "Printer raw (Tanpa driver)" #: printer/main.pm:1176 printer/printerdrake.pm:205 #: printer/printerdrake.pm:217 #, c-format msgid "Local network(s)" msgstr "Jaringan lokal" #: printer/main.pm:1178 printer/printerdrake.pm:221 #, c-format msgid "Interface \"%s\"" msgstr "Antarmuka \"%s\"" #: printer/main.pm:1180 #, c-format msgid "Network %s" msgstr "Jaringan %s" #: printer/main.pm:1182 #, c-format msgid "Host %s" msgstr "Host %s" #: printer/main.pm:1211 #, c-format msgid "%s (Port %s)" msgstr "%s (Port %s)" #: printer/printerdrake.pm:19 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "decompressing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" "HP LaserJet 1000 perlu firmware di-upload setelah dinyalakan. Downloadlah " "paket driver Windows dari situs web HP (firmware di CD printer tak bekerja) " "dan urailah file firmware (self-extracting '.exe' file) dg utilitas 'unzip' " "dan carilah file 'sihp1000.img'. Copy file ini ke direktori '/etc/printer'. " "Di sana ia akan ditemukan oleh skrip uploader otomatis dan di-upload ketika " "printer dihubungkan dan dinyalakan.\n" #: printer/printerdrake.pm:61 #, c-format msgid "CUPS printer configuration" msgstr "Konfigurasi printer CUPS" #: printer/printerdrake.pm:62 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Di sini Anda dapat memilih apakah printer yg terhubung dg komputer ini bisa " "diakses oleh komputer remote dan oleh komputer remote mana." #: printer/printerdrake.pm:63 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Anda dapat memutuskan apakah printer di komputer remote harus dibuat secara " "otomatis agar dapat dipakai di komputer ini." #: printer/printerdrake.pm:66 #, c-format msgid "The printers on this machine are available to other computers" msgstr "Printer di komputer ini dapat dipakai oleh komputer lain" #: printer/printerdrake.pm:71 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Cari printer di komputer lain secara otomatis" #: printer/printerdrake.pm:76 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Sharing printer di host/jaringan: " #: printer/printerdrake.pm:78 #, c-format msgid "Custom configuration" msgstr "Konfigurasi pribadi" #: printer/printerdrake.pm:83 standalone/scannerdrake:593 #: standalone/scannerdrake:610 #, c-format msgid "No remote machines" msgstr "Tiada komputer remote" #: printer/printerdrake.pm:94 #, c-format msgid "Additional CUPS servers: " msgstr "Server CUPS tambahan: " #: printer/printerdrake.pm:101 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" "Utk mengakses printer di server CUPS dalam jaringan lokal Anda hanya perlu\n" "menyalakan opsi \"Cari printer di komputer lain secara otomatis\"; server " "CUPS\n" "secara otomatis memberitahu komputer Anda ttg printer mereka. Semua printer " "yg\n" "kini dikenal oleh komputer Anda terdaftar di bagian \"Printer remote\" " "window\n" "utama Printerdrake. Jika server CUPS Anda tak berada di jaringan lokal,\n" "masukkan alamat IP (dan nomor port bila perlu) untuk mendapat info printer\n" "dari server." #: printer/printerdrake.pm:109 #, c-format msgid "Japanese text printing mode" msgstr "Mode cetak teks Jepang" #: printer/printerdrake.pm:110 #, c-format msgid "" "Turning on this allows to print plain text files in Japanese language. Only " "use this function if you really want to print text in Japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print Japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" "Nyalakan ini HANYA BILA Anda benar-benar perlu mencetak teks bahasa Jepang, " "jika ini aktif Anda tak dapat mencetak huruf aksen font latin dan takkan " "dapat menyetel margin, ukuran huruf, dsb. Setting ini hanya berlaku bagi " "printer yg didefinisikan di komputer ini. Jika ingin mencetak teks Jepang di " "printer komputer lain, aktifkan fungsi ini di komputer remote tsb." #: printer/printerdrake.pm:117 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Koreksi otomatis konfigurasi CUPS" #: printer/printerdrake.pm:119 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Jika opsi ini dipilih, pada tiap penyalaan CUPS akan dipastikan bahwa\n" "\n" "- jika LPD/LPRng terinstal, /etc/printcap takkan ditindih oleh CUPS\n" "\n" "- jika /etc/cups/cupsd.conf hilang, akan dibuatkan\n" "\n" "- saat info printer disiarkan, tidak ada nama server \"localhost\"<.\n" "\n" "Jika tindakan ini menimbulkan masalah, matikan opsi ini, tapi Anda harus\n" "memperhatikan poin-poin ini." #: printer/printerdrake.pm:132 printer/printerdrake.pm:500 #: printer/printerdrake.pm:4292 #, c-format msgid "Remote CUPS server and no local CUPS daemon" msgstr "" #: printer/printerdrake.pm:135 #, c-format msgid "On" msgstr "Aktif" #: printer/printerdrake.pm:137 printer/printerdrake.pm:492 #: printer/printerdrake.pm:519 #, c-format msgid "Off" msgstr "Tak aktif" #: printer/printerdrake.pm:138 printer/printerdrake.pm:501 #, c-format msgid "" "In this mode the local CUPS daemon will be stopped and all printing requests " "go directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:155 printer/printerdrake.pm:230 #, c-format msgid "Sharing of local printers" msgstr "Berbagi printer lokal" #: printer/printerdrake.pm:156 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "Mesin dan jaringan yg printer lokalnya dapat dipakai:" #: printer/printerdrake.pm:167 #, c-format msgid "Add host/network" msgstr "Tambahkan host/jaringan" #: printer/printerdrake.pm:173 #, c-format msgid "Edit selected host/network" msgstr "Edit host/jaringan terpilih" #: printer/printerdrake.pm:182 #, c-format msgid "Remove selected host/network" msgstr "Hapus host/jaringan terpilih" #: printer/printerdrake.pm:213 printer/printerdrake.pm:223 #: printer/printerdrake.pm:235 printer/printerdrake.pm:242 #: printer/printerdrake.pm:273 printer/printerdrake.pm:291 #, c-format msgid "IP address of host/network:" msgstr "Alamat IP host/jaringan:" #: printer/printerdrake.pm:231 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "Pilihlah jaringan/host yg ingin dipakai printer lokalnya:" #: printer/printerdrake.pm:238 #, c-format msgid "Host/network IP address missing." msgstr "Alamat IP host/jaringan hilang." #: printer/printerdrake.pm:246 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "IP host/jaringan tak benar.\n" #: printer/printerdrake.pm:247 printer/printerdrake.pm:423 #, c-format msgid "Examples for correct IPs:\n" msgstr "Contoh IP yg benar:\n" #: printer/printerdrake.pm:271 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "Host/jaringan ini sudah terdaftar, tak dapat ditambahkan lagi.\n" #: printer/printerdrake.pm:340 printer/printerdrake.pm:410 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Sedang mengakses printer di server CUPS remote" #: printer/printerdrake.pm:341 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" "Tambahkan di sini server CUPS yg printernya ingin Anda pakai. Anda hanya " "perlu melakukan ini jika server tak menyiarkan info printernya ke jaringan " "lokal." #: printer/printerdrake.pm:352 #, c-format msgid "Add server" msgstr "Tambah server" #: printer/printerdrake.pm:358 #, c-format msgid "Edit selected server" msgstr "Edit server yg dipilih" #: printer/printerdrake.pm:367 #, c-format msgid "Remove selected server" msgstr "Hapus server yg dipilih" #: printer/printerdrake.pm:411 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "Masukkan alamat IP dan port host yg ingin Anda pakai printernya." #: printer/printerdrake.pm:412 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "Jika port tak diberikan, sbg standar akan dipakai 631." #: printer/printerdrake.pm:416 #, c-format msgid "Server IP missing!" msgstr "Server IP hilang!" #: printer/printerdrake.pm:422 #, c-format msgid "The entered IP is not correct.\n" msgstr "IP tak benar.\n" #: printer/printerdrake.pm:434 printer/printerdrake.pm:1852 #, c-format msgid "The port number should be an integer!" msgstr "Nomor port harus berupa bilangan bulat" #: printer/printerdrake.pm:445 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "Server ini sudah terdaftar, tak dapat ditambahkan lagi.\n" #: printer/printerdrake.pm:456 printer/printerdrake.pm:1873 #: standalone/drakups:247 standalone/harddrake2:50 #, c-format msgid "Port" msgstr "Port" #: printer/printerdrake.pm:489 printer/printerdrake.pm:505 #: printer/printerdrake.pm:520 printer/printerdrake.pm:524 #: printer/printerdrake.pm:530 #, fuzzy, c-format msgid "On, Name or IP of remote server:" msgstr "Printer di server lpd remote" #: printer/printerdrake.pm:508 printer/printerdrake.pm:4301 #: printer/printerdrake.pm:4366 #, fuzzy, c-format msgid "CUPS server name or IP address missing." msgstr "Alamat IP host/jaringan hilang." #: printer/printerdrake.pm:560 printer/printerdrake.pm:580 #: printer/printerdrake.pm:673 printer/printerdrake.pm:739 #: printer/printerdrake.pm:766 printer/printerdrake.pm:825 #: printer/printerdrake.pm:867 printer/printerdrake.pm:877 #: printer/printerdrake.pm:1926 printer/printerdrake.pm:2137 #: printer/printerdrake.pm:2169 printer/printerdrake.pm:2217 #: printer/printerdrake.pm:2269 printer/printerdrake.pm:2286 #: printer/printerdrake.pm:2330 printer/printerdrake.pm:2370 #: printer/printerdrake.pm:2420 printer/printerdrake.pm:2454 #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2714 #: printer/printerdrake.pm:2719 printer/printerdrake.pm:2856 #: printer/printerdrake.pm:2966 printer/printerdrake.pm:3560 #: printer/printerdrake.pm:3625 printer/printerdrake.pm:3674 #: printer/printerdrake.pm:3677 printer/printerdrake.pm:3808 #: printer/printerdrake.pm:3908 printer/printerdrake.pm:3980 #: printer/printerdrake.pm:4001 printer/printerdrake.pm:4010 #: printer/printerdrake.pm:4104 printer/printerdrake.pm:4196 #: printer/printerdrake.pm:4202 printer/printerdrake.pm:4222 #: printer/printerdrake.pm:4328 printer/printerdrake.pm:4435 #: printer/printerdrake.pm:4454 printer/printerdrake.pm:4463 #: printer/printerdrake.pm:4477 printer/printerdrake.pm:4673 #: printer/printerdrake.pm:5109 printer/printerdrake.pm:5186 #: standalone/printerdrake:67 standalone/printerdrake:554 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:561 printer/printerdrake.pm:3909 #: printer/printerdrake.pm:4436 #, c-format msgid "Reading printer data..." msgstr "Pembacaan data printer..." #: printer/printerdrake.pm:581 #, c-format msgid "Restarting CUPS..." msgstr "Jalankan ulang CUPS..." #: printer/printerdrake.pm:608 printer/printerdrake.pm:628 #, c-format msgid "Select Printer Connection" msgstr "Pilih koneksi Printer" #: printer/printerdrake.pm:609 #, c-format msgid "How is the printer connected?" msgstr "Bagaimana printer ini disambung ke komputer?" #: printer/printerdrake.pm:611 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Printer pada server CUPS remote tak perlu dikonfigurasikan di sini; printer " "ini akan secara otomatis dideteksi." #: printer/printerdrake.pm:614 printer/printerdrake.pm:4675 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:621 #, fuzzy, c-format msgid "" "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)" msgstr "Printer deteksi otomatis (Lokal, TCP/Socket, dan SMB)" #: printer/printerdrake.pm:623 #, c-format msgid "Modify timeout for network printer auto-detection" msgstr "" #: printer/printerdrake.pm:629 #, c-format msgid "Enter the timeout for network printer auto-detection (in msec) here. " msgstr "" #: printer/printerdrake.pm:631 #, c-format msgid "" "The longer you choose the timeout, the more reliable the detections of " "network printers will be, but the scan can take longer then, especially if " "there are many machines with local firewalls in the network. " msgstr "" #: printer/printerdrake.pm:635 #, fuzzy, c-format msgid "The timeout must be a positive integer number!" msgstr "Opsi %s harus berupa integer!" #: printer/printerdrake.pm:673 #, c-format msgid "Checking your system..." msgstr "Pengecekan sistem..." #: printer/printerdrake.pm:690 #, c-format msgid "and one unknown printer" msgstr "dan satu printer tak dikenal" #: printer/printerdrake.pm:692 #, c-format msgid "and %d unknown printers" msgstr "dan %d printer tak dikenal" #: printer/printerdrake.pm:696 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Printer berikut\n" "\n" "%s%s\n" "terhubung langsung dg sistem Anda" #: printer/printerdrake.pm:698 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Printer berikut\n" "\n" "%s%s\n" "terhubung langsung dg sistem Anda" #: printer/printerdrake.pm:699 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Printer berikut\n" "\n" "%s%s\n" "terhubung langsung dg sistem Anda" #: printer/printerdrake.pm:703 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Sebuah printer tak dikenal terhubung langsung dengan sistem Anda" #: printer/printerdrake.pm:704 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "%d printer tak dikenal terhubung langsung dengan sistem Anda" #: printer/printerdrake.pm:707 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Tiada printer yg ditemukan terhubung langsung ke komputer Anda" #: printer/printerdrake.pm:710 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (Pastikan semua printer Anda terhubung dan hidup).\n" #: printer/printerdrake.pm:723 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Anda ingin mengaktifkan pencetakan di printer tersebut di atas atau printer " "di jaringan lokal?\n" #: printer/printerdrake.pm:724 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Anda ingin mengaktifkan pencetakan di printer jaringan lokal?\n" #: printer/printerdrake.pm:726 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Anda ingin mengaktifkan pencetakan di printer tersebut di atas?\n" #: printer/printerdrake.pm:727 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Anda yakin ingin men-setup pencetakan di komputer ini?\n" #: printer/printerdrake.pm:728 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "CATATAN: Akan diinstal divais lunak tambahan hingga %d MB tergantung model " "printer dan sistem cetak." #: printer/printerdrake.pm:767 #, c-format msgid "Searching for new printers..." msgstr "Cari printer baru..." #: printer/printerdrake.pm:826 #, fuzzy, c-format msgid "Found printer on %s..." msgstr "Menghapus printer \"%s\"..." #: printer/printerdrake.pm:851 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:852 #, c-format msgid " on " msgstr " di " #: printer/printerdrake.pm:853 standalone/scannerdrake:137 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:858 printer/printerdrake.pm:2868 #, c-format msgid "Printer model selection" msgstr "Seleksi model printer" #: printer/printerdrake.pm:859 printer/printerdrake.pm:2869 #, c-format msgid "Which printer model do you have?" msgstr "Anda punya model printer mana?" #: printer/printerdrake.pm:860 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Printerdrake tak dapat menentukan model printer %s Anda. Pilihlah model yg " "benar dari daftar." #: printer/printerdrake.pm:863 printer/printerdrake.pm:2874 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Jika printer Anda tak terdaftar, pilih yang kompatibel (lihat manual) atau " "yang mirip." #: printer/printerdrake.pm:868 #, fuzzy, c-format msgid "Configuring printer on %s..." msgstr "Konfigurasikan printer \"%s\"..." #: printer/printerdrake.pm:878 printer/printerdrake.pm:4455 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Konfigurasikan printer \"%s\"..." #: printer/printerdrake.pm:1036 printer/printerdrake.pm:1048 #: printer/printerdrake.pm:1107 printer/printerdrake.pm:2103 #: printer/printerdrake.pm:2118 printer/printerdrake.pm:2188 #: printer/printerdrake.pm:4692 printer/printerdrake.pm:4861 #, c-format msgid "Add a new printer" msgstr "Tambah printer baru" #: printer/printerdrake.pm:1037 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Selamat Datang di Dukun Setup Printer\n" "\n" "Dukun ini dapat menginstal printer lokal atau remote untuk digunakan dari " "komputer ini dan juga dari komputer lain di network.\n" "\n" "Dia akan menanyai semua info yg dibutuhkan untuk menset up printer dan " "memberi Anda akses ke semua driver printer tersedia, opsi driver, dan tipe " "koneksi printer." #: printer/printerdrake.pm:1050 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you do not " "need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Selamat Datang di Penolong Setup Printer\n" "\n" "Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini, dg " "jaringan atau dg komputer Windows remote.\n" "\n" "Hubungkan dan nyalakan semua printer yg terhubung dg komputer ini agar dapat " "dideteksi. Juga printer jaringan dan komputer Windows harus terhubung dan " "dinyalakan.\n" "\n" "Ingat, deteksi printer jaringan butuh waktu lebih lama daripada printer yg " "terhubung langsung dg komputer ini. Matikan deteksi printer jaringan dan/" "atau Windows jika tak perlu.\n" "\n" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." #: printer/printerdrake.pm:1059 #, fuzzy, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Selamat Datang di Penolong Setup Printer\n" "\n" "Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini.\n" "\n" "Jika Anda punya printer terhubung dg komputer ini, hubungkan dan nyalakan " "sehingga dapat dideteksi.\n" "\n" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." #: printer/printerdrake.pm:1067 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you do not need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Selamat Datang di Penolong Setup Printer\n" "\n" "Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini atau " "jaringan.\n" "\n" "Jika Anda punya printer terhubung dg komputer ini, hubungkan dan nyalakan " "sehingga ia/mereka dapat dideteksi. Juga printer jaringan harus terhubung " "dan dinyalakan.\n" "\n" "Ingat, deteksi printer jaringan membutuhkan waktu lebih lama daripada " "printer yg terhubung langsung dg komputer ini. Matikan deteksi printer " "jaringan jika tak perlu.\n" "\n" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." #: printer/printerdrake.pm:1076 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" "Selamat Datang di Penolong Setup Printer\n" "\n" "Alat ini menolong Anda menginstal printer yg terhubung dg komputer ini.\n" "\n" "Jika Anda punya printer terhubung dg komputer ini, hubungkan dan nyalakan " "sehingga dapat dideteksi.\n" "\n" " Klik \"Lanjut\" jika siap, dan \"Batal\" jika Anda tak ingin men-setup " "printer sekarang." #: printer/printerdrake.pm:1085 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Deteksi printer yg terhubung dg komputer ini" #: printer/printerdrake.pm:1088 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Deteksi printer yang terhubung dengan jaringan lokal" #: printer/printerdrake.pm:1091 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "Deteksi printer yg terhubung dg komputer Microsoft Windows" #: printer/printerdrake.pm:1108 #, fuzzy, c-format msgid "No auto-detection" msgstr "Deteksi otomatis" #: printer/printerdrake.pm:1173 #, fuzzy, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "Selamat, printer Anda kini terinstal dan terkonfigurasi!\n" "\n" "Anda dapat mencetak dg perintah \"Cetak\" di aplikasi Anda (biasanya di menu " "\"File\").\n" "\n" "Jika Anda ingin menambah, menghapus atau mengubah nama printer, atau jika " "ingin mengubah opsi standar setting (tray kertas, kualitas cetak, ...), " "pilih \"Printer\" di bagian \"Perangkat Keras\" Pusat Kontrol Mandrake." #: printer/printerdrake.pm:1143 printer/printerdrake.pm:1373 #: printer/printerdrake.pm:1435 printer/printerdrake.pm:1525 #: printer/printerdrake.pm:1663 printer/printerdrake.pm:1738 #: printer/printerdrake.pm:1890 printer/printerdrake.pm:1976 #: printer/printerdrake.pm:1985 printer/printerdrake.pm:1994 #: printer/printerdrake.pm:2005 printer/printerdrake.pm:2143 #: printer/printerdrake.pm:2229 printer/printerdrake.pm:2275 #: printer/printerdrake.pm:2342 printer/printerdrake.pm:2377 #, fuzzy, c-format msgid "Could not install the %s packages!" msgstr "Instalasi paket %s" #: printer/printerdrake.pm:1145 #, c-format msgid "Skipping Windows/SMB server auto-detection" msgstr "" #: printer/printerdrake.pm:1151 printer/printerdrake.pm:1296 #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, c-format msgid "Printer auto-detection" msgstr "Deteksi otomatis printer" #: printer/printerdrake.pm:1151 #, c-format msgid "Detecting devices..." msgstr "Deteksi device..." #: printer/printerdrake.pm:1181 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", printer jaringan \"%s\", port %s" #: printer/printerdrake.pm:1184 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", printer \"%s\" di server SMB/Windows \"%s\"" #: printer/printerdrake.pm:1188 #, c-format msgid "Detected %s" msgstr "Terdeteksi %s" #: printer/printerdrake.pm:1193 printer/printerdrake.pm:1220 #: printer/printerdrake.pm:1238 #, c-format msgid "Printer on parallel port #%s" msgstr "Printer di port paralel #%s" #: printer/printerdrake.pm:1199 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Printer jaringan \"%s\", port %s" #: printer/printerdrake.pm:1202 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Printer \"%s\" di server SMB/Windows \"%s\"" #: printer/printerdrake.pm:1283 #, c-format msgid "Local Printer" msgstr "Printer Lokal" #: printer/printerdrake.pm:1284 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Printer tak ditemukan! Untuk menginstal printer secara manual masukkan nama " "alat / file di baris masukan (Port Parallel: /dev/lp0, /dev/lp1, ..., " "sebanding dg LPT1:, LPT2:, ..., printer USB pertama: /dev/usb/lp0, printer " "USB kedua: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1288 #, c-format msgid "You must enter a device or file name!" msgstr "Masukkan nama device atau file!" #: printer/printerdrake.pm:1297 #, c-format msgid "No printer found!" msgstr "Printer tak ditemukan!" #: printer/printerdrake.pm:1305 #, c-format msgid "Local Printers" msgstr "Printer Lokal" #: printer/printerdrake.pm:1306 #, c-format msgid "Available printers" msgstr "Printer yg tersedia" #: printer/printerdrake.pm:1310 printer/printerdrake.pm:1319 #, c-format msgid "The following printer was auto-detected. " msgstr "Printer berikut terdeteksi otomatis. " #: printer/printerdrake.pm:1312 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Jika ini bukan yang ingin dikonfigurasikan, masukkan nama device/file di " "baris masukan" #: printer/printerdrake.pm:1313 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "Abg alternatif, Anda dapat menentukan nama device/file" #: printer/printerdrake.pm:1314 printer/printerdrake.pm:1323 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Berikut adalah daftar printer yg terdeteksi otomatis" #: printer/printerdrake.pm:1316 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "Pilih printer yg ingin diset up atau ketikkan nama device/file" #: printer/printerdrake.pm:1317 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Pilih printer tempat job cetak Anda harus disalurkan atau ketikkan nama " "device/file" #: printer/printerdrake.pm:1321 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" "Konfigurasi printer akan bekerja otomatis. Jika printer Anda tak terdeteksi " "dengan benar atau jika ingin Anda konfigurasi sendiri, jalankan " "\"Konfigurasi manual\"." #: printer/printerdrake.pm:1322 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Saat ini tidak ada kemungkinan lain" #: printer/printerdrake.pm:1325 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" "Pilihlah printer yang ingin diset up. Konfigurasi printer akan bekerja " "otomatis. Jika printer Anda tak terdeteksi dengan benar atau jika ingin Anda " "konfigurasi sendiri, jalankan \"Konfigurasi manual\"." #: printer/printerdrake.pm:1326 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Pilihlah printer tempat job cetak harus disalurkan." #: printer/printerdrake.pm:1328 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Pilih port tempat printer Anda terhubung atau masukkan nama alat/file di " "baris masukan" #: printer/printerdrake.pm:1329 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Pilihlah port tempat printer Anda terhubung." #: printer/printerdrake.pm:1331 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (Port Paralel: /dev/lp0, /dev/lp1, ..., sebanding dengan LPT1:, LPT2:, ..., " "printer USB pertama: /dev/usb/lp0, printer USB kedua: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1335 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Pilih/masukkan printer/device!" #: printer/printerdrake.pm:1375 printer/printerdrake.pm:1437 #: printer/printerdrake.pm:1527 printer/printerdrake.pm:1665 #: printer/printerdrake.pm:1740 printer/printerdrake.pm:1892 #: printer/printerdrake.pm:1978 printer/printerdrake.pm:1987 #: printer/printerdrake.pm:1996 printer/printerdrake.pm:2007 #, fuzzy, c-format msgid "Aborting" msgstr "Batal" #: printer/printerdrake.pm:1410 #, c-format msgid "Remote lpd Printer Options" msgstr "Pilihan printer lpd remote" #: printer/printerdrake.pm:1411 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Untuk memakai printer lpd remote, berikan nama host\n" "server printer dan nama printer di server tsb." #: printer/printerdrake.pm:1412 #, c-format msgid "Remote host name" msgstr "Nama host remote" #: printer/printerdrake.pm:1413 #, c-format msgid "Remote printer name" msgstr "Nama printer remote" #: printer/printerdrake.pm:1416 #, c-format msgid "Remote host name missing!" msgstr "Nama host remote hilang!" #: printer/printerdrake.pm:1420 #, c-format msgid "Remote printer name missing!" msgstr "Nama printer remote hilang!" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 standalone/drakTermServ:1480 #: standalone/drakTermServ:1488 standalone/drakTermServ:1500 #: standalone/drakbackup:512 standalone/drakbackup:618 #: standalone/drakbackup:653 standalone/drakbackup:773 #: standalone/harddrake2:256 #, c-format msgid "Information" msgstr "Info" #: printer/printerdrake.pm:1449 printer/printerdrake.pm:2025 #, c-format msgid "Detected model: %s %s" msgstr "Terdeteksi model: %s %s" #: printer/printerdrake.pm:1531 printer/printerdrake.pm:1785 #, c-format msgid "Scanning network..." msgstr "Jaringan sedang di-scan..." #: printer/printerdrake.pm:1543 printer/printerdrake.pm:1564 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", printer \"%s\" di server \"%s\"" #: printer/printerdrake.pm:1546 printer/printerdrake.pm:1567 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Printer \"%s\" di server \"%s\"" #: printer/printerdrake.pm:1588 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Pilihan printer SMB (windows 95/NT)" #: printer/printerdrake.pm:1589 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Untuk mencetak ke printer SMB, berikan nama host SMB (Catatan! Mungkin " "berbeda dengan nama host TCP/IP) dan mungkin alamat IP server printer, nama " "share printer yang ingin Anda akses, juga nama pengguna, katasandi, dan info " "workgroup." #: printer/printerdrake.pm:1590 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Jika printer yg diinginkan terdeteksi, pilihlah dari daftar lalu tambahkan " "nama pengguna, katasandi, dan/atau grupkerja jika perlu." #: printer/printerdrake.pm:1592 #, c-format msgid "SMB server host" msgstr "Host server SMB" #: printer/printerdrake.pm:1593 #, c-format msgid "SMB server IP" msgstr "IP server SMB" #: printer/printerdrake.pm:1594 #, c-format msgid "Share name" msgstr "Nama share" #: printer/printerdrake.pm:1597 #, c-format msgid "Workgroup" msgstr "Grupkerja" #: printer/printerdrake.pm:1599 #, c-format msgid "Auto-detected" msgstr "Otomatis terdeteksi" #: printer/printerdrake.pm:1609 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Harus ada nama/IP server!" #: printer/printerdrake.pm:1613 #, c-format msgid "Samba share name missing!" msgstr "Nama share Samba hilang!" #: printer/printerdrake.pm:1619 #, c-format msgid "SECURITY WARNING!" msgstr "PERINGATAN KEAMANAN!" #: printer/printerdrake.pm:1620 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Anda akan menset up pencetakan ke account Windows dengan katasandi. " "Berhubung kesalahan arsitekture divais lunak klien Samba, katasandi " "ditampilkan dalam teks di baris perintah klien Samba untuk mengirim job " "cetak ke server Windows. Ini memungkinkan tiap pengguna di komputer ini " "melihat katasandi di layar dengan perintah \"ps auxwww\".\n" "\n" "Kami anjurkan beberapa alternatif berikut (pada semua kasus Anda harus yakin " "bahwa hanya komputer di jaringan lokal Anda yang dapat mengakses server " "Windows Anda, misalnya dengan adanya firewall):\n" "\n" "Pakailah account tanpa-katasandi di server Windows Anda, sebagai account " "\"GUEST\" atau account khusus untuk pencetakan. Jangan hapus proteksi " "katasandi account pribadi atau administrator.\n" "\n" "Set up server Windows Anda agar printer dapat dipakai dengan protokol LPD. " "Laluset up pencetakan dari komputer ini dengan tipe koneksi \"%s\" di " "Printerdrake.\n" "\n" #: printer/printerdrake.pm:1630 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Set up server Windows Anda agar printer tersedia di protokol IPP dan set up " "pencetakan dari komputer ini dengan tipe koneksi \"%s\" di Printerdrake.\n" #: printer/printerdrake.pm:1633 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Hubungkan printer Anda ke server Linux server dan membuat komputer Windows " "terhubung sebagai klien.\n" "\n" "Anda ingin lanjuntukan set up printer ini seperti yang Anda lakukan sekarang?" #: printer/printerdrake.pm:1711 #, c-format msgid "NetWare Printer Options" msgstr "Pilihan printer NetWare" #: printer/printerdrake.pm:1712 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Jika ingin mencetak pakai printer NetWare, berikan nama server printer " "NetWare (tak selalu sama dengan nama TCP/IPnya) juga nama antrian printer " "yang ingin digunakan beserta nama pengguna dan katasandinya." #: printer/printerdrake.pm:1713 #, c-format msgid "Printer Server" msgstr "Server Printer" #: printer/printerdrake.pm:1714 #, c-format msgid "Print Queue Name" msgstr "Nama antrian printer" #: printer/printerdrake.pm:1719 #, c-format msgid "NCP server name missing!" msgstr "Nama server NCP hilang!" #: printer/printerdrake.pm:1723 #, c-format msgid "NCP queue name missing!" msgstr "Nama antrian NCP hilang!" #: printer/printerdrake.pm:1797 printer/printerdrake.pm:1817 #, c-format msgid ", host \"%s\", port %s" msgstr ", host \"%s\", port %s" #: printer/printerdrake.pm:1800 printer/printerdrake.pm:1820 #, c-format msgid "Host \"%s\", port %s" msgstr "Host \"%s\", port %s" #: printer/printerdrake.pm:1841 #, c-format msgid "TCP/Socket Printer Options" msgstr "Opsi Printer TCP/Soket" #: printer/printerdrake.pm:1843 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" "Pilih satu printer dari daftar atau isilah namahost atau IP dan nomor port " "opsional (default 9100)." #: printer/printerdrake.pm:1844 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Untuk mencetak ke printer TCP/socket, berikan nama host atau IP printer dan " "nomor portnya (default 9100). Nomor port server HP JetDirect biasanya 9100, " "server lain mungkin bervariasi. Lihat manual perangkat keras Anda." #: printer/printerdrake.pm:1848 #, c-format msgid "Printer host name or IP missing!" msgstr "Nama host printer atau IP tidak ada!" #: printer/printerdrake.pm:1871 #, c-format msgid "Printer host name or IP" msgstr "Nama host atau IP printer" #: printer/printerdrake.pm:1927 #, fuzzy, c-format msgid "Refreshing Device URI list..." msgstr "Penyegaran data printer..." #: printer/printerdrake.pm:1930 printer/printerdrake.pm:1932 #, c-format msgid "Printer Device URI" msgstr "Device Printer URI" #: printer/printerdrake.pm:1931 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Anda dapat menset langsung URI untuk akses printer. URI harus memenuhi " "spesifikasi CUPS/Foomatic. Ingat, tak semua tipe URI di-support oleh semua " "spooler." #: printer/printerdrake.pm:1957 #, c-format msgid "A valid URI must be entered!" msgstr "Harus diisi URI valid!" #: printer/printerdrake.pm:2060 #, c-format msgid "Pipe into command" msgstr "Pipe ke perintah" #: printer/printerdrake.pm:2061 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" "Anda dapat menentukan perintah sebarang tempat job di-pipe-kan sbg ganti " "pengiriman langsung ke printer." #: printer/printerdrake.pm:2062 #, c-format msgid "Command line" msgstr "Perintah baris" #: printer/printerdrake.pm:2066 #, c-format msgid "A command line must be entered!" msgstr "Perintah baris harus diisi!" #: printer/printerdrake.pm:2104 #, c-format msgid "" "On many HP printers there are special functions available, maintenance (ink " "level checking, nozzle cleaning. head alignment, ...) on all not too old " "inkjets, scanning on multi-function devices, and memory card access on " "printers with card readers. " msgstr "" #: printer/printerdrake.pm:2106 #, c-format msgid "" "To access these extra functions on your HP printer, it must be set up with " "the appropriate software: " msgstr "" #: printer/printerdrake.pm:2107 #, c-format msgid "" "Either with the newer HPLIP which allows printer maintenance through the " "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on " "newer PhotoSmart models " msgstr "" #: printer/printerdrake.pm:2108 #, c-format msgid "" "or with the older HPOJ which allows only scanner and memory card access, but " "could help you in case of failure of HPLIP. " msgstr "" #: printer/printerdrake.pm:2110 #, c-format msgid "What is your choice (choose \"None\" for non-HP printers)? " msgstr "" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2112 #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2144 #: printer/printerdrake.pm:2170 #, fuzzy, c-format msgid "HPLIP" msgstr "PL_IP" #: printer/printerdrake.pm:2111 printer/printerdrake.pm:2114 #: printer/printerdrake.pm:2270 printer/printerdrake.pm:2276 #: printer/printerdrake.pm:2287 #, c-format msgid "HPOJ" msgstr "" #: printer/printerdrake.pm:2119 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony " "IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Printer Anda alat multifungsi dari HP atau Sony (OfficeJet, PSC, LaserJet " "1100/1200/1220/3000/3200/3300/4345 dg scanner, DeskJet 450, Sony IJP-V100), " "HP PhotoSmart atau HP LaserJet 2200?" #: printer/printerdrake.pm:2138 printer/printerdrake.pm:2270 #, c-format msgid "Installing %s package..." msgstr "Instalasi paket %s..." #: printer/printerdrake.pm:2145 printer/printerdrake.pm:2277 #, c-format msgid "Only printing will be possible on the %s." msgstr "" #: printer/printerdrake.pm:2160 #, fuzzy, c-format msgid "Could not remove your old HPOJ configuration file %s for your %s! " msgstr "Tidak dapat membuat direktori konfigurasi gnome per-user %s: %s\n" #: printer/printerdrake.pm:2162 #, c-format msgid "Please remove the file manually and restart HPOJ." msgstr "" #: printer/printerdrake.pm:2170 printer/printerdrake.pm:2287 #, c-format msgid "Checking device and configuring %s..." msgstr "Pengecekan alat dan penyetelan %s..." #: printer/printerdrake.pm:2189 #, fuzzy, c-format msgid "Which printer do you want to set up with HPLIP?" msgstr "Sektor mana yang hendak dipindah" #: printer/printerdrake.pm:2218 printer/printerdrake.pm:2331 #, c-format msgid "Installing SANE packages..." msgstr "Instalasi paket SANE..." #: printer/printerdrake.pm:2231 printer/printerdrake.pm:2344 #, c-format msgid "Scanning on the %s will not be possible." msgstr "" #: printer/printerdrake.pm:2246 #, c-format msgid "Using and Maintaining your %s" msgstr "" #: printer/printerdrake.pm:2371 #, c-format msgid "Installing mtools packages..." msgstr "Instalasi paket mtools..." #: printer/printerdrake.pm:2379 #, fuzzy, c-format msgid "Photo memory card access on the %s will not be possible." msgstr "Akses kartu memori foto pada alat multifungsi HP Anda" #: printer/printerdrake.pm:2395 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Sedang men-scan alat multifungsi HP Anda" #: printer/printerdrake.pm:2404 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "Akses kartu memori foto pada alat multifungsi HP Anda" #: printer/printerdrake.pm:2421 #, fuzzy, c-format msgid "Configuring device..." msgstr "Konfigurasi..." #: printer/printerdrake.pm:2455 #, c-format msgid "Making printer port available for CUPS..." msgstr "Sediakan port printer untuk CUPS..." #: printer/printerdrake.pm:2464 printer/printerdrake.pm:2715 #: printer/printerdrake.pm:2857 #, c-format msgid "Reading printer database..." msgstr "Pembacaan database printer..." #: printer/printerdrake.pm:2674 #, c-format msgid "Enter Printer Name and Comments" msgstr "Masukkan Nama Printer dan Komentar" #: printer/printerdrake.pm:2678 printer/printerdrake.pm:3965 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "Nama printer harus hanya berupa huruf, angka, atau garisbawah" #: printer/printerdrake.pm:2684 printer/printerdrake.pm:3970 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "Sudah ada printer \"%s\", Anda benar ingin menindih konfigurasinya?" #: printer/printerdrake.pm:2691 #, c-format msgid "" "The printer name \"%s\" has more than 12 characters which can make the " "printer unaccessible from Windows clients. Do you really want to use this " "name?" msgstr "" #: printer/printerdrake.pm:2700 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Tiap printer perlu nama (misalnya \"printer\"). Kolom Penjelasan / Lokasi " "tak harus terisi. Itu komentar untuk pengguna." #: printer/printerdrake.pm:2701 #, c-format msgid "Name of printer" msgstr "Nama Printer" #: printer/printerdrake.pm:2702 standalone/drakconnect:570 #: standalone/harddrake2:37 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Description" msgstr "Keterangan" #: printer/printerdrake.pm:2703 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "Location" msgstr "Lokasi" #: printer/printerdrake.pm:2720 #, c-format msgid "Preparing printer database..." msgstr "Persiapan database printer ..." #: printer/printerdrake.pm:2836 #, c-format msgid "Your printer model" msgstr "Model printer Anda" #: printer/printerdrake.pm:2837 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Printerdrake telan membandingkan nama model printer terdeteksi dengan daftar " "model di database untuk menemukan yang paling cocok. Ini mungkin salah, " "khususnya jika printer Anda tak terdaftar di semua database. Periksa apakah " "pilihan sudah benar dan klik \"Model sudah benar\", jika salah, klik \"Pilih " "model secara manual\" sehingga Anda dapat memilih model printer Anda secara " "manual di layar berikut.\n" "\n" "Printerdrake telah menemukan:\n" "\n" "%s" #: printer/printerdrake.pm:2842 printer/printerdrake.pm:2845 #, c-format msgid "The model is correct" msgstr "Model sudah benar" #: printer/printerdrake.pm:2843 printer/printerdrake.pm:2844 #: printer/printerdrake.pm:2847 #, c-format msgid "Select model manually" msgstr "Pilih model secara manual" #: printer/printerdrake.pm:2870 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" "Periksa apakah Printerdrake mendeteksi otomatis model printer Anda dengan " "benar. Cari model yang benar di daftar jika model yang salah atau \"Printer " "raw\" diterangkan." #: printer/printerdrake.pm:2889 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:2920 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:2921 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:2922 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:2923 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:2924 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:2925 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:2927 #, fuzzy, c-format msgid "Install PPD file from" msgstr "Instal rpm" #: printer/printerdrake.pm:2930 printer/printerdrake.pm:2938 #: standalone/scannerdrake:183 standalone/scannerdrake:192 #: standalone/scannerdrake:242 standalone/scannerdrake:250 #, fuzzy, c-format msgid "Floppy Disk" msgstr "Disket" #: printer/printerdrake.pm:2931 printer/printerdrake.pm:2940 #: standalone/scannerdrake:184 standalone/scannerdrake:194 #: standalone/scannerdrake:243 standalone/scannerdrake:252 #, fuzzy, c-format msgid "Other place" msgstr "Port lain" #: printer/printerdrake.pm:2946 #, fuzzy, c-format msgid "Select PPD file" msgstr "Pilih file" #: printer/printerdrake.pm:2950 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:2956 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:2967 #, fuzzy, c-format msgid "Installing PPD file..." msgstr "Instalasi %s ..." #: printer/printerdrake.pm:3084 #, c-format msgid "OKI winprinter configuration" msgstr "Konfigurasi winprinter OKI" #: printer/printerdrake.pm:3085 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Anda sedang melakukan konfigurasi winprinter laser OKI. Printer ini memakai " "protokol komunikasi khusus dan karenanya bekerja hanya saat terhubung port " "paralel pertama. Bila printer Anda terhubung dg port lain atau dengan kotak " "server cetak hubungkan printer dg port paralel pertama sebelum melakukan tes " "cetak. Jika tidak, printer takkan bekerja. Setting tipe koneksi Anda akan " "diabaikan oleh driver." #: printer/printerdrake.pm:3110 printer/printerdrake.pm:3140 #, c-format msgid "Lexmark inkjet configuration" msgstr "Konfigurasi Lexmark inkjet" #: printer/printerdrake.pm:3111 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, " "bukan printer di komputer remote atau kotak server cetak. Hubungkan printer " "Anda ke port lokal atau konfigurasikan di komputer yang terhubung dengannya." #: printer/printerdrake.pm:3141 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Agar dapat mencetak dg Lexmark inkjet dan konfigurasi ini, Anda perlu driver " "printer inkjet yg disediakan Lexmark (http://www.lexmark.com/). Klik link " "\"Drivers\". Pilih model Anda lalu sistem operasi \"Linux\". Driver " "disediakan berupa paket RPM atau shell script dg instalasi grafis " "interaktif. Anda tak perlu melakukan konfigurasi via frontend grafis ini. " "Batalkan langsung setelah persetujuan lisensi. Lalu cetak halaman printhead " "alignment dg \"lexmarkmaintain\" dan cocokkan setting head alignment dg " "program ini." #: printer/printerdrake.pm:3151 #, fuzzy, c-format msgid "Lexmark X125 configuration" msgstr "Konfigurasi Lexmark inkjet" #: printer/printerdrake.pm:3152 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected via " "USB, no printers on remote machines or print server boxes. Please connect " "your printer to a local USB port or configure it on the machine where it is " "connected to." msgstr "" "Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, " "bukan printer di komputer remote atau kotak server cetak. Hubungkan printer " "Anda ke port lokal atau konfigurasikan di komputer yang terhubung dengannya." #: printer/printerdrake.pm:3174 #, fuzzy, c-format msgid "Samsung ML/QL-85G configuration" msgstr "Konfigurasi suara" #: printer/printerdrake.pm:3175 printer/printerdrake.pm:3202 #, fuzzy, c-format msgid "" "The driver for this printer only supports printers locally connected on the " "first parallel port, no printers on remote machines or print server boxes or " "on other parallel ports. Please connect your printer to the first parallel " "port or configure it on the machine where it is connected to." msgstr "" "Driver printer inkjet yg disediakan Lexmark hanya men-support printer lokal, " "bukan printer di komputer remote atau kotak server cetak. Hubungkan printer " "Anda ke port lokal atau konfigurasikan di komputer yang terhubung dengannya." #: printer/printerdrake.pm:3201 #, fuzzy, c-format msgid "Canon LBP-460/660 configuration" msgstr "Konfigurasi manual" #: printer/printerdrake.pm:3220 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "Firmware-Upload untuk HP LaserJet 1000" #: printer/printerdrake.pm:3369 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Setting standar printer\n" "\n" "Cek ukuran halaman dan jenis tinta/mode cetak (jika ada) juga konfigurasi " "perangkat keras printer laser (memori, unit duplex, tray extra). Ingat, " "pencetakan dg kualitas tinggi berjalan amat lambat." #: printer/printerdrake.pm:3494 #, c-format msgid "Printer default settings" msgstr "Setting default printer" #: printer/printerdrake.pm:3501 #, c-format msgid "Option %s must be an integer number!" msgstr "Opsi %s harus berupa integer!" #: printer/printerdrake.pm:3505 #, c-format msgid "Option %s must be a number!" msgstr "Opsi %s harus berupa bilangan!" #: printer/printerdrake.pm:3509 #, c-format msgid "Option %s out of range!" msgstr "Opsi %s keluar batas!" #: printer/printerdrake.pm:3560 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Ingin menset printer ini (\"%s\")\n" "sbg printer standar?" #: printer/printerdrake.pm:3575 #, c-format msgid "Test pages" msgstr "Halaman tes" #: printer/printerdrake.pm:3576 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Pilihlah halaman tes yang ingin Anda cetak.\n" "Ingat: halaman tes photo perlu waktu lama untuk dicetak. Di printer laser " "bermemori rendah itu bahkan takkan muncul. Umumnya cukup halaman tes standar." #: printer/printerdrake.pm:3580 #, c-format msgid "No test pages" msgstr "Tiada halaman tes" #: printer/printerdrake.pm:3581 #, c-format msgid "Print" msgstr "Cetak" #: printer/printerdrake.pm:3606 #, c-format msgid "Standard test page" msgstr "Halaman tes standar" #: printer/printerdrake.pm:3609 #, c-format msgid "Alternative test page (Letter)" msgstr "Halaman tes alternatif (Letter)" #: printer/printerdrake.pm:3612 #, c-format msgid "Alternative test page (A4)" msgstr "Halaman tes alternatif (A4)" #: printer/printerdrake.pm:3614 #, c-format msgid "Photo test page" msgstr "Halaman tes foto" #: printer/printerdrake.pm:3618 #, c-format msgid "Do not print any test page" msgstr "Jangan cetak halaman tes" #: printer/printerdrake.pm:3626 printer/printerdrake.pm:3809 #, c-format msgid "Printing test page(s)..." msgstr "Pencetakan halaman tes..." #: printer/printerdrake.pm:3646 #, fuzzy, c-format msgid "Skipping photo test page." msgstr "Halaman tes foto" #: printer/printerdrake.pm:3663 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Halaman tes telah dikirim ke printer.\n" "Akan butuh waktu sebentar untuk mulai mencetak.\n" "Status cetak:\n" "%s\n" "\n" #: printer/printerdrake.pm:3667 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Halaman test telah dikirim ke printer.\n" "Akan butuh waktu sebentar untuk mulai mencetak.\n" #: printer/printerdrake.pm:3677 #, c-format msgid "Did it work properly?" msgstr "Bekerja dg baik?" #: printer/printerdrake.pm:3700 printer/printerdrake.pm:5049 #, c-format msgid "Raw printer" msgstr "Printer raw" #: printer/printerdrake.pm:3738 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Utk mencetak file dari baris perintah (window terminal) pakailah komando " "komando \"%s \" atau alat cetak grafis: \"xpp \" atau \"kprinter " "\". Alat grafis memungkinkan Anda memilih printer dan memodifikasi " "setting dengan mudah.\n" #: printer/printerdrake.pm:3740 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Komando ini dapat Anda pakai dalam kotak \"Perintah cetak\" dialog cetak di " "banyak aplikasi, tapi jangan berikan nama file di sini karena file yang " "dicetak akan diberikan oleh aplikasi.\n" #: printer/printerdrake.pm:3743 printer/printerdrake.pm:3760 #: printer/printerdrake.pm:3770 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Komando \"%s\" juga memungkinkan modifikasi setting job cetak tertentu. " "Tambahkan setting yang diinginkan ke baris perintah, mis. \"%s \". " #: printer/printerdrake.pm:3746 printer/printerdrake.pm:3786 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Untuk mengetahui opsi printer bacalah daftar di bawah atau klik tombol " "\"Daftar opsi cetak\".%s%s%s\n" "\n" #: printer/printerdrake.pm:3750 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Daftar opsi cetak tersedia untuk printer ini:\n" "\n" #: printer/printerdrake.pm:3755 printer/printerdrake.pm:3765 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Utk mencetak file dari baris komando (window terminal) gunakan perintah \"%s " "\".\n" #: printer/printerdrake.pm:3757 printer/printerdrake.pm:3767 #: printer/printerdrake.pm:3777 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Perintah ini digunakan di kotak \"Perintah cetak\" di dialog cetak beberapa " "aplikasi. Tapi jangan berikan nama file di sini karena file yg dicetak akan " "diberikan oleh aplikasi.\n" #: printer/printerdrake.pm:3762 printer/printerdrake.pm:3772 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "Untuk mendapat daftar opsi printer klik \"Daftar opsi cetak\"." #: printer/printerdrake.pm:3775 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Utk mencetak file dari baris komando (jendela terminal) gunakan komando \"%s " "\" atau \"%s \".\n" #: printer/printerdrake.pm:3779 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Anda juga dapat memakai antarmuka grafis \"xpdq\" untuk setting opsi dan " "kontrol job cetak.\n" "Jika KDE Anda pakai sbg lingkungan desktop Anda punya ikon \"tombol panik\", " "di desktop, berlabel \"STOP Printer!\", yang menghentikan semua job cetak " "seketika bila Anda tekan. Ini berguna contohnya saat kertas macet.\n" #: printer/printerdrake.pm:3783 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "Komando \"%s\" dan \"%s\" juga memungkinkan modifikasi setting opsi job " "cetak tertentu. Tambahkan setting yg diinginkan ke baris perintah, misalnya " "\"%s \".\n" #: printer/printerdrake.pm:3793 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Cetak/Scan/Kartu Foto di \"%s\"" #: printer/printerdrake.pm:3794 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Cetak/Scan di \"%s\"" #: printer/printerdrake.pm:3796 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Cetak/Akses Kartu Foto di \"%s\"" #: printer/printerdrake.pm:3798 #, fuzzy, c-format msgid "Using/Maintaining the printer \"%s\"" msgstr "Pencetakan di printer \"%s\"" #: printer/printerdrake.pm:3799 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Pencetakan di printer \"%s\"" #: printer/printerdrake.pm:3805 #, c-format msgid "Print option list" msgstr "Daftar opsi cetak" #: printer/printerdrake.pm:3827 #, c-format msgid "" "Your %s is set up with HP's HPLIP driver software. This way many special " "features of your printer are supported.\n" "\n" msgstr "" #: printer/printerdrake.pm:3830 #, c-format msgid "" "The scanner in your printer can be used with the usual SANE software, for " "example Kooka or XSane (Both in the Multimedia/Graphics menu). " msgstr "" #: printer/printerdrake.pm:3831 #, c-format msgid "" "Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share " "your scanner on the network.\n" "\n" msgstr "" #: printer/printerdrake.pm:3835 #, c-format msgid "" "The memory card readers in your printer can be accessed like a usual USB " "mass storage device. " msgstr "" #: printer/printerdrake.pm:3836 #, c-format msgid "" "After inserting a card a hard disk icon to access the card should appear on " "your desktop.\n" "\n" msgstr "" #: printer/printerdrake.pm:3838 #, c-format msgid "" "The memory card readers in your printer can be accessed using HP's Printer " "Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access " "Photo Cards...\" button on the \"Functions\" tab. " msgstr "" #: printer/printerdrake.pm:3839 #, c-format msgid "" "Note that this is very slow, reading the pictures from the camera or a USB " "card reader is usually faster.\n" "\n" msgstr "" #: printer/printerdrake.pm:3842 #, c-format msgid "" "HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a " "lot of status monitoring and maintenance functions for your %s:\n" "\n" msgstr "" #: printer/printerdrake.pm:3843 #, c-format msgid " - Ink level/status info\n" msgstr "" #: printer/printerdrake.pm:3844 #, c-format msgid " - Ink nozzle cleaning\n" msgstr "" #: printer/printerdrake.pm:3845 #, c-format msgid " - Print head alignment\n" msgstr "" #: printer/printerdrake.pm:3846 #, fuzzy, c-format msgid " - Color calibration\n" msgstr "Konfigurasi warna" #: printer/printerdrake.pm:3861 #, fuzzy, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "You do not need to run \"scannerdrake\" for setting up scanning on this " "device, you only need to use \"scannerdrake\" if you want to share the " "scanner on the network." msgstr "" "Alat multifungsi Anda terkonfigurasi otomatis agar dapat men-scan. Kini Anda " "dapat men-scan dg \"scanimage\" (\"scanimage -d hp:%s\" untuk menentukan " "scanner jika Anda punya beberapa) dari baris perintah atau dg antarmuka " "grafis \"xscanimage\" atau \"xsane\". Jika Anda memakai GIMP, Anda dapat " "juga men-scan dg memilih poin yg sesuai di menu \"File\"/\"Acquire\". " "Panggil \"man scanimage\" di baris perintah untuk informasi lanjut.\n" "\n" "Jangan pakai \"scannerdrake\" untuk alat ini!" #: printer/printerdrake.pm:3887 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Printer Anda telah dikonfigurasikan secara otomatis untuk mengakses drive " "kartu foto dari PC Anda. Kini Anda dapat mengakses kartu foto Anda dg " "program grafis \"MtoolsFM\" (Menu: \"Aplikasi\" -> \"Perkakas File\" -> " "\"Manajer File MTools\") atau baris komando \"mtools\" (ketik \"man mtools\" " "di baris komando untuk info lebih lanjut). Anda temukan sistem file kartu di " "drive \"p:\", atau huruf drive selanjutnya bila Anda punya lebih dari satu " "printer HP dengan drive kartu foto. Di \"MtoolsFM\" Anda dapat men-switch " "drive dg isian di sudut kanan atas daftar file." #: printer/printerdrake.pm:3929 printer/printerdrake.pm:3956 #: printer/printerdrake.pm:3991 #, c-format msgid "Transfer printer configuration" msgstr "Transfer konfigurasi printer" #: printer/printerdrake.pm:3930 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "Anda dapat menyalin konfigurasi printer yg Anda buat untuk spooler %s ke %s, " "spooler Anda sekarang. Semua data konfigurasi (nama printer, keterangan, " "lokasi, tipe koneksi, dan setting opsi default) disamakan, tapi job takkan " "ditransfer. \n" "Tak semua antrian dapat ditransfer karena alasan berikut:\n" #: printer/printerdrake.pm:3933 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "CUPS tak men-support printer server Novell atau printer yg mengirim data ke " "perintah format-bebas.\n" #: printer/printerdrake.pm:3935 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "PDQ hanya men-support printer lokal, LPD remote, dan Soket/TCP.\n" #: printer/printerdrake.pm:3937 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD and LPRng tak men-support printer IPP.\n" #: printer/printerdrake.pm:3939 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Antrian tak dibuat oleh program ini atau \"foomatic-configure\" tak dapat " "ditransfer." #: printer/printerdrake.pm:3940 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Juga printer yg terkonfigurasi dengan file PPD dari pabrik atau driver CUPS " "asli tak dapat ditransfer." #: printer/printerdrake.pm:3941 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Tandai printer yg ingin Anda transfer lalu klik\"Transfer\"." #: printer/printerdrake.pm:3944 #, c-format msgid "Do not transfer printers" msgstr "Jangan transfer printer" #: printer/printerdrake.pm:3945 printer/printerdrake.pm:3961 #, c-format msgid "Transfer" msgstr "Transfer" #: printer/printerdrake.pm:3957 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Printer bernama \"%s\" telah ada di %s. \n" "Klik \"Transfer\" untuk menindihnya.\n" "Anda juga dapat menuliskan nama baru atau melewatkan printer ini." #: printer/printerdrake.pm:3978 #, c-format msgid "New printer name" msgstr "Nama printer baru" #: printer/printerdrake.pm:3981 #, c-format msgid "Transferring %s..." msgstr "Pemindahan %s ..." #: printer/printerdrake.pm:3992 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "Anda telah men-transfer printer standar lama Anda (\"%s\"), Akankah ia juga " "dijadikan printer default pada sistem cetak baru %s?" #: printer/printerdrake.pm:4002 #, c-format msgid "Refreshing printer data..." msgstr "Penyegaran data printer..." #: printer/printerdrake.pm:4011 #, c-format msgid "Starting network..." msgstr "Pemulaian network..." #: printer/printerdrake.pm:4054 printer/printerdrake.pm:4058 #: printer/printerdrake.pm:4060 #, c-format msgid "Configure the network now" msgstr "Konfigurasikan jaringan sekarang" #: printer/printerdrake.pm:4055 #, c-format msgid "Network functionality not configured" msgstr "Fungsi network tak dikonfigurasi" #: printer/printerdrake.pm:4056 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Anda akan melakukan konfigurasi printer remote. Ini memerlukan akses " "jaringan aktif, tapi konfigurasi jaringan Anda belum ada. Jika diteruskan " "tanpa konfigurasi network, Anda takkan dapat menggunakan printer yang Anda " "konfigurasikan sekarang. Bagaimana Anda mau teruskan?" #: printer/printerdrake.pm:4059 #, c-format msgid "Go on without configuring the network" msgstr "Jalan tanpa konfigurasi jaringan" #: printer/printerdrake.pm:4094 #, fuzzy, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessible after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "Konfigurasi network yang dilakukan saat instalasi kini tak dapat jalan. " "Tolong cek apakah network dapat diakses setelah sistem diboot dan betulkan " "konfigurasi dengan Pusat Kontrol Mandrake, bagian \"Network & Internet\"/" "\"Koneksi\", lalu set printer juga dg Pusat Kontrol Mandrake, bagian " "\"Hardware\"/\"Printer\"" #: printer/printerdrake.pm:4095 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Akses network tak jalan dan tak dapat dimulai. Cek konfigurasi dan hardware " "Anda, lalu coba konfigurasikan printer remote Anda lagi." #: printer/printerdrake.pm:4105 #, c-format msgid "Restarting printing system..." msgstr "Mulai ulang sistem cetak ..." #: printer/printerdrake.pm:4135 #, c-format msgid "high" msgstr "tinggi" #: printer/printerdrake.pm:4135 #, c-format msgid "paranoid" msgstr "penakut" #: printer/printerdrake.pm:4137 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Instalasi sistem cetak dalam level keamanan %s" #: printer/printerdrake.pm:4138 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessible by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Anda akan menginstal sistem cetak %s di sistem dg level keamanan %s.\n" "\n" "Sistem cetak ini menjalankan daemon (proses background) yang menunggu dan " "memproses job cetak. Daemon ini juga dapat diakses oleh komputer remote via " "network jadi ia juga bisa jadi sasaran serangan. Karenanya hanya sedikit " "daemon terpilih yg dijalankan dlm level sekuriti ini.\n" "\n" "Benarkah Anda ingin mengkonfigurasikan printer di komputer ini?" #: printer/printerdrake.pm:4173 #, c-format msgid "Starting the printing system at boot time" msgstr "Inisiasi sistem cetak pada saat boot" #: printer/printerdrake.pm:4174 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Sistem cetak (%s) takkan otomatis jalan saat komputer diboot.\n" "\n" "Sebabnya mungkin auto-start dimatikan sbg implikasi level sekuriti tinggi, " "karena sistem cetak potensial diserang.\n" "\n" "Anda ingin auto-start sistem cetak dinyalakan lagi?" #: printer/printerdrake.pm:4196 #, c-format msgid "Checking installed software..." msgstr "Pemeriksaan perangkat lunak terinstal" #: printer/printerdrake.pm:4202 #, c-format msgid "Removing %s..." msgstr "Hapus %s ..." #: printer/printerdrake.pm:4206 #, fuzzy, c-format msgid "Could not remove the %s printing system!" msgstr "Ubah sistem cetak" #: printer/printerdrake.pm:4222 #, c-format msgid "Installing %s..." msgstr "Instalasi %s ..." #: printer/printerdrake.pm:4226 #, fuzzy, c-format msgid "Could not install the %s printing system!" msgstr "Ubah sistem cetak" #: printer/printerdrake.pm:4293 #, c-format msgid "" "In this mode there is no local printing system, all printing requests go " "directly to the server specified below. Note that it is not possible to " "define local print queues then and if the specified server is down it cannot " "be printed at all from this machine." msgstr "" #: printer/printerdrake.pm:4295 #, c-format msgid "" "Enter the host name or IP of your CUPS server and click OK if you want to " "use this mode, click \"Quit\" otherwise." msgstr "" #: printer/printerdrake.pm:4309 #, fuzzy, c-format msgid "Name or IP of remote server:" msgstr "Printer di server lpd remote" #: printer/printerdrake.pm:4329 #, c-format msgid "Setting Default Printer..." msgstr "Setting printer standar..." #: printer/printerdrake.pm:4348 #, fuzzy, c-format msgid "Local CUPS printing system or remote CUPS server?" msgstr "Printer di server CUPS remote" #: printer/printerdrake.pm:4349 #, c-format msgid "The CUPS printing system can be used in two ways: " msgstr "" #: printer/printerdrake.pm:4351 #, c-format msgid "1. The CUPS printing system can run locally. " msgstr "" #: printer/printerdrake.pm:4352 #, c-format msgid "" "Then locally connected printers can be used and remote printers on other " "CUPS servers in the same network are automatically discovered. " msgstr "" #: printer/printerdrake.pm:4353 #, c-format msgid "" "Disadvantage of this approach is, that more resources on the local machine " "are needed: Additional software packages need to be installed, the CUPS " "daemon has to run in the background and needs some memory, and the IPP port " "(port 631) is opened. " msgstr "" #: printer/printerdrake.pm:4355 #, c-format msgid "2. All printing requests are immediately sent to a remote CUPS server. " msgstr "" #: printer/printerdrake.pm:4356 #, c-format msgid "" "Here local resource occupation is reduced to a minimum. No CUPS daemon is " "started or port opened, no software infrastructure for setting up local " "print queues is installed, so less memory and disk space is used. " msgstr "" #: printer/printerdrake.pm:4357 #, c-format msgid "" "Disadvantage is that it is not possible to define local printers then and if " "the specified server is down it cannot be printed at all from this machine. " msgstr "" #: printer/printerdrake.pm:4359 #, c-format msgid "How should CUPS be set up on your machine?" msgstr "" #: printer/printerdrake.pm:4363 printer/printerdrake.pm:4378 #: printer/printerdrake.pm:4382 printer/printerdrake.pm:4388 #, c-format msgid "Remote server, specify Name or IP here:" msgstr "" #: printer/printerdrake.pm:4377 #, fuzzy, c-format msgid "Local CUPS printing system" msgstr "Ubah sistem cetak" #: printer/printerdrake.pm:4415 #, c-format msgid "Select Printer Spooler" msgstr "Pilih spooler printer" #: printer/printerdrake.pm:4416 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Sistem (spooler) printer mana yang ingin digunakan?" #: printer/printerdrake.pm:4464 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Konfigurasi printer \"%s\" gagal!" #: printer/printerdrake.pm:4478 #, c-format msgid "Installing Foomatic..." msgstr "Instalasi Foomatic ..." #: printer/printerdrake.pm:4484 #, c-format msgid "Could not install %s packages, %s cannot be started!" msgstr "" #: printer/printerdrake.pm:4674 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "Printer berikut telah dikonfigurasikan. Klik-dobel printer untuk " "memodifikasi setting; membuatnya printer default; atau melihat info " "tentangnya." #: printer/printerdrake.pm:4704 #, c-format msgid "Display all available remote CUPS printers" msgstr "Tampilkan semua printer CUPS remote" #: printer/printerdrake.pm:4705 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Penyegaran daftar printer (untuk menampilkan semua printer CUPS remote)" #: printer/printerdrake.pm:4716 #, c-format msgid "CUPS configuration" msgstr "konfigurasi CUPS" #: printer/printerdrake.pm:4728 #, c-format msgid "Change the printing system" msgstr "Ubah sistem cetak" #: printer/printerdrake.pm:4737 #, c-format msgid "Normal Mode" msgstr "Modus Normal" #: printer/printerdrake.pm:4738 #, c-format msgid "Expert Mode" msgstr "Mode Ahli" #: printer/printerdrake.pm:4992 printer/printerdrake.pm:5050 #: printer/printerdrake.pm:5128 printer/printerdrake.pm:5137 #, c-format msgid "Printer options" msgstr "Opsi printer" #: printer/printerdrake.pm:5028 #, c-format msgid "Modify printer configuration" msgstr "Modifikasi konfigurasi printer" #: printer/printerdrake.pm:5030 #, c-format msgid "" "Printer %s%s\n" "What do you want to modify on this printer?" msgstr "" "Printer %s%s\n" "Apa yg Anda inginkan untuk modifikasi printer ini?" #: printer/printerdrake.pm:5035 #, fuzzy, c-format msgid "This printer is disabled" msgstr "Ukuran partisi ini tidak dapat diubah" #: printer/printerdrake.pm:5037 #, c-format msgid "Do it!" msgstr "Kerjakan!" #: printer/printerdrake.pm:5042 printer/printerdrake.pm:5097 #, c-format msgid "Printer connection type" msgstr "Tipe koneksi printer" #: printer/printerdrake.pm:5043 printer/printerdrake.pm:5103 #, c-format msgid "Printer name, description, location" msgstr "Nama, penjelasan, lokasi printer" #: printer/printerdrake.pm:5045 printer/printerdrake.pm:5121 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Pembuat, model, driver printer" #: printer/printerdrake.pm:5046 printer/printerdrake.pm:5122 #, c-format msgid "Printer manufacturer, model" msgstr "Pembuat, model printer" #: printer/printerdrake.pm:5052 printer/printerdrake.pm:5132 #, c-format msgid "Set this printer as the default" msgstr "Set printer ini sebagai standar" #: printer/printerdrake.pm:5057 printer/printerdrake.pm:5138 #: printer/printerdrake.pm:5140 #, fuzzy, c-format msgid "Enable Printer" msgstr "Aktifkan Server" #: printer/printerdrake.pm:5060 printer/printerdrake.pm:5143 #: printer/printerdrake.pm:5145 #, fuzzy, c-format msgid "Disable Printer" msgstr "Pasifkan Server" #: printer/printerdrake.pm:5061 printer/printerdrake.pm:5148 #, c-format msgid "Print test pages" msgstr "Cetak halaman tes" #: printer/printerdrake.pm:5062 printer/printerdrake.pm:5150 #, c-format msgid "Learn how to use this printer" msgstr "Belajar cara pakai printer ini" #: printer/printerdrake.pm:5063 printer/printerdrake.pm:5152 #, c-format msgid "Remove printer" msgstr "Hapus printer" #: printer/printerdrake.pm:5110 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Menghapus printer lama \"%s\"..." #: printer/printerdrake.pm:5141 #, fuzzy, c-format msgid "Printer \"%s\" is now enabled." msgstr "Printer \"%s\" di server \"%s\"" #: printer/printerdrake.pm:5146 #, fuzzy, c-format msgid "Printer \"%s\" is now disabled." msgstr "Internet Connection Sharing telah dimatikan" #: printer/printerdrake.pm:5183 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Anda ingin menghapus printer \"%s\"?" #: printer/printerdrake.pm:5187 #, c-format msgid "Removing printer \"%s\"..." msgstr "Menghapus printer \"%s\"..." #: printer/printerdrake.pm:5211 #, c-format msgid "Default printer" msgstr "Printer standar" #: printer/printerdrake.pm:5212 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Printer \"%s\" kini diset sbg printer standar." #: raid.pm:42 #, fuzzy, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Tidak dapat menambah partisi ke RAID md%d yang terformat" #: raid.pm:144 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Partisi tidak cukup untuk level RAID %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:107 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "" #: scanner.pm:114 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:121 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 #: standalone/scannerdrake:78 standalone/scannerdrake:346 #: standalone/scannerdrake:382 standalone/scannerdrake:446 #: standalone/scannerdrake:490 standalone/scannerdrake:494 #: standalone/scannerdrake:516 standalone/scannerdrake:581 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:201 standalone/scannerdrake:947 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:202 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "Terima/Tolak pesan error IPv4 yg tak benar." #: security/help.pm:13 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "Terima/Tolak echo icmp tersiar." #: security/help.pm:15 #, c-format msgid " Accept/Refuse icmp echo." msgstr "Terima/Tolak echo icmp." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "Izinkan/Larang autologin." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, fuzzy, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Argumen: (arg)\n" "\n" "\\fIarg\\fP = ALL mengizinkan adanya /etc/issue dan /etc/issue.net. \\fIarg" "\\fP = NONE tak ada issues\n" "diizinkan selebihnya hanya /etc/issue diizinkan." #: security/help.pm:27 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "Izinkan/Larang reboot oleh pengguna konsol." #: security/help.pm:29 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "" "Argumen: (arg)\n" "\n" "Izinkan/Larang login root remote." #: security/help.pm:31 #, c-format msgid "Allow/Forbid direct root login." msgstr "Izinkan/Larang login root langsung." #: security/help.pm:33 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" "Izinkan/Larang daftar pengguna sistem di manajer display (kdm dan gdm)." #: security/help.pm:35 #, c-format msgid "" "Allow/forbid to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" #: security/help.pm:40 #, fuzzy, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "Argumen: (arg, listen_tcp=None)\n" "\n" "Izinkan/Larang koneksi X. Arg pertama menunjukkan apa yg dilakukan\n" "di sisi klien: ALL (semua koneksi diizinkan), LOCAL (hanya\n" "koneksi lokal) and NONE (tanpa koneksi)." #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Argumen menentukan apakah klien diizinkan berhubungan dg\n" "server X di port tcp 6000 atau tidak." #. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Sahkan:\n" "\n" "- semua servis yg dikontrol oleh tcp_wrappers (lihat manual hosts.deny(5)) " "jika diset \"SEMUA\",\n" "\n" "- hanya yg lokal jika diset ke \"LOKAL\"\n" "\n" "- tak satu-pun jika diset ke \"TIADA\".\n" "\n" "Utk mensahkan servis yg dibutuhkan, gunakan /etc/hosts.allow (lihat hosts." "allow(5))." #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Jika SERVER_LEVEL (atau SECURE_LEVEL jika tidak ada) lebih besar daripada 3\n" "di /etc/security/msec/security.conf, buat symlink /etc/security/msec/server\n" "merujuk /etc/security/msec/server.. \n" "\n" "/etc/security/msec/server dipakai oleh chkconfig --add untuk menambahkan\n" "servis jika terdapat di file selama instalasi paket." #: security/help.pm:72 #, fuzzy, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Argumen: (arg)\n" "\n" "Aktifkan/Matikan crontab dan at untuk pengguna. Taruh pengguna berizin di\n" "/etc/cron.allow dan /etc/at.allow\n" "(lihat man at(1) dan crontab(1))." #: security/help.pm:77 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "Aktifkan/Matikan laporan syslog ke konsol 12" #: security/help.pm:79 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" "Aktifkan/Matikan proteksi pemalsuan resolusi nama.\n" "Jika \"%s\" = true, juga lapor ke syslog." #: security/help.pm:80 standalone/draksec:213 #, c-format msgid "Security Alerts:" msgstr "Pemberitahuan Keamanan:" #: security/help.pm:82 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "Aktifkan/Matikan proteksi pemalsuan IP." #: security/help.pm:84 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem" #: security/help.pm:86 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "Aktifkan/Matikan pencatatan paket aneh IPv4." #: security/help.pm:88 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "Aktifkan/Matikan cek keamanan tiap jam oleh msec." #: security/help.pm:90 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna." #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "Pakai katasandi untuk membuktikan keaslian pengguna." #: security/help.pm:94 #, fuzzy, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" "Argumen: (arg)\n" "\n" "Aktifkan/Matikan pengecekan kekacauan kartu ethernet." #: security/help.pm:96 #, c-format msgid " Activate/Disable daily security check." msgstr "Aktifkan/Matikan cek keamanan harian." #: security/help.pm:98 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "Izinkan/Tolak sulogin(8) dalam level pengguna single." #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "Tambahkan nama sbg eksepsi penanganan umur katasandi dg msec." #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "Set umur katasandi \"max\" hari dan delay \"inactice\"." #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Set panjang riwayat katasandi untuk mencegah penggunaan ulang katasandi." #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "Set panjang minimum, jumlah minimum digit dan huruf besar katasandi." #: security/help.pm:108 #, c-format msgid "Set the root umask." msgstr "Set umask root." #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "Jika diset ke ya, cek port yg terbuka." #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "jika ya, cek :\n" "\n" "- katasandi kosong,\n" "\n" "- katasandi kosong di /etc/shadow\n" "\n" "- pengguna dg id 0 yg bukan root." #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "jika diset ya, cek izin file-file di home pengguna." #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "jika ya, cek apakah divais jaringan berada dalam modus promiscuous." #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "jika ya, jalankan cek keamanan harian." #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "Jika diset ke ya, cek penambahan/penghapusan file sgid." #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "jika diset ya, cek katasandi kosong di /etc/shadow." #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "jika ya, lakukan checksum file suid/sgid." #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "jika diset ya, cek tambahan/hapusan file root suid." #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "jika diset ya, laporkan file tak bertuan." #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "jika ya, cek file/direktori agar dapat ditulisi oleh semua orang." #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "Jika diset ya, jalankan cek chkrootkit." #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root." #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "jika diset ke ya, laporkan hasil cek dg mail." #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "jika diset ya, cek database rpm" #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "jika ya, laporkan hasil cek ke syslog." #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "jika diset ya, laporkan hasil cek ke tty." #: security/help.pm:134 #, fuzzy, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Argumen: (ukuran)\n" "\n" "Set ukuran riwayat perintah cangkang. -1 berarti tak terbatas." #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "Set timeout cangkang (shell). Nol = tidak ada timeout." #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:138 #, c-format msgid "Set the user umask." msgstr "Set umask pengguna." #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "Terima pesan error IPv4 yg tak benar" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Terima echo icmp tersiar" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "Terima mode icmp" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "ada /etc/issue*" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "Reboot oleh pengguna konsol" #: security/l10n.pm:17 #, fuzzy, c-format msgid "Allow remote root login" msgstr "" "Argumen: (arg)\n" "\n" "Izinkan/Larang login root remote." #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "Login root langsung" #: security/l10n.pm:19 #, fuzzy, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" "Argumen: (arg)\n" "\n" "Izinkan/Larang daftar pengguna sistem di manajer display (kdm dan gdm)." #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "" #: security/l10n.pm:21 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "Koneksi winmodem" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Sahkan koneksi TCP X Window" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Sahkan semua servis yg dikontrol oleh tcp_wrappers" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig mematuhi aturan msec" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "Aktifkan \"crontab\" dan \"at\" untuk pengguna" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "Syslog dilaporkan ke konsol 12" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "Proteksi penipuan nama" #: security/l10n.pm:28 #, fuzzy, c-format msgid "Enable IP spoofing protection" msgstr "" "Argumen: (arg, alert=1)\n" "\n" "Aktifkan/Matikan proteksi pemalsuan IP." #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Aktifkan/Matikan libsafe jika libsafe ditemukan di sistem" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "Aktifkan pencatatan paket aneh IPv4" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "Aktifkan cek keamanan perjam oleh msec" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "Izinkan su hanya bagi anggota grup wheel atau izinkan semua pengguna" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Pakai katasandi untuk pembuktian pengguna" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Cek kekacauan kartu ethernet" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "Cek keamanan harian" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) dalam level pengguna single" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "Tidak ada penuaan katasandi untuk" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Set kadaluarsa katasandi dan delay penonaktifan account" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Panjang sejarah katasandi" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Panjang minimum katasandi serta jumlah digit dan huruf besar" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Umask root" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Ukuran sejarah cangkang" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Timeout cangkang (shell)" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "Umask pengguna" #: security/l10n.pm:45 #, fuzzy, c-format msgid "Check open ports" msgstr "dideteksi pada port %s" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "Cek account tak terjaga" #: security/l10n.pm:47 #, fuzzy, c-format msgid "Check permissions of files in the users' home" msgstr "jika diset ya, cek izin file-file di home pengguna." #: security/l10n.pm:48 #, fuzzy, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "jika ya, cek apakah divais jaringan berada dalam modus promiscuous." #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Jalankan cek keamanan harian" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "Cek penambahan/penghapusan file sgid" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Cek katasandi kosong di /etc/shadow" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Verifikasi checksum file suid/sgid" #: security/l10n.pm:53 #, fuzzy, c-format msgid "Check additions/removals of suid root files" msgstr "jika diset ya, cek tambahan/hapusan file root suid." #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "Laporkan file tak bertuan" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "Cek file/direktori yg dapat ditulisi oleh semua orang" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "Jalankan cek chkrootkit" #: security/l10n.pm:57 #, c-format msgid "Do not send mails when unneeded" msgstr "Jangan kirim mail jika tak perlu" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Jika diset, kirim laporan ke alamat email ini, jika tidak, kirim ke root." #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "Laporkan hasil cek via mail" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "Cek database rpm" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Laporkan hasil cek ke syslog" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "Laporkan hasil cek ke tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Selamat Datang di Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Lemah" #: security/level.pm:13 #, c-format msgid "High" msgstr "Kuat" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Lebih Kuat" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Penakut" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Level ini harus digunakan hati-hati. Ia akan membuat sistem Anda akan mudah\n" "digunakan, tapi sangat sensitif: komputer ini tidak boleh digunakan untuk\n" "komputer yang terhubung ke komputer lain atau ke Internet. Tidak akan ada\n" "akses katasandi." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "Katasandi akan diaktifkan, tapi mohon jangan disambungkan ke jaringan." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Ini adalah sekuriti standar, dianjurkan untuk komputer yang akan\n" "terkoneksi ke Internet sebagai klien." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Sudah ada beberapa batasan, dan beberapa pengecekan otomatis berjalan tiap " "malam." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Dengan level sekuriti ini, sistem akan dapat digunakan sebagai server.\n" "Sekuriti kini cukup tinggi untuk dapat melayani koneksi banyak klien.\n" "Jika komputer Anda hanya berfungsi sebagai klien, pilihlah level lebih " "rendah." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Sama dengan level sebelumnya, tapi sistem sepenuhnya ditutup.\n" "Fitur sekuriti maksimum." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "Opsi Dasar DrakSec" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Pilih tingkat keamanan yg Anda inginkan" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Tingkat keamanan" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Gunakan libsafe untuk server" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "Library penahan serangan string format dan overflow buffer" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "Admin Keamanan (login / email)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Luncurkan sistem suara ALSA (Advanced Linux Sound Architecture)" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Skeduler command periodik, Anacron" #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "apmd digunakan untuk monitoring status batere dan mencatatnya di syslog.\n" "apmd juga bisa untuk mematikan komputer waktu baterenya habis." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Menjalankan perintah terjadwal dengan perintah at pada waktu tertentu\n" "saat at dijalankan, dan memulai perintah secara batch waktu rata-rata load\n" "sedang rendah." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "Cron adalah program UNIX standar yang menjalankan program pengguna\n" "pada waktu yang terjadwal. vixie cron memiliki fitur yang lebih lengkap\n" "dari cron UNIX biasa, termasuk pembenahan sekuriti yang lebih baik dan\n" "lebih mantapnya option pada konfigurasinya." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM memberikan akses ke mouse pada aplikasi Linux yang text based semacam\n" "Midnight Commander. Dia juga bisa bikin cut-and-paste dengan mouse pada " "konsol\n" "dan juga bikin menu pop-up di konsol." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake mendeteksi hardware, dan mengkonfigurasi yg baru/berubah bila " "perlu." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache adalah server World Wide Web. Dia dipakai untuk menyediakan file\n" "HTML dan CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "daemon superserver internet (biasa dipanggil inetd) bertugas untuk\n" "menjalankan servis-servis internet yang dibutuhkan. Dia bertanggung jawab\n" "atas banyak server, misalnya telnet, ftp, rsh, dan rlogin. Menonaktifkan\n" "inetd berarti menonaktifkan semua servis-servis tadi." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Luncurkan filter paket Linux kernel seri 2.2, untuk set-up\n" "firewall yang melindungi komputer Anda dari serangan network." #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Paket ini akan memuat map papanketik yang dipilih di file\n" "/etc/sysconfig/keyboard. Mapnya dapat dipilih dari utility kbdconfig.\n" "Biarkan aktif!" #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Regenerasi otomatis header kernel di /boot untuk\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Deteksi dan konfigurasi otomatis hardware saat boot." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf kadang bekerja keras saat boot untuk perawatan konfigurasi sistem." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd adalah daemon printer yang jadi tulang punggung lpr. Dia\n" "bertugas sebagai server yang memberi perintah kepada printer untuk mencetak." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, digunakan untuk membangun server dg performans dan\n" "kapasitas tinggi." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) adalah Domain Name Server (DNS) yang digunakan untuk " "menerjemahkan nama host ke IP address." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Mount dan unmount semua Network File System (NFS), SMB (Lan\n" "Manager/windows), dan NCP (Netware)." #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Aktif/nonaktifkan semua interface network yang terkonfigurasi nyala\n" "pada saat boot." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS adalah protokol populer untuk file sharing lewat network TCP/IP.\n" "Servis ini dinyalakan untuk membuat NFS server bisa jalan dengan " "menggunakan\n" "konfigurasi pada file /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS adalah protokol populer untuk file sharing di TCP/IP\n" "Servis ini memberikan fungsi file lock pada NFS." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "Secara otomatis nyalakan numlock saat boot pada console/Xorg." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Support OKI 4w and winprinter kompatibel." #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA digunakan untuk menjalankan perangkat semacam ethernet atau modem\n" "pada laptop. Dia tak bisa jalan kecuali dikonfigurasikan di sini, jadi tak\n" "apa-apa kalau tak diinstal di komputer yang tak perlu PCMCIA." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper mengelola koneksi RPC, yang digunakan oleh protokol seperti\n" "NFS dan NIS. Server portmap harus jalan di komputer yang bertindak sebagai\n" "server untuk protokol yang menggunakan mekanisme RPC." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix adalah Mail Transport Agent, program pengantar surat dari satu ke " "lain komputer." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Menyimpan dan mengembalikan pool entropi sistem untuk membuat\n" "angka acak dengan kualitas sangat acak." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Tunjuk raw device ke block devices (misalnya partisi hard drive),\n" "untuk digunakan oleh aplikasi semacam Oracle atau player DVD" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Daemon routed digunakan untuk update tabel routing IP otomatis liwat\n" "protokol RIP. RIP dipakai di jaringan kecil, dan semakin besar jaringannya\n" "maka protokol routing yang canggih pun semakin dibutuhkan." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Protokol rstat digunakan pada jaringan untuk mengambil\n" "ukuran kinerja sistem di network." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Protokol ruser digunakan di jaringan untuk mengidentifikasi siapa\n" "yang lagi login di jaringan." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "Protokol rwho digunakan untuk melihat daftar pengguna yang sedang login\n" "di suatu sistem yang juga menjalankan daemon rwho (mirip dengan finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Aktifkan sistem suara" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog adalah fasilitas yang digunakan para daemon untuk mencatat\n" "pesan log sistem di file. Sebaiknya syslog selalu hidup." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Muat driver divais USB" #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for Xorg to run)." msgstr "Aktifkan Server Font X (agar Xorg dapat berjalan)" #: services.pm:115 services.pm:157 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Pilih service mana yang hendak dijalankan saat boot scr otomatis" #: services.pm:127 #, c-format msgid "Printing" msgstr "Pencetakan" #: services.pm:128 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:131 #, c-format msgid "File sharing" msgstr "Pemakaian file bersama" #: services.pm:138 #, c-format msgid "Remote Administration" msgstr "Administrasi remote" #: services.pm:146 #, c-format msgid "Database Server" msgstr "Server Database" #: services.pm:209 #, c-format msgid "running" msgstr "sedang jalan" #: services.pm:209 #, c-format msgid "stopped" msgstr "dihentikan" #: services.pm:213 #, c-format msgid "Services and daemons" msgstr "Services dan daemon" #: services.pm:219 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Mohon maaf, informasi lengkap\n" "tentang layanan ini tidak tersedia." #: services.pm:224 ugtk2.pm:1010 #, c-format msgid "Info" msgstr "Info" #: services.pm:227 #, c-format msgid "Start when requested" msgstr "Mulai bila diminta" #: services.pm:227 #, c-format msgid "On boot" msgstr "Saat boot" #: services.pm:244 #, c-format msgid "Start" msgstr "Mulai" #: services.pm:244 #, c-format msgid "Stop" msgstr "Stop" #: share/advertising/01.pl:13 #, c-format msgid "What is Mandrakelinux?" msgstr "Apa itu Mandrakleinux?" #: share/advertising/01.pl:15 #, c-format msgid "Welcome to Mandrakelinux!" msgstr "Selamat Datang di Mandrakelinux!" #: share/advertising/01.pl:17 #, c-format msgid "" "Mandrakelinux is a Linux distribution that comprises the core of the " "system, called the operating system (based on the Linux kernel) " "together with a lot of applications meeting every need you could even " "think of." msgstr "" "Mandrakelinux adalah sebuah distribusi Linux yang menggabungkan inti " "sistem, yang disebut sistem operasi (berbasiskan kernel Linux) " "dengan banyak aplikasi yang sesuai kebutuhan Anda." #: share/advertising/01.pl:19 #, c-format msgid "" "Mandrakelinux is the most user-friendly Linux distribution today. It " "is also one of the most widely used Linux distributions worldwide!" msgstr "" "Mandrakelinux juga merupakan distribusi Linux paling ramah pengguna. " "Ia juga merupakan distribusi Linux paling banyak digunakan!" #: share/advertising/02.pl:13 #, c-format msgid "Open Source" msgstr "Open Source" #: share/advertising/02.pl:15 #, c-format msgid "Welcome to the world of open source!" msgstr "Selamat datang di dunia open source!" #: share/advertising/02.pl:17 #, c-format msgid "" "Mandrakelinux is committed to the open source model. This means that this " "new release is the result of collaboration between Mandrakesoft's " "team of developers and the worldwide community of Mandrakelinux " "contributors." msgstr "" "Mandrakelinux komitmen dengan model open source. Hal ini berarti rilis baru " "adalah hasil kolaborasi antara tim pengembang Mandrakesoft " "dengan komunitas kontributor Mandrakelinux." #: share/advertising/02.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development " "of this latest release." msgstr "" "Kami ingin mengucapkan terima kasih pada semua orang yang " "berpartisipasi dalam pengembangan rilis terakhir ini." #: share/advertising/03.pl:13 #, c-format msgid "The GPL" msgstr "GPL" #: share/advertising/03.pl:15 #, c-format msgid "" "Most of the software included in the distribution and all of the " "Mandrakelinux tools are licensed under the General Public License." msgstr "" "Sebagian besar perangkat lunak yang disertakan pada distribusi ini " "dan semua perkakas Mandrakelinux berada dibawah lisensi General " "Public License." #: share/advertising/03.pl:17 #, c-format msgid "" "The GPL is at the heart of the open source model; it grants everyone the " "freedom to use, study, distribute and improve the software any way " "they want, provided they make the results available." msgstr "" "GPL adalah inti model open source; Ia memberikan kebebasan bagi " "semua orang untuk menggunakan, mempelajari, mendistribusikan, dan " "meningkatkan perangkat lunak dengan segala cara." #: share/advertising/03.pl:19 #, c-format msgid "" "The main benefit of this is that the number of developers is virtually " "unlimited, resulting in very high quality software." msgstr "" "Keuntungan utama adalah jumlah pengembang secara virtual tidak terbatas" ", sehingga menghasilkan perangkat lunak berkualitas tinggi." #: share/advertising/04.pl:13 #, c-format msgid "Join the Community" msgstr "Bergabung dengan Komunitas" #: share/advertising/04.pl:15 #, c-format msgid "" "Mandrakelinux has one of the biggest communities of users and " "developers. The role of such a community is very wide, ranging from bug " "reporting to the development of new applications. The community plays a " "key role in the Mandrakelinux world." msgstr "" "Mandrakelinux memilih salah satu komunitas terbesar dari pengguna " "dan pengembang. Fungsi dari komunitas sangatlah luas, mulai dari pelaporan " "cacat hingga pengembangan aplikasi baru. Komunitas memainkan peran " "dalam dunia Mandrakelinux." #: share/advertising/04.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www." "mandrakelinux.com or directly www.mandrakelinux.com/en/cookerdevel." "php3 if you would like to get involved in the development." msgstr "" "Untuk mempelajari lebih lanjut tentang komunitas dinamis kami, " "silahkan kunjungi www.mandrakelinux.com atau www.mandrakelinux" ".com/en/cookerdevel.php3 jika Anda ingin terlibat pada " "pengembangan." #: share/advertising/05.pl:13 #, c-format msgid "Download Version" msgstr "Versi Download" #: share/advertising/05.pl:15 #, c-format msgid "" "You are now installing Mandrakelinux Download. This is the free " "version that Mandrakesoft wants to keep available to everyone." msgstr "" "Saat ini Anda akan menginstall Mandrakelinux Versi Download. " "Ini merupakan versi gratis yang tersedia untuk semua." #: share/advertising/05.pl:17 #, c-format msgid "" "The Download version cannot include all the software that is not open " "source. Therefore, you will not find in the Download version:" msgstr "" "Versi Download tidak menyertakan semua perangkat keras yang bukan " "open source. Sehingga Anda tidak akan menemukan pada versi Download:" #: share/advertising/05.pl:18 #, c-format msgid "" "\t* Proprietary drivers (such as drivers for NVIDIA®, ATI™, etc.)." msgstr "" "\t* Driver Proprietary (seperti driver untuk NVIDIA®, ATI™, dll.)." #: share/advertising/05.pl:19 #, c-format msgid "" "\t* Proprietary software (such as Acrobat® Reader®, RealPlayer®, " "Flash™, etc.)." msgstr "" "\t* Perangkat lunak proprietary (seperti Acrobat® Reader®, RealPlayer®, " "Flash™, dll.)." #: share/advertising/05.pl:21 #, c-format msgid "" "You will not have access to the services included in the other " "Mandrakesoft products either." msgstr "" "Anda tidak akan mendapatkan akses ke layanan yang disertakan " "pada produk Mandrakesoft lainnya." #: share/advertising/06.pl:13 #, c-format msgid "Discovery, Your First Linux Desktop" msgstr "Discovery, Desktop Linux Pertama Anda" #: share/advertising/06.pl:15 #, c-format msgid "You are now installing Mandrakelinux Discovery." msgstr "Anda sekarang akan menginstall Mandrakelinux Discovery." #: share/advertising/06.pl:17 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux " "distribution. It includes a hand-picked selection of premium software " "for office, multimedia and Internet activities. Its menu is task-oriented, " "with a single application per task." msgstr "" "Discovery adalah distribusi Linux termudah dan paling ramah " "pengguna. Ia menyertakan pilihan perangkat lunak premium" "untuk perkantoran, aktivitas multimedia dan Internet. Menunya sangat " "berorientasi pada kerja dengan aplikasi tunggal setiap tugas." #: share/advertising/07.pl:13 #, c-format msgid "PowerPack, The Ultimate Linux Desktop" msgstr "PowerPack, Desktop Linux Handal" #: share/advertising/07.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack." msgstr "Anda akan menginstall Mandrakelinux PowerPack." #: share/advertising/07.pl:17 #, c-format msgid "" "PowerPack is Mandrakesoft's premier Linux desktop product. PowerPack " "includes thousands of applications - everything from the most popular " "to the most advanced." msgstr "" "PowerPack adalah produk desktop Linux khusus Mandrakesoft. " "PowerPack menyertakan ribuan aplikasi - semua dari yang paling " "populer hingga yang paling canggih." #: share/advertising/08.pl:13 #, c-format msgid "PowerPack+, The Linux Solution for Desktops and Servers" msgstr "PowerPack+, Solusi Linux untuk Desktop dan Server" #: share/advertising/08.pl:15 #, c-format msgid "You are now installing Mandrakelinux PowerPack+." msgstr "Anda akan menginstall Mandrakelinux PowerPack+." #: share/advertising/08.pl:17 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-" "sized networks. PowerPack+ includes thousands of desktop " "applications and a comprehensive selection of world-class server " "applications." msgstr "" "PowerPack+ adalah Solusi Linux Penuh Fitur untuk jaringan " "kecil hingga menengah. PowerPack+ menyertakan ribuan aplikasi desktop " " dan pilihan komprehensif untuk aplikasi server." #: share/advertising/09.pl:13 #, c-format msgid "Mandrakesoft Products" msgstr "Produk Mandrakesoft" #: share/advertising/09.pl:15 #, c-format msgid "" "Mandrakesoft has developed a wide range of Mandrakelinux " "products." msgstr "" "Mandrakesoft telah mengembangkan produk Mandrakelinux yang " "luas." #: share/advertising/09.pl:17 #, c-format msgid "The Mandrakelinux 10.1 products are:" msgstr "Produk Mandrakelinux 10.1 adalah:" #: share/advertising/09.pl:18 #, c-format msgid "\t* Discovery, Your First Linux Desktop." msgstr "\t* Discovery, Desktop Linux Pertama Anda." #: share/advertising/09.pl:19 #, c-format msgid "\t* PowerPack, The Ultimate Linux Desktop." msgstr "\t* PowerPack, Desktop Linux Handal." #: share/advertising/09.pl:20 #, c-format msgid "\t* PowerPack+, The Linux Solution for Desktops and Servers." msgstr "\t* PowerPack+, Solusi Linux untuk Desktop dan Server." #: share/advertising/09.pl:21 #, c-format msgid "" "\t* Mandrakelinux 10.1 for x86-64, The Mandrakelinux solution for " "making the most of your 64-bit processor." msgstr "" "\t* Mandrakelinux 10.1 untuk x86-64, Solusi Mandrakelinux untuk " "memaksimalkan prosessor 64-bit Anda." #: share/advertising/10.pl:13 #, c-format msgid "Mandrakesoft Products (Nomad Products)" msgstr "Produk Mandrakesoft (Produk Nomad)" #: share/advertising/10.pl:15 #, c-format msgid "" "Mandrakesoft has developed two products that allow you to use Mandrakelinux " "on any computer and without any need to actually install it:" msgstr "" "Mandrakesoft telah mengembangan dua produk yang mengijinkan Anda " "menggunakan Mandrakelinux pada sembarang komputer dan tanpa " "harus menginstallnya:" #: share/advertising/10.pl:16 #, c-format msgid "" "\t* Move, a Mandrakelinux distribution that runs entirely from a " "bootable CD-ROM." msgstr "" "\t* Move, distribusi Mandrakelinux yang berjalan sepenuhnya melalui " "CD-ROM bootable." #: share/advertising/10.pl:17 #, c-format msgid "" "\t* GlobeTrotter, a Mandrakelinux distribution pre-installed on the " "ultra-compact “LaCie Mobile Hard Drive”." msgstr "" "\t* GlobeTrotter, distribusi Mandrakelinux yang terinstall pada " "ultra-compact “LaCie Mobile Hard Drive”." #: share/advertising/11.pl:13 #, c-format msgid "Mandrakesoft Products (Professional Solutions)" msgstr "Produk Mandrakesoft (Solusi Professional)" #: share/advertising/11.pl:15 #, c-format msgid "" "Below are the Mandrakesoft products designed to meet the professional " "needs:" msgstr "" "Dibawah ini adalah produk Mandrakesoft yang didesain untuk memenuhi " "kebutuhan professional:" #: share/advertising/11.pl:16 #, c-format msgid "\t* Corporate Desktop, The Mandrakelinux Desktop for Businesses." msgstr "\t* Corporate Desktop, Desktop Mandrakelinux untuk Bisnis." #: share/advertising/11.pl:17 #, c-format msgid "\t* Corporate Server, The Mandrakelinux Server Solution." msgstr "\t* Corporate Server, Solusi Server Mandrakelinux." #: share/advertising/11.pl:18 #, c-format msgid "\t* Multi-Network Firewall, The Mandrakelinux Security Solution." msgstr "\t* Multi-Network Firewall, Solusi Keamanan Mandrakelinux." #: share/advertising/12.pl:13 #, c-format msgid "The KDE Choice" msgstr "Pilihan KDE" #: share/advertising/12.pl:15 #, c-format msgid "" "With your Discovery, you will be introduced to KDE, the most advanced " "and user-friendly graphical desktop environment available." msgstr "" "Dengan Discovery, Anda akan diperkenalkan pada KDE, lingkungan " "grafis paling canggih dan ramah pengguna yang ada." #: share/advertising/12.pl:17 #, c-format msgid "" "KDE will make your first steps with Linux so easy that you " "will not ever think of running another operating system!" msgstr "" "KDE akan membuat langkah pertama Anda dengan Linux menjadi " "mudah sehingga Anda tidak akan berpikir untuk menjalankan sistem " "operasi lain!" #: share/advertising/12.pl:19 #, c-format msgid "" "KDE also includes a lot of well integrated applications such as " "Konqueror, the web browser and Kontact, the personal information manager." msgstr "" "KDE juga menyertakan banyak aplikasi yang terintegrasi seperti " "Konqueror, web browser dan Kontact, manajer informasi pribadi." #: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13 #, c-format msgid "Choose your Favorite Desktop Environment" msgstr "Pilih Lingkungan Desktop Favorit Anda" #: share/advertising/13-a.pl:15 #, c-format msgid "" "With PowerPack, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" "Dengan PowerPack, Anda akan memiliki pilihan untuk lingkungan desktop " "grafis. Mandrakesoft telah memilih KDE sebagai default." #: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17 #, c-format msgid "" "KDE is one of the most advanced and user-friendly graphical " "desktop environment available. It includes a lot of integrated applications." msgstr "" "KDE adalah salah satu lingkungan desktop grafis paling canggih dan " "ramah pengguna. Ia menyertakan banyak aplikasi terintegrasi." #: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19 #, c-format msgid "" "But we advise you to try all available ones (including GNOME, " "IceWM, etc.) and pick your favorite." msgstr "" "Tetapi kami menyarankan untuk mencoba semua (termasuk GNOME, " "IceWM, dll.) dan memilih favorit Anda." #: share/advertising/13-b.pl:15 #, c-format msgid "" "With PowerPack+, you will have the choice of the graphical desktop " "environment. Mandrakesoft has chosen KDE as the default one." msgstr "" "Dengan PowerPack+, Anda akan memiliki pilihan untuk lingkungan desktop " "grafis. Mandrakesoft telah memilih KDE sebagai default." #: share/advertising/14.pl:13 #, c-format msgid "OpenOffice.org" msgstr "OpenOffice.org" #: share/advertising/14.pl:15 #, c-format msgid "With Discovery, you will discover OpenOffice.org." msgstr "Dengan Discovery, Anda akan menjelajahi OpenOffice.org." #: share/advertising/14.pl:17 #, c-format msgid "" "It is a full-featured office suite that includes word processor, " "spreadsheet, presentation and drawing applications." msgstr "" "Merupakan aplikasi office penuh fitur yang menyertakan aplikasi " "pengolah kata, spreadsheet, presentasi, dan penggambar." #: share/advertising/14.pl:19 #, c-format msgid "" "OpenOffice.org can read and write most types of Microsoft® Office " "documents such as Word, Excel and PowerPoint® files." msgstr "" "OpenOffice.org mampu membaca dan menulis sebagian besar dokumen " "Microsoft® Office seperti file Word, Excel, dan PowerPoint®." #: share/advertising/15.pl:13 #, c-format msgid "Kontact" msgstr "Kontact" #: share/advertising/15.pl:15 #, c-format msgid "" "Discovery includes Kontact, the new KDE groupware solution." msgstr "" "Discovery menyertakan Kontact, Solusi groupware baru KDE." #: share/advertising/15.pl:17 #, c-format msgid "" "More than just a full-featured e-mail client, Kontact also includes " "an address book, a calendar, plus a tool for taking notes!" msgstr "" "Lebih dari klien email penuh fitur, Kontact juga menyertakan sebuah " "buku alamat, kalender, ditambah perkakas untuk mencatat " "notes!" #: share/advertising/15.pl:19 #, c-format msgid "" "It is the easiest way to communicate with your contacts and to organize your " "time." msgstr "" "Merupakan cara termudah untuk berkomunikasi dengan relasi dan mengatur waktu " "Anda." #: share/advertising/16.pl:13 #, c-format msgid "Surf the Internet" msgstr "Jelajahi Internet" #: share/advertising/16.pl:15 #, c-format msgid "Discovery will give you access to every Internet resource:" msgstr "Discovery akan memberi akses pada semua sumber daya Internet:" #: share/advertising/16.pl:16 #, c-format msgid "\t* Browse the Web with Konqueror." msgstr "\t* Menjelajahi Web dengan Konqueror." #: share/advertising/16.pl:17 #, c-format msgid "\t* Chat online with your friends using Kopete." msgstr "\t* Chat online dengan teman dengan Kopete." #: share/advertising/16.pl:18 #, c-format msgid "\t* Transfer files with KBear." msgstr "\t* Transfer file dengan KBear." #: share/advertising/16.pl:19 share/advertising/17.pl:19 #: share/advertising/18.pl:22 #, c-format msgid "\t* ..." msgstr "\t* ..." #: share/advertising/17.pl:13 #, c-format msgid "Enjoy our Multimedia Features" msgstr "Nikmati Fitur Multimedia kami" #: share/advertising/17.pl:15 #, c-format msgid "Discovery will also make multimedia very easy for you:" msgstr "Discovery juga membuat multimedia bagi Anda:" #: share/advertising/17.pl:16 #, c-format msgid "\t* Watch your favorite videos with Kaffeine." msgstr "\t* Melihat video favorit dengan Kaffeine." #: share/advertising/17.pl:17 #, c-format msgid "\t* Listen to your music files with amaroK." msgstr "\t* Mendengarkan file musik Anda dengan amaroK." #: share/advertising/17.pl:18 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* Mengedit dan membuat citra dengan GIMP." #: share/advertising/18.pl:13 #, c-format msgid "Enjoy the Wide Range of Applications" msgstr "Menikmati Aplikasi yang Luas" #: share/advertising/18.pl:15 #, c-format msgid "" "In the Mandrakelinux menu you will find easy-to-use applications for " "all of your tasks:" msgstr "" "Pada menu Mandrakelinux Anda akan menemukan aplikasi mudah digunakan" " untuk semua tugas Anda:" #: share/advertising/18.pl:16 #, c-format msgid "\t* Create, edit and share office documents with OpenOffice.org." msgstr "\t* Membuat, mengedit dan berbagi dokumen kantor dengan OpenOffice.org." #: share/advertising/18.pl:17 #, c-format msgid "" "\t* Manage your personal data with the integrated personal information " "suites Kontact and Evolution." msgstr "" "\t* Mengelola data pribadi dengan aplikasi Kontact dan Evolution" " yang terintegrasi." #: share/advertising/18.pl:18 #, c-format msgid "\t* Browse the web with Mozilla and Konqueror." msgstr "\t* Menjelajahi web dengan Mozilla dan Konqueror." #: share/advertising/18.pl:19 #, c-format msgid "\t* Participate in online chat with Kopete." msgstr "\t* Berpartisipasi pada chat online dengan Kopete." #: share/advertising/18.pl:20 #, c-format msgid "" "\t* Listen to your audio CDs and music files, watch your " "videos." msgstr "" "\t* mendengarkan CD audio dan file musik, melihat video " " Anda." #: share/advertising/18.pl:21 #, c-format msgid "\t* Edit and create images with the GIMP." msgstr "\t* Mengedit dan membuat citra dengan GIMP." #: share/advertising/19.pl:13 #, c-format msgid "Development Environments" msgstr "Lingkungan pengembangan" #: share/advertising/19.pl:15 share/advertising/22.pl:15 #, c-format msgid "" "PowerPack gives you the best tools to develop your own applications." msgstr "" "PowerPack memberi Anda perkakas terbaik untuk mengembangan " "aplikasi." #: share/advertising/19.pl:17 #, c-format msgid "" "You will enjoy the powerful, integrated development environment from KDE, " "KDevelop, which will let you program in a lot of languages." msgstr "" "Anda akan menikmati lingkungan pengembangan terintegrasi dari KDE, " "KDevelop, yang mengijinkan Anda memprogram pada banyak bahasa." #: share/advertising/19.pl:19 #, c-format msgid "" "PowerPack also ships with GCC, the leading Linux compiler and GDB, the associated debugger." msgstr "" "PowerPack juga hadir dengan GCC, kompiler Linux dan GDB, " "debugger yang berhubungan." #: share/advertising/20.pl:13 #, c-format msgid "Development Editors" msgstr "Editor Pengembangan" #: share/advertising/20.pl:15 #, c-format msgid "PowerPack will let you choose between those popular editors:" msgstr "PowerPack akan mengijinkan Anda memilih diantara editor populer:" #: share/advertising/20.pl:16 #, c-format msgid "\t* Emacs: a customizable and real time display editor." msgstr "\t* Emacs: editor tampilan nyata dan dapat dikustomisasi." #: share/advertising/20.pl:17 #, c-format msgid "" "\t* XEmacs: another open source text editor and application " "development system." msgstr "" "\t* XEmacs: editor teks open source yang lain dan sistem " "aplikasi pengembangan." #: share/advertising/20.pl:18 #, c-format msgid "" "\t* Vim: an advanced text editor with more features than standard Vi." msgstr "" "\t* Vim: editor teks canggih dengan lebih banyak fitur dibanding Vi." #: share/advertising/21.pl:13 #, c-format msgid "Development Languages" msgstr "Bahasa Pengembangan" #: share/advertising/21.pl:15 #, c-format msgid "" "With all these powerful tools, you will be able to write applications " "in dozens of programming languages:" msgstr "" "Dengan semua perkakas handal, Anda akan mampu menulis aplikasi " "pada banyak bahasa pemrograman:" #: share/advertising/21.pl:16 #, c-format msgid "\t* The famous C language." msgstr "\t* Bahasa C yang terkenal." #: share/advertising/21.pl:17 #, c-format msgid "\t* Object oriented languages:" msgstr "\t* Bahasa berorientasi objek:" #: share/advertising/21.pl:18 #, c-format msgid "\t\t* C++" msgstr "\t\t* C++" #: share/advertising/21.pl:19 #, c-format msgid "\t\t* Java™" msgstr "\t\t* Java™" #: share/advertising/21.pl:20 #, c-format msgid "\t* Scripting languages:" msgstr "\t* Bahasa scripting:" #: share/advertising/21.pl:21 #, c-format msgid "\t\t* Perl" msgstr "\t\t* Perl" #: share/advertising/21.pl:22 #, c-format msgid "\t\t* Python" msgstr "\t\t* Python" #: share/advertising/21.pl:23 share/advertising/28.pl:22 #, c-format msgid "\t* And many more." msgstr "\t* Dan banyak lagi." #: share/advertising/22.pl:13 #, c-format msgid "Development Tools" msgstr "Perkakas Pengembangan" #: share/advertising/22.pl:17 #, c-format msgid "" "With the powerful integrated development environment KDevelop and the " "leading Linux compiler GCC, you will be able to create applications " "in many different languages (C, C++, Java™, Perl, Python, etc.)." msgstr "" "Dengan lingkungan pengembangan terintegrasi KDevelop dan kompiler " "Linux GCC, Anda akan mampu membuat aplikasi pada bahasa yang" "berbeda (C, C++, Java™, Perl, Python, dll.)." #: share/advertising/23.pl:13 #, c-format msgid "Groupware Server" msgstr "Server Groupware" #: share/advertising/23.pl:15 #, c-format msgid "" "PowerPack+ will give you access to Kolab, a full-featured " "groupware server which will, thanks to the client Kontact, " "allow you to:" msgstr "" "PowerPack+ akan memberi Anda akses pada Kolab, sebuah server " "groupware yang penuh fitur dan dengan bantuan Kontact yang " "akan mengijinkan Anda untuk:" #: share/advertising/23.pl:16 #, c-format msgid "\t* Send and receive your e-mails." msgstr "\t* Mengirim dan menerima e-mail." #: share/advertising/23.pl:17 #, c-format msgid "\t* Share your agendas and your address books." msgstr "\t* Men-share agenda dan buku alamat Anda." #: share/advertising/23.pl:18 #, c-format msgid "\t* Manage your memos and task lists." msgstr "\t* Mengelola memo dan daftar tugas Anda." #: share/advertising/24.pl:13 #, c-format msgid "Servers" msgstr "Server" #: share/advertising/24.pl:15 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" "Meningkatkan jaringan bisnis dengan solusi server premier meliputi:" #: share/advertising/24.pl:16 #, c-format msgid "" "\t* Samba: File and print services for Microsoft® Windows® clients." msgstr "" "\t* Samba: Layanan file dan centak untuk klien MicrosoftAr WindowsAr." #: share/advertising/24.pl:17 #, c-format msgid "\t* Apache: The most widely used web server." msgstr "\t* Apache: Server web yang paling banyak digunakan." #: share/advertising/24.pl:18 #, c-format msgid "" "\t* MySQL and PostgreSQL: The world's most popular open source " "databases." msgstr "" "\t* MySQL dan PostgresSQL: Database open souce yang paling " "populer." #: share/advertising/24.pl:19 #, c-format msgid "" "\t* CVS: Concurrent Versions System, the dominant open source network-" "transparent version control system." msgstr "" "\t* CVS: Concurrent Versions System, sistem pengontrol versi open " "source yang dominan." #: share/advertising/24.pl:20 #, c-format msgid "" "\t* ProFTPD: The highly configurable GPL-licensed FTP server software." msgstr "" "\t* ProFTPD: Perangkat lunak server FTP berlisensi GPL." #: share/advertising/24.pl:21 #, c-format msgid "" "\t* Postfix and Sendmail: The popular and powerful mail " "servers." msgstr "" "\t* Postfix dan Sendmail: server mail paling populer." #: share/advertising/25.pl:13 #, c-format msgid "Mandrakelinux Control Center" msgstr "Pusat Kontrol Mandrakelinux" #: share/advertising/25.pl:15 #, c-format msgid "" "The Mandrakelinux Control Center is an essential collection of " "Mandrakelinux-specific utilities designed to simplify the configuration of " "your computer." msgstr "" #: share/advertising/25.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of more than 60 handy " "utilities for easily configuring your system: hardware devices, mount " "points, network and Internet, security level of your computer, etc." msgstr "" #: share/advertising/26.pl:13 #, c-format msgid "The Open Source Model" msgstr "" #: share/advertising/26.pl:15 #, c-format msgid "" "Like all computer programming, open source software requires time and " "people for development. In order to respect the open source philosophy, " "Mandrakesoft sells added value products and services to keep improving " "Mandrakelinux. If you want to support the open source philosophy " "and the development of Mandrakelinux, please consider buying one of " "our products or services!" msgstr "" #: share/advertising/27.pl:13 #, fuzzy, c-format msgid "Online Store" msgstr "Pusat Kontrol Mandrakelinux" #: share/advertising/27.pl:15 #, c-format msgid "" "To learn more about Mandrakesoft products and services, you can visit our " "e-commerce platform." msgstr "" #: share/advertising/27.pl:17 #, c-format msgid "There you can find all our products, services and third-party products." msgstr "" #: share/advertising/27.pl:19 #, c-format msgid "" "This platform has just been redesigned to improve its efficiency and " "usability." msgstr "" #: share/advertising/27.pl:21 #, c-format msgid "Stop by today at store.mandrakesoft.com!" msgstr "" #: share/advertising/28.pl:13 #, fuzzy, c-format msgid "Mandrakeclub" msgstr "Mandrakeonline" #: share/advertising/28.pl:15 #, c-format msgid "" "Mandrakeclub is the perfect companion to your Mandrakelinux " "product.." msgstr "" #: share/advertising/28.pl:17 #, c-format msgid "" "Take advantage of valuable benefits by joining Mandrakeclub, such as:" msgstr "" #: share/advertising/28.pl:18 #, c-format msgid "" "\t* Special discounts on products and services of our online store " "store.mandrakesoft.com." msgstr "" #: share/advertising/28.pl:19 #, c-format msgid "" "\t* Access to commercial applications (for example to NVIDIA® or ATI™ " "drivers)." msgstr "" #: share/advertising/28.pl:20 #, c-format msgid "\t* Participation in Mandrakelinux user forums." msgstr "" #: share/advertising/28.pl:21 #, c-format msgid "" "\t* Early and privileged access, before public release, to " "Mandrakelinux ISO images." msgstr "" #: share/advertising/29.pl:13 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline" #: share/advertising/29.pl:15 #, c-format msgid "" "Mandrakeonline is a new premium service that Mandrakesoft is proud to " "offer its customers!" msgstr "" #: share/advertising/29.pl:17 #, c-format msgid "" "Mandrakeonline provides a wide range of valuable services for easily " "updating your Mandrakelinux systems:" msgstr "" #: share/advertising/29.pl:18 #, c-format msgid "\t* Perfect system security (automated software updates)." msgstr "" #: share/advertising/29.pl:19 #, c-format msgid "" "\t* Notification of updates (by e-mail or by an applet on the " "desktop)." msgstr "" #: share/advertising/29.pl:20 #, c-format msgid "\t* Flexible scheduled updates." msgstr "" #: share/advertising/29.pl:21 #, c-format msgid "" "\t* Management of all your Mandrakelinux systems with one account." msgstr "" #: share/advertising/30.pl:13 #, fuzzy, c-format msgid "Mandrakeexpert" msgstr "Pusat Kontrol Mandrakelinux" #: share/advertising/30.pl:15 #, c-format msgid "" "Do you require assistance? Meet Mandrakesoft's technical experts on " "our technical support platform www.mandrakeexpert.com." msgstr "" #: share/advertising/30.pl:17 #, c-format msgid "" "Thanks to the help of qualified Mandrakelinux experts, you will save " "a lot of time." msgstr "" #: share/advertising/30.pl:19 #, c-format msgid "" "For any question related to Mandrakelinux, you have the possibility to " "purchase support incidents at store.mandrakesoft.com." msgstr "" #: share/compssUsers.pl:25 #, c-format msgid "Office Workstation" msgstr "Komputer Kantor" #: share/compssUsers.pl:27 #, c-format msgid "" "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets " "(OpenOffice.org Calc, Kspread), PDF viewers, etc" msgstr "" "Program office: pengolah kata (OpenOffice.org Writer, Kword), spreadsheet " "(OpenOffice.org Calc, Kspread), viewer pdf,dsb" #: share/compssUsers.pl:28 #, c-format msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Program office: pengolah kata (kword, abiword), spreadsheet (kspread, " "gnumeric), viewer pdf,dsb" #: share/compssUsers.pl:33 #, c-format msgid "Game station" msgstr "Komputer Game" #: share/compssUsers.pl:34 #, c-format msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Program permainan: arcade, board, strategi, dsb" #: share/compssUsers.pl:37 #, c-format msgid "Multimedia station" msgstr "Komputer Multimedia" #: share/compssUsers.pl:38 #, c-format msgid "Sound and video playing/editing programs" msgstr "Program untuk memainkan/mengedit suara dan video" #: share/compssUsers.pl:43 #, c-format msgid "Internet station" msgstr "Komputer Internet" #: share/compssUsers.pl:44 #, fuzzy, c-format msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Kumpulan tool untuk membaca dan mengirimkan email dan news (pine, mutt, " "tin..) dan untuk membrowse Web" #: share/compssUsers.pl:49 #, c-format msgid "Network Computer (client)" msgstr "Komputer Jaringan (klien)" #: share/compssUsers.pl:50 #, c-format msgid "Clients for different protocols including ssh" msgstr "Klien untuk berbagai protokol, termasuk ssh" #: share/compssUsers.pl:54 #, c-format msgid "Configuration" msgstr "Konfigurasi" #: share/compssUsers.pl:55 #, c-format msgid "Tools to ease the configuration of your computer" msgstr "Alat untuk memudahkan konfigurasi komputer." #: share/compssUsers.pl:59 #, c-format msgid "Console Tools" msgstr "Alat konsol" #: share/compssUsers.pl:60 #, c-format msgid "Editors, shells, file tools, terminals" msgstr "Editor, shell, tool untuk file, terminal" #: share/compssUsers.pl:65 share/compssUsers.pl:165 #, c-format msgid "C and C++ development libraries, programs and include files" msgstr "Librari, program, dan file include untuk pemrograman C dan C++" #: share/compssUsers.pl:69 share/compssUsers.pl:169 #, c-format msgid "Documentation" msgstr "Dokumentasi" #: share/compssUsers.pl:70 share/compssUsers.pl:170 #, c-format msgid "Books and Howto's on Linux and Free Software" msgstr "Buku dan Howto untuk Linux dan Free Software" #: share/compssUsers.pl:74 share/compssUsers.pl:173 #, c-format msgid "LSB" msgstr "LSB" #: share/compssUsers.pl:75 share/compssUsers.pl:174 #, c-format msgid "Linux Standard Base. Third party applications support" msgstr "Basis Standar Linux. Tunjangan aplikasi partai ketiga" #: share/compssUsers.pl:85 #, c-format msgid "Apache" msgstr "Apache" #: share/compssUsers.pl:88 #, c-format msgid "Groupware" msgstr "Groupware" #: share/compssUsers.pl:89 #, c-format msgid "Kolab Server" msgstr "Server Kolab" #: share/compssUsers.pl:92 share/compssUsers.pl:133 #, c-format msgid "Firewall/Router" msgstr "Server, Firewall/Router" #: share/compssUsers.pl:93 share/compssUsers.pl:134 #, c-format msgid "Internet gateway" msgstr "Gerbang Internet" #: share/compssUsers.pl:96 #, fuzzy, c-format msgid "Mail/News" msgstr "/File/B_aru" #: share/compssUsers.pl:97 #, fuzzy, c-format msgid "Postfix mail server, Inn news server" msgstr "Server mail Postfix" #: share/compssUsers.pl:100 #, fuzzy, c-format msgid "Directory Server" msgstr "Restorasi Dari CD" #: share/compssUsers.pl:104 #, c-format msgid "FTP Server" msgstr "Server FTP" #: share/compssUsers.pl:105 #, c-format msgid "ProFTPd" msgstr "" #: share/compssUsers.pl:108 #, c-format msgid "DNS/NIS" msgstr "DNS/NIS" #: share/compssUsers.pl:109 #, c-format msgid "Domain Name and Network Information Server" msgstr "Nama Domain dan Server Info Network (NIS)" #: share/compssUsers.pl:112 #, fuzzy, c-format msgid "File and Printer Sharing Server" msgstr "Server Printer" #: share/compssUsers.pl:113 #, fuzzy, c-format msgid "NFS Server, Samba server" msgstr "Server Samba" #: share/compssUsers.pl:116 share/compssUsers.pl:129 #, c-format msgid "Database" msgstr "Database" #: share/compssUsers.pl:117 #, fuzzy, c-format msgid "PostgreSQL and MySQL Database Server" msgstr "Server database PostgreSQL atau MySQL" #: share/compssUsers.pl:121 #, c-format msgid "Web/FTP" msgstr "Server, Web/FTP" #: share/compssUsers.pl:122 #, c-format msgid "Apache, Pro-ftpd" msgstr "Apache dan Pro-ftpd" #: share/compssUsers.pl:125 #, c-format msgid "Mail" msgstr "Mail" #: share/compssUsers.pl:126 #, c-format msgid "Postfix mail server" msgstr "Server mail Postfix" #: share/compssUsers.pl:130 #, c-format msgid "PostgreSQL or MySQL database server" msgstr "Server database PostgreSQL atau MySQL" #: share/compssUsers.pl:137 #, c-format msgid "Network Computer server" msgstr "Komputer Server Jaringan" #: share/compssUsers.pl:138 #, c-format msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "server NFS, SMB, Proxy, SSH" #: share/compssUsers.pl:146 #, c-format msgid "KDE Workstation" msgstr "Workstation KDE" #: share/compssUsers.pl:147 #, c-format msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "The K Desktop Environment, lingkungan grafis dasar dg kumpulan tool-tool " "yang menyertainya" #: share/compssUsers.pl:151 #, c-format msgid "GNOME Workstation" msgstr "Stasiunkerja Gnome" #: share/compssUsers.pl:152 #, c-format msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Environment grafis dengan kumpulan aplikasi dan tool desktop yang mudah " "digunakan" #: share/compssUsers.pl:155 #, c-format msgid "Other Graphical Desktops" msgstr "Desktop Grafis lainnya" #: share/compssUsers.pl:156 #, c-format msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "Icewm, Window Maker, Enlightenment, Fvwm, dsb" #: share/compssUsers.pl:179 #, fuzzy, c-format msgid "Utilities" msgstr "Filipina" #: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381 #, c-format msgid "SSH Server" msgstr "Server SSH" #: share/compssUsers.pl:186 #, fuzzy, c-format msgid "Webmin" msgstr "Webcam" #: share/compssUsers.pl:187 #, fuzzy, c-format msgid "Webmin Remote Configuration Server" msgstr "Konfigurasi Server Terminal Mandrake" #: share/compssUsers.pl:191 #, fuzzy, c-format msgid "Network Utilities/Monitoring" msgstr "Pemantauan Jaringan" #: share/compssUsers.pl:192 #, c-format msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..." msgstr "" #: share/compssUsers.pl:196 #, fuzzy, c-format msgid "Mandrakesoft Wizards" msgstr "Pusat Kontrol Mandrakelinux" #: share/compssUsers.pl:197 #, fuzzy, c-format msgid "Wizards to configure server" msgstr "Konfigurasi printer \"%s\" gagal!" #: standalone.pm:21 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "Program ini gratis; Anda dapat menyebar ulang dan/atau mengubahnya\n" "sesuai Lisensi Publik Umum GNU dari Free Software Foundation; baik\n" "versi 2, atau yang lebih baru.\n" "\n" "Program ini disebar agar dapat digunakan, tapi TANPA GARANSI APAPUN; bahkan\n" "tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n" "TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n" "\n" "Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n" "ini; jika tidak, tulis ke Free Software Foundation, Inc., \n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: standalone.pm:40 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Aplikasi Backup dan Restore\n" "\n" "--default : simpan direktori default.\n" "--debug : tampilkan semua pesan debug.\n" "--show-conf : daftar file atau direktori yg di-backup.\n" "--config-info : jelaskan opsi file konfigurasi (untuk pengguna non-" "X).\n" "--daemon : pakai konfigurasi daemon.\n" "--help : tampilkan pesan ini.\n" "--version : tampilkan nomor versi.\n" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, fuzzy, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrakelinux tools\n" " --incident - program should be one of mandrakelinux tools" msgstr "" "[OPSI] [NAMA_PROGRAM]\n" "\n" "OPSI:\n" " --help - cetak pesan ini.\n" " --report - program harus berupa alat mandrake\n" " --incident - program harus berupa alat mandrake" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, fuzzy, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "Impor Font dan aplikasi pemantauan\n" "--windows_import : impor dari seluruh partisi mindows yg ada.\n" "--xls_fonts : tampilkan semua font yg telah ada dari xls\n" "--strong : font akan dicek secara ketat.\n" "--install : terima file dan direktori font.\n" "--uninstall : hapus font atau direktori font.\n" "--replace : tindih semua font jika telah ada\n" "--application : 0 tanpa aplikasi.\n" " : 1 semua aplikasi yg ada di-support.\n" " : name_of_application semisal so untuk staroffice \n" " : dan gs untuk ghostscript." #: standalone.pm:84 #, fuzzy, c-format msgid "" "[OPTIONS]...\n" "Mandrakelinux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPSI]...\n" "Konfigurator Server Terminal Mandrake\n" "--enable : aktifkan MTS\n" "--disable : matikan MTS\n" "--start : jalankan MTS\n" "--stop : stop MTS\n" "--adduser : tambahkan pengguna sistem yg telah ada ke MTS (perlu nama " "pengguna)\n" "--deluser : hapus pengguna sistem yg telah ada dari MTS (perlu nama " "pengguna)\n" "--addclient : tambahkan komputer klien ke MTS (perlu alamat MAC, IP, " "nama image nbi)\n" "--delclient : hapus komputer klien dari MTS (perlu alamat MAC, IP, nama " "image nbi)" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[papanketik]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" #: standalone.pm:98 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" "[OPSI]\n" "Koneksi jaringan & Internet dan aplikasi monitoring\n" "\n" "--defaultintf antarmuka : tampilkan antarmuka ini\n" "--connect : sambung ke internet jika belum\n" "--disconnect : putus sambungan internet jika telah tersambung\n" "--force : digunakan dg (dis)connect : (putus)sambung paksa.\n" "--status : kembalikan 1 jika tersambung 0 jika tidak, lalu keluar.\n" "--quiet : jangan interaktif. Digunakan dg (dis)connect." #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPSI]...\n" " --no-confirmation tiada konfirmasi awal pada modus MandrakeUpdate\n" " --no-verify-rpm tidak ada verifikasi tandatangan paket\n" " --changelog-first tampilkan changelog sebelum filelist di window " "penjelasan\n" " --merge-all-rpmnew merger semua file .rpmnew/.rpmsave yg ditemukan" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" #: standalone.pm:133 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Pemakaian: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:61 #, fuzzy, c-format msgid "You need to reboot for changes to take effect" msgstr "Anda harus reboot agar perubahan tabel partisi dapat berlaku" #: standalone/XFdrake:92 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Silakan log out dan tekan Ctrl-Alt-BackSpace" #: standalone/XFdrake:96 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:74 #, c-format msgid "Useless without Terminal Server" msgstr "Tak berguna tanpa Server Terminal" #: standalone/drakTermServ:106 standalone/drakTermServ:112 #, c-format msgid "%s: %s requires a username...\n" msgstr "%s: %s memerlukan nama pengguna...\n" #: standalone/drakTermServ:123 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:129 #, c-format msgid "%s: %s requires hostname...\n" msgstr "%s: %s memerlukan nama host...\n" #: standalone/drakTermServ:211 standalone/drakTermServ:214 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "Konfigurasi Server Terminal Mandrake" #: standalone/drakTermServ:220 #, c-format msgid "Enable Server" msgstr "Aktifkan Server" #: standalone/drakTermServ:226 #, c-format msgid "Disable Server" msgstr "Pasifkan Server" #: standalone/drakTermServ:232 #, c-format msgid "Start Server" msgstr "Jalankan Server" #: standalone/drakTermServ:238 #, c-format msgid "Stop Server" msgstr "Stop Server" #: standalone/drakTermServ:247 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Floppy Etherboot/ISO" #: standalone/drakTermServ:251 #, c-format msgid "Net Boot Images" msgstr "Image Boot Net" #: standalone/drakTermServ:258 #, c-format msgid "Add/Del Users" msgstr "Tambah/Hapus Pengguna" #: standalone/drakTermServ:262 #, c-format msgid "Add/Del Clients" msgstr "Tambah/Hapus Klien DHCP" #: standalone/drakTermServ:270 #, c-format msgid "Images" msgstr "Citra" #: standalone/drakTermServ:271 #, c-format msgid "Clients/Users" msgstr "" #: standalone/drakTermServ:289 standalone/drakbug:47 #, c-format msgid "First Time Wizard" msgstr "Penolong Kali Pertama" #: standalone/drakTermServ:325 standalone/drakTermServ:326 #, c-format msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$" msgstr "" #: standalone/drakTermServ:332 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup DHCP.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:377 #, fuzzy, c-format msgid "Cancel Wizard" msgstr "Luncurkan penolong" #: standalone/drakTermServ:392 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:420 #, fuzzy, c-format msgid "Use thin clients." msgstr "Izinkan Klien Thin" #: standalone/drakTermServ:422 #, c-format msgid "Sync client X keyboard settings with server." msgstr "" #: standalone/drakTermServ:424 #, c-format msgid "" "Please select default client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:444 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:445 standalone/drakTermServ:747 #: standalone/drakTermServ:764 #, c-format msgid "This will take a few minutes." msgstr "Butuh beberapa menit." #: standalone/drakTermServ:449 standalone/drakTermServ:468 #, fuzzy, c-format msgid "Done!" msgstr "Selesai" #: standalone/drakTermServ:454 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:474 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:509 #, fuzzy, c-format msgid "Terminal Server Overview" msgstr "Overview drakTermServ" #: standalone/drakTermServ:510 #, fuzzy, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" " - Buat Image Etherboot:\n" " \t\tUtk mem-boot kernel via etherboot, image khusus kernel/initrd " "harus dibuat.\n" " \t\tmkinitrd-net melakukan sebagian besar kerja, drakTermServ " "hanyalah antarmuka grafis\n" " \t\tuntuk menolong manajemen/tuning image ini.\n" #: standalone/drakTermServ:516 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" " - Rawat /etc/dhcpd.conf:\n" " \t\tUtk me-net_boot klien, tiap klien perlu entri dhcpd.conf, " "menunjuk alamat IP\n" " \t\tdan image net boot ke komputer. drakTermServ menolong membuat/" "hapus entri ini.\n" "\t\t\t\n" " \t\t(Kartu PCI mungkin mengabaikan image - etherboot akan meminta " "image yg benar. Ingat\n" " \t\tbila etherboot mencari images, ia mengharap nama seperti\n" " \t\tboot-3c59x.nbi, bukan boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tContoh dhcpd.conf yg men-support klien diskless:" #: standalone/drakTermServ:534 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via XDMCP, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable XDMCP. Since there are " "security issues in \n" " using XDMCP, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" "\t\t\tAnda dapat memakai pool alamat IP, bukannya satu entri perklien dg\n" "\t\t\talamat tetap, dg menggunakan fungsi file konfigurasi spesifik-klien\n" "\t\t\tyg disajikan oleh ClusterNFS.\n" "\t\t\t\n" "\t\t\tCatatan: Entri \"#type\" hanya dipakai oleh drakTermServ. Klien dapat " "berupa \"kurus\"\n" "\t\t\tatau 'gemuk'. Klien kurus menjalankan sebagian besar software di " "server via XDMCP, sementara klien gemuk menjalankan sebagian besar\n" "\t\t\tsoftware di komputer klien. Pada inittab khusus, %s akan\n" "\t\t\tditulis untuk klien kurus. File konfigurasi sistem xdm-config, kdmrc, " "gdm.conf dimodifikasi\n" "\t\t\tjika klien kurus digunakan, untuk mengaktifkan XDMCP. Karena ada " "masalah keamanan dlm penggunaan XDMCP,\n" "\t\t\thosts.deny dan hosts.allow dimodifikasi untuk membatasi akses ke " "subnet lokal.\n" "\t\t\t\n" "\t\t\tCatatan: Lakukan stop/start server setelah menambahkan/mengubah klien." #: standalone/drakTermServ:554 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" " - Rawat /etc/exports:\n" " \t\tClusternfs memungkinkan ekspor sistem file root ke klien " "diskless. drakTermServ\n" " \t\tmensetup entri untuk mengizinkan akses anonim ke sistem file " "root\n" " \t\tdari klien diskless.\n" "\n" " \t\tContoh entri ekspor clusternfs:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tDg SUBNET/MASK terdefinisikan untuk jaringan Anda." #: standalone/drakTermServ:566 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" " - Rawat %s:\n" " \t\tAgar pengguna dapat login ke sistem dari klien diskless, entri\n" " \t\tdi /etc/shadow harus disalin ke %s. drakTermServ membantu\n" " \t\thal ini dg menambahkan/hapus pengguna sistem dari file ini." #: standalone/drakTermServ:570 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" " - %s masing-masing klien:\n" " \t\tVia clusternfs, tiap klien diskless dapat memiliki file " "konfigurasi sendiri\n" " \t\tdi sistemfile root server. drakTermServ nantinya akan membantu\n" " \t\tmembuat file-file ini." #: standalone/drakTermServ:575 #, fuzzy, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" " - File konfigurasi sistem per klien:\n" " \t\tVia clusternfs, tiap klien diskless dapat memiliki file " "konfiguras sendiri\n" " \t\tdi sistemfile root server. drakTermServ nantinya akan membantu\n" " \t\tmembuat file /etc/modules.conf, /etc/sysconfig/mouse, /etc/" "sysconfig/keyboard\n" " \t\ttiap klien.\n" #: standalone/drakTermServ:584 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical TFTP configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ mengkonfigurasikan file ini agar bekerja dlm " "hubungan dg image yg dibuat oleh\n" " \t\tmkinitrd-net, dan entri di /etc/dhcpd.conf, untuk melayani image " "boot ke tiap\n" " \t\tklien diskless.\n" "\n" " \t\tContoh file konfigurasi TFTP:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \t\tPerubahan dari instalasi standar adalah flag disable jadi 'no'\n" " \t\tdan path direktori jadi /var/lib/tftpboot, tempat mkinitrd-net\n" " \t\tmenaruh image." #: standalone/drakTermServ:605 #, fuzzy, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initiate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" " - Buat disket/CD etherboot:\n" " \t\tMesin klien diskless perlu image ROM di NIC, disket boot atau\n" " \t\tCD untuk memulai boot. drakTermServ membantu membuat image ini,\n" " \t\tberdasarkan NIC di komputer klien.\n" " \t\t\n" " \t\tContoh pembuatan disket boot untuk 3Com 3c509 secara manual:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" #: standalone/drakTermServ:640 #, c-format msgid "Boot Floppy" msgstr "Disket boot" #: standalone/drakTermServ:642 #, c-format msgid "Boot ISO" msgstr "ISO boot" #: standalone/drakTermServ:644 #, fuzzy, c-format msgid "PXE Image" msgstr "Image" #: standalone/drakTermServ:712 #, fuzzy, c-format msgid "Default kernel version" msgstr "versi kernel" #: standalone/drakTermServ:715 #, c-format msgid "Create PXE images." msgstr "" #: standalone/drakTermServ:745 #, c-format msgid "Build Whole Kernel -->" msgstr "Bangun Seluruh Kernel -->" #: standalone/drakTermServ:753 #, c-format msgid "No kernel selected!" msgstr "Tiada kernel terpilih!" #: standalone/drakTermServ:756 #, c-format msgid "Build Single NIC -->" msgstr "Bangun NIC Single -->" #: standalone/drakTermServ:760 #, c-format msgid "No NIC selected!" msgstr "Tidak ada NIC yg dipilih!" #: standalone/drakTermServ:763 #, c-format msgid "Build All Kernels -->" msgstr "Bangun Semua Kernel -->" #: standalone/drakTermServ:774 #, c-format msgid "<-- Delete" msgstr "<-- Hapus" #: standalone/drakTermServ:779 #, fuzzy, c-format msgid "No image selected!" msgstr "Tidak ada NIC yg dipilih!" #: standalone/drakTermServ:782 #, c-format msgid "Delete All NBIs" msgstr "Hapus Semua NBI" #: standalone/drakTermServ:908 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "!!! Menunjukkan bhw katasandi di database sistem berbeda dg yg di database\n" "Server Terminal. Hapus/tambahlah lagi pengguna ke Server Terminal agar\n" "dapat login." #: standalone/drakTermServ:913 #, c-format msgid "Add User -->" msgstr "Tambah pengguna -->" #: standalone/drakTermServ:919 #, c-format msgid "<-- Del User" msgstr "<-- Hapus Pengguna" #: standalone/drakTermServ:955 #, c-format msgid "type: %s" msgstr "tipe: %s" #: standalone/drakTermServ:959 #, c-format msgid "local config: %s" msgstr "konfigurasi lokal: %s" #: standalone/drakTermServ:989 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "Aktifkan konfigurasi hardware lokal." #: standalone/drakTermServ:998 #, c-format msgid "No net boot images created!" msgstr "Image boot jaringan tak dibuat!" #: standalone/drakTermServ:1017 #, c-format msgid "Thin Client" msgstr "Klien Thin" #: standalone/drakTermServ:1021 #, c-format msgid "Allow Thin Clients" msgstr "Izinkan Klien Thin" #: standalone/drakTermServ:1022 #, c-format msgid "" "Sync client X keyboard\n" " settings with server." msgstr "" #: standalone/drakTermServ:1023 #, c-format msgid "Add Client -->" msgstr "Tambah Klien -->" #: standalone/drakTermServ:1037 #, fuzzy, c-format msgid "type: fat" msgstr "tipe: %s" #: standalone/drakTermServ:1038 #, c-format msgid "type: thin" msgstr "tipe: tipis" #: standalone/drakTermServ:1045 #, c-format msgid "local config: false" msgstr "konfigurasi lokal: salah" #: standalone/drakTermServ:1046 #, fuzzy, c-format msgid "local config: true" msgstr "tak dikonfigurasikan" #: standalone/drakTermServ:1054 #, c-format msgid "<-- Edit Client" msgstr "<-- Edit Klien" #: standalone/drakTermServ:1080 #, c-format msgid "Disable Local Config" msgstr "Non-aktifkan Konfigurasi Lokal" #: standalone/drakTermServ:1087 #, c-format msgid "Delete Client" msgstr "Hapus Klien" #: standalone/drakTermServ:1096 #, c-format msgid "dhcpd Config..." msgstr "Konfig dhcpd..." #: standalone/drakTermServ:1111 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Manajer Display harus dijalankan ulang agar perubahan berlaku.\n" "(di konsol lakukan: service dm restart)" #: standalone/drakTermServ:1156 #, c-format msgid "Thin clients will not work with autologin. Disable autologin?" msgstr "" #: standalone/drakTermServ:1172 #, c-format msgid "All clients will use %s" msgstr "" #: standalone/drakTermServ:1204 #, c-format msgid "Subnet:" msgstr "Subnet:" #: standalone/drakTermServ:1211 #, c-format msgid "Netmask:" msgstr "Netmask:" #: standalone/drakTermServ:1218 #, c-format msgid "Routers:" msgstr "Router:" #: standalone/drakTermServ:1225 #, c-format msgid "Subnet Mask:" msgstr "Mask Subnet:" #: standalone/drakTermServ:1232 #, c-format msgid "Broadcast Address:" msgstr "Alamat Siaran(Broadcast):" #: standalone/drakTermServ:1239 #, c-format msgid "Domain Name:" msgstr "Nama domain:" #: standalone/drakTermServ:1247 #, c-format msgid "Name Servers:" msgstr "Server Nama:" #: standalone/drakTermServ:1258 #, c-format msgid "IP Range Start:" msgstr "Awal Kisaran IP:" #: standalone/drakTermServ:1259 #, c-format msgid "IP Range End:" msgstr "Akhir Kisaran IP:" #: standalone/drakTermServ:1301 #, c-format msgid "Append TS Includes To Existing Config" msgstr "" #: standalone/drakTermServ:1303 #, c-format msgid "Write Config" msgstr "Tulis konfigurasi" #: standalone/drakTermServ:1319 #, c-format msgid "dhcpd Server Configuration" msgstr "Konfigurasi Server dhcpd" #: standalone/drakTermServ:1320 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Sebagian besar nilai disusun dari sistem Anda\n" "yg sedang berjalan. Ubah seperlunya." #: standalone/drakTermServ:1323 #, c-format msgid "Dynamic IP Address Pool:" msgstr "Pool Alamat IP Dinamik" #: standalone/drakTermServ:1474 #, c-format msgid "Please insert floppy disk:" msgstr "Masukkan floppy:" #: standalone/drakTermServ:1478 #, c-format msgid "Could not access the floppy!" msgstr "Gagal akses ke floppy!" #: standalone/drakTermServ:1480 #, c-format msgid "Floppy can be removed now" msgstr "Disket dapat dilepas sekarang" #: standalone/drakTermServ:1483 #, c-format msgid "No floppy drive available!" msgstr "Floppy drive tak tersedia" #: standalone/drakTermServ:1488 #, fuzzy, c-format msgid "PXE image is %s/%s" msgstr "Image ISO Etherboot adalah %s" #: standalone/drakTermServ:1490 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "Error pada saat menulis file %s" #: standalone/drakTermServ:1500 #, c-format msgid "Etherboot ISO image is %s" msgstr "Image ISO Etherboot adalah %s" #: standalone/drakTermServ:1502 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Ada yg salah! - mkisofs sudah diinstal?" #: standalone/drakTermServ:1523 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Perlu bikin dulu /etc/dhcpd.conf first!" #: standalone/drakTermServ:1683 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1696 #, fuzzy, c-format msgid "%s is not a user..\n" msgstr "%s tak ditemukan...\n" #: standalone/drakTermServ:1697 #, fuzzy, c-format msgid "%s is already a Terminal Server user\n" msgstr "%s sudah dipakai\n" #: standalone/drakTermServ:1699 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1701 #, fuzzy, c-format msgid "%s added to Terminal Server\n" msgstr "Tak berguna tanpa Server Terminal" #: standalone/drakTermServ:1718 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr "Terdeteksi %s" #: standalone/drakTermServ:1720 standalone/drakTermServ:1793 #, c-format msgid "%s not found...\n" msgstr "%s tak ditemukan...\n" #: standalone/drakTermServ:1821 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "/etc/hosts.allow dan /etc/hosts.deny sudah dikonfigurasikan - tak diubah" #: standalone/drakTermServ:1961 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:38 #, c-format msgid "Error!" msgstr "Ada Kesalahan" #: standalone/drakautoinst:39 #, c-format msgid "I can not find needed image file `%s'." msgstr "File image `%s' tak ditemukan." #: standalone/drakautoinst:41 #, c-format msgid "Auto Install Configurator" msgstr "Konfigurasi Instalasi Otomatis" #: standalone/drakautoinst:42 #, fuzzy, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "Konfigurasi disket Instalasi Otomatis akan dilakukan. Fitur ini agak " "berbahaya dan harus hati-hati digunakan.\n" "\n" "Dg fitur ini, Anda akan dapat mengulang instalasi yang Anda terapkan pada " "komputer ini, sementara pada beberapa tahapan akan ada pertanyaan interaktif " "untuk mengubah nilainya.\n" "\n" "Utk keamanan maximum, proses partisi dan format takkan pernah dijalankan\n" "secara otomatis, apapun yg Anda pilih selama instalasi komputer ini.\n" "\n" "Jalan terus?" #: standalone/drakautoinst:60 #, c-format msgid "replay" msgstr "ulang" #: standalone/drakautoinst:60 standalone/drakautoinst:69 #, c-format msgid "manual" msgstr "manual" #: standalone/drakautoinst:64 #, c-format msgid "Automatic Steps Configuration" msgstr "Konfigurasi Step Otomatis" #: standalone/drakautoinst:65 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Pada tiap tahapan pilih apakah instalasi akan diulang, atau akan manual" #: standalone/drakautoinst:77 standalone/drakautoinst:78 #: standalone/drakautoinst:92 #, c-format msgid "Creating auto install floppy" msgstr "Disket auto install sedang dibuat" #: standalone/drakautoinst:90 #, fuzzy, c-format msgid "Insert another blank floppy in drive %s (for drivers disk)" msgstr "Masukkan disket kosong di drive %s" #: standalone/drakautoinst:91 #, fuzzy, c-format msgid "Creating auto install floppy (drivers disk)" msgstr "Disket auto install sedang dibuat" #: standalone/drakautoinst:158 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Selamat Datang.\n" "\n" "Parameter instalasi otomatis tersedia di bagian sebelah kiri" #: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 #: standalone/scannerdrake:405 #, c-format msgid "Congratulations!" msgstr "Selamat!" #: standalone/drakautoinst:253 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "Floppy sukses dibuat. Instalasi bisa direplikasi." #: standalone/drakautoinst:289 #, c-format msgid "Auto Install" msgstr "Instalasi Otomatis" #: standalone/drakautoinst:358 #, c-format msgid "Add an item" msgstr "Tambah item" #: standalone/drakautoinst:365 #, c-format msgid "Remove the last item" msgstr "Hapus item terakhir" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "hd" msgstr "Chad" #: standalone/drakbackup:88 #, fuzzy, c-format msgid "tape" msgstr "Tape" #: standalone/drakbackup:152 #, c-format msgid "" "Expect is an extension to the TCL scripting language that allows interactive " "sessions without user intervention." msgstr "" "Expect adalah kepanjangan bahasa skrip TCL yg memungkinkan sesi interaktif " "tanpa intervensi pengguna." #: standalone/drakbackup:153 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "Simpan katasandi sistem di konfigurasi drakbackup." #: standalone/drakbackup:154 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" "Pada CD multisesi, hanya sesi pertama yg akan menghapus cdrw. Lainnya, cdrw " "dihapus sebelum tiap backup." #: standalone/drakbackup:155 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" "Opsi ini akan menyimpan file yg telah berubah, menurut mode yg digunakan " "(incremental atau differential)." #: standalone/drakbackup:156 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" "Backup incremental hanya menyimpan file yg telah berubah atau yg baru " "semenjak backup terakhir." #: standalone/drakbackup:157 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:158 #, fuzzy, c-format msgid "" "This should be a local user or email address that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" "Daftar (dipisahkan oleh koma) pengguna lokal atau alamat email ke mana hasil " "backup akan dikirim. Anda memerlukan agen transfer mail yg berfungsi dg " "benar." #: standalone/drakbackup:159 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" "File atau wildcard yg terdaftar dalam file .backupignore pada puncak pohon " "direktori takkan di-backup." #: standalone/drakbackup:160 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" "Utk backup ke media lain, file tetap dibuat di harddisk, lalu dipindah ke " "media lain. Pengaktifan opsi ini akan menghapus file tar di harddisk setelah " "backup." #: standalone/drakbackup:161 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" "Bbrp protokol, misalnya rsync, dikonfigurasikan di pihak server. Nama " "'modul' path servis akan dipakai, bukan path direktori." #: standalone/drakbackup:162 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:326 #, c-format msgid "No media selected for cron operation." msgstr "" #: standalone/drakbackup:330 #, c-format msgid "No interval selected for cron operation." msgstr "" #: standalone/drakbackup:377 #, fuzzy, c-format msgid "Interval cron not available as non-root" msgstr "Cron non-root belum tersedia" #: standalone/drakbackup:462 standalone/logdrake:437 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:466 standalone/logdrake:442 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:475 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "Daftar pengguna berubah, file konfigurasi ditulis ulang." #: standalone/drakbackup:477 #, c-format msgid "Old user list:\n" msgstr "Daftar pengguna lama:\n" #: standalone/drakbackup:479 #, c-format msgid "New user list:\n" msgstr "Daftar pengguna baru:\n" #: standalone/drakbackup:524 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " Laporan DrakBackup \n" #: standalone/drakbackup:525 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Laporan Daemon DrakBackup\n" #: standalone/drakbackup:531 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " Detil Laporan DrakBackup\n" "\n" "\n" #: standalone/drakbackup:556 standalone/drakbackup:627 #: standalone/drakbackup:683 #, fuzzy, c-format msgid "Total progress" msgstr "Total perkembangan" #: standalone/drakbackup:609 #, fuzzy, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "Ada %s, hapus?\n" "\n" "Awas: Jika Anda telah melakukan proses ini Anda mungkin perlu\n" " membersihkan entri dari authorized_keys pada server." #: standalone/drakbackup:618 #, c-format msgid "This may take a moment to generate the keys." msgstr "Perlu waktu untuk membuat kunci" #: standalone/drakbackup:625 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "ERROR: Tak dapat menghasilkan %s." #: standalone/drakbackup:642 #, c-format msgid "No password prompt on %s at port %s" msgstr "Tiada prompt katasandi di %s pada port %s" #: standalone/drakbackup:643 #, c-format msgid "Bad password on %s" msgstr "Salah katasandi pada %s" #: standalone/drakbackup:644 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Tak ada izin pemindahan %s ke %s" #: standalone/drakbackup:645 #, c-format msgid "Can not find %s on %s" msgstr "%s di %s tak tercari" #: standalone/drakbackup:649 #, c-format msgid "%s not responding" msgstr "tak ada respon %s" #: standalone/drakbackup:653 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Transfer sukses\n" "Anda mungkin ingin mengecek Anda dapat login ke server dg:\n" "\n" "ssh -i %s %s@%s\n" "\n" "tanpa ditanyai katasandi." #: standalone/drakbackup:697 #, c-format msgid "WebDAV remote site already in sync!" msgstr "Situs remote WebDAV telah sinkron!" #: standalone/drakbackup:701 #, c-format msgid "WebDAV transfer failed!" msgstr "Transfer WebDAV gagal!" #: standalone/drakbackup:722 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Tiada CDR/DVDR di drive!" #: standalone/drakbackup:726 #, c-format msgid "Does not appear to be recordable media!" msgstr "Tampaknya bukan media yang dapat merekam!" #: standalone/drakbackup:731 #, c-format msgid "Not erasable media!" msgstr "Media tak terhapuskan" #: standalone/drakbackup:773 #, c-format msgid "This may take a moment to erase the media." msgstr "Perlu waktu untuk menghapus media." #: standalone/drakbackup:831 #, c-format msgid "Permission problem accessing CD." msgstr "Problem izin pada akses CD." #: standalone/drakbackup:858 #, c-format msgid "No tape in %s!" msgstr "Tak ada pita di %s!" #: standalone/drakbackup:965 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:984 standalone/drakbackup:1017 #, c-format msgid "Backup system files..." msgstr "Backup file sistem..." #: standalone/drakbackup:1018 standalone/drakbackup:1059 #, c-format msgid "Hard Disk Backup files..." msgstr "File Backup Hard Disk..." #: standalone/drakbackup:1058 #, c-format msgid "Backup User files..." msgstr "Backup file pengguna..." #: standalone/drakbackup:1093 #, c-format msgid "Backup Other files..." msgstr "Backup file lain..." #: standalone/drakbackup:1094 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Kemajuan Backup Hard Disk..." #: standalone/drakbackup:1099 #, c-format msgid "No changes to backup!" msgstr "Tak ada perubahan backup!" #: standalone/drakbackup:1117 standalone/drakbackup:1141 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Aktivitas drakbackup via %s:\n" "\n" #: standalone/drakbackup:1126 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Problem koneksi FTP: Gagal mengirim file backup dengan FTP.\n" #: standalone/drakbackup:1127 #, fuzzy, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Error saat pengiriman file via FTP.\n" " Betulkan konfigurasi FTP Anda." #: standalone/drakbackup:1129 #, fuzzy, c-format msgid "file list sent by FTP: %s\n" msgstr "" "daftar file yg dikirim oleh FTP: %s\n" " " #: standalone/drakbackup:1146 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Aktivitas drakbackup via CD:\n" "\n" #: standalone/drakbackup:1151 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Aktivitas drakbackup via tape:\n" "\n" #: standalone/drakbackup:1160 #, fuzzy, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" "Error saat sendmail.\n" " Surat laporan Anda tak terkirim.\n" " Mohon konfigurasikan sendmail" #: standalone/drakbackup:1161 #, c-format msgid " Error while sending mail. \n" msgstr " Kesalahan saat pengiriman surat. \n" #: standalone/drakbackup:1191 #, c-format msgid "Can not create catalog!" msgstr "Katalog tak dapat dibuat!" #: standalone/drakbackup:1420 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Periksa semua opsi yang Anda inginkan.\n" #: standalone/drakbackup:1421 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Opsi ini memungkinkan backup / restorasi semua file di direktori /etc.\n" #: standalone/drakbackup:1422 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Backup file System Anda. (direktori /etc)" #: standalone/drakbackup:1423 standalone/drakbackup:1487 #: standalone/drakbackup:1553 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "Pakai Backup Incremental/Diferensial (tak menghapus backup lama)" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, c-format msgid "Use Incremental Backups" msgstr "Pakai Backup Incremental" #: standalone/drakbackup:1425 standalone/drakbackup:1489 #: standalone/drakbackup:1555 #, c-format msgid "Use Differential Backups" msgstr "Gunakan Backup Diferensial" #: standalone/drakbackup:1427 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Tidak memasukkan file penting (passwd, group, fstab)" #: standalone/drakbackup:1428 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "Dengan opsi ini Anda dapat menyimpan ulang semua versi direktori /etc." #: standalone/drakbackup:1459 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "Periksa semua pengguna yang ingin Anda masukkan ke backup." #: standalone/drakbackup:1486 #, c-format msgid "Do not include the browser cache" msgstr "Jangan masukkan cache browser" #: standalone/drakbackup:1540 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "Pilih file atau direktori dan klik 'OK'" #: standalone/drakbackup:1541 standalone/drakfont:661 #, c-format msgid "Remove Selected" msgstr "Hapus Pilihan" #: standalone/drakbackup:1604 #, c-format msgid "Users" msgstr "Pengguna" #: standalone/drakbackup:1624 #, c-format msgid "Use network connection to backup" msgstr "Pakai koneksi jaringan untuk backup" #: standalone/drakbackup:1626 #, c-format msgid "Net Method:" msgstr "Metode Jaring:" #: standalone/drakbackup:1630 #, c-format msgid "Use Expect for SSH" msgstr "Pakai Expect untuk SSH" #: standalone/drakbackup:1631 #, fuzzy, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" "Buat/Transfer\n" "kunci cadangan SSH" #: standalone/drakbackup:1633 #, fuzzy, c-format msgid "Transfer Now" msgstr "" " Transfer \n" "Sekarang" #: standalone/drakbackup:1635 #, fuzzy, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" "Kunci lain (bukan drakbackup)\n" "sudah ada di tempat" #: standalone/drakbackup:1638 #, fuzzy, c-format msgid "Host name or IP." msgstr "Nama Host" #: standalone/drakbackup:1643 #, fuzzy, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" "Masukkan direktori (atau modul) untuk\n" " meletakkan backup di host ini." #: standalone/drakbackup:1655 #, c-format msgid "Remember this password" msgstr "Ingat katasandi ini" #: standalone/drakbackup:1671 #, c-format msgid "Need hostname, username and password!" msgstr "Perlu namahost, namapengguna dan katasandi!" #: standalone/drakbackup:1762 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Pakai CD/DVDROM untuk backup" #: standalone/drakbackup:1765 #, c-format msgid "Choose your CD/DVD device" msgstr "Pilih device CD/DVD" #: standalone/drakbackup:1770 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "Pilih ukuran media CD/DVD (Mb)" #: standalone/drakbackup:1777 #, c-format msgid "Multisession CD" msgstr "CD multisesi" #: standalone/drakbackup:1779 #, c-format msgid "CDRW media" msgstr "media CDRW" #: standalone/drakbackup:1785 #, c-format msgid "Erase your RW media (1st Session)" msgstr "Hapus media RW (sesi pertama)" #: standalone/drakbackup:1786 #, c-format msgid " Erase Now " msgstr " Hapus Sekarang " #: standalone/drakbackup:1792 #, fuzzy, c-format msgid "DVD+RW media" msgstr "media CDRW" #: standalone/drakbackup:1794 #, fuzzy, c-format msgid "DVD-R media" msgstr "media CDRW" #: standalone/drakbackup:1796 #, fuzzy, c-format msgid "DVDRAM device" msgstr "device" #: standalone/drakbackup:1827 #, c-format msgid "No CD device defined!" msgstr "Tidak ada alat CD didefinisikan!" #: standalone/drakbackup:1869 #, c-format msgid "Use tape to backup" msgstr "Gunakan pita untuk backup" #: standalone/drakbackup:1872 #, fuzzy, c-format msgid "Device name to use for backup" msgstr "Masukkan nama alat untuk backup" #: standalone/drakbackup:1878 #, c-format msgid "Backup directly to tape" msgstr "" #: standalone/drakbackup:1884 #, c-format msgid "Do not rewind tape after backup" msgstr "Jangan putar balik pita setelah backup" #: standalone/drakbackup:1890 #, c-format msgid "Erase tape before backup" msgstr "Hapus pita sebelum backup" #: standalone/drakbackup:1896 #, c-format msgid "Eject tape after the backup" msgstr "Eject pita setelah backup" #: standalone/drakbackup:1968 #, c-format msgid "Enter the directory to save to:" msgstr "Masukkan direktori untuk penyimpanan:" #: standalone/drakbackup:1972 #, fuzzy, c-format msgid "Directory to save to" msgstr "Masukkan direktori untuk penyimpanan:" #: standalone/drakbackup:1977 #, fuzzy, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Masukkan ukuran maximum\n" " yg diizinkan untuk Drakbackup" #: standalone/drakbackup:2041 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: standalone/drakbackup:2046 #, c-format msgid "HardDrive / NFS" msgstr "HardDrive / NFS" #: standalone/drakbackup:2061 standalone/drakbackup:2062 #: standalone/drakbackup:2067 #, c-format msgid "hourly" msgstr "perjam" #: standalone/drakbackup:2061 standalone/drakbackup:2063 #: standalone/drakbackup:2068 #, c-format msgid "daily" msgstr "harian" #: standalone/drakbackup:2061 standalone/drakbackup:2064 #: standalone/drakbackup:2069 #, c-format msgid "weekly" msgstr "mingguan" #: standalone/drakbackup:2061 standalone/drakbackup:2065 #: standalone/drakbackup:2070 #, c-format msgid "monthly" msgstr "bulanan" #: standalone/drakbackup:2061 standalone/drakbackup:2066 #: standalone/drakbackup:2071 #, fuzzy, c-format msgid "custom" msgstr "Custom" #: standalone/drakbackup:2075 #, c-format msgid "January" msgstr "Januari" #: standalone/drakbackup:2075 #, c-format msgid "February" msgstr "Pebruari" #: standalone/drakbackup:2075 #, c-format msgid "March" msgstr "Maret" #: standalone/drakbackup:2076 #, c-format msgid "April" msgstr "April" #: standalone/drakbackup:2076 #, c-format msgid "May" msgstr "Mei" #: standalone/drakbackup:2076 #, c-format msgid "June" msgstr "Juni" #: standalone/drakbackup:2076 #, c-format msgid "July" msgstr "Juli" #: standalone/drakbackup:2076 #, c-format msgid "August" msgstr "Agustus" #: standalone/drakbackup:2076 #, c-format msgid "September" msgstr "September" #: standalone/drakbackup:2077 #, c-format msgid "October" msgstr "Oktober" #: standalone/drakbackup:2077 #, c-format msgid "November" msgstr "November" #: standalone/drakbackup:2077 #, c-format msgid "December" msgstr "Desember" #: standalone/drakbackup:2080 #, c-format msgid "Sunday" msgstr "Minggu" #: standalone/drakbackup:2080 #, c-format msgid "Monday" msgstr "Senin" #: standalone/drakbackup:2080 #, c-format msgid "Tuesday" msgstr "Selasa" #: standalone/drakbackup:2081 #, c-format msgid "Wednesday" msgstr "Rabu" #: standalone/drakbackup:2081 #, c-format msgid "Thursday" msgstr "Kamis" #: standalone/drakbackup:2081 #, c-format msgid "Friday" msgstr "Jumat" #: standalone/drakbackup:2081 #, c-format msgid "Saturday" msgstr "Sabtu" #: standalone/drakbackup:2113 #, c-format msgid "Use daemon" msgstr "Pakai daemon" #: standalone/drakbackup:2117 #, fuzzy, c-format msgid "Please choose the time interval between each backup" msgstr "Pilih interval waktu backup" #: standalone/drakbackup:2123 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2128 #, c-format msgid "Minute" msgstr "Menit" #: standalone/drakbackup:2132 #, c-format msgid "Hour" msgstr "Jam" #: standalone/drakbackup:2136 #, c-format msgid "Day" msgstr "Hari" #: standalone/drakbackup:2140 #, c-format msgid "Month" msgstr "Bulan" #: standalone/drakbackup:2144 #, fuzzy, c-format msgid "Weekday" msgstr "Rabu" #: standalone/drakbackup:2150 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "Pilih media backup." #: standalone/drakbackup:2156 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" "Pastikan daemon cron masuk dalam daftar servis.\n" "\n" "Ingat bahwa kini semua media 'net' juga menggunakan harddisk." #: standalone/drakbackup:2157 #, c-format msgid "" "If your machine is not on all the time, you might want to install anacron." msgstr "" #: standalone/drakbackup:2158 #, fuzzy, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "Pastikan daemon cron masuk dalam daftar servis.\n" "\n" "Ingat bahwa kini semua media 'net' juga menggunakan harddisk." #: standalone/drakbackup:2205 #, fuzzy, c-format msgid "Please choose the compression type" msgstr "pilih tanggal restorasi" #: standalone/drakbackup:2209 #, c-format msgid "Use .backupignore files" msgstr "Pakai file .backupignore" #: standalone/drakbackup:2211 #, c-format msgid "Send mail report after each backup to:" msgstr "Kirim laporan mail setelah tiap backup ke :" #: standalone/drakbackup:2217 #, fuzzy, c-format msgid "SMTP server for mail:" msgstr "Host server SMB" #: standalone/drakbackup:2222 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "Hapus file tar Harddisk setelah backup ke media lain." #: standalone/drakbackup:2262 #, c-format msgid "What" msgstr "Apa" #: standalone/drakbackup:2267 #, c-format msgid "Where" msgstr "Mana" #: standalone/drakbackup:2272 #, c-format msgid "When" msgstr "Kapan" #: standalone/drakbackup:2277 #, c-format msgid "More Options" msgstr "Opsi Tambahan" #: standalone/drakbackup:2290 #, fuzzy, c-format msgid "Backup destination not configured..." msgstr "Fungsi network tak dikonfigurasi" #: standalone/drakbackup:2310 standalone/drakbackup:4234 #, c-format msgid "Drakbackup Configuration" msgstr "Konfigurasi Drakbackup" #: standalone/drakbackup:2326 #, c-format msgid "Please choose where you want to backup" msgstr "Pilih tempat backup" #: standalone/drakbackup:2329 #, fuzzy, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "Hapus file tar Harddisk setelah backup ke media lain." #: standalone/drakbackup:2329 #, c-format msgid "Across Network" msgstr "lewat Network" #: standalone/drakbackup:2329 #, c-format msgid "On CD-R" msgstr "di CDROM" #: standalone/drakbackup:2329 #, c-format msgid "On Tape Device" msgstr "di Device Pita" #: standalone/drakbackup:2375 #, c-format msgid "Backup Users" msgstr "Backup Pengguna" #: standalone/drakbackup:2376 #, fuzzy, c-format msgid " (Default is all users)" msgstr "Pengguna standar" #: standalone/drakbackup:2389 #, c-format msgid "Please choose what you want to backup" msgstr "Pilih apa yang akan di-backup" #: standalone/drakbackup:2390 #, c-format msgid "Backup System" msgstr "Backup sistem" #: standalone/drakbackup:2392 #, c-format msgid "Select user manually" msgstr "Pilih pengguna secara manual" #: standalone/drakbackup:2421 #, c-format msgid "Please select data to backup..." msgstr "Pilih data backup..." #: standalone/drakbackup:2493 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Sumber Backup: \n" #: standalone/drakbackup:2494 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- File Sistem:\n" #: standalone/drakbackup:2496 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- File Pengguna:\n" #: standalone/drakbackup:2498 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- File Lain:\n" #: standalone/drakbackup:2500 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Simpan di Hard drive di path: %s\n" #: standalone/drakbackup:2501 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2504 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Hapus file tar harddisk setelah backup.\n" #: standalone/drakbackup:2509 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Bakar ke CD" #: standalone/drakbackup:2510 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2511 #, c-format msgid " on device: %s" msgstr " di device: %s" #: standalone/drakbackup:2512 #, c-format msgid " (multi-session)" msgstr " (multi-session)" #: standalone/drakbackup:2513 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Simpan ke tape di alat: %s" #: standalone/drakbackup:2514 #, c-format msgid "\t\tErase=%s" msgstr "\t\tHapus=%s" #: standalone/drakbackup:2516 #, c-format msgid "\tBackup directly to Tape\n" msgstr "" #: standalone/drakbackup:2518 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Simpan via %s di host: %s\n" #: standalone/drakbackup:2519 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t name pengguna: %s\n" "\t\t di path: %s \n" #: standalone/drakbackup:2520 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Opsi:\n" #: standalone/drakbackup:2521 #, c-format msgid "\tDo not include System Files\n" msgstr "\tJangan masukkan File Sistem\n" #: standalone/drakbackup:2523 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tBackup dengan tar dan bzip2\n" #: standalone/drakbackup:2524 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tBackup dengan tar dan gzip\n" #: standalone/drakbackup:2525 #, fuzzy, c-format msgid "\tBackups use tar only\n" msgstr "\tBackup dengan tar dan gzip\n" #: standalone/drakbackup:2527 #, c-format msgid "\tUse .backupignore files\n" msgstr "\tPakai file .backupignore\n" #: standalone/drakbackup:2528 #, c-format msgid "\tSend mail to %s\n" msgstr "\tKirim mail ke %s\n" #: standalone/drakbackup:2529 #, fuzzy, c-format msgid "\tUsing SMTP server %s\n" msgstr "Di server CUPS \"%s\"" #: standalone/drakbackup:2531 #, fuzzy, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Cakupan daemon (%s) :\n" #: standalone/drakbackup:2532 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Hard drive.\n" #: standalone/drakbackup:2533 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: standalone/drakbackup:2534 #, c-format msgid "\t-Tape \n" msgstr "\t-Tape \n" #: standalone/drakbackup:2535 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Network dg FTP.\n" #: standalone/drakbackup:2536 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Network dg SSH.\n" #: standalone/drakbackup:2537 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Network dg rsync.\n" #: standalone/drakbackup:2538 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Network dg webdav.\n" #: standalone/drakbackup:2540 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Tiada konfigurasi, mohon klik Dukun atau Lanjutan.\n" #: standalone/drakbackup:2545 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Daftar data restorasi:\n" "\n" #: standalone/drakbackup:2547 #, fuzzy, c-format msgid "- Restore System Files.\n" msgstr "" "\n" "- File Sistem:\n" #: standalone/drakbackup:2549 standalone/drakbackup:2559 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2552 #, fuzzy, c-format msgid "- Restore User Files: \n" msgstr "" "\n" "- File Pengguna:\n" #: standalone/drakbackup:2557 #, fuzzy, c-format msgid "- Restore Other Files: \n" msgstr "" "\n" "- File Lain:\n" #: standalone/drakbackup:2736 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Daftar data rusak:\n" "\n" #: standalone/drakbackup:2738 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Mohon uncheck atau hapus nanti." #: standalone/drakbackup:2748 #, c-format msgid "Backup files are corrupted" msgstr "File backup rusak" #: standalone/drakbackup:2769 #, c-format msgid " All of your selected data have been " msgstr " Semua data terpilih telah " #: standalone/drakbackup:2770 #, c-format msgid " Successfully Restored on %s " msgstr " Berhasil Direstorasi di %s " #: standalone/drakbackup:2890 #, c-format msgid " Restore Configuration " msgstr " Restorasi Konfigurasi " #: standalone/drakbackup:2918 #, c-format msgid "OK to restore the other files." msgstr "OK untuk restorasi file lain." #: standalone/drakbackup:2934 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" "Daftar pengguna restorasi (hanya tanggal terakhir per pengguna yg penting)" #: standalone/drakbackup:2999 #, fuzzy, c-format msgid "Please choose the date to restore:" msgstr "pilih tanggal restorasi" #: standalone/drakbackup:3036 #, c-format msgid "Restore from Hard Disk." msgstr "Restorasi dari Hard Disk." #: standalone/drakbackup:3038 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "Masukkan direktori tempat backup disimpan" #: standalone/drakbackup:3042 #, fuzzy, c-format msgid "Directory with backups" msgstr "Restorasi semua backup" #: standalone/drakbackup:3096 #, c-format msgid "Select another media to restore from" msgstr "Pilih media lain untuk direstorasi" #: standalone/drakbackup:3098 #, c-format msgid "Other Media" msgstr "Media Lain" #: standalone/drakbackup:3103 #, c-format msgid "Restore system" msgstr "Restorasi sistem" #: standalone/drakbackup:3104 #, c-format msgid "Restore Users" msgstr "Restorasi Pengguna" #: standalone/drakbackup:3105 #, c-format msgid "Restore Other" msgstr "Restorasi Lain-lain" #: standalone/drakbackup:3107 #, c-format msgid "Select path to restore (instead of /)" msgstr "pilih path untuk restorasi (selain /)" #: standalone/drakbackup:3111 standalone/drakbackup:3393 #, fuzzy, c-format msgid "Path To Restore To" msgstr "Restorasi pilihan sendiri" #: standalone/drakbackup:3114 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" "Lakukan backup baru sebelum restorasi (hanya untuk backup incremental.)" #: standalone/drakbackup:3116 #, c-format msgid "Remove user directories before restore." msgstr "Hapus direktori pengguna sebelum restorasi." #: standalone/drakbackup:3201 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3204 #, c-format msgid "Search Backups" msgstr "Cari Backup" #: standalone/drakbackup:3222 #, fuzzy, c-format msgid "No matches found..." msgstr "Image tak ditemukan" #: standalone/drakbackup:3226 #, c-format msgid "Restore Selected" msgstr "Restorasi Terpilih" #: standalone/drakbackup:3361 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3367 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "Restorasi Entri\n" "Katalog Terpilih" #: standalone/drakbackup:3376 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Restorasi File\n" "Terpilih" #: standalone/drakbackup:3453 #, c-format msgid "Backup files not found at %s." msgstr "File backup tak ditemukan di %s." #: standalone/drakbackup:3466 #, c-format msgid "Restore From CD" msgstr "Restorasi Dari CD" #: standalone/drakbackup:3466 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Masukkan CD dengan label %s\n" " ke drive CD di titik mount /mnt/cdrom" #: standalone/drakbackup:3468 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "Bukan label CD yang benar. Disk berlabel %s." #: standalone/drakbackup:3478 #, c-format msgid "Restore From Tape" msgstr "Restorasi Dari Pita" #: standalone/drakbackup:3478 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Masukkan pita dengan label %s\n" " ke drive pita device %s" #: standalone/drakbackup:3480 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Bukan label pita yang benar. Pita berlabel %s." #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network" msgstr "Restorasi Via Jaringan" #: standalone/drakbackup:3491 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Restorasi Via Protokol Jaringan: %s" #: standalone/drakbackup:3492 #, c-format msgid "Host Name" msgstr "Nama Host" #: standalone/drakbackup:3493 #, c-format msgid "Host Path or Module" msgstr "Path atau Modul Host" #: standalone/drakbackup:3500 #, c-format msgid "Password required" msgstr "Katasandi dibutuhkan" #: standalone/drakbackup:3506 #, c-format msgid "Username required" msgstr "Nama pengguna dibutuhkan" #: standalone/drakbackup:3509 #, c-format msgid "Hostname required" msgstr "Nama Host dibutuhkan" #: standalone/drakbackup:3514 #, c-format msgid "Path or Module required" msgstr "Path atau Modul dibutuhkan" #: standalone/drakbackup:3527 #, c-format msgid "Files Restored..." msgstr "File Telah Direstorasi..." #: standalone/drakbackup:3530 #, c-format msgid "Restore Failed..." msgstr "Restorasi Gagal..." #: standalone/drakbackup:3548 #, fuzzy, c-format msgid "%s not retrieved..." msgstr "%s tak ditemukan...\n" #: standalone/drakbackup:3770 standalone/drakbackup:3839 #, c-format msgid "Search for files to restore" msgstr "Cari file untuk direstorasi" #: standalone/drakbackup:3774 #, c-format msgid "Restore all backups" msgstr "Restorasi semua backup" #: standalone/drakbackup:3782 #, c-format msgid "Custom Restore" msgstr "Restorasi pilihan sendiri" #: standalone/drakbackup:3786 standalone/drakbackup:3835 #, c-format msgid "Restore From Catalog" msgstr "Restorasi Dari Katalog" #: standalone/drakbackup:3807 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "Pilih data untuk direstorasi..." #: standalone/drakbackup:3808 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Sudah benar?" #: standalone/drakbackup:3809 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:3811 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:3827 #, c-format msgid "CD in place - continue." msgstr "CD di tempat - lanjuntukan." #: standalone/drakbackup:3832 #, c-format msgid "Browse to new restore repository." msgstr "Jelajahi repositori restorasi baru." #: standalone/drakbackup:3833 #, fuzzy, c-format msgid "Directory To Restore From" msgstr "Restorasi Dari CD" #: standalone/drakbackup:3869 #, c-format msgid "Restore Progress" msgstr "Perkembangan Restorasi" #: standalone/drakbackup:3980 #, c-format msgid "Build Backup" msgstr "Bangun Backup" #: standalone/drakbackup:4013 standalone/drakbackup:4333 #, c-format msgid "Restore" msgstr "Restorasi" #: standalone/drakbackup:4101 #, c-format msgid "The following packages need to be installed:\n" msgstr "Paket berikut perlu diinstal:\n" #: standalone/drakbackup:4128 #, c-format msgid "Please select data to restore..." msgstr "Pilih data untuk direstorasi..." #: standalone/drakbackup:4168 #, c-format msgid "Backup system files" msgstr "Backup file sistem" #: standalone/drakbackup:4171 #, c-format msgid "Backup user files" msgstr "Backup file pengguna" #: standalone/drakbackup:4174 #, c-format msgid "Backup other files" msgstr "Backup file lain" #: standalone/drakbackup:4177 standalone/drakbackup:4211 #, c-format msgid "Total Progress" msgstr "Total Kemajuan" #: standalone/drakbackup:4203 #, c-format msgid "Sending files by FTP" msgstr "Kirim file dg FTP" #: standalone/drakbackup:4206 #, c-format msgid "Sending files..." msgstr "Kirim file..." #: standalone/drakbackup:4276 #, c-format msgid "Backup Now from configuration file" msgstr "Backup Sekarang dari file konfigurasi" #: standalone/drakbackup:4281 #, c-format msgid "View Backup Configuration." msgstr "Lihat Konfigurasi Backup." #: standalone/drakbackup:4307 #, c-format msgid "Wizard Configuration" msgstr "Konfigurasi Dukun" #: standalone/drakbackup:4312 #, c-format msgid "Advanced Configuration" msgstr "Konfigurasi Lanjutan" #: standalone/drakbackup:4317 #, c-format msgid "View Configuration" msgstr "Lihat Konfigurasi" #: standalone/drakbackup:4321 #, c-format msgid "View Last Log" msgstr "Lihat Log Terakhir" #: standalone/drakbackup:4326 #, c-format msgid "Backup Now" msgstr "Backup Sekarang" #: standalone/drakbackup:4330 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "File konfigurasi tak ditemukan\n" "silakan klik Dukun atau Lanjutan" #: standalone/drakbackup:4350 standalone/drakbackup:4353 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:64 #, fuzzy, c-format msgid "Graphical boot theme selection" msgstr "Seleksi model printer" #: standalone/drakboot:64 #, c-format msgid "System mode" msgstr "Mode sistem" #: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:187 #: standalone/harddrake2:188 standalone/logdrake:70 #: standalone/printerdrake:138 standalone/printerdrake:139 #: standalone/printerdrake:140 #, c-format msgid "/_File" msgstr "/_File" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/File/_Keluar" #: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:188 #: standalone/logdrake:76 standalone/printerdrake:140 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:148 #, c-format msgid "Install themes" msgstr "Instal tema" #: standalone/drakboot:149 #, c-format msgid "Create new theme" msgstr "Buat tema baru" #: standalone/drakboot:161 #, c-format msgid "Use graphical boot" msgstr "" #: standalone/drakboot:166 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:167 #, fuzzy, c-format msgid "Do you want to configure it now?" msgstr "Anda ingin tes konfigurasi ini?" #: standalone/drakboot:177 #, c-format msgid "Theme" msgstr "Tema" #: standalone/drakboot:180 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Display tema\n" "di konsol" #: standalone/drakboot:189 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Jalankan X-Window saat sistem dimulai" #: standalone/drakboot:197 #, c-format msgid "No, I do not want autologin" msgstr "Tidak, saya tak mau autologin" #: standalone/drakboot:198 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ya, saya mau autologin dg (pengguna, desktop) ini" #: standalone/drakboot:201 #, c-format msgid "Default user" msgstr "Pengguna standar" #: standalone/drakboot:202 #, c-format msgid "Default desktop" msgstr "Desktop standar" #: standalone/drakboot:310 #, c-format msgid "" "Please choose a video mode, it will be applied to each of the boot entries " "selected below.\n" "Be sure your video card supports the mode you choose." msgstr "" #: standalone/drakbug:41 #, fuzzy, c-format msgid "Mandrakelinux Bug Report Tool" msgstr "Pelapor Kutu Mandrake" #: standalone/drakbug:46 #, c-format msgid "Mandrakelinux Control Center" msgstr "Pusat Kontrol Mandrakelinux" #: standalone/drakbug:48 #, c-format msgid "Synchronization tool" msgstr "Sinkronisator" #: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 #: standalone/drakbug:150 standalone/drakbug:154 #, c-format msgid "Standalone Tools" msgstr "Alat Mandiri" #: standalone/drakbug:50 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:51 #, c-format msgid "Mandrakeonline" msgstr "Mandrakeonline" #: standalone/drakbug:52 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:53 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:54 #, c-format msgid "Remote Control" msgstr "Kontrol Remote" #: standalone/drakbug:55 #, c-format msgid "Software Manager" msgstr "Manajer Software" #: standalone/drakbug:56 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:57 #, c-format msgid "Windows Migration tool" msgstr "Alat Migrasi Windows" #: standalone/drakbug:58 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:59 #, c-format msgid "Configuration Wizards" msgstr "Dukun Konfigurasi" #: standalone/drakbug:81 #, c-format msgid "Select Mandrakesoft Tool:" msgstr "" #: standalone/drakbug:82 #, c-format msgid "" "or Application Name\n" "(or Full Path):" msgstr "" #: standalone/drakbug:85 #, c-format msgid "Find Package" msgstr "Cari Paket" #: standalone/drakbug:87 #, c-format msgid "Package: " msgstr "Paket: " #: standalone/drakbug:88 #, c-format msgid "Kernel:" msgstr "Kernel:" #: standalone/drakbug:100 #, fuzzy, c-format msgid "" "To submit a bug report, click on the report button. \n" "This will open a web browser window on %s where you'll find a form to fill " "in. The information displayed above will be transferred to that server. \n" "Things useful to include in your report are the output of lspci, kernel " "version, and /proc/cpuinfo." msgstr "" "Klik tombol untuk mengirim laporan kutu.\n" "Ini akan membuka window browser web di %s\n" "dan akan ada formulir untuk diisi. Info yang tampil di atas akan\n" "ditransfer ke server tsb." #: standalone/drakbug:106 #, c-format msgid "Report" msgstr "Laporan" #: standalone/drakbug:163 #, c-format msgid "Not installed" msgstr "Tak terinstal" #: standalone/drakbug:175 #, c-format msgid "Package not installed" msgstr "Paket tak terinstal" #: standalone/drakclock:29 #, c-format msgid "DrakClock" msgstr "DrakClock" #: standalone/drakclock:39 #, fuzzy, c-format msgid "not defined" msgstr "tak dikonfigurasikan" #: standalone/drakclock:41 #, fuzzy, c-format msgid "Change Time Zone" msgstr "Zonawaktu" #: standalone/drakclock:45 #, c-format msgid "Timezone - DrakClock" msgstr "Zona waktu - DrakClock" #: standalone/drakclock:47 #, c-format msgid "GMT - DrakClock" msgstr "GMT - DrakClock" #: standalone/drakclock:47 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "Apakah jam hardware Anda merujuk ke GMT?" #: standalone/drakclock:75 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Antarmuka jaringan" #: standalone/drakclock:77 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:78 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "Restorasi Via Protokol Jaringan: %s" #: standalone/drakclock:86 #, c-format msgid "Server:" msgstr "Server:" #: standalone/drakclock:124 #, c-format msgid "Could not synchronize with %s." msgstr "" #: standalone/drakclock:146 standalone/drakclock:156 #, c-format msgid "Reset" msgstr "Reset" #: standalone/drakclock:224 #, fuzzy, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp?" msgstr "Paket %s perlu diupgrade. Anda ingin instal?" #: standalone/drakconnect:85 #, c-format msgid "Network configuration (%d adapters)" msgstr "Konfigurasi Jaringan (adapter %d)" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Gateway:" msgstr "Gateway:" #: standalone/drakconnect:96 standalone/drakconnect:786 #, c-format msgid "Interface:" msgstr "Antarmuka:" #: standalone/drakconnect:100 standalone/net_monitor:122 #, c-format msgid "Wait please" msgstr "Tunggu" #: standalone/drakconnect:116 #, c-format msgid "Interface" msgstr "Interface" #: standalone/drakconnect:116 standalone/printerdrake:211 #: standalone/printerdrake:218 #, c-format msgid "State" msgstr "Status" #: standalone/drakconnect:133 #, c-format msgid "Hostname: " msgstr "Nama Host: " #: standalone/drakconnect:135 #, fuzzy, c-format msgid "Configure hostname..." msgstr "Konfigurasi mouse" #: standalone/drakconnect:149 standalone/drakconnect:842 #, c-format msgid "LAN configuration" msgstr "konfigurasi LAN" #: standalone/drakconnect:154 #, c-format msgid "Configure Local Area Network..." msgstr "Konfigurasi Local Area Network..." #: standalone/drakconnect:162 standalone/drakconnect:246 #: standalone/drakconnect:250 #, c-format msgid "Apply" msgstr "Terapkan" #: standalone/drakconnect:197 #, c-format msgid "Manage connections" msgstr "Mengelola koneksi" #: standalone/drakconnect:224 #, fuzzy, c-format msgid "Device selected" msgstr "Hapus Pilihan" #: standalone/drakconnect:305 #, fuzzy, c-format msgid "IP configuration" msgstr "konfigurasi CUPS" #: standalone/drakconnect:344 #, fuzzy, c-format msgid "DNS servers" msgstr "Server DNS" #: standalone/drakconnect:352 #, fuzzy, c-format msgid "Search Domain" msgstr "Domain NIS" #: standalone/drakconnect:360 #, fuzzy, c-format msgid "static" msgstr "IP otomatis" #: standalone/drakconnect:360 #, c-format msgid "DHCP" msgstr "" #: standalone/drakconnect:470 #, fuzzy, c-format msgid "Metric" msgstr "batasi" #: standalone/drakconnect:493 #, c-format msgid "Flow control" msgstr "Alur kontrol" #: standalone/drakconnect:494 #, fuzzy, c-format msgid "Line termination" msgstr "Komputer Internet" #: standalone/drakconnect:505 #, fuzzy, c-format msgid "Modem timeout" msgstr "Timeout cangkang (shell)" #: standalone/drakconnect:509 #, fuzzy, c-format msgid "Use lock file" msgstr "Pilih file" #: standalone/drakconnect:511 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:514 #, fuzzy, c-format msgid "Busy wait" msgstr "Kuwait" #: standalone/drakconnect:519 #, fuzzy, c-format msgid "Modem sound" msgstr "Modem" #: standalone/drakconnect:520 #, fuzzy, c-format msgid "Enable" msgstr "aktifkan" #: standalone/drakconnect:520 #, fuzzy, c-format msgid "Disable" msgstr "matikan" #: standalone/drakconnect:571 standalone/harddrake2:48 #, c-format msgid "Media class" msgstr "Kelas media" #: standalone/drakconnect:572 standalone/drakfloppy:136 #, c-format msgid "Module name" msgstr "Nama modul" #: standalone/drakconnect:573 #, fuzzy, c-format msgid "Mac Address" msgstr "Alamat Siaran(Broadcast):" #: standalone/drakconnect:574 standalone/harddrake2:26 #: standalone/harddrake2:118 #, c-format msgid "Bus" msgstr "Bus" #: standalone/drakconnect:575 standalone/harddrake2:32 #, c-format msgid "Location on the bus" msgstr "Lokasi di bus" #: standalone/drakconnect:671 standalone/drakgw:247 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Tiada adapter jaringan ethernet terdeteksi. Jalankan konfigurator hardware." #: standalone/drakconnect:679 #, fuzzy, c-format msgid "Remove a network interface" msgstr "Pilih interface jaringan" #: standalone/drakconnect:683 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "Pilih interface jaringan" #: standalone/drakconnect:715 #, fuzzy, c-format msgid "" "An error occurred while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Problem terjadi saat restart jaringan:\n" "\n" "%s" #: standalone/drakconnect:716 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been successfully deleted" msgstr "" #: standalone/drakconnect:732 #, c-format msgid "No IP" msgstr "" #: standalone/drakconnect:733 #, fuzzy, c-format msgid "No Mask" msgstr "Mask Buruk" #: standalone/drakconnect:734 standalone/drakconnect:913 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:734 standalone/drakconnect:913 #, fuzzy, c-format msgid "down" msgstr "selesai" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Connected" msgstr "Tersambung" #: standalone/drakconnect:776 standalone/net_monitor:470 #, c-format msgid "Not connected" msgstr "Tak tersambung" #: standalone/drakconnect:778 #, c-format msgid "Disconnect..." msgstr "Koneksi diputus" #: standalone/drakconnect:778 #, c-format msgid "Connect..." msgstr "Sambungkan..." #: standalone/drakconnect:807 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "Awas, koneksi Internet lain terdeteksi, mungkin memakai jaringan Anda" #: standalone/drakconnect:838 #, fuzzy, c-format msgid "Deactivate now" msgstr "non-aktifkan sekarang" #: standalone/drakconnect:838 #, fuzzy, c-format msgid "Activate now" msgstr "aktifkan sekarang" #: standalone/drakconnect:846 #, c-format msgid "" "You do not have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Tiada antarmuka terkonfigurasi.\n" "Konfigurasikan dulu dg meng-klik 'Configure'" #: standalone/drakconnect:860 #, c-format msgid "LAN Configuration" msgstr "konfigurasi LAN" #: standalone/drakconnect:872 #, c-format msgid "Adapter %s: %s" msgstr "Adapter %s: %s" #: standalone/drakconnect:881 #, c-format msgid "Boot Protocol" msgstr "Protokol Boot" #: standalone/drakconnect:882 #, c-format msgid "Started on boot" msgstr "Dijalankan saat boot" #: standalone/drakconnect:918 #, fuzzy, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrakelinux Control Center" msgstr "" "Antarmuka ini belum dikonfigurasikan.\n" "Luncurkan dukun konfigurasi di window utama" #. -PO: here "Add Connection" should be translated the same was as in control-center #: standalone/drakconnect:973 standalone/net_applet:50 #, fuzzy, c-format msgid "" "You do not have any configured Internet connection.\n" "Run the \"%s\" assistant from the Mandrakelinux Control Center" msgstr "" "Antarmuka ini belum dikonfigurasikan.\n" "Luncurkan dukun konfigurasi di window utama" #: standalone/drakconnect:974 standalone/net_applet:51 #, c-format msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)" msgstr "Tentukan antarmuka jaringan baru (LAN, ISDN, ADSL, ...)" #: standalone/drakconnect:981 #, c-format msgid "Internet connection configuration" msgstr "konfigurasi koneksi Internet" #: standalone/drakconnect:999 #, fuzzy, c-format msgid "Third DNS server (optional)" msgstr "Server DNS Primer (boleh diisi/tidak)" #: standalone/drakconnect:1021 #, c-format msgid "Internet Connection Configuration" msgstr "konfigurasi koneksi Internet" #: standalone/drakconnect:1022 #, c-format msgid "Internet access" msgstr "Akses Internet" #: standalone/drakconnect:1024 standalone/net_monitor:101 #, c-format msgid "Connection type: " msgstr "Tipe koneksi" #: standalone/drakconnect:1027 #, c-format msgid "Status:" msgstr "Status:" #: standalone/drakedm:34 #, c-format msgid "GDM (GNOME Display Manager)" msgstr "" #: standalone/drakedm:35 #, c-format msgid "KDM (KDE Display Manager)" msgstr "" #: standalone/drakedm:36 #, c-format msgid "MdkKDM (Mandrakelinux Display Manager)" msgstr "" #: standalone/drakedm:37 #, fuzzy, c-format msgid "XDM (X Display Manager)" msgstr "Pilih manajer display" #: standalone/drakedm:55 #, c-format msgid "Choosing a display manager" msgstr "Pilih manajer display" #: standalone/drakedm:56 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "Manajer Display X11 memungkinkan Anda login dg Sistem Window X dan\n" "menjalankan banyak sesi X di komputer lokal secara bersamaan." #: standalone/drakedm:79 #, c-format msgid "The change is done, do you want to restart the dm service?" msgstr "Sudah diubah, start ulang servis dm?" #: standalone/drakedm:80 #, c-format msgid "" "You are going to close all running programs and lose your current session. " "Are you really sure that you want to restart the dm service?" msgstr "" #: standalone/drakfloppy:41 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:78 #, fuzzy, c-format msgid "Boot disk creation" msgstr "pembuatan bootdisk" #: standalone/drakfloppy:79 #, c-format msgid "General" msgstr "Umum" #: standalone/drakfloppy:82 standalone/harddrake2:145 #, c-format msgid "Device" msgstr "Divais" #: standalone/drakfloppy:88 #, fuzzy, c-format msgid "Kernel version" msgstr "versi kernel" #: standalone/drakfloppy:103 #, c-format msgid "Preferences" msgstr "Kesukaan" #: standalone/drakfloppy:117 #, c-format msgid "Advanced preferences" msgstr "Pilihan Lengkap" #: standalone/drakfloppy:136 #, c-format msgid "Size" msgstr "Ukuran" #: standalone/drakfloppy:139 #, fuzzy, c-format msgid "Mkinitrd optional arguments" msgstr "opsi argumen mkinitrd" #: standalone/drakfloppy:141 #, c-format msgid "force" msgstr "paksa" #: standalone/drakfloppy:142 #, c-format msgid "omit raid modules" msgstr "abaikan modul RAID" #: standalone/drakfloppy:143 #, c-format msgid "if needed" msgstr "jika perlu" #: standalone/drakfloppy:144 #, c-format msgid "omit scsi modules" msgstr "abaikan modul SCSI" #: standalone/drakfloppy:147 #, c-format msgid "Add a module" msgstr "tambah modul" #: standalone/drakfloppy:156 #, c-format msgid "Remove a module" msgstr "Hapus modul" #: standalone/drakfloppy:291 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Pastikan media ada di device %s" #: standalone/drakfloppy:297 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Media di device %s tidak ada atau write-protected.\n" "Masukkan satu." #: standalone/drakfloppy:300 #, c-format msgid "Unable to fork: %s" msgstr "Fork gagal: %s" #: standalone/drakfloppy:303 #, fuzzy, c-format msgid "Floppy creation completed" msgstr "Koneksi rampung." #: standalone/drakfloppy:303 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #. -PO: Do not alter the and tags #: standalone/drakfloppy:308 #, fuzzy, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Gagal tutup mkbootdisk dg baik: \n" " %s \n" " %s" #: standalone/drakfont:182 #, c-format msgid "Search installed fonts" msgstr "Cari font terinstal" #: standalone/drakfont:184 #, c-format msgid "Unselect fonts installed" msgstr "Tak pilih font yg sudah diinstal" #: standalone/drakfont:207 #, c-format msgid "parse all fonts" msgstr "baca semua font" #: standalone/drakfont:209 #, fuzzy, c-format msgid "No fonts found" msgstr "tiada font ditemukan" #: standalone/drakfont:217 standalone/drakfont:257 standalone/drakfont:324 #: standalone/drakfont:357 standalone/drakfont:365 standalone/drakfont:391 #: standalone/drakfont:409 standalone/drakfont:423 #, c-format msgid "done" msgstr "selesai" #: standalone/drakfont:222 #, fuzzy, c-format msgid "Could not find any font in your mounted partitions" msgstr "tak ditemukan font di partisi termount" #: standalone/drakfont:255 #, c-format msgid "Reselect correct fonts" msgstr "Pilih ulang font yg benar" #: standalone/drakfont:258 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "gagal temukan font.\n" #: standalone/drakfont:268 #, c-format msgid "Search for fonts in installed list" msgstr "Cari font di daftar instalasi" #: standalone/drakfont:293 #, c-format msgid "%s fonts conversion" msgstr "konversi font %s" #: standalone/drakfont:322 #, c-format msgid "Fonts copy" msgstr "Copy font" #: standalone/drakfont:325 #, c-format msgid "True Type fonts installation" msgstr "Instalasi font True Tupe" #: standalone/drakfont:332 #, c-format msgid "please wait during ttmkfdir..." msgstr "tunggu saat ttmkfdir..." #: standalone/drakfont:333 #, c-format msgid "True Type install done" msgstr "Instalasi True Type selesai" #: standalone/drakfont:339 standalone/drakfont:354 #, c-format msgid "type1inst building" msgstr "bangun type1inst" #: standalone/drakfont:348 #, c-format msgid "Ghostscript referencing" msgstr "referensi Ghostscript" #: standalone/drakfont:358 #, c-format msgid "Suppress Temporary Files" msgstr "Sembunyikan file temporer" #: standalone/drakfont:361 #, c-format msgid "Restart XFS" msgstr "Jalankan ulang XFS" #: standalone/drakfont:407 standalone/drakfont:417 #, c-format msgid "Suppress Fonts Files" msgstr "Sembunyikan File Font" #: standalone/drakfont:419 #, c-format msgid "xfs restart" msgstr "jalankan ulang xfs" #: standalone/drakfont:427 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di " "sistem Anda.\n" "\n" "-Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat " "membuat server X Anda hang." #: standalone/drakfont:476 standalone/drakfont:485 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:486 #, c-format msgid "Font List" msgstr "Daftaf Font" #: standalone/drakfont:492 #, c-format msgid "About" msgstr "Keterangan" #: standalone/drakfont:494 standalone/drakfont:692 standalone/drakfont:730 #, c-format msgid "Uninstall" msgstr "Uninstall" #: standalone/drakfont:495 #, c-format msgid "Import" msgstr "Impor" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakfont:513 #, c-format msgid "" "Copyright (C) 2001-2002 by Mandrakesoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:522 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" "Program ini gratis; Anda dapat menyebar ulang dan/atau mengubahnya\n" "sesuai Lisensi Publik Umum GNU dari Free Software Foundation; baik\n" "versi 2, atau yang lebih baru.\n" "\n" "Program ini disebar agar dapat digunakan, tapi TANPA GARANSI APAPUN; bahkan\n" "tanpa garansi sebagai implikasi DAGANG atau KELAYAKAN UNTUK KEGUNAAN\n" "TERTENTU. Info lebih lanjut ada di Lisensi Publik Umum GNU.\n" "\n" "Anda mestinya sudah menerima salinan Lisensi Publik Umum GNU dari program\n" "ini; jika tidak, tulis ke Free Software Foundation, Inc., \n" "59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" #: standalone/drakfont:538 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:557 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Pilih aplikasi yang mensupport font :" #: standalone/drakfont:558 #, fuzzy, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Sebelum menginstl font, Anda harus punya hak memakai dan menginstalnya di " "sistem Anda.\n" "\n" "-Anda dapat menginstal font dengan cara normal. Terkadang, font palsu dapat " "membuat server X Anda hang." #: standalone/drakfont:568 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:569 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:570 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:571 #, c-format msgid "Generic Printers" msgstr "Printer Generik" #: standalone/drakfont:587 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "Pilih file font atau direktori dan klik 'Tambah'" #: standalone/drakfont:588 #, c-format msgid "File Selection" msgstr "Pilihan File" #: standalone/drakfont:604 #, c-format msgid "You've not selected any font" msgstr "Anda belum memilih font" #: standalone/drakfont:657 #, fuzzy, c-format msgid "Import fonts" msgstr "Impor Font" #: standalone/drakfont:662 #, fuzzy, c-format msgid "Install fonts" msgstr "Buang Font" #: standalone/drakfont:697 #, c-format msgid "click here if you are sure." msgstr "klik di sini jika Anda yakin." #: standalone/drakfont:699 #, c-format msgid "here if no." msgstr "di sini jika tidak." #: standalone/drakfont:738 #, c-format msgid "Unselected All" msgstr "Semua tak dipilih" #: standalone/drakfont:741 #, c-format msgid "Selected All" msgstr "Semua Dipilih" #: standalone/drakfont:744 #, c-format msgid "Remove List" msgstr "Hapus Daftar" #: standalone/drakfont:755 standalone/drakfont:774 #, fuzzy, c-format msgid "Importing fonts" msgstr "Impor Font" #: standalone/drakfont:759 standalone/drakfont:779 #, c-format msgid "Initial tests" msgstr "Tes Awal" #: standalone/drakfont:760 #, c-format msgid "Copy fonts on your system" msgstr "Salin font di sistem Anda" #: standalone/drakfont:761 #, c-format msgid "Install & convert Fonts" msgstr "Instal & konversikan Font" #: standalone/drakfont:762 #, c-format msgid "Post Install" msgstr "Instalasi Akhir" #: standalone/drakfont:780 #, c-format msgid "Remove fonts on your system" msgstr "Hapus font di sistem Anda" #: standalone/drakfont:781 #, c-format msgid "Post Uninstall" msgstr "Un-Instalasi Akhir" #: standalone/drakgw:58 standalone/drakgw:191 #, c-format msgid "Internet Connection Sharing" msgstr "Pemakaian Bersama Koneksi Internet" #: standalone/drakgw:111 standalone/drakvpn:51 #, fuzzy, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Maaf, support hanya untuk kernel 2.4" #: standalone/drakgw:122 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Internet Connection Sharing masih dimatikan" #: standalone/drakgw:123 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Konfigurasi Sharing Koneksi Internet telah seleasi.\n" "Namun sekarang masih dimatikan.\n" "\n" "Apa yang ingin Anda lakukan?" #: standalone/drakgw:127 standalone/drakvpn:127 #, c-format msgid "enable" msgstr "aktifkan" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 #, c-format msgid "reconfigure" msgstr "konfigurasi ulang" #: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 #: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735 #, c-format msgid "dismiss" msgstr "tutup" #: standalone/drakgw:134 #, c-format msgid "Enabling servers..." msgstr "Server-server akan dinyalakan" #: standalone/drakgw:146 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Internet Connection Sharing sudah aktif" #: standalone/drakgw:149 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Pemakaian Bersama Koneksi Internet telah aktif" #: standalone/drakgw:150 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Konfigurasi Internet Connection Sharing telah seleasi.\n" "Namun sekarang sudah aktif.\n" "\n" "Apa yang ingin Anda lakukan?" #: standalone/drakgw:154 standalone/drakvpn:101 #, c-format msgid "disable" msgstr "matikan" #: standalone/drakgw:157 #, c-format msgid "Disabling servers..." msgstr "Server-server sedang dimatikan" #: standalone/drakgw:172 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Internet Connection Sharing telah dimatikan" #: standalone/drakgw:192 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Anda sedang membuat komputer Anda membagi koneksi Internetnya.\n" "Dengan cara ini, komputer lain di jaringan lokal dapat memakai koneksi " "Internet komputer ini.\n" "\n" "Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg " "drakconnect sebelum pergi lebih jauh.\n" "\n" "Catatan: Anda mesti punya Adapter Jaringan untuk mensetup Jaringan Area " "Lokal (LAN)." #: standalone/drakgw:236 #, c-format msgid "Interface %s (using module %s)" msgstr "Interface %s (pakai module %s)" #: standalone/drakgw:237 #, c-format msgid "Interface %s" msgstr "Antarmuka %s" #: standalone/drakgw:246 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "Tidak ada adaptor jaringan di sistem ini!" #: standalone/drakgw:253 #, c-format msgid "Network interface" msgstr "Antarmuka jaringan" #: standalone/drakgw:254 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Hanya ada satu adapter jaringan yang dikonfigurasikan di sistem ini:\n" "\n" "%s\n" "\n" "Apakah Anda mau melakukan setup Local Area Network untuk adapter itu?" #: standalone/drakgw:260 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Pilih interface jaringan" #: standalone/drakgw:261 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Silakan pilih adapter jaringan yang hendak disambung ke Local Area Network " "Anda." #: standalone/drakgw:290 #, c-format msgid "Network interface already configured" msgstr "Antarmuka network telah dikonfigurasi" #: standalone/drakgw:291 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Awas, adaptor network (%s) telah terkonfigurasikan.\n" "\n" "Anda ingin konfigurasi ulang otomatis?\n" "\n" "Anda dapat melakukannya secara manual tapi Anda perlu tahu yg Anda kerjakan." #: standalone/drakgw:296 #, c-format msgid "Automatic reconfiguration" msgstr "Konfigurasi ulang otomatis" #: standalone/drakgw:296 #, c-format msgid "No (experts only)" msgstr "Tidak (hanya ahli)" #: standalone/drakgw:297 #, c-format msgid "Show current interface configuration" msgstr "Tampilkan konfigurasi antarmuka" #: standalone/drakgw:298 #, c-format msgid "Current interface configuration" msgstr "Konfigurasi antarmuka kini" #: standalone/drakgw:299 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Konfigurasi `%s':\n" "\n" "Network: %s\n" "Alamat IP: %s\n" "Atribut IP: %s\n" "Driver: %s" #: standalone/drakgw:312 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Konfigurasi dapat tetap dipakai dengan anggapan Anda telah menset up server " "DHCP; tolong periksa apakah jaringan lokal Anda terbaca dengan benar; " "Konfigurasi ulang takkan dilakukan dan konfigurasi server DHCP takkan " "disentuh.\n" "\n" "Entri DNS standar adalah Caching Nameserver terkonfigurasi di tembok api. " "Anda dapat menggantinya dg IP DNS ISP, misalnya.\n" "\n" "Atau, antarmuka dan server DHCP dapat dikonfigurasikan (lagi).\n" "\n" #: standalone/drakgw:319 #, c-format msgid "Local Network adress" msgstr "Alamat Jaringan Lokal" #: standalone/drakgw:323 #, fuzzy, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you do not know the meaning of an option, simply leave it as it is." msgstr "" "Konfigurasi Server DHCP\n" "\n" "Di sini Anda dapat memilih opsi konfigurasi server DHCP.\n" "Jika Anda tak tahu arti opsi, tinggalkan apa adanya.\n" "\n" #: standalone/drakgw:327 #, c-format msgid "(This) DHCP Server IP" msgstr "IP Server DHCP (Ini)" #: standalone/drakgw:328 #, c-format msgid "The DNS Server IP" msgstr "IP Server DNS" #: standalone/drakgw:329 #, c-format msgid "The internal domain name" msgstr "Nama domain internal" #: standalone/drakgw:330 #, c-format msgid "The DHCP start range" msgstr "Kisar awal DHCP" #: standalone/drakgw:331 #, c-format msgid "The DHCP end range" msgstr "Kisar akhir DHCP" #: standalone/drakgw:332 #, c-format msgid "The default lease (in seconds)" msgstr "Lama peminjaman standar (dalam detik)" #: standalone/drakgw:333 #, c-format msgid "The maximum lease (in seconds)" msgstr "Lama peminjaman maksimum (dalam detik)" #: standalone/drakgw:334 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Konfigurasi ulang antarmuka dan server DHCP" #: standalone/drakgw:341 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "Jaringan Lokal tak berakhiran `.0', keluar." #: standalone/drakgw:351 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Ada potensi konflik alamat LAN pada konfigurasi %s!\n" #: standalone/drakgw:361 #, c-format msgid "Configuring..." msgstr "Konfigurasi..." #: standalone/drakgw:362 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Mengkonfigurasikan skrip, menginstall software, menjalankan server..." #: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278 #, c-format msgid "Problems installing package %s" msgstr "Problem instalasi paket %s" #: standalone/drakgw:598 #, fuzzy, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Semuanya sudah dikonfigurasikan.\n" "Anda sekarang bisa membagi koneksi Internet dengan komputer-komputer lain " "pada Local Area Network di tempat Anda, dengan menggunakan konfigurasi " "jaringan otomatis (DHCP)." #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 Mandrakesoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:36 #, fuzzy, c-format msgid "Mandrakelinux Help Center" msgstr "Pusat Kontrol Mandrake" #: standalone/drakhelp:36 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" "%s tak dapat ditampilkan\n" ". Tiada Pertolongan untuk entri tipe ini\n" #: standalone/drakperm:22 #, c-format msgid "System settings" msgstr "settingan Sistem" #: standalone/drakperm:23 #, c-format msgid "Custom settings" msgstr "Setting kebiasaan" #: standalone/drakperm:24 #, fuzzy, c-format msgid "Custom & system settings" msgstr "Setting kebiasaan" #: standalone/drakperm:44 #, c-format msgid "Editable" msgstr "Bisa diedit" #: standalone/drakperm:49 standalone/drakperm:321 #, c-format msgid "Path" msgstr "Path" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "User" msgstr "Pengguna" #: standalone/drakperm:49 standalone/drakperm:250 #, c-format msgid "Group" msgstr "Grup" #: standalone/drakperm:49 standalone/drakperm:333 #, c-format msgid "Permissions" msgstr "Izin" #: standalone/drakperm:107 #, fuzzy, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Drakperm digunakan untuk melihat file yg digunakan untuk membetulkan izin, " "pemilik, dan grup via msec.\n" "Anda dapat juga mengedit aturan Anda sendiri yang akan menindas aturan " "standar." #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Naik" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "Naikkan aturan terpilih satu level" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Turun" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "Turunkan aturan terpilih satu level" #: standalone/drakperm:123 #, c-format msgid "Add a rule" msgstr "Tambah aturan" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "Tambah aturan baru di akhir" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "Hapus aturan terpilih" #. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/drakperm:125 standalone/drakups:298 standalone/drakups:358 #: standalone/drakups:378 standalone/drakvpn:333 standalone/drakvpn:694 #: standalone/printerdrake:232 #, c-format msgid "Edit" msgstr "Edit" #: standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "Edit aturan saat ini" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "jelajah" #: standalone/drakperm:247 #, c-format msgid "user" msgstr "Pemakai" #: standalone/drakperm:247 #, c-format msgid "group" msgstr "kelompok" #: standalone/drakperm:247 #, c-format msgid "other" msgstr "lainnya" #: standalone/drakperm:252 #, c-format msgid "Read" msgstr "Baca" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:255 #, c-format msgid "Enable \"%s\" to read the file" msgstr "Izinkan \"%s\" membaca file" #: standalone/drakperm:259 #, c-format msgid "Write" msgstr "Tulis" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:262 #, c-format msgid "Enable \"%s\" to write the file" msgstr "Izinkan \"%s\" untuk menulis file" #: standalone/drakperm:266 #, c-format msgid "Execute" msgstr "Eksekusi" #. -PO: here %s will be either "user", "group" or "other" #: standalone/drakperm:269 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "Izinkan \"%s\" untuk eksekusi file" #: standalone/drakperm:272 #, c-format msgid "Sticky-bit" msgstr "Sticky-bit (bit-lengket)" #: standalone/drakperm:272 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Digunakan untuk direktori:\n" " hanya pemilik direktori atau file dalam direktori ini yg dapat menghapusnya" #: standalone/drakperm:273 #, c-format msgid "Set-UID" msgstr "Set-UID (ID Pengguna)" #: standalone/drakperm:273 #, c-format msgid "Use owner id for execution" msgstr "Gunakan id pemilik untuk eksekusi" #: standalone/drakperm:274 #, c-format msgid "Set-GID" msgstr "Set-GID (ID Grup)" #: standalone/drakperm:274 #, c-format msgid "Use group id for execution" msgstr "Gunakan id grup untuk eksekusi" #: standalone/drakperm:290 standalone/drakxtv:89 #, c-format msgid "User:" msgstr "Pengguna :" #: standalone/drakperm:292 #, c-format msgid "Group:" msgstr "Grup:" #: standalone/drakperm:296 #, c-format msgid "Current user" msgstr "Pengguna saat ini" #: standalone/drakperm:297 #, c-format msgid "When checked, owner and group will not be changed" msgstr "Jika dipilih, pemilik dan grup takkan diubah" #: standalone/drakperm:307 #, c-format msgid "Path selection" msgstr "Pilihan path" #: standalone/drakperm:327 #, c-format msgid "Property" msgstr "Properti" #: standalone/drakpxe:55 #, c-format msgid "PXE Server Configuration" msgstr "Konfigurasi Server PXE" #: standalone/drakpxe:111 #, c-format msgid "Installation Server Configuration" msgstr "Konfigurasi Server Instalasi" #: standalone/drakpxe:112 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Anda sedang akan melakukan instalasi server PXE sbg server DHCP dan server\n" "TFTP untuk membangun server instalasi. Dengan fitur tsb, komputer lain di\n" "jaringan lokal akan dpt diinstal menggunakan komputer ini sbg source-nya.\n" "Pastikan Anda telah mengkonfigurasikan akses Jaringan/Internet dg\n" "drakconnect sebelum pergi lebih jauh.\n" "\n" "Catatan: Anda mesti punya Adaptor Jaringan untuk mensetup Jaringan Area\n" "Lokal (LAN)." #: standalone/drakpxe:143 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "Pilihlah antarmuka jaringan yang akan digunakan sbg server DHCP." #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "Antarmuka %s (di jaringan %s)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "Server DHCP memungkinkan boot komputer lain dg PXE dalam kisar alamat yg " "diberikan.\n" "\n" "Alamat jaringan adalah %s dg netmask %s.\n" "\n" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "IP awal DHCP" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "IP akhir DHCP" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Tunjukkan tempat image instalasi akan ditaruh.\n" "\n" "Jika Anda tak punya direktori, copy-lah isi CD/DVD\n" "\n" #: standalone/drakpxe:192 #, c-format msgid "Installation image directory" msgstr "Direktori image instalasi" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "Image tak ditemukan" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Image CD atau DVD tak ditemukan, copy-lah program instalasi dan file rpm." #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Di mana file auto_install.cfg berada?\n" "\n" "Biarkan kosong jika tak ingin men-set up modus instalasi otomatis.\n" "\n" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "Lokasi file auto_install.cfg" #: standalone/draksec:49 #, c-format msgid "ALL" msgstr "SEMUA" #: standalone/draksec:50 #, c-format msgid "LOCAL" msgstr "LOKAL" #: standalone/draksec:53 #, c-format msgid "Ignore" msgstr "Abaikan" #. -PO: Do not alter the and tags. #. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words. #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX. #: standalone/draksec:101 #, fuzzy, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The 'Security Administrator' is the one who " "will receive security alerts if the\n" "'Security Alerts' option is set. It can be a " "username or an email.\n" "\n" "\n" "The 'Security Level' menu allows you to select " "one of the six preconfigured security levels\n" "provided with msec. These levels range from 'poor' security and ease of use, to\n" "'paranoid' config, suitable for very sensitive " "server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" "Setup tingkat keamanan dan administrator.\n" "\n" "\n" "Administrator Keamanan adalah penerima pemberitahuan keamanan jika\n" "opsi 'Pemberitahuan Keamanan' diset. Dapat berupa nama pengguna atau email.\n" "\n" "\n" "Menu Tingkat Keamanan memungkinkan pemilihan satu di antara enam tingkat\n" "keamanan yg disajikan msec. Level berkisar dari keamanan lemah (mudah " "dipakai)\n" "sampai level paranoid, cocok untuk aplikasi server yg amat sensitif:\n" "\n" "\n" "Lemah: Benar2 tak aman, tapi amat " "mudah\n" "dipakai. Harus hanya dipakai pada komputer yg tak terhubung dg jaringan " "manapun!\n" "\n" "\n" "Standar: Keamanan standar disarankan " "untuk\n" "komputer yg terhubung ke Internet sbg klien.\n" "\n" "\n" "Tinggi: Ada beberapa pembatasan, dan\n" "pengecekan otomatis dijalankan tiap malam.\n" "\n" "\n" "Lebih Tinggi: Cukup aman untuk " "menggunakan\n" "sistem sbg server yg dapat menerima koneksi dari banyak klien. Jika komputer " "Anda\n" "hanya klien Internet, pilihlah level lebih rendah.\n" "\n" "\n" "Paranoid: Mirip dg level sebelumnya, " "tapi\n" "sistem ditutup sepenuhnya dan fitur keamanan adalah maximum" #: standalone/draksec:154 standalone/harddrake2:202 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Penjelasan isian:\n" "\n" #: standalone/draksec:168 #, c-format msgid "(default value: %s)" msgstr "(nilai standar: %s)" #: standalone/draksec:210 #, c-format msgid "Security Level:" msgstr "Tingkat Keamanan:" #: standalone/draksec:217 #, c-format msgid "Security Administrator:" msgstr "Admin Keamanan:" #: standalone/draksec:219 #, c-format msgid "Basic options" msgstr "Opsi dasar" #: standalone/draksec:233 #, c-format msgid "Network Options" msgstr "Opsi Jaringan" #: standalone/draksec:233 #, c-format msgid "System Options" msgstr "Opsi Sistem" #: standalone/draksec:268 #, c-format msgid "Periodic Checks" msgstr "Cek Periodik" #: standalone/draksec:298 #, c-format msgid "Please wait, setting security level..." msgstr "Tunggu, tingkat keamanan sedang diset..." #: standalone/draksec:304 #, c-format msgid "Please wait, setting security options..." msgstr "Tunggu, opsi keamanan sedang diset..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Kartu Suara tak terdeteksi!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/draksound:50 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Kartu Suara tak terdeteksi. Pastikan Kartu Suara yg disupport Linux " "terhubung dengan benar.\n" "\n" "\n" "Kunjungi database divais keras di:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/draksound:57 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Catatan: jika Anda punya kartu suara PnP ISA, Anda harus menggunakan " "sndconfig. Ketikkan \"sndconfig\" di konsol." #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "paket 'ImageMagick' diperlukan agar kerja bisa dilakukan dg benar.\n" "Klik \"Ok\" untuk menginstal 'ImageMagick' atau \"Batal\" untuk keluar" #: standalone/draksplash:68 #, c-format msgid "first step creation" msgstr "pembuatan step pertama" #: standalone/draksplash:71 #, c-format msgid "final resolution" msgstr "resolusi akhir" #: standalone/draksplash:72 #, c-format msgid "choose image file" msgstr "pilih file image" #: standalone/draksplash:73 #, c-format msgid "Theme name" msgstr "Nama tema" #: standalone/draksplash:78 #, c-format msgid "Browse" msgstr "Jelajah" #: standalone/draksplash:93 standalone/draksplash:158 #, c-format msgid "Configure bootsplash picture" msgstr "Konfigurasi gambar bootsplash" #: standalone/draksplash:96 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "koordinat x kotak\n" "teks (jumlah huruf)" #: standalone/draksplash:97 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "koordinat x kotak\n" "teks (jumlah huruf)" #: standalone/draksplash:98 #, c-format msgid "text width" msgstr "lebar teks" #: standalone/draksplash:99 #, c-format msgid "text box height" msgstr "tinggi kotak teks" #: standalone/draksplash:100 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "koordinat x sudut kiri\n" "atas papan perkembangan" #: standalone/draksplash:101 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "koordinat y sudut kiri\n" "atas papan perkembangan" #: standalone/draksplash:102 #, c-format msgid "the width of the progress bar" msgstr "lebar papan perkembangan" #: standalone/draksplash:103 #, c-format msgid "the height of the progress bar" msgstr "tinggi papan perkembangan" #: standalone/draksplash:104 #, c-format msgid "the color of the progress bar" msgstr "warna papan perkembangan" #: standalone/draksplash:119 #, c-format msgid "Preview" msgstr "Prapandang" #: standalone/draksplash:121 #, c-format msgid "Save theme" msgstr "Simpan tema" #: standalone/draksplash:122 #, c-format msgid "Choose color" msgstr "Pilih warna" #: standalone/draksplash:125 #, c-format msgid "Display logo on Console" msgstr "Display logo di Konsol" #: standalone/draksplash:126 #, c-format msgid "Make kernel message quiet by default" msgstr "Matikan pesan kernel" #: standalone/draksplash:161 standalone/draksplash:309 #: standalone/draksplash:454 #, c-format msgid "Notice" msgstr "Catatan" #: standalone/draksplash:161 standalone/draksplash:309 #, c-format msgid "This theme does not yet have a bootsplash in %s!" msgstr "Tema ini belum punya bootsplash di %s !" #: standalone/draksplash:167 #, c-format msgid "choose image" msgstr "pilih image" #: standalone/draksplash:209 #, c-format msgid "saving Bootsplash theme..." msgstr "simpan tema Bootsplash..." #: standalone/draksplash:435 #, c-format msgid "ProgressBar color selection" msgstr "Pilihan warna ProgressBar" #: standalone/draksplash:454 #, c-format msgid "You must choose an image file first!" msgstr "Pilihlah file image!" #: standalone/draksplash:459 #, c-format msgid "Generating preview..." msgstr "Prapandang sedang dibuat ..." #. -PO: First %s is theme name, second %s (in parenthesis) is resolution #: standalone/draksplash:497 #, c-format msgid "%s BootSplash (%s) preview" msgstr "Prapandang Bootsplash %s (%s)" #. -PO: Do not alter the and tags #: standalone/draksplash:503 #, c-format msgid "" "The image \"%s\" cannot be load due to the following issue:\n" "\n" "%s" msgstr "" #: standalone/drakups:74 #, c-format msgid "Connected through a serial port or an usb cable" msgstr "" #: standalone/drakups:80 #, fuzzy, c-format msgid "Add an UPS device" msgstr "Tambah item" #: standalone/drakups:83 #, fuzzy, c-format msgid "" "Welcome to the UPS configuration utility.\n" "\n" "Here, you'll add a new UPS to your system.\n" msgstr "" "Selamat datang di konfigurator mail.\n" "\n" "Anda dapat mengeset sistem peringatan.\n" #: standalone/drakups:90 #, c-format msgid "" "We're going to add an UPS device.\n" "\n" "Do you want to autodetect UPS devices connected to this machine or to " "manually select them?" msgstr "" #: standalone/drakups:93 #, fuzzy, c-format msgid "Autodetection" msgstr "Deteksi otomatis" #: standalone/drakups:101 standalone/harddrake2:231 #, c-format msgid "Detection in progress" msgstr "Pendeteksian sedang berjalan" #: standalone/drakups:120 standalone/drakups:156 standalone/logdrake:449 #: standalone/logdrake:455 #, c-format msgid "Congratulations" msgstr "Selamat" #: standalone/drakups:121 #, c-format msgid "The wizard successfully added the following UPS devices:" msgstr "" #: standalone/drakups:123 #, fuzzy, c-format msgid "No new UPS devices was found" msgstr "Image tak ditemukan" #: standalone/drakups:128 standalone/drakups:140 #, fuzzy, c-format msgid "UPS driver configuration" msgstr "Konfigurasi printer CUPS" #: standalone/drakups:128 #, fuzzy, c-format msgid "Please select your UPS model." msgstr "Silakan tes mouse Anda:" #: standalone/drakups:129 #, fuzzy, c-format msgid "Manufacturer / Model:" msgstr "Pembuat, model printer" #: standalone/drakups:140 #, c-format msgid "" "We are configuring the \"%s\" UPS from \"%s\".\n" "Please fill in its name, its driver and its port." msgstr "" #: standalone/drakups:145 #, c-format msgid "Name:" msgstr "Nama:" #: standalone/drakups:145 #, fuzzy, c-format msgid "The name of your ups" msgstr "nama CPU" #: standalone/drakups:146 #, c-format msgid "The driver that manages your ups" msgstr "" #: standalone/drakups:147 #, c-format msgid "Port:" msgstr "Port:" #: standalone/drakups:149 #, fuzzy, c-format msgid "The port on which is connected your ups" msgstr "tipe bus tempat mouse dicolokkan" #: standalone/drakups:156 #, c-format msgid "The wizard successfully configured the new \"%s\" UPS device." msgstr "" #: standalone/drakups:246 #, fuzzy, c-format msgid "UPS devices" msgstr "Servis" #: standalone/drakups:247 standalone/drakups:266 standalone/drakups:282 #: standalone/harddrake2:83 standalone/harddrake2:109 #: standalone/harddrake2:116 #, c-format msgid "Name" msgstr "Nama" #: standalone/drakups:265 #, fuzzy, c-format msgid "UPS users" msgstr "Pengguna" #: standalone/drakups:281 #, fuzzy, c-format msgid "Access Control Lists" msgstr "akses ke peralatan jaringan" #: standalone/drakups:282 #, c-format msgid "IP mask" msgstr "" #: standalone/drakups:294 #, c-format msgid "Rules" msgstr "Peraturan" #: standalone/drakups:295 #, c-format msgid "Action" msgstr "Aksi" #: standalone/drakups:295 standalone/drakvpn:1146 standalone/harddrake2:80 #, c-format msgid "Level" msgstr "Level" #: standalone/drakups:295 #, fuzzy, c-format msgid "ACL name" msgstr "nama LVM?" #: standalone/drakups:325 standalone/drakups:329 standalone/drakups:338 #, fuzzy, c-format msgid "DrakUPS" msgstr "Dvorak (US)" #: standalone/drakups:335 #, fuzzy, c-format msgid "Welcome to the UPS configuration tools" msgstr "Tes konfigurasi" #: standalone/drakvpn:73 #, fuzzy, c-format msgid "DrakVPN" msgstr "Dvorak (US)" #: standalone/drakvpn:95 #, fuzzy, c-format msgid "The VPN connection is enabled." msgstr "Internet Connection Sharing sudah aktif" #: standalone/drakvpn:96 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Konfigurasi Internet Connection Sharing telah seleasi.\n" "Namun sekarang sudah aktif.\n" "\n" "Apa yang ingin Anda lakukan?" #: standalone/drakvpn:105 #, fuzzy, c-format msgid "Disabling VPN..." msgstr "Server-server sedang dimatikan" #: standalone/drakvpn:114 #, fuzzy, c-format msgid "The VPN connection is now disabled." msgstr "Internet Connection Sharing telah dimatikan" #: standalone/drakvpn:121 #, fuzzy, c-format msgid "VPN connection currently disabled" msgstr "Internet Connection Sharing masih dimatikan" #: standalone/drakvpn:122 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Konfigurasi Sharing Koneksi Internet telah seleasi.\n" "Namun sekarang masih dimatikan.\n" "\n" "Apa yang ingin Anda lakukan?" #: standalone/drakvpn:135 #, fuzzy, c-format msgid "Enabling VPN..." msgstr "Server-server akan dinyalakan" #: standalone/drakvpn:141 #, fuzzy, c-format msgid "The VPN connection is now enabled." msgstr "Internet Connection Sharing sudah aktif" #: standalone/drakvpn:155 standalone/drakvpn:183 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:156 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:184 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:196 #, fuzzy, c-format msgid "Kernel module." msgstr "Hapus modul" #: standalone/drakvpn:197 #, c-format msgid "" "The kernel needs to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:292 #, fuzzy, c-format msgid "Security Policies" msgstr "Pemberitahuan Keamanan:" #: standalone/drakvpn:292 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:295 standalone/drakvpn:306 #, fuzzy, c-format msgid "Configuration file" msgstr "Konfigurasi" #: standalone/drakvpn:296 #, c-format msgid "" "Configuration step!\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure?\n" msgstr "" #: standalone/drakvpn:307 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:325 standalone/drakvpn:685 #, fuzzy, c-format msgid "%s entries" msgstr ", %s sektor" #: standalone/drakvpn:326 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now:\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do?\n" msgstr "" #: standalone/drakvpn:333 standalone/drakvpn:694 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display" msgstr "harian" #: standalone/drakvpn:333 standalone/drakvpn:694 #, c-format msgid "Commit" msgstr "Commit" #: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 #: standalone/drakvpn:713 #, fuzzy, c-format msgid "" "_:display here is a verb\n" "Display configuration" msgstr "konfigurasi LAN" #: standalone/drakvpn:352 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:368 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:369 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton:\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "config setup" msgstr "konfigurasi ulang" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "conn %default" msgstr "standar" #: standalone/drakvpn:376 #, fuzzy, c-format msgid "normal conn" msgstr "Modus Normal" #: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510 #, fuzzy, c-format msgid "Exists!" msgstr "Keluar" #: standalone/drakvpn:383 standalone/drakvpn:424 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:400 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:405 #, fuzzy, c-format msgid "interfaces" msgstr "Interface" #: standalone/drakvpn:406 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:407 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:408 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:409 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:410 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:444 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If do not define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:451 #, fuzzy, c-format msgid "PFS" msgstr "HFS" #: standalone/drakvpn:452 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:453 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:454 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "left" msgstr "kiri" #: standalone/drakvpn:456 standalone/drakvpn:495 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:457 standalone/drakvpn:496 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:458 standalone/drakvpn:497 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:459 standalone/drakvpn:498 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:488 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:491 #, fuzzy, c-format msgid "section name" msgstr "Nama koneksi" #: standalone/drakvpn:492 #, fuzzy, c-format msgid "authby" msgstr "Path" #: standalone/drakvpn:493 #, fuzzy, c-format msgid "auto" msgstr "Pengarang:" #: standalone/drakvpn:499 #, c-format msgid "right" msgstr "kanan" #: standalone/drakvpn:500 #, fuzzy, c-format msgid "rightcert" msgstr "Lebih Kuat" #: standalone/drakvpn:501 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:502 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:503 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:511 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:543 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:576 standalone/drakvpn:826 #, fuzzy, c-format msgid "Edit section" msgstr "Pilihan path" #: standalone/drakvpn:577 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 #: standalone/drakvpn:877 #, fuzzy, c-format msgid "Section names" msgstr "Nama koneksi" #: standalone/drakvpn:590 #, fuzzy, c-format msgid "Can not edit!" msgstr "%s di %s tak tercari" #: standalone/drakvpn:591 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freeswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the opportunistic encryption.\n" msgstr "" #: standalone/drakvpn:600 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:611 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:624 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:645 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now edit a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:656 standalone/drakvpn:873 #, fuzzy, c-format msgid "Remove section" msgstr "Hapus Daftar" #: standalone/drakvpn:657 standalone/drakvpn:874 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:686 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now:\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:714 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:728 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:729 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton:\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "path" msgstr "Path" #: standalone/drakvpn:735 #, c-format msgid "remote" msgstr "remote" #: standalone/drakvpn:735 #, fuzzy, c-format msgid "sainfo" msgstr "Spanyol" #: standalone/drakvpn:743 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:746 #, fuzzy, c-format msgid "path type" msgstr "Ubah tipe" #: standalone/drakvpn:750 #, c-format msgid "" "path include path: specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file: specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path: racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion: include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File: Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:770 standalone/drakvpn:863 #, fuzzy, c-format msgid "real file" msgstr "Pilih file" #: standalone/drakvpn:793 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:810 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:827 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:838 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:847 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:855 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:862 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:903 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:923 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:924 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:941 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Protokol Eropa" #: standalone/drakvpn:942 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:956 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:957 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:974 #, fuzzy, c-format msgid "Sainfo destination protocol" msgstr "Alat Migrasi Windows" #: standalone/drakvpn:975 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples: \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:989 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:991 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of the following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:996 #, fuzzy, c-format msgid "Lifetime number" msgstr "nomor" #: standalone/drakvpn:997 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1013 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1015 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will not be proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples: \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1031 standalone/drakvpn:1116 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "otentikasi" #: standalone/drakvpn:1033 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "otentikasi" #: standalone/drakvpn:1035 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1036 #, fuzzy, c-format msgid "deflate" msgstr "standar" #: standalone/drakvpn:1043 #, c-format msgid "Remote" msgstr "Remote" #: standalone/drakvpn:1044 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples: \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1052 #, fuzzy, c-format msgid "Exchange mode" msgstr "mode dial" #: standalone/drakvpn:1054 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1060 #, fuzzy, c-format msgid "Generate policy" msgstr "Keamanan" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, c-format msgid "off" msgstr "" #: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090 #, fuzzy, c-format msgid "on" msgstr "Turun" #: standalone/drakvpn:1062 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1076 #, fuzzy, c-format msgid "Passive" msgstr "Palestina" #: standalone/drakvpn:1078 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1081 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1083 #, fuzzy, c-format msgid "My certfile" msgstr "Pilih file" #: standalone/drakvpn:1084 #, fuzzy, c-format msgid "Name of the certificate" msgstr "Nama Printer" #: standalone/drakvpn:1085 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1086 #, fuzzy, c-format msgid "Name of the private key" msgstr "Nama Printer" #: standalone/drakvpn:1087 #, fuzzy, c-format msgid "Peers certfile" msgstr "Pilih file" #: standalone/drakvpn:1088 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1089 #, fuzzy, c-format msgid "Verify cert" msgstr "amat bagus" #: standalone/drakvpn:1091 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1093 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1094 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, FQDN,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier FQDN string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples: \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1114 #, fuzzy, c-format msgid "Peers identifier" msgstr "Printer" #: standalone/drakvpn:1115 #, fuzzy, c-format msgid "Proposal" msgstr "Protokol" #: standalone/drakvpn:1117 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of the following: \n" "\n" "DES, 3DES, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1124 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1126 #, fuzzy, c-format msgid "DH group" msgstr "Grup" #: standalone/drakvpn:1133 #, c-format msgid "Command" msgstr "Perintah" #: standalone/drakvpn:1134 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1135 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1136 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Protokol Eropa" #: standalone/drakvpn:1136 standalone/drakvpn:1143 #, fuzzy, c-format msgid "any" msgstr "Mei" #: standalone/drakvpn:1138 #, c-format msgid "Flag" msgstr "Flag" #: standalone/drakvpn:1139 #, c-format msgid "Direction" msgstr "Arah" #: standalone/drakvpn:1140 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "ipsec" msgstr "Msec" #: standalone/drakvpn:1140 #, fuzzy, c-format msgid "discard" msgstr "telah dimatikan" #: standalone/drakvpn:1143 #, c-format msgid "Mode" msgstr "Mode" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "tunnel" msgstr "Kanal" #: standalone/drakvpn:1143 #, fuzzy, c-format msgid "transport" msgstr "dipancarkan" #: standalone/drakvpn:1145 #, fuzzy, c-format msgid "Source/destination" msgstr "Stasiunkerja" #: standalone/drakvpn:1146 #, c-format msgid "require" msgstr "" #: standalone/drakvpn:1146 #, c-format msgid "default" msgstr "standar" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "use" msgstr "Mouse" #: standalone/drakvpn:1146 #, fuzzy, c-format msgid "unique" msgstr "Martinique" #: standalone/drakxtv:45 #, c-format msgid "USA (broadcast)" msgstr "AS (siaran)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable)" msgstr "AS (kabel)" #: standalone/drakxtv:45 #, c-format msgid "USA (cable-hrc)" msgstr "AS (kabel-hrc)" #: standalone/drakxtv:45 #, c-format msgid "Canada (cable)" msgstr "Kanada (kabel)" #: standalone/drakxtv:46 #, c-format msgid "Japan (broadcast)" msgstr "Jepang (siaran)" #: standalone/drakxtv:46 #, c-format msgid "Japan (cable)" msgstr "Jepang (kabel)" #: standalone/drakxtv:46 #, c-format msgid "China (broadcast)" msgstr "Cina (siaran)" #: standalone/drakxtv:47 #, c-format msgid "West Europe" msgstr "Eropa Barat" #: standalone/drakxtv:47 #, c-format msgid "East Europe" msgstr "Eropa Timur" #: standalone/drakxtv:47 #, c-format msgid "France [SECAM]" msgstr "Perancis [SECAM]" #: standalone/drakxtv:48 #, c-format msgid "Newzealand" msgstr "Selandia Baru" #: standalone/drakxtv:51 #, c-format msgid "Australian Optus cable TV" msgstr "TV kabel Optus Australia" #: standalone/drakxtv:85 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Tolong,\n" "tuliskan standar dan daerah tv Anda" #: standalone/drakxtv:87 #, c-format msgid "TV norm:" msgstr "standar TV :" #: standalone/drakxtv:88 #, c-format msgid "Area:" msgstr "Area:" #: standalone/drakxtv:93 #, c-format msgid "Scanning for TV channels in progress..." msgstr "Kanal TV sedang di-scan ..." #: standalone/drakxtv:103 #, c-format msgid "Scanning for TV channels" msgstr "Men-scan kanal TV" #: standalone/drakxtv:107 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Ada error saat men-scan kanal TV" #: standalone/drakxtv:110 #, c-format msgid "Have a nice day!" msgstr "Daagh!" #: standalone/drakxtv:111 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Kini Anda dapat menjalankan xawtv di Window X\n" #: standalone/drakxtv:149 #, c-format msgid "No TV Card detected!" msgstr "Kartu TV tak terdeteksi!" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: standalone/drakxtv:151 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Kartu TV tak terdeteksi. Pastikan Kartu Video/TV yg disupport Linux " "terhubung dengan benar.\n" "\n" "\n" "Kunjungi database divais keras di:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/harddrake2:23 #, c-format msgid "Alternative drivers" msgstr "Driver alternatif" #: standalone/harddrake2:24 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "daftar driver alternatif untuk kartu suara ini" #: standalone/harddrake2:27 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "ini adalah bus fisik tempat alat tersambung (mis: PCI, USB, ...)" #: standalone/harddrake2:29 standalone/harddrake2:144 #, c-format msgid "Bus identification" msgstr "Identifikasi bus" #: standalone/harddrake2:30 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" "- Alat PCI dan USB: daftar id PCI/USB vendor, device, subvendor dan subdevice" #: standalone/harddrake2:33 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- alat pci : slot PCI, alat dan fungsi kartu ini\n" "- alat eide: alat adalah majikan atau budak\n" "- alat scsi: bus scsi dan id alat scsi" #: standalone/harddrake2:36 #, c-format msgid "Drive capacity" msgstr "Kapasitas drive" #: standalone/harddrake2:36 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "kapasitas khusus driver (kemampuan bakar dan/atau support DVD)" #: standalone/harddrake2:37 #, c-format msgid "this field describes the device" msgstr "penjelasan device" #: standalone/harddrake2:38 #, c-format msgid "Old device file" msgstr "File device lama" #: standalone/harddrake2:39 #, c-format msgid "old static device name used in dev package" msgstr "nama alat statis lama yg dipakai di paket dev" #: standalone/harddrake2:40 #, c-format msgid "New devfs device" msgstr "Device devfs baru" #: standalone/harddrake2:41 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "nama device dinamik baru yg dihasilkan oleh devfs kernel core" #. -PO: here "module" is the "jargon term" for a kernel driver #: standalone/harddrake2:44 #, c-format msgid "Module" msgstr "Modul" #: standalone/harddrake2:44 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "modul kernel GNU/Linux yang menangani alat tersebut" #: standalone/harddrake2:45 #, fuzzy, c-format msgid "Extended partitions" msgstr "Membuat partisi baru" #: standalone/harddrake2:45 #, fuzzy, c-format msgid "the number of extended partitions" msgstr "nomor prosesor" #: standalone/harddrake2:46 #, c-format msgid "Geometry" msgstr "Geometri" #: standalone/harddrake2:46 #, c-format msgid "Cylinder/head/sectors geometry of the disk" msgstr "" #: standalone/harddrake2:47 #, fuzzy, c-format msgid "Disk controller" msgstr "Pengontrol SMBus" #: standalone/harddrake2:47 #, c-format msgid "the disk controller on the host side" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "class of hardware device" msgstr "kelas alat hardware" #: standalone/harddrake2:49 standalone/harddrake2:81 #: standalone/printerdrake:211 #, c-format msgid "Model" msgstr "Model" #: standalone/harddrake2:49 #, c-format msgid "hard disk model" msgstr "model harddisk" #: standalone/harddrake2:50 #, c-format msgid "network printer port" msgstr "port printer jaringan" #: standalone/harddrake2:51 #, fuzzy, c-format msgid "Primary partitions" msgstr "Melakukan format partisi" #: standalone/harddrake2:51 #, fuzzy, c-format msgid "the number of the primary partitions" msgstr "nomor prosesor" #: standalone/harddrake2:52 #, c-format msgid "the vendor name of the device" msgstr "nama pembuat device" #: standalone/harddrake2:53 #, c-format msgid "Bus PCI #" msgstr "" #: standalone/harddrake2:53 #, fuzzy, c-format msgid "the PCI bus on which the device is plugged" msgstr "ini adalah bus fisik tempat alat tersambung (mis: PCI, USB, ...)" #: standalone/harddrake2:54 #, fuzzy, c-format msgid "PCI device #" msgstr "Servis" #: standalone/harddrake2:54 #, fuzzy, c-format msgid "PCI device number" msgstr "nomor" #: standalone/harddrake2:55 #, c-format msgid "PCI function #" msgstr "" #: standalone/harddrake2:55 #, fuzzy, c-format msgid "PCI function number" msgstr "Nama koneksi" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "Vendor ID" msgstr "Pembuat" #: standalone/harddrake2:56 #, c-format msgid "this is the standard numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "Device ID" msgstr "Device: " #: standalone/harddrake2:57 #, fuzzy, c-format msgid "this is the numerical identifier of the device" msgstr "nama pembuat device" #: standalone/harddrake2:58 #, c-format msgid "Sub vendor ID" msgstr "" #: standalone/harddrake2:58 #, c-format msgid "this is the minor numerical identifier of the vendor" msgstr "" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "Sub device ID" msgstr "Servis" #: standalone/harddrake2:59 #, fuzzy, c-format msgid "this is the minor numerical identifier of the device" msgstr "nama pembuat device" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "Device USB ID" msgstr "Device: " #: standalone/harddrake2:60 #, c-format msgid ".." msgstr "" #: standalone/harddrake2:64 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:64 #, fuzzy, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" "Kernel GNU/Linux melakukan loop kalkulasi saat boot untuk memulai penghitung " "timer. Hasilnya disimpan dlm bogomips sbg salah satu \"benchmark\" cpu." #: standalone/harddrake2:65 #, c-format msgid "Cache size" msgstr "Ukuran cache" #: standalone/harddrake2:65 #, c-format msgid "size of the (second level) cpu cache" msgstr "ukuran cache cpu (level kedua)" #. -PO: here "comas" is the medical coma, not the lexical coma!! #: standalone/harddrake2:68 #, c-format msgid "Coma bug" msgstr "Kutu Coma" #: standalone/harddrake2:68 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "apakah cpu ini punya kutu Coma 6x86 Cyrix" #: standalone/harddrake2:69 #, c-format msgid "Cpuid family" msgstr "Keluarga cpuid" #: standalone/harddrake2:69 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "keluarga cpu (mis: 6 untuk kelas i686)" #: standalone/harddrake2:70 #, c-format msgid "Cpuid level" msgstr "Tingkat cpuid" #: standalone/harddrake2:70 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "tingkat info yg didapat dg perintah cpuid" #: standalone/harddrake2:71 #, c-format msgid "Frequency (MHz)" msgstr "Frekuensi (MHz)" #: standalone/harddrake2:71 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" "Frekuensi CPU dlm MHz (jumlah instruksi perdetik yg dapat dieksekusi oleh " "CPU)" #: standalone/harddrake2:72 #, c-format msgid "Flags" msgstr "Flag" #: standalone/harddrake2:72 #, c-format msgid "CPU flags reported by the kernel" msgstr "Flag CPU yg dilaporkan oleh kernel" #: standalone/harddrake2:73 #, c-format msgid "Fdiv bug" msgstr "Kutu FDIV" #: standalone/harddrake2:74 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" "Chip Pentium Intel awal punya kutu di prosesor titik ambangnya shg saat " "melakukan pembagian titik ambang (FDIV) ia takkan mencapai presisi yg " "dibutuhkan" #: standalone/harddrake2:75 #, c-format msgid "Is FPU present" msgstr "apakah ada FPU" #: standalone/harddrake2:75 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "ya artinya prosesor punya koprosesor aritmetik" #: standalone/harddrake2:76 #, c-format msgid "Whether the FPU has an irq vector" msgstr "Apakah FPU punya vektor irq" #: standalone/harddrake2:76 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "ya artinya koprosesor aritmetik punya vektor eksepsi" #: standalone/harddrake2:77 #, c-format msgid "F00f bug" msgstr "Kutu F00F" #: standalone/harddrake2:77 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "pentium lama penuh kesalahan dan beku bila men-decode kode byte F00F" #: standalone/harddrake2:78 #, c-format msgid "Halt bug" msgstr "Kutu halt" #: standalone/harddrake2:79 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" "Beberapa chip i486DX-100 tak dapat kembali ke mode operasi setelah perintah " "\"halt\" digunakan" #: standalone/harddrake2:80 #, c-format msgid "sub generation of the cpu" msgstr "subgenerasi cpu" #: standalone/harddrake2:81 #, c-format msgid "generation of the cpu (eg: 8 for Pentium III, ...)" msgstr "generasi cpu (mis: 8 untuk Pentium III, ...)" #: standalone/harddrake2:82 #, c-format msgid "Model name" msgstr "Nama model" #: standalone/harddrake2:82 #, c-format msgid "official vendor name of the cpu" msgstr "nama vendor resmi cpu" #: standalone/harddrake2:83 #, c-format msgid "the name of the CPU" msgstr "nama CPU" #: standalone/harddrake2:84 #, c-format msgid "Processor ID" msgstr "ID prosesor" #: standalone/harddrake2:84 #, c-format msgid "the number of the processor" msgstr "nomor prosesor" #: standalone/harddrake2:85 #, c-format msgid "Model stepping" msgstr "Stepping model" #: standalone/harddrake2:85 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "stepping cpu (nomor submodel (generasi))" #: standalone/harddrake2:86 #, c-format msgid "the vendor name of the processor" msgstr "nama vendor prosesor" #: standalone/harddrake2:87 #, c-format msgid "Write protection" msgstr "Proteksi penulisan" #: standalone/harddrake2:87 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write protection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" "Flag WP di register CR0 cpu memaksakan proteksi penulisan pada level halaman " "memori, shg memungkinkan prosesor mencegah akses kernel ke memori pengguna " "yg tak dicek (ini adalah penjaga bug)" #: standalone/harddrake2:91 #, c-format msgid "Floppy format" msgstr "Format disket" #: standalone/harddrake2:91 #, fuzzy, c-format msgid "format of floppies supported by the drive" msgstr "Format disket yg di-support oleh drive" #: standalone/harddrake2:95 #, c-format msgid "Channel" msgstr "Kanal" #: standalone/harddrake2:95 #, c-format msgid "EIDE/SCSI channel" msgstr "Kanal EIDE/SCSI" #: standalone/harddrake2:96 #, fuzzy, c-format msgid "Disk identifier" msgstr "Printer" #: standalone/harddrake2:96 #, c-format msgid "usually the disk serial number" msgstr "" #: standalone/harddrake2:97 #, fuzzy, c-format msgid "Logical unit number" msgstr "Nama volume lojik " #: standalone/harddrake2:97 #, c-format msgid "" "the SCSI target number (LUN). SCSI devices connected to a host are uniquely " "identified by a\n" "channel number, a target id and a logical unit number" msgstr "" #. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...) #: standalone/harddrake2:104 #, fuzzy, c-format msgid "Installed size" msgstr "Instal sistem" #: standalone/harddrake2:104 #, c-format msgid "Installed size of the memory bank" msgstr "" #: standalone/harddrake2:105 #, fuzzy, c-format msgid "Enabled Size" msgstr "aktifkan" #: standalone/harddrake2:105 #, c-format msgid "Enabled size of the memory bank" msgstr "" #: standalone/harddrake2:106 #, fuzzy, c-format msgid "type of the memory device" msgstr "nama pembuat device" #: standalone/harddrake2:107 #, c-format msgid "Speed" msgstr "Kecepatan" #: standalone/harddrake2:107 #, c-format msgid "Speed of the memory bank" msgstr "" #: standalone/harddrake2:108 #, fuzzy, c-format msgid "Bank connections" msgstr "Konfigurasi jaringan kabel" #: standalone/harddrake2:109 #, c-format msgid "Socket designation of the memory bank" msgstr "" #: standalone/harddrake2:113 #, fuzzy, c-format msgid "Device file" msgstr "File device lama" #: standalone/harddrake2:113 #, c-format msgid "" "the device file used to communicate with the kernel driver for the mouse" msgstr "" #: standalone/harddrake2:114 #, c-format msgid "Emulated wheel" msgstr "" #: standalone/harddrake2:114 #, fuzzy, c-format msgid "whether the wheel is emulated or not" msgstr "Emulasi tombol" #: standalone/harddrake2:115 #, fuzzy, c-format msgid "the type of the mouse" msgstr "Silakan tes mouse Anda" #: standalone/harddrake2:116 #, fuzzy, c-format msgid "the name of the mouse" msgstr "nama CPU" #: standalone/harddrake2:117 #, c-format msgid "Number of buttons" msgstr "Jumlah tombol" #: standalone/harddrake2:117 #, c-format msgid "the number of buttons the mouse has" msgstr "jumlah tombol mouse" #: standalone/harddrake2:118 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "tipe bus tempat mouse dicolokkan" #: standalone/harddrake2:119 #, c-format msgid "Mouse protocol used by X11" msgstr "" #: standalone/harddrake2:119 #, c-format msgid "the protocol that the graphical desktop use with the mouse" msgstr "" #: standalone/harddrake2:126 standalone/harddrake2:135 #: standalone/harddrake2:142 standalone/harddrake2:150 #: standalone/harddrake2:316 #, fuzzy, c-format msgid "Identification" msgstr "Identifikasi bus" #: standalone/harddrake2:127 standalone/harddrake2:143 #, c-format msgid "Connection" msgstr "Koneksi" #: standalone/harddrake2:136 #, fuzzy, c-format msgid "Performances" msgstr "Kesukaan" #: standalone/harddrake2:137 #, fuzzy, c-format msgid "Bugs" msgstr "Bus" #: standalone/harddrake2:138 #, c-format msgid "FPU" msgstr "" #: standalone/harddrake2:146 #, c-format msgid "Partitions" msgstr "Partisi" #: standalone/harddrake2:151 #, c-format msgid "Features" msgstr "" #. -PO: please keep all "/" characters !!! #: standalone/harddrake2:174 standalone/logdrake:77 #: standalone/printerdrake:134 standalone/printerdrake:147 #, c-format msgid "/_Options" msgstr "/_Pilihan" #: standalone/harddrake2:175 standalone/harddrake2:197 standalone/logdrake:79 #: standalone/printerdrake:159 standalone/printerdrake:161 #: standalone/printerdrake:164 standalone/printerdrake:166 #, c-format msgid "/_Help" msgstr "/_Tolong" #: standalone/harddrake2:179 #, c-format msgid "/Autodetect _printers" msgstr "/Deteksi otomatis _printer" #: standalone/harddrake2:180 #, c-format msgid "/Autodetect _modems" msgstr "/Deteksi otomatis _modem" #: standalone/harddrake2:181 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Deteksi otomatis drive _jaz" #: standalone/harddrake2:188 #, c-format msgid "/_Upload the hardware list" msgstr "" #: standalone/harddrake2:188 standalone/printerdrake:140 #, c-format msgid "/_Quit" msgstr "/_Keluar" #: standalone/harddrake2:199 #, c-format msgid "/_Fields description" msgstr "/Penjelasan _Field" #: standalone/harddrake2:201 #, c-format msgid "Harddrake help" msgstr "Pertolongan Harddrake" #: standalone/harddrake2:210 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Sekali memilih device, Anda akan dapat melihat info-nya di frame kanan " "(\"Info\")" #: standalone/harddrake2:216 standalone/printerdrake:164 #, c-format msgid "/_Report Bug" msgstr "/_Laporan Bug" #: standalone/harddrake2:218 standalone/printerdrake:166 #, c-format msgid "/_About..." msgstr "/_About..." #: standalone/harddrake2:219 #, c-format msgid "About Harddrake" msgstr "Tentang Harddrake" #. -PO: Do not alter the and tags #: standalone/harddrake2:221 #, fuzzy, c-format msgid "" "This is HardDrake, a %s hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Inilah HardDrake, alat konfigurasi hardware Mandrakelinux.\n" "Versi: %s\n" "Pengarang: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" #: standalone/harddrake2:238 #, fuzzy, c-format msgid "Harddrake2" msgstr "HardDrake" #: standalone/harddrake2:253 #, c-format msgid "Detected hardware" msgstr "Hardware terdeteksi" #: standalone/harddrake2:258 #, c-format msgid "Configure module" msgstr "Konfigurasi modul" #: standalone/harddrake2:265 #, c-format msgid "Run config tool" msgstr "Jalankan alat konfigurasi" #: standalone/harddrake2:303 standalone/net_monitor:108 #: standalone/net_monitor:109 standalone/net_monitor:114 #, c-format msgid "unknown" msgstr "tak dikenal" #: standalone/harddrake2:304 standalone/printerdrake:298 #: standalone/printerdrake:336 #, c-format msgid "Unknown" msgstr "Tak dikenal" #: standalone/harddrake2:324 #, c-format msgid "Misc" msgstr "Misc" #: standalone/harddrake2:339 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "Klik device di pohon kiri untuk menampilkan info-nya di sini." #: standalone/harddrake2:391 #, c-format msgid "secondary" msgstr "sekunder" #: standalone/harddrake2:391 #, c-format msgid "primary" msgstr "primer" #: standalone/harddrake2:395 #, fuzzy, c-format msgid "burner" msgstr "Printer" #: standalone/harddrake2:395 #, c-format msgid "DVD" msgstr "DVD" #: standalone/harddrake2:525 #, c-format msgid "Upload the hardware list" msgstr "" #: standalone/harddrake2:530 #, fuzzy, c-format msgid "Account:" msgstr "Mount" #: standalone/harddrake2:531 #, c-format msgid "Password:" msgstr "Password:" #: standalone/harddrake2:532 #, c-format msgid "Hostname:" msgstr "Namahost:" #: standalone/keyboarddrake:29 #, c-format msgid "Please, choose your keyboard layout." msgstr "Pilih papanketik Anda" #: standalone/keyboarddrake:45 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Ingin membuat tombol BackSpace menjadi Delete dalam konsol?" #: standalone/localedrake:38 #, c-format msgid "LocaleDrake" msgstr "LocaleDrake" #: standalone/localedrake:67 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "Perubahan telah dilakukan, Anda harus logout agar perubahan berlaku" #: standalone/logdrake:50 #, fuzzy, c-format msgid "Mandrakelinux Tools Logs" msgstr "Penjelasan Piranti Mandrake" #: standalone/logdrake:51 #, fuzzy, c-format msgid "Logdrake" msgstr "logdrake" #: standalone/logdrake:64 #, c-format msgid "Show only for the selected day" msgstr "Tampilkan hari terpilih saja" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/File/B_aru" #: standalone/logdrake:71 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/File/_Buka" #: standalone/logdrake:72 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "/File/_Simpan" #: standalone/logdrake:73 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/File/Simpan _Dengan nama lain" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/File/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/Pilihan/Test" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/Help/_About..." #: standalone/logdrake:109 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:110 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:111 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:116 #, c-format msgid "search" msgstr "cari" #: standalone/logdrake:128 #, c-format msgid "A tool to monitor your logs" msgstr "Penampil log Anda" #: standalone/logdrake:129 standalone/net_monitor:99 #, c-format msgid "Settings" msgstr "Setting" #: standalone/logdrake:134 #, c-format msgid "Matching" msgstr "Pencocokan" #: standalone/logdrake:135 #, c-format msgid "but not matching" msgstr "tapi bukan pencocokan" #: standalone/logdrake:139 #, c-format msgid "Choose file" msgstr "Pilih file" #: standalone/logdrake:148 #, c-format msgid "Calendar" msgstr "Kalender" #: standalone/logdrake:158 #, c-format msgid "Content of the file" msgstr "Isi file" #: standalone/logdrake:162 standalone/logdrake:399 #, c-format msgid "Mail alert" msgstr "Pemberitahuan Mail" #: standalone/logdrake:169 #, c-format msgid "The alert wizard has failed unexpectedly:" msgstr "" #: standalone/logdrake:221 #, c-format msgid "please wait, parsing file: %s" msgstr "tunggu, sedang menelaah file: %s" #: standalone/logdrake:376 #, c-format msgid "Apache World Wide Web Server" msgstr "Server WWW Apache" #: standalone/logdrake:377 #, c-format msgid "Domain Name Resolver" msgstr "Perumus Nama Domain" #: standalone/logdrake:378 #, c-format msgid "Ftp Server" msgstr "Server FTP" #: standalone/logdrake:379 #, c-format msgid "Postfix Mail Server" msgstr "Server Mail Postfix" #: standalone/logdrake:380 #, c-format msgid "Samba Server" msgstr "Server Samba" #: standalone/logdrake:382 #, c-format msgid "Webmin Service" msgstr "Servis Webmin" #: standalone/logdrake:383 #, c-format msgid "Xinetd Service" msgstr "Server Xinetd" #: standalone/logdrake:394 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "Ubah sistem cetak" #: standalone/logdrake:395 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:402 #, c-format msgid "Mail alert configuration" msgstr "Konfigurasi peringatan Mail" #: standalone/logdrake:403 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Selamat datang di konfigurator mail.\n" "\n" "Anda dapat mengeset sistem peringatan.\n" #: standalone/logdrake:406 #, fuzzy, c-format msgid "What do you want to do?" msgstr "%s akan dimount ke mana?" #: standalone/logdrake:413 #, fuzzy, c-format msgid "Services settings" msgstr "setting servis" #: standalone/logdrake:414 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "Anda akan diingatkan bila salah satu servis terhenti" #: standalone/logdrake:421 #, fuzzy, c-format msgid "Load setting" msgstr "setting muatan" #: standalone/logdrake:422 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "Anda akan diperingatkan jika muatan lebih tinggi daripada nilai ini" #: standalone/logdrake:423 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:428 #, fuzzy, c-format msgid "Alert configuration" msgstr "konfigurasi peringatan" #: standalone/logdrake:429 #, c-format msgid "Please enter your email address below " msgstr "Masukkan alamat email Anda di bawah " #: standalone/logdrake:430 #, fuzzy, c-format msgid "and enter the name (or the IP) of the SMTP server you wish to use" msgstr "Masukkan alamat IP dan port host yg ingin Anda pakai printernya." #: standalone/logdrake:449 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:455 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:514 #, c-format msgid "Save as.." msgstr "Simpan sbg.." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Pilih tipe mouse Anda." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Emulasikan tombol ketiga?" #: standalone/mousedrake:61 #, c-format msgid "Mouse test" msgstr "Tes Mouse" #: standalone/mousedrake:64 #, c-format msgid "Please test your mouse:" msgstr "Silakan tes mouse Anda:" #: standalone/net_applet:34 #, fuzzy, c-format msgid "Network is up on interface %s" msgstr "Antarmuka jaringan" #. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below #: standalone/net_applet:42 #, fuzzy, c-format msgid "Network is down on interface %s. Click on \"Configure Network\"" msgstr "Fungsi network tak dikonfigurasi" #: standalone/net_applet:57 standalone/net_monitor:473 #, c-format msgid "Connect %s" msgstr "Sambung %s" #: standalone/net_applet:58 standalone/net_monitor:473 #, c-format msgid "Disconnect %s" msgstr "Putus %s" #: standalone/net_applet:59 #, fuzzy, c-format msgid "Monitor Network" msgstr "Restorasi Via Jaringan" #: standalone/net_applet:60 #, c-format msgid "Configure Network" msgstr "Konfigurasikan Jaringan" #: standalone/net_applet:69 #, fuzzy, c-format msgid "Watched interface" msgstr "Interface" #: standalone/net_applet:78 #, c-format msgid "Profiles" msgstr "Profil" #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/net_applet:61 standalone/printerdrake:238 #, c-format msgid "Refresh" msgstr "Penyegaran" #: standalone/net_applet:62 #, c-format msgid "Get Online Help" msgstr "" #: standalone/net_applet:177 #, fuzzy, c-format msgid "Interactive intrusion detection" msgstr "Penggambar fungsi interaktif" #: standalone/net_applet:181 #, c-format msgid "Always launch on startup" msgstr "Selalu jalankan ketika pembukaan" #: standalone/net_applet:230 #, c-format msgid "A port scanning attack has been attempted by %s." msgstr "" #: standalone/net_applet:231 #, c-format msgid "The %s service has been attacked by %s." msgstr "" #: standalone/net_applet:232 #, c-format msgid "A password cracking attack has been attempted by %s." msgstr "" #: standalone/net_applet:240 #, fuzzy, c-format msgid "Active Firewall: intrusion detected" msgstr "Konfigurasi firewall terdeteksi!" #: standalone/net_applet:251 #, fuzzy, c-format msgid "Do you want to blacklist the attacker?" msgstr "Aktifkan fasilitas Tombol Lekat?" #: standalone/net_applet:265 #, c-format msgid "Always blacklist (do not ask again)" msgstr "" #: standalone/net_applet:268 #, fuzzy, c-format msgid "Attack details" msgstr "Tanpa Detil" #: standalone/net_applet:272 #, fuzzy, c-format msgid "Attack time: %s" msgstr "Kegiatan: %s" #: standalone/net_applet:273 #, fuzzy, c-format msgid "Network interface: %s" msgstr "Antarmuka jaringan" #: standalone/net_applet:274 #, fuzzy, c-format msgid "Attack type: %s" msgstr "tipe: %s" #: standalone/net_applet:275 #, fuzzy, c-format msgid "Protocol: %s" msgstr "Protokol" #: standalone/net_applet:276 #, fuzzy, c-format msgid "Attacker IP address: %s" msgstr "Alamat IP Terendah:" #: standalone/net_applet:277 #, fuzzy, c-format msgid "Attacker hostname: %s" msgstr "Setting nama host %s: " #: standalone/net_applet:278 #, fuzzy, c-format msgid "Service attacked: %s" msgstr "_Jenis layanan:" #: standalone/net_applet:279 #, fuzzy, c-format msgid "Port attacked: %s" msgstr "Port: %s" #: standalone/net_applet:280 #, c-format msgid "Type of ICMP attack: %s" msgstr "" #: standalone/net_monitor:61 standalone/net_monitor:66 #, c-format msgid "Network Monitoring" msgstr "Pemantauan Jaringan" #: standalone/net_monitor:104 #, fuzzy, c-format msgid "Global statistics" msgstr "Statistik" #: standalone/net_monitor:107 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:107 #, c-format msgid "Average" msgstr "Rata-rata" #: standalone/net_monitor:108 #, fuzzy, c-format msgid "" "Sending\n" "speed:" msgstr "Laju Pengiriman:" #: standalone/net_monitor:109 #, fuzzy, c-format msgid "" "Receiving\n" "speed:" msgstr "Laju Penerimaan:" #: standalone/net_monitor:113 #, fuzzy, c-format msgid "" "Connection\n" "time: " msgstr "Waktu Koneksi:" #: standalone/net_monitor:120 #, c-format msgid "Use same scale for received and transmitted" msgstr "" #: standalone/net_monitor:139 #, c-format msgid "Wait please, testing your connection..." msgstr "Tes koneksi Anda..." #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Disconnecting from Internet " msgstr "Pemutusan hubungan dari Internet " #: standalone/net_monitor:188 standalone/net_monitor:201 #, c-format msgid "Connecting to Internet " msgstr "Penghubungan ke Internet " #: standalone/net_monitor:232 #, c-format msgid "Disconnection from Internet failed." msgstr "Pemutusan hubungan dari Internet gagal." #: standalone/net_monitor:233 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "Pemutusan hubungan dari Internet selesai." #: standalone/net_monitor:235 #, c-format msgid "Connection complete." msgstr "Koneksi rampung." #: standalone/net_monitor:236 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrakelinux Control Center." msgstr "" "Koneksi gagal.\n" "Periksa konfigurasi Anda di Pusat Kontrol Mandrakelinux." #: standalone/net_monitor:340 #, c-format msgid "Color configuration" msgstr "Konfigurasi warna" #: standalone/net_monitor:388 standalone/net_monitor:408 #, c-format msgid "sent: " msgstr "dikirimkan: " #: standalone/net_monitor:395 standalone/net_monitor:412 #, c-format msgid "received: " msgstr "diterima: " #: standalone/net_monitor:402 #, c-format msgid "average" msgstr "rata-rata" #: standalone/net_monitor:405 #, c-format msgid "Local measure" msgstr "Ukuran lokal" #: standalone/net_monitor:466 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "Awas, koneksi internet lain terdeteksi, mungkin memakai jaringan Anda" #: standalone/net_monitor:477 #, fuzzy, c-format msgid "No internet connection configured" msgstr "konfigurasi koneksi Internet" #: standalone/printerdrake:68 #, c-format msgid "Reading data of installed printers..." msgstr "Baca data dari printer terinstal..." #: standalone/printerdrake:116 #, fuzzy, c-format msgid "%s Printer Management Tool" msgstr "Manajemen Pengguna \n" #: standalone/printerdrake:130 standalone/printerdrake:131 #: standalone/printerdrake:132 standalone/printerdrake:133 #: standalone/printerdrake:141 standalone/printerdrake:142 #: standalone/printerdrake:146 #, c-format msgid "/_Actions" msgstr "/_Aksi" #: standalone/printerdrake:130 standalone/printerdrake:142 #, fuzzy, c-format msgid "/_Add Printer" msgstr "Printer" #: standalone/printerdrake:131 #, c-format msgid "/Set as _Default" msgstr "/Set sebagai nilai _awal" #: standalone/printerdrake:132 #, c-format msgid "/_Edit" msgstr "/_Edit" #: standalone/printerdrake:133 #, c-format msgid "/_Delete" msgstr "/_Hapus" #: standalone/printerdrake:134 #, c-format msgid "/_Expert mode" msgstr "/Mode _Ahli" #: standalone/printerdrake:139 #, c-format msgid "/_Refresh" msgstr "/Penyega_ran" #: standalone/printerdrake:146 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "Konfigurasi X" #: standalone/printerdrake:181 #, c-format msgid "Search:" msgstr "Cari:" #: standalone/printerdrake:184 #, c-format msgid "Apply filter" msgstr "Terapkan filter" #: standalone/printerdrake:211 standalone/printerdrake:218 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:211 standalone/printerdrake:218 #, fuzzy, c-format msgid "Printer Name" msgstr "Nama antrian printer" #: standalone/printerdrake:211 #, c-format msgid "Connection Type" msgstr "Tipe Koneksi" #: standalone/printerdrake:218 #, fuzzy, c-format msgid "Server Name" msgstr "Nama Server:" #. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:226 #, fuzzy, c-format msgid "Add Printer" msgstr "Printer" #: standalone/printerdrake:226 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Tambah pengguna ke sistem" #. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:229 #, fuzzy, c-format msgid "Set as default" msgstr "standar" #: standalone/printerdrake:229 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "Set printer ini sebagai standar" #: standalone/printerdrake:232 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Edit server yg dipilih" #: standalone/printerdrake:235 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Hapus aturan terpilih" #: standalone/printerdrake:238 #, c-format msgid "Refresh the list" msgstr "Segarkan daftar" #. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE #: standalone/printerdrake:241 #, fuzzy, c-format msgid "Configure CUPS" msgstr "Konfigurasi X" #: standalone/printerdrake:241 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Ubah sistem cetak" #: standalone/printerdrake:299 standalone/printerdrake:337 #, c-format msgid "Enabled" msgstr "aktif" #: standalone/printerdrake:300 standalone/printerdrake:338 #, c-format msgid "Disabled" msgstr "Dinonaktifkan" #: standalone/printerdrake:560 #, c-format msgid "Authors: " msgstr "Pengarang: " #. -PO: here %s is the version number #: standalone/printerdrake:570 #, fuzzy, c-format msgid "Printer Management %s" msgstr "Manajemen Pengguna \n" #: standalone/scannerdrake:51 #, fuzzy, c-format msgid "" "SANE packages need to be installed to use scanners.\n" "\n" "Do you want to install the SANE packages?" msgstr "Paket %s perlu diupgrade. Anda ingin instal?" #: standalone/scannerdrake:55 #, fuzzy, c-format msgid "Aborting Scannerdrake." msgstr "Scannerdrake" #: standalone/scannerdrake:60 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:61 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:67 standalone/scannerdrake:491 #, c-format msgid "Searching for configured scanners..." msgstr "Cari scanner terkonfigurasi ..." #: standalone/scannerdrake:71 standalone/scannerdrake:495 #, c-format msgid "Searching for new scanners..." msgstr "Cari scanner baru ..." #: standalone/scannerdrake:79 standalone/scannerdrake:517 #, c-format msgid "Re-generating list of configured scanners..." msgstr "Daftar konfigurasi scanner sedang dibuat lagi..." #: standalone/scannerdrake:101 #, fuzzy, c-format msgid "The %s is not supported by this version of %s." msgstr "Tiada support untuk %s pada Linux Mandrake versi ini." #: standalone/scannerdrake:104 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "%s ditemukan di %s, konfigurasikan secara otomatis?" #: standalone/scannerdrake:116 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "%s tak ada di database scanner, konfigurasikan secara manual?" #: standalone/scannerdrake:131 #, c-format msgid "Select a scanner model" msgstr "Pilih model scanner" #: standalone/scannerdrake:132 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:133 #, c-format msgid "Detected model: %s" msgstr "Model terdeteksi: %s" #: standalone/scannerdrake:136 #, c-format msgid "Port: %s" msgstr "Port: %s" #: standalone/scannerdrake:138 standalone/scannerdrake:141 #, c-format msgid " (UNSUPPORTED)" msgstr "" #: standalone/scannerdrake:144 #, fuzzy, c-format msgid "The %s is not supported under Linux." msgstr "Tiada support untuk %s pada Linux Mandrake versi ini." #: standalone/scannerdrake:171 standalone/scannerdrake:185 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:175 standalone/scannerdrake:227 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:176 standalone/scannerdrake:228 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:177 standalone/scannerdrake:231 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:178 standalone/scannerdrake:232 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:180 standalone/scannerdrake:239 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:200 #, fuzzy, c-format msgid "Select firmware file" msgstr "Pilih file" #: standalone/scannerdrake:203 standalone/scannerdrake:262 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:226 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:230 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:233 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:235 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:258 #, fuzzy, c-format msgid "Select firmware file for the %s" msgstr "Pilih file" #: standalone/scannerdrake:276 #, fuzzy, c-format msgid "Could not install the firmware file for the %s!" msgstr "Pilih file" #: standalone/scannerdrake:289 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:299 #, c-format msgid "The %s is unsupported" msgstr "%s tak disupport" #: standalone/scannerdrake:304 #, fuzzy, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "%s harus dikonfigurasikan oleh printerdrake.\n" "Anda dapat meluncurkan printerdrake dari Pusat Kontrol Mandrake bagian " "Hardware." #: standalone/scannerdrake:308 standalone/scannerdrake:315 #: standalone/scannerdrake:345 #, c-format msgid "Auto-detect available ports" msgstr "Deteksi otomatis port tersedia" #: standalone/scannerdrake:310 standalone/scannerdrake:356 #, c-format msgid "Please select the device where your %s is attached" msgstr "Pilihlah device tempat %s terhubung" #: standalone/scannerdrake:311 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "(Catatan: port paralel tak dapat dideteksi secara otomatis)" #: standalone/scannerdrake:313 standalone/scannerdrake:358 #, c-format msgid "choose device" msgstr "pilih device" #: standalone/scannerdrake:347 #, c-format msgid "Searching for scanners..." msgstr "Cari scanner..." #: standalone/scannerdrake:383 #, fuzzy, c-format msgid "Setting up kernel modules..." msgstr "Memuat modul kernel printer USB ...\n" #: standalone/scannerdrake:390 standalone/scannerdrake:397 #, fuzzy, c-format msgid "Attention!" msgstr "Atraksi" #: standalone/scannerdrake:391 #, c-format msgid "" "Your %s cannot be configured fully automatically.\n" "\n" "Manual adjustments are required. Please edit the configuration file /etc/" "sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:392 standalone/scannerdrake:401 #, c-format msgid "" "More info in the driver's manual page. Run the command \"man sane-%s\" to " "read it." msgstr "" #: standalone/scannerdrake:394 standalone/scannerdrake:403 #, fuzzy, c-format msgid "" "After that you may scan documents using \"XSane\" or \"Kooka\" from " "Multimedia/Graphics in the applications menu." msgstr "" "%s telah dikonfigurasikan.\n" "Anda dapat men-scan dokumen dg \"XSane\" dari Multimedia/Grafik di menu " "aplikasi." #: standalone/scannerdrake:398 #, c-format msgid "" "Your %s has been configured, but it is possible that additional manual " "adjustments are needed to get it to work. " msgstr "" #: standalone/scannerdrake:399 #, c-format msgid "" "If it does not appear in the list of configured scanners in the main window " "of Scannerdrake or if it does not work correctly, " msgstr "" #: standalone/scannerdrake:400 #, c-format msgid "edit the configuration file /etc/sane.d/%s.conf. " msgstr "" #: standalone/scannerdrake:406 #, fuzzy, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/" "Graphics in the applications menu." msgstr "" "%s telah dikonfigurasikan.\n" "Anda dapat men-scan dokumen dg \"XSane\" dari Multimedia/Grafik di menu " "aplikasi." #: standalone/scannerdrake:431 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Scanner berikut\n" "\n" "%s\n" "tersedia di sistem Anda.\n" #: standalone/scannerdrake:432 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Scanner berikut\n" "\n" "%s\n" "tersedia di sistem Anda.\n" #: standalone/scannerdrake:435 standalone/scannerdrake:438 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Tidak ada scanner yg dapat dipakai sistem Anda.\n" #: standalone/scannerdrake:452 #, c-format msgid "Search for new scanners" msgstr "Cari scanner baru" #: standalone/scannerdrake:458 #, c-format msgid "Add a scanner manually" msgstr "Tambah scanner secara manual" #: standalone/scannerdrake:465 #, fuzzy, c-format msgid "Install/Update firmware files" msgstr "Pilih file" #: standalone/scannerdrake:471 #, c-format msgid "Scanner sharing" msgstr "Sharing scanner" #: standalone/scannerdrake:530 standalone/scannerdrake:695 #, c-format msgid "All remote machines" msgstr "Semua komputer remote" #: standalone/scannerdrake:542 standalone/scannerdrake:845 #, c-format msgid "This machine" msgstr "Mesin ini" #: standalone/scannerdrake:582 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessible by remote machines and by which remote machines." msgstr "" "Anda dapat memutuskan di sini apakah scanner yg terhubung di komputer ini " "dapat diakses oleh komputer lain dan oleh komputer mana." #: standalone/scannerdrake:583 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Dapat juga scanner di komputer remote dibuat agar dapat dipakai di komputer " "ini." #: standalone/scannerdrake:586 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "Scanner di komputer ini dapat dipakai oleh komputer lain" #: standalone/scannerdrake:588 #, c-format msgid "Scanner sharing to hosts: " msgstr "Sharing scanner ke host: " #: standalone/scannerdrake:602 #, c-format msgid "Use scanners on remote computers" msgstr "Pakai scanner di komputer remote" #: standalone/scannerdrake:605 #, c-format msgid "Use the scanners on hosts: " msgstr "Gunakan scanner pada host: " #: standalone/scannerdrake:632 standalone/scannerdrake:704 #: standalone/scannerdrake:854 #, c-format msgid "Sharing of local scanners" msgstr "Sharing scanner local" #: standalone/scannerdrake:633 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "Ini adalah komputer yang scanner lokalnya akan tersedia:" #: standalone/scannerdrake:644 standalone/scannerdrake:794 #, c-format msgid "Add host" msgstr "Tambah host" #: standalone/scannerdrake:650 standalone/scannerdrake:800 #, c-format msgid "Edit selected host" msgstr "Edit host terpilih" #: standalone/scannerdrake:659 standalone/scannerdrake:809 #, c-format msgid "Remove selected host" msgstr "Hapus host terpilih" #: standalone/scannerdrake:683 standalone/scannerdrake:691 #: standalone/scannerdrake:696 standalone/scannerdrake:742 #: standalone/scannerdrake:833 standalone/scannerdrake:841 #: standalone/scannerdrake:846 standalone/scannerdrake:892 #, c-format msgid "Name/IP address of host:" msgstr "Nama/alamat IP host:" #: standalone/scannerdrake:705 standalone/scannerdrake:855 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "Pilihlah host yang scanner lokalnya akan dipakai:" #: standalone/scannerdrake:716 standalone/scannerdrake:866 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Anda harus memasukkan nama host atau alamat IP.\n" #: standalone/scannerdrake:727 standalone/scannerdrake:877 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "Host ini sudah terdaftar, tidak dapat ditambahkan lagi.\n" #: standalone/scannerdrake:782 #, c-format msgid "Usage of remote scanners" msgstr "Pemakaian scanner remote" #: standalone/scannerdrake:783 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "Berikut adalah komputer dimana scanner akan dipakai:" #: standalone/scannerdrake:940 #, c-format msgid "" "saned needs to be installed to share the local scanner(s).\n" "\n" "Do you want to install the saned package?" msgstr "" "saned perlu diinstall untuk men-share scanner lokal.\n" "\n" "Apakah Anda ingin menginstall paket saned?" #: standalone/scannerdrake:944 standalone/scannerdrake:948 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "Scanner Anda tidak akan tersedia pada jaringan." #: standalone/service_harddrake:104 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Beberapa divais pada kelas perangkat keras \"%s\" dihapus:\n" #: standalone/service_harddrake:105 #, c-format msgid "- %s was removed\n" msgstr "- %s telah dihapus\n" #: standalone/service_harddrake:108 #, c-format msgid "Some devices were added: %s\n" msgstr "Beberapa divais ditambahkan: %s\n" #: standalone/service_harddrake:109 #, c-format msgid "- %s was added\n" msgstr "- %s telah ditambahkan\n" #: standalone/service_harddrake:204 #, c-format msgid "Hardware probing in progress" msgstr "Pendeteksian perangkat keras sedang berjalan" #: standalone/service_harddrake_confirm:7 #, c-format msgid "Hardware changes in \"%s\" class (%s seconds to answer)" msgstr "Perubahan perangkat keras pada kelas \"%s\" (%s detik untuk menjawab)" #: standalone/service_harddrake_confirm:8 #, c-format msgid "Do you want to run the appropriate config tool?" msgstr "Apakah Anda ingin menjalankan perkakas konfigurasi yang sesuai?" #: steps.pm:14 #, c-format msgid "Language" msgstr "Bahasa" #: steps.pm:15 #, c-format msgid "License" msgstr "Lisensi" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Konfigurasi mouse" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Deteksi hard disk" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Pilih kelas instalasi" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Pilih keyboard" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Pembuatan partisi" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Format partisi" #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Pilih paket yang akan diinstal" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Instal sistem" #: steps.pm:25 #, c-format msgid "Administrator password" msgstr "Katasandi root" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Tambahkan pengguna" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Konfigurasi jaringan" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Instal bootloader" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Konfigurasi X" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Konfigurasi layanan" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Instal update" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Keluar dari proses instalasi" #: ugtk2.pm:900 #, c-format msgid "Is this correct?" msgstr "Sudah benar?" #: ugtk2.pm:960 #, c-format msgid "No file chosen" msgstr "Tidak ada file yang dipilih" #: ugtk2.pm:962 #, c-format msgid "You have chosen a file, not a directory" msgstr "Anda telah memilih file, bukan direktori" #: ugtk2.pm:964 #, c-format msgid "You have chosen a directory, not a file" msgstr "Anda telah memilih sebuah direktori, bukan file" #: ugtk2.pm:966 #, c-format msgid "No such directory" msgstr "Tidak ada direktori itu" #: ugtk2.pm:966 #, c-format msgid "No such file" msgstr "Tidak ada file itu" #: ugtk2.pm:1045 #, c-format msgid "Expand Tree" msgstr "Buka Tree" #: ugtk2.pm:1046 #, c-format msgid "Collapse Tree" msgstr "Tutup Tree" #: ugtk2.pm:1047 #, c-format msgid "Toggle between flat and group sorted" msgstr "Pindah tampilan antara terurut rata dan grup" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s tidak terinstall\n" "Klik \"Maju\" untuk menginstal atau \"Batal\" untuk keluar" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Instalasi gagal" #~ msgid "MandrakeSoft Wizards" #~ msgstr "Wizard MandrakeSoft" #~ msgid "No browser available! Please install one" #~ msgstr "Browser tak tersedia! Silahkan menginstall satu buah" #~ msgid "" #~ "No browser is installed on your system, Please install one if you want to " #~ "browse the help system" #~ msgstr "" #~ "Browser tidak ditemukan. Silakan instal satu buah jika Anda ingin " #~ "menjelajah sistem pertolongan" #~ msgid "Installing HPOJ package..." #~ msgstr "Instalasi paket HPOJ..." #~ msgid "Checking device and configuring HPOJ..." #~ msgstr "Pengujian divais dan konfigurasi HPOJ..." #~ msgid "" #~ "Insert a floppy in drive\n" #~ "All data on this floppy will be lost" #~ msgstr "" #~ "Masukkan disket ke drive\n" #~ "semua data di disket ini akan hilang" #~ msgid "Insert a FAT formatted floppy in drive %s" #~ msgstr "Masukkan disket yang sudah diformat dengan tipe FAT pada drive %s" #~ msgid "This floppy is not FAT formatted" #~ msgstr "Disket ini tidak diformat dengan sistem FAT" #~ msgid "" #~ "To use this saved packages selection, boot installation with ``linux " #~ "defcfg=floppy''" #~ msgstr "" #~ "Untuk menggunakan pilihan paket yang sudah disimpan sebelumnya, bootlah " #~ "instalasi dengan pilihan ''linux defcfg=floppy''" #~ msgid "Load/Save on floppy" #~ msgstr "Muat/Simpan pada floppy" #~ msgid "" #~ "Please choose load or save package selection on floppy.\n" #~ "The format is the same as auto_install generated floppies." #~ msgstr "" #~ "Pilih muat/simpan pilihan paket pada floppy.\n" #~ "Formatnya sama dengan floppy buatan auto_install." #~ msgid "Load from floppy" #~ msgstr "Muat dari floppy" #~ msgid "Save on floppy" #~ msgstr "Simpan pada floppy" #~ msgid "Package selection" #~ msgstr "Pilihan paket" #~ msgid "Loading from floppy" #~ msgstr "Memuat dari disket" #~ msgid "Insert a floppy containing package selection" #~ msgstr "Masukkan disket yang berisi pilihan paket" #~ msgid "Active Firewall : intrusion detected" #~ msgstr "Firewall Aktif : intrusi terdeteksi" #~ msgid "Do you want to blacklist the attacker ?" #~ msgstr "Apakah Anda ingin memasukkan penyerang dalam daftar hitam?" #~ msgid "" #~ "_: keyboard\n" #~ "Bengali" #~ msgstr "Bengal" #~ msgid "Application:" #~ msgstr "Aplikasi:" #~ msgid "Release: " #~ msgstr "Rilis: " #~ msgid "Summary: " #~ msgstr "Ringkasan: " #~ msgid "Submit kernel version" #~ msgstr "Kirimkan versi kernel" #~ msgid "connecting to %s..." #~ msgstr "menghubungkan ke %s..." #~ msgid "Please enter a package name." #~ msgstr "Silahkan masukkan nama paket." #~ msgid "Please enter summary text." #~ msgstr "Silahkan masukkan teks ringkasan" #~ msgid "Loading printer configuration... Please wait" #~ msgstr "Memuat konfigurasi printer... Silahkan menunggu" #~ msgid "The " #~ msgstr "Sebuah " #~ msgid "%s (was %s)" #~ msgstr "%s (adalah %s)" #~ msgid "Root password" #~ msgstr "Katasandi root" #~ msgid "Do you want to recover your system?" #~ msgstr "Apakah Anda ingin mengembalikan sistem Anda?" #~ msgid "Samba server" #~ msgstr "Server Samba" #~ msgid "Move" #~ msgstr "Pindah" #~ msgid "Which disk do you want to move it to?" #~ msgstr "Disk mana yang hendak dipindah?" #~ msgid "Sector" #~ msgstr "Sektor" #~ msgid "Which sector do you want to move it to?" #~ msgstr "Sektor mana yang hendak dipindah" #~ msgid "Moving" #~ msgstr "Memindahkan" #~ msgid "Moving partition..." #~ msgstr "Memindahkan partisi..." #~ msgid "Error opening %s for writing: %s" #~ msgstr "Kesalahan membuka file %s untuk penulisan: %s" #~ msgid "OK" #~ msgstr "OK" #~ msgid "" #~ "The following options can be set to customize your\n" #~ "system security. If you need an explanation, look at the help tooltip.\n" #~ msgstr "" #~ "Opsi berikut dapat diset untuk mengatur keamanan sistem Anda.\n" #~ "Jika Anda butuh penjelasan, carilah di tooltip Bantuan.\n" #~ msgid "The %s is not known by this version of Scannerdrake." #~ msgstr "%s tidak dikenal oleh Scannerdrake versi ini." #~ msgid "Czech (QWERTZ)" #~ msgstr "Ceko (QWERTZ)" #~ msgid "German" #~ msgstr "Jerman" #~ msgid "Dvorak" #~ msgstr "Dvorak" #~ msgid "Spanish" #~ msgstr "Spanyol" #~ msgid "Finnish" #~ msgstr "Finlandia" #~ msgid "French" #~ msgstr "Perancis" #~ msgid "Norwegian" #~ msgstr "Norwegia" #~ msgid "Polish" #~ msgstr "Polandia" #~ msgid "Russian" #~ msgstr "Rusia" #~ msgid "Swedish" #~ msgstr "Swedia" #~ msgid "Albanian" #~ msgstr "Albania" #~ msgid "Armenian (old)" #~ msgstr "Armenia (lama)" #~ msgid "Armenian (typewriter)" #~ msgstr "Armenia (komputertik)" #~ msgid "Armenian (phonetic)" #~ msgstr "Armenia (fonetik)" #~ msgid "Arabic" #~ msgstr "Arab" #~ msgid "Azerbaidjani (latin)" #~ msgstr "Azerbaijan (latin)" #~ msgid "Belgian" #~ msgstr "Belgia" #~ msgid "Bengali" #~ msgstr "Bengal" #~ msgid "Bulgarian (phonetic)" #~ msgstr "Bulagaria (fonetik)" #~ msgid "Bulgarian (BDS)" #~ msgstr "Bulgaria (BDS)" #~ msgid "Brazilian (ABNT-2)" #~ msgstr "Brazil (ABNT-2)" #~ msgid "Bosnian" #~ msgstr "Bosnia" #~ msgid "Belarusian" #~ msgstr "Belarusia" #~ msgid "Swiss (German layout)" #~ msgstr "Swis (layout Jerman)" #~ msgid "Swiss (French layout)" #~ msgstr "Swis (layout Prancis)" #~ msgid "Czech (QWERTY)" #~ msgstr "Ceko (QWERTY)" #~ msgid "German (no dead keys)" #~ msgstr "Jerman (tanpa dead key)" #~ msgid "Devanagari" #~ msgstr "Devanagari" #~ msgid "Danish" #~ msgstr "Denmark" #~ msgid "Dvorak (US)" #~ msgstr "Dvorak (US)" #~ msgid "Dvorak (Norwegian)" #~ msgstr "Dvorak (Norwegia)" #~ msgid "Dvorak (Swedish)" #~ msgstr "Dvorak (Swedia)" #~ msgid "Estonian" #~ msgstr "Estonia" #~ msgid "Georgian (\"Russian\" layout)" #~ msgstr "Georgia (layout \"Rusia\")" #~ msgid "Georgian (\"Latin\" layout)" #~ msgstr "Georgia (layout \"Latin\")" #~ msgid "Greek" #~ msgstr "Yunani" #~ msgid "Greek (polytonic)" #~ msgstr "Yunani (politonik)" #~ msgid "Gujarati" #~ msgstr "Gujarat" #~ msgid "Gurmukhi" #~ msgstr "Gurmukh" #~ msgid "Hungarian" #~ msgstr "Hungaria" #~ msgid "Croatian" #~ msgstr "Kroasia" #~ msgid "Israeli" #~ msgstr "Ibrani" #~ msgid "Israeli (Phonetic)" #~ msgstr "Ibrani (fonetik)" #~ msgid "Iranian" #~ msgstr "Iran" #~ msgid "Icelandic" #~ msgstr "Islandia" #~ msgid "italin" #~ msgstr "itali" #~ msgid "Inuktitut" #~ msgstr "Inuktitut" #~ msgid "Japanese 106 keys" #~ msgstr "Jepang 106 tombol" #~ msgid "Kannada" #~ msgstr "Kannada" #~ msgid "Korean keyboard" #~ msgstr "Keyboard Korea" #~ msgid "Latin American" #~ msgstr "Amerika Latin" #~ msgid "Laotian" #~ msgstr "Laos" #~ msgid "Lithuanian AZERTY (old)" #~ msgstr "Lithuania AZERTY (lama)" #~ msgid "Lithuanian AZERTY (new)" #~ msgstr "Lithuania AZERTY (baru)" #~ msgid "Lithuanian \"number row\" QWERTY" #~ msgstr "Lithuania \"number row\" QWERTY" #~ msgid "Lithuanian \"phonetic\" QWERTY" #~ msgstr "Lithuania \"fonetik\" QWERTY" #~ msgid "Latvian" #~ msgstr "Latvia" #~ msgid "Malayalam" #~ msgstr "Malayalam" #~ msgid "Macedonian" #~ msgstr "Macedonia" #~ msgid "Myanmar (Burmese)" #~ msgstr "Myanmar (Burma)" #~ msgid "Mongolian (cyrillic)" #~ msgstr "Mongol (cyrillic)" #~ msgid "Maltese (UK)" #~ msgstr "Malta (UK)" #~ msgid "Maltese (US)" #~ msgstr "Malta (US)" #~ msgid "Dutch" #~ msgstr "Belanda" #~ msgid "Oriya" #~ msgstr "Oriya" #~ msgid "Polish (qwerty layout)" #~ msgstr "Polandia (layout qwerty)" #~ msgid "Polish (qwertz layout)" #~ msgstr "Polandia (layout qwertz)" #~ msgid "Portuguese" #~ msgstr "Portugis" #~ msgid "Canadian (Quebec)" #~ msgstr "Kanada (Quebec)" #~ msgid "Romanian (qwertz)" #~ msgstr "Romania (qwertz)" #~ msgid "Romanian (qwerty)" #~ msgstr "Romania (qwerty)" #~ msgid "Russian (Phonetic)" #~ msgstr "Rusia (fonetik)" #~ msgid "Saami (norwegian)" #~ msgstr "Saami (norwegia)" #~ msgid "Slovenian" #~ msgstr "Slovenia" #~ msgid "Slovakian (QWERTZ)" #~ msgstr "Slovakia (QWERTZ)" #~ msgid "Slovakian (QWERTY)" #~ msgstr "Slovakia (QWERTY)" #~ msgid "Serbian (cyrillic)" #~ msgstr "Serbia (cyrillic)" #~ msgid "Syriac" #~ msgstr "Syria" #~ msgid "Syriac (phonetic)" #~ msgstr "Syiria (fonetik)" #~ msgid "Telugu" #~ msgstr "Telugu" #~ msgid "Tamil (ISCII-layout)" #~ msgstr "Tamil (layout ISCII)" #~ msgid "Tamil (Typewriter-layout)" #~ msgstr "Tamil (layout komputer ketik)" #~ msgid "Thai keyboard" #~ msgstr "keyboard Thai" #~ msgid "Tajik keyboard" #~ msgstr "keyboard Tajik" #~ msgid "Turkish (traditional \"F\" model)" #~ msgstr "Turki (model \"F\" tradisional)" #~ msgid "Turkish (modern \"Q\" model)" #~ msgstr "Turki (model \"Q\" modern)" #~ msgid "Ukrainian" #~ msgstr "Ukraina" #~ msgid "Uzbek (cyrillic)" #~ msgstr "Uzbek (cyrillic)" #~ msgid "Vietnamese \"numeric row\" QWERTY" #~ msgstr "Vietnam \"numeric row\" QWERTY" #~ msgid "Yugoslavian (latin)" #~ msgstr "Yugoslavia (latin)" #~ msgid "Enable multiple profiles" #~ msgstr "Aktifkan banyak profil" #~ msgid "" #~ "You now have the opportunity to download updated packages. These " #~ "packages\n" #~ "have been updated after the distribution was released. They may\n" #~ "contain security or bug fixes.\n" #~ "\n" #~ "To download these packages, you will need to have a working Internet \n" #~ "connection.\n" #~ "\n" #~ "Do you want to install the updates ?" #~ msgstr "" #~ "Anda memiliki kesempatan untuk mendownload paket update. \n" #~ "Paket ini telah diupdate setelah distribusi dirilis. Mereka mungkin\n" #~ "memiliki perbaikan keamanan atau cacat.\n" #~ "\n" #~ "Untuk mendownload paket ini, Anda perlu koneksi Internet.\n" #~ "\n" #~ "Apakah Anda ingin menginstall update?" #~ msgid "Installing bootloader" #~ msgstr "Menginstall bootloader" #~ msgid "" #~ "You may now provide options to module %s.\n" #~ "Options are in format ``name=value name2=value2...''.\n" #~ "For instance, ``io=0x300 irq=7''" #~ msgstr "" #~ "Anda bisa menyediakan opsi untuk modul %s.\n" #~ "Opsi biasanya dalam format ``nama=nilai nama2=nilai2...''.\n" #~ "Misalnya, ``io=0x300 irq=7''" #~ msgid "Configuring printer..." #~ msgstr "Konfigurasi printer..." #~ msgid "Configuring applications..." #~ msgstr "Konfigurasi aplikasi..." #~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "Tambah printer ini ke Star Office/OpenOffice.org/GIMP" #~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "Hapus printer ini dari Star Office/OpenOffice.org/GIMP" #~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP" #~ msgstr "Menambahkan printer ke Star Office/OpenOffice.org/GIMP" #~ msgid "" #~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/" #~ "GIMP." #~ msgstr "" #~ "Printer \"%s\" sukses ditambahkan ke Star Office/OpenOffice.org/GIMP." #~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Gagal menambahkan printer \"%s\" ke Star Office/OpenOffice.org/GIMP." #~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP" #~ msgstr "Hapus printer dari Star Office/OpenOffice.org/GIMP" #~ msgid "" #~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice." #~ "org/GIMP." #~ msgstr "Printer \"%s\" sukses dihapus dari Star Office/OpenOffice.org/GIMP." #~ msgid "" #~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." #~ msgstr "" #~ "Gagal menghapus printer \"%s\" dari Star Office/OpenOffice.org/GIMP." #~ msgid "Installation of %s failed. The following error occurred:" #~ msgstr "Instalasi %s gagal. Terdapat kesalahan berikut:" #~ msgid "Set of tools to read and send mail and news and to browse the Web" #~ msgstr "" #~ "Kumpulan perkakas untuk membaca, mengirim email dan berita serta " #~ "menjelajah Web" #~ msgid "Use auto detection" #~ msgstr "Gunakan deteksi otomatis" #~ msgid "" #~ "\"%s\": clicking on the \"%s\" button will open the printer " #~ "configuration\n" #~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for " #~ "more\n" #~ "information on how to setup a new printer. The interface presented there " #~ "is\n" #~ "similar to the one used during installation." #~ msgstr "" #~ "\"%s\": Mengklik pada tombol \"%s\" akan membuka wizard konfigurasi " #~ "printer.\n" #~ "Periksa bab yang bersangkutan pada ``Pedoman Pemula'' untuk informasi \n" #~ "lebih lanjut tentang cara \n" #~ "setup printer baru. Antarmuka yang ditampilkan \n" #~ "sama dengan yang dipakai saat instalasi." #~ msgid "" #~ "\"%s\": check the current country selection. If you are not in this\n" #~ "country, click on the \"%s\" button and choose another one. If your " #~ "country\n" #~ "is not in the first list shown, click the \"%s\" button to get the " #~ "complete\n" #~ "country list." #~ msgstr "" #~ "\"%s\": pastikan pilihan negara aktual. Jika Anda tidak berada pada " #~ "negara\n" #~ "ini, klik pada tombol \"%s\" dan pilih yang lain. Jika negara Anda \n" #~ "tidak ada pada daftar, klik tombol \"%s\" untuk mendapatkan daftar " #~ "lengkap negara." #~ msgid "GRUB" #~ msgstr "GRUB" #~ msgid "/dev/hda" #~ msgstr "/dev/hda" #~ msgid "/dev/hdb" #~ msgstr "/dev/hdb" #~ msgid "/dev/fd0" #~ msgstr "/dev/fd0" #~ msgid "" #~ "\"%s\": if a sound card is detected on your system, it is displayed " #~ "here.\n" #~ "If you notice the sound card displayed is not the one that is actually\n" #~ "present on your system, you can click on the button and choose another\n" #~ "driver." #~ msgstr "" #~ "\"%s\": jika kartu suara terdeteksi pada sistem Anda, akan ditampilkandi " #~ "sini.\n" #~ "Jika Anda mendapati kartu suara yang tampil tidak sesuai dengan yang ada\n" #~ "pada sistem Anda, Anda bisa klik pada tombol dan pilih driver lain.\n" #~ msgid "" #~ "No ethernet network adapter has been detected on your system.\n" #~ "I cannot set up this connection type." #~ msgstr "" #~ "Tidak ada adapter jaringan ethernet yang terdeteksi pada sistem Anda.\n" #~ "Tipe koneksi ini tak dapat diset up." #~ msgid "" #~ "Please choose which network adapter you want to use to connect to " #~ "Internet." #~ msgstr "" #~ "Pilih adapter jaringan yang akan digunakan untuk terhubung ke Internet" #~ msgid "" #~ "To submit a bug report, click on the button report.\n" #~ "This will open a web browser window on %s\n" #~ " where you'll find a form to fill in. The information displayed above " #~ "will be \n" #~ "transferred to that server." #~ msgstr "" #~ "Untuk mengirimkan laporan kesalahan, klik pada tombol laporan.\n" #~ "Ini akan membuka window browser web pada %s\n" #~ "dimana Anda akan menemukan formulir untuk diisi. Info yang ditampilkan di " #~ "atas akan\n" #~ "ditransfer ke server tersebut." #~ msgid "chunk size" #~ msgstr "ukuran chunk" #~ msgid "mkraid failed (maybe raidtools are missing?)" #~ msgstr "mkraid gagal (mungkin raidtoolsnya tidak ada?)" #~ msgid "mkraid failed" #~ msgstr "mkraid gagal" #~ msgid "" #~ "[OPTIONS] [PROGRAM_NAME]\n" #~ "\n" #~ "OPTIONS:\n" #~ " --help - print this help message.\n" #~ " --report - program should be one of mandrake tools\n" #~ " --incident - program should be one of mandrake tools" #~ msgstr "" #~ "[OPSI] [NAMA_PROGRAM]\n" #~ "\n" #~ "OPSI:\n" #~ " --help - cetak pesan bantuan ini.\n" #~ " --report - program harus berupa perkakas mandrake\n" #~ " --incident - program harus berupa perkakas mandrake" #~ msgid "Mandrake Online" #~ msgstr "Mandrake Online" #~ msgid "" #~ "Connection failed.\n" #~ "Verify your configuration in the Mandrake Control Center." #~ msgstr "" #~ "Koneksi gagal.\n" #~ "Periksa konfigurasi Anda di Pusat Kontrol Mandrake." #~ msgid "The package %s is needed. Install it?" #~ msgstr "Paket %s diperlukan. Anda ingin instal?" #~ msgid "ignore" #~ msgstr "abaikan" #~ msgid "no" #~ msgstr "tidak" #~ msgid "yes" #~ msgstr "ya" #~ msgid "SILO Installation" #~ msgstr "Instalasi SILO" #~ msgid "First sector of boot partition" #~ msgstr "Sektor pertama pada partisi boot" #~ msgid "Bootloader installation" #~ msgstr "Instalasi Bootloader" #~ msgid "SILO" #~ msgstr "SILO" #~ msgid "Alcatel speedtouch usb" #~ msgstr "usb speedtouch Alcatel" #~ msgid "Sagem (using pppoa) usb" #~ msgstr "usb Sagem (menggunakan pppoa)" #~ msgid "Harddrake2 version %s" #~ msgstr "Harddrake2 versi %s" #~ msgid "transmitted" #~ msgstr "dikirimkan" #~ msgid "received" #~ msgstr "diterima" #~ msgid "" #~ "You can export using NFS or SMB. Please select which you'd like to use." #~ msgstr "" #~ "Anda bisa mengekspor menggunakan NFS atau SMB. Pilih yang hendak Anda " #~ "gunakan." #~ msgid "" #~ "You can export using NFS or Samba. Please select which you'd like to use." #~ msgstr "Anda dapat mengekspor dg NFS atau Samba. Pilih yg Anda ingin." #~ msgid "You must be root to read configuration file. \n" #~ msgstr "Hanya root yang dapat membaca file konfigurasi.\n" #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Kartu Anda bisa memiliki dukungan akselerasi hardware 3D, tapi hanya pada " #~ "Xorg %s.\n" #~ "Kartu Anda ini didukung oleh Xorg %s yang mungkin memiliki dukungan lebih " #~ "baik dalam 2D." #~ msgid "" #~ "Your card can have 3D hardware acceleration support but only with Xorg %" #~ "s,\n" #~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" #~ "Your card is supported by Xorg %s which may have a better support in 2D." #~ msgstr "" #~ "Kartu Anda dapat menggunakan akselerasi hardware 3D pada Xorg %s,\n" #~ "PERHATIKAN INI DALAM TAHAP PERCOBAAN DAN DAPAT MEMBUAT KOMPUTER ANDA " #~ "HANG.\n" #~ "Kartu Anda ini didukung oleh Xorg %s yang mungkin memiliki dukungan lebih " #~ "baik dalam 2D." #~ msgid "Xpmac (installation display driver)" #~ msgstr "Xpmac (instalasi driver display)" #~ msgid "4 billion colors (32 bits)" #~ msgstr "4 milyar warna (32 bit)" #~ msgid "XFree86 server: %s\n" #~ msgstr "Server XFree86: %s\n" #~ msgid "Here is the full list of keyboards available" #~ msgstr "Berikut adalah daftar keyboard yang tersedia" #~ msgid "Please insert the Boot floppy used in drive %s" #~ msgstr "Masukkan floppy boot ke drive %s" #~ msgid "XawTV is not installed!" #~ msgstr "XawTV tidak terinstall" #~ msgid "Provider dns 1 (optional)" #~ msgstr "DNS Provider 1 (opsional)" #~ msgid "Provider dns 2 (optional)" #~ msgstr "DNS Provider 2 (opsional)" #~ msgid "DHCP Client" #~ msgstr "Klien DHCP" #~ msgid "" #~ "Change\n" #~ "Restore Path" #~ msgstr "" #~ "Ubah\n" #~ "Path Restorasi" #~ msgid "European protocol" #~ msgstr "Protokol Eropa" #~ msgid "Found \"%s\" interface do you want to use it ?" #~ msgstr "Ditemukan antarmuka \"%s\" Anda ingin menggunakannya?" #~ msgid "What kind is your ISDN connection?" #~ msgstr "Tipe koneksi ISDN apa yang Anda miliki?" #~ msgid "Do you want to start a new configuration ?" #~ msgstr "Apakah Anda ingin menjalankan konfigurasi baru?" #~ msgid "" #~ "I have detected an ISDN PCI card, but I do not know its type. Please " #~ "select a PCI card on the next screen." #~ msgstr "" #~ "Telah terdeteksi sebuah card ISDN PCI, tapi tidak diketahui jenisnya. " #~ "Silakan pilih card PCI tersebut pada layar berikutnya." #~ msgid "No ISDN PCI card found. Please select one on the next screen." #~ msgstr "" #~ "Tidak ada kartu PCI ISDN yang ditemukan. Pilihlah satu pada layar berikut." #~ msgid "Under Devel ... please wait." #~ msgstr "Sedang dikembangkan ... harap menunggu." #~ msgid "Windows (FAT32)" #~ msgstr "Windows (FAT32)" #~ msgid "" #~ "This uses the same syntax as the command line program 'cdrecord'. " #~ "'cdrecord -scanbus' would also show you the device number." #~ msgstr "" #~ "Ini menggunakan syntax seperti program baris perintah 'cdrecord'. " #~ "'cdrecord -scanbus' juga akan menunjukkan nomor device." #~ msgid "" #~ "Enter your CD Writer device name\n" #~ " ex: 0,1,0" #~ msgstr "" #~ "Masukkan nama divais CD Writer Anda\n" #~ " mis: 0,1,0" #~ msgid "Scientific Workstation" #~ msgstr "Workstation Ilmiah" #~ msgid "Scientific applications such as gnuplot" #~ msgstr "Aplikasi ilmiah seperti gnuplot" #~ msgid "Can not create log file!" #~ msgstr "Tidak bisa membuat file log!" #~ msgid "Please select media for backup..." #~ msgstr "Pilih media untuk backup..." #~ msgid "Configuration of a remote printer" #~ msgstr "Konfigurasi printer remote" #~ msgid "Gnome Workstation" #~ msgstr "Workstation Gnome" #~ msgid "Running \"%s\" ..." #~ msgstr "Menjalankan \"%s\"..." #~ msgid "utopia 25" #~ msgstr "utopia 25" #~ msgid "On Hard Drive" #~ msgstr "Pada Hard Drive" #~ msgid "Messages" #~ msgstr "Pesan" #~ msgid "Syslog" #~ msgstr "Syslog" #~ msgid "Compact" #~ msgstr "Ringkas"