# Copyright (C) 2000-2001 Free Software Foundation, Inc. # Emese Kovacs , 2000-2001. # Arpad Biro , 2000 # Tamas Szanto , 2001 # msgid "" msgstr "" "Project-Id-Version: DrakX\n" "POT-Creation-Date: 2002-12-05 19:52+0100\n" "PO-Revision-Date: 2002-09-21 23:03+0200\n" "Last-Translator: Arpad Biro \n" "Language-Team: Hungarian\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-2\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.9.6\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 KB" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 KB" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB vagy több" #: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "Válasszon egy X-kiszolgálót" #: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X-kiszolgáló" #: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "A többképernyős mód beállítása" #: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "A grafikus kártya lehetővé teszi több képernyő használatát.\n" "Mit szeretne tenni?" #: ../../Xconfig/card.pm_.c:288 msgid "Select the memory size of your graphics card" msgstr "Válassza ki a grafikus kártyán található memória mennyiségét" #: ../../Xconfig/card.pm_.c:349 msgid "XFree configuration" msgstr "XFree-beállítások" #: ../../Xconfig/card.pm_.c:351 msgid "Which configuration of XFree do you want to have?" msgstr "Melyik XFree-t szeretné használni?" #: ../../Xconfig/card.pm_.c:383 msgid "Configure all heads independently" msgstr "A képernyők egymástól független beállítása" #: ../../Xconfig/card.pm_.c:384 msgid "Use Xinerama extension" msgstr "A Xinerama kiterjesztés használata" #: ../../Xconfig/card.pm_.c:389 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Csak a(z) \"%s\"%s kártya beállítása" #: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s hardveres 3D-s gyorsítással" #: ../../Xconfig/card.pm_.c:416 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n" "Az XFree %s is használható; elképzelhető, hogy abban jobb a 2D-s támogatás." #: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióval." #: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s KÍSÉRLETI JELLEGŰ hardveres 3D-s gyorsítással" #: ../../Xconfig/card.pm_.c:429 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n" "EZ KÍSÉRLETI JELLEGŰ; HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET.\n" "Az XFree %s verzió is használható; elképzelhető, hogy ebben jobb a 2D-s\n" "támogatás." #: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióban,\n" "DE EZ KÍSÉRLETI JELLEGŰ, HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET!" #: ../../Xconfig/card.pm_.c:455 msgid "Xpmac (installation display driver)" msgstr "Xpmac (telepítési meghajtóprogram)" #: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 #: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961 msgid "Custom" msgstr "Egyéni" #: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "Grafikus kártya" #: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "Monitor" #: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210 msgid "Resolution" msgstr "Felbontás" #: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "Teszt" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67 #: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "Beállítások" #: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269 #: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 #: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181 #: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015 #: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435 #: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949 msgid "Ok" msgstr "OK" #: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114 #: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204 msgid "Quit" msgstr "Kilépés" #: ../../Xconfig/main.pm_.c:145 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Meg szeretné tartani a módosításokat?\n" "A jelenlegi beállítás:\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "A monitor kiválasztása" #: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "Plug and Play" #: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "Általános" #: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67 #: ../../standalone/harddrake2_.c:68 msgid "Vendor" msgstr "Gyártó" #: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "A Plug'n Play-felderítés sikertelen. Válasszon ki egy monitort." #: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "A két legfontosabb paraméter a függőleges frissítés frekvenciája (a teljes\n" "képernyő frissítési gyorsasága) és a vízszintes frissítés frekvenciája (a\n" "vízszintes sorok megjelenítésének gyorsasága).\n" "\n" "NAGYON FONTOS, hogy egyik se lépje túl a monitorhoz engedélyezett\n" "felső határértéket, mert ilyenkor esetleg a monitor megsérülhet.\n" "Ha nem ismeri a monitor jellemzőit, válasszon egy biztonságosan\n" "alacsony értéket!" #: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "Vízszintes frissítés" #: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "Függőleges frissítés" #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 szín (8-bites)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32 ezer szín (15-bites)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65 ezer szín (16-bites)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 millió szín (24-bites)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 milliárd szín (32-bites)" #: ../../Xconfig/resolution_and_depth.pm_.c:130 msgid "Resolutions" msgstr "Felbontások" #: ../../Xconfig/resolution_and_depth.pm_.c:255 msgid "Choose the resolution and the color depth" msgstr "Válassza ki a felbontást és a színmélységet" #: ../../Xconfig/resolution_and_depth.pm_.c:256 #, c-format msgid "Graphics card: %s" msgstr "Grafikus kártya: %s" #: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001 #: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345 #: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 #: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055 #: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198 #: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907 #: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960 #: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047 #: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104 #: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112 #: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286 #: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677 #: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918 #: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204 #: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295 #: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438 #: ../../ugtk2.pm_.c:926 msgid "Cancel" msgstr "Mégsem" #: ../../Xconfig/test.pm_.c:29 msgid "Test of the configuration" msgstr "A beállítások kipróbálása" #: ../../Xconfig/test.pm_.c:30 msgid "Do you want to test the configuration?" msgstr "Ki szeretné próbálni a beállításokat?" #: ../../Xconfig/test.pm_.c:30 msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Figyelmeztetés: a grafikus kártya tesztelése esetleg a gép lefagyásához is " "vezethet." #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Billentyűzetkiosztás: %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "Az egér típusa: %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "Az egeret kezelő eszköz: %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "A vízsz. frissítési frekvencia: %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "A függ. frissítési frekvencia: %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "A grafikus kártya: %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "A kártya memóriája: %s KB\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "Színmélység: %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "Felbontás: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "XFree86-meghajtó: %s\n" #: ../../Xconfig/various.pm_.c:61 msgid "Graphical interface at startup" msgstr "Indítás grafikus módban" #: ../../Xconfig/various.pm_.c:62 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Beállítható, hogy rendszerindításkor a grafikus felület (az XFree) " "automatikusan elinduljon.\n" "Szeretné, ha a grafikus felület elindulna a rendszer indításakor?" #: ../../Xconfig/various.pm_.c:73 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "Úgy tűnik, a grafikus kártyának van tévékimenete.\n" "Framebuffer segítségével lehetőség van ennek használatára.\n" "\n" "Ehhez a grafikus kártyát a televízióra kell csatlakoztatni még a számítógép " "bekapcsolása előtt.\n" "Ez után a rendszerbetöltőben válassza ki a \"tévékimenet\" bejegyzést.\n" "\n" "Valóban van tévékimenet a grafikus kártyán?" #: ../../Xconfig/various.pm_.c:85 msgid "What norm is your TV using?" msgstr "Milyen normát használ a televízió?" #: ../../any.pm_.c:107 ../../any.pm_.c:132 msgid "First sector of boot partition" msgstr "A rendszerindítási partíció első szektora" #: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209 msgid "First sector of drive (MBR)" msgstr "A lemezmeghajtó legelső szektora (MBR)" #: ../../any.pm_.c:111 msgid "SILO Installation" msgstr "A SILO telepítése" #: ../../any.pm_.c:112 ../../any.pm_.c:125 msgid "Where do you want to install the bootloader?" msgstr "Hová kerüljön a rendszerindító program (bootloader)?" #: ../../any.pm_.c:124 msgid "LILO/grub Installation" msgstr "A LILO/GRUB telepítése" #: ../../any.pm_.c:136 ../../any.pm_.c:150 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:138 msgid "LILO with text menu" msgstr "LILO, szöveges menüvel" #: ../../any.pm_.c:139 ../../any.pm_.c:150 msgid "LILO with graphical menu" msgstr "LILO, grafikus menüvel" #: ../../any.pm_.c:142 msgid "Grub" msgstr "GRUB" #: ../../any.pm_.c:146 msgid "Boot from DOS/Windows (loadlin)" msgstr "Indítás DOS-ból vagy Windowsból (loadlin)" #: ../../any.pm_.c:148 ../../any.pm_.c:150 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:158 ../../any.pm_.c:189 msgid "Bootloader main options" msgstr "Rendszerindítási beállítások" #: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader to use" msgstr "A használni kívánt rendszerbetöltő" #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "A rendszerindító program telepítése" #: ../../any.pm_.c:163 ../../any.pm_.c:192 msgid "Boot device" msgstr "Rendszerindítási eszköz" #: ../../any.pm_.c:164 msgid "Compact" msgstr "Kompakt" #: ../../any.pm_.c:164 msgid "compact" msgstr "kompakt" #: ../../any.pm_.c:165 ../../any.pm_.c:289 msgid "Video mode" msgstr "Képernyőmód" #: ../../any.pm_.c:167 msgid "Delay before booting default image" msgstr "Várakozási idő az alapértelmezett rendszer betöltése előtt" #: ../../any.pm_.c:169 ../../any.pm_.c:772 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71 #: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916 #: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622 #: ../../standalone/drakconnect_.c:647 msgid "Password" msgstr "Jelszó" #: ../../any.pm_.c:170 ../../any.pm_.c:773 #: ../../install_steps_interactive.pm_.c:1078 msgid "Password (again)" msgstr "Jelszó (még egyszer)" #: ../../any.pm_.c:171 msgid "Restrict command line options" msgstr "A parancssorban átadható paraméterek korlátozása" #: ../../any.pm_.c:171 msgid "restrict" msgstr "korlátozás" #: ../../any.pm_.c:173 msgid "Clean /tmp at each boot" msgstr "A /tmp törlése minden újraindulásnál" #: ../../any.pm_.c:174 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "A RAM mérete, ha szükséges (%d MB-ot detektáltam)" #: ../../any.pm_.c:176 msgid "Enable multi profiles" msgstr "Több profil engedélyezése" #: ../../any.pm_.c:180 msgid "Give the ram size in MB" msgstr "A fizikai memória mérete MB-ban" #: ../../any.pm_.c:182 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "\"A parancssorban átadható paraméterek korlátozása\" beállításnak jelszó " "nélkül nincs értelme" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../diskdrake/interactive.pm_.c:1204 #: ../../install_steps_interactive.pm_.c:1072 msgid "Please try again" msgstr "Próbálja meg újra" #: ../../any.pm_.c:183 ../../any.pm_.c:748 #: ../../install_steps_interactive.pm_.c:1072 msgid "The passwords do not match" msgstr "A jelszavak nem egyeznek" #: ../../any.pm_.c:191 msgid "Init Message" msgstr "Indítási üzenet" #: ../../any.pm_.c:193 msgid "Open Firmware Delay" msgstr "Késleltetés Open Firmware-nél" #: ../../any.pm_.c:194 msgid "Kernel Boot Timeout" msgstr "Várakozási idő rendszerindításkor" #: ../../any.pm_.c:195 msgid "Enable CD Boot?" msgstr "CD-ről történhet rendszerindítás?" #: ../../any.pm_.c:196 msgid "Enable OF Boot?" msgstr "OF-ről történhet rendszerindítás?" #: ../../any.pm_.c:197 msgid "Default OS?" msgstr "Az alapértelmezett op. rendszer?" #: ../../any.pm_.c:231 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Azt a lehetőséget választotta, hogy a rendszerbetöltőt egy partícióra " "telepíti.\n" "Ez arra utal, hogy már van rendszerbetöltő (például: System Commander) azon " "a\n" "merevlemezen, amelyről a rendszer indítása történik.\n" "\n" "Melyik meghajtóról végzi a rendszer indítását?" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "Itt láthatók az indítási menü jelenlegi bejegyzései.\n" "Új bejegyzések vehetők fel, illetve módosíthatók a meglevők." #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531 #: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953 #: ../../standalone/drakfont_.c:996 msgid "Add" msgstr "Hozzáadás" #: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68 #: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726 msgid "Done" msgstr "Kész" #: ../../any.pm_.c:257 msgid "Modify" msgstr "Módosítás" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "Milyen bejegyzést szeretne felvenni?" #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "Egyéb op. rendszer (SunOS...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "Egyéb op. rendszer (MacOS...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "Egyéb op. rendszer (Windows...)" #: ../../any.pm_.c:285 msgid "Image" msgstr "Indítófájl" #: ../../any.pm_.c:286 ../../any.pm_.c:297 msgid "Root" msgstr "Gyökér" #: ../../any.pm_.c:287 ../../any.pm_.c:315 msgid "Append" msgstr "Hozzáfűzés" #: ../../any.pm_.c:291 msgid "Initrd" msgstr "Indítási RAM-diszk" #: ../../any.pm_.c:292 msgid "Read-write" msgstr "Írható-olvasható" #: ../../any.pm_.c:299 msgid "Table" msgstr "Tábla" #: ../../any.pm_.c:300 msgid "Unsafe" msgstr "Nem biztonságos" #: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314 msgid "Label" msgstr "Címke" #: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215 msgid "Default" msgstr "Alapértelmezés" #: ../../any.pm_.c:316 msgid "Initrd-size" msgstr "Az indítási RAM-diszk mérete" #: ../../any.pm_.c:318 msgid "NoVideo" msgstr "NoVideo" #: ../../any.pm_.c:326 msgid "Remove entry" msgstr "Bejegyzés eltávolítása" #: ../../any.pm_.c:329 msgid "Empty label not allowed" msgstr "A címke nem lehet üres" #: ../../any.pm_.c:330 msgid "You must specify a kernel image" msgstr "Meg kell adni egy kernelfájlt" #: ../../any.pm_.c:330 msgid "You must specify a root partition" msgstr "Meg kell adni egy gyökérpartíciót" #: ../../any.pm_.c:331 msgid "This label is already used" msgstr "Már van ilyen nevű címke" #: ../../any.pm_.c:640 #, c-format msgid "Found %s %s interfaces" msgstr "%s %s csatolót találtam" #: ../../any.pm_.c:641 msgid "Do you have another one?" msgstr "Van még másik is?" #: ../../any.pm_.c:642 #, c-format msgid "Do you have any %s interfaces?" msgstr "Van valamilyen %s csatoló?" #: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925 msgid "No" msgstr "Nem" #: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258 #: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267 #: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925 msgid "Yes" msgstr "Igen" #: ../../any.pm_.c:645 msgid "See hardware info" msgstr "A hardverjellemzők megjelenítése" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:662 #, c-format msgid "Installing driver for %s card %s" msgstr "Meghajtóprogram telepítése ehhez a(z) %s-kártyához: %s" #: ../../any.pm_.c:663 #, c-format msgid "(module %s)" msgstr "(%s modul)" #: ../../any.pm_.c:674 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Most megadhatók a(z) \"%s\" modul paraméterei.\n" "A címeket \"0x\" előtaggal kell megadni, például: \"0x123\"." #: ../../any.pm_.c:680 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Itt lehet megadni a(z) %s modul paramétereit\n" "a következő formátumban: \"név1=érték1 név2=érték2 ...\".\n" "Például: \"io=0x300 irq=7\"" #: ../../any.pm_.c:682 msgid "Module options:" msgstr "A modul paraméterei:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:694 #, c-format msgid "Which %s driver should I try?" msgstr "Melyik %s-meghajtóprogramot próbáljam meg?" #: ../../any.pm_.c:703 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Bizonyos esetekben a(z) %s meghajtóprogramnak további paraméterekre van\n" "szüksége a helyes működéshez. Szeretne további paramétereket megadni a\n" "meghajtóprogramnak, vagy hagyja, hogy az lekérdezze a szükséges\n" "információkat? Bizonyos körülmények esetén az automatikus detektálás\n" "a gép lefagyásához vezethet, de komolyabb kárt nem okozhat." #: ../../any.pm_.c:707 msgid "Autoprobe" msgstr "Automatikus detektálás" #: ../../any.pm_.c:707 msgid "Specify options" msgstr "Paraméterek megadása" #: ../../any.pm_.c:719 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "A(z) %s modul betöltése nem sikerült.\n" "Megpróbálja a betöltést más paraméterekkel?" #: ../../any.pm_.c:734 msgid "access to X programs" msgstr "hozzáférés az X-es programokhoz" #: ../../any.pm_.c:735 msgid "access to rpm tools" msgstr "hozzáférés az RPM-eszközökhöz" #: ../../any.pm_.c:736 msgid "allow \"su\"" msgstr "\"su\" engedélyezése" #: ../../any.pm_.c:737 msgid "access to administrative files" msgstr "hozzáférés az adminisztrációs fájlokhoz" #: ../../any.pm_.c:738 msgid "access to network tools" msgstr "hozzáférés a hálózati eszközökhöz" #: ../../any.pm_.c:739 msgid "access to compilation tools" msgstr "hozzáférés a fordítási eszközökhöz" #: ../../any.pm_.c:744 #, c-format msgid "(already added %s)" msgstr "(már fel van véve: %s)" #: ../../any.pm_.c:749 msgid "This password is too simple" msgstr "Ez a jelszó túl egyszerű" #: ../../any.pm_.c:750 msgid "Please give a user name" msgstr "Adjon meg egy felhasználónevet" #: ../../any.pm_.c:751 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "A felhasználónév csak a következőket tartalmazhatja: kisbetűk, számok, \"-\" " "és \"_\"" #: ../../any.pm_.c:752 msgid "The user name is too long" msgstr "A felhasználónév túl hosszú" #: ../../any.pm_.c:753 msgid "This user name is already added" msgstr "Már létezik ilyen felhasználónév" #: ../../any.pm_.c:757 msgid "Add user" msgstr "Felhasználó hozzáadása" #: ../../any.pm_.c:758 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Adjon meg egy felhasználónevet\n" "%s" #: ../../any.pm_.c:759 msgid "Accept user" msgstr "Név elfogadása" #: ../../any.pm_.c:770 msgid "Real name" msgstr "Valódi név" #: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802 #: ../../printer/printerdrake.pm_.c:915 msgid "User name" msgstr "Felhasználónév" #: ../../any.pm_.c:774 msgid "Shell" msgstr "Parancsértelmező" #: ../../any.pm_.c:776 msgid "Icon" msgstr "Ikon" #: ../../any.pm_.c:803 msgid "Autologin" msgstr "Automatikus bejelentkezés" #: ../../any.pm_.c:804 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "Beállítható, hogy indításkor egy felhasználó automatikusan bejelentkezzen.\n" "Szeretné használni ezt a lehetőséget?" #: ../../any.pm_.c:808 msgid "Choose the default user:" msgstr "Adja meg az alapértelmezett felhasználónevet:" #: ../../any.pm_.c:809 msgid "Choose the window manager to run:" msgstr "Válassza ki a használni kívánt ablakkezelőt:" #: ../../any.pm_.c:824 msgid "Please choose a language to use." msgstr "Válasszon nyelvet." #: ../../any.pm_.c:826 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "A Mandrake Linux több nyelvvel is telepíthető. Jelölje ki,\n" "mely nyelveket szeretné telepíteni. Ezek a telepítés befejeződése\n" "utáni újraindítást követően lesznek elérhetők." #: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697 #: ../../standalone/drakxtv_.c:70 msgid "All" msgstr "Mind" #: ../../any.pm_.c:961 msgid "Allow all users" msgstr "Az összes felhasználó engedélyezése" #: ../../any.pm_.c:961 msgid "No sharing" msgstr "Nincs megosztás" #: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "A(z) %s csomagot telepíteni kell. Szeretné telepíteni?" #: ../../any.pm_.c:973 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "Exportálás NFS-sel vagy Sambával végezhető. Válassza ki, melyiket kívánja " "használni." #: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190 #, c-format msgid "Mandatory package %s is missing" msgstr "Hiányzik a(z) \"%s\" nevű kötelező csomag" #: ../../any.pm_.c:987 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Szeretné engedélyezni a felhasználók számára azt, hogy a saját " "könyvtáraikat\n" "megosszák?\n" "Ha ez engedélyezve van, akkor a felhasználók a Konquerorban és a " "Nautilusban\n" "a \"Megosztás\" funkcióval végezhetnek exportálást.\n" "\n" "Az \"Egyéni\" opció használatával felhasználónkénti beállítás lehetséges.\n" #: ../../any.pm_.c:1001 msgid "Launch userdrake" msgstr "UserDrake indítása" #: ../../any.pm_.c:1003 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" "A felhasználónkénti megosztás a \"fileshare\" csoportot használja.\n" "A UserDrake programmal lehet felhasználót felvenni ebbe a csoportba." #: ../../any.pm_.c:1053 ../../security/level.pm_.c:7 msgid "Welcome To Crackers" msgstr "Üdvözlet a cracker-eknek" #: ../../any.pm_.c:1054 ../../security/level.pm_.c:8 msgid "Poor" msgstr "Gyenge" #: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9 msgid "Standard" msgstr "Szabványos" #: ../../any.pm_.c:1056 ../../security/level.pm_.c:10 msgid "High" msgstr "Magas" #: ../../any.pm_.c:1057 ../../security/level.pm_.c:11 msgid "Higher" msgstr "Magasabb" #: ../../any.pm_.c:1058 ../../security/level.pm_.c:12 msgid "Paranoid" msgstr "Paranoiás" #: ../../any.pm_.c:1061 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Ezt a szintet csak körültekintéssel használja.\n" "Egyszerűbbé teszi a rendszer használatát, de így az sebezhetőbb is lesz:\n" "ne válassza ezt a szintet, ha a gép hálózatba van kötve, vagy az " "internethez\n" "csatlakozik. A hozzáférés nincs jelszóval védve." #: ../../any.pm_.c:1064 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "A jelszavak be vannak kapcsolva, de hálózatra kapcsolódó gép esetén\n" "ez a konfiguráció még mindig nem ajánlott." #: ../../any.pm_.c:1065 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Ez a szabványos biztonsági szint, amely az internetre (kliensként) " "csatlakozó gépek esetén javasolt." #: ../../any.pm_.c:1066 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Már vannak bizonyos megszorítások, és több automatikus ellenőrzés fut " "éjszakánként." #: ../../any.pm_.c:1067 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Ezzel a biztonsági szinttel már használhatja a gépét kiszolgálóként.\n" "Ez a biztonsági szint elég magas ahhoz, hogy a rendszer sok, hálózaton\n" "keresztül csatlakozó klienst szolgáljon ki. Ha a gép az interneten csak " "kliensként van jelen, akkor érdemesebb egy alacsonyabb szintet választani." #: ../../any.pm_.c:1070 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Az előző szinthez hasonló, de itt a rendszer teljesen zárt.\n" "Ez a legbiztonságosabb szint." #: ../../any.pm_.c:1076 msgid "DrakSec Basic Options" msgstr "DrakSec - alapvető beállítások" #: ../../any.pm_.c:1077 msgid "Please choose the desired security level" msgstr "Válassza ki a kívánt biztonsági szintet" #: ../../any.pm_.c:1080 msgid "Security level" msgstr "Biztonsági szint" #: ../../any.pm_.c:1082 msgid "Use libsafe for servers" msgstr "A libsafe használata kiszolgálókhoz" #: ../../any.pm_.c:1083 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Könyvtár, amely védelmet nyújt a puffertúlcsordulásos és a formátumsztringes " "támadások ellen." #: ../../any.pm_.c:1084 msgid "Security Administrator (login or email)" msgstr "Biztonsági adminisztrátor (felhasználói név vagy email-cím)" #: ../../any.pm_.c:1166 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Itt kijelölheti azt a billentyűt vagy billentyűkombinációt, amellyel\n" "a különböző billentyűzetkiosztások (például: latin illetve nem-latin)\n" "közt lehet majd váltani." # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:436 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Udvozoljuk a(z) %s rendszerinditoban!\n" "\n" "Valasszon egy operacios rendszert a listabol, vagy varjon\n" "%d masodpercig, amig az alapertelmezett elindul.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:983 msgid "Welcome to GRUB the operating system chooser!" msgstr "Udvozoljuk a GRUB rendszerindito programban!" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:986 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "A(z) %c es a(z) %c billentyukkel lehet a bejegyzesek kozott lepegetni." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:989 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" "Nyomja meg az Enter billentyut a kijelolt rendszer inditasahoz, az 'e'-t " # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:992 msgid "commands before booting, or 'c' for a command-line." msgstr "az inditasi parancsok modositasahoz, vagy a 'c'-t a parancssorhoz." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:995 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "A kijelolt operacios rendszer %d masodperc mulva elindul." #: ../../bootloader.pm_.c:999 msgid "not enough room in /boot" msgstr "nincs elég hely a /boot partíción" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1099 msgid "Desktop" msgstr "Asztal" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1101 msgid "Start Menu" msgstr "Start menü" #: ../../bootloader.pm_.c:1120 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "A rendszerindító program nem tehető %s partícióra\n" #: ../../bootlook.pm_.c:53 msgid "Boot Style Configuration" msgstr "A rendszerindítás beállításai" #: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54 #: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82 #: ../../standalone/logdrake_.c:74 msgid "/_File" msgstr "/_Fájl" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/logdrake_.c:80 msgid "/File/_Quit" msgstr "/Fájl/Ki_lépés" #: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55 #: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80 msgid "Q" msgstr "Q" #: ../../bootlook.pm_.c:82 msgid "NewStyle Categorizing Monitor" msgstr "Új stílusú kategorizáló monitor" #: ../../bootlook.pm_.c:83 msgid "NewStyle Monitor" msgstr "Új stílusú monitor" #: ../../bootlook.pm_.c:84 msgid "Traditional Monitor" msgstr "Hagyományos monitor" #: ../../bootlook.pm_.c:85 msgid "Traditional Gtk+ Monitor" msgstr "Hagyományos GTK+-monitor" #: ../../bootlook.pm_.c:86 msgid "Launch Aurora at boot time" msgstr "Az Aurora indítása rendszerindításkor" #: ../../bootlook.pm_.c:89 msgid "Lilo/grub mode" msgstr "LILO/GRUB mód" #: ../../bootlook.pm_.c:89 msgid "Yaboot mode" msgstr "Yaboot mód" #: ../../bootlook.pm_.c:138 msgid "Install themes" msgstr "Témák telepítése" #: ../../bootlook.pm_.c:139 msgid "" "Display theme\n" "under console" msgstr "" "Téma megjelenítése\n" "a konzolon" #: ../../bootlook.pm_.c:140 msgid "Create new theme" msgstr "Új téma létrehozása" #: ../../bootlook.pm_.c:184 #, c-format msgid "Backup %s to %s.old" msgstr "\"%s\" mentése \"%s.old\" névre" #: ../../bootlook.pm_.c:187 #, c-format msgid "Copy %s to %s" msgstr "\"%s\" másolása ebbe: \"%s\"" #: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224 #: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250 #: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119 #: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352 #: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481 #: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21 msgid "Error" msgstr "Hiba" #: ../../bootlook.pm_.c:192 msgid "Lilo message not found" msgstr "LILO-üzenet nem található" #: ../../bootlook.pm_.c:222 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "A /etc/sysconfig/bootsplash fájl nem írható." #: ../../bootlook.pm_.c:222 #, c-format msgid "Write %s" msgstr "Írás: %s" #: ../../bootlook.pm_.c:224 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" "A /etc/sysconfig/bootsplash fájl nem írható:\n" "a fájl nem található." #: ../../bootlook.pm_.c:235 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "Nem indítható el: mkinitrd -f /boot/initrd-%s.img %s." #: ../../bootlook.pm_.c:238 #, c-format msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." msgstr "Indítási RAM-diszk előállítása: 'mkinitrd -f /boot/initrd-%s.img %s'." #: ../../bootlook.pm_.c:244 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" "A LILO elindítása sikertelen.\n" "A LILO-téma telepítésének befejezéséhez adja ki parancssorban a \"lilo\"\n" "parancsot rendszergazdaként." #: ../../bootlook.pm_.c:248 msgid "Relaunch 'lilo'" msgstr "A LILO elindítása" #: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156 #: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449 msgid "Notice" msgstr "Megjegyzés" #: ../../bootlook.pm_.c:251 msgid "LiLo and Bootsplash themes installation successfull" msgstr "A LILO- és az indításikép-témák telepítése megtörtént" #: ../../bootlook.pm_.c:251 msgid "Theme installation failed!" msgstr "A témákat nem sikerült telepíteni." #: ../../bootlook.pm_.c:259 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "Jelenleg a(z) %s programot használja rendszerindításra.\n" "Kattintson a Beállítás gombra a beállításvarázsló elindításához." #: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380 #: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400 #: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551 msgid "Configure" msgstr "Beállítás" #: ../../bootlook.pm_.c:268 msgid "Splash selection" msgstr "Indítási kép választása" #: ../../bootlook.pm_.c:271 msgid "Themes" msgstr "Témák" #: ../../bootlook.pm_.c:273 msgid "" "\n" "Select theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" "\n" "Válasszon egy LILO- és\n" "egy indításikép-témát\n" "(egymástól függetlenül\n" "választhatók)." #: ../../bootlook.pm_.c:276 msgid "Lilo screen" msgstr "LILO-képernyő" #: ../../bootlook.pm_.c:281 msgid "Bootsplash" msgstr "Indítási kép" #: ../../bootlook.pm_.c:316 msgid "System mode" msgstr "Rendszer-mód" #: ../../bootlook.pm_.c:318 msgid "Launch the graphical environment when your system starts" msgstr "Rendszerindításkor induljon el a grafikus környezet" #: ../../bootlook.pm_.c:323 msgid "No, I don't want autologin" msgstr "Ne legyen automatikus bejelentkezés" #: ../../bootlook.pm_.c:325 msgid "Yes, I want autologin with this (user, desktop)" msgstr "Legyen automatikus bejelentkezés (felhasználónév, grafikus környezet)" #: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96 #: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355 #: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797 #: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137 #: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432 #: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561 #: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604 #: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911 #: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288 #: ../../ugtk2.pm_.c:355 msgid "OK" msgstr "OK" #: ../../common.pm_.c:107 msgid "GB" msgstr "GB" #: ../../common.pm_.c:107 msgid "KB" msgstr "KB" #: ../../common.pm_.c:107 msgid "MB" msgstr "MB" #: ../../common.pm_.c:115 msgid "TB" msgstr "TB" #: ../../common.pm_.c:123 #, c-format msgid "%d minutes" msgstr "%d perc" #: ../../common.pm_.c:125 msgid "1 minute" msgstr "1 perc" #: ../../common.pm_.c:127 #, c-format msgid "%d seconds" msgstr "%d másodperc" #: ../../common.pm_.c:172 msgid "Can't make screenshots before partitioning" msgstr "Partícionálás előtt nem készíthetők képernyőfelvételek" #: ../../common.pm_.c:179 #, c-format msgid "Screenshots will be available after install in %s" msgstr "A képernyőfelvételek a telepítés után itt lesznek elérhetők: %s" #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:127 msgid "France" msgstr "Franciaország" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "Costa Rica" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:130 msgid "Belgium" msgstr "Belgium" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "Cseh Köztársaság" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 msgid "Germany" msgstr "Németország" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 msgid "Greece" msgstr "Görögország" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 msgid "Norway" msgstr "Norvégia" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 msgid "Sweden" msgstr "Svédország" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:128 msgid "Netherlands" msgstr "Hollandia" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65 msgid "Italy" msgstr "Olaszország" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 msgid "Austria" msgstr "Ausztria" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118 #: ../../network/tools.pm_.c:131 msgid "United States" msgstr "Amerikai Egyesült Államok" #: ../../diskdrake/dav.pm_.c:19 msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "A WebDAV egy olyan protokoll, amely lehetővé teszi egy webkiszolgálón levő\n" "valamely könyvtár helyileg történő csatolását (mount) és helyi\n" "fájlrendszerként való kezelését (feltéve, hogy a webkiszolgáló be van\n" "állítva WebDAV-kiszolgálónak). Ha szeretne felvenni WebDAV csatolási\n" "pontokat, válassza az \"Új\" funkciót." #: ../../diskdrake/dav.pm_.c:27 msgid "New" msgstr "Új" #: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400 #: ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "Leválasztás" #: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397 #: ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "Csatlakoztatás" #: ../../diskdrake/dav.pm_.c:65 msgid "Server" msgstr "Kiszolgáló" #: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391 #: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "Csatlakoztatási pont" #: ../../diskdrake/dav.pm_.c:85 msgid "Please enter the WebDAV server URL" msgstr "Adja meg a WebDAV-kiszolgáló URL-jét" #: ../../diskdrake/dav.pm_.c:88 msgid "The URL must begin with http:// or https://" msgstr "Az URL-nek http:// vagy https:// kezdetűnek kell lenni" #: ../../diskdrake/dav.pm_.c:109 msgid "Server: " msgstr "Kiszolgáló: " #: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452 #: ../../diskdrake/interactive.pm_.c:1102 #: ../../diskdrake/interactive.pm_.c:1177 msgid "Mount point: " msgstr "Csatlakoztatási pont: " #: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183 #, c-format msgid "Options: %s" msgstr "Beállítások: %s" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "Please make a backup of your data first" msgstr "Először készítsen biztonsági mentést az adatokról" #: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946 #: ../../diskdrake/interactive.pm_.c:956 #: ../../diskdrake/interactive.pm_.c:1022 msgid "Read carefully!" msgstr "Olvassa el figyelmesen!" #: ../../diskdrake/hd_gtk.pm_.c:100 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Ha az aboot-ot fogja használni, először ellenőrizze, hogy maradt-e elég\n" "hely (legalább 2048 szektor) a lemez elején" #: ../../diskdrake/hd_gtk.pm_.c:154 msgid "Wizard" msgstr "Varázsló" #: ../../diskdrake/hd_gtk.pm_.c:187 msgid "Choose action" msgstr "Válasszon" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Egy nagy FAT partíció van\n" "(ez gyakran egy Microsoft DOS/Windows partíció).\n" "Célszerű először átméretezni a partíciót\n" "(kattintson a partícióra, majd az \"Átméretezés\" gombra)." #: ../../diskdrake/hd_gtk.pm_.c:194 msgid "Please click on a partition" msgstr "Kattintson egy partícióra" #: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:464 msgid "Details" msgstr "Részletek" #: ../../diskdrake/hd_gtk.pm_.c:254 msgid "No hard drives found" msgstr "Merevlemez nem található" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Journalised FS" msgstr "Naplózott fájlrendszer" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:325 msgid "Swap" msgstr "Lapozóterület (swap)" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118 msgid "Empty" msgstr "Üres" #: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324 #: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165 #: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719 msgid "Other" msgstr "Egyéb" #: ../../diskdrake/hd_gtk.pm_.c:330 msgid "Filesystem types:" msgstr "Fájlrendszer-típusok:" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414 msgid "Create" msgstr "Létrehozás" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392 #: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66 msgid "Type" msgstr "Típus" #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349 #, c-format msgid "Use ``%s'' instead" msgstr "Használja inkább ezt: \"%s\"" #: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401 msgid "Delete" msgstr "Törlés" #: ../../diskdrake/hd_gtk.pm_.c:353 msgid "Use ``Unmount'' first" msgstr "Használja először a \"Leválasztás\"-t" #: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "A(z) %s partíció típusának módosítása után a partíción levő adatok elvesznek" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose a partition" msgstr "Válasszon egy partíciót" #: ../../diskdrake/interactive.pm_.c:177 msgid "Choose another partition" msgstr "Válasszon egy másik partíciót" #: ../../diskdrake/interactive.pm_.c:202 msgid "Exit" msgstr "Kilépés" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to expert mode" msgstr "Átváltás szakértői módba" #: ../../diskdrake/interactive.pm_.c:228 msgid "Toggle to normal mode" msgstr "Átváltás normál módba" #: ../../diskdrake/interactive.pm_.c:228 msgid "Undo" msgstr "Visszavonás" #: ../../diskdrake/interactive.pm_.c:247 msgid "Continue anyway?" msgstr "Folytassam a műveletet?" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without saving" msgstr "Kilépés mentés nélkül" #: ../../diskdrake/interactive.pm_.c:252 msgid "Quit without writing the partition table?" msgstr "Ki akar lépni a programból a partíciós tábla mentése nélkül?" #: ../../diskdrake/interactive.pm_.c:257 msgid "Do you want to save /etc/fstab modifications" msgstr "El szeretné menteni az /etc/fstab fájlban végrehajtott módosításokat?" #: ../../diskdrake/interactive.pm_.c:271 msgid "Clear all" msgstr "Teljes törlés" #: ../../diskdrake/interactive.pm_.c:272 msgid "Auto allocate" msgstr "Automatikus helyfoglalás" #: ../../diskdrake/interactive.pm_.c:273 #: ../../install_steps_interactive.pm_.c:220 msgid "More" msgstr "Egyéb" #: ../../diskdrake/interactive.pm_.c:278 msgid "Hard drive information" msgstr "Merevlemez-jellemzők" #: ../../diskdrake/interactive.pm_.c:310 msgid "All primary partitions are used" msgstr "Mindegyik elsődleges partíció foglalt" #: ../../diskdrake/interactive.pm_.c:311 msgid "I can't add any more partition" msgstr "Nem hozható létre több partíció" #: ../../diskdrake/interactive.pm_.c:312 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "További partíciók létrehozásához törölni kell egyet (hogy egy kiterjesztett " "partíciót létre lehessen hozni)" #: ../../diskdrake/interactive.pm_.c:322 msgid "Save partition table" msgstr "A partíciós tábla mentése" #: ../../diskdrake/interactive.pm_.c:323 msgid "Restore partition table" msgstr "Partíciós tábla visszatöltése" #: ../../diskdrake/interactive.pm_.c:324 msgid "Rescue partition table" msgstr "A partíciós tábla helyreállítása" #: ../../diskdrake/interactive.pm_.c:326 msgid "Reload partition table" msgstr "A partíciós tábla újraolvasása" #: ../../diskdrake/interactive.pm_.c:331 msgid "Removable media automounting" msgstr "Cserélhető lemez automatikus csatlakoztatása" #: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360 msgid "Select file" msgstr "Fájlválasztás" #: ../../diskdrake/interactive.pm_.c:347 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "A partíciós tábla két példányának mérete eltér!\n" "Folytassam a műveletet?" #: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202 #: ../../network/modem.pm_.c:95 msgid "Warning" msgstr "Figyelmeztetés" #: ../../diskdrake/interactive.pm_.c:362 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Helyezzen be egy floppylemezt a meghajtóba!\n" "A lemezen található adatok elvesznek" #: ../../diskdrake/interactive.pm_.c:373 msgid "Trying to rescue partition table" msgstr "Megpróbálom helyrehozni a partíciós táblát" #: ../../diskdrake/interactive.pm_.c:379 msgid "Detailed information" msgstr "Részletes információ" #: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674 msgid "Resize" msgstr "Átméretezés" #: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727 msgid "Move" msgstr "Áthelyezés" #: ../../diskdrake/interactive.pm_.c:396 msgid "Format" msgstr "Formázás" #: ../../diskdrake/interactive.pm_.c:398 msgid "Add to RAID" msgstr "Hozzáadás RAID-hez" #: ../../diskdrake/interactive.pm_.c:399 msgid "Add to LVM" msgstr "Hozzáadás LVM-hez" #: ../../diskdrake/interactive.pm_.c:402 msgid "Remove from RAID" msgstr "Eltávolítás RAID-ből" #: ../../diskdrake/interactive.pm_.c:403 msgid "Remove from LVM" msgstr "Eltávolítás LVM-ből" #: ../../diskdrake/interactive.pm_.c:404 msgid "Modify RAID" msgstr "RAID módosítása" #: ../../diskdrake/interactive.pm_.c:405 msgid "Use for loopback" msgstr "Loopback-hez használva" #: ../../diskdrake/interactive.pm_.c:445 msgid "Create a new partition" msgstr "Új partíció létrehozása" #: ../../diskdrake/interactive.pm_.c:448 msgid "Start sector: " msgstr "Kezdőszektor: " #: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827 msgid "Size in MB: " msgstr "Méret (MB): " #: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828 msgid "Filesystem type: " msgstr "A fájlrendszer típusa: " #: ../../diskdrake/interactive.pm_.c:456 msgid "Preference: " msgstr "Beállítások: " #: ../../diskdrake/interactive.pm_.c:481 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Nem lehet új partíciót létrehozni\n" "(mivel elérte az elsődleges partíciók lehetséges maximális számát).\n" "Távolítson el egy elsődleges partíciót és hozzon létre egy kiterjesztett " "partíciót." #: ../../diskdrake/interactive.pm_.c:511 msgid "Remove the loopback file?" msgstr "El szeretné távolítani a loopback fájlt?" #: ../../diskdrake/interactive.pm_.c:541 msgid "Change partition type" msgstr "A partíciótípus megváltoztatása" #: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "Melyik fájlrendszert szeretné?" #: ../../diskdrake/interactive.pm_.c:548 msgid "Switching from ext2 to ext3" msgstr "Konvertálás Ext2-ről Ext3-ra" #: ../../diskdrake/interactive.pm_.c:578 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Hová szeretné csatlakoztatni a(z) %s loopback fájlt?" #: ../../diskdrake/interactive.pm_.c:579 #, c-format msgid "Where do you want to mount device %s?" msgstr "Hová szeretné csatlakoztatni a(z) %s eszközt?" #: ../../diskdrake/interactive.pm_.c:585 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Nem lehet megszüntetni a csatlakoztatási pontot, mert ez egy loopback\n" "partíció. Először távolítsa el a loopback-et." #: ../../diskdrake/interactive.pm_.c:606 #, c-format msgid "Where do you want to mount %s?" msgstr "Hová szeretné csatlakoztatni ezt: \"%s\"?" #: ../../diskdrake/interactive.pm_.c:630 msgid "Computing FAT filesystem bounds" msgstr "A FAT fájlrendszer jellemzőinek kiszámítása" #: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "Átméretezés" #: ../../diskdrake/interactive.pm_.c:662 msgid "This partition is not resizeable" msgstr "Ezt a partíciót nem lehet átméretezni" #: ../../diskdrake/interactive.pm_.c:667 msgid "All data on this partition should be backed-up" msgstr "Készítsen biztonsági mentést erről a partícióról" #: ../../diskdrake/interactive.pm_.c:669 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "A(z) %s partíció átméretezésekor a partíción található adatok elvesznek" #: ../../diskdrake/interactive.pm_.c:674 msgid "Choose the new size" msgstr "Adja meg az új méretet" #: ../../diskdrake/interactive.pm_.c:675 msgid "New size in MB: " msgstr "Az új méret (MB-ban): " #: ../../diskdrake/interactive.pm_.c:728 msgid "Which disk do you want to move it to?" msgstr "Melyik lemezre szeretné áthelyezni?" #: ../../diskdrake/interactive.pm_.c:729 msgid "Sector" msgstr "Szektor" #: ../../diskdrake/interactive.pm_.c:730 msgid "Which sector do you want to move it to?" msgstr "Melyik szektorra szeretné áthelyezni?" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving" msgstr "Áthelyezés" #: ../../diskdrake/interactive.pm_.c:733 msgid "Moving partition..." msgstr "Partíció áthelyezése..." #: ../../diskdrake/interactive.pm_.c:750 msgid "Choose an existing RAID to add to" msgstr "Válassza ki azt a RAID-et, amelyikhez hozzá szeretné adni a lemezt" #: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768 msgid "new" msgstr "új" #: ../../diskdrake/interactive.pm_.c:766 msgid "Choose an existing LVM to add to" msgstr "Válassza ki azt az LVM-et, amelyhez hozzá szeretné adni a lemezt" #: ../../diskdrake/interactive.pm_.c:771 msgid "LVM name?" msgstr "Az LVM neve?" #: ../../diskdrake/interactive.pm_.c:812 msgid "This partition can't be used for loopback" msgstr "Ez a partíció nem használható loopback-hez" #: ../../diskdrake/interactive.pm_.c:825 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm_.c:826 msgid "Loopback file name: " msgstr "A loopback fájl neve: " #: ../../diskdrake/interactive.pm_.c:831 msgid "Give a file name" msgstr "Adjon meg egy fájlnevet" #: ../../diskdrake/interactive.pm_.c:834 msgid "File already used by another loopback, choose another one" msgstr "" "Ez a fájl már egy másik loopback-hez van rendelve, válasszon egy másikat" #: ../../diskdrake/interactive.pm_.c:835 msgid "File already exists. Use it?" msgstr "A fájl már létezik, használjam?" #: ../../diskdrake/interactive.pm_.c:858 msgid "Mount options" msgstr "Csatlakoztatási (mount) opciók" #: ../../diskdrake/interactive.pm_.c:865 msgid "Various" msgstr "Vegyes" #: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76 msgid "device" msgstr "eszköz" #: ../../diskdrake/interactive.pm_.c:930 msgid "level" msgstr "szint" #: ../../diskdrake/interactive.pm_.c:931 msgid "chunk size" msgstr "szeletméret" #: ../../diskdrake/interactive.pm_.c:947 msgid "Be careful: this operation is dangerous." msgstr "Vigyázat! Ez a művelet adatvesztést okozhat." #: ../../diskdrake/interactive.pm_.c:962 msgid "What type of partitioning?" msgstr "Milyen típusú partícionálást szeretne?" #: ../../diskdrake/interactive.pm_.c:978 #, c-format msgid "The package %s is needed. Install it?" msgstr "Szükség van a(z) %s csomagra. Szeretné telepíteni?" #: ../../diskdrake/interactive.pm_.c:992 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Nem hozhatom létre a /boot-ot ennyire távol a merevlemez elejétől (cilinder\n" "> 1024). Ha a LILO-t használja, akkor az nem fog működni, ha pedig nem\n" "használja a LILO-t, akkor nincs szükség a /boot-ra." #: ../../diskdrake/interactive.pm_.c:996 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "Az a partíció, amelyet gyökérpartíciónak (/) jelölt ki, fizikailag az 1024.\n" "cilinder után található, és a rendszerben nincs /boot partíció.\n" "Ha a LILO-t szeretné használni, hozzon létre egy /boot partíciót." #: ../../diskdrake/interactive.pm_.c:1002 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "Szoftveres RAID partíciót választott ki gyökérpartíciónak (/).\n" "Egyik rendszerindító program sem tudja ezt kezelni /boot partíció nélkül,\n" "ezért mindenképpen hozzon létre egy /boot partíciót." #: ../../diskdrake/interactive.pm_.c:1022 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "A(z) \"%s\" meghajtó partíciótáblájának mentése következik!" #: ../../diskdrake/interactive.pm_.c:1026 msgid "You'll need to reboot before the modification can take place" msgstr "A változások csak a rendszer újraindításakor lépnek életbe" #: ../../diskdrake/interactive.pm_.c:1037 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "A(z) %s partíció formázásakor a partíción található adatok elvesznek!" #: ../../diskdrake/interactive.pm_.c:1039 msgid "Formatting" msgstr "Formázás" #: ../../diskdrake/interactive.pm_.c:1040 #, c-format msgid "Formatting loopback file %s" msgstr "A(z) %s loopback fájl formázása" #: ../../diskdrake/interactive.pm_.c:1041 #: ../../install_steps_interactive.pm_.c:466 #, c-format msgid "Formatting partition %s" msgstr "A(z) %s partíció formázása" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Hide files" msgstr "Fájlok elrejtése" #: ../../diskdrake/interactive.pm_.c:1052 msgid "Move files to the new partition" msgstr "Fájlok áthelyezése az új partícióra" #: ../../diskdrake/interactive.pm_.c:1053 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "A(z) %s könyvtár már tartalmaz adatot\n" "(%s)" #: ../../diskdrake/interactive.pm_.c:1064 msgid "Moving files to the new partition" msgstr "Fájlok áthelyezése az új partícióra" #: ../../diskdrake/interactive.pm_.c:1068 #, c-format msgid "Copying %s" msgstr "%s másolása" #: ../../diskdrake/interactive.pm_.c:1072 #, c-format msgid "Removing %s" msgstr "%s eltávolítása" #: ../../diskdrake/interactive.pm_.c:1082 #, c-format msgid "partition %s is now known as %s" msgstr "a(z) %s partíció jelenleg \"%s\"-ként ismert" #: ../../diskdrake/interactive.pm_.c:1103 #: ../../diskdrake/interactive.pm_.c:1162 msgid "Device: " msgstr "Eszköz: " #: ../../diskdrake/interactive.pm_.c:1104 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS-meghajtó betűjele: %s (ez csak egy tipp)\n" #: ../../diskdrake/interactive.pm_.c:1108 #: ../../diskdrake/interactive.pm_.c:1116 #: ../../diskdrake/interactive.pm_.c:1181 msgid "Type: " msgstr "Típus: " #: ../../diskdrake/interactive.pm_.c:1112 msgid "Name: " msgstr "Név: " #: ../../diskdrake/interactive.pm_.c:1120 #, c-format msgid "Start: sector %s\n" msgstr "Kezdőszektor: %s\n" #: ../../diskdrake/interactive.pm_.c:1121 #, c-format msgid "Size: %s" msgstr "Méret: %s" #: ../../diskdrake/interactive.pm_.c:1123 #, c-format msgid ", %s sectors" msgstr ", %s szektor" #: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Cylinder %d to %d\n" msgstr "A(z) %d. cilindertől a(z) %d.-ig\n" #: ../../diskdrake/interactive.pm_.c:1126 msgid "Formatted\n" msgstr "Formázva\n" #: ../../diskdrake/interactive.pm_.c:1127 msgid "Not formatted\n" msgstr "Nincs formázva\n" #: ../../diskdrake/interactive.pm_.c:1128 msgid "Mounted\n" msgstr "Csatlakoztatva\n" #: ../../diskdrake/interactive.pm_.c:1129 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1131 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback fájl(ok):\n" " %s\n" #: ../../diskdrake/interactive.pm_.c:1132 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Az alapértelmezett indítási partíció\n" " (a DOS-nak, nem a LILO-nak)\n" #: ../../diskdrake/interactive.pm_.c:1134 #, c-format msgid "Level %s\n" msgstr "%s. szint\n" #: ../../diskdrake/interactive.pm_.c:1135 #, c-format msgid "Chunk size %s\n" msgstr "A szelet mérete: %s\n" #: ../../diskdrake/interactive.pm_.c:1136 #, c-format msgid "RAID-disks %s\n" msgstr "RAID lemezek: %s\n" #: ../../diskdrake/interactive.pm_.c:1138 #, c-format msgid "Loopback file name: %s" msgstr "A loopback fájl neve: %s" #: ../../diskdrake/interactive.pm_.c:1141 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "Ez a partíció valószínűleg\n" "meghajtóknak van fenntartva,\n" "ne módosítson rajta.\n" #: ../../diskdrake/interactive.pm_.c:1144 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Ez egy speciális rendszerindítási\n" "partíció (hogy többféle operációs\n" "rendszert lehessen indítani).\n" #: ../../diskdrake/interactive.pm_.c:1163 msgid "Read-only" msgstr "Csak olvasható" #: ../../diskdrake/interactive.pm_.c:1164 #, c-format msgid "Size: %s\n" msgstr "Méret: %s\n" #: ../../diskdrake/interactive.pm_.c:1165 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometria: %s cilinder, %s fej, %s szektor\n" #: ../../diskdrake/interactive.pm_.c:1166 msgid "Info: " msgstr "Információ: " #: ../../diskdrake/interactive.pm_.c:1167 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-lemezek: %s\n" #: ../../diskdrake/interactive.pm_.c:1168 #, c-format msgid "Partition table type: %s\n" msgstr "A partíciós tábla típusa: %s\n" #: ../../diskdrake/interactive.pm_.c:1169 #, c-format msgid "on channel %d id %d\n" msgstr "csatorna: %d, id: %d\n" #: ../../diskdrake/interactive.pm_.c:1199 msgid "Filesystem encryption key" msgstr "Fájlrendszer-titkosítási kulcs" #: ../../diskdrake/interactive.pm_.c:1200 msgid "Choose your filesystem encryption key" msgstr "Válasszon fájlrendszer-titkosítási kulcsot" #: ../../diskdrake/interactive.pm_.c:1203 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Ez a titkosítási kulcs túl egyszerű (legalább %d karakter hosszúnak kell " "lennie)" #: ../../diskdrake/interactive.pm_.c:1204 msgid "The encryption keys do not match" msgstr "A titkosítási kulcsok nem egyeznek" #: ../../diskdrake/interactive.pm_.c:1207 msgid "Encryption key" msgstr "Titkosítási kulcs" #: ../../diskdrake/interactive.pm_.c:1208 msgid "Encryption key (again)" msgstr "Titkosítási kulcs (még egyszer)" #: ../../diskdrake/removable.pm_.c:47 msgid "Change type" msgstr "A típus megváltoztatása" #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "Nem sikerült bejelentkezni %s néven (helytelen jelszó?)" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 msgid "Domain Authentication Required" msgstr "Tartományi azonosítás szükséges" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Another one" msgstr "Másik" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 msgid "Which username" msgstr "Melyik felhasználónév" #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Adja meg a gép eléréséhez szükséges felhasználónevet, jelszót és " "tartománynevet." #: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477 msgid "Username" msgstr "Felhasználónév" #: ../../diskdrake/smbnfs_gtk.pm_.c:180 msgid "Domain" msgstr "Tartomány" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 msgid "Search servers" msgstr "Kiszolgálók keresése" #: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565 #: ../../fs.pm_.c:569 ../../fs.pm_.c:573 #, c-format msgid "%s formatting of %s failed" msgstr "%s formázás sikertelen a(z) %s eszközön" #: ../../fs.pm_.c:610 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Nem tudom, hogyan kell megformázni a(z) %s eszközt %s típusúra" #: ../../fs.pm_.c:684 ../../fs.pm_.c:727 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "a(z) %s partíció ide történő csatolása sikertelen: %s" #: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599 #, c-format msgid "error unmounting %s: %s" msgstr "hiba történt a(z) %s leválasztásakor: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "egyszerű" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "/usr-rel" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "kiszolgáló" #: ../../fsedit.pm_.c:240 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "Nem sikerült beolvasni a(z) %s eszköz partíciós tábláját - túl rossz\n" "állapotban van. Meg lehet próbálni a hibás partíciók törlését (MINDEN ADAT\n" "ELVÉSZ EZEKRŐL!). Ha ezt nem fogadja el, akkor a telepítő (a DrakX) nem\n" "fogja módosítani a partíciós táblát.\n" "(A hiba: %s)\n" "\n" "Törölni szeretné az összes partíciót?\n" #: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Nem lehet JFS-t használni 16 MB-nál kisebb partíción" #: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Nem lehet ReiserFS-t használni 32 MB-nál kisebb partíción" #: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "A csatlakoztatási pontoknak /-rel kell kezdődni" #: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Már van egy partíció amelynek %s a csatlakoztatási pontja\n" #: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Nem használható LVM logikai kötet a(z) %s csatlakoztatási ponthoz" #: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "Ennek a könyvtárnak a gyökér-fájlrendszeren belül kell maradnia" #: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Valódi fájlrendszert (Ext2/Ext3, ReiserFS, XFS vagy JFS) kell használni " "ennél a csatolási pontnál\n" #: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "Titkosított fájlrendszer nem használható ehhez a csatolási ponthoz: %s" #: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "Nincs elég szabad terület az automatikus helyfoglaláshoz" #: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "Nincs mit tenni" #: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "Hiba történt %s írásra való megnyitásánál: %s" #: ../../harddrake/data.pm_.c:71 msgid "cpu /* " msgstr "" #: ../../harddrake/sound.pm_.c:170 msgid "No alternative driver" msgstr "Nincs alternatív meghajtó" # a 2. %s egy drivert jelöl #: ../../harddrake/sound.pm_.c:171 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Nincs ismert OSS/ALSA alternatív meghajtó a hangkártyához (%s) - a kártya " "jelenleg ezt a meghajtót használja: \"%s\"" #: ../../harddrake/sound.pm_.c:173 msgid "Sound configuration" msgstr "Hangbeállítások" #: ../../harddrake/sound.pm_.c:174 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Itt kiválaszthat egy alternatív meghajtót (OSS vagy ALSA) a hangkártyához (%" "s)." #: ../../harddrake/sound.pm_.c:176 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "A hangkártya jelenleg a(z) %s\"%s\" meghajtót használja (a kártya " "alapértelmezett meghajtója: \"%s\")" #: ../../harddrake/sound.pm_.c:178 msgid "Driver:" msgstr "Meghajtó:" #: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303 #: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911 #: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964 #: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030 #: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078 #: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134 #: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690 msgid "Help" msgstr "Segítség" # a forrásban: # $in->ask_warn(_("Switching between ALSA and OSS help"), # _("OSS (Open Sound System) was the first sound API.... #: ../../harddrake/sound.pm_.c:185 msgid "Switching between ALSA and OSS help" msgstr "Az ALSA és az OSS - segítség" #: ../../harddrake/sound.pm_.c:186 msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independant " "sound API (it's available on most unices systems) but it's a very basic and " "limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "Az OSS (Open Sound System) volt az első hang-függvénykönyvtár. " "Operációsrendszer-független (elérhető a legtöbb UNIX-rendszeren), viszont a " "képességei korlátozottak.\n" "Hátránya az OSS-nek, hogy az ahhoz készült meghajtókban feleslegesen meg " "kell valósítani olyan funkciókat is, amelyek máshol már léteznek.\n" "\n" "Az ALSA (Advanced Linux Sound Architecture) egy modularizált architektúra, " "amely nagyszámú ISA, USB és PCI hangkártyát támogat.\n" "\n" "Az ALSA fejlettebb függvénykönyvtárt biztosít, mint az OSS.\n" "\n" "Az ALSA kétféleképpen használható:\n" " - OSS-kompatibilis üzemmódot biztosító hívásokkal;\n" " - ALSA-hívásokkal, amelyek fejlettebb funkciókat valósítanak meg, de ehhez " "szükség van az ALSA-könyvtár használatára.\n" #: ../../harddrake/sound.pm_.c:202 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oopses the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "A régi \"%s\" meghajtóval gondok lehetnek.\n" "\n" "Leállításkor problémákat okozhat a kernelben.\n" "\n" "Az új \"%s\" meghajtó csak a következő indítástól kezdve lesz használva." #: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298 msgid "Please Wait... Applying the configuration" msgstr "Egy kis türelmet kérek, végrehajtom a kért módosításokat" #: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382 #: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113 #: ../../standalone/service_harddrake_.c:64 msgid "Please wait" msgstr "Egy kis türelmet kérek" #: ../../harddrake/sound.pm_.c:210 msgid "No known driver" msgstr "Nincs ismert meghajtó" #: ../../harddrake/sound.pm_.c:211 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Nincs ismert meghajtó a hangkártyához (%s)" #: ../../harddrake/sound.pm_.c:214 msgid "Unkown driver" msgstr "Ismeretlen meghajtó" #: ../../harddrake/sound.pm_.c:215 #, c-format msgid "" "The \"%s\" driver for your sound card is unlisted\n" "\n" "Please send the output of the \"lspcidrake -v\" command to\n" "\n" "with subject: unlisted sound driver \"%s\"" msgstr "" "A hangkártya \"%s\" meghajtója nem szerepel a listában.\n" "\n" "Küldje el az \"lspcidrake -v\" parancs által produkált kimenetet\n" "a következő címre: \"install at mandrakesoft dot com\"\n" "a következő tárggyal: \"unlisted sound driver: %s\"." #: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64 msgid "Auto-detect" msgstr "Automatikus felderítés" #: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198 msgid "Unknown|Generic" msgstr "Ismeretlen|Általános" #: ../../harddrake/v4l.pm_.c:97 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Ismeretlen|CPH05X (bt878) [több gyártó]" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Ismeretlen|CPH06X (bt878) [több gyártó]" #: ../../harddrake/v4l.pm_.c:224 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" "A legtöbb modern tévékártya esetén a Linux-kernel bttv modulja automatikusan " "meghatározza a megfelelő paramétereket.\n" "Ha az Ön kártyáját a rendszer helytelenül határozta meg, akkor itt " "beállítható a megfelelő tuner- és kártyatípus. Ha szükséges, adja meg a " "tévékártya-paramétereket." #: ../../harddrake/v4l.pm_.c:227 msgid "Card model:" msgstr "Kártyatípus:" #: ../../harddrake/v4l.pm_.c:228 msgid "Tuner type:" msgstr "Tuner-típus:" #: ../../harddrake/v4l.pm_.c:229 msgid "Number of capture buffers:" msgstr "Felvételi pufferek száma:" #: ../../harddrake/v4l.pm_.c:229 msgid "number of capture buffers for mmap'ed capture" msgstr "felvételi pufferek száma mmap-es felvétel esetére" #: ../../harddrake/v4l.pm_.c:231 msgid "PLL setting:" msgstr "PLL-beállítás:" #: ../../harddrake/v4l.pm_.c:232 msgid "Radio support:" msgstr "Rádiótámogatás:" #: ../../harddrake/v4l.pm_.c:232 msgid "enable radio support" msgstr "rádiótámogatás bekapcsolása" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more this concept. But unlike \"root\", which is the\n" "administrator, the users you add here will not be entitled to change\n" "anything except their own files and their own configurations. You will have\n" "to create at least one regular user for yourself. That account is where you\n" "should log in for routine use. Although it is very practical to log in as\n" "\"root\" everyday, it may also be very dangerous! The slightest mistake\n" "could mean that your system would not work any more. If you make a serious\n" "mistake as a regular user, you may only lose some information, but not the\n" "entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course\n" "-- as you can actually enter whatever you want. DrakX will then take the\n" "first word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as the \"root\"\n" "one from a security point of view, but that is no reason to neglect it:\n" "after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of the people meant to use that computer. When you are\n" "finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default).\n" "\n" "When you are finished adding all users, you will be proposed to choose a\n" "user which can automatically log into the system when the computer boots\n" "up. If you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"Yes\".\n" "If you are not interested in this feature, click \"No\"." msgstr "" "A Linux többfelhasználós rendszer; ez azt jelenti, hogy minden\n" "felhasználónak lehetnek például külön beállításai és saját fájljai.\n" "Ezzel kapcsolatosan további információkat a felhasználói kézikönyvből\n" "lehet megtudni. A \"root\" nevű felhasználótól (ez az azonosító a\n" "rendszergazdát jelöli) eltérően az itt felvett felhasználóknak csak a\n" "saját fájljaikat és a saját beállításaikat lesz joguk módosítani.\n" "Javasolt legalább egy \"normál\" felhasználót felvenni az Ön saját\n" "használatára. Ezen normál felhasználói azonosítóval érdemes elvégezni\n" "az olyan tevékenységeket, amelyek nem igényelnek rendszergazdai\n" "jogosultságot. Bár nagyon praktikus minden alkalommal rendszergazdaként\n" "jelentkezni be, ez nagyon veszélyes is. Rendszergazdaként használva a\n" "legapróbb hiba hatására is meghibásodhat a rendszer. Ha normál\n" "felhasználóként követ el hibát, akkor esetleg elveszít bizonyos\n" "adatokat, de a rendszert nem teheti tönkre.\n" "\n" "Először is meg kell adnia a valódi nevét. Ez természetesen nem kötelező;\n" "bármit be lehet írni névként. A telepítő a megadott név első szavát\n" "ajánlja fel a \"Felhasználónév\" mezőben. Ez utóbbi az a név, amellyel\n" "az adott felhasználó be tud majd jelentkezni a rendszerbe. A felkínált név\n" "módosítható. A felhasználónév megadása után meg kell adni az ahhoz tartozó\n" "kívánt jelszót. Egy normál felhasználó jelszava biztonsági szempontból nem\n" "annyira kritikus, mint a rendszergazdáé; ez viszont nem ok arra, hogy\n" "felületesen legyen kezelve - végül is az Ön fájljairól van szó.\n" "\n" "A \"Név elfogadása\" gombbal vehető fel újabb felhasználó. Bármennyi\n" "felhasználó létrehozható. Vegyen fel egy-egy felhasználónevet mindazok\n" "számára, akik a gépet használni fogják. Amikor végzett a felhasználónevek\n" "létrehozásával, kattintson a \"Kész\" gombra.\n" "\n" "Ha a \"Speciális\" gombra kattint, módosíthatja az adott felhasználó\n" "alapértelmezett parancsértelmezőjét (alapértelmezés szerint ez a \"bash\").\n" "\n" "Miután felvette a felhasználókat, lehetősége lesz arra, hogy automatikus\n" "bejelentkezést írjon elő. Ehhez meg kell adni a gépindításkor automatikusan\n" "bejelentkeztetendő felhasználó azonosítóját. Ha használni kívánja ezt a\n" "(biztonsági kockázatot jelentő) funkciót, akkor válassza ki a kívánt\n" "felhasználói azonosítót és ablakkezelőt, majd kattintson az \"Igen\"\n" "gombra. Ellenkező esetben kattintson a \"Nem\" gombra." #: ../../help.pm_.c:48 msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Fent láthatók a lemezen talált, már létező linuxos partíciók.\n" "A varázsló javaslatai általában elfogadhatók, általános célú telepítésnél\n" "általában megfelelnek. Ha megváltoztatja a beállításokat, mindenképpen\n" "jelölje ki a gyökérpartíciót (\"/\"). Ne válassza túl kicsire, mert akkor\n" "nem lesz elég hely a szoftverek telepítéséhez. Ha külön partícióra\n" "szeretné helyezni a felhasználói adatokat, jelöljön ki egy külön \"/home\"\n" "partíciót (ez csak akkor lehetséges, ha legalább két Linux partíció\n" "létezik).\n" "\n" "A partíciók listájának mezői: \"név\", \"kapacitás\".\n" "\n" "A \"név\" képzési szabálya: \"a merevlemez típusa\", \"a lemez\n" "azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n" "\n" "\"A merevlemez típusa\" \"hd\", ha a lemez IDE-csatolós, és \"sd\",\n" "ha SCSI-csatolós.\n" "\n" "\"A lemez azonosítója\" egy betű a \"hd\" illetve az \"sd\" után.\n" "IDE-csatolós merevlemezek esetén:\n" "\n" " - \"a\" jelentése: \"első (master) meghajtó az első IDE-vezérlőn\"\n" "\n" " - \"b\" jelentése: \"második (slave) meghajtó az első IDE-vezérlőn\"\n" "\n" " - \"c\" jelentése: \"első meghajtó a második IDE-vezérlőn\"\n" "\n" " - \"d\" jelentése: \"második meghajtó a második IDE-vezérlőn\"\n" "\n" "SCSI-csatolós lemezeknél az \"a\" jelentése: \"a legalacsonyabb\n" "SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n" "SCSI-azonosító\", ..." #: ../../help.pm_.c:79 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" "A Mandrake Linux telepítőanyag több CD-n helyezkedik el. Ha egy " "kiválasztott\n" "csomag egy másik CD-n található, akkor a DrakX (a telepítő) kiadja az\n" "aktuális CD-t, és megkéri Önt, hogy helyezzen be egy másikat." #: ../../help.pm_.c:84 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewest packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful to repair or\n" "update an existing system." msgstr "" "Most meg kell adnia, mely programokat kívánja telepíteni a rendszerére.\n" "Több ezer program létezik Mandrake Linuxhoz; természetesen Önnek nem\n" "szükséges mindet ismernie.\n" "\n" "Ha szabványos telepítést végez CD-ről, akkor először meg kell adnia, mely\n" "CD-kkel rendelkezik (csak a szakértői módra igaz). Nézze át a CD-k címeit,\n" "és jelölje be az elérhető CD-ket a listában. Ha készen áll a folytatásra,\n" "kattintson az \"OK\" gombra.\n" "\n" "A csomagok a gép lehetséges felhasználási területei szerint csoportokba\n" "vannak rendezve. Maguk a csoportok négy szakaszba vannak sorolva:\n" "\n" " - \"Munkaállomás\": ha munkaállomásként tervezi használni a gépet, akkor\n" "válasszon az ennek megfelelő csoportok közül.\n" "\n" " - \"Fejlesztés\": ha a gép programozásra is lesz használva, akkor\n" "válassza ki a kívánt csoportokat.\n" "\n" " - \"Kiszolgáló\": ha a gép kiszolgálóként lesz használva, itt lehetőség\n" "van annak kiválasztására, hogy a gyakrabban használt szolgáltatások közül\n" "melyeket kívánja telepíteni a gépre.\n" "\n" " - \"Grafikus környezet\": itt választható ki a kívánt grafikus környezet.\n" "Ha grafikus munkaállomást szeretne, akkor legalább egyet ki kell\n" "választani.\n" "\n" "Ha az egérkurzort egy csoport neve fölé viszi, akkor megjelenik egy rövid\n" "magyarázat az adott csoportról. Ha telepítéskor az összes csoport\n" "kijelölését megszünteti (frissítésre ez nem vonatkozik), akkor a telepítő\n" "választási lehetőséget fog felkínálni a minimális telepítésre vonatkozóan.\n" "A következő lehetőségek választhatók:\n" "\n" " - \"X-szel együtt\": grafikus rendszer a lehető legkevesebb csomag\n" "telepítésével.\n" "\n" " - \"Alapvető dokumentációval\": az alaprendszer az alapvető programokkal\n" "és azok dokumentációjával. Megfelel például kiszolgáló telepítéséhez.\n" "\n" " - \"Valóban minimális telepítés\": a lehető legkisebb telepítés;\n" "parancssorból használható Linux rendszer. Körülbelül 65 megabájt méretű\n" "telepítés.\n" "\n" "Bejelölheti a \"Csomagok egyedi kiválasztása\" opciót; ez akkor hasznos,\n" "ha Ön ismeri a felkínált csomagokat, illetve ha teljes mértékben\n" "ellenőrizni kívánja, mi lesz a gépre feltelepítve.\n" "\n" "Ha a telepítést \"Frissítés\" üzemmódban indította el, akkor megszüntetheti\n" "akár az összes csoport kijelölését is, hogy elkerülje új programok\n" "telepítését. Ez különösen akkor lehet hasznos, ha egy meglevő rendszert\n" "kíván helyreállítani vagy frissíteni." #: ../../help.pm_.c:135 msgid "" "Finally, depending on whether or not you chose to be able to select\n" "individual packages, you will be presented a tree containing all packages\n" "classified by groups and subgroups. While browsing the tree, you can select\n" "entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An installation time estimate is displayed\n" "on the screen, to help you gauge if there is sufficient time to enjoy a cup\n" "of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of the previous step on how to\n" "create such a floppy disk." msgstr "" "Végül, attól függően, hogy kívánt-e egyedi csomagkiválasztást használni,\n" "megjelenik egy fa, amely az összes telepíthető programcsomagot tartalmazza\n" "csoportokba és alcsoportokba kategorizálva. A fa böngészése közben\n" "nem csak csomagokat jelölhet ki, hanem egész csoportokat illetve\n" "alcsoportokat is.\n" "\n" "Amikor kiválaszt egy csomagot a fában, a jobb oldalon megjelenik egy leírás\n" "az adott csomagról. Ha végzett a kijelölésekkel, kattintson a \"Telepítés\"\n" "gombra; ennek hatására megkezdődik a programok telepítése. A gép\n" "sebességétől illetve a telepítendő csomagok számától függően a folyamat\n" "jelentős időt vehet igénybe. A telepítő megjelenít egy becslést arra\n" "vonatkozóan, hogy mennyi idő van hátra a telepítés befejeztéig.\n" "\n" "Ha kiszolgálócsomagok is ki lettek választva - akár közvetlenül, akár\n" "bizonyos csoportok tagjaként -, a telepítő megerősítést kér Öntől arra\n" "vonatkozóan, hogy valóban telepíteni kívánja-e azon kiszolgálószoftvereket.\n" "A Mandrake Linux rendszerben alapértelmezésben az összes feltelepített\n" "kiszolgálóprogram elindításra kerül a rendszer indulásakor. Még ha azok\n" "biztonságosak is illetve nem rendelkeznek ismert problémákkal, akkor is\n" "előfordulhat, hogy utóbb biztonsági problémák merülnek fel velük\n" "kapcsolatban. Ha nem tudja, hogy egy bizonyos - telepítésre kijelölt -\n" "szolgáltatásnak mi a feladata illetve miért kerül telepítésre, akkor\n" "kattintson a \"Nem\" gombra. Ha az \"Igen\" gombra kattint, akkor a\n" "felsorolt szolgáltatások telepítésre kerülnek, és alapértelmezés szerint\n" "automatikusan elindításra kerülnek majd.\n" "\n" "\"Az automatikusan kijelölt csomagok mutatása\" opció bejelölésének\n" "hatására a telepítő jelezni fogja, ha automatikusan jelöl ki csomagokat\n" "telepítésre. Ilyesmi azért fordul elő, mert bizonyos függőségek miatt\n" "szükség lehet további csomagok telepítésére is.\n" "\n" "A lista alatt levő, floppylemezt ábrázoló ikon lehetővé teszi egy korábbi\n" "telepítés során elmentett csomaglista betöltését. Ezen ikonra kattintva a\n" "telepítő megkéri Önt, hogy tegyen be egy floppyt, amely egy korábbi\n" "telepítés végén készült. Ha szeretné megtudni, hogyan lehet ilyen floppyt\n" "készíteni, tekintse meg a telepítés előző lépésében szereplő második tippet." #: ../../help.pm_.c:171 msgid "" "You are now able to set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"OK\".\n" "The autodetection of network devices and modem will be launched. If this\n" "detection fails, uncheck the \"Use auto-detection\" box next time. You may\n" "also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" "Itt beállíthatja az internetkapcsolatot illetve a hálózati kapcsolatot.\n" "Ha szeretné a gépét az internetre vagy egy helyi hálózatra csatlakoztatni,\n" "akkor kattintson az \"OK\" gombra. A telepítő felderíti a hálózati\n" "eszközöket és a modemeket. Ha a felderítés nem jár sikerrel, akkor a\n" "következő alkalommal kapcsolja ki az \"Automatikus detektálás\" opciót. Ha\n" "nem kívánja beállítani a hálózatot, vagy később kívánja azt beállítani,\n" "akkor kattintson a \"Mégsem\" gombra.\n" "\n" "A lehetséges kapcsolatok: hagyományos modem, ISDN-modem, ADSL-kapcsolat,\n" "kábelmodem, egyszerű helyi hálózati (LAN) kapcsolat (Ethernet).\n" "\n" "A lehetséges beállítások itt nem kerülnek részletezésre. A szükséges\n" "paramétereket az internet-szolgáltatótól illetve a\n" "rendszeradminisztrátortól tudhatja meg.\n" "\n" "A beállításokkal kapcsolatban a felhasználói kézikönyv\n" "internetkapcsolatokkal foglalkozó fejezetéből szerezhet további\n" "információkat. A kapcsolat beállítását nem szükséges a telepítés közben\n" "elvégezni; a kézikönyv leírja, hogyan lehet azt megtenni egy feltelepített\n" "rendszeren.\n" "\n" "Ha a hálózat beállítását a telepítés után kívánja elvégezni, illetve ha\n" "befejezte a hálózati kapcsolat beállítását, akkor kattintson a \"Mégsem\"\n" "gombra." #: ../../help.pm_.c:193 msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are listed all the services available with the current installation.\n" "Review them carefully and uncheck those which are not always needed at boot\n" "time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "Most lehet kijelölni az automatikusan elindítandó szolgáltatásokat.\n" "\n" "Itt látható a jelenleg telepített összes szolgáltatás listája.\n" "Vizsgálja meg a listát alaposan, és törölje a kijelölést azok mellől,\n" "amelyek automatikus elindítására nincs szükség.\n" "\n" "Egy szolgáltatás kiválasztásakor mindig megjelenik a hozzá tartozó rövid\n" "leírás. Ha nem tudja biztosan, hogy a szolgáltatásra szükség van-e vagy\n" "sem, akkor ne változtassa meg az alapértelmezett indítási módot.\n" "\n" "Gondosan járjon el, ha a gépet kiszolgálónak fogja használni,\n" "ne indítson el egy olyan szolgáltatást sem automatikusan, amelyre nincs\n" "szükség. A feleslegesen elindított szolgáltatások biztonsági kockázatot\n" "jelentenek. Csak a tényleges feladatot ellátó szolgáltatásokat engedélyezze." #: ../../help.pm_.c:210 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" "A Linux az időt a GMT (Greenwich Mean Time) alapján kezeli - a\n" "kiválasztott időzónának megfelelő helyi időre konvertálja azt. Az\n" "időzónához való igazítás kikapcsolható \"A gép órája GMT-időt mutat\"\n" "opció kikapcsolásával - ekkor a rendszeróra szerinti idő azonos lesz a\n" "gép órája szerintivel. Ez akkor hasznos, ha van a gépen más operációs\n" "rendszer is (például Windows).\n" "\n" "Az \"Automatikus időszinkronizáció\" opció automatikusan beállítja az órát\n" "egy internetes géphez kapcsolódva. Az erre alkalmas gépek megjelenő\n" "listájából válasszon ki egy Önhöz közel levőt. Természetesen ehhez szükség\n" "van működő internetkapcsolatra. Ez a funkció feltelepít az Ön gépére\n" "egy időkiszolgálót, amelyet a helyi hálózat többi gépe is használhat." #: ../../help.pm_.c:224 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely.\n" "\n" "You will be presented the list of available resolutions and color depth\n" "available for your hardware. Choose the one that best suit your needs (you\n" "will be able to change that after installation though). When you are\n" "satisfied with the sample shown in the monitor, click \"OK\". A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen. Refer then to the video\n" "configuration section of the user guide for more information on how to\n" "configure your display." msgstr "" "Az X (teljes néven: X Window System) a Linux grafikus felületét nyújtó\n" "rendszer. A Mandrake Linuxban levő grafikus környezetek (KDE, GNOME,\n" "AfterStep, WindowMaker, ...) ezen grafikus rendszert használják.\n" "\n" "Meg fog jelenni egy lista az elérhető felbontásokról és színmélységekről.\n" "Válassza ki az igényeinek legjobban megfelelőt (telepítés után\n" "tetszőlegesen módosítható a beállítás). Ha megfelel Önnek a monitoron\n" "megjelenített mintakép, akkor fogadja el a beállításokat (egy ablaknak\n" "kell megjelennie, amelyben a telepítő megkérdi Önt, hogy az ablak\n" "látható-e).\n" "\n" "Amennyiben \"Szakértő\" módban végzi a telepítést, a telepítő elindítja\n" "az X beállítási varázslót. A varázslóval kapcsolatban további információk\n" "a kézikönyvben találhatók.\n" "\n" "Ha látható az ablakban megjelenő üzenet, akkor nyomja le az \"Igen\"\n" "gombot; a telepítő ekkor a következő lépésre ugrik. Ha viszont az üzenet\n" "nem látható, az azt jelenti, hogy a beállítás nem megfelelő. A beállítás\n" "tesztelése 10 másodperc elteltével automatikusan véget ér, a telepítő\n" "ez után visszaállítja a képernyőt a korábbi üzemmódba. A grafikus üzemmód\n" "beállításával kapcsolatban a felhasználói kézikönyvben lehet további\n" "információkat szerezni." #: ../../help.pm_.c:246 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" "Végül el kell dönteni, hogy a rendszer grafikus módban induljon-e vagy sem.\n" "A program akkor is felteszi ezt a kérdést, ha Ön kihagyta a beállítások\n" "kipróbálását. Ha a gép kiszolgálóként fog üzemelni, vagy nem sikerült\n" "beállítani a grafikus módot, akkor a \"Nem\"-et érdemes választani." #: ../../help.pm_.c:253 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (\n" "MBR) of your main disk (unless you are using another boot manager), to\n" "allow you to start up with either Windows or GNU/Linux (assuming you have\n" "Windows in your system). If you need to reinstall Windows, the Microsoft\n" "install process will rewrite the boot sector, and then you will not be able\n" "to start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" "floppy disk you will insert must be empty or contain data which you do not\n" "need. You will not have to format it since DrakX will rewrite the whole\n" "disk." msgstr "" "A Mandrake Linux CD-nek van egy beépített helyreállítási üzemmódja. Ezen\n" "üzemmód a következőképpen érhető el: indítsa a rendszert a CD-ről, majd\n" "nyomja le az \"F1\" billentyűt, és gépelje be a megjelenő parancssorban\n" "azt, hogy \"rescue\". Ha viszont a gép nem képes CD-ről való\n" "rendszerindításra, akkor vissza kell térnie ezen lépéshez segítségért - ez\n" "legalább két esetben szükséges lehet:\n" "\n" " - A rendszerbetöltő telepítésekor (hacsak Ön nem használ más\n" "rendszerindító programot) a telepítő módosítja a fő lemez\n" "betöltőszektorát (boot sector; más néven: MBR) annak érdekében, hogy\n" "többféle operációs rendszert is be lehessen tölteni (például: Linux\n" "és Windows - ha van a gépen Windows). Ha Ön újratelepíti a Windowst, akkor\n" "a Microsoft-féle telepítő át fogja írni a betöltőszektort, és emiatt Ön nem\n" "lesz képes Linuxt indítani.\n" "\n" " - Ha probléma merül fel, és Ön nem tudja elindítani a Linux rendszert\n" "a merevlemezről, akkor ezen floppy fogja jelenteni az egyetlen lehetőséget\n" "arra, hogy elindítsa a rendszert. A floppy programokat tartalmaz a rendszer\n" "helyreállításához (arra az esetre, ha például áramkimaradás történt).\n" "\n" "Ha kéri ennek a lépésnek a végrehajtását, akkor a telepítő megkéri Önt\n" "arra, hogy tegyen be egy floppyt a meghajtóba. Ügyeljen arra, hogy a\n" "floppylemezen ne legyen megőrzésre szánt adat. A lemezt nem szükséges\n" "előzetesen formázni, mivel a telepítő felülírja a teljes lemez tartalmát." #: ../../help.pm_.c:277 msgid "" "You now need to choose where you want to install the Mandrake Linux\n" "operating system on your hard drive. If your hard drive is empty or if an\n" "existing operating system is using all the available space, you will need\n" "to partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Mandrake Linux system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``Starter\n" "Guide''. From the installation interface, you can use the wizards as\n" "described here by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available.\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option. You will then be asked to choose the mount points associated to\n" "each of the partitions. The legacy mount points are selected by default,\n" "and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows partition\": if Microsoft Windows is\n" "installed on your hard drive and takes all the space available on it, you\n" "have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful -- it is a powerful but dangerous option. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing. To know how to use the DiskDrake utility used\n" "here, refer to the section ``Managing Your Partitions'' of the ````Starter\n" "Guide''''" msgstr "" "Most kell megadni, hogy a Mandrake Linux telepítése a merevlemez melyik\n" "részére történjen. Ha a lemez még teljesen üres, vagy a korábban telepített\n" "operációs rendszer(ek) miatt nincs elég szabad hely, akkor újra kell\n" "partícionálni a lemezt. A partícionálás a lemezterület logikai\n" "újrafelosztását jelenti - erre a Mandrake Linux telepítéséhez szükséges\n" "hely létrehozása érdekében van szükség.\n" "\n" "A partícionálás veszélyes művelet. Hiba esetén adatvesztéssel járhat,\n" "ráadásul általában nincs lehetőség visszatérni egy korábbi állapothoz.\n" "Emiatt kezdő felhasználóknak sok nehézséget okozhat. Ez a varázsló\n" "megkönnyíti a művelet végrehajtását, de mielőtt elindítaná, érdemes\n" "alaposan átolvasni a kézikönyv idevágó részét.\n" "\n" "Ha a telepítést szakértői módban futtatja, el fog indulni a DiskDrake nevű\n" "program, amely a Mandrake Linux rendszer partícionálóeszköze. Ezen program\n" "lehetővé teszi a partíciók módosítását. További információkat a\n" "felhasználói kézikönyv DiskDrake-ről szóló szakaszában olvashat. Az ott\n" "ismertetett varázslók a telepítőből is elindíthatók, ehhez a \"Varázsló\"\n" "gombot kell lenyomni.\n" "\n" "Ha a partíciók már definiálva vannak - akár egy korábbi telepítés által,\n" "akár egy másféle partícionálóeszköz által -, akkor egyszerűen válassza ki\n" "azokat a Linux rendszer telepítése számára.\n" "\n" "Ha a szükséges partíciók még nem állnak rendelkezésre, létre kell hozni\n" "azokat a varázslóval. A lemezek tartalmától függően többféle módon lehet\n" "eljárni:\n" "\n" " - \"A szabad terület felhasználása\": ez a lehetőség az üres meghajtók\n" "automatikus partícionálását jelenti. További kérdést nem tesz fel a\n" "telepítő.\n" "\n" " - \"Már létező partíciók használata\": a varázsló talált egy vagy több\n" "linuxos partíciót a lemezen. Ha ezeket szeretné használni a\n" "telepítéshez, válassza ezt a lehetőséget. Ezt követően meg kell adnia\n" "az ezekhez tartozó csatolási pontokat. Alapértelmezésben a korábbi\n" "állapotnak megfelelő csatolási pontok vannak megadva; általában\n" "érdemes változatlanul hagyni azokat.\n" "\n" " - \"A Windows partíción található szabad hely felhasználása\": ha a\n" "Windows úgy van feltelepítve a lemezre, hogy elfoglalja az összes\n" "elérhető területet, akkor annak egy részét fel kell szabadítani a Linux\n" "számára. Ez történhet a Windows-partíció törlésével (lásd \"A teljes\n" "lemez törlése\" és a \"Szakértői mód\" lehetőségeket) vagy\n" "átméretezésével. Az átméretezés végrehajtható a lemezen levő adatok\n" "elvesztése nélkül - feltéve, hogy azt megelőzően töredezettségmentesítve\n" "lett a Windows-partíció. Javasolt továbbá az adatok mentése is.\n" "Ezen módszer a javasolt abban az esetben, ha a Mandrake Linuxt és a\n" "Microsoft Windowst ugyanazon a gépen szeretné használni.\n" "\n" "Ha ezt a lehetőséget választja, ne feledkezzen meg arról, hogy ennek\n" "hatására a Microsoft Windows partíció mérete a mostaninál kisebb lesz,\n" "tehát a Windows használatakor kevesebb hely lesz az adatok tárolására\n" "és új szoftverek telepítésére.\n" "\n" " - \"A teljes lemez törlése\": ha minden adatot és minden partíciót\n" "törölni szeretne a lemezről, és a telepítéshez az így felszabaduló\n" "helyet szeretné használni, akkor válassza ezt a lehetőséget. Legyen\n" "nagyon óvatos ezzel a lehetőséggel, mert a lemezen levő adatok\n" "véglegesen elvesznek a megerősítés után.\n" "\n" "Ha ezt a lehetőséget választja, a lemezen levő összes adat elvész.\n" "\n" " - \"A Windows(TM) eltávolítása\": ez a funkció egyszerűen letöröl mindent\n" "a lemezről, és újrapartícionálja azt. A lemezen levő összes adat elvész.\n" "\n" "Ha ezt a lehetőséget választja, a lemezen levő összes adat elvész.\n" "\n" " - \"Szakértői mód\": ha közvetlenül (varázsló nélkül) szeretné elvégezni\n" "a partícionálást, akkor válassza ezt a lehetőséget. Legyen óvatos - sok\n" "minden elvégezhető ebben az üzemmódban, de a használata veszélyes. Könnyen\n" "elveszítheti a lemezen levő összes adatot ennek a használatával, ezért\n" "csak indokolt esetben válassza ezt a funkciót. A DiskDrake program\n" "használatáról a felhasználói kézikönyv partíciókezelésről szóló szakaszában\n" "találhat további információt." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now completed and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" "A telepítés befejeződött; a Linux rendszer készen áll a használatra.\n" "A rendszer újraindításához kattintson az \"OK\" gombra. Amikor a gép\n" "újraindul, elindíthatja a Linuxt vagy más operációs rendszert (ha több\n" "operációs rendszer van a gépen).\n" "\n" "A \"Speciális\" gomb (csak szakértői módban) lenyomására két újabb gomb\n" "jelenik meg:\n" "\n" " - \"Automatikus telepítőfloppy készítése\": olyan telepítőfloppy\n" "készítése, amelynek használatával emberi közreműködés nélkül végezhető\n" "a rendszer telepítése. Az így végzett telepítések a jelenlegi telepítés\n" "beállításait használják.\n" "\n" "Két lehetőség közül lehet választani a gomb lenyomása után:\n" "\n" " - \"Újrajátszás\". Ez részben automatizált telepítést jelent;\n" "a partícionálási lépés (csak az az egy) interaktív marad.\n" "\n" " - \"Automatikus\". Teljesen automatizált telepítés; a merevlemez\n" "tartalma felülíródik, az összes korábbi adat elvész.\n" "\n" "Ez a lehetőség jól használható akkor, amikor nagyobb számú azonos gépre\n" "kell a rendszert feltelepíteni. Az automatikus telepítéssel\n" "kapcsolatban a Mandrake honlapján találhatók további információk.\n" "\n" " - \"Csomagösszeállítás mentése\"(*): elmenti a korábban tett\n" "csomagkijelölést (a kijelölt csomagok listáját). Ha egy újabb telepítés\n" "alkalmával fel kívánja használni az elmentett listát, akkor helyezze be\n" "az azt tartalmazó floppyt a telepítés megkezdésekor, majd nyomjon\n" "\"F1\"-et, ez után pedig adja ki a következő parancsot:\n" "linux defcfg=\"floppy\"\n" "\n" "\n" "(*) Ehhez szükség lesz egy FAT fájlrendszerre formázott floppyra.\n" "A formázás Linux alatt a következő paranccsal végezhető el:\n" "\"mformat a:\"" #: ../../help.pm_.c:378 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem on it).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "Az újonnan létrehozott partíciók csak a formázásukat követően lesznek\n" "használhatók (a \"formázás\" lényegében egy fájlrendszernek a partíción\n" "való létrehozását jelenti).\n" "\n" "Most újraformázhat bizonyos, már létező partíciókat (ha azok tartalmát\n" "teljesen le kívánja törölni). Ha ezt kívánja tenni, jelölje ki azon\n" "partíciókat is.\n" "\n" "Nem szükséges újraformázni az összes, korábban létrehozott partíciót.\n" "Az operációs rendszernek szánt partíció(ka)t mindenképpen le kell formázni\n" "(például a \"/\", \"/usr\" és \"/var\" partíciókat), de a felhasználói\n" "és egyéb adatokat tartalmazó partíciókat nem szükséges újraformázni (ilyen\n" "például a \"/home\").\n" "\n" "Gondosan ellenőrizze, mely partíciókat jelöli ki, mert a formázás során az\n" "adott partíciókon levő adatok törlődnek, és később nem nyerhetők vissza.\n" "\n" "Kattintson az \"OK\" gombra a formázás megkezdéséhez.\n" "\n" "Kattintson a \"Mégsem\" gombra, ha más partícióra szeretné telepíteni a\n" "Mandrake Linux operációs rendszert.\n" "\n" "Kattintson a \"Speciális\" gombra, ha bizonyos partíciókat ellenőriztetni\n" "kíván (hibás blokkok keresése)." #: ../../help.pm_.c:404 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "A Mandrake Linux operációs rendszer telepítése folyik.\n" "A telepítendő szoftverek mennyiségétől és a gép sebességétől\n" "függően a telepítés igen sokáig eltarthat.\n" "\n" "Egy kis türelmet kérek..." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" "Lehetséges, hogy amikor Ön a Mandrake Linux rendszert telepíti, már\n" "frissítésre kerültek bizonyos csomagok a rendszer kiadása óta.\n" "Elképzelhető, hogy bizonyos hibák ki lettek javítva, illetve\n" "hogy meg lettek oldva bizonyos felmerült biztonsági problémák. Ezeket\n" "a frissítéseket Ön letöltheti az interneten keresztül.\n" "Nyomja le az \"Igen\" gombot, ha van működő internetkapcsolata. Ha viszont\n" "inkább később kívánja telepíteni a frissítéseket, akkor a \"Nem\" gombot\n" "nyomja le.\n" "\n" "Ha az \"Igen\" gombot nyomja le, akkor megjelenik egy lista azon helyekről,\n" "amelyekről a frissítések letölthetők. Válasszon közülük egy Önhöz közel " "levőt.\n" "Ezt követően egy csomagválasztási fa jelenik meg. Ha telepíteni kívánja a\n" "kijelölt csomagokat, akkor nyomja le a \"Telepítés\" gombot. Ha nem kíván\n" "csomagokat telepíteni, akkor a \"Mégsem\" gombot nyomja le." #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms included in it, click on the \"Refuse\" button which will\n" "immediately terminate the installation. To continue with the installation,\n" "click on the \"Accept\" button." msgstr "" "Mielőtt továbblépne, olvassa át alaposan a licencegyezményt, mely az\n" "egész Mandrake Linux disztribúcióra érvényes, és ha nem fogadja el\n" "valamelyik feltételt, kattintson a \"Nem fogadom el\" gombra. Ekkor a\n" "telepítés azonnal félbeszakad. A telepítés folytatásához kattintson\n" "az \"Elfogadom\" gombra." #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" "get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" "Most ki kell választani egy biztonsági szintet a gép számára. Alapszabály,\n" "hogy minél inkább elérhető a gép, illetve minél kritikusabb adatok vannak\n" "azon tárolva, annál magasabbra érdemes venni a biztonsági szintet. Magasabb\n" "szint esetén viszont általában nehézkesebb a gép használata. A szintek\n" "jelentésével kapcsolatban a kézikönyv \"msec\" fejezetében találhatók\n" "további információk.\n" "\n" "Ha nem biztos benne, hogy mit volna érdemes választani, válassza az\n" "alapértelmezés szerinti lehetőséget." #: ../../help.pm_.c:442 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create ext3 and\n" "swap partitions on your hard drive's free space;\n" "\n" "\"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy. Useful\n" "for later partition-table recovery, if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from a floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you can\n" "try to recover it using this option. Please be careful and remember that it\n" "can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your initial\n" "partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "Most kell kiválasztani a Mandrake Linux rendszer telepítéséhez használni\n" "kívánt partíciókat. Ha a kívánt partíciók már létre lettek hozva (egy\n" "korábbi Linux-telepítés vagy valamilyen partícionálási segédprogram\n" "által), akkor felhasználhatók a már létező partíciók. Ha viszont még nem\n" "léteznek, akkor először definiálni kell a partíciókat.\n" "\n" "Partíció létrehozásánál először ki kell választani egy merevlemezt.\n" "Ehhez kattintson a megfelelő azonosítóra: \"hda\" az első IDE-csatolós\n" "lemez, \"hdb\" a második; \"sda\" az első SCSI-csatolós lemez, és így\n" "tovább.\n" "\n" "A kijelölt merevlemez partícionálásánál az alábbi lehetőségek közül lehet\n" "választani:\n" "\n" " - \"Teljes törlés\": ennek hatására a kijelölt merevlemezen található\n" "összes partíció törlésre kerül.\n" "\n" " - \"Automatikus helyfoglalás\": ez lehetővé teszi Ext3 és lapozási\n" "partíciók automatikus létrehozását a rendelkezésre álló üres területen.\n" "\n" " - \"Egyéb\": hozzáférést biztosít további lehetőségekhez:\n" "\n" " - \"A partíciós tábla mentése\": a partíciós tábla mentése floppyra.\n" "A floppy használatával később - szükség esetén - helyre lehet állítani\n" "(vissza lehet tölteni) a partíciós táblát. Erősen ajánljuk, hogy használja\n" "ezt a lehetőséget.\n" "\n" " - \"Partíciós tábla visszatöltése\": egy korábban elmentett\n" "partíciós tábla visszatöltése floppyról.\n" "\n" " - \"A partíciós tábla helyreállítása\": ha a partíciós tábla\n" "megsérült, akkor ezzel lehet megpróbálni annak kijavítását. Legyen nagyon\n" "óvatos, mert a javítás nem mindig sikerül.\n" "\n" " - \"A partíciós tábla újraolvasása\": ennek hatására az összes\n" "módosítás elvész; a program ismét betölti a kiindulási partíciós táblát.\n" "\n" " - \"Cserélhető lemez automatikus csatlakoztatása\": ha nincs\n" "bejelölve ez az opció, akkor a felhasználóknak kézzel kell végezniük a\n" "cserélhető adathordozók (például CD és floppy) csatlakoztatását illetve\n" "leválasztását.\n" "\n" " - \"Varázsló\": akkor válassza ezt a lehetőséget, ha a partícionálást\n" "varázsló segítségével szeretné végrehajtani. Ha nem ismeri a\n" "partícionálás technikai részleteit, akkor érdemes ezt választania.\n" "\n" " - \"Visszavonás\": ezzel lehet a módosításokat visszavonni.\n" "\n" " - \"Átváltás normál módba\" illetve \"Átváltás szakértői módba\":\n" "szakértői módba való kapcsolás esetén több funkció válik elérhetővé\n" "(partíciótípus, opciók, formázás) és több információt kap a felhasználó.\n" "\n" " - \"Kész\": a partícionálás befejezése után ezzel lehet a módosításokat\n" "elmenteni a lemezre.\n" "\n" "Az összes funkció elérhető a billentyűzetről is. A partíciók között a Tab\n" "billentyűvel és a fel/le nyilakkal lehet mozogni.\n" "\n" "Ha egy partíció ki van jelölve, használni lehet a következőket:\n" "\n" " - Ctrl+C: új partíció létrehozása (ha üres partíció van kijelölve)\n" "\n" " - Ctrl+D: partíció törlése\n" "\n" " - Ctrl+M: csatlakoztatási (mount) pont megadása\n" "\n" "Ha információt szeretne a használható fájlrendszertípusokról, olvassa el\n" "a kézikönyv Ext2FS fájlrendszerrel foglalkozó fejezetét.\n" "\n" "Ha a telepítés egy PowerPC gépre történik, akkor érdemes létrehozni egy\n" "kisméretű HFS rendszerindítási partíciót (legalább 1 MB) a \"Yaboot\"\n" "rendszerbetöltő program számára. Ha nagyobbra veszi a partíciót (például\n" "50 MB méretűre), akkor eltárolható lesz rajta például egy tartalék kernel\n" "illetve RAM-diszk képfájlok (image-ek) esetleges rendszerhibák esetére." #: ../../help.pm_.c:513 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Egynél több Microsoft-partíciót találtam a lemezen.\n" "Válassza ki azt, amelyiket át szeretné méretezni, hogy a\n" "Mandrake Linux feltelepíthető legyen.\n" "\n" "A partíciólista a következő mezőket tartalmazza: \"linuxos név\",\n" "\"windowsos név\", \"kapacitás\".\n" "\n" "A \"linuxos név\" formátuma a következő: \"a merevlemez típusa\",\n" "\"a lemez azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n" "\n" "Ha a lemez IDE-csatolós, akkor \"a merevlemez típusa\" \"hd\",\n" "ha pedig SCSI-csatolós, akkor \"sd\".\n" "\n" "\"A lemez azonosítója\" mindig egy betű a \"hd\" illetve az \"sd\" után.\n" "IDE-csatolós meghajtók esetén:\n" "\n" " - \"a\" jelentése: \"első (master) meghajtó az első IDE-vezérlőn\"\n" "\n" " - \"b\" jelentése: \"második (slave) meghajtó az első IDE-vezérlőn\"\n" "\n" " - \"c\" jelentése: \"első meghajtó a második IDE-vezérlőn\"\n" "\n" " - \"d\" jelentése: \"második meghajtó a második IDE-vezérlőn\"\n" "\n" "SCSI-csatolós meghajtóknál az \"a\" jelentése: \"a legalacsonyabb\n" "SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n" "SCSI-azonosító\", és így tovább.\n" "\n" "A \"windowsos név\" a meghajtó Windows alatt használt azonosítója\n" "(az első lemez vagy partíció neve \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "Egy kis türelmet kérek, a művelet több percet is igénybe vehet." #: ../../help.pm_.c:547 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\") over your\n" "installation. You can also choose to do a new installation or upgrade your\n" "existing Mandrake Linux system:\n" "\n" " * \"Install\": completely wipes out the old system. However, depending on\n" "what is currently installed on your machine, you may be able to keep some\n" "old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps your\n" "hard drives' current partitions as well as user configurations. All other\n" "configuration steps remain available, similar to a normal installation;\n" "\n" " * \"Upgrade Packages Only\": this new installation class allows you to\n" "upgrade an existing Mandrake Linux system while keeping all system\n" "configurations unchanged. Adding new packages to the current installation\n" "is also possible.\n" "\n" "Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n" "or later.\n" "\n" "Depending on your GNU/Linux knowledge, select one of the following choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good GNU/Linux understanding, you may wish to\n" "perform a highly customized installation. Some of the decisions you will\n" "have to make may be difficult if you do not have good GNU/Linux knowledge,\n" "so it is not recommended that those without a fair amount of experience\n" "select this installation class." msgstr "" "Most közölnie kell a telepítővel, hogy alapértelmezés szerinti\n" "(\"Ajánlott\") telepítést szeretne-e végezni, vagy pedig nagyobb befolyást\n" "szeretne a telepítési folyamat felett (\"Szakértő\"). Választhat továbbá\n" "a következő lehetőségek közül: új telepítés illetve egy meglevő Mandrake\n" "Linux rendszer frissítése.\n" "\n" " - \"Telepítés\": a korábbi rendszer felülírásra kerül, viszont - attól\n" "függően, hogy mi található a gépen - bizonyos (linuxos vagy egyéb)\n" "partíciók változatlan tartalommal megőrizhetők.\n" "\n" " - \"Frissítés\": lehetővé teszi egy korábbi Mandrake Linux telepítés\n" "csomagjainak frissítését. A merevlemez partíciói változatlanok maradnak,\n" "a felhasználók beállításai sem módosulnak. A többi beállítási lépés\n" "elérhető marad - hasonlóan a normál telepítéshez.\n" "\n" " - \"Csak a csomagok frissítése\": lehetővé teszi egy létező Mandrake\n" "Linux rendszer frissítését a rendszerbeállítások módosítása nélkül.\n" "Lehetőség van új csomagok telepítésére is.\n" "\n" "Frissítés használata akkor javasolt, ha a számítógépen Mandrake\n" "Linux 8.1 vagy újabb kiadás van.\n" "\n" "A Linuxszal kapcsolatos ismereteitől függően válassza ki a következő\n" "lehetőségek közül a Mandrake Linux operációs rendszer telepítésének illetve\n" "frissítésének módját:\n" "\n" " - \"Ajánlott\": válassza ezt, ha még nem telepített Linux operációs\n" "rendszert. A telepítés nagyon egyszerű lesz; csak néhány kérdést fog\n" "Önnek feltenni a telepítő.\n" "\n" " - \"Szakértő\": ha több ismerettel rendelkezik a Linux rendszerrel\n" "kapcsolatban, akkor érdemes lehet ezt a telepítési módot választania.\n" "A szakértői mód lehetővé teszi, hogy Ön testreszabott telepítést\n" "végezzen. Bizonyos kérdések megválaszolása nehéz lehet, ha Ön nem\n" "rendelkezik alaposabb Linux-ismeretekkel; ezért fontolja meg, hogy\n" "ezt a lehetőséget választja-e." #: ../../help.pm_.c:582 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen). However, you might not have a keyboard that\n" "corresponds exactly to your language: for example, if you are an English\n" "speaking Swiss person, you may still want your keyboard to be a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation. In both cases, you will have to go back to\n" "this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-latin alphabet, you will be\n" "asked in the next dialog to choose the key binding that will switch the\n" "keyboard layout between the latin and non-latin layouts." msgstr "" "Normál esetben a telepítő (a DrakX) kiválasztja a megfelelő billentyűzetet\n" "(a választott nyelvtől függően). Viszont elképzelhető, hogy Önnek nem a\n" "nyelvének megfelelő billentyűzete van; például ha Ön egy angolul beszélő\n" "magyar ember, akkor lehet, hogy magyar billentyűzetkiosztást szeretne.\n" "Hasonló helyzet adódhat, ha az Ön nyelve magyar, de Ön Quebecben\n" "tartózkodik. Mindkét esetben vissza kell lépnie erre a telepítési lépésre\n" "és ki kell választania egy megfelelő billentyűzetet a listából.\n" "\n" "Hogy megjelenjen a támogatott billentyűzetek teljes listája, kattintson\n" "az \"Egyéb\" nyomógombra.\n" "\n" "Ha nem latin ábécére épülő billentyűzetkiosztást választ, akkor a\n" "következő lépésben választania kell egy billentyűkombinációt, amellyel\n" "majd a latin és a nem-latin kiosztások közt lehet váltani." #: ../../help.pm_.c:598 msgid "" "The first step is to choose your preferred language.\n" "\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you host users from Spain on your machine,\n" "select English as the main language in the tree view and in the Advanced\n" "section, click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue.\n" "\n" "To switch from one language to the other, you can launch the\n" "\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n" "language, or as a simple user to only change that user's default language." msgstr "" "Az első lépés a kívánt nyelv kiválasztása.\n" "\n" "Válassza ki a telepítéshez és a telepített rendszerhez használandó nyelvet.\n" "\n" "A \"Speciális\" nyomógombra kattintva kiválaszthatók további telepítendő\n" "nyelvek. További nyelvek választása esetén telepítésre kerülnek az adott\n" "nyelvekhez tartozó fájlok is - a rendszerdokumentáció és az alkalmazások\n" "szövegei. Ha például a gépet spanyol felhasználók is használni fogják,\n" "akkor a fő nyelvnek (például magyar) a fában történő kiválasztását követően\n" "a Speciális részben kattintson a \"Spanish|Spain\" (spanyol|Spanyolország)\n" "bejegyzéshez tartozó négyzetre.\n" "\n" "Több nyelv is telepíthető. Ha kijelölte az összes kívánt nyelvet,\n" "kattintson az \"OK\" gombra a folytatáshoz.\n" "\n" "A nyelvek közti váltáshoz a \"/usr/sbin/localedrake\" program használható.\n" "Rendszergazdai jogosultsággal az összes felhasználó nyelvbeállításait lehet\n" "módosítani, a nélkül pedig csak a saját beállításokat." #: ../../help.pm_.c:617 msgid "" "DrakX generally detects the number of buttons your mouse possesses. If not,\n" "it assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse, select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again.\n" "\n" "Sometimes, wheel mouses are not automatically detected. You will need to\n" "manually select it in the list. Be sure to select the one corresponding to\n" "the correct port it is attached to. After you have pressed the \"OK\"\n" "button, a mouse image will be displayed. You then need to move the wheel of\n" "your mouse to activate it correctly. Then test that all buttons and\n" "movements are correct." msgstr "" "A DrakX általában felismeri, hogy hány gomb van az egéren. Ha ez nem így\n" "történik, akkor azt feltételezi, hogy Ön kétgombos egérrel rendelkezik,\n" "és ez esetben beállítja a harmadik egérgomb emulálását. A program " "felismeri,\n" "hogy milyen fajtájú az egér: PS/2, soros vagy USB.\n" "\n" "Ha Ön másféle egértípust szeretne megadni, válassza ki a megfelelő típust\n" "a listából.\n" "\n" "Ha az alapértelmezettől eltérő egeret választ, akkor megjelenik egy\n" "tesztelési képernyő. Használja az egérgombokat és a görgőt, hogy\n" "ellenőrizze a beállítások helyességét. Ha az egér nem működik helyesen,\n" "akkor nyomja le a Szóköz vagy az Enter (Return) billentyűt, és válasszon\n" "egy másik fajta egeret.\n" "\n" "A görgős egereket nem mindig ismeri fel a rendszer. Ha az egér nem lett\n" "felismerve, válassza ki saját kezűleg a listából. Ügyeljen arra, hogy az\n" "egér portjának megfelelő tételt válassza ki. Miután lenyomta az \"OK\"\n" "gombot, egy egeret ábrázoló kép jelenik meg. A helyes beállításhoz\n" "mozgatni kell az egér görgőjét. Ez után letesztelhető, hogy megfelelő-e\n" "a beállítás, azaz működnek-e a gombok és a mozgatás." #: ../../help.pm_.c:638 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Válassza ki a megfelelő portot. Például a windowsos \"COM1\" port\n" "neve Linux alatt \"ttyS0\"." #: ../../help.pm_.c:642 msgid "" "This is the most crucial decision in regards with the security of your\n" "GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n" "system administrator and is the only one authorized to make updates, add\n" "users, change the overall system configuration, and so on. In short,\n" "\"root\" can do everything! That is why you must choose a password that is\n" "difficult to guess -- DrakX will tell you if it is too easy. As you can\n" "see, you can choose not to enter a password, but we strongly advise you\n" "against this if only for one reason: do not think that because you booted\n" "GNU/Linux that your other operating systems are safe from mistakes. Since\n" "\"root\" can overcome all limitations and unintentionally erase all data on\n" "partitions by carelessly accessing the partitions themselves, it is\n" "important for it to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one as \"authentication\". If you have no\n" "clue, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" "Ez a legkritikusabb pont a Linux rendszer biztonságára vonatkozóan:\n" "meg kell adni a \"root\" nevű felhasználó jelszavát. A \"root\" azonosító\n" "a rendszeradminisztrátort jelöli; ez az egyetlen olyan felhasználó,\n" "amelynek joga van rendszerfrissítést végezni, felhasználókat létrehozni,\n" "módosítani a rendszerbeállításokat illetve hasonló tevékenységeket végezni.\n" "Röviden szólva: a \"root\" felhasználó bármit megtehet a rendszeren.\n" "Ez az, amiért a jelszót úgy kell megválasztani, hogy azt minél nehezebb\n" "legyen kitalálni. A telepítő jelzi az Ön számára, ha a jelszót könnyen\n" "kitalálhatónak tartja. Nem kötelező megadni jelszót, de erősen javasolt;\n" "ha másért nem is, a következő miatt: ne gondolja, hogy ha Ön Linux\n" "rendszert indít, akkor a gépen levő többi operációs rendszer feltétlenül\n" "védve van az esetlegesen elkövetett hibáktól. A \"root\" felhasználóra nem\n" "vonatkoznak a korlátozások; ha például óvatlanul kezeli a partíciókat,\n" "akkor akár le is törölheti az azokon levő adatokat; ezért fontos, hogy\n" "a rendszeradminisztrátori azonosító védve legyen.\n" "\n" "A jelszónak betűkből és számokból kell állni, és legalább 8 karakter\n" "hosszúságúnak kell lenni. Soha ne írja le a rendszeradminisztrátori\n" "jelszót - ez veszélyt jelenthetne a rendszerre.\n" "\n" "A fentiek ellenére ne válasszon túl hosszú vagy túl bonyolult jelszót, mert\n" "Önnek fejben kell tartania azt.\n" "\n" "A jelszó nem jelenik meg a képernyőn, amikor Ön begépeli azt. Emiatt\n" "kétszer kell azt beírni - ezáltal csökken az esélye annak, hogy Ön elgépeli\n" "a jelszót. Ha esetleg ugyanazt a gépelési hibát követi el a jelszó első\n" "és második megadásánál, akkor ezen - helytelenül írt - jelszóval kell majd\n" "bejelentkezni a rendszerbe.\n" "\n" "Szakértői mód esetén a telepítő megkérdi, hogy szükség van-e azonosítási\n" "kiszolgáló (authentication server) használatára (NIS, LDAP, ...).\n" "\n" "Ha az Ön hálózata LDAP-t, NIS-t vagy PDC-t használ azonosításhoz, akkor\n" "válassza az ennek megfelelő tételt azonosítási módszerként. Ha nem tudja,\n" "hogy mit kellene megadni, kérdezze meg a rendszergazdát.\n" "\n" "Ha a számítógép nem kapcsolódik semmilyen adminisztrált hálózathoz, akkor\n" "válassza a \"Helyi fájlok\" lehetőséget." #: ../../help.pm_.c:678 msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "if in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu);\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface;\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose -- in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved for the expert user." msgstr "" "A LILO és a GRUB linuxos rendszerindító programok. Ez a fázis általában\n" "teljesen automatikus. A telepítő elemzi a lemez betöltőszektorát, és\n" "annak megfelelően cselekszik, hogy ott mit talál:\n" "\n" " - Ha windowsos betöltőszektort talál, akkor azt helyettesíteni fogja egy\n" "GRUB/LILO betöltőszektorral. Ezért Önnek lehetősége lesz arra is, hogy\n" "Linuxt indítson, és arra is, hogy egy másik operációs rendszert.\n" "\n" " - Ha GRUB vagy LILO betöltőszektort talál, helyettesíti azt egy új\n" "példánnyal.\n" "\n" "Ha a telepítő nem tud dönteni, akkor megjelenít egy párbeszédablakot\n" "különféle lehetőségekkel.\n" "\n" " - \"A használni kívánt rendszerbetöltő\": három lehetőség van:\n" "\n" " - \"GRUB\": ha a GRUB-ot szeretné használni (szöveges menü).\n" "\n" " - \"LILO, grafikus menüvel\": ha grafikus felületű LILO-t szeretne.\n" "\n" " - \"LILO, szöveges menüvel\": ha szöveges felületű LILO-t szeretne.\n" "\n" " - \"Rendszerindítási eszköz\": a legtöbb esetben nincs szükség az\n" "alapértelmezett érték (\"/dev/hda\") módosítására, de ha kívánja, a\n" "rendszerbetöltő telepíthető a második merevlemezre is (\"/dev/hdb\"),\n" "vagy akár floppylemezre is (\"/dev/fd0\").\n" "\n" " - \"Várakozási idő az alapértelmezett rendszer betöltése előtt\": a gép\n" "újraindításakor ennyi ideje van a felhasználónak a rendszerbetöltő\n" "menüjének megjelenését követően arra, hogy kiválassza, melyik rendszert\n" "kívánja elindítani (ha nem az alapértelmezettet).\n" "\n" "Legyen óvatos: ha nem telepít rendszerbetöltőt (azaz a \"Mégsem\" gombot\n" "nyomja le), akkor biztosítania kell egy másféle módszert a Mandrake Linux\n" "rendszer elindítására. Továbbá: csak akkor módosítsa az opciókat, ha biztos\n" "abban, hogy tisztában van a funkciójukkal.\n" "\n" "A párbeszédablak \"Speciális\" gombjára kattintva további opciók válnak\n" "elérhetővé - ezek a szakértő felhasználók számára lesznek lényegesek." #: ../../help.pm_.c:718 msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n" "installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "Miután beállította az általános rendszerbetöltő-paramétereket, megjelenik\n" "a betöltési lehetőségek listája, amely rendszerindításkor lesz elérhető.\n" "\n" "Ha van másik operációs rendszer a gépen, az automatikusan fel lesz véve a\n" "betöltési menübe. Itt módosíthatók az aktuális beállítások. Egy elem\n" "módosításához illetve eltávolításához jelölje ki az elemet, majd kattintson\n" "a \"Módosítás\" gombra. Új elemet a \"Hozzáadás\" funkcióval lehet\n" "felvenni. A telepítés következő lépésére való ugrás a \"Kész\" gombbal\n" "lehetséges.\n" "\n" "Ha valamelyik operációs rendszert nem akarja elérhetővé tenni, akkor\n" "törölheti annak rendszerbetöltési bejegyzéseit, de ebben az esetben\n" "később csak indítólemezzel tudja majd azt az operációs rendszert elindítani." #: ../../help.pm_.c:732 msgid "" "You must indicate where you wish to place the information required to boot\n" "GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "Itt kell megadni, hogy hová kerüljenek a Linux\n" "operációs rendszer betöltéséhez szükséges adatok.\n" "\n" "Válassza \"A lemez első szektora (MBR)\" opciót, ha\n" "nincs kizáró ok." #: ../../help.pm_.c:739 msgid "" "Here, we select a printing system for your computer. Other OSes may offer\n" "you one, but Mandrake Linux offers two.\n" "\n" " * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your first voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options." msgstr "" "Itt lehet nyomtatórendszert választani a gép számára. Más operációs\n" "rendszerekben általában csak egy van, a Mandrake Linuxban viszont kettő is.\n" "\n" " - \"pdq\": \"print, don't queue\", azaz sorba tevés nélkül történő\n" "nyomtatás. Akkor válassza ezt, ha közvetlen kapcsolat van a\n" "nyomtatóval, és nincsen hálózati nyomtatója. Ez a módszer csak a\n" "legegyszerűbb hálózati szolgáltatásokat nyújtja, és hálózaton eléggé\n" "lassú. Válassza a \"pdq\" módszert, ha nem rendelkezik komolyabb linuxos\n" "ismeretekkel. Lehetősége van arra, hogy telepítés után módosítsa ezt a\n" "beállítást; ehhez a PrinterDrake programot kell futtatni a Mandrake\n" "Vezérlőközpontban - a szakértői beállításokat kell módosítani.\n" "\n" " - \"CUPS\": \"Common UNIX Printing System\", azaz általános UNIX\n" "nyomtatórendszer. Helyi és távoli nyomtatókra való nyomtatáshoz remekül\n" "használható. Ez egy egyszerű rendszer, és képes a régi \"lpd\"\n" "nyomtatórendszer kiszolgálójaként vagy klienseként funkcionálni -\n" "vagyis kompatibilis a régebbi rendszerekkel. Nagy tudású rendszer,\n" "viszont az alapvető beállítások majdnem olyan egyszerűen elvégezhetők\n" "benne, mint a \"pdq\" esetében. Ha arra használja, hogy egy \"lpd\"\n" "kiszolgálót emuláljon vele, akkor aktiválnia kell a \"cups-lpd\"\n" "szolgáltatást. Rendelkezik grafikus felülettel, amely nyomtatásra\n" "illetve a nyomtatóparaméterek kiválasztására használható." #: ../../help.pm_.c:759 msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" "have no SCSI hardware. If you are unsure, you can check the list of\n" "hardware detected in your machine by selecting \"See hardware info\" and\n" "clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n" "button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to manually provide options to the driver." msgstr "" "A DrakX (a telepítő) most megkeresi a gépben levő IDE-eszközöket. Felderíti\n" "a PCI SCSI-kártyákat is. A program a felismert SCSI-kártyákhoz\n" "automatikusan feltelepíti a megfelelő meghajtóprogramokat.\n" "\n" "Mivel a hardverfelderítés nem mindig ismeri fel a gépben levő eszközöket,\n" "ezért a telepítő rá fog kérdezni, van-e a gépben PCI SCSI-kártya.\n" "Ha tudja, hogy van a gépben SCSI-kártya, kattintson az \"Igen\"-re.\n" "Ez esetben egy listából lehet kijelölni a kártyát. Ha nincsen SCSI\n" "hardver a gépben, akkor kattintson a \"Nem\" gombra. Ha nem biztos a\n" "válaszban, megtekintheti a megtalált hardverelemek listáját\n" "\"A hardverjellemzők megjelenítése\" funkciót kiválasztva, majd\n" "az \"OK\"-ra kattintva. Vizsgálja meg a listát, majd kattintson az\n" "\"OK\" gombra a SCSI-val kapcsolatos kérdéshez való visszatéréshez.\n" "\n" "Ha kézzel kell megadnia a kártya típusát, a telepítő megkérdezi, hogy\n" "szeretné-e megadni a kártya jellemzőit. Általában erre nincs szükség,\n" "mivel a program le tudja kérdezni a megfelelő beállításokat. A legtöbb\n" "esetben ez jól működik.\n" "\n" "Ha a telepítő nem tudja meghatározni a szükséges jellemzőket, akkor\n" "Önnek kell megadnia a meghajtóprogram paramétereit." #: ../../help.pm_.c:781 msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSes, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a filesystem check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "További bejegyzéseket lehet felvenni a Yaboot-ba, például más operációs\n" "rendszereket, további kerneleket vagy hibajavítási kernelt.\n" "\n" "Más operációs rendszereknél a bejegyzés egy címkéből és az indítási\n" "partíció nevéből áll.\n" "\n" "Linux esetén a következő beállítások lehetnek:\n" "\n" " - Címke: ezt a nevet a Yaboot-ba begépelve lehet majd elindítani a\n" "megadott operációs rendszert.\n" "\n" " - Indítófájl: a rendszer indítási fájljának neve. Általában \"vmlinux\",\n" "vagy ugyanez valamilyen kiterjesztéssel.\n" "\n" " - Gyökér: a telepített Linux rendszer gyökérpartíciója (\"/\").\n" "\n" " - Hozzáfűzés: Apple gépeknél ezt az opciót gyakran használják a\n" "videokártya inicializálásához illetve a gyakran hiányzó második és\n" "harmadik egérgomb billentyűzetről történő emulálásának beállításához.\n" "Néhány példa látható az alábbiakban:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " - Indítási RAM-diszk: a rendszerindítási eszköz elérhetővé válása előtt\n" "történő modulbetöltésre használható, továbbá indítási probléma esetén egy\n" "RAM-diszkes fájl betöltésére.\n" "\n" " - Az indítási RAM-diszk mérete: az alapértelmezett RAM-diszk-méret\n" "általában 4096 bájt. Ha nagyobb méretet szeretne, használja ezt a\n" "lehetőséget.\n" "\n" " - Írható-olvasható: általában a gyökérpartíció csatlakoztatása először\n" "csak-olvasható módban történik, hogy az aktiválás előtt ellenőrizni\n" "lehessen a fájlrendszer integritását. Itt lehet felülbírálni ezt az\n" "eljárást.\n" "\n" " - NoVideo: ha például egy Apple gép videokártyáját nem sikerül működésre\n" "bírni, válassza ezt az opciót a \"novideo\" módú indításhoz (natív\n" "framebuffer-támogatással).\n" "\n" " - Alapértelmezés: az ezzel megjelölt bejegyzés lesz az alapértelmezett\n" "operációs rendszer, melynek kiválasztásához elég megnyomni az Enter\n" "billentyűt a Yaboot-promptnál. A bejegyzés mellett megjelenik egy \"*\"\n" "karakter, ha Ön megjeleníti a lehetőségek listáját a Tab billentyűvel." #: ../../help.pm_.c:828 msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "A Yaboot egy rendszerindító program a \"NewWorld\" Macintosh gépekhez.\n" "Elindíthatók vele a gépen található Linux, MacOS és MacOS X példányok.\n" "Általában a telepítőprogram felismeri ezeket az operációs rendszereket és\n" "létrehozza a megfelelő bejegyzéseket. De ha nem így történik, akkor kézzel,\n" "utólag is létrehozható a megfelelő bejegyzés. Gondosan ellenőrizze a\n" "megadott paramétereket.\n" "\n" "A Yaboot legfontosabb paraméterei:\n" "\n" " - Indítási üzenet: egyszerű szöveges üzenet, amely az indítási prompt\n" "előtt jelenik meg.\n" "\n" " - Rendszerindítási eszköz: ezzel adható meg, hogy hova kerüljön a\n" "rendszerindításhoz szükséges információ. Általában egy előzőleg már\n" "létrehozott rendszerindítási partícióra mutat.\n" "\n" " - Késleltetés Open Firmware-nél: a LILO-tól eltérően a Yaboot-nál kétféle\n" "várakozási idő létezik. Az elsőt másodpercben mérik, és akkor érvényes,\n" "amikor a CD, az OF-betöltés, a MacOS és a Linux közül választani lehet.\n" "\n" " - Várakozási idő rendszerindításkor: ez a késleltetési idő a LILO-belihez\n" "hasonló jellegű. A Linux kiválasztása után ennyi tizedmásodpercig vár majd\n" "a program az alapértelmezett kernel betöltése előtt.\n" "\n" " - CD-ről történhet rendszerindítás?: ennek bejelölésének hatására a \"C\"\n" "is választható lesz (CD-ről való indítás) a rendszerindítási promptnál.\n" "\n" " - OF-ről történhet rendszerindítás?: ennek bejelölésének hatására az\n" "\"N\" is választható lesz (Open Firmware-ről való indítás) a\n" "rendszerindítási promptnál.\n" "\n" " - Az alapértelmezett op. rendszer?: itt lehet megadni, hogy melyik\n" "operációs rendszer induljon el az Open Firmware várakozási idejének\n" "letelte után." #: ../../help.pm_.c:860 #, fuzzy msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may (or may not), see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard. Consult the correpsonding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used at installation time;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"TV card\": if a TV card is detected on your system, it will be\n" "displayed here.\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it will be\n" "displayed here. You can click on the button to change the parameters\n" "associated to it." msgstr "" "Itt a gépének a különböző tulajdonságait láthatja. A telepített hardvertől\n" "függően a következők jelenhetnek meg:\n" "\n" " - \"Egér\": ellenőrizze a jelenlegi egérbeállításokat; a módosításukhoz\n" "kattintson a gombra.\n" "\n" " - \"Billentyűzet\": ellenőrizze a jelenlegi billentyűzet-kiosztást; a\n" "módosításához kattintson a gombra.\n" "\n" " - \"Időzóna\": a telepítő alapértelmezésben felkínál egy általa\n" "megfelelőnek tartott időzóna-beállítást, amelyet az Ön által választott\n" "nyelv alapján határoz meg. Ugyanúgy, mint a billentyűzet esetén, itt\n" "is elképzelhető, hogy Ön nem abban az országban tartózkodik, amelyre\n" "a kiválasztott nyelv alapján következtetni lehet. Ezért szükség lehet\n" "arra, hogy az \"Időzóna\" gombra kattintson - hogy az órát a megfelelő\n" "időzónához igazítsa.\n" "\n" " - \"Nyomtató\": a \"Nincs nyomtató\" gombra kattintva elindul a\n" "nyomtatóbeállítási varázsló. Nyomtatóbeállítással kapcsolatos további\n" "információkat a felhasználói kézikönyvből lehet szerezni. Az ott\n" "bemutatott felület hasonló ahhoz, ami a telepítéskor megjelenik.\n" "\n" " - \"Hangkártya\": ha a telepítő hangkártyát észlel a gépben, az itt fog\n" "megjelenni. A telepítés során nincs lehetőség ennek a módosítására.\n" "\n" " - \"Tévékártya\": ha a telepítő tévékártyát észlel a gépben, az itt\n" "fog megjelenni. A telepítés során nincs lehetőség ennek a módosítására.\n" "\n" " - \"ISDN-kártya\": ha a telepítő ISDN-kártyát észlel a gépben, az itt fog\n" "megjelenni. Ha a gombra kattint, módosíthatja a paramétereit." #: ../../help.pm_.c:891 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "Válassza ki azt a lemezt, amelyet törölni szeretne a Mandrake Linux\n" "telepítéséhez. Figyelem! A lemezen található adatok elvesznek, és\n" "később nem nyerhetők vissza!" #: ../../help.pm_.c:896 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Kattintson az \"OK\" gombra, ha a lemezen található összes adatot\n" "és partíciót törölni szeretné. Figyelem! Az \"OK\" gomb megnyomása után\n" "nincs mód a törölt adatok és partíciók visszaállítására, természetesen\n" "akkor sem, ha egy Windows-partíció törlődött.\n" "\n" "Kattintson a \"Mégsem\" gombra, ha nem kívánja végrehajtani a műveletet\n" "(a lemezen található partíciók és adatok ez esetben nem változnak)." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Nem érhetők el a megfelelő kernelmodulok (hiányzó fájl: %s). Ez általában " "azt jelenti, hogy az indítólemez nincs összhangban a telepítési médiummal. " "Készítsen egy újabb indítólemezt." #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "Meg kell formázni ezt is: %s" #: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "A következő kiszolgálóprogramo(ka)t választotta ki: %s\n" "\n" "\n" "Alapértelmezés szerint ezek lesznek aktiválva. Nem tartozik hozzájuk ismert\n" "biztonsági javítás, de újak megjelenhetnek. Ha ez bekövetkezik, akkor minél\n" "hamarabb el kell végezni a frissítést.\n" "\n" "\n" "Biztosan telepíteni szeretné a kiszolgálóprogramo(ka)t?\n" #: ../../install_any.pm_.c:441 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "A rendszerfrissítés érdekében a következő csomagok el lesznek távolítva: %s\n" "\n" "\n" "Szeretné eltávolítani ezeket a csomagokat?\n" #: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "Nem lehet broadcast-ot használni NIS tartomány nélkül" #: ../../install_any.pm_.c:879 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" "Helyezzen egy FAT fájlrendszerre formázott floppyt a(z) \"%s\" meghajtóba" #: ../../install_any.pm_.c:883 msgid "This floppy is not FAT formatted" msgstr "Ezen a floppyn nincs FAT fájlrendszer" #: ../../install_any.pm_.c:895 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Ha fel akarja később használni ezt a csomagkijelölést, akkor a telepítést " "\"linux defcfg=floppy\" paraméterrel indítsa el." #: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "Hiba a(z) %s fájl olvasása közben" #: ../../install_any.pm_.c:1040 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Hiba történt - nincs olyan meghajtó, amelyen új fájlrendszert lehetne " "létrehozni. Ellenőrizze a gépben található eszközöket." #: ../../install_interactive.pm_.c:21 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "A gép bizonyos hardverelemei speciális meghajtóprogramot igényelnek.\n" "Információk: %s" #: ../../install_interactive.pm_.c:56 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Feltétlenül kell lennie gyökérpartíciónak.\n" "Hozzon létre egy partíciót (vagy kattintson egy meglévőre).\n" "Utána adja meg csatolási pontnak a \"/\"-t." #: ../../install_interactive.pm_.c:61 msgid "You must have a swap partition" msgstr "Kell legalább egy lapozási (swap) partíció" #: ../../install_interactive.pm_.c:62 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Nincs egyetlen lapozási (swap) partíció sem.\n" "\n" "Ennek ellenére tovább szeretne lépni?" #: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Kell egy FAT partíció a /boot/efi ponthoz csatlakoztatva" #: ../../install_interactive.pm_.c:90 msgid "Use free space" msgstr "A szabad terület felhasználása" #: ../../install_interactive.pm_.c:92 msgid "Not enough free space to allocate new partitions" msgstr "Nincs elég szabad terület új partíció létrehozásához" #: ../../install_interactive.pm_.c:100 msgid "Use existing partitions" msgstr "Már létező partíciók használata" #: ../../install_interactive.pm_.c:102 msgid "There is no existing partition to use" msgstr "Nincs olyan már létező partíció, amit használhatnék" #: ../../install_interactive.pm_.c:109 msgid "Use the Windows partition for loopback" msgstr "A loopback-hez a windowsos partíció használata" #: ../../install_interactive.pm_.c:112 msgid "Which partition do you want to use for Linux4Win?" msgstr "Melyik partícióra szeretné a Linux4Win-t telepíteni?" #: ../../install_interactive.pm_.c:114 msgid "Choose the sizes" msgstr "Adja meg a méreteket" #: ../../install_interactive.pm_.c:115 msgid "Root partition size in MB: " msgstr "A gyökérpartíció mérete MB-ban: " #: ../../install_interactive.pm_.c:116 msgid "Swap partition size in MB: " msgstr "A lapozási (swap) partíció mérete MB-ban: " #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "A Windows partíción található szabad hely felhasználása" #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "Melyik partíciót szeretné átméretezni?" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "Windowsos partíció átméretezése" # msgstr "A Windows fájlrendszer bounds kiszámítása" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "A FAT-átméretező nem tudja kezelni a partíciót.\n" "A következő hiba keletkezett: %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "A windowsos partíció túlzottan töredezett. Indítsa újra a gépet Windowsszal, " "majd futtassa a \"defrag\" programot. Ennek végeztével indítsa el újra a " "Mandrake Linux telepítését." #: ../../install_interactive.pm_.c:138 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "FIGYELEM!\n" "\n" "A DrakX most átméretezi a windowsos partíciót. Ez a művelet veszélyes.\n" "Ha még nem tette meg, futtassa le a scandisk-et a windowsos partíción\n" "(esetleg a defrag programot is). Ehhez ki kell lépnie a telepítőből.\n" "Mentse le az adatokat, majd indítsa újra a telepítőt.\n" "Ha biztos abban, hogy folytatni szeretné, nyomja meg az \"OK\"-t." #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "Mekkora helyet szeretne fenntartani a Windowsnak itt:" #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "%s partíció" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "A FAT átméretezése nem sikerült: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "Nincs átméretezhető illetve loopback-ként használható FAT partíció, vagy " "nincs elég hely" #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "A teljes lemez törlése" #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "A Windows(TM) eltávolítása" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "Több merevlemeze van. Melyikre telepítsem a Linuxot?" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "MINDEN létező partíció és rajtuk minden adat elvész a(z) \"%s\" meghajtón" #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "Egyéni lemezpartícionálás" #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "Az fdisk használata" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Most partícionálható a(z) %s.\n" "Ha kész, ne feledje elmenteni a változásokat a \"w\"-vel" #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "Nincs elég szabad hely a windowsos partíción" #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "Nincs elég szabad hely a telepítéshez" #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "A DrakX partícionálási varázslója a következőket javasolja:" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "Partícionálási hiba: %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "A hálózatkezelés elindítása" #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "A hálózatkezelés leállítása" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Hiba történt, de nem tudom megfelelően lekezelni.\n" "Folytatás az Ön saját felelősségére." #: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "A következő csatolási pont kétszer van megadva: %s" #: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Néhány fontos csomagot nem tudtam telepíteni.\n" "Ez azt jelenti, hogy vagy a CD-meghajtó, vagy a CD lemez\n" "hibás. A CD lemezt egy, már feltelepített gépen a következő\n" "parancs segítségével tesztelheti le:\n" "\"rpm -qpl Mandrake/RPMS/*.rpm\"\n" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "Üdvözöljük - %s" #: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769 msgid "No floppy drive available" msgstr "Nincs elérhető floppy-meghajtó" #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "A következő lépés: \"%s\"\n" #: ../../install_steps_gtk.pm_.c:146 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "A rendszer gyenge erőforrásokkal rendelkezik. Előfordulhat, hogy problémái\n" "lesznek a Mandrake Linux telepítésével. Ha így történik, próbálkozzon\n" "szöveges módú telepítéssel: CD-ről való rendszerindítást követően nyomjon\n" "\"F1\"-et, majd írja be azt, hogy \"text\"." #: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237 msgid "Install Class" msgstr "Telepítési mód" #: ../../install_steps_gtk.pm_.c:160 msgid "Please choose one of the following classes of installation:" msgstr "Válasszon a következő telepítési osztályok közül:" #: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683 msgid "Package Group Selection" msgstr "Csomag-csoportok kiválasztása" #: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698 msgid "Individual package selection" msgstr "Csomagok egyedi kiválasztása" #: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621 #, c-format msgid "Total size: %d / %d MB" msgstr "Összméret: %d / %d MB" #: ../../install_steps_gtk.pm_.c:334 msgid "Bad package" msgstr "Hibás csomag" #: ../../install_steps_gtk.pm_.c:335 #, c-format msgid "Name: %s\n" msgstr "Név: %s\n" #: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Version: %s\n" msgstr "Verzió: %s\n" #: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Size: %d KB\n" msgstr "Méret: %d KB\n" #: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Importance: %s\n" msgstr "Fontosság: %s\n" #: ../../install_steps_gtk.pm_.c:360 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Nem választhatja ki ezt a csomagot, mert nincs elég hely a merevlemezen." #: ../../install_steps_gtk.pm_.c:365 msgid "The following packages are going to be installed" msgstr "A telepítő a következő csomagokat fogja telepíteni" #: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be removed" msgstr "A telepítő a következő csomagokat távolítja el" #: ../../install_steps_gtk.pm_.c:378 msgid "You can't select/unselect this package" msgstr "Ez a csomag nem jelölhető ki illetve nem törölhető a kijelölése" #: ../../install_steps_gtk.pm_.c:390 msgid "This is a mandatory package, it can't be unselected" msgstr "Ez egy kötelező csomag, nem lehet megszüntetni a kijelölését" #: ../../install_steps_gtk.pm_.c:392 msgid "You can't unselect this package. It is already installed" msgstr "Nem törölhető ennek a csomagnak a kijelölése, mert már telepítve van" #: ../../install_steps_gtk.pm_.c:395 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Ezt a csomagot frissíteni kell.\n" "Biztos, hogy törölni kívánja a kijelölését?" #: ../../install_steps_gtk.pm_.c:398 msgid "You can't unselect this package. It must be upgraded" msgstr "" "Nem törölheti ennek a csomagnak a kijelölését. Ez a csomag frissítendő!" #: ../../install_steps_gtk.pm_.c:403 msgid "Show automatically selected packages" msgstr "Automat. kijelölt csomagok mutatása" #: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 #: ../../standalone/drakbackup_.c:4211 msgid "Install" msgstr "Telepítés" #: ../../install_steps_gtk.pm_.c:407 msgid "Load/Save on floppy" msgstr "Betöltés/floppyra mentés" #: ../../install_steps_gtk.pm_.c:408 msgid "Updating package selection" msgstr "A csomagkiválasztás frissítése" #: ../../install_steps_gtk.pm_.c:413 msgid "Minimal install" msgstr "Minimális telepítés" #: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529 msgid "Choose the packages you want to install" msgstr "Válassza ki a telepítendő csomagokat" #: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767 msgid "Installing" msgstr "Telepítés" #: ../../install_steps_gtk.pm_.c:450 msgid "Estimating" msgstr "Becslés" #: ../../install_steps_gtk.pm_.c:457 msgid "Time remaining " msgstr "Hátralévő idő " #: ../../install_steps_gtk.pm_.c:469 msgid "Please wait, preparing installation..." msgstr "Egy kis türelmet kérek; a telepítés előkészítése folyik..." #: ../../install_steps_gtk.pm_.c:551 #, c-format msgid "%d packages" msgstr "%d csomag" #: ../../install_steps_gtk.pm_.c:556 #, c-format msgid "Installing package %s" msgstr "A(z) %s csomag telepítése" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 #: ../../standalone/drakautoinst_.c:197 msgid "Accept" msgstr "Elfogadom" #: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:791 msgid "Refuse" msgstr "Nem fogadom el" #: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Cserélje ki a CD-t a meghajtóban!\n" "\n" "Tegye be a(z) \"%s\" feliratú lemezt, és nyomja meg az \"OK\" gombot.\n" "Ha nincs ilyen lemeze, nyomja meg a \"Mégsem\" gombot, így erről a CD-ről\n" "nem történik telepítés." #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612 #: ../../install_steps_interactive.pm_.c:804 #: ../../install_steps_interactive.pm_.c:808 msgid "Go on anyway?" msgstr "Ettől függetlenül folytassam?" #: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804 msgid "There was an error ordering packages:" msgstr "Hiba történt a csomagok rendezésekor:" #: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808 msgid "There was an error installing packages:" msgstr "Hiba történt a csomagok telepítésekor:" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Figyelmeztetés\n" "\n" "Olvassa el alaposan az alábbi licencfeltételeket. Ha valamelyik részt nem\n" "fogadja el, akkor nem kezdheti el a telepítést a következő CD-ről. Ha a\n" "\"Nem fogadom el\" lehetőséget választja, akkor a telepítést ezen " "adathordozó\n" "kihagyásával kell folytatnia.\n" "\n" "\n" "A következő CD-n található néhány szoftverkomponens nem a GPL\n" "(vagy más hasonló) licenc alá tartozik. Mindegyik ilyen komponens\n" "saját, egyéni licencegyezménnyel rendelkezik.\n" "Olvassa el és fogadja el ezeket a licencfeltételeket a komponens\n" "használatba vétele vagy továbbadása előtt.\n" "Ezek a feltételek általában nem engedélyezik a komponens továbbadását,\n" "lemásolását (kivéve biztonsági másolatként), forgalomba hozását,\n" "visszafejtését, gépi kódú kilistázását, visszafordítását és módosítását.\n" "Bármelyik feltétel be nem tartása esetén a licenc érvényét veszti.\n" "Ha a licencegyezmény külön nem engedélyez többet, akkor a telepítés\n" "csak egy rendszerre engedélyezett, és a komponens nem használható\n" "közösen, a hálózaton. Ha pontosabb információra van szüksége,\n" "lépjen kapcsolatba a komponens forgalmazójával vagy készítőjével.\n" "A komponensek átadása, róluk másolat készítése harmadik fél részére\n" "általában nem engedélyezett (beleértve a dokumentációt is).\n" "\n" "\n" "A következő CD-n található komponensek minden joga azok szerzőit illeti\n" "meg, és a szoftvertermékekre vonatkozó szellemi és szerzői jogi\n" "törvények érvényesek rájuk.\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "Hiba lépett fel" #: ../../install_steps_interactive.pm_.c:85 msgid "Do you really want to leave the installation?" msgstr "Biztosan ki szeretne lépni a telepítőből?" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "Licencegyezmény" #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "Bevezetés\n" "\n" "A továbbiakban az operációs rendszerre és a Mandrake Linux disztribúcióban " "elérhető\n" "különféle komponensekre \"Szoftvertermékek\" néven hivatkozunk. A " "Szoftvertermékek körébe - nem\n" "kizárólagosan - beletartoznak az operációs rendszerhez és a Mandrake Linux " "disztribúció\n" "különféle komponenseihez kapcsolódó programok, módszerek, szabályok és " "dokumentáció.\n" "\n" "\n" "1. Licencegyezmény\n" "\n" "Kérjük, olvassa el jelen dokumentumot figyelmesen. Ezen dokumentum egy, a " "Szoftvertermékekre\n" "vonatkozó licencegyezmény Ön és a MandrakeSoft S.A. között.\n" "Ha a Szoftvertermékeket bármiféle módon telepíti, sokszorosítja vagy " "felhasználja,\n" "azzal Ön elfogadja jelen licenc kikötéseit és feltételeit, továbbá " "beleegyezik abba, hogy\n" "azoknak teljes mértékben megfelel.\n" "Ha Ön a Licenc bármely részével nem ért egyet, akkor az Ön számára nem " "engedélyezett a\n" "Szoftvertermékek telepítése, sokszorosítása illetve felhasználása.\n" "Bármely olyan kísérlet, amely a Szoftvertermékeknek a jelen licenc " "kikötéseitől és feltételeitől\n" "eltérően való telepítésére, sokszorosítására illetve felhasználására " "irányul, érvénytelenítő\n" "jellegű, és megvonja az Önnek ezen licenc által adott jogokat. A licencjogok " "megszűnését\n" "követően Önnek azonnali hatállyal meg kell semmisítenie a Szoftvertermékek " "összes, Ön által\n" "birtokolt példányát.\n" "\n" "\n" "2. Korlátozott garancia\n" "\n" "A Szoftvertermékek és az azokhoz tartozó dokumentáció \"olyan amilyen\" " "állapotban állnak\n" "rendelkezésre. Garancia nincsen azokra - a törvények által engedélyezett " "mértékben.\n" "A MandrakeSoft S.A. - a törvények által engedélyezett mértékben - semmilyen " "körülmények\n" "között sem vonható felelősségre a Szoftvertermékek használatából vagy " "használhatatlanságából\n" "származó speciális, előre nem látott, közvetlen vagy közvetett károkért " "(korlátozás nélkül\n" "beleértve a következőket: üzleti veszteség, üzleti tevékenység megszakadása, " "pénzügyi\n" "veszteség, jogi díjak illetve bírósági ítéletből származó büntetés, vagy " "bármilyen\n" "származékos veszteség); még abban az esetben sem, ha a MandrakeSoft S.A. " "tájékoztatva lett\n" "az ilyesféle károk bekövetkezésének lehetőségéről.\n" "\n" "KORLÁTOZOTT FELELŐSSÉG A BIZONYOS ORSZÁGOKBAN TILTOTT SZOFTVEREK " "BIRTOKLÁSÁVAL ILLETVE\n" "HASZNÁLATÁVAL KAPCSOLATBAN\n" "\n" "A MandrakeSoft S.A. és disztribútorai - a törvények által engedélyezett " "mértékben - semmilyen\n" "körülmények között sem vonhatók felelősségre az olyan - speciális, előre nem " "látott, közvetlen\n" "vagy közvetett - károkért (korlátozás nélkül beleértve a következőket: " "üzleti veszteség,\n" "üzleti tevékenység megszakadása, pénzügyi veszteség, jogi díjak illetve " "bírósági\n" "ítéletből származó büntetés, vagy bármilyen származékos veszteség), amely " "károk a\n" "szoftverkomponensek birtoklásából vagy használatából illetve a helyi " "törvények által\n" "tiltott vagy korlátozott szoftverkomponenseknek egy Mandrake Linux címről " "való\n" "letöltéséből származnak.\n" "Ezen korlátozott felelősség vonatkozik többek közt a Szoftvertermékekben " "levő titkosító\n" "komponensekre is.\n" "\n" "\n" "3. A GPL és az ahhoz kapcsolódó licencek\n" "\n" "A Szoftvertermékek különböző személyek és intézmények által készített " "komponensekből állnak.\n" "A legtöbb komponensre a GNU General Public Licence (GNU Általános Nyilvános " "Licenc; a\n" "továbbiakban: GPL) és hasonló licencek kikötései és feltételei vonatkoznak.\n" "Ezen licencek java része lehetővé teszi a megfelelő komponensek használatát, " "sokszorosítását,\n" "módosítását illetve terjesztését. Bármely komponens használata előtt olvassa " "el figyelmesen\n" "a komponensre vonatkozó licenc kikötéseit és feltételeit. Egy komponens " "licencére vonatkozó\n" "kérdést nem a MandrakeSoft céghez, hanem az adott komponens szerzőjéhez kell " "irányítani.\n" "A MandrakeSoft S.A. által fejlesztett programok a GPL licenc hatálya alá " "tartoznak.\n" "A MandrakeSoft S.A. által írt dokumentációs anyagokra egy speciális licenc " "vonatkozik.\n" "További részletek a dokumentációban.\n" "\n" "\n" "4. Szellemi tulajdonra vonatkozó jogok\n" "\n" "A Szoftvertermékek komponenseire vonatkozó összes jog az adott komponensek " "szerzőit illeti meg,\n" "és a szoftverekre vonatkozó szellemi tulajdoni illetve szerzői jogi " "(copyright) törvények\n" "védelme alatt áll.\n" "A MandrakeSoft S.A. fenntartja a jogot arra, hogy módosítsa illetve " "átalakítsa a\n" "Szoftvertermékeket - teljes egészében vagy részben, bármilyen módon illetve " "bármilyen célra.\n" "A \"Mandrake\", a \"Mandrake Linux\" és az azokhoz tartozó logók a " "MandrakeSoft S.A. védjegyei.\n" "\n" "\n" "5. Vonatkozó törvények\n" "\n" "Ha jelen egyezmény bármely része bírósági ítélet alapján semmisnek, " "törvénytelennek vagy\n" "alkalmazhatatlannak van nyilvánítva, akkor azon rész jelen szerződésből " "kizárásra kerül.\n" "Az egyezmény többi - alkalmazható - részét Önnek továbbra is be kell " "tartania.\n" "Jelen licenc kikötései és feltételei Franciaország törvényeinek hatálya alá " "tartoznak.\n" "A jelen licenc kikötéseivel kapcsolatos viták lezárásának legelőnyösebb " "módja egy\n" "bíróságon kívül történő megegyezés. Végső lehetőségként a vitás ügy a " "megfelelő\n" "párizsi (Franciaország) bíróságra kerül.\n" "Ha jelen dokumentummal kapcsolatban kérdése van, vegye fel a kapcsolatot a " "MandrakeSoft S.A.\n" "céggel.\n" #: ../../install_steps_interactive.pm_.c:197 msgid "Are you sure you refuse the licence?" msgstr "Biztos abban, hogy elutasítja a licencet?" #: ../../install_steps_interactive.pm_.c:217 #: ../../install_steps_interactive.pm_.c:995 #: ../../standalone/keyboarddrake_.c:25 msgid "Keyboard" msgstr "Billentyűzet" #: ../../install_steps_interactive.pm_.c:218 msgid "Please choose your keyboard layout." msgstr "Válasszon billentyűzetkiosztást." #: ../../install_steps_interactive.pm_.c:219 msgid "Here is the full list of keyboards available" msgstr "Itt található a billentyűzetek listája" #: ../../install_steps_interactive.pm_.c:237 msgid "Which installation class do you want?" msgstr "Melyik telepítési módot választja?" #: ../../install_steps_interactive.pm_.c:241 msgid "Install/Update" msgstr "Telepítés/frissítés" #: ../../install_steps_interactive.pm_.c:241 msgid "Is this an install or an update?" msgstr "Új telepítés vagy frissítés?" #: ../../install_steps_interactive.pm_.c:250 msgid "Recommended" msgstr "Ajánlott" #: ../../install_steps_interactive.pm_.c:253 #: ../../install_steps_interactive.pm_.c:256 msgid "Expert" msgstr "Szakértő" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade" msgstr "Frissítés" #: ../../install_steps_interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:265 msgid "Upgrade packages only" msgstr "Csak a csomagok frissítése" #: ../../install_steps_interactive.pm_.c:282 msgid "Please choose the type of your mouse." msgstr "Adja meg az egér típusát." #: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52 msgid "Mouse Port" msgstr "Egér port" #: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53 msgid "Please choose on which serial port your mouse is connected to." msgstr "Válassza ki, hogy melyik soros porthoz csatlakozik az egere." #: ../../install_steps_interactive.pm_.c:297 msgid "Buttons emulation" msgstr "Egérgomb-emuláció" #: ../../install_steps_interactive.pm_.c:299 msgid "Button 2 Emulation" msgstr "A 2. gomb emulálása" #: ../../install_steps_interactive.pm_.c:300 msgid "Button 3 Emulation" msgstr "A 3. gomb emulálása" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring PCMCIA cards..." msgstr "PCMCIA kártyák beállítása..." #: ../../install_steps_interactive.pm_.c:321 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:328 msgid "Configuring IDE" msgstr "IDE beállítások" #: ../../install_steps_interactive.pm_.c:328 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:345 msgid "No partition available" msgstr "Nincs elérhető partíció" #: ../../install_steps_interactive.pm_.c:348 msgid "Scanning partitions to find mount points" msgstr "Csatolási pontok keresése a partíciókon" #: ../../install_steps_interactive.pm_.c:356 msgid "Choose the mount points" msgstr "Válassza ki a csatolási pontokat" #: ../../install_steps_interactive.pm_.c:386 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Nincs elég szabad hely az 1 MB-os betöltőprogramnak! A telepítés " "folytatható, de a rendszer indításához létre kell hozni egy rendszerindító " "partíciót a DiskDrake-kel." #: ../../install_steps_interactive.pm_.c:395 msgid "No root partition found to perform an upgrade" msgstr "A gyökérpartíció nem található, ezért nem lehet elvégezni a frissítést" #: ../../install_steps_interactive.pm_.c:396 msgid "Root Partition" msgstr "Gyökérpartíció" #: ../../install_steps_interactive.pm_.c:397 msgid "What is the root partition (/) of your system?" msgstr "Melyik a gyökérpartíció (/) a rendszerben?" #: ../../install_steps_interactive.pm_.c:411 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "A partíciós tábla változásai csak a gép újraindítása után lépnek érvénybe" #: ../../install_steps_interactive.pm_.c:435 msgid "Choose the partitions you want to format" msgstr "Válassza ki a formázandó partíciókat" #: ../../install_steps_interactive.pm_.c:436 msgid "Check bad blocks?" msgstr "Ellenőrizzem a rossz blokkokat?" #: ../../install_steps_interactive.pm_.c:463 msgid "Formatting partitions" msgstr "A partíciók formázása" #: ../../install_steps_interactive.pm_.c:465 #, c-format msgid "Creating and formatting file %s" msgstr "%s fájl létrehozása és formázása" #: ../../install_steps_interactive.pm_.c:470 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" "A(z) \"%s\" fájlrendszer ellenőrzése hibákat eredményezett. Szeretné " "kijavítani a hibákat? (legyen óvatos, mivel ez adatvesztéshez is vezethet)" #: ../../install_steps_interactive.pm_.c:472 msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "A lapozóterület mérete nem elég nagy. Növelje meg a telepítés befejezéséhez." #: ../../install_steps_interactive.pm_.c:479 msgid "Looking for available packages and rebuilding rpm database..." msgstr "" "A rendelkezésre álló csomagok keresése és az RPM-adatbázis újraépítése..." #: ../../install_steps_interactive.pm_.c:480 msgid "Looking for available packages..." msgstr "A rendelkezésre álló csomagok keresése..." #: ../../install_steps_interactive.pm_.c:483 msgid "Looking at packages already installed..." msgstr "A már telepített csomagok vizsgálata..." #: ../../install_steps_interactive.pm_.c:487 msgid "Finding packages to upgrade..." msgstr "A frissítendő csomagok keresése..." #: ../../install_steps_interactive.pm_.c:505 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "A rendszeren nem maradt elég hely a telepítéshez vagy frissítéshez (%d > %d)" #: ../../install_steps_interactive.pm_.c:541 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Válasszon egy funkciót annak megfelelően, hogy betölteni kíván egy\n" "csomagkijelölést vagy a jelenlegi kijelölést szeretné elmenteni.\n" "A formátum ugyanaz, mint az automatikus telepítőfloppyknál." #: ../../install_steps_interactive.pm_.c:543 msgid "Load from floppy" msgstr "Betöltés floppyról" #: ../../install_steps_interactive.pm_.c:543 msgid "Save on floppy" msgstr "Mentés floppyra" #: ../../install_steps_interactive.pm_.c:547 msgid "Loading from floppy" msgstr "Betöltés floppyról" #: ../../install_steps_interactive.pm_.c:547 msgid "Package selection" msgstr "Csomagkijelölés" #: ../../install_steps_interactive.pm_.c:552 msgid "Insert a floppy containing package selection" msgstr "Tegye be a csomagkijelölést tartalmazó floppyt a meghajtóba" #: ../../install_steps_interactive.pm_.c:634 msgid "Selected size is larger than available space" msgstr "A kijelölt összméret nagyobb, mint a rendelkezésre álló hely" #: ../../install_steps_interactive.pm_.c:649 msgid "Type of install" msgstr "A telepítés típusa" #: ../../install_steps_interactive.pm_.c:650 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Egyetlen csomagcsoportot sem jelölt ki.\n" "Válassza ki, milyen fajta minimális telepítést szeretne." #: ../../install_steps_interactive.pm_.c:653 msgid "With X" msgstr "X-szel együtt" #: ../../install_steps_interactive.pm_.c:655 msgid "With basic documentation (recommended!)" msgstr "Alapvető dokumentációval (javasolt)" #: ../../install_steps_interactive.pm_.c:656 msgid "Truly minimal install (especially no urpmi)" msgstr "Valóban minimális telepítés (urpmi sincs)" #: ../../install_steps_interactive.pm_.c:741 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Ha a felsorolt CD-k rendelkezésre állnak, kattintson az OK gombra.\n" "Ha egy CD sem áll rendelkezésre a felsoroltak közül, akkor kattintson\n" "a Mégsem gombra.\n" "Ha a felsoroltak közül néhány CD hiányzik, törölje a kijelölésüket, majd\n" "kattintson az OK gombra." #: ../../install_steps_interactive.pm_.c:746 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "A(z) \"%s\" címkéjű CD" #: ../../install_steps_interactive.pm_.c:767 msgid "Preparing installation" msgstr "A telepítés előkészítése" #: ../../install_steps_interactive.pm_.c:776 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "A(z) %s csomag telepítése\n" "%d%%" #: ../../install_steps_interactive.pm_.c:822 msgid "Post-install configuration" msgstr "Telepítés utáni beállítások" #: ../../install_steps_interactive.pm_.c:828 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Tegye be a rendszerindító floppyt a(z) \"%s\" meghajtóba" #: ../../install_steps_interactive.pm_.c:834 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Tegye be a frissítőmodulokat tartalmazó floppyt a(z) \"%s\" meghajtóba" #: ../../install_steps_interactive.pm_.c:861 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Lehetősége van arra, hogy letöltse a disztribúció kiadása után frissített\n" "csomagokat. Ez általában biztonsági javításokat és hibajavításokat jelent.\n" "\n" "A funkció használatához szükség van egy beállított internetkapcsolatra.\n" "\n" "Szeretné feltelepíteni a frissítéseket ?" #: ../../install_steps_interactive.pm_.c:876 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Kapcsolódás a Mandrake Linux webkiszolgálójához; az elérhető " "tükörkiszolgálók listájának lekérdezése..." #: ../../install_steps_interactive.pm_.c:881 msgid "Choose a mirror from which to get the packages" msgstr "Válasszon tükörkiszolgálót, ahonnan letölti a csomagokat" #: ../../install_steps_interactive.pm_.c:890 msgid "Contacting the mirror to get the list of available packages..." msgstr "" "Kapcsolatfelvétel a tükörkiszolgálóval; az elérhető csomagok listájának " "letöltése..." #: ../../install_steps_interactive.pm_.c:918 msgid "Which is your timezone?" msgstr "Melyik időzónát választja?" #: ../../install_steps_interactive.pm_.c:923 msgid "Hardware clock set to GMT" msgstr "A gép órája GMT-időt mutat" #: ../../install_steps_interactive.pm_.c:924 msgid "Automatic time synchronization (using NTP)" msgstr "Automatikus időszinkronizáció (NTP-vel)" #: ../../install_steps_interactive.pm_.c:931 msgid "NTP Server" msgstr "NTP-kiszolgáló" #: ../../install_steps_interactive.pm_.c:965 #: ../../install_steps_interactive.pm_.c:972 msgid "Remote CUPS server" msgstr "Távoli CUPS-kiszolgáló" #: ../../install_steps_interactive.pm_.c:966 msgid "No printer" msgstr "Nincs nyomtató" #: ../../install_steps_interactive.pm_.c:982 msgid "Do you have an ISA sound card?" msgstr "Van ISA hangkártyája?" #: ../../install_steps_interactive.pm_.c:984 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "A hangkártya beállításához futtassa az \"sndconfig\" programot a telepítés " "után" #: ../../install_steps_interactive.pm_.c:986 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "A telepítő nem talált hangkártyát. Futtassa a \"harddrake\" programot a " "telepítés után" #: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27 msgid "Summary" msgstr "Összefoglalás" #: ../../install_steps_interactive.pm_.c:994 msgid "Mouse" msgstr "Egér" #: ../../install_steps_interactive.pm_.c:996 msgid "Timezone" msgstr "Időzóna" #: ../../install_steps_interactive.pm_.c:997 #: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844 msgid "Printer" msgstr "Nyomtató" #: ../../install_steps_interactive.pm_.c:999 msgid "ISDN card" msgstr "ISDN-kártya" #: ../../install_steps_interactive.pm_.c:1003 #: ../../install_steps_interactive.pm_.c:1009 msgid "Sound card" msgstr "Hangkártya" #: ../../install_steps_interactive.pm_.c:1012 msgid "TV card" msgstr "Tévékártya" #: ../../install_steps_interactive.pm_.c:1055 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1084 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1056 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1093 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1057 #: ../../install_steps_interactive.pm_.c:1080 #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1107 msgid "Windows Domain" msgstr "Windowsos tartomány" #: ../../install_steps_interactive.pm_.c:1058 #: ../../install_steps_interactive.pm_.c:1080 msgid "Local files" msgstr "Helyi fájlok" #: ../../install_steps_interactive.pm_.c:1067 #: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24 msgid "Set root password" msgstr "Rendszergazdai (root) jelszó beállítása" #: ../../install_steps_interactive.pm_.c:1069 msgid "No password" msgstr "Nincs jelszó" #: ../../install_steps_interactive.pm_.c:1074 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "Ez a jelszó túl rövid (legalább %d karakter hosszúnak kell lennie)" #: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72 #: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144 msgid "Authentication" msgstr "Felhasználóazonosítás" #: ../../install_steps_interactive.pm_.c:1088 msgid "Authentication LDAP" msgstr "LDAP-alapú azonosítás" #: ../../install_steps_interactive.pm_.c:1089 msgid "LDAP Base dn" msgstr "LDAP alap-DN" #: ../../install_steps_interactive.pm_.c:1090 msgid "LDAP Server" msgstr "LDAP-kiszolgáló" #: ../../install_steps_interactive.pm_.c:1096 msgid "Authentication NIS" msgstr "NIS-alapú azonosítás" #: ../../install_steps_interactive.pm_.c:1097 msgid "NIS Domain" msgstr "NIS-tartomány" #: ../../install_steps_interactive.pm_.c:1098 msgid "NIS Server" msgstr "NIS-kiszolgáló" #: ../../install_steps_interactive.pm_.c:1104 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Hogy ez működjön egy W2K PDC-vel, ahhoz az adminisztrátornak valószínűleg " "végre kell hajtania a következő windowsos parancsot, majd újra kell indítani " "a kiszolgálót: 'net localgroup \"Pre-Windows 2000 Compatible Access\" " "everyone /add'.\n" "Szükség lesz egy tartományadminisztrátor nevére és jelszavára is ahhoz, hogy " "a gépet csatlakoztatni lehessen a windowsos tartományhoz.\n" "Ha a hálózat még nincs beállítva, akkor a telepítő a hálózatbeállítási " "lépést követően fogja megkísérelni a tartományhoz való csatlakozást.\n" "Ha a beállítás nem sikerül, és a tartományhitelesítés nem működik, akkor a " "rendszer indítását követően futtassa az 'smbpasswd -j TARTOMÁNY -U " "FELHASZNÁLÓ%JELSZÓ' parancsot a windowsos tartomány és a megfelelő " "adminisztrátori név illetve jelszó használatával.\n" "A 'wbinfo -t' parancs használatával letesztelhető, hogy a hozzáférés " "(illetve a létrehozott gépazonosító) működik-e." #: ../../install_steps_interactive.pm_.c:1106 msgid "Authentication Windows Domain" msgstr "Hitelesítési Windows-tartomány" #: ../../install_steps_interactive.pm_.c:1108 msgid "Domain Admin User Name" msgstr "Tartományadminisztrátor felhasználói neve" #: ../../install_steps_interactive.pm_.c:1109 msgid "Domain Admin Password" msgstr "Tartományadminisztrátor jelszava" #: ../../install_steps_interactive.pm_.c:1144 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "Az indítólemez segítségével a Linux rendszer akkor is elindítható, ha a\n" "merevlemezről történő indítás nem működik. Ez például akkor hasznos, ha\n" "nem kíván rendszerindító programot telepíteni, vagy egy másik operációs\n" "rendszer eltávolította a SILO-t, vagy ha a program nem tudja lekezelni a\n" "gép hardverét. Az indítólemez a Mandrake helyreállítólemezzel is\n" "használható, hogy súlyos meghibásodás esetén a rendszer állapota könnyen\n" "visszaállítható legyen.\n" "\n" "Ha szeretne indítólemezt készíteni, helyezzen be egy floppyt az\n" "első meghajtóba és nyomja meg az \"OK\" gombot." #: ../../install_steps_interactive.pm_.c:1160 msgid "First floppy drive" msgstr "Első floppy-meghajtó" #: ../../install_steps_interactive.pm_.c:1161 msgid "Second floppy drive" msgstr "Második floppy-meghajtó" #: ../../install_steps_interactive.pm_.c:1162 #: ../../printer/printerdrake.pm_.c:2397 msgid "Skip" msgstr "Kihagyás" #: ../../install_steps_interactive.pm_.c:1167 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "Az indítólemez lehetővé teszi, hogy a Linux operációs rendszert a normál\n" "rendszerindító program nélkül is el lehessen indítani. Ez akkor hasznos,\n" "ha nem kíván LILO-t (illetve GRUB-ot) telepíteni a gépre, vagy egy másik\n" "operációs rendszer letörli a LILO-t, vagy a LILO nem működik az adott\n" "hardver-konfigurációval. Az indítólemezt használhatja a Mandrake\n" "helyreállítólemezzel együtt is, így sokkal egyszerűbb a helyreállítás egy\n" "rendszerhiba után. Szeretne most indítólemezt készíteni a rendszerhez?\n" "%s" #: ../../install_steps_interactive.pm_.c:1173 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" "\n" "\n" "(Figyelmeztetés: Mivel XFS fájlrendszert használ a gyökérpartícióhoz,\n" "ezért 1,44 megabájtos floppylemezből valószínűleg nem készíthető\n" "indítólemez - az XFS nagyméretű meghajtóprogramot igényel.)" #: ../../install_steps_interactive.pm_.c:1181 msgid "Sorry, no floppy drive available" msgstr "Nincs elérhető floppy-meghajtó" #: ../../install_steps_interactive.pm_.c:1185 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" "Válassza ki azt a floppy-meghajtót, amelyet az indítólemez elkészítéséhez " "használni kíván" #: ../../install_steps_interactive.pm_.c:1189 #, c-format msgid "Insert a floppy in %s" msgstr "Tegyen egy floppyt a(z) \"%s\" meghajtóba" #: ../../install_steps_interactive.pm_.c:1192 msgid "Creating bootdisk..." msgstr "Indítólemez készítése..." #: ../../install_steps_interactive.pm_.c:1199 msgid "Preparing bootloader..." msgstr "Rendszerbetöltő előkészítése..." #: ../../install_steps_interactive.pm_.c:1210 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" "A gép típusa feltehetően OldWorld vagy Ismeretlen,\n" "ezért a Yaboot rendszerindító program nem fog működni.\n" "A telepítés folytatható, de az indításhoz\n" "a BootX-et kell majd használni." #: ../../install_steps_interactive.pm_.c:1216 msgid "Do you want to use aboot?" msgstr "Szeretné az aboot-ot használni?" #: ../../install_steps_interactive.pm_.c:1219 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Hiba az aboot telepítésekor.\n" "Próbáljam újra a telepítést akkor is, ha ez esetleg tönkreteszi az első\n" "partíciót?" #: ../../install_steps_interactive.pm_.c:1226 msgid "Installing bootloader" msgstr "Rendszerindító program telepítése" #: ../../install_steps_interactive.pm_.c:1232 msgid "Installation of bootloader failed. The following error occured:" msgstr "A rendszerbetöltő telepítése nem sikerült. A hiba a következő:" #: ../../install_steps_interactive.pm_.c:1240 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Lehet, hogy módosítani kell az Open Firmware rendszerindítási eszköz\n" " beállításain a rendszerindító program használatához. Ha újraindítás után\n" " nem jelenik meg a prompt, nyomja le a Command-Option-O-F-et induláskor\n" " és írja be ezt: setenv boot-device %s,\\\\:tbxi\n" " Majd gépelje be ezt: shut-down\n" "A következő indítás után meg kell jelennie a promptnak." #: ../../install_steps_interactive.pm_.c:1274 #: ../../standalone/drakautoinst_.c:76 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Tegyen egy üres floppyt a(z) \"%s\" meghajtóba" #: ../../install_steps_interactive.pm_.c:1278 msgid "Creating auto install floppy..." msgstr "Automatikus telepítőfloppy készítése..." #: ../../install_steps_interactive.pm_.c:1289 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "A telepítés nem teljes, mivel egyes lépések kimaradtak.\n" "\n" "Biztos, hogy ki akar lépni?" #: ../../install_steps_interactive.pm_.c:1300 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Gratulálunk, a telepítés sikeresen befejeződött. Vegye ki az adathordozót,\n" "amiről a rendszer indítása történt (CD, floppylemez, ...), majd nyomja le\n" "az Enter billentyűt a rendszer újraindításához.\n" "\n" "Az ehhez a Mandrake Linux verzióhoz elérhető javításokról a következő\n" "helyen olvashat:\n" "\n" "\n" "%s\n" "\n" "\n" "A rendszer beállításával kapcsolatban a Mandrake Linux hivatalos\n" "felhasználói kézikönyvében talál további információkat." #: ../../install_steps_interactive.pm_.c:1313 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" #: ../../install_steps_interactive.pm_.c:1318 msgid "Generate auto install floppy" msgstr "Automatikus telepítőfloppy készítése" #: ../../install_steps_interactive.pm_.c:1320 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Az automatikus telepítés akár teljesen automatikus is lehet,\n" "ebben az esetben az egész merevlemez tartalmát módosíthatja.\n" "Elsősorban akkor ajánlott, ha másik gépre is telepíteni kívánja\n" "a rendszert.\n" "\n" "Lehetőség van a telepítés újrajátszására is.\n" #: ../../install_steps_interactive.pm_.c:1325 msgid "Automated" msgstr "Automatikus" #: ../../install_steps_interactive.pm_.c:1325 msgid "Replay" msgstr "Újrajátszás" #: ../../install_steps_interactive.pm_.c:1328 msgid "Save packages selection" msgstr "Csomagösszeállítás mentése" #: ../../install_steps_newt.pm_.c:20 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux telepítés %s" #. -PO This string must fit in a 80-char wide text screen #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" "/ lépegetés | kiválasztás | következő képernyő " #: ../../interactive.pm_.c:87 msgid "kdesu missing" msgstr "nincs \"kdesu\"" #: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100 msgid "consolehelper missing" msgstr "nincs \"consolehelper\"" #: ../../interactive.pm_.c:152 msgid "Choose a file" msgstr "Válasszon egy fájlt" #: ../../interactive.pm_.c:318 msgid "Advanced" msgstr "Speciális" #: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117 msgid "Basic" msgstr "Alapvető" #: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158 #: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434 msgid "<- Previous" msgstr "<- Előző" #: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196 #: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087 #: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143 msgid "Next" msgstr "Következő" #: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149 msgid "Bad choice, try again\n" msgstr "Nem megfelelő választás, próbálja meg újra\n" #: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150 #, c-format msgid "Your choice? (default %s) " msgstr "Melyiket választja? (az alapértelmezés: %s) " #: ../../interactive/stdio.pm_.c:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Kitöltendő bejegyzések:\n" "%s" #: ../../interactive/stdio.pm_.c:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Melyiket választja? (0/1, az alapértelmezés: \"%s\") " #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" msgstr "\"%s\" gomb: %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" msgstr "Szeretne rákattintani erre a gombra?" #: ../../interactive/stdio.pm_.c:105 msgid " enter `void' for void entry" msgstr " üres bejegyzéshez adjon meg \"void\"-ot" #: ../../interactive/stdio.pm_.c:105 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Melyiket választja? (az alapértelmezés: \"%s\"%s) " #: ../../interactive/stdio.pm_.c:123 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Sok választási lehetőség van (%s).\n" # Number is used to designate approximately the range of entries # you wish to edit because all of them would not fit on-screen. #: ../../interactive/stdio.pm_.c:126 msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Jelölje ki a szerkeszteni kívánt 10-es tartomány első számát,\n" "vagy csak nyomja le az Enter billentyűt a továbblépéshez.\n" "Melyiket választja? " #: ../../interactive/stdio.pm_.c:139 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Megjegyzés: egy címke módosult:\n" "%s" #: ../../interactive/stdio.pm_.c:146 msgid "Re-submit" msgstr "Újraküldés" #: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188 msgid "Czech (QWERTZ)" msgstr "cseh (QWERTZ)" #: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190 msgid "German" msgstr "német" #: ../../keyboard.pm_.c:155 msgid "Dvorak" msgstr "Dvorak-féle" #: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Spanish" msgstr "spanyol" #: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "Finnish" msgstr "finn" #: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200 msgid "French" msgstr "francia" #: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233 msgid "Norwegian" msgstr "norvég" #: ../../keyboard.pm_.c:160 msgid "Polish" msgstr "lengyel" #: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241 msgid "Russian" msgstr "orosz" #: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243 msgid "Swedish" msgstr "svéd" #: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259 msgid "UK keyboard" msgstr "angol (UK) billentyűzet" #: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260 msgid "US keyboard" msgstr "USA-billentyűzet" #: ../../keyboard.pm_.c:167 msgid "Albanian" msgstr "albán" #: ../../keyboard.pm_.c:168 msgid "Armenian (old)" msgstr "örmény (régi)" #: ../../keyboard.pm_.c:169 msgid "Armenian (typewriter)" msgstr "örmény (írógép)" #: ../../keyboard.pm_.c:170 msgid "Armenian (phonetic)" msgstr "örmény (fonetikus)" #: ../../keyboard.pm_.c:175 msgid "Azerbaidjani (latin)" msgstr "azerbajdzsáni (latin)" #: ../../keyboard.pm_.c:177 msgid "Belgian" msgstr "belga" #: ../../keyboard.pm_.c:178 msgid "Bengali" msgstr "bengáli" #: ../../keyboard.pm_.c:179 msgid "Bulgarian (phonetic)" msgstr "bolgár (fonetikus)" #: ../../keyboard.pm_.c:180 msgid "Bulgarian (BDS)" msgstr "bolgár (BDS)" #: ../../keyboard.pm_.c:181 msgid "Brazilian (ABNT-2)" msgstr "brazil (ABNT-2)" #: ../../keyboard.pm_.c:184 msgid "Bosnian" msgstr "boszniai" #: ../../keyboard.pm_.c:185 msgid "Belarusian" msgstr "fehérorosz" #: ../../keyboard.pm_.c:186 msgid "Swiss (German layout)" msgstr "svájci (német kiosztás)" #: ../../keyboard.pm_.c:187 msgid "Swiss (French layout)" msgstr "svájci (francia kiosztás)" #: ../../keyboard.pm_.c:189 msgid "Czech (QWERTY)" msgstr "cseh (QWERTY)" #: ../../keyboard.pm_.c:191 msgid "German (no dead keys)" msgstr "német (\"dead key\" nélkül)" #: ../../keyboard.pm_.c:192 msgid "Devanagari" msgstr "devanagari" #: ../../keyboard.pm_.c:193 msgid "Danish" msgstr "dán" #: ../../keyboard.pm_.c:194 msgid "Dvorak (US)" msgstr "Dvorak-féle (USA)" #: ../../keyboard.pm_.c:195 msgid "Dvorak (Norwegian)" msgstr "Dvorak-féle (norvég)" #: ../../keyboard.pm_.c:196 msgid "Dvorak (Swedish)" msgstr "Dvorak-féle (svéd)" #: ../../keyboard.pm_.c:197 msgid "Estonian" msgstr "észt" #: ../../keyboard.pm_.c:201 msgid "Georgian (\"Russian\" layout)" msgstr "grúz (\"orosz\" kiosztás)" #: ../../keyboard.pm_.c:202 msgid "Georgian (\"Latin\" layout)" msgstr "grúz (\"latin\" kiosztás)" #: ../../keyboard.pm_.c:203 msgid "Greek" msgstr "görög" #: ../../keyboard.pm_.c:204 msgid "Gujarati" msgstr "gudzsarati" #: ../../keyboard.pm_.c:205 msgid "Gurmukhi" msgstr "gurmukhi" #: ../../keyboard.pm_.c:206 msgid "Hungarian" msgstr "magyar" #: ../../keyboard.pm_.c:207 msgid "Croatian" msgstr "horvát" #: ../../keyboard.pm_.c:208 msgid "Israeli" msgstr "izraeli" #: ../../keyboard.pm_.c:209 msgid "Israeli (Phonetic)" msgstr "izraeli (fonetikus)" #: ../../keyboard.pm_.c:210 msgid "Iranian" msgstr "iráni" #: ../../keyboard.pm_.c:211 msgid "Icelandic" msgstr "izlandi" #: ../../keyboard.pm_.c:212 msgid "Italian" msgstr "olasz" #: ../../keyboard.pm_.c:213 msgid "Inuktitut" msgstr "inuktitut" #: ../../keyboard.pm_.c:214 msgid "Japanese 106 keys" msgstr "japán 106-billentyűs" #: ../../keyboard.pm_.c:217 msgid "Korean keyboard" msgstr "koreai billentyűzet" #: ../../keyboard.pm_.c:218 msgid "Latin American" msgstr "latin-amerikai" #: ../../keyboard.pm_.c:219 msgid "Laotian" msgstr "laoszi" #: ../../keyboard.pm_.c:220 msgid "Lithuanian AZERTY (old)" msgstr "litván AZERTY (régi)" #: ../../keyboard.pm_.c:222 msgid "Lithuanian AZERTY (new)" msgstr "litván AZERTY (új)" #: ../../keyboard.pm_.c:223 msgid "Lithuanian \"number row\" QWERTY" msgstr "litván \"számsor\" QWERTY" #: ../../keyboard.pm_.c:224 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "litván \"fonetikus\" QWERTY" #: ../../keyboard.pm_.c:225 msgid "Latvian" msgstr "lett" #: ../../keyboard.pm_.c:226 msgid "Malayalam" msgstr "" #: ../../keyboard.pm_.c:227 msgid "Macedonian" msgstr "macedón" #: ../../keyboard.pm_.c:228 msgid "Myanmar (Burmese)" msgstr "myanmar (burmai)" #: ../../keyboard.pm_.c:229 msgid "Mongolian (cyrillic)" msgstr "mongol (cirill)" #: ../../keyboard.pm_.c:230 msgid "Maltese (UK)" msgstr "máltai (UK)" #: ../../keyboard.pm_.c:231 msgid "Maltese (US)" msgstr "máltai (US)" #: ../../keyboard.pm_.c:232 msgid "Dutch" msgstr "holland" #: ../../keyboard.pm_.c:234 msgid "Polish (qwerty layout)" msgstr "lengyel (qwerty)" #: ../../keyboard.pm_.c:235 msgid "Polish (qwertz layout)" msgstr "lengyel (qwertz)" #: ../../keyboard.pm_.c:236 msgid "Portuguese" msgstr "portugál" #: ../../keyboard.pm_.c:237 msgid "Canadian (Quebec)" msgstr "kanadai (Quebec)" #: ../../keyboard.pm_.c:239 msgid "Romanian (qwertz)" msgstr "román (qwertz)" #: ../../keyboard.pm_.c:240 msgid "Romanian (qwerty)" msgstr "román (qwerty)" #: ../../keyboard.pm_.c:242 msgid "Russian (Yawerty)" msgstr "orosz (Yawerty)" #: ../../keyboard.pm_.c:244 msgid "Slovenian" msgstr "szlovén" #: ../../keyboard.pm_.c:245 msgid "Slovakian (QWERTZ)" msgstr "szlovák (QWERTZ)" #: ../../keyboard.pm_.c:246 msgid "Slovakian (QWERTY)" msgstr "szlovák (QWERTY)" #: ../../keyboard.pm_.c:248 msgid "Serbian (cyrillic)" msgstr "szerb (cirill)" #: ../../keyboard.pm_.c:250 msgid "Tamil (Unicode)" msgstr "tamil (Unicode)" #: ../../keyboard.pm_.c:251 msgid "Tamil (TSCII)" msgstr "tamil (TSCII)" #: ../../keyboard.pm_.c:252 msgid "Thai keyboard" msgstr "thaiföldi billentyűzet" #: ../../keyboard.pm_.c:254 msgid "Tajik keyboard" msgstr "tádzsik billentyűzet" #: ../../keyboard.pm_.c:255 msgid "Turkish (traditional \"F\" model)" msgstr "török (hagyományos \"F\" modell)" #: ../../keyboard.pm_.c:256 msgid "Turkish (modern \"Q\" model)" msgstr "török (modern \"Q\" modell)" #: ../../keyboard.pm_.c:258 msgid "Ukrainian" msgstr "ukrán" #: ../../keyboard.pm_.c:261 msgid "US keyboard (international)" msgstr "USA-billentyűzet (nemzetközi)" #: ../../keyboard.pm_.c:262 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "vietnámi \"számsor\" QWERTY" #: ../../keyboard.pm_.c:263 msgid "Yugoslavian (latin)" msgstr "jugoszláv (latin)" #: ../../keyboard.pm_.c:270 msgid "Right Alt key" msgstr "Jobb Alt gomb" #: ../../keyboard.pm_.c:271 msgid "Both Shift keys simultaneously" msgstr "A két Shift gomb egyszerre" #: ../../keyboard.pm_.c:272 msgid "Control and Shift keys simultaneously" msgstr "Control és Shift gombok egyszerre" #: ../../keyboard.pm_.c:273 msgid "CapsLock key" msgstr "CapsLock gomb" #: ../../keyboard.pm_.c:274 msgid "Ctrl and Alt keys simultaneously" msgstr "Ctrl és Alt gombok egyszerre" #: ../../keyboard.pm_.c:275 msgid "Alt and Shift keys simultaneously" msgstr "Alt és Shift gombok egyszerre" #: ../../keyboard.pm_.c:276 msgid "\"Menu\" key" msgstr "\"Menu\" gomb" #: ../../keyboard.pm_.c:277 msgid "Left \"Windows\" key" msgstr "Bal \"Windows\" gomb" #: ../../keyboard.pm_.c:278 msgid "Right \"Windows\" key" msgstr "Jobb \"Windows\" gomb" #: ../../loopback.pm_.c:32 #, c-format msgid "Circular mounts %s\n" msgstr "Körkörös csatlakoztatás - %s\n" #: ../../lvm.pm_.c:103 msgid "Remove the logical volumes first\n" msgstr "Először törölje az összes logikai kötetet\n" #: ../../modules.pm_.c:290 msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" "A 2.2-es kernelekhez nincsen PCMCIA-támogatás. Használjon 2.4-es kernelt." #: ../../modules/interactive.pm_.c:16 msgid "You can configure each parameter of the module here." msgstr "A modul összes paramétere beállítható itt." #: ../../modules/parameters.pm_.c:18 #, fuzzy msgid "modinfo is not available" msgstr "Nincs elérhető floppy-meghajtó" #: ../../modules/parameters.pm_.c:50 msgid "a number" msgstr "egy szám" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated numbers" msgstr "%d darab, vesszővel elválasztott szám" #: ../../modules/parameters.pm_.c:52 #, c-format msgid "%d comma separated strings" msgstr "%d darab, vesszővel elválasztott sztring" #: ../../modules/parameters.pm_.c:54 msgid "comma separated numbers" msgstr "vesszővel elválasztott számok" #: ../../modules/parameters.pm_.c:54 msgid "comma separated strings" msgstr "vesszővel elválasztott sztringek" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun egér" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 msgid "Generic PS2 Wheel Mouse" msgstr "Általános PS/2-es görgős egér" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "1 gombos" #: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "Általános 2 gombos egér" #: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "Görgős" #: ../../mouse.pm_.c:51 msgid "serial" msgstr "Soros" #: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "Általános 3 gombos egér" #: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (soros, régi C7 típus)" #: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "busmouse" #: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 gombos" #: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 gombos" #: ../../mouse.pm_.c:75 msgid "none" msgstr "egyik sem" #: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "nincs egér" #: ../../mouse.pm_.c:490 msgid "Please test the mouse" msgstr "Az egér letesztelése" #: ../../mouse.pm_.c:491 msgid "To activate the mouse," msgstr "Az egér aktiválásához " #: ../../mouse.pm_.c:492 msgid "MOVE YOUR WHEEL!" msgstr "MOZGASSA AZ EGÉRGÖRGŐT!" #: ../../my_gtk.pm_.c:65 msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" #: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435 msgid "Finish" msgstr "Befejezés" #: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057 #: ../../ugtk2.pm_.c:435 msgid "Next ->" msgstr "Következő ->" #: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926 msgid "Is this correct?" msgstr "Elfogadja?" #: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011 msgid "Info" msgstr "Információ" #: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036 msgid "Expand Tree" msgstr "A fa kibontása" #: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037 msgid "Collapse Tree" msgstr "A fa összecsukása" #: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038 msgid "Toggle between flat and group sorted" msgstr "Váltás sima és csoportok szerint rendezett nézet között" #: ../../network/adsl.pm_.c:23 msgid "use pppoe" msgstr "PPPOE használata" #: ../../network/adsl.pm_.c:24 msgid "use pptp" msgstr "PPTP használata" #: ../../network/adsl.pm_.c:25 msgid "use dhcp" msgstr "DHCP használata" #: ../../network/adsl.pm_.c:26 msgid "Alcatel speedtouch usb" msgstr "Alcatel Speed Touch USB" #: ../../network/adsl.pm_.c:27 msgid "Sagem (using pppoe) usb" msgstr "" #: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36 msgid "Connect to the Internet" msgstr "Csatlakozás az internethez" #: ../../network/adsl.pm_.c:30 msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few ones use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Az ADSL-en keresztüli csatlakozás legtöbbször PPPOE-vel történik,\n" "de előfordul a PPTP és a DHCP is.\n" "A PPPOE-t válassza, ha nem biztos a válaszban." #: ../../network/adsl.pm_.c:166 msgid "" "You need the alcatel microcode.\n" "Download it at\n" "http://www.speedtouchdsl.com/dvrreg_lx.htm\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../network/drakfirewall.pm_.c:12 msgid "Web Server" msgstr "Webkiszolgáló" #: ../../network/drakfirewall.pm_.c:17 msgid "Domain Name Server" msgstr "Tartománynév-kiszolgáló" #: ../../network/drakfirewall.pm_.c:32 msgid "Mail Server" msgstr "Email-kiszolgáló" #: ../../network/drakfirewall.pm_.c:37 msgid "POP and IMAP Server" msgstr "POP- és IMAP-kiszolgáló" #: ../../network/drakfirewall.pm_.c:111 msgid "No network card" msgstr "Hálózati kártya nem található" #: ../../network/drakfirewall.pm_.c:129 msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "A DrakFirewall beállítása\n" "\n" "Ezzel egy személyes felhasználásra szánt tűzfalat lehet beállítani ehhez\n" "a Mandrake Linuxt használó géphez. Ha egy komolyabb tűzfalmegoldást\n" "szeretne, szerezze be a speciális MandrakeSecurity Firewall disztribúciót." #: ../../network/drakfirewall.pm_.c:135 msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "A DrakFirewall beállítása\n" "\n" "Mielőtt továbblépne, állítsa be a hálózat- illetve internetelérést\n" "a DrakConnect programmal (ha ez még nem történt meg)." #: ../../network/drakfirewall.pm_.c:152 msgid "Which services would you like to allow the Internet to connect to?" msgstr "Mely szolgáltatásokat kívánja elérhetővé tenni az internet felé?" #: ../../network/drakfirewall.pm_.c:153 msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "Többféle portot is megadhat.\n" "Példák: 139/tcp 139/udp.\n" "További információ a /etc/services fájlban." #: ../../network/drakfirewall.pm_.c:159 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" "Helytelen port lett megadva: %s.\n" "A helyes formátum: \"port/tcp\" vagy \"port/udp\",\n" "ahol a \"port\" egy 1 és 65535 közti szám." #: ../../network/drakfirewall.pm_.c:167 msgid "Everything (no firewall)" msgstr "Minden (nincs tűzfal)" #: ../../network/drakfirewall.pm_.c:169 msgid "Other ports" msgstr "Egyéb portok" #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcp-client" msgstr "" "Melyik DHCP-klienst szeretné használni?\n" "Az alapértelmezés: dhcp-client" #: ../../network/ethernet.pm_.c:88 msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Nem található Ethernet hálózati kártya a rendszerben.\n" "Nem tudom beállítani ezt a kapcsolattípust." #: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234 msgid "Choose the network interface" msgstr "Hálózati csatoló kiválasztása" #: ../../network/ethernet.pm_.c:93 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "Válassza ki, hogy melyik hálózati adapteren keresztül szeretne csatlakozni " "az internetre." #: ../../network/ethernet.pm_.c:176 msgid "no network card found" msgstr "nem találtam hálózati kártyát" #: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349 msgid "Configuring network" msgstr "Hálózat beállítása" #: ../../network/ethernet.pm_.c:201 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "Most adja meg a gép nevét (ha ismeri).\n" "Néhány DHCP-kiszolgáló csak a gépnév megadása után használható.\n" "A teljes nevet kell beírni, például: \"gep.vallalat.hu\"." #: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354 msgid "Host name" msgstr "Gépnév" #: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44 #: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103 #: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171 #: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245 #: ../../network/netconnect.pm_.c:253 msgid "Network Configuration Wizard" msgstr "Hálózatbeállító varázsló" #: ../../network/isdn.pm_.c:22 msgid "External ISDN modem" msgstr "Külső ISDN-modem" #: ../../network/isdn.pm_.c:22 msgid "Internal ISDN card" msgstr "Belső ISDN-kártya" #: ../../network/isdn.pm_.c:22 msgid "What kind is your ISDN connection?" msgstr "Milyen típusú az ISDN-kapcsolat?" #: ../../network/isdn.pm_.c:45 msgid "" "Which ISDN configuration do you prefer?\n" "\n" "* The Old configuration uses isdn4net. It contains powerful\n" " tools, but is tricky to configure, and not standard.\n" "\n" "* The New configuration is easier to understand, more\n" " standard, but with less tools.\n" "\n" "We recommand the light configuration.\n" msgstr "" "Milyen típusú ISDN-beállításokat szeretne használni?\n" "\n" " - A régi típusú beállítás az isdn4net-re épül. Ez igen hatékony\n" "eszközöket tartalmaz, de beállítása nehézkes, és nem szabványos.\n" "\n" " - Az új típusú beállítás könnyen átlátható, szabványos,\n" "de kevesebb segédeszköz tartozik hozzá.\n" "\n" "Ha nincs kizáró ok, akkor inkább az utóbbit válassza.\n" #: ../../network/isdn.pm_.c:54 msgid "New configuration (isdn-light)" msgstr "Új beállítás (isdn-light)" #: ../../network/isdn.pm_.c:54 msgid "Old configuration (isdn4net)" msgstr "Régi beállítás (isdn4net)" #: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184 #: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202 #: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219 msgid "ISDN Configuration" msgstr "ISDN-beállítások" #: ../../network/isdn.pm_.c:166 msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Adja meg a szolgáltatója nevét.\n" "Ha az nincs benne a listában, válassza az \"Unlisted\"-et." #: ../../network/isdn.pm_.c:179 msgid "Europe protocol" msgstr "Európai protokoll" #: ../../network/isdn.pm_.c:179 msgid "Europe protocol (EDSS1)" msgstr "Európai protokoll (EDSS1)" #: ../../network/isdn.pm_.c:181 msgid "Protocol for the rest of the world" msgstr "Protokoll a világ többi részén" #: ../../network/isdn.pm_.c:181 msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Protokoll a világ többi részén\n" "D csatorna nélkül (bérelt vonal)" #: ../../network/isdn.pm_.c:185 msgid "Which protocol do you want to use?" msgstr "Melyik protokollt szeretné használni?" #: ../../network/isdn.pm_.c:196 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" "\"%s\" felületet észlelt a program. Szeretné használni ezt a felületet?" #: ../../network/isdn.pm_.c:203 msgid "What kind of card do you have?" msgstr "Milyen típusú kártyával rendelkezik?" #: ../../network/isdn.pm_.c:204 msgid "I don't know" msgstr "Nem tudom" #: ../../network/isdn.pm_.c:204 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../network/isdn.pm_.c:204 msgid "PCI" msgstr "PCI" #: ../../network/isdn.pm_.c:210 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Amennyiben ISA kártyája van, a következő képernyőn látható értékek\n" "beállítása lényeges.\n" "\n" "Ha PCMCIA kártyája van, tudnia kell a kártya \"IRQ\" és \"IO\" értékeit.\n" #: ../../network/isdn.pm_.c:214 msgid "Abort" msgstr "Megszakítás" #: ../../network/isdn.pm_.c:214 msgid "Continue" msgstr "Folytatás" #: ../../network/isdn.pm_.c:220 msgid "Which is your ISDN card?" msgstr "Milyen ISDN-kártyája van?" #: ../../network/isdn.pm_.c:239 msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Találtam egy ISDN PCI kártyát, de nem ismertem fel a típusát. Válasszon ki " "egy PCI kártyát a következő képernyőn." #: ../../network/isdn.pm_.c:248 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" "Nem találtam ISDN PCI kártyát. Válasszon ki egyet a következő képernyőn." #: ../../network/modem.pm_.c:57 msgid "Please choose which serial port your modem is connected to." msgstr "Válassza ki, hogy melyik soros portra csatlakozik a modeme." #: ../../network/modem.pm_.c:67 msgid "Dialup options" msgstr "Modemes csatlakozás beállításai" #: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619 msgid "Connection name" msgstr "Csatlakozás neve" #: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620 msgid "Phone number" msgstr "Telefonszám" #: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621 msgid "Login ID" msgstr "Felhasználónév" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "CHAP" msgstr "CHAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "PAP" msgstr "PAP" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Script-based" msgstr "Szkript-alapú" #: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623 msgid "Terminal-based" msgstr "Terminál-alapú" #: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624 msgid "Domain name" msgstr "Tartománynév" #: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625 msgid "First DNS Server (optional)" msgstr "Elsődleges DNS-kiszolgáló (nem kötelező)" #: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626 msgid "Second DNS Server (optional)" msgstr "Másodlagos DNS-kiszolgáló (nem kötelező)" #: ../../network/modem.pm_.c:95 msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../network/modem.pm_.c:97 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Do nothing" msgstr "de ezzel nem egyező" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Install rpm" msgstr "Telepítés" #: ../../network/modem.pm_.c:97 #, fuzzy msgid "Title" msgstr "Tábla" #: ../../network/netconnect.pm_.c:29 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" "\n" "Bonthatja a kapcsolatot vagy újra elvégezheti a beállításokat." #: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can reconfigure your connection." msgstr "" "\n" "A kapcsolat újból beállítható." #: ../../network/netconnect.pm_.c:29 msgid "You are currently connected to internet." msgstr "Jelenleg csatlakozva van az internethez." #: ../../network/netconnect.pm_.c:32 msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "" "\n" "Csatlakozás az internethez vagy a kapcsolat újbóli beállítása." #: ../../network/netconnect.pm_.c:32 msgid "You are not currently connected to Internet." msgstr "Jelenleg nincs csatlakozva az internethez." #: ../../network/netconnect.pm_.c:36 msgid "Connect" msgstr "Csatlakozás" #: ../../network/netconnect.pm_.c:37 msgid "Disconnect" msgstr "A kapcsolat bontása" #: ../../network/netconnect.pm_.c:38 msgid "Configure the connection" msgstr "A kapcsolat beállítása" #: ../../network/netconnect.pm_.c:41 msgid "Internet connection & configuration" msgstr "Az internetkapcsolat beállítása" #: ../../network/netconnect.pm_.c:94 #, c-format msgid "We are now going to configure the %s connection." msgstr "A(z) \"%s\" kapcsolat beállítása következik." #: ../../network/netconnect.pm_.c:103 #, c-format msgid "" "\n" "\n" "\n" "We are now going to configure the %s connection.\n" "\n" "\n" "Press OK to continue." msgstr "" "\n" "\n" "\n" "A(z) \"%s\" kapcsolat beállítása következik.\n" "\n" "\n" "A továbblépéshez nyomja meg az OK gombot." #: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272 #: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77 msgid "Network Configuration" msgstr "Hálózatbeállítás" #: ../../network/netconnect.pm_.c:133 msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Mivel a hálózaton keresztül telepít, a hálózat beállítása már megtörtént.\n" "Kattintson az OK gombra a beállítások megtartásához, vagy a Mégsem gombra\n" "a hálózat és az internetkapcsolat újbóli beállításához.\n" #: ../../network/netconnect.pm_.c:157 msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" "Üdvözöljük a hálózatbeállító varázslóban.\n" "\n" "A hálózat és az internetkapcsolat beállítása következik.\n" "Törölje a kijelölést az opció mellől, ha nem kér automatikus felismerést.\n" #: ../../network/netconnect.pm_.c:163 msgid "Choose the profile to configure" msgstr "Adja meg a beállítani kívánt profil nevét" #: ../../network/netconnect.pm_.c:164 msgid "Use auto detection" msgstr "Automatikus detektálás" #: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966 #: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274 #: ../../standalone/drakfloppy_.c:118 msgid "Expert Mode" msgstr "Szakértői mód" #: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364 msgid "Detecting devices..." msgstr "Eszközök keresése..." #: ../../network/netconnect.pm_.c:214 msgid "Normal modem connection" msgstr "Normál modemes kapcsolat" #: ../../network/netconnect.pm_.c:214 #, c-format msgid "detected on port %s" msgstr "detektálva ezen a porton: %s" #: ../../network/netconnect.pm_.c:215 #, fuzzy msgid "Winmodem connection" msgstr "Normál modemes kapcsolat" #: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217 #, fuzzy msgid "detected" msgstr "detektálva: %s" #: ../../network/netconnect.pm_.c:216 msgid "ISDN connection" msgstr "ISDN-kapcsolat" #: ../../network/netconnect.pm_.c:216 #, c-format msgid "detected %s" msgstr "detektálva: %s" #: ../../network/netconnect.pm_.c:217 msgid "ADSL connection" msgstr "ADSL-kapcsolat" #: ../../network/netconnect.pm_.c:218 msgid "Cable connection" msgstr "Kábeles kapcsolat" #: ../../network/netconnect.pm_.c:218 msgid "cable connection detected" msgstr "kábeles kapcsolat detektálva" #: ../../network/netconnect.pm_.c:219 msgid "LAN connection" msgstr "Helyi hálózatos kapcsolat" #: ../../network/netconnect.pm_.c:219 msgid "ethernet card(s) detected" msgstr "Ethernet-kártya/kártyák detektálva" #: ../../network/netconnect.pm_.c:222 msgid "Choose the connection you want to configure" msgstr "Válassza ki a beállítani kívánt eszközt" #: ../../network/netconnect.pm_.c:246 msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Egynél több internetkapcsolatot hozott létre.\n" "Válassza ki azt, amelyiket használni szeretné.\n" "\n" #: ../../network/netconnect.pm_.c:247 msgid "Internet connection" msgstr "Internetkapcsolat" #: ../../network/netconnect.pm_.c:253 msgid "Do you want to start the connection at boot?" msgstr "Jöjjön létre a kapcsolat a rendszer indulásakor?" #: ../../network/netconnect.pm_.c:267 msgid "Network configuration" msgstr "Hálózatbeállítás" #: ../../network/netconnect.pm_.c:268 msgid "The network needs to be restarted" msgstr "A hálózatkezelést újra kell indítani" #: ../../network/netconnect.pm_.c:272 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Hiba történt a hálózatkezelés újraindításakor: \n" "\n" "%s" #: ../../network/netconnect.pm_.c:282 msgid "" "Congratulations, the network and Internet configuration is finished.\n" "The configuration will now be applied to your system.\n" "\n" msgstr "" "Gratulálunk! A hálózat és az internet-hozzáférés beállítása befejeződött.\n" "\n" "Most érvényesítem az új beállításokat.\n" #: ../../network/netconnect.pm_.c:286 msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Annak elvégzése után érdemes újraindítani az X környezetet,\n" "hogy a gépnév módosításából eredő problémák elkerülhetők legyenek." #: ../../network/netconnect.pm_.c:287 msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Beállítás közben problémák merültek fel.\n" "Tesztelje le a kapcsolatot a net_monitor vagy az mcc használatával. Ha a " "kapcsolat nem működik, esetleg indítsa el újra a beállítást." #: ../../network/network.pm_.c:278 msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "Figyelmeztetés: Ez az eszköz már be lett állítva internet-hozzáféréshez.\n" "Elég elfogadni a már meglévő beállításokat.\n" "A lenti mezők módosításával felül lehet bírálni a beállításokat." #: ../../network/network.pm_.c:283 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Adja meg a gép IP-beállításait.\n" "Minden mezőbe IP-címet írjon pontozott decimális formátumban\n" "(például: 192.169.10.11)." #: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294 #, c-format msgid "Configuring network device %s" msgstr "A(z) %s hálózati eszköz beállítása" # %s: modulnév # _(" (driver %s)", $module) #: ../../network/network.pm_.c:294 #, c-format msgid " (driver %s)" msgstr " (meghajtó: %s)" #: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228 #: ../../standalone/drakconnect_.c:464 msgid "IP address" msgstr "IP-cím" #: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465 #: ../../standalone/drakgw_.c:291 msgid "Netmask" msgstr "Hálózati maszk" #: ../../network/network.pm_.c:298 msgid "(bootp/dhcp)" msgstr "(BOOTP/DHCP)" #: ../../network/network.pm_.c:298 msgid "Automatic IP" msgstr "Automatikus IP-cím" #: ../../network/network.pm_.c:299 msgid "Start at boot" msgstr "Indítás rendszerbetöltésnél" #: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812 msgid "IP address should be in format 1.2.3.4" msgstr "Az IP-cím formátuma 1.2.3.4 legyen" #: ../../network/network.pm_.c:326 msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0'." msgstr "" #: ../../network/network.pm_.c:330 msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0'." msgstr "" #: ../../network/network.pm_.c:350 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Adja meg a gépe nevét.\n" "A teljes nevet kell beírni, például: \"mybox.mylab.myco.com\".\n" "Megadhatja az átjáró (gateway) IP-címét is, ha van olyan." #: ../../network/network.pm_.c:355 msgid "DNS server" msgstr "DNS-kiszolgáló" #: ../../network/network.pm_.c:356 #, c-format msgid "Gateway (e.g. %s)" msgstr "Átjáró (például %s)" #: ../../network/network.pm_.c:358 msgid "Gateway device" msgstr "Átjáró-eszköz" #: ../../network/network.pm_.c:363 msgid "DNS server address should be in format 1.2.3.4" msgstr "A DNS-kiszolgáló címének formátuma 1.2.3.4 legyen" #: ../../network/network.pm_.c:367 msgid "Gateway address should be in format 1.2.3.4" msgstr "Az átjáró címének formátuma 1.2.3.4 legyen" #: ../../network/network.pm_.c:381 msgid "Proxies configuration" msgstr "Proxy-beállítások" #: ../../network/network.pm_.c:382 msgid "HTTP proxy" msgstr "HTTP-proxy" #: ../../network/network.pm_.c:383 msgid "FTP proxy" msgstr "FTP-proxy" #: ../../network/network.pm_.c:384 msgid "Track network card id (useful for laptops)" msgstr "A hálózati kártya azonosítójának követése (laptopoknál hasznos)" #: ../../network/network.pm_.c:387 msgid "Proxy should be http://..." msgstr "A proxy valami ilyen kell, hogy legyen: http://..." #: ../../network/network.pm_.c:388 msgid "Url should begin with 'ftp:' or 'http:'" msgstr "Az URL-nek ftp: vagy http: kezdetűnek kell lenni" #: ../../network/shorewall.pm_.c:26 msgid "Firewalling configuration detected!" msgstr "A tűzfal beállításait sikerült felismerni." #: ../../network/shorewall.pm_.c:27 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation." msgstr "" "Figyelem! Egy már létező tűzfalbeállítást találtam. Néhány apróbb " "módosításra szükség lehet a telepítés elvégzése után." #: ../../network/tools.pm_.c:57 msgid "Internet configuration" msgstr "Internet-beállítások" #: ../../network/tools.pm_.c:58 msgid "Do you want to try to connect to the Internet now?" msgstr "Kipróbáljuk az internetkapcsolatot most?" #: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193 msgid "Testing your connection..." msgstr "A kapcsolat ellenőrzése..." #: ../../network/tools.pm_.c:70 msgid "The system is now connected to Internet." msgstr "A rendszer internetes kapcsolata él." #: ../../network/tools.pm_.c:71 msgid "For security reason, it will be disconnected now." msgstr "Biztonsági okokból lebontom a kapcsolatot." #: ../../network/tools.pm_.c:72 msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "" "Az internetkapcsolat feltehetően nem aktív.\n" "Próbálja meg újból elvégezni a beállítást." #: ../../network/tools.pm_.c:96 msgid "Connection Configuration" msgstr "A kapcsolat beállítása" #: ../../network/tools.pm_.c:97 msgid "Please fill or check the field below" msgstr "Töltse ki vagy ellenőrizze az alábbi mezőket" #: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605 msgid "Card IRQ" msgstr "Kártya IRQ" #: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606 msgid "Card mem (DMA)" msgstr "Kártya DMA" #: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607 msgid "Card IO" msgstr "Kártya IO" #: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608 msgid "Card IO_0" msgstr "Kártya IO_0" #: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609 msgid "Card IO_1" msgstr "Kártya IO_1" #: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610 msgid "Your personal phone number" msgstr "Az Ön saját telefonszáma" #: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611 msgid "Provider name (ex provider.net)" msgstr "A szolgáltató neve (pl.: provider.net)" #: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612 msgid "Provider phone number" msgstr "A szolgáltató telefonszáma" #: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613 msgid "Provider dns 1 (optional)" msgstr "Elsődleges DNS-kiszolgáló (nem kötelező)" #: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614 msgid "Provider dns 2 (optional)" msgstr "Másodlagos DNS-kiszolgáló (nem kötelező)" #: ../../network/tools.pm_.c:109 msgid "Choose your country" msgstr "Válassza ki az országot" #: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617 msgid "Dialing mode" msgstr "Tárcsázási mód" #: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629 msgid "Connection speed" msgstr "Csatlakozási sebesség" #: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630 msgid "Connection timeout (in sec)" msgstr "A csatlakozás várakozási ideje (másodpercben)" #: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615 msgid "Account Login (user name)" msgstr "Felhasználónév" #: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616 #: ../../standalone/drakconnect_.c:647 msgid "Account Password" msgstr "Jelszó" #: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132 msgid "United Kingdom" msgstr "Egyesült Királyság" #: ../../partition_table.pm_.c:603 msgid "mount failed: " msgstr "a csatlakoztatás nem sikerült: " #: ../../partition_table.pm_.c:667 msgid "Extended partition not supported on this platform" msgstr "A kiterjesztett (extended) partíció nem támogatott ezen a platformon" #: ../../partition_table.pm_.c:685 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "A partíciós táblában van egy üres tartomány, de nem tudom használni.\n" "Az egyetlen megoldás az elsődleges partíció áthelyezése úgy, hogy\n" "a kiterjesztett partíciók mellé kerüljön az üres hely." #: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "A(z) %s fájlból való visszaállítás sikertelen: %s" #: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "Hibás mentésfájl" #: ../../partition_table.pm_.c:796 #, c-format msgid "Error writing to file %s" msgstr "Hiba a(z) %s fájl írása közben" #: ../../partition_table/raw.pm_.c:192 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random trash" msgstr "" "Valamilyen probléma van a meghajtóval. \n" "Az adatintegritási teszt végrehajtása nem sikerült. \n" "Ez azt jelenti, hogy a lemezre való írás tönkreteheti a meghajtó \n" "adattartalmát." # The "Importance" ratings: # 5: "must have" # 4: "important" # 3: "very nice" # 2: "nice" # 1: "maybe" #: ../../pkgs.pm_.c:26 msgid "must have" msgstr "nagyon fontos" #: ../../pkgs.pm_.c:27 msgid "important" msgstr "fontos" #: ../../pkgs.pm_.c:28 msgid "very nice" msgstr "erősen ajánlott" #: ../../pkgs.pm_.c:29 msgid "nice" msgstr "ajánlott" #: ../../pkgs.pm_.c:30 msgid "maybe" msgstr "opcionális" #: ../../printer/data.pm_.c:18 msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: ../../printer/data.pm_.c:19 msgid "PDQ" msgstr "PDQ" #: ../../printer/data.pm_.c:30 msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: ../../printer/data.pm_.c:31 msgid "LPD" msgstr "LPD" #: ../../printer/data.pm_.c:51 msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: ../../printer/data.pm_.c:52 msgid "LPRng" msgstr "LPRng" #: ../../printer/data.pm_.c:75 msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common UNIX Printing System" #: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677 msgid "CUPS" msgstr "CUPS" #: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213 #: ../../printer/detect.pm_.c:250 msgid "Unknown Model" msgstr "Ismeretlen modell" #: ../../printer/main.pm_.c:26 msgid "Local printer" msgstr "Helyi nyomtató" #: ../../printer/main.pm_.c:27 msgid "Remote printer" msgstr "Távoli nyomtató" #: ../../printer/main.pm_.c:28 msgid "Printer on remote CUPS server" msgstr "Távoli CUPS-nyomtató" #: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835 msgid "Printer on remote lpd server" msgstr "Távoli lpd-nyomtató" #: ../../printer/main.pm_.c:30 msgid "Network printer (TCP/Socket)" msgstr "Hálózati nyomtató (TCP/socket-alapú)" #: ../../printer/main.pm_.c:31 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT-nyomtató" #: ../../printer/main.pm_.c:32 msgid "Printer on NetWare server" msgstr "NetWare-nyomtató" #: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839 msgid "Enter a printer device URI" msgstr "A nyomtatóeszköz URI-ja" #: ../../printer/main.pm_.c:34 msgid "Pipe job into a command" msgstr "A feladat kimenetének átirányítása egy parancsba" #: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478 #: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228 msgid "Unknown model" msgstr "Ismeretlen modell" #: ../../printer/main.pm_.c:317 msgid "Local Printers" msgstr "Helyi nyomtatók" #: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678 msgid "Remote Printers" msgstr "Távoli nyomtatók" #: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381 #, c-format msgid " on parallel port \\/*%s" msgstr " ezen a párhuzamos porton: \\/*%s" #: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB nyomtató \\/*%s" #: ../../printer/main.pm_.c:334 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", többfunkciós eszköz ezen a párhuzamos porton: \\/*%s" #: ../../printer/main.pm_.c:337 msgid ", multi-function device on USB" msgstr ", többfunkciós eszköz USB-n" #: ../../printer/main.pm_.c:339 msgid ", multi-function device on HP JetDirect" msgstr ", többfunkciós eszköz HP JetDirect-en" #: ../../printer/main.pm_.c:341 msgid ", multi-function device" msgstr ", többfunkciós eszköz" #: ../../printer/main.pm_.c:344 #, c-format msgid ", printing to %s" msgstr ", nyomtatás ide: %s" #: ../../printer/main.pm_.c:346 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr " ezen az LPD kiszolgálón: \"%s\", nyomtató: \"%s\"" #: ../../printer/main.pm_.c:348 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP gép: \"%s\", port: %s" #: ../../printer/main.pm_.c:352 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr " ezen az SMB/Windows kiszolgálón: \"%s\", megosztás: \"%s\"" #: ../../printer/main.pm_.c:356 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr " ezen a Novell kiszolgálón: \"%s\", nyomtató: \"%s\"" #: ../../printer/main.pm_.c:358 #, c-format msgid ", using command %s" msgstr ", ezzel a paranccsal: %s" #: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603 msgid "Raw printer (No driver)" msgstr "\"Nyers\" nyomtató (nincs meghajtóprogram)" #: ../../printer/main.pm_.c:647 #, c-format msgid "(on %s)" msgstr "(itt: %s)" #: ../../printer/main.pm_.c:649 msgid "(on this machine)" msgstr "(ezen a gépen)" #: ../../printer/main.pm_.c:674 #, c-format msgid "On CUPS server \"%s\"" msgstr "Ezen a CUPS-kiszolgálón: \"%s\"" #: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888 #: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120 #: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197 #: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354 msgid " (Default)" msgstr " (alapértelmezés)" #: ../../printer/printerdrake.pm_.c:27 msgid "Select Printer Connection" msgstr "Válassza ki a nyomtató csatlakozásának típusát" #: ../../printer/printerdrake.pm_.c:28 msgid "How is the printer connected?" msgstr "Hogyan van a nyomtató csatlakoztatva?" #: ../../printer/printerdrake.pm_.c:30 msgid "" "\n" "Printers on remote CUPS servers you do not have to configure here; these " "printers will be automatically detected." msgstr "" "\n" "A távoli CUPS-nyomtatókat nem kell beállítani, azokat a program " "automatikusan felismeri." #: ../../printer/printerdrake.pm_.c:38 msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Automatikus nyomtatófelderítés (helyi, TCP/socket és SMB nyomtatók)" #: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950 msgid "CUPS configuration" msgstr "CUPS-beállítások" #: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951 msgid "Specify CUPS server" msgstr "Adja meg a CUPS-kiszolgálót" #: ../../printer/printerdrake.pm_.c:83 msgid "" "To get access to printers on remote CUPS servers in your local network you " "do not have to configure anything; the CUPS servers inform your machine " "automatically about their printers. All printers currently known to your " "machine are listed in the \"Remote printers\" section in the main window of " "Printerdrake. When your CUPS server is not in your local network, you have " "to enter the CUPS server IP address and optionally the port number to get " "the printer information from the server, otherwise leave these fields blank." msgstr "" "A helyi hálózaton levő CUPS kiszolgálók nyomtatóinak eléréséhez Önnek nem " "szükséges beállítania semmiféle nyomtatót; a CUPS kiszolgálók automatikusan " "informálják az Ön gépét a rajtuk keresztül elérhető nyomtatókkal " "kapcsolatban. Az Ön gépe által ismert nyomtatók listája a PrinterDrake " "program főablakának \"Távoli nyomtatók\" részében látható. Ha a CUPS " "kiszolgáló egy másik hálózaton van, akkor meg kell adni a CUPS kiszolgáló IP-" "címét és - opcionálisan - a portszámot ahhoz, hogy a kiszolgálótól le " "lehessen kérdezni a nyomtatóinformációkat. Máskülönben hagyja üresen ezen " "mezőket." #: ../../printer/printerdrake.pm_.c:84 msgid "" "\n" "Normally, CUPS is automatically configured according to your network " "environment, so that you can access the printers on the CUPS servers in your " "local network. If this does not work correctly, turn off \"Automatic CUPS " "configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not " "forget to restart CUPS afterwards (command: \"service cups restart\")." msgstr "" "\n" "A CUPS beállítása általában automatikusan megtörténik a hálózat jellemzőinek " "megfelelően, hogy a helyi hálózaton található CUPS-nyomtatók használhatók " "legyenek. Ha a beállítás nem megfelelő, akkor kapcsolja ki az \"Automatikus " "CUPS-beállítás\" opciót és módosítsa kézzel az /etc/cups/cupsd.conf fájlt. " "Ne felejtse ez után újraindítani a CUPS szolgáltatást (például a \"service " "cups restart\" paranccsal)." #: ../../printer/printerdrake.pm_.c:88 msgid "The IP address should look like 192.168.1.20" msgstr "Az IP-cím formátuma 192.168.1.20 legyen" #: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041 msgid "The port number should be an integer!" msgstr "A portnak egész számnak kell lennie!" #: ../../printer/printerdrake.pm_.c:99 msgid "CUPS server IP" msgstr "CUPS-kiszolgáló IP-címe" #: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061 #: ../../standalone/harddrake2_.c:63 msgid "Port" msgstr "Port" #: ../../printer/printerdrake.pm_.c:102 msgid "Automatic CUPS configuration" msgstr "Automatikus CUPS-beállítás" #: ../../printer/printerdrake.pm_.c:159 msgid "Checking your system..." msgstr "A rendszer ellenőrzése..." #: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226 #: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481 #: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133 #: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343 #: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436 #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630 #: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701 #: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731 #: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809 #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911 #: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281 #: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369 #: ../../standalone/printerdrake_.c:47 msgid "Printerdrake" msgstr "PrinterDrake" #: ../../printer/printerdrake.pm_.c:167 msgid "" "There are no printers found which are directly connected to your machine" msgstr "Nem található olyan nyomtató, amely a géphez közvetlenül csatlakozna." #: ../../printer/printerdrake.pm_.c:179 msgid "" "The following printers\n" "\n" msgstr "" "A következő nyomtatók\n" "\n" #: ../../printer/printerdrake.pm_.c:180 msgid "" "The following printer\n" "\n" msgstr "" "A következő nyomtató\n" "\n" #: ../../printer/printerdrake.pm_.c:182 msgid "" "\n" "and one unknown printer are " msgstr "" "\n" "és egy ismeretlen nyomtató " #: ../../printer/printerdrake.pm_.c:184 #, c-format msgid "" "\n" "and %d unknown printers are " msgstr "" "\n" "és %d ismeretlen nyomtató " #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "are " msgstr "" "\n" " " #: ../../printer/printerdrake.pm_.c:187 msgid "" "\n" "is " msgstr "" "\n" " " #: ../../printer/printerdrake.pm_.c:189 msgid "directly connected to your system" msgstr "közvetlenül csatlakoztatva van(nak) a géphez" #: ../../printer/printerdrake.pm_.c:192 msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Egy ismeretlen nyomtató közvetlenül csatlakozik a géphez" #: ../../printer/printerdrake.pm_.c:194 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "%d ismeretlen nyomtató közvetlenül csatlakozik a géphez" #: ../../printer/printerdrake.pm_.c:200 msgid " (Make sure that all your printers are connected and turned on).\n" msgstr " (csatlakoztassa az összes nyomtatót, és kapcsolja be azokat)\n" #: ../../printer/printerdrake.pm_.c:214 msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Szeretné lehetővé tenni a nyomtatást a fenti nyomtatókon vagy a helyi " "hálózat nyomtatóin?\n" #: ../../printer/printerdrake.pm_.c:215 msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Szeretné lehetővé tenni a nyomtatást a helyi hálózat nyomtatóin?\n" #: ../../printer/printerdrake.pm_.c:217 msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Szeretné lehetővé tenni a nyomtatást a fenti nyomtatókon?\n" #: ../../printer/printerdrake.pm_.c:218 msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "Biztosan be szeretné állítani a nyomtatást ezen a gépen?\n" #: ../../printer/printerdrake.pm_.c:219 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "Megjegyzés: a nyomtató típusától és a nyomtatási rendszertől függően akár %d " "MByte összméretű további szoftver is telepítésre kerülhet." #: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270 #: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933 #: ../../printer/printerdrake.pm_.c:3060 msgid "Add a new printer" msgstr "Nyomtató hozzáadása" #: ../../printer/printerdrake.pm_.c:259 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Üdvözli a nyomtatóbeállító varázsló.\n" "\n" "A varázsló lehetővé teszi helyi és távoli nyomtatók telepítését, amelyeket " "akár erről a gépről, akár a hálózat többi gépéről lehet majd használni.\n" "\n" "A nyomtató telepítéséhez szükséges adatokat a varázsló megkérdezi Öntől. " "Hozzáférést nyújt az elérhető nyomtatómeghajtókhoz és a meghajtóprogramok " "beállításaihoz, továbbá a nyomtatók kapcsolattípusát is képes beállítani." #: ../../printer/printerdrake.pm_.c:272 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) and you Windows machines must be connected and " "turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "Üdvözli a nyomtatóbeállító varázsló.\n" "\n" "A varázsló segítséget nyújt a számítógéphez csatlakoztatott, a hálózaton " "keresztül elérhető és a távoli windowsos gépekre csatlakoztatott nyomtatók " "telepítéséhez.\n" "\n" "Ha van nyomtató csatlakoztatva ehhez a számítógéphez, kapcsolja be azt, hogy " "felderíthető legyen a típusa. A hálózati nyomtatókat és az azokhoz " "kapcsolódó esetleges windowsos számítógépeket is be kell kapcsolni - a " "nyomtatókat a megfelelő géphez csatlakoztatva.\n" "\n" "A helyi és a hálózati nyomtatók felderítése együttesen több időt vesz " "igénybe, mint csak a helyi nyomtatóké, ezért ha nincs szükség a hálózati " "nyomtatókra, akkor kapcsolja ki a hálózati és/vagy a windowsos gépre " "csatlakozó nyomtatók felderítését.\n" "\n" " A folytatáshoz kattintson a \"Következő\" gombra. Ha viszont most nem " "kívánja telepíteni a nyomtatókat, akkor a \"Mégsem\" gombra kattintson." #: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "Üdvözli a nyomtatóbeállító varázsló.\n" "\n" "A varázsló segítséget nyújt a számítógéphez csatlakoztatott nyomtatók " "telepítéséhez.\n" "\n" "Ha van nyomtató csatlakoztatva ehhez a számítógéphez, kapcsolja be azt, hogy " "felderíthető legyen a típusa.\n" "\n" " A folytatáshoz kattintson a \"Következő\" gombra. Ha viszont most nem " "kívánja telepíteni a nyomtatókat, akkor a \"Mégsem\" gombra kattintson." #: ../../printer/printerdrake.pm_.c:289 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " "want to set up your printer(s) now." msgstr "" "\n" "Üdvözli a nyomtatóbeállító varázsló.\n" "\n" "A varázsló segítséget nyújt a számítógéphez csatlakoztatott és a hálózaton " "keresztül elérhető nyomtatók telepítéséhez.\n" "\n" "Ha van nyomtató csatlakoztatva ehhez a számítógéphez, kapcsolja be azt, hogy " "felderíthető legyen a típusa. A hálózati nyomtatókat is csatlakoztatni kell " "és be kell kapcsolni.\n" "\n" "A helyi és a hálózati nyomtatók felderítése együttesen több időt vesz " "igénybe, mint csak a helyi nyomtatóké, ezért ha nincs szükség a hálózati " "nyomtatókra, akkor kapcsolja ki a hálózati nyomtatók felderítését.\n" "\n" " A folytatáshoz kattintson a \"Következő\" gombra. Ha viszont most nem " "kívánja telepíteni a nyomtatókat, akkor a \"Mégsem\" gombra kattintson." #: ../../printer/printerdrake.pm_.c:307 msgid "Auto-detect printers connected to this machine" msgstr "A helyi nyomtatók automatikus felderítése" #: ../../printer/printerdrake.pm_.c:310 msgid "Auto-detect printers connected directly to the local network" msgstr "A hálózatra csatlakoztatott nyomtatók automatikus felderítése" #: ../../printer/printerdrake.pm_.c:313 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "A windowsos gépekre csatlakoztatott nyomtatók automatikus felderítése" #: ../../printer/printerdrake.pm_.c:329 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" "\n" "Gratulálunk, a nyomtató beállítása sikeresen megtörtént.\n" "\n" "Nyomtatni általában az alkalmazások \"Fájl\" menüjében levő \"Nyomtatás\" " "funkcióval lehet.\n" "\n" "Ha szeretne egy új nyomtatót felvenni, vagy egy meglevőt eltávolítani " "illetve átnevezni, vagy ha szeretné módosítani az alapértelmezés szerinti " "beállításokat (papírforrás, nyomtatási minőség, ...), akkor használja a " "Mandrake Vezérlőközpont \"Hardver\" részében található \"Nyomtató\" " "alkalmazást." #: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538 #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Printer auto-detection" msgstr "Automatikus nyomtatófelderítés" #: ../../printer/printerdrake.pm_.c:385 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", hálózati nyomtató: \"%s\", port: %s" #: ../../printer/printerdrake.pm_.c:387 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", nyomtató: \"%s\" ezen az SMB/Windows kiszolgálón: \"%s\"" #: ../../printer/printerdrake.pm_.c:391 #, c-format msgid "Detected %s" msgstr "Felismert eszköz: %s" #: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423 #: ../../printer/printerdrake.pm_.c:440 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "Nyomtató ezen a párhuzamos porton: \\/*%s" #: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425 #: ../../printer/printerdrake.pm_.c:443 #, c-format msgid "USB printer \\/*%s" msgstr "USB nyomtató: \\/*%s" #: ../../printer/printerdrake.pm_.c:399 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Hálózati nyomtató: \"%s\", port: %s" #: ../../printer/printerdrake.pm_.c:401 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Nyomtató: \"%s\" ezen az SMB/Windows kiszolgálón: \"%s\"" #: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547 msgid "Local Printer" msgstr "Helyi nyomtató" #: ../../printer/printerdrake.pm_.c:526 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Helyi nyomtató nem található. Egy nyomtató kézi telepítéséhez adjon meg egy " "eszköznevet illetve fájlnevet a beviteli sorban (párhuzamos portok: /dev/" "lp0, /dev/lp1, ... (amelyek egyenértékűek a következőkkel: LPT1:, " "LPT2:, ...), első USB nyomtató: /dev/usb/lp0, második USB nyomtató: /dev/usb/" "lp1, ...)." #: ../../printer/printerdrake.pm_.c:530 msgid "You must enter a device or file name!" msgstr "Egy eszköz- vagy fájlnevet kell megadni." #: ../../printer/printerdrake.pm_.c:539 msgid "No printer found!" msgstr "Nyomtató nem található." #: ../../printer/printerdrake.pm_.c:548 msgid "Available printers" msgstr "Az elérhető nyomtatók" #: ../../printer/printerdrake.pm_.c:552 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" msgstr "" "A rendszer a következő nyomtatót találta. Ha nem ezt szeretné beállítani, " "akkor adjon meg egy eszköznevet illetve fájlnevet a beviteli sorban." #: ../../printer/printerdrake.pm_.c:553 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" msgstr "" "A rendszer a következő nyomtatókat találta. Válassza ki, melyik nyomtatót " "kívánja beállítani, vagy adjon meg egy eszköznevet illetve fájlnevet a " "beviteli sorban." #: ../../printer/printerdrake.pm_.c:555 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " "if you prefer a customized printer configuration, turn on \"Manual " "configuration\"." msgstr "" "A rendszer a következő nyomtatót találta. A nyomtató automatikusan " "beállításra kerül. Ha a nyomtató helytelenül volt felismerve, vagy ha Ön " "szeretné módosítani annak beállításait, akkor kapcsolja be a \"Kézi beállítás" "\" opciót." #: ../../printer/printerdrake.pm_.c:556 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " "automatically. If your printer was not correctly detected or if you prefer a " "customized printer configuration, turn on \"Manual configuration\"." msgstr "" "A rendszer a következő nyomtatókat találta. Válassza ki, melyik nyomtatót " "kívánja beállítani. A nyomtató automatikusan beállításra kerül. Ha a " "nyomtató helytelenül volt felismerve, vagy ha Ön szeretné módosítani annak " "beállításait, akkor kapcsolja be a \"Kézi beállítás\" opciót." #: ../../printer/printerdrake.pm_.c:558 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Válassza ki, melyik portra van csatlakoztatva a nyomtató, vagy adjon meg egy " "eszköznevet illetve fájlnevet a beviteli sorban" #: ../../printer/printerdrake.pm_.c:559 msgid "Please choose the port where your printer is connected to." msgstr "Válassza ki, melyik portra van csatlakoztatva a nyomtató." #: ../../printer/printerdrake.pm_.c:561 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" " (párhuzamos portok: /dev/lp0, /dev/lp1, ... (egyenértékűek ezekkel: LPT1:, " "LPT2:, ...), első USB nyomtató: /dev/usb/lp0, második USB nyomtató: /dev/usb/" "lp1, ...)." #: ../../printer/printerdrake.pm_.c:565 msgid "You must choose/enter a printer/device!" msgstr "Ki kell választania illetve meg kell adnia egy nyomtatót vagy eszközt." #: ../../printer/printerdrake.pm_.c:584 msgid "Manual configuration" msgstr "Kézi beállítás" #: ../../printer/printerdrake.pm_.c:633 msgid "Remote lpd Printer Options" msgstr "Távoli lpd nyomtató beállításai" #: ../../printer/printerdrake.pm_.c:634 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Távoli lpd nyomtató használatához meg kell adni a nyomtatókiszolgáló nevét " "és a nyomtató nevét." #: ../../printer/printerdrake.pm_.c:635 msgid "Remote host name" msgstr "A távoli gép neve" #: ../../printer/printerdrake.pm_.c:636 msgid "Remote printer name" msgstr "A távoli nyomtató neve" #: ../../printer/printerdrake.pm_.c:639 msgid "Remote host name missing!" msgstr "A távoli gép neve nem lehet üres!" #: ../../printer/printerdrake.pm_.c:643 msgid "Remote printer name missing!" msgstr "A távoli nyomtató neve nem lehet üres!" #: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170 #, c-format msgid "Detected model: %s %s" msgstr "Felismert modell: %s %s" #: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978 msgid "Scanning network..." msgstr "A hálózat vizsgálata..." #: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", nyomtató: \"%s\" ezen a kiszolgálón: \"%s\"" #: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Nyomtató: \"%s\" ezen a kiszolgálón: \"%s\"" #: ../../printer/printerdrake.pm_.c:795 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) nyomtatási beállítások" #: ../../printer/printerdrake.pm_.c:796 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Ahhoz, hogy SMB-nyomtatóra tudjon nyomtatni, meg kell adnia a " "nyomtatókiszolgáló SMB-nevét (nem biztos, hogy ugyanaz, mint a TCP/IP-" "gépnév!) és IP-címét, a megosztott nyomtató nevét, és egy megfelelő " "jogosultságokkal rendelkező felhasználó nevét, jelszavát és munkacsoportját." #: ../../printer/printerdrake.pm_.c:797 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" " Ha a kívánt nyomtató fel lett ismerve, válassza ki a listából. Ha " "szükséges, adja meg a felhasználónevet, a jelszót és/vagy a munkacsoportot." #: ../../printer/printerdrake.pm_.c:799 msgid "SMB server host" msgstr "Az SMB-kiszolgáló neve" #: ../../printer/printerdrake.pm_.c:800 msgid "SMB server IP" msgstr "Az SMB-kiszolgáló IP-címe" #: ../../printer/printerdrake.pm_.c:801 msgid "Share name" msgstr "Megosztásnév" #: ../../printer/printerdrake.pm_.c:804 msgid "Workgroup" msgstr "Munkacsoport" #: ../../printer/printerdrake.pm_.c:806 msgid "Auto-detected" msgstr "Automatikusan felderítve" #: ../../printer/printerdrake.pm_.c:816 msgid "Either the server name or the server's IP must be given!" msgstr "A kiszolgáló nevét vagy IP-címét meg kell adni!" #: ../../printer/printerdrake.pm_.c:820 msgid "Samba share name missing!" msgstr "A Samba megosztásnév üres!" #: ../../printer/printerdrake.pm_.c:826 msgid "SECURITY WARNING!" msgstr "BIZTONSÁGI FIGYELMEZTETÉS" #: ../../printer/printerdrake.pm_.c:827 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Egy windowsos névvel illetve jelszóval történő nyomtatás beállítása " "következik. Egy, a Samba-kliens architektúrájában levő hiba miatt a jelszó " "kódolatlanul bekerül a Samba-kliens azon parancssorába, amely a windowsos " "kiszolgáló számára átadja a nyomtatási feladatot. Így ezen gép minden " "felhasználójának lehetősége van arra - például a \"ps auxwww\" parancs " "használatával -, hogy megjelenítse a jelszót.\n" "\n" "Javasoljuk, hogy használja a következő lehetőségek valamelyikét (azt " "mindenféleképpen biztosítani kell - például tűzfal használatával -, hogy " "csak a helyi hálózat gépei férjenek hozzá a windowsos kiszolgálóhoz):\n" "\n" "Használjon a windowsos kiszolgálón egy jelszó nélküli felhasználóazonosítót " "(például: \"GUEST\") vagy egy nyomtatási célokra szánt speciális azonosítót. " "Ne szüntesse meg a jelszóvédelmet semmilyen személyes azonosítón, és a " "rendszergazdai azonosítón sem.\n" "\n" "Állítsa be a windowsos kiszolgálót úgy, hogy az LPD protokollon keresztül " "tegye elérhetővé a nyomtatót. Ez után állítsa be az erről a gépről történő " "nyomtatást \"%s\" kapcsolattípussal a PrinterDrake programban.\n" "\n" #: ../../printer/printerdrake.pm_.c:837 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Állítsa be a windowsos kiszolgálót úgy, hogy az IPP protokollon keresztül " "tegye elérhetővé a nyomtatót. Ez után állítsa be az erről a gépről történő " "nyomtatást \"%s\" kapcsolattípussal a PrinterDrake programban.\n" "\n" #: ../../printer/printerdrake.pm_.c:840 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Csatlakoztassa a nyomtatót egy linuxos kiszolgálóhoz, és tegye lehetővé a " "windowsos gépek számára az ahhoz kliensként való csatlakozást.\n" "\n" "Valóban folytatni szeretné a nyomtató ilyen módon történő beállítását?" #: ../../printer/printerdrake.pm_.c:911 msgid "NetWare Printer Options" msgstr "NetWare nyomtatóbeállítások" #: ../../printer/printerdrake.pm_.c:912 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Ahhoz, hogy NetWare nyomtatóra tudjon nyomtatni, meg kell adnia a NetWare " "nyomtatókiszolgáló nevét (ez nem biztos, hogy megegyezik a TCP/IP " "gépnévvel!), a nyomtatási sor nevét, és egy megfelelő jogosultságokkal " "rendelkező felhasználói nevet és jelszót." #: ../../printer/printerdrake.pm_.c:913 msgid "Printer Server" msgstr "Nyomtatókiszolgáló" #: ../../printer/printerdrake.pm_.c:914 msgid "Print Queue Name" msgstr "A nyomtatási sor neve" #: ../../printer/printerdrake.pm_.c:919 msgid "NCP server name missing!" msgstr "Az NCP-kiszolgáló neve üres!" #: ../../printer/printerdrake.pm_.c:923 msgid "NCP queue name missing!" msgstr "Az NCP-sor neve üres!" #: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007 #, c-format msgid ", host \"%s\", port %s" msgstr ", gép: \"%s\", port: %s" #: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010 #, c-format msgid "Host \"%s\", port %s" msgstr "Gép: \"%s\", port: %s" #: ../../printer/printerdrake.pm_.c:1030 msgid "TCP/Socket Printer Options" msgstr "TCP/socket-alapú nyomtatási beállítások" #: ../../printer/printerdrake.pm_.c:1032 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." msgstr "" "Válasszon egy nyomtatót a felderített nyomtatók listájából, vagy adja meg a " "gépnevet vagy IP-címet és az opcionális portszámot (alapértelmezés: 9100) a " "megfelelő mezőkben." #: ../../printer/printerdrake.pm_.c:1033 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Ahhoz, hogy egy TCP/socket-alapú nyomtatóra nyomtathasson, meg kell adnia a " "nyomtatóhoz tartozó gépnevet vagy IP-címet és opcionálisan a portszámot " "(alapértelmezés: 9100). HP JetDirect kiszolgálókon a port száma általában " "9100; más kiszolgálókon ez más érték lehet. A hardver kézikönyvében " "valószínűleg talál további információt." #: ../../printer/printerdrake.pm_.c:1037 msgid "Printer host name or IP missing!" msgstr "A nyomtató gépneve illetve IP-címe üres." #: ../../printer/printerdrake.pm_.c:1059 msgid "Printer host name or IP" msgstr "A nyomtató gépneve vagy IP-címe" #: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109 msgid "Printer Device URI" msgstr "A nyomtatóeszköz URI-ja" #: ../../printer/printerdrake.pm_.c:1108 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Közvetlenül megadható a nyomtató elérési URI-ja. Az URI-nak meg kell " "felelnie a CUPS vagy a Foomatic előírásainak. Nem minden URI-típust támogat " "minden sorkezelő." #: ../../printer/printerdrake.pm_.c:1123 msgid "A valid URI must be entered!" msgstr "Érvényes URI-t kell megadni." #: ../../printer/printerdrake.pm_.c:1463 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Minden nyomtatóhoz meg kell adni egy nevet (például: \"nyomtató\"). A Leírás " "és Hely mezőket nem kötelező kitölteni, csak tájékoztatási célt szolgálnak." #: ../../printer/printerdrake.pm_.c:1464 msgid "Name of printer" msgstr "A nyomtató neve" #: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38 msgid "Description" msgstr "Leírás" #: ../../printer/printerdrake.pm_.c:1466 msgid "Location" msgstr "Hely" #: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599 msgid "Reading printer database..." msgstr "A nyomtató-adatbázis beolvasása..." #: ../../printer/printerdrake.pm_.c:1482 msgid "Preparing printer database..." msgstr "A nyomtató-adatbázis előkészítése..." #: ../../printer/printerdrake.pm_.c:1578 msgid "Your printer model" msgstr "A nyomtató típusa" #: ../../printer/printerdrake.pm_.c:1579 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "A PrinterDrake összehasonlította a nyomtatófelderítésből származó típusnevet " "a nyomtatóadatbázisában szereplőkkel, és kiválasztotta a legmegfelelőbb " "típust. Nem biztos, hogy ez a választás jó; főleg akkor, ha a nyomtató nem " "szerepel az adatbázisban. Ellenőrizze, hogy helyes-e a választás. Ha helyes, " "akkor kattintson \"A típus megfelelő\" gombra; ha viszont nem, akkor a " "\"Típuskiválasztás kézzel\" gombra kattintson. Az utóbbi esetben a következő " "képernyőn lehet kiválasztani a nyomtatótípust.\n" "\n" "Az Ön nyomtatója a PrinterDrake szerint:\n" "\n" "%s" #: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587 msgid "The model is correct" msgstr "A típus megfelelő" #: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586 #: ../../printer/printerdrake.pm_.c:1589 msgid "Select model manually" msgstr "Típuskiválasztás kézzel" #: ../../printer/printerdrake.pm_.c:1606 msgid "Printer model selection" msgstr "A nyomtató típusának kiválasztása" #: ../../printer/printerdrake.pm_.c:1607 msgid "Which printer model do you have?" msgstr "Milyen típusú a nyomtató?" #: ../../printer/printerdrake.pm_.c:1608 msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Search the correct model in the list when the cursor is " "standing on a wrong model or on \"Raw printer\"." msgstr "" "\n" "\n" "Ellenőrizze, hogy a PrinterDrake helyesen\n" "határozta-e meg a nyomtató típusát. Ha a\n" "kurzor egy nem megfelelő típuson áll, vagy\n" "a \"Nyers nyomtató\" bejegyzésen, akkor\n" "keresse meg a megfelelő típust a listában." #: ../../printer/printerdrake.pm_.c:1611 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Ha a nyomtatója nem szerepel a listában, akkor válasszon egy azzal " "kompatibilis nyomtatót (információk a nyomtató kézikönyvében) vagy egy " "hasonlót." #: ../../printer/printerdrake.pm_.c:1697 msgid "OKI winprinter configuration" msgstr "OKI windowsos nyomtató beállítása" #: ../../printer/printerdrake.pm_.c:1698 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Ön egy OKI windowsos lézernyomtató beállítását végzi. Ezek a nyomtatók egy " "speciális kommunikációs protokollt használnak, ami miatt csak akkor képesek " "működni, ha az első párhuzamos portra vannak csatlakoztatva. Ha az Ön " "nyomtatója egy másik portra vagy egy nyomtatókiszolgálóhoz csatlakozik, " "akkor tegye azt át az első párhuzamos portra, még mielőtt tesztoldalt " "nyomtatna - máskülönben a nyomtató nem fog működni. A kapcsolattípus-" "beállítást a meghajtóprogram figyelmen kívül hagyja." #: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745 msgid "Lexmark inkjet configuration" msgstr "Lexmark tintasugaras nyomtató beállítása" #: ../../printer/printerdrake.pm_.c:1719 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "A Lexmark által biztosított tintasugarasnyomtató-meghajtóprogramok csak " "helyi nyomtatókat támogatnak, tehát távoli gépen vagy nyomtatókiszolgálón " "levőket nem. Csatlakoztassa a nyomtatót egy helyi portra, vagy állítsa azt " "be azon a gépen, amelyhez az csatlakoztatva van." #: ../../printer/printerdrake.pm_.c:1746 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" "Ahhoz, hogy nyomtatni tudjon a Lexmark tintasugaras nyomtatóval ezen a " "gépen, szüksége lesz a Lexmark (http://www.lexmark.com/) által biztosított " "megfelelő meghajtóprogramokra. Kattintson a \"Drivers\" (meghajtóprogramok) " "linkre. Ez után válassza ki a megfelelő nyomtatótípust, majd operációs " "rendszerként a \"Linux\"-t. A meghajtóprogramok RPM csomagok illetve " "interaktív grafikus telepítést lehetővé tevő szkriptek formájában érhetők " "el. Nem szükséges a grafikus felületen végezni a beállítást. Lépjen ki a " "licencegyezmény után. Ez után nyomtasson nyomtatófej-igazítási oldalakat " "\"lexmarkmaintain\"-nel, és szükség esetén módosítsa a fej-igazítási " "beállításokat ezzel a programmal." #: ../../printer/printerdrake.pm_.c:1749 msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" msgstr "Zenographics ZJ-Stream formátumot használó GDI lézernyomtató" #: ../../printer/printerdrake.pm_.c:1750 msgid "" "Your printer belongs to the group of GDI laser printers (winprinters) sold " "by different manufacturers which uses the Zenographics ZJ-stream raster " "format for the data sent to the printer. The driver for these printers is " "still in a very early development stage and so it will perhaps not always " "work properly. Especially it is possible that the printer only works when " "you choose the A4 paper size.\n" "\n" "Some of these printers, as the HP LaserJet 1000, for which this driver was " "originally created, need their firmware to be uploaded to them after they " "are turned on. In the case of the HP LaserJet 1000 you have to search the " "printer's Windows driver CD or your Windows partition for the file " "\"sihp1000.img\" and upload the file to the printer with one of the " "following commands:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "The first command can be given by any normal user, the second must be given " "as root. After having done so you can print normally.\n" msgstr "" "Az Ön nyomtatója a - több cég által is gyártott - GDI lézernyomtatók (más " "néven: winprinter eszközök) közé tartozik. Ezek a nyomtatók Zenographics ZJ-" "Stream raszterformátumban kapják az adatokat. Az ezen nyomtatókhoz " "használható meghajtóprogram a fejlesztés korai fázisában van, ezért nem " "mindig működik megfelelően. Előfordulhat például az, hogy a nyomtató csak A4-" "es papírmérettel működik.\n" "\n" "Ezen nyomtatók közül néhányra - mint például a HP LaserJet 1000 (amelyhez ez " "a meghajtó eredetileg készült) - bekapcsoláskor fel kell tölteni a \"firmware" "\" vezérlőprogramot. A HP LaserJet 1000 esetén meg kell keresni a \"sihp1000." "img\" nevű fájlt a nyomtató windowsos CD-jén vagy egy windowsos partíción, " "majd fel kell azt tölteni a nyomtatóra a következő parancsok egyikével:\n" "\n" " lpr -o raw sihp1000.img\n" " cat sihp1000.img > /dev/usb/lp0\n" "\n" "Az első parancsot bármely felhasználó kiadhatja, a másodikat viszont csak " "rendszergazdai jogosultságú felhasználók. A parancs végrehajtása után a " "megszokott módon lehet nyomtatni.\n" #: ../../printer/printerdrake.pm_.c:1972 msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "A nyomtató alapértelmezései\n" "\n" "Ellenőrizze, hogy a papírméret és a tinta típusa illetve a nyomtatási mód " "(ha van olyan) helyesen van-e beállítva. Lézernyomtató esetén ellenőrizze a " "hardverbeállításokat is (memória, duplex egység, extra tálcák). Ha a " "nyomtatási minőséget nagyon magasra állítja, akkor a nyomtatási idő " "jelentősen megnőhet." #: ../../printer/printerdrake.pm_.c:1981 #, c-format msgid "Option %s must be an integer number!" msgstr "A(z) %s értéknek egész számnak kell lennie!" #: ../../printer/printerdrake.pm_.c:1985 #, c-format msgid "Option %s must be a number!" msgstr "A(z) %s értéknek számnak kell lennie!" #: ../../printer/printerdrake.pm_.c:1989 #, c-format msgid "Option %s out of range!" msgstr "A(z) %s érték nem esik a megfelelő tartományba!" #: ../../printer/printerdrake.pm_.c:2028 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Be szeretné állítani a(z) \"%s\"\n" "nyomtatót alapértelmezettnek?" #: ../../printer/printerdrake.pm_.c:2051 msgid "Test pages" msgstr "Tesztoldalak" #: ../../printer/printerdrake.pm_.c:2052 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Válassza ki a kinyomtatni kívánt tesztoldalakat.\n" "Megjegyzés: a fényképes tesztoldal kinyomtatása sokáig eltarthat, sőt egyes, " "kevés memóriával ellátott lézernyomtatókon el sem fog készülni. Általában " "elég a normál tesztoldalt kinyomtatni." #: ../../printer/printerdrake.pm_.c:2056 msgid "No test pages" msgstr "Nem kell tesztoldal" #: ../../printer/printerdrake.pm_.c:2057 msgid "Print" msgstr "Nyomtatás" #: ../../printer/printerdrake.pm_.c:2114 msgid "Standard test page" msgstr "Normál tesztoldal" #: ../../printer/printerdrake.pm_.c:2117 msgid "Alternative test page (Letter)" msgstr "Más tesztoldal (Letter)" #: ../../printer/printerdrake.pm_.c:2120 msgid "Alternative test page (A4)" msgstr "Más tesztoldal (A4)" #: ../../printer/printerdrake.pm_.c:2122 msgid "Photo test page" msgstr "Fényképes tesztoldal" #: ../../printer/printerdrake.pm_.c:2126 msgid "Do not print any test page" msgstr "Ne nyomtasson tesztoldalt" #: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285 msgid "Printing test page(s)..." msgstr "A tesztoldal(ak) nyomtatása folyik..." #: ../../printer/printerdrake.pm_.c:2159 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "A tesztoldal(aka)t elküldtem a nyomtatóra.\n" "Eltarthat egy ideig, amíg a nyomtatás elindul.\n" "Nyomtatási állapot:\n" "%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2163 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "A tesztoldal(aka)t elküldtem a nyomtatóra.\n" "Eltarthat egy ideig, amíg a nyomtatás elindul.\n" #: ../../printer/printerdrake.pm_.c:2170 msgid "Did it work properly?" msgstr "Sikerült a nyomtatás?" #: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229 msgid "Raw printer" msgstr "\"Nyers\" nyomtató" #: ../../printer/printerdrake.pm_.c:2216 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Egy fájl parancssorból (terminálablakból) való nyomtatásához használhatja a " "következő parancsot: \"%s \" vagy egy grafikus felületű " "nyomtatóeszközt: \"xpp \" illetve \"kprinter \". A grafikus " "eszközök lehetővé teszik a nyomtató kijelölését és a beállítások egyszerű " "módosítását.\n" #: ../../printer/printerdrake.pm_.c:2218 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Ezeket a parancsokat használhatja számos alkalmazás nyomtatási " "párbeszédablakában is (a nyomtatási parancsot megadó mezőben), de ott ne " "adjon meg fájlnevet, mert a fájlt az alkalmazás fogja biztosítani.\n" #: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238 #: ../../printer/printerdrake.pm_.c:2248 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "A(z) \"%s\" parancs szintén lehetővé teszi a beállítások módosítását egy " "bizonyos nyomtatási feladatra vonatkozóan. Egyszerűen adja hozzá a kívánt " "paramétereket a parancshoz, például: \"%s \". " #: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s\n" "\n" msgstr "" "Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor " "olvassa el a lentebbi listát, vagy kattintson a \"Nyomtatási beállítások " "listája\" gombra.%s%s\n" "\n" #: ../../printer/printerdrake.pm_.c:2228 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Itt láthatók az aktuális nyomtató nyomtatási opciói:\n" "\n" #: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a " "következő parancsot: \"%s \".\n" #: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245 #: ../../printer/printerdrake.pm_.c:2255 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Ezt a parancsot használhatja számos alkalmazás nyomtatási párbeszédablakában " "is (a nyomtatási parancsot megadó mezőben), de ott ne adjon meg fájlnevet, " "mert a fájlt az alkalmazás fogja biztosítani.\n" #: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Ha szeretne egy listát az aktuális nyomtatóhoz használható opciókról, akkor " "kattintson a \"Nyomtatási beállítások listája\" gombra." #: ../../printer/printerdrake.pm_.c:2253 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Egy fájl parancssorból (terminálablakból) való nyomtatásához használja a " "következő parancsot: \"%s \" vagy ezt: \"%s \".\n" #: ../../printer/printerdrake.pm_.c:2257 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "Az opciók beállításához és a nyomtatási feladatok kezeléséhez használhatja " "az \"xpdq\" grafikus felületet is.\n" "Ha munkaasztali környezetként a KDE-t használja, akkor rendelkezésére áll " "egy \"pánikgomb\" - egy \"Nyomtató leállítása\" feliratú ikon a " "munkaasztalon, amellyel azonnali jelleggel leállítható az összes nyomtatási " "feladat. Ez például papírberagadás esetén hasznos.\n" #: ../../printer/printerdrake.pm_.c:2261 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" "A(z) \"%s\" és a(z) \"%s\" parancs lehetővé teszi egy adott nyomtatási " "feladat beállításainak módosítását is. Adja hozzá a kívánt beállításokat a " "parancshoz, például: \"%s \".\n" #: ../../printer/printerdrake.pm_.c:2271 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Nyomtatás/lapolvasás/fotókártyák ezen: \"%s\"" #: ../../printer/printerdrake.pm_.c:2272 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Nyomtatás/lapolvasás ezen: \"%s\"" #: ../../printer/printerdrake.pm_.c:2274 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Nyomtatás/fotókártya-hozzáférés ezen: \"%s\"" #: ../../printer/printerdrake.pm_.c:2275 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Nyomtatás a(z) \"%s\" nyomtatóra" #: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281 #: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283 #: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307 #: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156 #: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695 #: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118 msgid "Close" msgstr "Bezárás" #: ../../printer/printerdrake.pm_.c:2281 msgid "Print option list" msgstr "Nyomtatási beállítások listája" #: ../../printer/printerdrake.pm_.c:2301 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "Az Ön többfunkciós eszközén automatikusan be lett állítva a lapolvasás. " "Lapolvasást parancssorból a \"scanimage\" programmal végezhet (\"scanimage -" "d hp:%s\" a lapolvasó megadásához, ha több is van); grafikus felületen pedig " "az \"xscanimage\" vagy az \"xsane\" programmal. Ha a GIMP programot " "használja, akkor a \"Fájl\"/\"Külső forrás\" menü megfelelő menüpontjával is " "végezhet lapolvasást. További információkat a \"man scanimage\" parancsnak a " "parancssorban való kiadásával szerezhet.\n" "\n" "Ehhez az eszközhöz ne használja a \"scannerdrake\" programot!" #: ../../printer/printerdrake.pm_.c:2322 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Az Ön nyomtatója automatikusan be lett állítva a fotókártya-meghajtóknak a " "számítógépről való eléréséhez. A fotókártyákhoz az \"MtoolsFM\" nevű " "grafikus programmal lehet hozzáférni (menüből: \"Alkalmazások\" -> " "\"Fájlkezelő eszközök\" -> \"MTools fájlkezelő\"). Parancssorban ugyanez az " "\"mtools\" programokkal lehetséges (további információkat a \"man mtools\" " "parancsnak a parancssorban való kiadásával szerezhet). A kártya " "fájlrendszere a \"p:\" meghajtó-betűjel alatt található; ha több fotókártya-" "meghajtós nyomtató van, akkor az ez után következő betűjelek lesznek a " "további meghajtókhoz felhasználva. Az \"MtoolsFM\" programban a fájllisták " "jobb felső sarkában levő mező használatával lehet váltani a meghajtók közt." #: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702 #: ../../printer/printerdrake.pm_.c:2990 msgid "Reading printer data..." msgstr "A nyomtatóadatok beolvasása..." #: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391 #: ../../printer/printerdrake.pm_.c:2426 msgid "Transfer printer configuration" msgstr "A nyomtatóbeállítások átvitele" #: ../../printer/printerdrake.pm_.c:2365 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" "A(z) %s sorkezelő nyomtatóbeállításai átmásolhatók a(z) %s sorkezelő (amely " "az aktuális sorkezelő) számára. Az összes beállítás (nyomtatónév, leírás, " "hely, kapcsolódási típus illetve alapértelmezett beállítások) át lesz véve, " "de a nyomtatási feladatok nem kerülnek át.\n" "A következő okok miatt nem minden nyomtatási sor vihető át:\n" #: ../../printer/printerdrake.pm_.c:2368 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" "A CUPS nem támogatja a Novell-alapú és a kötetlen parancsformátumú " "nyomtatókat.\n" #: ../../printer/printerdrake.pm_.c:2370 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "A PDQ csak a helyi nyomtatókat, a távoli LPD-nyomtatókat és a socket/TCP-" "alapú nyomtatókat támogatja.\n" #: ../../printer/printerdrake.pm_.c:2372 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "Az LPD és az LPRng nem támogatja az IPP-nyomtatókat.\n" #: ../../printer/printerdrake.pm_.c:2374 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Nem vihetők át azon nyomtatási sorok, amelyek nem ezzel a programmal és nem " "a \"foomatic-configure\"-rel készültek." #: ../../printer/printerdrake.pm_.c:2375 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Továbbá a gyártó által adott PPD fájlokkal beállított nyomtatók és a " "közvetlen CUPS-meghajtóval ellátott nyomtatók beállításai nem vihetők át." #: ../../printer/printerdrake.pm_.c:2376 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Jelölje ki az átviendő nyomtatókat, majd kattintson az \n" "\"Átvitel\" gombra." #: ../../printer/printerdrake.pm_.c:2379 msgid "Do not transfer printers" msgstr "Az átvitel kihagyása" #: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396 msgid "Transfer" msgstr "Átvitel" #: ../../printer/printerdrake.pm_.c:2392 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "A(z) \"%s\" nevű nyomtató már létezik itt: %s. \n" "Kattintson az \"Átvitel\" gombra annak felülírásához.\n" "Esetleg adjon meg egy másik nevet vagy hagyja ki a nyomtatót." #: ../../printer/printerdrake.pm_.c:2400 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "A nyomtató nevében csak angol betű, számjegy és az aláhúzás szerepelhet." #: ../../printer/printerdrake.pm_.c:2405 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "\"%s\" nevű nyomtató már létezik,\n" "felül szeretné írni annak beállításait?" #: ../../printer/printerdrake.pm_.c:2413 msgid "New printer name" msgstr "Új nyomtatónév" #: ../../printer/printerdrake.pm_.c:2416 #, c-format msgid "Transferring %s..." msgstr "%s átvitele..." #: ../../printer/printerdrake.pm_.c:2427 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "A korábbi alapértelmezett nyomtató (\"%s\") beállításai átvitelre kerültek. " "Az új %s nyomtatási rendszerben is ez legyen az alapértelmezett nyomtató?" #: ../../printer/printerdrake.pm_.c:2437 msgid "Refreshing printer data..." msgstr "A nyomtatóadatok frissítése..." #: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516 #: ../../printer/printerdrake.pm_.c:2528 msgid "Configuration of a remote printer" msgstr "Távoli nyomtató beállítása" #: ../../printer/printerdrake.pm_.c:2446 msgid "Starting network..." msgstr "A hálózat elindítása..." #: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483 #: ../../printer/printerdrake.pm_.c:2485 msgid "Configure the network now" msgstr "Hálózat beállítása most" #: ../../printer/printerdrake.pm_.c:2480 msgid "Network functionality not configured" msgstr "Hálózati funkciók nincsenek beállítva" #: ../../printer/printerdrake.pm_.c:2481 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Egy távoli nyomtató beállítása következik. Ehhez működő hálózati hozzáférés " "szükséges, viszont az Ön hálózata még nincsen beállítva. Ha továbblép a " "hálózat beállítása nélkül, akkor nem lesz lehetősége a most beállítandó " "nyomtató használatára. Mit szeretne tenni?" #: ../../printer/printerdrake.pm_.c:2484 msgid "Go on without configuring the network" msgstr "Folytatás a hálózat beállítása nélkül" #: ../../printer/printerdrake.pm_.c:2518 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" "A telepítés közben végezhető hálózatbeállítás nem indítható el. A gép " "újraindítása után vizsgálja meg, hogy a hálózat elérhető-e, és javítsa ki a " "beállításokat a Mandrake Vezérlőközpont \"Hálózat és internet\"/\"Kapcsolat" "\" részében, azután állítsa be a nyomtatót a Mandrake Vezérlőközpont " "\"Hardver\"/\"Nyomtató\" részében." #: ../../printer/printerdrake.pm_.c:2519 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "A hálózati hozzáférés nem volt elindítva, és az elindítása sem lehetséges. " "Ellenőrizze a beállításokat és a hardvert, majd próbálkozzon újra a távoli " "nyomtató beállításával." #: ../../printer/printerdrake.pm_.c:2529 msgid "Restarting printing system..." msgstr "A nyomtatási rendszer újraindítása..." #: ../../printer/printerdrake.pm_.c:2568 msgid "high" msgstr "magas" #: ../../printer/printerdrake.pm_.c:2568 msgid "paranoid" msgstr "paranoiás" #: ../../printer/printerdrake.pm_.c:2569 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Nyomtatórendszer telepítése a következő biztonsági szinten: %s" #: ../../printer/printerdrake.pm_.c:2570 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Most a(z) %s nyomtatási rendszer telepítése következik egy \"%s\" biztonsági " "szinten működő gépre.\n" "\n" "Ez a nyomtatási rendszer egy szolgáltatást (háttérfolyamatot) futtat, amely " "nyomtatási feladatokra vár és kezeli azokat. Ez a szolgáltatás elérhető " "távoli gépekről is a hálózaton keresztül, ezért támadási felületet nyújthat. " "Emiatt alapértelmezésben csak néhány kiválasztott szolgáltatás kerül " "elindításra ezen a biztonsági szinten.\n" "\n" "Biztos abban, hogy be szeretne állítani nyomtatást ezen a gépen?" #: ../../printer/printerdrake.pm_.c:2604 msgid "Starting the printing system at boot time" msgstr "A nyomtatási rendszer elindítása a rendszer indulásakor" #: ../../printer/printerdrake.pm_.c:2605 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "A nyomtatási rendszer (%s) nem kerül automatikus elindításra a gép " "indulásakor.\n" "\n" "Elképzelhető, hogy az automatikus indítás ki lett kapcsolva egy magasabb " "biztonsági szintre való váltással, mivel a nyomtatási rendszer támadási " "felületet nyújthat.\n" "\n" "Szeretné a nyomtatási rendszer automatikus indítását ismét bekapcsolni?" #: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765 msgid "Checking installed software..." msgstr "A telepített szoftverek ellenőrzése..." #: ../../printer/printerdrake.pm_.c:2630 #, fuzzy, c-format msgid "Removing %s ..." msgstr "%s eltávolítása" #: ../../printer/printerdrake.pm_.c:2636 #, fuzzy, c-format msgid "Installing %s ..." msgstr "Csomagok telepítése..." #: ../../printer/printerdrake.pm_.c:2685 msgid "Select Printer Spooler" msgstr "Válassza ki a nyomtatási rendszert" #: ../../printer/printerdrake.pm_.c:2686 msgid "Which printing system (spooler) do you want to use?" msgstr "Melyik nyomtatási rendszert (sorkezelőt) szeretné használni?" #: ../../printer/printerdrake.pm_.c:2720 #, c-format msgid "Configuring printer \"%s\"..." msgstr "A(z) \"%s\" nyomtató beállítása..." #: ../../printer/printerdrake.pm_.c:2731 msgid "Installing Foomatic..." msgstr "A Foomatic telepítése..." #: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838 #: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300 msgid "Printer options" msgstr "Nyomtatóbeállítások" #: ../../printer/printerdrake.pm_.c:2810 msgid "Preparing Printerdrake..." msgstr "A PrinterDrake előkészítése..." #: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369 msgid "Configuring applications..." msgstr "Alkalmazások beállítása..." #: ../../printer/printerdrake.pm_.c:2845 msgid "Would you like to configure printing?" msgstr "Szeretné beállítani a nyomtatókezelést?" #: ../../printer/printerdrake.pm_.c:2857 msgid "Printing system: " msgstr "Nyomtatási rendszer: " #: ../../printer/printerdrake.pm_.c:2915 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" "OpenOffice.org/GIMP." msgstr "" "A következő nyomtatók vannak beállítva. Ha módosítani szeretné egy nyomtató " "beállításait, vagy alapértelmezetté kíván tenni egy nyomtatót, vagy le " "szeretné kérdezni egy nyomtató adatait, vagy egy távoli CUPS-kiszolgálón " "levő nyomtatót elérhetővé szeretne tenni a StarOffice/OpenOffice.org/GIMP " "program számára, akkor kattintson duplán a megfelelő nyomtatóra." #: ../../printer/printerdrake.pm_.c:2916 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "A következő nyomtatók vannak beállítva. Egy nyomtató beállításainak " "módosításához, egy nyomtató alapértelmezetté tételéhez vagy az adatainak a " "lekérdezéséhez kattintson duplán a megfelelő nyomtatóra." #: ../../printer/printerdrake.pm_.c:2942 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Nyomtatók listájának frissítése (az összes elérhető távoli CUPS-nyomtató " "megjelenítése érdekében)" #: ../../printer/printerdrake.pm_.c:2960 msgid "Change the printing system" msgstr "Nyomtatási rendszer módosítása" #: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274 msgid "Normal Mode" msgstr "Normál mód" #: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176 #: ../../printer/printerdrake.pm_.c:3363 msgid "Do you want to configure another printer?" msgstr "Szeretne beállítani egy másik nyomtatót?" #: ../../printer/printerdrake.pm_.c:3211 msgid "Modify printer configuration" msgstr "A nyomtatóbeállítás módosítása" #: ../../printer/printerdrake.pm_.c:3213 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Nyomtató: %s\n" "Mit szeretne megváltoztatni ennél a nyomtatónál?" #: ../../printer/printerdrake.pm_.c:3217 msgid "Do it!" msgstr "Mehet!" #: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271 msgid "Printer connection type" msgstr "A nyomtató kapcsolódási típusa" #: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275 msgid "Printer name, description, location" msgstr "Nyomtatónév, leírás, hely" #: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293 msgid "Printer manufacturer, model, driver" msgstr "A nyomtató gyártója, típusa, meghajtóprogramja" #: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294 msgid "Printer manufacturer, model" msgstr "A nyomtató gyártója, típusa" #: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304 msgid "Set this printer as the default" msgstr "Legyen ez a nyomtató az alapértelmezett" #: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309 msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "A nyomtató felvétele a StarOffice/OpenOffice.org/GIMP programba" #: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314 msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "A nyomtató eltávolítása a StarOffice/OpenOffice.org/GIMP programból" #: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319 msgid "Print test pages" msgstr "Tesztoldalak nyomtatása" #: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321 msgid "Know how to use this printer" msgstr "Hogyan kell használni ezt a nyomtatót" #: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323 msgid "Remove printer" msgstr "Nyomtató eltávolítása" #: ../../printer/printerdrake.pm_.c:3282 #, c-format msgid "Removing old printer \"%s\"..." msgstr "A régi \"%s\" nyomtató eltávolítása..." #: ../../printer/printerdrake.pm_.c:3307 msgid "Default printer" msgstr "Az alapértelmezett nyomtató" #: ../../printer/printerdrake.pm_.c:3308 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "A(z) \"%s\" nyomtató lesz ezután az alapértelmezett nyomtató." #: ../../printer/printerdrake.pm_.c:3310 msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "A nyomtató felvétele a StarOffice/OpenOffice.org/GIMP programba" #: ../../printer/printerdrake.pm_.c:3312 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "A(z) \"%s\" nyomtató sikeresen fel lett véve a StarOffice/OpenOffice.org/" "GIMP programba." #: ../../printer/printerdrake.pm_.c:3313 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "A(z) \"%s\" nyomtatót nem sikerült felvenni a StarOffice/OpenOffice.org/GIMP " "programba." #: ../../printer/printerdrake.pm_.c:3315 msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "A nyomtató eltávolítása a StarOffice/OpenOffice.org/GIMP programból" #: ../../printer/printerdrake.pm_.c:3317 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" "A(z) \"%s\" nyomtató sikeresen el lett távolítva a StarOffice/OpenOffice.org/" "GIMP programból." #: ../../printer/printerdrake.pm_.c:3318 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "A(z) \"%s\" nyomtatót nem sikerült eltávolítani a StarOffice/OpenOffice.org/" "GIMP programból." #: ../../printer/printerdrake.pm_.c:3325 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Biztosan el szeretné távolítani a(z) \"%s\" nyomtatót?" #: ../../printer/printerdrake.pm_.c:3329 #, c-format msgid "Removing printer \"%s\"..." msgstr "A(z) \"%s\" nyomtató eltávolítása..." #: ../../raid.pm_.c:35 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Nem tudok partíciót hozzáadni a _formázott_ RAID md%d bejegyzéshez" #: ../../raid.pm_.c:137 msgid "mkraid failed" msgstr "mkraid sikertelen" #: ../../raid.pm_.c:137 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "Az mkraid végrehajtása nem sikerült (talán hiányzik a raidtools?)" #: ../../raid.pm_.c:153 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Nincs elég partíció a RAID %d szinthez\n" #: ../../security/main.pm_.c:36 msgid "" "Standard: This is the standard security recommended for a computer that will " "be used to connect\n" " to the Internet as a client.\n" "\n" "High: There are already some restrictions, and more automatic checks " "are run every night.\n" "\n" "Higher: The security is now high enough to use the system as a server " "which can accept\n" " connections from many clients. If your machine is only a " "client on the Internet, you\n" "\t should choose a lower level.\n" "\n" "Paranoid: This is similar to the previous level, but the system is entirely " "closed and security\n" " features are at their maximum\n" "\n" "Security Administrator:\n" " If the 'Security Alerts' option is set, security alerts will " "be sent to this user (username or\n" "\t email)" msgstr "" "Szabványos: Ez a szabványos biztonsági szint, amely akkor javasolt, ha a gép " "kliensként fog\n" " kapcsolódni az internetre.\n" "\n" "Magas: Már vannak bizonyos megszorítások és több automatikus ellenőrzés " "fut éjszakánként.\n" "\n" "Magasabb: Ez a biztonsági szint már elég magas ahhoz, hogy a gép " "kiszolgálóként legyen\n" " használva - hálózaton keresztül csatlakozó kliensek " "kiszolgálására. Ha a gép az\n" " interneten csak kliensként van jelen, akkor érdemesebb egy " "alacsonyabb szintet\n" " választani.\n" "\n" "Paranoiás: Az előző szinthez hasonló, de itt a rendszer teljesen zárt. Ez a " "legbiztonságosabb\n" " szint.\n" "\n" "Biztonsági adminisztrátor:\n" " Ha a 'Biztonsági figyelmeztetések' opció be van állítva, akkor a " "biztonsággal\n" " kapcsolatos figyelmeztetések a megadott felhasználónak lesznek " "elküldve\n" " (felhasználói névre vagy email-címre)." #: ../../security/main.pm_.c:66 msgid "Security Level:" msgstr "Biztonsági szint:" #: ../../security/main.pm_.c:77 #, fuzzy, c-format msgid " (default value: %s)" msgstr " (alapértelmezés: %s)" #: ../../security/main.pm_.c:113 msgid "Security Alerts:" msgstr "Biztonsági figyelmeztetések:" #: ../../security/main.pm_.c:115 msgid "Security Administrator:" msgstr "Biztonsági adminisztrátor:" #: ../../security/main.pm_.c:128 msgid "Network Options" msgstr "Hálózati opciók" #: ../../security/main.pm_.c:128 msgid "System Options" msgstr "Rendszerbeállítások" #: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164 msgid "" "The following options can be set to customize your\n" "system security. If you need explanations, click on Help.\n" msgstr "" "A következő opciókkal be lehet állítani a rendszer biztonságát.\n" "Ha magyarázatra van szüksége, kattintson a Segítség gombra.\n" #: ../../security/main.pm_.c:177 msgid "Periodic Checks" msgstr "Periodikus ellenőrzések" #: ../../security/main.pm_.c:191 msgid "Please wait, setting security level..." msgstr "Biztonsági szint beállítása..." #: ../../security/main.pm_.c:197 msgid "Please wait, setting security options..." msgstr "Biztonsági opciók beállítása..." #: ../../services.pm_.c:19 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Az ALSA (Advanced Linux Sound Architecture) hangrendszer elindítása" #: ../../services.pm_.c:20 msgid "Anacron a periodic command scheduler." msgstr "Anacron, a parancsidőzítő." #: ../../services.pm_.c:21 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "Az apmd monitorozza a telepek állapotát és naplóz a syslog-ba.\n" "Segítségével leállítható a gép, mielőtt a telep lemerül." #: ../../services.pm_.c:23 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Az \"at\" parancs által ütemezett utasításokat hajtja végre a megadott\n" "időpontban, valamint kötegelt (batch-elt) parancsokat futtat, amikor\n" "a gép terhelése alacsony." #: ../../services.pm_.c:25 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "A cron a szabványos parancsütemező program a UNIX operációs rendszereken.\n" "Segítségével programokat lehet futtatni megadott időpontokban. A vixie cron\n" "fejlettebb az alap cronnál: biztonságosabb és több beállítási lehetőséggel\n" "rendelkezik." #: ../../services.pm_.c:28 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "A GPM egértámogatást biztosít a szöveg-alapú (konzolos) linuxos\n" "alkalmazások (mint például a Midnight Commander) számára. Lehetőséget\n" "nyújt egérrel való másolásra illetve beillesztésre, valamint\n" "felbukkanó menük használatára (konzolon)." #: ../../services.pm_.c:31 msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "A HardDrake a gép hardverének ellenőrzésére szolgál. Lehetővé teszi az új\n" "vagy megváltozott hardver megfelelő beállítását." #: ../../services.pm_.c:33 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Az Apache egy WWW szerver. HTML fájlokat és CGI-t tesz elérhetővé\n" "a hálózaton keresztül." #: ../../services.pm_.c:34 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Az \"internet szuperszerver szolgáltatás\" (inetd) felelős sok hálózati\n" "szolgáltatás indításáért, mint például telnet, ftp, rsh és rlogin. Az inetd\n" "leállításával minden általa irányított szolgáltatás leáll." #: ../../services.pm_.c:38 msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "A csomagszűrés bekapcsolása a Linux kernel 2.2-es változatához.\n" "Lehetővé teszi tűzfal beállítását, hogy a hálózat felőli támadások\n" "kivédhetők legyenek." #: ../../services.pm_.c:40 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Ez a csomag tölti be a billentyűzetkiosztást, ami a\n" "/etc/sysconfig/keyboard -ban állítható be. A beállítás megváltoztatható\n" "a kbdconfig programmal. Ezt bekapcsolva kell hagyni a legtöbb rendszeren." #: ../../services.pm_.c:43 msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "A kernel fejlécének automatikus újragenerálása a /boot-ban a\n" "/usr/include/linux/{autoconf,version}.h alapján" #: ../../services.pm_.c:45 msgid "Automatic detection and configuration of hardware at boot." msgstr "" "A hardvereszközök automatikus felismerése és beállítása a rendszer " "indulásakor." #: ../../services.pm_.c:46 msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "A Linuxconf elvégez bizonyos feladatokat a rendszer indításakor,\n" "hogy a beállítások konzisztensek maradjanak." #: ../../services.pm_.c:48 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "Az lpd nyomtatószolgáltatás szükséges az lpr rendes működéséhez. Az lpd\n" "alapjában véve egy nyomtatószerver, elrendezi a nyomtatásokat a különböző\n" "nyomtatók között." #: ../../services.pm_.c:50 msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, nagyteljesítményű, nagy rendelkezésre állású\n" "kiszolgáló kialakításához használható." #: ../../services.pm_.c:52 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "A named (BIND) egy DNS, azaz tartománynév-kiszolgáló, ennek segítségével\n" "feleltetik meg a gépek az IP-címeket és a gépneveket." #: ../../services.pm_.c:53 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Fel- illetve lecsatolja (mount-olja illetve unmount-olja) a különböző\n" "hálózati fájlrendszereket, mint például az NFS, az SMB\n" "(LAN Manager/Windows) és az NCP (NetWare)." #: ../../services.pm_.c:55 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Aktiválja vagy deaktiválja a rendszerindításnál automatikusan induló\n" "hálózati csatolókat." #: ../../services.pm_.c:57 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "Az NFS egy népszerű, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n" "Ez a szolgáltatás egy NFS-kiszolgáló; beállítása a /etc/exports\n" "fájllal történik." #: ../../services.pm_.c:60 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "Az NFS egy népszerű, TCP/IP hálózaton használatos fájlmegosztási protokoll.\n" "Ez a szolgáltatás az NFS lock-olást oldja meg." #: ../../services.pm_.c:62 msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "A NumLock automatikus bekapcsolása indításkor a konzolon és az\n" "XFree-ben." #: ../../services.pm_.c:64 msgid "Support the OKI 4w and compatible winprinters." msgstr "Az OKI 4w és az azzal kompatibilis windowsos nyomtatók támogatása." #: ../../services.pm_.c:65 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "A PCMCIA-támogatásra általában azoknak a laptop-felhasználóknak van\n" "szükségük, akik PCMCIA modemet vagy hálózati kártyát használnak a gépükben.\n" "A szolgáltatás nem indul el, ha nincs beállítva, tehát nyugodtan fel lehet\n" "telepíteni olyan gépre is, ahol nincs rá szükség." #: ../../services.pm_.c:68 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "A portmapper kezeli az RPC kapcsolatokat, ezekre többek között a NIS-nek és\n" "az NFS-nek van szüksége. A portmap szerverre csak a (NIS vagy NFS) szerver\n" "gépeken van szükség." #: ../../services.pm_.c:71 msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "A Postfix egy levéltovábbító (MTA) program, amely a leveleket továbbítja\n" "a különböző gépek között." #: ../../services.pm_.c:72 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Elmenti és visszaállítja a rendszer entrópia-tárolóját, így jobb\n" "véletlenszámokat lehet generálni." #: ../../services.pm_.c:74 msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle" msgstr "" "Közvetlen elérésű (raw) eszközök blokkeszközökhöz való rendelése (például\n" "merevlemezes partíciókhoz), hogy az alkalmazásokból (például: Oracle)\n" "hozzáférhetők legyenek." #: ../../services.pm_.c:76 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "A routed szolgáltatás lehetővé teszi, hogy a RIP protokoll segítségével\n" "automatikusan frissüljön az IP protokoll által használt útválasztótábla\n" "(IP routing table).\n" "A RIP elterjedt a kis hálózatokon; a nagyobb, bonyolultabb hálózatok más\n" "útválasztó-protokollokat igényelnek." #: ../../services.pm_.c:79 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Az rstat protokoll segítségével a felhasználók információt kaphatnak a\n" "(lokális) hálózaton működő gépekről." #: ../../services.pm_.c:81 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Az rusers protokoll segítségével a felhasználók lekérdezhetik, hogy melyik\n" "gépre ki van bejelentkezve." #: ../../services.pm_.c:83 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Az rwho protokoll segítségével távoli felhasználók kaphatnak egy listát\n" "az rwho szolgáltatást futtató gép aktuális felhasználóiról (olyan, mint a\n" "finger)." #: ../../services.pm_.c:85 msgid "Launch the sound system on your machine" msgstr "A gép hangrendszerének elindítása" #: ../../services.pm_.c:86 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "A syslog-on keresztül naplóznak a szolgáltatások különböző naplófájlokba.\n" "A syslog használata mindig ajánlott." #: ../../services.pm_.c:88 msgid "Load the drivers for your usb devices." msgstr "Az USB-eszközök meghajtóinak betöltése." #: ../../services.pm_.c:89 msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Elindítja az X betűtípus-kiszolgálóját (erre szükség van az XFree " "használatához)." #: ../../services.pm_.c:115 ../../services.pm_.c:157 msgid "Choose which services should be automatically started at boot time" msgstr "Válassza ki, mely szolgáltatások induljanak el rendszerindításkor" #: ../../services.pm_.c:127 msgid "Printing" msgstr "Nyomtatás" #: ../../services.pm_.c:128 msgid "Internet" msgstr "Internet" #: ../../services.pm_.c:131 msgid "File sharing" msgstr "Fájlmegosztás" #: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709 msgid "System" msgstr "Rendszer" #: ../../services.pm_.c:138 msgid "Remote Administration" msgstr "Távoli adminisztráció" #: ../../services.pm_.c:146 msgid "Database Server" msgstr "Adatbázis-kiszolgáló" #: ../../services.pm_.c:175 #, c-format msgid "Services: %d activated for %d registered" msgstr "Szolgáltatások: %d aktivált, %d regisztrált" #: ../../services.pm_.c:191 msgid "Services" msgstr "Szolgáltatások" #: ../../services.pm_.c:203 msgid "running" msgstr "fut" #: ../../services.pm_.c:203 msgid "stopped" msgstr "leállítva" #: ../../services.pm_.c:217 msgid "Services and deamons" msgstr "Szolgáltatások és démonok" #: ../../services.pm_.c:222 msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Nem érhető el további információ\n" "erről a szolgáltatásról." #: ../../services.pm_.c:229 msgid "On boot" msgstr "Indításkor" #: ../../services.pm_.c:241 msgid "Start" msgstr "Start" #: ../../services.pm_.c:241 msgid "Stop" msgstr "Stop" #: ../../share/advertising/01-thanks.pl_.c:9 msgid "Thank you for choosing Mandrake Linux 9.0" msgstr "Köszönjük, hogy a Mandrake Linux 9.0 rendszert választotta" #: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" msgstr "Üdvözöljük a Nyílt Forráskód világában" #: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" "A MandrakeSoft cég sikere a Szabad Szoftver elven alapul. Az Ön új operációs " "rendszere a világméretű Linux-közösség együttműködő munkájának eredménye." #: ../../share/advertising/02-community.pl_.c:9 msgid "Get involved in the Free Software world" msgstr "Csatlakozzon a Szabad Szoftver világához" #: ../../share/advertising/02-community.pl_.c:10 msgid "Want to know more about the Open Source community?" msgstr "Szeretne többet tudni a Nyílt Forráskód közösségről?" #: ../../share/advertising/02-community.pl_.c:11 msgid "" "To share your own knowledge and help build Linux tools, join the discussion " "forums you'll find on our \"Community\" webpages" msgstr "" "Ossza meg ismereteit másokkal és járuljon hozzá linuxos eszközök " "fejlesztéséhez - csatlakozzon a közösségi (\"Community\") weblapjainkon " "található fórumokhoz" #: ../../share/advertising/03-internet.pl_.c:9 msgid "Get the most from the Internet" msgstr "Használja fel az internet szolgáltatásait" #: ../../share/advertising/03-internet.pl_.c:10 msgid "" "Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " "view animations with Mozilla and Konqueror, or read your mail and handle " "your personal information with Evolution and Kmail" msgstr "" "A Mandrake Linux 9.0 rendszerben a legjobb programokat találja. Böngésszen a " "weben és nézzen animációkat a Mozillával vagy a Konquerorral; olvassa " "leveleit és kezelje személyes információit az Evolutionnel vagy a " "KMaillel; ..." #: ../../share/advertising/04-multimedia.pl_.c:9 msgid "Discover the most up-to-date graphical and multimedia tools!" msgstr "Fedezze fel a legújabb grafikai és multimédiás eszközöket!" #: ../../share/advertising/04-multimedia.pl_.c:10 msgid "Push multimedia to its limits!" msgstr "Használja ki a multimédia lehetőségeit!" #: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" "Mandrake Linux 9.0 enables you to use the very latest software to play audio " "files, edit and handle your images or photos, and play videos" msgstr "" "A Mandrake Linux 9.0 a legújabb programokat tartalmazza zene és videók " "lejátszásához valamint képek szerkesztéséhez és kezeléséhez" #: ../../share/advertising/05-games.pl_.c:9 msgid "Games" msgstr "Játékok" #: ../../share/advertising/05-games.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " "strategy, ..." msgstr "" "A Mandrake Linux 9.0 a nyílt forráskódú játékok legjobbját nyújtja - " "ügyességi játékok, akció, stratégia, ..." #: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49 msgid "Mandrake Control Center" msgstr "Mandrake Vezérlőközpont" #: ../../share/advertising/06-mcc.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " "your machine" msgstr "" "A Mandrake Linux 9.0 Vezérlőközponttal testreszabható és beállítható az " "egész rendszer" #: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "Felhasználói felületek" #: ../../share/advertising/07-desktop.pl_.c:10 msgid "" "Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully " "modified: KDE 3, Gnome 2, WindowMaker, ..." msgstr "" "A Mandrake Linux 9.0 rendszerben 11 különböző - teljesen testreszabható - " "felhasználói felület közül lehet választani: KDE 3, GNOME 2, WindowMaker, ..." #: ../../share/advertising/08-development.pl_.c:9 msgid "Development simplified" msgstr "Egyszerű fejlesztés" #: ../../share/advertising/08-development.pl_.c:10 msgid "Mandrake Linux 9.0 is the ultimate development platform" msgstr "A Mandrake Linux 9.0 a legjobb fejlesztői környezet" #: ../../share/advertising/08-development.pl_.c:11 msgid "" "Use the full power of the GNU gcc 3 compiler as well as the best Open Source " "development environments" msgstr "" "Használja fel a GNU GCC 3 fordító és a legjobb nyílt forráskódú " "fejlesztőkörnyezetek erejét" #: ../../share/advertising/09-server.pl_.c:9 msgid "Turn your machine into a reliable server" msgstr "Alakítsa gépét egy megbízható kiszolgálóvá" #: ../../share/advertising/09-server.pl_.c:10 msgid "" "Transform your machine into a powerful Linux server with a few clicks of " "your mouse: Web server, mail, firewall, router, file and print server, ..." msgstr "" "Alakítsa gépét linuxos kiszolgálóvá néhány egérkattintással: webkiszolgáló, " "email, tűzfal, útválasztó, fájlkiszolgáló, nyomtatókiszolgáló, ..." #: ../../share/advertising/10-mnf.pl_.c:9 msgid "Optimize your security" msgstr "Növelje a gép biztonságát" #: ../../share/advertising/10-mnf.pl_.c:10 msgid "" "The MandrakeSecurity range includes the Multi Network Firewall product (M.N." "F.)" msgstr "" "A MandrakeSecurity termékek közt megtalálható a Multi Network Firewall nevű " "tűzfal (M.N.F.)" #: ../../share/advertising/10-mnf.pl_.c:11 msgid "" "This firewall product includes network features that allow you to fulfill " "all your security needs" msgstr "" "Ez a tűzfaltermék olyan hálózati funkciókat valósít meg, amelyek az összes " "biztonsági igénynek megfelelnek" #: ../../share/advertising/10-mnf.pl_.c:12 msgid "This product is available on MandrakeStore website" msgstr "A termék a MandrakeStore weblapon érhető el" #: ../../share/advertising/11-mdkstore.pl_.c:9 msgid "The official MandrakeSoft store" msgstr "A hivatalos MandrakeSoft-áruház" #: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies,\" are available online on our e-store:" msgstr "" "Linuxos megoldások teljes skálája, speciális termékajánlatok, valamint egyéb " "árucikkek elektronikus üzletünkben:" #: ../../share/advertising/12-mdkstore.pl_.c:9 msgid "Strategic partners" msgstr "Stratégiai partnerek" #: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" "MandrakeSoft works alongside a selection of companies offering professional " "solutions compatible with Mandrake Linux. A list of these partners is " "available on the MandrakeStore" msgstr "" "A MandrakeSoft együttműködik több, a Mandrake Linuxszal kapcsolatos " "professzionális megoldásokat kínáló céggel. A partnerek listája elérhető a " "MandrakeStore webhelyén." #: ../../share/advertising/13-mdkcampus.pl_.c:9 msgid "Discover MandrakeSoft's training catalogue Linux-Campus" msgstr "Fedezze fel a MandrakeSoft oktatási anyagait: Linux-Campus" #: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" "The training program has been created to respond to the needs of both end " "users and experts (Network and System administrators)" msgstr "" "Az oktatási programot a végfelhasználók és a szakértők (hálózati- és " "rendszeradminisztrátorok) igényei alapján hoztuk létre" #: ../../share/advertising/13-mdkcampus.pl_.c:11 msgid "Certify yourself on Linux" msgstr "Szerezzen linuxos képesítést" #: ../../share/advertising/13-mdkcampus.pl_.c:12 msgid "" "Whether you choose to teach yourself online or via our network of training " "partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " "certification program (worldwide professional technical certification)" msgstr "" "Akár a weben keresztül tanul, akár az oktatási partnereinken keresztül, a " "Linux-Campus oktatási anyag felkészíti Önt az elismert világméretű " "professzionális LPI vizsgaprogramra" #: ../../share/advertising/14-mdkexpert.pl_.c:9 msgid "Become a MandrakeExpert" msgstr "Legyen Mandrake-szakértő (MandrakeExpert)" #: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform" msgstr "" "Találjon megoldást a felmerülő problémáira a MandrakeSoft webes támogatási " "rendszerével" #: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" "Csatlakozzon a MandrakeSoft támogatási csapataihoz és a linuxos közösséghez, " "hogy megoszthassa ismereteit és elismert szakértőként segítséget nyújthasson " "másoknak a támogatási weboldalakon keresztül:" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 msgid "MandrakeExpert Corporate" msgstr "Mandrake-szakértő - vállalati" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 msgid "An online platform to respond to company's specific support needs" msgstr "Webes támogatási rendszer vállalati igényekhez" #: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" "Az összes bejelentést a MandrakeSoft ugyanazon szakembere fogja kezelni" #: ../../share/advertising/17-mdkclub.pl_.c:9 msgid "Discover MandrakeClub and Mandrake Corporate Club" msgstr "" "Fedezze fel a MandrakeClub és a Mandrake Corporate Club szolgáltatásokat" #: ../../share/advertising/17-mdkclub.pl_.c:10 msgid "" "MandrakeClub and Mandrake Corporate Club were created for business and " "private users of Mandrake Linux who would like to directly support their " "favorite Linux distribution while also receiving special privileges. If you " "enjoy our products, if your company benefits from our products to gain a " "competititve edge, if you want to support Mandrake Linux development, join " "MandrakeClub!" msgstr "" "A MandrakeClub és a Mandrake Corporate Club a Mandrake Linux azon magán- " "illetve üzleti felhasználóinak részére lett létrehozva, akik támogatni " "szeretnék a disztribúció fejlesztését. A tagok speciális lehetőségekhez is " "hozzájutnak. Ha meg van elégedve termékeinkkel, vagy a cége sikeresen " "használja a rendszert üzleti célokra, vagy egyszerűen csak támogatni " "szeretné a Mandrake Linux fejlesztését, csatlakozzon a MandrakeClubhoz!" #: ../../standalone.pm_.c:21 #, fuzzy msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" " Ez a program szabad szoftver; terjeszthető és/vagy módosítható\n" " a Free Software Foundation által publikált GNU General Public\n" " License 2. vagy annál újabb verziója alapján.\n" "\n" " A program annak reményében kerül terjesztésre, hogy hasznosnak\n" " bizonyul, de GARANCIA NÉLKÜL; még a PIACKÉPESSÉG illetve\n" " egy BIZONYOS CÉLRA VALÓ ALKALMASSÁG sincs garantálva. További\n" " részletek a GNU General Public License-ben.\n" "\n" " A programmal együtt Önnek kapnia kellett egy példányt a GNU General\n" " Public License-ből; ha nem így történt, írjon a következő címre:\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n" " MA 02111-1307, USA." #: ../../standalone.pm_.c:40 msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version name.\n" msgstr "" #: ../../standalone.pm_.c:51 msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone.pm_.c:57 msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm_.c:68 msgid "" "[OPTIONS]...\n" "\t --debug print debugging information" msgstr "" #: ../../standalone.pm_.c:70 msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone.pm_.c:82 #, fuzzy msgid "[keyboard]" msgstr "Billentyűzet" #: ../../standalone.pm_.c:83 msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../standalone.pm_.c:84 msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone.pm_.c:93 msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../standalone.pm_.c:94 msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../standalone.pm_.c:99 msgid "" "[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] " "[--dynamic=dev]" msgstr "" #: ../../standalone.pm_.c:100 msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone.pm_.c:114 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone.pm_.c:168 msgid "Installing packages..." msgstr "Csomagok telepítése..." #: ../../standalone/XFdrake_.c:138 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" "Jelentkezzen ki, majd nyomja meg a Ctrl+Alt+BackSpace billentyűkombinációt" #: ../../standalone/XFdrake_.c:142 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" "A módosítások csak a(z) %s programba való következő bejelentkezéskor lépnek " "érvénybe" #: ../../standalone/drakTermServ_.c:239 msgid "Mandrake Terminal Server Configuration" msgstr "A Mandrake Terminal Server beállítása" #: ../../standalone/drakTermServ_.c:253 msgid "Enable Server" msgstr "A kiszolgáló bekapcsolása" #: ../../standalone/drakTermServ_.c:260 msgid "Disable Server" msgstr "A kiszolgáló kikapcsolása" #: ../../standalone/drakTermServ_.c:268 msgid "Start Server" msgstr "A kiszolgáló elindítása" #: ../../standalone/drakTermServ_.c:275 msgid "Stop Server" msgstr "A kiszolgáló leállítása" #: ../../standalone/drakTermServ_.c:283 msgid "Etherboot Floppy/ISO" msgstr "Etherboot floppy/ISO" #: ../../standalone/drakTermServ_.c:288 msgid "Net Boot Images" msgstr "Hálózati indítási fájlok" #: ../../standalone/drakTermServ_.c:294 msgid "Add/Del Users" msgstr "Felhasználók felvétele/törlése" #: ../../standalone/drakTermServ_.c:299 msgid "Add/Del Clients" msgstr "Kliensek felvétele/törlése" #: ../../standalone/drakTermServ_.c:328 #, fuzzy msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict\\@mandrakesoft.com\n" "\n" msgstr "" " frissítések: 2002, MandrakeSoft - Stew Benedict " #: ../../standalone/drakTermServ_.c:332 msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:365 msgid "" "drakTermServ Overview\n" "\t\t\t \n" " - Create Etherboot Enabled Boot Images:\n" " \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image " "must be created.\n" " \t\tmkinitrd-net does much of this work and drakTermServ is just a " "graphical interface\n" " \t\tto help manage/customize these images.\n" "\n" " - Maintain /etc/dhcpd.conf:\n" " \t\tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP address\n" " \t\tand net boot images to the machine. drakTermServ helps create/" "remove these entries.\n" "\t\t\t\n" " \t\t(PCI cards may omit the image - etherboot will request the " "correct image. You should\n" " \t\talso consider that when etherboot looks for the images, it " "expects names like\n" " \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \t\tA typical dhcpd.conf stanza to support a diskless client looks " "like:\n" " \t\t\n" "\t\t\t\thost curly {\n" "\t\t\t\t\thardware ethernet 00:20:af:2f:f7:9d;\n" "\t\t\t\t\tfixed-address 192.168.192.3;\n" "\t\t\t\t\t/*type fat;*/\n" "\t\t\t\t\tfilename \"i386/boot/boot-3c509.2.4.18-6mdk." "nbi\";\n" "\t\t\t\t}\n" "\t\t\t\n" "\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " "entry for\n" "\t\t\ta client machine, using a fixed address scheme facilitates using the " "functionality\n" "\t\t\tof client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" "\t\t\tNote: The \"/*type\" entry is only used by drakTermServ. Clients can " "either be \"thin\"*/\n" "\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run most\n" "\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\" "$IP=client_ip\\$\\$ is\n" "\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are modified\n" "\t\t\tif thin clients are used, to enable xdmcp. Since there are security " "issues in using xdmcp,\n" "\t\t\thosts.deny and hosts.allow are modified to limit access to the local " "subnet.\n" "\t\t\t\n" "\t\t\tNote: You must stop/start the server after adding or changing " "clients.\n" "\t\t\t\n" " - Maintain /etc/exports:\n" " \t\tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \t\tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \t\tdiskless clients.\n" "\n" " \t\tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t\t/ (ro,all_squash)\n" " \t\t/home SUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" "\t\t\tWith SUBNET/MASK being defined for your network.\n" " \t\t\n" " - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" " \t\tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" "\\$. drakTermServ helps\n" " \t\tin this respect by adding or removing system users from this " "file.\n" "\n" " - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future drakTermServ " "will help create these\n" " \t\tfiles.\n" "\n" " - Per client system configuration files:\n" " \t\tThrough clusternfs, each diskless client can have it's own " "unique configuration files\n" " \t\ton the root filesystem of the server. In the future, " "drakTermServ can help create files\n" " \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/" "keyboard on a per-client\n" " \t\tbasis.\n" "\n" " - /etc/xinetd.d/tftp:\n" " \t\tdrakTermServ will configure this file to work in conjunction " "with the images created by\n" " \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to each\n" " \t\tdiskless client.\n" "\n" " \t\tA typical tftp configuration file looks like:\n" " \t\t\n" " \t\tservice tftp\n" " \t\t(\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t\t}\n" " \t\t\n" " \t\tThe changes here from the default installation are changing the " "disable flag to\n" " \t\t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \t\tputs it's images.\n" "\n" " - Create etherboot floppies/CDs:\n" " \t\tThe diskless client machines need either ROM images on the NIC, " "or a boot floppy\n" " \t\tor CD to initate the boot sequence. drakTermServ will help " "generate these images,\n" " \t\tbased on the NIC in the client machine.\n" " \t\t\n" " \t\tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \t\tcat /usr/lib/etherboot/boot1a.bin /\\n \t\t\t/usr/lib/" "etherboot/lzrom/3c509.lzrom > /dev/fd0\n" " \n" "\n" msgstr "" #: ../../standalone/drakTermServ_.c:488 msgid "Boot Floppy" msgstr "Rendszerindító floppy" #: ../../standalone/drakTermServ_.c:490 msgid "Boot ISO" msgstr "Rendszerindító ISO-fájl" #: ../../standalone/drakTermServ_.c:559 msgid "Build Whole Kernel -->" msgstr "Teljes kernel elkészítése -->" #: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591 msgid "This will take a few minutes." msgstr "Ez több percig is eltarthat." #: ../../standalone/drakTermServ_.c:573 msgid "No kernel selected!" msgstr "Nincs kijelölve kernel." #: ../../standalone/drakTermServ_.c:576 msgid "Build Single NIC -->" msgstr "Egyetlen NIC-fájl készítése -->" #: ../../standalone/drakTermServ_.c:587 msgid "No nic selected!" msgstr "Nincs kijelölve NIC." #: ../../standalone/drakTermServ_.c:590 msgid "Build All Kernels -->" msgstr "Az összes kernel elkészítése -->" #: ../../standalone/drakTermServ_.c:604 msgid "<-- Delete" msgstr "<-- Törlés" #: ../../standalone/drakTermServ_.c:611 msgid "Delete All NBIs" msgstr "Az összes NBI törlése" #: ../../standalone/drakTermServ_.c:668 msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../standalone/drakTermServ_.c:673 msgid "Add User -->" msgstr "Felhasználó felvétele -->" #: ../../standalone/drakTermServ_.c:681 msgid "<-- Del User" msgstr "<-- Felhasználó törlése" #: ../../standalone/drakTermServ_.c:720 #, fuzzy, c-format msgid "type: %s" msgstr "Típus: " #: ../../standalone/drakTermServ_.c:753 msgid "No net boot images created!" msgstr "Hálózati indítási fájlok nem lettek létrehozva." #: ../../standalone/drakTermServ_.c:773 #, fuzzy msgid "Thin Client" msgstr "DHCP-kliens" #: ../../standalone/drakTermServ_.c:775 #, fuzzy msgid "Allow Thin Clients" msgstr "Kliensek felvétele/törlése" #: ../../standalone/drakTermServ_.c:778 msgid "Add Client -->" msgstr "Kliens felvétele -->" #: ../../standalone/drakTermServ_.c:821 #, fuzzy msgid "<-- Edit Client" msgstr "<-- Kliens törlése" #: ../../standalone/drakTermServ_.c:837 #, fuzzy msgid "Delete Client" msgstr "<-- Kliens törlése" #: ../../standalone/drakTermServ_.c:843 msgid "dhcpd Config..." msgstr "dhcpd beállítása..." #: ../../standalone/drakTermServ_.c:876 msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/drakTermServ_.c:894 msgid "Subnet:" msgstr "" #: ../../standalone/drakTermServ_.c:901 #, fuzzy msgid "Netmask:" msgstr "Hálózati maszk" #: ../../standalone/drakTermServ_.c:908 msgid "Routers:" msgstr "" #: ../../standalone/drakTermServ_.c:915 msgid "Subnet Mask:" msgstr "" #: ../../standalone/drakTermServ_.c:922 msgid "Broadcast Address:" msgstr "" #: ../../standalone/drakTermServ_.c:929 #, fuzzy msgid "Domain Name:" msgstr "Tartománynév" #: ../../standalone/drakTermServ_.c:937 #, fuzzy msgid "Name Servers:" msgstr "Samba-kiszolgáló" #: ../../standalone/drakTermServ_.c:948 msgid "IP Range Start:" msgstr "" #: ../../standalone/drakTermServ_.c:949 msgid "IP Range End:" msgstr "" #: ../../standalone/drakTermServ_.c:1001 msgid "dhcpd Server Configuration" msgstr "A dhcpd kiszolgáló beállítása" #: ../../standalone/drakTermServ_.c:1002 #, fuzzy msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Az értékek nagy része az aktuális rendszerből származik.\n" "Szükség esetén módosíthatja azokat." #: ../../standalone/drakTermServ_.c:1005 msgid "Dynamic IP Address Pool:" msgstr "" #: ../../standalone/drakTermServ_.c:1018 msgid "Write Config" msgstr "Beállítás mentése" #: ../../standalone/drakTermServ_.c:1120 msgid "Please insert floppy disk:" msgstr "Tegye be a floppyt:" #: ../../standalone/drakTermServ_.c:1124 msgid "Couldn't access the floppy!" msgstr "A floppy nem elérhető." #: ../../standalone/drakTermServ_.c:1126 msgid "Floppy can be removed now" msgstr "A floppyt most már ki lehet venni" #: ../../standalone/drakTermServ_.c:1129 msgid "No floppy drive available!" msgstr "Nincs elérhető floppy-meghajtó." #: ../../standalone/drakTermServ_.c:1138 #, c-format msgid "Etherboot ISO image is %s" msgstr "Az Etherboot ISO-fájl: %s" #: ../../standalone/drakTermServ_.c:1140 msgid "Something went wrong! - Is mkisofs installed?" msgstr "Valamilyen probléma merült fel. Az mkisofs telepítve van?" #: ../../standalone/drakTermServ_.c:1159 msgid "Need to create /etc/dhcpd.conf first!" msgstr "Először létre kell hozni ezt: /etc/dhcpd.conf" #: ../../standalone/drakTermServ_.c:1451 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakautoinst_.c:40 msgid "Error!" msgstr "Hiba!" #: ../../standalone/drakautoinst_.c:41 #, c-format msgid "I can't find needed image file `%s'." msgstr "Nem található a(z) \"%s\" képfájl." #: ../../standalone/drakautoinst_.c:43 msgid "Auto Install Configurator" msgstr "Az automatikus telepítés beállításai" #: ../../standalone/drakautoinst_.c:44 msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" "Egy automatikus telepítőfloppy beállítása következik. Ez veszélyes lehet, " "ezért körültekintéssel használandó.\n" "\n" "Ennek segítségével újrajátszható az Ön által ezen gépen végrehajtott " "telepítés - közben bizonyos lépéseknél kérdéseket tesz majd fel a program " "egyes értékek módosítása érdekében.\n" "\n" "A maximális biztonság kedvéért a partícionálási és formázási műveletek soha " "nem lesznek automatikusan végrehajtva, bármit is választott Ön ezen gép " "telepítése során.\n" "\n" "Kívánja folytatni?" #: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71 msgid "manual" msgstr "" #: ../../standalone/drakautoinst_.c:62 #, fuzzy msgid "replay" msgstr "Újrajátszás" #: ../../standalone/drakautoinst_.c:66 msgid "Automatic Steps Configuration" msgstr "Az automatikus lépések beállításai" #: ../../standalone/drakautoinst_.c:67 msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Adja meg mindegyik lépésnél, hogy újrajátszással vagy kézi vezérléssel " "történjen" #: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79 msgid "Creating auto install floppy" msgstr "Automatikus telepítőfloppy készítése" #: ../../standalone/drakautoinst_.c:139 msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" "Üdvözöljük.\n" "\n" "Az automatikus telepítés paraméterei a bal oldalon érhetők el" #: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504 #: ../../standalone/scannerdrake_.c:117 msgid "Congratulations!" msgstr "Gratulálunk!" #: ../../standalone/drakautoinst_.c:235 msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "A floppy létrehozása sikeresen befejeződött.\n" "A telepítés újralejátszása elvégezhető." #: ../../standalone/drakautoinst_.c:273 msgid "Auto Install" msgstr "Automatikus telepítés" #: ../../standalone/drakautoinst_.c:343 msgid "Add an item" msgstr "Elem hozzáadása" #: ../../standalone/drakautoinst_.c:350 msgid "Remove the last item" msgstr "Az utolsó elem eltávolítása" #: ../../standalone/drakbackup_.c:580 msgid "Cron not available yet as non-root" msgstr "A Cron egyelőre csak a rendszergazda számára elérhető" #: ../../standalone/drakbackup_.c:690 msgid "WARNING" msgstr "FIGYELMEZTETÉS" #: ../../standalone/drakbackup_.c:691 msgid "FATAL" msgstr "HIBA" #: ../../standalone/drakbackup_.c:692 msgid "INFO" msgstr "INFÓ" #: ../../standalone/drakbackup_.c:704 msgid "" "\n" " DrakBackup Report \n" "\n" msgstr "" "\n" " DrakBackup jelentés \n" "\n" #: ../../standalone/drakbackup_.c:705 msgid "" "\n" " DrakBackup Daemon Report\n" "\n" "\n" msgstr "" "\n" " DrakBackup szolgáltatás - jelentés\n" "\n" "\n" #: ../../standalone/drakbackup_.c:709 msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup jelentés - részletek\n" "\n" "\n" #: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803 #: ../../standalone/drakbackup_.c:859 msgid "Total progess" msgstr "Teljes előrehaladás" #: ../../standalone/drakbackup_.c:785 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" "%s létezik, törölhető?\n" "\n" "Figyelmeztetés: Ha már elvégezte ezt korábban, akkor elképzelhető,\n" "hogy a kiszolgálón el kell távolítani a bejegyzést az engedélyezett\n" "kulcsok (authorized_keys) közül." #: ../../standalone/drakbackup_.c:794 msgid "This may take a moment to generate the keys." msgstr "A kulcsok előállítása hosszabb ideig is eltarthat." #: ../../standalone/drakbackup_.c:801 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "HIBA: Nem hajtható végre: %s." #: ../../standalone/drakbackup_.c:818 #, c-format msgid "No password prompt on %s at port %s" msgstr "Nincs jelszókérés %s ezen portján: %s" #: ../../standalone/drakbackup_.c:819 #, c-format msgid "Bad password on %s" msgstr "Hibás jelszó ezen: %s" #: ../../standalone/drakbackup_.c:820 #, c-format msgid "Permission denied transferring %s to %s" msgstr "\"%s\" nem vihető át ide: \"%s\" - engedély megtagadva" #: ../../standalone/drakbackup_.c:821 #, c-format msgid "Can't find %s on %s" msgstr "%s nem található itt: %s" #: ../../standalone/drakbackup_.c:824 #, c-format msgid "%s not responding" msgstr "%s nem válaszol" #: ../../standalone/drakbackup_.c:828 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "without being prompted for a password." msgstr "" "Az átvitel sikeres volt.\n" "A következő paranccsal ellenőrizheti, hogy be tud-e jelentkezni a\n" "kiszolgálóra anélkül, hogy jelszót kérne a gép:\n" "\n" "ssh -i %s %s\\@%s" #: ../../standalone/drakbackup_.c:873 msgid "WebDAV remote site already in sync!" msgstr "A távoli WebDAV-hely már szinkronban van." #: ../../standalone/drakbackup_.c:877 msgid "WebDAV transfer failed!" msgstr "A WebDAV-átvitel sikertelen volt." #: ../../standalone/drakbackup_.c:898 msgid "No CDR/DVDR in drive!" msgstr "Nincs CD/DVD a meghajtóban." #: ../../standalone/drakbackup_.c:902 msgid "Does not appear to be recordable media!" msgstr "Úgy tűnik, az adathordozó nem írható." #: ../../standalone/drakbackup_.c:906 msgid "Not erasable media!" msgstr "Az adathordozó nem törölhető." #: ../../standalone/drakbackup_.c:945 msgid "This may take a moment to erase the media." msgstr "Az adathordozó törlése hosszabb ideig is eltarthat." #: ../../standalone/drakbackup_.c:1033 msgid "Permission problem accessing CD." msgstr "Probléma a CD-hozzáférési engedélyekkel." #: ../../standalone/drakbackup_.c:1060 #, c-format msgid "No tape in %s!" msgstr "Nincs szalag ebben: %s." #: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223 msgid "Backup system files..." msgstr "Rendszerfájlok mentése..." #: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291 msgid "Hard Disk Backup files..." msgstr "Fájlok merevlemezes mentése..." #: ../../standalone/drakbackup_.c:1236 msgid "Backup User files..." msgstr "Felhasználói fájlok mentése..." #: ../../standalone/drakbackup_.c:1237 msgid "Hard Disk Backup Progress..." msgstr "Merevlemezes mentés folyamatban..." #: ../../standalone/drakbackup_.c:1290 msgid "Backup Other files..." msgstr "Egyéb fájlok mentése..." #: ../../standalone/drakbackup_.c:1296 msgid "No changes to backup!" msgstr "A mentés nem módosult." #: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "DrakBackup-tevékenységek ezzel: %s:\n" "\n" #: ../../standalone/drakbackup_.c:1319 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" "fájllista elküldve FTP-n: %s\n" " " #: ../../standalone/drakbackup_.c:1322 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " FTP-kapcsolati probléma: A mentésfájlok FTP-n keresztül történő küldése " "sikertelen.\n" #: ../../standalone/drakbackup_.c:1340 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "DrakBackup-tevékenységek CD-vel:\n" "\n" #: ../../standalone/drakbackup_.c:1345 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "DrakBackup-tevékenységek szalaggal:\n" "\n" #: ../../standalone/drakbackup_.c:1354 msgid " Error during mail sending. \n" msgstr " Hiba levélküldés közben. \n" #: ../../standalone/drakbackup_.c:1380 msgid "Can't create catalog!" msgstr "Katalógus nem hozható létre." #: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501 #: ../../standalone/drakfont_.c:946 msgid "File Selection" msgstr "Fájlkijelölés" #: ../../standalone/drakbackup_.c:1529 msgid "Select the files or directories and click on 'Add'" msgstr "" "Válassza ki a fájlokat illetve könyvtárakat, majd kattintson a \"Hozzáadás\" " "gombra" #: ../../standalone/drakbackup_.c:1573 msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Jelölje be azokat az opciókat, amelyekre szüksége van.\n" #: ../../standalone/drakbackup_.c:1574 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Ezekkel a funkciókkal a /etc könyvtár összes fájlja elmenthető illetve " "visszatölthető.\n" #: ../../standalone/drakbackup_.c:1575 msgid "Backup your System files. (/etc directory)" msgstr "Rendszerfájlok mentése (/etc könyvtár)" #: ../../standalone/drakbackup_.c:1576 msgid "Use incremental backup (do not replace old backups)" msgstr "Inkrementális mentés (a korábbi mentések nem lesznek felülírva)" #: ../../standalone/drakbackup_.c:1577 msgid "Do not include critical files (passwd, group, fstab)" msgstr "A kritikus fájlok kihagyása (passwd, group, fstab)" #: ../../standalone/drakbackup_.c:1578 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Ezzel az opcióval a /etc könyvtár bármely állapota\n" "visszatölthető lesz." #: ../../standalone/drakbackup_.c:1595 msgid "Please check all users that you want to include in your backup." msgstr "Jelölje ki az összes felhasználót, amelynek adatait menteni szeretné." #: ../../standalone/drakbackup_.c:1622 msgid "Do not include the browser cache" msgstr "A böngésző-gyorstár kihagyása" #: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647 msgid "Use Incremental Backups (do not replace old backups)" msgstr "Inkrementális mentések (a korábbi mentések nem lesznek felülírva)" #: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000 msgid "Remove Selected" msgstr "Kijelöltek eltávolítása" #: ../../standalone/drakbackup_.c:1679 msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: ../../standalone/drakbackup_.c:1714 msgid "Users" msgstr "Felhasználók" #: ../../standalone/drakbackup_.c:1740 msgid "Use network connection to backup" msgstr "Mentés hálózati kapcsolaton keresztül" #: ../../standalone/drakbackup_.c:1742 msgid "Net Method:" msgstr "Hálózati mód:" #: ../../standalone/drakbackup_.c:1746 msgid "Use Expect for SSH" msgstr "Expect használata SSH-hoz" #: ../../standalone/drakbackup_.c:1747 msgid "" "Create/Transfer\n" "backup keys for SSH" msgstr "" "Mentési kulcsok\n" "létrehozása/átvitele SSH-hoz" #: ../../standalone/drakbackup_.c:1748 msgid "" " Transfer \n" "Now" msgstr "" " Átvitel \n" "Most" #: ../../standalone/drakbackup_.c:1749 msgid "" "Other (not drakbackup)\n" "keys in place already" msgstr "" "A többi (nem DrakBackup-)\n" "kulcs már a helyére került" #: ../../standalone/drakbackup_.c:1753 msgid "Please enter the host name or IP." msgstr "Adja meg a gépnevet vagy az IP-címet." #: ../../standalone/drakbackup_.c:1758 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." msgstr "" "Adja meg a könyvtárt (vagy modult), amelybe a\n" " mentésfájlok kerüljenek az adott gépen." #: ../../standalone/drakbackup_.c:1763 msgid "Please enter your login" msgstr "Adja meg a felhasználói nevét" #: ../../standalone/drakbackup_.c:1768 msgid "Please enter your password" msgstr "Adja meg a jelszavát" #: ../../standalone/drakbackup_.c:1774 msgid "Remember this password" msgstr "Emlékezzen a jelszóra" #: ../../standalone/drakbackup_.c:1785 msgid "Need hostname, username and password!" msgstr "Meg kell adni egy gépnevet, egy felhasználónevet és egy jelszót." #: ../../standalone/drakbackup_.c:1879 msgid "Use CD/DVDROM to backup" msgstr "Mentés CD-re/DVD-re" #: ../../standalone/drakbackup_.c:1882 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "" "Adja meg a CD/DVD eszközt.\n" "(Az Enter billentyű lenyomására a többi mező átveszi a beállításokat.\n" "Erre a mezőre csak az űrlap kitöltése miatt van szükség.)" #: ../../standalone/drakbackup_.c:1887 msgid "Please choose your CD/DVD media size (Mb)" msgstr "Adja meg a CD/DVD adathordozó méretét (MB)" #: ../../standalone/drakbackup_.c:1893 msgid "Please check for multisession CD" msgstr "Multisession CD esetén jelölje be az opciót" #: ../../standalone/drakbackup_.c:1899 msgid "Please check if you are using CDRW media" msgstr "Ha CD-RW lemezt használ, jelölje be az opciót" #: ../../standalone/drakbackup_.c:1905 msgid "Please check if you want to erase your RW media (1st Session)" msgstr "" "Ha le kívánja törölni az újraírható adathordozót (1. session), jelölje be az " "opciót" #: ../../standalone/drakbackup_.c:1906 msgid " Erase Now " msgstr " Törlés most " #: ../../standalone/drakbackup_.c:1912 msgid "Please check if you are using a DVDR device" msgstr "Ha DVDR eszközt használ, jelölje be az opciót" #: ../../standalone/drakbackup_.c:1918 msgid "Please check if you are using a DVDRAM device" msgstr "Ha DVDRAM eszközt használ, jelölje be az opciót" #: ../../standalone/drakbackup_.c:1931 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "Adja meg a CD-író eszközazonosítóját,\n" " például: 0,1,0" #: ../../standalone/drakbackup_.c:1964 msgid "No CD device defined!" msgstr "CD-eszköz nincs definiálva." #: ../../standalone/drakbackup_.c:2012 msgid "Use tape to backup" msgstr "Mentés szalagra" #: ../../standalone/drakbackup_.c:2015 msgid "Please enter the device name to use for backup" msgstr "Adja meg a mentéshez használandó eszköznevet" #: ../../standalone/drakbackup_.c:2021 msgid "Please check if you want to use the non-rewinding device." msgstr "" "Ha a visszatekerést mellőző eszközt szeretné használni, jelölje be az opciót." #: ../../standalone/drakbackup_.c:2027 msgid "Please check if you want to erase your tape before the backup." msgstr "Ha mentés előtt le kívánja törölni a szalagot, jelölje be az opciót." #: ../../standalone/drakbackup_.c:2033 msgid "Please check if you want to eject your tape after the backup." msgstr "Ha mentés után ki szeretné dobatni a szalagot, jelölje be az opciót." #: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112 #: ../../standalone/drakbackup_.c:3068 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "" "Adja meg a DrakBackup program számára\n" " engedélyezett maximális méretet" #: ../../standalone/drakbackup_.c:2103 msgid "Please enter the directory to save to:" msgstr "Adja meg a könyvtárt, ahova menteni kell:" #: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074 msgid "Use quota for backup files." msgstr "Kvóta használata a mentésfájlokhoz." #: ../../standalone/drakbackup_.c:2180 msgid "Network" msgstr "Hálózat" #: ../../standalone/drakbackup_.c:2185 msgid "CDROM / DVDROM" msgstr "CD-ROM / DVD-ROM" #: ../../standalone/drakbackup_.c:2190 msgid "HardDrive / NFS" msgstr "Merevlemez / NFS" #: ../../standalone/drakbackup_.c:2195 msgid "Tape" msgstr "Szalag" #: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212 #: ../../standalone/drakbackup_.c:2216 msgid "hourly" msgstr "óránként" #: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213 #: ../../standalone/drakbackup_.c:2216 msgid "daily" msgstr "naponta" #: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214 #: ../../standalone/drakbackup_.c:2216 msgid "weekly" msgstr "hetente" #: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215 #: ../../standalone/drakbackup_.c:2216 msgid "monthly" msgstr "havonta" #: ../../standalone/drakbackup_.c:2229 msgid "Use daemon" msgstr "Szolgáltatás használata" #: ../../standalone/drakbackup_.c:2234 msgid "" "Please choose the time \n" "interval between each backup" msgstr "" "Adja meg a mentések közti \n" "időintervallumot" #: ../../standalone/drakbackup_.c:2240 msgid "" "Please choose the\n" "media for backup." msgstr "" "Adja meg a mentési\n" "médiumot." #: ../../standalone/drakbackup_.c:2247 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" "Note that currently all 'net' medias also use the hard drive." msgstr "" "Győződjön meg arról, hogy a cron szolgáltatás a szolgáltatások közt van. \n" "\n" "Megjegyzés: jelenleg az összes \"hálózati\" médium a merevlemezt is " "használja." #: ../../standalone/drakbackup_.c:2283 msgid "Send mail report after each backup to:" msgstr "Levél küldése minden mentés után ide:" #: ../../standalone/drakbackup_.c:2289 msgid "Delete Hard Drive tar files after backup to other media." msgstr "" "A merevlemezen levő \"tar\" fájlok törlése más médiumra való mentés után." #: ../../standalone/drakbackup_.c:2324 msgid "What" msgstr "Mit" #: ../../standalone/drakbackup_.c:2329 msgid "Where" msgstr "Hova" #: ../../standalone/drakbackup_.c:2334 msgid "When" msgstr "Mikor" #: ../../standalone/drakbackup_.c:2339 msgid "More Options" msgstr "További opciók" #: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444 msgid "Drakbackup Configuration" msgstr "A DrakBackup beállítása" #: ../../standalone/drakbackup_.c:2376 msgid "Please choose where you want to backup" msgstr "Válassza ki, hogy hova szeretne menteni" #: ../../standalone/drakbackup_.c:2378 msgid "on Hard Drive" msgstr "merevlemezre" #: ../../standalone/drakbackup_.c:2388 msgid "across Network" msgstr "hálózaton keresztül" #: ../../standalone/drakbackup_.c:2398 msgid "on CDROM" msgstr "CD-ROM-on" #: ../../standalone/drakbackup_.c:2406 msgid "on Tape Device" msgstr "szalagos eszközön" #: ../../standalone/drakbackup_.c:2449 msgid "Please choose what you want to backup" msgstr "Válassza ki, hogy mit szeretne menteni" #: ../../standalone/drakbackup_.c:2450 msgid "Backup system" msgstr "A rendszer mentése" #: ../../standalone/drakbackup_.c:2451 msgid "Backup Users" msgstr "A felhasználók adatainak mentése" #: ../../standalone/drakbackup_.c:2454 msgid "Select user manually" msgstr "Felhasználó kézi kiválasztása" #: ../../standalone/drakbackup_.c:2537 msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "Mentési források: \n" #: ../../standalone/drakbackup_.c:2538 msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Rendszerfájlok:\n" #: ../../standalone/drakbackup_.c:2540 msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Felhasználói fájlok:\n" #: ../../standalone/drakbackup_.c:2542 msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Egyéb fájlok:\n" #: ../../standalone/drakbackup_.c:2544 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Mentés merevlemezre a következő helyre: %s\n" #: ../../standalone/drakbackup_.c:2547 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- A merevlemezen levő \"tar\" fájlok törlése mentés után.\n" #: ../../standalone/drakbackup_.c:2553 msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Írás CD-re" #: ../../standalone/drakbackup_.c:2554 msgid "RW" msgstr "RW" #: ../../standalone/drakbackup_.c:2555 #, c-format msgid " on device: %s" msgstr " ezen az eszközön: %s" #: ../../standalone/drakbackup_.c:2556 msgid " (multi-session)" msgstr " (multisession)" #: ../../standalone/drakbackup_.c:2557 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" "- Mentés szalagra ezen az eszközön: %s" #: ../../standalone/drakbackup_.c:2558 #, c-format msgid "\t\tErase=%s" msgstr "\t\tTörlés=%s" #: ../../standalone/drakbackup_.c:2561 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" "- Mentés ezzel: \"%s\" a következő gépre: %s\n" #: ../../standalone/drakbackup_.c:2562 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t felhasználónév: %s\n" "\t\t útvonal: %s \n" #: ../../standalone/drakbackup_.c:2563 msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Beállítások:\n" #: ../../standalone/drakbackup_.c:2564 msgid "\tDo not include System Files\n" msgstr "\tA rendszerfájlok kihagyása\n" #: ../../standalone/drakbackup_.c:2567 msgid "\tBackups use tar and bzip2\n" msgstr "\ttar és bzip2 használata a mentésekhez\n" #: ../../standalone/drakbackup_.c:2569 msgid "\tBackups use tar and gzip\n" msgstr "\ttar és gzip használata a mentésekhez\n" #: ../../standalone/drakbackup_.c:2572 #, c-format msgid "" "\n" "- Daemon (%s) include:\n" msgstr "" "\n" "- Szolgáltatások (%s):\n" #: ../../standalone/drakbackup_.c:2573 msgid "\t-Hard drive.\n" msgstr "\t-Merevlemez\n" #: ../../standalone/drakbackup_.c:2574 msgid "\t-CDROM.\n" msgstr "\t-CD\n" #: ../../standalone/drakbackup_.c:2575 msgid "\t-Tape \n" msgstr "\t-Szalag \n" #: ../../standalone/drakbackup_.c:2576 msgid "\t-Network by FTP.\n" msgstr "\t-Hálózat FTP-vel\n" #: ../../standalone/drakbackup_.c:2577 msgid "\t-Network by SSH.\n" msgstr "\t-Hálózat SSH-val\n" #: ../../standalone/drakbackup_.c:2578 msgid "\t-Network by rsync.\n" msgstr "\t-Hálózat rsync használatával\n" #: ../../standalone/drakbackup_.c:2579 msgid "\t-Network by webdav.\n" msgstr "\t-Hálózat webdav használatával\n" #: ../../standalone/drakbackup_.c:2581 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Nincs beállítás. Használja a varázslót vagy a Speciális opciót.\n" #: ../../standalone/drakbackup_.c:2587 msgid "" "List of data to restore:\n" "\n" msgstr "" "A visszatöltendő adatok listája:\n" "\n" #: ../../standalone/drakbackup_.c:2754 msgid "" "List of data corrupted:\n" "\n" msgstr "" "A sérült adatok listája:\n" "\n" #: ../../standalone/drakbackup_.c:2756 msgid "Please uncheck or remove it on next time." msgstr "A következő alkalommal szüntesse meg a kijelölést vagy törölje." #: ../../standalone/drakbackup_.c:2766 msgid "Backup files are corrupted" msgstr "A mentésfájlok sérültek" #: ../../standalone/drakbackup_.c:2787 msgid " All of your selected data have been " msgstr " Az összes kijelölt adat " #: ../../standalone/drakbackup_.c:2788 #, c-format msgid " Successfuly Restored on %s " msgstr " vissza lett töltve ide: %s " #: ../../standalone/drakbackup_.c:2906 msgid " Restore Configuration " msgstr " Beállítás visszatöltése " #: ../../standalone/drakbackup_.c:2924 msgid "OK to restore the other files." msgstr "Az egyéb fájlok is visszatölthetők." #: ../../standalone/drakbackup_.c:2941 msgid "User list to restore (only the most recent date per user is important)" msgstr "A visszatöltendő felhasználók (csak a legutóbbi dátumok lényegesek)" #: ../../standalone/drakbackup_.c:3019 msgid "Backup the system files before:" msgstr "Az ez előtti rendszerfájlok mentése:" #: ../../standalone/drakbackup_.c:3021 msgid "please choose the date to restore" msgstr "adja meg a visszatöltési dátumot" #: ../../standalone/drakbackup_.c:3057 msgid "Use Hard Disk to backup" msgstr "Mentés merevlemezre" #: ../../standalone/drakbackup_.c:3060 msgid "Please enter the directory to save:" msgstr "Adja meg a könyvtárt, ahova menteni kell:" #: ../../standalone/drakbackup_.c:3103 msgid "FTP Connection" msgstr "FTP-kapcsolat" #: ../../standalone/drakbackup_.c:3110 msgid "Secure Connection" msgstr "Biztonságos kapcsolat" #: ../../standalone/drakbackup_.c:3134 msgid "Restore from Hard Disk." msgstr "Visszatöltés merevlemezről" #: ../../standalone/drakbackup_.c:3136 msgid "Please enter the directory where backups are stored" msgstr "Adja meg a könyvtárt, ahol a mentések vannak" #: ../../standalone/drakbackup_.c:3204 msgid "Select another media to restore from" msgstr "Válasszon más médiumot a visszatöltéshez" #: ../../standalone/drakbackup_.c:3206 msgid "Other Media" msgstr "Egyéb médium" #: ../../standalone/drakbackup_.c:3211 msgid "Restore system" msgstr "Rendszer visszatöltése" #: ../../standalone/drakbackup_.c:3212 msgid "Restore Users" msgstr "Felhasználók visszatöltése" #: ../../standalone/drakbackup_.c:3213 msgid "Restore Other" msgstr "Egyéb adatok visszatöltése" #: ../../standalone/drakbackup_.c:3215 msgid "select path to restore (instead of /)" msgstr "válassza ki a visszatöltendő útvonalat (a / helyett)" #: ../../standalone/drakbackup_.c:3219 msgid "Do new backup before restore (only for incremental backups.)" msgstr "Új mentés készítése visszatöltés előtt (csak inkrementális mentéshez)" #: ../../standalone/drakbackup_.c:3221 msgid "Remove user directories before restore." msgstr "Felhasználói könyvtárak törlése visszatöltés előtt" #: ../../standalone/drakbackup_.c:3334 msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" "A kijelölt katalógus-\n" "bejegyzés visszaállítása" #: ../../standalone/drakbackup_.c:3344 msgid "" "Restore Selected\n" "Files" msgstr "" "A kijelölt fájlok\n" "visszaállítása" #: ../../standalone/drakbackup_.c:3361 msgid "" "Change\n" "Restore Path" msgstr "" "A visszaállítási\n" "útvonal módosítása" #: ../../standalone/drakbackup_.c:3427 #, c-format msgid "Backup files not found at %s." msgstr "Mentésfájlok nem találhatók itt: %s." #: ../../standalone/drakbackup_.c:3440 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" "Helyezze be a(z) \"%s\" címkéjű CD-t\n" " a /mnt/cdrom csatolási pont alatti CD-meghajtóba" #: ../../standalone/drakbackup_.c:3440 msgid "Restore From CD" msgstr "Visszatöltés CD-ről" #: ../../standalone/drakbackup_.c:3442 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "Nem a megfelelő címkéjű CD. A CD címkéje: %s." #: ../../standalone/drakbackup_.c:3452 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "Helyezze be a(z) \"%s\" címkéjű szalagot\n" " a(z) %s szalagos meghajtóba" #: ../../standalone/drakbackup_.c:3452 msgid "Restore From Tape" msgstr "Visszatöltés szalagról" #: ../../standalone/drakbackup_.c:3454 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "Nem a megfelelő címkéjű szalag. A szalag címkéje: %s." #: ../../standalone/drakbackup_.c:3474 msgid "Restore Via Network" msgstr "Visszatöltés hálózaton keresztül" #: ../../standalone/drakbackup_.c:3474 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Visszatöltés a(z) %s hálózati protokollon keresztül" #: ../../standalone/drakbackup_.c:3475 msgid "Host Name" msgstr "Gépnév" #: ../../standalone/drakbackup_.c:3476 msgid "Host Path or Module" msgstr "Gép-útvonal vagy modul" #: ../../standalone/drakbackup_.c:3483 msgid "Password required" msgstr "Jelszó szükséges" #: ../../standalone/drakbackup_.c:3489 msgid "Username required" msgstr "Felhasználónév szükséges" #: ../../standalone/drakbackup_.c:3492 msgid "Hostname required" msgstr "Gépnév szükséges" #: ../../standalone/drakbackup_.c:3497 msgid "Path or Module required" msgstr "Útvonal vagy modul megadása szükséges" #: ../../standalone/drakbackup_.c:3510 msgid "Files Restored..." msgstr "Fájlok visszaállítva..." #: ../../standalone/drakbackup_.c:3513 msgid "Restore Failed..." msgstr "A visszaállítás sikertelen volt..." #: ../../standalone/drakbackup_.c:3751 msgid "Restore all backups" msgstr "Az összes mentés visszatöltése" #: ../../standalone/drakbackup_.c:3760 msgid "Custom Restore" msgstr "Egyéni visszatöltés" #: ../../standalone/drakbackup_.c:3804 msgid "CD in place - continue." msgstr "A CD a helyén van - folytatás." #: ../../standalone/drakbackup_.c:3810 msgid "Browse to new restore repository." msgstr "Átlépés egy másik visszaállítási tárhelyre." #: ../../standalone/drakbackup_.c:3813 msgid "Restore From Catalog" msgstr "Visszaállítás a katalógusból" #: ../../standalone/drakbackup_.c:3841 msgid "Restore Progress" msgstr "A visszaállítás folyamata" #: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916 #: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969 #: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056 #: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113 #: ../../standalone/drakbackup_.c:4139 msgid "Previous" msgstr "Előző" #: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973 #: ../../standalone/logdrake_.c:203 msgid "Save" msgstr "Mentés" #: ../../standalone/drakbackup_.c:3946 msgid "Build Backup" msgstr "Mentésfájlok elkészítése" #: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544 msgid "Restore" msgstr "Visszatöltés" #: ../../standalone/drakbackup_.c:4189 msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "Hiba a sendmail hívása közben.\n" " A jelentés nem lett elküldve.\n" " Ellenőrizze a sendmail beállítását." #: ../../standalone/drakbackup_.c:4195 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" "Hiba a fájl FTP-vel való átvitele közben.\n" " Ellenőrizze az FTP-vel kapcsolatos beállításokat." #: ../../standalone/drakbackup_.c:4209 msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" msgstr "" "A következő csomagokat szükséges telepíteni:\n" " @list_of_rpm_to_install" #: ../../standalone/drakbackup_.c:4232 msgid "Please select data to restore..." msgstr "Válassza ki a visszatöltendő adatokat..." #: ../../standalone/drakbackup_.c:4267 msgid "Please select media for backup..." msgstr "Válasszon mentési médiumot..." #: ../../standalone/drakbackup_.c:4275 msgid "Please select data to backup..." msgstr "Válassza ki a mentendő adatokat..." #: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304 msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Beállítási fájl nem található. \n" "Használja a varázslót vagy a Speciális opciót." #: ../../standalone/drakbackup_.c:4308 msgid "Under Devel ... please wait." msgstr "Fejlesztés alatt..." #: ../../standalone/drakbackup_.c:4382 msgid "Backup system files" msgstr "Rendszerfájlok mentése" #: ../../standalone/drakbackup_.c:4384 msgid "Backup user files" msgstr "Felhasználói fájlok mentése" #: ../../standalone/drakbackup_.c:4386 msgid "Backup other files" msgstr "Egyéb fájlok mentése" #: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421 msgid "Total Progress" msgstr "Előrehaladás" #: ../../standalone/drakbackup_.c:4412 msgid "files sending by FTP" msgstr "fájlok küldése FTP-n" #: ../../standalone/drakbackup_.c:4416 msgid "Sending files..." msgstr "Fájlok küldése..." #: ../../standalone/drakbackup_.c:4500 msgid "Backup Now from configuration file" msgstr "Mentés most a beállítások alapján" #: ../../standalone/drakbackup_.c:4505 msgid "View Backup Configuration." msgstr "Mentési beállítások megtekintése." #: ../../standalone/drakbackup_.c:4526 msgid "Wizard Configuration" msgstr "Beállítás a varázslóval" #: ../../standalone/drakbackup_.c:4531 msgid "Advanced Configuration" msgstr "Speciális beállítások" #: ../../standalone/drakbackup_.c:4536 msgid "Backup Now" msgstr "Mentés most" #: ../../standalone/drakbackup_.c:4576 msgid "Drakbackup" msgstr "DrakBackup" #: ../../standalone/drakbackup_.c:4624 msgid "" "options description:\n" "\n" " In this step Drakbackup allow you to change:\n" "\n" " - The compression mode:\n" " \n" " If you check bzip2 compression, you will compress\n" " your data better than gzip (about 2-10 %).\n" " This option is not checked by default because\n" " this compression mode needs more time (about 1000% more).\n" " \n" " - The update mode:\n" "\n" " This option will update your backup, but this\n" " option is not really useful because you need to\n" " decompress your backup before you can update it.\n" " \n" " - the .backupignore mode:\n" "\n" " Like with cvs, Drakbackup will ignore all references\n" " included in .backupignore files in each directories.\n" " ex: \n" " /*> cat .backupignore*/\n" " *.o\n" " *~\n" " ...\n" " \n" "\n" msgstr "" "opciók leírása:\n" "\n" " Ebben a lépésben a következőket lehet módosítani:\n" "\n" " - Tömörítési mód:\n" " \n" " Ha bzip2 tömörítést választ, az adatok jobban lesznek\n" " tömörítve, mint a gzip esetén (körülbelül 2-10 %-kal).\n" " Alapértelmezésben nincs bejelölve ez az opció, mivel ez a\n" " tömörítési mód több időt igényel (körülbelül 1000 %-kal többet).\n" " \n" " - Frissítési mód:\n" "\n" " Ez az opció frissíti a mentést, de nem igazán hasznos,\n" " mivel frissítés előtt ki kell tömöríteni a mentést.\n" " \n" " - .backupignore mód:\n" "\n" " Ahogyan a CVS esetén, a DrakBackup kihagy minden olyan\n" " fájlt, ami a megfelelő könyvtárban levő .backupignore\n" " fájlban hivatkozva van. Példa a .backupignore fájl\n" " lehetséges tartalmára: \n" " *.o\n" " *~\n" " \n" "\n" #: ../../standalone/drakbackup_.c:4654 msgid "" "\n" " Some errors during sendmail are caused by \n" " a bad configuration of postfix. To solve it you have to\n" " set myhostname or mydomain in /etc/postfix/main.cf\n" "\n" msgstr "" "\n" " Bizonyos, a sendmail futása közben fellépő hibáknak a\n" " postfix helytelen beállítása az oka. A kijavítás érdekében\n" " állítsa be a \"myhostname\"-et vagy a \"mydomain\"-t a\n" " /etc/postfix/main.cf fájlban.\n" "\n" #: ../../standalone/drakbackup_.c:4662 msgid "" "options description:\n" "\n" " - Backup system files:\n" " \n" "\tThis option allows you to backup your /etc directory,\n" "\twhich contains all configuration files. Please be\n" "\tcareful during the restore step to not overwrite:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Backup User files: \n" "\n" "\tThis option allows you select all users that you want \n" "\tto backup.\n" "\tTo preserve disk space, it is recommended that you \n" "\tdo not include web browser's cache.\n" "\n" " - Backup Other files: \n" "\n" "\tThis option allows you to add more data to save.\n" "\tWith the other backup it's not possible at the \n" "\tmoment to select incremental backup.\t\t\n" " \n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption for backup. This option allows you \n" "\tto backup all your data the first time, and \n" "\tonly the changed afterward.\n" "\tThen you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" msgstr "" "opciók leírása:\n" "\n" " - Rendszerfájlok mentése:\n" " \n" "\tLehetővé teszi a /etc könyvtár mentését. Ez a könyvtár\n" "\ta beállítási fájlokat tartalmazza. Visszatöltés közben\n" "\tlegyen óvatos, nehogy felülírja a következő fájlokat:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - Felhasználói fájlok mentése: \n" "\n" "\tLehetővé teszi annak kiválasztását, hogy mely \n" "\tfelhasználók adatait kívánja menteni.\n" "\tHogy ne legyen feleslegesen használva a lemezhely, \n" "\tjavasolt a böngésző gyorstárának fájljait kihagyni.\n" "\n" " - Egyéb fájlok mentése: \n" "\n" "\tLehetővé teszi további mentendő adatok kijelölését.\n" "\tEz a módszer egyelőre nem használható az inkrementális \n" "\tmentéssel együtt.\t\t\n" " \n" " - Inkrementális mentések:\n" "\n" "\tAz inkrementális mentés talán a legrugalmasabb \n" "\tmentési módszer. Ezen módszer használata esetén \n" "\taz első mentés (amely még teljes mentés) után \n" "\tmár csak a változások kerülnek mentésre.\n" "\tVisszatöltésnél lehetőség van arra, hogy egy\n" "\tadott dátumra vonatkozóan legyenek visszatöltve\n" "\taz adatok.\n" "\tHa ez az opció nincs bejelölve, akkor az összes korábbi\n" "\tmentés le lesz törölve minden mentési folyamat előtt. \n" "\n" "\n" #: ../../standalone/drakbackup_.c:4701 msgid "" "restore description:\n" " \n" "Only the most recent date will be used, because with incremental \n" "backups it is necessary to restore one by one each older backup.\n" "\n" "So if you don't want to restore a user please unselect all their\n" "check boxes.\n" "\n" "Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" "\toption to use. This option allows you to \n" "\tbackup all of your data the first time, and \n" "\tonly the changed data after.\n" "\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" "\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" "\n" msgstr "" "a visszatöltés leírása:\n" " \n" "Csak a legutóbbi dátum lesz felhasználva, mivel inkrementális \n" "mentés esetén az összes korábbi mentést vissza kell tölteni.\n" "\n" "Ha tehát nem akarja visszatölteni egy felhasználó adatait, akkor\n" "törölje az ahhoz tartozó összes opciót.\n" "\n" "Máskülönben csak egyet választhat ki közülük.\n" "\n" " - Inkrementális mentések:\n" "\n" "\tAz inkrementális mentés talán a legrugalmasabb \n" "\tmentési módszer. Ezen módszer használata esetén \n" "\taz első mentés (amely még teljes mentés) után \n" "\tmár csak a változások kerülnek mentésre.\n" "\tVisszatöltésnél lehetőség van arra, hogy egy\n" "\tadott dátumra vonatkozóan legyenek visszatöltve\n" "\taz adatok.\n" "\tHa ez az opció nincs bejelölve, akkor az összes korábbi\n" "\tmentés le lesz törölve minden mentési folyamat előtt. \n" "\n" "\n" "\n" #: ../../standalone/drakbackup_.c:4727 #, fuzzy msgid "" " Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien " msgstr "" " Copyright (C) 2001 MandrakeSoft - DUPONT Sebastien " #: ../../standalone/drakbackup_.c:4729 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" " frissítések: 2002, MandrakeSoft - Stew Benedict " #: ../../standalone/drakbackup_.c:4732 #, fuzzy msgid "" "Description:\n" "\n" " Drakbackup is used to backup your system.\n" " During the configuration you can select: \n" "\t- System files, \n" "\t- Users files, \n" "\t- Other files.\n" "\tor All your system ... and Other (like Windows Partitions)\n" "\n" " Drakbackup allows you to backup your system on:\n" "\t- Harddrive.\n" "\t- NFS.\n" "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" "\t- FTP.\n" "\t- Rsync.\n" "\t- Webdav.\n" "\t- Tape.\n" "\n" " Drakbackup allows you to restore your system to\n" " a user selected directory.\n" "\n" " Per default all backup will be stored on your\n" " /var/lib/drakbackup directory\n" "\n" " Configuration file:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "Restore Step:\n" " \n" " During the restore step, DrakBackup will remove \n" " your original directory and verify that all \n" " backup files are not corrupted. It is recommended \n" " you do a last backup before restoring.\n" "\n" "\n" msgstr "" "Leírás:\n" "\n" " A DrakBackup program a rendszer mentésére használható.\n" " Beállítható, mi legyen mentve:\n" "\t- rendszerfájlok\n" "\t- felhasználói fájlok\n" "\t- egyéb fájlok\n" "\tvagy a teljes rendszer és az egyéb adatok (például Windows partíciók)\n" "\n" " A DrakBackup a következő helyekre képes menteni:\n" "\t- merevlemez\n" "\t- NFS\n" "\t- CD (CD-RW), DVD (automatikus rendszerindítással,\n" "\t helyreállítással és automatikus telepítéssel)\n" "\t- FTP\n" "\t- rsync\n" "\t- Webdav\n" "\t- szalag\n" "\n" " A DrakBackup lehetővé teszi a rendszernek egy kiválasztott\n" " könyvtárba való visszatöltését.\n" "\n" " Alapértelmezés szerint az összes mentés a /var/lib/drakbackup\n" " könyvtárba kerül.\n" "\n" " A beállításokat tartalmazó fájl:\n" "\t/etc/drakconf/drakbackup/drakbakup.conf\n" "\n" "\n" "Mentés visszatöltése:\n" "\n" " Visszatöltés közben a DrakBackup eltávolítja az\n" " eredeti könyvtárt, és ellenőrzi, hogy nincsenek-e\n" " megsérülve a mentéseket tároló fájlok. Visszatöltés\n" " előtt javasolt még egy mentést készíteni.\n" "\n" "\n" #: ../../standalone/drakbackup_.c:4769 msgid "" "options description:\n" "\n" "Please be careful when you are using ftp backup, because only \n" "backups that are already built are sent to the server.\n" "So at the moment, you need to build the backup on your hard \n" "drive before sending it to the server.\n" "\n" msgstr "" "Az opciók leírása:\n" "\n" "Legyen óvatos, amikor FTP-s mentést használ - csak a már elkészült \n" "mentésfájlokat küldi a program a kiszolgálóra.\n" "Ez azt jelenti, hogy jelenleg el kell készíteni a mentést a \n" "merevlemezre, mielőtt a kiszolgálóra lenne küldve.\n" "\n" #: ../../standalone/drakbackup_.c:4778 msgid "" "\n" "Restore Backup Problems:\n" "\n" "During the restore step, Drakbackup will verify all your\n" "backup files before restoring them.\n" "Before the restore, Drakbackup will remove \n" "your original directory, and you will loose all your \n" "data. It is important to be careful and not modify the \n" "backup data files by hand.\n" msgstr "" "\n" "Mentés visszatöltésével kapcsolatos problémák:\n" "\n" "Visszatöltés közben a DrakBackup ellenőrzi az összes mentésfájlt,\n" "mielőtt visszatöltene azokból.\n" "Visszatöltés előtt a program eltávolítja az eredeti könyvtárt,\n" "így elvesznek az ott levő adatok.\n" "A mentésfájlokat kézzel ne módosítsa.\n" #: ../../standalone/drakboot_.c:50 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "A(z) %s telepítése nem sikerült a következő hiba miatt:" #: ../../standalone/drakbug_.c:45 msgid "Mandrake Bug Report Tool" msgstr "Mandrake hibabejelentő program" #: ../../standalone/drakbug_.c:50 msgid "First Time Wizard" msgstr "Mandrake Varázsló" #: ../../standalone/drakbug_.c:51 msgid "Synchronization tool" msgstr "Szinkronizáló program" #: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66 #: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135 #: ../../standalone/drakbug_.c:139 msgid "Standalone Tools" msgstr "Önálló eszközök" #: ../../standalone/drakbug_.c:53 msgid "HardDrake" msgstr "HardDrake" #: ../../standalone/drakbug_.c:54 msgid "Mandrake Online" msgstr "MandrakeOnline" #: ../../standalone/drakbug_.c:55 msgid "Menudrake" msgstr "MenuDrake" #: ../../standalone/drakbug_.c:56 msgid "Msec" msgstr "Msec" #: ../../standalone/drakbug_.c:57 msgid "Remote Control" msgstr "Távirányítás" #: ../../standalone/drakbug_.c:58 msgid "Software Manager" msgstr "Szoftvercsomag-kezelő" #: ../../standalone/drakbug_.c:59 msgid "Urpmi" msgstr "Urpmi" #: ../../standalone/drakbug_.c:60 msgid "Windows Migration tool" msgstr "Windows migrációs program" #: ../../standalone/drakbug_.c:61 msgid "Userdrake" msgstr "UserDrake" #: ../../standalone/drakbug_.c:62 msgid "Configuration Wizards" msgstr "Beállítási varázslók" #: ../../standalone/drakbug_.c:75 msgid "Application:" msgstr "Alkalmazás:" #: ../../standalone/drakbug_.c:76 msgid "Package: " msgstr "Csomag: " #: ../../standalone/drakbug_.c:77 msgid "Kernel:" msgstr "Kernel:" #: ../../standalone/drakbug_.c:78 msgid "Release: " msgstr "Kiadás: " #: ../../standalone/drakbug_.c:93 msgid "" "\n" "\n" "To submit a bug report, click on the button report.\n" "This will open a web browser window on https://drakbug.mandrakesoft.com\n" " where you'll find a form to fill in.The information displayed above will " "be \n" "transferred to that server\n" "\n" msgstr "" "\n" "\n" "Hibajelentés küldéséhez kattintson a \"Bejelentés\" gombra.\n" "Ekkor megnyílik egy webes böngészőablak a https://drakbug.mandrakesoft.com\n" "címmel, ahol egy kitöltendő űrlap lesz látható. A fenti információk el " "lesznek\n" "küldve azon kiszolgálónak.\n" "\n" #: ../../standalone/drakbug_.c:112 msgid "Report" msgstr "Bejelentés" #: ../../standalone/drakbug_.c:148 msgid "Not installed" msgstr "Nincs telepítve" #: ../../standalone/drakbug_.c:160 #, fuzzy msgid "Package not installed" msgstr "Nincs telepítve" #: ../../standalone/drakbug_.c:173 msgid "connecting to Bugzilla wizard ..." msgstr "csatlakozás a Bugzilla varázslóhoz..." #: ../../standalone/drakbug_.c:180 msgid "No browser available! Please install one" msgstr "Nincs elérhető böngésző. Telepítsen egyet." #: ../../standalone/drakconnect_.c:75 #, c-format msgid "Network configuration (%d adapters)" msgstr "Hálózatbeállítás (%d csatoló)" #: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591 msgid "Profile: " msgstr "Profil: " #: ../../standalone/drakconnect_.c:91 msgid "Del profile..." msgstr "Profil törlése..." #: ../../standalone/drakconnect_.c:97 msgid "Profile to delete:" msgstr "A törölni kívánt profil:" #: ../../standalone/drakconnect_.c:125 msgid "New profile..." msgstr "Új profil..." #: ../../standalone/drakconnect_.c:131 msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" "A létrehozandó profil neve (az új profil az aktuális pontos másolata lesz):" #: ../../standalone/drakconnect_.c:157 msgid "Hostname: " msgstr "Gépnév: " #: ../../standalone/drakconnect_.c:164 msgid "Internet access" msgstr "Internet-hozzáférés" #: ../../standalone/drakconnect_.c:177 msgid "Type:" msgstr "Típus:" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Gateway:" msgstr "Átjáró (gateway):" #: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372 msgid "Interface:" msgstr "Csatoló:" #: ../../standalone/drakconnect_.c:191 msgid "Status:" msgstr "Állapot:" #: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145 msgid "Wait please" msgstr "Kis türelmet" #: ../../standalone/drakconnect_.c:216 msgid "Configure Internet Access..." msgstr "Az internet-hozzáférés beállítása..." #: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445 msgid "LAN configuration" msgstr "A helyi hálózat beállítása" #: ../../standalone/drakconnect_.c:228 msgid "Driver" msgstr "Meghajtó" #: ../../standalone/drakconnect_.c:228 msgid "Interface" msgstr "Csatoló" #: ../../standalone/drakconnect_.c:228 msgid "Protocol" msgstr "Protokoll" #: ../../standalone/drakconnect_.c:228 msgid "State" msgstr "Állapot" #: ../../standalone/drakconnect_.c:240 msgid "Configure Local Area Network..." msgstr "A helyi hálózat beállítása..." #: ../../standalone/drakconnect_.c:252 msgid "Click here to launch the wizard ->" msgstr "A varázsló indításához kattintson ide ->" #: ../../standalone/drakconnect_.c:253 msgid "Wizard..." msgstr "Varázsló..." #: ../../standalone/drakconnect_.c:279 msgid "Apply" msgstr "Alkalmazás" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Connected" msgstr "Csatlakozva" #: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403 #: ../../standalone/net_monitor_.c:457 msgid "Not connected" msgstr "Nincs csatlakozva" #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Connect..." msgstr "Csatlakozás..." #: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404 msgid "Disconnect..." msgstr "A kapcsolat bontása..." #: ../../standalone/drakconnect_.c:400 msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Figyelmeztetés: Egy másik internetkapcsolat is létezik, esetlegesen a " "hálózatot használva." #: ../../standalone/drakconnect_.c:427 msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Egyetlen csatoló sincs beállítva.\n" "A beállítás elvégzéséhez kattintson a \"Beállítás\" gombra." #: ../../standalone/drakconnect_.c:449 msgid "LAN Configuration" msgstr "A helyi hálózat beállítása" # $vbox_local->pack_start(new Gtk::Label(_("Adapter %s: %s", $_+1 , "eth$_")),1,1,0); #: ../../standalone/drakconnect_.c:460 #, c-format msgid "Adapter %s: %s" msgstr "%s. csatoló: %s" # [_("Boot Protocol"), \$intf->{"eth$_"}{BOOTPROTO}, ["static", "dhcp", "bootp"]], # nem csak IP-címkiosztást végeznek #: ../../standalone/drakconnect_.c:466 msgid "Boot Protocol" msgstr "Beállítási protokoll" #: ../../standalone/drakconnect_.c:467 msgid "Started on boot" msgstr "Automatikus indítás" #: ../../standalone/drakconnect_.c:468 msgid "DHCP client" msgstr "DHCP-kliens" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "activate now" msgstr "aktiválás most" #: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496 msgid "deactivate now" msgstr "deaktiválás most" #: ../../standalone/drakconnect_.c:499 msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" "Ez a csatoló még nem lett beállítva.\n" "A beállítóvarázslót a főablakban indíthatja el." #: ../../standalone/drakconnect_.c:556 msgid "" "You don't have any internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" "Nincs beállítva egyetlen internetkapcsolat sem.\n" "Kapcsolat létrehozásához kattintson a \"Beállítás\" gombra." #: ../../standalone/drakconnect_.c:580 msgid "Internet connection configuration" msgstr "Internetkapcsolat beállítása" #: ../../standalone/drakconnect_.c:584 msgid "Internet Connection Configuration" msgstr "Internetkapcsolat beállítása" #: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94 msgid "Connection type: " msgstr "A csatlakozás típusa: " #: ../../standalone/drakconnect_.c:599 msgid "Parameters" msgstr "Paraméterek" #: ../../standalone/drakconnect_.c:618 msgid "Gateway" msgstr "Átjáró (gateway)" #: ../../standalone/drakconnect_.c:627 msgid "Ethernet Card" msgstr "Ethernet-kártya" #: ../../standalone/drakconnect_.c:628 msgid "DHCP Client" msgstr "DHCP-kliens" #: ../../standalone/drakfloppy_.c:39 msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*" msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-iso8859-2,*" #: ../../standalone/drakfloppy_.c:40 msgid "Module name" msgstr "Modulnév" #: ../../standalone/drakfloppy_.c:40 msgid "Size" msgstr "Méret" #: ../../standalone/drakfloppy_.c:45 msgid "drakfloppy" msgstr "drakfloppy" #: ../../standalone/drakfloppy_.c:63 msgid "boot disk creation" msgstr "rendszerindító lemez készítése" #: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84 msgid "default" msgstr "alapértelmezés" #: ../../standalone/drakfloppy_.c:87 #, c-format msgid "DrakFloppy Error: %s" msgstr "DrakFloppy hiba: %s" #: ../../standalone/drakfloppy_.c:98 msgid "kernel version" msgstr "a kernel verziója" #: ../../standalone/drakfloppy_.c:104 msgid "General" msgstr "Általános" #: ../../standalone/drakfloppy_.c:109 msgid "Expert Area" msgstr "Csak szakértőknek" #: ../../standalone/drakfloppy_.c:112 msgid "mkinitrd optional arguments" msgstr "Az mkinitrd opcionális argumentumai" #: ../../standalone/drakfloppy_.c:113 msgid "Add a module" msgstr "Modul hozzáadása" #: ../../standalone/drakfloppy_.c:133 msgid "force" msgstr "felülírás" #: ../../standalone/drakfloppy_.c:134 msgid "if needed" msgstr "ha szükséges" #: ../../standalone/drakfloppy_.c:135 msgid "omit scsi modules" msgstr "a SCSI modulok kihagyása" #: ../../standalone/drakfloppy_.c:136 msgid "omit raid modules" msgstr "a RAID modulok kihagyása" #: ../../standalone/drakfloppy_.c:172 msgid "Remove a module" msgstr "Modul eltávolítása" #: ../../standalone/drakfloppy_.c:194 msgid "Output" msgstr "Kimenet" #: ../../standalone/drakfloppy_.c:206 msgid "Build the disk" msgstr "A lemez elkészítése" #: ../../standalone/drakfloppy_.c:336 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Biztosítsa, hogy a(z) %s eszközben legyen adathordozó" #: ../../standalone/drakfloppy_.c:341 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "A(z) %s eszközben nincs adathordozó, vagy írásvédett.\n" "Helyezzen be egyet, illetve szüntesse meg az írásvédelmet." #: ../../standalone/drakfloppy_.c:344 #, c-format msgid "Unable to fork: %s" msgstr "Nem sikerült létrehozni új példányt: %s" #: ../../standalone/drakfloppy_.c:349 #, c-format msgid "" "Unable to close properly mkbootdisk: \n" " %s \n" " %s" msgstr "" "Az mkbootdisk program lezárása sikertelen: \n" " %s \n" " %s" #: ../../standalone/drakfont_.c:213 msgid "Search installed fonts" msgstr "Telepített betűtípusok keresése" #: ../../standalone/drakfont_.c:215 msgid "Unselect fonts installed" msgstr "Telepített betűtípusok kijelölésének törlése" #: ../../standalone/drakfont_.c:239 msgid "parse all fonts" msgstr "az összes betűtípus vizsgálata" #: ../../standalone/drakfont_.c:242 msgid "no fonts found" msgstr "betűtípus nem található" #: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305 #: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454 #: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493 #: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532 msgid "done" msgstr "kész" #: ../../standalone/drakfont_.c:257 msgid "could not find any font in your mounted partitions" msgstr "a csatlakoztatott partíciókon betűtípus nem található" #: ../../standalone/drakfont_.c:303 msgid "Reselect correct fonts" msgstr "Jó betűtípusok ismételt kiválasztása" #: ../../standalone/drakfont_.c:307 msgid "could not find any font.\n" msgstr "betűtípus nem található\n" #: ../../standalone/drakfont_.c:331 msgid "Search fonts in installed list" msgstr "Betűtípusok keresése a telepítettek közt" #: ../../standalone/drakfont_.c:359 msgid "Fonts copy" msgstr "Betűtípus-másolás" #: ../../standalone/drakfont_.c:363 msgid "True Type fonts installation" msgstr "TrueType betűtípusok telepítése" #: ../../standalone/drakfont_.c:371 msgid "please wait during ttmkfdir..." msgstr "kis türelmet: ttmkfdir..." #: ../../standalone/drakfont_.c:377 msgid "True Type install done" msgstr "TrueType-telepítés kész" #: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413 msgid "Fonts conversion" msgstr "Betűtípus-konvertálás" #: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417 #: ../../standalone/drakfont_.c:450 msgid "type1inst building" msgstr "type1inst készítése" #: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427 msgid "Ghostscript referencing" msgstr "Ghostscript-hivatkozás" #: ../../standalone/drakfont_.c:437 msgid "ttf fonts conversion" msgstr "ttf betűtípusok konvertálása" #: ../../standalone/drakfont_.c:444 msgid "pfm fonts conversion" msgstr "pfm betűtípusok konvertálása" #: ../../standalone/drakfont_.c:456 msgid "Suppress temporary Files" msgstr "Átmeneti fájlok elhagyása" #: ../../standalone/drakfont_.c:459 msgid "Restart XFS" msgstr "XFS újraindítása" #: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526 msgid "Suppress Fonts Files" msgstr "Betűtípus-fájlok elhagyása" #: ../../standalone/drakfont_.c:528 msgid "xfs restart" msgstr "XFS újraindítása" #: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902 msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts using the normal way. In rare cases, bogus fonts " "may hang up your X Server." msgstr "" "Mielőtt bármilyen betűtípus telepítésébe kezdene, bizonyosodjon meg arról, " "hogy van joga azok telepítéséhez illetve használatához.\n" "\n" "-A betűtípusokat a szokott módon telepítheti. Bizonyos hibás betűtípusok " "lefagyaszthatják az X-kiszolgálót." #: ../../standalone/drakfont_.c:621 msgid "Fonts Importation" msgstr "Betűtípusok importálása" #: ../../standalone/drakfont_.c:650 msgid "Get Windows Fonts" msgstr "Windowsos betűtípusok" #: ../../standalone/drakfont_.c:658 msgid "Uninstall Fonts" msgstr "Betűtípusok eltávolítása" #: ../../standalone/drakfont_.c:669 msgid "Advanced Options" msgstr "Speciális opciók" #: ../../standalone/drakfont_.c:677 msgid "Font List" msgstr "Betűtípus-lista" #: ../../standalone/drakfont_.c:737 #, fuzzy msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" "\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "\n" "\n" msgstr "" " Ez a program szabad szoftver; terjeszthető és/vagy módosítható\n" " a Free Software Foundation által publikált GNU General Public\n" " License 2. vagy annál újabb verziója alapján.\n" "\n" " A program annak reményében kerül terjesztésre, hogy hasznosnak\n" " bizonyul, de GARANCIA NÉLKÜL; még a PIACKÉPESSÉG illetve\n" " egy BIZONYOS CÉLRA VALÓ ALKALMASSÁG sincs garantálva. További\n" " részletek a GNU General Public License-ben.\n" "\n" " A programmal együtt Önnek kapnia kellett egy példányt a GNU General\n" " Public License-ből; ha nem így történt, írjon a következő címre:\n" " Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n" " MA 02111-1307, USA." #: ../../standalone/drakfont_.c:793 msgid "" "drakfont Future Overview\n" " - Fonts import:\n" " pfb ( Adobe Type 1 binary )\n" " pfa ( Adobe Type 1 ASCII )\n" " ttf ( True-Type )\n" " pcf.gz\n" " Speedo\n" " and Bitmap (PCF, BDF, and SNF)\n" " - Features\n" " - Install fonts from any directory\n" " - Get windows fonts on any vfat partitions\n" " - Get fonts on any partitions.\n" " - UN-installation of any fonts (even if not installed " "through drakfont)\n" " - Support\n" " - Xfs\n" " - ghostscript & printer\n" " - Staroffice & printer\n" " - abiword\n" "\t - netscape\n" " - Koffice, Gnumeric, ... studying\n" " - all fonts supported by printer\n" " - anti-aliases by RENDER in Xfree86 .... \n" "\t\t\t\tsupported by KDE.\n" "\t\t\t\twill be supported by gnome 1.2.\n" "Visual Interface:\n" " Window interface:\n" " - Fontselectiondialog widget\n" " - Command buttons under Fontselectiondialog (like the actual " "frontend).\n" " Commands buttons:\n" " - import from windows partition.\n" " import from all fat32 partitions and look for winnt/windows/" "font\n" " and import all (delete doublon) but don't import if already " "exist.\n" " - import from directory\n" " look for if it exist before for each font and not delete the " "original.\n" " (replace all, no, none)\n" " expert options:\n" " ask the directory, and look for if it exist before\n" " if it exist ask: (replace all, no, none)\n" " - uninstall with list per font type\n" " Expert additional switch\n" " - option support: ghostscript, Staroffice, etc...\n" " check-button. (by default all check)\n" " - Printer Application Fonts Support...\n" "\n" "\n" msgstr "" #: ../../standalone/drakfont_.c:862 msgid "Choose the applications that will support the fonts:" msgstr "Válassza ki, mely alkalmazások fogják használni a betűtípusokat:" #: ../../standalone/drakfont_.c:870 msgid "Ghostscript" msgstr "Ghostscript" #: ../../standalone/drakfont_.c:877 msgid "StarOffice" msgstr "StarOffice" #: ../../standalone/drakfont_.c:884 msgid "Abiword" msgstr "AbiWord" #: ../../standalone/drakfont_.c:891 msgid "Generic Printers" msgstr "Általános nyomtatók" #: ../../standalone/drakfont_.c:958 msgid "Select the font file or directory and click on 'Add'" msgstr "" "Válassza ki a betűtípus-fájlt vagy -könyvtárt, majd kattintson a \"Hozzáadás" "\" gombra" #: ../../standalone/drakfont_.c:1005 msgid "Install List" msgstr "Telepítési lista" #: ../../standalone/drakfont_.c:1048 msgid "click here if you are sure." msgstr "kattintson ide, ha biztos benne" #: ../../standalone/drakfont_.c:1055 msgid "here if no." msgstr "ide, ha nem" #: ../../standalone/drakfont_.c:1112 msgid "Unselected All" msgstr "Kijelölések megszüntetése" #: ../../standalone/drakfont_.c:1116 msgid "Selected All" msgstr "Mindent kijelöl" #: ../../standalone/drakfont_.c:1120 msgid "Remove List" msgstr "Lista eltávolítása" #: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175 msgid "Initials tests" msgstr "Tesztelés" #: ../../standalone/drakfont_.c:1145 msgid "Copy fonts on your system" msgstr "Betűtípusok másolása a rendszerbe" #: ../../standalone/drakfont_.c:1149 msgid "Install & convert Fonts" msgstr "Betűtípusok telepítése és konvertálása" #: ../../standalone/drakfont_.c:1153 msgid "Post Install" msgstr "Telepítés után" #: ../../standalone/drakfont_.c:1178 msgid "Remove fonts on your system" msgstr "A rendszerben található betűtípusok eltávolítása" #: ../../standalone/drakfont_.c:1182 msgid "Post Uninstall" msgstr "Eltávolítás után" #: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182 msgid "Internet Connection Sharing" msgstr "Internetkapcsolat megosztása" #: ../../standalone/drakgw_.c:114 msgid "Sorry, we support only 2.4 kernels." msgstr "Csak a 2.4-es kerneleket támogatjuk." #: ../../standalone/drakgw_.c:125 msgid "Internet Connection Sharing currently enabled" msgstr "Az internetkapcsolat megosztása engedélyezve van" #: ../../standalone/drakgw_.c:126 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Az internetkapcsolat megosztása már megtörtént.\n" "A megosztott kapcsolat használható.\n" "\n" "Mit szeretne tenni?" #: ../../standalone/drakgw_.c:130 msgid "disable" msgstr "Letiltás" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "dismiss" msgstr "Mégsem" #: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154 msgid "reconfigure" msgstr "Beállítás újból" #: ../../standalone/drakgw_.c:133 msgid "Disabling servers..." msgstr "A kiszolgálók letiltása..." #: ../../standalone/drakgw_.c:142 msgid "Internet connection sharing is now disabled." msgstr "Az internetkapcsolat-megosztás letiltása megtörtént." #: ../../standalone/drakgw_.c:149 msgid "Internet Connection Sharing currently disabled" msgstr "Az internetkapcsolat megosztása nincs engedélyezve" #: ../../standalone/drakgw_.c:150 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Az internetkapcsolat megosztása korábban már megtörtént.\n" "A megosztott kapcsolat használata nincs engedélyezve.\n" "\n" "Mit szeretne tenni?" #: ../../standalone/drakgw_.c:154 msgid "enable" msgstr "Engedélyezés" #: ../../standalone/drakgw_.c:161 msgid "Enabling servers..." msgstr "A kiszolgálók engedélyezése..." #: ../../standalone/drakgw_.c:166 msgid "Internet connection sharing is now enabled." msgstr "Az internetkapcsolat megosztása most már engedélyezett." #: ../../standalone/drakgw_.c:183 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Az internetkapcsolat megosztásának beállítása következik.\n" "Ennek segítségével a helyi hálózat más gépei is elérhetik az internetet\n" "ezen a kapcsolaton keresztül.\n" "\n" "Mielőtt továbblépne, állítsa be a hálózat- illetve internetelérést\n" "a DrakConnect programmal (ha ez még nem történt meg).\n" "\n" "Megjegyzés: a helyi hálózat (LAN) használatához legalább egy hálózati\n" "csatolókártya szükséges." # az interface (hálókártya) milyen modult használ #: ../../standalone/drakgw_.c:211 #, c-format msgid "Interface %s (using module %s)" msgstr "\"%s\" csatoló (a felhasznált modul: %s)" #: ../../standalone/drakgw_.c:212 #, c-format msgid "Interface %s" msgstr "%s csatoló" #: ../../standalone/drakgw_.c:220 msgid "No network adapter on your system!" msgstr "Nem található hálózati csatolókártya a számítógépben." #: ../../standalone/drakgw_.c:221 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Nem található Ethernet hálózati adapter a rendszerben. Futtassa a " "hardverkonfigurációs eszközt." #: ../../standalone/drakgw_.c:227 msgid "Network interface" msgstr "Hálózati csatolófelület" #: ../../standalone/drakgw_.c:228 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Egyetlen beállított hálózati csatolókártya található a gépben:\n" "\n" "%s\n" "\n" "A helyi hálózat paraméterei ehhez a csatolóhoz lesznek beállítva." #: ../../standalone/drakgw_.c:235 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "Válassza ki, hogy milyen kártyával csatlakozik a helyi hálózathoz." #: ../../standalone/drakgw_.c:261 msgid "Network interface already configured" msgstr "Hálózati csatoló már be lett állítva" #: ../../standalone/drakgw_.c:262 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Figyelmeztetés: A hálózati kártya (%s) már be van állítva.\n" "\n" "Szeretne automatikus újrakonfigurálást?\n" "\n" "Elvégezheti Ön is kézzel, de csak ha biztos abban, hogy mit tesz." #: ../../standalone/drakgw_.c:267 msgid "Automatic reconfiguration" msgstr "Automatikus újrakonfigurálás" #: ../../standalone/drakgw_.c:267 msgid "No (experts only)" msgstr "" #: ../../standalone/drakgw_.c:268 msgid "Show current interface configuration" msgstr "Jelenlegi csatolóbeállítás megjelenítése" #: ../../standalone/drakgw_.c:269 #, fuzzy msgid "Current interface configuration" msgstr "Jelenlegi csatolóbeállítás megjelenítése" # attribution: # The attribution of IP addresses, talking about the network: a # server gives names to workstations so they can talk. # How the IP address is attributed: static (eg: manual config), dhcp, # bootp, ... #: ../../standalone/drakgw_.c:270 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "\"%s\" jelenlegi beállítása:\n" "\n" "Hálózat: %s\n" "IP-cím: %s\n" "IP-címkiosztás: %s\n" "Meghajtó: %s" #: ../../standalone/drakgw_.c:283 #, fuzzy msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Else, I can reconfigure your interface and (re)configure a DHCP server for " "you.\n" "\n" msgstr "" "Megtartható a jelenlegi beállítás; ekkor feltételezve lesz, hogy már " "megtörtént egy DHCP-kiszolgáló beállítása. Ebben az esetben ellenőrizze, " "hogy helyesen lettek-e meghatározva a helyi hálózat adatai. Nem történik " "újrakonfigurálás, és a DHCP-kiszolgáló beállításai sem kerülnek " "módosításra.\n" "\n" "Az alapértelmezett DNS a tűzfalhoz beállított gyorstárazó névkiszolgáló " "(caching nameserver). Ez helyettesíthető például a szolgáltató DNS-ének IP-" "címével.\n" "\n" "Újra is konfigurálható a csatoló illetve beállítható egy DHCP-kiszolgáló.\n" "\n" #: ../../standalone/drakgw_.c:290 msgid "Local Network adress" msgstr "Helyi hálózati cím" #: ../../standalone/drakgw_.c:294 msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" "A DHCP-kiszolgáló beállítása.\n" "\n" "Itt különböző opciók választhatók ki a DHCP-kiszolgáló beállításához.\n" "Ha egy opció jelentését nem ismeri, akkor ne módosítsa azt.\n" "\n" #: ../../standalone/drakgw_.c:300 msgid "(This) DHCP Server IP" msgstr "A DHCP-kiszolgáló IP-címe" #: ../../standalone/drakgw_.c:301 msgid "The DNS Server IP" msgstr "A DNS-kiszolgáló IP-címe" #: ../../standalone/drakgw_.c:302 msgid "The internal domain name" msgstr "A belső tartománynév" # IP Range Lower Limit: The lowest IP address that should be served by a DHCP server. #: ../../standalone/drakgw_.c:303 msgid "The DHCP start range" msgstr "A DHCP-címtartomány kezdete" #: ../../standalone/drakgw_.c:304 msgid "The DHCP end range" msgstr "A DHCP-címtartomány vége" # A lease is the length of time that a DHCP server specifies that a client computer # can use an assigned IP address. #: ../../standalone/drakgw_.c:305 msgid "The default lease (in seconds)" msgstr "Az alapértelmezett élettartam (másodpercben)" #: ../../standalone/drakgw_.c:306 msgid "The maximum lease (in seconds)" msgstr "A maximális élettartam (másodpercben)" #: ../../standalone/drakgw_.c:307 msgid "Re-configure interface and DHCP server" msgstr "Csatoló és DHCP-kiszolgáló újrakonfigurálása" #: ../../standalone/drakgw_.c:314 msgid "The Local Network did not finish with `.0', bailing out." msgstr "A helyi hálózati cím nem \".0\"-ra végződik, kilépek." #: ../../standalone/drakgw_.c:325 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Hálózati címhibát észleltem az aktuális konfigurációban: %s!\n" #: ../../standalone/drakgw_.c:335 msgid "Configuring..." msgstr "Beállítás..." #: ../../standalone/drakgw_.c:336 msgid "Configuring scripts, installing software, starting servers..." msgstr "Beállítószkriptek, szoftvertelepítés, szerverek indítása..." #: ../../standalone/drakgw_.c:372 #, c-format msgid "Problems installing package %s" msgstr "A(z) %s csomag telepítésénél hiba történt" #: ../../standalone/drakgw_.c:505 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "A beállítás sikeresen befejeződött.\n" "Az internetkapcsolat most már bármelyik, a helyi hálózaton található géppel " "megosztható az automatikus hálózati címkiosztás (DHCP) segítségével." #: ../../standalone/drakgw_.c:523 msgid "The setup has already been done, but it's currently disabled." msgstr "A megosztás már megtörtént, de a kapcsolat használata le van tiltva." #: ../../standalone/drakgw_.c:524 msgid "The setup has already been done, and it's currently enabled." msgstr "A megosztás már megtörtént, a kapcsolat használható." #: ../../standalone/drakgw_.c:525 msgid "No Internet Connection Sharing has ever been configured." msgstr "Az internetkapcsolat megosztása még nem történt meg." #: ../../standalone/drakgw_.c:531 msgid "Internet connection sharing configuration" msgstr "Az internetkapcsolat megosztásának beállítása" #: ../../standalone/drakgw_.c:539 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" "\n" "%s\n" "\n" "Click on Configure to launch the setup wizard." msgstr "" "Üdvözöljük az internetkapcsolat-megosztás beállítóprogramjában!\n" "\n" "%s\n" "\n" "Kattintson a Beállítás gombra a beállításvarázsló elindításához." #: ../../standalone/drakperm_.c:36 msgid "group" msgstr "csoport" #: ../../standalone/drakperm_.c:36 msgid "path" msgstr "útvonal" #: ../../standalone/drakperm_.c:36 msgid "permissions" msgstr "engedélyek" #: ../../standalone/drakperm_.c:36 msgid "user" msgstr "felhasználó" #: ../../standalone/drakperm_.c:43 msgid "Up" msgstr "Fel" #: ../../standalone/drakperm_.c:44 msgid "delete" msgstr "törlés" #: ../../standalone/drakperm_.c:45 msgid "edit" msgstr "módosítás" #: ../../standalone/drakperm_.c:46 msgid "Down" msgstr "Le" #: ../../standalone/drakperm_.c:47 msgid "add a rule" msgstr "szabály felvétele" #: ../../standalone/drakperm_.c:48 msgid "select perm file to see/edit" msgstr "válassza ki a megjelenítendő/módosítandó engedélyfájlt" #: ../../standalone/drakperm_.c:51 msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "A Drakperm az \"msec\" által kezelt engedélyeknek, tulajdonosoknak és " "csoportoknak a karbantartására használható.\n" "A felhasználó módosíthatja a saját szabályait, felüldefiniálva ezzel az " "alapértelmezett szabályokat." #: ../../standalone/drakperm_.c:56 msgid "Add a new rule at the end" msgstr "Új szabály felvétele a lista végére" #: ../../standalone/drakperm_.c:57 msgid "Edit curent rule" msgstr "Aktuális szabály módosítása" #: ../../standalone/drakperm_.c:58 msgid "Up selected rule one level" msgstr "A kijelölt szabályt egy szinttel feljebb" #: ../../standalone/drakperm_.c:59 msgid "Down selected rule one level" msgstr "A kijelölt szabályt egy szinttel lejjebb" #: ../../standalone/drakperm_.c:60 msgid "Delete selected rule" msgstr "A kijelölt szabály törlése" #: ../../standalone/drakperm_.c:224 msgid "browse" msgstr "böngészés" #: ../../standalone/drakperm_.c:231 msgid "Current user" msgstr "Aktuális felhasználó" #: ../../standalone/drakperm_.c:236 msgid "Permissions" msgstr "Engedélyek" #: ../../standalone/drakperm_.c:237 msgid "Path" msgstr "Útvonal" #: ../../standalone/drakperm_.c:238 msgid "Property" msgstr "Tulajdonság" #: ../../standalone/drakperm_.c:240 msgid "sticky-bit" msgstr "ragadós" #: ../../standalone/drakperm_.c:241 msgid "Set-UID" msgstr "más UID" #: ../../standalone/drakperm_.c:242 msgid "Set-GID" msgstr "más GID" #: ../../standalone/drakperm_.c:296 msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" "Könyvtárra használva:\n" " csak a könyvtár vagy a benne levő fájl tulajdonosa törölheti" #: ../../standalone/drakperm_.c:297 msgid "Use owner id for execution" msgstr "A tulajdonos azonosítójának használata a végrehajtáshoz" #: ../../standalone/drakperm_.c:298 msgid "Use group id for execution" msgstr "Csoportazonosító használata a végrehajtáshoz" #: ../../standalone/drakperm_.c:299 msgid "when checked, owner and group won't be changed" msgstr "bejelölés esetén a tulajdonos és a csoport nem lesz módosítva" #: ../../standalone/drakperm_.c:304 msgid "Path selection" msgstr "Útvonal választása" #: ../../standalone/drakperm_.c:350 msgid "user :" msgstr "felhasználó:" #: ../../standalone/drakperm_.c:352 msgid "group :" msgstr "csoport:" #: ../../standalone/draksound_.c:46 msgid "No Sound Card detected!" msgstr "Hangkártya nem található." #: ../../standalone/draksound_.c:47 msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Hangkártya nem található a gépben. Ellenőrizze, hogy valóban van-e a gépben " "Linux által támogatott hangkártya, és hogy megfelelően van-e beszerelve a " "gépbe.\n" "\n" "\n" "A Mandrake-féle hardver-adatbázis a következő helyen található:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/draksound_.c:54 msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Megjegyzés: ha ISA PnP hangkártyája van, akkor az sndconfig programot kell " "használnia. Ehhez adja ki az \"sndconfig\" parancsot egy parancssorban." #: ../../standalone/draksplash_.c:21 msgid "" "package 'ImageMagick' is required for correct working.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "A helyes működéshez szükség van az ImageMagick csomagra.\n" "Az ImageMagick telepítéséhez kattintson az \"OK\" gombra;\n" "kilépéshez a \"Mégsem\" gombra." #: ../../standalone/draksplash_.c:67 msgid "first step creation" msgstr "első lépés - létrehozás" #: ../../standalone/draksplash_.c:70 msgid "final resolution" msgstr "végső felbontás" #: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163 msgid "choose image file" msgstr "válasszon egy képfájlt" #: ../../standalone/draksplash_.c:72 msgid "Theme name" msgstr "Témamegnevezés" #: ../../standalone/draksplash_.c:77 msgid "Browse" msgstr "Böngészés" #: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153 msgid "Configure bootsplash picture" msgstr "Az indítási kép beállítása" #: ../../standalone/draksplash_.c:90 msgid "" "x coordinate of text box\n" "in number of character" msgstr "" "a szövegkeret x-koordinátája\n" "karakterszámban megadva" #: ../../standalone/draksplash_.c:91 msgid "" "y coordinate of text box\n" "in number of character" msgstr "" "a szövegkeret y-koordinátája\n" "karakterszámban megadva" #: ../../standalone/draksplash_.c:92 msgid "text width" msgstr "szövegszélesség" #: ../../standalone/draksplash_.c:93 msgid "text box height" msgstr "a szövegkeret magassága" #: ../../standalone/draksplash_.c:94 msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "a folyamatjelző bal felső\n" "sarkának x-koordinátája" #: ../../standalone/draksplash_.c:95 msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "a folyamatjelző bal felső\n" "sarkának y-koordinátája" #: ../../standalone/draksplash_.c:96 msgid "the width of the progress bar" msgstr "a folyamatjelző szélessége" #: ../../standalone/draksplash_.c:97 msgid "the heigth of the progress bar" msgstr "a folyamatjelző magassága" #: ../../standalone/draksplash_.c:98 msgid "the color of the progress bar" msgstr "a folyamatjelző színe" #: ../../standalone/draksplash_.c:113 msgid "Preview" msgstr "Előnézet" #: ../../standalone/draksplash_.c:115 msgid "Save theme" msgstr "Téma mentése" #: ../../standalone/draksplash_.c:116 msgid "Choose color" msgstr "Válasszon egy színt" #: ../../standalone/draksplash_.c:119 msgid "Display logo on Console" msgstr "Logó megjelenítése a konzolon" #: ../../standalone/draksplash_.c:120 msgid "Make kernel message quiet by default" msgstr "Alapértelmezésben ne legyenek kernelüzenetek" #: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321 #, c-format msgid "This theme haven't yet any bootsplash in %s !" msgstr "Ennek a témának nincs %s indítási képe." #: ../../standalone/draksplash_.c:205 msgid "saving Bootsplash theme..." msgstr "indításikép-téma mentése..." #: ../../standalone/draksplash_.c:428 msgid "ProgressBar color selection" msgstr "A folyamatjelző színének kiválasztása" #: ../../standalone/draksplash_.c:449 msgid "You must choose an image file first!" msgstr "Először ki kell választania egy képfájlt." #: ../../standalone/draksplash_.c:458 msgid "Generating preview ..." msgstr "Előnézet elkészítése..." #. -PO First %s is theme name, second %s (in parenthesis) is resolution #: ../../standalone/draksplash_.c:506 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s indítási képének előnézete (%s)" #: ../../standalone/drakxtv_.c:46 msgid "" "XawTV isn't installed!\n" "\n" "\n" "If you do have a TV card but DrakX has neither detected it (no bttv nor " "saa7134\n" "module in \"/etc/modules\") nor installed xawtv, please send the\n" "results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" "with subject \"undetected TV card\".\n" "\n" "\n" "You can install it by typing \"urpmi xawtv\" as root, in a console." msgstr "" "Az XawTV program nincsen telepítve.\n" "\n" "\n" "Ha Önnek van tévékártyája, de a DrakX nem találta meg azt (azaz sem a\n" "bttv modul, sem pedig az saa7134 modul nem szerepel a \"/etc/modules\"\n" "fájlban) és nem telepítette az xawtv programot, abban az esetben kérjük,\n" "küldje el az \"lspcidrake -v -f\" parancs eredményét (kimenetét) a\n" "következő címre: \"install\\@mandrakesoft.com\" a következő tárggyal:\n" "\"undetected TV card\".\n" "\n" "\n" "A program telepítése elvégezhető rendszergazdaként \"urpmi xawtv\"\n" "parancsot kiadva a konzolon." #: ../../standalone/drakxtv_.c:63 msgid "Canada (cable)" msgstr "Kanada (kábel)" #: ../../standalone/drakxtv_.c:63 msgid "USA (broadcast)" msgstr "USA (sugárzás)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable)" msgstr "USA (kábel)" #: ../../standalone/drakxtv_.c:63 msgid "USA (cable-hrc)" msgstr "USA (kábel-hrc)" #: ../../standalone/drakxtv_.c:64 msgid "China (broadcast)" msgstr "Kína (sugárzás)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (broadcast)" msgstr "Japán (sugárzás)" #: ../../standalone/drakxtv_.c:64 msgid "Japan (cable)" msgstr "Japán (kábel)" #: ../../standalone/drakxtv_.c:65 msgid "East Europe" msgstr "Kelet-Európa" #: ../../standalone/drakxtv_.c:65 msgid "France [SECAM]" msgstr "Franciaország [SECAM]" #: ../../standalone/drakxtv_.c:65 msgid "Ireland" msgstr "Írország" #: ../../standalone/drakxtv_.c:65 msgid "West Europe" msgstr "Nyugat-Európa" #: ../../standalone/drakxtv_.c:66 msgid "Australia" msgstr "Ausztrália" #: ../../standalone/drakxtv_.c:66 msgid "Newzealand" msgstr "Új-Zéland" #: ../../standalone/drakxtv_.c:67 msgid "South Africa" msgstr "Dél-Afrika" #: ../../standalone/drakxtv_.c:68 msgid "Argentina" msgstr "Argentína" #: ../../standalone/drakxtv_.c:69 msgid "Australian Optus cable TV" msgstr "Ausztrál Optus kábeltelevízió" #: ../../standalone/drakxtv_.c:102 msgid "" "Please,\n" "type in your tv norm and country" msgstr "" "Adja meg\n" "a tévénormát és az országot" #: ../../standalone/drakxtv_.c:104 msgid "TV norm:" msgstr "Tévénorma:" #: ../../standalone/drakxtv_.c:105 msgid "Area:" msgstr "Terület:" #: ../../standalone/drakxtv_.c:109 msgid "Scanning for TV channels in progress ..." msgstr "Tévécsatornák keresése..." #: ../../standalone/drakxtv_.c:116 msgid "Scanning for TV channels" msgstr "Tévécsatornák keresése" #: ../../standalone/drakxtv_.c:120 msgid "There was an error while scanning for TV channels" msgstr "Hiba történt a tévécsatornák keresésekor" #: ../../standalone/drakxtv_.c:121 msgid "XawTV isn't installed!" msgstr "Az XawTV program nincsen telepítve." #: ../../standalone/drakxtv_.c:124 msgid "Have a nice day!" msgstr "Sok sikert!" #: ../../standalone/drakxtv_.c:125 msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Az XawTV program most már futtatható (az X grafikus felületen).\n" #: ../../standalone/drakxtv_.c:147 msgid "No TV Card detected!" msgstr "Tévékártya nem található." #: ../../standalone/drakxtv_.c:148 msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Tévékártya nem található a gépben. Ellenőrizze, hogy valóban van-e a gépben " "Linux által támogatott tévékártya, és hogy megfelelően van-e beszerelve a " "gépbe.\n" "\n" "\n" "A Mandrake-féle hardver-adatbázis a következő helyen található:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: ../../standalone/harddrake2_.c:17 msgid "Alternative drivers" msgstr "Alternatív meghajtók" #: ../../standalone/harddrake2_.c:18 msgid "the list of alternative drivers for this sound card" msgstr "a hangkártyához használható alternatív meghajtók" #: ../../standalone/harddrake2_.c:20 msgid "Bus" msgstr "Busz" #: ../../standalone/harddrake2_.c:21 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "ez a fizikai busz, amelyre az eszköz csatlakoztatva van (PCI, USB, ...)" #: ../../standalone/harddrake2_.c:22 msgid "Channel" msgstr "Csatorna" #: ../../standalone/harddrake2_.c:22 msgid "EIDE/SCSI channel" msgstr "EIDE-/SCSI-csatorna" #: ../../standalone/harddrake2_.c:23 msgid "Bogomips" msgstr "" #: ../../standalone/harddrake2_.c:23 msgid "" "The GNU/Linux kernel needs to do run a calculation loop at boot time\n" "\t to initialize a timer counter. Its result is stored as bogomips as a way " "to \"benchmark\" the cpu." msgstr "" #: ../../standalone/harddrake2_.c:26 msgid "Bus identification" msgstr "Busz-azonosítás" #: ../../standalone/harddrake2_.c:27 msgid "" "- PCI and USB devices: this list the vendor, device, subvendor and subdevice " "PCI/USB ids" msgstr "" "- PCI- és USB-eszközök: gyártó, eszköz, algyártó, aleszköz PCI-/USB-" "azonosítók" #: ../../standalone/harddrake2_.c:29 msgid "Location on the bus" msgstr "A buszon elfoglalt hely" #: ../../standalone/harddrake2_.c:30 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- PCI-eszközök: PCI-kártyahely, eszköz és funkció\n" "- EIDE-eszközök: \"slave\" vagy \"master\" (második illetve első meghajtó)\n" "- SCSI-eszközök: SCSI-busz és SCSI eszközazonosítók" #: ../../standalone/harddrake2_.c:33 #, fuzzy msgid "Cache size" msgstr "szeletméret" #: ../../standalone/harddrake2_.c:33 msgid "Size of the (second level) cpu cache" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Coma bug:" msgstr "" #: ../../standalone/harddrake2_.c:34 msgid "Does this cpu has Cyrix 6x86 Coma bug ?" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Cpuid family" msgstr "" #: ../../standalone/harddrake2_.c:35 msgid "Family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../standalone/harddrake2_.c:36 #, fuzzy msgid "Cpuid level" msgstr "Biztonsági szint" #: ../../standalone/harddrake2_.c:36 msgid "Information level that can be obtained through the cpuid instruction" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "Frequency (MHz)" msgstr "" #: ../../standalone/harddrake2_.c:37 msgid "" "The cpu frequency in Mhz (Mega herz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../standalone/harddrake2_.c:38 #, fuzzy msgid "This field describes the device" msgstr "az eszköz leírása" #: ../../standalone/harddrake2_.c:39 msgid "Old device file" msgstr "Régi eszközfájl" #: ../../standalone/harddrake2_.c:40 msgid "old static device name used in dev package" msgstr "a dev csomagban használt régi statikus eszköznév" #: ../../standalone/harddrake2_.c:41 msgid "New devfs device" msgstr "Új devfs-eszköz" #: ../../standalone/harddrake2_.c:42 msgid "new dinamic device name generated by incore kernel devfs" msgstr "a kernelbeli devfs által előállított új dinamikus eszköznév" #: ../../standalone/harddrake2_.c:43 msgid "Module" msgstr "Modul" #: ../../standalone/harddrake2_.c:43 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "az eszközt kezelő linuxos kernelmodul" #: ../../standalone/harddrake2_.c:44 msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/harddrake2_.c:44 msgid "Flags" msgstr "" #: ../../standalone/harddrake2_.c:45 msgid "Fdiv bug" msgstr "" #: ../../standalone/harddrake2_.c:46 msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the attended precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "Is FPU present" msgstr "" #: ../../standalone/harddrake2_.c:49 msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "Does FPU have an irq vector" msgstr "" #: ../../standalone/harddrake2_.c:50 msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "Early pentium were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../standalone/harddrake2_.c:51 msgid "F00f bug" msgstr "" #: ../../standalone/harddrake2_.c:52 msgid "Halt bug" msgstr "" #: ../../standalone/harddrake2_.c:53 msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../standalone/harddrake2_.c:55 #, fuzzy msgid "Floppy format" msgstr "Formázás" #: ../../standalone/harddrake2_.c:55 msgid "Format of floppies the drive accept" msgstr "" #: ../../standalone/harddrake2_.c:56 #, fuzzy msgid "Level" msgstr "szint" #: ../../standalone/harddrake2_.c:56 msgid "Sub generation of the cpu" msgstr "" #: ../../standalone/harddrake2_.c:57 msgid "Media class" msgstr "Médiaosztály" #: ../../standalone/harddrake2_.c:57 msgid "class of hardware device" msgstr "a hardvereszköz osztálya" #: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59 msgid "Model" msgstr "Modell" #: ../../standalone/harddrake2_.c:58 msgid "hard disk model" msgstr "merevlemez-modell" #: ../../standalone/harddrake2_.c:59 msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Model name" msgstr "Modulnév" #: ../../standalone/harddrake2_.c:60 #, fuzzy msgid "Official vendor name of the cpu" msgstr "az eszköz gyártójának neve" #: ../../standalone/harddrake2_.c:61 msgid "Number of buttons" msgstr "Gombok száma" #: ../../standalone/harddrake2_.c:62 #, fuzzy msgid "Name" msgstr "Név: " #: ../../standalone/harddrake2_.c:63 #, fuzzy msgid "network printer port" msgstr ", hálózati nyomtató: \"%s\", port: %s" #: ../../standalone/harddrake2_.c:64 msgid "Processor ID" msgstr "" #: ../../standalone/harddrake2_.c:64 #, fuzzy msgid "the number of the processor" msgstr "a folyamatjelző színe" #: ../../standalone/harddrake2_.c:65 #, fuzzy msgid "Model stepping" msgstr "terhelésbeállítás" #: ../../standalone/harddrake2_.c:65 msgid "Stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/harddrake2_.c:66 #, fuzzy msgid "The type of bus on which the mouse is connected" msgstr "Válassza ki, hogy melyik soros porthoz csatlakozik az egere." #: ../../standalone/harddrake2_.c:67 msgid "the vendor name of the device" msgstr "az eszköz gyártójának neve" #: ../../standalone/harddrake2_.c:68 #, fuzzy msgid "the vendor name of the processor" msgstr "az eszköz gyártójának neve" #: ../../standalone/harddrake2_.c:82 msgid "/_Quit" msgstr "/_Kilépés" #: ../../standalone/harddrake2_.c:83 #, fuzzy msgid "/Autodetect _printers" msgstr "Automatikusan felderítve" #: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85 #: ../../standalone/logdrake_.c:81 msgid "/_Options" msgstr "/_Beállítások" #: ../../standalone/harddrake2_.c:85 #, fuzzy msgid "/Autodetect _modems" msgstr "Automatikusan felderítve" #: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89 #: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102 #: ../../standalone/logdrake_.c:83 msgid "/_Help" msgstr "/_Segítség" #: ../../standalone/harddrake2_.c:89 msgid "/_Help..." msgstr "/_Segítség..." #: ../../standalone/harddrake2_.c:92 msgid "Harddrake help" msgstr "HardDrake segítség" #: ../../standalone/harddrake2_.c:93 msgid "" "Description of the fields:\n" "\n" msgstr "" "A mezők leírása:\n" "\n" #: ../../standalone/harddrake2_.c:96 msgid "" "Once you've selected a device, you'll be able to see explanations on fields " "displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/harddrake2_.c:96 #, fuzzy msgid "Select a device !" msgstr "Válasszon egy lapolvasót" #: ../../standalone/harddrake2_.c:100 msgid "/_Report Bug" msgstr "/_Hibabejelentés" #: ../../standalone/harddrake2_.c:102 msgid "/_About..." msgstr "/_Névjegy..." #: ../../standalone/harddrake2_.c:104 msgid "About Harddrake" msgstr "A HardDrake névjegye" #: ../../standalone/harddrake2_.c:105 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" "HardDrake - Mandrake hardverbeállítási program.\n" "Verzió:" #: ../../standalone/harddrake2_.c:106 msgid "Author:" msgstr "Szerző:" #: ../../standalone/harddrake2_.c:113 msgid "Detection in progress" msgstr "Felderítés folyamatban" #: ../../standalone/harddrake2_.c:119 msgid "Harddrake2 version " msgstr "HardDrake2 verzió " #: ../../standalone/harddrake2_.c:126 msgid "Detected hardware" msgstr "A megtalált hardver" #: ../../standalone/harddrake2_.c:129 msgid "Information" msgstr "Információ" #: ../../standalone/harddrake2_.c:131 msgid "Configure module" msgstr "Modul beállítása" #: ../../standalone/harddrake2_.c:137 msgid "Run config tool" msgstr "Beállítóprogram indítása" #: ../../standalone/harddrake2_.c:143 #, c-format msgid "Running \"%s\" ..." msgstr "\"%s\" végrehajtása..." #: ../../standalone/harddrake2_.c:159 msgid "" "Click on a device in the left tree in order to get its information displayed " "here." msgstr "" #: ../../standalone/harddrake2_.c:231 msgid "primary" msgstr "elsődleges" #: ../../standalone/harddrake2_.c:231 msgid "secondary" msgstr "másodlagos" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect modems" msgstr "Automatikusan felderítve" #: ../../standalone/harddrake2_.c:260 #, fuzzy msgid "/Autodetect printers" msgstr "Automatikusan felderítve" #: ../../standalone/harddrake2_.c:261 #, fuzzy msgid "/Options" msgstr "/_Beállítások" #: ../../standalone/keyboarddrake_.c:26 msgid "Please, choose your keyboard layout." msgstr "Válasszon billentyűzetkiosztást." #: ../../standalone/keyboarddrake_.c:35 msgid "Do you want the BackSpace to return Delete in console?" msgstr "Parancsértelmezőben a BackSpace billentyű \"Delete\"-et jelentsen?" #: ../../standalone/livedrake_.c:18 msgid "Change Cd-Rom" msgstr "Cserélje ki a CD lemezt" #: ../../standalone/livedrake_.c:19 msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Helyezze be a telepítési CD-t a meghajtóba és nyomja meg az OK gombot.\n" "Ha nincs ilyen lemeze, akkor nyomja meg a \"Mégsem\" gombot a frissítés\n" "kihagyásához." #: ../../standalone/livedrake_.c:29 msgid "Unable to start live upgrade !!!\n" msgstr "Nem sikerült elindítani a frissítést!\n" #: ../../standalone/localedrake_.c:34 msgid "The change is done, but to be effective you must logout" msgstr "A módosítás megtörtént, de az érvénybe lépéséhez ki kell jelentkezni" #: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350 msgid "logdrake" msgstr "logdrake" #: ../../standalone/logdrake_.c:68 msgid "Show only for the selected day" msgstr "Csak a kijelölt napot jelenítse meg" #: ../../standalone/logdrake_.c:75 msgid "/File/_New" msgstr "/Fájl/Ú_j" #: ../../standalone/logdrake_.c:75 msgid "N" msgstr "N" #: ../../standalone/logdrake_.c:76 msgid "/File/_Open" msgstr "/Fájl/_Megnyitás" #: ../../standalone/logdrake_.c:76 msgid "O" msgstr "O" #: ../../standalone/logdrake_.c:77 msgid "/File/_Save" msgstr "/Fájl/M_entés" #: ../../standalone/logdrake_.c:77 msgid "S" msgstr "S" #: ../../standalone/logdrake_.c:78 msgid "/File/Save _As" msgstr "/Fájl/Mentés más_ként" #: ../../standalone/logdrake_.c:79 msgid "/File/-" msgstr "/Fájl/-" #: ../../standalone/logdrake_.c:82 msgid "/Options/Test" msgstr "/Beállítások/Próba" #: ../../standalone/logdrake_.c:84 msgid "/Help/_About..." msgstr "/Segítség/_Névjegy..." #: ../../standalone/logdrake_.c:145 msgid "User" msgstr "Felhasználó" #: ../../standalone/logdrake_.c:146 msgid "Messages" msgstr "Üzenetek" #: ../../standalone/logdrake_.c:147 msgid "Syslog" msgstr "Rendszernapló" # *drak* tools aren't hiding their work from users anymore. # Thanks to the 'explanations' concept, each utility shows # what it did by writing to /var/log/explanations #: ../../standalone/logdrake_.c:148 msgid "Mandrake Tools Explanations" msgstr "Mandrake eszközök - magyarázat" #: ../../standalone/logdrake_.c:151 msgid "search" msgstr "keresés" #: ../../standalone/logdrake_.c:161 msgid "A tool to monitor your logs" msgstr "Naplófigyelő" #: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91 msgid "Settings" msgstr "Beállítások" #: ../../standalone/logdrake_.c:167 msgid "matching" msgstr "ezzel egyező" #: ../../standalone/logdrake_.c:168 msgid "but not matching" msgstr "de ezzel nem egyező" # több is választható #: ../../standalone/logdrake_.c:172 msgid "Choose file" msgstr "Válasszon fájlt" #: ../../standalone/logdrake_.c:181 msgid "Calendar" msgstr "Naptár" #: ../../standalone/logdrake_.c:191 msgid "Content of the file" msgstr "A fájl tartalma" #: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375 msgid "Mail alert" msgstr "Email-figyelmeztetés" #: ../../standalone/logdrake_.c:245 #, c-format msgid "please wait, parsing file: %s" msgstr "a fájl elemzése folyamatban: %s" #: ../../standalone/logdrake_.c:392 msgid "Mail alert configuration" msgstr "Email-figyelmeztetés beállításai" #: ../../standalone/logdrake_.c:393 msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Üdvözöljük az email-beállítóprogramban.\n" "\n" "A programmal beállítható a figyelmeztetések küldése.\n" #: ../../standalone/logdrake_.c:400 msgid "Apache World Wide Web Server" msgstr "Apache World Wide Web kiszolgáló" #: ../../standalone/logdrake_.c:401 msgid "Domain Name Resolver" msgstr "Tartománynév-feloldó" #: ../../standalone/logdrake_.c:402 msgid "Ftp Server" msgstr "FTP-kiszolgáló" #: ../../standalone/logdrake_.c:403 msgid "Postfix Mail Server" msgstr "Postfix email-kiszolgáló" #: ../../standalone/logdrake_.c:404 msgid "Samba Server" msgstr "Samba-kiszolgáló" #: ../../standalone/logdrake_.c:405 msgid "SSH Server" msgstr "SSH-kiszolgáló" #: ../../standalone/logdrake_.c:406 msgid "Webmin Service" msgstr "Webmin szolgáltatás" #: ../../standalone/logdrake_.c:407 msgid "Xinetd Service" msgstr "Xinetd szolgáltatás" #: ../../standalone/logdrake_.c:414 msgid "service setting" msgstr "szolgáltatásbeállítás" #: ../../standalone/logdrake_.c:415 msgid "" "You will receive an alert if one of the selected services is no more running" msgstr "" "A rendszer figyelmeztetést küld, ha a kijelölt szolgáltatások valamelyike " "nem fut" #: ../../standalone/logdrake_.c:428 msgid "load setting" msgstr "terhelésbeállítás" #: ../../standalone/logdrake_.c:429 msgid "You will receive an alert if the load is higher than this value" msgstr "A rendszer figyelmeztetést küld, ha a terhelés ezen értéknél magasabb" #: ../../standalone/logdrake_.c:444 msgid "alert configuration" msgstr "figyelmeztetés beállítása" #: ../../standalone/logdrake_.c:445 msgid "Please enter your email address below " msgstr "Adja meg az email-címét " #: ../../standalone/logdrake_.c:486 msgid "Save as.." msgstr "Mentés másként..." #: ../../standalone/mousedrake_.c:37 msgid "Please, choose the type of your mouse." msgstr "Adja meg az egér típusát." #: ../../standalone/mousedrake_.c:50 msgid "Emulate third button?" msgstr "Emuláljam a harmadik gombot?" #: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87 #, fuzzy msgid "Network Monitoring" msgstr "Hálózatbeállítás" #: ../../standalone/net_monitor_.c:96 #, fuzzy msgid "Profile " msgstr "Profil: " #: ../../standalone/net_monitor_.c:99 msgid "Statistics" msgstr "" #: ../../standalone/net_monitor_.c:103 #, fuzzy msgid "Sending Speed:" msgstr "Fájlok küldése..." #: ../../standalone/net_monitor_.c:104 msgid "Receiving Speed:" msgstr "" #: ../../standalone/net_monitor_.c:106 #, fuzzy msgid "Connection Time: " msgstr "A csatlakozás típusa: " #: ../../standalone/net_monitor_.c:113 msgid "Logs" msgstr "" #: ../../standalone/net_monitor_.c:147 #, fuzzy msgid "Wait please, testing your connection..." msgstr "A kapcsolat ellenőrzése..." #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Connecting to Internet " msgstr "Csatlakozás az internethez" #: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191 #, fuzzy msgid "Disconnecting from Internet " msgstr "Csatlakozás az internethez" #: ../../standalone/net_monitor_.c:222 msgid "Disconnection from Internet failed." msgstr "" #: ../../standalone/net_monitor_.c:223 msgid "Disconnection from Internet complete." msgstr "" #: ../../standalone/net_monitor_.c:225 #, fuzzy msgid "Connection complete." msgstr "Csatlakozási sebesség" #: ../../standalone/net_monitor_.c:226 msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor_.c:330 #, fuzzy msgid "Color configuration" msgstr "figyelmeztetés beállítása" #: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403 msgid "sent: " msgstr "" #: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407 msgid "received: " msgstr "" #: ../../standalone/net_monitor_.c:397 msgid "average" msgstr "" #: ../../standalone/net_monitor_.c:400 #, fuzzy msgid "Local measure" msgstr "Helyi fájlok" #: ../../standalone/net_monitor_.c:432 msgid "transmitted" msgstr "" #: ../../standalone/net_monitor_.c:433 msgid "received" msgstr "" #: ../../standalone/net_monitor_.c:453 #, fuzzy msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Figyelmeztetés: Egy másik internetkapcsolat is létezik, esetlegesen a " "hálózatot használva." #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Connect %s" msgstr "Csatlakozás" #: ../../standalone/net_monitor_.c:459 #, fuzzy, c-format msgid "Disconnect %s" msgstr "A kapcsolat bontása" #: ../../standalone/printerdrake_.c:47 msgid "Reading printer data ..." msgstr "A nyomtatóadatok beolvasása..." #: ../../standalone/scannerdrake_.c:39 msgid "Detecting devices ..." msgstr "Eszközök keresése..." #: ../../standalone/scannerdrake_.c:39 msgid "Test ports" msgstr "A portok ellenőrzése" #: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66 #: ../../standalone/scannerdrake_.c:79 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "A Mandrake Linux jelenleg használt verziója nem támogatja ezt: %s." #: ../../standalone/scannerdrake_.c:54 #, c-format msgid "%s found on %s, configure it?" msgstr "\"%s\" található itt: \"%s\"; kívánja beállítani?" #: ../../standalone/scannerdrake_.c:57 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "\"%s\" nem szerepel a lapolvasó-adatbázisban; beállítja saját kezűleg?" #: ../../standalone/scannerdrake_.c:63 msgid "Select a scanner" msgstr "Válasszon egy lapolvasót" #: ../../standalone/scannerdrake_.c:91 #, c-format msgid "This %s scanner is unsupported" msgstr "Ez a lapolvasó nincs támogatva: %s" #: ../../standalone/scannerdrake_.c:105 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" "Please select the device where your scanner is plugged" msgstr "" "A ScannerDrake nem találta meg az Ön \"%s\" lapolvasóját.\n" "Válassza ki, melyik eszközhöz csatlakozik a lapolvasó." #: ../../standalone/scannerdrake_.c:107 msgid "choose device" msgstr "válassza ki az eszközt" #: ../../standalone/scannerdrake_.c:113 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" "A(z) \"%s\" lapolvasót a PrinterDrake programmal lehet beállítani.\n" "A PrinterDrake-et a Mandrake Vezérlőközpont \"Hardver\" részében indíthatja " "el." #: ../../standalone/scannerdrake_.c:118 #, c-format msgid "" "Your %s scanner has been configured.\n" "You may now scan documents using ``XSane'' from Multimedia/Graphics in the " "applications menu." msgstr "" "Az Ön \"%s\" lapolvasója beállításra került.\n" "Dokumentumok beolvasására használhatja például az \"XSane\" programot, amely " "az alkalmazásmenü \"Multimédia/Grafika\" részében található." #: ../../standalone/service_harddrake_.c:44 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "A(z) \"%s\" hardverosztály bizonyos eszközei eltávolításra kerültek:\n" #: ../../standalone/service_harddrake_.c:48 msgid "Some devices were added:\n" msgstr "Bizonyos eszközök fel lettek véve:\n" #: ../../standalone/service_harddrake_.c:64 #, fuzzy msgid "Hardware probing in progress" msgstr "Felderítés folyamatban" #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "Válasszon nyelvet" #: ../../steps.pm_.c:15 msgid "Select installation class" msgstr "Válasszon telepítési módot" #: ../../steps.pm_.c:16 msgid "Hard drive detection" msgstr "Merevlemez keresése" #: ../../steps.pm_.c:17 msgid "Configure mouse" msgstr "Egér beállítása" #: ../../steps.pm_.c:18 msgid "Choose your keyboard" msgstr "Billentyűzet kiválasztása" #: ../../steps.pm_.c:19 msgid "Security" msgstr "Biztonság" #: ../../steps.pm_.c:20 msgid "Setup filesystems" msgstr "Fájlrendszerek beállítása" #: ../../steps.pm_.c:21 msgid "Format partitions" msgstr "Partíciók formázása" #: ../../steps.pm_.c:22 msgid "Choose packages to install" msgstr "Csomagok kiválasztása" #: ../../steps.pm_.c:23 msgid "Install system" msgstr "Rendszer telepítése" #: ../../steps.pm_.c:25 msgid "Add a user" msgstr "Felhasználó hozzáadása" #: ../../steps.pm_.c:26 msgid "Configure networking" msgstr "Hálózat beállítása" #: ../../steps.pm_.c:28 msgid "Configure services" msgstr "Szolgáltatások beállítása" #: ../../steps.pm_.c:29 msgid "Install bootloader" msgstr "Rendszerindító telepítése" #: ../../steps.pm_.c:31 msgid "Create a bootdisk" msgstr "Indítólemez készítése" #: ../../steps.pm_.c:33 msgid "Configure X" msgstr "Az X beállítása" # "Rendszerfrissítések telepítése" volt a 8.2-ben, # ebből az utolsó 2 betű nem fért ki #: ../../steps.pm_.c:34 msgid "Install system updates" msgstr "Rendszerfrissítés-telepítés" #: ../../steps.pm_.c:35 msgid "Exit install" msgstr "Kilépés a telepítőből" #: ../../ugtk.pm_.c:636 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" #: ../../ugtk2.pm_.c:711 msgid "utopia 25" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "Web/FTP" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "Hálózati számítógép (kliens)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "NFS-, SMB-, proxy- és SSH-kiszolgáló" #: ../../share/compssUsers:999 msgid "Office" msgstr "Iroda" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "GNOME-munkaállomás" #: ../../share/compssUsers:999 msgid "Tools for your Palm Pilot or your Visor" msgstr "Segédprogramok a Palmhoz és a Visorhoz" #: ../../share/compssUsers:999 msgid "Workstation" msgstr "Munkaállomás" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "Tűzfal/útválasztó (router)" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "DNS- és NIS-kiszolgáló" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Irodai programok: szövegszerkesztők (KWord, AbiWord), táblázatkezelők " "(KSpread, Gnumeric), PDF-nézegetők, ..." #: ../../share/compssUsers:999 msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "Hangkezelő eszközök: MP3- és MIDI-lejátszók, hangkeverők, ..." #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "Linux Standard Base. Külső társaságok alkalmazásainak támogatása." #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "Könyvek és HOGYAN-ok a Linuxról és a szabad szoftverekről" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "KDE-munkaállomás" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "IceWM, WindowMaker, Enlightenment, Fvwm, ..." #: ../../share/compssUsers:999 msgid "Multimedia - Video" msgstr "Multimédia - videó" #: ../../share/compssUsers:999 msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "Email-eszközök, hírkezelés, web-eszközök, fájlátvitel és csevegés" #: ../../share/compssUsers:999 msgid "Database" msgstr "Adatbázis" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "PostgreSQL vagy MySQL adatbázis-kiszolgáló" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "Segédprogramok a számítógép beállításához" #: ../../share/compssUsers:999 msgid "Multimedia - Sound" msgstr "Multimédia - hang" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "Dokumentáció" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Parancssoros eszközök" #: ../../share/compssUsers:999 msgid "Postfix mail server, Inn news server" msgstr "Postfix email-kiszolgáló, Inn hírkiszolgáló" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "Internetes munkaállomás" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "Multimédiás munkaállomás" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "Beállítás" #: ../../share/compssUsers:999 msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "További grafikus környezetek (GNOME, IceWM)" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "A K Desktop Environment - az alapvető grafikus környezet - az ahhoz tartozó " "eszközökkel együtt" #: ../../share/compssUsers:999 msgid "Graphical Environment" msgstr "Grafikus környezet" #: ../../share/compssUsers:999 msgid "Development" msgstr "Fejlesztés" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache, Pro-ftpd" #: ../../share/compssUsers:999 msgid "Tools to create and burn CD's" msgstr "Segédprogramok CD-íráshoz" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "Irodai munkaállomás" #: ../../share/compssUsers:999 msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "GNOME, IceWM, WindowMaker, Enlightenment, Fvwm, ..." #: ../../share/compssUsers:999 msgid "Graphics programs such as The Gimp" msgstr "Grafikai programok (például a GIMP)" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "DNS/NIS" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "C/C++ fejlesztőkönyvtárak, programok és include fájlok" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "Kiszolgáló hálózati számítógépekhez" #: ../../share/compssUsers:999 msgid "Mail/Groupware/News" msgstr "E-mail/csoportmunka/hírek" #: ../../share/compssUsers:999 msgid "Game station" msgstr "Játékgép" #: ../../share/compssUsers:999 msgid "Video players and editors" msgstr "Videólejátszók és -szerkesztők" #: ../../share/compssUsers:999 msgid "Multimedia - Graphics" msgstr "Multimédia - grafika" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Játékprogramok: lövöldözős, táblás, stratégiai, ..." #: ../../share/compssUsers:999 msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" "Eszközök levelezéshez, hírkezeléshez (pine, mutt, tin, ...) és a Web " "böngészéséhez" #: ../../share/compssUsers:999 msgid "Personal Finance" msgstr "Személyes pénzügyek" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Grafikus környezet felhasználóbarát alkalmazásokkal és segédprogramokkal" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "Kliensprogramok különféle protokollokhoz (például: ssh)" #: ../../share/compssUsers:999 msgid "LSB" msgstr "LSB" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "Internet-átjáró" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Hang/videólejátszó és -szerkesztő programok" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Más grafikus környezetek" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Szövegszerkesztők, parancsértelmezők, fájlkezelők, terminálprogramok" #: ../../share/compssUsers:999 msgid "Programs to manage your finance, such as gnucash" msgstr "Programok a személyes pénzügyek kezeléséhez (például: GnuCash)" #: ../../share/compssUsers:999 msgid "Personal Information Management" msgstr "Személyes információkezelés" #: ../../share/compssUsers:999 msgid "Multimedia - CD Burning" msgstr "Multimédia - CD-írás" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "Tudományos munkaállomás" #~ msgid "can not open /etc/inittab for reading: %s" #~ msgstr "Az /etc/inittab fájlt nem sikerült olvasásra megnyitni: %s" #, fuzzy #~ msgid "cpu number " #~ msgstr "egy szám" #~ msgid "" #~ "You now have the opportunity to download encryption software.\n" #~ "\n" #~ "WARNING:\n" #~ "\n" #~ "Due to different general requirements applicable to these software and " #~ "imposed\n" #~ "by various jurisdictions, customer and/or end user of theses software " #~ "should\n" #~ "ensure that the laws of his/their jurisdiction allow him/them to " #~ "download, stock\n" #~ "and/or use these software.\n" #~ "\n" #~ "In addition customer and/or end user shall particularly be aware to not " #~ "infringe\n" #~ "the laws of his/their jurisdiction. Should customer and/or end user not\n" #~ "respect the provision of these applicable laws, he/they will incure " #~ "serious\n" #~ "sanctions.\n" #~ "\n" #~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " #~ "liable\n" #~ "for special, indirect or incidental damages whatsoever (including, but " #~ "not\n" #~ "limited to loss of profits, business interruption, loss of commercial " #~ "data and\n" #~ "other pecuniary losses, and eventual liabilities and indemnification to " #~ "be paid\n" #~ "pursuant to a court decision) arising out of use, possession, or the " #~ "sole\n" #~ "downloading of these software, to which customer and/or end user could\n" #~ "eventually have access after having sign up the present agreement.\n" #~ "\n" #~ "\n" #~ "For any queries relating to these agreement, please contact \n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgstr "" #~ "Most lehetőség nyílik arra, hogy titkosítással foglalkozó " #~ "szoftverrészeket\n" #~ "töltsön le.\n" #~ "\n" #~ "FIGYELMEZTETÉS:\n" #~ "\n" #~ "Mivel a titkosítással foglalkozó szoftvermodulok használatát különböző\n" #~ "törvények szabályozzák, kizárólag a fogyasztó és/vagy felhasználó\n" #~ "felelőssége eldönteni, hogy jogosult-e letölteni, tárolni és/vagy " #~ "használni\n" #~ "a kérdéses szoftvert.\n" #~ "\n" #~ "Továbbá, a fogyasztó és/vagy felhasználó különös figyelmet kell fordítson " #~ "a\n" #~ "helyi törvények és rendeletek betartására. Amennyiben a fogyasztó és/" #~ "vagy\n" #~ "felhasználó nem tartja be ezeket a törvényeket, súlyos büntetés szabható " #~ "ki\n" #~ "rá.\n" #~ "\n" #~ "A Mandrakesoft, a gyártók, vagy a szállítók semmilyen körülmények között\n" #~ "sem tehetők felelőssé azon speciális, közvetett vagy járulékos károk\n" #~ "keletkezéséért (beleértve, de nem kizárólagosan, a következőket:\n" #~ "profitveszteség, üzletmenetben bekövetkezett zavarok, kereskedelmi " #~ "adatok\n" #~ "vesztése, valamint bármilyen más anyagi kár és esetlegesen bíróság által\n" #~ "megítélt kártérítés), amik azon szoftverek használatából, birtoklásából " #~ "vagy\n" #~ "csak a letöltéséből erednek, amelyekhez a felhasználó és/vagy fogyasztó " #~ "ezen\n" #~ "megállapodás aláírása után hozzáférhet.\n" #~ "\n" #~ "\n" #~ "Ha bármilyen kérdése van a fenti szerződéssel kapcsolatban, vegye fel\n" #~ "a kapcsolatot a Mandrakesoft irodájával:\n" #~ "Mandrakesoft, Inc.\n" #~ "2400 N. Lincoln Avenue Suite 243\n" #~ "Altadena California 91001\n" #~ "USA" #~ msgid "Proxy configuration" #~ msgstr "Proxy-beállítások" #~ msgid "" #~ "Welcome to the proxy configuration utility.\n" #~ "\n" #~ "Here, you'll be able to set up your http and ftp proxies\n" #~ "with or without login and password\n" #~ msgstr "" #~ "Üdvözöljük a proxy-beállító segédprogramban!\n" #~ "\n" #~ "Itt lehet megadni a HTTP- és FTP-proxy adatait,\n" #~ "a bejelentkezési információval együtt\n" #~ msgid "" #~ "Please fill in the http proxy informations\n" #~ "Leave it blank if you don't want an http proxy" #~ msgstr "" #~ "Adja meg a HTTP-proxy adatait.\n" #~ "Hagyja üresen, ha nem kíván HTTP-proxyt használni." #~ msgid "URL" #~ msgstr "URL" #~ msgid "port" #~ msgstr "port" #~ msgid "Url should begin with 'http:'" #~ msgstr "Az URL-nek így kell kezdődnie: \"http:\"" #~ msgid "The port part should be numeric" #~ msgstr "A portnak számnak kell lennie" #~ msgid "" #~ "Please fill in the ftp proxy informations\n" #~ "Leave it blank if you don't want an ftp proxy" #~ msgstr "" #~ "Adja meg az FTP-proxy adatait.\n" #~ "Hagyja üresen, ha nem kíván FTP-proxyt használni." #~ msgid "" #~ "Please enter proxy login and password, if any.\n" #~ "Leave it blank if you don't want login/passwd" #~ msgstr "" #~ "Adja meg a proxy használatához szükséges nevet és jelszót.\n" #~ "Hagyja üresen, ha erre nincs szükség." #~ msgid "login" #~ msgstr "felhasználónév" #~ msgid "password" #~ msgstr "jelszó" #~ msgid "re-type password" #~ msgstr "a jelszó még egyszer" #~ msgid "The passwords don't match. Try again!" #~ msgstr "A jelszavak nem egyeznek meg, adja meg őket még egyszer!" #~ msgid "Can't write file %s" #~ msgstr "Nem tudom írni a(z) %s fájlt" #~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #~ msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*" #, fuzzy #~ msgid "" #~ "Warning, another internet connexion has been detected, maybe using your " #~ "network" #~ msgstr "" #~ "Figyelmeztetés: Egy másik internetkapcsolat is létezik, esetlegesen a " #~ "hálózatot használva." #~ msgid "no help implemented yet.\n" #~ msgstr "még nem használható a segítség\n" #~ msgid "Please click on a medium" #~ msgstr "Kattintson egy médiumra" #~ msgid "Removing LPRng..." #~ msgstr "Az LPRng eltávolítása..." #~ msgid "Removing LPD..." #~ msgstr "Az LPD eltávolítása..." #~ msgid "" #~ "Description:\n" #~ "\n" #~ " Drakbackup is used to backup your system.\n" #~ " During the configuration you can select \n" #~ "\t- System files, \n" #~ "\t- Users files, \n" #~ "\t- Other files.\n" #~ "\tor All your system ... and Other (like Windows Partitions)\n" #~ "\n" #~ " Drakbackup allows you to backup your system on:\n" #~ "\t- Harddrive.\n" #~ "\t- NFS.\n" #~ "\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n" #~ "\t- FTP.\n" #~ "\t- Rsync.\n" #~ "\t- Webdav.\n" #~ "\t- Tape.\n" #~ "\n" #~ " Drakbackup allows you to restore your system to\n" #~ " a user selected directory.\n" #~ "\n" #~ " Per default all backup will be stored on your\n" #~ " /var/lib/drakbackup directory\n" #~ "\n" #~ " Configuration file:\n" #~ "\t/etc/drakconf/drakbackup/drakbakup.conf\n" #~ "\n" #~ "Restore Step:\n" #~ " \n" #~ " During the restore step, Drakbackup will remove\n" #~ " your original directory and verify that all\n" #~ " backup files are not corrupted. It is recommended\n" #~ " you do a last backup before restoring.\n" #~ " \n" #~ "\n" #~ msgstr "" #~ "Leírás:\n" #~ "\n" #~ " A DrakBackup program a rendszer mentésére használható.\n" #~ " Beállítható, mi legyen mentve:\n" #~ "\t- rendszerfájlok\n" #~ "\t- felhasználói fájlok\n" #~ "\t- egyéb fájlok\n" #~ "\tvagy a teljes rendszer és az egyéb adatok (például Windows partíciók)\n" #~ "\n" #~ " A DrakBackup a következő helyekre képes menteni:\n" #~ "\t- merevlemez\n" #~ "\t- NFS\n" #~ "\t- CD (CD-RW), DVD (automatikus rendszerindítással,\n" #~ "\t helyreállítással és automatikus telepítéssel)\n" #~ "\t- FTP\n" #~ "\t- rsync\n" #~ "\t- Webdav\n" #~ "\t- szalag\n" #~ "\n" #~ " A DrakBackup lehetővé teszi a rendszernek egy kiválasztott\n" #~ " könyvtárba való visszatöltését.\n" #~ "\n" #~ " Alapértelmezés szerint az összes mentés a /var/lib/drakbackup\n" #~ " könyvtárba kerül.\n" #~ "\n" #~ " A beállításokat tartalmazó fájl:\n" #~ "\t/etc/drakconf/drakbackup/drakbakup.conf\n" #~ "\n" #~ "Mentés visszatöltése:\n" #~ "\n" #~ " Visszatöltés közben a DrakBackup eltávolítja az\n" #~ " eredeti könyvtárt, és ellenőrzi, hogy nincsenek-e\n" #~ " megsérülve a mentéseket tároló fájlok. Visszatöltés\n" #~ " előtt javasolt még egy mentést készíteni.\n" #~ "\n" #~ "\n" #~ msgid "" #~ "drakbug version %s\n" #~ "Copyright (C) 2002 MandrakeSoft.\n" #~ "This is free software and may be redistributed under the terms of the GNU " #~ "GPL.\n" #~ "\n" #~ "usage: drakbug [OPTIONS] [PROGRAM_NAME]\n" #~ "\n" #~ "OPTIONS:\n" #~ msgstr "" #~ "drakbug %s\n" #~ "Copyright (C) 2002 MandrakeSoft.\n" #~ "Ez a program szabad szoftver; a GNU GPL alapján terjeszthető.\n" #~ "\n" #~ "Használat: drakbug [OPCIÓK] [PROGRAMNÉV]\n" #~ "\n" #~ "OPCIÓK:\n" #~ msgid " --help - print this help message.\n" #~ msgstr " --help - jelen segítség megjelenítése\n" #~ msgid " --report - program should be one of mandrake tools\n" #~ msgstr "" #~ " --report - a programnak egy Mandrake-eszköznek kell lenni\n" #~ msgid " --incident - program should be one of mandrake tools\n" #~ msgstr "" #~ " --incident - a programnak egy Mandrake-eszköznek kell lenni\n" #~ msgid "usage: drakfloppy\n" #~ msgstr "használat: drakfloppy\n" #~ msgid "" #~ "\n" #~ "Usage: harddrake [-h|--help] [--test]\n" #~ msgstr "" #~ "\n" #~ "Használat: harddrake [-h|--help] [--test]\n" #~ msgid "usage: keyboarddrake [--expert] [keyboard]\n" #~ msgstr "használat: keyboarddrake [--expert] [billentyűzet]\n" #~ msgid "Probing %s class\n" #~ msgstr "A(z) %s osztály felderítése\n" #~ msgid "detected on interface %s" #~ msgstr "detektálva a(z) %s csatlakozón" #~ msgid "Periodic Checks 2" #~ msgstr "Periodikus ellenőrzések 2" #~ msgid "unable to backup lilo message" #~ msgstr "A LILO-üzenet elmentése sikertelen" #~ msgid "can't change lilo message" #~ msgstr "A LILO-üzenet nem módosítható"