# KTranslator Generated File # KTranslator Generated File # Copyright (c) 1999 MandrakeSoft # Vladimir Vuksan , 1999. msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 2000-05-16 14:30+0200\n" "PO-Revision-Date: Mon May 15 2000 16:41:41+0200\n" "Last-Translator: Vladimir Vuksan \n" "Language-Team: Croatian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=iso-8859-2\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KTranslator v 0.5.0\n" #: ../../Xconfigurator.pm_.c:116 ../../Xconfigurator.pm_.c:228 msgid "Generic" msgstr "" #: ../../Xconfigurator.pm_.c:165 msgid "Graphic card" msgstr "Grafička kartica" #: ../../Xconfigurator.pm_.c:165 msgid "Select a graphic card" msgstr "Odaberite grafičku karticu" #: ../../Xconfigurator.pm_.c:166 msgid "Choose a X server" msgstr "Odaberite X poslužitelj" #: ../../Xconfigurator.pm_.c:166 msgid "X server" msgstr "X poslužitelj" #: ../../Xconfigurator.pm_.c:190 msgid "Select the memory size of your graphic card" msgstr "Odaberite količinu memorije na grafičkoj kartici" #: ../../Xconfigurator.pm_.c:217 msgid "Choose options for server" msgstr "Postavke poslužitelja" #: ../../Xconfigurator.pm_.c:228 msgid "Choose a monitor" msgstr "Odaberite monitor" #: ../../Xconfigurator.pm_.c:228 msgid "Monitor" msgstr "Monitor" #: ../../Xconfigurator.pm_.c:231 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../Xconfigurator.pm_.c:238 msgid "Horizontal refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:238 msgid "Vertical refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:277 msgid "Monitor not configured" msgstr "Niste podesili monitor" #: ../../Xconfigurator.pm_.c:280 msgid "Graphic card not configured yet" msgstr "Niste podesili grafičku karticu" #: ../../Xconfigurator.pm_.c:283 msgid "Resolutions not chosen yet" msgstr "Niste podesili rezoluciju" #: ../../Xconfigurator.pm_.c:296 msgid "Do you want to test the configuration?" msgstr "Da li želite iskušati postavu ?" #: ../../Xconfigurator.pm_.c:300 msgid "Warning: testing is dangerous on this graphic card" msgstr "Upozorenje: opasno je iskušavati rezolucije na ovoj grafičkoj kartici" #: ../../Xconfigurator.pm_.c:303 msgid "Test of the configuration" msgstr "Iskušaj postavu" #: ../../Xconfigurator.pm_.c:342 msgid "" "\n" "try to change some parameters" msgstr "" "\n" "provjerite parametre koje ste unjeli" #: ../../Xconfigurator.pm_.c:342 msgid "An error has occurred:" msgstr "Pojavila se greška:" #: ../../Xconfigurator.pm_.c:365 #, c-format msgid "Leaving in %d seconds" msgstr "Zatvaram nakon %d sekundi" #: ../../Xconfigurator.pm_.c:369 msgid "Is this the correct setting?" msgstr "Da li je ovo ispravno?" #: ../../Xconfigurator.pm_.c:377 msgid "An error has occurred, try to change some parameters" msgstr "Pojavila se greška, provjerite parametre koje ste unjeli" #: ../../Xconfigurator.pm_.c:385 ../../Xconfigurator.pm_.c:558 msgid "Automatic resolutions" msgstr "Automatski odabir rezolucije" #: ../../Xconfigurator.pm_.c:386 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" "Kako bih pronašao dostupne rezolucije moram pokušati par različitih.\n" "Monitor će tokom pretrage treptati...\n" "Ukoliko želite slobodno isključite monitor. Nakon što je sve gotovo čuti će " "te pip." #: ../../Xconfigurator.pm_.c:441 ../../printerdrake.pm_.c:167 msgid "Resolution" msgstr "Rezolucija" #: ../../Xconfigurator.pm_.c:476 msgid "Choose the resolution and the color depth" msgstr "Odaberite rezoluciju i color depth" #: ../../Xconfigurator.pm_.c:478 #, c-format msgid "Graphic card: %s" msgstr "Grafička kartica: %s" #: ../../Xconfigurator.pm_.c:479 #, c-format msgid "XFree86 server: %s" msgstr "XFree86 poslužitelj: %s" #: ../../Xconfigurator.pm_.c:488 msgid "Show all" msgstr "Pokaži sve" #: ../../Xconfigurator.pm_.c:512 msgid "Resolutions" msgstr "Rezolucije" #: ../../Xconfigurator.pm_.c:559 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" "Mogu pokušati pronaći dostupnu rezoluciju (npr. 800x600).\n" "Međutim ponekad takva pretraga može zamrznuti računalo.\n" "Da li ste sigurni da želite nastaviti?" #: ../../Xconfigurator.pm_.c:564 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" "Niti jedan valjan mode nije nađen\n" "Probajte sa drugom grafičkom karticom ili monitorom" #: ../../Xconfigurator.pm_.c:904 #, c-format msgid "Keyboard layout: %s\n" msgstr "Raspored tipkovnice: %s\n" #: ../../Xconfigurator.pm_.c:905 #, c-format msgid "Mouse type: %s\n" msgstr "Vrsta miša: %s\n" #: ../../Xconfigurator.pm_.c:906 #, c-format msgid "Mouse device: %s\n" msgstr "Uređaj miša: %s\n" #: ../../Xconfigurator.pm_.c:907 #, c-format msgid "Monitor: %s\n" msgstr "Monitor: %s\n" #: ../../Xconfigurator.pm_.c:908 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Monitor HorizSync: %s\n" #: ../../Xconfigurator.pm_.c:909 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Monitor VertRefresh: %s\n" #: ../../Xconfigurator.pm_.c:910 #, c-format msgid "Graphic card: %s\n" msgstr "Grafička kartica: %s\n" #: ../../Xconfigurator.pm_.c:911 #, c-format msgid "Graphic memory: %s kB\n" msgstr "Grafička memorija: %s kB\n" #: ../../Xconfigurator.pm_.c:912 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 poslužitelj: %s\n" #: ../../Xconfigurator.pm_.c:927 msgid "Preparing X-Window configuration" msgstr "Pripremam X-Window postavu" #: ../../Xconfigurator.pm_.c:941 msgid "Change Monitor" msgstr "Promijeni monitor" #: ../../Xconfigurator.pm_.c:942 msgid "Change Graphic card" msgstr "Promijeni grafičku karticu" #: ../../Xconfigurator.pm_.c:943 msgid "Change Server options" msgstr "Promijeni postavke poslužitelja" #: ../../Xconfigurator.pm_.c:944 msgid "Change Resolution" msgstr "Promijeni rezoluciju" #: ../../Xconfigurator.pm_.c:945 msgid "Automatical resolutions search" msgstr "Automatski traži rezoluciju" #: ../../Xconfigurator.pm_.c:949 msgid "Show information" msgstr "Prikaži informacije" #: ../../Xconfigurator.pm_.c:950 msgid "Test again" msgstr "Iskušaj ponovo" #: ../../Xconfigurator.pm_.c:951 ../../standalone/rpmdrake_.c:46 msgid "Quit" msgstr "Završi" #: ../../Xconfigurator.pm_.c:955 ../../standalone/drakboot_.c:36 msgid "What do you want to do?" msgstr "Što želite napraviti?" #: ../../Xconfigurator.pm_.c:962 msgid "Forget the changes?" msgstr "Odbaci promjene?" #: ../../Xconfigurator.pm_.c:980 #, c-format msgid "Please relog into %s to activate the changes" msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno" #: ../../Xconfigurator.pm_.c:996 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace" #: ../../Xconfigurator.pm_.c:999 msgid "X at startup" msgstr "X kod pokretanja sustava" #: ../../Xconfigurator.pm_.c:1000 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" "Mogu podesiti da se X podigne automatski kod podizanja sustava.\n" "Da li želite da se X automatski pokreće?" #: ../../Xconfigurator_consts.pm_.c:4 msgid "256 colors (8 bits)" msgstr "256 boja (8 bita)" #: ../../Xconfigurator_consts.pm_.c:5 msgid "32 thousand colors (15 bits)" msgstr "32 tisuća boja (15 bita)" #: ../../Xconfigurator_consts.pm_.c:6 msgid "65 thousand colors (16 bits)" msgstr "65 tisuća boja (16 bita)" #: ../../Xconfigurator_consts.pm_.c:7 msgid "16 million colors (24 bits)" msgstr "16 milijuna boja (24 bita)" #: ../../Xconfigurator_consts.pm_.c:8 msgid "4 billion colors (32 bits)" msgstr "4 milijarde boja (32 bita)" #: ../../Xconfigurator_consts.pm_.c:103 msgid "256 kB" msgstr "256 kB" #: ../../Xconfigurator_consts.pm_.c:104 msgid "512 kB" msgstr "512 kB" #: ../../Xconfigurator_consts.pm_.c:105 msgid "1 MB" msgstr "1 MB" #: ../../Xconfigurator_consts.pm_.c:106 msgid "2 MB" msgstr "2 MB" #: ../../Xconfigurator_consts.pm_.c:107 msgid "4 MB" msgstr "4 MB" #: ../../Xconfigurator_consts.pm_.c:108 msgid "8 MB" msgstr "8 MB" #: ../../Xconfigurator_consts.pm_.c:109 msgid "16 MB or more" msgstr "16 MB ili više" #: ../../Xconfigurator_consts.pm_.c:114 ../../Xconfigurator_consts.pm_.c:115 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "Standardni VGA, 640x480 na 60 Hz" #: ../../Xconfigurator_consts.pm_.c:116 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Super VGA, 800x600 na 56 Hz" #: ../../Xconfigurator_consts.pm_.c:117 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "8514 kompatibilan, 1024x768 na 87 Hz interlaced (bez 800x600)" #: ../../Xconfigurator_consts.pm_.c:118 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Super VGA, 1024x768 na 87 Hz interlaced, 800x600 na 56 Hz" #: ../../Xconfigurator_consts.pm_.c:119 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz" #: ../../Xconfigurator_consts.pm_.c:120 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz" #: ../../Xconfigurator_consts.pm_.c:121 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "Visoko frekvencijski SVGA, 1024x768 na 70 Hz" #: ../../Xconfigurator_consts.pm_.c:122 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "Multi-frekvencijski - ide do 1280x1024 na 60 Hz" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "Multi-frekvencijski - ide do 1280x1024 na 74 Hz" #: ../../Xconfigurator_consts.pm_.c:124 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "Multi-frekvencijski - ide do 1280x1024 na 76 Hz" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "Monitor ide do 1600x1200 na 70 Hz" #: ../../Xconfigurator_consts.pm_.c:126 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "Monitor ide do 1600x1200 na 76 Hz" #: ../../any.pm_.c:17 msgid "curly" msgstr "curly" #: ../../any.pm_.c:17 msgid "default" msgstr "uobičajeno" #. -PO: names (tie, curly...) have corresponding icons for kdm #: ../../any.pm_.c:17 msgid "tie" msgstr "tie" #: ../../any.pm_.c:18 msgid "brunette" msgstr "crnka" #: ../../any.pm_.c:18 msgid "girl" msgstr "djevojka" #: ../../any.pm_.c:18 msgid "woman-blond" msgstr "plavuša" #: ../../any.pm_.c:19 msgid "automagic" msgstr "automagijski" #: ../../any.pm_.c:60 msgid "First sector of boot partition" msgstr "Prvi sektor boot particije" #: ../../any.pm_.c:60 msgid "First sector of drive (MBR)" msgstr "Prvi sektor pogona (MBR)" #: ../../any.pm_.c:65 msgid "LILO/grub Installation" msgstr "LILO/grub instalacija" #: ../../any.pm_.c:66 msgid "Where do you want to install the bootloader?" msgstr "Gdje želite instalirati bootloader?" #: ../../any.pm_.c:73 msgid "None" msgstr "Niti jedan" #: ../../any.pm_.c:73 msgid "Which bootloader(s) do you want to use?" msgstr "Koji bootloader(e) želite koristiti?" #: ../../any.pm_.c:84 msgid "Boot device" msgstr "Boot uređaj" #: ../../any.pm_.c:85 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (ne radi na starim BIOSima)" #: ../../any.pm_.c:86 msgid "Compact" msgstr "Zbijeno" #: ../../any.pm_.c:86 msgid "compact" msgstr "zbijeno" #: ../../any.pm_.c:87 ../../install_steps_interactive.pm_.c:809 msgid "Delay before booting default image" msgstr "Odgoda prije bootiranja uobičajenog imagea" #: ../../any.pm_.c:88 msgid "Video mode" msgstr "" #: ../../any.pm_.c:90 ../../install_steps_interactive.pm_.c:531 #: ../../install_steps_interactive.pm_.c:654 #: ../../install_steps_interactive.pm_.c:705 #: ../../install_steps_interactive.pm_.c:811 ../../printerdrake.pm_.c:85 #: ../../printerdrake.pm_.c:110 ../../standalone/adduserdrake_.c:42 msgid "Password" msgstr "Lozinka" #: ../../any.pm_.c:91 ../../install_steps_interactive.pm_.c:655 #: ../../install_steps_interactive.pm_.c:706 #: ../../install_steps_interactive.pm_.c:812 #: ../../standalone/adduserdrake_.c:43 msgid "Password (again)" msgstr "Lozinka(provjera)" #: ../../any.pm_.c:92 ../../install_steps_interactive.pm_.c:813 msgid "Restrict command line options" msgstr "Ograničene opcije na komandnoj liniji" #: ../../any.pm_.c:92 ../../install_steps_interactive.pm_.c:813 msgid "restrict" msgstr "ograniči" #: ../../any.pm_.c:98 msgid "Bootloader main options" msgstr "Glavne postavke bootloadera" #: ../../any.pm_.c:101 ../../install_steps_interactive.pm_.c:820 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Postavka ``Ograničene opcije na komandnoj liniji'' nema svrhe ako ne unesete " "lozinku" #: ../../any.pm_.c:102 ../../install_steps_interactive.pm_.c:664 #: ../../install_steps_interactive.pm_.c:719 #: ../../install_steps_interactive.pm_.c:821 #: ../../standalone/adduserdrake_.c:56 msgid "Please try again" msgstr "Molim pokušajte ponovo" #: ../../any.pm_.c:102 ../../install_steps_interactive.pm_.c:664 #: ../../install_steps_interactive.pm_.c:719 #: ../../install_steps_interactive.pm_.c:821 #: ../../standalone/adduserdrake_.c:56 msgid "The passwords do not match" msgstr "Lozinke se ne podudaraju" #: ../../any.pm_.c:112 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" "Ovo su trenutni zapisi.\n" "Možete dodati još koji ili urediti postojeći." #: ../../any.pm_.c:114 ../../install_steps_interactive.pm_.c:832 #: ../../printerdrake.pm_.c:245 ../../standalone/rpmdrake_.c:302 msgid "Add" msgstr "Dodaj" #: ../../any.pm_.c:114 ../../diskdrake.pm_.c:42 #: ../../install_steps_interactive.pm_.c:699 #: ../../install_steps_interactive.pm_.c:832 ../../printerdrake.pm_.c:245 #: ../../standalone/adduserdrake_.c:36 msgid "Done" msgstr "Gotov" #: ../../any.pm_.c:123 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:123 msgid "Other OS (windows...)" msgstr "Drugi OS (Windows...)" #: ../../any.pm_.c:123 msgid "Which type of entry do you want to add?" msgstr "Kakvu vrstu zapisa želite dodati" #: ../../any.pm_.c:142 ../../install_steps_interactive.pm_.c:857 msgid "Image" msgstr "Image" #: ../../any.pm_.c:143 ../../any.pm_.c:151 #: ../../install_steps_interactive.pm_.c:859 msgid "Root" msgstr "Root" #: ../../any.pm_.c:144 ../../install_steps_interactive.pm_.c:860 msgid "Append" msgstr "Dodaj na kraj" #: ../../any.pm_.c:145 ../../install_steps_interactive.pm_.c:861 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:146 ../../install_steps_interactive.pm_.c:862 msgid "Read-write" msgstr "Read-write" #: ../../any.pm_.c:152 msgid "Table" msgstr "Tablica" #: ../../any.pm_.c:153 msgid "Unsafe" msgstr "Nesigurno" #: ../../any.pm_.c:158 ../../install_steps_interactive.pm_.c:869 msgid "Label" msgstr "Oznaka" #: ../../any.pm_.c:160 ../../install_steps_interactive.pm_.c:871 msgid "Default" msgstr "Uobičajeno" #: ../../any.pm_.c:163 ../../install_steps_gtk.pm_.c:674 #: ../../install_steps_interactive.pm_.c:652 #: ../../install_steps_interactive.pm_.c:874 ../../interactive.pm_.c:74 #: ../../interactive.pm_.c:84 ../../interactive.pm_.c:224 #: ../../interactive_newt.pm_.c:49 ../../interactive_newt.pm_.c:98 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:200 #: ../../my_gtk.pm_.c:459 ../../my_gtk.pm_.c:634 ../../printerdrake.pm_.c:272 msgid "Ok" msgstr "U redu" #: ../../any.pm_.c:163 ../../install_steps_interactive.pm_.c:874 msgid "Remove entry" msgstr "Ukloni zapis" #: ../../any.pm_.c:166 ../../install_steps_interactive.pm_.c:877 msgid "Empty label not allowed" msgstr "Prazna oznaka nije dozvoljena" #: ../../any.pm_.c:167 msgid "This label is already used" msgstr "Ova oznaka već postoji" #: ../../diskdrake.pm_.c:18 ../../diskdrake.pm_.c:413 msgid "Create" msgstr "Napravi" #: ../../diskdrake.pm_.c:19 msgid "Unmount" msgstr "Demontiraj" #: ../../diskdrake.pm_.c:20 ../../diskdrake.pm_.c:415 msgid "Delete" msgstr "Obriši" #: ../../diskdrake.pm_.c:20 msgid "Format" msgstr "Formatiraj" #: ../../diskdrake.pm_.c:20 ../../diskdrake.pm_.c:590 msgid "Resize" msgstr "Promijeni veličinu" #: ../../diskdrake.pm_.c:20 ../../diskdrake.pm_.c:413 #: ../../diskdrake.pm_.c:466 msgid "Type" msgstr "Vrsta" #: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:485 msgid "Mount point" msgstr "Točka montiranja" #: ../../diskdrake.pm_.c:35 msgid "Write /etc/fstab" msgstr "Zapiši u /etc/fstab" #: ../../diskdrake.pm_.c:36 msgid "Toggle to expert mode" msgstr "Normalno > Ekspert" #: ../../diskdrake.pm_.c:37 msgid "Toggle to normal mode" msgstr "Ekspert > Normalno" #: ../../diskdrake.pm_.c:38 msgid "Restore from file" msgstr "Vrati postavke iz datoteke" #: ../../diskdrake.pm_.c:39 msgid "Save in file" msgstr "Spremi u datoteku" #: ../../diskdrake.pm_.c:40 msgid "Restore from floppy" msgstr "Vrati postavke sa diskete" #: ../../diskdrake.pm_.c:41 msgid "Save on floppy" msgstr "Spremi na disketu" #: ../../diskdrake.pm_.c:45 msgid "Clear all" msgstr "Očisti sve" #: ../../diskdrake.pm_.c:46 msgid "Format all" msgstr "Formatiraj sve" #: ../../diskdrake.pm_.c:47 msgid "Auto allocate" msgstr "Raspodijeli automatski" #: ../../diskdrake.pm_.c:50 msgid "All primary partitions are used" msgstr "Sve primarne particije su iskorištene" #: ../../diskdrake.pm_.c:50 msgid "I can't add any more partition" msgstr "Ne mogu dodati niti jednu dodatnu particiju" #: ../../diskdrake.pm_.c:50 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Ako želite dodati još koju particiju molim obrišite jednu od particija kako " "bi\n" "mogli stvoriti jednu extended particiju." #: ../../diskdrake.pm_.c:53 msgid "Rescue partition table" msgstr "Vrati particijsku tabelu" #: ../../diskdrake.pm_.c:54 msgid "Undo" msgstr "Vrati" #: ../../diskdrake.pm_.c:55 msgid "Write partition table" msgstr "Zapiši particijsku tabelu" #: ../../diskdrake.pm_.c:56 msgid "Reload" msgstr "Ponovo učitaj" #: ../../diskdrake.pm_.c:96 msgid "loopback" msgstr "loopback" #: ../../diskdrake.pm_.c:109 msgid "Empty" msgstr "Prazno" #: ../../diskdrake.pm_.c:109 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake.pm_.c:109 msgid "FAT" msgstr "FAT" #: ../../diskdrake.pm_.c:109 msgid "Other" msgstr "Ostali" #: ../../diskdrake.pm_.c:109 msgid "Swap" msgstr "Swap (zamjenska memorija)" #: ../../diskdrake.pm_.c:115 msgid "Filesystem types:" msgstr "Vrste datotečnih sustava:" #: ../../diskdrake.pm_.c:124 msgid "Details" msgstr "Detalji" #: ../../diskdrake.pm_.c:138 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Vaš sustav sadrži samo jednu veliku particiju.\n" "(Microsoft DOS/Windows obično koristi jednu particiju).\n" "Preporučam da promijenite veličinu particije\n" "(kliknite prvo na particiju te onda na \"Promijeni veličinu\")" #: ../../diskdrake.pm_.c:143 msgid "Please make a backup of your data first" msgstr "Prvo napravite backup podataka" #: ../../diskdrake.pm_.c:143 ../../diskdrake.pm_.c:160 #: ../../diskdrake.pm_.c:169 ../../diskdrake.pm_.c:517 #: ../../diskdrake.pm_.c:546 msgid "Read carefully!" msgstr "Pročitajte pažljivo!" #: ../../diskdrake.pm_.c:146 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" #: ../../diskdrake.pm_.c:160 msgid "Be careful: this operation is dangerous." msgstr "Budite oprezni ova operacija je opasna" #: ../../diskdrake.pm_.c:197 ../../install_any.pm_.c:330 #: ../../install_steps.pm_.c:74 ../../install_steps_interactive.pm_.c:40 #: ../../standalone/diskdrake_.c:60 ../../standalone/rpmdrake_.c:294 #: ../../standalone/rpmdrake_.c:304 msgid "Error" msgstr "Greška" #: ../../diskdrake.pm_.c:221 ../../diskdrake.pm_.c:680 msgid "Mount point: " msgstr "Mjesto montiranja:" #: ../../diskdrake.pm_.c:222 ../../diskdrake.pm_.c:263 msgid "Device: " msgstr "Uređaj:" #: ../../diskdrake.pm_.c:223 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS drive slovo: %s (nagađanje)\n" #: ../../diskdrake.pm_.c:224 ../../diskdrake.pm_.c:266 msgid "Type: " msgstr "Vrsta: " #: ../../diskdrake.pm_.c:225 #, c-format msgid "Start: sector %s\n" msgstr "Početak: sektor %s\n" #: ../../diskdrake.pm_.c:226 #, c-format msgid "Size: %d MB" msgstr "Veličina: %d MB" #: ../../diskdrake.pm_.c:228 #, c-format msgid ", %s sectors" msgstr ", %s sektora" #: ../../diskdrake.pm_.c:230 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "Cilindar %d do cilindra %d\n" #: ../../diskdrake.pm_.c:231 msgid "Formatted\n" msgstr "Formatiran\n" #: ../../diskdrake.pm_.c:232 msgid "Not formatted\n" msgstr "Nije formatiran\n" #: ../../diskdrake.pm_.c:233 msgid "Mounted\n" msgstr "Montiran\n" #: ../../diskdrake.pm_.c:234 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake.pm_.c:235 #, c-format msgid "Loopback file(s): %s\n" msgstr "Loopback datoteka(e): %s\n" #: ../../diskdrake.pm_.c:236 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Podrazumijevana boot particija\n" " (za MS-DOS boot, ne za LILO)\n" #: ../../diskdrake.pm_.c:238 #, c-format msgid "Level %s\n" msgstr "" #: ../../diskdrake.pm_.c:239 #, c-format msgid "Chunk size %s\n" msgstr "Chunk veličina %s\n" #: ../../diskdrake.pm_.c:240 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diskovi %s\n" #: ../../diskdrake.pm_.c:242 #, c-format msgid "Loopback file name: %s" msgstr "Ime loopback datoteke: %s" #: ../../diskdrake.pm_.c:259 msgid "Please click on a partition" msgstr "Molim kliknite na particiju" #: ../../diskdrake.pm_.c:264 #, c-format msgid "Size: %d MB\n" msgstr "Veličina: %d MB\n" #: ../../diskdrake.pm_.c:265 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometry: %s cilindara, %s glava, %s sektora\n" #: ../../diskdrake.pm_.c:267 #, c-format msgid "Partition table type: %s\n" msgstr "Vrsta particijske tabele: %s\n" #: ../../diskdrake.pm_.c:268 #, c-format msgid "on bus %d id %d\n" msgstr "na sabirnici %d id %d\n" #: ../../diskdrake.pm_.c:281 msgid "Mount" msgstr "Montiraj" #: ../../diskdrake.pm_.c:282 msgid "Active" msgstr "Aktivno" #: ../../diskdrake.pm_.c:283 msgid "Add to RAID" msgstr "Dodaj RAID-u" #: ../../diskdrake.pm_.c:284 msgid "Remove from RAID" msgstr "Ukloni sa RAID-a" #: ../../diskdrake.pm_.c:285 msgid "Modify RAID" msgstr "Promijeni RAID" #: ../../diskdrake.pm_.c:286 msgid "Use for loopback" msgstr "Koristi za loopback" #: ../../diskdrake.pm_.c:293 msgid "Choose action" msgstr "Izaberite akciju" #: ../../diskdrake.pm_.c:386 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "Žalim međutim ne mogu napraviti /boot toliko daleko na disku\n" "(cilindar > 1024).\n" "Imate dvije opcije ili će te koristiti LILO pa neće raditi ili neće te\n" "koristiti LILO pa vam /boot neće ni trebati." #: ../../diskdrake.pm_.c:390 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../../diskdrake.pm_.c:396 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition if you want to use lilo or grub" msgstr "" #: ../../diskdrake.pm_.c:413 ../../diskdrake.pm_.c:415 #, c-format msgid "Use ``%s'' instead" msgstr "Umjesto toga koristi ``%s''" #: ../../diskdrake.pm_.c:418 msgid "Use ``Unmount'' first" msgstr "Prvo pritisnite ``Demontiraj''" #: ../../diskdrake.pm_.c:419 ../../diskdrake.pm_.c:461 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti će " "obrisani" #: ../../diskdrake.pm_.c:431 msgid "Continue anyway?" msgstr "Da ipak nastavim?" #: ../../diskdrake.pm_.c:436 msgid "Quit without saving" msgstr "Da završim bez spremanja" #: ../../diskdrake.pm_.c:436 msgid "Quit without writing the partition table?" msgstr "Da završim bez zapisivanje particijske tablice?" #: ../../diskdrake.pm_.c:464 msgid "Change partition type" msgstr "Mijenjam tip particije" #: ../../diskdrake.pm_.c:465 msgid "Which partition type do you want?" msgstr "Koji tip particije želite?" #: ../../diskdrake.pm_.c:483 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "Gdje želite montirati loopback datoteku %s?" #: ../../diskdrake.pm_.c:484 #, c-format msgid "Where do you want to mount device %s?" msgstr "Gdje želite montirati uređaj %s?" #: ../../diskdrake.pm_.c:489 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../diskdrake.pm_.c:508 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Nakon formatiranja particije %s svi podaci na ovoj particiji biti će obrisani" #: ../../diskdrake.pm_.c:510 msgid "Formatting" msgstr "Formatiram" #: ../../diskdrake.pm_.c:511 #, c-format msgid "Formatting loopback file %s" msgstr "Formatiram loopback datoteku %s" #: ../../diskdrake.pm_.c:512 ../../install_steps_interactive.pm_.c:253 #, c-format msgid "Formatting partition %s" msgstr "Formatiram particiju %s" #: ../../diskdrake.pm_.c:517 msgid "After formatting all partitions," msgstr "Poslije formatiranja svih particija," #: ../../diskdrake.pm_.c:517 msgid "all data on these partitions will be lost" msgstr "svi podaci na ovim particijama biti će izgubljeni" #: ../../diskdrake.pm_.c:527 msgid "Move" msgstr "Premjesti" #: ../../diskdrake.pm_.c:528 msgid "Which disk do you want to move it to?" msgstr "Na koji disk se želite premjestiti?" #: ../../diskdrake.pm_.c:532 msgid "Sector" msgstr "Sektor" #: ../../diskdrake.pm_.c:533 msgid "Which sector do you want to move it to?" msgstr "Na koji se sektor želite premjestiti?" #: ../../diskdrake.pm_.c:536 msgid "Moving" msgstr "Premještam" #: ../../diskdrake.pm_.c:536 msgid "Moving partition..." msgstr "Premještam particiju..." #: ../../diskdrake.pm_.c:546 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Particijska tablica pogona %s će sada biti zapisana na disk!" #: ../../diskdrake.pm_.c:548 msgid "You'll need to reboot before the modification can take place" msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne" #: ../../diskdrake.pm_.c:569 ../../install_steps_gtk.pm_.c:208 msgid "Computing FAT filesystem bounds" msgstr "Izračunavam granice fat datotečnog sustava" #: ../../diskdrake.pm_.c:569 ../../diskdrake.pm_.c:618 #: ../../install_steps_gtk.pm_.c:208 msgid "Resizing" msgstr "Mijenjam veličinu" # #: ../../diskdrake.pm_.c:585 msgid "All data on this partition should be backed-up" msgstr "Preporučam da prvo backupirate sve podatke s ove particije" #: ../../diskdrake.pm_.c:587 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Nakon mijenjanja veličine particije %s svi podaci na ovoj particiji biti će " "izgubljeni" #: ../../diskdrake.pm_.c:597 msgid "Choose the new size" msgstr "Odaberite novu veličinu" #: ../../diskdrake.pm_.c:597 ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 msgid "MB" msgstr "MB" #: ../../diskdrake.pm_.c:652 msgid "Create a new partition" msgstr "Stvori novu particiju" #: ../../diskdrake.pm_.c:672 msgid "Start sector: " msgstr "Početni sektor:" #: ../../diskdrake.pm_.c:676 ../../diskdrake.pm_.c:750 msgid "Size in MB: " msgstr "Veličina u MB:" #: ../../diskdrake.pm_.c:679 ../../diskdrake.pm_.c:753 msgid "Filesystem type: " msgstr "Vrsta datotečnog sustava:" #: ../../diskdrake.pm_.c:682 msgid "Preference: " msgstr "Postavke:" #: ../../diskdrake.pm_.c:729 ../../install_steps.pm_.c:132 msgid "This partition can't be used for loopback" msgstr "Ova particija se ne može koristiti za loopback" #: ../../diskdrake.pm_.c:739 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake.pm_.c:749 msgid "Loopback file name: " msgstr "Ime loopback datoteke:" #: ../../diskdrake.pm_.c:775 msgid "File already used by another loopback, choose another one" msgstr "" "Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku" #: ../../diskdrake.pm_.c:776 msgid "File already exists. Use it?" msgstr "Datoteka već postoji. Da li da nju upotrijebim?" #: ../../diskdrake.pm_.c:798 ../../diskdrake.pm_.c:814 msgid "Select file" msgstr "Odaberite datoteku" #: ../../diskdrake.pm_.c:807 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Backup particijske tablice nema istu veličinu\n" "Da ipak nastavim?" #: ../../diskdrake.pm_.c:815 msgid "Warning" msgstr "Upozorenje" #: ../../diskdrake.pm_.c:816 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Umetnite disketu u pogon\n" "Svi podaci na disketi biti će izbrisani" #: ../../diskdrake.pm_.c:830 msgid "Trying to rescue partition table" msgstr "Pokušavam spasiti particijsku tablicu" #: ../../diskdrake.pm_.c:841 msgid "device" msgstr "uređaj" #: ../../diskdrake.pm_.c:842 msgid "level" msgstr "" #: ../../diskdrake.pm_.c:843 msgid "chunk size" msgstr "chunk veličina" #: ../../diskdrake.pm_.c:855 msgid "Choose an existing RAID to add to" msgstr "Izaberite postojeći RAID na koji želite dodati " #: ../../diskdrake.pm_.c:856 msgid "new" msgstr "novi" #: ../../fs.pm_.c:85 ../../fs.pm_.c:91 ../../fs.pm_.c:97 ../../fs.pm_.c:103 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatiranje %s nije uspjelo" #: ../../fs.pm_.c:129 #, c-format msgid "I don't know how to format %s in type %s" msgstr "ne znam kako formatirati %s kao vrstu %s" #: ../../fs.pm_.c:186 msgid "nfs mount failed" msgstr "nfs montiranje nije uspjelo" #: ../../fs.pm_.c:209 msgid "mount failed: " msgstr "montiranje nije uspjelo:" #: ../../fs.pm_.c:220 #, c-format msgid "error unmounting %s: %s" msgstr "greška kod demontiranja %s: %s" #: ../../fsedit.pm_.c:250 msgid "Mount points must begin with a leading /" msgstr "Mjesto montiranja mora početi sa /" #: ../../fsedit.pm_.c:253 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Već postoji particija sa mjestom montiranja %s\n" #: ../../fsedit.pm_.c:261 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../fsedit.pm_.c:273 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" "Treba vam istinski datotečni sustav (ex2, reiserfs) za ovo mjesto " "monitranja\n" #: ../../fsedit.pm_.c:355 #, c-format msgid "Error opening %s for writing: %s" msgstr "Greška prilikom otvaranja %s za pisanje: %s" #: ../../fsedit.pm_.c:437 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Pojavila se greška - ne mogu pronaći niti jedan valjani uređaj na kojem\n" "bih mogao instalirati datotečni sustav. Provjerite da li je sa vašim " "hardverom sve u redu." #: ../../fsedit.pm_.c:452 msgid "You don't have any partitions!" msgstr "Nemate niti jednu particiju!" #: ../../help.pm_.c:7 msgid "Choose preferred language for install and system usage." msgstr "Izaberite preferirani jezik za instalaciju i korištenje sustava." #: ../../help.pm_.c:10 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "" "Izaberite raspored tipkovnice koji se podudara sa vašom na gornjem popisu" #: ../../help.pm_.c:13 msgid "" "Choose \"Install\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "Choose \"Upgrade\" if you wish to update a previous version of Mandrake " "Linux:\n" "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold " "2000\n" "or 7.0 (Air).\n" "\n" "\n" "Select:\n" "\n" " - Automated (recommended): If you have never installed Linux before, " "choose this. NOTE:\n" " networking will not be configured during installation, use " "\"LinuxConf\"\n" " to configure it after the install completes.\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!\n" msgstr "" "Izaberite \"Instaliraj\" ukoliko nemate Linux instaliran ili ako\n" "želite imati više različitih distribucija ili inačica Linux na sustavu.\n" "\n" "Izaberite \"Nadogradi\" ako želite nadograditi postojeću inačicu Mandrake\n" "Linuxa: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus)\n" "6.1 (Helios), Gold 2000 or 7.0 (Air).\n" "\n" "\n" "Odaberite:\n" "\n" " - Automatski: Ukoliko nikada niste instalirali Linux.\n" "\n" " - Prilagođeno: Ukoliko vam je Linux poznat korištenjem ove\n" "opcije moći će te odabrati kakvu instalaciju želite npr. normalna, " "programer\n" "ili poslužitelj. Odaberite \"Normalna\" za sustav opće namjene.\n" "Odaberite \"Programer\" ako želite koristiti računalo primarno za razvoj\n" "softvera ili odaberite \"Poslužitelj\" ako želite koristiti računalo kao\n" "poslužitelj opće namjene npr. za mail, web, ispisivanje itd.\n" "\n" " - Stručnjak: Ukoliko ste vrlo dobro upoznati sa Linuxom i želite\n" "imati potpunu kontrolu nad instalacijom Linuxa odaberite opciju\n" "\"Prilagođeno\".\n" #: ../../help.pm_.c:37 msgid "" "Select:\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!\n" msgstr "" "Odaberite:\n" "\n" " - Prilagođeno: Ukoliko vam je Linux poznat korištenjem ove\n" "opcije moći će te odabrati kakvu instalaciju želite npr. normalna, " "programer\n" "ili poslužitelj. Odaberite \"Normalna\" za sustav opće namjene.\n" "Odaberite \"Programer\" ako želite koristiti računalo primarno za razvoj\n" "softvera ili odaberite \"Poslužitelj\" ako želite koristiti računalo kao\n" "poslužitelj opće namjene npr. za mail, web, ispisivanje itd.\n" "\n" "\n" " - Stručnjak: Ukoliko ste vrlo dobro upoznati sa Linuxom i želite\n" "imati potpunu kontrolu nad instalacijom Linuxa odaberite opciju\n" "\"Prilagođeno\".\n" #: ../../help.pm_.c:49 msgid "" "The different choices for your machine's usage (provided, hence, that you " "have\n" "chosen either \"Custom\" or \"Expert\" as an installation class) are the\n" "following:\n" "\n" " - Normal: choose this if you intend to use your machine primarily for\n" " everyday use (office work, graphics manipulation and so on). Do not\n" " expect any compiler, development utility et al. installed.\n" "\n" " - Development: as its name says. Choose this if you intend to use your\n" " machine primarily for software development. You will then have a " "complete\n" " collection of software installed in order to compile, debug and format\n" " source code, or create software packages.\n" "\n" " - Server: choose this if the machine which you're installing " "Linux-Mandrake\n" " on is intended to be used as a server. Either a file server (NFS or " "SMB),\n" " a print server (Unix' lp (Line Printer) protocol or Windows style SMB\n" " printing), an authentication server (NIS), a database server and so on. " "As\n" " such, do not expect any gimmicks (KDE, GNOME...) to be installed.\n" msgstr "" #: ../../help.pm_.c:70 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "\n" "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" "doesn't know which driver to use for this card, or if you have no\n" "SCSI adapters at all, you will then be prompted on whether you have\n" "one or not. If you have none, answer \"No\". If you have one or more,\n" "answer \"Yes\". A list of drivers will then pop up, from which you\n" "will have to select one.\n" "\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from your documentation or from Windows (if you have it\n" "on your system), as suggested by the installation guide. These\n" "are the options you will need to provide to the driver." msgstr "" #: ../../help.pm_.c:94 msgid "" "At this point, you may choose what partition(s) to use to install\n" "your Linux-Mandrake system if they have been already defined (from a\n" "previous install of Linux or from another partitionning tool). In other\n" "cases, hard drive partitions must be defined. This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "If you have to create new partitions, use \"Auto allocate\" to " "automatically\n" "create partitions for Linux. You can select the disk for partitionning by\n" "clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced user. DiskDrake\n" "simplifies the process so that it must not be. Consult the documentation\n" "and take your time before proceeding.\n" "\n" "\n" "You can reach any option using the keyboard: navigate through the " "partitions\n" "using Tab and Up/Down arrows. When a partition is selected, you can use:\n" "\n" "- Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" "- Ctrl-d to delete a partition\n" "\n" "- Ctrl-m to set the mount point\n" msgstr "" #: ../../help.pm_.c:131 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" "Sve novo definirane particije moraju biti formatirane za\n" "uporabu tj. moraju imati ispravni datotečni sustav. Također ukoliko\n" "želite obrisati podatke s određene particije odaberite reformatiranje.\n" "Opaska: nije potrebno reformatirati postojeće particije osobito\n" "ako sadrže datoteke ili podatke koje želite sačuvati.\n" "Na primjer obično /home i /usr/local sadrže podatke koje treba sačuvati." #: ../../help.pm_.c:139 msgid "" "You may now select the group of packages you wish to\n" "install or upgrade.\n" "\n" "DrakX will then check whether you have enough room to install them all. If " "not,\n" "it will warn you about it. If you want to go on anyway, it will proceed " "onto\n" "the installation of all selected groups but will drop some packages of " "lesser\n" "interest. At the bottom of the list you can select the option\n" "\"Individual package selection\"; in this case you will have to browse\n" "through more than 1000 packages..." msgstr "" #: ../../help.pm_.c:150 msgid "" "If you have all the CDs in the list above, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../help.pm_.c:155 msgid "" "The packages selected are now being installed. This operation\n" "should take a few minutes unless you have chosen to upgrade an\n" "existing system, in that case it can take more time even before\n" "upgrade starts." msgstr "" "Počela je instalacija paketa koje ste odabrali. Ova\n" "operacija će potrajati par minuta osim ako ste odabrali\n" "nadogradnju postojećeg sustava. U tom slučaju instalacija\n" "će izvršiti određene provjere prije same nadogradnje." #: ../../help.pm_.c:161 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX' settings, just jump to the section\n" "you want by clicking on it in the menu on the left. Otherwise,\n" "choose a mouse type in the menu which you think is the closest\n" "match for your mouse.\n" "\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" #: ../../help.pm_.c:176 msgid "" "Please select the correct port. For example, the COM1 port under MS Windows\n" "is named ttyS0 under Linux." msgstr "" "Molim odaberite ispravni port. Npr. COM1 port u Windows-ima\n" "je ttyS0 u Linuxima, COM2 ttyS1 itd." #: ../../help.pm_.c:180 msgid "" "This section is dedicated to configuring a local area\n" "network (LAN) or a modem.\n" "\n" "Choose \"Local LAN\" and DrakX will\n" "try to find an Ethernet adapter on your machine. PCI adapters\n" "should be found and initialized automatically.\n" "However, if your peripheral is ISA, autodetection will not work,\n" "and you will have to choose a driver from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from documentation of your\n" "hardware.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses.\n" "\n" "\n" "Choose \"Dialup with modem\" and the Internet connection with\n" "a modem will be configured. DrakX will try to find your modem,\n" "if it fails you will have to select the right serial port where\n" "your modem is connected to." msgstr "" #: ../../help.pm_.c:210 msgid "" "Enter:\n" "\n" " - IP address: if you don't know it, ask your network administrator or " "ISP.\n" "\n" "\n" " - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n" "sure, ask your network administrator or ISP.\n" "\n" "\n" " - Automatic IP: If your network uses bootp or dhcp protocol, select \n" "this option. If selected, no value is needed in \"IP address\". If you are\n" "not sure, ask your network administrator or ISP.\n" msgstr "" "Unesite::\n" "\n" " - IP adresu: ukoliko ne znate adresu pitajte svojeg mrežnog " "administratora\n" "ili ISP-a.\n" "\n" "\n" " - Mrežna maska: Obično je maska \"255.255.255.0\". Ako niste sigurni \n" "raspitajte se kod mrežnog administratora ili ISP-a.\n" "\n" "\n" " - Automatski IP: Ukoliko vaša mreža koristi bootp ili dhcp odaberite ovu\n" "opciju. U ovom slučaju ne morate unijeti ništa pod \"IP adresa\". Ako niste " "sigurni\n" "raspitajte se kod mrežnog administratora ili ISP-a.\n" #: ../../help.pm_.c:225 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" "Sada možete podesiti dial-up postavke. Ako niste sigurni što treba\n" "unijeti, raspitajte se kod svog ISP-a." #: ../../help.pm_.c:229 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you should use proxies, ask your network administrator or your ISP." msgstr "" "Ako želite koristiti proxye unesite ih sada. Ako niste sigurni\n" "da li imate proxye raspitajte se kod mrežnog administratora ili ISP-a." #: ../../help.pm_.c:233 msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" "Sada možete instalirati kriptografske pakete ukoliko imate dobro podešenu " "internetu vezu.\n" "Prvo morate odabrati mirror sa kojeg će te skinuti pakete\n" "\n" "Nakon toga moći će te odabrati koje pakete želite instalirati.\n" "Opaska: Morate odabrati mirror i kriptografske pakete ovisno\n" "o zakonima zemlje u kojoj se nalazite." #: ../../help.pm_.c:241 msgid "" "You can now select your timezone according to where you live.\n" "\n" "\n" "Linux manages time in GMT or \"Greenwich Mean Time\" and translates it\n" "in local time according to the time zone you have selected." msgstr "" "Sada možete odabrati vremensku zonu u kojoj živite.\n" "\n" "\n" "Linux koristi GMT (Greenwich Mean Time) koje onda preračunava\n" "u vrijeme u vašoj vremenskoj zoni. " #: ../../help.pm_.c:248 msgid "" "You may now choose which services you want to see started at boot time.\n" "When your mouse comes over an item, a small balloon help will popup which\n" "describes the role of the service.\n" "\n" "Be especially careful in this step if you intend to use your machine as a\n" "server: you will probably want not to start any services which you don't\n" "want." msgstr "" #: ../../help.pm_.c:257 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup. Note however that the print\n" "spooler uses 'lp' as the default printer name; so you\n" "must have one printer with such a name; but you can give\n" "several names, separated by '|' characters, to a printer.\n" "So, if you prefer to have a more meaningful name you just have\n" "to put it first, eg: \"My Printer|lp\".\n" "The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" "\n" "If your printer is physically connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../../help.pm_.c:286 msgid "" "You can now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should NEVER be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../../help.pm_.c:302 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" "Ako želite dodatnu sigurnost na sustavu odaberite \"Koristi shadow " "datoteku\" i\n" "\"Koristi MD5 lozinke\"." #: ../../help.pm_.c:306 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" "Ukoliko vaša mreža koristi NIS odaberite \"Koristi NIS\". Ako niste sigurni\n" "raspitajte se kod svog mrežnog administratora." #: ../../help.pm_.c:310 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" #: ../../help.pm_.c:329 msgid "" "It is strongly recommended that you answer \"Yes\" here. If you install\n" "Microsoft Windows at a later date it will overwrite the boot sector.\n" "Unless you have made a bootdisk as suggested, you will not be able to\n" "boot into Linux any more." msgstr "" #: ../../help.pm_.c:335 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" "Sada možete odabrati gdje želite\n" "staviti informacije potrebne za bootiranje Linuxa.\n" "\n" "\n" "Ako ne znate što odabrati odaberite \"Prvi sektor \n" "diska (MBR)\"." #: ../../help.pm_.c:343 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" " (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" #: ../../help.pm_.c:347 msgid "" "LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" "either Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" #: ../../help.pm_.c:359 msgid "" "LILO and grub main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" " * normal: select normal 80x25 text mode.\n" " * : use the corresponding text mode." msgstr "" #: ../../help.pm_.c:378 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" #: ../../help.pm_.c:391 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "" "Ukoliko je X pogrešno podešen korištenjem ovih opcija možete\n" "ispravno podesiti X Window sustav." #: ../../help.pm_.c:395 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" "Ukoliko preferirate grafičku prijavu odaberite \"Da\". U protivnom, " "odaberite \"Ne\"." #: ../../help.pm_.c:399 msgid "" "You can now select some miscellaneous options for your system.\n" "\n" " - Use hard drive optimizations: this option can improve hard disk " "performance\n" " but is only for advanced users: some buggy chipsets can ruin your data, " "so\n" " beware. Note that the kernel has a builtin blacklist of drives and\n" " chipsets, but if you want to avoid bad surprises, leave this option " "unset.\n" "\n" " - Choose security level: you can choose a security level for your\n" " system. Please refer to the manual for complete information. Basically: " "if\n" " you don't know, select \"Medium\" ; if you really want to have a secure\n" " machine, choose \"Paranoid\" but beware: IN THIS LEVEL, ROOT LOGIN AT\n" " CONSOLE IS NOT ALLOWED! If you want to be root, you have to login as a " "user\n" " and then use \"su\". More generally, do not expect to use your machine\n" " for anything but as a server. You have been warned.\n" "\n" " - Precise RAM size if needed: unfortunately, in today's PC world, there is " "no\n" " standard method to ask the BIOS about the amount of RAM present in your\n" " computer. As a consequence, Linux may fail to detect your amount of RAM\n" " correctly. If this is the case, you can specify the correct amount of " "RAM\n" " here. Note that a difference of 2 or 4 MB is normal.\n" "\n" " - Removable media automounting: if you would prefer not to manually\n" " mount removable media (CD-ROM, Floppy, Zip) by typing \"mount\" and\n" " \"umount\", select this option. \n" "\n" " - Enable NumLock at startup: if you want NumLock enabled after booting,\n" " select this option (Note: NumLock may or may not work under X)." msgstr "" #: ../../help.pm_.c:428 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" "Vaš sustav će sada rebootirati.\n" "\n" "Nakon reboot-a vaš novi Linux Mandrake sustav će se automatski učitati.\n" "Ukoliko želite bootirati neki drugi postojeći operativni sustav molim " "pročitajte\n" "dodatne upute." #: ../../install2.pm_.c:43 msgid "Choose your language" msgstr "Odaberite jezik" #: ../../install2.pm_.c:44 msgid "Select installation class" msgstr "Odaberite razred instalacije" #: ../../install2.pm_.c:45 msgid "Hard drive detection" msgstr "Otkrivanje hard diskova" #: ../../install2.pm_.c:46 msgid "Configure mouse" msgstr "Podesi miš" #: ../../install2.pm_.c:47 msgid "Choose your keyboard" msgstr "Odaberite tipkovnicu" #: ../../install2.pm_.c:48 ../../install_steps_interactive.pm_.c:318 msgid "Miscellaneous" msgstr "Razno" #: ../../install2.pm_.c:49 msgid "Setup filesystems" msgstr "Podesi datotečne sustave" #: ../../install2.pm_.c:50 msgid "Format partitions" msgstr "Formatiraj particije" #: ../../install2.pm_.c:51 msgid "Choose packages to install" msgstr "Izabir instaliranih paketa" #: ../../install2.pm_.c:52 msgid "Install system" msgstr "Instaliraj sustav" #: ../../install2.pm_.c:53 msgid "Configure networking" msgstr "Podesi mrežu" #: ../../install2.pm_.c:54 msgid "Cryptographic" msgstr "Kriptografski" #: ../../install2.pm_.c:55 msgid "Configure timezone" msgstr "Podesi vremensku zonu" #: ../../install2.pm_.c:56 msgid "Configure services" msgstr "Podešavanje servisa" #: ../../install2.pm_.c:57 msgid "Configure printer" msgstr "Podesi pisač" #: ../../install2.pm_.c:58 ../../install_steps_interactive.pm_.c:652 #: ../../install_steps_interactive.pm_.c:653 msgid "Set root password" msgstr "Podešavanje root lozinke" #: ../../install2.pm_.c:59 msgid "Add a user" msgstr "Dodaj korisnika" #: ../../install2.pm_.c:61 msgid "Create a bootdisk" msgstr "Napravi boot disketu" #: ../../install2.pm_.c:63 msgid "Install bootloader" msgstr "Instaliraj bootloader" #: ../../install2.pm_.c:64 msgid "Configure X" msgstr "Podesi X" #: ../../install2.pm_.c:65 msgid "Auto install floppy" msgstr "" #: ../../install2.pm_.c:66 msgid "Exit install" msgstr "Izađi iz instalacije" #: ../../install2.pm_.c:308 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Morate imati root particiju.\n" "Prvo napravite particiju (ili kliknite na postojeću) te\n" "odaberite akciju ``Mjesto monitranja'' te odaberite `/'" #: ../../install_any.pm_.c:331 ../../standalone/diskdrake_.c:61 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../../install_any.pm_.c:348 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake nije uspio pročitati vašu particijsku tablice.\n" "Nastavite o vlastitoj odgovornosti." #: ../../install_any.pm_.c:370 msgid "Searching root partition." msgstr "Tražim root particiju." #: ../../install_any.pm_.c:399 msgid "Information" msgstr "Informacije" #: ../../install_any.pm_.c:400 #, c-format msgid "%s: This is not a root partition, please select another one." msgstr "%s: Ovo nije root particija, molim odaberite drugu." #: ../../install_any.pm_.c:402 msgid "No root partition found" msgstr "Niti jedna root particija nije pronađena" #: ../../install_any.pm_.c:440 msgid "Can't use broadcast with no NIS domain" msgstr "Ne mogu koristiti broadcast bez NIS domene" #: ../../install_any.pm_.c:603 msgid "Error reading file $f" msgstr "Greška prilikom čitanja datoteke $f" #: ../../install_steps.pm_.c:75 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps.pm_.c:174 #, c-format msgid "Duplicate mount point %s" msgstr "Dupliciraj mjesto monitranja %s" #: ../../install_steps.pm_.c:318 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" msgstr "" #: ../../install_steps.pm_.c:385 #, c-format msgid "Welcome to %s" msgstr "Dobrodošli u %s" #: ../../install_steps.pm_.c:737 msgid "No floppy drive available" msgstr "Disketni pogon nije dostupan" #: ../../install_steps_auto_install.pm_.c:18 ../../install_steps_gtk.pm_.c:125 #: ../../install_steps_stdio.pm_.c:26 #, c-format msgid "Entering step `%s'\n" msgstr "Pokrećem korak `%s'\n" #: ../../install_steps_graphical.pm_.c:259 ../../install_steps_gtk.pm_.c:249 msgid "You must have a swap partition" msgstr "Morate imati swap particiju" #: ../../install_steps_graphical.pm_.c:261 ../../install_steps_gtk.pm_.c:251 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" "Swap particija ne postoji\n" "\n" "Da ipak nastavim?" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "Izaberite veličinu koji želite instalirati" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "Ukupna veličina:" #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:447 #: ../../standalone/rpmdrake_.c:136 #, c-format msgid "Version: %s\n" msgstr "Inačica: %s\n" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:448 #: ../../standalone/rpmdrake_.c:137 #, c-format msgid "Size: %d KB\n" msgstr "Veličina: %d KB\n" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:360 msgid "Choose the packages you want to install" msgstr "Odaberite pakete koje želite instalirati" #: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:363 msgid "Info" msgstr "Info" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:368 #: ../../install_steps_interactive.pm_.c:129 ../../standalone/rpmdrake_.c:161 msgid "Install" msgstr "Instaliraj" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:533 #: ../../install_steps_interactive.pm_.c:382 msgid "Installing" msgstr "Instaliram" #: ../../install_steps_graphical.pm_.c:499 ../../install_steps_gtk.pm_.c:539 msgid "Please wait, " msgstr "Molim pričekajte," #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:541 msgid "Time remaining " msgstr "Preostalo vrijeme" #: ../../install_steps_graphical.pm_.c:502 ../../install_steps_gtk.pm_.c:542 msgid "Total time " msgstr "Ukupno vrijeme" #: ../../install_steps_graphical.pm_.c:507 ../../install_steps_gtk.pm_.c:551 #: ../../install_steps_interactive.pm_.c:382 msgid "Preparing installation" msgstr "Pripremam instalaciju" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:566 #, c-format msgid "Installing package %s" msgstr "Instaliram paket %s" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:607 #: ../../install_steps_gtk.pm_.c:611 msgid "Go on anyway?" msgstr "Da ipak nastavim?" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:607 msgid "There was an error ordering packages:" msgstr "" #: ../../install_steps_graphical.pm_.c:577 #: ../../install_steps_interactive.pm_.c:997 msgid "Use existing configuration for X11?" msgstr "Da koristim postojeću postavu X11?" #: ../../install_steps_gtk.pm_.c:154 msgid "Please, choose one of the following classes of installation:" msgstr "" #: ../../install_steps_gtk.pm_.c:195 msgid "You don't have any windows partitions!" msgstr "Nemate niti jednu Windows particiju!" #: ../../install_steps_gtk.pm_.c:197 msgid "You don't have any enough room for Lnx4win" msgstr "Nemate dovoljno mjesta za Lnx4win" #: ../../install_steps_gtk.pm_.c:213 msgid "" "WARNING!\n" "\n" "DrakX now needs to resize your Windows partition. Be careful: this operation " "is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "UPOZORENJE!\n" "\n" "DrakX sada mora promijeniti veličinu vaše Windows particije\n" "Budite vrlo oprezni budući da je ova operacija\n" "izuzetno opasna. Ukoliko još niste mijenjali veličinu particije molim\n" "pokrenite scandisk (a preporučam i defrag) i provjerite particiju koju\n" "želite mijenjati. Također preporučljivo je da backupirati sve podatke sa " "Windows particije.\n" "Kada ste sigurni da želite nastaviti, pritisnite U redu." #: ../../install_steps_gtk.pm_.c:232 msgid "Automatic resizing failed" msgstr "Automatsko mijenjanje veličine nije uspjelo" #: ../../install_steps_gtk.pm_.c:261 msgid "Which partition do you want to use to put Linux4Win?" msgstr "Koju particiju želite smjestiti Linux4Win?" #: ../../install_steps_gtk.pm_.c:280 msgid "Choose the sizes" msgstr "Odaberite veličinu" #: ../../install_steps_gtk.pm_.c:282 msgid "Root partition size in MB: " msgstr "Veličina korijenske particije u MB: " #: ../../install_steps_gtk.pm_.c:284 msgid "Swap partition size in MB: " msgstr "Veličina swap particiju u MB: " #: ../../install_steps_gtk.pm_.c:316 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "Ukupna veličina izabranih grupa je otprilike %d MB.\n" #: ../../install_steps_gtk.pm_.c:318 msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" #: ../../install_steps_gtk.pm_.c:323 msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" #: ../../install_steps_gtk.pm_.c:329 msgid "You will be able to choose them more specifically in the next step." msgstr "Detaljniji izbor nalazi se u slijedećem koraku." #: ../../install_steps_gtk.pm_.c:331 msgid "Percentage of packages to install" msgstr "Odaberite postotak paketa koje želite instalirati" #: ../../install_steps_gtk.pm_.c:372 msgid "Automatic dependencies" msgstr "Automatski odabir ovisnosti" #: ../../install_steps_gtk.pm_.c:425 ../../standalone/rpmdrake_.c:101 msgid "Expand Tree" msgstr "Proširi stablo" #: ../../install_steps_gtk.pm_.c:426 ../../standalone/rpmdrake_.c:102 msgid "Collapse Tree" msgstr "Sažmi stablo" #: ../../install_steps_gtk.pm_.c:427 msgid "Toggle between flat and group sorted" msgstr "" #: ../../install_steps_gtk.pm_.c:445 msgid "Bad package" msgstr "Loš paket" #: ../../install_steps_gtk.pm_.c:446 #, c-format msgid "Name: %s\n" msgstr "Ime: %s\n" #: ../../install_steps_gtk.pm_.c:449 #, c-format msgid "Importance: %s\n" msgstr "Značaj: %s\n" #: ../../install_steps_gtk.pm_.c:457 #, c-format msgid "Total size: %d / %d MB" msgstr "Ukupna veličina: %d / %d MB" #: ../../install_steps_gtk.pm_.c:467 msgid "This is a mandatory package, it can't be unselected" msgstr "Budući da je ovo obvezni paket ne možete ga odznačiti" #: ../../install_steps_gtk.pm_.c:469 msgid "You can't unselect this package. It is already installed" msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran" #: ../../install_steps_gtk.pm_.c:473 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" "Ovaj paket treba nadograditi\n" "Da li ste sigurni da ga želite odznačiti?" #: ../../install_steps_gtk.pm_.c:476 msgid "You can't unselect this package. It must be upgraded" msgstr "Ne možete odznačiti ovaj paket budući da ga treba nadograditi" #: ../../install_steps_gtk.pm_.c:489 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Ne možete označiti ovaj paket budući da nema dovoljno mjesta gdje ga se može " "instalirati" #: ../../install_steps_gtk.pm_.c:492 msgid "The following packages are going to be installed/removed" msgstr "Slijedeći paketi će biti instalirani/uklonjeni" #: ../../install_steps_gtk.pm_.c:501 msgid "You can't select/unselect this package" msgstr "Ne možete označiti/odznačiti ovaj paket" #: ../../install_steps_gtk.pm_.c:536 msgid "Estimating" msgstr "Procjenjujem" #: ../../install_steps_gtk.pm_.c:548 ../../interactive.pm_.c:84 #: ../../interactive.pm_.c:223 ../../interactive_newt.pm_.c:49 #: ../../interactive_newt.pm_.c:98 ../../interactive_stdio.pm_.c:27 #: ../../my_gtk.pm_.c:201 ../../my_gtk.pm_.c:459 msgid "Cancel" msgstr "Odustani" #: ../../install_steps_gtk.pm_.c:561 #, c-format msgid "%d packages" msgstr "%d paketa" #: ../../install_steps_gtk.pm_.c:561 msgid ", %U MB" msgstr ", %U MB" #: ../../install_steps_gtk.pm_.c:592 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../install_steps_gtk.pm_.c:611 msgid "There was an error installing packages:" msgstr "Pojavila se greška kod instalacije paketa:" #: ../../install_steps_interactive.pm_.c:40 msgid "An error occurred" msgstr "Pojavila se greška" #: ../../install_steps_interactive.pm_.c:57 msgid "Please, choose a language to use." msgstr "Molim izaberite jezik koji želite koristiti." #: ../../install_steps_interactive.pm_.c:72 #: ../../standalone/keyboarddrake_.c:22 msgid "Keyboard" msgstr "Tipkovnica" #: ../../install_steps_interactive.pm_.c:73 msgid "Please, choose your keyboard layout." msgstr "Molim izaberite raspored tipkovnice." #: ../../install_steps_interactive.pm_.c:81 msgid "You can choose other languages that will be available after install" msgstr "Možete izabrati druge jezike koji će biti dostupni nakon instalacije" #: ../../install_steps_interactive.pm_.c:91 msgid "Root Partition" msgstr "Korijenska particija" #: ../../install_steps_interactive.pm_.c:92 msgid "What is the root partition (/) of your system?" msgstr "Koja je korijenska particija (/) vašeg sustava?" #: ../../install_steps_interactive.pm_.c:100 #: ../../install_steps_interactive.pm_.c:140 msgid "Install Class" msgstr "Instalacijski razred" #: ../../install_steps_interactive.pm_.c:100 msgid "Which installation class do you want?" msgstr "Koji instalacijski razred želite?" #: ../../install_steps_interactive.pm_.c:102 msgid "Install/Upgrade" msgstr "Instaliraj/Nadogradi" #: ../../install_steps_interactive.pm_.c:102 msgid "Is this an install or an upgrade?" msgstr "Instalacija ili nadogradnja?" #: ../../install_steps_interactive.pm_.c:110 msgid "Automated" msgstr "Automatski" #: ../../install_steps_interactive.pm_.c:112 #: ../../install_steps_interactive.pm_.c:124 msgid "Customized" msgstr "Prilagođeno" #: ../../install_steps_interactive.pm_.c:113 #: ../../install_steps_interactive.pm_.c:124 msgid "Expert" msgstr "Ekspert" #: ../../install_steps_interactive.pm_.c:122 msgid "" "Are you sure you are an expert? \n" "You will be allowed to make powerfull but dangerous things here." msgstr "" #: ../../install_steps_interactive.pm_.c:129 msgid "Upgrade" msgstr "Dogradnja" #: ../../install_steps_interactive.pm_.c:135 msgid "Normal" msgstr "Normalno" #: ../../install_steps_interactive.pm_.c:136 msgid "Development" msgstr "Razvojno" #: ../../install_steps_interactive.pm_.c:137 msgid "Server" msgstr "Poslužitelj" #: ../../install_steps_interactive.pm_.c:141 msgid "Which usage is your system used for ?" msgstr "Koja je namjena ovog sustava ?" #: ../../install_steps_interactive.pm_.c:152 msgid "Please, choose the type of your mouse." msgstr "Molim izaberite koju vrstu miša koristite." #: ../../install_steps_interactive.pm_.c:160 ../../standalone/mousedrake_.c:38 msgid "Mouse Port" msgstr "Port miša" #: ../../install_steps_interactive.pm_.c:161 msgid "Please choose on which serial port your mouse is connected to." msgstr "Izaberite na kojem serijskom portu je miš priključen." #: ../../install_steps_interactive.pm_.c:172 msgid "Configuring IDE" msgstr "Podešavam IDE" #: ../../install_steps_interactive.pm_.c:172 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:182 msgid "no available partitions" msgstr "nema dostupnih particija" #: ../../install_steps_interactive.pm_.c:184 #, c-format msgid "(%dMB)" msgstr "(%dMB)" #: ../../install_steps_interactive.pm_.c:191 msgid "Please choose a partition to use as your root partition." msgstr "" "Izaberite particiju koju želite koristiti kao korijensku particiju (/)." #: ../../install_steps_interactive.pm_.c:198 msgid "Choose the mount points" msgstr "Odaberite mjesta montiranja" #: ../../install_steps_interactive.pm_.c:210 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske " "tablice" #: ../../install_steps_interactive.pm_.c:236 msgid "Choose the partitions you want to format" msgstr "Izaberite particije koje želite formatirati" #: ../../install_steps_interactive.pm_.c:240 msgid "Check bad blocks?" msgstr "" #: ../../install_steps_interactive.pm_.c:248 msgid "Formatting partitions" msgstr "Formatiram particije" #: ../../install_steps_interactive.pm_.c:252 #, c-format msgid "Creating and formatting file %s" msgstr "Stvaram i formatiram datoteku %s" #: ../../install_steps_interactive.pm_.c:255 msgid "Not enough swap to fulfill installation, please add some" msgstr "Nema dovoljno swapa za završetak instalacije, molim dodajte još" #: ../../install_steps_interactive.pm_.c:261 msgid "Looking for available packages" msgstr "Tražim dostupne pakete" #: ../../install_steps_interactive.pm_.c:267 msgid "Finding packages to upgrade" msgstr "Tražim pakete koje mogu nadograditi" #: ../../install_steps_interactive.pm_.c:284 msgid "Your system has not enough space left for installation or upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:317 msgid "Package Group Selection" msgstr "Odabir grupe paketa" #: ../../install_steps_interactive.pm_.c:320 msgid "Individual package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:360 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm_.c:363 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom naslovljen \"%s\"" #: ../../install_steps_interactive.pm_.c:391 msgid "" "Installing package %s\n" "%d%%" msgstr "" "Instaliram paket %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:400 msgid "Post-install configuration" msgstr "Postava nakon instalacije" #: ../../install_steps_interactive.pm_.c:410 msgid "Keep the current IP configuration" msgstr "Zadrži postojeću IP postavu" #: ../../install_steps_interactive.pm_.c:411 msgid "Reconfigure network now" msgstr "Promijeni mrežne postavke" #: ../../install_steps_interactive.pm_.c:412 msgid "Do not set up networking" msgstr "Ne podešavaj mrežu" #: ../../install_steps_interactive.pm_.c:415 #: ../../install_steps_interactive.pm_.c:420 msgid "Network Configuration" msgstr "Mrežne postavke" #: ../../install_steps_interactive.pm_.c:416 msgid "Local networking has already been configured. Do you want to:" msgstr "Lokalna mreža je već podešena. Da li želite:" #: ../../install_steps_interactive.pm_.c:421 msgid "Do you want to configure a local network for your system?" msgstr "Da li želite podesiti mrežne postavke sustava?" #: ../../install_steps_interactive.pm_.c:427 msgid "no network card found" msgstr "ne mogu pronaći niti jednu mrežnu karticu" #: ../../install_steps_interactive.pm_.c:449 msgid "Modem Configuration" msgstr "Postavke modema" #: ../../install_steps_interactive.pm_.c:450 msgid "" "Do you want to configure a dialup connection with modem for your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:462 #: ../../install_steps_interactive.pm_.c:463 #, c-format msgid "Configuring network device %s" msgstr "Podešavam mrežni uređaj %s" #: ../../install_steps_interactive.pm_.c:464 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Molim unesite IP postavke za ovaj stroj.\n" "Svaka stavka treba biti unesena kao IP adresa odvojena\n" "točkama (npr. 1.2.3.4)" #: ../../install_steps_interactive.pm_.c:467 msgid "Automatic IP" msgstr "Automatski IP" #: ../../install_steps_interactive.pm_.c:467 msgid "IP address:" msgstr "IP adresa:" #: ../../install_steps_interactive.pm_.c:467 msgid "Netmask:" msgstr "Netmask:" #: ../../install_steps_interactive.pm_.c:468 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../install_steps_interactive.pm_.c:474 ../../printerdrake.pm_.c:89 msgid "IP address should be in format 1.2.3.4" msgstr "IP adresa treba biti oblika 1.2.3.4" #: ../../install_steps_interactive.pm_.c:492 msgid "Configuring network" msgstr "Podešavam mrežu" #: ../../install_steps_interactive.pm_.c:493 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "Molim unesite ime računala.\n" "Ime računala treba biti puno ime računala,\n" "primjerice mojeracunalo.odjel.domena.hr.\n" "Također unesite IP adresu gateway računala ako gateway postoji" #: ../../install_steps_interactive.pm_.c:497 msgid "DNS server:" msgstr "DNS poslužitelj:" #: ../../install_steps_interactive.pm_.c:497 msgid "Gateway device:" msgstr "Gateway uređaj:" #: ../../install_steps_interactive.pm_.c:497 msgid "Gateway:" msgstr "Gateway:" #: ../../install_steps_interactive.pm_.c:497 msgid "Host name:" msgstr "Ime računala:" #: ../../install_steps_interactive.pm_.c:510 msgid "Try to find a modem?" msgstr "Da pokušam pronaći modem?" #: ../../install_steps_interactive.pm_.c:521 msgid "Please choose which serial port your modem is connected to." msgstr "Izaberite serijski port na kojemu se nalazi modem." #: ../../install_steps_interactive.pm_.c:527 msgid "Dialup options" msgstr "Podesi dialup" #: ../../install_steps_interactive.pm_.c:528 msgid "Connection name" msgstr "Ime veze" #: ../../install_steps_interactive.pm_.c:529 msgid "Phone number" msgstr "Telef. broj" #: ../../install_steps_interactive.pm_.c:530 msgid "Login ID" msgstr "Prijavno ime" #: ../../install_steps_interactive.pm_.c:532 msgid "Authentication" msgstr "Provjera autentičnosti" #: ../../install_steps_interactive.pm_.c:532 msgid "CHAP" msgstr "CHAP" #: ../../install_steps_interactive.pm_.c:532 msgid "PAP" msgstr "PAP" #: ../../install_steps_interactive.pm_.c:532 msgid "Script-based" msgstr "Temeljem skripta" #: ../../install_steps_interactive.pm_.c:532 msgid "Terminal-based" msgstr "Terminal-zasnovano" #: ../../install_steps_interactive.pm_.c:533 msgid "Domain name" msgstr "Ime domene" #: ../../install_steps_interactive.pm_.c:535 msgid "First DNS Server" msgstr "Prvi DNS poslužitelj" #: ../../install_steps_interactive.pm_.c:536 msgid "Second DNS Server" msgstr "Drugi DNS poslužitelj" #: ../../install_steps_interactive.pm_.c:549 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user do not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" #: ../../install_steps_interactive.pm_.c:580 msgid "Choose a mirror from which to get the packages" msgstr "Izaberite mirror sa kojeg želite skinuti pakete" #: ../../install_steps_interactive.pm_.c:588 msgid "Contacting the mirror to get the list of available packages" msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa" #: ../../install_steps_interactive.pm_.c:592 msgid "Please choose the packages you want to install." msgstr "Odaberite pakete za instalaciju." #: ../../install_steps_interactive.pm_.c:606 msgid "Which is your timezone?" msgstr "U kojoj ste vremenskoj zoni?" #: ../../install_steps_interactive.pm_.c:607 msgid "Is your hardware clock set to GMT?" msgstr "Da li je vaš hardverski sat namješten na GMT?" #: ../../install_steps_interactive.pm_.c:652 msgid "No password" msgstr "Bez lozinke" #: ../../install_steps_interactive.pm_.c:657 msgid "Use shadow file" msgstr "Koristi shadow datoteku" #: ../../install_steps_interactive.pm_.c:657 msgid "shadow" msgstr "shadow" #: ../../install_steps_interactive.pm_.c:658 msgid "MD5" msgstr "MD5" #: ../../install_steps_interactive.pm_.c:658 msgid "Use MD5 passwords" msgstr "Koristi MD5 lozinke" #: ../../install_steps_interactive.pm_.c:660 msgid "Use NIS" msgstr "Koristi NIS" #: ../../install_steps_interactive.pm_.c:660 msgid "yellow pages" msgstr "yellow pages" #: ../../install_steps_interactive.pm_.c:666 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" "Ova lozinka je prejednostavna (lozinka mora sadržavati barem %d znakova)" #: ../../install_steps_interactive.pm_.c:673 msgid "Authentification NIS" msgstr "Provjera autentičnosti NIS" #: ../../install_steps_interactive.pm_.c:674 msgid "NIS Domain" msgstr "NIS domena" #: ../../install_steps_interactive.pm_.c:674 msgid "NIS Server" msgstr "NIS poslužitelj" #: ../../install_steps_interactive.pm_.c:699 #: ../../standalone/adduserdrake_.c:36 msgid "Accept user" msgstr "Prihvati korisnika" #: ../../install_steps_interactive.pm_.c:699 #: ../../standalone/adduserdrake_.c:36 msgid "Add user" msgstr "Dodaj korisnika" #: ../../install_steps_interactive.pm_.c:700 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "(already added %s)" msgstr "(već postoji %s)" #: ../../install_steps_interactive.pm_.c:700 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Unesite korisnika\n" "%s" #: ../../install_steps_interactive.pm_.c:702 #: ../../standalone/adduserdrake_.c:39 msgid "Real name" msgstr "Puno ime" #: ../../install_steps_interactive.pm_.c:703 ../../printerdrake.pm_.c:84 #: ../../printerdrake.pm_.c:109 ../../standalone/adduserdrake_.c:40 msgid "User name" msgstr "Korisničko ime" #: ../../install_steps_interactive.pm_.c:708 #: ../../standalone/adduserdrake_.c:45 msgid "Shell" msgstr "Ljuska" #: ../../install_steps_interactive.pm_.c:710 #: ../../standalone/adduserdrake_.c:47 msgid "Icon" msgstr "" #: ../../install_steps_interactive.pm_.c:720 #: ../../standalone/adduserdrake_.c:57 msgid "This password is too simple" msgstr "Lozinka je prejednostavna" #: ../../install_steps_interactive.pm_.c:721 #: ../../standalone/adduserdrake_.c:58 msgid "Please give a user name" msgstr "Molim dajte korisniku korisničko ime" #: ../../install_steps_interactive.pm_.c:722 #: ../../standalone/adduserdrake_.c:59 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Korisničko ime može sadržavati samo mala slova, brojeve, `-' i `_'" #: ../../install_steps_interactive.pm_.c:723 #: ../../standalone/adduserdrake_.c:60 msgid "This user name is already added" msgstr "Ovaj korisnik već postoji" #: ../../install_steps_interactive.pm_.c:747 msgid "First floppy drive" msgstr "Prvi disketni pogon" #: ../../install_steps_interactive.pm_.c:748 msgid "Second floppy drive" msgstr "Drugi disketni pogon" #: ../../install_steps_interactive.pm_.c:749 msgid "Skip" msgstr "Preskoči" #: ../../install_steps_interactive.pm_.c:755 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:764 msgid "Sorry, no floppy drive available" msgstr "Žalim, međutim disketni pogon nije dostupan" #: ../../install_steps_interactive.pm_.c:767 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Izaberite disketni pogon koji želite koristiti za izradu boot diskete" #: ../../install_steps_interactive.pm_.c:772 #, c-format msgid "Insert a floppy in drive %s" msgstr "Umetnite disketu u pogon %s" #: ../../install_steps_interactive.pm_.c:773 msgid "Creating bootdisk" msgstr "Stvaram boot disketu" #: ../../install_steps_interactive.pm_.c:785 ../../standalone/drakboot_.c:55 msgid "Installation of LILO failed. The following error occured:" msgstr "Instalacija LILO-a nije uspjela. Prijavljena je slijedeća grešska:" #: ../../install_steps_interactive.pm_.c:806 msgid "Do you want to use SILO?" msgstr "Da li želite koristiti SILO?" #: ../../install_steps_interactive.pm_.c:817 msgid "SILO main options" msgstr "SILO glavne postavke" #: ../../install_steps_interactive.pm_.c:830 msgid "" "Here are the following entries in SILO.\n" "You can add some more or change the existing ones." msgstr "" "Ovo su trenutni zapisi u SILO-u.\n" "Možete dodati još koji ili urediti postojeći." #: ../../install_steps_interactive.pm_.c:858 msgid "Partition" msgstr "Particija" #: ../../install_steps_interactive.pm_.c:878 msgid "This label is already in use" msgstr "Ova oznaka već postoji" #: ../../install_steps_interactive.pm_.c:891 msgid "Installation of SILO failed. The following error occured:" msgstr "Instalacija SILO-a nije uspjela. Prijavljena je slijedeća grešska:" #: ../../install_steps_interactive.pm_.c:901 msgid "Preparing bootloader" msgstr "Pripremam bootloader" #: ../../install_steps_interactive.pm_.c:909 msgid "Do you want to use aboot?" msgstr "Da li želite koristiti aboot?" #: ../../install_steps_interactive.pm_.c:912 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm_.c:929 msgid "Proxies configuration" msgstr "Postavke proxya" #: ../../install_steps_interactive.pm_.c:930 msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../install_steps_interactive.pm_.c:931 msgid "FTP proxy" msgstr "FTP proxy" #: ../../install_steps_interactive.pm_.c:937 msgid "Proxy should be http://..." msgstr "Proxy treba biti http://" #: ../../install_steps_interactive.pm_.c:938 msgid "Proxy should be ftp://..." msgstr "Proxy treba biti ftp://" #: ../../install_steps_interactive.pm_.c:948 ../../standalone/draksec_.c:20 msgid "Welcome To Crackers" msgstr "Dobrodošli u Crackers" #: ../../install_steps_interactive.pm_.c:949 ../../standalone/draksec_.c:21 msgid "Poor" msgstr "Slab" #: ../../install_steps_interactive.pm_.c:950 ../../standalone/draksec_.c:22 msgid "Low" msgstr "Nizak" #: ../../install_steps_interactive.pm_.c:951 ../../standalone/draksec_.c:23 msgid "Medium" msgstr "Srednji" #: ../../install_steps_interactive.pm_.c:952 ../../standalone/draksec_.c:24 msgid "High" msgstr "Visok" #: ../../install_steps_interactive.pm_.c:953 ../../standalone/draksec_.c:25 msgid "Paranoid" msgstr "Paranoidan" #: ../../install_steps_interactive.pm_.c:966 msgid "Miscellaneous questions" msgstr "Razna pitanja" #: ../../install_steps_interactive.pm_.c:967 msgid "(may cause data corruption)" msgstr "(može uzrokovati oštećenje podataka)" #: ../../install_steps_interactive.pm_.c:967 msgid "Use hard drive optimisations?" msgstr "Koristi optimizacije hard diska?" #: ../../install_steps_interactive.pm_.c:968 ../../standalone/draksec_.c:46 msgid "Choose security level" msgstr "Izaberite sigurnosni nivo" #: ../../install_steps_interactive.pm_.c:969 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Precizna veličina RAM (pronađeno %d MB)" #: ../../install_steps_interactive.pm_.c:970 msgid "Removable media automounting" msgstr "Automatsko montiranje uklonjivog (removable) medija" #: ../../install_steps_interactive.pm_.c:972 msgid "Clean /tmp at each boot" msgstr "" #: ../../install_steps_interactive.pm_.c:975 msgid "Enable multi profiles" msgstr "" #: ../../install_steps_interactive.pm_.c:977 msgid "Enable num lock at startup" msgstr "Uključi NumLock kod pokretanja" #: ../../install_steps_interactive.pm_.c:980 msgid "Give the ram size in MB" msgstr "Upišite veličinu RAM u Mb" #: ../../install_steps_interactive.pm_.c:982 msgid "Can't use supermount in high security level" msgstr "Ne možete koristiti supermount u najvišem sigurnosnom nivou" #: ../../install_steps_interactive.pm_.c:1002 msgid "" "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n" "By default, the 3.3 server is used because it works on more graphic cards.\n" "\n" "Do you want to try XFree 4.0?" msgstr "" #: ../../install_steps_interactive.pm_.c:1015 #: ../../install_steps_interactive.pm_.c:1167 msgid "Try to find PCI devices?" msgstr "Da li tražim PCI uređaje?" #: ../../install_steps_interactive.pm_.c:1034 msgid "Do you want to generate an auto install floppy for linux replication?" msgstr "" #: ../../install_steps_interactive.pm_.c:1036 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Umetnite praznu disketu u pogon %s" #: ../../install_steps_interactive.pm_.c:1044 msgid "Creating auto install floppy" msgstr "" #: ../../install_steps_interactive.pm_.c:1068 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Niste završili sve korake.\n" "\n" "Želite li zbilja završiti?" #: ../../install_steps_interactive.pm_.c:1075 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" #: ../../install_steps_interactive.pm_.c:1084 msgid "Shutting down" msgstr "Gašenje sustava" #: ../../install_steps_interactive.pm_.c:1096 #, c-format msgid "Installing driver for %s card %s" msgstr "Instaliram upravljački program %s za karticu %s" #: ../../install_steps_interactive.pm_.c:1097 #, c-format msgid "(module %s)" msgstr "(modul %s)" #: ../../install_steps_interactive.pm_.c:1107 #, c-format msgid "Which %s driver should I try?" msgstr "Koji %s upravljački program želite isporbati?" #: ../../install_steps_interactive.pm_.c:1115 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../../install_steps_interactive.pm_.c:1120 msgid "Autoprobe" msgstr "Auto. ispitaj" #: ../../install_steps_interactive.pm_.c:1120 msgid "Specify options" msgstr "Odredi postavke" #: ../../install_steps_interactive.pm_.c:1124 #, c-format msgid "You may now provide its options to module %s." msgstr "Sada možete unijeti postavke za modul %s." #: ../../install_steps_interactive.pm_.c:1130 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Sada možete unijeti postavke za modul %s.\n" "Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n" "Na primjer, ``io=0x300 irq=7''" #: ../../install_steps_interactive.pm_.c:1133 msgid "Module options:" msgstr "Postavke modula:" #: ../../install_steps_interactive.pm_.c:1143 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Učitavanje modula %s nije uspjelo.\n" "Da li želite pokušati ponovo sa drugim parametrima?" #: ../../install_steps_interactive.pm_.c:1156 msgid "Try to find PCMCIA cards?" msgstr "Da li da tražim PCMCIA kartice?" #: ../../install_steps_interactive.pm_.c:1157 msgid "Configuring PCMCIA cards..." msgstr "Podešavam PCMCIA kartice..." #: ../../install_steps_interactive.pm_.c:1157 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:1176 #, c-format msgid "Found %s %s interfaces" msgstr "Pronašao sam %s %s interfacea" #: ../../install_steps_interactive.pm_.c:1177 msgid "Do you have another one?" msgstr "Da li imate još koji?" #: ../../install_steps_interactive.pm_.c:1178 #, c-format msgid "Do you have any %s interfaces?" msgstr "Da li imate %s interface?" #: ../../install_steps_interactive.pm_.c:1180 ../../interactive.pm_.c:79 #: ../../my_gtk.pm_.c:458 ../../printerdrake.pm_.c:124 msgid "No" msgstr "Ne" #: ../../install_steps_interactive.pm_.c:1180 ../../interactive.pm_.c:79 #: ../../my_gtk.pm_.c:458 msgid "Yes" msgstr "Da" #: ../../install_steps_interactive.pm_.c:1181 msgid "See hardware info" msgstr "Pokaži info o hardveru" #: ../../install_steps_interactive.pm_.c:1197 msgid "Bringing up the network" msgstr "Podižem mrežu" #: ../../install_steps_interactive.pm_.c:1202 msgid "Bringing down the network" msgstr "Onemogućujem mrežu" #: ../../install_steps_newt.pm_.c:21 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "Linux-Mandrake instalacija %s" #: ../../install_steps_newt.pm_.c:32 msgid "" " / between elements | selects | next screen " msgstr "" " / između elemenata | bira | slijedeći zaslon" #: ../../install_steps_newt.pm_.c:43 #, c-format msgid "" "You can now partition your %s hard drive\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../interactive.pm_.c:244 msgid "Please wait" msgstr "Molim pričekajte" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "Dvosmislenost (%s), budite precizniji\n" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:70 msgid "Bad choice, try again\n" msgstr "Krivi izbor, pokušajte ponovo\n" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr " ? (uobičajeno %s) " #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "Vaš izbor? (uobičajeno %s) " #: ../../interactive_stdio.pm_.c:71 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "Vaš izbor? (uobičajeno %s unesite `none' za nijedan)" #: ../../keyboard.pm_.c:89 ../../keyboard.pm_.c:116 msgid "Czech" msgstr "Češka" #: ../../keyboard.pm_.c:90 ../../keyboard.pm_.c:103 ../../keyboard.pm_.c:117 msgid "German" msgstr "Njemačka" #: ../../keyboard.pm_.c:91 ../../keyboard.pm_.c:120 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:92 ../../keyboard.pm_.c:122 msgid "Spanish" msgstr "Španjolska" #: ../../keyboard.pm_.c:93 ../../keyboard.pm_.c:123 msgid "Finnish" msgstr "Finska" #: ../../keyboard.pm_.c:94 ../../keyboard.pm_.c:104 ../../keyboard.pm_.c:124 msgid "French" msgstr "Francuska" #: ../../keyboard.pm_.c:95 ../../keyboard.pm_.c:143 msgid "Norwegian" msgstr "Norveška" #: ../../keyboard.pm_.c:96 msgid "Polish" msgstr "Poljska" #: ../../keyboard.pm_.c:97 ../../keyboard.pm_.c:148 msgid "Russian" msgstr "Ruska" #: ../../keyboard.pm_.c:98 ../../keyboard.pm_.c:157 msgid "UK keyboard" msgstr "UK tipkovnica" #: ../../keyboard.pm_.c:99 ../../keyboard.pm_.c:102 ../../keyboard.pm_.c:158 msgid "US keyboard" msgstr "US tipkovnica" #: ../../keyboard.pm_.c:106 msgid "Armenian (old)" msgstr "Armenska (stara)" #: ../../keyboard.pm_.c:107 msgid "Armenian (typewriter)" msgstr "Armenska (typewriter)" #: ../../keyboard.pm_.c:108 msgid "Armenian (phonetic)" msgstr "Armenska (fonetska)" #: ../../keyboard.pm_.c:111 msgid "Belgian" msgstr "Belgijska" #: ../../keyboard.pm_.c:112 msgid "Bulgarian" msgstr "Bugarska" #: ../../keyboard.pm_.c:113 msgid "Brazilian (ABNT-2)" msgstr "Brazilska (ABNT-2)" #: ../../keyboard.pm_.c:114 msgid "Swiss (German layout)" msgstr "Švicarska (Njemački raspored)" #: ../../keyboard.pm_.c:115 msgid "Swiss (French layout)" msgstr "Švicarska (francuski raspored)" #: ../../keyboard.pm_.c:118 msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm_.c:119 msgid "Danish" msgstr "Danska" #: ../../keyboard.pm_.c:121 msgid "Estonian" msgstr "Estonska" #: ../../keyboard.pm_.c:125 msgid "Georgian (\"Russian\" layout)" msgstr "Gruzijska (\"Ruski\" raspored)" #: ../../keyboard.pm_.c:126 msgid "Georgian (\"Latin\" layout)" msgstr "Gruzijska (\"Latin\" raspored)" #: ../../keyboard.pm_.c:127 msgid "Greek" msgstr "Grčka" #: ../../keyboard.pm_.c:128 msgid "Hungarian" msgstr "Mađarska" #: ../../keyboard.pm_.c:129 msgid "Croatian" msgstr "" #: ../../keyboard.pm_.c:130 msgid "Israeli" msgstr "Izraelska" #: ../../keyboard.pm_.c:131 msgid "Israeli (Phonetic)" msgstr "Izraelska (fonetska)" #: ../../keyboard.pm_.c:134 msgid "Icelandic" msgstr "Islandska" #: ../../keyboard.pm_.c:135 msgid "Italian" msgstr "Talijanska" #: ../../keyboard.pm_.c:136 msgid "Latin American" msgstr "Latino američka" #: ../../keyboard.pm_.c:137 msgid "Dutch" msgstr "Nizozemska" #: ../../keyboard.pm_.c:138 msgid "Lithuanian AZERTY (old)" msgstr "Lituanska AZERTY (stara)" #: ../../keyboard.pm_.c:140 msgid "Lithuanian AZERTY (new)" msgstr "Lituanska AZERTY (nova)" #: ../../keyboard.pm_.c:141 msgid "Lithuanian \"number row\" QWERTY" msgstr "Lituanska \"number row\" QWERTY" #: ../../keyboard.pm_.c:142 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Lituanska \"fonetska\" QWERTY" #: ../../keyboard.pm_.c:144 msgid "Polish (qwerty layout)" msgstr "Poljska (qwerty raspored)" #: ../../keyboard.pm_.c:145 msgid "Polish (qwertz layout)" msgstr "Poljska (qwertz raspored)" #: ../../keyboard.pm_.c:146 msgid "Portuguese" msgstr "Portugalska" #: ../../keyboard.pm_.c:147 msgid "Canadian (Quebec)" msgstr "Kanadska (Quebec)" #: ../../keyboard.pm_.c:149 msgid "Russian (Yawerty)" msgstr "Ruska (Yawerty)" #: ../../keyboard.pm_.c:150 msgid "Swedish" msgstr "Švedska" #: ../../keyboard.pm_.c:151 msgid "Slovenian" msgstr "Slovenska" #: ../../keyboard.pm_.c:152 msgid "Slovakian" msgstr "Slovačka" #: ../../keyboard.pm_.c:153 msgid "Thai keyboard" msgstr "Tajlandska tipkovnica" #: ../../keyboard.pm_.c:154 msgid "Turkish (traditional \"F\" model)" msgstr "Turska (tradicionalni \"F\" model)" #: ../../keyboard.pm_.c:155 msgid "Turkish (modern \"Q\" model)" msgstr "Turska (moderna \"Q\" model)" #: ../../keyboard.pm_.c:156 msgid "Ukrainian" msgstr "Ukrajinska" #: ../../keyboard.pm_.c:159 msgid "US keyboard (international)" msgstr "US keyboard (internacionalna)" #: ../../keyboard.pm_.c:160 msgid "Yugoslavian (latin layout)" msgstr "Jugoslavenska (latinični raspored)" # NOTE: this message will be displayed by lilo at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # #: ../../lilo.pm_.c:176 #, c-format msgid "" "Welcome to LILO the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or wait %d seconds for " "default boot.\n" "\n" msgstr "" "Dobrodosli u LILO izbornik operativnih sustava!\n" "\n" "Za popis dostupnih sustava pritisnite .\n" "\n" "Ako zelite ucitati neki od operativnih sustava upišite njegovo ime\n" "i pritisnite oili pricekajte %d sekundi za podrazumijevani\n" "operativni sustav.\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../lilo.pm_.c:431 msgid "Welcome to GRUB the operating system chooser!" msgstr "" #: ../../lilo.pm_.c:432 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #: ../../lilo.pm_.c:433 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #: ../../lilo.pm_.c:434 msgid "commands before booting, or 'c' for a command-line." msgstr "" #: ../../lilo.pm_.c:435 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../lilo.pm_.c:439 msgid "not enough room in /boot" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../lilo.pm_.c:518 msgid "Desktop" msgstr "" #: ../../lilo.pm_.c:518 msgid "Start Menu" msgstr "" #: ../../mouse.pm_.c:21 msgid "Sun - Mouse" msgstr "Sun - miš" #: ../../mouse.pm_.c:23 msgid "Apple ADB Mouse" msgstr "Apple ADB miš" #: ../../mouse.pm_.c:24 msgid "Apple ADB Mouse (2 Buttons)" msgstr "Apple ADB miš (2 gumba)" #: ../../mouse.pm_.c:25 msgid "Apple ADB Mouse (3+ Buttons)" msgstr "Apple ADB miš (3 gumba i više)" #: ../../mouse.pm_.c:26 msgid "Apple USB Mouse" msgstr "Apple USB miš" #: ../../mouse.pm_.c:27 msgid "Apple USB Mouse (2 Buttons)" msgstr "Apple USB miš (2 gumba)" #: ../../mouse.pm_.c:28 msgid "Apple USB Mouse (3+ Buttons)" msgstr "Apple USB miš (3 gumba i više)" #: ../../mouse.pm_.c:30 msgid "Generic Mouse (PS/2)" msgstr "Generički miš (PS/2)" #: ../../mouse.pm_.c:31 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "Logitech MouseMan/FirstMouse (ps/2)" #: ../../mouse.pm_.c:32 msgid "Generic 3 Button Mouse (PS/2)" msgstr "Generički miš s 3 gumba (PS/2)" #: ../../mouse.pm_.c:33 msgid "ALPS GlidePoint (PS/2)" msgstr "ALPS GlidePoint (PS/2)" #: ../../mouse.pm_.c:34 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)" #: ../../mouse.pm_.c:35 msgid "Kensington Thinking Mouse (PS/2)" msgstr "Kensington Thinking Mouse (PS/2)" #: ../../mouse.pm_.c:36 msgid "ASCII MieMouse (PS/2)" msgstr "ASCII MieMouse (PS/2)" #: ../../mouse.pm_.c:37 msgid "Genius NetMouse (PS/2)" msgstr "Genius NetMouse (PS/2)" #: ../../mouse.pm_.c:38 msgid "Genius NetMouse Pro (PS/2)" msgstr "Genius NetMouse Pro (PS/2)" #: ../../mouse.pm_.c:39 msgid "Genius NetScroll (PS/2)" msgstr "Genius NetScroll (PS/2)" #: ../../mouse.pm_.c:40 msgid "Microsoft IntelliMouse (PS/2)" msgstr "Microsoft IntelliMouse (PS/2)" #: ../../mouse.pm_.c:41 msgid "ATI Bus Mouse" msgstr "ATI Bus miš" #: ../../mouse.pm_.c:42 msgid "Microsoft Bus Mouse" msgstr "Microsoft Bus miš" #: ../../mouse.pm_.c:43 msgid "Logitech Bus Mouse" msgstr "Logitech Bus miš" #: ../../mouse.pm_.c:44 msgid "USB Mouse" msgstr "USB miš" #: ../../mouse.pm_.c:45 msgid "USB Mouse (3 buttons or more)" msgstr "USB miš (3 gumba i više)" #: ../../mouse.pm_.c:47 msgid "No Mouse" msgstr "Nema miša" #: ../../mouse.pm_.c:48 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "Microsoft Rev 2.1A ili više (serijski)" #: ../../mouse.pm_.c:49 msgid "Logitech CC Series (serial)" msgstr "Logitech CC Series (serijski)" #: ../../mouse.pm_.c:50 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "Logitech MouseMan+/FirstMouse+ (serijski)" #: ../../mouse.pm_.c:51 msgid "ASCII MieMouse (serial)" msgstr "ASCII MieMouse (serijski)" #: ../../mouse.pm_.c:52 msgid "Genius NetMouse (serial)" msgstr "Genius NetMouse (serijski)" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse (serial)" msgstr "Microsoft IntelliMouse (serijski)" #: ../../mouse.pm_.c:54 msgid "MM Series (serial)" msgstr "MM Series (serijski)" #: ../../mouse.pm_.c:55 msgid "MM HitTablet (serial)" msgstr "MM HitTablet (serijski)" #: ../../mouse.pm_.c:56 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Miš (serijski, stari C7 tip)" #: ../../mouse.pm_.c:57 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "Logitech MouseMan/FirstMouse (serijski)" #: ../../mouse.pm_.c:58 msgid "Generic Mouse (serial)" msgstr "Generički Miš (serijski)" #: ../../mouse.pm_.c:59 msgid "Microsoft compatible (serial)" msgstr "Microsoft compatible (serial)" #: ../../mouse.pm_.c:60 msgid "Generic 3 Button Mouse (serial)" msgstr "Generic 3 Button Mouse (serial)" #: ../../mouse.pm_.c:61 msgid "Mouse Systems (serial)" msgstr "Mouse Systems (serial)" #: ../../my_gtk.pm_.c:459 msgid "Is this correct?" msgstr "Da li je ovo ispravno?" #: ../../partition_table.pm_.c:533 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" "Imate rupu u svojoj particijskoj tablici međutim ja je ne mogu iskoristiti.\n" "Jedino rješenje je da pomaknete vašu primarnu particiju kako bi rupa bila\n" "odmah do proširenih particija." #: ../../partition_table.pm_.c:621 #, c-format msgid "Error reading file %s" msgstr "Greška prilikom čitanja datoteke %s" #: ../../partition_table.pm_.c:628 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Vraćanje iz datoteke %s nije uspjelo: %s" #: ../../partition_table.pm_.c:630 msgid "Bad backup file" msgstr "Loša backup datoteka" #: ../../partition_table.pm_.c:651 #, c-format msgid "Error writing to file %s" msgstr "Greška prilikom pisanja u datoteku %s" #: ../../pkgs.pm_.c:20 msgid "mandatory" msgstr "obvezno" #: ../../pkgs.pm_.c:21 msgid "must have" msgstr "potrebno" #: ../../pkgs.pm_.c:22 msgid "important" msgstr "važno" #: ../../pkgs.pm_.c:24 msgid "very nice" msgstr "vrlo lijepo" #: ../../pkgs.pm_.c:25 msgid "nice" msgstr "lijepo" #: ../../pkgs.pm_.c:26 ../../pkgs.pm_.c:27 msgid "interesting" msgstr "interesantno" #: ../../pkgs.pm_.c:28 ../../pkgs.pm_.c:29 ../../pkgs.pm_.c:30 #: ../../pkgs.pm_.c:31 msgid "maybe" msgstr "možda" #: ../../pkgs.pm_.c:33 msgid "i18n (important)" msgstr "i18n (važno)" #: ../../pkgs.pm_.c:34 msgid "i18n (very nice)" msgstr "i18n (vrlo lijepo)" #: ../../pkgs.pm_.c:35 msgid "i18n (nice)" msgstr "i18n (lijepo)" #: ../../placeholder.pm_.c:5 msgid "Show less" msgstr "Prikaži manje" #: ../../placeholder.pm_.c:6 msgid "Show more" msgstr "Prikaži više" #: ../../printer.pm_.c:244 msgid "Local printer" msgstr "Lokalni pisač" #: ../../printer.pm_.c:245 msgid "Remote lpd" msgstr "Udaljeni lpd" #: ../../printer.pm_.c:246 msgid "SMB/Windows 95/98/NT" msgstr "SMB/Windows 95/98/NT" #: ../../printer.pm_.c:247 msgid "NetWare" msgstr "NetWare" #: ../../printerdrake.pm_.c:19 msgid "Detecting devices..." msgstr "Otkrivanje uređaja..." #: ../../printerdrake.pm_.c:19 msgid "Test ports" msgstr "Iskušaj portove" #: ../../printerdrake.pm_.c:35 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "Pisač, model \"%s\", je otkriven na " #: ../../printerdrake.pm_.c:44 msgid "Local Printer Device" msgstr "Uređaj lokalnog pisača" #: ../../printerdrake.pm_.c:45 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" "Na koji uređaj je vaš pisač spojen \n" "(napomena: /dev/lp0 je jednak LPT1:)?\n" #: ../../printerdrake.pm_.c:47 msgid "Printer Device" msgstr "Uređaj pisača" #: ../../printerdrake.pm_.c:62 msgid "Remote lpd Printer Options" msgstr "Postavke udaljenog lpd pisača" #: ../../printerdrake.pm_.c:63 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" "Ukoliko želite koristiti udaljeni lpd red morate unijeti\n" "ime ispisnog poslužitelja te ime reda na poslužitelju\n" "na koji želite ispisivati." #: ../../printerdrake.pm_.c:66 msgid "Remote hostname" msgstr "Udaljeno računalo" #: ../../printerdrake.pm_.c:67 msgid "Remote queue" msgstr "Udaljeni red" #: ../../printerdrake.pm_.c:75 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Postavke SMB (Windows 9x/NT) pisača" #: ../../printerdrake.pm_.c:76 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:81 msgid "SMB server host" msgstr "SMB poslužitelj" #: ../../printerdrake.pm_.c:82 msgid "SMB server IP" msgstr "IP SMB poslužitelja" #: ../../printerdrake.pm_.c:83 msgid "Share name" msgstr "Ime sharea" #: ../../printerdrake.pm_.c:86 msgid "Workgroup" msgstr "Radna grupa" #: ../../printerdrake.pm_.c:102 msgid "NetWare Printer Options" msgstr "Postavke NetWare pisača" #: ../../printerdrake.pm_.c:103 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../../printerdrake.pm_.c:107 msgid "Printer Server" msgstr "Ispisni poslužitelj" #: ../../printerdrake.pm_.c:108 msgid "Print Queue Name" msgstr "Ime reda pisača" #: ../../printerdrake.pm_.c:121 msgid "Yes, print ASCII test page" msgstr "Da, ispiši ASCII probnu stranicu" #: ../../printerdrake.pm_.c:122 msgid "Yes, print PostScript test page" msgstr "Da, ispiši PostScript probnu stranicu" #: ../../printerdrake.pm_.c:123 msgid "Yes, print both test pages" msgstr "Da, ispiši obje probne stranice" #: ../../printerdrake.pm_.c:130 msgid "Configure Printer" msgstr "Postavke pisača" #: ../../printerdrake.pm_.c:131 msgid "What type of printer do you have?" msgstr "Kakav tip pisača posjedujete?" #: ../../printerdrake.pm_.c:163 msgid "Printer options" msgstr "Postavke pisača" #: ../../printerdrake.pm_.c:164 msgid "Paper Size" msgstr "Veličina papira" #: ../../printerdrake.pm_.c:165 msgid "Eject page after job?" msgstr "" #: ../../printerdrake.pm_.c:170 msgid "Uniprint driver options" msgstr "Postavke uniprinter pokretačkog programa" #: ../../printerdrake.pm_.c:171 msgid "Color depth options" msgstr "" #: ../../printerdrake.pm_.c:173 msgid "Print text as PostScript?" msgstr "Ispiši tekst kao PostScript?" #: ../../printerdrake.pm_.c:174 msgid "Reverse page order" msgstr "Obrni redoslijed stranica" #: ../../printerdrake.pm_.c:176 msgid "Fix stair-stepping text?" msgstr "" #: ../../printerdrake.pm_.c:179 msgid "Number of pages per output pages" msgstr "" #: ../../printerdrake.pm_.c:180 msgid "Right/Left margins in points (1/72 of inch)" msgstr "Desna/lijeva margina u točkama (1/72 inča)" #: ../../printerdrake.pm_.c:181 msgid "Top/Bottom margins in points (1/72 of inch)" msgstr "Gornja/donja margina u točkama (1/72 inča)" #: ../../printerdrake.pm_.c:184 msgid "Extra GhostScript options" msgstr "Dodatne GhostScript postavke" #: ../../printerdrake.pm_.c:187 msgid "Extra Text options" msgstr "Dodatne Tekst Postavke" #: ../../printerdrake.pm_.c:198 msgid "Do you want to test printing?" msgstr "Da li želite iskušati pisač?" #: ../../printerdrake.pm_.c:210 msgid "Printing test page(s)..." msgstr "Ispisujem probnu stranicu(e)..." #: ../../printerdrake.pm_.c:218 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Printing status:\n" "%s\n" "\n" "Does it work properly?" msgstr "" "Probna stranica(e) poslana je na pisač.\n" "Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n" "Stanje ispisa:\n" "%s\n" "\n" "Da li sve radi kako spada?" #: ../../printerdrake.pm_.c:222 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" "Probna stranica(e) poslana je na pisač.\n" "Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n" "Da li sve radi kako spada?" #: ../../printerdrake.pm_.c:238 msgid "Printer" msgstr "Pisač" #: ../../printerdrake.pm_.c:239 msgid "Would you like to configure a printer?" msgstr "Da li želite podesiti pisač?" #: ../../printerdrake.pm_.c:243 msgid "" "Here are the following print queues.\n" "You can add some more or change the existing ones." msgstr "" "Slijedeće su redovi pisača.\n" "Možete dodati još koji ili urediti postojeći." #: ../../printerdrake.pm_.c:266 ../../printerdrake.pm_.c:272 msgid "Select Printer Connection" msgstr "Odaberi vezu pisača" #: ../../printerdrake.pm_.c:267 msgid "How is the printer connected?" msgstr "Kako je pisač povezan?" #: ../../printerdrake.pm_.c:272 msgid "Remove queue" msgstr "Ukloni red" #: ../../printerdrake.pm_.c:273 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue and how is the printer " "connected?" msgstr "" #: ../../printerdrake.pm_.c:276 msgid "Name of queue" msgstr "Ime reda" #: ../../printerdrake.pm_.c:277 msgid "Spool directory" msgstr "Posrednički direktorij" #: ../../printerdrake.pm_.c:278 msgid "Printer Connection" msgstr "Veza pisača" #: ../../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d" #: ../../raid.pm_.c:106 msgid "Can't write file $file" msgstr "Ne mogu pisati datoteku $file" #: ../../raid.pm_.c:131 msgid "mkraid failed" msgstr "mkraid nije uspio" #: ../../raid.pm_.c:131 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid nije uspio (možda niste instalirali raidtools alate?)" #: ../../raid.pm_.c:147 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Nema dovoljno particija za RAID nivo %d\n" #: ../../services.pm_.c:14 msgid "Anacron a periodic command scheduler." msgstr "" #: ../../services.pm_.c:15 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:17 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:19 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:22 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:25 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" "Apache je World Wide Web poslužitelj. Koristi se za posluživanje HTML\n" "dokumenata i CGI skriptova." #: ../../services.pm_.c:27 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:31 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:34 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:36 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" "named (BIND) je Domain Name Server (DNS) poslužitelj koji se upotrebljava\n" "za razlučivanje imena računala u IP adrese." #: ../../services.pm_.c:38 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:40 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Aktivira/Deaktivira sva podešena mrežna sučelja prilikom pokretanja\n" "sustava." #: ../../services.pm_.c:42 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:45 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:47 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:50 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:53 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" #: ../../services.pm_.c:55 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:57 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:60 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:62 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:64 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:66 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:68 msgid "This startup script try to load your modules for your usb mouse." msgstr "" #: ../../services.pm_.c:69 msgid "Starts and stops the X Font Server at boot time and shutdown." msgstr "" #: ../../services.pm_.c:92 msgid "Choose which services should be automatically started at boot time" msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a" # NOTE: this message will be displayed by lilo at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # #: ../../silo.pm_.c:116 #, c-format msgid "" "Welcome to SILO the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Dobrodosli u SILO izbornik operativnih sustava!\n" "\n" "Za popis dostupnih sustava pritisnite .\n" "\n" "Ako zelite ucitati neki od operativnih sustava upišite njegovo ime\n" "i pritisnite oili pricekajte %d sekundi za podrazumijevani\n" "operativni sustav.\n" #: ../../standalone/drakboot_.c:23 msgid "Configure LILO/GRUB" msgstr "Podesi LILO/GRUB" #: ../../standalone/drakboot_.c:24 msgid "Create a boot floppy" msgstr "Napravi boot disketu" #: ../../standalone/drakboot_.c:25 msgid "Format floppy" msgstr "Formatiraj disketu" #: ../../standalone/drakboot_.c:36 msgid "Choice" msgstr "Izbor" #: ../../standalone/draksec_.c:28 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../standalone/draksec_.c:31 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Lozinke su sada uključene međutim još ne preporučam korištenje ovog računala " "u mrežnom okolišu." #: ../../standalone/draksec_.c:32 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" #: ../../standalone/draksec_.c:34 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" #: ../../standalone/draksec_.c:36 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" #: ../../standalone/draksec_.c:39 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "" #: ../../standalone/draksec_.c:49 msgid "Setting security level" msgstr "Podešavam sigurnosni nivo" #: ../../standalone/drakxconf_.c:21 msgid "Choose the tool you want to use" msgstr "Izaberite alat koje želite koristiti" #: ../../standalone/keyboarddrake_.c:23 msgid "What is your keyboard layout?" msgstr "Koji raspored tipkovnice imate?" #: ../../standalone/mousedrake_.c:25 msgid "What is the type of your mouse?" msgstr "Koja je vrsta vašeg miša?" #: ../../standalone/mousedrake_.c:30 msgid "no serial_usb found\n" msgstr "niti jedan serial_usb nije pronađen\n" #: ../../standalone/mousedrake_.c:35 msgid "Emulate third button?" msgstr "Emuliranje treće tipke?" #: ../../standalone/mousedrake_.c:39 msgid "Which serial port is your mouse connected to?" msgstr "Na koji serijski port je miš priključen?" #: ../../standalone/rpmdrake_.c:25 msgid "reading configuration" msgstr "učitavam postavu" #: ../../standalone/rpmdrake_.c:45 ../../standalone/rpmdrake_.c:50 #: ../../standalone/rpmdrake_.c:253 msgid "File" msgstr "Datoteka" #: ../../standalone/rpmdrake_.c:48 ../../standalone/rpmdrake_.c:229 #: ../../standalone/rpmdrake_.c:253 ../../standalone/rpmdrake_.c:269 msgid "Search" msgstr "Traži" #: ../../standalone/rpmdrake_.c:49 ../../standalone/rpmdrake_.c:56 msgid "Package" msgstr "Paket" #: ../../standalone/rpmdrake_.c:51 msgid "Text" msgstr "Tekst" #: ../../standalone/rpmdrake_.c:53 msgid "Tree" msgstr "Stablo" #: ../../standalone/rpmdrake_.c:54 msgid "Sort by" msgstr "Sortiraj" #: ../../standalone/rpmdrake_.c:55 msgid "Category" msgstr "Kategorija" #: ../../standalone/rpmdrake_.c:58 msgid "See" msgstr "" #: ../../standalone/rpmdrake_.c:59 ../../standalone/rpmdrake_.c:163 msgid "Installed packages" msgstr "Instalirani paketi" #: ../../standalone/rpmdrake_.c:60 msgid "Available packages" msgstr "Dostupni paketi" #: ../../standalone/rpmdrake_.c:62 msgid "Show only leaves" msgstr "" #: ../../standalone/rpmdrake_.c:67 msgid "Expand all" msgstr "Proširi sve" #: ../../standalone/rpmdrake_.c:68 msgid "Collapse all" msgstr "Sažmi sve" #: ../../standalone/rpmdrake_.c:70 msgid "Configuration" msgstr "Postavke" #: ../../standalone/rpmdrake_.c:71 msgid "Add location of packages" msgstr "Dodaj lokaciju paketa" #: ../../standalone/rpmdrake_.c:75 msgid "Update location" msgstr "Osvježi lokaciju" #: ../../standalone/rpmdrake_.c:79 ../../standalone/rpmdrake_.c:328 msgid "Remove" msgstr "Ukloni" #: ../../standalone/rpmdrake_.c:100 msgid "Configuration: Add Location" msgstr "Postavke: Dodaj lokaciju" #: ../../standalone/rpmdrake_.c:103 msgid "Find Package" msgstr "Pronađi paket" #: ../../standalone/rpmdrake_.c:104 msgid "Find Package containing file" msgstr "Pronađi paket koji sadrži datoteku" #: ../../standalone/rpmdrake_.c:105 msgid "Toggle between Installed and Available" msgstr "" #: ../../standalone/rpmdrake_.c:139 msgid "Files:\n" msgstr "Datoteke:\n" #: ../../standalone/rpmdrake_.c:161 ../../standalone/rpmdrake_.c:209 msgid "Uninstall" msgstr "Deinstaliraj" #: ../../standalone/rpmdrake_.c:163 msgid "Choose package to install" msgstr "Odaberite pakete za instaliranje" #: ../../standalone/rpmdrake_.c:190 msgid "Checking dependencies" msgstr "" #: ../../standalone/rpmdrake_.c:190 ../../standalone/rpmdrake_.c:409 msgid "Wait" msgstr "Pričekaj" #: ../../standalone/rpmdrake_.c:209 msgid "The following packages are going to be uninstalled" msgstr "Slijedeći paketi će biti deinstalirani" #: ../../standalone/rpmdrake_.c:210 msgid "Uninstalling the RPMs" msgstr "Deinstalacija RPMova u toku" #: ../../standalone/rpmdrake_.c:229 ../../standalone/rpmdrake_.c:269 msgid "Regexp" msgstr "Regexp" #: ../../standalone/rpmdrake_.c:229 msgid "Which package are looking for" msgstr "Koje pakete tražite" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 #, c-format msgid "%s not found" msgstr "%s nije nađen" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No match" msgstr "" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No more match" msgstr "" #: ../../standalone/rpmdrake_.c:246 msgid "" "rpmdrake is currently in ``low memory'' mode.\n" "I'm going to relaunch rpmdrake to allow searching files" msgstr "" #: ../../standalone/rpmdrake_.c:253 msgid "Which file are you looking for?" msgstr "Koje datoteke tražite?" #: ../../standalone/rpmdrake_.c:269 msgid "What are looking for?" msgstr "Što tražite?" #: ../../standalone/rpmdrake_.c:289 msgid "Give a name (eg: `extra', `commercial')" msgstr "" #: ../../standalone/rpmdrake_.c:291 msgid "Directory" msgstr "Direktorij" #: ../../standalone/rpmdrake_.c:294 msgid "No cdrom available (nothing in /mnt/cdrom)" msgstr "cdrom nije dostupan (nema ničega u /mnt/cdrom)" #: ../../standalone/rpmdrake_.c:298 msgid "URL of the directory containing the RPMs" msgstr "URL direktorija koji sadrži RPMove" #: ../../standalone/rpmdrake_.c:299 msgid "" "For FTP and HTTP, you need to give the location for hdlist\n" "It must be relative to the URL above" msgstr "" #: ../../standalone/rpmdrake_.c:302 msgid "Please submit the following information" msgstr "" #: ../../standalone/rpmdrake_.c:304 #, c-format msgid "%s is already in use" msgstr "%s se već koristi" #: ../../standalone/rpmdrake_.c:315 ../../standalone/rpmdrake_.c:321 #: ../../standalone/rpmdrake_.c:329 msgid "Updating the RPMs base" msgstr "" #: ../../standalone/rpmdrake_.c:328 #, c-format msgid "Going to remove entry %s" msgstr "Uklanjam zapis %s" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves" msgstr "Tražim listove" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves takes some time" msgstr "" #~ msgid "useless" #~ msgstr "beskorisno" #~ msgid "garbage" #~ msgstr "smeće"