msgid ""
msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
msgid ""
"You now need to decide where you want to install the Mandrivalinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrivalinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrivalinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrivalinux system, choose\n"
"this option. Be careful, because you won't be able to undo this operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Ahora necesita elegir el lugar de su disco rígido donde se instalará su\n"
"sistema operativo Mandrivalinux. Si su disco rígido está vacío o si un\n"
"sistema operativo existente está utilizando todo el espacio disponible,\n"
"necesitará particionar el disco. Básicamente, particionar un disco rígido\n"
"consiste en dividirlo lógicamente para crear espacio para instalar su\n"
"sistema Mandrivalinux nuevo.\n"
"\n"
"Debido a que el proceso de particionado de un disco rígido por lo general\n"
"es irreversible y puede llevar a pérdida de datos, el particionado puede\n"
"ser intimidante y estresante si Usted es un usuario inexperto. Por fortuna,\n"
"DrakX incluye un asistente que simplifica este proceso. Antes de continuar\n"
"con este paso, por favor lea el resto de esta sección y, por sobre todo,\n"
"tómese su tiempo.\n"
"\n"
"Dependiendo de la configuración de su disco rígido, están disponibles\n"
"varias opciones:\n"
"\n"
" * \"%s\". Esta opción simplemente llevará a un particionado automático de\n"
"su(s) disco(s) vacío(s). Si elige esta opción, no se le pedirán más\n"
"detalles ni se le formularán más preguntas.\n"
"\n"
" * \"%s\". El asistente ha detectado una o más particiones Linux existentes\n"
"en su disco rígido. Si desea utilizarlas, elija esta opción. Entonces se le\n"
"pedirá que elija los puntos de montaje asociados a cada una de las\n"
"particiones. Los puntos de montaje legados se seleccionan de manera\n"
"predeterminada, y por lo general es buena idea mantenerlos.\n"
"\n"
" * \"%s\". Si Microsoft Windows está instalado en su disco rígido y ocupa\n"
"todo el espacio disponible en el mismo, Usted tendrá que liberar espacio\n"
"para Linux. Para hacerlo, puede borrar su partición y datos Microsoft\n"
"Windows (vea la solución \"Borrar el disco entero\") o cambiar el tamaño de\n"
"su partición Microsoft Windows FAT o NTFS. El cambio de tamaño se puede\n"
"realizar sin la pérdida de datos, siempre y cuando Usted haya\n"
"desfragmentado con anterioridad la partición Windows. Es altamente\n"
"recomendable hacer una copia de respaldo de sus datos. Se recomienda usar\n"
"esta solución si desea utilizar tanto Mandrivalinux como Microsoft Windows\n"
"en la misma computadora.\n"
"\n"
" Antes de elegir esta opción, por favor comprenda que después de este\n"
"procedimiento el tamaño de su partición Microsoft Windows será más pequeño\n"
"que cuando comenzó. Tendrá menos espacio bajo Microsoft Windows para\n"
"almacenar sus datos o instalar software nuevo.\n"
"\n"
" * \"%s\". Si desea borrar todos los datos y todas las particiones\n"
"presentes en su disco rígido y reemplazarlos con su nuevo sistema\n"
"Mandrivalinux, seleccione esta opción. Tenga cuidado con esta solución ya\n"
"que no podrá revertir su elección después de confirmarla.\n"
"\n"
" !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
"\n"
" * \"%s\". Esta opción aparece cuando todo el disco está tomado por\n"
"Microsoft Windows. Al elegir esta opción simplemente se borrará todo el\n"
"disco y se comenzará desde cero, particionando todo de nuevo.\n"
"\n"
" !! Si elige esta opción, se perderán todos los datos en su disco. !!\n"
"\n"
" * \"%s\": elija esta opción si desea particionar manualmente su disco\n"
"rígido. Tenga cuidado - esta es una elección potente pero peligrosa y puede\n"
"perder todos sus datos con facilidad. Esa es la razón por la cual esta\n"
"opción realmente sólo se recomienda si ha hecho algo como esto antes y\n"
"tiene algo de experiencia. Para más instrucciones acerca de la utilización\n"
"del utilitario DiskDrake, consulte la sección \"Administrar sus\n"
"particiones\" de la \"Guía de Comienzo\"."
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Resolución\n"
"\n"
" Aquí puede elegir las resoluciones y profundidades de color disponibles\n"
"para su hardware de gráficos. Seleccione la que mejor se ajuste a sus\n"
"necesidades (podrá hacer cambios luego de la instalación). En la imagen del\n"
"monitor se muestra un ejemplo de la configuración elegida."
# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/es/drakx-chapter.xml
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point won't be authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system won't work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you won't affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and don't care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
"puede tener sus preferencias propias, sus archivos propios, y así\n"
"sucesivamente. Puede leer la \"Guía de Comienzo\" para aprender más. Pero,\n"
"a diferencia de \"root\", que es el administrador del sistema, los usuarios\n"
"que agregue en este punto no estarán autorizados a cambiar nada excepto su\n"
"configuración y sus archivos propios, protegiendo al sistema con[0] eq $ENV{USER} } list_passwd())->[7];+ my $user = find { $_->[0] eq $ENV{USER} } list_passwd();
+ $home = $user->[7] if $user;
}
$home ||= $ENV{HOME}; #- consolehelper case
$home;