# translation of he.po to Hebrew
# translation of DrakX-he.po to hebrew
# translation of DrakX-he-new.po to Hebrew
# translation of DrakX-he.po to Hebrew
# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
# This file is distributed under the GNU GPL license.
# Ram Matityahu  <linuxfun@email.com>, 2003.
# nadav mavor <nadav@mavor.com>, 2003.
# el-cuco <cuco3001@yahoo.com>, 2003.
# Diego Iastrubni <iastrubn@actcom.co.il>, 2003.
# dovix <dovix2003@yahoo.com>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: he\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2004-10-07 21:57+0200\n"
"PO-Revision-Date: 2004-10-01 19:18+0200\n"
"Last-Translator: dovix <dovix2003@yahoo.com>\n"
"Language-Team: Hebrew <mdk-hebrew@iglu.org.il>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "איזה התקן זיכרון USB ברצונך להוסיף?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key isn't writable"
msgstr "התקן זיכרון ה USB אינו מאופשר לכתיבה"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "נסה שנית"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "המשך בלי התקן זיכרון USB"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1353
#, c-format
msgid "Reboot"
msgstr "הפעלה מחדש"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "נדרש התקן זיכרון USB לשמירת המידע שלך"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "ניסיון חוזר לזיהוי התקן זיכרון USB"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "הגדרת התקן זיכרון ה USB"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "נא להמתין, יוצר את קבצי הגדרת המערכת על התקן זיכרון ה USB..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "עליך להגדיר את מידע המשתמש שלך, הסיסמה תשמש עבור שומר המסך"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "הגדרות אוטומטיות"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "נא להמתין, מזהה ומגדיר התקנים..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:223
#: diskdrake/interactive.pm:236 diskdrake/interactive.pm:377
#: diskdrake/interactive.pm:392 diskdrake/interactive.pm:515
#: diskdrake/interactive.pm:520 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:167
#: install_steps.pm:82 install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:995 network/netconnect.pm:999
#: network/netconnect.pm:1004 network/netconnect.pm:1045
#: network/netconnect.pm:1049 network/netconnect.pm:1187
#: network/netconnect.pm:1192 network/netconnect.pm:1210
#: network/netconnect.pm:1393 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:1182
#: printer/printerdrake.pm:1229 printer/printerdrake.pm:1266
#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1314
#: printer/printerdrake.pm:1328 printer/printerdrake.pm:1418
#: printer/printerdrake.pm:1498 printer/printerdrake.pm:1502
#: printer/printerdrake.pm:1506 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1612 printer/printerdrake.pm:1616
#: printer/printerdrake.pm:1630 printer/printerdrake.pm:1740
#: printer/printerdrake.pm:1744 printer/printerdrake.pm:1781
#: printer/printerdrake.pm:1846 printer/printerdrake.pm:1864
#: printer/printerdrake.pm:1873 printer/printerdrake.pm:1882
#: printer/printerdrake.pm:1893 printer/printerdrake.pm:1955
#: printer/printerdrake.pm:2408 printer/printerdrake.pm:2672
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3192 printer/printerdrake.pm:3196
#: printer/printerdrake.pm:3606 printer/printerdrake.pm:3846
#: printer/printerdrake.pm:3866 printer/printerdrake.pm:3942
#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4123
#: standalone/drakTermServ:379 standalone/drakTermServ:731
#: standalone/drakTermServ:738 standalone/drakTermServ:933
#: standalone/drakTermServ:1403 standalone/drakTermServ:1408
#: standalone/drakTermServ:1415 standalone/drakTermServ:1426
#: standalone/drakTermServ:1447 standalone/drakauth:37
#: standalone/drakbackup:512 standalone/drakbackup:626
#: standalone/drakbackup:1128 standalone/drakbackup:1161
#: standalone/drakbackup:1665 standalone/drakbackup:1821
#: standalone/drakbackup:2416 standalone/drakbackup:4105
#: standalone/drakbackup:4325 standalone/drakbug:235 standalone/drakbug:254
#: standalone/drakbug:260 standalone/drakclock:125 standalone/drakconnect:648
#: standalone/drakconnect:651 standalone/drakconnect:670
#: standalone/drakfloppy:297 standalone/drakfloppy:301
#: standalone/drakfloppy:307 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:259 standalone/drakfont:604 standalone/draksplash:21
#: standalone/draksplash:501 standalone/drakxtv:107 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:196 standalone/scannerdrake:255
#: standalone/scannerdrake:684 standalone/scannerdrake:695
#: standalone/scannerdrake:834 standalone/scannerdrake:845
#: standalone/scannerdrake:915 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "שגיאה"

#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"חלה תקלה, אך איני יודע איך לפתור אותה.\n"
"המשך הפעולה הינו באחריותך בלבד."

#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "חלה שגיאה"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "הסרת קבצי הגדרת המערכת"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "אתחול מחדש"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "הפסקת פעולת תוכניות אלו"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "אין תמיכה ב CDROM"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1015
#: diskdrake/interactive.pm:1068
#, c-format
msgid "Read carefully!"
msgstr "יש לקרוא בעיון!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"אין באפשרותך להשתמש בתקליטור אחר כאשר תוכניות אלו מופעלות: \n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "העתקה לזיכרון על מנת לאפשר את הוצאת התקליטור"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB או יותר"

#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "שרת X"

#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "יש לבחור כרטיס מסך"

#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "הגדרת מספר צגים"

#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"המערכת שלך תומכת בהגדרת מספר צגים.\n"
"מה ברצונך לעשות?"

#: Xconfig/card.pm:255
#, c-format
msgid "Can't install Xorg package: %s"
msgstr "אין אפשרות להתקין חבילת שרת גרפי: %s"

#: Xconfig/card.pm:265
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "עליך לבחור את כמות הזיכרון של כרטיס המסך שלך"

#: Xconfig/card.pm:352
#, c-format
msgid "Xorg configuration"
msgstr "הגדרות Xorg"

#: Xconfig/card.pm:354
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "איזו גרסת שרת גרפי ברצונך להתקין?"

#: Xconfig/card.pm:387
#, c-format
msgid "Configure all heads independently"
msgstr "הגדרת כל הצגים בנפרד"

#: Xconfig/card.pm:388
#, c-format
msgid "Use Xinerama extension"
msgstr "השתמש בהרחבת Xinerama"

#: Xconfig/card.pm:393
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr ""

#: Xconfig/card.pm:405 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:412 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s עם תמיכה בהאצת תלת מימד בחומרה"

#: Xconfig/card.pm:414
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "כרטיסך יכול לתמוך בהאצת תלת מימד בחומרה עם Xorg %s."

#: Xconfig/card.pm:420
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s עם חומרה מאיצת תלת מימד נסיונית"

#: Xconfig/card.pm:422
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"הכרטיס זה תומך בהאצת תלת מימד בחומרה עם Xorg %s,\n"
"זהירות: זוהי גרסה ניסיונית העלולה לגרום למחשב שלך לקרוס."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:912
#, c-format
msgid "Custom"
msgstr "מותאם אישית"

#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:88 printer/printerdrake.pm:712
#: printer/printerdrake.pm:3937 printer/printerdrake.pm:4382
#: standalone/draksplash:120 standalone/harddrake2:265 standalone/logdrake:174
#: standalone/net_applet:160 standalone/scannerdrake:446
#, c-format
msgid "Quit"
msgstr "יציאה"

#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "כרטיס גרפי"

#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "מסך"

#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:222
#, c-format
msgid "Resolution"
msgstr "הפרדת מסך"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "בדיקה"

#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:418
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:494 standalone/drakfont:556 standalone/harddrake2:262
#, c-format
msgid "Options"
msgstr "אפשרויות"

#: Xconfig/main.pm:167
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""

#: Xconfig/main.pm:184
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"האם לשמור את השינויים?\n"
"ההגדרות הנוכחיות הן:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr ""

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "יש לבחור מסך"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "הכנס-הפעל"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "כללי"

#: Xconfig/monitor.pm:119 standalone/drakconnect:567 standalone/harddrake2:49
#: standalone/harddrake2:83
#, c-format
msgid "Vendor"
msgstr "יצרן"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "זיהוי הכנס-הפעל נכשלה. עליך לבחור את המסך באופן ידני"

#: Xconfig/monitor.pm:134
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"שני הפרמטרים הקריטיים הם קצב הרענון האנכי, שהוא\n"
"הקצב שבו כל המסך מתרענן, והכי חשוב קצב התזמון\n"
"האופקי, שהוא הקצב שבו השורות הנסרקות מוצגות.\n"
"\n"
"חשוב ביותר שלא יוגדר סוג מסך עם קצבי ריענון שמעבר:\n"
"ליכולות המסך שלך מאחר והדבר עלול לגרום נזק למסך. אם\n"
"המידע לא ידוע, עליך לבחור בתצורה זהירה ובסיסית יותר."

#: Xconfig/monitor.pm:141
#, c-format
msgid "Horizontal refresh rate"
msgstr "קצב רענון אופקי"

#: Xconfig/monitor.pm:142
#, c-format
msgid "Vertical refresh rate"
msgstr "קצב רענון אנכי"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 צבעים (8 סיביות)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 אלף צבעים (15 סיביות)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 אלף צבעים (16 סיביות)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 מיליון צבעים (24 סיביות)"

#: Xconfig/resolution_and_depth.pm:135
#, c-format
msgid "Resolutions"
msgstr "הפרדות מסך"

#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "נא לבחור את הפרדת המסך ועומק הצבע"

#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "כרטיס מסך: %s"

#: Xconfig/resolution_and_depth.pm:284 interactive.pm:403
#: interactive/gtk.pm:766 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:201 standalone/drakTermServ:474
#: standalone/drakbackup:3962 standalone/drakbackup:4022
#: standalone/drakbackup:4066 standalone/drakconnect:165
#: standalone/drakconnect:850 standalone/drakconnect:937
#: standalone/drakconnect:1036 standalone/drakfont:577 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:345 ugtk2.pm:417 ugtk2.pm:515
#: ugtk2.pm:1122 ugtk2.pm:1145
#, c-format
msgid "Ok"
msgstr "אישור"

#: Xconfig/resolution_and_depth.pm:284 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:412
#: install_steps_interactive.pm:840 interactive.pm:404 interactive/gtk.pm:770
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3266
#: standalone/drakautoinst:217 standalone/drakbackup:3888
#: standalone/drakbackup:3892 standalone/drakbackup:3950
#: standalone/drakconnect:164 standalone/drakconnect:935
#: standalone/drakconnect:1035 standalone/drakfont:667 standalone/drakfont:744
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:344
#: ugtk2.pm:411 ugtk2.pm:513 ugtk2.pm:522 ugtk2.pm:1122
#, c-format
msgid "Cancel"
msgstr "ביטול"

#: Xconfig/resolution_and_depth.pm:284 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:239 install_steps_gtk.pm:644 interactive.pm:498
#: interactive/gtk.pm:628 interactive/gtk.pm:630 standalone/drakTermServ:280
#: standalone/drakbackup:3884 standalone/drakbug:128
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:337
#: standalone/draksec:339 standalone/draksec:357 standalone/draksec:359
#: standalone/harddrake2:261 ugtk2.pm:1235 ugtk2.pm:1236
#, c-format
msgid "Help"
msgstr "עזרה"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "בדיקת התצורה"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "האם ברצונך לבדוק את ההגדרות?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "אזהרה: בדיקת כרטיס המסך הזה עלולה לתקוע לך את המחשב"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"חלה שגיאה בעת יישום ההגדרות:\n"
"%s\n"
"יש לנסות לשנות מספר פרמטרים"

#: Xconfig/test.pm:133
#, c-format
msgid "Leaving in %d seconds"
msgstr "הבדיקה תסתיים בעוד %d שניות"

#: Xconfig/test.pm:133
#, c-format
msgid "Is this the correct setting?"
msgstr "האם ההגדרות תקינות?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "פריסת מקלדת: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "סוג עכבר: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "התקן עכבר: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "מסך: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "רענון אופקי של המסך: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "רענון אנכי של המסך: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "כרטיס מסך: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "זיכרון כרטיס מסך: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "עומק צבע: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "הפרדת מסך: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "מנהל התקן Xorg %s: \n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "הפעלת ממשק גרפי באתחול המחשב"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"ניתן להגדיר הפעלה אוטומטית של הממשק הגרפי\n"
"בעת הפעלת המחשב (מומלץ). עליך לבחור האם\n"
"להפעיל את הממשק הגרפי בזמן הפעלת המחשב:"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "באיזה תקן שידור הטלוויזיה שלך משתמשת?"

#: any.pm:116 harddrake/sound.pm:170 interactive.pm:441 standalone/drakbug:227
#: standalone/drakconnect:167 standalone/drakconnect:611 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:211
#: standalone/service_harddrake:199
#, c-format
msgid "Please wait"
msgstr "נא להמתין"

#: any.pm:116
#, c-format
msgid "Bootloader installation in progress"
msgstr "התקנת מנהל האתחול"

#: any.pm:127
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:138
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "התקנת מנהל האתחול נכשלה. השגיאות הבאות התרחשו:"

#: any.pm:144
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:181
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"החלטת להתקין את מנהל האתחול על מחיצה.\n"
"חשוב לוודא שיש לך כבר מנהל אתחול כלשהו (כגון System Commander)\n"
"\n"
"מהו הכונן ממנו נטענת המערכת? "

#: any.pm:204 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "מקטע ראשון של הכונן (MBR)"

#: any.pm:205
#, c-format
msgid "First sector of the root partition"
msgstr "מקטע ראשון של מחיצת השורש"

#: any.pm:207
#, c-format
msgid "On Floppy"
msgstr "על התקליטון"

#: any.pm:209 help.pm:739 printer/printerdrake.pm:3603
#, c-format
msgid "Skip"
msgstr "דילוג"

#: any.pm:213
#, c-format
msgid "LILO/grub Installation"
msgstr "התקנת LILO/grub"

#: any.pm:214
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "איפה ברצונך להתקין את מנהל האתחול?"

#: any.pm:239 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "הגדרת סגנון מנהל אתחול"

#: any.pm:241 any.pm:275
#, c-format
msgid "Bootloader main options"
msgstr "הגדרות עיקריות של מנהל האתחול"

#: any.pm:245
#, c-format
msgid "Give the ram size in MB"
msgstr "יש להגדיראת גודל הזיכרון בMB"

#: any.pm:247
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "אפשרות ''הגבלת אפשרויות שורת הפקודה'' לא שימושית ללא הגדרת סיסמה"

#: any.pm:248 any.pm:586 install_steps_interactive.pm:1215
#, c-format
msgid "The passwords do not match"
msgstr "הסיסמאות לא זהות"

#: any.pm:248 any.pm:586 diskdrake/interactive.pm:1261
#: install_steps_interactive.pm:1215
#, c-format
msgid "Please try again"
msgstr "יש לנסות שנית"

#: any.pm:253 any.pm:278
#, c-format
msgid "Bootloader to use"
msgstr "מנהל אתחול (ברירת מחדל):"

#: any.pm:255 any.pm:280
#, c-format
msgid "Boot device"
msgstr "מחיצת האתחול (ברירת מחדל):"

#: any.pm:257
#, c-format
msgid "Delay before booting default image"
msgstr "השהייה לפני אתחול תצורה זו (שניות):"

#: any.pm:258
#, c-format
msgid "Enable ACPI"
msgstr "הפעלת ACPI (ניהול צריכת אנרגיה מתקדמת)"

#: any.pm:260
#, c-format
msgid "Force no APIC"
msgstr "הפעלה ללא APIC (בקר פסיקות מתוכנת מתקדם)"

#: any.pm:262
#, c-format
msgid "Force No Local APIC"
msgstr "הפעלה ללא APIC מקומי (בקר פסיקות מתוכנת מתקדם)"

#: any.pm:264 any.pm:613 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1220 network/netconnect.pm:595
#: printer/printerdrake.pm:1489 printer/printerdrake.pm:1609
#: standalone/drakbackup:1647 standalone/drakbackup:3490
#: standalone/drakups:295
#, c-format
msgid "Password"
msgstr "סיסמה"

#: any.pm:265 any.pm:614 install_steps_interactive.pm:1221
#, c-format
msgid "Password (again)"
msgstr "סיסמה (שוב)"

#: any.pm:266
#, c-format
msgid "Restrict command line options"
msgstr "הגבלת אפשרויות שורת הפקודה"

#: any.pm:266
#, c-format
msgid "restrict"
msgstr "הגבלה"

#: any.pm:268
#, c-format
msgid "Clean /tmp at each boot"
msgstr "ניקוי קבצים זמניים בספריית tmp/ בכל אתחול"

#: any.pm:269
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "הגדרת זיכרון ידנית (נמצאו %d MB)"

#: any.pm:279
#, c-format
msgid "Init Message"
msgstr "הודעת אתחול"

#: any.pm:281
#, c-format
msgid "Open Firmware Delay"
msgstr ""

#: any.pm:282
#, c-format
msgid "Kernel Boot Timeout"
msgstr "משך המתנה מירבי לאתחול גרעין"

#: any.pm:283
#, c-format
msgid "Enable CD Boot?"
msgstr "האם לאפשר אתחול מתקליטור?"

#: any.pm:284
#, c-format
msgid "Enable OF Boot?"
msgstr ""

#: any.pm:285
#, c-format
msgid "Default OS?"
msgstr "מהי מערכת הפעלה שתיטען כברירת מחדל?"

#: any.pm:338
#, c-format
msgid "Image"
msgstr "תצורה"

#: any.pm:339 any.pm:349
#, c-format
msgid "Root"
msgstr "מנהל מערכת (root)"

#: any.pm:340 any.pm:362
#, c-format
msgid "Append"
msgstr "הוספה"

#: any.pm:342 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "תצורת תצוגה"

#: any.pm:344
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:345
#, c-format
msgid "Network profile"
msgstr "תצורת רשת"

#: any.pm:354 any.pm:359 any.pm:361
#, c-format
msgid "Label"
msgstr "תווית"

#: any.pm:356 any.pm:366 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "ברירת מחדל"

#: any.pm:363
#, c-format
msgid "Initrd-size"
msgstr "גודל Initrd"

#: any.pm:365
#, c-format
msgid "NoVideo"
msgstr "ללא תצוגה"

#: any.pm:376
#, c-format
msgid "Empty label not allowed"
msgstr "אסור להגדיר תווית שם ריקה"

#: any.pm:377
#, c-format
msgid "You must specify a kernel image"
msgstr "חובה להגדיר תמונת גרעין"

#: any.pm:377
#, c-format
msgid "You must specify a root partition"
msgstr "חובה להגדיר מחיצת שורש"

#: any.pm:378
#, c-format
msgid "This label is already used"
msgstr "התווית הזאת כבר בשימוש"

#: any.pm:392
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "איזה סוג כניסה ברצונך להוסיף?"

#: any.pm:393
#, c-format
msgid "Linux"
msgstr "לינוקס"

#: any.pm:393
#, c-format
msgid "Other OS (SunOS...)"
msgstr "מערכת הפעלה אחרת (SunOS...)"

#: any.pm:394
#, c-format
msgid "Other OS (MacOS...)"
msgstr "מערכת הפעלה אחרת (MacOS...)"

#: any.pm:394
#, c-format
msgid "Other OS (Windows...)"
msgstr "מערכת הפעלה אחרת (חלונות...)"

#: any.pm:422
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"להלן הרשומות שהוגדרו כבר בתפריט האתחול\n"
"ניתן להוסיף רשומות או לשנות רשומות קיימות."

#: any.pm:572
#, c-format
msgid "access to X programs"
msgstr "גישה ליישומים גרפיים"

#: any.pm:573
#, c-format
msgid "access to rpm tools"
msgstr "גישה לכלי התקנת תוכנה"

#: any.pm:574
#, c-format
msgid "allow \"su\""
msgstr "איפשור שינוי למנהל מערכת (\"su\")"

#: any.pm:575
#, c-format
msgid "access to administrative files"
msgstr "אפשרות גישה לקבצי ניהול"

#: any.pm:576
#, c-format
msgid "access to network tools"
msgstr "אפשרות גישה לכלי רשת"

#: any.pm:577
#, c-format
msgid "access to compilation tools"
msgstr "אפשרות גישה לכלי הידור"

#: any.pm:582
#, c-format
msgid "(already added %s)"
msgstr "(כבר נוסף %s)"

#: any.pm:587
#, c-format
msgid "This password is too simple"
msgstr "הסיסמה פשוטה מדי"

#: any.pm:588
#, c-format
msgid "Please give a user name"
msgstr "עליך להגדיר שם משתמש"

#: any.pm:589
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "שם המשתמש יכול להכיל אך ורק אותיות קטנות, מספרים, `-' ו `_'"

#: any.pm:590
#, c-format
msgid "The user name is too long"
msgstr "שם המשתמש ארוך מדי"

#: any.pm:591
#, c-format
msgid "This user name has already been added"
msgstr "שם משתמש זה כבר קיים"

#: any.pm:595
#, c-format
msgid "Add user"
msgstr "הוספת משתמש"

#: any.pm:596
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"הגדרת משתמש\n"
"%s"

#: any.pm:599 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:191
#: printer/printerdrake.pm:376 printer/printerdrake.pm:4382
#: standalone/drakbackup:2703 standalone/scannerdrake:637
#: standalone/scannerdrake:787
#, c-format
msgid "Done"
msgstr "סיום"

#: any.pm:600 help.pm:51
#, c-format
msgid "Accept user"
msgstr "שמירת משתמש"

#: any.pm:611
#, c-format
msgid "Real name"
msgstr "שם אמיתי"

#: any.pm:612 standalone/drakbackup:1642
#, c-format
msgid "Login name"
msgstr "שם משתמש"

#: any.pm:615
#, c-format
msgid "Shell"
msgstr "מעטפת"

#: any.pm:617
#, c-format
msgid "Icon"
msgstr "סמל"

#: any.pm:664 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "כניסה-אוטומטית"

#: any.pm:665
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"יש אפשרות לכך שכאשר המערכת תופעל היא תכנס אוטומטית לחשבון של אחד המשתמשים."

#: any.pm:666 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "האם להפעיל אפשרות זו?"

#: any.pm:667
#, c-format
msgid "Choose the default user:"
msgstr "בחירת משתמש ברירת המחדל: "

#: any.pm:668
#, c-format
msgid "Choose the window manager to run:"
msgstr "יש לבחור את מנהל החלונות:"

#: any.pm:680
#, c-format
msgid "Please choose a language to use."
msgstr "יש לבחור את השפה העיקרית."

#: any.pm:681
#, c-format
msgid "Language choice"
msgstr "בחירת שפה"

#: any.pm:707
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"מנדרייק-לינוקס יכולה לתמוך בריבוי שפות. עליך לבחור\n"
"את השפות שברצונך להתקין. השפות יהיו זמינות כאשר\n"
"ההתקנה תסתיים והמחשב יופעל מחדש."

#: any.pm:725 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "שימוש ביוניקוד בתור ברירת מחדל"

#: any.pm:726 help.pm:647
#, c-format
msgid "All languages"
msgstr "כל השפות"

#: any.pm:765 help.pm:566 help.pm:855 install_steps_interactive.pm:960
#, c-format
msgid "Country / Region"
msgstr "מדינה / אזור"

#: any.pm:766
#, c-format
msgid "Please choose your country."
msgstr "עליך לבחור את המדינה שלך."

#: any.pm:768
#, c-format
msgid "Here is the full list of available countries"
msgstr "להלן הרשימה המלאה של המדינות הזמינות"

#: any.pm:769
#, c-format
msgid "Other Countries"
msgstr "מדינות אחרות"

#: any.pm:777
#, c-format
msgid "Input method:"
msgstr "שיטת קלט:"

#: any.pm:778 install_any.pm:420 printer/printerdrake.pm:99
#, c-format
msgid "None"
msgstr "כלום"

#: any.pm:912
#, c-format
msgid "No sharing"
msgstr "ללא שיתוף"

#: any.pm:912
#, c-format
msgid "Allow all users"
msgstr "הרשה לכל המשתמשים"

#: any.pm:916
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"האם ברצונך לאפשר למשתמשים לשתף חלק מהספריות שלהם?\n"
"הסכמתך לעשות זאת תאפשר למשתמשים ללחוץ על \"שתף\" ב-Konqueror וב-Nautilus.\n"
"\n"
"\" התאמה אישית\" תאפשר התאמה לכל משתמש.\n"

#: any.pm:928
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:931
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:939
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "ניתן לייצא בעזרת NFS או SMB. עליך לבחור במה להשתמש."

#: any.pm:964
#, c-format
msgid "Launch userdrake"
msgstr "הפעלת userdrake"

#: any.pm:964 printer/printerdrake.pm:3478 printer/printerdrake.pm:3481
#: printer/printerdrake.pm:3482 printer/printerdrake.pm:3483
#: printer/printerdrake.pm:4676 standalone/drakTermServ:289
#: standalone/drakbackup:4084 standalone/drakbug:151 standalone/drakfont:500
#: standalone/drakfont:594 standalone/net_monitor:123
#: standalone/printerdrake:559
#, c-format
msgid "Close"
msgstr "סגור"

#: any.pm:966
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"השיתוף לכל משתמש, משתמש בהגדרתקבוצה \"שיתוף-קבצים\".\n"
"ביכולתך להשתמש בעורך המשתמשים כדי להוסיף משתמשים לקבוצה זו."

#: authentication.pm:16
#, c-format
msgid "Local file"
msgstr "קובץ מקומי"

#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:19 authentication.pm:127
#, c-format
msgid "Windows Domain"
msgstr "Windows Domain"

#: authentication.pm:20
#, c-format
msgid "Active Directory with SFU"
msgstr "Active Directory עם SFU"

#: authentication.pm:21
#, c-format
msgid "Active Directory with Winbind"
msgstr "Active Directory עם Winbind"

#: authentication.pm:30
#, c-format
msgid "Local file:"
msgstr "קובץ מקומי:"

#: authentication.pm:30
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:31
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:31
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:32
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:32
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:33
#, c-format
msgid "Windows Domain:"
msgstr "Windows Domain:"

#: authentication.pm:33
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""

#: authentication.pm:34
#, c-format
msgid "Active Directory with SFU:"
msgstr "Active Directory עם SFU:"

#: authentication.pm:34 authentication.pm:35
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""

#: authentication.pm:35
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Active Directory עם Winbind:"

#: authentication.pm:60
#, c-format
msgid "Authentication LDAP"
msgstr ""

#: authentication.pm:61
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:62 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "שרת LDAP"

#: authentication.pm:75 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "פשוט"

#: authentication.pm:76
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:77
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:78
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "שיטת אבטחה (SASL/Kerberos)"

#: authentication.pm:85 authentication.pm:123
#, c-format
msgid "Authentication Active Directory"
msgstr ""

#: authentication.pm:86 authentication.pm:125 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "מתחם"

#: authentication.pm:88 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:135 share/compssUsers.pl:81
#, c-format
msgid "Server"
msgstr "שרת"

#: authentication.pm:89
#, c-format
msgid "LDAP users database"
msgstr "בסיס נתוני משתמשים LDAP"

#: authentication.pm:90
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:91
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:92
#, c-format
msgid "Password for user"
msgstr "סיסמה עבור המשתמש"

#: authentication.pm:93
#, c-format
msgid "Encryption"
msgstr "הצפנה"

#: authentication.pm:104
#, c-format
msgid "Authentication NIS"
msgstr ""

#: authentication.pm:105
#, c-format
msgid "NIS Domain"
msgstr "מתחם NIS"

#: authentication.pm:106
#, c-format
msgid "NIS Server"
msgstr "שרת NIS"

#: authentication.pm:111
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:123
#, c-format
msgid "Authentication Windows Domain"
msgstr "אימות של Windows Domain"

#: authentication.pm:128
#, c-format
msgid "Domain Admin User Name"
msgstr "שם מהשתמש של מנהל המתחם"

#: authentication.pm:129
#, c-format
msgid "Domain Admin Password"
msgstr "סיסמת מנהל המתחם"

#: authentication.pm:130
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""

#: authentication.pm:131
#, c-format
msgid "Default Idmap "
msgstr "ברירת מחדל Idmap "

#: authentication.pm:231
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "לא יכול להשתמש בשידור מתפרץ ללא הגדרת מתחם NIS"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:673
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"

#: bootloader.pm:787
#, c-format
msgid "LILO with graphical menu"
msgstr "'לילו' עם תפריט גרפי"

#: bootloader.pm:788
#, c-format
msgid "LILO with text menu"
msgstr "'לילו' עם תפריט טקסט"

#: bootloader.pm:789
#, c-format
msgid "Grub"
msgstr "'גראב'"

#: bootloader.pm:790
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:852
#, c-format
msgid "not enough room in /boot"
msgstr "אין מספיק מקום ב-/boot"

#: bootloader.pm:1266
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "אי אפשר להתקין את מנהל האתחול על המחיצה %s\n"

#: bootloader.pm:1311
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr "יש צורך בעדכון תצורת טוען המערכת שלך מאחר ושונו מספרי מחיצות"

#: bootloader.pm:1326
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"אין אפשרות להתקין את טוען המערכת באופן תקין. עליך להפעיל את המערכת עם פרמטר "
"rescue ולבחור \"%s\""

#: bootloader.pm:1327
#, c-format
msgid "Re-install Boot Loader"
msgstr "התקנה חוזרת של מנהל האתחול"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d דקות"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "דקה אחת"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d שניות"

#: common.pm:197
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "אין אפשרות לשמור תמונות מסך לפני חלוקה למחיצות"

#: common.pm:204
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "ניתן למצוא את תמונות המסך אחרי התקנה ב%s"

#: common.pm:269
#, c-format
msgid "kdesu missing"
msgstr "חסר kdesu"

#: common.pm:272
#, c-format
msgid "consolehelper missing"
msgstr "עוזר-המעטפת חסר (consolehelper)"

#: crypto.pm:14 crypto.pm:28 lang.pm:254 network/adsl_consts.pm:309
#: network/adsl_consts.pm:320 network/adsl_consts.pm:330
#: network/adsl_consts.pm:340 network/adsl_consts.pm:350
#: network/adsl_consts.pm:361 network/adsl_consts.pm:372
#: network/adsl_consts.pm:382 network/adsl_consts.pm:392
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "צרפת"

#: crypto.pm:15 lang.pm:229
#, c-format
msgid "Costa Rica"
msgstr "קוסטה ריקה"

#: crypto.pm:16 crypto.pm:29 lang.pm:201 network/adsl_consts.pm:59
#: network/adsl_consts.pm:66 network/adsl_consts.pm:77
#: network/adsl_consts.pm:85 network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "בלגיה"

#: crypto.pm:17 crypto.pm:30 lang.pm:235
#, c-format
msgid "Czech Republic"
msgstr "הרפובליקה הצ'כית"

#: crypto.pm:18 crypto.pm:31 lang.pm:236 network/adsl_consts.pm:410
#: network/adsl_consts.pm:418
#, c-format
msgid "Germany"
msgstr "גרמניה"

#: crypto.pm:19 crypto.pm:32 lang.pm:267 network/adsl_consts.pm:428
#, c-format
msgid "Greece"
msgstr "יוון"

#: crypto.pm:20 crypto.pm:33 lang.pm:340
#, c-format
msgid "Norway"
msgstr "נורווגיה"

#: crypto.pm:21 crypto.pm:34 lang.pm:369 network/adsl_consts.pm:561
#, c-format
msgid "Sweden"
msgstr "שבדיה"

#: crypto.pm:22 crypto.pm:36 lang.pm:339 network/adsl_consts.pm:495
#: network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "הולנד"

#: crypto.pm:23 crypto.pm:37 lang.pm:287 network/adsl_consts.pm:452
#: network/adsl_consts.pm:462 network/adsl_consts.pm:469
#: network/netconnect.pm:49 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "איטליה"

#: crypto.pm:24 crypto.pm:38 lang.pm:194 network/adsl_consts.pm:36
#: network/adsl_consts.pm:44 network/adsl_consts.pm:52
#, c-format
msgid "Austria"
msgstr "אוסטריה"

#: crypto.pm:35 crypto.pm:65 lang.pm:403 network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "ארצות הברית"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"פרוטוקול WebDAV מאפשר לך לעגן בנקודות חיבור תיקיות של שרתי אינטרנט\n"
" באופן מקומי, ולהתייחס אליהם כמערכת קבצים מקומית (בתנאי ששרת האינטרנט\n"
"מוגדר כשרת WebDAV). אם ברצונך להוסיף נקודת חיבור WebDAV,\n"
"בחר \"חדש\"."

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "חדש"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:425 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "ניתוק"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:422 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "עיגון"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:416
#: diskdrake/interactive.pm:627 diskdrake/interactive.pm:646
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "נקודת עיגון"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "נא להכניס את כתובת שרת ה-WevDAV"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "שם האתר חייב להתחיל בhttp:// או בhttps://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "שרת:"

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:479
#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1232
#, c-format
msgid "Mount point: "
msgstr "נקודת עיגון: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1239
#, c-format
msgid "Options: %s"
msgstr "אפשרויות: %s"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "יש לגבות את המידע שעל המערכת לפני ביצוע פעולה זו"

#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"אם ברצונך להשתמש ב-aboot, עליך להקפיד להשאיר מקום פנוי (2048 מקטעים "
"יספיקו) \n"
"בתחילת הכונן"

#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "אשף"

#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "יש לבחור פעולה"

#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"המערכת שלך משתמשת במחיצת חלונות גדולה יחידה.\n"
"מומלץ לשנות את גודל המחיצה בתור פעולה ראשונה\n"
"(עליך לבחור את המחיצה, ואז ללחוץ על \"שינוי גודל\")"

#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "יש לבחור מחיצה"

#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:474
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr "פרטים"

#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "לא נמצאו כוננים קשיחים"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Swap"
msgstr "זיכרון החלפה"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Windows"
msgstr "חלונות"

#: diskdrake/hd_gtk.pm:326 install_steps_gtk.pm:298 mouse.pm:168
#: services.pm:164 standalone/drakbackup:1603 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "אחר"

#: diskdrake/hd_gtk.pm:326 diskdrake/interactive.pm:1172
#, c-format
msgid "Empty"
msgstr "ריק"

#: diskdrake/hd_gtk.pm:330
#, c-format
msgid "Filesystem types:"
msgstr "סוגי מערכות קבצים:"

#: diskdrake/hd_gtk.pm:347 diskdrake/hd_gtk.pm:349 diskdrake/hd_gtk.pm:352
#, c-format
msgid "Use ``%s'' instead"
msgstr "השתמש ב''%s'' במקום"

#: diskdrake/hd_gtk.pm:347 diskdrake/hd_gtk.pm:352
#: diskdrake/interactive.pm:417 diskdrake/interactive.pm:580
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:101
#, c-format
msgid "Type"
msgstr "סוג"

#: diskdrake/hd_gtk.pm:347 diskdrake/interactive.pm:441
#, c-format
msgid "Create"
msgstr "יצירה"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:349 diskdrake/interactive.pm:426
#: standalone/drakperm:124 standalone/printerdrake:242
#, c-format
msgid "Delete"
msgstr "מחיקה"

#: diskdrake/hd_gtk.pm:352
#, c-format
msgid "Use ``Unmount'' first"
msgstr "נא לבחור קודם כל ב\"ניתוק\""

#: diskdrake/interactive.pm:187
#, c-format
msgid "Choose another partition"
msgstr "נא לבחור מחיצה אחרת"

#: diskdrake/interactive.pm:187
#, c-format
msgid "Choose a partition"
msgstr "יש לבחור מחיצה"

#: diskdrake/interactive.pm:216
#, c-format
msgid "Exit"
msgstr "יציאה"

#: diskdrake/interactive.pm:249 help.pm:530
#, c-format
msgid "Undo"
msgstr "בטל"

#: diskdrake/interactive.pm:249
#, c-format
msgid "Toggle to normal mode"
msgstr "עבור למצב רגיל"

#: diskdrake/interactive.pm:249
#, c-format
msgid "Toggle to expert mode"
msgstr "עבור למצב מומחה"

#: diskdrake/interactive.pm:268
#, c-format
msgid "Continue anyway?"
msgstr "האם להמשיך בכל זאת?"

#: diskdrake/interactive.pm:273
#, c-format
msgid "Quit without saving"
msgstr "יציאה ללא שמירה"

#: diskdrake/interactive.pm:273
#, c-format
msgid "Quit without writing the partition table?"
msgstr "האם לצאת בלי לשמור את טבלת המחיצות?"

#: diskdrake/interactive.pm:278
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "האם ברצונך לשמור את שינויי /etc/fstab"

#: diskdrake/interactive.pm:285 install_steps_interactive.pm:313
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "יש צורך בהפעלת המחשב מחדש בכדי שהשינויים בטבלת המחיצות יכנסו לתוקף"

#: diskdrake/interactive.pm:298 help.pm:530
#, c-format
msgid "Clear all"
msgstr "נקה הכל"

#: diskdrake/interactive.pm:299 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "הקצבה אוטומטית"

#: diskdrake/interactive.pm:300 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:124
#, c-format
msgid "More"
msgstr "מתקדם"

#: diskdrake/interactive.pm:305
#, c-format
msgid "Hard drive information"
msgstr "מידע על הכונן הקשיח"

#: diskdrake/interactive.pm:337
#, c-format
msgid "All primary partitions are used"
msgstr "כל המחיצות הראשיות בשימוש"

#: diskdrake/interactive.pm:338
#, c-format
msgid "I can't add any more partitions"
msgstr "אין אפשרות להוסיף מחיצות נוספות"

#: diskdrake/interactive.pm:339
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"כדי לאפשר יצירת מחיצות חדשות, נא למחוק אחת כדי לאפשר הגדרת מחיצה מורחבת"

#: diskdrake/interactive.pm:350 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "שמור את טבלת המחיצות"

#: diskdrake/interactive.pm:351 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "שחזר את טבלת המחיצות"

#: diskdrake/interactive.pm:352 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "הצל את טבלת המחיצות"

#: diskdrake/interactive.pm:354 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "טען מחדש את טבלת המחיצות"

#: diskdrake/interactive.pm:356
#, c-format
msgid "Removable media automounting"
msgstr "עיגון אוטומטי של התקן-נשלף"

#: diskdrake/interactive.pm:365 diskdrake/interactive.pm:385
#, c-format
msgid "Select file"
msgstr "יש לבחור קובץ"

#: diskdrake/interactive.pm:372
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"גיבוי טבלת המחיצות אינה תואמת בגודלה\n"
"האם להמשיך בכל זאת?"

#: diskdrake/interactive.pm:386 harddrake/sound.pm:246 keyboard.pm:351
#: lang.pm:1046 network/netconnect.pm:470 printer/printerdrake.pm:1037
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2075
#: printer/printerdrake.pm:2110 printer/printerdrake.pm:2414
#: printer/printerdrake.pm:3330 printer/printerdrake.pm:3611
#: printer/printerdrake.pm:3733 printer/printerdrake.pm:4823
#: standalone/drakTermServ:315 standalone/drakTermServ:1045
#: standalone/drakTermServ:1101 standalone/drakTermServ:1769
#: standalone/drakbackup:511 standalone/drakbackup:610 standalone/drakboot:165
#: standalone/drakclock:225 standalone/drakconnect:972
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/scannerdrake:51
#: standalone/scannerdrake:909
#, c-format
msgid "Warning"
msgstr "אזהרה"

#: diskdrake/interactive.pm:387
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"נא להכניס תקליטון לכונן\n"
"כל המידע על תקליטון זה יאבד"

#: diskdrake/interactive.pm:398
#, c-format
msgid "Trying to rescue partition table"
msgstr "מנסה להציל את טבלת המחיצות"

#: diskdrake/interactive.pm:404
#, c-format
msgid "Detailed information"
msgstr "מידע מפורט"

#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:717
#, c-format
msgid "Resize"
msgstr "שנה גודל"

#: diskdrake/interactive.pm:420 diskdrake/interactive.pm:783
#, c-format
msgid "Move"
msgstr "העבר"

#: diskdrake/interactive.pm:421
#, c-format
msgid "Format"
msgstr "יצירת מערכת קבצים (Format)"

#: diskdrake/interactive.pm:423
#, c-format
msgid "Add to RAID"
msgstr "הוספה ל-RAID"

#: diskdrake/interactive.pm:424
#, c-format
msgid "Add to LVM"
msgstr "הוספה ל-LVM"

#: diskdrake/interactive.pm:427
#, c-format
msgid "Remove from RAID"
msgstr "הסרה מ-RAID"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Remove from LVM"
msgstr "הסרה מ-LVM"

#: diskdrake/interactive.pm:429
#, c-format
msgid "Modify RAID"
msgstr "שינוי RAID"

#: diskdrake/interactive.pm:430
#, c-format
msgid "Use for loopback"
msgstr "שימוש כ loopback"

#: diskdrake/interactive.pm:472
#, c-format
msgid "Create a new partition"
msgstr "יצרת מחיצה חדשה"

#: diskdrake/interactive.pm:475
#, c-format
msgid "Start sector: "
msgstr "מקטע התחלה:"

#: diskdrake/interactive.pm:477 diskdrake/interactive.pm:884
#, c-format
msgid "Size in MB: "
msgstr "גודל ב-MB: "

#: diskdrake/interactive.pm:478 diskdrake/interactive.pm:885
#, c-format
msgid "Filesystem type: "
msgstr "סוג מערכת קבצים: "

#: diskdrake/interactive.pm:483
#, c-format
msgid "Preference: "
msgstr "העדפות: "

#: diskdrake/interactive.pm:486
#, c-format
msgid "Logical volume name "
msgstr "שם מחיצה לוגית "

#: diskdrake/interactive.pm:515
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"אין באפשרותך ליצור מחיצה חדשה\n"
"(מאחר והגעת למספר המירבי של מחיצות ראשיות)\n"
"עליך להסיר מחיצה ראשית ואז ליצור מחיצה מורחבת"

#: diskdrake/interactive.pm:545
#, c-format
msgid "Remove the loopback file?"
msgstr "מחיקת קובץ ה-loopback?"

#: diskdrake/interactive.pm:564
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "אחרי שינוי סוג של מחיצה %s, כל המידע שעליה יאבד"

#: diskdrake/interactive.pm:576
#, c-format
msgid "Change partition type"
msgstr "שנה סוג מחיצה"

#: diskdrake/interactive.pm:577 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "באיזו מערכת קבצים יש להשתמש?"

#: diskdrake/interactive.pm:585
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "מחליף מ-ext2 ל-ext3"

#: diskdrake/interactive.pm:614
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "איפה ברצונך לעגן את קובץ הloopback ששמו %s?"

#: diskdrake/interactive.pm:615
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "לאן ברצונך לעגן את ההתקן %s?"

#: diskdrake/interactive.pm:620
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"אין אפשרות להסיר את נקודת העיגון מאחר ומחיצה זו משמשת ל-loopback.\n"
"עליך להסיר בשלב ראשון את ה-loopback"

#: diskdrake/interactive.pm:645
#, c-format
msgid "Where do you want to mount %s?"
msgstr "לאן ברצונך לעגן את %s?"

#: diskdrake/interactive.pm:669 diskdrake/interactive.pm:748
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "משנה גודל"

#: diskdrake/interactive.pm:669
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "מחשב תחומי מערכת קבצים מסוג FAT"

#: diskdrake/interactive.pm:705
#, c-format
msgid "This partition is not resizeable"
msgstr "לא ניתן לשנות את גודלה של מחיצה זו"

#: diskdrake/interactive.pm:710
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "יש לגבות את כל המידע שעל מחיצה זו"

#: diskdrake/interactive.pm:712
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "אחרי שינוי הגודל של המחיצה %s, כל המידע על מחיצה זו יאבד"

#: diskdrake/interactive.pm:717
#, c-format
msgid "Choose the new size"
msgstr "יש לבחור את הגודל החדש"

#: diskdrake/interactive.pm:718
#, c-format
msgid "New size in MB: "
msgstr "גודל חדש ב-MB: "

#: diskdrake/interactive.pm:761 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"על מנת להבטיח את שלמות הנתונים אחרי שינוי גודל המחיצה(ות) \n"
"תןפעל בדיקה של מערכת הקבצים באתחול הבא של חלונות"

#: diskdrake/interactive.pm:784
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "לאיזה כונן ברצונך להעביר את זה?"

#: diskdrake/interactive.pm:785
#, c-format
msgid "Sector"
msgstr "מקטע"

#: diskdrake/interactive.pm:786
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "לאיזה מקטע ברצונך להעביר את זה?"

#: diskdrake/interactive.pm:789
#, c-format
msgid "Moving"
msgstr "מעביר"

#: diskdrake/interactive.pm:789
#, c-format
msgid "Moving partition..."
msgstr "מעביר מחיצה..."

#: diskdrake/interactive.pm:810
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "יש לבחור RAID קיים אליו יש להוסיף"

#: diskdrake/interactive.pm:812 diskdrake/interactive.pm:828
#, c-format
msgid "new"
msgstr "חדש"

#: diskdrake/interactive.pm:826
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "יש לבחור LVM קיים אליו יש להוסיף"

#: diskdrake/interactive.pm:832
#, c-format
msgid "LVM name?"
msgstr "שם LVM?"

#: diskdrake/interactive.pm:869
#, c-format
msgid "This partition can't be used for loopback"
msgstr "לא יכול לעשות שימוש במחיצה זאת עבור loopback"

#: diskdrake/interactive.pm:882
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:883
#, c-format
msgid "Loopback file name: "
msgstr "שם קובץ loopback: "

#: diskdrake/interactive.pm:888
#, c-format
msgid "Give a file name"
msgstr "עליך להגדיר שם קובץ"

#: diskdrake/interactive.pm:891
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "הקובץ בשימוש loopback אחר, נא לבחור קובץ אחר."

#: diskdrake/interactive.pm:892
#, c-format
msgid "File already exists. Use it?"
msgstr "קובץ זה כבר קיים. האם להשתמש בו?"

#: diskdrake/interactive.pm:915
#, c-format
msgid "Mount options"
msgstr "אפשרויות עיגון"

#: diskdrake/interactive.pm:922
#, c-format
msgid "Various"
msgstr "שונות"

#: diskdrake/interactive.pm:987
#, c-format
msgid "device"
msgstr "התקן"

#: diskdrake/interactive.pm:988
#, c-format
msgid "level"
msgstr "רמה"

#: diskdrake/interactive.pm:989
#, c-format
msgid "chunk size in KiB"
msgstr "גודל חתיכה ב KiB"

#: diskdrake/interactive.pm:1006
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "זהירות: פעולה זו מסוכנת."

#: diskdrake/interactive.pm:1021
#, c-format
msgid "What type of partitioning?"
msgstr "איזה סוג חלוקה למחיצות?"

#: diskdrake/interactive.pm:1059
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "יש צורך להפעיל מחדש את המחשב בכדי שהשינויים יכנסו לתוקף"

#: diskdrake/interactive.pm:1068
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "טבלת המחיצות של הכונן %s עומדת להיכתב לכונן!"

#: diskdrake/interactive.pm:1081
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "אחרי יצירת מערכת קבצים במחיצה %s, כל המידע במחיצה זו יאבד"

#: diskdrake/interactive.pm:1101
#, c-format
msgid "Move files to the new partition"
msgstr "העבר קבצים למחיצה החדשה"

#: diskdrake/interactive.pm:1101
#, c-format
msgid "Hide files"
msgstr "הסתר קבצים"

#: diskdrake/interactive.pm:1102
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"הספרייה %s כבר כוללת מידע\n"
"(%s("

#: diskdrake/interactive.pm:1113
#, c-format
msgid "Moving files to the new partition"
msgstr "מעביר קבצים למחיצה החדשה"

#: diskdrake/interactive.pm:1117
#, c-format
msgid "Copying %s"
msgstr "מעתיק %s"

#: diskdrake/interactive.pm:1121
#, c-format
msgid "Removing %s"
msgstr "מסיר את %s"

#: diskdrake/interactive.pm:1135
#, c-format
msgid "partition %s is now known as %s"
msgstr "המחיצה %s זמינה כעת כ-%s"

#: diskdrake/interactive.pm:1156 diskdrake/interactive.pm:1217
#, c-format
msgid "Device: "
msgstr "התקן:"

#: diskdrake/interactive.pm:1157
#, c-format
msgid "Devfs name: "
msgstr "שם התקן Devfs: "

#: diskdrake/interactive.pm:1158
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1159
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "אות כונן חלונות: %s (לפי ניחוש)\n"

#: diskdrake/interactive.pm:1163 diskdrake/interactive.pm:1170
#: diskdrake/interactive.pm:1235
#, c-format
msgid "Type: "
msgstr "סוג: "

#: diskdrake/interactive.pm:1167 install_steps_gtk.pm:310
#, c-format
msgid "Name: "
msgstr "שם: "

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Start: sector %s\n"
msgstr "התחלה: מקטע %s\n"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Size: %s"
msgstr "גודל: %s"

#: diskdrake/interactive.pm:1177
#, c-format
msgid ", %s sectors"
msgstr ", %s מקטעים"

#: diskdrake/interactive.pm:1179
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "מסילה %d ל%d\n"

#: diskdrake/interactive.pm:1180
#, c-format
msgid "Number of logical extents: %d"
msgstr "מספר הרחבות לוגיות: %d"

#: diskdrake/interactive.pm:1181
#, c-format
msgid "Formatted\n"
msgstr "מפורמט\n"

#: diskdrake/interactive.pm:1182
#, c-format
msgid "Not formatted\n"
msgstr "לא מפורמט\n"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Mounted\n"
msgstr "מעוגן\n"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "RAID %s\n"
msgstr ""

#: diskdrake/interactive.pm:1186
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""

#: diskdrake/interactive.pm:1187
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"מחיצה מאתחלת כברירת מחדל\n"
"    (לאתחול מ-DOS, לא מ-Lilo)\n"

#: diskdrake/interactive.pm:1189
#, c-format
msgid "Level %s\n"
msgstr "שלב %s\n"

#: diskdrake/interactive.pm:1190
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "גודל חתיכה %d KiB\n"

#: diskdrake/interactive.pm:1191
#, c-format
msgid "RAID-disks %s\n"
msgstr ""

#: diskdrake/interactive.pm:1193
#, c-format
msgid "Loopback file name: %s"
msgstr ""

#: diskdrake/interactive.pm:1196
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"רוב הסיכויים הם, שמחיצה זו היא\n"
"מחיצה של מנהלי התקנים. כנראה שעליך\n"
"להשאירה כמות שהיא.\n"

#: diskdrake/interactive.pm:1199
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"מחיצת אתחול מיוחדת הזאת \n"
"היא עבור אתחול כפול של המערכת שלך.\n"

#: diskdrake/interactive.pm:1218
#, c-format
msgid "Read-only"
msgstr "קריאה-בלבד"

#: diskdrake/interactive.pm:1219
#, c-format
msgid "Size: %s\n"
msgstr "גודל: %s\n"

#: diskdrake/interactive.pm:1220
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "תכונות: %s מסילות, %s ראשים, %s מקטעים\n"

#: diskdrake/interactive.pm:1221
#, c-format
msgid "Info: "
msgstr "מידע: "

#: diskdrake/interactive.pm:1222
#, c-format
msgid "LVM-disks %s\n"
msgstr "כונני LVM %s\n"

#: diskdrake/interactive.pm:1223
#, c-format
msgid "Partition table type: %s\n"
msgstr "סוג טבלת המחיצות: %s\n"

#: diskdrake/interactive.pm:1224
#, c-format
msgid "on channel %d id %d\n"
msgstr "בערוץ %d זיהוי %d\n"

#: diskdrake/interactive.pm:1256
#, c-format
msgid "Filesystem encryption key"
msgstr "מפתח ההצפנה של המערכת"

#: diskdrake/interactive.pm:1257
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "עליך לבחור את מפתח ההצפנה של המערכת שלך"

#: diskdrake/interactive.pm:1260
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "מפתח ההצפנה פשוט מדי (חייב להיות באורך של %d תווים לפחות)"

#: diskdrake/interactive.pm:1261
#, c-format
msgid "The encryption keys do not match"
msgstr "מפתחות ההצפנה לא תואמים"

#: diskdrake/interactive.pm:1264 network/netconnect.pm:1040
#: standalone/drakconnect:395
#, c-format
msgid "Encryption key"
msgstr "מפתח הצפנה"

#: diskdrake/interactive.pm:1265
#, c-format
msgid "Encryption key (again)"
msgstr "חזרה על מפתח הצפנה"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "שינוי סוג"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "אין אפשרות כניסה עם שם משתמש %s (סיסמה שגויה?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "איזה שם משתמש"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "עוד אחד"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "שם משתמש"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "חפש שרתים"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "חפש שרתים חדשים"

#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "יש צורך להתקין את החבילה %s. האם ברצונך להתקינה?"

#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "נדרשת החבילה %s אך היא חסרה"

#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "מתקין חבילות..."

#: do_pkgs.pm:216
#, c-format
msgid "Removing packages..."
msgstr "מסיר חבילות..."

#: fs.pm:445 fs.pm:494
#, c-format
msgid "Mounting partition %s"
msgstr "מעגן מחיצה %s"

#: fs.pm:446 fs.pm:495
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "עיגון המחיצה %s לתיקייה %s נכשל"

#: fs.pm:466 fs.pm:473
#, c-format
msgid "Checking %s"
msgstr "בודק %s"

#: fs.pm:511 partition_table.pm:387
#, c-format
msgid "error unmounting %s: %s"
msgstr "שגיאה בניתוק %s: %s"

#: fs.pm:543
#, c-format
msgid "Enabling swap partition %s"
msgstr "מאפשר מחיצת זיכרון החלפה %s"

#: fs/format.pm:39 fs/format.pm:46
#, c-format
msgid "Formatting partition %s"
msgstr "מפרמט מחיצה %s"

#: fs/format.pm:43
#, c-format
msgid "Creating and formatting file %s"
msgstr "יוצר ומפרמט את הקובץ %s"

#: fs/format.pm:78
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "לא ידוע לי איך לפרמט את %s בסוג %s"

#: fs/format.pm:80
#, c-format
msgid "%s formatting of %s failed"
msgstr "פירמוט %s של %s נכשל"

#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"אל תעדכן זמני גישה ל inode במערכת קבצים זו\n"
"(יכול לשמש לכוונון שרתים)"

#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"אפשר עיגון ישיר בלבד (דהיינו mount -a\n"
"לא יגרום לעיגון אוטומטי של מערכת קבצים זו)"

#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "אל תפענח התקני character והתקני block על מערכת קבצים זו."

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"אל תאפשר הפעלת קבצים בינאריים על מערכת קבצים זו\n"
"לאחר העיגון. אפשרות זו עשויה לשמש בהגדרת שרתים\n"
"המאכסנים קבצים בינאריים למעבדים שונים מזה שלהם."

#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"אל תאפשר שינוי זיהוי משתמש או שינוי זיהוי קבוצה.\n"
"(גם אם הדבר נראה בטוח, הוא עלול לגרום לפרצת\n"
"אבטחה באם suidperl מותקן)."

#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "עגן את מערכת הקבצים לקריאה בלבד."

#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "כל גישות כתיבה/קריאה למערכת הקבצים אמורות להתבצע באופן סינכרוני."

#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"אפשר למשתמש רגיל לעגן את מערכת הקבצים. שם המשתמש שביצע\n"
"את העיגון יירשם ב mtab כך שהמשתמש יוכל גם לנתק את החיבור.\n"
"בחירה באפשרות זו תגדיר גם noexec, nosuid, nodev (אלא אם\n"
"תוגדר תצורה אחרת מאוחר יותר, למשל user,exec,dev,suid)."

#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "אפשר הרשאת כתיבה למשתמשים רגילים"

#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "אפשר הרשאת קריאה בלבד למשתמשים רגילים"

#: fs/type.pm:364
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "אין אפשרות להשתמש ב-JFS עבור מחיצה קטנה מ- 16MB"

#: fs/type.pm:365
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "אין אפשרות להשתמש ב-ReiserFS למחיצה קטנה מ-32MB"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "עם /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "שרת"

#: fsedit.pm:168
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"אין אפשרות לקרוא את טבלת המחיצות של התקן %s , כיוון שהמבנה שלו לא מוכר לי :"
"(\n"
"ניתן להמשיך עם מחיקה םל מחיצות שגויות (כל המידע יאבד!).\n"
"הפתרון האחר הוא לא לאפשר לDrakX להגדיר את טבלת המחיצות.\n"
"(השגיאה היא %s)\n"
"\n"
"האם ניתן להמשיך תוך סיכון של אובדן כל המחיצות?\n"

#: fsedit.pm:385
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "נקודות עיגון חייבות להתחיל בלוכסן (/)"

#: fsedit.pm:386
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "שמות נקודות עיגון צריכות להכיל רק אותיות, מספרים וקו תחתון"

#: fsedit.pm:387
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "כבר קיימת מחיצה עם נקודת עיגון %s\n"

#: fsedit.pm:389
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""

#: fsedit.pm:392
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "אינך יכול/ה להשתמש במחיצה לוגית של LVM לנקודת חיבור %s"

#: fsedit.pm:394
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""

#: fsedit.pm:397
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "ספרייה זו צריכה להישאר במערכת הקבצים הראשית (root)."

#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"יש להגדיר מערכת קבצים אמתית (ext2/ext3, reiserfs, xfs, או jfs) בשביל נקודת "
"העיגון הזאת\n"

#: fsedit.pm:408
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "אסור להשתמש במערכת קבצים מוצפנת לנקודת העיגון %s"

#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "אין מספיק מקום פנוי לחלוקה אוטומטית"

#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "לא נדרש לעשות דבר"

#: fsedit.pm:569
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "שגיאה בפתיחת %s לכתיבה של: %s"

#: harddrake/data.pm:61
#, c-format
msgid "Floppy"
msgstr "תקליטון"

#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "ZIP"

#: harddrake/data.pm:81
#, c-format
msgid "Disk"
msgstr "דיסק"

#: harddrake/data.pm:90
#, c-format
msgid "CDROM"
msgstr "תקליטור"

#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr "צורבי CD/DVD"

#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:120 standalone/drakbackup:2045
#, c-format
msgid "Tape"
msgstr "טייפ"

#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr "כרטיס מסך"

#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr "כרטיס טלוויזיה"

#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr "התקני מולטימדיה אחרים"

#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr "כרטיס קול"

#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr "מצלמת רשת"

#: harddrake/data.pm:181
#, c-format
msgid "Processors"
msgstr "מעבדים"

#: harddrake/data.pm:191
#, c-format
msgid "ISDN adapters"
msgstr "מתאמי ISDN"

#: harddrake/data.pm:201
#, c-format
msgid "Ethernetcard"
msgstr "כרטיס Ethernet"

#: harddrake/data.pm:219 network/netconnect.pm:484
#, c-format
msgid "Modem"
msgstr "מודם"

#: harddrake/data.pm:229
#, c-format
msgid "ADSL adapters"
msgstr "מתאמי ADSL"

#: harddrake/data.pm:243
#, c-format
msgid "AGP controllers"
msgstr "בקרי AGP"

#: harddrake/data.pm:252
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:261 help.pm:186 help.pm:855
#: install_steps_interactive.pm:992 printer/printerdrake.pm:875
#, c-format
msgid "Printer"
msgstr "מדפסת"

#: harddrake/data.pm:271
#, c-format
msgid "Joystick"
msgstr "ג'ויסטיק"

#: harddrake/data.pm:281
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "בקרי (E)IDE/ATA"

#: harddrake/data.pm:290
#, c-format
msgid "SATA controllers"
msgstr "בקרי SATA"

#: harddrake/data.pm:299
#, c-format
msgid "Firewire controllers"
msgstr "בקרי Firewire"

#: harddrake/data.pm:308
#, c-format
msgid "PCMCIA controllers"
msgstr "בקרי PCMCIA"

#: harddrake/data.pm:321
#, c-format
msgid "SCSI controllers"
msgstr "בקרי SCSI"

#: harddrake/data.pm:330
#, c-format
msgid "USB controllers"
msgstr "בקרי USB"

#: harddrake/data.pm:339
#, c-format
msgid "USB ports"
msgstr "יציאות USB"

#: harddrake/data.pm:348
#, c-format
msgid "SMBus controllers"
msgstr "בקרי SMBus"

#: harddrake/data.pm:357
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:366 help.pm:855 install_steps_interactive.pm:120
#: install_steps_interactive.pm:952 standalone/keyboarddrake:24
#, c-format
msgid "Keyboard"
msgstr "מקלדת"

#: harddrake/data.pm:379 help.pm:855 install_steps_interactive.pm:985
#, c-format
msgid "Mouse"
msgstr "עכבר"

#: harddrake/data.pm:393
#, c-format
msgid "Scanner"
msgstr "סורק"

#: harddrake/data.pm:403 standalone/harddrake2:431
#, c-format
msgid "Unknown/Others"
msgstr "לא ידוע/אחרים"

#: harddrake/data.pm:431
#, c-format
msgid "cpu # "
msgstr "מעבד # "

#: harddrake/sound.pm:170 standalone/drakconnect:169
#: standalone/drakconnect:613
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "נא להמתין... מיישם את ההגדרות"

#: harddrake/sound.pm:206
#, c-format
msgid "No alternative driver"
msgstr "אין מנהל התקן חלופי"

#: harddrake/sound.pm:207
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr "אין חלופות OSS או ALSA לכרטיס הקול שלך (%s) אשר משתמש כרגע ב\"%s\""

#: harddrake/sound.pm:213
#, c-format
msgid "Sound configuration"
msgstr "הגדרות קול"

#: harddrake/sound.pm:215
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"כאן באפשרותך לבחור מנהל התקן תחליפי (או OSS או ALSA) לכרטיס הקול שלך (%s)."

#: harddrake/sound.pm:217
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"כרטיס הקול שלך משתמש כרגע במנהל ההתקן %s\"%s\" (ברירת מחדל למנהל התקן "
"לכרטיסך \"%s\")"

#: harddrake/sound.pm:219
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:233 harddrake/sound.pm:318 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "מנהל התקן:"

#: harddrake/sound.pm:238
#, c-format
msgid "Trouble shooting"
msgstr "פתרון בעיות"

#: harddrake/sound.pm:246
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:254
#, c-format
msgid "No open source driver"
msgstr "אין מנהל התקן בקוד פתוח"

#: harddrake/sound.pm:255
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""

#: harddrake/sound.pm:258
#, c-format
msgid "No known driver"
msgstr "אין מנהל התקן ידוע"

#: harddrake/sound.pm:259
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "אין פה מנהל התקן ידוע לכרטיס הקול שלך (%s)"

#: harddrake/sound.pm:263
#, c-format
msgid "Unknown driver"
msgstr "מנהל התקן לא ידוע"

#: harddrake/sound.pm:264
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "שגיאה: ההתקן \"%s\" עבור הכרטיס קול שלך לא רשום"

#: harddrake/sound.pm:278
#, c-format
msgid "Sound trouble shooting"
msgstr "פתרון בעיות קול"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:281
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:307
#, c-format
msgid "Let me pick any driver"
msgstr "תן לי לבחור מנהל התקן כלשהו"

#: harddrake/sound.pm:310
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:313
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "זיהוי-אוטומטי"

#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "לא ידוע|כללי"

#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "לא ידוע (CPH06X (bt878 [הרבה ספקים]"

#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"עבור רוב כרטיסי הטלוויזיה המודרניים, המודול BTTV מזהה את הפרמטרים הנכונים "
"באופן אוטומטי. \n"
"אם הכרטיס שלך לא מזוהה נכון, יש באפשרותך להגדיר את הכוונן (tuner) וסוג "
"הכרטיס הנכון במידת הצורך."

#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "דגם הכרטיס:"

#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr "סוג כוונן (Tuner):"

#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr "מספר של חוצצי תפיסה:"

#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr "הגדרות PLL"

#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr "תמיכת רדיו:"

#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr "אפשר תמיכת רדיו"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"לפני המשך ההתקנה, עליך לקרוא בעיון רב את תנאי ההסכם.\n"
"ההסכם המצ\"ב נוגע להפצת מנדרייק-לינוקס כמקשה אחת.\n"
"אם כל התנאים מוסכמים עליך, עליך לסמן את התיבה \"%s\", \n"
"אחרת עליך ללחוץ על הכפתור  \"%s\" בכדי לאתחל המחשב שלך."

#: help.pm:14 install_steps_gtk.pm:567 install_steps_interactive.pm:94
#: install_steps_interactive.pm:745 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "הסכמה"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point won't be authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system won't work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you won't affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and don't care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1488 printer/printerdrake.pm:1608
#, c-format
msgid "User name"
msgstr "שם משתמש"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:247
#: interactive.pm:403 interactive/newt.pm:317 network/netconnect.pm:280
#: network/tools.pm:198 printer/printerdrake.pm:3268
#: standalone/drakTermServ:372 standalone/drakbackup:3941
#: standalone/drakbackup:4035 standalone/drakbackup:4052
#: standalone/drakbackup:4070 ugtk2.pm:515
#, c-format
msgid "Next"
msgstr "הבא"

#: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr "מתקדם"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"התקנת מנדרייק-לינוקס פרוסה על מספר תקליטורים. אם חבילה מסויימת\n"
"שנבחרה ממוקמת בתקליטור אחר, מגש כונן התקליטורים יפתח לצורך\n"
"הכנסת תקליטור אחר לפי הצורך. אם התקליטור המבוקש אינו ברשותך,\n"
"עליך ללחוץ על \"%s\" להמשך ללא התקנת החבילה שאינה זמינה."

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"כעת עליך לבחור איזה חבילות ברצונך להתקין במערכת שלך.\n"
"קיימות אלפי חבילות זמינות עבור מנדרייק-לינוקס, ועל מנת\n"
"לפשט עבורך את בחירת החבילות הגדרנו קבוצות המכילות\n"
"תוכנות לפי נושא.\n"
"\n"
"החבילות השונות שוייכו לקבוצות המייצגות שימושים אפשריים של\n"
"המערכת שלך. הקבוצות השונות מויינו לארבעה נושאים. באפשרותך\n"
"לבחור יישומים מנושאים שונים, למשל התקנת \"תחנת עבודה\"\n"
"יכולה לכלול יישומים מקבוצת \"שרת\". \n"
"\n"
" * \"%s\": עליך לבחור קבוצה אחת או יותר\n"
"מנושא זה באם השימוש המיועד של המחשב הוא כתחנת עבודה.\n"
"\n"
" * \"%s\": אם בכוונתך להשתמש במערכת\n"
"לפיתוח תוכנה, עליך לבחור את הקבוצות הנדרשות מנושא זה.\n"
"קבוצת \"LSB\" תגדיר את המערכת שלך באופן שתתאים למפרט\n"
"Linux Standard Base.\n"
"\n"
"   בחירת בקבוצת \"LSB\" תתקין גם קרנל מסדרת \"2.4\" , במקום\n"
"ברירת המחדל מסדרה \"2.6\". דבר זה נועד להבטיח תאימות\n"
"של 100%% לתקן LSB. גם ללא בחירה בקבוצת LSB, המערכת\n"
"תהיה תואמת למפרט LSB כמעט ב 100%%.\n"
"\n"
" * \"%s\": באם השימוש המיועד של מערכת\n"
"זו הוא כשרת, עליך לבחור את השרותים שברצונך להתקין.\n"
"\n"
" * \"%s\": נושא זה מרכז את סביבות העבודה\n"
"הגרפיות. עליך לבחור לפחות סביבת עבודה גרפית אחת באם\n"
"ברצונך להשתמש בממשק גרפי במחשב זה.\n"
"\n"
"העברת סמן העכבר מעל שם קבוצה תגרום להצגת הסבר קצר\n"
"על הקבוצה.\n"
"\n"
"סימון התיבה \"%s\" שימושי באם ברצונך שליטה מלאה\n"
"על התקנת החבילות או שיש לך היכרות מוקדמת עם החבילות\n"
"המוצעות.\n"
"\n"
"התחלת ההתקנה באופן \"%s\" תאפשר לך לבטל את\n"
"הסימון מעל הקבוצות ולמנוע התקנה של חבילות חדשות. אופן\n"
"זה שימושי לשדרוג או לעדכון מערכת קיימת.\n"
"\n"
"יש באפשרותך לבצע התקנה מינימלית ע\"י הסרת הסימון מכל\n"
"הקבוצות במהלך התקנה רגילה (להבדיל משדרוג). במקרה זה\n"
"יוצג חלון שיאפשר לך לבחור אפשרויות שונות עבור התקנה שכזו:\n"
"\n"
" * \"%s\": התקנת החבילות ההכרחיות בלבד\n"
"להפעלת שולחן עבודה גרפי.\n"
"\n"
" * \"%s\": התקנת בסיס המערכת בתוספת\n"
"מספר תוכנות עזר והתיעוד שלהן. תצורה זו שימושית להגדרת שרת.\n"
"\n"
" * \"%s\": אפשרות זו תתקין את מספר\n"
"החבילות הקטן ביותר הנדרש למערכת לינוקס עובדת. תצורה זו\n"
"מאפשרת עבודה רק דרך שורת הפקודה וגודלה הוא כ 65 MB.\n"
"בלבד."

#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "תחנת עבודה"

#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "פיתוח"

#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "סביבה גרפית"

#: help.pm:146 install_steps_gtk.pm:242 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr "בחירת חבילות באופן פרטני"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "עדכון"

#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "עם סביבה גרפית (X)"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "עם מסמכים בסיסיים"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "התקנה מינימלית באמת"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you don't know what a particular service is supposed to do or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"מסך זה מוצג היות וביקשת לבחור את החבילות שיותקנו באופן פרטני.\n"
"עבור כל נושא מוצגות החבילות שבאפשרותך להתקין, במבנה \"עץ\"\n"
"ובמיון לקבוצות ותתי-קבוצות. יש באפשרותך לבחור קבוצות, תתי-קבוצות,\n"
"או לבחור בחבילות בודדות.\n"
"\n"
"כל פעם שתיבחר חבילה מהעץ, יופיע תיאור של תוכן החבילה מצד\n"
"שמאל (באנגלית) שתספק לך מידע אודות החבילה.\n"
"\n"
"!! אם נבחרה חבילת שרת, בין אם ישירות או מכיוון שנבחרה קבוצה\n"
"המכילה חבילה זו, יהיה עליך לאשר שאכן ברצונך להתקין חבילה זו\n"
"(מסך האישור יוצג בהמשך). כברירת מחדל, מנדרייק-לינוקס\n"
"תפעיל כל שרות מותקן במהלך אתחול המחשב. גם אם שרתים אלו\n"
"בטוחים ולא ידוע על בעיות אבטחה בזמן שחרור ההפצה, בהחלט\n"
"ייתכן שבעיות אבטחה התגלו או יתגלו במועד מאוחר יותר. אם לא\n"
"ידוע לך מה שרות מסויים אמור לעשות או למה הוא יותקן, עליך\n"
"ללחוץ על \"%s\". בחירה ב \"%s\" תגרום\n"
"להתקנת השרותים הרשומים ולהפעלתם באופן אוטומטי בזמן אתחול\n"
"המחשב. !!\n"
"\n"
"האפשרות \"%s\" מיועדת לנטרל\n"
"את הודעת האזהרה המופיעה כאשר תוכנת ההתקנה בוחרת בחבילות\n"
"הנדרשות לצורך התקנה של חבילות נבחרות עקב תלויות. תלויות בין\n"
"חבילות פרושן שהתקנת חבילה מסויימת מחייבת התקנת חבילות\n"
"נוספות. תוכנת ההתקנה יכולה לזהות בעצמה את החבילות שיש\n"
"להתקין על מנת לספק את התלויות הנדרשות.\n"
"\n"
"סמל התקליטון הקטן בתחתית הרשימה מאפשר לך לטעון רשימת\n"
"חבילות שנוצרה במהלך התקנה קודמת. דבר זה שימושי באם יש\n"
"ברשותך מספר מחשבים שברצונך להתקין עם מבחר חבילות דומה.\n"
"בחירה בסמל זה תבקש ממך להכניס תקליטון שנוצר בסיום התקנה\n"
"קודמת. הטיפ השני בשלב הקודם מסביר כיצד ניתן ליצור תקליטור\n"
"כזה."

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:722
#: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:299 ugtk2.pm:1121
#: wizards.pm:156
#, c-format
msgid "No"
msgstr "לא"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:722 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:711
#: standalone/drakbackup:2503 standalone/drakgw:290 standalone/drakgw:291
#: standalone/drakgw:299 standalone/drakgw:309 standalone/draksec:55
#: standalone/harddrake2:298 ugtk2.pm:1121 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "כן"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "תלויות אוטומטיות"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:622
#: standalone/drakbackup:2329 standalone/drakbackup:2333
#: standalone/drakbackup:2337 standalone/drakbackup:2341
#, c-format
msgid "Configure"
msgstr "הגדרות"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which aren't needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably don't want to start any services which you don't need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:887
#, c-format
msgid "Hardware clock set to GMT"
msgstr "שעון מערכת מכוון ל-GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "סינכרון זמן אוטומטי"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"אפשרויות\n"
"\n"
"   השלבים הבאים מאפשרים לך לבחור האם ברצונך שהסביבה\n"
"הגרפית תופעל בטעינת המערכת. תשובת \"%s\" מתאימה\n"
"למחשב שאמור לתפקד כשרת, או באם לא הצלחת להגדיר את\n"
"התצוגה כראוי בשלב ההתקנה."

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you won't be able to undo this operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"בשלב זה, עליך לבחור היכן תותקן מערכת מנדרייק-לינוקס בכונן\n"
"הקשיח שלך. אם הכונן הקשיח שלך ריק או אם מערכת הפעלה אחרת\n"
"עושה שימוש בכל השטח שעל הכונן, יהיה צורך לבצע חלוקת מחיצות.\n"
"במילים פשוטות, חלוקת מחיצות משמעה חלוקה לוגית של שטח הכונן\n"
"לאזורים שונים על מנת ליצור את השטח הנדרש להתקנת מערכת\n"
"מנדרייק-לינוקס החדשה שלך.\n"
"\n"
"מאחר ותהליך חלוקת המחיצות הינו בלתי-הפיך ועלול לגרום לאובדן\n"
"מידע באם כבר מותקנת לך מערכת הפעלה אחרת על הכונן, חלוקת\n"
"מחיצות הינה תהליך מפחיד ומלחיץ עבור משתמשים חסרי ניסיון.\n"
"למזלך, תהליך ההתקנה מכיל אשף אשר מפשט את הפעולה. לפני\n"
"המשך ההתקנה, עליך לקרוא ביסודיות ולהבין את ההוראות שלהלן.\n"
"\n"
"כתלות בתצורת הכונן הקשיח שלך, מוצגות בפניך מספר אפשרויות\n"
"כלהלן:\n"
" * \"%s\": אפשרות זו תבצע\n"
"חלוקת מחיצות אוטומטית של שטח(ים) פנוי(ים). בחירה באפשרות\n"
"זו לא תדרוש ממך שום צעד נוסף.\n"
"\n"
" * \"%s\": האשף זיהה מחיצת לינוקס\n"
"אחת או יותר על הכונן הקשיח. בחירת אפשרות זו תאפשר לך להגדיר\n"
"את נקודת העיגון של כל אחת מהמחיצות. נקודות העיגון הקיימות\n"
"יוצגו כברירת מחדל, וברוב המקרים מומלץ שלא לשנות הגדרות אלו.\n"
"\n"
" * \"%s\": באם מותקנת\n"
"על הכונן הקשיח שלך מערכת חלונות של מיקרוסופט העושה שימוש\n"
"בכל השטח שעל הכונן, יהיה עליך לפנות מקום להתקנת גנו/לינוקס.\n"
"יש באפשרותך למחוק את מחיצת החלונות לחלוטין כולל כל המידע\n"
"שעליה (ע\"י בחירה ב\"מחיקת כל המידע הקיים שעל מחיצת חלונות\")\n"
"או להקטין את גודל מחיצת החלונות העושה שימוש במערכת קבצים\n"
"FAT או NTFS. שינוי גודל יכול להתבצע ללא אובדן\n"
"מידע, בתנאי שביצעת איחוי (defragmentation) של מחיצת החלונות\n"
"בטרם תחילת ההתקנה. מומלץ ביותר לגבות את המידע לפני ביצוע\n"
"פעולה זו. מומלץ לבחור באפשרות זו באם הנך רוצה להשתמש גם\n"
"במנדרייק-לינוקס וגם בחלונות של מיקרוסופט במחשב זה.\n"
"\n"
"   לפני בחירה באפשרות זו, עליך להבין שבסיום הפעולה גודל מחיצת\n"
"החלונות שלך יהיה קטן מהגודל המקורי שלה. לפיכך יישאר לך פחות\n"
"מקום לשמירת מידע ולהתקנת תוכנות של חלונות.\n"
"\n"
" * \"%s\": עליך לבחור באפשרות\n"
"זו רק אם ברצונך למחוק את כל המידע הקיים בכונן הקשיח שלך\n"
"ולהתקין את מערכת מנדרייק-לינוקס בכל השטח שהתפנה. יש\n"
"לנקוט משנה זהירות טרם בחירת אפשרות זו, מאחר ואין דרך לשחזר\n"
"את המצב הקיים אחרי השלמת הפעולה.\n"
"\n"
"   !! בחירה באפשרות הנ\"ל תגרום למחיקת כל המידע שעל הכונן\n"
"הקשיח !!\n"
"\n"
" * \"%s\": אפשרות זו מופיעה\n"
"כאשר כל הכונן תפוס על ידי מערכת חלונות של מיקרוסופט. בחירה\n"
"באפשרות זו תגרום לפירמוט ומחיקת כל המידע שעל הכונן הקשיח.\n"
"\n"
"   !! בחירה באפשרות הנ\"ל תגרום למחיקת כל המידע שעל הכונן\n"
"הקשיח !!\n"
"\n"
" * \"%s\": יש לבחור באפשרות\n"
"זו באם ברצונך לבצע חלוקת מחיצות בהתאמה אישית. זהירות - אפשרות\n"
"זו מסוכנת ושימוש לא מושכל בה עלול לגרום לאובדן כל המידע שקיים\n"
"בכונן הקשיח שלך. לפיכך, אפשרות זו מומלצת רק אם יש לך נסיון קודם\n"
"בחלוקת מחיצות, ולאחר עיון בתיעוד המתאים המופיע במדריך המצורף\n"
"לחבילות מנדרייק-לינוקס הנרכשות בחנות."

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "שימוש בשטח החופשי (לא מפורמט)"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "שימוש במחיצות קיימות"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "שימוש בשטח החופשי שעל מחיצת חלונות"

#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "מחיקת כל המידע הקיים בכונן הקשיח"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "הסרת מערכת חלונות"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "התאמה אישית של החלוקה למחיצות"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Don't forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"ההתקנה הסתיימה כעת, ומערכת הגנו/לינוקס שלך מוכנה לשימוש.\n"
"עליך ללחוץ \"%s\" בכדי לאתחל את המחשב. נא לא לשכוח להוציא\n"
"את תקליטור או תקליטון ההתקנה. הדבר הראשון שיופיע על המסך\n"
"לאחר סיום בדיקות החומרה, הוא מנהל האתחול, שמאפשר לבחור\n"
"איזו מערכת הפעלה לאתחל.\n"
"\n"
" הכפתור \"%s\" משמש להצגת שתי אפשרויות נוספות:\n"
" \n"
"* \"%s\": יצירת תקליטון תצורה אשר יאפשר התקנה\n"
"חוזרת ללא עזרת מפעיל, תוך שימוש בהגדרות זהות להתקנה\n"
"הנוכחית. \n"
"\n"
"   לתשומת לבך, אחרי לחיצה על כפתור זה יופיעו שתי אפשרויות\n"
"נוספות:\n"
"\n"
"    *\"%s\". שחזור התקנה יתבצע באופן אוטומטי\n"
"למחצה, כאשר חלוקת מחיצות תתבצע באופן אינטראקטיבי.\n"
" \n"
"    *\"%s\". שחזור התקנה יתבצע באופן אוטומטי\n"
"לחלוטין: תכולת הכונן הקשיח תמחק, וכל המידע השמור בו יאבד.\n"
"\n"
"  אפשרות זאת שימושית מאוד, כאשר עליך לבצע התקנה על מספר\n"
"רב של מחשבים דומים. ניתן לקבל מידע נוסף באיזור ההתקנה\n"
"האוטומטית באתר שלנו.\n"
"\n"
" * \"%s\"(*): שמירת רשימת החבילות בהתקנה זאת.\n"
"בכדי להשתמש ברשימה זאת עבור התקנה חדשה, עליך להתחיל\n"
"התקנות חדשות מתקליטון זה. במסך הפתיחה, עליך ללחוץ על\n"
"מקש F1 ואז לכתוב linux defcfg=\"floppy\" וללחוץ על Enter.\n"
"\n"
"(*) שמירת התצורה דורשת תקליטון מפורמט עם מערכת קבצים\n"
"FAT. ליצירת תקליטון כזה במערכת לינוקס יש להשתמש בפקודת\n"
"\"mformat a:\", או \"fdformat /dev/fd0\" ואז  \"mkfs.vfat/dev/fd0\"."

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "יצירת תקליטון התקנה אוטומטית"

#: help.pm:409 install_steps_interactive.pm:1363
#, c-format
msgid "Replay"
msgstr "שחזור התקנה"

#: help.pm:409 install_steps_interactive.pm:1363
#, c-format
msgid "Automated"
msgstr "אוטומטי"

#: help.pm:409 install_steps_interactive.pm:1366
#, c-format
msgid "Save packages selection"
msgstr "שמירת בחירת החבילות"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you don't have to reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"won't be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:431 install_steps_gtk.pm:402 interactive.pm:404
#: interactive/newt.pm:316 printer/printerdrake.pm:3266
#: standalone/drakTermServ:351 standalone/drakbackup:3901
#: standalone/drakbackup:3940 standalone/drakbackup:4051
#: standalone/drakbackup:4066 ugtk2.pm:513
#, c-format
msgid "Previous"
msgstr "קודם"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:401
#: install_steps_interactive.pm:158 standalone/drakbackup:4098
#, c-format
msgid "Install"
msgstr "התקנה"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you don't know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"בשלב זה, עליך לבחור את סף האבטחה הרצוי עבור מחשב זה.\n"
"ככלל אצבע, סף האבטחה אמור להיות גבוה יותר באם המערכת\n"
"כוללת מידע רגיש, או אם המחשב יהיה מקושר לאינטרנט.\n"
"ה\"מחיר\" של סף אבטחה גבוה יותר יבוא ברוב המקרים על\n"
"חשבון קלות השימוש.\n"
"\n"
"באם קשה לך לבחור, מומלץ לאשר את ברירת המחדל. בכל\n"
"מקרה יש באפשרותך לשנות את סף האבטחה בשלב מאוחר יותר\n"
"דרך האשף המתאים במרכז הבקרה.\n"
"\n"
"השדה \"%s\" משמש להגדרת מנהל האבטחה האחראי למחשב\n"
"זה. הודעות הנוגעות לאבטחת המערכת יישלחו לכתובת המצויינת\n"
"בסעיף זה."

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "מנהל אבטחה"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "עיגון אוטומטי של התקן-נשלף"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "מעבר בין מצבי רגיל\"מומחה "

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country isn't in the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": עליך לבדוק את בחירת המדינה. אם.\n"
"מיקומך אינו במדינה זאת, עליך ללחוץ על הכפתור %s\n"
"ואז לבחור מדינה אחרת. אם המדינה שלך לא מופיעה ברשימה זו,\n"
"עליך ללחוץ על הכפתור \"%s\"  לרשימה מורחבת."

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data won't be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
"שלב זה מופעל רק כאשר זוהתה מחיצת גנו/לינוקס קיימת במחשבך.\n"
"\n"
"האשף צריך לדעת אם ברצונך לבצע התקנה חדשה או לשדרג את מערכת\n"
"מנדרייק-לינוקס הנוכחית המותקנת במחשב זה.\n"
"\n"
" * \"%s\": אופן התקנה זה ימחק ברוב המקרים את המערכת הנוכחית.\n"
"עם זאת, ובכפוף לחלוקת המחיצות הקיימת שלך, יש באפשרותך למנוע\n"
"מחלק מהמידע הקיים שלך (בעיקר מחיצת home/) מלהיות משוכתב.\n"
"אפשרות זו שימושית אם ברצונך לשנות את אופן חלוקת הכונן הקשיח\n"
"לשנות את מערכת הקבצים.\n"
"\n"
" * \"%s\": אופן התקנה זה יאפשר לך לעדכן את החבילות המותקנות\n"
"במערכת מנדרייק-לינוקס שלך. אופן חלוקת המחיצות ומידע המשתמש\n"
"שלך לא ישוכתבו. רוב שלבי ההתקנה האחרים עדיין זמינים, באופן דומה\n"
"להתקנה רגילה.\n"
"\n"
"הערה:\n"
"בחירת אפשרות ה\"שדרוג\" אמורה לפעול על מערכות מנדרייק-לינוקס\n"
"מגרסה 8.1 ואילך. שדרוג גרסאות הקודמות לגרסת מנדרייק-לינוקס 8.1\n"
"אינה מומלצת."

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard don't match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"אשף ההתקנה בחר עבורך את פריסות המקלדת המתאימות לשפות שבחרת\n"
"בשלב קודם. עליך לבחור את פריסת המקלדת מבין האפשרויות המופיעות\n"
"להלן או לאשר את ברירת המחדל.\n"
"\n"
"במקרים מסויימים, יתכן כי המקלדת שברשותך אינה תואמת בדיוק לשפה בה\n"
"בחרת. לדוגמה, אם שפת האם שלך היא אנגלית אך מקום מגוריך הוא בשוויץ,\n"
"ייתכן ויש ברשותך מקלדת שוויצרית. לחילופין, אם מקום מגורייך הוא בקוויבק\n"
"(קנדה) אך בחרת בשפה האנגלית, ייתכן והשפה בה בחרת ופריסת המקלדת\n"
"שברשותך אינם תואמים. בשני המצבים, השלב הנוכחי בהתקנה יאפשר לך\n"
"לבחור את פריסת המקלדת הרצוייה מתוך רשימה.\n"
"\n"
"באם המקלדת שברשותך לא מופיעה ברשימה, עליך ללחוץ על הכפתור \"%s\"\n"
"על מנת להציג רשימה מלאה של המקלדות הנתמכות.\n"
"\n"
"אם פריסת המקלדת הרצוייה אינה מבוססת לאטינית, החלון הבא יאפשר לך\n"
"לבחור את צרוף המקשים שיאפשר לך להחליף בין פריסות שונות."

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "ספרדית"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "עם הדמיית גלגלת"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"נא לבחור את היציאה הנכונה. לדוגמה, יציאה \"COM1\" תחת Windows תקרא, \"ttyS0"
"\"\n"
"תחת GNU/Linux."

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: don't make the password too long or too complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password won't be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you don't know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "אימות"

#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:722 install_steps_interactive.pm:1211
#, c-format
msgid "No password"
msgstr "בלי סיסמה"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can't determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" won't install any boot loader. Use this option only if you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrakelinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you don't have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrakelinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"כעת עליך לבחור מנגנון הדפסה במערכת. מערכות הפעלה אחרות אפשרו לך\n"
"להשתמש במערכת הדפסה אחת, אולם מנדרייק-לינוקס נותנת לך שתיים\n"
"כל אחת ממערכות ההדפסה מותאמות לשימושים מסוימים ולתצורות שונות. \n"
"\n"
" * \"%s\" שהיא ראשי תיבות של \"הדפס, אל תוסיף לתור\" היא\n"
"הבחירה המומלצת אם יש לך גישה ישירה למדפסת, ברצונך לתקן בעיות של\n"
"דפים שנתקעים במדפסת, ואין לך מדפסות רשת. (\"%s\" יכולה\n"
"לשמש בתצורות רשת פשוטות, אך היא עלולה להיות איטית במקצת).\n"
"מומלץ להשתמש במערכת זו באם אין לך היכרות קודמת עם גנו/לינוקס.\n"
"\n"
"* \"%s\" - שהיא ראשי תיבות של \"מערכת הדפסה\n"
"סטנדרטית ביוניקס\" מצוינת להדפסה למדפסת מקומית או למדפסת\n"
"שנמצאת בחצי השני של העולם. היא פשוטה להגדרה ויכולה לשמש\n"
"בתור לקוח אל מערכת ההדפסה הישנה \"lpd\" , כך שהיא מבטיחה\n"
"תאימות עם מערכות הפעלה ישנות יותר.אשר אולי יצטרכו שירותי הדפסה.\n"
"למרות עוצמתה הרבה, התצורה הבסיסית פשוטה כמעט כמו \"pdq\".\n"
" אם נדרשת לך הדמיית שירותי \"lpd\" עליך לאפשר את שרות הרקע\n"
"\"cups-lpd\"  המערכת \"%s\" כוללת גם כלי גרפי \n"
"להדפסה או לבחירה של אפשרויות הדפסה, וכמו כן לניהול המדפסת.\n"
"\n"
"אם לאחר ההתקנה יתברר כי מערכת ההדפסה אינה מתאימה לצרכים\n"
"שלך, יש באפשרותך לשנות אותה על ידי הרצת אשף המדפסת\n"
"ממרכז הבקרה של מנדרייק-לינווקס ובחירה בכפתור \"%s\"."

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:115 printer/data.pm:104
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "מצב מומחה"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"בתחילה יבוצע זיהוי התקני IDE שבמחשבך על ידי DrakX שגם יסרוק אחר אחד או\n"
" יותר כרטיסי PCI SCSI במערכת שלך. אם כרטיס SCSI נמצא, DrakX יתקין מנהל התקן\n"
" מתאים באופן אוטומטי.\n"
" \n"
" \n"
"מפני שזיהוי החומרה האוטומטי אינו מובטח, DrakX עלול להיכשל בזיהוי הכוננים "
"הקשיחים\n"
" המותקנים במחשבך. במקרה שכזה יהיה עליך להגדיר את החומרה שברשותך באופן ידני.\n"
" \n"
" \n"
" אם היה עליך להגדיר מתאם PC SCSI באופן ידני, DraxX ישאל אם ברצונך לעדכן את\n"
" ההגדרות עבורו. עליך לאפשר ל DrakX לסרוק את החומרה אחר הגדרות ייחודיות "
"לכרטיס\n"
" אשר דרושות לאתחול המתאם. ברוב המקרים DrakX יצליח להשלים שלב זה ללא בעיות\n"
" מיוחדות.\n"
" \n"
" \n"
" אם DrakX נכשל באיתור האוטומטי של הפרמטרים הנדרשים עבור החומרה, יהיה עליך\n"
" להגדיר את מנהל ההתקנים בעצמך."

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": אם זוהה כרטיס קול במערכת שלך, הוא מוצג להלן.\n"
"אם שמת לב שהכרטיס הקול שמוצג אינו מתאים לחומרה שלך, באפשרותך,\n"
"ללחוץ על הכפתור ולבחור מנהל-התקן אחר."

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1019
#: install_steps_interactive.pm:1036
#, c-format
msgid "Sound card"
msgstr "כרטיס קול"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"isn't in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it isn't\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that doesn't suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrakelinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrakelinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:978 standalone/drakclock:101
#, c-format
msgid "Timezone"
msgstr "אזור זמן"

#: help.pm:855 install_steps_interactive.pm:1052
#, c-format
msgid "TV card"
msgstr "כרטיס טלוויזיה"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "מודם ISDN "

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "ממשק גרפי"

#: help.pm:855 install_steps_interactive.pm:1070 standalone/drakbackup:2030
#, c-format
msgid "Network"
msgstr "רשת"

#: help.pm:855 install_steps_interactive.pm:1085
#, c-format
msgid "Proxies"
msgstr "שרתים מתווכים"

#: help.pm:855 install_steps_interactive.pm:1096
#, c-format
msgid "Security Level"
msgstr "סף האבטחה המבוקש:"

#: help.pm:855 install_steps_interactive.pm:1110
#, c-format
msgid "Firewall"
msgstr "חומת אש"

#: help.pm:855 install_steps_interactive.pm:1124
#, c-format
msgid "Bootloader"
msgstr "מנהל אתחול"

#: help.pm:855 install_steps_interactive.pm:1137 services.pm:195
#, c-format
msgid "Services"
msgstr "שרותים"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"עליך לבחור את הכונן הקשיח שברצונך למחוק על מנת לפנות מקום\n"
"למחיצה החדשה עבור מנדרייק-לינוקס. זהירות !!! כל המידע\n"
"שנמצא על המחיצה יימחק ולא תהיה אפשרות לשחזר אותו!"

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"עליך ללחוץ על %s אם ברצונך למחוק את כל המחיצות והמידע על כונן קשיח\n"
"זה. זהירות: אחרי לחיצה על \"%s\" אין דרך לשחזר את המחיצות והמידע\n"
"המופיעים בכונן קשיח זה, כולל כל מידע של מערכת חלונות.\n"
"נא ללחוץ על \"%s\" לעצירת תהליך זה ללא איבוד המידע והמחיצות הקיימים."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "הבא ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- קודם"

#: install2.pm:117
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr "חובה עליך לפרמט גם את %s"

#: install_any.pm:390
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_any.pm:411
#, c-format
msgid "Do you have further supplementary media?"
msgstr "האם יש לך תקליטורי התקנה נוספים?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:414
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"ההתקנה תתבצע מהמקורות הבאים: %s.\n"
"\n"
"\n"
"האם ברשותך מקורות התקנה נוספים?"

#: install_any.pm:420 printer/printerdrake.pm:2652
#: printer/printerdrake.pm:2659 standalone/scannerdrake:176
#: standalone/scannerdrake:184 standalone/scannerdrake:235
#: standalone/scannerdrake:242
#, c-format
msgid "CD-ROM"
msgstr "תקליטור"

#: install_any.pm:420
#, c-format
msgid "Network (http)"
msgstr "רשת (http)"

#: install_any.pm:420
#, c-format
msgid "Network (ftp)"
msgstr "רשת (ftp)"

#: install_any.pm:464 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "לא נמצאו התקנים"

#: install_any.pm:468
#, c-format
msgid "Insert the CD"
msgstr "עליך להכניס את התקליטור"

#: install_any.pm:492
#, c-format
msgid "Insert the CD 1 again"
msgstr "עליך להכניס שוב את התקליטור הראשון"

#: install_any.pm:502 install_any.pm:506
#, c-format
msgid "URL of the mirror?"
msgstr "כתובת URL של אתר המראה?"

#: install_any.pm:532
#, c-format
msgid "Can't find hdlist file on this mirror"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:713
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"בחירת החבילות כוללת את השרת(ים) הבא(ים): %s\n"
"\n"
"\n"
"שרתים אלו יופעלו כברירת מחדל. יתכן שאין כרגע בעיות אבטחה ידועות,\n"
" אך בעיות חדשות עלולות להתגלות מדי פעם. אנו ממליצים על שדרוג תקופתי\n"
"של תוכנות אלו כדי להגן על המערכת.\n"
"\n"
"\n"
"האם ברצונך להתקין שרתים אלו בשלב זה?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:736
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"החבילות הבאות יוסרו כדי לאפשר את עדכון המערכת: %s\n"
"\n"
"\n"
"האם באמת ברצונך להסיר חבילות אלה?\n"

#: install_any.pm:1116
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "יש להכניס תקליטון מפורמט כ FAT לכונן %s"

#: install_any.pm:1120
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "תקליטון זה אינו מפורמט במערכת קבצים FAT"

#: install_any.pm:1132
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"כדי להשתמש בבחירת החבילות השמורה, יש להפעיל את ההתקנה  עם ``linux "
"defcfg=floppy'' "

#: install_any.pm:1160 partition_table.pm:595
#, c-format
msgid "Error reading file %s"
msgstr "שגיאה בקריאת הקובץ %s"

#: install_any.pm:1361
#, fuzzy, c-format
msgid "%s (was %s)"
msgstr "%s (יציאה %s)"

#: install_any.pm:1396
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"קרתה שגיאה - לא נמצאה חומרה ליצירת מערכת קבצים חדשה. נא לבדוק את החומרה "
"שגרמה לבעיה"

#: install_gtk.pm:160
#, c-format
msgid "System installation"
msgstr "התקנת המערכת"

#: install_gtk.pm:163
#, c-format
msgid "System configuration"
msgstr "הגדרת המערכת"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"חלק מהחומרה במחשב שלך צריכה מנהלי התקן \"לא חופשיים\" כדי לפעול.\n"
"אפשר למצוא מידע עליהם ב: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"חובה ליצור מחיצת שורש\n"
"בשביל כך יש ליצור מחיצה או ללחוץ על מחיצה קיימת.\n"
"ואז יש להגדיר את  \"נקודת העיגון \"  כ \"/\""

#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"אין לך מחיצת זכרון החלפה\n"
"\n"
"האם ברצונך להמשיך בכל זאת ?"

#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr ""

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "אין מספיק מקום פנוי למקם את המחיצות החדשות"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "שימוש במחיצה קיימת"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "אין מחיצה קיימת לשימוש"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "שימוש במחיצת חלונות ל-loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "באיזו מחיצה ברצונך להשתמש בשביל Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "יש לבחור את הגדלים"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "גודל מחיצת שורש ב-MB: "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "גודל מחיצת זיכרון החלפה ב-MB: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "אין מחיצת FAT לשימוש כ-loopback או אין מספיק מקום נותר"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "לאיזו מחיצה ברצונך לשנות גודל?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"תוכנת שינוי גודל מחיצת FAT אינה מסוגל להתמודד עם המחיצה שלך,\n"
"השגיאה הבאה התרחשה: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "חישוב השטח החופשי על מחיצת חלונות"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""
"מחיצת חלונות אינה מאוחה. נא להפעיל מחדש את המחשב ולהיכנס לחלונות, ושם להפעיל "
"את תוכנת איחוי המחיצות (defragment). לאחר מכן יש להפעיל מחדש את התקנת "
"מנדרייק-לינוקס"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"אזהרה!\n"
"\n"
"התכנית DrakX תשנה עכשיו את גודל מחיצת חלונות. נא לשים לב\n"
"שפעולה זאת מסוכנת. אם לא עשית כן, עליך לצאת מההתקנה, להריץ scandisk\n"
"תחת חלונות (וכנראה גם defrag) ואז לאתחל את ההתקנה.\n"
"עליך לדאוג גם לגיבויים של המידע שלך.\n"
"אם ניתן להמשיך כעת, נא ללחוץ על \"אישור\"."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "איזה גודל שטח ברצונך להשאיר לחלונות ב-"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "מחיצת %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "שינוי גודל של מחיצת חלונות"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "שינוי גודל מחיצת FAT נכשל: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "אין מחיצת FAT שניתן לשנות את גודלה (או לא מספיק מקום פנוי)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "הסרת מערכת חלונות"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"במערכת מותקנים יותר מכונן קשיח אחד, באיזה מהם ברצונך להתקין את הלינוקס?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "כל המחיצות הקיימות והמידע בהן יאבדו בכונן %s"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "השתמש ב-fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"בשלב זה יש באפשרותך להגדיר מחיצות של %s.\n"
"כאשר סיימת, לא לשכוח לשמור עם `w'"

#: install_interactive.pm:271
#, c-format
msgid "I can't find any room for installing"
msgstr "לא נמצא מקום להתקנה"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "בשלב זה עליך לבחור איך תבוצע חלוקת המחיצות לצורך ההתקנה:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "חלוקה למחיצות נכשלה: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "מאתחל את שירותי הרשת"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "מוריד את שירותי הרשת"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandrakesoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandrakesoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandrakesoft S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandrakesoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandrakesoft.\n"
"The programs developed by Mandrakesoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandrakesoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandrakesoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"Mandrakesoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandrakesoft S.A.  \n"
msgstr ""
"מבוא\n"
"\n"
"מערכת ההפעלה והמרכיבים השונים הזמינים בהפצת מנדרייק-לינוקס יקראו להלן "
"\"מוצרי תוכנה\". מוצרי התוכנה כוללים, אך\n"
"לא מוגבלים ל- אוסף התוכנות, שיטות, חוקים ומסמכים הנוגעים למערכת ההפעלה ולשאר "
"המרכיבים של מנדרייק-לינוקס.\n"
"\n"
"\n"
"1. הסכם רישוי\n"
"\n"
"עליך לקרוא רשיון זה בעיון רב. מסמך זה מהווה הסכם רישוי בינך ובין חברת "
"Mandrakesoft S.A. לגבי מוצרי התוכנה.\n"
"התקנה, שכפול או שימוש במוצרי התוכנה בכל צורה שהיא, משמעה שקיבלת והסכמת באופן "
"מפורש לתנאי וסייגי רישיון זה.\n"
"אם חלק כלשהו מרשיון זה אינו מקובל עליך, נאסר עליך להתקין, לשכפל או להשתמש "
"במוצרי התוכנה.\n"
"כל ניסיון להתקין, לשכפל או להשתמש במוצרי התוכנה בכל צורה שאינה מצייתת לתנאי "
"וסייגי הרישיון הינה חסרת תוקף ותסיים\n"
"את זכויותיך בכפוף לרישיון זה.\n"
"עם ביטול הרישוי, עליך להשמיד באופן מיידי את כל העותקים של מוצרי התוכנה.\n"
"\n"
"\n"
"2. הגבלת אחריות\n"
"\n"
"מוצרי התוכנה והתיעוד הנספח מסופקים \"כמות שהם\", בלי אחריות, עד לגבולות "
"המותרים על פי חוק.\n"
"חברת Mandrakesoft S.A. לא תהיה אחראית, בשום תנאי שהוא בכפוף להוראות החוק, "
"לכל אירוע מיוחד, נזקים ישירים\n"
"ועקיפים למיניהם (כולל, בין היתר הפסדים הנובעים עקב אובדן עסקים, הפרעה "
"להתנהלות העסק, הפסד כספי, שכר טרחת\n"
"עורך דין, קנסות ואגרות הנובעים מהחלטת בית משפט, או הפסד כתוצאה מכך) הנובעים "
"מהשימוש או מאי היכולת להשתמש\n"
"במוצרי התוכנה, וזאת גם אם הובאה לידיעתה חברת Mandrakesoft S.A האפשרות "
"לאפשרות ההתרחשות של נזקים\n"
"כאלו.\n"
"\n"
"הגבלת אחריות הנובעת משימוש או הפצת תוכנה אסורה במדינות מסויימות\n"
"\n"
"בכפוף למגבלות החוק, חברת Mandrakesoft S.A. ומפיציה, לא יהיו אחראים בשום תנאי "
"שהוא, לכל נזק מיוחד, משני,\n"
"ישיר או עקיף כלשהו  (כולל, בין היתר הפסדים הנובעים עקב אובדן עסקים, הפרעה "
"להתנהלות העסק, הפסד כספי, שכר\n"
"טרחת עורך דין, קנסות ואגרות הנובעים מהחלטת בית משפט, או הפסד כתוצאה מכך) "
"הנובעים מאחזקת ושימוש במוצרי\n"
"תוכנה, או הורדת מוצרי תוכנה מאתרי מנדרייק-לינוקס, אשר אסורים לשימוש או "
"מוגבלים במדינות מסויימות על פי\n"
"החוקים המקומיים.\n"
"הגבלת אחריות זו, כוללת, בין היתר, מרכיבי הצפנה חזקה הכלולים במוצרי התוכנה.\n"
"\n"
"\n"
"3. רשיון ה GPL ורשיונות קשורים\n"
"\n"
"מוצרי התוכנה כוללים מרכיבים שנוצרו על ידי אנשים וגופים שונים. רוב המרכיבים "
"האלו כפופים לתנאי הרישיון הציבורי\n"
"הכללי של GNU, שיכונה להלן \"GPL\", או רשיונות דומים. רוב הרשיונות האלו מרשים "
"לך להשתמש, לשכפל, לשנות או\n"
"להפיץ את המרכיבים אשר הם מכסים. עליך לקרוא בעיון את התנאים והסייגים של כל "
"מרכיב לפני השימוש במרכיב כלשהו.\n"
"עליך להפנות כל שאלה בנוגע לרשיון השימוש הנוגעת לרשיון של מרכיב כלשהו למפתח "
"התוכנה ולא ל Mandrakesoft.\n"
"  התוכנות שפותחו ע\"י חברת Mandrakesoft S.A. כפופים לרשיון ה GPL. תיעוד "
"שנכתב על ידי חברת Mandrakesoft\n"
"כפוף לרשיון מיוחד. עליך לעיין בתיעוד למידע נוסף בנידון.\n"
"\n"
"\n"
"4. זכויות קניין רוחני\n"
"\n"
"כל הזכויות למרכיבים של מוצרי התוכנה שייכים למפתחיהם בהתאמה ומוגנים על ידי "
"חוקי קניין רוחני וזכויות יוצרים התקפים\n"
"לגבי מוצרי תוכנה.\n"
"חברת Mandrakesoft S.A. שומרת לעצמה את הזכות לשנות או להתאים את מוצרי התוכנה, "
"כמקשה אחת או בחלקים,\n"
"בכל שיטה שהיא ולכל צורך שהוא.\n"
"השמות \"Mandrake\", \"מנדרייק-לינוקס\" וסמלים מסחריים הקשורים אליהם הם שמות "
"שמורים של חברת\n"
"Mandrakesoft S.A.\n"
"\n"
"\n"
"5. תקפות לחוק\n"
"\n"
"במידה ויוחלט על ידי בית משפט שחלק כלשהו של רשיון זה אינו תקף, אינו חוקי, או "
"אינו ישים, חלק זה לא יהיה כלול בחוזה\n"
"זה. שאר החלקים הישימים של הסכם זה עדיין מחייבים אותך.\n"
"התנאים והסייגים של רישיון זה כפופים לחוקי צרפת. יש לשאוף להגיע להסכמה בכל "
"ויכוח לגבי תנאי רשיון זה מחוץ לכתלי\n"
"בית המשפט. כמוצא אחרון, הויכוח יובא בפני בית המשפט המתאים של פריז - צרפת.\n"
"בכל שאלה הנוגעת למסמך זה, יש לפנות לחברת Mandrakesoft S.A.\n"
"\n"
"\n"
"נספח\n"
"\n"
"תרגום זה הינו תרגום לא רשמי לעברית של רשיון השימוש בהפצת מנדרייק-לינוקס "
"(מנדרייק לינוקס). התרגום מסופק על\n"
"מנת לאפשר לך להבין את תנאי הרישוי של הפצה זו, אולם זה אינו תרגום מחייב. "
"השימוש בהפצה כפוף לרשיון השימוש המקורי,\n"
"בשפה האנגלית, המופיע בתקליטור. מתרגמי ההפצה ו/או חברת Mandrakesoft לא יהיו "
"אחראים לכל אי-הבנה ותוצאותיה\n"
"שעלולים לנבוע מהסתמכות על התרגום הזה, ו/או אי הבנה ותוצאותיה שעלולים לנבוע "
"כתוצאה מתרגום מרכיבים אחר בהפצה\n"
"לעברית. אישור הרישיון המובא בזאת מהווה גם את הסכמתך לתנאי הנ\"ל. באם תנאי זה "
"אינו מקובל עליך, יש לבחור ב\n"
"\"סירוב\" במסך אישור רשיון השימוש.\n"
"\n"
"התנאי הנ\"ל מהווה תוספת לרשיון השימוש המקורי, ואינו מופיע בגרסה האנגלית של "
"רשיון זה, והינו תקף רק לדוברי עברית\n"
"המבצעים התקנה בעברית ו/או משתמשים בתרגומים לעברית שבוצעו על ידי מתרגמי הפצת "
"מנדרייק-לינוקס לעברית.\n"
"\n"

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"אזהרה: תוכנה חופשית אינה בהכרח חסרת-פטנטים, ומרכיבי תוכנה מסויימים הכלולים "
"בהפצה\n"
"עלולים להיות מוגנים ע\"י פטנטים במדינה שלך. למשל, מפענחי MP3 עלולים לדרוש "
"רשיון\n"
"להמשך שימוש (ניתן לעיין ב http://www.mp3licensing.com לקבלת מידע נוסף). אם "
"לא\n"
"ידוע לך האם פטנט מסויים תקף לגבייך, עליך לבדוק את החוקים המקומיים."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"ברכותינו, ההתקנה הסתיימה.\n"
"עליך להוציא את תקליטור ההתקנה ולאחר מכן ללחוץ על \"הפעלה מחדש\" להמשך.\n"
"\n"
"\n"
"למידע אודות חבילות התיקונים הזמינים עבור גרסה זאת של מנדרייק-לינוקס,\n"
"יש לבדוק את המידע הזמין בכתובת האינטרנט:\n"
"\n"
"%s\n"
"\n"
"\n"
"מידע על הגדרת תצורת המערכת שלך, נמצא בפרק \"לאחר התקנה\" \n"
"של המדריך הרשמי למשתמשי מנדרייק-לינוקס."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrakelinux.com/en/101errata.php3"
msgstr "http://www.mandrakelinux.com/en/101errata.php3"

#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr "משכפל נקודת עיגון %s"

#: install_steps.pm:477
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"מספר חבילות חשובות לא הותקנו כראוי.\n"
"כנראה שיש בעיה בכונן התקליטורים או בתקליטור(י) ההתקנה. יש לבדוק\n"
"את תקליטור(י) ההתקנה על מחשב מותקן בעזרת \"rpm -qpl media/main/*.rpm\"\n"

#: install_steps.pm:603
#, c-format
msgid "No floppy drive available"
msgstr "אין כונן תקליטונים זמין"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "נכנס לשלב `%s'\n"

#: install_steps_gtk.pm:184
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"המערכת שלך בעלת משאבים נמוכים. במהלךהתקנת מנדרייק-לינוקס עלולות להופיע\n"
"בעיות. במקרה שכזה, ניתן להתקין בעזרת ממשק טקסטואלי. להתקנה טקסטואלית יש \n"
"ללחוץ על מקש F1 כאשר מאתחלים מהתקליטור ולהכניס 'text' בשורת הפקודה."

#: install_steps_gtk.pm:235 install_steps_interactive.pm:628
#, c-format
msgid "Package Group Selection"
msgstr "בחירת קבוצת חבילות לפי נושא"

#: install_steps_gtk.pm:264 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "גודל כללי: %d / %d MB"

#: install_steps_gtk.pm:309
#, c-format
msgid "Bad package"
msgstr "חבילה פגומה"

#: install_steps_gtk.pm:311
#, c-format
msgid "Version: "
msgstr "גרסה: "

#: install_steps_gtk.pm:312
#, c-format
msgid "Size: "
msgstr "גודל: "

#: install_steps_gtk.pm:312
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:313
#, c-format
msgid "Importance: "
msgstr "חשיבות: "

#: install_steps_gtk.pm:346
#, c-format
msgid "You can't select/unselect this package"
msgstr "אי אפשר לבחור/לבטל את החבילה הזו"

#: install_steps_gtk.pm:350
#, c-format
msgid "due to missing %s"
msgstr "בגלל שחסר %s"

#: install_steps_gtk.pm:351
#, c-format
msgid "due to unsatisfied %s"
msgstr "עקב תלות %s שלא מולאה"

#: install_steps_gtk.pm:352
#, c-format
msgid "trying to promote %s"
msgstr "מנסה לקדם %s"

#: install_steps_gtk.pm:353
#, c-format
msgid "in order to keep %s"
msgstr "בכדי לשמור %s"

#: install_steps_gtk.pm:358
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "אי אפשר לבחור בחבילה זו מכיוון שלא נותר מספיק מקום פנוי להתקינה"

#: install_steps_gtk.pm:361
#, c-format
msgid "The following packages are going to be installed"
msgstr "החבילות הבאות עומדות להיות מותקנות"

#: install_steps_gtk.pm:362
#, c-format
msgid "The following packages are going to be removed"
msgstr "החבילות הבאות עומדות להיות מוסרות"

#: install_steps_gtk.pm:386
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "זוהי חבילה בסיסית, אי אפשר לבטל את בחירתה"

#: install_steps_gtk.pm:388
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "אין אפשרות לבטל חבילה זו מכיוון שהיא כבר מותקנת"

#: install_steps_gtk.pm:391
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"חובה לשדרג חבילה זו.\n"
"האם באמת ברצונך לבטל את בחירתה?"

#: install_steps_gtk.pm:394
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "לא ניתן לבטל את בחירת חבילה זו, חובה לשדרג אותה"

#: install_steps_gtk.pm:399
#, c-format
msgid "Show automatically selected packages"
msgstr "הראה חבילות שנבחרו באופן אוטומטי"

#: install_steps_gtk.pm:404
#, c-format
msgid "Load/Save on floppy"
msgstr "טען/שמור בתקליטון"

#: install_steps_gtk.pm:405
#, c-format
msgid "Updating package selection"
msgstr "עדכון בחירת חבילות"

#: install_steps_gtk.pm:410
#, c-format
msgid "Minimal install"
msgstr "התקנה מינימלית"

#: install_steps_gtk.pm:424 install_steps_interactive.pm:481
#, c-format
msgid "Choose the packages you want to install"
msgstr "עליך לבחור את החבילות שברצונך להתקין:"

#: install_steps_gtk.pm:440 install_steps_interactive.pm:720
#, c-format
msgid "Installing"
msgstr "מתקין"

#: install_steps_gtk.pm:447
#, c-format
msgid "Estimating"
msgstr "נותרו"

#: install_steps_gtk.pm:453
#, c-format
msgid "Time remaining "
msgstr "זמן נותר "

#: install_steps_gtk.pm:464
#, c-format
msgid "Please wait, preparing installation..."
msgstr "נא להמתין, מבצע הכנות להתקנה..."

#: install_steps_gtk.pm:474
#, c-format
msgid "No details"
msgstr "ללא פרטים"

#: install_steps_gtk.pm:527
#, c-format
msgid "%d packages"
msgstr "%d חבילות"

#: install_steps_gtk.pm:532
#, c-format
msgid "Installing package %s"
msgstr "מתקין חבילה - %s"

#: install_steps_gtk.pm:567 install_steps_interactive.pm:94
#: install_steps_interactive.pm:745
#, c-format
msgid "Refuse"
msgstr "סירוב"

#: install_steps_gtk.pm:571 install_steps_interactive.pm:749
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"יש להחליף תקליטור!\n"
"\n"
"עליך להכניס את התקליטור \"%s\" לכונן\n"
"ולאחר מכן ללחוץ על כפתור \"אישור\". אם תקליטור זה אינו ברשותך,\n"
"עליך ללחוץ על כפתור \"ביטול\" בכדי לדלג על התקנת חבילות אלו."

#: install_steps_gtk.pm:586 install_steps_interactive.pm:760
#, c-format
msgid "There was an error ordering packages:"
msgstr "התרחשה שגיאה בסידור חבילות:"

#: install_steps_gtk.pm:586 install_steps_gtk.pm:590
#: install_steps_interactive.pm:760 install_steps_interactive.pm:764
#, c-format
msgid "Go on anyway?"
msgstr "האם להמשיך בכל מקרה?"

#: install_steps_gtk.pm:590 install_steps_interactive.pm:764
#, c-format
msgid "There was an error installing packages:"
msgstr "התרחשה שגיאה בהתקנת החבילות:"

#: install_steps_gtk.pm:632 install_steps_interactive.pm:934
#: install_steps_interactive.pm:1086
#, c-format
msgid "not configured"
msgstr "לא מוגדר"

#: install_steps_interactive.pm:86
#, c-format
msgid "Do you want to recover your system?"
msgstr "האם ברצונך לשחזר את המערכת?"

#: install_steps_interactive.pm:87
#, c-format
msgid "License agreement"
msgstr "הסכם משתמש"

#: install_steps_interactive.pm:91
#, c-format
msgid "Release Notes"
msgstr "הערות שחרור"

#: install_steps_interactive.pm:121
#, c-format
msgid "Please choose your keyboard layout."
msgstr "בשלב זה עליך להגדיר את פריסת המקלדת שלך:"

#: install_steps_interactive.pm:123
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "להלן הרשימה המלאה של המדפסות הזמינות"

#: install_steps_interactive.pm:153
#, c-format
msgid "Install/Upgrade"
msgstr "התקנה/עדכון"

#: install_steps_interactive.pm:154
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "האם זו התקנה או שידרוג?"

#: install_steps_interactive.pm:160
#, c-format
msgid "Upgrade %s"
msgstr "שידרוג %s"

#: install_steps_interactive.pm:170
#, c-format
msgid "Encryption key for %s"
msgstr "מפתח הצפנה עבור %s"

#: install_steps_interactive.pm:187
#, c-format
msgid "Please choose your type of mouse."
msgstr ""
"במסך זה עליך לבחור את דגם העכבר\n"
"שלך ואת הממשק אליו העכבר מחובר:"

#: install_steps_interactive.pm:196 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "ממשק העכבר"

#: install_steps_interactive.pm:197 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "נא לבחור לאיזה יציאה טורית העכבר שלך מחובר"

#: install_steps_interactive.pm:207
#, c-format
msgid "Buttons emulation"
msgstr "הדמיית כפתורים"

#: install_steps_interactive.pm:209
#, c-format
msgid "Button 2 Emulation"
msgstr "הדמיית כפתור שני"

#: install_steps_interactive.pm:210
#, c-format
msgid "Button 3 Emulation"
msgstr "הדמיית כפתור שלישי"

#: install_steps_interactive.pm:231
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:231
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "מגדיר כרטיסי PCMCIA..."

#: install_steps_interactive.pm:238
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:238
#, c-format
msgid "Configuring IDE"
msgstr "מגדיר IDE"

#: install_steps_interactive.pm:258 network/tools.pm:187
#, c-format
msgid "No partition available"
msgstr "אין מחיצות זמינות"

#: install_steps_interactive.pm:261
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "סורק את המחיצות כדי למצוא נקודות עיגון"

#: install_steps_interactive.pm:268
#, c-format
msgid "Choose the mount points"
msgstr "יש לבחור את נקודות העיגון"

#: install_steps_interactive.pm:300
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:337
#, c-format
msgid "Choose the partitions you want to format"
msgstr "עליך לבחור את המחיצה(ות) שברצונך לפרמט"

#: install_steps_interactive.pm:339
#, c-format
msgid "Check bad blocks?"
msgstr "האם לבדוק בלוקים עם שגיאות?"

#: install_steps_interactive.pm:371
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"כישלון בבדיקת מערכת הקבצים %s. האם ברצונך לתקן את השגיאות? (המידע עלול "
"להינזק)"

#: install_steps_interactive.pm:374
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "אין מספיק זיכרון החלפה להמשך ההתקנה, יש להגדיל את הזיכרון"

#: install_steps_interactive.pm:381
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "מחפש חבילות זמינות ובונה את בסיס נתוני החבילות..."

#: install_steps_interactive.pm:382 install_steps_interactive.pm:442
#, c-format
msgid "Looking for available packages..."
msgstr "מחפש חבילות זמינות..."

#: install_steps_interactive.pm:385
#, c-format
msgid "Looking at packages already installed..."
msgstr "מחפש חבילות שכבר מותקנות..."

#: install_steps_interactive.pm:389
#, c-format
msgid "Finding packages to upgrade..."
msgstr "מאתר חבילות שיש לשדרג..."

#: install_steps_interactive.pm:405 install_steps_interactive.pm:834
#, c-format
msgid ""
"Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr "מתחבר לאתר מנדרייק-לינוקס בכדי לקבל רשימה של אתרי מראה זמינים..."

#: install_steps_interactive.pm:411 install_steps_interactive.pm:839
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "עליך לבחור את אתר המראה ממנו יורדו החבילות"

#: install_steps_interactive.pm:451
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "למערכת שלך אין מספיק שטח פנוי להתקנה או שדרוג (%d > %d)"

#: install_steps_interactive.pm:493
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: install_steps_interactive.pm:495
#, c-format
msgid "Load from floppy"
msgstr "טעינה מתקליטון"

#: install_steps_interactive.pm:495
#, c-format
msgid "Save on floppy"
msgstr "שמירה על תקליטון"

#: install_steps_interactive.pm:499
#, c-format
msgid "Package selection"
msgstr "בחירת חבילות"

#: install_steps_interactive.pm:499
#, c-format
msgid "Loading from floppy"
msgstr "טוען מהתקליטון"

#: install_steps_interactive.pm:504
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "נא להכניס תקליטון הכולל בחירת חבילות"

#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr "הגודל הנבחר גדול יותר מהמקום הזמין"

#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr "סוג ההתקנה"

#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"לא נבחרה אף קבוצה של חבילות.\n"
"נא לבחור את ההתקנה המינימלית שברצונך לבצע:"

#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "עם מסמכים בסיסיים (מומלץ!)"

#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "התקנה מינימלית אמיתית (בייחוד לא urpmi)"

#: install_steps_interactive.pm:645 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "הכל"

#: install_steps_interactive.pm:694
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"אם יש לך את כל התקליטורים הרשומים להלן יש ללחוץ אישור.\n"
"אם אין לך אף תקליטור יש ללחוץ ביטול.\n"
"אם חסרים לך תקליטורים מסוימים יש לבטל בחירתם ואז ללחוץ אישור."

#: install_steps_interactive.pm:699
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "תקליטור המסומן \"%s\""

#: install_steps_interactive.pm:720
#, c-format
msgid "Preparing installation"
msgstr "מכין את ההתקנה"

#: install_steps_interactive.pm:729
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"מתקין חבילה %s\n"
"%d%%"

#: install_steps_interactive.pm:778
#, c-format
msgid "Post-install configuration"
msgstr "מבצע הגדרות לאחר-התקנה"

#: install_steps_interactive.pm:784
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "נא להכניס את תקליטון עדכון המודולים לכונן %s"

#: install_steps_interactive.pm:813
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"שלב זה מאפשר לך להוריד ולהתקין חבילות עדכון. חבילות אלה עודכנו לאחר שחרור "
"ההפצה,\n"
"ועשויות להכיל עדכוני אבטחה ו/או עדכוני תוכנה חשובים.\n"
"\n"
"להורדת חבילות אלה נדרש חיבור אינטרנט עובד. האם ברצונך לעדכן את המערכת בשלב "
"זה ?"

#: install_steps_interactive.pm:853
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "מתחבר לאתר המראה כדי לקבל את רשימת החבילות הזמינות..."

#: install_steps_interactive.pm:857
#, c-format
msgid "Unable to contact mirror %s"
msgstr "לא יכול להתחבר לאתר המראה  %s"

#: install_steps_interactive.pm:857
#, c-format
msgid "Would you like to try again?"
msgstr "האם ברצונך לנסות שנית?"

#: install_steps_interactive.pm:883 standalone/drakclock:46
#, c-format
msgid "Which is your timezone?"
msgstr "מהו אזור הזמן שלך?"

#: install_steps_interactive.pm:888
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "סנכרון זמן אוטומטי (שימוש ב-NTP)"

#: install_steps_interactive.pm:896
#, c-format
msgid "NTP Server"
msgstr "שרת NTP"

#: install_steps_interactive.pm:938 steps.pm:30
#, c-format
msgid "Summary"
msgstr "סיכום ובדיקת הגדרות"

#: install_steps_interactive.pm:951 install_steps_interactive.pm:959
#: install_steps_interactive.pm:977 install_steps_interactive.pm:984
#: install_steps_interactive.pm:1136 services.pm:135
#: standalone/drakbackup:1593
#, c-format
msgid "System"
msgstr "מערכת"

#: install_steps_interactive.pm:991 install_steps_interactive.pm:1018
#: install_steps_interactive.pm:1035 install_steps_interactive.pm:1051
#: install_steps_interactive.pm:1062
#, c-format
msgid "Hardware"
msgstr "חומרה"

#: install_steps_interactive.pm:997 install_steps_interactive.pm:1006
#, c-format
msgid "Remote CUPS server"
msgstr "שרת CUPS מרוחק"

#: install_steps_interactive.pm:997
#, c-format
msgid "No printer"
msgstr "ללא מדפסת"

#: install_steps_interactive.pm:1039
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "האם יש לך כרטיס קול ISA?"

#: install_steps_interactive.pm:1041
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"עליך להריץ \"alsaconf\" או \"sndconfig\" אחרי ההתקנה בכדי להגדיר את כרטיס "
"הקול שלך"

#: install_steps_interactive.pm:1043
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "לא זוהו כרטיסי קול. יש לנסות את האשף \"harddrake\"  לאחר ההתקנה"

#: install_steps_interactive.pm:1063
#, c-format
msgid "Graphical interface"
msgstr "ממשק גרפי"

#: install_steps_interactive.pm:1069 install_steps_interactive.pm:1084
#, c-format
msgid "Network & Internet"
msgstr "רשת ואינטרנט"

#: install_steps_interactive.pm:1086
#, c-format
msgid "configured"
msgstr "מוגדר"

#: install_steps_interactive.pm:1095 install_steps_interactive.pm:1109
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "הגדרות אבטחה"

#: install_steps_interactive.pm:1114
#, c-format
msgid "activated"
msgstr "פועל"

#: install_steps_interactive.pm:1114
#, c-format
msgid "disabled"
msgstr "מנותק"

#: install_steps_interactive.pm:1123
#, c-format
msgid "Boot"
msgstr "אתחול"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1127
#, c-format
msgid "%s on %s"
msgstr "%s על %s"

#: install_steps_interactive.pm:1141 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "%d שרותים מופעלים מתוך %d שרותים מוגדרים"

#: install_steps_interactive.pm:1151
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "לא הוגדר ממשק גרפי (X). האם אכן ברצונך לבחור אפשרות זו?"

#: install_steps_interactive.pm:1205
#, c-format
msgid "Set root password and network authentication methods"
msgstr "קביעת סיסמת מנהל ושיטות זיהוי מבוססות רשת"

#: install_steps_interactive.pm:1206
#, c-format
msgid "Set root password"
msgstr "הגדרת סיסמת מנהל (root)"

#: install_steps_interactive.pm:1217
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "הסיסמה הזו קצרה מדי (חייבת להכיל לפחות %d אותיות או סימנים)"

#: install_steps_interactive.pm:1222 network/netconnect.pm:596
#: standalone/drakauth:25 standalone/drakauth:27 standalone/drakconnect:457
#, c-format
msgid "Authentication"
msgstr "אימות"

#: install_steps_interactive.pm:1254
#, c-format
msgid "Preparing bootloader..."
msgstr "מכין את מנהל האתחול..."

#: install_steps_interactive.pm:1264
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""

#: install_steps_interactive.pm:1270
#, c-format
msgid "Do you want to use aboot?"
msgstr "האם ברצונך להשתמש בaboot?"

#: install_steps_interactive.pm:1273
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"שגיאה בהתקנת aboot,\n"
"האם לנסות לאלץ את ההתקנה אפילו אם המחיצה הראשונה עלולה להיהרס?"

#: install_steps_interactive.pm:1294
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1322 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "נא להכניס תקליטון ריק לכונן %s"

#: install_steps_interactive.pm:1327
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "נא להכניס תקליטון אחר בשביל מנהלי התקנים"

#: install_steps_interactive.pm:1329
#, c-format
msgid "Creating auto install floppy..."
msgstr "יוצר תקליטון הפעלה אוטומטית..."

#: install_steps_interactive.pm:1341
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"חלק מהשלבים לא הושלמו.\n"
"\n"
"האם באמת ברצונך לצאת עכשיו?"

#: install_steps_interactive.pm:1356
#, c-format
msgid "Generate auto install floppy"
msgstr "בניית תקליטון הפעלה אוטומטית"

#: install_steps_interactive.pm:1358
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"יש באפשרותך לבצע התקנות חוזרות באופן אוטומטי לחלוטין.\n"
"במקרה זה יימחק כל תוכן הכונן הקשיח!!\n"
"תכונה זו שימושית להתקנת המערכת על מספר רב של מחשבים.\n"
"\n"
"באם אינך רוצה במחיקת כל תוכן הכונן הקשיח יש לבחור במנגנון שחזור ההתקנה.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr "התקנת מנדרייק-לינוקס %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "<Tab>/<Alt-Tab>  בין אלמנטים  | <Space> בחירה | <F12> מסך הבא"

#: interactive.pm:170
#, c-format
msgid "Choose a file"
msgstr "יש לבחור קובץ"

#: interactive.pm:295 interactive/gtk.pm:482 standalone/drakbackup:1534
#: standalone/drakfont:592 standalone/drakfont:659 standalone/drakups:297
#: standalone/drakups:357 standalone/drakups:377 standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Add"
msgstr "הוספה"

#: interactive.pm:295 interactive/gtk.pm:482
#, c-format
msgid "Modify"
msgstr "שינוי"

#: interactive.pm:295 interactive/gtk.pm:482 standalone/drakups:299
#: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Remove"
msgstr "הסרה"

#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr "בסיסי"

#: interactive.pm:403 interactive/newt.pm:317 ugtk2.pm:515
#, c-format
msgid "Finish"
msgstr "סיום"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "עשה"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "בחירה גרועה, יש לנסות שנית\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "מהי הבחירה שלך? ( ברירת מחדל %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"כניסות שיש צורך למלא:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "מהי בחירתך? (0/1, ברירת מחדל `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "כפתור `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "האם ברצונך ללחוץ על כפתור זה?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "מהי בחירתך? (ברירת מחדל `%s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> יש דברים רבים לבחור מתוך (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"נא לבחור את המספר הראשון מהטווח של 10 שברצונך לערוך, \n"
"או ללחוץ על enter בכדי להמשיך."

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> יש לשים לב, תווית שונתה:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "טען מחדש"

#: keyboard.pm:163 keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "צ'כית (QWERTZ)"

#: keyboard.pm:164 keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "גרמנית"

#: keyboard.pm:165
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:166 keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "ספרדית"

#: keyboard.pm:167 keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "פינית"

#: keyboard.pm:168 keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "צרפתית"

#: keyboard.pm:169 keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "נורבגית"

#: keyboard.pm:170
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "פולנית"

#: keyboard.pm:171 keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "רוסית"

#: keyboard.pm:173 keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "שוודית"

#: keyboard.pm:174 keyboard.pm:287
#, c-format
msgid "UK keyboard"
msgstr "מקלדת אנגלית"

#: keyboard.pm:175 keyboard.pm:288
#, c-format
msgid "US keyboard"
msgstr "מקלדת ארה\"ב"

#: keyboard.pm:177
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "אלבנית"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "ארמנית (ישן)"

#: keyboard.pm:179
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "ארמנית (מכונות כתיבה)"

#: keyboard.pm:180
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "ארמנית (פונטית)"

#: keyboard.pm:181
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "ערבית"

#: keyboard.pm:182
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "אזרביג'אן (לטינית) "

#: keyboard.pm:183
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "בלגית"

#: keyboard.pm:184
#, c-format
msgid ""
"_: keyboard\n"
"Bengali"
msgstr "בנגאלי"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "בולגרית (פונטית)"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "בולגרית (BSD)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "ברזילאית (ABNT-2)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "בוסנית"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "בלרוסית"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "שוויץ (פריסה גרמנית)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "שווייץ (פריסה צרפתית)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "צ'כית (QWERTY)"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "גרמנית (ללא מקשים מתים)"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "Devanagari"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "דנית"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:201
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "דבורק (אספרנטו)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "דבורק (נורבגית)"

#: keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (Swedish)"

#: keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "אסטונית"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "גגורג'יאנית (פריסה \"רוסית\")"

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "גורג'יאנית (פריסה \"לטינית\")"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "יוונית"

#: keyboard.pm:212
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "יוונית (פוליטונית)"

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "Gujarati"

#: keyboard.pm:214
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "גורמוקי"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "הונגרית"

#: keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "קרואטית"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "אירי"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "מקלדת ישראלית (רגילה)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "מקלדת ישראלית (פונטית)"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "אירנית"

#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Icelandic"

#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "איטלקית"

#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "אינוקטיטוט"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "יפנית 106 תווים"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Kannada"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "מקלדת קוריאנית"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "מקלדת קירגיזית"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "אמריקה הלטינית"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "Laotian"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Lithuanian AZERTY (old)"

#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Lithuanian AZERTY (new)"

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Lithuanian \"number row\" QWERTY"

#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Lithuanian \"phonetic\" QWERTY"

#: keyboard.pm:246
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "לאטוויה"

#: keyboard.pm:247
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "Malayalam"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "מקדונית"

#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "Myanmar (Burmese)"

#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "מוגולית (קירילית)"

#: keyboard.pm:251
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "מלטה (UK)"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "מלטה (ארה\"ב)"

#: keyboard.pm:253
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "צ'כית"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "אוריה"

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "פולנית (פריסת qwerty)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "פולנית (פריסת qwetrz)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "פורטוגזית"

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "קנדית (קויבק)"

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "רומנית (qwertz)"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "רומנית (qwerty)"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "רוסית (פונטית)"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "סאמי (נורבגית)"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr "Saami (swedish/finnish)"

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "סלובנית"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "סלובקית (QWERTZ)"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "סלובקית (QWERTY)"

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "סרבית (קרילית)"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "סוריה"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "סורית (פונטית)"

#: keyboard.pm:276
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "טאלוגו"

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "Tamil (ISCII-layout)"

#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Tamil (Typewriter-layout)"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Thai"
msgstr "מדלקת תאילנדית"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Tajik"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "טורקית (מודל \"F\" מסורתי)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "טורקית (דגם \"Q\" מודרני)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "אוקראינית"

#: keyboard.pm:289
#, c-format
msgid "US keyboard (international)"
msgstr "מקלדת ארה\"ב (בינלאומית)"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Uzbek (cyrillic)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "וייטנמית \"מספרים בשורה\"  QWERTY"

#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "יוגוסלבית (latin)"

#: keyboard.pm:300
#, c-format
msgid "Right Alt key"
msgstr "מקש Alt הימני"

#: keyboard.pm:301
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "שני מקשי ה-Shift בו זמנית"

#: keyboard.pm:302
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "מקשי Ctrl ו-Shift בו-זמנית"

#: keyboard.pm:303
#, c-format
msgid "CapsLock key"
msgstr "מקש CapsLock"

#: keyboard.pm:304
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "מקשי Shift ו-CapsLock בו זמנית"

#: keyboard.pm:305
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "מקשי Ctrl ו-Alt בו זמנית"

#: keyboard.pm:306
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "מקשי Alt ו-Shift בו זמנית"

#: keyboard.pm:307
#, c-format
msgid "\"Menu\" key"
msgstr "מקש \"תפריט\""

#: keyboard.pm:308
#, c-format
msgid "Left \"Windows\" key"
msgstr "מקש \"חלונות\" השמאלי"

#: keyboard.pm:309
#, c-format
msgid "Right \"Windows\" key"
msgstr "מקש \"חלונות\" הימני"

#: keyboard.pm:310
#, c-format
msgid "Both Control keys simultaneously"
msgstr "שני מקשי ה-Control בו זמנית"

#: keyboard.pm:311
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "שני מקשי ה-Alt בו זמנית"

#: keyboard.pm:312
#, c-format
msgid "Left Shift key"
msgstr "מקש Shift השמאלי"

#: keyboard.pm:313
#, c-format
msgid "Right Shift key"
msgstr "מקש Shift הימני"

#: keyboard.pm:314
#, c-format
msgid "Left Alt key"
msgstr "מקש Alt השמאלי"

#: keyboard.pm:315
#, c-format
msgid "Left Control key"
msgstr "מקש Control השמאלי"

#: keyboard.pm:316
#, c-format
msgid "Right Control key"
msgstr "מקש Control הימני"

#: keyboard.pm:347
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"בשלב זה עליך לבחור את שילוב המקשים שיאפשר לך להחליף\n"
"בין פריסות מקלדת שונות שהגדרת, ואשר מייצגות שפות שונות:"

#: keyboard.pm:352
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"לידיעתך, הגדרת המקשים להחלפת פריסת מקלדת\n"
"תופעל רק לאחר ההתקנה. במהלך ההתקנה עצמה,\n"
"מקש Control הימני משמש להחלפת פריסת מקלדת."

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:165
#, c-format
msgid "default:LTR"
msgstr "default:RTL"

#: lang.pm:182
#, c-format
msgid "Andorra"
msgstr "אנדורה"

#: lang.pm:183
#, c-format
msgid "United Arab Emirates"
msgstr "איחוד הנסיכויות הערביות"

#: lang.pm:184
#, c-format
msgid "Afghanistan"
msgstr "אפגניסטן"

#: lang.pm:185
#, c-format
msgid "Antigua and Barbuda"
msgstr "אנטיגה וברבודה"

#: lang.pm:186
#, c-format
msgid "Anguilla"
msgstr "אנגוויה"

#: lang.pm:187
#, c-format
msgid "Albania"
msgstr "אלבניה"

#: lang.pm:188
#, c-format
msgid "Armenia"
msgstr "ארמניה"

#: lang.pm:189
#, c-format
msgid "Netherlands Antilles"
msgstr "האנטילים ההולנדיים"

#: lang.pm:190
#, c-format
msgid "Angola"
msgstr "אנגולה"

#: lang.pm:191
#, c-format
msgid "Antarctica"
msgstr "אנטארקטיקה"

#: lang.pm:192 network/adsl_consts.pm:28 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "ארגנטינה"

#: lang.pm:193
#, c-format
msgid "American Samoa"
msgstr "סמואה האמריקאית"

#: lang.pm:195 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "אוסטרליה"

#: lang.pm:196
#, c-format
msgid "Aruba"
msgstr "ארובה"

#: lang.pm:197
#, c-format
msgid "Azerbaijan"
msgstr "אזרביג'אן"

#: lang.pm:198
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "בוסניה-הרצגובינה"

#: lang.pm:199
#, c-format
msgid "Barbados"
msgstr "ברבדוס"

#: lang.pm:200
#, c-format
msgid "Bangladesh"
msgstr "בנגלדש"

#: lang.pm:202
#, c-format
msgid "Burkina Faso"
msgstr "בורקינה פאסו"

#: lang.pm:203 network/adsl_consts.pm:126 network/adsl_consts.pm:134
#, c-format
msgid "Bulgaria"
msgstr "בולגריה"

#: lang.pm:204
#, c-format
msgid "Bahrain"
msgstr "בחריין"

#: lang.pm:205
#, c-format
msgid "Burundi"
msgstr "בורונדי"

#: lang.pm:206
#, c-format
msgid "Benin"
msgstr "בינן (דהומיי)"

#: lang.pm:207
#, c-format
msgid "Bermuda"
msgstr "ברמודה"

#: lang.pm:208
#, c-format
msgid "Brunei Darussalam"
msgstr "בורני דורסלם"

#: lang.pm:209
#, c-format
msgid "Bolivia"
msgstr "בוליביה"

#: lang.pm:210 network/adsl_consts.pm:92 network/adsl_consts.pm:102
#: network/adsl_consts.pm:110 network/adsl_consts.pm:118
#, c-format
msgid "Brazil"
msgstr "ברזיל"

#: lang.pm:211
#, c-format
msgid "Bahamas"
msgstr "איי בהאמה"

#: lang.pm:212
#, c-format
msgid "Bhutan"
msgstr "בהוטן"

#: lang.pm:213
#, c-format
msgid "Bouvet Island"
msgstr "אי Bouvet"

#: lang.pm:214
#, c-format
msgid "Botswana"
msgstr "בוטסואנה"

#: lang.pm:215
#, c-format
msgid "Belarus"
msgstr "בלרוס"

#: lang.pm:216
#, c-format
msgid "Belize"
msgstr "בליז"

#: lang.pm:217
#, c-format
msgid "Canada"
msgstr "קנדה"

#: lang.pm:218
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "איי קוקוס (Keeling)"

#: lang.pm:219
#, c-format
msgid "Congo (Kinshasa)"
msgstr "קונגו (קינסהסה)"

#: lang.pm:220
#, c-format
msgid "Central African Republic"
msgstr "הרפובליקה המרכז-אפריקאית"

#: lang.pm:221
#, c-format
msgid "Congo (Brazzaville)"
msgstr "קונגו (Brazzaville)"

#: lang.pm:222 network/adsl_consts.pm:568 network/adsl_consts.pm:575
#, c-format
msgid "Switzerland"
msgstr "שוייץ"

#: lang.pm:223
#, c-format
msgid "Cote d'Ivoire"
msgstr "חוף השנהב"

#: lang.pm:224
#, c-format
msgid "Cook Islands"
msgstr "איי קוק"

#: lang.pm:225
#, c-format
msgid "Chile"
msgstr "צ'ילה"

#: lang.pm:226
#, c-format
msgid "Cameroon"
msgstr "קמרון"

#: lang.pm:227 network/adsl_consts.pm:142 network/adsl_consts.pm:150
#: network/adsl_consts.pm:158 network/adsl_consts.pm:166
#: network/adsl_consts.pm:174 network/adsl_consts.pm:182
#: network/adsl_consts.pm:190 network/adsl_consts.pm:198
#: network/adsl_consts.pm:206 network/adsl_consts.pm:214
#: network/adsl_consts.pm:222 network/adsl_consts.pm:230
#: network/adsl_consts.pm:238 network/adsl_consts.pm:246
#: network/adsl_consts.pm:254 network/adsl_consts.pm:262
#: network/adsl_consts.pm:270 network/adsl_consts.pm:278
#: network/adsl_consts.pm:286 network/adsl_consts.pm:294
#, c-format
msgid "China"
msgstr "סין"

#: lang.pm:228
#, c-format
msgid "Colombia"
msgstr "קולומביה"

#: lang.pm:230
#, c-format
msgid "Serbia & Montenegro"
msgstr "סרביה ומונטנגרו"

#: lang.pm:231
#, c-format
msgid "Cuba"
msgstr "קובה"

#: lang.pm:232
#, c-format
msgid "Cape Verde"
msgstr "Cape Verde"

#: lang.pm:233
#, c-format
msgid "Christmas Island"
msgstr "איי חַג הַמּוֹלָד"

#: lang.pm:234
#, c-format
msgid "Cyprus"
msgstr "קפריסין"

#: lang.pm:237
#, c-format
msgid "Djibouti"
msgstr "ג'יבוטי"

#: lang.pm:238 network/adsl_consts.pm:302
#, c-format
msgid "Denmark"
msgstr "דנמרק"

#: lang.pm:239
#, c-format
msgid "Dominica"
msgstr "דומיניקה"

#: lang.pm:240
#, c-format
msgid "Dominican Republic"
msgstr "הרפובליקה הדומיניקנית"

#: lang.pm:241
#, c-format
msgid "Algeria"
msgstr "אלג'יריה"

#: lang.pm:242
#, c-format
msgid "Ecuador"
msgstr "אקוודור"

#: lang.pm:243
#, c-format
msgid "Estonia"
msgstr "אסטוניה"

#: lang.pm:244
#, c-format
msgid "Egypt"
msgstr "מצריים"

#: lang.pm:245
#, c-format
msgid "Western Sahara"
msgstr "סהרה המערבית"

#: lang.pm:246
#, c-format
msgid "Eritrea"
msgstr "אריתריאה"

#: lang.pm:247 network/adsl_consts.pm:531 network/adsl_consts.pm:540
#: network/adsl_consts.pm:551
#, c-format
msgid "Spain"
msgstr "ספרד"

#: lang.pm:248
#, c-format
msgid "Ethiopia"
msgstr "אתיופיה"

#: lang.pm:249 network/adsl_consts.pm:402
#, c-format
msgid "Finland"
msgstr "פינלנד"

#: lang.pm:250
#, c-format
msgid "Fiji"
msgstr "פיג'י"

#: lang.pm:251
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "איי פוקלנד (מאלבינאס) "

#: lang.pm:252
#, c-format
msgid "Micronesia"
msgstr "מיקרונזיה"

#: lang.pm:253
#, c-format
msgid "Faroe Islands"
msgstr "איי פארו"

#: lang.pm:255
#, c-format
msgid "Gabon"
msgstr "גבון"

#: lang.pm:256 network/adsl_consts.pm:593 network/adsl_consts.pm:601
#: network/netconnect.pm:52
#, c-format
msgid "United Kingdom"
msgstr "בריטניה"

#: lang.pm:257
#, c-format
msgid "Grenada"
msgstr "גרנדה"

#: lang.pm:258
#, c-format
msgid "Georgia"
msgstr "ג'ורג'יה"

#: lang.pm:259
#, c-format
msgid "French Guiana"
msgstr "גיאנה הצרפתית"

#: lang.pm:260
#, c-format
msgid "Ghana"
msgstr "גאנה"

#: lang.pm:261
#, c-format
msgid "Gibraltar"
msgstr "ג'יברלטר"

#: lang.pm:262
#, c-format
msgid "Greenland"
msgstr "גרינלנד"

#: lang.pm:263
#, c-format
msgid "Gambia"
msgstr "גמביה"

#: lang.pm:264
#, c-format
msgid "Guinea"
msgstr "גינאה"

#: lang.pm:265
#, c-format
msgid "Guadeloupe"
msgstr "גוואדלופ"

#: lang.pm:266
#, c-format
msgid "Equatorial Guinea"
msgstr "גיניאה המשוונית"

#: lang.pm:268
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "דרום ג'ורג'יה ואיי סנדוויץ' הדרומיים"

#: lang.pm:269
#, c-format
msgid "Guatemala"
msgstr "גואטמלה"

#: lang.pm:270
#, c-format
msgid "Guam"
msgstr "גואם"

#: lang.pm:271
#, c-format
msgid "Guinea-Bissau"
msgstr "גיניאה ביסאו"

#: lang.pm:272
#, c-format
msgid "Guyana"
msgstr "גיאנה"

#: lang.pm:273
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "סין (הונג קונג)"

#: lang.pm:274
#, c-format
msgid "Heard and McDonald Islands"
msgstr "איי Heard ו-McDonald"

#: lang.pm:275
#, c-format
msgid "Honduras"
msgstr "הונדורס"

#: lang.pm:276
#, c-format
msgid "Croatia"
msgstr "קרואטיה"

#: lang.pm:277
#, c-format
msgid "Haiti"
msgstr "האיטי"

#: lang.pm:278 network/adsl_consts.pm:436
#, c-format
msgid "Hungary"
msgstr "הונגריה"

#: lang.pm:279
#, c-format
msgid "Indonesia"
msgstr "אינדונזיה"

#: lang.pm:280 network/adsl_consts.pm:444 standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "אירלנד"

#: lang.pm:281
#, c-format
msgid "Israel"
msgstr "ישראל"

#: lang.pm:282
#, c-format
msgid "India"
msgstr "הודו"

#: lang.pm:283
#, c-format
msgid "British Indian Ocean Territory"
msgstr "טריטוריית האוקיינוס הבריטי-הודי"

#: lang.pm:284
#, c-format
msgid "Iraq"
msgstr "עירק"

#: lang.pm:285
#, c-format
msgid "Iran"
msgstr "אירן"

#: lang.pm:286
#, c-format
msgid "Iceland"
msgstr "איסלנד"

#: lang.pm:288
#, c-format
msgid "Jamaica"
msgstr "ג'מייקה"

#: lang.pm:289
#, c-format
msgid "Jordan"
msgstr "ירדן"

#: lang.pm:290
#, c-format
msgid "Japan"
msgstr "יפן"

#: lang.pm:291
#, c-format
msgid "Kenya"
msgstr "קניה"

#: lang.pm:292
#, c-format
msgid "Kyrgyzstan"
msgstr "קירגיסטן"

#: lang.pm:293
#, c-format
msgid "Cambodia"
msgstr "קמבודיה"

#: lang.pm:294
#, c-format
msgid "Kiribati"
msgstr "קיריבטי"

#: lang.pm:295
#, c-format
msgid "Comoros"
msgstr "איי קומורו"

#: lang.pm:296
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "סנט קיטס ונוויס"

#: lang.pm:297
#, c-format
msgid "Korea (North)"
msgstr "קוריאה (צפון)"

#: lang.pm:298
#, c-format
msgid "Korea"
msgstr "קוריאה"

#: lang.pm:299
#, c-format
msgid "Kuwait"
msgstr "כווית"

#: lang.pm:300
#, c-format
msgid "Cayman Islands"
msgstr "איי קיימאן"

#: lang.pm:301
#, c-format
msgid "Kazakhstan"
msgstr "קזחסטן"

#: lang.pm:302
#, c-format
msgid "Laos"
msgstr "לאוס"

#: lang.pm:303
#, c-format
msgid "Lebanon"
msgstr "לבנון"

#: lang.pm:304
#, c-format
msgid "Saint Lucia"
msgstr "סנט לוצ'יה"

#: lang.pm:305
#, c-format
msgid "Liechtenstein"
msgstr "ליכטנשטיין"

#: lang.pm:306
#, c-format
msgid "Sri Lanka"
msgstr "סרי לנקה"

#: lang.pm:307
#, c-format
msgid "Liberia"
msgstr "ליבריה"

#: lang.pm:308
#, c-format
msgid "Lesotho"
msgstr "לסוטו"

#: lang.pm:309 network/adsl_consts.pm:479
#, c-format
msgid "Lithuania"
msgstr "ליטא"

#: lang.pm:310
#, c-format
msgid "Luxembourg"
msgstr "לוכסמבורג"

#: lang.pm:311
#, c-format
msgid "Latvia"
msgstr "לטוויה"

#: lang.pm:312
#, c-format
msgid "Libya"
msgstr "לוב"

#: lang.pm:313 network/adsl_consts.pm:487
#, c-format
msgid "Morocco"
msgstr "מרוקו"

#: lang.pm:314
#, c-format
msgid "Monaco"
msgstr "מונקו"

#: lang.pm:315
#, c-format
msgid "Moldova"
msgstr "מולדובה"

#: lang.pm:316
#, c-format
msgid "Madagascar"
msgstr "מדגסקר"

#: lang.pm:317
#, c-format
msgid "Marshall Islands"
msgstr "איי מרשל"

#: lang.pm:318
#, c-format
msgid "Macedonia"
msgstr "מקדוניה"

#: lang.pm:319
#, c-format
msgid "Mali"
msgstr "מאלי"

#: lang.pm:320
#, c-format
msgid "Myanmar"
msgstr "מיאנמר"

#: lang.pm:321
#, c-format
msgid "Mongolia"
msgstr "מונגוליה"

#: lang.pm:322
#, c-format
msgid "Northern Mariana Islands"
msgstr "איי מריאנה הצפוניים"

#: lang.pm:323
#, c-format
msgid "Martinique"
msgstr "מרטיניק"

#: lang.pm:324
#, c-format
msgid "Mauritania"
msgstr "מאוריטניה"

#: lang.pm:325
#, c-format
msgid "Montserrat"
msgstr "מונסראט"

#: lang.pm:326
#, c-format
msgid "Malta"
msgstr "מלטה"

#: lang.pm:327
#, c-format
msgid "Mauritius"
msgstr "מאוריציוס"

#: lang.pm:328
#, c-format
msgid "Maldives"
msgstr "האיים המלדיביים"

#: lang.pm:329
#, c-format
msgid "Malawi"
msgstr "מלאווי"

#: lang.pm:330
#, c-format
msgid "Mexico"
msgstr "מקסיקו"

#: lang.pm:331
#, c-format
msgid "Malaysia"
msgstr "מלזיה"

#: lang.pm:332
#, c-format
msgid "Mozambique"
msgstr "מוזמביק"

#: lang.pm:333
#, c-format
msgid "Namibia"
msgstr "נמיביה"

#: lang.pm:334
#, c-format
msgid "New Caledonia"
msgstr "קלדוניה החדשה"

#: lang.pm:335
#, c-format
msgid "Niger"
msgstr "ניגר"

#: lang.pm:336
#, c-format
msgid "Norfolk Island"
msgstr "אי נורפולק"

#: lang.pm:337
#, c-format
msgid "Nigeria"
msgstr "ניגריה"

#: lang.pm:338
#, c-format
msgid "Nicaragua"
msgstr "ניקאראגואה"

#: lang.pm:341
#, c-format
msgid "Nepal"
msgstr "נפאל"

#: lang.pm:342
#, c-format
msgid "Nauru"
msgstr "נאורו"

#: lang.pm:343
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:344
#, c-format
msgid "New Zealand"
msgstr "ניו-זילנד"

#: lang.pm:345
#, c-format
msgid "Oman"
msgstr "עומן"

#: lang.pm:346
#, c-format
msgid "Panama"
msgstr "פנמה"

#: lang.pm:347
#, c-format
msgid "Peru"
msgstr "פרו"

#: lang.pm:348
#, c-format
msgid "French Polynesia"
msgstr "פולינזיה הצָרְפָתִית"

#: lang.pm:349
#, c-format
msgid "Papua New Guinea"
msgstr "פאפואה-גינאה החדשה"

#: lang.pm:350
#, c-format
msgid "Philippines"
msgstr "הפיליפינים"

#: lang.pm:351
#, c-format
msgid "Pakistan"
msgstr "פקיסטן"

#: lang.pm:352 network/adsl_consts.pm:503
#, c-format
msgid "Poland"
msgstr "פולין"

#: lang.pm:353
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "סנט פייר ומיקואלון"

#: lang.pm:354
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:355
#, c-format
msgid "Puerto Rico"
msgstr "פוארטו-ריקו"

#: lang.pm:356
#, c-format
msgid "Palestine"
msgstr "הרשות הפלסטינית"

#: lang.pm:357 network/adsl_consts.pm:513
#, c-format
msgid "Portugal"
msgstr "פורטוגל"

#: lang.pm:358
#, c-format
msgid "Paraguay"
msgstr "פרגוואי"

#: lang.pm:359
#, c-format
msgid "Palau"
msgstr "פאולו"

#: lang.pm:360
#, c-format
msgid "Qatar"
msgstr "קטאר"

#: lang.pm:361
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:362
#, c-format
msgid "Romania"
msgstr "רומניה"

#: lang.pm:363
#, c-format
msgid "Russia"
msgstr "רוסיה"

#: lang.pm:364
#, c-format
msgid "Rwanda"
msgstr "רואנדה"

#: lang.pm:365
#, c-format
msgid "Saudi Arabia"
msgstr "ערב הסעודית"

#: lang.pm:366
#, c-format
msgid "Solomon Islands"
msgstr "איי שלמה"

#: lang.pm:367
#, c-format
msgid "Seychelles"
msgstr "איי סיישל"

#: lang.pm:368
#, c-format
msgid "Sudan"
msgstr "סודן"

#: lang.pm:370
#, c-format
msgid "Singapore"
msgstr "סינגפור"

#: lang.pm:371
#, c-format
msgid "Saint Helena"
msgstr "סנט הלנה"

#: lang.pm:372 network/adsl_consts.pm:520
#, c-format
msgid "Slovenia"
msgstr "סלובניה"

#: lang.pm:373
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "איי Svalbard ואיי Jan Mayen"

#: lang.pm:374
#, c-format
msgid "Slovakia"
msgstr "סלובקיה"

#: lang.pm:375
#, c-format
msgid "Sierra Leone"
msgstr "סיירה ליאונה"

#: lang.pm:376
#, c-format
msgid "San Marino"
msgstr "סאן-מארינו"

#: lang.pm:377
#, c-format
msgid "Senegal"
msgstr "סנגל"

#: lang.pm:378
#, c-format
msgid "Somalia"
msgstr "סומליה"

#: lang.pm:379
#, c-format
msgid "Suriname"
msgstr "סורינאם"

#: lang.pm:380
#, c-format
msgid "Sao Tome and Principe"
msgstr "סאו תומה ופרינסיפה"

#: lang.pm:381
#, c-format
msgid "El Salvador"
msgstr "אל סלבדור"

#: lang.pm:382
#, c-format
msgid "Syria"
msgstr "סורינאם"

#: lang.pm:383
#, c-format
msgid "Swaziland"
msgstr "סווזילנד"

#: lang.pm:384
#, c-format
msgid "Turks and Caicos Islands"
msgstr "איי קייקוס"

#: lang.pm:385
#, c-format
msgid "Chad"
msgstr "צ'אד"

#: lang.pm:386
#, c-format
msgid "French Southern Territories"
msgstr "הטריטוריה הצרפתיתי הדרומית"

#: lang.pm:387
#, c-format
msgid "Togo"
msgstr "טוגו"

#: lang.pm:388 network/adsl_consts.pm:585
#, c-format
msgid "Thailand"
msgstr "תאילנד"

#: lang.pm:389
#, c-format
msgid "Tajikistan"
msgstr "טאנג'יקיסטן"

#: lang.pm:390
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:391
#, c-format
msgid "East Timor"
msgstr "מזרח טימור"

#: lang.pm:392
#, c-format
msgid "Turkmenistan"
msgstr "טורקמניסטאן"

#: lang.pm:393
#, c-format
msgid "Tunisia"
msgstr "טוניסיה"

#: lang.pm:394
#, c-format
msgid "Tonga"
msgstr "טונגה"

#: lang.pm:395
#, c-format
msgid "Turkey"
msgstr "טורקיה"

#: lang.pm:396
#, c-format
msgid "Trinidad and Tobago"
msgstr "טרינידד וטובגו"

#: lang.pm:397
#, c-format
msgid "Tuvalu"
msgstr "טובאלו"

#: lang.pm:398
#, c-format
msgid "Taiwan"
msgstr "טאיוואן"

#: lang.pm:399
#, c-format
msgid "Tanzania"
msgstr "טנזניה"

#: lang.pm:400
#, c-format
msgid "Ukraine"
msgstr "אוקראינה"

#: lang.pm:401
#, c-format
msgid "Uganda"
msgstr "אוגנדה"

#: lang.pm:402
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "איי Minor Outlying של אר\"הב"

#: lang.pm:404
#, c-format
msgid "Uruguay"
msgstr "אורוגוואי"

#: lang.pm:405
#, c-format
msgid "Uzbekistan"
msgstr "אוזבקיסטן"

#: lang.pm:406
#, c-format
msgid "Vatican"
msgstr "ותיקן"

#: lang.pm:407
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "סנט וינסנט והגרנידים"

#: lang.pm:408
#, c-format
msgid "Venezuela"
msgstr "ונצואלה"

#: lang.pm:409
#, c-format
msgid "Virgin Islands (British)"
msgstr "איי הבתולה הבריטיים"

#: lang.pm:410
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "איי הבתולה האמקריים (ארה\"ב)"

#: lang.pm:411
#, c-format
msgid "Vietnam"
msgstr "וייטנאם"

#: lang.pm:412
#, c-format
msgid "Vanuatu"
msgstr "ונואטו"

#: lang.pm:413
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:414
#, c-format
msgid "Samoa"
msgstr "סמואה"

#: lang.pm:415
#, c-format
msgid "Yemen"
msgstr "תימן"

#: lang.pm:416
#, c-format
msgid "Mayotte"
msgstr "מאיוט"

#: lang.pm:417 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "דרום אפריקה"

#: lang.pm:418
#, c-format
msgid "Zambia"
msgstr "זמביה"

#: lang.pm:419
#, c-format
msgid "Zimbabwe"
msgstr "זימבבואה"

#: lang.pm:1047
#, c-format
msgid "You should install the following packages: %s"
msgstr "עליך להתקין את החבילות הבאות: %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: lang.pm:1050 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: lang.pm:1101
#, c-format
msgid "Welcome to %s"
msgstr "ברוכים הבאים ל- %s"

#: loopback.pm:31
#, c-format
msgid "Circular mounts %s\n"
msgstr ""

#: lvm.pm:116
#, c-format
msgid "Remove the logical volumes first\n"
msgstr ""

#: modules/interactive.pm:21 standalone/drakconnect:1033
#, c-format
msgid "Parameters"
msgstr "פרמטרים"

#: modules/interactive.pm:21 standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "כלום"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "הגדרות מודולים"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "באפשרותך להגדיר כל פרמטר מהמודול כאן."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "מצא %s ממשקים"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "האם יש לך עוד אחד?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "האם יש לך ממשקי %s כלשהם?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "עיון במידע אודות החומרה"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:87
#, c-format
msgid "Installing driver for %s card %s"
msgstr "מתקין מנהל התקן %s עבור כרטיס %s "

#: modules/interactive.pm:87
#, c-format
msgid "(module %s)"
msgstr "(מודול %s)"

#: modules/interactive.pm:98
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:104
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"באפשרותך עכשיו לספק אפשרויות למודול %s\n"
"אפשרויות הן בפורמט: \"name=value name2=value2 ...\".\n"
"לדוגמה: \"io=0x300 irq=7\""

#: modules/interactive.pm:106
#, c-format
msgid "Module options:"
msgstr "אפשרויות מודול:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:119
#, c-format
msgid "Which %s driver should I try?"
msgstr "איזה מנהל התקן %s אני צריך לנסות?"

#: modules/interactive.pm:128
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""

#: modules/interactive.pm:132
#, c-format
msgid "Autoprobe"
msgstr "חיפוש אוטומטי"

#: modules/interactive.pm:132
#, c-format
msgid "Specify options"
msgstr "יש לציין אפשרויות"

#: modules/interactive.pm:144
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"טעינת המודול %s נכשלה.\n"
"האם ברצונך לנסות שוב עם פרמטרים אחרים?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "מספר"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "מספרים מופרדים על ידי פסיקים"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "מחרוזות מופרדת עם פסיקים"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "עכבר - Sun"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "רגיל"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "עכבר PS2 כללי עם גלגלת"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:57 network/modem.pm:58 network/modem.pm:59
#: network/modem.pm:84 network/modem.pm:98 network/modem.pm:103
#: network/modem.pm:136 network/netconnect.pm:607 network/netconnect.pm:612
#: network/netconnect.pm:624 network/netconnect.pm:629
#: network/netconnect.pm:645 network/netconnect.pm:647
#, c-format
msgid "Automatic"
msgstr "אוטומטי"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "העכבר החושב של Kensington"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "כפתור אחד"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "עכבר כללי עם 2 מקשים"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "עכבר כללי עם שלוש כפתורים והדמיית גלגלת"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "עם גלגלת"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "טורי"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "עכבר כללי עם 3 מקשים"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan עם הדמיית גלגלת"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series עם הדמיית גלגלת"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "עכבר Logitech (טורי, מסוג C7 ישן)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "עכבר Logitech (טורי, מסוג C7 ישן), עם הדמיה של גלגלת"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "עכבר Thinking Mouse של Kensington עם הדמיית גלגלת"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 כפתורים"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 כפתורים"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "שלושה כפתורים עם הדמיית גלגלת"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "אוניברסלי"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:89 mouse.pm:359 mouse.pm:368 mouse.pm:420
#, c-format
msgid "Synaptics Touchpad"
msgstr "לוח מגע Synaptics"

#: mouse.pm:93 standalone/drakconnect:358 standalone/drakvpn:1140
#, c-format
msgid "none"
msgstr "כלום"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "ללא עכבר"

#: mouse.pm:546
#, c-format
msgid "Please test the mouse"
msgstr "בדיקת הגדרות העכבר"

#: mouse.pm:548
#, c-format
msgid "To activate the mouse,"
msgstr "יש לבדוק את תנועת העכבר,"

#: mouse.pm:549
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "וכן את הלחצנים והגלגלת (אם ישנה)."

#: network/adsl.pm:19
#, c-format
msgid "use PPPoE"
msgstr "שימוש ב-PPPOE"

#: network/adsl.pm:20
#, c-format
msgid "use PPTP"
msgstr "שימוש ב-PPTP"

#: network/adsl.pm:21
#, c-format
msgid "use DHCP"
msgstr "שימוש ב-DHCP"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel Speedtouch USB"
msgstr "Alcatel speedtouch USB"

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, c-format
msgid " - detected"
msgstr "- זוהה"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using PPPoA) USB"
msgstr "Sagem (שימוש ב DHCP) usb"

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using DHCP) USB"
msgstr "Sagem (שימוש ב DHCP) usb"

#: network/adsl.pm:35 network/netconnect.pm:799
#, c-format
msgid "Connect to the Internet"
msgstr "חיבור לאינטרנט"

#: network/adsl.pm:36 network/netconnect.pm:800
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use PPTP, a few use DHCP.\n"
"If you don't know, choose 'use PPPoE'"
msgstr ""
"שיטת החיבור הנפוצה ברשת ADSL היא pppoe. במקרים\n"
"מסויימים משתמשים ב PPTP, במקרים אחרים משתמשים\n"
"ב DHCP. ספק האינטרנט שלך יוכל לעזור בבחירת השיטה."

#: network/adsl.pm:41 network/netconnect.pm:804
#, c-format
msgid "ADSL connection type:"
msgstr "סוגי חיבור ADSL :"

#: network/drakfirewall.pm:12 share/compssUsers.pl:84
#, c-format
msgid "Web Server"
msgstr "שרת איחסון אתרים"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "שרת שמות מתחם"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "שרת SSH"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "שרת FTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "שרת דוא\"ל"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "שרת POP ו-IMAP"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "שרת Telnet"

#: network/drakfirewall.pm:48
#, c-format
msgid "Samba server"
msgstr "שרת Samba"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "שרת CUPS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "בדיקת הידהוד (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "ביטורנט"

#: network/drakfirewall.pm:131
#, c-format
msgid "No network card"
msgstr "אין כרטיס רשת"

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:175
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "לאיזה שרותים ברצונך לאפשר חיבור מהאינטרנט?"

#: network/drakfirewall.pm:176
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"יש באפשרותך להגדיר יציאות (פורטים) כלשהם.\n"
"לדוגמא: tcp/139 או udp/139. למידע נוסף\n"
"יש לעיין בקובץ /etc/services."

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:192
#, c-format
msgid "Everything (no firewall)"
msgstr "הכל (ללא חומת אש)"

#: network/drakfirewall.pm:194
#, c-format
msgid "Other ports"
msgstr "יציאות אחרות"

#: network/isdn.pm:125 network/netconnect.pm:456 network/netconnect.pm:564
#: network/netconnect.pm:567
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:168 network/netconnect.pm:388
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:168 network/netconnect.pm:388
#, c-format
msgid "I don't know"
msgstr "לא ידוע"

#: network/isdn.pm:169 network/netconnect.pm:388
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:170 network/netconnect.pm:388
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:57 network/modem.pm:58 network/modem.pm:59
#: network/netconnect.pm:612 network/netconnect.pm:629
#: network/netconnect.pm:645
#, c-format
msgid "Manual"
msgstr "ידני"

#: network/netconnect.pm:89 network/netconnect.pm:485
#: network/netconnect.pm:489
#, c-format
msgid "Manual choice"
msgstr "בחירה ידנית"

#: network/netconnect.pm:89
#, c-format
msgid "Internal ISDN card"
msgstr "מודם ISDN פנימי"

#: network/netconnect.pm:98
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:99
#, c-format
msgid "Managed"
msgstr "מנוהל"

#: network/netconnect.pm:100
#, c-format
msgid "Master"
msgstr "ראשי"

#: network/netconnect.pm:101
#, c-format
msgid "Repeater"
msgstr "משחזר"

#: network/netconnect.pm:102
#, c-format
msgid "Secondary"
msgstr "משני"

#: network/netconnect.pm:103
#, c-format
msgid "Auto"
msgstr "אוטומטי"

#: network/netconnect.pm:106 printer/printerdrake.pm:1248
#: standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "הגדרה ידנית"

#: network/netconnect.pm:107
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "כתובת IP אוטומטית (BOOTP/DHCP)"

#: network/netconnect.pm:109
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "כתובת IP אוטומטית (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:112
#, c-format
msgid "Protocol for the rest of the world"
msgstr "פרוטוקול לשאר העולם"

#: network/netconnect.pm:114 standalone/drakconnect:539
#, c-format
msgid "European protocol (EDSS1)"
msgstr "פרוטוקול אירופאי (EDSS1)"

#: network/netconnect.pm:115 standalone/drakconnect:540
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""

#: network/netconnect.pm:151
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "מודם Alcatel speedtouch USB"

#: network/netconnect.pm:152
#, c-format
msgid "Sagem USB modem"
msgstr "מודם Sagem USB"

#: network/netconnect.pm:153
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:154
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:158
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "פרוטוקול הגדרת מארח באופן דינמי (DHCP)"

#: network/netconnect.pm:159
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "הגדרה ידנית של TCP/IP"

#: network/netconnect.pm:160
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "פרוטוקול ערוץ נקודה לנקודה (PPTP)"

#: network/netconnect.pm:161
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP מעל תשתית Ethernet (PPPoE)"

#: network/netconnect.pm:162
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP מעל תשתית ATM (PPPoA)"

#: network/netconnect.pm:163
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:167
#, c-format
msgid "Bridged Ethernet LLC"
msgstr "Bridged Ethernet LLC"

#: network/netconnect.pm:168
#, c-format
msgid "Bridged Ethernet VC"
msgstr "Bridged Ethernet VC"

#: network/netconnect.pm:169
#, c-format
msgid "Routed IP LLC"
msgstr "Routed IP LLC"

#: network/netconnect.pm:170
#, c-format
msgid "Routed IP VC"
msgstr "Routed IP VC"

#: network/netconnect.pm:171
#, c-format
msgid "PPPoA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:172
#, c-format
msgid "PPPoA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:176 standalone/drakconnect:474
#, c-format
msgid "Script-based"
msgstr "מבוסס תסריט (סקריפט)"

#: network/netconnect.pm:177 standalone/drakconnect:474
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:178 standalone/drakconnect:474
#, c-format
msgid "Terminal-based"
msgstr "מבוסס-מסוף"

#: network/netconnect.pm:179 standalone/drakconnect:474
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:180 standalone/drakconnect:474
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:236 standalone/drakconnect:59
#, c-format
msgid "Network & Internet Configuration"
msgstr "הגדרת הרשת ואינטרנט"

#: network/netconnect.pm:242
#, c-format
msgid "(detected on port %s)"
msgstr "(זוהה בשער %s)"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:244
#, c-format
msgid "(detected %s)"
msgstr "(זוהה %s)"

#: network/netconnect.pm:244
#, c-format
msgid "(detected)"
msgstr "(זוהה)"

#: network/netconnect.pm:246
#, c-format
msgid "Modem connection"
msgstr "חיבור מודם"

#: network/netconnect.pm:247
#, c-format
msgid "ISDN connection"
msgstr "חיבור ISDN"

#: network/netconnect.pm:248
#, c-format
msgid "ADSL connection"
msgstr "חיבור ADSL"

#: network/netconnect.pm:249
#, c-format
msgid "Cable connection"
msgstr "חיבור כבלים"

#: network/netconnect.pm:250
#, c-format
msgid "LAN connection"
msgstr "חיבור רשת פנימית"

#: network/netconnect.pm:251 network/netconnect.pm:265
#, c-format
msgid "Wireless connection"
msgstr "חיבור אלחוטי"

#: network/netconnect.pm:261
#, c-format
msgid "Choose the connection you want to configure"
msgstr "עליך לבחור את החיבור שברצונך לערוך"

#: network/netconnect.pm:279
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"אנו עומדים להגדיר את חיבור ה-%s.\n"
"\n"
"\n"
"יש ללחוץ על \"%s\" בכדי להמשיך."

#: network/netconnect.pm:287 network/netconnect.pm:839
#, c-format
msgid "Connection Configuration"
msgstr "הגדרת חיבור"

#: network/netconnect.pm:288 network/netconnect.pm:840
#, c-format
msgid "Please fill or check the field below"
msgstr "נא למלא או לבדוק את הערכים בטופס הבא:"

#: network/netconnect.pm:295 standalone/drakconnect:530
#, c-format
msgid "Card IRQ"
msgstr ""

#: network/netconnect.pm:296 standalone/drakconnect:531
#, c-format
msgid "Card mem (DMA)"
msgstr "כרטיס זכרון (DMA)"

#: network/netconnect.pm:297 standalone/drakconnect:532
#, c-format
msgid "Card IO"
msgstr "קלט פלט של הכרטיס"

#: network/netconnect.pm:298 standalone/drakconnect:533
#, c-format
msgid "Card IO_0"
msgstr ""

#: network/netconnect.pm:299
#, c-format
msgid "Card IO_1"
msgstr ""

#: network/netconnect.pm:300
#, c-format
msgid "Your personal phone number"
msgstr "מספר הטלפון הפרטי שלך"

#: network/netconnect.pm:301 network/netconnect.pm:843
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "שם הספק (לדוגמה provider.net)"

#: network/netconnect.pm:302 standalone/drakconnect:469
#, c-format
msgid "Provider phone number"
msgstr "מספר הטלפון של הספק"

#: network/netconnect.pm:303
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr "שרת DNS ראשון של ספק השירות (לא חובה)"

#: network/netconnect.pm:304
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr "שרת DNS משני של ספק השירות (לא חובה)"

#: network/netconnect.pm:305 standalone/drakconnect:420
#, c-format
msgid "Dialing mode"
msgstr "שיטת חיוג"

#: network/netconnect.pm:306 standalone/drakconnect:425
#: standalone/drakconnect:493
#, c-format
msgid "Connection speed"
msgstr "מהירות חיבור"

#: network/netconnect.pm:307 standalone/drakconnect:430
#, c-format
msgid "Connection timeout (in sec)"
msgstr ""

#: network/netconnect.pm:310 network/netconnect.pm:846
#: standalone/drakconnect:467
#, c-format
msgid "Account Login (user name)"
msgstr "שם משתמש (כניסה לחשבון)"

#: network/netconnect.pm:311 network/netconnect.pm:847
#: standalone/drakconnect:468
#, c-format
msgid "Account Password"
msgstr "סיסמת חשבון"

#: network/netconnect.pm:328 network/netconnect.pm:677
#: network/netconnect.pm:880
#, c-format
msgid "Select the network interface to configure:"
msgstr "עליך לבחור את ממשק הרשת שברצונך להגדיר:"

#: network/netconnect.pm:330 network/netconnect.pm:378
#: network/netconnect.pm:678 network/netconnect.pm:882 network/shorewall.pm:85
#: standalone/drakconnect:683 standalone/drakgw:227 standalone/drakvpn:221
#, c-format
msgid "Net Device"
msgstr "התקן רשת"

#: network/netconnect.pm:331 network/netconnect.pm:339
#, c-format
msgid "External ISDN modem"
msgstr "מודם ISDN חיצוני"

#: network/netconnect.pm:377 standalone/harddrake2:192
#, c-format
msgid "Select a device!"
msgstr "יש לבחור התקן!"

#: network/netconnect.pm:386 network/netconnect.pm:396
#: network/netconnect.pm:406 network/netconnect.pm:439
#: network/netconnect.pm:453
#, c-format
msgid "ISDN Configuration"
msgstr "הגדרת ISDN"

#: network/netconnect.pm:387
#, c-format
msgid "What kind of card do you have?"
msgstr "איזה סוג כרטיס יש לך?"

#: network/netconnect.pm:397
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"אם יש לך כרטיס ISA הערכים  במסך הבא אמורים להיות נכונים \n"
"אם יש לך כרטיס מסוג  PCMCIA אתה צריך לציין את ה \"irq\" ו \"io\" של הכרטיס \n"

#: network/netconnect.pm:401
#, c-format
msgid "Continue"
msgstr "המשך"

#: network/netconnect.pm:401
#, c-format
msgid "Abort"
msgstr "ביטול"

#: network/netconnect.pm:407
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr ""

#: network/netconnect.pm:425
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:427 standalone/drakconnect:116 standalone/drakups:247
#: standalone/harddrake2:117
#, c-format
msgid "Driver"
msgstr "מנהל התקן"

#: network/netconnect.pm:439
#, c-format
msgid "Which protocol do you want to use?"
msgstr "באיזה פרוטוקול ברצונך להשתמש?"

#: network/netconnect.pm:441 standalone/drakconnect:116
#: standalone/drakconnect:309 standalone/drakconnect:538
#: standalone/drakvpn:1142
#, c-format
msgid "Protocol"
msgstr "פרוטוקול"

#: network/netconnect.pm:453
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"עליך לבחור את ספק החומרה שלך. אם הספק\n"
"לא מופיע ברשימה עליך לבחור \"לא ברשימה\"."

#: network/netconnect.pm:455 network/netconnect.pm:563
#: network/netconnect.pm:719
#, c-format
msgid "Provider:"
msgstr "ספק שרות:"

#: network/netconnect.pm:470
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"המערכת אינה כוללת מנהל התקן מתאים למודם שלך. יש\n"
"לבקר באתר http://www.linmodems.org למידע נוסף."

#: network/netconnect.pm:482
#, c-format
msgid "Select the modem to configure:"
msgstr "עליך לבחור את המודם שברצונך להגדיר:"

#: network/netconnect.pm:530
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr ""

#: network/netconnect.pm:561
#, c-format
msgid "Select your provider:"
msgstr "עליך לבחור את הספק שלך:"

#: network/netconnect.pm:589
#, c-format
msgid "Dialup: account options"
msgstr "חיוג: הגדרות חשבון"

#: network/netconnect.pm:592
#, c-format
msgid "Connection name"
msgstr "שם התחברות"

#: network/netconnect.pm:593
#, c-format
msgid "Phone number"
msgstr "מספר טלפון"

#: network/netconnect.pm:594
#, c-format
msgid "Login ID"
msgstr "שם משתמש"

#: network/netconnect.pm:609 network/netconnect.pm:642
#, c-format
msgid "Dialup: IP parameters"
msgstr "חיוג: נתוני IP"

#: network/netconnect.pm:612
#, c-format
msgid "IP parameters"
msgstr "מאפייני IP"

#: network/netconnect.pm:613 network/netconnect.pm:976
#: printer/printerdrake.pm:454 standalone/drakconnect:116
#: standalone/drakconnect:323 standalone/drakconnect:880
#: standalone/drakups:282
#, c-format
msgid "IP address"
msgstr "כתובת IP"

#: network/netconnect.pm:614
#, c-format
msgid "Subnet mask"
msgstr "מסיכת Subnet"

#: network/netconnect.pm:626
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:629
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:630
#, c-format
msgid "Domain name"
msgstr "שם מתחם"

#: network/netconnect.pm:631 network/netconnect.pm:844
#: standalone/drakconnect:998
#, c-format
msgid "First DNS Server (optional)"
msgstr "שרת DNS ראשון (לא חובה)"

#: network/netconnect.pm:632 network/netconnect.pm:845
#: standalone/drakconnect:999
#, c-format
msgid "Second DNS Server (optional)"
msgstr "שרת DNS שני (לא חובה)"

#: network/netconnect.pm:633
#, c-format
msgid "Set hostname from IP"
msgstr "הגדרת שם מארח עפ\"י כתובת IP"

#: network/netconnect.pm:645 standalone/drakconnect:334
#, c-format
msgid "Gateway"
msgstr ""

#: network/netconnect.pm:646
#, c-format
msgid "Gateway IP address"
msgstr "כתובת IP של השער"

#: network/netconnect.pm:677
#, c-format
msgid "ADSL configuration"
msgstr "הגדרת ADSL"

#: network/netconnect.pm:717
#, c-format
msgid "Please choose your ADSL provider"
msgstr "עליך לבחור את ספק ה ADSL שלך"

#: network/netconnect.pm:735
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/netconnect.pm:739 network/netconnect.pm:744
#, c-format
msgid "Use a floppy"
msgstr "שימוש בתקליטון"

#: network/netconnect.pm:739 network/netconnect.pm:748
#, c-format
msgid "Use my Windows partition"
msgstr "השתמש במחיצת החלונות שלי"

#: network/netconnect.pm:739 network/netconnect.pm:751
#, c-format
msgid "Do it later"
msgstr "עשה את זה מאוחר יותר"

#: network/netconnect.pm:758
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/netconnect.pm:765
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/netconnect.pm:780
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"נא להוריד את המיקרו-קוד של Alcatel.\n"
"מהאתר:%s\n"
"ולהעתיק הקובץ mgmt.o לתיקייה /usr/share/speedtouch"

#: network/netconnect.pm:849
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr "זיהוי נתיב וירטואלי (VPI):"

#: network/netconnect.pm:850
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr "זיהוי מעגל וירטואלי (VCI):"

#: network/netconnect.pm:853
#, c-format
msgid "Encapsulation:"
msgstr "מעטפת (Encapsulation):"

#: network/netconnect.pm:870
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:882
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:898
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Modifying the fields below will override this configuration.\n"
"Do you really want to reconfigure this device?"
msgstr ""

#: network/netconnect.pm:912 network/netconnect.pm:1340
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"ברכותינו! הגדרת הרשת והאינטרנט הסתיימה.\n"
"\n"

#: network/netconnect.pm:929
#, c-format
msgid "Zeroconf hostname resolution"
msgstr "פענוח שם מארח Zeroconf"

#: network/netconnect.pm:930 network/netconnect.pm:963
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "הגדרת התקן רשת %s (מנהל התקן %s)"

#: network/netconnect.pm:931
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""
"יש אפשרות להגדיר את חיבור הרשת בעזרת\n"
"אחד הפרוטוקולים הבאים. עליך לבחור את\n"
"הפרוטוקול שבו ברצונך להשתמש:"

#: network/netconnect.pm:964
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"יש לקבוע את כתובת ה-IP של המחשב.\n"
"כל נתון אמור להיות בעל 4 שדות מופרדים\n"
"בנקודות, לדוגמה 1.2.3.4"

#: network/netconnect.pm:971
#, c-format
msgid "Assign host name from DHCP address"
msgstr ""

#: network/netconnect.pm:972
#, c-format
msgid "DHCP host name"
msgstr "שם מארח DHCP"

#: network/netconnect.pm:977 standalone/drakconnect:328
#: standalone/drakconnect:881 standalone/drakgw:323
#, c-format
msgid "Netmask"
msgstr "מיסוך רשת"

#: network/netconnect.pm:979 standalone/drakconnect:413
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "מעקב אחר זיהוי  כרטיס הרשת (שימושי במחשבים ניידים)"

#: network/netconnect.pm:980 standalone/drakconnect:414
#, c-format
msgid "Network Hotplugging"
msgstr "חיבור \"חם\" לרשת"

#: network/netconnect.pm:982 standalone/drakconnect:408
#, c-format
msgid "Start at boot"
msgstr "חיבור באתחול המערכת"

#: network/netconnect.pm:985 standalone/drakconnect:884
#, c-format
msgid "DHCP client"
msgstr "לקוח DHCP"

#: network/netconnect.pm:995 printer/printerdrake.pm:1498
#: standalone/drakconnect:648
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "כתובת IP צריכה להראות ככה 1.2.3.4"

#: network/netconnect.pm:999
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:1004 standalone/drakTermServ:1690
#: standalone/drakTermServ:1691 standalone/drakTermServ:1692
#, c-format
msgid "%s already in use\n"
msgstr "%s כבר בשימוש \n"

#: network/netconnect.pm:1030 network/netconnect.pm:1059
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr ""

#: network/netconnect.pm:1033 standalone/drakconnect:380
#, c-format
msgid "Operating Mode"
msgstr "אופן פעולה"

#: network/netconnect.pm:1035 standalone/drakconnect:381
#, c-format
msgid "Network name (ESSID)"
msgstr "שם הרשת (ESSID)"

#: network/netconnect.pm:1036 standalone/drakconnect:382
#, c-format
msgid "Network ID"
msgstr "זיהוי רשת"

#: network/netconnect.pm:1037 standalone/drakconnect:383
#, c-format
msgid "Operating frequency"
msgstr "תדירות פעולה"

#: network/netconnect.pm:1038 standalone/drakconnect:384
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1039 standalone/drakconnect:385
#, c-format
msgid "Bitrate (in b/s)"
msgstr "קצב סיביות - סל\"ש"

#: network/netconnect.pm:1045
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1049
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1062 standalone/drakconnect:396
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:1063
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1070 standalone/drakconnect:397
#, c-format
msgid "Fragmentation"
msgstr "פיצוליות"

#: network/netconnect.pm:1071 standalone/drakconnect:398
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1072
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1079 standalone/drakconnect:399
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1080
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1088 standalone/drakconnect:400
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1089
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1163
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"עליך להגדיר את שם המחשב שלך. שם המחשב\n"
"שלך צריך להיות שם המוגדר לפי הכללים, למשל\n"
"mybox.mylab.myco.co יש באפשרותך גם\n"
"להגדיר את כתובת ה-IP של השער אם יש לך אחד."

#: network/netconnect.pm:1167
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1169 standalone/drakconnect:997
#, c-format
msgid "Host name (optional)"
msgstr "שם מחשב (לא חובה)"

#: network/netconnect.pm:1169
#, c-format
msgid "Host name"
msgstr "שם מארח"

#: network/netconnect.pm:1171
#, c-format
msgid "DNS server 1"
msgstr "שרת DNS ראשון"

#: network/netconnect.pm:1172
#, c-format
msgid "DNS server 2"
msgstr "שרת DNS שני"

#: network/netconnect.pm:1173
#, c-format
msgid "DNS server 3"
msgstr "שרת DNS שלישי"

#: network/netconnect.pm:1174
#, c-format
msgid "Search domain"
msgstr "חיפוש מתחם"

#: network/netconnect.pm:1175
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1176
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "שער (למשל %s)"

#: network/netconnect.pm:1178
#, c-format
msgid "Gateway device"
msgstr "התקן שער"

#: network/netconnect.pm:1187
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr ""

#: network/netconnect.pm:1192 standalone/drakconnect:651
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr ""

#: network/netconnect.pm:1203
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1207
#, c-format
msgid "Zeroconf Host name"
msgstr ""

#: network/netconnect.pm:1210
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "שם מארח Zeroconf חייב שלא להכיל a ."

#: network/netconnect.pm:1220
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"הוגדרו מספר דרכים להתחבר לאינטרנט.\n"
"עליך לבחור את חיבור ברירת המחדל\n"
"\n"

#: network/netconnect.pm:1222
#, c-format
msgid "Internet connection"
msgstr "חיבור אינטרנט"

#: network/netconnect.pm:1230
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "הגדרת התצורה הסתיימה, האם להפעיל את ההגדרות?"

#: network/netconnect.pm:1240
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "האם ברצונך לבצע את ההתחברות בזמן האתחול?"

#: network/netconnect.pm:1258
#, c-format
msgid "Automatically at boot"
msgstr "אוטומטית באתחול המערכת"

#: network/netconnect.pm:1260
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1262
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1271
#, c-format
msgid "How do you want to dial this connection?"
msgstr "איך ברצונך לחייג לחיבור זה?"

#: network/netconnect.pm:1284
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "יש צורך לאתחל את הרשת. האם ברצונך לאתחל אותה עכשיו?"

#: network/netconnect.pm:1291 network/netconnect.pm:1356
#, c-format
msgid "Network Configuration"
msgstr "הגדרת הרשת"

#: network/netconnect.pm:1292
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"קרתה תקלה בעת ניסיון להפעיל מחדש את הרשת: \n"
"\n"
"%s"

#: network/netconnect.pm:1300
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "האם לנסות להתחבר לאינטרנט עכשיו?"

#: network/netconnect.pm:1308 standalone/drakconnect:1029
#, c-format
msgid "Testing your connection..."
msgstr "בודק את החיבור שלך..."

#: network/netconnect.pm:1324
#, c-format
msgid "The system is now connected to the Internet."
msgstr ""

#: network/netconnect.pm:1325
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr ""

#: network/netconnect.pm:1326
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"נראה שהמערכת אינה מחוברת לאינטרנט.\n"
"כדאי לנסות להגדיר מחדש את החיבור שלך."

#: network/netconnect.pm:1343
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"עם סיום פעולה זו, אנו ממליצים לך לאתחל את הסביבה הגרפית שלך בכדי למנוע בעיות "
"שקשורות לשם המארח."

#: network/netconnect.pm:1344
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""
"אירעו שגיאות בעת התצורה.\n"
"נא לבדוק את החיבור דרך net_monitor או mcc. אם החיבור לא עובד, יהיה צורך "
"להריץ את תצורה שוב."

#: network/netconnect.pm:1357
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: network/netconnect.pm:1393
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:316
#, c-format
msgid "Proxies configuration"
msgstr "הגדרות שרתים מתווכים"

#: network/network.pm:317
#, c-format
msgid "HTTP proxy"
msgstr "שרת מתווך ל HTTP"

#: network/network.pm:318
#, c-format
msgid "FTP proxy"
msgstr "שרת מתווך ל FTP"

#: network/network.pm:321
#, c-format
msgid "Proxy should be http://..."
msgstr "שם השרת המתווך צריך להתחיל עם http://..."

#: network/network.pm:322
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "הכתובת צריכה להתחיל עם 'ftp://' או 'http://'"

#: network/shorewall.pm:28
#, c-format
msgid "Firewalling configuration detected!"
msgstr "הגדרות חומת אש זוהו!"

#: network/shorewall.pm:29
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""

#: network/shorewall.pm:78 standalone/drakgw:220 standalone/drakvpn:214
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"עליך לספק את שם ממשק החיבור לאינטרנט.\n"
"\n"
"לדוגמה:\n"
"\t\tppp+ עבור חיבורי מודם או DSL, \n"
"\t\teth0, או eth1 עבור חיבור כבלים, \n"
"\t\tippp+ עבור חיבור ISDN.\n"

#: network/tools.pm:197
#, c-format
msgid "Insert floppy"
msgstr "נא להכניס תקליטון"

#: network/tools.pm:198
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"יש להכניס תקליטון מפורמט כ FAT לכונן %s, עם %s בספריית שורש וללחוץ על %s"

#: network/tools.pm:199
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "שגיאת בעת גישה אל התקליטון. לא יכול לעגן את ההתקן %s"

#: partition_table.pm:393
#, c-format
msgid "mount failed: "
msgstr "העיגון נכשל:"

#: partition_table.pm:498
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "מחיצה מורחבת לא נתמכת בפלטפורמה הזאת"

#: partition_table.pm:516
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"יש לך מקום פנוי בטבלת המחיצות שלך אך איני יכול להשתמש בו.\n"
"הפתרון היחידי הוא להזיז את המחיצה הראשית כדי למקם את השטח\n"
"הפנוי ליד המחיצות המורחבות."

#: partition_table.pm:602
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "שחזור מתוך קובץ %s נכשל: %s"

#: partition_table.pm:604
#, c-format
msgid "Bad backup file"
msgstr "קובץ גיבוי שגוי"

#: partition_table.pm:624
#, c-format
msgid "Error writing to file %s"
msgstr "שגיאה בכתיבה לקובץ %s"

#: partition_table/raw.pm:238
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""

#: pkgs.pm:23
#, c-format
msgid "must have"
msgstr "חייב להיות"

#: pkgs.pm:24
#, c-format
msgid "important"
msgstr "חשוב"

#: pkgs.pm:25
#, c-format
msgid "very nice"
msgstr "מומלץ מאוד"

#: pkgs.pm:26
#, c-format
msgid "nice"
msgstr "מומלץ"

#: pkgs.pm:27
#, c-format
msgid "maybe"
msgstr "לא הכרחי"

#: printer/cups.pm:103
#, c-format
msgid "(on %s)"
msgstr "(על %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr "(על המערכת הזו)"

#: printer/cups.pm:115 standalone/printerdrake:203
#, c-format
msgid "Configured on other machines"
msgstr "מוגדר במכונות אחרות"

#: printer/cups.pm:117
#, c-format
msgid "On CUPS server \"%s\""
msgstr "על שרת CUPS \"%s\""

#: printer/cups.pm:117 printer/printerdrake.pm:4290
#: printer/printerdrake.pm:4300 printer/printerdrake.pm:4445
#: printer/printerdrake.pm:4456 printer/printerdrake.pm:4651
#, c-format
msgid " (Default)"
msgstr "(ברירת מחדל)"

#: printer/data.pm:40
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - הדפס, אל תמתין"

#: printer/data.pm:41
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:53
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD -שירות הדפסת רשת"

#: printer/data.pm:54
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:76
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR הדור החדש של"

#: printer/data.pm:77
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:103
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - מערת הדפסה נפוצה של יוניקס"

#: printer/data.pm:132
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - מערכת הדפסה נפוצה של יוניקס (שרת מרוחק)"

#: printer/data.pm:133
#, c-format
msgid "Remote CUPS"
msgstr "שרת CUPS מרוחק"

#: printer/detect.pm:149 printer/detect.pm:227 printer/detect.pm:429
#: printer/detect.pm:466
#, c-format
msgid "Unknown Model"
msgstr "מודל לא ידוע"

#: printer/main.pm:27
#, c-format
msgid "Local printer"
msgstr "מדפסת מקומית"

#: printer/main.pm:28
#, c-format
msgid "Remote printer"
msgstr "מדפסת מרוחקת"

#: printer/main.pm:29
#, c-format
msgid "Printer on remote CUPS server"
msgstr "מדפסת על שרת cups מרוחק"

#: printer/main.pm:30 printer/printerdrake.pm:1521
#, c-format
msgid "Printer on remote lpd server"
msgstr "מדפסת על שרת lpd מרוחק"

#: printer/main.pm:31
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "מדפסת רשת (TCP/Socket)"

#: printer/main.pm:32
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "מדפסת על שרת SMB/Windows 95/98/NT"

#: printer/main.pm:33
#, c-format
msgid "Printer on NetWare server"
msgstr ""

#: printer/main.pm:34 printer/printerdrake.pm:1525
#, c-format
msgid "Enter a printer device URI"
msgstr "הכנס את כתובת של התקן הדפסה"

#: printer/main.pm:35
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:321 printer/main.pm:604 printer/main.pm:1635
#: printer/main.pm:2331 printer/main.pm:2340 printer/printerdrake.pm:874
#: printer/printerdrake.pm:1981 printer/printerdrake.pm:4688
#, c-format
msgid "Unknown model"
msgstr "דגם לא ידוע"

#: printer/main.pm:346 standalone/printerdrake:202
#, c-format
msgid "Configured on this machine"
msgstr "מוגדרות על מערכת זו"

#: printer/main.pm:352 printer/printerdrake.pm:1069
#, c-format
msgid " on parallel port #%s"
msgstr " על יציאה מקבילית #%s"

#: printer/main.pm:355 printer/printerdrake.pm:1072
#, c-format
msgid ", USB printer #%s"
msgstr ", מדפסת USB #%s"

#: printer/main.pm:357
#, c-format
msgid ", USB printer"
msgstr ", מדפסת USB"

#: printer/main.pm:362
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", התקן רב תכליתי על יציאה מקבילית #%s"

#: printer/main.pm:365
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", התקן רב תכליתי על יציאה מקבילית"

#: printer/main.pm:367
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:369
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", התקן רב-תכליתי על HP JetDirect"

#: printer/main.pm:371
#, c-format
msgid ", multi-function device"
msgstr ", התקן רב-תכליתי"

#: printer/main.pm:375
#, c-format
msgid ", printing to %s"
msgstr ", הדפסה אל %s"

#: printer/main.pm:378
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr "על שרת LPD - \"%s\" מדפסת \"%s\""

#: printer/main.pm:381
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", מארח TCP/IP \"%s\", פורט %s"

#: printer/main.pm:386
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "על שרת SMB/Windows \"%s\", שיתוף \"%s\""

#: printer/main.pm:391
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "על שרת נובל \"%s\", מדפסת \"%s\""

#: printer/main.pm:394
#, c-format
msgid ", using command %s"
msgstr ", שימוש בפקודה %s"

#: printer/main.pm:409
#, c-format
msgid "Parallel port #%s"
msgstr "על יציאה מקבילית #%s"

#: printer/main.pm:412 printer/printerdrake.pm:1090
#: printer/printerdrake.pm:1117 printer/printerdrake.pm:1135
#, c-format
msgid "USB printer #%s"
msgstr "מדפסת USB  #%s"

#: printer/main.pm:414
#, c-format
msgid "USB printer"
msgstr "מדפסת USB"

#: printer/main.pm:419
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "התקן רב תכליתי על יציאה מקבילית #%s"

#: printer/main.pm:422
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "התקן רב תכליתי על ממשק מקבילי"

#: printer/main.pm:424
#, c-format
msgid "Multi-function device on USB"
msgstr "התקן רב תכליתי על USB"

#: printer/main.pm:426
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "התקן רב תכליתי על HP JetDirect"

#: printer/main.pm:428
#, c-format
msgid "Multi-function device"
msgstr "התקן רב-תכליתי"

#: printer/main.pm:432
#, c-format
msgid "Prints into %s"
msgstr "הדפסה אל %s"

#: printer/main.pm:435
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "שרת LDP \"%s\", מדפסת \"%s\""

#: printer/main.pm:438
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ", מארח TCP/IP \"%s\", פורט %s"

#: printer/main.pm:443
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "על שרת SMB/Windows \"%s\", שיתוף \"%s\""

#: printer/main.pm:448
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "שרת נובל \"%s\", מדפסת \"%s\""

#: printer/main.pm:451
#, c-format
msgid "Uses command %s"
msgstr "שימוש בפקודה %s"

#: printer/main.pm:453
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:601 printer/printerdrake.pm:820
#: printer/printerdrake.pm:2584
#, c-format
msgid "Raw printer (No driver)"
msgstr "מדפסת כללית (ללא התקן)"

#: printer/main.pm:1147 printer/printerdrake.pm:205
#: printer/printerdrake.pm:217
#, c-format
msgid "Local network(s)"
msgstr "רשת/ות מקומיות"

#: printer/main.pm:1149 printer/printerdrake.pm:221
#, c-format
msgid "Interface \"%s\""
msgstr "ממשק \"%s\""

#: printer/main.pm:1151
#, c-format
msgid "Network %s"
msgstr "רשת %s"

#: printer/main.pm:1153
#, c-format
msgid "Host %s"
msgstr "מארח %s"

#: printer/main.pm:1182
#, c-format
msgid "%s (Port %s)"
msgstr "%s (יציאה %s)"

#: printer/printerdrake.pm:19
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:61
#, c-format
msgid "CUPS printer configuration"
msgstr "הגדרת מדפסת CUPS"

#: printer/printerdrake.pm:62
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"כאן באפשרותך לבחור אם הסורקים המחוברים למחשב זה יהיו זמינים למחשבים מרוחקים, "
"ולאילו מחשבים מרוחקים."

#: printer/printerdrake.pm:63
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"יש באפשרותך לקבוע האם מדפסות במכונות מרוחקות צריכות להיות זמינות אוטומטית "
"ממכונה זאת."

#: printer/printerdrake.pm:66
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "מדפסות המחוברות למכונה זו זמינות גם למחשבים אחרים"

#: printer/printerdrake.pm:71
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "מצא מדפסות זמינות המחוברות למכונות מרוחקות"

#: printer/printerdrake.pm:76
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "שיתוף מדפסות על מארחים/רשתות:"

#: printer/printerdrake.pm:78
#, c-format
msgid "Custom configuration"
msgstr "הגדרות מותאמות אישית"

#: printer/printerdrake.pm:83 standalone/scannerdrake:562
#: standalone/scannerdrake:579
#, c-format
msgid "No remote machines"
msgstr "אין מכונות מרוחקות"

#: printer/printerdrake.pm:94
#, c-format
msgid "Additional CUPS servers: "
msgstr "שרתי CUPS נוספים: "

#: printer/printerdrake.pm:101
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:109
#, c-format
msgid "Japanese text printing mode"
msgstr "מצב הדפסת טקסט יפני"

#: printer/printerdrake.pm:110
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"בחירה של אפשרות זו מאפשרת לך להדפיס טקסט פשוט בשפה היפנית. בחר באפשרות זו רק "
"אם אתה באמת רוצה להדפיס טקסט ביפנית, כאשר אפשרות זו מופעלת אין באפשרותך "
"להדפיס אותיות מוטעמות בגופנים לטיניים וכן לא יהיה באפשרותך להתאים את "
"השוליים, את גודל האות, וכו'. הגדרה זו משפיעה רק על מדפסות שמוגדרות במכונה "
"זו. אם ברצונך להדפיס טקסט בשפה היפנית על מדפסת שמוגדרת על מחשב מרוחק, עליך "
"להפעיל אפשרות זו על המחשב המרוחק. "

#: printer/printerdrake.pm:117
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "תיקון אוטומטי של תצורת CUPS"

#: printer/printerdrake.pm:119
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:132 printer/printerdrake.pm:500
#: printer/printerdrake.pm:3933
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:135
#, c-format
msgid "On"
msgstr "מודלק"

#: printer/printerdrake.pm:137 printer/printerdrake.pm:492
#: printer/printerdrake.pm:519
#, c-format
msgid "Off"
msgstr "כבוי"

#: printer/printerdrake.pm:138 printer/printerdrake.pm:501
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:155 printer/printerdrake.pm:230
#, c-format
msgid "Sharing of local printers"
msgstr ""

#: printer/printerdrake.pm:156
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:167
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:173
#, c-format
msgid "Edit selected host/network"
msgstr "ערוך מארח/רשת נבחר"

#: printer/printerdrake.pm:182
#, c-format
msgid "Remove selected host/network"
msgstr ""

#: printer/printerdrake.pm:213 printer/printerdrake.pm:223
#: printer/printerdrake.pm:235 printer/printerdrake.pm:242
#: printer/printerdrake.pm:273 printer/printerdrake.pm:291
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:231
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:238
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:246
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:247 printer/printerdrake.pm:423
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:271
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "המארח/הרשת כבר ברשימה, זה לא יכול להתוסף שוב.\n"

#: printer/printerdrake.pm:340 printer/printerdrake.pm:410
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "גישה למדפסת על שרת cups מרוחק"

#: printer/printerdrake.pm:341
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:352
#, c-format
msgid "Add server"
msgstr "הוספת שרת"

#: printer/printerdrake.pm:358
#, c-format
msgid "Edit selected server"
msgstr "עריכת השרת הנבחר"

#: printer/printerdrake.pm:367
#, c-format
msgid "Remove selected server"
msgstr "הסרת השרת הנבחר"

#: printer/printerdrake.pm:411
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:412
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:416
#, c-format
msgid "Server IP missing!"
msgstr "חסרה כתובת הIP של השרת!"

#: printer/printerdrake.pm:422
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "כתובת הIP אינה תקינה.\n"

#: printer/printerdrake.pm:434 printer/printerdrake.pm:1744
#, c-format
msgid "The port number should be an integer!"
msgstr ""

#: printer/printerdrake.pm:445
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "השרות כבר נימצא ברשימה ולכן אין אפשרות להוסיף אותו שנית.\n"

#: printer/printerdrake.pm:456 printer/printerdrake.pm:1765
#: standalone/drakups:247 standalone/harddrake2:47
#, c-format
msgid "Port"
msgstr ""

#: printer/printerdrake.pm:489 printer/printerdrake.pm:505
#: printer/printerdrake.pm:520 printer/printerdrake.pm:524
#: printer/printerdrake.pm:530
#, c-format
msgid "On, Name or IP of remote server:"
msgstr "פעיל, שם או כתובת IP של השרת המרוחק:"

#: printer/printerdrake.pm:508 printer/printerdrake.pm:3942
#: printer/printerdrake.pm:4007
#, c-format
msgid "CUPS server name or IP address missing."
msgstr "חסר שם שרת CUPS או כתובת IP."

#: printer/printerdrake.pm:560 printer/printerdrake.pm:580
#: printer/printerdrake.pm:649 printer/printerdrake.pm:714
#: printer/printerdrake.pm:741 printer/printerdrake.pm:796
#: printer/printerdrake.pm:838 printer/printerdrake.pm:848
#: printer/printerdrake.pm:1818 printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2021 printer/printerdrake.pm:2064
#: printer/printerdrake.pm:2104 printer/printerdrake.pm:2147
#: printer/printerdrake.pm:2184 printer/printerdrake.pm:2194
#: printer/printerdrake.pm:2437 printer/printerdrake.pm:2442
#: printer/printerdrake.pm:2579 printer/printerdrake.pm:2689
#: printer/printerdrake.pm:3247 printer/printerdrake.pm:3312
#: printer/printerdrake.pm:3361 printer/printerdrake.pm:3364
#: printer/printerdrake.pm:3484 printer/printerdrake.pm:3549
#: printer/printerdrake.pm:3621 printer/printerdrake.pm:3642
#: printer/printerdrake.pm:3651 printer/printerdrake.pm:3745
#: printer/printerdrake.pm:3837 printer/printerdrake.pm:3843
#: printer/printerdrake.pm:3863 printer/printerdrake.pm:3969
#: printer/printerdrake.pm:4076 printer/printerdrake.pm:4095
#: printer/printerdrake.pm:4104 printer/printerdrake.pm:4117
#: printer/printerdrake.pm:4313 printer/printerdrake.pm:4749
#: printer/printerdrake.pm:4826 standalone/printerdrake:64
#: standalone/printerdrake:84 standalone/printerdrake:566
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:561 printer/printerdrake.pm:3550
#: printer/printerdrake.pm:4077
#, c-format
msgid "Reading printer data..."
msgstr "קורא את מידע המדפסת..."

#: printer/printerdrake.pm:581
#, c-format
msgid "Restarting CUPS..."
msgstr ""

#: printer/printerdrake.pm:606
#, c-format
msgid "Select Printer Connection"
msgstr "בחירת חיבור מדפסת"

#: printer/printerdrake.pm:607
#, c-format
msgid "How is the printer connected?"
msgstr "איך המדפסת מחוברת?"

#: printer/printerdrake.pm:609
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"אין צורך להגדיר מדפסות על שרתי CUPS\n"
"מרוחקים; מדפסות אלו יזוהו באופן אוטומטי."

#: printer/printerdrake.pm:612 printer/printerdrake.pm:4315
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:619
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr "זיהוי מדפסת אוטומטי (מקומית, TCP/Socket, מדפסות SMB והתקן URI)"

#: printer/printerdrake.pm:649
#, c-format
msgid "Checking your system..."
msgstr ""

#: printer/printerdrake.pm:665
#, c-format
msgid "and one unknown printer"
msgstr "ומדפסת אחת לא ידועה"

#: printer/printerdrake.pm:667
#, c-format
msgid "and %d unknown printers"
msgstr ""

#: printer/printerdrake.pm:671
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"המדפסת הבאה\n"
"\n"
"%s%s\n"
"מחוברות ישירות למערכת שלך"

#: printer/printerdrake.pm:673
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"המדפסת הבאה\n"
"\n"
"%s%s\n"
"מחוברת ישירות למערכת שלך"

#: printer/printerdrake.pm:674
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"המדפסת הבאה\n"
"\n"
"%s%s\n"
"מחוברת ישירות למערכת שלך"

#: printer/printerdrake.pm:678
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"יש מדפסת אחת לא ידועה המחוברת למערכת שלך"

#: printer/printerdrake.pm:679
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"יש %d מדפסות לא ידועות המחוברות למערכת שלך"

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "לא נמצאה מדפסות המחוברות ישירות למחשבך"

#: printer/printerdrake.pm:685
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "(יש לוודא שכל המדפסות מחוברות ודולקות).\n"

#: printer/printerdrake.pm:698
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr "האם ברצונך לאפשר הדפסה במדפסות הרשת הפנימית או במדפסות המוזכרות כאן?\n"

#: printer/printerdrake.pm:699
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "האם ברצונך לאפשר הדפסה במדפסות הרשת הפנימית?\n"

#: printer/printerdrake.pm:701
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "האם ברצונך לאפשר הדפסה במדפסת המוזכרת כאן?\n"

#: printer/printerdrake.pm:702
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "האומנם ברצונך להגדיר הדפסה במחשב זו?\n"

#: printer/printerdrake.pm:703
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:742
#, c-format
msgid "Searching for new printers..."
msgstr "מחפש מדפסות חדשות..."

#: printer/printerdrake.pm:797
#, c-format
msgid "Found printer on %s..."
msgstr "נמצאה מדפסת על %s..."

#: printer/printerdrake.pm:822
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:823
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:824 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:829 printer/printerdrake.pm:2591
#, c-format
msgid "Printer model selection"
msgstr "בחירת דגם מדפסת"

#: printer/printerdrake.pm:830 printer/printerdrake.pm:2592
#, c-format
msgid "Which printer model do you have?"
msgstr "איזה דגם של מדפסת יש לך?"

#: printer/printerdrake.pm:831
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:834 printer/printerdrake.pm:2597
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"אם המדפסת שלך לא ברשימה, עליך לבחור מדפסת תואמת (יש לבדוק בחוברת ההוראות של "
"המדפסת) או דומה."

#: printer/printerdrake.pm:839
#, c-format
msgid "Configuring printer on %s..."
msgstr "מגדיר את המדפסת על \"%s\"..."

#: printer/printerdrake.pm:849 printer/printerdrake.pm:4096
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "מגדיר את המדפסת \"%s\"..."

#: printer/printerdrake.pm:932 printer/printerdrake.pm:944
#: printer/printerdrake.pm:1002 printer/printerdrake.pm:1987
#: printer/printerdrake.pm:4332 printer/printerdrake.pm:4501
#, c-format
msgid "Add a new printer"
msgstr "הוספת מדפסת חדשה"

#: printer/printerdrake.pm:933
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"ברוך בואך לאשף הגדרת המדפסת.\n"
"\n"
"אשף זה יאפשר לך להגדיר מדפסת מקומית או מדפסת רשת שבה ניתן להשתמש ממחשב זה "
"כמו גם ממחשבים אחרים ברשת.\n"
"\n"
"האשף ישאל מספר שאלות הכרחיות הנדרשות להגדרת המדפסת ויאפשר לך להגדיר את מנהל "
"ההתקן, אפשרויות המדפסת וסוגי חיבור שונים."

#: printer/printerdrake.pm:946
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"ברוך בואך אל אשף הגדרת המדפסת\n"
"\n"
"אשף זה יעזור לך להגדיר אם המדפסות המחוברות למחשב הזה, מחוברות ישירות אל הרשת "
"או על מכונת חלונות מרוחקת.\n"
"\n"
"נא לחבר ולהדליק את כל המדפסות שמחוברות אל המחשב הזה, בכדי שהן יזוהו "
"אוטומטית. מדפסות שמחוברות ישירות אל הרשת ומכונות חלונות צריכות להיות דלוקות "
"ומחוברות.\n"
"\n"
"נא לשים לב שזיהוי אוטומטי של מדפסות רשת לוקח יותר זמן מאשר מדפסות המחוברות "
"ישירות אל מחשב זה , לכן מומלץ לבטל את אפשרות של זהוי מדפסות רשת כאשר זה לא "
"נחוץ. מדפסות מרוחקות על מכונות חלונות לא צריכות את זה.\n"
"\n"
"נא ללחוץ על \"הבא\" בזמנך הפנוי או \"בטל\" אם אין צורך להגדיר מדפסות כעת."

#: printer/printerdrake.pm:955
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:963
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:972
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:981
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "זיהוי אוטומטי של מדפסות המחוברות למחשב זה"

#: printer/printerdrake.pm:984
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "זיהוי אוטומטי של מדפסות המחוברות ישירות לרשת מקומית"

#: printer/printerdrake.pm:987
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:1003
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
"\n"
"ברכותינו, המדפסת שלך מותקנת ומוגדרת! \n"
"\n"
"ניתן להשתמש בפקודת ההדפסה של היישומים (בדרך כלל תחת תפריט \"קובץ\"). \n"
"\n"
"אם ברצונך להוסיף, להסיר, או לשנות שם של מדפסת, או לשנות את הגדרות ברירי "
"המחדל (מגש נייר, איכות הדפסה וכו'), עליך לבחור בהגדרת ה\"מדפסת\" במדור ה"
"\"חומרה\" של מרכז הבקרה %s"

#: printer/printerdrake.pm:1038 printer/printerdrake.pm:1267
#: printer/printerdrake.pm:1329 printer/printerdrake.pm:1419
#: printer/printerdrake.pm:1556 printer/printerdrake.pm:1631
#: printer/printerdrake.pm:1782 printer/printerdrake.pm:1865
#: printer/printerdrake.pm:1874 printer/printerdrake.pm:1883
#: printer/printerdrake.pm:1894 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2111
#, c-format
msgid "Could not install the %s packages!"
msgstr "אין אפשרות להתקין את החבילות: %s !"

#: printer/printerdrake.pm:1040
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1046 printer/printerdrake.pm:1190
#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1678
#, c-format
msgid "Printer auto-detection"
msgstr "זיהוי מדפסת אוטומטי"

#: printer/printerdrake.pm:1046
#, c-format
msgid "Detecting devices..."
msgstr "מזהה התקנים..."

#: printer/printerdrake.pm:1075
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", מדפסת רשת \"%s\", חיבור %s"

#: printer/printerdrake.pm:1078
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1082
#, c-format
msgid "Detected %s"
msgstr ""

#: printer/printerdrake.pm:1087 printer/printerdrake.pm:1114
#: printer/printerdrake.pm:1132
#, c-format
msgid "Printer on parallel port #%s"
msgstr "מדפסת על יציאה מקבילית #%s"

#: printer/printerdrake.pm:1093
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "מדפסת רשת: \"%s\", יציאה %s"

#: printer/printerdrake.pm:1096
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1177
#, c-format
msgid "Local Printer"
msgstr ""

#: printer/printerdrake.pm:1178
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"לא נמצאה מדפסת מקומית! בכדי להגדיר מדפסת באופן ידני עליך להכניס את שם ההתקן/"
"שם הקובץ בשורת הקלט (יציאות מקביליות: /dev/lp0  dev/lp1, ..., זהים ל LPT1:, "
"LPT2:, ..., מדפסת USB ראשונה: /dev/usb/lp0, מדפסת USB שניה: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1182
#, c-format
msgid "You must enter a device or file name!"
msgstr "חובה להגדיר שם התקן אם שם קובץ!"

#: printer/printerdrake.pm:1191
#, c-format
msgid "No printer found!"
msgstr "לא נמצאה מדפסת!"

#: printer/printerdrake.pm:1199
#, c-format
msgid "Local Printers"
msgstr "מדפסות מקומיות"

#: printer/printerdrake.pm:1200
#, c-format
msgid "Available printers"
msgstr "מדפסות זמינות"

#: printer/printerdrake.pm:1204 printer/printerdrake.pm:1213
#, c-format
msgid "The following printer was auto-detected. "
msgstr "המדפסות הבאות זוהו באופן אוטומטי. "

#: printer/printerdrake.pm:1206
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr "אם התקן זה הוא לא זה שברצונך להגדיר, הכנס את שם ההתקן בשורת הקלט"

#: printer/printerdrake.pm:1207
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1208 printer/printerdrake.pm:1217
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "להלן רשימה של כל המדפסות המזוהות אוטומטית. "

#: printer/printerdrake.pm:1210
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1211
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1215
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"הגדרת המדפסת תהיה אוטומטית אם סוג המדפסת שלך לא זוהה אוטומטית או אם נבחרה "
"תצורת מדפסת מותאמת אישית ב\"תצורה ידנית\""

#: printer/printerdrake.pm:1216
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1219
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1220
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr ""

#: printer/printerdrake.pm:1222
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"עליך לבחור את היציאה שהמדפסת שלך מחוברת אליה, או לכתוב שם התקן או שם קובץ "
"בשורת הקלט"

#: printer/printerdrake.pm:1223
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "עליך לבחור את היציאה שהמדפסת שלך מחוברת אליה."

#: printer/printerdrake.pm:1225
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1229
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "חובה לרשום/לבחור מדפסת או התקן!"

#: printer/printerdrake.pm:1269 printer/printerdrake.pm:1331
#: printer/printerdrake.pm:1421 printer/printerdrake.pm:1558
#: printer/printerdrake.pm:1633 printer/printerdrake.pm:1784
#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1876
#: printer/printerdrake.pm:1885 printer/printerdrake.pm:1896
#, c-format
msgid "Aborting"
msgstr "מבטל"

#: printer/printerdrake.pm:1304
#, c-format
msgid "Remote lpd Printer Options"
msgstr "אפשרויות מדפסת lpd מרוחקת"

#: printer/printerdrake.pm:1305
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"בכדי להשתמש במדפסת lpd מרוחקת, יש לספק את שם המארח של שרת ההדפסה ושם המדפסת "
"על השרת."

#: printer/printerdrake.pm:1306
#, c-format
msgid "Remote host name"
msgstr "שם שרת מרוחק"

#: printer/printerdrake.pm:1307
#, c-format
msgid "Remote printer name"
msgstr "שם מדפסת מרוחקת"

#: printer/printerdrake.pm:1310
#, c-format
msgid "Remote host name missing!"
msgstr "חסר שם מארח מרוחק!"

#: printer/printerdrake.pm:1314
#, c-format
msgid "Remote printer name missing!"
msgstr "חסר שם מדפסת מרוחקת!"

#: printer/printerdrake.pm:1343 printer/printerdrake.pm:1914
#: standalone/drakTermServ:429 standalone/drakTermServ:726
#: standalone/drakTermServ:742 standalone/drakTermServ:1405
#: standalone/drakTermServ:1413 standalone/drakTermServ:1424
#: standalone/drakbackup:513 standalone/drakbackup:619
#: standalone/drakbackup:654 standalone/drakbackup:774
#: standalone/harddrake2:237
#, c-format
msgid "Information"
msgstr "מידע"

#: printer/printerdrake.pm:1343 printer/printerdrake.pm:1914
#, c-format
msgid "Detected model: %s %s"
msgstr "זוהה דגם: %s %s"

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1678
#, c-format
msgid "Scanning network..."
msgstr "סורק את הרשת...."

#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1457
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", מדפסת \"%s\"  על שרת \"%s\" "

#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1460
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "מדפסת \"%s\" על שרת \"%s\""

#: printer/printerdrake.pm:1481
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "אפשרויות מדפסת SMB (חלונות 9x/nt)"

#: printer/printerdrake.pm:1482
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"בכדי להדפיס אל מדפסת SMB, יש לספק את שם שרת ב-SMB (נא לשים לב שהוא יכול "
"להיות שונה משם ה-TCP/IP!), וכנראה את הכתובת IP של שרת ההדפסות, בנוסף לשם "
"השיתוף של המדפסת להוספה ועוד שם משתמש או סיסמה וקבוצה בהתאם לצורך."

#: printer/printerdrake.pm:1483
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
"אם המדפסת הרצויה זוהתה אוטומטית, עליך לבחור אותה מהרשימה ואז להוסיף שם "
"משתמש, סיסמה, ו/או קבוצה אם צריך."

#: printer/printerdrake.pm:1485
#, c-format
msgid "SMB server host"
msgstr "מארח שרת SMB"

#: printer/printerdrake.pm:1486
#, c-format
msgid "SMB server IP"
msgstr "שרת SMB על בסיס IP"

#: printer/printerdrake.pm:1487
#, c-format
msgid "Share name"
msgstr "שם השיתוף"

#: printer/printerdrake.pm:1490
#, c-format
msgid "Workgroup"
msgstr "קבוצת עבודה"

#: printer/printerdrake.pm:1492
#, c-format
msgid "Auto-detected"
msgstr "זוהה-אוטומטית"

#: printer/printerdrake.pm:1502
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: printer/printerdrake.pm:1506
#, c-format
msgid "Samba share name missing!"
msgstr "שם שיתוף Samba חסר!"

#: printer/printerdrake.pm:1512
#, c-format
msgid "SECURITY WARNING!"
msgstr "אזהרת אבטחה!"

#: printer/printerdrake.pm:1513
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1523
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"הגדר את שרת החלונות שלך שיאפשר את המדפסת תחת פרוטוקול IPP והגדר אפשרות הדפסה "
"תחת מכונה זו עם סוג חיבור  \"%s\" ב Printerdrake\n"
".\n"

#: printer/printerdrake.pm:1526
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"לחבר את המדפסת לשרת Linux ותן למכונה או מכונות חלונות להתחבר בתור לקוח. \n"
"\n"
"האם אכן רצונך הוא להמשיך בהגדרת את המדפסת הזאת עכשיו?"

#: printer/printerdrake.pm:1604
#, c-format
msgid "NetWare Printer Options"
msgstr ""

#: printer/printerdrake.pm:1605
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""

#: printer/printerdrake.pm:1606
#, c-format
msgid "Printer Server"
msgstr ""

#: printer/printerdrake.pm:1607
#, c-format
msgid "Print Queue Name"
msgstr ""

#: printer/printerdrake.pm:1612
#, c-format
msgid "NCP server name missing!"
msgstr "שם שרת NCP חסר!"

#: printer/printerdrake.pm:1616
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:1689 printer/printerdrake.pm:1709
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1692 printer/printerdrake.pm:1712
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1733
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "אפשרויות מדפסת TCP/Socket"

#: printer/printerdrake.pm:1735
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:1736
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"בכדי להדפיס למדפסת TCP או שקע רשת, עליך לספק את שם המארח או כתובת ה IP של "
"המדפסת ובמידת האפשר את מספר היציאה(ברירת המחדל היא 9100). בשרתי HP JetDirect "
"מספר היציאה הוא בד\"כ 9100, בשרתים אחרים המצב עלול להיות שונה. עיין בחוברת "
"ההדרכה של החומרה שלך."

#: printer/printerdrake.pm:1740
#, c-format
msgid "Printer host name or IP missing!"
msgstr ""

#: printer/printerdrake.pm:1763
#, c-format
msgid "Printer host name or IP"
msgstr ""

#: printer/printerdrake.pm:1819
#, c-format
msgid "Refreshing Device URI list..."
msgstr "מרענן רשימת התקני URI..."

#: printer/printerdrake.pm:1822 printer/printerdrake.pm:1824
#, c-format
msgid "Printer Device URI"
msgstr ""

#: printer/printerdrake.pm:1823
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:1846
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: printer/printerdrake.pm:1949
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:1950
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:1951
#, c-format
msgid "Command line"
msgstr "שורת פקודה"

#: printer/printerdrake.pm:1955
#, c-format
msgid "A command line must be entered!"
msgstr "שורת פקודה חייבת להיות מוכנסת!"

#: printer/printerdrake.pm:1988
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
"an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""
"האם המדפסת שלך היא התקן רב-תכליתי מתוצרת HP או Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 עם סורק, DeskJet 450, Sony IJP-V100), HP "
"PhotoSmart או HP LaserJet 2200?"

#: printer/printerdrake.pm:2005
#, c-format
msgid "Installing HPOJ package..."
msgstr "מתקין חבילת HPOJ..."

#: printer/printerdrake.pm:2012
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2022 printer/printerdrake.pm:2148
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr "בודק התקן ומגדיר HPOJ..."

#: printer/printerdrake.pm:2065
#, c-format
msgid "Installing SANE packages..."
msgstr "התקנת חבילות של SANE...."

#: printer/printerdrake.pm:2078
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2105
#, c-format
msgid "Installing mtools packages..."
msgstr ""

#: printer/printerdrake.pm:2113
#, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2128
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "סורק את ההתקן הרב תכלתי של HP שלך"

#: printer/printerdrake.pm:2136
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2185
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "הופך את הפורט למדפסת לזמין בשביל CUPS..."

#: printer/printerdrake.pm:2194 printer/printerdrake.pm:2438
#: printer/printerdrake.pm:2580
#, c-format
msgid "Reading printer database..."
msgstr "קורא את מאגר הנתונים של המדפסות..."

#: printer/printerdrake.pm:2404
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "נא להכניס שם למדפסת והערה"

#: printer/printerdrake.pm:2408 printer/printerdrake.pm:3606
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "שם המדפסת צריך להכיל רק אותיות, מספרים וקו תחתון"

#: printer/printerdrake.pm:2414 printer/printerdrake.pm:3611
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"המדפסת \"%s\" כבר קיימת,\n"
"האם באמת ברצונך לדרוס את ההגדרות הקודמות?"

#: printer/printerdrake.pm:2423
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"לכל מדפסת יש להגדיר שם (למשל \"מדפסת\").\n"
"אין חובה למלא את שדות התיאור והמיקום. שדות\n"
"אלו משמשים לזיהוי המדפסת על ידי המשתמשים."

#: printer/printerdrake.pm:2424
#, c-format
msgid "Name of printer"
msgstr "שם המדפסת"

#: printer/printerdrake.pm:2425 standalone/drakconnect:568
#: standalone/harddrake2:34 standalone/printerdrake:218
#: standalone/printerdrake:225
#, c-format
msgid "Description"
msgstr "תיאור"

#: printer/printerdrake.pm:2426 standalone/printerdrake:218
#: standalone/printerdrake:225
#, c-format
msgid "Location"
msgstr "מיקום"

#: printer/printerdrake.pm:2443
#, c-format
msgid "Preparing printer database..."
msgstr "מכין את מאגר הנתונים של המדפסת..."

#: printer/printerdrake.pm:2559
#, c-format
msgid "Your printer model"
msgstr "דגם המדפסת שלך"

#: printer/printerdrake.pm:2560
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:2565 printer/printerdrake.pm:2568
#, c-format
msgid "The model is correct"
msgstr "הדגם נכון"

#: printer/printerdrake.pm:2566 printer/printerdrake.pm:2567
#: printer/printerdrake.pm:2570
#, c-format
msgid "Select model manually"
msgstr "בחירת דגם ידנית"

#: printer/printerdrake.pm:2593
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"נא לבדוק האם האשף זיהה נכון את דגם המדפסת שלך. עליך למצוא את הדגם ברשימה "
"כאשר הדגם לא זוהה נכון או כאשר נבחרה \"מדפסת כללית\". "

#: printer/printerdrake.pm:2612
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr "התקנת קובץ PPD שסופק ע\"י יצרן המדפסת"

#: printer/printerdrake.pm:2643
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:2644
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:2645
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:2646
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:2647
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:2648
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:2650
#, c-format
msgid "Install PPD file from"
msgstr "התקנת קובץ PPD מ"

#: printer/printerdrake.pm:2653 printer/printerdrake.pm:2661
#: standalone/scannerdrake:177 standalone/scannerdrake:186
#: standalone/scannerdrake:236 standalone/scannerdrake:244
#, c-format
msgid "Floppy Disk"
msgstr "תקליטון"

#: printer/printerdrake.pm:2654 printer/printerdrake.pm:2663
#: standalone/scannerdrake:178 standalone/scannerdrake:188
#: standalone/scannerdrake:237 standalone/scannerdrake:246
#, c-format
msgid "Other place"
msgstr "מקום אחר"

#: printer/printerdrake.pm:2669
#, c-format
msgid "Select PPD file"
msgstr "יש לבחור קובץ PPD"

#: printer/printerdrake.pm:2673
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:2679
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:2690
#, c-format
msgid "Installing PPD file..."
msgstr "מתקין קובץ PPD..."

#: printer/printerdrake.pm:2807
#, c-format
msgid "OKI winprinter configuration"
msgstr "הגדרת OKI winprinter"

#: printer/printerdrake.pm:2808
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:2833 printer/printerdrake.pm:2863
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "הגדרת Lexmark inkjet"

#: printer/printerdrake.pm:2834
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:2864
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:2874
#, c-format
msgid "Lexmark X125 configuration"
msgstr "הגדרת Lexmark X125"

#: printer/printerdrake.pm:2875
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:2897
#, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "הגדרת Samsung ML/QL-85G"

#: printer/printerdrake.pm:2898 printer/printerdrake.pm:2925
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:2924
#, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "הגדרת Canon LBP-460/660"

#: printer/printerdrake.pm:2943
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "עדכון קושחה עבור HP LaserJet 1000"

#: printer/printerdrake.pm:3056
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"הגדרות ברירת המחדל של המדפסת\n"
"\n"
"עליך לבדוק שגודל הדף וסוג הדיו/מצב ההדפסה (אם אפשר) וגם כל ההגדרות מוגדרים "
"נכון. יש לשים לב שהגדרת הדפסה באיכות/רזולוציה גבוהה המדפסת עלולה   להאיט את "
"ההדפסה."

#: printer/printerdrake.pm:3181
#, c-format
msgid "Printer default settings"
msgstr "הגדרות ברירת מחדל עבור המדפסת"

#: printer/printerdrake.pm:3188
#, c-format
msgid "Option %s must be an integer number!"
msgstr "אפשרות %s חייבת להיות מספר שלם!"

#: printer/printerdrake.pm:3192
#, c-format
msgid "Option %s must be a number!"
msgstr "אפשרות %s חייבת להיות מספר!"

#: printer/printerdrake.pm:3196
#, c-format
msgid "Option %s out of range!"
msgstr "אפשרות %s יצאה מהגבולות!"

#: printer/printerdrake.pm:3247
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"האם ברצונך ש\"%s\" תהיה מדפסת\n"
"ברירת המחדל?"

#: printer/printerdrake.pm:3262
#, c-format
msgid "Test pages"
msgstr "הדפסות ניסיון"

#: printer/printerdrake.pm:3263
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"עליך לבחור את הדפסות הניסיון שברצונך לנסות.\n"
"חשוב: הדפסת ניסיון של תמונה עלולה להימשך\n"
"זמן רב ובמדפסות לייזר עם זכרון נמוך זה עלול\n"
"אפילו לא להיות מודפס בכלל. ברוב המקרים יש\n"
"מספיק זכרון להדפסת דף ניסיון רגיל."

#: printer/printerdrake.pm:3267
#, c-format
msgid "No test pages"
msgstr "ללא הדפסת ניסיון"

#: printer/printerdrake.pm:3268
#, c-format
msgid "Print"
msgstr "הדפסה"

#: printer/printerdrake.pm:3293
#, c-format
msgid "Standard test page"
msgstr "הדפסת ניסיון רגילה"

#: printer/printerdrake.pm:3296
#, c-format
msgid "Alternative test page (Letter)"
msgstr "הדפסת ניסיון חליפית (מכתב)"

#: printer/printerdrake.pm:3299
#, c-format
msgid "Alternative test page (A4)"
msgstr "הדפסת ניסיון חליפית (A4)"

#: printer/printerdrake.pm:3301
#, c-format
msgid "Photo test page"
msgstr "הדפסת ניסיון של תמונה"

#: printer/printerdrake.pm:3305
#, c-format
msgid "Do not print any test page"
msgstr "לא להדפיס שום דף ניסיון"

#: printer/printerdrake.pm:3313 printer/printerdrake.pm:3485
#, c-format
msgid "Printing test page(s)..."
msgstr "מדפיס דפי ניסיון..."

#: printer/printerdrake.pm:3331
#, c-format
msgid "Could not install the %s package!"
msgstr "אין אפשרות להתקין את החבילה %s !"

#: printer/printerdrake.pm:3333
#, c-format
msgid "Skipping photo test page."
msgstr "מדלג על הדפסת ניסיון של תמונה."

#: printer/printerdrake.pm:3350
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"דפי הניסיון נשלחו להדפסה.\n"
"יכול להיות שייקח זמן מה עד שהמדפסת תתחיל בהדפסה.\n"
"מצב ההדפסה:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3354
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"דפי הניסיון נשלחו להדפסה.\n"
"יכול להיות שייקח כמה זמן עד שהמדפסת תתחיל בהדפסה.\n"

#: printer/printerdrake.pm:3364
#, c-format
msgid "Did it work properly?"
msgstr "האם הניסיון הצליח?"

#: printer/printerdrake.pm:3386 printer/printerdrake.pm:4689
#, c-format
msgid "Raw printer"
msgstr ""

#: printer/printerdrake.pm:3416
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"להדפסת קובץ משורת הפקודה (חלון המסוף) אתה יכול גם להשתמש בפקודה \"%s "
"<קובץ>או בכלי ההדפסה הגרפי: \"xpp <קובץ>\" או \"kprinter <קובץ>\". הכלים "
"הגרפיים מרשים לך לבחור את המדפסת ולשנות את הגדרת האפשרויות בקלות\n"

#: printer/printerdrake.pm:3418
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:3421 printer/printerdrake.pm:3438
#: printer/printerdrake.pm:3448
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:3424 printer/printerdrake.pm:3464
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"כדי לדעת על האפשרויות הטמונות במדפסת שלך יש לקרוא את הרשימה שכאן או ללחוץ על "
"כפתור \"רשימת אפשרויות הדפסה\".%s%s%s\n"
"\n"

#: printer/printerdrake.pm:3428
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"הנה רשימה של אפשרויות הקיימות במדפסת הנוכחית:\n"
"\n"

#: printer/printerdrake.pm:3433 printer/printerdrake.pm:3443
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"כדי להדפיס קובץ משורת הפקודה (המעטפת) יש להשתמש בפקודה \"%s <file>\".\n"

#: printer/printerdrake.pm:3435 printer/printerdrake.pm:3445
#: printer/printerdrake.pm:3455
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"פקודה זאת ניתנת לשימוש גם בשדה \"פקודת הדפסה\" של חלונות הדפסה של הרבה "
"יישומים. אך נא לא לספק את שם הקובץ כאן, כי הוא יסופק ע\"י היישום.\n"

#: printer/printerdrake.pm:3440 printer/printerdrake.pm:3450
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"כדי לדעת על האפשרויות הטמונות במדפסת שלך יש ללחוץ על כפתור \"רשימת אפשרויות "
"הדפסה\". "

#: printer/printerdrake.pm:3453
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"כדי להדפיס קובץ משורת הפקודה (המעטפת) יש להשתמש בפקודה \"%s <file>\" או \"%s "
"<file>\".\n"

#: printer/printerdrake.pm:3457
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"אתה יכול גם להשתמש במנשק הגרפי בשם \"xpdq\" בשביל להגדיר ולתפל בעבודות "
"הדפסה\n"
"אם אתה משתמש ב-KDE כשולחן עבודה יש לך \"כפתור פניקה \" זה סמל על שולחן "
"העבודה שמסומן ב \"הפסק הדפסה !\" אשר עוצר את כול ההדפסות מידית כאשר מפעילים "
"אותו. זה שימושי לדוגמה כאשר נייר נתקע במדפסת\n"

#: printer/printerdrake.pm:3461
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"הפקודות \"%s\" ו \"%s\" מאפשרות לשנות את ההגדרות לעבודות הדפסה מסוימות. פשוט "
"הוסף את ההגדרה שאתה רוצה לשורת הפקודה, למשל: \"%s <file>\".\n"

#: printer/printerdrake.pm:3471
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "מדפיס/סורק/כרטיס-תמונה ב\"%s\""

#: printer/printerdrake.pm:3472
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "מדפיס/סורק ב\"%s\""

#: printer/printerdrake.pm:3474
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "כניסה להדפסה/כרטיס-תמונה ב\"%s\""

#: printer/printerdrake.pm:3475
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "מדפיס על המדפסת \"%s\""

#: printer/printerdrake.pm:3481
#, c-format
msgid "Print option list"
msgstr "הדפסת רשימת אפשרויות"

#: printer/printerdrake.pm:3502
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"You do not need to run \"scannerdrake\" for setting up scanning on this "
"device, you only need to use \"scannerdrake\" if you want to share the "
"scanner on the network."
msgstr ""

#: printer/printerdrake.pm:3528
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: printer/printerdrake.pm:3570 printer/printerdrake.pm:3597
#: printer/printerdrake.pm:3632
#, c-format
msgid "Transfer printer configuration"
msgstr "העברת הגדרת מדפסת"

#: printer/printerdrake.pm:3571
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:3574
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:3576
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: printer/printerdrake.pm:3578
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: printer/printerdrake.pm:3580
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:3581
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"גם סוגים של מדפסות המוגדרות באמצעות קבצי ה-PPD שהופצו על ידי היצרן או עם "
"התקנים מקוררים של CUPS אינם יכולים להיות מועברים."

#: printer/printerdrake.pm:3582
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"יש לסמן את המדפסות שרוצים להעביר וללחוץ על\n"
"\"העברה\"."

#: printer/printerdrake.pm:3585
#, c-format
msgid "Do not transfer printers"
msgstr "נא לא להעביר את המדפסות"

#: printer/printerdrake.pm:3586 printer/printerdrake.pm:3602
#, c-format
msgid "Transfer"
msgstr "העברה"

#: printer/printerdrake.pm:3598
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"מדפסת בשם \"%s\" כבר קיימת תחת %s.\n"
"יש ללחוץ \"העברה\" כדי לדרוס שם זה.\n"
"באפשרותך גם לרשום שם חדש או לדלג על מדפסת זו."

#: printer/printerdrake.pm:3619
#, c-format
msgid "New printer name"
msgstr "שם המדפסת החדשה"

#: printer/printerdrake.pm:3622
#, c-format
msgid "Transferring %s..."
msgstr "מעביר את %s..."

#: printer/printerdrake.pm:3633
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:3643
#, c-format
msgid "Refreshing printer data..."
msgstr "מרענן מידע על המדפסת..."

#: printer/printerdrake.pm:3652
#, c-format
msgid "Starting network..."
msgstr "מפעיל שרותי רשת..."

#: printer/printerdrake.pm:3695 printer/printerdrake.pm:3699
#: printer/printerdrake.pm:3701
#, c-format
msgid "Configure the network now"
msgstr "הגדר את הרשת כעת"

#: printer/printerdrake.pm:3696
#, c-format
msgid "Network functionality not configured"
msgstr "תפקוד הרשת לא הוגדר"

#: printer/printerdrake.pm:3697
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: printer/printerdrake.pm:3700
#, c-format
msgid "Go on without configuring the network"
msgstr "המשך הלאה מבלי להגדיר את הרשת"

#: printer/printerdrake.pm:3735
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"אין אפשרות כרגע להפעיל את תצורת הרשת שהוגדרה במהלך ההתקנה. עליך לבדוק האם "
"הרשת נגישה לאחר אתחול המערכת ואז לתקן את ההגדרות דרך \"רשת ואינטרנט\"/\"חיבור"
"\" במרכז הבקרה %s, ולאחר מכן להגדיר שנית גם את המדפסת, ע\"י שימוש ב \"חומרה"
"\"/\"מדפסת\" של מרכז הבקרה %s."

#: printer/printerdrake.pm:3736
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: printer/printerdrake.pm:3746
#, c-format
msgid "Restarting printing system..."
msgstr "מאתחל את מערכת ההדפסה..."

#: printer/printerdrake.pm:3776
#, c-format
msgid "high"
msgstr "גבוהה"

#: printer/printerdrake.pm:3776
#, c-format
msgid "paranoid"
msgstr "פרנואידי"

#: printer/printerdrake.pm:3778
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "מערכת ההדפסה תוגדר עם סף אבטחה %s"

#: printer/printerdrake.pm:3779
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: printer/printerdrake.pm:3814
#, c-format
msgid "Starting the printing system at boot time"
msgstr "מתחיל את מערכת ההדפסה בזמן אתחול"

#: printer/printerdrake.pm:3815
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: printer/printerdrake.pm:3837
#, c-format
msgid "Checking installed software..."
msgstr "בדיקת תוכנות מותקנות..."

#: printer/printerdrake.pm:3843
#, c-format
msgid "Removing %s..."
msgstr "מסיר את %s ..."

#: printer/printerdrake.pm:3847
#, c-format
msgid "Could not remove the %s printing system!"
msgstr "אין אפשרות להסיר את מערכת ההדפסה %s !"

#: printer/printerdrake.pm:3863
#, c-format
msgid "Installing %s..."
msgstr "מתקין את %s ..."

#: printer/printerdrake.pm:3867
#, c-format
msgid "Could not install the %s printing system!"
msgstr "אין אפשרות להתקין את מערכת ההדפסה %s !"

#: printer/printerdrake.pm:3934
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:3936
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:3950
#, c-format
msgid "Name or IP of remote server:"
msgstr "שם או כתובת IP של שרת מרוחק:"

#: printer/printerdrake.pm:3970
#, c-format
msgid "Setting Default Printer..."
msgstr "הגדרת מדפסת ברירת מחדל..."

#: printer/printerdrake.pm:3989
#, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "שרות הדפסה CUPS מקומי או שרת CUPS מרוחק?"

#: printer/printerdrake.pm:3990
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:3992
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:3993
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:3994
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:3996
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:3997
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:3998
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4000
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4004 printer/printerdrake.pm:4019
#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4029
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4018
#, c-format
msgid "Local CUPS printing system"
msgstr "מערכת הדפסה CUPS מקומית"

#: printer/printerdrake.pm:4056
#, c-format
msgid "Select Printer Spooler"
msgstr ""

#: printer/printerdrake.pm:4057
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "באיזה מערכת הדפסה ברצונך להשתמש?"

#: printer/printerdrake.pm:4105
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "כישלון בהגדרת המדפסת \"%s\"!"

#: printer/printerdrake.pm:4118
#, c-format
msgid "Installing Foomatic..."
msgstr ""

#: printer/printerdrake.pm:4124
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr "לא יכול להתקין את החבילות %s ולפיכך אין אפשרות להפעיל את %s!"

#: printer/printerdrake.pm:4314
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"המדפסות הבאות מוגדרות במערכת. יש ללחוץ לחיצה כפולה\n"
"על מדפסת כדי לשנות את הגדרותיה, כדי להגדירה כמדפסת\n"
"ברירת המחדל, או כדי לראות מידע אודותיה. "

#: printer/printerdrake.pm:4344
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "רענון רשימת מדפסות (כדי להציג את כל מדפסות הCUPS המרוחקות הזמינות)"

#: printer/printerdrake.pm:4345
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "רענון רשימת מדפסות (כדי להציג את כל מדפסות הCUPS המרוחקות הזמינות)"

#: printer/printerdrake.pm:4356
#, c-format
msgid "CUPS configuration"
msgstr "הגדרת CUPS"

#: printer/printerdrake.pm:4368
#, c-format
msgid "Change the printing system"
msgstr "החלפת מערכת ההדפסה"

#: printer/printerdrake.pm:4377
#, c-format
msgid "Normal Mode"
msgstr "מצב רגיל"

#: printer/printerdrake.pm:4378
#, c-format
msgid "Expert Mode"
msgstr "מצב מומחה"

#: printer/printerdrake.pm:4632 printer/printerdrake.pm:4690
#: printer/printerdrake.pm:4768 printer/printerdrake.pm:4777
#, c-format
msgid "Printer options"
msgstr "אפשרויות מדפסת"

#: printer/printerdrake.pm:4668
#, c-format
msgid "Modify printer configuration"
msgstr "שינוי הגדרות מדפסת"

#: printer/printerdrake.pm:4670
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""
"מדפסת %s%s\n"
"מה ברצונך להגדיר במדפסת זו?"

#: printer/printerdrake.pm:4675
#, c-format
msgid "This printer is disabled"
msgstr "המדפסת מנוטרלת"

#: printer/printerdrake.pm:4677
#, c-format
msgid "Do it!"
msgstr "עשה זאת!"

#: printer/printerdrake.pm:4682 printer/printerdrake.pm:4737
#, c-format
msgid "Printer connection type"
msgstr "סוג חיבור מדפסת"

#: printer/printerdrake.pm:4683 printer/printerdrake.pm:4743
#, c-format
msgid "Printer name, description, location"
msgstr "שם מדפסת, תיאור, מיקום"

#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4761
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "יצרן מדפסת, דגם, מנהל התקן"

#: printer/printerdrake.pm:4686 printer/printerdrake.pm:4762
#, c-format
msgid "Printer manufacturer, model"
msgstr "יצרן מדפסת, דגם"

#: printer/printerdrake.pm:4692 printer/printerdrake.pm:4772
#, c-format
msgid "Set this printer as the default"
msgstr "הגדרת המדפסת כברירת מחדל"

#: printer/printerdrake.pm:4697 printer/printerdrake.pm:4778
#: printer/printerdrake.pm:4780
#, c-format
msgid "Enable Printer"
msgstr "אפשר מדפסת"

#: printer/printerdrake.pm:4700 printer/printerdrake.pm:4783
#: printer/printerdrake.pm:4785
#, c-format
msgid "Disable Printer"
msgstr "בטל מדפסת"

#: printer/printerdrake.pm:4701 printer/printerdrake.pm:4788
#, c-format
msgid "Print test pages"
msgstr "הדפסת דפי ניסיון"

#: printer/printerdrake.pm:4702 printer/printerdrake.pm:4790
#, c-format
msgid "Learn how to use this printer"
msgstr "לימוד כיצד להשתמש במדפסת זו"

#: printer/printerdrake.pm:4703 printer/printerdrake.pm:4792
#, c-format
msgid "Remove printer"
msgstr "הסרת מדפסת"

#: printer/printerdrake.pm:4750
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "מסיר מדפסת ישנה - \"%s\"..."

#: printer/printerdrake.pm:4781
#, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "המדפסת \"%s\" מאופשרת כעת."

#: printer/printerdrake.pm:4786
#, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "המדפסת \"%s\" מנוטרלת כעת."

#: printer/printerdrake.pm:4823
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "האם באמת ברצונך להסיר את המדפסת \"%s\"?"

#: printer/printerdrake.pm:4827
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "מסיר את המדפסת \"%s\"..."

#: printer/printerdrake.pm:4851
#, c-format
msgid "Default printer"
msgstr "מדפסת ברירת מחדל"

#: printer/printerdrake.pm:4852
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "המדפסת \"%s\" מוגדרת כעת כמדפסת ברירת מחדל."

#: raid.pm:36
#, c-format
msgid "Can't add a partition to _formatted_ RAID %s"
msgstr ""

#: raid.pm:132
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "אין מספיק מחיצות בשביל שלב ה-RAID %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:340
#: standalone/scannerdrake:415 standalone/scannerdrake:459
#: standalone/scannerdrake:463 standalone/scannerdrake:485
#: standalone/scannerdrake:550
#, c-format
msgid "Scannerdrake"
msgstr "אשף הגדרת סורק"

#: scanner.pm:201 standalone/scannerdrake:916
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr "קבלת/דחייה של icmp echo"

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "הרשה/אסור התחברות מרוחקת של הנהל (root)"

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "אפשר/אסור התחברות מקומית של המנהל (root)"

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr "אפשר/בטל דיווחי syslog למסוף 12"

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""
"אפשר/בטל הגנה מפני name resolution spoofing. אם \"%s\"\n"
"מסומן, תירשם כניסה ברישום של המערכת."

#: security/help.pm:80 standalone/draksec:213
#, c-format
msgid "Security Alerts:"
msgstr "התראות אבטחה:"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "אפשר בטל את הרישום של חבילות IPv4 מוזרות"

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr "אפשור של su רק מחברי קבוצת \"wheel\" או אפשור של su מכל משתמש."

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr "הפעלה/ביטול של בדיקות אבטחה יומיות"

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, c-format
msgid "Set the root umask."
msgstr "קביעת מסיכת מנהל (root umask)"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"אם נבחר, בדוק אחר:\n"
"\n"
"- סיסמאות ריקות \n"
"\n"
"- אין סיסמאות ב-/etc/shadow\n"
"\n"
"- משתמשים עם זיהוי משתמש 0, חוץ מאשר מנהל המערכת (root)."

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr "אם מסומן \"כן\", תבדקנה ההרשאות של הקבצים בספריות הבית של משתמשים."

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "אם מסומן \"כן\", יורצו בדיקות אבטחה מתוזמנות."

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
"אם מסומן \"כן\", ייבדקו הוספות או שינויים של קצבים שמסומנים suid של root."

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "אם מסומן \"כן\",דיווח תוצאת הבדיקה יישלח בדואר."

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "אם נקבע כחיובי, תוצאות הבדיקות ידווחו ברישום המערכת."

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, c-format
msgid "Set the user umask."
msgstr "קביעת ה-umask של המשתמש."

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr "אפשר התחברות מרוחקת של המנהל (root)"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr "רשימת המשתמשים במנהלי הפעלה (KDM ו-GDM)"

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, c-format
msgid "Allow X Window connections"
msgstr "אפשר התחברויות X Windows"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr "אשר חיבורי TCP  אל X Window"

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, c-format
msgid "Chkconfig obey msec rules"
msgstr ""

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr "דיווח של SysLog אל מסוף מספר 12"

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr "השתמש בסיסמה בכדי לזהות משתמשים"

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr "בדיקת אבטחה יומית"

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, c-format
msgid "No password aging for"
msgstr "סיסמה לא תפוג עבור"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr "הגדר משך זמן לפני תפוגת הסיסמה ויציאה מכלל פעולה של החשבון"

#: security/l10n.pm:39
#, c-format
msgid "Password history length"
msgstr "אורך היסטורית הסיסמאות"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr "האורך המינימלי של הסיסמה ומספר הספרות והאותיות גדולות"

#: security/l10n.pm:41
#, c-format
msgid "Root umask"
msgstr ""

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr "גודל היסטוריית בפקודות במסוף"

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr ""

#: security/l10n.pm:44
#, c-format
msgid "User umask"
msgstr "מסיכת משתמש (umask)"

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr "בדיקת יציאות פתוחות"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr "בדיקת הרשאות בספריות הבית של משתמשים"

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr "הרצת בדיקות האבטחה היומיות"

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "בדיקת הוספות או שינויים של קבצים שמסומנים SGID."

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "וידוא checksum של קבצי suid/sgid"

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr "בדיקת הוספה או גריעה של קבצי SUID של root"

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr "דווח על קבצים ללא שייכות"

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "בדיקה של קבצים/ספריות עם הרשאות כתיבה לכולם"

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr "הרצת בדיקות chkrootkit "

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr "ביצוע כמה בדיקות מול בסיס הנתונים של RPM"

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr "דווח תוצאות הבדיקה אל רישום המערכת (syslog)"

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr "דווח תוצאות בדיקה ישירות למסוף tty"

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "קבלת פנים לקראקרים"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "חלשה"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "גבוה"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "יותר גבוה"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "פרנואידי"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"זוהי ברירת המחדל של תצורת האבטחה המומלצת למחשב שישמש לחיבור לאינטרנט בתור "
"לקוח."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"תצורת אבטחה זו כוללת מספר הגבלות נוספות וכן הפעלת בדיקות שגרתיות מדי לילה."

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"תצורת אבטחה זו מאפשרת שימוש במערכת כשרת, אליו יכולים להתחבר לקוחות\n"
"רבים דרך הרשת. חשוב! אם המערכת שלך משמשת כלקוח אינטרנט בלבד,\n"
"מומלץ ביותר לבחור רמה נמוכה יותר."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"תצורת אבטחה זו מעניקה הגנה מירבית, וכל מאפייני האבטחה מופעלים בתצורתם "
"המגבילה ביותר."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "אפשרויות בסיסיות של DrakSec"

#: security/level.pm:56
#, c-format
msgid "Please choose the desired security level"
msgstr "בשלב זה עליך לבחור את סף האבטחה הרצוי מבין האפשרויות:"

#: security/level.pm:60
#, c-format
msgid "Security level"
msgstr "סף האבטחה"

#: security/level.pm:62
#, c-format
msgid "Use libsafe for servers"
msgstr ""

#: security/level.pm:63
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr "מנהל אבטחה (שם משתמש או דוא\"ל)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
"הפעלת מערכת הקול ALSA (ארכיטקטורת\n"
"קול מתקדמת ללינוקס)"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "תוכנת Anacron היא תוכנת לוח זמנים מחזורי פקודתי."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"השירות apmd נועד לניטור מצב הסוללה, ורישום\n"
"המצב דרך syslog. שימוש אפשרי בתכונה זו הוא\n"
"כיבוי מחשב נייד, כאשר הסוללה חלשה."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"הרצת פקודות לפי זמנים שנקבעו להרצתן\n"
"והרצת פקודות אצווה כאשר העומס במערכת נמוך."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"תהליך cron מאפשר ביצוע פעולות במערכת\n"
"בזמנים מחזוריים מוגדרים מראש. vixie cron\n"
"הוא גרסה משופרת המשפרת את רמת האבטחה\n"
"ומאפשרת אפשרויות הגדרה עוצמתיות יותר."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""
"FAM הוא תהליך רקע לניטור קבצים.\n"
"הוא משמש את KDE ו GNOME לזיהוי\n"
"קבצים שהשתנו."

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"תהליך רקע המזהה חומרה אשר\n"
"מחוברת למחשב, ומאפשר להגדיר\n"
"חומרה חדשה/שהשתנתה."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"תוכנת השרת internet superserver (ששמה הנפוץ הוא inetd) מאתחלת\n"
"שרותי אינטרנט רבים לפי הצורך. התכנה אחראית לאתחול שרותים רבים, \n"
"בניהם telnet, ftp, rsh, ו rlogin. נטרול inetd גורר אחריו נטרול של כל\n"
"השרותים שעליהם היא אחראית."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"חבילה זו טוענת את פריסת המקלדת אשר\n"
"מוגדרת ב-/etc/sysconfig/keymap. דבר זה\n"
"נשלט על ידי תוכנת העזר kbdconfig. מומלץ\n"
"להשאיר שרות הזה פעיל עבור רוב המערכות."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"יצירה אוטומטית של kernel heder בזמן אתחול\n"
"תחת boot/ עבור:\n"
"/usr/include/linux/{autoconf,version}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "זיהוי אוטומטי והגדרת חומרה בזמן אתחול."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"שרת וירטואלי של לינוקס, מטרתו לבנות שרת בעל ביצועים גבוהים \n"
"וזמינות גבוהה."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) הוא שרת כתובות מתחם  (DNS) המשמש לתרגום שמות מתחם לכתובות IP."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"מעגן ומנתק את כל מערכות הקבצים ברשת כגון\n"
"Network File System (NFS), SMB (Lan\n"
"Manager/Windows) ו NCP (NetWare)"

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"מפעיל/מנתק את כל ממשקי הרשת\n"
"המוגדרים להתחיל בזמן האתחול."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"פרוטוקול NFS, מיועד לשיתוף קבצים על גבי רשתות TCP/IP.\n"
"שרות זה מאפשר את פעולת הנעילה של קבצים על NFS."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""
"הדלקה אוטומטית של מקש numlock במסוף\n"
"ובמערכת הגרפית בזמן האתחול."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"תהליך זה מנהל חיבורי RPC, אשר משמשים\n"
"פרוטוקולים כגון NFS ו NIS. שרת portmap\n"
"חייב להיות מופעל במכונות אשר ישמשו כשרתים\n"
"עבור פרוטוקולים הדורשים שימוש ב RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"postfix היא תוכנת העברת דואר\n"
"ממחשב אחד לשני."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"שומר וטוען מצב אקראי במערכת לצורך\n"
"חילול משופר של מספרים אקראיים"

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"מקצה התקנים גולמיים (raw) להתקנים\n"
"מבוססי מקטעים (כגון מחיצות של כונן\n"
"קשיח). יכולת זו נדרשת ליישומים כגון\n"
"Oracle או נגני DVD"

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "טוען את מערכת הקול במחשב שלך"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "טוען את מנהלי ההתקן לחומרת הusb שלך."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr ""
"מפעיל את שרת הגופנים (זוהי פונקציה\n"
"בסיסית הנדרשת להפעלת ממשק גרפי\n"
" של-Xorg)"

#: services.pm:117 services.pm:159
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "עליך לבחור אלו שרותים יופעלו אוטומטית בזמן אתחול המחשב"

#: services.pm:129
#, c-format
msgid "Printing"
msgstr "הדפסה"

#: services.pm:130
#, c-format
msgid "Internet"
msgstr "אינטרנט"

#: services.pm:133
#, c-format
msgid "File sharing"
msgstr "שיתוף קבצים"

#: services.pm:140
#, c-format
msgid "Remote Administration"
msgstr "ניהול מרחוק"

#: services.pm:148
#, c-format
msgid "Database Server"
msgstr "שרת בסיס-נתונים"

#: services.pm:211
#, c-format
msgid "running"
msgstr "פועל"

#: services.pm:211
#, c-format
msgid "stopped"
msgstr "מופסק"

#: services.pm:215
#, c-format
msgid "Services and daemons"
msgstr "שרותים ותהליכי רקע"

#: services.pm:221
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"מצטער, אין מידע \n"
"נוסף על שירות זה."

#: services.pm:226 ugtk2.pm:1214
#, c-format
msgid "Info"
msgstr "מידע"

#: services.pm:229
#, c-format
msgid "Start when requested"
msgstr "הפעל לפי הצורך"

#: services.pm:229
#, c-format
msgid "On boot"
msgstr "בזמן אתחול"

#: services.pm:246
#, c-format
msgid "Start"
msgstr "הפעל"

#: services.pm:246
#, c-format
msgid "Stop"
msgstr "הפסק"

#: share/advertising/01.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr "<b>מהי מנדרייק-לינוקס?</b>"

#: share/advertising/01.pl:15
#, c-format
msgid "Welcome to <b>Mandrakelinux</b>!"
msgstr "ברוך בואך אל <b>מנדרייק-לינוקס</b>!"

#: share/advertising/01.pl:17
#, c-format
msgid ""
"Mandrakelinux is a <b>Linux distribution</b> that comprises the core of the "
"system, called the <b>operating system</b> (based on the Linux kernel) "
"together with <b>a lot of applications</b> meeting every need you could even "
"think of."
msgstr ""

#: share/advertising/01.pl:19
#, c-format
msgid ""
"Mandrakelinux is the most <b>user-friendly</b> Linux distribution today. It "
"is also one of the <b>most widely used</b> Linux distributions worldwide!"
msgstr ""
"מנדרייק-לינוקס היא הפצת הלינוקס <b>הידידותית ביותר<b/> כיום. מנדרייק-לינוקס "
"היא גם אחת מהפצות הלינוקס <b>הפופולריות ביותר<b/> בעולם!"

#: share/advertising/02.pl:13
#, c-format
msgid "<b>Open Source</b>"
msgstr "<b>קוד פתוח</b>"

#: share/advertising/02.pl:15
#, c-format
msgid "Welcome to the <b>world of open source</b>!"
msgstr "ברוך בואך ל<b>עולם הקוד הפתוח<b/>!"

#: share/advertising/02.pl:17
#, c-format
msgid ""
"Mandrakelinux is committed to the open source model. This means that this "
"new release is the result of <b>collaboration</b> between <b>Mandrakesoft's "
"team of developers</b> and the <b>worldwide community</b> of Mandrakelinux "
"contributors."
msgstr ""
"מנדרייק-לינוקס מחוייבת למודל הקוד הפתוח. משמעות הדבר היא שגרסת הפצה חדשה זו "
"היא תוצר של <b>שיתוף פעולה</b> בין </b>צוות המפתחים של מנדרייק<b> ו</"
"b>הקהיליה הבינלאומית<b> של המפתחים והמתרגמים של מנדרייק-לינוקס ברחבי העולם."

#: share/advertising/02.pl:19
#, c-format
msgid ""
"We would like to <b>thank</b> everyone who participated in the development "
"of this latest release."
msgstr "ברצוננו <b>להודות<b> לכל אלו שהשתתפו בפיתוח של גרסה זו."

#: share/advertising/03.pl:13
#, c-format
msgid "<b>The GPL</b>"
msgstr "<b>רשיון הGPL</b>"

#: share/advertising/03.pl:15
#, c-format
msgid ""
"Most of the software included in the distribution and all of the "
"Mandrakelinux tools are licensed under the <b>General Public License</b>."
msgstr ""

#: share/advertising/03.pl:17
#, c-format
msgid ""
"The GPL is at the heart of the open source model; it grants everyone the "
"<b>freedom</b> to use, study, distribute and improve the software any way "
"they want, provided they make the results available."
msgstr ""

#: share/advertising/03.pl:19
#, c-format
msgid ""
"The main benefit of this is that the number of developers is virtually "
"<b>unlimited</b>, resulting in <b>very high quality</b> software."
msgstr ""

#: share/advertising/04.pl:13
#, c-format
msgid "<b>Join the Community</b>"
msgstr "<b>הצטרפות לקהילה</b>"

#: share/advertising/04.pl:15
#, c-format
msgid ""
"Mandrakelinux has one of the <b>biggest communities</b> of users and "
"developers. The role of such a community is very wide, ranging from bug "
"reporting to the development of new applications. The community plays a "
"<b>key role</b> in the Mandrakelinux world."
msgstr ""

#: share/advertising/04.pl:17
#, c-format
msgid ""
"To <b>learn more</b> about our dynamic community, please visit <b>www."
"mandrakelinux.com</b> or directly <b>www.mandrakelinux.com/en/cookerdevel."
"php3</b> if you would like to get <b>involved</b> in the development."
msgstr ""

#: share/advertising/05.pl:13
#, c-format
msgid "<b>Download Version</b>"
msgstr "<b>גרסת ההורדה</b>"

#: share/advertising/05.pl:15
#, c-format
msgid ""
"You are now installing <b>Mandrakelinux Download</b>. This is the free "
"version that Mandrakesoft wants to keep <b>available to everyone</b>."
msgstr ""

#: share/advertising/05.pl:17
#, c-format
msgid ""
"The Download version <b>cannot include</b> all the software that is not open "
"source. Therefore, you won't find in the Download version:"
msgstr ""

#: share/advertising/05.pl:18
#, c-format
msgid ""
"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
msgstr ""

#: share/advertising/05.pl:19
#, c-format
msgid ""
"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
"Flash™, etc.)."
msgstr ""

#: share/advertising/05.pl:21
#, c-format
msgid ""
"You won't have access to the <b>services included</b> in the other "
"Mandrakesoft products either."
msgstr ""

#: share/advertising/06.pl:13
#, c-format
msgid "<b>Discovery, Your First Linux Desktop</b>"
msgstr ""

#: share/advertising/06.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux Discovery</b>."
msgstr ""

#: share/advertising/06.pl:17
#, c-format
msgid ""
"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
"distribution. It includes a hand-picked selection of <b>premium software</b> "
"for office, multimedia and Internet activities. Its menu is task-oriented, "
"with a single application per task."
msgstr ""
"Discovery היא הפצת הלינוקס <b>הקלה</b> ו<b>הידידותית</b> ביותר לשימוש. היא "
"מכילה מבחר <b>יישומים איכותיים</b> שנבחרו בקפדנות לשימושים משרדיים, "
"מולטימדיה ואינטרנט. התפריט הוא מונחה-משימות, עם יישום בודד לכל משימה."

#: share/advertising/07.pl:13
#, c-format
msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
msgstr ""

#: share/advertising/07.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack</b>."
msgstr ""

#: share/advertising/07.pl:17
#, c-format
msgid ""
"PowerPack is Mandrakesoft's <b>premier Linux desktop</b> product. PowerPack "
"includes <b>thousands of applications</b> - everything from the most popular "
"to the most advanced."
msgstr ""

#: share/advertising/08.pl:13
#, c-format
msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
msgstr ""

#: share/advertising/08.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack+</b>."
msgstr ""

#: share/advertising/08.pl:17
#, c-format
msgid ""
"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
"applications</b> and a comprehensive selection of world-class <b>server "
"applications</b>."
msgstr ""

#: share/advertising/09.pl:13
#, c-format
msgid "<b>Mandrakesoft Products</b>"
msgstr "<b>מוצרי מנדרייקסופט</b>"

#: share/advertising/09.pl:15
#, c-format
msgid ""
"<b>Mandrakesoft</b> has developed a wide range of <b>Mandrakelinux</b> "
"products."
msgstr ""

#: share/advertising/09.pl:17
#, c-format
msgid "The Mandrakelinux 10.1 products are:"
msgstr "מוצרי מנדרייק-לינוקס 10.1 הם:"

#: share/advertising/09.pl:18
#, c-format
msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
msgstr ""

#: share/advertising/09.pl:19
#, c-format
msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
msgstr ""

#: share/advertising/09.pl:20
#, c-format
msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
msgstr ""

#: share/advertising/09.pl:21
#, c-format
msgid ""
"\t* <b>Mandrakelinux 10.1 for x86-64</b>, The Mandrakelinux solution for "
"making the most of your 64-bit processor."
msgstr ""

#: share/advertising/10.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Nomad Products)</b>"
msgstr ""

#: share/advertising/10.pl:15
#, c-format
msgid ""
"Mandrakesoft has developed two products that allow you to use Mandrakelinux "
"<b>on any computer</b> and without any need to actually install it:"
msgstr ""

#: share/advertising/10.pl:16
#, c-format
msgid ""
"\t* <b>Move</b>, a Mandrakelinux distribution that runs entirely from a "
"bootable CD-Rom."
msgstr ""

#: share/advertising/10.pl:17
#, c-format
msgid ""
"\t* <b>GlobeTrotter</b>, a Mandrakelinux distribution pre-installed on the "
"ultra-compact “LaCie Mobile Hard Drive”."
msgstr ""

#: share/advertising/11.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Professional Solutions)</b>"
msgstr "<b>מוצרי מנדרייקסופט (פתרונות מקצועיים)</b>"

#: share/advertising/11.pl:15
#, c-format
msgid ""
"Below are the Mandrakesoft products designed to meet the <b>professional "
"needs</b>:"
msgstr ""

#: share/advertising/11.pl:16
#, c-format
msgid "\t* <b>Corporate Desktop</b>, The Mandrakelinux Desktop for Businesses."
msgstr ""

#: share/advertising/11.pl:17
#, c-format
msgid "\t* <b>Corporate Server</b>, The Mandrakelinux Server Solution."
msgstr ""

#: share/advertising/11.pl:18
#, c-format
msgid "\t* <b>Multi-Network Firewall</b>, The Mandrakelinux Security Solution."
msgstr ""

#: share/advertising/12.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr "הבחירה ב KDE"

#: share/advertising/12.pl:15
#, c-format
msgid ""
"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
"and user-friendly <b>graphical desktop environment</b> available."
msgstr ""

#: share/advertising/12.pl:17
#, c-format
msgid ""
"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
"won't ever think of running another operating system!"
msgstr ""

#: share/advertising/12.pl:19
#, c-format
msgid ""
"KDE also includes a lot of <b>well integrated applications</b> such as "
"Konqueror, the web browser and Kontact, the personal information manager."
msgstr ""

#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
#, c-format
msgid "<b>Choose your Favorite Desktop Environment</b>"
msgstr "<b>בחירת סביבת העבודה הגרפית שלך</b>"

#: share/advertising/13-a.pl:15
#, c-format
msgid ""
"With PowerPack, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
#, c-format
msgid ""
"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
"desktop environment available. It includes a lot of integrated applications."
msgstr ""

#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
#, c-format
msgid ""
"But we advise you to try all available ones (including <b>GNOME</b>, "
"<b>IceWM</b>, etc.) and pick your favorite."
msgstr ""

#: share/advertising/13-b.pl:15
#, c-format
msgid ""
"With PowerPack+, you will have the choice of the <b>graphical desktop "
"environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/14.pl:13
#, c-format
msgid "<b>OpenOffice.org</b>"
msgstr "<b>אופן אופיס - משרד פתוח</b>"

#: share/advertising/14.pl:15
#, c-format
msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/14.pl:17
#, c-format
msgid ""
"It is a <b>full-featured office suite</b> that includes word processor, "
"spreadsheet, presentation and drawing applications."
msgstr ""

#: share/advertising/14.pl:19
#, c-format
msgid ""
"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
"documents such as Word, Excel and PowerPoint® files."
msgstr ""

#: share/advertising/15.pl:13
#, c-format
msgid "<b>Kontact</b>"
msgstr "<b>Kontact</b>"

#: share/advertising/15.pl:15
#, c-format
msgid ""
"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
msgstr ""

#: share/advertising/15.pl:17
#, c-format
msgid ""
"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
"b>!"
msgstr ""
"Kontact היא יותר מסתם תוכנת <b>דוא\"ל</b>, Kontact מכילה גם <b>פנקס כתובות</"
"b>, <b>לוח שנה</b> וכן כלי ל<b>רישום הערות</b>!"

#: share/advertising/15.pl:19
#, c-format
msgid ""
"It is the easiest way to communicate with your contacts and to organize your "
"time."
msgstr ""

#: share/advertising/16.pl:13
#, c-format
msgid "<b>Surf the Internet</b>"
msgstr "<b>לגלוש באינטרנט</b>"

#: share/advertising/16.pl:15
#, c-format
msgid "Discovery will give you access to <b>every Internet resource</b>:"
msgstr ""

#: share/advertising/16.pl:16
#, c-format
msgid "\t* Browse the <b>Web</b> with Konqueror."
msgstr ""

#: share/advertising/16.pl:17
#, c-format
msgid "\t* <b>Chat</b> online with your friends using Kopete."
msgstr ""

#: share/advertising/16.pl:18
#, c-format
msgid "\t* <b>Transfer</b> files with KBear."
msgstr "\t* <b>העברת</b> קבצים עם KBear."

#: share/advertising/16.pl:19 share/advertising/17.pl:19
#: share/advertising/18.pl:22
#, c-format
msgid "\t* ..."
msgstr "\t* ..."

#: share/advertising/17.pl:13
#, c-format
msgid "<b>Enjoy our Multimedia Features</b>"
msgstr ""

#: share/advertising/17.pl:15
#, c-format
msgid "Discovery will also make <b>multimedia</b> very easy for you:"
msgstr ""

#: share/advertising/17.pl:16
#, c-format
msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
msgstr ""

#: share/advertising/17.pl:17
#, c-format
msgid "\t* Listen to your <b>music files</b> with amaroK."
msgstr ""

#: share/advertising/17.pl:18
#, c-format
msgid "\t* Edit and create <b>images</b> with the GIMP."
msgstr ""

#: share/advertising/18.pl:13
#, c-format
msgid "<b>Enjoy the Wide Range of Applications</b>"
msgstr ""

#: share/advertising/18.pl:15
#, c-format
msgid ""
"In the Mandrakelinux menu you will find <b>easy-to-use</b> applications for "
"<b>all of your tasks</b>:"
msgstr ""

#: share/advertising/18.pl:16
#, c-format
msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/18.pl:17
#, c-format
msgid ""
"\t* Manage your personal data with the integrated personal information "
"suites <b>Kontact</b> and <b>Evolution</b>."
msgstr ""
"\t* ניהול המידע האישי שלך עם ערכות ניהול המידע האישי המשולבות <b>Kontact</b> "
"ו<b>Evolution</b>."

#: share/advertising/18.pl:18
#, c-format
msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
msgstr ""

#: share/advertising/18.pl:19
#, c-format
msgid "\t* Participate in online chat with <b>Kopete</b>."
msgstr ""

#: share/advertising/18.pl:20
#, c-format
msgid ""
"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
"<b>videos</b>."
msgstr ""

#: share/advertising/18.pl:21
#, c-format
msgid "\t* Edit and create images with the <b>GIMP</b>."
msgstr ""

#: share/advertising/19.pl:13
#, c-format
msgid "<b>Development Environments</b>"
msgstr "<b>סביבות פיתוח</b>"

#: share/advertising/19.pl:15 share/advertising/22.pl:15
#, c-format
msgid ""
"PowerPack gives you the best tools to <b>develop</b> your own applications."
msgstr ""

#: share/advertising/19.pl:17
#, c-format
msgid ""
"You will enjoy the powerful, integrated development environment from KDE, "
"<b>KDevelop</b>, which will let you program in a lot of languages."
msgstr ""

#: share/advertising/19.pl:19
#, c-format
msgid ""
"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
"b>, the associated debugger."
msgstr ""

#: share/advertising/20.pl:13
#, c-format
msgid "<b>Development Editors</b>"
msgstr "<b>עורכי פיתוח</b>"

#: share/advertising/20.pl:15
#, c-format
msgid "PowerPack will let you choose between those <b>popular editors</b>:"
msgstr ""

#: share/advertising/20.pl:16
#, c-format
msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
msgstr ""

#: share/advertising/20.pl:17
#, c-format
msgid ""
"\t* <b>XEmacs</b>: another open source text editor and application "
"development system."
msgstr ""

#: share/advertising/20.pl:18
#, c-format
msgid ""
"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
msgstr ""

#: share/advertising/21.pl:13
#, c-format
msgid "<b>Development Languages</b>"
msgstr "<b>שפות פיתוח</b>"

#: share/advertising/21.pl:15
#, c-format
msgid ""
"With all these <b>powerful tools</b>, you will be able to write applications "
"in <b>dozens of programming languages</b>:"
msgstr ""

#: share/advertising/21.pl:16
#, c-format
msgid "\t* The famous <b>C language</b>."
msgstr ""

#: share/advertising/21.pl:17
#, c-format
msgid "\t* Object oriented languages:"
msgstr ""

#: share/advertising/21.pl:18
#, c-format
msgid "\t\t* <b>C++</b>"
msgstr "\t\t* <b>C++</b>"

#: share/advertising/21.pl:19
#, c-format
msgid "\t\t* <b>Java™</b>"
msgstr "\t\t* <b>Java™</b>"

#: share/advertising/21.pl:20
#, c-format
msgid "\t* Scripting languages:"
msgstr "\t* שפות תסריטים:"

#: share/advertising/21.pl:21
#, c-format
msgid "\t\t* <b>Perl</b>"
msgstr "\t\t* <b>Perl</b>"

#: share/advertising/21.pl:22
#, c-format
msgid "\t\t* <b>Python</b>"
msgstr "\t\t* <b>Python</b>"

#: share/advertising/21.pl:23 share/advertising/28.pl:22
#, c-format
msgid "\t* And many more."
msgstr ""

#: share/advertising/22.pl:13
#, c-format
msgid "<b>Development Tools</b>"
msgstr "<b>כלי פיתוח</b>"

#: share/advertising/22.pl:17
#, c-format
msgid ""
"With the powerful integrated development environment <b>KDevelop</b> and the "
"leading Linux compiler <b>GCC</b>, you will be able to create applications "
"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
msgstr ""

#: share/advertising/23.pl:13
#, c-format
msgid "<b>Groupware Server</b>"
msgstr "<b>שרת שיתוף עבודה ארגוני</b>"

#: share/advertising/23.pl:15
#, c-format
msgid ""
"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
"allow you to:"
msgstr ""

#: share/advertising/23.pl:16
#, c-format
msgid "\t* Send and receive your <b>e-mails</b>."
msgstr "\t* שליחת וקבלת <b>הדוא\"ל</b> שלך."

#: share/advertising/23.pl:17
#, c-format
msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
msgstr ""

#: share/advertising/23.pl:18
#, c-format
msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
msgstr ""

#: share/advertising/24.pl:13
#, c-format
msgid "<b>Servers</b>"
msgstr "<b>שרתים</b>"

#: share/advertising/24.pl:15
#, c-format
msgid ""
"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/24.pl:16
#, c-format
msgid ""
"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
msgstr ""

#: share/advertising/24.pl:17
#, c-format
msgid "\t* <b>Apache</b>: The most widely used web server."
msgstr "\t* אפאצ'י: שרת האינטרנט הנפוץ ביותר"

#: share/advertising/24.pl:18
#, c-format
msgid ""
"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
"databases."
msgstr ""

#: share/advertising/24.pl:19
#, c-format
msgid ""
"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
"transparent version control system."
msgstr ""

#: share/advertising/24.pl:20
#, c-format
msgid ""
"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
msgstr ""

#: share/advertising/24.pl:21
#, c-format
msgid ""
"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
"servers."
msgstr ""

#: share/advertising/25.pl:13
#, c-format
msgid "<b>Mandrakelinux Control Center</b>"
msgstr "<b>מרכז הבקרה של מנדרייק-לינוקס</b>"

#: share/advertising/25.pl:15
#, c-format
msgid ""
"The <b>Mandrakelinux Control Center</b> is an essential collection of "
"Mandrakelinux-specific utilities designed to simplify the configuration of "
"your computer."
msgstr ""
"<b>מרכז הבקרה של מנדרייק-לינוקס</b> כולל מגוון כלי עזר ייחודיים למנדרייק "
"שיקלו את הגדרת תצורת המחשב שלך."

#: share/advertising/25.pl:17
#, c-format
msgid ""
"You will immediately appreciate this collection of <b>more than 60</b> handy "
"utilities for <b>easily configuring your system</b>: hardware devices, mount "
"points, network and Internet, security level of your computer, etc."
msgstr ""
"מגוון עזרים שימושי זה הכולל <b>יותר מ 60</b> כליםיאפשר לך <b>להגדיר את "
"המערכת שלך בקלות</b>: התקני חומרה, עיגון התקני מידע, הגדרת הרשת שלך והחיבור "
"לאינטרנט, קביעת סף האבטחה של המחשב, ועוד."

#: share/advertising/26.pl:13
#, c-format
msgid "<b>The Open Source Model</b>"
msgstr "<b>מודל הקוד הפתוח</b>"

#: share/advertising/26.pl:15
#, c-format
msgid ""
"Like all computer programming, open source software <b>requires time and "
"people</b> for development. In order to respect the open source philosophy, "
"Mandrakesoft sells added value products and services to <b>keep improving "
"Mandrakelinux</b>. If you want to <b>support the open source philosophy</b> "
"and the development of Mandrakelinux, <b>please</b> consider buying one of "
"our products or services!"
msgstr ""

#: share/advertising/27.pl:13
#, c-format
msgid "<b>Online Store</b>"
msgstr "<b>החנות המקוונת</b>"

#: share/advertising/27.pl:15
#, c-format
msgid ""
"To learn more about Mandrakesoft products and services, you can visit our "
"<b>e-commerce platform</b>."
msgstr ""
"<b>בחנות המקוונת</b> שלנו ניתן למצוא מגוון מוצרים ושרותים של מנדרייקסופט."

#: share/advertising/27.pl:17
#, c-format
msgid "There you can find all our products, services and third-party products."
msgstr ""

#: share/advertising/27.pl:19
#, c-format
msgid ""
"This platform has just been <b>redesigned</b> to improve its efficiency and "
"usability."
msgstr ""

#: share/advertising/27.pl:21
#, c-format
msgid "Stop by today at <b>store.mandrakesoft.com</b>!"
msgstr "אנו מזמינים אותך לבקר כבר היום בכתובת store.mandrakesoft.com"

#: share/advertising/28.pl:13
#, c-format
msgid "<b>Mandrakeclub</b>"
msgstr "<b>Mandrakeclub</b>"

#: share/advertising/28.pl:15
#, c-format
msgid ""
"<b>Mandrakeclub</b> is the <b>perfect companion</b> to your Mandrakelinux "
"product.."
msgstr ""

#: share/advertising/28.pl:17
#, c-format
msgid ""
"Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:"
msgstr ""
"הצטרפות ל מועדון-מנדרייק תעניק לך גישה ל<b>הטבות רבות ערך</b>, מוצרים "
"ושרותים, כגון:"

#: share/advertising/28.pl:18
#, c-format
msgid ""
"\t* <b>Special discounts</b> on products and services of our online store "
"<b>store.mandrakesoft.com</b>."
msgstr ""
"\t* <b>הנחות בלעדיות</b> על מוצרים ושרותים בחנות המקוונת שלנו <b>store."
"mandrakesoft.com</b>."

#: share/advertising/28.pl:19
#, c-format
msgid ""
"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
"drivers)."
msgstr ""

#: share/advertising/28.pl:20
#, c-format
msgid "\t* Participation in Mandrakelinux <b>user forums</b>."
msgstr ""

#: share/advertising/28.pl:21
#, c-format
msgid ""
"\t* <b>Early and privileged access</b>, before public release, to "
"Mandrakelinux <b>ISO images</b>."
msgstr ""

#: share/advertising/29.pl:13
#, c-format
msgid "<b>Mandrakeonline</b>"
msgstr "<b>חנות מנדרייק</b>"

#: share/advertising/29.pl:15
#, c-format
msgid ""
"<b>Mandrakeonline</b> is a new premium service that Mandrakesoft is proud to "
"offer its customers!"
msgstr ""

#: share/advertising/29.pl:17
#, c-format
msgid ""
"Mandrakeonline provides a wide range of valuable services for <b>easily "
"updating</b> your Mandrakelinux systems:"
msgstr ""

#: share/advertising/29.pl:18
#, c-format
msgid "\t* <b>Perfect</b> system security (automated software updates)."
msgstr ""

#: share/advertising/29.pl:19
#, c-format
msgid ""
"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
"desktop)."
msgstr ""

#: share/advertising/29.pl:20
#, c-format
msgid "\t* Flexible <b>scheduled</b> updates."
msgstr ""

#: share/advertising/29.pl:21
#, c-format
msgid ""
"\t* Management of <b>all your Mandrakelinux systems</b> with one account."
msgstr ""

#: share/advertising/30.pl:13
#, c-format
msgid "<b>Mandrakeexpert</b>"
msgstr "<b>מומחי מנדרייק</b>"

#: share/advertising/30.pl:15
#, c-format
msgid ""
"Do you require <b>assistance?</b> Meet Mandrakesoft's technical experts on "
"<b>our technical support platform</b> www.mandrakeexpert.com."
msgstr ""

#: share/advertising/30.pl:17
#, c-format
msgid ""
"Thanks to the help of <b>qualified Mandrakelinux experts</b>, you will save "
"a lot of time."
msgstr ""

#: share/advertising/30.pl:19
#, c-format
msgid ""
"For any question related to Mandrakelinux, you have the possibility to "
"purchase support incidents at <b>store.mandrakesoft.com</b>."
msgstr ""

#: share/compssUsers.pl:25
#, c-format
msgid "Office Workstation"
msgstr "תחנת עבודה משרדית"

#: share/compssUsers.pl:27
#, fuzzy, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"תוכנות משרד: מעבדי טקסט (kword, abiword), גיליונות אלקטרונים (kspread, "
"gnumeric),מציגי pdf, ועוד"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"תוכנות משרד: מעבדי טקסט (kword, abiword), גיליונות אלקטרונים (kspread, "
"gnumeric),מציגי pdf, ועוד"

#: share/compssUsers.pl:33
#, c-format
msgid "Game station"
msgstr "תחנת עבודה למשחקים"

#: share/compssUsers.pl:34
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "תוכנות לבידור: ארקייד, לוח, אסטרטגיה, ועוד"

#: share/compssUsers.pl:37
#, c-format
msgid "Multimedia station"
msgstr "תחנת עבודה למולטימדיה"

#: share/compssUsers.pl:38
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "תוכנות להשמעה או עריכה של קול ווידאו"

#: share/compssUsers.pl:43
#, c-format
msgid "Internet station"
msgstr "תחנת עבודה לאינטרנט"

#: share/compssUsers.pl:44
#, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"ערכת כלים לקריאה וכתיבת דוא\"ל וחדשות  (pine, mutt, tin..) ולגלישה באינטרנט"

#: share/compssUsers.pl:49
#, c-format
msgid "Network Computer (client)"
msgstr "מחשב רשת (לקוח)"

#: share/compssUsers.pl:50
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "לקוחות לפרוטוקולים שונים כולל ssh"

#: share/compssUsers.pl:54
#, c-format
msgid "Configuration"
msgstr "הגדרות"

#: share/compssUsers.pl:55
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "כלי עזר לביצוע הגדרות המחשב שלך"

#: share/compssUsers.pl:59
#, c-format
msgid "Console Tools"
msgstr "כלי מסוף"

#: share/compssUsers.pl:60
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "עורכים, מעטפות, כלי קבצים, מסופים"

#: share/compssUsers.pl:65 share/compssUsers.pl:165
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "ספריות פיתוח בC וC++, תוכנות וקבצי include"

#: share/compssUsers.pl:69 share/compssUsers.pl:169
#, c-format
msgid "Documentation"
msgstr "מסמכים"

#: share/compssUsers.pl:70 share/compssUsers.pl:170
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "ספרים ומדריכים לשימוש בלינוקס ותוכנה חופשית"

#: share/compssUsers.pl:74 share/compssUsers.pl:173
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:75 share/compssUsers.pl:174
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "תמיכה בתוכנות צד שלישי. Linux Standard Base"

#: share/compssUsers.pl:85
#, fuzzy, c-format
msgid "Apache"
msgstr "נתיב"

#: share/compssUsers.pl:88
#, fuzzy, c-format
msgid "Groupware"
msgstr "קבוצה"

#: share/compssUsers.pl:89
#, fuzzy, c-format
msgid "Kolab Server"
msgstr "שרת Samba"

#: share/compssUsers.pl:92 share/compssUsers.pl:133
#, c-format
msgid "Firewall/Router"
msgstr "חומת אש/נתב"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Internet gateway"
msgstr "שער לאינטרנט"

#: share/compssUsers.pl:96
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/קובץ/_חדש"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Postfix mail server, Inn news server"
msgstr "שרת דואר Postfix"

#: share/compssUsers.pl:100
#, fuzzy, c-format
msgid "Directory Server"
msgstr "הספריה ממנה יש לשחזר"

#: share/compssUsers.pl:104
#, fuzzy, c-format
msgid "FTP Server"
msgstr "שרת NTP"

#: share/compssUsers.pl:105
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:108
#, fuzzy, c-format
msgid "DNS/NIS"
msgstr "DNS"

#: share/compssUsers.pl:109
#, fuzzy, c-format
msgid "Domain Name and Network Information Server"
msgstr "שרת שמות מתחם"

#: share/compssUsers.pl:112
#, c-format
msgid "File and Printer Sharing Server"
msgstr ""

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "שרת Samba"

#: share/compssUsers.pl:116 share/compssUsers.pl:129
#, c-format
msgid "Database"
msgstr "בסיס נתונים"

#: share/compssUsers.pl:117
#, fuzzy, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "שרת בסיס-מידע של MySQL או PostgreSQL"

#: share/compssUsers.pl:121
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:122
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: share/compssUsers.pl:125
#, c-format
msgid "Mail"
msgstr "דואר"

#: share/compssUsers.pl:126
#, c-format
msgid "Postfix mail server"
msgstr "שרת דואר Postfix"

#: share/compssUsers.pl:130
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "שרת בסיס-מידע של MySQL או PostgreSQL"

#: share/compssUsers.pl:137
#, c-format
msgid "Network Computer server"
msgstr "שרת מחשב רשת"

#: share/compssUsers.pl:138
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "שרת NFS, שרת SMB, שרת Proxy, שרת ssh "

#: share/compssUsers.pl:146
#, c-format
msgid "KDE Workstation"
msgstr "תחנת עבודה של KDE"

#: share/compssUsers.pl:147
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr "סביבת שולחן העבודה K, סביבה גרפית בסיסית עם כלים"

#: share/compssUsers.pl:151
#, c-format
msgid "GNOME Workstation"
msgstr "תחנת עבודה של GNOME"

#: share/compssUsers.pl:152
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr "סביבה גרפית עם מערך של תוכנות ידידותיות למשתמש וכלי שולחן עבודה"

#: share/compssUsers.pl:155
#, c-format
msgid "Other Graphical Desktops"
msgstr "שולחנות העבודה הגרפיים האחרים"

#: share/compssUsers.pl:156
#, c-format
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ועוד"

#: share/compssUsers.pl:179
#, fuzzy, c-format
msgid "Utilities"
msgstr "הפיליפינים"

#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:381
#, c-format
msgid "SSH Server"
msgstr "שרת SSH"

#: share/compssUsers.pl:186
#, fuzzy, c-format
msgid "Webmin"
msgstr "מצלמת רשת"

#: share/compssUsers.pl:187
#, fuzzy, c-format
msgid "Webmin Remote Configuration Server"
msgstr "הגדרת Terminal Server"

#: share/compssUsers.pl:191
#, fuzzy, c-format
msgid "Network Utilities/Monitoring"
msgstr "תצוגת מצב רשת"

#: share/compssUsers.pl:192
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:196
#, fuzzy, c-format
msgid "MandrakeSoft Wizards"
msgstr "<b>מוצרי מנדרייקסופט</b>"

#: share/compssUsers.pl:197
#, fuzzy, c-format
msgid "Wizards to configure server"
msgstr "כישלון בהגדרת המדפסת \"%s\"!"

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"תוכנה זו היא תוכנה חופשית; מותר לך להפיצה מחדש ו/או לשנות אותה\n"
" על-פי תנאי הרישיון הציבורי הכללי של GNU כפי שפורסם על ידי\n"
"קרן התוכנה החופשית; בין אם גרסה 2 של הרישיון, ובין אם (לפי בחירתך)\n"
"כל גרסה מאוחרת שלו.\n"
"\n"
"תוכנית זו מופצת בתקווה שתהיה מועילה,\n"
"אבל בלא אחריות כלשהי; ואפילו ללא האחריות המשתמעת בדבר\n"
"מסחריותה או התאמתה למטרה מסויימת. לפרטים נוספים, עליך לעיין\n"
"ברישיון הציבורי הכללי של GNU.\n"
"\n"
"ביחד עם תוכנית זו היית אמור לקבל עותק של הרישיון הציבורי הכללי\n"
"של GNU; במידה שלא, עליך לכתוב ל Free Software Foundation, Inc.,\n"
" 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.\n"

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : שמירת ספריות ברירת מחדל\n"
"--debug               : הצגת את כל הודעות הדיבוג\n"
"--show-conf           : רשימת של קבצים ותיקיות לגיבוי\n"
"--config-info         : הסבר על אפשרויות הגדרת קובץ (for non-X users).\n"
"--daemon              : daemon שימוש בהגדרת . \n"
"--help                : הצגת מסך זה.\n"
"--version             : הצגת מספר גרסה.\n"

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrakelinux tools\n"
"  --incident        - program should be one of mandrakelinux tools"
msgstr ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - הדפסת הודעה זו.\n"
"  --report          - שם התוכנית צ\"ל אחד מהכלים של מנדרייק-לינוקס\n"
"  --incident        - שם התוכנית צ\"ל אחד מהכלים של מנדרייק-לינוקס"

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"\n"
"יישום לייבוא וניטור גופנים\n"
"\n"
"אפשרויות:\n"
"--windows_import : ייבוא מכל מחיצות חלונות הזמינות\n"
"--xls_fonts      : xls הצגת כל הגופנים שכבר קיימים ב\n"
"--install        : קבלת כל קובץ גופן או תיקייה.\n"
"--uninstall      : הסרת כל גופן או כל תיקיית גופנים.\n"
"--replace        : החלפת כל גופן אם קיים כבר\n"
"--application    : 0 שום יישום.\n"
"                 : 1 כל היישומים הזמינים נתמכים.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrakelinux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[OPTIONS]...\n"
"MandrakeLinux Terminal Server Configurator\n"
"--enable         : MTS אפשור\n"
"--disable        : MTS ביטול\n"
"--start          : MTS התחלת\n"
"--stop           : MTS עצירת\n"
"--adduser        : MTS הוספת משתמש מערכת קיים ל (requires username)\n"
"--deluser        : MTS מחיקת משתמש קיים מ(requires username)\n"
"--addclient      : MTS הוספת מחשב לקוח ל (requires MAC address, IP, nbi "
"image name)\n"
"--delclient      : MTS מחיקת מחשב לקוח מ(requires MAC address, IP, nbi image "
"name)"

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[מקלדת]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
"[אפשרויות]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : הצג ממשק זה כברירת מחדל\n"
"--connect : התחבר לאינטרנט אם לא מחובר כבר--disconnect : התנתק מהאינטרנט אם "
"מחובר כבר\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : החזר 1 אם מחובר, 0 אחרת--quiet : לפעול בצורה בלתי אינטראקטיבית"

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[OPTION]...\n"
"  --no-confirmation      לא לבקש אישור במצב עדכון-Mandrake\n"
"  --no-verify-rpm        לא לזהות חתימות חבילות\n"
"  --changelog-first      הצג רישום-שינוי לפני רשימת הקבצים בחלון התיאור\n"
"  --merge-all-rpmnew      שנמצאו .rpmnew/.rpmsave מיועד למזג את כל קבצי"

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"

#: standalone.pm:133
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "

#: standalone/XFdrake:85
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""

#: standalone/XFdrake:89
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:76
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:108 standalone/drakTermServ:114
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:125
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""
"%s: %s מצריך שם תחנה, כתובת MAC, כתובת IP, nbi-image, 0/1 עבור לקוח רזה, וגם "
"0/1 בשביל תצורה מקומית\n"

#: standalone/drakTermServ:131
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: %s דורש שם מארח...\n"

#: standalone/drakTermServ:213 standalone/drakTermServ:216
#, c-format
msgid "Terminal Server Configuration"
msgstr "הגדרת Terminal Server"

#: standalone/drakTermServ:231
#, c-format
msgid "Enable Server"
msgstr "אפשר שרת"

#: standalone/drakTermServ:237
#, c-format
msgid "Disable Server"
msgstr "בטל שרת"

#: standalone/drakTermServ:245
#, c-format
msgid "Start Server"
msgstr "התחל את השרת"

#: standalone/drakTermServ:251
#, c-format
msgid "Stop Server"
msgstr "עצירת השרת"

#: standalone/drakTermServ:259
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:263
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:269
#, c-format
msgid "Add/Del Users"
msgstr ""

#: standalone/drakTermServ:273
#, c-format
msgid "Add/Del Clients"
msgstr ""

#: standalone/drakTermServ:284 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "אשף הפעם הראשונה"

#: standalone/drakTermServ:315 standalone/drakTermServ:316
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:322
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:367
#, c-format
msgid "Cancel Wizard"
msgstr "ביטול האשף"

#: standalone/drakTermServ:379
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:407
#, c-format
msgid "Use thin clients."
msgstr "אפשר לקוחות רזים"

#: standalone/drakTermServ:409
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:421 standalone/drakTermServ:1034
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:428
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:429 standalone/drakTermServ:726
#: standalone/drakTermServ:742
#, c-format
msgid "This will take a few minutes."
msgstr "פעולה זו תמשך מספר דקות "

#: standalone/drakTermServ:433 standalone/drakTermServ:452
#, c-format
msgid "Done!"
msgstr "הסתיים!"

#: standalone/drakTermServ:438
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:458
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:493
#, c-format
msgid "Terminal Server Overview"
msgstr "סקירת Terminal Server"

#: standalone/drakTermServ:494
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:500
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:518
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:538
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:550
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:554
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:559
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:568
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:589
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:624
#, c-format
msgid "Boot Floppy"
msgstr "תקליטון אתחול"

#: standalone/drakTermServ:626
#, c-format
msgid "Boot ISO"
msgstr "Boot ISO"

#: standalone/drakTermServ:628
#, c-format
msgid "PXE Image"
msgstr "תצורת PXE"

#: standalone/drakTermServ:696
#, c-format
msgid "Default kernel version"
msgstr "גרסת ברירת מחדל של הגרעין"

#: standalone/drakTermServ:724
#, c-format
msgid "Build Whole Kernel -->"
msgstr "בניית גרעין שלמה -->"

#: standalone/drakTermServ:731
#, c-format
msgid "No kernel selected!"
msgstr "לא נבחר גרעין!"

#: standalone/drakTermServ:734
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:738
#, c-format
msgid "No NIC selected!"
msgstr "לא נבחר כרטיס רשת!"

#: standalone/drakTermServ:741
#, c-format
msgid "Build All Kernels -->"
msgstr "בניית כל הגרעינים -->"

#: standalone/drakTermServ:749
#, c-format
msgid "<-- Delete"
msgstr " <-- מחיקה "

#: standalone/drakTermServ:756
#, c-format
msgid "Delete All NBIs"
msgstr ""

#: standalone/drakTermServ:843
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:848
#, c-format
msgid "Add User -->"
msgstr "הוספת משתמש -->"

#: standalone/drakTermServ:854
#, c-format
msgid "<-- Del User"
msgstr "<- מחיקת משתמש"

#: standalone/drakTermServ:890
#, c-format
msgid "type: %s"
msgstr ""

#: standalone/drakTermServ:894
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:924
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "אפשר הגדרות חומרה מקומיות"

#: standalone/drakTermServ:933
#, c-format
msgid "No net boot images created!"
msgstr "לא נבחרו מראות אתחול לרשת!"

#: standalone/drakTermServ:951
#, c-format
msgid "Thin Client"
msgstr "לקוח רזה"

#: standalone/drakTermServ:955
#, c-format
msgid "Allow Thin Clients"
msgstr "אפשר לקוחות רזים"

#: standalone/drakTermServ:956
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:970
#, c-format
msgid "type: fat"
msgstr "סוג: שמן"

#: standalone/drakTermServ:971
#, c-format
msgid "type: thin"
msgstr "סוג: רזה"

#: standalone/drakTermServ:978
#, c-format
msgid "local config: false"
msgstr "הגדרות מקומיות: לא"

#: standalone/drakTermServ:979
#, c-format
msgid "local config: true"
msgstr "תצורה מקומית: לא"

#: standalone/drakTermServ:987
#, c-format
msgid "<-- Edit Client"
msgstr "<-- עריכת לקוח"

#: standalone/drakTermServ:1013
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1020
#, c-format
msgid "Delete Client"
msgstr ""

#: standalone/drakTermServ:1029
#, c-format
msgid "dhcpd Config..."
msgstr ""

#: standalone/drakTermServ:1045
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"יש צורך לאתחל את מנהל הכניסה כדי שהשינויים יכנסו לתוקף.\n"
"(להריץ במסוף \"service dm restart\")"

#: standalone/drakTermServ:1085
#, c-format
msgid "Thin clients won't work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1101
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1133
#, c-format
msgid "Subnet:"
msgstr "רשת משנה:"

#: standalone/drakTermServ:1140
#, c-format
msgid "Netmask:"
msgstr "מסיכת רשת:"

#: standalone/drakTermServ:1147
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1154
#, c-format
msgid "Subnet Mask:"
msgstr "מסיכת רשת:"

#: standalone/drakTermServ:1161
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1168
#, c-format
msgid "Domain Name:"
msgstr ""

#: standalone/drakTermServ:1176
#, c-format
msgid "Name Servers:"
msgstr ""

#: standalone/drakTermServ:1187
#, c-format
msgid "IP Range Start:"
msgstr "התחלה של טווחי כתובת IP:"

#: standalone/drakTermServ:1188
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1230
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1232
#, c-format
msgid "Write Config"
msgstr ""

#: standalone/drakTermServ:1248
#, c-format
msgid "dhcpd Server Configuration"
msgstr "תצורת לקוח DHCP"

#: standalone/drakTermServ:1249
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"רב הערכים הללו נלקחו מהמערכת הנוכחית שלך. \n"
"ניצן לשנות כנדרש"

#: standalone/drakTermServ:1252
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: standalone/drakTermServ:1399
#, c-format
msgid "Please insert floppy disk:"
msgstr "נא להכניס תקליטון:"

#: standalone/drakTermServ:1403
#, c-format
msgid "Couldn't access the floppy!"
msgstr "אין אפשרות גישה לתקליטון!"

#: standalone/drakTermServ:1405
#, c-format
msgid "Floppy can be removed now"
msgstr "ניתן להסיר את התקליטון עכשיו"

#: standalone/drakTermServ:1408
#, c-format
msgid "No floppy drive available!"
msgstr "אין כונן תקליטונים זמין!"

#: standalone/drakTermServ:1413
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1415
#, c-format
msgid "Error writing %s/%s"
msgstr "שגיאה בכתיבה ל %s/%s"

#: standalone/drakTermServ:1424
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1426
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1447
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1602
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1615
#, c-format
msgid "%s is not a user..\n"
msgstr ""

#: standalone/drakTermServ:1616
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr "%s הינו כבר משתמש Terminal Server \n"

#: standalone/drakTermServ:1618
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1620
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1666
#, c-format
msgid "Deleted %s...\n"
msgstr "%s נמחק...\n"

#: standalone/drakTermServ:1668 standalone/drakTermServ:1741
#, c-format
msgid "%s not found...\n"
msgstr ""

#: standalone/drakTermServ:1769
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "הקבצים /etc/hosts.allow ו /etc/hosts.deny כבר מוגדרים - אין שינוי"

#: standalone/drakTermServ:1921
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "התצורה השתנתה. האם לאתחל מחדש את clusternfs/dhcpd?"

#: standalone/drakautoinst:38
#, c-format
msgid "Error!"
msgstr "שגיאה!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "מגדיר ההתקנה האוטומטית"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr ""

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr ""

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr ""

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr "נא לבחור עבור כל צעד האם להריץ מחדש את ההתקנה, או האם היא תעשה ידנית."

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "יצירת תקליטון התקנה אוטומטי"

#: standalone/drakautoinst:90
#, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "עליך להכניס תקליטון ריק נוסף לכונן %s (עבור תקליטון מנהלי התקנים)"

#: standalone/drakautoinst:91
#, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "יצירת תקליטון התקנה אוטומטי (תקליטון מנהלי התקנים)"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:252 standalone/drakgw:600 standalone/drakvpn:902
#: standalone/scannerdrake:375
#, c-format
msgid "Congratulations!"
msgstr "ברכותינו!"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: standalone/drakautoinst:289
#, c-format
msgid "Auto Install"
msgstr "התקנה אוטומטית"

#: standalone/drakautoinst:358
#, c-format
msgid "Add an item"
msgstr ""

#: standalone/drakautoinst:365
#, c-format
msgid "Remove the last item"
msgstr "הסרת הפריט האחרון"

#: standalone/drakbackup:88
#, c-format
msgid "hd"
msgstr "כונן קשיח"

#: standalone/drakbackup:88
#, c-format
msgid "tape"
msgstr "טייפ"

#: standalone/drakbackup:153
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:154
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "שמור את סיסמת המערכת בתצורת drakbackup "

#: standalone/drakbackup:155
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""
"כמה פרוטוקולים כגון RSYNC, התצורה שלהם צריכה להיעשות בצד השרת. במקום להשתמש "
"בנתיב ספרייה ניתן להשתמש ב\"שם המודול\" עבוד נתיב השירות."

#: standalone/drakbackup:163
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:327
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:331
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:378
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:463 standalone/logdrake:437
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:467 standalone/logdrake:442
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""
"\"%s\" הוא משתמש במחשב המקומי, אבל לא הגדרת\n"
"שרת SMTP מקומי כך שעליך להזין כתובת דוא\"ל מלאה!"

#: standalone/drakbackup:476
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:478
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:480
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:526
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      DrakBackup Daemon Report\n"

#: standalone/drakbackup:532
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:557 standalone/drakbackup:628
#: standalone/drakbackup:684
#, c-format
msgid "Total progress"
msgstr "סך הכל התקדמות"

#: standalone/drakbackup:610
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s כבר קיים, האם למחוק? \n"
"\n"
"אזהרה: אם תהליך זה כבר נעשה, כנראה יהיה עליך\n"
"למחוק את הרשומה authorized_keys על השרת."

#: standalone/drakbackup:619
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:626
#, c-format
msgid "Cannot spawn %s."
msgstr "לא יכול לפצל את %s!"

#: standalone/drakbackup:643
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "אין בקשה לסיסמה ב-%s ביציאה %s"

#: standalone/drakbackup:644
#, c-format
msgid "Bad password on %s"
msgstr ""

#: standalone/drakbackup:645
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:646
#, c-format
msgid "Can't find %s on %s"
msgstr ""

#: standalone/drakbackup:650
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:654
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:698
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "אתר WebDAV מרוחק כבר מסונכרן!"

#: standalone/drakbackup:702
#, c-format
msgid "WebDAV transfer failed!"
msgstr "העברת WebDAV נכשלה!"

#: standalone/drakbackup:723
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:727
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:732
#, c-format
msgid "Not erasable media!"
msgstr "זהי לא מדיה הניתנת למחיקה!"

#: standalone/drakbackup:774
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:832
#, c-format
msgid "Permission problem accessing CD."
msgstr "בעיית הרשאה בעת גישה אל התקליטור"

#: standalone/drakbackup:859
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:966
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:985 standalone/drakbackup:1018
#, c-format
msgid "Backup system files..."
msgstr "גבוי של קבצי מערכת..."

#: standalone/drakbackup:1019 standalone/drakbackup:1060
#, c-format
msgid "Hard Disk Backup files..."
msgstr "קובצי גיבוי של הדיסק קשיח..."

#: standalone/drakbackup:1059
#, c-format
msgid "Backup User files..."
msgstr ""

#: standalone/drakbackup:1094
#, c-format
msgid "Backup Other files..."
msgstr "גיבוי של קבצים שונים ...."

#: standalone/drakbackup:1095
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "התקדמות גיבוי של הכונן קשיח..."

#: standalone/drakbackup:1100
#, c-format
msgid "No changes to backup!"
msgstr ""

#: standalone/drakbackup:1118 standalone/drakbackup:1142
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"התכנית Drakbackup מופעלת דרך %s: \n"
"\n"

#: standalone/drakbackup:1127
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1128
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr "חלה שגיאה בעת שליחת הקובץ דרך FTP. עליך לתקן את הגדרות ה FTP."

#: standalone/drakbackup:1130
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr "רשימת קבצים שנשלחה דרך FTP: %s\n"

#: standalone/drakbackup:1147
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1152
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1161
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1162
#, c-format
msgid " Error while sending mail. \n"
msgstr ""

#: standalone/drakbackup:1192
#, c-format
msgid "Can't create catalog!"
msgstr ""

#: standalone/drakbackup:1414
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"עליך לסמן את כל האפשרויות הדרושות לך.\n"

#: standalone/drakbackup:1415
#, c-format
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr "האפשרויות הללו יכולות לגבות ולשחזר את כל המידע בספרית /etc\n"

#: standalone/drakbackup:1416
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "גיבוי של קבצי מערכת (ספריית etc/)"

#: standalone/drakbackup:1417 standalone/drakbackup:1481
#: standalone/drakbackup:1547
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr "השתמש בשיטת גיבוי Incremental/Differential (אל תדרוס גיבויים קודמים)"

#: standalone/drakbackup:1419 standalone/drakbackup:1483
#: standalone/drakbackup:1549
#, c-format
msgid "Use Incremental Backups"
msgstr "שיטת גיבוי Incremental"

#: standalone/drakbackup:1419 standalone/drakbackup:1483
#: standalone/drakbackup:1549
#, c-format
msgid "Use Differential Backups"
msgstr "שיטת גיבוי DIfferential"

#: standalone/drakbackup:1421
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "אל תגבה מידע קריטי (passwd, group, fstab)"

#: standalone/drakbackup:1422
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr "עם אפשרות זו יהיה ביכולתך לשחזר כל גרסה של ספריית etc/ שלך."

#: standalone/drakbackup:1453
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""

#: standalone/drakbackup:1480
#, c-format
msgid "Do not include the browser cache"
msgstr "אל תכלול את זיכרון המטמון של הדפדפן"

#: standalone/drakbackup:1534
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "עליך לבחור את הקבצים או הספריות וללחוץ על 'המשך'"

#: standalone/drakbackup:1535 standalone/drakfont:660
#, c-format
msgid "Remove Selected"
msgstr "הסרת מסומנים"

#: standalone/drakbackup:1598
#, c-format
msgid "Users"
msgstr "משתמשים"

#: standalone/drakbackup:1618
#, c-format
msgid "Use network connection to backup"
msgstr "השתמש בחיבור רשת לגיבוי"

#: standalone/drakbackup:1620
#, c-format
msgid "Net Method:"
msgstr "שיטת רשת:"

#: standalone/drakbackup:1624
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1625
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1627
#, c-format
msgid "Transfer Now"
msgstr "העבר כעת"

#: standalone/drakbackup:1629
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1632
#, c-format
msgid "Host name or IP."
msgstr "שם מארח או כתובת IP"

#: standalone/drakbackup:1637
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr "ספריה (או מודול) בה יש לאחסן את הגיבוי במארח זה."

#: standalone/drakbackup:1649
#, c-format
msgid "Remember this password"
msgstr "זכור סיסמה זאת"

#: standalone/drakbackup:1665
#, c-format
msgid "Need hostname, username and password!"
msgstr "יש צורך בשם מארח, שם משתמש וסיסמה!"

#: standalone/drakbackup:1756
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "השתמש בתקליטור או DVDROM לגבוי"

#: standalone/drakbackup:1759
#, c-format
msgid "Choose your CD/DVD device"
msgstr "עליך לבחור את התקן התקליטור/DVD שלך"

#: standalone/drakbackup:1764
#, c-format
msgid "Choose your CD/DVD media size"
msgstr "עליך לבחור את גודל התקליטור/DVD"

#: standalone/drakbackup:1771
#, c-format
msgid "Multisession CD"
msgstr "תקליטור Multisession"

#: standalone/drakbackup:1773
#, c-format
msgid "CDRW media"
msgstr "מדיית CDRW"

#: standalone/drakbackup:1779
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "מחיקת מדיית ה RW (סיבוב ראשון)"

#: standalone/drakbackup:1780
#, c-format
msgid " Erase Now "
msgstr " מחק כעת "

#: standalone/drakbackup:1786
#, c-format
msgid "DVD+RW media"
msgstr "מדיית DVD+RW"

#: standalone/drakbackup:1788
#, c-format
msgid "DVD-R media"
msgstr "מדיית DVD-R"

#: standalone/drakbackup:1790
#, c-format
msgid "DVDRAM device"
msgstr "התקן DVDRAM"

#: standalone/drakbackup:1821
#, c-format
msgid "No CD device defined!"
msgstr "לא נבחר התקן תקליטור!"

#: standalone/drakbackup:1863
#, c-format
msgid "Use tape to backup"
msgstr "השתמש בטייפ לגיבוי"

#: standalone/drakbackup:1866
#, c-format
msgid "Device name to use for backup"
msgstr "שם התקן לשימוש עבור גיבוי"

#: standalone/drakbackup:1872
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1878
#, c-format
msgid "Don't rewind tape after backup"
msgstr "אל תעביר את קלטת הגיבוי להתחלה בסיום הפעולה"

#: standalone/drakbackup:1884
#, c-format
msgid "Erase tape before backup"
msgstr "מחק את קלטת הגיבוי לפני הפעולה"

#: standalone/drakbackup:1890
#, c-format
msgid "Eject tape after the backup"
msgstr "הוצא את קלטת הגיבוי בסיום הפעולה"

#: standalone/drakbackup:1962
#, c-format
msgid "Enter the directory to save to:"
msgstr "יש להקליד את הספריה אליה יש לשמור:"

#: standalone/drakbackup:1966
#, c-format
msgid "Directory to save to"
msgstr "הספריה אליה יש לשמור"

#: standalone/drakbackup:1971
#, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr ""
"גודל מירבי\n"
" מוקצב ל Draknackup ב-MB"

#: standalone/drakbackup:2035
#, c-format
msgid "CD-R / DVD-R"
msgstr "CD-R / DVD-R"

#: standalone/drakbackup:2040
#, c-format
msgid "HardDrive / NFS"
msgstr "כונן קשיח / NFS"

#: standalone/drakbackup:2055 standalone/drakbackup:2056
#: standalone/drakbackup:2061
#, c-format
msgid "hourly"
msgstr "כל שעה"

#: standalone/drakbackup:2055 standalone/drakbackup:2057
#: standalone/drakbackup:2062
#, c-format
msgid "daily"
msgstr "יומי"

#: standalone/drakbackup:2055 standalone/drakbackup:2058
#: standalone/drakbackup:2063
#, c-format
msgid "weekly"
msgstr "שבועי"

#: standalone/drakbackup:2055 standalone/drakbackup:2059
#: standalone/drakbackup:2064
#, c-format
msgid "monthly"
msgstr "חודשי"

#: standalone/drakbackup:2055 standalone/drakbackup:2060
#: standalone/drakbackup:2065
#, c-format
msgid "custom"
msgstr "מותאם אישית"

#: standalone/drakbackup:2069
#, c-format
msgid "January"
msgstr "ינואר"

#: standalone/drakbackup:2069
#, c-format
msgid "February"
msgstr "פברואר"

#: standalone/drakbackup:2069
#, c-format
msgid "March"
msgstr "מרץ"

#: standalone/drakbackup:2070
#, c-format
msgid "April"
msgstr "אפריל"

#: standalone/drakbackup:2070
#, c-format
msgid "May"
msgstr "מאי"

#: standalone/drakbackup:2070
#, c-format
msgid "June"
msgstr "יוני"

#: standalone/drakbackup:2070
#, c-format
msgid "July"
msgstr "יולי"

#: standalone/drakbackup:2070
#, c-format
msgid "August"
msgstr "אוגוסט"

#: standalone/drakbackup:2070
#, c-format
msgid "September"
msgstr "ספטמבר"

#: standalone/drakbackup:2071
#, c-format
msgid "October"
msgstr "אוקטובר"

#: standalone/drakbackup:2071
#, c-format
msgid "November"
msgstr "נובמבר"

#: standalone/drakbackup:2071
#, c-format
msgid "December"
msgstr "דצמבר"

#: standalone/drakbackup:2074
#, c-format
msgid "Sunday"
msgstr "ראשון"

#: standalone/drakbackup:2074
#, c-format
msgid "Monday"
msgstr "שני"

#: standalone/drakbackup:2074
#, c-format
msgid "Tuesday"
msgstr "שלישי"

#: standalone/drakbackup:2075
#, c-format
msgid "Wednesday"
msgstr "רביעי"

#: standalone/drakbackup:2075
#, c-format
msgid "Thursday"
msgstr "חמישי"

#: standalone/drakbackup:2075
#, c-format
msgid "Friday"
msgstr "שישי"

#: standalone/drakbackup:2075
#, c-format
msgid "Saturday"
msgstr "שבת"

#: standalone/drakbackup:2107
#, c-format
msgid "Use daemon"
msgstr "שימוש בתוכנת רקע"

#: standalone/drakbackup:2112
#, c-format
msgid "Please choose the time interval between each backup"
msgstr "נא לבחור מרווח זמן בין גיבויים"

#: standalone/drakbackup:2118
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2123
#, c-format
msgid "Minute"
msgstr "דקה"

#: standalone/drakbackup:2127
#, c-format
msgid "Hour"
msgstr "שעה"

#: standalone/drakbackup:2131
#, c-format
msgid "Day"
msgstr "יום"

#: standalone/drakbackup:2135
#, c-format
msgid "Month"
msgstr "חודש"

#: standalone/drakbackup:2139
#, c-format
msgid "Weekday"
msgstr "יום בשבוע"

#: standalone/drakbackup:2145
#, c-format
msgid "Please choose the media for backup."
msgstr "נא לבחור את סוג המדיה לגיבוי"

#: standalone/drakbackup:2152
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""

#: standalone/drakbackup:2153
#, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""

#: standalone/drakbackup:2201
#, c-format
msgid "Please choose the compression type"
msgstr "עליך לבחור את סוג הכיווץ"

#: standalone/drakbackup:2205
#, c-format
msgid "Use .backupignore files"
msgstr "השתמש בקבצי .backupignore "

#: standalone/drakbackup:2207
#, c-format
msgid "Send mail report after each backup to:"
msgstr "שלח דיווח דרך דוא\"ל לאחר כל גבוי אל:"

#: standalone/drakbackup:2213
#, c-format
msgid "SMTP server for mail:"
msgstr "שרת SMTP עבור דואר:"

#: standalone/drakbackup:2218
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2258
#, c-format
msgid "What"
msgstr "מה"

#: standalone/drakbackup:2263
#, c-format
msgid "Where"
msgstr "היכן"

#: standalone/drakbackup:2268
#, c-format
msgid "When"
msgstr "מתי"

#: standalone/drakbackup:2273
#, c-format
msgid "More Options"
msgstr "עוד אפשרויות"

#: standalone/drakbackup:2286
#, c-format
msgid "Backup destination not configured..."
msgstr "יעד הגיבוי לא הוגדר..."

#: standalone/drakbackup:2306 standalone/drakbackup:4229
#, c-format
msgid "Drakbackup Configuration"
msgstr "הגדרות DrakBackup"

#: standalone/drakbackup:2322
#, c-format
msgid "Please choose where you want to backup"
msgstr "נא לבחר לאן לגבות"

#: standalone/drakbackup:2325
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2325
#, c-format
msgid "Across Network"
msgstr "דרך רשת"

#: standalone/drakbackup:2325
#, c-format
msgid "On CD-R"
msgstr "על גבי התקליטור"

#: standalone/drakbackup:2325
#, c-format
msgid "On Tape Device"
msgstr "התקן טייפ"

#: standalone/drakbackup:2371
#, c-format
msgid "Backup Users"
msgstr "גיבוי משתמשים"

#: standalone/drakbackup:2372
#, c-format
msgid " (Default is all users)"
msgstr "(ברירת מחדל היא כל המשתמשים)"

#: standalone/drakbackup:2384
#, c-format
msgid "Please choose what you want to backup"
msgstr "עליך לבחור מה ברצונך לגבות"

#: standalone/drakbackup:2385
#, c-format
msgid "Backup System"
msgstr "גיבוי מערכת"

#: standalone/drakbackup:2387
#, c-format
msgid "Select user manually"
msgstr "עליך לבחור משתמש באופן ידני"

#: standalone/drakbackup:2416
#, c-format
msgid "Please select data to backup..."
msgstr "עליך לבחור את המידע שיש לגבות..."

#: standalone/drakbackup:2488
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"מקורות לגיבוי: \n"

#: standalone/drakbackup:2489
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- קבצי מערכת:\n"

#: standalone/drakbackup:2491
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- קבצי משתמשים:\n"

#: standalone/drakbackup:2493
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- קבצים אחרים:\n"

#: standalone/drakbackup:2495
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- שמירה על הכונן הקשיח בנתיב: %s\n"

#: standalone/drakbackup:2496
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\tהגבל את ניצול הכונן ל-%s MB\n"

#: standalone/drakbackup:2499
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- מחק קבצי tar מהכונן הקשיח לאחר הגיבוי.\n"

#: standalone/drakbackup:2504
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- צריבה לתקליטור"

#: standalone/drakbackup:2505
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2506
#, c-format
msgid " on device: %s"
msgstr "על התקן %s"

#: standalone/drakbackup:2507
#, c-format
msgid " (multi-session)"
msgstr " (multi-session)"

#: standalone/drakbackup:2508
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- שמור לטייפ על ההתקן: %s"

#: standalone/drakbackup:2509
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tמחיקה=%s"

#: standalone/drakbackup:2511
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2513
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- שמור ע\"י  %s על מחשב מארח: %s\n"

#: standalone/drakbackup:2514
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t שם משתמש: %s\n"
"\t\t בנתיב: %s \n"

#: standalone/drakbackup:2515
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- אפשרויות:\n"

#: standalone/drakbackup:2516
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tאל תכלול קבצי מערכת\n"

#: standalone/drakbackup:2518
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\tגבה בעזרת tar ו bzip2\n"

#: standalone/drakbackup:2519
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\tגבה בעזרת tar ו gzip\n"

#: standalone/drakbackup:2520
#, c-format
msgid "\tBackups use tar only\n"
msgstr "\tגבה בעזרת tar בלבד\n"

#: standalone/drakbackup:2522
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tהשתמש בקבצי .backupignore\n"

#: standalone/drakbackup:2523
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\tשלח דואר ל: %s\n"

#: standalone/drakbackup:2524
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "\tשימוש בשרת SMTP: %s\n"

#: standalone/drakbackup:2526
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- תהליך רקע, %s דרך:\n"

#: standalone/drakbackup:2527
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-כונן קשיח.\n"

#: standalone/drakbackup:2528
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: standalone/drakbackup:2529
#, c-format
msgid "\t-Tape \n"
msgstr "\t-טייפ \n"

#: standalone/drakbackup:2530
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t רשת דרך FTP.\n"

#: standalone/drakbackup:2531
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-רשת דרך SSH.\n"

#: standalone/drakbackup:2532
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-רשת דרך rsync.\n"

#: standalone/drakbackup:2533
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-רשת דרך webdav.\n"

#: standalone/drakbackup:2535
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "לא מוגדר. עליך ללחוץ על \"אשף\" או \"מתקדם\"/\n"

#: standalone/drakbackup:2540
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"רשימת מידע לשחזור:\n"
"\n"

#: standalone/drakbackup:2542
#, c-format
msgid "- Restore System Files.\n"
msgstr "- שחזור קבצי מערכת.\n"

#: standalone/drakbackup:2544 standalone/drakbackup:2554
#, c-format
msgid "   - from date: %s %s\n"
msgstr "   - מתאריך: %s %s\n"

#: standalone/drakbackup:2547
#, c-format
msgid "- Restore User Files: \n"
msgstr "- שחזור קבצי משתמש:\n"

#: standalone/drakbackup:2552
#, c-format
msgid "- Restore Other Files: \n"
msgstr "- שחזור קבצים אחרים:\n"

#: standalone/drakbackup:2731
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"רשימה של מידע הפגום:\n"
"\n"

#: standalone/drakbackup:2733
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "עליך לבטל את הסימון או להסיר אותו בפעם הבאה."

#: standalone/drakbackup:2743
#, c-format
msgid "Backup files are corrupted"
msgstr "קבצי הגיבוי פגומים"

#: standalone/drakbackup:2764
#, c-format
msgid "          All of your selected data have been          "
msgstr "            כל המידע שלך כבר           "

#: standalone/drakbackup:2765
#, c-format
msgid "          Successfully Restored on %s       "
msgstr "          שוחזר בהצלחה ל %s       "

#: standalone/drakbackup:2885
#, c-format
msgid "         Restore Configuration       "
msgstr "         הגדרת שחזור       "

#: standalone/drakbackup:2913
#, c-format
msgid "OK to restore the other files."
msgstr "אישור לשחזור הקבצים האחרים"

#: standalone/drakbackup:2929
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr "רשימת המשתמשים לשחזור (רק התאריך הכי עדכני למשתמש הוא הרלוונטי)"

#: standalone/drakbackup:2994
#, c-format
msgid "Please choose the date to restore:"
msgstr "עליך לבחור את התאריך שיש לשחזר:"

#: standalone/drakbackup:3031
#, c-format
msgid "Restore from Hard Disk."
msgstr "שחזור מהכונן הקשיח."

#: standalone/drakbackup:3033
#, c-format
msgid "Enter the directory where backups are stored"
msgstr "עליך לבחור את הספרייה בה הגיבויים מאוחסנים"

#: standalone/drakbackup:3037
#, c-format
msgid "Directory with backups"
msgstr "ספרייה עם גיבויים"

#: standalone/drakbackup:3091
#, c-format
msgid "Select another media to restore from"
msgstr "יש לבחור מדיה אחרת ממנה יש לשחזר"

#: standalone/drakbackup:3093
#, c-format
msgid "Other Media"
msgstr "מדיה אחרת"

#: standalone/drakbackup:3098
#, c-format
msgid "Restore system"
msgstr "שחזור מערכת"

#: standalone/drakbackup:3099
#, c-format
msgid "Restore Users"
msgstr "שחזור משתמשים"

#: standalone/drakbackup:3100
#, c-format
msgid "Restore Other"
msgstr "שחזור אחר"

#: standalone/drakbackup:3102
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "עליך לבחור את הנתיב אליו יש לשחזר (במקום /)"

#: standalone/drakbackup:3106 standalone/drakbackup:3388
#, c-format
msgid "Path To Restore To"
msgstr "הנתיב אליו יש לשחזר"

#: standalone/drakbackup:3109
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "צור גיבוי חדש לפני השחזור (רק לגיבויי incremental)"

#: standalone/drakbackup:3111
#, c-format
msgid "Remove user directories before restore."
msgstr "מחק את ספריות המשתמש לפני השחזור."

#: standalone/drakbackup:3196
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr "מחרוזת שיש לחפש בשם קובץ (מחרוזת ריקה תתאים לכל קובץ שהוא):"

#: standalone/drakbackup:3199
#, c-format
msgid "Search Backups"
msgstr "חיפוש גיבויים"

#: standalone/drakbackup:3217
#, c-format
msgid "No matches found..."
msgstr "לא נמצאו התאמות..."

#: standalone/drakbackup:3221
#, c-format
msgid "Restore Selected"
msgstr "שחזר מסומנים"

#: standalone/drakbackup:3356
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""
"עליך לבחור תאריך/זמן לצפיה בקבצי גיבוי.\n"
"לחיצה+Ctrl משמשת לבחירת מספר קבצים."

#: standalone/drakbackup:3362
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"שחזר מסומן \n"
"רשומה בקטלוג"

#: standalone/drakbackup:3371
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"שחזור קבצים\n"
"קבצים"

#: standalone/drakbackup:3448
#, c-format
msgid "Backup files not found at %s."
msgstr "קבצי גיבוי לא נמצאו ב-%s."

#: standalone/drakbackup:3461
#, c-format
msgid "Restore From CD"
msgstr "שחזור מתקליטור"

#: standalone/drakbackup:3461
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"עליך להכניס את התקליטור המזוהה על ידי\n"
"%s לכונן תחת נקודת העיגון /mnt/cdrom"

#: standalone/drakbackup:3463
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "זה לא התקליטור הנכון, התקליטור נקרא %s"

#: standalone/drakbackup:3473
#, c-format
msgid "Restore From Tape"
msgstr "שחזור מטייפ גיבוי"

#: standalone/drakbackup:3473
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"עליך להכניס את הקלטת המזוהה על ידי\n"
"%s להתקן טייפ הגיבוי %s"

#: standalone/drakbackup:3475
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "זו לא הקלטת הנכונה, הקלטת נקראת %s"

#: standalone/drakbackup:3486
#, c-format
msgid "Restore Via Network"
msgstr "שחזור דרך הרשת"

#: standalone/drakbackup:3486
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "שחזר באמצעות פרוטוקול רשת: %s"

#: standalone/drakbackup:3487
#, c-format
msgid "Host Name"
msgstr "שם המחשב המארח"

#: standalone/drakbackup:3488
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3495
#, c-format
msgid "Password required"
msgstr "נדרשת סיסמה"

#: standalone/drakbackup:3501
#, c-format
msgid "Username required"
msgstr "נדרש שם משתמש"

#: standalone/drakbackup:3504
#, c-format
msgid "Hostname required"
msgstr "נדרש שם השרת"

#: standalone/drakbackup:3509
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3522
#, c-format
msgid "Files Restored..."
msgstr "הקבצים שוחזרו..."

#: standalone/drakbackup:3525
#, c-format
msgid "Restore Failed..."
msgstr "השחזור נכשל..."

#: standalone/drakbackup:3543
#, c-format
msgid "%s not retrieved..."
msgstr "%s לא שוחזר..."

#: standalone/drakbackup:3765 standalone/drakbackup:3834
#, c-format
msgid "Search for files to restore"
msgstr "חפש קבצים לשחזור"

#: standalone/drakbackup:3769
#, c-format
msgid "Restore all backups"
msgstr "שחזר את כל הגיבויים"

#: standalone/drakbackup:3777
#, c-format
msgid "Custom Restore"
msgstr "התאמה אישית של השחזור"

#: standalone/drakbackup:3781 standalone/drakbackup:3830
#, c-format
msgid "Restore From Catalog"
msgstr "שחזור מהקטלוג"

#: standalone/drakbackup:3802
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr "לא יכול למצוא גיבויים לשחזור...\n"

#: standalone/drakbackup:3803
#, c-format
msgid "Verify that %s is the correct path"
msgstr "עליך לוודא שהנתיב %s נכון"

#: standalone/drakbackup:3804
#, c-format
msgid " and the CD is in the drive"
msgstr " והתקליטור נמצא בכונן"

#: standalone/drakbackup:3806
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr "יש להשתמש בקטלוג בכדי לשחזר גיבויים על מדיה שלא ניתנת לעיגון"

#: standalone/drakbackup:3822
#, c-format
msgid "CD in place - continue."
msgstr "התקליטור במקומו - המשך"

#: standalone/drakbackup:3827
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3828
#, c-format
msgid "Directory To Restore From"
msgstr "הספריה ממנה יש לשחזר"

#: standalone/drakbackup:3864
#, c-format
msgid "Restore Progress"
msgstr "התקדמות השחזור"

#: standalone/drakbackup:3919 standalone/drakbackup:3992
#: standalone/logdrake:173
#, c-format
msgid "Save"
msgstr "שמור"

#: standalone/drakbackup:3975
#, c-format
msgid "Build Backup"
msgstr "בנה גיבוי"

#: standalone/drakbackup:4008 standalone/drakbackup:4328
#, c-format
msgid "Restore"
msgstr "שחזר"

#: standalone/drakbackup:4096
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "החבילות הבאות יותקנו:\n"

#: standalone/drakbackup:4123
#, c-format
msgid "Please select data to restore..."
msgstr "נא לבחור מידע לשחזור..."

#: standalone/drakbackup:4163
#, c-format
msgid "Backup system files"
msgstr "גיבוי קבצי מערכת"

#: standalone/drakbackup:4166
#, c-format
msgid "Backup user files"
msgstr "גיבוי קבצי משתמש"

#: standalone/drakbackup:4169
#, c-format
msgid "Backup other files"
msgstr "גיבוי קבצים אחרים"

#: standalone/drakbackup:4172 standalone/drakbackup:4206
#, c-format
msgid "Total Progress"
msgstr "התקדמות כללית"

#: standalone/drakbackup:4198
#, c-format
msgid "Sending files by FTP"
msgstr "שולח קבצים דרך FTP"

#: standalone/drakbackup:4201
#, c-format
msgid "Sending files..."
msgstr "שולח קבצים..."

#: standalone/drakbackup:4271
#, c-format
msgid "Backup Now from configuration file"
msgstr "גבה כעת מקובץ תצורה"

#: standalone/drakbackup:4276
#, c-format
msgid "View Backup Configuration."
msgstr "הצגת תצורת גיבוי"

#: standalone/drakbackup:4302
#, c-format
msgid "Wizard Configuration"
msgstr "הגדרת האשף"

#: standalone/drakbackup:4307
#, c-format
msgid "Advanced Configuration"
msgstr "תצורה מתקדמת"

#: standalone/drakbackup:4312
#, c-format
msgid "View Configuration"
msgstr "הצגת הגדרות"

#: standalone/drakbackup:4316
#, c-format
msgid "View Last Log"
msgstr "תצוגה של רישום אחרון"

#: standalone/drakbackup:4321
#, c-format
msgid "Backup Now"
msgstr "גבה כעת"

#: standalone/drakbackup:4325
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"לא נמצא קובץ הגדרות. יש\n"
"לבחור באשף או ב\"מתקדם\"."

#: standalone/drakbackup:4345 standalone/drakbackup:4348
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:64
#, c-format
msgid "Graphical boot theme selection"
msgstr "בחירת ערכת אתחול גרפי"

#: standalone/drakboot:64
#, c-format
msgid "System mode"
msgstr "מצב מערכת"

#: standalone/drakboot:74 standalone/drakfloppy:47 standalone/harddrake2:171
#: standalone/harddrake2:172 standalone/logdrake:70
#: standalone/printerdrake:156 standalone/printerdrake:157
#: standalone/printerdrake:158
#, c-format
msgid "/_File"
msgstr "/_קובץ"

#: standalone/drakboot:75 standalone/drakfloppy:48 standalone/logdrake:76
#, c-format
msgid "/File/_Quit"
msgstr "/קובץ/_יציאה"

#: standalone/drakboot:75 standalone/drakfloppy:48 standalone/harddrake2:172
#: standalone/logdrake:76 standalone/printerdrake:158
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:148
#, c-format
msgid "Install themes"
msgstr "התקנת ערכות נושא"

#: standalone/drakboot:149
#, c-format
msgid "Create new theme"
msgstr "יצירת ערכת נושא חדשה"

#: standalone/drakboot:161
#, c-format
msgid "Use graphical boot"
msgstr "אתחול מערכת גרפי"

#: standalone/drakboot:166
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:167
#, c-format
msgid "Do you want to configure it now?"
msgstr "האם ברצונך לבצע את ההגדרות כעת?"

#: standalone/drakboot:177
#, c-format
msgid "Theme"
msgstr "ערכת נושא"

#: standalone/drakboot:180
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"הצגת ערכת נושא\n"
"תחת מסוף"

#: standalone/drakboot:189
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "הפעלת הסביבה הגרפית באתחול המערכת"

#: standalone/drakboot:197
#, c-format
msgid "No, I don't want autologin"
msgstr "יש לדרוש שם משתמש וסיסמה בכדי להכנס לחשבון"

#: standalone/drakboot:198
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "ברצוני להתחבר לחשבון אוטומטית עם נתונים אלו:"

#: standalone/drakboot:201
#, c-format
msgid "Default user"
msgstr "שם משתמש:"

#: standalone/drakboot:202
#, c-format
msgid "Default desktop"
msgstr "שולחן עבודה:"

#: standalone/drakboot:310
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, c-format
msgid "Mandrakelinux Bug Report Tool"
msgstr "כלי דיווח התקלות של מנדרייק-לינוקס"

#: standalone/drakbug:46
#, c-format
msgid "Mandrakelinux Control Center"
msgstr "מרכז הבקרה של מנדרייק-לינוקס"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr ""

#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:176
#: standalone/drakbug:178 standalone/drakbug:182
#, c-format
msgid "Standalone Tools"
msgstr "כלים עצמאיים"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandrakeonline"
msgstr "חנות מנדרייק"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr ""

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr ""

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "ניהול מאגרי תכנות"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr ""

#: standalone/drakbug:58
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr ""

#: standalone/drakbug:83
#, c-format
msgid "Application:"
msgstr "יישום:"

#: standalone/drakbug:84 standalone/drakbug:96
#, c-format
msgid "Package: "
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Kernel:"
msgstr "גרעין:"

#: standalone/drakbug:86 standalone/drakbug:97
#, c-format
msgid "Release: "
msgstr "שיחרור:"

#: standalone/drakbug:91
#, c-format
msgid ""
"Application Name\n"
"or Full Path:"
msgstr ""

#: standalone/drakbug:94
#, c-format
msgid "Find Package"
msgstr "איתור חבילה"

#: standalone/drakbug:98
#, c-format
msgid "Summary: "
msgstr "סיכום:"

#: standalone/drakbug:104
#, c-format
msgid "Bug Description/System Information"
msgstr "תירור התקלה/מידע אודות המערכת"

#: standalone/drakbug:105
#, c-format
msgid "YOUR TEXT HERE"
msgstr ""

#: standalone/drakbug:108
#, c-format
msgid "Submit kernel version"
msgstr "דיווח גרסת גרעין"

#: standalone/drakbug:109
#, c-format
msgid "Submit cpuinfo"
msgstr "דיווח מידע על המעבד"

#: standalone/drakbug:110
#, c-format
msgid "Submit lspci"
msgstr "דיווח מידע על התקני PCI"

#: standalone/drakbug:124
#, c-format
msgid ""
"To submit a bug report, click on the report button.\n"
"This will open  a web browser window on %s\n"
" where you'll find a form to fill in.  The information displayed above will "
"be \n"
"transferred to that server."
msgstr ""
"בכדי לדווח על תקלה, נא ללחוץ על כפתור הדיווח.\n"
"זה יפתח חלון דפדפן בכתובת %s\n"
"שם נמצא טופס שעליך למלא. במידע המוצג למעלה, יעבר לשרת זה."

#: standalone/drakbug:130
#, c-format
msgid "Report"
msgstr "דו\"ח"

#: standalone/drakbug:191
#, c-format
msgid "Not installed"
msgstr "לא מותקן"

#: standalone/drakbug:203
#, c-format
msgid "Package not installed"
msgstr "החבילה לא מותקנת"

#: standalone/drakbug:220
#, c-format
msgid "NOT FOUND"
msgstr ""

#: standalone/drakbug:227
#, c-format
msgid "connecting to %s..."
msgstr "מתחבר ל %s ..."

#: standalone/drakbug:235
#, c-format
msgid "No browser available! Please install one"
msgstr ""

#: standalone/drakbug:254
#, c-format
msgid "Please enter a package name."
msgstr "יש להכניס שם חבילה."

#: standalone/drakbug:260
#, c-format
msgid "Please enter summary text."
msgstr ""

#: standalone/drakclock:30
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:40
#, c-format
msgid "not defined"
msgstr "לא מוגדר"

#: standalone/drakclock:42
#, c-format
msgid "Change Time Zone"
msgstr "שינוי אזור זמן"

#: standalone/drakclock:46
#, c-format
msgid "Timezone - DrakClock"
msgstr ""

#: standalone/drakclock:48
#, c-format
msgid "GMT - DrakClock"
msgstr ""

#: standalone/drakclock:48
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "האם שעון החומרה שלך מוגדר ל-GMT?"

#: standalone/drakclock:76
#, c-format
msgid "Network Time Protocol"
msgstr "ממשק זמן רשת"

#: standalone/drakclock:78
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""
"יש באפשרותך לסנכן את שעון המחשב\n"
"עם שרת NTP (שרת זמן) מרוחק."

#: standalone/drakclock:79
#, c-format
msgid "Enable Network Time Protocol"
msgstr "אפשר סינכרון זמן דרך הרשת"

#: standalone/drakclock:87
#, c-format
msgid "Server:"
msgstr "שרת:"

#: standalone/drakclock:125
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:147 standalone/drakclock:157
#, c-format
msgid "Reset"
msgstr "איפוס"

#: standalone/drakclock:225
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""
"בכדי לאפשר סינכרון שעון דרך הרשת\n"
" נדרשת התקנת חבילת ntp\n"
"\n"
"האם ברצונך להתקין חבילה זו?"

#: standalone/drakconnect:85
#, c-format
msgid "Network configuration (%d adapters)"
msgstr ""

#: standalone/drakconnect:96 standalone/drakconnect:787
#, c-format
msgid "Gateway:"
msgstr "שער:"

#: standalone/drakconnect:96 standalone/drakconnect:787
#, c-format
msgid "Interface:"
msgstr "ממשק:"

#: standalone/drakconnect:100 standalone/net_monitor:122
#, c-format
msgid "Wait please"
msgstr "נא להמתין"

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "ממשק"

#: standalone/drakconnect:116 standalone/printerdrake:218
#: standalone/printerdrake:225
#, c-format
msgid "State"
msgstr "מצב"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr ""

#: standalone/drakconnect:135
#, c-format
msgid "Configure hostname..."
msgstr "הגדרת שם המארח"

#: standalone/drakconnect:149 standalone/drakconnect:843
#, c-format
msgid "LAN configuration"
msgstr "הגדרת רשת מקומית"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "הגדרת רשת מקומית"

#: standalone/drakconnect:162 standalone/drakconnect:246
#: standalone/drakconnect:250
#, c-format
msgid "Apply"
msgstr "החל"

#: standalone/drakconnect:197
#, c-format
msgid "Manage connections"
msgstr "ניהול חיבורים"

#: standalone/drakconnect:224
#, c-format
msgid "Device selected"
msgstr "התקן נבחר"

#: standalone/drakconnect:305
#, c-format
msgid "IP configuration"
msgstr "הגדרת IP"

#: standalone/drakconnect:342
#, c-format
msgid "DNS servers"
msgstr "שרתי DNS"

#: standalone/drakconnect:350
#, c-format
msgid "Search Domain"
msgstr "מתחם חיפוש"

#: standalone/drakconnect:358
#, c-format
msgid "static"
msgstr "סטטי"

#: standalone/drakconnect:358
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:436
#, c-format
msgid "Metric"
msgstr ""

#: standalone/drakconnect:491
#, c-format
msgid "Flow control"
msgstr "בקרת זרימה"

#: standalone/drakconnect:492
#, c-format
msgid "Line termination"
msgstr "סיום שורה"

#: standalone/drakconnect:503
#, c-format
msgid "Modem timeout"
msgstr "משך המתנה מקסימלי למודם"

#: standalone/drakconnect:507
#, c-format
msgid "Use lock file"
msgstr "השתמש בקובץ נעילה"

#: standalone/drakconnect:509
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:512
#, c-format
msgid "Busy wait"
msgstr "עסוק, נא להמתין"

#: standalone/drakconnect:517
#, c-format
msgid "Modem sound"
msgstr "צליל מודם"

#: standalone/drakconnect:518
#, c-format
msgid "Enable"
msgstr "אפשר"

#: standalone/drakconnect:518
#, c-format
msgid "Disable"
msgstr "נטרל"

#: standalone/drakconnect:569 standalone/harddrake2:45
#, c-format
msgid "Media class"
msgstr "סוג התקן"

#: standalone/drakconnect:570 standalone/drakfloppy:136
#, c-format
msgid "Module name"
msgstr "שם המודול"

#: standalone/drakconnect:571
#, c-format
msgid "Mac Address"
msgstr "כתובת Mac"

#: standalone/drakconnect:572 standalone/harddrake2:23
#: standalone/harddrake2:104
#, c-format
msgid "Bus"
msgstr "ערוץ"

#: standalone/drakconnect:573 standalone/harddrake2:29
#, c-format
msgid "Location on the bus"
msgstr "מיקום על הערוץ"

#: standalone/drakconnect:670 standalone/drakgw:250 standalone/drakpxe:138
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"לא נמצא מתאם רשת במערכת שלך.\n"
"עליך להריץ את אשף החומרה באם\n"
"קיים כרטיס רשת מותקן אך לא מזוהה."

#: standalone/drakconnect:678
#, c-format
msgid "Remove a network interface"
msgstr "הסרת ממשק רשת"

#: standalone/drakconnect:682
#, c-format
msgid "Select the network interface to remove:"
msgstr "עליך לבחור את ממשק הרשת שיש להסיר:"

#: standalone/drakconnect:713
#, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"חלה תקלה בעת ניסיון לזהות את ממשק הרשת \"%s\":\n"
"\n"
"%s"

#: standalone/drakconnect:715
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:732
#, c-format
msgid "No IP"
msgstr "אין IP"

#: standalone/drakconnect:733
#, c-format
msgid "No Mask"
msgstr "אין מסכה"

#: standalone/drakconnect:734 standalone/drakconnect:914
#, c-format
msgid "up"
msgstr "למעלה"

#: standalone/drakconnect:734 standalone/drakconnect:914
#, c-format
msgid "down"
msgstr "למטה"

#: standalone/drakconnect:777 standalone/net_monitor:468
#, c-format
msgid "Connected"
msgstr "מחובר"

#: standalone/drakconnect:777 standalone/net_monitor:468
#, c-format
msgid "Not connected"
msgstr "לא מחובר"

#: standalone/drakconnect:779
#, c-format
msgid "Disconnect..."
msgstr "מתנתק..."

#: standalone/drakconnect:779
#, c-format
msgid "Connect..."
msgstr "מתחבר..."

#: standalone/drakconnect:808
#, c-format
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr "אזהרה: זוהה חיבור אינטרנט נוסף, שיתכן ועושה שימוש ברשת שלך"

#: standalone/drakconnect:839
#, c-format
msgid "Deactivate now"
msgstr "לכבות עכשיו"

#: standalone/drakconnect:839
#, c-format
msgid "Activate now"
msgstr "הפעל עכשיו"

#: standalone/drakconnect:847
#, c-format
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: standalone/drakconnect:861
#, c-format
msgid "LAN Configuration"
msgstr "הגדרות רשת מקומית"

#: standalone/drakconnect:873
#, c-format
msgid "Adapter %s: %s"
msgstr "מתאם %s: %s"

#: standalone/drakconnect:882
#, c-format
msgid "Boot Protocol"
msgstr "פרוטוקול אתחול"

#: standalone/drakconnect:883
#, c-format
msgid "Started on boot"
msgstr "מופעל באתחול"

#: standalone/drakconnect:919
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrakelinux Control Center"
msgstr ""
"הממשק לא הוגדר עדיין.\n"
"עליך להפעיל את האשף \"הוספת ממשק\" ממרכז הבקרה של מנדרייק-לינוקס"

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:974 standalone/net_applet:46
#, c-format
msgid ""
"You don't have any configured Internet connection.\n"
"Run the \"Add Connection\" assistant from the Mandrakelinux Control Center"
msgstr ""
"החיבור לאינטרנט לא הוגדר עדיין.\n"
"עליך להפעיל את האשף \"הוספת חיבור\" ממרכז הבקרה של מנדרייק-לינוקס"

#: standalone/drakconnect:982
#, c-format
msgid "Internet connection configuration"
msgstr "הגדרת חיבור לאינטרנט"

#: standalone/drakconnect:1000
#, c-format
msgid "Third DNS server (optional)"
msgstr "שרת DNS שלישי (לא חובה)"

#: standalone/drakconnect:1022
#, c-format
msgid "Internet Connection Configuration"
msgstr "תצורת החיבור לאינטרנט"

#: standalone/drakconnect:1023
#, c-format
msgid "Internet access"
msgstr "גישה לאינטרנט"

#: standalone/drakconnect:1025 standalone/net_monitor:101
#, c-format
msgid "Connection type: "
msgstr "סוג חיבור: "

#: standalone/drakconnect:1028
#, c-format
msgid "Status:"
msgstr "מצב:"

#: standalone/drakedm:34
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr "מנהל ההפעלה של פרוייקט גנום"

#: standalone/drakedm:35
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr "מנהל ההפעלה של פרוייקט KDE"

#: standalone/drakedm:36
#, c-format
msgid "MdkKDM (Mandrakelinux Display Manager)"
msgstr "מנהל ההפעלה של מנדרייק-לינוקס MdkKDM"

#: standalone/drakedm:37
#, c-format
msgid "XDM (X Display Manager)"
msgstr "מנהל הפעלה XDM"

#: standalone/drakedm:55
#, c-format
msgid "Choosing a display manager"
msgstr "בחירת מנהל הפעלה"

#: standalone/drakedm:56
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"מנהל ההפעלה מאפשר לך להתחבר לחשבון המשתמש שלך\n"
"לאחר הפעלת המנשק הגרפי. כמו כן מנהל ההפעלה יאפשר\n"
"לך להתחבר למספר סביבות עבודה גרפיות בו זמנית."

#: standalone/drakedm:79
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "השינוי נעשה. האם אתה רוצה לאתחל את שירות dm (מנהל כניסה)?"

#: standalone/drakedm:80
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfloppy:41
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:78
#, c-format
msgid "Boot disk creation"
msgstr "יצירת תקליטון הפעלה"

#: standalone/drakfloppy:79
#, c-format
msgid "General"
msgstr "כללי"

#: standalone/drakfloppy:82 standalone/harddrake2:131
#, c-format
msgid "Device"
msgstr "התקן"

#: standalone/drakfloppy:88
#, c-format
msgid "Kernel version"
msgstr "גרסת גרעין:"

#: standalone/drakfloppy:103
#, c-format
msgid "Preferences"
msgstr "העדפות"

#: standalone/drakfloppy:117
#, c-format
msgid "Advanced preferences"
msgstr "מאפיינים מתקדמים"

#: standalone/drakfloppy:136
#, c-format
msgid "Size"
msgstr "גודל"

#: standalone/drakfloppy:139
#, c-format
msgid "Mkinitrd optional arguments"
msgstr "משתני בחירה עבור mkinitrd"

#: standalone/drakfloppy:141
#, c-format
msgid "force"
msgstr "הכרח/י"

#: standalone/drakfloppy:142
#, c-format
msgid "omit raid modules"
msgstr "וותר על מודולים של RAID"

#: standalone/drakfloppy:143
#, c-format
msgid "if needed"
msgstr "אם נדרש"

#: standalone/drakfloppy:144
#, c-format
msgid "omit scsi modules"
msgstr "וותר על מודולים של SCSI"

#: standalone/drakfloppy:147
#, c-format
msgid "Add a module"
msgstr "הוספת מודול"

#: standalone/drakfloppy:156
#, c-format
msgid "Remove a module"
msgstr "הסרת מודול"

#: standalone/drakfloppy:291
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "נא לבדוק שיש מדיה בהתקן %s"

#: standalone/drakfloppy:297
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr "אין מדיה, או ההתקן מוגן לכתיבה עבור %s."

#: standalone/drakfloppy:301
#, c-format
msgid "Unable to fork: %s"
msgstr "לא יכול להריץ %s"

#: standalone/drakfloppy:304
#, c-format
msgid "Floppy creation completed"
msgstr "יצירת תקליטון הסתיימה"

#: standalone/drakfloppy:304
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/drakfloppy:309
#, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"לא יכול לסגור כהלכה את mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "חפש גופנים מותקנים"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr ""

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr ""

#: standalone/drakfont:210
#, c-format
msgid "No fonts found"
msgstr "לא נמצאו גופנים"

#: standalone/drakfont:218 standalone/drakfont:258 standalone/drakfont:325
#: standalone/drakfont:358 standalone/drakfont:366 standalone/drakfont:392
#: standalone/drakfont:410 standalone/drakfont:424
#, c-format
msgid "done"
msgstr ""

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:256
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:259
#, c-format
msgid "Could not find any font.\n"
msgstr "לא נמצא שום גופן.\n"

#: standalone/drakfont:269
#, c-format
msgid "Search for fonts in installed list"
msgstr "חיפוש אחר גופנים מותקנים"

#: standalone/drakfont:294
#, c-format
msgid "%s fonts conversion"
msgstr ""

#: standalone/drakfont:323
#, c-format
msgid "Fonts copy"
msgstr "העתקת גופנים"

#: standalone/drakfont:326
#, c-format
msgid "True Type fonts installation"
msgstr "התקנת גופנים מסוג TTF"

#: standalone/drakfont:333
#, c-format
msgid "please wait during ttmkfdir..."
msgstr ""

#: standalone/drakfont:334
#, c-format
msgid "True Type install done"
msgstr "התקנה של TrueType הסתיימה"

#: standalone/drakfont:340 standalone/drakfont:355
#, c-format
msgid "type1inst building"
msgstr "בניית type1inst "

#: standalone/drakfont:349
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:359
#, c-format
msgid "Suppress Temporary Files"
msgstr ""

#: standalone/drakfont:362
#, c-format
msgid "Restart XFS"
msgstr ""

#: standalone/drakfont:408 standalone/drakfont:418
#, c-format
msgid "Suppress Fonts Files"
msgstr ""

#: standalone/drakfont:420
#, c-format
msgid "xfs restart"
msgstr "אתחול מחדש של שרת הגופנים XFS"

#: standalone/drakfont:428
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"לפני התקנת גופנים, עלייך לוודא שבאפשרותך להתקין\n"
"ולהשתמש בהם בהתאם לתנאי הרישוי שלהם.\n"
"\n"
"באפשרותך להתקין את הגופנים בדרך הרגילה. במקרים\n"
"נדירים גופנים פגומים עלולים לגרום לממשק הגרפי להיתקע."

#: standalone/drakfont:477 standalone/drakfont:486
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:487
#, c-format
msgid "Font List"
msgstr "רשימת גופנים"

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "אודות"

#: standalone/drakfont:495 standalone/drakfont:691 standalone/drakfont:729
#, c-format
msgid "Uninstall"
msgstr "ביטול התקנה"

#: standalone/drakfont:496
#, c-format
msgid "Import"
msgstr "ייבוא"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:514
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandrakesoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""

#: standalone/drakfont:523
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
"תוכנה זו היא תוכנה חופשית; מותר לך להפיצה מחדש ו/או לשנות אותה\n"
" על-פי תנאי הרישיון הציבורי הכללי של GNU כפי שפורסם על ידי\n"
"קרן התוכנה החופשית; בין אם גרסה 2 של הרישיון, ובין אם (לפי בחירתך)\n"
"כל גרסה מאוחרת שלו.\n"
"\n"
"\n"
"תוכנית זו מופצת בתקווה שתהיה מועילה,\n"
"אבל בלא אחריות כלשהי; ואפילו ללא האחריות המשתמעת בדבר\n"
"מסחריותה או התאמתה למטרה מסויימת. לפרטים נוספים, עליך לעיין\n"
"ברישיון הציבורי הכללי של GNU.\n"
"\n"
"\n"
"ביחד עם תוכנית זו היית אמור לקבל עותק של הרישיון הציבורי הכללי\n"
"של GNU; במידה שלא, עליך לכתוב ל Free Software Foundation, Inc.,\n"
" 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA."

#: standalone/drakfont:539
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:558
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "בחר את היישומים שיוכלו להשתמש בגופנים אלו:"

#: standalone/drakfont:559
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"לפני התקנת גופנים, עלייך לוודא שבאפשרותך להשתמש ולהתקין אותם על המערכת בהתאם "
"לתנאי הרישוי שלהם.\n"
"\n"
"באפשרותך להתקין את הגופנים בדרך הרגילה. במקרים נדירים גופנים עם בעיות עלולים "
"לגלום לבעיות בממשק הגרפי."

#: standalone/drakfont:569
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:570
#, c-format
msgid "StarOffice"
msgstr ""

#: standalone/drakfont:571
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:572
#, c-format
msgid "Generic Printers"
msgstr "מדפסות גנריות"

#: standalone/drakfont:588
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "נא לסמן את קובץ הגופן או ספריית הגופנים ולבחור \"הוספה\""

#: standalone/drakfont:589
#, c-format
msgid "File Selection"
msgstr "בחירת קובץ"

#: standalone/drakfont:604
#, c-format
msgid "You've not selected any font"
msgstr "שום גופן לא נבחר"

#: standalone/drakfont:656
#, c-format
msgid "Import fonts"
msgstr "ייבוא גופנים"

#: standalone/drakfont:661
#, c-format
msgid "Install fonts"
msgstr "התקנת גופנים"

#: standalone/drakfont:696
#, c-format
msgid "click here if you are sure."
msgstr "יש ללחוץ כאן כדי לאשר"

#: standalone/drakfont:698
#, c-format
msgid "here if no."
msgstr "כאן אם לא."

#: standalone/drakfont:737
#, c-format
msgid "Unselected All"
msgstr "בטל בחירת הכל"

#: standalone/drakfont:740
#, c-format
msgid "Selected All"
msgstr "בחר את הכל"

#: standalone/drakfont:743
#, c-format
msgid "Remove List"
msgstr "נקה את הרשימה"

#: standalone/drakfont:754 standalone/drakfont:773
#, c-format
msgid "Importing fonts"
msgstr "מייבא גופנים"

#: standalone/drakfont:758 standalone/drakfont:778
#, c-format
msgid "Initial tests"
msgstr "בדיקות ראשוניות"

#: standalone/drakfont:759
#, c-format
msgid "Copy fonts on your system"
msgstr "מעתיק גופנים למערכת שלך"

#: standalone/drakfont:760
#, c-format
msgid "Install & convert Fonts"
msgstr "התקנת והסבת גופנים"

#: standalone/drakfont:761
#, c-format
msgid "Post Install"
msgstr "אחרי ההתקנה"

#: standalone/drakfont:779
#, c-format
msgid "Remove fonts on your system"
msgstr "הסרת גופנים מהמערכת שלך"

#: standalone/drakfont:780
#, c-format
msgid "Post Uninstall"
msgstr "אחרי ההסרה"

#: standalone/drakgw:58 standalone/drakgw:194
#, c-format
msgid "Internet Connection Sharing"
msgstr "שיתוף חיבור אינטרנט"

#: standalone/drakgw:114 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "סליחה, קיימת תמיכה רק בגרעינים מסדרות 2.4 ומעלה בלבד."

#: standalone/drakgw:125
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "שיתוף חיבור אינטרנט כרגע מבוטל"

#: standalone/drakgw:126
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""

#: standalone/drakgw:130 standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "אפשר"

#: standalone/drakgw:130 standalone/drakgw:157 standalone/drakvpn:101
#: standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "הגדרה מחדש"

#: standalone/drakgw:130 standalone/drakgw:157 standalone/drakvpn:101
#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
#, c-format
msgid "dismiss"
msgstr "שחרור"

#: standalone/drakgw:137
#, c-format
msgid "Enabling servers..."
msgstr "מאפשר שרתים..."

#: standalone/drakgw:149
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "שיתוף חיבור לאינטרנט עכשיו מופעל"

#: standalone/drakgw:152
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "שיתוף אינטרנט כרגע מופעל"

#: standalone/drakgw:153
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"הגדרת שיתוף חיבור אינטרנט כבר\n"
"בוצעה קודם. השיתוף פעיל כעת.\n"
"\n"
"מה ברצונך לעשות?"

#: standalone/drakgw:157 standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "ניטרול"

#: standalone/drakgw:160
#, c-format
msgid "Disabling servers..."
msgstr "מבטל שרתים..."

#: standalone/drakgw:175
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "שיתוף חיבור אינטרנט מופסק כעת."

#: standalone/drakgw:195
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"אשף זה יעזור לך לשתף את חיבור האינטרנט של המחשב שלך.\n"
"תכונה זו מאפשרת למחשבים אחרים ברשת מקומית להשתמש\n"
"בחיבור לאינטרנט של מחשב זה.\n"
"\n"
"עליך לוודא שהגדרת חיבור לאינטרנט בעזרת אשף ההתחברות\n"
"קודם לכן.\n"
"\n"
"הערה: להגדרת רשת מקומית נדרש כרטיס רשת ייעודי."

#: standalone/drakgw:239
#, c-format
msgid "Interface %s (using module %s)"
msgstr ""

#: standalone/drakgw:240
#, c-format
msgid "Interface %s"
msgstr ""

#: standalone/drakgw:249 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "לא מותקן ממשק רשת מתאים במחשבך!"

#: standalone/drakgw:256
#, c-format
msgid "Network interface"
msgstr "ממשק רשת"

#: standalone/drakgw:257
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""

#: standalone/drakgw:263 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr ""

#: standalone/drakgw:264
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "נא לבחור את מתאם הרשת שיהיה מחובר אל הרשת המקומית שלך"

#: standalone/drakgw:293
#, c-format
msgid "Network interface already configured"
msgstr "ממשק הרשת כבר הוגדר"

#: standalone/drakgw:294
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: standalone/drakgw:299
#, c-format
msgid "Automatic reconfiguration"
msgstr ""

#: standalone/drakgw:299
#, c-format
msgid "No (experts only)"
msgstr ""

#: standalone/drakgw:300
#, c-format
msgid "Show current interface configuration"
msgstr "הראה את הגדרות המנשק הנוכחי"

#: standalone/drakgw:301
#, c-format
msgid "Current interface configuration"
msgstr "הגדרות המנשק הנוכחי"

#: standalone/drakgw:302
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"ההגדרות הנוכחיות של `%s':\n"
"\n"
"רשת: %s\n"
"כתובת IP: %s\n"
"שיוך IP: %s\n"
"התקן: %s"

#: standalone/drakgw:315
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
"for you.\n"
"\n"
msgstr ""
"באפשרותי לשמר את התצורה הנוכחית שלך ולהניח שכבר הגדרת שרת DHCP; אם כך הדבר "
"אנא ודא שקראתי נכונה את הרשת שבה אתה משתמש כרשת מקומית; אני לא יגדיר את זה "
"מחדש ולא ישנה את הגדרות שרת ה DHCP שלך.\n"
"\n"
"הגדרת ברירת המחדל ל DNS הוא Caching Nameserver מוגדר מאחורי firewall. \t"
"\t      \n"
"ולא, אני יכול להגדיר מחדש את הממשק שלך ולהגדיר(מחדש) שרת DHCP בשבילך.\n"
"\n"

#: standalone/drakgw:322
#, c-format
msgid "Local Network adress"
msgstr "כתובת רשת מקומית"

#: standalone/drakgw:326
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:330
#, c-format
msgid "(This) DHCP Server IP"
msgstr ""

#: standalone/drakgw:331
#, c-format
msgid "The DNS Server IP"
msgstr ""

#: standalone/drakgw:332
#, c-format
msgid "The internal domain name"
msgstr ""

#: standalone/drakgw:333
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:334
#, c-format
msgid "The DHCP end range"
msgstr "סוף תחום DHCP"

#: standalone/drakgw:335
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:336
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:337
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr ""

#: standalone/drakgw:344
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: standalone/drakgw:354
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "ישנו חשש להתנגשות כתובות LAN בתצורה הנוכחית של %s!\n"

#: standalone/drakgw:364
#, c-format
msgid "Configuring..."
msgstr "מגדיר...."

#: standalone/drakgw:365
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr ""

#: standalone/drakgw:405 standalone/drakpxe:231 standalone/drakvpn:278
#, c-format
msgid "Problems installing package %s"
msgstr "בעיות בזמן התקנת חבילה %s"

#: standalone/drakgw:601
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 Mandrakesoft.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:36
#, c-format
msgid "Mandrakelinux Help Center"
msgstr "מרכז הבקרה של מנדרייק-לינוקס"

#: standalone/drakhelp:36
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakhelp:42
#, c-format
msgid ""
"No browser is installed on your system, Please install one if you want to "
"browse the help system"
msgstr "לא מותקן דפדפן במערכת, נא להתקין אחד אם ברצונך לסייר במערכת העזרה"

#: standalone/drakperm:22
#, c-format
msgid "System settings"
msgstr "הגדרות מערכת"

#: standalone/drakperm:23
#, c-format
msgid "Custom settings"
msgstr "התאמה אישית"

#: standalone/drakperm:24
#, c-format
msgid "Custom & system settings"
msgstr "התאמה אישית והגדרות מערכת"

#: standalone/drakperm:44
#, c-format
msgid "Editable"
msgstr "ניתן לעריכה"

#: standalone/drakperm:49 standalone/drakperm:321
#, c-format
msgid "Path"
msgstr "נתיב"

#: standalone/drakperm:49 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "משתמש"

#: standalone/drakperm:49 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "קבוצה"

#: standalone/drakperm:49 standalone/drakperm:333
#, c-format
msgid "Permissions"
msgstr "הרשאות"

#: standalone/drakperm:107
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"כאן ביכולתך לראות קבצים בהם יש להשתמש בכדי\n"
"לתקן הרשאות, בעלים וקבוצות בעזרת msec.\n"
"יש באפשרותך גם לערוך חוקים משלך שידרסו את\n"
"חוקי ברירות המחדל."

#: standalone/drakperm:110
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""
"סף האבטחה הנוכחי הוא %s.\n"
"נא לבחור את ההרשאות להצגה או עריכה"

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr "למעלה"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr "העבר כלל נבחר שלב אחד למעלה"

#: standalone/drakperm:122
#, c-format
msgid "Down"
msgstr "מטה"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr "הזז את החוקים מטה שלב אחד"

#: standalone/drakperm:123
#, c-format
msgid "Add a rule"
msgstr "הוספת חוק"

#: standalone/drakperm:123
#, c-format
msgid "Add a new rule at the end"
msgstr "הוספה של חוק חדש בסוף"

#: standalone/drakperm:124
#, c-format
msgid "Delete selected rule"
msgstr "למחוק את הכלל הנבחר"

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakperm:125 standalone/drakups:298 standalone/drakups:358
#: standalone/drakups:378 standalone/drakvpn:333 standalone/drakvpn:694
#: standalone/printerdrake:239
#, c-format
msgid "Edit"
msgstr "עריכה"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr ""

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "סייר"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "משתמש"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "קבוצה"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "אחר"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "קריאה"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "כתוב"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "אפשר \"%s\" לכתיבה על הקובץ"

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "הפעלה"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "אפשר ל-\"%s\" להריץ את הקובץ"

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr ""

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"בשימוש עבור ספרייה:\n"
"רק הבעלים של הספרייה או הקובץ יכולים למחוק אותו."

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr ""

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr ""

#: standalone/drakperm:290 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "משתמש :"

#: standalone/drakperm:292
#, c-format
msgid "Group:"
msgstr "קבוצה :"

#: standalone/drakperm:296
#, c-format
msgid "Current user"
msgstr "משתמש נוכחי"

#: standalone/drakperm:297
#, c-format
msgid "When checked, owner and group won't be changed"
msgstr "כאשר מסומן, בעלים וקבוצה לא ישונו"

#: standalone/drakperm:307
#, c-format
msgid "Path selection"
msgstr "בחירת נתיב"

#: standalone/drakperm:327
#, c-format
msgid "Property"
msgstr "מאפיין"

#: standalone/drakpxe:55
#, c-format
msgid "PXE Server Configuration"
msgstr "הגדרת שרת PXE"

#: standalone/drakpxe:111
#, c-format
msgid "Installation Server Configuration"
msgstr "התקנת הגדרות שרת"

#: standalone/drakpxe:112
#, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP "
"server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable "
"using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""

#: standalone/drakpxe:143
#, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr ""

#: standalone/drakpxe:144
#, c-format
msgid "Interface %s (on network %s)"
msgstr "ממשק %s (על רשת %s)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given "
"range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr "כתובת ההתחלה של DHCP"

#: standalone/drakpxe:174
#, c-format
msgid "The DHCP end ip"
msgstr ""

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD "
"contents.\n"
"\n"
msgstr ""

#: standalone/drakpxe:192
#, c-format
msgid "Installation image directory"
msgstr ""

#: standalone/drakpxe:196
#, c-format
msgid "No image found"
msgstr ""

#: standalone/drakpxe:197
#, c-format
msgid ""
"No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""

#: standalone/drakpxe:215
#, c-format
msgid "Location of auto_install.cfg file"
msgstr ""

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr "מקומי"

#: standalone/draksec:53
#, c-format
msgid "Ignore"
msgstr "התעלם"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:101
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:154 standalone/harddrake2:184
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"תאור השדות:\n"
"\n"

#: standalone/draksec:168
#, c-format
msgid "(default value: %s)"
msgstr ""

#: standalone/draksec:210
#, c-format
msgid "Security Level:"
msgstr "סף אבטחה:"

#: standalone/draksec:217
#, c-format
msgid "Security Administrator:"
msgstr "מנהל אבטחה:"

#: standalone/draksec:219
#, c-format
msgid "Basic options"
msgstr "אפשרויות בסיסיות"

#: standalone/draksec:233
#, c-format
msgid "Network Options"
msgstr "אפשרויות רשת"

#: standalone/draksec:233
#, c-format
msgid "System Options"
msgstr "אפשרויות מערכת"

#: standalone/draksec:268
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:299
#, c-format
msgid "Please wait, setting security level..."
msgstr "נא להמתין, מגדיר תצורת אבטחה..."

#: standalone/draksec:305
#, c-format
msgid "Please wait, setting security options..."
msgstr "נא להמתין, מגדיר אפשרויות אבטחה..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "לא זוהה כרטיס קול!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"לא זוהה כרטיס קול במערכת שלך. נא לוודא שכרטיס קול תואם Linux נמצא במערכת "
"ומוכנס באופן נכון. \n"
"\n"
"אתה יכול לבקר ברשימת החומרה שלנו באתר: \n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"הערה: אם ברשותך כרטיס קול ISA PnP, עליך להשתמש בתכנית alsaconf או sndconfig. "
"פשוט הקלד \"sndconfig\" במסוף."

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: standalone/draksplash:68
#, c-format
msgid "first step creation"
msgstr "יצירת שלב ראשון"

#: standalone/draksplash:71
#, c-format
msgid "final resolution"
msgstr "רזולוציה סופית"

#: standalone/draksplash:72
#, c-format
msgid "choose image file"
msgstr "יש לבחור קובץ תמונה"

#: standalone/draksplash:73
#, c-format
msgid "Theme name"
msgstr "שם ערכת נושא"

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "סייר"

#: standalone/draksplash:93 standalone/draksplash:158
#, c-format
msgid "Configure bootsplash picture"
msgstr ""

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr ""

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr "קואורדינטת Y של תיבת טקסט במספר תווים"

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr "רוחב טקסט"

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr "גובה תיבת טקסט"

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr "קואורדינטת X של הפינה השמאלית עליונה של סרגל התקדמות"

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr "רוחב פס ההתקדמות"

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr "גובה סרגל התקדמות"

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr "צבע סרגל ההתקדמות"

#: standalone/draksplash:119
#, c-format
msgid "Preview"
msgstr "תצוגה מקדימה"

#: standalone/draksplash:121
#, c-format
msgid "Save theme"
msgstr "שמירת ערכת נושא"

#: standalone/draksplash:122
#, c-format
msgid "Choose color"
msgstr "יש לבחור צבע"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr "הצג סמל במסוף"

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr "הפוך הודעות גרעין לשקטות כברירת מחדל"

#: standalone/draksplash:161 standalone/draksplash:309
#: standalone/draksplash:454
#, c-format
msgid "Notice"
msgstr "לשים לב"

#: standalone/draksplash:161 standalone/draksplash:309
#, c-format
msgid "This theme does not yet have a bootsplash in %s!"
msgstr ""

#: standalone/draksplash:167
#, c-format
msgid "choose image"
msgstr "יש לבחור קובץ תמונה "

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:435
#, c-format
msgid "ProgressBar color selection"
msgstr "בחירת צבע פס ההתקדמות"

#: standalone/draksplash:454
#, c-format
msgid "You must choose an image file first!"
msgstr "יש לבחור קובץ תמונה קודם!"

#: standalone/draksplash:459
#, c-format
msgid "Generating preview..."
msgstr "תצוגה מקדימה..."

#. -PO:  First %s is theme name, second %s (in parenthesis) is resolution
#: standalone/draksplash:497
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/draksplash:503
#, c-format
msgid ""
"The image \"%s\" cannot be load due to the following issue:\n"
"\n"
"<span foreground=\"Red\">%s</span>"
msgstr ""

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, c-format
msgid "Add an UPS device"
msgstr ""

#: standalone/drakups:83
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"ברוך בואך לכלי הגדרות ה UPS.\n"
"\n"
"כאן יש באפשרותך להגדיר הוספת UPS חדש למערכת שלך.\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:93
#, c-format
msgid "Autodetection"
msgstr "זיהוי-אוטומטי"

#: standalone/drakups:101 standalone/harddrake2:211
#, c-format
msgid "Detection in progress"
msgstr "זיהוי בתהליך"

#: standalone/drakups:120 standalone/drakups:156 standalone/logdrake:449
#: standalone/logdrake:455
#, c-format
msgid "Congratulations"
msgstr "ברכותינו!"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, c-format
msgid "No new UPS devices was found"
msgstr "לא נמצאו התקני UPS חדשים"

#: standalone/drakups:128 standalone/drakups:140
#, c-format
msgid "UPS driver configuration"
msgstr "הגדרת מנהל התקן UPS"

#: standalone/drakups:128
#, c-format
msgid "Please select your UPS model."
msgstr "עליך לבחור את דגם ה UPS שלך."

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr "יצרן / דגם:"

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "שם:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr "שם ה UPS שלך"

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "יציאה:"

#: standalone/drakups:149
#, c-format
msgid "The port on which is connected your ups"
msgstr "היציאה אליה מחובר התקן ה UPS"

#: standalone/drakups:156
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:246
#, c-format
msgid "UPS devices"
msgstr "התקני UPS"

#: standalone/drakups:247 standalone/drakups:266 standalone/drakups:282
#: standalone/harddrake2:80 standalone/harddrake2:102
#, c-format
msgid "Name"
msgstr "שם"

#: standalone/drakups:265
#, c-format
msgid "UPS users"
msgstr "משתמשי UPS"

#: standalone/drakups:281
#, c-format
msgid "Access Control Lists"
msgstr "רשימות בקרת גישה"

#: standalone/drakups:282
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:294
#, c-format
msgid "Rules"
msgstr "חוקים"

#: standalone/drakups:295
#, c-format
msgid "Action"
msgstr "פעולה"

#: standalone/drakups:295 standalone/drakvpn:1146 standalone/harddrake2:77
#, c-format
msgid "Level"
msgstr "שלב"

#: standalone/drakups:295
#, c-format
msgid "ACL name"
msgstr "שם ACL"

#: standalone/drakups:325 standalone/drakups:329 standalone/drakups:338
#, c-format
msgid "DrakUPS"
msgstr ""

#: standalone/drakups:335
#, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "ברוך בואך לכלי הגדרת תצורת UPS"

#: standalone/drakvpn:73
#, c-format
msgid "DrakVPN"
msgstr ""

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr "חיבור VPN מאופשר כעת."

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"הגדרת חיבור ה VPN נעשתה זה מכבר.\n"
"\n"
"החיבור מאופשר כעת.\n"
"\n"
"מה ברצונך לעשות ?"

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr "מתנתק מה VPN..."

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr "חיבור ה VPN מנותק כעת."

#: standalone/drakvpn:121
#, c-format
msgid "VPN connection currently disabled"
msgstr "חיבור ה VPN מנוטרל כעת"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"הגדרת חיבור ה VPN נעשתה זה מכבר.\n"
"\n"
"החיבור מנוטרל כעת.\n"
"\n"
"מה ברצונך לעשות ?"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr "מתחבר ל VPN..."

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr "חיבור ל VPN מאופשר כעת."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr "הגדרת VPN פשוטה."

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, c-format
msgid "Kernel module."
msgstr "מודול גרעין."

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:292
#, c-format
msgid "Security Policies"
msgstr "מדיניות אבטחה"

#: standalone/drakvpn:292
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:295 standalone/drakvpn:306
#, c-format
msgid "Configuration file"
msgstr "קובץ הגדרות"

#: standalone/drakvpn:296
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:307
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:325 standalone/drakvpn:685
#, c-format
msgid "%s entries"
msgstr "%s כניסות"

#: standalone/drakvpn:326
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "מסך"

#: standalone/drakvpn:333 standalone/drakvpn:694
#, c-format
msgid "Commit"
msgstr "רישום"

#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
#: standalone/drakvpn:713
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "הגדרת מסך"

#: standalone/drakvpn:352
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:368
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:369
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:376
#, c-format
msgid "config setup"
msgstr "הגדרת תצורה"

#: standalone/drakvpn:376
#, c-format
msgid "conn %default"
msgstr "חיבור %default"

#: standalone/drakvpn:376
#, c-format
msgid "normal conn"
msgstr "חיבור רגיל"

#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
#, c-format
msgid "Exists!"
msgstr "קיים !"

#: standalone/drakvpn:383 standalone/drakvpn:424
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:400
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:405
#, c-format
msgid "interfaces"
msgstr "ממשקים"

#: standalone/drakvpn:406
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:409
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:410
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:444
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If don't define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:451
#, c-format
msgid "PFS"
msgstr "PFS"

#: standalone/drakvpn:452
#, c-format
msgid "keyingtries"
msgstr "keyingtries"

#: standalone/drakvpn:453
#, c-format
msgid "compress"
msgstr "compress"

#: standalone/drakvpn:454
#, c-format
msgid "disablearrivalcheck"
msgstr "disablearrivalcheck"

#: standalone/drakvpn:455 standalone/drakvpn:494
#, c-format
msgid "left"
msgstr "left"

#: standalone/drakvpn:456 standalone/drakvpn:495
#, c-format
msgid "leftcert"
msgstr "leftcert"

#: standalone/drakvpn:457 standalone/drakvpn:496
#, c-format
msgid "leftrsasigkey"
msgstr "leftrsasigkey"

#: standalone/drakvpn:458 standalone/drakvpn:497
#, c-format
msgid "leftsubnet"
msgstr "leftsubnet"

#: standalone/drakvpn:459 standalone/drakvpn:498
#, c-format
msgid "leftnexthop"
msgstr "leftnexthop"

#: standalone/drakvpn:488
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:491
#, c-format
msgid "section name"
msgstr "שם מקטע"

#: standalone/drakvpn:492
#, c-format
msgid "authby"
msgstr "authby"

#: standalone/drakvpn:493
#, c-format
msgid "auto"
msgstr "auto"

#: standalone/drakvpn:499
#, c-format
msgid "right"
msgstr "right"

#: standalone/drakvpn:500
#, c-format
msgid "rightcert"
msgstr "rightcert"

#: standalone/drakvpn:501
#, c-format
msgid "rightrsasigkey"
msgstr "rightrsasigkey"

#: standalone/drakvpn:502
#, c-format
msgid "rightsubnet"
msgstr "rightsubnet"

#: standalone/drakvpn:503
#, c-format
msgid "rightnexthop"
msgstr "rightnexthop"

#: standalone/drakvpn:511
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:543
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:576 standalone/drakvpn:826
#, c-format
msgid "Edit section"
msgstr "עריכת מקטע"

#: standalone/drakvpn:577
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
#: standalone/drakvpn:877
#, c-format
msgid "Section names"
msgstr "שמות מקטעים"

#: standalone/drakvpn:590
#, c-format
msgid "Can't edit!"
msgstr "לא יכול לערוך !"

#: standalone/drakvpn:591
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:600
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:611
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:624
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:645
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:656 standalone/drakvpn:873
#, c-format
msgid "Remove section"
msgstr "הסרת מקטע"

#: standalone/drakvpn:657 standalone/drakvpn:874
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:686
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:728
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:735
#, c-format
msgid "path"
msgstr "נתיב"

#: standalone/drakvpn:735
#, c-format
msgid "remote"
msgstr "מרוחק"

#: standalone/drakvpn:735
#, c-format
msgid "sainfo"
msgstr "sainfo"

#: standalone/drakvpn:743
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:746
#, c-format
msgid "path type"
msgstr "סוג נתיב"

#: standalone/drakvpn:750
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:770 standalone/drakvpn:863
#, c-format
msgid "real file"
msgstr "קובץ אמיתי"

#: standalone/drakvpn:793
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:810
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:827
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:838
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:847
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:855
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:862
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:903
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:923
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:924
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:941
#, c-format
msgid "Sainfo source protocol"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:956
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:957
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:974
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:991
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:996
#, c-format
msgid "Lifetime number"
msgstr "מספר Lifetime"

#: standalone/drakvpn:997
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1015
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1031 standalone/drakvpn:1116
#, c-format
msgid "Encryption algorithm"
msgstr "אלגוריתם הצפנה"

#: standalone/drakvpn:1033
#, c-format
msgid "Authentication algorithm"
msgstr "אלגוריתם אימות"

#: standalone/drakvpn:1035
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1036
#, c-format
msgid "deflate"
msgstr ""

#: standalone/drakvpn:1043
#, c-format
msgid "Remote"
msgstr "מרוחק"

#: standalone/drakvpn:1044
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1052
#, c-format
msgid "Exchange mode"
msgstr "שיטת תמסורת"

#: standalone/drakvpn:1054
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1060
#, c-format
msgid "Generate policy"
msgstr "יצירת מדיניות"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "off"
msgstr "מנותק"

#: standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
#, c-format
msgid "on"
msgstr "פעיל"

#: standalone/drakvpn:1062
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1076
#, c-format
msgid "Passive"
msgstr "פאסיבי"

#: standalone/drakvpn:1078
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1081
#, c-format
msgid "Certificate type"
msgstr "סוג האישור"

#: standalone/drakvpn:1083
#, c-format
msgid "My certfile"
msgstr "קובץ האישורים שלי"

#: standalone/drakvpn:1084
#, c-format
msgid "Name of the certificate"
msgstr "שם האישור"

#: standalone/drakvpn:1085
#, c-format
msgid "My private key"
msgstr "המפתח הפרטי שלי"

#: standalone/drakvpn:1086
#, c-format
msgid "Name of the private key"
msgstr "שם המפתח הפרטי"

#: standalone/drakvpn:1087
#, c-format
msgid "Peers certfile"
msgstr ""

#: standalone/drakvpn:1088
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1089
#, c-format
msgid "Verify cert"
msgstr "בדיקת אישור"

#: standalone/drakvpn:1091
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1093
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1094
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1114
#, c-format
msgid "Peers identifier"
msgstr ""

#: standalone/drakvpn:1115
#, c-format
msgid "Proposal"
msgstr "הצעה"

#: standalone/drakvpn:1117
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "שיטת אימות"

#: standalone/drakvpn:1126
#, c-format
msgid "DH group"
msgstr "קבוצת DH"

#: standalone/drakvpn:1133
#, c-format
msgid "Command"
msgstr "פקודה"

#: standalone/drakvpn:1134
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1135
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1136
#, c-format
msgid "Upper-layer protocol"
msgstr ""

#: standalone/drakvpn:1136 standalone/drakvpn:1143
#, c-format
msgid "any"
msgstr "כל אחד"

#: standalone/drakvpn:1138
#, c-format
msgid "Flag"
msgstr "דגל"

#: standalone/drakvpn:1139
#, c-format
msgid "Direction"
msgstr "כיוון"

#: standalone/drakvpn:1140
#, c-format
msgid "IPsec policy"
msgstr "מדיניות IPsec"

#: standalone/drakvpn:1140
#, c-format
msgid "ipsec"
msgstr "ipsec"

#: standalone/drakvpn:1140
#, c-format
msgid "discard"
msgstr "היפטר"

#: standalone/drakvpn:1143
#, c-format
msgid "Mode"
msgstr "אופן"

#: standalone/drakvpn:1143
#, c-format
msgid "tunnel"
msgstr "ערוץ"

#: standalone/drakvpn:1143
#, c-format
msgid "transport"
msgstr "מעביר"

#: standalone/drakvpn:1145
#, c-format
msgid "Source/destination"
msgstr "מקור/יעד"

#: standalone/drakvpn:1146
#, c-format
msgid "require"
msgstr "נדרש"

#: standalone/drakvpn:1146
#, c-format
msgid "default"
msgstr "ברירת מחדל"

#: standalone/drakvpn:1146
#, c-format
msgid "use"
msgstr "שימוש"

#: standalone/drakvpn:1146
#, c-format
msgid "unique"
msgstr "ייחודי"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "ארה\"ב (שידור)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "ארצות הברית (כבלים)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr "ארה\"ב (כבלים-hrc)"

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "קנדה (כבלים)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "יפן (שידור)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "יפן (כבלים)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "סין (שידור)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "אירופה המערבית"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "אירופה המזרחית"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "צרפת [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "ניו-זילנד"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr "Australian Optus cable TV"

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr ""

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "אזור:"

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr "מחפש ערוצי טלוויזיה..."

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr "מחפש ערוצי טלוויזיה"

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "ארעה שגיאה בזמן סריקת ערוצי טלוויזיה"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "יום טוב!"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "עכשיו, אפשר להריץ xawtv (תחת חלון גרפי!) !\n"

#: standalone/drakxtv:134
#, c-format
msgid "No TV Card detected!"
msgstr "לא זוהה כרטיס טלוויזיה!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:136
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"לא זוהה כרטיס טלויזיה במחשב זה. עליך לבדוק שכרטיס הטלויזיה מותקן ומתאים "
"לשימוש במערכות גנו/לינוקס.\n"
"\n"
"\n"
"באפשרותך לבדוק את תאימות הכרטיס במסד הנתונים המקוון של מנדרייק-לינוקס:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/harddrake2:20
#, c-format
msgid "Alternative drivers"
msgstr "התקנים חלופיים"

#: standalone/harddrake2:21
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "הרשימה של התקנים אלטרנטיביים לכרטיס קול הזה"

#: standalone/harddrake2:24
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "זה הערוץ הפיזי שאליו ההתקן מחובר (כמו PCI,USB ועוד...)"

#: standalone/harddrake2:26 standalone/harddrake2:130
#, c-format
msgid "Bus identification"
msgstr "זיהוי ערוץ"

#: standalone/harddrake2:27
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"התקני PCI ו-USB: רשימה זו מכילה את היצרן, יצרן משנה וזיהוי תת התקני PCI/USB "

#: standalone/harddrake2:30
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- התקני PCI:  זה נותן את חריץ ה-PCI, התקן ופונקציות של הכרטיס\n"
"- התקני EIDE: ההתקן הוא או האדון (master) או עבד(slave)\n"
"- התקני SCSI: ערוץ ה-SCSI והזיהוי התקן של ה-SCSI"

#: standalone/harddrake2:33
#, c-format
msgid "Drive capacity"
msgstr "קיבולת כונן"

#: standalone/harddrake2:33
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:34
#, c-format
msgid "this field describes the device"
msgstr "השדה הזה מכיל תיאור של ההתקן "

#: standalone/harddrake2:35
#, c-format
msgid "Old device file"
msgstr "קובץ התקן ישן"

#: standalone/harddrake2:36
#, c-format
msgid "old static device name used in dev package"
msgstr "שם ההתקן הסטטי הישן בשימוש ב-dev package"

#: standalone/harddrake2:37
#, c-format
msgid "New devfs device"
msgstr "התקן devfs חדש"

#: standalone/harddrake2:38
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "שם דינמי חדש מיותר על ידי הגרעין בעזרת devfs"

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:41
#, c-format
msgid "Module"
msgstr "מודול"

#: standalone/harddrake2:41
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "המודול של גרעין GNU/Linux שמטפל בהתקן"

#: standalone/harddrake2:42
#, c-format
msgid "Extended partitions"
msgstr "מחיצה מורחבת"

#: standalone/harddrake2:42
#, c-format
msgid "the number of extended partitions"
msgstr "מספר המחיצות המורחבות"

#: standalone/harddrake2:43
#, c-format
msgid "Geometry"
msgstr "גיאומטריה"

#: standalone/harddrake2:43
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:44
#, c-format
msgid "Disk controller"
msgstr "בקר דיסק"

#: standalone/harddrake2:44
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:45
#, c-format
msgid "class of hardware device"
msgstr "סוג התקן החומרה"

#: standalone/harddrake2:46 standalone/harddrake2:78
#: standalone/printerdrake:218
#, c-format
msgid "Model"
msgstr "דגם"

#: standalone/harddrake2:46
#, c-format
msgid "hard disk model"
msgstr "דגם כונן קשיח"

#: standalone/harddrake2:47
#, c-format
msgid "network printer port"
msgstr "יציאה לרשת של המדפסת"

#: standalone/harddrake2:48
#, c-format
msgid "Primary partitions"
msgstr "מחיצות ראשיות"

#: standalone/harddrake2:48
#, c-format
msgid "the number of the primary partitions"
msgstr "מספר המחיצות הראשיות"

#: standalone/harddrake2:49
#, c-format
msgid "the vendor name of the device"
msgstr "שם היצרן של ההתקן"

#: standalone/harddrake2:50
#, c-format
msgid "Bus PCI #"
msgstr "ערוץ PCI #"

#: standalone/harddrake2:50
#, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "ערוץ ה PCI שאליו ההתקן מחובר"

#: standalone/harddrake2:51
#, c-format
msgid "PCI device #"
msgstr "מספר התקן PCI"

#: standalone/harddrake2:51
#, c-format
msgid "PCI device number"
msgstr "מספר התקן PCI"

#: standalone/harddrake2:52
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:52
#, c-format
msgid "PCI function number"
msgstr "מספר פונקצית PCI"

#: standalone/harddrake2:53
#, c-format
msgid "Vendor ID"
msgstr "קוד יצרן"

#: standalone/harddrake2:53
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:54
#, c-format
msgid "Device ID"
msgstr "קוד התקן:"

#: standalone/harddrake2:54
#, c-format
msgid "this is the numerical identifier of the device"
msgstr "זהו קוד הזיהוי המספרי של ההתקן"

#: standalone/harddrake2:55
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:56
#, c-format
msgid "Sub device ID"
msgstr "קוד תת-התקן"

#: standalone/harddrake2:56
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "זהו תת-קוד הזיהוי המספרי של ההתקן"

#: standalone/harddrake2:57
#, c-format
msgid "Device USB ID"
msgstr "קוד USB של ההתקן"

#: standalone/harddrake2:57
#, c-format
msgid ".."
msgstr ".."

#: standalone/harddrake2:61
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:61
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"גרעין GNU/Linux צריכה להפעיל לולאה חישובית בזמן האתחול בכדי לזהות ספירת "
"שעון. התוצאה מאוחסנת בתור bogomips כדרך ל\"אבחון\" המעבד"

#: standalone/harddrake2:62
#, c-format
msgid "Cache size"
msgstr "גודל מטמון"

#: standalone/harddrake2:62
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "גודל מטמון המעבד (רמה שניה)"

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:65
#, c-format
msgid "Coma bug"
msgstr "באג תרדמת"

#: standalone/harddrake2:65
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "האם למעבד הזה יש את באג התרדמת של Cyrix 6x86?"

#: standalone/harddrake2:66
#, c-format
msgid "Cpuid family"
msgstr "משפחת Cpuid"

#: standalone/harddrake2:66
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "המשפחה של המעבד (למשל 6 למעבדי i686)"

#: standalone/harddrake2:67
#, c-format
msgid "Cpuid level"
msgstr "רמת CPUID"

#: standalone/harddrake2:67
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:68
#, c-format
msgid "Frequency (MHz)"
msgstr "תדירות (MHz)"

#: standalone/harddrake2:68
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:69
#, c-format
msgid "Flags"
msgstr "דגלים"

#: standalone/harddrake2:69
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "דגלי מעבד מדווחים על ידי הגרעין"

#: standalone/harddrake2:70
#, c-format
msgid "Fdiv bug"
msgstr "באג Fdiv"

#: standalone/harddrake2:71
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"לחלק ממעבדי הפנטיום הראשונים היא באג בחשובים של נקודה צפה המעבדים לא חישבו "
"בצורה נכונה חלק מהחישובים שתלוים בנקודה צפה Floating point DIVision (FDIV)"

#: standalone/harddrake2:72
#, c-format
msgid "Is FPU present"
msgstr "האם FPU נוכח"

#: standalone/harddrake2:72
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "כן אומר שלמעבד יש יחידת עיבוד מתמטית"

#: standalone/harddrake2:73
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "האם מעבד העזר המתמתטי תומך ב-IRQ וקטורי"

#: standalone/harddrake2:73
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "F00f bug"
msgstr "באג F00f"

#: standalone/harddrake2:74
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr "למעבדי פנטיום הראשונים היא באג שגרם להם לקפוא כאשר חישבו את הקוד F00F"

#: standalone/harddrake2:75
#, c-format
msgid "Halt bug"
msgstr "באג HALT"

#: standalone/harddrake2:76
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr "דור המעבד: (לדוגמה: 8 לפנטיום 3,...) "

#: standalone/harddrake2:79
#, c-format
msgid "Model name"
msgstr "שם דגם"

#: standalone/harddrake2:79
#, c-format
msgid "official vendor name of the cpu"
msgstr "שם המעבד הרשמי לפי היצרן"

#: standalone/harddrake2:80
#, c-format
msgid "the name of the CPU"
msgstr "שם המעבד הראשי"

#: standalone/harddrake2:81
#, c-format
msgid "Processor ID"
msgstr "מזהה מעבד"

#: standalone/harddrake2:81
#, c-format
msgid "the number of the processor"
msgstr "מספר המעבד"

#: standalone/harddrake2:82
#, c-format
msgid "Model stepping"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:83
#, c-format
msgid "the vendor name of the processor"
msgstr "שם היצרן של המעבד"

#: standalone/harddrake2:84
#, c-format
msgid "Write protection"
msgstr "הגנת כתיבה"

#: standalone/harddrake2:84
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "Floppy format"
msgstr "פרמוט תקליטון"

#: standalone/harddrake2:88
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:92
#, c-format
msgid "Channel"
msgstr "אפיק"

#: standalone/harddrake2:92
#, c-format
msgid "EIDE/SCSI channel"
msgstr "ערוץ EIDE/SCSI"

#: standalone/harddrake2:93
#, c-format
msgid "Disk identifier"
msgstr "מזהה דיסק"

#: standalone/harddrake2:93
#, c-format
msgid "usually the disk serial number"
msgstr "בדרך כלל המספר הסידורי של הכונן"

#: standalone/harddrake2:94
#, c-format
msgid "Logical unit number"
msgstr "מספר יחידה לוגית "

#: standalone/harddrake2:94
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#: standalone/harddrake2:99
#, c-format
msgid "Device file"
msgstr "קובץ התקן"

#: standalone/harddrake2:99
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr "קובץ ההתקן המשמש לתקשורת בין העכבר למנהל ההתקן בגרעין"

#: standalone/harddrake2:100
#, c-format
msgid "Emulated wheel"
msgstr "הדמיית גלגלת"

#: standalone/harddrake2:100
#, c-format
msgid "whether the wheel is emulated or not"
msgstr "עם הדמיית גלגלת או בלעדיה"

#: standalone/harddrake2:101
#, c-format
msgid "the type of the mouse"
msgstr "סוג העכבר"

#: standalone/harddrake2:102
#, c-format
msgid "the name of the mouse"
msgstr "שם העכבר"

#: standalone/harddrake2:103
#, c-format
msgid "Number of buttons"
msgstr "מספר כפתורים"

#: standalone/harddrake2:103
#, c-format
msgid "the number of buttons the mouse has"
msgstr "מספר המקשים שיש לעכבר"

#: standalone/harddrake2:104
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "סוג החיבור של העכבר"

#: standalone/harddrake2:105
#, c-format
msgid "Mouse protocol used by X11"
msgstr "פרוטוקול עכבר המשמש את X11"

#: standalone/harddrake2:105
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr "הפרוטוקול המשמש את שולחן העבודה לתקשורת עם העכבר"

#: standalone/harddrake2:112 standalone/harddrake2:121
#: standalone/harddrake2:128 standalone/harddrake2:136
#: standalone/harddrake2:309
#, c-format
msgid "Identification"
msgstr "זיהוי"

#: standalone/harddrake2:113 standalone/harddrake2:129
#, c-format
msgid "Connection"
msgstr "חיבור"

#: standalone/harddrake2:122
#, c-format
msgid "Performances"
msgstr "ביצועים"

#: standalone/harddrake2:123
#, c-format
msgid "Bugs"
msgstr "באגיםפס"

#: standalone/harddrake2:124
#, c-format
msgid "FPU"
msgstr "FPU"

#: standalone/harddrake2:132
#, c-format
msgid "Partitions"
msgstr "מחיצות"

#: standalone/harddrake2:137
#, c-format
msgid "Features"
msgstr "תכונות"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:158 standalone/logdrake:77
#: standalone/printerdrake:152 standalone/printerdrake:165
#, c-format
msgid "/_Options"
msgstr "/_אפשרויות"

#: standalone/harddrake2:159 standalone/harddrake2:180 standalone/logdrake:79
#: standalone/printerdrake:177 standalone/printerdrake:178
#: standalone/printerdrake:179 standalone/printerdrake:180
#, c-format
msgid "/_Help"
msgstr "/_עזרה"

#: standalone/harddrake2:163
#, c-format
msgid "/Autodetect _printers"
msgstr "/זיהוי _מדפסות אוטומטי"

#: standalone/harddrake2:164
#, c-format
msgid "/Autodetect _modems"
msgstr "/זיהוי אוטומטי של _מודמים"

#: standalone/harddrake2:165
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/זיהוי אוטומטי של כונני _jaz"

#: standalone/harddrake2:172 standalone/printerdrake:158
#, c-format
msgid "/_Quit"
msgstr "/_יציאה"

#: standalone/harddrake2:181
#, c-format
msgid "/_Fields description"
msgstr ""

#: standalone/harddrake2:183
#, c-format
msgid "Harddrake help"
msgstr "עזרת Harddrake "

#: standalone/harddrake2:192
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"ברגע שהתקן נבחר,ניתן לראות את המידע של ההתקן בשדות התצוגה במסגרת הימנית "
"(\"מידע\")"

#: standalone/harddrake2:197 standalone/printerdrake:179
#, c-format
msgid "/_Report Bug"
msgstr "/_דיווח באג"

#: standalone/harddrake2:198 standalone/printerdrake:180
#, c-format
msgid "/_About..."
msgstr "/_אודות..."

#: standalone/harddrake2:199
#, c-format
msgid "About Harddrake"
msgstr "אודות Harddrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:201
#, c-format
msgid ""
"This is HardDrake, a Mandrakelinux hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"אשף הגדרת החומרה HardDrake של מנדרייק-לינוקס.\n"
"<span foreground=\"royalblue3\">גרסה:</span> %s\n"
"<span foreground=\"royalblue3\">מפתח:</span> Thierry Vignaud &lt;"
"tvignaud@mandrakesoft.com&gt;\n"
"\n"

#: standalone/harddrake2:218
#, c-format
msgid "Harddrake2"
msgstr "HardDrake2"

#: standalone/harddrake2:234
#, c-format
msgid "Detected hardware"
msgstr "חומרה שזוהתה"

#: standalone/harddrake2:239
#, c-format
msgid "Configure module"
msgstr "הגדרת מודול"

#: standalone/harddrake2:246
#, c-format
msgid "Run config tool"
msgstr "הרצת כלי הגדרה"

#: standalone/harddrake2:296 standalone/net_monitor:108
#: standalone/net_monitor:109 standalone/net_monitor:114
#, c-format
msgid "unknown"
msgstr "לא ידוע"

#: standalone/harddrake2:297 standalone/printerdrake:308
#: standalone/printerdrake:346
#, c-format
msgid "Unknown"
msgstr "לא ידוע"

#: standalone/harddrake2:317
#, c-format
msgid "Misc"
msgstr "שונות"

#: standalone/harddrake2:332
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr "עליך לבחור התקן בחלון הימני בכדי להציג את המידע עבורו בחלון זה."

#: standalone/harddrake2:384
#, c-format
msgid "secondary"
msgstr "משני"

#: standalone/harddrake2:384
#, c-format
msgid "primary"
msgstr "ראשי"

#: standalone/harddrake2:388
#, c-format
msgid "burner"
msgstr "צורב"

#: standalone/harddrake2:388
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/keyboarddrake:25
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "עליך לבחור את פריסת המקלדת:"

#: standalone/keyboarddrake:34
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "האם ברצונך להשתמש במקש הBackSpace (->) כדי להחזיר מחיקה במסוף?"

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "ניהול שפה"

#: standalone/localedrake:67
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "השינוי הסתיים, אך כדי שיהיה בעל משמעות עליך לצאת"

#: standalone/logdrake:50
#, c-format
msgid "Mandrakelinux Tools Logs"
msgstr "כלי רישום של מנדרייק-לינוקס"

#: standalone/logdrake:51
#, c-format
msgid "Logdrake"
msgstr "Logdrake"

#: standalone/logdrake:64
#, c-format
msgid "Show only for the selected day"
msgstr "הראה רק את היום הנבחר"

#: standalone/logdrake:71
#, c-format
msgid "/File/_New"
msgstr "/קובץ/_חדש"

#: standalone/logdrake:71
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Open"
msgstr "/קובץ/_פתיחה"

#: standalone/logdrake:72
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Save"
msgstr "/קובץ/_שמירה"

#: standalone/logdrake:73
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:74
#, c-format
msgid "/File/Save _As"
msgstr "/קובץ/שמירה _בשם"

#: standalone/logdrake:75
#, c-format
msgid "/File/-"
msgstr "/קובץ/-"

#: standalone/logdrake:78
#, c-format
msgid "/Options/Test"
msgstr "/אפשרויות/בדיקה"

#: standalone/logdrake:80
#, c-format
msgid "/Help/_About..."
msgstr "/עזרה/_אודות..."

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr "אימות (auth/log)"

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr "משתמש (user.log)"

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr "הודעות (/var/log/messages)"

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr "הודעות מערכת (/var/log/syslog)"

#: standalone/logdrake:116
#, c-format
msgid "search"
msgstr "חיפוש"

#: standalone/logdrake:128
#, c-format
msgid "A tool to monitor your logs"
msgstr "כלי להצגת הרישום של המערכת"

#: standalone/logdrake:129 standalone/net_monitor:99
#, c-format
msgid "Settings"
msgstr "הגדרות"

#: standalone/logdrake:134
#, c-format
msgid "Matching"
msgstr "דומה ל"

#: standalone/logdrake:135
#, c-format
msgid "but not matching"
msgstr "אבל לא דומה ל"

#: standalone/logdrake:139
#, c-format
msgid "Choose file"
msgstr "יש לבחור קובץ רישום"

#: standalone/logdrake:148
#, c-format
msgid "Calendar"
msgstr "לוח שנה"

#: standalone/logdrake:158
#, c-format
msgid "Content of the file"
msgstr "תכולת הקובץ"

#: standalone/logdrake:162 standalone/logdrake:399
#, c-format
msgid "Mail alert"
msgstr "התראות דוא\"ל"

#: standalone/logdrake:169
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr "אשף האתראות נכשל בשגיאה לא צפוייה:"

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "נא להמתין, מנתח את הקובץ: %s"

#: standalone/logdrake:376
#, c-format
msgid "Apache World Wide Web Server"
msgstr "שרת WWW של APACHI"

#: standalone/logdrake:377
#, c-format
msgid "Domain Name Resolver"
msgstr ""

#: standalone/logdrake:378
#, c-format
msgid "Ftp Server"
msgstr "שרת FTP"

#: standalone/logdrake:379
#, c-format
msgid "Postfix Mail Server"
msgstr "שרת הדוא\"ל של Postfix"

#: standalone/logdrake:380
#, c-format
msgid "Samba Server"
msgstr "שרת Samba"

#: standalone/logdrake:382
#, c-format
msgid "Webmin Service"
msgstr "שירות Webmin"

#: standalone/logdrake:383
#, c-format
msgid "Xinetd Service"
msgstr "שירות Xinetd "

#: standalone/logdrake:394
#, c-format
msgid "Configure the mail alert system"
msgstr "הגדרת מערכת אתראות בדוא\"ל"

#: standalone/logdrake:395
#, c-format
msgid "Stop the mail alert system"
msgstr "הפסקת מערכת התראות בדוא\"ל"

#: standalone/logdrake:402
#, c-format
msgid "Mail alert configuration"
msgstr "תצורת התראות דוא\"ל"

#: standalone/logdrake:403
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"ברוך בואך לכלי הגדרות הדוא\"ל.\n"
"\n"
"כאן יש באפשרותך להגדיר את מערכת ההתראות.\n"

#: standalone/logdrake:406
#, c-format
msgid "What do you want to do?"
msgstr "מה ברצונך לעשות?"

#: standalone/logdrake:413
#, c-format
msgid "Services settings"
msgstr "הגדרת שרותים:"

#: standalone/logdrake:414
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr "התראה תשלח באם אחד מהשרותים האלו הפסיק לפעול"

#: standalone/logdrake:421
#, c-format
msgid "Load setting"
msgstr "הגדרת עומסים:"

#: standalone/logdrake:422
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "התראה תשלח באם העומס על המערכת גבוה מהערך הזה"

#: standalone/logdrake:423
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr "עומס"

#: standalone/logdrake:428
#, c-format
msgid "Alert configuration"
msgstr "הגדרת התראות:"

#: standalone/logdrake:429
#, c-format
msgid "Please enter your email address below "
msgstr "עליך להגדיר את כתובת הדוא\"ל למשלוח אתראות,"

#: standalone/logdrake:430
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr "ואת השם (או כתובת ה IP) של שרת ה SMTP שבו ברצונך להשתמש:"

#: standalone/logdrake:449
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr "האשף הגדיר בהצלחה את התראות הדואר."

#: standalone/logdrake:455
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr "האשף הצליח לנטרל את התראות הדואר."

#: standalone/logdrake:514
#, c-format
msgid "Save as.."
msgstr "שמירה בשם..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "עליך לבחור את סוג העכבר שלך:"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "האם לדמות כפתור שלישי?"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "בדיקת העכבר"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "נא לבדוק את העכבר:"

#: standalone/net_applet:30
#, c-format
msgid "Network is up on interface %s"
msgstr "הרשת פעילה בממשק %s"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:38
#, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "הרשת לא פעילה דרך הממשק %s. עליך לבחור ב\"הגדרת רשת\""

#: standalone/net_applet:53 standalone/net_monitor:471
#, c-format
msgid "Connect %s"
msgstr "מחבר %s"

#: standalone/net_applet:54 standalone/net_monitor:471
#, c-format
msgid "Disconnect %s"
msgstr "מנתק %s"

#: standalone/net_applet:55
#, c-format
msgid "Monitor Network"
msgstr "ניטור הרשת"

#: standalone/net_applet:56
#, c-format
msgid "Configure Network"
msgstr "הגדרת הרשת"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/net_applet:57 standalone/printerdrake:245
#, c-format
msgid "Refresh"
msgstr "רענן"

#: standalone/net_applet:58
#, c-format
msgid "Get Online Help"
msgstr "קבלת עזרה מקוונת"

#: standalone/net_applet:158
#, c-format
msgid "Always launch on startup"
msgstr "הפעל תמיד באתחול המערכת"

#: standalone/net_monitor:61 standalone/net_monitor:66
#, c-format
msgid "Network Monitoring"
msgstr "תצוגת מצב רשת"

#: standalone/net_monitor:104
#, c-format
msgid "Global statistics"
msgstr "סטטיסטיקה כלליות"

#: standalone/net_monitor:107
#, c-format
msgid "Instantaneous"
msgstr "מיידי"

#: standalone/net_monitor:107
#, c-format
msgid "Average"
msgstr "ממוצע"

#: standalone/net_monitor:108
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""
"מהירות\n"
"שליחה:"

#: standalone/net_monitor:109
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""
"מהירות\n"
"קבלה:"

#: standalone/net_monitor:113
#, c-format
msgid ""
"Connection\n"
"time: "
msgstr ""
"זמן\n"
"חיבור: "

#: standalone/net_monitor:120
#, c-format
msgid "Use same scale for received and transmitted"
msgstr "שימוש באותו קנה מידה למידע מתקבל ונשלח"

#: standalone/net_monitor:139
#, c-format
msgid "Wait please, testing your connection..."
msgstr "נא להמתין, בזמן בדיקת החיבור שלך..."

#: standalone/net_monitor:188 standalone/net_monitor:201
#, c-format
msgid "Disconnecting from Internet "
msgstr "מתנתק מהאינטרנט"

#: standalone/net_monitor:188 standalone/net_monitor:201
#, c-format
msgid "Connecting to Internet "
msgstr "מתחבר לאינטרנט"

#: standalone/net_monitor:232
#, c-format
msgid "Disconnection from Internet failed."
msgstr "ההתנתקות מהאינטרנט נכשלה."

#: standalone/net_monitor:233
#, c-format
msgid "Disconnection from Internet complete."
msgstr "ההתנתקות מהאינטרנט הושלמה בהצלחה."

#: standalone/net_monitor:235
#, c-format
msgid "Connection complete."
msgstr "התחברות הושלמה."

#: standalone/net_monitor:236
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrakelinux Control Center."
msgstr ""
"התחברות נכשלה.\n"
"נא לבדוק את ההגדרות במרכז ההגדרות של Mandrake."

#: standalone/net_monitor:341
#, c-format
msgid "Color configuration"
msgstr "הגדרות צבע"

#: standalone/net_monitor:389 standalone/net_monitor:409
#, c-format
msgid "sent: "
msgstr "נשלחו:"

#: standalone/net_monitor:396 standalone/net_monitor:413
#, c-format
msgid "received: "
msgstr "התקבלו:"

#: standalone/net_monitor:403
#, c-format
msgid "average"
msgstr "ממוצע"

#: standalone/net_monitor:406
#, c-format
msgid "Local measure"
msgstr "מעקב"

#: standalone/net_monitor:464
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr "אזהרה, חיבור אינטרנט אחר זוהה, אולי משתמש ברשת שלך"

#: standalone/net_monitor:475
#, c-format
msgid "No internet connection configured"
msgstr "לא הוגדר חיבור לאינטרנט"

#: standalone/printerdrake:69
#, c-format
msgid "Loading printer configuration... Please wait"
msgstr "טוען הגדרות מדפסת... אנא המתן..."

#: standalone/printerdrake:85
#, c-format
msgid "Reading data of installed printers..."
msgstr "מחפש מדפסות חדשות... "

#: standalone/printerdrake:134
#, c-format
msgid "%s Printer Management Tool"
msgstr "כלי ניהול מדפסות %s"

#: standalone/printerdrake:148 standalone/printerdrake:149
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:159 standalone/printerdrake:160
#: standalone/printerdrake:164
#, c-format
msgid "/_Actions"
msgstr "/_פעולות"

#: standalone/printerdrake:148 standalone/printerdrake:160
#, c-format
msgid "/_Add Printer"
msgstr "/_ הוספת מדפסת"

#: standalone/printerdrake:149
#, c-format
msgid "/Set as _Default"
msgstr "/_קבע בתור ברירת מחדל"

#: standalone/printerdrake:150
#, c-format
msgid "/_Edit"
msgstr "/_עריכה"

#: standalone/printerdrake:151
#, c-format
msgid "/_Delete"
msgstr "/_מחיקה"

#: standalone/printerdrake:152
#, c-format
msgid "/_Expert mode"
msgstr "/_מצב מומחה"

#: standalone/printerdrake:157
#, c-format
msgid "/_Refresh"
msgstr "/_רענן"

#: standalone/printerdrake:164
#, c-format
msgid "/_Configure CUPS"
msgstr "/_הגדרות CUPS"

#: standalone/printerdrake:197
#, c-format
msgid "Search:"
msgstr "חיפוש:"

#: standalone/printerdrake:200
#, c-format
msgid "Apply filter"
msgstr "החל מסנן"

#: standalone/printerdrake:218 standalone/printerdrake:225
#, c-format
msgid "Def."
msgstr "Def."

#: standalone/printerdrake:218 standalone/printerdrake:225
#, c-format
msgid "Printer Name"
msgstr "שם המדפסת"

#: standalone/printerdrake:218
#, c-format
msgid "Connection Type"
msgstr "סוג חיבור"

#: standalone/printerdrake:225
#, c-format
msgid "Server Name"
msgstr "שם שרת"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:233
#, c-format
msgid "Add Printer"
msgstr "הוספת מדפסת"

#: standalone/printerdrake:233
#, c-format
msgid "Add a new printer to the system"
msgstr "הוספת מדפסת חדשה למערכת"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:236
#, c-format
msgid "Set as default"
msgstr "קבע בתור ברירת מחדל"

#: standalone/printerdrake:236
#, c-format
msgid "Set selected printer as the default printer"
msgstr "סימון מדפסת זאת בתור ברירת מחדל"

#: standalone/printerdrake:239
#, c-format
msgid "Edit selected printer"
msgstr "עריכת המדפסת הנבחרת"

#: standalone/printerdrake:242
#, c-format
msgid "Delete selected printer"
msgstr "למחוק את המדפסת הנבחרת"

#: standalone/printerdrake:245
#, c-format
msgid "Refresh the list"
msgstr "רענון הרשימה"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:248
#, c-format
msgid "Configure CUPS"
msgstr "תצורת CUPS"

#: standalone/printerdrake:248
#, c-format
msgid "Configure CUPS printing system"
msgstr "הגדרת מערכת הדפסה CUPS"

#: standalone/printerdrake:309 standalone/printerdrake:347
#, c-format
msgid "Enabled"
msgstr "מאופשר"

#: standalone/printerdrake:310 standalone/printerdrake:348
#, c-format
msgid "Disabled"
msgstr "מנוטרל"

#: standalone/printerdrake:572
#, c-format
msgid "Authors: "
msgstr "כותבים:"

#: standalone/printerdrake:578
#, c-format
msgid "Printer Management \n"
msgstr "ניהול מדפסות\n"

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"על מנת לאפשר שימוש בסורקים יש להתקין את חבילות SANE.\n"
"\n"
"האם ברצונך להתקין חבילות אלו?"

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr "פעולת אשף הגדרת הסורק הופסקה."

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
"לא יכול להתקין את החבליות הבסיסיות עבור תמיכה בסורק עם אשף הגדרת הסורק."

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "אשף הגדרת הסורק לא יופעל כעת."

#: standalone/scannerdrake:67 standalone/scannerdrake:460
#, c-format
msgid "Searching for configured scanners..."
msgstr "מחפש סורקים מוגדרים..."

#: standalone/scannerdrake:71 standalone/scannerdrake:464
#, c-format
msgid "Searching for new scanners..."
msgstr "מחפש סורקים חדשים..."

#: standalone/scannerdrake:79 standalone/scannerdrake:486
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr "יצירה מחדש של רשימת הסורקים המוגדרים ..."

#: standalone/scannerdrake:101 standalone/scannerdrake:142
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr "ה-%s לא נתמך בגרסה הנוכחית של %s."

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s נמצא ב%s, להגדיר אותו אוטומטית?"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s לא נמצא במאגר הנתונים של סורקים, רוצה להגדיר זאת לבד?"

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "יש לבחור דגם של סורק"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "זוהה דגם: %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "יציאה: %s"

#: standalone/scannerdrake:165 standalone/scannerdrake:179
#, c-format
msgid "Do not install firmware file"
msgstr "אל תתקין קובץ קושחה"

#: standalone/scannerdrake:169 standalone/scannerdrake:221
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr "יתכן וה%s שלך דורש את טעינת הקושחה בכל הפעלה."

#: standalone/scannerdrake:170 standalone/scannerdrake:222
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr "במקרה זה, יש באפשרותך להגדיר פעולה זו לביצוע אוטומטי."

#: standalone/scannerdrake:171 standalone/scannerdrake:225
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr "לשם כך, עליך לספק את קובץ הקושחה לסורק בכדי שהוא יותקן."

#: standalone/scannerdrake:172 standalone/scannerdrake:226
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""
"הקובץ אמור להמצא בתקליטון או התקליטור שצורף לקופסה בה נרכש הסורק, באתר הבית "
"של המפתח או במחיצת חלונות."

#: standalone/scannerdrake:174 standalone/scannerdrake:233
#, c-format
msgid "Install firmware file from"
msgstr "התקנת קובץ קושחה מ"

#: standalone/scannerdrake:194
#, c-format
msgid "Select firmware file"
msgstr "יש לבחור קובץ קושחה"

#: standalone/scannerdrake:197 standalone/scannerdrake:256
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr "קובץ הקושחה %s לא קיים או אינו קריא!"

#: standalone/scannerdrake:220
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr "יתכן שיש צורך לטעון את הקושחה של הסורק שלך בכל הפעלה."

#: standalone/scannerdrake:224
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""
"לצורך זה, עליך לספק את קובץ הקושחה עבור הסורק שלך בכדי שניתן יהיה להתקינו."

#: standalone/scannerdrake:227
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""
"אם כבר התקנת את קושחת הסורק שלך, יש באפשרותך לעדכן את הקושחה כעת אם ברשותך "
"קובץ קושחה חדש."

#: standalone/scannerdrake:229
#, c-format
msgid "Install firmware for the"
msgstr "התקנת קושחה עבור"

#: standalone/scannerdrake:252
#, c-format
msgid "Select firmware file for the %s"
msgstr "בחירת קובץ קושחה עבור %s"

#: standalone/scannerdrake:270
#, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "לא הצליחה התקנת קובץ קושחה עבור %s!"

#: standalone/scannerdrake:283
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr "קובץ הקושחה עבור ה %s שלך הותקן בהצלחה."

#: standalone/scannerdrake:293
#, c-format
msgid "The %s is unsupported"
msgstr "ה%s הזה לא נתמך"

#: standalone/scannerdrake:298
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"ה %s חייב להיות מוגדר על ידי printerdrake.\n"
"באפשרותך להפעיל את printerdrake ממרכז הבקרה %s במדור חומרה."

#: standalone/scannerdrake:302 standalone/scannerdrake:309
#: standalone/scannerdrake:339
#, c-format
msgid "Auto-detect available ports"
msgstr "זיהוי אוטומטית של יציאות זמינות"

#: standalone/scannerdrake:304 standalone/scannerdrake:350
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "נא לבחור את ההתקן שאליו ה-%s שלך מחובר"

#: standalone/scannerdrake:305
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(הודעה: יציאות טוריות לא יכולות להיות מזוהות אוטומטית)"

#: standalone/scannerdrake:307 standalone/scannerdrake:352
#, c-format
msgid "choose device"
msgstr "יש לבחור התקן"

#: standalone/scannerdrake:341
#, c-format
msgid "Searching for scanners..."
msgstr "מחפש סורקים חדשים ..."

#: standalone/scannerdrake:376
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"ה %s שלך הוגדר.\n"
"עכשיו באפשרותך לסרוק מסמכים בעזרת \"XSane\" או \"Kooka\" מכניסת מולטימדיה/"
"גרפיקה בתפריט היישומים."

#: standalone/scannerdrake:400
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"הסורקים הבאים\n"
"\n"
"%s\n"
"זמינים במערכת שלך.\n"

#: standalone/scannerdrake:401
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"הסורק הבא\n"
"\n"
"%s\n"
"זמין במערכת שלך.\n"

#: standalone/scannerdrake:404 standalone/scannerdrake:407
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "לא נמצאו סורקים זמינים במערכת שלך.\n"

#: standalone/scannerdrake:421
#, c-format
msgid "Search for new scanners"
msgstr "חיפוש סורקים חדשים"

#: standalone/scannerdrake:427
#, c-format
msgid "Add a scanner manually"
msgstr "הוספה ידנית של סורק"

#: standalone/scannerdrake:434
#, c-format
msgid "Install/Update firmware files"
msgstr "התקנת/עדכון קבצי קושחה"

#: standalone/scannerdrake:440
#, c-format
msgid "Scanner sharing"
msgstr "שיתוף סורק"

#: standalone/scannerdrake:499 standalone/scannerdrake:664
#, c-format
msgid "All remote machines"
msgstr "כל המכונות המרוחקות"

#: standalone/scannerdrake:511 standalone/scannerdrake:814
#, c-format
msgid "This machine"
msgstr "מערכת זו"

#: standalone/scannerdrake:551
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"כאן באפשרותך לבחור האם הסורקים המחוברים למחשב זה יהיו זמינים למחשבים "
"מרוחקים, וכמו כן ע\"י אילו מחשבים מרוחקים."

#: standalone/scannerdrake:552
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr "באפשרותך גם להחליט אם סורקים על מחשבים מרוחקים יהיו זמינים למחשב זה."

#: standalone/scannerdrake:555
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "הסורקים על מחשב זה זמינים למחשבים אחרים"

#: standalone/scannerdrake:557
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "סוגר את הרשת"

#: standalone/scannerdrake:571
#, c-format
msgid "Use scanners on remote computers"
msgstr "שימוש בסורקים תחת מחשבים מרוחקים"

#: standalone/scannerdrake:574
#, c-format
msgid "Use the scanners on hosts: "
msgstr "שימוש בסורקים אלה תחת המארחים:"

#: standalone/scannerdrake:601 standalone/scannerdrake:673
#: standalone/scannerdrake:823
#, c-format
msgid "Sharing of local scanners"
msgstr "שיתוף של סורקים מקומיים"

#: standalone/scannerdrake:602
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr "אלה המחשבים שבהם הסורקים שמחוברים מקומית אמורים להיות זמינים:"

#: standalone/scannerdrake:613 standalone/scannerdrake:763
#, c-format
msgid "Add host"
msgstr "הוספת מארח"

#: standalone/scannerdrake:619 standalone/scannerdrake:769
#, c-format
msgid "Edit selected host"
msgstr "ערוך מארח שנבחר"

#: standalone/scannerdrake:628 standalone/scannerdrake:778
#, c-format
msgid "Remove selected host"
msgstr "להסיר את המארח הנבחר"

#: standalone/scannerdrake:652 standalone/scannerdrake:660
#: standalone/scannerdrake:665 standalone/scannerdrake:711
#: standalone/scannerdrake:802 standalone/scannerdrake:810
#: standalone/scannerdrake:815 standalone/scannerdrake:861
#, c-format
msgid "Name/IP address of host:"
msgstr "שם/כתובת IP של המארח:"

#: standalone/scannerdrake:674 standalone/scannerdrake:824
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "יש לבחור מארח שבו הסורקים המקומיים יהיו זמינים:"

#: standalone/scannerdrake:685 standalone/scannerdrake:835
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "חובה עליך להכניס שם מארח או כתובת IP.\n"

#: standalone/scannerdrake:696 standalone/scannerdrake:846
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "המארח הזה כבר ברשימה, אי אפשר להוסיף אותו שוב.\n"

#: standalone/scannerdrake:751
#, c-format
msgid "Usage of remote scanners"
msgstr "שימוש בסורקים מרוחקים"

#: standalone/scannerdrake:752
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "אלה המחשבים שמהם המערכת תשתמש בסורקים:"

#: standalone/scannerdrake:909
#, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"על מנת לאפשר שיתוף סורק(ים) מקומי(ים) יש להתקין את saned.\n"
"\n"
"האם ברצונך להתקין חבילה זו?"

#: standalone/scannerdrake:913 standalone/scannerdrake:917
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "הסורק(ים) שלך לא יהיו זמינים ברשת."

#: standalone/service_harddrake:104
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "מספר התקני ברמת החומרה \"%s\" הוסרו:\n"

#: standalone/service_harddrake:105
#, c-format
msgid "- %s was removed\n"
msgstr "- %s הוסר\n"

#: standalone/service_harddrake:108
#, c-format
msgid "Some devices were added: %s\n"
msgstr "מספר התקנים נוספו: %s\n"

#: standalone/service_harddrake:109
#, c-format
msgid "- %s was added\n"
msgstr "- %s נוסף\n"

#: standalone/service_harddrake:199
#, c-format
msgid "Hardware probing in progress"
msgstr "תהליך בדיקת חומרה"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "האם ברצונך להפעיל את כלי ההגדרות המתאים?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "בחירת שפה"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "הסכם משתמש"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "הגדרת עכבר"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "זיהוי כונן קשיח"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "בחר סוג התקנה:"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "נא לבחור את המקלדת שלך"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "חלוקה למחיצות"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "פרמוט מחיצות"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "נא לבחור חבילות להתקנה"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "התקנת המערכת"

#: steps.pm:25
#, c-format
msgid "Root password"
msgstr "סיסמת מנהל (root)"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "הוספת משתמש(ים)"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "הגדרת הרשת"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "התקנת מנהל האתחול"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "הגדרת X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "הגדרת שרותים"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "התקנת עדכוני מערכת"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "יציאה מההתקנה"

#: ugtk2.pm:1122
#, c-format
msgid "Is this correct?"
msgstr "האם זה נכון?"

#: ugtk2.pm:1250
#, c-format
msgid "Expand Tree"
msgstr "פרוס עץ"

#: ugtk2.pm:1251
#, c-format
msgid "Collapse Tree"
msgstr "כווץ עץ"

#: ugtk2.pm:1252
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "החלף בין תצוגה שטוחה/סידור בקבוצות"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s לא מותקן\n"
"יש לבחור ב\"המשך\" להתקנה או \"סיום\" ליציאה"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "ההתקנה נכשלה"