# Translation file of Mandrake graphic install
# Copyright (C) 1999 Mandrakesoft
# Jos� Manuel Cambre <asforber@asforber.com>, 1999
# Jes�s Bravo �lvarez <jba@pobox.com>, 2000
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2000-01-10 01:09+0100\n"
"PO-Revision-Date: 2000-01-06 03:10+0100\n"
"Last-Translator: Jes�s Bravo �lvarez <jba@pobox.com>\n"
"Language-Team: Galician <gpul-traduccion@ceu.fi.udc.es>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../Xconfigurator.pm_.c:159
msgid "Graphic card"
msgstr "Tarxeta gr�fica"

#: ../Xconfigurator.pm_.c:159
msgid "Select a graphic card"
msgstr "Elixa unha tarxeta gr�fica"

#: ../Xconfigurator.pm_.c:160
msgid "Choose a X server"
msgstr "Elixa un servidor X"

#: ../Xconfigurator.pm_.c:160
msgid "X server"
msgstr "Servidor X"

#: ../Xconfigurator.pm_.c:181
msgid "Select the memory size of your graphic card"
msgstr "Seleccione a cantidade de memoria da sua tarxeta gr�fica"

#: ../Xconfigurator.pm_.c:203
msgid "Choose options for server"
msgstr "Escolla as opci�ns para o servidor"

#: ../Xconfigurator.pm_.c:221
msgid "Choose a monitor"
msgstr "Elixa o monitor"

#: ../Xconfigurator.pm_.c:221
msgid "Monitor"
msgstr "Monitor"

#: ../Xconfigurator.pm_.c:224
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Os dous par�metros cr�ticos son a frecuencia de recorrido vertical, que\n"
"indica a frecuencia coa que a pantalla enteira � refrescada, e m�is\n"
"importante a�nda � a frecuencia de sincronizaci�n horizontal, que � a\n"
"frecuencia das l��as de barrido horizontal.\n"
"\n"
"� MOI IMPORTANTE que non especifique un tipo de monitor cunha\n"
"frecuencia de sincronizaci�n superior � capacidade real do seu monitor:\n"
"pode da�a-lo seu monitor.\n"
"No caso de d�bida, elixa unha configuraci�n conservadora."

#: ../Xconfigurator.pm_.c:231
msgid "Horizontal refresh rate"
msgstr "Frecuencia de recorrido horizontal"

#: ../Xconfigurator.pm_.c:231
msgid "Vertical refresh rate"
msgstr "Frecuencia de recorrido vertical"

#: ../Xconfigurator.pm_.c:272
msgid "Monitor not configured"
msgstr "O monitor non est� configurado"

#: ../Xconfigurator.pm_.c:275
msgid "Graphic card not configured yet"
msgstr "A tarxeta gr�fica a�nda non est� configurada"

#: ../Xconfigurator.pm_.c:278
msgid "Resolutions not chosen yet"
msgstr "Resoluci�ns a�nda non elexidas"

#: ../Xconfigurator.pm_.c:289
msgid "Do you want to test the configuration?"
msgstr "�Desexa proba-la configuraci�n?"

#: ../Xconfigurator.pm_.c:293
msgid "Warning: testing is dangerous on this graphic card"
msgstr "Aviso: probar � perigoso nesta tarxeta gr�fica"

#: ../Xconfigurator.pm_.c:296
msgid "Test configuration"
msgstr "Proba-la configuraci�n"

#: ../Xconfigurator.pm_.c:334
msgid "An error occurred:"
msgstr "Ocorreu un erro:"

#: ../Xconfigurator.pm_.c:336
msgid ""
"\n"
"try changing some parameters"
msgstr ""
"\n"
"probe a trocar alg�ns par�metros"

#: ../Xconfigurator.pm_.c:358
#, c-format
msgid "(leaving in %d seconds)"
msgstr "(sa�ndo en %d segundos)"

#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
msgid "Is this correct?"
msgstr "�� isto correcto?"

#: ../Xconfigurator.pm_.c:370
msgid "An error occurred, try changing some parameters"
msgstr "Ocorreu un erro, intente trocar alg�ns par�metros"

#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
msgid "Automatic resolutions"
msgstr "Resoluci�ns autom�ticas"

#: ../Xconfigurator.pm_.c:379
msgid ""
"To find the available resolutions I will try different ones.\n"
"Your screen will blink...\n"
"You can switch if off if you want, you'll hear a beep when it's over"
msgstr ""
"Para atopa-las resoluci�ns dispo�ibles vanse probar varias.\n"
"A s�a pantalla vai palpebrexar...\n"
"Pode apagala se o desexa, escoitar� un pitido cando estea rematado"

#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
msgid "Resolution"
msgstr "Resoluci�n"

#: ../Xconfigurator.pm_.c:469
msgid "Choose resolution and color depth"
msgstr "Elixa a resoluci�n e a profundidade de cor"

#: ../Xconfigurator.pm_.c:477
msgid "Show all"
msgstr "Ver todo"

#: ../Xconfigurator.pm_.c:501
msgid "Resolutions"
msgstr "Resoluci�ns"

#: ../Xconfigurator.pm_.c:548
msgid ""
"I can try to find the available resolutions (eg: 800x600).\n"
"Sometimes, though, it may hang the machine.\n"
"Do you want to try?"
msgstr ""
"Podo tratar de atopa-las resoluci�ns dispo�ibles (ex. 800x600).\n"
"Non obstante, isto pode ocasionar que a m�quina se bloquee.\n"
"�Desexa intentalo?"

#: ../Xconfigurator.pm_.c:553
msgid ""
"No valid modes found\n"
"Try with another video card or monitor"
msgstr ""
"Ning�n modo v�lido atopado\n"
"Intente con outra tarxeta de video ou monitor"

#: ../Xconfigurator.pm_.c:772
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Elecci�n do tipo de teclado: %s\n"

#: ../Xconfigurator.pm_.c:773
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tipo de rato: %s\n"

#: ../Xconfigurator.pm_.c:774
#, c-format
msgid "Mouse device: %s\n"
msgstr "Dispositivo do rato: %s\n"

#: ../Xconfigurator.pm_.c:775
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../Xconfigurator.pm_.c:776
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frecuencia horizontal do monitor: %s\n"

#: ../Xconfigurator.pm_.c:777
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Frecuencia vertical do monitor: %s\n"

#: ../Xconfigurator.pm_.c:778
#, c-format
msgid "Graphic card: %s\n"
msgstr "Tarxeta gr�fica: %s\n"

#: ../Xconfigurator.pm_.c:779
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Memoria da tarxeta gr�fica: %s KB\n"

#: ../Xconfigurator.pm_.c:780
#, c-format
msgid "XFree86 server: %s\n"
msgstr "Servidor XFree86: %s\n"

#: ../Xconfigurator.pm_.c:794
msgid "Preparing X-Window configuration"
msgstr "Preparando a configuraci�n de X-Window"

#: ../Xconfigurator.pm_.c:808
msgid "Change Monitor"
msgstr "Troca-lo monitor"

#: ../Xconfigurator.pm_.c:809
msgid "Change Graphic card"
msgstr "Troca-la tarxeta gr�fica"

#: ../Xconfigurator.pm_.c:810
msgid "Change Server options"
msgstr "Troca-las opci�ns do servidor"

#: ../Xconfigurator.pm_.c:811
msgid "Change Resolution"
msgstr "Troca-la resoluci�n"

#: ../Xconfigurator.pm_.c:812
msgid "Automatical resolutions search"
msgstr "B�squeda autom�tica de resoluci�ns"

#: ../Xconfigurator.pm_.c:816
msgid "Show information"
msgstr "Amosar informaci�n"

#: ../Xconfigurator.pm_.c:817
msgid "Test again"
msgstr "Probar de novo"

#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
msgid "Quit"
msgstr "Sa�r"

#: ../Xconfigurator.pm_.c:822
msgid "What do you want to do?"
msgstr "�Qu� desexa facer?"

#: ../Xconfigurator.pm_.c:829
msgid "Forget the changes?"
msgstr "�Esquece-los trocos?"

#: ../Xconfigurator.pm_.c:845
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Por favor, entre de novo en %s para activa-los trocos"

#: ../Xconfigurator.pm_.c:861
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Por favor, saia e ent�n use Ctrl-Alt-BackSpace"

#: ../Xconfigurator.pm_.c:864
msgid "X at startup"
msgstr "Lanzar X11 � arrincar"

#: ../Xconfigurator.pm_.c:865
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"P�dese configura-lo seu ordenador para que lance autom�ticamente\n"
"as X � arrincar. �Desexa que se executen as X � reiniciar?"

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors (8 bits)"
msgstr "256 cores (8 bits)"

#: ../Xconfigurator_consts.pm_.c:5
msgid "32 thousand colors (15 bits)"
msgstr "32 mil cores (15 bits)"

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors (16 bits)"
msgstr "65 mil cores (16 bits)"

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors (24 bits)"
msgstr "16 mill�ns de cores (24 bits)"

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors (32 bits)"
msgstr "4 mil mill�ns de cores (32 bits)"

#: ../Xconfigurator_consts.pm_.c:96
msgid "256 kB"
msgstr "256 KB"

#: ../Xconfigurator_consts.pm_.c:97
msgid "512 kB"
msgstr "512 KB"

#: ../Xconfigurator_consts.pm_.c:98
msgid "1 MB"
msgstr "1 MB"

#: ../Xconfigurator_consts.pm_.c:99
msgid "2 MB"
msgstr "2 MB"

#: ../Xconfigurator_consts.pm_.c:100
msgid "4 MB"
msgstr "4 MB"

#: ../Xconfigurator_consts.pm_.c:101
msgid "8 MB"
msgstr "8 MB"

#: ../Xconfigurator_consts.pm_.c:102
msgid "16 MB or more"
msgstr "16 MB ou m�is"

#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "VGA est�ndar, 640x480 a 60 Hz"

#: ../Xconfigurator_consts.pm_.c:109
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super VGA, 800x600 a 56 Hz"

#: ../Xconfigurator_consts.pm_.c:110
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (no 800x600)"

#: ../Xconfigurator_consts.pm_.c:111
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"

#: ../Xconfigurator_consts.pm_.c:112
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Super VGA extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"

#: ../Xconfigurator_consts.pm_.c:113
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "SVGA non-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"

#: ../Xconfigurator_consts.pm_.c:114
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"

#: ../Xconfigurator_consts.pm_.c:115
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Monitor multi-frecuencia soportando 1280x1024 a 60 Hz"

#: ../Xconfigurator_consts.pm_.c:116
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Monitor multi-frecuencia soportando 1280x1024 a 74 Hz"

#: ../Xconfigurator_consts.pm_.c:117
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Monitor multi-frecuencia soportando 1280x1024 a 76 Hz"

#: ../Xconfigurator_consts.pm_.c:118
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Monitor soportando 1600x1200 a 70 Hz"

#: ../Xconfigurator_consts.pm_.c:119
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Monitor soportando 1600x1200 a 76 Hz"

#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
msgid "Create"
msgstr "Crear"

#: ../diskdrake.pm_.c:17
msgid "Unmount"
msgstr "Desmontar"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
msgid "Delete"
msgstr "Borrar"

#: ../diskdrake.pm_.c:18
msgid "Format"
msgstr "Formatar"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
msgid "Resize"
msgstr "Redimensionar"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
msgid "Type"
msgstr "Tipo"

#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
msgid "Mount point"
msgstr "Punto de montaxe"

#: ../diskdrake.pm_.c:33
msgid "Write /etc/fstab"
msgstr "Escribir /etc/fstab"

#: ../diskdrake.pm_.c:34
msgid "Toggle to expert mode"
msgstr "Trocar � modo experto"

#: ../diskdrake.pm_.c:35
msgid "Toggle to normal mode"
msgstr "Trocar � modo normal"

#: ../diskdrake.pm_.c:36
msgid "Restore from file"
msgstr "Restaurar a partir dun ficheiro"

#: ../diskdrake.pm_.c:37
msgid "Save in file"
msgstr "Gardar nun ficheiro"

#: ../diskdrake.pm_.c:38
msgid "Restore from floppy"
msgstr "Restaurar a partir dun disquete"

#: ../diskdrake.pm_.c:39
msgid "Save on floppy"
msgstr "Gardar nun disquete"

#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
msgid "Done"
msgstr "Feito"

#: ../diskdrake.pm_.c:43
msgid "Clear all"
msgstr "Borrar todas"

#: ../diskdrake.pm_.c:44
msgid "Format all"
msgstr "Formatar todas"

#: ../diskdrake.pm_.c:45
msgid "Auto allocate"
msgstr "Asignaci�n autom�tica"

#: ../diskdrake.pm_.c:48
msgid "All primary partitions are used"
msgstr "T�dalas partici�ns primarias est�n usadas"

#: ../diskdrake.pm_.c:48
msgid "I can't add any more partition"
msgstr "Non podo engadir m�is partici�ns"

#: ../diskdrake.pm_.c:48
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Para ter m�is partici�ns, por favor borre unha para poder crear unha "
"partici�n extendida"

#: ../diskdrake.pm_.c:51
#, fuzzy
msgid "Rescue partition table"
msgstr "Escribir t�boa de partici�n"

#: ../diskdrake.pm_.c:52
msgid "Undo"
msgstr "Re-Facer"

#: ../diskdrake.pm_.c:53
msgid "Write partition table"
msgstr "Escribir t�boa de partici�n"

#: ../diskdrake.pm_.c:54
msgid "Reload"
msgstr "Re-Cargar"

#: ../diskdrake.pm_.c:98
msgid "Empty"
msgstr "Valdeiro"

#: ../diskdrake.pm_.c:98
msgid "Ext2"
msgstr "Ext2"

#: ../diskdrake.pm_.c:98
msgid "FAT"
msgstr "FAT"

#: ../diskdrake.pm_.c:98
msgid "Other"
msgstr "Outros"

#: ../diskdrake.pm_.c:98
msgid "Swap"
msgstr "Intercambio"

#: ../diskdrake.pm_.c:104
msgid "Filesystem types:"
msgstr "Tipos de sist. de ficheiros:"

#: ../diskdrake.pm_.c:113
msgid "Details"
msgstr "Detalles"

#: ../diskdrake.pm_.c:127
msgid ""
"You have one big fat partition\n"
"(generally use by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vostede ten unha partici�n fat grande\n"
"(xeralmente usada por MicroSoft Dos/Windows).\n"
"Sux�reselle que primeiro a redimensione (prema\n"
"primeiro nela, e ent�n en \"Redimensionar\")"

#: ../diskdrake.pm_.c:132
msgid "Please make a backup of your data first"
msgstr "Por favor, faga primeiro unha copia de seguridade dos seus datos"

#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
#: ../diskdrake.pm_.c:487
msgid "Read carefully!"
msgstr "�Lea con cuidado!"

#: ../diskdrake.pm_.c:146
#, c-format
msgid "After %s partition %s,"
msgstr "Despois de %s a partici�n %s,"

#: ../diskdrake.pm_.c:146
msgid "all data on this partition will be lost"
msgstr "perderanse t�dolos datos desta partici�n"

#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
msgid "Error"
msgstr "Erro"

#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
msgid "Mount point: "
msgstr "Punto de montaxe: "

#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
msgid "Device: "
msgstr "Dispositivo: "

#: ../diskdrake.pm_.c:191
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Letra de unidade DOS: %s (aproximaci�n)\n"

#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
msgid "Type: "
msgstr "Tipo: "

#: ../diskdrake.pm_.c:193
#, c-format
msgid "Start: sector %s\n"
msgstr "Comezo: sector %s\n"

#: ../diskdrake.pm_.c:194
#, c-format
msgid "Size: %s MB"
msgstr "Tama�o: %s MB"

#: ../diskdrake.pm_.c:196
#, c-format
msgid ", %s sectors"
msgstr ", %s sectores"

#: ../diskdrake.pm_.c:198
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Cilindro %d a cilindro %d\n"

#: ../diskdrake.pm_.c:199
msgid "Formatted\n"
msgstr "Formatado\n"

#: ../diskdrake.pm_.c:200
msgid "Not formatted\n"
msgstr "Non formatado\n"

#: ../diskdrake.pm_.c:201
msgid "Mounted\n"
msgstr "Montado\n"

#: ../diskdrake.pm_.c:202
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../diskdrake.pm_.c:203
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partici�n de arrinque por omisi�n\n"
"    (para arrincar en MS-DOS, non para lilo)\n"

#: ../diskdrake.pm_.c:205
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"

#: ../diskdrake.pm_.c:206
#, c-format
msgid "Chunk size %s\n"
msgstr "Tama�o do bloque de datos %s\n"

#: ../diskdrake.pm_.c:207
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discos RAID %s\n"

#: ../diskdrake.pm_.c:224
msgid "Please click on a partition"
msgstr "Prema nunha partici�n"

#: ../diskdrake.pm_.c:229
#, c-format
msgid "Size: %d MB\n"
msgstr "Tama�o: %d MB\n"

#: ../diskdrake.pm_.c:230
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Xeometr�a: %s cilindros, %s testas, %s sectores\n"

#: ../diskdrake.pm_.c:232
#, c-format
msgid "on bus %d id %d\n"
msgstr "no bus %d id %d\n"

#: ../diskdrake.pm_.c:245
msgid "Mount"
msgstr "Montar"

#: ../diskdrake.pm_.c:246
msgid "Active"
msgstr "Activar"

#: ../diskdrake.pm_.c:247
msgid "Add to RAID"
msgstr "Engadir � RAID"

#: ../diskdrake.pm_.c:248
msgid "Remove from RAID"
msgstr "Quitar do RAID"

#: ../diskdrake.pm_.c:249
msgid "Modify RAID"
msgstr "Modifica-lo RAID"

#: ../diskdrake.pm_.c:256
msgid "Choose action"
msgstr "Escolla a acci�n"

#: ../diskdrake.pm_.c:349
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Disculpe, pero non se pode crea-lo directorio /boot tan lonxe no disco\n"
"(nun cilindro > 1024). Se vostede usa LILO, non vai funcionar, e se non o\n"
"usa, non necesita /boot"

#: ../diskdrake.pm_.c:353
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"A partici�n que escolleu para usar como ra�z (/) est� f�sicamente ubicada\n"
"despois do 1024� cilindro do disco duro, e non ten partici�n /boot.\n"
"Se pensa usar o selector de SO de arranque LILO, tome en conta de\n"
"engadir unha partici�n /boot"

#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
#, c-format
msgid "Use ``%s'' instead"
msgstr "Use ``%s'' no seu lugar"

#: ../diskdrake.pm_.c:375
msgid "Use ``Unmount'' first"
msgstr "Use ``Desmontar'' primeiro"

#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
msgid "changing type of"
msgstr "cambiando tipo de"

#: ../diskdrake.pm_.c:388
msgid "Continue anyway?"
msgstr "�Continuar de calquera xeito?"

#: ../diskdrake.pm_.c:393
msgid "Quit without saving"
msgstr "Sa�r sen gardar"

#: ../diskdrake.pm_.c:393
msgid "Quit without writing the partition table?"
msgstr "�Sa�r do programa sen garda-la t�boa de partici�ns?"

#: ../diskdrake.pm_.c:412
msgid "Change partition type"
msgstr "Trocar tipo de partici�n"

#: ../diskdrake.pm_.c:413
msgid "Which partition type do you want?"
msgstr "�Qu� tipo de partici�n desexa?"

#: ../diskdrake.pm_.c:429
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "�Onde desexa monta-lo dispositivo %s?"

#: ../diskdrake.pm_.c:451
msgid "formatting"
msgstr "formatar"

#: ../diskdrake.pm_.c:453
msgid "Formatting"
msgstr "Formatando"

#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
#, c-format
msgid "Formatting partition %s"
msgstr "Formatando a partici�n %s"

#: ../diskdrake.pm_.c:458
msgid "After formatting all partitions,"
msgstr "Logo de formatar t�dalas partici�ns,"

#: ../diskdrake.pm_.c:458
msgid "all data on these partitions will be lost"
msgstr "perderanse os datos nesas partici�ns"

#: ../diskdrake.pm_.c:468
msgid "Move"
msgstr "Desprazar"

#: ../diskdrake.pm_.c:469
msgid "Which disk do you want to move to?"
msgstr "�A que disco desexa desprazala?"

#: ../diskdrake.pm_.c:473
msgid "Sector"
msgstr "Sector"

#: ../diskdrake.pm_.c:474
msgid "Which sector do you want to move to?"
msgstr "�A que sector desexa desprazala?"

#: ../diskdrake.pm_.c:477
msgid "Moving"
msgstr "Desprazando"

#: ../diskdrake.pm_.c:477
msgid "Moving partition..."
msgstr "Desprazando partici�n..."

#: ../diskdrake.pm_.c:487
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "�Escribirase � disco a tabla de partici�n da unidade %s!"

#: ../diskdrake.pm_.c:489
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Necesita reinicia-lo equipo para que a modificaci�n sexa tomada en conta"

#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
msgid "Computing fat filesystem bounds"
msgstr "Calculando os l�mites do sistema de ficheiros fat"

#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
#: ../install_steps_gtk.pm_.c:255
msgid "Resizing"
msgstr "Redimensionando"

#: ../diskdrake.pm_.c:524
msgid "resizing"
msgstr "redimensionar"

#: ../diskdrake.pm_.c:534
msgid "Choose the new size"
msgstr "Escoller o tama�o novo"

#: ../diskdrake.pm_.c:534 ../install_steps_gtk.pm_.c:317
#: ../install_steps_gtk.pm_.c:361
msgid "MB"
msgstr "MB"

#: ../diskdrake.pm_.c:587
msgid "Create a new partition"
msgstr "Crear unha partici�n nova"

#: ../diskdrake.pm_.c:603
msgid "Start sector: "
msgstr "Sector de comezo: "

#: ../diskdrake.pm_.c:606
msgid "Size in MB: "
msgstr "Tama�o en MB: "

#: ../diskdrake.pm_.c:609
msgid "Filesystem type: "
msgstr "Tipo de sist. de ficheiros: "

#: ../diskdrake.pm_.c:611
msgid "Preference: "
msgstr "Preferencia: "

#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
msgid "Select file"
msgstr "Elixa un ficheiro"

#: ../diskdrake.pm_.c:664
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"A t�boa de partici�ns de socorro non ten\n"
"o mesmo tama�o.  �Desexa continuar igual?"

#: ../diskdrake.pm_.c:672
msgid "Warning"
msgstr "Advertencia"

#: ../diskdrake.pm_.c:673
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Inserte un disquete no lector\n"
"Perderanse t�dolos datos no disquete"

#: ../diskdrake.pm_.c:687
msgid "Trying to rescue partition table"
msgstr "Tratando de recupera-la t�boa de partici�ns"

#: ../diskdrake.pm_.c:698
msgid "device"
msgstr "dispositivo"

#: ../diskdrake.pm_.c:699
msgid "level"
msgstr "nivel"

#: ../diskdrake.pm_.c:700
msgid "chunk size"
msgstr "tama�o do bloque de datos"

#: ../diskdrake.pm_.c:712
msgid "Choose an existing RAID to add to"
msgstr "Escolla un dos RAID para engadirlle"

#: ../diskdrake.pm_.c:713
msgid "new"
msgstr "novo"

#: ../fs.pm_.c:67 ../fs.pm_.c:73
#, c-format
msgid "%s formatting of %s failed"
msgstr "O formato %s de %s fallou"

#: ../fs.pm_.c:93
#, c-format
msgid "don't know how to format %s in type %s"
msgstr "desco�ecido o xeito de formatar %s de tipo %s"

#: ../fs.pm_.c:106
msgid "nfs mount failed"
msgstr "montaxe de nfs fallou"

#: ../fs.pm_.c:123
msgid "mount failed: "
msgstr "mount fallou: "

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr "erro desmontando %s: %s"

#: ../fsedit.pm_.c:219
msgid "Mount points must begin with a leading /"
msgstr "Os puntos de montaxe deben comezar con /"

#: ../fsedit.pm_.c:222
#, c-format
msgid "There is already a partition with mount point %s"
msgstr "Xa existe unha partici�n con punto de montaxe %s"

#: ../fsedit.pm_.c:306
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Erro o abrir %s para escritura: %s"

#: ../fsedit.pm_.c:388
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Ocorreu un erro - non se atopou ning�n dispositivo v�lido para crear novos "
"sistemas de ficheiros. Verifique o seu equipo para ver a raz�n deste problema"

#: ../fsedit.pm_.c:403
msgid "You don't have any partitions!"
msgstr "�Non ten ningunha partici�n!"

#: ../help.pm_.c:7
msgid "Choose preferred language for install and system usage."
msgstr "Escolla o idioma para a instalaci�n e para o sistema."

#: ../help.pm_.c:10
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr "Escolla a disposici�n do teclado que corresponde � seu na lista"

#: ../help.pm_.c:13
msgid ""
"Choose \"Install\" if there are no previous versions of Linux\n"
"installed, or if you wish to use multiple distributions or versions.\n"
"\n"
"\n"
"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
"(Helios) or Gold 2000."
msgstr ""
"Elixa \"Instalaci�n\" se non hai ningunha versi�n de Linux anterior,\n"
"ou se desexa instalar m�is dunha distribuci�n ou versi�n.\n"
"\n"
"\n"
"Elixa \"Actualizaci�n\" se desexa actualizar a partir dunha versi�n\n"
"anterior de Linux Mandrake: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen),\n"
"6.0 (Venus), 6.1 (Helios) ou Gold 2000."

#: ../help.pm_.c:22
msgid ""
"Select:\n"
"\n"
"  - Recommended: If you have never installed Linux before.\n"
"\n"
"\n"
"  - Customized: If you are familiar with Linux, you will be able to \n"
"select the usage for the installed system between normal, development or\n"
"server. Choose \"Normal\" for a general purpose installation of your\n"
"computer. You may choose \"Development\" if you will be using the computer\n"
"primarily for software development, or choose \"Server\" if you wish to\n"
"install a general purpose server (for mail, printing...).\n"
"\n"
"\n"
"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
"a highly customized installation, this Install Class is for you. You will\n"
"be able to select the usage of your installed system as for \"Customized\"."
msgstr ""
"Escolla:\n"
"\n"
"  - Recomendado: Se non instalou nunca antes un sistema Linux.\n"
"\n"
"\n"
"  - Persoalizado: Se est� xa familiarizado con Linux, vostede ser� capaz\n"
"de escolle-lo uso do sistema entre normal, de desenrolo, ou servidor.\n"
"Escolla \"Normal\" para unha instalaci�n de prop�sito xeral. Vostede\n"
"pode escoller \"Desenrolo\" se vai usa-lo seu ordenador sobre todo para\n"
"desenrolar software, ou escolla \"Servidor\" se desexa instalar un\n"
"servidor de prop�sito xeral (para correo, impresoras...).\n"
"\n"
"\n"
"  - Experto: Se vostede se manexa con facilidade con GNU/Linux e quere\n"
"facer unha instalaci�n moi persoalizada, esta clase de instalaci�n � a\n"
"s�a. Vostede poder� escolle-lo uso do seu sistema coma en \"Persoalizado\"."

#: ../help.pm_.c:40
msgid ""
"DrakX will attempt at first to look for one or more PCI\n"
"SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
"to use, it will insert it (them)  automatically.\n"
"\n"
"\n"
"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
"doesn't know which driver to use for this card, or if you have no\n"
"SCSI adapters at all, you will then be prompted on whether you have\n"
"one or not. If you have none, answer \"No\". If you have one or more,\n"
"answer \"Yes\". A list of drivers will then pop up, from which you\n"
"will have to select one.\n"
"\n"
"\n"
"After you have selected the driver, DrakX will ask if you\n"
"want to specify options for it. First, try and let the driver\n"
"probe for the hardware: it usually works fine.\n"
"\n"
"\n"
"If not, do not forget the information on your hardware that you\n"
"could get from your documentation or from Windows (if you have it\n"
"on your system), as suggested by the installation guide. These\n"
"are the options you will need to provide to the driver."
msgstr ""
"DrakX tentar� primeiro atopa-lo(s) adaptador(es) SCSI en bus PCI.\n"
"Se o(s) atopa e sabe que controlador(es) usar, o(s) aplicar�\n"
"automaticamente.\n"
"\n"
"\n"
"Se o seu adaptador SCSI � ISA, ou se � PCI pero DrakX non sabe\n"
"que controlador usar para esa tarxeta, ou se non ten adaptadores SCSI,\n"
"preguntar�selle se ten adaptadores SCSI ou non. Se non ten ning�n\n"
"responda �Non�. Se ten un ou varios responda �Si�. Logo preguntaralle\n"
"que controlador quere que probe.\n"
"\n"
"\n"
"Nese caso preguntaralle si quere especificar as opci�ns a pasar\n"
"� controlador. Deixe primeiro que o programa probe por si mesmo, na\n"
"maior�a dos casos funciona ben.\n"
"\n"
"\n"
"Se non, non esqueza a informaci�n que pode obter da s�a documentaci�n\n"
"ou a partir de Windows (se o ten instalado no seu sitema), coma se\n"
"suxere na gu�a de instalaci�n. Eses son os par�metros que ter� que\n"
"lle dar � driver."

#: ../help.pm_.c:64
msgid ""
"At this point, you may choose what partition(s) to use to install\n"
"your Linux-Mandrake system if they have been already defined (from a\n"
"previous install of Linux or from another partitionning tool). In other\n"
"cases, hard drive partitions must be defined. This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use.\n"
"\n"
"\n"
"If you have to create new partitions, use \"Auto allocate\" to "
"automatically\n"
"create partitions for Linux. You can select the disk for partitionning by\n"
"clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"Two common partition are: the root partition (/), which is the starting\n"
"point of the filesystem's directory hierarchy, and /boot, which contains\n"
"all files necessary to start the operating system when the\n"
"computer is first turned on.\n"
"\n"
"\n"
"Because the effects of this process are usually irreversible, partitioning\n"
"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
"simplifies the process so that it need not be. Consult the documentation\n"
"and take your time before proceeding."
msgstr ""
"Neste punto, vostede pode escolle-la(s) partici�n(s) que desexa usar para\n"
"instala-lo seu sistema Linux-Mandrake, se xa foron definidas (por unha\n"
"instalaci�n anterior de Linux ou por outra utilidade de particionamento).\n"
"Noutros casos, deberanse defini-las partici�ns do disco duro. Esta "
"operaci�n\n"
"consiste en dividir l�xicamente a capacidade do disco duro en �reas "
"separadas\n"
"para o seu uso.\n"
"\n"
"\n"
"Se ten que crear novas partici�ns, use \"Asignaci�n autom�tica\" para crear\n"
"autom�ticamente as partici�ns para Linux. Pode escolle-lo disco que quere\n"
"particionar premendo en \"hda\" para a primeira unidade IDE, \"hdb\" para\n"
"a segunda, ou \"sda\" para a primeira unidade SCSI, e as� o resto.\n"
"\n"
"\n"
"D�as partici�ns habituais son: a partici�n ra�z (/), que � o punto inicial\n"
"da xerarqu�a de directorios do sistema de ficheiros, e /boot, que cont�n\n"
"t�dolos ficheiros necesarios para principa-lo sistema operativo cando se\n"
"acende o ordenador.\n"
"\n"
"\n"
"Xa que os efectos deste proceso son normalmente irreversibles, facer\n"
"partici�ns pode intimidar e po�er nervioso a un usuario non experimentado.\n"
"A utilidade DiskDrake simplifica o proceso para que o usuario non necesite\n"
"selo. Consulte a documentaci�n e t�mese o seu tempo antes de continuar."

#: ../help.pm_.c:90
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use (formatting meaning creating a filesystem). At this time, you may\n"
"wish to re-format some already existing partitions to erase the data\n"
"they contain. Note: it is not necessary to re-format pre-existing\n"
"partitions, particularly if they contain files or data you wish to keep.\n"
"Typically retained are /home and /usr/local."
msgstr ""
"As partici�ns rec�n creadas deben ser formatadas para que o sistema\n"
"poda usalas (formatar significa crear un sistema de ficheiros). Agora\n"
"tam�n pode formatar partici�ns creadas anteriormente e en uso, se desexa\n"
"borrar t�dolos datos que conten. Nota: non � necesario formatar as\n"
"partici�ns que xa existen, en particular se desexa conserva-los datos\n"
"que conten. T�picamente mant��ense /home e /usr/local."

#: ../help.pm_.c:98
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"\n"
"First you can select group of package to install or upgrade. After that\n"
"you can select more packages according to the total size you wish to\n"
"select.\n"
"\n"
"\n"
"If you are in expert mode, you can select packages individually.\n"
"Please note that some packages require the installation of others.\n"
"These are referred to as package dependencies. The packages you select,\n"
"and the packages they require will be automatically selected for\n"
"install. It is impossible to install a package without installing all\n"
"of its dependencies."
msgstr ""
"Agora vostede pode escolle-los programas que desexa instalar.\n"
"\n"
"\n"
"Primeiro poder� escolle-los grupos de paquetes a instalar ou actualizar.\n"
"Despois diso, poder� escoller m�is paquetes dependendo do tama�o total\n"
"que vostede queira.\n"
"\n"
"\n"
"Se vostede est� en modo experto, poder� escolle-los paquetes "
"inidivualmente.\n"
"Dec�tese de que alg�ns paquetes necesitan que outros estean instalados.\n"
"Isto ch�mase dependencias de paquetes. Os paquetes que escolla, e os\n"
"paquetes que necesitan ser�n autom�ticamente escollidos para instalar.\n"
"� imposible instalar un paquete sen instalar t�dalas s�as dependencias."

#: ../help.pm_.c:114
msgid ""
"The packages selected are now being installed. This operation\n"
"should take a few minutes unless you have chosen to upgrade an\n"
"existing system, in that case it can take more time even before\n"
"upgrade starts."
msgstr ""
"Os paquetes escollidos est�n agora a seren instalados. Esta\n"
"operaci�n deber�a levar alg�ns minutos, ag�s que vostede escollese\n"
"actualizar un sistema que xa existe, neste caso pode que lle leve\n"
"m�is tempo incluso antes de que a actualizaci�n comece."

#: ../help.pm_.c:120
msgid ""
"If DrakX failed to find your mouse, or if you want to\n"
"check what it has done, you will be presented the list of mice\n"
"above.\n"
"\n"
"\n"
"If you agree with DrakX' settings, just jump to the section\n"
"you want by clicking on it in the menu on the left. Otherwise,\n"
"choose a mouse type in the menu which you think is the closest\n"
"match for your mouse.\n"
"\n"
"\n"
"In case of a serial mouse, you will also have to tell DrakX\n"
"which serial port it is connected to."
msgstr ""
"Se DrakX non puido atopa-lo seu rato, ou se vostede quere\n"
"comprobar qu� � o que fixo, presentar�selle a lista de ratos\n"
"enriba.\n"
"\n"
"\n"
"Se vostede est� de acordo cos par�metros do DrakX, vaia �\n"
"seguinte secci�n que queira, premendo no men� da esquerda. Noutro\n"
"caso, escolla no men� un tipo de rato que vostede pense que � o\n"
"mellor para o seu.\n"
"\n"
"\n"
"No caso dun rato de porto serie, ter� que lle dicir � DrakX o\n"
"porto serie � que est� conectado."

#: ../help.pm_.c:135
msgid ""
"Please select the correct port. For example, the COM1 port in MS Windows\n"
"is named ttyS0 in Linux."
msgstr ""
"Por favor, escolla o porto correcto. Por exemplo, o porto COM1 en MS\n"
"Windows ch�mase ttyS0 en Linux."

#: ../help.pm_.c:139
msgid ""
"This section is dedicated to configuring a local area\n"
"network (LAN) or a modem.\n"
"\n"
"Choose \"Local LAN\" and DrakX will\n"
"try to find an Ethernet adapter on your machine. PCI adapters\n"
"should be found and initialized automatically.\n"
"However, if your peripheral is ISA, autodetection will not work,\n"
"and you will have to choose a driver from the list that will appear then.\n"
"\n"
"\n"
"As for SCSI adapters, you can let the driver probe for the adapter\n"
"in the first time, otherwise you will have to specify the options\n"
"to the driver that you will have fetched from documentation of your\n"
"hardware.\n"
"\n"
"\n"
"If you install a Linux-Mandrake system on a machine which is part\n"
"of an already existing network, the network administrator will\n"
"have given you all necessary information (IP address, network\n"
"submask or netmask for short, and hostname). If you're setting\n"
"up a private network at home for example, you should choose\n"
"addresses.\n"
"\n"
"\n"
"Choose \"Dialup with modem\" and the Internet connection with\n"
"a modem will be configured. DrakX will try to find your modem,\n"
"if it fails you will have to select the right serial port where\n"
"your modem is connected to."
msgstr ""
"Esta secci�n ad�case a configurar unha rede de �rea local (LAN)\n"
"ou un m�dem.\n"
"\n"
"Escolla \"Rede local\" e DrakX tentar� atopar un adaptador Ethernet\n"
"na s�a m�quina. Os adaptadores PCI deber�an ser atopados e inicializados\n"
"autom�ticamente. Nembargantes, se o seu perif�rico � ISA, a\n"
"autodetecci�n non funcionar�, e ter� que escoller un controlador\n"
"da lista que aparecer� ent�n.\n"
"\n"
"\n"
"Do mesmo xeito que para os adaptadores SCSI, vostede pode deixar que o\n"
"controlador probe o adaptador de primeiras, ou sen�n vostede ter� que\n"
"indica-las opci�ns � controlador que vostede ter� que obter da\n"
"documentaci�n do seu aparato.\n"
"\n"
"\n"
"Se instala un sistema Linux-Mandrake nunha m�quina que � parte dunha\n"
"rede que xa existe, o administrador da rede xa lle dar�a toda a\n"
"informaci�n necesaria (direcci�n IP, subm�scara ou simplemente m�scara\n"
"de rede, e o nome da m�quina). Se est� activando unha rede privada na\n"
"s�a casa, por exemplo, ter� que escolle-las direcci�ns.\n"
"\n"
"\n"
"Escolla \"Chamar cun m�dem\" e configurarase unha conexi�n a Internet\n"
"cun m�dem. DrakX tentar� atopa-lo seu m�dem, e se non pode, vostede ter�\n"
"que indica-lo porto serie correcto onde est� conectado o seu m�dem."

#: ../help.pm_.c:169
msgid ""
"Enter:\n"
"\n"
"  - IP address: if you don't know it, ask your network administrator or "
"ISP.\n"
"\n"
"\n"
"  - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
"sure, ask your network administrator or ISP.\n"
"\n"
"\n"
"  - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
"this option. If selected, no value is needed in \"IP address\". If you are\n"
"not sure, ask your network administrator or ISP.\n"
msgstr ""
"Introduza:\n"
"\n"
"  - Direcci�n IP: se non a co�ece, preg�ntelle � seu administrador de rede\n"
"ou ISP.\n"
"\n"
"\n"
"  - M�scara de Rede: \"255.255.255.0\" � normalmente unha boa elecci�n. Se\n"
"non est� seguro, pregunte � seu administrador de rede ou ISP.\n"
"\n"
"\n"
"  - IP autom�tica: Se a s�a rede usa o protocolo bootp ou dhcp, escolla\n"
"esta opci�n. Neste caso, non � necesario ning�n valor en \"Direcci�n IP\".\n"
"Se non est� seguro, pregunte � seu administrador de rede ou ISP.\n"

#: ../help.pm_.c:184
msgid ""
"You may now enter dialup options. If you're not sure what to enter, the\n"
"correct information can be obtained from your ISP."
msgstr ""
"Vostede pode agora introduci-las opci�ns de chamada. Se non est� seguro de\n"
"que escribir, a informaci�n correcta pode obtela do seu ISP."

#: ../help.pm_.c:188
msgid ""
"If you will use proxies, please configure them now. If you don't know if\n"
"you will use proxies, ask your network administrator or your ISP."
msgstr ""
"Se vai usar proxys, config�reos agora. Se non sabe se vai usar proxys,\n"
"pregunte � seu administrador de rede ou � seu ISP."

#: ../help.pm_.c:192
msgid ""
"You can install cryptographic package if your internet connection has been\n"
"set up correctly. First choose a mirror where you wish to download packages "
"and\n"
"after that select the packages to install.\n"
"\n"
"Note you have to select mirror and cryptographic packages according\n"
"to your legislation."
msgstr ""
"Pode instalar paquetes de criptograf�a se xa configurou a s�a conexi�n a\n"
"internet correctamente. Primeiro escolla un espello do que quere baixa-los\n"
"paquetes, e ent�n escolla os paquetes que desexa instalar.\n"
"\n"
"Perc�tese de que ten que escolle-lo espello e os paquetes criptogr�ficos\n"
"de acordo coa s�a lexislaci�n."

#: ../help.pm_.c:200
msgid ""
"You can now select your timezone according to where you live.\n"
"\n"
"\n"
"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
"in local time according to the time zone you have selected."
msgstr ""
"Agora pode escolle-la s�a zona horaria dependendo de onde viva.\n"
"\n"
"\n"
"Linux xestiona a hora en GMT ou \"Hora do Meridiano de Greenwich\", e a\n"
"traslada � hora local dependendo da zona que vostede escolla."

#: ../help.pm_.c:207
msgid "Help"
msgstr "Axuda"

#: ../help.pm_.c:210
msgid ""
"Linux can deal with many types of printer. Each of these\n"
"types require a different setup.\n"
"\n"
"\n"
"If your printer is directly connected to your computer, select\n"
"\"Local printer\". You will then have to tell which port your\n"
"printer is connected to, and select the appropriate filter.\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine,\n"
"you will have to select \"Remote lpd\". In order to make\n"
"it work, no username or password is required, but you will need\n"
"to know the name of the printing queue on this server.\n"
"\n"
"\n"
"If you want to access a SMB printer (which means, a printer located\n"
"on a remote Windows 9x/NT machine), you will have to specify its\n"
"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
"plus the username, workgroup and password required in order to\n"
"access the printer, and of course the name of the printer. The same goes\n"
"for a NetWare printer, except that you need no workgroup information."
msgstr ""
"Linux pode utilizar varios tipos de impresoras. Cada un deles\n"
"necesita unha configuraci�n diferente.\n"
"\n"
"\n"
"Se a s�a impresora est� conectada directamente � seu ordenador,\n"
"elixa �Impresora local�. Logo ter� que indicar o porto no que est�\n"
"conectada a s�a impresora, e escolle-lo filtro de impresi�n adecuado.\n"
"\n"
"\n"
"Se desexa acceder a unha impresora situada nunha m�quina Unix remota,\n"
"elixa �Impresora remota�. Para que poida utilizala non � necesario\n"
"un nome de usuario ou contrasinal, pero necesitar� sabe-lo nome da\n"
"cola de impresi�n no servidor de impresi�n remoto.\n"
"\n"
"\n"
"Se desexa acceder a unha impresora SMB (� dicir, a unha impresora conectada\n"
"a unha m�quina remota con Windows 9x/NT), deber� especifica-lo seu nome\n"
"SMB (que non � o seu nome TCP/IP), e posiblemente tam�n a s�a direcci�n IP,\n"
"as� como o nome de usuario, de grupo de traballo e a contrasinal necesarios\n"
"para acceder � impresora; e, por suposto, o nome da impresora mesma.\n"
"O mesmo serve para unha impresora Netware, ag�s que non necesita a\n"
"informaci�n sobre o grupo de traballo."

#: ../help.pm_.c:233
msgid ""
"You can now enter the root password for your Linux-Mandrake\n"
"system. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"\n"
"Root is the administrator of the system, and is the only user\n"
"allowed to modify the system configuration. Therefore, choose\n"
"this password carefully! Unauthorized use of the root account can\n"
"be extremely dangerous to the integrity of the system and its data,\n"
"and other systems connected to it. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should *never* be written down. Do not make the password too long or\n"
"complicated, though: you must be able to remember without too much\n"
"effort."
msgstr ""
"Agora pode introduci-la contrasinal do superusuario para o seu sistema\n"
"Linux Mandrake. A contrasinal deber� ser tecleada d�as veces para\n"
"comprobar que �mbalas d�as son id�nticas.\n"
"\n"
"\n"
"O superusuario (root) � o administrador do sistema, e � o �nico usuario\n"
"� que se lle permete modifica-la configuraci�n do sistema. �Por tanto,\n"
"escolla a contrasinal con coidado! O uso non autorizado da conta de root\n"
"pode ser extremadamente perigoso para a integridade do sistema e os seus\n"
"datos, e para os outros sistemas conectados a el. A contrasinal deber�a\n"
"ser unha mestura de caracteres alfanum�ricos e de 8 caracteres de longo,\n"
"polo menos. *Nunca* debe ser anotado. Non escolla unha contrasinal longa\n"
"de m�is ou complicada: ten que ser capaz de lembrala sen moito esforzo."

#: ../help.pm_.c:249
msgid ""
"To enable a more secure system, you should select \"Use shadow file\" and\n"
"\"Use MD5 passwords\"."
msgstr ""
"Para activar un sistema m�is seguro, deber�a escoller \"Usar ficheiro "
"shadow\"\n"
"e \"Usar contrasinais MD5\"."

#: ../help.pm_.c:253
msgid ""
"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
"network administrator."
msgstr ""
"Se a s�a rede usa NIS, escolla \"Usar NIS\". Se non o sabe, preg�ntelle �\n"
"seu administrador de rede."

#: ../help.pm_.c:257
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"privileged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""
"Pode agora crear unha ou varias contas de usuarios �normais�, como\n"
"contraposici�n � conta de usuario �privilexiado�, root. Vostede\n"
"pode crear unha ou m�is contas para cada persoa � que vostede queira\n"
"permitirlle o uso do ordenador. Note que cada conta de usuario ter�\n"
"as s�as preferencias (entorno gr�fico, configuraci�n dos programas, etc.)\n"
"e o seu propio directorio (chamado \"home\"), no que se almacenan esas\n"
"preferencias.\n"
"\n"
"\n"
"Antes que nada, �cree unha conta para vostede mesmo! A�nda se � a �nica\n"
"persoa que vai usa-la m�quina, NON debe conectarse como root para o uso\n"
"diario do sistema: � un risco de seguridade elevado. Facer que o\n"
"sistema fique totalmente inoperante, pode ser moitas veces causa dun\n"
"simple erro � teclear.\n"
"\n"
"\n"
"Polo tanto, debe conectarse � sistema usando a conta de usuario normal que\n"
"vai crear aqu�, e conectarse como root s� para as tarefas de administraci�n\n"
"que o precisen."

#: ../help.pm_.c:276
msgid ""
"It is strongly recommended that you answer \"Yes\" here. If you install\n"
"Microsoft Windows at a later date it will overwrite the boot sector.\n"
"Unless you have made a bootdisk as suggested, you will not be able to\n"
"boot into Linux any more."
msgstr ""
"Recom�ndase encarecidamente que responda \"Si\" aqu�. Se vostede instala\n"
"Microsoft Windows m�is adiante, sobrescribirase o sector de arrinque.\n"
"A menos que fixese un disquete de arrinque coma se lle suxere, non ser�\n"
"capaz de voltar a arrincar Linux."

#: ../help.pm_.c:282
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""
"Debe indicar onde desexa po�er a informaci�n\n"
"necesaria para arrincar Linux.\n"
"\n"
"\n"
"A menos que sepa exactamente o que fai, elixa sempre\n"
"\"Primeiro sector do disco (MBR)\"."

#: ../help.pm_.c:290
msgid ""
"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
"(the master drive on the primary channel)."
msgstr ""
"A menos que vostede saiba que � outra espec�ficamente, a elecci�n habitual "
"�\n"
"\"/dev/hda\" (a unidade mestra do canal primario)."

#: ../help.pm_.c:294
msgid ""
"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
"Normally they are correctly detected during installation. If you don't\n"
"see yours detected, you can add one or more now.\n"
"\n"
"\n"
"If you don't want that everybody could access at one of them, you can "
"remove\n"
"it now (a boot disk will be needed to boot it)."
msgstr ""
"LILO (o LInux LOader) pode arrincar Linux e outros sistemas operativos.\n"
"Normalmente det�ctanse correctamente durante a instalaci�n. Se non mira\n"
"os seus detectados, pode agora engadir un ou m�is.\n"
"\n"
"\n"
"Se non quere que todo o mundo poda acceder a un deles, pode quitalo agora\n"
"(necesitarase un disquete de arrinque para utilizalo)."

#: ../help.pm_.c:303
msgid ""
"LILO main options are:\n"
"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
"partition) that contains the boot sector. Unless you know specifically\n"
"otherwise, choose \"/dev/hda\".\n"
"\n"
"\n"
"  - Linear: Generate linear sector addresses instead of\n"
"sector/head/cylinder addresses. Linear addresses are translated at run\n"
"time and do not depend on disk geometry. Note that boot disks may not be\n"
"portable if \"linear\" is used, because the BIOS service to determine the\n"
"disk geometry does not work reliably for floppy  disks. When using\n"
"\"linear\" with large disks, /sbin/lilo may generate references to\n"
"inaccessible disk areas, because 3D sector addresses are not known\n"
"before boot time.\n"
"\n"
"\n"
"  - Compact: Tries to merge read requests for adjacent sectors into a\n"
"single read request. This drastically reduces load time and keeps the\n"
"map smaller. Using \"compact\" is especially recommended when booting from\n"
"a floppy disk.\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero.\n"
"\n"
"\n"
"  - Video mode: This specifies the VGA text mode that should be selected\n"
"when booting. The following values are available: \n"
"    * normal: select normal 80x25 text mode.\n"
"    * <number>:  use the corresponding text mode."
msgstr ""
"As opci�ns principais do LILO son:\n"
"  - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
"partici�n dun disco duro) que cont�n o sector de arrinque. A menos que\n"
"saiba espec�ficamente que � outro, escolla \"/dev/hda\".\n"
"\n"
"\n"
"  - Lineal: Xerar enderezos lineais de sectores, en vez de enderezos\n"
"sector/testa/cilindro. Os enderezos lineais trasl�danse en tempo de\n"
"arrinque, e non depende da xeometr�a do disco. Perc�tese de que os\n"
"disquetes de arrinque non ser�n portables se usa \"lineal\", xa que\n"
"a BIOS non determina correctamente a xeometr�a dos disquetes. Cando use\n"
"\"lineal\" con discos grandes, /sbin/lilo pode xerar referencias a �reas\n"
"non accesibles do disco, porque os enderezos de sector 3D non se co�ecen\n"
"antes do tempo de arrinque.\n"
"\n"
"\n"
"  - Compacto: Tenta mesturar as petici�ns de lectura de sectores adxacentes\n"
"nunha soa petici�n de lectura. Isto reduce dr�sticamente o tempo de carga e\n"
"fai que o mapa sexa m�is pequeno. Usar \"compacto\" � recomendado\n"
"especialmente � arrincar dun disquete.\n"
"\n"
"\n"
"  - Retardo antes de arrinca-la imaxe por omisi�n: Indica o n�mero de\n"
"d�cimas de segundo que agardar� o boot loader antes de arrincar a\n"
"primeira imaxe. Isto � �til nos sistemas que arrincan inmediatamente do\n"
"disco duro tras activa-lo teclado. O boot loader non agarda se o "
"\"retardo\"\n"
"� cero ou non se indica.\n"
"\n"
"\n"
"  - Modo de v�deo: Indica o modo de texto VGA que ser� utilizado �\n"
"arrincar. Os seguintes valores est�n dispo�ibles:\n"
"    * normal: escoller modo de texto normal 80x25.\n"
"    * <n�mero>: usa-lo modo de texto correspondente."

#: ../help.pm_.c:338
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""
"Agora � o momento de configura-lo sistema de fiestras X, que �\n"
"o centro da interfaz gr�fica de Linux. Para iso necesita configura-\n"
"-la s�a tarxeta de v�deo e o seu monitor. A maior�a deses pasos est�n\n"
"automatizados, as� que probablemente a s�a tarea limitarase a verificar\n"
"o que se fixo e aceptar a configuraci�n proposta :-)\n"
"\n"
"\n"
"Cando a configuraci�n estea rematada, lanzarase o servidor X\n"
"(a menos que vostede lle pida a DrakX que non), de xeito que\n"
"poida comprobar se todo est� ben e corresponde � que desexa.\n"
"Se non, pode voltar atr�s e troca-la configuraci�n; tantas\n"
"veces como sexa necesario."

#: ../help.pm_.c:351
msgid ""
"If something is wrong in X configuration, use these options to correctly\n"
"configure the X Window System."
msgstr ""
"Se algo vai mal coa configuraci�n das X, use estas opci�ns para configurar\n"
"correctamente o Sistema X Window."

#: ../help.pm_.c:355
msgid ""
"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
"\"No\"."
msgstr ""
"Se vostede prefere usar un login gr�fico, escolla \"Si\". Doutro xeito,\n"
"escolla \"Non\"."

#: ../help.pm_.c:359
msgid ""
"You can now select some miscellaneous options for you system.\n"
"\n"
"  - Use hard drive optimizations: This option can improve hard disk\n"
"accesses but is only for advanced users, it can ruin your hard drive if\n"
"used incorrectly. Use it only if you know how.\n"
"\n"
"\n"
"  - Choose security level: You can choose a security level for your\n"
"system.\n"
"    Please refer to the manual for more information.\n"
"\n"
"\n"
"  - Precise RAM size if needed: In some cases, Linux is unable to\n"
"correctly detect all the installed RAM on  some systems. If this is the\n"
"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
"normal.\n"
"\n"
"\n"
"  - Removable media automounting: If you would prefer not to manually\n"
"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
"\"umount\", select this option. \n"
"\n"
"\n"
"  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
"booting, select this option (Note: Num Lock will still not work under\n"
"X)."
msgstr ""
"Vostede pode agora escoller algunhas opci�ns diversas para o sistema.\n"
"\n"
"  - Usar optimizaci�ns de disco duro: Esta opci�n mellora os accesos �\n"
"disco duro, pero � s� para usuarios avanzados, xa que pode estraga-lo\n"
"seu disco duro se se usa incorrectamente. �sea s� se sabe como.\n"
"\n"
"\n"
"  - Escoller un nivel de seguridade: Pode escoller un nivel de seguridade\n"
"para o seu sistema.\n"
"    Vaia � manual para m�is informaci�n.\n"
"\n"
"\n"
"  - Tama�o exacto da memoria se se necesita: Nalg�ns casos, Linux non �\n"
"capaz de detectar correctamente toda a memoria instalada nalg�ns sistemas.\n"
"Se � o caso, indique a cantidade correcta. Nota: unha diferencia de 2 ou 4\n"
"MB � normal.\n"
"\n"
"\n"
"  - Automonta-las unidades extra�bles: Se vostede prefere non montar\n"
"manualmente as unidades extra�bles (CD-ROM, disquete, Zip), escribindo\n"
"\"mount\" e \"umount\", escolla esta opci�n.\n"
"\n"
"\n"
"  - Activar Bloq Num � iniciar: Se quere que Bloq Num est� activado\n"
"despois de arrincar, escolla esta opci�n (Nota: Bloq Num a�nda non\n"
"funcionar� nas X)."

#: ../help.pm_.c:387
msgid ""
"Your system is going to reboot.\n"
"\n"
"After rebooting, your new Linux Mandrake system will load automatically.\n"
"If you want to boot into another existing operating system, please read\n"
"the additional instructions."
msgstr ""
"O seu sistema vaise reiniciar.\n"
"\n"
"Despois de reiniciar, o seu novo sistema Linux Mandrake cargarase\n"
"autom�ticamente. Se vostede quere iniciar noutro sistema operativo que xa\n"
"exista, por favor, lea as instrucci�ns adicionais."

#: ../install2.pm_.c:43
msgid "Choose your language"
msgstr "Elixa o seu idioma"

#: ../install2.pm_.c:44
msgid "Select installation class"
msgstr "Clase de instalaci�n"

#: ../install2.pm_.c:45
msgid "Setup SCSI"
msgstr "Configuraci�n SCSI"

#: ../install2.pm_.c:46
msgid "Choose install or upgrade"
msgstr "Instalaci�n ou actualizaci�n"

#: ../install2.pm_.c:47
msgid "Configure mouse"
msgstr "Configuraci�n do rato"

#: ../install2.pm_.c:48
msgid "Choose your keyboard"
msgstr "Elixa o seu teclado"

#: ../install2.pm_.c:49
msgid "Miscellaneous"
msgstr "Varios"

#: ../install2.pm_.c:50
msgid "Setup filesystems"
msgstr "Sistemas de ficheiros"

#: ../install2.pm_.c:51
msgid "Format partitions"
msgstr "Formatar partici�ns"

#: ../install2.pm_.c:52
msgid "Choose packages to install"
msgstr "Elixa paquetes a instalar"

#: ../install2.pm_.c:53
msgid "Install system"
msgstr "Instala-lo sistema"

#: ../install2.pm_.c:54
msgid "Configure networking"
msgstr "Configura-la rede"

#: ../install2.pm_.c:55
msgid "Cryptographic"
msgstr "Criptograf�a"

#: ../install2.pm_.c:56
msgid "Configure timezone"
msgstr "Zona horaria"

#: ../install2.pm_.c:58
msgid "Configure printer"
msgstr "Impresoras"

#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
#: ../install_steps_interactive.pm_.c:577
msgid "Set root password"
msgstr "Contrasinal de root"

#: ../install2.pm_.c:60
msgid "Add a user"
msgstr "Engadir un usuario"

#: ../install2.pm_.c:61
msgid "Create a bootdisk"
msgstr "Crear un disquete de arrinque"

#: ../install2.pm_.c:62
msgid "Install bootloader"
msgstr "Instalar LILO"

#: ../install2.pm_.c:63
msgid "Configure X"
msgstr "Configuraci�n das X"

#: ../install2.pm_.c:64
msgid "Exit install"
msgstr "Sa�r da instalaci�n"

#: ../install2.pm_.c:83
msgid "beginner"
msgstr "principiante"

#: ../install2.pm_.c:83
msgid "developer"
msgstr "programador"

#: ../install2.pm_.c:83
msgid "expert"
msgstr "experto"

#: ../install2.pm_.c:83
msgid "server"
msgstr "servidor"

#: ../install2.pm_.c:311
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Vostede ten que ter unha partici�n ra�z.\n"
"Para iso, cree unha partici�n (ou prema nunha que xa exista).\n"
"Ent�n escolla a acci�n ``Punto de montaxe'', e p��aa a `/'"

#: ../install2.pm_.c:327
msgid "Not enough swap to fulfill installation, please add some"
msgstr ""
"Non hai espacio de intercambio de abondo para remata-la instalaci�n,\n"
"por favor, engada alg�n"

#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Non podo le-la s�a t�boa de partici�ns, est� demasiado deteriorada :-(\n"
"Probarase a ir po�endo en branco as partici�ns malas"

#: ../install_any.pm_.c:210
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake non puido ler correctamente a t�boa de partici�ns.\n"
"�Contin�e � seu risco!"

#: ../install_any.pm_.c:220
msgid "Searching root partition."
msgstr "Buscando a partici�n ra�z."

#: ../install_any.pm_.c:249
msgid "Information"
msgstr "Informaci�n"

#: ../install_any.pm_.c:250
#, c-format
msgid "%s: This is not a root partition, please select another one."
msgstr "%s : Esta non � unha partici�n ra�z, elixa outra por favor."

#: ../install_any.pm_.c:252
msgid "No root partition found"
msgstr "Non se atopou ningunha partici�n ra�z"

#: ../install_any.pm_.c:289
msgid "Can't use broadcast with no NIS domain"
msgstr "Non se pode usar broadcast sen un dominio NIS"

#: ../install_any.pm_.c:473
msgid "Error reading file $f"
msgstr "Erro o le-lo ficheiro $f"

#: ../install_any.pm_.c:479
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr "Arquivo kickstart %s err�neo (fallou %s)"

#: ../install_steps.pm_.c:72
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Ocorreu un erro, e o programa non sabe como manexalo de\n"
"maneira limpa. Contin�e � seu risco."

#: ../install_steps.pm_.c:136
#, c-format
msgid "Duplicate mount point %s"
msgstr "Punto de montaxe %s duplicado"

#: ../install_steps.pm_.c:295
#, fuzzy, c-format
msgid "Welcome to %s"
msgstr "Benvida �s Crackers"

#: ../install_steps.pm_.c:562
msgid "No floppy drive available"
msgstr "Ningunha disqueteira dispo�ible"

#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
#, c-format
msgid "Entering step `%s'\n"
msgstr "Entrando na etapa '%s'\n"

#: ../install_steps_gtk.pm_.c:259
msgid ""
"WARNING!\n"
"\n"
"DrakX now needs to resize your Windows partition. Be careful: this operation "
"is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"�AVISO!\n"
"\n"
"DrakX necesita agora redimensiona-la s�a partici�n de Windows. Te�a "
"coidado:\n"
"esta operaci�n � perigosa. Se a�nda non o fixo, deber�a executar primeiro\n"
"scandisk (e opcionalmente defrag) nesta partici�n e facer unha copia de\n"
"seguridade dos seus datos.\n"
"Cando estea seguro, prema Ok."

#: ../install_steps_gtk.pm_.c:278
msgid "Automatic resizing failed"
msgstr "Fallou o redimensionamento autom�tico"

#: ../install_steps_gtk.pm_.c:294
msgid "You must have a swap partition"
msgstr "Debe ter unha partici�n de intercambio"

#: ../install_steps_gtk.pm_.c:296
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Non disp�n de partici�n de swap\n"
"\n"
"�Desexa continuar de t�dolos xeitos?"

#: ../install_steps_gtk.pm_.c:312
msgid ""
"Now that you've selected desired groups, please choose \n"
"how many packages you want, ranging from minimal to full \n"
"installation of each selected groups."
msgstr ""

#: ../install_steps_gtk.pm_.c:315
msgid "You will be able to choose more precisely in next step"
msgstr "Vostede poder� escoller con m�is precisi�n no seguinte paso"

#: ../install_steps_gtk.pm_.c:317
msgid "Choose the size you want to install"
msgstr "Elixa o tama�o que quere instalar"

#: ../install_steps_gtk.pm_.c:361
msgid "Total size: "
msgstr "Tama�o total: "

#: ../install_steps_gtk.pm_.c:372
msgid "Bad package"
msgstr "Paquete err�neo"

#: ../install_steps_gtk.pm_.c:373 ../standalone/rpmdrake_.c:136
#, c-format
msgid "Version: %s\n"
msgstr "Versi�n: %s\n"

#: ../install_steps_gtk.pm_.c:374 ../standalone/rpmdrake_.c:137
#, c-format
msgid "Size: %d KB\n"
msgstr "Tama�o: %d KB\n"

#: ../install_steps_gtk.pm_.c:489
msgid "Choose the packages you want to install"
msgstr "Elixa os paquetes que desexa instalar"

#: ../install_steps_gtk.pm_.c:492
msgid "Info"
msgstr "Info"

#: ../install_steps_gtk.pm_.c:500 ../install_steps_interactive.pm_.c:81
#: ../standalone/rpmdrake_.c:161
msgid "Install"
msgstr "Instalar"

#: ../install_steps_gtk.pm_.c:519 ../install_steps_interactive.pm_.c:317
msgid "Installing"
msgstr "Instalando"

#: ../install_steps_gtk.pm_.c:522
msgid "Estimating"
msgstr "Estimando"

#: ../install_steps_gtk.pm_.c:526
msgid "Please wait, "
msgstr "Agarde, por favor, "

#: ../install_steps_gtk.pm_.c:528
msgid "Time remaining "
msgstr "Tempo restante "

#: ../install_steps_gtk.pm_.c:529
msgid "Total time "
msgstr "Tempo total "

#: ../install_steps_gtk.pm_.c:534 ../install_steps_interactive.pm_.c:317
msgid "Preparing installation"
msgstr "Preparando a instalaci�n"

#: ../install_steps_gtk.pm_.c:544
#, c-format
msgid "%d packages"
msgstr "%d paquetes"

#: ../install_steps_gtk.pm_.c:544
msgid ", %U MB"
msgstr ", %U MB"

#: ../install_steps_gtk.pm_.c:549
#, c-format
msgid "Installing package %s"
msgstr "Instalando o paquete %s"

#: ../install_steps_gtk.pm_.c:574
msgid "Go on anyway?"
msgstr "�Seguir adiante?"

#: ../install_steps_gtk.pm_.c:574
msgid "There was an error ordering packages:"
msgstr "Houbo un erro � ordea-los paquetes:"

#: ../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "Ocorreu un erro"

#: ../install_steps_interactive.pm_.c:54
msgid "Which language do you want?"
msgstr "�Qu� idioma desexa?"

#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
msgid "Keyboard"
msgstr "Teclado"

#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
msgid "What is your keyboard layout?"
msgstr "�Cal � o seu tipo de teclado?"

#: ../install_steps_interactive.pm_.c:79
msgid "Install/Upgrade"
msgstr "Instalar/Actualizar"

#: ../install_steps_interactive.pm_.c:80
msgid "Is this an install or an upgrade?"
msgstr "�� unha instalaci�n ou unha actualizaci�n?"

#: ../install_steps_interactive.pm_.c:81
msgid "Upgrade"
msgstr "Actualizaci�n"

#: ../install_steps_interactive.pm_.c:89
msgid "Root Partition"
msgstr "Partici�n ra�z"

#: ../install_steps_interactive.pm_.c:90
msgid "What is the root partition (/) of your system?"
msgstr "�Cal � a partici�n ra�z (/) do seu sistema?"

#: ../install_steps_interactive.pm_.c:100
msgid "Recommended"
msgstr "Recomendado"

#: ../install_steps_interactive.pm_.c:101
msgid "Customized"
msgstr "Persoalizado"

#: ../install_steps_interactive.pm_.c:102
msgid "Expert"
msgstr "Experto"

#: ../install_steps_interactive.pm_.c:104
#: ../install_steps_interactive.pm_.c:118
msgid "Install Class"
msgstr "Clase de Instalaci�n"

#: ../install_steps_interactive.pm_.c:105
msgid "What installation class do you want?"
msgstr "�Qu� clase de instalaci�n desexa?"

#: ../install_steps_interactive.pm_.c:114
msgid "Normal"
msgstr "Normal"

#: ../install_steps_interactive.pm_.c:115
msgid "Development"
msgstr "Programador"

#: ../install_steps_interactive.pm_.c:116
msgid "Server"
msgstr "Servidor"

#: ../install_steps_interactive.pm_.c:119
msgid "What usage do you want?"
msgstr "�Qu� utilizaci�n desexa?"

#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
msgid "What is the type of your mouse?"
msgstr "�Cal � o tipo do seu rato?"

#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
msgid "Mouse Port"
msgstr "Porto do rato"

#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
msgid "Which serial port is your mouse connected to?"
msgstr "�A qu� porto serie est� conectado o rato?"

#: ../install_steps_interactive.pm_.c:157
msgid "no available partitions"
msgstr "ningunha partici�n dispo�ible"

#: ../install_steps_interactive.pm_.c:159
#, c-format
msgid "(%dMb)"
msgstr "(%d MB)"

#: ../install_steps_interactive.pm_.c:166
msgid "Which partition do you want to use as your root partition"
msgstr "�Que partici�n desexa usar como partici�n ra�z?"

#: ../install_steps_interactive.pm_.c:173
msgid "Choose the mount points"
msgstr "Seleccione os puntos de montaxe"

#: ../install_steps_interactive.pm_.c:185
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Necesita reinicia-lo equipo para que a modificaci�n da t�boa\n"
"de partici�ns se tome en conta"

#: ../install_steps_interactive.pm_.c:207
msgid "Choose the partitions you want to format"
msgstr "Elixa as partici�ns que desexa formatar"

#: ../install_steps_interactive.pm_.c:211
msgid "Check bad blocks?"
msgstr ""

#: ../install_steps_interactive.pm_.c:230
msgid "Looking for available packages"
msgstr "Buscando os paquetes dispo�ibles"

#: ../install_steps_interactive.pm_.c:236
msgid "Finding packages to upgrade"
msgstr "Atopando os paquetes a actualizar"

#: ../install_steps_interactive.pm_.c:266
#, c-format
msgid ""
"You need %dMB for a full install of the groups you selected.\n"
"You can go on anyway, but be warned that you won't get all packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:290
msgid "Package Group Selection"
msgstr "Selecci�n dos Grupos de Paquetes"

#: ../install_steps_interactive.pm_.c:326
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instalando o paquete %s\n"
"%d%%"

#: ../install_steps_interactive.pm_.c:335
msgid "Post install configuration"
msgstr "Configuraci�n despois da instalaci�n"

#: ../install_steps_interactive.pm_.c:346
msgid "Keep the current IP configuration"
msgstr "Conserva-la configuraci�n IP actual"

#: ../install_steps_interactive.pm_.c:347
msgid "Reconfigure network now"
msgstr "Reconfigura-la rede agora"

#: ../install_steps_interactive.pm_.c:348
#: ../install_steps_interactive.pm_.c:360
msgid "Do not set up networking"
msgstr "Non configura-la rede"

#: ../install_steps_interactive.pm_.c:350
#: ../install_steps_interactive.pm_.c:358
msgid "Network Configuration"
msgstr "Configuraci�n da Rede"

#: ../install_steps_interactive.pm_.c:351
msgid "Local networking has already been configured. Do you want to:"
msgstr "A rede local xa foi configurada. Desexa:"

#: ../install_steps_interactive.pm_.c:359
msgid "Do you want to configure networking for your system?"
msgstr "�Quere configura-la rede no seu sistema?"

#: ../install_steps_interactive.pm_.c:360
msgid "Dialup with modem"
msgstr "Chamar cun m�dem"

#: ../install_steps_interactive.pm_.c:360
msgid "Local LAN"
msgstr "Rede Local"

#: ../install_steps_interactive.pm_.c:369
msgid "no network card found"
msgstr "non se atopou ningunha tarxeta de rede"

#: ../install_steps_interactive.pm_.c:399
#: ../install_steps_interactive.pm_.c:400
#, c-format
msgid "Configuring network device %s"
msgstr "Configurar o dispositivo de rede %s"

#: ../install_steps_interactive.pm_.c:401
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Introduza a direcci�n IP desta m�quina, por favor.\n"
"Cada valor ten que ser introducido coma unha direcci�n IP en\n"
"notaci�n decimal con puntos (por exemplo: 1.2.3.4)."

#: ../install_steps_interactive.pm_.c:404
msgid "Automatic IP"
msgstr "IP autom�tica"

#: ../install_steps_interactive.pm_.c:404
msgid "IP address:"
msgstr "Direcci�n IP:"

#: ../install_steps_interactive.pm_.c:404
msgid "Netmask:"
msgstr "M�scara de rede:"

#: ../install_steps_interactive.pm_.c:405
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
msgid "IP address should be in format 1.2.3.4"
msgstr "As direcci�ns IP deben estar no formato 1.2.3.4"

#: ../install_steps_interactive.pm_.c:429
msgid "Configuring network"
msgstr "Configurando a rede"

#: ../install_steps_interactive.pm_.c:430
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Introduza o nome da s�a m�quina.\n"
"Ese nome debe ser un nome completamente cualificado,\n"
"como � mimaquina.milab.micomp.es �.\n"
"Pode tam�n introduci-la direcci�n IP da pasarela se usa unha"

#: ../install_steps_interactive.pm_.c:434
msgid "DNS server:"
msgstr "Servidor DNS:"

#: ../install_steps_interactive.pm_.c:434
msgid "Gateway device:"
msgstr "Dispositivo de pasarela de rede:"

#: ../install_steps_interactive.pm_.c:434
msgid "Gateway:"
msgstr "Pasarela:"

#: ../install_steps_interactive.pm_.c:434
msgid "Host name:"
msgstr "Nome de m�quina:"

#: ../install_steps_interactive.pm_.c:447
msgid "Try to find a modem?"
msgstr "�Desexa que se tente atopar un m�dem?"

#: ../install_steps_interactive.pm_.c:457
msgid "Which serial port is your modem connected to?"
msgstr "�A que porto serie est� conectado o seu m�dem?"

#: ../install_steps_interactive.pm_.c:462
msgid "Dialup options"
msgstr "Opci�ns de chamada"

#: ../install_steps_interactive.pm_.c:463
msgid "Connection name"
msgstr "Nome da conexi�n"

#: ../install_steps_interactive.pm_.c:464
msgid "Phone number"
msgstr "N�mero de tel�fono"

#: ../install_steps_interactive.pm_.c:465
msgid "Login ID"
msgstr "ID de Login"

#: ../install_steps_interactive.pm_.c:466
#: ../install_steps_interactive.pm_.c:578
#: ../install_steps_interactive.pm_.c:624
#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
msgid "Password"
msgstr "Contrasinal"

#: ../install_steps_interactive.pm_.c:467
msgid "Authentication"
msgstr "Autenticaci�n"

#: ../install_steps_interactive.pm_.c:467
msgid "CHAP"
msgstr "CHAP"

#: ../install_steps_interactive.pm_.c:467
msgid "PAP"
msgstr "PAP"

#: ../install_steps_interactive.pm_.c:467
msgid "Script-based"
msgstr "Baseado nun script"

#: ../install_steps_interactive.pm_.c:467
msgid "Terminal-based"
msgstr "Baseado nun terminal"

#: ../install_steps_interactive.pm_.c:468
msgid "Domain name"
msgstr "Nome do dominio"

#: ../install_steps_interactive.pm_.c:469
msgid "First DNS Server"
msgstr "Primeiro Servidor DNS"

#: ../install_steps_interactive.pm_.c:470
msgid "Second DNS Server"
msgstr "Segundo Servidor DNS"

#: ../install_steps_interactive.pm_.c:483
msgid "Bringing up the network"
msgstr "Activando a rede"

#: ../install_steps_interactive.pm_.c:492
#, fuzzy
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
"respect the provision of these applicable laws, he/they will incur serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Vostede ter� agora a posibilidade baixar programas de criptograf�a.\n"
"\n"
"AVISO:\n"
"\n"
"Por mor de requerimentos xerais aplicables a estos programas, e impostos\n"
"por varias xurisdicci�ns, o cliente e/ou o usuario final destes programas "
"ten\n"
"que se asegurar de que as leis da s�a xurisdicci�n lle permiten baixar,\n"
"almacenar e/ou usar estes programas.\n"
"\n"
"Ademais, o cliente e/ou o usuario final ten que ter especial coidado en non\n"
"infrinxi-las leis da s�a xurisdicci�n. Se o cliente e/ou o usuario final "
"non\n"
"respeta estas leis aplicables, incorrer� en sanci�ns graves.\n"
"\n"
"De ning�n xeito Mandrakesoft nin os seus fabricantes e/ou provedores ser�n\n"
"responsables de danos especiais, indirectos ou incidentais, sexan o que "
"foren\n"
"(incluindo, pero non limitando a, perda de beneficios, interrupci�n dos\n"
"negocios, perda de datos comerciais e outras perdas pecuniarias, e nas\n"
"eventuais responsabilidades e indemnizaci�ns a seren pagadas por decisi�n\n"
"dun tribunal) procedentes do uso, posesi�n, ou simplemente o feito de "
"baixar\n"
"este software, � cal o cliente e/ou o usuario final tivese eventualmente\n"
"acceso despois de asinar este acordo.\n"
"\n"
"Para calquera pregunta acerca de este acordo, por favor p��ase en contacto "
"con\n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../install_steps_interactive.pm_.c:523
msgid "Choose a mirror from which to get the packages"
msgstr "Escoller un espello do que colle-los paquetes"

#: ../install_steps_interactive.pm_.c:528
msgid "Contacting the mirror to get the list of available packages"
msgstr "Contactando co espello para obte-la lista dos paquetes dispo�ibles"

#: ../install_steps_interactive.pm_.c:532
msgid "Which packages do you want to install"
msgstr "Paquetes que desexa instalar"

#: ../install_steps_interactive.pm_.c:534
msgid "Downloading cryptographic packages"
msgstr "Baixando paquetes criptogr�ficos"

#: ../install_steps_interactive.pm_.c:544
msgid "Which is your timezone?"
msgstr "�Cal � a sua zona horaria?"

#: ../install_steps_interactive.pm_.c:545
msgid "Is your hardware clock set to GMT?"
msgstr "�O reloxio interno do seu ordenador usa a hora GMT?"

#: ../install_steps_interactive.pm_.c:555
msgid "Printer"
msgstr "Impresora"

#: ../install_steps_interactive.pm_.c:556
msgid "Would you like to configure a printer?"
msgstr "�Desexa configurar unha impresora?"

#: ../install_steps_interactive.pm_.c:576
msgid "No password"
msgstr "Sen contrasinal"

#: ../install_steps_interactive.pm_.c:576
#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
#: ../my_gtk.pm_.c:525
msgid "Ok"
msgstr "Aceptar"

#: ../install_steps_interactive.pm_.c:579
#: ../install_steps_interactive.pm_.c:625
#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
msgid "Password (again)"
msgstr "Contrasinal (de novo)"

#: ../install_steps_interactive.pm_.c:581
msgid "Use shadow file"
msgstr "Usar ficheiro shadow"

#: ../install_steps_interactive.pm_.c:581
msgid "shadow"
msgstr "shadow"

#: ../install_steps_interactive.pm_.c:582
msgid "MD5"
msgstr "MD5"

#: ../install_steps_interactive.pm_.c:582
msgid "Use MD5 passwords"
msgstr "Usar contrasinais MD5"

#: ../install_steps_interactive.pm_.c:584
msgid "Use NIS"
msgstr "Usar NIS"

#: ../install_steps_interactive.pm_.c:584
msgid "yellow pages"
msgstr "p�xinas amarelas (yp)"

#: ../install_steps_interactive.pm_.c:588
#: ../install_steps_interactive.pm_.c:636
#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
msgid "Please try again"
msgstr "T�nteo de novo por favor"

#: ../install_steps_interactive.pm_.c:588
#: ../install_steps_interactive.pm_.c:636
#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
msgid "The passwords do not match"
msgstr "As contrasinais non coinciden"

#: ../install_steps_interactive.pm_.c:590
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr ""

#: ../install_steps_interactive.pm_.c:597
msgid "Authentification NIS"
msgstr "Autenticaci�n NIS"

#: ../install_steps_interactive.pm_.c:598
msgid "NIS Domain"
msgstr "Dominio NIS"

#: ../install_steps_interactive.pm_.c:598
msgid "NIS Server"
msgstr "Servidor NIS"

#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
msgid "Accept user"
msgstr "Aceptar usuario"

#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
msgid "Add user"
msgstr "Engadir usuario"

#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
#, c-format
msgid "(already added %s)"
msgstr "(%s xa foi engadido)"

#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Introduza un usuario\n"
"%s"

#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
msgid "Real name"
msgstr "Nome e apelidos"

#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
msgid "User name"
msgstr "Nome de usuario"

#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
msgid "Shell"
msgstr "Shell"

#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
msgid "This password is too simple"
msgstr "Esa contrasinal � demasiado simple"

#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
msgid "Please give a user name"
msgstr "Entre o nome de usuario"

#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "O nome de usuario (login) s� debe conter letras, n�meros, '-' o '_'"

#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
msgid "This user name is already added"
msgstr "Este nome de usuario xa est� engadido"

#: ../install_steps_interactive.pm_.c:659
#, fuzzy
msgid "First drive"
msgstr "Primeiro Servidor DNS"

#: ../install_steps_interactive.pm_.c:660
#, fuzzy
msgid "Second drive"
msgstr "Segundo Servidor DNS"

#: ../install_steps_interactive.pm_.c:661
msgid "Skip"
msgstr "Saltar"

#: ../install_steps_interactive.pm_.c:666
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO on your system, or another operating system removes LILO, or LILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"Un disco de arrinque persoalizado d� posibilidade de arrincar o seu equipo\n"
"baixo Linux sen depender do bootloader normal. Isto pode ser �til se non\n"
"desexa instalar lilo no seu sistema, ou se outro sistema operativo o borra,\n"
"ou se lilo non funciona coa configuraci�n do seu equipo. Un disco de "
"arrinque\n"
"persoalizado tam�n pode ser usado coa imaxe de rescate de Mandrake,\n"
"facendo as� moito m�is f�cil a recuperaci�n no caso de fallo grave do "
"sistema.\n"
"�Desexa crear un disco de arrinque para o seu sistema?"

#: ../install_steps_interactive.pm_.c:675
msgid "Sorry, no floppy drive available"
msgstr "Disculpe, pero non hai ningunha disqueteira dispo�ible"

#: ../install_steps_interactive.pm_.c:678
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Elixa o lector que desexa usar para crea-lo disco de arranque"

#: ../install_steps_interactive.pm_.c:683
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Inserte un disquete na unidade %s"

#: ../install_steps_interactive.pm_.c:684
#: ../install_steps_interactive.pm_.c:1042
msgid "Creating bootdisk"
msgstr "Creando o disco de arrinque"

#: ../install_steps_interactive.pm_.c:691
msgid "Preparing bootloader"
msgstr "Preparando o bootloader"

#: ../install_steps_interactive.pm_.c:703
msgid "First sector of boot partition"
msgstr "Primeiro sector da partici�n de arranque"

#: ../install_steps_interactive.pm_.c:703
msgid "First sector of drive (MBR)"
msgstr "Primeiro sector do disco (MBR)"

#: ../install_steps_interactive.pm_.c:708
msgid "LILO Installation"
msgstr "Instalaci�n de LILO"

#: ../install_steps_interactive.pm_.c:709
msgid "Where do you want to install the bootloader?"
msgstr "��nde quere instalar o bootloader?"

#: ../install_steps_interactive.pm_.c:715
msgid "Do you want to use LILO?"
msgstr "�Desexa usar LILO?"

#: ../install_steps_interactive.pm_.c:718
msgid "Boot device"
msgstr "Dispositivo de arrinque"

#: ../install_steps_interactive.pm_.c:719
msgid "Linear (needed for some SCSI drives)"
msgstr "Linear (necesario para certos discos SCSI)"

#: ../install_steps_interactive.pm_.c:719
msgid "linear"
msgstr "linear"

#: ../install_steps_interactive.pm_.c:720
msgid "Compact"
msgstr "Compacto"

#: ../install_steps_interactive.pm_.c:720
msgid "compact"
msgstr "compacto"

#: ../install_steps_interactive.pm_.c:721
msgid "Delay before booting default image"
msgstr "Retardo antes de arrinca-la imaxe por omisi�n"

#: ../install_steps_interactive.pm_.c:722
msgid "Video mode"
msgstr "Modo de v�deo"

#: ../install_steps_interactive.pm_.c:726
msgid "Restrict command line options"
msgstr "Restrinxir opci�ns da li�a de comandos"

#: ../install_steps_interactive.pm_.c:726
msgid "restrict"
msgstr "restrinxido"

#: ../install_steps_interactive.pm_.c:732
msgid "LILO main options"
msgstr "Opci�ns principais de LILO"

#: ../install_steps_interactive.pm_.c:735
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"A opci�n �restrinxir opci�ns da li�a de comandos� non ten sentido sen "
"contrasinal"

#: ../install_steps_interactive.pm_.c:746
msgid ""
"Here are the following entries in LILO.\n"
"You can add some more or change the existing ones."
msgstr ""
"Aqu� est�n as seguintes entradas no LILO.\n"
"Pode engadir algunhas m�is ou cambia-las que xa existen."

#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
msgid "Add"
msgstr "Engadir"

#: ../install_steps_interactive.pm_.c:757
msgid "Linux"
msgstr "Linux"

#: ../install_steps_interactive.pm_.c:757
msgid "Other OS (windows...)"
msgstr "Outros SO (windows...)"

#: ../install_steps_interactive.pm_.c:757
msgid "Which type of entry do you want to add"
msgstr "Tipo de entrada que desexa engadir"

#: ../install_steps_interactive.pm_.c:777
msgid "Image"
msgstr "Imaxe"

#: ../install_steps_interactive.pm_.c:778
#: ../install_steps_interactive.pm_.c:786
msgid "Root"
msgstr "Ra�z"

#: ../install_steps_interactive.pm_.c:779
msgid "Append"
msgstr "Agregar"

#: ../install_steps_interactive.pm_.c:780
msgid "Initrd"
msgstr "Initrd"

#: ../install_steps_interactive.pm_.c:781
msgid "Read-write"
msgstr "Lectura/escritura"

#: ../install_steps_interactive.pm_.c:787
msgid "Table"
msgstr "T�boa"

#: ../install_steps_interactive.pm_.c:788
msgid "Unsafe"
msgstr "Inseguro"

#: ../install_steps_interactive.pm_.c:793
msgid "Label"
msgstr "Etiqueta"

#: ../install_steps_interactive.pm_.c:795
msgid "Default"
msgstr "Por omisi�n"

#: ../install_steps_interactive.pm_.c:798
msgid "Remove entry"
msgstr "Quitar entrada"

#: ../install_steps_interactive.pm_.c:801
msgid "Empty label not allowed"
msgstr "Etiqueta baleira non permitida"

#: ../install_steps_interactive.pm_.c:802
msgid "This label is already in use"
msgstr "Esta etiqueta xa se est� a usar"

#: ../install_steps_interactive.pm_.c:803
#, c-format
msgid "A entry %s already exists"
msgstr "Xa existe unha entrada %s"

#: ../install_steps_interactive.pm_.c:817
msgid "Installation of LILO failed. The following error occured:"
msgstr "Fallou a instalaci�n de LILO. Ocorreu o erro seguinte:"

#: ../install_steps_interactive.pm_.c:831
msgid "Proxies configuration"
msgstr "Configuraci�n dos proxys"

#: ../install_steps_interactive.pm_.c:832
msgid "HTTP proxy"
msgstr "Proxy HTTP"

#: ../install_steps_interactive.pm_.c:833
msgid "FTP proxy"
msgstr "Proxy FTP"

#: ../install_steps_interactive.pm_.c:839
msgid "Proxy should be http://..."
msgstr "O proxy deber�a ser http://..."

#: ../install_steps_interactive.pm_.c:840
msgid "Proxy should be ftp://..."
msgstr "O proxy deber�a ser ftp://..."

#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
msgid "Welcome To Crackers"
msgstr "Benvida �s Crackers"

#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
msgid "Poor"
msgstr "Probe"

#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
msgid "Low"
msgstr "Baixo"

#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
msgid "Medium"
msgstr "Medio"

#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
msgid "High"
msgstr "Alto"

#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
msgid "Paranoid"
msgstr "Paranoico"

#: ../install_steps_interactive.pm_.c:868
msgid "Miscellaneous questions"
msgstr "Preguntas varias"

#: ../install_steps_interactive.pm_.c:869
msgid "(may cause data corruption)"
msgstr "(pode provocar corrupci�n dos datos)"

#: ../install_steps_interactive.pm_.c:869
msgid "Use hard drive optimisations?"
msgstr "Usar optimizaci�ns de disco duro"

#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
msgid "Choose security level"
msgstr "Escoller un nivel de seguridade"

#: ../install_steps_interactive.pm_.c:871
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Tama�o exacto de memoria se se necesita (atop�ronse %d MB)"

#: ../install_steps_interactive.pm_.c:872
msgid "Removable media automounting"
msgstr "Automonta-las unidades extra�bles"

#: ../install_steps_interactive.pm_.c:874
msgid "Enable num lock at startup"
msgstr "Activar Bloq Num � iniciar"

#: ../install_steps_interactive.pm_.c:877
msgid "Give the ram size in Mb"
msgstr "Dar o tama�o da memoria en MB"

#: ../install_steps_interactive.pm_.c:893
msgid "Use existing configuration for X11?"
msgstr "�Usar a configuraci�n existente para X11?"

#: ../install_steps_interactive.pm_.c:905
#: ../install_steps_interactive.pm_.c:1075
msgid "Try to find PCI devices?"
msgstr "�Desexa que se tenten atopar dispositivos PCI?"

#: ../install_steps_interactive.pm_.c:920
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Algunhas das etapas non foron completadas.\n"
"\n"
"�Desexa realmente sa�r agora?"

#: ../install_steps_interactive.pm_.c:927
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""
"Felicidades, a instalaci�n rematou.\n"
"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
"\n"
"Para informaci�n sobre parches dispo�ibles para esta versi�n\n"
"de Linux Mandrake, consulte o ficheiro de erratas dispo�ibles en\n"
"http://www.linux-mandrake.com.\n"
"\n"
"Para informaci�n sobre a configuraci�n do seu sistema, despois\n"
"da instalaci�n, hai un cap�tulo na Gu�a do Usuario Oficial\n"
"de Linux Mandrake."

#: ../install_steps_interactive.pm_.c:936
msgid "Shutting down"
msgstr "Apagando"

#: ../install_steps_interactive.pm_.c:950
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instalando controlador para a tarxeta %s %s"

#: ../install_steps_interactive.pm_.c:951
#, c-format
msgid "(module %s)"
msgstr "(m�dulo %s)"

#: ../install_steps_interactive.pm_.c:961
#, c-format
msgid "Which %s driver should I try?"
msgstr "�Que controlador de %s desexa que se probe?"

#: ../install_steps_interactive.pm_.c:969
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Nalg�ns casos, o controlador de %s necesita informaci�n extra\n"
"para funcionar correctamente, a�nda que normalmente funcione sin ela.\n"
"�Desexa especificar informaci�n extra para o controlador ou deixar que el\n"
"probe o seu equipo e atope a informaci�n que necesita? �s veces,\n"
"o probar o equipo pode provocar que se pare, pero non deber�a\n"
"causar ning�n dano."

#: ../install_steps_interactive.pm_.c:974
msgid "Autoprobe"
msgstr "Autodetecci�n"

#: ../install_steps_interactive.pm_.c:974
msgid "Specify options"
msgstr "Especificar as opci�ns"

#: ../install_steps_interactive.pm_.c:978
#, c-format
msgid "You may now provide its options to module %s."
msgstr "Agora pode dar as opci�ns para o m�dulo %s."

#: ../install_steps_interactive.pm_.c:984
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Aqu� deben ir as diferentes opci�ns para o m�dulo %s.\n"
"As opci�ns son da forma �nome=valor nome2=valor2 ...�.\n"
"Por exemplo pode ter �io=0x300 irq=7�"

#: ../install_steps_interactive.pm_.c:987
msgid "Module options:"
msgstr "Opci�ns do m�dulo:"

#: ../install_steps_interactive.pm_.c:997
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Fallo o carga-lo m�dulo %s\n"
"�Desexa reintentalo con outros par�metros?"

#: ../install_steps_interactive.pm_.c:1010
msgid "Try to find PCMCIA cards?"
msgstr "�Desexa que se atopen tarxetas PCMCIA?"

#: ../install_steps_interactive.pm_.c:1011
msgid "Configuring PCMCIA cards..."
msgstr "Configurando tarxetas PCMCIA..."

#: ../install_steps_interactive.pm_.c:1011
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../install_steps_interactive.pm_.c:1018
msgid ""
"Linux does not yet fully support ultra dma 66 HPT.\n"
"As a work-around i can make a custom floppy giving access the hard drive on "
"ide2 and ide3"
msgstr ""

#: ../install_steps_interactive.pm_.c:1039
#, fuzzy
msgid ""
"Enter a floppy to create an HTP enabled boot\n"
"(all data on floppy will be lost)"
msgstr ""
"Inserte un disquete no lector\n"
"Perderanse t�dolos datos no disquete"

#: ../install_steps_interactive.pm_.c:1056
msgid "It is necessary to restart installation booting on the floppy"
msgstr ""

#: ../install_steps_interactive.pm_.c:1057
msgid "It is necessary to restart installation with the new parameters"
msgstr ""

#: ../install_steps_interactive.pm_.c:1061
#, c-format
msgid ""
"Failed to create an HTP boot floppy.\n"
"You may have to restart installation and give ``%s'' at the prompt"
msgstr ""

#: ../install_steps_interactive.pm_.c:1081
#, c-format
msgid "Found %s %s interfaces"
msgstr "%s interfaces %s atopadas"

#: ../install_steps_interactive.pm_.c:1082
msgid "Do you have another one?"
msgstr "�Ten algunha outra?"

#: ../install_steps_interactive.pm_.c:1083
#, c-format
msgid "Do you have any %s interface?"
msgstr "�Ten algunha interfaz %s?"

#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
msgid "No"
msgstr "Non"

#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424
msgid "Yes"
msgstr "Si"

#: ../install_steps_interactive.pm_.c:1086
msgid "See hardware info"
msgstr "Informaci�n sobre o hardware"

#: ../install_steps_newt.pm_.c:19
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr "Instalaci�n de Linux-Mandrake %s"

#: ../install_steps_newt.pm_.c:30
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> entre elementos  |  <Space> escoller  |  <F12> seguinte "

#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
msgid "Cancel"
msgstr "Cancelar"

#: ../interactive.pm_.c:181
msgid "Please wait"
msgstr "Agarde, por favor"

#: ../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Ambig�idade (%s), sexa m�is preciso\n"

#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
#: ../interactive_stdio.pm_.c:70
msgid "Bad choice, try again\n"
msgstr "Elecci�n incorrecta, tente de novo\n"

#: ../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (por omisi�n %s) "

#: ../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "�A s�a elecci�n? (por omisi�n %s)"

#: ../interactive_stdio.pm_.c:71
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "�A s�a elecci�n? (por omisi�n %s, teclee 'none' para ningunha)"

#: ../keyboard.pm_.c:88
msgid "Armenian"
msgstr "Armenio"

#: ../keyboard.pm_.c:89
msgid "Belgian"
msgstr "Belga"

#: ../keyboard.pm_.c:90
msgid "Bulgarian"
msgstr "B�lgaro"

#: ../keyboard.pm_.c:91
msgid "Brazilian"
msgstr "Brasileiro"

#: ../keyboard.pm_.c:92
msgid "Swiss (French layout)"
msgstr "Suizo (franc�s)"

#: ../keyboard.pm_.c:93
msgid "Swiss (German layout)"
msgstr "Suizo (alem�n)"

#: ../keyboard.pm_.c:94
msgid "Czech"
msgstr "Checo"

#: ../keyboard.pm_.c:95
msgid "German"
msgstr "Alem�n"

#: ../keyboard.pm_.c:96
msgid "Danish"
msgstr "Dan�s"

#: ../keyboard.pm_.c:97
msgid "Dvorak"
msgstr "Teclado dvorak"

#: ../keyboard.pm_.c:98
msgid "Estonian"
msgstr "Estonio"

#: ../keyboard.pm_.c:99
msgid "Spanish"
msgstr "Espa�ol"

#: ../keyboard.pm_.c:100
msgid "Finnish"
msgstr "Finland�s"

#: ../keyboard.pm_.c:101
msgid "French"
msgstr "Franc�s"

#: ../keyboard.pm_.c:102
msgid "Georgian (\"Russian\" layout)"
msgstr "Xeorxiano (cir�lico)"

#: ../keyboard.pm_.c:103
msgid "Georgian (\"Latin\" layout)"
msgstr "Xeorxiano (latino)"

#: ../keyboard.pm_.c:104
msgid "Greek"
msgstr "Grego"

#: ../keyboard.pm_.c:105
msgid "Hungarian"
msgstr "H�ngaro"

#: ../keyboard.pm_.c:106
msgid "Israeli"
msgstr "Israel�"

#: ../keyboard.pm_.c:107
msgid "Israeli (Phonetic)"
msgstr "Israel� (Fon�tico)"

#: ../keyboard.pm_.c:108
msgid "Icelandic"
msgstr "Island�s"

#: ../keyboard.pm_.c:109
msgid "Italian"
msgstr "Italiano"

#: ../keyboard.pm_.c:110
msgid "Latin American"
msgstr "Latinoamericano"

#: ../keyboard.pm_.c:111
msgid "Dutch"
msgstr "Holand�s"

#: ../keyboard.pm_.c:112
msgid "Lithuanian AZERTY"
msgstr "Lituano AZERTY"

#: ../keyboard.pm_.c:113
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Lituano \"ringleira de n�meros\" QWERTY"

#: ../keyboard.pm_.c:114
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Lituano \"fon�tico\" QWERTY"

#: ../keyboard.pm_.c:115
msgid "Norwegian"
msgstr "Noruego"

#: ../keyboard.pm_.c:116
#, fuzzy
msgid "Polish (qwerty layout)"
msgstr "Suizo (alem�n)"

#: ../keyboard.pm_.c:117
#, fuzzy
msgid "Polish (qwertz layout)"
msgstr "Suizo (alem�n)"

#: ../keyboard.pm_.c:118
msgid "Portuguese"
msgstr "Portugu�s"

#: ../keyboard.pm_.c:119
msgid "Canadian (Quebec)"
msgstr "Canadiano (Qu�bec)"

#: ../keyboard.pm_.c:120
msgid "Russian"
msgstr "Ruso"

#: ../keyboard.pm_.c:121
msgid "Russian (Yawerty)"
msgstr "Ruso (Yawerty)"

#: ../keyboard.pm_.c:122
msgid "Swedish"
msgstr "Sueco"

#: ../keyboard.pm_.c:123
msgid "Slovenian"
msgstr "Esloveno"

#: ../keyboard.pm_.c:124
msgid "Slovakian"
msgstr "Eslovaco"

#: ../keyboard.pm_.c:125
msgid "Thai keyboard"
msgstr "Teclado Thai"

#: ../keyboard.pm_.c:126
msgid "Turkish (traditional \"F\" model)"
msgstr "Turco (tradicional modelo \"F\")"

#: ../keyboard.pm_.c:127
msgid "Turkish (modern \"Q\" model)"
msgstr "Turco (moderno modelo \"Q\")"

#: ../keyboard.pm_.c:128
msgid "Ukrainian"
msgstr "Ucraniano"

#: ../keyboard.pm_.c:129
msgid "UK keyboard"
msgstr "Brit�nico"

#: ../keyboard.pm_.c:130
msgid "US keyboard"
msgstr "Estadounidense"

#: ../keyboard.pm_.c:131
msgid "US keyboard (international)"
msgstr "Estadounidense (internacional)"

#: ../keyboard.pm_.c:132
msgid "Yugoslavian (latin layout)"
msgstr "Iugoslavo (latino)"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# '\255' is '�' (inversed !) in cp437 encoding
# '\242' is '�' (oacute) in cp437 encoding
#
#: ../lilo.pm_.c:145
#, c-format
msgid ""
"Welcome to LILO the operating system chooser!\n"
"\n"
"To list the possible choices, press <TAB>.\n"
"\n"
"To load one of them, write its name and press <ENTER> or wait %d seconds for "
"default boot.\n"
"\n"
msgstr ""
"�Benvido a LILO, o selector de sistema operativo!\n"
"\n"
"Para mira-las posibles selecci�ns, prema <TAB>.\n"
"\n"
"Para arrincar un deles, teclee o seu nome e prema <ENTER>\n"
"ou espere %d segundos para que arrinque o sistema por omisi�n.\n"

#: ../mouse.pm_.c:20
msgid "No Mouse"
msgstr "Ning�n rato"

#: ../mouse.pm_.c:21
msgid "Microsoft Rev 2.1A or higher (serial)"
msgstr "Microsoft rev 2.1A ou superior (serie)"

#: ../mouse.pm_.c:22
msgid "Logitech CC Series (serial)"
msgstr "Logitech CC Series (serie)"

#: ../mouse.pm_.c:23
msgid "Logitech MouseMan+/FirstMouse+ (serial)"
msgstr "Logitech MouseMan+/FirstMouse+ (serie)"

#: ../mouse.pm_.c:24
msgid "ASCII MieMouse (serial)"
msgstr "ASCII MieMouse (serie)"

#: ../mouse.pm_.c:25
msgid "Genius NetMouse (serial)"
msgstr "Genius NetMouse (serie)"

#: ../mouse.pm_.c:26
msgid "Microsoft IntelliMouse (serial)"
msgstr "Microsoft IntelliMouse (serie)"

#: ../mouse.pm_.c:27
msgid "MM Series (serial)"
msgstr "MM Series (serie)"

#: ../mouse.pm_.c:28
msgid "MM HitTablet (serial)"
msgstr "MM HitTablet (serie)"

#: ../mouse.pm_.c:29
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Rato Logitech (serie, antigo tipo C7)"

#: ../mouse.pm_.c:30
msgid "Logitech MouseMan/FirstMouse (serial)"
msgstr "Logitech MouseMan/FirstMouse (serie)"

#: ../mouse.pm_.c:31
msgid "Generic Mouse (serial)"
msgstr "Rato xen�rico (serie)"

#: ../mouse.pm_.c:32
msgid "Microsoft compatible (serial)"
msgstr "Compatible Microsoft (serie)"

#: ../mouse.pm_.c:33
msgid "Generic 3 Button Mouse (serial)"
msgstr "Rato de 3 bot�ns xen�rico (serie)"

#: ../mouse.pm_.c:34
msgid "Mouse Systems (serial)"
msgstr "Mouse Systems (serie)"

#: ../mouse.pm_.c:35
msgid "Generic Mouse (PS/2)"
msgstr "Rato xen�rico (PS/2)"

#: ../mouse.pm_.c:36
msgid "Logitech MouseMan/FirstMouse (ps/2)"
msgstr "Logitech MouseMan/FirstMouse (PS/2)"

#: ../mouse.pm_.c:37
msgid "Generic 3 Button Mouse (PS/2)"
msgstr "Rato de 3 botones xen�rico (PS/2)"

#: ../mouse.pm_.c:38
msgid "ALPS GlidePoint (PS/2)"
msgstr "ALPS GlidePoint (PS/2)"

#: ../mouse.pm_.c:39
msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
msgstr "Logitech MouseMan+/FirstMouse+ (PS/2)"

#: ../mouse.pm_.c:40
msgid "Kensington Thinking Mouse (PS/2)"
msgstr "Kensington Thinking Mouse (PS/2)"

#: ../mouse.pm_.c:41
msgid "ASCII MieMouse (PS/2)"
msgstr "ASCII MieMouse (PS/2)"

#: ../mouse.pm_.c:42
msgid "Genius NetMouse (PS/2)"
msgstr "Genius NetMouse (PS/2)"

#: ../mouse.pm_.c:43
msgid "Genius NetMouse Pro (PS/2)"
msgstr "Genius NetMouse Pro (PS/2)"

#: ../mouse.pm_.c:44
msgid "Genius NetScroll (PS/2)"
msgstr "Genius NetScroll (PS/2)"

#: ../mouse.pm_.c:45
msgid "Microsoft IntelliMouse (PS/2)"
msgstr "Microsoft IntelliMouse (PS/2)"

#: ../mouse.pm_.c:46
msgid "ATI Bus Mouse"
msgstr "Rato Bus ATI"

#: ../mouse.pm_.c:47
msgid "Microsoft Bus Mouse"
msgstr "Rato Bus Microsoft"

#: ../mouse.pm_.c:48
msgid "Logitech Bus Mouse"
msgstr "Rato Bus Logitech"

#: ../mouse.pm_.c:49
msgid "USB Mouse"
msgstr "Rato USB"

#: ../mouse.pm_.c:50
msgid "USB Mouse (3 buttons or more)"
msgstr "Rato USB (3 ou m�is bot�ns)"

#: ../partition_table.pm_.c:486
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Ten un burato na tabla de partici�ns, pero non podo usalo.\n"
"A �nica soluci�n � despraza-las s�as partici�ns primarias para que\n"
"o burato est� despois das partici�ns extendidas"

#: ../partition_table.pm_.c:572
#, c-format
msgid "Error reading file %s"
msgstr "Erro o le-lo ficheiro %s"

#: ../partition_table.pm_.c:579
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Fallou a restauraci�n a partir do ficheiro %s: %s"

#: ../partition_table.pm_.c:581
msgid "Bad backup file"
msgstr "Ficheiro de backup incorrecto"

#: ../partition_table.pm_.c:602
#, c-format
msgid "Error writing to file %s"
msgstr "Erro � escribir � ficheiro %s"

#: ../placeholder.pm_.c:5
#, fuzzy
msgid "Show less"
msgstr "Ver todo"

#: ../placeholder.pm_.c:6
msgid "Show more"
msgstr ""

#: ../printer.pm_.c:244
msgid "Local printer"
msgstr "Impresora local"

#: ../printer.pm_.c:245
msgid "Remote lpd"
msgstr "Impresora remota"

#: ../printer.pm_.c:246
msgid "SMB/Windows 95/98/NT"
msgstr "Impresora SMB/Windows 95/98/NT"

#: ../printer.pm_.c:247
msgid "NetWare"
msgstr "Impresora Netware"

#: ../printerdrake.pm_.c:75
msgid "Local Printer Options"
msgstr "Opci�ns de impresi�n local"

#: ../printerdrake.pm_.c:76
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue?"
msgstr ""
"Cada cola de impresi�n (� que se dirixen os traballos de impresi�n)\n"
"necesita un nome (frecuentemente lp) e un directorio spool asociado\n"
"a el. �Qu� nome e directorio quere que se utilicen para esta cola?"

#: ../printerdrake.pm_.c:79
msgid "Name of queue:"
msgstr "Nome da cola:"

#: ../printerdrake.pm_.c:79
msgid "Spool directory:"
msgstr "Directorio spool:"

#: ../printerdrake.pm_.c:90
msgid "Select Printer Connection"
msgstr "Seleccione a conexi�n da impresora"

#: ../printerdrake.pm_.c:91
msgid "How is the printer connected?"
msgstr "�Como est� conectada a impresora?"

#: ../printerdrake.pm_.c:99
msgid "Detecting devices..."
msgstr "Detectando os dispositivos..."

#: ../printerdrake.pm_.c:99
msgid "Test ports"
msgstr "Probar portos"

#: ../printerdrake.pm_.c:112
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "Unha impresora, de modelo �%s�, foi detectada en "

#: ../printerdrake.pm_.c:119
msgid "Local Printer Device"
msgstr "Dispositivo de impresi�n local"

#: ../printerdrake.pm_.c:120
msgid ""
"What device is your printer connected to  \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"�A que dispositivo est� conectada a sua impresora?\n"
"(te�a en conta que /dev/lp0 � equivalente al LPT1:)\n"

#: ../printerdrake.pm_.c:121
msgid "Printer Device:"
msgstr "Dispositivo de impresi�n:"

#: ../printerdrake.pm_.c:125
msgid "Remote lpd Printer Options"
msgstr "Opci�ns impresora remota lpd"

#: ../printerdrake.pm_.c:126
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""
"Para utilizar unha cola de impresi�n remota lpd, � necesario\n"
"que indique o nome do servidor de impresi�n e o nome\n"
"da cola, nese servidor, no que os traballos de impresi�n\n"
"estar�n colocados."

#: ../printerdrake.pm_.c:129
msgid "Remote hostname:"
msgstr "Nome da m�quina remota:"

#: ../printerdrake.pm_.c:129
msgid "Remote queue"
msgstr "Cola de impresi�n remota"

#: ../printerdrake.pm_.c:134
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opci�ns impresora SMB (Windows 9x/NT)"

#: ../printerdrake.pm_.c:135
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"Para imprimir nunha impresora SMB, � necesario escribi-lo\n"
"nome do servidor SMB (que non sempre � o mesmo que o nome da\n"
"m�quina en TCP/IP) e posiblemente a direcci�n IP do servidor de\n"
"impresoras, ademais � necesario o nome do recurso compartido para\n"
"a impresora que se quere usar, as� como calquera nome de usuario,\n"
"grupo de traballo e contrasinal que faga falta."

#: ../printerdrake.pm_.c:140
msgid "SMB server IP:"
msgstr "IP do servidor SMB:"

#: ../printerdrake.pm_.c:140
msgid "SMB server host:"
msgstr "M�quina servidora SMB:"

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "Password:"
msgstr "Contrasinal:"

#: ../printerdrake.pm_.c:141
msgid "Share name:"
msgstr "Nome de recurso compartido:"

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "User name:"
msgstr "Nome de usuario:"

#: ../printerdrake.pm_.c:142
msgid "Workgroup:"
msgstr "Grupo de traballo:"

#: ../printerdrake.pm_.c:157
msgid "NetWare Printer Options"
msgstr "Opci�ns de impresi�n NetWare"

#: ../printerdrake.pm_.c:158
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"Para imprimir  nunha impresora NetWare, � necesario escribi-lo nome\n"
"do servidor de impresi�n NetWare (que non sempre � o mesmo que\n"
"o nome da m�quina en TCP/IP) e posiblemente a direcci�n IP\n"
"do servidor de impresoras, ademais � necesario o nome da cola\n"
"de impresi�n que desexa usar, as� como calquera nome de usuario\n"
"e contrasinal que faga falta."

#: ../printerdrake.pm_.c:162
msgid "Print Queue Name:"
msgstr "Nome da cola de impresi�n:"

#: ../printerdrake.pm_.c:162
msgid "Printer Server:"
msgstr "Servidor de impresoras:"

#: ../printerdrake.pm_.c:173
msgid "Yes, print ASCII test page"
msgstr "Si, imprimir unha p�xina ASCII de proba"

#: ../printerdrake.pm_.c:174
msgid "Yes, print PostScript test page"
msgstr "Si, imprimir unha p�xina PostScript de proba"

#: ../printerdrake.pm_.c:175
msgid "Yes, print both test pages"
msgstr "Si, imprimir �mbalas d�as p�xinas de proba"

#: ../printerdrake.pm_.c:183
msgid "Configure Printer"
msgstr "Configura-la impresora"

#: ../printerdrake.pm_.c:184
msgid "What type of printer do you have?"
msgstr "�Qu� tipo de impresora ten?"

#: ../printerdrake.pm_.c:204
msgid "Printer options"
msgstr "Opci�ns da impresora"

#: ../printerdrake.pm_.c:205
msgid "Paper Size"
msgstr "Tama�o do papel"

#: ../printerdrake.pm_.c:206
msgid "Eject page after job?"
msgstr "�Saca-la p�xina despois da impresi�n?"

#: ../printerdrake.pm_.c:209
msgid "Fix stair-stepping text?"
msgstr "�Correxir o efecto escaleira?"

#: ../printerdrake.pm_.c:212
msgid "Uniprint driver options"
msgstr "Opci�ns do controlador Uniprint"

#: ../printerdrake.pm_.c:213
msgid "Color depth options"
msgstr "Opci�ns da profundidade de cor"

#: ../printerdrake.pm_.c:223
msgid "Do you want to test printing?"
msgstr "�Desexa probar a impresi�n?"

#: ../printerdrake.pm_.c:234
msgid "Printing test page(s)..."
msgstr "Imprimindo a(s) p�xina(s) de proba..."

#: ../printerdrake.pm_.c:252
#, c-format
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Printing status:\n"
"%s\n"
"\n"
"Does it work properly?"
msgstr ""
"A(s) p�xina(s) de proba envi�ronse � servidor de impresi�n.\n"
"Pode que lle leve un pouco ata que a impresora comece.\n"
"Estado da impresi�n:\n"
"%s\n"
"\n"
"�Funciona correctamente?"

#: ../printerdrake.pm_.c:256
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Does it work properly?"
msgstr ""
"A(s) p�xina(s) de proba envi�ronse � servidor de impresi�n.\n"
"Pode que lle leve un pouco ata que a impresora comece.\n"
"�Funciona correctamente?"

#: ../raid.pm_.c:36
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Non se pode engadir unha partici�n � RAID _formatado_ md%d"

#: ../raid.pm_.c:106
msgid "Can't write file $file"
msgstr "Non se pode escribi-lo ficheiro $file"

#: ../raid.pm_.c:146
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Non hai partici�ns de abondo para o nivel RAID %d\n"

#: ../standalone/draksec_.c:28
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa m�is\n"
"sinxelo de utilizar, pero � moi sensible: non debe usarse nunha m�quina\n"
"conectada a outras ou a Internet. Non hai contrasinais de acceso."

#: ../standalone/draksec_.c:31
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"As contrasinais est�n activadas, pero o uso como ordenador de rede a�nda\n"
"non se recomenda."

#: ../standalone/draksec_.c:32
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"Algunhas melloras para este nivel de seguridade, a principal � que hai m�is\n"
"avisos e comprobaci�ns de seguridade."

#: ../standalone/draksec_.c:34
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"Esta � a seguridade recomendada para un ordenador que se usar� para\n"
"conectarse a Internet como cliente. Agora hai m�s comprobaci�ns de "
"seguridade."

#: ../standalone/draksec_.c:36
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"Con este nivel de seguridade, � posible usar este sistema coma servidor.\n"
"A seguridade � agora alta de abondo para usa-lo sistema coma un servidor\n"
"que acepta conexi�ns de moitos clientes."

#: ../standalone/draksec_.c:39
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"T�manse caracter�sticas do nivel 4, pero agora o sistema est� completamente\n"
"pechado. As caracter�sticas de seguridade est�n � seu m�ximo."

#: ../standalone/draksec_.c:49
msgid "Setting security level"
msgstr "Establecendo o nivel de seguridade"

#: ../standalone/drakxconf_.c:21
msgid "Choose the tool you want to use"
msgstr "Elixa a utilidade que quere usar"

#: ../standalone/drakxservices_.c:21
msgid "Choose which services should be automatically started at boot time"
msgstr "Escolle-los servicios a lanzar � arrinca-lo sistema"

#: ../standalone/mousedrake_.c:30
msgid "no serial_usb found\n"
msgstr "non se atopou ning�n serial_usb\n"

#: ../standalone/mousedrake_.c:35
msgid "Emulate third button?"
msgstr "�Emula-lo terceiro bot�n?"

#: ../standalone/rpmdrake_.c:25
#, fuzzy
msgid "reading configuration"
msgstr "Proba-la configuraci�n"

#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
#: ../standalone/rpmdrake_.c:253
msgid "File"
msgstr ""

#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
msgid "Search"
msgstr ""

#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
msgid "Package"
msgstr "Paquete"

#: ../standalone/rpmdrake_.c:51
#, fuzzy
msgid "Text"
msgstr "experto"

#: ../standalone/rpmdrake_.c:53
#, fuzzy
msgid "Tree"
msgstr "Grego"

#: ../standalone/rpmdrake_.c:54
msgid "Sort by"
msgstr ""

#: ../standalone/rpmdrake_.c:55
msgid "Category"
msgstr ""

#: ../standalone/rpmdrake_.c:58
#, fuzzy
msgid "See"
msgstr "Servidor"

#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
#, fuzzy
msgid "Installed packages"
msgstr "Instalando o paquete %s"

#: ../standalone/rpmdrake_.c:60
#, fuzzy
msgid "Available packages"
msgstr "Buscando os paquetes dispo�ibles"

#: ../standalone/rpmdrake_.c:62
msgid "Show only leaves"
msgstr ""

#: ../standalone/rpmdrake_.c:67
msgid "Expand all"
msgstr ""

#: ../standalone/rpmdrake_.c:68
#, fuzzy
msgid "Collapse all"
msgstr "Borrar todas"

#: ../standalone/rpmdrake_.c:70
#, fuzzy
msgid "Configuration"
msgstr "Proba-la configuraci�n"

#: ../standalone/rpmdrake_.c:71
msgid "Add location of packages"
msgstr ""

#: ../standalone/rpmdrake_.c:75
msgid "Update location"
msgstr ""

#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
#, fuzzy
msgid "Remove"
msgstr "Quitar entrada"

#: ../standalone/rpmdrake_.c:100
msgid "Configuration: Add Location"
msgstr ""

#: ../standalone/rpmdrake_.c:101
msgid "Expand Tree"
msgstr ""

#: ../standalone/rpmdrake_.c:102
msgid "Collapse Tree"
msgstr ""

#: ../standalone/rpmdrake_.c:103
#, fuzzy
msgid "Find Package"
msgstr "Paquete err�neo"

#: ../standalone/rpmdrake_.c:104
msgid "Find Package containing file"
msgstr ""

#: ../standalone/rpmdrake_.c:105
msgid "Toggle between Installed and Available"
msgstr ""

#: ../standalone/rpmdrake_.c:139
msgid "Files:\n"
msgstr ""

#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
#, fuzzy
msgid "Uninstall"
msgstr "Instalar"

#: ../standalone/rpmdrake_.c:163
#, fuzzy
msgid "Choose package to install"
msgstr "Elixa paquetes a instalar"

#: ../standalone/rpmdrake_.c:190
msgid "Checking dependencies"
msgstr ""

#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
msgid "Wait"
msgstr ""

#: ../standalone/rpmdrake_.c:209
#, fuzzy
msgid "The following packages are going to be uninstalled"
msgstr "Elixa paquetes a instalar"

#: ../standalone/rpmdrake_.c:210
#, fuzzy
msgid "Uninstalling the RPMs"
msgstr "Instalando o paquete %s"

#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
msgid "Regexp"
msgstr ""

#: ../standalone/rpmdrake_.c:229
msgid "Which package are looking for"
msgstr ""

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
#, c-format
msgid "%s not found"
msgstr ""

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
msgid "No match"
msgstr ""

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
msgid "No more match"
msgstr ""

#: ../standalone/rpmdrake_.c:246
msgid ""
"rpmdrake is currently in ``low memory'' mode.\n"
"I'm going to relaunch rpmdrake to allow searching files"
msgstr ""

#: ../standalone/rpmdrake_.c:253
msgid "Which file are you looking for"
msgstr ""

#: ../standalone/rpmdrake_.c:269
msgid "What are looking for"
msgstr ""

#: ../standalone/rpmdrake_.c:289
msgid "Give a name (eg: `extra', `commercial')"
msgstr ""

#: ../standalone/rpmdrake_.c:291
#, fuzzy
msgid "Directory"
msgstr "Sector"

#: ../standalone/rpmdrake_.c:294
msgid "No cdrom available (nothing in /mnt/cdrom)"
msgstr ""

#: ../standalone/rpmdrake_.c:298
msgid "URL of the directory containing the RPMs"
msgstr ""

#: ../standalone/rpmdrake_.c:299
msgid ""
"For FTP and HTTP, you need to give the location for hdlist\n"
"It must be relative to the URL above"
msgstr ""

#: ../standalone/rpmdrake_.c:302
msgid "Please submit the following information"
msgstr ""

#: ../standalone/rpmdrake_.c:304
#, fuzzy, c-format
msgid "%s is already in use"
msgstr "Esta etiqueta xa se est� a usar"

#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
#: ../standalone/rpmdrake_.c:329
msgid "Updating the RPMs base"
msgstr ""

#: ../standalone/rpmdrake_.c:328
#, fuzzy, c-format
msgid "Going to remove entry %s"
msgstr "Quitar entrada"

#: ../standalone/rpmdrake_.c:360
msgid "Finding leaves"
msgstr ""

#: ../standalone/rpmdrake_.c:360
msgid "Finding leaves takes some time"
msgstr ""

#~ msgid "Polish"
#~ msgstr "Polaco"

#~ msgid "Going to install %d MB. You can choose to install more programs"
#~ msgstr "Vanse instalar %d MB. Vostede pode instalar m�is programas"