# translation of DrakX-gl.po to Galician
# Jesús Bravo Álvarez (mdk) <jba@pobox.com>, 2001
# Leandro Regueiro <unho@gulo.org>, 2004, 2005
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-gl\n"
"POT-Creation-Date: 2005-10-28 23:26+0800\n"
"PO-Revision-Date: 2005-09-10 13:26+0100\n"
"Last-Translator: Leandro Regueiro <unho@gulo.org>\n"
"Language-Team: Galician <gpul-traduccion@ceu.fi.udc.es>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
"X-Poedit-Language: Gallegan\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Que memoria USB desexa formatar?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Está a piques de formatar un dispositivo USB \"%s\". Isto eliminará tódolos "
"datos que hai nel.\n"
"Asegúrese de que o dispositivo seleccionado é a memoria USB que quere "
"formatar. \n"
"Aconsellámoslle que desenchufe tódolos outros dispositivos de almacenamento "
"USB mentres fai esta operación."

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Non se pode escribir na memoria"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Semella ser que a memoria USB ten activada a protección de escritura.\n"
"Desenchúfea, desactive a protección de escritura, e volva enchufala."

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Reintentar"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Continuar sen a memoria USB"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Semella ser que a memoria USB ten activada a protección de escritura, pero\n"
"non se pode desenchufar de maneira segura.\n"
"\n"
"\n"
"Clique no botón para reiniciar a máquina, desenchúfea, desactive a "
"protección\n"
"de escritura, enchufe a memoria outra vez, e execute Mandriva Move outra vez."

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
#, c-format
msgid "Reboot"
msgstr "Reiniciar"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"A súa memoria USB non ten ningunha partición Windows (FAT)\n"
"válida. Cómpre unha para continuar (ademais, é máis estándar así\n"
"que poderá mover e acceder ós seus ficheiros dende máquinas\n"
"que executen Windows). Enchufe unha memoria USB que\n"
"conteña unha partición Windows.\n"
"\n"
"\n"
"Tamén pode continuar sen unha memoria USB - ainda\n"
"poderá usar Mandriva Move coma un Sistema Operativo\n"
"Mandriva live normal."

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Cómpre unha memoria para gardar os seus datos"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Detectar a memoria USB outra vez"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Configurando memoria USB"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Agarde, configurando os ficheiros de configuración do sistema na memoria "
"USB..."

#: ../move/move.pm:546
#, fuzzy, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Introduza a súa información de usuario, o contrasinal usarase para o "
"salvapantallas"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Auto configuración"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Por favor agarde. detectando e configurando os dispositivos..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1777
#: install_any.pm:1829 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:833 network/netconnect.pm:862
#: network/netconnect.pm:962 network/netconnect.pm:966
#: network/netconnect.pm:970 network/netconnect.pm:975
#: network/netconnect.pm:1120 network/netconnect.pm:1124
#: network/netconnect.pm:1243 network/netconnect.pm:1248
#: network/netconnect.pm:1268 network/netconnect.pm:1427
#: network/thirdparty.pm:319 network/thirdparty.pm:326
#: network/thirdparty.pm:370 network/thirdparty.pm:372
#: network/thirdparty.pm:393 network/thirdparty.pm:417
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1603 printer/printerdrake.pm:1640
#: printer/printerdrake.pm:1685 printer/printerdrake.pm:1689
#: printer/printerdrake.pm:1703 printer/printerdrake.pm:1795
#: printer/printerdrake.pm:1876 printer/printerdrake.pm:1880
#: printer/printerdrake.pm:1884 printer/printerdrake.pm:1933
#: printer/printerdrake.pm:1991 printer/printerdrake.pm:1995
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2129
#: printer/printerdrake.pm:2133 printer/printerdrake.pm:2176
#: printer/printerdrake.pm:2249 printer/printerdrake.pm:2267
#: printer/printerdrake.pm:2276 printer/printerdrake.pm:2285
#: printer/printerdrake.pm:2296 printer/printerdrake.pm:2360
#: printer/printerdrake.pm:2511 printer/printerdrake.pm:2924
#: printer/printerdrake.pm:3208 printer/printerdrake.pm:3214
#: printer/printerdrake.pm:3779 printer/printerdrake.pm:3783
#: printer/printerdrake.pm:3787 printer/printerdrake.pm:4183
#: printer/printerdrake.pm:4424 printer/printerdrake.pm:4452
#: printer/printerdrake.pm:4529 printer/printerdrake.pm:4595
#: printer/printerdrake.pm:4715 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1581 standalone/drakTermServ:1589
#: standalone/drakTermServ:1594 standalone/drakTermServ:1602
#: standalone/drakTermServ:1618 standalone/drakTermServ:1638
#: standalone/drakauth:36 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Erro"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Ocorreu un erro, e o programa non sabe como manexalo de\n"
"maneira limpa. Continúe baixo a súa propia responsabilidade."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Ocorreu un erro"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Eliminando os ficheiros de configuración do sistema"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Só reiniciar"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Só pode traballar sen soporte para CDROM"

#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "Programa de debuxo"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Sen soporte para CDROM"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "¡Lea con moita atención!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Non pode usar outro CDROM cando se estean executando os seguintes "
"programas: \n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Copiando á memoria para permitir a extracción do CDROM"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 KB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 KB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB ou máis"

#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "Servidor X"

#: Xconfig/card.pm:163
#, c-format
msgid "Choose an X server"
msgstr "Elixa un servidor X"

#: Xconfig/card.pm:195
#, fuzzy, c-format
msgid "Multi-head configuration"
msgstr "lendo a configuración"

#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""

#: Xconfig/card.pm:265
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Non se puido instala-lo paquete Xorg: %s"

#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Seleccione a cantidade de memoria da súa tarxeta gráfica"

#: Xconfig/card.pm:367
#, c-format
msgid "Xorg configuration"
msgstr "Configuración de Xorg"

#: Xconfig/card.pm:369
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "¿Que configuración de Xorg quere usar?"

#: Xconfig/card.pm:402
#, c-format
msgid "Configure all heads independently"
msgstr ""

#: Xconfig/card.pm:403
#, c-format
msgid "Use Xinerama extension"
msgstr "Usar extensión Xinerama"

#: Xconfig/card.pm:408
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configurar só a tarxeta \"%s\"%s"

#: Xconfig/card.pm:420 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:427 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s con aceleración 3D por hardware"

#: Xconfig/card.pm:429
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
"A súa tarxeta pode ter soporte de aceleración 3D por hardware con Xorg %s."

#: Xconfig/card.pm:435
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s con aceleración 3D por hardware EXPERIMENTAL"

#: Xconfig/card.pm:437
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
"Xorg %s, TEÑA EN CONTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O "
"SISTEMA."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
#, c-format
msgid "Custom"
msgstr "Personalizado"

#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4524 printer/printerdrake.pm:4988
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Saír"

#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Tarxeta Gráfica"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Monitor"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Resolución"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Proba"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:494
#: standalone/drakfont:556
#, c-format
msgid "Options"
msgstr "Opcións"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "O seu ficheiro de configuración de Xorg está corrompido, ignorarase."

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"¿Manter os cambios?\n"
"A configuración actual é:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "Escolla un monitor"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Escolla un monitor"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Xenérico"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Vendedor"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Os dous parámetros críticos son a taxa de actualización vertical, que\n"
"indica a frecuencia ca que se actualiza a pantalla completa, e máis\n"
"importante aínda é a taxa de sincronismo horizontal, que é a\n"
"frecuencia ca que se mostran as liñas de barrido horizontal.\n"
"\n"
"É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
"de frecuencias de sincronismo superior á capacidade real do seu monitor,\n"
"xa que pode danalo.\n"
"No caso de dúbida, escolla unha configuración conservadora."

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Frecuencia de actualización horizontal"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Frecuencia de actualización vertical"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 cores (8 bits)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mil cores (15 bits)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mil cores (16 bits)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 millóns de cores (24 bits)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Resolucións"

#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Outros"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Escolla a resolución e a profundidade de cor"

#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Tarxeta gráfica: %s"

#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "Aceptar"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Cancelar"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Axuda"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Proba da configuración"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "¿Desexa proba-la configuración?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Advertencia: probar esta tarxeta gráfica pode colgar o ordenador"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Ocorreu un erro:\n"
"%s\n"
"Inténteo trocando algún parámetro"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Saíndo en %d segundos"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "É isto correcto?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Disposición do teclado: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tipo de rato: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Dispositivo do rato: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Frecuencia horizontal do monitor: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Frecuencia vertical do monitor: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Tarxeta gráfica: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memoria da tarxeta gráfica: %s KB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Profundidade de cor: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Resolución: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Controlador de Xorg: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Lanzar a interface gráfica ó arrincar"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Pódese configurar o seu ordenador para que entre automaticamente\n"
"en a interface gráfica ó arrincar.\n"
"¿Desexa que se execute X ó reiniciar?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Semella ser que a súa tarxeta gráfica ten un conector TV-OUT.\n"
"Pode configurarse para traballar usando frame-buffer.\n"
"\n"
"Para isto ten que conectar a súa tarxeta gráfica á súa TV antes de arrincar "
"o ordenador.\n"
"Despois escolla a entrada \"TVout\" no cargador de arrinque\n"
"\n"
"Ten esta funcionalidade?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Que norma usa a súa TV?"

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "outro"

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:208
#, c-format
msgid "Please wait"
msgstr "Por favor, agarde"

#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Instalando o cargador de arrinque"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "A instalación do cargador de arrinque fallou. Ocorreu o seguinte erro:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Decidiu instala-lo cargador de arrinque nunha partición.\n"
"Isto implica que xa ten un cargador de arrinque no disco duro que está "
"arrincando (p.ex.: System Commander).\n"
"\n"
"¿Dende qué unidade está arrincando?"

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Primeiro sector do disco (MBR)"

#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Primeiro sector da partición raiz"

#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "Nun Disquete"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "Omitir"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalación do LILO/grub"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "¿Onde quere instala-lo cargador de arrinque?"

#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Configuración do Estilo de Arrinque"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Opcións principais do cargador de arrinque"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Indique o tamaño da memoria RAM en MB"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"A opción ``Restrinxir opcións da liña de comandos'' non ten sentido sen "
"contrasinal"

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Os contrasinais non coinciden"

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "Por favor, inténteo de novo"

#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Cargador de arrinque que se usará"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Dispositivo de arrinque"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Retardo antes de arrinca-la imaxe por omisión"

#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Activar ACPI"

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr ""

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr ""

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Contrasinal"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Contrasinal (de novo)"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "Restrinxir opcións da liña de comandos"

#: any.pm:296
#, c-format
msgid "restrict"
msgstr "restrinxir"

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Baleirar /tmp en cada arrinque"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Tamaño exacto da memoria RAM se for necesario (atopáronse %d MB)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "Mensaxe Inicial"

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr ""

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""

#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "¿Permiti-lo arrinque dende un CD?"

#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr ""

#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "¿S.O. por omisión?"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "Imaxe"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Raíz"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Agregar"

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Modo de video"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "Perfil de rede"

#: any.pm:385 any.pm:390 any.pm:392
#, c-format
msgid "Label"
msgstr "Etiqueta"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Por omisión"

#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr ""

#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr ""

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Etiqueta baleira non permitida"

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Debe especificar unha imaxe do kernel"

#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Debe especificar unha partición raíz"

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Esta etiqueta xa se está usando"

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "¿Qué tipo de entrada desexa engadir?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Outros S.O. (SunOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Outros S.O. (MacOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Outros S.O. (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Estas son as diferentes entradas.\n"
"Pode engadir algunhas máis ou cambia-las que xa existen."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "acceso ós programas X"

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "acceso ás ferramentas rpm"

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "permitir \"su\""

#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "acceso ós ficheiros de administración"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "acceso ás ferramentas de rede"

#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "acceso ás ferramentas de compilación"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(%s xa foi engadido)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Este contrasinal é demasiado simple"

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Por favor, indique un nome de usuario"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"O nome de usuario (login) só pode conter letras minúsculas, números, '-' e "
"'_'"

#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "O nome de usuario é moi longo"

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Este nome de usuario xa está engadido"

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID de Usuario"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "ID do Grupo"

#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr "%s debe ser un número"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "Engadir usuario"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Introduza un usuario\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4988
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Feito"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Aceptar usuario"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Nome real"

#: any.pm:649 standalone/drakbackup:1634
#, c-format
msgid "Login name"
msgstr "Nome de usuario"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Shell"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Icona"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Login automático"

#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Pódese configurar o ordenador para que entre automáticamente\n"
"un usuario determinado."

#: any.pm:705
#, c-format
msgid "Use this feature"
msgstr "Usar esta funcionalidade"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Escolla o usuario por defecto:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Escolla o xestor de fiestras que se executará:"

#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "Por favor, escolla a lingua que desexe usar."

#: any.pm:720 any.pm:788
#, c-format
msgid "Language choice"
msgstr "Selección da Lingua"

#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux pode soportar múltiples linguas. Seleccione\n"
"as linguas que desexa instalar. Esta linguas estarán dispoñibles\n"
"cando a instalación estea completa e reinicie o seu sistema."

#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr ""

#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Usar Unicode por omisión"

#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "Tódalas linguas"

#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
#, c-format
msgid "Country / Region"
msgstr "País"

#: any.pm:842
#, c-format
msgid "Please choose your country."
msgstr "Por favor, escolla o seu país."

#: any.pm:844
#, c-format
msgid "Here is the full list of available countries"
msgstr "Esta é a lista completa dos paises dispoñibles"

#: any.pm:845
#, c-format
msgid "Other Countries"
msgstr "Outros Paises"

#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Avanzado"

#: any.pm:853
#, c-format
msgid "Input method:"
msgstr "Método de entrada:"

#: any.pm:856 install_any.pm:423 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1234 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "Ningún"

#: any.pm:973
#, c-format
msgid "No sharing"
msgstr "Non compartir"

#: any.pm:973
#, c-format
msgid "Allow all users"
msgstr "Permitirlle a tódolos usuarios"

#: any.pm:977
#, fuzzy, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Desexa permitir que os usuarios compartan algúns dos seus directorios?\n"
"Se permite isto deixará que os usuarios simplemente cliquen en \"Compartir\" "
"en konqueror e en nautilus.\n"
"\n"
"\"Personalizado\" permite especificalo usuario a usuario.\n"

#: any.pm:989
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: o sistema tradicional de compartimento de ficheiros de Unix, con menos "
"soporte en Mac e Windows."

#: any.pm:992
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: un sistema de compartimento de ficheiros que se usa en sistemas "
"Windows, Mac OS X e varios Linux modernos."

#: any.pm:1000
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "Pode exportar usando NFS ou SMB. Por favor, escolla cal quere usar."

#: any.pm:1025
#, c-format
msgid "Launch userdrake"
msgstr "Executar userdrake"

#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5306 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Pechar"

#: any.pm:1027
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"O compartimento por usuario usa o grupo \"fileshare\". \n"
"Pode usar userdrake para engadir un usuario a este grupo."

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Ficheiro local"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Tarxeta Smart"

#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "Dominio Windows"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Directorio Activo con SFU"

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Directorio Activo con Winbind"

#: authentication.pm:66
#, c-format
msgid "Local file:"
msgstr "Ficheiro local:"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "Dominio Windows:"

#: authentication.pm:69
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"Winbind permítelle ó sistema recuperar información e autenticar os usuarios "
"nun dominio Windows."

#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr "Directorio Activo con SFU:"

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr ""
"Con Kerberos e Ldap para autenticación nun Servidor de Active Directory"

#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Directorio Activo con Winbind:"

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""
"Winbind permítelle ó sistema autenticar usuarios nun Servidor Windows de "
"Active Directory."

#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "Autenticación LDAP"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "Servidor LDAP"

#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "simple"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""

#: authentication.pm:121 authentication.pm:159
#, c-format
msgid "Authentication Active Directory"
msgstr "Autenticación nun Directorio Activo"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Dominio"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Servidor"

#: authentication.pm:125
#, c-format
msgid "LDAP users database"
msgstr "Base de datos de usuarios LDAP"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr "Usar BIND anónimo"

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "Usuario LDAP con permiso para navegar polo Directorio Activo"

#: authentication.pm:128
#, c-format
msgid "Password for user"
msgstr "Contrasinal para o usuario"

#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "Autenticación NIS"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "Dominio NIS"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "Servidor NIS"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autenticación nun Dominio Windows"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr ""

#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr "Nome de Usuario do Administrador do Dominio"

#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr "Contrasinal do Administrador do Dominio"

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"Configurar o contrasinal do administrador (root) e os métodos de "
"autenticación de rede"

#: authentication.pm:182
#, c-format
msgid "Set administrator (root) password"
msgstr "Estableza o contrasinal do administrador (root)"

#: authentication.pm:183 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Método de autenticación"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "Sen contrasinal"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"

#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Autenticación"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Benvido o selector de sistema operativo!\n"
"\n"
"Escolla un sistema operativo na lista de enriba, ou\n"
"agarde a que arrinque o sistema por defecto.\n"
"\n"

#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO con menú gráfico"

#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr "LILO con menú de texto"

#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr "GRUB con menú gráfico"

#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr "GRUB con menú de texto"

#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "non hai espacio dabondo en /boot"

#: bootloader.pm:1480
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Non se pode instala-lo cargador de arrinque nunha partición %s\n"

#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"A configuración do seu cargador de arrinque ten que actualizarse porque "
"cambiou o número da partición"

#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Non se puido instalar de xeito correcto o cargador de arrinque. Ten que "
"arrincar co disco de rescate e elixir \"%s\""

#: bootloader.pm:1534
#, c-format
msgid "Re-install Boot Loader"
msgstr "Reinstala-lo Cargador de Arrinque"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d minutos"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 minuto"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d segundos"

#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "falla o kdesu"

#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Austria"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Australia"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Bélxica"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brasil"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Canadá"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Suíza"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "República Checa"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Alemaña"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Dinamarca"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estonia"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "España"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Finlandia"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Francia"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grecia"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Hungría"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irlanda"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Israel"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italia"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Xapón"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Países Baixos"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Noruega"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Nova Celandia"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Polonia"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugal"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Rusia"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Suecia"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Eslovaquia"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Tailandia"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Taiwán"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Sudáfrica"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Estados Unidos"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV é un protocolo que permite montar un directorio dun servidor web\n"
"de maneira local, e tratalo coma un sistema de ficheiros local (se o "
"servidor web\n"
"está configurado coma un servidor WebDAV). Se desexa engadir puntos de\n"
"montaxe WebDAV, seleccione \"Novo\"."

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Novo"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Desmontar"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Montar"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Punto de montaxe"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Por favor, introduza a URL do servidor WebDAV"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "A URL debe comezar con http:// ou https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Servidor: "

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "Punto de montaxe: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, c-format
msgid "Options: %s"
msgstr "Opcións: %s"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Faga primeiro unha copia de seguridade dos seus datos"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Se ten pensado usar aboot, teña coidado de deixar un espacio libre (2048\n"
"sectores abondan) no comezo do disco"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Asistente"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Escolla unha acción"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Ten unha partición grande con Microsoft Windows.\n"
"Aconséllase que primeiro a redimensione\n"
"(clique nela, e logo en \"Redimensionar\")"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Por favor, clique nunha partición"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr "Detalles"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Non se atoparon unidades de disco duro"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, fuzzy, c-format
msgid "Journalised FS"
msgstr "mount fallou"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Intercambio"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "Baleiro"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Tipos de sistemas de ficheiros:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Usar ``%s'' no seu lugar"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "Crear"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Tipo"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Eliminar"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Usar ``Desmontar'' primeiro"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Escolla outra partición"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Escolla unha partición"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Sair"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Refacer"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Cambiar a modo normal"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Cambiar a modo experto"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "¿Continuar de calquera xeito?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Sair sen gardar"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "¿Saír do programa sen garda-la táboa de particións?"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "¿Desexa garda-las modificacións de /etc/fstab?"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Necesita reinicia-lo equipo para que a modificación da táboa\n"
"de particións se tome en conta"

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Debe formatar a partición %s.\n"
"Doutro xeito non se escribirá unha entrada para o punto de montaxe %s no "
"fstab.\n"
"Desexa saír?"

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Borrar todas"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Asignación automática"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "Máis"

#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Información da unidade de disco duro"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Estanse usando tódalas particións primarias"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Non é posible engadir máis particións"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Para ter máis particións, borre unha para poder crear unha partición "
"extendida"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr "Sen supermount"

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr "Supermount"

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "Supermount agás para as unidades de CDROM"

#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Garda-la táboa de particións"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Restaura-la táboa de particións"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Recupera-la táboa de particións"

#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Recarga-la táboa de particións"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Montar automáticamente os soportes extraíbles"

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Seleccione un ficheiro"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"A táboa de particións de rescate non ten o\n"
"mesmo tamaño.  ¿Continuar de tódolos xeitos?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Intentando recupera-la táboa de particións"

#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Información detallada"

#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "Redimensionar"

#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "Formatar"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "Engadir ó RAID"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "Engadir ó LVM"

#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "Quitar do RAID"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "Quitar do LVM"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "Modifica-lo RAID"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "Usar para loopback"

#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "Crear unha nova partición"

#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "Sector inicial: "

#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "Tamaño en MB: "

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "Tipo de sistema de ficheiros: "

#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "Preferencia: "

#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "Nome do volume lóxico "

#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Non pode crear unha nova partición\n"
"(xa que alcanzou o número máximo de particións primarias).\n"
"Elimine primeiro unha partición primaria e cree unha partición extendida."

#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "Eliminar o ficheiro de loopback?"

#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Ó cambia-lo tipo de partición %s, perderanse tódolos datos da partición"

#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "Cambia-lo tipo de partición"

#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "¿Qué sistema de ficheiros desexa?"

#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Cambiando de ext2 a ext3"

#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Onde desexa monta-lo ficheiro de loopback %s?"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "¿Onde desexa monta-lo dispositivo %s?"

#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Non se pode quita-lo punto de montaxe porque esta partición estase a\n"
"usar para loopback.\n"
"Quite primeiro o loopback"

#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "¿Onde desexa montar %s?"

#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Redimensionando"

#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Calculando os límites do sistema de ficheiros FAT"

#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "Esta partición non se pode redimensionar"

#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
"Debería facer unha copia de seguridade de tódolos datos desta partición"

#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Ó redimensiona-la partición %s, perderanse tódolos datos da partición"

#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "Escolla o novo tamaño"

#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "Novo tamaño en MB: "

#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Para asegurar a integridade dos datos despois de redimensionar a(s) partición"
"(s), \n"
"executaranse unhas verificacións do sistema de ficheiros a próxima vez que "
"arrinque Windows(TM)"

#: diskdrake/interactive.pm:843
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Escolla un dos RAID para engadirlla"

#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
#, c-format
msgid "new"
msgstr "novo"

#: diskdrake/interactive.pm:860
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Escolla un dos LVM para engadirlla"

#: diskdrake/interactive.pm:866
#, c-format
msgid "LVM name?"
msgstr "¿Nome do LVM?"

#: diskdrake/interactive.pm:894
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:896
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:914
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Esta partición non pode usarse para loopback"

#: diskdrake/interactive.pm:927
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback file name: "
msgstr "Nome do ficheiro loopback: "

#: diskdrake/interactive.pm:933
#, c-format
msgid "Give a file name"
msgstr "Introduza un nome de ficheiro"

#: diskdrake/interactive.pm:936
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro"

#: diskdrake/interactive.pm:937
#, c-format
msgid "File already exists. Use it?"
msgstr "O ficheiro xa existe. ¿Quere usalo?"

#: diskdrake/interactive.pm:960
#, c-format
msgid "Mount options"
msgstr "Opcións de montaxe"

#: diskdrake/interactive.pm:967
#, c-format
msgid "Various"
msgstr ""

#: diskdrake/interactive.pm:1034
#, c-format
msgid "device"
msgstr "dispositivo"

#: diskdrake/interactive.pm:1035
#, c-format
msgid "level"
msgstr "nivel"

#: diskdrake/interactive.pm:1036
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "tamaño do bloque de datos"

#: diskdrake/interactive.pm:1053
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Teña coidado: esta operación é perigosa."

#: diskdrake/interactive.pm:1068
#, c-format
msgid "What type of partitioning?"
msgstr "¿Qué tipo de particionamento quere?"

#: diskdrake/interactive.pm:1106
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"Necesitará reiniciar o equipo para que a modificación sexa tomada en conta"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "¡Escribirase no disco a táboa de particións da unidade %s!"

#: diskdrake/interactive.pm:1138
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Ó formata-la partición %s, perderanse tódolos datos da partición"

#: diskdrake/interactive.pm:1154
#, c-format
msgid "Move files to the new partition"
msgstr "Despraza-los ficheiros á nova partición"

#: diskdrake/interactive.pm:1154 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr "Agocha-los ficheiros"

#: diskdrake/interactive.pm:1155
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"O directorio %s xa contén datos\n"
"(%s)"

#: diskdrake/interactive.pm:1166
#, c-format
msgid "Moving files to the new partition"
msgstr "Desprazando os ficheiros á nova partición"

#: diskdrake/interactive.pm:1170
#, c-format
msgid "Copying %s"
msgstr "Copiando %s"

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Removing %s"
msgstr "Eliminando %s"

#: diskdrake/interactive.pm:1188
#, c-format
msgid "partition %s is now known as %s"
msgstr "o nome da partición %s é %s"

#: diskdrake/interactive.pm:1189
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""

#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
#, c-format
msgid "Device: "
msgstr "Dispositivo: "

#: diskdrake/interactive.pm:1210
#, c-format
msgid "Devfs name: "
msgstr "Nome devfs: "

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Volume label: "
msgstr "Etiqueta de volume:"

#: diskdrake/interactive.pm:1212
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Letra de unidade DOS: %s (aproximación)\n"

#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
#: diskdrake/interactive.pm:1289
#, c-format
msgid "Type: "
msgstr "Tipo: "

#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Nome: "

#: diskdrake/interactive.pm:1227
#, c-format
msgid "Start: sector %s\n"
msgstr "Inicio: sector %s\n"

#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s"
msgstr "Tamaño: %s"

#: diskdrake/interactive.pm:1230
#, c-format
msgid ", %s sectors"
msgstr ", %s sectores"

#: diskdrake/interactive.pm:1232
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilindros %d a %d\n"

#: diskdrake/interactive.pm:1233
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1234
#, c-format
msgid "Formatted\n"
msgstr "Formatado\n"

#: diskdrake/interactive.pm:1235
#, c-format
msgid "Not formatted\n"
msgstr "Non formatado\n"

#: diskdrake/interactive.pm:1236
#, c-format
msgid "Mounted\n"
msgstr "Montado\n"

#: diskdrake/interactive.pm:1237
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1242
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Ficheiro(s) de loopback:\n"
"   %s\n"

#: diskdrake/interactive.pm:1243
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partición de arrinque por omisión\n"
"    (para arrincar en MS-DOS, non para lilo)\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"

#: diskdrake/interactive.pm:1246
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "Tamaño do bloque de datos %d\n"

#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discos RAID %s\n"

#: diskdrake/interactive.pm:1249
#, c-format
msgid "Loopback file name: %s"
msgstr "Nome do ficheiro loopback: %s"

#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""

#: diskdrake/interactive.pm:1255
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Esta partición Bootstrap\n"
"especial é para o\n"
"arrinque dual do seu sistema.\n"

#: diskdrake/interactive.pm:1272
#, c-format
msgid "Read-only"
msgstr "Só Lectura"

#: diskdrake/interactive.pm:1273
#, c-format
msgid "Size: %s\n"
msgstr "Tamaño: %s\n"

#: diskdrake/interactive.pm:1274
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n"

#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
#, c-format
msgid "Info: "
msgstr "Información: "

#: diskdrake/interactive.pm:1276
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discos LVM %s\n"

#: diskdrake/interactive.pm:1277
#, c-format
msgid "Partition table type: %s\n"
msgstr "Tipo de táboa de particións: %s\n"

#: diskdrake/interactive.pm:1278
#, c-format
msgid "on channel %d id %d\n"
msgstr "na canle %d id %d\n"

#: diskdrake/interactive.pm:1321
#, c-format
msgid "Filesystem encryption key"
msgstr "Clave de cifrado do sistema de ficheiros"

#: diskdrake/interactive.pm:1322
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Escolla a clave de cifrado do seu sistema de ficheiros"

#: diskdrake/interactive.pm:1325
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Esta clave de cifrado é moi sinxela (ten que ter polo menos %d caracteres)"

#: diskdrake/interactive.pm:1326
#, c-format
msgid "The encryption keys do not match"
msgstr "As claves de cifrado non coinciden"

#: diskdrake/interactive.pm:1329 network/netconnect.pm:1070
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "Clave de cifrado"

#: diskdrake/interactive.pm:1330
#, c-format
msgid "Encryption key (again)"
msgstr "Clave de cifrado (outra vez)"

#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Algoritmo de cifrado"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Cambia-lo tipo"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""
"Non se puido entrar usando o nome de usuario %s (¿era o contrasinal "
"correcto?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Autenticación no Dominio Requirida"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Qué nome de usuario"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Outro"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Por favor introduza o seu nome de usuario, contrasinal e nome de dominio "
"para acceder a este servidor."

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "Nome de usuario"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Buscar servidores"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Buscar novos servidores"

#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Necesitase instala-lo paquete %s. ¿Desexa instalalo?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, c-format
msgid "Could not install the %s package!"
msgstr "¡Non se puido instala-lo paquete %s!"

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Falta o paquete obrigatorio %s"

#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4308
#: printer/printerdrake.pm:5465 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Advertencia"

#: do_pkgs.pm:35 standalone/harddrake2:527
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Cómpre instala-los seguintes paquetes:\n"

#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "Instalando paquetes..."

#: do_pkgs.pm:252
#, c-format
msgid "Removing packages..."
msgstr "Eliminando paquetes..."

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "Formatando a partición %s"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "Creando e formatando o ficheiro %s"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Descoñécese o xeito de formatar %s de tipo %s"

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "O formato %s de %s fallou"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Puntos de montaxe circulares %s\n"

#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr "Montando a partición %s"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "fallo ó monta-la partición %s no directorio %s"

#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr "Comprobando %s"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "erro desmontando %s: %s"

#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr "Activando a partición de intercambio %s"

#: fs/mount_options.pm:111
#, c-format
msgid "Use an encrypted file system"
msgstr "Usar un sistema de ficheiros cifrado"

#: fs/mount_options.pm:113
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:115
#, fuzzy, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Non actualizar as horas de acceso ó inodos neste sistema de ficheiros\n"
"(p.ex, para un acceso máis rápido      on the news spool to speed up news "
"servers)."

#: fs/mount_options.pm:118
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Só se poderá montar explícitamente (p.ex.,\n"
"a opción -a non fará que o sistema de ficheiros se monte)."

#: fs/mount_options.pm:121
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
"Non interpretar os dispositivos de caracter ou bloque especiais no sistema "
"de ficheiros."

#: fs/mount_options.pm:123
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Non permitir a execución de binarios no sistema de ficheiros que\n"
"se montou. Esta opción pode ser útil para un servidor que ten sistemas de "
"ficheiros\n"
"que conteñen binarios para arquitecturas diferentes da súa."

#: fs/mount_options.pm:127
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:131
#, c-format
msgid "Mount the file system read-only."
msgstr "Monta-lo sistema de ficheiros coma de só lectura."

#: fs/mount_options.pm:133
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
"Toda a E/S do sistema de ficheiros debe facerse de maneira sincronizada."

#: fs/mount_options.pm:137
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr "Darlle acceso de escritura ós usuarios normais"

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Darlle acceso de só lectura ós usuarios normais"

#: fs/type.pm:363
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Non pode usar JFS para particións máis pequenas de 16MB"

#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Non pode usar ReiserFS para particións máis pequenas de 32MB"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "con /usr"

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "servidor"

#: fsedit.pm:217
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Non se pode le-la táboa de particións do dispositivo %s, está demasiado "
"deteriorada :(\n"
"Pódese probar baleirando as particións erróneas (¡Perderanse TODOLOS "
"datos!).\n"
"A outra solución é impedir que o DrakX modifique a táboa de particións.\n"
"(o erro é %s)\n"
"\n"
"¿Está de acordo ca perda de tódalas particións?\n"

#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Os puntos de montaxe deben comezar por /"

#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Os puntos de montaxe só poden conter caracteres alfanuméricos"

#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Xa existe unha partición co punto de montaxe %s\n"

#: fsedit.pm:385
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Seleccionou unha partición RAID por software coma raíz (/).\n"
"Non hai ningún cargador de arrinque capaz de manexar isto\n"
"sen unha partición /boot.\n"
"Asegúrese de engadir unha partición /boot"

#: fsedit.pm:390
#, fuzzy, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr "Non pode usar un Volume Lóxico LVM para o punto de montaxe %s"

#: fsedit.pm:392
#, fuzzy, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
"Seleccionou un Volume Lóxico LVM coma raíz (/).\n"
"O cargador de arrinque non é capaz de manexar isto sen unha\n"
"partición /boot.\n"
"Asegúrese de engadir unha partición /boot"

#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz"

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Necesita un sistema de ficheiros real (ext2/ext3, reiserfs, xfs, ou jfs) "
"para este punto de montaxe\n"

#: fsedit.pm:404
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
"Non pode usar un sistema de ficheiros cifrado para o punto de montaxe %s"

#: fsedit.pm:465
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Non hai espacio libre dabondo para asignar novas particións"

#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr "Nada que facer"

#: harddrake/data.pm:62 install_any.pm:1712
#, c-format
msgid "Floppy"
msgstr "Disquete"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:88 install_any.pm:1713
#, c-format
msgid "Hard Disk"
msgstr "Disco"

#: harddrake/data.pm:97 install_any.pm:1714
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "Gravadoras de CD/DVD"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:127 standalone/drakbackup:2055
#, c-format
msgid "Tape"
msgstr "Cinta"

#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Tarxeta de Video"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr "Tarxeta DVB"

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "Tarxeta de TV"

#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Outros dispositivos MultiMedia"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Tarxeta de Son"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Webcam"

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Procesadores"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "Adaptadores RDSI"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr "Dispositivos USB de son"

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr "Tarxetas de radio"

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr "Tarxetas de rede ATM"

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr "Tarxetas de rede WAN"

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr "Dispositivos Bluetooth"

#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Tarxeta Ethernet"

#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr "Módem"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "Adaptadores ADSL"

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Memoria"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "Controladoras AGP"

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:993
#, c-format
msgid "Printer"
msgstr "Impresora"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Joystick"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "Controladores SATA"

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "Controladores RAID"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Controladoras (E)IDE/ATA"

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Controladoras Firewire"

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "Controladoras PCMCIA"

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "Controladoras SCSI"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "Controladoras USB"

#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "Portos USB"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "Controladores SMBus"

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Teclado"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
#, c-format
msgid "Mouse"
msgstr "Rato"

#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "SAI"

#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "Escáner"

#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr "Descoñecidos/Outros"

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Por Favor, Agarde... Aplicando a configuración"

#: harddrake/sound.pm:228
#, c-format
msgid "No alternative driver"
msgstr "Non hai driver alternativo"

#: harddrake/sound.pm:229
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Non hai ningún driver OSS/ALSA alternativo para a súa tarxeta de son (%s) "
"que actualmente usa \"%s\""

#: harddrake/sound.pm:235
#, c-format
msgid "Sound configuration"
msgstr "Configuración do son"

#: harddrake/sound.pm:237
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Aquí pode seleccionar un driver alternativo (tanto OSS coma ALSA) para a súa "
"tarxeta de son (%s)."

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:242
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"A tarxeta está usando o driver %s\"%s\" (o driver predeterminado da tarxeta "
"é \"%s\")"

#: harddrake/sound.pm:244
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Open Sound System) foi a primeira API de son. É unha API de son "
"independente do SO (está dispoñible na maioría dos sistemas UNIX(tm)) pero é "
"unha API moi básica e limitada.\n"
"Ainda máis, tódolos drivers OSS reinventan a roda.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) é unha arquitectura modularizada\n"
"que soporta un gran rango de tarxetas ISA, USB e PCI.\n"
"\n"
"Tamén proporciona unha API superior ca OSS.\n"
"\n"
"Para usar alsa pódense usar:\n"
"- a vella api de compatibilidade con OSS\n"
"- a nova api ALSA que proporciona moitas funcionalidades melloradas pero "
"require o uso da librería ALSA.\n"

#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Driver:"

#: harddrake/sound.pm:266
#, c-format
msgid "Trouble shooting"
msgstr "Solución de problemas"

#: harddrake/sound.pm:274
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:282
#, c-format
msgid "No open source driver"
msgstr "Non hai un driver de código aberto"

#: harddrake/sound.pm:283
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Non hai un driver libre para a súa tarxeta de son (%s), pero hai un driver "
"propietario en \"%s\"."

#: harddrake/sound.pm:286
#, c-format
msgid "No known driver"
msgstr "Driver descoñecido"

#: harddrake/sound.pm:287
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Non hai ningún driver coñecido para a súa tarxeta de son (%s)"

#: harddrake/sound.pm:291 network/netconnect.pm:98 network/netconnect.pm:833
#, c-format
msgid "Unknown driver"
msgstr "Driver descoñecido"

#: harddrake/sound.pm:292
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Erro: O driver \"%s\" para a súa tarxeta de son non está na lista"

#: harddrake/sound.pm:306
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:309
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:335
#, c-format
msgid "Let me pick any driver"
msgstr "Déixeme escoller un driver calquera"

#: harddrake/sound.pm:338
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Escolleando un driver ó chou"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:341
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Se sabe cal driver é o axeitado para a súa tarxeta\n"
"pode escollelo na lista de enriba.\n"
"\n"
"O driver actual para a súa tarxeta de son \"%s\" é \"%s\" "

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "Detección automática"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Descoñecido|Xenérico"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Descoñecido|CPH05X (bt878) [varios vendedores]"

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Descoñecido|CPH06X (bt878) [varios vendedores]"

#: harddrake/v4l.pm:404
#, fuzzy, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Para a maioría das tarxetas de TV modernas, o módulo bttv do kernel Linux "
"detecta automáticamente os parámetros correctos.\n"
"Se a súa tarxeta non se detecta, vostede pode forzar \n"
" the right tuner and card types here. Just select your tv card parameters if "
"needed."

#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "Modelo de tarxeta:"

#: harddrake/v4l.pm:408
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "Mudar o tipo de partición"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr "Número de bufers de captura:"

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:411
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "Formatando"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "Soporte de radio:"

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "activar o soporte de radio"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Antes de continuar, debe ler con coidado os termos da licenza. Esta\n"
"licenza cobre toda a distribución Mandriva Linux. Se está de acordo\n"
"con tódolos termos que contén, marque o cadro \"%s\". Se non o está,\n"
"prema no botón \"%s\" e reiniciarase o seu ordenador."

#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Aceptar"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux é un sistema multiusuario o que significa que cada usuario pode\n"
"ter as súas propias preferencias, os seus propios ficheiros, etc. Pero a\n"
"diferencia de \"root\", que é o administrador do sistema, os usuarios que\n"
"engada agora non estarán autorizados para cambiar nada agás os seus\n"
"propios ficheiros e as súas propias configuracións, protexendo o sistema de\n"
"cambios involuntarios ou malintencionados que poderían afectar a todo o\n"
"sistema. Terá que crear como mínimo un usuario normal para vostede -- esta\n"
"é a conta que usará para o uso cotián e rutineiro. Ainda que é moi sinxelo\n"
"entrar no sistema coma \"root\" para facer calquera cousa, pode ser moi\n"
"perigoso! Un pequeno erro pode significar que o seu sistema non volva\n"
"funcionar nunca máis. Se un usuario normal comete un erro moi grave, o\n"
"peor que pode suceder é que perda algunha información, pero non\n"
"afectará a todo o sistema.\n"
"\n"
"O primeiro campo pregúntalle un nome real. Dende logo, isto non é\n"
"obrigatorio -- actualmente pode introducir o que queira. DrakX collerá a\n"
"primeira palabra que introduza neste campo e copiaraa ó campo\n"
"\"%s\", que é o nome que o usuario introducirá para entrar no\n"
"sistema. Se o desexa, pode non facer caso do predeterminado e cambiar\n"
"o nome de usuario. O seguinte paso é introducir un contrasinal. Dende\n"
"o punto de vista da seguridade, o contrasinal dun usuario sen\n"
"privilexios (normal) non é tan crucial coma o contrasinal de \"root\", pero\n"
"esa non é razón para descoidarse deixándoa en branco ou poñendo\n"
"unha moi fácil: despois de todo, os nosos ficheiros poden estar en perigo.\n"
"\n"
"Unha vez que clique en \"%s\", poderá engadir máis usuarios.\n"
"Engada un usuario para cada un dos seus amigos, o seu pai, a súa\n"
"irmá, etc. Prema \"%s\" cando remate de engadir os usuarios.\n"
"\n"
"Se preme o botón \"%s\" poderá cambiar a \"shell\" predeteminada\n"
"para ese usuario (bash por defecto).\n"
"\n"
"Cando remate de engadir os usuarios, diráselle que elixa o usuario que\n"
"entrará automáticamente no sistema cando se arrinca o ordenador. Se\n"
"lle interesa esta funcionalidade (e non lle preocupa moito a seguridade\n"
"local), elixa o usuario e o xestor de ventás que desexe, e despois clique\n"
"en \"%s\". Se non está interesado nesta funcionalidade,\n"
"desmarque o cadro \"%s\"."

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Nome de usuario"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:383 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Seguinte"

#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Desexa usar esta funcionalidade?"

#: help.pm:54
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"As particións listadas aquí son as particións Linux existentes detectadas "
"no\n"
"seu disco duro. Pode manter as eleccións feitas polo asistente, xa que son\n"
"boas para as instalacións máis comúns. Se fai algún troco, debe definir "
"como\n"
"mínimo unha partición raíz (\"/\"). Non escolla unha partición moi pequena\n"
"ou non poderá instalar moito software. Se desexa almacenar os seus datos\n"
"nunha partición á parte, terá que crear unha partición \"/home\" (só será\n"
"posible se ten máis dunha partición Linux dispoñible).\n"
"\n"
"Cada partición lístase así: \"Nome\", \"Capacidade\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."

#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"A instalación de Mandriva Linux distribúese en varios CDs. Se un\n"
"paquete dos seleccionados está noutro CD, o DrakX expulsará o CD\n"
"actual e diralle que insira o CD requirido. Se non ten o CD requirido a "
"man,\n"
"prema en \"%s\", e os paquetes correspondentes non se instalarán."

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"Agora terá que especificar que programas desexa instalar no seu sistema.\n"
"Hai milleiros de paquetes dispoñibles para Mandriva Linux, e para facer que\n"
"sexa máis sinxelo manexalos, puxéronse en grupos de aplicacións "
"semellantes.\n"
"\n"
"Mandriva Linux ordena os grupos de paquetes en catro categorías. Vostede\n"
"pode mesturar aplicacións de varias categorías, de xeito que unha "
"instalación\n"
"``Estación de Traballo'' poida ter instaladas aplicacións da categoría "
"``Servidor''.\n"
"\n"
" * \"%s\": se ten pensado usar a súa máquina coma unha estación de "
"traballo,\n"
"seleccione un ou máis dos grupos da categoría estación de traballo.\n"
"\n"
" * \"%s\": se vai usar a súa máquina para programar, seleccione os grupos\n"
"que desexe desta categoría. O grupo especial \"LSB\" configurará o seu\n"
"sistema para que cumpra as especificacións Linux Standard Base tanto coma\n"
"sexa posible.\n"
"\n"
"   Se selecciona o grupo \"LSB\" instalarase tamén un kernel da serie\n"
"\"2.4\", en vez do predeterminado da \"2.6\". Isto é para asegurar que o\n"
"sistema cumpre ó 100%% o LSB. Sen embargo, se non selecciona o grupo\n"
"\"LSB\" ainda terá un sistema que case cumpre ó 100%% con LSB.\n"
"\n"
" * \"%s\": se a súa máquina vai ser un servidor, seleccione cales dos\n"
"servicios máis comúns desexa instalar na súa máquina.\n"
"\n"
" * \"%s\": aquí é onde vai elixir o seu ambiente gráfico preferido. Debe\n"
"seleccionar como mínimo un se desexa ter dispoñible unha interface gráfica.\n"
"\n"
"Se pon o cursor do rato enriba do nome dun grupo amosarase un pequeno\n"
"texto explicativo acerca dese grupo.\n"
"\n"
"Pode marcar o cadro \"%s\", o cal é útil se coñece ben os paquetes que\n"
"se ofrecen ou se desexa ter un control total sobre o que se vai instalar.\n"
"\n"
"Se comeza a instalación en modo \"%s\", poderá deseleccionar tódolos\n"
"grupos e impedir a instalación de calquera novo paquete. Isto é útil para\n"
"reparar ou actualizar un sistema xa existente.\n"
"\n"
"Se deselecciona tódolos grupos ó levar a cabo unha instalación normal\n"
"(a diferencia dunha actualización), aparecerá un diálogo suxerindo\n"
"opcións diferentes para unha instalación mínima:\n"
"\n"
" * \"%s\": instala o número mínimo de paquetes posible para ter un\n"
"ambiente gráfico que funcione.\n"
"\n"
" * \"%s\": instala o sistema base máis utilidades básicas e a súa\n"
"documentación. Esta instalación é axeitada para configurar un servidor.\n"
"\n"
" * \"%s\": instalará o número mínimo absoluto de paquetes necesario\n"
"para obter un sistema Linux que funcione. Con esta instalación só terá\n"
"unha interface de liña de comandos. O tamaño total desta instalación\n"
"é de máis ou menos 65 megabytes."

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Estación de traballo"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Desenvolvemento"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Entorno Gráfico"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr "Selección individual de paquetes"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Actualizar"

#: help.pm:146 install_steps_interactive.pm:604
#, c-format
msgid "With X"
msgstr "Con X"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Con documentación básica"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Instalación minima de verdade"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"Se elixe instalar os paquetes individualmente, o instalador amosaralle unha\n"
"árbore que contén tódolos paquetes clasificados por grupos e subgrupos.\n"
"Mentres navega pola árbore, pode seleccionar grupos enteiros, subgrupos,\n"
"ou paquetes individuais.\n"
"\n"
"Cando seleccione un paquete da árbore, aparecerá unha descrición á\n"
"dereita para que saiba cal é o propósito dese paquete.\n"
"\n"
"!!Se se selecciona un paquete de servidor, xa sexa porque vostede elixiu\n"
"dito paquete ou porque é parte dun grupo de paquetes, pediráselle que\n"
"confirme que desexa instalar estes servidores. De maneira predeterminada\n"
"Mandriva Linux iniciará automáticamente ó arrincar o sistema tódolos\n"
"servicios instalados. Incluso se son seguros e non tiñan ningún problema\n"
"coñecido cando se fixo a distribución, é posible que se descubriran buratos\n"
"de seguridade despois de que se rematara esta versión de Mandriva Linux.\n"
"Se non sabe que fai un servicio determinado ou por que se vai instalar,\n"
"clique en \"%s\". Se clica en \"%s\" instalaranse os servicios listados e\n"
"iniciaranse automáticamente ó arrincar o sistema!!\n"
"\n"
"A opción \"%s\" úsase para deshabilitar o diálogo de advertencia que\n"
"aparece cando o instalador selecciona automáticamente un paquete para\n"
"resolver un problema de dependencias. Algúns paquetes dependen doutros\n"
"e a instalación dun paquete determinado pode requirir a instalación doutro\n"
"paquete. O instalador pode determinar que paquetes son necesarios para\n"
"satisfacer unha dependencia e completar con éxito a instalación.\n"
"\n"
"A pequena icona cun disquete debuxado que está no fondo da lista\n"
"permítelle cargar unha lista de paquetes creada durante unha instalación\n"
"anterior. Isto é útil se ten varias máquinas que desexa configurar igual. "
"Se\n"
"clica nesta icona pediráselle que introduza o disquete que se creou ó final\n"
"da outra instalación. Mire o segundo consello do último paso para ver como\n"
"se crea dito disquete."

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:946
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "Non"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:946 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Si"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "Dependencias automáticas"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": premendo no botón \"%s\" abrirase o asistente de configuración de\n"
"impresoras. Consulte o capitulo correspondente da ``Guía de Inicio'' para "
"obter\n"
"máis información acerca de como configurar unha nova impresora. A interface\n"
"presente no manual é semellante á que se usa durante a instalación."

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Configurar"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Este diálogo úsase para seleccionar que servicios quere que arrinquen ó\n"
"iniciar o sistema.\n"
"\n"
"DrakX listará tódolos servicios dispoñibles na instalación actual. Examine\n"
"cada un deles coidadosamente e desmarque aqueles que non son\n"
"necesarios ó iniciar o sistema.\n"
"\n"
"Cando seleccione un servicio amosarase un pequeno texto explicatorio\n"
"sobre o servicio. Sen embargo, se non está seguro sobre se un servicio\n"
"é útil ou non, é mellor deixalo como estea.\n"
"\n"
"¡¡ Sexa especialmente coidadoso neste paso se pretende utiliza-la súa\n"
"máquina coma un servidor: probablemente non quererá arrincar servicios que\n"
"non precisa. Lembre que algúns servicios poden ser perigosos se están\n"
"activados nun servidor. En xeral, seleccione só aqueles servicios que\n"
"necesite de verdade !!"

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux manexa a hora en GMT (Greenwich Mean Time) e tradúcea á\n"
"hora local de acordo ca zona horaria que seleccionou. Se o reloxo da súa\n"
"placa base usa a hora local, debería desactivar isto deseleccionando\n"
"\"%s\", o cal lle permitirá a GNU/Linux saber que o reloxo do sistema e o\n"
"reloxo do hardware están na mesma zona horaria. Isto é útil cando a máquina\n"
"tamén ten outro sistema operativo.\n"
"\n"
"A opción \"%s\" regulará automáticamente o reloxo do sistema conectándose\n"
"a un servidor remoto de tempo da Internet. Para que esta funcionalidade\n"
"funcione, debe ter unha conexión a Internet que funcione. Recomendámoslle\n"
"que elixa un servidor de tempo que estea situado preto de vostede. Esta\n"
"opción en realidade instala un servidor de tempo o cal tamén pode ser usado\n"
"por outras máquinas da súa rede local."

#: help.pm:217 install_steps_interactive.pm:888
#, c-format
msgid "Hardware clock set to GMT"
msgstr "O reloxo interno do ordenador usa a hora GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Sincronización automática da hora"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Tarxeta Gráfica\n"
"\n"
"   Normalmente o instalador detecta automáticamente detecta e configura\n"
"a tarxeta gráfica instalada no ordenador. Se non é a correcta, pode elixir\n"
"nesta lista a tarxeta gráfica que está conectada ó ordenador.\n"
"\n"
"   Se hai varios servidores dispoñibles para a súa tarxeta, con ou sen\n"
"aceleración 3D, terá que elixir o servidor que se axusta mellor ás súas "
"necesidades."

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"As X (por X Window System) son o corazón da interface gráfica de\n"
"GNU/Linux do que dependen tódolos ambientes gráficos (KDE, GNOME,\n"
"AfterStep, WindowMaker, etc.) proporcionados por Mandriva Linux.\n"
"\n"
"Vostede verá unha lista dos diferentes parámetros que se poden\n"
"cambiar para obter unha visualización gráfica óptima.\n"
"\n"
"Tarxeta Gráfica\n"
"\n"
"   O instalador normalmente detectará e configurará automáticamente\n"
"a tarxeta gráfica instalada na súa máquina. Se esta non é a correcta,\n"
"pode escoller nesta lista a tarxeta que ten instalada en realidade.\n"
"\n"
"   Na situación na que haxa dispoñibles diferentes servidores para a súa\n"
"tarxeta, con ou sen aceleración 3D, pediráselle que elixa o servidor que\n"
"mellor se adapte ás súas necesidades.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normalmente o instalador detectará e configurará automáticamente o\n"
"monitor conectado á súa máquina. Se non é o correcto, pode elixir nesta\n"
"lista o monitor que está conectado ó seu ordenador.\n"
"\n"
"\n"
"\n"
"Resolución\n"
"\n"
"   Aquí vostede pode escoller as resolucións e as profundidades de cor\n"
"dispoñibles para o seu hardware gráfico. Elixa a que mellor se adapte ás\n"
"súas necesidades (poderá facer cambios despois da instalación).\n"
"Amosarase unha mostra da configuración elixida na imaxe do monitor.\n"
"\n"
"\n"
"\n"
"Comprobación\n"
"\n"
"   Dependendo do hardware que teña, esta entrada podería non aparecer.\n"
"\n"
"   O sistema intentará abrir unha pantalla gráfica ca resolución desexada.\n"
"Se vostede ve a mensaxe de proba durante a comprobación e responde\n"
"\"%s\", entón DrakX pasará ó seguinte paso. Se non a ve, entón significa\n"
"que parte da configuración detectada automáticamente é incorrecta e a\n"
"comprobación rematará automáticamente despois de 12 segundos e\n"
"volverá ó menú. Cambie as opcións ata que consiga unha aparencia\n"
"gráfica correcta.\n"
"\n"
"\n"
"\n"
"Opcións\n"
"\n"
"   Este paso permítelle elixir se desexa que a súa máquina inicie\n"
"automáticamente a interface gráfica ó arrincar. Evidentemente, vostede\n"
"podería desexar marcar \"%s\" se a súa máquina vai ser un servidor,\n"
"ou se non conseguiu configurar as X."

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Monitor\n"
"\n"
"   O instalador normalmente detecta automáticamente detecta e configura o\n"
"monitor conectado ó seu ordenador. Se non é o correcto, pode elixir nesta\n"
"lista o monitor que ten conectado ó seu ordenador."

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Resolución\n"
"\n"
"   Aquí pode escoller as resolucións e as profundidades de cor dispoñibles "
"para\n"
"o seu hardware gráfico. Escolla o que mellor se axuste ás súas necesidades\n"
"(poderá facer trocos despois da instalación). Amosarase un exemplo da\n"
"configuración elixida na pantalla."

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"Se se da a situación na que hai diferentes servidores dispoñibles para a\n"
"súa tarxeta, con ou sen aceleración 3D, poderá elixir o servidor que mellor\n"
"cubra as súas necesidades."

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"Opcións\n"
"\n"
"   Estes pasos permítenlle escoller se a súa máquina debe iniciar\n"
"automáticamente unha interface gráfica ó arrincar ou non. Obviamente,\n"
"vostede pode querer desmarcar \"%s\" se a súa máquina vai actuar\n"
"coma un servidor, ou se non tivo éxito configurando o contorno gráfico."

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Agora ten que decidir onde quere instalar o sistema operativo\n"
"Mandriva Linux no disco duro. Se o seu disco duro está baleiro, ou se\n"
"outro sistema operativo está usando todo o espacio dispoñible, terá que\n"
"particionalo. Básicamente, particionar un disco duro consiste en dividilo\n"
"lóxicamente para crear o espacio necesario para instalar o seu novo\n"
"sistema Mandriva Linux.\n"
"\n"
"Debido a que o proceso de particionamento é normalmente irreversible\n"
"e pode provocar perdas de datos, o particionamento pode intimidar e\n"
"resultar estresante para un usuario sen experiencia. Afortunadamente,\n"
"DrakX inclúe un asistente que simplifica este proceso. Antes de\n"
"continuar con este paso, lea toda esta sección e sobre todo, tómese\n"
"o seu tempo.\n"
"\n"
"Dependendo da configuración do seu disco duro, hai varias opcións\n"
"dispoñibles:\n"
"\n"
" * \"%s\". Esta opción levará a cabo un particionamento automático\n"
"da(s) súa(s) unidade(s) baleira(s). Se usa esta opción non haberá máis\n"
"avisos.\n"
"\n"
" * \"%s\". O asistente detectou que existen unha ou máis particións\n"
"Linux no seu disco duro. Se desexa usalas, elixa esta opción. Entón\n"
"diráselle que escolla os puntos de montaxe asociados con cada unha\n"
"das particións. Os puntos de montaxe herdados selecciónanse por\n"
"defecto, e para a maioría é boa idea mantelos.\n"
"  \n"
" * \"%s\". Se Microsoft Windows está instalado no seu disco duro e\n"
"ocupa todo o espacio dispoñible nel, terá que crear espacio libre para\n"
"GNU/Linux. Para facelo, pode eliminar os datos e a partición Microsoft\n"
"Windows (mire a solución ``Borrar todo o disco'') ou redimensionar a\n"
"partición Microsoft Windows FAT ou NTFS. O redimensionamento\n"
"pode levarse a cabo sen a perda de ningún dato, con tal que\n"
"desfragmente previamente a partición Windows. É moi recomendable\n"
"que faga unha copia de seguridade dos seus datos. Recoméndase\n"
"usar esta opción se desexa usar Mandriva Linux e Microsoft\n"
"Windows no mesmo ordenador.\n"
"\n"
"   Antes de escoller esta opción, debe comprender que despois deste\n"
"procedemento, o tamaño da súa partición Microsoft Windows será máis\n"
"pequeno do que é agora. Terá menos espacio libre en Microsoft Windows\n"
"para almacenar os seus datos ou para instalar novo software.\n"
"\n"
" * \"%s\". Se desexa eliminar tódolos datos e as particións presentes no\n"
"seu disco duro e remprazalas polo seu novo sistema Mandriva Linux, elixa\n"
"esta opción. Teña coidado, porque non poderá desfacer esta operación\n"
"despois de que confirme.\n"
"\n"
"   !! Se elixe esta opción, eliminaranse tódolos datos do seu disco "
"duro. !!\n"
"\n"
" * \"%s\". Esta opción aparece cando Microsoft Windows colleu todo o\n"
"disco duro. Se elixe esta opción simplemente eliminarase toda a unidade\n"
"e comezarase de novo, particionando todo dende cero.\n"
"\n"
"   !! Se elixe esta opción, perderanse tódolos datos do seu disco duro. !!\n"
"\n"
" * \"%s\". Elixa esta opción se desexa particionar a man o seu disco duro.\n"
"Teña tino -- é unha elección potente pero perigosa e pode perder moi\n"
"fácilmente tódolos seus datos. É por iso polo que só se recomenda esta\n"
"opción se fixo algo coma isto antes e ten algunha experiencia. Para máis\n"
"instruccións sobre como usar a utilidade DiskDrake, refírase á sección\n"
"``Administrando as súas Particións'' da ``Guía de Inicio''."

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Usar espacio libre"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Usar partición existente"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Usa-lo espacio libre da partición de Windows"

#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr "Borra-lo disco enteiro"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Elimina-lo Windows"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Particionamento de disco personalizado"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"Xa está. A instalación rematou e o seu sistema GNU/Linux está preparado\n"
"para que poida usalo. Clique en \"%s\" para reiniciar o sistema. Non\n"
"esqueza extraer o soporte de instalación (CD-ROM ou disquete). A primeira\n"
"cousa que debería ver despois de que o seu ordenador remate de facer a\n"
"comprobación do hardware é o menú do cargador de arrinque, que lle da\n"
"opción de elixir que sistema operativo se vai iniciar.\n"
"\n"
"O botón \"%s\" amosa dous botóns máis:\n"
"\n"
" * \"%s\": permítelle crear un disquete de instalación que levará a cabo\n"
"automáticamente unha instalación completa sen a axuda dun operador,\n"
"semellante á instalación que acaba de facer.\n"
"\n"
"   Teña en conta que despois de clicar neste botón hai dispoñibles dúas\n"
"opcións diferentes:\n"
"\n"
"    * \"%s\". Esta é unha instalación parcialmente automatizada. O paso\n"
"do particionamento é o único interactivo.\n"
"\n"
"    * \"%s\". Instalación totalmente automática: O disco duro reescríbese\n"
"totalmente, perdendo tódolos datos.\n"
"\n"
"   Esta funcionalidade é moi práctica para instalar en varias máquinas\n"
"semellantes. Mire na sección Auto install no noso sitio web para obter\n"
"máis información.\n"
"\n"
" * \"%s\"(*): garda unha lista dos paquetes seleccionados nesta "
"instalación.\n"
"Para usar esta selección noutra instalación, insira o disquete e inicie a\n"
"instalación. Na liña de comandos, prema a tecla [F1], escriba >>linux\n"
"defcfg=\"floppy\"<< e prema a tecla [Intro].\n"
"\n"
"(*) Necesita un disquete formatado con FAT. Para crear un en GNU/Linux,\n"
"escriba \"mformat a:\", ou \"fdformat /dev/fd0\" seguido de \"mkfs.vfat\n"
"/dev/fd0\"."

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Xerar un disquete de auto-instalación"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Replay"
msgstr "Reproducir"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Automated"
msgstr "Automatizada"

#: help.pm:409 install_steps_interactive.pm:1346
#, c-format
msgid "Save packages selection"
msgstr "Garda-la selección de paquetes"

#: help.pm:412
#, fuzzy, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Se elixe reutilizar algunhas das particións GNU/Linux xa existentes, "
"podería\n"
"desexar volver formatar algunhas delas e eliminar tódolos datos que\n"
"conteñen. Para facer isto seleccione estas particións tamén.\n"
"\n"
"Teña en conta que non cómpre volver formatar tódalas particións xa\n"
"existentes. Debe volver formatar as particións que conteñen o sistema\n"
"operativo (coma \"/\", \"/usr\" ou \"/var\") pero non ten que volver\n"
"formatar particións que conteñen datos que desexa gardar (normalmente\n"
"\"/home\").\n"
"\n"
"Teña tino ó seleccionar as particións. Despois de formatalas, eliminaranse\n"
"tódolos datos das particións seleccionadas e non poderá recuperalos.\n"
"\n"
"Clique en \"%s\" cando estea preparado para formatar as particións.\n"
"\n"
"Clique en \"%s\" se desexa elixir outra partición para a instalación do seu\n"
"novo sistema operativo Mandriva Linux.\n"
"\n"
"Clique en \"%s\" se desexa seleccionar as particións que \n"
"which will be checked for\n"
"bad blocks on the disk."

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "Anterior"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"Cando instalou Mandriva Linux é probable que algúns paquetes se\n"
"actualizaran dende a publicación inicial. Pode ser que se resolveran erros,\n"
"e se solucionaran problemas de seguridade. Para beneficiarse destas\n"
"actualizacións agora, pode descargalas dende a Internet. Marque \"%s\"\n"
"se ten unha conexión a Internet, ou \"%s\" se prefire instalar os paquetes\n"
"actualizados máis tarde.\n"
"\n"
"Se preme en \"%s\" amosarase unha lista das localizacións web dende\n"
"as que se pode actualizar. Debe escoller unha que estea preto de vostede.\n"
"Aparecerá unha árbore de selección de paquetes: revise a selección, e\n"
"prema \"%s\" para descargar e instala-lo(s) paquete(s) seleccionado(s),\n"
"ou \"%s\" para abortar."

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "Instalar"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"Neste punto, DrakX permitiralle elixir o nivel de seguridade que desexa\n"
"que teña a súa máquina. Como regra xeral, o nivel de seguridade debe\n"
"ser maior se a máquina vai conter datos moi importantes, ou se vai estar\n"
"exposta directamente á Internet. Normalmente un nivel de seguridade\n"
"maior obtense a expensas da facilidade de uso.\n"
"\n"
"Se non sabe cal escoller, deixe a opción predeterminada. Poderá\n"
"cambiala máis tarde ca ferramenta draksec, a cal é parte do Centro de\n"
"Control de Mandriva Linux.\n"
"\n"
"Complete o campo \"%s\" co enderezo de correo-e (e-mail) da persoa\n"
"responsable da seguridade. As mensaxes de seguridade enviaranse a\n"
"ese enderezo."

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Administrador de Seguridade"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Neste punto cómpre que escolla que partición(s) se van usar para a\n"
"instalación do seu sistema Mandriva Linux. Se as particións xa se\n"
"crearon, xa sexa nunha instalación anterior de GNU/Linux ou con\n"
"outra ferramenta de particionamento, vostede pode usar as particións\n"
"existentes. Se non é así, débense crear as particións no disco duro.\n"
"\n"
"Para crear particións primeiro debe seleccionar un disco duro. Pode\n"
"seleccionar o disco a particionar clicando en ``hda'' para a primeira\n"
"unidade IDE, ``hdb'' para a segunda, ``sda'' para a primeira unidade\n"
"SCSI, etc.\n"
"\n"
"Para particionar o disco duro seleccionado pode usar estas opcións:\n"
"\n"
" * \"%s\": esta opción elimina tódalas particións do disco duro\n"
"seleccionado\n"
"\n"
" * \"%s\": esta opción permítelle crear automáticamente particións\n"
"ext3 e swap no espacio baleiro do disco duro\n"
"\n"
"\"%s\": dálle acceso a funcionalidades adicionais:\n"
"\n"
" * \"%s\": garda a táboa de particións nun disquete. É útil para\n"
"posteriores recuperacións da táboa de particións, en caso de ser\n"
"necesario. É altamente recomendable que leve a cabo este paso.\n"
"\n"
" * \"%s\": permítelle restaurar unha táboa de particións gardada nun\n"
"disquete.\n"
"\n"
" * \"%s\": se a súa táboa de particións está danada, vostede pode intentar\n"
"recuperala usando esta opción. Por favor teña tino e lembre que non\n"
"sempre funciona.\n"
"\n"
" * \"%s\": desbota tódolos cambios e recarga a táboa de particións orixinal\n"
"do disco duro.\n"
"\n"
" * \"%s\": se desmarca esta opción forzará ós usuarios a montar e\n"
"desmontar a man os soportes extraíbles coma os disquetes e os CD-ROMs.\n"
"\n"
" * \"%s\": use esta opción se desexa usar un asistente para particionar\n"
"o seu disco duro. Recoméndase isto se non sabe moito sobre o\n"
"particionamento.\n"
"\n"
" * \"%s\": use esta opción para cancelar tódolos seus cambios.\n"
"\n"
" * \"%s\": permite accións adicionais sobre as particións (tipo, opcións,\n"
"formato) e proporciona máis información sobre o disco duro.\n"
"\n"
" * \"%s\": cando remate o particionamento do seu disco duro, isto\n"
"gardará os cambios no disco.\n"
"\n"
"Cando estea definindo o tamaño das particións pode establecelo\n"
"con exactitude usando as teclas das Frechas do teclado.\n"
"\n"
"Nota: pode obter calquera opción usando o teclado. Navegue polas\n"
"particións usando [Tab] e as frechas [Arriba/Abaixo].\n"
"\n"
"Cando se selecciona unha partición, vostede poderá usar:\n"
"\n"
" * Ctrl-c para crear unha nova partición (cando se selecciona unha\n"
"partición baleira)\n"
"\n"
" * Ctrl-d para eliminar unha partición\n"
"\n"
" * Ctrl-m para establecer o punto de montaxe\n"
"\n"
"Para obter información sobre os diferentes tipos de sistemas de ficheiros\n"
"dispoñibles, lea o capítulo sobre ext2FS do ``Reference Manual''.\n"
"\n"
"Se está instalando nunha máquina PPC, quererá crear unha pequena\n"
"partición HFS para ``bootstrap'' de como mínimo 1MB a cal vai ser usada\n"
"polo cargador de arrinque yaboot. Se opta por facer a partición un pouco\n"
"máis grande, digamos de 50MB, podería darse conta de que é un sitio útil\n"
"para almacenar un kernel de reserva e imaxes ramdisk para situacións de\n"
"arrinques de emerxencia."

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Montar automáticamente os soportes extraíbles"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Cambiar entre modo normal/experto"

#: help.pm:533
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Detectouse máis dunha partición Microsoft no seu disco duro.\n"
"Elixa a que quere redimensionar para poder instalar o seu novo\n"
"sistema operativo Mandriva Linux.\n"
"\n"
"Cada partición está listada do seguinte xeito: \"Nome en Linux\", \"Nome en "
"Windows\"\n"
"\"Capacidade\".\n"
"\n"
"O \"nome en Linux\" ten esta estructura: \"tipo de disco duro\", \n"
"\"número de disco duro\", \"número de partición\" (por exemplo, \"hda1\").\n"
"\n"
"O \"tipo de disco duro\" é \"hd\" se o seu disco duro é un disco duro IDE\n"
"e \"sd\" se é un disco duro SCSI.\n"
"\n"
"O \"número de disco duro\" é sempre unha letra despois de \"hd\" ou\n"
"\"sd\". En discos duros IDE:\n"
"\n"
" * \"a\" significa \"disco duro mestre no controlador IDE primario\";\n"
"\n"
" * \"b\" significa \"disco duro escravo no controlador IDE primario\";\n"
"\n"
" * \"c\" significa \"disco duro mestre no controlador IDE secundario\";\n"
"\n"
" * \"d\" significa \"disco duro escravo no controlador IDE secundario\".\n"
"\n"
"En discos duros SCSI, un \"a\" significa \"lowest SCSI ID\", un \"b\" "
"significa\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"O \"nome en Windows\" é a letra que ten o seu disco duro en Windows\n"
"(o primeiro disco ou partición chámase \"C:\")."

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": verifique a selección actual do país. Se non está nese país,\n"
"prema no botón \"%s\" e escolla o seu. Se o seu país non está na lista\n"
"que se amosa, prema no botón \"%s\" para obter a lista completa de paises."

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
"Este paso actívase só se se atopou algunha partición GNU/Linux na súa\n"
"máquina.\n"
"\n"
"DrakX necesita saber agora se desexa facer unha nova instalación ou\n"
"unha actualización dun sistema Mandriva Linux xa existente:\n"
"\n"
" * \"%s\". A maioría das veces, isto destrúe completamente o sistema\n"
"antigo. Sen embargo, dependendo de como sexa o seu esquema de\n"
"particionamento, poderá impedir que se sobrescriban algúns dos datos\n"
"existentes (especialmente os directorios \"home\"). Se desexa cambiar o\n"
"xeito no que están particionados os seus discos duros, ou desexa cambiar\n"
"o sistema de ficheiros, debe usar esta opción.\n"
"\n"
" * \"%s\". Este tipo de instalación permítelle actualiza-los paquetes que\n"
"hai actualmente instalados no seu sistema Mandriva Linux. Non se\n"
"modificarán nin o esquema de particionamento actual nin os datos dos\n"
"usuarios. A maior parte dos outros pasos de configuración estarán\n"
"dispoñibles e serán semellantes ós dunha instalación estándar.\n"
"\n"
"O uso da opción ``Actualizar'' debería funcionar ben en sistemas con\n"
"Mandriva Linux versión \"8.1\" ou posteriores. Non se recomenda levar\n"
"a cabo actualizacións en versións anteriores á versión \"8.1\" de\n"
"Mandriva Linux."

#: help.pm:591
#, fuzzy, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Dependendo da lingua que escollera, DrakX seleccionará automáticamente\n"
"un tipo ou unha configuración de teclado determinada. Verifique que a\n"
"selección é a axeitada ou elixa outra disposición de teclado.\n"
"\n"
"Tamén pode ser que non teña un teclado que corresponda exactamente\n"
"ca súa lingua: por exemplo, se vostede fala Inglés e é nativo de Suíza,\n"
"vostede terá un teclado suízo. Ou se vostede fala Inglés e está en Quebec,\n"
"podería atoparse na mesma situación na que a súa lingua e o teclado non\n"
"concordan. En calquera destes casos, este paso da instalación permitiralle\n"
"seleccionar o teclado axeitado dunha lista.\n"
"\n"
"Clique no botón \"%s\" para ver unha lista dos teclados soportados.\n"
"\n"
"Se elixiu unha disposición de teclado\n"
"based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."

#: help.pm:609
#, fuzzy, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"O primeiro paso é escoller a súa lingua preferida.\n"
"\n"
"A elección da súa lingua preferida afectaralle ó instalador, á "
"documentación,\n"
"e ó sistema en xeral. Primeiro seleccione a rexión na que está situado, e\n"
"despois o idioma que fala.\n"
"\n"
"Se clica no botón \"%s\" poderá seleccionar outras linguas para instalalas\n"
"na súa estación de traballo, instalando deste xeito os ficheiros "
"específicos\n"
"desas linguas para a documentación do sistema e as aplicacións. Por "
"exemplo,\n"
"se van usar a súa máquina usuarios Españois, seleccione Inglés coma a "
"lingua\n"
"predeterminada na árbore e \"%s\" na sección Avanzado.\n"
"\n"
"Acerca do soporte de UTF-8 (unicode): Unicode é unha nova codificación de\n"
"caracteres pensada para cubrir tódalas linguas existentes. Sen embargo o\n"
"soporte completo para ela en GNU/Linux ainda se está desenvolvendo. Por\n"
"esta razón, o uso de UTF-8 en Mandriva Linux dependerá das eleccións do\n"
"usuario:\n"
"\n"
" * Se selecciona unha lingua cunha codificación  strong legacy encoding (as "
"linguas latin1, Ruso, Xaponés, Chinés, Coreano, Tai, Grego, Turco, a maioría "
"das linguas iso-8859-2), usarase a codificación  legacy de xeito "
"predeterminado;\n"
"\n"
" * As outras lingua usarán unicode de xeito predeterminado;\n"
"\n"
" * Se se requiren dúas ou máis linguas, e estas linguas non usan a mesma\n"
"codificación, entón usarase unicode para todo o sistema;\n"
"\n"
" * Por último, pode forzarse o uso de unicode en todo o sistema a petición "
"do\n"
"usuario seleccionando a opción \"%s\" independentemente das linguas que\n"
"se escolleran.\n"
"\n"
"Teña en conta que non está limitado a elixir só unha lingua adicional. "
"Vostede\n"
"pode escoller varias, ou incluso instalalas todas marcando o cadro \"%s\".\n"
"A selección do soporte para unha lingua significa que se instalarán as\n"
"traduccións, fontes, correctores ortográficos, etc. desa lingua.\n"
"\n"
"Para cambiar entre as diferentes linguas instaladas no seu sistema, pode\n"
"executar o comando \"localedrake\" coma \"root\" para cambiar a lingua\n"
"de todo o sistema. Se executa o comando coma un usuario normal só\n"
"cambiará a lingua dese usuario determinado."

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Español"

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"Normalmente, DrakX non ten problemas ó detectar o número de botóns\n"
"do seu rato. Se os ten, suporá que ten un rato de dous botóns e\n"
"configurarao para que emule o terceiro botón. Nun rato de dous botóns\n"
"o terceiro botón pode obterse premendo simultáneamente os botóns\n"
"dereito e esquerdo do rato. DrakX recoñecerá automáticamente se o\n"
"seu rato usa unha interface PS/2, serie ou USB.\n"
"\n"
"Se vostede ten un rato de 3 botóns sen roda, pode escoller o rato\n"
"\"%s\". DrakX configurará entón o seu rato de xeito que poida simular\n"
"a roda: para facer isto, prema o botón do medio e mova o punteiro do\n"
"rato arriba e abaixo.\n"
"\n"
"Se por algunha razón desexa especificar un tipo de rato diferente,\n"
"seleccióneo da lista que se proporciona.\n"
"\n"
"Pode seleccionar a entrada \"%s\" para elixir un tipo de rato ``xenérico''\n"
"que funcionará con case tódolos ratos.\n"
"\n"
"Se elixe un rato diferente do predeterminado, amosarase unha pantalla\n"
"de probas. Use os botóns e a roda para verificar que a configuración é\n"
"correcta e que o rato está funcionando correctamente. Se o rato non\n"
"está funcionando ben, prema a barra de espacio ou a tecla [Retorno]\n"
"para cancelar a proba e volver á lista de ratos.\n"
"\n"
"De cando en vez a roda do rato non se detecta automáticamente, así\n"
"que terá que seleccionar o seu rato na lista. Asegúrese de seleccionar\n"
"o correspondente ó porto no que está conectado o seu rato. Despois\n"
"de seleccionar un rato e premer o botón \"%s\", Amosarase unha imaxe\n"
"dun rato na pantalla. Mova a roda do rato para asegurarse de que se\n"
"activa correctamente. Mentres move a roda do seu rato verá que se\n"
"move a roda da imaxe da pantalla. Comprobe os botóns e verifique que\n"
"o punteiro do rato se move pola pantalla mentres move o seu rato."

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "con emulación da Roda"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Universal | Calquera rato PS/2 & USB"

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Seleccione o porto correcto. Por exemplo, o porto\n"
"\"COM1\" de Windows chámase \"ttyS0\" en GNU/Linux."

#: help.pm:688
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Esta é a decisión máis importante para a seguridade do seu sistema\n"
"GNU/Linux: debe introducir o contrasinal de \"root\". \"Root\" é o\n"
"administrador do sistema e é o único usuario autorizado para facer\n"
"actualizacións, engadir usuarios, cambiar a configuración de todo o "
"sistema,\n"
"etc. En poucas palabras, \"root\" pode facer de todo! Por isto debe "
"escoller\n"
"un contrasinal que sexa difícil de adiviñar: DrakX diralle se o contrasinal "
"que\n"
"elixiu é demasiado sinxelo. Como pode ver, non está obrigado a introducir "
"un\n"
"contrasinal, pero recomendámoslle que introduza un. GNU/Linux é tan\n"
"propenso ós erros do operador coma calquera outro sistema operativo. Xa que\n"
"\"root\" pode superar tódalas limitacións e eliminar de xeito non "
"intencionado\n"
"tódolos datos das particións ó acceder sen coidado ás propias particións, é\n"
"importante que sexa difícil chegar a ser \"root\".\n"
"\n"
"O contrasinal debería ser unha mestura de caracteres alfanuméricos e ter "
"unha\n"
"lonxitude mínima de 8 caracteres. Nunca escriba nun papel o contrasinal de\n"
"\"root\" -- isto fai que sexa moito máis sinxelo comprometer o seu sistema.\n"
"\n"
"Un consello: non faga que o contrasinal sexa moi longo ou complicado porque\n"
"terá que ser capaz de lembrarse del!\n"
"\n"
"O contrasinal non se amosará na pantalla mentres o escribe. Para reducir as\n"
"posibilidades dun erro ó escribilo terá que introducilo contrasinal dúas "
"veces.\n"
"Se comete dúas veces o mesmo erro de escritura, terá que usar este "
"contrasinal\n"
"``incorrecto'' a primeira vez que entre coma \"root\".\n"
"\n"
"Se desexa que un servidor de autenticación controle o acceso ó seu "
"ordenador,\n"
"clique no botón \"%s\".\n"
"\n"
"Se a súa rede usa servicios de autenticación contra LDAP, NIS, ou un PDC\n"
"dun Dominio Windows, seleccione o axeitado de \"%s\". Se non sabe cal usar,\n"
"deberialle preguntar ó administrador da súa rede.\n"
"\n"
"Se ten problemas para lembrar o contrasinal, ou se o seu ordenador nunca\n"
"vai estar conectado á Internet e confía en tódalas persoas que usan o seu\n"
"ordenador, pode elixir \"%s\"."

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "autenticación"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
"Un cargador de arrinqueé un pequeno programa que inicia o ordenador ó\n"
"arrincar. É o responsable de arrincar o sistema enteiro. Normalmente, a\n"
"instalación do cargador de arrinque é totalmente automática. DrakX\n"
"analisará o sector de arrinque do disco e actuará de acordo co que atope\n"
"alí:\n"
"\n"
" * se atopa un sector de arrinque de Windows, remprazarao cun sector de\n"
"arrinque de GRUB/LILO. Deste xeito poderá arrincar GNU/Linux ou\n"
"calquera outro sistema operativo que teña instalado no seu ordenador.\n"
" * se atopa un sector de arrinque de GRUB ou LILO, remprazarao cun novo.\n"
"\n"
"Se DrakX non pode determinar onde debe situar o sector de arrinque, \n"
"preguntaralle onde o debe situar. Xeralmente, \"%s\" é o mellor lugar.\n"
"Se escolle \"%s\" non se instalará ningún cargador de arrinque. Use esta\n"
"opción só se sabe o que está facendo."

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"Agora é a hora de seleccionar un sistema de impresión para o seu\n"
"ordenador. Pode ser que outros sistemas operativos lle ofrezan un, pero\n"
"Mandriva Linux ofrécelle dous. Cada un dos sistemas de impresión está\n"
"máis adaptado a determinados tipos de configuración.\n"
"\n"
" * \"%s\" -- que é un acrónimo de ``print, do not queue'', é a elección\n"
"perfecta se vostede ten unha conexión directa á súa impresora, desexa\n"
"esquecerse de impresoras saturadas, e non ten impresoras de rede.\n"
"(\"%s\" só manexará casos de redes moi sinxelas e é algo lento cando\n"
"se usa sen redes.) É recomendable que use \"pdq\" se esta é a súa\n"
"primeira experiencia con GNU/Linux.\n"
"\n"
" * \"%s\" significa `` Common Unix Printing System'' e é unha elección\n"
"excelente para imprimir na súa impresora local ou nunha que estea no outro\n"
"cabo do planeta . É fácil de configurar e pode actuar coma un servidor ou\n"
"coma un cliente para o antigo sistema de impresión \"lpd\", así que é\n"
"compatible con antigos sistemas operativos os cales ainda poden necesitar\n"
"servicios de impresión. Ainda que é bastante potente, a configuración\n"
"básica é case tan sinxela coma a de \"pdq\". Se necesita emular un\n"
"servidor \"lpd\", asegúrese de que activa o daemon \"cups-lpd\". \"%s\"\n"
"inclúe interfaces gráficas para imprimir ou escoller as opcións da "
"impresora\n"
"e para administrar a impresora.\n"
"\n"
"Se elixe un agora, e máis tarde se da conta de que non lle gusta o seu\n"
"sistema de impresión poderá cambialo executando PrinterDrake dende o\n"
"Centro de Control de Mandriva Linux e clicando no botón \"%s\"."

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Experto"

#: help.pm:768
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX detectará primeiro calquera dispositivo IDE presente no seu "
"ordenador.\n"
"Tamén buscará unha ou máis tarxetas SCSI PCI no seu sistema. Se se atopa\n"
"unha tarxeta SCSI, DrakX instalará automáticamente o driver axeitado.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"Se DrakX non é quen de    probe for the options    para determinar "
"automáticamente que parámetros necesita pasarlle ó hardware, terá que "
"configurar o driver a man."

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": se se detecta unha tarxeta de son no seu sistema, amosarase\n"
"aquí. Se ve que a tarxeta de son non é a que ten posta no seu sistema,\n"
"pode clicar no botón e escoller un driver diferente."

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
#: install_steps_interactive.pm:1037
#, c-format
msgid "Sound card"
msgstr "Tarxeta de son"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"DrakX presentaralle un resumo da información que reuniu sobre o seu\n"
"sistema para que a repase. Dependendo do hardware que teña instalado\n"
"na súa máquina, aparecerán ou non algunhas das seguintes entradas.\n"
"Cada entrada está composta do elemento do hardware que se configurou,\n"
"seguido por un pequeno resumo da configuración actual. Clique no botón\n"
"\"%s\" correspondente para cambiala.\n"
"\n"
" * \"%s\": comprobe a configuración actual do mapa de teclado e cámbiea\n"
"se fose necesario.\n"
"\n"
" * \"%s\": comprobe o país seleccionado. Se non está neste país, clique\n"
"no botón \"%s\" e elixa outro. Se o seu país non está na lista que se\n"
"amosa, clique no botón \"%s\" para obter a lista completa de paises.\n"
"\n"
" * \"%s\": por defecto, DrakX deduce a súa zona horaria baseándose no\n"
"país que elixiu. Pode clicar no botón \"%s\" se non é a correcta.\n"
"\n"
" * \"%s\": verifique a configuración actual do rato e clique no botón para\n"
"cambiala se fose necesario.\n"
"\n"
" * \"%s\": se clica no botón \"%s\" abrirase o asistente de configuración\n"
"de impresoras. Consulte o capítulo correspondente da ``Starter Guide''\n"
"para obter máis información sobre como configurar unha nova impresora.\n"
"A interface do manual é semellante á que se usa durante a instalación.\n"
"\n"
" * \"%s\": se se detecta unha tarxeta de son no seu sistema, amosarase\n"
"aquí. Se ve que a tarxeta de son non é a que está no seu ordenador,\n"
"pode clicar no botón e elixir un driver diferente.\n"
"\n"
" * \"%s\": se ten unha tarxeta de TV, aquí ó onde se mostra a información\n"
"sobre a súa configuración. Se ten unha tarxeta de TV e non se detectou,\n"
"clique en \"%s\" para intentar configurala a man.\n"
"\n"
" * \"%s\": pode clicar en \"%s\" para cambia-los parámetros asociados\n"
"ca tarxeta se cre que a configuración non é correcta.\n"
"\n"
" * \"%s\": por defecto, DrakX configura a súa interface gráfica cunha\n"
"resolución \"800x600\" ou \"1024x768\". Se isto non se adapta a vostede,\n"
"clique en \"%s\" para volver a configurar a súa interface gráfica.\n"
"\n"
" * \"%s\": se desexa configurar o seu acceso á Internet ou a unha rede\n"
"local, pode facelo agora. Consulte a documentación impresa ou use o\n"
"Centro de Control de Mandriva Linux despois de rematar a instalación para\n"
"sacar partido da axuda in-line.\n"
"\n"
" * \"%s\": permítelle configurar os enderezos do proxy HTTP e FTP no\n"
"caso de que a máquina na que está instalando vaia estar detrás detrás\n"
"dun servidor proxy.\n"
"\n"
" * \"%s\": esta entrada permítelle volver definir o nivel de seguridade que\n"
"se estableceu nun dos pasos anteriores.\n"
"\n"
" * \"%s\": se pensa conectar a súa máquina á Internet, é unha boa idea\n"
"protexela de intrusos configurando un cortalumes. Consulte a sección\n"
"correspondente da ``Starter Guide'' para obter detalles sobre a\n"
"configuración do cortalumes.\n"
"\n"
" * \"%s\": se desexa cambiar a configuración do seu cargador de arrinque,\n"
"clique neste botón. Isto deberíano facer só os usuarios avanzados.\n"
"Consulte a documentación impresa ou a axuda in-line sobre a\n"
"configuración do cargador de arrinque no Centro de Control de Mandriva\n"
"Linux.\n"
"\n"
" * \"%s\": a través desta entrada pode especificar cales servicios se\n"
"executarán na súa máquina. Se ten pensado usar esta máquina coma\n"
"un servidor sería unha boa idea revisar esta configuración."

#: help.pm:855 install_steps_interactive.pm:884
#: install_steps_interactive.pm:979 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Zona horaria"

#: help.pm:855 install_steps_interactive.pm:1053
#, c-format
msgid "TV card"
msgstr "Tarxeta de TV"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "Tarxeta RDSI"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Interface Gráfica"

#: help.pm:855 install_any.pm:1735 install_steps_interactive.pm:1071
#: standalone/drakbackup:2040
#, c-format
msgid "Network"
msgstr "Rede"

#: help.pm:855 install_steps_interactive.pm:1083
#, c-format
msgid "Proxies"
msgstr "Proxys"

#: help.pm:855 install_steps_interactive.pm:1094
#, c-format
msgid "Security Level"
msgstr "Nivel de Seguridade"

#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr "Cortalumes"

#: help.pm:855 install_steps_interactive.pm:1124
#, c-format
msgid "Bootloader"
msgstr "Cargador de Arrinque"

#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "Servicios"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Elixa o disco duro que desexa borrar para poder crear a súa nova partición\n"
"Mandriva Linux. Teña tino, porque se perderán tódolos datos da unidade e\n"
"non se poderán volver recuperar!"

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Prema en \"%s\" se desexa borrar tódolos datos e particións presentes\n"
"neste disco duro. Teña tino, despois de premer en \"%s\", non poderá\n"
"recuperar ningún dato ou partición presente neste disco duro, incluindo\n"
"calquera dato de Windows.\n"
"\n"
"Prema en \"%s\" para saír sen perder ningún dato ou partición presentes\n"
"neste disco duro."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Seguinte ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Anterior"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Tamén debe formatar %s"

#: install_any.pm:407
#, c-format
msgid "Do you have further supplementary media?"
msgstr "Ten soportes suplementarios adicionais?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:410
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"Atopáronse os seguintes soportes e usaranse mentres se instala: %s.\n"
"\n"
"\n"
"Ten soportes de instalación suplementarios para configurar?"

#: install_any.pm:423 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:423
#, c-format
msgid "Network (HTTP)"
msgstr "Rede (HTTP)"

#: install_any.pm:423
#, c-format
msgid "Network (FTP)"
msgstr "Rede (FTP)"

#: install_any.pm:423
#, c-format
msgid "Network (NFS)"
msgstr "Rede (NFS)"

#: install_any.pm:453
#, c-format
msgid "Insert the CD 1 again"
msgstr "Insira o CD 1 outra vez"

#: install_any.pm:479 network/netconnect.pm:862 standalone/drakbackup:114
#, c-format
msgid "No device found"
msgstr "Non se atoparon dispositivos"

#: install_any.pm:484
#, c-format
msgid "Insert the CD"
msgstr "Insira o CD"

#: install_any.pm:489
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "Non foi posible montar o CDROM"

#: install_any.pm:522 install_any.pm:543
#, c-format
msgid "URL of the mirror?"
msgstr "URL do sitio espello?"

#: install_any.pm:527
#, c-format
msgid "NFS setup"
msgstr "Configuración de NFS"

#: install_any.pm:527
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:528
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:528 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "Directorio"

#: install_any.pm:581
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Non se puido atopar o ficheiro hdlist neste sitio espello"

#: install_any.pm:658
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr ""

#: install_any.pm:700
#, c-format
msgid "Looking at packages already installed..."
msgstr "Buscando os paquetes que xa están instalados..."

#: install_any.pm:704
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Buscando paquetes para actualizalos..."

#: install_any.pm:782
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Cambie o Cd-Rom!\n"
"Insira o Cd-Rom que teña a etiqueta \"%s\" na unidade e prema Aceptar."

#: install_any.pm:794
#, c-format
msgid "Copying in progress"
msgstr "Copiando"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:937
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Seleccionou os seguintes servidores: %s\n"
"\n"
"\n"
"Estes servidores están activados por defecto. Non teñen ningún problema de\n"
"seguridade coñecido, pero pode ser que se lles atopen algúns. Nese caso,\n"
"debe asegurarse de actualizar tan rápido como sexa posible.\n"
"\n"
"\n"
"Desexa instalar estes servidores?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:960
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Eliminaranse os seguintes paquetes para poder actualiza-lo seu sistema: %s\n"
"\n"
"\n"
"¿Desexa eliminar estes paquetes?\n"

#: install_any.pm:1396 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "Erro ó le-lo ficheiro %s"

#: install_any.pm:1630
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "- eliminouse %s\n"

#: install_any.pm:1632
#, c-format
msgid "%s (previously named as %s)"
msgstr ""

#: install_any.pm:1672
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos "
"sistemas de ficheiros. Verifique o seu equipo para atopa-la razón deste "
"problema"

#: install_any.pm:1716
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1716
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1716
#, c-format
msgid "NFS"
msgstr "SMB"

#: install_any.pm:1739
#, c-format
msgid "Please choose a media"
msgstr "Escolla un soporte"

#: install_any.pm:1755
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "O ficheiro xa existe. ¿Desexa sobrescribilo?"

#: install_any.pm:1759
#, c-format
msgid "Permission denied"
msgstr "Permiso denegado"

#: install_any.pm:1808
#, c-format
msgid "Bad NFS name"
msgstr "Nome NFS incorrecto"

#: install_any.pm:1829
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "engadiuse o soporte %s"

#: install_any.pm:1879
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Non se pode captura-la pantalla antes de face-las particións"

#: install_any.pm:1886
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""
"Pode escoller outras linguas que estarán dispoñibles trala instalación en %s"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Instalación do sistema"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Configuración do sistema"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Algún hardware do seu ordenador necesita drivers ``propietarios''\n"
"para funcionar. Pode atopar máis información sobre eles en: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Ten que ter unha partición raíz.\n"
"Para iso, cree unha partición (ou clique nunha que xa exista).\n"
"Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Non ten unha partición de intercambio\n"
"\n"
"¿Desexa continuar de calquera xeito?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Debe ter unha partición FAT montada en /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Non hai espacio libre dabondo para asignar novas particións"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Usar particións existentes"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Non hai ningunha partición existente para usar"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Usar a partición de Windows para loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "¿Que partición desexa usar para Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Escolla os tamaños"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Tamaño da partición raíz en MB: "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Tamaño da partición de intercambio en MB: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Non hai particións FAT para usar coma loopback (ou non hai espacio nelas)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "¿Qué partición desexa redimensionar?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"O redimensionador de FAT non é capaz de manexa-la súa partición,\n"
"ocorreu o seguinte erro: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Calculando o tamaño da partición de Windows"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"A partición de Windows está demasiado fragmentada. Por favor reinicie o seu "
"sistema con Windows, execute a utilidade ``defrag'', e despois reinicie a "
"instalación de Mandriva Linux."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"¡ADVERTENCIA!\n"
"\n"
"O DrakX vai redimensiona-la partición de Windows agora. Teña coidado:\n"
"esta operación é perigosa. Se aínda non o fixo, necesita sair da\n"
"instalación primeiro, executar \"chkdsk c:\" nun Intérprete de Comandos\n"
"en Windows (Teña coidado, executa-lo programa gráfico \"scandisk\")\n"
"non é dabondo, ¡asegúrese de usar \"chkdsk\" nun Intérprete de\n"
"Comandos!), e opcionalmente o defrag, e reinicia-la instalación.\n"
"Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n"
"Cando estea seguro, prema Aceptar."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "¿Que tamaño desexa manter para o Windows en"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "partición %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Redimensionando a partición de Windows"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "O redimensionamento da FAT fallou: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"Non hai particións FAT para redimensionar (ou non hai espacio libre dabondo)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Elimina-lo Windows(TM)"

#: install_interactive.pm:213
#, fuzzy, c-format
msgid "Erase and use entire disk"
msgstr "Borra-lo disco enteiro"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"Ten máis dunha unidade de disco duro, ¿en cal delas desexa instalar linux?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Perderanse TODALAS particións existentes e os seus datos na unidade %s"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "Usar fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Agora pode particionar %s.\n"
"Cando remate, non esqueza gardar usando `w'"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "Non se pode atopar espacio para a instalación"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "O Asistente de Particionamento do DrakX atopou as seguintes solucións:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "O particionamento fallou: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "Activando a rede"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "Desactivando a rede"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"Advertencia: O Software Libre non ten por que estar libre de patentes, e "
"parte\n"
"do Software Libre incluído pode estar suxeito a patentes no seu país. Por\n"
"exemplo, os decodificadores MP3 incluídos poden requirir unha licenza para "
"o\n"
"seu uso (mire http://www.mp3licensing.com para obter máis detalles). Se non\n"
"está seguro de se lle pode afectar unha patente, verifique as súas leis "
"locais."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Advertencia\n"
"\n"
"Por favor, lea con tino os termos de embaixo. Se non está de acordo con\n"
"algunha parte, non se lle permite instalar o seguinte CD. Prema 'Rexeitar'\n"
"para continua-la instalación sen usar eses soportes.\n"
"\n"
"\n"
"Algúns dos compoñentes contidos no seguinte CD non están rexidos\n"
"pola Licenza GPL ou documentos semellantes. Cada un deses\n"
"compoñentes réxese polos termos e condicións da súa propia licenza\n"
"específica. Por favor, lea con tino e cumpra cada unha desas licenzas\n"
"específicas antes de usar ou redistribuír ditos compoñentes.\n"
"Tales licenzas impedirán en xeral a transferencia, duplicación (agás co\n"
"propósito da copia de seguridade), redistribución, enxeñería inversa, \n"
"desensamblamento, descompilación ou modificación do compoñente. \n"
"Calquera infracción do contrato terminará inmediatamente cos seus dereitos\n"
"baixo esa licenza específica. A non ser que os termos desa licenza\n"
"específica lle conceda ditos dereitos, normalmente non poderá instala-los\n"
"programas en máis dun sistema, ou adaptalos para usalos nunha rede. Se\n"
"ten dúbidas, por favor, contacte directamente co distribuidor ou editor do\n"
"compoñente. \n"
"A transferencia a terceiras partes ou a copia de ditos compoñentes\n"
"incluíndo a documentación está normalmente prohibida.\n"
"\n"
"\n"
"Tódolos dereitos dos compoñentes do seguinte CD pertenden ós seus\n"
"respectivos autores e están protexidos polas leis de propiedade intelectual\n"
"e de copyright aplicables ó software.\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"Noraboa, rematou a instalación.\n"
"Quite o disco de arrinque da unidade e prema Intro para reiniciar.\n"
"\n"
"\n"
"Para información sobre parches dispoñibles para esta versión\n"
"de Mandriva Linux, consulte as erratas dispoñibles en:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Para información sobre a configuración do seu sistema, despois\n"
"da instalación, hai un capítulo na Guía de Usuario Oficial de Mandriva Linux."

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "Punto de montaxe %s duplicado"

#: install_steps.pm:481
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Algúns paquetes importantes non se instalaron correctamente.\n"
"A unidade de cdrom ou o cdrom están defectuosos.\n"
"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl media/main/*."
"rpm\"\n"

#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Entrando na etapa '%s'\n"

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"O seu sistema ten poucos recursos. Pode que teña algún problema\n"
"ó instala-lo Mandriva Linux. Se iso acontece, pode intenta-la instalación\n"
"en modo texto.  Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
"'text'."

#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
#, c-format
msgid "Package Group Selection"
msgstr "Selección dos Grupos de Paquetes"

#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Tamaño total: %d / %d MB"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "Paquete erróneo"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "Versión: "

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "Tamaño: "

#: install_steps_gtk.pm:302
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:303
#, c-format
msgid "Importance: "
msgstr "Importancia: "

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "Non pode seleccionar/deseleccionar este paquete"

#: install_steps_gtk.pm:340 network/thirdparty.pm:329
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "falla o kdesu"

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr "debido a %s non satisfeitas"

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:343
#, c-format
msgid "in order to keep %s"
msgstr ""

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
"instalalo"

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "Vanse instala-los seguintes paquetes"

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "Vanse elimina-los seguintes paquetes"

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Este é un paquete obrigatorio, non se pode deseleccionar"

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "Non pode deseleccionar este paquete. Xa está instalado"

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Este paquete ten que ser actualizado\n"
"¿Está seguro de que quere deseleccionalo?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr "Amosa-los paquetes seleccionados automáticamente"

#: install_steps_gtk.pm:394
#, c-format
msgid "Load/Save selection"
msgstr "Cargar/Gardar a selección"

#: install_steps_gtk.pm:395
#, c-format
msgid "Updating package selection"
msgstr "Actualizando a selección de paquetes"

#: install_steps_gtk.pm:400
#, c-format
msgid "Minimal install"
msgstr "Instalación minima"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
#, c-format
msgid "Choose the packages you want to install"
msgstr "Escolla os paquetes que desexa instalar"

#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
#, c-format
msgid "Installing"
msgstr "Instalando"

#: install_steps_gtk.pm:457
#, c-format
msgid "No details"
msgstr "Sen detalles"

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "Tempo restante "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "Estimando"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d paquetes"

#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738
#, c-format
msgid "Refuse"
msgstr "Rexeitar"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Cambie o Cd-Rom!\n"
"Insira o Cd-Rom que teña a etiqueta \"%s\" na unidade e prema Aceptar.\n"
"Se non o ten, prema Cancelar para omiti-la instalación deste Cd-Rom."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
#, c-format
msgid "There was an error ordering packages:"
msgstr "Houbo un erro ó ordena-los paquetes:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
#, c-format
msgid "There was an error installing packages:"
msgstr "Houbo un erro ó instala-los paquetes:"

#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
#: install_steps_interactive.pm:757
#, c-format
msgid "Go on anyway?"
msgstr "¿Seguir de tódolos xeitos?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Resumo"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
#: install_steps_interactive.pm:1084
#, c-format
msgid "not configured"
msgstr "non configurado"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"Atopáronse os seguintes soportes de instalación.\n"
"Se desexa saltar algún deles, pode deseleccionalo agora."

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""
"Ten a opción de copiar os contidos dos CDs ó disco duro antes da "
"instalación.\n"
"Esta continuará despois dende o disco duro e os paquetes permanecerán "
"dispoñibles unha vez que o sistema xa estea instalado."

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr "Copiar CDs enteiros"

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "Acordo da licencia"

#: install_steps_interactive.pm:89
#, c-format
msgid "Release Notes"
msgstr "Notas da Versión"

#: install_steps_interactive.pm:120
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Escolla a disposición do seu teclado."

#: install_steps_interactive.pm:122
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "Esta é a lista completa dos teclados dispoñibles"

#: install_steps_interactive.pm:152
#, c-format
msgid "Install/Upgrade"
msgstr "Instalar/Actualizar"

#: install_steps_interactive.pm:153
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "¿É isto unha instalación ou unha actualización?"

#: install_steps_interactive.pm:159
#, c-format
msgid "Upgrade %s"
msgstr "Actualizar %s"

#: install_steps_interactive.pm:172
#, c-format
msgid "Encryption key for %s"
msgstr "Clave de cifrado para %s"

#: install_steps_interactive.pm:195
#, c-format
msgid "Please choose your type of mouse."
msgstr "Por favor, escolla o seu tipo de rato."

#: install_steps_interactive.pm:196
#, c-format
msgid "Mouse choice"
msgstr "Elección de rato"

#: install_steps_interactive.pm:205 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Porto do Rato"

#: install_steps_interactive.pm:206 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Por favor, escolla o porto serie onde está conectado o seu rato."

#: install_steps_interactive.pm:216
#, c-format
msgid "Buttons emulation"
msgstr "Emulación dos botóns"

#: install_steps_interactive.pm:218
#, c-format
msgid "Button 2 Emulation"
msgstr "Emulación do Botón 2"

#: install_steps_interactive.pm:219
#, c-format
msgid "Button 3 Emulation"
msgstr "Emulación do Botón 3"

#: install_steps_interactive.pm:240
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:240
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Configurando as tarxetas PCMCIA..."

#: install_steps_interactive.pm:247
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:247
#, c-format
msgid "Configuring IDE"
msgstr "Configurando o IDE"

#: install_steps_interactive.pm:267
#, c-format
msgid "No partition available"
msgstr "Non hai ningunha partición dispoñible"

#: install_steps_interactive.pm:270
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Examinando as particións para atopa-los puntos de montaxe"

#: install_steps_interactive.pm:277
#, c-format
msgid "Choose the mount points"
msgstr "Escolla os puntos de montaxe"

#: install_steps_interactive.pm:323
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:328
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""

#: install_steps_interactive.pm:364
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Elixa as particións que desexa formatar"

#: install_steps_interactive.pm:366
#, c-format
msgid "Check bad blocks?"
msgstr "Comproba-los bloques erróneos?"

#: install_steps_interactive.pm:394
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Fallo ó verificar o sistema de ficheiros %s. Desexa reparar os erros? (teña "
"coidado, pode perder datos)"

#: install_steps_interactive.pm:397
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Non hai espacio de intercambio (swap) dabondo para levar a cabo a "
"instalación, engada algún"

#: install_steps_interactive.pm:406
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
"Buscando os paquetes dispoñibles e reconstruindo a base de datos rpm..."

#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
#, c-format
msgid "Looking for available packages..."
msgstr "Buscando os paquetes dispoñibles..."

#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Escolla un espello dende o que consegui-los paquetes"

#: install_steps_interactive.pm:468
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"O seu sistema non ten espacio libre dabondo para a instalación ou "
"actualización (%d > %d)"

#: install_steps_interactive.pm:502
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""

#: install_steps_interactive.pm:504
#, c-format
msgid "Load"
msgstr "Cargar"

#: install_steps_interactive.pm:504 standalone/drakbackup:4055
#: standalone/drakbackup:4125 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "Gardar"

#: install_steps_interactive.pm:512
#, c-format
msgid "Bad file"
msgstr "Ficheiro erróneo"

#: install_steps_interactive.pm:585
#, c-format
msgid "Selected size is larger than available space"
msgstr "O tamaño seleccionado é maior có tamaño dispoñible"

#: install_steps_interactive.pm:600
#, c-format
msgid "Type of install"
msgstr "Tipo de instalación"

#: install_steps_interactive.pm:601
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Non seleccionou ningún grupo de paquetes.\n"
"Por favor seleccione a instalación minima que desexa:"

#: install_steps_interactive.pm:605
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Ca documentación básica (¡recomendado!)"

#: install_steps_interactive.pm:606
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:645 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Todas"

#: install_steps_interactive.pm:684
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Se ten tódolos CDs da lista inferior, prema Aceptar.\n"
"Se non ten ningún deses CDs, prema Cancelar.\n"
"Se só faltan algúns dos CDs, desmárqueos, e prema Aceptar."

#: install_steps_interactive.pm:689
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-Rom etiquetado \"%s\""

#: install_steps_interactive.pm:714
#, c-format
msgid "Preparing installation"
msgstr "Preparando a instalación"

#: install_steps_interactive.pm:722
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instalando o paquete %s\n"
"%d%%"

#: install_steps_interactive.pm:771
#, c-format
msgid "Post-install configuration"
msgstr "Configuración trala instalación"

#: install_steps_interactive.pm:778
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:812
#, c-format
msgid "Updates"
msgstr "Actualizacións"

#: install_steps_interactive.pm:813
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"Agora pode descargar paquetes actualizados. Estes paquetes\n"
"actualizáronse despois de que saira a distribución. Poden conter\n"
"solucións de erros ou de buratos na seguridade.\n"
"\n"
"Para descargar estes paquetes, cómpre ter unha conexión á Internet que "
"funcione.\n"
"\n"
"Desexa instalar as actualizacións?"

#: install_steps_interactive.pm:834
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr ""
"Contactando co sitio web de Mandriva Linux para obte-la lista de espellos "
"dispoñibles..."

#: install_steps_interactive.pm:853
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Contactando co espello para obte-la lista dos paquetes dispoñibles..."

#: install_steps_interactive.pm:857
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Non se puido contactar co espello %s"

#: install_steps_interactive.pm:857
#, c-format
msgid "Would you like to try again?"
msgstr "¿Desexa intentalo de novo?"

#: install_steps_interactive.pm:884 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "¿Cal é a súa zona horaria?"

#: install_steps_interactive.pm:889
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Sincronización automática da hora (usando NTP)"

#: install_steps_interactive.pm:897
#, c-format
msgid "NTP Server"
msgstr "Servidor NTP"

#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
#: install_steps_interactive.pm:1136 services.pm:133
#: standalone/drakbackup:1585
#, c-format
msgid "System"
msgstr "Sistema"

#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
#: install_steps_interactive.pm:1063
#, c-format
msgid "Hardware"
msgstr "Hardware"

#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
#, c-format
msgid "Remote CUPS server"
msgstr "Servidor CUPS remoto"

#: install_steps_interactive.pm:998
#, c-format
msgid "No printer"
msgstr "Sen impresora"

#: install_steps_interactive.pm:1040
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "¿Ten unha tarxeta de son ISA?"

#: install_steps_interactive.pm:1042
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"Execute \"alsaconf\" ou \"sndconfig\" despois da instalación para configura-"
"la tarxeta de son"

#: install_steps_interactive.pm:1044
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Non se detectou ningunha tarxeta de son. Execute \"harddrake\" despois da "
"instalación"

#: install_steps_interactive.pm:1064
#, c-format
msgid "Graphical interface"
msgstr "Interface Gráfica"

#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
#, c-format
msgid "Network & Internet"
msgstr "Rede & Internet"

#: install_steps_interactive.pm:1084
#, c-format
msgid "configured"
msgstr "configurado"

#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "Seguridade"

#: install_steps_interactive.pm:1112
#, c-format
msgid "activated"
msgstr "activado"

#: install_steps_interactive.pm:1112
#, c-format
msgid "disabled"
msgstr "desactivado"

#: install_steps_interactive.pm:1123
#, c-format
msgid "Boot"
msgstr "Arrinque"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s en %s"

#: install_steps_interactive.pm:1141 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: install_steps_interactive.pm:1153
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Non configurou as X. Está seguro de que desexa isto?"

#: install_steps_interactive.pm:1234
#, c-format
msgid "Preparing bootloader..."
msgstr "Preparando o cargador de arrinque..."

#: install_steps_interactive.pm:1244
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""

#: install_steps_interactive.pm:1250
#, c-format
msgid "Do you want to use aboot?"
msgstr "¿Desexa usar aboot?"

#: install_steps_interactive.pm:1253
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Erro ó instala-lo aboot, \n"
"¿probar a forza-la instalación mesmo se iso destrúe a primeira partición?"

#: install_steps_interactive.pm:1270
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"Con este nivel de seguridade, o acceso ós ficheiros da partición Windows "
"está restrinxido ó administrador."

#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Insira un disquete baleiro na unidade %s"

#: install_steps_interactive.pm:1304
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Insira outro disquete para o disco dos drivers"

#: install_steps_interactive.pm:1306
#, c-format
msgid "Creating auto install floppy..."
msgstr "Creando un disquete de auto-instalación..."

#: install_steps_interactive.pm:1318
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Algunhas das etapas non foron completadas.\n"
"\n"
"¿Desexa sair agora?"

#: install_steps_interactive.pm:1328 standalone/draksambashare:422
#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
#: standalone/logdrake:452 standalone/logdrake:458
#, c-format
msgid "Congratulations"
msgstr "Noraboa"

#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
#, c-format
msgid "Generate auto install floppy"
msgstr "Xerar disquete de auto-instalación"

#: install_steps_interactive.pm:1338
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"A instalación automática pode ser moi automatizada\n"
"se así se desexa, nese caso tomará o control do disco\n"
"duro (isto está pensado para a instalación noutro equipo).\n"
"\n"
"Pode preferir realizar outra vez a instalación.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Instalación de Mandriva Linux %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> entre elementos  |  <Space> seleccionar  |  <F12> seguinte "

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "Escolla un ficheiro"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1129 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "Engadir"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1086
#: standalone/draksambashare:1139 standalone/draksambashare:1178
#, c-format
msgid "Modify"
msgstr "Modificar"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1087
#: standalone/draksambashare:1147 standalone/draksambashare:1186
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "Eliminar"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "Básico"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "Finalizar"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "Facer"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Elección incorrecta, inténteo de novo\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "¿A súa elección? (por omisión %s)"

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Entradas que ten que encher:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "¿A súa elección? (0/1, por omisión `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Botón `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "¿Desexa premer este botón?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "¿A súa elección? (por omisión `%s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Reenviar"

#: keyboard.pm:171 keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "Checo (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "Alemán"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:174 keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "Español"

#: keyboard.pm:175 keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "Finlandés"

#: keyboard.pm:176 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "Francés"

#: keyboard.pm:177 keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "Noruegués"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "Polaco"

#: keyboard.pm:179 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "Ruso"

#: keyboard.pm:181 keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "Sueco"

#: keyboard.pm:182 keyboard.pm:317
#, c-format
msgid "UK keyboard"
msgstr "Teclado británico"

#: keyboard.pm:183 keyboard.pm:320
#, c-format
msgid "US keyboard"
msgstr "Teclado estadounidense"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Albanés"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "Armenio (antigo)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "Armenio (máquina de escribir)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "Armenio (fonético)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "Árabe"

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Azerbaixaní (latín)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "Belga"

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "Bengalí (Disposición Inscript)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "Bengalí (Disposición Probhat)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "Búlgaro (fonético)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "Búlgaro (BDS)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "Brasileiro (ABNT-2)"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "Bosnio"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Bielorruso"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "Suízo (Disposición alemana)"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "Suízo (Disposición francesa)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Cheroqui silábico"

#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "Checo (QWERTY)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "Alemán (sen teclas acentuadas)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "Devanagari"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "Dinamarqués"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (EEUU)"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Esperanto)"

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (Francés)"

#: keyboard.pm:215
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (Reino Unido)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (Noruegués)"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (Polaco)"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (Sueco)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Dzongkha/Tibetano"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Estonio"

#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "Faroés"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "Xeorxiano (Disposición \"rusa\")"

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "Xeorxiano (Disposición \"latina\")"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "Grego"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "Grego (politónico)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "Guxarati"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "Gurmukhi"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Croata"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "Húngaro"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "Irlandés"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "Israelí"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "Israelí (Fonético)"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Iraniano"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Islandés"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "Italiano"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "Inuktitut"

#: keyboard.pm:244
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "Xaponés de 106 teclas"

#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Kannada"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "Teclado coreano"

#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "Kurdo (escritura árabe)"

#: keyboard.pm:251
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Kirguís"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "Latinoamericano"

#: keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "Laosiano"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Lituano AZERTY (antigo)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Lituano AZERTY (novo)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Lituano \"ringleira de números\" QWERTY"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Lituano \"fonético\" QWERTY"

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "Letonio"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "Malayalam"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Macedonio"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "Birmania (Birmano)"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "Mongol (cirílico)"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "Maltés (Reino Unido)"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "Maltés (Estadounidense)"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "Holandés"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "Oriya"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Polaco (disposición qwerty)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Polaco (disposición qwertz)"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "Pashto"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "Portugués"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "Canadiano (Québec)"

#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "Romanés (qwertz)"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "Romanés (qwerty)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "Ruso (Fonético)"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Saami (noruegués)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr "Saami (sueco/finlandés)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "Sindhi"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "Esloveno"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr "Sinhala"

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "Eslovaco (QWERTZ)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "Eslovaco (QWERTY)"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "Serbio (cirílico)"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "Sirio"

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "Sirio (fonético)"

#: keyboard.pm:297
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "Telugu"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "Tamil (disposición ISCII)"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Tamil (disposición de máquina de escribir)"

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "Tai (Kedmanee)"

#: keyboard.pm:302
#, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "Tai (TIS-820)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "Tai (Pattachote)"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr "Tifinagh (disposición marroquí) (+latin/árabe)"

#: keyboard.pm:308
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr "Tifinagh (fonético) (+latin/árabe)"

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Taxik"

#: keyboard.pm:312
#, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "Turcomán"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "Turco (modelo tradicional \"F\")"

#: keyboard.pm:314
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "Turco (modelo moderno \"Q\")"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "Ucraíno"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Teclado urdu"

#: keyboard.pm:321
#, c-format
msgid "US keyboard (international)"
msgstr "Teclado estadounidense (internacional)"

#: keyboard.pm:322
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Uzbeco (cirílico)"

#: keyboard.pm:324
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamita \"ringleira de números\" QWERTY"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "Iugoslavo (latín)"

#: keyboard.pm:332
#, c-format
msgid "Right Alt key"
msgstr "Tecla Alt dereita"

#: keyboard.pm:333
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "As dúas teclas Shift simultáneamente"

#: keyboard.pm:334
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "As teclas Control e Shift simultáneamente"

#: keyboard.pm:335
#, c-format
msgid "CapsLock key"
msgstr "Tecla BloqMayús (CapsLock)"

#: keyboard.pm:336
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Teclas Shift e BloqMayús (CapsLock) simultáneamente"

#: keyboard.pm:337
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Teclas Ctrl e Alt simultáneamente"

#: keyboard.pm:338
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Teclas Alt e Shift simultáneamente"

#: keyboard.pm:339
#, c-format
msgid "\"Menu\" key"
msgstr "Tecla \"Menú\""

#: keyboard.pm:340
#, c-format
msgid "Left \"Windows\" key"
msgstr "Tecla \"Windows\" esquerda"

#: keyboard.pm:341
#, c-format
msgid "Right \"Windows\" key"
msgstr "Tecla \"Windows\" dereita"

#: keyboard.pm:342
#, c-format
msgid "Both Control keys simultaneously"
msgstr "As dúas teclas Control simultáneamente"

#: keyboard.pm:343
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "As dúas teclas Alt simultáneamente"

#: keyboard.pm:344
#, c-format
msgid "Left Shift key"
msgstr "Tecla Shift esquerda"

#: keyboard.pm:345
#, c-format
msgid "Right Shift key"
msgstr "Tecla Shift dereita"

#: keyboard.pm:346
#, c-format
msgid "Left Alt key"
msgstr "Tecla Alt esquerda"

#: keyboard.pm:347
#, c-format
msgid "Left Control key"
msgstr "Tecla Control esquerda"

#: keyboard.pm:348
#, c-format
msgid "Right Control key"
msgstr "Tecla Control dereita"

#: keyboard.pm:384
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Aquí pode elixir a tecla ou a combinación de teclas que lle\n"
"permitirán cambir entre as diferentes disposicións de teclado\n"
"(p.ex: latin e non latin)"

#: keyboard.pm:389
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"Está configuración activarase despois da instalación.\n"
"Durante a instalación, terá que usar a tecla Control dereita\n"
"para cambiar entre as diferentes disposicións de teclado."

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "Emiratos Árabes Unidos"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "Afganistán"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antiga e Barbuda"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "Anguila"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "Albania"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "Armenia"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "Antillas Neerlandesas"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "Angola"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "Antártida"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Arxentina"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "Samoa Americana"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "Acerbaixán"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnia-Hercegovina"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "Bulgaria"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "Burundi"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "Benín"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "Illas Bermudas"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "Bolivia"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "Bahamas"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "Bután"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "Illa Bouvet"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "Botsuana"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "Bielorrusia"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "Belice"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Illas Cocos"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Congo (Kinshasa)"

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "República Centroafricana"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Congo (Brazzaville)"

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "Costa de Marfil"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "Illas Cook"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "Chile"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "Camerún"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "China"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "Colombia"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "Serbia e Montenegro"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "Cuba"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "Cabo Verde"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "Illa Christmas"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "Chipre"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "Xibutí"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "Dominica"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "República Dominicana"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "Alxeria"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "Ecuador"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "Exipto"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "Sahara Occidental"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "Eritrea"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "Etiopía"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "Fidxi"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Illas Malvinas (Falkland)"

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "Micronesia"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "Illas Feroe"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "Gabón"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "Reino Unido"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "Granada"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "Xeorxia"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "Güiana Francesa"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "Gana"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "Xibraltar"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "Grenlandia"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "Gambia"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "Guinea"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Guadalupe"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "Guinea Ecuatorial"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Illas Xeorxia do Sur e Sandwich do Sur"

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "Guatemala"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinea Bisau"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "Güiana"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "Hong Kong (China)"

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Illas Heard e McDonald"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "Honduras"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "Croacia"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "Haití"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "Indonesia"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "India"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Territorios Británicos do Océano Índico"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "Iraq"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "Irán"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "Islandia"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "Xamaica"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "Xordania"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "Quenia"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgizstán"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "Camboia"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "Comores"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts e Nevis"

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "Corea do Norte"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "Corea do Sur"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "Kuvait"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "Illas Caimán"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "Kazakhstán"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "Líbano"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "Santa Lucía"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "Liberia"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "Lesoto"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "Lituania"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "Luxemburgo"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "Letonia"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "Libia"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "Marrocos"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "Mónaco"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "Moldavia"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "Madagascar"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "Illas Marshall"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "Macedonia"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "Malí"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "Birmania"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "Mongolia"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "Illas Marianas do Norte"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "Martinica"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "Mauritania"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "Mauricio"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "Maldivas"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "Malaui"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "México"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "Malaisia"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "Mozambique"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "Namibia"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "Nova Caledonia"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "Níxer"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "Illa Norfolk"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "Nixeria"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "Nicaragua"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "Nauru"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "Omán"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "Panamá"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "Perú"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "Polinesia Francesa"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "Papúa-Nova Guinea"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "Filipinas"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "Paquistán"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre e Miquelon"

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "Porto Rico"

#: lang.pm:369
#, c-format
msgid "Palestine"
msgstr "Palestina"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "Paraguai"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "Palau"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "Qatar"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "Reunión"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "Romania"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "Ruanda"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "Arabia Saudí"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "Illas Salomón"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "Sudán"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "Singapur"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr "Santa Helena"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "Eslovenia"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Illas Svalbard e Jan Mayen"

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "Serra Leoa"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "San Marino"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "Somalia"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "Surinam"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "San Tomé e Príncipe"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "O Salvador"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "Siria"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "Suazilandia"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Illas Turks e Caicos"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "Chad"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "Territorios Franceses do Sur"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "Togo"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "Taxikistán"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "Toquelau"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "Timor Oriental"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "Turkmenistán"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "Tunicia"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "Turquía"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trindade e Tobago"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "Tuvalu"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "Tanzania"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "Ucraína"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "Uganda"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Illas Exteriores Menores dos EEUU"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "Uruguai"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "Uzbekistán"

#: lang.pm:419
#, c-format
msgid "Vatican"
msgstr "O Vaticano"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "San Vincente e as Granadinas"

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "Venezuela"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr "Illas Virxes (Británicas)"

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Illas Virxes (Norteamericanas)"

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "Vietnam"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "Vanuatu"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis e Futuna"

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "Samoa"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "Iemen"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "Maiote"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "Zambia"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "Cimbabue"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "Benvid@ a %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr "O volume físico %s ainda se está usando"

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Quitar primeiro os volumes lóxicos\n"

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""

#: modules/interactive.pm:19
#, fuzzy, c-format
msgid "This driver has no configuration parameter!"
msgstr "Configuración do driver SAI"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Configuración dos módulos"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Aqui pode configurar cada parárametro dos módulos."

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Atopáronse %s interfaces"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "¿Ten algunha outra?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "¿Ten algunha interface %s?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Mire a información sobre o hardware"

#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "Instalando o driver para o controlador USB"

#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Instalando o driver para o controlador firewire %s"

#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Instalando o driver para o controlador de disco duro %s"

#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Instalando o driver para a controladora ethernet %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instalando o controlador para a tarxeta %s %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(módulo %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Aquí deben ir as diferentes opcións para o módulo %s.\n"
"As opcións son da forma «nome=valor nome2=valor2 ...».\n"
"Por exemplo pode ter «io=0x300 irq=7»"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "Opcións do módulo:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "¿Que controlador de %s desexa probar?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Nalgúns casos, o controlador de %s necesita información extra\n"
"para funcionar correctamente, aínda que normalmente funcione sen ela.\n"
"¿Desexa especificar información extra para o controlador ou deixar que el\n"
"analice o seu equipo e atope a información que necesita? Ás veces,\n"
"analizar o equipo pode provocar que se pare, pero non debería\n"
"causar ningún dano."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "Autodetección"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "Especifica-las opcións"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Fallo ó carga-lo módulo %s\n"
"¿Desexa volve-lo intentar con outros parámetros?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "un número"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d números separados por comas"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d cadeas de texto separadas por comas"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "números separados por comas"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "cadeas de texto separadas por comas"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Rato Sun"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Estándar"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Rato de Roda PS2 Xenérico"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
#: network/netconnect.pm:614 network/netconnect.pm:619
#: network/netconnect.pm:635 network/netconnect.pm:637
#, c-format
msgid "Automatic"
msgstr "Automático"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 botón"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Rato de 2 Botóns Xenérico"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Rato de 3 Botóns Xenérico con Emulación da Roda"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Roda"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "serie"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Rato de 3 Botóns Xenérico"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan con Emulación da Roda"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series con Emulación da Roda"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Rato Logitech (serie, antigo tipo C7)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Rato Logitech (serie, antigo tipo C7) con Emulación da Roda"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse con Emulación da Roda"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 botóns"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 botóns"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 botóns con emulación da roda"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Universal"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "Calquera rato PS/2 & USB"

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Explorer"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "ningún"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Ningún rato"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr "Touchpad Synaptic"

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "Probe o seu rato"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "Para activa-lo rato,"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "¡MOVA A RODA!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "Servidor Web"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Nome do Servidor do Dominio"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "Servidor SSH"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "Servidor FTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Servidor de Correo"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "Servidor POP e IMAP"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "Servidor Telnet"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "Compartimento de Ficheiros Windows (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "Servidor CUPS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "Solicitude de eco (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "BitTorrent"

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr "Detección de escaneo de portos"

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""
"Configurador de drakfirewall\n"
"\n"
"Isto configura un cortalumes persoal para esta máquina Mandriva Linux.\n"
"Para unha solución potente e dedicada a cortalumes, conte ca\n"
"distribución especializada Mandriva Security Firewall."

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"Configurador do drakfirewall\n"
"\n"
"Asegúrese de que xa configurou o seu acceso á Rede/Internet con\n"
"drakconnect antes de continuar."

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "¿A qué servicios desexa deixarlle conectarse á Internet?"

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Pode introducir diversos portos. \n"
"Exemplos válidos son: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Mire en /etc/services para obter información."

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Porto proporcionado incorrecto: %s.\n"
"O formato correcto é \"porto/tcp\" ou \"porto/udp\", \n"
"onde porto é un entre 1 e 65535.\n"
"\n"
"Tamén pode dar un rango de portos (p.ex: 24300:24350/udp)"

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr "Todos (sen cortalumes)"

#: network/drakfirewall.pm:209
#, c-format
msgid "Other ports"
msgstr "Outros portos"

#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:385 standalone/net_applet:422
#, c-format
msgid "Interactive Firewall"
msgstr "Cortalumes Interactivo"

#: network/drakfirewall.pm:252
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""

#: network/drakfirewall.pm:257
#, c-format
msgid "Use Interactive Firewall"
msgstr "Usar Cortalumes Interactivo"

#: network/ifw.pm:136
#, c-format
msgid "Port scanning"
msgstr "Escaneo de portos"

#: network/ifw.pm:137
#, c-format
msgid "Service attack"
msgstr "Ataque a servicios"

#: network/ifw.pm:138
#, c-format
msgid "Password cracking"
msgstr "Descifrado de contrasinais"

#: network/ifw.pm:139
#, c-format
msgid "\"%s\" attack"
msgstr "ataque \"%s\""

#: network/ifw.pm:141
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr "%s intentou un ataque de escaneo de portos."

#: network/ifw.pm:142
#, c-format
msgid "The %s service has been attacked by %s."
msgstr "O servicio %s foi atacado por %s."

#: network/ifw.pm:143
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr "%s intentou un ataque de descifrado de contrasinais."

#: network/ifw.pm:144
#, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr "Intentouse un ataque de \"%s\" por parte de %s"

#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
#: network/netconnect.pm:561 network/netconnect.pm:704
#: network/netconnect.pm:708
#, c-format
msgid "Unlisted - edit manually"
msgstr "Non está na lista - editar a man"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "I do not know"
msgstr "Non sei"

#: network/isdn.pm:161 network/netconnect.pm:396
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:396
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:602 network/netconnect.pm:619
#: network/netconnect.pm:635
#, c-format
msgid "Manual"
msgstr "Manual"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr "Non hai ningún dispositivo que soporte o driver ndiswrapper %s!"

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr "Seleccione o driver para Windows (ficheiro .inf)"

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr "Non foi posible instalar o driver ndiswrapper %s!"

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr "Non foi posible cargar o módulo ndiswrapper!"

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""
"O dispositivo seleccionado xa está configurado co driver %s.\n"
"Desexa usar un driver ndiswrapper?"

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr "Non foi posible atopar a interface ndiswrapper!"

#: network/netconnect.pm:69 network/netconnect.pm:494
#: network/netconnect.pm:506
#, c-format
msgid "Manual choice"
msgstr "Escolla manual"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "Tarxeta RDSI interna"

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "Configuración manual"

#: network/netconnect.pm:81 standalone/drakroam:121
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "IP automático (BOOTP/DHCP)"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "IP automático (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Protocolo para o resto do mundo"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Protocolo europeo (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protocolo para o resto do mundo\n"
"Sen canle-D (liñas dedicadas)"

#: network/netconnect.pm:103 standalone/harddrake2:329
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "descoñecido"

#: network/netconnect.pm:120 network/thirdparty.pm:219
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Módem USB Alcatel Speedtouch"

#: network/netconnect.pm:121
#, c-format
msgid "Sagem USB modem"
msgstr "Módem USB Sagem"

#: network/netconnect.pm:122
#, c-format
msgid "Bewan modem"
msgstr "Módem Bewan"

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "Módem ECI Hi-Focus"

#: network/netconnect.pm:127
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Dynamic Host Configuration Protocol (DHCP)"

#: network/netconnect.pm:128
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "Configuración manual de TCP/IP"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "Point to Point Tunneling Protocol (PPTP)"

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP over Ethernet (PPPoE)"

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP over ATM (PPPoA)"

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:136
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Tarxeta Ethernet"

#: network/netconnect.pm:137
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Tarxeta Ethernet"

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "Baseado nun script"

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "Baseado nun terminal"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:251 standalone/drakconnect:56
#, c-format
msgid "Network & Internet Configuration"
msgstr "Configuración da Rede e a Internet"

#: network/netconnect.pm:257
#, c-format
msgid "LAN connection"
msgstr "Conexión LAN"

#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, c-format
msgid "Wireless connection"
msgstr "Conexión Wireless"

#: network/netconnect.pm:259
#, c-format
msgid "ADSL connection"
msgstr "Conexión ADSL"

#: network/netconnect.pm:260
#, c-format
msgid "Cable connection"
msgstr "Conexión por cable"

#: network/netconnect.pm:261
#, c-format
msgid "ISDN connection"
msgstr "Conexión RDSI"

#: network/netconnect.pm:262
#, c-format
msgid "Modem connection"
msgstr "Conexión por módem"

#: network/netconnect.pm:263
#, c-format
msgid "DVB connection"
msgstr "Conexión DVB"

#: network/netconnect.pm:273
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Elixa a conexión que desexa configurar"

#: network/netconnect.pm:288 network/netconnect.pm:782
#, c-format
msgid "Connection Configuration"
msgstr "Configuración da Conexión"

#: network/netconnect.pm:288 network/netconnect.pm:783
#, c-format
msgid "Please fill or check the field below"
msgstr "Encha ou marque o campo de embaixo"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "O seu número de teléfono persoal"

#: network/netconnect.pm:292 network/netconnect.pm:786
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Nome do provedor (p.ex provider.net)"

#: network/netconnect.pm:293 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "Número de teléfono do provedor"

#: network/netconnect.pm:294
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr "DNS 1 do provedor (opcional)"

#: network/netconnect.pm:295
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr "DNS 2 do provedor (opcional)"

#: network/netconnect.pm:296 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "Modo de marcación"

#: network/netconnect.pm:297 standalone/drakconnect:449
#: standalone/drakconnect:517
#, c-format
msgid "Connection speed"
msgstr "Velocidade da conexión"

#: network/netconnect.pm:298 standalone/drakconnect:454
#, fuzzy, c-format
msgid "Connection timeout (in sec)"
msgstr "Tipo de conexión: "

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:789 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "Login da conta (nome de usuario)"

#: network/netconnect.pm:300 network/netconnect.pm:325
#: network/netconnect.pm:790 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "Contrasinal da conta"

#: network/netconnect.pm:301 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "IRQ da tarxeta"

#: network/netconnect.pm:302 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "Memoria da tarxeta (DMA)"

#: network/netconnect.pm:303 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "E/S da tarxeta"

#: network/netconnect.pm:304 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "E/S_0 da tarxeta"

#: network/netconnect.pm:305
#, c-format
msgid "Card IO_1"
msgstr "E/S_1 da tarxeta"

#: network/netconnect.pm:320
#, c-format
msgid "Cable: account options"
msgstr "Cable: opcións da conta"

#: network/netconnect.pm:323
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr "Usar BPALogin (necesario para Telstra)"

#: network/netconnect.pm:349 network/netconnect.pm:671
#: network/netconnect.pm:822 network/netconnect.pm:1167
#, c-format
msgid "Select the network interface to configure:"
msgstr "Seleccione a interface de rede a configurar:"

#: network/netconnect.pm:351 network/netconnect.pm:386
#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
#: standalone/drakconnect:713
#, c-format
msgid "Net Device"
msgstr "Dispositivo de Rede"

#: network/netconnect.pm:352 network/netconnect.pm:357
#, c-format
msgid "External ISDN modem"
msgstr "Módem RDSI externo"

#: network/netconnect.pm:385 standalone/harddrake2:216
#, c-format
msgid "Select a device!"
msgstr "¡Seleccione un dispositivo!"

#: network/netconnect.pm:394 network/netconnect.pm:404
#: network/netconnect.pm:414 network/netconnect.pm:447
#: network/netconnect.pm:461
#, c-format
msgid "ISDN Configuration"
msgstr "Configuración da RDSI"

#: network/netconnect.pm:395
#, c-format
msgid "What kind of card do you have?"
msgstr "¿Qué tipo de tarxeta ten?"

#: network/netconnect.pm:405
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Se ten unha tarxeta ISA, os valores da seguinte pantalla deberían ser os "
"correctos.\n"
"\n"
"Se ten unha tarxeta PCMCIA, ten que coñecer a \"irq\" e a \"e/s\" da "
"tarxeta.\n"

#: network/netconnect.pm:409
#, c-format
msgid "Continue"
msgstr "Continuar"

#: network/netconnect.pm:409
#, c-format
msgid "Abort"
msgstr "Abortar"

#: network/netconnect.pm:415
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "¿Cal das seguintes é a sua tarxeta RDSI?"

#: network/netconnect.pm:433
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""
"Hai un driver CAPI dispoñible para este módem. Este driver CAPI pode ofrecer "
"máis capacidades có driver libre (p.ex. enviar faxes). Que driver desexa "
"usar?"

#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Controlador"

#: network/netconnect.pm:447
#, c-format
msgid "Which protocol do you want to use?"
msgstr "¿Qué protocolo desexa usar?"

#: network/netconnect.pm:449 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Protocolo"

#: network/netconnect.pm:461
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"Seleccione o seu provedor.\n"
"Se non está na lista, escolla 'Unlisted'"

#: network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:703
#, c-format
msgid "Provider:"
msgstr "Provedor:"

#: network/netconnect.pm:472
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"O seu módem non está soportado polo sistema.\n"
"Mire en http://www.linmodems.org"

#: network/netconnect.pm:491
#, c-format
msgid "Select the modem to configure:"
msgstr "Escolla o módem que desexa configurar:"

#: network/netconnect.pm:526
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Escolla o porto serie onde está conectado o seu módem."

#: network/netconnect.pm:555
#, c-format
msgid "Select your provider:"
msgstr "Seleccione o seu provedor:"

#: network/netconnect.pm:579
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Opcións de chamada"

#: network/netconnect.pm:582
#, c-format
msgid "Connection name"
msgstr "Nome da conexión"

#: network/netconnect.pm:583
#, c-format
msgid "Phone number"
msgstr "Número de teléfono"

#: network/netconnect.pm:584
#, c-format
msgid "Login ID"
msgstr "ID do login"

#: network/netconnect.pm:599 network/netconnect.pm:632
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Parámetros"

#: network/netconnect.pm:602
#, c-format
msgid "IP parameters"
msgstr "Parámetros do IP"

#: network/netconnect.pm:603 network/netconnect.pm:938
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "Enderezo IP"

#: network/netconnect.pm:604
#, c-format
msgid "Subnet mask"
msgstr "Máscara de subrede"

#: network/netconnect.pm:616
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:619
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:620
#, c-format
msgid "Domain name"
msgstr "Nome de dominio"

#: network/netconnect.pm:621 network/netconnect.pm:787
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr "Primeiro Servidor DNS (opcional)"

#: network/netconnect.pm:622 network/netconnect.pm:788
#: standalone/drakconnect:993
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Segundo Servidor DNS (opcional)"

#: network/netconnect.pm:623
#, c-format
msgid "Set hostname from IP"
msgstr "Asignar nome de máquina dende IP"

#: network/netconnect.pm:635 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "Pasarela"

#: network/netconnect.pm:636 standalone/drakroam:124
#, c-format
msgid "Gateway IP address"
msgstr "Enderezo IP da pasarela"

#: network/netconnect.pm:671
#, c-format
msgid "ADSL configuration"
msgstr "Configuración da ADSL"

#: network/netconnect.pm:701
#, c-format
msgid "Please choose your ADSL provider"
msgstr "Escolla o seu provedor de ADSL"

#: network/netconnect.pm:731
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""
"Elixa o tipo de conexión ADSL que ten.\n"
"Se non o sabe, deixe o tipo preseleccionado."

#: network/netconnect.pm:734
#, c-format
msgid "ADSL connection type:"
msgstr "Tipo de conexión ADSL: "

#: network/netconnect.pm:792
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:793
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:796
#, c-format
msgid "Encapsulation:"
msgstr "Encapsulación:"

#: network/netconnect.pm:826
#, c-format
msgid "Manually load a driver"
msgstr "Cargar un driver manualmente"

#: network/netconnect.pm:827
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr "Usar un driver para Windows (con ndiswrapper)"

#: network/netconnect.pm:893
#, c-format
msgid "Zeroconf hostname resolution"
msgstr "Resolución de nome de máquina Zeroconf"

#: network/netconnect.pm:894 network/netconnect.pm:925
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Configurando o dispositivo de rede %s (driver %s)"

#: network/netconnect.pm:895
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""
"Poden usarse os seguintes protocolos para configurar unha conexión LAN. "
"Escolla o que desexa usar"

#: network/netconnect.pm:926
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Introduza a configuración do IP desta máquina, por favor.\n"
"Cada valor ten que ser introducido coma un enderezo IP en\n"
"notación decimal con puntos (por exemplo, 1.2.3.4)."

#: network/netconnect.pm:933 standalone/drakconnect:373
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Asignar o nome de máquina dende o enderezo DHCP"

#: network/netconnect.pm:934 standalone/drakconnect:375
#, c-format
msgid "DHCP host name"
msgstr "Nome de máquina DHCP"

#: network/netconnect.pm:939 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "Máscara de rede"

#: network/netconnect.pm:941 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:942 standalone/drakconnect:438
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "Configuración da rede"

#: network/netconnect.pm:944 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr "Iniciar ó arrincar"

#: network/netconnect.pm:946 standalone/drakconnect:460
#, fuzzy, c-format
msgid "Metric"
msgstr "restrinxir"

#: network/netconnect.pm:947
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr "Habilitar o túnel IPv6 a IPv4"

#: network/netconnect.pm:949 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr "Cliente DHCP"

#: network/netconnect.pm:951 standalone/drakconnect:379
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "Tipo de conexión: "

#: network/netconnect.pm:952 standalone/drakconnect:382
#, c-format
msgid "Get DNS servers from DHCP"
msgstr "Conseguir servidores DNS dende DHCP"

#: network/netconnect.pm:953 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr "Conseguir servidores YP dende DHCP"

#: network/netconnect.pm:954 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr "Conseguir servidores NTPD dende DHCP"

#: network/netconnect.pm:962 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "Os enderezos IP deben estar no formato 1.2.3.4"

#: network/netconnect.pm:966 standalone/drakconnect:680
#, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "A máscara de rede debe ter o formato 255.255.224.0"

#: network/netconnect.pm:970
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr "ADVERTENCIA: ¡O enderezo IP %s normalmente está reservado!"

#: network/netconnect.pm:975 standalone/drakTermServ:1856
#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
#, c-format
msgid "%s already in use\n"
msgstr "%s xa se está usando\n"

#: network/netconnect.pm:1015
#, c-format
msgid "Choose an ndiswrapper driver"
msgstr "Escolla un driver ndiswrapper"

#: network/netconnect.pm:1017
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr "Usar o driver ndiswrapper %s"

#: network/netconnect.pm:1017
#, c-format
msgid "Install a new driver"
msgstr "Instalar un novo driver"

#: network/netconnect.pm:1029
#, c-format
msgid "Select a device:"
msgstr "Seleccione un dispositivo:"

#: network/netconnect.pm:1058
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Introduza os parámetros wireless para esta tarxeta:"

#: network/netconnect.pm:1061 standalone/drakconnect:404
#: standalone/drakroam:52
#, c-format
msgid "Operating Mode"
msgstr "Modo Operativo"

#: network/netconnect.pm:1062
#, c-format
msgid "Ad-hoc"
msgstr "Ad-hoc"

#: network/netconnect.pm:1062
#, fuzzy, c-format
msgid "Managed"
msgstr "Escoller a lingua"

#: network/netconnect.pm:1062
#, c-format
msgid "Master"
msgstr "Master"

#: network/netconnect.pm:1062
#, fuzzy, c-format
msgid "Repeater"
msgstr "Restaurar"

#: network/netconnect.pm:1062
#, c-format
msgid "Secondary"
msgstr "Secundario"

#: network/netconnect.pm:1062
#, c-format
msgid "Auto"
msgstr "Auto"

#: network/netconnect.pm:1065 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr "Nome de rede (ESSID)"

#: network/netconnect.pm:1066 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr "Modo de cifrado"

#: network/netconnect.pm:1071
#, c-format
msgid "Allow access point roaming"
msgstr ""

#: network/netconnect.pm:1073 standalone/drakconnect:406
#, c-format
msgid "Network ID"
msgstr "ID da rede"

#: network/netconnect.pm:1074 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr "Frecuencia operativa"

#: network/netconnect.pm:1075 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1076 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:1077 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:1078
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1085 standalone/drakconnect:421
#, c-format
msgid "Fragmentation"
msgstr "Fragmentación"

#: network/netconnect.pm:1086 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr "Argumentos extra do comando iwconfig"

#: network/netconnect.pm:1087
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""
"Aquí, vostede pode configurar algúns parámetros wireless extra coma:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (coma nick tómase o "
"nome de máquina).\n"
"\n"
"Mire a páxina do manual de iwconfig(8) para obter información adicional."

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1094 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr "Argumentos extra do comando iwspy"

#: network/netconnect.pm:1095
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1104 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr "Argumentos extra do comando iwpriv"

#: network/netconnect.pm:1105
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1120
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1124
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1167
#, c-format
msgid "DVB configuration"
msgstr "Configuración de DVB"

#: network/netconnect.pm:1168
#, c-format
msgid "DVB Adapter"
msgstr "Adaptador DVB"

#: network/netconnect.pm:1185
#, c-format
msgid "DVB adapter settings"
msgstr "Opcións do adaptador DVB"

#: network/netconnect.pm:1188
#, c-format
msgid "Adapter card"
msgstr "Tarxeta adaptadora"

#: network/netconnect.pm:1189
#, c-format
msgid "Net demux"
msgstr ""

#: network/netconnect.pm:1190
#, c-format
msgid "PID"
msgstr "PID"

#: network/netconnect.pm:1218
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Introduza o nome da súa máquina.\n"
"Ese nome debe ser un nome completamente cualificado,\n"
"como ``amiñamaquina.omeulab.amiñacomp.com''.\n"
"Tamén pode introducir o enderezo IP da pasarela se usa unha."

#: network/netconnect.pm:1223
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr "Por último tamén pode introducir os enderezos IP do seu servidor DNS."

#: network/netconnect.pm:1225 standalone/drakconnect:991
#, c-format
msgid "Host name (optional)"
msgstr "Nome da máquina (opcional)"

#: network/netconnect.pm:1225 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "Nome de máquina"

#: network/netconnect.pm:1227
#, c-format
msgid "DNS server 1"
msgstr "Servidor DNS 1"

#: network/netconnect.pm:1228
#, c-format
msgid "DNS server 2"
msgstr "Servidor DNS 2"

#: network/netconnect.pm:1229
#, c-format
msgid "DNS server 3"
msgstr "Servidor DNS 3"

#: network/netconnect.pm:1230
#, c-format
msgid "Search domain"
msgstr "Buscar dominio"

#: network/netconnect.pm:1231
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1232
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Pasarela (p.ex. %s)"

#: network/netconnect.pm:1234
#, c-format
msgid "Gateway device"
msgstr "Dispositivo de pasarela"

#: network/netconnect.pm:1243
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "O enderezo do servidor DNS debe estar no formato 1.2.3.4"

#: network/netconnect.pm:1248 standalone/drakconnect:685
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "O enderezo da pasarela debe estar no formato 1.2.3.4"

#: network/netconnect.pm:1261
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1265
#, c-format
msgid "Zeroconf Host name"
msgstr "Nome de máquina Zeroconf"

#: network/netconnect.pm:1268
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "O nome de máquina Zeroconf non debe conter un ."

#: network/netconnect.pm:1278
#, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "Desexa permitir que os usuarios inicien a conexión?"

#: network/netconnect.pm:1291
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "¿Desexa que a conexión se inicie ó arrincar?"

#: network/netconnect.pm:1307
#, c-format
msgid "Automatically at boot"
msgstr "Automáticamente ó arrincar"

#: network/netconnect.pm:1309
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1311
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1320
#, fuzzy, c-format
msgid "How do you want to dial this connection?"
msgstr "¿Desexa que a conexión se inicie ó arrincar?"

#: network/netconnect.pm:1333
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "¿Quere probar agora a conexión á Internet?"

#: network/netconnect.pm:1341 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr "Probando a conexión..."

#: network/netconnect.pm:1366
#, c-format
msgid "The system is now connected to the Internet."
msgstr "O sistema está conectado á Internet."

#: network/netconnect.pm:1367
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Por razóns de seguridade, desconectarase agora."

#: network/netconnect.pm:1368
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Semella que o sistema non está conectado á internet.\n"
"Probe volvendo a configura-la conexión."

#: network/netconnect.pm:1383
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Noraboa. A configuración da rede e da Internet está rematada.\n"
"\n"

#: network/netconnect.pm:1386
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Tras facer iso, aconséllase reiniciar o sistema X para\n"
"evita-los problemas de mudar o nome de máquina."

#: network/netconnect.pm:1387
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1398
#, c-format
msgid "(detected on port %s)"
msgstr "(detectado no porto %s)"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1400
#, c-format
msgid "(detected %s)"
msgstr "(detectouse %s)"

#: network/netconnect.pm:1400
#, c-format
msgid "(detected)"
msgstr "(detectouse)"

#: network/netconnect.pm:1401
#, c-format
msgid "Network Configuration"
msgstr "Configuración da Rede"

#: network/netconnect.pm:1402
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Como está a facer unha instalación dende a rede, esta xa está configurada.\n"
"Prema Aceptar para mante-la configuración, ou Cancelar para reconfigura-la "
"conexión de rede e Internet.\n"

#: network/netconnect.pm:1405
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "Cómpre reinicia-la rede. ¿Desexa reiniciala?"

#: network/netconnect.pm:1406
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Ocurriu un problema mentres se reiniciaba a rede: \n"
"\n"
"%s"

#: network/netconnect.pm:1407
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"Imos configura-la conexión %s.\n"
"\n"
"\n"
"Prema \"%s\" para continuar."

#: network/netconnect.pm:1408
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "A configuración está completa, ¿desexa aplica-la configuración?"

#: network/netconnect.pm:1409
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Configurou varios xeitos para conectar á Internet.\n"
"Escolla o que desexa usar.\n"
"\n"

#: network/netconnect.pm:1410
#, c-format
msgid "Internet connection"
msgstr "Conexión da Internet"

#: network/netconnect.pm:1427
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""
"Ocorreu un erro inesperado:\n"
"%s"

#: network/network.pm:408
#, c-format
msgid "Proxies configuration"
msgstr "Configuración dos proxys"

#: network/network.pm:409
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080"
msgstr ""

#: network/network.pm:410
#, c-format
msgid "HTTP proxy"
msgstr "Proxy HTTP"

#: network/network.pm:411
#, c-format
msgid "FTP proxy"
msgstr "Proxy FTP"

#: network/network.pm:414
#, c-format
msgid "Proxy should be http://..."
msgstr "O proxy debería ser http://..."

#: network/network.pm:415
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "O URL debería comezar con 'ftp:' ou 'http:'"

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Introduza o nome da interface conectada á Internet.\n"
"\n"
"Exemplos:\n"
"\t\tppp+ para módems ou conexións DSL, \n"
"\t\teth0, ou eth1 para conexión por cable, \n"
"\t\tippp+ para unha conexión RDSI.\n"

#: network/thirdparty.pm:231
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""

#: network/thirdparty.pm:240
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""
"O módem ECI Hi-Focus non pode soportarse debido a problemas de distribución "
"dos drivers binarios.\n"
"\n"
"Pode atopar un driver en http://eciadsl.flashtux.org/"

#: network/thirdparty.pm:319
#, c-format
msgid "Could not install the packages (%s)!"
msgstr "Non se puido instala-los paquetes (%s)!"

#: network/thirdparty.pm:327
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr "Requírense algúns paquetes (%s) pero non están dispoñibles."

#: network/thirdparty.pm:328
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""
"Estes paquetes pódense atopar en Mandriva Club ou nas versións comerciais de "
"Mandriva."

#: network/thirdparty.pm:330
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""
"Os ficheiros requiridos tamén se poden instalar dende este URL:\n"
"%s"

#: network/thirdparty.pm:370
#, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "Non foi posible atopar \"%s\" no seu sistema Windows!"

#: network/thirdparty.pm:372
#, c-format
msgid "No Windows system has been detected!"
msgstr "Non se detectou ningún sistema Windows!"

#: network/thirdparty.pm:382
#, c-format
msgid "Insert floppy"
msgstr "Insira un disquete"

#: network/thirdparty.pm:383
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Insira un disquete formatado con FAT na unidade %s con %s no directorio raíz "
"e prema %s"

#: network/thirdparty.pm:393
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Erro de acceso ó disquete, non se puido monta-lo dispositivo %s"

#: network/thirdparty.pm:403
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/thirdparty.pm:407 network/thirdparty.pm:409
#, c-format
msgid "Use a floppy"
msgstr "Usar un disquete"

#: network/thirdparty.pm:407
#, c-format
msgid "Use my Windows partition"
msgstr "Usa-la partición de Windows"

#: network/thirdparty.pm:417
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr "Fallo ó copia-lo firmware, non se atopou o ficheiro %s"

#: network/thirdparty.pm:422 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "¡Noraboa!"

#: network/thirdparty.pm:422
#, c-format
msgid "Firmware copy succeeded"
msgstr "Copia do firmware levouse a cabo con éxito"

#: network/thirdparty.pm:490
#, c-format
msgid "Looking for required software and drivers..."
msgstr "Buscando o software e os drivers requiridos..."

#: network/thirdparty.pm:495
#, c-format
msgid "Please wait, running device configuration commands..."
msgstr "Agarde, executando os comandos de configuración do dispositivo..."

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr "WEP aberto"

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr "WEP restrinxido"

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "mount fallou: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "As particións estendidas non están soportadas nesta plataforma"

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Ten un burato na táboa de particións, pero non se pode usar.\n"
"A única solución é despraza-las particións primarias para que\n"
"o burato estea despois das particións estendidas."

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Fallou a restauración a partir do ficheiro %s: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "Ficheiro de copia de seguridade incorrecto"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "Erro escribindo ó ficheiro %s"

#: partition_table/raw.pm:253
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Está acontecendo algo grave na súa unidade.\n"
"A proba para verifica-la integridade dos datos fallou.\n"
"Isto significa que calquera escritura no disco terminará en datos corruptos "
"aleatorios."

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "debe telo"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "importante"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "moi bo"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "bo"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "indiferente"

#: pkgs.pm:473
#, c-format
msgid "Downloading file %s..."
msgstr "Descargando o ficheiro %s..."

#: printer/cups.pm:105
#, c-format
msgid "(on %s)"
msgstr "(en %s)"

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr "(nesta máquina)"

#: printer/cups.pm:117 standalone/printerdrake:200
#, c-format
msgid "Configured on other machines"
msgstr "Configurado noutras máquinas"

#: printer/cups.pm:119
#, c-format
msgid "On CUPS server \"%s\""
msgstr "No servidor CUPS \"%s\""

#: printer/cups.pm:119 printer/printerdrake.pm:4887
#: printer/printerdrake.pm:4897 printer/printerdrake.pm:5056
#: printer/printerdrake.pm:5067 printer/printerdrake.pm:5281
#, c-format
msgid " (Default)"
msgstr " (Por omisión)"

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:158
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Common Unix Printing System (servidor remoto)"

#: printer/data.pm:159
#, c-format
msgid "Remote CUPS"
msgstr "CUPS remoto"

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:690
#: printer/main.pm:1808 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
#: printer/printerdrake.pm:3981
#, c-format
msgid "Unknown model"
msgstr "Modelo descoñecido"

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr "Impresora local"

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "Impresora remota"

#: printer/main.pm:26
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Impresora nun servidor CUPS remoto"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, c-format
msgid "Printer on remote lpd server"
msgstr "Impresora nun servidor lpd remoto"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Impresora de rede (TCP/Socket)"

#: printer/main.pm:29
#, c-format
msgid "Printer on SMB/Windows server"
msgstr "Impresora no servidor SMB/Windows"

#: printer/main.pm:30
#, c-format
msgid "Printer on NetWare server"
msgstr "Impresora nun servidor NetWare"

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, c-format
msgid "Enter a printer device URI"
msgstr "Introduza o URI dun dispositivo de impresión"

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr ""

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr "recomendado"

#: printer/main.pm:355 standalone/printerdrake:199
#, c-format
msgid "Configured on this machine"
msgstr "Configurado nesta máquina"

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr " nun porto paralelo #%s"

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, c-format
msgid ", USB printer #%s"
msgstr ", impresora USB #%s"

#: printer/main.pm:366
#, c-format
msgid ", USB printer"
msgstr ", impresora USB"

#: printer/main.pm:370
#, c-format
msgid ", HP printer on a parallel port"
msgstr ", impresora HP nun porto paralelo"

#: printer/main.pm:372
#, c-format
msgid ", HP printer on USB"
msgstr ", impresora HP nun USB"

#: printer/main.pm:374
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ", impresora HP en HP JetDirect"

#: printer/main.pm:376
#, c-format
msgid ", HP printer"
msgstr ", impresora HP"

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", dispositivo multifunción no porto paralelo #%s"

#: printer/main.pm:385
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", dispositivo multifunción nun porto paralelo"

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ", dispositivo multifunción por USB"

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", dispositivo multifunción en HP JetDirect"

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ", dispositivo multifunción"

#: printer/main.pm:395
#, c-format
msgid ", printing to %s"
msgstr ", imprimindo en %s"

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " no servidor LPD \"%s\", impresora \"%s\""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", máquina TCP/IP \"%s\", porto %s"

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr " nun servidor SMB/Windows \"%s\", recurso \"%s\""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " nun servidor Novell \"%s\", impresora \"%s\""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ", usando o comando %s"

#: printer/main.pm:429
#, c-format
msgid "Parallel port #%s"
msgstr "Porto paralelo #%s"

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, c-format
msgid "USB printer #%s"
msgstr "Impresora USB #%s"

#: printer/main.pm:434
#, c-format
msgid "USB printer"
msgstr "Impresora USB"

#: printer/main.pm:438
#, c-format
msgid "HP printer on a parallel port"
msgstr "Impresora HP nun porto paralelo"

#: printer/main.pm:440
#, c-format
msgid "HP printer on USB"
msgstr "Impresora HP nun USB"

#: printer/main.pm:442
#, c-format
msgid "HP printer on HP JetDirect"
msgstr "Impresora HP en HP JetDirect"

#: printer/main.pm:444
#, c-format
msgid "HP printer"
msgstr "Impresora HP"

#: printer/main.pm:450
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "Dispositivo multifunción no porto paralelo #%s"

#: printer/main.pm:453
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "Dispositivo multifunción nun porto paralelo"

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr "Dispositivo multifunción por USB"

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "Dispositivo multifunción en HP JetDirect"

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr "Dispositivo multifunción"

#: printer/main.pm:463
#, c-format
msgid "Prints into %s"
msgstr "Imprime en %s"

#: printer/main.pm:466
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "Servidor LPD \"%s\", impresora \"%s\""

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "Máquina TCP/IP \"%s\", porto %s"

#: printer/main.pm:474
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "Servidor SMB/Windows \"%s\", recurso \"%s\""

#: printer/main.pm:479
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "Servidor Novell \"%s\", impresora \"%s\""

#: printer/main.pm:482
#, c-format
msgid "Uses command %s"
msgstr "Usa o comando %s"

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:687 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3119
#, c-format
msgid "Raw printer (No driver)"
msgstr "Impresora Raw (Sen driver)"

#: printer/main.pm:1307 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, c-format
msgid "Local network(s)"
msgstr "Rede(s) locais"

#: printer/main.pm:1309 printer/printerdrake.pm:227
#, c-format
msgid "Interface \"%s\""
msgstr "Interface \"%s\""

#: printer/main.pm:1311
#, c-format
msgid "Network %s"
msgstr "Rede %s"

#: printer/main.pm:1313
#, c-format
msgid "Host %s"
msgstr "Máquina %s"

#: printer/main.pm:1342
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Porto %s)"

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:67
#, c-format
msgid "CUPS printer configuration"
msgstr "Configuración de impresora CUPS"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Aqui pode escoller qué impresoras das conectadas a esta máquina debe ser "
"accesible a máquinas remotas e a cales máquinas."

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Tamén pode decidir aqui cales das impresoras das máquinas remotas estarán "
"dispoñibles dende esta máquina."

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "As impresoras desta máquina poden usarse dende outros ordenadores."

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Buscar automáticamente as impresoras dispoñibles das máquina remotas"

#: printer/printerdrake.pm:82
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Compartimento de Impresoras en máquinas/redes:"

#: printer/printerdrake.pm:84
#, c-format
msgid "Custom configuration"
msgstr "Configuración personalizada"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, c-format
msgid "No remote machines"
msgstr "Non hai máquinas remotas"

#: printer/printerdrake.pm:100
#, c-format
msgid "Additional CUPS servers: "
msgstr "Servidores CUPS adicionais: "

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:115
#, c-format
msgid "Japanese text printing mode"
msgstr "Modo de impresión de texto en Xaponés"

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:123
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Correción automática da configuración de CUPS"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4520
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr "Servidor CUPS remoto e sen daemon CUPS local"

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "Acendida"

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "Apagada"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""
"Neste modo o daemon CUPS local pararase e tódalas solicitudes de impresión "
"irán directamente ó servidor especificado embaixo. Teña en conta que non é "
"posible definir colas de impresión locais despois e se o servidor "
"especificado está caído non se poderá imprimir dende esta máquina."

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, c-format
msgid "Sharing of local printers"
msgstr "Compartimento de impresoras locais"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Estas son as máquinas e as redes nas que as impresoras conectadas localmente "
"deberían estar dispoñibles:"

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr "Engadir máquina/rede"

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr "Editar a máquina/rede seleccionada"

#: printer/printerdrake.pm:188
#, c-format
msgid "Remove selected host/network"
msgstr "Eliminar a máquina/rede seleccionada"

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr "Enderezo IP da máquina/rede:"

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""
"Escolla a rede ou máquina na que as impresoras conectadas localmente deben "
"estar dispoñibles:"

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "O IP da máquina/rede que introduciu non é correcto.\n"

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Exemplos de IPs correctos:\n"

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Esta máquina/rede xa está na lista, e non se pode engadir outra vez.\n"

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Accedendo a impresoras en servidores CUPS remotos"

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Engada aquí os servidores CUPS dos que desexa usar as súas impresoras. Só "
"cómpre facer isto se os servidores non difunden (broadcast) a información "
"das súas impresoras pola rede local."

#: printer/printerdrake.pm:358
#, c-format
msgid "Add server"
msgstr "Engadir servidor"

#: printer/printerdrake.pm:364
#, c-format
msgid "Edit selected server"
msgstr "Edita-lo servidor seleccionado"

#: printer/printerdrake.pm:373
#, c-format
msgid "Remove selected server"
msgstr "Elimina-lo servidor seleccionado"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
"Introduza o enderezo IP e o porto da máquina conectada ás impresoras que "
"quere usar."

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "Se non se especifica un porto, tomarase o 631 coma predeterminado."

#: printer/printerdrake.pm:422
#, fuzzy, c-format
msgid "Server IP missing!"
msgstr "Servidor de impresión"

#: printer/printerdrake.pm:428
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "O enderezo IP que introduciu non é correcto.\n"

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr "¡O número do porto debe ser un número enteiro!"

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Este servidor xa está na lista, non pode engadilo de novo.\n"

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Porto"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, fuzzy, c-format
msgid "On, Name or IP of remote server:"
msgstr "Impresora nun servidor lpd remoto"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4529
#: printer/printerdrake.pm:4595
#, fuzzy, c-format
msgid "CUPS server name or IP address missing."
msgstr "Servidor de impresión"

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
#: printer/printerdrake.pm:4320 printer/printerdrake.pm:4415
#: printer/printerdrake.pm:4421 printer/printerdrake.pm:4449
#: printer/printerdrake.pm:4556 printer/printerdrake.pm:4665
#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4694
#: printer/printerdrake.pm:4709 printer/printerdrake.pm:4910
#: printer/printerdrake.pm:5385 printer/printerdrake.pm:5468
#: standalone/printerdrake:75 standalone/printerdrake:590
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
#: printer/printerdrake.pm:4666
#, c-format
msgid "Reading printer data..."
msgstr "Lendo os datos da impresora..."

#: printer/printerdrake.pm:587
#, c-format
msgid "Restarting CUPS..."
msgstr "Reiniciando CUPS..."

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""

#: printer/printerdrake.pm:622
#, c-format
msgid "Printer auto administration"
msgstr "Administración automática de impresoras"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""
"Aquí pode configurar as tarefas de administración de impresoras que deben "
"facerse automáticamente."

#: printer/printerdrake.pm:626
#, c-format
msgid "Do automatic configuration of new printers"
msgstr "Usar configuración automática nas novas impresoras"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, c-format
msgid "when a USB printer is connected and turned on"
msgstr "cando se conecta e se prende unha impresora USB"

#: printer/printerdrake.pm:630
#, c-format
msgid "when Printerdrake is started"
msgstr "cando se iniciou Printerdrake"

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr ""

#: printer/printerdrake.pm:640
#, c-format
msgid "Re-enable disabled printers"
msgstr "Volver habilitar as impresoras deshabilitadas"

#: printer/printerdrake.pm:644
#, c-format
msgid "when the printing system is started"
msgstr "cando se iniciou o sistema de impresión"

#: printer/printerdrake.pm:680
#, fuzzy, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr "Usando/Mantendo a impresora \"%s\""

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""
"Aquí pode configurar como se deben manexar os erros durante a comunicación "
"entre o seu ordenador e a impresora \"%s\" (por exemplo se a impresora non "
"está acesa)."

#: printer/printerdrake.pm:686
#, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr "O número de reintentos debe ser un número enteiro ou polo menos 1!"

#: printer/printerdrake.pm:690
#, fuzzy, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr "¡A opción %s debe ser un número enteiro!"

#: printer/printerdrake.pm:701
#, c-format
msgid "Do not disable the printer"
msgstr "Non deshabilitar a impresora"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr ""

#: printer/printerdrake.pm:707
#, c-format
msgid "Number of retries"
msgstr "Número de reintentos"

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr "Atraso entre reintentos (en segundos)"

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr "Selección da Conexión da Impresora"

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr "¿Como está conectada a impresora?"

#: printer/printerdrake.pm:748
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Cun servidor CUPS remoto, non terá que configurar aquíningunha impresora, xa "
"que serán detectadas automaticamente."

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4912
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""
"\n"
"ADVERTENCIA: Non hai ningunha conexión á rede local activa, as impresoras "
"remotas non poderán ser detectadas ou probadas!"

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""
"Detección automática de impresoras (Locais, TCP/Socket, impresoras SMB, e "
"URI do dispositivo)"

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:772
#, fuzzy, c-format
msgid "The timeout must be a positive integer number!"
msgstr "¡A opción %s debe ser un número enteiro!"

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr "Comprobando o sistema..."

#: printer/printerdrake.pm:829
#, c-format
msgid "and one unknown printer"
msgstr "e unha impresora descoñecida"

#: printer/printerdrake.pm:831
#, c-format
msgid "and %d unknown printers"
msgstr "e %d impresoras descoñecidas"

#: printer/printerdrake.pm:835
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"As seguintes impresoras\n"
"\n"
"%s%s\n"
"están conectadas directamente ó sistema"

#: printer/printerdrake.pm:837
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"A seguinte impresora\n"
"\n"
"%s%s\n"
"está conectada directamente ó sistema"

#: printer/printerdrake.pm:838
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"A seguinte impresora\n"
"\n"
"%s%s\n"
"está conectada directamente ó sistema"

#: printer/printerdrake.pm:842
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"Hai unha impresora descoñecida conectada directamente ó sistema"

#: printer/printerdrake.pm:843
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"Hai %d impresoras descoñecidas conectadas directamente ó sistema"

#: printer/printerdrake.pm:846
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""
"Non se atopou ningunha impresora que estea conectada directamente á máquina"

#: printer/printerdrake.pm:849
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Asegúrese de que tódalas impresoras están conectadas e prendidas).\n"

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Desexa habilitar a impresión nas impresoras mencionadas enriba ou nas "
"impresoras da rede local?\n"

#: printer/printerdrake.pm:863
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Desexa habilitar a impresión en impresoras da rede local?\n"

#: printer/printerdrake.pm:865
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Desexa habilitar a impresión nas impresoras mencionadas enriba?\n"

#: printer/printerdrake.pm:866
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Está seguro de que desexa configurar a impresión nesta máquina?\n"

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"NOTA: Dependendo do modelo da impresora e do sistema de impresión "
"instalaranse ata %d MB de software adicional."

#: printer/printerdrake.pm:884
#, c-format
msgid "Do not setup printer automatically now, and never do it again"
msgstr "Non configurar automáticamente a impresora agora, nin nunca"

#: printer/printerdrake.pm:928
#, c-format
msgid "Searching for new printers..."
msgstr "Buscando novas impresoras..."

#: printer/printerdrake.pm:976
#, c-format
msgid "Do not setup printer automatically again"
msgstr "Non volver configurar a impresora automáticamente"

#: printer/printerdrake.pm:983
#, c-format
msgid "New printers found"
msgstr "Atopáronse novas impresoras"

#: printer/printerdrake.pm:984
#, c-format
msgid "New printer found"
msgstr "Atopouse unha nova impresora"

#: printer/printerdrake.pm:986
#, c-format
msgid ""
"The following new printers were found and Printerdrake can automatically set "
"them up for you. If you do not want to have all of them set up, unselect the "
"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
msgstr ""
"Atopáronse as seguintes impresoras novas e Printerdrake pode configuralas "
"automáticamente. Se non desexa configuralas todas, deseleccione as que "
"deben  saltarse, ou clique en \"Cancelar\" para non configurar ningunha.\n"

#: printer/printerdrake.pm:987
#, c-format
msgid ""
"The following new printer was found and printerdrake can automatically set "
"it up for you. If you do not want to have it set up, unselect it, or click "
"\"Cancel\".\n"
msgstr ""
"Atopouse a seguinte impresora nova e Printerdrake pode configurala "
"automáticamente. Se non desexa configurala, deselecciónea, ou clique en "
"\"Cancelar\".\n"

#: printer/printerdrake.pm:988
#, c-format
msgid ""
"Note that for certain printer models additional packages need to be "
"installed. So keep your installation media handy.\n"
msgstr ""
"Teña en conta que cómpre instalar paquetes adicionais para certos modelos de "
"impresoras. Así que teña a man o soporte de instalación.\n"

#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
#, c-format
msgid "Configuring printer on %s..."
msgstr "Configurando impresora en %s..."

#: printer/printerdrake.pm:1049
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:1050
#, c-format
msgid " on "
msgstr " en "

#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
#, c-format
msgid "Printer model selection"
msgstr "Selección do modelo de impresora"

#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
#, c-format
msgid "Which printer model do you have?"
msgstr "¿Qué modelo de impresora ten?"

#: printer/printerdrake.pm:1058
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake non puido determinar qué modelo é a impresora %s. Escolla o "
"modelo correcto da lista."

#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Se a impresora non está na lista, escolla unha compatible (mire o manual da "
"impresora) ou unha similar."

#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4686
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Configurando a impresora \"%s\"..."

#: printer/printerdrake.pm:1111
#, c-format
msgid ""
"Now you have turned off automatic printer setup.\n"
"\n"
msgstr ""
"Agora ten apagada a configuración automática de impresoras.\n"
"\n"

#: printer/printerdrake.pm:1112
#, c-format
msgid ""
"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
"main menu. "
msgstr ""

#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4962
#, c-format
msgid "Configure Auto Administration"
msgstr "Configurar a Administración Automática"

#: printer/printerdrake.pm:1113
#, c-format
msgid ""
"There you can also choose in which situation automatic printer setup is done "
"(On Printerdrake startup, on printing system startup, when connecting a new "
"USB printer)."
msgstr ""

#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
#: printer/printerdrake.pm:4929 printer/printerdrake.pm:5116
#, c-format
msgid "Add a new printer"
msgstr "Engadir unha nova impresora"

#: printer/printerdrake.pm:1262
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Benvid@ ó Asistente de Configuración de Impresoras\n"
"\n"
"Este asistente axudaralle a instalar impresoras locais ou remotas para que "
"sexan usadas dende esta máquina e tamén dende outras máquinas da rede.\n"
"\n"
"Pregúntaralle toda a información necesaria para configurar a impresora e "
"dalle acceso a tódolos drivers para impresoras dispoñibles, as opcións do "
"driver, e os tipos de conexión de impresora."

#: printer/printerdrake.pm:1275
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Benvid@ ó Asistente de Configuración de Impresoras\n"
"\n"
"Este asistente axudaralle a instalar as impresoras conectadas a este "
"ordenador, conectadas directamente á rede ou a unha máquina Windows remota.\n"
"\n"
"Enchufe e prenda tódalas impresoras conectadas a esta máquina para que "
"poidan ser detectadas automáticamente. Tamén as impresoras da rede e as "
"máquinas Windows deben estar conectadas e acesas.\n"
"\n"
"Teña en conta que a detección automática de impresoras na rede leva máis "
"tempo cá detección automática das impresoras conectadas a esta máquina. Así "
"que deshabilite a detección automática das impresoras da rede e/ou que "
"estean conectadas a máquinas Windows cando non a necesite.\n"
"\n"
" Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non "
"desexa configurar as impresoras agora."

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Benvid@ ó Asistente de Configuración de Impresoras\n"
"\n"
"Este asistente axudaralle a instalar as impresoras conectadas a este "
"ordenador.\n"
"\n"
"Enchufe e prenda tódalas impresoras conectadas a esta máquina para que "
"poidan ser detectadas automáticamente.\n"
"\n"
" Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non "
"desexa configurar as impresoras agora."

#: printer/printerdrake.pm:1292
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Benvid@ ó Asistente de Configuración de Impresoras\n"
"\n"
"Este asistente axudaralle a instalar as impresoras conectadas a este "
"ordenador, conectadas directamente á rede.\n"
"\n"
"Se ten impresoras conectadas a esta máquina, enchúfeas a este ordenador e "
"acéndaas para que poidan ser detectadas automáticamente.Tamén as impresoras "
"da rede deben estar conectadas e prendidas.\n"
"\n"
"Teña en conta que a detección automática de impresoras na rede leva máis "
"tempo cá detección automática das impresoras conectadas a esta máquina. Así "
"que deshabilite a detección automática das impresoras da rede cando non a "
"necesite.\n"
"\n"
" Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non "
"desexa configurar as impresoras agora."

#: printer/printerdrake.pm:1301
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Benvid@ ó Asistente de Configuración de Impresoras\n"
"\n"
"Este asistente axudaralle a instalar as impresoras conectadas a este "
"ordenador.\n"
"\n"
"Se ten impresoras conectadas a este ordenador, enchúfeas a este ordenador e "
"préndaas para que poidan ser detectadas automáticamente.\n"
"\n"
" Clique en \"Seguinte\" cando estea preparad@, e en \"Cancelar\" se non "
"desexa configurar as impresoras agora."

#: printer/printerdrake.pm:1352
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Detectar automáticamente as impresoras conectadas a esta máquina"

#: printer/printerdrake.pm:1355
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""
"Detectar automáticamente as impresoras conectadas directamente á rede local."

#: printer/printerdrake.pm:1358
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Detectar automáticamente as impresoras conectadas a máquinas que executan "
"Microsoft Windows"

#: printer/printerdrake.pm:1361
#, c-format
msgid "No auto-detection"
msgstr "Sen detección automática"

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
#: printer/printerdrake.pm:2610
#, c-format
msgid "Could not install the %s packages!"
msgstr "¡Non se puido instala-los paquetes %s!"

#: printer/printerdrake.pm:1419
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr "Omitindo a detección automática de servidor Windows/SMB"

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Printer auto-detection"
msgstr "Detección automática da impresora"

#: printer/printerdrake.pm:1425
#, c-format
msgid "Detecting devices..."
msgstr "Detectando os dispositivos..."

#: printer/printerdrake.pm:1451
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", impresora de rede \"%s\", porto %s"

#: printer/printerdrake.pm:1454
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", impresora \"%s\" nun servidor SMB/Windows \"%s\""

#: printer/printerdrake.pm:1458
#, c-format
msgid "Detected %s"
msgstr "Detectada %s"

#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
#: printer/printerdrake.pm:1505
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Impresora no porto paralelo #%s"

#: printer/printerdrake.pm:1469
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Impresora de rede \"%s\", porto %s"

#: printer/printerdrake.pm:1472
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Impresora \"%s\" no servidor SMB/Windows \"%s\""

#: printer/printerdrake.pm:1550
#, c-format
msgid "Local Printer"
msgstr "Impresora Local"

#: printer/printerdrake.pm:1551
#, fuzzy, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Non se atopou ningunha impresora local! Para instalar manualmente unha "
"impresora introduza un nome de dispositivo/nome de ficheiro na liña de "
"comandos (input line) (Portos Paralelos: /dev/lp0, /dev/lp1, ..., "
"equivalentes a LPT1:, LPT2:, ..., primeira impresora USB: /dev/usb/lp0, "
"segunda impresora USB: /dev/usb/lp1, ...)."

#: printer/printerdrake.pm:1555
#, c-format
msgid "You must enter a device or file name!"
msgstr "Debe introducir un dispositivo ou un nome de ficheiro!"

#: printer/printerdrake.pm:1565
#, c-format
msgid "No printer found!"
msgstr "¡Non se atoparon impresoras!"

#: printer/printerdrake.pm:1573
#, c-format
msgid "Local Printers"
msgstr "Impresoras Locais"

#: printer/printerdrake.pm:1574
#, c-format
msgid "Available printers"
msgstr "Impresoras dispoñibles"

#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Detectouse automáticamente a seguinte impresora. "

#: printer/printerdrake.pm:1580
#, fuzzy, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Se non é a que desexa configurar, introduza un nome de dispositivo/nome de "
"ficheiro na liña de comandos (input line)"

#: printer/printerdrake.pm:1581
#, fuzzy, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"Alternativamente, pode especificar un nome de dispositivo/nome de ficheiro "
"na liña de comandos (input line)"

#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""
"Aqui ten unha lista de tódalas impresoras que se detectaron automáticamente. "

#: printer/printerdrake.pm:1584
#, fuzzy, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Escolla a impresora que desexa configurar ou introduza un nome de "
"dispositivo/nome de ficheiro na liña de comandos (input line)"

#: printer/printerdrake.pm:1585
#, fuzzy, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Escolla a impresora á que deben ir os traballos de impresión ou introduza un "
"nome de dispositivo/nome de ficheiro na liña de comandos (input line)"

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"A configuración da impresora será totalmente automática. Se non se detecta "
"correctamente a súa impresora ou se prefire unha configuración personalizada "
"da impresora, seleccione \"Configuración manual\"."

#: printer/printerdrake.pm:1590
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "Actualmente, non hai ningunha posibilidade alternativa dispoñible"

#: printer/printerdrake.pm:1593
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Elixa a impresora que desexa configurar. A configuración da impresora será "
"totalmente automática. Se non se detecta correctamente a súa impresora ou se "
"prefire unha configuración personalizada da impresora, seleccione "
"\"Configuración manual\"."

#: printer/printerdrake.pm:1594
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Escolla a impresora á que deben ir os traballos."

#: printer/printerdrake.pm:1596
#, fuzzy, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Escolla o porto ó que está conectado a impresora ou introduza un nome de "
"dispositivo/nome de ficheiro na liña de comandos (input line)"

#: printer/printerdrake.pm:1597
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Escolla o porto onde está conectada a impresora."

#: printer/printerdrake.pm:1599
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Portos Paralelos: /dev/lp0, /dev/lp1, ..., equivalentes a LPT1:, "
"LPT2:, ..., 1ª impresora USB: /dev/usb/lp0, 2ª impresora USB: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1603
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Debe escoller/introducir unha impresora/dispositivo!"

#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
#, c-format
msgid "Aborting"
msgstr "Abortando"

#: printer/printerdrake.pm:1679
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Opcións da Impresora remota lpd"

#: printer/printerdrake.pm:1680
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Para usar unha impresora lpd remota, cómpre indicar o nome de máquina do "
"servidor de impresión e o nome da impresora nese servidor."

#: printer/printerdrake.pm:1681
#, c-format
msgid "Remote host name"
msgstr "Nome da máquina remota"

#: printer/printerdrake.pm:1682
#, c-format
msgid "Remote printer name"
msgstr "Nome da impresora remota"

#: printer/printerdrake.pm:1685
#, fuzzy, c-format
msgid "Remote host name missing!"
msgstr "Nome do servidor"

#: printer/printerdrake.pm:1689
#, fuzzy, c-format
msgid "Remote printer name missing!"
msgstr "Nome do servidor"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318 standalone/drakTermServ:447
#: standalone/drakTermServ:769 standalone/drakTermServ:785
#: standalone/drakTermServ:1591 standalone/drakTermServ:1600
#: standalone/drakTermServ:1614 standalone/drakbackup:512
#: standalone/drakbackup:618 standalone/drakbackup:653
#: standalone/drakbackup:754 standalone/draknfs:203
#: standalone/draksambashare:629 standalone/draksambashare:796
#: standalone/harddrake2:276
#, c-format
msgid "Information"
msgstr "Información"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318
#, c-format
msgid "Detected model: %s %s"
msgstr "Modelo detectado: %s %s"

#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Scanning network..."
msgstr "Examinando a rede..."

#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", impresora \"%s\" no servidor \"%s\""

#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Impresora \"%s\" no servidor \"%s\""

#: printer/printerdrake.pm:1859
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Opcións de Impresora SMB (Windows 9x/NT)"

#: printer/printerdrake.pm:1860
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Para imprimir nunha impresora SMB, cómpre fornecer o nome de máquina SMB "
"(Nota! pode ser diferente do seu nome de máquina TCP/IP!) e posiblemente o "
"enderezo IP do servidor de impresión, ademais do nome de recurso compartido "
"da impresora á que quere acceder así coma calquera nome de usuario, "
"información do grupo de traballo ou contrasinal que for necesario."

#: printer/printerdrake.pm:1861
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
" Se a impresora desexada se detectou automáticamente, simplemente escóllaa "
"da lista e despois engada o nome de usuario, o contrasinal, e/ou o grupo de "
"traballo se for necesario."

#: printer/printerdrake.pm:1863
#, c-format
msgid "SMB server host"
msgstr "Servidor de SMB"

#: printer/printerdrake.pm:1864
#, c-format
msgid "SMB server IP"
msgstr "IP do servidor SMB"

#: printer/printerdrake.pm:1865 standalone/draksambashare:67
#, c-format
msgid "Share name"
msgstr "Nome de recurso compartido"

#: printer/printerdrake.pm:1868
#, c-format
msgid "Workgroup"
msgstr "Grupo de traballo"

#: printer/printerdrake.pm:1870
#, c-format
msgid "Auto-detected"
msgstr "Detectada automáticamente"

#: printer/printerdrake.pm:1880
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Cómpre proporcionar o nome do servidor ou o seu IP!"

#: printer/printerdrake.pm:1884
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: printer/printerdrake.pm:1890
#, c-format
msgid "SECURITY WARNING!"
msgstr "¡ADVERTENCIA DE SEGURIDADE!"

#: printer/printerdrake.pm:1891
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1901
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Configure o seu servidor Windows para facer que a impresora estea dispoñible "
"baixo o protocolo IPP e configure a impresión dende esta máquina co tipo de "
"conexión \"%s\" en Printerdrake.\n"
"\n"

#: printer/printerdrake.pm:1904
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Conecte a impresora a un servidor Linux e déixelle ás súas máquinas Windows "
"conectarse a el coma cliente.\n"
"\n"
"Desexa continuar configurando esta impresora como está facendo agora?"

#: printer/printerdrake.pm:1983
#, c-format
msgid "NetWare Printer Options"
msgstr "Opcións de Impresora NetWare"

#: printer/printerdrake.pm:1984
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Para imprimir nunha impresora NetWare, cómpre proporcionar o nome do "
"servidor de impresión NetWare (Nota! pode ser diferente do nome de máquina "
"TCP/IP!) ademais do nome da cola de impresión da impresora á que desexa "
"acceder así coma calquera nome de usuario ou contrasinal que for necesario."

#: printer/printerdrake.pm:1985
#, c-format
msgid "Printer Server"
msgstr "Servidor de Impresión"

#: printer/printerdrake.pm:1986
#, c-format
msgid "Print Queue Name"
msgstr "Nome da Cola de Impresión"

#: printer/printerdrake.pm:1991
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: printer/printerdrake.pm:1995
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", máquina \"%s\", porto %s"

#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Máquina \"%s\", porto %s"

#: printer/printerdrake.pm:2122
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "Opcións da Impresora TCP/Socket"

#: printer/printerdrake.pm:2124
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Escolla unha das impresoras detectadas automáticamente da lista ou introduza "
"o nome de máquina ou IP e opcionalmente o número de porto (o predeterminado "
"é 9100) nos campos de entrada."

#: printer/printerdrake.pm:2125
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Para imprimir nunha impresora TCP ou de socket, ten que fornecer o nome de "
"máquina ou o IP da impresora e opcionalmente o número do porto (por defecto "
"é 9100). Nos servidores HP JetDirect o número de porto normalmente é 9100, "
"noutros servidores pode variar. Mire o manual do seu hardware."

#: printer/printerdrake.pm:2129
#, fuzzy, c-format
msgid "Printer host name or IP missing!"
msgstr "Servidor de impresión"

#: printer/printerdrake.pm:2158
#, c-format
msgid "Printer host name or IP"
msgstr "Nome de máquina ou IP da impresora"

#: printer/printerdrake.pm:2221
#, c-format
msgid "Refreshing Device URI list..."
msgstr "Actualizando a lista de URIs dos Dispositivos..."

#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
#, c-format
msgid "Printer Device URI"
msgstr "URI do Dispositivo de Impresión"

#: printer/printerdrake.pm:2225
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: printer/printerdrake.pm:2249
#, c-format
msgid "A valid URI must be entered!"
msgstr "Débese introducir un URI válido!"

#: printer/printerdrake.pm:2354
#, c-format
msgid "Pipe into command"
msgstr ""

#: printer/printerdrake.pm:2355
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2356
#, c-format
msgid "Command line"
msgstr "Liña de comandos"

#: printer/printerdrake.pm:2360
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: printer/printerdrake.pm:2402
#, c-format
msgid "Your printer %s is currently connected %s."
msgstr ""

#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
#, fuzzy, c-format
msgid "to a parallel port"
msgstr " nun porto paralelo #%s"

#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
#, c-format
msgid "to the USB"
msgstr ""

#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
#, fuzzy, c-format
msgid "via the network"
msgstr "Activando a rede"

#: printer/printerdrake.pm:2407
#, c-format
msgid "This type of connection is currently not fully supported by HPLIP."
msgstr ""

#: printer/printerdrake.pm:2409
#, c-format
msgid "You get full HPLIP support for your device if you connect it "
msgstr ""

#: printer/printerdrake.pm:2415
#, c-format
msgid ""
"You can now set up your device with HPLIP anyway (works in many cases), "
msgstr ""

#: printer/printerdrake.pm:2416
#, c-format
msgid "set it up without HPLIP (print-only), "
msgstr ""

#: printer/printerdrake.pm:2416
#, fuzzy, c-format
msgid "or"
msgstr "Hora"

#: printer/printerdrake.pm:2417
#, c-format
msgid "cancel the setup (for example to reconnect your device)."
msgstr ""

#: printer/printerdrake.pm:2419
#, c-format
msgid ""
"You can always revise your choice by clicking your printer's entry in the "
"main window, "
msgstr ""

#: printer/printerdrake.pm:2420
#, c-format
msgid "clicking the \"%s\" button, "
msgstr ""

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302
#: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319
#: standalone/drakvpn:680 standalone/printerdrake:245
#, c-format
msgid "Edit"
msgstr "Editar"

#: printer/printerdrake.pm:2421
#, c-format
msgid "and choosing \"%s\"."
msgstr ""

#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5312
#: printer/printerdrake.pm:5372
#, c-format
msgid "Printer connection type"
msgstr "Tipo de conexión da impresora"

#: printer/printerdrake.pm:2423 standalone/logdrake:409
#, c-format
msgid "What do you want to do?"
msgstr "¿Qué desexa facer?"

#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
#, c-format
msgid "Set up with HPLIP"
msgstr ""

#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
#, c-format
msgid "Set up without HPLIP"
msgstr ""

#: printer/printerdrake.pm:2426
#, fuzzy, c-format
msgid "Cancel setup"
msgstr "Cancelar"

#: printer/printerdrake.pm:2460
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2462
#, fuzzy, c-format
msgid ""
"To access these extra functions on HP printers they must be set up with "
"HPLIP (HP Linux Imaging and Printing). "
msgstr ""
"Para acceder a estas funcións extra na súa impresora HP, debe configurarse "
"co software apropiado: "

#: printer/printerdrake.pm:2464
#, fuzzy, c-format
msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
msgstr "Cal é a súa elección (elixa \"Ningún\" para impresoras non HP)? "

#: printer/printerdrake.pm:2490
#, c-format
msgid "Installing %s package..."
msgstr "Instalando o paquete %s..."

#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
#: printer/printerdrake.pm:2524
#, c-format
msgid "HPLIP"
msgstr "HPLIP"

#: printer/printerdrake.pm:2497
#, c-format
msgid "Only printing will be possible on the %s."
msgstr "Só será posible imprimir en %s."

#: printer/printerdrake.pm:2512
#, fuzzy, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr ""
"Non foi posible crear o directorio do usuario de configuración de gnome `%"
"s': %s\n"

#: printer/printerdrake.pm:2514
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr "Elimine o ficheiro a man e reinicie HPOJ."

#: printer/printerdrake.pm:2524
#, c-format
msgid "Checking device and configuring %s..."
msgstr "Comprobando o dispositivo e configurando %s..."

#: printer/printerdrake.pm:2544
#, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "Que impresora desexa configurar con HPLIP?"

#: printer/printerdrake.pm:2599
#, c-format
msgid "Installing SANE packages..."
msgstr "Instalando os paquetes SANE..."

#: printer/printerdrake.pm:2612
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr "Non será posible dixitalizar en %s."

#: printer/printerdrake.pm:2627
#, c-format
msgid "Using and Maintaining your %s"
msgstr ""

#: printer/printerdrake.pm:2641
#, c-format
msgid "Configuring device..."
msgstr "Configurando o dispositivo..."

#: printer/printerdrake.pm:2678
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Facendo que o porto da impresora estea dispoñible para CUPS..."

#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
#: printer/printerdrake.pm:3115
#, c-format
msgid "Reading printer database..."
msgstr "Lendo a base de datos da impresora..."

#: printer/printerdrake.pm:2920
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Introduza o Nome da Impresora e os Comentarios"

#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "O nome da impresora debe conter só letras, números e o guión baixo"

#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"A impresora \"%s\" xa existe,\n"
"¿desexa sobrescribi-la súa configuración?"

#: printer/printerdrake.pm:2937
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""
"O nome da impresora \"%s\" ten máis de 12 caracteres o que pode facer que a "
"impresora non estea dispoñible dende os clientes Windows. Desexa usar este "
"nome?"

#: printer/printerdrake.pm:2946
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Tódalas impresoras necesitan un nome (por exemplo \"Impresora\"). Os campos "
"de Descrición e Localización non son imprescindibles. Son comentarios para "
"os usuario."

#: printer/printerdrake.pm:2947
#, c-format
msgid "Name of printer"
msgstr "Nome da impresora"

#: printer/printerdrake.pm:2948 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Description"
msgstr "Descrición"

#: printer/printerdrake.pm:2949 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Location"
msgstr "Localización"

#: printer/printerdrake.pm:2967
#, c-format
msgid "Preparing printer database..."
msgstr "Preparando a base de datos da impresora..."

#: printer/printerdrake.pm:3093
#, c-format
msgid "Your printer model"
msgstr "Modelo de impresora"

#: printer/printerdrake.pm:3094
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
#, c-format
msgid "The model is correct"
msgstr "O modelo é correcto"

#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
#: printer/printerdrake.pm:3104
#, c-format
msgid "Select model manually"
msgstr "Seleccione o modelo a man"

#: printer/printerdrake.pm:3128
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:3147
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr "Instalar un ficheiro PPD proporcionado polo fabricante"

#: printer/printerdrake.pm:3179
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""
"Cada impresora PostScript distribuese cun ficheiro PPD que describe as "
"opcións e as características da impresora."

#: printer/printerdrake.pm:3180
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""
"Este ficheiro está normalmente no CD dos drivers para Windows e Mac que se "
"distribúe ca impresora."

#: printer/printerdrake.pm:3181
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr "Tamén pode atopa-los ficheiros PPD nos sitios web dos fabricantes."

#: printer/printerdrake.pm:3182
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""
"Se ten o Windows instalado, tamén pode atopa-lo ficheiro PPD na partición de "
"Windows."

#: printer/printerdrake.pm:3183
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""
"Instalar o ficheiro PPD da impresora e usalo ó configurar a impresora fai "
"que estean dispoñibles tódalas opcións da impresora que proporciona o "
"hardware da mesma"

#: printer/printerdrake.pm:3184
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""
"Aquí pode escoller o ficheiro PPD que se instalará na súa máquina, e que "
"despois se vai usar para a configuración da súa impresora."

#: printer/printerdrake.pm:3186
#, c-format
msgid "Install PPD file from"
msgstr "Instala-lo ficheiro PPD dende"

#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, c-format
msgid "Floppy Disk"
msgstr "Disquete"

#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, c-format
msgid "Other place"
msgstr "Outro sitio"

#: printer/printerdrake.pm:3205
#, c-format
msgid "Select PPD file"
msgstr "Seleccione o ficheiro PPD"

#: printer/printerdrake.pm:3209
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr "¡O ficheiro PPD %s non existe ou non se pode ler!"

#: printer/printerdrake.pm:3215
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr "O ficheiro PPD %s non cumpre as especificacións PPD!"

#: printer/printerdrake.pm:3226
#, c-format
msgid "Installing PPD file..."
msgstr "Instalando o ficheiro PPD..."

#: printer/printerdrake.pm:3345
#, c-format
msgid "OKI winprinter configuration"
msgstr "Configuración de OKI winprinter"

#: printer/printerdrake.pm:3346
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
#, fuzzy, c-format
msgid "Lexmark inkjet configuration"
msgstr "Configuración de Internet"

#: printer/printerdrake.pm:3372
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3402
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3412
#, c-format
msgid "Lexmark X125 configuration"
msgstr "Configuración de Lexmark X125"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""
"O driver para esta impresora só soporta impresoras conectadas localmente a "
"través de USB, pero non impresoras en máquinas remotas ou servidores de "
"impresión. Conecte a súa impresora a un porto USB local ou configúrea na "
"máquina á que está conectada."

#: printer/printerdrake.pm:3435
#, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "Configuración de Samsung ML/QL-85G"

#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""
"O driver para esta impresora só soporta impresoras conectadas localmente ó "
"primeiro porto paralelo, pero non impresoras en máquinas remotas ou "
"servidores de impresión ou noutro porto paralelo. Conecte a súa impresora ó "
"primeiro porto paralelo ou configúrea na máquina á que está conectada."

#: printer/printerdrake.pm:3462
#, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "Configuración de Canon LBP-460/660"

#: printer/printerdrake.pm:3489
#, c-format
msgid "Canon LBP-810/1120 (CAPT) configuration"
msgstr "Configuración de Canon LBP-810/1120 (CAPT)"

#: printer/printerdrake.pm:3490
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes or on the parallel "
"port. Please connect your printer to the USB or configure it on the machine "
"where it is directly connected to."
msgstr ""
"O driver para esta impresora só soporta impresoras conectadas localmente a "
"través de USB, pero non impresoras en máquinas remotas ou servidores de "
"impresión ou no porto paralelo. Conecte a súa impresora a un porto USB ou "
"configúrea na máquina á que está conectada directamente."

#: printer/printerdrake.pm:3497
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "Actualización do Firmware de HP LaserJet 1000"

#: printer/printerdrake.pm:3647
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: printer/printerdrake.pm:3772
#, c-format
msgid "Printer default settings"
msgstr "Preferencias por omisión da impresora"

#: printer/printerdrake.pm:3779
#, c-format
msgid "Option %s must be an integer number!"
msgstr "¡A opción %s debe ser un número enteiro!"

#: printer/printerdrake.pm:3783
#, c-format
msgid "Option %s must be a number!"
msgstr "¡A opción %s debe ser un número!"

#: printer/printerdrake.pm:3787
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"¿Desexa que establecer esta impresora (\"%s\")\n"
"coma a impresora por defecto?"

#: printer/printerdrake.pm:3855
#, c-format
msgid "Test pages"
msgstr "Páxinas de proba"

#: printer/printerdrake.pm:3856
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: printer/printerdrake.pm:3860
#, c-format
msgid "No test pages"
msgstr "Non hai páxinas de proba"

#: printer/printerdrake.pm:3861
#, c-format
msgid "Print"
msgstr "Imprimir"

#: printer/printerdrake.pm:3886
#, c-format
msgid "Standard test page"
msgstr "Páxina estándar de proba"

#: printer/printerdrake.pm:3889
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Páxina de proba alternativa (Letra)"

#: printer/printerdrake.pm:3892
#, c-format
msgid "Alternative test page (A4)"
msgstr "Páxina de proba alternativa (A4)"

#: printer/printerdrake.pm:3894
#, c-format
msgid "Photo test page"
msgstr "Páxina de proba con foto"

#: printer/printerdrake.pm:3907
#, c-format
msgid "Printing test page(s)..."
msgstr "Imprimindo páxina(s) de proba..."

#: printer/printerdrake.pm:3927
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "Imprimindo páxina(s) de proba..."

#: printer/printerdrake.pm:3944
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"A(s) páxina(s) de proba enviáronse á impresora.\n"
"Pode que lle leve un pouco ata que a impresora comece.\n"
"Estado da impresión:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3948
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"A(s) páxina(s) de proba enviáronse á impresora.\n"
"Pode que lle leve un pouco ata que a impresora comece.\n"

#: printer/printerdrake.pm:3958
#, c-format
msgid "Did it work properly?"
msgstr "¿Traballa de xeito correcto?"

#: printer/printerdrake.pm:3982
#, c-format
msgid "Raw printer"
msgstr "Impresora raw"

#: printer/printerdrake.pm:4004
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Para imprimir un ficheiro dende a liña de comandos (ventá de terminal) pode "
"usar o comando \"%s <ficheiro>\" ou unha ferramenta de impresión gráfica: "
"\"xpp <ficheiro>\" ou \"kprinter <ficheiro>\". As ferramentas gráficas "
"permítenlle elixir a impresora e modificar a configuración de maneira "
"sinxela.\n"

#: printer/printerdrake.pm:4006
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Estes comandos tamén pode usalos no campo \"Comando de impresión\" dos "
"diálogos de impresión de moitas aplicacións, pero aquí non proporcione o "
"nome do ficheiro a imprimir porque xa o proporciona a aplicación.\n"

#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
#: printer/printerdrake.pm:4036
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"O comando \"%s\" tamén permite modificar a configuración para un traballo de "
"impresión. Simplemente engada as opcións desexadas á liña de comandos, p.ex. "
"\"%s <ficheiro>\". "

#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Para saber cales son as opcións dispoñibles para a impresora actual lea a "
"lista que se amosa embaixo ou clique no botón \"Imprimir lista de opcións\".%"
"s%s%s\n"
"\n"

#: printer/printerdrake.pm:4016
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Aqui ten unha lista das opcións de impresión dispoñibles para a impresora "
"actual:\n"
"\n"

#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Para imprimir un ficheiro dende a liña de comandos (ventá de terminal) use o "
"comando \"%s <file>\".\n"

#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
#: printer/printerdrake.pm:4043
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Para obter unha lista das opcións de impresión dispoñibles para a impresora "
"actual prema o botón \"Lista de opcións de impresión\"."

#: printer/printerdrake.pm:4041
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Para imprimir un ficheiro dende a liña de comandos (ventá de termianl) use o "
"comando\"%s <file>\" ou \"%s <file>\".\n"

#: printer/printerdrake.pm:4045
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:4049
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Os comandos \"%s\" e \"%s\" tamén permiten modificar a configuración para un "
"traballo de impresión. Simplemente engada as opcións desexadas á liña de "
"comandos, p.ex. \"%s <ficheiro>\". \n"

#: printer/printerdrake.pm:4058
#, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "Usando/Mantendo a impresora \"%s\""

#: printer/printerdrake.pm:4059
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Imprimindo na impresora \"%s\""

#: printer/printerdrake.pm:4065
#, c-format
msgid "Print option list"
msgstr "Lista de opcións de impresión"

#: printer/printerdrake.pm:4069
#, fuzzy, c-format
msgid "Printing option list..."
msgstr "Lista de opcións de impresión"

#: printer/printerdrake.pm:4087
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4090
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""
"O escáner da súa impresora pode usarse co software SANE, por exemplo Kooka "
"ou XSane (Ámbolos dous no menú Multimedia/Gráficos). "

#: printer/printerdrake.pm:4091
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""
"Execute Scannerdrake (Hardware/Escáner no Centro de Control de Mandriva "
"Linux) para compartir o seu escáner na rede.\n"
"\n"

#: printer/printerdrake.pm:4095
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""
"Pódese acceder ós lectores de tarxetas de memoria da súa impresora coma se "
"foran dispositivos USB de almacenamento masivo normais."

#: printer/printerdrake.pm:4096
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""
"Despois de inserir unha tarxeta debería aparecer no escritorio unha icona "
"dun disco duro para acceder á tarxeta.\n"
"\n"

#: printer/printerdrake.pm:4098
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:4099
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""
"Teña en conta que isto é moi lento, ler imaxes dende unha cámara ou un "
"lector de tarxetas USB é normalmente máis rápido.\n"
"\n"

#: printer/printerdrake.pm:4102
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4103
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:4104
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:4105
#, c-format
msgid " - Print head alignment\n"
msgstr " - Aliñación das cabezas de impresión\n"

#: printer/printerdrake.pm:4106
#, c-format
msgid " - Color calibration\n"
msgstr " - Calibración da cor\n"

#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
#: printer/printerdrake.pm:4209
#, c-format
msgid "Transfer printer configuration"
msgstr "Transferi-la configuración da impresora"

#: printer/printerdrake.pm:4148
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: printer/printerdrake.pm:4151
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: printer/printerdrake.pm:4153
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ só soporta as impresoras locais, as impresoras LPD remotas, e as "
"impresoras Socket/TCP.\n"

#: printer/printerdrake.pm:4155
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD e LPRng non soportan as impresoras IPP.\n"

#: printer/printerdrake.pm:4157
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4158
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: printer/printerdrake.pm:4159
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Marque as impresoras que desexa transferir e prema \n"
"\"Transferir\"."

#: printer/printerdrake.pm:4162
#, c-format
msgid "Do not transfer printers"
msgstr "Non transferir impresoras"

#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
#, c-format
msgid "Transfer"
msgstr "Transferir"

#: printer/printerdrake.pm:4175
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: printer/printerdrake.pm:4196
#, c-format
msgid "New printer name"
msgstr "Novo nome de impresora"

#: printer/printerdrake.pm:4199
#, c-format
msgid "Transferring %s..."
msgstr "Transferindo %s..."

#: printer/printerdrake.pm:4210
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4220
#, c-format
msgid "Refreshing printer data..."
msgstr "Actualizando os datos da impresora..."

#: printer/printerdrake.pm:4230
#, c-format
msgid "Starting network..."
msgstr "Iniciando a rede..."

#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4278
#: printer/printerdrake.pm:4280
#, c-format
msgid "Configure the network now"
msgstr "Configura-la rede agora"

#: printer/printerdrake.pm:4275
#, c-format
msgid "Network functionality not configured"
msgstr "Funcionalidade de rede non configurada"

#: printer/printerdrake.pm:4276
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Vai configurar unha impresora remota. Para isto cómpre un acceso á rede que "
"funcione, pero a súa rede ainda non está configurada. Se continúa sen "
"configurar a rede, non poderá usar a impresora que está configurando agora. "
"Que desexa facer?"

#: printer/printerdrake.pm:4279
#, c-format
msgid "Go on without configuring the network"
msgstr "Continuar sen configura-la rede"

#: printer/printerdrake.pm:4310
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"A configuración da rede feita durante a instalación non se pode iniciar "
"agora. Verifique se a rede é accesible despois de arrincar o sistema e "
"corrixa a configuración usando a sección \"Rede & Internet\"/\"Conexión\" do "
"Centro de Control de %s,  e despois configure a impresora, usando tamén a "
"sección \"Hardware\"/\"Impresoras\" do Centro de Control de %s"

#: printer/printerdrake.pm:4311
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"O acceso é rede non está funcionando e non pode iniciarse. Verifique a "
"configuración e o hardware. Despois intente configurar outra vez a impresora "
"remota."

#: printer/printerdrake.pm:4321
#, c-format
msgid "Restarting printing system..."
msgstr "Reiniciando o sistema de impresión..."

#: printer/printerdrake.pm:4352
#, c-format
msgid "high"
msgstr "alto"

#: printer/printerdrake.pm:4352
#, c-format
msgid "paranoid"
msgstr "paranoico"

#: printer/printerdrake.pm:4354
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Instalando un sistema de impresión cun nivel de seguridade %s"

#: printer/printerdrake.pm:4355
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Está a piques de instalar o sistema de impresión %s nun sistema que se está "
"executando co nivel de seguridade %s.\n"
"\n"
"Este sistema de impresión executa un daemon (proceso que se executa por "
"detrás) o cal agarda por traballos de impresión e os manexa. Este daemon "
"tamén é accesible por máquinas remotas a través da rede e é así un posible "
"obxectivo de ataques. Polo tanto só se inician de maneira predeterminada uns "
"poucos daemons seleccionados neste nivel de seguridade.\n"
"\n"
"Desexa configurar o sistema de impresión nesta máquina?"

#: printer/printerdrake.pm:4391
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Inicia-lo sistema de impresión ó inicia-lo sistema"

#: printer/printerdrake.pm:4392
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"O sistema de impresión (%s) non se iniciará automáticamente cando arrinca a "
"máquina.\n"
"\n"
"É posible que o inicio automático se desactivara ó cambiar a un nivel de "
"seguridade superior, porque o sistema de impresión é un punto potencial de "
"ataques.\n"
"\n"
"Desexa activar de novo o inicio automático do sistema de impresión?"

#: printer/printerdrake.pm:4415
#, c-format
msgid "Checking installed software..."
msgstr "Comprobando o software instalado..."

#: printer/printerdrake.pm:4421
#, c-format
msgid "Removing %s..."
msgstr "Eliminando %s ..."

#: printer/printerdrake.pm:4425
#, c-format
msgid "Could not remove the %s printing system!"
msgstr "¡Non se pode elimina-lo sistema de impresión %s!"

#: printer/printerdrake.pm:4449
#, c-format
msgid "Installing %s..."
msgstr "Instalando %s ..."

#: printer/printerdrake.pm:4453
#, c-format
msgid "Could not install the %s printing system!"
msgstr "¡Non se pode instala-lo sistema de impresión %s!"

#: printer/printerdrake.pm:4521
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""
"Neste modo non hai sistema de impresión local, tódalas solicitudes de "
"impresión van directamente ó servidor especificado embaixo. Teña en conta "
"que non é posible definir colas de impresión locais e se o servidor "
"especificado está caido non se poderá imprimir dende esta máquina."

#: printer/printerdrake.pm:4523
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""
"Introduza o nome de máquina ou IP do servidor CUPS e clique Aceptar se "
"desexa usar este modo, senón clique \"Saír\"."

#: printer/printerdrake.pm:4537
#, c-format
msgid "Name or IP of remote server:"
msgstr "Nome ou IP do servidor remoto:"

#: printer/printerdrake.pm:4557
#, c-format
msgid "Setting Default Printer..."
msgstr "Establecendo Impresora por Defecto..."

#: printer/printerdrake.pm:4577
#, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "Sistema de impresión CUPS local ou servidor CUPS remoto?"

#: printer/printerdrake.pm:4578
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr "O sistema de impresión CUPS pode usarse de dúas maneiras:"

#: printer/printerdrake.pm:4580
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr "1. O sistema de impresión CUPS pode executarse de xeito local. "

#: printer/printerdrake.pm:4581
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""
"Despois poderanse usar as impresoras conectadas localmente e descubriranse "
"automáticamente as impresoras remotas noutros servidores CUPS da mesma rede. "

#: printer/printerdrake.pm:4582
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""
"A desvantaxe disto é que se necesitan máis recursos na máquina local: Cómpre "
"instalar paquetes de software adicionais, tense que executar por detrás o "
"daemon CUPS e necesita algunha memoria, e o porto IPP (porto 631) está "
"aberto."

#: printer/printerdrake.pm:4584
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""
"2. Tódalas solicitudes de impresión envíanse inmediatamente a un servidor "
"CUPS remoto. "

#: printer/printerdrake.pm:4585
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4586
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""
"A desvantaxe é que non é posible definir impresoras locais e se o servidor "
"especificado está caído non se poderá imprimir dende esta máquina."

#: printer/printerdrake.pm:4588
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr "Como debe estar configurado CUPS na súa máquina?"

#: printer/printerdrake.pm:4592 printer/printerdrake.pm:4607
#: printer/printerdrake.pm:4611 printer/printerdrake.pm:4617
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr "Servidor remoto, especifique o Nome ou IP aquí:"

#: printer/printerdrake.pm:4606
#, c-format
msgid "Local CUPS printing system"
msgstr "Sistema de impresión CUPS local"

#: printer/printerdrake.pm:4645
#, fuzzy, c-format
msgid "Select Printer Spooler"
msgstr "Selección da conexión da impresora"

#: printer/printerdrake.pm:4646
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Que sistema de impresión (spooler) desexa usar?"

#: printer/printerdrake.pm:4695
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "¡Fallo ó configura-la impresora \"%s\"!"

#: printer/printerdrake.pm:4710
#, c-format
msgid "Installing Foomatic..."
msgstr "Instalando Foomatic..."

#: printer/printerdrake.pm:4716
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr "Non se puideron instalar os paquetes %s, non se pode iniciar %s!"

#: printer/printerdrake.pm:4911
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"As seguintes impresoras están configuradas. Clique dúas veces nunha "
"impresora para cambia-las súas preferencias; para facela a impresora por "
"defecto; ou para ve-la súa información. "

#: printer/printerdrake.pm:4941
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "Amosar tódalas impresoras remotas CUPS dispoñibles"

#: printer/printerdrake.pm:4942
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
"Actualiza-la lista de impresoras (para amosar tódalas impresoras remotas "
"CUPS dispoñibles)"

#: printer/printerdrake.pm:4953
#, c-format
msgid "CUPS configuration"
msgstr "Configuración de CUPS"

#: printer/printerdrake.pm:4974
#, c-format
msgid "Change the printing system"
msgstr "Cambia-lo sistema de impresión"

#: printer/printerdrake.pm:4983
#, c-format
msgid "Normal Mode"
msgstr "Modo Normal"

#: printer/printerdrake.pm:4984
#, c-format
msgid "Expert Mode"
msgstr "Modo Experto"

#: printer/printerdrake.pm:5262 printer/printerdrake.pm:5318
#: printer/printerdrake.pm:5404 printer/printerdrake.pm:5413
#, c-format
msgid "Printer options"
msgstr "Opcións da impresora"

#: printer/printerdrake.pm:5298
#, c-format
msgid "Modify printer configuration"
msgstr "Modifica-la configuración da impresora"

#: printer/printerdrake.pm:5300
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""
"Impresora %s%s\n"
"¿Qué desexa modificar nesta impresora?"

#: printer/printerdrake.pm:5305
#, c-format
msgid "This printer is disabled"
msgstr "Esta impresora está deshabilitada"

#: printer/printerdrake.pm:5307
#, c-format
msgid "Do it!"
msgstr "¡Faino!"

#: printer/printerdrake.pm:5313 printer/printerdrake.pm:5378
#, c-format
msgid "Printer name, description, location"
msgstr "Nome da impresora, descrición, localización"

#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Fabricante da impresora, modelo, controlador"

#: printer/printerdrake.pm:5316 printer/printerdrake.pm:5398
#, c-format
msgid "Printer manufacturer, model"
msgstr "Fabricante da impresora, modelo"

#: printer/printerdrake.pm:5320 printer/printerdrake.pm:5408
#, c-format
msgid "Set this printer as the default"
msgstr "Establecer esta impresora coma a impresora por defecto"

#: printer/printerdrake.pm:5325 printer/printerdrake.pm:5414
#: printer/printerdrake.pm:5416 printer/printerdrake.pm:5425
#, c-format
msgid "Enable Printer"
msgstr "Activar Impresora"

#: printer/printerdrake.pm:5328 printer/printerdrake.pm:5419
#: printer/printerdrake.pm:5420 printer/printerdrake.pm:5422
#, c-format
msgid "Disable Printer"
msgstr "Desactivar Impresora"

#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5426
#, fuzzy, c-format
msgid "Printer communication error handling"
msgstr "Tipo de conexión da impresora"

#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5430
#, c-format
msgid "Print test pages"
msgstr "Imprimi-la(s) páxina(s) de proba"

#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5432
#, c-format
msgid "Learn how to use this printer"
msgstr "Aprender cómo usar esta impresora"

#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5434
#, c-format
msgid "Remove printer"
msgstr "Eliminar impresora"

#: printer/printerdrake.pm:5386
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Eliminando a impresora vella \"%s\"..."

#: printer/printerdrake.pm:5417
#, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "A impresora \"%s\" está activada."

#: printer/printerdrake.pm:5423
#, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "A impresora \"%s\" está desactivada."

#: printer/printerdrake.pm:5465
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "¿Desexa elimina-la impresora \"%s\""

#: printer/printerdrake.pm:5469
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Eliminando a impresora \"%s\"..."

#: printer/printerdrake.pm:5493
#, c-format
msgid "Default printer"
msgstr "Impresora por defecto"

#: printer/printerdrake.pm:5494
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "A impresora por defecto é \"%s\"."

#: raid.pm:41
#, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "Non se puido engadir unha partición ó RAID _formatado_ %s"

#: raid.pm:145
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Non hai particións dabondo para o nivel RAID %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr "¡Non se puido crea-lo directorio /usr/share/sane/firmware!"

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr "¡Non se puido crea-lo enlace /usr/share/sane/%s!"

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""
"¡Non se puido copia-lo ficheiro de firmware %s a /usr/share/sane/firmware!"

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""
"Non se puideron instalar os paquetes necesarios para compartir os seus "
"escáners."

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""
"Os seus escáners non estarán dispoñibles para os usuarios que non sexan root"

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr "Permitir/Prohibir o login automático."

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr "Permitir/Prohibir o reinicio ó usuario da consola."

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "Permitir/Prohibir login remoto ó usuario root."

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "Permitir/Prohibir login directo do usuario root."

#: security/help.pm:33
#, fuzzy, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Permitir/Prohibir ve-la lista de usuarios do sistema nos xestores         "
"(kdm e gdm)."

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Permitir/Prohibir as conexións X:\n"
"\n"
"- TODAS (permitir tódalas conexións),\n"
"\n"
"- LOCAIS (só se permiten as conexións dende a máquina local),\n"
"\n"
"- NINGUNHA (sen conexión)."

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"O argumento especifica se os clientes están autorizados a\n"
"conectarse ó servidor X dende a rede polo porto tcp 6000."

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Activar/Desactivar crontab e at para os  usuarios.\n"
"\n"
"Poña os usuarios ós que se lles permite usalos en /etc/cron.allow e\n"
"/etc/at.allow (vexa man at(1) e crontab(1))."

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:215
#, c-format
msgid "Security Alerts:"
msgstr "Alertas de Seguridade:"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr "Activar/Desactivar libsafe se se atopa libsafe no sistema."

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "Activar/Desactivar o rexistro de paquetes IPv4 estraños."

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
" Habilitar su só dende os membros do grupo wheel ou permitir su dende "
"calquera usuario."

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr "Usar contrasinal para autenticar ós usuarios."

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr " Activar/Deshabilitar a comprobación diaria de seguridade."

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""
"Configurar a lonxitude do historial de contrasinais para previr a "
"reutilización de contrasinais."

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Establece-la lonxitude mínima, o número mínimo de díxitos e o número mínimo "
"de letras maiúsculas do contrasinal."

#: security/help.pm:108
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "Sen contrasinal"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr "se está a si, compróbanse os portos abertos."

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"se está a si, compróbanse os permisos dos ficheiros do directorio persoal do "
"usuario"

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
"se está a si, comprobarase se os dispositivos de rede están en modo "
"promiscuo."

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "se está a si, executaranse as comprobacións de seguridade diariamente."

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr "se está a sí, verifica a adición/eliminación de ficheiros sgid."

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "se está a si, comproba contrasinais baleiros en /etc/shadow."

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
"se está a sí, verifica as sumas de comprobación dos ficheiros suid/sgid."

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr "se está a si, informa de ficheiros sen dono."

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"se está a si, comprobaranse os ficheiros/directorios escribibles por todos."

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "se está a sí, envía o informe do resultado da comprobación por correo."

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr "Non enviar correos-e se non hai nada do que avisar"

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "se está a si, devolve o resultado da comprobación a syslog."

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "se está a si, devolve o resultado da comprobación a tty."

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Establece-lo tamaño do historial de comandos da shell. O valor -1 significa "
"sen límite."

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, fuzzy, c-format
msgid "Set the user umask."
msgstr "Usuarios"

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr "/etc/issue* existe"

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr "Permitirlle o login remoto ó usuario root"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, c-format
msgid "Allow X Window connections"
msgstr "Permitir conexións X Window"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr "Autorizar conexións TCP a X Window"

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "Configurar servicios"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr "Activar \"crontab\" e \"at\" para os usuarios"

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr "Activar libsafe se se atopa no sistema"

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr "Activar o rexistro de paquetes IPv4 estraños"

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr "Habilita su só dende membros do grupo wheel ou para calquera usuario"

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr "Usar contrasinais para autenticar os usuarios"

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr "Comprobación de seguridade diaria"

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, fuzzy, c-format
msgid "No password aging for"
msgstr "Sen contrasinal"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, c-format
msgid "Password history length"
msgstr "Lonxitude do historial de contrasinais"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""
"Lonxitude mínima e número de díxitos e letras maiúsculas do contrasinal"

#: security/l10n.pm:41
#, fuzzy, c-format
msgid "Root umask"
msgstr "Sen contrasinal"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr "Tamaño do historial da shell"

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr ""

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "User umask"
msgstr "Usuarios"

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr "Comproba-los portos abertos"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""
"Verificar os permisos dos ficheiros nos directorios persoais dos usuarios"

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr "Comprobar se os dispositivos de rede están en modo promiscuo"

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr "Executar as comprobacións de seguridade diariamente"

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "Verificar adicións/eliminacións de ficheiros sgid"

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr "Comproba contrasinais baleiros en /etc/shadow"

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "Verificar as sumas de comprobación dos ficheiros suid/sgid"

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr "Informar dos ficheiros sen propietario"

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "Comprobar os ficheiros/directorios escribibles por tods"

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr "Non enviar correos-e cando non cómpre"

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr "Enviar o resultado da comprobación por correo"

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr "Realizar algunhas comprobacións sobre a base de datos rpm"

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr "Enviar o resultado da comprobación a syslog"

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr "Enviar o resultado da comprobación a unha tty"

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Benvid@ A Crackers"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Pobre"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Alto"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Moi Alto"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Paranoico"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa máis\n"
"sinxelo de utilizar, pero é moi sensible: non debe usarse nunha máquina\n"
"conectada a outras ou á Internet. Non hai contrasinais de acceso."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Os contrasinais están activados, pero o uso como ordenador de rede aínda\n"
"non se recomenda."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Esta é a seguridade recomendada para un ordenador usado para conectar\n"
"á Internet como cliente."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Xa hai algunhas restriccións, e executaranse máis comprobacións\n"
"automáticas cada noite."

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Con este nivel de seguridade, é posible usar este sistema coma servidor.\n"
"A seguridade é agora alta dabondo para usa-lo sistema coma un servidor\n"
"que acepta conexións de múltiples clientes.\n"
"Nota: se a súa máquina só é un cliente da Internet, debe escoller un nivel "
"menor."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Este é similar ó nivel anterior, pero agora o sistema está completamente\n"
"pechado. As características de seguridade están ó máximo nivel."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "Opcións Básicas de DrakSec"

#: security/level.pm:57
#, c-format
msgid "Please choose the desired security level"
msgstr "Escolla o nivel de seguridade"

#: security/level.pm:61
#, c-format
msgid "Security level"
msgstr "Nivel de seguridade"

#: security/level.pm:63
#, c-format
msgid "Use libsafe for servers"
msgstr "Usar libsafe para os servidores"

#: security/level.pm:64
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: security/level.pm:65
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Administrador de Seguridade (login ou correo-e)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Executa-lo sistema de son ALSA (Advanced Linux Sound Architecture)"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron, un xestor de comandos periódicos."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd úsase para monitoriza-lo estado da batería e rexistralo a través do\n"
"syslog. Tamén pode usarse para apaga-la máquina cando a batería está baixa."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Executa os comandos programados polo comando at á hora indicada\n"
"cando se executou at, e executa comandos de lotes cando a carga media\n"
"é baixa dabondo."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"O cron é un programa estándar de UNIX que executa programas\n"
"especificados polo usuario en datas periódicas programadas. O vixie\n"
"cron engade algunhas características ó cron básico de UNIX, incluindo\n"
"mellor seguridade e opcións de configuración máis potentes."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""
"FAM é un daemon de monitorización de ficheiros. Úsase para obter informes "
"cando os ficheiros cambian.\n"
"Úsano o GNOME e o KDE"

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM engade soporte para o rato ás aplicacións de texto de Linux, coma\n"
"o Midnight Commander. Tamén permite operacións de cortar e pegar co\n"
"rato na consola, e inclúe soporte para menús na consola."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake fai probas de hardware, e opcionalmente configura o\n"
"hardware novo/cambiado."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache é un servidor de World Wide Web. Úsase para servir ficheiros\n"
"HTML e CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"O daemon superservidor de internet (normalmente chamado inetd) lanza\n"
"varios outros servicios de internet cando se precisan. É o responsable de\n"
"iniciar moitos servicios, incluíndo telnet, ftp, rsh, e rlogin. Desactivando "
"o\n"
"inetd desactívanse tódolos servicios de internet dos que é responsable."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Execute o filtrado de paquetes do kernel Linux serie 2.2,\n"
"para configurar un cortalumes que protexa a súa máquina\n"
"de ataques dende a rede."

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Este paquete carga o mapa de teclado seleccionado en\n"
"/etc/sysconfig/keyboard. Este pode escollerse usando a utilidade\n"
"kbdconfig. Debería deixar isto activado para a maioría dos sistemas."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Configuración e detección automática do hardware ó arrincar."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Algunhas veces, Linuxconf levará a cabo varias tarefas ó arrincar para\n"
"mante-la configuración do sistema."

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd é o daemon de impresión requirido para que o lpr funcione\n"
"correctamente. É basicamente un servidor que distribúe os traballos de\n"
"impresión á(s) impresora(s)."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtual Server, úsase para construir un servidor de alto\n"
"rendemento e alta dispoñibilidade."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) é un Servidor de Nomes de Dominio (DNS), que se\n"
"emprega para converte-los nomes das máquinas en enderezos IP."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Monta e desmonta tódolos puntos de montaxe de Sistemas de\n"
"Ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Activa/desactiva tódalas interfaces de rede configuradas para\n"
"seren activadas no arrinque."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS é un protocolo popular para compartir ficheiros a través de redes TCP/"
"IP.\n"
"Este servicio fornece funcionalidade de servidor NFS, que se configura "
"usando\n"
"o ficheiro /etc/exports."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS é un protocolo popular para compartir ficheiros a través de\n"
"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"O soporte PCMCIA é normalmente para cousas coma ethernet e módems\n"
"en portátiles.  Non será arrincado ata que non estea configurado de xeito\n"
"que non haxa problemas ó telo instalado en máquinas que non o precisan."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"O portmapper xestiona as conexións RPC, que son usadas por protocolos\n"
"coma NFS e NIS. O servidor portmap ten que estar a se executar en\n"
"máquinas que actúan de servidores de protocolos que usan o mecanismo\n"
"RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix é un Axente de Transporte de Correo (MTA), que é o programa\n"
"que move o correo dunha máquina a outra."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Garda e restaura o estado da entropía do sistema para unha xeración\n"
"de números aleatorios de calidade."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"O daemon routed permite actualizacións automáticas da táboa de\n"
"encamiñamento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
"en redes pequenas, outros protocolos máis complexos de encamiñamento\n"
"precísanse para redes máis complexas."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"O protocolo rstat permite ós usuarios dunha rede obter\n"
"métricas de rendemento de calquera máquina desa rede."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"O protocolo rusers permite ós usuarios dunha rede identificar quen\n"
"está conectado noutras máquinas activas."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"O protocolo rwho permite que os usuarios remotos obteñan unha lista de\n"
"tódolos usuarios conectados a unha máquina que está a executar o\n"
"daemon rwho (similar ó finger)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Executa-lo sistema se son na súa máquina"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"O syslog é o método que usan moitos daemons para rexistrar mensaxes\n"
"nos diversos ficheiros de rexistro do sistema.  É unha boa idea executar\n"
"sempre o syslog."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Carga-los drivers para os dispositivos USB."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr ""
"Inicia o Servidor de Fontes X (isto é obrigatorio para poder executar Xorg)."

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"

#: services.pm:127 standalone/draksambashare:111
#, c-format
msgid "Printing"
msgstr "Imprimindo"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Internet"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr "Compartimento de ficheiros"

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr "Administración Remota"

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr "Servidor de Bases de Datos"

#: services.pm:209
#, c-format
msgid "running"
msgstr "executándose"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "parado"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr "Servicios e daemons"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Non hai información adicional\n"
"sobre este servicio, desculpe."

#: services.pm:224 ugtk2.pm:1009
#, c-format
msgid "Info"
msgstr "Info"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr "Iniciar cando sexa solicitado"

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "Ó arrincar"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Iniciar"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Parar"

#: share/advertising/01.pl:3
#, c-format
msgid "Mandriva Linux 2006: Packs"
msgstr "Mandriva Linux 2006: Packs"

#: share/advertising/02.pl:3
#, c-format
msgid "Mandriva Linux 2006: More features"
msgstr "Mandriva Linux 2006: Máis funcionalidades"

#: share/advertising/03.pl:3
#, c-format
msgid "Interactive firewall"
msgstr "Cortalumes interactivo"

#: share/advertising/04.pl:3
#, c-format
msgid "Desktop search"
msgstr ""

#: share/advertising/05.pl:3
#, c-format
msgid "New package manager"
msgstr "Novo xestor de paquetes"

#: share/advertising/06.pl:3
#, c-format
msgid "Mandriva Linux 2006: More performances"
msgstr "Mandriva Linux 2006: Máis resultados"

#: share/advertising/07.pl:3
#, c-format
msgid "Latest kernel and GCC"
msgstr "Último kernel e GCC"

#: share/advertising/08.pl:3
#, c-format
msgid "High Availibility"
msgstr "Alta dispoñibilidade"

#: share/advertising/09.pl:3
#, c-format
msgid "Delta RPM"
msgstr "Delta RPM"

#: share/advertising/10.pl:3
#, c-format
msgid "Low resources setup"
msgstr ""

#: share/advertising/11.pl:3
#, c-format
msgid "Boot time reduction"
msgstr "Reducción do tempo de arrinque"

#: share/advertising/12.pl:3
#, c-format
msgid "Mandriva Linux 2006: Easier to use"
msgstr "Mandriva Linux 2006: Máis fácil de usar"

#: share/advertising/13.pl:3
#, c-format
msgid "Latest graphical interfaces: KDE and GNOME"
msgstr "Últimas interfaces gráficas: KDE e GNOME"

#: share/advertising/14.pl:3
#, c-format
msgid "auto-installation servers"
msgstr ""

#: share/advertising/15.pl:3
#, c-format
msgid "Easy and quick installation"
msgstr "Instalación rápida e sinxela"

#: share/advertising/16.pl:3
#, c-format
msgid "Easy configuration thanks to 60 wizards"
msgstr "Configuración sinxela gracias a 60 asistentes"

#: share/advertising/17.pl:3
#, c-format
msgid "Look and feel improved"
msgstr "Aparencia mellorada"

#: share/advertising/18.pl:3
#, c-format
msgid "New webmin theme"
msgstr "Novo tema para Webmin"

#: share/advertising/19.pl:3
#, c-format
msgid "Mandriva Linux 2006: More support"
msgstr "Mandriva Linux 2006: Máis soporte"

#: share/advertising/20.pl:3
#, c-format
msgid "Better Hardware support"
msgstr "Mellor soporte de Hardware"

#: share/advertising/21.pl:3
#, c-format
msgid "Xen support"
msgstr "Soporte para Xen"

#: share/advertising/22.pl:3
#, c-format
msgid "Mandriva Linux 2006: More information"
msgstr "Mandriva Linux 2006: Máis información"

#: share/advertising/23.pl:3
#, c-format
msgid "Mandriva Linux 2006: Where to buy?"
msgstr "Mandriva Linux 2006: Onde compralo?"

#: share/advertising/24.pl:3
#, c-format
msgid "Where to find technical assistance?"
msgstr "Onde atopar asistencia técnica?"

#: share/advertising/25.pl:3
#, c-format
msgid "How to join the Mandriva Linux community?"
msgstr "Como unirse á comunidade de Mandriva Linux?"

#: share/advertising/26.pl:3
#, c-format
msgid "How to maintain your system up-to-date?"
msgstr "Como manter o seu sistema actualizado?"

#: share/advertising/intel.pl:3
#, c-format
msgid "Intel Software"
msgstr ""

#: share/advertising/skype.pl:3
#, c-format
msgid "Skype lets you make calls through the Internet for free."
msgstr ""

#: share/compssUsers.pl:26
#, c-format
msgid "Office Workstation"
msgstr "Estación de Traballo de Oficina"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"Programas de oficina: procesadores de texto (OpenOffice.org Writer, Kword), "
"follas de cálculo (OpenOffice.org Calc, Kspread), visualizadores de pdf, etc"

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Programas de oficina: procesadores de texto (kword, abiword), follas de "
"cálculo (kspread, gnumeric), visualizadores de pdf, etc"

#: share/compssUsers.pl:34
#, c-format
msgid "Game station"
msgstr "Estación de xogos"

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Programas de diversión: arcade, taboleiros, estratexia, etc"

#: share/compssUsers.pl:38
#, c-format
msgid "Multimedia station"
msgstr "Estación multimedia"

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "Programas de reproducción e edición de son e vídeo"

#: share/compssUsers.pl:44
#, c-format
msgid "Internet station"
msgstr "Estación de Internet"

#: share/compssUsers.pl:45
#, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Conxunto de ferramentas para ler e enviar correo-e e novas (mutt, tin...) e "
"para navegar pola Web"

#: share/compssUsers.pl:50
#, c-format
msgid "Network Computer (client)"
msgstr "Ordenador de Rede (cliente)"

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "Clientes para diferentes protocolos incluindo ssh"

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "Configuración"

#: share/compssUsers.pl:56
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "Ferramentas para facilita-la configuración do ordenador"

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr "Ferramentas da Consola"

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "Editores, shells, ferramentas de ficheiro, terminais"

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr ""
"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "Documentación"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "Libros e Howtos sobre Linux e o Software Libre"

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "Linux Standard Base. Soporte de aplicacións de terceiros"

#: share/compssUsers.pl:86
#, c-format
msgid "Apache"
msgstr "Apache"

#: share/compssUsers.pl:89
#, c-format
msgid "Groupware"
msgstr "Groupware"

#: share/compssUsers.pl:90
#, c-format
msgid "Kolab Server"
msgstr "Servidor Kolab"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Firewall/Router"
msgstr "Cortalumes/Encamiñador"

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, c-format
msgid "Internet gateway"
msgstr "Pasarela de Internet"

#: share/compssUsers.pl:97
#, c-format
msgid "Mail/News"
msgstr "Correo/Novas"

#: share/compssUsers.pl:98
#, c-format
msgid "Postfix mail server, Inn news server"
msgstr "Servidor de correo Postfix, servidor de novas Inn"

#: share/compssUsers.pl:101
#, c-format
msgid "Directory Server"
msgstr "Servidor de Directorio"

#: share/compssUsers.pl:105
#, c-format
msgid "FTP Server"
msgstr "Servidor FTP"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr "ProFTPd"

#: share/compssUsers.pl:109
#, c-format
msgid "DNS/NIS"
msgstr "DNS/NIS"

#: share/compssUsers.pl:110
#, fuzzy, c-format
msgid "Domain Name and Network Information Server"
msgstr "Nome do Servidor do Dominio"

#: share/compssUsers.pl:113
#, c-format
msgid "File and Printer Sharing Server"
msgstr "Servidor de Compartimento de Impresoras e Ficheiros"

#: share/compssUsers.pl:114
#, c-format
msgid "NFS Server, Samba server"
msgstr "Servidor NFS, servidor Samba"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "Bases de datos"

#: share/compssUsers.pl:118
#, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "Servidores de bases de datos PostgreSQL e MySQL"

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "Correo-e"

#: share/compssUsers.pl:127
#, c-format
msgid "Postfix mail server"
msgstr "Servidor de correo Postfix"

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "Servidores de bases de datos PostgreSQL ou MySQL"

#: share/compssUsers.pl:138
#, c-format
msgid "Network Computer server"
msgstr "Servidor de Redes de Ordenadores"

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "Servidor NFS, servidor SMB, servidor Proxy, servidor ssh"

#: share/compssUsers.pl:147
#, c-format
msgid "KDE Workstation"
msgstr "Estación de Traballo KDE"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"O Ambiente de Escritorio KDE, o ambiente gráfico básico cunha colección de "
"ferramentas que o acompañan"

#: share/compssUsers.pl:152
#, c-format
msgid "GNOME Workstation"
msgstr "Estación de Traballo Gnome"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Un ambiente gráfico cun conxunto de aplicacións amigables e ferramentas de "
"escritorio"

#: share/compssUsers.pl:156
#, c-format
msgid "IceWm Desktop"
msgstr "Escritorio IceWm"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "Outros Escritorios Gráficos"

#: share/compssUsers.pl:161
#, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr "Window Maker, Enlightenment, Fvwm, etc"

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr "Utilidades"

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
#, c-format
msgid "SSH Server"
msgstr "Servidor SSH"

#: share/compssUsers.pl:191
#, c-format
msgid "Webmin"
msgstr "Webmin"

#: share/compssUsers.pl:192
#, c-format
msgid "Webmin Remote Configuration Server"
msgstr "Servidor de Configuración Remota Webmin"

#: share/compssUsers.pl:196
#, c-format
msgid "Network Utilities/Monitoring"
msgstr "Monitorización/Utilidades de Rede"

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:201
#, c-format
msgid "Mandriva Wizards"
msgstr "Asistentes de Mandriva"

#: share/compssUsers.pl:202
#, c-format
msgid "Wizards to configure server"
msgstr "Asistentes para configurar o servidor"

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""
"[--add]\n"
"  --add             - asistente \"engadir unha interface de rede\"\n"
"  --del             - asistente \"eliminar unha interface de rede\"\n"
"  --skip-wizard     - administrar as conexións\n"
"  --internet        - configurar Internet\n"
"  --wizard          - coma --add"

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[teclado]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:146
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Uso: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] "
"[-v|--version] "

#: standalone/XFdrake:59
#, c-format
msgid "You need to reboot for changes to take effect"
msgstr "Cómpre reiniciar o equipo para que os cambios se teñan en conta"

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Saia da sesión e use Ctrl-Alt-Retroceso"

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""
"Cómpre que saia do sistema e volva entrar para que os cambios teñan efecto"

#: standalone/drakTermServ:102 standalone/drakTermServ:108
#, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: %s require un nome de usuario...\n"

#: standalone/drakTermServ:119
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:125
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:207 standalone/drakTermServ:210
#, c-format
msgid "Terminal Server Configuration"
msgstr "Configuración de Terminal Server"

#: standalone/drakTermServ:216
#, fuzzy, c-format
msgid "dhcpd Config"
msgstr "Configurando..."

#: standalone/drakTermServ:220
#, c-format
msgid "Enable Server"
msgstr "Activar Servidor"

#: standalone/drakTermServ:226
#, c-format
msgid "Disable Server"
msgstr "Desactivar Servidor"

#: standalone/drakTermServ:232
#, c-format
msgid "Start Server"
msgstr "Inicia-lo Servidor"

#: standalone/drakTermServ:238
#, c-format
msgid "Stop Server"
msgstr "Para-lo Servidor"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr "Imaxes de Arrinque dende Rede"

#: standalone/drakTermServ:258
#, c-format
msgid "Add/Del Users"
msgstr "Engadir/Eliminar Usuarios"

#: standalone/drakTermServ:262
#, c-format
msgid "Add/Del Clients"
msgstr "Engadir/Eliminar Clientes"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "Imaxes"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr "Clientes/Usuarios"

#: standalone/drakTermServ:289 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "Asistente da Primeira Vez"

#: standalone/drakTermServ:326 standalone/drakTermServ:327
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:333
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:379
#, c-format
msgid "Cancel Wizard"
msgstr "Saír do Asistente"

#: standalone/drakTermServ:394
#, c-format
msgid "Please save dhcpd config!"
msgstr "Garde a configuración de dhcpd!"

#: standalone/drakTermServ:422
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "Cliente DHCP"

#: standalone/drakTermServ:424
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:426
#, c-format
msgid ""
"Please select default client type (Fat is the default type if 'Use thin' is "
"unchecked).\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:446
#, c-format
msgid "Creating net boot images for all kernels"
msgstr "Creando imaxes de arrinque dende rede para tódolos kernels"

#: standalone/drakTermServ:447 standalone/drakTermServ:769
#: standalone/drakTermServ:785
#, c-format
msgid "This will take a few minutes."
msgstr "Isto pode levar uns minutos."

#: standalone/drakTermServ:453 standalone/drakTermServ:493
#, c-format
msgid "Done!"
msgstr "¡Feito!"

#: standalone/drakTermServ:464 standalone/drakTermServ:849
#, c-format
msgid "%s failed"
msgstr "%s fallou"

#: standalone/drakTermServ:473
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""
"Non hai espacio dabondo para\n"
"crear NBIs en %s.\n"
"Necesario: %d MB, Libre: %d MB"

#: standalone/drakTermServ:479
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""
"Sincronizando a lista de usuarios do servidor ca lista do cliente, incluindo "
"a root."

#: standalone/drakTermServ:499
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:534
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Configuración de Internet"

#: standalone/drakTermServ:535
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:541
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:559
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:579
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:591
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:595
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:600
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:609
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:630
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:663
#, c-format
msgid "Boot Floppy"
msgstr "Disquete de Arrinque"

#: standalone/drakTermServ:665
#, c-format
msgid "Boot ISO"
msgstr "ISO de Arrinque"

#: standalone/drakTermServ:667
#, c-format
msgid "PXE Image"
msgstr "Imaxe PXE"

#: standalone/drakTermServ:728
#, c-format
msgid "Default kernel version"
msgstr "Versión por defecto do kernel"

#: standalone/drakTermServ:731
#, c-format
msgid "Create PXE images."
msgstr "Crear imaxes PXE."

#: standalone/drakTermServ:757
#, c-format
msgid "Install i586 kernel for older clients"
msgstr "Instalar un kernel i586 para clientes antigos"

#: standalone/drakTermServ:767
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Construir o Kernel Enteiro -->"

#: standalone/drakTermServ:774
#, c-format
msgid "No kernel selected!"
msgstr "¡Non hai ningún kernel seleccionado!"

#: standalone/drakTermServ:777
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:781 standalone/drakTermServ:1581
#, c-format
msgid "No NIC selected!"
msgstr "¡Non hai ningún NIC seleccionado!"

#: standalone/drakTermServ:784
#, c-format
msgid "Build All Kernels -->"
msgstr "Construir Tódolos Kernels -->"

#: standalone/drakTermServ:797
#, c-format
msgid "<-- Delete"
msgstr "<-- Borrar"

#: standalone/drakTermServ:802
#, c-format
msgid "No image selected!"
msgstr "Non hai ningunha imaxe seleccionada!"

#: standalone/drakTermServ:805
#, c-format
msgid "Delete All NBIs"
msgstr "Eliminar Tódolos NBIs"

#: standalone/drakTermServ:880
#, c-format
msgid "Building images for kernel:"
msgstr "Construindo imaxes para o kernel:"

#: standalone/drakTermServ:1004
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:1009
#, c-format
msgid "Add User -->"
msgstr "Engadir Usuario -->"

#: standalone/drakTermServ:1015
#, c-format
msgid "<-- Del User"
msgstr "<-- Eliminar Usuario"

#: standalone/drakTermServ:1051
#, c-format
msgid "type: %s"
msgstr "tipo: %s"

#: standalone/drakTermServ:1055
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:1086
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr ""
"Permiti-la configuración\n"
"do hardware local."

#: standalone/drakTermServ:1095
#, c-format
msgid "No net boot images created!"
msgstr "Non se crearon imaxes de arrinque dende rede!"

#: standalone/drakTermServ:1114
#, fuzzy, c-format
msgid "Thin Client"
msgstr "Cliente DHCP"

#: standalone/drakTermServ:1118
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "Cliente DHCP"

#: standalone/drakTermServ:1119
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1120
#, c-format
msgid "Add Client -->"
msgstr "Engadir Cliente -->"

#: standalone/drakTermServ:1134
#, fuzzy, c-format
msgid "type: fat"
msgstr "Tipo: "

#: standalone/drakTermServ:1135
#, fuzzy, c-format
msgid "type: thin"
msgstr "Tipo: "

#: standalone/drakTermServ:1142
#, fuzzy, c-format
msgid "local config: false"
msgstr "Impresora local"

#: standalone/drakTermServ:1143
#, fuzzy, c-format
msgid "local config: true"
msgstr "reconfigurar"

#: standalone/drakTermServ:1151
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Editar Cliente"

#: standalone/drakTermServ:1176
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1183
#, c-format
msgid "Delete Client"
msgstr "Borrar Cliente"

#: standalone/drakTermServ:1205
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1250
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1266
#, c-format
msgid "All clients will use %s"
msgstr "Tódolos clientes usarán %s"

#: standalone/drakTermServ:1300
#, c-format
msgid "Subnet:"
msgstr "Subrede:"

#: standalone/drakTermServ:1307
#, c-format
msgid "Netmask:"
msgstr "Máscara de Rede:"

#: standalone/drakTermServ:1314
#, c-format
msgid "Routers:"
msgstr "Encamiñadores:"

#: standalone/drakTermServ:1321
#, c-format
msgid "Subnet Mask:"
msgstr "Máscara de Subrede:"

#: standalone/drakTermServ:1328
#, c-format
msgid "Broadcast Address:"
msgstr "Enderezo de Broadcast:"

#: standalone/drakTermServ:1335
#, c-format
msgid "Domain Name:"
msgstr "Nome do Dominio:"

#: standalone/drakTermServ:1343
#, c-format
msgid "Name Servers:"
msgstr "Nomes dos Servidores:"

#: standalone/drakTermServ:1354
#, c-format
msgid "IP Range Start:"
msgstr "Comezo do Rango de IP:"

#: standalone/drakTermServ:1355
#, c-format
msgid "IP Range End:"
msgstr "Remate do Rango de IP:"

#: standalone/drakTermServ:1397
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1399
#, fuzzy, c-format
msgid "Write Config"
msgstr "reconfigurar"

#: standalone/drakTermServ:1415
#, c-format
msgid "dhcpd Server Configuration"
msgstr "Configuración do Servidor dhcpd"

#: standalone/drakTermServ:1416
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"A maioría destes valores foron\n"
"extraidos do sistema actual.\n"
"Pode modificalos se é necesario."

#: standalone/drakTermServ:1419
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""

#: standalone/drakTermServ:1572
#, c-format
msgid "Write to %s failed!"
msgstr "Fallo ó escribir en %s!"

#: standalone/drakTermServ:1585
#, c-format
msgid "Please insert floppy disk:"
msgstr "Insira un disquete na unidade:"

#: standalone/drakTermServ:1589
#, c-format
msgid "Could not access the floppy!"
msgstr "¡Non se puido acceder ó disquete!"

#: standalone/drakTermServ:1591
#, c-format
msgid "Floppy can be removed now"
msgstr "Xa pode extrae-lo disquete"

#: standalone/drakTermServ:1594
#, c-format
msgid "No floppy drive available!"
msgstr "¡Non hai ningunha disqueteira dispoñible!"

#: standalone/drakTermServ:1600
#, c-format
msgid "PXE image is %s/%s"
msgstr "A imaxe PXE é %s/%s"

#: standalone/drakTermServ:1602
#, c-format
msgid "Error writing %s/%s"
msgstr "Erro escribindo %s/%s"

#: standalone/drakTermServ:1614
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1618
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Algo foi mal! - Está mkisofs instalado?"

#: standalone/drakTermServ:1638
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "¡Cómpre crear primeiro /etc/dhcpd.conf!"

#: standalone/drakTermServ:1797
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1810
#, c-format
msgid "%s is not a user..\n"
msgstr "%s non é un usuario..\n"

#: standalone/drakTermServ:1811
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr "%s xa é un usuario de Terminal Server\n"

#: standalone/drakTermServ:1813
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1815
#, c-format
msgid "%s added to Terminal Server\n"
msgstr "%s engadido a Terminal Server\n"

#: standalone/drakTermServ:1832
#, c-format
msgid "Deleted %s...\n"
msgstr "Eliminado %s...\n"

#: standalone/drakTermServ:1834 standalone/drakTermServ:1907
#, c-format
msgid "%s not found...\n"
msgstr "%s non atopado...\n"

#: standalone/drakTermServ:1935
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow e /etc/hosts.deny xa configurados - sen cambios"

#: standalone/drakTermServ:2075
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "A configuración cambiou - reiniciar clusternfs/dhcpd?"

#: standalone/drakautoinst:38 standalone/drakhosts:123
#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
#: standalone/draknfs:546 standalone/draksambashare:187
#: standalone/draksambashare:208 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Error!"
msgstr "¡Erro!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr "Non se pode atopa-lo ficheiro de imaxe `%s'."

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "Configurador da Instalación Automática"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""

#: standalone/drakautoinst:60
#, fuzzy, c-format
msgid "replay"
msgstr "Reproducir"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "manual"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Configuración dos Pasos Automáticos"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Elixa en cada paso se se debe reproducir coma na súa instalación, ou se debe "
"ser manual"

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "Creando un disquete de instalación automática"

#: standalone/drakautoinst:90
#, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Insira outro disquete baleiro na unidade %s (disco para os drivers)"

#: standalone/drakautoinst:91
#, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Creando un disquete de instalación automática (disco dos drivers)"

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"O disquete xerouse con éxito.\n"
"Agora poderá reproducir a instalación."

#: standalone/drakautoinst:287
#, c-format
msgid "Auto Install"
msgstr "Instalación Automática"

#: standalone/drakautoinst:356
#, c-format
msgid "Add an item"
msgstr "Engadir un elemento"

#: standalone/drakautoinst:363
#, c-format
msgid "Remove the last item"
msgstr "Elimina-lo último elemento"

#: standalone/drakbackup:156
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""
"Expect é unha extensión da linguaxe de script TCL que permite sesións "
"interactivas sen a intervención do usuario."

#: standalone/drakbackup:157
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "Almacena-lo contrasinal deste sistema na configuración de drakbackup."

#: standalone/drakbackup:158
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""
"Esta opción gardará os ficheiros que cambiaron.  O comportamento exacto "
"depende de se se usa o modo incremental ou diferencial."

#: standalone/drakbackup:160
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""
"As copias de seguridade incrementais só gardan os ficheiros novos ou que "
"cambiaron dende a última copia de seguridade."

#: standalone/drakbackup:161
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""
"As copias de seguridade diferenciais só gardan os ficheiros novos ou que "
"cambiaron dende a copia de seguridade 'base' orixinal."

#: standalone/drakbackup:162
#, c-format
msgid ""
"Star should be selected if you want to backup EA or ACLs, otherwise choose "
"tar"
msgstr ""

#: standalone/drakbackup:163
#, fuzzy, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server. Multiple "
"users can be in a comma seperated list"
msgstr ""
"Debe especificar un nome dun usuario local ou un enderezo de correo-e ó que "
"enviarlle os resultados da copia de seguridade. Cómpre especificar un "
"servidor de correo-e."

#: standalone/drakbackup:164
#, fuzzy, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""
"Debe especificar un nome dun usuario local ou un enderezo de correo-e ó que "
"enviarlle os resultados da copia de seguridade. Cómpre especificar un "
"servidor de correo-e."

#: standalone/drakbackup:165
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:166
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""
"Para garda-las copias de seguridade noutros soportes, os ficheiros creanse "
"no disco duro e despois móvense a outros soportes.  Se activa esta opción os "
"ficheiros tar do disco duro eliminaranse despois de face-la copia de "
"seguridade."

#: standalone/drakbackup:167
#, c-format
msgid ""
"Selecting this option allows you to view the raw output from the restore "
"process, after a file restore."
msgstr ""

#: standalone/drakbackup:168
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:169
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""
"Personalizado permítelle especifica-lo seu propio día e hora.  As outras "
"opcións usan run-parts en /etc/crontab."

#: standalone/drakbackup:343
#, c-format
msgid "No media selected for cron operation."
msgstr "Non seleccionou ningún soporte para a operación de cron."

#: standalone/drakbackup:347
#, c-format
msgid "No interval selected for cron operation."
msgstr "Non seleccionou ningún intervalo para a operación de cron."

#: standalone/drakbackup:393
#, c-format
msgid "Interval cron not available as non-root"
msgstr "O intervalo de cron non estará dispoñible se non é root"

#: standalone/drakbackup:477 standalone/logdrake:440
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr "¡\"%s\" non é un nome de usuario local ou enderezo de correo-e válido!"

#: standalone/drakbackup:481 standalone/logdrake:445
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""
"¡\"%s\" é un usuario local, pero non seleccionou un SMTP local, asi que debe "
"usar un enderezo de correo-e completo!"

#: standalone/drakbackup:491
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""
"A lista de usuario válidos cambiou, rescribindo o ficheiro de configuración."

#: standalone/drakbackup:493
#, c-format
msgid "Old user list:\n"
msgstr "Lista de usuarios antiga:\n"

#: standalone/drakbackup:495
#, c-format
msgid "New user list:\n"
msgstr "Lista de usuario nova:\n"

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      Informe de DrakBackup\n"

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      Informe do Daemon de DrakBackup\n"

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    Detalles do Informe de DrakBackup\n"
"\n"
"\n"

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr "Progreso total"

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Vai levar un cacho xerar as claves."

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "Adaptador %s: %s"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:643
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "Sen contrasinal"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Denegouse o permiso ó transferir %s a %s"

#: standalone/drakbackup:645
#, c-format
msgid "Can not find %s on %s"
msgstr "Non se puido atopar %s en %s"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr "%s non responde"

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:703
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "¡Non hai ningún CD-R/DVD-R na unidade!"

#: standalone/drakbackup:707
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "¡Semella que non é un soporte gravable!"

#: standalone/drakbackup:712
#, c-format
msgid "Not erasable media!"
msgstr "¡Non é un soporte borrable!"

#: standalone/drakbackup:754
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Borra-lo soporte pode levar un cacho."

#: standalone/drakbackup:812
#, c-format
msgid "Permission problem accessing CD."
msgstr "Problema cos permisos ó acceder ó CD."

#: standalone/drakbackup:839
#, c-format
msgid "No tape in %s!"
msgstr "¡Non hai cinta en %s!"

#: standalone/drakbackup:948
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:968 standalone/drakbackup:1000
#, c-format
msgid "Backup system files..."
msgstr "Facendo Copia de Seguridade dos ficheiros do sistema..."

#: standalone/drakbackup:1001 standalone/drakbackup:1040
#, c-format
msgid "Hard Disk Backup files..."
msgstr "Ficheiros de Copia de Seguridade do Disco Duro..."

#: standalone/drakbackup:1039
#, c-format
msgid "Backup User files..."
msgstr "Facendo Copia de Seguridade dos ficheiros de usuario..."

#: standalone/drakbackup:1073
#, c-format
msgid "Backup Other files..."
msgstr "Facendo Copia de Seguridade doutros ficheiros..."

#: standalone/drakbackup:1074
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Progreso da Copia de Seguridade do Disco Duro..."

#: standalone/drakbackup:1079
#, c-format
msgid "No changes to backup!"
msgstr "¡Non hai cambios dos que facer copia de seguridade!"

#: standalone/drakbackup:1095 standalone/drakbackup:1117
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1104
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Problema ca conexión FTP: Non foi posible envia-los ficheiros por FTP.\n"

#: standalone/drakbackup:1105
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""
"Erro mentres se enviaba o ficheiro por FTP. Corrixa a configuración de FTP."

#: standalone/drakbackup:1107
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr "enviouse a lista de ficheiros por FTP: %s\n"

#: standalone/drakbackup:1122
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1127
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1136
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr "Erro ó envia-lo correo-e. A mensaxe do informe non se enviou."

#: standalone/drakbackup:1137
#, c-format
msgid " Error while sending mail. \n"
msgstr " Erro mentres se enviaba o correo-e.\n"

#: standalone/drakbackup:1167
#, c-format
msgid "Can not create catalog!"
msgstr "¡Non se puido crea-lo catálogo!"

#: standalone/drakbackup:1321
#, fuzzy, c-format
msgid "Problem installing %s"
msgstr "Problemas ó instala-lo paquete %s"

#: standalone/drakbackup:1409
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr ""
"Facer unha Copia de Seguridade dos ficheiros do Sistema. (directorio /etc)"

#: standalone/drakbackup:1410 standalone/drakbackup:1473
#: standalone/drakbackup:1539
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""
"Usar Copias de Seguridade Incrementais/Diferenciais  (non rempraza-las "
"copias de seguridade antigas)"

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Incremental Backups"
msgstr "Usar Copias de Seguridade Incrementais"

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Differential Backups"
msgstr "Usar Copias de Seguridade Diferenciais"

#: standalone/drakbackup:1414
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Non incluir ficheiros críticos (passwd, group, fstab)"

#: standalone/drakbackup:1445
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "Escolla tódolos usuarios que desexa incluir na copia de seguridade."

#: standalone/drakbackup:1472
#, c-format
msgid "Do not include the browser cache"
msgstr "Non inclui-la caché do navegador"

#: standalone/drakbackup:1526
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Seleccione os ficheiros e os directorios e despois prema en 'Aceptar'"

#: standalone/drakbackup:1527 standalone/drakfont:658
#, c-format
msgid "Remove Selected"
msgstr "Elimina-los Seleccionados"

#: standalone/drakbackup:1590
#, c-format
msgid "Users"
msgstr "Usuarios"

#: standalone/drakbackup:1610
#, c-format
msgid "Use network connection to backup"
msgstr "Usar unha conexión de rede para face-la copia de seguridade"

#: standalone/drakbackup:1612
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1616
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1617
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1619
#, c-format
msgid "Transfer Now"
msgstr "Transferir Agora"

#: standalone/drakbackup:1621
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1624
#, c-format
msgid "Host name or IP."
msgstr "Nome de máquina ou IP."

#: standalone/drakbackup:1629
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1641
#, c-format
msgid "Remember this password"
msgstr "Recorde este contrasinal"

#: standalone/drakbackup:1653
#, c-format
msgid "Need hostname, username and password!"
msgstr "Necesítase un nome de máquina, un nome de usuario e un contrasinal!"

#: standalone/drakbackup:1744
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Usar CD-R/DVD-R para face-la copia de seguridade"

#: standalone/drakbackup:1747
#, c-format
msgid "Choose your CD/DVD device"
msgstr "Escolla o seu dispositivo de CD/DVD"

#: standalone/drakbackup:1752
#, c-format
msgid "Choose your CD/DVD media size"
msgstr "Escolla o tamaño do soporte CD/DVD"

#: standalone/drakbackup:1759
#, c-format
msgid "Multisession CD"
msgstr "CD Multisesión"

#: standalone/drakbackup:1761
#, c-format
msgid "CDRW media"
msgstr "Soporte CDRW"

#: standalone/drakbackup:1767
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Borra-lo seu soporte RW (1ª Sesión)"

#: standalone/drakbackup:1768
#, c-format
msgid " Erase Now "
msgstr " Borrar Agora "

#: standalone/drakbackup:1774
#, c-format
msgid "DVD+RW media"
msgstr "Soporte DVD+RW"

#: standalone/drakbackup:1776
#, c-format
msgid "DVD-R media"
msgstr "Soporte DVD-R"

#: standalone/drakbackup:1778
#, c-format
msgid "DVDRAM device"
msgstr "Dispositivo DVDRAM"

#: standalone/drakbackup:1809
#, c-format
msgid "No CD device defined!"
msgstr "¡Non hai ningún dispositivo de CD definido!"

#: standalone/drakbackup:1851
#, c-format
msgid "Use tape to backup"
msgstr "Usar cinta para face-la copia de seguridade"

#: standalone/drakbackup:1854
#, c-format
msgid "Device name to use for backup"
msgstr "Nome do dispositivo que se usará para face-la copia de seguridade"

#: standalone/drakbackup:1860
#, c-format
msgid "Backup directly to tape"
msgstr "Gardar a copia de seguridade directamente na cinta"

#: standalone/drakbackup:1866
#, c-format
msgid "Use tape hardware compression (EXPERIMENTAL)"
msgstr ""

#: standalone/drakbackup:1872
#, c-format
msgid "Do not rewind tape after backup"
msgstr "Non rebobine a cinta despois de face-la copia de seguridade"

#: standalone/drakbackup:1878
#, c-format
msgid "Erase tape before backup"
msgstr "Borra-la cinta antes de face-la copia de seguridade"

#: standalone/drakbackup:1884
#, c-format
msgid "Eject tape after the backup"
msgstr "Expulsa-la cinta despois de face-la copia de seguridade"

#: standalone/drakbackup:1965
#, c-format
msgid "Enter the directory to save to:"
msgstr "Introduza un directorio no que gardar:"

#: standalone/drakbackup:1969
#, c-format
msgid "Directory to save to"
msgstr "Directorio no que gardar"

#: standalone/drakbackup:1974
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""

#: standalone/drakbackup:1978
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""

#: standalone/drakbackup:2045
#, c-format
msgid "CD-R / DVD-R"
msgstr "CD-R / DVD-R"

#: standalone/drakbackup:2050
#, c-format
msgid "HardDrive / NFS"
msgstr "Disco Duro / NFS"

#: standalone/drakbackup:2065 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "hourly"
msgstr "cada hora"

#: standalone/drakbackup:2065 standalone/drakbackup:2067
#: standalone/drakbackup:2072
#, c-format
msgid "daily"
msgstr "diariamente"

#: standalone/drakbackup:2065 standalone/drakbackup:2068
#: standalone/drakbackup:2073
#, c-format
msgid "weekly"
msgstr "semanalmente"

#: standalone/drakbackup:2065 standalone/drakbackup:2069
#: standalone/drakbackup:2074
#, c-format
msgid "monthly"
msgstr "mensualmente"

#: standalone/drakbackup:2065 standalone/drakbackup:2070
#: standalone/drakbackup:2075
#, c-format
msgid "custom"
msgstr "personalizado"

#: standalone/drakbackup:2079
#, c-format
msgid "January"
msgstr "Xaneiro"

#: standalone/drakbackup:2079
#, c-format
msgid "February"
msgstr "Febreiro"

#: standalone/drakbackup:2079
#, c-format
msgid "March"
msgstr "Marzo"

#: standalone/drakbackup:2080
#, c-format
msgid "April"
msgstr "Abril"

#: standalone/drakbackup:2080
#, c-format
msgid "May"
msgstr "Maio"

#: standalone/drakbackup:2080
#, c-format
msgid "June"
msgstr "Xuño"

#: standalone/drakbackup:2080
#, c-format
msgid "July"
msgstr "Xullo"

#: standalone/drakbackup:2080
#, c-format
msgid "August"
msgstr "Agosto"

#: standalone/drakbackup:2080
#, c-format
msgid "September"
msgstr "Setembro"

#: standalone/drakbackup:2081
#, c-format
msgid "October"
msgstr "Outubro"

#: standalone/drakbackup:2081
#, c-format
msgid "November"
msgstr "Novembro"

#: standalone/drakbackup:2081
#, c-format
msgid "December"
msgstr "Decembro"

#: standalone/drakbackup:2084
#, c-format
msgid "Sunday"
msgstr "Domingo"

#: standalone/drakbackup:2084
#, c-format
msgid "Monday"
msgstr "Luns"

#: standalone/drakbackup:2084
#, c-format
msgid "Tuesday"
msgstr "Martes"

#: standalone/drakbackup:2085
#, c-format
msgid "Wednesday"
msgstr "Mércores"

#: standalone/drakbackup:2085
#, c-format
msgid "Thursday"
msgstr "Xoves"

#: standalone/drakbackup:2085
#, c-format
msgid "Friday"
msgstr "Venres"

#: standalone/drakbackup:2085
#, c-format
msgid "Saturday"
msgstr "Sábado"

#: standalone/drakbackup:2115
#, fuzzy, c-format
msgid "Delete cron entry"
msgstr "Borrar Cliente"

#: standalone/drakbackup:2116
#, fuzzy, c-format
msgid "Add cron entry"
msgstr "Engadir unha Impresora"

#: standalone/drakbackup:2174
#, c-format
msgid "Use daemon"
msgstr "Usar daemon"

#: standalone/drakbackup:2178
#, c-format
msgid "Please choose the time interval between each backup"
msgstr "Escolla o intervalo de tempo entre cada copia de seguridade"

#: standalone/drakbackup:2186
#, c-format
msgid "Minute"
msgstr "Minuto"

#: standalone/drakbackup:2190
#, c-format
msgid "Hour"
msgstr "Hora"

#: standalone/drakbackup:2194
#, c-format
msgid "Day"
msgstr "Día"

#: standalone/drakbackup:2198
#, c-format
msgid "Month"
msgstr "Mes"

#: standalone/drakbackup:2202
#, fuzzy, c-format
msgid "Weekday (start)"
msgstr "Día da semana"

#: standalone/drakbackup:2206
#, fuzzy, c-format
msgid "Weekday (end)"
msgstr "Día da semana"

#: standalone/drakbackup:2210
#, fuzzy, c-format
msgid "Profile"
msgstr "Perfís"

#: standalone/drakbackup:2216
#, fuzzy, c-format
msgid "Current crontab:"
msgstr "Usuario actual"

#: standalone/drakbackup:2224
#, c-format
msgid "Please choose the media for backup."
msgstr "Escolla o soporte no que gardar a copia de seguridade."

#: standalone/drakbackup:2228
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "Asegúrese de que o daemon cron está incluido no seus servicios."

#: standalone/drakbackup:2229
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "Please choose the archive program"
msgstr "Escolla unha data para restaurar:"

#: standalone/drakbackup:2298
#, c-format
msgid "Please choose the compression type"
msgstr "Escolla o tipo de compresión"

#: standalone/drakbackup:2302
#, c-format
msgid "Use .backupignore files"
msgstr "Usar ficheiros .backupignore"

#: standalone/drakbackup:2304
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Enviar un informe por correo-e despois de cada copia de seguridade a:"

#: standalone/drakbackup:2310
#, c-format
msgid "Return address for sent mail:"
msgstr ""

#: standalone/drakbackup:2316
#, c-format
msgid "SMTP server for mail:"
msgstr "Servidor SMTP para o correo-e:"

#: standalone/drakbackup:2320
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
"Elimina-los ficheiros tar do Disco Duro despois de garda-la copia de "
"seguridade noutro soporte."

#: standalone/drakbackup:2321
#, fuzzy, c-format
msgid "View restore log after file restore."
msgstr "Aceptar para restaurar os outros ficheiros."

#: standalone/drakbackup:2366
#, c-format
msgid "What"
msgstr "Qué"

#: standalone/drakbackup:2371
#, c-format
msgid "Where"
msgstr "Onde"

#: standalone/drakbackup:2376
#, c-format
msgid "When"
msgstr "Cando"

#: standalone/drakbackup:2381
#, c-format
msgid "More Options"
msgstr "Máis Opcións"

#: standalone/drakbackup:2394
#, c-format
msgid "Backup destination not configured..."
msgstr "O destino da copia de seguridade non está configurado..."

#: standalone/drakbackup:2414 standalone/drakbackup:4339
#, c-format
msgid "Drakbackup Configuration"
msgstr "Configuración de Drakbackup"

#: standalone/drakbackup:2430
#, c-format
msgid "Please choose where you want to backup"
msgstr "Escolla onde quere poñe-la copia de seguridade"

#: standalone/drakbackup:2433
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""
"O Disco Duro úsase para prepara-las copias de seguridade para tódolos "
"soportes"

#: standalone/drakbackup:2433
#, c-format
msgid "Across Network"
msgstr ""

#: standalone/drakbackup:2433
#, c-format
msgid "On CD-R"
msgstr "Nun CD-R"

#: standalone/drakbackup:2433
#, c-format
msgid "On Tape Device"
msgstr "Nun Dispositivo de Cinta"

#: standalone/drakbackup:2479
#, c-format
msgid "Backup Users"
msgstr "Usuarios de Copias de Seguridade"

#: standalone/drakbackup:2480
#, c-format
msgid " (Default is all users)"
msgstr " (Por omisión son tódolos usuarios)"

#: standalone/drakbackup:2493
#, c-format
msgid "Please choose what you want to backup"
msgstr "Escolla de qué quere face-la copia de seguridade"

#: standalone/drakbackup:2494
#, c-format
msgid "Backup System"
msgstr "Sistema de Copia de Seguridade"

#: standalone/drakbackup:2496
#, c-format
msgid "Select user manually"
msgstr "Seleccionar usuario a man"

#: standalone/drakbackup:2525
#, c-format
msgid "Please select data to backup..."
msgstr "Seleccione os datos dos que desexa facer copia de seguridade..."

#: standalone/drakbackup:2597
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2598
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Ficheiros do Sistema:\n"

#: standalone/drakbackup:2600
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Ficheiros de Usuario:\n"

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Outros Ficheiros:\n"

#: standalone/drakbackup:2604
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Gardar no Disco Duro na ruta: %s\n"

#: standalone/drakbackup:2605
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\tLimita-lo uso do disco a %s MB\n"

#: standalone/drakbackup:2606
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr "\tEliminar as copias de seguridade de hai máis de %s día(s)\n"

#: standalone/drakbackup:2609
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Elimina-los ficheiros tar do disco duro despois de face-la copia de "
"seguridade.\n"

#: standalone/drakbackup:2614
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Gravar nun CD"

#: standalone/drakbackup:2615
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2616
#, c-format
msgid " on device: %s"
msgstr " no dispositivo: %s"

#: standalone/drakbackup:2617
#, c-format
msgid " (multi-session)"
msgstr " (multisesión)"

#: standalone/drakbackup:2618
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Gardar nunha Cinta no dispositivo: %s"

#: standalone/drakbackup:2619
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tBorrar=%s"

#: standalone/drakbackup:2621
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr "\tGardar a copia de seguridade directamente na cinta\n"

#: standalone/drakbackup:2623
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2624
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2625
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Opcións:\n"

#: standalone/drakbackup:2626
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tNon inclui-los Ficheiros do Sistema\n"

#: standalone/drakbackup:2628
#, fuzzy, c-format
msgid "\tBackups use %s and bzip2\n"
msgstr "\tAs copias de seguridade usan tar e bzip2\n"

#: standalone/drakbackup:2629
#, fuzzy, c-format
msgid "\tBackups use %s and gzip\n"
msgstr "\tAs copias de seguridade usan tar e gzip\n"

#: standalone/drakbackup:2630
#, fuzzy, c-format
msgid "\tBackups use %s only\n"
msgstr "\tAs copias de seguridade só usan tar\n"

#: standalone/drakbackup:2632
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tUsar ficheiros .backupignore\n"

#: standalone/drakbackup:2633
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\tEnviar unha mensaxe a %s\n"

#: standalone/drakbackup:2634
#, c-format
msgid "\tSend mail from %s\n"
msgstr ""

#: standalone/drakbackup:2635
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "\tUsando o servidor SMTP %s\n"

#: standalone/drakbackup:2637
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2638
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Disco duro.\n"

#: standalone/drakbackup:2639
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-CD-R.\n"

#: standalone/drakbackup:2640
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Cinta \n"

#: standalone/drakbackup:2641
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Rede usando FTP.\n"

#: standalone/drakbackup:2642
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Rede usando SSH.\n"

#: standalone/drakbackup:2643
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Rede usando rsync.\n"

#: standalone/drakbackup:2645
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Non hai configuración, prema Asistente ou Avanzado.\n"

#: standalone/drakbackup:2650
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Lista de datos a restaurar:\n"
"\n"

#: standalone/drakbackup:2652
#, c-format
msgid "- Restore System Files.\n"
msgstr "- Restaura-los Ficheiros do Sistema.\n"

#: standalone/drakbackup:2654 standalone/drakbackup:2664
#, c-format
msgid "   - from date: %s %s\n"
msgstr "   - dende a data: %s %s\n"

#: standalone/drakbackup:2657
#, c-format
msgid "- Restore User Files: \n"
msgstr "- Restaura-los Ficheiros de Usuario: \n"

#: standalone/drakbackup:2662
#, c-format
msgid "- Restore Other Files: \n"
msgstr "- Restaurar Outros Ficheiros: \n"

#: standalone/drakbackup:2841
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Lista de datos corrompidos:\n"
"\n"

#: standalone/drakbackup:2843
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Deseleccione ou elimíneo a próxima vez."

#: standalone/drakbackup:2853
#, c-format
msgid "Backup files are corrupted"
msgstr "Os ficheiros de copia de seguridade están corrompidos"

#: standalone/drakbackup:2874
#, c-format
msgid "          All of your selected data have been          "
msgstr "          Tódolos datos que seleccionou foron          "

#: standalone/drakbackup:2875
#, c-format
msgid "          Successfully Restored on %s       "
msgstr "          Restaurados con Éxito en %s       "

#: standalone/drakbackup:2976
#, c-format
msgid "/usr/bin/star not found, using tar..."
msgstr ""

#: standalone/drakbackup:3012
#, c-format
msgid "         Restore Configuration       "
msgstr "         Configuración da Restauración       "

#: standalone/drakbackup:3040
#, c-format
msgid "OK to restore the other files."
msgstr "Aceptar para restaurar os outros ficheiros."

#: standalone/drakbackup:3056
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Lista de usuarios a restaurar (só a data máis recente de cada usuario é "
"importante)"

#: standalone/drakbackup:3121
#, c-format
msgid "Please choose the date to restore:"
msgstr "Escolla unha data para restaurar:"

#: standalone/drakbackup:3158
#, c-format
msgid "Restore from Hard Disk."
msgstr "Restaurar dende o Disco Duro."

#: standalone/drakbackup:3160
#, c-format
msgid "Enter the directory where backups are stored"
msgstr "Introduza o directorio onde están as copias de seguridade"

#: standalone/drakbackup:3164
#, c-format
msgid "Directory with backups"
msgstr "Directorio con copias de seguridade"

#: standalone/drakbackup:3218
#, c-format
msgid "Select another media to restore from"
msgstr "Seleccione outro soporte dende o que restaurar"

#: standalone/drakbackup:3220
#, c-format
msgid "Other Media"
msgstr "Outros Soportes"

#: standalone/drakbackup:3225
#, c-format
msgid "Restore system"
msgstr "Restaura-lo sistema"

#: standalone/drakbackup:3226
#, c-format
msgid "Restore Users"
msgstr "Restaura-los Usuarios"

#: standalone/drakbackup:3227
#, c-format
msgid "Restore Other"
msgstr "Restaurar Outras Cousas"

#: standalone/drakbackup:3229
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "Seleccione a ruta para restaurar (en vez de /)"

#: standalone/drakbackup:3233 standalone/drakbackup:3514
#, c-format
msgid "Path To Restore To"
msgstr "Ruta Para Restaurar"

#: standalone/drakbackup:3236
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Facer nova copia de seguridade antes de restaurar (só para incrementais)"

#: standalone/drakbackup:3238
#, c-format
msgid "Remove user directories before restore."
msgstr "Elimina-los directorios de usuario antes de restaurar."

#: standalone/drakbackup:3322
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3325
#, c-format
msgid "Search Backups"
msgstr "Buscar Copias de Seguridade"

#: standalone/drakbackup:3343
#, c-format
msgid "No matches found..."
msgstr "Non se atoparon resultados..."

#: standalone/drakbackup:3347
#, c-format
msgid "Restore Selected"
msgstr "Restaura-los Seleccionados"

#: standalone/drakbackup:3482
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""
"Clique en data/hora para ve-los ficheiros de copia de seguridade.\n"
"Prema Ctrl e clique para seleccionar varios ficheiros."

#: standalone/drakbackup:3488
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Restaura-los Seleccionados\n"
"Entrada do Catálogo"

#: standalone/drakbackup:3497
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Restaura-los Seleccionados\n"
"Ficheiros"

#: standalone/drakbackup:3573
#, c-format
msgid "Backup files not found at %s."
msgstr "Non se atoparon ficheiros de copia de seguridade en %s."

#: standalone/drakbackup:3586
#, c-format
msgid "Restore From CD"
msgstr "Restaurar Dende un CD"

#: standalone/drakbackup:3586
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Insira o CD ca etiqueta de volume %s\n"
"na unidade de CD que está montada en /mnt/cdrom"

#: standalone/drakbackup:3588
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "A etiqueta do CD non é correcta. A etiqueta do disco é %s."

#: standalone/drakbackup:3598
#, c-format
msgid "Restore From Tape"
msgstr "Restaurar Dende unha Cinta"

#: standalone/drakbackup:3598
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Insira a cinta ca etiqueta de volume %s\n"
"no dispositivo da unidade de cinta %s"

#: standalone/drakbackup:3600
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "A etiqueta da cinta non é correcta. A etiqueta da cinta é %s."

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network"
msgstr "Restaurar Dende a Rede"

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Restaurar Dende a Rede usando o Protocolo: %s"

#: standalone/drakbackup:3612
#, c-format
msgid "Host Name"
msgstr "Nome de Máquina"

#: standalone/drakbackup:3613
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3620
#, c-format
msgid "Password required"
msgstr "Contrasinal requirido"

#: standalone/drakbackup:3626
#, c-format
msgid "Username required"
msgstr "Nome de usuario requirido"

#: standalone/drakbackup:3629
#, c-format
msgid "Hostname required"
msgstr "Cómpre un nome de máquina"

#: standalone/drakbackup:3634
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3646
#, c-format
msgid "Files Restored..."
msgstr "Ficheiros Restaurados..."

#: standalone/drakbackup:3649
#, c-format
msgid "Restore Failed..."
msgstr "Fallo durante a Restauración"

#: standalone/drakbackup:3677
#, c-format
msgid "%s not retrieved..."
msgstr "%s non recuperado..."

#: standalone/drakbackup:3901 standalone/drakbackup:3970
#, c-format
msgid "Search for files to restore"
msgstr "Buscar ficheiros para restaurar"

#: standalone/drakbackup:3905
#, c-format
msgid "Restore all backups"
msgstr "Restaurar tódalas copias de seguridade"

#: standalone/drakbackup:3913
#, c-format
msgid "Custom Restore"
msgstr "Restauración Personalizada"

#: standalone/drakbackup:3917 standalone/drakbackup:3966
#, c-format
msgid "Restore From Catalog"
msgstr "Restaurar Dende un Catálogo"

#: standalone/drakbackup:3938
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Non se atoparon copias de seguridade para restaurar...\n"

#: standalone/drakbackup:3939
#, c-format
msgid "Verify that %s is the correct path"
msgstr "Verificar que %s é a ruta correcta"

#: standalone/drakbackup:3940
#, c-format
msgid " and the CD is in the drive"
msgstr " e que o CD está na unidade"

#: standalone/drakbackup:3942
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3958
#, c-format
msgid "CD in place - continue."
msgstr "CD introducido - continuar."

#: standalone/drakbackup:3963
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3964
#, c-format
msgid "Directory To Restore From"
msgstr "Directorio Dende o que Restaurar"

#: standalone/drakbackup:4000
#, c-format
msgid "Restore Progress"
msgstr "Progreso da Restauración"

#: standalone/drakbackup:4108
#, c-format
msgid "Build Backup"
msgstr "Construir Copia de Seguridade"

#: standalone/drakbackup:4141 standalone/drakbackup:4438
#, c-format
msgid "Restore"
msgstr "Restaurar"

#: standalone/drakbackup:4233
#, c-format
msgid "Please select data to restore..."
msgstr "Seleccione os datos a restaurar..."

#: standalone/drakbackup:4273
#, c-format
msgid "Backup system files"
msgstr "Facer copia de seguridade dos ficheiros do sistema"

#: standalone/drakbackup:4276
#, c-format
msgid "Backup user files"
msgstr "Facer copia de seguridade dos ficheiros de usuario"

#: standalone/drakbackup:4279
#, c-format
msgid "Backup other files"
msgstr "Facer copia de seguridade doutros ficheiros"

#: standalone/drakbackup:4282 standalone/drakbackup:4316
#, c-format
msgid "Total Progress"
msgstr "Progreso Total"

#: standalone/drakbackup:4308
#, c-format
msgid "Sending files by FTP"
msgstr "Enviando ficheiros por FTP"

#: standalone/drakbackup:4311
#, c-format
msgid "Sending files..."
msgstr "Enviando ficheiros..."

#: standalone/drakbackup:4381
#, fuzzy, c-format
msgid "Backup Now from configuration file"
msgstr "Configuración da rede"

#: standalone/drakbackup:4386
#, c-format
msgid "View Backup Configuration."
msgstr "Ve-la Configuración da Copia de Seguridade."

#: standalone/drakbackup:4412
#, c-format
msgid "Wizard Configuration"
msgstr "Configuración do Asistente"

#: standalone/drakbackup:4417
#, c-format
msgid "Advanced Configuration"
msgstr "Configuración Avanzada"

#: standalone/drakbackup:4422
#, c-format
msgid "View Configuration"
msgstr "Ve-la Configuración"

#: standalone/drakbackup:4426
#, c-format
msgid "View Last Log"
msgstr "Ve-lo Último Log"

#: standalone/drakbackup:4431
#, c-format
msgid "Backup Now"
msgstr "Facer Copia de Seguridade Agora"

#: standalone/drakbackup:4435
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Non se atopou o ficheiro de configuración\n"
"prema en Asistente ou Avanzada."

#: standalone/drakbackup:4473
#, fuzzy, c-format
msgid "Load profile"
msgstr "Ficheiro local"

#: standalone/drakbackup:4482
#, fuzzy, c-format
msgid "Save profile as..."
msgstr "Gardar coma..."

#: standalone/drakbackup:4504 standalone/drakbackup:4507
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:49
#, c-format
msgid "No bootloader found, creating a new configuration"
msgstr "Non se atopou o cargador de arrinque, creando unha nova configuración"

#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_Ficheiro"

#: standalone/drakboot:85 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr "/Ficheiro/_Saír"

#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:125
#, c-format
msgid "Text only"
msgstr "Só texto"

#: standalone/drakboot:126
#, c-format
msgid "Verbose"
msgstr "Detallado"

#: standalone/drakboot:127
#, c-format
msgid "Silent"
msgstr ""

#: standalone/drakboot:134
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:135
#, c-format
msgid "Do you want to configure it now?"
msgstr "Desexa configuralo agora?"

#: standalone/drakboot:144
#, c-format
msgid "Install themes"
msgstr "Instalar temas"

#: standalone/drakboot:146
#, c-format
msgid "Graphical boot theme selection"
msgstr "Selección do tema do arrinque gráfico"

#: standalone/drakboot:149
#, fuzzy, c-format
msgid "Graphical boot mode:"
msgstr "Usar arrinque gráfico"

#: standalone/drakboot:151
#, c-format
msgid "Theme"
msgstr "Tema"

#: standalone/drakboot:154
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Amosa-lo tema por\n"
"debaixo da consola"

#: standalone/drakboot:159
#, c-format
msgid "Create new theme"
msgstr "Crear novo tema"

#: standalone/drakboot:191
#, c-format
msgid "Default user"
msgstr "Usuario por omisión"

#: standalone/drakboot:192
#, c-format
msgid "Default desktop"
msgstr "Escritorio por omisión"

#: standalone/drakboot:195
#, c-format
msgid "No, I do not want autologin"
msgstr "Non, non quero login automático"

#: standalone/drakboot:196
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Si, quero login automático con este (usuario, escritorio)"

#: standalone/drakboot:203
#, c-format
msgid "System mode"
msgstr ""

#: standalone/drakboot:206
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Lanza-lo ambiente gráfico ó inicia-lo sistema"

#: standalone/drakboot:272
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr "Ferramenta de Informe de Erros de Mandriva Linux"

#: standalone/drakbug:46
#, c-format
msgid "Mandriva Linux Control Center"
msgstr "Centro de Control de Mandriva Linux"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr "Ferramenta de sincronización"

#: standalone/drakbug:49 standalone/drakbug:152
#, fuzzy, c-format
msgid "Standalone Tools"
msgstr "Ferramentas de consola"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr "Mandriva Online"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr "Control Remoto"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "Xestor de Software"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr "Ferramenta de Migración de Windows"

#: standalone/drakbug:58 standalone/draksambashare:1236
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr "Asistentes de Configuración"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""
"ou Nome da Aplicación\n"
"(ou Ruta Completa):"

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "Atopa-lo Paquete"

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "Paquete: "

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "Kernel:"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""
"Para enviar un informe de erros, prema no botón informar.  \n"
"Isto abrirá unha ventá do navegador web en %s onde atopará un formulario "
"para encher.  A información que se amosa enriba transferirase a ese "
"servidor.  \n"
"Cousas útiles que se poden incluir no seu informe son a saída de lspci, a "
"versión do kernel, e /proc/cpuinfo."

#: standalone/drakbug:107
#, c-format
msgid "Report"
msgstr "Informar"

#: standalone/drakbug:162
#, c-format
msgid "Not installed"
msgstr "Non instalado"

#: standalone/drakbug:174
#, c-format
msgid "Package not installed"
msgstr "Paquete non instalado"

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, c-format
msgid "not defined"
msgstr "non definido"

#: standalone/drakclock:41
#, c-format
msgid "Change Time Zone"
msgstr "Cambia-la Zona Horaria"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "Zona Horaria - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "¿O reloxo interno usa a hora GMT?"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "Interface de rede"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""
"O seu ordenador pode sincroniza-lo seu reloxo\n"
"ca hora dun servidor remoto usando NTP"

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "Servidor:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr "Non se puido sincronizar con %s."

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "Reiniciar"

#: standalone/drakclock:224
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""
"Cómpre instalar o paquete ntp para\n"
"activar o Network Time Protocol\n"
"\n"
"Desexa instalar ntp?"

#: standalone/drakconnect:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Configuración da rede (%d adaptadores)"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Gateway:"
msgstr "Pasarela:"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Interface:"
msgstr "Interface:"

#: standalone/drakconnect:93 standalone/net_monitor:116
#, c-format
msgid "Wait please"
msgstr "Agarde un chisco"

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "Interface"

#: standalone/drakconnect:109 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "State"
msgstr "Estado"

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr "Nome de máquina: "

#: standalone/drakconnect:128
#, c-format
msgid "Configure hostname..."
msgstr "Configura-lo nome da máquina..."

#: standalone/drakconnect:142 standalone/drakconnect:845
#, c-format
msgid "LAN configuration"
msgstr "Configuración da LAN"

#: standalone/drakconnect:147
#, c-format
msgid "Configure Local Area Network..."
msgstr "Configura-la Rede de Área Local..."

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Aplicar"

#: standalone/drakconnect:188
#, c-format
msgid "Manage connections"
msgstr "Xestiona-las conexións"

#: standalone/drakconnect:215
#, c-format
msgid "Device selected"
msgstr "Dispositivo seleccionado"

#: standalone/drakconnect:296
#, c-format
msgid "IP configuration"
msgstr "Configuración do IP"

#: standalone/drakconnect:335
#, c-format
msgid "DNS servers"
msgstr "Servidores DNS"

#: standalone/drakconnect:343
#, c-format
msgid "Search Domain"
msgstr "Buscar Dominio"

#: standalone/drakconnect:351
#, c-format
msgid "static"
msgstr "estático"

#: standalone/drakconnect:351
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:515
#, fuzzy, c-format
msgid "Flow control"
msgstr "<control>G"

#: standalone/drakconnect:516
#, fuzzy, c-format
msgid "Line termination"
msgstr "Estación Internet"

#: standalone/drakconnect:527
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "Tempo de espera do módem"

#: standalone/drakconnect:531
#, c-format
msgid "Use lock file"
msgstr "Usar ficheiro lock"

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:536
#, fuzzy, c-format
msgid "Busy wait"
msgstr "Saír"

#: standalone/drakconnect:541
#, c-format
msgid "Modem sound"
msgstr "Son do módem"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "Activar"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "Desactivar"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr ""

#: standalone/drakconnect:594
#, c-format
msgid "Module name"
msgstr "Nome do módulo"

#: standalone/drakconnect:595
#, c-format
msgid "Mac Address"
msgstr "Enderezo Mac"

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr "Bus"

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr "Localización no bus"

#: standalone/drakconnect:700 standalone/drakgw:311
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Non se detectou ningún adaptador de rede ethernet no seu sistema. Execute a "
"ferramenta de configuración de hardware."

#: standalone/drakconnect:708
#, c-format
msgid "Remove a network interface"
msgstr "Eliminar unha interface de rede"

#: standalone/drakconnect:712
#, c-format
msgid "Select the network interface to remove:"
msgstr "Seleccione unha interface de rede para eliminala:"

#: standalone/drakconnect:744
#, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"Ocorreu un erro mentres se eliminaba a interface de rede \"%s\":\n"
"\n"
"%s"

#: standalone/drakconnect:745
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr "Noraboa, a interface de rede \"%s\" eliminouse con éxito"

#: standalone/drakconnect:761
#, c-format
msgid "No IP"
msgstr "Sen IP"

#: standalone/drakconnect:762
#, c-format
msgid "No Mask"
msgstr "Sen Máscara"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "up"
msgstr "arriba"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "down"
msgstr "abaixo"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Connected"
msgstr "Conectado"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Not connected"
msgstr "Non conectado"

#: standalone/drakconnect:800
#, c-format
msgid "Disconnect..."
msgstr "Desconectar..."

#: standalone/drakconnect:800
#, c-format
msgid "Connect..."
msgstr "Conectar..."

#: standalone/drakconnect:841
#, c-format
msgid "Deactivate now"
msgstr "Desactivar agora"

#: standalone/drakconnect:841
#, c-format
msgid "Activate now"
msgstr "Activar agora"

#: standalone/drakconnect:849
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Non ten ningunha interface configurada.\n"
"Configúreas primeiro premendo en 'Configurar'"

#: standalone/drakconnect:863
#, c-format
msgid "LAN Configuration"
msgstr "Configuración da LAN"

#: standalone/drakconnect:875
#, c-format
msgid "Adapter %s: %s"
msgstr "Adaptador %s: %s"

#: standalone/drakconnect:884
#, c-format
msgid "Boot Protocol"
msgstr "Protocolo de Arrinque"

#: standalone/drakconnect:885
#, c-format
msgid "Started on boot"
msgstr "Iniciado ó arrincar"

#: standalone/drakconnect:921
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""
"Esta interface ainda non foi configurada.\n"
"Execute o asistente \"Engadir unha interface\" dende o\n"
"Centro de Control de Mandriva Linux"

#: standalone/drakconnect:975 standalone/net_applet:51
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""
"Non ten configurada ningunha conexión á Internet.\n"
"Execute o asistente \"%s\" dende o\n"
"Centro de Control de Mandriva Linux"

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
#, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "Configurar unha nova interface de rede (LAN, RDSI, ADSL, ...)"

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr "Configuración da conexión á Internet"

#: standalone/drakconnect:994
#, c-format
msgid "Third DNS server (optional)"
msgstr "Terceiro Servidor DNS (opcional)"

#: standalone/drakconnect:1016
#, c-format
msgid "Internet Connection Configuration"
msgstr "Configuración da Conexión á Internet"

#: standalone/drakconnect:1017
#, c-format
msgid "Internet access"
msgstr "Acceso á Internet"

#: standalone/drakconnect:1019 standalone/net_monitor:95
#, c-format
msgid "Connection type: "
msgstr "Tipo de conexión: "

#: standalone/drakconnect:1022
#, c-format
msgid "Status:"
msgstr "Estado:"

#: standalone/drakconnect:1027
#, c-format
msgid "Parameters"
msgstr "Parámetros"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr "GDM (GNOME Display Manager)"

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr "KDM (KDE Display Manager)"

#: standalone/drakedm:42
#, c-format
msgid "XDM (X Display Manager)"
msgstr "XDM (X Display Manager)"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:72
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "Xa se fixo o cambio, ¿desexa reinicia-lo servicio dm?"

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""
"Vai pechar tódolos programas que se están executando e perder a súa sesión "
"actual. ¿Está seguro de que desexa reiniciar o servicio dm?"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "Busca-las fontes instaladas"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr "Deseleccionar as fontes instaladas"

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr "analisar tódalas fontes"

#: standalone/drakfont:210
#, c-format
msgid "No fonts found"
msgstr "Non se atoparon fontes"

#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
#: standalone/drakfont:412 standalone/drakfont:426
#, c-format
msgid "done"
msgstr "feito"

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "Non se puido atopar ningunha fonte nas particións montadas"

#: standalone/drakfont:258
#, c-format
msgid "Reselect correct fonts"
msgstr ""

#: standalone/drakfont:261
#, c-format
msgid "Could not find any font.\n"
msgstr "Non se puido atopar ningunha fonte.\n"

#: standalone/drakfont:271
#, c-format
msgid "Search for fonts in installed list"
msgstr ""

#: standalone/drakfont:296
#, c-format
msgid "%s fonts conversion"
msgstr "Conversión de fontes %s"

#: standalone/drakfont:325
#, c-format
msgid "Fonts copy"
msgstr "Copia das fontes"

#: standalone/drakfont:328
#, c-format
msgid "True Type fonts installation"
msgstr "Instalación de fontes True Type"

#: standalone/drakfont:335
#, fuzzy, c-format
msgid "please wait during ttmkfdir..."
msgstr "Agarde mentres ttmkfdir..."

#: standalone/drakfont:336
#, c-format
msgid "True Type install done"
msgstr "Rematouse a instalación de True Type"

#: standalone/drakfont:342 standalone/drakfont:357
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:351
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:361
#, c-format
msgid "Suppress Temporary Files"
msgstr "Elimina-los Ficheiros Temporais"

#: standalone/drakfont:364
#, c-format
msgid "Restart XFS"
msgstr "Reiniciar XFS"

#: standalone/drakfont:410 standalone/drakfont:420
#, c-format
msgid "Suppress Fonts Files"
msgstr "Elimina-los Ficheiros de Fontes"

#: standalone/drakfont:422
#, fuzzy, c-format
msgid "xfs restart"
msgstr "restrinxir"

#: standalone/drakfont:430
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:474 standalone/drakfont:483
#, c-format
msgid "DrakFont"
msgstr "DrakFont"

#: standalone/drakfont:484
#, c-format
msgid "Font List"
msgstr "Lista de Fontes"

#: standalone/drakfont:487
#, c-format
msgid "Get Windows Fonts"
msgstr "Obter as Fontes de Windows"

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "Acerca de"

#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
#, c-format
msgid "Uninstall"
msgstr "Desinstalar"

#: standalone/drakfont:496
#, c-format
msgid "Import"
msgstr "Importar"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:514
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""
"Copyright © 2001-2002 de Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (versión orixinal)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"

#: standalone/drakfont:523
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:539
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:558
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Elixa as aplicacións que soportarán as fontes:"

#: standalone/drakfont:569
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:570
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:571
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:572
#, c-format
msgid "Generic Printers"
msgstr "Impresoras Xenéricas"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Seleccione o directorio ou ficheiro de fontes e prema en 'Engadir'"

#: standalone/drakfont:587
#, c-format
msgid "File Selection"
msgstr "Selección do Ficheiro"

#: standalone/drakfont:591
#, c-format
msgid "Fonts"
msgstr "Fontes"

#: standalone/drakfont:654
#, c-format
msgid "Import fonts"
msgstr "Importar fontes"

#: standalone/drakfont:659
#, c-format
msgid "Install fonts"
msgstr "Instalar fontes"

#: standalone/drakfont:694
#, c-format
msgid "click here if you are sure."
msgstr "prema aqui se está segur@."

#: standalone/drakfont:696
#, c-format
msgid "here if no."
msgstr "aqui se non."

#: standalone/drakfont:735
#, c-format
msgid "Unselected All"
msgstr "Deseleccionar Todo"

#: standalone/drakfont:738
#, c-format
msgid "Selected All"
msgstr "Seleccionadas Todas"

#: standalone/drakfont:741
#, c-format
msgid "Remove List"
msgstr "Elimina-la Lista"

#: standalone/drakfont:752 standalone/drakfont:771
#, c-format
msgid "Importing fonts"
msgstr "Importando fontes"

#: standalone/drakfont:756 standalone/drakfont:776
#, c-format
msgid "Initial tests"
msgstr "Probas iniciais"

#: standalone/drakfont:757
#, c-format
msgid "Copy fonts on your system"
msgstr "Copia-las fontes no sistema"

#: standalone/drakfont:758
#, c-format
msgid "Install & convert Fonts"
msgstr "Instalar & converti-las fontes"

#: standalone/drakfont:759
#, c-format
msgid "Post Install"
msgstr "Despois de Instalar"

#: standalone/drakfont:777
#, c-format
msgid "Remove fonts on your system"
msgstr "Eliminar fontes do sistema"

#: standalone/drakfont:778
#, c-format
msgid "Post Uninstall"
msgstr "Despois de Desinstalar"

#: standalone/drakgw:50 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "Sentímolo. só soportamos kernels da serie 2.4 e superiores."

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr "Compartimento da Conexión á Internet"

#: standalone/drakgw:79
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Está a piques de configurar o seu ordenador para que comparta a conexión á "
"Internet.\n"
"Con esta funcionalidade, outros ordenadores da súa rede local poden usa-la "
"conexión á Internet deste ordenador.\n"
"\n"
"Asegúrese de que configurou o seu acceso á Rede/Internet co drakconnect "
"antes de continuar.\n"
"\n"
"Nota: necesita un Adaptador de Rede dedicado para configurar unha Rede de "
"Área Local (LAN)."

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"A configuración do compartimento da conexión á Internet xa foi feita.\n"
"Actualmente está activado.\n"
"\n"
"¿Qué desexa facer?"

#: standalone/drakgw:99
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"A configuración do compartimento da conexión á Internet xa foi feita.\n"
"Actualmente está desactivado.\n"
"\n"
"¿Qué desexa facer?"

#: standalone/drakgw:105
#, c-format
msgid "Reconfigure"
msgstr "Volver configurar"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Só hai un adaptador de rede configurado no seu sistema:\n"
"\n"
"%s\n"
"\n"
"Vaise configura-la Rede de Área Local usando ese adaptador."

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Escolla o adaptador de rede que vai estar conectado á Rede de Área Local."

#: standalone/drakgw:177
#, fuzzy, c-format
msgid "Local Area Network settings"
msgstr "Enderezo da Rede Local"

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr "Enderezo IP local"

#: standalone/drakgw:182
#, c-format
msgid "The internal domain name"
msgstr "Nome do dominio interno"

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
"¡Atopouse un conflicto potencial de enderezos da LAN na configuración actual "
"de %s!\n"

#: standalone/drakgw:204
#, fuzzy, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr "Configuración de Terminal Server"

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr "Usar esta pasarela coma un servidor de nomes de dominio"

#: standalone/drakgw:209
#, c-format
msgid "The DNS Server IP"
msgstr "IP do Servidor DNS"

#: standalone/drakgw:236
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""
"Configuración do Servidor DHCP.\n"
"\n"
"Aqui pode seleccionar diferentes opcións para a configuración do servidor "
"DHCP.\n"
"Se non sabe o significado dunha opción, déixeo como está."

#: standalone/drakgw:243
#, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "Usar configuración automática (DHCP)"

#: standalone/drakgw:244
#, c-format
msgid "The DHCP start range"
msgstr "O comezo do rango DHCP"

#: standalone/drakgw:245
#, c-format
msgid "The DHCP end range"
msgstr "O remate do rango DHCP"

#: standalone/drakgw:246
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:247
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:270
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr ""

#: standalone/drakgw:274
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr ""

#: standalone/drakgw:275
#, c-format
msgid "Admin mail"
msgstr ""

#: standalone/drakgw:276
#, fuzzy, c-format
msgid "Visible hostname"
msgstr "Nome da máquina remota"

#: standalone/drakgw:277
#, c-format
msgid "Proxy port"
msgstr "Porto do proxy"

#: standalone/drakgw:278
#, fuzzy, c-format
msgid "Cache size (MB)"
msgstr "Tamaño da caché"

#: standalone/drakgw:300
#, fuzzy, c-format
msgid "Broadcast printer information"
msgstr "Información da unidade de disco duro"

#: standalone/drakgw:317
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Agora o Compartimento da Conexión á Internet está activado."

#: standalone/drakgw:323
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Agora o Compartimento da Conexión á Internet está desactivado."

#: standalone/drakgw:329
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"Xa está todo configurado.\n"
"Agora pode compartir a conexión á Internet con outros ordenadores da Rede "
"Local, usando a configuración automática de rede (DHCP) e un\n"
"servidor Proxy de Caché Transparente (SQUID)."

#: standalone/drakgw:364
#, c-format
msgid "Disabling servers..."
msgstr "Desactivando os servidores..."

#: standalone/drakgw:378
#, c-format
msgid "Firewalling configuration detected!"
msgstr "¡Detectouse unha configuración de cortalumes!"

#: standalone/drakgw:379
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"¡Atención! Detectouse unha configuración de cortalumes existente. Pode que "
"teña que facer algún arranxo manual trala instalación."

#: standalone/drakgw:384
#, c-format
msgid "Configuring..."
msgstr "Configurando..."

#: standalone/drakgw:385
#, c-format
msgid "Configuring firewall..."
msgstr "Configurando o cortalumes..."

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""
" drakhelp 0.1\n"
"Copyright © 2003-2005 Mandriva.\n"
"Isto é software libre e pode ser redistribuido baixo os termos da GNU GPL.\n"
"\n"
"Uso: \n"

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr " --help                - amosa esta axuda\n"

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:51
#, c-format
msgid "Mandriva Linux Help Center"
msgstr "Centro de Axuda de Mandriva Linux"

#: standalone/drakhelp:51
#, c-format
msgid "No Help entry for %s\n"
msgstr ""

#: standalone/drakhosts:98
#, c-format
msgid "Please add an host to be able to modify it."
msgstr "Por favor, engada unha máquina para podela modificar."

#: standalone/drakhosts:108
#, c-format
msgid "Please modify information"
msgstr "Por favor modifique a información"

#: standalone/drakhosts:109
#, c-format
msgid "Please delete information"
msgstr "Por favor elimine a información"

#: standalone/drakhosts:110
#, c-format
msgid "Please add information"
msgstr "Por favor engada a información"

#: standalone/drakhosts:115
#, c-format
msgid "IP address:"
msgstr "Enderezo IP:"

#: standalone/drakhosts:116
#, c-format
msgid "Host name:"
msgstr "Nome de máquina:"

#: standalone/drakhosts:117
#, c-format
msgid "Host Aliases:"
msgstr ""

#: standalone/drakhosts:123
#, c-format
msgid "Please enter a valid IP address."
msgstr "Introduza un enderezo IP válido."

#: standalone/drakhosts:129
#, c-format
msgid "Same IP is already in %s file."
msgstr "O mesmo IP xa está no ficheiro %s."

#: standalone/drakhosts:197
#, c-format
msgid "Host Aliases"
msgstr ""

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr "DrakHOSTS administra as definicións de máquinas"

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr "Erro ó engadir a máquina."

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr "Erro ó Modificar a máquina."

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr "Erro ó eliminar a máquina."

#: standalone/drakids:26
#, fuzzy, c-format
msgid "Allowed addresses"
msgstr "Permitirlle a tódolos usuarios"

#: standalone/drakids:57
#, c-format
msgid "Log"
msgstr "Rexistro"

#: standalone/drakids:61
#, fuzzy, c-format
msgid "Clear logs"
msgstr "Borrar todas"

#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470
#, c-format
msgid "Blacklist"
msgstr "Lista negra"

#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475
#, c-format
msgid "Whitelist"
msgstr "Lista branca"

#: standalone/drakids:71
#, c-format
msgid "Remove from blacklist"
msgstr "Quitar da lista negra"

#: standalone/drakids:72
#, c-format
msgid "Move to whitelist"
msgstr "Mover á lista branca"

#: standalone/drakids:84
#, c-format
msgid "Remove from whitelist"
msgstr "Quitar da lista branca"

#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385
#, c-format
msgid "Unable to contact daemon"
msgstr "Non se puido contactar co daemon"

#: standalone/drakids:202
#, c-format
msgid "Date"
msgstr "Data"

#: standalone/drakids:203
#, c-format
msgid "Attacker"
msgstr "Atacante"

#: standalone/drakids:204
#, c-format
msgid "Attack type"
msgstr "Tipo de ataque"

#: standalone/drakids:205
#, c-format
msgid "Service"
msgstr "Servicio"

#: standalone/drakids:206 standalone/net_applet:72
#, c-format
msgid "Network interface"
msgstr "Interface de rede"

#: standalone/draknfs:41
#, c-format
msgid "map root user as anonymous"
msgstr ""

#: standalone/draknfs:42
#, c-format
msgid "map all users to anonymous user"
msgstr ""

#: standalone/draknfs:43
#, c-format
msgid "No user UID mapping"
msgstr ""

#: standalone/draknfs:44
#, c-format
msgid "allow real remote root access"
msgstr ""

#: standalone/draknfs:83
#, c-format
msgid "NFS server"
msgstr "Servidor NFS"

#: standalone/draknfs:83
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr "Reiniciando/Recargando o servidor NFS..."

#: standalone/draknfs:84
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr "Erro ó Reiniciar/Recargar o servidor NFS"

#: standalone/draknfs:100 standalone/draksambashare:203
#, c-format
msgid "Directory Selection"
msgstr "Selección de Directorio"

#: standalone/draknfs:105 standalone/draksambashare:208
#, c-format
msgid "Should be a directory."
msgstr "Debe ser un directorio."

#: standalone/draknfs:136
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""

#: standalone/draknfs:151
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
"off root squashing. This option is mainly useful for diskless clients "
"(no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
"exported public FTP directories, news spool directories, etc. The opposite "
"option is no user UID mapping (no_all_squash), which is the default "
"setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
"the uid and gid of the anonymous account.\n"
msgstr ""

#: standalone/draknfs:167
#, c-format
msgid "Synchronous access:"
msgstr ""

#: standalone/draknfs:168
#, c-format
msgid "Secured Connection:"
msgstr "Conexión Segura:"

#: standalone/draknfs:169
#, c-format
msgid "Read-Only share:"
msgstr "Recurso de Só Lectura:"

#: standalone/draknfs:171
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr "<span weight=\"bold\">Opcións Avanzadas</span>"

#: standalone/draknfs:172
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""

#: standalone/draknfs:173
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""

#: standalone/draknfs:306
#, c-format
msgid "Please add an NFS share to be able to modify it."
msgstr "Por favor, engada un recurso NFS para podelo modificar."

#: standalone/draknfs:378
#, c-format
msgid "Advanced Options Help"
msgstr "Axuda de Opcións Avanzadas"

#: standalone/draknfs:389
#, c-format
msgid "NFS directory"
msgstr "Directorio NFS"

#: standalone/draknfs:391 standalone/draksambashare:594
#: standalone/draksambashare:773
#, c-format
msgid "Directory:"
msgstr "Directorio:"

#: standalone/draknfs:394
#, c-format
msgid "Host access"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Access:"
msgstr "Acceso:"

#: standalone/draknfs:396
#, c-format
msgid "Hosts Access"
msgstr ""

#: standalone/draknfs:399
#, c-format
msgid "User ID Mapping"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "User ID:"
msgstr "ID de usuario:"

#: standalone/draknfs:401
#, c-format
msgid "Help User ID"
msgstr ""

#: standalone/draknfs:402
#, c-format
msgid "Anonymous user ID:"
msgstr "ID do usuario anónimo:"

#: standalone/draknfs:403
#, c-format
msgid "Anonymous Group ID:"
msgstr ""

#: standalone/draknfs:444
#, c-format
msgid "Can't create this directory."
msgstr "Non se puido crear este directorio."

#: standalone/draknfs:447
#, c-format
msgid "You must specify hosts access."
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Share Directory"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Hosts Wildcard"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "General Options"
msgstr "Opcións Xerais"

#: standalone/draknfs:527
#, c-format
msgid "Custom Options"
msgstr "Opcións Personalizadas"

#: standalone/draknfs:539 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Please enter a directory to share."
msgstr "Introduza o directorio que se vai compartir."

#: standalone/draknfs:546
#, c-format
msgid "Please use the modify button to set right access."
msgstr "Use o botón modificar para establecer o acceso correcto."

#: standalone/draknfs:600
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr "DrakNFS administra os recursos NFS"

#: standalone/draknfs:609
#, c-format
msgid "Failed to add NFS share."
msgstr "Erro ó engadir o recurso NFS."

#: standalone/draknfs:616
#, c-format
msgid "Failed to Modify NFS share."
msgstr "Erro ó Modificar o recurso NFS."

#: standalone/draknfs:623
#, c-format
msgid "Failed to remove an NFS share."
msgstr "Erro ó eliminar o recurso NFS."

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr "Configuración do sistema"

#: standalone/drakperm:22
#, c-format
msgid "Custom settings"
msgstr "Configuración personalizada"

#: standalone/drakperm:23
#, c-format
msgid "Custom & system settings"
msgstr "Configuracións do sistema & personalizada"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "Editable"

#: standalone/drakperm:48 standalone/drakperm:323
#: standalone/draksambashare:101
#, c-format
msgid "Path"
msgstr "Ruta"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Usuario"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Grupo"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "Permisos"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr "Engadir unha nova regra"

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr "Edita-la regra actual"

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""
"O nivel de seguridade actual é %s.\n"
"Seleccione permisos para ver/editar"

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "Arriba"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr "Move-la regra seleccionada un nivel arriba"

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "Abaixo"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr "Move-la regra seleccionada un nivel abaixo"

#: standalone/drakperm:122
#, c-format
msgid "Add a rule"
msgstr "Engadir unha regra"

#: standalone/drakperm:122
#, c-format
msgid "Add a new rule at the end"
msgstr "Engadir unha nova regra ó final"

#: standalone/drakperm:123
#, c-format
msgid "Delete selected rule"
msgstr "Elimina-la regra seleccionada"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "explorar"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "usuario"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "grupo"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "outro"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Lectura"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr "Permitirlle a \"%s\" le-lo ficheiro"

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "Escritura"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "Permitirlle a \"%s\" escribir no ficheiro"

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "Execución"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "Permitirlle a \"%s\" executa-lo ficheiro"

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr "Sticky-bit"

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Usado para o directorio:\n"
"neste directorio só o propietario do directorio ou do ficheiro pode eliminalo"

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr "Usa-lo id do propietario para a execución"

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr "Usa-lo id do grupo para a execución"

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "Usuario: "

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "Grupo: "

#: standalone/drakperm:298
#, c-format
msgid "Current user"
msgstr "Usuario actual"

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""
"Cando está seleccionado, non se poden cambia-lo propietario nin o grupo"

#: standalone/drakperm:309
#, c-format
msgid "Path selection"
msgstr "Selección da ruta"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr "Propiedade"

#: standalone/drakperm:380
#, c-format
msgid ""
"The first character of the path must be a slash (\"/\"):\n"
"\"%s\""
msgstr ""

#: standalone/drakperm:390
#, c-format
msgid "Both the username and the group must valid!"
msgstr ""

#: standalone/drakperm:391
#, c-format
msgid "User: %s"
msgstr ""

#: standalone/drakperm:392
#, c-format
msgid "Group: %s"
msgstr ""

#: standalone/drakroam:33
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""
"Non ten ningunha interface wireless.\n"
"Execute o asistente \"%s\" dende o Centro de Control de Mandriva Linux"

#: standalone/drakroam:48
#, c-format
msgid "SSID"
msgstr "SSID"

#: standalone/drakroam:49
#, c-format
msgid "Signal strength"
msgstr "Potencia do sinal"

#: standalone/drakroam:51
#, c-format
msgid "Encryption"
msgstr "Cifrado"

#: standalone/drakroam:112
#, c-format
msgid "Please enter settings for wireless network \"%s\""
msgstr "Introduza as preferencias para a rede sen fíos \"%s\""

#: standalone/drakroam:123
#, c-format
msgid "DNS server"
msgstr "Servidor DNS"

#: standalone/drakroam:228
#, c-format
msgid "Connect"
msgstr "Conectar"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:229 standalone/printerdrake:251
#, c-format
msgid "Refresh"
msgstr "Actualizar"

#: standalone/draksambashare:68
#, c-format
msgid "Share directory"
msgstr "Compartir directorio"

#: standalone/draksambashare:69 standalone/draksambashare:102
#, c-format
msgid "Comment"
msgstr "Comentario"

#: standalone/draksambashare:70 standalone/draksambashare:103
#, fuzzy, c-format
msgid "Browseable"
msgstr "Explorar"

#: standalone/draksambashare:71
#, c-format
msgid "Public"
msgstr "Público"

#: standalone/draksambashare:72 standalone/draksambashare:108
#, fuzzy, c-format
msgid "Writable"
msgstr "Escritura"

#: standalone/draksambashare:73 standalone/draksambashare:149
#, fuzzy, c-format
msgid "Create mask"
msgstr "Crear"

#: standalone/draksambashare:74 standalone/draksambashare:150
#, fuzzy, c-format
msgid "Directory mask"
msgstr "Directorio"

#: standalone/draksambashare:75
#, c-format
msgid "Read list"
msgstr "Lista de lectura"

#: standalone/draksambashare:76 standalone/draksambashare:109
#: standalone/draksambashare:608
#, c-format
msgid "Write list"
msgstr "Lista de escritura"

#: standalone/draksambashare:77 standalone/draksambashare:141
#, fuzzy, c-format
msgid "Admin users"
msgstr "Engadir usuario"

#: standalone/draksambashare:78 standalone/draksambashare:142
#, fuzzy, c-format
msgid "Valid users"
msgstr "Engadir usuario"

#: standalone/draksambashare:79
#, c-format
msgid "Inherit Permissions"
msgstr "Herdar Permisos"

#: standalone/draksambashare:80 standalone/draksambashare:143
#, c-format
msgid "Hide dot files"
msgstr "Agocha-los ficheiros con punto"

#: standalone/draksambashare:82 standalone/draksambashare:148
#, fuzzy, c-format
msgid "Preserve case"
msgstr "Preferencias"

#: standalone/draksambashare:83
#, fuzzy, c-format
msgid "Force create mode"
msgstr "Modelo de impresora"

#: standalone/draksambashare:84
#, fuzzy, c-format
msgid "Force group"
msgstr "Grupo PFS"

#: standalone/draksambashare:85 standalone/draksambashare:147
#, fuzzy, c-format
msgid "Default case"
msgstr "Usuario por omisión"

#: standalone/draksambashare:100
#, c-format
msgid "Printer name"
msgstr "Nome de impresora"

#: standalone/draksambashare:104 standalone/draksambashare:600
#, c-format
msgid "Printable"
msgstr "Imprimible"

#: standalone/draksambashare:105
#, c-format
msgid "Print Command"
msgstr "Comando de Impresión"

#: standalone/draksambashare:106
#, c-format
msgid "LPQ command"
msgstr "Comando LPQ"

#: standalone/draksambashare:107
#, c-format
msgid "Guest ok"
msgstr ""

#: standalone/draksambashare:110 standalone/draksambashare:151
#: standalone/draksambashare:609
#, c-format
msgid "Inherit permissions"
msgstr "Herdar permisos"

#: standalone/draksambashare:112
#, c-format
msgid "Create mode"
msgstr "Modo de creación"

#: standalone/draksambashare:113
#, c-format
msgid "Use client driver"
msgstr "Usar o driver do cliente"

#: standalone/draksambashare:139
#, c-format
msgid "Read List"
msgstr "Lista de Lectura"

#: standalone/draksambashare:140
#, c-format
msgid "Write List"
msgstr "Lista de Escritura"

#: standalone/draksambashare:145
#, fuzzy, c-format
msgid "Force Group"
msgstr "Grupo"

#: standalone/draksambashare:146
#, c-format
msgid "Force create group"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid "About Draksambashare"
msgstr "Acerca de Draksambashare"

#: standalone/draksambashare:166
#, c-format
msgid ""
"Mandriva Linux \n"
"Release: %s\n"
"Author: Antoine Ginies\n"
"\n"
"This is a simple tool to easily manage Samba configuration."
msgstr ""
"Mandriva Linux \n"
"Versión: %s\n"
"Autor: Antoine Ginies\n"
"\n"
"Esta é unha ferramenta simple para administrar de maneira sinxela a "
"configuración de Samba."

#: standalone/draksambashare:186
#, c-format
msgid "Samba server"
msgstr "Servidor Samba"

#: standalone/draksambashare:186
#, c-format
msgid "Restarting/Reloading Samba server..."
msgstr "Reiniciando/Recargando o servidor Samba..."

#: standalone/draksambashare:187
#, c-format
msgid "Error Restarting/Reloading Samba server"
msgstr "Erro ó Reiniciar/Recargar o servidor Samba"

#: standalone/draksambashare:373
#, c-format
msgid "Add a Samba share"
msgstr "Engadir un recurso de Samba"

#: standalone/draksambashare:376
#, c-format
msgid "Goal of this wizard is to easily create a new Samba share."
msgstr ""
"A meta deste asistente é crear dunha maneira sinxela un novo recurso Samba."

#: standalone/draksambashare:378
#, c-format
msgid "Name of the share:"
msgstr "Nome do recurso:"

#: standalone/draksambashare:379 standalone/draksambashare:593
#: standalone/draksambashare:774
#, c-format
msgid "Comment:"
msgstr "Comentario:"

#: standalone/draksambashare:380
#, c-format
msgid "Path:"
msgstr "Ruta:"

#: standalone/draksambashare:385
#, c-format
msgid ""
"Share with the same name already exist or share name empty, please choose "
"another name."
msgstr ""
"Xa existe un recurso con este nome ou o nome está baleiro, escolla outro "
"nome."

#: standalone/draksambashare:389 standalone/draksambashare:395
#, c-format
msgid "Can't create the directory, please enter a correct path."
msgstr "Non se puido crear o directorio, introduza unha ruta correcta."

#: standalone/draksambashare:392 standalone/draksambashare:629
#: standalone/draksambashare:796
#, c-format
msgid "Please enter a Comment for this share."
msgstr "Introduza un Comentario para este recurso."

#: standalone/draksambashare:423
#, c-format
msgid ""
"The wizard successfully added the Samba share. Now just double click on it "
"in treeview to modify it"
msgstr ""

#: standalone/draksambashare:439
#, c-format
msgid "pdf-gen - a PDF generator"
msgstr "pdf-gen - un xerador de PDF"

#: standalone/draksambashare:440
#, c-format
msgid "printers - all printers available"
msgstr "printers - tódalas impresoras dispoñibles"

#: standalone/draksambashare:444
#, c-format
msgid "Add Special Printer share"
msgstr ""

#: standalone/draksambashare:447
#, c-format
msgid ""
"Goal of this wizard is to easily create a new special printer Samba share."
msgstr ""

#: standalone/draksambashare:455
#, c-format
msgid "A PDF generator already exists."
msgstr "Xa existe un xerador de PDF."

#: standalone/draksambashare:479
#, c-format
msgid "Printers and print$ already exist."
msgstr "Printers e print$ xa existen."

#: standalone/draksambashare:530
#, c-format
msgid "The wizard successfully added the printer Samba share"
msgstr ""

#: standalone/draksambashare:553
#, c-format
msgid "Please add or select a Samba printer share to be able to modify it."
msgstr ""

#: standalone/draksambashare:589
#, c-format
msgid "Printer share"
msgstr "Recurso printer"

#: standalone/draksambashare:592
#, c-format
msgid "Printer name:"
msgstr "Nome da impresora:"

#: standalone/draksambashare:598 standalone/draksambashare:779
#, fuzzy, c-format
msgid "Writable:"
msgstr "Escritura"

#: standalone/draksambashare:599 standalone/draksambashare:780
#, fuzzy, c-format
msgid "Browseable:"
msgstr "Explorar"

#: standalone/draksambashare:604
#, c-format
msgid "Advanced options"
msgstr "Opcións avanzadas"

#: standalone/draksambashare:606
#, c-format
msgid "Printer access"
msgstr ""

#: standalone/draksambashare:610
#, c-format
msgid "Guest ok:"
msgstr ""

#: standalone/draksambashare:611
#, c-format
msgid "Create mode:"
msgstr "Modo de creación:"

#: standalone/draksambashare:615
#, c-format
msgid "Printer command"
msgstr ""

#: standalone/draksambashare:617
#, c-format
msgid "Print command:"
msgstr "Comando de impresión:"

#: standalone/draksambashare:618
#, c-format
msgid "LPQ command:"
msgstr "Comando LPQ:"

#: standalone/draksambashare:619
#, c-format
msgid "Printing:"
msgstr ""

#: standalone/draksambashare:635
#, c-format
msgid "create mode should be numeric. ie: 0755."
msgstr "o modo de creación debe ser numérico. p.ex: 0755."

#: standalone/draksambashare:697
#, c-format
msgid "DrakSamba entry"
msgstr "entrada DrakSamba"

#: standalone/draksambashare:702
#, c-format
msgid "Please add or select a Samba share to be able to modify it."
msgstr "Engada ou seleccione un recurso Samba para podelo modificar."

#: standalone/draksambashare:725
#, fuzzy, c-format
msgid "Samba user access"
msgstr "Servidor Samba"

#: standalone/draksambashare:733
#, fuzzy, c-format
msgid "Mask options"
msgstr "Opcións básicas"

#: standalone/draksambashare:747
#, fuzzy, c-format
msgid "Display options"
msgstr "Especifica-las opcións"

#: standalone/draksambashare:769
#, fuzzy, c-format
msgid "Samba share directory"
msgstr "Non existe tal directorio"

#: standalone/draksambashare:772
#, c-format
msgid "Share name:"
msgstr "Nome de recurso:"

#: standalone/draksambashare:778
#, c-format
msgid "Public:"
msgstr "Público:"

#: standalone/draksambashare:802
#, c-format
msgid ""
"Create mask, create mode and directory mask should be numeric. ie: 0755."
msgstr ""
"A máscara de creación, o modo de creación e a máscara do directorio deben "
"ser numéricos. p.ex: 0755."

#: standalone/draksambashare:809
#, c-format
msgid "Please create this Samba user: %s"
msgstr "Por favor, cree este usuario de Samba: %s"

#: standalone/draksambashare:932
#, c-format
msgid "User information"
msgstr "Información de usuario"

#: standalone/draksambashare:934
#, c-format
msgid "User name:"
msgstr "Nome de usuario:"

#: standalone/draksambashare:935 standalone/harddrake2:601
#, c-format
msgid "Password:"
msgstr "Contrasinal:"

#: standalone/draksambashare:1135
#, c-format
msgid "Failed to add Samba share."
msgstr "Erro ó engadir o recurso Samba."

#: standalone/draksambashare:1144
#, c-format
msgid "Failed to Modify Samba share."
msgstr "Erro ó Modificar o recurso Samba."

#: standalone/draksambashare:1153
#, c-format
msgid "Failed to remove a Samba share."
msgstr "Erro ó eliminar o recurso Samba."

#: standalone/draksambashare:1160
#, c-format
msgid "File share"
msgstr ""

#: standalone/draksambashare:1168
#, c-format
msgid "Add printers"
msgstr "Engadir impresoras"

#: standalone/draksambashare:1174
#, c-format
msgid "Failed to add printers."
msgstr "Erro ó engadir impresoras."

#: standalone/draksambashare:1183
#, c-format
msgid "Failed to Modify."
msgstr "Erro ó Modificar."

#: standalone/draksambashare:1192
#, c-format
msgid "Failed to remove."
msgstr "Erro ó eliminar."

#: standalone/draksambashare:1199
#, c-format
msgid "Printers"
msgstr "Impresoras"

#: standalone/draksambashare:1207
#, c-format
msgid "Change password"
msgstr "Cambiar contrasinal"

#: standalone/draksambashare:1212
#, c-format
msgid "Failed to change user password."
msgstr "Erro ó cambiar o contrasinal do usuario."

#: standalone/draksambashare:1220
#, c-format
msgid "Failed to add user."
msgstr "Erro ó engadir o usuario."

#: standalone/draksambashare:1223
#, c-format
msgid "Delete user"
msgstr "Eliminar usuario"

#: standalone/draksambashare:1232
#, c-format
msgid "Failed to delete user."
msgstr "Erro ó eliminar o usuario."

#: standalone/draksambashare:1244
#, c-format
msgid "Samba Users"
msgstr "Usuarios de Samba"

#: standalone/draksambashare:1253
#, c-format
msgid "DrakSamba manage Samba shares"
msgstr "DrakSamba administra os recursos Samba"

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr "TODO"

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr "LOCAL"

#: standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "NINGÚN"

#: standalone/draksec:53 standalone/net_applet:480
#, c-format
msgid "Ignore"
msgstr "Ignorar"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:103
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:156 standalone/harddrake2:208
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Descrición dos campos:\n"
"\n"

#: standalone/draksec:170
#, c-format
msgid "(default value: %s)"
msgstr "(valor por defecto: %s)"

#: standalone/draksec:212
#, c-format
msgid "Security Level:"
msgstr "Nivel de Seguridade:"

#: standalone/draksec:219
#, c-format
msgid "Security Administrator:"
msgstr "Administrador de Seguridade:"

#: standalone/draksec:221
#, c-format
msgid "Basic options"
msgstr "Opcións básicas"

#: standalone/draksec:235
#, c-format
msgid "Network Options"
msgstr "Opcións de Rede"

#: standalone/draksec:235
#, c-format
msgid "System Options"
msgstr "Opcións do Sistema"

#: standalone/draksec:270
#, c-format
msgid "Periodic Checks"
msgstr "Comprobacións Periódicas"

#: standalone/draksec:300
#, c-format
msgid "Please wait, setting security level..."
msgstr "Agarde, establecendo o nivel de seguridade..."

#: standalone/draksec:306
#, c-format
msgid "Please wait, setting security options..."
msgstr "Agarde, establecendo as opcións de seguridade..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "¡Non se detectou ningunha Tarxeta de Son!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""
"Non se detectou ningunha Tarxeta de Son na máquina. Verifique que hai "
"unhaTarxeta de Son soportada por Linux conectada correctamente.\n"
"\n"
"\n"
"Pode visita-la nosa base de datos de hardware en:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Nota: se ten unha tarxeta de son ISA PnP, terá que usar os programas "
"alsaconf ou sndconfig.  Simplemente escriba \"alsaconf\" ou \"sndconfig\" "
"nunha consola."

#: standalone/draksplash:30
#, c-format
msgid "x coordinate of text box"
msgstr "coordenada x da caixa de texto"

#: standalone/draksplash:31
#, c-format
msgid "y coordinate of text box"
msgstr "coordenada y da caixa de texto"

#: standalone/draksplash:32
#, c-format
msgid "text box width"
msgstr "ancho da caixa de texto"

#: standalone/draksplash:33
#, c-format
msgid "text box height"
msgstr "altura da caixa de texto"

#: standalone/draksplash:34
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:35
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:36
#, c-format
msgid "the width of the progress bar"
msgstr "o ancho da barra de progreso"

#: standalone/draksplash:37
#, c-format
msgid "the height of the progress bar"
msgstr "a altura da barra de progreso"

#: standalone/draksplash:38
#, c-format
msgid "x coordinate of the text"
msgstr "coordenada x do texto"

#: standalone/draksplash:39
#, c-format
msgid "y coordinate of the text"
msgstr "coordenada y do texto"

#: standalone/draksplash:40
#, c-format
msgid "text box transparency"
msgstr "transparencia da caixa de texto"

#: standalone/draksplash:41
#, c-format
msgid "progress box transparency"
msgstr "transparencia da barra de progreso"

#: standalone/draksplash:42
#, c-format
msgid "text size"
msgstr "tamaño do texto"

#: standalone/draksplash:59
#, c-format
msgid "Choose progress bar color 1"
msgstr "Escolla a cor 1 da barra de progreso"

#: standalone/draksplash:60
#, c-format
msgid "Choose progress bar color 2"
msgstr "Escolla a cor 2 da barra de progreso"

#: standalone/draksplash:61
#, c-format
msgid "Choose progress bar background"
msgstr "Elixa o fondo da barra de progreso"

#: standalone/draksplash:62
#, c-format
msgid "Gradient type"
msgstr "Tipo de gradiente"

#: standalone/draksplash:63
#, c-format
msgid "Choose text color"
msgstr "Elixa a cor do texto"

#: standalone/draksplash:65 standalone/draksplash:72
#, c-format
msgid "Choose picture"
msgstr "Elixa a imaxe"

#: standalone/draksplash:66
#, c-format
msgid "Silent bootsplash"
msgstr ""

#: standalone/draksplash:69
#, c-format
msgid "Choose text zone color"
msgstr ""

#: standalone/draksplash:70
#, c-format
msgid "Text color"
msgstr "Cor do texto"

#: standalone/draksplash:71
#, c-format
msgid "Background color"
msgstr "Cor do fondo"

#: standalone/draksplash:73
#, c-format
msgid "Verbose bootsplash"
msgstr "bootsplash detallado"

#: standalone/draksplash:75
#, c-format
msgid "Display logo on Console"
msgstr "Amosa-lo logo na Consola"

#: standalone/draksplash:78
#, c-format
msgid "Console bootsplash"
msgstr ""

#: standalone/draksplash:84
#, c-format
msgid "Theme name"
msgstr "Nome do tema"

#: standalone/draksplash:87
#, c-format
msgid "final resolution"
msgstr "resolución final"

#: standalone/draksplash:92
#, c-format
msgid "Save theme"
msgstr "Garda-lo tema"

#: standalone/draksplash:153
#, c-format
msgid "saving Bootsplash theme..."
msgstr "gardando o tema de Bootsplash..."

#: standalone/draksplash:162
#, c-format
msgid "Unable to load image file %s"
msgstr "Non foi posible cargar o ficheiro de imaxes %s"

#: standalone/draksplash:173
#, c-format
msgid "choose image"
msgstr "Escolle-la imaxe"

#: standalone/draksplash:188
#, c-format
msgid "Color selection"
msgstr "Selección de cores"

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr "Conectado a través dun porto serie ou un cable usb"

#: standalone/drakups:80
#, c-format
msgid "Add an UPS device"
msgstr "Engadir un dispositivo SAI"

#: standalone/drakups:83
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"Benvid@ á utilidade de configuración de SAI.\n"
"\n"
"Aqui poderá engadir un novo SAI ó seu sistema.\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""
"Imos engadir un dispositivo SAI.\n"
"\n"
"Prefire detectar automáticamente os dispositivos SAI conectados a esta "
"máquina ou desexa seleccionalos a man?"

#: standalone/drakups:93
#, c-format
msgid "Autodetection"
msgstr "Detección automática"

#: standalone/drakups:101 standalone/harddrake2:376
#, c-format
msgid "Detection in progress"
msgstr "Detectando"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr "O asistente engadiu con éxito os seguintes dispositivos SAI:"

#: standalone/drakups:123
#, c-format
msgid "No new UPS devices was found"
msgstr "Non se atoparon novos dispositivos SAI"

#: standalone/drakups:128 standalone/drakups:140
#, c-format
msgid "UPS driver configuration"
msgstr "Configuración do driver SAI"

#: standalone/drakups:128
#, c-format
msgid "Please select your UPS model."
msgstr "Seleccione o modelo do seu SAI."

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr "Fabricante / Modelo:"

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""
"Estamos configurando o SAI \"%s\" dende \"%s\".\n"
"Introduza o seu nome, o seu controlador e o seu porto."

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "Nome:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr "O nome do seu SAI"

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr "O driver que xestiona o seu SAI"

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "Porto:"

#: standalone/drakups:149
#, c-format
msgid "The port on which is connected your ups"
msgstr "O porto ó que está conectado o seu SAI"

#: standalone/drakups:159
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr "O asistente configurou con éxito o novo dispositivo SAI \"%s\"."

#: standalone/drakups:250
#, c-format
msgid "UPS devices"
msgstr "Dispositivos SAI"

#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "Nome"

#: standalone/drakups:269
#, c-format
msgid "UPS users"
msgstr "Usuarios SAI"

#: standalone/drakups:285
#, c-format
msgid "Access Control Lists"
msgstr "Listas de Control de Acceso"

#: standalone/drakups:286
#, c-format
msgid "IP mask"
msgstr "Máscara IP"

#: standalone/drakups:298
#, c-format
msgid "Rules"
msgstr "Regras"

#: standalone/drakups:299
#, c-format
msgid "Action"
msgstr "Acción"

#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "Nivel"

#: standalone/drakups:299
#, c-format
msgid "ACL name"
msgstr "Nome da ACL"

#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
#, c-format
msgid "DrakUPS"
msgstr "DrakUPS"

#: standalone/drakups:339
#, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Benvid@ ás ferramentas de configuración de SAI"

#: standalone/drakvpn:73
#, c-format
msgid "DrakVPN"
msgstr "DrakVPN"

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr "A conexión VPN está activada."

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Xa se configurou unha conexión VPN.\n"
"\n"
"Agora mesmo está activada.\n"
"\n"
"Que desexa facer?"

#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "desactivar"

#: standalone/drakvpn:101 standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "volver a configurar"

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr ""

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr "Desactivando VPN..."

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr "A conexión VPN está desactivada."

#: standalone/drakvpn:121
#, c-format
msgid "VPN connection currently disabled"
msgstr "A conexión VPN está desactivada"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Xa se configurou unha conexión VPN.\n"
"\n"
"Agora mesmo está desactivada.\n"
"\n"
"Que desexa facer?"

#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "activar"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr "Activando VPN..."

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr "A conexión VPN está activada."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr "Configuración sinxela de VPN."

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""
"Conexión VPN.\n"
"\n"
"Este programa está baseado nos seguintes proxectos:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - os documentos e as páxinas man veñen co paquete %s\n"
"\n"
"Lea COMO MÍNIMO os documentos de ipsec-howto\n"
"antes de continuar."

#: standalone/drakvpn:196
#, c-format
msgid "Kernel module."
msgstr "Módulo do kernel."

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""
"O kernel ten que ter soporte ipsec.\n"
"\n"
"Está executando a versión %s do kernel.\n"
"\n"
"Este kernel ten soporte '%s'."

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr "Problemas ó instala-lo paquete %s"

#: standalone/drakvpn:278
#, c-format
msgid "Security Policies"
msgstr "Políticas de Seguridade"

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:281 standalone/drakvpn:292
#, c-format
msgid "Configuration file"
msgstr "Ficheiro de configuración"

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""
"Agora, imos configura-lo ficheiro %s.\n"
"\n"
"\n"
"Prema en Seguinte.\n"

#: standalone/drakvpn:311 standalone/drakvpn:671
#, c-format
msgid "%s entries"
msgstr "%s entradas"

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""
"O contido do ficheiro %s\n"
"está dividido en seccións.\n"
"\n"
"Agora pode:\n"
"\n"
"  - ver, engadir, editar, ou eliminar seccións, e despois\n"
"  - gardar os cambios\n"
"\n"
"¿Qué desexa facer?\n"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "Ver"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Commit"
msgstr "Gardar"

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "Ve-la configuración"

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""
"O ficheiro %s non existe.\n"
"\n"
"Isto debe ser unha nova configuración.\n"
"\n"
"Ten que voltar e escoller 'engadir'.\n"

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr "entradas de ipsec.conf"

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "config setup"
msgstr "reconfigurar"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "conn %default"
msgstr "defecto"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "normal conn"
msgstr "Mostrar información"

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, c-format
msgid "Exists!"
msgstr "Existe!"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""
"Xa existe unha sección con este nome.\n"
"Os nomes das seccións deben se únicos.\n"
"\n"
"Ten que voltar e engadir outra sección\n"
"ou cambiarlle o nome.\n"

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:391
#, c-format
msgid "interfaces"
msgstr "interfaces"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr "klipsdebug"

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr "plutodebug"

#: standalone/drakvpn:394
#, c-format
msgid "plutoload"
msgstr "plutoload"

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr "plutostart"

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr "uniqueids"

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:437
#, c-format
msgid "PFS"
msgstr "PFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr "keyingtries"

#: standalone/drakvpn:439
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr "disablearrivalcheck"

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "left"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr "leftcert"

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr "leftrsasigkey"

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr "leftsubnet"

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr "leftnexthop"

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"O ficheiro %s ten varias seccións, ou conexións.\n"
"\n"
"Agora pode engadir unha nova sección.\n"
"Escolla continuar cando estea listo para escribir os datos.\n"

#: standalone/drakvpn:477
#, c-format
msgid "section name"
msgstr "nome da sección"

#: standalone/drakvpn:478
#, c-format
msgid "authby"
msgstr "authby"

#: standalone/drakvpn:479
#, c-format
msgid "auto"
msgstr "auto"

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr "right"

#: standalone/drakvpn:486
#, c-format
msgid "rightcert"
msgstr "rightcert"

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr "rightrsasigkey"

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr "rightsubnet"

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr "rightnexthop"

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""
"Xa existe unha sección con este nome.\n"
"Os nomes das seccións deben ser únicos.\n"
"\n"
"Ten que voltar e engadir outra sección\n"
"ou cambia-lo nome da sección.\n"

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Engadir unha Política de Seguridade.\n"
"\n"
"Agora pode engadir unha Política de Seguridade.\n"
"\n"
"Escolla continuar cando estea preparado para escribir os datos.\n"

#: standalone/drakvpn:562 standalone/drakvpn:812
#, c-format
msgid "Edit section"
msgstr "Edita-la sección"

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""
"O ficheiro %s ten varias seccións ou conexións.\n"
"\n"
"Pode escoller debaixo a que quere editar\n"
"e despois premer en seguinte.\n"

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, c-format
msgid "Section names"
msgstr "Nomes das seccións"

#: standalone/drakvpn:576
#, c-format
msgid "Can not edit!"
msgstr "¡ Non se pode editar !"

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Editar unha Política de Seguridade.\n"
"\n"
"Agora pode editar unha Política de Seguridade.\n"
"\n"
"Escolla continuar cando estea preparad@ para escribir os datos.\n"

#: standalone/drakvpn:642 standalone/drakvpn:859
#, c-format
msgid "Remove section"
msgstr "Eliminar sección"

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""
"O ficheiro %s ten varias seccións ou conexións.\n"
"\n"
"Pode escoller debaixo a que desexa eliminar\n"
"e despois premer en seguinte.\n"

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""
"Configuración do ficheiro racoon.conf.\n"
"\n"
"O contido deste ficheiro está dividido en seccións.\n"
"Agora pode:\n"
"  - ver \t\t (ve-lo contido do ficheiro)\n"
"  - engadir\t\t\t (engadir unha sección)\n"
"  - editar \t\t\t (modifica-los parámetros dunha sección)\n"
"  - eliminar \t\t (eliminar unha sección)\n"
"  - gardar \t\t (escribe os cambios no ficheiro real)"

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""
"O ficheiro %s non existe\n"
"\n"
"Isto debe ser unha nova configuración.\n"
"\n"
"Debe voltar e seleccionar configurar.\n"

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr "entradas de racoonf.conf"

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:721
#, c-format
msgid "path"
msgstr "ruta"

#: standalone/drakvpn:721
#, c-format
msgid "remote"
msgstr "remoto"

#: standalone/drakvpn:721
#, c-format
msgid "sainfo"
msgstr "sainfo"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:732
#, c-format
msgid "path type"
msgstr "tipo de ruta"

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:756 standalone/drakvpn:849
#, c-format
msgid "real file"
msgstr "ficheiro real"

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""
"O ficheiro %s ten varias seccións ou conexións.\n"
"\n"
"Pode escoller na lista de embaixo a que desexa\n"
"editar e despois premer en seguinte.\n"

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"O ficheiro %s ten varias seccións.\n"
"\n"
"\n"
"Agora pode editar as entradas da sección remote.\n"
"\n"
"Escolla continuar cando estea listo para escribir os datos.\n"

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""
"O ficheiro %s ten varias seccións.\n"
"\n"
"Agora pode editar as entradas da sección sainfo.\n"
"\n"
"Escolla continuar cando estea preparado para escribir os datos."

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:927
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Protocolo de arrinque"

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:960
#, c-format
msgid "Sainfo destination protocol"
msgstr ""

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr "Grupo PFS"

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:982
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "Número de teléfono"

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1019
#, c-format
msgid "Authentication algorithm"
msgstr "Algoritmo de autenticación"

#: standalone/drakvpn:1021
#, c-format
msgid "Compression algorithm"
msgstr "Algoritmo de compresión"

#: standalone/drakvpn:1022
#, fuzzy, c-format
msgid "deflate"
msgstr "defecto"

#: standalone/drakvpn:1029
#, c-format
msgid "Remote"
msgstr "Remoto"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1038
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "Modo de marcación"

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1046
#, c-format
msgid "Generate policy"
msgstr "Xerar política"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr "apagado"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "on"
msgstr "prendido"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1062
#, c-format
msgid "Passive"
msgstr "Pasivo"

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1067
#, c-format
msgid "Certificate type"
msgstr "Tipo de certificado"

#: standalone/drakvpn:1069
#, fuzzy, c-format
msgid "My certfile"
msgstr "Seleccione un ficheiro"

#: standalone/drakvpn:1070
#, c-format
msgid "Name of the certificate"
msgstr "Nome do certificado"

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr "A miña clave privada"

#: standalone/drakvpn:1072
#, c-format
msgid "Name of the private key"
msgstr "Nome da clave privada"

#: standalone/drakvpn:1073
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "Seleccione un ficheiro"

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1075
#, c-format
msgid "Verify cert"
msgstr "Verificar certificado"

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr "O meu identificador"

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1100
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "Impresora"

#: standalone/drakvpn:1101
#, fuzzy, c-format
msgid "Proposal"
msgstr "Protocolo"

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr "Algoritmo de hash"

#: standalone/drakvpn:1112
#, c-format
msgid "DH group"
msgstr "Grupo DH"

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "Comando"

#: standalone/drakvpn:1120
#, c-format
msgid "Source IP range"
msgstr "Rango de IPs de orixe"

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr "Rango de IPs de destino"

#: standalone/drakvpn:1122
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Protocolo de arrinque"

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, c-format
msgid "any"
msgstr "calquer"

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "Bandeira"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr "Dirección"

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr "Política IPsec"

#: standalone/drakvpn:1126
#, c-format
msgid "ipsec"
msgstr "ipsec"

#: standalone/drakvpn:1126
#, c-format
msgid "discard"
msgstr "descartar"

#: standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr "Modo"

#: standalone/drakvpn:1129
#, c-format
msgid "tunnel"
msgstr "túnel"

#: standalone/drakvpn:1129
#, c-format
msgid "transport"
msgstr "transportar"

#: standalone/drakvpn:1131
#, c-format
msgid "Source/destination"
msgstr "Fonte/destino"

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr "por defecto"

#: standalone/drakvpn:1132
#, c-format
msgid "use"
msgstr "usar"

#: standalone/drakvpn:1132
#, c-format
msgid "unique"
msgstr "único"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "USA (broadcast)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "USA (cable)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr ""

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "Canadá (cable)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "Xapón (broadcast)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "Xapón (cable)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "China (broadcast)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "Europa Occidental"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "Europa do Leste"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "Francia [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "Nova Celandia"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr "TV normal:"

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "Área:"

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr ""

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr ""

#: standalone/drakxtv:107
#, fuzzy, c-format
msgid "There was an error while scanning for TV channels"
msgstr "Houbo un erro ó instalar os paquetes:"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "¡Que teña un bo día!"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "¡Agora, pode executar xawtv (¡baixo X Window!) !\n"

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr "¡Non se detectou ningunha Tarxeta de TV!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""
"Non se detectou ningunha Tarxeta de TV na súa máquina. Verifique que hai "
"unha Tarxeta de Video/TV soportada por Linux conectada correctamente.\n"
"\n"
"\n"
"Pode visita-la nosa base de datos de hardware en:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"

#: standalone/harddrake2:25
#, c-format
msgid "Alternative drivers"
msgstr "Controladores alternativos"

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "a lista de controladores altenativos para esta tarxeta de son"

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
"isto é o bus físico onde está conectado o dispositivo (p.ex.: PCI, USB, ...)"

#: standalone/harddrake2:31 standalone/harddrake2:146
#, c-format
msgid "Bus identification"
msgstr "Identificación do bus"

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr "Capacidade da unidade"

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""
"capacidades especiais do driver (capacidade de gravación e ou soporte de DVD)"

#: standalone/harddrake2:39
#, c-format
msgid "this field describes the device"
msgstr "este campo describe o dispositivo"

#: standalone/harddrake2:40
#, c-format
msgid "Old device file"
msgstr "Ficheiro de dispositivo antigo"

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:42
#, c-format
msgid "New devfs device"
msgstr "Novo dispositivo devfs"

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "Módulo"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "o módulo do kernel GNU/Linux que xestiona o dispositivo"

#: standalone/harddrake2:47
#, c-format
msgid "Extended partitions"
msgstr "Particións extendidas"

#: standalone/harddrake2:47
#, c-format
msgid "the number of extended partitions"
msgstr "o número de particións extendidas"

#: standalone/harddrake2:48
#, c-format
msgid "Geometry"
msgstr "Xeometría"

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr "Xeometría Cilindros/Cabezas/Sectores do disco"

#: standalone/harddrake2:49
#, c-format
msgid "Disk controller"
msgstr "Controlador de disco"

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr "clase de dispositivo hardware"

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:224
#, c-format
msgid "Model"
msgstr "Modelo"

#: standalone/harddrake2:51
#, c-format
msgid "hard disk model"
msgstr "Modelo do disco duro"

#: standalone/harddrake2:52
#, c-format
msgid "network printer port"
msgstr "porto da impresora de rede"

#: standalone/harddrake2:53
#, c-format
msgid "Primary partitions"
msgstr "Particións primarias"

#: standalone/harddrake2:53
#, c-format
msgid "the number of the primary partitions"
msgstr "o número de particións primarias"

#: standalone/harddrake2:54
#, c-format
msgid "the vendor name of the device"
msgstr "o nome do vendedor do dispositivo"

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr "Bus PCI #"

#: standalone/harddrake2:55
#, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "o bus PCI onde está conectado o dispositivo"

#: standalone/harddrake2:56
#, c-format
msgid "PCI device #"
msgstr "Dispositivo PCI #"

#: standalone/harddrake2:56
#, c-format
msgid "PCI device number"
msgstr "Dispositivo PCI número"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr "Función PCI #"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function number"
msgstr "Función PCI número"

#: standalone/harddrake2:58
#, c-format
msgid "Vendor ID"
msgstr "ID do vendedor"

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr "isto é o identificador numérico estándar do vendedor"

#: standalone/harddrake2:59
#, c-format
msgid "Device ID"
msgstr "ID do dispositivo "

#: standalone/harddrake2:59
#, c-format
msgid "this is the numerical identifier of the device"
msgstr "isto é identificador numérico do dispositivo"

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr "ID de subvendedor"

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "Dispositivos UPS"

#: standalone/harddrake2:61
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "este é o identificador numérico menor do dispositivo"

#: standalone/harddrake2:62
#, c-format
msgid "Device USB ID"
msgstr "ID do dispositivo USB "

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ".."

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:67
#, c-format
msgid "Cache size"
msgstr "Tamaño da caché"

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "tamaño da caché segundo nivel da cpu (L2)"

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr "Erro da coma"

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "familia da cpu (p.ex.: 6 para a clase i686)"

#: standalone/harddrake2:72
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "Establecendo o nivel de seguridade"

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr "Frecuencia (MHz)"

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"a frecuencia da CPU en MHz (Megahertzio é máis ou menos o número de "
"instruccións que pode executa-la cpu por segundo)"

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr "Opcións"

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr "Erro fdiv"

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr "Ten FPU"

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "si significa que o procesador ten un coprocesador aritmético"

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr "Erro f00f"

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr "Erro de apagado"

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr "subxeración da cpu"

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr "xeración da cpu (p.ex: 8 para Pentium III, ...)"

#: standalone/harddrake2:84
#, c-format
msgid "Model name"
msgstr "Nome do modelo"

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr "nome do vendedor oficial da cpu"

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr "o nome da CPU"

#: standalone/harddrake2:86
#, c-format
msgid "Processor ID"
msgstr "ID do procesador"

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr "o número do procesador"

#: standalone/harddrake2:87
#, fuzzy, c-format
msgid "Model stepping"
msgstr "Formatando"

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr "o nome do vendedor do procesador"

#: standalone/harddrake2:89
#, c-format
msgid "Write protection"
msgstr "Protección contra a escritura"

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:93
#, c-format
msgid "Floppy format"
msgstr "Formatao dos disquetes"

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr "formatos dos disquetes soportados pola unidade"

#: standalone/harddrake2:97
#, c-format
msgid "Channel"
msgstr "Canle"

#: standalone/harddrake2:97
#, c-format
msgid "EIDE/SCSI channel"
msgstr "Canle EIDE/SCSI"

#: standalone/harddrake2:98
#, c-format
msgid "Disk identifier"
msgstr "Identificador de disco"

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr "normalmente o número de serie do disco"

#: standalone/harddrake2:99
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "Nome do volume lóxico "

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, c-format
msgid "Installed size"
msgstr "Tamaño instalado"

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr "Tamaño instalado do banco de memoria"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled Size"
msgstr "Tamaño Dispoñible"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr "Tamaño dispoñible no banco de memoria"

#: standalone/harddrake2:108
#, c-format
msgid "type of the memory device"
msgstr "tipo do dispositivo de memoria"

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr "Velocidade"

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr "Velocidade do banco de memoria"

#: standalone/harddrake2:110
#, fuzzy, c-format
msgid "Bank connections"
msgstr "Xestiona-las conexións"

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:115
#, c-format
msgid "Device file"
msgstr "Ficheiro de dispositivo"

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""
"o ficheiro de dispositivo que se usa para comunicar co driver do kernel para "
"o rato"

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr "Roda emulada"

#: standalone/harddrake2:116
#, c-format
msgid "whether the wheel is emulated or not"
msgstr "con emulación da roda"

#: standalone/harddrake2:117
#, c-format
msgid "the type of the mouse"
msgstr "o tipo de rato"

#: standalone/harddrake2:118
#, c-format
msgid "the name of the mouse"
msgstr "o nome do rato"

#: standalone/harddrake2:119
#, c-format
msgid "Number of buttons"
msgstr "Número de botóns"

#: standalone/harddrake2:119
#, c-format
msgid "the number of buttons the mouse has"
msgstr "o número de botóns que ten o rato"

#: standalone/harddrake2:120
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "o tipo de bus ó que está conectado o rato"

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr "Protocolo de rato que usa X11"

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr "o protocolo que o escritorio gráfico usa co rato"

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:342
#, c-format
msgid "Identification"
msgstr "Identificación"

#: standalone/harddrake2:129 standalone/harddrake2:145
#, c-format
msgid "Connection"
msgstr "Conexión"

#: standalone/harddrake2:138
#, fuzzy, c-format
msgid "Performances"
msgstr "Preferencias"

#: standalone/harddrake2:139
#, c-format
msgid "Bugs"
msgstr "Erros"

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr "FPU"

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "Dispositivo"

#: standalone/harddrake2:148
#, c-format
msgid "Partitions"
msgstr "Particións"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr "Funcionalidades"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:146 standalone/printerdrake:159
#: standalone/printerdrake:171
#, c-format
msgid "/_Options"
msgstr "/_Opcións"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:172 standalone/printerdrake:174
#: standalone/printerdrake:177 standalone/printerdrake:179
#, c-format
msgid "/_Help"
msgstr "/A_xuda"

#: standalone/harddrake2:181
#, c-format
msgid "/Autodetect _printers"
msgstr "/Detectar automáticamente as im_presoras"

#: standalone/harddrake2:182
#, c-format
msgid "/Autodetect _modems"
msgstr "/Detectar automáticamente os _módems"

#: standalone/harddrake2:183
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Detectar automáticamente as unidades _jazz"

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr ""

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr "/_Actualizar a lista de hardware"

#: standalone/harddrake2:192 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/_Saír"

#: standalone/harddrake2:205
#, c-format
msgid "/_Fields description"
msgstr "/Descrición _dos campos"

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr "Axuda do Harddrake"

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"Cando seleccione un dispositivo, poderá ve-la información do dispositivo nos "
"campos do marco (\"Información\") da dereita"

#: standalone/harddrake2:222 standalone/printerdrake:177
#, c-format
msgid "/_Report Bug"
msgstr "/_Comunicar Erro"

#: standalone/harddrake2:224 standalone/printerdrake:179
#, c-format
msgid "/_About..."
msgstr "/_Acerca de..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr "Acerca de Harddrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""
"Isto é o HardDrake, unha ferramenta de configuración de hardware de %s.\n"
"<span foreground=\"royalblue3\">Versión:</span> %s\n"
"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"

#: standalone/harddrake2:243
#, c-format
msgid "Harddrake2"
msgstr "Harddrake2"

#: standalone/harddrake2:273
#, c-format
msgid "Detected hardware"
msgstr "Hardware detectado"

#: standalone/harddrake2:278
#, c-format
msgid "Configure module"
msgstr "Configura-lo módulo"

#: standalone/harddrake2:285
#, c-format
msgid "Run config tool"
msgstr "Executa-la ferramenta de configuración"

#: standalone/harddrake2:309
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""
"Clique nun dispositivo na árbore da esquerda para amosa-la súa información "
"aquí."

#: standalone/harddrake2:330 standalone/printerdrake:306
#: standalone/printerdrake:320
#, c-format
msgid "Unknown"
msgstr "Descoñecido"

#: standalone/harddrake2:350
#, c-format
msgid "Misc"
msgstr "Miscelánea"

#: standalone/harddrake2:428
#, c-format
msgid "secondary"
msgstr "secundario"

#: standalone/harddrake2:428
#, c-format
msgid "primary"
msgstr "primario"

#: standalone/harddrake2:432
#, c-format
msgid "burner"
msgstr "gravadora"

#: standalone/harddrake2:432
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:512
#, c-format
msgid ""
"The following devices needs proprietary drivers or firmwares in order to "
"operate smoothly. The appropriate packages can be retrieved from the "
"Mandriva Club. Do you want to subscribe to the Mandriva Club?"
msgstr ""

#: standalone/harddrake2:595 standalone/harddrake2:598
#, c-format
msgid "Upload the hardware list"
msgstr "Actualizar a lista de hardware"

#: standalone/harddrake2:600
#, c-format
msgid "Account:"
msgstr "Conta:"

#: standalone/harddrake2:602
#, c-format
msgid "Hostname:"
msgstr "Nome de máquina:"

#: standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Escolla a disposición do seu teclado."

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "¿Quere que a tecla de Retroceso devolva Suprimir na consola?"

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "LocaleDrake"

#: standalone/localedrake:44
#, c-format
msgid "You should install the following packages: %s"
msgstr "Debe instalar os seguintes paquetes: %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: standalone/localedrake:47 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: standalone/localedrake:55
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "Xa se fixo o cambio, pero para que sexa efectivo debe saír do sistema"

#: standalone/logdrake:49
#, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "Ferramentas de Logs de Mandriva Linux"

#: standalone/logdrake:50
#, c-format
msgid "Logdrake"
msgstr "Logdrake"

#: standalone/logdrake:63
#, c-format
msgid "Show only for the selected day"
msgstr "Amosar só do día seleccionado"

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr "/Ficheiro/_Novo"

#: standalone/logdrake:70
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr "/Ficheiro/_Abrir"

#: standalone/logdrake:71
#, c-format
msgid "<control>O"
msgstr "<control>A"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr "/Ficheiro/_Gardar"

#: standalone/logdrake:72
#, c-format
msgid "<control>S"
msgstr "<control>G"

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr "/Ficheiro/Gardar _Coma"

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/Ficheiro/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr "/Opcións/Proba"

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/Axuda/_Acerca de..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr "Autenticación"

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr "Usuario"

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr "Mensaxes"

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr "Syslog"

#: standalone/logdrake:115
#, c-format
msgid "search"
msgstr "buscar"

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr "Unha ferramenta para monitoriza-los seus logs"

#: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93
#, c-format
msgid "Settings"
msgstr "Opcións"

#: standalone/logdrake:133
#, fuzzy, c-format
msgid "Matching"
msgstr "Máquina:"

#: standalone/logdrake:134
#, fuzzy, c-format
msgid "but not matching"
msgstr "Máquina:"

#: standalone/logdrake:138
#, c-format
msgid "Choose file"
msgstr "Seleccionar ficheiro"

#: standalone/logdrake:150
#, c-format
msgid "Calendar"
msgstr "Calendario"

#: standalone/logdrake:160
#, c-format
msgid "Content of the file"
msgstr "Contido do ficheiro"

#: standalone/logdrake:164 standalone/logdrake:402
#, c-format
msgid "Mail alert"
msgstr "Alerta de correo"

#: standalone/logdrake:171
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr "O asistente de alertas fallou inesperadamente:"

#: standalone/logdrake:224
#, c-format
msgid "please wait, parsing file: %s"
msgstr "agarde, analisando o ficheiro: %s"

#: standalone/logdrake:379
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Servidor World Wide Web Apache"

#: standalone/logdrake:380
#, fuzzy, c-format
msgid "Domain Name Resolver"
msgstr "Nome de dominio"

#: standalone/logdrake:381
#, c-format
msgid "Ftp Server"
msgstr "Servidor FTP"

#: standalone/logdrake:382
#, c-format
msgid "Postfix Mail Server"
msgstr "Servidor de Correo Postfix"

#: standalone/logdrake:383
#, c-format
msgid "Samba Server"
msgstr "Servidor Samba"

#: standalone/logdrake:385
#, c-format
msgid "Webmin Service"
msgstr "Servicio Webmin"

#: standalone/logdrake:386
#, c-format
msgid "Xinetd Service"
msgstr "Servicio Xinetd"

#: standalone/logdrake:397
#, c-format
msgid "Configure the mail alert system"
msgstr "Configura-lo sistema de alertas de correo"

#: standalone/logdrake:398
#, c-format
msgid "Stop the mail alert system"
msgstr "Para-lo sistema de alertas de correo"

#: standalone/logdrake:405
#, c-format
msgid "Mail alert configuration"
msgstr "Configuración de alertas de correo"

#: standalone/logdrake:406
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Benvid@ á utilidade de configuración de correo.\n"
"\n"
"Aquí, poderá configura-lo sistema de alertas.\n"

#: standalone/logdrake:416
#, c-format
msgid "Services settings"
msgstr "Configuración dos servicios"

#: standalone/logdrake:417
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Load setting"
msgstr "Formatando"

#: standalone/logdrake:425
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Recibirá unha alerta se a carga é maior ca este valor"

#: standalone/logdrake:426
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr "Carga"

#: standalone/logdrake:431
#, c-format
msgid "Alert configuration"
msgstr "Configuración de alertas"

#: standalone/logdrake:432
#, c-format
msgid "Please enter your email address below "
msgstr "Introduza o seu enderezo de correo-e embaixo "

#: standalone/logdrake:433
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr "e introduza o nome (ou o IP) do servidor SMTP que desexa usar"

#: standalone/logdrake:452
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr "O asistente configurou con éxito a alerta de correo."

#: standalone/logdrake:458
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr "O asistente desactivou con é a alerta de correo."

#: standalone/logdrake:517
#, c-format
msgid "Save as.."
msgstr "Gardar coma..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "Escolla o seu tipo de rato."

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "¿Emula-lo terceiro botón?"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "Proba-lo rato"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "Probe o seu rato:"

#: standalone/net_applet:47
#, c-format
msgid "Network is up on interface %s"
msgstr "A rede está activada na interface %s"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr ""
"A rede está desactivada na interface %s. Clique en \"Configura-la Rede\""

#: standalone/net_applet:56 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Connect %s"
msgstr "Conectar %s"

#: standalone/net_applet:57 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Disconnect %s"
msgstr "Desconectar %s"

#: standalone/net_applet:58
#, c-format
msgid "Monitor Network"
msgstr "Monitorizar a Rede"

#: standalone/net_applet:60
#, c-format
msgid "Manage wireless networks"
msgstr "Administrar redes sen fíos"

#: standalone/net_applet:61
#, c-format
msgid "Configure Network"
msgstr "Configura-la Rede"

#: standalone/net_applet:63
#, fuzzy, c-format
msgid "Watched interface"
msgstr "interfaces"

#: standalone/net_applet:93
#, c-format
msgid "Profiles"
msgstr "Perfís"

#: standalone/net_applet:102
#, c-format
msgid "Get Online Help"
msgstr "Conseguir Axuda en Liña"

#: standalone/net_applet:335
#, c-format
msgid "Interactive Firewall automatic mode"
msgstr ""

#: standalone/net_applet:340
#, c-format
msgid "Always launch on startup"
msgstr "Lanzar sempre ó inicia-lo sistema"

#: standalone/net_applet:344
#, c-format
msgid "Wireless networks"
msgstr "Redes sen fíos"

#: standalone/net_applet:429
#, c-format
msgid "Interactive Firewall: intrusion detected"
msgstr "Cortalumes Interactivo: detectouse unha intrusión"

#: standalone/net_applet:442
#, c-format
msgid "What do you want to do with this attacker?"
msgstr "Que desexa facer con este atacante?"

#: standalone/net_applet:445
#, c-format
msgid "Attack details"
msgstr "Detalles do ataque"

#: standalone/net_applet:449
#, c-format
msgid "Attack time: %s"
msgstr "Hora do ataque: %s"

#: standalone/net_applet:450
#, c-format
msgid "Network interface: %s"
msgstr "Interface de rede: %s"

#: standalone/net_applet:451
#, c-format
msgid "Attack type: %s"
msgstr "Tipo de ataque: %s"

#: standalone/net_applet:452
#, c-format
msgid "Protocol: %s"
msgstr "Protocolo: %s"

#: standalone/net_applet:453
#, c-format
msgid "Attacker IP address: %s"
msgstr "Enderezo IP do atacante: %s"

#: standalone/net_applet:454
#, c-format
msgid "Attacker hostname: %s"
msgstr "Nome de máquina do atacante: %s"

#: standalone/net_applet:457
#, c-format
msgid "Service attacked: %s"
msgstr "Servicio atacado: %s"

#: standalone/net_applet:458
#, c-format
msgid "Port attacked: %s"
msgstr "Porto atacado: %s"

#: standalone/net_applet:460
#, c-format
msgid "Type of ICMP attack: %s"
msgstr ""

#: standalone/net_applet:465
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr ""

#: standalone/net_monitor:57 standalone/net_monitor:62
#, c-format
msgid "Network Monitoring"
msgstr "Monitorización da Rede"

#: standalone/net_monitor:98
#, c-format
msgid "Global statistics"
msgstr "Estatísticas globais"

#: standalone/net_monitor:101
#, fuzzy, c-format
msgid "Instantaneous"
msgstr "Instantáneas"

#: standalone/net_monitor:101
#, c-format
msgid "Average"
msgstr "Normal"

#: standalone/net_monitor:102
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""
"Enviando\n"
"velocidade:"

#: standalone/net_monitor:103
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""
"Recibindo\n"
"velocidade:"

#: standalone/net_monitor:107
#, c-format
msgid ""
"Connection\n"
"time: "
msgstr ""
"Conexión\n"
"tempo: "

#: standalone/net_monitor:114
#, c-format
msgid "Use same scale for received and transmitted"
msgstr "Usar a mesma escala para o recibido e o transmitido"

#: standalone/net_monitor:133
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Agarde, probando a conexión..."

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Disconnecting from Internet "
msgstr "Desconectando da Internet "

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Connecting to Internet "
msgstr "Conectando á Internet "

#: standalone/net_monitor:226
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Fallo ó desconectarse da Internet."

#: standalone/net_monitor:227
#, c-format
msgid "Disconnection from Internet complete."
msgstr "Desconexión da Internet completada."

#: standalone/net_monitor:229
#, c-format
msgid "Connection complete."
msgstr "Conexión establecida."

#: standalone/net_monitor:230
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandriva Linux Control Center."
msgstr ""
"Fallo ó conectarse.\n"
"Verifique a configuración no Centro de Control de Mandriva Linux."

#: standalone/net_monitor:335
#, c-format
msgid "Color configuration"
msgstr "Configuración da cor"

#: standalone/net_monitor:383 standalone/net_monitor:403
#, c-format
msgid "sent: "
msgstr "enviados: "

#: standalone/net_monitor:390 standalone/net_monitor:407
#, c-format
msgid "received: "
msgstr "recibidos: "

#: standalone/net_monitor:397
#, c-format
msgid "average"
msgstr ""

#: standalone/net_monitor:400
#, c-format
msgid "Local measure"
msgstr "Medida local"

#: standalone/net_monitor:461
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Advertencia, detectouse outra conexión á Internet, que pode estar usando a "
"súa rede"

#: standalone/net_monitor:472
#, c-format
msgid "No internet connection configured"
msgstr "Non hai conexións á Internet configuradas"

#: standalone/printerdrake:76
#, c-format
msgid "Reading data of installed printers..."
msgstr "Lendo os datos das impresoras instaladas..."

#: standalone/printerdrake:128
#, c-format
msgid "%s Printer Management Tool"
msgstr "Ferramenta de Xestión de Impresoras %s"

#: standalone/printerdrake:142 standalone/printerdrake:143
#: standalone/printerdrake:144 standalone/printerdrake:145
#: standalone/printerdrake:153 standalone/printerdrake:154
#: standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/_Accións"

#: standalone/printerdrake:142 standalone/printerdrake:154
#, c-format
msgid "/_Add Printer"
msgstr "/En_gadir unha Impresora"

#: standalone/printerdrake:143
#, c-format
msgid "/Set as _Default"
msgstr "/Establecer coma _Por defecto"

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/_Editar"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/E_liminar"

#: standalone/printerdrake:146
#, c-format
msgid "/_Expert mode"
msgstr "/Modo e_xperto"

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/_Actualizar"

#: standalone/printerdrake:158
#, c-format
msgid "/_Configure CUPS"
msgstr "/_Configurar CUPS"

#: standalone/printerdrake:171
#, c-format
msgid "/Configure _Auto Administration"
msgstr "/Configurar _Administración Automática"

#: standalone/printerdrake:194
#, c-format
msgid "Search:"
msgstr "Buscar:"

#: standalone/printerdrake:197
#, c-format
msgid "Apply filter"
msgstr "Aplica-lo filtro"

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Def."
msgstr ""

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Printer Name"
msgstr "Nome da Impresora"

#: standalone/printerdrake:224
#, c-format
msgid "Connection Type"
msgstr "Tipo de Conexión"

#: standalone/printerdrake:231
#, c-format
msgid "Server Name"
msgstr "Nome do Servidor"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:239
#, c-format
msgid "Add Printer"
msgstr "Engadir unha Impresora"

#: standalone/printerdrake:239
#, c-format
msgid "Add a new printer to the system"
msgstr "Engadir unha nova impresora ó sistema"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, c-format
msgid "Set as default"
msgstr "Establecer coma por defecto"

#: standalone/printerdrake:242
#, c-format
msgid "Set selected printer as the default printer"
msgstr "Establece-la impresora seleccionada coma a impresora por defecto"

#: standalone/printerdrake:245
#, c-format
msgid "Edit selected printer"
msgstr "Edita-la impresora seleccionada"

#: standalone/printerdrake:248
#, c-format
msgid "Delete selected printer"
msgstr "Elimina-la impresora seleccionada"

#: standalone/printerdrake:251
#, c-format
msgid "Refresh the list"
msgstr "Actualiza-la lista"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS"
msgstr "Configurar CUPS"

#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS printing system"
msgstr "Configura-lo sistema de impresión CUPS"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Enabled"
msgstr "Activada"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Disabled"
msgstr "Desactivada"

#: standalone/printerdrake:596
#, c-format
msgid "Authors: "
msgstr "Autores: "

#. -PO: here %s is the version number
#: standalone/printerdrake:606
#, c-format
msgid "Printer Management %s"
msgstr "Xestión de Impresoras %s"

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"Cómpre instala-los paquetes SANE para poder usar escáners.\n"
"\n"
"Desexa instala-los paquetes SANE?"

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr "Abortando Scannerdrake."

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
"Non se puideron instalar os paquetes necesarios para configurar un escáner "
"con Scannerdrake."

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "Non se vai iniciar Scannerdrake agora."

#: standalone/scannerdrake:67 standalone/scannerdrake:491
#, c-format
msgid "Searching for configured scanners..."
msgstr "Buscando escáners configurados..."

#: standalone/scannerdrake:71 standalone/scannerdrake:495
#, c-format
msgid "Searching for new scanners..."
msgstr "Buscando novos escáners..."

#: standalone/scannerdrake:79 standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr "Volvendo a xerar a lista de escáners configurados..."

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr "O %s non está soportado por esta versión de %s."

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "atopouse %s en %s, ¿desexa configuralo automáticamente?"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s non está na base de datos de escáners, ¿desexa configuralo a man?"

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "Seleccione un modelo de escáner"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "Modelo detectado: %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "Porto: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr "(NON SOPORTADO)"

#: standalone/scannerdrake:144
#, c-format
msgid "The %s is not supported under Linux."
msgstr "O %s non está soportado en Linux."

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr "Non instala-lo ficheiro de firmware"

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr "Se este é o caso, pode facer que isto se faga automáticamente."

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""
"Pode atopar o ficheiro no CD ou no disquete que viña co escáner, na páxina "
"do fabricante, ou na partición de Windows."

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr "Instala-lo ficheiro de firmware dende"

#: standalone/scannerdrake:200
#, c-format
msgid "Select firmware file"
msgstr "Seleccione o ficheiro de firmware"

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr "¡O ficheiro de firmware %s non existe ou non se pode ler!"

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr "Instalar firmware para"

#: standalone/scannerdrake:258
#, c-format
msgid "Select firmware file for the %s"
msgstr "Seleccione o ficheiro de firmware para %s"

#: standalone/scannerdrake:276
#, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "Non se puido instalar o ficheiro de firmware para o %s!"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr "O ficheiro de firmware para %s instalouse con éxito."

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr "%s non está soportado"

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"%s debe configurarse dende printerdrake.\n"
"Pode executar printerdrake dende a sección Hardware do Centro de Control de %"
"s."

#: standalone/scannerdrake:308 standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, c-format
msgid "Auto-detect available ports"
msgstr "Detectar automáticamente os portos dispoñibles"

#: standalone/scannerdrake:310 standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Seleccione o dispositivo onde está conectado o seu %s"

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Nota: Os portos paralelos non se poden detectar automáticamente)"

#: standalone/scannerdrake:313 standalone/scannerdrake:358
#, c-format
msgid "choose device"
msgstr "escoller dispositivo"

#: standalone/scannerdrake:347
#, c-format
msgid "Searching for scanners..."
msgstr "Buscando escáners..."

#: standalone/scannerdrake:383
#, c-format
msgid "Setting up kernel modules..."
msgstr "Configurando os módulos do kernel..."

#: standalone/scannerdrake:390 standalone/scannerdrake:397
#, c-format
msgid "Attention!"
msgstr "Atención!"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:392 standalone/scannerdrake:401
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""
"Máis información na páxina do manual do driver. Execute o comando \"man sane-"
"%s\" para lela."

#: standalone/scannerdrake:394 standalone/scannerdrake:403
#, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""
"Despois disto poderá dixitalizar documentos usando \"XSane\" ou \"Kooka\" "
"dende Multimedia/Gráficos no menú de aplicacións."

#: standalone/scannerdrake:398
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""
"Configurouse o seu %s, pero é posible que sexan necesarios axustes manuais "
"adicionais para que funcione."

#: standalone/scannerdrake:399
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""
"Se non aparece na lista de escáners configurados na ventá principal de "
"Scannerdrake ou se non funciona correctamente, "

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr "editar o ficheiro de configuración /etc/sane.d/%s.conf. "

#: standalone/scannerdrake:406
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"%s xa está configurado.\n"
"Agora pode dixitalizar documentos usando \"XSane\" ou \"Kooka\" dende o menú "
"Multimedia/Gráficos do menú de aplicacións."

#: standalone/scannerdrake:431
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Os seguintes escáners\n"
"\n"
"%s\n"
"están dispoñibles no seu sistema.\n"

#: standalone/scannerdrake:432
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"O seguinte escáner\n"
"\n"
"%s\n"
"está dispoñible no seu sistema.\n"

#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Non se atoparon escáners que estean dispoñibles no teu sistema.\n"

#: standalone/scannerdrake:452
#, c-format
msgid "Search for new scanners"
msgstr "Buscando novos escáners"

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr "Engadir un escáner manualmente"

#: standalone/scannerdrake:465
#, c-format
msgid "Install/Update firmware files"
msgstr "Instalar/Actualiza-los ficheiros de firmware"

#: standalone/scannerdrake:471
#, c-format
msgid "Scanner sharing"
msgstr "Compartimento de escáners"

#: standalone/scannerdrake:530 standalone/scannerdrake:695
#, c-format
msgid "All remote machines"
msgstr "Tódalas máquinas remotas"

#: standalone/scannerdrake:542 standalone/scannerdrake:845
#, c-format
msgid "This machine"
msgstr "Esta máquina"

#: standalone/scannerdrake:582
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Aquí pode escoller se os escáners conectados a esta máquina deben ser "
"accesibles para as máquina remotas e para cales máquina remotas."

#: standalone/scannerdrake:583
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Tamén pode decidir aquí se os escáners das máquinas remotas deben estar "
"dispoñibles neste ordenador."

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Os escáners desta máquina están dispoñibles para outros ordenadores"

#: standalone/scannerdrake:588
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Compartimento de escáners para as máquinas:"

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr "Usar escáners de ordenadores remotos"

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Usar os escáners nas máquinas:"

#: standalone/scannerdrake:632 standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, c-format
msgid "Sharing of local scanners"
msgstr "Compartimento de escáners locais"

#: standalone/scannerdrake:633
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""

#: standalone/scannerdrake:644 standalone/scannerdrake:794
#, c-format
msgid "Add host"
msgstr "Engadir máquina"

#: standalone/scannerdrake:650 standalone/scannerdrake:800
#, c-format
msgid "Edit selected host"
msgstr "Editar a máquina seleccionada"

#: standalone/scannerdrake:659 standalone/scannerdrake:809
#, c-format
msgid "Remove selected host"
msgstr "Eliminar a máquina seleccionada"

#: standalone/scannerdrake:683 standalone/scannerdrake:691
#: standalone/scannerdrake:696 standalone/scannerdrake:742
#: standalone/scannerdrake:833 standalone/scannerdrake:841
#: standalone/scannerdrake:846 standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr "Nome/enderezo IP da máquina:"

#: standalone/scannerdrake:705 standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:716 standalone/scannerdrake:866
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Debe introducir un nome de máquina ou un enderezo IP.\n"

#: standalone/scannerdrake:727 standalone/scannerdrake:877
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Esta máquina xa está na lista, e non se pode volver engadir,\n"

#: standalone/scannerdrake:782
#, c-format
msgid "Usage of remote scanners"
msgstr "Uso de escáners remotos"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: standalone/scannerdrake:940
#, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"Cómpre instalar saned para compartir os escáners locais.\n"
"\n"
"Desexa instalar o paquete saned?"

#: standalone/scannerdrake:944 standalone/scannerdrake:948
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "Os seus escáners non estarán dispoñibles na rede."

#: standalone/service_harddrake:105
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Elimináronse algúns dispositivos na clase de hardware \"%s\":\n"

#: standalone/service_harddrake:106
#, c-format
msgid "- %s was removed\n"
msgstr "- eliminouse %s\n"

#: standalone/service_harddrake:109
#, c-format
msgid "Some devices were added: %s\n"
msgstr "Engadíronse algúns dispositivos: %s\n"

#: standalone/service_harddrake:110
#, c-format
msgid "- %s was added\n"
msgstr "- engadiuse %s\n"

#: standalone/service_harddrake:208
#, c-format
msgid "Hardware probing in progress"
msgstr "Probando o hardware"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr "Cambios de hardware na clase \"%s\" (%s segundos para responder)"

#: standalone/service_harddrake_confirm:8
#, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "Desexa executar a ferramenta de configuración axeitada?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Lingua"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Licencia"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Configura-lo rato"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Detectar discos duros"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Clase de instalación"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Escolla o teclado"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Facendo as particións"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Formata-las particións"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Seleccione os paquetes"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Instala-lo sistema"

#: steps.pm:25
#, c-format
msgid "Administrator password"
msgstr "Contrasinal do administrador"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Engadir un usuario"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Configura-la rede"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Cargador de arrinque"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Configura-las X"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Configura-los servicios"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Instalar actualizacións"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Saír da instalación"

#: ugtk2.pm:899
#, c-format
msgid "Is this correct?"
msgstr "¿É isto correcto?"

#: ugtk2.pm:959
#, c-format
msgid "No file chosen"
msgstr "Non se escolleu ningún ficheiro"

#: ugtk2.pm:961
#, c-format
msgid "You have chosen a file, not a directory"
msgstr "Escolleu un ficheiro, e non un directorio"

#: ugtk2.pm:963
#, c-format
msgid "You have chosen a directory, not a file"
msgstr "Escolleu un directorio, non un ficheiro"

#: ugtk2.pm:965
#, c-format
msgid "No such directory"
msgstr "Non existe tal directorio"

#: ugtk2.pm:965
#, c-format
msgid "No such file"
msgstr "Non existe tal ficheiro"

#: ugtk2.pm:1046
#, c-format
msgid "Expand Tree"
msgstr "Expandi-la árbore"

#: ugtk2.pm:1047
#, c-format
msgid "Collapse Tree"
msgstr "Recolle-la árbore"

#: ugtk2.pm:1048
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Mudar entre lista completa e ordenada por grupos"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s non está instalado\n"
"Prema en \"Seguinte\" para instalalo ou \"Cancelar\" para saír"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "Fallo ó instalar"

#~ msgid ""
#~ "iWinbind allows the system to retrieve information and authenticate users "
#~ "in a Windows domain."
#~ msgstr ""
#~ "iWinbind permítelle ó sistema recuperar información e autenticar usuarios "
#~ "nun dominio Windows."

#~ msgid "Unknown Model"
#~ msgstr "Modelo Descoñecido"

#~ msgid "HPOJ"
#~ msgstr "HPOJ"

#~ msgid ""
#~ "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
#~ "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, "
#~ "Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
#~ msgstr ""
#~ "É a súa impresora un dispositivo multifunción de HP ou Sony (OfficeJet, "
#~ "PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 con escáner, DeskJet "
#~ "450, Sony IJP-V100), unha HP PhotoSmart ou unha HP LaserJet 2200?"

#~ msgid "Installing mtools packages..."
#~ msgstr "Instalando os paquetes mtools..."

#~ msgid "Scanning on your HP multi-function device"
#~ msgstr "Dixitalizando no seu dispositivo multifunción HP"

#, fuzzy
#~ msgid "Printing/Scanning/Photo Cards on \"%s\""
#~ msgstr "Desactivando a rede"

#~ msgid "Printing/Scanning on \"%s\""
#~ msgstr "Imprimindo/Dixitalizando en \"%s\""

#, fuzzy
#~ msgid "Printing/Photo Card Access on \"%s\""
#~ msgstr "Desactivando a rede"

#~ msgid ""
#~ "Your multi-function device was configured automatically to be able to "
#~ "scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to "
#~ "specify the scanner when you have more than one) from the command line or "
#~ "with the graphical interfaces \"xscanimage\" or \"xsane\". If you are "
#~ "using the GIMP, you can also scan by choosing the appropriate point in "
#~ "the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command "
#~ "line to get more information.\n"
#~ "\n"
#~ "You do not need to run \"scannerdrake\" for setting up scanning on this "
#~ "device, you only need to use \"scannerdrake\" if you want to share the "
#~ "scanner on the network."
#~ msgstr ""
#~ "O seu dispositivo multifunción configurouse automáticamente para que sexa "
#~ "capaz de dixitalizar. Agora pode dixitalizar con \"scanimage"
#~ "\" (\"scanimage -d hp:%s\" para especificar o escáner cando ten máis dun) "
#~ "dende a liña de comandos ou cas interfaces gráficas \"xscanimage\" ou "
#~ "\"xsane\". Se está usando o GIMP, tamén pode dixitalizar escollendo o "
#~ "punto apropiado no menú \"Ficheiro\"/\"Adquirir\". Execute tamén \"man "
#~ "scanimage\" na liña de comandos para obter máis información.\n"
#~ "\n"
#~ "Non necesita executar \"scannerdrake\" para configurar a dixitalización "
#~ "neste dispositivo, só ten que usar \"scannerdrake\" se desexa compartir o "
#~ "escáner na rede."

#~ msgid "http://www.mandrivalinux.com/en/errata.php3"
#~ msgstr "http://www.mandrivalinux.com/en/errata.php3"

#~ msgid ""
#~ "\n"
#~ "Please check all options that you need.\n"
#~ msgstr ""
#~ "\n"
#~ "Seleccione tódalas opcións que necesita.\n"

#~ msgid ""
#~ "These options can backup and restore all files in your /etc directory.\n"
#~ msgstr ""
#~ "Estas opcións poden facer unha copia de seguridade de tódolos ficheiros "
#~ "do directorio /etc e restaurala.\n"

#~ msgid ""
#~ "With this option you will be able to restore any version\n"
#~ " of your /etc directory."
#~ msgstr ""
#~ "Con esta opción poderá restaurar calquera versión do\n"
#~ "seu directorio /etc."

#, fuzzy
#~ msgid "Local Area Network setings"
#~ msgstr "Enderezo da Rede Local"

#~ msgid ""
#~ "Kerberos is a secure system for providing network authentication services."
#~ msgstr ""
#~ "Kerberos é un sistema seguro que proporciona servicios de autenticación "
#~ "por rede."

#, fuzzy
#~ msgid "Default Idmap "
#~ msgstr "Escritorio por omisión"

#~ msgid "Please wait, preparing installation..."
#~ msgstr "Por favor agarde, preparando a instalación..."

#~ msgid "Installing package %s"
#~ msgstr "Instalando o paquete %s"

#~ msgid "<b>What is Mandriva Linux?</b>"
#~ msgstr "<b>¿Que é Mandriva Linux?</b>"

#~ msgid "Welcome to <b>Mandriva Linux</b>!"
#~ msgstr "¡Benvid@ a <b>Mandriva Linux</b>!"

#~ msgid ""
#~ "Mandriva Linux is a <b>Linux distribution</b> that comprises the core of "
#~ "the system, called the <b>operating system</b> (based on the Linux "
#~ "kernel) together with <b>a lot of applications</b> meeting every need you "
#~ "could even think of."
#~ msgstr ""
#~ "Mandriva Linux é unha <b>distribución de Linux</b> que consta do núcleo "
#~ "do sistema, chamado <b>sistema operativo</b> (baseado no kernel Linux) "
#~ "xunto cunha <b>chea de aplicacións</b> satisfan tódalas necesidades en "
#~ "que poida pensar."

#~ msgid ""
#~ "Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. "
#~ "It is also one of the <b>most widely used</b> Linux distributions "
#~ "worldwide!"
#~ msgstr ""
#~ "Mandriva Linux é a distribución de Linux máis <b>amigable</b> hoxe en "
#~ "día. Tamén é unha das distribucións de Linux <b>máis usadas</b> en todo o "
#~ "mundo!"

#~ msgid "<b>Open Source</b>"
#~ msgstr "<b>Código Aberto</b>"

#~ msgid "Welcome to the <b>world of open source</b>!"
#~ msgstr "¡Benvid@ ó <b>mundo do Código Aberto</b>!"

#~ msgid ""
#~ "Mandriva Linux is committed to the open source model. This means that "
#~ "this new release is the result of <b>collaboration</b> between "
#~ "<b>Mandriva's team of developers</b> and the <b>worldwide community</b> "
#~ "of Mandriva Linux contributors."
#~ msgstr ""
#~ "Mandriva Linux comprométese co Modelo de Código Aberto. Isto significa "
#~ "que esta nova versión é o resultado da <b>colaboración</b> entre o "
#~ "<b>equipo de desenvolvedores de Mandriva</b> e a <b>comunidade mundial</"
#~ "b> de contribuíntes de Mandriva Linux."

#~ msgid ""
#~ "We would like to <b>thank</b> everyone who participated in the "
#~ "development of this latest release."
#~ msgstr ""
#~ "Queremos <b>darlle as gracias</b> a tódolos que participaron no "
#~ "desenvolvemento desta última versión."

#~ msgid "<b>The GPL</b>"
#~ msgstr "<b>A GPL</b>"

#~ msgid ""
#~ "Most of the software included in the distribution and all of the Mandriva "
#~ "Linux tools are licensed under the <b>General Public License</b>."
#~ msgstr ""
#~ "A maioría do software incluido nesta distribución e tódalas ferramentas "
#~ "de Mandriva Linux usan a <b>General Public License</b>."

#~ msgid ""
#~ "The GPL is at the heart of the open source model; it grants everyone the "
#~ "<b>freedom</b> to use, study, distribute and improve the software any way "
#~ "they want, provided they make the results available."
#~ msgstr ""
#~ "A GPL está no fondo do modelo do código aberto; garántelle a todo o mundo "
#~ "a <b>liberdade</b> para usar, estudiar, distribuír e mellorar o software "
#~ "de calquera forma que queiran, ca condición de que fagan que os "
#~ "resultados estean dispoñibles."

#~ msgid ""
#~ "The main benefit of this is that the number of developers is virtually "
#~ "<b>unlimited</b>, resulting in <b>very high quality</b> software."
#~ msgstr ""
#~ "O maior beneficio disto é que o número de desenvolvedores é virtualmente "
#~ "<b>ilimitado</b>, dando coma resultado software de <b>calidade moi alta</"
#~ "b>."

#~ msgid "<b>Join the Community</b>"
#~ msgstr "<b>¡Únase á comunidade!</b>"

#~ msgid ""
#~ "Mandriva Linux has one of the <b>biggest communities</b> of users and "
#~ "developers. The role of such a community is very wide, ranging from bug "
#~ "reporting to the development of new applications. The community plays a "
#~ "<b>key role</b> in the Mandriva Linux world."
#~ msgstr ""
#~ "Mandriva Linux ten unha das <b>maiores comunidades</b> de usuarios e "
#~ "desenvolvedores. O rol desta comunidade é moi amplo, dende o informe de "
#~ "erros ata o desenvolvemento de novas aplicacións. A comunidade xoga un "
#~ "<b>rol clave</b> no mundo de Mandriva Linux."

#~ msgid ""
#~ "To <b>learn more</b> about our dynamic community, please visit <b>www."
#~ "mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
#~ "php3</b> if you would like to get <b>involved</b> in the development."
#~ msgstr ""
#~ "Para <b>saber máis</b> sobre a nosa dinámica comunidade, visite <b>www."
#~ "mandrivalinux.com</b> ou directamente <b>www.mandrivalinux.com/en/"
#~ "cookerdevel.php3</b> se desexa <b>participar</b> no desenvolvemento."

#~ msgid "<b>Download Version</b>"
#~ msgstr "<b>Versión de Descarga</b>"

#~ msgid ""
#~ "You are now installing <b>Mandriva Linux Download</b>. This is the free "
#~ "version that Mandriva wants to keep <b>available to everyone</b>."
#~ msgstr ""
#~ "Vostede está instalando <b>Mandriva Linux Download</b>. Esta é a versión "
#~ "gratuita que Mandriva quere ter <b>dispoñible para tod@s</b>."

#~ msgid ""
#~ "The Download version <b>cannot include</b> all the software that is not "
#~ "open source. Therefore, you will not find in the Download version:"
#~ msgstr ""
#~ "A versión de Descarga <b>non inclúe</b> todo o software que non é de "
#~ "código aberto. Polo tanto, non atopará na versión de Descarga:"

#~ msgid ""
#~ "\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
#~ msgstr ""
#~ "\t* <b>Drivers proprietarios</b> (coma os drivers para NVIDIA®, ATI™, "
#~ "etc.)."

#~ msgid ""
#~ "\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
#~ "Flash™, etc.)."
#~ msgstr ""
#~ "\t* <b>Software propietario</b> (coma Acrobat® Reader®, RealPlayer®, "
#~ "Flash™, etc.)."

#~ msgid ""
#~ "You will not have access to the <b>services included</b> in the other "
#~ "Mandriva products either."
#~ msgstr ""
#~ "Non terá acceso ós <b>servicios incluidos</b> nos outros productos de "
#~ "Mandriva."

#~ msgid "<b>Discovery, Your First Linux Desktop</b>"
#~ msgstr "<b>Discovery, O Seu Primeiro Escritorio Linux</b>"

#~ msgid "You are now installing <b>Mandriva Linux Discovery</b>."
#~ msgstr "Está instalando <b>Mandriva Linux Discovery</b>."

#~ msgid ""
#~ "Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
#~ "distribution. It includes a hand-picked selection of <b>premium software</"
#~ "b> for office, multimedia and Internet activities. Its menu is task-"
#~ "oriented, with a single application per task."
#~ msgstr ""
#~ "Discovery é a distribución de Linux <b>máis sinxela</b> e <b>máis "
#~ "amigable</b>. Inclúe unha selección especial do <b>software máis "
#~ "solicitado</b> para Oficina, Multimedia e as actividades da Internet. O "
#~ "seu menú está orientada ás diferentes tarefas, cunha soa aplicación por "
#~ "tarefa."

#~ msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
#~ msgstr "Está instalando <b>Mandriva Linux PowerPack</b>."

#~ msgid ""
#~ "PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
#~ "includes <b>thousands of applications</b> - everything from the most "
#~ "popular to the most advanced."
#~ msgstr ""
#~ "PowerPack é o <b>principal producto Linux para escritorio</b> de "
#~ "Mandriva. PowerPack inclúe <b>milleiros de aplicacións</b> - dende as "
#~ "máis populares ás máis avanzadas."

#~ msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
#~ msgstr "<b>PowerPack+, A Solución Linux para Escritorios e Servidores</b>"

#~ msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
#~ msgstr "Está instalando <b>Mandriva Linux PowerPack+</b>."

#~ msgid "<b>Mandriva Products</b>"
#~ msgstr "<b>Productos de Mandriva</b>"

#~ msgid ""
#~ "<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> "
#~ "products."
#~ msgstr ""
#~ "<b>Mandriva</b> desenvolveu unha gran cantidade de productos <b>Mandriva "
#~ "Linux</b>."

#~ msgid "The Mandriva Linux products are:"
#~ msgstr "Os productos Mandriva Linux son:"

#~ msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
#~ msgstr "\t* <b>Discovery</b>, O Seu Primeiro Escritorio Linux."

#~ msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
#~ msgstr ""
#~ "\t* <b>PowerPack+</b>, A Solución Linux para Escritorios e Servidores."

#~ msgid ""
#~ "\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for "
#~ "making the most of your 64-bit processor."
#~ msgstr ""
#~ "\t* <b>Mandriva Linux for x86-64</b>, A solución de Mandriva Linux para "
#~ "aproveitar ó máximo o seu procesador de 64 bits."

#~ msgid "<b>Mandriva Products (Nomad Products)</b>"
#~ msgstr "<b>Productos de Mandriva (Productos para Nómadas)</b>"

#~ msgid ""
#~ "Mandriva has developed two products that allow you to use Mandriva Linux "
#~ "<b>on any computer</b> and without any need to actually install it:"
#~ msgstr ""
#~ "Mandriva desenvolveu dous productos que lle permiten usar Mandriva Linux "
#~ "<b>en calquera ordenador</b> e sen necesidade de instalalo nel:"

#~ msgid ""
#~ "\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
#~ "bootable CD-ROM."
#~ msgstr ""
#~ "\t* <b>Move</b>, unha distribución de Mandriva Linux que se executa "
#~ "totalmente dende un CD-ROM arrincable."

#~ msgid ""
#~ "\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on "
#~ "the ultra-compact “LaCie Mobile Hard Drive”."
#~ msgstr ""
#~ "\t* <b>GlobeTrotter</b>, unha distribución de Mandriva Linux pre-"
#~ "instalada no ultracompacto “LaCie Mobile Hard Drive”."

#~ msgid "<b>Mandriva Products (Professional Solutions)</b>"
#~ msgstr "<b>Productos de Mandriva (Solucións Profesionais)</b>"

#~ msgid ""
#~ "Below are the Mandriva products designed to meet the <b>professional "
#~ "needs</b>:"
#~ msgstr ""
#~ "Debaixo están os productos de Mandriva deseñados para solucionar as "
#~ "<b>necesidades profesionais</b>:"

#~ msgid ""
#~ "\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
#~ msgstr ""
#~ "\t* <b>Corporate Desktop</b>, O Escritorio para Negocios de Mandriva "
#~ "Linux."

#~ msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
#~ msgstr ""
#~ "\t* <b>Corporate Server</b>, A Solución para Servidores de Mandriva Linux."

#~ msgid ""
#~ "\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
#~ msgstr ""
#~ "\t* <b>Multi-Network Firewall</b>, A Solución para a Seguridade de "
#~ "Mandriva Linux."

#~ msgid "<b>The KDE Choice</b>"
#~ msgstr "<b>A Elección de KDE</b>"

#~ msgid ""
#~ "KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
#~ "will not ever think of running another operating system!"
#~ msgstr ""
#~ "KDE fará que os seus <b>primeiros pasos</b> con Linux sexan tan "
#~ "<b>fáciles</b> que nunca máis pensará en usar ningún outro sistema "
#~ "operativo!"

#~ msgid ""
#~ "KDE also includes a lot of <b>well integrated applications</b> such as "
#~ "Konqueror, the web browser and Kontact, the personal information manager."
#~ msgstr ""
#~ "KDE tamén inclúe unha chea de <b>aplicacións ben integradas</b> coma "
#~ "Konqueror, o navegador web e Kontact, o administrador de información "
#~ "persoal."

#~ msgid "<b>Choose your Favorite Desktop Environment</b>"
#~ msgstr "<b>Escolla o seu Ambiente de Escritorio Preferido</b>"

#~ msgid ""
#~ "KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
#~ "desktop environment available. It includes a lot of integrated "
#~ "applications."
#~ msgstr ""
#~ "KDE é un dos contornos de escritorio gráfico <b>máis avanzados</b> e "
#~ "<b>amigable</b> dispoñibles. Inclúe unha chea de aplicacións integradas."

#~ msgid ""
#~ "But we advise you to try all available ones (including <b>GNOME</b>, "
#~ "<b>IceWM</b>, etc.) and pick your favorite."
#~ msgstr ""
#~ "Pero aconsellámoslle que probe tódolos dispoñibles (incluindo <b>GNOME</"
#~ "b>, <b>IceWM</b>, etc.) e que escolla o seu favorito."

#~ msgid "<b>OpenOffice.org</b>"
#~ msgstr "<b>OpenOffice.org</b>"

#~ msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
#~ msgstr "Con Discovery, descubrirá <b>OpenOffice.org</b>."

#~ msgid ""
#~ "It is a <b>full-featured office suite</b> that includes word processor, "
#~ "spreadsheet, presentation and drawing applications."
#~ msgstr ""
#~ "É unha <b>suite ofimática cunha chea de funcionalidades</b> que inclúe "
#~ "aplicacións coma un procesador de palabras, folla de cálculos, "
#~ "presentacións e debuxo."

#~ msgid ""
#~ "OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
#~ "documents such as Word, Excel and PowerPoint® files."
#~ msgstr ""
#~ "OpenOffice.org pode ler e escribir a maioría dos tipos de documentos de "
#~ "<b>Microsoft® Office</b> coma os ficheiros Word, Excel e PowerPoint®."

#~ msgid "<b>Kontact</b>"
#~ msgstr "<b>Kontact</b>"

#~ msgid ""
#~ "More than just a full-featured <b>e-mail client</b>, Kontact also "
#~ "includes an <b>address book</b>, a <b>calendar</b>, plus a tool for "
#~ "taking <b>notes</b>!"
#~ msgstr ""
#~ "Máis ca un <b>cliente de correo-e</b> con moitas funcionalidades, Kontact "
#~ "tamén inclúe un <b>caderno de enderezos</b>, un <b>calendario</b>, e máis "
#~ "unha ferramenta para tomar notas!"

#~ msgid ""
#~ "It is the easiest way to communicate with your contacts and to organize "
#~ "your time."
#~ msgstr ""
#~ "É a maneira máis sinxela de comunicarse cos seus contactos e de organizar "
#~ "o seu tempo."

#~ msgid "<b>Surf the Internet</b>"
#~ msgstr "<b>Navegar pola Internet</b>"

#~ msgid "\t* Browse the <b>Web</b> with Konqueror."
#~ msgstr "\t* Navegue pola <b>Web</b> con Konqueror."

#~ msgid "\t* <b>Chat</b> online with your friends using Kopete."
#~ msgstr "\t* <b>Chatee</b> en liña cos seus amigos usando Kopete."

#~ msgid "\t* <b>Transfer</b> files with KBear."
#~ msgstr "\t* <b>Transfira</b> ficheiros con KBear."

#~ msgid "\t* ..."
#~ msgstr "\t* ..."

#~ msgid "<b>Enjoy our Multimedia Features</b>"
#~ msgstr "<b>Goce cas nosas Funcionalidades Multimedia</b>"

#~ msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
#~ msgstr "\t* Vexa os seus <b>videos</b> favoritos con Kaffeine."

#~ msgid "\t* Listen to your <b>music files</b> with amaroK."
#~ msgstr "\t* Escoite os seus <b>ficheiros de música</b> con amaroK."

#~ msgid "\t* Edit and create <b>images</b> with the GIMP."
#~ msgstr "\t* Edite e cree <b>imaxes</b> con O GIMP."

#~ msgid ""
#~ "In the Mandriva Linux menu you will find <b>easy-to-use</b> applications "
#~ "for <b>all of your tasks</b>:"
#~ msgstr ""
#~ "No menú de Mandriva Linux atopará aplicacións <b>fáciles de usar</b> para "
#~ "<b>tódalas tarefas</b>:"

#~ msgid ""
#~ "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
#~ msgstr ""
#~ "\t* Cree, edite e comparta documentos de oficina con <b>OpenOffice.org</b>"

#~ msgid ""
#~ "\t* Manage your personal data with the integrated personal information "
#~ "suites <b>Kontact</b> and <b>Evolution</b>."
#~ msgstr ""
#~ "\t* Encárguese dos seus datos persoais cas suites integradas de "
#~ "información persoal <b>Kontact</b> e <b>Evolution</b>"

#~ msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
#~ msgstr "\t* Navegue pola Web con <b>Mozilla</b> e <b>Konqueror</b>"

#~ msgid "\t* Participate in online chat with <b>Kopete</b>."
#~ msgstr "\t* Participe en chats en liña con <b>Kopete</b>"

#~ msgid ""
#~ "\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
#~ "<b>videos</b>."
#~ msgstr ""
#~ "\t* Escoite os seus <b>CDs de audio</b> e <b>ficheiros de música</b>, e "
#~ "vexa os seus <b>vídeos</b>."

#~ msgid "\t* Edit and create images with the <b>GIMP</b>."
#~ msgstr "\t* Edite imaxes e fotografías con <b>O Gimp</b>"

#~ msgid "<b>Development Environments</b>"
#~ msgstr "<b>Ambientes de desenvolvemento</b>"

#~ msgid ""
#~ "PowerPack gives you the best tools to <b>develop</b> your own "
#~ "applications."
#~ msgstr ""
#~ "PowerPack proporciónalle as mellores ferramentas para <b>desenvolver</b> "
#~ "as súas propias aplicacións."

#~ msgid ""
#~ "You will enjoy the powerful, integrated development environment from KDE, "
#~ "<b>KDevelop</b>, which will let you program in a lot of languages."
#~ msgstr ""
#~ "Gozará co potente contorno de desenvolvemento integrado de KDE, "
#~ "<b>KDevelop</b>, que lle permitirá programar nunha chea de linguaxes."

#~ msgid "<b>Development Editors</b>"
#~ msgstr "<b>Editores de Desenvolvemento</b>"

#~ msgid "PowerPack will let you choose between those <b>popular editors</b>:"
#~ msgstr ""
#~ "PowerPack deixaralle escoller entre estes <b>populares editores</b>:"

#~ msgid ""
#~ "\t* <b>XEmacs</b>: another open source text editor and application "
#~ "development system."
#~ msgstr ""
#~ "\t* <b>XEmacs</b>: outro editor de texto e sistema de desenvolvemento de "
#~ "aplicacións de Código Aberto"

#~ msgid ""
#~ "\t* <b>Vim</b>: an advanced text editor with more features than standard "
#~ "Vi."
#~ msgstr ""
#~ "\t* <b>Vim</b>: un editor de texto avanzado con máis funcionalidades có "
#~ "estándar Vi"

#~ msgid "<b>Development Languages</b>"
#~ msgstr "<b>Linguaxes de Desenvolvemento</b>"

#~ msgid ""
#~ "With all these <b>powerful tools</b>, you will be able to write "
#~ "applications in <b>dozens of programming languages</b>:"
#~ msgstr ""
#~ "Con todas estas <b>potentes ferramentas</b>, poderá escribir aplicacións "
#~ "en <b>ducias de linguaxes de programación</b>:"

#~ msgid "\t* The famous <b>C language</b>."
#~ msgstr "\t* A famosa <b>linguaxe de programación C</b>."

#~ msgid "\t* Object oriented languages:"
#~ msgstr "\t* Linguaxes de programación orientadas a obxectos:"

#~ msgid "\t\t* <b>C++</b>"
#~ msgstr "\t\t* <b>C++</b>"

#~ msgid "\t\t* <b>Java™</b>"
#~ msgstr "\t\t* <b>Java™</b>"

#~ msgid "\t* Scripting languages:"
#~ msgstr "\t* Linguaxes de script:"

#~ msgid "\t\t* <b>Perl</b>"
#~ msgstr "\t\t* <b>Perl</b>"

#~ msgid "\t\t* <b>Python</b>"
#~ msgstr "\t\t* <b>Python</b>"

#~ msgid "\t* And many more."
#~ msgstr "\t* E moito máis."

#~ msgid "<b>Development Tools</b>"
#~ msgstr "<b>Ferramentas de Desenvolvemento</b>"

#~ msgid ""
#~ "With the powerful integrated development environment <b>KDevelop</b> and "
#~ "the leading Linux compiler <b>GCC</b>, you will be able to create "
#~ "applications in <b>many different languages</b> (C, C++, Java™, Perl, "
#~ "Python, etc.)."
#~ msgstr ""
#~ "Co potente ambiente de desenvolvemento integrado <b>KDevelop</b> e o "
#~ "compilador líder para Linux <b>GCC</b>, será capaz de crear aplicacións "
#~ "en <b>varias linguaxes diferentes</b> (C, C++, Java™, Perl, Python, etc.)."

#, fuzzy
#~ msgid "<b>Groupware Server</b>"
#~ msgstr "<b>Servidores</b>"

#~ msgid "\t* Send and receive your <b>e-mails</b>."
#~ msgstr "\t* Envie e reciba os seus <b>correos-e</b>."

#~ msgid "<b>Servers</b>"
#~ msgstr "<b>Servidores</b>"

#~ msgid ""
#~ "\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
#~ msgstr ""
#~ "\t* <b>Samba</b>: Servicios de impresión e de ficheiros para clientes MS-"
#~ "Windows"

#~ msgid "\t* <b>Apache</b>: The most widely used web server."
#~ msgstr "\t* <b>Apache</b>: O servidor Web máis usado"

#~ msgid ""
#~ "\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open "
#~ "source databases."
#~ msgstr ""
#~ "\t* <b>MySQL</b> e <b>PostgreSQL</b>: As bases de datos de Código Aberto "
#~ "máis populares do mundo."

#~ msgid ""
#~ "\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server "
#~ "software."
#~ msgstr ""
#~ "\t* <b>ProFTPD</b>: o software de servidor FTP altamente configurable "
#~ "licenciado baixo a GPL"

#~ msgid ""
#~ "\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
#~ "servers."
#~ msgstr ""
#~ "\t* <b>Postfix</b> e <b>Sendmail</b>: Os potentes e populares servidores "
#~ "de correo."

#~ msgid "<b>Mandriva Linux Control Center</b>"
#~ msgstr "<b>Centro de Control de Mandriva Linux</b>"

#~ msgid ""
#~ "The <b>Mandriva Linux Control Center</b> is an essential collection of "
#~ "Mandriva Linux-specific utilities designed to simplify the configuration "
#~ "of your computer."
#~ msgstr ""
#~ "O <b>Centro de Control de Mandriva Linux</b> é unha colección esencial de "
#~ "utilidades específicas de Mandriva Linux para facilita-la configuración "
#~ "do ordenador."

#~ msgid ""
#~ "You will immediately appreciate this collection of <b>more than 60</b> "
#~ "handy utilities for <b>easily configuring your system</b>: hardware "
#~ "devices, mount points, network and Internet, security level of your "
#~ "computer, etc."
#~ msgstr ""
#~ "Apreciará inmediatamente esta colección de <b>máis de 60</b> prácticas "
#~ "utilidades para <b>configurar fácilmente o seu sistema</b>: dispositivos "
#~ "hardware, puntos de montaxe, rede e Internet, nivel de seguridade do seu "
#~ "ordenador, etc."

#~ msgid "<b>The Open Source Model</b>"
#~ msgstr "<b>O Modelo do Código Aberto</b>"

#~ msgid "<b>Online Store</b>"
#~ msgstr "<b>Tenda en liña</b>"

#~ msgid ""
#~ "To learn more about Mandriva products and services, you can visit our "
#~ "<b>e-commerce platform</b>."
#~ msgstr ""
#~ "Para saber máis acerca dos productos e servicios de Mandriva, pode "
#~ "visitar a nosa <b>plataforma de comercio electrónico</b>."

#~ msgid ""
#~ "This platform has just been <b>redesigned</b> to improve its efficiency "
#~ "and usability."
#~ msgstr ""
#~ "Esta plataforma acaba de <b>volverse deseñar</b> para mellorar a súa "
#~ "eficiencia e usabilidade."

#~ msgid "Stop by today at <b>store.mandriva.com</b>!"
#~ msgstr "Parar hoxe en <b>store.mandriva.com</b>"

#~ msgid "<b>Mandriva Club</b>"
#~ msgstr "<b>Mandriva Club</b>"

#~ msgid ""
#~ "<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva "
#~ "Linux product.."
#~ msgstr ""
#~ "<b>Mandriva Club</b> é o <b>compañeiro perfecto</b> para o seu producto "
#~ "Mandriva Linux."

#~ msgid ""
#~ "Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such "
#~ "as:"
#~ msgstr ""
#~ "Se se une a Mandriva Club poderá gozar de <b>valiosos beneficios</b>, "
#~ "coma:"

#~ msgid ""
#~ "\t* <b>Special discounts</b> on products and services of our online store "
#~ "<b>store.mandriva.com</b>."
#~ msgstr ""
#~ "\t* <b>Descontos especiais</b> en productos e servicios da nosa tenda en "
#~ "liña <b>store.mandriva.com</b>."

#~ msgid ""
#~ "\t* Access to <b>commercial applications</b> (for example to NVIDIA® or "
#~ "ATI™ drivers)."
#~ msgstr ""
#~ "\t* Acceso a <b>aplicacións comerciais</b> (por exemplo os drivers "
#~ "NVIDIA® ou ATI™)."

#~ msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
#~ msgstr "\t* Participación nos <b>foros de usuarios</b> de Mandriva Linux."

#~ msgid ""
#~ "\t* <b>Early and privileged access</b>, before public release, to "
#~ "Mandriva Linux <b>ISO images</b>."
#~ msgstr ""
#~ "\t* <b>Acceso privilexiado e anticipado</b>, antes da liberación pública, "
#~ "ás <b>imaxes ISO</b> de Mandriva Linux."

#~ msgid "<b>Mandriva Online</b>"
#~ msgstr "<b>Mandriva Online</b>"

#~ msgid ""
#~ "Mandriva Online provides a wide range of valuable services for <b>easily "
#~ "updating</b> your Mandriva Linux systems:"
#~ msgstr ""
#~ "Mandriva Online fornece unha gran cantidade de valiosos servicios para "
#~ "<b>actualizar fácilmente</b> os seus sistemas Mandriva Linux:"

#~ msgid "\t* <b>Perfect</b> system security (automated software updates)."
#~ msgstr ""
#~ "\t* Sistema de seguridade <b>perfecto</b> (actualizacións de software "
#~ "automáticas)."

#~ msgid ""
#~ "\t* Management of <b>all your Mandriva Linux systems</b> with one account."
#~ msgstr ""
#~ "\t* Administración de <b>tódolos seus sistemas Mandriva Linux</b> cunha "
#~ "conta."

#~ msgid "<b>Mandriva Expert</b>"
#~ msgstr "<b>Mandriva Expert</b>"

#~ msgid ""
#~ "Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will "
#~ "save a lot of time."
#~ msgstr ""
#~ "Gracias á axuda dos <b>cualificados expertos de Mandriva Linux</b>, "
#~ "aforrará unha chea de tempo."

#~ msgid "ESSID"
#~ msgstr "ESSID"

#~ msgid "Key"
#~ msgstr "Clave"

#~ msgid "Network:"
#~ msgstr "Rede:"

#~ msgid "IP:"
#~ msgstr "IP:"

#~ msgid "Mode:"
#~ msgstr "Modo:"

#~ msgid "Encryption:"
#~ msgstr "Cifraxe:"

#~ msgid "Signal:"
#~ msgstr "Sinal:"

#~ msgid "Set"
#~ msgstr "Conxunto"

#~ msgid "Available Networks"
#~ msgstr "Redes Dispoñibles"

#~ msgid "Status"
#~ msgstr "Estado"

#~ msgid "Disconnect"
#~ msgstr "Desconectar"

#~ msgid "text width"
#~ msgstr "ancho do texto"

#~ msgid "Choose progress bar color"
#~ msgstr "Escolla a cor da barra de progreso"

#~ msgid "ProgressBar color selection"
#~ msgstr "Selección da cor da barra de progreso"

#~ msgid "Connect to the Internet"
#~ msgstr "Conectar á Internet"

#~ msgid ""
#~ "The most common way to connect with adsl is pppoe.\n"
#~ "Some connections use PPTP, a few use DHCP.\n"
#~ "If you do not know, choose 'use PPPoE'"
#~ msgstr ""
#~ "O xeito máis habitual de conectar con adsl é con pppoe.\n"
#~ "Algunhas conexións usan PPTP, e algunhas usan DHCP.\n"
#~ "Se non o sabe con certeza, escolla 'usar PPPoE'"

#~ msgid "Do not print any test page"
#~ msgstr "Non imprimir ningunha páxina de proba"

#~ msgid "Printer on SMB/Windows 95/98/NT server"
#~ msgstr "Impresora SMB/Windows 95/98/NT server"

#~ msgid "Found printer on %s..."
#~ msgstr "Atopouse unha impresora en %s..."

#, fuzzy
#~ msgid "dhcpd Config..."
#~ msgstr "Configurando..."

#~ msgid ""
#~ "package 'ImageMagick' is required to be able to complete configuration.\n"
#~ "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
#~ msgstr ""
#~ "Necesítase o paquete 'ImageMagick' para completa-la configuración.\n"
#~ "Prema en \"Aceptar\" para instalar 'ImageMagick' ou \"Cancelar\" para saír"

#, fuzzy
#~ msgid "Unable to select wireless network: %s"
#~ msgstr "Busque e conéctese a redes sen fíos (wireless)"

#, fuzzy
#~ msgid "Interactive intrusion detection"
#~ msgstr "Detección automática da impresora"

#~ msgid "Actions"
#~ msgstr "Accións"

#, fuzzy
#~ msgid "Active Firewall: intrusion detected"
#~ msgstr "¡Detectouse unha configuración de cortalumes!"

#, fuzzy
#~ msgid "Do you want to blacklist the attacker?"
#~ msgstr "¿Queres rematar o xogo?"

#~ msgid "Grub"
#~ msgstr "Grub"

#~ msgid "Network (http)"
#~ msgstr "Rede (http)"

#~ msgid "Network (ftp)"
#~ msgstr "Rede (ftp)"

#~ msgid "use PPPoE"
#~ msgstr "usar PPPoE"

#~ msgid "use PPTP"
#~ msgstr "usar PPTP"

#~ msgid "use DHCP"
#~ msgstr "usar DHCP"

#~ msgid "Alcatel Speedtouch USB"
#~ msgstr "Alcatel Speedtouch USB"

#~ msgid " - detected"
#~ msgstr " - detectado"

#~ msgid ""
#~ "The selected device has already been configured with the %s driver.\n"
#~ "Do you really want to use a ndiswrapper driver ?"
#~ msgstr ""
#~ "O dispositivo seleccionado xa se configurou co driver %s.\n"
#~ "Desexa usar un driver ndiswrapper?"

#~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
#~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"

#~ msgid ""
#~ "Warning, another Internet connection has been detected, maybe using your "
#~ "network"
#~ msgstr ""
#~ "Advertencia, detectouse outra conexión á Internet, pode estar usando a "
#~ "súa rede"

#~ msgid "drakfloppy"
#~ msgstr "drakfloppy"

#~ msgid "Boot disk creation"
#~ msgstr "Creación do disco de arrinque"

#~ msgid "General"
#~ msgstr "Xeral"

#~ msgid "Kernel version"
#~ msgstr "Versión do kernel"

#~ msgid "Preferences"
#~ msgstr "Preferencias"

#~ msgid "Advanced preferences"
#~ msgstr "Preferencias avanzadas"

#~ msgid "Size"
#~ msgstr "Tamaño"

#~ msgid "Mkinitrd optional arguments"
#~ msgstr "Argumentos opcionais para mkinitrd"

#~ msgid "force"
#~ msgstr "forzar"

#~ msgid "omit raid modules"
#~ msgstr "omiti-los módulos raid"

#~ msgid "if needed"
#~ msgstr "se for necesario"

#~ msgid "omit scsi modules"
#~ msgstr "omiti-los módulos scsi"

#~ msgid "Add a module"
#~ msgstr "Engadir un módulo"

#~ msgid "Remove a module"
#~ msgstr "Quitar un módulo"

#~ msgid "Be sure a media is present for the device %s"
#~ msgstr "Asegúrese de que hai un soporte no dispositivo %s"

#~ msgid ""
#~ "There is no medium or it is write-protected for device %s.\n"
#~ "Please insert one."
#~ msgstr ""
#~ "Non hai soporte ou está protexido contra a escritura, no dispositivo %s.\n"
#~ "Insira un."

#~ msgid "Floppy creation completed"
#~ msgstr "Completouse a creación do disquete"

#~ msgid "The creation of the boot floppy has been successfully completed \n"
#~ msgstr "A creación do disquete de arrinque completouse con éxito\n"

#~ msgid ""
#~ "Unable to properly close mkbootdisk:\n"
#~ "\n"
#~ "<span foreground=\"Red\"><tt>%s</tt></span>"
#~ msgstr ""
#~ "Non se puido pechar de xeito correcto o mkbootdisk:\n"
#~ "\n"
#~ "<span foreground=\"Red\"><tt>%s</tt></span>"

#~ msgid "Local Network adress"
#~ msgstr "Enderezo da Rede Local"

#~ msgid "Configuring scripts, installing software, starting servers..."
#~ msgstr ""
#~ "Configurando os scripts, instalando o software, iniciando os servidores..."

#~ msgid "PXE Server Configuration"
#~ msgstr "Configuración do Servidor PXE"

#~ msgid "Installation Server Configuration"
#~ msgstr "Configuración do Servidor de Instalación"

#, fuzzy
#~ msgid ""
#~ "You are about to configure your computer to install a PXE server as a "
#~ "DHCP server\n"
#~ "and a TFTP server to build an installation server.\n"
#~ "With that feature, other computers on your local network will be "
#~ "installable using this computer as source.\n"
#~ "\n"
#~ "Make sure you have configured your Network/Internet access using "
#~ "drakconnect before going any further.\n"
#~ "\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN)."
#~ msgstr ""
#~ "Está a piques de configurar o seu ordenador para que comparta a conexión "
#~ "á Internet.\n"
#~ "\n"
#~ "Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
#~ "área local (LAN)."

#~ msgid "No network adapter on your system!"
#~ msgstr "¡Non hai ningún adaptador de rede no seu sistema!"

#~ msgid "Choose the network interface"
#~ msgstr "Escolla a interface de rede"

#~ msgid ""
#~ "Please choose which network interface will be used for the dhcp server."
#~ msgstr "Escolla a interface de rede que usará o servidor DHCP."

#~ msgid "Interface %s (on network %s)"
#~ msgstr "Interface %s (na rede %s)"

#~ msgid "The DHCP start ip"
#~ msgstr "O IP inicial de DHCP"

#~ msgid "The DHCP end ip"
#~ msgstr "O IP final de DHCP"

#~ msgid ""
#~ "Please indicate where the installation image will be available.\n"
#~ "\n"
#~ "If you do not have an existing directory, please copy the CD or DVD "
#~ "contents.\n"
#~ "\n"
#~ msgstr ""
#~ "Indique onde está a imaxe de instalación.\n"
#~ "\n"
#~ "Se non hai ningún directorio, copie o contido do CD ou DVD.\n"
#~ "\n"

#~ msgid "Installation image directory"
#~ msgstr "Directorio da imaxe de instalación"

#~ msgid "No image found"
#~ msgstr "Non se atopou ningunha imaxe"

#~ msgid ""
#~ "No CD or DVD image found, please copy the installation program and rpm "
#~ "files."
#~ msgstr ""
#~ "Non se atopou ningunha imaxe de CD ou DVD, copie o programa de "
#~ "instalación e os ficheiros rpm."

#~ msgid ""
#~ "Please indicate where the auto_install.cfg file is located.\n"
#~ "\n"
#~ "Leave it blank if you do not want to set up automatic installation mode.\n"
#~ "\n"
#~ msgstr ""
#~ "Indique onde está o ficheiro auto_install.cfg.\n"
#~ "\n"
#~ "Déixeo en branco se non quere usa-lo modo de instalación automática.\n"
#~ "\n"

#~ msgid "Location of auto_install.cfg file"
#~ msgstr "Localización do ficheiro auto_install.cfg"

#~ msgid "Do it later"
#~ msgstr "Facelo máis tarde"

#~ msgid "MdkKDM (Mandriva Linux Display Manager)"
#~ msgstr "MdkKDM (Mandriva Linux Display Manager)"

#~ msgid "Internet Connection Sharing currently disabled"
#~ msgstr "O Compartimento da Conexión á Internet está desactivado"

#~ msgid "Enabling servers..."
#~ msgstr "Activando os servidores..."

#~ msgid "Internet Connection Sharing currently enabled"
#~ msgstr "O Compartimento da Conexión á Internet está activado"

#~ msgid "Interface %s (using module %s)"
#~ msgstr "Interface %s (usando o módulo %s)"

#~ msgid "Interface %s"
#~ msgstr "Interface %s"

#~ msgid "Network interface already configured"
#~ msgstr "A interface de rede xa está configurada"

#~ msgid ""
#~ "Warning, the network adapter (%s) is already configured.\n"
#~ "\n"
#~ "Do you want an automatic re-configuration?\n"
#~ "\n"
#~ "You can do it manually but you need to know what you're doing."
#~ msgstr ""
#~ "Advertencia, o adaptador de rede (%s) xa está configurado.\n"
#~ "\n"
#~ "¿Desexa reconfiguralo automáticamente?\n"
#~ "\n"
#~ "Pode facelo a man pero necesita saber qué é o que está facendo."

#~ msgid "No (experts only)"
#~ msgstr "Non (só expertos)"

#~ msgid "Show current interface configuration"
#~ msgstr "Amosa-la configuración actual da interface"

#~ msgid "Current interface configuration"
#~ msgstr "Configuración actual da interface"

#~ msgid "(This) DHCP Server IP"
#~ msgstr "IP deste servidor DHCP"

#~ msgid "Re-configure interface and DHCP server"
#~ msgstr "Volver a configura-la interface e o servidor DHCP"

#~ msgid ""
#~ "WARNING: this device has been previously configured to connect to the "
#~ "Internet.\n"
#~ "Modifying the fields below will override this configuration.\n"
#~ "Do you really want to reconfigure this device?"
#~ msgstr ""
#~ "ADVERTENCIA: Este dispositivo foi configurado previamente para conectar á "
#~ "Internet.\n"
#~ "Se modifica os campos de embaixo, substituirá esta configuración.\n"
#~ "Desexa volver configurar este dispositivo?"

#~ msgid "hd"
#~ msgstr "disco duro"

#~ msgid "tape"
#~ msgstr "cinta"

#~ msgid "WebDAV transfer failed!"
#~ msgstr "¡Fallo na transferencia de WebDAV!"

#~ msgid ""
#~ "Maximum size\n"
#~ " allowed for Drakbackup (MB)"
#~ msgstr ""
#~ "Tamaño máximo\n"
#~ "permitido por Drakbackup (MB)"

#~ msgid "\t-Network by webdav.\n"
#~ msgstr "\t-Rede usando webdav.\n"

#~ msgid "first step creation"
#~ msgstr "primeiro paso da creación"

#~ msgid "choose image file"
#~ msgstr "escolla o ficheiro de imaxe"

#~ msgid "Configure bootsplash picture"
#~ msgstr "Configurar a imaxe de bootsplash"

#~ msgid "the color of the progress bar"
#~ msgstr "a cor da barra de progreso"

#~ msgid "Preview"
#~ msgstr "Vista Previa"

#~ msgid "Choose color"
#~ msgstr "Escolle-la cor"

#~ msgid "Notice"
#~ msgstr "Aviso"

#~ msgid "You must choose an image file first!"
#~ msgstr "¡Debe escoller un ficheiro de imaxe primeiro!"

#~ msgid "Generating preview..."
#~ msgstr "Xerando a vista previa..."

#~ msgid "No floppy drive available"
#~ msgstr "Non hai ningunha disqueteira dispoñible"

#, fuzzy
#~ msgid "Please insert the Update Modules floppy in drive %s"
#~ msgstr "Insira un disquete baleiro na unidade %s"

#, fuzzy
#~ msgid ""
#~ "_: keyboard\n"
#~ "Tifinagh (+latin/arabic)"
#~ msgstr "Iugoslavo (latín)"

#~ msgid "No network card"
#~ msgstr "Non se atopou ningunha tarxeta de rede"

#~ msgid "Use already installed driver (%s)"
#~ msgstr "Usar o driver xa instalado (%s)"

#~ msgid "You've not selected any font"
#~ msgstr "Non seleccionou ningunha fonte"

#~ msgid "http://www.mandrivalinux.com/en/101errata.php3"
#~ msgstr "http://www.mandrivalinux.com/en/101errata.php3"

#~ msgid "The Mandriva Linux 10.1 products are:"
#~ msgstr "Os productos Mandriva Linux 10.1 son:"