# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# Riho Kurg <rx@linux.ee>, 1999-2001.
# 
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2001-09-21 19:50+0200\n"
"PO-Revision-Date: 1999-10-28 19:54+0200\n"
"Last-Translator: Riho Kurg <rx@linux.ee>\n"
"Language-Team: Estonian <et@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-15\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfigurator.pm_.c:231
msgid "Configure all heads independently"
msgstr "Seadista k�ik monitorid s�ltumatult"

#: ../../Xconfigurator.pm_.c:232
msgid "Use Xinerama extension"
msgstr "Kasuta Xinerama laiendusi"

#: ../../Xconfigurator.pm_.c:235
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "Seadista ainult kaart \"%s\" (%s)"

#
#: ../../Xconfigurator.pm_.c:238
msgid "Multi-head configuration"
msgstr "Mitme monitori seadistamine"

#: ../../Xconfigurator.pm_.c:239
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"S�steemis on v�imalik kasutada mitut monitori.\n"
"Mida Te soovite teha?"

#: ../../Xconfigurator.pm_.c:248
msgid "Graphic card"
msgstr "Graafikakaart"

#: ../../Xconfigurator.pm_.c:248
msgid "Select a graphic card"
msgstr "Valige graafikakaart"

#: ../../Xconfigurator.pm_.c:249
msgid "Choose a X server"
msgstr "Valige X server"

#: ../../Xconfigurator.pm_.c:249
msgid "X server"
msgstr "X server"

#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s"
msgstr "XFree86 %s"

#: ../../Xconfigurator.pm_.c:310
msgid "Which configuration of XFree do you want to have?"
msgstr "Millise XFree konfiguratsiooni soovite kasutada?"

#: ../../Xconfigurator.pm_.c:321
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
"XFree %s toetab Teie videokaarti ja v�ib omada paremat 2D tuge."

#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."

#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s koos 3D graafikakiirendi toega"

#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
"SEE ON AGA EKSPERIMENTAALNE JA V�IB OLLA EBASTABIILNE."

#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"

#: ../../Xconfigurator.pm_.c:344
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
"SEE ON AGA EKSPERIMENTAALNE JA V�IB OLLA EBASTABIILNE.\n"
"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."

#: ../../Xconfigurator.pm_.c:364
msgid "Xpmac (installation display driver)"
msgstr ""

#: ../../Xconfigurator.pm_.c:368
msgid "XFree configuration"
msgstr "XFree s�tted"

#: ../../Xconfigurator.pm_.c:434
msgid "Select the memory size of your graphic card"
msgstr "Valige graafikam�lu suurus"

#: ../../Xconfigurator.pm_.c:492
msgid "Choose options for server"
msgstr "Valige X server"

#: ../../Xconfigurator.pm_.c:516
msgid "Choose a monitor"
msgstr "Valige monitor"

#: ../../Xconfigurator.pm_.c:516
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfigurator.pm_.c:519
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Kaks kriitilist suurust on ekraanisagedus, mis m��rab kogu kuva\n"
"uuendamise aja ja realaotussagedus\n"
"\n"
"On V�GA T�HTIS, et Te ei m��raks siinkohal monitori, mille realaotus on\n"
"suurem kui Teie monitor v�imaldab. Vastasel juhul v�ib Teie monitor h�vida.\n"
"Kui kahtlete, valige pigem v�iksem v��rtus."

#: ../../Xconfigurator.pm_.c:526
msgid "Horizontal refresh rate"
msgstr "Realaotussagedus"

#: ../../Xconfigurator.pm_.c:527
msgid "Vertical refresh rate"
msgstr "Ekraaniuuendussagedus"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor not configured"
msgstr "Monitor ei ole seadistatud"

#: ../../Xconfigurator.pm_.c:567
msgid "Graphic card not configured yet"
msgstr "Graafikakaart ei ole veel seatud"

#: ../../Xconfigurator.pm_.c:570
msgid "Resolutions not chosen yet"
msgstr "Kuvatihedus ei ole veel seatud"

#: ../../Xconfigurator.pm_.c:587
msgid "Do you want to test the configuration?"
msgstr "Kas soovite seadistusi proovida?"

#: ../../Xconfigurator.pm_.c:591
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Hoiatus: testimine v�ib Teie arvuti peatada"

#: ../../Xconfigurator.pm_.c:594
msgid "Test of the configuration"
msgstr "Proovime seadistusi"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"proovige m�nd parameetrit muuta"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid "An error has occurred:"
msgstr "Tekkis mingi viga:"

#: ../../Xconfigurator.pm_.c:668
#, c-format
msgid "Leaving in %d seconds"
msgstr "J�tkub %d sekundi p�rast"

#: ../../Xconfigurator.pm_.c:679
msgid "Is this the correct setting?"
msgstr "Kas see on �ige?"

#: ../../Xconfigurator.pm_.c:688
msgid "An error has occurred, try to change some parameters"
msgstr "Tekkis mingi viga, proovige m�nd parameetrit muuta"

#: ../../Xconfigurator.pm_.c:759
msgid "Resolution"
msgstr "Kuvatihedus"

#: ../../Xconfigurator.pm_.c:810
msgid "Choose the resolution and the color depth"
msgstr "Valige kuvatihedus ja v�rvis�gavus"

#: ../../Xconfigurator.pm_.c:812
#, c-format
msgid "Graphic card: %s"
msgstr "Graafikakaart: %s"

#: ../../Xconfigurator.pm_.c:813
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86 server: %s"

#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
msgid "Expert Mode"
msgstr "Ekspertresiim"

#: ../../Xconfigurator.pm_.c:830
msgid "Show all"
msgstr "N�ita k�ike"

#: ../../Xconfigurator.pm_.c:875
msgid "Resolutions"
msgstr "Kuvatihedused"

#: ../../Xconfigurator.pm_.c:1437
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Klaviatuuriasetus: %s\n"

#: ../../Xconfigurator.pm_.c:1438
#, c-format
msgid "Mouse type: %s\n"
msgstr "Hiire t��p: %s\n"

#: ../../Xconfigurator.pm_.c:1439
#, c-format
msgid "Mouse device: %s\n"
msgstr "Hiire port: %s\n"

#: ../../Xconfigurator.pm_.c:1440
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfigurator.pm_.c:1441
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Realaotussagedus: %s\n"

#: ../../Xconfigurator.pm_.c:1442
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Ekraanisagedus: %s\n"

#: ../../Xconfigurator.pm_.c:1443
#, c-format
msgid "Graphic card: %s\n"
msgstr "Graafikakaart: %s\n"

#: ../../Xconfigurator.pm_.c:1444
#, fuzzy, c-format
msgid "Graphic card identification: %s\n"
msgstr "Graafikakaart: %s\n"

#: ../../Xconfigurator.pm_.c:1445
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Videom�lu: %s kB\n"

#: ../../Xconfigurator.pm_.c:1447
#, c-format
msgid "Color depth: %s\n"
msgstr "V�rvis�gavus: %s\n"

#: ../../Xconfigurator.pm_.c:1448
#, c-format
msgid "Resolution: %s\n"
msgstr "Kuvatihedus: %s\n"

#: ../../Xconfigurator.pm_.c:1450
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 server: %s\n"

#: ../../Xconfigurator.pm_.c:1451
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 juhtprogramm: %s\n"

#: ../../Xconfigurator.pm_.c:1469
msgid "Preparing X-Window configuration"
msgstr "Valmistume X-i seadistamiseks"

#: ../../Xconfigurator.pm_.c:1489
msgid "What do you want to do?"
msgstr "Mida Te soovite teha?"

#: ../../Xconfigurator.pm_.c:1494
msgid "Change Monitor"
msgstr "Muuda monitori"

#: ../../Xconfigurator.pm_.c:1495
msgid "Change Graphic card"
msgstr "Muuda graafikakaardi"

#: ../../Xconfigurator.pm_.c:1497
msgid "Change Server options"
msgstr "Muuda serveri parameetreid"

#: ../../Xconfigurator.pm_.c:1498
msgid "Change Resolution"
msgstr "Muuda kuvatihedust"

#: ../../Xconfigurator.pm_.c:1499
msgid "Show information"
msgstr "N�ita lisainfot"

#: ../../Xconfigurator.pm_.c:1500
msgid "Test again"
msgstr "Proovi veel"

#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
msgid "Quit"
msgstr "V�lju"

#: ../../Xconfigurator.pm_.c:1509
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"S�ilita muutused?\n"
"Olemasolevad s�tted:\n"
"\n"
"%s"

# c-format
#: ../../Xconfigurator.pm_.c:1532
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Muudatuste aktiveerimiseks k�ivitage %s uuesti"

#: ../../Xconfigurator.pm_.c:1552
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Palun v�ljuge ja vajutage siis Ctrl-Alt-BackSpace"

#: ../../Xconfigurator.pm_.c:1555
msgid "X at startup"
msgstr "X stardib n��d"

#: ../../Xconfigurator.pm_.c:1556
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"Teie arvutis on v�imalik k�ivitada X juba alglaadimisel.\n"
"Kas soovite nii teha?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 v�rvi (8 bitti)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "32 tuhat v�rvi (15 bitti)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "65 tuhat v�rvi (16 bitti)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "16 miljonit v�rvi (24 bitti)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 miljardit v�rvi (32 bitti)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfigurator_consts.pm_.c:112
#, fuzzy
msgid "16 MB"
msgstr "1 MB"

#: ../../Xconfigurator_consts.pm_.c:113
#, fuzzy
msgid "32 MB"
msgstr "2 MB"

#: ../../Xconfigurator_consts.pm_.c:114
#, fuzzy
msgid "64 MB or more"
msgstr "16 MB v�i rohkem"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "VGA, 640x400 sagedusel 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "SVGA, 800x600 sagedusel 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514-�hilduv, 1024x768, 87 Hz vahelej�tuga "

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "SVGA, 1024x768, 87 Hz vahelej�tuga, 800x600, 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "SVGA, 800x600 sagedusel 60 Hz, 640x480 sagedusel 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "SVGA, 1024x768 sagedusel 60 Hz, 800x600 sagedusel 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "K�rgsageduslik SVGA, 1024x768, 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Mitmesageduslik, 1280x1024 sagedusel 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Mitmesageduslik, 1280x1024 sagedusel 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Mitmesageduslik, 1280x1024 sagedusel 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 76 Hz"

#: ../../any.pm_.c:96 ../../any.pm_.c:121
msgid "First sector of boot partition"
msgstr "Partitsiooni algusesse"

#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
msgid "First sector of drive (MBR)"
msgstr "Ketta algusesse (MBR)"

#: ../../any.pm_.c:100
msgid "SILO Installation"
msgstr "SILO installimine"

#: ../../any.pm_.c:101 ../../any.pm_.c:114
msgid "Where do you want to install the bootloader?"
msgstr "Kuhu soovite alglaaduri installida"

#: ../../any.pm_.c:113
msgid "LILO/grub Installation"
msgstr "LILO/grub installimine"

#: ../../any.pm_.c:125 ../../any.pm_.c:139
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:127
msgid "LILO with text menu"
msgstr "LILO tekstiresiimis"

#: ../../any.pm_.c:128 ../../any.pm_.c:139
msgid "LILO with graphical menu"
msgstr "LILO graafikaresiimis"

#: ../../any.pm_.c:131
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:135
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Laadimine DOS/Windowsist (loadlin)"

#: ../../any.pm_.c:137 ../../any.pm_.c:139
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:145 ../../any.pm_.c:177
msgid "Bootloader main options"
msgstr "Alglaaduri peas�tted"

#: ../../any.pm_.c:146 ../../any.pm_.c:178
msgid "Bootloader to use"
msgstr "Eelistatav alglaadur"

#: ../../any.pm_.c:148
msgid "Bootloader installation"
msgstr "Alglaaduri peas�tted"

#: ../../any.pm_.c:150 ../../any.pm_.c:180
msgid "Boot device"
msgstr "Alglaadimisseade"

#: ../../any.pm_.c:151
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (ei t��ta vanema BIOSi korral)"

#: ../../any.pm_.c:152
msgid "Compact"
msgstr "Kompaktne"

#: ../../any.pm_.c:152
msgid "compact"
msgstr "kompaktne"

#: ../../any.pm_.c:153 ../../any.pm_.c:250
msgid "Video mode"
msgstr "Graafikamood"

#: ../../any.pm_.c:155
msgid "Delay before booting default image"
msgstr "Ooteaeg alglaadimisel"

#: ../../any.pm_.c:157 ../../any.pm_.c:730
#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
#: ../../standalone/draknet_.c:603
msgid "Password"
msgstr "Salas�na"

#: ../../any.pm_.c:158 ../../any.pm_.c:731
#: ../../install_steps_interactive.pm_.c:939
msgid "Password (again)"
msgstr "Salas�na (uuesti)"

#: ../../any.pm_.c:159
msgid "Restrict command line options"
msgstr "Piira k�surea suvandeid"

#: ../../any.pm_.c:159
msgid "restrict"
msgstr "piiratud"

#: ../../any.pm_.c:161
msgid "Clean /tmp at each boot"
msgstr "Puhasta /tmp igal laadimisel"

#: ../../any.pm_.c:162
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Kui vaja, t�psusta RAM suurust (leitud %d MB)"

#: ../../any.pm_.c:164
msgid "Enable multi profiles"
msgstr "V�imalda mitut profiili"

#: ../../any.pm_.c:168
msgid "Give the ram size in MB"
msgstr "Anna m�lu suurus megabaitides"

#: ../../any.pm_.c:170
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "S�te ``Piira k�surea suvandeid'' on ilma salas�nata mittekasutatav"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "Please try again"
msgstr "Palun proovige veel"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "The passwords do not match"
msgstr "Salas�nad ei klapi"

#: ../../any.pm_.c:179
msgid "Init Message"
msgstr "Initsialiseerimisteade"

#: ../../any.pm_.c:181
msgid "Open Firmware Delay"
msgstr "Open Firmware viivitus"

#: ../../any.pm_.c:182
msgid "Kernel Boot Timeout"
msgstr "Ajapiirang kerneli laadimisel"

#: ../../any.pm_.c:183
msgid "Enable CD Boot?"
msgstr "CD-lt laadimine lubatud?"

#: ../../any.pm_.c:184
msgid "Enable OF Boot?"
msgstr "OF laadimine lubatud?"

#: ../../any.pm_.c:185
msgid "Default OS?"
msgstr "Vaikimisi OS?"

#: ../../any.pm_.c:207
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"Praegu on kasutusel sellised kirjed.\n"
"Te v�ite neid lisada ning olemasolevaid muuta."

#: ../../any.pm_.c:217
msgid "Add"
msgstr "Lisa"

#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
#: ../../printerdrake.pm_.c:1948
msgid "Done"
msgstr "Tehtud"

#: ../../any.pm_.c:217
#, fuzzy
msgid "Modify"
msgstr "Modifitseeri RAIDi"

#: ../../any.pm_.c:225
msgid "Which type of entry do you want to add?"
msgstr "Millisele sektorile soovite seda t�sta?"

#: ../../any.pm_.c:226
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:226
msgid "Other OS (SunOS...)"
msgstr "Muu OS (SunOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (MacOS...)"
msgstr "Muu OS (MacOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (windows...)"
msgstr "Muu OS (windows...)"

#: ../../any.pm_.c:246
msgid "Image"
msgstr "Laadefail"

#: ../../any.pm_.c:247 ../../any.pm_.c:258
msgid "Root"
msgstr "Juur"

#: ../../any.pm_.c:248 ../../any.pm_.c:277
msgid "Append"
msgstr "Lisada"

#: ../../any.pm_.c:252
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:253
msgid "Read-write"
msgstr "Read-write"

#: ../../any.pm_.c:260
msgid "Table"
msgstr "Tabel"

#: ../../any.pm_.c:261
msgid "Unsafe"
msgstr "Ebaturvaline"

#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
msgid "Label"
msgstr "T�his"

#: ../../any.pm_.c:270 ../../any.pm_.c:281
msgid "Default"
msgstr "Vaikimisi"

#: ../../any.pm_.c:278
msgid "Initrd-size"
msgstr "Initrd suurus"

#: ../../any.pm_.c:280
msgid "NoVideo"
msgstr "NoVideo"

#: ../../any.pm_.c:288
msgid "Remove entry"
msgstr "Eemalda kirje"

#: ../../any.pm_.c:291
msgid "Empty label not allowed"
msgstr "T�hi kirjet�his ei ole lubatud"

#: ../../any.pm_.c:292
msgid "This label is already used"
msgstr "Selline t�his on juba kasutusel"

#: ../../any.pm_.c:597
#, c-format
msgid "Found %s %s interfaces"
msgstr "Leiti %s %s liidest"

#: ../../any.pm_.c:598
msgid "Do you have another one?"
msgstr "On Teil veel kaarte?"

#: ../../any.pm_.c:599
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Kas Teil on ikka m�ni %s liides?"

#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "No"
msgstr "Ei"

#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "Yes"
msgstr "Jah"

#: ../../any.pm_.c:602
msgid "See hardware info"
msgstr "Info riistvara kohta"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:637
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installime juhtprogrammil %s kaardile %s"

#: ../../any.pm_.c:638
#, c-format
msgid "(module %s)"
msgstr "(moodul %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:649
#, c-format
msgid "Which %s driver should I try?"
msgstr "Millist %s juhtprogrammi peaksime proovima?"

#: ../../any.pm_.c:657
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"M�nedel juhtudel vajab %s juhtprogramm t��ks lisainformatsiooni\n"
"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
"m��ratleda v�i lasta juhtprogrammil ise Teie arvutit kompida? V�ib juhtuda,\n"
"et see viib arvuti segadusse kuid ei tohiks mingit j��vat kahju teha."

#: ../../any.pm_.c:662
msgid "Autoprobe"
msgstr "Proovida niisama"

#: ../../any.pm_.c:662
msgid "Specify options"
msgstr "M��rake parameetrid"

#: ../../any.pm_.c:666
#, c-format
msgid "You may now provide its options to module %s."
msgstr "N��d v�ite moodulile %s parameetreid m��rata"

#: ../../any.pm_.c:672
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"N��d v�ite moodulile %s parameetreid m��rata.\n"
"Parameetrid on vormingus \"nimi=v��rtus nimi2=v��rtus2 ...\".\n"
"N�iteks: \"io=0x300 irq=7\""

#: ../../any.pm_.c:675
msgid "Module options:"
msgstr "Mooduli parameetrid:"

#: ../../any.pm_.c:686
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Moodule %s laadimine ei �nnestunud.\n"
"Kas soovite proovida parameetreid muuta?"

#: ../../any.pm_.c:704
#, c-format
msgid "(already added %s)"
msgstr "(juba lisatud %s)"

#: ../../any.pm_.c:708
msgid "This password is too simple"
msgstr "Salas�na on liiga lihtne"

#: ../../any.pm_.c:709
msgid "Please give a user name"
msgstr "Palun andke kasutajatunnus"

#: ../../any.pm_.c:710
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Kasutajatunnus tohib sisaldada ainult v�ikesi t�hti, numbreid, - ja _"

#: ../../any.pm_.c:711
msgid "This user name is already added"
msgstr "See kasutajatunnus on juba lisatud"

#: ../../any.pm_.c:715
msgid "Add user"
msgstr "Lisa kasutaja"

#: ../../any.pm_.c:716
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Sisesta kasutaja\n"
"%s"

#: ../../any.pm_.c:717
msgid "Accept user"
msgstr "Kasutaja �ige"

#: ../../any.pm_.c:728
msgid "Real name"
msgstr "P�risnimi"

#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
#: ../../printerdrake.pm_.c:480
msgid "User name"
msgstr "Kasutajatunnus"

#: ../../any.pm_.c:732
msgid "Shell"
msgstr "K�surida"

#: ../../any.pm_.c:734
msgid "Icon"
msgstr "Ikoon"

#: ../../any.pm_.c:756
msgid "Autologin"
msgstr "Vaikimisi sisenemine"

#: ../../any.pm_.c:757
#, fuzzy
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Teie arvutit saab seada vaikimisi kasutaja sisenemisele.\n"
"Kui Te seda ei soovi, valige <Katkesta>"

#: ../../any.pm_.c:761
msgid "Choose the default user:"
msgstr "Valige uus vaikimisi kasutaja :"

#: ../../any.pm_.c:762
msgid "Choose the window manager to run:"
msgstr "Valige palun k�ivitatav aknahaldur:"

#: ../../any.pm_.c:771
msgid "Please, choose a language to use."
msgstr "Palun valige kasutatav keel"

#: ../../any.pm_.c:773
msgid "You can choose other languages that will be available after install"
msgstr "Teisi keeli saab valida p�rast installimist"

#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
msgid "All"
msgstr "K�ik"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
# 
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:259
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Tere tulemast! Laadimisel aitab Teid %s!\n"
"\n"
"Valige nimekirjast eelistatav OS,\n"
"vaikimisi oodake %d sekundit.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:835
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:838
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Kasutage valiku tegemiseks %c ja %c klahve"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:841
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Enter laeb Teie valiku, 'e' laseb muuta"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:844
msgid "commands before booting, or 'c' for a command-line."
msgstr "suvandeid enne laadimist ja 'c' veel enam."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:847
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Valik laetakse automaatselt %d sekundi jooksul"

#: ../../bootloader.pm_.c:851
msgid "not enough room in /boot"
msgstr "/boot on liiga t�is"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:951
msgid "Desktop"
msgstr "T��laud"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:953
msgid "Start Menu"
msgstr "Startmen��"

#: ../../bootloader.pm_.c:972
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Kuhu soovite alglaaduri installida"

#: ../../bootlook.pm_.c:46
msgid "no help implemented yet.\n"
msgstr "selle kohta (veel) abi ei saa.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Alglaaduri stiil"

#: ../../bootlook.pm_.c:79
msgid "/_File"
msgstr "/_Fail"

#: ../../bootlook.pm_.c:80
msgid "/File/_Quit"
msgstr "/Fail/_V�lju"

#: ../../bootlook.pm_.c:80
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "NewStyle kategoriseeritud j�lgimine"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "NewStyle j�lgimine"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "Tavaline j�lgimine"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Traditsiooniline Gtk+ j�lgimine"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "K�ivita alglaadimisel Aurora"

#: ../../bootlook.pm_.c:100
#, fuzzy
msgid "Lilo/grub mode"
msgstr "Valimisviis"

#: ../../bootlook.pm_.c:102
#, fuzzy, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Interneti�henduse jagamise Abimees!\n"
"\n"
"%s\n"
"\n"
"Valige Abimehe k�ivitamiseks ``OK''"

#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
msgid "Configure"
msgstr "Seadista"

#: ../../bootlook.pm_.c:108
msgid "Boot mode"
msgstr "Alglaadimismood"

#: ../../bootlook.pm_.c:136
msgid "System mode"
msgstr "T��mood"

#: ../../bootlook.pm_.c:138
msgid "Launch the X-Window system at start"
msgstr "K�ivita X-Windows alglaadimisel"

#: ../../bootlook.pm_.c:143
msgid "No, I don't want autologin"
msgstr "Ei taha automaatselt siseneda"

#: ../../bootlook.pm_.c:145
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"

#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
#: ../../standalone/draknet_.c:644
msgid "OK"
msgstr "OK"

#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
msgid "Cancel"
msgstr "Katkesta"

#: ../../bootlook.pm_.c:224
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "ei saa lugeda faili /etc/inittab: %s"

#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
msgid "Installation of LILO failed. The following error occured:"
msgstr "LILO installimine eba�nnestus. Tekkis j�rgnev viga:"

#: ../../common.pm_.c:93
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:93
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:101
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:109
#, c-format
msgid "%d minutes"
msgstr "%d minutit"

#: ../../common.pm_.c:111
msgid "1 minute"
msgstr "1 minut"

#: ../../common.pm_.c:113
#, c-format
msgid "%d seconds"
msgstr "%d sekundit"

#: ../../diskdrake.pm_.c:100
msgid "Please make a backup of your data first"
msgstr "Palun tehke oma andmetest enne tagavarakoopia"

#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
msgid "Read carefully!"
msgstr "Lugege hoolega!"

#: ../../diskdrake.pm_.c:103
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Kui soovite kasutada aboot-i, j�tke palun ketta algusesse v�hemalt 2048 \n"
"sektorit vaba ruumi"

#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
#: ../../install_steps_interactive.pm_.c:37
#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
msgid "Error"
msgstr "Viga"

#: ../../diskdrake.pm_.c:159
msgid "Wizard"
msgstr "Abimees"

#: ../../diskdrake.pm_.c:181
msgid "New"
msgstr "Uus"

#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
#, fuzzy
msgid "Remote"
msgstr "Eemalda"

#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
msgid "Mount point"
msgstr "�henduspunkt"

#: ../../diskdrake.pm_.c:209
msgid "Options"
msgstr "Eelistused"

#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
#: ../../diskdrake_interactive.pm_.c:488
msgid "Type"
msgstr "T��p"

#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
msgid "Unmount"
msgstr "�henda lahti"

#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
msgid "Mount"
msgstr "�henda"

#: ../../diskdrake.pm_.c:228
msgid "Choose action"
msgstr "Valige tegevus"

#: ../../diskdrake.pm_.c:235
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Teil on �ks suur FAT partitsioon.\n"
"(tavaliselt kasutab sellist MS DOS/Windows)\n"
"Soovitame teil esmalt selle suurust muuta\n"
"(klikkige ja siis valige \"Muuda\")"

#: ../../diskdrake.pm_.c:238
msgid "Please click on a partition"
msgstr "Palun valige partitsioon"

#: ../../diskdrake.pm_.c:240
#, fuzzy
msgid "Please click on a media"
msgstr "Palun valige partitsioon"

#: ../../diskdrake.pm_.c:243
#, fuzzy
msgid ""
"Please click on a button above\n"
"\n"
"Or use \"New\""
msgstr "Palun valige partitsioon"

#: ../../diskdrake.pm_.c:244
msgid "Use \"New\""
msgstr ""

#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
msgid "Details"
msgstr "�ksikasjad"

#: ../../diskdrake.pm_.c:395
msgid "Ext2"
msgstr "ext2"

#: ../../diskdrake.pm_.c:395
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:395
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:395
#, fuzzy
msgid "Journalised FS"
msgstr "�hendamine eba�nnestus"

#: ../../diskdrake.pm_.c:395
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:395
msgid "Swap"
msgstr "Saaleala"

#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
msgid "Empty"
msgstr "T�hi"

#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
#: ../../services.pm_.c:161
msgid "Other"
msgstr "Muu"

#: ../../diskdrake.pm_.c:400
msgid "Filesystem types:"
msgstr "Failis�steemi t��bid: "

#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
msgid "Create"
msgstr "Tekita"

#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
#, c-format
msgid "Use ``%s'' instead"
msgstr "Kasutage pigem ``%s''"

#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
msgid "Delete"
msgstr "Kustuta"

#: ../../diskdrake.pm_.c:423
msgid "Use ``Unmount'' first"
msgstr "Kasutage enne \"�henda lahti\""

#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "Partitsiooni %s t��bi muutmisel h�vivad k�ik seal olnud andmed"

#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Kuhu soovite seadme %s �hendada?"

#: ../../diskdrake.pm_.c:500
#, fuzzy
msgid "Mount options"
msgstr "Mooduli parameetrid:"

#: ../../diskdrake.pm_.c:507
msgid "Various"
msgstr ""

#: ../../diskdrake.pm_.c:525
#, fuzzy
msgid "Removable media"
msgstr "CD/flopi/.. auto�hendamine"

#: ../../diskdrake.pm_.c:532
#, fuzzy
msgid "Change type"
msgstr "Muuda partitsiooni t��p"

#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
msgid "Which filesystem do you want?"
msgstr "Mis failis�steemi soovite kasutada?"

#: ../../diskdrake.pm_.c:564
msgid "Scanning available nfs shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:569
#, c-format
msgid "Scanning available nfs shared resource of server %s"
msgstr ""

#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
msgid "If the list above doesn't contain the wanted entry, enter it here:"
msgstr ""

#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
msgid "Server"
msgstr "Server"

#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
msgid "Shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:615
msgid "Scanning available samba shared resource"
msgstr ""

#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
#, c-format
msgid "Scanning available samba shared resource of server %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose a partition"
msgstr "Valige tegevus"

#: ../../diskdrake_interactive.pm_.c:163
#, fuzzy
msgid "Choose another partition"
msgstr "Looge uus partitsioon"

#: ../../diskdrake_interactive.pm_.c:188
#, fuzzy
msgid "Exit"
msgstr "ext2"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to expert mode"
msgstr "Tavakasutaja > Ekspert"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to normal mode"
msgstr "Ekspert > Tavakasutaja"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Undo"
msgstr "Tagasi"

#: ../../diskdrake_interactive.pm_.c:229
msgid "Continue anyway?"
msgstr "J�tkate ikkagi?"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without saving"
msgstr "L�peta ilma salvestamata"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without writing the partition table?"
msgstr "L�petate ilma partitsioonitabelit salvestamata?"

#: ../../diskdrake_interactive.pm_.c:237
#, fuzzy
msgid "Do you want to save /etc/fstab modifications"
msgstr "Kas soovite seadistusi proovida?"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Auto allocate"
msgstr "Paiguta ise"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Clear all"
msgstr "Kustuta k�ik"

#: ../../diskdrake_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:171
msgid "More"
msgstr "Veel.."

#: ../../diskdrake_interactive.pm_.c:250
#, fuzzy
msgid "Hard drive information"
msgstr "Meili informatsioon"

#: ../../diskdrake_interactive.pm_.c:267
msgid "Not enough space for auto-allocating"
msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"

#: ../../diskdrake_interactive.pm_.c:273
msgid "All primary partitions are used"
msgstr "K�ik primaarsed partitsioonid on kasutusel"

#: ../../diskdrake_interactive.pm_.c:274
msgid "I can't add any more partition"
msgstr "Partitsioone ei saa enam lisada"

#: ../../diskdrake_interactive.pm_.c:275
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Et saada rohkem partitsioone, kustutage palun �ks, et luua laiendatud "
"partitsioon"

#: ../../diskdrake_interactive.pm_.c:285
#, fuzzy
msgid "Save partition table"
msgstr "Kirjuta partitsioonitabel"

#: ../../diskdrake_interactive.pm_.c:286
#, fuzzy
msgid "Restore partition table"
msgstr "P��sta partitsioonitabel"

#: ../../diskdrake_interactive.pm_.c:287
msgid "Rescue partition table"
msgstr "P��sta partitsioonitabel"

#: ../../diskdrake_interactive.pm_.c:289
#, fuzzy
msgid "Reload partition table"
msgstr "P��sta partitsioonitabel"

#: ../../diskdrake_interactive.pm_.c:293
#, fuzzy
msgid "Removable media automounting"
msgstr "CD/flopi/.. auto�hendamine"

#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
msgid "Select file"
msgstr "Valige fail"

#: ../../diskdrake_interactive.pm_.c:308
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Tabeli tagavarakoopia ei ole sama suurusega\n"
"Soovite j�tkata?"

#: ../../diskdrake_interactive.pm_.c:322
msgid "Warning"
msgstr "Hoiatus"

#: ../../diskdrake_interactive.pm_.c:323
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Pange t�hi flopi masinasse\n"
"K�ik andmed sellel h�vivad"

#: ../../diskdrake_interactive.pm_.c:334
msgid "Trying to rescue partition table"
msgstr "Proovin p��sta partitsioonitabelit"

#: ../../diskdrake_interactive.pm_.c:340
#, fuzzy
msgid "Detailed information"
msgstr "Meili informatsioon"

#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
msgid "Resize"
msgstr "Muuda suurust"

#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
msgid "Move"
msgstr "Liiguta"

#: ../../diskdrake_interactive.pm_.c:356
msgid "Format"
msgstr "Vorminda"

#: ../../diskdrake_interactive.pm_.c:358
msgid "Active"
msgstr "Aktiivne"

#: ../../diskdrake_interactive.pm_.c:359
msgid "Add to RAID"
msgstr "Lisa RAIDi"

#: ../../diskdrake_interactive.pm_.c:360
msgid "Add to LVM"
msgstr "Lisa LVMi"

#: ../../diskdrake_interactive.pm_.c:363
msgid "Remove from RAID"
msgstr "Eemalda RAIDist"

#: ../../diskdrake_interactive.pm_.c:364
msgid "Remove from LVM"
msgstr "Eemalda LVMist"

#: ../../diskdrake_interactive.pm_.c:365
msgid "Modify RAID"
msgstr "Modifitseeri RAIDi"

#: ../../diskdrake_interactive.pm_.c:366
msgid "Use for loopback"
msgstr "Kasuta loopback-ina"

#: ../../diskdrake_interactive.pm_.c:409
msgid "Create a new partition"
msgstr "Looge uus partitsioon"

#: ../../diskdrake_interactive.pm_.c:412
msgid "Start sector: "
msgstr "Algsektor: "

#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
msgid "Size in MB: "
msgstr "Suurus (MB): "

#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
msgid "Filesystem type: "
msgstr "Failis�steemi t��p: "

#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
#: ../../diskdrake_interactive.pm_.c:1010
msgid "Mount point: "
msgstr "�henduspunkt:"

#: ../../diskdrake_interactive.pm_.c:420
msgid "Preference: "
msgstr "Eelistus: "

#: ../../diskdrake_interactive.pm_.c:462
#, fuzzy
msgid "Remove the loopback file?"
msgstr "Vormindan loopback faili %s"

#: ../../diskdrake_interactive.pm_.c:486
msgid "Change partition type"
msgstr "Muuda partitsiooni t��p"

#: ../../diskdrake_interactive.pm_.c:491
msgid "Switching from ext2 to ext3"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:521
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Kuhu soovite loopback-faili %s �hendada?"

#: ../../diskdrake_interactive.pm_.c:528
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Seda �henduspunkti ei saa eemaldada, kuna partitsioon on kasutusel.\n"
"loopback-ina. Eemaldage enne loopback"

#: ../../diskdrake_interactive.pm_.c:549
msgid "Computing FAT filesystem bounds"
msgstr "Arvutan FAT failis�steemi piire"

#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
#: ../../install_interactive.pm_.c:116
msgid "Resizing"
msgstr "Muudan suurust"

#: ../../diskdrake_interactive.pm_.c:578
msgid "This partition is not resizeable"
msgstr "See partitsioon ei ole muudetav"

#: ../../diskdrake_interactive.pm_.c:583
msgid "All data on this partition should be backed-up"
msgstr "Selle partitsiooni andmetest v�iks olla tagavarakoopia"

#: ../../diskdrake_interactive.pm_.c:585
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Partitsiooni %s suuruse muutmisel h�vivad sellel k�ik andmed"

#: ../../diskdrake_interactive.pm_.c:590
msgid "Choose the new size"
msgstr "Valige uus suurus"

#: ../../diskdrake_interactive.pm_.c:591
#, fuzzy
msgid "New size in MB: "
msgstr "Suurus (MB): "

#: ../../diskdrake_interactive.pm_.c:631
msgid "Which disk do you want to move it to?"
msgstr "Millisele kettale soovite seda �mber paigutada?"

#: ../../diskdrake_interactive.pm_.c:632
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake_interactive.pm_.c:633
msgid "Which sector do you want to move it to?"
msgstr "Millisele sektorile soovite seda �mber paigutada?"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving"
msgstr "Paigutan �mber"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving partition..."
msgstr "Liigutan partitsiooni..."

#: ../../diskdrake_interactive.pm_.c:657
msgid "Choose an existing RAID to add to"
msgstr "Vali olemasolev RAID, millele lisada"

#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
msgid "new"
msgstr "uus"

#: ../../diskdrake_interactive.pm_.c:674
msgid "Choose an existing LVM to add to"
msgstr "Vali olemasolev LVM, millele lisada"

#: ../../diskdrake_interactive.pm_.c:679
msgid "LVM name?"
msgstr "LVM nimi?"

#: ../../diskdrake_interactive.pm_.c:718
msgid "This partition can't be used for loopback"
msgstr "Seda partitsiooni ei saa loopback-ina kasutada"

#: ../../diskdrake_interactive.pm_.c:730
msgid "Loopback"
msgstr "loopback"

#: ../../diskdrake_interactive.pm_.c:731
msgid "Loopback file name: "
msgstr "loopback faili nimi:"

#: ../../diskdrake_interactive.pm_.c:736
#, fuzzy
msgid "Give a file name"
msgstr "P�risnimi"

#: ../../diskdrake_interactive.pm_.c:739
msgid "File already used by another loopback, choose another one"
msgstr "See fail on juba loopback-ina kasutusel, valige m�ni muu"

#: ../../diskdrake_interactive.pm_.c:740
msgid "File already exists. Use it?"
msgstr "Fail on juba olemas. Kas kasutan seda?"

#: ../../diskdrake_interactive.pm_.c:784
msgid "device"
msgstr "seade"

#: ../../diskdrake_interactive.pm_.c:785
msgid "level"
msgstr "tase"

#: ../../diskdrake_interactive.pm_.c:786
msgid "chunk size"
msgstr "�hiku suurus"

#: ../../diskdrake_interactive.pm_.c:801
msgid "Be careful: this operation is dangerous."
msgstr "Vaadake ette: see v�ib olla ohtlik."

#: ../../diskdrake_interactive.pm_.c:816
msgid "What type of partitioning?"
msgstr "Mis t��pi partitsioonid teete?"

#: ../../diskdrake_interactive.pm_.c:834
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Vabandan, aga ei saa n�ustuda /boot kataloogi paigutamisega kaugemale 1024-"
"st silindrist.\n"
"Kui kasutate LILO-t, ei t��ta see sel moel, kui aga ei kasuta, ei ole Teile "
"ka /boot vajalik"

#: ../../diskdrake_interactive.pm_.c:838
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Partitsioon, mida soovite kasutada juurkataloogi (/) hoidmiseks, asub\n"
"f��siliselt tagapool 1024-t silindrit ja Teil ei ole /boot partitsiooni.\n"
"Kui plaanite kasutada LILO alglaadurit, lisage kindlasti /boot partitsioon"

#: ../../diskdrake_interactive.pm_.c:844
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
"Ilma /boot partitsioonita ei ole v�imalik sellist s�steemi laadida.\n"
"Lisage kindlasti /boot partitsioon!"

#: ../../diskdrake_interactive.pm_.c:864
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Ketta %s partitsioonitabel salvestatakse!"

#: ../../diskdrake_interactive.pm_.c:868
msgid "You'll need to reboot before the modification can take place"
msgstr "Muudatuste j�ustamiseks vajate alglaadimist"

#: ../../diskdrake_interactive.pm_.c:879
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Partitsiooni %s vormindamisel h�vivad sellel k�ik andmed"

#: ../../diskdrake_interactive.pm_.c:881
msgid "Formatting"
msgstr "Vormindan"

#: ../../diskdrake_interactive.pm_.c:882
#, c-format
msgid "Formatting loopback file %s"
msgstr "Vormindan loopback faili %s"

#: ../../diskdrake_interactive.pm_.c:883
#: ../../install_steps_interactive.pm_.c:419
#, c-format
msgid "Formatting partition %s"
msgstr "Vormindan partitsiooni %s"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Hide files"
msgstr "mkraid eba�nnestus"

#: ../../diskdrake_interactive.pm_.c:894
#, fuzzy
msgid "Move files to the new partition"
msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"

#: ../../diskdrake_interactive.pm_.c:895
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:906
#, fuzzy
msgid "Moving files to the new partition"
msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"

#: ../../diskdrake_interactive.pm_.c:910
#, c-format
msgid "Copying %s"
msgstr ""

#: ../../diskdrake_interactive.pm_.c:914
#, fuzzy, c-format
msgid "Removing %s"
msgstr "Kuvatihedus: %s\n"

#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
msgid "Device: "
msgstr "Seade: "

#: ../../diskdrake_interactive.pm_.c:938
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS kettat�his: %s (arvatavasti)\n"

#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
#: ../../diskdrake_interactive.pm_.c:1014
msgid "Type: "
msgstr "T��p: "

#: ../../diskdrake_interactive.pm_.c:946
msgid "Name: "
msgstr "Nimi: "

#: ../../diskdrake_interactive.pm_.c:954
#, c-format
msgid "Start: sector %s\n"
msgstr "Algus: sektor %s\n"

#: ../../diskdrake_interactive.pm_.c:955
#, c-format
msgid "Size: %s"
msgstr "Suurus: %s"

#: ../../diskdrake_interactive.pm_.c:957
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorit"

#: ../../diskdrake_interactive.pm_.c:959
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Silindrid %d kuni %d\n"

#: ../../diskdrake_interactive.pm_.c:960
msgid "Formatted\n"
msgstr "Vormindatud\n"

#: ../../diskdrake_interactive.pm_.c:961
msgid "Not formatted\n"
msgstr "Vormindamata\n"

#: ../../diskdrake_interactive.pm_.c:962
msgid "Mounted\n"
msgstr "�hendatud\n"

#: ../../diskdrake_interactive.pm_.c:963
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake_interactive.pm_.c:965
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "loopback fail(id): %s\n"

#: ../../diskdrake_interactive.pm_.c:966
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partitsioonilt toimub alglaadimine\n"
"    (MS-DOS-i, mitte lilo jaoks)\n"

#: ../../diskdrake_interactive.pm_.c:968
#, c-format
msgid "Level %s\n"
msgstr "Tase %s\n"

#: ../../diskdrake_interactive.pm_.c:969
#, c-format
msgid "Chunk size %s\n"
msgstr "�hiku suurus %s\n"

#: ../../diskdrake_interactive.pm_.c:970
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-kettad %s\n"

#: ../../diskdrake_interactive.pm_.c:972
#, c-format
msgid "Loopback file name: %s"
msgstr "loopback faili nimi: %s"

#: ../../diskdrake_interactive.pm_.c:975
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"V�imalik, et on tegemist\n"
"juhtpartitsiooniga, parem oleks\n"
"seda mitte puutuda.\n"

#: ../../diskdrake_interactive.pm_.c:978
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"See on eriline, alglaadimisel\n"
"kasutatav partitsioon, mis\n"
"v�imaldab mitme operratsioonis�steemi\n"
"laadimist.\n"

#: ../../diskdrake_interactive.pm_.c:997
#, c-format
msgid "Size: %s\n"
msgstr "Suurus: %s\n"

#: ../../diskdrake_interactive.pm_.c:998
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"

#: ../../diskdrake_interactive.pm_.c:999
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake_interactive.pm_.c:1000
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-kettad %s\n"

#: ../../diskdrake_interactive.pm_.c:1001
#, c-format
msgid "Partition table type: %s\n"
msgstr "Partitsioonitabeli t��p: %s\n"

#: ../../diskdrake_interactive.pm_.c:1002
#, c-format
msgid "on bus %d id %d\n"
msgstr "siinil %d id %d\n"

#: ../../diskdrake_interactive.pm_.c:1016
#, c-format
msgid "Options: %s"
msgstr "Eelistused: %s"

#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s vormindamine seadmel %s eba�nnestus"

#: ../../fs.pm_.c:506
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Ei oska seadet %s vormindada t��pi %s"

#: ../../fs.pm_.c:568
msgid "mount failed"
msgstr "�hendamine eba�nnestus"

#: ../../fs.pm_.c:588
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr ""

#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
msgid "mount failed: "
msgstr "�hendamine eba�nnestus: "

#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
#, c-format
msgid "error unmounting %s: %s"
msgstr "viga %s lahti �hendamisel: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "lihtne"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "server"

#: ../../fsedit.pm_.c:461
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "JFS ei ole kasutatav alla 16MB partisioonidel"

#: ../../fsedit.pm_.c:462
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "ReiserFS ei ole kasutatav alla 32MB partisioonidel"

#: ../../fsedit.pm_.c:471
msgid "Mount points must begin with a leading /"
msgstr "�henduspunktid peavad algama kaldkriipsuga (/)"

# c-format
#: ../../fsedit.pm_.c:472
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "�henduspunktile %s on juba �ks partitsioon m��ratud\n"

#: ../../fsedit.pm_.c:476
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Te ei saa �henduspunkti %s jaoks LVM loogilist ketast kasutada"

#: ../../fsedit.pm_.c:478
msgid "This directory should remain within the root filesystem"
msgstr "See kataloog peab j��ma kokku juurfailis�steemiga"

#: ../../fsedit.pm_.c:480
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr "See �henduspunkt vajab t�elist (ext2, reiserfs) failis�steemi\n"

#: ../../fsedit.pm_.c:596
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Seadme %s avamine kirjutamiseks eba�nnestus: %s"

#: ../../fsedit.pm_.c:681
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Tekkis viga: failis�steemi loomiseks ei leitud �htki seadet. Palun\n"
"kontrollige oma riistvara."

#: ../../fsedit.pm_.c:704
msgid "You don't have any partitions!"
msgstr "Teil ei ole �htki partitsiooni!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""

#: ../../help.pm_.c:41
#, fuzzy
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"�lalpool on toodud k�ik Teie k�vakettal olemasolevad Linuxi partitsioonid\n"
"Vaikimisi on need enamasti �sna m�istlikud. Kui teete nendes muutusi,\n"
"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga v�ikeste\n"
"partitsioonide puhul v�ib tekkida raskusi piisava hulga tarkvara "
"installimisel\n"
"Kasutajate jaoks on sageli m�istlik luua eraldi \"/home\" partitsioon.\n"
"\n"
"\n"
"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
"\n"
"\n"
"\"Nimi\" koosneb k�vakettat��bist, selle numbrist ja partitsiooni\n"
"numbrist (n�iteks \"hda1\").\n"
"\n"
"\n"
"K�vaketta t��p on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
"tegemist SCSI kettaga.\n"
"\n"
"\n"
"K�vaketta number on alati t�ht \"hd\" v�i \"sd\" j�rel. IDE ketastel:\n"
"\n"
"   * \"a\" - esmase IDE kontrolleri �lem,\n"
"\n"
"   * \"b\" - esmase IDE kontrolleri alluv,\n"
"\n"
"   * \"c\" - teisase IDE kontrolleri �lem,\n"
"\n"
"   * \"d\" - teisase IDE kontrolleri alluv.\n"
"\n"
"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
"knows if a selected package is located on another CDROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CDROM, you will first be\n"
"asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, "
"select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose "
"the\n"
"desired group(s).\n"
"\n"
" * \"Server\": finally, if the machine is intended to be a server, you will\n"
"be able to select which of the most common services you wish to see\n"
"installed on the machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Update\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""

#: ../../help.pm_.c:115
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""

#: ../../help.pm_.c:151
msgid ""
"If you wish to connect your computer to the Internet or to a local network,\n"
"please choose the correct option. Please turn on your device before\n"
"choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"Mandrake Linux proposes the configuration of an Internet connection at\n"
"installation time. Available connections are: traditional modem, ISDN\n"
"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
"(Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about Internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:172
#, fuzzy
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need."
msgstr ""
"N��d saate valida, milliseid teenused peaks s�steemi laadimisel k�ivitama.\n"
"\n"
"\n"
"Abiinfo balloonis antakse l�hike kirjeldus iga�he kohta neist.\n"
"\n"
"Kui kavatsete oma s�steemi kasutada serverina, olge eriti t�helepanelik:\n"
"t�en�oliselt ei soovi te k�ivitada mittevajalikke teenuseid."

#: ../../help.pm_.c:188
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
"local time according to the time zone you selected."
msgstr ""
"Linuxil on kombeks hoida sisemist kella Greenwichi (GMT) ajas ja muuta\n"
"vajadusel s�steemi kella vastavalt Teie valitud ajav��ndile."

#: ../../help.pm_.c:192
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
"the next step. If you cannot see the message, it simply means that the\n"
"configuration was wrong and the test will automatically end after 10\n"
"seconds, restoring the screen."
msgstr ""

#: ../../help.pm_.c:212
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""

#: ../../help.pm_.c:224
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:231
msgid ""
"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
"the prompt. But in case your computer cannot boot from the CDROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector "
"(MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard "
"disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""

#: ../../help.pm_.c:255
#, fuzzy
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this "
"procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""
"Olete j�udnud punkti, kus peate otsustama, kuhu t�pselt Mandrake Linux oma\n"
"k�vakettal paigaldada. Kui k�vaketas on t�hi v�i kui m�ni muu \n"
"operatsioonis�steem seda t�ielikult kasutab, on vaja partitsioneerida.\n"
"Partitsioneerimine on tegevus, mille k�igus tekitatakse kettale loogilised\n"
"piirkonnad Teie uue Mandrake Linux s�steemi installimiseks.\n"
"\n"
"\n"
"Kuna partitsioneerimine ei ole p��ratav protsess, siis peab kogemusteta\n"
"kasutaja olema ise�ranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n"
"vigade v�hendamiseks on Teie jaoks loodudki k�esolev abimees. Siiski,\n"
"palun varuga natuke ettevalmistusaega\n"
"\n"
"\n"
"Mandrake Linux jaoks on Teil vaja v�hemalt kaht partitsiooni. �hele "
"paigutatakse\n"
"operatsioonis�steem ise ja teisele luuakse virtuaalm�lu (saaleala e. swap).\n"
"\n"
"\n"
"Kui partitsioonid on juba loodud (eelmise installi v�i m�ne muu vahendi\n"
"abil), siis peate need lihtsalt Linuxi paigaldamise jaoks v�lja valima.\n"
"\n"
"\n"
"Kui partitsioone ei ole varem loodud, peate kasutama �lalttoodud abimeest.\n"
"Abimees hindab Teie k�vaketast ja pakub j�rgmised valikud:\n"
"\n"
"* Kasuta olemasolevaid partitsioone: abimees leidis kettalt Linuxi "
"partitsioonid.\n"
"  Kui soovite neid kasutada, valige see.\n"
"\n"
"\n"
"* Puhasta kogu ketas: kui soovite alustada Mandrake Linux installimist "
"t�iesti t�hjale kettale.\n"
"  T�helepanu: k�ik andmed, mis enne kettal olid, h�vivad!\n"
"\n"
"\n"
"* Kasuta vaba ruumi Windowsi partitsioonil: kui Microsoft Windows kasutab "
"kogu Teie k�vaketta vaba pinna,\n"
"  saate luua lisaruumi Windowsi partitsiooni suuruse muutmisel.\n"
"  Sageli on see m�istlik, kui soovite kasutada ka Windowst.\n"
"\n"
"* Asjatundja: kui soovite ise oma k�vaketast jagada, valige see. Nii on Teil "
"k�ige rohkem v�imalusi,\n"
"  aga ka k�ige rohkem ohtusid! �rge valige seda, kui Te t�pselt ei tea, mida "
"teete."

#: ../../help.pm_.c:319
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:350
#, fuzzy
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""
"K�ik v�rskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
"ehk sinna tuleb luua failis�steemid.\n"
"\n"
"\n"
"Samuti v�ib vormindada varem olemas olnud partitsioonid, kui soovite\n"
"seal leiduvad andmed �ra kustutada.\n"
"\n"
"\n"
"Paneme t�hele, et alati ei ole k�igi vanade partitsioonide vormindamine\n"
"vajalik.\n"
"Kindlasti v�ib vormindada partitsioone, kus varem asus \"/\", \"/usr\"\n"
"v�i \"/var\" aga kasutajate faile sisaldav \"/home\" v�iks j��da\n"
"alles.\n"
"\n"
"\n"
"Klikkige \"OK\", kui olete vormindamiseks valmis."

#: ../../help.pm_.c:376
#, fuzzy
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""
"Teie Mandrake Linux s�steemi hakati n��d installima. Selleks v�ib\n"
"olenevalt Teie poolt valitud pakettide arvust ja Teie arvuti kiirusest\n"
"kuluda m�nik�mmend minutit.\n"
"\n"
"\n"
"Palun veidi kannatlikkust."

#: ../../help.pm_.c:384
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""

#: ../../help.pm_.c:391
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:401
#, fuzzy
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Reload\": you can use this option if you wish to undo all changes and\n"
"load your initial partitions table.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition "
"your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Restore from floppy\": this option will allow you to restore a\n"
"previously saved partition table from floppy disk.\n"
"\n"
" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
"later partition-table recovery if necessary. It is strongly recommended to\n"
"perform this step.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"N��d peate valima partitsiooni(d), kuhu soovite Mandrake Linux installida.\n"
"\n"
"Partitsioon on loogiliselt eraldatud k�vaketta piirkond, mille suurust\n"
"ei ole v�imalik hiljem, t��tavas s�steemis enam muuta. Samuti h�vivad\n"
"partitsiooni kustutamisel k�ik sellel sisalduvad andmed.\n"
"\n"
"Et muuta seda tegevust lihtsamaks, on loodud Abimees, mille soovitused\n"
"on harilikult m�istlikud.\n"
"\n"
"\n"
"Partitsioonide loomiseks valige esmalt k�vaketas.\n"
"\n"
"\n"
"Valitud ketta partitsioneerimiseks on j�rgmised v�imalused:\n"
"\n"
"   * Puhasta k�ik: kustutatakse k�ik olemasolevad partitsioonid sellel "
"kettal\n"
"\n"
"\n"
"   * Paiguta ise: sel juhul tekitatakse Linuxi jaoks vajalikud partitsioonid "
"vabale kettapinnale automaatselt.\n"
"\n"
"\n"
"   * P��sta partitsioonitabel: kui partitsioonitabel on vigastatud, v�ib "
"proovida seda parandada. \n"
"     Palun �rge sellega igaks juhuks palju arvestage.\n"
"\n"
"\n"
"   * Lae uuesti: kui soovite t�histada k�ik enda tehtud muutused ja alustada "
"algse partitsioonitabeliga\n"
"\n"
"\n"
"   * Abimees: kui soovite uue partitsioonitabeli loomisel samm-sammulist "
"juhatust.\n"
"     Soovitav, kui ei ole varem midagi sellist teinud.\n"
"\n"
"\n"
"   * Taasta flopilt: kui olete varem salvestanud koopia "
"partitsioonitabelist\n"
"     flopile, tuleb see n��d kasuks\n"
"\n"
"\n"
"   * Salvesta flopile: kui soovite salvestada partitsioonitabeli flopile, "
"et\n"
"     vajadusel oleks v�imalik sealt taastada.\n"
"\n"
"\n"
"   * Tehtud: kui olete partitsioneerimise l�petanud, siis saate muutused "
"n��d salvestada\n"
"\n"
"\n"
"Valitud partitsioonil on v�imalikud j�rgmised tegevused:\n"
"\n"
"           * Ctrl-c uue partitsiooni loomine\n"
"\n"
"           * Ctrl-d partitsiooni kustutamine\n"
"\n"
"           * Ctrl-m �henduspunkti seadmine"

#: ../../help.pm_.c:460
#, fuzzy
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Teie arvuti k�vakettal on rohkem kui �ks Microsoft Windows partitsioon.\n"
"Palun valige v�lja see, mille suurust soovite Mandrake Linux jaoks muuta.\n"
"\n"
"\n"
"Teie abistamiseks on iga partitsioonidel n�idatud \"Nimi Linuxis\", \"Nimi "
"Windowsis\" ja \"Mahutavus\".\n"
"\n"
"\"Nimi Linuxis\" koosneb k�vakettat��bist, selle numbrist ja partitsiooni\n"
"numbrist (n�iteks \"hda1\").\n"
"\n"
"\n"
"K�vaketta t��p on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
"tegemist SCSI kettaga.\n"
"\n"
"\n"
"K�vaketta number on alati t�ht \"hd\" v�i \"sd\" j�rel. IDE ketastel:\n"
"\n"
"   * \"a\" - esmase IDE kontrolleri �lem,\n"
"\n"
"   * \"b\" - esmase IDE kontrolleri alluv,\n"
"\n"
"   * \"c\" - teisase IDE kontrolleri �lem,\n"
"\n"
"   * \"d\" - teisase IDE kontrolleri alluv.\n"
"\n"
"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
"\n"
"\n"
"\"Nimi Windowsis\" on t�ht, millega Microsoft Windows vastavat seadet\n"
"t�histab."

#: ../../help.pm_.c:491
msgid "Please be patient. This operation can take several minutes."
msgstr "Palun natuke kannatust. Selleks v�ib kuluda m�nigi minut."

#: ../../help.pm_.c:494
#, fuzzy
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
"existing system.\n"
"\n"
"Please choose \"Install\" if there are no previous version of Mandrake\n"
"Linux installed or if you wish to boot between various operating systems.\n"
"\n"
"Please choose \"Update\" if you wish to update or repair an already\n"
"installed version of Mandrake Linux.\n"
"\n"
"Depending on your knowledge of GNU/Linux, please choose one of the\n"
"following to install or update your Mandrake Linux operating system:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""
"Palun valige \"Installimine\" kui Teie arvutis ei ole varasemat Mandrake "
"Linux\n"
"versiooni.\n"
"\n"
"\n"
"Palun valige \"Uuendamine\" kui soovite uuendada varasemat Mandrake Linux "
"versiooni.\n"
"\n"
"\n"
"S�ltuvalt Teie GNU/Linuxi alastest teadmistest saate valida erineva tasemega "
"installi- v�i uuendusmeetodi:\n"
"\n"
"* Soovituslik: Te ei ole varem GNU/Linuxit installinud. K�ik tehakse "
"lihtsaks ja esitatakse v�he k�simusi\n"
"\n"
"\n"
"* Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada vastavalt\n"
"  Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie arvuti \n"
"  edaspidisest kasutusalast.\n"
"\n"
"\n"
"* Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
"  s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
"  Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA TEETE!"

#: ../../help.pm_.c:521
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""

#: ../../help.pm_.c:534
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""

#: ../../help.pm_.c:547
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"RETURN to \"Cancel\" and choose again."
msgstr ""

#: ../../help.pm_.c:560
#, fuzzy
msgid ""
"Please select the correct port. For example, the COM1 port under MS Windows\n"
"is named ttyS0 under GNU/Linux."
msgstr ""
"Palun valige �ige port. N�iteks MS Windows-i COM1 kannab GNU/Linuxis\n"
"nime ttyS0."

#: ../../help.pm_.c:564
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:600
msgid ""
"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
"boot\n"
"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"GRUB\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu "
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"Mandrake Linux installs its own boot loader, which will let you boot either\n"
"GNU/Linux or any other operating systems which you have on your system.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Double-clicking on an existing entry allows you to change\n"
"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
"on to the next installation step."
msgstr ""

#: ../../help.pm_.c:647
#, fuzzy
msgid ""
"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (ehk LInux LOader) ja Grub on alglaadurid: nad v�imaldavad laadida\n"
"kas GNU/Linuxi v�i m�ne muu Teie arvutis olevad operatsioonis�steemi.\n"
"Tavaliselt tuvastakse teised operatsioonis�steemid �igesti ja seadistatakse\n"
"ka alglaadur. Kui Teil aga ei ole �nne, tuleb parameetrid seada\n"
"k�sitsi. Olge sel juhul hoolas valima �iged."

#: ../../help.pm_.c:658
#, fuzzy
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"N��d peate valima, milliselt kettaosalt soovite GNU/Linuxit laadida.\n"
"\n"
"Valige \"K�vaketta esimene sektor (MBR)\", kui ei tea t�pselt, mida\n"
"teha."

#: ../../help.pm_.c:665
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
"a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""

#: ../../help.pm_.c:693
#, fuzzy
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting information on your\n"
"hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""
"Esmalt otsib DrakX PCI siini SCSI liideseid. Kui neid leitakse, ja \n"
"vastav(ad) juhtprogramm(id) on teada, siis laetakse ja installitakse \n"
"k�ik vajalik automaatselt.\n"
"\n"
"\n"
"Kui Teie SCSI liides kasutab ISA siini v�i kui DrakX ei tea,\n"
"millist juhtprogrammi kasutada v�i Teil ei ole �ldse SCSI liidest,\n"
"siis k�sitakse Teilt selle kohta.\n"
"Kui Teil SCSI liidest t�esti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
"on, siis vastake \"Jah\". Seej�rel lastakse Teil nimekirjast sobiv\n"
"juhtprogramm valida.\n"
"\n"
"\n"
"Kui olete juhtprogrammi v�lja valinud, on Teil v�imalus anda sellele\n"
"ka parameetreid. Siiski, enamasti l�heb k�ik kenasti ka ilma neid\n"
"sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
"\n"
"Kui automaatne parameetrite otsimine ei t��ta, tutvuge palun l�hemalt\n"
"oma SCSI liidese dokumentatsiooniga v�i k�sige abi riistvara m��jalt.\n"
"Vaadake ka User Guide'i (peat�kk 2, l�ik \"Collective informations on your\n"
"hardware\")\n"
"Ka samas masinas olev Windows oskab vahel SCSI kohta kasulikku \n"
"informatsiooni anda."

#: ../../help.pm_.c:720
#, fuzzy
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot "
"prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr ""
"You can add additional entries for yaboot, either for other operating "
"systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"\n"
"For other OS's - the entry consists only of a label and the root partition.\n"
"\n"
"\n"
"For Linux, there are a few possible options: \n"
"\n"
"\n"
"  - Label: This is simply the name will type at the yaboot prompt to select "
"this \n"
"boot option.\n"
"\n"
"\n"
"  - Image: This would be the name of the kernel to boot.  Typically vmlinux "
"or\n"
"a variation of vmlinux with an extension.\n"
"\n"
"\n"
"  - Root: The root device or '/' for your Linux installation.\n"
"\n"
"\n"
"  \n"
"  - Append: On Apple hardware, the kernel append option is used quite often "
"to\n"
"assist in initializing video hardware, or to enable keyboard mouse button "
"emulation\n"
"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse.  The "
"following \n"
"are some examples:\n"
"\n"
"\n"
"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
"\n"
"\n"
" \n"
"  - Initrd: This option can be used either to load initial modules, before "
"the boot \n"
"device is available, or to load a ramdisk image for an emergency boot "
"situation.\n"
"\n"
"\n"
"  - Initrd-size: The default ramdisk size is generally 4096 bytes.  If you "
"should need\n"
"to allocate a large ramdisk, this option can be used.\n"
"\n"
"\n"
"  - Read-write: Normally the 'root' partition is initially brought up read-"
"only, to allow\n"
"a filesystem check before the system becomes 'live'.  You can override this "
"option here.\n"
"\n"
"\n"
"  - NoVideo: Should the Apple video hardware prove to be exceptionally "
"problematic, you can\n"
"select this option to boot in 'novideo' mode, with native framebuffer "
"support.\n"
"\n"
"\n"
"  - Default: Selects this entry as being the default Linux selection, "
"selectable by just\n"
"pressing ENTER at the yaboot prompt.  This entry will also be highlighted "
"with a '*', if you\n"
"press TAB to see the boot selections."

#: ../../help.pm_.c:765
#, fuzzy
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required "
"to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful as to choose the correct parameters.\n"
"\n"
"\n"
"Yaboot main options are:\n"
"\n"
"\n"
"  - Init Message: A simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
"\n"
"  - Boot Device: Indicate where you want to place the information required "
"to \n"
"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
"earlier \n"
"to hold this information.\n"
"\n"
"\n"
"  - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
"yaboot.  The first delay is measured in seconds and at this point you can \n"
"choose between CD, OF boot, MacOS, or Linux.\n"
"\n"
"\n"
"  - Kernel Boot Timeout: This timeout is similar to the LILO boot delay.  "
"After \n"
"selecting Linux, you will have this delay in 0.1 seconds before your "
"default\n"
"kernel description is selected.\n"
"\n"
"\n"
"  - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
"CD at\n"
"the first boot prompt.\n"
"\n"
"\n"
"  - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
"\n"
"  - Default OS: You can select which OS will boot by default when the Open "
"Firmware \n"
"Delay expires."

#: ../../help.pm_.c:798
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
"button to change it if necessary.\n"
"\n"
" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
"click on the button to change that if necessary.\n"
"\n"
" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
"the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:827
#, fuzzy
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"Valige k�vaketas, mida soovite Mandrake Linux installimiseks puhastada\n"
"Ettevaatust, k�ik sellel leiduvad andmed h�vitatakse ja ei ole enam\n"
"taastatavad."

#: ../../help.pm_.c:832
#, fuzzy
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Valige \"OK\" kui soovite kustutada k�ik sellel kettal asuvad "
"partitsioonid.\n"
"Ettevaatust, peale \"OK\" klikkimist ei ole enam v�imalik sellelt kettalt\n"
"andmeid taastada.\n"
"\n"
"\n"
"Katkestamiseks valige \"Katkesta\"."

#: ../../install2.pm_.c:114
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is missing)"
msgstr ""

#: ../../install_any.pm_.c:421
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: ../../install_any.pm_.c:457
msgid "Can't use broadcast with no NIS domain"
msgstr "�ldlevi kasutamine on ilma NIS domeenita v�imatu"

#: ../../install_any.pm_.c:793
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Pane FAT formaadis flopi seadmesse %s"

#: ../../install_any.pm_.c:797
msgid "This floppy is not FAT formatted"
msgstr "See flopi ei ole FAT formaadis"

#: ../../install_any.pm_.c:809
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Et kasutada seda paketivalikut, alustage installimist k�sureaga \"linux "
"defcfg=floppy\""

#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
#, c-format
msgid "Error reading file %s"
msgstr "Viga faili %s lugemisel"

#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
msgid "Ok"
msgstr "OK"

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Osa teie riistvarast n�uab tarnijapoolseid juhtprogramme.\n"
"Informatsiooni nende kohta saate: %s"

#: ../../install_interactive.pm_.c:44
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Teil peab olema juurpartitsioon.\n"
"Selleks looge uus partitsioon (v�i valige �ks olemasolevatest).\n"
"Siis valige tegevus \"�henduspunkt\" ja seadke see kui '/'"

#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "Teil peab olema saaleala"

#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Saaleala ei ole m��ratud\n"
"\n"
"J�tkate ikkagi?"

#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
#, fuzzy
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Teil peab olema saaleala"

#: ../../install_interactive.pm_.c:76
msgid "Use free space"
msgstr "Kasuta vaba ruumi"

#: ../../install_interactive.pm_.c:78
msgid "Not enough free space to allocate new partitions"
msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"

#: ../../install_interactive.pm_.c:86
msgid "Use existing partition"
msgstr "Kasuta olemasolevat partitsiooni"

#: ../../install_interactive.pm_.c:88
msgid "There is no existing partition to use"
msgstr "Kasutatavat partitsiooni ei leitud"

#: ../../install_interactive.pm_.c:95
msgid "Use the Windows partition for loopback"
msgstr "Kasuta Windowsi partitsiooni loopback-ina"

#: ../../install_interactive.pm_.c:98
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Millisele partitsioonile soovite installida Linux4Win?"

#: ../../install_interactive.pm_.c:100
msgid "Choose the sizes"
msgstr "Valige suurused"

#: ../../install_interactive.pm_.c:101
msgid "Root partition size in MB: "
msgstr "Juurpartitsiooni suurus (MB): "

#: ../../install_interactive.pm_.c:102
msgid "Swap partition size in MB: "
msgstr "Saaleala suurus (MB): "

#: ../../install_interactive.pm_.c:111
msgid "Use the free space on the Windows partition"
msgstr "Kasuta vaba ruumi Windowsi partitsioonil"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to resize?"
msgstr "Mis partitsiooni soovite muuta?"

#: ../../install_interactive.pm_.c:116
msgid "Computing Windows filesystem bounds"
msgstr "Arvutan Windowsi failis�steemi piire"

#: ../../install_interactive.pm_.c:119
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"FAT partitsiooni suurust ei �nnestu muuta, \n"
"ilmnes selline viga: %s"

#: ../../install_interactive.pm_.c:122
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr ""
"Teie Windowsi partitsioon on fragmenteerunud, palun kasutada 'defrag'-i"

#: ../../install_interactive.pm_.c:123
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"HOIATUS!\n"
"\n"
"DrakX hakkab Teie Windowsi partitsiooni suurust muutma. Olge ettevaatlik:\n"
"see operatsioon v�ib olla ohtlik Teie failidele. Palun kasutage enne\n"
"scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
"Kui olete oma otsuses kindel, vajutage OK."

#: ../../install_interactive.pm_.c:132
msgid "Which size do you want to keep for windows on"
msgstr "Kui palju ruumi j�tate Windowsi jaoks?"

#: ../../install_interactive.pm_.c:133
#, c-format
msgid "partition %s"
msgstr "Partitsioon %s"

#: ../../install_interactive.pm_.c:139
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Suuruse muutmine eba�nnestus: %s"

#: ../../install_interactive.pm_.c:154
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr "Sobivat FAT partitsiooni ei leitud (ei ole piisavalt ruumi)"

#: ../../install_interactive.pm_.c:160
msgid "Erase entire disk"
msgstr "T�hjenda kogu ketas"

#: ../../install_interactive.pm_.c:160
msgid "Remove Windows(TM)"
msgstr "Eemalda Windows(TM)"

#: ../../install_interactive.pm_.c:163
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Teil on rohkem kui �ks k�vaketas, millisele neis installite Linuxi?"

#: ../../install_interactive.pm_.c:166
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Kettal %s h�vivad K�IK partitsioonid ja andmed"

#: ../../install_interactive.pm_.c:174
msgid "Custom disk partitioning"
msgstr "Partitsioneerin ise"

#: ../../install_interactive.pm_.c:178
msgid "Use fdisk"
msgstr "Kasuta fdisk-i"

#: ../../install_interactive.pm_.c:181
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"N��d saate partitsioneerida %s k�vaketta\n"
"Kui olete valmis, salvestage k�suga 'w'"

#: ../../install_interactive.pm_.c:210
msgid "You don't have enough free space on your Windows partition"
msgstr "Teil ei ole piisavalt vaba ruumi Windowsi partitsioonil"

#: ../../install_interactive.pm_.c:226
msgid "I can't find any room for installing"
msgstr "Installimiseks ei ole �ldse ruumi"

#: ../../install_interactive.pm_.c:230
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX kettajagamise abimees leidis sellised lahendused:"

#: ../../install_interactive.pm_.c:235
#, c-format
msgid "Partitioning failed: %s"
msgstr "Ketta jagamine eba�nnestus: %s"

#: ../../install_interactive.pm_.c:241
msgid "Bringing up the network"
msgstr "K�ivitame v�rguliidesed"

#: ../../install_interactive.pm_.c:246
msgid "Bringing down the network"
msgstr "Seiskame v�rguliidesed"

#: ../../install_steps.pm_.c:73
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
"J�tkake omal vastutusel."

#: ../../install_steps.pm_.c:207
#, c-format
msgid "Duplicate mount point %s"
msgstr "�henduspunkt %s on m��ratud topelt"

#: ../../install_steps.pm_.c:384
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"M�ned t�htsad paketid ei saanud korralikult paika.\n"
"Teie CD-lugeja v�i CD on ilmselt vigane.\n"
"Paketifaile CD-l saate kontrollida k�suga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: ../../install_steps.pm_.c:459
#, c-format
msgid "Welcome to %s"
msgstr "See ongi %s"

#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
msgid "No floppy drive available"
msgstr "Flopiseade ei ole k�ttesaadav"

#: ../../install_steps_auto_install.pm_.c:77
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "J�rgmine samm: '%s'\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "Valige paigalduse maht"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "Suurus kokku: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
#, c-format
msgid "Version: %s\n"
msgstr "Versioon: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
#, c-format
msgid "Size: %d KB\n"
msgstr "Suurus: %d kB\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
#: ../../install_steps_interactive.pm_.c:509
msgid "Choose the packages you want to install"
msgstr "Valige paketid installimiseks"

#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
msgid "Info"
msgstr "Info"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
#: ../../install_steps_interactive.pm_.c:212
msgid "Install"
msgstr "Installimine"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
#: ../../install_steps_interactive.pm_.c:695
msgid "Installing"
msgstr "Installin"

#: ../../install_steps_graphical.pm_.c:499
msgid "Please wait, "
msgstr "Palun oodake, "

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
msgid "Time remaining "
msgstr "Aega j��nud "

#: ../../install_steps_graphical.pm_.c:502
msgid "Total time "
msgstr "Aega kokku "

#: ../../install_steps_graphical.pm_.c:507
#: ../../install_steps_interactive.pm_.c:695
msgid "Preparing installation"
msgstr "Valmistun installimiseks"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
#, c-format
msgid "Installing package %s"
msgstr "Paketi %s installimine"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
#: ../../install_steps_gtk.pm_.c:646
msgid "Go on anyway?"
msgstr "Ikkagi edasi?"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
msgid "There was an error ordering packages:"
msgstr "Pakettide tellimisel tekkis viga:"

#: ../../install_steps_graphical.pm_.c:577
msgid "Use existing configuration for X11?"
msgstr "Kasutada olemasolevat X-i seadistust?"

#: ../../install_steps_gtk.pm_.c:148
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Teie s�steemil on ressursiprobleeme ja installimine v�ib eba�nnestuda.\n"
"Kui nii juhtub, proovige palun tekstip�hjalist paigaldust. Selleks \n"
"vajutaga laadimisel F1 ja sisestage 'text'"

#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
msgid "Install Class"
msgstr "Installi klass"

#: ../../install_steps_gtk.pm_.c:162
msgid "Please, choose one of the following classes of installation:"
msgstr "Palun valige �ks j�rgnevatest paigaldusklassidest"

#: ../../install_steps_gtk.pm_.c:228
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "Teie poolt valitud gruppide kogusuurus on umbes %d MB.\n"

#: ../../install_steps_gtk.pm_.c:230
#, c-format
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"Kui soovite installida sellest v�hem, valige vastav protsent.\n"
"\n"
"Madalama protsendi puhul installitakse vaid k�ige t�htsamad paketid;\n"
"100%% t�hendab k�ige valitud pakettide installimist."

#: ../../install_steps_gtk.pm_.c:235
#, fuzzy, c-format
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"Teil on kettal ruumi vaid %d%% pakettide jaoks.\n"
"\n"
"Kui soovite sellest v�hem, valige v�iksem protsent ja installimisele\n"
"kuuluvad vaid olulisemad paketid."

#: ../../install_steps_gtk.pm_.c:241
msgid "You will be able to choose them more specifically in the next step."
msgstr "T�psemalt saate valida j�rgmisel sammul"

#: ../../install_steps_gtk.pm_.c:243
msgid "Percentage of packages to install"
msgstr "Installitavate pakettide protsent"

#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
msgid "Package Group Selection"
msgstr "Paketigruppide valik"

#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
msgid "Individual package selection"
msgstr "Valik paketthaaval"

#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Suurus kokku: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:385
msgid "Bad package"
msgstr "Vigane pakett"

#: ../../install_steps_gtk.pm_.c:386
#, c-format
msgid "Name: %s\n"
msgstr "Nimi: %s\n"

#: ../../install_steps_gtk.pm_.c:389
#, c-format
msgid "Importance: %s\n"
msgstr "T�htsus: %s\n"

#: ../../install_steps_gtk.pm_.c:411
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Seda paketti ei saa valida, kettaruumi ei ole paigalsuseks piisavalt"

#: ../../install_steps_gtk.pm_.c:416
msgid "The following packages are going to be installed"
msgstr "Installimiseks on valitud j�rgmised paketid"

#: ../../install_steps_gtk.pm_.c:417
msgid "The following packages are going to be removed"
msgstr "Eemaldamiseks on valitud j�rgmised paketid"

#: ../../install_steps_gtk.pm_.c:429
msgid "You can't select/unselect this package"
msgstr "Seda paketti ei saa (mitte) valida"

#: ../../install_steps_gtk.pm_.c:441
msgid "This is a mandatory package, it can't be unselected"
msgstr "See pakett on kohustuslik"

#: ../../install_steps_gtk.pm_.c:443
msgid "You can't unselect this package. It is already installed"
msgstr "See pakett on juba installitud"

#: ../../install_steps_gtk.pm_.c:447
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"Selle paketi peaks uuendame\n"
"Olete kindel, et Te ei vali seda?"

#: ../../install_steps_gtk.pm_.c:451
msgid "You can't unselect this package. It must be upgraded"
msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"

#: ../../install_steps_gtk.pm_.c:456
msgid "Show automatically selected packages"
msgstr "N�ita automaatselt valitud pakette"

#: ../../install_steps_gtk.pm_.c:460
#, fuzzy
msgid "Load/Save on floppy"
msgstr "Salvesta flopile"

#: ../../install_steps_gtk.pm_.c:461
#, fuzzy
msgid "Updating package selection"
msgstr "Salvest paketivalik"

#: ../../install_steps_gtk.pm_.c:466
#, fuzzy
msgid "Minimal install"
msgstr "Eemaldamine"

#: ../../install_steps_gtk.pm_.c:503
msgid "Estimating"
msgstr "Oletan"

#: ../../install_steps_gtk.pm_.c:522
msgid "Please wait, preparing installation"
msgstr "Palun oodake, valmistun installimiseks"

#: ../../install_steps_gtk.pm_.c:553
#, c-format
msgid "%d packages"
msgstr "%d paketti"

#: ../../install_steps_gtk.pm_.c:599
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Hoiatus\n"
"\n"
"Palun lugege hoolega alltoodud teksti. Kui Te ei ole k�igi allj�rgnevate\n"
"v�idetega, on installimine j�rgmise CD pealt keelatud. Vajutage 'Keeldun', \n"
"et j�tkata installimist ilma selle CD-ta.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Accept"
msgstr "N�us"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Refuse"
msgstr "Keeldun"

#: ../../install_steps_gtk.pm_.c:628
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Vahetage CD!\n"
"\n"
"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <OK>.\n"
"Kui teil s�herdust ei ole, vajutage <Katkesta>"

#: ../../install_steps_gtk.pm_.c:646
msgid "There was an error installing packages:"
msgstr "Pakettide installimisel tekkis viga:"

#: ../../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "Tekkis mingi viga"

#: ../../install_steps_interactive.pm_.c:71
msgid "License agreement"
msgstr "L�ppkasutaja litsentsileping"

#: ../../install_steps_interactive.pm_.c:72
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"J�rgnev l�ppkasutaja litsents on eksimuste v�ltimiseks originaalkeeles\n"
"\n"
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:168
#: ../../install_steps_interactive.pm_.c:871
#: ../../standalone/keyboarddrake_.c:28
msgid "Keyboard"
msgstr "Klaviatuur"

#: ../../install_steps_interactive.pm_.c:169
#: ../../standalone/keyboarddrake_.c:29
msgid "Please, choose your keyboard layout."
msgstr "Palun valige klaviatuuriasetus"

#: ../../install_steps_interactive.pm_.c:170
msgid "Here is the full list of keyboards available"
msgstr "V�imalike klaviatuuride t�ielik nimekiri"

#: ../../install_steps_interactive.pm_.c:187
msgid "Which installation class do you want?"
msgstr "Millist installi klassi Te soovite"

#: ../../install_steps_interactive.pm_.c:189
msgid "Install/Update"
msgstr "Installimine/Uuendus"

#: ../../install_steps_interactive.pm_.c:189
msgid "Is this an install or an update?"
msgstr "On see installimine v�i taastamine?"

#: ../../install_steps_interactive.pm_.c:198
msgid "Recommended"
msgstr "Soovituslik"

#: ../../install_steps_interactive.pm_.c:201
#: ../../install_steps_interactive.pm_.c:204
msgid "Expert"
msgstr "Ekspert"

#: ../../install_steps_interactive.pm_.c:212
msgid "Update"
msgstr "Uuendus"

#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
msgid "Please, choose the type of your mouse."
msgstr "Palun valige hiire t��p"

#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
msgid "Mouse Port"
msgstr "Hiire port"

#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Millisesse seerialporti on Teie hiir �hendatud?"

#: ../../install_steps_interactive.pm_.c:239
msgid "Buttons emulation"
msgstr "Nuppude teesklemine"

#: ../../install_steps_interactive.pm_.c:241
msgid "Button 2 Emulation"
msgstr "Teeskle 2 hiirenupp"

#: ../../install_steps_interactive.pm_.c:242
msgid "Button 3 Emulation"
msgstr "Teeskle 3 hiirenuppu"

#: ../../install_steps_interactive.pm_.c:261
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIA kaartide seadmine..."

#: ../../install_steps_interactive.pm_.c:261
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:266
msgid "Configuring IDE"
msgstr "IDE seadistamine"

#: ../../install_steps_interactive.pm_.c:266
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:281
msgid "no available partitions"
msgstr "ei leia partitsioone"

#: ../../install_steps_interactive.pm_.c:284
msgid "Scanning partitions to find mount points"
msgstr "Otsin partitsioonidelt �henduspunkte"

#: ../../install_steps_interactive.pm_.c:292
msgid "Choose the mount points"
msgstr "Valige �henduspunktid"

#: ../../install_steps_interactive.pm_.c:311
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
"Proovin loetamatud kirjed puhastada kuid ANDMED NENDEL H�VIVAD.\n"
"Teine v�imalus on keelata DrakX-il partitsioonitabeli muutmine.\n"
"(Viga oli selline: %s)\n"
"Kas olete n�us partitsioonide kaotamisega?\n"

#: ../../install_steps_interactive.pm_.c:324
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake ei saanud partitsioonitabeli lugemisega hakkama.\n"
"J�tkate omal vastutusel!"

#: ../../install_steps_interactive.pm_.c:340
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: ../../install_steps_interactive.pm_.c:349
#, fuzzy
msgid "No root partition found to perform an upgrade"
msgstr "Juurpartitsiooni ei leitud"

#: ../../install_steps_interactive.pm_.c:350
msgid "Root Partition"
msgstr "Juurpartitsioon"

#: ../../install_steps_interactive.pm_.c:351
msgid "What is the root partition (/) of your system?"
msgstr "Millisel partitsioonil hoiate juurkataloogi (/)?"

#: ../../install_steps_interactive.pm_.c:365
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Partitsioonitabeli s�ilitamiseks vajate alglaadimist"

#: ../../install_steps_interactive.pm_.c:389
msgid "Choose the partitions you want to format"
msgstr "Valige partitsioonid, mida soovite vormindada"

#: ../../install_steps_interactive.pm_.c:390
msgid "Check bad blocks?"
msgstr "Blokkide kontroll?"

#: ../../install_steps_interactive.pm_.c:416
msgid "Formatting partitions"
msgstr "Vormindan partitsioone"

#: ../../install_steps_interactive.pm_.c:418
#, c-format
msgid "Creating and formatting file %s"
msgstr "Loon ja vormindan faili %s"

#: ../../install_steps_interactive.pm_.c:421
msgid "Not enough swap to fulfill installation, please add some"
msgstr "Saaleala on installimiseks liiga v�ike, palun lisage"

#: ../../install_steps_interactive.pm_.c:427
msgid "Looking for available packages"
msgstr "Otsin k�ttesaadavaid pakette"

#: ../../install_steps_interactive.pm_.c:433
msgid "Finding packages to upgrade"
msgstr "Otsin uuendatavaid pakette"

#: ../../install_steps_interactive.pm_.c:450
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr "Teie k�vakettal ei ole piisavalt vaba ruumi (%d > %d)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Complete (%dMB)"
msgstr "T�ielik (%d MB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Minimum (%dMB)"
msgstr "Minimaalne (%d MB)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Recommended (%dMB)"
msgstr "Soovitatav (%d MB)"

#: ../../install_steps_interactive.pm_.c:475
msgid "Custom"
msgstr "Isetehtud"

#: ../../install_steps_interactive.pm_.c:522
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: ../../install_steps_interactive.pm_.c:525
#, fuzzy
msgid "Load from floppy"
msgstr "Taasta flopilt"

#: ../../install_steps_interactive.pm_.c:527
#, fuzzy
msgid "Loading from floppy"
msgstr "Taasta flopilt"

#: ../../install_steps_interactive.pm_.c:527
#, fuzzy
msgid "Package selection"
msgstr "Paketigruppide valik"

#: ../../install_steps_interactive.pm_.c:532
#, fuzzy
msgid "Insert a floppy containing package selection"
msgstr "Pane flopi seadmesse %s"

#: ../../install_steps_interactive.pm_.c:544
msgid "Save on floppy"
msgstr "Salvesta flopile"

#: ../../install_steps_interactive.pm_.c:605
msgid "Selected size is larger than available space"
msgstr ""

#: ../../install_steps_interactive.pm_.c:670
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Kui Teil on olemas k�ik alltoodud CD-d, klikkige <OK>.\n"
"Kui Teil ei ole �htki neist, klikkige <Katkesta>.\n"
"Kui puuduvad m�ned CD-d, m�rkige vaid olemasolevad ja siis <OK>."

#: ../../install_steps_interactive.pm_.c:675
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "CD pealdisega \"%s\""

#: ../../install_steps_interactive.pm_.c:704
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Paketi %s installimine\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:713
msgid "Post-install configuration"
msgstr "Paigaldusj�rgsed s�tted"

#: ../../install_steps_interactive.pm_.c:719
#, fuzzy, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Pane flopi seadmesse %s"

#: ../../install_steps_interactive.pm_.c:725
#, fuzzy, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Pange palun t�hi flopi seadmesse %s"

#: ../../install_steps_interactive.pm_.c:750
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"N��d on Teil v�imalik oma s�steemi laadida kr�ptotarkvara.\n"
"\n"
"HOIATUS:\n"
"\n"
"L�htuvalt erinevatest sellisele tarkvarale kohaldavatest n�uetest ja \n"
"m�jutatuna eri jurisdiktsioonide normidest peavad kliendid ja/v�i \n"
"l�ppkasutajad olema kindlad, et nende asukohamaa jurisdiktsiooni "
"�iguslikud \n"
"aktid lubavad neil alla laadida, s�ilitada ja/v�i kasutada \n"
"kr�ptograafiliste algoritmide realisatsioone sisaldavat tarkvara.\n"
"\n"
"Lisaks sellele peavad kliendid ja/v�i l�ppkasutajad j�lgima asukohamaa \n"
"juriidiliste normide t�itmist. Kui klient ja/v�i l�ppkasutaja rikub "
"kehtivaid \n"
"�igusnorme, kohaldatakse karistus vastavalt asukohamaa seadustele.\n"
"\n"
"Mitte mingil juhul ei kanna Mandrakesoft S.A. ega tarkvara tarnija \n"
"vastutust ei otseselt ega kaudselt tekkinud kahjude eest (kaasa arvatud, \n"
"kuid mitte ainult, saamataj��nud tulu, �ritegevuse katkestamine, �riinfo \n"
"kaotsimine ja muud rahalised kaotused ning v�imalikud kohtu poolt v�lja \n"
"m�istetud h�vitused), mis tulenevad tarkvara, mis on kasutatav p�rast \n"
"k�esoleva lepingu tingimustega n�ustumist, alla laadimisest, hoidmisest \n"
"v�i kasutamisest.\n"
"\n"
"K�igi lepinguga seotud k�simuste asjus p��rduge palun aadressil: \n"
"Mandrakesoft, Inc. \n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:782
msgid "Choose a mirror from which to get the packages"
msgstr "Valige peegel, millelt lugeda pakettide nimekiri"

#: ../../install_steps_interactive.pm_.c:793
msgid "Contacting the mirror to get the list of available packages"
msgstr "Proovin lugeda peeglilt pakettide nimekirja"

#: ../../install_steps_interactive.pm_.c:796
msgid "Please choose the packages you want to install."
msgstr "Palun valige paketid installimiseks"

#: ../../install_steps_interactive.pm_.c:808
msgid "Which is your timezone?"
msgstr "Millises ajav��tmes asute?"

#: ../../install_steps_interactive.pm_.c:813
#, fuzzy
msgid "Hardware clock set to GMT"
msgstr "Kas Teie arvuti sisekell on seatud GMT ajale?"

#: ../../install_steps_interactive.pm_.c:814
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:821
#, fuzzy
msgid "NTP Server"
msgstr "NIS server:"

#: ../../install_steps_interactive.pm_.c:855
#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
msgid "Remote CUPS server"
msgstr "CUPS printserver"

#: ../../install_steps_interactive.pm_.c:856
msgid "No printer"
msgstr "Printerit ei ole"

#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Kokkuv�te"

#: ../../install_steps_interactive.pm_.c:870
msgid "Mouse"
msgstr "Hiir"

#: ../../install_steps_interactive.pm_.c:872
msgid "Timezone"
msgstr "Ajav��de"

#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
#: ../../printerdrake.pm_.c:1844
msgid "Printer"
msgstr "Printer"

#: ../../install_steps_interactive.pm_.c:875
msgid "ISDN card"
msgstr "ISDN kaart"

#: ../../install_steps_interactive.pm_.c:878
msgid "Sound card"
msgstr "Helikaart"

#: ../../install_steps_interactive.pm_.c:881
msgid "TV card"
msgstr "TV kaart"

#: ../../install_steps_interactive.pm_.c:917
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:945
msgid "LDAP"
msgstr ""

#: ../../install_steps_interactive.pm_.c:918
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:954
#, fuzzy
msgid "NIS"
msgstr "Kasuta NIS-i"

#: ../../install_steps_interactive.pm_.c:919
#: ../../install_steps_interactive.pm_.c:941
#, fuzzy
msgid "Local files"
msgstr "Kohalik printer"

#: ../../install_steps_interactive.pm_.c:928
#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Juurkasutaja salas�na"

#: ../../install_steps_interactive.pm_.c:930
msgid "No password"
msgstr "Salas�na puudub"

#: ../../install_steps_interactive.pm_.c:935
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "Salas�na on liiga lihtne (peaks olema v�hemalt %d t�hem�rki)"

#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
#: ../../standalone/draknet_.c:604
msgid "Authentication"
msgstr "Autentimisviis"

#: ../../install_steps_interactive.pm_.c:949
#, fuzzy
msgid "Authentication LDAP"
msgstr "Autentimisviis"

#: ../../install_steps_interactive.pm_.c:950
msgid "LDAP Base dn"
msgstr ""

#: ../../install_steps_interactive.pm_.c:951
#, fuzzy
msgid "LDAP Server"
msgstr "NIS server:"

#: ../../install_steps_interactive.pm_.c:957
#, fuzzy
msgid "Authentication NIS"
msgstr "NIS autentimine"

#: ../../install_steps_interactive.pm_.c:958
msgid "NIS Domain"
msgstr "NIS domeen"

#: ../../install_steps_interactive.pm_.c:959
msgid "NIS Server"
msgstr "NIS server:"

#: ../../install_steps_interactive.pm_.c:994
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Isetehtud alglaadimisketas annab Teile v�imaluse laadida Linux flopilt\n"
"s�ltumata tavaliselt alglaadijast. See v�ib abiks olla, kui Te ei soovi\n"
"SILO-t k�vakettale kirjutada v�i m�ni muu operatsioonis�steem SILO\n"
"�ra kustutab v�i ei �nnestu SILO-t Teie riistvara peal kasutada.\n"
"Alglaadmisflopi on kasutatav ka h�daabikettana, kui k�vakettal oleva\n"
"failis�steemiga peaks mingi �nnetus juhtuma. Hoidke end ja Teid hoiab\n"
"ka Jumal!\n"
"\n"
"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
"\"Ok\"."

#: ../../install_steps_interactive.pm_.c:1010
msgid "First floppy drive"
msgstr "Esimene flopiseade"

#: ../../install_steps_interactive.pm_.c:1011
msgid "Second floppy drive"
msgstr "Teine flopiseade"

#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
msgid "Skip"
msgstr "J�ta vahele"

#: ../../install_steps_interactive.pm_.c:1017
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"Isetehtud alglaadimisketas annab Teile v�imaluse laadida Linux flopilt\n"
"s�ltumata tavaliselt alglaadijast. See v�ib abiks olla, kui Te ei soovi\n"
"LILO-t (grubi) k�vakettale kirjutada v�i m�ni muu operatsioonis�steem LILO\n"
"�ra kustutab v�i ei �nnestu LILO-t Teie riistvara peal kasutada.\n"
"Alglaadmisflopi on kasutatav ka h�daabikettana, kui k�vakettal oleva\n"
"failis�steemiga peaks mingi �nnetus juhtuma. Hoidke end ja Teid hoiab\n"
"ka Jumal!"

#: ../../install_steps_interactive.pm_.c:1026
msgid "Sorry, no floppy drive available"
msgstr "Flopiseade ei ole k�ttesaadav"

#: ../../install_steps_interactive.pm_.c:1030
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Vali flopiseade, mida kasutad alglaadimisketta tegemiseks"

#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Pane flopi seadmesse %s"

#: ../../install_steps_interactive.pm_.c:1037
msgid "Creating bootdisk"
msgstr "Loome alglaadimisketta"

#: ../../install_steps_interactive.pm_.c:1044
msgid "Preparing bootloader"
msgstr "Alglaaduri s�tted"

#: ../../install_steps_interactive.pm_.c:1055
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1060
msgid "Do you want to use aboot?"
msgstr "Soovite aboot-i kasutada?"

#: ../../install_steps_interactive.pm_.c:1063
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Viga aboot-i installimisel, \n"
"kas forseerida, riskides esimese partitsiooni h�vinguga?"

#: ../../install_steps_interactive.pm_.c:1070
#, fuzzy
msgid "Installing bootloader"
msgstr "Alglaaduri s�tted"

#: ../../install_steps_interactive.pm_.c:1076
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Alglaaduri installimine eba�nnestus. Tekkis j�rgnev viga:"

#: ../../install_steps_interactive.pm_.c:1084
#, fuzzy, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"You will need to change your Open Firmware boot-device to\n"
" enable the bootloader.  Hold down Command-Option-O-F\n"
" at reboot and enter:\n"
" setenv boot-device $of_boot,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."

#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
msgid "Low"
msgstr "Madal"

#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
msgid "Medium"
msgstr "Keskmine"

#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
msgid "High"
msgstr "K�rge"

#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
msgid "Choose security level"
msgstr "Valige turvatase"

#: ../../install_steps_interactive.pm_.c:1134
#: ../../standalone/drakautoinst_.c:80
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Pange palun t�hi flopi seadmesse %s"

#: ../../install_steps_interactive.pm_.c:1138
#: ../../standalone/drakautoinst_.c:82
msgid "Creating auto install floppy"
msgstr "Loon kiirpaigaldusflopi"

#: ../../install_steps_interactive.pm_.c:1149
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"M�ned sammud ei ole l�pule viidud\n"
"\n"
"Olete kindel, et v�ljute programmist?"

#: ../../install_steps_interactive.pm_.c:1160
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from http://www.mandrakelinux.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"�nnitlen, installimine on edukalt l�petatud.\n"
"V�tke palun v�lja flopi ja/v�i CD ja vajutage Enter alglaadimiseks.\n"
"\n"
"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
"Mandrake Linux kodulehek�ljelt http://www.mandrakelinux.com/.\n"
"\n"
"Abi s�steemi edasiseks konfigureerimiseks saab eelk�ige dokumendist\n"
"\"Official Mandrake Linux User's Guide\""

#: ../../install_steps_interactive.pm_.c:1172
msgid "Generate auto install floppy"
msgstr "Loo kiirpaigaldusflopi"

#: ../../install_steps_interactive.pm_.c:1174
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Automaatne install v�ib olla ka sedav�rd tegija,\n"
"et kasutab �ra kogu k�vaketta !!\n"
"\n"
"V�ite valida ka lihtsalt installi kordamise.\n"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Automated"
msgstr "Automaatne"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Replay"
msgstr "Korda"

#: ../../install_steps_interactive.pm_.c:1182
msgid "Save packages selection"
msgstr "Salvest paketivalik"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux installimine %s"

#: ../../install_steps_newt.pm_.c:34
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr " <Tab>/<Alt-Tab> v�ljade vahel  | <Space> valib | <F12> j�rgmine samm "

#: ../../interactive.pm_.c:73
msgid "kdesu missing"
msgstr "kdesu puudub"

#: ../../interactive.pm_.c:132
#, fuzzy
msgid "Choose a file"
msgstr "Valige tegevus"

#: ../../interactive.pm_.c:284
msgid "Advanced"
msgstr "Edasij�udnud"

#: ../../interactive.pm_.c:345
msgid "Please wait"
msgstr "Palun oodake"

#: ../../interactive_gtk.pm_.c:681
msgid "Expand Tree"
msgstr "Ava puu"

#: ../../interactive_gtk.pm_.c:682
msgid "Collapse Tree"
msgstr "Sule puu"

#: ../../interactive_gtk.pm_.c:683
msgid "Toggle between flat and group sorted"
msgstr "Sorteeritud v�i sorteerimata"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Mitmeselt m�istetav (%s), palun t�psustage\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "Halb valik, proovige palun uuesti\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (vaikimisi %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "Teie valik? (vaikimisi %s)"

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Teie valik? (vaikimisi %s, `none' - ei midagi)"

#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
msgid "Czech (QWERTZ)"
msgstr "T�ehhi (QWERTZ)"

#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
msgid "German"
msgstr "Saksa"

#: ../../keyboard.pm_.c:142
msgid "Dvorak"
msgstr "DVORAK"

#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
msgid "Spanish"
msgstr "Hispaania"

#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
msgid "Finnish"
msgstr "Soome"

#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
msgid "French"
msgstr "Prantsuse"

#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
msgid "Norwegian"
msgstr "Norra"

#: ../../keyboard.pm_.c:147
msgid "Polish"
msgstr "Poola"

#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
msgid "Russian"
msgstr "Vene"

#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
msgid "Swedish"
msgstr "Rootsi"

#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
msgid "UK keyboard"
msgstr "Briti"

#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
msgid "US keyboard"
msgstr "US"

#: ../../keyboard.pm_.c:159
#, fuzzy
msgid "Albanian"
msgstr "Iraani"

#: ../../keyboard.pm_.c:160
msgid "Armenian (old)"
msgstr "Armeenia (vanem)"

#: ../../keyboard.pm_.c:161
msgid "Armenian (typewriter)"
msgstr "Armeenia (tr�kimasin)"

#: ../../keyboard.pm_.c:162
msgid "Armenian (phonetic)"
msgstr "Armeenia (foneetiline)"

#: ../../keyboard.pm_.c:167
msgid "Azerbaidjani (latin)"
msgstr "Aserbaid�aani (ladina)"

#: ../../keyboard.pm_.c:169
msgid "Belgian"
msgstr "Belgia"

#: ../../keyboard.pm_.c:170
msgid "Bulgarian"
msgstr "Bulgaaria"

#: ../../keyboard.pm_.c:171
msgid "Brazilian (ABNT-2)"
msgstr "Brasiilia (ABNT-2)"

#: ../../keyboard.pm_.c:172
msgid "Belarusian"
msgstr "Valgevene"

#: ../../keyboard.pm_.c:173
msgid "Swiss (German layout)"
msgstr "�veitsi (Saksa asetus)"

#: ../../keyboard.pm_.c:174
msgid "Swiss (French layout)"
msgstr "�veitsi (Prantsuse asetus)"

#: ../../keyboard.pm_.c:179
msgid "Czech (QWERTY)"
msgstr "T�ehhi (QWERTY)"

#: ../../keyboard.pm_.c:181
msgid "German (no dead keys)"
msgstr "Saksa (ilma sammuta)"

#: ../../keyboard.pm_.c:182
msgid "Danish"
msgstr "Taani"

#: ../../keyboard.pm_.c:183
msgid "Dvorak (US)"
msgstr "DVORAK (US)"

#: ../../keyboard.pm_.c:184
msgid "Dvorak (Norwegian)"
msgstr "DVORAK (Norra)"

#: ../../keyboard.pm_.c:185
msgid "Estonian"
msgstr "Eesti"

#: ../../keyboard.pm_.c:189
msgid "Georgian (\"Russian\" layout)"
msgstr "Gruusia (vene)"

#: ../../keyboard.pm_.c:190
msgid "Georgian (\"Latin\" layout)"
msgstr "Gruusia (ladina)"

#: ../../keyboard.pm_.c:191
msgid "Greek"
msgstr "Kreeka"

#: ../../keyboard.pm_.c:192
msgid "Hungarian"
msgstr "Ungari"

#: ../../keyboard.pm_.c:193
msgid "Croatian"
msgstr "Kroaadi"

#: ../../keyboard.pm_.c:194
msgid "Israeli"
msgstr "Iisraeli"

#: ../../keyboard.pm_.c:195
msgid "Israeli (Phonetic)"
msgstr "Iisraeli foneetiline"

#: ../../keyboard.pm_.c:196
msgid "Iranian"
msgstr "Iraani"

#: ../../keyboard.pm_.c:197
msgid "Icelandic"
msgstr "Islandi"

#: ../../keyboard.pm_.c:198
msgid "Italian"
msgstr "Itaalia"

#: ../../keyboard.pm_.c:200
msgid "Japanese 106 keys"
msgstr "Jaapani 106 klahviga"

#: ../../keyboard.pm_.c:201
msgid "Korean keyboard"
msgstr "Korea"

#: ../../keyboard.pm_.c:202
msgid "Latin American"
msgstr "Ladina-Ameerika"

#: ../../keyboard.pm_.c:203
msgid "Lithuanian AZERTY (old)"
msgstr "Leedu AZERTY (vanem)"

#: ../../keyboard.pm_.c:205
msgid "Lithuanian AZERTY (new)"
msgstr "Leedu AZERTY (uuem)"

#: ../../keyboard.pm_.c:206
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Leedu numbrireaga QWERTY"

#: ../../keyboard.pm_.c:207
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Leedu foneetiline QWERTY"

#: ../../keyboard.pm_.c:208
#, fuzzy
msgid "Latvian"
msgstr "Asukoht"

#: ../../keyboard.pm_.c:209
msgid "Macedonian"
msgstr "Makedoonia"

#: ../../keyboard.pm_.c:210
msgid "Dutch"
msgstr "Hollandi"

#: ../../keyboard.pm_.c:212
msgid "Polish (qwerty layout)"
msgstr "Poola (QWERTY)"

#: ../../keyboard.pm_.c:213
msgid "Polish (qwertz layout)"
msgstr "Poola (QWERTZ)"

#: ../../keyboard.pm_.c:214
msgid "Portuguese"
msgstr "Portugali"

#: ../../keyboard.pm_.c:215
msgid "Canadian (Quebec)"
msgstr "Kanada (Quebec)"

#: ../../keyboard.pm_.c:217
#, fuzzy
msgid "Romanian (qwertz)"
msgstr "Vene (Yawerty)"

#: ../../keyboard.pm_.c:218
#, fuzzy
msgid "Romanian (qwerty)"
msgstr "Vene (Yawerty)"

#: ../../keyboard.pm_.c:220
msgid "Russian (Yawerty)"
msgstr "Vene (Yawerty)"

#: ../../keyboard.pm_.c:222
msgid "Slovenian"
msgstr "Sloveenia"

#: ../../keyboard.pm_.c:226
msgid "Slovakian (QWERTZ)"
msgstr "Slovaki (QWERTZ)"

#: ../../keyboard.pm_.c:227
msgid "Slovakian (QWERTY)"
msgstr "Slovaki (QWERTY)"

#: ../../keyboard.pm_.c:229
#, fuzzy
msgid "Serbian (cyrillic)"
msgstr "Aserbaid�aani (kirillitsa)"

#: ../../keyboard.pm_.c:230
msgid "Thai keyboard"
msgstr "Tai"

#: ../../keyboard.pm_.c:232
#, fuzzy
msgid "Tajik keyboard"
msgstr "Tai"

#: ../../keyboard.pm_.c:233
msgid "Turkish (traditional \"F\" model)"
msgstr "T�rgi (\"F\" mudel)"

#: ../../keyboard.pm_.c:234
msgid "Turkish (modern \"Q\" model)"
msgstr "T�rgi (\"Q\" mudel)"

#: ../../keyboard.pm_.c:235
msgid "Ukrainian"
msgstr "Ukraina"

#: ../../keyboard.pm_.c:238
msgid "US keyboard (international)"
msgstr "US (rahvusvaheline)"

#: ../../keyboard.pm_.c:239
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnami numbrireaga QWERTY"

#: ../../keyboard.pm_.c:240
#, fuzzy
msgid "Yugoslavian (latin)"
msgstr "Jugoslaavia (koos kirillitsaga)"

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Ring�hendus %s\n"

#: ../../lvm.pm_.c:83
msgid "Remove the logical volumes first\n"
msgstr "Eemalda enne kettar�hmad (logical volumes)\n"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Suni hiir"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Tavahiir"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Lihtsalt PS2 rattaga hiir"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
msgid "1 button"
msgstr "1 nupp"

#: ../../mouse.pm_.c:44
msgid "Generic"
msgstr "Tavaline"

#: ../../mouse.pm_.c:45
msgid "Wheel"
msgstr "Ratas"

#: ../../mouse.pm_.c:48
msgid "serial"
msgstr "seerial"

#: ../../mouse.pm_.c:50
msgid "Generic 2 Button Mouse"
msgstr "Lihtsalt 2-nupuline hiir"

#: ../../mouse.pm_.c:51
msgid "Generic 3 Button Mouse"
msgstr "Lihtsalt 3-nupuline hiir"

#: ../../mouse.pm_.c:52
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:53
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:54
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:56
msgid "Logitech CC Series"
msgstr "Logitech CC seeria (seerial)"

#: ../../mouse.pm_.c:57
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:59
msgid "MM Series"
msgstr "MM Series"

#: ../../mouse.pm_.c:60
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:61
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech (seerial, vana C7 t��pi)"

#: ../../mouse.pm_.c:65
msgid "busmouse"
msgstr "siinihiir"

#: ../../mouse.pm_.c:68
msgid "2 buttons"
msgstr "2 nuppu"

#: ../../mouse.pm_.c:69
msgid "3 buttons"
msgstr "3 nuppu"

#: ../../mouse.pm_.c:72
msgid "none"
msgstr "ei soovi"

#: ../../mouse.pm_.c:74
msgid "No mouse"
msgstr "Hiirt ei ole"

#: ../../mouse.pm_.c:482
msgid "Please test the mouse"
msgstr "Palun testige hiirt"

#: ../../mouse.pm_.c:483
msgid "To activate the mouse,"
msgstr "Hiire aktiveerimiseks"

#: ../../mouse.pm_.c:484
msgid "MOVE YOUR WHEEL!"
msgstr "KEERUTAGE RATTAKEST!"

#: ../../my_gtk.pm_.c:380
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""

#: ../../my_gtk.pm_.c:415
msgid "Finish"
msgstr "L�peta"

#: ../../my_gtk.pm_.c:415
msgid "Next ->"
msgstr "J�rgmine ->"

#: ../../my_gtk.pm_.c:416
msgid "<- Previous"
msgstr "<- Eelmine"

#: ../../my_gtk.pm_.c:716
msgid "Is this correct?"
msgstr "Kas see on sobiv?"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Loo interneti�hendus"

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"K�ige tavalisem �hendusviis ADSL jaoks on pppoe.\n"
"M�nel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
"Kui Te ei tea, kasutage pppoe-d"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr ""

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "dhcp"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "pptp"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr ""
"Mis DHCP klienti soovite kasutada?\n"
"Vaikimisi on dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"�htki v�rgukaarti ei �nnestunud tuvastada\n"
"Seega ei saa ka sellist �hendust seadistada."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
msgid "Choose the network interface"
msgstr "Valige v�rguliides"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"Palun valige, millist v�rguliidest soovite interneti�henduse jaoks kasutada"

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "v�rgukaarti ei leitud"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
msgid "Configuring network"
msgstr "V�rguseadistused"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Palun sisestage oma masina nimi.\n"
"Seda n�uavad ka m�ned DHCP serverid.\n"
"Masina nimi peab olema esitatud t�iskujul,\n"
"nagu ``minumasin.minufirma.ee''."

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
msgid "Host name"
msgstr "Masinanimi"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
#: ../../network/netconnect.pm_.c:221
msgid "Network Configuration Wizard"
msgstr "V�rgu s�tete abimees"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "V�line ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Sisemine ISDN kaart"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Millist ISDN �hendust kasutate?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerfull\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""

#
#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "New configuration (isdn-light)"
msgstr "Leitud tulem��ri s�tted!"

#
#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "Old configuration (isdn4net)"
msgstr "Leitud tulem��ri s�tted!"

#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
#: ../../network/isdn.pm_.c:214
msgid "ISDN Configuration"
msgstr "ISDN s�tted"

#: ../../network/isdn.pm_.c:169
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"Vali oma teenusepakkuja.\n"
" Kui see ei ole nimekirjas, vali Tundmatu"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol"
msgstr "Laadimisprotokoll"

#: ../../network/isdn.pm_.c:182
#, fuzzy
msgid "Europe protocol (EDSS1)"
msgstr "Euroopa (EDSS1)"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid "Protocol for the rest of the world"
msgstr "�lej��nud maailm"

#: ../../network/isdn.pm_.c:184
#, fuzzy
msgid ""
"Protocol for the rest of the world \n"
" no D-Channel (leased lines)"
msgstr ""
"�lej��nud maailm \n"
" ilma D-kanalita"

#: ../../network/isdn.pm_.c:188
msgid "Which protocol do you want to use ?"
msgstr "Mis protokolli soovite kasutada?"

#: ../../network/isdn.pm_.c:198
msgid "What kind of card do you have?"
msgstr "Mis t��pi kaart Teil on?"

#: ../../network/isdn.pm_.c:199
msgid "I don't know"
msgstr "Ei tea"

#: ../../network/isdn.pm_.c:199
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:199
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:205
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"Kui Teil on ISA kaart, siis peaks j�rgmised v��rtused olema �iged.\n"
"\n"
"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
"v��rtusi.\n"

#: ../../network/isdn.pm_.c:209
msgid "Abort"
msgstr "Katkesta"

#: ../../network/isdn.pm_.c:209
msgid "Continue"
msgstr "J�tka"

#: ../../network/isdn.pm_.c:215
msgid "Which is your ISDN card ?"
msgstr "Milline on Teie ISDN kaart?"

#: ../../network/isdn.pm_.c:234
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""
"Leidsin k�ll PCI ISDN kaardi, kui selle t��p on tundmatu. Palun valige �ks "
"PCI kaart j�rgmisel sammul."

#: ../../network/isdn.pm_.c:243
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "PCI ISDN kaarti ei leitud. Palun valige �ks j�rgmisel sammul."

#: ../../network/modem.pm_.c:37
msgid "Please choose which serial port your modem is connected to."
msgstr "Millisesse seerialporti on Teie modem �hendatud?"

#: ../../network/modem.pm_.c:42
msgid "Dialup options"
msgstr "DialUp parameetrid"

#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
msgid "Connection name"
msgstr "�henduse nimi"

#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
msgid "Phone number"
msgstr "Sissehelistamiskeskuse number"

#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
msgid "Login ID"
msgstr "Kasutajakonto"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Script-based"
msgstr "Skriptip�hine"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Terminal-based"
msgstr "Terminalip�hine"

#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
msgid "Domain name"
msgstr "Domeeninimi"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
msgid "First DNS Server (optional)"
msgstr "Esimene nimeserver (soovituslik)"

#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
msgid "Second DNS Server (optional)"
msgstr "Teine nimeserver (soovituslik)"

#: ../../network/netconnect.pm_.c:33
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Saate �henduse katkestada v�i uuesti seadistada."

#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Saate seadistada �henduse uuesti."

#: ../../network/netconnect.pm_.c:33
msgid "You are currently connected to internet."
msgstr "Hetkel olete Internetiga �hendatud."

#: ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"Saate �henduda Internetti v�i seadistada �hendus uuesti."

#: ../../network/netconnect.pm_.c:36
msgid "You are not currently connected to Internet."
msgstr "Hetkel ei ole Te Internetti �hendatud."

#: ../../network/netconnect.pm_.c:40
msgid "Connect to Internet"
msgstr "Loo interneti�hendus"

#: ../../network/netconnect.pm_.c:42
msgid "Disconnect from Internet"
msgstr "Katkesta interneti�hendus"

#: ../../network/netconnect.pm_.c:44
msgid "Configure network connection (LAN or Internet)"
msgstr "Seadista v�rgu�hendus (kohtv�rk v�i Internet)"

#: ../../network/netconnect.pm_.c:47
msgid "Internet connection & configuration"
msgstr "Interneti�henduse seadistamine"

#: ../../network/netconnect.pm_.c:96
#, fuzzy, c-format
msgid "We are now going to configure the %s connection."
msgstr ""
"\n"
"Saate �henduse katkestada v�i uuesti seadistada."

#: ../../network/netconnect.pm_.c:105
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"Saate �henduse katkestada v�i uuesti seadistada."

#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
msgid "Network Configuration"
msgstr "V�rgu s�tted"

#: ../../network/netconnect.pm_.c:130
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"V�rgu�hendus on juba seadistatud, sest installitakse ju v�rgust.\n"
"Kui soovite neid seadistusi s�ilitada, valige OK, muidu katkestage ja saate "
"seadistada uuesti.\n"

#: ../../network/netconnect.pm_.c:155
msgid ""
"Welcome to The Network Configuration Wizard\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Interneti�henduse Abimees\n"
"\n"
"N��d hakkame interneti�hendust seadistama.\n"
"Kui Te ei soovi automaatset tuvastamist siis j�tke see m�rkimata.\n"

#: ../../network/netconnect.pm_.c:157
msgid "Choose the profile to configure"
msgstr "Valige profiil, mida seadistada"

#: ../../network/netconnect.pm_.c:158
msgid "Use auto detection"
msgstr "Kasuta automaattuvastust"

#: ../../network/netconnect.pm_.c:164
msgid "Detecting devices..."
msgstr "Otsin printerit..."

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
msgid "Normal modem connection"
msgstr "Tavaline modemi�hendus"

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
#, c-format
msgid "detected on port %s"
msgstr "leiti port %s"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
msgid "ISDN connection"
msgstr "ISDN �hendus"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
#, c-format
msgid "detected %s"
msgstr "tuvastati %s"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, fuzzy
msgid "ADSL connection"
msgstr "LAN �hendus"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, c-format
msgid "detected on interface %s"
msgstr "leiti liidesel %s"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "Cable connection"
msgstr "Kaabli�hendus"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
#, fuzzy
msgid "cable connection detected"
msgstr "Kaabli�hendus"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "LAN connection"
msgstr "LAN �hendus"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "ethernet card(s) detected"
msgstr "v�rgukaart(i) leiti �les"

#: ../../network/netconnect.pm_.c:190
#, fuzzy
msgid "Choose the connection you want to configure"
msgstr "Valige kasutatav vahend"

#: ../../network/netconnect.pm_.c:214
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: ../../network/netconnect.pm_.c:215
#, fuzzy
msgid "Internet connection"
msgstr "Interneti�henduse jagamine"

#: ../../network/netconnect.pm_.c:221
msgid "Do you want to start the connection at boot?"
msgstr "Kas soovite luua �henduse juba alglaadimisel?"

#: ../../network/netconnect.pm_.c:239
msgid "Network configuration"
msgstr "V�rgus�tted"

#: ../../network/netconnect.pm_.c:240
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:243
#, fuzzy, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr "Kas soovite v�rgu�hendust taask�ivitada?"

#: ../../network/netconnect.pm_.c:247
msgid ""
"Congratulations, the network and internet configuration is finished.\n"
"\n"
"The configuration will now be applied to your system.\n"
msgstr ""
"�nnitleme, v�rgundus ja interneti�hendus on seadistatud.\n"
"\n"
"S�tted salvestatakse n��d.\n"

#: ../../network/netconnect.pm_.c:250
msgid ""
"After that is done, we recommend you to restart your X\n"
"environnement to avoid hostname changing problem."
msgstr ""
"Soovitame taask�ivitada ka X keskkonna, et v�ltida v�imalikke\n"
"masinanime muutmisest tingitud probleeme."

#: ../../network/network.pm_.c:283
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
"Valige lihtsalt OK, et s�tteid mitte muuta."

#: ../../network/network.pm_.c:288
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Palun andke IP parameetrid selle masina jaoks.\n"
"K�ik read tuleb sisestada IP-aadressi kujul\n"
"(N�iteks 12.34.56.78)"

#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
#, c-format
msgid "Configuring network device %s"
msgstr "Seadistame v�rgukaardi %s"

#: ../../network/network.pm_.c:298
#, c-format
msgid " (driver %s)"
msgstr " (juhtprogramm %s)"

#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
#: ../../standalone/draknet_.c:461
msgid "IP address"
msgstr "IP-aadress"

#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
msgid "Netmask"
msgstr "V�rgu mask"

#: ../../network/network.pm_.c:302
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:302
msgid "Automatic IP"
msgstr "Automaatne IP"

#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-aadress peab olema formaadis 1.2.3.4"

#: ../../network/network.pm_.c:351
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Palun sisestage oma masina nimi.\n"
"Masina nimi peab olema esitatud t�iskujul,\n"
"nagu ``minumasin.minufirma.ee''.\n"
"Kui Teil on vaikimisi l��s, siis sisestage ka selle IP-aadress"

#: ../../network/network.pm_.c:356
msgid "DNS server"
msgstr "Nimeserver"

#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
msgid "Gateway"
msgstr "Vaikel��s"

#: ../../network/network.pm_.c:359
msgid "Gateway device"
msgstr "L��sipoolne seade"

#: ../../network/network.pm_.c:371
msgid "Proxies configuration"
msgstr "Vahendajate s�tted"

#: ../../network/network.pm_.c:372
msgid "HTTP proxy"
msgstr "HTTP vahendaja"

#: ../../network/network.pm_.c:373
msgid "FTP proxy"
msgstr "FTP vahendaja"

#: ../../network/network.pm_.c:374
msgid "Track network card id (usefull for laptops)"
msgstr ""

#: ../../network/network.pm_.c:377
msgid "Proxy should be http://..."
msgstr "Vahendaja peab olema kujul http://..."

#: ../../network/network.pm_.c:378
msgid "Proxy should be ftp://..."
msgstr "Vahendaja peab olema kujul ftp://..."

#: ../../network/tools.pm_.c:38
msgid "Internet configuration"
msgstr "Interneti s�tted"

#: ../../network/tools.pm_.c:39
msgid "Do you want to try to connect to the Internet now?"
msgstr "Kas soovite oma interneti�hendust proovida?"

#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
msgid "Testing your connection..."
msgstr "Testime Teie �hendust..."

#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
msgid "The system is now connected to Internet."
msgstr "S�steem on n��d Internetti �hendatud"

#: ../../network/tools.pm_.c:50
msgid "For Security reason, it will be disconnected now."
msgstr "Turvakaalutlusel katkestan n��d �henduse."

#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Paistab, et s�steem ei ole Internetti �hendatud.\n"
"Palun seadistage �hendus uuesti."

#: ../../network/tools.pm_.c:75
msgid "Connection Configuration"
msgstr "Interneti�henduse s�tted"

#: ../../network/tools.pm_.c:76
msgid "Please fill or check the field below"
msgstr "Palun t�ida allpool olev v�li"

#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
msgid "Card IRQ"
msgstr "Kaardi IRQ"

#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
msgid "Card mem (DMA)"
msgstr "Kaardi m�lu (DMA)"

#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
msgid "Card IO"
msgstr "Kaardi IO"

#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
msgid "Card IO_0"
msgstr "Kaardi IO_0"

#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
msgid "Card IO_1"
msgstr "Kaardi IO_1"

#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
msgid "Your personal phone number"
msgstr "Teie telefoninumber"

#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
msgid "Provider name (ex provider.net)"
msgstr "Teenusepakkuja tunnus (n�iteks minuisp.ee)"

#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
msgid "Provider phone number"
msgstr "Sissehelistamiskeskuse number"

#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
msgid "Provider dns 1 (optional)"
msgstr "DNS 1 (v�ib j�tta t�hjaks)"

#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
msgid "Provider dns 2 (optional)"
msgstr "DNS 2 (v�ib j�tta t�hjaks)"

#: ../../network/tools.pm_.c:88
#, fuzzy
msgid "Choose your country"
msgstr "Klaviatuuri valik"

#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
msgid "Dialing mode"
msgstr "Valimisviis"

#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
#, fuzzy
msgid "Connection speed"
msgstr "�henduse t��p: "

#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
#, fuzzy
msgid "Connection timeout (in sec)"
msgstr "�henduse t��p: "

#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
msgid "Account Login (user name)"
msgstr "Kasutajatunnus"

#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
msgid "Account Password"
msgstr "Salas�na"

#: ../../partition_table.pm_.c:622
msgid "Extended partition not supported on this platform"
msgstr "Sellel platformil ei saa laiendatud partitsiooni luua"

#: ../../partition_table.pm_.c:640
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Partitsioonitabelis on miskip�rast t�hi koht, aga see ei ole kasutatav.\n"
"Ainuke lahendus on nihutada primaarset partitsiooni, et auk satuks "
"laiendatud partitsioonide k�rvale"

#: ../../partition_table.pm_.c:744
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Taastamine failist %s eba�nnestus: %s"

#: ../../partition_table.pm_.c:746
msgid "Bad backup file"
msgstr "K�lbmatu tagavarakoopia"

#: ../../partition_table.pm_.c:768
#, c-format
msgid "Error writing to file %s"
msgstr "Viga faili %s kirjutamisel"

#: ../../partition_table_raw.pm_.c:154
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Teie k�vakettal juhtub imelikke asju. \n"
"Andmete pidevuse kontroll eba�nnestus. \n"
"See t�hendab, et kettale kirjutamisel tekivad jamad"

#: ../../pkgs.pm_.c:24
msgid "must have"
msgstr "vajalik"

#: ../../pkgs.pm_.c:25
msgid "important"
msgstr "t�htis"

#: ../../pkgs.pm_.c:26
msgid "very nice"
msgstr "v�ga kena"

#: ../../pkgs.pm_.c:27
msgid "nice"
msgstr "kena"

#: ../../pkgs.pm_.c:28
msgid "maybe"
msgstr "v�ib olla"

#: ../../printer.pm_.c:23
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: ../../printer.pm_.c:24
msgid "LPRng - LPR New Generation"
msgstr ""

#: ../../printer.pm_.c:25
msgid "LPD - Line Printer Daemon"
msgstr ""

#: ../../printer.pm_.c:26
msgid "PDQ - Print, Don't Queue"
msgstr ""

#: ../../printer.pm_.c:32
msgid "CUPS"
msgstr ""

#: ../../printer.pm_.c:33
msgid "LPRng"
msgstr ""

#: ../../printer.pm_.c:34
msgid "LPD"
msgstr ""

#: ../../printer.pm_.c:35
msgid "PDQ"
msgstr ""

#: ../../printer.pm_.c:40
msgid "Local printer"
msgstr "Kohalik printer"

#: ../../printer.pm_.c:41
msgid "Remote printer"
msgstr "V�rguprinter"

#: ../../printer.pm_.c:42
#, fuzzy
msgid "Printer on remote CUPS server"
msgstr "CUPS printserver"

#: ../../printer.pm_.c:43
#, fuzzy
msgid "Printer on remote lpd server"
msgstr "lpd printserver"

#: ../../printer.pm_.c:44
msgid "Network printer (socket)"
msgstr "V�rguprinter (socket)"

#: ../../printer.pm_.c:45
#, fuzzy
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/Windows 95/98/NT"

#: ../../printer.pm_.c:46
#, fuzzy
msgid "Printer on NetWare server"
msgstr "Printserver:"

#: ../../printer.pm_.c:47
#, fuzzy
msgid "Enter a printer device URI"
msgstr "Printeri seadme URI"

#: ../../printer.pm_.c:48
msgid "Pipe job into a command"
msgstr ""

#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
msgid "Unknown model"
msgstr ""

#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer.pm_.c:693
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(moodul %s)"

#: ../../printer.pm_.c:695
msgid "(on this machine)"
msgstr ""

#: ../../printerdrake.pm_.c:22
msgid "Select Printer Connection"
msgstr "Vali printeri �hendusviis"

#: ../../printerdrake.pm_.c:23
msgid "How is the printer connected?"
msgstr "Kuidas on see printer �hendatud?"

#: ../../printerdrake.pm_.c:25
#, fuzzy
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure\n"
"here; these printers will be automatically detected. Please\n"
"select \"Printer on remote CUPS server\" in this case."
msgstr ""
"Kui v�rgus on CUPS server, siis ei ole Teil vaja siin\n"
"printereid seadistada, need leitakse automaatselt.\n"
"Kui kahtlete, valige \"CUPS printserver\"."

#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
msgid "None"
msgstr "Ei soovi"

#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
#, fuzzy
msgid "Choose a default printer!"
msgstr "Valige uus vaikimisi kasutaja :"

#: ../../printerdrake.pm_.c:105
msgid ""
"With remote CUPS servers, you do not have to configure any \n"
"printer here; CUPS servers inform your machine automatically\n"
"about their printers. All printers known to your machine\n"
"currently are listed in the \"Default printer\" field. Choose\n"
"the default printer for your machine there and click the\n"
"\"Apply/Re-read printers\" button. Click the same button to\n"
"refresh the list (it can take up to 30 seconds after the start\n"
"of CUPS until all remote printers are visible).\n"
"When your CUPS server is in a different network, you have to \n"
"give the CUPS server IP address and optionally the port number\n"
"to get the printer information from the server, otherwise leave\n"
"these fields blank."
msgstr ""

#: ../../printerdrake.pm_.c:117
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your\n"
"network environment, so that you can access the printers on the\n"
"CUPS servers in your local network. If this does not work \n"
"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
"CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
#, fuzzy
msgid "Close"
msgstr "Hiir"

#: ../../printerdrake.pm_.c:125
#, fuzzy
msgid "Apply/Re-read printers"
msgstr "V�rguprinter"

#: ../../printerdrake.pm_.c:129
#, fuzzy
msgid "The IP address should look like 192.168.1.20"
msgstr "IP-aadress peab olema formaadis 1.2.3.4"

#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
#, fuzzy
msgid "The port number should be an integer!"
msgstr "Pordi number peab olema ikkagi number"

#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
#, fuzzy
msgid "Default printer"
msgstr "Kohalik printer"

#: ../../printerdrake.pm_.c:146
msgid "CUPS server IP"
msgstr "CUPS serveri IP"

#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:149
#, fuzzy
msgid "Automatic CUPS configuration"
msgstr "Alglaaduri stiil"

#: ../../printerdrake.pm_.c:217
#, fuzzy
msgid "Detecting devices ..."
msgstr "Otsin printerit..."

#: ../../printerdrake.pm_.c:217
msgid "Test ports"
msgstr "Proovin porte"

#: ../../printerdrake.pm_.c:238
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "Leiti printer, nimega \"%s\" "

#: ../../printerdrake.pm_.c:255
msgid "Local Printer Device"
msgstr "Otse �hendatud printer"

#: ../../printerdrake.pm_.c:256
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Mis porti on Teie printer �hendatud? \n"
"(paneme t�hele, et /dev/lp0 on sama mis LPT1:)?\n"

#: ../../printerdrake.pm_.c:258
msgid "Printer Device"
msgstr "Printeri seade"

#: ../../printerdrake.pm_.c:261
msgid "Device/file name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
#: ../../printerdrake.pm_.c:786
#, fuzzy
msgid "Reading printer database ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:312
msgid "Remote lpd Printer Options"
msgstr "V�rguprinteri s�tted"

#: ../../printerdrake.pm_.c:313
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply\n"
"the hostname of the printer server and the printer name\n"
"on that server."
msgstr ""
"Et kasutada teise masina lpd printerit, peate sisestama\n"
"printserveri nime ja prindij�rjekorra nime, mida soovite\n"
"serveril kasutada."

#: ../../printerdrake.pm_.c:316
#, fuzzy
msgid "Remote host name"
msgstr "Printserveri nimi:"

#: ../../printerdrake.pm_.c:317
#, fuzzy
msgid "Remote printer name"
msgstr "V�rguprinter"

#: ../../printerdrake.pm_.c:320
#, fuzzy
msgid "Remote host name missing!"
msgstr "Printserveri nimi:"

#: ../../printerdrake.pm_.c:324
#, fuzzy
msgid "Remote printer name missing!"
msgstr "Printserveri nimi:"

#: ../../printerdrake.pm_.c:392
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT) printeri s�tted"

#: ../../printerdrake.pm_.c:393
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"Et printida SMB printerile, peate andma vastava server SMB nimi\n"
"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja v�ibolla ka\n"
"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salas�na ja t��grupi"

#: ../../printerdrake.pm_.c:398
msgid "SMB server host"
msgstr "SMB serveri nimi"

#: ../../printerdrake.pm_.c:399
msgid "SMB server IP"
msgstr "SMB serveri IP"

#: ../../printerdrake.pm_.c:400
msgid "Share name"
msgstr "Jagatav printer"

#: ../../printerdrake.pm_.c:403
msgid "Workgroup"
msgstr "T��grupp"

#: ../../printerdrake.pm_.c:410
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: ../../printerdrake.pm_.c:414
msgid "Samba share name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:473
msgid "NetWare Printer Options"
msgstr "NetWare printeri s�tted"

#: ../../printerdrake.pm_.c:474
msgid ""
"To print on a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"Et kasutada NetWare printerit, peate sisestama NetWare printserveri\n"
"nime (NB! See v�ib olla erinev tema TCP/IP nimest!) samuti nagu ka\n"
"prindij�rjekorra nime serveril ning kasutajatunnuse ja salas�na"

#: ../../printerdrake.pm_.c:478
msgid "Printer Server"
msgstr "Printserver:"

#: ../../printerdrake.pm_.c:479
msgid "Print Queue Name"
msgstr "Prindij�rjekorra nimi:"

#: ../../printerdrake.pm_.c:484
msgid "NCP server name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:488
msgid "NCP queue name missing!"
msgstr ""

#: ../../printerdrake.pm_.c:527
msgid "Socket Printer Options"
msgstr "Pistikprinteri s�tted"

#: ../../printerdrake.pm_.c:528
#, fuzzy
msgid ""
"To print to a socket printer, you need to provide the\n"
"host name of the printer and optionally the port number.\n"
"On HP JetDirect servers the port number is usually 9100,\n"
"on other servers it can vary. See the manual of your\n"
"hardware."
msgstr ""
"Sisestage palun printeri masinanimi ja v�imaluse\n"
"korral pordi number"

#: ../../printerdrake.pm_.c:533
#, fuzzy
msgid "Printer host name"
msgstr "Printeri nimi"

#: ../../printerdrake.pm_.c:537
#, fuzzy
msgid "Printer host name missing!"
msgstr "Printeri nimi"

#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
msgid "Printer Device URI"
msgstr "Printeri seadme URI"

#: ../../printerdrake.pm_.c:567
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: ../../printerdrake.pm_.c:582
msgid "A valid URI must be entered!"
msgstr ""

#: ../../printerdrake.pm_.c:682
msgid ""
"Every printer needs a name (for example lp).\n"
"The Description and Location fields do not need \n"
"to be filled in. They are comments for the users."
msgstr ""

#: ../../printerdrake.pm_.c:685
msgid "Name of printer"
msgstr "Printeri nimi"

#: ../../printerdrake.pm_.c:686
msgid "Description"
msgstr "Kirjeldus"

#: ../../printerdrake.pm_.c:687
msgid "Location"
msgstr "Asukoht"

#: ../../printerdrake.pm_.c:701
#, fuzzy
msgid "Preparing printer database ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:793
#, fuzzy
msgid "Printer model selection"
msgstr "Printeri �hendusviis"

#: ../../printerdrake.pm_.c:794
#, fuzzy
msgid "Which printer model do you have?"
msgstr "Mis t��pi printer see on?"

#: ../../printerdrake.pm_.c:866
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "Interneti s�tted"

#: ../../printerdrake.pm_.c:867
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they\n"
"work only when connected to the first parallel port. When\n"
"your printer is connected to another port or to a print\n"
"server box please connect the printer to the first parallel\n"
"port before you print a test page. Otherwise the printer\n"
"will not work. Your connection type setting will be ignored\n"
"by the driver."
msgstr ""

#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "Interneti s�tted"

#: ../../printerdrake.pm_.c:917
msgid ""
"The inkjet printer drivers provided by Lexmark only support\n"
"local printers, no printers on remote machines or print server\n"
"boxes. Please connect your printer to a local port or\n"
"configure it on the machine where it is connected to."
msgstr ""

#: ../../printerdrake.pm_.c:947
msgid ""
"To be able to print with your Lexmark inkjet and this\n"
"configuration, you need the inkjet printer drivers\n"
"provided by Lexmark (http://www.lexmark.com/). Go to\n"
"the US site and click on the \"Drivers\" button. Then\n"
"choose your model and afterwards \"Linux\" as\n"
"operating system. The drivers come as RPM packages\n"
"or shell scripts with interactive graphical installation.\n"
"You do not need to do this configuration by the\n"
"graphical frontends. Cancel directly after the license\n"
"agreement. Then print printhead alignment pages with\n"
"\"lexmarkmaintain\" and adjust the head alignment\n"
"settings with this program."
msgstr ""

#: ../../printerdrake.pm_.c:1079
msgid ""
"Printer default settings\n"
"You should make sure that the page size and the\n"
"ink type (if available) are set correctly. Note\n"
"that with a very high printout quality printing\n"
"can get substantially slower."
msgstr ""

#: ../../printerdrake.pm_.c:1090
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: ../../printerdrake.pm_.c:1094
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: ../../printerdrake.pm_.c:1099
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: ../../printerdrake.pm_.c:1136
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "Kas soovite seadistusi proovida?"

#: ../../printerdrake.pm_.c:1152
#, fuzzy
msgid "Test pages"
msgstr "Proovin porte"

#: ../../printerdrake.pm_.c:1153
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed\n"
"and on laser printers with too low memory it can even not come out.\n"
"In most cases it is enough to print the standard test page."
msgstr ""

#: ../../printerdrake.pm_.c:1158
#, fuzzy
msgid "No test pages"
msgstr "Jah, tr�ki m�lemad testlehek�ljed"

#: ../../printerdrake.pm_.c:1159
#, fuzzy
msgid "Print"
msgstr "Printer"

#: ../../printerdrake.pm_.c:1161
#, fuzzy
msgid "Standard test page"
msgstr "Standardt��riistad"

#: ../../printerdrake.pm_.c:1164
msgid "Alternative test page (Letter)"
msgstr ""

#: ../../printerdrake.pm_.c:1167
#, fuzzy
msgid "Alternative test page (A4)"
msgstr "Tr�kitakse testlehek�lg(i)..."

#: ../../printerdrake.pm_.c:1169
#, fuzzy
msgid "Photo test page"
msgstr "Tr�kitakse testlehek�lg(i)..."

#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
msgid "Printing test page(s)..."
msgstr "Tr�kitakse testlehek�lg(i)..."

#: ../../printerdrake.pm_.c:1200
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Testlehek�lg on saadetus tr�kideemonile.\n"
"N��d v�ib minna natuke aega.\n"
"Staatus:\n"
"%s\n"
"\n"
"Kas tulemust on juba n�ha?"

#: ../../printerdrake.pm_.c:1204
#, fuzzy
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Testlehek�lg on saadetud tr�kideemonile.\n"
"N��d v�ib minna natuke aega.\n"
"Staatus:\n"
"%s\n"
"\n"
"Kas tulemust on juba n�ha?"

#: ../../printerdrake.pm_.c:1211
msgid "Did it work properly?"
msgstr ""

#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
#, fuzzy
msgid "Raw printer"
msgstr "Printerit ei ole"

#: ../../printerdrake.pm_.c:1237
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1239
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
#: ../../printerdrake.pm_.c:1266
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
msgid ""
"To get a list of the options available for the current printer read either "
"the list shown below or click on the \"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
#: ../../printerdrake.pm_.c:1275
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button.\n"
"\n"
msgstr ""

#: ../../printerdrake.pm_.c:1273
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1277
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1281
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printerdrake.pm_.c:1292
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Seiskame v�rguliidesed"

#: ../../printerdrake.pm_.c:1294
#, fuzzy
msgid "Print option list"
msgstr "Otse �hendatud printeri s�tted"

#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
#: ../../standalone/printerdrake_.c:48
#, fuzzy
msgid "Reading printer data ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
#: ../../printerdrake.pm_.c:1411
#, fuzzy
msgid "Transfer printer configuration"
msgstr "Interneti s�tted"

#: ../../printerdrake.pm_.c:1339
#, c-format
msgid ""
"You can copy the printer configuration which you have done \n"
"for the spooler %s to %s, your current spooler. All the\n"
"configuration data (printer name, description, location, \n"
"connection type, and default option settings) is overtaken,\n"
"but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following \n"
"reasons:\n"
msgstr ""

#: ../../printerdrake.pm_.c:1347
msgid ""
"CUPS does not support printers on Novell servers or printers\n"
"sending the data into a free-formed command.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1350
msgid ""
"PDQ only supports local printers, remote LPD printers, and\n"
"Socket/TCP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1353
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printerdrake.pm_.c:1355
msgid ""
"In addition, queues not created with this program or\n"
"\"foomatic-configure\" cannot be transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1357
msgid ""
"\n"
"Also printers configured with the PPD files provided by\n"
"their manufacturers or with native CUPS drivers can not be\n"
"transferred."
msgstr ""

#: ../../printerdrake.pm_.c:1360
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printerdrake.pm_.c:1363
msgid "Do not transfer printers"
msgstr ""

#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
msgid "Transfer"
msgstr ""

#: ../../printerdrake.pm_.c:1377
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printerdrake.pm_.c:1385
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Printeri nimi tohib sisaldada vaid t�hti, numbreid ja alakriipsu"

#: ../../printerdrake.pm_.c:1390
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printerdrake.pm_.c:1398
#, fuzzy
msgid "New printer name"
msgstr "Printerit ei ole"

#: ../../printerdrake.pm_.c:1401
#, c-format
msgid "Transferring %s ..."
msgstr ""

#: ../../printerdrake.pm_.c:1412
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"),\n"
"Should it be also the default printer under the\n"
"new printing system %s?"
msgstr ""

#: ../../printerdrake.pm_.c:1423
#, fuzzy
msgid "Refreshing printer data ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
#: ../../printerdrake.pm_.c:1515
#, fuzzy
msgid "Configuration of a remote printer"
msgstr "Sea printer"

#: ../../printerdrake.pm_.c:1432
#, fuzzy
msgid "Starting network ..."
msgstr "Testime Teie �hendust..."

#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
#: ../../printerdrake.pm_.c:1464
#, fuzzy
msgid "Configure the network now"
msgstr "V�rgus�tted"

#: ../../printerdrake.pm_.c:1455
#, fuzzy
msgid "Network functionality not configured"
msgstr "Monitor ei ole seadistatud"

#: ../../printerdrake.pm_.c:1456
msgid ""
"You are going to configure a remote printer. This needs working\n"
"network access, but your network is not configured yet. If you\n"
"go on without network configuration, you will not be able to use\n"
"the printer which you are configuring now. How do you want \n"
"to proceed?"
msgstr ""

#: ../../printerdrake.pm_.c:1463
#, fuzzy
msgid "Go on without configuring the network"
msgstr "V�rguseadistused"

#: ../../printerdrake.pm_.c:1496
msgid ""
"The network configuration done during the installation \n"
"cannot be started now. Please check whether the network\n"
"gets accessable after booting your system and correct the\n"
"configuration using the Mandrake Control Center, section\n"
"\"Network & Internet\"/\"Connection\", and afterwards set\n"
"up the printer, also using the Mandrake Control Center,\n"
"section \"Hardware\"/\"Printer\""
msgstr ""

#: ../../printerdrake.pm_.c:1503
msgid ""
"The network access was not running and could not be \n"
"started. Please check your configuration and your \n"
"hardware. Then try to configure your remote printer\n"
"again."
msgstr ""

#: ../../printerdrake.pm_.c:1516
#, fuzzy
msgid "Restarting printing system ..."
msgstr "Millist printimiss�steemi soovite kasutada?"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "high"
msgstr "K�rge"

#: ../../printerdrake.pm_.c:1548
#, fuzzy
msgid "paranoid"
msgstr "Paranoiline"

#: ../../printerdrake.pm_.c:1549
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printerdrake.pm_.c:1550
#, c-format
msgid ""
"You are about to install the printing system %s on\n"
"a system running in the %s security level.\n"
"\n"
"This printing system runs a daemon (background process)\n"
"which waits for print jobs and handles them. This daemon\n"
"is also accessable by remote machines through the network\n"
"and so it is a possible point for attacks. Therefore only\n"
"a few selected daemons are started by default in this\n"
"security level.\n"
"\n"
"Do you really want to configure printing on this\n"
"machine?"
msgstr ""

#: ../../printerdrake.pm_.c:1584
#, fuzzy
msgid "Starting the printing system at boot time"
msgstr "Millist printimiss�steemi soovite kasutada?"

#: ../../printerdrake.pm_.c:1585
#, c-format
msgid ""
"The printing system (%s) will not be started automatically\n"
"when the machine is booted.\n"
"\n"
"It is possible that the automatic starting was turned off \n"
"by changing to a higher security level, because the printing\n"
"system is a potential point for attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing\n"
"system turned on again?"
msgstr ""

#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
#: ../../printerdrake.pm_.c:1778
msgid "Checking installed software..."
msgstr ""

#: ../../printerdrake.pm_.c:1648
msgid "Removing LPRng..."
msgstr ""

#: ../../printerdrake.pm_.c:1675
msgid "Removing LPD..."
msgstr ""

#: ../../printerdrake.pm_.c:1727
#, fuzzy
msgid "Select Printer Spooler"
msgstr "Vali printeri �hendusviis"

#: ../../printerdrake.pm_.c:1728
#, fuzzy
msgid "Which printing system (spooler) do you want to use?"
msgstr "Millist printimiss�steemi soovite kasutada?"

#: ../../printerdrake.pm_.c:1759
#, fuzzy, c-format
msgid "Configuring printer \"%s\" ..."
msgstr "Printeri s�tted"

#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
msgid "Printer options"
msgstr "Otse �hendatud printeri s�tted"

#: ../../printerdrake.pm_.c:1815
#, fuzzy
msgid "Preparing PrinterDrake ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:1845
#, fuzzy
msgid "Would you like to configure printing?"
msgstr "Kas soovite printerit seadistada?"

#: ../../printerdrake.pm_.c:1857
msgid "Printing system: "
msgstr ""

#: ../../printerdrake.pm_.c:1879
msgid ""
"The following printers are configured.\n"
"Click on one of them to modify it or\n"
"to get information about it or on \n"
"\"Add Printer\" to add a new printer."
msgstr ""

#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
msgid "Normal Mode"
msgstr "Tavakasutus"

#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
msgid " (Default)"
msgstr " (Vaikimisi)"

#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
#, fuzzy
msgid "Printer(s) on remote CUPS server(s)"
msgstr "CUPS printserver"

#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
#, fuzzy
msgid "Printer(s) on remote server(s)"
msgstr "CUPS printserver"

#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
#, fuzzy
msgid "Add printer"
msgstr "Printerit ei ole"

#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
#: ../../printerdrake.pm_.c:2128
#, fuzzy
msgid "Do you want to configure another printer?"
msgstr "Kas soovite seadistusi proovida?"

#: ../../printerdrake.pm_.c:2003
#, fuzzy
msgid "Modify printer configuration"
msgstr "Interneti s�tted"

#: ../../printerdrake.pm_.c:2004
#, c-format
msgid ""
"Printer %s: %s %s\n"
"What do you want to modify on this printer?"
msgstr ""

#: ../../printerdrake.pm_.c:2012
msgid "Do it!"
msgstr ""

#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
#, fuzzy
msgid "Printer connection type"
msgstr "Interneti�henduse jagamine"

#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
#, fuzzy
msgid "Printer name, description, location"
msgstr "Printeri �hendusviis"

#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
msgid "Printer manufacturer, model, driver"
msgstr ""

#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
msgid "Printer manufacturer, model"
msgstr ""

#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
msgid "Set this printer as the default"
msgstr ""

#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
#, fuzzy
msgid "Print test pages"
msgstr "Tr�kitakse testlehek�lg(i)..."

#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
msgid "Know how to print with this printer"
msgstr ""

#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
#, fuzzy
msgid "Remove printer"
msgstr "V�rguprinter"

#: ../../printerdrake.pm_.c:2071
#, fuzzy, c-format
msgid "Removing old printer \"%s\" ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../printerdrake.pm_.c:2096
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: ../../printerdrake.pm_.c:2103
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Kas soovite v�rgu�hendust taask�ivitada?"

#: ../../printerdrake.pm_.c:2105
#, fuzzy, c-format
msgid "Removing printer \"%s\" ..."
msgstr "Loetakse CUPS juhtprogramme"

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
#, fuzzy
msgid "Proxy configuration"
msgstr "Vahendajate s�tted"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr ""

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
#, fuzzy
msgid "port"
msgstr "Port"

#: ../../proxy.pm_.c:44
#, fuzzy
msgid "Url should begin with 'http:'"
msgstr "Vahendaja peab olema kujul http://..."

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
#, fuzzy
msgid "The port part should be numeric"
msgstr "Pordi number peab olema ikkagi number"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""

#: ../../proxy.pm_.c:65
#, fuzzy
msgid "Url should begin with 'ftp:'"
msgstr "Vahendaja peab olema kujul ftp://..."

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""

#: ../../proxy.pm_.c:80
#, fuzzy
msgid "login"
msgstr "Vaikimisi sisenemine"

#: ../../proxy.pm_.c:82
#, fuzzy
msgid "password"
msgstr "Salas�na"

#: ../../proxy.pm_.c:84
#, fuzzy
msgid "re-type password"
msgstr "Salas�na puudub"

#: ../../proxy.pm_.c:88
#, fuzzy
msgid "The passwords don't match. Try again!"
msgstr "Salas�nad ei klapi"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"

#: ../../raid.pm_.c:111
#, c-format
msgid "Can't write file %s"
msgstr "Ei saa kirjutada faili %s"

#: ../../raid.pm_.c:136
msgid "mkraid failed"
msgstr "mkraid eba�nnestus"

#: ../../raid.pm_.c:136
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid eba�nnestus (puudub 'raidtools'?)"

#: ../../raid.pm_.c:152
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ei ole piisavalt partitsiooni RAID-%d jaoks\n"

#: ../../services.pm_.c:15
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: ../../services.pm_.c:16
msgid "Anacron a periodic command scheduler."
msgstr ""
"Anacron k�ivitab programme perioodiliselt analoogiliselt cron-ile.\n"
"Kasutage seda juhul kui Teie arvuti ei t��ta 24h."

#: ../../services.pm_.c:17
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd on kasutusel p�hiliselt s�learvutites, akude t�ituvuse j�lgimiseks.\n"
"Samuti suudab see aku t�hjenemisel s�steemi viisakalt maha v�tta."

#: ../../services.pm_.c:19
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Laseb k�ivitada �hekordseid k�ske etteantud ajal v�i ootab s�steemi\n"
"koormuse laskumist k�su k�ivitamiseks piisavale tasemele."

#: ../../services.pm_.c:21
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron on UNIXi s�steemide standardvahend kasutaja programmide perioodiliseks\n"
"k�ivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
"mugavust t�stvaid omadusi. Soovitav s�steemile mis t��tab 24h"

#: ../../services.pm_.c:24
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM annab v�imaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
"l�ikamisele/kleepimisele saab kasutada ka men��s�steeme."

#: ../../services.pm_.c:27
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: ../../services.pm_.c:29
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr ""
"Apache on maailma juhtiv veebiserveri programm. T�en�oliselt\n"
"ka v�imsaim."

#: ../../services.pm_.c:31
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Interneti \"superserver\", nimega inetd laseb k�ivitada mitmeid v�rgu-\n"
"teenustel, nagu telnet, ftp, rsh, rlogin jne."

#: ../../services.pm_.c:35
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: ../../services.pm_.c:37
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"See programm laeb s�steemi k�ivitumisel klaviatuuripaigutuse vastavalt\n"
"failis /etc/sysconfig/keyboard kirjeldatule."

#: ../../services.pm_.c:40
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: ../../services.pm_.c:42
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: ../../services.pm_.c:43
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: ../../services.pm_.c:45
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr "lpd on tr�kideemon, ilma selleta ei ole v�imalik printida."

#: ../../services.pm_.c:47
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: ../../services.pm_.c:49
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS\n"
"hierarhiat, t�lkimaks nimesid IP-aadressideks"

#: ../../services.pm_.c:51
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"�hendab ja lahutab k�iki v�rgufailis�steeme (nii NFS, SMB\n"
"kui ka NCP)"

#: ../../services.pm_.c:53
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr "Aktiveerib s�steemi laadimisel Teile vajalikud v�rguliidesed."

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm t�idab\n"
"NFS serveri funktsioone, ja konfigureeritakse failis /etc/exports."

#: ../../services.pm_.c:58
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm t�idab\n"
"NFS failide lukustamise funktsioone. Vajalik serveerimisel."

#: ../../services.pm_.c:60
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: ../../services.pm_.c:62
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: ../../services.pm_.c:63
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA tugi on tavaliselt vajalik s�learvutitele v�rgu- ja modemiliideste\n"
"lisamiseks."

#: ../../services.pm_.c:66
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper haldab RPC �hendusi, mida kasutavad NFS ja NIS. Neil \n"
"serveritel on see h�davajalik."

#: ../../services.pm_.c:69
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix on meili transpordiagent, see t�hendab programm, mis\n"
"toimetab meili �hest masinast teise."

#: ../../services.pm_.c:71
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Salvestab ja taastab juhuarvude genereerimiseks vajaliku s�steemse\n"
"entroopiasalve."

#: ../../services.pm_.c:73
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""

#: ../../services.pm_.c:75
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"routed on RIP deemon, mis vahetab selle protokolli alusel marsruutimis-\n"
"infot. Kui Teil on RIP kasutusel, on vajalik ka routed."

#: ../../services.pm_.c:78
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
"t�� kohta. Ettevaatust!"

#: ../../services.pm_.c:80
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
"kasutajate kohta. Ettevaatust!"

#: ../../services.pm_.c:82
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokoll laseb �le v�rgu saada informatsiooni s�steemi\n"
"kasutajate kohta. Ettevaatust!"

#: ../../services.pm_.c:84
#, fuzzy
msgid "Launch the sound system on your machine"
msgstr "K�ivita X-Windows alglaadimisel"

#: ../../services.pm_.c:85
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr "syslog-i kaudu toimub s�steemis toimiva logimine. Vajalik!"

#: ../../services.pm_.c:87
msgid "Load the drivers for your usb devices."
msgstr ""

#: ../../services.pm_.c:88
#, fuzzy
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Stardib X fondiserveri, selleta X ei k�ivitu."

#: ../../services.pm_.c:114 ../../services.pm_.c:156
msgid "Choose which services should be automatically started at boot time"
msgstr "Valige, millised teenused tuleks alglaadimisel k�ivitada"

#: ../../services.pm_.c:126
#, fuzzy
msgid "Printing"
msgstr "Printer"

#: ../../services.pm_.c:127
msgid "Internet"
msgstr "Internet"

#: ../../services.pm_.c:130
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:132
#, fuzzy
msgid "System"
msgstr "T��mood"

#: ../../services.pm_.c:137
#, fuzzy
msgid "Remote Administration"
msgstr "V�rguprinteri s�tted"

#: ../../services.pm_.c:145
#, fuzzy
msgid "Database Server"
msgstr "Server, Andmebaasid"

#: ../../services.pm_.c:174
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:186
#, fuzzy
msgid "Services"
msgstr "seade"

#: ../../services.pm_.c:198
msgid "running"
msgstr "k�imas"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "peatatud"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr "Teenused ja deemonid"

#: ../../services.pm_.c:217
msgid ""
"No additionnal information\n"
"about this service, sorry."
msgstr ""
"Selle teenuse kohta ei oska\n"
"lisainformatsiooni anda."

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "Alglaadimisel"

#: ../../standalone.pm_.c:25
#, fuzzy
msgid "Installing packages..."
msgstr "Paketi %s installimine"

#: ../../standalone/diskdrake_.c:63
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
"Proovin loetamatud kirjed puhastada"

#: ../../standalone/drakautoinst_.c:44
#, fuzzy
msgid "Error!"
msgstr "Viga"

#: ../../standalone/drakautoinst_.c:45
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: ../../standalone/drakautoinst_.c:47
#, fuzzy
msgid "Auto Install Configurator"
msgstr "Paigaldusj�rgsed s�tted"

#: ../../standalone/drakautoinst_.c:48
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst_.c:70
#, fuzzy
msgid "Automatic Steps Configuration"
msgstr "Alglaaduri stiil"

#: ../../standalone/drakautoinst_.c:71
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
msgid "Congratulations!"
msgstr "�nnitleme!"

#: ../../standalone/drakautoinst_.c:113
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
msgid "Internet Connection Sharing"
msgstr "Interneti�henduse jagamine"

#: ../../standalone/drakgw_.c:119
msgid "Internet Connection Sharing currently enabled"
msgstr "Interneti�henduse jagamine t��tab"

#: ../../standalone/drakgw_.c:120
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Interneti�henduse jagamine on juba seadistatud ja see on\n"
"ka praegu aktiivne.\n"
"\n"
"Mida Te soovite teha?"

#: ../../standalone/drakgw_.c:124
msgid "disable"
msgstr "keela"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "dismiss"
msgstr "t�hista"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "reconfigure"
msgstr "seadista uuesti"

#: ../../standalone/drakgw_.c:127
msgid "Disabling servers..."
msgstr "Peaten serverid..."

#: ../../standalone/drakgw_.c:135
msgid "Internet connection sharing is now disabled."
msgstr "Interneti�hendust n��d enam ei jagata"

#: ../../standalone/drakgw_.c:144
msgid "Internet Connection Sharing currently disabled"
msgstr "Interneti�hendust hetkel ei jagata"

#: ../../standalone/drakgw_.c:145
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Interneti�henduse jagamine on juba seadistatud aga hetkel\n"
"on see keelatud.\n"
"\n"
"Mida Te soovite teha?"

#: ../../standalone/drakgw_.c:149
msgid "enable"
msgstr "luba"

#: ../../standalone/drakgw_.c:156
msgid "Enabling servers..."
msgstr "K�ivitan serverid..."

#: ../../standalone/drakgw_.c:161
msgid "Internet connection sharing is now enabled."
msgstr "Interneti�henduse jagamine n��d t��tab"

#: ../../standalone/drakgw_.c:182
#, fuzzy
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"N��d on Teil v�imalik seadistada oma arvutit interneti�hendust jagama.\n"
"\n"
"M�rkus: kohtv�rgu (LAN) jaoks on vajalik eraldi v�rgukaardi olemasolu."

#: ../../standalone/drakgw_.c:208
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Liides %s (kasutab moodulit %s)"

#: ../../standalone/drakgw_.c:209
#, c-format
msgid "Interface %s"
msgstr "Liides %s"

#: ../../standalone/drakgw_.c:217
msgid "No network adapter on your system!"
msgstr "Teie s�steemis ei ole v�rgukaarti!"

#: ../../standalone/drakgw_.c:218
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"�htki v�rgukaarti ei ole hetkel seadistatud. Palun kasutage selleks "
"riistvara s�tteseadjat."

#: ../../standalone/drakgw_.c:224
msgid "Network interface"
msgstr "V�rguliides"

#: ../../standalone/drakgw_.c:225
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Teil on vaid �ks seadistatud v�rguliides:\n"
"\n"
"%s\n"
"\n"
"Kohtv�rgu s�tted seotakse selle liidesga."

#: ../../standalone/drakgw_.c:234
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Palun valige millist v�rguliidest soovite kasutada kohtv�rgu\n"
"jaoks."

#: ../../standalone/drakgw_.c:243
msgid ""
"Warning, the network adapter is already configured. I will reconfigure it."
msgstr ""
"Hoiatan, v�rguliides on juba seadistatud. J�rgnevalt seadistame selle uuesti."

#: ../../standalone/drakgw_.c:254
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "V�imalik kohtv�rgu aadressi konflikt %s konfiguratsioonis!\n"

#
#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
msgid "Firewalling configuration detected!"
msgstr "Leitud tulem��ri s�tted!"

#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Hoiatus! Leiti olemasolevad tulem��ri s�tted. T�en�oliselt peaksite need "
"hiljem �le vaatame."

#: ../../standalone/drakgw_.c:277
msgid "Configuring..."
msgstr "Seadistan..."

#: ../../standalone/drakgw_.c:278
msgid "Configuring scripts, installing software, starting servers..."
msgstr "H��lestan skriptid, installin tarkvara, k�ivitan serverid..."

#: ../../standalone/drakgw_.c:311
#, c-format
msgid "Problems installing package %s"
msgstr "Probleemid paketi %s installimisel"

#: ../../standalone/drakgw_.c:600
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"K�ik on seadistatud.\n"
"N��d saate interneti�hendust jagada teistele kohtv�rgu arvutitele, kasutades "
"neil automaatset konfigureerimist (DHCP)"

#: ../../standalone/drakgw_.c:617
msgid "The setup has already been done, but it's currently disabled."
msgstr "Interneti�henduse jagamine on juba seadistatud aga hetkel keelatud."

#: ../../standalone/drakgw_.c:618
msgid "The setup has already been done, and it's currently enabled."
msgstr ""
"Interneti�henduse jagamine on juba seadistatud ja see on praegu aktiivne."

#: ../../standalone/drakgw_.c:619
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Interneti�henduse jagamist ei ole kunagi seadistatud"

#: ../../standalone/drakgw_.c:624
msgid "Internet connection sharing configuration"
msgstr "Interneti jagamise seadistamine"

#: ../../standalone/drakgw_.c:631
#, fuzzy, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Interneti�henduse jagamise Abimees!\n"
"\n"
"%s\n"
"\n"
"Valige Abimehe k�ivitamiseks ``OK''"

#: ../../standalone/draknet_.c:79
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "V�rgus�tted (%d liidest)"

#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
msgid "Profile: "
msgstr "Profiil: "

#: ../../standalone/draknet_.c:94
msgid "Del profile..."
msgstr "Kustuta profiil..."

#: ../../standalone/draknet_.c:100
msgid "Profile to delete:"
msgstr "Profiil kustutamiseks:"

#: ../../standalone/draknet_.c:128
msgid "New profile..."
msgstr "Uus profiil..."

#: ../../standalone/draknet_.c:134
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/draknet_.c:160
msgid "Hostname: "
msgstr "Masinanimi: "

#: ../../standalone/draknet_.c:167
msgid "Internet access"
msgstr "Interneti�hendus"

#: ../../standalone/draknet_.c:180
msgid "Type:"
msgstr "T��p: "

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Gateway:"
msgstr "Vaikel��s:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Interface:"
msgstr "Liides:"

#: ../../standalone/draknet_.c:192
msgid "Status:"
msgstr "Olek:"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Connected"
msgstr "�hendatud"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Not connected"
msgstr "Ei ole �hendatud"

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Connect..."
msgstr "�henda..."

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Disconnect..."
msgstr "Lahuta..."

#: ../../standalone/draknet_.c:215
#, fuzzy
msgid "Starting your connection..."
msgstr "Testime Teie �hendust..."

#: ../../standalone/draknet_.c:223
msgid "Closing your connection..."
msgstr "Sulgeme n��d �henduse..."

#: ../../standalone/draknet_.c:228
msgid ""
"The connection is not closed.\n"
"Try to do it manually by running\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"in root."
msgstr ""
"V�rgu�hendus ei ole suletud.\n"
"Proovige seda teha k�sitsi, k�ivitades\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"juurkasutajana."

#: ../../standalone/draknet_.c:231
msgid "The system is now disconnected."
msgstr "S�steem on n��d Internetist lahutatud."

#: ../../standalone/draknet_.c:243
msgid "Configure Internet Access..."
msgstr "Seadiste interneti�hendus..."

#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
msgid "LAN configuration"
msgstr "LAN s�tted"

#: ../../standalone/draknet_.c:255
msgid "Driver"
msgstr "Juhtprogramm"

#: ../../standalone/draknet_.c:255
msgid "Interface"
msgstr "Liides"

#: ../../standalone/draknet_.c:255
msgid "Protocol"
msgstr "Protokoll"

#: ../../standalone/draknet_.c:255
#, fuzzy
msgid "State"
msgstr "Olek:"

#: ../../standalone/draknet_.c:267
msgid "Configure Local Area Network..."
msgstr "Seadista kohtv�rk (LAN) ..."

#: ../../standalone/draknet_.c:279
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/draknet_.c:306
msgid "Apply"
msgstr "Rakenda"

#: ../../standalone/draknet_.c:325
msgid "Please Wait... Applying the configuration"
msgstr "Palun oodake... Rakendan seadistusi"

#: ../../standalone/draknet_.c:428
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/draknet_.c:450
msgid "LAN Configuration"
msgstr "LAN s�tted"

#: ../../standalone/draknet_.c:457
#, c-format
msgid "Adapter %s: %s"
msgstr "V�rgukaart %s: %s"

#: ../../standalone/draknet_.c:463
msgid "Boot Protocol"
msgstr "Laadimisprotokoll"

#: ../../standalone/draknet_.c:464
msgid "Started on boot"
msgstr "K�ivitub laadimisel"

#: ../../standalone/draknet_.c:465
msgid "DHCP client"
msgstr "DHCP klient"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "activate now"
msgstr "Aktiivne"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
#, fuzzy
msgid "desactivate now"
msgstr "Aktiivne"

#: ../../standalone/draknet_.c:538
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/draknet_.c:562
msgid "Internet connection configuration"
msgstr "Interneti�henduse seadistamine"

#: ../../standalone/draknet_.c:566
msgid "Internet Connection Configuration"
msgstr "Interneti�henduse seadistamine"

#: ../../standalone/draknet_.c:575
msgid "Connection type: "
msgstr "�henduse t��p: "

#: ../../standalone/draknet_.c:581
msgid "Parameters"
msgstr "Parameetrid"

#: ../../standalone/draknet_.c:608
msgid "Ethernet Card"
msgstr "V�rgukaart"

#: ../../standalone/draknet_.c:609
msgid "DHCP Client"
msgstr "DHCP klient"

#: ../../standalone/draksec_.c:21
msgid "Welcome To Crackers"
msgstr "Tere tulemast, kr�kkerid"

#: ../../standalone/draksec_.c:22
msgid "Poor"
msgstr "V�hene"

#: ../../standalone/draksec_.c:26
msgid "Paranoid"
msgstr "Paranoiline"

#: ../../standalone/draksec_.c:29
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Seda tase muudab k�ll s�steemi lihtsalt kasutatavaks, kui v�ga\n"
"haavatavaks: ligip��supiirangute puudumise t�ttu ei peaks arvutit �hendama\n"
"ei teiste arvutitega ega ka mitte Internetti."

#: ../../standalone/draksec_.c:32
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Salas�nad on n��d kasutusel, kuid v�rku �hendamine ei ole siiski soovitav."

#: ../../standalone/draksec_.c:33
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr "Turvataset on parandatud, lisatud on hoiatusi ja piiranguid."

#: ../../standalone/draksec_.c:35
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"See on sobilik turvatase arvutile, mis �hendatakse Internetti kui klient."

#: ../../standalone/draksec_.c:37
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr "Sellel turvatasemel v�ib s�steemi kasutada Internetis ka serverina."

#: ../../standalone/draksec_.c:40
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"S�steem on t�ielikult suletud. V�rgust kasutamine on v�imalik ainult\n"
"spetsiaalselt loodud juurdep��suteid kasutades."

#: ../../standalone/draksec_.c:65
#, fuzzy
msgid "Security level"
msgstr "Turvataseme seadmine"

#: ../../standalone/draksec_.c:67
#, fuzzy
msgid "Use libsafe for servers"
msgstr "Valige X server"

#: ../../standalone/draksec_.c:68
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: ../../standalone/draksec_.c:72
msgid "Setting security level"
msgstr "Turvataseme seadmine"

#: ../../standalone/drakxconf_.c:47
msgid "Control Center"
msgstr "Juhtimiskeskus"

#: ../../standalone/drakxconf_.c:48
msgid "Choose the tool you want to use"
msgstr "Valige kasutatav vahend"

#: ../../standalone/keyboarddrake_.c:16
msgid "usage: keyboarddrake [--expert] [keyboard]\n"
msgstr "kasutamiseks: keyboarddrake [--expert] [keyboard]\n"

#: ../../standalone/keyboarddrake_.c:36
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"

#: ../../standalone/livedrake_.c:23
msgid "Change Cd-Rom"
msgstr "Vaheta CD plaat"

#: ../../standalone/livedrake_.c:24
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Palun sisestage installeerimise CD pealdisega lugejasse ja vajutage <OK>.\n"
"Kui teil s�herdust ei ole, vajutage <Katkesta>, et kiiruendust v�ltida."

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr "Ei saa kiiruuendust alustada !!!\n"

#: ../../standalone/mousedrake_.c:58
msgid "no serial_usb found\n"
msgstr "ei leitud: serial_usb\n"

#: ../../standalone/mousedrake_.c:62
msgid "Emulate third button?"
msgstr "Teeskleme keskmist hiirenuppu?"

#
#: ../../standalone/tinyfirewall_.c:29
msgid "Firewalling Configuration"
msgstr "Tulem��ri s�tted"

#: ../../standalone/tinyfirewall_.c:42
msgid "Firewalling configuration"
msgstr "Tulem��ri s�tted"

#: ../../standalone/tinyfirewall_.c:77
msgid ""
"Firewalling\n"
"\n"
"You already have set up a firewall.\n"
"Click on Configure to change or remove the firewall"
msgstr ""
"Tulem��r\n"
"\n"
"Tulem��ri olete juba seadistanud.\n"
"Valige 'Seadista', et midagi muuta"

#: ../../standalone/tinyfirewall_.c:81
msgid ""
"Firewalling\n"
"\n"
"Click on Configure to set up a standard firewall"
msgstr ""
"Tulem��r\n"
"\n"
"Valige 'Seadista', selle seadistamiseks n��d"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "Valige sobiv keel"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "Valige paigaldusmeetod"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "K�vaketta leidmine"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Hiire seadmine"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "Klaviatuuri valik"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "Turvalisus"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "Failis�steemid"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Vormindamine"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "Pakettide valik"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "S�steemi installimine"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Tavakasutaja"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "V�rgus�tted"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Teenuste s�tted"

#: ../../steps.pm_.c:30
msgid "Create a bootdisk"
msgstr "Loo alglaadimisflopi"

#: ../../steps.pm_.c:32
msgid "Install bootloader"
msgstr "Alglaaduri s�tted"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Seadista X"

#: ../../steps.pm_.c:34
msgid "Exit install"
msgstr "V�lju programmist"

#: ../../tinyfirewall.pm_.c:9
msgid ""
"tinyfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"tinyfirewall seadistamine\n"
"\n"
"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
"Kui vajate v�imsat tulem��ri, vaadake palun\n"
"spetsiaalset MandrakeSecurity Firewall distributsiooni."

#: ../../tinyfirewall.pm_.c:14
msgid ""
"We'll now ask you questions about which services you'd like to allow\n"
"the Internet to connect to.  Please think carefully about these\n"
"questions, as your computer's security is important.\n"
"\n"
"Please, if you're not currently using one of these services, firewall\n"
"it off.  You can change this configuration anytime you like by\n"
"re-running this application!"
msgstr ""
"N��d k�sitakse Teilt millistele teenustele soovite lubada ligip��su\n"
"Internetist. Palun m�elge hoolega, nende vastuste �le, sest tegu on\n"
"ju Teie arvuti turvalisusega.\n"
"\n"
"Palun, kui te ei soovi hetkel m�nd neist kasutada, pange see igaks\n"
"juhuks tulem��ri taha. Hiljem on Teil soovi korral vaba voli k�ike\n"
"uuesti lubada."

#: ../../tinyfirewall.pm_.c:21
msgid ""
"Are you running a web server on this machine that you need the whole\n"
"Internet to see? If you are running a webserver that only needs to be\n"
"accessed by this machine, you can safely answer NO here.\n"
"\n"
msgstr ""
"Kas sellel arvutil hakkab t��le veebiserver, mida k�lastatakse kogu\n"
"Internetist? Kui vajate ligip��su vaid samast arvutist, vastake\n"
"siin EI.\n"
"\n"

#: ../../tinyfirewall.pm_.c:26
msgid ""
"Are you running a name server on this machine? If you didn't set one\n"
"up to give away IP and zone information to the whole Internet, please\n"
"answer no.\n"
"\n"
msgstr ""
"Kas sellel arvutil hakkab t��le nimeserver? Kui Te seda ei soovi\n"
"siis vastake palun ei.\n"
"\n"

#: ../../tinyfirewall.pm_.c:31
msgid ""
"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
"is a telnet-replacement that you might use to login. If you're using\n"
"telnet now, you should definitely switch to ssh. telnet is not\n"
"encrypted -- so some attackers can steal your password if you use\n"
"it. ssh is encrypted and doesn't allow for this eavesdropping."
msgstr ""
"Kas soovite sisenevaid SSH �hendusi? SSH on turvaline asendus telnetile.\n"
"Telneti kaudu �le v�rgu masinasse sisenemine on ��rmisel ebaturvaline\n"
"kuna sel teel on lihtsate vahenditega v�imalik v�rgus paroole varastada.\n"
"SSH korral on �hendus kr�ptitud ja pealtkuulamine praktiliselt v�listatud."

#: ../../tinyfirewall.pm_.c:36
msgid ""
"Do you want to allow incoming telnet connections?\n"
"This is horribly unsafe, as we explained in the previous screen. We\n"
"strongly recommend answering No here and using ssh in place of\n"
"telnet.\n"
msgstr ""
"Kas soovite lubada sisenevaid telneti �hendusi?\n"
"See on t�eliselt ebaturvaline, vastake siin palun Ei ja kasutage\n"
"telneti asemel SSH-d.\n"

#: ../../tinyfirewall.pm_.c:41
msgid ""
"Are you running an FTP server here that you need accessible to the\n"
"Internet? If you are, we strongly recommend that you only use it for\n"
"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
"attackers, since FTP also uses no encryption for transferring passwords.\n"
msgstr ""
"Kas soovite sellel arvuti k�ivitada avaliku FTP serveri? Kui see on\n"
"t�esti Teie soov, siis lubage palun ainult anon��mne ligip��s, sest\n"
"muul juhul tekib j�lle paroolide varastamise oht, sest FTP ei tunne\n"
"kr�ptimist.\n"

#: ../../tinyfirewall.pm_.c:46
msgid ""
"Are you running a mail server here? If you're sending you \n"
"messages through pine, mutt or any other text-based mail client,\n"
"you probably are.  Otherwise, you should firewall this off.\n"
"\n"
msgstr ""
"Kas Teil on jooksmas avalik meiliserver? Vastasel juhul on\n"
"palju turvalisem siia tulem� ette panna.\n"
"\n"

#: ../../tinyfirewall.pm_.c:51
msgid ""
"Are you running a POP or IMAP server here? This would\n"
"be used to host non-web-based mail accounts for people via \n"
"this machine.\n"
"\n"
msgstr ""
"Kas vajate sellel masinal POP v�i IMAP serverit?\n"
"\n"

#: ../../tinyfirewall.pm_.c:56
msgid ""
"You appear to be running a 2.2 kernel.  If your network IP\n"
"is automatically set by a computer in your home or office \n"
"(dynamically assigned), we need to allow for this.  Is\n"
"this the case?\n"
msgstr ""
"Teil on kasutusel 2.2 kernel. Kui IP aadress antakse Teie arvutile\n"
"d�naamiliselt, siis peaks seda siinkohal lubama.\n"

#: ../../tinyfirewall.pm_.c:61
msgid ""
"Is your computer getting time syncronized to another computer?\n"
"Mostly, this is used by medium-large Unix/Linux organizations\n"
"to synchronize time for logging and such.  If you're not part\n"
"of a larger office and haven't heard of this, you probably \n"
"aren't."
msgstr ""
"Kas see arvuti kuulub v�rku, millest masinad s�nkroniseerivad\n"
"omavahel kellaaega? T�en�oliselt v�ite selle rahulikult keelata."

#: ../../tinyfirewall.pm_.c:66
msgid ""
"Configuration complete.  May we write these changes to disk?\n"
"\n"
"\n"
"\n"
msgstr ""
"Seadistused tehtud. Kas salvestada s�tted kettale?\n"
"\n"
"\n"
"\n"

#: ../../tinyfirewall.pm_.c:82
#, fuzzy, c-format
msgid "Can't open %s: %s\n"
msgstr "V�rgukaart %s: %s"

#: ../../tinyfirewall.pm_.c:84
#, fuzzy, c-format
msgid "Can't open %s for writing: %s\n"
msgstr "Seadme %s avamine kirjutamiseks eba�nnestus: %s"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Server, Veeb/FTP"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "V�rguarvuti (klient)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS, SMB, SSH server, vahendaja (proxy)"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Kontor"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome t��jaam"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Suhtlus Palmi v�i Visoriga"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "T��jaam"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Tulem��r/marsruuter"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Kontoriprogrammid: tekstit��tlus (kword, abiword), tabelarvutus (kspread, "
"gnumeric), PDF eelvaade jne"

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Audio-v�rgid: mp3 ja midi, mikserid jms"

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Raamatud ja Howto-d Linux ja vabavara kohta"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE t��jaam"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm jt"

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimeedia - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Meili, uudiste, veebi, jututamise ja faili�lekande programmid"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Server, Andmebaasid"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Vahendid lihtsamaks s�steemi administreerimiseks"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimeedia - Heli"

#: ../../share/compssUsers:999
msgid "Utilities"
msgstr "Utiliidid"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentatsioon"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konsooliprogrammid"

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Interneti t��jaam"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimeedia t��jaam"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "LAN s�tted"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Veel graafilisi t��laudu (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop Environment, graafiline t��keskkond ja rida seonduvaid rakendusi"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Graafiline keskkond"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Arendus"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache ja Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "Vahendid CD-de kirjutamiseks"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Kontori t��jaam"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Graafikaprogrammid nagu Gimp"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C ja C++ arendusteegid, programmid ja p�isefailid"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer server"
msgstr "Failiserver"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr "Server, Meil/grupit��/uudised"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "M�nguvahend"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Video esitamine ja redigeerimine"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimeedia - Graafika"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Meelelahutus: arcade, boards, strategy jne"

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr "Komplekt programme meili ja uudiste lugemiseks ning veebi brausimiseks"

#: ../../share/compssUsers:999
msgid "Archiving, emulators, monitoring"
msgstr "Arhiveerimine, emuleerimine, monitoorimine"

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Isiklikud finantsid"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr "Graafiline t��keskkond koos kasutajas�bralike rakendustega"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Mitmete protokollide, sealhulgas ssh kliendid"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet gateway"
msgstr "Interneti�hendus"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Heli ja video esitamine ja redigeerimine"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Muud graafilised t��lauad"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Editorid, shellid, terminalid, failihaldus"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "Isiklike finantside haldusvahendid"

#: ../../share/compssUsers:999
msgid "Games"
msgstr "M�ngud"

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Isikliku info haldamine"

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimeedia - CD kirjutamine"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Teadust��jaam"

#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
#~ msgstr "ei saa lugeda faili /etc/sysconfig/autologin: %s"

#~ msgid "Do you want to restart the network"
#~ msgstr "Kas soovite v�rgu�hendust taask�ivitada?"

#~ msgid ""
#~ "\n"
#~ "Do you agree?"
#~ msgstr ""
#~ "\n"
#~ "Kas olete n�us?"

#~ msgid "I'm about to restart the network device:\n"
#~ msgstr "N��d taask�ivitan v�rguliidese:\n"

#~ msgid "I'm about to restart the network device %s. Do you agree?"
#~ msgstr "Kas olete valmis v�rguliidese %s taask�ivitamiseks?"

#, fuzzy
#~ msgid ""
#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
#~ msgstr ""
#~ "Tavaline valik on \"/dev/hda\" (esimese IDE kanali master), kui Te ei\n"
#~ "tea t�pselt, et tahate teisiti teha."

#, fuzzy
#~ msgid ""
#~ "The following printers are configured.\n"
#~ "You can add some more or modify the existing ones."
#~ msgstr ""
#~ "Kirjeldatud on j�rgnevad prindij�rjekorrad.\n"
#~ "Te v�ite neid lisada ning olemasolevaid muuta."

#, fuzzy
#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
#~ msgstr "�henduse t��p: "

#, fuzzy
#~ msgid "Could not set \"%s\" as the default printer!"
#~ msgstr "Valige uus vaikimisi kasutaja :"

#, fuzzy
#~ msgid "Test the mouse here."
#~ msgstr "Palun testige hiirt"

#~ msgid ""
#~ "Please choose your preferred language for installation and system usage."
#~ msgstr "Valige keel s�steemi installimiseks ja kasutamiseks."

#~ msgid ""
#~ "You need to accept the terms of the above license to continue "
#~ "installation.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Accept\" if you agree with its terms.\n"
#~ "\n"
#~ "\n"
#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
#~ "will end without modifying your current\n"
#~ "configuration."
#~ msgstr ""
#~ "Et installimist j�tkata, peate n�ustuma �laltoodud "
#~ "litsentsitingimustega.\n"
#~ "\n"
#~ "\n"
#~ "Palun valige \"N�us\", kui n�ustute nendega.\n"
#~ "\n"
#~ "\n"
#~ "Palun valige \"Keeldun\", kui ei pea neile tingimistele allumist "
#~ "v�imalikuks. Installimine l�petatakse, tegemata Teie s�steemis muutusi."

#~ msgid "Choose the layout corresponding to your keyboard from the list above"
#~ msgstr "Valige klaviatuuripaigutus �laltoodud nimekirjast"

#~ msgid ""
#~ "If you wish other languages (than the one you choose at\n"
#~ "beginning of installation) will be available after installation, please "
#~ "chose\n"
#~ "them in list above. If you want select all, you just need to select \"All"
#~ "\"."
#~ msgstr ""
#~ "Kui soovite, et peale installimist oleks v�imalik kasutada veel "
#~ "erinevaid\n"
#~ "keeli, valige need �laltoodud nimekirjast. Valik \"K�ik\" lisab toe\n"
#~ "k�igile keeltele."

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!"
#~ msgstr ""
#~ "Valige:\n"
#~ "\n"
#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
#~ "vastavalt\n"
#~ "   Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie "
#~ "arvuti \n"
#~ "   edaspidisest kasutusalast.\n"
#~ "\n"
#~ "\n"
#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
#~ "   s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
#~ "   Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA TEETE!"

#~ msgid ""
#~ "You must now define your machine usage. Choices are:\n"
#~ "\n"
#~ "* Workstation: this the ideal choice if you intend to use your machine "
#~ "primarily for everyday use, at office or\n"
#~ "  at home.\n"
#~ "\n"
#~ "\n"
#~ "* Development: if you intend to use your machine primarily for software "
#~ "development, it is the good choice. You\n"
#~ "  will then have a complete collection of software installed in order to "
#~ "compile, debug and format source code,\n"
#~ "  or create software packages.\n"
#~ "\n"
#~ "\n"
#~ "* Server: if you intend to use this machine as a server, it is the good "
#~ "choice. Either a file server (NFS or\n"
#~ "  SMB), a print server (Unix style or Microsoft Windows style), an "
#~ "authentication server (NIS), a database\n"
#~ "  server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
#~ "etc.) to be installed."
#~ msgstr ""
#~ "N��d m��rake oma arvuti peamne kasutusala. Valikud on:\n"
#~ "\n"
#~ "* T��jaam: valige, kui kavatsete oma arvutit rakendada igap�evategemiste "
#~ "tarvis (kontorirakendused,\n"
#~ "  graafika ja muu selline).\n"
#~ "\n"
#~ "\n"
#~ "* Arendus: installitakse t�iskomplekt vahendeid eri programmeerimiskeelte "
#~ "kasutamiseks, allikkoodi loomiseks,\n"
#~ "  kompileerimiseks, silumiseks jne.\n"
#~ "\n"
#~ "\n"
#~ "* Server: valige see, kui vajate Mandrake Linux serverit. Saate "
#~ "serveerida faile (NFS v�i SMB), printida\n"
#~ "  (Unixi stiilis lp v�i Windowsi SMB), lisaks andmebaasid, "
#~ "veebirakendused jms. Installimata\n"
#~ "  j�etakse graafiline kasutajaliides (KDE, GNOME...)."

#~ msgid ""
#~ "You may now select the group of packages you wish to\n"
#~ "install or upgrade.\n"
#~ "\n"
#~ "\n"
#~ "DrakX will then check whether you have enough room to install them all. "
#~ "If not,\n"
#~ "it will warn you about it. If you want to go on anyway, it will proceed "
#~ "onto the\n"
#~ "installation of all selected groups but will drop some packages of "
#~ "lesser\n"
#~ "interest. At the bottom of the list you can select the option \n"
#~ "\"Individual package selection\"; in this case you will have to browse "
#~ "through\n"
#~ "more than 1000 packages..."
#~ msgstr ""
#~ "N��d v�ite valida paketigruppe installimiseks v�i uuendamiseks\n"
#~ "\n"
#~ "\n"
#~ "DrakX kontrollib, kas Teil on ikka piisavalt vaba ruumi nende k�igi "
#~ "jaoks.\n"
#~ "kui mitte, hoiatab ta Teid. Kui Te hoiatusest ei hooli j�etakse "
#~ "automaatselt\n"
#~ "k�rvale v�hemolulised paketid.\n"
#~ "Nimekirja l�pus saate valida \"Valik paketthaaval\"; sel juhul aga peate\n"
#~ "l�bi sirvima �le 1000 �ksiku paketi..."

#~ msgid ""
#~ "You can now choose individually all the packages you\n"
#~ "wish to install.\n"
#~ "\n"
#~ "\n"
#~ "You can expand or collapse the tree by clicking on options in the left "
#~ "corner of\n"
#~ "the packages window.\n"
#~ "\n"
#~ "\n"
#~ "If you prefer to see packages sorted in alphabetic order, click on the "
#~ "icon\n"
#~ "\"Toggle flat and group sorted\".\n"
#~ "\n"
#~ "\n"
#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
#~ "dependencies\". If you do this, note that unselecting one package may "
#~ "silently\n"
#~ "unselect several other packages which depend on it."
#~ msgstr ""
#~ "N��d saate pakette �kshaaval installimiseks valida\n"
#~ "\n"
#~ "\n"
#~ "Paketipuud saate avada ja sulgeda vasakpoolses nurgas asuvatest nuppudest."

#~ msgid ""
#~ "If you have all the CDs in the list above, click Ok. If you have\n"
#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
#~ "them,\n"
#~ "then click Ok."
#~ msgstr ""
#~ "Kui Teil on olemas k�ik �laltoodud CD-d, klikkige <OK>.\n"
#~ "Kui Teil ei ole �htki neist, klikkige <Katkesta>.\n"
#~ "Kui puuduvad m�ned CD-d, j�tke m�rgituks vaid olemasolevad ja siis <OK>."

#~ msgid ""
#~ "If you wish to connect your computer to the Internet or\n"
#~ "to a local network please choose the correct option. Please turn on your "
#~ "device\n"
#~ "before choosing the correct option to let DrakX detect it automatically.\n"
#~ "\n"
#~ "\n"
#~ "If you do not have any connection to the Internet or a local network, "
#~ "choose\n"
#~ "\"Disable networking\".\n"
#~ "\n"
#~ "\n"
#~ "If you wish to configure the network later after installation or if you "
#~ "have\n"
#~ "finished to configure your network connection, choose \"Done\"."
#~ msgstr ""
#~ "Kui soovite oma arvuti �hendada Internetti v�i kohtv�rku, tehke palun\n"
#~ "�ige valik. V�lise seadme korrektseks tuvastamiseks on vajalik, et see "
#~ "oleks\n"
#~ "sisse l�litatud ja arvutiga �hendatud\n"
#~ "\n"
#~ "\n"
#~ "Kui Te ei soovi v�rgu�hendust kasutada, valige \"Keela v�rgu�hendus\".\n"
#~ "\n"
#~ "\n"
#~ "Kui soovite v�rgu�henduse seadistada hiljem, valige \"Tehtud\"."

#~ msgid ""
#~ "No modem has been detected. Please select the serial port on which it is "
#~ "plugged.\n"
#~ "\n"
#~ "\n"
#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
#~ "Windows) is called \"ttyS0\" under Linux."
#~ msgstr ""
#~ "Modemit ei leitud. Palun valige seerialport, kuhu see on �hendatud.\n"
#~ "\n"
#~ "\n"
#~ "Igaks juhuks: esimese seerialpordi (\"COM1\" Microsoft Windowsis) nimi\n"
#~ "on GNU/Linux s�steemis \"ttyS0\"."

#~ msgid ""
#~ "You may now enter dialup options. If you don't know\n"
#~ "or are not sure what to enter, the correct informations can be obtained "
#~ "from\n"
#~ "your Internet Service Provider. If you do not enter the DNS (name "
#~ "server)\n"
#~ "information here, this information will be obtained from your Internet "
#~ "Service\n"
#~ "Provider at connection time."
#~ msgstr ""
#~ "Sisestage sissehelistamiskeskuse andmed. Kui Te neid ei tea\n"
#~ "v�i kahtlete, saate oma teenusepakkujalt (ISP-l) kindlasti abi.\n"
#~ "N�iteks info nimeserveri (DNS) kohta saab tavaliselt �henduse\n"
#~ "loomise ajal automaatselt"

#~ msgid ""
#~ "If your modem is an external modem, please turn on it now to let DrakX "
#~ "detect it automatically."
#~ msgstr ""
#~ "Kui Teil on v�line modem, siis l�litage see palun n��d sisse, et DrakX "
#~ "saaks seda tuvastada."

#~ msgid "Please turn on your modem and choose the correct one."
#~ msgstr "Palun l�litage modem sisse ja valige nimekirjast �ige."

#~ msgid ""
#~ "If you are not sure if informations above are\n"
#~ "correct or if you don't know or are not sure what to enter, the correct\n"
#~ "informations can be obtained from your Internet Service Provider. If you "
#~ "do not\n"
#~ "enter the DNS (name server) information here, this information will be "
#~ "obtained\n"
#~ "from your Internet Service Provider at connection time."
#~ msgstr ""
#~ "Kui Te ei ole kindlad, et �laltoodud informatsioon vastab t�ele\n"
#~ "v�i Te ei tea, mida sisestada, k�sige abi oma internetiteenuse pakkujalt\n"
#~ "(ISP-lt). N�iteks info nimeserveri (DNS) kohta saab tavaliselt �henduse\n"
#~ "loomise ajal automaatselt"

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, the correct informations can "
#~ "be\n"
#~ "obtained from your Internet Service Provider."
#~ msgstr ""
#~ "N��d sisestage oma arvuti nimi, kui see on vajalik. Kui kahtlete, siis "
#~ "peaksite k�sima lisainformatsiooni oma ISP k�est."

#~ msgid ""
#~ "You may now configure your network device.\n"
#~ "\n"
#~ "   * IP address: if you don't know or are not sure what to enter, ask "
#~ "your network administrator.\n"
#~ "     You should not enter an IP address if you select the option "
#~ "\"Automatic IP\" below.\n"
#~ "\n"
#~ "   * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
#~ "know or are not sure what to enter,\n"
#~ "     ask your network administrator.\n"
#~ "\n"
#~ "   * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
#~ "this option. If selected, no value is needed in\n"
#~ "    \"IP address\". If you don't know or are not sure if you need to "
#~ "select this option, ask your network administrator."
#~ msgstr ""
#~ "V�rguliidese seadistamiseks on vajalik:\n"
#~ "\n"
#~ "   * IP-aadress: kui Te seda ei teha, k�sige oma v�rguhaldurilt v�i\n"
#~ "internetiteenuse pakkujalt (ISP).\n"
#~ "\n"
#~ "   * V�rgumask: \"255.255.255.0\" on tavaliselt sobiv. Igaks juhuks "
#~ "v�ite\n"
#~ "v�rguhalduri v�i ISP k�est �le k�sida.\n"
#~ "\n"
#~ "   * Automaatne IP: Kui Teie v�rgus on kasutusel BOOTP v�i DHCP.\n"
#~ "Selle valimisel ei pea v�lja \"IP-aadress\" t�itma. Kui kahtlete\n"
#~ "k�sige j�llegi oma v�rguhaldurilt v�i ISP-lt."

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, ask your network administrator."
#~ msgstr ""
#~ "Kui Teie v�rgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
#~ "korral\n"
#~ "k�sige v�rguhaldurilt."

#~ msgid ""
#~ "You may now enter your host name if needed. If you\n"
#~ "don't know or are not sure what to enter, leave blank."
#~ msgstr ""
#~ "Kui vaja, sisestage oma s�steemi nimi. Kui Teil ei\n"
#~ "ole �htki head m�tet, j�tke see rida t�hjaks"

#~ msgid ""
#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
#~ "correct information can be obtained from your ISP."
#~ msgstr ""
#~ "N��d sisestage oma sissehelistamisteenuse pakkuja andmed. Kui ei ole "
#~ "kindel,\n"
#~ "mida kuhu sisestada, k�sige oma ISP k�est �le."

#~ msgid ""
#~ "If you will use proxies, please configure them now. If you don't know if\n"
#~ "you should use proxies, ask your network administrator or your ISP."
#~ msgstr ""
#~ "Kui peate kasutama vahendajaid (tulem��ri vms), seadistage need n��d. "
#~ "Kui\n"
#~ "kahtlete, on abiks v�rguhaldur v�i ISP"

#~ msgid ""
#~ "You can install cryptographic package if your internet connection has "
#~ "been\n"
#~ "set up correctly. First choose a mirror where you wish to download "
#~ "packages and\n"
#~ "after that select the packages to install.\n"
#~ "\n"
#~ "\n"
#~ "Note you have to select mirror and cryptographic packages according\n"
#~ "to your legislation."
#~ msgstr ""
#~ "Kr�ptopakette saate installida p�rast Interneti�henduse seadistamist.\n"
#~ "Esmalt valige peegel, kust soovite pakette alla laadida ja seej�rel\n"
#~ "valige paketid.\n"
#~ "\n"
#~ "\n"
#~ "M�rkus: kr�ptopakettide valimisel peate arvesse v�tma ka v�imalikke\n"
#~ "�iguslikke piiranguid oma asukohamaal."

#~ msgid "You can now select your timezone according to where you live."
#~ msgstr "N��d saate valida ajav��tme vastavalt oma asukohale."

#~ msgid ""
#~ "You can configure a local printer (connected to your computer) or remote\n"
#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
#~ msgstr ""
#~ "Teil on v�imalus seadistada kas kohalik (Teie arvutiga �hendatud) v�i\n"
#~ "v�rguprinter (Unix, Netware v�i Microsoft Windows v�rgus)"

#~ msgid ""
#~ "If you wish to be able to print, please choose one printing system "
#~ "between\n"
#~ "CUPS and LPR.\n"
#~ "\n"
#~ "\n"
#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
#~ "(CUPS\n"
#~ "means \"Common Unix Printing System\"). It is the default printing system "
#~ "in\n"
#~ "Mandrake Linux.\n"
#~ "\n"
#~ "\n"
#~ "LPR is the old printing system used in previous Mandrake Linux "
#~ "distributions.\n"
#~ "\n"
#~ "\n"
#~ "If you don't have printer, click on \"None\"."
#~ msgstr ""
#~ "Kui soovite vahetevahel printida, valige palun selleks sobiv meetod, "
#~ "CUPS\n"
#~ "v�i LPR.\n"
#~ "\n"
#~ "\n"
#~ "CUPS on uus, v�imas ja paindlik printimiss�steem Unix keskkonnas (CUPS -\n"
#~ "Common Unix Printing System). Mandrake Linux kasutab vaikimisi seda.\n"
#~ "\n"
#~ "\n"
#~ "LPR on vanem meetod, mis oli kasutusel ka eelmistest Mandrake Linux\n"
#~ "distributsioonides.\n"
#~ "\n"
#~ "\n"
#~ "Kui Teil ei olegi printerit, valige \"Ei soovi\"."

#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these types "
#~ "requires\n"
#~ "a different setup.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select \"Local\n"
#~ "printer\".\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine, select\n"
#~ "\"Remote printer\".\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Microsoft Windows "
#~ "machine\n"
#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
#~ msgstr ""
#~ "GNU/Linux oskab toimetada mitut t��pi printeritega. Iga�ht neist "
#~ "seadistatakse\n"
#~ "erinevalt.\n"
#~ "\n"
#~ "\n"
#~ "Kui Teie printer on f��siliselt arvutiga �hendatud, valige \"Kohalik "
#~ "printer\"\n"
#~ "\n"
#~ "\n"
#~ "Kui soovite kasutada v�rguprinterit Unix serveril, valige \"V�rguprinter"
#~ "\".\n"
#~ "\n"
#~ "\n"
#~ "Kui soovite kasutada v�rguprinteri Windows serveril (v�i muidu �le SMB\n"
#~ "protokolli), valige  \"SMB/Windows 95/98/NT\"."

#~ msgid ""
#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
#~ "\n"
#~ "You have to enter some informations here.\n"
#~ "\n"
#~ "\n"
#~ "   * Name of printer: the print spooler uses \"lp\" as default printer "
#~ "name. So, you must have a printer named \"lp\".\n"
#~ "     If you have only one printer, you can use several names for it. You "
#~ "just need to separate them by a pipe\n"
#~ "     character (a \"|\"). So, if you prefer a more meaningful name, you "
#~ "have to put it first, eg: \"My printer|lp\".\n"
#~ "     The printer having \"lp\" in its name(s) will be the default "
#~ "printer.\n"
#~ "\n"
#~ "\n"
#~ "   * Description: this is optional but can be useful if several printers "
#~ "are connected to your computer or if you allow\n"
#~ "     other computers to access to this printer.\n"
#~ "\n"
#~ "\n"
#~ "   * Location: if you want to put some information on your\n"
#~ "     printer location, put it here (you are free to write what\n"
#~ "     you want, for example \"2nd floor\").\n"
#~ msgstr ""
#~ "Palun l�litage oma printer sisse ja laske DrakX-il seda tuvastade.\n"
#~ "\n"
#~ "Samuti on vaja sisestada lisainformatsiooni:\n"
#~ "\n"
#~ "\n"
#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
#~ "peab Teil olema v�hemalt �he printeri nimi \"lp\".\n"
#~ "     Kui Teil ongi ainult �ks printer, saate sellele anda ka mitu nime. "
#~ "Nimed peavad olema eraldatud s�mboliga \"|\"\n"
#~ "     Seega, kui soovite, et nimel oleks ka mingi t�hendus, kirjutage "
#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie s�steemi "
#~ "jaoks vaikimisi printeriks.\n"
#~ "\n"
#~ "\n"
#~ "  * Kirjeldus: see ei ole kohustuslik, kuid v�ib osutuda vajalikuks, kui "
#~ "Teil on n�iteks mitu kohalikku printerit ja soovite neid v�rgus v�lja "
#~ "jagada\n"
#~ "\n"
#~ "\n"
#~ "  * Asukoht: kui soovite anda t�iendavat informatsiooni printeri "
#~ "asukohast\n"
#~ "    N�iteks: \"Teise korruse keskel\".\n"

#~ msgid ""
#~ "You need to enter some informations here.\n"
#~ "\n"
#~ "\n"
#~ "   * Name of queue: the print spooler uses \"lp\" as default printer "
#~ "name. So, you need have a printer named \"lp\".\n"
#~ "    If you have only one printer, you can use several names for it. You "
#~ "just need to separate them by a pipe\n"
#~ "    character (a \"|\"). So, if you prefer to have a more meaningful "
#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
#~ "    The printer having \"lp\" in its name(s) will be the default "
#~ "printer.\n"
#~ "\n"
#~ "  \n"
#~ "   * Spool directory: it is in this directory that printing jobs are "
#~ "stored. Keep the default choice\n"
#~ "     if you don't know what to use\n"
#~ "\n"
#~ "\n"
#~ "   * Printer Connection: If your printer is physically connected to your "
#~ "computer, select \"Local printer\".\n"
#~ "     If you want to access a printer located on a remote Unix machine, "
#~ "select \"Remote lpd printer\".\n"
#~ "\n"
#~ "\n"
#~ "     If you want to access a printer located on a remote Microsoft "
#~ "Windows machine (or on Unix machine using SMB\n"
#~ "     protocol), select \"SMB/Windows 95/98/NT\".\n"
#~ "\n"
#~ "\n"
#~ "     If you want to acces a printer located on NetWare network, select "
#~ "\"NetWare\".\n"
#~ msgstr ""
#~ "N��d on vaja lisainformatsiooni.\n"
#~ "\n"
#~ "\n"
#~ "   * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
#~ "peab Teil olema v�hemalt �he printeri nimi \"lp\".\n"
#~ "     Kui Teil ongi ainult �ks printer, saate sellele anda ka mitu nime. "
#~ "Nimed peavad olema eraldatud s�mboliga \"|\"\n"
#~ "     Seega, kui soovite, et nimel oleks ka mingi t�hendus, kirjutage "
#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
#~ "     Printer, mille nimede hulgas on \"lp\", saab olema Teie s�steemi "
#~ "jaoks vaikimisi printeriks.\n"
#~ "\n"
#~ "\n"
#~ "  * Spuulkataloog: kataloog, kus spuuler hoiab ajutisi faile enne "
#~ "printimist. Seda ei ole soovitav muuta.\n"
#~ "\n"
#~ "\n"
#~ "  * Printeri �hendusviis: Kui Teie printer on f��siliselt Teie arvuti "
#~ "k�ljes, valige \"Kohalik printer\".\n"
#~ "    Kui soovite kasutada printerit UNIX serveri k�ljes, valige \"lpd "
#~ "printserver\".\n"
#~ "\n"
#~ "\n"
#~ "   Kui soovite kasutada printerit Microsoft Windows v�rgus (v�i SMB "
#~ "serveril) valige \"SMB/Windows 95/98/NT\".\n"
#~ "\n"
#~ "\n"
#~ "   Kui soovite kasutada NetWare serveril asuvat printerit, valige "
#~ "\"NetWare\".\n"

#~ msgid ""
#~ "Your printer has not been detected. Please enter the name of the device "
#~ "on\n"
#~ "which it is connected.\n"
#~ "\n"
#~ "\n"
#~ "For information, most printers are connected on the first parallel port. "
#~ "This\n"
#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
#~ "Windows."
#~ msgstr ""
#~ "Teie printerit ei �nnestunud tuvastada. Palun abistavat infot v�imaliku\n"
#~ "�henduspistiku kohta.\n"
#~ "\n"
#~ "\n"
#~ "Enamasti on printer �hendatud esimesse paralleelporti. GNU/Linuxis on "
#~ "selle\n"
#~ "nimeks \"/dev/lp0\" ja Microsoft Windowsis \"LPT1\"."

#~ msgid "You must now select your printer in the above list."
#~ msgstr "Valige printer �laltoodud nimekirjast."

#~ msgid ""
#~ "Please select the right options according to your printer.\n"
#~ "Please see its documentation if you don't know what choose here.\n"
#~ "\n"
#~ "\n"
#~ "You will be able to test your configuration in next step and you will be "
#~ "able to modify it if it doesn't work as you want."
#~ msgstr ""
#~ "Palun valige oma printerile sobivad s�tted.\n"
#~ "Abi saate ilmselt ka printeri dokumentatsioonist.\n"
#~ "\n"
#~ "\n"
#~ "J�rgmisel sammul saate oma seadistusi testida ja soovi korral muuta, kui "
#~ "midagi ei t��ta nagu vaja."

#~ msgid ""
#~ "You can now enter the root password for your Mandrake Linux system.\n"
#~ "The password must be entered twice to verify that both password entries "
#~ "are identical.\n"
#~ "\n"
#~ "\n"
#~ "Root is the system's administrator and is the only user allowed to modify "
#~ "the\n"
#~ "system configuration. Therefore, choose this password carefully. \n"
#~ "Unauthorized use of the root account can be extemely dangerous to the "
#~ "integrity\n"
#~ "of the system, its data and other system connected to it.\n"
#~ "\n"
#~ "\n"
#~ "The password should be a mixture of alphanumeric characters and at least "
#~ "8\n"
#~ "characters long. It should never be written down.\n"
#~ "\n"
#~ "\n"
#~ "Do not make the password too long or complicated, though: you must be "
#~ "able to\n"
#~ "remember it without too much effort."
#~ msgstr ""
#~ "N��d peate sisestama s�steemi juurkasutaja (root) parooli. Et v�hendada\n"
#~ "eksimisv�imalust, tehke seda kaks korda.\n"
#~ "\n"
#~ "\n"
#~ "Juurkasutaja on s�steemi t�htsaim kasutaja ja ainuke, kes tohib teha\n"
#~ "muudatusi s�steemi s�tetesse. Seep�rast valige juurkasutaja parooli "
#~ "erilise\n"
#~ "hoolega.\n"
#~ "\n"
#~ "Hea salas�na peaks olema kombinatsioon t�htedest ja numbritest \n"
#~ "ning v�hemalt 8 m�rki pikk. �rge *kunagi* kirjutage oma parooli �les!\n"
#~ "\n"
#~ "\n"
#~ "Samas ei peaks see olema liiga pikk ja keeruline meelde j�tmiseks."

#~ msgid ""
#~ "You may now create one or more \"regular\" user account(s), as\n"
#~ "opposed to the \"privileged\" user account, root. You can create\n"
#~ "one or more account(s) for each person you want to allow to use\n"
#~ "the computer. Note that each user account will have its own\n"
#~ "preferences (graphical environment, program settings, etc.)\n"
#~ "and its own \"home directory\", in which these preferences are\n"
#~ "stored.\n"
#~ "\n"
#~ "\n"
#~ "First of all, create an account for yourself! Even if you will be the "
#~ "only user\n"
#~ "of the machine, you may NOT connect as root for daily use of the system: "
#~ "it's a\n"
#~ "very high security risk. Making the system unusable is very often a typo "
#~ "away.\n"
#~ "\n"
#~ "\n"
#~ "Therefore, you should connect to the system using the user account\n"
#~ "you will have created here, and login as root only for administration\n"
#~ "and maintenance purposes."
#~ msgstr ""
#~ "N��d saate luua �he v�i rohkem \"tavakasutaja\" kontot. ��rmiselt "
#~ "soovitav\n"
#~ "on luua igale arvuti kasutajale eraldi konto(d). Sel viisi saab iga "
#~ "kasutaja\n"
#~ "valida ise endale sobiva graafilise keskkonna kujunduse ja programmide "
#~ "s�tted.\n"
#~ "K�ik kasutaja failid saavad hoitud ja kaitstud tema isiklikus "
#~ "kodukataloogis.\n"
#~ "\n"
#~ "\n"
#~ "Esmalt looge konto iseendale, ka siis kui olete s�steemi ainuke "
#~ "kasutaja.\n"
#~ "�rge tehke oma igap�evatoimetusi juurkasutajana, suurendades sel viisil\n"
#~ "turvariski! Vale juurkasutaja n�puliigutus v�ib s�steemi kergesti\n"
#~ "kasutusk�lbmatuks muuta!\n"
#~ "\n"
#~ "\n"
#~ "Juurkasutaja �igused on ainult administreerimiseks ja hoolduseks,\n"
#~ "k�ike muud tehke palun tavakasutajana"

#~ msgid ""
#~ "Creating a boot disk is strongly recommended. If you can't\n"
#~ "boot your computer, it's the only way to rescue your system without\n"
#~ "reinstalling it."
#~ msgstr ""
#~ "Alglaadimisketta loomine on ��rmiselt soovitatav. Kui peaks kunagi\n"
#~ "tekkima probleeme s�steemi laadimisel, v�i alglaadmisketas olla Teie\n"
#~ "ainuke p��setee uue installimise k�rval."

#~ msgid ""
#~ "LILO and grub main options are:\n"
#~ "  - Boot device: Sets the name of the device (e.g. a hard disk\n"
#~ "partition) that contains the boot sector. Unless you know specifically\n"
#~ "otherwise, choose \"/dev/hda\".\n"
#~ "\n"
#~ "\n"
#~ "  - Delay before booting default image: Specifies the number in tenths\n"
#~ "of a second the boot loader should wait before booting the first image.\n"
#~ "This is useful on systems that immediately boot from the hard disk after\n"
#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
#~ "omitted or is set to zero.\n"
#~ "\n"
#~ "\n"
#~ "  - Video mode: This specifies the VGA text mode that should be selected\n"
#~ "when booting. The following values are available: \n"
#~ "\n"
#~ "    * normal: select normal 80x25 text mode.\n"
#~ "\n"
#~ "    * <number>:  use the corresponding text mode.\n"
#~ "\n"
#~ "\n"
#~ "  - Clean \"/tmp\" at each boot: if you want delete all files and "
#~ "directories\n"
#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
#~ "\n"
#~ "\n"
#~ "  - Precise RAM if needed: unfortunately, there is no standard method to "
#~ "ask the\n"
#~ "BIOS about the amount of RAM present in your computer. As consequence, "
#~ "Linux may\n"
#~ "fail to detect your amount of RAM correctly. If this is the case, you "
#~ "can\n"
#~ "specify the correct amount or RAM here. Please note that a difference of "
#~ "2 or 4\n"
#~ "MB between detected memory and memory present in your system is normal."
#~ msgstr ""
#~ "LILO ja grub-i peamised suvandid on:\n"
#~ "  - Alglaadimisseade: m��ratakse k�vaketas v�i partitsioon, kus asub\n"
#~ "alglaadimissektor. Kui Te just t�pselt ei tea, mida teete,\n"
#~ "\"/dev/hda\".\n"
#~ "\n"
#~ "\n"
#~ "  - Ooteaeg alglaadimisel: m��ratakse ooteaeg sekundik�mnendikes enne\n"
#~ "vaikimisi laadimist.\n"
#~ "\n"
#~ "\n"
#~ "  - Graafikamood: m��ratakse VGA tekstmood s�steemi laadimisel. "
#~ "V�imalikud\n"
#~ "on j�rgmised valikud:\n"
#~ "\n"
#~ "    * normal: tavaline 80x25 tekstimood\n"
#~ "\n"
#~ "    * <number>:  numbrile vastav tekstimood.  - Puhasta /tmp "
#~ "alglaadimisel: kui soovite kustutada s�steemi alglaadimisel,\n"
#~ "valige see\n"
#~ "\n"
#~ "\n"
#~ "  - T�psust RAM hulk kui vajalik: kahjuks ei ole �htki standardset "
#~ "meetodit Teie\n"
#~ "arvutis leiduva operatiivm�lu (RAM) koguse �raarvamiseks. Kui siinkohal "
#~ "on eksimine\n"
#~ "2 v�i 4 MB, siis ei maksa sellele v�ga t�helepanu p��rata."

#~ msgid ""
#~ "SILO is a bootloader for SPARC: it is able to boot\n"
#~ "either GNU/Linux or any other operating system present on your computer.\n"
#~ "Normally, these other operating systems are correctly detected and\n"
#~ "installed. If this is not the case, you can add an entry by hand in this\n"
#~ "screen. Be careful as to choose the correct parameters.\n"
#~ "\n"
#~ "\n"
#~ "You may also want not to give access to these other operating systems to\n"
#~ "anyone, in which case you can delete the corresponding entries. But\n"
#~ "in this case, you will need a boot disk in order to boot them!"
#~ msgstr ""
#~ "SILO on alglaadur SPARC arhitektuurile: see v�imaldab laadida\n"
#~ "kas GNU/Linuxi v�i m�ne muu Teie arvutis oleva operatsioonis�steemi.\n"
#~ "Tavaliselt tuvastakse teised operatsioonis�steemid �igesti ja seadista-\n"
#~ "takse ka alglaadur. Kui Teil aga ei ole �nne, tuleb parameetrid seada\n"
#~ "k�sitsi. Olge sel juhul hoolas valima �iged."

#~ msgid ""
#~ "SILO main options are:\n"
#~ "  - Bootloader installation: Indicate where you want to place the\n"
#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
#~ "\n"
#~ "\n"
#~ "  - Delay before booting default image: Specifies the number in tenths\n"
#~ "of a second the boot loader should wait before booting the first image.\n"
#~ "This is useful on systems that immediately boot from the hard disk after\n"
#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
#~ "omitted or is set to zero."
#~ msgstr ""
#~ "SILO peamised suvandid on:\n"
#~ "  - Alglaaduri paigaldus: m��ratakse k�vaketas v�i partitsioon, kus "
#~ "soovite\n"
#~ "hoida GNU/Linuxi laadimiseks vajalikku infot. Kui Te just t�pselt ei "
#~ "tea,\n"
#~ "mida teete, valige \"K�vaketta esimene sektor (MBR)\".\n"
#~ "\n"
#~ "\n"
#~ "  - Ooteaeg alglaadimisel: m��ratakse aeg sekundik�mnendikes enne "
#~ "vaikimisi\n"
#~ "laadimist."

#~ msgid ""
#~ "Now it's time to configure the X Window System, which is the\n"
#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
#~ "you must configure your video card and monitor. Most of these\n"
#~ "steps are automated, though, therefore your work may only consist\n"
#~ "of verifying what has been done and accept the settings :)\n"
#~ "\n"
#~ "\n"
#~ "When the configuration is over, X will be started (unless you\n"
#~ "ask DrakX not to) so that you can check and see if the\n"
#~ "settings suit you. If they don't, you can come back and\n"
#~ "change them, as many times as necessary."
#~ msgstr ""
#~ "On aeg konfigureerida \"X Window System\" ehk lihtsalt X. X on\n"
#~ "GNU/Linuxi graafilise kasutajaliidese s�da. Sel eesm�rgil peame koos\n"
#~ "seadistama Teie graafikakaardi ja monitori. Enamus sellest protsessist\n"
#~ "on automatiseeritud ja Teie �lesandeks on ainult DrakX-i\n"
#~ "valikutega n�ustuda (v�i mitte :))\n"
#~ "\n"
#~ "\n"
#~ "Kui saame seadistamisega hakkama, k�ivitakse X (kui Te ei anna\n"
#~ "eraldi k�sku mitte nii teha)."

#~ msgid ""
#~ "If something is wrong in X configuration, use these options to correctly\n"
#~ "configure the X Window System."
#~ msgstr ""
#~ "Kui midagi on X-i seadistustega valesti, saab siinkohal v�imalikke vigu\n"
#~ "parandada."

#~ msgid ""
#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
#~ "select\n"
#~ "\"No\"."
#~ msgstr ""
#~ "Kui eelistate graafilist s�steemi sisenemist, valige \"Jah\". "
#~ "Konsoolimoodi\n"
#~ "eelistamisel valige \"Ei\"."

#~ msgid ""
#~ "You can choose a security level for your system. Please refer to the "
#~ "manual for complete\n"
#~ "  information. Basically, if you don't know what to choose, keep the "
#~ "default option.\n"
#~ msgstr ""
#~ "N��d saate valida oma s�steemis kasutatava turvataseme. Palun vaadake "
#~ "lisainfot selle kohta ka\n"
#~ " kasutajajuhendist. �ldiselt, kui Te ei tea, mida teete, j�tke siia "
#~ "vaikimisi valik.\n"

#~ msgid ""
#~ "Your system is going to reboot.\n"
#~ "\n"
#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
#~ "If you want to boot into another existing operating system, please read\n"
#~ "the additional instructions."
#~ msgstr ""
#~ "Teie s�steem sooritab alglaadimise.\n"
#~ "\n"
#~ "Taask�ivitumisel laaditakse Teie uus Mandrake Linux s�steem "
#~ "automaatselt.\n"
#~ "Kui soovite laadida m�nd muud operatsioonis�steemi, lugege palun\n"
#~ "lisainformatsiooni."

#~ msgid "Czech (Programmers)"
#~ msgstr "T�ehhi (programmeerijad)"

#~ msgid "Slovakian (Programmers)"
#~ msgstr "Slovaki (programmeerijad)"

#~ msgid "Name of the profile to create:"
#~ msgstr "Loodava profiili nimi:"

#~ msgid "Write /etc/fstab"
#~ msgstr "Kirjuta /etc/fstab"

#~ msgid "Restore from file"
#~ msgstr "Taasta failist"

#~ msgid "Save in file"
#~ msgstr "Salvesta faili"

#~ msgid "Restore from floppy"
#~ msgstr "Taasta flopilt"

#~ msgid "Format all"
#~ msgstr "Vorminda k�ik"

#~ msgid "After formatting all partitions,"
#~ msgstr "P�rast k�igi partitsioonide vormindamist"

#~ msgid "all data on these partitions will be lost"
#~ msgstr "on k�ik andmed neil partitsioonidel h�vivad"

#~ msgid "Reload"
#~ msgstr "Laadi uuesti"

#~ msgid ""
#~ "Do you want to generate an auto install floppy for linux replication?"
#~ msgstr "Kas soovite luua kiirpaigaldusflopi (abiks korduval paigaldusel)?"

#~ msgid "ADSL configuration"
#~ msgstr "ADSL s�tted"

#~ msgid ""
#~ "With a remote CUPS server, you do not have to configure\n"
#~ "any printer here; printers will be automatically detected\n"
#~ "unless you have a server on a different network; in the\n"
#~ "latter case, you have to give the CUPS server IP address\n"
#~ "and optionally the port number."
#~ msgstr ""
#~ "Kui v�rgus on CUPS server, siis ei ole Teil vaja siin\n"
#~ "printereid seadistada, need leitakse automaatselt.\n"
#~ "Kui server asub kuskil kaugemal, peate sisestama CUPS serveri\n"
#~ "IP-aadress ning soovitavalt ka pordi numbri."

#~ msgid "Remote queue"
#~ msgstr "Prindij�rjekorra nimi"

#, fuzzy
#~ msgid "Remote queue name missing!"
#~ msgstr "Prindij�rjekorra nimi"

#, fuzzy
#~ msgid "Command line"
#~ msgstr "Domeeninimi"

#, fuzzy
#~ msgid "Modify printer"
#~ msgstr "Printerit ei ole"

#, fuzzy
#~ msgid "start it"
#~ msgstr "piiratud"

#, fuzzy
#~ msgid "Network Monitoring"
#~ msgstr "V�rgus�tted"

#~ msgid "Profile "
#~ msgstr "Profiil "

#, fuzzy
#~ msgid "Connection Time: "
#~ msgstr "�henduse t��p: "

#, fuzzy
#~ msgid "Connecting to Internet "
#~ msgstr "Loo interneti�hendus"

#, fuzzy
#~ msgid "Disconnecting from Internet "
#~ msgstr "Katkesta interneti�hendus"

#, fuzzy
#~ msgid "Disconnection from Internet failed."
#~ msgstr "Katkesta interneti�hendus"

#, fuzzy
#~ msgid "Disconnection from Internet complete."
#~ msgstr "Katkesta interneti�hendus"

#, fuzzy
#~ msgid "Connection complete."
#~ msgstr "�henduse nimi"

#, fuzzy
#~ msgid "Color configuration"
#~ msgstr "Seadistused"

#, fuzzy
#~ msgid "average"
#~ msgstr "r�mps"

#, fuzzy
#~ msgid "Connect"
#~ msgstr "�hendatud"

#, fuzzy
#~ msgid "Disconnect"
#~ msgstr "Lahuta..."

#~ msgid "/File/_New"
#~ msgstr "/Fail/_Uus"

#~ msgid "<control>N"
#~ msgstr "<control>N"

#~ msgid "/File/_Open"
#~ msgstr "/Fail/_Ava"

#~ msgid "<control>O"
#~ msgstr "<control>O"

#~ msgid "/File/_Save"
#~ msgstr "/Fail/_Salvesta"

#~ msgid "<control>S"
#~ msgstr "<control>S"

#~ msgid "/File/Save _As"
#~ msgstr "/Fail/Salvesta _Kui"

#~ msgid "/File/-"
#~ msgstr "/Fail/-"

#~ msgid "/_Options"
#~ msgstr "/_Eelistused"

#~ msgid "/Options/Test"
#~ msgstr "/Eelistused/Test"

#~ msgid "/_Help"
#~ msgstr "/_Abi"

#~ msgid "/Help/_About..."
#~ msgstr "/Abi/_Misv�rk"

#, fuzzy
#~ msgid "Default Runlevel"
#~ msgstr "Vaikimisi"

#~ msgid "Europe"
#~ msgstr "Euroopa"

#~ msgid "NetWare"
#~ msgstr "NetWare"

#~ msgid "Remove queue"
#~ msgstr "Eemalda prindij�rjekord"

#~ msgid "Config file content could not be interpreted."
#~ msgstr "S�tete fail ei ole arusaadav."

#~ msgid "Unrecognized config file"
#~ msgstr "Tundmatu s�ttefaili"

#~ msgid "Adapter"
#~ msgstr "V�rgukaart"

#~ msgid "Disable network"
#~ msgstr "Keela v�rgu�hendus"

#, fuzzy
#~ msgid "Enable network"
#~ msgstr "Keela v�rgu�hendus"

#~ msgid ""
#~ "You can now test your mouse. Use buttons and wheel to verify\n"
#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
#~ "another\n"
#~ "driver."
#~ msgstr ""
#~ "N��d saate oma hiirt testida. Kasutage nii nuppe kui ratast. Kui tundub\n"
#~ "midagi valesti olevat, klikkige <Katkesta> uue juhtprogrammi valimiseks."

#~ msgid "DSL (or ADSL) connection"
#~ msgstr "DSL (v�i ADSL) �hendus"

#, fuzzy
#~ msgid "Choose"
#~ msgstr "Hiir"

#~ msgid "You can specify directly the URI to access the printer with CUPS."
#~ msgstr "V�ite anda ette ka URI, mille j�rgi CUPS printeri leiab."

#~ msgid "Yes, print ASCII test page"
#~ msgstr "Jah, tr�ki ASCII testlehek�lg"

#~ msgid "Yes, print PostScript test page"
#~ msgstr "Jah, tr�ki PostSript testlehek�lg"

#~ msgid "Paper Size"
#~ msgstr "Paberi suurus"

#~ msgid "Eject page after job?"
#~ msgstr "T�� l�petamisel v�ljasta kogu leht?"

#~ msgid "Uniprint driver options"
#~ msgstr "Kas optimiseerime k�vaketast?"

#~ msgid "Color depth options"
#~ msgstr "Mooduli parameetrid:"

#~ msgid "Print text as PostScript?"
#~ msgstr "Tr�kkida tekst PostScriptina?"

#~ msgid "Fix stair-stepping text?"
#~ msgstr "Paranda trepitud tekst?"

#~ msgid "Number of pages per output pages"
#~ msgstr "Lehek�lgi �hel paberil"

#~ msgid "Right/Left margins in points (1/72 of inch)"
#~ msgstr "Lehe laiuse m�rgid punktides (1/72 tollile)"

#~ msgid "Top/Bottom margins in points (1/72 of inch)"
#~ msgstr "Lehe k�rguse m�rgid punktides (1/72 tollile)"

#~ msgid "Extra GhostScript options"
#~ msgstr "Lisa GhostScript parameetrid"

#~ msgid "Extra Text options"
#~ msgstr "Lisa teksti parameetrid"

#~ msgid "Reverse page order"
#~ msgstr "Viimane leht enne"

#~ msgid "CUPS starting"
#~ msgstr "CUPS k�ivitatakse"

#~ msgid "Select Remote Printer Connection"
#~ msgstr "Vali v�rguprinteri �hendusviis"

#~ msgid ""
#~ "Every printer need a name (for example lp).\n"
#~ "Other parameters such as the description of the printer or its location\n"
#~ "can be defined. What name should be used for this printer and\n"
#~ "how is the printer connected?"
#~ msgstr ""
#~ "Masinal v�ib olla mitu printerit, millest iga�ks vajab nime\n"
#~ "(sageli lp) ja printkataloogi. Millist nime peaks kasutama\n"
#~ "kasutama selle printeri puhul ja kuidas see on �hendatud?"

#~ msgid ""
#~ "Every print queue (which print jobs are directed to) needs a\n"
#~ "name (often lp) and a spool directory associated with it. What\n"
#~ "name and directory should be used for this queue and how is the printer "
#~ "connected?"
#~ msgstr ""
#~ "Masinal v�ib olla mitu prindij�rjekorda, millest iga�ks vajab nime\n"
#~ "(sageli lp) ja spuulkataloogi (ajutiste failide jaoks). Millist nime\n"
#~ "ja kataloogi peaks kasutama selle printeri puhul ja kuidas see on "
#~ "�hendatud?"

#~ msgid "Name of queue"
#~ msgstr "Printeri nimi"

#~ msgid "Spool directory"
#~ msgstr "Spuulkataloog"

#~ msgid "Disable"
#~ msgstr "Keela"

#~ msgid "Enable"
#~ msgstr "Luba"

#, fuzzy
#~ msgid "Light configuration"
#~ msgstr "LAN s�tted"

#~ msgid "Provider dns 1"
#~ msgstr "Teenusepakkuja DNS 1"

#~ msgid "Provider dns 2"
#~ msgstr "Teenuspakkuja DNS 2"

#, fuzzy
#~ msgid "fsck failed: "
#~ msgstr "�hendamine eba�nnestus: "

#~ msgid ""
#~ "To enable a more secure system, you should select \"Use shadow file\" "
#~ "and\n"
#~ "\"Use MD5 passwords\"."
#~ msgstr ""
#~ "Turvalisema s�steemi saamiseks peaksite valima \"Kasuta varjutatud \n"
#~ "paroolifaili\" ja \"Kasuta parooli kaitsmiseks MD5 algoritmi\"."

#~ msgid ""
#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
#~ "your\n"
#~ "network administrator."
#~ msgstr ""
#~ "Kui Teie v�rgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
#~ "korral\n"
#~ "k�sige v�rguhaldurilt."

#~ msgid "yellow pages"
#~ msgstr "NIS YP"

#~ msgid "How do you want to connect to the Internet?"
#~ msgstr "Kuidas soovite luua interneti�hendust?"

#~ msgid "Configure..."
#~ msgstr "Seadista..."

#, fuzzy
#~ msgid "Lilo/Grub configuration"
#~ msgstr "LAN s�tted"

#~ msgid "Selected size %d%s"
#~ msgstr "Valitud suurus %d%s"

#~ msgid "Opening your connection..."
#~ msgstr "Testime Teie �hendust..."

#, fuzzy
#~ msgid "Configuration de Lilo/Grub"
#~ msgstr "Seadistused: Lisa asukoht"

#~ msgid "This startup script try to load your modules for your usb mouse."
#~ msgstr "See skript proovib seadistada USB hiirt"

#~ msgid "Boot style configuration"
#~ msgstr "Alglaadimise stiil"

#~ msgid ""
#~ "Now that your Internet connection is configured,\n"
#~ "your computer can be configured to share its Internet connection.\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN).\n"
#~ "\n"
#~ "Would you like to setup the Internet Connection Sharing?\n"
#~ msgstr ""
#~ "N��d on interneti�hendus seadistatud aga Teie arvutit\n"
#~ "saab panna ka seda jagama teistele arvutitele kohtv�rgus.\n"
#~ "M�rkus: kohtv�rgu jaoks on vajalik eraldi v�rgukaardi olemasolu\n"
#~ "\n"
#~ "Kas soovite interneti�hendust jagada?\n"

#~ msgid "Welcome to the Internet Connection Sharing utility!"
#~ msgstr "Interneti�henduse jagamine"

#~ msgid "Automatic dependencies"
#~ msgstr "Automaatsed s�ltuvused"

#~ msgid "Configure LILO/GRUB"
#~ msgstr "LILO/GRUB seadistamine"

#~ msgid "Create a boot floppy"
#~ msgstr "Loo alglaadimisflopi"

#~ msgid "Format floppy"
#~ msgstr "Vorminda flopi"

#~ msgid "Choice"
#~ msgstr "Valik"

#~ msgid "horizontal nice looking aurora"
#~ msgstr "horisontaalne kena aurora"

#~ msgid "vertical traditional aurora"
#~ msgstr "vertikaalne tavaline aurora"

#~ msgid "gMonitor"
#~ msgstr "gMonitor"

#~ msgid ""
#~ "You can now select some miscellaneous options for your system.\n"
#~ "\n"
#~ "* Use hard drive optimizations: this option can improve hard disk "
#~ "performance but is only for advanced users. Some buggy\n"
#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
#~ "builtin blacklist of drives and chipsets, but if\n"
#~ "  you want to avoid bad surprises, leave this option unset.\n"
#~ "\n"
#~ "\n"
#~ "* Choose security level: you can choose a security level for your system. "
#~ "Please refer to the manual for complete\n"
#~ "  information. Basically, if you don't know what to choose, keep the "
#~ "default option.\n"
#~ "\n"
#~ "\n"
#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
#~ "ask the BIOS about the amount of RAM present in\n"
#~ "  your computer. As consequence, Linux may fail to detect your amount of "
#~ "RAM correctly. If this is the case, you can\n"
#~ "  specify the correct amount or RAM here. Please note that a difference "
#~ "of 2 or 4 MB between detected memory and memory\n"
#~ "  present in your system is normal.\n"
#~ "\n"
#~ "\n"
#~ "* Removable media automounting: if you would prefer not to manually mount "
#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
#~ "  typing \"mount\" and \"umount\", select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
#~ "directories stored in \"/tmp\" when you boot your system,\n"
#~ "  select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Enable num lock at startup: if you want NumLock key enabled after "
#~ "booting, select this option. Please note that you\n"
#~ "  should not enable this option on laptops and that NumLock may or may "
#~ "not work under X."
#~ msgstr ""
#~ "N��d saate valida mitmesuguseid s�steemi k�itumise v�imalusi.\n"
#~ "\n"
#~ "* Optimiseeri k�vaketast: selle variandi puhul saate kiirendada\n"
#~ "  k�vaketta poole p��rdumist, kuid teatud vigaste emaplaatide puhul \n"
#~ "  v�ite k�vaketta rikkuda. Valige, kui olete endas kindel.\n"
#~ "\n"
#~ "\n"
#~ "* Valige turvatase: saate valida oma s�steemi turvalisuse taseme.\n"
#~ "  Palun vaadake manuaali, et saada turvatasemetest t�ielik �levaade.\n"
#~ "  Kui kahtlete, valige \"Keskmine\", et saada t�esti turvalist s�steemi,\n"
#~ "  valige \"Paranoiline\" aga olge ettevaatlik, n�iteks EI SAA SELLEL "
#~ "TASEMEL\n"
#~ "  JUURKASUTAJA SISSE LOGIDA! Peate kasutama k�sku 'su'. Mida "
#~ "turvalisem, \n"
#~ "  seda keerulisem kasutada!\n"
#~ "\n"
#~ "* T�psusta operatiivm�lu mahtu: v�ib esineda olukord, kus GNU/Linux ei\n"
#~ "  ole suuteline detekteerima t�pselt operatiivm�lu suurust. Kui see on\n"
#~ "  nii juhtunud, saate �elda ette tegeliku m�luhulga. Paneme t�hele, et\n"
#~ "  erinevus 2-4MB tuvastatud ja tegeliku m�lu hulga vahel on normaalne.\n"
#~ "\n"
#~ "\n"
#~ "* Irdandmekandjate automaatne �hendamine (supermount): Teie flopid, CD-d\n"
#~ "  ja Zip-kettad �hendatakse automaatselt (ilma mount/umount kasutamata)\n"
#~ "\n"
#~ "\n"
#~ "* Puhasta \"/tmp\" alglaadimisel: s�steemi laadimisel kustutatakse k�ik   "
#~ "failid \"/tmp\" kataloogist.\n"
#~ "\n"
#~ "* V�imalda NumLock alglaadimisel: s�steemi laadimisel muudetakse\n"
#~ "  konsoolimoodis NumLock aktiivseks"

#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
#~ msgstr "Vabandan, aga meili seadistamine ei ole praegu veel v�imalik."

#~ msgid ""
#~ "Welcome to The Network Configuration Wizard.\n"
#~ "Which components do you want to configure?\n"
#~ msgstr ""
#~ "See siin on v�rgu�henduse abimees.\n"
#~ "Mis komponente soovite seadistada?\n"

#~ msgid "Internet/Network access"
#~ msgstr "Interneti�hendus"

#~ msgid "Firewall Configuration Wizard"
#~ msgstr "V�rgu s�tete abimees"

#~ msgid "Miscellaneous"
#~ msgstr "Muud s�tted"

#~ msgid "Miscellaneous questions"
#~ msgstr "Muud k�simused"

#~ msgid "Can't use supermount in high security level"
#~ msgstr "K�rgel turvatasemel ei saa supermount-i kasutada"

#~ msgid ""
#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
#~ "More generally, do not expect to use your machine for anything but as a "
#~ "server.\n"
#~ "You have been warned."
#~ msgstr ""
#~ "SELLEL TURVATASEMEL EI OLE V�IMALIK S�STEEMI SISENEDA JUURKASUTAJANA!\n"
#~ "Juurkasutaja �iguste saamiseks tuleb siseneda tavakasutajana ja siis \n"
#~ "kasutada \"su\"-d.\n"
#~ "Serveri puhul on selline piirang t�iesti m�istlik.\n"
#~ "Teid on igal juhul hoiatatud."

#~ msgid ""
#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
#~ msgstr ""
#~ "Olge ettevaatlik, NumLock-i kasutamine v�ib p�hjustada (eriti kantavatel\n"
#~ "arvutitel) probleeme."

#~ msgid "not connected"
#~ msgstr "ei ole �hendatud"

#~ msgid "Actions"
#~ msgstr "Tegevused"

#~ msgid "Scientific applications"
#~ msgstr "Teadusrakendused"

#~ msgid "toot"
#~ msgstr "tuut"

#~ msgid "File/Print/Samba"
#~ msgstr "Server, Faili/prindi/samba"

#~ msgid "DNS/DHCP "
#~ msgstr "Server, DNS/DHCP"

#~ msgid "First DNS Server"
#~ msgstr "Esimene nimeserver:"

#~ msgid "Second DNS Server"
#~ msgstr "Teine nimeserver:"

#~ msgid "using module"
#~ msgstr "kasutades moodulit"

#~ msgid "Development, Database"
#~ msgstr "Arendus, Andmebaasid"

#~ msgid "Development, Integrated Environment"
#~ msgstr "Arendus, Graafilised keskkonnad"

#~ msgid "Development, Standard tools"
#~ msgstr "Arendus, standardvahendid"

#~ msgid ""
#~ "\n"
#~ "Warning:\n"
#~ "Applying the changes while running may crash your X environnement."
#~ msgstr ""
#~ "\n"
#~ "Hoiatus:\n"
#~ "Muudatuste rakendamine v�ib X keskkonna endast v�lja viia."

#~ msgid ""
#~ "\n"
#~ "If you continue, I will shut down your %s environnement"
#~ msgstr ""
#~ "\n"
#~ "J�tkamisel olen sunnitud Teie %s keskkonna seiskama"

#~ msgid "loopback"
#~ msgstr "loopback"

#~ msgid "Which bootloader(s) do you want to use?"
#~ msgstr "Millist alglaadurit soovite kasutada?"

#~ msgid "Auto install floppy"
#~ msgstr "Kiirpaigaldusflopi"

#~ msgid "Try to find a modem?"
#~ msgstr "Kas otsida modemit?"

#~ msgid "Configure an ISDN connection"
#~ msgstr "Seadista ISDN �hendus"

#~ msgid "Configure a cable connection"
#~ msgstr "Seadista TV-kaabli �hendus"

#~ msgid "Disable Internet Connection"
#~ msgstr "Keela �hendus Internetti"

#~ msgid "Configure local network"
#~ msgstr "Kohtv�rgu seadistamine"

#~ msgid "Configure the Internet connection / Configure local Network"
#~ msgstr "Seadista interneti�hendus / Seadista kohtv�rk"

#~ msgid ""
#~ "Local networking has already been configured.\n"
#~ "Do you want to:"
#~ msgstr ""
#~ "Kohtv�rk on juba seadistatud.\n"
#~ "Kas soovite:"

#~ msgid "Reconfigure using wizard..."
#~ msgstr "Seadistan uuesti abimehega..."

#~ msgid "Graphics Manipulation"
#~ msgstr "Graafikaprogrammid"

#~ msgid "Multimedia"
#~ msgstr "Multimeedia"

#~ msgid "Sciences"
#~ msgstr "Teadused"

#~ msgid ""
#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
#~ "file transfer tools"
#~ msgstr ""
#~ "Jututamise (IRC v�i IM) programmid xchat, licq, gaim ja faili�lekande "
#~ "vahendid"

#~ msgid "Communication facilities"
#~ msgstr "Suhtlemisvahendid"

#~ msgid "KDE"
#~ msgstr "KDE"

#~ msgid "Gnome"
#~ msgstr "Gnome"

#~ msgid "Internet Tools"
#~ msgstr "Interneti v�rgid"

#~ msgid "Databases clients and servers (mysql and postgresql)"
#~ msgstr "Andmebaasiserveri ja -kliendid (mysql ja postgresql)"

#~ msgid "Development C/C++"
#~ msgstr "C/C++ arendus"

#~ msgid "Configure timezone"
#~ msgstr "Ajav��tme m��ramine"

#~ msgid "Network adaptater 1 (eth0):"
#~ msgstr "Esimene v�rguliides (eth0)"

#~ msgid "isdn_internal"
#~ msgstr "isdn_internal"

#~ msgid "ippp0"
#~ msgstr "ippp0"

#~ msgid "(may cause data corruption)"
#~ msgstr "(v�ib tekitada andmete h�vimist)"

#~ msgid "Use hard drive optimisations?"
#~ msgstr "Kas optimiseerime k�vaketast?"

#~ msgid "Enable num lock at startup"
#~ msgstr "L�lita Num Lock k�ivitamisel sisse"

#~ msgid "Confirm Password"
#~ msgstr "Salas�na uuesti"

#~ msgid "default"
#~ msgstr "tavaline"

#~ msgid "Type :"
#~ msgstr "T��p: "

#~ msgid "What is your system used for?"
#~ msgstr "Milline on Teie s�steemi kasutusala?"

#~ msgid "Select the size you want to install"
#~ msgstr "Valige paigalduse maht"

#~ msgid "Use diskdrake"
#~ msgstr "Kasuta diskdrake-i"

#~ msgid "Customized"
#~ msgstr "Isetehtud"

#~ msgid ""
#~ "Are you sure you are an expert? \n"
#~ "You will be allowed to make powerful but dangerous things here.\n"
#~ "\n"
#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
#~ "are you ready to answer that kind of questions?"
#~ msgstr ""
#~ "Olete ikka kindlasti ekspert? \n"
#~ "Hei, ilma naljata, eksperdi valikud on laiemad kuid sellev�rra "
#~ "ohtlikumad.\n"
#~ "\n"
#~ "Teilt k�sitakse k�simusi n�iteks 'paroolifaili varjutamise' jms kohta,\n"
#~ "olete Te selleks valmis?"

#~ msgid "Use shadow file"
#~ msgstr "Kasuta varjutatud paroolifaili"

#~ msgid "shadow"
#~ msgstr "varjutatud"

#~ msgid "MD5"
#~ msgstr "MD5"

#~ msgid "Use MD5 passwords"
#~ msgstr "Kasuta parooli kaitsmiseks MD5 algoritmi"

#~ msgid "Search"
#~ msgstr "Otsi"

#~ msgid "Package"
#~ msgstr "Pakett"

#~ msgid "Text"
#~ msgstr "Tekst"

#~ msgid "Tree"
#~ msgstr "Puu"

#~ msgid "Sort by"
#~ msgstr "Sortimine"

#~ msgid "Category"
#~ msgstr "Kategoori"

#~ msgid "See"
#~ msgstr "Vaata"

#~ msgid "Installed packages"
#~ msgstr "Installitud paketid"

#~ msgid "Available packages"
#~ msgstr "K�ttesaadavad paketid"

#~ msgid "Show only leaves"
#~ msgstr "N�ita ainult �ksikuid"

#~ msgid "Expand all"
#~ msgstr "Ava k�ik"

#~ msgid "Collapse all"
#~ msgstr "Sule k�ik"

#~ msgid "Add location of packages"
#~ msgstr "Lisa pakettide asukoht"

#~ msgid "Update location"
#~ msgstr "Uuenda asukoht"

#~ msgid "Find Package"
#~ msgstr "Leia pakett"

#~ msgid "Find Package containing file"
#~ msgstr "Leia pakett faili j�rgi"

#~ msgid "Toggle between Installed and Available"
#~ msgstr "Installitud/Saadaval"

#~ msgid "Choose package to install"
#~ msgstr "Valige pakett installimiseks"

#~ msgid "Checking dependencies"
#~ msgstr "Kontrollin s�ltuvusi"

#~ msgid "Wait"
#~ msgstr "Oodake"

#~ msgid "The following packages are going to be uninstalled"
#~ msgstr "Eemaldatakse j�rgmised paketid"

#~ msgid "Uninstalling the RPMs"
#~ msgstr "RPM-ide eemaldamine"

#~ msgid "Regexp"
#~ msgstr "Regulaaravaldis"

#~ msgid "Which package are looking for"
#~ msgstr "Milline pakett vajab ressurssi"

#~ msgid "%s not found"
#~ msgstr "%s ei leitud"

#~ msgid "No match"
#~ msgstr "Ei leitud sobivat"

#~ msgid "No more match"
#~ msgstr "Ei leitud enam sobivaid"

#~ msgid ""
#~ "rpmdrake is currently in ``low memory'' mode.\n"
#~ "I'm going to relaunch rpmdrake to allow searching files"
#~ msgstr ""
#~ "rpmdrake on hetkel \"s��sturesiimil\".\n"
#~ "Failide otsimiseks k�ivitan rpmdrake uuesti"

#~ msgid "Which file are you looking for?"
#~ msgstr "Millist faili Te otsite?"

#~ msgid "What are looking for?"
#~ msgstr "Mida Te otsite?"

#~ msgid "Give a name (eg: `extra', `commercial')"
#~ msgstr "Andke nimi (nagu: 'extra, 'commercial')"

#~ msgid "Directory"
#~ msgstr "Kataloog"

#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
#~ msgstr "CD-d ei leitud (v�hemalt mitte /mnt/cdrom all)"

#~ msgid "URL of the directory containing the RPMs"
#~ msgstr "URL kataloogile, kus paiknevad RPM-id"

#~ msgid ""
#~ "For FTP and HTTP, you need to give the location for hdlist\n"
#~ "It must be relative to the URL above"
#~ msgstr ""
#~ "FTP ja HTTP jaoks on vaja ka hdlist-i asukohta\n"
#~ "See peab olema antud eelmise URLi suhtes"

#~ msgid "Please submit the following information"
#~ msgstr "Palun j�rgmist informatsiooni"

#~ msgid "%s is already in use"
#~ msgstr "%s on juba kasutusel"

#~ msgid "Updating the RPMs base"
#~ msgstr "Uuendan RPM andmebaasi"

#~ msgid "Going to remove entry %s"
#~ msgstr "Eemaldan kirje %s"

#~ msgid "Finding leaves"
#~ msgstr "Leian �lej��gid"

#~ msgid "Finding leaves takes some time"
#~ msgstr "�lej��kide leidmine v�tab veidi aega"

#~ msgid "I have found an ISDN Card:\n"
#~ msgstr "Leitud ISDN kaart:\n"

#~ msgid "France"
#~ msgstr "Prantsusmaa"

#~ msgid "Other countries"
#~ msgstr "Muud maad"

#~ msgid "In which country are you located ?"
#~ msgstr "Millisel maal Te praegu olete ?"

#~ msgid "Alcatel modem"
#~ msgstr "Alcatel modem"

#~ msgid "ECI modem"
#~ msgstr "ECI modem"

#~ msgid ""
#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
#~ msgstr "Kui teil on Alcatel-i modem, valige Alcatel. Muidu aga ECI"

#~ msgid "don't use pppoe"
#~ msgstr "�ra kasuta pppoe-d"

#~ msgid "mandatory"
#~ msgstr "kohustuslik"

#~ msgid "interesting"
#~ msgstr "huvitav"

#~ msgid "i18n (important)"
#~ msgstr "i18n (t�htis)"

#~ msgid "i18n (very nice)"
#~ msgstr "i18n (v�ga kena)"

#~ msgid "i18n (nice)"
#~ msgstr "i18n (kena)"

#~ msgid "Which serial port is your mouse connected to?"
#~ msgstr "Millisesse seerialporti on Teie hiir �hendatud?"

#~ msgid "Czech"
#~ msgstr "T�ehhi"

#~ msgid "Slovakian"
#~ msgstr "Slovaki"

#~ msgid "Could not install ipchains RPM with urpmi."
#~ msgstr "Ei saa installida 'ipchains' paketti urpmi abil."

#~ msgid "Could not install dhcp RPM with urpmi."
#~ msgstr "Ei saa installida DHCP paketti urpmi abil."

#~ msgid "Could not install linuxconf RPM with urpmi."
#~ msgstr "Ei saa installida linuxconf-i urpmi abil."

#~ msgid "Could not install bind RPM with urpmi."
#~ msgstr "Ei saa installida 'bind' paketti urpmi abil."

#~ msgid "Could not install caching-nameserver RPM with urpmi."
#~ msgstr "Ei saa installida nimeserveri vahendajat urpmi abil."

#~ msgid "Reconfigure local network"
#~ msgstr "Seadista kohtv�rk uuesti"

#~ msgid ""
#~ "Your computer can be configured to share its Internet connection.\n"
#~ "\n"
#~ msgstr ""
#~ "Teie arvutit saab seadistada interneti�henduse jagajana.\n"
#~ "\n"

#~ msgid "Everything has been configured.\n"
#~ msgstr "K�ik sai seadistatud.\n"

#~ msgid "Connect to Internet with a normal modem"
#~ msgstr "Kasuta Interneti jaoks tavamodemit"

#~ msgid "Connect to Internet using ISDN"
#~ msgstr "Kasuta Interneti jaoks ISDN modemit"

#~ msgid "Connect to Internet using DSL (or ADSL)"
#~ msgstr "Kasuta Interneti jaoks DSL (v�i ADSL) modemit"

#~ msgid "Connect to Internet using Cable"
#~ msgstr "Kasuta Interneti jaoks DOC kaablimodemit"

#~ msgid ""
#~ "Time (secs) of inactivity after which\n"
#~ "it hangs up. (leave blank to disable it)"
#~ msgstr ""
#~ "Mittekasutamise aeg, mille jooksul �hendus\n"
#~ "katkestatakse. (vaikimisi ei katkestata)"

#~ msgid "Germany"
#~ msgstr "Saksa"

#~ msgid "Germany (1TR6)"
#~ msgstr "Saksa (1TR6)"

#~ msgid "What do you wish to do?"
#~ msgstr "Mida Te soovite teha?"

#~ msgid "Install/Rescue"
#~ msgstr "Installi/Taasta"

#~ msgid "Rescue"
#~ msgstr "Taasta"

#~ msgid "Which partition type do you want?"
#~ msgstr "Mis t��pi partitsiooni soovite?"

#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
#~ "already installed.\n"
#~ "\n"
#~ "\n"
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed GNU/Linux before, choose "
#~ "this.\n"
#~ "\n"
#~ "  - Customized: If you are familiar enough with GNU/Linux, you may then "
#~ "choose\n"
#~ "    the primary usage for your machine. See below for details.\n"
#~ "\n"
#~ "  - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
#~ "    perform a highly customized installation. As for a \"Customized\"\n"
#~ "    installation class, you will be able to select the usage for your "
#~ "system.\n"
#~ "    But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
#~ "DOING!\n"
#~ msgstr ""
#~ "Valige \"Installimine\" kui varem sellele masinale GNU/Linuxit ei ole "
#~ "pandud\n"
#~ "v�i soovite kasutada mitut distributsiooni\n"
#~ "\n"
#~ "Valige \"Taastamine\" kui soovite taastada m�nd eelmist Mandrake "
#~ "Linuxit:\n"
#~ "%s v�i %s.\n"
#~ "\n"
#~ "\n"
#~ "Valige:\n"
#~ "\n"
#~ "  - Soovitatav: Te pole kunagi varem GNU/Linuxit installinud. \n"
#~ "\n"
#~ "  - Isetehtud: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
#~ "vastavalt\n"
#~ "    Teie vajadustele. J�rgmisena saate teha valikud s�ltuvalt Teie "
#~ "arvuti\n"
#~ "    edaspidisest kasutusalast.\n"
#~ "\n"
#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
#~ "    s�steemi, mis sobiks nagu valatult Teie t�psete ootustega.\n"
#~ "    Aga palun, palun: �RGE VALIGE SEDA, KUI TE T�PSELT EI TEA, MIDA "
#~ "TEETE!\n"

#~ msgid ""
#~ "At this point, you may choose what partition(s) to use to install\n"
#~ "your Mandrake Linux system if they have been already defined (from a\n"
#~ "previous install of GNU/Linux or from another partitioning tool). In "
#~ "other\n"
#~ "cases, hard drive partitions must be defined. This operation consists of\n"
#~ "logically dividing the computer's hard drive capacity into separate\n"
#~ "areas for use.\n"
#~ "\n"
#~ "\n"
#~ "If you have to create new partitions, use \"Auto allocate\" to "
#~ "automatically\n"
#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
#~ "by\n"
#~ "clicking on \"hda\" for the first IDE drive,\n"
#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
#~ "\n"
#~ "\n"
#~ "Two common partition are: the root partition (/), which is the starting\n"
#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
#~ "all files necessary to start the operating system when the\n"
#~ "computer is first turned on.\n"
#~ "\n"
#~ "SEAL\n"
#~ "Because the effects of this process are usually irreversible, "
#~ "partitioning\n"
#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
#~ "simplifies the process so that it must not be. Consult the documentation\n"
#~ "and take your time before proceeding.\n"
#~ "\n"
#~ "\n"
#~ "You can reach any option using the keyboard: navigate through the "
#~ "partitions\n"
#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
#~ "\n"
#~ "- Ctrl-c  to create a new partition (when an empty partition is "
#~ "selected)\n"
#~ "\n"
#~ "- Ctrl-d  to delete a partition\n"
#~ "\n"
#~ "- Ctrl-m  to set the mount point\n"
#~ msgstr ""
#~ "N��d peaksite valima partitsioon(id) Mandrake Linux installimiseks\n"
#~ "kui need on juba varem kettale defineeritud. Kui Te varem ei ole oma\n"
#~ "k�vaketast Linuxi jaoks partitsioneerinud, saate seda j�rgmises etapis\n"
#~ "teha. Partitsioneerimine t�hendab f��silise ketta jaotamist loogiliselt\n"
#~ "eraldatud osadeks.\n"
#~ "\n"
#~ "\n"
#~ "Kui ei tunne ennast sel alal kindlalt, valige \"Paiguta ise\", et\n"
#~ "automaatselt luua Linuxile vajalikud partitsioonid.\n"
#~ "Linuxi maailmas t�hendab \"hda\" esimest, \"hdb\" teist IDE k�vaketast,\n"
#~ "\"sda\" esimest. \"sdb\" teist SCSI k�vaketast jne. Partitsioneerimiseks\n"
#~ "valige kettaseade lihtsalt sellel klikkides.\n"
#~ "\n"
#~ "\n"
#~ "Kaks tavalist partitsiooni on juurpartitsioon (/), kus asub "
#~ "failis�steemi\n"
#~ "hierarhia algus ja /boot, mis sisaldab arvuti alglaadimiseks vajalikke "
#~ "faile, sealhulgas Linuxi kernelit.\n"
#~ "\n"
#~ "\n"
#~ "Kuna partitsioneerimine ei ole p��ratav protsess, v�ib see tekitada\n"
#~ "algajas kerget k�hedust. DiskDrake on selle teinud k�ll lihtsamaks,\n"
#~ "aga kindlasti tuleks enne iga liigutust s�gavalt j�rele m�telda ja\n"
#~ "soovitavalt ka dokumentatsiooniga tutvuda.\n"
#~ "\n"
#~ "K�iki tegevusi saate teha ka ainult klaviatuuri kasutades: liikuge\n"
#~ "partitsioonidel <TAB> ja �les-alla noolte abil. Partitsiooni valikul\n"
#~ "\n"
#~ "- Ctrl-C  loob uue partitsiooni (valige selleks vaba kettaala)\n"
#~ "- Ctrl-D  kustutab partitsiooni\n"
#~ "\n"
#~ "- Ctrl-M  seab �henduspunkti\n"

#~ msgid ""
#~ "Any partitions that have been newly defined must be formatted for\n"
#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
#~ "wish to re-format some already existing partitions to erase the data\n"
#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
#~ "partitions, particularly if they contain files or data you wish to keep.\n"
#~ "Typically retained are /home and /usr/local."
#~ msgstr ""
#~ "K�ik Teie poolt v�rskelt loodud partitsioonid tuleb kasutamiseks "
#~ "vormindada\n"
#~ "(luua failis�steemid). Partitsiooni vormindamisel h�vitatakse k�ik "
#~ "andmed,\n"
#~ "mis seal iganes leiduvad. Pange t�hele, et varem vormindatud ja "
#~ "vajalikke\n"
#~ "andmeid sisaldavaid partitsioone, t��piliselt /home ja /usr/local, ei "
#~ "ole\n"
#~ "m�istlik �le vormindada, vaid need v�ib j�tta nii nagu on."

#~ msgid ""
#~ "The packages selected are now being installed. This operation\n"
#~ "should take a few minutes unless you have chosen to upgrade an\n"
#~ "existing system, in that case it can take more time even before\n"
#~ "upgrade starts."
#~ msgstr ""
#~ "N��d hakkan Teie valitud pakette installima. Selleks peaks kuluma\n"
#~ "m�nik�mmend minutit. S�steemi uuendamisel kulub aega k�ll veidi rohkem,\n"
#~ "sest siis tuleb enne olemasolevaid pakette anal��sida."

#~ msgid ""
#~ "If DrakX failed to find your mouse, or if you want to\n"
#~ "check what it has done, you will be presented the list of mice\n"
#~ "above.\n"
#~ "\n"
#~ "\n"
#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
#~ "Otherwise you may choose the mouse that more closely matches your own\n"
#~ "from the menu above.\n"
#~ "\n"
#~ "\n"
#~ "In case of a serial mouse, you will also have to tell DrakX\n"
#~ "which serial port it is connected to."
#~ msgstr ""
#~ "Kui DrakX ei suutnud Teie hiirt tuvastada, v�i soovite vaadata, mida\n"
#~ "leiti, kuvatakse Teile �lalpool \"hiiret�ugude\" nimekiri.\n"
#~ "\n"
#~ "\n"
#~ "Kui olete valikuga n�us, minge lihtsalt vasakpoolses men��s edasi.\n"
#~ "Vastasel juhul valige hiire t��p, mis Teie arvates k�ige paremini Teie\n"
#~ "hiirt iseloomustab\n"
#~ "\n"
#~ "\n"
#~ "Kui tegemist on seerialpordi hiirega, peate �tlema ka, mis porti ta on\n"
#~ "�hendatud."

#~ msgid ""
#~ "This section is dedicated to configuring a local area\n"
#~ "network (LAN) or a modem.\n"
#~ "\n"
#~ "Choose \"Local LAN\" and DrakX will\n"
#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
#~ "should be found and initialized automatically.\n"
#~ "However, if your peripheral is ISA, autodetection will not work,\n"
#~ "and you will have to choose a driver from the list that will appear "
#~ "then.\n"
#~ "\n"
#~ "\n"
#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
#~ "in the first time, otherwise you will have to specify the options\n"
#~ "to the driver that you will have fetched from documentation of your\n"
#~ "hardware.\n"
#~ "\n"
#~ "\n"
#~ "If you install a Mandrake Linux system on a machine which is part\n"
#~ "of an already existing network, the network administrator will\n"
#~ "have given you all necessary information (IP address, network\n"
#~ "submask or netmask for short, and hostname). If you're setting\n"
#~ "up a private network at home for example, you should choose\n"
#~ "addresses.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
#~ "a modem will be configured. DrakX will try to find your modem,\n"
#~ "if it fails you will have to select the right serial port where\n"
#~ "your modem is connected to."
#~ msgstr ""
#~ "See sektsioon on p�hendatud kohtv�rgu (LAN) v�i sissehelistamisteenuse\n"
#~ "(DialUp) s�tete paikapanemisele.\n"
#~ "\n"
#~ "Kui vastate \"LAN\", siis proovitakse Teie arvutist leida v�rgukaarti.\n"
#~ "Kui Teie v�rgukaart t��tab PCI siinil, peaks ta olema leitav ja "
#~ "kasutatav\n"
#~ "automaatselt. ISA kaardi puhul, v�ib automaatne otsing alt vedada ja Te\n"
#~ "peate juhtprogrammi ise nimekirjast valima.\n"
#~ "\n"
#~ "\n"
#~ "SCSI kaartide puhul peab juhtprogramm esmalt leidma SCSI liidese, "
#~ "vastasel\n"
#~ "juhul peate p��rduma kaardi m��ja poole.\n"
#~ "\n"
#~ "\n"
#~ "Kui installite Mandrake Linux s�steemi masinale, mis on osake juba "
#~ "t��tavast\n"
#~ "kohtv�rgust, annab v�rgu haldaja Teile kogu vajaliku informatsiooni (IP-\n"
#~ "aadressi, alamv�rgu maski ja masina nime). Kui seate �les oma privaatset\n"
#~ "v�rku, peaksite ise valima aadressid \n"
#~ "\n"
#~ "Kui soovite Internetti kasutada modemi ja sissehelistamisteenuse kaudu,\n"
#~ "valige \"DialUp\" ja DrakX proovib otsida Teie arvutist modemit. Kui\n"
#~ "modemit ei leita, peate sisestama seerialpordi, kuhu kavatsete modemi\n"
#~ "�hendada."

#~ msgid ""
#~ "GNU/Linux can deal with many types of printer. Each of these\n"
#~ "types require a different setup. Note however that the print\n"
#~ "spooler uses 'lp' as the default printer name; so you\n"
#~ "must have one printer with such a name; but you can give\n"
#~ "several names, separated by '|' characters, to a printer.\n"
#~ "So, if you prefer to have a more meaningful name you just have\n"
#~ "to put it first, eg: \"My Printer|lp\".\n"
#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
#~ "\n"
#~ "\n"
#~ "If your printer is physically connected to your computer, select\n"
#~ "\"Local printer\". You will then have to tell which port your\n"
#~ "printer is connected to, and select the appropriate filter.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a printer located on a remote Unix machine,\n"
#~ "you will have to select \"Remote lpd\". In order to make\n"
#~ "it work, no username or password is required, but you will need\n"
#~ "to know the name of the printing queue on this server.\n"
#~ "\n"
#~ "\n"
#~ "If you want to access a SMB printer (which means, a printer located\n"
#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
#~ "plus the username, workgroup and password required in order to\n"
#~ "access the printer, and of course the name of the printer. The same goes\n"
#~ "for a NetWare printer, except that you need no workgroup information."
#~ msgstr ""
#~ "Linuxi all saate kasutada mitmesuguseid printereid. Iga�ks neist n�uab\n"
#~ "erinevaid s�tteid t��tamiseks. Siiski tasub t�hele panna, et s�steem\n"
#~ "kasutab nime 'lp' vaikimisi printeri jaoks; seega peab Teil �ks \n"
#~ "selliselt t�histatud, kuigi printeri(te)le v�ib panna '|' m�rgiga "
#~ "eraldatult\n"
#~ "mitu nime. Kui eelistate \"t�hendusega\" nimesid, pange nimeks\n"
#~ "n�iteks \"Minu printer|lp\" ja see saab olema Teie vaikimisi printer.\n"
#~ "\n"
#~ "Kui Teie printer on otse arvuti k�lge �hendatud, valige \"Kohalik printer"
#~ "\".\n"
#~ "Siis saate valida pordi kuhu see on �hendatud ja printerile vastava "
#~ "filtri.\n"
#~ "\n"
#~ "\n"
#~ "Kui soovite kasutada printerit, mis on �hendatud Un*x serveriga, peate\n"
#~ "Valima \"lpd v�rguprinter\". Niisugusel juhul ei vaja Te kasutajatunnust\n"
#~ "ega salas�na, vaid ainult serveri nime ja printimisj�rje nime serveril.\n"
#~ "\n"
#~ "\n"
#~ "Kui soovite kasutada SMB printserverit (st. printerit, mida jagab v�lja\n"
#~ "Windows 9x/NT, peate �ra n�itama serveri SMB nime (mis ei pea olema sama\n"
#~ "TCP/IP nimega) ja kindluse m�ttes ka IP-aadressi. Loomulikult on vaja "
#~ "teada\n"
#~ "ka serveri poolt jagatava printeri nime ning kasutajatunnust, salas�na "
#~ "ja\n"
#~ "t��grupi nime. Sama, v�lja arvatud t��grupp, on vaja teada ka NetWare\n"
#~ "printserveri kasutamise korral."

#~ msgid ""
#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
#~ "boot into GNU/Linux any more."
#~ msgstr ""
#~ "On ��rmiselt soovitatav vastata siin \"Jah\"! N�iteks, kui installite\n"
#~ "samasse masinasse hiljem MS Windowsi, kirjutab see �le bootsektori.\n"
#~ "Ilma alglaadimisflopita ei ole Teil siis enam v�imalik GNU/Linuxit\n"
#~ "laadida."

#~ msgid "Move your wheel!"
#~ msgstr "Liigutage ratast!"

#~ msgid "Forget the changes?"
#~ msgstr "Muutusi ei teinudki?"

#~ msgid "What is the type of your mouse?"
#~ msgstr "Mis t��pi hiirt kasutate?"

#~ msgid "Automatic resolutions"
#~ msgstr "V�ljapakutavad kuvatihedused"

#~ msgid ""
#~ "To find the available resolutions I will try different ones.\n"
#~ "Your screen will blink...\n"
#~ "You can switch if off if you want, you'll hear a beep when it's over"
#~ msgstr ""
#~ "Et leida v�imalikke kuvatihedusi, testin erinevaid variante.\n"
#~ "Ekraan Teie ees hakkab vilkuma...\n"
#~ "Kui soovite, l�litage monitor v�lja. Kui valmis saan, kostab piiks"

#~ msgid ""
#~ "I can try to find the available resolutions (eg: 800x600).\n"
#~ "Sometimes, though, it may hang the machine.\n"
#~ "Do you want to try?"
#~ msgstr ""
#~ "Me v�ime proovida leida kuvatihedust, n�iteks 800x600.\n"
#~ "Siiski, vahel ajab see arvuti segadusse.\n"
#~ "Soovite proovida?"

#~ msgid ""
#~ "No valid modes found\n"
#~ "Try with another video card or monitor"
#~ msgstr ""
#~ "Sobivat olekut ei leitud\n"
#~ "Proovige palun muud graafikakaarti v�i monitori"

#~ msgid "Automatical resolutions search"
#~ msgstr "Automaatne kuvatiheduste otsing"

#~ msgid "pump"
#~ msgstr "pump"

#~ msgid "dhcpxd"
#~ msgstr "dhcpxd"

#~ msgid "dhcp-client"
#~ msgstr "dhcp-client"

#~ msgid "Apple ADB Mouse"
#~ msgstr "Apple ADB hiir"

#~ msgid "Apple ADB Mouse (2 Buttons)"
#~ msgstr "Apple ADB hiir (2 nuppu)"

#~ msgid "Apple ADB Mouse (3+ Buttons)"
#~ msgstr "Apple ADB hiir (3+ nuppu)"

#~ msgid "Apple USB Mouse"
#~ msgstr "Apple USB hiir"

#~ msgid "Apple USB Mouse (2 Buttons)"
#~ msgstr "Apple USB hiir (2 nuppu)"

#~ msgid "Apple USB Mouse (3+ Buttons)"
#~ msgstr "Apple USB hiir (3+ nuppu)"

#~ msgid "ASCII MieMouse"
#~ msgstr "ASCII MieMouse"

#~ msgid "Genius NetMouse Pro"
#~ msgstr "Genius NetMouse Pro"

#~ msgid "ATI Bus Mouse"
#~ msgstr "ATI Bus hiir"

#~ msgid "Microsoft Bus Mouse"
#~ msgstr "Microsoft Bus hiir"

#~ msgid "Logitech Bus Mouse"
#~ msgstr "Logitech Bus hiir"

#~ msgid "USB Mouse (3 buttons or more)"
#~ msgstr "USB hiir (3 v�i enam nuppu)"

#~ msgid "Microsoft Rev 2.1A or higher (serial)"
#~ msgstr "Microsoft Rev 2.1A v�i k�rgem (seerial)"

#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
#~ msgstr "Logitech MouseMan+/FirstMouse+ (seerial)"

#~ msgid "ASCII MieMouse (serial)"
#~ msgstr "ASCII MieMouse (seerial)"

#~ msgid "Genius NetMouse (serial)"
#~ msgstr "Genius NetMouse (seerial)"

#~ msgid "Generic Mouse (serial)"
#~ msgstr "Lihtsalt hiir (seerial)"

#~ msgid "Microsoft compatible (serial)"
#~ msgstr "Microsofti �hilduv (seerial)"

#~ msgid "Generic 3 Button Mouse (serial)"
#~ msgstr "Lihtsalt 3-nupuline hiir (seerial)"

#~ msgid "Kensington Thinking Mouse (serial)"
#~ msgstr "Kensington Thinking Mouse (seerial)"

#~ msgid ""
#~ "I need to configure your network adapter to be able to connect to "
#~ "internet."
#~ msgstr "Interneti�henduse jaoks on vaja seadistada v�rguliides."

#~ msgid ""
#~ "Please choose which network adapter do you want to use to connect to "
#~ "internet.\n"
#~ "If you don't know, choose eth0.\n"
#~ msgstr ""
#~ "Palun valige millist v�rguliidest soovite kasutada kohtv�rgu\n"
#~ "jaoks.\n"
#~ "Kui Te ei tea, valige eth0.\n"

#~ msgid "nfs mount failed"
#~ msgstr "NFS �hendamine eba�nnestus"

#~ msgid "Socket"
#~ msgstr "Pistik"

#~ msgid ""
#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
#~ "By default, the 4.0 server is used unless your card is not supported.\n"
#~ "\n"
#~ "Do you want to keep XFree 3.3?"
#~ msgstr ""
#~ "DrakX saab luua s�ttefailid nii XFree 3.3 kui ka XFree 4.0. \n"
#~ "Vaikimisi kasutatakse 4.0, kui see toetab Teie riistvara\n"
#~ "\n"
#~ "Kas soovite j��da XFree versiooni 3.3 juurde?"

#~ msgid "Cryptographic"
#~ msgstr "Kr�pto"

#~ msgid "Configure LAN"
#~ msgstr "Seadista X"

#~ msgid "End configuration"
#~ msgstr "ISDN s�tted"

#~ msgid "Do not set up networking"
#~ msgstr "Ei seadista v�rku"

#~ msgid "Do you want to configure a local network for your system?"
#~ msgstr "Kas soovite kasutada kohtv�rku?"

#~ msgid "Show less"
#~ msgstr "N�ita v�hem"

#~ msgid "Show more"
#~ msgstr "N�ita rohkem"

#~ msgid "Take over the hard drive"
#~ msgstr "Kasuta kogu ketast"

#~ msgid "URI for Local printer"
#~ msgstr "Kohalik printer"

#~ msgid "URI for Network printer"
#~ msgstr "V�rguliides"

#~ msgid "Local Printer Device (URI)"
#~ msgstr "Otse �hendatud printer"

#~ msgid ""
#~ "What URI device is your printer connected to\n"
#~ "(nte that parallel:/dev/lp0 is equivalent to LPT1:)?"
#~ msgstr ""
#~ "Mis porti on Teie printer �hendatud? \n"
#~ "(paneme t�hele, et /dev/lp0 on sama mis LPT1:)?"

#~ msgid "tie"
#~ msgstr "pintsaklips"

#~ msgid "brunette"
#~ msgstr "br�nett"

#~ msgid "girl"
#~ msgstr "neiu"

#~ msgid "woman-blond"
#~ msgstr "blondiin"

#~ msgid "automagic"
#~ msgstr "automaagiline"

#~ msgid "Have you been provided with a hostname?"
#~ msgstr "Anti Teile masinanimi"

#~ msgid "Local Area Network specification"
#~ msgstr "Kohtv�rgu seaded"

#~ msgid "You may now decide which class C network to use.\n"
#~ msgstr "Millist C-klassi v�rku soovite kasutada.\n"

#~ msgid "Network:"
#~ msgstr "V�rgu mask:"

#~ msgid "Internet Connection Sharing - setup of %s"
#~ msgstr "Interneti�henduse jagamine - liides %s"

#~ msgid ""
#~ "The following interface is about to be configured:\n"
#~ "\n"
#~ "%s\n"
#~ "\n"
#~ msgstr ""
#~ "Seatakse s�tted j�rgmisele v�rguliidesele:\n"
#~ "\n"
#~ "%s\n"
#~ "\n"

#
#~ msgid "Everything configured!"
#~ msgstr "K�ik seadistatud!"

#~ msgid "What is your keyboard layout?"
#~ msgstr "Milline on Teie klaviatuuriasetus"

#~ msgid ""
#~ "\n"
#~ "I recommend that you abort, and then launch this internet wizard after "
#~ "installation.It will then be able to setup ISA or PCMCIA cards easier.\n"
#~ "\n"
#~ "But, if you know the irq, dma, io of your card, you can still configure "
#~ "your card."
#~ msgstr ""
#~ "\n"
#~ "Soovitan teil praegu katkestada ja k�ivitada v�rgu�henduse abimees p�rast "
#~ "installimist uuesti. Siis on v�imalik Teie ISA v�i PCMCIA kaarte lihtsam\n"
#~ "seadistada\n"
#~ "Muidugi, kui teil on teada oma kaardi IRQ, DMA ja IO, ei ole probleemi."

#~ msgid "pptp alcatel"
#~ msgstr "Paiguta ise"

#~ msgid "Try to find PCMCIA cards?"
#~ msgstr "Kas otsida PCMCIA kaarte?"

#~ msgid "Try to find %s devices?"
#~ msgstr "Kas otsida %s seadmeid?"

#~ msgid "Small(%dMB)"
#~ msgstr "V�ike (%d MB)"

#~ msgid ""
#~ "Do you want to configure a dialup connection with modem for your system?"
#~ msgstr "Kas soovite kasutada DialUp �hendust modemi kaudu?"

#~ msgid "Do you want to configure a ISDN connection for your system?"
#~ msgstr "Kas soovite kasutada ISDN �hendust?"

#~ msgid "Try to find PCI devices?"
#~ msgstr "Kas otsida PCI seadmeid?"

#~ msgid "Searching root partition."
#~ msgstr "Otsin juurpartitsiooni.."

#~ msgid "%s: This is not a root partition, please select another one."
#~ msgstr "%s: See ei ole juurpartitsioon, palun valige m�ni muu."

#~ msgid "Please choose a partition to use as your root partition."
#~ msgstr "Millist partitsiooni soovite kasutada juurkataloogi jaoks?"

#~ msgid "Autologin at startup"
#~ msgstr "X stardib n��d"

#~ msgid "Autologin - Choose default user"
#~ msgstr "Valige uus suurus"

#~ msgid "You don't have any windows partitions!"
#~ msgstr "Teil ei ole �htki Windowsi partitsiooni!"

#~ msgid "You don't have any enough room for Lnx4win"
#~ msgstr "Teil ei ole piisavalt ruumi Lnx4win jaoks"

#~ msgid ", %U MB"
#~ msgstr ", %U MB"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
#~ msgid ""
#~ "Welcome to LILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
#~ "for default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Tere tulemast! Laadimisel aitab Teid LILO!\n"
#~ "\n"
#~ "Valikud kuvab <Tab>.\n"
#~ "\n"
#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
#~ "vaikimisi oodake %d sekundit.\n"

# NOTE: this message will be displayed by SILO at boot time; that is
# only the ascii charset will be available
# so use only 7bit for this message
#
#~ msgid ""
#~ "Welcome to SILO the operating system chooser!\n"
#~ "\n"
#~ "To list the possible choices, press <TAB>.\n"
#~ "\n"
#~ "To load one of them, write its name and press <ENTER> or\n"
#~ "wait %d seconds for default boot.\n"
#~ "\n"
#~ msgstr ""
#~ "Tere tulemast! Laadimisel aitab Teid SILO!\n"
#~ "\n"
#~ "Valikud kuvab <Tab>.\n"
#~ "\n"
#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
#~ "vaikimisi oodake %d sekundit.\n"

#~ msgid "SILO main options"
#~ msgstr "SILO peas�tted"

#~ msgid ""
#~ "Here are the following entries in SILO.\n"
#~ "You can add some more or change the existing ones."
#~ msgstr ""
#~ "Praegu on SILO jaoks kirjeldatud alltoodud kirjed.\n"
#~ "Te v�ite neid lisada ning olemasolevaid muuta."

#~ msgid "This label is already in use"
#~ msgstr "Selline t�his on juba kasutusel"

#~ msgid "Installation of SILO failed. The following error occured:"
#~ msgstr "SILO installimine eba�nnestus. Tekkis j�rgnev viga:"

#~ msgid ""
#~ "DrakX will attempt at first to look for one or more PCI\n"
#~ "SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
#~ "to use, it will insert it (them)  automatically.\n"
#~ "\n"
#~ "\n"
#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
#~ "doesn't know which driver to use for this card, or if you have no\n"
#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
#~ "will have to select one.\n"
#~ "\n"
#~ "\n"
#~ "After you have selected the driver, DrakX will ask if you\n"
#~ "want to specify options for it. First, try and let the driver\n"
#~ "probe for the hardware: it usually works fine.\n"
#~ "\n"
#~ "\n"
#~ "If not, do not forget the information on your hardware that you\n"
#~ "could get from your documentation or from Windows (if you have it\n"
#~ "on your system), as suggested by the installation guide. These\n"
#~ "are the options you will need to provide to the driver."
#~ msgstr ""
#~ "DrakX proovib esmalt leida Teie s�steemist SCSI liideseid PCI siinil.\n"
#~ "Kui neid leitakse, ja vastav juhtprogramm on teada, siis laetakse\n"
#~ "see m�llu automaatselt.\n"
#~ "\n"
#~ "\n"
#~ "Kui Teie SCSI liides kasutab ISA siini v�i kui DrakX ei tea,\n"
#~ "millist juhtprogrammi kasutada v�i Teil ei ole �ldse SCSI liidest,\n"
#~ "siis k�sitakse Teilt selle kohta.\n"
#~ "Kui Teil SCSI liidest t�esti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
#~ "on, siis vastake \"Jah\". Seej�rel lastakse Teil nimekirjast sobiv\n"
#~ "juhtprogramm valida.\n"
#~ "\n"
#~ "\n"
#~ "Kui olete juhtprogrammi v�lja valinud, on Teil v�imalus anda sellele\n"
#~ "ka parameetreid. Siiski, enamasti l�heb k�ik kenasti ka ilma neid\n"
#~ "sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
#~ "\n"
#~ "\n"
#~ "Kui automaatne parameetrite otsimine ei t��ta, p��rduge palun\n"
#~ "oma SCSI liidese dokumentatsiooni poole. Ka samas masinas olev Windows\n"
#~ "oskab vahel SCSI kohta vajalikku informatsiooni anda."

#~ msgid "Shutting down"
#~ msgstr "Sulgemine"

#~ msgid "useless"
#~ msgstr "kasutu"

#~ msgid ""
#~ "Some true type fonts from windows have been found on your computer.\n"
#~ "Do you want to use them? Be sure you have the right to use them under "
#~ "Linux."
#~ msgstr ""
#~ "Teie arvutist m�ned hulk Windowsi TrueType fondid.\n"
#~ "Soovite Te neid ka Linuxis kasutada (eeldusel, et Teil on need legaalsed)?"

#~ msgid ""
#~ "Choose \"Install\" if there are no previous versions of Linux\n"
#~ "installed, or if you wish to use multiple distributions or versions.\n"
#~ "\n"
#~ "\n"
#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
#~ "Linux:\n"
#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
#~ "2000\n"
#~ "or 7.0 (Air)."
#~ msgstr ""
#~ "Valige \"Installimine\" kui varem sellele masinale Linuxit ei ole pandud\n"
#~ "v�i soovite kasutada mitut distributsiooni\n"
#~ "\n"
#~ "\n"
#~ "Valige \"Uuendamine\" kui soovite uuendada m�nd eelmist Mandrake "
#~ "Linuxit:\n"
#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
#~ "Gold 2000 v�i 7.0 (Air)."

#~ msgid "Creating and formatting loopback file %s"
#~ msgstr "Loon ja vormindan loopback faili %s"

#~ msgid "Do you want to use LILO?"
#~ msgstr "Soovite LILO-t kasutada?"

#~ msgid ""
#~ "You may now select the packages you wish to install.\n"
#~ "\n"
#~ "\n"
#~ "First you can select group of package to install or upgrade. After that\n"
#~ "you can select more packages according to the total size you wish to\n"
#~ "select.\n"
#~ "\n"
#~ "\n"
#~ "If you are in expert mode, you can select packages individually.\n"
#~ "Please note that some packages require the installation of others.\n"
#~ "These are referred to as package dependencies. The packages you select,\n"
#~ "and the packages they require will be automatically selected for\n"
#~ "install. It is impossible to install a package without installing all\n"
#~ "of its dependencies."
#~ msgstr ""
#~ "N��d v�ite valida paketigrupi, mida soovite installida v�i uuendada.\n"
#~ "Soovi korral saate valida pakette ka lisaks vastavalt oma �ran�gemisele\n"
#~ "\n"
#~ "\n"
#~ "Kui olete valinud paigaldusviisi \"Ekspert\", saate pakette �kshaaval\n"
#~ "T�helepanu! M�ned paketid v�ivad n�uda, et oleks installitud ka m�ned\n"
#~ "teised. Neid nimetatakse paketi s�ltuvusteks. Paketi valimisel valitakse\n"
#~ "automaatselt ka k�ik tema s�ltuvused. Paketi installimine ilma k�iki\n"
#~ "s�ltuvusi rahuldamata, on v�imatu."

#~ msgid ""
#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
#~ "Normally they are correctly detected during installation. If you don't\n"
#~ "see yours detected, you can add one or more now.\n"
#~ "\n"
#~ "\n"
#~ "If you don't want that everybody could access at one of them, you can "
#~ "remove\n"
#~ "it now (a boot disk will be needed to boot it)."
#~ msgstr ""
#~ "LILO (LInux LOader) oskab laadida erinevaid Teie arvuti leiduvaid\n"
#~ "operatsioonis�steeme. Tavaliselt tuvastatakse need installimise k�igus.\n"
#~ "Kui Te ei n�e neid tuvastatuna, saate need n��d lisada.\n"
#~ "\n"
#~ "\n"
#~ "Kui Te ei soovi m�nd neist laadida, v�ite selle kohe eemaldada. Sellisel\n"
#~ "juhul vajate selle laadimiseks vastavat alglaadimisflopit."

#~ msgid "Choose other CD to install"
#~ msgstr "Pakettide valik"

#~ msgid ""
#~ "Select:\n"
#~ "\n"
#~ "  - Recommended: If you have never installed Linux before.\n"
#~ "\n"
#~ "\n"
#~ "  - Customized: If you are familiar with Linux, you will be able to \n"
#~ "select the usage for the installed system between normal, development or\n"
#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
#~ "computer. You may choose \"Development\" if you will be using the "
#~ "computer\n"
#~ "primarily for software development, or choose \"Server\" if you wish to\n"
#~ "install a general purpose server (for mail, printing...).\n"
#~ "\n"
#~ "\n"
#~ "  - Expert: If you are fluent with GNU/Linux and want to perform\n"
#~ "a highly customized installation, this Install Class is for you. You "
#~ "will\n"
#~ "be able to select the usage of your installed system as for \"Customized"
#~ "\"."
#~ msgstr ""
#~ "Valige:\n"
#~ "\n"
#~ "  - Soovitatav: Te pole kunagi varem Linuxit installinud.\n"
#~ "\n"
#~ "\n"
#~ "  - Oma segu: Olete Linuxiga tuttav ja soovite s�steemi kohandada "
#~ "vastavalt\n"
#~ "Teie vajadustele. J�rgmisena saate teha valikud \"T��jaam\", \"Arendus\"\n"
#~ "ja \"Server\", s�ltuvalt Teie arvuti edaspidisest kasutusalast.\n"
#~ "\n"
#~ "\n"
#~ "  - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
#~ "s�steemi, mis sobiks nagu valatult Teie t�psete ootustege."

#~ msgid "Downloading cryptographic packages"
#~ msgstr "Laadime kr�ptopakette"

#~ msgid "Setup SCSI"
#~ msgstr "SCSI seadistamine"

#~ msgid "Which packages do you want to install"
#~ msgstr "Valige paketid mida soovite installida"

#~ msgid "Local LAN"
#~ msgstr "LAN"

#~ msgid "expert"
#~ msgstr "ekspert"

#~ msgid "developer"
#~ msgstr "arendaja"

#~ msgid "beginner"
#~ msgstr "algaja"

#~ msgid "Linear (needed for some SCSI drives)"
#~ msgstr "lineaarne (vajalik m�nedel SCSI ketastel)"

#~ msgid "linear"
#~ msgstr "linearne"

#~ msgid "After %s partition %s,"
#~ msgstr "P�rast %s partitsioneeri %s,"

#~ msgid "changing type of"
#~ msgstr "t��bi muutmine"

#~ msgid "formatting"
#~ msgstr "vormindatakse"

#~ msgid "resizing"
#~ msgstr "suuruse muutumine"

#~ msgid "Size: %s MB"
#~ msgstr "Suurus: %s MB"

#~ msgid "Bad kickstart file %s (failed %s)"
#~ msgstr "Loetamatu kickstart fail %s (%s viga)"

#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
#~ msgstr "Valitud on liiga palju pakette: %dMB ei mahu %dMB-le"

#~ msgid "Going to install %d MB. You can choose to install more programs"
#~ msgstr "Paigalduseks valitud %d MB. V�ite veel programme juurde valida"

#~ msgid "Enter a floppy (all data will be lost)"
#~ msgstr "Pange t�hi flopi masinasse (andmed sellel h�vivad)"

#~ msgid "Password:"
#~ msgstr "Salas�na:"

#~ msgid "User name:"
#~ msgstr "Kasutajatunnus:"

#~ msgid ""
#~ "Failed to create an HTP boot floppy.\n"
#~ "You may have to restart installation and give ``%s'' at the prompt"
#~ msgstr ""
#~ "HTP alglaadimisketta loomine eba�nnestus.\n"
#~ "Taasalustage installimist, andes parameetriks ``%s''"

#~ msgid "It is necessary to restart installation with the new parameters"
#~ msgstr "Peate taasalustama installimist uute parameetritega"

#~ msgid "It is necessary to restart installation booting on the floppy"
#~ msgstr "Peate taasalustama installimist, laadides flopikettalt"

#~ msgid ""
#~ "Enter a floppy to create an HTP enabled boot\n"
#~ "(all data on floppy will be lost)"
#~ msgstr ""
#~ "Sisesta flopi HTP alglaadimisketta loomiseks\n"
#~ "(k�ik andmed flopil h�vivad)"

#~ msgid "A entry %s already exists"
#~ msgstr "Kirje %s on juba olemas"

#~ msgid "Choose install or upgrade"
#~ msgstr "Paigaldus v�i uuendamine"

#~ msgid "What usage do you want?"
#~ msgstr "Mis kasutusala soovite?"