# SOME DESCRIPTIVE TITLE.
# Copyright (C) 1999 Free Software Foundation, Inc.
# Copyright (c) 1999 MandrakeSoft
# D. Dale Gulledge <dsplat@rochester.rr.com>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2000-01-09 21:03+0100\n"
"PO-Revision-Date: 2000-01-05 07:18-0500\n"
"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
"Language-Team: Esperanto <eo@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-3\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../Xconfigurator.pm_.c:159
msgid "Graphic card"
msgstr "Grafika karto"

#: ../Xconfigurator.pm_.c:159
msgid "Select a graphic card"
msgstr "Elektu grafikan karton"

#: ../Xconfigurator.pm_.c:160
msgid "Choose a X server"
msgstr "Elektu X servilon"

#: ../Xconfigurator.pm_.c:160
msgid "X server"
msgstr "X servilo"

#: ../Xconfigurator.pm_.c:181
msgid "Select the memory size of your graphic card"
msgstr "Elektu memorkapaciton de via grafika karto"

#: ../Xconfigurator.pm_.c:203
msgid "Choose options for server"
msgstr "Elektu opciojn por servilo"

#: ../Xconfigurator.pm_.c:221
msgid "Choose a monitor"
msgstr "Elektu ekranon"

#: ../Xconfigurator.pm_.c:221
msgid "Monitor"
msgstr "Ekrano"

#: ../Xconfigurator.pm_.c:224
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"La du gravegaj parametroj estas la vertikala refre�igrapido (vertical\n"
"refresh rate) kiu estas la rapido por refre�igi la tutan ekranon, kaj\n"
"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
"la rapido por montri skanliniojn.\n"
"\n"
"�i estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."

#: ../Xconfigurator.pm_.c:231
msgid "Horizontal refresh rate"
msgstr "Horizontala sinkronrapido (horizontal sync rate)"

#: ../Xconfigurator.pm_.c:231
msgid "Vertical refresh rate"
msgstr "Vertikala refre�igrapido (vertical refresh rate)"

#: ../Xconfigurator.pm_.c:272
msgid "Monitor not configured"
msgstr "Ekrano ne estas konfigurata"

#: ../Xconfigurator.pm_.c:275
msgid "Graphic card not configured yet"
msgstr "Grafika karto ne jam konfigurita"

#: ../Xconfigurator.pm_.c:278
msgid "Resolutions not chosen yet"
msgstr "Vi ne jam elektas distingivojn"

#: ../Xconfigurator.pm_.c:289
msgid "Do you want to test the configuration?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../Xconfigurator.pm_.c:293
msgid "Warning: testing is dangerous on this graphic card"
msgstr "Averto: provado estas dan�era je �i tiu grafika karto"

#: ../Xconfigurator.pm_.c:296
msgid "Test configuration"
msgstr "Provu konfigura�on"

#: ../Xconfigurator.pm_.c:334
msgid "An error occurred:"
msgstr "Eraro okazis:"

#: ../Xconfigurator.pm_.c:336
msgid ""
"\n"
"try changing some parameters"
msgstr ""
"\n"
"penu �an�i iom da parametroj"

#: ../Xconfigurator.pm_.c:358
#, c-format
msgid "(leaving in %d seconds)"
msgstr "(mi eliros post %d sekundoj)"

#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425
msgid "Is this correct?"
msgstr "�u tio �i pravas?"

#: ../Xconfigurator.pm_.c:370
msgid "An error occurred, try changing some parameters"
msgstr "Eraro okazis, penu �an�i iom da parametroj"

#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547
msgid "Automatic resolutions"
msgstr "A�tomataj distingivoj"

#: ../Xconfigurator.pm_.c:379
msgid ""
"To find the available resolutions I will try different ones.\n"
"Your screen will blink...\n"
"You can switch if off if you want, you'll hear a beep when it's over"
msgstr ""
"Por trovi haveblajn distingivojn, mi provos diversajn.\n"
"Via ekrano flagros...\n"
"Vi povas mal�alti �in se vi deziras; vi a�dos pepon kiam �i fini�os."

#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208
msgid "Resolution"
msgstr "Distingivo"

#: ../Xconfigurator.pm_.c:469
msgid "Choose resolution and color depth"
msgstr "Elektu distingivon kaj kolorprofundon"

#: ../Xconfigurator.pm_.c:477
msgid "Show all"
msgstr "Montru tuton"

#: ../Xconfigurator.pm_.c:501
msgid "Resolutions"
msgstr "Distingivoj"

#: ../Xconfigurator.pm_.c:548
msgid ""
"I can try to find the available resolutions (eg: 800x600).\n"
"Sometimes, though, it may hang the machine.\n"
"Do you want to try?"
msgstr ""
"Mi povas provi trovi la haveblajn distingivojn (ekz-e, 800x600).\n"
"Tamen, iam tio eble svenos la komputilon.\n"
"�u vi deziras provi?"

#: ../Xconfigurator.pm_.c:553
msgid ""
"No valid modes found\n"
"Try with another video card or monitor"
msgstr ""
"Neniuj validaj distingivoj trovataj.\n"
"Provu kun alia grafika karto a� ekrano."

#: ../Xconfigurator.pm_.c:772
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Klavara aran�o: %s\n"

#: ../Xconfigurator.pm_.c:773
#, c-format
msgid "Mouse type: %s\n"
msgstr "Speco de muso: %s\n"

#: ../Xconfigurator.pm_.c:774
#, c-format
msgid "Mouse device: %s\n"
msgstr "Musaparato: %s\n"

#: ../Xconfigurator.pm_.c:775
#, c-format
msgid "Monitor: %s\n"
msgstr "Ekrano: %s\n"

#: ../Xconfigurator.pm_.c:776
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"

#: ../Xconfigurator.pm_.c:777
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Ekrana vertikala refre�igrapido (vertical refresh rate): %s\n"

#: ../Xconfigurator.pm_.c:778
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafika karto: %s\n"

#: ../Xconfigurator.pm_.c:779
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Graifka memoro: %s kb.\n"

#: ../Xconfigurator.pm_.c:780
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 servilo: %s\n"

#: ../Xconfigurator.pm_.c:794
msgid "Preparing X-Window configuration"
msgstr "Preparas X-Fenestran konfigura�on"

#: ../Xconfigurator.pm_.c:808
msgid "Change Monitor"
msgstr "�an�u Ekranon"

#: ../Xconfigurator.pm_.c:809
msgid "Change Graphic card"
msgstr "�an�u Grafika karto"

#: ../Xconfigurator.pm_.c:810
msgid "Change Server options"
msgstr "�an�u Servilajn opciojn"

#: ../Xconfigurator.pm_.c:811
msgid "Change Resolution"
msgstr "�an�u distingivon"

#: ../Xconfigurator.pm_.c:812
msgid "Automatical resolutions search"
msgstr "A�tomata ser�o por distingivoj"

#: ../Xconfigurator.pm_.c:816
msgid "Show information"
msgstr "Montru informon"

#: ../Xconfigurator.pm_.c:817
msgid "Test again"
msgstr "Provu denove"

#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46
msgid "Quit"
msgstr "�esu"

#: ../Xconfigurator.pm_.c:822
msgid "What do you want to do?"
msgstr "Kion vi deziras fari?"

#: ../Xconfigurator.pm_.c:829
msgid "Forget the changes?"
msgstr "�u mi devus forgesi la �an�ojn?"

#: ../Xconfigurator.pm_.c:845
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Bonvolu resaluti en %s-n por aktivigi la �an�ojn."

#: ../Xconfigurator.pm_.c:861
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""
"Bonvole adia�u kaj sekve uzu Kontrol-Alt-Retropa�o (Ctrl-Alt-Backspace)."

#: ../Xconfigurator.pm_.c:864
msgid "X at startup"
msgstr "X Fenestro �e komenco"

#: ../Xconfigurator.pm_.c:865
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"Mi povas konfiguri vian komputilon tiel ke �i a�tomate lan�os X kiam �i\n"
"ekfunkcias.  �u vi deziras ke X a�tomate lan�os?"

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors (8 bits)"
msgstr "256 koloroj (8 bitoj)"

#: ../Xconfigurator_consts.pm_.c:5
msgid "32 thousand colors (15 bits)"
msgstr "32 mil koloroj (15 bitoj)"

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors (16 bits)"
msgstr "65 mil koloroj (16 bitoj)"

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors (24 bits)"
msgstr "16 milionoj koloroj (24 bitoj)"

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors (32 bits)"
msgstr "4 miliardoj koloroj (32 bitoj)"

#: ../Xconfigurator_consts.pm_.c:96
msgid "256 kB"
msgstr "256 kb."

#: ../Xconfigurator_consts.pm_.c:97
msgid "512 kB"
msgstr "512 kb."

#: ../Xconfigurator_consts.pm_.c:98
msgid "1 MB"
msgstr "1 mb."

#: ../Xconfigurator_consts.pm_.c:99
msgid "2 MB"
msgstr "2 mb."

#: ../Xconfigurator_consts.pm_.c:100
msgid "4 MB"
msgstr "4 mb."

#: ../Xconfigurator_consts.pm_.c:101
msgid "8 MB"
msgstr "8 mb."

#: ../Xconfigurator_consts.pm_.c:102
msgid "16 MB or more"
msgstr "16 mb. a� pli"

#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Normala VGA, 640x480 �e 60 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:109
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Supera VGA, 800x600 �e 56 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:110
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr ""
"8514 kongrua karto, 1024x768 �e 87 hercoj (Hz) interplektita (neniu 800x600)"

#: ../Xconfigurator_consts.pm_.c:111
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr ""
"Supera VGA, 1024x768 �e 87 hercoj (Hz) interplektita, 800x600 �e 56 hercoj"

#: ../Xconfigurator_consts.pm_.c:112
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Etendita Supera VGA, 800x600 �e 60 hercoj (Hz), 640x480 �e 72 hercoj"

#: ../Xconfigurator_consts.pm_.c:113
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr ""
"Neinterplektita Supera VGA, 1024x768 �e 60 hercoj (Hz), 640x480 �e 72 hercoj"

#: ../Xconfigurator_consts.pm_.c:114
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "Altfrekvenca Supera VGA, 1024x768 �e 70 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:115
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Plurfrekvenca kiu povas fari 1024x768 �e 60 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:116
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Plurfrekvenca kiu povas fari 1280x1024 �e 74 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:117
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Plurfrekvenca kiu povas fari 1280x1024 �e 76 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:118
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Ekrano kiu povas fari 1600x1200 �e 70 hercoj (Hz)"

#: ../Xconfigurator_consts.pm_.c:119
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Ekrano kiu povas fari 1600x1200 �e 76 hercoj (Hz)"

#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
msgid "Create"
msgstr "Kreu"

#: ../diskdrake.pm_.c:17
msgid "Unmount"
msgstr "Malmuntu"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
msgid "Delete"
msgstr "Forigu"

#: ../diskdrake.pm_.c:18
msgid "Format"
msgstr "Formatu"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
msgid "Resize"
msgstr "Regrandecigu"

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
msgid "Type"
msgstr "Tipo"

#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
msgid "Mount point"
msgstr "Surmetingo"

#: ../diskdrake.pm_.c:33
msgid "Write /etc/fstab"
msgstr "Skribu /etc/fstab"

#: ../diskdrake.pm_.c:34
msgid "Toggle to expert mode"
msgstr "�an�u al Spertula re�imo"

#: ../diskdrake.pm_.c:35
msgid "Toggle to normal mode"
msgstr "�an�u al Normala re�imo"

#: ../diskdrake.pm_.c:36
msgid "Restore from file"
msgstr "Resta�ru de dosiero"

#: ../diskdrake.pm_.c:37
msgid "Save in file"
msgstr "Konservu en dosiero"

#: ../diskdrake.pm_.c:38
msgid "Restore from floppy"
msgstr "Resta�ru de disketo"

#: ../diskdrake.pm_.c:39
msgid "Save on floppy"
msgstr "Konservu sur disketo"

#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618
#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34
msgid "Done"
msgstr "Finata"

#: ../diskdrake.pm_.c:43
msgid "Clear all"
msgstr "Forvi�u �ion"

#: ../diskdrake.pm_.c:44
msgid "Format all"
msgstr "Formatu �ion"

#: ../diskdrake.pm_.c:45
msgid "Auto allocate"
msgstr "A�tomate disponigu"

#: ../diskdrake.pm_.c:48
msgid "All primary partitions are used"
msgstr "�iuj el la subdiskoj estas uzata"

#: ../diskdrake.pm_.c:48
msgid "I can't add any more partition"
msgstr "Mi ne povas aldoni plu da subdiskoj"

#: ../diskdrake.pm_.c:48
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
"subdiskon"

#: ../diskdrake.pm_.c:51
msgid "Rescue partition table"
msgstr "Sava subdiskotabelo"

#: ../diskdrake.pm_.c:52
msgid "Undo"
msgstr "Malfaru"

#: ../diskdrake.pm_.c:53
msgid "Write partition table"
msgstr "Skribu subdiskotabelon"

#: ../diskdrake.pm_.c:54
msgid "Reload"
msgstr "Re�argu"

#: ../diskdrake.pm_.c:98
msgid "Empty"
msgstr "Malplena"

#: ../diskdrake.pm_.c:98
msgid "Ext2"
msgstr "2a Etendata (Ext2)"

#: ../diskdrake.pm_.c:98
msgid "FAT"
msgstr "Dosierlokigtabelo (FAT)"

#: ../diskdrake.pm_.c:98
msgid "Other"
msgstr "Alia"

#: ../diskdrake.pm_.c:98
msgid "Swap"
msgstr "Inter�an�a"

#: ../diskdrake.pm_.c:104
msgid "Filesystem types:"
msgstr "Specoj de dosiersistemoj:"

#: ../diskdrake.pm_.c:113
msgid "Details"
msgstr "Detaloj"

#: ../diskdrake.pm_.c:127
msgid ""
"You have one big fat partition\n"
"(generally use by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vi havas unu grandan dikan subdiskon.\n"
"(�enerale uzata de MicroSoft DOS/Windows).\n"
"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
"(klaku sur �in, kaj poste klaku sur \"Regrandecigu\")"

#: ../diskdrake.pm_.c:132
msgid "Please make a backup of your data first"
msgstr "Bonvolu fari rezervan kopion de via dateno anta�e"

#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
#: ../diskdrake.pm_.c:487
msgid "Read carefully!"
msgstr "Legu zorge"

#: ../diskdrake.pm_.c:146
#, c-format
msgid "After %s partition %s,"
msgstr "Post %s subdisko %s,"

#: ../diskdrake.pm_.c:146
msgid "all data on this partition will be lost"
msgstr "�iuj datenoj en �i tiu subdisko estos perdata"

#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71
#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304
msgid "Error"
msgstr "Eraro"

#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
msgid "Mount point: "
msgstr "Surmetingo: "

#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
msgid "Device: "
msgstr "Aparato: "

#: ../diskdrake.pm_.c:191
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"

#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
msgid "Type: "
msgstr "Speco: "

#: ../diskdrake.pm_.c:193
#, c-format
msgid "Start: sector %s\n"
msgstr "Komenco: sektoro %s\n"

#: ../diskdrake.pm_.c:194
#, c-format
msgid "Size: %s MB"
msgstr "Grandeco: %s mb"

#: ../diskdrake.pm_.c:196
#, c-format
msgid ", %s sectors"
msgstr ", %s sektoroj"

#: ../diskdrake.pm_.c:198
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "De cilindro %d al cilindro %d\n"

#: ../diskdrake.pm_.c:199
msgid "Formatted\n"
msgstr "Formatita\n"

#: ../diskdrake.pm_.c:200
msgid "Not formatted\n"
msgstr "Ne formatita\n"

#: ../diskdrake.pm_.c:201
msgid "Mounted\n"
msgstr "Muntita\n"

#: ../diskdrake.pm_.c:202
#, c-format
msgid "RAID md%s\n"
msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"

#: ../diskdrake.pm_.c:203
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Subdisko startata defa�lte\n"
"    (por MS-DOS starto, ne por \"lilo\")\n"

#: ../diskdrake.pm_.c:205
#, c-format
msgid "Level %s\n"
msgstr "Nivelo %s\n"

#: ../diskdrake.pm_.c:206
#, c-format
msgid "Chunk size %s\n"
msgstr "Grandeco de pecoj %s\n"

#: ../diskdrake.pm_.c:207
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"

#: ../diskdrake.pm_.c:224
msgid "Please click on a partition"
msgstr "Bonvolu klaki sur subdiskon"

#: ../diskdrake.pm_.c:229
#, c-format
msgid "Size: %d MB\n"
msgstr "Grandeco: %d mb\n"

#: ../diskdrake.pm_.c:230
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"

#: ../diskdrake.pm_.c:232
#, c-format
msgid "on bus %d id %d\n"
msgstr "�e buso %d identiga�o %d\n"

#: ../diskdrake.pm_.c:245
msgid "Mount"
msgstr "Muntu"

#: ../diskdrake.pm_.c:246
msgid "Active"
msgstr "Aktiva"

#: ../diskdrake.pm_.c:247
msgid "Add to RAID"
msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../diskdrake.pm_.c:248
msgid "Remove from RAID"
msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../diskdrake.pm_.c:249
msgid "Modify RAID"
msgstr "�an�u RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../diskdrake.pm_.c:256
msgid "Choose action"
msgstr "Elektu agon"

#: ../diskdrake.pm_.c:349
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Beda�rinde mi ne kreas /boot tiom longe sur la drajvon (�e cilindro > "
"1024).\n"
"A� vi uzos LILO kaj �i ne funkcios, a� vi ne uzos LILO kaj vi ne bezonas\n"
"/boot."

#: ../diskdrake.pm_.c:353
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
"subdiskon.  Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
"/boot subdiskon."

#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
#, c-format
msgid "Use ``%s'' instead"
msgstr "Uzu ``%s'' anstata�e"

#: ../diskdrake.pm_.c:375
msgid "Use ``Unmount'' first"
msgstr "Uzu ``Malmuntu'' anta�e"

#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
msgid "changing type of"
msgstr "�an�ante speco de"

#: ../diskdrake.pm_.c:388
msgid "Continue anyway?"
msgstr "�u mi devus da�ri malgra�e?"

#: ../diskdrake.pm_.c:393
msgid "Quit without saving"
msgstr "�u eliru sen konservi"

#: ../diskdrake.pm_.c:393
msgid "Quit without writing the partition table?"
msgstr "�u eliru sen skribi la subdisktabelon?"

#: ../diskdrake.pm_.c:412
msgid "Change partition type"
msgstr "�an�u subdiskspecon"

#: ../diskdrake.pm_.c:413
msgid "Which partition type do you want?"
msgstr "Kiun subdiskspecon deziras vi?"

#: ../diskdrake.pm_.c:429
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Kie vi deziras munti aparato %s?"

#: ../diskdrake.pm_.c:451
msgid "formatting"
msgstr "formatas"

#: ../diskdrake.pm_.c:453
msgid "Formatting"
msgstr "Formatas"

#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221
#, c-format
msgid "Formatting partition %s"
msgstr "Formatas subdiskon %s"

#: ../diskdrake.pm_.c:458
msgid "After formatting all partitions,"
msgstr "Post formatado de �iuj subdisko,"

#: ../diskdrake.pm_.c:458
msgid "all data on these partitions will be lost"
msgstr "�iuj datenoj sur tiuj subdisko estos perdata"

#: ../diskdrake.pm_.c:468
msgid "Move"
msgstr "Movu"

#: ../diskdrake.pm_.c:469
msgid "Which disk do you want to move to?"
msgstr "Al kiu disko vi deziras movi?"

#: ../diskdrake.pm_.c:473
msgid "Sector"
msgstr "Sektoro"

#: ../diskdrake.pm_.c:474
msgid "Which sector do you want to move to?"
msgstr "Al kiu sektoro vi deziras movi?"

#: ../diskdrake.pm_.c:477
msgid "Moving"
msgstr "Movante"

#: ../diskdrake.pm_.c:477
msgid "Moving partition..."
msgstr "Movas subdisko..."

#: ../diskdrake.pm_.c:487
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"

#: ../diskdrake.pm_.c:489
msgid "You'll need to reboot before the modification can take place"
msgstr "Vi bezonos restarti anta� ol la �an�o povas efektivi�i"

#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
msgid "Computing fat filesystem bounds"
msgstr "Kalkulas FAT dosiersistemajn limojn"

#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
#: ../install_steps_gtk.pm_.c:255
msgid "Resizing"
msgstr "Regrandecigas"

#: ../diskdrake.pm_.c:524
msgid "resizing"
msgstr "regrandecigas"

#: ../diskdrake.pm_.c:534
msgid "Choose the new size"
msgstr "Elektu la novan grandecon"

#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287
#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:317
#: ../install_steps_gtk.pm_.c:361
msgid "MB"
msgstr "mb"

#: ../diskdrake.pm_.c:587
msgid "Create a new partition"
msgstr "Kreu novan subdiskon"

#: ../diskdrake.pm_.c:603
msgid "Start sector: "
msgstr "Komenca sektoro: "

#: ../diskdrake.pm_.c:606
msgid "Size in MB: "
msgstr "Grandeco en mb: "

#: ../diskdrake.pm_.c:609
msgid "Filesystem type: "
msgstr "Speco de dosiersistemo: "

#: ../diskdrake.pm_.c:611
msgid "Preference: "
msgstr "Prefero: "

#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
msgid "Select file"
msgstr "Elektu dosieron"

#: ../diskdrake.pm_.c:664
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"La rezerva subdisktabelo ne estas la sama grandeco\n"
"�u da�ras tamen?"

#: ../diskdrake.pm_.c:672
msgid "Warning"
msgstr "Averto"

#: ../diskdrake.pm_.c:673
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"En�ovu disketon en drajvo\n"
"�iuj datenoj sur tiu disketo estos perdata"

#: ../diskdrake.pm_.c:687
msgid "Trying to rescue partition table"
msgstr "Provas savi subdisktabelon"

#: ../diskdrake.pm_.c:698
msgid "device"
msgstr "aparato"

#: ../diskdrake.pm_.c:699
msgid "level"
msgstr "nivelo"

#: ../diskdrake.pm_.c:700
msgid "chunk size"
msgstr "grandeco de pecoj"

#: ../diskdrake.pm_.c:712
msgid "Choose an existing RAID to add to"
msgstr ""
"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
"aldoni al"

#: ../diskdrake.pm_.c:713
msgid "new"
msgstr "nova"

#: ../fs.pm_.c:67 ../fs.pm_.c:73
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatado de %s malsukcesis"

#: ../fs.pm_.c:93
#, c-format
msgid "don't know how to format %s in type %s"
msgstr "ne scias kiel formati %s kiel speco %s"

#: ../fs.pm_.c:106
msgid "nfs mount failed"
msgstr "Muntado de NFS (retdosiersistemo) malsukcesis"

#: ../fs.pm_.c:123
msgid "mount failed: "
msgstr "muntado malsukcesis: "

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr "eraro dum malmunti %s: %s"

#: ../fsedit.pm_.c:219
msgid "Mount points must begin with a leading /"
msgstr "Surmetingoj devas komenci kun anta�a /"

#: ../fsedit.pm_.c:222
#, c-format
msgid "There is already a partition with mount point %s"
msgstr "Jam estas subdisko kun surmetingo �e %s"

#: ../fsedit.pm_.c:306
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Eraro dum malfermado de %s por skribi: %s"

#: ../fsedit.pm_.c:388
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei\n"
"novajn dosiersistemojn.  Bonvolu kontroli vian ekipa�on por la ka�zo de �i\n"
"tiu problemo."

#: ../fsedit.pm_.c:403
msgid "You don't have any partitions!"
msgstr "Vi ne havas iujn ajn subdiskojn!"

#: ../help.pm_.c:7
msgid "Choose preferred language for install and system usage."
msgstr "Elektu preferatan lingvon por instalado kaj sistema uzado."

#: ../help.pm_.c:10
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr "Elektu la aran�on de via klavaro el la listo supre"

#: ../help.pm_.c:13
msgid ""
"Choose \"Install\" if there are no previous versions of Linux\n"
"installed, or if you wish to use multiple distributions or versions.\n"
"\n"
"\n"
"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
"(Helios) or Gold 2000."
msgstr ""
"Elektu \"Instalu\" se vi ne havas anta�an version de Linukso instalita,\n"
"a� se vi deziras uzi plurajn distribua�ojn a� versiojn.\n"
"\n"
"\n"
"Elektu \"Promociu\" se vi deziras �isdatigi anta�an version de Mandrejka\n"
"Linukso: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
"6.1 (Helios) a� Gold 2000."

#: ../help.pm_.c:22
msgid ""
"Select:\n"
"\n"
"  - Recommended: If you have never installed Linux before.\n"
"\n"
"\n"
"  - Customized: If you are familiar with Linux, you will be able to \n"
"select the usage for the installed system between normal, development or\n"
"server. Choose \"Normal\" for a general purpose installation of your\n"
"computer. You may choose \"Development\" if you will be using the computer\n"
"primarily for software development, or choose \"Server\" if you wish to\n"
"install a general purpose server (for mail, printing...).\n"
"\n"
"\n"
"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
"a highly customized installation, this Install Class is for you. You will\n"
"be able to select the usage of your installed system as for \"Customized\"."
msgstr ""
"Elektu:\n"
"\n"
"  - Rekomendata: Se vi neniam instalis Linukson anta�e.\n"
"\n"
"\n"
"  - Akomodata: Se vi konas Linukson, vi povos elekti la uzado de la\n"
"instalota sistemo inter \"Normala\", \"Programisto\" a� \"Servilo\".  "
"Elektu\n"
"\"Normala\" por �eneralcela instala�o de via komputilo.  Vi povas elekti\n"
"\"Programisto\" se vi uzos la komputilon �efe por verki programojn, a�\n"
"elektu \"Servilo\" se vi deziras instali �eneralcelan servilon (por\n"
"retpo�to, printado, ktp...).\n"
"\n"
"  - Spertulo: Se vi estas flua pri GNU/Linukso kaj deziras fari tre\n"
"akomoditan instaladon, �i tiu InstalKlaso estas utila por vi.  Vi\n"
"povas elekti la uzadon de via instalota sistemo same kiel \"Akomodata\"."

#: ../help.pm_.c:40
msgid ""
"DrakX will attempt at first to look for one or more PCI\n"
"SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
"to use, it will insert it (them)  automatically.\n"
"\n"
"\n"
"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
"doesn't know which driver to use for this card, or if you have no\n"
"SCSI adapters at all, you will then be prompted on whether you have\n"
"one or not. If you have none, answer \"No\". If you have one or more,\n"
"answer \"Yes\". A list of drivers will then pop up, from which you\n"
"will have to select one.\n"
"\n"
"\n"
"After you have selected the driver, DrakX will ask if you\n"
"want to specify options for it. First, try and let the driver\n"
"probe for the hardware: it usually works fine.\n"
"\n"
"\n"
"If not, do not forget the information on your hardware that you\n"
"could get from your documentation or from Windows (if you have it\n"
"on your system), as suggested by the installation guide. These\n"
"are the options you will need to provide to the driver."
msgstr ""
"DrakX unue provos ser�i unu a� pli PCI-a SCSI-a adaptilo(j)n.  Se �i trovas\n"
"�in (a� ilin) kaj scias kiu(j)n pelilo(j)n uzi, �i en�ovos �in (ilin)\n"
"a�tomate.\n"
"\n"
"\n"
"Se via SCSI-a adaptilo estas ISA-a karto, a� �i estas PCI-a karto sed DrakX\n"
"ne scias kiun pelilon uzi por tiu karto, a� se vi havas neniujn SCSI-ajn\n"
"adaptilojn, DrakX instigos vin �u vi havas unu.  Se mankas al vi, respondu\n"
"\"Ne\".  Se vi havas unu a� pli, respondu \"Jes\".  Sekve DrakX montros "
"liston de\n"
"peliloj, de kiu vi devas elekti unu.\n"
"\n"
"\n"
"Post vi elektos la pelilon, DrakX demandos al vi se vi deziras elekti "
"opciojn\n"
"por �i.  Unue, provu lasi la pelilon esplori por la karton: tio �i kutime\n"
"sukcesas.\n"
"\n"
"\n"
"Se ne, ne forgesu la informon pri via aparataro kiu vi povus trovi en la\n"
"dokumentaro a� de Vindozo (se vi havas �in �e via komputilo), kiel "
"sugestata\n"
"de la instalgvidlibro.  �i tiuj estas opcioj vi bezonos doni al la pelilo."

#: ../help.pm_.c:64
msgid ""
"At this point, you may choose what partition(s) to use to install\n"
"your Linux-Mandrake system if they have been already defined (from a\n"
"previous install of Linux or from another partitionning tool). In other\n"
"cases, hard drive partitions must be defined. This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use.\n"
"\n"
"\n"
"If you have to create new partitions, use \"Auto allocate\" to "
"automatically\n"
"create partitions for Linux. You can select the disk for partitionning by\n"
"clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"Two common partition are: the root partition (/), which is the starting\n"
"point of the filesystem's directory hierarchy, and /boot, which contains\n"
"all files necessary to start the operating system when the\n"
"computer is first turned on.\n"
"\n"
"\n"
"Because the effects of this process are usually irreversible, partitioning\n"
"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
"simplifies the process so that it need not be. Consult the documentation\n"
"and take your time before proceeding."
msgstr ""
"Nun, vi povas elekti kiu(j)n subdisko(j)n vi deziras uzi por instali vian\n"
"Linuks-Mandrejkan sistemon se ili jam estas determinita (de anta�a "
"instalado\n"
"de Linukso a� de alia subdiskigilo).  Aliokaze, vi devas fari durdiskajn\n"
"subdiskojn.  �i tiu operacio konsistas el logike dividi la durdiskon en\n"
"apartajn subdiskojn for uzado.\n"
"\n"
"\n"
"Se vi devas krei novajn subdiskojn, uzu \"A�tomate disponigu\" por a�tomate "
"krei\n"
"subdiskojn por Linukso.  Vi povas elekti la diskon por subdiskigi per klaki\n"
"\"hda\" por la unua IDE-a disko, \"hdb\" por la dua a� \"sda\" por la unua "
"SCSI-a\n"
"disko, ktp.\n"
"\n"
"\n"
"Du kutimaj subdiskoj estas: la radika subdisko (/), kiu estas la komenca "
"loko\n"
"de la dosieruja arbo de la dosiersistemo, kaj /boot, kiu enhavas �iuj el la\n"
"dosieroj bezonata por starti la mastruma sistemo kiam la komputilo unue "
"estas\n"
"�altata.\n"
"\n"
"\n"
"�ar la efikoj de tiu �i proceso kutime estas neinversigebla, subdiskigado\n"
"povas esti timiga kaj stresiga por la sensperta uzanto.  DiskDrake "
"simpligas\n"
"la proceson por ke �i la bezonu esti.  Konsultu la dokumentaron kaj "
"malhastu\n"
"anta� ol vi da�ros."

#: ../help.pm_.c:90
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use (formatting meaning creating a filesystem). At this time, you may\n"
"wish to re-format some already existing partitions to erase the data\n"
"they contain. Note: it is not necessary to re-format pre-existing\n"
"partitions, particularly if they contain files or data you wish to keep.\n"
"Typically retained are /home and /usr/local."
msgstr ""
"Iuj subdiskoj kiuj estas lastatempe kreita devas esti formatata por uzi\n"
"(formatado estas la kreado de dosiersistemo �e la subdisko).  Nune, vi eble\n"
"deziras reformati iom da subdiskojn kiuj jam ekzistas por forvi�i la "
"datenojn\n"
"kiujn ili enhavas.  Notu: ne estas necesa reformati anta�ekzistitajn\n"
"subdiskojn, precipe se ili enhavas dosierojn a� datenojn kiuj vi deziras\n"
"konservi.  Kutime konservata estas �ome kaj /usr/local."

#: ../help.pm_.c:98
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"\n"
"First you can select group of package to install or upgrade. After that\n"
"you can select more packages according to the total size you wish to\n"
"select.\n"
"\n"
"\n"
"If you are in expert mode, you can select packages individually.\n"
"Please note that some packages require the installation of others.\n"
"These are referred to as package dependencies. The packages you select,\n"
"and the packages they require will be automatically selected for\n"
"install. It is impossible to install a package without installing all\n"
"of its dependencies."
msgstr ""
"Nun vi povas elekti la paka�ojn kiujn vi deziras instali.\n"
"\n"
"\n"
"Unue vi povas elekti grupon de paka�ojn por instali a� promocii.  Poste vi\n"
"povas elekti pli da paka�ojn la� la grandeco vi deziras elekti.\n"
"\n"
"\n"
"Se vi estas en la re�imo por Spertuloj, vi povas elekti paka�ojn individue.\n"
"Bonvole notu ke iu paka�oj necesigas la instaladon de aliaj paka�oj.  �i "
"tiuj\n"
"estas nomataj paka�aj dependa�oj.  La paka�ojn kiujn vi elektas, kaj la\n"
"paka�ojn kiujn ili necesigas estos a�tomate elektataj por instalado.  �i\n"
"estas neebla instali paka�on sen anka� instali �iujn el �iaj dependa�oj."

#: ../help.pm_.c:114
msgid ""
"The packages selected are now being installed. This operation\n"
"should take a few minutes unless you have chosen to upgrade an\n"
"existing system, in that case it can take more time even before\n"
"upgrade starts."
msgstr ""
"La elektitaj paka�oj nun estas instalata.  �i tiu operacio devus da�ri\n"
"kelkajn minutojn krom se vi elektis promocii ekzistan sistemon.  Tiuokaze\n"
"�i eble da�ras pli da tempo anta� la promocio komencos."

#: ../help.pm_.c:120
msgid ""
"If DrakX failed to find your mouse, or if you want to\n"
"check what it has done, you will be presented the list of mice\n"
"above.\n"
"\n"
"\n"
"If you agree with DrakX' settings, just jump to the section\n"
"you want by clicking on it in the menu on the left. Otherwise,\n"
"choose a mouse type in the menu which you think is the closest\n"
"match for your mouse.\n"
"\n"
"\n"
"In case of a serial mouse, you will also have to tell DrakX\n"
"which serial port it is connected to."
msgstr ""
"Se DrakX malsukcesis trovi vian muson, a� se vi deziras kontroli kion �i\n"
"faris, liston de musospecoj prezentos al vi supre.\n"
"\n"
"\n"
"Se vi konsentas kun la opcioj ke DrakX elektis, simple saltu al la sekcio\n"
"vi deziras per klaki sur �in en la menuo �e la maldekstra.  Aliokaze, "
"elektu\n"
"specon de muso el la menuo kiun vi pensas estas la plej proksima egala�o\n"
"de via muso.\n"
"\n"
"\n"
"Okaze de seria muso, vi anka� devas diri al DrakX al kiu seria pordo �i\n"
"estas konektata."

#: ../help.pm_.c:135
msgid ""
"Please select the correct port. For example, the COM1 port in MS Windows\n"
"is named ttyS0 in Linux."
msgstr ""
"Bonvolu elekti la �ustan pordon.  Ekzemple, la COM1-a pordo sub MS Vindozo\n"
"estas nomata ttyS0 sub Linukso."

#: ../help.pm_.c:139
msgid ""
"This section is dedicated to configuring a local area\n"
"network (LAN) or a modem.\n"
"\n"
"Choose \"Local LAN\" and DrakX will\n"
"try to find an Ethernet adapter on your machine. PCI adapters\n"
"should be found and initialized automatically.\n"
"However, if your peripheral is ISA, autodetection will not work,\n"
"and you will have to choose a driver from the list that will appear then.\n"
"\n"
"\n"
"As for SCSI adapters, you can let the driver probe for the adapter\n"
"in the first time, otherwise you will have to specify the options\n"
"to the driver that you will have fetched from documentation of your\n"
"hardware.\n"
"\n"
"\n"
"If you install a Linux-Mandrake system on a machine which is part\n"
"of an already existing network, the network administrator will\n"
"have given you all necessary information (IP address, network\n"
"submask or netmask for short, and hostname). If you're setting\n"
"up a private network at home for example, you should choose\n"
"addresses.\n"
"\n"
"\n"
"Choose \"Dialup with modem\" and the Internet connection with\n"
"a modem will be configured. DrakX will try to find your modem,\n"
"if it fails you will have to select the right serial port where\n"
"your modem is connected to."
msgstr ""
"�i tiu sekcio estas dedi�ita al la konfigurado de loka reto a� modemo.\n"
"\n"
"Elektu \"Loka Reto\" kaj DrakX provos trovi Eterretan adaptilon �e via\n"
"komputilo.  PCI-aj adaptiloj devus esti trovataj kaj initataj a�tomate.\n"
"Tamen, se via periferio estas ISA-a, a�tomata detektado ne funckios, kaj\n"
"vi devos elekti pelilon el la listo kiu aperos tiam.\n"
"\n"
"\n"
"Por SCSI-aj adaptiloj, vi povas lasi ke la pelilo esploros por la adaptilo\n"
"unuafoje, aliokaze vi devas difini la opciojn al la pelilo kiuj vi havigas "
"de\n"
"la dokumentaro de via adaptilo.\n"
"\n"
"\n"
"Se vi instalas Linuks-Mandrejkan sistemon kiu estas parto de jam ekzistanta\n"
"reto, la retadministranto estos donintan al vi �iuj el la necesa informo\n"
"(IP-adreso, reta submasko a� retmasko mallonge, kaj po�tejo).  Se vi "
"establas\n"
"privatan reton hejme ekzemple, vi devus elekti adresojn.\n"
"\n"
"\n"
"Elektu \"Telefona konekto kun modemo\" kaj la Interreta konekto kun modemo\n"
"estos konfigurata.  DrakX provos trovi vian modemon.  Se �i malsukcesas vi\n"
"devos elekti la �ustan serian pordon kie via modemo estas konektata."

#: ../help.pm_.c:169
msgid ""
"Enter:\n"
"\n"
"  - IP address: if you don't know it, ask your network administrator or "
"ISP.\n"
"\n"
"\n"
"  - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
"sure, ask your network administrator or ISP.\n"
"\n"
"\n"
"  - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
"this option. If selected, no value is needed in \"IP address\". If you are\n"
"not sure, ask your network administrator or ISP.\n"
msgstr ""
"Enigu:\n"
"\n"
"  - IP-adreson: Se vi ne scias, demandu al via retadministranto.\n"
"\n"
"\n"
"  - Retmaskon: \"255.255.255.0\" �enerale estas bona elekta�o.  Se vi ne\n"
"estas certa, demandu al via retadministranto.\n"
"\n"
"\n"
"  - A�tomata IP-adreson: Se via reto uzas bootp-an a� dhcp-an protokolon,\n"
"elektu �i tiun opcion.  Se elektita, neniu valoro estas bezonata en\n"
"\"IP-adreson\".  Se vi ne estas certa, demandu al via retadministranto.\n"

#: ../help.pm_.c:184
msgid ""
"You may now enter dialup options. If you're not sure what to enter, the\n"
"correct information can be obtained from your ISP."
msgstr ""
"Nun vi povas enigi telefon-konektajn opciojn.  Se vi ne estas certa kio "
"enigi,\n"
"vi povas havigi la �ustan informon de via interretprovizanto."

#: ../help.pm_.c:188
msgid ""
"If you will use proxies, please configure them now. If you don't know if\n"
"you will use proxies, ask your network administrator or your ISP."
msgstr ""
"Se vi uzos prokurajn servilojn, bonvolu konfiguri ilin nune.  Se vi ne\n"
"scias �u vi uzos prokurajn servilojn, demandu al via retadministranto a�\n"
"interretprovizanto."

#: ../help.pm_.c:192
msgid ""
"You can install cryptographic package if your internet connection has been\n"
"set up correctly. First choose a mirror where you wish to download packages "
"and\n"
"after that select the packages to install.\n"
"\n"
"Note you have to select mirror and cryptographic packages according\n"
"to your legislation."
msgstr ""
"Vi povas instali kriptografian paka�on se via interreta konekto estas �uste\n"
"pretigita.  Unue elektu spegulon de kie vi deziras el�uti paka�ojn kaj "
"poste\n"
"elektu la paka�ojn por instali.\n"
"\n"
"Notu ke vi devas elekti spegulon kaj kriptografiajn paka�ojn la� la "
"le�donoj\n"
"de via lando."

#: ../help.pm_.c:200
msgid ""
"You can now select your timezone according to where you live.\n"
"\n"
"\n"
"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
"in local time according to the time zone you have selected."
msgstr ""
"Nun vi povas elekti vian horzonon la� kie vi lo�as.\n"
"\n"
"\n"
"Linukso administras tempon en GMT a� \"Grenvi�a Meza Tempo\" kaj tradukas "
"�in\n"
"en lokan tempon la� la horzono vi elektis."

#: ../help.pm_.c:207
msgid "Help"
msgstr "Helpu"

#: ../help.pm_.c:210
msgid ""
"Linux can deal with many types of printer. Each of these\n"
"types require a different setup.\n"
"\n"
"\n"
"If your printer is directly connected to your computer, select\n"
"\"Local printer\". You will then have to tell which port your\n"
"printer is connected to, and select the appropriate filter.\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine,\n"
"you will have to select \"Remote lpd\". In order to make\n"
"it work, no username or password is required, but you will need\n"
"to know the name of the printing queue on this server.\n"
"\n"
"\n"
"If you want to access a SMB printer (which means, a printer located\n"
"on a remote Windows 9x/NT machine), you will have to specify its\n"
"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
"plus the username, workgroup and password required in order to\n"
"access the printer, and of course the name of the printer. The same goes\n"
"for a NetWare printer, except that you need no workgroup information."
msgstr ""
"Linukso povas uzi multajn specojn de printiloj.  �iuj el �i tiuj specoj\n"
"postulas malsaman aran�on.\n"
"\n"
"\n"
"Se via printilo estas rekte konektata al via komputilo, elektu \"Loka\n"
"printilo\".  Tiam vi devos diri al kiu pordo vi printilo estas konektata,\n"
"kaj elekti la ta�gan filtrilon.\n"
"\n"
"\n"
"Se vi deziras atingi printilon situantan �e malproksima Uniksa komputilo,\n"
"vi devos elekti \"Malproksima lpd (printila demono)\".  Por funkciigi �in,\n"
"nek salutnomo nek pasvorto estas postulata, sed vi bezonos scii la nomon\n"
"de la printvico �e tiu �i servilo.\n"
"\n"
"\n"
"Se vi deziras atingi SMB-a printilo (kiu signifas, printilo situanta �e\n"
"malproksima Vindoza 9x/NT-a komputilo, vi devos doni �ian SMB-nomon (kiu\n"
"ne estas �ia TCP/IP-nomo), kaj eble �ian IP-adreson, kaj la salutnomo,\n"
"laborgrupo kaj pasvorto bezonata por atingi la printilon, kaj kompreneble\n"
"la nomo de la printilo.  La sama validas por NetWare-a printilo, krom vi\n"
"ne bonzonas laborgrupan informon."

#: ../help.pm_.c:233
msgid ""
"You can now enter the root password for your Linux-Mandrake\n"
"system. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"\n"
"Root is the administrator of the system, and is the only user\n"
"allowed to modify the system configuration. Therefore, choose\n"
"this password carefully! Unauthorized use of the root account can\n"
"be extremely dangerous to the integrity of the system and its data,\n"
"and other systems connected to it. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should *never* be written down. Do not make the password too long or\n"
"complicated, though: you must be able to remember without too much\n"
"effort."
msgstr ""
"Nun vi povas enigi la \"root\" (radiko) pasvorto por via Linuks-Mandrejka\n"
"sistemo.  Vi devas enigi la pasvorton dufoje por konfirmi ke amba� fojoj\n"
"estas identaj.\n"
"\n"
"\n"
"La \"root\"-a uzanto estas la administranto de la sistemo, kaj estas la "
"sola\n"
"uzanto permesata �an�i la sisteman konfigura�on.  Tial, elektu �i tiun\n"
"pasvorton zorge!  Nepermesata uzado de la \"root\"-a uzanto povas esti\n"
"treege dan�era al la sistema integreco kaj dateno, kaj al aliaj sistemoj\n"
"konektata al �i.  La pasvorto devus esti miksa�o de literciferaj signoj kaj\n"
"almena� 8 signoj longa.  *Neniam* surpaperigu �in.  Tamen, ne elektu tro\n"
"longan a� komplikan pasvorton: vi devas povi memori �in sen tro multe da\n"
"peno."

#: ../help.pm_.c:249
msgid ""
"To enable a more secure system, you should select \"Use shadow file\" and\n"
"\"Use MD5 passwords\"."
msgstr ""
"Por ebligi pli sekuran sistemon, vi devus elekti \"\" kaj\n"
"\"Uzu MD5-ajn pasvortojn\"."

#: ../help.pm_.c:253
msgid ""
"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
"network administrator."
msgstr ""
"Se via reto uzas NIS, elektu \"Uzu NIS\".  Se vi ne scias, demandu al via\n"
"retadministranto."

#: ../help.pm_.c:257
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"privileged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""
"Nun vi povas krei unu a� pli \"ordinara(j)\" uzanto(j), male al la\n"
"\"privilegia\" uzanto, \"root\".  Vi povas krei unu a� pli uzanto(j) por\n"
"�iu persono vi deziras permesi uzi la komputilon.  Notu ke �iu uzanto\n"
"havos viajn proprajn preferojn (grafikan medion, programajn aran�ojn,\n"
"ktp.) kaj �ian propran \"hejman dosierujon\", kie �i tiuj preferoj estas\n"
"konservata.\n"
"\n"
"\n"
"Anta� �io, krei uzanton por vi mem!  E� se vi estos la sola uzulo �e la\n"
"komputilo, vi ne devus konekti kiel \"root\" por �iutaga uzado de la\n"
"sistemo: �i estas tre alta sekureca risko.  Fari la sistemon neuzebla\n"
"estas oftege nur unu misklavo fora.\n"
"\n"
"\n"
"Tial, vi devus konekti al la sistemo per ordinara uzanto vi kreos �i tie,\n"
"kaj saluti kiel \"root\" nur por administraj kaj flegadaj kialoj."

#: ../help.pm_.c:276
msgid ""
"It is strongly recommended that you answer \"Yes\" here. If you install\n"
"Microsoft Windows at a later date it will overwrite the boot sector.\n"
"Unless you have made a bootdisk as suggested, you will not be able to\n"
"boot into Linux any more."
msgstr ""
"Bonvolege respondu \"Jes\" �i tie!  Se via instalos Vindozon estontece,\n"
"�i superskribos la startigan sektoron.  Krom se vi faris startigan diskon\n"
"kiel sugestata, vi ne plu eblas starti Linukson!"

#: ../help.pm_.c:282
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""
"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
"por starti Linukson.\n"
"\n"
"\n"
"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
"drajvo (MBR)\""

#: ../help.pm_.c:290
msgid ""
"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
"(the master drive on the primary channel)."
msgstr ""
"Krom se vi scias precize alie, la kutima elekta�o estas \"/dev/hda\" (la\n"
"�efdrajvo �e la �efa kanalo)."

#: ../help.pm_.c:294
msgid ""
"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
"Normally they are correctly detected during installation. If you don't\n"
"see yours detected, you can add one or more now.\n"
"\n"
"\n"
"If you don't want that everybody could access at one of them, you can "
"remove\n"
"it now (a boot disk will be needed to boot it)."
msgstr ""
"LILO (la Linuksa �argilo, \"LInux LOader\") povas starti Linukson kaj "
"aliajn\n"
"mastrumajn sistemojn.  Normale ili estas �uste trovataj dum instalado.  Se\n"
"vi ne vidas viajn trovita, vi povas aldoni unu a� pli nun.\n"
"\n"
"\n"
"Se vi ne deziras ke �iuj povas uzi unu el ili, vi povas forigi �in nun\n"
"(vi bezonos startdisketon por starti �in)."

#: ../help.pm_.c:303
msgid ""
"LILO main options are:\n"
"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
"partition) that contains the boot sector. Unless you know specifically\n"
"otherwise, choose \"/dev/hda\".\n"
"\n"
"\n"
"  - Linear: Generate linear sector addresses instead of\n"
"sector/head/cylinder addresses. Linear addresses are translated at run\n"
"time and do not depend on disk geometry. Note that boot disks may not be\n"
"portable if \"linear\" is used, because the BIOS service to determine the\n"
"disk geometry does not work reliably for floppy  disks. When using\n"
"\"linear\" with large disks, /sbin/lilo may generate references to\n"
"inaccessible disk areas, because 3D sector addresses are not known\n"
"before boot time.\n"
"\n"
"\n"
"  - Compact: Tries to merge read requests for adjacent sectors into a\n"
"single read request. This drastically reduces load time and keeps the\n"
"map smaller. Using \"compact\" is especially recommended when booting from\n"
"a floppy disk.\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero.\n"
"\n"
"\n"
"  - Video mode: This specifies the VGA text mode that should be selected\n"
"when booting. The following values are available: \n"
"    * normal: select normal 80x25 text mode.\n"
"    * <number>:  use the corresponding text mode."
msgstr ""
"La �efaj opcioj de LILO estas:\n"
"  - Startaparato: Elektas la nomon de la aparato (ekz-e, subdisko) kiu\n"
"enhavas la startan sektoron.  Krom se vi scias precize alie, elektu\n"
"\"/dev/hda\".\n"
"\n"
"\n"
"  - Linia: Generu liniajn sektoradresojn anstata� sektoraj/kapaj/cilindraj\n"
"adresoj.  Liniaj adresoj estas tradukata rultempe kaj ne dependas de\n"
"drajvogeometrio.  Notu ke startdisketoj eble ne estas porteblaj se vi uzas\n"
"\"Linia\", �ar la baza enigeligordonaro (BIOS) servo por determini la\n"
"drajvogeometrio ne fidinde funkcias por disketoj.  Dum uzi \"Linia\" kun\n"
"grandaj drajvoj, /sbin/lilo eble generos referencojn al neatingeblaj\n"
"drajvlokoj, �ar tridimensiaj sektoradresoj ne estas konita anta� startado.\n"
"\n"
"\n"
"  - Kompakta: Provas kunfandi legajn petojn por najbaraj sektoroj en unu\n"
"legan peton.  �i tio draste malplii�as �argtempon kaj tenas la mapon pli\n"
"malgrandan.  Uzado de \"Kompakta\" estas precipe rekomendata kiam vi "
"startas\n"
"de disketo.\n"
"\n"
"\n"
"  - Prokrastoperiodo anta� starti defa�ltan sistemon: Montras la tempon\n"
"en dekonoj da sekundoj ke la start�argilo devus atendi anta� starti la\n"
"defa�ltan sistemon.  �i tiu estas utila �e sistemoj kiuj tuj startas de\n"
"la drajvo post ebligi la klavaron.  La start�argilo ne atendas se\n"
"\"Prokrastoperiodo\" estas forlasita a� estas fiksita al nul.\n"
"\n"
"\n"
"  - Grafika re�imo: �i tiu elektas la tekstan re�imon kiu devus esti uzata\n"
"dum starti.  La sekvaj valoroj estas haveblaj:\n"
"    * normala: elektu normalan 80x25-an tekstan re�imon\n"
"    * <nombro>: uzu la respondan tekstan re�imon."

#: ../help.pm_.c:338
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""
"Nun estas tempo por konfiguri la X Fenestra Sistemo, kiu estas la kerno\n"
"de la Linuksa GUI (Grafika UzulInterfaco).  Por tiu celo, vi devas\n"
"konfiguri vian grafikan karton kaj ekranon.  La plejparto de �i tiuj pa�oj\n"
"estas a�tomatitaj, tamen, do via laboro eble konsistos en konfirmi kion\n"
"estis farata kaj akcepti la aran�ojn. :)\n"
"\n"
"\n"
"Kiam la konfigurado estas kompleta, X lan�i�os (krom se vi demandas al\n"
"DrakX ne fari tion) pro ke vi kontrolu �in la observu se la aran�ojn\n"
"ta�gas por vi.  Se ne, vi povas reveni kaj �an�i ilin, tiom da tempoj kiom\n"
"estas necesa."

#: ../help.pm_.c:351
msgid ""
"If something is wrong in X configuration, use these options to correctly\n"
"configure the X Window System."
msgstr ""
"Se iu misas en la X-a konfigura�o, uzu �i tiujn opciojn por �uste konfiguri\n"
"la X Fenestran Sistemon."

#: ../help.pm_.c:355
msgid ""
"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
"\"No\"."
msgstr ""
"Se vi preferas uzi grafikan saluton, elektu \"Jes\".  Aliokaze, elektu "
"\"Ne\"."

#: ../help.pm_.c:359
msgid ""
"You can now select some miscellaneous options for you system.\n"
"\n"
"  - Use hard drive optimizations: This option can improve hard disk\n"
"accesses but is only for advanced users, it can ruin your hard drive if\n"
"used incorrectly. Use it only if you know how.\n"
"\n"
"\n"
"  - Choose security level: You can choose a security level for your\n"
"system.\n"
"    Please refer to the manual for more information.\n"
"\n"
"\n"
"  - Precise RAM size if needed: In some cases, Linux is unable to\n"
"correctly detect all the installed RAM on  some systems. If this is the\n"
"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
"normal.\n"
"\n"
"\n"
"  - Removable media automounting: If you would prefer not to manually\n"
"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
"\"umount\", select this option. \n"
"\n"
"\n"
"  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
"booting, select this option (Note: Num Lock will still not work under\n"
"X)."
msgstr ""
"Nun vi povas elekti iom da diversaj opcioj por via sistemo.\n"
"\n"
"  - Uzu drajvajn optimumiga�ojn: �i tiu opcio povas plibonigi tempo por\n"
"atingi datenon �e vi drajvoj, sed �i estas nur por spertuloj.  �i povas\n"
"ruinigi vian drajvon se vi uzas �in mal�uste.  Uzu �in nur se vi scias kiel\n"
"fari.\n"
"\n"
"\n"
"  - Elektu sekurnivelon: Vi povas elekti sekurnivelon por via sistemo.\n"
"    Bonvole konsulti la manlibron por pli da informo.\n"
"\n"
"\n"
"  - Preciza kvanto de memoro se bezonata: Iuokaze, Linukso ne estas ebla\n"
"�uste detekti �iun de la instalita memoro �e iuj sistemoj.  Se vi havas �i\n"
"tiun problemon, difinu la �ustan kvanton.  Notu: diferenco de 2 a� 4 mb "
"estas\n"
"normala.\n"
"\n"
"\n"
"  - A�tomata muntado de demetebla medio: Se vi preferus ne mane munti\n"
"demeteblajn drajvojn (KD-ROMojn, Disketojn, Zipdiskojn) per tajpi \"mount\"\n"
"kaj \"umount\", elektu �i tiun opcion.\n"
"\n"
"\n"
"  - Ebligu la \"Num Lock\"-an klavon je startado: Se vi deziras ke \"Num "
"Lock\"-o\n"
"estas ebligata post startado, elektu �i tiun opcion (Notu: \"Num Lock\" "
"ankora�\n"
"ne funkcias sub X)."

#: ../help.pm_.c:387
msgid ""
"Your system is going to reboot.\n"
"\n"
"After rebooting, your new Linux Mandrake system will load automatically.\n"
"If you want to boot into another existing operating system, please read\n"
"the additional instructions."
msgstr ""
"Via sistemo restartos.\n"
"\n"
"Post restartado, via nova Linuks-Mandrejka sistemo �argi�os a�tomate.  Se "
"vi\n"
"deziras starti en alian ekzistanta mastruman sistemon, bonvole legu la\n"
"pluan instrukcion."

#: ../install2.pm_.c:43
msgid "Choose your language"
msgstr "Elektu vian lingvon"

#: ../install2.pm_.c:44
msgid "Select installation class"
msgstr "Elektu instalklason"

#: ../install2.pm_.c:45
msgid "Setup SCSI"
msgstr "Konfiguru SCSI-on"

#: ../install2.pm_.c:46
msgid "Choose install or upgrade"
msgstr "Elektu instali a� promocii"

#: ../install2.pm_.c:47
msgid "Configure mouse"
msgstr "Konfiguru muson"

#: ../install2.pm_.c:48
msgid "Choose your keyboard"
msgstr "Elektu vian klavaron"

#: ../install2.pm_.c:49
msgid "Miscellaneous"
msgstr "Diversaj"

#: ../install2.pm_.c:50
msgid "Setup filesystems"
msgstr "Dosiersistemo konfiguro"

#: ../install2.pm_.c:51
msgid "Format partitions"
msgstr "Formatu subdiskojn"

#: ../install2.pm_.c:52
msgid "Choose packages to install"
msgstr "Elektu paka�ojn"

#: ../install2.pm_.c:53
msgid "Install system"
msgstr "Instalu sistemon"

#: ../install2.pm_.c:54
msgid "Configure networking"
msgstr "Konfiguru retumon"

#: ../install2.pm_.c:55
msgid "Cryptographic"
msgstr "Kripografia"

#: ../install2.pm_.c:56
msgid "Configure timezone"
msgstr "Konfiguru horzonon"

#: ../install2.pm_.c:58
msgid "Configure printer"
msgstr "Konfiguru printilon"

#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576
#: ../install_steps_interactive.pm_.c:577
msgid "Set root password"
msgstr "Difinu pasvorton de root"

#: ../install2.pm_.c:60
msgid "Add a user"
msgstr "Aldonu uzulon"

#: ../install2.pm_.c:61
msgid "Create a bootdisk"
msgstr "Kreu pra�argdisketon"

#: ../install2.pm_.c:62
msgid "Install bootloader"
msgstr "Instalu restart-�argilon"

#: ../install2.pm_.c:63
msgid "Configure X"
msgstr "Konfiguru X"

#: ../install2.pm_.c:64
msgid "Exit install"
msgstr "Eliru instalprogramon"

#: ../install2.pm_.c:83
msgid "beginner"
msgstr "komencanto"

#: ../install2.pm_.c:83
msgid "developer"
msgstr "programisto"

#: ../install2.pm_.c:83
msgid "expert"
msgstr "spertulo"

#: ../install2.pm_.c:83
msgid "server"
msgstr "servilo"

#: ../install2.pm_.c:311
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Vi devas havi radikan subdiskon.\n"
"Por �i tiu, kreu subdiskon (a� klaku estantan).\n"
"Sekve elektu la agon \"Surmetingo\" kaj faru �in '/'"

#: ../install2.pm_.c:327
msgid "Not enough swap to fulfill installation, please add some"
msgstr "Nesufi�a inter�an�ospaco por plenumi instalado, bonvolu aldoni iom"

#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Mi ne povas legi vian subdisktabelon, �i estas tro difektita por mi :(\n"
"Mi penos da�ri per blankigi difektitajn subdiskojn"

#: ../install_any.pm_.c:210
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake malsukcesis �uste legi la subdisktabelon.\n"
"Da�ri je via propra risko!"

#: ../install_any.pm_.c:220
msgid "Searching root partition."
msgstr "Ser�as la radikan subdiskon."

#: ../install_any.pm_.c:249
msgid "Information"
msgstr "Informo"

#: ../install_any.pm_.c:250
#, c-format
msgid "%s: This is not a root partition, please select another one."
msgstr "%s: �i tiu ne estas radika subdisko, bonvole elektu alian."

#: ../install_any.pm_.c:252
msgid "No root partition found"
msgstr "Ne trovis radikosubdiskon"

#: ../install_any.pm_.c:289
msgid "Can't use broadcast with no NIS domain"
msgstr "Ne povas uzi dissendadon sen NIS-a domajno"

#: ../install_any.pm_.c:473
msgid "Error reading file $f"
msgstr "Eraro dum legi dosiero $f"

#: ../install_any.pm_.c:479
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr "Malbona ekdosiero %s (malsukcesis %s)"

#: ../install_steps.pm_.c:72
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Eraro okazis, sed mi ne scias kiel trakti �in bone.\n"
"Da�ri je via propra risko."

#: ../install_steps.pm_.c:136
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duobla surmetingo %s"

#: ../install_steps.pm_.c:295
#, fuzzy, c-format
msgid "Welcome to %s"
msgstr "Bonvenon Al Rompistoj"

#: ../install_steps.pm_.c:562
msgid "No floppy drive available"
msgstr "Neniu disketilo havebla"

#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
#, c-format
msgid "Entering step `%s'\n"
msgstr "Eniras pa�on `%s'\n"

#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:294
msgid "You must have a swap partition"
msgstr "Vi devas havi inter�an�an subdiskon"

#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:296
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Vi ne havas inter�an�an subdiskon\n"
"\n"
"�u vi deziras da�ri tamen?"

#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:317
msgid "Choose the size you want to install"
msgstr "Elektu la grandecon kiu vi deziras instali"

#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:361
msgid "Total size: "
msgstr "Tuta grandeco: "

#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:373
#: ../standalone/rpmdrake_.c:136
#, c-format
msgid "Version: %s\n"
msgstr "Versio: %s\n"

#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:374
#: ../standalone/rpmdrake_.c:137
#, c-format
msgid "Size: %d KB\n"
msgstr "Grandeco: %d kb.\n"

#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:489
msgid "Choose the packages you want to install"
msgstr "Elektu la paka�ojn kiuj vi deziras instali"

#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:492
msgid "Info"
msgstr "Informo"

#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:500
#: ../install_steps_interactive.pm_.c:81 ../standalone/rpmdrake_.c:161
msgid "Install"
msgstr "Instalu"

#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:519
#: ../install_steps_interactive.pm_.c:317
msgid "Installing"
msgstr "Instalanta"

#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:526
msgid "Please wait, "
msgstr "Bonvolu atendi"

#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:528
msgid "Time remaining "
msgstr "Tempo restanta "

#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:529
msgid "Total time "
msgstr "Tuta tempo "

#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:534
#: ../install_steps_interactive.pm_.c:317
msgid "Preparing installation"
msgstr "Preparas instaladon"

#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:549
#, c-format
msgid "Installing package %s"
msgstr "Instalanta paka�o %s"

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
msgid "Go on anyway?"
msgstr "�u vi deziras da�ri tamen?"

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574
msgid "There was an error ordering packages:"
msgstr "Estis eraro ordigi paka�ojn:"

#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:893
msgid "Use existing configuration for X11?"
msgstr "Uzu ekzistantan konfiguron de X11 (X-fenestroj)?"

#: ../install_steps_gtk.pm_.c:259
msgid ""
"WARNING!\n"
"\n"
"DrakX now needs to resize your Windows partition. Be careful: this operation "
"is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"AVERTO!\n"
"\n"
"DrakX nun bezonas regrandecigi vian Vindozan subdiskon.  Zorgu: �i tiu\n"
"operacio estas dan�era.  Se vi ne jam faris �in, vi devus anta�e uzi\n"
"\"scandisk\" (kaj la�vole \"defrag\") kontra� �i tiu subdisko kaj fari "
"rezervan\n"
"kopion de via dateno.\n"
"Kiam vi estas certa, klaku \"Jeso\"."

#: ../install_steps_gtk.pm_.c:278
msgid "Automatic resizing failed"
msgstr "A�tomata regrandeci�o malsukcesis"

#: ../install_steps_gtk.pm_.c:312
msgid ""
"Now that you've selected desired groups, please choose \n"
"how many packages you want, ranging from minimal to full \n"
"installation of each selected groups."
msgstr ""

#: ../install_steps_gtk.pm_.c:315
msgid "You will be able to choose more precisely in next step"
msgstr "Vi povos elekti pli ekzakte dum la sekvanta pa�o"

#: ../install_steps_gtk.pm_.c:372
msgid "Bad package"
msgstr "Malbona paka�o"

#: ../install_steps_gtk.pm_.c:522
msgid "Estimating"
msgstr "Taksas"

#: ../install_steps_gtk.pm_.c:544
#, c-format
msgid "%d packages"
msgstr "%d paka�oj"

#: ../install_steps_gtk.pm_.c:544
msgid ", %U MB"
msgstr ", %U mb."

#: ../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "Eraro okazis"

#: ../install_steps_interactive.pm_.c:54
msgid "Which language do you want?"
msgstr "Kiun lingvon vi deziras?"

#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
msgid "Keyboard"
msgstr "Klavaro"

#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
msgid "What is your keyboard layout?"
msgstr "Kiu estas via klavara aran�o?"

#: ../install_steps_interactive.pm_.c:79
msgid "Install/Upgrade"
msgstr "Instalu/Promociu"

#: ../install_steps_interactive.pm_.c:80
msgid "Is this an install or an upgrade?"
msgstr "�u tiu �i estas instalado a� promociado?"

#: ../install_steps_interactive.pm_.c:81
msgid "Upgrade"
msgstr "Promociu"

#: ../install_steps_interactive.pm_.c:89
msgid "Root Partition"
msgstr "Radikosubdisko"

#: ../install_steps_interactive.pm_.c:90
msgid "What is the root partition (/) of your system?"
msgstr "Kiu estas la radikosubdisko (/) �e via sistemo?"

#: ../install_steps_interactive.pm_.c:100
msgid "Recommended"
msgstr "Rekomendata"

#: ../install_steps_interactive.pm_.c:101
msgid "Customized"
msgstr "Akomodata"

#: ../install_steps_interactive.pm_.c:102
msgid "Expert"
msgstr "Spertulo"

#: ../install_steps_interactive.pm_.c:104
#: ../install_steps_interactive.pm_.c:118
msgid "Install Class"
msgstr "Instalklaso"

#: ../install_steps_interactive.pm_.c:105
msgid "What installation class do you want?"
msgstr "Kiun instalklason deziras vi?"

#: ../install_steps_interactive.pm_.c:114
msgid "Normal"
msgstr "Normala"

#: ../install_steps_interactive.pm_.c:115
msgid "Development"
msgstr "Programisto"

#: ../install_steps_interactive.pm_.c:116
msgid "Server"
msgstr "Servilo"

#: ../install_steps_interactive.pm_.c:119
msgid "What usage do you want?"
msgstr "Kiun uzado deziras vi?"

#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
msgid "What is the type of your mouse?"
msgstr "Kiun speco de muso havas vi?"

#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
msgid "Mouse Port"
msgstr "Muspordo"

#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
msgid "Which serial port is your mouse connected to?"
msgstr "Al kiu seria pordo estas via muso konektata?"

#: ../install_steps_interactive.pm_.c:157
msgid "no available partitions"
msgstr "neniuj haveblaj subdiskoj"

#: ../install_steps_interactive.pm_.c:159
#, c-format
msgid "(%dMb)"
msgstr "(%dmb)"

#: ../install_steps_interactive.pm_.c:166
msgid "Which partition do you want to use as your root partition"
msgstr "Kiun subdiskon vi deziras uzi kiel via radika subdisko"

#: ../install_steps_interactive.pm_.c:173
msgid "Choose the mount points"
msgstr "Elektu surmetingojn"

#: ../install_steps_interactive.pm_.c:185
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Vi bezonas restarti por la �an�oj al la subdisktabelo efektivigi"

#: ../install_steps_interactive.pm_.c:207
msgid "Choose the partitions you want to format"
msgstr "Elektu la subdiskoj kiuj vi deziras formati"

#: ../install_steps_interactive.pm_.c:211
msgid "Check bad blocks?"
msgstr ""

#: ../install_steps_interactive.pm_.c:230
msgid "Looking for available packages"
msgstr "Ser�as haveblajn paka�ojn"

#: ../install_steps_interactive.pm_.c:236
msgid "Finding packages to upgrade"
msgstr "Trovadas paka�ojn por promocii"

#: ../install_steps_interactive.pm_.c:266
#, c-format
msgid ""
"You need %dMB for a full install of the groups you selected.\n"
"You can go on anyway, but be warned that you won't get all packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:290
msgid "Package Group Selection"
msgstr "Elektado de Paka�aj Grupoj"

#: ../install_steps_interactive.pm_.c:326
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instalas paka�o %s\n"
"%d%%"

#: ../install_steps_interactive.pm_.c:335
msgid "Post install configuration"
msgstr "Post-instala konfigurado"

#: ../install_steps_interactive.pm_.c:346
msgid "Keep the current IP configuration"
msgstr "Retenu la nunan IP-an konfigura�on"

#: ../install_steps_interactive.pm_.c:347
msgid "Reconfigure network now"
msgstr "Rekonfiguru reton nun"

#: ../install_steps_interactive.pm_.c:348
#: ../install_steps_interactive.pm_.c:360
msgid "Do not set up networking"
msgstr "Ne konfiguru reton"

#: ../install_steps_interactive.pm_.c:350
#: ../install_steps_interactive.pm_.c:358
msgid "Network Configuration"
msgstr "Reta Konfigura�o"

#: ../install_steps_interactive.pm_.c:351
msgid "Local networking has already been configured. Do you want to:"
msgstr "Loka Reto jam estas konfigurita.  �u vi deziras:"

#: ../install_steps_interactive.pm_.c:359
msgid "Do you want to configure networking for your system?"
msgstr "�u vi deziras konfiguri reton por via sistemo?"

#: ../install_steps_interactive.pm_.c:360
msgid "Dialup with modem"
msgstr "Telefona konekto kun modemo"

#: ../install_steps_interactive.pm_.c:360
msgid "Local LAN"
msgstr "Loka Reto"

#: ../install_steps_interactive.pm_.c:369
msgid "no network card found"
msgstr "Neniu retkarto trovita"

#: ../install_steps_interactive.pm_.c:399
#: ../install_steps_interactive.pm_.c:400
#, c-format
msgid "Configuring network device %s"
msgstr "Konfiguras retan aparaton %s"

#: ../install_steps_interactive.pm_.c:401
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Bonvole enigu la IP-an konfigur�jon por �i tiu komputilo.\n"
"�iu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
"(ekzemple, 1.2.3.4)."

#: ../install_steps_interactive.pm_.c:404
msgid "Automatic IP"
msgstr "A�tomata IP"

#: ../install_steps_interactive.pm_.c:404
msgid "IP address:"
msgstr "IP-adreso:"

#: ../install_steps_interactive.pm_.c:404
msgid "Netmask:"
msgstr "Retmasko:"

#: ../install_steps_interactive.pm_.c:405
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adreso devus esti en la notacio 1.2.3.4"

#: ../install_steps_interactive.pm_.c:429
msgid "Configuring network"
msgstr "Konfiguras reto"

#: ../install_steps_interactive.pm_.c:430
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Bonvole enigu vian po�tejon.\n"
"Via po�tejo devus esti plene specifita po�tejo,\n"
"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
"Vi anka� povas enigi la IP-adreson de la prokura kluzo se via havas unu."

#: ../install_steps_interactive.pm_.c:434
msgid "DNS server:"
msgstr "DNA servilo:"

#: ../install_steps_interactive.pm_.c:434
msgid "Gateway device:"
msgstr "Prokura kluzaparato:"

#: ../install_steps_interactive.pm_.c:434
msgid "Gateway:"
msgstr "Kluzo:"

#: ../install_steps_interactive.pm_.c:434
msgid "Host name:"
msgstr "Po�tejo:"

#: ../install_steps_interactive.pm_.c:447
msgid "Try to find a modem?"
msgstr "Provu trovi modemon?"

#: ../install_steps_interactive.pm_.c:457
msgid "Which serial port is your modem connected to?"
msgstr "Al kiu seria pordo estas via modemo konektata?"

#: ../install_steps_interactive.pm_.c:462
msgid "Dialup options"
msgstr "Telefon-konektaj opcioj"

#: ../install_steps_interactive.pm_.c:463
msgid "Connection name"
msgstr "Nomo de konekto"

#: ../install_steps_interactive.pm_.c:464
msgid "Phone number"
msgstr "Telefonnumero"

#: ../install_steps_interactive.pm_.c:465
msgid "Login ID"
msgstr "Salutnomo"

#: ../install_steps_interactive.pm_.c:466
#: ../install_steps_interactive.pm_.c:578
#: ../install_steps_interactive.pm_.c:624
#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40
msgid "Password"
msgstr "Pasvorto"

#: ../install_steps_interactive.pm_.c:467
msgid "Authentication"
msgstr "A�tentikigado"

#: ../install_steps_interactive.pm_.c:467
msgid "CHAP"
msgstr "CHAP (Postula Manprema A�tentikigada Protokolo)"

#: ../install_steps_interactive.pm_.c:467
msgid "PAP"
msgstr "PAP (Pasvorta A�tentikigada Protokolo)"

#: ../install_steps_interactive.pm_.c:467
msgid "Script-based"
msgstr "Programeto-bazata"

#: ../install_steps_interactive.pm_.c:467
msgid "Terminal-based"
msgstr "Finaparato-bazata"

#: ../install_steps_interactive.pm_.c:468
msgid "Domain name"
msgstr "Domajna nomo"

#: ../install_steps_interactive.pm_.c:469
msgid "First DNS Server"
msgstr "Unu DNA-a Servilo"

#: ../install_steps_interactive.pm_.c:470
msgid "Second DNS Server"
msgstr "Dua DNA Servilo"

#: ../install_steps_interactive.pm_.c:483
msgid "Bringing up the network"
msgstr "Startado de la reto"

#: ../install_steps_interactive.pm_.c:492
#, fuzzy
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
"respect the provision of these applicable laws, he/they will incur serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Nun vi havas la �ancon el�uti softvaron por �ifrado.\n"
"\n"
"AVERTO:\n"
"\n"
"Pro malsamaj �eneralaj kondi�oj aplikeblaj al �i tiu softvaro kaj trudata\n"
"de diversaj jurisdikcioj, la kliento kaj/a� fina uzanto de tiu softvaro\n"
"devus certigi ke la le�oj de lia/ilia jurisdikcio permesas li/ili el�uti,\n"
"stoki kaj/a� uzi tiun softvaron.\n"
"\n"
"Plue, la kliento kaj/a� fina uzanto scios specife atentos ne malobei la\n"
"le�ojn de lia/ilia jurisdikcio.  Se la kliento kaj/a� la fina uzanto\n"
"malobeas tiujn aplikeblajn le�ojn, li/ili altiros sur sin gravajn "
"sankciojn.\n"
"\n"
"Neniuokaze a� Mandrakesoft a� �iaj fabrikistoj responsigos por specialaj,\n"
"nerektaj a� hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
"perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
"aliaj monaj malprofitoj, kaj rezultaj �uldoj kaj indemizo pagenda konforme\n"
"al priju�o) rezulte el uzado, posedado, a� sole el�utado de tiu softvaro, "
"al\n"
"kiu la kliento kaj/a� fina uzanto ne povis atingi post subskribi la nunan\n"
"kontrakton.\n"
"\n"
"Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../install_steps_interactive.pm_.c:523
msgid "Choose a mirror from which to get the packages"
msgstr "Elektu spegulon de kiu havigi la paka�ojn"

#: ../install_steps_interactive.pm_.c:528
msgid "Contacting the mirror to get the list of available packages"
msgstr "Kontaktu la spegulon por havigi la liston de havebla paka�oj"

#: ../install_steps_interactive.pm_.c:532
msgid "Which packages do you want to install"
msgstr "Kiujn paka�ojn vi deziras instali?"

#: ../install_steps_interactive.pm_.c:534
msgid "Downloading cryptographic packages"
msgstr "El�utas kritografiajn paka�ojn"

#: ../install_steps_interactive.pm_.c:544
msgid "Which is your timezone?"
msgstr "Kiu horzono estas via?"

#: ../install_steps_interactive.pm_.c:545
msgid "Is your hardware clock set to GMT?"
msgstr "�u via hardvara horlo�o estas �ustigata en GMT?"

#: ../install_steps_interactive.pm_.c:555
msgid "Printer"
msgstr "Printilo"

#: ../install_steps_interactive.pm_.c:556
msgid "Would you like to configure a printer?"
msgstr "�u vi deziras konfiguri printilon?"

#: ../install_steps_interactive.pm_.c:576
msgid "No password"
msgstr "Neniu pasvorto"

#: ../install_steps_interactive.pm_.c:576
#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74
#: ../interactive.pm_.c:84 ../interactive.pm_.c:164
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
#: ../my_gtk.pm_.c:525
msgid "Ok"
msgstr "Jeso"

#: ../install_steps_interactive.pm_.c:579
#: ../install_steps_interactive.pm_.c:625
#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41
msgid "Password (again)"
msgstr "Pasvorto (denove)"

#: ../install_steps_interactive.pm_.c:581
msgid "Use shadow file"
msgstr "Uzu ombran dosieron"

#: ../install_steps_interactive.pm_.c:581
msgid "shadow"
msgstr "ombro"

#: ../install_steps_interactive.pm_.c:582
msgid "MD5"
msgstr "MD5"

#: ../install_steps_interactive.pm_.c:582
msgid "Use MD5 passwords"
msgstr "Uzu MD5-ajn pasvortojn"

#: ../install_steps_interactive.pm_.c:584
msgid "Use NIS"
msgstr "Uzu NIS"

#: ../install_steps_interactive.pm_.c:584
msgid "yellow pages"
msgstr "flavaj pa�oj"

#: ../install_steps_interactive.pm_.c:588
#: ../install_steps_interactive.pm_.c:636
#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
msgid "Please try again"
msgstr "Bonvole provu denove"

#: ../install_steps_interactive.pm_.c:588
#: ../install_steps_interactive.pm_.c:636
#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52
msgid "The passwords do not match"
msgstr "La pasvortoj ne egalas"

#: ../install_steps_interactive.pm_.c:590
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr ""
"�i tiu pasvorto ests tro simpla (�i devas esti almena� %d signoj longa)"

#: ../install_steps_interactive.pm_.c:597
msgid "Authentification NIS"
msgstr "A�tentikigado NIS"

#: ../install_steps_interactive.pm_.c:598
msgid "NIS Domain"
msgstr "NIS Domajno"

#: ../install_steps_interactive.pm_.c:598
msgid "NIS Server"
msgstr "NIS Servilo"

#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
msgid "Accept user"
msgstr "Akceptu uzanto"

#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34
msgid "Add user"
msgstr "Aldonu uzanto"

#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
#, c-format
msgid "(already added %s)"
msgstr "(jam aldonis %s)"

#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Enigu uzanton\n"
"%s"

#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37
msgid "Real name"
msgstr "Vera nomo"

#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38
msgid "User name"
msgstr "Salutnomo"

#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43
msgid "Shell"
msgstr "�elo"

#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53
msgid "This password is too simple"
msgstr "�i tiu pasvorto estas tro simpla"

#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54
msgid "Please give a user name"
msgstr "Bonvole donu salutnomon"

#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"

#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56
msgid "This user name is already added"
msgstr "�i tiu salutnomo estas jam aldonita"

#: ../install_steps_interactive.pm_.c:659
msgid "First drive"
msgstr "Unua drajvo"

#: ../install_steps_interactive.pm_.c:660
msgid "Second drive"
msgstr "Dua drajvo"

#: ../install_steps_interactive.pm_.c:661
msgid "Skip"
msgstr "Ellasu"

#: ../install_steps_interactive.pm_.c:666
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO on your system, or another operating system removes LILO, or LILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
"sendepende de la normala start�argilo.  �i tiu estas utila se vi de deziras\n"
"instali LILO sur via sistemo, a� alia mastruma sistemo forigas LILO, a�\n"
"LILO ne funkcias kun via komputilo.  Akomodita startdisketo anka� povas\n"
"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani�i de severaj\n"
"sistemaj paneoj.  �u vi deziras krei startdisketo por via sistemo?"

#: ../install_steps_interactive.pm_.c:675
msgid "Sorry, no floppy drive available"
msgstr "Beda�rinde, neniu disketdrajvo havebla"

#: ../install_steps_interactive.pm_.c:678
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"

#: ../install_steps_interactive.pm_.c:683
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "En�ovu disketon en drajvo %s"

#: ../install_steps_interactive.pm_.c:684
#: ../install_steps_interactive.pm_.c:1042
msgid "Creating bootdisk"
msgstr "Kreas startdisketon"

#: ../install_steps_interactive.pm_.c:691
msgid "Preparing bootloader"
msgstr "Preparas start�argilon"

#: ../install_steps_interactive.pm_.c:703
msgid "First sector of boot partition"
msgstr "Unua sektoro de starta subdisko"

#: ../install_steps_interactive.pm_.c:703
msgid "First sector of drive (MBR)"
msgstr "Unu sektoro de drajvo (�efStartRikordo)"

#: ../install_steps_interactive.pm_.c:708
msgid "LILO Installation"
msgstr "LILO Instalado"

#: ../install_steps_interactive.pm_.c:709
msgid "Where do you want to install the bootloader?"
msgstr "Kie vi deziras instali la start�argilon?"

#: ../install_steps_interactive.pm_.c:715
msgid "Do you want to use LILO?"
msgstr "�u vi deziras uzi LILO?"

#: ../install_steps_interactive.pm_.c:718
msgid "Boot device"
msgstr "Starta aparato"

#: ../install_steps_interactive.pm_.c:719
msgid "Linear (needed for some SCSI drives)"
msgstr "Linia (bezonata por iom da SCSI drajvoj)"

#: ../install_steps_interactive.pm_.c:719
msgid "linear"
msgstr "linia"

#: ../install_steps_interactive.pm_.c:720
msgid "Compact"
msgstr "Kompakta"

#: ../install_steps_interactive.pm_.c:720
msgid "compact"
msgstr "kompakta"

#: ../install_steps_interactive.pm_.c:721
msgid "Delay before booting default image"
msgstr "Prokrastoperiodo anta� starti defa�ltan sistemon"

#: ../install_steps_interactive.pm_.c:722
msgid "Video mode"
msgstr "Grafika re�imo"

#: ../install_steps_interactive.pm_.c:726
msgid "Restrict command line options"
msgstr "Limigu komandliniajn opciojn"

#: ../install_steps_interactive.pm_.c:726
msgid "restrict"
msgstr "limigu"

#: ../install_steps_interactive.pm_.c:732
msgid "LILO main options"
msgstr "LILO �efaj opcioj"

#: ../install_steps_interactive.pm_.c:735
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"

#: ../install_steps_interactive.pm_.c:746
msgid ""
"Here are the following entries in LILO.\n"
"You can add some more or change the existing ones."
msgstr ""
"Jen la sekvantaj enskriboj en LILO.\n"
"Vi povas aldoni pli a� �an�i la ekzistantajn."

#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302
msgid "Add"
msgstr "Aldonu"

#: ../install_steps_interactive.pm_.c:757
msgid "Linux"
msgstr "Linukso"

#: ../install_steps_interactive.pm_.c:757
msgid "Other OS (windows...)"
msgstr "Alia Mastruma Sistemo (Vindozo...)"

#: ../install_steps_interactive.pm_.c:757
msgid "Which type of entry do you want to add"
msgstr "Kiun specon de enskribo vi deziras aldoni"

#: ../install_steps_interactive.pm_.c:777
msgid "Image"
msgstr "Kerna bildo"

#: ../install_steps_interactive.pm_.c:778
#: ../install_steps_interactive.pm_.c:786
msgid "Root"
msgstr "Radiko"

#: ../install_steps_interactive.pm_.c:779
msgid "Append"
msgstr "Alfiksu"

#: ../install_steps_interactive.pm_.c:780
msgid "Initrd"
msgstr "Initrd"

#: ../install_steps_interactive.pm_.c:781
msgid "Read-write"
msgstr "Lega-skriba"

#: ../install_steps_interactive.pm_.c:787
msgid "Table"
msgstr "Tabelo"

#: ../install_steps_interactive.pm_.c:788
msgid "Unsafe"
msgstr "Dan�era"

#: ../install_steps_interactive.pm_.c:793
msgid "Label"
msgstr "Etikedo"

#: ../install_steps_interactive.pm_.c:795
msgid "Default"
msgstr "Defa�lta"

#: ../install_steps_interactive.pm_.c:798
msgid "Remove entry"
msgstr "Forigu enskribon"

#: ../install_steps_interactive.pm_.c:801
msgid "Empty label not allowed"
msgstr "Malplena etikedo ne estas permesata"

#: ../install_steps_interactive.pm_.c:802
msgid "This label is already in use"
msgstr "�i tiu etikedo estas jam uzata"

#: ../install_steps_interactive.pm_.c:803
#, c-format
msgid "A entry %s already exists"
msgstr "Enskribon %s jam ekzistas"

#: ../install_steps_interactive.pm_.c:817
msgid "Installation of LILO failed. The following error occured:"
msgstr "Instalado de LILO malsukcesis.  La sekvanta eraro okazis:"

#: ../install_steps_interactive.pm_.c:831
msgid "Proxies configuration"
msgstr "Konfigurado de prokuraj serviloj"

#: ../install_steps_interactive.pm_.c:832
msgid "HTTP proxy"
msgstr "HTTP prokura servilo"

#: ../install_steps_interactive.pm_.c:833
msgid "FTP proxy"
msgstr "FTP prokura servilo"

#: ../install_steps_interactive.pm_.c:839
msgid "Proxy should be http://..."
msgstr "Prokura servilo devus esti http://..."

#: ../install_steps_interactive.pm_.c:840
msgid "Proxy should be ftp://..."
msgstr "Prokura servilo devus esti ftp://..."

#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20
msgid "Welcome To Crackers"
msgstr "Bonvenon Al Rompistoj"

#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21
msgid "Poor"
msgstr "Malbona"

#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22
msgid "Low"
msgstr "Malalta"

#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23
msgid "Medium"
msgstr "Meza"

#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24
msgid "High"
msgstr "Alta"

#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25
msgid "Paranoid"
msgstr "Paranoja"

#: ../install_steps_interactive.pm_.c:868
msgid "Miscellaneous questions"
msgstr "Diversaj demandoj"

#: ../install_steps_interactive.pm_.c:869
msgid "(may cause data corruption)"
msgstr "(eble ka�zos koruptadon de dateno)"

#: ../install_steps_interactive.pm_.c:869
msgid "Use hard drive optimisations?"
msgstr "Uzu drajvajn optimumiga�ojn?"

#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46
msgid "Choose security level"
msgstr "Elektu sekurnivelon?"

#: ../install_steps_interactive.pm_.c:871
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"

#: ../install_steps_interactive.pm_.c:872
msgid "Removable media automounting"
msgstr "A�tomata muntado de demetebla medio"

#: ../install_steps_interactive.pm_.c:874
msgid "Enable num lock at startup"
msgstr "Ebligu la \"Num Lock\"-an klavon je startado"

#: ../install_steps_interactive.pm_.c:877
msgid "Give the ram size in Mb"
msgstr "Donu kvanton de memoro en mb"

#: ../install_steps_interactive.pm_.c:905
#: ../install_steps_interactive.pm_.c:1075
msgid "Try to find PCI devices?"
msgstr "Provu trovi PCI-ajn drajvojn?"

#: ../install_steps_interactive.pm_.c:920
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Iuj pa�oj ne estas finitaj.\n"
"\n"
"�u vi vere deziras eliri nun?"

#: ../install_steps_interactive.pm_.c:927
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""
"Gratulojn, instalado estas finita.\n"
"Forigu la startdisketon kaj premu la Eniga klavo por restarti.\n"
"\n"
"Por informo pri riparoj kiuj estas havebla por �i tiu versio de Linuks-\n"
"Mandrejko, konsultu la erar-listo havebla de //www.linux-mandrake.com/.\n"
"\n"
"Informo pri konfiguri vian sistemon estas havebla en la post-instalada\n"
"�apitro de la Oficiala Linuks-Mandrejka Uzanta Gvidlibro."

#: ../install_steps_interactive.pm_.c:936
msgid "Shutting down"
msgstr "Haltas"

#: ../install_steps_interactive.pm_.c:950
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instalas pelilon por %s karto %s"

#: ../install_steps_interactive.pm_.c:951
#, c-format
msgid "(module %s)"
msgstr "(modulo %s)"

#: ../install_steps_interactive.pm_.c:961
#, c-format
msgid "Which %s driver should I try?"
msgstr "Kiun %s pelilon devus mi provi?"

#: ../install_steps_interactive.pm_.c:969
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Iuokaze, la pelilo bezonas havi aldonan informon por �uste funkcii,\n"
"kvankam �i normale funkcias bone sen la informo.  �u vi deziras specifi\n"
"aldonajn opciojn por �i a� permesi al la pelilo esplori vian komputilon\n"
"por la informo �i bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
"�i ne devus ka�zi difekton."

#: ../install_steps_interactive.pm_.c:974
msgid "Autoprobe"
msgstr "A�tomate esploru"

#: ../install_steps_interactive.pm_.c:974
msgid "Specify options"
msgstr "Specifu opciojn"

#: ../install_steps_interactive.pm_.c:978
#, c-format
msgid "You may now provide its options to module %s."
msgstr "Nun vi povas provizi �iajn opciojn al modulo %s."

#: ../install_steps_interactive.pm_.c:984
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Nun vi povas provizi �iajn opciojn al modulo %s.\n"
"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
"Ekzemple, ``io=0x300 irq=7''"

#: ../install_steps_interactive.pm_.c:987
msgid "Module options:"
msgstr "Modulaj opcioj:"

#: ../install_steps_interactive.pm_.c:997
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"�argado de modulo %s malsukcesis.\n"
"�u vi deziras trovi denove kun aliaj parametroj?"

#: ../install_steps_interactive.pm_.c:1010
msgid "Try to find PCMCIA cards?"
msgstr "�u vi deziras provi trovi PCMCIA kartojn?"

#: ../install_steps_interactive.pm_.c:1011
msgid "Configuring PCMCIA cards..."
msgstr "Konfiguras PCMCIA kartojn..."

#: ../install_steps_interactive.pm_.c:1011
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../install_steps_interactive.pm_.c:1018
msgid ""
"Linux does not yet fully support ultra dma 66 HPT.\n"
"As a work-around i can make a custom floppy giving access the hard drive on "
"ide2 and ide3"
msgstr ""
"Linukso ne jam tute subtenas \"ultra DMA 66 HPT\".\n"
"Provizore mi povas fari specialan disketon kiu donos atingon al la fiksita\n"
"drajvo �e ide2 kaj ide3."

#: ../install_steps_interactive.pm_.c:1039
msgid ""
"Enter a floppy to create an HTP enabled boot\n"
"(all data on floppy will be lost)"
msgstr ""
"En�ovu disketon por krei HTP-an ebligitan restartan disketon\n"
"(�iuj datenoj sur tiu disketo estos perdata)"

#: ../install_steps_interactive.pm_.c:1056
msgid "It is necessary to restart installation booting on the floppy"
msgstr "�i estas necesa rekomenci instaladon per restarti de la disketo"

#: ../install_steps_interactive.pm_.c:1057
msgid "It is necessary to restart installation with the new parameters"
msgstr "�i estas necesa rekomenci instaladon kun novaj parametroj"

#: ../install_steps_interactive.pm_.c:1061
#, c-format
msgid ""
"Failed to create an HTP boot floppy.\n"
"You may have to restart installation and give ``%s'' at the prompt"
msgstr ""
"Malsukcesis krei HTP-an restartan disketon.\n"
"Vi eble restartus instaladon kaj donus ``%s'' �e la prompto."

#: ../install_steps_interactive.pm_.c:1081
#, c-format
msgid "Found %s %s interfaces"
msgstr "Trovis %s %s interfacojn"

#: ../install_steps_interactive.pm_.c:1082
msgid "Do you have another one?"
msgstr "�u vi havas alian?"

#: ../install_steps_interactive.pm_.c:1083
#, c-format
msgid "Do you have any %s interface?"
msgstr "�u vi havas iun %s interfacon?"

#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
msgid "No"
msgstr "Ne"

#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424
msgid "Yes"
msgstr "Jes"

#: ../install_steps_interactive.pm_.c:1086
msgid "See hardware info"
msgstr "Vidu hardvaran informon"

#: ../install_steps_newt.pm_.c:19
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr "Linuks-Mandrejka Instalado %s"

#: ../install_steps_newt.pm_.c:30
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "

#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
msgid "Cancel"
msgstr "Nuligu"

#: ../interactive.pm_.c:181
msgid "Please wait"
msgstr "Bonvole atendu"

#: ../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Ambigueco (%s), esti pli preciza\n"

#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
#: ../interactive_stdio.pm_.c:70
msgid "Bad choice, try again\n"
msgstr "Malbona elekta�o, provu denove\n"

#: ../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (defa�lto estas %s) "

#: ../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "Via elekta�o? (defa�lo estas %s) "

#: ../interactive_stdio.pm_.c:71
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Via elekta�o (defa�lto estas %s  enigu `neniu' por elekti neniu) "

#: ../keyboard.pm_.c:88
msgid "Armenian"
msgstr "Armena"

#: ../keyboard.pm_.c:89
msgid "Belgian"
msgstr "Belga"

#: ../keyboard.pm_.c:90
msgid "Bulgarian"
msgstr "Bulgara"

#: ../keyboard.pm_.c:91
msgid "Brazilian"
msgstr "Brazila"

#: ../keyboard.pm_.c:92
msgid "Swiss (French layout)"
msgstr "Svisa (franca aran�o)"

#: ../keyboard.pm_.c:93
msgid "Swiss (German layout)"
msgstr "Svisa (germana aran�o)"

#: ../keyboard.pm_.c:94
msgid "Czech"
msgstr "�e�a"

#: ../keyboard.pm_.c:95
msgid "German"
msgstr "Germana"

#: ../keyboard.pm_.c:96
msgid "Danish"
msgstr "Dana"

#: ../keyboard.pm_.c:97
msgid "Dvorak"
msgstr "Dvorak-a"

#: ../keyboard.pm_.c:98
msgid "Estonian"
msgstr "Estona"

#: ../keyboard.pm_.c:99
msgid "Spanish"
msgstr "Hispana"

#: ../keyboard.pm_.c:100
msgid "Finnish"
msgstr "Finna"

#: ../keyboard.pm_.c:101
msgid "French"
msgstr "Franca"

#: ../keyboard.pm_.c:102
msgid "Georgian (\"Russian\" layout)"
msgstr "Kartvela (\"Rusa\" aran�o)"

#: ../keyboard.pm_.c:103
msgid "Georgian (\"Latin\" layout)"
msgstr "Kartvela (\"Latina\" aran�o)"

#: ../keyboard.pm_.c:104
msgid "Greek"
msgstr "Greka"

#: ../keyboard.pm_.c:105
msgid "Hungarian"
msgstr "Hungara"

#: ../keyboard.pm_.c:106
msgid "Israeli"
msgstr "Israela"

#: ../keyboard.pm_.c:107
msgid "Israeli (Phonetic)"
msgstr "Israela (fonetika)"

#: ../keyboard.pm_.c:108
msgid "Icelandic"
msgstr "Islanda"

#: ../keyboard.pm_.c:109
msgid "Italian"
msgstr "Itala"

#: ../keyboard.pm_.c:110
msgid "Latin American"
msgstr "Latinamerika"

#: ../keyboard.pm_.c:111
msgid "Dutch"
msgstr "Nederlanda"

#: ../keyboard.pm_.c:112
msgid "Lithuanian AZERTY"
msgstr "Litova AZERTY-a"

#: ../keyboard.pm_.c:113
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litova \"numero-vica\" QWERTY-a"

#: ../keyboard.pm_.c:114
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litova \"fonetika\" QWERTY-a"

#: ../keyboard.pm_.c:115
msgid "Norwegian"
msgstr "Norvega"

#: ../keyboard.pm_.c:116
#, fuzzy
msgid "Polish (qwerty layout)"
msgstr "Svisa (germana aran�o)"

#: ../keyboard.pm_.c:117
#, fuzzy
msgid "Polish (qwertz layout)"
msgstr "Svisa (germana aran�o)"

#: ../keyboard.pm_.c:118
msgid "Portuguese"
msgstr "Portugala"

#: ../keyboard.pm_.c:119
msgid "Canadian (Quebec)"
msgstr "Kanada (Kebeka)"

#: ../keyboard.pm_.c:120
msgid "Russian"
msgstr "Rusa"

#: ../keyboard.pm_.c:121
msgid "Russian (Yawerty)"
msgstr "Rusa (Yawerty-a)"

#: ../keyboard.pm_.c:122
msgid "Swedish"
msgstr "Sveda"

#: ../keyboard.pm_.c:123
msgid "Slovenian"
msgstr "Slovena"

#: ../keyboard.pm_.c:124
msgid "Slovakian"
msgstr "Slovaka"

#: ../keyboard.pm_.c:125
msgid "Thai keyboard"
msgstr "Taja klavaro"

#: ../keyboard.pm_.c:126
msgid "Turkish (traditional \"F\" model)"
msgstr "Turka (tradicia \"F\" modelo)"

#: ../keyboard.pm_.c:127
msgid "Turkish (modern \"Q\" model)"
msgstr "Turka (moderna \"Q\" modelo)"

#: ../keyboard.pm_.c:128
msgid "Ukrainian"
msgstr "Ukrajna"

#: ../keyboard.pm_.c:129
msgid "UK keyboard"
msgstr "Unui�inta Regna klavaro"

#: ../keyboard.pm_.c:130
msgid "US keyboard"
msgstr "Usona klavaro"

#: ../keyboard.pm_.c:131
msgid "US keyboard (international)"
msgstr "Usona klavaro (internacia)"

#: ../keyboard.pm_.c:132
msgid "Yugoslavian (latin layout)"
msgstr "Jugoslava (Latina aran�o)"

# NOTE: this message will be displayed by lilo at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
#: ../lilo.pm_.c:145
#, c-format
msgid ""
"Welcome to LILO the operating system chooser!\n"
"\n"
"To list the possible choices, press <TAB>.\n"
"\n"
"To load one of them, write its name and press <ENTER> or wait %d seconds for "
"default boot.\n"
"\n"
msgstr ""
"Bonvenon al LILO, la mastruma sistema elektilo!\n"
"\n"
"Por listigi la eblajn elektajxojn, premu <Tabo>.\n"
"\n"
"Por sxargi unu el ili, tajpu gxian nomon kaj premu <Enigu> aux atendu\n"
"dum %d sekundoj por defauxlta sistemo.\n"
"\n"

#: ../mouse.pm_.c:20
msgid "No Mouse"
msgstr "Neniu Muso"

#: ../mouse.pm_.c:21
msgid "Microsoft Rev 2.1A or higher (serial)"
msgstr "Mikrosofta Versia 2.1A a� pli alta (seria)"

#: ../mouse.pm_.c:22
msgid "Logitech CC Series (serial)"
msgstr "Lo�iteka CC serio (seria)"

#: ../mouse.pm_.c:23
msgid "Logitech MouseMan+/FirstMouse+ (serial)"
msgstr "Lo�iteka MouseMan+/FirstMouse+ (seria)"

#: ../mouse.pm_.c:24
msgid "ASCII MieMouse (serial)"
msgstr "Askia MieMouse (seria)"

#: ../mouse.pm_.c:25
msgid "Genius NetMouse (serial)"
msgstr "Genius NetMouse (seria)"

#: ../mouse.pm_.c:26
msgid "Microsoft IntelliMouse (serial)"
msgstr "Mikrosofta IntelliMouse (seria)"

#: ../mouse.pm_.c:27
msgid "MM Series (serial)"
msgstr "MM Serio (seria)"

#: ../mouse.pm_.c:28
msgid "MM HitTablet (serial)"
msgstr "MM HitTablet (seria)"

#: ../mouse.pm_.c:29
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Lo�iteka Muso (seria, malnova C7 speco)"

#: ../mouse.pm_.c:30
msgid "Logitech MouseMan/FirstMouse (serial)"
msgstr "Lo�iteka MouseMan/FirstMouse (seria)"

#: ../mouse.pm_.c:31
msgid "Generic Mouse (serial)"
msgstr "Nespecifa Muso (seria)"

#: ../mouse.pm_.c:32
msgid "Microsoft compatible (serial)"
msgstr "Mikrosoft-kongrua (seria)"

#: ../mouse.pm_.c:33
msgid "Generic 3 Button Mouse (serial)"
msgstr "Nespecifa 3 Butona Muso (seria)"

#: ../mouse.pm_.c:34
msgid "Mouse Systems (serial)"
msgstr "Mouse Systems (seria)"

#: ../mouse.pm_.c:35
msgid "Generic Mouse (PS/2)"
msgstr "Nespecifa Mouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:36
msgid "Logitech MouseMan/FirstMouse (ps/2)"
msgstr "Lo�iteka MouseMan/FirstMouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:37
msgid "Generic 3 Button Mouse (PS/2)"
msgstr "Nespecifa 3 Butona Muso (PS/2-a interfaco)"

#: ../mouse.pm_.c:38
msgid "ALPS GlidePoint (PS/2)"
msgstr "ALPS GlidePoint (PS/2-a interfaco)"

#: ../mouse.pm_.c:39
msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
msgstr "Lo�iteka MouseMan+/FirstMouse+ (PS/2-a interfaco)"

#: ../mouse.pm_.c:40
msgid "Kensington Thinking Mouse (PS/2)"
msgstr "Kensington Thinking Mouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:41
msgid "ASCII MieMouse (PS/2)"
msgstr "Askia MieMouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:42
msgid "Genius NetMouse (PS/2)"
msgstr "Genius NetMouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:43
msgid "Genius NetMouse Pro (PS/2)"
msgstr "Genius NetMouse Pro (PS/2-a interfaco)"

#: ../mouse.pm_.c:44
msgid "Genius NetScroll (PS/2)"
msgstr "Genius NetScroll (PS/2-a interfaco)"

#: ../mouse.pm_.c:45
msgid "Microsoft IntelliMouse (PS/2)"
msgstr "Mikrosofta IntelliMouse (PS/2-a interfaco)"

#: ../mouse.pm_.c:46
msgid "ATI Bus Mouse"
msgstr "ATI Busa Muso"

#: ../mouse.pm_.c:47
msgid "Microsoft Bus Mouse"
msgstr "Mikrosofta Busa Muso"

#: ../mouse.pm_.c:48
msgid "Logitech Bus Mouse"
msgstr "Lo�iteka Busa Muso"

#: ../mouse.pm_.c:49
msgid "USB Mouse"
msgstr "USB Muso"

#: ../mouse.pm_.c:50
msgid "USB Mouse (3 buttons or more)"
msgstr "USB Muso (3 butonoj a� pli)"

#: ../partition_table.pm_.c:486
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Vi havas truon en via subdisktabelo sed mi ne povas uzi �in.\n"
"La sola solvo estas movi viajn �efajn subdiskojn por situigi la truon\n"
"apud la etendataj subdiskoj."

#: ../partition_table.pm_.c:572
#, c-format
msgid "Error reading file %s"
msgstr "Eraro legante dosiero %s"

#: ../partition_table.pm_.c:579
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Resta�ris el dosiero %s malsukcesis: %s"

#: ../partition_table.pm_.c:581
msgid "Bad backup file"
msgstr "Malbona rezerva dosiero"

#: ../partition_table.pm_.c:602
#, c-format
msgid "Error writing to file %s"
msgstr "Eraro skribante al dosiero %s"

#: ../placeholder.pm_.c:5
msgid "Show less"
msgstr "Montru malpli"

#: ../placeholder.pm_.c:6
msgid "Show more"
msgstr "Montru pli"

#: ../printer.pm_.c:244
msgid "Local printer"
msgstr "Loka printilo"

#: ../printer.pm_.c:245
msgid "Remote lpd"
msgstr "Malproksima lpd"

#: ../printer.pm_.c:246
msgid "SMB/Windows 95/98/NT"
msgstr "SMB/Vindozo 95/98/NT"

#: ../printer.pm_.c:247
msgid "NetWare"
msgstr "NetWare"

#: ../printerdrake.pm_.c:75
msgid "Local Printer Options"
msgstr "Lokaj Printilaj Opcioj"

#: ../printerdrake.pm_.c:76
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue?"
msgstr ""
"�iuj printvico (al kiu printajn taskojn estas direktata) bezonas nomon\n"
"(ofte lp) kaj fonan eneligan dosierujon asociata kun �i.  Kiu nomo kaj\n"
"dosierujo devus uzata por �i tiu printvico?"

#: ../printerdrake.pm_.c:79
msgid "Name of queue:"
msgstr "Nomo de printvico:"

#: ../printerdrake.pm_.c:79
msgid "Spool directory:"
msgstr "Fona eneliga dosierujo:"

#: ../printerdrake.pm_.c:90
msgid "Select Printer Connection"
msgstr "Elektu Printilan Konekton"

#: ../printerdrake.pm_.c:91
msgid "How is the printer connected?"
msgstr "Kiel estas la printilo konektata?"

#: ../printerdrake.pm_.c:99
msgid "Detecting devices..."
msgstr "Detektas aparatojn..."

#: ../printerdrake.pm_.c:99
msgid "Test ports"
msgstr "Provu pordojn"

#: ../printerdrake.pm_.c:112
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "Printilo, tipo \"%s\", estas detektita �e "

#: ../printerdrake.pm_.c:119
msgid "Local Printer Device"
msgstr "Loka Printila Aparato"

#: ../printerdrake.pm_.c:120
msgid ""
"What device is your printer connected to  \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Al kiu aparato estas via printilo konektata\n"
"(notu ke /dev/lp0 egalas LPT1:)?\n"

#: ../printerdrake.pm_.c:121
msgid "Printer Device:"
msgstr "Printila Aparato:"

#: ../printerdrake.pm_.c:125
msgid "Remote lpd Printer Options"
msgstr "Malproksimaj lpd Printilaj Opcioj"

#: ../printerdrake.pm_.c:126
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""
"Por uzi malproksima lpd printvico, vi devas provizi la po�tejon de la\n"
"printservilo kaj la printviconomon �e tiu servilo en kiun taskoj devus\n"
"esti metata."

#: ../printerdrake.pm_.c:129
msgid "Remote hostname:"
msgstr "Malproksima po�tejo"

#: ../printerdrake.pm_.c:129
msgid "Remote queue"
msgstr "Malproksima printvico"

#: ../printerdrake.pm_.c:134
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"

#: ../printerdrake.pm_.c:135
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"Por printi al SMB-a printilo, vi devas provizi la SMB po�tejon (Notu! �i "
"eble\n"
"estas malsama de �ia TCP/IP nomo!) kaj eble la IP-adreson de la "
"printservilo,\n"
"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
"ta�gan salutnomon, pasvorton, kaj laborgrupan informon."

#: ../printerdrake.pm_.c:140
msgid "SMB server IP:"
msgstr "IP de SMB servilo:"

#: ../printerdrake.pm_.c:140
msgid "SMB server host:"
msgstr "Po�tejo de SMB servilo:"

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "Password:"
msgstr "Pasvorto:"

#: ../printerdrake.pm_.c:141
msgid "Share name:"
msgstr "Opuza nomo:"

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "User name:"
msgstr "Salutnomo:"

#: ../printerdrake.pm_.c:142
msgid "Workgroup:"
msgstr "Laborgrupo:"

#: ../printerdrake.pm_.c:157
msgid "NetWare Printer Options"
msgstr "NetWare Printilaj Opcioj"

#: ../printerdrake.pm_.c:158
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
"nomon (Notu! �i eble estas malsama de �ia TCP/IP nomo!) aldone al la\n"
"printvican nomon por la printilo vi deziras atingi kaj iun ajn ta�gan\n"
"salutnomon kaj pasvorton."

#: ../printerdrake.pm_.c:162
msgid "Print Queue Name:"
msgstr "Printvica Nomo:"

#: ../printerdrake.pm_.c:162
msgid "Printer Server:"
msgstr "Printservilo:"

#: ../printerdrake.pm_.c:173
msgid "Yes, print ASCII test page"
msgstr "Jes, printu Askian provpa�on"

#: ../printerdrake.pm_.c:174
msgid "Yes, print PostScript test page"
msgstr "Jes, printu PostSkriban provpa�on"

#: ../printerdrake.pm_.c:175
msgid "Yes, print both test pages"
msgstr "Jes, printu amba� de la provpa�ojn"

#: ../printerdrake.pm_.c:183
msgid "Configure Printer"
msgstr "Konfiguru Printilon"

#: ../printerdrake.pm_.c:184
msgid "What type of printer do you have?"
msgstr "Kiun specon de printilo vi havas?"

#: ../printerdrake.pm_.c:204
msgid "Printer options"
msgstr "Printilaj opcioj"

#: ../printerdrake.pm_.c:205
msgid "Paper Size"
msgstr "Papergrandeco"

#: ../printerdrake.pm_.c:206
msgid "Eject page after job?"
msgstr "El�etu pa�on post tasko?"

#: ../printerdrake.pm_.c:209
msgid "Fix stair-stepping text?"
msgstr "Riparu �tuparan tekston?"

#: ../printerdrake.pm_.c:212
msgid "Uniprint driver options"
msgstr "Uniprint-aj pelilaj opcioj"

#: ../printerdrake.pm_.c:213
msgid "Color depth options"
msgstr "Kolorprofunecaj opcioj"

#: ../printerdrake.pm_.c:223
msgid "Do you want to test printing?"
msgstr "�u vi deziras provi printado?"

#: ../printerdrake.pm_.c:234
msgid "Printing test page(s)..."
msgstr "Printas provpa�o(j)n..."

#: ../printerdrake.pm_.c:252
#, c-format
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Printing status:\n"
"%s\n"
"\n"
"Does it work properly?"
msgstr ""
"Provpa�o(j)n estis sendataj al la printila demono.\n"
"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
"Printada stato:\n"
"%s\n"
"\n"
"�u �i �uste funkcias?"

#: ../printerdrake.pm_.c:256
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Does it work properly?"
msgstr ""
"Provpa�o(j)n estis sendataj al la printila demono.\n"
"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
"�u �i �uste funkcias?"

#: ../raid.pm_.c:36
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"

#: ../raid.pm_.c:106
msgid "Can't write file $file"
msgstr "Ne povas skribi dosieron $file."

#: ../raid.pm_.c:146
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ne estas sufi�aj subdiskoj por RAID nivelo %d\n"

#: ../standalone/draksec_.c:28
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"vi devus uzi �i tiun nivelon zorge. �i faras vian komputilon pli facila\n"
"por uzi, sed delikatega: vi devus neniam uzi �i surrete.\n"
"�i ne havas pasvortojn."

#: ../standalone/draksec_.c:31
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankora�\n"
"ne rekomendita."

#: ../standalone/draksec_.c:32
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"Malmultaj plibonigoj �e �i tiu sekurnivelo, la �efa estas ke �i havas pli\n"
"multajn sekurecajn avertojn kaj kontrolojn."

#: ../standalone/draksec_.c:34
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"�i tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."

#: ../standalone/draksec_.c:36
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"Kun �i tiu sekurnivelo, uzado de �i tiu komputilo kiel servilo ebli�as.\n"
"La sekureco nun estas sufi�e alta por uzi la sistemon kiel servilo kiu\n"
"akceptas konektojn de multaj klientoj."

#: ../standalone/draksec_.c:39
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
"malfermita.  Sekurecaj aspektoj estas �e iliaj maksimumoj."

#: ../standalone/draksec_.c:49
msgid "Setting security level"
msgstr "Elektas sekurnivelon"

#: ../standalone/drakxconf_.c:21
msgid "Choose the tool you want to use"
msgstr "Elektu la ilon kiun vi deziras instali"

#: ../standalone/drakxservices_.c:21
msgid "Choose which services should be automatically started at boot time"
msgstr "Elektu kiujn servojn devus a�tomate startata �e starta tempo"

#: ../standalone/mousedrake_.c:30
msgid "no serial_usb found\n"
msgstr "neniu serial_usb (seria USB) trovita\n"

#: ../standalone/mousedrake_.c:35
msgid "Emulate third button?"
msgstr "�u vi deziras emuli trian musbutonon?"

#: ../standalone/rpmdrake_.c:25
msgid "reading configuration"
msgstr "Legas konfigura�on"

#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50
#: ../standalone/rpmdrake_.c:253
msgid "File"
msgstr "Dosiero"

#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229
#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269
msgid "Search"
msgstr "Ser�u"

#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56
msgid "Package"
msgstr "Paka�o"

#: ../standalone/rpmdrake_.c:51
msgid "Text"
msgstr "Teksto"

#: ../standalone/rpmdrake_.c:53
msgid "Tree"
msgstr "Arbo"

#: ../standalone/rpmdrake_.c:54
msgid "Sort by"
msgstr "Ordigu la�"

#: ../standalone/rpmdrake_.c:55
msgid "Category"
msgstr "Kategorio"

#: ../standalone/rpmdrake_.c:58
msgid "See"
msgstr "Vidu"

#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163
msgid "Installed packages"
msgstr "Instalitaj paka�oj"

#: ../standalone/rpmdrake_.c:60
msgid "Available packages"
msgstr "Haveblaj paka�oj"

#: ../standalone/rpmdrake_.c:62
msgid "Show only leaves"
msgstr "Montru nur foliojn"

#: ../standalone/rpmdrake_.c:67
msgid "Expand all"
msgstr "Etendu �ion"

#: ../standalone/rpmdrake_.c:68
msgid "Collapse all"
msgstr "Maletendu �ion"

#: ../standalone/rpmdrake_.c:70
msgid "Configuration"
msgstr "Konfigura�on"

#: ../standalone/rpmdrake_.c:71
msgid "Add location of packages"
msgstr "Aldonu lokon de paka�oj"

#: ../standalone/rpmdrake_.c:75
msgid "Update location"
msgstr "�isdatigu lokon"

#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328
msgid "Remove"
msgstr "Forigu"

#: ../standalone/rpmdrake_.c:100
msgid "Configuration: Add Location"
msgstr "Konfigurado: Aldonu Lokon"

#: ../standalone/rpmdrake_.c:101
msgid "Expand Tree"
msgstr "Etendu Arbon"

#: ../standalone/rpmdrake_.c:102
msgid "Collapse Tree"
msgstr "Maletendu Arbon"

#: ../standalone/rpmdrake_.c:103
msgid "Find Package"
msgstr "Trovu paka�on"

#: ../standalone/rpmdrake_.c:104
msgid "Find Package containing file"
msgstr "Trovu Paka�on kiu enhavas dosieron"

#: ../standalone/rpmdrake_.c:105
msgid "Toggle between Installed and Available"
msgstr "�altu inter Instalita kaj Havebla"

#: ../standalone/rpmdrake_.c:139
msgid "Files:\n"
msgstr "Dosieroj:\n"

#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209
msgid "Uninstall"
msgstr "Malinstalu"

#: ../standalone/rpmdrake_.c:163
msgid "Choose package to install"
msgstr "Elektu paka�on por instali"

#: ../standalone/rpmdrake_.c:190
msgid "Checking dependencies"
msgstr "Kontrolas dependa�ojn"

#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409
msgid "Wait"
msgstr "Atendu"

#: ../standalone/rpmdrake_.c:209
msgid "The following packages are going to be uninstalled"
msgstr "La sekvaj paka�oj estos malinstalataj"

#: ../standalone/rpmdrake_.c:210
msgid "Uninstalling the RPMs"
msgstr "Malinstalas la RPM-ajn dosierojn"

#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269
msgid "Regexp"
msgstr "Regula Esprimo"

#: ../standalone/rpmdrake_.c:229
msgid "Which package are looking for"
msgstr "Kiun paka�on vi ser�as?"

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
#, c-format
msgid "%s not found"
msgstr "%s ne trovita"

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
msgid "No match"
msgstr "Neniu egala�on"

#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262
#: ../standalone/rpmdrake_.c:278
msgid "No more match"
msgstr "Neniuj pluaj egala�oj"

#: ../standalone/rpmdrake_.c:246
msgid ""
"rpmdrake is currently in ``low memory'' mode.\n"
"I'm going to relaunch rpmdrake to allow searching files"
msgstr ""
"rpmdrake estas nune en la re�imo de ``nesufi�a-memoro''.\n"
"Mi restartos rpmdrake por permesi ser�i dosierojn."

#: ../standalone/rpmdrake_.c:253
msgid "Which file are you looking for"
msgstr "Kiun dosieron vi ser�as?"

#: ../standalone/rpmdrake_.c:269
msgid "What are looking for"
msgstr "Kion vi ser�as?"

#: ../standalone/rpmdrake_.c:289
msgid "Give a name (eg: `extra', `commercial')"
msgstr "Donu nomon (ekz-e `ekstra', `komerca')"

#: ../standalone/rpmdrake_.c:291
msgid "Directory"
msgstr "Dosierujo"

#: ../standalone/rpmdrake_.c:294
msgid "No cdrom available (nothing in /mnt/cdrom)"
msgstr "Neniu KD-ROMo havebla (neniu en /mnt/cdrom)"

#: ../standalone/rpmdrake_.c:298
msgid "URL of the directory containing the RPMs"
msgstr "URL por la dosierujo kiu enhavas la RPM-ajn dosierojn"

#: ../standalone/rpmdrake_.c:299
msgid ""
"For FTP and HTTP, you need to give the location for hdlist\n"
"It must be relative to the URL above"
msgstr ""
"Por FTP kaj HTTP, vi bezonas doni la lokon por hdlist-o.\n"
"�i devas esti relativa al la supra URL-o."

#: ../standalone/rpmdrake_.c:302
msgid "Please submit the following information"
msgstr "Bonvole liveru la sekvantan informon"

#: ../standalone/rpmdrake_.c:304
#, c-format
msgid "%s is already in use"
msgstr "%s estas jam uzata"

#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321
#: ../standalone/rpmdrake_.c:329
msgid "Updating the RPMs base"
msgstr "�isdatigas la bazon de RPM-aj dosieroj"

#: ../standalone/rpmdrake_.c:328
#, c-format
msgid "Going to remove entry %s"
msgstr "Forigos enskribon %s"

#: ../standalone/rpmdrake_.c:360
msgid "Finding leaves"
msgstr "Trovas foliojn"

#: ../standalone/rpmdrake_.c:360
msgid "Finding leaves takes some time"
msgstr "Trovi foliojn bezonas iom da tempo"

#~ msgid "Polish"
#~ msgstr "Pola"

#~ msgid "Going to install %d MB. You can choose to install more programs"
#~ msgstr "Instalos %d mb.  Vi povos elekti instali pli da programoj"

#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
#~ msgstr "Vi elektis tro multajn paka�ojn: %dMB ne sidas en %dMB"