# Esperanto drakbootdisk
# Copyright (C) 2000, 2001 Mandrakesoft
# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2002-12-05 19:52+0100\n"
"PO-Revision-Date: 2001-08-22 19:15-0500\n"
"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
"Language-Team: Esperanto <eo@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-3\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfig/card.pm_.c:16
msgid "256 kB"
msgstr "256 KB"

#: ../../Xconfig/card.pm_.c:17
msgid "512 kB"
msgstr "512 KB"

#: ../../Xconfig/card.pm_.c:18
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfig/card.pm_.c:19
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfig/card.pm_.c:20
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfig/card.pm_.c:21
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfig/card.pm_.c:22
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfig/card.pm_.c:23
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfig/card.pm_.c:24
msgid "64 MB or more"
msgstr "64 MB a� pli"

#: ../../Xconfig/card.pm_.c:203
msgid "Choose a X server"
msgstr "Elektu X servilon"

#: ../../Xconfig/card.pm_.c:203
msgid "X server"
msgstr "X servilo"

#: ../../Xconfig/card.pm_.c:230
msgid "Multi-head configuration"
msgstr "Plur-ekrana konfigura�o"

#: ../../Xconfig/card.pm_.c:231
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""

#: ../../Xconfig/card.pm_.c:288
msgid "Select the memory size of your graphics card"
msgstr "Elektu memorkapaciton de via grafika karto"

#: ../../Xconfig/card.pm_.c:349
msgid "XFree configuration"
msgstr "XFree Konfigurado"

#: ../../Xconfig/card.pm_.c:351
msgid "Which configuration of XFree do you want to have?"
msgstr "Kiun konfiguron de XFree vi deziras havi?"

#: ../../Xconfig/card.pm_.c:383
msgid "Configure all heads independently"
msgstr ""

#: ../../Xconfig/card.pm_.c:384
msgid "Use Xinerama extension"
msgstr ""

#: ../../Xconfig/card.pm_.c:389
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "ISDN-a Konfigura�on"

#: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s kun 3D aparata akcelado"

#: ../../Xconfig/card.pm_.c:416
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."

#: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."

#: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"

#: ../../Xconfig/card.pm_.c:429
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
"NOTU KE �I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
"KOMPUTILON.\n"
"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."

#: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
"NOTU KE �I TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."

#: ../../Xconfig/card.pm_.c:455
msgid "Xpmac (installation display driver)"
msgstr ""

#: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77
#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961
msgid "Custom"
msgstr "Akomodata"

#: ../../Xconfig/main.pm_.c:102
#, fuzzy
msgid "Graphic Card"
msgstr "Grafika karto"

#: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93
msgid "Monitor"
msgstr "Ekrano"

#: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210
msgid "Resolution"
msgstr "Distingivo"

#: ../../Xconfig/main.pm_.c:113
msgid "Test"
msgstr ""

#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67
#: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25
#: ../../diskdrake/smbnfs_gtk.pm_.c:86
msgid "Options"
msgstr "Opcioj"

#: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269
#: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274
#: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142
#: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104
#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159
#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181
#: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015
#: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435
#: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949
msgid "Ok"
msgstr "Jeso"

#: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28
#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114
#: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204
msgid "Quit"
msgstr "�esu"

#: ../../Xconfig/main.pm_.c:145
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"�u vi deziras teni la �an�ojn?\n"
"Nuna konfiguro estas:\n"
"\n"
"%s"

#: ../../Xconfig/monitor.pm_.c:93
msgid "Choose a monitor"
msgstr "Elektu ekranon"

#: ../../Xconfig/monitor.pm_.c:97
msgid "Plug'n Play"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46
msgid "Generic"
msgstr "Genera"

#: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67
#: ../../standalone/harddrake2_.c:68
#, fuzzy
msgid "Vendor"
msgstr "Malfaru"

#: ../../Xconfig/monitor.pm_.c:109
msgid "Plug'n Play probing failed. Please choose a precise monitor"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:114
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"La du gravegaj parametroj estas la vertikala refre�igrapido (vertical\n"
"refresh rate) kiu estas la rapido por refre�igi la tutan ekranon, kaj\n"
"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
"la rapido por montri skanliniojn.\n"
"\n"
"�i estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."

#: ../../Xconfig/monitor.pm_.c:121
msgid "Horizontal refresh rate"
msgstr "Horizontala sinkronrapido (horizontal sync rate)"

#: ../../Xconfig/monitor.pm_.c:122
msgid "Vertical refresh rate"
msgstr "Vertikala refre�igrapido (vertical refresh rate)"

#: ../../Xconfig/resolution_and_depth.pm_.c:12
msgid "256 colors (8 bits)"
msgstr "256 koloroj (8 bitoj)"

#: ../../Xconfig/resolution_and_depth.pm_.c:13
msgid "32 thousand colors (15 bits)"
msgstr "32 mil koloroj (15 bitoj)"

#: ../../Xconfig/resolution_and_depth.pm_.c:14
msgid "65 thousand colors (16 bits)"
msgstr "65 mil koloroj (16 bitoj)"

#: ../../Xconfig/resolution_and_depth.pm_.c:15
msgid "16 million colors (24 bits)"
msgstr "16 milionoj koloroj (24 bitoj)"

#: ../../Xconfig/resolution_and_depth.pm_.c:16
msgid "4 billion colors (32 bits)"
msgstr "4 miliardoj koloroj (32 bitoj)"

#: ../../Xconfig/resolution_and_depth.pm_.c:130
msgid "Resolutions"
msgstr "Distingivoj"

#: ../../Xconfig/resolution_and_depth.pm_.c:255
msgid "Choose the resolution and the color depth"
msgstr "Elektu distingivon kaj kolorprofundon"

#: ../../Xconfig/resolution_and_depth.pm_.c:256
#, c-format
msgid "Graphics card: %s"
msgstr "Grafika karto: %s"

#: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001
#: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87
#: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463
#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345
#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287
#: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055
#: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198
#: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907
#: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960
#: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047
#: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104
#: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112
#: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286
#: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677
#: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918
#: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204
#: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295
#: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438
#: ../../ugtk2.pm_.c:926
msgid "Cancel"
msgstr "Nuligu"

#: ../../Xconfig/test.pm_.c:29
msgid "Test of the configuration"
msgstr "Provu konfigura�on"

#: ../../Xconfig/test.pm_.c:30
msgid "Do you want to test the configuration?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../Xconfig/test.pm_.c:30
#, fuzzy
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Averto: provado de �i tiu grafika karto eble svenigos vian komputilon"

#: ../../Xconfig/various.pm_.c:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Klavara aran�o: %s\n"

#: ../../Xconfig/various.pm_.c:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Speco de muso: %s\n"

#: ../../Xconfig/various.pm_.c:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Musaparato: %s\n"

#: ../../Xconfig/various.pm_.c:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Ekrano: %s\n"

#: ../../Xconfig/various.pm_.c:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"

#: ../../Xconfig/various.pm_.c:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Ekrana vertikala refre�igrapido (vertical refresh rate): %s\n"

#: ../../Xconfig/various.pm_.c:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafika karto: %s\n"

#: ../../Xconfig/various.pm_.c:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Graifka memoro: %s KB\n"

#: ../../Xconfig/various.pm_.c:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Kolorprofuneco: %s\n"

#: ../../Xconfig/various.pm_.c:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Distingivo: %s\n"

#: ../../Xconfig/various.pm_.c:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 servilo: %s\n"

#: ../../Xconfig/various.pm_.c:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 pelilo: %s\n"

#: ../../Xconfig/various.pm_.c:61
msgid "Graphical interface at startup"
msgstr "X Fenestro �e komenco"

#: ../../Xconfig/various.pm_.c:62
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Mi povas konfiguri vian komputilon tiel ke �i a�tomate lan�os X kiam �i\n"
"ekfunkcias.  �u vi deziras ke X a�tomate lan�os?"

#: ../../Xconfig/various.pm_.c:73
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: ../../Xconfig/various.pm_.c:85
#, fuzzy
msgid "What norm is your TV using?"
msgstr "Kia estas via ISDN-a konekta�o?"

#: ../../any.pm_.c:107 ../../any.pm_.c:132
msgid "First sector of boot partition"
msgstr "Unua sektoro de starta subdisko"

#: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209
msgid "First sector of drive (MBR)"
msgstr "Unu sektoro de drajvo (�efStartRikordo)"

#: ../../any.pm_.c:111
msgid "SILO Installation"
msgstr "SILO Instalado"

#: ../../any.pm_.c:112 ../../any.pm_.c:125
msgid "Where do you want to install the bootloader?"
msgstr "Kie vi deziras instali la start�argilon?"

#: ../../any.pm_.c:124
msgid "LILO/grub Installation"
msgstr "LILO/grub Instalado"

#: ../../any.pm_.c:136 ../../any.pm_.c:150
msgid "SILO"
msgstr ""

#: ../../any.pm_.c:138
msgid "LILO with text menu"
msgstr ""

#: ../../any.pm_.c:139 ../../any.pm_.c:150
msgid "LILO with graphical menu"
msgstr ""

#: ../../any.pm_.c:142
msgid "Grub"
msgstr ""

#: ../../any.pm_.c:146
msgid "Boot from DOS/Windows (loadlin)"
msgstr ""

#: ../../any.pm_.c:148 ../../any.pm_.c:150
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:158 ../../any.pm_.c:189
msgid "Bootloader main options"
msgstr "Start�argilo �efaj opcioj"

#: ../../any.pm_.c:159 ../../any.pm_.c:190
msgid "Bootloader to use"
msgstr "Start�argilo por uzi"

#: ../../any.pm_.c:161
msgid "Bootloader installation"
msgstr "Start�argila instalado"

#: ../../any.pm_.c:163 ../../any.pm_.c:192
msgid "Boot device"
msgstr "Starta aparato"

#: ../../any.pm_.c:164
msgid "Compact"
msgstr "Kompakta"

#: ../../any.pm_.c:164
msgid "compact"
msgstr "kompakta"

#: ../../any.pm_.c:165 ../../any.pm_.c:289
msgid "Video mode"
msgstr "Grafika re�imo"

#: ../../any.pm_.c:167
msgid "Delay before booting default image"
msgstr "Prokrastoperiodo anta� starti defa�ltan sistemon"

#: ../../any.pm_.c:169 ../../any.pm_.c:772
#: ../../diskdrake/smbnfs_gtk.pm_.c:179
#: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71
#: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916
#: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622
#: ../../standalone/drakconnect_.c:647
msgid "Password"
msgstr "Pasvorto"

#: ../../any.pm_.c:170 ../../any.pm_.c:773
#: ../../install_steps_interactive.pm_.c:1078
msgid "Password (again)"
msgstr "Pasvorto (denove)"

#: ../../any.pm_.c:171
msgid "Restrict command line options"
msgstr "Limigu komandliniajn opciojn"

#: ../../any.pm_.c:171
msgid "restrict"
msgstr "limigu"

#: ../../any.pm_.c:173
msgid "Clean /tmp at each boot"
msgstr "Purigu /tmp dum �iuj startadoj"

#: ../../any.pm_.c:174
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"

#: ../../any.pm_.c:176
msgid "Enable multi profiles"
msgstr "Ebligu multoblajn profilojn"

#: ../../any.pm_.c:180
msgid "Give the ram size in MB"
msgstr "Donu kvanton de memoro en MB"

#: ../../any.pm_.c:182
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"

#: ../../any.pm_.c:183 ../../any.pm_.c:748
#: ../../diskdrake/interactive.pm_.c:1204
#: ../../install_steps_interactive.pm_.c:1072
msgid "Please try again"
msgstr "Bonvole provu denove"

#: ../../any.pm_.c:183 ../../any.pm_.c:748
#: ../../install_steps_interactive.pm_.c:1072
msgid "The passwords do not match"
msgstr "La pasvortoj ne egalas"

#: ../../any.pm_.c:191
msgid "Init Message"
msgstr ""

#: ../../any.pm_.c:193
msgid "Open Firmware Delay"
msgstr ""

#: ../../any.pm_.c:194
msgid "Kernel Boot Timeout"
msgstr ""

#: ../../any.pm_.c:195
msgid "Enable CD Boot?"
msgstr ""

#: ../../any.pm_.c:196
msgid "Enable OF Boot?"
msgstr ""

#: ../../any.pm_.c:197
msgid "Default OS?"
msgstr "Defa�lta Mastruma Sistemo?"

#: ../../any.pm_.c:231
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: ../../any.pm_.c:247
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can add some more or change the existing ones."
msgstr ""
"Jen la diversaj enskriboj.\n"
"Vi povas aldoni pli a� �an�i la ekzistantajn."

#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531
#: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953
#: ../../standalone/drakfont_.c:996
msgid "Add"
msgstr "Aldonu"

#: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68
#: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27
#: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153
#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726
msgid "Done"
msgstr "Finata"

#: ../../any.pm_.c:257
msgid "Modify"
msgstr "�an�u"

#: ../../any.pm_.c:265
msgid "Which type of entry do you want to add?"
msgstr "Kiun specon de enskribo vi deziras aldoni"

#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674
msgid "Linux"
msgstr "Linukso"

#: ../../any.pm_.c:266
msgid "Other OS (SunOS...)"
msgstr "Alia Mastruma Sistemo (SunOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (MacOS...)"
msgstr "Alia Mastruma Sistemo (MacOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (windows...)"
msgstr "Alia Mastruma Sistemo (Vindozo...)"

#: ../../any.pm_.c:285
msgid "Image"
msgstr "Kerna bildo"

#: ../../any.pm_.c:286 ../../any.pm_.c:297
msgid "Root"
msgstr "Radiko"

#: ../../any.pm_.c:287 ../../any.pm_.c:315
msgid "Append"
msgstr "Alfiksu"

#: ../../any.pm_.c:291
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:292
msgid "Read-write"
msgstr "Lega-skriba"

#: ../../any.pm_.c:299
msgid "Table"
msgstr "Tabelo"

#: ../../any.pm_.c:300
msgid "Unsafe"
msgstr "Dan�era"

#: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314
msgid "Label"
msgstr "Etikedo"

#: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215
msgid "Default"
msgstr "Defa�lta"

#: ../../any.pm_.c:316
msgid "Initrd-size"
msgstr "Initrd-grandeco"

#: ../../any.pm_.c:318
msgid "NoVideo"
msgstr ""

#: ../../any.pm_.c:326
msgid "Remove entry"
msgstr "Forigu enskribon"

#: ../../any.pm_.c:329
msgid "Empty label not allowed"
msgstr "Malplena etikedo ne estas permesata"

#: ../../any.pm_.c:330
msgid "You must specify a kernel image"
msgstr ""

#: ../../any.pm_.c:330
#, fuzzy
msgid "You must specify a root partition"
msgstr "Vi devas havi inter�an�an subdiskon"

#: ../../any.pm_.c:331
msgid "This label is already used"
msgstr "�i tiu etikedo estas jam uzata"

#: ../../any.pm_.c:640
#, c-format
msgid "Found %s %s interfaces"
msgstr "Trovis %s %s interfacojn"

#: ../../any.pm_.c:641
msgid "Do you have another one?"
msgstr "�u vi havas alian?"

#: ../../any.pm_.c:642
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "�u vi havas iun %s interfacon?"

#: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925
msgid "No"
msgstr "Ne"

#: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258
#: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267
#: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925
msgid "Yes"
msgstr "Jes"

#: ../../any.pm_.c:645
msgid "See hardware info"
msgstr "Vidu hardvaran informon"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:662
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Instalas pelilon por %s karto %s"

#: ../../any.pm_.c:663
#, c-format
msgid "(module %s)"
msgstr "(modulo %s)"

#: ../../any.pm_.c:674
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: ../../any.pm_.c:680
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Nun vi povas provizi �iajn opciojn al modulo %s.\n"
"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
"Ekzemple, ``io=0x300 irq=7''"

#: ../../any.pm_.c:682
msgid "Module options:"
msgstr "Modulaj opcioj:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:694
#, c-format
msgid "Which %s driver should I try?"
msgstr "Kiun %s pelilon devus mi provi?"

#: ../../any.pm_.c:703
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Iuokaze, la %s pelilo bezonas havi aldonan informon por �uste funkcii,\n"
"kvankam �i normale funkcias bone sen la informo.  �u vi deziras specifi\n"
"aldonajn opciojn por �i a� permesi al la pelilo esplori vian komputilon\n"
"por la informo �i bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
"�i ne devus ka�zi difekton."

#: ../../any.pm_.c:707
msgid "Autoprobe"
msgstr "A�tomate esploru"

#: ../../any.pm_.c:707
msgid "Specify options"
msgstr "Specifu opciojn"

#: ../../any.pm_.c:719
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"�argado de modulo %s malsukcesis.\n"
"�u vi deziras trovi denove kun aliaj parametroj?"

#: ../../any.pm_.c:734
msgid "access to X programs"
msgstr ""

#: ../../any.pm_.c:735
msgid "access to rpm tools"
msgstr ""

#: ../../any.pm_.c:736
msgid "allow \"su\""
msgstr ""

#: ../../any.pm_.c:737
msgid "access to administrative files"
msgstr ""

#: ../../any.pm_.c:738
msgid "access to network tools"
msgstr ""

#: ../../any.pm_.c:739
msgid "access to compilation tools"
msgstr ""

#: ../../any.pm_.c:744
#, c-format
msgid "(already added %s)"
msgstr "(jam aldonis %s)"

#: ../../any.pm_.c:749
msgid "This password is too simple"
msgstr "�i tiu pasvorto estas tro simpla"

#: ../../any.pm_.c:750
msgid "Please give a user name"
msgstr "Bonvole donu salutnomon"

#: ../../any.pm_.c:751
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"

#: ../../any.pm_.c:752
#, fuzzy
msgid "The user name is too long"
msgstr "�i tiu salutnomo estas jam aldonita"

#: ../../any.pm_.c:753
msgid "This user name is already added"
msgstr "�i tiu salutnomo estas jam aldonita"

#: ../../any.pm_.c:757
msgid "Add user"
msgstr "Aldonu uzanto"

#: ../../any.pm_.c:758
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Enigu uzanton\n"
"%s"

#: ../../any.pm_.c:759
msgid "Accept user"
msgstr "Akceptu uzanto"

#: ../../any.pm_.c:770
msgid "Real name"
msgstr "Vera nomo"

#: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802
#: ../../printer/printerdrake.pm_.c:915
msgid "User name"
msgstr "Salutnomo"

#: ../../any.pm_.c:774
msgid "Shell"
msgstr "�elo"

#: ../../any.pm_.c:776
msgid "Icon"
msgstr "Piktogramo"

#: ../../any.pm_.c:803
msgid "Autologin"
msgstr "A�tomata-enregistrado"

#: ../../any.pm_.c:804
#, fuzzy
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Mi povas konfiguri vian komputilon por a�tomate enregistri unu uzulon kiam\n"
"�i startas.  Se vi ne deziras uzi �i tion, alklaku la `Nuligu' butonon."

#: ../../any.pm_.c:808
msgid "Choose the default user:"
msgstr "Elektu la defa�ltan uzulon:"

#: ../../any.pm_.c:809
msgid "Choose the window manager to run:"
msgstr "Elektu la fenestro-administrilon por lan�i:"

#: ../../any.pm_.c:824
#, fuzzy
msgid "Please choose a language to use."
msgstr "Bonvole, elektu lingvon por uzi."

#: ../../any.pm_.c:826
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta� la instalado"

#: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697
#: ../../standalone/drakxtv_.c:70
msgid "All"
msgstr "�iuj"

#: ../../any.pm_.c:961
#, fuzzy
msgid "Allow all users"
msgstr "Aldonu uzulon"

#: ../../any.pm_.c:961
#, fuzzy
msgid "No sharing"
msgstr "CUPS startas"

#: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
"�i tiu paka�o devus esti promociata.\n"
"�u vi certas ke vi deziras malelekti �in?"

#: ../../any.pm_.c:973
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""

#: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""

#: ../../any.pm_.c:987
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: ../../any.pm_.c:1001
msgid "Launch userdrake"
msgstr ""

#: ../../any.pm_.c:1003
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user in this group."
msgstr ""

#: ../../any.pm_.c:1053 ../../security/level.pm_.c:7
msgid "Welcome To Crackers"
msgstr "Bonvenon Al Rompistoj"

#: ../../any.pm_.c:1054 ../../security/level.pm_.c:8
msgid "Poor"
msgstr "Malbona"

#: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9
msgid "Standard"
msgstr "La�norma"

#: ../../any.pm_.c:1056 ../../security/level.pm_.c:10
msgid "High"
msgstr "Alta"

#: ../../any.pm_.c:1057 ../../security/level.pm_.c:11
#, fuzzy
msgid "Higher"
msgstr "Alta"

#: ../../any.pm_.c:1058 ../../security/level.pm_.c:12
msgid "Paranoid"
msgstr "Paranoja"

#: ../../any.pm_.c:1061
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"vi devus uzi �i tiun nivelon zorge. �i faras vian komputilon pli facila\n"
"por uzi, sed delikatega: vi devus neniam uzi �i surrete.\n"
"�i ne havas pasvortojn."

#: ../../any.pm_.c:1064
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankora�\n"
"ne rekomendita."

#: ../../any.pm_.c:1065
#, fuzzy
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"�i tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."

#: ../../any.pm_.c:1066
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: ../../any.pm_.c:1067
#, fuzzy
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Kun �i tiu sekurnivelo, uzado de �i tiu komputilo kiel servilo ebli�as.\n"
"La sekureco nun estas sufi�e alta por uzi la sistemon kiel servilo kiu\n"
"akceptas konektojn de multaj klientoj."

#: ../../any.pm_.c:1070
#, fuzzy
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
"malfermita.  Sekurecaj aspektoj estas �e iliaj maksimumoj."

#: ../../any.pm_.c:1076
#, fuzzy
msgid "DrakSec Basic Options"
msgstr "Opcioj"

#: ../../any.pm_.c:1077
#, fuzzy
msgid "Please choose the desired security level"
msgstr "Elektu sekurnivelon?"

#: ../../any.pm_.c:1080
#, fuzzy
msgid "Security level"
msgstr "Elektas sekurnivelon"

#: ../../any.pm_.c:1082
#, fuzzy
msgid "Use libsafe for servers"
msgstr "Elektu opciojn por servilo"

#: ../../any.pm_.c:1083
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: ../../any.pm_.c:1084
msgid "Security Administrator (login or email)"
msgstr ""

#: ../../any.pm_.c:1166
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:436
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Bonvenon al %s, la mastruma sistema elektilo!\n"
"\n"
"Elektu mastruman sistemon de la supra listo a�\n"
"atendu dum %d sekundoj por defa�lta starto.\n"
"\n"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:983
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:986
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:989
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr ""
"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
"redakti la"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:992
msgid "commands before booting, or 'c' for a command-line."
msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:995
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."

#: ../../bootloader.pm_.c:999
msgid "not enough room in /boot"
msgstr "mankas sufi�e da spaco en /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:1099
msgid "Desktop"
msgstr "Desktop"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:1101
msgid "Start Menu"
msgstr "Start Menu"

#: ../../bootloader.pm_.c:1120
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Kie vi deziras instali la start�argilon?"

#: ../../bootlook.pm_.c:53
#, fuzzy
msgid "Boot Style Configuration"
msgstr "Post-instala konfigurado"

#: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54
#: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82
#: ../../standalone/logdrake_.c:74
msgid "/_File"
msgstr "/_Dosiero"

#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55
#: ../../standalone/logdrake_.c:80
msgid "/File/_Quit"
msgstr "/Dosiero/_Foriru"

#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55
#: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80
msgid "<control>Q"
msgstr "<stir>F"

#: ../../bootlook.pm_.c:82
msgid "NewStyle Categorizing Monitor"
msgstr ""

#: ../../bootlook.pm_.c:83
msgid "NewStyle Monitor"
msgstr "NovStila Ekrano"

#: ../../bootlook.pm_.c:84
msgid "Traditional Monitor"
msgstr "Tradicia Ekrano"

#: ../../bootlook.pm_.c:85
msgid "Traditional Gtk+ Monitor"
msgstr "Tradicia Gtk+ Ekrano"

#: ../../bootlook.pm_.c:86
msgid "Launch Aurora at boot time"
msgstr ""

#: ../../bootlook.pm_.c:89
msgid "Lilo/grub mode"
msgstr "Lilo/grub modalo"

#: ../../bootlook.pm_.c:89
msgid "Yaboot mode"
msgstr "Yaboot modalo"

#: ../../bootlook.pm_.c:138
#, fuzzy
msgid "Install themes"
msgstr "Instalu sistemon"

#: ../../bootlook.pm_.c:139
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: ../../bootlook.pm_.c:140
#, fuzzy
msgid "Create new theme"
msgstr "Kreu novan subdiskon"

#: ../../bootlook.pm_.c:184
#, c-format
msgid "Backup %s to %s.old"
msgstr ""

#: ../../bootlook.pm_.c:187
#, c-format
msgid "Copy %s to %s"
msgstr ""

#: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224
#: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250
#: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119
#: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352
#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481
#: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45
#: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75
#: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119
#: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21
msgid "Error"
msgstr "Eraro"

#: ../../bootlook.pm_.c:192
msgid "Lilo message not found"
msgstr ""

#: ../../bootlook.pm_.c:222
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""

#: ../../bootlook.pm_.c:222
#, fuzzy, c-format
msgid "Write %s"
msgstr "XFree %s"

#: ../../bootlook.pm_.c:224
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""

#: ../../bootlook.pm_.c:235
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""

#: ../../bootlook.pm_.c:238
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr ""

#: ../../bootlook.pm_.c:244
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""

#: ../../bootlook.pm_.c:248
msgid "Relaunch 'lilo'"
msgstr ""

#: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156
#: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449
#, fuzzy
msgid "Notice"
msgstr "agrabla(j)"

#: ../../bootlook.pm_.c:251
msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""

#: ../../bootlook.pm_.c:251
#, fuzzy
msgid "Theme installation failed!"
msgstr "Elektu instalklason"

#: ../../bootlook.pm_.c:259
#, fuzzy, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr "Disdividado de Interreta Konekto"

#: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380
#: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400
#: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551
msgid "Configure"
msgstr "Konfiguru"

#: ../../bootlook.pm_.c:268
#, fuzzy
msgid "Splash selection"
msgstr "Elektado de individuaj paka�oj"

#: ../../bootlook.pm_.c:271
msgid "Themes"
msgstr ""

#: ../../bootlook.pm_.c:273
msgid ""
"\n"
"Select theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separatly"
msgstr ""

#: ../../bootlook.pm_.c:276
msgid "Lilo screen"
msgstr ""

#: ../../bootlook.pm_.c:281
msgid "Bootsplash"
msgstr ""

#: ../../bootlook.pm_.c:316
msgid "System mode"
msgstr "Sistema modalo"

#: ../../bootlook.pm_.c:318
msgid "Launch the graphical environment when your system starts"
msgstr ""

#: ../../bootlook.pm_.c:323
msgid "No, I don't want autologin"
msgstr ""

#: ../../bootlook.pm_.c:325
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""

#: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96
#: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355
#: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797
#: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137
#: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432
#: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561
#: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604
#: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911
#: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288
#: ../../ugtk2.pm_.c:355
msgid "OK"
msgstr "Jes"

#: ../../common.pm_.c:107
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:107
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:107
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:115
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:123
#, c-format
msgid "%d minutes"
msgstr "%d minutoj"

#: ../../common.pm_.c:125
msgid "1 minute"
msgstr "1 minuto"

#: ../../common.pm_.c:127
#, c-format
msgid "%d seconds"
msgstr "%d sekundoj"

#: ../../common.pm_.c:172
#, fuzzy
msgid "Can't make screenshots before partitioning"
msgstr "Mi ne povas aldoni plu da subdiskoj"

#: ../../common.pm_.c:179
#, fuzzy, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""
"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta� la instalado"

#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:127
#, fuzzy
msgid "France"
msgstr "Franca"

#: ../../crypto.pm_.c:15
msgid "Costa Rica"
msgstr ""

#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:130
#, fuzzy
msgid "Belgium"
msgstr "Belga"

#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
msgid "Czech Republic"
msgstr ""

#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
#, fuzzy
msgid "Germany"
msgstr "Germana"

#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
#, fuzzy
msgid "Greece"
msgstr "Greka"

#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33
#, fuzzy
msgid "Norway"
msgstr "Norvega"

#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34
#, fuzzy
msgid "Sweden"
msgstr "Sveda"

#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:128
msgid "Netherlands"
msgstr ""

#: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "Italy"
msgstr "Itala"

#: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38
#, fuzzy
msgid "Austria"
msgstr "seria"

#: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:131
msgid "United States"
msgstr ""

#: ../../diskdrake/dav.pm_.c:19
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: ../../diskdrake/dav.pm_.c:27
#, fuzzy
msgid "New"
msgstr "nova"

#: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400
#: ../../diskdrake/smbnfs_gtk.pm_.c:81
msgid "Unmount"
msgstr "Malmuntu"

#: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397
#: ../../diskdrake/smbnfs_gtk.pm_.c:82
msgid "Mount"
msgstr "Muntu"

#: ../../diskdrake/dav.pm_.c:65
msgid "Server"
msgstr "Servilo"

#: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391
#: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607
#: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85
msgid "Mount point"
msgstr "Surmetingo"

#: ../../diskdrake/dav.pm_.c:85
#, fuzzy
msgid "Please enter the WebDAV server URL"
msgstr "Bonvole, provu la muson"

#: ../../diskdrake/dav.pm_.c:88
#, fuzzy
msgid "The URL must begin with http:// or https://"
msgstr "Prokura servilo devus esti http://..."

#: ../../diskdrake/dav.pm_.c:109
#, fuzzy
msgid "Server: "
msgstr "Servilo"

#: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452
#: ../../diskdrake/interactive.pm_.c:1102
#: ../../diskdrake/interactive.pm_.c:1177
msgid "Mount point: "
msgstr "Surmetingo: "

#: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183
#, c-format
msgid "Options: %s"
msgstr "Opcioj: %s"

#: ../../diskdrake/hd_gtk.pm_.c:97
msgid "Please make a backup of your data first"
msgstr "Bonvolu fari rezervan kopion de via dateno anta�e"

#: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946
#: ../../diskdrake/interactive.pm_.c:956
#: ../../diskdrake/interactive.pm_.c:1022
msgid "Read carefully!"
msgstr "Legu zorge"

#: ../../diskdrake/hd_gtk.pm_.c:100
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
"sufi�as)\n"
"�e la komenco de la disko"

#: ../../diskdrake/hd_gtk.pm_.c:154
msgid "Wizard"
msgstr "Sor�isto"

#: ../../diskdrake/hd_gtk.pm_.c:187
msgid "Choose action"
msgstr "Elektu agon"

#: ../../diskdrake/hd_gtk.pm_.c:191
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Vi havas unu grandan FAT subdiskon.\n"
"(�enerale uzata de MicroSoft DOS/Vindozo).\n"
"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
"(klaku sur �in, kaj poste klaku sur \"Regrandecigu\")"

#: ../../diskdrake/hd_gtk.pm_.c:194
msgid "Please click on a partition"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69
#: ../../install_steps_gtk.pm_.c:464
msgid "Details"
msgstr "Detaloj"

#: ../../diskdrake/hd_gtk.pm_.c:254
#, fuzzy
msgid "No hard drives found"
msgstr "Loka printilo"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "Ext2"
msgstr "2a Etendata (Ext2)"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "FAT"
msgstr "Dosierlokigtabelo (FAT)"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm_.c:325
#, fuzzy
msgid "Journalised FS"
msgstr "muntado malsukcesis"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "Swap"
msgstr "Inter�an�a"

#: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118
msgid "Empty"
msgstr "Malplena"

#: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324
#: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165
#: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719
msgid "Other"
msgstr "Alia"

#: ../../diskdrake/hd_gtk.pm_.c:330
msgid "Filesystem types:"
msgstr "Specoj de dosiersistemoj:"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414
msgid "Create"
msgstr "Kreu"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392
#: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26
#: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66
msgid "Type"
msgstr "Tipo"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349
#, c-format
msgid "Use ``%s'' instead"
msgstr "Uzu ``%s'' anstata�e"

#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401
msgid "Delete"
msgstr "Forigu"

#: ../../diskdrake/hd_gtk.pm_.c:353
msgid "Use ``Unmount'' first"
msgstr "Uzu ``Malmuntu'' anta�e"

#: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Post vi �an�as la specon de subdisko %s, �iuj datenoj en �i tiu subdisko "
"estos\n"
"perdata"

#: ../../diskdrake/interactive.pm_.c:177
#, fuzzy
msgid "Choose a partition"
msgstr "Elektu agon"

#: ../../diskdrake/interactive.pm_.c:177
#, fuzzy
msgid "Choose another partition"
msgstr "Kreu novan subdiskon"

#: ../../diskdrake/interactive.pm_.c:202
#, fuzzy
msgid "Exit"
msgstr "2a Etendata (Ext2)"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Toggle to expert mode"
msgstr "�an�u al Spertula re�imo"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Toggle to normal mode"
msgstr "�an�u al Normala re�imo"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Undo"
msgstr "Malfaru"

#: ../../diskdrake/interactive.pm_.c:247
msgid "Continue anyway?"
msgstr "�u mi devus da�ri malgra�e?"

#: ../../diskdrake/interactive.pm_.c:252
msgid "Quit without saving"
msgstr "�u eliru sen konservi"

#: ../../diskdrake/interactive.pm_.c:252
msgid "Quit without writing the partition table?"
msgstr "�u eliru sen skribi la subdisktabelon?"

#: ../../diskdrake/interactive.pm_.c:257
#, fuzzy
msgid "Do you want to save /etc/fstab modifications"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../diskdrake/interactive.pm_.c:271
msgid "Clear all"
msgstr "Forvi�u �ion"

#: ../../diskdrake/interactive.pm_.c:272
msgid "Auto allocate"
msgstr "A�tomate disponigu"

#: ../../diskdrake/interactive.pm_.c:273
#: ../../install_steps_interactive.pm_.c:220
msgid "More"
msgstr "Plu"

#: ../../diskdrake/interactive.pm_.c:278
#, fuzzy
msgid "Hard drive information"
msgstr "Detektado de fiksdisko(j)"

#: ../../diskdrake/interactive.pm_.c:310
msgid "All primary partitions are used"
msgstr "�iuj el la subdiskoj estas uzata"

#: ../../diskdrake/interactive.pm_.c:311
msgid "I can't add any more partition"
msgstr "Mi ne povas aldoni plu da subdiskoj"

#: ../../diskdrake/interactive.pm_.c:312
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
"subdiskon"

#: ../../diskdrake/interactive.pm_.c:322
#, fuzzy
msgid "Save partition table"
msgstr "Skribu subdiskotabelon"

#: ../../diskdrake/interactive.pm_.c:323
#, fuzzy
msgid "Restore partition table"
msgstr "Sava subdiskotabelo"

#: ../../diskdrake/interactive.pm_.c:324
msgid "Rescue partition table"
msgstr "Sava subdiskotabelo"

#: ../../diskdrake/interactive.pm_.c:326
#, fuzzy
msgid "Reload partition table"
msgstr "Sava subdiskotabelo"

#: ../../diskdrake/interactive.pm_.c:331
#, fuzzy
msgid "Removable media automounting"
msgstr "A�tomata muntado de demetebla medio"

#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360
msgid "Select file"
msgstr "Elektu dosieron"

#: ../../diskdrake/interactive.pm_.c:347
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"La rezerva subdisktabelo ne estas la sama grandeco\n"
"�u da�ras tamen?"

#: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202
#: ../../network/modem.pm_.c:95
msgid "Warning"
msgstr "Averto"

#: ../../diskdrake/interactive.pm_.c:362
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"En�ovu disketon en drajvo\n"
"�iuj datenoj sur tiu disketo estos perdata"

#: ../../diskdrake/interactive.pm_.c:373
msgid "Trying to rescue partition table"
msgstr "Provas savi subdisktabelon"

#: ../../diskdrake/interactive.pm_.c:379
#, fuzzy
msgid "Detailed information"
msgstr "Montru informon"

#: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674
msgid "Resize"
msgstr "Regrandecigu"

#: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727
msgid "Move"
msgstr "Movu"

#: ../../diskdrake/interactive.pm_.c:396
msgid "Format"
msgstr "Formatu"

#: ../../diskdrake/interactive.pm_.c:398
msgid "Add to RAID"
msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../../diskdrake/interactive.pm_.c:399
msgid "Add to LVM"
msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../../diskdrake/interactive.pm_.c:402
msgid "Remove from RAID"
msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../../diskdrake/interactive.pm_.c:403
msgid "Remove from LVM"
msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../../diskdrake/interactive.pm_.c:404
msgid "Modify RAID"
msgstr "�an�u RAID (Redundanca Aro de Malmultekostaj Diskoj)"

#: ../../diskdrake/interactive.pm_.c:405
msgid "Use for loopback"
msgstr "Uzu por retrokonektado"

#: ../../diskdrake/interactive.pm_.c:445
msgid "Create a new partition"
msgstr "Kreu novan subdiskon"

#: ../../diskdrake/interactive.pm_.c:448
msgid "Start sector: "
msgstr "Komenca sektoro: "

#: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827
msgid "Size in MB: "
msgstr "Grandeco en MB: "

#: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828
msgid "Filesystem type: "
msgstr "Speco de dosiersistemo: "

#: ../../diskdrake/interactive.pm_.c:456
msgid "Preference: "
msgstr "Prefero: "

#: ../../diskdrake/interactive.pm_.c:481
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: ../../diskdrake/interactive.pm_.c:511
#, fuzzy
msgid "Remove the loopback file?"
msgstr "Formatas retrokonektan dosieron %s"

#: ../../diskdrake/interactive.pm_.c:541
msgid "Change partition type"
msgstr "�an�u subdiskspecon"

#: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48
msgid "Which filesystem do you want?"
msgstr "Kiun dosierosistemo vi deziras uzi?"

#: ../../diskdrake/interactive.pm_.c:548
msgid "Switching from ext2 to ext3"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:578
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Kie vi deziras munti retrokonektan dosieron %s?"

#: ../../diskdrake/interactive.pm_.c:579
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Kie vi deziras munti aparato %s?"

#: ../../diskdrake/interactive.pm_.c:585
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Ne povas malfiksi surmetingon �ar �i tiu subdisko estas uzata por\n"
"retrokonektado.  Unue forigu la retrokonektadon."

#: ../../diskdrake/interactive.pm_.c:606
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "Kie vi deziras munti aparato %s?"

#: ../../diskdrake/interactive.pm_.c:630
msgid "Computing FAT filesystem bounds"
msgstr "Kalkulas FAT dosiersistemajn limojn"

#: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689
#: ../../install_interactive.pm_.c:131
msgid "Resizing"
msgstr "Regrandecigas"

#: ../../diskdrake/interactive.pm_.c:662
msgid "This partition is not resizeable"
msgstr "�i tiu subdisko ne estas regrandecigebla"

#: ../../diskdrake/interactive.pm_.c:667
msgid "All data on this partition should be backed-up"
msgstr "�iuj datenoj en �i tiu subdisko devus esti rezervata"

#: ../../diskdrake/interactive.pm_.c:669
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Post vi regrandecigas subdiskon %s, �iuj datenoj en �i tiu subdisko estos\n"
"perdata"

#: ../../diskdrake/interactive.pm_.c:674
msgid "Choose the new size"
msgstr "Elektu la novan grandecon"

#: ../../diskdrake/interactive.pm_.c:675
#, fuzzy
msgid "New size in MB: "
msgstr "Grandeco en MB: "

#: ../../diskdrake/interactive.pm_.c:728
msgid "Which disk do you want to move it to?"
msgstr "Al kiu disko vi deziras movi?"

#: ../../diskdrake/interactive.pm_.c:729
msgid "Sector"
msgstr "Sektoro"

#: ../../diskdrake/interactive.pm_.c:730
msgid "Which sector do you want to move it to?"
msgstr "Al kiu sektoro vi deziras movi?"

#: ../../diskdrake/interactive.pm_.c:733
msgid "Moving"
msgstr "Movante"

#: ../../diskdrake/interactive.pm_.c:733
msgid "Moving partition..."
msgstr "Movas subdisko..."

#: ../../diskdrake/interactive.pm_.c:750
msgid "Choose an existing RAID to add to"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768
msgid "new"
msgstr "nova"

#: ../../diskdrake/interactive.pm_.c:766
msgid "Choose an existing LVM to add to"
msgstr ""
"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
"aldoni al"

#: ../../diskdrake/interactive.pm_.c:771
msgid "LVM name?"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:812
msgid "This partition can't be used for loopback"
msgstr "Vi ne povas uzi �i tiun subdiskon por retrokonektado"

#: ../../diskdrake/interactive.pm_.c:825
msgid "Loopback"
msgstr "Retrokonektado"

#: ../../diskdrake/interactive.pm_.c:826
msgid "Loopback file name: "
msgstr "Retrokonekta dosieronomo: "

#: ../../diskdrake/interactive.pm_.c:831
#, fuzzy
msgid "Give a file name"
msgstr "Vera nomo"

#: ../../diskdrake/interactive.pm_.c:834
msgid "File already used by another loopback, choose another one"
msgstr "Alia retrokonektado jam uzas tiun dosieron, elektu alian"

#: ../../diskdrake/interactive.pm_.c:835
msgid "File already exists. Use it?"
msgstr "Dosiero jam ekzistas.  �u vi deziras uzi �in?"

#: ../../diskdrake/interactive.pm_.c:858
#, fuzzy
msgid "Mount options"
msgstr "Modulaj opcioj:"

#: ../../diskdrake/interactive.pm_.c:865
msgid "Various"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76
msgid "device"
msgstr "aparato"

#: ../../diskdrake/interactive.pm_.c:930
msgid "level"
msgstr "nivelo"

#: ../../diskdrake/interactive.pm_.c:931
msgid "chunk size"
msgstr "grandeco de pecoj"

#: ../../diskdrake/interactive.pm_.c:947
msgid "Be careful: this operation is dangerous."
msgstr "Zorgu: �i tiu operacio estas dan�era."

#: ../../diskdrake/interactive.pm_.c:962
msgid "What type of partitioning?"
msgstr "Kiun specon de subdiskado?"

#: ../../diskdrake/interactive.pm_.c:978
#, fuzzy, c-format
msgid "The package %s is needed. Install it?"
msgstr ""
"�i tiu paka�o devus esti promociata.\n"
"�u vi certas ke vi deziras malelekti �in?"

#: ../../diskdrake/interactive.pm_.c:992
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Beda�rinde mi ne kreas /boot tiom longe sur la drajvon (�e cilindro > "
"1024).\n"
"A� vi uzos LILO kaj �i ne funkcios, a� vi ne uzos LILO kaj vi ne bezonas\n"
"/boot."

#: ../../diskdrake/interactive.pm_.c:996
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
"subdiskon.  Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
"/boot subdiskon."

#: ../../diskdrake/interactive.pm_.c:1002
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
"Neniu start�argilo povas trakti tiun sen /boot subdisko.\n"
"Do zorgu aldoni /boot subdiskon."

#: ../../diskdrake/interactive.pm_.c:1022
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"

#: ../../diskdrake/interactive.pm_.c:1026
msgid "You'll need to reboot before the modification can take place"
msgstr "Vi bezonos restarti anta� ol la �an�o povas efektivi�i"

#: ../../diskdrake/interactive.pm_.c:1037
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Post vi formatas la subdiskon %s, �iuj datenoj en �i tiu subdisko estos\n"
"perdata"

#: ../../diskdrake/interactive.pm_.c:1039
msgid "Formatting"
msgstr "Formatas"

#: ../../diskdrake/interactive.pm_.c:1040
#, c-format
msgid "Formatting loopback file %s"
msgstr "Formatas retrokonektan dosieron %s"

#: ../../diskdrake/interactive.pm_.c:1041
#: ../../install_steps_interactive.pm_.c:466
#, c-format
msgid "Formatting partition %s"
msgstr "Formatas subdiskon %s"

#: ../../diskdrake/interactive.pm_.c:1052
#, fuzzy
msgid "Hide files"
msgstr "mkraid malsukcesis"

#: ../../diskdrake/interactive.pm_.c:1052
#, fuzzy
msgid "Move files to the new partition"
msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"

#: ../../diskdrake/interactive.pm_.c:1053
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1064
#, fuzzy
msgid "Moving files to the new partition"
msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"

#: ../../diskdrake/interactive.pm_.c:1068
#, c-format
msgid "Copying %s"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1072
#, fuzzy, c-format
msgid "Removing %s"
msgstr "Distingivo: %s\n"

#: ../../diskdrake/interactive.pm_.c:1082
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1103
#: ../../diskdrake/interactive.pm_.c:1162
msgid "Device: "
msgstr "Aparato: "

#: ../../diskdrake/interactive.pm_.c:1104
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"

#: ../../diskdrake/interactive.pm_.c:1108
#: ../../diskdrake/interactive.pm_.c:1116
#: ../../diskdrake/interactive.pm_.c:1181
msgid "Type: "
msgstr "Speco: "

#: ../../diskdrake/interactive.pm_.c:1112
msgid "Name: "
msgstr "Nomo: "

#: ../../diskdrake/interactive.pm_.c:1120
#, c-format
msgid "Start: sector %s\n"
msgstr "Komenco: sektoro %s\n"

#: ../../diskdrake/interactive.pm_.c:1121
#, c-format
msgid "Size: %s"
msgstr "Grandeco: %s"

#: ../../diskdrake/interactive.pm_.c:1123
#, c-format
msgid ", %s sectors"
msgstr ", %s sektoroj"

#: ../../diskdrake/interactive.pm_.c:1125
#, fuzzy, c-format
msgid "Cylinder %d to %d\n"
msgstr "De cilindro %d al cilindro %d\n"

#: ../../diskdrake/interactive.pm_.c:1126
msgid "Formatted\n"
msgstr "Formatita\n"

#: ../../diskdrake/interactive.pm_.c:1127
msgid "Not formatted\n"
msgstr "Ne formatita\n"

#: ../../diskdrake/interactive.pm_.c:1128
msgid "Mounted\n"
msgstr "Muntita\n"

#: ../../diskdrake/interactive.pm_.c:1129
#, c-format
msgid "RAID md%s\n"
msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"

#: ../../diskdrake/interactive.pm_.c:1131
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Retrokonekta(j) dosiero(j): %s\n"

#: ../../diskdrake/interactive.pm_.c:1132
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Subdisko startata defa�lte\n"
"    (por MS-DOS starto, ne por \"lilo\")\n"

#: ../../diskdrake/interactive.pm_.c:1134
#, c-format
msgid "Level %s\n"
msgstr "Nivelo %s\n"

#: ../../diskdrake/interactive.pm_.c:1135
#, c-format
msgid "Chunk size %s\n"
msgstr "Grandeco de pecoj %s\n"

#: ../../diskdrake/interactive.pm_.c:1136
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"

#: ../../diskdrake/interactive.pm_.c:1138
#, c-format
msgid "Loopback file name: %s"
msgstr "Retrokonekta dosieronomo: %s"

#: ../../diskdrake/interactive.pm_.c:1141
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1144
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1163
msgid "Read-only"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1164
#, c-format
msgid "Size: %s\n"
msgstr "Grandeco: %s\n"

#: ../../diskdrake/interactive.pm_.c:1165
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"

#: ../../diskdrake/interactive.pm_.c:1166
msgid "Info: "
msgstr "Informo: "

#: ../../diskdrake/interactive.pm_.c:1167
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"

#: ../../diskdrake/interactive.pm_.c:1168
#, c-format
msgid "Partition table type: %s\n"
msgstr "Subdiskotabelospeco: %s\n"

#: ../../diskdrake/interactive.pm_.c:1169
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "�e buso %d identiga�o %d\n"

#: ../../diskdrake/interactive.pm_.c:1199
#, fuzzy
msgid "Filesystem encryption key"
msgstr "Speco de dosiersistemo: "

#: ../../diskdrake/interactive.pm_.c:1200
msgid "Choose your filesystem encryption key"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1203
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"�i tiu pasvorto ests tro simpla (�i devas esti almena� %d signoj longa)"

#: ../../diskdrake/interactive.pm_.c:1204
#, fuzzy
msgid "The encryption keys do not match"
msgstr "La pasvortoj ne egalas"

#: ../../diskdrake/interactive.pm_.c:1207
msgid "Encryption key"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1208
msgid "Encryption key (again)"
msgstr ""

#: ../../diskdrake/removable.pm_.c:47
#, fuzzy
msgid "Change type"
msgstr "�an�u subdiskspecon"

#: ../../diskdrake/smbnfs_gtk.pm_.c:162
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175
#, fuzzy
msgid "Domain Authentication Required"
msgstr "A�tentikigado"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Another one"
msgstr "Interreto"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Which username"
msgstr "Salutnomo"

#: ../../diskdrake/smbnfs_gtk.pm_.c:176
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477
#, fuzzy
msgid "Username"
msgstr "Salutnomo"

#: ../../diskdrake/smbnfs_gtk.pm_.c:180
#, fuzzy
msgid "Domain"
msgstr "NIS Domajno"

#: ../../diskdrake/smbnfs_gtk.pm_.c:200
#, fuzzy
msgid "Search servers"
msgstr "DNA servilo"

#: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565
#: ../../fs.pm_.c:569 ../../fs.pm_.c:573
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatado de %s malsukcesis"

#: ../../fs.pm_.c:610
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "ne scias kiel formati %s kiel speco %s"

#: ../../fs.pm_.c:684 ../../fs.pm_.c:727
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599
#, c-format
msgid "error unmounting %s: %s"
msgstr "eraro dum malmunti %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "simpla"

#: ../../fsedit.pm_.c:25
msgid "with /usr"
msgstr ""

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "servilo"

#: ../../fsedit.pm_.c:240
#, fuzzy, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Mi ne povas legi vian subdisktabelon, �i estas tro difektita por mi :(\n"
"Mi povas peni da�ri per blankigi difektitajn subdiskojn (�IOM DA DATUMO\n"
"pereos!).  La alia solvo estas malpermesi al DrakX �an�i la subdisktabelon.\n"
"(la eraro estas %s)\n"
"\n"
"�u vi konsentas perdi �iujn subdiskojn?\n"

#: ../../fsedit.pm_.c:501
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"

#: ../../fsedit.pm_.c:502
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"

#: ../../fsedit.pm_.c:521
msgid "Mount points must begin with a leading /"
msgstr "Surmetingoj devas komenci kun anta�a /"

#: ../../fsedit.pm_.c:522
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Jam estas subdisko kun surmetingo �e %s\n"

#: ../../fsedit.pm_.c:526
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""

#: ../../fsedit.pm_.c:528
msgid "This directory should remain within the root filesystem"
msgstr "�i tiu dosierujo devus resti interne de la radika dosierosistemo (/)"

#: ../../fsedit.pm_.c:530
#, fuzzy
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"

#: ../../fsedit.pm_.c:532
#, fuzzy, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"

#: ../../fsedit.pm_.c:599
#, fuzzy
msgid "Not enough free space for auto-allocating"
msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"

#: ../../fsedit.pm_.c:601
msgid "Nothing to do"
msgstr ""

#: ../../fsedit.pm_.c:694
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Eraro dum malfermado de %s por skribi: %s"

#: ../../harddrake/data.pm_.c:71
msgid "cpu /* "
msgstr ""

#: ../../harddrake/sound.pm_.c:170
msgid "No alternative driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:171
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: ../../harddrake/sound.pm_.c:173
#, fuzzy
msgid "Sound configuration"
msgstr "LAN Konfigura�o"

#: ../../harddrake/sound.pm_.c:174
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#: ../../harddrake/sound.pm_.c:176
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: ../../harddrake/sound.pm_.c:178
#, fuzzy
msgid "Driver:"
msgstr "Pelilo"

#: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303
#: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911
#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964
#: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030
#: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078
#: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134
#: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690
#, fuzzy
msgid "Help"
msgstr "/_Helpo"

#: ../../harddrake/sound.pm_.c:185
msgid "Switching between ALSA and OSS help"
msgstr ""

#: ../../harddrake/sound.pm_.c:186
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: ../../harddrake/sound.pm_.c:202
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oopses the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""

#: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298
#, fuzzy
msgid "Please Wait... Applying the configuration"
msgstr "Provu konfigura�on"

#: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382
#: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113
#: ../../standalone/service_harddrake_.c:64
msgid "Please wait"
msgstr "Bonvole atendu"

#: ../../harddrake/sound.pm_.c:210
msgid "No known driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:211
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: ../../harddrake/sound.pm_.c:214
msgid "Unkown driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:215
#, c-format
msgid ""
"The \"%s\" driver for your sound card is unlisted\n"
"\n"
"Please send the output of the \"lspcidrake -v\" command to\n"
"<install at mandrakesoft dot com>\n"
"with subject: unlisted sound driver \"%s\""
msgstr ""

#: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64
#, fuzzy
msgid "Auto-detect"
msgstr "Malproksima printilo"

#: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198
#, fuzzy
msgid "Unknown|Generic"
msgstr "Genera"

#: ../../harddrake/v4l.pm_.c:97
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:98
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:224
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed"
msgstr ""

#: ../../harddrake/v4l.pm_.c:227
#, fuzzy
msgid "Card model:"
msgstr "Memoro de Karto (DMA)"

#: ../../harddrake/v4l.pm_.c:228
#, fuzzy
msgid "Tuner type:"
msgstr "�an�u subdiskspecon"

#: ../../harddrake/v4l.pm_.c:229
msgid "Number of capture buffers:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:229
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: ../../harddrake/v4l.pm_.c:231
#, fuzzy
msgid "PLL setting:"
msgstr "Formatas"

#: ../../harddrake/v4l.pm_.c:232
msgid "Radio support:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:232
msgid "enable radio support"
msgstr ""

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more this concept. But unlike \"root\", which is the\n"
"administrator, the users you add here will not be entitled to change\n"
"anything except their own files and their own configurations. You will have\n"
"to create at least one regular user for yourself. That account is where you\n"
"should log in for routine use. Although it is very practical to log in as\n"
"\"root\" everyday, it may also be very dangerous! The slightest mistake\n"
"could mean that your system would not work any more. If you make a serious\n"
"mistake as a regular user, you may only lose some information, but not the\n"
"entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course\n"
"-- as you can actually enter whatever you want. DrakX will then take the\n"
"first word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log onto the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as the \"root\"\n"
"one from a security point of view, but that is no reason to neglect it:\n"
"after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of the people meant to use that computer. When you are\n"
"finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default).\n"
"\n"
"When you are finished adding all users, you will be proposed to choose a\n"
"user which can automatically log into the system when the computer boots\n"
"up. If you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"Yes\".\n"
"If you are not interested in this feature, click \"No\"."
msgstr ""

#: ../../help.pm_.c:48
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installations. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: ../../help.pm_.c:79
msgid ""
"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""

#: ../../help.pm_.c:84
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from a CD-ROM, you will first\n"
"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the corresponding groups;\n"
"\n"
" * \"Development\": if your machine is to be used for programming, choose\n"
"the desired group(s);\n"
"\n"
" * \"Server\": if your machine is intended to be a server, you will be able\n"
"to select which of the most common services you wish to install on your\n"
"machine;\n"
"\n"
" * \"Graphical Environment\": finally, this is where you will choose your\n"
"preferred graphical environment. At least one must be selected if you want\n"
"to have a graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the fewest packages possible to have a working\n"
"graphical desktop;\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server;\n"
"\n"
" * \"Truly minimal install\": will install the strict minimum necessary to\n"
"get a working Linux system, in command line only. This installation is\n"
"about 65Mb large.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful to repair or\n"
"update an existing system."
msgstr ""

#: ../../help.pm_.c:135
msgid ""
"Finally, depending on whether or not you chose to be able to select\n"
"individual packages, you will be presented a tree containing all packages\n"
"classified by groups and subgroups. While browsing the tree, you can select\n"
"entire groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. An installation time estimate is displayed\n"
"on the screen, to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected, either intentionally or because\n"
"it was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows to load the\n"
"package list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of the previous step on how to\n"
"create such a floppy disk."
msgstr ""

#: ../../help.pm_.c:171
msgid ""
"You are now able to set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"OK\".\n"
"The autodetection of network devices and modem will be launched. If this\n"
"detection fails, uncheck the \"Use auto-detection\" box next time. You may\n"
"also choose not to configure the network, or do it later; in that case,\n"
"simply click the \"Cancel\" button.\n"
"\n"
"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation, or if you\n"
"are finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:193
#, fuzzy
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are listed all the services available with the current installation.\n"
"Review them carefully and uncheck those which are not always needed at boot\n"
"time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services which you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"Nun vi povas elekti kiujn servojn vi deziras starti kiam vi startas\n"
"vian komputilon.  Kiam via muso estas supre de ero, malgranda balono\n"
"ekaperas por helpi vin.  �i priskribas la rolon de la servo.\n"
"\n"
"Zorgegu en �i tiu pa�o se vi intencas uzi vian komputilon kiel servilo:\n"
"ne startu servojn kiujn vi ne deziras uzi."

#: ../../help.pm_.c:210
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
"local time according to the time zone you selected. It is however possible\n"
"to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n"
"hardware clock is the same as the system clock. This is useful when the\n"
"machine is hosting another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization\" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. In the\n"
"list that is presented, choose a server located near you. Of course you\n"
"must have a working Internet connection for this feature to work. It will\n"
"actually install on your machine a time server which can be optionally used\n"
"by other machines on your local network."
msgstr ""

#: ../../help.pm_.c:224
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
"\n"
"You will be presented the list of available resolutions and color depth\n"
"available for your hardware. Choose the one that best suit your needs (you\n"
"will be able to change that after installation though). When you are\n"
"satisfied with the sample shown in the monitor, click \"OK\". A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" installation, you will enter the X\n"
"configuration wizard. See the corresponding section of the manual for more\n"
"information about this wizard.\n"
"\n"
"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
"will proceed to the next step. If you cannot see the message, it simply\n"
"means that the configuration was wrong and the test will automatically end\n"
"after 10 seconds, restoring the screen. Refer then to the video\n"
"configuration section of the user guide for more information on how to\n"
"configure your display."
msgstr ""

#: ../../help.pm_.c:246
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:253
msgid ""
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (\n"
"MBR) of your main disk (unless you are using another boot manager), to\n"
"allow you to start up with either Windows or GNU/Linux (assuming you have\n"
"Windows in your system). If you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector, and then you will not be able\n"
"to start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n"
"floppy disk you will insert must be empty or contain data which you do not\n"
"need. You will not have to format it since DrakX will rewrite the whole\n"
"disk."
msgstr ""

#: ../../help.pm_.c:277
msgid ""
"You now need to choose where you want to install the Mandrake Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the partitioning process' effects are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the installation in Expert mode, you will enter\n"
"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
"fine-tune your partitions. See the DiskDrake section in the ``Starter\n"
"Guide''. From the installation interface, you can use the wizards as\n"
"described here by clicking the dialog's \"Wizard\" button.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available.\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further;\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated to\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and you should generally keep them.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data, provided you previously\n"
"defragment the Windows partition. Backing up your data won't hurt either..\n"
"This solution is recommended if you want to use both Mandrake Linux and\n"
"Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than at the present time. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software;\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after you confirm;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful -- it is a powerful but dangerous option. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing. To know how to use the DiskDrake utility used\n"
"here, refer to the section ``Managing Your Partitions'' of the ````Starter\n"
"Guide''''"
msgstr ""

#: ../../help.pm_.c:347
msgid ""
"There you are. Installation is now completed and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation as the\n"
"partitioning step (and only this one) remains interactive;\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section on our web site;\n"
"\n"
" * \"Save packages selection\"(*): saves the package selection as done\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the drive and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:378
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a filesystem on it).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""

#: ../../help.pm_.c:404
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""

#: ../../help.pm_.c:412
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Some bugs may have\n"
"been fixed, and security issues solved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Choose\n"
"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
"to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. Then a package-selection tree\n"
"appears: review the selection, and press \"Install\" to retrieve and\n"
"install the selected package(s), or \"Cancel\" to abort."
msgstr ""

#: ../../help.pm_.c:425
msgid ""
"Before continuing, you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms included in it, click on the \"Refuse\" button which will\n"
"immediately terminate the installation. To continue with the installation,\n"
"click on the \"Accept\" button."
msgstr ""

#: ../../help.pm_.c:432
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expense of\n"
"ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:442
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive;\n"
"\n"
" * \"Auto allocate\": this option enables to automatically create ext3 and\n"
"swap partitions on your hard drive's free space;\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery, if necessary. It is strongly\n"
"recommended to perform this step;\n"
"\n"
" * \"Restore partition table\": allows to restore a previously saved\n"
"partition table from a floppy disk;\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail;\n"
"\n"
" * \"Reload partition table\": discards all changes and loads your initial\n"
"partition table;\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning;\n"
"\n"
" * \"Undo\": use this option to cancel your changes;\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information;\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: ../../help.pm_.c:513
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: ../../help.pm_.c:544
msgid "Please be patient. This operation can take several minutes."
msgstr ""

#: ../../help.pm_.c:547
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\") over your\n"
"installation. You can also choose to do a new installation or upgrade your\n"
"existing Mandrake Linux system:\n"
"\n"
" * \"Install\": completely wipes out the old system. However, depending on\n"
"what is currently installed on your machine, you may be able to keep some\n"
"old partitions (Linux or otherwise) unchanged;\n"
"\n"
" * \"Upgrade\": this installation class allows to simply update the\n"
"packages currently installed on your Mandrake Linux system. It keeps your\n"
"hard drives' current partitions as well as user configurations. All other\n"
"configuration steps remain available, similar to a normal installation;\n"
"\n"
" * \"Upgrade Packages Only\": this new installation class allows you to\n"
"upgrade an existing Mandrake Linux system while keeping all system\n"
"configurations unchanged. Adding new packages to the current installation\n"
"is also possible.\n"
"\n"
"Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n"
"or later.\n"
"\n"
"Depending on your GNU/Linux knowledge, select one of the following choices:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions;\n"
"\n"
" * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
"perform a highly customized installation. Some of the decisions you will\n"
"have to make may be difficult if you do not have good GNU/Linux knowledge,\n"
"so it is not recommended that those without a fair amount of experience\n"
"select this installation class."
msgstr ""

#: ../../help.pm_.c:582
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen). However, you might not have a keyboard that\n"
"corresponds exactly to your language: for example, if you are an English\n"
"speaking Swiss person, you may still want your keyboard to be a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation. In both cases, you will have to go back to\n"
"this installation step and select an appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-latin alphabet, you will be\n"
"asked in the next dialog to choose the key binding that will switch the\n"
"keyboard layout between the latin and non-latin layouts."
msgstr ""

#: ../../help.pm_.c:598
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you host users from Spain on your machine,\n"
"select English as the main language in the tree view and in the Advanced\n"
"section, click on the box corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales, click the \"OK\" button to continue.\n"
"\n"
"To switch from one language to the other, you can launch the\n"
"\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n"
"language, or as a simple user to only change that user's default language."
msgstr ""

#: ../../help.pm_.c:617
msgid ""
"DrakX generally detects the number of buttons your mouse possesses. If not,\n"
"it assumes you have a two-button mouse and will set it up for third-button\n"
"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
"USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse, select the appropriate\n"
"type from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct. If the mouse is not working well, press the space bar or [Return]\n"
"to \"Cancel\" and choose again.\n"
"\n"
"Sometimes, wheel mouses are not automatically detected. You will need to\n"
"manually select it in the list. Be sure to select the one corresponding to\n"
"the correct port it is attached to. After you have pressed the \"OK\"\n"
"button, a mouse image will be displayed. You then need to move the wheel of\n"
"your mouse to activate it correctly. Then test that all buttons and\n"
"movements are correct."
msgstr ""

#: ../../help.pm_.c:638
#, fuzzy
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Bonvolu elekti la �ustan pordon.  Ekzemple, la COM1-a\n"
"pordo sub MS Vindozo estas nomata ttyS0 sub GNU/Linukso."

#: ../../help.pm_.c:642
msgid ""
"This is the most crucial decision in regards with the security of your\n"
"GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n"
"system administrator and is the only one authorized to make updates, add\n"
"users, change the overall system configuration, and so on. In short,\n"
"\"root\" can do everything! That is why you must choose a password that is\n"
"difficult to guess -- DrakX will tell you if it is too easy. As you can\n"
"see, you can choose not to enter a password, but we strongly advise you\n"
"against this if only for one reason: do not think that because you booted\n"
"GNU/Linux that your other operating systems are safe from mistakes. Since\n"
"\"root\" can overcome all limitations and unintentionally erase all data on\n"
"partitions by carelessly accessing the partitions themselves, it is\n"
"important for it to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"In Expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one as \"authentication\". If you have no\n"
"clue, ask your network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:678
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
"OS;\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"if in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Bootloader to use\": you have three choices:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu);\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface;\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose -- in the bootloader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also, be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved for the expert user."
msgstr ""

#: ../../help.pm_.c:718
#, fuzzy
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options which will be available at boot time will be displayed.\n"
"\n"
"If there is another operating system installed on your machine, it will\n"
"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
"the existing options. Select an entry and click \"Modify\" to modify or\n"
"remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n"
"installation step.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (la Linuksa �argilo) kaj Grub estas start�argiloj: ili povas starti\n"
"a� GNU/Linukson a� iun ajn mastruman sistemon �eestanta �e via komputilo.\n"
"Normale, �i tiuj aliaj mastrumaj sistemoj estas �uste detektata kaj\n"
"instalada.  Se tiel ne estas, vi povas aldoni enskribon mane per �i tiu\n"
"ekrano.  Zorgu elekti la �ustajn parametrojn.\n"
"\n"
"\n"
"Eble vi anka� ne deziras doni atingon al �i tiuj aliaj mastrumaj sistemoj\n"
"al iu ajn.  �iokaze vi povas forstreki la respondajn enskribojn.  Sed\n"
"�iokaze, vi bezonos startdiskon por starti ilin!"

#: ../../help.pm_.c:732
#, fuzzy
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
"por starti GNU/Linukson.\n"
"\n"
"\n"
"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
"drajvo (MBR)\""

#: ../../help.pm_.c:739
msgid ""
"Here, we select a printing system for your computer. Other OSes may offer\n"
"you one, but Mandrake Linux offers two.\n"
"\n"
" * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n"
"a direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have networked printers. It will handle only\n"
"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
"if this is your first voyage to GNU/Linux. You can change your choices\n"
"after installation by running PrinterDrake from the Mandrake Control Center\n"
"and clicking the expert button.\n"
"\n"
" * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n"
"your local printer and also halfway-around the planet. It is simple and can\n"
"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options."
msgstr ""

#: ../../help.pm_.c:759
#, fuzzy
msgid ""
"DrakX now detects any IDE device present in your computer. It will also\n"
"scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection does not always detect a piece of hardware,\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented with a list of SCSI cards to choose from. Click \"No\" if you\n"
"have no SCSI hardware. If you are unsure, you can check the list of\n"
"hardware detected in your machine by selecting \"See hardware info\" and\n"
"clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n"
"button to return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options which the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options which need to be passed, you\n"
"will need to manually provide options to the driver."
msgstr ""
"DrakX provos ser�i PCI-a(j)n SCSI-a(j)n adaptilo(j)n\n"
"Se DrakX trovas SCSI-an adaptilon kaj scias kiun pelilon �i devas uzi\n"
"�i a�tomate instalos �in (a� ilin).\n"
"\n"
"Se vi havas neniom da SCSI-aj adaptiloj, ISA-an SCSI-an adapilon, a�\n"
"PCI-an SCSI-an adaptilon kiun DrakX ne rekonas DrakX demandos al vi\n"
"se vi havas SCSI-an adaptilon sur via komputilo.  Se vi ne havas adaptilon\n"
"vi povas nur klaki 'Ne'.  Se vi klakos 'Jes', DrakX montros al vi liston de\n"
"peliloj.  Vi povos elekti vian specifan pelilon de la listo.\n"
"\n"
"\n"
"Se vi devas permane elekti vian adaptilon, DrakX demandos\n"
"�u vi deziras specifi opciojn por �i.  Vi devus permesi al DrakX\n"
"esplori la aparaton por la opcioj.  �i tiu kutime bone funkcias.\n"
"\n"
"Se ne, vi bezonos provizi opciojn al la pelilo.\n"
"Reviziu la Instalgvidlibron por sugestoj pri ekstrakado de �i tiu\n"
"informo de Vindozo (se vi havas �in sur via komputilo),\n"
"de dokumenta�o de aparato, a� de la TTT-ejo de la fabrikanto\n"
"(se vi havas atingon al la reto)."

#: ../../help.pm_.c:781
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSes, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot\n"
"prompt to select this boot option;\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension;\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation;\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used;\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a filesystem check before the system becomes ``live''.\n"
"Here, you can override this option;\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support;\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
"selections."
msgstr ""

#: ../../help.pm_.c:828
msgid ""
"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful to\n"
"choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt;\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information;\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt;\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt;\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: ../../help.pm_.c:860
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may (or may not), see the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary;\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary;\n"
"\n"
" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in;\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the correpsonding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used at installation time;\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it will be\n"
"displayed here.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it will be\n"
"displayed here.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:891
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""

#: ../../help.pm_.c:896
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""

#: ../../install2.pm_.c:111
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: ../../install2.pm_.c:167
#, c-format
msgid "You must also format %s"
msgstr ""

#: ../../install_any.pm_.c:423
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: ../../install_any.pm_.c:441
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: ../../install_any.pm_.c:471
msgid "Can't use broadcast with no NIS domain"
msgstr ""

#: ../../install_any.pm_.c:879
#, fuzzy, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "En�ovu disketon en drajvo %s"

#: ../../install_any.pm_.c:883
msgid "This floppy is not FAT formatted"
msgstr ""

#: ../../install_any.pm_.c:895
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""

#: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767
#, c-format
msgid "Error reading file %s"
msgstr "Eraro legante dosiero %s"

#: ../../install_any.pm_.c:1040
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
"novajn dosiersistemojn.  Bonvolu kontroli vian ekipa�on por la ka�zo de �i "
"tiu problemo."

#: ../../install_interactive.pm_.c:21
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
"funkcii.\n"
"Vi povas trovi iun informon pri ili �e: %s"

#: ../../install_interactive.pm_.c:56
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Vi devas havi radikan subdiskon.\n"
"Por �i tiu, kreu subdiskon (a� klaku estantan).\n"
"Sekve elektu la agon \"Surmetingo\" kaj faru �in '/'"

#: ../../install_interactive.pm_.c:61
msgid "You must have a swap partition"
msgstr "Vi devas havi inter�an�an subdiskon"

#: ../../install_interactive.pm_.c:62
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Vi ne havas inter�an�an subdiskon\n"
"\n"
"�u vi deziras da�ri tamen?"

#: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169
#, fuzzy
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Vi devas havi inter�an�an subdiskon"

#: ../../install_interactive.pm_.c:90
msgid "Use free space"
msgstr "Uzu liberan spacon"

#: ../../install_interactive.pm_.c:92
msgid "Not enough free space to allocate new partitions"
msgstr "Mankas sufi�an da libera spaco por disponigi novajn subdiskojn"

#: ../../install_interactive.pm_.c:100
msgid "Use existing partitions"
msgstr "Uzu ekzistantajn subdiskojn"

#: ../../install_interactive.pm_.c:102
msgid "There is no existing partition to use"
msgstr "Ne ekzistas subdiskojn por uzi"

#: ../../install_interactive.pm_.c:109
msgid "Use the Windows partition for loopback"
msgstr "Uzu la Vindoza subdiskon por retrokonektado"

#: ../../install_interactive.pm_.c:112
#, fuzzy
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Kiun subdiskon vi deziras uzi por meti Linux4Win?"

#: ../../install_interactive.pm_.c:114
msgid "Choose the sizes"
msgstr "Elektu la grandecojn"

#: ../../install_interactive.pm_.c:115
msgid "Root partition size in MB: "
msgstr "Radikosubdiska grandeco en MB: "

#: ../../install_interactive.pm_.c:116
msgid "Swap partition size in MB: "
msgstr "Inter�an�a subdiska grandeco en MB: "

#: ../../install_interactive.pm_.c:126
msgid "Use the free space on the Windows partition"
msgstr "Uzu la liberan spacon sur la Vindoza subdisko"

#: ../../install_interactive.pm_.c:129
msgid "Which partition do you want to resize?"
msgstr "Kiun subdiskon vi deziras regrandecigi?"

#: ../../install_interactive.pm_.c:131
msgid "Resizing Windows partition"
msgstr "Kalkulas Vindozajn dosiersistemajn limojn"

#: ../../install_interactive.pm_.c:134
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
"vian subdiskon, la sekvanta eraro okazis: %s"

#: ../../install_interactive.pm_.c:137
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' anta�e"

#: ../../install_interactive.pm_.c:138
#, fuzzy
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"AVERTO!\n"
"\n"
"DrakX nun regrandecigas vian Vindozan subdiskon.  Zorgu: �i tiu operacio "
"estas\n"
"dan�era.  Se vi ne jam faris �in, vi devus anta�e eliru el la instalado, "
"uzi\n"
"\"scandisk\" sub Vindozo (kaj la�vole \"defrag\"), kaj sekve relan�u la\n"
"instaladon.  Anka� vi devus fari rezervan kopion de via dateno.\n"
"Kiam vi estas certa, klaku \"Jeso\"."

#: ../../install_interactive.pm_.c:148
msgid "Which size do you want to keep for Windows on"
msgstr "Kiun grandecon vi deziras teni por Vindozo?"

#: ../../install_interactive.pm_.c:149
#, c-format
msgid "partition %s"
msgstr "subdisko: %s"

#: ../../install_interactive.pm_.c:156
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Regrandeci�o de FAT malsukcesis: %s"

#: ../../install_interactive.pm_.c:171
msgid ""
"There is no FAT partition to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Ne ekzistas FAT-ajn (Dosiero-Atingo-Tablo) subdiskojn por regrandecigi\n"
"a� uzi kiel retrokonektaj subdiskoj (a� ne estas sufi�a da spaco)"

#: ../../install_interactive.pm_.c:177
msgid "Erase entire disk"
msgstr "Forvi�u la tutan diskon"

#: ../../install_interactive.pm_.c:177
msgid "Remove Windows(TM)"
msgstr "Forigu Vindozon"

#: ../../install_interactive.pm_.c:180
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"

#: ../../install_interactive.pm_.c:183
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
"�iuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"

#: ../../install_interactive.pm_.c:191
#, fuzzy
msgid "Custom disk partitioning"
msgstr "Uzu ekzistantajn subdiskojn"

#: ../../install_interactive.pm_.c:195
msgid "Use fdisk"
msgstr "Uzu fdisk"

#: ../../install_interactive.pm_.c:198
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Nun vi povas dispartigi %s.\n"
"Kiam vi fini�os, ne forgesu savi kun `w'."

#: ../../install_interactive.pm_.c:227
#, fuzzy
msgid "You don't have enough free space on your Windows partition"
msgstr "Uzu la liberan spacon sur la Vindoza subdisko"

#: ../../install_interactive.pm_.c:243
#, fuzzy
msgid "I can't find any room for installing"
msgstr "Mi ne povas aldoni plu da subdiskoj"

#: ../../install_interactive.pm_.c:246
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "La Dispartigsor�ilo de DrakX trovis �i tiujn solvojn:"

#: ../../install_interactive.pm_.c:250
#, c-format
msgid "Partitioning failed: %s"
msgstr "Dispartigado malsukcesis: %s"

#: ../../install_interactive.pm_.c:260
msgid "Bringing up the network"
msgstr "Startado de la reto"

#: ../../install_interactive.pm_.c:265
msgid "Bringing down the network"
msgstr "Haltas de la reto"

#: ../../install_steps.pm_.c:76
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Eraro okazis, sed mi ne scias kiel trakti �in bone.\n"
"Da�ri je via propra risko."

#: ../../install_steps.pm_.c:211
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duobla surmetingo %s"

#: ../../install_steps.pm_.c:380
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Iuj gravaj paka�oj ne estis ta�ge instalata.\n"
"A� via KDROM drajvo a� via KDROM disko estas difektita.\n"
"Kontrolu la KDROM sur instalata komputilo per\n"
"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: ../../install_steps.pm_.c:450
#, c-format
msgid "Welcome to %s"
msgstr "Bonvenon al %s"

#: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769
msgid "No floppy drive available"
msgstr "Neniu disketilo havebla"

#: ../../install_steps_auto_install.pm_.c:76
#: ../../install_steps_stdio.pm_.c:22
#, c-format
msgid "Entering step `%s'\n"
msgstr "Eniras pa�on `%s'\n"

#: ../../install_steps_gtk.pm_.c:146
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Via sistemo havas malmulte da risurcoj.  Eble vi havos problemojn pri\n"
"instali Linuks-Mandrejkon.  Se tio okazos, vi povos anstata� provi tekstan\n"
"instaladon.  Por �i tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
"tajpu `text'."

#: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237
msgid "Install Class"
msgstr "Instalklaso"

#: ../../install_steps_gtk.pm_.c:160
#, fuzzy
msgid "Please choose one of the following classes of installation:"
msgstr "Bonvole, elektu unu el la sekvantaj specoj de instalado:"

#: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683
msgid "Package Group Selection"
msgstr "Elektado de Paka�aj Grupoj"

#: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698
msgid "Individual package selection"
msgstr "Elektado de individuaj paka�oj"

#: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Tuta grandeco: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:334
msgid "Bad package"
msgstr "Malbona paka�o"

#: ../../install_steps_gtk.pm_.c:335
#, c-format
msgid "Name: %s\n"
msgstr "Nomo: %s\n"

#: ../../install_steps_gtk.pm_.c:336
#, c-format
msgid "Version: %s\n"
msgstr "Versio: %s\n"

#: ../../install_steps_gtk.pm_.c:337
#, c-format
msgid "Size: %d KB\n"
msgstr "Grandeco: %d KB\n"

#: ../../install_steps_gtk.pm_.c:338
#, c-format
msgid "Importance: %s\n"
msgstr "Graveco: %s\n"

#: ../../install_steps_gtk.pm_.c:360
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Vi ne povas elekti �i tiun paka�on �ar ne estas sufi�e da spaco por instali\n"
"�in."

#: ../../install_steps_gtk.pm_.c:365
msgid "The following packages are going to be installed"
msgstr "La sekvaj paka�oj estos instalataj"

#: ../../install_steps_gtk.pm_.c:366
msgid "The following packages are going to be removed"
msgstr "La sekvaj paka�oj estos malinstalataj"

#: ../../install_steps_gtk.pm_.c:378
msgid "You can't select/unselect this package"
msgstr "Vi ne povas elektu/malelektu �i tiun paka�on"

#: ../../install_steps_gtk.pm_.c:390
msgid "This is a mandatory package, it can't be unselected"
msgstr "�i tiu estas deviga paka�o, vi ne povas malelekti �in"

#: ../../install_steps_gtk.pm_.c:392
msgid "You can't unselect this package. It is already installed"
msgstr "Vi ne povas malelekti �i tiun paka�on.  �i estas jam instalita."

#: ../../install_steps_gtk.pm_.c:395
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"�i tiu paka�o devus esti promociata.\n"
"�u vi certas ke vi deziras malelekti �in?"

#: ../../install_steps_gtk.pm_.c:398
msgid "You can't unselect this package. It must be upgraded"
msgstr "Vi ne povas malelekti �i tiun paka�on.  �i devus esti promociata."

#: ../../install_steps_gtk.pm_.c:403
msgid "Show automatically selected packages"
msgstr ""

#: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#: ../../standalone/drakbackup_.c:4211
msgid "Install"
msgstr "Instalu"

#: ../../install_steps_gtk.pm_.c:407
msgid "Load/Save on floppy"
msgstr "�argu/Konservu sur disketo"

#: ../../install_steps_gtk.pm_.c:408
#, fuzzy
msgid "Updating package selection"
msgstr "Elektado de individuaj paka�oj"

#: ../../install_steps_gtk.pm_.c:413
#, fuzzy
msgid "Minimal install"
msgstr "Eliru instalprogramon"

#: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529
msgid "Choose the packages you want to install"
msgstr "Elektu la paka�ojn kiuj vi deziras instali"

#: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767
msgid "Installing"
msgstr "Instalanta"

#: ../../install_steps_gtk.pm_.c:450
msgid "Estimating"
msgstr "Taksas"

#: ../../install_steps_gtk.pm_.c:457
msgid "Time remaining "
msgstr "Tempo restanta "

#: ../../install_steps_gtk.pm_.c:469
#, fuzzy
msgid "Please wait, preparing installation..."
msgstr "Preparas instaladon"

#: ../../install_steps_gtk.pm_.c:551
#, c-format
msgid "%d packages"
msgstr "%d paka�oj"

#: ../../install_steps_gtk.pm_.c:556
#, c-format
msgid "Installing package %s"
msgstr "Instalanta paka�o %s"

#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:791
#: ../../standalone/drakautoinst_.c:197
msgid "Accept"
msgstr "Akceptu"

#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:791
msgid "Refuse"
msgstr "Malakceptu"

#: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"�an�u vian KDROM!\n"
"\n"
"Bonvole, en�ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
"\"\n"
"kiam vi finos.\n"
"Se vi ne havas �in, klaku \"Nuligu\" por eviti la instaladon de �i tiu KDROM."

#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612
#: ../../install_steps_interactive.pm_.c:804
#: ../../install_steps_interactive.pm_.c:808
msgid "Go on anyway?"
msgstr "�u vi deziras da�ri tamen?"

#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804
msgid "There was an error ordering packages:"
msgstr "Estis eraro ordigi paka�ojn:"

#: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808
msgid "There was an error installing packages:"
msgstr "Estis eraro dum instalado de paka�oj:"

#: ../../install_steps_interactive.pm_.c:10
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:67
msgid "An error occurred"
msgstr "Eraro okazis"

#: ../../install_steps_interactive.pm_.c:85
#, fuzzy
msgid "Do you really want to leave the installation?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../install_steps_interactive.pm_.c:112
msgid "License agreement"
msgstr "Licenca kontrakto"

#: ../../install_steps_interactive.pm_.c:113
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:197
msgid "Are you sure you refuse the licence?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:217
#: ../../install_steps_interactive.pm_.c:995
#: ../../standalone/keyboarddrake_.c:25
msgid "Keyboard"
msgstr "Klavaro"

#: ../../install_steps_interactive.pm_.c:218
#, fuzzy
msgid "Please choose your keyboard layout."
msgstr "Bonvole, elektu vian klavaran aran�on."

#: ../../install_steps_interactive.pm_.c:219
msgid "Here is the full list of keyboards available"
msgstr ""

#: ../../install_steps_interactive.pm_.c:237
msgid "Which installation class do you want?"
msgstr "Kiun instalklaso deziras vi?"

#: ../../install_steps_interactive.pm_.c:241
msgid "Install/Update"
msgstr "Instalu/�isdatigu"

#: ../../install_steps_interactive.pm_.c:241
msgid "Is this an install or an update?"
msgstr "�u tiu �i estas instalado a� �isdatigado?"

#: ../../install_steps_interactive.pm_.c:250
msgid "Recommended"
msgstr "Rekomendata"

#: ../../install_steps_interactive.pm_.c:253
#: ../../install_steps_interactive.pm_.c:256
msgid "Expert"
msgstr "Spertulo"

#: ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#, fuzzy
msgid "Upgrade"
msgstr "�isdatigu"

#: ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#, fuzzy
msgid "Upgrade packages only"
msgstr "Elektado de individuaj paka�oj"

#: ../../install_steps_interactive.pm_.c:282
#, fuzzy
msgid "Please choose the type of your mouse."
msgstr "Bonvole, elektu la specon de via muso."

#: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52
msgid "Mouse Port"
msgstr "Muspordo"

#: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."

#: ../../install_steps_interactive.pm_.c:297
msgid "Buttons emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:299
msgid "Button 2 Emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:300
msgid "Button 3 Emulation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:321
msgid "Configuring PCMCIA cards..."
msgstr "Konfiguras PCMCIA kartojn..."

#: ../../install_steps_interactive.pm_.c:321
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:328
msgid "Configuring IDE"
msgstr "Konfiguras IDE"

#: ../../install_steps_interactive.pm_.c:328
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:345
msgid "No partition available"
msgstr "neniuj haveblaj subdiskoj"

#: ../../install_steps_interactive.pm_.c:348
msgid "Scanning partitions to find mount points"
msgstr ""

#: ../../install_steps_interactive.pm_.c:356
msgid "Choose the mount points"
msgstr "Elektu surmetingojn"

#: ../../install_steps_interactive.pm_.c:386
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: ../../install_steps_interactive.pm_.c:395
#, fuzzy
msgid "No root partition found to perform an upgrade"
msgstr "Elektu la subdiskoj kiuj vi deziras formati"

#: ../../install_steps_interactive.pm_.c:396
msgid "Root Partition"
msgstr "Radikosubdisko"

#: ../../install_steps_interactive.pm_.c:397
msgid "What is the root partition (/) of your system?"
msgstr "Kiu estas la radikosubdisko (/) �e via sistemo?"

#: ../../install_steps_interactive.pm_.c:411
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Vi bezonas restarti por la �an�oj al la subdisktabelo efektivigi"

#: ../../install_steps_interactive.pm_.c:435
msgid "Choose the partitions you want to format"
msgstr "Elektu la subdiskoj kiuj vi deziras formati"

#: ../../install_steps_interactive.pm_.c:436
msgid "Check bad blocks?"
msgstr "�u kontrolas malbonajn blokojn?"

#: ../../install_steps_interactive.pm_.c:463
msgid "Formatting partitions"
msgstr "Formatas subdiskojn"

#: ../../install_steps_interactive.pm_.c:465
#, c-format
msgid "Creating and formatting file %s"
msgstr "Kreas kaj formatas dosieron %s"

#: ../../install_steps_interactive.pm_.c:470
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:472
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nesufi�a inter�an�ospaco por plenumi instalado, bonvolu aldoni iom"

#: ../../install_steps_interactive.pm_.c:479
#, fuzzy
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Ser�as haveblajn paka�ojn"

#: ../../install_steps_interactive.pm_.c:480
msgid "Looking for available packages..."
msgstr "Ser�as haveblajn paka�ojn"

#: ../../install_steps_interactive.pm_.c:483
#, fuzzy
msgid "Looking at packages already installed..."
msgstr "Vi ne povas malelekti �i tiun paka�on.  �i estas jam instalita."

#: ../../install_steps_interactive.pm_.c:487
msgid "Finding packages to upgrade..."
msgstr "Trovadas paka�ojn por promocii"

#: ../../install_steps_interactive.pm_.c:505
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Via komputilo ne havas sufi�e da spaco por instalado a� promocio (%d > %d)."

#: ../../install_steps_interactive.pm_.c:541
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: ../../install_steps_interactive.pm_.c:543
msgid "Load from floppy"
msgstr "�argu de disketo"

#: ../../install_steps_interactive.pm_.c:543
msgid "Save on floppy"
msgstr "Konservu sur disketo"

#: ../../install_steps_interactive.pm_.c:547
msgid "Loading from floppy"
msgstr "�argas de disketo"

#: ../../install_steps_interactive.pm_.c:547
msgid "Package selection"
msgstr "Elektado de Paka�oj"

#: ../../install_steps_interactive.pm_.c:552
#, fuzzy
msgid "Insert a floppy containing package selection"
msgstr "En�ovu disketon en drajvo %s"

#: ../../install_steps_interactive.pm_.c:634
msgid "Selected size is larger than available space"
msgstr ""

#: ../../install_steps_interactive.pm_.c:649
msgid "Type of install"
msgstr ""

#: ../../install_steps_interactive.pm_.c:650
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: ../../install_steps_interactive.pm_.c:653
msgid "With X"
msgstr ""

#: ../../install_steps_interactive.pm_.c:655
msgid "With basic documentation (recommended!)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:656
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:741
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Se vi havas �iujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
"Se vi havas neniujn de �i tiuj KDROM-oj, klaku \"Nuligu\".\n"
"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
"\"."

#: ../../install_steps_interactive.pm_.c:746
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "KDROM etikedata \"%s\""

#: ../../install_steps_interactive.pm_.c:767
msgid "Preparing installation"
msgstr "Preparas instaladon"

#: ../../install_steps_interactive.pm_.c:776
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Instalas paka�o %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:822
msgid "Post-install configuration"
msgstr "Post-instala konfigurado"

#: ../../install_steps_interactive.pm_.c:828
#, fuzzy, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "En�ovu disketon en drajvo %s"

#: ../../install_steps_interactive.pm_.c:834
#, fuzzy, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "En�ovu malplenan disketon en drajvo %s"

#: ../../install_steps_interactive.pm_.c:861
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been released after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:876
#, fuzzy
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr "Kontaktu la spegulon por havigi la liston de havebla paka�oj"

#: ../../install_steps_interactive.pm_.c:881
msgid "Choose a mirror from which to get the packages"
msgstr "Elektu spegulon de kiu havigi la paka�ojn"

#: ../../install_steps_interactive.pm_.c:890
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Kontaktu la spegulon por havigi la liston de havebla paka�oj"

#: ../../install_steps_interactive.pm_.c:918
msgid "Which is your timezone?"
msgstr "kio estas vian horzonon?"

#: ../../install_steps_interactive.pm_.c:923
#, fuzzy
msgid "Hardware clock set to GMT"
msgstr "�u via hardvara horlo�o estas �ustigata en GMT?"

#: ../../install_steps_interactive.pm_.c:924
msgid "Automatic time synchronization (using NTP)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:931
msgid "NTP Server"
msgstr "NTP Servilo"

#: ../../install_steps_interactive.pm_.c:965
#: ../../install_steps_interactive.pm_.c:972
msgid "Remote CUPS server"
msgstr "Malproksima CUPS-a servilo"

#: ../../install_steps_interactive.pm_.c:966
msgid "No printer"
msgstr "Neniu printilo"

#: ../../install_steps_interactive.pm_.c:982
#, fuzzy
msgid "Do you have an ISA sound card?"
msgstr "�u vi havas alian?"

#: ../../install_steps_interactive.pm_.c:984
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""

#: ../../install_steps_interactive.pm_.c:986
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27
msgid "Summary"
msgstr ""

#: ../../install_steps_interactive.pm_.c:994
msgid "Mouse"
msgstr "Muso"

#: ../../install_steps_interactive.pm_.c:996
msgid "Timezone"
msgstr ""

#: ../../install_steps_interactive.pm_.c:997
#: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844
msgid "Printer"
msgstr "Printilo"

#: ../../install_steps_interactive.pm_.c:999
msgid "ISDN card"
msgstr "ISDN-karto"

#: ../../install_steps_interactive.pm_.c:1003
#: ../../install_steps_interactive.pm_.c:1009
msgid "Sound card"
msgstr "Sonkarto"

#: ../../install_steps_interactive.pm_.c:1012
msgid "TV card"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1055
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1084
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm_.c:1056
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1093
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:1057
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1101
#: ../../install_steps_interactive.pm_.c:1107
#, fuzzy
msgid "Windows Domain"
msgstr "NIS Domajno"

#: ../../install_steps_interactive.pm_.c:1058
#: ../../install_steps_interactive.pm_.c:1080
msgid "Local files"
msgstr "Lokaj dosieroj"

#: ../../install_steps_interactive.pm_.c:1067
#: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Difinu pasvorton de root"

#: ../../install_steps_interactive.pm_.c:1069
msgid "No password"
msgstr "Neniu pasvorto"

#: ../../install_steps_interactive.pm_.c:1074
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"�i tiu pasvorto ests tro simpla (�i devas esti almena� %d signoj longa)"

#: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72
#: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144
msgid "Authentication"
msgstr "A�tentikigado"

#: ../../install_steps_interactive.pm_.c:1088
msgid "Authentication LDAP"
msgstr "A�tentikiga LDAP"

#: ../../install_steps_interactive.pm_.c:1089
msgid "LDAP Base dn"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1090
msgid "LDAP Server"
msgstr "LDAP Servilo"

#: ../../install_steps_interactive.pm_.c:1096
msgid "Authentication NIS"
msgstr "A�tentikiga NIS"

#: ../../install_steps_interactive.pm_.c:1097
msgid "NIS Domain"
msgstr "NIS Domajno"

#: ../../install_steps_interactive.pm_.c:1098
msgid "NIS Server"
msgstr "NIS Servilo"

#: ../../install_steps_interactive.pm_.c:1104
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1106
#, fuzzy
msgid "Authentication Windows Domain"
msgstr "A�tentikiga LDAP"

#: ../../install_steps_interactive.pm_.c:1108
#, fuzzy
msgid "Domain Admin User Name"
msgstr "Domajna nomo"

#: ../../install_steps_interactive.pm_.c:1109
msgid "Domain Admin Password"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1144
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
"sendepende de la normala start�argilo.  �i tiu estas utila se vi ne deziras\n"
"instali SILO sur via sistemo, a� alia mastruma sistemo forigas SILO,\n"
"a� SILO ne funkcias kun via aparato-konfigura�o.  Akomodita startdisketo "
"anka�\n"
"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani�i de\n"
"severaj sistemaj paneoj.\n"
"\n"
"Se vi deziras krei startdisketon por via sistemo, en�ovu disketon en la\n"
"unua drajvo kaj klaku \"JES\"."

#: ../../install_steps_interactive.pm_.c:1160
msgid "First floppy drive"
msgstr "Unua disketa drajvo"

#: ../../install_steps_interactive.pm_.c:1161
msgid "Second floppy drive"
msgstr "Dua disketa drajvo"

#: ../../install_steps_interactive.pm_.c:1162
#: ../../printer/printerdrake.pm_.c:2397
msgid "Skip"
msgstr "Ellasu"

#: ../../install_steps_interactive.pm_.c:1167
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
"sendepende de la normala start�argilo.  �i tiu estas utila se vi ne deziras\n"
"instali LILO (a� grub) sur via sistemo, a� alia mastruma sistemo forigas "
"LILO,\n"
"a� LILO ne funkcias kun via komputilo.  Akomodita startdisketo anka� povas\n"
"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resani�i de severaj\n"
"sistemaj paneoj.  �u vi deziras krei startdisketo por via sistemo?\n"
"%s"

#: ../../install_steps_interactive.pm_.c:1173
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1181
msgid "Sorry, no floppy drive available"
msgstr "Beda�rinde, neniu disketdrajvo havebla"

#: ../../install_steps_interactive.pm_.c:1185
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"

#: ../../install_steps_interactive.pm_.c:1189
#, fuzzy, c-format
msgid "Insert a floppy in %s"
msgstr "En�ovu disketon en drajvo %s"

#: ../../install_steps_interactive.pm_.c:1192
msgid "Creating bootdisk..."
msgstr "Kreas startdisketon"

#: ../../install_steps_interactive.pm_.c:1199
msgid "Preparing bootloader..."
msgstr "Preparas start�argilon"

#: ../../install_steps_interactive.pm_.c:1210
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1216
msgid "Do you want to use aboot?"
msgstr "�u vi deziras uzi aboot-on?"

#: ../../install_steps_interactive.pm_.c:1219
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Eraro da�re mi instalis \"aboot\",\n"
"�u mi devus provi perforte instali e� se tio detruas la unuan subdiskon?"

#: ../../install_steps_interactive.pm_.c:1226
#, fuzzy
msgid "Installing bootloader"
msgstr "Instalu restart-�argilon"

#: ../../install_steps_interactive.pm_.c:1232
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Instalado de start�argilo malsukcesis.  La sekvanta eraro okazis:"

#: ../../install_steps_interactive.pm_.c:1240
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1274
#: ../../standalone/drakautoinst_.c:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "En�ovu malplenan disketon en drajvo %s"

#: ../../install_steps_interactive.pm_.c:1278
msgid "Creating auto install floppy..."
msgstr "Kreas a�toinstalan disketon"

#: ../../install_steps_interactive.pm_.c:1289
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1300
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1313
msgid "http://www.mandrakelinux.com/en/90errata.php3"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1318
msgid "Generate auto install floppy"
msgstr "Kreu a�toinstalan disketon"

#: ../../install_steps_interactive.pm_.c:1320
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1325
msgid "Automated"
msgstr "A�tomata"

#: ../../install_steps_interactive.pm_.c:1325
msgid "Replay"
msgstr "Reludu"

#: ../../install_steps_interactive.pm_.c:1328
#, fuzzy
msgid "Save packages selection"
msgstr "Elektado de individuaj paka�oj"

#: ../../install_steps_newt.pm_.c:20
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Linuks-Mandrejka Instalado %s"

#. -PO This string must fit in a 80-char wide text screen
#: ../../install_steps_newt.pm_.c:33
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "

#: ../../interactive.pm_.c:87
msgid "kdesu missing"
msgstr "kdesu mankas"

#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
msgid "consolehelper missing"
msgstr ""

#: ../../interactive.pm_.c:152
#, fuzzy
msgid "Choose a file"
msgstr "Elektu agon"

#: ../../interactive.pm_.c:318
msgid "Advanced"
msgstr ""

#: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117
msgid "Basic"
msgstr ""

#: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158
#: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434
msgid "<- Previous"
msgstr "<- Anta�a"

#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196
#: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087
#: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143
#, fuzzy
msgid "Next"
msgstr "Sekvanta ->"

#: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149
msgid "Bad choice, try again\n"
msgstr "Malbona elekta�o, provu denove\n"

#: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150
#, c-format
msgid "Your choice? (default %s) "
msgstr "Via elekta�o? (defa�lo estas %s) "

#: ../../interactive/stdio.pm_.c:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: ../../interactive/stdio.pm_.c:70
#, fuzzy, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Via elekta�o? (defa�lo estas %s) "

#: ../../interactive/stdio.pm_.c:95
#, fuzzy, c-format
msgid "Button `%s': %s"
msgstr "Opcioj: %s"

#: ../../interactive/stdio.pm_.c:96
#, fuzzy
msgid "Do you want to click on this button?"
msgstr "�u vi deziras uzi aboot-on?"

#: ../../interactive/stdio.pm_.c:105
msgid " enter `void' for void entry"
msgstr ""

#: ../../interactive/stdio.pm_.c:105
#, fuzzy, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Via elekta�o? (defa�lo estas %s) "

#: ../../interactive/stdio.pm_.c:123
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: ../../interactive/stdio.pm_.c:126
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: ../../interactive/stdio.pm_.c:139
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: ../../interactive/stdio.pm_.c:146
msgid "Re-submit"
msgstr ""

#: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188
msgid "Czech (QWERTZ)"
msgstr "�e�a (QWERTZ)"

#: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190
msgid "German"
msgstr "Germana"

#: ../../keyboard.pm_.c:155
msgid "Dvorak"
msgstr "Dvorak-a"

#: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198
msgid "Spanish"
msgstr "Hispana"

#: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199
msgid "Finnish"
msgstr "Finna"

#: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200
msgid "French"
msgstr "Franca"

#: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233
msgid "Norwegian"
msgstr "Norvega"

#: ../../keyboard.pm_.c:160
msgid "Polish"
msgstr "Pola"

#: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241
msgid "Russian"
msgstr "Rusa"

#: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243
msgid "Swedish"
msgstr "Sveda"

#: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259
msgid "UK keyboard"
msgstr "Unui�inta Regna klavaro"

#: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260
msgid "US keyboard"
msgstr "Usona klavaro"

#: ../../keyboard.pm_.c:167
msgid "Albanian"
msgstr "Albana"

#: ../../keyboard.pm_.c:168
msgid "Armenian (old)"
msgstr "Armena (malnova)"

#: ../../keyboard.pm_.c:169
msgid "Armenian (typewriter)"
msgstr "Armena (skribma�ina)"

#: ../../keyboard.pm_.c:170
msgid "Armenian (phonetic)"
msgstr "Armena (fonetika)"

#: ../../keyboard.pm_.c:175
msgid "Azerbaidjani (latin)"
msgstr "Azerbaj�ana (latina)"

#: ../../keyboard.pm_.c:177
msgid "Belgian"
msgstr "Belga"

#: ../../keyboard.pm_.c:178
#, fuzzy
msgid "Bengali"
msgstr "ebligu"

#: ../../keyboard.pm_.c:179
#, fuzzy
msgid "Bulgarian (phonetic)"
msgstr "Armena (fonetika)"

#: ../../keyboard.pm_.c:180
#, fuzzy
msgid "Bulgarian (BDS)"
msgstr "Bulgara"

#: ../../keyboard.pm_.c:181
msgid "Brazilian (ABNT-2)"
msgstr "Brazila (ABNT-2)"

#: ../../keyboard.pm_.c:184
#, fuzzy
msgid "Bosnian"
msgstr "Estona"

#: ../../keyboard.pm_.c:185
msgid "Belarusian"
msgstr "Belarusa"

#: ../../keyboard.pm_.c:186
msgid "Swiss (German layout)"
msgstr "Svisa (germana aran�o)"

#: ../../keyboard.pm_.c:187
msgid "Swiss (French layout)"
msgstr "Svisa (franca aran�o)"

#: ../../keyboard.pm_.c:189
msgid "Czech (QWERTY)"
msgstr "�e�a (QWERTY)"

#: ../../keyboard.pm_.c:191
msgid "German (no dead keys)"
msgstr "Germana (neniom da mortaj klavoj)"

#: ../../keyboard.pm_.c:192
msgid "Devanagari"
msgstr ""

#: ../../keyboard.pm_.c:193
msgid "Danish"
msgstr "Dana"

#: ../../keyboard.pm_.c:194
msgid "Dvorak (US)"
msgstr "Dvorak-a (US)"

#: ../../keyboard.pm_.c:195
msgid "Dvorak (Norwegian)"
msgstr "Dvorak-a (Norvega)"

#: ../../keyboard.pm_.c:196
#, fuzzy
msgid "Dvorak (Swedish)"
msgstr "Dvorak-a (US)"

#: ../../keyboard.pm_.c:197
msgid "Estonian"
msgstr "Estona"

#: ../../keyboard.pm_.c:201
msgid "Georgian (\"Russian\" layout)"
msgstr "Kartvela (\"Rusa\" aran�o)"

#: ../../keyboard.pm_.c:202
msgid "Georgian (\"Latin\" layout)"
msgstr "Kartvela (\"Latina\" aran�o)"

#: ../../keyboard.pm_.c:203
msgid "Greek"
msgstr "Greka"

#: ../../keyboard.pm_.c:204
msgid "Gujarati"
msgstr ""

#: ../../keyboard.pm_.c:205
msgid "Gurmukhi"
msgstr ""

#: ../../keyboard.pm_.c:206
msgid "Hungarian"
msgstr "Hungara"

#: ../../keyboard.pm_.c:207
msgid "Croatian"
msgstr "Kroata"

#: ../../keyboard.pm_.c:208
msgid "Israeli"
msgstr "Israela"

#: ../../keyboard.pm_.c:209
msgid "Israeli (Phonetic)"
msgstr "Israela (fonetika)"

#: ../../keyboard.pm_.c:210
msgid "Iranian"
msgstr "Irana"

#: ../../keyboard.pm_.c:211
msgid "Icelandic"
msgstr "Islanda"

#: ../../keyboard.pm_.c:212
msgid "Italian"
msgstr "Itala"

#: ../../keyboard.pm_.c:213
msgid "Inuktitut"
msgstr ""

#: ../../keyboard.pm_.c:214
msgid "Japanese 106 keys"
msgstr "Japana 106 klavoj"

#: ../../keyboard.pm_.c:217
msgid "Korean keyboard"
msgstr "Korea klavaro"

#: ../../keyboard.pm_.c:218
msgid "Latin American"
msgstr "Latinamerika"

#: ../../keyboard.pm_.c:219
#, fuzzy
msgid "Laotian"
msgstr "Loko"

#: ../../keyboard.pm_.c:220
msgid "Lithuanian AZERTY (old)"
msgstr "Litova AZERTY-a (malnova)"

#: ../../keyboard.pm_.c:222
msgid "Lithuanian AZERTY (new)"
msgstr "Litova AZERTY-a (nova)"

#: ../../keyboard.pm_.c:223
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litova \"numero-vica\" QWERTY-a"

#: ../../keyboard.pm_.c:224
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litova \"fonetika\" QWERTY-a"

#: ../../keyboard.pm_.c:225
#, fuzzy
msgid "Latvian"
msgstr "Loko"

#: ../../keyboard.pm_.c:226
msgid "Malayalam"
msgstr ""

#: ../../keyboard.pm_.c:227
msgid "Macedonian"
msgstr "Macedona"

#: ../../keyboard.pm_.c:228
msgid "Myanmar (Burmese)"
msgstr ""

#: ../../keyboard.pm_.c:229
#, fuzzy
msgid "Mongolian (cyrillic)"
msgstr "Azerbaj�ana (cirila)"

#: ../../keyboard.pm_.c:230
msgid "Maltese (UK)"
msgstr ""

#: ../../keyboard.pm_.c:231
msgid "Maltese (US)"
msgstr ""

#: ../../keyboard.pm_.c:232
msgid "Dutch"
msgstr "Nederlanda"

#: ../../keyboard.pm_.c:234
msgid "Polish (qwerty layout)"
msgstr "Pola (qwerty aran�o)"

#: ../../keyboard.pm_.c:235
msgid "Polish (qwertz layout)"
msgstr "Pola (qwertz aran�o)"

#: ../../keyboard.pm_.c:236
msgid "Portuguese"
msgstr "Portugala"

#: ../../keyboard.pm_.c:237
msgid "Canadian (Quebec)"
msgstr "Kanada (Kebeka)"

#: ../../keyboard.pm_.c:239
msgid "Romanian (qwertz)"
msgstr "Rumana (qwertz-a)"

#: ../../keyboard.pm_.c:240
msgid "Romanian (qwerty)"
msgstr "Rumana (qwerty-a)"

#: ../../keyboard.pm_.c:242
msgid "Russian (Yawerty)"
msgstr "Rusa (Yawerty-a)"

#: ../../keyboard.pm_.c:244
msgid "Slovenian"
msgstr "Slovena"

#: ../../keyboard.pm_.c:245
msgid "Slovakian (QWERTZ)"
msgstr "Slovaka (QWERTZ)"

#: ../../keyboard.pm_.c:246
msgid "Slovakian (QWERTY)"
msgstr "Slovaka (QWERTY)"

#: ../../keyboard.pm_.c:248
#, fuzzy
msgid "Serbian (cyrillic)"
msgstr "Azerbaj�ana (cirila)"

#: ../../keyboard.pm_.c:250
msgid "Tamil (Unicode)"
msgstr ""

#: ../../keyboard.pm_.c:251
msgid "Tamil (TSCII)"
msgstr ""

#: ../../keyboard.pm_.c:252
msgid "Thai keyboard"
msgstr "Taja klavaro"

#: ../../keyboard.pm_.c:254
#, fuzzy
msgid "Tajik keyboard"
msgstr "Taja klavaro"

#: ../../keyboard.pm_.c:255
msgid "Turkish (traditional \"F\" model)"
msgstr "Turka (tradicia \"F\" modelo)"

#: ../../keyboard.pm_.c:256
msgid "Turkish (modern \"Q\" model)"
msgstr "Turka (moderna \"Q\" modelo)"

#: ../../keyboard.pm_.c:258
msgid "Ukrainian"
msgstr "Ukrajna"

#: ../../keyboard.pm_.c:261
msgid "US keyboard (international)"
msgstr "Usona klavaro (internacia)"

#: ../../keyboard.pm_.c:262
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vjetnama \"numero-vica\" QWERTY-a"

#: ../../keyboard.pm_.c:263
#, fuzzy
msgid "Yugoslavian (latin)"
msgstr "Jugoslava (latina/cirila)"

#: ../../keyboard.pm_.c:270
msgid "Right Alt key"
msgstr ""

#: ../../keyboard.pm_.c:271
msgid "Both Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:272
msgid "Control and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:273
msgid "CapsLock key"
msgstr ""

#: ../../keyboard.pm_.c:274
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:275
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:276
msgid "\"Menu\" key"
msgstr ""

#: ../../keyboard.pm_.c:277
msgid "Left \"Windows\" key"
msgstr ""

#: ../../keyboard.pm_.c:278
msgid "Right \"Windows\" key"
msgstr ""

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Cirklaj surmetingoj %s\n"

#: ../../lvm.pm_.c:103
msgid "Remove the logical volumes first\n"
msgstr ""

#: ../../modules.pm_.c:290
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""

#: ../../modules/interactive.pm_.c:16
msgid "You can configure each parameter of the module here."
msgstr ""

#: ../../modules/parameters.pm_.c:18
#, fuzzy
msgid "modinfo is not available"
msgstr "Neniu disketilo havebla"

#: ../../modules/parameters.pm_.c:50
#, fuzzy
msgid "a number"
msgstr "Telefonnumero"

#: ../../modules/parameters.pm_.c:52
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm_.c:52
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: ../../modules/parameters.pm_.c:54
msgid "comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm_.c:54
#, fuzzy
msgid "comma separated strings"
msgstr "Formatu subdiskojn"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - Muso"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Lo�iteka MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Nespecifa PS2 RadoMuso"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48
#, fuzzy
msgid "Microsoft Explorer"
msgstr "Mikrosofta IntelliMouse"

#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70
msgid "1 button"
msgstr "1 butona"

#: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53
msgid "Generic 2 Button Mouse"
msgstr "Nespecifa 2 Butona Muso"

#: ../../mouse.pm_.c:47
msgid "Wheel"
msgstr "Rado"

#: ../../mouse.pm_.c:51
msgid "serial"
msgstr "seria"

#: ../../mouse.pm_.c:54
msgid "Generic 3 Button Mouse"
msgstr "Nespecifa 3 Butona Muso"

#: ../../mouse.pm_.c:55
msgid "Microsoft IntelliMouse"
msgstr "Mikrosofta IntelliMouse"

#: ../../mouse.pm_.c:56
msgid "Logitech MouseMan"
msgstr "Lo�iteka MouseMan"

#: ../../mouse.pm_.c:57
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:59
msgid "Logitech CC Series"
msgstr "Lo�iteka CC serio"

#: ../../mouse.pm_.c:60
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Lo�iteka MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:62
msgid "MM Series"
msgstr "MM Serio"

#: ../../mouse.pm_.c:63
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:64
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Lo�iteka Muso (seria, malnova C7 speco)"

#: ../../mouse.pm_.c:68
#, fuzzy
msgid "busmouse"
msgstr "Neniu Muso"

#: ../../mouse.pm_.c:71
msgid "2 buttons"
msgstr "2 butonoj"

#: ../../mouse.pm_.c:72
msgid "3 buttons"
msgstr "3 butonoj"

#: ../../mouse.pm_.c:75
msgid "none"
msgstr "neniu"

#: ../../mouse.pm_.c:77
msgid "No mouse"
msgstr "Neniu Muso"

#: ../../mouse.pm_.c:490
msgid "Please test the mouse"
msgstr "Bonvole, provu la muson"

#: ../../mouse.pm_.c:491
#, fuzzy
msgid "To activate the mouse,"
msgstr "Bonvole, provu la muson"

#: ../../mouse.pm_.c:492
msgid "MOVE YOUR WHEEL!"
msgstr "MOVU VIAN RADON!"

#: ../../my_gtk.pm_.c:65
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr ""

#: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435
msgid "Finish"
msgstr "Finu"

#: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057
#: ../../ugtk2.pm_.c:435
msgid "Next ->"
msgstr "Sekvanta ->"

#: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926
msgid "Is this correct?"
msgstr "�u tio �i pravas?"

#: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011
msgid "Info"
msgstr "Informo"

#: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036
msgid "Expand Tree"
msgstr "Etendu Arbon"

#: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037
msgid "Collapse Tree"
msgstr "Maletendu Arbon"

#: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038
msgid "Toggle between flat and group sorted"
msgstr "�an�u inter ebena kaj ordigita je grupoj"

#: ../../network/adsl.pm_.c:23
msgid "use pppoe"
msgstr "uzu pppoe"

#: ../../network/adsl.pm_.c:24
msgid "use pptp"
msgstr "uzu pptp"

#: ../../network/adsl.pm_.c:25
msgid "use dhcp"
msgstr "uzu dhcp"

#: ../../network/adsl.pm_.c:26
msgid "Alcatel speedtouch usb"
msgstr ""

#: ../../network/adsl.pm_.c:27
msgid "Sagem (using pppoe) usb"
msgstr ""

#: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Konektu al la Interreto"

#: ../../network/adsl.pm_.c:30
#, fuzzy
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"La plej ofte uzata maniero por konekti kun ADSL estas dhcp + pppoe.\n"
"Tamen, ekzistas konektojn kiuj nur uzas dhcp.\n"
"Se vi ne scias, elektu 'uzu pppoe'"

#: ../../network/adsl.pm_.c:166
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: ../../network/drakfirewall.pm_.c:12
#, fuzzy
msgid "Web Server"
msgstr "Servilo"

#: ../../network/drakfirewall.pm_.c:17
#, fuzzy
msgid "Domain Name Server"
msgstr "Domajna nomo"

#: ../../network/drakfirewall.pm_.c:32
#, fuzzy
msgid "Mail Server"
msgstr "Datumbazoj"

#: ../../network/drakfirewall.pm_.c:37
#, fuzzy
msgid "POP and IMAP Server"
msgstr "LDAP Servilo"

#: ../../network/drakfirewall.pm_.c:111
#, fuzzy
msgid "No network card"
msgstr "neniu retkarto trovita"

#: ../../network/drakfirewall.pm_.c:129
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: ../../network/drakfirewall.pm_.c:135
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: ../../network/drakfirewall.pm_.c:152
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: ../../network/drakfirewall.pm_.c:153
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: ../../network/drakfirewall.pm_.c:159
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""

#: ../../network/drakfirewall.pm_.c:167
msgid "Everything (no firewall)"
msgstr ""

#: ../../network/drakfirewall.pm_.c:169
#, fuzzy
msgid "Other ports"
msgstr "Provu pordojn"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcp-client"
msgstr ""
"Kiun dhcp-an klienton vi deziras uzi?\n"
"La defa�lto estas dhcp-client"

#: ../../network/ethernet.pm_.c:88
#, fuzzy
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lan�u la\n"
"aparatokonfigurilon."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234
msgid "Choose the network interface"
msgstr "Elektu la retan interfacon"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"

#: ../../network/ethernet.pm_.c:176
msgid "no network card found"
msgstr "neniu retkarto trovita"

#: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349
msgid "Configuring network"
msgstr "Konfiguras reto"

#: ../../network/ethernet.pm_.c:201
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Bonvole enigu vian po�tejon se vi scias �in.\n"
"Iuj DHCP-aj serviloj bezonas po�tejon por funkcii.\n"
"Via po�tejo devus esti plene specifita po�tejo,\n"
"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''."

#: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354
msgid "Host name"
msgstr "Po�tejo"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103
#: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171
#: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245
#: ../../network/netconnect.pm_.c:253
#, fuzzy
msgid "Network Configuration Wizard"
msgstr "ISDN-a Konfigura�on"

#: ../../network/isdn.pm_.c:22
#, fuzzy
msgid "External ISDN modem"
msgstr "Interna ISDN-karto"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Interna ISDN-karto"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Kia estas via ISDN-a konekta�o?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""

#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "New configuration (isdn-light)"
msgstr "Konfigura�o de barilo detektata!"

#: ../../network/isdn.pm_.c:54
#, fuzzy
msgid "Old configuration (isdn4net)"
msgstr "Konfigura�o de barilo detektata!"

#: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184
#: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202
#: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219
msgid "ISDN Configuration"
msgstr "ISDN-a Konfigura�on"

#: ../../network/isdn.pm_.c:166
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Elektu vian interretprovizanton.\n"
" Se �in ne estas en la listo, elektu Nelisti�itan"

#: ../../network/isdn.pm_.c:179
#, fuzzy
msgid "Europe protocol"
msgstr "Protokolo"

#: ../../network/isdn.pm_.c:179
#, fuzzy
msgid "Europe protocol (EDSS1)"
msgstr "E�ropo (EDSS1)"

#: ../../network/isdn.pm_.c:181
#, fuzzy
msgid "Protocol for the rest of the world"
msgstr "La cetero de la mondo"

#: ../../network/isdn.pm_.c:181
#, fuzzy
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"La cetero de la mondo \n"
" neniom da D-Kanelo (lukontraktataj lineoj)"

#: ../../network/isdn.pm_.c:185
msgid "Which protocol do you want to use?"
msgstr "Kiun protokolon vi deziras uzi?"

#: ../../network/isdn.pm_.c:196
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""

#: ../../network/isdn.pm_.c:203
msgid "What kind of card do you have?"
msgstr "Kiun specon de karto vi havas?"

#: ../../network/isdn.pm_.c:204
msgid "I don't know"
msgstr "Mi ne scias"

#: ../../network/isdn.pm_.c:204
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:204
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:210
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
"�usta.\n"
"\n"
"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
"por via karto.\n"

#: ../../network/isdn.pm_.c:214
msgid "Abort"
msgstr "�esigu"

#: ../../network/isdn.pm_.c:214
msgid "Continue"
msgstr "�u mi devus da�ri?"

#: ../../network/isdn.pm_.c:220
msgid "Which is your ISDN card?"
msgstr "Kiu estas via ISDN-a karto?"

#: ../../network/isdn.pm_.c:239
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon.  Bonvole "
"elektu\n"
"unu el la PCI-aj kartojn sur la sekvanta ekrano."

#: ../../network/isdn.pm_.c:248
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""
"Neniu ISDN-a PCI-a karto trovata.  Bonvole elektu unu el la PCI-aj kartojn "
"sur\n"
"la sekvanta ekrano."

#: ../../network/modem.pm_.c:57
msgid "Please choose which serial port your modem is connected to."
msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"

#: ../../network/modem.pm_.c:67
msgid "Dialup options"
msgstr "Telefon-konektaj opcioj"

#: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619
msgid "Connection name"
msgstr "Nomo de konekto"

#: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620
msgid "Phone number"
msgstr "Telefonnumero"

#: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621
msgid "Login ID"
msgstr "Salutnomo"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "CHAP"
msgstr ""

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "PAP"
msgstr "PAP (Pasvorta A�tentikigada Protokolo)"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "Script-based"
msgstr "Programeto-bazata"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "Terminal-based"
msgstr "Finaparato-bazata"

#: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624
msgid "Domain name"
msgstr "Domajna nomo"

#: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625
msgid "First DNS Server (optional)"
msgstr "Unu DNS-a Servilo (nedeviga)"

#: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626
msgid "Second DNS Server (optional)"
msgstr "Du DNS-a Servilo (nedeviga)"

#: ../../network/modem.pm_.c:95
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: ../../network/modem.pm_.c:97
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Do nothing"
msgstr "sed ne konformanta(j)"

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Install rpm"
msgstr "Instalu"

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Title"
msgstr "Tabelo"

#: ../../network/netconnect.pm_.c:29
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""

#: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32
#, fuzzy
msgid ""
"\n"
"You can reconfigure your connection."
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:29
#, fuzzy
msgid "You are currently connected to internet."
msgstr "Kiel vi deziras konekti al la Interreto?"

#: ../../network/netconnect.pm_.c:32
#, fuzzy
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr "Konektu al la Interreto / Konfiguru lokan Reton"

#: ../../network/netconnect.pm_.c:32
#, fuzzy
msgid "You are not currently connected to Internet."
msgstr "Kiel vi deziras konekti al la Interreto?"

#: ../../network/netconnect.pm_.c:36
msgid "Connect"
msgstr "Konektu"

#: ../../network/netconnect.pm_.c:37
msgid "Disconnect"
msgstr "Malkonektu"

#: ../../network/netconnect.pm_.c:38
#, fuzzy
msgid "Configure the connection"
msgstr "Konfiguru retumon"

#: ../../network/netconnect.pm_.c:41
msgid "Internet connection & configuration"
msgstr "Interreta konekta�o kaj konfiguro"

#: ../../network/netconnect.pm_.c:94
#, fuzzy, c-format
msgid "We are now going to configure the %s connection."
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:103
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272
#: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77
msgid "Network Configuration"
msgstr "Reta Konfigura�o"

#: ../../network/netconnect.pm_.c:133
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: ../../network/netconnect.pm_.c:157
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""

#: ../../network/netconnect.pm_.c:163
#, fuzzy
msgid "Choose the profile to configure"
msgstr "Elektu la defa�ltan uzulon:"

#: ../../network/netconnect.pm_.c:164
msgid "Use auto detection"
msgstr ""

#: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966
#: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274
#: ../../standalone/drakfloppy_.c:118
msgid "Expert Mode"
msgstr "Spertulore�imo"

#: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364
msgid "Detecting devices..."
msgstr "Detektas aparatojn..."

#: ../../network/netconnect.pm_.c:214
#, fuzzy
msgid "Normal modem connection"
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:214
#, fuzzy, c-format
msgid "detected on port %s"
msgstr "Duobla surmetingo %s"

#: ../../network/netconnect.pm_.c:215
#, fuzzy
msgid "Winmodem connection"
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217
#, fuzzy
msgid "detected"
msgstr "Malproksima printilo"

#: ../../network/netconnect.pm_.c:216
#, fuzzy
msgid "ISDN connection"
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:216
#, c-format
msgid "detected %s"
msgstr ""

#: ../../network/netconnect.pm_.c:217
#, fuzzy
msgid "ADSL connection"
msgstr "LAN Konfigura�o"

#: ../../network/netconnect.pm_.c:218
#, fuzzy
msgid "Cable connection"
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:218
#, fuzzy
msgid "cable connection detected"
msgstr "Konfiguru interretan konekta�on"

#: ../../network/netconnect.pm_.c:219
msgid "LAN connection"
msgstr "LAN Konfigura�o"

#: ../../network/netconnect.pm_.c:219
msgid "ethernet card(s) detected"
msgstr ""

#: ../../network/netconnect.pm_.c:222
#, fuzzy
msgid "Choose the connection you want to configure"
msgstr "Elektu la ilon kiun vi deziras instali"

#: ../../network/netconnect.pm_.c:246
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""

#: ../../network/netconnect.pm_.c:247
#, fuzzy
msgid "Internet connection"
msgstr "Disdividado de Interreta Konekto"

#: ../../network/netconnect.pm_.c:253
msgid "Do you want to start the connection at boot?"
msgstr "�u vi deziras starti vian konekta�on je startado de la sistemo?"

#: ../../network/netconnect.pm_.c:267
msgid "Network configuration"
msgstr "Reta Konfigura�o"

#: ../../network/netconnect.pm_.c:268
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:272
#, fuzzy, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../network/netconnect.pm_.c:282
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""

#: ../../network/netconnect.pm_.c:286
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""

#: ../../network/netconnect.pm_.c:287
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""

#: ../../network/network.pm_.c:278
#, fuzzy
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"AVERTO: �i tiu aparato estis anta�e konfigurata por konekti al la "
"Interreto.\n"
"Simple klaki JES por teni la konfiguron de �i tiu aparato.\n"
"Se vi modifos la subajn kampojn, vi �an�os �i tiun konfiguron."

#: ../../network/network.pm_.c:283
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Bonvole enigu la IP-an konfigur�jon por �i tiu komputilo.\n"
"�iu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
"(ekzemple, 1.2.3.4)."

#: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294
#, c-format
msgid "Configuring network device %s"
msgstr "Konfiguras retan aparaton %s"

#: ../../network/network.pm_.c:294
#, fuzzy, c-format
msgid " (driver %s)"
msgstr "XFree86 pelilo: %s\n"

#: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228
#: ../../standalone/drakconnect_.c:464
msgid "IP address"
msgstr "IP-adreso"

#: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465
#: ../../standalone/drakgw_.c:291
msgid "Netmask"
msgstr "Retmasko"

#: ../../network/network.pm_.c:298
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:298
msgid "Automatic IP"
msgstr "A�tomata IP"

#: ../../network/network.pm_.c:299
#, fuzzy
msgid "Start at boot"
msgstr "Kreu pra�argdisketon"

#: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adreso devus esti en la notacio 1.2.3.4"

#: ../../network/network.pm_.c:326
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0'."
msgstr ""

#: ../../network/network.pm_.c:330
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0'."
msgstr ""

#: ../../network/network.pm_.c:350
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Bonvole enigu vian po�tejon.\n"
"Via po�tejo devus esti plene specifita po�tejo,\n"
"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
"Vi anka� povas enigi la IP-adreson de la prokura kluzo se via havas unu."

#: ../../network/network.pm_.c:355
msgid "DNS server"
msgstr "DNA servilo"

#: ../../network/network.pm_.c:356
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: ../../network/network.pm_.c:358
msgid "Gateway device"
msgstr "Prokura kluzaparato"

#: ../../network/network.pm_.c:363
#, fuzzy
msgid "DNS server address should be in format 1.2.3.4"
msgstr "IP-adreso devus esti en la notacio 1.2.3.4"

#: ../../network/network.pm_.c:367
#, fuzzy
msgid "Gateway address should be in format 1.2.3.4"
msgstr "IP-adreso devus esti en la notacio 1.2.3.4"

#: ../../network/network.pm_.c:381
msgid "Proxies configuration"
msgstr "Konfigurado de prokuraj serviloj"

#: ../../network/network.pm_.c:382
msgid "HTTP proxy"
msgstr "HTTP prokura servilo"

#: ../../network/network.pm_.c:383
msgid "FTP proxy"
msgstr "FTP prokura servilo"

#: ../../network/network.pm_.c:384
msgid "Track network card id (useful for laptops)"
msgstr ""

#: ../../network/network.pm_.c:387
msgid "Proxy should be http://..."
msgstr "Prokura servilo devus esti http://..."

#: ../../network/network.pm_.c:388
#, fuzzy
msgid "Url should begin with 'ftp:' or 'http:'"
msgstr "Prokura servilo devus esti http://..."

#: ../../network/shorewall.pm_.c:26
msgid "Firewalling configuration detected!"
msgstr "Konfigura�o de barilo detektata!"

#: ../../network/shorewall.pm_.c:27
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Averto.  Ekzistanta konfigura�o de barilo detektata.  Vi eble devas permane\n"
"fiksi �in poste de la instalado."

#: ../../network/tools.pm_.c:57
msgid "Internet configuration"
msgstr "Interreta Konfigurado"

#: ../../network/tools.pm_.c:58
msgid "Do you want to try to connect to the Internet now?"
msgstr "�u vi deziras provi konekti al la interreto nun?"

#: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193
#, fuzzy
msgid "Testing your connection..."
msgstr "Konfiguru interretan konekta�on"

#: ../../network/tools.pm_.c:70
#, fuzzy
msgid "The system is now connected to Internet."
msgstr "Kiel vi deziras konekti al la Interreto?"

#: ../../network/tools.pm_.c:71
msgid "For security reason, it will be disconnected now."
msgstr ""

#: ../../network/tools.pm_.c:72
#, fuzzy
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr "Konektu al la Interreto / Konfiguru lokan Reton"

#: ../../network/tools.pm_.c:96
msgid "Connection Configuration"
msgstr "Konfigurado de Konekto"

#: ../../network/tools.pm_.c:97
msgid "Please fill or check the field below"
msgstr "Bonvole plenigu a� marku la suban kampon"

#: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605
msgid "Card IRQ"
msgstr "IRQ de Karto"

#: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606
msgid "Card mem (DMA)"
msgstr "Memoro de Karto (DMA)"

#: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607
msgid "Card IO"
msgstr "I/O (Eneligo) de Karto"

#: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608
msgid "Card IO_0"
msgstr "I/O 0 (Eneligo 0) de Karto"

#: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609
msgid "Card IO_1"
msgstr "I/O 1 (Eneligo 1) de Karto"

#: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610
msgid "Your personal phone number"
msgstr "Via persona telefonnumero"

#: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611
msgid "Provider name (ex provider.net)"
msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"

#: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612
msgid "Provider phone number"
msgstr "Telefonnumero de interretprovizanto"

#: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613
msgid "Provider dns 1 (optional)"
msgstr "Provizanto DNS 1 (nedeviga)"

#: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614
msgid "Provider dns 2 (optional)"
msgstr "Provizanto DNS 2 (nedeviga)"

#: ../../network/tools.pm_.c:109
#, fuzzy
msgid "Choose your country"
msgstr "Elektu vian klavaron"

#: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617
msgid "Dialing mode"
msgstr "Diskuma modalo"

#: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629
#, fuzzy
msgid "Connection speed"
msgstr "Speco de konekto"

#: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630
#, fuzzy
msgid "Connection timeout (in sec)"
msgstr "Speco de konekto"

#: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615
msgid "Account Login (user name)"
msgstr "Konta Salutnomo (uzula nomo)"

#: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616
#: ../../standalone/drakconnect_.c:647
msgid "Account Password"
msgstr "Konta Pasvorto"

#: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132
msgid "United Kingdom"
msgstr ""

#: ../../partition_table.pm_.c:603
msgid "mount failed: "
msgstr "muntado malsukcesis: "

#: ../../partition_table.pm_.c:667
msgid "Extended partition not supported on this platform"
msgstr "�i tiu platformo ne subtenas etendatajn subdiskojn"

#: ../../partition_table.pm_.c:685
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Vi havas truon en via subdisktabelo sed mi ne povas uzi �in.\n"
"La sola solvo estas movi viajn �efajn subdiskojn por situigi la truon\n"
"apud la etendataj subdiskoj."

#: ../../partition_table.pm_.c:774
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Resta�ris el dosiero %s malsukcesis: %s"

#: ../../partition_table.pm_.c:776
msgid "Bad backup file"
msgstr "Malbona rezerva dosiero"

#: ../../partition_table.pm_.c:796
#, c-format
msgid "Error writing to file %s"
msgstr "Eraro skribante al dosiero %s"

#: ../../partition_table/raw.pm_.c:192
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""

#: ../../pkgs.pm_.c:26
msgid "must have"
msgstr "havenda"

#: ../../pkgs.pm_.c:27
msgid "important"
msgstr "grava(j)"

#: ../../pkgs.pm_.c:28
msgid "very nice"
msgstr "tre agrabla(j)"

#: ../../pkgs.pm_.c:29
msgid "nice"
msgstr "agrabla(j)"

#: ../../pkgs.pm_.c:30
msgid "maybe"
msgstr "elbe"

#: ../../printer/data.pm_.c:18
msgid "PDQ - Print, Don't Queue"
msgstr ""

#: ../../printer/data.pm_.c:19
msgid "PDQ"
msgstr ""

#: ../../printer/data.pm_.c:30
msgid "LPD - Line Printer Daemon"
msgstr ""

#: ../../printer/data.pm_.c:31
msgid "LPD"
msgstr ""

#: ../../printer/data.pm_.c:51
msgid "LPRng - LPR New Generation"
msgstr ""

#: ../../printer/data.pm_.c:52
msgid "LPRng"
msgstr ""

#: ../../printer/data.pm_.c:75
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677
msgid "CUPS"
msgstr ""

#: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213
#: ../../printer/detect.pm_.c:250
msgid "Unknown Model"
msgstr ""

#: ../../printer/main.pm_.c:26
msgid "Local printer"
msgstr "Loka printilo"

#: ../../printer/main.pm_.c:27
msgid "Remote printer"
msgstr "Malproksima printilo"

#: ../../printer/main.pm_.c:28
#, fuzzy
msgid "Printer on remote CUPS server"
msgstr "Malproksima CUPS-a servilo"

#: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835
#, fuzzy
msgid "Printer on remote lpd server"
msgstr "Malproksimaj lpd servilo"

#: ../../printer/main.pm_.c:30
msgid "Network printer (TCP/Socket)"
msgstr "Reta Printilo (TCP/ingo)"

#: ../../printer/main.pm_.c:31
#, fuzzy
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/Vindozo 95/98/NT"

#: ../../printer/main.pm_.c:32
#, fuzzy
msgid "Printer on NetWare server"
msgstr "Printservilo"

#: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839
#, fuzzy
msgid "Enter a printer device URI"
msgstr "Printila Aparato URI"

#: ../../printer/main.pm_.c:34
msgid "Pipe job into a command"
msgstr ""

#: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478
#: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228
msgid "Unknown model"
msgstr ""

#: ../../printer/main.pm_.c:317
#, fuzzy
msgid "Local Printers"
msgstr "Loka printilo"

#: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678
#, fuzzy
msgid "Remote Printers"
msgstr "Malproksima printilo"

#: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381
#, c-format
msgid " on parallel port \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383
#, c-format
msgid ", USB printer \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:334
#, c-format
msgid ", multi-function device on parallel port \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:337
msgid ", multi-function device on USB"
msgstr ""

#: ../../printer/main.pm_.c:339
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: ../../printer/main.pm_.c:341
msgid ", multi-function device"
msgstr ""

#: ../../printer/main.pm_.c:344
#, fuzzy, c-format
msgid ", printing to %s"
msgstr "Eraro skribante al dosiero %s"

#: ../../printer/main.pm_.c:346
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:348
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: ../../printer/main.pm_.c:352
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:356
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:358
#, c-format
msgid ", using command %s"
msgstr ""

#: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer/main.pm_.c:647
#, fuzzy, c-format
msgid "(on %s)"
msgstr "(modulo %s)"

#: ../../printer/main.pm_.c:649
msgid "(on this machine)"
msgstr ""

#: ../../printer/main.pm_.c:674
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "IP de SMB servilo"

#: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888
#: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120
#: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197
#: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354
msgid " (Default)"
msgstr " (Defa�lta)"

#: ../../printer/printerdrake.pm_.c:27
msgid "Select Printer Connection"
msgstr "Elektu Printilan Konekton"

#: ../../printer/printerdrake.pm_.c:28
msgid "How is the printer connected?"
msgstr "Kiel estas la printilo konektata?"

#: ../../printer/printerdrake.pm_.c:30
#, fuzzy
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure here; these "
"printers will be automatically detected."
msgstr ""
"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
"�i tie; printiloj estos a�tomate dektektataj.  Se vi havas dubojn,\n"
"elektu \"Malproksima CUPS servilo\"."

#: ../../printer/printerdrake.pm_.c:38
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""

#: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950
#, fuzzy
msgid "CUPS configuration"
msgstr "LAN Konfigura�o"

#: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951
#, fuzzy
msgid "Specify CUPS server"
msgstr "Malproksima CUPS-a servilo"

#: ../../printer/printerdrake.pm_.c:83
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"do not have to configure anything; the CUPS servers inform your machine "
"automatically about their printers. All printers currently known to your "
"machine are listed in the \"Remote printers\" section in the main window of "
"Printerdrake. When your CUPS server is not in your local network, you have "
"to enter the CUPS server IP address and optionally the port number to get "
"the printer information from the server, otherwise leave these fields blank."
msgstr ""

#: ../../printer/printerdrake.pm_.c:84
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your network "
"environment, so that you can access the printers on the CUPS servers in your "
"local network. If this does not work correctly, turn off \"Automatic CUPS "
"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
"forget to restart CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printer/printerdrake.pm_.c:88
#, fuzzy
msgid "The IP address should look like 192.168.1.20"
msgstr "IP-adreso devus esti en la notacio 1.2.3.4"

#: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041
msgid "The port number should be an integer!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:99
#, fuzzy
msgid "CUPS server IP"
msgstr "IP de SMB servilo"

#: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061
#: ../../standalone/harddrake2_.c:63
msgid "Port"
msgstr "Pordo"

#: ../../printer/printerdrake.pm_.c:102
#, fuzzy
msgid "Automatic CUPS configuration"
msgstr "Post-instala konfigurado"

#: ../../printer/printerdrake.pm_.c:159
#, fuzzy
msgid "Checking your system..."
msgstr "Kiun printsistemo vi deziras uzi?"

#: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226
#: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481
#: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133
#: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343
#: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436
#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630
#: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701
#: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731
#: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809
#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911
#: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281
#: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369
#: ../../standalone/printerdrake_.c:47
#, fuzzy
msgid "Printerdrake"
msgstr "Printilo"

#: ../../printer/printerdrake.pm_.c:167
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: ../../printer/printerdrake.pm_.c:179
#, fuzzy
msgid ""
"The following printers\n"
"\n"
msgstr "La sekvaj paka�oj estos malinstalataj"

#: ../../printer/printerdrake.pm_.c:180
#, fuzzy
msgid ""
"The following printer\n"
"\n"
msgstr "La sekvaj paka�oj estos malinstalataj"

#: ../../printer/printerdrake.pm_.c:182
msgid ""
"\n"
"and one unknown printer are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:184
#, c-format
msgid ""
"\n"
"and %d unknown printers are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:187
msgid ""
"\n"
"are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:187
msgid ""
"\n"
"is "
msgstr ""

#: ../../printer/printerdrake.pm_.c:189
#, fuzzy
msgid "directly connected to your system"
msgstr "Via komputilo ne havas retadaptilon!"

#: ../../printer/printerdrake.pm_.c:192
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm_.c:194
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm_.c:200
#, fuzzy
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"

#: ../../printer/printerdrake.pm_.c:214
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:215
#, fuzzy
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "�u vi deziras provi printado?"

#: ../../printer/printerdrake.pm_.c:217
#, fuzzy
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "�u vi deziras starti vian konekta�on je startado de la sistemo?"

#: ../../printer/printerdrake.pm_.c:218
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:219
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270
#: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933
#: ../../printer/printerdrake.pm_.c:3060
#, fuzzy
msgid "Add a new printer"
msgstr "Neniu printilo"

#: ../../printer/printerdrake.pm_.c:259
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: ../../printer/printerdrake.pm_.c:272
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and you Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:289
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:307
#, fuzzy
msgid "Auto-detect printers connected to this machine"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:310
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: ../../printer/printerdrake.pm_.c:313
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: ../../printer/printerdrake.pm_.c:329
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""

#: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538
#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978
#, fuzzy
msgid "Printer auto-detection"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:385
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:387
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/Vindozo 95/98/NT"

#: ../../printer/printerdrake.pm_.c:391
#, fuzzy, c-format
msgid "Detected %s"
msgstr "Duobla surmetingo %s"

#: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423
#: ../../printer/printerdrake.pm_.c:440
#, c-format
msgid "Printer on parallel port \\/*%s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425
#: ../../printer/printerdrake.pm_.c:443
#, c-format
msgid "USB printer \\/*%s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:399
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Reta Printilo (TCP/ingo)"

#: ../../printer/printerdrake.pm_.c:401
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "SMB/Vindozo 95/98/NT"

#: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547
#, fuzzy
msgid "Local Printer"
msgstr "Loka printilo"

#: ../../printer/printerdrake.pm_.c:526
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm_.c:530
#, fuzzy
msgid "You must enter a device or file name!"
msgstr "Printila Aparato URI"

#: ../../printer/printerdrake.pm_.c:539
#, fuzzy
msgid "No printer found!"
msgstr "Loka printilo"

#: ../../printer/printerdrake.pm_.c:548
#, fuzzy
msgid "Available printers"
msgstr "Loka printilo"

#: ../../printer/printerdrake.pm_.c:552
msgid ""
"The following printer was auto-detected, if it is not the one you want to "
"configure, enter a device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:553
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up or enter a device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:555
msgid ""
"The following printer was auto-detected. The configuration of the printer "
"will work fully automatically. If your printer was not correctly detected or "
"if you prefer a customized printer configuration, turn on \"Manual "
"configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:556
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up. The configuration of the printer will work fully "
"automatically. If your printer was not correctly detected or if you prefer a "
"customized printer configuration, turn on \"Manual configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:558
msgid ""
"Please choose the port where your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:559
#, fuzzy
msgid "Please choose the port where your printer is connected to."
msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"

#: ../../printer/printerdrake.pm_.c:561
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm_.c:565
#, fuzzy
msgid "You must choose/enter a printer/device!"
msgstr "Printila Aparato URI"

#: ../../printer/printerdrake.pm_.c:584
#, fuzzy
msgid "Manual configuration"
msgstr "Interreta Konfigurado"

#: ../../printer/printerdrake.pm_.c:633
msgid "Remote lpd Printer Options"
msgstr "Malproksimaj lpd Printilaj Opcioj"

#: ../../printer/printerdrake.pm_.c:634
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Por uzi malproksima lpd printvico, vi devas provizi la po�tejon de la\n"
"printservilo kaj la printviconomon �e tiu servilo en kiun taskoj devus\n"
"esti metata."

#: ../../printer/printerdrake.pm_.c:635
#, fuzzy
msgid "Remote host name"
msgstr "Malproksima po�tejo"

#: ../../printer/printerdrake.pm_.c:636
#, fuzzy
msgid "Remote printer name"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:639
#, fuzzy
msgid "Remote host name missing!"
msgstr "Malproksima po�tejo"

#: ../../printer/printerdrake.pm_.c:643
#, fuzzy
msgid "Remote printer name missing!"
msgstr "Malproksima po�tejo"

#: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "Duobla surmetingo %s"

#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978
#, fuzzy
msgid "Scanning network..."
msgstr "Startas vian konekta�on..."

#: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Haltas de la reto"

#: ../../printer/printerdrake.pm_.c:795
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"

#: ../../printer/printerdrake.pm_.c:796
#, fuzzy
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Por printi al SMB-a printilo, vi devas provizi la SMB po�tejon (Notu! �i "
"eble\n"
"estas malsama de �ia TCP/IP nomo!) kaj eble la IP-adreson de la "
"printservilo,\n"
"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
"ta�gan salutnomon, pasvorton, kaj laborgrupan informon."

#: ../../printer/printerdrake.pm_.c:797
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: ../../printer/printerdrake.pm_.c:799
msgid "SMB server host"
msgstr "Po�tejo de SMB servilo"

#: ../../printer/printerdrake.pm_.c:800
msgid "SMB server IP"
msgstr "IP de SMB servilo"

#: ../../printer/printerdrake.pm_.c:801
msgid "Share name"
msgstr "Opuza nomo"

#: ../../printer/printerdrake.pm_.c:804
msgid "Workgroup"
msgstr "Laborgrupo"

#: ../../printer/printerdrake.pm_.c:806
#, fuzzy
msgid "Auto-detected"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:816
msgid "Either the server name or the server's IP must be given!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:820
msgid "Samba share name missing!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:826
msgid "SECURITY WARNING!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:827
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:837
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:840
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:911
msgid "NetWare Printer Options"
msgstr "NetWare Printilaj Opcioj"

#: ../../printer/printerdrake.pm_.c:912
#, fuzzy
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
"nomon (Notu! �i eble estas malsama de �ia TCP/IP nomo!) aldone al la\n"
"printvican nomon por la printilo vi deziras atingi kaj iun ajn ta�gan\n"
"salutnomon kaj pasvorton."

#: ../../printer/printerdrake.pm_.c:913
msgid "Printer Server"
msgstr "Printservilo"

#: ../../printer/printerdrake.pm_.c:914
msgid "Print Queue Name"
msgstr "Printvica Nomo"

#: ../../printer/printerdrake.pm_.c:919
msgid "NCP server name missing!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:923
msgid "NCP queue name missing!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1030
#, fuzzy
msgid "TCP/Socket Printer Options"
msgstr "Ing-Printilaj Opcioj"

#: ../../printer/printerdrake.pm_.c:1032
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) into the input fields."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1033
#, fuzzy
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Por printi al inga printilo, vi bezonas provizi la\n"
"po�tejon de la printilo kaj opcie la pordnumeron."

#: ../../printer/printerdrake.pm_.c:1037
#, fuzzy
msgid "Printer host name or IP missing!"
msgstr "Printilaj Po�tejo"

#: ../../printer/printerdrake.pm_.c:1059
#, fuzzy
msgid "Printer host name or IP"
msgstr "Printilaj Po�tejo"

#: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109
msgid "Printer Device URI"
msgstr "Printila Aparato URI"

#: ../../printer/printerdrake.pm_.c:1108
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1123
msgid "A valid URI must be entered!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1463
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1464
msgid "Name of printer"
msgstr "Nomo de printilo"

#: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38
msgid "Description"
msgstr "Priskribo"

#: ../../printer/printerdrake.pm_.c:1466
msgid "Location"
msgstr "Loko"

#: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599
#, fuzzy
msgid "Reading printer database..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:1482
#, fuzzy
msgid "Preparing printer database..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:1578
#, fuzzy
msgid "Your printer model"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:1579
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587
#, fuzzy
msgid "The model is correct"
msgstr "�u tio �i pravas?"

#: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586
#: ../../printer/printerdrake.pm_.c:1589
#, fuzzy
msgid "Select model manually"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:1606
#, fuzzy
msgid "Printer model selection"
msgstr "Printilan Konekton"

#: ../../printer/printerdrake.pm_.c:1607
#, fuzzy
msgid "Which printer model do you have?"
msgstr "Kiun specon de printilo vi havas?"

#: ../../printer/printerdrake.pm_.c:1608
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Search the correct model in the list when the cursor is "
"standing on a wrong model or on \"Raw printer\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1611
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1697
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "Interreta Konfigurado"

#: ../../printer/printerdrake.pm_.c:1698
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "Interreta Konfigurado"

#: ../../printer/printerdrake.pm_.c:1719
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1746
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1749
msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1750
msgid ""
"Your printer belongs to the group of GDI laser printers (winprinters) sold "
"by different manufacturers which uses the Zenographics ZJ-stream raster "
"format for the data sent to the printer. The driver for these printers is "
"still in a very early development stage and so it will perhaps not always "
"work properly. Especially it is possible that the printer only works when "
"you choose the A4 paper size.\n"
"\n"
"Some of these printers, as the HP LaserJet 1000, for which this driver was "
"originally created, need their firmware to be uploaded to them after they "
"are turned on. In the case of the HP LaserJet 1000 you have to search the "
"printer's Windows driver CD or your Windows partition for the file "
"\"sihp1000.img\" and upload the file to the printer with one of the "
"following commands:\n"
"\n"
"     lpr -o raw sihp1000.img\n"
"     cat sihp1000.img > /dev/usb/lp0\n"
"\n"
"The first command can be given by any normal user, the second must be given "
"as root. After having done so you can print normally.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1972
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1981
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1985
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1989
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2028
#, fuzzy, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "�u vi deziras provi printado?"

#: ../../printer/printerdrake.pm_.c:2051
#, fuzzy
msgid "Test pages"
msgstr "Provu pordojn"

#: ../../printer/printerdrake.pm_.c:2052
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2056
#, fuzzy
msgid "No test pages"
msgstr "Jes, printu amba� de la provpa�ojn"

#: ../../printer/printerdrake.pm_.c:2057
#, fuzzy
msgid "Print"
msgstr "Printilo"

#: ../../printer/printerdrake.pm_.c:2114
#, fuzzy
msgid "Standard test page"
msgstr "La�norma"

#: ../../printer/printerdrake.pm_.c:2117
msgid "Alternative test page (Letter)"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2120
#, fuzzy
msgid "Alternative test page (A4)"
msgstr "Printas provpa�o(j)n..."

#: ../../printer/printerdrake.pm_.c:2122
#, fuzzy
msgid "Photo test page"
msgstr "Printas provpa�o(j)n..."

#: ../../printer/printerdrake.pm_.c:2126
#, fuzzy
msgid "Do not print any test page"
msgstr "Printas provpa�o(j)n..."

#: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285
msgid "Printing test page(s)..."
msgstr "Printas provpa�o(j)n..."

#: ../../printer/printerdrake.pm_.c:2159
#, fuzzy, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Provpa�o(j)n estis sendataj al la printila demono.\n"
"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
"Printada stato:\n"
"%s\n"
"\n"
"�u �i �uste funkcias?"

#: ../../printer/printerdrake.pm_.c:2163
#, fuzzy
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Provpa�o(j)n estis sendataj al la printila demono.\n"
"�i tiu eble postulas iom da tempo anta� ol la printilo komencas.\n"
"�u �i �uste funkcias?"

#: ../../printer/printerdrake.pm_.c:2170
msgid "Did it work properly?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229
#, fuzzy
msgid "Raw printer"
msgstr "Neniu printilo"

#: ../../printer/printerdrake.pm_.c:2216
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2218
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238
#: ../../printer/printerdrake.pm_.c:2248
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2228
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245
#: ../../printer/printerdrake.pm_.c:2255
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2253
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2257
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2261
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2271
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Haltas de la reto"

#: ../../printer/printerdrake.pm_.c:2272
#, fuzzy, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Haltas de la reto"

#: ../../printer/printerdrake.pm_.c:2274
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Haltas de la reto"

#: ../../printer/printerdrake.pm_.c:2275
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Haltas de la reto"

#: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281
#: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283
#: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307
#: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156
#: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695
#: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118
msgid "Close"
msgstr "Malfermu"

#: ../../printer/printerdrake.pm_.c:2281
#, fuzzy
msgid "Print option list"
msgstr "Printilaj opcioj"

#: ../../printer/printerdrake.pm_.c:2301
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2322
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702
#: ../../printer/printerdrake.pm_.c:2990
#, fuzzy
msgid "Reading printer data..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391
#: ../../printer/printerdrake.pm_.c:2426
#, fuzzy
msgid "Transfer printer configuration"
msgstr "Interreta Konfigurado"

#: ../../printer/printerdrake.pm_.c:2365
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2368
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2370
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2372
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2374
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2375
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2376
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2379
msgid "Do not transfer printers"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396
msgid "Transfer"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2392
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2400
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2405
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2413
#, fuzzy
msgid "New printer name"
msgstr "Neniu printilo"

#: ../../printer/printerdrake.pm_.c:2416
#, c-format
msgid "Transferring %s..."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2427
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2437
#, fuzzy
msgid "Refreshing printer data..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516
#: ../../printer/printerdrake.pm_.c:2528
msgid "Configuration of a remote printer"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2446
#, fuzzy
msgid "Starting network..."
msgstr "Startas vian konekta�on..."

#: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483
#: ../../printer/printerdrake.pm_.c:2485
#, fuzzy
msgid "Configure the network now"
msgstr "Konfiguru retumon"

#: ../../printer/printerdrake.pm_.c:2480
#, fuzzy
msgid "Network functionality not configured"
msgstr "Ekrano ne estas konfigurata"

#: ../../printer/printerdrake.pm_.c:2481
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2484
#, fuzzy
msgid "Go on without configuring the network"
msgstr "Konfiguras reto"

#: ../../printer/printerdrake.pm_.c:2518
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network gets accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""

#: ../../printer/printerdrake.pm_.c:2519
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2529
#, fuzzy
msgid "Restarting printing system..."
msgstr "Kiun printsistemo vi deziras uzi?"

#: ../../printer/printerdrake.pm_.c:2568
#, fuzzy
msgid "high"
msgstr "Alta"

#: ../../printer/printerdrake.pm_.c:2568
#, fuzzy
msgid "paranoid"
msgstr "Paranoja"

#: ../../printer/printerdrake.pm_.c:2569
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2570
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2604
#, fuzzy
msgid "Starting the printing system at boot time"
msgstr "Kiun printsistemo vi deziras uzi?"

#: ../../printer/printerdrake.pm_.c:2605
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765
msgid "Checking installed software..."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2630
#, fuzzy, c-format
msgid "Removing %s ..."
msgstr "Distingivo: %s\n"

#: ../../printer/printerdrake.pm_.c:2636
#, fuzzy, c-format
msgid "Installing %s ..."
msgstr "Instalanta paka�o %s"

#: ../../printer/printerdrake.pm_.c:2685
#, fuzzy
msgid "Select Printer Spooler"
msgstr "Elektu Printilan Konekton"

#: ../../printer/printerdrake.pm_.c:2686
#, fuzzy
msgid "Which printing system (spooler) do you want to use?"
msgstr "Kiun printsistemo vi deziras uzi?"

#: ../../printer/printerdrake.pm_.c:2720
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Konfiguru Printilon"

#: ../../printer/printerdrake.pm_.c:2731
#, fuzzy
msgid "Installing Foomatic..."
msgstr "Instalanta paka�o %s"

#: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838
#: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300
msgid "Printer options"
msgstr "Printilaj opcioj"

#: ../../printer/printerdrake.pm_.c:2810
#, fuzzy
msgid "Preparing Printerdrake..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369
#, fuzzy
msgid "Configuring applications..."
msgstr "Konfiguru Printilon"

#: ../../printer/printerdrake.pm_.c:2845
#, fuzzy
msgid "Would you like to configure printing?"
msgstr "�u vi deziras konfiguri printilon?"

#: ../../printer/printerdrake.pm_.c:2857
msgid "Printing system: "
msgstr ""

#: ../../printer/printerdrake.pm_.c:2915
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star Office/"
"OpenOffice.org/GIMP."
msgstr ""
"Jen la sekvantaj printvicoj.\n"
"Vi povas aldoni pli a� �an�i la ekzistantajn."

#: ../../printer/printerdrake.pm_.c:2916
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Jen la sekvantaj printvicoj.\n"
"Vi povas aldoni pli a� �an�i la ekzistantajn."

#: ../../printer/printerdrake.pm_.c:2942
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2960
#, fuzzy
msgid "Change the printing system"
msgstr "Konfiguru retumon"

#: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274
msgid "Normal Mode"
msgstr "Normala Modalo"

#: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176
#: ../../printer/printerdrake.pm_.c:3363
#, fuzzy
msgid "Do you want to configure another printer?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../printer/printerdrake.pm_.c:3211
#, fuzzy
msgid "Modify printer configuration"
msgstr "Interreta Konfigurado"

#: ../../printer/printerdrake.pm_.c:3213
#, fuzzy, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../printer/printerdrake.pm_.c:3217
msgid "Do it!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271
#, fuzzy
msgid "Printer connection type"
msgstr "Disdividado de Interreta Konekto"

#: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275
#, fuzzy
msgid "Printer name, description, location"
msgstr "Printilan Konekton"

#: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293
msgid "Printer manufacturer, model, driver"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294
msgid "Printer manufacturer, model"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304
msgid "Set this printer as the default"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319
#, fuzzy
msgid "Print test pages"
msgstr "Printas provpa�o(j)n..."

#: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321
#, fuzzy
msgid "Know how to use this printer"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323
#, fuzzy
msgid "Remove printer"
msgstr "Malproksima printilo"

#: ../../printer/printerdrake.pm_.c:3282
#, fuzzy, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../printer/printerdrake.pm_.c:3307
#, fuzzy
msgid "Default printer"
msgstr "Loka printilo"

#: ../../printer/printerdrake.pm_.c:3308
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3310
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3312
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3313
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3315
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3317
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3318
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3325
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../printer/printerdrake.pm_.c:3329
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"

#: ../../raid.pm_.c:137
msgid "mkraid failed"
msgstr "mkraid malsukcesis"

#: ../../raid.pm_.c:137
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid malsukcesis (eble raidtools mankas)"

#: ../../raid.pm_.c:153
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ne estas sufi�aj subdiskoj por RAID nivelo %d\n"

#: ../../security/main.pm_.c:36
msgid ""
"Standard: This is the standard security recommended for a computer that will "
"be used to connect\n"
"               to the Internet as a client.\n"
"\n"
"High:       There are already some restrictions, and more automatic checks "
"are run every night.\n"
"\n"
"Higher:    The security is now high enough to use the system as a server "
"which can accept\n"
"              connections from many clients. If your machine is only a "
"client on the Internet, you\n"
"\t      should choose a lower level.\n"
"\n"
"Paranoid:  This is similar to the previous level, but the system is entirely "
"closed and security\n"
"                features are at their maximum\n"
"\n"
"Security Administrator:\n"
"               If the 'Security Alerts' option is set, security alerts will "
"be sent to this user (username or\n"
"\t       email)"
msgstr ""

#: ../../security/main.pm_.c:66
#, fuzzy
msgid "Security Level:"
msgstr "Elektas sekurnivelon"

#: ../../security/main.pm_.c:77
#, fuzzy, c-format
msgid " (default value: %s)"
msgstr " (Defa�lta)"

#: ../../security/main.pm_.c:113
#, fuzzy
msgid "Security Alerts:"
msgstr "Elektas sekurnivelon"

#: ../../security/main.pm_.c:115
#, fuzzy
msgid "Security Administrator:"
msgstr "Malproksimaj lpd Printilaj Opcioj"

#: ../../security/main.pm_.c:128
#, fuzzy
msgid "Network Options"
msgstr "Modulaj opcioj:"

#: ../../security/main.pm_.c:128
#, fuzzy
msgid "System Options"
msgstr "Modulaj opcioj:"

#: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164
msgid ""
"The following options can be set to customize your\n"
"system security. If you need explanations, click on Help.\n"
msgstr ""

#: ../../security/main.pm_.c:177
msgid "Periodic Checks"
msgstr ""

#: ../../security/main.pm_.c:191
#, fuzzy
msgid "Please wait, setting security level..."
msgstr "Elektas sekurnivelon"

#: ../../security/main.pm_.c:197
#, fuzzy
msgid "Please wait, setting security options..."
msgstr "Preparas instaladon"

#: ../../services.pm_.c:19
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""

#: ../../services.pm_.c:20
msgid "Anacron a periodic command scheduler."
msgstr "Anacron, perioda ordonvicigilo."

#: ../../services.pm_.c:21
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd estas uzata por monitori la bateriostaton kaj registri �in en la\n"
"sistemlogdosiero (syslog).  Vi anka� povas uzi �in por halti la komputilon\n"
"kiam la baterio�argo estas malgranda."

#: ../../services.pm_.c:23
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Lan�as ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
"'at' estis uzata, kaj lan�as ba�ajn ordonojn kiam la �argmezo estas\n"
"sufi�e malgranda."

#: ../../services.pm_.c:25
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron estas norma Uniksa programo kiu lan�as programojn kiujn la uzulo\n"
"specifas je periodaj tempoj.  vixie cron aldonas kelkajn trajtojn al la\n"
"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
"konfiguraj opcioj."

#: ../../services.pm_.c:28
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM aldonas subtenon por musoj al teksta-re�imaj Linuksaj aplikoj ekzemple\n"
"la 'Midnight Commander' (Meznokta Estro).  Anka� �i permesas uzi la muson\n"
"por transpo�igi �e la konzolo (Sen X Fenestroj)."

#: ../../services.pm_.c:31
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: ../../services.pm_.c:33
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache estas Tut-Tera Teksa�a servilo.  �i liveras HTML-ajn dosierojn\n"
"kaj CGI (komunakluza interfaco)."

#: ../../services.pm_.c:34
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"La interreta superservila demono (kutime nomata inetd) lan�as sortimenton\n"
"da aliaj interretaj servoj la�bezone.  �i respondas por la lan�o de multaj\n"
"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin.  Se vi mal�altas inetd,\n"
"ve mal�altas �iujn el la servoj por kiuj �i respondas."

#: ../../services.pm_.c:38
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: ../../services.pm_.c:40
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"�i tiu paka�o �argas la elektitan klavarmapon la� /etc/sysconfig/keyboard.\n"
"Vi povas elekti �i tion per la kbdconfig utilprogramo.  Vi lasus �i tion\n"
"ebligatan por la plejmulto da sistemoj."

#: ../../services.pm_.c:43
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: ../../services.pm_.c:45
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: ../../services.pm_.c:46
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: ../../services.pm_.c:48
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd estas la printvica dajmono bezonata por lpr ta�ge funkcii.  �i estas\n"
"baze servilo kiu arbitracias printajn taskojn al printilo(j)."

#: ../../services.pm_.c:50
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: ../../services.pm_.c:52
#, fuzzy
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"'named' (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
"po�tejojn de IP adresoj."

#: ../../services.pm_.c:53
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Muntas kaj malmuntas �iujn RetDosierSistemajn (NFS), SMB (Lan\n"
"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."

#: ../../services.pm_.c:55
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"�altas/Mal�altas �iujn retajn interfacojn konfiguratajn por lan�i\n"
"dum sistemstartado."

#: ../../services.pm_.c:57
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
"�i tiu servo provizas NFS dosier�losado, kiun vi konfiguras per la\n"
"/etc/exports dosiero."

#: ../../services.pm_.c:60
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
"�i tiu servo provizas NFS dosier�losado."

#: ../../services.pm_.c:62
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: ../../services.pm_.c:64
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: ../../services.pm_.c:65
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA subteno kutime estas subteno de a�o kiel ethernet kaj modemoj en\n"
"tekkomputiloj.  �i ne estos lan�ata krom se vi konfiguras �i por ke �i\n"
"estu sendan�era �e komputiloj kiuj ne bezonas �in."

#: ../../services.pm_.c:68
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
"uzas.\n"
"La pordmapservilo devas esti uzata �e komputiloj kiuj agas kiel serviloj\n"
"por protokoloj kiuj uzas la RPC mekanismon."

#: ../../services.pm_.c:71
#, fuzzy
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"\"Postfix\" estas Po�tTransportPerilo, kiu estas la programo kiu movas\n"
"retpo�ton de unu komputilo al alia."

#: ../../services.pm_.c:72
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Savas kaj resta�ras sisteman entropikomuna�on por pli altkvalita\n"
"generado de aleatoraj nombroj."

#: ../../services.pm_.c:74
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""

#: ../../services.pm_.c:76
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"La routed dajmono permesas a�tomatan �isdatigon de la IP enkursigila tabelo\n"
"per la RIP protokolo.  Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."

#: ../../services.pm_.c:79
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
"pri la rapideco de iu ajn komputilo sur tiu reto."

#: ../../services.pm_.c:81
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
"konektataj �e aliaj respondantaj komputiloj."

#: ../../services.pm_.c:83
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"La rwho protokolo permesas al uzuloj havigi liston de �iuj el la uzuloj\n"
"konektataj �e komputilo kiu estas uzanta la rwho dajmono (simila al finger)."

#: ../../services.pm_.c:85
msgid "Launch the sound system on your machine"
msgstr ""

#: ../../services.pm_.c:86
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
"mesa�ojn al diversaj sistemlogdosieroj.  �i estas bona ideo �iam uzi\n"
"syslog."

#: ../../services.pm_.c:88
msgid "Load the drivers for your usb devices."
msgstr ""

#: ../../services.pm_.c:89
#, fuzzy
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
"Startas kaj �esigas la X Tiparan Servilon je starttempo kaj �esiga tempo."

#: ../../services.pm_.c:115 ../../services.pm_.c:157
msgid "Choose which services should be automatically started at boot time"
msgstr ""

#: ../../services.pm_.c:127
#, fuzzy
msgid "Printing"
msgstr "Printilo"

#: ../../services.pm_.c:128
msgid "Internet"
msgstr "Interreto"

#: ../../services.pm_.c:131
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709
#, fuzzy
msgid "System"
msgstr "Sistema modalo"

#: ../../services.pm_.c:138
#, fuzzy
msgid "Remote Administration"
msgstr "Malproksimaj lpd Printilaj Opcioj"

#: ../../services.pm_.c:146
#, fuzzy
msgid "Database Server"
msgstr "Datumbazoj"

#: ../../services.pm_.c:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:191
#, fuzzy
msgid "Services"
msgstr "Servilo"

#: ../../services.pm_.c:203
#, fuzzy
msgid "running"
msgstr "Averto"

#: ../../services.pm_.c:203
#, fuzzy
msgid "stopped"
msgstr "Alfiksu"

#: ../../services.pm_.c:217
msgid "Services and deamons"
msgstr ""

#: ../../services.pm_.c:222
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""

#: ../../services.pm_.c:229
#, fuzzy
msgid "On boot"
msgstr "Yaboot"

#: ../../services.pm_.c:241
#, fuzzy
msgid "Start"
msgstr "Stato:"

#: ../../services.pm_.c:241
#, fuzzy
msgid "Stop"
msgstr "Sektoro"

#: ../../share/advertising/01-thanks.pl_.c:9
msgid "Thank you for choosing Mandrake Linux 9.0"
msgstr ""

#: ../../share/advertising/01-thanks.pl_.c:10
msgid "Welcome to the Open Source world"
msgstr ""

#: ../../share/advertising/01-thanks.pl_.c:11
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""

#: ../../share/advertising/02-community.pl_.c:9
#, fuzzy
msgid "Get involved in the Free Software world"
msgstr "La cetero de la mondo"

#: ../../share/advertising/02-community.pl_.c:10
msgid "Want to know more about the Open Source community?"
msgstr ""

#: ../../share/advertising/02-community.pl_.c:11
msgid ""
"To share your own knowledge and help build Linux tools, join the discussion "
"forums you'll find on our \"Community\" webpages"
msgstr ""

#: ../../share/advertising/03-internet.pl_.c:9
#, fuzzy
msgid "Get the most from the Internet"
msgstr "Konektu al la Interreto"

#: ../../share/advertising/03-internet.pl_.c:10
msgid ""
"Mandrake Linux 9.0 has selected the best software for you. Surf the Web and "
"view animations with Mozilla and Konqueror, or read your mail and handle "
"your personal information with Evolution and Kmail"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:9
msgid "Discover the most up-to-date graphical and multimedia tools!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:10
msgid "Push multimedia to its limits!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:11
msgid ""
"Mandrake Linux 9.0 enables you to use the very latest software to play audio "
"files, edit and handle your images or photos, and play videos"
msgstr ""

#: ../../share/advertising/05-games.pl_.c:9
msgid "Games"
msgstr "Ludoj"

#: ../../share/advertising/05-games.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides the best Open Source games - arcade, action, "
"strategy, ..."
msgstr ""

#: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49
#, fuzzy
msgid "Mandrake Control Center"
msgstr "Konekti al la interreto"

#: ../../share/advertising/06-mcc.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides a powerful tool to fully customize and configure "
"your machine"
msgstr ""

#: ../../share/advertising/07-desktop.pl_.c:9
#, fuzzy
msgid "User interfaces"
msgstr "Reta interfaco"

#: ../../share/advertising/07-desktop.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully "
"modified: KDE 3, Gnome 2, WindowMaker, ..."
msgstr ""

#: ../../share/advertising/08-development.pl_.c:9
#, fuzzy
msgid "Development simplified"
msgstr "Programisto"

#: ../../share/advertising/08-development.pl_.c:10
msgid "Mandrake Linux 9.0 is the ultimate development platform"
msgstr ""

#: ../../share/advertising/08-development.pl_.c:11
msgid ""
"Use the full power of the GNU gcc 3 compiler as well as the best Open Source "
"development environments"
msgstr ""

#: ../../share/advertising/09-server.pl_.c:9
msgid "Turn your machine into a reliable server"
msgstr ""

#: ../../share/advertising/09-server.pl_.c:10
msgid ""
"Transform your machine into a powerful Linux server with a few clicks of "
"your mouse: Web server, mail, firewall, router, file and print server, ..."
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:9
msgid "Optimize your security"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:10
msgid ""
"The MandrakeSecurity range includes the Multi Network Firewall product (M.N."
"F.)"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:11
msgid ""
"This firewall product includes network features that allow you to fulfill "
"all your security needs"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:12
msgid "This product is available on MandrakeStore website"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:9
msgid "The official MandrakeSoft store"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:10
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies,\" are available online on our e-store:"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl_.c:9
msgid "Strategic partners"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl_.c:10
msgid ""
"MandrakeSoft works alongside a selection of companies offering professional "
"solutions compatible with Mandrake Linux. A list of these partners is "
"available on the MandrakeStore"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:9
msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:10
msgid ""
"The training program has been created to respond to the needs of both end "
"users and experts (Network and System administrators)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:11
msgid "Certify yourself on Linux"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:12
msgid ""
"Whether you choose to teach yourself online or via our network of training "
"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI "
"certification program (worldwide professional technical certification)"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:9
#, fuzzy
msgid "Become a MandrakeExpert"
msgstr "Spertulo"

#: ../../share/advertising/14-mdkexpert.pl_.c:10
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:11
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9
#, fuzzy
msgid "MandrakeExpert Corporate"
msgstr "Spertulo"

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10
msgid "An online platform to respond to company's specific support needs"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:9
msgid "Discover MandrakeClub and Mandrake Corporate Club"
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:10
msgid ""
"MandrakeClub and Mandrake Corporate Club were created for business and "
"private users of Mandrake Linux who would like to directly support their "
"favorite Linux distribution while also receiving special privileges. If you "
"enjoy our products, if your company benefits from our products to gain a "
"competititve edge, if you want to support Mandrake Linux development, join "
"MandrakeClub!"
msgstr ""

#: ../../standalone.pm_.c:21
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: ../../standalone.pm_.c:40
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version name.\n"
msgstr ""

#: ../../standalone.pm_.c:51
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""

#: ../../standalone.pm_.c:57
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: ../../standalone.pm_.c:68
msgid ""
"[OPTIONS]...\n"
"\t      --debug         print debugging information"
msgstr ""

#: ../../standalone.pm_.c:70
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: ../../standalone.pm_.c:82
#, fuzzy
msgid "[keyboard]"
msgstr "Klavaro"

#: ../../standalone.pm_.c:83
msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: ../../standalone.pm_.c:84
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""

#: ../../standalone.pm_.c:93
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: ../../standalone.pm_.c:94
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: ../../standalone.pm_.c:99
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] "
"[--dynamic=dev]"
msgstr ""

#: ../../standalone.pm_.c:100
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: ../../standalone.pm_.c:114
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: ../../standalone.pm_.c:168
#, fuzzy
msgid "Installing packages..."
msgstr "Instalanta paka�o %s"

#: ../../standalone/XFdrake_.c:138
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""
"Bonvole adia�u kaj sekve uzu Kontrol-Alt-Retropa�o (Ctrl-Alt-Backspace)."

#: ../../standalone/XFdrake_.c:142
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Bonvolu resaluti en %s-n por aktivigi la �an�ojn."

#: ../../standalone/drakTermServ_.c:239
#, fuzzy
msgid "Mandrake Terminal Server Configuration"
msgstr "Interreta Konfigurado"

#: ../../standalone/drakTermServ_.c:253
#, fuzzy
msgid "Enable Server"
msgstr "Datumbazoj"

#: ../../standalone/drakTermServ_.c:260
#, fuzzy
msgid "Disable Server"
msgstr "Datumbazoj"

#: ../../standalone/drakTermServ_.c:268
#, fuzzy
msgid "Start Server"
msgstr "NIS Servilo"

#: ../../standalone/drakTermServ_.c:275
#, fuzzy
msgid "Stop Server"
msgstr "NIS Servilo"

#: ../../standalone/drakTermServ_.c:283
msgid "Etherboot Floppy/ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:288
msgid "Net Boot Images"
msgstr ""

#: ../../standalone/drakTermServ_.c:294
#, fuzzy
msgid "Add/Del Users"
msgstr "Aldonu uzanto"

#: ../../standalone/drakTermServ_.c:299
msgid "Add/Del Clients"
msgstr ""

#: ../../standalone/drakTermServ_.c:328
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:332
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:365
msgid ""
"drakTermServ Overview\n"
"\t\t\t   \n"
"        - Create Etherboot Enabled Boot Images:\n"
"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
"must be created.\n"
"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical interface\n"
"        \t\tto help manage/customize these images.\n"
"\n"
"        - Maintain /etc/dhcpd.conf:\n"
"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP address\n"
"        \t\tand net boot images to the machine. drakTermServ helps create/"
"remove these entries.\n"
"\t\t\t\n"
"        \t\t(PCI cards may omit the image - etherboot will request the "
"correct image. You should\n"
"        \t\talso consider that when etherboot looks for the images, it "
"expects names like\n"
"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
"like:\n"
"        \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address              192.168.192.3;\n"
"\t\t\t\t\t/*type                          fat;*/\n"
"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
"entry for\n"
"\t\t\ta client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"\t\t\tNote: The \"/*type\" entry is only used by drakTermServ.  Clients can "
"either be \"thin\"*/\n"
"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run most\n"
"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
"$IP=client_ip\\$\\$ is\n"
"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are modified\n"
"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
"issues in using xdmcp,\n"
"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
"subnet.\n"
"\t\t\t\n"
"\t\t\tNote: You must stop/start the server after adding or changing "
"clients.\n"
"\t\t\t\n"
"        - Maintain /etc/exports:\n"
"        \t\tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \t\tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \t\tdiskless clients.\n"
"\n"
"        \t\tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t\t/                  (ro,all_squash)\n"
"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tWith SUBNET/MASK being defined for your network.\n"
"        \t\t\n"
"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
"        \t\tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
"\\$. drakTermServ helps\n"
"        \t\tin this respect by adding or removing system users from this "
"file.\n"
"\n"
"        - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future drakTermServ "
"will help create these\n"
"        \t\tfiles.\n"
"\n"
"        - Per client system configuration files:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future, "
"drakTermServ can help create files\n"
"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
"keyboard on a per-client\n"
"        \t\tbasis.\n"
"\n"
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ will configure this file to work in conjunction "
"with the images created by\n"
"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to each\n"
"        \t\tdiskless client.\n"
"\n"
"        \t\tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \t\tservice tftp\n"
"        \t\t(\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t\t}\n"
"        \t\t\n"
"        \t\tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \t\tputs it's images.\n"
"\n"
"        - Create etherboot floppies/CDs:\n"
"        \t\tThe diskless client machines need either ROM images on the NIC, "
"or a boot floppy\n"
"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
"generate these images,\n"
"        \t\tbased on the NIC in the client machine.\n"
"        \t\t\n"
"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \t\tcat /usr/lib/etherboot/boot1a.bin /\\n        \t\t\t/usr/lib/"
"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:488
msgid "Boot Floppy"
msgstr ""

#: ../../standalone/drakTermServ_.c:490
msgid "Boot ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:559
msgid "Build Whole Kernel -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591
msgid "This will take a few minutes."
msgstr ""

#: ../../standalone/drakTermServ_.c:573
msgid "No kernel selected!"
msgstr ""

#: ../../standalone/drakTermServ_.c:576
msgid "Build Single NIC -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:587
#, fuzzy
msgid "No nic selected!"
msgstr "Ne konektita"

#: ../../standalone/drakTermServ_.c:590
msgid "Build All Kernels -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:604
#, fuzzy
msgid "<-- Delete"
msgstr "Forigu"

#: ../../standalone/drakTermServ_.c:611
#, fuzzy
msgid "Delete All NBIs"
msgstr "Elektu dosieron"

#: ../../standalone/drakTermServ_.c:668
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: ../../standalone/drakTermServ_.c:673
#, fuzzy
msgid "Add User -->"
msgstr "Aldonu uzanto"

#: ../../standalone/drakTermServ_.c:681
msgid "<-- Del User"
msgstr ""

#: ../../standalone/drakTermServ_.c:720
#, fuzzy, c-format
msgid "type: %s"
msgstr "Speco: "

#: ../../standalone/drakTermServ_.c:753
msgid "No net boot images created!"
msgstr ""

#: ../../standalone/drakTermServ_.c:773
msgid "Thin Client"
msgstr ""

#: ../../standalone/drakTermServ_.c:775
msgid "Allow Thin Clients"
msgstr ""

#: ../../standalone/drakTermServ_.c:778
msgid "Add Client -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:821
msgid "<-- Edit Client"
msgstr ""

#: ../../standalone/drakTermServ_.c:837
#, fuzzy
msgid "Delete Client"
msgstr "Forigu"

#: ../../standalone/drakTermServ_.c:843
#, fuzzy
msgid "dhcpd Config..."
msgstr "Mi konfiguras..."

#: ../../standalone/drakTermServ_.c:876
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: ../../standalone/drakTermServ_.c:894
msgid "Subnet:"
msgstr ""

#: ../../standalone/drakTermServ_.c:901
#, fuzzy
msgid "Netmask:"
msgstr "Retmasko"

#: ../../standalone/drakTermServ_.c:908
msgid "Routers:"
msgstr ""

#: ../../standalone/drakTermServ_.c:915
msgid "Subnet Mask:"
msgstr ""

#: ../../standalone/drakTermServ_.c:922
msgid "Broadcast Address:"
msgstr ""

#: ../../standalone/drakTermServ_.c:929
#, fuzzy
msgid "Domain Name:"
msgstr "Domajna nomo"

#: ../../standalone/drakTermServ_.c:937
#, fuzzy
msgid "Name Servers:"
msgstr "NIS Servilo"

#: ../../standalone/drakTermServ_.c:948
msgid "IP Range Start:"
msgstr ""

#: ../../standalone/drakTermServ_.c:949
msgid "IP Range End:"
msgstr ""

#: ../../standalone/drakTermServ_.c:1001
#, fuzzy
msgid "dhcpd Server Configuration"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakTermServ_.c:1002
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: ../../standalone/drakTermServ_.c:1005
msgid "Dynamic IP Address Pool:"
msgstr ""

#: ../../standalone/drakTermServ_.c:1018
#, fuzzy
msgid "Write Config"
msgstr "rekonfiguru"

#: ../../standalone/drakTermServ_.c:1120
#, fuzzy
msgid "Please insert floppy disk:"
msgstr "En�ovu disketon en drajvo %s"

#: ../../standalone/drakTermServ_.c:1124
msgid "Couldn't access the floppy!"
msgstr ""

#: ../../standalone/drakTermServ_.c:1126
msgid "Floppy can be removed now"
msgstr ""

#: ../../standalone/drakTermServ_.c:1129
#, fuzzy
msgid "No floppy drive available!"
msgstr "Neniu disketilo havebla"

#: ../../standalone/drakTermServ_.c:1138
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: ../../standalone/drakTermServ_.c:1140
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: ../../standalone/drakTermServ_.c:1159
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: ../../standalone/drakTermServ_.c:1451
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: ../../standalone/drakautoinst_.c:40
#, fuzzy
msgid "Error!"
msgstr "Eraro"

#: ../../standalone/drakautoinst_.c:41
#, c-format
msgid "I can't find needed image file `%s'."
msgstr ""

#: ../../standalone/drakautoinst_.c:43
#, fuzzy
msgid "Auto Install Configurator"
msgstr "Post-instala konfigurado"

#: ../../standalone/drakautoinst_.c:44
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71
msgid "manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:62
#, fuzzy
msgid "replay"
msgstr "Reludu"

#: ../../standalone/drakautoinst_.c:66
#, fuzzy
msgid "Automatic Steps Configuration"
msgstr "Post-instala konfigurado"

#: ../../standalone/drakautoinst_.c:67
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79
#, fuzzy
msgid "Creating auto install floppy"
msgstr "Kreas a�toinstalan disketon"

#: ../../standalone/drakautoinst_.c:139
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504
#: ../../standalone/scannerdrake_.c:117
msgid "Congratulations!"
msgstr "Gratulojn!"

#: ../../standalone/drakautoinst_.c:235
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""

#: ../../standalone/drakautoinst_.c:273
#, fuzzy
msgid "Auto Install"
msgstr "Instalu"

#: ../../standalone/drakautoinst_.c:343
#, fuzzy
msgid "Add an item"
msgstr "Aldonu uzulon"

#: ../../standalone/drakautoinst_.c:350
#, fuzzy
msgid "Remove the last item"
msgstr "Formatas retrokonektan dosieron %s"

#: ../../standalone/drakbackup_.c:580
msgid "Cron not available yet as non-root"
msgstr ""

#: ../../standalone/drakbackup_.c:690
msgid "WARNING"
msgstr ""

#: ../../standalone/drakbackup_.c:691
#, fuzzy
msgid "FATAL"
msgstr "Dosierlokigtabelo (FAT)"

#: ../../standalone/drakbackup_.c:692
msgid "INFO"
msgstr ""

#: ../../standalone/drakbackup_.c:704
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:705
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:709
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803
#: ../../standalone/drakbackup_.c:859
#, fuzzy
msgid "Total progess"
msgstr "Provu pordojn"

#: ../../standalone/drakbackup_.c:785
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: ../../standalone/drakbackup_.c:794
msgid "This may take a moment to generate the keys."
msgstr ""

#: ../../standalone/drakbackup_.c:801
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr ""

#: ../../standalone/drakbackup_.c:818
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: ../../standalone/drakbackup_.c:819
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "Neniu pasvorto"

#: ../../standalone/drakbackup_.c:820
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: ../../standalone/drakbackup_.c:821
#, fuzzy, c-format
msgid "Can't find %s on %s"
msgstr "Ne povis malfermi %s por skribi: %s\n"

#: ../../standalone/drakbackup_.c:824
#, c-format
msgid "%s not responding"
msgstr ""

#: ../../standalone/drakbackup_.c:828
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: ../../standalone/drakbackup_.c:873
msgid "WebDAV remote site already in sync!"
msgstr ""

#: ../../standalone/drakbackup_.c:877
msgid "WebDAV transfer failed!"
msgstr ""

#: ../../standalone/drakbackup_.c:898
msgid "No CDR/DVDR in drive!"
msgstr ""

#: ../../standalone/drakbackup_.c:902
msgid "Does not appear to be recordable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:906
msgid "Not erasable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:945
msgid "This may take a moment to erase the media."
msgstr ""

#: ../../standalone/drakbackup_.c:1033
msgid "Permission problem accessing CD."
msgstr ""

#: ../../standalone/drakbackup_.c:1060
#, c-format
msgid "No tape in %s!"
msgstr ""

#: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223
msgid "Backup system files..."
msgstr ""

#: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291
#, fuzzy
msgid "Hard Disk Backup files..."
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1236
#, fuzzy
msgid "Backup User files..."
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1237
msgid "Hard Disk Backup Progress..."
msgstr ""

#: ../../standalone/drakbackup_.c:1290
#, fuzzy
msgid "Backup Other files..."
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1296
#, fuzzy
msgid "No changes to backup!"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1319
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""

#: ../../standalone/drakbackup_.c:1322
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1340
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1345
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1354
#, fuzzy
msgid " Error during mail sending. \n"
msgstr "Eraro legante dosiero %s"

#: ../../standalone/drakbackup_.c:1380
msgid "Can't create catalog!"
msgstr ""

#: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501
#: ../../standalone/drakfont_.c:946
#, fuzzy
msgid "File Selection"
msgstr "Elektado de Paka�oj"

#: ../../standalone/drakbackup_.c:1529
msgid "Select the files or directories and click on 'Add'"
msgstr ""

#: ../../standalone/drakbackup_.c:1573
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1574
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1575
#, fuzzy
msgid "Backup your System files. (/etc directory)"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1576
msgid "Use incremental backup  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:1577
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: ../../standalone/drakbackup_.c:1578
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""

#: ../../standalone/drakbackup_.c:1595
#, fuzzy
msgid "Please check all users that you want to include in your backup."
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:1622
msgid "Do not include the browser cache"
msgstr ""

#: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000
#, fuzzy
msgid "Remove Selected"
msgstr "Malinstalu printvicon"

#: ../../standalone/drakbackup_.c:1679
#, fuzzy
msgid "Windows (FAT32)"
msgstr "Forigu Vindozon"

#: ../../standalone/drakbackup_.c:1714
#, fuzzy
msgid "Users"
msgstr "Salutnomo"

#: ../../standalone/drakbackup_.c:1740
#, fuzzy
msgid "Use network connection to backup"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:1742
msgid "Net Method:"
msgstr ""

#: ../../standalone/drakbackup_.c:1746
msgid "Use Expect for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1747
msgid ""
"Create/Transfer\n"
"backup keys for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1748
msgid ""
"  Transfer  \n"
"Now"
msgstr ""

#: ../../standalone/drakbackup_.c:1749
msgid ""
"Other (not drakbackup)\n"
"keys in place already"
msgstr ""

#: ../../standalone/drakbackup_.c:1753
#, fuzzy
msgid "Please enter the host name or IP."
msgstr "Bonvole, provu la muson"

#: ../../standalone/drakbackup_.c:1758
msgid ""
"Please enter the directory (or module) to\n"
" put the backup on this host."
msgstr ""

#: ../../standalone/drakbackup_.c:1763
#, fuzzy
msgid "Please enter your login"
msgstr "Bonvole provu denove"

#: ../../standalone/drakbackup_.c:1768
#, fuzzy
msgid "Please enter your password"
msgstr "Bonvole provu denove"

#: ../../standalone/drakbackup_.c:1774
#, fuzzy
msgid "Remember this password"
msgstr "Neniu pasvorto"

#: ../../standalone/drakbackup_.c:1785
msgid "Need hostname, username and password!"
msgstr ""

#: ../../standalone/drakbackup_.c:1879
msgid "Use CD/DVDROM to backup"
msgstr ""

#: ../../standalone/drakbackup_.c:1882
msgid ""
"Please choose your CD/DVD device\n"
"(Press Enter to propogate settings to other fields.\n"
"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""

#: ../../standalone/drakbackup_.c:1887
#, fuzzy
msgid "Please choose your CD/DVD media size (Mb)"
msgstr "Bonvole, elektu vian klavaran aran�on."

#: ../../standalone/drakbackup_.c:1893
#, fuzzy
msgid "Please check for multisession CD"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../standalone/drakbackup_.c:1899
#, fuzzy
msgid "Please check if you are using CDRW media"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../standalone/drakbackup_.c:1905
#, fuzzy
msgid "Please check if you want to erase your RW media (1st Session)"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../standalone/drakbackup_.c:1906
msgid " Erase Now "
msgstr ""

#: ../../standalone/drakbackup_.c:1912
#, fuzzy
msgid "Please check if you are using a DVDR device"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../standalone/drakbackup_.c:1918
#, fuzzy
msgid "Please check if you are using a DVDRAM device"
msgstr "Bonvolu klaki sur subdiskon"

#: ../../standalone/drakbackup_.c:1931
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""

#: ../../standalone/drakbackup_.c:1964
#, fuzzy
msgid "No CD device defined!"
msgstr "Elektu dosieron"

#: ../../standalone/drakbackup_.c:2012
#, fuzzy
msgid "Use tape to backup"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:2015
msgid "Please enter the device name to use for backup"
msgstr ""

#: ../../standalone/drakbackup_.c:2021
#, fuzzy
msgid "Please check if you want to use the non-rewinding device."
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2027
#, fuzzy
msgid "Please check if you want to erase your tape before the backup."
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2033
#, fuzzy
msgid "Please check if you want to eject your tape after the backup."
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112
#: ../../standalone/drakbackup_.c:3068
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""

#: ../../standalone/drakbackup_.c:2103
#, fuzzy
msgid "Please enter the directory to save to:"
msgstr "Bonvole, provu la muson"

#: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074
#, fuzzy
msgid "Use quota for backup files."
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:2180
#, fuzzy
msgid "Network"
msgstr "Reta interfaco"

#: ../../standalone/drakbackup_.c:2185
msgid "CDROM / DVDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:2190
msgid "HardDrive / NFS"
msgstr ""

#: ../../standalone/drakbackup_.c:2195
#, fuzzy
msgid "Tape"
msgstr "Tipo"

#: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212
#: ../../standalone/drakbackup_.c:2216
msgid "hourly"
msgstr ""

#: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213
#: ../../standalone/drakbackup_.c:2216
msgid "daily"
msgstr ""

#: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214
#: ../../standalone/drakbackup_.c:2216
msgid "weekly"
msgstr ""

#: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215
#: ../../standalone/drakbackup_.c:2216
msgid "monthly"
msgstr ""

#: ../../standalone/drakbackup_.c:2229
#, fuzzy
msgid "Use daemon"
msgstr "Salutnomo"

#: ../../standalone/drakbackup_.c:2234
#, fuzzy
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2240
#, fuzzy
msgid ""
"Please choose the\n"
"media for backup."
msgstr "Bonvole, elektu lingvon por uzi."

#: ../../standalone/drakbackup_.c:2247
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' medias also use the hard drive."
msgstr ""

#: ../../standalone/drakbackup_.c:2283
msgid "Send mail report after each backup to:"
msgstr ""

#: ../../standalone/drakbackup_.c:2289
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: ../../standalone/drakbackup_.c:2324
msgid "What"
msgstr ""

#: ../../standalone/drakbackup_.c:2329
#, fuzzy
msgid "Where"
msgstr "Rado"

#: ../../standalone/drakbackup_.c:2334
#, fuzzy
msgid "When"
msgstr "Rado"

#: ../../standalone/drakbackup_.c:2339
#, fuzzy
msgid "More Options"
msgstr "Modulaj opcioj:"

#: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444
#, fuzzy
msgid "Drakbackup Configuration"
msgstr "Reta Konfigura�o"

#: ../../standalone/drakbackup_.c:2376
#, fuzzy
msgid "Please choose where you want to backup"
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2378
msgid "on Hard Drive"
msgstr ""

#: ../../standalone/drakbackup_.c:2388
msgid "across Network"
msgstr ""

#: ../../standalone/drakbackup_.c:2398
msgid "on CDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:2406
msgid "on Tape Device"
msgstr ""

#: ../../standalone/drakbackup_.c:2449
#, fuzzy
msgid "Please choose what you want to backup"
msgstr "Bonvole, elektu la paka�ojn kiujn vi deziras instali."

#: ../../standalone/drakbackup_.c:2450
#, fuzzy
msgid "Backup system"
msgstr "Dosiersistemo konfiguro"

#: ../../standalone/drakbackup_.c:2451
msgid "Backup Users"
msgstr ""

#: ../../standalone/drakbackup_.c:2454
msgid "Select user manually"
msgstr ""

#: ../../standalone/drakbackup_.c:2537
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2538
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2540
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2542
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2544
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2547
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2553
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: ../../standalone/drakbackup_.c:2554
msgid "RW"
msgstr ""

#: ../../standalone/drakbackup_.c:2555
#, fuzzy, c-format
msgid " on device: %s"
msgstr "Musaparato: %s\n"

#: ../../standalone/drakbackup_.c:2556
msgid " (multi-session)"
msgstr ""

#: ../../standalone/drakbackup_.c:2557
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: ../../standalone/drakbackup_.c:2558
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: ../../standalone/drakbackup_.c:2561
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2562
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2563
#, fuzzy
msgid ""
"\n"
"- Options:\n"
msgstr "Opcioj"

#: ../../standalone/drakbackup_.c:2564
msgid "\tDo not include System Files\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2567
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2569
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2572
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2573
msgid "\t-Hard drive.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2574
msgid "\t-CDROM.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2575
msgid "\t-Tape \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2576
msgid "\t-Network by FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2577
msgid "\t-Network by SSH.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2578
msgid "\t-Network by rsync.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2579
msgid "\t-Network by webdav.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2581
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2587
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2754
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2756
#, fuzzy
msgid "Please uncheck or remove it on next time."
msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"

#: ../../standalone/drakbackup_.c:2766
msgid "Backup files are corrupted"
msgstr ""

#: ../../standalone/drakbackup_.c:2787
msgid "          All of your selected data have been          "
msgstr ""

#: ../../standalone/drakbackup_.c:2788
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr ""

#: ../../standalone/drakbackup_.c:2906
#, fuzzy
msgid "         Restore Configuration       "
msgstr "Reta Konfigura�o"

#: ../../standalone/drakbackup_.c:2924
msgid "OK to restore the other files."
msgstr ""

#: ../../standalone/drakbackup_.c:2941
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: ../../standalone/drakbackup_.c:3019
#, fuzzy
msgid "Backup the system files before:"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:3021
#, fuzzy
msgid "please choose the date to restore"
msgstr "Bonvole, elektu la specon de via muso."

#: ../../standalone/drakbackup_.c:3057
#, fuzzy
msgid "Use Hard Disk to backup"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:3060
#, fuzzy
msgid "Please enter the directory to save:"
msgstr "Bonvole, provu la muson"

#: ../../standalone/drakbackup_.c:3103
#, fuzzy
msgid "FTP Connection"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakbackup_.c:3110
#, fuzzy
msgid "Secure Connection"
msgstr "Elektu Printilan Konekton"

#: ../../standalone/drakbackup_.c:3134
#, fuzzy
msgid "Restore from Hard Disk."
msgstr "Resta�ru de disketo"

#: ../../standalone/drakbackup_.c:3136
msgid "Please enter the directory where backups are stored"
msgstr ""

#: ../../standalone/drakbackup_.c:3204
#, fuzzy
msgid "Select another media to restore from"
msgstr "Bonvole, elektu la specon de via muso."

#: ../../standalone/drakbackup_.c:3206
#, fuzzy
msgid "Other Media"
msgstr "Alia"

#: ../../standalone/drakbackup_.c:3211
#, fuzzy
msgid "Restore system"
msgstr "Instalu sistemon"

#: ../../standalone/drakbackup_.c:3212
#, fuzzy
msgid "Restore Users"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3213
#, fuzzy
msgid "Restore Other"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3215
#, fuzzy
msgid "select path to restore (instead of /)"
msgstr "Bonvole, elektu la specon de via muso."

#: ../../standalone/drakbackup_.c:3219
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: ../../standalone/drakbackup_.c:3221
msgid "Remove user directories before restore."
msgstr ""

#: ../../standalone/drakbackup_.c:3334
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: ../../standalone/drakbackup_.c:3344
#, fuzzy
msgid ""
"Restore Selected\n"
"Files"
msgstr "Malinstalu printvicon"

#: ../../standalone/drakbackup_.c:3361
#, fuzzy
msgid ""
"Change\n"
"Restore Path"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3427
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3440
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: ../../standalone/drakbackup_.c:3440
#, fuzzy
msgid "Restore From CD"
msgstr "Resta�ru de disketo"

#: ../../standalone/drakbackup_.c:3442
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3452
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: ../../standalone/drakbackup_.c:3452
#, fuzzy
msgid "Restore From Tape"
msgstr "Sava subdiskotabelo"

#: ../../standalone/drakbackup_.c:3454
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3474
#, fuzzy
msgid "Restore Via Network"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3474
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: ../../standalone/drakbackup_.c:3475
#, fuzzy
msgid "Host Name"
msgstr "Po�tejo"

#: ../../standalone/drakbackup_.c:3476
msgid "Host Path or Module"
msgstr ""

#: ../../standalone/drakbackup_.c:3483
#, fuzzy
msgid "Password required"
msgstr "Pasvorto"

#: ../../standalone/drakbackup_.c:3489
#, fuzzy
msgid "Username required"
msgstr "Salutnomo"

#: ../../standalone/drakbackup_.c:3492
#, fuzzy
msgid "Hostname required"
msgstr "Po�tejo: "

#: ../../standalone/drakbackup_.c:3497
msgid "Path or Module required"
msgstr ""

#: ../../standalone/drakbackup_.c:3510
msgid "Files Restored..."
msgstr ""

#: ../../standalone/drakbackup_.c:3513
#, fuzzy
msgid "Restore Failed..."
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3751
msgid "Restore all backups"
msgstr ""

#: ../../standalone/drakbackup_.c:3760
#, fuzzy
msgid "Custom Restore"
msgstr "Akomodata"

#: ../../standalone/drakbackup_.c:3804
msgid "CD in place - continue."
msgstr ""

#: ../../standalone/drakbackup_.c:3810
msgid "Browse to new restore repository."
msgstr ""

#: ../../standalone/drakbackup_.c:3813
#, fuzzy
msgid "Restore From Catalog"
msgstr "Sava subdiskotabelo"

#: ../../standalone/drakbackup_.c:3841
#, fuzzy
msgid "Restore Progress"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916
#: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969
#: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056
#: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113
#: ../../standalone/drakbackup_.c:4139
#, fuzzy
msgid "Previous"
msgstr "<- Anta�a"

#: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973
#: ../../standalone/logdrake_.c:203
#, fuzzy
msgid "Save"
msgstr "Stato:"

#: ../../standalone/drakbackup_.c:3946
#, fuzzy
msgid "Build Backup"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544
#, fuzzy
msgid "Restore"
msgstr "Resta�ru de dosiero"

#: ../../standalone/drakbackup_.c:4189
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""

#: ../../standalone/drakbackup_.c:4195
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""

#: ../../standalone/drakbackup_.c:4209
#, fuzzy
msgid ""
"The following packages need to be installed:\n"
" @list_of_rpm_to_install"
msgstr "La sekvaj paka�oj estos instalataj"

#: ../../standalone/drakbackup_.c:4232
#, fuzzy
msgid "Please select data to restore..."
msgstr "Bonvole, elektu lingvon por uzi."

#: ../../standalone/drakbackup_.c:4267
#, fuzzy
msgid "Please select media for backup..."
msgstr "Bonvole, elektu lingvon por uzi."

#: ../../standalone/drakbackup_.c:4275
#, fuzzy
msgid "Please select data to backup..."
msgstr "Bonvole, elektu lingvon por uzi."

#: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: ../../standalone/drakbackup_.c:4308
msgid "Under Devel ... please wait."
msgstr ""

#: ../../standalone/drakbackup_.c:4382
#, fuzzy
msgid "Backup system files"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:4384
#, fuzzy
msgid "Backup user files"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:4386
#, fuzzy
msgid "Backup other files"
msgstr "Malbona rezerva dosiero"

#: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421
msgid "Total Progress"
msgstr ""

#: ../../standalone/drakbackup_.c:4412
msgid "files sending by FTP"
msgstr ""

#: ../../standalone/drakbackup_.c:4416
#, fuzzy
msgid "Sending files..."
msgstr "Konservu en dosiero"

#: ../../standalone/drakbackup_.c:4500
#, fuzzy
msgid "Backup Now from configuration file"
msgstr "Reta Konfigura�o"

#: ../../standalone/drakbackup_.c:4505
#, fuzzy
msgid "View Backup Configuration."
msgstr "Reta Konfigura�o"

#: ../../standalone/drakbackup_.c:4526
#, fuzzy
msgid "Wizard Configuration"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakbackup_.c:4531
#, fuzzy
msgid "Advanced Configuration"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakbackup_.c:4536
#, fuzzy
msgid "Backup Now"
msgstr "Dosiersistemo konfiguro"

#: ../../standalone/drakbackup_.c:4576
msgid "Drakbackup"
msgstr ""

#: ../../standalone/drakbackup_.c:4624
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time (about 1000% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         /*> cat .backupignore*/\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4654
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4662
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4701
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
"\n"
"So if you don't want to restore a user please unselect all their\n"
"check boxes.\n"
"\n"
"Otherwise, you are able to select only one of these.\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption to use. This option allows you to \n"
"\tbackup all of your data the first time, and \n"
"\tonly the changed data after.\n"
"\tSo you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4727
msgid ""
" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
"fr>"
msgstr ""

#: ../../standalone/drakbackup_.c:4729
msgid ""
" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""

#: ../../standalone/drakbackup_.c:4732
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4769
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4778
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""

#: ../../standalone/drakboot_.c:50
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "Instalado de %s malsukcesis.  La sekvanta eraro okazis:"

#: ../../standalone/drakbug_.c:45
msgid "Mandrake Bug Report Tool"
msgstr ""

#: ../../standalone/drakbug_.c:50
msgid "First Time Wizard"
msgstr ""

#: ../../standalone/drakbug_.c:51
msgid "Synchronization tool"
msgstr ""

#: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66
#: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135
#: ../../standalone/drakbug_.c:139
msgid "Standalone Tools"
msgstr ""

#: ../../standalone/drakbug_.c:53
msgid "HardDrake"
msgstr ""

#: ../../standalone/drakbug_.c:54
#, fuzzy
msgid "Mandrake Online"
msgstr "Konekti al la interreto"

#: ../../standalone/drakbug_.c:55
#, fuzzy
msgid "Menudrake"
msgstr "Spertulo"

#: ../../standalone/drakbug_.c:56
#, fuzzy
msgid "Msec"
msgstr "Muso"

#: ../../standalone/drakbug_.c:57
#, fuzzy
msgid "Remote Control"
msgstr "Malproksima printilo"

#: ../../standalone/drakbug_.c:58
#, fuzzy
msgid "Software Manager"
msgstr "Opuza nomo"

#: ../../standalone/drakbug_.c:59
msgid "Urpmi"
msgstr ""

#: ../../standalone/drakbug_.c:60
msgid "Windows Migration tool"
msgstr ""

#: ../../standalone/drakbug_.c:61
#, fuzzy
msgid "Userdrake"
msgstr "Printilo"

#: ../../standalone/drakbug_.c:62
#, fuzzy
msgid "Configuration Wizards"
msgstr "ISDN-a Konfigura�on"

#: ../../standalone/drakbug_.c:75
#, fuzzy
msgid "Application:"
msgstr "A�tentikigado"

#: ../../standalone/drakbug_.c:76
#, fuzzy
msgid "Package: "
msgstr "Elektado de Paka�oj"

#: ../../standalone/drakbug_.c:77
msgid "Kernel:"
msgstr ""

#: ../../standalone/drakbug_.c:78
#, fuzzy
msgid "Release: "
msgstr "Bonvole atendu"

#: ../../standalone/drakbug_.c:93
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""

#: ../../standalone/drakbug_.c:112
#, fuzzy
msgid "Report"
msgstr "porto"

#: ../../standalone/drakbug_.c:148
#, fuzzy
msgid "Not installed"
msgstr "Eliru instalprogramon"

#: ../../standalone/drakbug_.c:160
#, fuzzy
msgid "Package not installed"
msgstr "Eliru instalprogramon"

#: ../../standalone/drakbug_.c:173
msgid "connecting to Bugzilla wizard ..."
msgstr ""

#: ../../standalone/drakbug_.c:180
#, fuzzy
msgid "No browser available! Please install one"
msgstr ""
"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malanta� la instalado"

#: ../../standalone/drakconnect_.c:75
#, fuzzy, c-format
msgid "Network configuration (%d adapters)"
msgstr "ISDN-a Konfigura�on"

#: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591
#, fuzzy
msgid "Profile: "
msgstr "muntado malsukcesis: "

#: ../../standalone/drakconnect_.c:91
msgid "Del profile..."
msgstr ""

#: ../../standalone/drakconnect_.c:97
msgid "Profile to delete:"
msgstr ""

#: ../../standalone/drakconnect_.c:125
msgid "New profile..."
msgstr ""

#: ../../standalone/drakconnect_.c:131
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/drakconnect_.c:157
msgid "Hostname: "
msgstr "Po�tejo: "

#: ../../standalone/drakconnect_.c:164
#, fuzzy
msgid "Internet access"
msgstr "Interreto"

#: ../../standalone/drakconnect_.c:177
msgid "Type:"
msgstr "Speco:"

#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372
msgid "Gateway:"
msgstr "Kluzo:"

#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372
#, fuzzy
msgid "Interface:"
msgstr "Interreto"

#: ../../standalone/drakconnect_.c:191
msgid "Status:"
msgstr "Stato:"

#: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145
msgid "Wait please"
msgstr ""

#: ../../standalone/drakconnect_.c:216
#, fuzzy
msgid "Configure Internet Access..."
msgstr "Konfiguru servojn"

#: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445
msgid "LAN configuration"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakconnect_.c:228
msgid "Driver"
msgstr "Pelilo"

#: ../../standalone/drakconnect_.c:228
msgid "Interface"
msgstr "Interfaco"

#: ../../standalone/drakconnect_.c:228
msgid "Protocol"
msgstr "Protokolo"

#: ../../standalone/drakconnect_.c:228
#, fuzzy
msgid "State"
msgstr "Stato:"

#: ../../standalone/drakconnect_.c:240
#, fuzzy
msgid "Configure Local Area Network..."
msgstr "Konfiguru lokan reton"

#: ../../standalone/drakconnect_.c:252
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/drakconnect_.c:253
msgid "Wizard..."
msgstr "Sor�isto..."

#: ../../standalone/drakconnect_.c:279
msgid "Apply"
msgstr "Apliku"

#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403
#: ../../standalone/net_monitor_.c:457
msgid "Connected"
msgstr "Konektita"

#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403
#: ../../standalone/net_monitor_.c:457
msgid "Not connected"
msgstr "Ne konektita"

#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404
msgid "Connect..."
msgstr "Konektu..."

#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404
msgid "Disconnect..."
msgstr "Malkonektu..."

#: ../../standalone/drakconnect_.c:400
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""

#: ../../standalone/drakconnect_.c:427
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/drakconnect_.c:449
msgid "LAN Configuration"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakconnect_.c:460
#, c-format
msgid "Adapter %s: %s"
msgstr "Adaptilo %s: %s"

#: ../../standalone/drakconnect_.c:466
msgid "Boot Protocol"
msgstr ""

#: ../../standalone/drakconnect_.c:467
msgid "Started on boot"
msgstr ""

#: ../../standalone/drakconnect_.c:468
msgid "DHCP client"
msgstr ""

#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496
#, fuzzy
msgid "activate now"
msgstr "Aktiva"

#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496
#, fuzzy
msgid "deactivate now"
msgstr "Aktiva"

#: ../../standalone/drakconnect_.c:499
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""

#: ../../standalone/drakconnect_.c:556
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/drakconnect_.c:580
#, fuzzy
msgid "Internet connection configuration"
msgstr "Interreta konekta�o kaj konfiguro"

#: ../../standalone/drakconnect_.c:584
#, fuzzy
msgid "Internet Connection Configuration"
msgstr "Interreta konekta�o kaj konfiguro"

#: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94
msgid "Connection type: "
msgstr "Speco de konekto"

#: ../../standalone/drakconnect_.c:599
msgid "Parameters"
msgstr ""

#: ../../standalone/drakconnect_.c:618
msgid "Gateway"
msgstr "Kluzo"

#: ../../standalone/drakconnect_.c:627
msgid "Ethernet Card"
msgstr ""

#: ../../standalone/drakconnect_.c:628
msgid "DHCP Client"
msgstr ""

#: ../../standalone/drakfloppy_.c:39
msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-iso8859-3,*"

#: ../../standalone/drakfloppy_.c:40
msgid "Module name"
msgstr "Modulonomo"

#: ../../standalone/drakfloppy_.c:40
msgid "Size"
msgstr "Grandeco"

#: ../../standalone/drakfloppy_.c:45
msgid "drakfloppy"
msgstr "drakfloppy"

#: ../../standalone/drakfloppy_.c:63
msgid "boot disk creation"
msgstr "Startdiskokreado"

#: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84
msgid "default"
msgstr "defa�lta"

#: ../../standalone/drakfloppy_.c:87
#, c-format
msgid "DrakFloppy Error: %s"
msgstr "Eraro DrakFloppy: %s"

#: ../../standalone/drakfloppy_.c:98
msgid "kernel version"
msgstr "Kerna versio"

#: ../../standalone/drakfloppy_.c:104
msgid "General"
msgstr "�enerala"

#: ../../standalone/drakfloppy_.c:109
msgid "Expert Area"
msgstr "Spertulejo"

#: ../../standalone/drakfloppy_.c:112
msgid "mkinitrd optional arguments"
msgstr "mkinitrd opciaj argumentoj"

#: ../../standalone/drakfloppy_.c:113
msgid "Add a module"
msgstr "Aldonu modulon"

#: ../../standalone/drakfloppy_.c:133
msgid "force"
msgstr "devigu"

#: ../../standalone/drakfloppy_.c:134
msgid "if needed"
msgstr "se bezonata"

#: ../../standalone/drakfloppy_.c:135
msgid "omit scsi modules"
msgstr "forlasu SCSI-ajn modulojn"

#: ../../standalone/drakfloppy_.c:136
msgid "omit raid modules"
msgstr "forlasu RAID-ajn modulojn"

#: ../../standalone/drakfloppy_.c:172
msgid "Remove a module"
msgstr "Forprenu modulon"

#: ../../standalone/drakfloppy_.c:194
msgid "Output"
msgstr "Skribu"

#: ../../standalone/drakfloppy_.c:206
msgid "Build the disk"
msgstr "Konstruu la diskon"

#: ../../standalone/drakfloppy_.c:336
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "Kontrolu ke medio estas en la aparato %s"

#: ../../standalone/drakfloppy_.c:341
#, fuzzy, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Ne estas medio en aparato %s.\n"
"Bonvole en�ovu �in."

#: ../../standalone/drakfloppy_.c:344
#, c-format
msgid "Unable to fork: %s"
msgstr "Ne povis forki: %s"

#: ../../standalone/drakfloppy_.c:349
#, c-format
msgid ""
"Unable to close properly mkbootdisk: \n"
" %s \n"
" %s"
msgstr ""
"Ne povis �uste fermi mkbootdisk-on: \n"
" %s \n"
" %s"

#: ../../standalone/drakfont_.c:213
msgid "Search installed fonts"
msgstr ""

#: ../../standalone/drakfont_.c:215
msgid "Unselect fonts installed"
msgstr ""

#: ../../standalone/drakfont_.c:239
msgid "parse all fonts"
msgstr ""

#: ../../standalone/drakfont_.c:242
#, fuzzy
msgid "no fonts found"
msgstr "neniu retkarto trovita"

#: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305
#: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454
#: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493
#: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532
#, fuzzy
msgid "done"
msgstr "Finata"

#: ../../standalone/drakfont_.c:257
msgid "could not find any font in your mounted partitions"
msgstr ""

#: ../../standalone/drakfont_.c:303
msgid "Reselect correct fonts"
msgstr ""

#: ../../standalone/drakfont_.c:307
msgid "could not find any font.\n"
msgstr ""

#: ../../standalone/drakfont_.c:331
msgid "Search fonts in installed list"
msgstr ""

#: ../../standalone/drakfont_.c:359
msgid "Fonts copy"
msgstr ""

#: ../../standalone/drakfont_.c:363
#, fuzzy
msgid "True Type fonts installation"
msgstr "Preparas instaladon"

#: ../../standalone/drakfont_.c:371
msgid "please wait during ttmkfdir..."
msgstr ""

#: ../../standalone/drakfont_.c:377
msgid "True Type install done"
msgstr ""

#: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413
msgid "Fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417
#: ../../standalone/drakfont_.c:450
msgid "type1inst building"
msgstr ""

#: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427
msgid "Ghostscript referencing"
msgstr ""

#: ../../standalone/drakfont_.c:437
msgid "ttf fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:444
msgid "pfm fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:456
msgid "Suppress temporary Files"
msgstr ""

#: ../../standalone/drakfont_.c:459
#, fuzzy
msgid "Restart XFS"
msgstr "limigu"

#: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526
msgid "Suppress Fonts Files"
msgstr ""

#: ../../standalone/drakfont_.c:528
#, fuzzy
msgid "xfs restart"
msgstr "limigu"

#: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts using the normal way. In rare cases, bogus fonts "
"may hang up your X Server."
msgstr ""

#: ../../standalone/drakfont_.c:621
#, fuzzy
msgid "Fonts Importation"
msgstr "Formatu subdiskojn"

#: ../../standalone/drakfont_.c:650
msgid "Get Windows Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:658
msgid "Uninstall Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:669
#, fuzzy
msgid "Advanced Options"
msgstr "LAN Konfigura�o"

#: ../../standalone/drakfont_.c:677
#, fuzzy
msgid "Font List"
msgstr "Surmetingo"

#: ../../standalone/drakfont_.c:737
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakfont_.c:793
msgid ""
"drakfont Future Overview\n"
"        - Fonts import:\n"
"                pfb ( Adobe Type 1 binary )\n"
"                pfa ( Adobe Type 1 ASCII )\n"
"                ttf ( True-Type  )\n"
"                pcf.gz\n"
"                Speedo\n"
"                and Bitmap (PCF, BDF, and SNF)\n"
"        - Features\n"
"                - Install fonts from any directory\n"
"                - Get windows fonts on any vfat partitions\n"
"                - Get fonts on any partitions.\n"
"                - UN-installation of any fonts (even if not installed "
"through drakfont)\n"
"        - Support\n"
"              - Xfs\n"
"              - ghostscript & printer\n"
"              - Staroffice & printer\n"
"              - abiword\n"
"\t      - netscape\n"
"              - Koffice, Gnumeric, ... studying\n"
"              - all fonts supported by printer\n"
"              - anti-aliases by RENDER in Xfree86 .... \n"
"\t\t\t\tsupported by KDE.\n"
"\t\t\t\twill be supported by gnome 1.2.\n"
"Visual Interface:\n"
"        Window interface:\n"
"          - Fontselectiondialog widget\n"
"          - Command buttons under Fontselectiondialog (like the actual "
"frontend).\n"
"        Commands buttons:\n"
"          - import from windows partition.\n"
"                import from all fat32 partitions and look for winnt/windows/"
"font\n"
"                and import all (delete doublon) but don't import if already "
"exist.\n"
"          - import from directory\n"
"                look for if it exist before for each font and not delete the "
"original.\n"
"                (replace all, no, none)\n"
"                expert options:\n"
"                        ask the directory, and look for if it exist before\n"
"                        if it exist ask: (replace all, no, none)\n"
"          - uninstall with list per font type\n"
"        Expert additional switch\n"
"          - option support:   ghostscript, Staroffice, etc...\n"
"                check-button. (by default all check)\n"
"          - Printer Application Fonts Support...\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakfont_.c:862
#, fuzzy
msgid "Choose the applications that will support the fonts:"
msgstr "Elektu la subdiskoj kiuj vi deziras formati"

#: ../../standalone/drakfont_.c:870
msgid "Ghostscript"
msgstr ""

#: ../../standalone/drakfont_.c:877
#, fuzzy
msgid "StarOffice"
msgstr "Oficejo"

#: ../../standalone/drakfont_.c:884
#, fuzzy
msgid "Abiword"
msgstr "�esigu"

#: ../../standalone/drakfont_.c:891
#, fuzzy
msgid "Generic Printers"
msgstr "Printilo"

#: ../../standalone/drakfont_.c:958
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: ../../standalone/drakfont_.c:1005
#, fuzzy
msgid "Install List"
msgstr "Instalu sistemon"

#: ../../standalone/drakfont_.c:1048
msgid "click here if you are sure."
msgstr ""

#: ../../standalone/drakfont_.c:1055
msgid "here if no."
msgstr ""

#: ../../standalone/drakfont_.c:1112
msgid "Unselected All"
msgstr ""

#: ../../standalone/drakfont_.c:1116
#, fuzzy
msgid "Selected All"
msgstr "Elektu dosieron"

#: ../../standalone/drakfont_.c:1120
#, fuzzy
msgid "Remove List"
msgstr "Malproksima printilo"

#: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175
msgid "Initials tests"
msgstr ""

#: ../../standalone/drakfont_.c:1145
#, fuzzy
msgid "Copy fonts on your system"
msgstr "Via komputilo ne havas retadaptilon!"

#: ../../standalone/drakfont_.c:1149
msgid "Install & convert Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:1153
#, fuzzy
msgid "Post Install"
msgstr "Instalu"

#: ../../standalone/drakfont_.c:1178
#, fuzzy
msgid "Remove fonts on your system"
msgstr "Via komputilo ne havas retadaptilon!"

#: ../../standalone/drakfont_.c:1182
#, fuzzy
msgid "Post Uninstall"
msgstr "Eliru instalprogramon"

#: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182
msgid "Internet Connection Sharing"
msgstr "Disdividado de Interreta Konekto"

#: ../../standalone/drakgw_.c:114
msgid "Sorry, we support only 2.4 kernels."
msgstr ""

#: ../../standalone/drakgw_.c:125
msgid "Internet Connection Sharing currently enabled"
msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"

#: ../../standalone/drakgw_.c:126
#, fuzzy
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"

#: ../../standalone/drakgw_.c:130
msgid "disable"
msgstr "malebligu"

#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154
msgid "dismiss"
msgstr "forsendu"

#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154
msgid "reconfigure"
msgstr "rekonfiguru"

#: ../../standalone/drakgw_.c:133
#, fuzzy
msgid "Disabling servers..."
msgstr "Detektas aparatojn..."

#: ../../standalone/drakgw_.c:142
#, fuzzy
msgid "Internet connection sharing is now disabled."
msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"

#: ../../standalone/drakgw_.c:149
msgid "Internet Connection Sharing currently disabled"
msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"

#: ../../standalone/drakgw_.c:150
#, fuzzy
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"

#: ../../standalone/drakgw_.c:154
msgid "enable"
msgstr "ebligu"

#: ../../standalone/drakgw_.c:161
msgid "Enabling servers..."
msgstr ""

#: ../../standalone/drakgw_.c:166
#, fuzzy
msgid "Internet connection sharing is now enabled."
msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"

#: ../../standalone/drakgw_.c:183
#, fuzzy
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Nun kiam via Interreta konekto estas konfigurata,\n"
"vi povas konfiguri vian komputilon por disdividi �ian Interretan konekton.\n"
"Notu: vi bezonas dedi�an Retadaptilon por konfiguri Lokan Reton (LAN).\n"
"\n"
"�u vi deziras konfiguri Disdividadon de Interreta Konekto?\n"

#: ../../standalone/drakgw_.c:211
#, c-format
msgid "Interface %s (using module %s)"
msgstr ""

#: ../../standalone/drakgw_.c:212
#, c-format
msgid "Interface %s"
msgstr "Interfaco %s"

#: ../../standalone/drakgw_.c:220
msgid "No network adapter on your system!"
msgstr "Via komputilo ne havas retadaptilon!"

#: ../../standalone/drakgw_.c:221
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lan�u la\n"
"aparatokonfigurilon."

#: ../../standalone/drakgw_.c:227
msgid "Network interface"
msgstr "Reta interfaco"

#: ../../standalone/drakgw_.c:228
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
"\n"
"%s\n"
"\n"
"�u vi deziras konfiguri vian Lokan Reton (LAN) kun �i tiu adaptilo?"

#: ../../standalone/drakgw_.c:235
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."

#: ../../standalone/drakgw_.c:261
#, fuzzy
msgid "Network interface already configured"
msgstr "Ekrano ne estas konfigurata"

#: ../../standalone/drakgw_.c:262
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: ../../standalone/drakgw_.c:267
#, fuzzy
msgid "Automatic reconfiguration"
msgstr "Post-instala konfigurado"

#: ../../standalone/drakgw_.c:267
msgid "No (experts only)"
msgstr ""

#: ../../standalone/drakgw_.c:268
#, fuzzy
msgid "Show current interface configuration"
msgstr "Interreta Konfigurado"

#: ../../standalone/drakgw_.c:269
#, fuzzy
msgid "Current interface configuration"
msgstr "Interreta Konfigurado"

#: ../../standalone/drakgw_.c:270
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""

#: ../../standalone/drakgw_.c:283
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Else, I can reconfigure your interface and (re)configure a DHCP server for "
"you.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw_.c:290
#, fuzzy
msgid "Local Network adress"
msgstr "neniu retkarto trovita"

#: ../../standalone/drakgw_.c:294
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw_.c:300
#, fuzzy
msgid "(This) DHCP Server IP"
msgstr "IP de SMB servilo"

#: ../../standalone/drakgw_.c:301
#, fuzzy
msgid "The DNS Server IP"
msgstr "IP de SMB servilo"

#: ../../standalone/drakgw_.c:302
#, fuzzy
msgid "The internal domain name"
msgstr "Neniu printilo"

#: ../../standalone/drakgw_.c:303
msgid "The DHCP start range"
msgstr ""

#: ../../standalone/drakgw_.c:304
msgid "The DHCP end range"
msgstr ""

#: ../../standalone/drakgw_.c:305
msgid "The default lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw_.c:306
msgid "The maximum lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw_.c:307
msgid "Re-configure interface and DHCP server"
msgstr ""

#: ../../standalone/drakgw_.c:314
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: ../../standalone/drakgw_.c:325
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"

#: ../../standalone/drakgw_.c:335
msgid "Configuring..."
msgstr "Mi konfiguras..."

#: ../../standalone/drakgw_.c:336
msgid "Configuring scripts, installing software, starting servers..."
msgstr ""
"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."

#: ../../standalone/drakgw_.c:372
#, c-format
msgid "Problems installing package %s"
msgstr "Problemoj instalante paka�on %s"

#: ../../standalone/drakgw_.c:505
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""

#: ../../standalone/drakgw_.c:523
#, fuzzy
msgid "The setup has already been done, but it's currently disabled."
msgstr ""
"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"

#: ../../standalone/drakgw_.c:524
#, fuzzy
msgid "The setup has already been done, and it's currently enabled."
msgstr ""
"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"

#: ../../standalone/drakgw_.c:525
#, fuzzy
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"

#: ../../standalone/drakgw_.c:531
#, fuzzy
msgid "Internet connection sharing configuration"
msgstr "Interreta konekta�o kaj konfiguro"

#: ../../standalone/drakgw_.c:539
#, fuzzy, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr "Disdividado de Interreta Konekto"

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "group"
msgstr "Laborgrupo"

#: ../../standalone/drakperm_.c:36
msgid "path"
msgstr ""

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "permissions"
msgstr "subdisko: %s"

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "user"
msgstr "Salutnomo"

#: ../../standalone/drakperm_.c:43
msgid "Up"
msgstr ""

#: ../../standalone/drakperm_.c:44
#, fuzzy
msgid "delete"
msgstr "Forigu"

#: ../../standalone/drakperm_.c:45
msgid "edit"
msgstr ""

#: ../../standalone/drakperm_.c:46
#, fuzzy
msgid "Down"
msgstr "Finata"

#: ../../standalone/drakperm_.c:47
#, fuzzy
msgid "add a rule"
msgstr "Aldonu modulon"

#: ../../standalone/drakperm_.c:48
msgid "select perm file to see/edit"
msgstr ""

#: ../../standalone/drakperm_.c:51
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: ../../standalone/drakperm_.c:56
#, fuzzy
msgid "Add a new rule at the end"
msgstr "Neniu printilo"

#: ../../standalone/drakperm_.c:57
msgid "Edit curent rule"
msgstr ""

#: ../../standalone/drakperm_.c:58
msgid "Up selected rule one level"
msgstr ""

#: ../../standalone/drakperm_.c:59
msgid "Down selected rule one level"
msgstr ""

#: ../../standalone/drakperm_.c:60
#, fuzzy
msgid "Delete selected rule"
msgstr "Malinstalu printvicon"

#: ../../standalone/drakperm_.c:224
msgid "browse"
msgstr ""

#: ../../standalone/drakperm_.c:231
#, fuzzy
msgid "Current user"
msgstr "Akceptu uzanto"

#: ../../standalone/drakperm_.c:236
#, fuzzy
msgid "Permissions"
msgstr "Versio: %s\n"

#: ../../standalone/drakperm_.c:237
msgid "Path"
msgstr ""

#: ../../standalone/drakperm_.c:238
#, fuzzy
msgid "Property"
msgstr "Pordo"

#: ../../standalone/drakperm_.c:240
msgid "sticky-bit"
msgstr ""

#: ../../standalone/drakperm_.c:241
msgid "Set-UID"
msgstr ""

#: ../../standalone/drakperm_.c:242
msgid "Set-GID"
msgstr ""

#: ../../standalone/drakperm_.c:296
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: ../../standalone/drakperm_.c:297
msgid "Use owner id for execution"
msgstr ""

#: ../../standalone/drakperm_.c:298
msgid "Use group id for execution"
msgstr ""

#: ../../standalone/drakperm_.c:299
msgid "when checked, owner and group won't be changed"
msgstr ""

#: ../../standalone/drakperm_.c:304
#, fuzzy
msgid "Path selection"
msgstr "Elektado de individuaj paka�oj"

#: ../../standalone/drakperm_.c:350
#, fuzzy
msgid "user :"
msgstr "Salutnomo"

#: ../../standalone/drakperm_.c:352
#, fuzzy
msgid "group :"
msgstr "Laborgrupo"

#: ../../standalone/draksound_.c:46
#, fuzzy
msgid "No Sound Card detected!"
msgstr "Ne konektita"

#: ../../standalone/draksound_.c:47
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/draksound_.c:54
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""

#: ../../standalone/draksplash_.c:21
msgid ""
"package 'ImageMagick' is required for correct working.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: ../../standalone/draksplash_.c:67
#, fuzzy
msgid "first step creation"
msgstr "Startdiskokreado"

#: ../../standalone/draksplash_.c:70
#, fuzzy
msgid "final resolution"
msgstr "Distingivo"

#: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163
#, fuzzy
msgid "choose image file"
msgstr "Elektu agon"

#: ../../standalone/draksplash_.c:72
#, fuzzy
msgid "Theme name"
msgstr "Opuza nomo"

#: ../../standalone/draksplash_.c:77
msgid "Browse"
msgstr ""

#: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153
#, fuzzy
msgid "Configure bootsplash picture"
msgstr "Konfiguru servojn"

#: ../../standalone/draksplash_.c:90
msgid ""
"x coordinate of text box\n"
"in number of character"
msgstr ""

#: ../../standalone/draksplash_.c:91
msgid ""
"y coordinate of text box\n"
"in number of character"
msgstr ""

#: ../../standalone/draksplash_.c:92
msgid "text width"
msgstr ""

#: ../../standalone/draksplash_.c:93
msgid "text box height"
msgstr ""

#: ../../standalone/draksplash_.c:94
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash_.c:95
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash_.c:96
msgid "the width of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:97
msgid "the heigth of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:98
msgid "the color of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:113
#, fuzzy
msgid "Preview"
msgstr "aparato"

#: ../../standalone/draksplash_.c:115
#, fuzzy
msgid "Save theme"
msgstr "Instalu sistemon"

#: ../../standalone/draksplash_.c:116
#, fuzzy
msgid "Choose color"
msgstr "Elektu ekranon"

#: ../../standalone/draksplash_.c:119
msgid "Display logo on Console"
msgstr ""

#: ../../standalone/draksplash_.c:120
msgid "Make kernel message quiet by default"
msgstr ""

#: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321
#, c-format
msgid "This theme haven't yet any bootsplash in %s !"
msgstr ""

#: ../../standalone/draksplash_.c:205
msgid "saving Bootsplash theme..."
msgstr ""

#: ../../standalone/draksplash_.c:428
#, fuzzy
msgid "ProgressBar color selection"
msgstr "Printilan Konekton"

#: ../../standalone/draksplash_.c:449
#, fuzzy
msgid "You must choose an image file first!"
msgstr "Printila Aparato URI"

#: ../../standalone/draksplash_.c:458
#, fuzzy
msgid "Generating preview ..."
msgstr "Detektas aparatojn..."

#. -PO  First %s is theme name, second %s (in parenthesis) is resolution
#: ../../standalone/draksplash_.c:506
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#: ../../standalone/drakxtv_.c:46
msgid ""
"XawTV isn't installed!\n"
"\n"
"\n"
"If you do have a TV card but DrakX has neither detected it (no bttv nor "
"saa7134\n"
"module in \"/etc/modules\") nor installed xawtv, please send the\n"
"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
"with subject \"undetected TV card\".\n"
"\n"
"\n"
"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""

#: ../../standalone/drakxtv_.c:63
#, fuzzy
msgid "Canada (cable)"
msgstr "Kanada (Kebeka)"

#: ../../standalone/drakxtv_.c:63
msgid "USA (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:63
msgid "USA (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:63
msgid "USA (cable-hrc)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "China (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "Japan (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "Japan (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "East Europe"
msgstr "E�ropo"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "France [SECAM]"
msgstr "Franca"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "Ireland"
msgstr "Islanda"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "West Europe"
msgstr "E�ropo"

#: ../../standalone/drakxtv_.c:66
#, fuzzy
msgid "Australia"
msgstr "seria"

#: ../../standalone/drakxtv_.c:66
msgid "Newzealand"
msgstr ""

#: ../../standalone/drakxtv_.c:67
msgid "South Africa"
msgstr ""

#: ../../standalone/drakxtv_.c:68
msgid "Argentina"
msgstr ""

#: ../../standalone/drakxtv_.c:69
msgid "Australian Optus cable TV"
msgstr ""

#: ../../standalone/drakxtv_.c:102
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: ../../standalone/drakxtv_.c:104
msgid "TV norm:"
msgstr ""

#: ../../standalone/drakxtv_.c:105
msgid "Area:"
msgstr ""

#: ../../standalone/drakxtv_.c:109
msgid "Scanning for TV channels in progress ..."
msgstr ""

#: ../../standalone/drakxtv_.c:116
msgid "Scanning for TV channels"
msgstr ""

#: ../../standalone/drakxtv_.c:120
#, fuzzy
msgid "There was an error while scanning for TV channels"
msgstr "Estis eraro dum instalado de paka�oj:"

#: ../../standalone/drakxtv_.c:121
msgid "XawTV isn't installed!"
msgstr ""

#: ../../standalone/drakxtv_.c:124
msgid "Have a nice day!"
msgstr ""

#: ../../standalone/drakxtv_.c:125
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: ../../standalone/drakxtv_.c:147
msgid "No TV Card detected!"
msgstr ""

#: ../../standalone/drakxtv_.c:148
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/harddrake2_.c:17
#, fuzzy
msgid "Alternative drivers"
msgstr "Printas provpa�o(j)n..."

#: ../../standalone/harddrake2_.c:18
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: ../../standalone/harddrake2_.c:20
msgid "Bus"
msgstr ""

#: ../../standalone/harddrake2_.c:21
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: ../../standalone/harddrake2_.c:22
#, fuzzy
msgid "Channel"
msgstr "Nuligu"

#: ../../standalone/harddrake2_.c:22
msgid "EIDE/SCSI channel"
msgstr ""

#: ../../standalone/harddrake2_.c:23
msgid "Bogomips"
msgstr ""

#: ../../standalone/harddrake2_.c:23
msgid ""
"The GNU/Linux kernel needs to do run a calculation loop at boot time\n"
"\t to initialize a timer counter.  Its result is stored as bogomips as a way "
"to \"benchmark\" the cpu."
msgstr ""

#: ../../standalone/harddrake2_.c:26
#, fuzzy
msgid "Bus identification"
msgstr "A�tentikigado"

#: ../../standalone/harddrake2_.c:27
msgid ""
"- PCI and USB devices: this list the vendor, device, subvendor and subdevice "
"PCI/USB ids"
msgstr ""

#: ../../standalone/harddrake2_.c:29
msgid "Location on the bus"
msgstr ""

#: ../../standalone/harddrake2_.c:30
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: ../../standalone/harddrake2_.c:33
#, fuzzy
msgid "Cache size"
msgstr "grandeco de pecoj"

#: ../../standalone/harddrake2_.c:33
msgid "Size of the (second level) cpu cache"
msgstr ""

#: ../../standalone/harddrake2_.c:34
msgid "Coma bug:"
msgstr ""

#: ../../standalone/harddrake2_.c:34
msgid "Does this cpu has Cyrix 6x86 Coma bug ?"
msgstr ""

#: ../../standalone/harddrake2_.c:35
msgid "Cpuid family"
msgstr ""

#: ../../standalone/harddrake2_.c:35
msgid "Family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: ../../standalone/harddrake2_.c:36
#, fuzzy
msgid "Cpuid level"
msgstr "Elektas sekurnivelon"

#: ../../standalone/harddrake2_.c:36
msgid "Information level that can be obtained through the cpuid instruction"
msgstr ""

#: ../../standalone/harddrake2_.c:37
msgid "Frequency (MHz)"
msgstr ""

#: ../../standalone/harddrake2_.c:37
msgid ""
"The cpu frequency in Mhz (Mega herz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: ../../standalone/harddrake2_.c:38
msgid "This field describes the device"
msgstr ""

#: ../../standalone/harddrake2_.c:39
#, fuzzy
msgid "Old device file"
msgstr "Elektu dosieron"

#: ../../standalone/harddrake2_.c:40
msgid "old static device name used in dev package"
msgstr ""

#: ../../standalone/harddrake2_.c:41
#, fuzzy
msgid "New devfs device"
msgstr "Prokura kluzaparato"

#: ../../standalone/harddrake2_.c:42
msgid "new dinamic device name generated by incore kernel devfs"
msgstr ""

#: ../../standalone/harddrake2_.c:43
#, fuzzy
msgid "Module"
msgstr "Muso"

#: ../../standalone/harddrake2_.c:43
msgid "the module of the GNU/Linux kernel that handle that device"
msgstr ""

#: ../../standalone/harddrake2_.c:44
msgid "CPU flags reported by the kernel"
msgstr ""

#: ../../standalone/harddrake2_.c:44
msgid "Flags"
msgstr ""

#: ../../standalone/harddrake2_.c:45
msgid "Fdiv bug"
msgstr ""

#: ../../standalone/harddrake2_.c:46
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the attended precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: ../../standalone/harddrake2_.c:49
msgid "Is FPU present"
msgstr ""

#: ../../standalone/harddrake2_.c:49
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: ../../standalone/harddrake2_.c:50
msgid "Does FPU have an irq vector"
msgstr ""

#: ../../standalone/harddrake2_.c:50
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: ../../standalone/harddrake2_.c:51
msgid "Early pentium were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: ../../standalone/harddrake2_.c:51
msgid "F00f bug"
msgstr ""

#: ../../standalone/harddrake2_.c:52
msgid "Halt bug"
msgstr ""

#: ../../standalone/harddrake2_.c:53
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: ../../standalone/harddrake2_.c:55
#, fuzzy
msgid "Floppy format"
msgstr "Formatu"

#: ../../standalone/harddrake2_.c:55
msgid "Format of floppies the drive accept"
msgstr ""

#: ../../standalone/harddrake2_.c:56
#, fuzzy
msgid "Level"
msgstr "nivelo"

#: ../../standalone/harddrake2_.c:56
msgid "Sub generation of the cpu"
msgstr ""

#: ../../standalone/harddrake2_.c:57
msgid "Media class"
msgstr ""

#: ../../standalone/harddrake2_.c:57
msgid "class of hardware device"
msgstr ""

#: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59
#, fuzzy
msgid "Model"
msgstr "Muso"

#: ../../standalone/harddrake2_.c:58
#, fuzzy
msgid "hard disk model"
msgstr "Memoro de Karto (DMA)"

#: ../../standalone/harddrake2_.c:59
msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""

#: ../../standalone/harddrake2_.c:60
#, fuzzy
msgid "Model name"
msgstr "Modulonomo"

#: ../../standalone/harddrake2_.c:60
msgid "Official vendor name of the cpu"
msgstr ""

#: ../../standalone/harddrake2_.c:61
#, fuzzy
msgid "Number of buttons"
msgstr "2 butonoj"

#: ../../standalone/harddrake2_.c:62
#, fuzzy
msgid "Name"
msgstr "Nomo: "

#: ../../standalone/harddrake2_.c:63
#, fuzzy
msgid "network printer port"
msgstr "Reta Printilo (TCP/ingo)"

#: ../../standalone/harddrake2_.c:64
msgid "Processor ID"
msgstr ""

#: ../../standalone/harddrake2_.c:64
msgid "the number of the processor"
msgstr ""

#: ../../standalone/harddrake2_.c:65
#, fuzzy
msgid "Model stepping"
msgstr "Formatas"

#: ../../standalone/harddrake2_.c:65
msgid "Stepping of the cpu (sub model (generation) number)"
msgstr ""

#: ../../standalone/harddrake2_.c:66
#, fuzzy
msgid "The type of bus on which the mouse is connected"
msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."

#: ../../standalone/harddrake2_.c:67
msgid "the vendor name of the device"
msgstr ""

#: ../../standalone/harddrake2_.c:68
msgid "the vendor name of the processor"
msgstr ""

#: ../../standalone/harddrake2_.c:82
#, fuzzy
msgid "/_Quit"
msgstr "�esu"

#: ../../standalone/harddrake2_.c:83
#, fuzzy
msgid "/Autodetect _printers"
msgstr "Malproksima printilo"

#: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85
#: ../../standalone/logdrake_.c:81
msgid "/_Options"
msgstr "/_Opcioj"

#: ../../standalone/harddrake2_.c:85
#, fuzzy
msgid "/Autodetect _modems"
msgstr "Malproksima printilo"

#: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89
#: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102
#: ../../standalone/logdrake_.c:83
msgid "/_Help"
msgstr "/_Helpo"

#: ../../standalone/harddrake2_.c:89
#, fuzzy
msgid "/_Help..."
msgstr "/_Helpo"

#: ../../standalone/harddrake2_.c:92
msgid "Harddrake help"
msgstr ""

#: ../../standalone/harddrake2_.c:93
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: ../../standalone/harddrake2_.c:96
msgid ""
"Once you've selected a device, you'll be able to see explanations on fields "
"displayed on the right frame (\"Information\")"
msgstr ""

#: ../../standalone/harddrake2_.c:96
#, fuzzy
msgid "Select a device !"
msgstr "Elektu grafikan karton"

#: ../../standalone/harddrake2_.c:100
msgid "/_Report Bug"
msgstr "/_Raportu Cimo"

#: ../../standalone/harddrake2_.c:102
#, fuzzy
msgid "/_About..."
msgstr "/Helpo/_Pri..."

#: ../../standalone/harddrake2_.c:104
msgid "About Harddrake"
msgstr ""

#: ../../standalone/harddrake2_.c:105
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"Version:"
msgstr ""

#: ../../standalone/harddrake2_.c:106
#, fuzzy
msgid "Author:"
msgstr "A�tomate esploru"

#: ../../standalone/harddrake2_.c:113
#, fuzzy
msgid "Detection in progress"
msgstr "Duobla surmetingo %s"

#: ../../standalone/harddrake2_.c:119
#, fuzzy
msgid "Harddrake2 version "
msgstr "Detektado de fiksdisko(j)"

#: ../../standalone/harddrake2_.c:126
#, fuzzy
msgid "Detected hardware"
msgstr "Vidu hardvaran informon"

#: ../../standalone/harddrake2_.c:129
#, fuzzy
msgid "Information"
msgstr "Montru informon"

#: ../../standalone/harddrake2_.c:131
#, fuzzy
msgid "Configure module"
msgstr "Konfiguru muson"

#: ../../standalone/harddrake2_.c:137
msgid "Run config tool"
msgstr ""

#: ../../standalone/harddrake2_.c:143
#, fuzzy, c-format
msgid "Running \"%s\" ..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../standalone/harddrake2_.c:159
msgid ""
"Click on a device in the left tree in order to get its information displayed "
"here."
msgstr ""

#: ../../standalone/harddrake2_.c:231
msgid "primary"
msgstr ""

#: ../../standalone/harddrake2_.c:231
#, fuzzy
msgid "secondary"
msgstr "%d sekundoj"

#: ../../standalone/harddrake2_.c:260
#, fuzzy
msgid "/Autodetect modems"
msgstr "Malproksima printilo"

#: ../../standalone/harddrake2_.c:260
#, fuzzy
msgid "/Autodetect printers"
msgstr "Malproksima printilo"

#: ../../standalone/harddrake2_.c:261
#, fuzzy
msgid "/Options"
msgstr "/_Opcioj"

#: ../../standalone/keyboarddrake_.c:26
msgid "Please, choose your keyboard layout."
msgstr "Bonvole, elektu vian klavaran aran�on."

#: ../../standalone/keyboarddrake_.c:35
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""

#: ../../standalone/livedrake_.c:18
msgid "Change Cd-Rom"
msgstr "�an�u KD-ROM-on"

#: ../../standalone/livedrake_.c:19
#, fuzzy
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"�an�u vian KDROM!\n"
"\n"
"Bonvole, en�ovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
"\"\n"
"kiam vi finos.\n"
"Se vi ne havas �in, klaku \"Nuligu\" por eviti la instaladon de �i tiu KDROM."

#: ../../standalone/livedrake_.c:29
msgid "Unable to start live upgrade !!!\n"
msgstr ""

#: ../../standalone/localedrake_.c:34
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350
msgid "logdrake"
msgstr "logdrake"

#: ../../standalone/logdrake_.c:68
#, fuzzy
msgid "Show only for the selected day"
msgstr "Montru nur por �i tiu tago"

#: ../../standalone/logdrake_.c:75
msgid "/File/_New"
msgstr "/Dosiero/_Nova"

#: ../../standalone/logdrake_.c:75
msgid "<control>N"
msgstr "<stir>N"

#: ../../standalone/logdrake_.c:76
msgid "/File/_Open"
msgstr "/Dosiero/_Malfermu"

#: ../../standalone/logdrake_.c:76
msgid "<control>O"
msgstr "<stir>M"

#: ../../standalone/logdrake_.c:77
msgid "/File/_Save"
msgstr "/Dosiero/_Savu"

#: ../../standalone/logdrake_.c:77
msgid "<control>S"
msgstr "<stir>S"

#: ../../standalone/logdrake_.c:78
msgid "/File/Save _As"
msgstr "/Dosiero/Savu _Kiel"

#: ../../standalone/logdrake_.c:79
msgid "/File/-"
msgstr "/Dosiero/-"

#: ../../standalone/logdrake_.c:82
msgid "/Options/Test"
msgstr "/Opcioj/Provu"

#: ../../standalone/logdrake_.c:84
msgid "/Help/_About..."
msgstr "/Helpo/_Pri..."

#: ../../standalone/logdrake_.c:145
#, fuzzy
msgid "User"
msgstr "Salutnomo"

#: ../../standalone/logdrake_.c:146
#, fuzzy
msgid "Messages"
msgstr "mesa�oj"

#: ../../standalone/logdrake_.c:147
#, fuzzy
msgid "Syslog"
msgstr "sistema logdosiero (syslog)"

#: ../../standalone/logdrake_.c:148
msgid "Mandrake Tools Explanations"
msgstr ""

#: ../../standalone/logdrake_.c:151
msgid "search"
msgstr "ser�u"

#: ../../standalone/logdrake_.c:161
msgid "A tool to monitor your logs"
msgstr "Ilo por vidi vian logdosieron"

#: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91
msgid "Settings"
msgstr "Konfigura�oj"

#: ../../standalone/logdrake_.c:167
msgid "matching"
msgstr "konformanta(j)"

#: ../../standalone/logdrake_.c:168
msgid "but not matching"
msgstr "sed ne konformanta(j)"

#: ../../standalone/logdrake_.c:172
msgid "Choose file"
msgstr "Elektu dosieron"

#: ../../standalone/logdrake_.c:181
msgid "Calendar"
msgstr "Kalendaro"

#: ../../standalone/logdrake_.c:191
msgid "Content of the file"
msgstr "Enhavoj de la dosiero"

#: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375
msgid "Mail alert"
msgstr ""

#: ../../standalone/logdrake_.c:245
#, c-format
msgid "please wait, parsing file: %s"
msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"

#: ../../standalone/logdrake_.c:392
#, fuzzy
msgid "Mail alert configuration"
msgstr "Konfigura�on"

#: ../../standalone/logdrake_.c:393
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""

#: ../../standalone/logdrake_.c:400
msgid "Apache World Wide Web Server"
msgstr ""

#: ../../standalone/logdrake_.c:401
#, fuzzy
msgid "Domain Name Resolver"
msgstr "Domajna nomo"

#: ../../standalone/logdrake_.c:402
#, fuzzy
msgid "Ftp Server"
msgstr "NIS Servilo"

#: ../../standalone/logdrake_.c:403
#, fuzzy
msgid "Postfix Mail Server"
msgstr "Datumbazoj"

#: ../../standalone/logdrake_.c:404
#, fuzzy
msgid "Samba Server"
msgstr "NIS Servilo"

#: ../../standalone/logdrake_.c:405
#, fuzzy
msgid "SSH Server"
msgstr "NIS Servilo"

#: ../../standalone/logdrake_.c:406
#, fuzzy
msgid "Webmin Service"
msgstr "Servilo"

#: ../../standalone/logdrake_.c:407
#, fuzzy
msgid "Xinetd Service"
msgstr "Printservilo"

#: ../../standalone/logdrake_.c:414
#, fuzzy
msgid "service setting"
msgstr "Servilo"

#: ../../standalone/logdrake_.c:415
msgid ""
"You will receive an alert if one of the selected services is no more running"
msgstr ""

#: ../../standalone/logdrake_.c:428
#, fuzzy
msgid "load setting"
msgstr "Formatas"

#: ../../standalone/logdrake_.c:429
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: ../../standalone/logdrake_.c:444
#, fuzzy
msgid "alert configuration"
msgstr "Interreta Konfigurado"

#: ../../standalone/logdrake_.c:445
#, fuzzy
msgid "Please enter your email address below "
msgstr "Bonvole provu denove"

#: ../../standalone/logdrake_.c:486
msgid "Save as.."
msgstr "Savu Kiel..."

#: ../../standalone/mousedrake_.c:37
msgid "Please, choose the type of your mouse."
msgstr "Bonvole, elektu la specon de via muso."

#: ../../standalone/mousedrake_.c:50
msgid "Emulate third button?"
msgstr "�u vi deziras emuli trian musbutonon?"

#: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87
#, fuzzy
msgid "Network Monitoring"
msgstr "Reta Konfigura�o"

#: ../../standalone/net_monitor_.c:96
#, fuzzy
msgid "Profile "
msgstr "muntado malsukcesis: "

#: ../../standalone/net_monitor_.c:99
msgid "Statistics"
msgstr ""

#: ../../standalone/net_monitor_.c:103
#, fuzzy
msgid "Sending Speed:"
msgstr "Konservu en dosiero"

#: ../../standalone/net_monitor_.c:104
msgid "Receiving Speed:"
msgstr ""

#: ../../standalone/net_monitor_.c:106
#, fuzzy
msgid "Connection Time: "
msgstr "Speco de konekto"

#: ../../standalone/net_monitor_.c:113
msgid "Logs"
msgstr ""

#: ../../standalone/net_monitor_.c:147
#, fuzzy
msgid "Wait please, testing your connection..."
msgstr "Konfiguru interretan konekta�on"

#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191
#, fuzzy
msgid "Connecting to Internet "
msgstr "Konektu al la Interreto"

#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191
#, fuzzy
msgid "Disconnecting from Internet "
msgstr "Konektu al la Interreto"

#: ../../standalone/net_monitor_.c:222
msgid "Disconnection from Internet failed."
msgstr ""

#: ../../standalone/net_monitor_.c:223
msgid "Disconnection from Internet complete."
msgstr ""

#: ../../standalone/net_monitor_.c:225
#, fuzzy
msgid "Connection complete."
msgstr "Speco de konekto"

#: ../../standalone/net_monitor_.c:226
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""

#: ../../standalone/net_monitor_.c:330
#, fuzzy
msgid "Color configuration"
msgstr "Interreta Konfigurado"

#: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403
msgid "sent: "
msgstr ""

#: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407
msgid "received: "
msgstr ""

#: ../../standalone/net_monitor_.c:397
msgid "average"
msgstr ""

#: ../../standalone/net_monitor_.c:400
#, fuzzy
msgid "Local measure"
msgstr "Lokaj dosieroj"

#: ../../standalone/net_monitor_.c:432
msgid "transmitted"
msgstr ""

#: ../../standalone/net_monitor_.c:433
msgid "received"
msgstr ""

#: ../../standalone/net_monitor_.c:453
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: ../../standalone/net_monitor_.c:459
#, fuzzy, c-format
msgid "Connect %s"
msgstr "Konektu"

#: ../../standalone/net_monitor_.c:459
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "Malkonektu"

#: ../../standalone/printerdrake_.c:47
#, fuzzy
msgid "Reading printer data ..."
msgstr "Legas datumbason de CUPS peliloj..."

#: ../../standalone/scannerdrake_.c:39
#, fuzzy
msgid "Detecting devices ..."
msgstr "Detektas aparatojn..."

#: ../../standalone/scannerdrake_.c:39
msgid "Test ports"
msgstr "Provu pordojn"

#: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66
#: ../../standalone/scannerdrake_.c:79
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""

#: ../../standalone/scannerdrake_.c:54
#, fuzzy, c-format
msgid "%s found on %s, configure it?"
msgstr "�u vi deziras konfiguri printilon?"

#: ../../standalone/scannerdrake_.c:57
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: ../../standalone/scannerdrake_.c:63
#, fuzzy
msgid "Select a scanner"
msgstr "Elektu grafikan karton"

#: ../../standalone/scannerdrake_.c:91
#, c-format
msgid "This %s scanner is unsupported"
msgstr ""

#: ../../standalone/scannerdrake_.c:105
#, c-format
msgid ""
"Scannerdrake was not able to detect your %s scanner.\n"
"Please select the device where your scanner is plugged"
msgstr ""

#: ../../standalone/scannerdrake_.c:107
#, fuzzy
msgid "choose device"
msgstr "Starta aparato"

#: ../../standalone/scannerdrake_.c:113
#, c-format
msgid ""
"This %s scanner must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""

#: ../../standalone/scannerdrake_.c:118
#, c-format
msgid ""
"Your %s scanner has been configured.\n"
"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
"applications menu."
msgstr ""

#: ../../standalone/service_harddrake_.c:44
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: ../../standalone/service_harddrake_.c:48
msgid "Some devices were added:\n"
msgstr ""

#: ../../standalone/service_harddrake_.c:64
#, fuzzy
msgid "Hardware probing in progress"
msgstr "Duobla surmetingo %s"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "Elektu vian lingvon"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "Elektu instalklason"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "Detektado de fiksdisko(j)"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Konfiguru muson"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "Elektu vian klavaron"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr ""

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "Dosiersistemo konfiguro"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Formatu subdiskojn"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "Elektu paka�ojn"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "Instalu sistemon"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Aldonu uzulon"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "Konfiguru retumon"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Konfiguru servojn"

#: ../../steps.pm_.c:29
msgid "Install bootloader"
msgstr "Instalu restart-�argilon"

#: ../../steps.pm_.c:31
msgid "Create a bootdisk"
msgstr "Kreu pra�argdisketon"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Konfiguru X"

#: ../../steps.pm_.c:34
#, fuzzy
msgid "Install system updates"
msgstr "Instalu sistemon"

#: ../../steps.pm_.c:35
msgid "Exit install"
msgstr "Eliru instalprogramon"

#: ../../ugtk.pm_.c:636
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""

#: ../../ugtk2.pm_.c:711
msgid "utopia 25"
msgstr ""

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "TTT/FTP"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer (client)"
msgstr "Reta Printilo (ingo)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr ""

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Oficejo"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnoma Laborstacio"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr ""

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Laborstacio"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr ""

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr ""

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE Laborstacio"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Plurmedia - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Database"
msgstr "Datumbazoj"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Tools to ease the configuration of your computer"
msgstr "�u vi deziras provi la konfigura�on?"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Plurmedia - Sono"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentaro"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet station"
msgstr "Interreta Konfigurado"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Multimedia station"
msgstr "Plurmedia - Sono"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Configuration"
msgstr "LAN Konfigura�o"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Development"
msgstr "Programisto"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr ""

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Office Workstation"
msgstr "Laborstacio"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr ""

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS"

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj �apdosieroj"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Network Computer server"
msgstr "Reta Printilo (ingo)"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Game station"
msgstr "Dokumentaro"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr ""

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Plurmedia - Grafiko"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr ""

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr ""

#: ../../share/compssUsers:999
msgid "LSB"
msgstr ""

#: ../../share/compssUsers:999
#, fuzzy
msgid "Internet gateway"
msgstr "Interreto"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr ""

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr ""

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Redaktiloj, �eloj, dosieriloj, terminaloj"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr ""

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr ""

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Plurmedia - KD-ROM Kreado"

#: ../../share/compssUsers:999
#, fuzzy
msgid "Scientific Workstation"
msgstr "Laborstacio"

#, fuzzy
#~ msgid "cpu number "
#~ msgstr "Telefonnumero"

#~ msgid ""
#~ "You now have the opportunity to download encryption software.\n"
#~ "\n"
#~ "WARNING:\n"
#~ "\n"
#~ "Due to different general requirements applicable to these software and "
#~ "imposed\n"
#~ "by various jurisdictions, customer and/or end user of theses software "
#~ "should\n"
#~ "ensure that the laws of his/their jurisdiction allow him/them to "
#~ "download, stock\n"
#~ "and/or use these software.\n"
#~ "\n"
#~ "In addition customer and/or end user shall particularly be aware to not "
#~ "infringe\n"
#~ "the laws of his/their jurisdiction. Should customer and/or end user not\n"
#~ "respect the provision of these applicable laws, he/they will incure "
#~ "serious\n"
#~ "sanctions.\n"
#~ "\n"
#~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
#~ "liable\n"
#~ "for special, indirect or incidental damages whatsoever (including, but "
#~ "not\n"
#~ "limited to loss of profits, business interruption, loss of commercial "
#~ "data and\n"
#~ "other pecuniary losses, and eventual liabilities and indemnification to "
#~ "be paid\n"
#~ "pursuant to a court decision) arising out of use, possession, or the "
#~ "sole\n"
#~ "downloading of these software, to which customer and/or end user could\n"
#~ "eventually have access after having sign up the present agreement.\n"
#~ "\n"
#~ "\n"
#~ "For any queries relating to these agreement, please contact \n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"
#~ msgstr ""
#~ "Nun vi havas la �ancon el�uti softvaron por �ifrado.\n"
#~ "\n"
#~ "AVERTO:\n"
#~ "\n"
#~ "Pro malsamaj �eneralaj kondi�oj aplikeblaj al �i tiu softvaro kaj "
#~ "trudata\n"
#~ "de diversaj jurisdikcioj, la kliento kaj/a� fina uzanto de tiu softvaro\n"
#~ "devus certigi ke la le�oj de lia/ilia jurisdikcio permesas li/ili "
#~ "el�uti,\n"
#~ "stoki kaj/a� uzi tiun softvaron.\n"
#~ "\n"
#~ "Plue, la kliento kaj/a� fina uzanto scios specife atentos ne malobei la\n"
#~ "le�ojn de lia/ilia jurisdikcio.  Se la kliento kaj/a� la fina uzanto\n"
#~ "malobeas tiujn aplikeblajn le�ojn, li/ili altiros sur sin gravajn "
#~ "sankciojn.\n"
#~ "\n"
#~ "Neniuokaze a� Mandrakesoft a� �iaj fabrikistoj responsigos por "
#~ "specialaj,\n"
#~ "nerektaj a� hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
#~ "perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
#~ "aliaj monaj malprofitoj, kaj rezultaj �uldoj kaj indemizo pagenda "
#~ "konforme\n"
#~ "al priju�o) rezulte el uzado, posedado, a� sole el�utado de tiu softvaro, "
#~ "al\n"
#~ "kiu la kliento kaj/a� fina uzanto ne povis atingi post subskribi la "
#~ "nunan\n"
#~ "kontrakton.\n"
#~ "\n"
#~ "Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"

#, fuzzy
#~ msgid "Proxy configuration"
#~ msgstr "Konfigurado de prokuraj serviloj"

#~ msgid "port"
#~ msgstr "porto"

#, fuzzy
#~ msgid "Url should begin with 'http:'"
#~ msgstr "Prokura servilo devus esti http://..."

#, fuzzy
#~ msgid "login"
#~ msgstr "A�tomata-enregistrado"

#~ msgid "password"
#~ msgstr "pasvorto"

#, fuzzy
#~ msgid "re-type password"
#~ msgstr "Neniu pasvorto"

#~ msgid "The passwords don't match. Try again!"
#~ msgstr "La pasvortoj ne egalas.  Provu denove!"

#~ msgid "Can't write file %s"
#~ msgstr "Ne povas skribi dosieron %s."

#~ msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
#~ msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-iso8859-3,*"

#~ msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
#~ msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-iso8859-3,*"

#, fuzzy
#~ msgid "Please click on a medium"
#~ msgstr "Bonvolu klaki sur subdiskon"

#~ msgid "usage: drakfloppy\n"
#~ msgstr "uzado: drakfloppy\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage: harddrake [-h|--help] [--test]\n"
#~ msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"

#~ msgid "usage: keyboarddrake [--expert] [keyboard]\n"
#~ msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"

#, fuzzy
#~ msgid "detected on interface %s"
#~ msgstr "Reta interfaco"