# translation of DrakX-el.po to Greek # Greek translation for drakfloppy. # Copyright (C) 2001,2003 Free Software Foundation, Inc. # Thanos Kyritsis , 2001. # Νίκος Νύκταρης (Nick Niktaris) , 2003 # msgid "" msgstr "" "Project-Id-Version: DrakX-el\n" "POT-Creation-Date: 2004-02-19 18:02+0100\n" "PO-Revision-Date: 2003-06-14 23:44+0300\n" "Last-Translator: Νίκος Νύκταρης (Nick Niktaris) \n" "Language-Team: Greek \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.1\n" #: ../move/move.pm:359 #, c-format msgid "" "Your USB key doesn't have any valid Windows (FAT) partitions.\n" "We need one to continue (beside, it's more standard so that you\n" "will be able to move and access your files from machines\n" "running Windows). Please plug in an USB key containing a\n" "Windows partition instead.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:369 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../move/move.pm:380 #, c-format msgid "Need a key to save your data" msgstr "" #: ../move/move.pm:382 #, c-format msgid "Detect USB key again" msgstr "" #: ../move/move.pm:383 ../move/move.pm:413 #, c-format msgid "Continue without USB key" msgstr "" #: ../move/move.pm:394 ../move/move.pm:408 #, fuzzy, c-format msgid "Key isn't writable" msgstr "Το XawTV εγκαταστάθηκε!" #: ../move/move.pm:396 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1310 #, c-format msgid "Reboot" msgstr "Επανεκκίνηση" #: ../move/move.pm:410 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../move/move.pm:412 #, fuzzy, c-format msgid "Retry" msgstr "Επαναφορά" #: ../move/move.pm:423 #, c-format msgid "Setting up USB key" msgstr "" #: ../move/move.pm:423 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..." #: ../move/move.pm:445 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../move/move.pm:455 #, fuzzy, c-format msgid "Auto configuration" msgstr "Προσαρμοσμένη Ρύθμιση" #: ../move/move.pm:455 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..." #: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563 #: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117 #: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228 #: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384 #: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510 #: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82 #: install_steps_interactive.pm:40 interactive/http.pm:118 #: interactive/http.pm:119 network/netconnect.pm:753 network/netconnect.pm:846 #: network/netconnect.pm:849 network/netconnect.pm:894 #: network/netconnect.pm:898 network/netconnect.pm:965 #: network/netconnect.pm:1014 network/netconnect.pm:1019 #: network/netconnect.pm:1034 printer/printerdrake.pm:213 #: printer/printerdrake.pm:220 printer/printerdrake.pm:245 #: printer/printerdrake.pm:393 printer/printerdrake.pm:398 #: printer/printerdrake.pm:411 printer/printerdrake.pm:421 #: printer/printerdrake.pm:1052 printer/printerdrake.pm:1099 #: printer/printerdrake.pm:1174 printer/printerdrake.pm:1178 #: printer/printerdrake.pm:1349 printer/printerdrake.pm:1353 #: printer/printerdrake.pm:1357 printer/printerdrake.pm:1457 #: printer/printerdrake.pm:1461 printer/printerdrake.pm:1578 #: printer/printerdrake.pm:1582 printer/printerdrake.pm:1668 #: printer/printerdrake.pm:1755 printer/printerdrake.pm:2153 #: printer/printerdrake.pm:2419 printer/printerdrake.pm:2425 #: printer/printerdrake.pm:2842 printer/printerdrake.pm:2846 #: printer/printerdrake.pm:2850 printer/printerdrake.pm:3241 #: standalone/drakTermServ:399 standalone/drakTermServ:730 #: standalone/drakTermServ:737 standalone/drakTermServ:931 #: standalone/drakTermServ:1330 standalone/drakTermServ:1335 #: standalone/drakTermServ:1342 standalone/drakTermServ:1353 #: standalone/drakTermServ:1372 standalone/drakauth:36 #: standalone/drakbackup:766 standalone/drakbackup:881 #: standalone/drakbackup:1455 standalone/drakbackup:1488 #: standalone/drakbackup:2004 standalone/drakbackup:2177 #: standalone/drakbackup:2738 standalone/drakbackup:2805 #: standalone/drakbackup:4826 standalone/drakboot:235 standalone/drakbug:267 #: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:569 #: standalone/drakconnect:571 standalone/drakconnect:587 #: standalone/drakfloppy:301 standalone/drakfloppy:305 #: standalone/drakfloppy:311 standalone/drakfont:208 standalone/drakfont:221 #: standalone/drakfont:257 standalone/drakfont:597 standalone/draksplash:21 #: standalone/logdrake:171 standalone/logdrake:415 standalone/logdrake:420 #: standalone/scannerdrake:52 standalone/scannerdrake:194 #: standalone/scannerdrake:253 standalone/scannerdrake:676 #: standalone/scannerdrake:687 standalone/scannerdrake:826 #: standalone/scannerdrake:837 standalone/scannerdrake:902 wizards.pm:95 #: wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Σφάλμα" #: ../move/move.pm:503 install_steps.pm:83 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Προκλήθηκε ένα σφάλμα που δεν ξέρω πώς να το χειριστώ.\n" "Συνεχίστε με δική σας ευθύνη." #: ../move/move.pm:559 install_steps_interactive.pm:40 #, c-format msgid "An error occurred" msgstr "Προκλήθηκε σφάλμα" #: ../move/move.pm:565 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../move/move.pm:580 #, fuzzy, c-format msgid "Remove system config files" msgstr "Να αφαιρεθεί το αρχείο loopback;" #: ../move/move.pm:581 #, c-format msgid "Simply reboot" msgstr "" #: ../move/tree/mdk_totem:60 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../move/tree/mdk_totem:81 #, fuzzy, c-format msgid "Kill those programs" msgstr "πρόσβαση σε προγράμματα Χ" #: ../move/tree/mdk_totem:82 #, fuzzy, c-format msgid "No CDROM support" msgstr "Υποστήριξη ραδιοφώνου:" #: ../move/tree/mdk_totem:87 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../move/tree/mdk_totem:101 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: Xconfig/card.pm:16 #, c-format msgid "256 kB" msgstr "256 kB" #: Xconfig/card.pm:17 #, c-format msgid "512 kB" msgstr "512 kB" #: Xconfig/card.pm:18 #, c-format msgid "1 MB" msgstr "1 MB" #: Xconfig/card.pm:19 #, c-format msgid "2 MB" msgstr "2 MB" #: Xconfig/card.pm:20 #, c-format msgid "4 MB" msgstr "4 MB" #: Xconfig/card.pm:21 #, c-format msgid "8 MB" msgstr "8 MB" #: Xconfig/card.pm:22 #, c-format msgid "16 MB" msgstr "16 MB" #: Xconfig/card.pm:23 #, c-format msgid "32 MB" msgstr "32 MB" #: Xconfig/card.pm:24 #, c-format msgid "64 MB or more" msgstr "64 MB ή περισσότερα" #: Xconfig/card.pm:211 #, c-format msgid "X server" msgstr "εξυπηρετητής X" #: Xconfig/card.pm:212 #, c-format msgid "Choose an X server" msgstr "Επιλέξτε τον εξυπηρετητή Χ" #: Xconfig/card.pm:244 #, c-format msgid "Multi-head configuration" msgstr "Ρύθμιση πολλών κεφαλών" #: Xconfig/card.pm:245 #, fuzzy, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" "\n" " Τι?" #: Xconfig/card.pm:312 #, fuzzy, c-format msgid "Can't install XFree package: %s" msgstr "Εγκατάσταση πακέτου %s" #: Xconfig/card.pm:322 #, c-format msgid "Select the memory size of your graphics card" msgstr "Επιλέξτε το μέγεθος μνήμης της κάρτας γραφικών" #: Xconfig/card.pm:398 #, c-format msgid "XFree configuration" msgstr "Ρυθμίσεις XFree" #: Xconfig/card.pm:400 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Τι ρύθμιση XFree θέλετε να έχετε;" #: Xconfig/card.pm:434 #, c-format msgid "Configure all heads independently" msgstr "Ρύθμιση όλων των κεφαλών ανεξάρτητα" #: Xconfig/card.pm:435 #, c-format msgid "Use Xinerama extension" msgstr "Χρήση επέκτασης Xinerama" #: Xconfig/card.pm:440 #, c-format msgid "Configure only card \"%s\"%s" msgstr "Ρύθμιση μόνο της κάρτας \"%s\" %s" #: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s με επιτάχυνση τρισδιάστατων γραφικών" #: Xconfig/card.pm:470 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών μόνο με " "τα XFree %s.\n" "Η κάρτα σας υποστηρίζεται από τα XFree %s τα οποία μπορεί να δίνουν καλύτερη " "υποστήριξη για διδιάστατα γραφικά." #: Xconfig/card.pm:472 Xconfig/card.pm:495 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών στα XFree " "%s." #: Xconfig/card.pm:480 Xconfig/card.pm:501 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s με ΠΕΙΡΑΜΑΤΙΚΗ επιτάχυνση τρισδιάστατων γραφικών" #: Xconfig/card.pm:483 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών μόνο με " "τα XFree %s.\n" "ΠΡΟΣΟΧΗ: ΠΕΙΡΑΜΑΤΙΚΗ ΥΠΟΣΤΗΡΙΞΗ - ΜΠΟΡΕΙ ΝΑ ΠΑΓΩΣΕΙ ΤΟΝ ΥΠΟΛΟΓΙΣΤΗ ΣΑΣ!\n" "Η κάρτα σας υποστηρίζεται από τα XFree %s τα οποία μπορεί να δίνουν καλύτερη " "υποστήριξη για διδιάστατα γραφικά" #: Xconfig/card.pm:486 Xconfig/card.pm:503 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών στα XFree " "%s,\n" "ΠΡΟΣΟΧΗ: ΠΕΙΡΑΜΑΤΙΚΗ ΥΠΟΣΤΗΡΙΞΗ - ΜΠΟΡΕΙ ΝΑ ΠΑΓΩΣΕΙ ΤΟΝ ΥΠΟΛΟΓΙΣΤΗ ΣΑΣ." #: Xconfig/card.pm:509 #, c-format msgid "Xpmac (installation display driver)" msgstr "Xpmac (οδηγός προβολής εγκατάστασης)" #: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:818 #, c-format msgid "Custom" msgstr "Προσαρμοσμένο" #: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14 #: install_steps_interactive.pm:83 printer/printerdrake.pm:3871 #: standalone/draksplash:114 standalone/harddrake2:187 standalone/logdrake:176 #: standalone/scannerdrake:438 #, c-format msgid "Quit" msgstr "Έξοδος" #: Xconfig/main.pm:115 #, c-format msgid "Graphic Card" msgstr "Κάρτα Γραφικών" #: Xconfig/main.pm:118 Xconfig/monitor.pm:100 #, c-format msgid "Monitor" msgstr "Οθόνη" #: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228 #, c-format msgid "Resolution" msgstr "Ανάλυση" #: Xconfig/main.pm:126 #, c-format msgid "Test" msgstr "Δοκιμή" #: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410 #: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80 #: standalone/drakconnect:254 standalone/drakconnect:263 #: standalone/drakconnect:277 standalone/drakconnect:283 #: standalone/drakconnect:381 standalone/drakconnect:382 #: standalone/drakconnect:540 standalone/drakfont:491 standalone/drakfont:551 #: standalone/harddrake2:184 #, c-format msgid "Options" msgstr "Επιλογές" #: Xconfig/main.pm:180 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Διατήρηση υπαρχόντων ρυθμίσεων;\n" "Οι τρέχουσες ρυθμίσεις είναι:\n" "\n" "%s" #: Xconfig/monitor.pm:101 #, c-format msgid "Choose a monitor" msgstr "Επιλέξτε οθόνη" #: Xconfig/monitor.pm:107 #, c-format msgid "Plug'n Play" msgstr "Άμεσης τοποθέτησης και λειτουργίας" #: Xconfig/monitor.pm:108 mouse.pm:49 #, c-format msgid "Generic" msgstr "Γενική" #: Xconfig/monitor.pm:109 standalone/drakconnect:520 standalone/harddrake2:68 #: standalone/harddrake2:69 #, c-format msgid "Vendor" msgstr "Κατασκευαστής" #: Xconfig/monitor.pm:119 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: Xconfig/monitor.pm:124 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Οι δύο κρίσιμες παράμετροι είναι η συχνότητα κατακόρυφης ανανέωσης είναι η\n" "συχνότητα με την οποία ανανεώνεται ολόκληρη η οθόνη, καθώς και η συχνότητα\n" "οριζόντιας ανανέωσης, η οποία είναι η συχνότητα με την οποία ανανεώνονται\n" "οι οριζόντιες γραμμές.\n" "\n" "Είναι ΠΟΛΥ ΣΗΜΑΝΤΙΚΟ να μην επιλέξετε τύπο οθόνης του οποίου οι συχνότητες\n" "ανανέωσης είναι εκτός των ορίων της οθόνης σας: υπάρχει κίνδυνος " "καταστροφής\n" "της οθόνης σας. Αν δεν είστε σίγουροι, κάντε μια συντηρητική επιλογή." #: Xconfig/monitor.pm:131 #, c-format msgid "Horizontal refresh rate" msgstr "Συχνότητα οριζόντιας ανανέωσης" #: Xconfig/monitor.pm:132 #, c-format msgid "Vertical refresh rate" msgstr "Συχνότητα κατακόρυφης ανανέωσης" #: Xconfig/resolution_and_depth.pm:12 #, c-format msgid "256 colors (8 bits)" msgstr "256 χρώματα (8 bits)" #: Xconfig/resolution_and_depth.pm:13 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 χιλιάδες χρώματα (15 bits)" #: Xconfig/resolution_and_depth.pm:14 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 χιλιάδες χρώματα (16 bits)" #: Xconfig/resolution_and_depth.pm:15 #, c-format msgid "16 million colors (24 bits)" msgstr "16 εκατομμύρια χρώματα (24 bits)" #: Xconfig/resolution_and_depth.pm:16 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 δισεκατομμύρια χρώματα (32 bits)" #: Xconfig/resolution_and_depth.pm:141 #, c-format msgid "Resolutions" msgstr "Αναλύσεις" #: Xconfig/resolution_and_depth.pm:275 #, c-format msgid "Choose the resolution and the color depth" msgstr "Επιλέξτε ανάλυση και βάθος χρώματος" #: Xconfig/resolution_and_depth.pm:276 #, c-format msgid "Graphics card: %s" msgstr "Κάρτα γραφικών: %s" #: Xconfig/resolution_and_depth.pm:289 interactive.pm:403 #: interactive/gtk.pm:734 interactive/http.pm:103 interactive/http.pm:157 #: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39 #: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 #: standalone/drakbackup:4320 standalone/drakbackup:4352 #: standalone/drakbackup:4445 standalone/drakbackup:4462 #: standalone/drakbackup:4563 standalone/drakconnect:162 #: standalone/drakconnect:734 standalone/drakconnect:821 #: standalone/drakconnect:964 standalone/net_monitor:303 ugtk2.pm:412 #: ugtk2.pm:509 ugtk2.pm:1047 ugtk2.pm:1070 #, c-format msgid "Ok" msgstr "Εντάξει" #: Xconfig/resolution_and_depth.pm:289 any.pm:858 diskdrake/smbnfs_gtk.pm:81 #: help.pm:197 help.pm:457 install_steps_gtk.pm:488 #: install_steps_interactive.pm:787 interactive.pm:404 interactive/gtk.pm:738 #: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307 #: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142 #: interactive/stdio.pm:176 printer/printerdrake.pm:2920 #: standalone/drakautoinst:200 standalone/drakbackup:4284 #: standalone/drakbackup:4311 standalone/drakbackup:4336 #: standalone/drakbackup:4369 standalone/drakbackup:4395 #: standalone/drakbackup:4421 standalone/drakbackup:4478 #: standalone/drakbackup:4504 standalone/drakbackup:4534 #: standalone/drakbackup:4558 standalone/drakconnect:161 #: standalone/drakconnect:819 standalone/drakconnect:973 #: standalone/drakfont:657 standalone/drakfont:734 standalone/logdrake:176 #: standalone/net_monitor:299 ugtk2.pm:406 ugtk2.pm:507 ugtk2.pm:516 #: ugtk2.pm:1047 #, c-format msgid "Cancel" msgstr "Άκυρο" #: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154 #: install_steps_gtk.pm:267 install_steps_gtk.pm:667 interactive.pm:498 #: interactive/gtk.pm:620 interactive/gtk.pm:622 standalone/drakTermServ:313 #: standalone/drakbackup:4281 standalone/drakbackup:4308 #: standalone/drakbackup:4333 standalone/drakbackup:4366 #: standalone/drakbackup:4392 standalone/drakbackup:4418 #: standalone/drakbackup:4459 standalone/drakbackup:4475 #: standalone/drakbackup:4501 standalone/drakbackup:4530 #: standalone/drakbackup:4555 standalone/drakbackup:4580 #: standalone/drakbug:157 standalone/drakconnect:157 #: standalone/drakconnect:227 standalone/drakfont:509 standalone/drakperm:134 #: standalone/draksec:285 standalone/harddrake2:183 ugtk2.pm:1160 #: ugtk2.pm:1161 #, c-format msgid "Help" msgstr "Βοήθεια" #: Xconfig/test.pm:30 #, c-format msgid "Test of the configuration" msgstr "Δοκιμή ρυθμίσεων" #: Xconfig/test.pm:31 #, c-format msgid "Do you want to test the configuration?" msgstr "Θέλετε να δοκιμάσετε τις ρυθμίσεις;" #: Xconfig/test.pm:31 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" "Προσοχή: Η δοκιμή σε αυτή την κάρτα γραφικών μπορεί να παγώσει τον " "υπολογιστή σας" #: Xconfig/test.pm:71 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" "Παρουσιάστηκεένα σφάλμα:\n" "%s\n" "Δοκιμάστε να αλλάξετε μερικές παραμέτρους" #: Xconfig/test.pm:149 #, c-format msgid "Leaving in %d seconds" msgstr "Έξοδος σε %d δευτερόλεπτα" #: Xconfig/test.pm:149 #, c-format msgid "Is this the correct setting?" msgstr "Είναι σωστή η ρύθμιση;" #: Xconfig/various.pm:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "Διάταξη πληκτρολογίου: %s\n" #: Xconfig/various.pm:30 #, c-format msgid "Mouse type: %s\n" msgstr "Τύπος ποντικιού: %s\n" #: Xconfig/various.pm:31 #, c-format msgid "Mouse device: %s\n" msgstr "Συσκευή ποντικιού: %s\n" #: Xconfig/various.pm:32 #, c-format msgid "Monitor: %s\n" msgstr "Οθόνη: %s\n" #: Xconfig/various.pm:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Συχνότητα οριζόντιας ανανέωσης: %s\n" #: Xconfig/various.pm:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Συχνότητα κατακόρυφης ανανέωσης: %s\n" #: Xconfig/various.pm:35 #, c-format msgid "Graphics card: %s\n" msgstr "Κάρτα γραφικών: %s\n" #: Xconfig/various.pm:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Μνήμη κάρτας γραφικών: %s kB\n" #: Xconfig/various.pm:38 #, c-format msgid "Color depth: %s\n" msgstr "Βάθος χρώματος: %s\n" #: Xconfig/various.pm:39 #, c-format msgid "Resolution: %s\n" msgstr "Ανάλυση: %s\n" #: Xconfig/various.pm:41 #, c-format msgid "XFree86 server: %s\n" msgstr "Εξυπηρετητής XFree86: %s\n" #: Xconfig/various.pm:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "Οδηγός XFree86: %s\n" #: Xconfig/various.pm:71 #, c-format msgid "Graphical interface at startup" msgstr "Γραφικό περιβάλλον στην εκκίνηση" #: Xconfig/various.pm:73 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Μπορώ να ρυθμίσω το σύστημά σας έτσι ώστε να ξεκινάει αυτόματα σε\n" "γραφικό περιβάλλον (XFree).\n" "Επιθυμείτε την αυτόματη εκκίνηση γραφικού περιβάλλοντος;" #: Xconfig/various.pm:86 #, fuzzy, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" " Ολοκληρώθηκε?" #: Xconfig/various.pm:98 #, c-format msgid "What norm is your TV using?" msgstr "Ποιο σύστημα χρησιμοποιεί η τηλεόραση σας;" #: any.pm:98 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259 #: standalone/drakconnect:164 standalone/drakxtv:90 standalone/harddrake2:133 #: standalone/service_harddrake:94 #, c-format msgid "Please wait" msgstr "Παρακαλώ περιμένετε" #: any.pm:98 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "Πρόγραμμα εκκίνησης" #: any.pm:137 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Επιλέξατε να εγκαταστήσετε το πρόγραμμα εκκίνησης σε μια κατάτμηση.\n" "Εννοείτε ότι έχετε ήδη εγκατάσταση ένα άλλο πρόγραμμα εκκίνησης στον σκληρό " "σας δίσκο (π.χ. System Commander).\n" "\n" "Από ποιόν δίσκο ξεκινάτε;" #: any.pm:160 any.pm:192 help.pm:800 #, c-format msgid "First sector of drive (MBR)" msgstr "Πρώτος τομέας του δίσκου (MBR)" #: any.pm:161 #, c-format msgid "First sector of the root partition" msgstr "Πρώτος τομέας της κατάτμησης εκκίνησης" #: any.pm:163 #, c-format msgid "On Floppy" msgstr "Στην Δισκέτα" #: any.pm:165 help.pm:768 help.pm:800 printer/printerdrake.pm:3238 #, c-format msgid "Skip" msgstr "Παράλειψη" #: any.pm:170 #, c-format msgid "SILO Installation" msgstr "Εγκατάσταση SILO" #: any.pm:170 #, c-format msgid "LILO/grub Installation" msgstr "Εγκατάσταση LILO/grub" #: any.pm:171 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Πού θέλετε να εγκαταστήσετε το πρόγραμμα εκκίνησης;" #: any.pm:192 #, c-format msgid "First sector of boot partition" msgstr "Πρώτος τομέας της κατάτμησης εκκίνησης" #: any.pm:204 any.pm:239 #, c-format msgid "Bootloader main options" msgstr "Βασικές επιλογές προγράμματος εκκίνησης" #: any.pm:205 #, c-format msgid "Boot Style Configuration" msgstr "Ρύθμιση Τύπου Εκκίνησης" #: any.pm:209 #, c-format msgid "Give the ram size in MB" msgstr "Εισάγετε μέγεθος μνήμης σε MB" #: any.pm:211 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Η επιλογή ``Απαγόρευση επιλογών γραμμής εντολής'' είναι άχρηστη χωρίς κωδικό " "πρόσβασης" #: any.pm:212 any.pm:519 install_steps_interactive.pm:1158 #, c-format msgid "The passwords do not match" msgstr "Οι κωδικοί πρόσβασης είναι ανόμοιοι" #: any.pm:212 any.pm:519 diskdrake/interactive.pm:1255 #: install_steps_interactive.pm:1158 #, c-format msgid "Please try again" msgstr "Παρακαλώ προσπαθήστε ξανά" #: any.pm:217 any.pm:242 help.pm:768 #, c-format msgid "Bootloader to use" msgstr "Χρήση προγράμματος εκκίνησης" #: any.pm:219 #, c-format msgid "Bootloader installation" msgstr "Πρόγραμμα εκκίνησης" #: any.pm:221 any.pm:244 help.pm:768 #, c-format msgid "Boot device" msgstr "Συσκευή εκκίνησης" #: any.pm:223 #, c-format msgid "Delay before booting default image" msgstr "Καθυστέρηση πριν την εκκίνηση" #: any.pm:224 help.pm:768 #, c-format msgid "Enable ACPI" msgstr "Ενεργοποίηση ACPI" #: any.pm:225 #, c-format msgid "Force No APIC" msgstr "" #: any.pm:227 any.pm:546 diskdrake/smbnfs_gtk.pm:180 #: install_steps_interactive.pm:1163 network/netconnect.pm:491 #: printer/printerdrake.pm:1340 printer/printerdrake.pm:1454 #: standalone/drakbackup:1990 standalone/drakbackup:3875 #: standalone/drakconnect:916 standalone/drakconnect:944 #, c-format msgid "Password" msgstr "Κωδικός Πρόσβασης" #: any.pm:228 any.pm:547 install_steps_interactive.pm:1164 #, c-format msgid "Password (again)" msgstr "Κωδικός Πρόσβασης (ξανά)" #: any.pm:229 #, c-format msgid "Restrict command line options" msgstr "Απαγόρευση επιλογών γραμμής εντολής" #: any.pm:229 #, c-format msgid "restrict" msgstr "απαγόρευση" #: any.pm:231 #, c-format msgid "Clean /tmp at each boot" msgstr "Καθαρισμός /tmp σε κάθε εκκίνηση" #: any.pm:232 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Ακριβής ποσότητας μνήμης αν χρειάζεται (εντοπίστηκαν %d MB)" #: any.pm:234 #, c-format msgid "Enable multiple profiles" msgstr "Ενεργοποίηση πολλαπλών προφίλ" #: any.pm:243 #, c-format msgid "Init Message" msgstr "Μήνυμα Init" #: any.pm:245 #, c-format msgid "Open Firmware Delay" msgstr "Άνοιγμα Καθυστέρησης Firmware" #: any.pm:246 #, c-format msgid "Kernel Boot Timeout" msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα" #: any.pm:247 #, c-format msgid "Enable CD Boot?" msgstr "Ενεργοποίηση εκκίνησης από CD;" #: any.pm:248 #, c-format msgid "Enable OF Boot?" msgstr "Ενεργοποίηση OF εκκίνησης;" #: any.pm:249 #, c-format msgid "Default OS?" msgstr "Εξ ορισμού λειτουργικό;" #: any.pm:290 #, c-format msgid "Image" msgstr "Εικόνα" #: any.pm:291 any.pm:300 #, c-format msgid "Root" msgstr "Root" #: any.pm:292 any.pm:313 #, c-format msgid "Append" msgstr "Προσάρτηση" #: any.pm:294 #, c-format msgid "Video mode" msgstr "Ανάλυση οθόνης" #: any.pm:296 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:305 any.pm:310 any.pm:312 #, c-format msgid "Label" msgstr "Ετικέτα" #: any.pm:307 any.pm:317 harddrake/v4l.pm:236 standalone/drakfloppy:88 #: standalone/drakfloppy:94 #, c-format msgid "Default" msgstr "Προεπιλεγμένο" #: any.pm:314 #, c-format msgid "Initrd-size" msgstr "μέγεθος Initrd" #: any.pm:316 #, c-format msgid "NoVideo" msgstr "ΧωρίςVideo" #: any.pm:327 #, c-format msgid "Empty label not allowed" msgstr "Δεν επιτρέπεται άδεια ετικέτα" #: any.pm:328 #, c-format msgid "You must specify a kernel image" msgstr "Πρέπει να ορίσετε μια εικόνα πυρήνα" #: any.pm:328 #, c-format msgid "You must specify a root partition" msgstr "Πρέπει να ορίσετε μια κατάτμηση root" #: any.pm:329 #, c-format msgid "This label is already used" msgstr "Αυτή η ετικέτα χρησιμοποιείται ήδη" #: any.pm:342 #, c-format msgid "Which type of entry do you want to add?" msgstr "Τι τύπου επιλογή θέλετε να προσθέσετε;" #: any.pm:343 standalone/drakbackup:1904 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:343 #, c-format msgid "Other OS (SunOS...)" msgstr "Άλλο λειτουργικό (SunOS...)" #: any.pm:344 #, c-format msgid "Other OS (MacOS...)" msgstr "Άλλο λειτουργικό (MacOS...)" #: any.pm:344 #, c-format msgid "Other OS (windows...)" msgstr "Άλλο λειτουργικό (windows...)" #: any.pm:372 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Υπάρχουν οι ακόλουθες επιλογές.\n" "Μπορείτε να προσθέσετε κι άλλες ή να αλλάξετε τις υπάρχουσες." #: any.pm:504 #, c-format msgid "access to X programs" msgstr "πρόσβαση σε προγράμματα Χ" #: any.pm:505 #, c-format msgid "access to rpm tools" msgstr "πρόσβαση σε εργαλεία rpm" #: any.pm:506 #, c-format msgid "allow \"su\"" msgstr "δυνατότητα \"su\"" #: any.pm:507 #, c-format msgid "access to administrative files" msgstr "πρόσβαση σε διαχειριστικά αρχεία" #: any.pm:508 #, c-format msgid "access to network tools" msgstr "πρόσβαση σε εργαλεία δικτύου" #: any.pm:509 #, c-format msgid "access to compilation tools" msgstr "" #: any.pm:515 #, c-format msgid "(already added %s)" msgstr "(το %s έχει ήδη προστεθεί)" #: any.pm:520 #, c-format msgid "This password is too simple" msgstr "Ο κωδικός πρόσβασης είναι πολύ απλός" #: any.pm:521 #, c-format msgid "Please give a user name" msgstr "Παρακαλώ εισάγετε όνομα χρήστη" #: any.pm:522 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Το κωδικό όνομα μπορεί να περιέχει μόνο πεζά γράμματα, αριθμούς, `-' και `_'" #: any.pm:523 #, c-format msgid "The user name is too long" msgstr "Αυτό το όνομα χρήστη είναι πολύ μακρύ" #: any.pm:524 #, c-format msgid "This user name has already been added" msgstr "Αυτό το όνομα χρήστη υπάρχει ήδη" #: any.pm:528 #, c-format msgid "Add user" msgstr "Προσθήκη χρήστη" #: any.pm:529 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Εισάγετε χρήστη\n" "%s" #: any.pm:532 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158 #: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544 #: interactive/http.pm:152 printer/printerdrake.pm:165 #: printer/printerdrake.pm:352 printer/printerdrake.pm:3871 #: standalone/drakbackup:3094 standalone/scannerdrake:629 #: standalone/scannerdrake:779 #, c-format msgid "Done" msgstr "Ολοκληρώθηκε" #: any.pm:533 help.pm:52 #, c-format msgid "Accept user" msgstr "Αποδοχή χρήστη" #: any.pm:544 #, c-format msgid "Real name" msgstr "Πραγματικό όνομα" #: any.pm:545 help.pm:52 printer/printerdrake.pm:1339 #: printer/printerdrake.pm:1453 #, c-format msgid "User name" msgstr "Όνομα χρήστη" #: any.pm:548 #, c-format msgid "Shell" msgstr "Φλοιός (shell)" #: any.pm:550 #, c-format msgid "Icon" msgstr "Εικονίδιο" #: any.pm:591 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Αυτόματη σύνδεση" #: any.pm:592 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Μπορώ να ρυθμίσω το σύστημά σας έτσι ώστε να συνδέει αυτόματα έναν χρήστη." #: any.pm:593 help.pm:52 #, c-format msgid "Do you want to use this feature?" msgstr "Θέλετε να χρησιμοποιήσετε αυτή τη λειτουργία;" #: any.pm:594 #, c-format msgid "Choose the default user:" msgstr "Επιλέξτε τον προεπιλεγμένο χρήστη:" #: any.pm:595 #, c-format msgid "Choose the window manager to run:" msgstr "Επιλέξτε τον διαχειριστή παραθύρων που θέλετε να χρησιμοποιήσετε:" #: any.pm:607 #, c-format msgid "Please choose a language to use." msgstr "Παρακαλώ επιλέξτε τη γλώσσα." #: any.pm:628 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Το Mandrake Linux υποστηρίζει πολλαπλές γλώσσες.Επιλέξτε \n" "τις άλλες γλώσσες που θα είναι διαθέσιμες μετά το πέρας της \n" "εγκατάστασης και την επανεκκίνηση του συστήματός σας." #: any.pm:646 help.pm:660 #, c-format msgid "Use Unicode by default" msgstr "Προεπιλεγμένη η χρήση Unicode" #: any.pm:647 help.pm:660 #, c-format msgid "All languages" msgstr "Όλες οι γλώσσες" #: any.pm:683 help.pm:581 help.pm:991 install_steps_interactive.pm:907 #, c-format msgid "Country / Region" msgstr "Χώρα" #: any.pm:684 #, c-format msgid "Please choose your country." msgstr "Παρακαλώ επιλέξτε την χώρα σας." #: any.pm:686 #, c-format msgid "Here is the full list of available countries" msgstr "Αυτή είναι η πλήρης λίστα των διαθέσιμων χωρών" #: any.pm:687 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621 #: help.pm:991 install_steps_interactive.pm:114 #, c-format msgid "More" msgstr "Άλλα" #: any.pm:818 #, c-format msgid "No sharing" msgstr "Χωρίς κοινή χρήση" #: any.pm:818 #, c-format msgid "Allow all users" msgstr "Επιτρέπεται για όλους τους χρήστες" #: any.pm:822 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Θέλετε να επιτρέψετε στους χρήστες να έχουν κοινόχρηστους καταλόγους;\n" "Αν ναι τότε οι χρήστες θα μπορούν απλά να κάνουν κλικ στο \"Κοινόχρηστο\" " "στον konqueror και το nautilus.\n" "\n" "Το \"Προσαρμοσμένο\" επιτρέπει την ανά χρήστη ρύθμιση.\n" #: any.pm:838 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" "Μπορείτε να γίνει εξαγωγή με την χρήση NFS ή Samba. Παρακαλώ επιλέξτε ποίο " "θέλετε." #: any.pm:846 #, fuzzy, c-format msgid "The package %s is going to be removed." msgstr "Θα αφαιρεθούν τα παρακάτω πακέτα " #: any.pm:858 #, c-format msgid "Launch userdrake" msgstr "Εκκίνηση userdrake" #: any.pm:860 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Το κοινόχρηστο ανά χρήστη κάνει χρήση της ομάδας \"fileshare\". \n" "Μπορείτε να την προσθέσετε στον κάθε χρήστη σε αυτή την ομάδα με το " "userdrake." #: authentication.pm:12 #, c-format msgid "Local files" msgstr "Τοπικά αρχεία" #: authentication.pm:12 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:12 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:12 authentication.pm:50 #, c-format msgid "Windows Domain" msgstr "Τομέας Windows " #: authentication.pm:33 #, c-format msgid "Authentication LDAP" msgstr "Πιστοποίηση LDAP" #: authentication.pm:34 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: authentication.pm:35 #, c-format msgid "LDAP Server" msgstr "Εξυπηρετητής LDAP" #: authentication.pm:40 #, c-format msgid "Authentication NIS" msgstr "Πιστοποίηση NIS" #: authentication.pm:41 #, c-format msgid "NIS Domain" msgstr "Τομέας NIS" #: authentication.pm:42 #, c-format msgid "NIS Server" msgstr "Εξυπηρετητής NIS" #: authentication.pm:47 #, fuzzy, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Τομέας Windows εξυπηρετητής\n" " Τομέας Τομέας Windows \n" "\n" " Τομέας Windows Τομέας Όνομα χρήστη Κωδικός Πρόσβασης\n" "." #: authentication.pm:49 #, c-format msgid "Authentication Windows Domain" msgstr "Πιστοποίηση Τομέα Windows" #: authentication.pm:51 #, c-format msgid "Domain Admin User Name" msgstr "Όνομα Χρήστη Διαχειριστή Τομέα" #: authentication.pm:52 #, c-format msgid "Domain Admin Password" msgstr "Κωδικός Πρόσβασης Διαχειριστή Τομέα" #: authentication.pm:83 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Δεν μπορώ να χρησιμοποιήσω broadcast χωρίς τομέα NIS" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:542 #, fuzzy, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n" "\n" "EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n" "H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n" "\n" #: bootloader.pm:674 #, c-format msgid "SILO" msgstr "SILO" #: bootloader.pm:676 help.pm:768 #, c-format msgid "LILO with graphical menu" msgstr "LILO με γραφικό μενού" #: bootloader.pm:677 help.pm:768 #, c-format msgid "LILO with text menu" msgstr "LILO με μενού κειμένου" #: bootloader.pm:679 #, c-format msgid "Grub" msgstr "Grub" #: bootloader.pm:681 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:1150 #, c-format msgid "not enough room in /boot" msgstr "δεν υπάρχει αρκετός χώρος στο /boot" #: bootloader.pm:1178 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Δεν μπορείτε να εγκαταστήσετε το πρόγραμμα εκκίνησης σε κατάτμηση %s\n" #: bootloader.pm:1218 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" #: bootloader.pm:1225 #, c-format msgid "" "The bootloader can't be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" #: bootloader.pm:1226 #, fuzzy, c-format msgid "Re-install Boot Loader" msgstr "Πρόγραμμα εκκίνησης" #: common.pm:125 #, c-format msgid "KB" msgstr "KB" #: common.pm:125 #, c-format msgid "MB" msgstr "MB" #: common.pm:125 #, c-format msgid "GB" msgstr "GB" #: common.pm:133 #, c-format msgid "TB" msgstr "TB" #: common.pm:141 #, c-format msgid "%d minutes" msgstr "%d λεπτά" #: common.pm:143 #, c-format msgid "1 minute" msgstr "1 λεπτό" #: common.pm:145 #, c-format msgid "%d seconds" msgstr "%d δευτερόλεπτα" #: common.pm:196 #, c-format msgid "Can't make screenshots before partitioning" msgstr "Αδύνατη η λήψη στιγμιοτύπων πριν από την δημιουργία κατατμήσεων" #: common.pm:203 #, c-format msgid "Screenshots will be available after install in %s" msgstr "Τα στιγμιότυπα θα είναι διαθέσιμα μετά την εγκατάστασης στο %s" #: common.pm:268 #, c-format msgid "kdesu missing" msgstr "το kdesu λείπει" #: common.pm:271 #, c-format msgid "consolehelper missing" msgstr "το consolehelper λείπει" #: crypto.pm:14 crypto.pm:28 lang.pm:231 network/adsl_consts.pm:37 #: network/adsl_consts.pm:48 network/adsl_consts.pm:58 #: network/adsl_consts.pm:68 network/adsl_consts.pm:79 #: network/adsl_consts.pm:90 network/adsl_consts.pm:100 #: network/adsl_consts.pm:110 network/netconnect.pm:46 #, c-format msgid "France" msgstr "Γαλλία" #: crypto.pm:15 lang.pm:207 #, c-format msgid "Costa Rica" msgstr "Κόστα Ρίκα" #: crypto.pm:16 crypto.pm:29 lang.pm:179 network/adsl_consts.pm:20 #: network/adsl_consts.pm:30 network/netconnect.pm:49 #, c-format msgid "Belgium" msgstr "Βέλγιο" #: crypto.pm:17 crypto.pm:30 lang.pm:212 #, c-format msgid "Czech Republic" msgstr "Τσέχικη Δημοκρατία" #: crypto.pm:18 crypto.pm:31 lang.pm:213 network/adsl_consts.pm:126 #: network/adsl_consts.pm:134 #, c-format msgid "Germany" msgstr "Γερμανία" #: crypto.pm:19 crypto.pm:32 lang.pm:244 #, c-format msgid "Greece" msgstr "Ελλάδα" #: crypto.pm:20 crypto.pm:33 lang.pm:317 #, c-format msgid "Norway" msgstr "Νορβηγία" #: crypto.pm:21 crypto.pm:34 lang.pm:346 network/adsl_consts.pm:230 #, c-format msgid "Sweden" msgstr "Σουηδία" #: crypto.pm:22 crypto.pm:36 lang.pm:316 network/adsl_consts.pm:170 #: network/netconnect.pm:47 #, c-format msgid "Netherlands" msgstr "Ολλανδία" #: crypto.pm:23 crypto.pm:37 lang.pm:264 network/adsl_consts.pm:150 #: network/adsl_consts.pm:160 network/netconnect.pm:48 standalone/drakxtv:48 #, c-format msgid "Italy" msgstr "Ιταλία" #: crypto.pm:24 crypto.pm:38 lang.pm:172 #, c-format msgid "Austria" msgstr "Αυστρία" #: crypto.pm:35 crypto.pm:61 lang.pm:380 network/netconnect.pm:50 #, c-format msgid "United States" msgstr "Η.Π.Α." #: diskdrake/dav.pm:19 #, fuzzy, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "εξυπηρετητής\n" " εξυπηρετητής\n" " εξυπηρετητής\n" " Νέο." #: diskdrake/dav.pm:27 #, c-format msgid "New" msgstr "Νέο" #: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Αποσύνδεση" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Σύνδεση" #: diskdrake/dav.pm:65 help.pm:137 #, c-format msgid "Server" msgstr "Εξυπηρετητής" #: diskdrake/dav.pm:66 diskdrake/interactive.pm:408 #: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635 #: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Σημείο σύνδεσης" #: diskdrake/dav.pm:85 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Παρακαλώ εισάγετε την διεύθυνση του εξυπηρετητή WebDAV" #: diskdrake/dav.pm:89 #, c-format msgid "The URL must begin with http:// or https://" msgstr "Η διεύθυνση πρέπει να ξεκινά με http:// ή https://" #: diskdrake/dav.pm:111 #, c-format msgid "Server: " msgstr "Εξυπηρετητής:" #: diskdrake/dav.pm:112 diskdrake/interactive.pm:469 #: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225 #, c-format msgid "Mount point: " msgstr "Σημείο σύνδεσης: " #: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233 #, c-format msgid "Options: %s" msgstr "Επιλογές: %s" #: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995 #: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065 #, c-format msgid "Read carefully!" msgstr "Διαβάστε προσεκτικά!" #: diskdrake/hd_gtk.pm:96 #, c-format msgid "Please make a backup of your data first" msgstr "Παρακαλώ κάντε πρώτα ένα αντίγραφο ασφαλείας των δεδομένων σας" #: diskdrake/hd_gtk.pm:99 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Εάν σκοπεύετε να χρησιμοποιήσετε το aboot, προσέξτε να αφήσετε ελεύθερο χώρο " "(2048 τομείς είναι αρκετοί)\n" "στην αρχή του δίσκου" #: diskdrake/hd_gtk.pm:156 help.pm:544 #, c-format msgid "Wizard" msgstr "Οδηγός" #: diskdrake/hd_gtk.pm:189 #, c-format msgid "Choose action" msgstr "Επιλέξτε πράξη" #: diskdrake/hd_gtk.pm:193 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Έχετε μια μεγάλη κατάτμηση των Microsoft Windows \n" "Προτείνω πρώτα να αλλάξετε το μέγεθός της\n" "(Κάντε κλικ επάνω της και επιλέξτε \"Αλλαγή Μεγέθους\")" #: diskdrake/hd_gtk.pm:195 #, c-format msgid "Please click on a partition" msgstr "Παρακαλώ κάντε κλικ σε μια κατάτμηση" #: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:475 #, c-format msgid "Details" msgstr "Λεπτομέρειες" #: diskdrake/hd_gtk.pm:255 #, c-format msgid "No hard drives found" msgstr "Δεν βρέθηκαν δίσκοι!" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Ext2" msgstr "Ext2" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Journalised FS" msgstr "Journalised FS" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:326 #, c-format msgid "Windows" msgstr "Windows " #: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:327 mouse.pm:167 #: services.pm:164 standalone/drakbackup:1947 standalone/drakperm:250 #, c-format msgid "Other" msgstr "Άλλο" #: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165 #, c-format msgid "Empty" msgstr "Άδειο" #: diskdrake/hd_gtk.pm:331 #, c-format msgid "Filesystem types:" msgstr "Τύποι συστήματος αρχείων:" #: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353 #, c-format msgid "Use ``%s'' instead" msgstr "Χρησιμοποιήστε ``%s'' στη θέση του" #: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353 #: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569 #: diskdrake/removable.pm:26 diskdrake/removable.pm:49 #: standalone/harddrake2:67 #, c-format msgid "Type" msgstr "Τύπος" #: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431 #, c-format msgid "Create" msgstr "Δημιουργία" #: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418 #: standalone/drakperm:124 standalone/printerdrake:231 #, c-format msgid "Delete" msgstr "Διαγραφή" #: diskdrake/hd_gtk.pm:353 #, c-format msgid "Use ``Unmount'' first" msgstr "Κάντε πρώτα ``Αποσύνδεση''" #: diskdrake/interactive.pm:179 #, c-format msgid "Choose another partition" msgstr "Επιλέξτε άλλη κατάτμηση" #: diskdrake/interactive.pm:179 #, c-format msgid "Choose a partition" msgstr "Επιλέξτε κατάτμηση" #: diskdrake/interactive.pm:208 #, c-format msgid "Exit" msgstr "Έξοδος" #: diskdrake/interactive.pm:241 help.pm:544 #, c-format msgid "Undo" msgstr "Αναίρεση" #: diskdrake/interactive.pm:241 #, c-format msgid "Toggle to normal mode" msgstr "Αλλαγή σε κανονικό τρόπο λειτουργίας" #: diskdrake/interactive.pm:241 #, c-format msgid "Toggle to expert mode" msgstr "Αλλαγή σε προχωρημένο τρόπο λειτουργίας" #: diskdrake/interactive.pm:260 #, c-format msgid "Continue anyway?" msgstr "Να συνεχίσω;" #: diskdrake/interactive.pm:265 #, c-format msgid "Quit without saving" msgstr "Έξοδος χωρίς αποθήκευση" #: diskdrake/interactive.pm:265 #, c-format msgid "Quit without writing the partition table?" msgstr "Έξοδος χωρίς αποθήκευση του πίνακα κατατμήσεων;" #: diskdrake/interactive.pm:270 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Θέλετε να αποθηκεύσετε τις αλλαγές του /etc/fstab" #: diskdrake/interactive.pm:277 install_steps_interactive.pm:301 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" "Απαιτείται επανεκκίνηση για να ενεργοποιηθούν οι αλλαγές στον πίνακα " "κατατμήσεων" #: diskdrake/interactive.pm:290 help.pm:544 #, c-format msgid "Clear all" msgstr "Καθαρισμός όλων" #: diskdrake/interactive.pm:291 help.pm:544 #, c-format msgid "Auto allocate" msgstr "Αυτόματη κατανομή" #: diskdrake/interactive.pm:297 #, c-format msgid "Hard drive information" msgstr "Πληροφορίες σκληρού δίσκου" #: diskdrake/interactive.pm:329 #, c-format msgid "All primary partitions are used" msgstr "Όλες οι πρωτεύουσες κατατμήσεις είναι σε χρήση" #: diskdrake/interactive.pm:330 #, c-format msgid "I can't add any more partition" msgstr "Δεν μπορώ να προσθέσω κατατμήσεις" #: diskdrake/interactive.pm:331 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Για να προσθέσετε κατατμήσεις, παρακαλώ διαγράψτε μία έτσι ώστε να είναι " "δυνατή η προσθήκη εκτεταμένης κατάτμησης" #: diskdrake/interactive.pm:342 help.pm:544 #, c-format msgid "Save partition table" msgstr "Αποθήκευση πίνακα κατατμήσεων" #: diskdrake/interactive.pm:343 help.pm:544 #, c-format msgid "Restore partition table" msgstr "Επαναφορά πίνακα κατατμήσεων" #: diskdrake/interactive.pm:344 help.pm:544 #, c-format msgid "Rescue partition table" msgstr "Πίνακας κατατμήσεων διάσωσης" #: diskdrake/interactive.pm:346 help.pm:544 #, c-format msgid "Reload partition table" msgstr "Ανανέωση πίνακα κατατμήσεων" #: diskdrake/interactive.pm:348 #, c-format msgid "Removable media automounting" msgstr "Αυτόματη σύνδεση αποσπώμενων μονάδων" #: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377 #, c-format msgid "Select file" msgstr "Επιλέξτε αρχείο" #: diskdrake/interactive.pm:364 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Ο εφεδρικός πίνακας κατατμήσεων έχει διαφορετικό μέγεθος\n" "Να συνεχίσω;" #: diskdrake/interactive.pm:378 harddrake/sound.pm:222 keyboard.pm:311 #: network/netconnect.pm:353 printer/printerdrake.pm:2159 #: printer/printerdrake.pm:3246 printer/printerdrake.pm:3365 #: printer/printerdrake.pm:4338 standalone/drakTermServ:1040 #: standalone/drakTermServ:1715 standalone/drakbackup:765 #: standalone/drakbackup:865 standalone/drakboot:137 standalone/drakclock:200 #: standalone/drakconnect:856 standalone/drakfloppy:295 #, c-format msgid "Warning" msgstr "Προσοχή" #: diskdrake/interactive.pm:379 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Εισάγετε μια δισκέτα στον οδηγό δισκέτας\n" "Όλα τα δεδομένα σε αυτή τη δισκέτα θα χαθούν" #: diskdrake/interactive.pm:390 #, c-format msgid "Trying to rescue partition table" msgstr "Προσπάθεια διάσωσης πίνακα κατατμήσεων" #: diskdrake/interactive.pm:396 #, c-format msgid "Detailed information" msgstr "Λεπτομερείς πληροφορίες" #: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706 #, c-format msgid "Resize" msgstr "Αλλαγή μεγέθους" #: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774 #, c-format msgid "Move" msgstr "Μετακίνηση" #: diskdrake/interactive.pm:413 #, c-format msgid "Format" msgstr "Μορφοποίηση" #: diskdrake/interactive.pm:415 #, c-format msgid "Add to RAID" msgstr "Προσθήκη στο RAID" #: diskdrake/interactive.pm:416 #, c-format msgid "Add to LVM" msgstr "Προσθήκη στο LVM" #: diskdrake/interactive.pm:419 #, c-format msgid "Remove from RAID" msgstr "Αφαίρεση από το RAID" #: diskdrake/interactive.pm:420 #, c-format msgid "Remove from LVM" msgstr "Αφαίρεση από το LVM" #: diskdrake/interactive.pm:421 #, c-format msgid "Modify RAID" msgstr "Τροποποίηση RAID" #: diskdrake/interactive.pm:422 #, c-format msgid "Use for loopback" msgstr "Χρήση για loopback" #: diskdrake/interactive.pm:462 #, c-format msgid "Create a new partition" msgstr "Δημιουργία νέας κατάτμησης" #: diskdrake/interactive.pm:465 #, c-format msgid "Start sector: " msgstr "Αρχικός τομέας: " #: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876 #, c-format msgid "Size in MB: " msgstr "Μέγεθος σε MB" #: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877 #, c-format msgid "Filesystem type: " msgstr "Τύπος συστήματος αρχείων: " #: diskdrake/interactive.pm:473 #, c-format msgid "Preference: " msgstr "Προτίμηση: " #: diskdrake/interactive.pm:476 #, fuzzy, c-format msgid "Logical volume name " msgstr "Τοπική μέτρηση" #: diskdrake/interactive.pm:505 #, fuzzy, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "νέο\n" " πρωτεύουσα\n" " πρωτεύουσα." #: diskdrake/interactive.pm:535 #, c-format msgid "Remove the loopback file?" msgstr "Να αφαιρεθεί το αρχείο loopback;" #: diskdrake/interactive.pm:554 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Μετά την αλλαγή τύπου στην κατάτμηση %s, όλα τα δεδομένα σε αυτήν την " "κατάτμηση θα χαθούν" #: diskdrake/interactive.pm:565 #, c-format msgid "Change partition type" msgstr "Αλλαγή τύπου κατάτμησης" #: diskdrake/interactive.pm:566 diskdrake/removable.pm:48 #, c-format msgid "Which filesystem do you want?" msgstr "Ποιο σύστημα αρχείων προτιμάτε;" #: diskdrake/interactive.pm:574 #, c-format msgid "Switching from ext2 to ext3" msgstr "Αλλαγή από ext2 σε ext3" #: diskdrake/interactive.pm:603 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Πού θέλετε να συνδέσετε το αρχείο loopback %s;" #: diskdrake/interactive.pm:604 #, c-format msgid "Where do you want to mount device %s?" msgstr "Πού θέλετε να συνδέσετε την συσκευή %s;" #: diskdrake/interactive.pm:609 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Δεν μπορώ να αφαιρέσω το σημείο σύνδεσης καθώς αυτή η κατάτμηση " "χρησιμοποιείται\n" "για loopback. Αφαιρέστε πρώτα το loopback" #: diskdrake/interactive.pm:634 #, c-format msgid "Where do you want to mount %s?" msgstr "Πού θέλετε να συνδέσετε το %s;" #: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738 #: install_interactive.pm:156 install_interactive.pm:186 #, c-format msgid "Resizing" msgstr "Αλλαγή μεγέθους" #: diskdrake/interactive.pm:658 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Υπολογισμός FAT filesystem bounds" #: diskdrake/interactive.pm:694 #, c-format msgid "This partition is not resizeable" msgstr "Αυτή η κατάτμηση δεν μπορεί ν' αλλάξει μέγεθος." #: diskdrake/interactive.pm:699 #, c-format msgid "All data on this partition should be backed-up" msgstr "" "Πρέπει να γίνει αντίγραφο ασφαλείας όλων των δεδομένων σε αυτή την κατάτμηση" #: diskdrake/interactive.pm:701 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Μετά την αλλαγή μεγέθους στην κατάτμηση %s, όλα τα δεδομένα σε αυτήν την " "κατάτμηση θα χαθούν" #: diskdrake/interactive.pm:706 #, c-format msgid "Choose the new size" msgstr "Επιλέξτε το νέο μέγεθος" #: diskdrake/interactive.pm:707 #, c-format msgid "New size in MB: " msgstr "Νέο μέγεθος σε MB:" #: diskdrake/interactive.pm:751 install_interactive.pm:194 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: diskdrake/interactive.pm:775 #, c-format msgid "Which disk do you want to move it to?" msgstr "Σε ποιόν δίσκο θέλετε να μετακινηθείτε;" #: diskdrake/interactive.pm:776 #, c-format msgid "Sector" msgstr "Τομέας" #: diskdrake/interactive.pm:777 #, c-format msgid "Which sector do you want to move it to?" msgstr "Σε ποιόν τομέα θέλετε να μετακινηθείτε;" #: diskdrake/interactive.pm:780 #, c-format msgid "Moving" msgstr "Μετακίνηση σε εξέλιξη" #: diskdrake/interactive.pm:780 #, c-format msgid "Moving partition..." msgstr "Μετακίνηση κατάτμησης σε εξέλιξη..." #: diskdrake/interactive.pm:802 #, c-format msgid "Choose an existing RAID to add to" msgstr "Επιλέξτε ένα υπάρχον RAID στο οποίο θα γίνει η προσθήκη" #: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820 #, c-format msgid "new" msgstr "νέο" #: diskdrake/interactive.pm:818 #, c-format msgid "Choose an existing LVM to add to" msgstr "Επιλέξτε ένα υπάρχον LVM στο οποίο θα γίνει η προσθήκη" #: diskdrake/interactive.pm:824 #, c-format msgid "LVM name?" msgstr "όνομα LVM;" #: diskdrake/interactive.pm:861 #, c-format msgid "This partition can't be used for loopback" msgstr "Αυτή η κατάτμηση δεν μπορεί να χρησιμοποιηθεί για loopback" #: diskdrake/interactive.pm:874 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:875 #, c-format msgid "Loopback file name: " msgstr "Όνομα αρχείου loopback: " #: diskdrake/interactive.pm:880 #, c-format msgid "Give a file name" msgstr "Δώστε ένα όνομα αρχείου" #: diskdrake/interactive.pm:883 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Το αρχείο χρησιμοποιείται ήδη από άλλο loopback, επιλέξτε ένα άλλο" #: diskdrake/interactive.pm:884 #, c-format msgid "File already exists. Use it?" msgstr "Το αρχείο υπάρχει ήδη. Να το χρησιμοποιήσω;" #: diskdrake/interactive.pm:907 #, c-format msgid "Mount options" msgstr "Επιλογές σύνδεσης" #: diskdrake/interactive.pm:914 #, c-format msgid "Various" msgstr "Διάφορα" #: diskdrake/interactive.pm:978 #, c-format msgid "device" msgstr "συσκευή" #: diskdrake/interactive.pm:979 #, c-format msgid "level" msgstr "επίπεδο" #: diskdrake/interactive.pm:980 #, c-format msgid "chunk size" msgstr "μέγεθος chunk" #: diskdrake/interactive.pm:996 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Προσοχή: Αυτή η διαδικασία είναι επικίνδυνη." #: diskdrake/interactive.pm:1011 #, c-format msgid "What type of partitioning?" msgstr "Τι τύπος κατάτμησης;" #: diskdrake/interactive.pm:1027 #, c-format msgid "The package %s is needed. Install it?" msgstr "Το πακέτο %s είναι απαραίτητο. Να εγκατασταθεί;" #: diskdrake/interactive.pm:1056 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Απαιτείται επανεκκίνηση για να εφαρμοστούν οι αλλαγές" #: diskdrake/interactive.pm:1065 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Ο πίνακας κατατμήσεων του δίσκου %s θα αποθηκευτεί στον δίσκο!" #: diskdrake/interactive.pm:1078 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Μετά την μορφοποίηση της κατάτμησης %s, όλα τα δεδομένα σε αυτήν την " "κατάτμηση θα χαθούν" #: diskdrake/interactive.pm:1095 #, c-format msgid "Move files to the new partition" msgstr "Μετακίνηση αρχείων στην νέα κατάτμηση" #: diskdrake/interactive.pm:1095 #, c-format msgid "Hide files" msgstr "Απόκρυψη αρχείων" #: diskdrake/interactive.pm:1096 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" "Ο κατάλογος %s περιέχει ήδη δεδομένα\n" "(%s)" #: diskdrake/interactive.pm:1107 #, c-format msgid "Moving files to the new partition" msgstr "Μετακίνηση αρχείων στην νέα κατάτμηση" #: diskdrake/interactive.pm:1111 #, c-format msgid "Copying %s" msgstr "Αντιγραφή %s" #: diskdrake/interactive.pm:1115 #, c-format msgid "Removing %s" msgstr "Αφαίρεση %s" #: diskdrake/interactive.pm:1129 #, c-format msgid "partition %s is now known as %s" msgstr "Η κατάτμηση %s είναι τώρα γνωστή ως %s " #: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210 #, c-format msgid "Device: " msgstr "Συσκευή: " #: diskdrake/interactive.pm:1151 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Πιθανό DOS γράμμα δίσκου: %s \n" #: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163 #: diskdrake/interactive.pm:1229 #, c-format msgid "Type: " msgstr "Τύπος: " #: diskdrake/interactive.pm:1159 install_steps_gtk.pm:339 #, c-format msgid "Name: " msgstr "Όνομα: " #: diskdrake/interactive.pm:1167 #, c-format msgid "Start: sector %s\n" msgstr "Αρχή: τομέας %s\n" #: diskdrake/interactive.pm:1168 #, c-format msgid "Size: %s" msgstr "Μέγεθος: %s" #: diskdrake/interactive.pm:1170 #, c-format msgid ", %s sectors" msgstr ", %s τομείς" #: diskdrake/interactive.pm:1172 #, c-format msgid "Cylinder %d to %d\n" msgstr "Κύλινδρος από %d έως %d\n" #: diskdrake/interactive.pm:1173 #, c-format msgid "Number of logical extents: %d" msgstr "" #: diskdrake/interactive.pm:1174 #, c-format msgid "Formatted\n" msgstr "Μορφοποιημένος\n" #: diskdrake/interactive.pm:1175 #, c-format msgid "Not formatted\n" msgstr "Αμορφοποίητος\n" #: diskdrake/interactive.pm:1176 #, c-format msgid "Mounted\n" msgstr "Συνδεδεμένος\n" #: diskdrake/interactive.pm:1177 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: diskdrake/interactive.pm:1179 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Αρχείο (α) loopback:\n" " %s\n" #: diskdrake/interactive.pm:1180 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Κατάτμηση εκκίνησης εξ ορισμού\n" " (από MS-DOS, όχι από lilo)\n" #: diskdrake/interactive.pm:1182 #, c-format msgid "Level %s\n" msgstr "Επίπεδο %s\n" #: diskdrake/interactive.pm:1183 #, c-format msgid "Chunk size %s\n" msgstr "Μέγεθος chunk %s\n" #: diskdrake/interactive.pm:1184 #, c-format msgid "RAID-disks %s\n" msgstr "Δίσκοι RAID %s\n" #: diskdrake/interactive.pm:1186 #, c-format msgid "Loopback file name: %s" msgstr "Όνομα αρχείου loopback: %s" #: diskdrake/interactive.pm:1189 #, fuzzy, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "\n" " Οδηγός\n" #: diskdrake/interactive.pm:1192 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Αυτή είναι ειδική Bootstrap\n" "κατάτμηση για\n" "dual-booting το σύστημά σας.\n" #: diskdrake/interactive.pm:1211 #, c-format msgid "Read-only" msgstr "Μόνο για ανάγνωση" #: diskdrake/interactive.pm:1212 #, c-format msgid "Size: %s\n" msgstr "Μέγεθος: %s\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Γεωμετρία: %s κύλινδροι, %s κεφαλές, %s τομείς\n" #: diskdrake/interactive.pm:1214 #, c-format msgid "Info: " msgstr "Πληροφορίες: " #: diskdrake/interactive.pm:1215 #, c-format msgid "LVM-disks %s\n" msgstr "Δίσκοι LVM %s\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "Partition table type: %s\n" msgstr "Τύπος πίνακα κατατμήσεων: %s\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "on channel %d id %d\n" msgstr "στο κανάλι %d id %d\n" #: diskdrake/interactive.pm:1250 #, c-format msgid "Filesystem encryption key" msgstr "Κλειδί κρυπτογράφησης συστήματος αρχείων" #: diskdrake/interactive.pm:1251 #, c-format msgid "Choose your filesystem encryption key" msgstr "Επιλέξτε το κλειδί κρυπτογράφησης του συστήματος αρχείων" #: diskdrake/interactive.pm:1254 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Αυτός ο κωδικός πρόσβασης είναι πολύ απλός (πρέπει να έχει τουλάχιστον %d " "χαρακτήρες)" #: diskdrake/interactive.pm:1255 #, c-format msgid "The encryption keys do not match" msgstr "Τα κλειδιά κρυπτογράφησης είναι ανόμοια" #: diskdrake/interactive.pm:1258 network/netconnect.pm:889 #: standalone/drakconnect:370 #, c-format msgid "Encryption key" msgstr "Κλειδί κρυπτογράφησης" #: diskdrake/interactive.pm:1259 #, c-format msgid "Encryption key (again)" msgstr "Κλειδί κρυπτογράφησης (ξανά)" #: diskdrake/removable.pm:47 #, c-format msgid "Change type" msgstr "Αλλαγή τύπου" #: diskdrake/smbnfs_gtk.pm:163 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "Αδυναμία προσπέλασης με το όνομα χρήστη %s (λάθος κωδικός)" #: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176 #, c-format msgid "Domain Authentication Required" msgstr "Απαιτείται Πιστοποίηση Τομέα" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Which username" msgstr "Ποίο όνομα χρήστη" #: diskdrake/smbnfs_gtk.pm:168 #, c-format msgid "Another one" msgstr "Και άλλο" #: diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Παρακαλώ εισάγετε το όνομα χρήστη τον κωδικό πρόσβασης και το όνομα τομέα " "για τη σύνδεση στον host." #: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3874 #, c-format msgid "Username" msgstr "Όνομα χρήστη" #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Domain" msgstr "Τομέας" #: diskdrake/smbnfs_gtk.pm:205 #, c-format msgid "Search servers" msgstr "Αναζήτηση διακομιστών" #: diskdrake/smbnfs_gtk.pm:210 #, fuzzy, c-format msgid "Search new servers" msgstr "Αναζήτηση διακομιστών" #: do_pkgs.pm:21 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Το πακέτο %s πρέπει να αναβαθμιστεί. Θέλετε να το εγκαταστήσετε;" #: do_pkgs.pm:26 #, c-format msgid "Mandatory package %s is missing" msgstr "Ένα απαραίτητο αρχείο (το %s ) δεν υπάρχει" #: do_pkgs.pm:136 #, c-format msgid "Installing packages..." msgstr "Εγκατάσταση πακέτων..." #: do_pkgs.pm:210 #, fuzzy, c-format msgid "Removing packages..." msgstr "Αφαιρείται ο %s..." #: fs.pm:399 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: fs.pm:402 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: fs.pm:405 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: fs.pm:407 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: fs.pm:411 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: fs.pm:415 #, c-format msgid "Mount the file system read-only." msgstr "" #: fs.pm:417 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: fs.pm:421 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: fs.pm:429 #, c-format msgid "Give write access to ordinary users" msgstr "" #: fs.pm:565 fs.pm:575 fs.pm:579 fs.pm:583 fs.pm:587 fs.pm:591 swap.pm:12 #, c-format msgid "%s formatting of %s failed" msgstr "%s μορφοποίηση του %s απέτυχε" #: fs.pm:628 #, c-format msgid "I don't know how to format %s in type %s" msgstr "δεν ξέρω πώς να μορφοποιήσω το %s σε τύπο %s" #: fs.pm:635 fs.pm:642 #, c-format msgid "Formatting partition %s" msgstr "Μορφοποίηση κατάτμησης %s" #: fs.pm:639 #, c-format msgid "Creating and formatting file %s" msgstr "Δημιουργία και μορφοποίηση αρχείου %s" #: fs.pm:705 fs.pm:758 #, c-format msgid "Mounting partition %s" msgstr "Προσάρτηση κατάτμησης %s" #: fs.pm:706 fs.pm:759 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "η σύνδεση της κατάτμησης %s στον κατάλογο %s απέτυχε" #: fs.pm:726 fs.pm:734 #, c-format msgid "Checking %s" msgstr "Έλεγχος %s" #: fs.pm:775 partition_table.pm:636 #, c-format msgid "error unmounting %s: %s" msgstr "σφάλμα κατά την αποσύνδεση του %s: %s" #: fs.pm:807 #, c-format msgid "Enabling swap partition %s" msgstr "Ενεργοποίηση κατάτμησης swap %s" #: fsedit.pm:21 #, c-format msgid "simple" msgstr "απλό" #: fsedit.pm:25 #, c-format msgid "with /usr" msgstr "με /usr" #: fsedit.pm:30 #, c-format msgid "server" msgstr "εξυπηρετητής" #: fsedit.pm:254 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Δεν μπορώ να διαβάσω τον πίνακα κατατμήσεων της συσκευής %s,, είναι πολύ\n" "κατεστραμμένος :( Θα προσπαθήσω να συνεχίσω αφαιρώντας τις λανθασμένες \n" "κατατμήσεις (ΟΛΑ ΤΑ ΔΕΔΟΜΕΝΑ θα χαθούν!). Η άλλη επιλογή σας είναι να\n" "μην επιτρέψετε στο DrakX να αγγίξει τον πίνακα κατατμήσεων. \n" "Το σφάλμα είναι: %s\n" "\n" "Συμφωνείτε να διαγραφούν όλες οι κατατμήσεις;\n" #: fsedit.pm:514 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" "Δεν μπορείτε να χρησιμοποιήσετε το JFS για κατατμήσεις μικρότερες από 16MB" #: fsedit.pm:515 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" "Δεν μπορείτε να χρησιμοποιήσετε το ReiserFS για κατατμήσεις μικρότερες από " "32MB" #: fsedit.pm:534 #, c-format msgid "Mount points must begin with a leading /" msgstr "Το σημείο σύνδεσης πρέπει να ξεκινάει με /" #: fsedit.pm:535 #, fuzzy, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" "Το όνομα του εκτυπωτή πρέπει να περιέχει μόνο γράμματα, αριθμούς και τον " "χαρακτήρα underscore" #: fsedit.pm:536 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Υπάρχει ήδη κατάτμηση με σημείο σύνδεσης %s\n" #: fsedit.pm:538 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "\n" " Όχι\n" #: fsedit.pm:541 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "Δεν μπορείτε να χρησιμοποιήσετε μια κατάτμηση LVM για προσάρτηση %s" #: fsedit.pm:543 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: fsedit.pm:546 fsedit.pm:548 #, c-format msgid "This directory should remain within the root filesystem" msgstr "" "Αυτός ο κατάλογος πρέπει να παραμείνει στο ριζικό σύστημα αρχείων (root)" #: fsedit.pm:550 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Χρειάζεστε ένα πραγματικό σύστημα αρχείων (ext2/ext3, reiserfs, xfs, or jfs) " "για αυτό το σημείο σύνδεσης\n" #: fsedit.pm:552 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Δεν μπορείτε να χρησιμοποιήσετε κρυπτογραφημένο σύστημα αρχείων για " "προσάρτηση %s" #: fsedit.pm:613 #, c-format msgid "Not enough free space for auto-allocating" msgstr "" "Δεν υπάρχει αρκετός ελεύθερος χώρος για την αυτόματη δημιουργία νέων " "κατατμήσεων" #: fsedit.pm:615 #, c-format msgid "Nothing to do" msgstr "Καμία ενέργεια προς εκτέλεση" #: fsedit.pm:711 #, c-format msgid "Error opening %s for writing: %s" msgstr "Σφάλμα κατά το άνοιγμα του %s για εγγραφή: %s" #: harddrake/data.pm:53 #, c-format msgid "Floppy" msgstr "Δισκέτα" #: harddrake/data.pm:54 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:55 #, c-format msgid "Disk" msgstr "Δίσκος" #: harddrake/data.pm:56 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:57 #, c-format msgid "CD/DVD burners" msgstr "Συσκευές εγγραφής CD/DVD" #: harddrake/data.pm:58 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:59 standalone/drakbackup:2409 #, c-format msgid "Tape" msgstr "Ταινία" #: harddrake/data.pm:60 #, c-format msgid "Videocard" msgstr "Κάρτα οθόνης" #: harddrake/data.pm:61 #, c-format msgid "Tvcard" msgstr "Κάρτα TV" #: harddrake/data.pm:62 #, c-format msgid "Other MultiMedia devices" msgstr "Άλλα συσκευές Πολυμέσων" #: harddrake/data.pm:63 #, c-format msgid "Soundcard" msgstr "Κάρτα ήχου" #: harddrake/data.pm:64 #, c-format msgid "Webcam" msgstr "" #: harddrake/data.pm:68 #, c-format msgid "Processors" msgstr "Επεξεργαστές" #: harddrake/data.pm:69 #, fuzzy, c-format msgid "ISDN adapters" msgstr "Εσωτερική κάρτα ISDN" #: harddrake/data.pm:71 #, c-format msgid "Ethernetcard" msgstr "Κάρτα Δικτύου Ethernet" #: harddrake/data.pm:79 network/netconnect.pm:366 standalone/drakconnect:277 #: standalone/drakconnect:447 standalone/drakconnect:448 #: standalone/drakconnect:540 #, c-format msgid "Modem" msgstr "Μόντεμ" #: harddrake/data.pm:80 #, c-format msgid "ADSL adapters" msgstr "" #: harddrake/data.pm:82 #, c-format msgid "Bridges and system controllers" msgstr "" #: harddrake/data.pm:83 help.pm:203 help.pm:991 #: install_steps_interactive.pm:935 printer/printerdrake.pm:680 #: printer/printerdrake.pm:3970 #, c-format msgid "Printer" msgstr "Εκτυπωτής" #: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:928 #, c-format msgid "Mouse" msgstr "Ποντίκι" #: harddrake/data.pm:90 #, c-format msgid "Joystick" msgstr "Joystick" #: harddrake/data.pm:92 #, c-format msgid "(E)IDE/ATA controllers" msgstr "ελεγκτές (E)IDE/ATA" #: harddrake/data.pm:93 #, fuzzy, c-format msgid "Firewire controllers" msgstr "Ελεγκτές USB" #: harddrake/data.pm:94 #, c-format msgid "SCSI controllers" msgstr "ελεγκτές SCSI" #: harddrake/data.pm:95 #, c-format msgid "USB controllers" msgstr "Ελεγκτές USB" #: harddrake/data.pm:96 #, c-format msgid "SMBus controllers" msgstr "Ελεγκτές SMBus" #: harddrake/data.pm:97 #, c-format msgid "Scanner" msgstr "Σαρωτής" #: harddrake/data.pm:99 standalone/harddrake2:315 #, c-format msgid "Unknown/Others" msgstr "Άγνωστο/Άλλο" #: harddrake/data.pm:113 #, c-format msgid "cpu # " msgstr "επεξεργαστής # " #: harddrake/sound.pm:150 standalone/drakconnect:166 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Παρακαλώ περιμένετε... Εφαρμογή ρυθμίσεων" #: harddrake/sound.pm:182 #, c-format msgid "No alternative driver" msgstr "Κανένας εναλλακτικός οδηγός" #: harddrake/sound.pm:183 #, fuzzy, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Δεν υπάρχει γνωστός εναλλακτικός οδηγός OSS/ALSA για την κάρτα ήχου σας (%s)" #: harddrake/sound.pm:189 #, c-format msgid "Sound configuration" msgstr "Ρύθμιση ήχου" #: harddrake/sound.pm:191 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Εδώ μπορείτε να επιλέξετε έναν εναλλακτικό οδηγό (OSS ή ALSA) για την κάρτα " "ήχου σας (%s)" #: harddrake/sound.pm:193 #, fuzzy, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" " εξ' ορισμού" #: harddrake/sound.pm:195 #, fuzzy, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "Σύστημα\n" " Τι\n" "\n" " Για Προχωρημένους Linux\n" " PCI\n" "\n" "\n" "\n" "\n" "\n" " νέο" #: harddrake/sound.pm:209 harddrake/sound.pm:289 #, c-format msgid "Driver:" msgstr "Οδηγός:" #: harddrake/sound.pm:214 #, c-format msgid "Trouble shooting" msgstr "Επίλυση προβλημάτων" #: harddrake/sound.pm:222 #, fuzzy, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" "\n" "\n" "\n" "\n" " νέο." #: harddrake/sound.pm:230 #, c-format msgid "No open source driver" msgstr "Κανένας οδηγός ανοιχτού κώδικα" #: harddrake/sound.pm:231 #, fuzzy, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Δεν υπάρχει γνωστός εναλλακτικός οδηγός OSS/ALSA για την κάρτα ήχου σας (%s)" #: harddrake/sound.pm:234 #, c-format msgid "No known driver" msgstr "Κανένας γνωστός οδηγός" #: harddrake/sound.pm:235 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Δεν υπάρχει κάποιος γνωστός οδηγός για την κάρτα ήχου σας (%s)" #: harddrake/sound.pm:239 #, c-format msgid "Unknown driver" msgstr "Άγνωστος οδηγός" #: harddrake/sound.pm:240 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "Σφάλμα: Ο οδηγός \"%s\" της κάρτας ήχου σας δεν υπάρχει στη λίστα" #: harddrake/sound.pm:253 #, c-format msgid "Sound trouble shooting" msgstr "Επίλυση προβλημάτων Ήχου" #: harddrake/sound.pm:254 #, fuzzy, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "\n" "\n" "\n" "\n" " εξ' ορισμού\n" "\n" "\n" "\n" "\n" " ενεργοποίηση\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" #: harddrake/sound.pm:280 #, c-format msgid "Let me pick any driver" msgstr "Θα διαλέξω εγώ οδηγό" #: harddrake/sound.pm:283 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #: harddrake/sound.pm:284 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: harddrake/v4l.pm:14 harddrake/v4l.pm:66 #, c-format msgid "Auto-detect" msgstr "Αυτόματη ανίχνευση" #: harddrake/v4l.pm:67 harddrake/v4l.pm:219 #, c-format msgid "Unknown|Generic" msgstr "Άγνωστο|Γενικό" #: harddrake/v4l.pm:100 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Άγνωστο|CPH05X (bt878) [πολλοί κατασκευαστές]" #: harddrake/v4l.pm:101 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Άγνωστο|CPH06X (bt878) [πολλοί κατασκευαστές]" #: harddrake/v4l.pm:245 #, fuzzy, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Linux\n" " μετά βίας." #: harddrake/v4l.pm:248 #, c-format msgid "Card model:" msgstr "Μοντέλο κάρτας:" #: harddrake/v4l.pm:249 #, c-format msgid "Tuner type:" msgstr "" #: harddrake/v4l.pm:250 #, c-format msgid "Number of capture buffers:" msgstr "" #: harddrake/v4l.pm:250 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: harddrake/v4l.pm:252 #, c-format msgid "PLL setting:" msgstr "Ρυθμίσεις PLL:" #: harddrake/v4l.pm:253 #, c-format msgid "Radio support:" msgstr "Υποστήριξη ραδιοφώνου:" #: harddrake/v4l.pm:253 #, c-format msgid "enable radio support" msgstr "ενεργοποίηση ραδιοφώνου" #: help.pm:11 #, fuzzy, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n" "will reboot your computer." msgstr "" "\n" " Linux\n" " Αποδοχή\n" "." #: help.pm:14 install_steps_gtk.pm:596 install_steps_interactive.pm:88 #: install_steps_interactive.pm:697 standalone/drakautoinst:199 #, c-format msgid "Accept" msgstr "Αποδοχή" #: help.pm:17 #, fuzzy, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the user name. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user who\n" "can automatically log into the system when the computer boots up. If you\n" "are interested in that feature (and do not care much about local security),\n" "choose the desired user and window manager, then click \"%s\". If you are\n" "not interested in this feature, uncheck the \"%s\" box." msgstr "" "Linux χρήστης χρήστης\n" "\n" " χρήστης\n" "\n" "\n" "\n" "\n" " χρήστης\n" "\n" "\n" "\n" " χρήστης\n" "\n" "\n" "\n" "\n" " Χρήστης\n" " χρήστης\n" " εξ' ορισμού\n" " χρήστης\n" "\n" " απλό\n" "\n" "\n" " Αποδοχή χρήστης Προσθήκη χρήστης\n" "\n" " Επόμενο\n" "\n" " Για Προχωρημένους εξ' ορισμού\n" " χρήστης εξ' ορισμού\n" "\n" " Πότε χρήστης\n" "\n" "\n" " χρήστης Επόμενο\n" " Ολοκληρώθηκε\n" "." #: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005 #: install_steps_gtk.pm:275 interactive.pm:403 interactive/newt.pm:308 #: network/netconnect.pm:242 network/tools.pm:208 printer/printerdrake.pm:2922 #: standalone/drakTermServ:392 standalone/drakbackup:4487 #: standalone/drakbackup:4513 standalone/drakbackup:4543 #: standalone/drakbackup:4567 ugtk2.pm:509 #, c-format msgid "Next" msgstr "Επόμενο" #: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768 #: interactive.pm:371 #, c-format msgid "Advanced" msgstr "Για Προχωρημένους" #: help.pm:55 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Linux ανιχνεύθηκε\n" "\n" "\n" " Ολοκληρώθηκε\n" "\n" "\n" " Linux\n" "\n" " Όνομα\n" "\n" " Όνομα\n" "\n" "\n" " IDE\n" "\n" "\n" " IDE\n" "\n" "\n" " πρωτεύουσα IDE\n" "\n" " πρωτεύουσα IDE\n" "\n" " δευτερεύουσα IDE\n" "\n" " δευτερεύουσα IDE\n" "\n" "\n" "." #: help.pm:86 #, fuzzy, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. If a\n" "selected package is located on another CD-ROM, DrakX will eject the current\n" "CD and ask you to insert the correct CD as required." msgstr "" "Η εγκατάσταση του Mandrake Linux είναι μοιρασμένο σε αρκετά CD-ROM. Το \n" "DrakX ξέρει αν ένα επιλεγμένο πακέτο υπάρχει σε άλλο CD-ROM, θα εξάγει το \n" "τρέχον CD και θα ζητήσει να εισάγετε ένα άλλο όταν αυτό θα χρειαστεί." #: help.pm:91 #, fuzzy, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux sorts packages groups in four categories. You can\n" "mix and match applications from the various categories, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' category installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the groups that are in the workstation category.\n" "\n" " * \"%s\": if you plan on using your machine for programming, select the\n" "appropriate groups from that category.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" "\n" " Linux\n" "\n" "\n" "\n" "\n" " Linux\n" "\n" "\n" " Σταθμός Εργασίας\n" " Ανάπτυξη\n" "\n" " Σταθμός Εργασίας\n" "\n" "\n" "\n" " Ανάπτυξη\n" "\n" "\n" " Εξυπηρετητής εξυπηρετητής\n" "\n" "\n" "\n" "\n" "\n" "\n" " Μετακίνηση σε εξέλιξη Ομάδα εργασίας:\n" " Ομάδα εργασίας:\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξυπηρετητής\n" "\n" "\n" " Linux\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Αναβάθμιση\n" " νέο\n" "." #: help.pm:137 #, c-format msgid "Workstation" msgstr "Σταθμός Εργασίας" #: help.pm:137 #, c-format msgid "Development" msgstr "Ανάπτυξη" #: help.pm:137 #, c-format msgid "Graphical Environment" msgstr "Γραφικό Περιβάλλον" #: help.pm:137 install_steps_interactive.pm:559 #, c-format msgid "With X" msgstr "Με Χ" #: help.pm:137 #, fuzzy, c-format msgid "With basic documentation" msgstr "Με την βασική τεκμηρίωση (συνιστάται!)" #: help.pm:137 #, fuzzy, c-format msgid "Truly minimal install" msgstr "Ελάχιστη Εγκατάσταση" #: help.pm:137 install_steps_gtk.pm:270 install_steps_interactive.pm:605 #, c-format msgid "Individual package selection" msgstr "Επιλογή ξεχωριστών πακέτων" #: help.pm:137 help.pm:602 #, c-format msgid "Upgrade" msgstr "Αναβάθμιση" #: help.pm:140 #, fuzzy, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each them such\n" "that installation of one package requires that some other program is also\n" "required to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξυπηρετητής\n" " Ομάδα εργασίας:\n" "\n" " εξ' ορισμού Linux\n" "\n" "\n" " Linux\n" "\n" " Όχι Ναι\n" "\n" " εξ' ορισμού\n" "\n" " απενεργοποίηση\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "." #: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:422 #: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:218 #: ugtk2.pm:1046 wizards.pm:156 #, c-format msgid "No" msgstr "Όχι" #: help.pm:172 help.pm:301 help.pm:457 install_any.pm:422 interactive.pm:149 #: modules/interactive.pm:71 standalone/drakgw:280 standalone/drakgw:281 #: standalone/drakgw:289 standalone/drakgw:299 standalone/harddrake2:217 #: ugtk2.pm:1046 wizards.pm:156 #, c-format msgid "Yes" msgstr "Ναι" #: help.pm:172 #, c-format msgid "Automatic dependencies" msgstr "" #: help.pm:175 #, fuzzy, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to auto-detect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "About Winmodem Connection. Winmodems are special integrated low-end modems\n" "that require additional software to work compared to Normal modems. Some of\n" "those modems actually work under Mandrake Linux, some others do not. You\n" "can consult the list of supported modems at LinModems.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" "Διαδίκτυο\n" " Διαδίκτυο Επόμενο\n" " Linux\n" "\n" "\n" " Άκυρο\n" "\n" " Πότε\n" "\n" " απλό\n" "\n" "\n" " εξ' ορισμού\n" " Διαδίκτυο\n" "\n" " Διαδίκτυο\n" "\n" "." #: help.pm:197 #, c-format msgid "Use auto detection" msgstr "Χρήση αυτόματης ανίχνευσης" #: help.pm:200 #, fuzzy, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" "Εκτυπωτής Όχι Εκτυπωτής\n" "\n" " νέο\n" "." #: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:646 #: standalone/drakbackup:2688 standalone/drakbackup:2696 #: standalone/drakbackup:2704 standalone/drakbackup:2712 #, c-format msgid "Configure" msgstr "Ρύθμιση" #: help.pm:206 #, fuzzy, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξ' ορισμού\n" "\n" "\n" " εξυπηρετητής\n" "\n" " εξυπηρετητής\n" "!" #: help.pm:224 #, fuzzy, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same time zone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can be used by\n" "other machines on your local network as well." msgstr "" "Linux\n" "\n" "\n" " HardDrake Linux\n" "\n" " Τομέας Windows \n" "\n" "\n" " εξυπηρετητής Διαδίκτυο\n" " Διαδίκτυο\n" " εξυπηρετητής\n" " εξυπηρετητής." #: help.pm:235 install_steps_interactive.pm:834 #, c-format msgid "Hardware clock set to GMT" msgstr "Το ρολόι του υπολογιστή σας είναι ρυθμισμένο σε GMT (ώρα Γκρίνουιτς)" #: help.pm:235 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "Αυτόματος συγχρονισμός ώρας (χρήση NTP)" #: help.pm:238 #, fuzzy, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you are asked to choose the server that\n" "best suits your needs." msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξυπηρετητής\n" "." #: help.pm:249 #, fuzzy, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the situation where different servers are available for your card,\n" "with or without 3D acceleration, you are asked to choose the server that\n" "best suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor picture.\n" "\n" "\n" "\n" "Test\n" "\n" " Depending on your hardware, this entry might not appear.\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the auto-detected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "Σύστημα Linux\n" "\n" " Linux\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξυπηρετητής\n" "\n" "\n" "\n" "\n" " Οθόνη\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Ανάλυση\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Δοκιμή\n" "\n" "\n" " Ναι\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Επιλογές\n" "\n" "\n" "\n" " Όχι εξυπηρετητής\n" "." #: help.pm:304 #, fuzzy, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" "Οθόνη\n" "\n" "\n" "\n" "." #: help.pm:311 #, fuzzy, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor picture." msgstr "" "Ανάλυση\n" "\n" "\n" "\n" "\n" "." #: help.pm:319 #, fuzzy, c-format msgid "" "In the situation where different servers are available for your card, with\n" "or without 3D acceleration, you are asked to choose the server that best\n" "suits your needs." msgstr "" "\n" " εξυπηρετητής\n" "." #: help.pm:324 #, fuzzy, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" "\n" "\n" " Όχι\n" " εξυπηρετητής\n" "." #: help.pm:332 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n" "data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n" "FAT or NTFS partition. Resizing can be performed without the loss of any\n" "data, provided you have previously defragmented the Windows partition.\n" "Backing up your data is strongly recommended.. Using this option is\n" "recommended if you want to use both Mandrake Linux and Microsoft Windows on\n" "the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions'' section in the ``Starter Guide''." msgstr "" "\n" " Linux\n" "\n" "\n" " νέο\n" " Linux\n" "\n" "\n" "\n" "\n" " χρήστης\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " ανιχνεύθηκε\n" " Linux\n" "\n" " εξ' ορισμού\n" "\n" "\n" " Τομέας Windows Τομέας Windows \n" "\n" " Linux Διαγραφή\n" " Τομέας Windows \n" " Τομέας Windows Αλλαγή μεγέθους\n" "\n" " Τομέας Windows \n" "\n" " Linux Τομέας Windows \n" "\n" "\n" " Τομέας Windows \n" "\n" " Τομέας Windows νέο\n" "\n" " Διαγραφή\n" " νέο Linux\n" "\n" "\n" "\n" "\n" "\n" " Λίστα Αφαίρεσης Τομέας Windows \n" " Όλα\n" "\n" "\n" "\n" "\n" " Προσαρμοσμένο\n" "\n" "\n" " Ολοκληρώθηκε\n" "\n" "\n" "." #: help.pm:389 install_interactive.pm:95 #, c-format msgid "Use free space" msgstr "Χρήση ελεύθερου χώρου" #: help.pm:389 #, fuzzy, c-format msgid "Use existing partition" msgstr "Χρήση υπαρχουσών κατατμήσεων" #: help.pm:389 install_interactive.pm:137 #, c-format msgid "Use the free space on the Windows partition" msgstr "Χρήση του ελεύθερου χώρου στην κατάτμηση των Windows" #: help.pm:389 install_interactive.pm:211 #, c-format msgid "Erase entire disk" msgstr "Διαγραφή ολόκληρου του δίσκου" #: help.pm:389 #, fuzzy, c-format msgid "Remove Windows" msgstr "Αφαίρεση Windows(TM)" #: help.pm:389 install_interactive.pm:226 #, c-format msgid "Custom disk partitioning" msgstr "Προσαρμοσμένες κατατμήσεις δίσκου" #: help.pm:392 #, fuzzy, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. Don't forget to\n" "remove the installation media (CD-ROM or floppy). The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\": saves a list of the packages selected in this installation. To\n" "use this selection with another installation, insert the floppy and start\n" "the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<." msgstr "" "Linux\n" " Επόμενο\n" "\n" "\n" "\n" "\n" " Για Προχωρημένους\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Επαναφόρτωση\n" "\n" "\n" " Αυτόματο\n" "\n" "\n" "\n" "\n" "\n" " Αποθήκευση\n" "\n" "\n" "\n" "\n" " Linux\n" #: help.pm:418 #, fuzzy, c-format msgid "Generate auto-install floppy" msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης" #: help.pm:418 install_steps_interactive.pm:1320 #, c-format msgid "Replay" msgstr "Επαναφόρτωση" #: help.pm:418 install_steps_interactive.pm:1320 #, c-format msgid "Automated" msgstr "Αυτόματο" #: help.pm:418 install_steps_interactive.pm:1323 #, c-format msgid "Save packages selection" msgstr "Αποθήκευση επιλογής πακέτων" #: help.pm:421 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format the partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Επόμενο\n" "\n" " Προηγούμενο\n" " νέο Linux\n" "\n" " Για Προχωρημένους\n" "." #: help.pm:444 help.pm:1005 install_steps_gtk.pm:431 interactive.pm:404 #: interactive/newt.pm:307 printer/printerdrake.pm:2920 #: standalone/drakTermServ:371 standalone/drakbackup:4288 #: standalone/drakbackup:4316 standalone/drakbackup:4374 #: standalone/drakbackup:4400 standalone/drakbackup:4426 #: standalone/drakbackup:4483 standalone/drakbackup:4509 #: standalone/drakbackup:4539 standalone/drakbackup:4563 ugtk2.pm:507 #, c-format msgid "Previous" msgstr "Προηγούμενο" #: help.pm:447 #, fuzzy, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages will have been updated since the initial release. Bugs may have\n" "been fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one near to you. A package-selection tree will\n" "appear: review the selection, and press \"%s\" to retrieve and install the\n" "selected package(s), or \"%s\" to abort." msgstr "" "Linux\n" "\n" "\n" " Διαδίκτυο\n" " Ναι Διαδίκτυο Όχι\n" "\n" "\n" " Ναι\n" "\n" " Εγκατάσταση\n" " Άκυρο." #: help.pm:457 help.pm:602 install_steps_gtk.pm:430 #: install_steps_interactive.pm:148 standalone/drakbackup:4602 #, c-format msgid "Install" msgstr "Εγκατάσταση" #: help.pm:460 #, fuzzy, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option. You will\n" "be able to change that security level later with tool draksec from the\n" "Mandrake Control Center.\n" "\n" "The \"%s\" field can inform the system of the user on this computer who\n" "will be responsible for security. Security messages will be sent to that\n" "address." msgstr "" "επίπεδο\n" " επίπεδο\n" "\n" " Διαδίκτυο επίπεδο\n" "\n" "\n" "\n" "\n" " εξ' ορισμού." #: help.pm:472 #, fuzzy, c-format msgid "Security Administrator" msgstr "Διαχειριστής Ασφαλείας:" #: help.pm:475 #, fuzzy, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": un-checking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "\n" " Linux\n" " Linux\n" "\n" "\n" "\n" "\n" " IDE\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Άλλα\n" "\n" " Αποθήκευση\n" "\n" "\n" "\n" " Επαναφορά\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " μετά βίας\n" "\n" "\n" "\n" " Οδηγός\n" "\n" "\n" "\n" " Αναίρεση\n" "\n" "\n" "\n" "\n" "\n" " Ολοκληρώθηκε\n" "\n" "\n" " Πότε\n" "\n" "\n" "\n" " Ολοκληρώθηκε\n" "\n" " Πότε\n" "\n" " νέο\n" "\n" " Διαγραφή\n" "\n" "\n" "\n" "\n" "\n" "\n" " HFS\n" "\n" "\n" "\n" "." #: help.pm:544 #, fuzzy, c-format msgid "Removable media auto-mounting" msgstr "Αυτόματη σύνδεση αποσπώμενων μονάδων" #: help.pm:544 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "Αλλαγή σε κανονικό τρόπο λειτουργίας" #: help.pm:547 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one which you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "Περισσότερες των μία κατατμήσεις Windows βρέθηκαν στον δίσκο σας. Παρακαλώ \n" "επιλέξτε ποια θέλετε να συρρικνώσετε για να εγκαταστήσετε το Mandrake " "Linux.\n" "\n" "Κάθε κατάτμηση αναφέρεται ως: \"Όνομα Linux\", \"Όνομα Windows\"\n" "\"Χωρητικότητα\".\n" "\n" "Το όνομα Linux σημαίνει τα εξής: \"Τύπος δίσκου\",\"αριθμός δίσκου\",\n" "\"αριθμός κατάτμησης για παράδειγμα, \"hda1\").\n" "\n" "Ο \"Τύπος δίσκου\" είναι \"hd\" εάν πρόκειται για δίσκο IDE και \"sd\" \n" "για SCSI δίσκο.\n" "\n" "Ο \" αριθμός δίσκου\"είναι πάντα ένα γράμμα μετά το \"hd\" ή \"sd\". Για\n" "τους IDE δίσκους: \n" "\n" " * \"a\" είναι ο \"master δίσκος στον πρώτο ελεγκτή IDE\",\n" "\n" " * \"b\" είναι ο \"slave δίσκος στον πρώτο ελεγκτή IDE\",\n" "\n" " * \"c\" είναι ο \"master δίσκος στον δεύτερο ελεγκτή IDE\",\n" "\n" " * \"d\" είναι ο \"slave δίσκος στον δεύτερο ελεγκτή IDE\".\n" "\n" "Για δίσκους SCSI, \"a\" είναι ο πρώτος δίσκος, \"b\" είναι ο δεύτερος " "δίσκος\n" " κλπ...\n" "\n" "Το \"Όνομα Windows\" είναι το γράμμα της κατάτμησης όπως φαίνεται από τα\n" "Windows (ο πρώτος δίσκος ή κατάτμηση λέγεται \"C:\")." #: help.pm:578 #, fuzzy, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" "\"Χώρα\": ελέγξτε την επιλογή χώρας. Αν δεν είστε σε αυτή τη χώρα,\n" "κάντε κλικ στο πλήκτρο και επιλέξτε μια άλλη." #: help.pm:584 #, fuzzy, c-format msgid "" "This step is activated only if an existing GNU/Linux partition has been\n" "found on your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" "ενεργοποίηση τώρα Linux\n" "\n" "\n" " νέο\n" " Linux\n" "\n" " Εγκατάσταση\n" "\n" "\n" "\n" "\n" "\n" " Αναβάθμιση\n" " Linux\n" " χρήστης\n" "\n" "\n" " Αναβάθμιση Linux\n" " εκτελείται Αναβάθμιση\n" " Linux." #: help.pm:605 #, fuzzy, c-format msgid "" "Depending on the language you chose in section , DrakX will automatically\n" "select a particular type of keyboard configuration. Check that the\n" "selection suits you or choose another keyboard layout.\n" "\n" "Also, you may not have a keyboard that corresponds exactly to your\n" "language: for example, if you are an English-speaking Swiss native, you may\n" "have a Swiss keyboard. Or if you speak English and are located in Quebec,\n" "you may find yourself in the same situation where your native language and\n" "country-set keyboard do not match. In either case, this installation step\n" "will allow you to select an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" "εξ' ορισμού\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Άλλα\n" "\n" "\n" "\n" "\n" "." #: help.pm:624 #, fuzzy, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n" "cover all existing languages. Though full support for it in GNU/Linux is\n" "still under development. For that reason, Mandrake Linux will be using it\n" "or not depending on the user choices:\n" "\n" " * If you choose a languages with a strong legacy encoding (latin1\n" "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n" "iso-8859-2 languages), the legacy encoding will be used by default;\n" "\n" " * Other languages will use unicode by default;\n" "\n" " * If two or more languages are required, and those languages are not using\n" "the same encoding, then unicode will be used for the whole system;\n" "\n" " * Finally, unicode can also be forced for the system at user request by\n" "selecting option \"%s\" independently of which language(s) have been\n" "chosen.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will also be installed.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" "\n" "\n" "\n" "\n" " Για Προχωρημένους\n" "\n" "\n" " Ισπανία\n" " εξ' ορισμού Για Προχωρημένους\n" "\n" "\n" "\n" " Επόμενο\n" "\n" "\n" "\n" "\n" " χρήστης\n" " χρήστης." #: help.pm:660 #, c-format msgid "Espanol" msgstr "" #: help.pm:663 #, fuzzy, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "In case you have a 3 buttons mouse without wheel, you can choose the mouse\n" "that says \"%s\". DrakX will then configure your mouse so that you can\n" "simulate the wheel with it: to do so, press the middle button and move your\n" "mouse up and down.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" "\n" "\n" "\n" "\n" "\n" " σειριακό\n" "\n" "\n" "\n" "\n" " εξ' ορισμού\n" "\n" "\n" "\n" "\n" "\n" " Με ροδάκι ανιχνεύθηκε\n" "\n" "\n" " Επόμενο\n" " ενεργοποίηση τώρα\n" "\n" "\n" "." #: help.pm:691 #, fuzzy, c-format msgid "with Wheel emulation" msgstr "Προσομοίωση Κουμπιών" #: help.pm:694 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "Παρακαλώ επιλέξτε την κατάλληλη θύρα. Για παράδειγμα,\n" "η\"COM1\" στα Windows ονομάζεται \"ttyS0\" στο GNU/Linux." #: help.pm:698 #, fuzzy, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password you chose is too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the Internet and you absolutely trust everybody\n" "who uses your computer, you can choose to have \"%s\"." msgstr "" "Linux\n" " Root\n" "\n" "\n" "\n" "\n" "\n" " Linux\n" "\n" "\n" " σημαντικό\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " εξυπηρετητής Για Προχωρημένους\n" "\n" " LDAP NIS Τομέας Windows Τομέας\n" "\n" "\n" "\n" "\n" " Όχι Διαδίκτυο\n" "." #: help.pm:733 #, fuzzy, c-format msgid "authentication" msgstr "Πιστοποίηση" #. -PO: keep this short or else the buttons will not fit in the window #: help.pm:733 install_steps_interactive.pm:1154 #, c-format msgid "No password" msgstr "Χωρίς κωδικό πρόσβασης" #: help.pm:736 #, fuzzy, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer GRUB (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" " * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n" "management, notably for laptops. If you know your hardware supports it and\n" "you need it, check this box.\n" "\n" " * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n" "instabilities, machine freeze, ...) you should try disabling APIC by\n" "checking this box.\n" "\n" "!! Be aware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" "\n" "\n" " Χρήση προγράμματος εκκίνησης\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Root συσκευή εξ' ορισμού\n" "\n" "\n" "\n" " εξ' ορισμού\n" " χρήστης\n" " εξ' ορισμού\n" "\n" "\n" " Παράλειψη Linux\n" "\n" "\n" " Για Προχωρημένους\n" " χρήστης." #: help.pm:768 #, fuzzy, c-format msgid "GRUB" msgstr "GB" #: help.pm:768 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: help.pm:768 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: help.pm:768 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: help.pm:768 #, fuzzy, c-format msgid "Delay before booting the default image" msgstr "Καθυστέρηση πριν την εκκίνηση" #: help.pm:768 #, c-format msgid "Force no APIC" msgstr "" #: help.pm:771 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "\n" "\n" "\n" "\n" "\n" " Προσθήκη νέο\n" " Τροποποίηση Λίστα Αφαίρεσης Εντάξει\n" "\n" "\n" "\n" " Διαγραφή\n" "\n" "\n" "!" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #: standalone/drakbackup:1843 standalone/drakfont:586 standalone/drakfont:649 #: standalone/drakvpn:329 standalone/drakvpn:690 #, c-format msgid "Add" msgstr "Προσθήκη" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #, c-format msgid "Modify" msgstr "Τροποποίηση" #: help.pm:784 interactive.pm:295 interactive/gtk.pm:480 #: standalone/drakvpn:329 standalone/drakvpn:690 #, c-format msgid "Remove" msgstr "Αφαίρεσης" #: help.pm:787 #, c-format msgid "" "LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or any\n" "other OS installed on your machine.\n" "\n" " * if a GRUB or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n" "won't install any bootloader. Use it only if you know what you are doing." msgstr "" #: help.pm:803 #, fuzzy, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing systems\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it is compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" "Άλλο\n" " Linux\n" "\n" "\n" "\n" "\n" "\n" " απλό\n" "\n" " Linux\n" "\n" " CUPS Εκτύπωση Σύστημα\n" "\n" " απλό εξυπηρετητής\n" "\n" "\n" " εξυπηρετητής\n" " CUPS\n" "\n" "\n" "\n" "\n" " εκτελείται\n" "." #: help.pm:826 #, c-format msgid "pdq" msgstr "" #: help.pm:826 printer/cups.pm:99 printer/data.pm:82 #, c-format msgid "CUPS" msgstr "CUPS" #: help.pm:829 #, fuzzy, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" "IDE\n" " PCI\n" "\n" "\n" "\n" " PCI Ναι\n" " Όχι\n" "\n" " ανιχνεύθηκε\n" " Επόμενο Επόμενο\n" "\n" "\n" " PCI\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "." #: help.pm:847 #, fuzzy, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " \t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " \t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" " Linux\n" "\n" " Ετικέτα\n" "\n" "\n" " Εικόνα\n" "\n" "\n" " Root συσκευή Linux\n" "\n" "\n" " ενεργοποίηση\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Initrd\n" " συσκευή\n" "\n" "\n" " Initrd εξ' ορισμού\n" "\n" " εξ' ορισμού\n" "\n" "\n" "\n" " εξ' ορισμού\n" "\n" " ΧωρίςVideo\n" "\n" "\n" "\n" " Προεπιλεγμένο εξ' ορισμού Linux\n" "\n" "." #: help.pm:894 #, fuzzy, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Take care to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot\n" " Linux\n" " ανιχνεύθηκε\n" "\n" "\n" "\n" " Yaboot\n" "\n" " απλό\n" "\n" " Root\n" " Linux\n" "\n" "\n" "\n" "\n" " Linux\n" "\n" " Root\n" " Linux\n" " εξ' ορισμού\n" "\n" " Root\n" "\n" "\n" " Root\n" "\n" "\n" " Προεπιλεγμένο εξ' ορισμού\n" "." #: help.pm:926 #, fuzzy, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" "ανιχνεύθηκε\n" "\n" "\n" "." #: help.pm:929 help.pm:991 install_steps_interactive.pm:962 #: install_steps_interactive.pm:979 #, c-format msgid "Sound card" msgstr "Κάρτα ήχου" #: help.pm:932 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change it if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you wish to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: help.pm:991 install_steps_interactive.pm:110 #: install_steps_interactive.pm:899 standalone/keyboarddrake:23 #, c-format msgid "Keyboard" msgstr "Πληκτρολόγιο" #: help.pm:991 install_steps_interactive.pm:921 #, c-format msgid "Timezone" msgstr "Ωρολογιακή Ζώνη" #: help.pm:991 #, fuzzy, c-format msgid "Graphical Interface" msgstr "Γραφικό περιβάλλον" #: help.pm:991 install_steps_interactive.pm:995 #, c-format msgid "TV card" msgstr "Κάρτα TV" #: help.pm:991 #, fuzzy, c-format msgid "ISDN card" msgstr "Εσωτερική κάρτα ISDN" #: help.pm:991 install_steps_interactive.pm:1013 standalone/drakbackup:2394 #, c-format msgid "Network" msgstr "Δίκτυο" #: help.pm:991 install_steps_interactive.pm:1039 #, c-format msgid "Security Level" msgstr "Επίπεδο Ασφαλείας" #: help.pm:991 install_steps_interactive.pm:1053 #, c-format msgid "Firewall" msgstr "Τοίχος Προστασίας" #: help.pm:991 install_steps_interactive.pm:1067 #, c-format msgid "Bootloader" msgstr "Προγράμματος εκκίνησης" #: help.pm:991 install_steps_interactive.pm:1077 services.pm:195 #, c-format msgid "Services" msgstr "Υπηρεσίες" #: help.pm:994 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data on this drive will be lost\n" "and will not be recoverable!" msgstr "" "Επιλέξτε τον δίσκο που θέλετε να διαγράψετε για να εγκαταστήσετε \n" "την νέα κατάτμηση Mandrake Linux. ΠΡΟΣΟΧΗ: Όλα τα δεδομένα θα διαγραφούν\n" "και θα είναι αδύνατη η επαναφορά τους!" #: help.pm:999 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to quit this operation without losing data and partitions\n" "present on this hard drive." msgstr "" "Κάντε κλικ στο \"Επόμενο ->\" εάν θέλετε να διαγράψετε όλα τα δεδομένα\n" "τις κατατμήσεις που βρίσκονται στον σκληρό σας δίσκο. Προσοχή μετά\n" "που θα κλικ στο \"Επόμενο ->\"δεν θα μπορείτε να ανακτήσετε τα δεδομένα\n" "και τις κατατμήσεις που βρίσκονται στον δίσκο μαζί και τα Windows\n" " Επόμενο\n" "\n" "Κάντε κλικ στο \"<- Προηγούμενο\" για να τερματίσετε τη λειτουργία αυτή\n" "χωρίς να χάσετε τα δεδομένα και τις κατατμήσεις σας στο δίσκο." #: install2.pm:119 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" "Αδυναμία πρόσβασης των αρθρωμάτων που αντιστοιχούν στον πυρήνα σας (το " "αρχείο %s λείπει), γενικά αυτό σημαίνει ότι η δισκέτα εκκίνησης δεν είναι σε " "συγχρονισμό με το Μέσο εγκατάστασης ( παρακαλώ δημιουργήστε μια νέα δισκέτα " "εκκίνησης)" #: install2.pm:169 #, c-format msgid "You must also format %s" msgstr "Πρέπει επίσης να μορφοποιήσετε το %s" #: install_any.pm:413 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "Έχετε επιλέξει τους παρακάτω διακομιστές(η): %s\n" "\n" "\n" "Αυτοί οι διακομιστές είναι εξ ορισμού ενεργεί. Δεν έχουν κάποιο γνωστό " "πρόβλημα\n" "ασφάλειας, αλλά μπορούν να βρεθούν νέα. Σε αυτή την περίπτωση βεβαιωθείτε " "ότι\n" "έχετε εγκαταστήσει την τελευταία έκδοση το συντομότερο.\n" "\n" "\n" "Είστε βέβαιοι για την εγκατάσταση αυτών των διακομιστών;\n" #: install_any.pm:434 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" "Τα παρακάτω πακέτα θα αφαιρεθούν για να αναβαθμιστεί το σύστημά σας: %s\n" "\n" "\n" "Θέλετε πραγματικά να αφαιρέστε αυτά τα πακέτα;\n" #: install_any.pm:812 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Εισάγετε μια μορφοποιημένη δισκέτα FAT στον οδηγό %s" #: install_any.pm:816 #, c-format msgid "This floppy is not FAT formatted" msgstr "Αυτή η δισκέτα δεν έχει μορφοποίηση FAT" #: install_any.pm:828 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "Για να χρησιμοποιήσετε αυτήν την αποθηκευμένη επιλογή πακέτων, ξεκινήστε την " "εγκατάσταση με ``linux defcfg=floppy''" #: install_any.pm:856 partition_table.pm:845 #, c-format msgid "Error reading file %s" msgstr "Σφάλμα κατά την ανάγνωση του αρχείου %s" #: install_any.pm:973 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Προκλήθηκε σφάλμα - δεν βρέθηκαν συσκευές στις οποίες να είναι δυνατή η " "δημιουργία νέων συστημάτων αρχείων. Παρακαλώ ελέγξτε το υλικό σας για την " "αιτία αυτού του προβλήματος" #: install_gtk.pm:161 #, c-format msgid "System installation" msgstr "Εγκατάσταση" #: install_gtk.pm:164 #, c-format msgid "System configuration" msgstr "Ρύθμιση συστήματος" #: install_interactive.pm:22 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Ένα μέρος του υλικού σας χρειάζεται ``ιδιόκτητους'' οδηγούς για να " "λειτουργήσει.\n" "Μπορείτε να βρείτε σχετικές πληροφορίες στο: %s" #: install_interactive.pm:62 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Πρέπει να έχετε μια βασική κατάτμηση.\n" "Δημιουργήστε ή επιλέξτε μια κατάτμηση.\n" "Μετά ορίστε ως σημείο σύνδεσης το `/'" #: install_interactive.pm:67 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Δεν έχετε ορίσει κατάτμηση swap\n" "\n" "Να συνεχίσω;" #: install_interactive.pm:70 install_steps.pm:206 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Πρέπει να έχετε μια κατάτμηση FAT mounted στο /boot/efi" #: install_interactive.pm:97 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Δεν υπάρχει αρκετός ελεύθερος χώρος για δημιουργία νέων κατατμήσεων" #: install_interactive.pm:105 #, c-format msgid "Use existing partitions" msgstr "Χρήση υπαρχουσών κατατμήσεων" #: install_interactive.pm:107 #, c-format msgid "There is no existing partition to use" msgstr "Δεν υπάρχουν κατατμήσεις προς χρήση" #: install_interactive.pm:114 #, c-format msgid "Use the Windows partition for loopback" msgstr "Χρήση κατάτμησης Windows για loopback" #: install_interactive.pm:117 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Ποια κατάτμηση θέλετε να χρησιμοποιήσετε για το Linux4Win;" #: install_interactive.pm:119 #, c-format msgid "Choose the sizes" msgstr "Επιλέξτε τα μεγέθη" #: install_interactive.pm:120 #, c-format msgid "Root partition size in MB: " msgstr "Μέγεθος βασικής κατάτμησης συστήματος σε MB:" #: install_interactive.pm:121 #, c-format msgid "Swap partition size in MB: " msgstr "Μέγεθος κατάτμησης swap σε MB" #: install_interactive.pm:130 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Δεν υπάρχει κατάτμηση FAT για χρήση ως loopback (ή δεν υπάρχει αρκετός χώρος)" #: install_interactive.pm:139 #, c-format msgid "Which partition do you want to resize?" msgstr "Σε τι τύπο κατάτμησης θέλετε να αλλάξετε μέγεθος;" #: install_interactive.pm:153 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "Δεν μπορώ να αλλάξω μέγεθος στην κατάτμηση FAT, \n" "προκλήθηκε το παρακάτω λάθος: %s" #: install_interactive.pm:156 #, c-format msgid "Computing the size of the Windows partition" msgstr "Υπολογίζεται το μέγεθος της κατάτμησης των Windows" #: install_interactive.pm:163 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Η κατάτμηση των Windows είναι πολύ κατακερματισμένη, παρακαλώ τρέξτε πρώτα " "το ``defrag'' μέσα από τα Windows και ξεκινήστε ξανά την εγκατάσταση του " "Mandrake Linux " #: install_interactive.pm:164 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "ΠΡΟΣΟΧΗ!\n" "\n" "Το DrakX πρέπει τώρα να αλλάξει το μέγεθος της κατάτμησης των Windows.\n" "Η διαδικασία αυτή εμπεριέχει κινδύνους. Εάν δεν το έχετε κάνει ήδη,\n" "βγείτε από την εγκατάσταση ελέγξετε την κατάτμηση με το \n" "scandisk μέσα από τα Windows και κατά περίπτωση την αποκατακερμάτιση \n" "(defragment). Μετά ξεκινήστε ξανά την εγκατάσταση.\n" "Μετά θα πρέπει να κρατήσετε αντίγραφο ασφαλείας των δεδομένων σας.\n" "Εάν είστε σίγουροι, πατήστε Εντάξει." #: install_interactive.pm:176 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Τι χώρο θέλετε να κρατήσετε για τα windows στο" #: install_interactive.pm:177 #, c-format msgid "partition %s" msgstr "κατάτμηση %s" #: install_interactive.pm:186 #, c-format msgid "Resizing Windows partition" msgstr "Γίνεται αλλαγή τις κατάτμησης των Windows" #: install_interactive.pm:191 #, c-format msgid "FAT resizing failed: %s" msgstr "Αλλαγή μεγέθους FAT απέτυχε: %s" #: install_interactive.pm:206 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Δεν υπάρχει κατάμτηση FAT για αλλαγή μεγέθους (ή δεν υπάρχει αρκετός χώρος)" #: install_interactive.pm:211 #, c-format msgid "Remove Windows(TM)" msgstr "Αφαίρεση Windows(TM)" #: install_interactive.pm:213 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Έχετε περισσότερους από έναν δίσκους, σε ποιόν θέλετε να εγκαταστήσετε το " "Linux;" #: install_interactive.pm:217 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "Όλες οι υπάρχουσες κατατμήσεις και τα δεδομένα τους στον δίσκο %s θα χαθούν" #: install_interactive.pm:230 #, c-format msgid "Use fdisk" msgstr "Χρήση fdisk" #: install_interactive.pm:233 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Μπορείτε τώρα να κατατμήσετε τον δίσκο %s\n" "Όταν τελειώσετε, μην ξεχάσετε να αποθηκεύσετε πατώντας `w'" #: install_interactive.pm:269 #, c-format msgid "I can't find any room for installing" msgstr "Δεν μπορώ να βρω αρκετό χώρο για εγκατάσταση" #: install_interactive.pm:273 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Ο Οδηγός Κατάτμησης DrakX βρήκε τις παρακάτω λύσεις:" #: install_interactive.pm:279 #, c-format msgid "Partitioning failed: %s" msgstr "Η κατάτμηση απέτυχε: %s" #: install_interactive.pm:286 #, c-format msgid "Bringing up the network" msgstr "Εκκίνηση δικτύου" #: install_interactive.pm:291 #, c-format msgid "Bringing down the network" msgstr "Διακοπή λειτουργίας δικτύου" #: install_messages.pm:9 #, fuzzy, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "\n" "\n" " Linux\n" "\n" "\n" " Linux\n" "\n" "\n" " Άδεια\n" "\n" "\n" "\n" "\n" " Άδεια\n" " Άδεια\n" "\n" "\n" " Άδεια\n" " Άδεια Άδεια\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Linux\n" "\n" "\n" "\n" "\n" " Άδεια\n" "\n" "\n" " Γενικά\n" "\n" "\n" "\n" "\n" " Άδεια Τεκμηρίωση\n" "\n" "\n" "\n" "\n" " Θύρα\n" "\n" " Όλα\n" "\n" "\n" "\n" " Linux\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Άδεια Γαλλία\n" " Όλα\n" " Γαλλία\n" #: install_messages.pm:89 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #: install_messages.pm:96 #, fuzzy, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" " Προσοχή\n" "\n" "\n" " Άρνηση\n" "\n" "\n" "\n" "\n" " Άδεια\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " Μεταφορά\n" "\n" "\n" "\n" " Όλα\n" "\n" #: install_messages.pm:128 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Συγχαρητήρια, η εγκατάσταση ολοκληρώθηκε.\n" "Αφαιρέστε την δισκέτα ή το CD εκκίνησης και πατήστε return για " "επανεκκίνηση.\n" "\n" "\n" "Για πληροφορίες σχετικά με διορθώσεις αυτής της έκδοσης του Mandrake Linux,\n" "συμβουλευτείτε την σελίδα: \n" "\n" "\n" "%s\n" "\n" "\n" "Πληροφορίες σχετικά με τις ρυθμίσεις του συστήματός σας υπάρχουν στο " "σχετικό\n" "κεφάλαιο του επίσημου οδηγού χρήσης του Mandrake Linux." #: install_messages.pm:141 #, c-format msgid "http://www.mandrakelinux.com/en/100errata.php3" msgstr "http://www.mandrakelinux.com/en/100errata.php3" #: install_steps.pm:241 #, c-format msgid "Duplicate mount point %s" msgstr "Διπλό σημείο σύνδεσης %s" #: install_steps.pm:410 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Μερικά σημαντικά πακέτα δεν εγκαταστάθηκαν σωστά.\n" "Ο οδηγός CD-ROM ή το CD-ROM είναι ελαττωματικό.\n" "Ελέγξτε το CD-ROM σε ένα άλλο σύστημα χρησιμοποιώντας την εντολή \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" #: install_steps.pm:541 #, c-format msgid "No floppy drive available" msgstr "Δεν υπάρχει διαθέσιμος οδηγός δισκέτας" #: install_steps_auto_install.pm:76 install_steps_stdio.pm:27 #, c-format msgid "Entering step `%s'\n" msgstr "Βήμα `%s'\n" #: install_steps_gtk.pm:178 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "Το σύστημά σας δεν έχει αρκετούς πόρους. Μπορεί να αντιμετωπίσετε " "προβλήματα\n" "στην εγκατάσταση του Mandrake Linux. Εάν συμβεί αυτό, μπορείτε να δοκιμάσετε " "εγκατάσταση κειμένου.\n" "Πατήστε F1 κατά την εκκίνηση από CDROM, μετά γράψτε `text'." #: install_steps_gtk.pm:232 install_steps_interactive.pm:587 #, c-format msgid "Package Group Selection" msgstr "Επιλογή Ομάδων Πακέτων" #: install_steps_gtk.pm:292 install_steps_interactive.pm:519 #, c-format msgid "Total size: %d / %d MB" msgstr "Συνολικό μέγεθος: %d / %d MB" #: install_steps_gtk.pm:338 #, c-format msgid "Bad package" msgstr "Λάθος πακέτο" #: install_steps_gtk.pm:340 #, fuzzy, c-format msgid "Version: " msgstr "Έκδοση: %s\n" #: install_steps_gtk.pm:341 #, fuzzy, c-format msgid "Size: " msgstr "Μέγεθος: %s" #: install_steps_gtk.pm:341 #, fuzzy, c-format msgid "%d KB\n" msgstr "Μέγεθος: %d KB\n" #: install_steps_gtk.pm:342 #, fuzzy, c-format msgid "Importance: " msgstr "Σπουδαιότητα: %s\n" #: install_steps_gtk.pm:375 #, c-format msgid "You can't select/unselect this package" msgstr "Δεν μπορείτε να επιλέξετε/αποεπιλέξετε αυτό το πακέτο" #: install_steps_gtk.pm:379 #, fuzzy, c-format msgid "due to missing %s" msgstr "το kdesu λείπει" #: install_steps_gtk.pm:380 #, c-format msgid "due to unsatisfied %s" msgstr "" #: install_steps_gtk.pm:381 #, c-format msgid "trying to promote %s" msgstr "" #: install_steps_gtk.pm:382 #, c-format msgid "in order to keep %s" msgstr "" #: install_steps_gtk.pm:387 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Δεν μπορείτε να επιλέξετε αυτό το πακέτο διότι δεν υπάρχει αρκετός χώρος" #: install_steps_gtk.pm:390 #, c-format msgid "The following packages are going to be installed" msgstr "Θα εγκατασταθούν τα παρακάτω πακέτα" #: install_steps_gtk.pm:391 #, c-format msgid "The following packages are going to be removed" msgstr "Θα αφαιρεθούν τα παρακάτω πακέτα " #: install_steps_gtk.pm:415 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Αυτό είναι απαιτούμενο πακέτο, δεν μπορεί να αποεπιλεγεί" #: install_steps_gtk.pm:417 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Δεν μπορείτε να αποεπιλέξετε αυτό το πακέτο. Είναι ήδη εγκατεστημένο" #: install_steps_gtk.pm:420 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Αυτό το πακέτο πρέπει να αναβαθμιστεί\n" "Είστε σίγουρος ότι θέλετε να το αποεπιλέξετε;" #: install_steps_gtk.pm:423 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Δεν μπορείτε να αποεπιλέξετε αυτό το πακέτο. Πρέπει να αναβαθμιστεί" #: install_steps_gtk.pm:428 #, c-format msgid "Show automatically selected packages" msgstr "Αυτόματη προβολή επιλεγμένων πακέτων" #: install_steps_gtk.pm:433 #, c-format msgid "Load/Save on floppy" msgstr "Φόρτωση/Αποθήκευση σε δισκέτα" #: install_steps_gtk.pm:434 #, c-format msgid "Updating package selection" msgstr "Ανανέωση επιλεγμένων πακέτων" #: install_steps_gtk.pm:439 #, c-format msgid "Minimal install" msgstr "Ελάχιστη Εγκατάσταση" #: install_steps_gtk.pm:453 install_steps_interactive.pm:427 #, c-format msgid "Choose the packages you want to install" msgstr "Επιλέξτε τα πακέτα που θέλετε να εγκαταστήσετε" #: install_steps_gtk.pm:469 install_steps_interactive.pm:673 #, c-format msgid "Installing" msgstr "Εγκατάσταση" #: install_steps_gtk.pm:475 #, c-format msgid "No details" msgstr "Χωρίς λεπτομέρειες" #: install_steps_gtk.pm:476 #, c-format msgid "Estimating" msgstr "Εκτίμηση" #: install_steps_gtk.pm:482 #, c-format msgid "Time remaining " msgstr "Εναπομένων χρόνος " #: install_steps_gtk.pm:494 #, c-format msgid "Please wait, preparing installation..." msgstr "Παρακαλώ περιμένετε, προετοιμασία εγκατάστασης..." #: install_steps_gtk.pm:555 #, c-format msgid "%d packages" msgstr "%d πακέτα" #: install_steps_gtk.pm:560 #, c-format msgid "Installing package %s" msgstr "Εγκατάσταση πακέτου %s" #: install_steps_gtk.pm:596 install_steps_interactive.pm:88 #: install_steps_interactive.pm:697 #, c-format msgid "Refuse" msgstr "Άρνηση" #: install_steps_gtk.pm:597 install_steps_interactive.pm:698 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Αλλαγή Cd-Rom!\n" "\n" "Παρακαλώ εισάγετε το Cd-Rom με όνομα \"%s\" στον οδηγό σας και πατήστε " "Εντάξει.\n" "Εάν δεν το έχετε, πατήστε Ακύρωση για αποφυγή εγκατάστασης από αυτό το CdRom." #: install_steps_gtk.pm:612 install_steps_interactive.pm:710 #, c-format msgid "There was an error ordering packages:" msgstr "Προκλήθηκε σφάλμα κατά την ταξινόμηση των πακέτων:" #: install_steps_gtk.pm:612 install_steps_gtk.pm:616 #: install_steps_interactive.pm:710 install_steps_interactive.pm:714 #, c-format msgid "Go on anyway?" msgstr "Να συνεχίσω;" #: install_steps_gtk.pm:616 install_steps_interactive.pm:714 #, c-format msgid "There was an error installing packages:" msgstr "Προκλήθηκε σφάλμα κατά την εγκατάσταση των πακέτων:" #: install_steps_gtk.pm:656 install_steps_interactive.pm:881 #: install_steps_interactive.pm:1029 #, c-format msgid "not configured" msgstr "δεν ρυθμίστηκε" #: install_steps_interactive.pm:81 #, fuzzy, c-format msgid "Do you want to recover your system?" msgstr "Θέλετε να χρησιμοποιήσετε το aboot;" #: install_steps_interactive.pm:82 #, c-format msgid "License agreement" msgstr "Άδεια χρήσης" #: install_steps_interactive.pm:111 #, c-format msgid "Please choose your keyboard layout." msgstr "Παρακαλώ επιλέξτε την διάταξη πληκτρολογίου." #: install_steps_interactive.pm:113 #, c-format msgid "Here is the full list of keyboards available" msgstr "Αυτή είναι η πλήρης λίστα των διαθέσιμων πληκτρολογίων" #: install_steps_interactive.pm:143 #, c-format msgid "Install/Upgrade" msgstr "Εγκατάσταση/Αναβάθμιση" #: install_steps_interactive.pm:144 #, c-format msgid "Is this an install or an upgrade?" msgstr "Πρόκειται για εγκατάσταση ή για αναβάθμιση;" #: install_steps_interactive.pm:150 #, c-format msgid "Upgrade %s" msgstr "Αναβάθμιση %s" #: install_steps_interactive.pm:160 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "Κλειδί κρυπτογράφησης" #: install_steps_interactive.pm:177 #, c-format msgid "Please choose your type of mouse." msgstr "Παρακαλώ επιλέξτε τύπο ποντικιού." #: install_steps_interactive.pm:186 standalone/mousedrake:46 #, c-format msgid "Mouse Port" msgstr "Θύρα ποντικιού" #: install_steps_interactive.pm:187 standalone/mousedrake:47 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "" "Παρακαλώ επιλέξτε σειριακή θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας." #: install_steps_interactive.pm:197 #, c-format msgid "Buttons emulation" msgstr "Προσομοίωση Κουμπιών" #: install_steps_interactive.pm:199 #, c-format msgid "Button 2 Emulation" msgstr "Προσομοίωση 2 Κουμπιών" #: install_steps_interactive.pm:200 #, c-format msgid "Button 3 Emulation" msgstr "Προσομοίωση 3 Κουμπιών" #: install_steps_interactive.pm:221 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: install_steps_interactive.pm:221 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Ρύθμιση καρτών PCMCIA ..." #: install_steps_interactive.pm:228 #, c-format msgid "IDE" msgstr "IDE" #: install_steps_interactive.pm:228 #, c-format msgid "Configuring IDE" msgstr "Ρύθμιση IDE" #: install_steps_interactive.pm:248 network/tools.pm:197 #, c-format msgid "No partition available" msgstr "δεν υπάρχουν διαθέσιμες κατατμήσεις" #: install_steps_interactive.pm:251 #, c-format msgid "Scanning partitions to find mount points" msgstr "Ανάλυση κατατμήσεων για προσδιορισμό σημείων σύνδεσης." #: install_steps_interactive.pm:258 #, c-format msgid "Choose the mount points" msgstr "Επιλέξτε σημεία σύνδεσης" #: install_steps_interactive.pm:288 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "Δεν υπάρχει ελεύθερος χώρος για 1MB bootstrap! Η εγκατάσταση θα συνεχιστεί, " "αλλά για να ξεκινήσετε το σύστημά σας, θα χρειαστεί να δημιουργήσετε μια " "κατάτμηση bootstrap με το DiskDrake" #: install_steps_interactive.pm:325 #, c-format msgid "Choose the partitions you want to format" msgstr "Επιλέξτε κατατμήσεις προς μορφοποίηση" #: install_steps_interactive.pm:327 #, c-format msgid "Check bad blocks?" msgstr "Έλεγχος για χαλασμένα τμήματα;" #: install_steps_interactive.pm:359 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Απέτυχε ο έλεγχος του συστήματος αρχείων %s. Θέλετε να επισκευάσετε τα " "σφάλματα; (προσοχή, μπορεί να χάσετε δεδομένα)" #: install_steps_interactive.pm:362 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Δεν υπάρχει αρκετός χώρος swap για την ολοκλήρωση της εγκατάστασης, παρακαλώ " "προσθέστε" #: install_steps_interactive.pm:369 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Ψάχνω για διαθέσιμα πακέτα και δημιουργώ ξανά τη βάση δεδομένων rpm..." #: install_steps_interactive.pm:370 install_steps_interactive.pm:389 #, c-format msgid "Looking for available packages..." msgstr "Ψάχνω για διαθέσιμα πακέτα..." #: install_steps_interactive.pm:373 #, c-format msgid "Looking at packages already installed..." msgstr "Ψάχνω για ήδη εγκατεστημένα πακέτα..." #: install_steps_interactive.pm:377 #, c-format msgid "Finding packages to upgrade..." msgstr "Αναζήτηση πακέτων προς αναβάθμιση..." #: install_steps_interactive.pm:398 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Δεν επέμεινε αρκετός χώρος στο σύστημά σας για εγκατάσταση ή αναβάθμιση (%d " "> %d)" #: install_steps_interactive.pm:439 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "Παρακαλώ επιλέξτε τη φόρτωση ή αποθήκευση των επιλογής πακέτων στη δισκέτα.\n" "Η μορφοποίηση είναι η ίδια με τις δισκέτες αυτόματης εγκατάστασης." #: install_steps_interactive.pm:441 #, c-format msgid "Load from floppy" msgstr "Φόρτωση από δισκέτα" #: install_steps_interactive.pm:441 #, c-format msgid "Save on floppy" msgstr "Αποθήκευση σε δισκέτα" #: install_steps_interactive.pm:445 #, c-format msgid "Package selection" msgstr "Επιλογή πακέτων" #: install_steps_interactive.pm:445 #, c-format msgid "Loading from floppy" msgstr "Φορτώνεται από δισκέτα" #: install_steps_interactive.pm:450 #, c-format msgid "Insert a floppy containing package selection" msgstr "Εισάγετε δισκέτα που περιέχει την επιλογή πακέτων" #: install_steps_interactive.pm:533 #, c-format msgid "" "Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n" "tests, the 2.4 series kernel will be installed as the default to insure\n" "compliance under the \"LSB\" group selection." msgstr "" #: install_steps_interactive.pm:540 #, c-format msgid "Selected size is larger than available space" msgstr "Το επιλεγμένο μέγεθος είναι μεγαλύτερο από το διαθέσιμο χώρο" #: install_steps_interactive.pm:555 #, c-format msgid "Type of install" msgstr "Τύπος εγκατάστασης" #: install_steps_interactive.pm:556 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" "Δεν έχετε επιλέξει ομάδα πακέτων.\n" "Παρακαλώ επιλέξτε την ελάχιστη εγκατάσταση που θέλετε:" #: install_steps_interactive.pm:560 #, c-format msgid "With basic documentation (recommended!)" msgstr "Με την βασική τεκμηρίωση (συνιστάται!)" #: install_steps_interactive.pm:561 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "Πραγματικά ελάχιστη εγκατάσταση (ειδικά χωρίς urpmi)" #: install_steps_interactive.pm:604 standalone/drakxtv:53 #, c-format msgid "All" msgstr "Όλα" #: install_steps_interactive.pm:648 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Εάν έχετε όλα τα παρακάτω CDs, πατήστε Εντάξει.\n" "Εάν δεν έχετε κανένα από τα παρακάτω CDs, πατήστε Ακύρωση.\n" "Εάν δεν έχετε κάποια από αυτά, αποεπιλέξτε τα και πατήστε Εντάξει." #: install_steps_interactive.pm:653 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom ονόματι \"%s\"" #: install_steps_interactive.pm:673 #, c-format msgid "Preparing installation" msgstr "Προετοιμασία εγκατάστασης" #: install_steps_interactive.pm:682 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Εγκατάσταση πακέτου %s\n" "%d%%" #: install_steps_interactive.pm:728 #, c-format msgid "Post-install configuration" msgstr "Ρυθμίσεις μετά την εγκατάσταση" #: install_steps_interactive.pm:734 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Παρακαλώ εισάγετε τη δισκέτα Εκκίνησης στον οδηγό %s" #: install_steps_interactive.pm:740 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Παρακαλώ εισάγετε τη δισκέτα Αναβάθμισης Αρθρωμάτων στον οδηγό %s" #: install_steps_interactive.pm:761 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" "Τώρα έχετε τη δυνατότητα να εγκαταστήσετε πακέτα αναβάθμισης. Αυτά τα\n" "πακέτα έχουν αναβαθμιστεί μετά την έκδοση της διανομής. Μπορεί να περιέχουν\n" "διορθώσεις σφαλμάτων ή αναβαθμίσεις ασφάλειας.\n" "\n" "Για να κάνετε λήψη αυτών των πακέτων πρέπει να έχετε μια σύνδεση στο " "Διαδίκτυο\n" "που να λειτουργεί.\n" "\n" "Θέλετε να εγκαταστήσετε τις αναβαθμίσεις ;" # fuzzy #: install_steps_interactive.pm:782 #, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" "Σύνδεση με την τοποθεσία της Mandrake Linux για λήψη των διαθέσιμων τόπων " "λήψης..." #: install_steps_interactive.pm:786 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Επιλέξτε τόπο από τον οποίο θα γίνει η λήψη πακέτων" #: install_steps_interactive.pm:800 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Σύνδεση με τον τόπο για την λήψη των διαθέσιμων πακέτων..." #: install_steps_interactive.pm:804 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Αδυναμία fork: %s" #: install_steps_interactive.pm:804 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Θα θέλατε να ρυθμίσετε έναν εκτυπωτή;" #: install_steps_interactive.pm:830 standalone/drakclock:42 #, c-format msgid "Which is your timezone?" msgstr "Ποια είναι η ζώνη ώρας;" #: install_steps_interactive.pm:835 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Αυτόματος συγχρονισμός ώρας (χρήση NTP)" #: install_steps_interactive.pm:843 #, c-format msgid "NTP Server" msgstr "Εξυπηρετητής NTP" #: install_steps_interactive.pm:885 steps.pm:30 #, c-format msgid "Summary" msgstr "Περίληψη" #: install_steps_interactive.pm:898 install_steps_interactive.pm:906 #: install_steps_interactive.pm:920 install_steps_interactive.pm:927 #: install_steps_interactive.pm:1076 services.pm:135 #: standalone/drakbackup:1937 #, c-format msgid "System" msgstr "Σύστημα" #: install_steps_interactive.pm:934 install_steps_interactive.pm:961 #: install_steps_interactive.pm:978 install_steps_interactive.pm:994 #: install_steps_interactive.pm:1005 #, c-format msgid "Hardware" msgstr "Υλικό" #: install_steps_interactive.pm:940 install_steps_interactive.pm:949 #, c-format msgid "Remote CUPS server" msgstr "Απομακρυσμένος εξυπηρετητής CUPS" #: install_steps_interactive.pm:940 #, c-format msgid "No printer" msgstr "Κανένας εκτυπωτής" #: install_steps_interactive.pm:982 #, c-format msgid "Do you have an ISA sound card?" msgstr "Έχετε κάρτα ήχου ISA;" #: install_steps_interactive.pm:984 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" "Εκτελέστε \"sndconfig\" μετά την εγκατάσταση για την ρύθμιση της κάρτας" #: install_steps_interactive.pm:986 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" "Δεν βρέθηκε κάρτα ήχου. Δοκιμάστε το \"harddrake\" μετά την εγκατάσταση" #: install_steps_interactive.pm:1006 #, c-format msgid "Graphical interface" msgstr "Γραφικό περιβάλλον" #: install_steps_interactive.pm:1012 install_steps_interactive.pm:1027 #, c-format msgid "Network & Internet" msgstr "Δίκτυο & Διαδίκτυο" #: install_steps_interactive.pm:1028 #, fuzzy, c-format msgid "Proxies" msgstr "Προφίλ " #: install_steps_interactive.pm:1029 #, fuzzy, c-format msgid "configured" msgstr "επαναρύθμιση" #: install_steps_interactive.pm:1038 install_steps_interactive.pm:1052 #: steps.pm:20 #, c-format msgid "Security" msgstr "Ασφάλεια" #: install_steps_interactive.pm:1057 #, c-format msgid "activated" msgstr "ενεργοποιημένο" #: install_steps_interactive.pm:1057 #, c-format msgid "disabled" msgstr "απενεργοποιημένο" #: install_steps_interactive.pm:1066 #, c-format msgid "Boot" msgstr "Εκκίνηση" #. -PO: example: lilo-graphic on /dev/hda1 #: install_steps_interactive.pm:1070 #, fuzzy, c-format msgid "%s on %s" msgstr "%s (Θύρα %s)" #: install_steps_interactive.pm:1081 services.pm:177 #, c-format msgid "Services: %d activated for %d registered" msgstr "Υπηρεσίες: %d ενεργοποιημένες για %d εγγεγραμμένες" #: install_steps_interactive.pm:1091 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "Δεν έχετε ρυθμίσει το Χ. Είστε βέβαιοι ότι θέλετε να το κάνετε;" #: install_steps_interactive.pm:1149 #, c-format msgid "Set root password and network authentication methods" msgstr "" #: install_steps_interactive.pm:1150 #, c-format msgid "Set root password" msgstr "Κωδικός πρόσβασης root" #: install_steps_interactive.pm:1160 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Αυτός ο κωδικός πρόσβασης είναι πολύ απλός (πρέπει να έχει τουλάχιστον %d " "χαρακτήρες)" #: install_steps_interactive.pm:1165 network/netconnect.pm:492 #: standalone/drakauth:26 standalone/drakconnect:428 #: standalone/drakconnect:917 #, c-format msgid "Authentication" msgstr "Πιστοποίηση" #: install_steps_interactive.pm:1196 #, c-format msgid "Preparing bootloader..." msgstr "Προετοιμασία προγράμματος εκκίνησης..." #: install_steps_interactive.pm:1206 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" "Φαίνεται πως έχετε ένα Αρχαίο ή Άγνωστο\n" "μηχάνημα, ο yaboot bootloader δεν θα δουλέψει για σας.\n" "Η εγκατάσταση θα συνεχιστεί, αλλά\n" "θα χρειαστεί να χρησιμοποιήσετε το BootX για να ξεκινήσετε το μηχάνημά σας" #: install_steps_interactive.pm:1212 #, c-format msgid "Do you want to use aboot?" msgstr "Θέλετε να χρησιμοποιήσετε το aboot;" #: install_steps_interactive.pm:1215 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Σφάλμα κατά την εγκατάσταση του aboot, \n" "προσπάθεια βεβιασμένης εγκατάστασης, ακόμα και αν αυτό έχει σαν αποτέλεσμα " "την καταστροφή της πρώτης κατάτμησης;" #: install_steps_interactive.pm:1226 #, c-format msgid "Installing bootloader" msgstr "Πρόγραμμα εκκίνησης" #: install_steps_interactive.pm:1233 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" "Η εγκατάσταση του προγράμματος εκκίνησης απέτυχε. Προκλήθηκε το ακόλουθο " "σφάλμα:" #: install_steps_interactive.pm:1238 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Μπορεί να χρειαστεί να αλλάξετε την Open Firmware boot-συσκευή ώστε να\n" " ενεργοποιήσετε το πρόγραμμα εκκίνησης. Αν στην επανεκκίνηση δεν δείτε την " "προτροπή του πρόγραμμα εκκίνησης,\n" "πατήστε το Command-Option-O-F κατά την επανεκκίνηση και εισάγετε:\n" " setenv boot-device %s,\\\\:tbxi\n" " Μετά γράψτε: shut-down\n" "Στην επόμενη εκκίνηση θα πρέπει να δείτε την προτροπή του προγράμματος " "εκκίνησης ." #: install_steps_interactive.pm:1251 #, c-format msgid "" "In this security level, access to the files in the Windows partition is " "restricted to the administrator." msgstr "" #: install_steps_interactive.pm:1283 standalone/drakautoinst:75 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Εισάγετε άδεια δισκέτα στον οδηγό %s" #: install_steps_interactive.pm:1287 #, c-format msgid "Creating auto install floppy..." msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης..." #: install_steps_interactive.pm:1298 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Μερικά βήματα δεν ολοκληρώθηκαν.\n" "\n" "Θέλετε σίγουρα να εγκαταλείψετε τώρα;" #: install_steps_interactive.pm:1313 #, c-format msgid "Generate auto install floppy" msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης" #: install_steps_interactive.pm:1315 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "Η αυτόματη εγκατάσταση μπορεί να είναι πλήρως αυτόματη,\n" "σε αυτήν την περίπτωση θα αναλάβει το σκληρό δίσκο!!\n" "(αυτό αναφέρεται για περιπτώσεις εγκατάστασης σε άλλο υπολογιστή).\n" "\n" "Μπορεί να προτιμάτε να επαναλάβετε την εγκατάσταση.\n" #: install_steps_newt.pm:20 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Εγκατάσταση Mandrake Linux %s" #: install_steps_newt.pm:33 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / Αλλαγή πεδίου | επιλογή | επόμενη οθόνη" #: interactive.pm:170 #, c-format msgid "Choose a file" msgstr "Επιλέξτε ένα αρχείο" #: interactive.pm:372 #, c-format msgid "Basic" msgstr "Βασική" #: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:509 #, c-format msgid "Finish" msgstr "Τέλος" #: interactive/newt.pm:83 #, c-format msgid "Do" msgstr "Κάντο" #: interactive/stdio.pm:29 interactive/stdio.pm:148 #, c-format msgid "Bad choice, try again\n" msgstr "Κακή επιλογή, ξαναδοκιμάστε\n" #: interactive/stdio.pm:30 interactive/stdio.pm:149 #, c-format msgid "Your choice? (default %s) " msgstr "Η επιλογή σας; (εξ ορισμού %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Πεδία που θα πρέπει να συμπληρώσετε:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Η επιλογή σας; (0/1, εξ ορισμού %s)" #: interactive/stdio.pm:94 #, c-format msgid "Button `%s': %s" msgstr "Πλήκτρο `%s': %s" #: interactive/stdio.pm:95 #, c-format msgid "Do you want to click on this button?" msgstr "Θέλετε να κάνετε κλικ σε αυτό το κουμπί;" #: interactive/stdio.pm:104 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Η επιλογή σας; (εξ ορισμού `%s'%s) " #: interactive/stdio.pm:104 #, c-format msgid " enter `void' for void entry" msgstr "εισάγετε την λέξη `void' για κενή εισαγωγή" #: interactive/stdio.pm:122 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Υπάρχουν πολλά πράγματα από τα οποία μπορείτε να επιλέξετε (%s).\n" #: interactive/stdio.pm:125 #, fuzzy, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "επεξεργασία\n" "\n" " " #: interactive/stdio.pm:138 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Σημ.:μια ετικέτα άλλαξε:\n" "%s" #: interactive/stdio.pm:145 #, c-format msgid "Re-submit" msgstr "Εισάγετε ξανά" #: keyboard.pm:137 keyboard.pm:169 #, c-format msgid "Czech (QWERTZ)" msgstr "Τσέχικο (QWERTZ)" #: keyboard.pm:138 keyboard.pm:171 #, c-format msgid "German" msgstr "Γερμανικό" #: keyboard.pm:139 #, c-format msgid "Dvorak" msgstr "Dvorak" #: keyboard.pm:140 keyboard.pm:179 #, c-format msgid "Spanish" msgstr "Ισπανικό" #: keyboard.pm:141 keyboard.pm:180 #, c-format msgid "Finnish" msgstr "Φινλανδικό" #: keyboard.pm:142 keyboard.pm:181 #, c-format msgid "French" msgstr "Γαλλικό" #: keyboard.pm:143 keyboard.pm:217 #, c-format msgid "Norwegian" msgstr "Νορβηγικό" #: keyboard.pm:144 #, c-format msgid "Polish" msgstr "Πολωνικό" #: keyboard.pm:145 keyboard.pm:226 #, c-format msgid "Russian" msgstr "Ρωσικό" #: keyboard.pm:147 keyboard.pm:230 #, c-format msgid "Swedish" msgstr "Σουηδικό" #: keyboard.pm:148 keyboard.pm:249 #, c-format msgid "UK keyboard" msgstr "Μεγάλη Βρετανία (UK)" #: keyboard.pm:149 keyboard.pm:250 #, c-format msgid "US keyboard" msgstr "Η.Π.Α. (US)" #: keyboard.pm:151 #, c-format msgid "Albanian" msgstr "Αλβανικό" #: keyboard.pm:152 #, c-format msgid "Armenian (old)" msgstr "Αρμενικό (παλιό)" #: keyboard.pm:153 #, c-format msgid "Armenian (typewriter)" msgstr "Αρμενικό (γραφομηχανή)" #: keyboard.pm:154 #, c-format msgid "Armenian (phonetic)" msgstr "Αρμενικό (φωνητικό)" #: keyboard.pm:155 #, c-format msgid "Arabic" msgstr "Αραβικό" #: keyboard.pm:156 #, c-format msgid "Azerbaidjani (latin)" msgstr "Αζερμπαϊτζάν (Λατινικό)" #: keyboard.pm:158 #, c-format msgid "Belgian" msgstr "Βελγικό" #: keyboard.pm:159 #, c-format msgid "Bengali" msgstr "Βεγγαλικό" #: keyboard.pm:160 #, c-format msgid "Bulgarian (phonetic)" msgstr "Βουλγαρικό (φωνητικό)" #: keyboard.pm:161 #, c-format msgid "Bulgarian (BDS)" msgstr "Βουλγαρικό (BDS)" #: keyboard.pm:162 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Βραζιλιάνικο (ABNT-2)" #: keyboard.pm:165 #, c-format msgid "Bosnian" msgstr "Βοσνίας" #: keyboard.pm:166 #, c-format msgid "Belarusian" msgstr "Λευκορωσίας" #: keyboard.pm:167 #, c-format msgid "Swiss (German layout)" msgstr "Ελβετικό (Γερμανική διάταξη)" #: keyboard.pm:168 #, c-format msgid "Swiss (French layout)" msgstr "Ελβετικό (Γαλλική διάταξη)" #: keyboard.pm:170 #, c-format msgid "Czech (QWERTY)" msgstr "Τσέχικο (QWERTY)" #: keyboard.pm:172 #, c-format msgid "German (no dead keys)" msgstr "Γερμανικό (χωρίς νεκρά πλήκτρα)" #: keyboard.pm:173 #, c-format msgid "Devanagari" msgstr "Δεβαναγαρικό" #: keyboard.pm:174 #, c-format msgid "Danish" msgstr "Δανικό" #: keyboard.pm:175 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (ΗΠΑ)" #: keyboard.pm:176 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Νορβηγικό)" #: keyboard.pm:177 #, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (Σουηδικό)" #: keyboard.pm:178 #, c-format msgid "Estonian" msgstr "Εσθονικό" #: keyboard.pm:182 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Γεωργία (\"Ρώσικη\" διάταξη)" #: keyboard.pm:183 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Γεωργία (\"Λατινική\" διάταξη)" #: keyboard.pm:184 #, c-format msgid "Greek" msgstr "Ελληνικό" #: keyboard.pm:185 #, c-format msgid "Greek (polytonic)" msgstr "" #: keyboard.pm:186 #, c-format msgid "Gujarati" msgstr "Γκουτζαρατικό" #: keyboard.pm:187 #, c-format msgid "Gurmukhi" msgstr "Γκουρμούκι" #: keyboard.pm:188 #, c-format msgid "Hungarian" msgstr "Ουγγρικό" #: keyboard.pm:189 #, c-format msgid "Croatian" msgstr "Κροατικό" #: keyboard.pm:190 #, c-format msgid "Irish" msgstr "" #: keyboard.pm:191 #, c-format msgid "Israeli" msgstr "Ισραήλ" #: keyboard.pm:192 #, c-format msgid "Israeli (Phonetic)" msgstr "Ισραήλ (φωνητικό)" #: keyboard.pm:193 #, c-format msgid "Iranian" msgstr "Ιρανικό" #: keyboard.pm:194 #, c-format msgid "Icelandic" msgstr "Ισλανδικό" #: keyboard.pm:195 #, c-format msgid "Italian" msgstr "Ιταλικό" #: keyboard.pm:196 #, c-format msgid "Inuktitut" msgstr "" #: keyboard.pm:197 #, c-format msgid "Japanese 106 keys" msgstr "Ιαπωνικό 106 πλήκτρων" #: keyboard.pm:198 #, fuzzy, c-format msgid "Kannada" msgstr "Καναδάς" #: keyboard.pm:201 #, c-format msgid "Korean keyboard" msgstr "Κορεάτικο Πληκτρολόγιο" #: keyboard.pm:202 #, c-format msgid "Latin American" msgstr "Λατινικής Αμερικής" #: keyboard.pm:203 #, c-format msgid "Laotian" msgstr "" #: keyboard.pm:204 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Λιθουανικό AZERTY (παλιό)" #: keyboard.pm:206 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Λιθουανικό AZERTY (νέο)" #: keyboard.pm:207 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Λιθουανικό \"number row\" QWERTY" #: keyboard.pm:208 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Λιθουανικό \"φωνητικό\" QWERTY" #: keyboard.pm:209 #, c-format msgid "Latvian" msgstr "Λετονικό" #: keyboard.pm:210 #, c-format msgid "Malayalam" msgstr "Μαλαγιαλαμικό" #: keyboard.pm:211 #, c-format msgid "Macedonian" msgstr "Μακεδονικό Π.Γ Δ." #: keyboard.pm:212 #, fuzzy, c-format msgid "Myanmar (Burmese)" msgstr "Μιανμάρ" #: keyboard.pm:213 #, c-format msgid "Mongolian (cyrillic)" msgstr "Μογγολικό (Κυριλλική)" #: keyboard.pm:214 #, c-format msgid "Maltese (UK)" msgstr "" #: keyboard.pm:215 #, c-format msgid "Maltese (US)" msgstr "" #: keyboard.pm:216 #, c-format msgid "Dutch" msgstr "Ολλανδικό" #: keyboard.pm:218 #, fuzzy, c-format msgid "Oriya" msgstr "Συρία" #: keyboard.pm:219 #, c-format msgid "Polish (qwerty layout)" msgstr "Πολωνικό (διάταξη qwerty)" #: keyboard.pm:220 #, c-format msgid "Polish (qwertz layout)" msgstr "Πολωνικό (διάταξη qwertz)" #: keyboard.pm:221 #, c-format msgid "Portuguese" msgstr "Πορτογαλικό" #: keyboard.pm:222 #, c-format msgid "Canadian (Quebec)" msgstr "Καναδικό (Κεμπέκ)" #: keyboard.pm:224 #, c-format msgid "Romanian (qwertz)" msgstr "Ρουμανικό (qwertz)" #: keyboard.pm:225 #, c-format msgid "Romanian (qwerty)" msgstr "Ρουμανικό (qwerty)" #: keyboard.pm:227 #, c-format msgid "Russian (Phonetic)" msgstr "Ρωσικό (φωνητικό)" #: keyboard.pm:228 #, fuzzy, c-format msgid "Saami (norwegian)" msgstr "Dvorak (Νορβηγικό)" #: keyboard.pm:229 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: keyboard.pm:231 #, c-format msgid "Slovenian" msgstr "Σλοβενίας" #: keyboard.pm:232 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Σλοβακίας (QWERTZ)" #: keyboard.pm:233 #, c-format msgid "Slovakian (QWERTY)" msgstr "Σλοβακίας (QWERTY)" #: keyboard.pm:235 #, c-format msgid "Serbian (cyrillic)" msgstr "Σέρβικο (κυριλλικό)" #: keyboard.pm:236 #, fuzzy, c-format msgid "Syriac" msgstr "Συρία" #: keyboard.pm:237 #, fuzzy, c-format msgid "Syriac (phonetic)" msgstr "Αρμενικό (φωνητικό)" #: keyboard.pm:238 #, fuzzy, c-format msgid "Telugu" msgstr "Τοκελάου" #: keyboard.pm:240 #, c-format msgid "Tamil (ISCII-layout)" msgstr "Ταμιλικό (διάταξη ISCII)" #: keyboard.pm:241 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "Ταμιλικό (διάταξη γραφομηχανή)" #: keyboard.pm:242 #, c-format msgid "Thai keyboard" msgstr "Ταϊλανδέζικο" #: keyboard.pm:244 #, c-format msgid "Tajik keyboard" msgstr "" #: keyboard.pm:245 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Τουρκικό (παραδοσιακό \"F\" μοντέλο)" #: keyboard.pm:246 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Τουρκικό (μοντέρνο \"Q\" μοντέλο)" #: keyboard.pm:248 #, c-format msgid "Ukrainian" msgstr "Ουκρανικό" #: keyboard.pm:251 #, c-format msgid "US keyboard (international)" msgstr "US διεθνές" #: keyboard.pm:252 #, fuzzy, c-format msgid "Uzbek (cyrillic)" msgstr "Σέρβικο (κυριλλικό)" #: keyboard.pm:253 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Βιετνάμ \"numeric row\" QWERTY" #: keyboard.pm:254 #, c-format msgid "Yugoslavian (latin)" msgstr "Γιουγκοσλαβικό (λατινικό)" #: keyboard.pm:261 #, c-format msgid "Right Alt key" msgstr "Δεξιό πλήκτρο Alt" #: keyboard.pm:262 #, c-format msgid "Both Shift keys simultaneously" msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift" #: keyboard.pm:263 #, c-format msgid "Control and Shift keys simultaneously" msgstr "Ταυτόχρονα τα πλήκτρα Control και Shift" #: keyboard.pm:264 #, c-format msgid "CapsLock key" msgstr "Πλήκτρο Capslock" #: keyboard.pm:265 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "Ταυτόχρονα τα πλήκτρα Ctrl και Alt" #: keyboard.pm:266 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "Ταυτόχρονα τα πλήκτρα Alt και Shift" #: keyboard.pm:267 #, c-format msgid "\"Menu\" key" msgstr "Πλήκτρο \"Μενού\"" #: keyboard.pm:268 #, c-format msgid "Left \"Windows\" key" msgstr "Αριστερό πλήκτρο \"Windows\"" #: keyboard.pm:269 #, c-format msgid "Right \"Windows\" key" msgstr "Δεξιό πλήκτρο \"Windows\"" #: keyboard.pm:270 #, fuzzy, c-format msgid "Both Control keys simultaneously" msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift" #: keyboard.pm:271 #, fuzzy, c-format msgid "Both Alt keys simultaneously" msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift" #: keyboard.pm:272 #, fuzzy, c-format msgid "Left Shift key" msgstr "Αριστερό πλήκτρο \"Windows\"" #: keyboard.pm:273 #, fuzzy, c-format msgid "Right Shift key" msgstr "Δεξιό πλήκτρο Alt" #: keyboard.pm:274 #, fuzzy, c-format msgid "Left Alt key" msgstr "Δεξιό πλήκτρο Alt" #: keyboard.pm:275 #, fuzzy, c-format msgid "Left Control key" msgstr "Απομακρυσμένος Έλεγχος" #: keyboard.pm:276 #, fuzzy, c-format msgid "Right Control key" msgstr "Δεξιό πλήκτρο Alt" #: keyboard.pm:307 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" "Εδώ μπορείτε να επιλέξετε το πλήκτρο ή τον συνδυασμό\n" "πλήκτρων εναλλαγής των διατάξεων πληκτρολογίων\n" "(π.χ. Αγγλική ή Ελληνική)" #: keyboard.pm:312 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: lang.pm:144 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:160 #, c-format msgid "Afghanistan" msgstr "Αφγανιστάν" #: lang.pm:161 #, c-format msgid "Andorra" msgstr "Ανδόρα" #: lang.pm:162 #, c-format msgid "United Arab Emirates" msgstr "Ηνωμένα Αραβικά Εμιράτα" #: lang.pm:163 #, c-format msgid "Antigua and Barbuda" msgstr "Αντίγκουα και Μπαρμπούντα" #: lang.pm:164 #, c-format msgid "Anguilla" msgstr "Αγκίλα" #: lang.pm:165 #, c-format msgid "Albania" msgstr "Αλβανία" #: lang.pm:166 #, c-format msgid "Armenia" msgstr "Αρμενία" #: lang.pm:167 #, c-format msgid "Netherlands Antilles" msgstr "Ολλανδικές Αντίλλες" #: lang.pm:168 #, c-format msgid "Angola" msgstr "Αγκόλα" #: lang.pm:169 #, c-format msgid "Antarctica" msgstr "Ανταρκτική" #: lang.pm:170 standalone/drakxtv:51 #, c-format msgid "Argentina" msgstr "Αργεντινή" #: lang.pm:171 #, c-format msgid "American Samoa" msgstr "Αμερικανική Σαμόα" #: lang.pm:173 standalone/drakxtv:49 #, c-format msgid "Australia" msgstr "Αυστραλία" #: lang.pm:174 #, c-format msgid "Aruba" msgstr "Αρούμπα" #: lang.pm:175 #, c-format msgid "Azerbaijan" msgstr "Αζερμπαϊτζάν" #: lang.pm:176 #, c-format msgid "Bosnia and Herzegovina" msgstr "Βοσνία-Ερζεγοβίνη" #: lang.pm:177 #, c-format msgid "Barbados" msgstr "Μπαρμπάντος" #: lang.pm:178 #, c-format msgid "Bangladesh" msgstr "Μπανγκλαντές" #: lang.pm:180 #, c-format msgid "Burkina Faso" msgstr "Μπουρκίνα Φάσο" #: lang.pm:181 #, c-format msgid "Bulgaria" msgstr "Βουλγαρία" #: lang.pm:182 #, c-format msgid "Bahrain" msgstr "Μπαχρέιν" #: lang.pm:183 #, c-format msgid "Burundi" msgstr "Μπουρούντι" #: lang.pm:184 #, c-format msgid "Benin" msgstr "Μπενίν" #: lang.pm:185 #, c-format msgid "Bermuda" msgstr "Βερμούδες" #: lang.pm:186 #, c-format msgid "Brunei Darussalam" msgstr "Μπρουνέι Νταρουσαλάμ" #: lang.pm:187 #, c-format msgid "Bolivia" msgstr "Βολιβία" #: lang.pm:188 #, c-format msgid "Brazil" msgstr "Βραζιλία" #: lang.pm:189 #, c-format msgid "Bahamas" msgstr "Μπαχάμες" #: lang.pm:190 #, c-format msgid "Bhutan" msgstr "Μπουτάν" #: lang.pm:191 #, c-format msgid "Bouvet Island" msgstr "Νήσος Μπουβέ" #: lang.pm:192 #, c-format msgid "Botswana" msgstr "Μποτσουάνα" #: lang.pm:193 #, c-format msgid "Belarus" msgstr "Λευκορωσία" #: lang.pm:194 #, c-format msgid "Belize" msgstr "Μπελίζ" #: lang.pm:195 #, c-format msgid "Canada" msgstr "Καναδάς" #: lang.pm:196 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Νήσοι Κόκος (Κήλινγκ)" #: lang.pm:197 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: lang.pm:198 #, c-format msgid "Central African Republic" msgstr "Δημοκρατία Κεντρικής Αφρικής" #: lang.pm:199 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: lang.pm:200 #, c-format msgid "Switzerland" msgstr "Ελβετία" #: lang.pm:201 #, c-format msgid "Cote d'Ivoire" msgstr "Ακτή Ελεφαντοστού" #: lang.pm:202 #, c-format msgid "Cook Islands" msgstr "Νήσοι Κουκ" #: lang.pm:203 #, c-format msgid "Chile" msgstr "Χιλή" #: lang.pm:204 #, c-format msgid "Cameroon" msgstr "Καμερούν" #: lang.pm:205 #, c-format msgid "China" msgstr "Κίνα" #: lang.pm:206 #, c-format msgid "Colombia" msgstr "Κολομβία" #: lang.pm:208 #, c-format msgid "Cuba" msgstr "Κούβα" #: lang.pm:209 #, c-format msgid "Cape Verde" msgstr "Πράσινο Ακρωτήριο" #: lang.pm:210 #, c-format msgid "Christmas Island" msgstr "Νήσοι Χριστουγέννων" #: lang.pm:211 #, c-format msgid "Cyprus" msgstr "Κύπρος" #: lang.pm:214 #, c-format msgid "Djibouti" msgstr "Τζιμπουτί" #: lang.pm:215 #, c-format msgid "Denmark" msgstr "Δανία" #: lang.pm:216 #, c-format msgid "Dominica" msgstr "Ντομίνικα" #: lang.pm:217 #, c-format msgid "Dominican Republic" msgstr "Δομινικανή Δημοκρατία" #: lang.pm:218 #, c-format msgid "Algeria" msgstr "Αλγερία" #: lang.pm:219 #, c-format msgid "Ecuador" msgstr "Ισημερινός" #: lang.pm:220 #, c-format msgid "Estonia" msgstr "Εσθονία" #: lang.pm:221 #, c-format msgid "Egypt" msgstr "Αίγυπτος" #: lang.pm:222 #, c-format msgid "Western Sahara" msgstr "Δυτική Σαχάρα" #: lang.pm:223 #, c-format msgid "Eritrea" msgstr "Ερυθραία" #: lang.pm:224 network/adsl_consts.pm:193 network/adsl_consts.pm:200 #: network/adsl_consts.pm:209 network/adsl_consts.pm:220 #, c-format msgid "Spain" msgstr "Ισπανία" #: lang.pm:225 #, c-format msgid "Ethiopia" msgstr "Αιθιοπία" #: lang.pm:226 network/adsl_consts.pm:119 #, c-format msgid "Finland" msgstr "Φινλανδία" #: lang.pm:227 #, c-format msgid "Fiji" msgstr "Φίτζι" #: lang.pm:228 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Νήσοι Φώκλαντ (Μαλβίνες)" #: lang.pm:229 #, c-format msgid "Micronesia" msgstr "Μικρονησία" #: lang.pm:230 #, c-format msgid "Faroe Islands" msgstr "Νήσοι Φερόες" #: lang.pm:232 #, c-format msgid "Gabon" msgstr "Γκαμπόν" #: lang.pm:233 network/adsl_consts.pm:237 network/adsl_consts.pm:244 #: network/netconnect.pm:51 #, c-format msgid "United Kingdom" msgstr "Ηνωμένο Βασίλειο" #: lang.pm:234 #, c-format msgid "Grenada" msgstr "Γρενάδα" #: lang.pm:235 #, c-format msgid "Georgia" msgstr "Γεωργία" #: lang.pm:236 #, c-format msgid "French Guiana" msgstr "Γαλλική Γουιάνα" #: lang.pm:237 #, c-format msgid "Ghana" msgstr "Γκάνα" #: lang.pm:238 #, c-format msgid "Gibraltar" msgstr "Γιβραλτάρ" #: lang.pm:239 #, c-format msgid "Greenland" msgstr "Γροιλανδία" #: lang.pm:240 #, c-format msgid "Gambia" msgstr "Γκάμπια" #: lang.pm:241 #, c-format msgid "Guinea" msgstr "Γουινέα" #: lang.pm:242 #, c-format msgid "Guadeloupe" msgstr "Γουαδελούπη" #: lang.pm:243 #, c-format msgid "Equatorial Guinea" msgstr "Ισημερινή Γουϊνέα" #: lang.pm:245 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "Νότια Γεωργία και Νότια Νησιά Σάντουιτς" #: lang.pm:246 #, c-format msgid "Guatemala" msgstr "Γουατεμάλα" #: lang.pm:247 #, c-format msgid "Guam" msgstr "Γκουάμ" #: lang.pm:248 #, c-format msgid "Guinea-Bissau" msgstr "Γουϊνέα-Μπισάου" #: lang.pm:249 #, c-format msgid "Guyana" msgstr "Γουιάνα" #: lang.pm:250 #, fuzzy, c-format msgid "China (Hong Kong)" msgstr "Χονγκ Κονγκ" #: lang.pm:251 #, c-format msgid "Heard and McDonald Islands" msgstr "Νησί Χερντ και Νήσοι ΜακΝτόναλντ" #: lang.pm:252 #, c-format msgid "Honduras" msgstr "Ονδούρα" #: lang.pm:253 #, c-format msgid "Croatia" msgstr "Κροατία" #: lang.pm:254 #, c-format msgid "Haiti" msgstr "Αϊτή" #: lang.pm:255 network/adsl_consts.pm:144 #, c-format msgid "Hungary" msgstr "Ουγγαρία" #: lang.pm:256 #, c-format msgid "Indonesia" msgstr "Ινδονησία" #: lang.pm:257 standalone/drakxtv:48 #, c-format msgid "Ireland" msgstr "Ιρλανδία" #: lang.pm:258 #, c-format msgid "Israel" msgstr "Ισραήλ" #: lang.pm:259 #, c-format msgid "India" msgstr "Ινδία" #: lang.pm:260 #, c-format msgid "British Indian Ocean Territory" msgstr "Βρετανικά Εδάφη Ινδικού Ωκεανού" #: lang.pm:261 #, c-format msgid "Iraq" msgstr "Ιράκ" #: lang.pm:262 #, c-format msgid "Iran" msgstr "Ιράν" #: lang.pm:263 #, c-format msgid "Iceland" msgstr "Ισλανδία" #: lang.pm:265 #, c-format msgid "Jamaica" msgstr "Τζαμάικα" #: lang.pm:266 #, c-format msgid "Jordan" msgstr "Ιορδανία" #: lang.pm:267 #, c-format msgid "Japan" msgstr "Ιαπωνία" #: lang.pm:268 #, c-format msgid "Kenya" msgstr "Κένυα" #: lang.pm:269 #, c-format msgid "Kyrgyzstan" msgstr "Κιργιστάν" #: lang.pm:270 #, c-format msgid "Cambodia" msgstr "Καμπότζη" #: lang.pm:271 #, c-format msgid "Kiribati" msgstr "Κιριμπάτι" #: lang.pm:272 #, c-format msgid "Comoros" msgstr "Κομόρες" #: lang.pm:273 #, c-format msgid "Saint Kitts and Nevis" msgstr "Σαιντ Κιτς και Νέβις" #: lang.pm:274 #, c-format msgid "Korea (North)" msgstr "Κορέα (Βόρεια)" #: lang.pm:275 #, c-format msgid "Korea" msgstr "Κορέα" #: lang.pm:276 #, c-format msgid "Kuwait" msgstr "Κουβέιτ" #: lang.pm:277 #, c-format msgid "Cayman Islands" msgstr "Νήσοι Κέυμαν" #: lang.pm:278 #, c-format msgid "Kazakhstan" msgstr "Καζακστάν" #: lang.pm:279 #, c-format msgid "Laos" msgstr "Λάος" #: lang.pm:280 #, c-format msgid "Lebanon" msgstr "Λίβανος" #: lang.pm:281 #, c-format msgid "Saint Lucia" msgstr "Άγιος Λουκάς" #: lang.pm:282 #, c-format msgid "Liechtenstein" msgstr "Λιχτενστάιν" #: lang.pm:283 #, c-format msgid "Sri Lanka" msgstr "Σρι Λάνκα" #: lang.pm:284 #, c-format msgid "Liberia" msgstr "Λιβερία" #: lang.pm:285 #, c-format msgid "Lesotho" msgstr "Λεσότο" #: lang.pm:286 #, c-format msgid "Lithuania" msgstr "Λιθουανία" #: lang.pm:287 #, c-format msgid "Luxembourg" msgstr "Λουξεμβούργο" #: lang.pm:288 #, c-format msgid "Latvia" msgstr "Λεττονία" #: lang.pm:289 #, c-format msgid "Libya" msgstr "Λιβύη" #: lang.pm:290 #, c-format msgid "Morocco" msgstr "Μαρόκο" #: lang.pm:291 #, c-format msgid "Monaco" msgstr "Μονακό" #: lang.pm:292 #, c-format msgid "Moldova" msgstr "Μολδαβία" #: lang.pm:293 #, c-format msgid "Madagascar" msgstr "Μαδαγασκάρη" #: lang.pm:294 #, c-format msgid "Marshall Islands" msgstr "Νήσοι Μάρσαλ" #: lang.pm:295 #, c-format msgid "Macedonia" msgstr "Πρώην Γιουγκοσλαβική Δημοκρατία της Μακεδονίας" #: lang.pm:296 #, c-format msgid "Mali" msgstr "Μάλι" #: lang.pm:297 #, c-format msgid "Myanmar" msgstr "Μιανμάρ" #: lang.pm:298 #, c-format msgid "Mongolia" msgstr "Μογγολία" #: lang.pm:299 #, c-format msgid "Northern Mariana Islands" msgstr "Νήσοι Βορείων Μαριάννων" #: lang.pm:300 #, c-format msgid "Martinique" msgstr "Μαρτινίκα" #: lang.pm:301 #, c-format msgid "Mauritania" msgstr "Μαυριτανία" #: lang.pm:302 #, c-format msgid "Montserrat" msgstr "Μονσεράτ" #: lang.pm:303 #, c-format msgid "Malta" msgstr "Μάλτα" #: lang.pm:304 #, c-format msgid "Mauritius" msgstr "Μαυρίκιος" #: lang.pm:305 #, c-format msgid "Maldives" msgstr "Μαλδίβες" #: lang.pm:306 #, c-format msgid "Malawi" msgstr "Μαλάουι" #: lang.pm:307 #, c-format msgid "Mexico" msgstr "Μεξικό" #: lang.pm:308 #, c-format msgid "Malaysia" msgstr "Μαλαισία" #: lang.pm:309 #, c-format msgid "Mozambique" msgstr "Μοζαμβίκη" #: lang.pm:310 #, c-format msgid "Namibia" msgstr "Ναμίμπια" #: lang.pm:311 #, c-format msgid "New Caledonia" msgstr "Νέα Καληδονία" #: lang.pm:312 #, c-format msgid "Niger" msgstr "Νίγηρας" #: lang.pm:313 #, c-format msgid "Norfolk Island" msgstr "Νήσοι Νόρφολκ" #: lang.pm:314 #, c-format msgid "Nigeria" msgstr "Νιγηρία" #: lang.pm:315 #, c-format msgid "Nicaragua" msgstr "Νικαράγουα" #: lang.pm:318 #, c-format msgid "Nepal" msgstr "Νεπάλ" #: lang.pm:319 #, c-format msgid "Nauru" msgstr "Ναούρου" #: lang.pm:320 #, c-format msgid "Niue" msgstr "Νίουε" #: lang.pm:321 #, c-format msgid "New Zealand" msgstr "Νέα Ζηλανδία" #: lang.pm:322 #, c-format msgid "Oman" msgstr "Ομάν" #: lang.pm:323 #, c-format msgid "Panama" msgstr "Παναμάς" #: lang.pm:324 #, c-format msgid "Peru" msgstr "Περού" #: lang.pm:325 #, c-format msgid "French Polynesia" msgstr "Γαλλική Πολυνησία" #: lang.pm:326 #, c-format msgid "Papua New Guinea" msgstr "Παπούα-Νέα Γουϊνέα" #: lang.pm:327 #, c-format msgid "Philippines" msgstr "Φιλιππίνες" #: lang.pm:328 #, c-format msgid "Pakistan" msgstr "Πακιστάν" #: lang.pm:329 network/adsl_consts.pm:177 #, c-format msgid "Poland" msgstr "Πολωνία" #: lang.pm:330 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Σαιντ Πιερ και Μικελόν" #: lang.pm:331 #, c-format msgid "Pitcairn" msgstr "Νήσοι Πίτκαιρν" #: lang.pm:332 #, c-format msgid "Puerto Rico" msgstr "Πουέρτο Ρίκο" #: lang.pm:333 #, fuzzy, c-format msgid "Palestine" msgstr "Τμήμα Splash" #: lang.pm:334 network/adsl_consts.pm:187 #, c-format msgid "Portugal" msgstr "Πορτογαλία" #: lang.pm:335 #, c-format msgid "Paraguay" msgstr "Παραγουάη" #: lang.pm:336 #, c-format msgid "Palau" msgstr "Παλάου" #: lang.pm:337 #, c-format msgid "Qatar" msgstr "Κατάρ" #: lang.pm:338 #, c-format msgid "Reunion" msgstr "Ρεουνιόν" #: lang.pm:339 #, c-format msgid "Romania" msgstr "Ρουμανία" #: lang.pm:340 #, c-format msgid "Russia" msgstr "Ρωσία" #: lang.pm:341 #, c-format msgid "Rwanda" msgstr "Ρουάντα" #: lang.pm:342 #, c-format msgid "Saudi Arabia" msgstr "Σαουδική Αραβία" #: lang.pm:343 #, c-format msgid "Solomon Islands" msgstr "Νήσοι Σολομώντος" #: lang.pm:344 #, c-format msgid "Seychelles" msgstr "Σεϋχέλλες" #: lang.pm:345 #, c-format msgid "Sudan" msgstr "Σουδάν" #: lang.pm:347 #, c-format msgid "Singapore" msgstr "Σιγγαπούρη" #: lang.pm:348 #, c-format msgid "Saint Helena" msgstr "Νήσος Αγίας Ελένης" #: lang.pm:349 #, c-format msgid "Slovenia" msgstr "Σλοβενία" #: lang.pm:350 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Νήσοι Σβάλμπαρντ και Γιαν Μάγιεν" #: lang.pm:351 #, c-format msgid "Slovakia" msgstr "Σλοβακία" #: lang.pm:352 #, c-format msgid "Sierra Leone" msgstr "Σιέρρα Λεόνε" #: lang.pm:353 #, c-format msgid "San Marino" msgstr "Άγιος Μαρίνος" #: lang.pm:354 #, c-format msgid "Senegal" msgstr "Σενεγάλη" #: lang.pm:355 #, c-format msgid "Somalia" msgstr "Σομαλία" #: lang.pm:356 #, c-format msgid "Suriname" msgstr "Σουρινάμ" #: lang.pm:357 #, c-format msgid "Sao Tome and Principe" msgstr "Σάο Τόμε και Πρίντσιπε" #: lang.pm:358 #, c-format msgid "El Salvador" msgstr "Ελ Σαλβαδόρ" #: lang.pm:359 #, c-format msgid "Syria" msgstr "Συρία" #: lang.pm:360 #, c-format msgid "Swaziland" msgstr "Σουαζιλάνδη" #: lang.pm:361 #, c-format msgid "Turks and Caicos Islands" msgstr "Νήσοι Τούρκς και Καΐκος" #: lang.pm:362 #, c-format msgid "Chad" msgstr "Τσαντ" #: lang.pm:363 #, c-format msgid "French Southern Territories" msgstr "Γαλλικές Νότιες Περιοχές" #: lang.pm:364 #, c-format msgid "Togo" msgstr "Τόγκο" #: lang.pm:365 #, c-format msgid "Thailand" msgstr "Ταϊλάνδη" #: lang.pm:366 #, c-format msgid "Tajikistan" msgstr "Τατζικιστάν" #: lang.pm:367 #, c-format msgid "Tokelau" msgstr "Τοκελάου" #: lang.pm:368 #, c-format msgid "East Timor" msgstr "Ανατολικό Τιμόρ" #: lang.pm:369 #, c-format msgid "Turkmenistan" msgstr "Τουρκμενιστάν" #: lang.pm:370 #, c-format msgid "Tunisia" msgstr "Τυνησία" #: lang.pm:371 #, c-format msgid "Tonga" msgstr "Τόγκα" #: lang.pm:372 #, c-format msgid "Turkey" msgstr "Τουρκία" #: lang.pm:373 #, c-format msgid "Trinidad and Tobago" msgstr "Τρινιντάντ και Τομπάγκο" #: lang.pm:374 #, c-format msgid "Tuvalu" msgstr "Τουβαλού" #: lang.pm:375 #, c-format msgid "Taiwan" msgstr "Ταϊβάν" #: lang.pm:376 #, c-format msgid "Tanzania" msgstr "Τανζανία" #: lang.pm:377 #, c-format msgid "Ukraine" msgstr "Ουκρανία" #: lang.pm:378 #, c-format msgid "Uganda" msgstr "Ουγκάντα" #: lang.pm:379 #, c-format msgid "United States Minor Outlying Islands" msgstr "Μικρά απομονωμένα νησιά Ηνωμένων Πολιτειών" #: lang.pm:381 #, c-format msgid "Uruguay" msgstr "Ουρουγουάη" #: lang.pm:382 #, c-format msgid "Uzbekistan" msgstr "Ουζμπεκιστάν" #: lang.pm:383 #, fuzzy, c-format msgid "Vatican" msgstr "Λετονικό" #: lang.pm:384 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Άγιος Βικέντιος και Γρεναντίνες" #: lang.pm:385 #, c-format msgid "Venezuela" msgstr "Βενεζουέλα" #: lang.pm:386 #, c-format msgid "Virgin Islands (British)" msgstr "Παρθένοι Νήσοι(Βρετανικές)" #: lang.pm:387 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Παρθένοι Νήσοι(Αμερικανικές)" #: lang.pm:388 #, c-format msgid "Vietnam" msgstr "Βιετνάμ" #: lang.pm:389 #, c-format msgid "Vanuatu" msgstr "Βανουάτου" #: lang.pm:390 #, c-format msgid "Wallis and Futuna" msgstr "Νήσοι Γουάλις και Φουτούνα" #: lang.pm:391 #, c-format msgid "Samoa" msgstr "Σαμόα" #: lang.pm:392 #, c-format msgid "Yemen" msgstr "Υεμένη" #: lang.pm:393 #, c-format msgid "Mayotte" msgstr "Μαγιότ" #: lang.pm:394 #, c-format msgid "Serbia & Montenegro" msgstr "" #: lang.pm:395 standalone/drakxtv:50 #, c-format msgid "South Africa" msgstr "Νότιος Αφρική" #: lang.pm:396 #, c-format msgid "Zambia" msgstr "Ζάμπια" #: lang.pm:397 #, c-format msgid "Zimbabwe" msgstr "Ζιμπάμπουε" #: lang.pm:966 #, c-format msgid "Welcome to %s" msgstr "Καλώς ορίσατε στο %s" #: loopback.pm:32 #, c-format msgid "Circular mounts %s\n" msgstr "Κυκλικές συνδέσεις %s\n" #: lvm.pm:115 #, c-format msgid "Remove the logical volumes first\n" msgstr "Αφαιρέστε πρώτα τις λογικές μονάδες\n" #: modules/interactive.pm:21 standalone/drakconnect:962 #, c-format msgid "Parameters" msgstr "Παράμετροι" #: modules/interactive.pm:21 standalone/draksec:44 #, c-format msgid "NONE" msgstr "" #: modules/interactive.pm:22 #, fuzzy, c-format msgid "Module configuration" msgstr "Χειροκίνητη ρύθμιση" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Εδώ μπορείτε να ρυθμίσετε τις παραμέτρους του αρθρώματος." #: modules/interactive.pm:63 #, c-format msgid "Found %s %s interfaces" msgstr "Βρέθηκαν %s %s προσαρμογείς" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Έχετε άλλον;" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Έχετε κάποιον προσαρμογέα %s;" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Προβολή πληροφοριών υλικού" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:87 #, c-format msgid "Installing driver for %s card %s" msgstr "Εγκατάσταση οδηγού για %s κάρτα %s" #: modules/interactive.pm:87 #, c-format msgid "(module %s)" msgstr "(άρθρωμα %s)" #: modules/interactive.pm:98 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Μπορείτε τώρα να δώσετε τις παραμέτρους για το άρθρωμα %s.\n" "Σημειώστε ότι κάθε διεύθυνση πρέπει να εισάγεται με το πρόθεμα 0x όπως " "'0x123'" #: modules/interactive.pm:104 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Μπορείτε τώρα να δώσετε τις παραμέτρους για το άρθρωμα %s.\n" "Οι παράμετροι έχουν την μορφή ``όνομα=τιμή όνομα2=τιμή2 ...''.\n" "Για παράδειγμα, ``io=0x300 irq=7''" #: modules/interactive.pm:106 #, c-format msgid "Module options:" msgstr "Επιλογές αρθρώματος:" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:118 #, c-format msgid "Which %s driver should I try?" msgstr "Ποιόν οδηγό %s να δοκιμάσω;" #: modules/interactive.pm:127 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "Σε μερικές περιπτώσεις, ο οδηγός %s χρειάζεται επιπλέον παραμέτρους για\n" "να λειτουργήσει σωστά, παρ' όλο που συνήθως λειτουργεί και χωρίς αυτές.\n" "Θα θέλατε να δώσετε επιπλέον επιλογές ή να αφήσετε τον οδηγό να εξετάσει\n" "το υλικό σας για τις παραμέτρους που χρειάζεται; Η εξέταση αυτή ίσως\n" "προκαλέσει πάγωμα του συστήματος, αλλά δεν θα προκαλέσει βλάβη." #: modules/interactive.pm:131 #, c-format msgid "Autoprobe" msgstr "Αυτόματη εξέταση" #: modules/interactive.pm:131 #, c-format msgid "Specify options" msgstr "Προσδιορισμός παραμέτρων" #: modules/interactive.pm:143 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Η φόρτωση του αρθρώματος %s απέτυχε.\n" "Θέλετε να δοκιμάσετε ξανά με διαφορετικές παραμέτρους;" #: modules/parameters.pm:49 #, c-format msgid "a number" msgstr "ένας αριθμός" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated numbers" msgstr "%d αριθμοί χωρισμένοι με κόμμα" #: modules/parameters.pm:51 #, c-format msgid "%d comma separated strings" msgstr "" #: modules/parameters.pm:53 #, c-format msgid "comma separated numbers" msgstr "αριθμοί χωρισμένοι με κόμμα" #: modules/parameters.pm:53 #, c-format msgid "comma separated strings" msgstr "" #: mouse.pm:25 #, c-format msgid "Sun - Mouse" msgstr "Sun - Mouse" #: mouse.pm:31 security/level.pm:12 #, c-format msgid "Standard" msgstr "Τυπικό" #: mouse.pm:32 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: mouse.pm:33 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Γενικού τύπου ποντίκι PS2 με ροδάκι" #: mouse.pm:34 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: mouse.pm:36 network/modem.pm:23 network/modem.pm:37 network/modem.pm:42 #: network/modem.pm:73 network/netconnect.pm:481 network/netconnect.pm:482 #: network/netconnect.pm:483 network/netconnect.pm:503 #: network/netconnect.pm:508 network/netconnect.pm:520 #: network/netconnect.pm:525 network/netconnect.pm:541 #: network/netconnect.pm:543 #, fuzzy, c-format msgid "Automatic" msgstr "Αυτόματο IP" #: mouse.pm:39 mouse.pm:73 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: mouse.pm:40 mouse.pm:68 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: mouse.pm:41 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: mouse.pm:42 mouse.pm:52 #, c-format msgid "Microsoft Explorer" msgstr "Microsoft Explorer" #: mouse.pm:47 mouse.pm:79 #, c-format msgid "1 button" msgstr "1 πλήκτρου" #: mouse.pm:48 mouse.pm:57 #, c-format msgid "Generic 2 Button Mouse" msgstr "Γενικού τύπου με 2 πλήκτρα" #: mouse.pm:50 mouse.pm:59 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Γενικού τύπου με 3 πλήκτρα" #: mouse.pm:51 #, c-format msgid "Wheel" msgstr "Με ροδάκι" #: mouse.pm:55 #, c-format msgid "serial" msgstr "σειριακό" #: mouse.pm:58 #, c-format msgid "Generic 3 Button Mouse" msgstr "Γενικού τύπου με 3 πλήκτρα" #: mouse.pm:60 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: mouse.pm:61 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: mouse.pm:62 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: mouse.pm:63 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: mouse.pm:65 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: mouse.pm:66 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series" #: mouse.pm:67 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: mouse.pm:69 #, c-format msgid "MM Series" msgstr "MM Series" #: mouse.pm:70 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: mouse.pm:71 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (σειριακό, παλιός C7 τύπος)" #: mouse.pm:72 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (σειριακό, παλιός C7 τύπος)" #: mouse.pm:74 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse" #: mouse.pm:77 #, c-format msgid "busmouse" msgstr "busmouse" #: mouse.pm:80 #, c-format msgid "2 buttons" msgstr "Δύο πλήκτρων" #: mouse.pm:81 #, c-format msgid "3 buttons" msgstr "Τριών πλήκτρων" #: mouse.pm:82 #, fuzzy, c-format msgid "3 buttons with Wheel emulation" msgstr "Προσομοίωση Κουμπιών" #: mouse.pm:86 #, fuzzy, c-format msgid "Universal" msgstr "Εγκατάσταση" #: mouse.pm:88 #, c-format msgid "Any PS/2 & USB mice" msgstr "" #: mouse.pm:92 #, c-format msgid "none" msgstr "κανένα" #: mouse.pm:94 #, c-format msgid "No mouse" msgstr "Χωρίς ποντίκι" #: mouse.pm:515 #, c-format msgid "Please test the mouse" msgstr "Παρακαλώ δοκιμάστε το ποντίκι" #: mouse.pm:517 #, c-format msgid "To activate the mouse," msgstr "Για ενεργοποίηση ποντικιού" #: mouse.pm:518 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "ΚΙΝΗΣΤΕ ΤΟ ΡΟΔΑΚΙ!" #: network/adsl.pm:19 #, c-format msgid "use pppoe" msgstr "χρήση pppoe" #: network/adsl.pm:20 #, c-format msgid "use pptp" msgstr "χρήση pptp" #: network/adsl.pm:21 #, c-format msgid "use dhcp" msgstr "χρήση dhcp" #: network/adsl.pm:22 #, c-format msgid "Alcatel speedtouch usb" msgstr "Alcatel speedtouch usb" #: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24 #, fuzzy, c-format msgid " - detected" msgstr "ανιχνεύθηκε" #: network/adsl.pm:23 #, c-format msgid "Sagem (using pppoa) usb" msgstr "Sagem (με χρήση του pppoa) usb" #: network/adsl.pm:24 #, c-format msgid "Sagem (using dhcp) usb" msgstr "Sagem (με χρήση του dhcp) usb" #: network/adsl.pm:35 network/netconnect.pm:679 #, c-format msgid "Connect to the Internet" msgstr "Σύνδεση στο Διαδίκτυο" #: network/adsl.pm:36 network/netconnect.pm:680 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "Ο πιο κοινός τρόπος σύνδεσης adsl είναι pppoe.\n" "Ορισμένες συνδέσεις χρησιμοποιούν pptp, κάποιες λίγες dhcp.\n" "Εάν δεν ξέρετε, επιλέξτε 'χρήση pppoe'" #: network/adsl.pm:41 network/netconnect.pm:684 #, fuzzy, c-format msgid "ADSL connection type :" msgstr "Σύνδεση ADSL" #: network/drakfirewall.pm:12 #, c-format msgid "Web Server" msgstr "Εξυπηρετητής Ιστοσελίδων" #: network/drakfirewall.pm:17 #, c-format msgid "Domain Name Server" msgstr "Εξυπηρετητής Όνομα Τομέα" #: network/drakfirewall.pm:22 #, fuzzy, c-format msgid "SSH server" msgstr "Εξυπηρετητής SSH" #: network/drakfirewall.pm:27 #, fuzzy, c-format msgid "FTP server" msgstr "Εξυπηρετητής NTP" #: network/drakfirewall.pm:32 #, c-format msgid "Mail Server" msgstr "Εξυπηρετητής Ταχυδρομείου" #: network/drakfirewall.pm:37 #, c-format msgid "POP and IMAP Server" msgstr "Εξυπηρετητής POP και IMAP" #: network/drakfirewall.pm:42 #, fuzzy, c-format msgid "Telnet server" msgstr "εξυπηρετητής X" #: network/drakfirewall.pm:48 #, fuzzy, c-format msgid "Samba server" msgstr "Εξυπηρετητής Samba" #: network/drakfirewall.pm:54 #, fuzzy, c-format msgid "CUPS server" msgstr "Εξυπηρετητής DNS" #: network/drakfirewall.pm:60 #, c-format msgid "Echo request (ping)" msgstr "" #: network/drakfirewall.pm:125 #, c-format msgid "No network card" msgstr "δεν βρέθηκε κάρτα δικτύου" #: network/drakfirewall.pm:146 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" "ρύθμιση tinyfirewall\n" "\n" "Αυτό ρυθμίζει το προσωπικό σας firewall για αυτό το μηχάνημα Mandrake " "Linux.\n" "Για μια ισχυρή αφοσιωμένη λύση firewall, παρακαλώ κοιτάξτε στην\n" "ειδικευμένη MandrakeSecurity Firewall διανομή." #: network/drakfirewall.pm:152 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" "Ρυθμιστής drakfirewall\n" "\n" "Βεβαιωθείτε ότι έχετε ρυθμίσει το Δίκτυο/Πρόσβαση Διαδικτύου με τη χρήση του " "drakconnect πριν προχωρήσετε." #: network/drakfirewall.pm:169 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "Ποιες υπηρεσίες θέλετε να επιτρέπονται να συνδέονται στο Διαδίκτυο;" #: network/drakfirewall.pm:170 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" "Μπορείτε να εισάγετε διάφορες θήρες.\n" "Έγκυρα παραδείγματα είναι: 139/tcp 139/udp.\n" "Δείτε το /etc/services για πληροφορίες." #: network/drakfirewall.pm:176 #, fuzzy, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535.\n" "\n" "You can also give a range of ports (eg: 24300:24350/udp)" msgstr "" "Δόθηκε άκυρη θήρα: %s.\n" "Το σωστό φορμά είναι \"θύρα/tcp\" ή \"θύρα/udp\", \n" "όπου θήρα είναι είναι αριθμός μεταξύ 1 και 65535." #: network/drakfirewall.pm:186 #, c-format msgid "Everything (no firewall)" msgstr "Όλες (χωρίς τοίχος προστασίας)" #: network/drakfirewall.pm:188 #, c-format msgid "Other ports" msgstr "Άλλες θύρες" #: network/isdn.pm:127 network/isdn.pm:145 network/isdn.pm:157 #: network/isdn.pm:163 network/isdn.pm:173 network/isdn.pm:183 #: network/netconnect.pm:332 #, c-format msgid "ISDN Configuration" msgstr "Ρυθμίσεις ISDN" #: network/isdn.pm:127 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Επιλέξτε τον παροχέα σας\n" " Εάν δεν είναι στον κατάλογο, επιλέξτε Unlisted" #: network/isdn.pm:140 standalone/drakconnect:503 #, c-format msgid "European protocol (EDSS1)" msgstr "Ευρωπαϊκό Πρωτόκολλο (EDSS1)" #: network/isdn.pm:140 #, c-format msgid "European protocol" msgstr "Ευρωπαϊκό πρωτόκολλο" #: network/isdn.pm:142 standalone/drakconnect:504 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Πρωτόκολλο υπόλοιπου κόσμου\n" " χωρίς D-Channel (μισθωμένες γραμμές)" #: network/isdn.pm:142 #, c-format msgid "Protocol for the rest of the world" msgstr "Πρωτόκολλο υπόλοιπου κόσμου" #: network/isdn.pm:146 #, c-format msgid "Which protocol do you want to use?" msgstr "Ποιο πρωτόκολλο θέλετε να χρησιμοποιήσετε;" #: network/isdn.pm:157 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "Βρέθηκε μια διεπαφή \"%s\" θέλετε να τη χρησιμοποιήσετε ;" #: network/isdn.pm:164 #, c-format msgid "What kind of card do you have?" msgstr "Τι είδους κάρτας έχετε;" #: network/isdn.pm:165 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: network/isdn.pm:165 #, c-format msgid "PCI" msgstr "PCI" #: network/isdn.pm:165 #, fuzzy, c-format msgid "USB" msgstr "LSB" #: network/isdn.pm:165 #, c-format msgid "I don't know" msgstr "Δεν ξέρω" #: network/isdn.pm:174 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Εάν έχετε ISA κάρτα, οι τιμές στην επόμενη οθόνη θα πρέπει να είναι σωστές.\n" "\n" "Εάν έχετε PCMCIA κάρτα, πρέπει να ξέρετε το irq και το io της κάρτας σας.\n" #: network/isdn.pm:178 #, c-format msgid "Continue" msgstr "Συνέχεια" #: network/isdn.pm:178 #, c-format msgid "Abort" msgstr "Ακύρωση" #: network/isdn.pm:184 #, c-format msgid "Which of the following is your ISDN card?" msgstr "Ποια από τις παρακάτω κάρτες ISDN είναι η δικιά σας;" #: network/netconnect.pm:95 #, c-format msgid "Ad-hoc" msgstr "" #: network/netconnect.pm:96 #, fuzzy, c-format msgid "Managed" msgstr "Επιλέξτε γλώσσα" #: network/netconnect.pm:97 #, fuzzy, c-format msgid "Master" msgstr "Μαγιότ" #: network/netconnect.pm:98 #, fuzzy, c-format msgid "Repeater" msgstr "Επαναφορά" #: network/netconnect.pm:99 #, fuzzy, c-format msgid "Secondary" msgstr "δευτερεύουσα" #: network/netconnect.pm:100 #, fuzzy, c-format msgid "Auto" msgstr "Δημιουργός:" #: network/netconnect.pm:103 printer/printerdrake.pm:1118 #, c-format msgid "Manual configuration" msgstr "Χειροκίνητη ρύθμιση" #: network/netconnect.pm:104 #, fuzzy, c-format msgid "Automatic IP (BOOTP/DHCP)" msgstr "Αυτόματο IP" #: network/netconnect.pm:106 #, c-format msgid "Automatic IP (BOOTP/DHCP/Zeroconf)" msgstr "" #: network/netconnect.pm:156 #, fuzzy, c-format msgid "Alcatel speedtouch USB modem" msgstr "Alcatel speedtouch usb" #: network/netconnect.pm:157 #, fuzzy, c-format msgid "Sagem USB modem" msgstr "Κατάσταση συστήματος" #: network/netconnect.pm:158 #, c-format msgid "Bewan USB modem" msgstr "" #: network/netconnect.pm:159 #, c-format msgid "Bewan PCI modem" msgstr "" #: network/netconnect.pm:160 #, c-format msgid "ECI Hi-Focus modem" msgstr "" #: network/netconnect.pm:164 #, c-format msgid "Dynamic Host Configuration Protocol (DHCP)" msgstr "" #: network/netconnect.pm:165 #, fuzzy, c-format msgid "Manual TCP/IP configuration" msgstr "Χειροκίνητη ρύθμιση" #: network/netconnect.pm:166 #, c-format msgid "Point to Point Tunneling Protocol (PPTP)" msgstr "" #: network/netconnect.pm:167 #, c-format msgid "PPP over Ethernet (PPPoE)" msgstr "" #: network/netconnect.pm:168 #, c-format msgid "PPP over ATM (PPPoA)" msgstr "" #: network/netconnect.pm:172 #, fuzzy, c-format msgid "Bridged Ethernet LLC" msgstr "Κάρτα Ethernet" #: network/netconnect.pm:173 #, fuzzy, c-format msgid "Bridged Ethernet VC" msgstr "Κάρτα Ethernet" #: network/netconnect.pm:174 #, c-format msgid "Routed IP LLC" msgstr "" #: network/netconnect.pm:175 #, c-format msgid "Routed IP VC" msgstr "" #: network/netconnect.pm:176 #, c-format msgid "PPPOA LLC" msgstr "" #: network/netconnect.pm:177 #, c-format msgid "PPPOA VC" msgstr "" #: network/netconnect.pm:181 standalone/drakconnect:443 #: standalone/drakconnect:917 #, c-format msgid "Script-based" msgstr "Χρήση script" #: network/netconnect.pm:182 standalone/drakconnect:443 #: standalone/drakconnect:917 #, c-format msgid "PAP" msgstr "PAP" #: network/netconnect.pm:183 standalone/drakconnect:443 #: standalone/drakconnect:917 #, c-format msgid "Terminal-based" msgstr "Χρήση τερματικού" #: network/netconnect.pm:184 standalone/drakconnect:443 #: standalone/drakconnect:917 #, c-format msgid "CHAP" msgstr "CHAP" #: network/netconnect.pm:185 #, fuzzy, c-format msgid "PAP/CHAP" msgstr "CHAP" #: network/netconnect.pm:199 standalone/drakconnect:54 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "Ρυθμίσεις δικτύου" #: network/netconnect.pm:205 #, fuzzy, c-format msgid "(detected on port %s)" msgstr "ανιχνεύθηκε στην πόρτα %s" #. -PO: here, "(detected)" string will be appended to eg "ADSL connection" #: network/netconnect.pm:207 #, fuzzy, c-format msgid "(detected %s)" msgstr "ανιχνεύθηκε το %s" #: network/netconnect.pm:207 #, fuzzy, c-format msgid "(detected)" msgstr "ανιχνεύθηκε" #: network/netconnect.pm:209 #, fuzzy, c-format msgid "Modem connection" msgstr "Σύνδεση Winmodem" #: network/netconnect.pm:210 #, c-format msgid "ISDN connection" msgstr "Σύνδεση ISDN" #: network/netconnect.pm:211 #, c-format msgid "ADSL connection" msgstr "Σύνδεση ADSL" #: network/netconnect.pm:212 #, c-format msgid "Cable connection" msgstr "Καλωδιακή σύνδεση" #: network/netconnect.pm:213 #, c-format msgid "LAN connection" msgstr "Σύνδεση LAN" #: network/netconnect.pm:214 network/netconnect.pm:228 #, fuzzy, c-format msgid "Wireless connection" msgstr "Καλωδιακή σύνδεση" #: network/netconnect.pm:224 #, c-format msgid "Choose the connection you want to configure" msgstr "Επιλέξτε τη σύνδεση που θέλετε να ρυθμίσετε" #: network/netconnect.pm:241 #, fuzzy, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "\n" "\n" "\n" "Τώρα θα ρυθμίσουμε την %s σύνδεση.\n" "\n" "\n" "Πατήστε το OK για να ξεκινήσετε" #: network/netconnect.pm:249 network/netconnect.pm:710 #, c-format msgid "Connection Configuration" msgstr "Ρυθμίσεις σύνδεσης" #: network/netconnect.pm:250 network/netconnect.pm:711 #, c-format msgid "Please fill or check the field below" msgstr "Παρακαλώ ελέγξτε ή συμπληρώστε το παρακάτω πεδίο" #: network/netconnect.pm:256 standalone/drakconnect:494 #: standalone/drakconnect:899 #, c-format msgid "Card IRQ" msgstr "IRQ κάρτας" #: network/netconnect.pm:257 standalone/drakconnect:495 #: standalone/drakconnect:900 #, c-format msgid "Card mem (DMA)" msgstr "DMA κάρτας" #: network/netconnect.pm:258 standalone/drakconnect:496 #: standalone/drakconnect:901 #, c-format msgid "Card IO" msgstr "IO κάρτας" #: network/netconnect.pm:259 standalone/drakconnect:497 #: standalone/drakconnect:902 #, c-format msgid "Card IO_0" msgstr "IO_0 κάρτας" #: network/netconnect.pm:260 standalone/drakconnect:903 #, c-format msgid "Card IO_1" msgstr "IO_1 κάρτας" #: network/netconnect.pm:261 standalone/drakconnect:904 #, c-format msgid "Your personal phone number" msgstr "Προσωπικός αριθμός τηλεφώνου" #: network/netconnect.pm:262 network/netconnect.pm:714 #: standalone/drakconnect:905 #, c-format msgid "Provider name (ex provider.net)" msgstr "Όνομα παροχέα (π.χ. provider.net)" #: network/netconnect.pm:263 standalone/drakconnect:440 #: standalone/drakconnect:906 #, c-format msgid "Provider phone number" msgstr "Αριθμός τηλεφώνου παροχέα" #: network/netconnect.pm:264 #, fuzzy, c-format msgid "Provider DNS 1 (optional)" msgstr "dns 1 Παροχέα (προαιρετικό)" #: network/netconnect.pm:265 #, fuzzy, c-format msgid "Provider DNS 2 (optional)" msgstr "dns 2 Παροχέα (προαιρετικό)" #: network/netconnect.pm:266 standalone/drakconnect:396 #: standalone/drakconnect:462 standalone/drakconnect:911 #, c-format msgid "Dialing mode" msgstr "Τρόπος κλήσης" #: network/netconnect.pm:267 standalone/drakconnect:401 #: standalone/drakconnect:459 standalone/drakconnect:923 #, c-format msgid "Connection speed" msgstr "Ταχύτητα σύνδεσης" #: network/netconnect.pm:268 standalone/drakconnect:406 #: standalone/drakconnect:924 #, c-format msgid "Connection timeout (in sec)" msgstr "Χρόνος εκτός σύνδεσης (σε δεύτερα)" #: network/netconnect.pm:271 network/netconnect.pm:717 #: standalone/drakconnect:438 standalone/drakconnect:909 #, c-format msgid "Account Login (user name)" msgstr "Λογαριασμός Σύνδεσης (όνομα χρήστη)" #: network/netconnect.pm:272 network/netconnect.pm:718 #: standalone/drakconnect:439 standalone/drakconnect:910 #: standalone/drakconnect:944 #, c-format msgid "Account Password" msgstr "Κωδικός Πρόσβασης" #: network/netconnect.pm:300 #, c-format msgid "What kind is your ISDN connection?" msgstr "Τι είδους είναι η ISDN σύνδεσή σας;" #: network/netconnect.pm:301 #, c-format msgid "Internal ISDN card" msgstr "Εσωτερική κάρτα ISDN" #: network/netconnect.pm:301 #, c-format msgid "External ISDN modem" msgstr "Εξωτερικό ISDN modem" #: network/netconnect.pm:332 #, fuzzy, c-format msgid "Do you want to start a new configuration ?" msgstr "Θέλετε να δοκιμάσετε τις ρυθμίσεις;" #: network/netconnect.pm:335 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Εντόπισα μια ISDN κάρτα, αλλά δεν ξέρω τον τύπο της. Παρακαλώ επιλέξτε μια " "κάρτα PCI από την παρακάτω οθόνη." #: network/netconnect.pm:344 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Δεν βρέθηκε κάρτα ISDN. Παρακαλώ επιλέξτε μια από την παρακάτω οθόνη." #: network/netconnect.pm:353 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" "Το μόντεμ σας δεν υποστηρίζεται από το σύστημα.\n" "Ρίξτε μια ματιά στο http://www.linmodems.org" #: network/netconnect.pm:364 #, fuzzy, c-format msgid "Select the modem to configure:" msgstr "Επιλέξτε συσκευή δικτύου" #: network/netconnect.pm:403 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Σε ποια σειριακή πόρτα είναι συνδεδεμένο το μόντεμ σας;" #: network/netconnect.pm:427 #, fuzzy, c-format msgid "Select your provider:" msgstr "Επιλογή Spooler Εκτυπωτή" #: network/netconnect.pm:429 network/netconnect.pm:599 #, fuzzy, c-format msgid "Provider:" msgstr "Προφίλ: " #: network/netconnect.pm:481 network/netconnect.pm:482 #: network/netconnect.pm:483 network/netconnect.pm:508 #: network/netconnect.pm:525 network/netconnect.pm:541 #, fuzzy, c-format msgid "Manual" msgstr "χειροκίνητα" #: network/netconnect.pm:485 #, fuzzy, c-format msgid "Dialup: account options" msgstr "Επιλογές Σύνδεσης" #: network/netconnect.pm:488 standalone/drakconnect:913 #, c-format msgid "Connection name" msgstr "Όνομα σύνδεσης" #: network/netconnect.pm:489 standalone/drakconnect:914 #, c-format msgid "Phone number" msgstr "Αριθμός τηλεφώνου" #: network/netconnect.pm:490 standalone/drakconnect:915 #, c-format msgid "Login ID" msgstr "'Όνομα Χρήστη" #: network/netconnect.pm:505 network/netconnect.pm:538 #, fuzzy, c-format msgid "Dialup: IP parameters" msgstr "Παράμετροι" #: network/netconnect.pm:508 #, fuzzy, c-format msgid "IP parameters" msgstr "Παράμετροι" #: network/netconnect.pm:509 network/netconnect.pm:829 #: printer/printerdrake.pm:431 standalone/drakconnect:113 #: standalone/drakconnect:306 standalone/drakconnect:764 #, c-format msgid "IP address" msgstr "Διεύθυνση IP" #: network/netconnect.pm:510 #, fuzzy, c-format msgid "Subnet mask" msgstr "Μάσκα δικτύου" #: network/netconnect.pm:522 #, c-format msgid "Dialup: DNS parameters" msgstr "" #: network/netconnect.pm:525 #, fuzzy, c-format msgid "DNS" msgstr "NIS" #: network/netconnect.pm:526 standalone/drakconnect:918 #, c-format msgid "Domain name" msgstr "Όνομα Τομέα" #: network/netconnect.pm:527 network/netconnect.pm:715 #: standalone/drakconnect:919 #, c-format msgid "First DNS Server (optional)" msgstr "Πρώτος εξυπηρετητής DNS (προαιρετικό)" #: network/netconnect.pm:528 network/netconnect.pm:716 #: standalone/drakconnect:920 #, c-format msgid "Second DNS Server (optional)" msgstr "Δεύτερος εξυπηρετητής DNS (προαιρετικό)" #: network/netconnect.pm:529 #, fuzzy, c-format msgid "Set hostname from IP" msgstr "Δικτυακό όνομα εκτυπωτή ή IP" #: network/netconnect.pm:541 standalone/drakconnect:317 #: standalone/drakconnect:912 #, c-format msgid "Gateway" msgstr "Πύλη δικτύου" #: network/netconnect.pm:542 #, fuzzy, c-format msgid "Gateway IP address" msgstr "Διεύθυνση IP" #: network/netconnect.pm:567 #, fuzzy, c-format msgid "ADSL configuration" msgstr "Ρύθμιση LAN" #: network/netconnect.pm:567 network/netconnect.pm:746 #, fuzzy, c-format msgid "Select the network interface to configure:" msgstr "Επιλέξτε συσκευή δικτύου" #: network/netconnect.pm:568 network/netconnect.pm:748 network/shorewall.pm:77 #: standalone/drakconnect:602 standalone/drakgw:218 standalone/drakvpn:217 #, c-format msgid "Net Device" msgstr "Συσκευή Δικτύου" #: network/netconnect.pm:597 #, fuzzy, c-format msgid "Please choose your ADSL provider" msgstr "Παρακαλώ επιλέξτε την χώρα σας." #: network/netconnect.pm:616 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: network/netconnect.pm:620 network/netconnect.pm:625 #, fuzzy, c-format msgid "Use a floppy" msgstr "Αποθήκευση σε δισκέτα" #: network/netconnect.pm:620 network/netconnect.pm:629 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "Γίνεται αλλαγή τις κατάτμησης των Windows" #: network/netconnect.pm:620 network/netconnect.pm:633 #, c-format msgid "Do it later" msgstr "" #: network/netconnect.pm:640 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: network/netconnect.pm:647 #, c-format msgid "Firmware copy succeeded" msgstr "" #: network/netconnect.pm:662 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: network/netconnect.pm:719 #, c-format msgid "Virtual Path ID (VPI):" msgstr "" #: network/netconnect.pm:720 #, c-format msgid "Virtual Circuit ID (VCI):" msgstr "" #: network/netconnect.pm:721 #, fuzzy, c-format msgid "Encapsulation :" msgstr "Κλειδί κρυπτογράφησης" #: network/netconnect.pm:736 #, c-format msgid "" "The ECI Hi-Focus modem cannot be supported due to binary driver distribution " "problem.\n" "\n" "You can find a driver on http://eciadsl.flashtux.org/" msgstr "" #: network/netconnect.pm:753 #, fuzzy, c-format msgid "No wireless network adapter on your system!" msgstr "Δεν βρέθηκε προσαρμογέας δικτύου στο σύστημά σας!" #: network/netconnect.pm:754 standalone/drakgw:240 standalone/drakpxe:137 #, c-format msgid "No network adapter on your system!" msgstr "Δεν βρέθηκε προσαρμογέας δικτύου στο σύστημά σας!" #: network/netconnect.pm:766 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" "ΠΡΟΣΟΧΗ: Αυτή η συσκευή είναι ήδη ρυθμισμένη για να συνδέεται με το " "Διαδίκτυο.\n" "Απλά πατήστε OK για να κρατήσετε τις υπάρχουσες ρυθμίσεις.\n" "Αλλάζοντας τα παρακάτω πεδία θα αλλάξετε την υπάρχουσα ρύθμιση." #: network/netconnect.pm:784 #, fuzzy, c-format msgid "Zeroconf hostname resolution" msgstr "Δικτυακό Όνομα Zeroconf" #: network/netconnect.pm:785 network/netconnect.pm:816 #, fuzzy, c-format msgid "Configuring network device %s (driver %s)" msgstr "Ρύθμιση συσκευής δικτύου %s" #: network/netconnect.pm:786 #, c-format msgid "" "The following protocols can be used to configure an ethernet connection. " "Please choose the one you want to use" msgstr "" #: network/netconnect.pm:817 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Παρακαλώ εισάγετε τις IP ρυθμίσεις για αυτό το σύστημα.\n" "Κάθε στοιχείο πρέπει να εισαχθεί ως IP διεύθυνση με αριθμούς\n" "χωρισμένους με τελείες (παράδειγμα: 1.2.3.4)." #: network/netconnect.pm:824 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "Πρέπει να ορίστε τον δικτυακό όνομα ή την IP διεύθυνση.\n" #: network/netconnect.pm:825 #, fuzzy, c-format msgid "DHCP host name" msgstr "Όνομα συστήματος" #: network/netconnect.pm:830 standalone/drakconnect:311 #: standalone/drakconnect:765 standalone/drakgw:313 #, c-format msgid "Netmask" msgstr "Μάσκα δικτύου" #: network/netconnect.pm:832 standalone/drakconnect:389 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" "Αναζήτηση ταυτότητας της κάρτας δικτύου (χρήσιμο για φορητούς υπολογιστές)" #: network/netconnect.pm:833 standalone/drakconnect:390 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Ρυθμίσεις δικτύου" #: network/netconnect.pm:834 standalone/drakconnect:384 #, c-format msgid "Start at boot" msgstr "Στην εκκίνηση συστήματος" #: network/netconnect.pm:836 standalone/drakconnect:768 #, c-format msgid "DHCP client" msgstr "πελάτης DHCP" #: network/netconnect.pm:846 printer/printerdrake.pm:1349 #: standalone/drakconnect:569 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "Η IP διεύθυνση πρέπει να είναι σε μορφή 1.2.3.4" #: network/netconnect.pm:849 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: network/netconnect.pm:879 network/netconnect.pm:908 #, fuzzy, c-format msgid "Please enter the wireless parameters for this card:" msgstr "Παρακαλώ ορίστε τον δικτυακό όνομα ή την IP" #: network/netconnect.pm:882 standalone/drakconnect:355 #, fuzzy, c-format msgid "Operating Mode" msgstr "Για Προχωρημένους" #: network/netconnect.pm:884 standalone/drakconnect:356 #, c-format msgid "Network name (ESSID)" msgstr "" #: network/netconnect.pm:885 standalone/drakconnect:357 #, fuzzy, c-format msgid "Network ID" msgstr "Δίκτυο" #: network/netconnect.pm:886 standalone/drakconnect:358 #, c-format msgid "Operating frequency" msgstr "" #: network/netconnect.pm:887 standalone/drakconnect:359 #, c-format msgid "Sensitivity threshold" msgstr "" #: network/netconnect.pm:888 standalone/drakconnect:360 #, c-format msgid "Bitrate (in b/s)" msgstr "" #: network/netconnect.pm:894 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:898 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: network/netconnect.pm:911 standalone/drakconnect:371 #, c-format msgid "RTS/CTS" msgstr "" #: network/netconnect.pm:912 #, c-format msgid "" "RTS/CTS adds a handshake before each packet transmission to make sure that " "the\n" "channel is clear. This adds overhead, but increase performance in case of " "hidden\n" "nodes or large number of active nodes. This parameter sets the size of the\n" "smallest packet for which the node sends RTS, a value equal to the maximum\n" "packet size disable the scheme. You may also set this parameter to auto, " "fixed\n" "or off." msgstr "" #: network/netconnect.pm:919 standalone/drakconnect:372 #, fuzzy, c-format msgid "Fragmentation" msgstr "Σταθμός παιχνιδιών" #: network/netconnect.pm:920 standalone/drakconnect:373 #, c-format msgid "Iwconfig command extra arguments" msgstr "" #: network/netconnect.pm:921 #, c-format msgid "" "Here, one can configure some extra wireless parameters such as:\n" "ap, channel, commit, enc, power, retry, sens, txpower (nick is already set " "as the hostname).\n" "\n" "See iwpconfig(8) man page for further information." msgstr "" #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one #: network/netconnect.pm:928 standalone/drakconnect:374 #, c-format msgid "Iwspy command extra arguments" msgstr "" #: network/netconnect.pm:929 #, c-format msgid "" "Iwspy is used to set a list of addresses in a wireless network\n" "interface and to read back quality of link information for each of those.\n" "\n" "This information is the same as the one available in /proc/net/wireless :\n" "quality of the link, signal strength and noise level.\n" "\n" "See iwpspy(8) man page for further information." msgstr "" #: network/netconnect.pm:937 standalone/drakconnect:375 #, c-format msgid "Iwpriv command extra arguments" msgstr "" #: network/netconnect.pm:938 #, c-format msgid "" "Iwpriv enable to set up optionals (private) parameters of a wireless " "network\n" "interface.\n" "\n" "Iwpriv deals with parameters and setting specific to each driver (as opposed " "to\n" "iwconfig which deals with generic ones).\n" "\n" "In theory, the documentation of each device driver should indicate how to " "use\n" "those interface specific commands and their effect.\n" "\n" "See iwpriv(8) man page for further information." msgstr "" #: network/netconnect.pm:965 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Δεν βρέθηκε προσαρμογέας δικτύου Ethernet στο σύστημά σας.\n" "Δεν μπορώ να ρυθμίσω αυτού του τύπου τη σύνδεση." #: network/netconnect.pm:969 standalone/drakgw:254 standalone/drakpxe:142 #, c-format msgid "Choose the network interface" msgstr "Επιλέξτε συσκευή δικτύου" #: network/netconnect.pm:970 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Παρακαλώ επιλέξτε ποια συσκευή δικτύου θέλετε να χρησιμοποιήσετε για την " "σύνδεση στο Διαδίκτυο" #: network/netconnect.pm:991 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Παρακαλώ εισάγετε το όνομα του συστήματος.\n" "Το όνομα αυτό πρέπει να είναι ένα πλήρες όνομα συστήματος,\n" "όπως π.χ. ``mybox.mylab.myco.com''.\n" "Μπορείτε επίσης να εισάγετε και την διεύθυνση IP της πύλης δικτύου" #: network/netconnect.pm:995 #, c-format msgid "Last but not least you can also type in your DNS server IP addresses." msgstr "" #: network/netconnect.pm:997 #, fuzzy, c-format msgid "Host name (optional)" msgstr "Ρύθμιση συστήματος" #: network/netconnect.pm:997 #, c-format msgid "Host name" msgstr "Όνομα συστήματος" #: network/netconnect.pm:998 #, fuzzy, c-format msgid "DNS server 1" msgstr "Εξυπηρετητής DNS" #: network/netconnect.pm:999 #, fuzzy, c-format msgid "DNS server 2" msgstr "Εξυπηρετητής DNS" #: network/netconnect.pm:1000 #, fuzzy, c-format msgid "DNS server 3" msgstr "Εξυπηρετητής DNS" #: network/netconnect.pm:1001 #, fuzzy, c-format msgid "Search domain" msgstr "Τομέας NIS" #: network/netconnect.pm:1002 #, c-format msgid "By default search domain will be set from the fully-qualified host name" msgstr "" #: network/netconnect.pm:1003 #, c-format msgid "Gateway (e.g. %s)" msgstr "Πύλη (π.χ. %s)" #: network/netconnect.pm:1005 #, c-format msgid "Gateway device" msgstr "Συσκευή πύλης" #: network/netconnect.pm:1014 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "Η IP διεύθυνση DNS πρέπει να είναι της μορφής 1.2.3.4" #: network/netconnect.pm:1019 standalone/drakconnect:571 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "Η IP διεύθυνση της πύλης πρέπει να είναι της μορφής 1.2.3.4" #: network/netconnect.pm:1030 #, c-format msgid "" "Enter a Zeroconf host name which will be the one that your machine will get " "back to other machines on the network:" msgstr "" #: network/netconnect.pm:1031 #, c-format msgid "Zeroconf Host name" msgstr "Δικτυακό Όνομα Zeroconf" #: network/netconnect.pm:1034 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: network/netconnect.pm:1044 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" "Έχετε ρυθμίσει πολλούς τρόπους για να συνδέεστε στο Διαδίκτυο.\n" "Επιλέξτε αυτόν που θέλετε να χρησιμοποιήσετε.\n" "\n" #: network/netconnect.pm:1046 #, c-format msgid "Internet connection" msgstr "Σύνδεση Διαδικτύου" #: network/netconnect.pm:1054 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Τι ρύθμιση XFree θέλετε να έχετε;" #: network/netconnect.pm:1070 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Θέλετε να συνδέεστε κατά την εκκίνηση;" #: network/netconnect.pm:1094 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Το δίκτυο πρέπει να επανεκκινηθεί, Θέλετε να το επανεκκινήσετε ;" #: network/netconnect.pm:1100 network/netconnect.pm:1165 #, c-format msgid "Network Configuration" msgstr "Ρυθμίσεις δικτύου" #: network/netconnect.pm:1101 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" "Ένα πρόβλημα εμφανίστηκε κατά την επανεκκίνηση του δικτύου: \n" "\n" "%s" #: network/netconnect.pm:1110 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Θέλετε να δοκιμάσετε να συνδεθείτε στο Διαδίκτυο τώρα;" #: network/netconnect.pm:1118 standalone/drakconnect:958 #, c-format msgid "Testing your connection..." msgstr "Δοκιμή σύνδεσης... " #: network/netconnect.pm:1134 #, c-format msgid "The system is now connected to the Internet." msgstr "Το σύστημα είναι τώρα συνδεμένο στο Διαδίκτυο." #: network/netconnect.pm:1135 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "Για λόγους ασφαλείας, θα αποσυνδεθείτε τώρα." #: network/netconnect.pm:1136 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "Το σύστημα φαίνεται να μην είναι συνδεμένο στο Διαδίκτυο\n" "Προσπαθήστε να ξαναρυθμίσετε τη σύνδεσή σας." #: network/netconnect.pm:1150 #, fuzzy, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" "Συγχαρητήρια, η ρύθμιση δικτύου και διαδικτύου τελείωσε.\n" "Οι ρυθμίσεις θα εφαρμοστούν τώρα στο σύστημά σας.\n" "\n" #: network/netconnect.pm:1153 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" "Αφού γίνει αυτό, προτείνουμε να επανεκκινήσετε το Χ περιβάλλον για να " "αποφύγετε τα προβλήματα αλλαγής δικτυακού ονόματος." #: network/netconnect.pm:1154 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" "Προβλήματα κατά τη ρύθμιση.\n" "Δοκιμάστε τη σύνδεση με το net_monitor ή το mcc. Αν δεν λειτουργήσει η " "σύνδεση, τότε θα πρέπει να εκκινήσετε ξανά τη ρύθμιση." #: network/netconnect.pm:1166 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" "Επειδή κάνετε μια δικτυακή εγκατάσταση, το δίκτυο είναι ήδη ρυθμισμένο.\n" "Κάντε κλικ στο Εντάξει για να διατηρήσετε τις ρυθμίσεις σας, ή άκυρο για να " "ξαναρυθμίσετε τη σύνδεση στο Διαδίκτυο.\n" #: network/network.pm:314 #, c-format msgid "Proxies configuration" msgstr "Ρυθμίσεις proxies" #: network/network.pm:315 #, c-format msgid "HTTP proxy" msgstr "HTTP proxy" #: network/network.pm:316 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: network/network.pm:319 #, c-format msgid "Proxy should be http://..." msgstr "Ο proxy πρέπει να είναι http://..." #: network/network.pm:320 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Το URL πρέπει να ξεκινά με 'http:' ή 'ftp:'" #: network/shorewall.pm:26 #, c-format msgid "Firewalling configuration detected!" msgstr "Ανιχνεύθηκε ρύθμιση του Τοίχους Προστασίας!" #: network/shorewall.pm:27 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Προσοχή! Ανιχνεύθηκε μια ήδη υπάρχουσα ρύθμιση Τοίχους Προστασίας. Ίσως " "χρειαστούν ορισμένες χειροκίνητες ρυθμίσεις μετά την εγκατάσταση." #: network/shorewall.pm:70 #, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" #: network/tools.pm:207 #, fuzzy, c-format msgid "Insert floppy" msgstr "Εισάγετε δισκέτα στον οδηγό %s" #: network/tools.pm:208 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "Εισάγετε μια μορφοποιημένη δισκέτα FAT στον οδηγό %s" #: network/tools.pm:209 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Πού θέλετε να συνδέσετε την συσκευή %s;" #: partition_table.pm:642 #, c-format msgid "mount failed: " msgstr "σύνδεση απέτυχε: " #: partition_table.pm:747 #, c-format msgid "Extended partition not supported on this platform" msgstr "Η εκτεταμένη κατάτμηση δεν υποστηρίζεται σε αυτόν τον τύπο συστήματος" #: partition_table.pm:765 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Υπάρχει ένα κενό στον πίνακα κατατμήσεων μα δεν μπορώ να το χρησιμοποιήσω.\n" "Η μοναδική λύση είναι να μετακινήσετε τις πρωτεύουσες κατατμήσεις σας έτσι " "ώστε το κενό να βρεθεί δίπλα στην εκτεταμένη κατάτμηση" #: partition_table.pm:852 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Η επαναφορά από το αρχείο %s απέτυχε: %s" #: partition_table.pm:854 #, c-format msgid "Bad backup file" msgstr "Κατεστραμμένο εφεδρικό αρχείο" #: partition_table.pm:874 #, c-format msgid "Error writing to file %s" msgstr "Σφάλμα εγγραφής στο αρχείο %s" #: partition_table/raw.pm:181 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Κάτι κακό συμβαίνει στο δίσκο σας. \n" "Ένα τεστ ελέγχου της ακεραιότητας των δεδομένων απέτυχε. \n" "Αυτό σημαίνει πως η οποιαδήποτε εγγραφή στο δίσκο θα καταλήξει σαν τυχαία " "σκουπίδια." #: pkgs.pm:24 #, c-format msgid "must have" msgstr "πρέπει να υπάρχει" #: pkgs.pm:25 #, c-format msgid "important" msgstr "σημαντικό" #: pkgs.pm:26 #, c-format msgid "very nice" msgstr "πολύ καλό" #: pkgs.pm:27 #, c-format msgid "nice" msgstr "καλό" #: pkgs.pm:28 #, c-format msgid "maybe" msgstr "ίσως" #: printer/cups.pm:87 #, c-format msgid "(on %s)" msgstr "(στον %s)" #: printer/cups.pm:87 #, c-format msgid "(on this machine)" msgstr "(σε αυτό το μηχάνημα)" #: printer/cups.pm:99 standalone/printerdrake:197 #, fuzzy, c-format msgid "Configured on other machines" msgstr "Ρύθμιση της σύνδεσης" #: printer/cups.pm:101 #, c-format msgid "On CUPS server \"%s\"" msgstr "Στον εξυπηρετητή CUPS \"%s\"" #: printer/cups.pm:101 printer/printerdrake.pm:3784 #: printer/printerdrake.pm:3793 printer/printerdrake.pm:3934 #: printer/printerdrake.pm:3945 printer/printerdrake.pm:4157 #, c-format msgid " (Default)" msgstr " (Προεπιλεγμένος)" #: printer/data.pm:21 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "PDQ - Print, Don't Queue" #: printer/data.pm:22 #, c-format msgid "PDQ" msgstr "PDQ" #: printer/data.pm:33 #, c-format msgid "LPD - Line Printer Daemon" msgstr "LPD - Line Printer Daemon" #: printer/data.pm:34 #, c-format msgid "LPD" msgstr "LPD" #: printer/data.pm:55 #, c-format msgid "LPRng - LPR New Generation" msgstr "LPRng - LPR New Generation" #: printer/data.pm:56 #, c-format msgid "LPRng" msgstr "LPRng" #: printer/data.pm:81 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "CUPS - Common Unix Printing System" #: printer/detect.pm:148 printer/detect.pm:226 printer/detect.pm:428 #: printer/detect.pm:465 printer/printerdrake.pm:679 #, c-format msgid "Unknown Model" msgstr "Άγνωστο Μοντέλο" #: printer/main.pm:28 #, c-format msgid "Local printer" msgstr "Τοπικός εκτυπωτής" #: printer/main.pm:29 #, c-format msgid "Remote printer" msgstr "Απομακρυσμένος εκτυπωτής" #: printer/main.pm:30 #, c-format msgid "Printer on remote CUPS server" msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή CUPS" #: printer/main.pm:31 printer/printerdrake.pm:1372 #, c-format msgid "Printer on remote lpd server" msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή lpd" #: printer/main.pm:32 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Εκτυπωτής δικτύου (TCP/Socket)" #: printer/main.pm:33 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "Εκτυπωτής σε εξυπηρετητή SMB/Windows 95/98/NT" #: printer/main.pm:34 #, c-format msgid "Printer on NetWare server" msgstr "Εκτυπωτή σε εξυπηρετητή NetWare" #: printer/main.pm:35 printer/printerdrake.pm:1376 #, c-format msgid "Enter a printer device URI" msgstr "Εισάγετε συσκευή εκτυπωτή URI" #: printer/main.pm:36 #, c-format msgid "Pipe job into a command" msgstr "Διασωλήνωση εργασίας σε εντολή" #: printer/main.pm:306 printer/main.pm:574 printer/main.pm:1544 #: printer/main.pm:2217 printer/printerdrake.pm:1781 #: printer/printerdrake.pm:4191 #, c-format msgid "Unknown model" msgstr "Άγνωστο μοντέλο" #: printer/main.pm:331 standalone/printerdrake:196 #, fuzzy, c-format msgid "Configured on this machine" msgstr "(σε αυτό το μηχάνημα)" #: printer/main.pm:337 printer/printerdrake.pm:948 #, c-format msgid " on parallel port #%s" msgstr " στη παράλληλη θήρα #%s" #: printer/main.pm:340 printer/printerdrake.pm:950 #, c-format msgid ", USB printer #%s" msgstr ", εκτυπωτής USB #%s" #: printer/main.pm:342 #, c-format msgid ", USB printer" msgstr ", εκτυπωτής USB" #: printer/main.pm:347 #, c-format msgid ", multi-function device on parallel port #%s" msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s" #: printer/main.pm:350 #, fuzzy, c-format msgid ", multi-function device on a parallel port" msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s" #: printer/main.pm:352 #, c-format msgid ", multi-function device on USB" msgstr ", πολυχρηστική συσκευή στην USB" #: printer/main.pm:354 #, c-format msgid ", multi-function device on HP JetDirect" msgstr ", πολυχρηστική συσκευή στο HP JetDirect" #: printer/main.pm:356 #, c-format msgid ", multi-function device" msgstr ", πολυχρηστική συσκευή" #: printer/main.pm:359 #, c-format msgid ", printing to %s" msgstr ", εκτύπωση στο %s" #: printer/main.pm:361 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "στον εξυπηρετητή LPD \"%s\", στον εκτυπωτή \"%s\"" #: printer/main.pm:363 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP host \"%s\", θύρα %s" #: printer/main.pm:367 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "στον εξυπηρετητή SMB/Windows \"%s\", κοινόχρηστο \"%s\"" #: printer/main.pm:371 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "στον εξυπηρετητή Novell \"%s\", στον εκτυπωτή \"%s\"" #: printer/main.pm:373 #, c-format msgid ", using command %s" msgstr ", με την εντολή %s" #: printer/main.pm:388 #, fuzzy, c-format msgid "Parallel port #%s" msgstr " στη παράλληλη θήρα #%s" #: printer/main.pm:391 printer/printerdrake.pm:964 printer/printerdrake.pm:987 #: printer/printerdrake.pm:1005 #, c-format msgid "USB printer #%s" msgstr "εκτυπωτής USB #%s" #: printer/main.pm:393 #, fuzzy, c-format msgid "USB printer" msgstr ", εκτυπωτής USB" #: printer/main.pm:398 #, fuzzy, c-format msgid "Multi-function device on parallel port #%s" msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s" #: printer/main.pm:401 #, fuzzy, c-format msgid "Multi-function device on a parallel port" msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s" #: printer/main.pm:403 #, fuzzy, c-format msgid "Multi-function device on USB" msgstr ", πολυχρηστική συσκευή στην USB" #: printer/main.pm:405 #, fuzzy, c-format msgid "Multi-function device on HP JetDirect" msgstr ", πολυχρηστική συσκευή στο HP JetDirect" #: printer/main.pm:407 #, fuzzy, c-format msgid "Multi-function device" msgstr ", πολυχρηστική συσκευή" #: printer/main.pm:410 #, fuzzy, c-format msgid "Prints into %s" msgstr ", εκτύπωση στο %s" #: printer/main.pm:412 #, fuzzy, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "στον εξυπηρετητή LPD \"%s\", στον εκτυπωτή \"%s\"" #: printer/main.pm:414 #, fuzzy, c-format msgid "TCP/IP host \"%s\", port %s" msgstr ", TCP/IP host \"%s\", θύρα %s" #: printer/main.pm:418 #, fuzzy, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "στον εξυπηρετητή SMB/Windows \"%s\", κοινόχρηστο \"%s\"" #: printer/main.pm:422 #, fuzzy, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "στον εξυπηρετητή Novell \"%s\", στον εκτυπωτή \"%s\"" #: printer/main.pm:424 #, fuzzy, c-format msgid "Uses command %s" msgstr ", με την εντολή %s" #: printer/main.pm:426 #, c-format msgid "URI: %s" msgstr "" #: printer/main.pm:571 printer/printerdrake.pm:725 #: printer/printerdrake.pm:2331 #, c-format msgid "Raw printer (No driver)" msgstr "Ακατέργαστος εκτυπωτής (Χωρίς οδηγό)" #: printer/main.pm:1085 printer/printerdrake.pm:179 #: printer/printerdrake.pm:191 #, c-format msgid "Local network(s)" msgstr "Τοπικό Δίκτυο(α)" #: printer/main.pm:1087 printer/printerdrake.pm:195 #, c-format msgid "Interface \"%s\"" msgstr "Διεπαφή \"%s\"" #: printer/main.pm:1089 #, c-format msgid "Network %s" msgstr "Δίκτυο %s" #: printer/main.pm:1091 #, fuzzy, c-format msgid "Host %s" msgstr "Όνομα συστήματος" #: printer/main.pm:1120 #, c-format msgid "%s (Port %s)" msgstr "%s (Θύρα %s)" #: printer/printerdrake.pm:22 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: printer/printerdrake.pm:62 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "Ρυθμίσεις κοινής χρήσης εκτυπωτών CUPS" #: printer/printerdrake.pm:63 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Εδώ μπορείτε να επιλέξετε αν οι συνδεμένοι εκτυπωτές αυτού το μηχανήματος θα " "είναι προσβάσιμοι από απομακρυσμένα μηχανήματα και από ποια." #: printer/printerdrake.pm:64 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" "Επίσης εδώ μπορείτε να ορίσετε αν οι εκτυπωτές που βρίσκονται σε " "απομακρυσμένα μηχανήματα θα είναι αυτόματα διαθέσιμοι και σε αυτό το " "μηχάνημα." #: printer/printerdrake.pm:67 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" "Οι εκτυπωτές σε αυτό το μηχάνημα είναι διαθέσιμοι σε άλλους υπολογιστές" #: printer/printerdrake.pm:69 #, c-format msgid "Automatically find available printers on remote machines" msgstr "Βρείτε αυτόματα διαθέσιμους εκτυπωτές σε απομακρυσμένα μηχανήματα" #: printer/printerdrake.pm:71 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "Κοινόχρηστοι εκτυπωτές στους υπολογιστές/δίκτυα: " #: printer/printerdrake.pm:73 #, c-format msgid "Custom configuration" msgstr "Προσαρμοσμένη Ρύθμιση" #: printer/printerdrake.pm:78 standalone/scannerdrake:554 #: standalone/scannerdrake:571 #, fuzzy, c-format msgid "No remote machines" msgstr "(σε αυτό το μηχάνημα)" #: printer/printerdrake.pm:88 #, c-format msgid "Additional CUPS servers: " msgstr "Πρόσθετοι εξυπηρετητές CUPS: " #: printer/printerdrake.pm:93 #, c-format msgid "None" msgstr "Κανένας" #: printer/printerdrake.pm:95 #, fuzzy, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "CUPS CUPS Όλα Printerdrake CUPS εξυπηρετητής εξυπηρετητής." #: printer/printerdrake.pm:100 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "Αλλαγή συστήματος εκτύπωσης" #: printer/printerdrake.pm:101 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: printer/printerdrake.pm:105 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "Αυτόματη διόρθωση της ρύθμισης CUPS" #: printer/printerdrake.pm:107 #, fuzzy, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" "Πότε CUPS\n" "\n" " LPD LPRng CUPS\n" "\n" "\n" "\n" " εξυπηρετητής\n" "\n" "." #: printer/printerdrake.pm:129 printer/printerdrake.pm:205 #, c-format msgid "Sharing of local printers" msgstr "Κοινή χρήση τοπικών εκτυπωτών" #: printer/printerdrake.pm:130 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" "Αυτά είναι τα μηχανήματα όπου οι τοπικά συνδεμένοι εκτυπωτές(ης) πρέπει να " "είναι διαθέσιμοι:" #: printer/printerdrake.pm:141 #, c-format msgid "Add host/network" msgstr "Προσθήκη υπολογιστή/δίκτυο" #: printer/printerdrake.pm:147 #, c-format msgid "Edit selected host/network" msgstr "Επεξεργασία επιλεγμένου υπολογιστή/δίκτυο" #: printer/printerdrake.pm:156 #, c-format msgid "Remove selected host/network" msgstr "Αφαίρεση επιλεγμένου υπολογιστή/δίκτυο" #: printer/printerdrake.pm:187 printer/printerdrake.pm:197 #: printer/printerdrake.pm:210 printer/printerdrake.pm:217 #: printer/printerdrake.pm:248 printer/printerdrake.pm:266 #, c-format msgid "IP address of host/network:" msgstr "Διεύθυνση IP του υπολογιστή/δικτύου:" #: printer/printerdrake.pm:206 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: printer/printerdrake.pm:213 #, c-format msgid "Host/network IP address missing." msgstr "Λείπει η διεύθυνση του Υπολογιστή/Δικτύου." #: printer/printerdrake.pm:221 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: printer/printerdrake.pm:222 printer/printerdrake.pm:400 #, c-format msgid "Examples for correct IPs:\n" msgstr "Παραδείγματα σωστών IP:\n" #: printer/printerdrake.pm:246 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" "Αυτός ο υπολογιστής/δίκτυο είναι ήδη στη λίστα, δεν μπορεί να προστεθεί " "ξανά.\n" #: printer/printerdrake.pm:316 printer/printerdrake.pm:387 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "CUPS" #: printer/printerdrake.pm:317 #, fuzzy, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "Προσθήκη CUPS." #: printer/printerdrake.pm:328 #, c-format msgid "Add server" msgstr "Προσθήκη εξυπηρετητή" #: printer/printerdrake.pm:334 #, c-format msgid "Edit selected server" msgstr "Επεξεργασία επιλεγμένου εξυπηρετητή" #: printer/printerdrake.pm:343 #, c-format msgid "Remove selected server" msgstr "Αφαίρεση επιλεγμένου εξυπηρετητή" #: printer/printerdrake.pm:388 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: printer/printerdrake.pm:389 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: printer/printerdrake.pm:393 #, c-format msgid "Server IP missing!" msgstr "Λείπει η IP του εξυπηρετητή!" #: printer/printerdrake.pm:399 #, c-format msgid "The entered IP is not correct.\n" msgstr "Η διεύθυνση IP που εισάγατε δεν είναι σωστή.\n" #: printer/printerdrake.pm:411 printer/printerdrake.pm:1582 #, c-format msgid "The port number should be an integer!" msgstr "Ο αριθμός θύρας πρέπει να είναι ακέραιος αριθμός!" #: printer/printerdrake.pm:422 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" "O εξυπηρετητής είναι ήδη στη λίστα, δεν μπορείτε να τον προσθέσετε ξανά.\n" #: printer/printerdrake.pm:433 printer/printerdrake.pm:1603 #: standalone/harddrake2:64 #, c-format msgid "Port" msgstr "Θύρα" #: printer/printerdrake.pm:478 printer/printerdrake.pm:545 #: printer/printerdrake.pm:605 printer/printerdrake.pm:621 #: printer/printerdrake.pm:704 printer/printerdrake.pm:761 #: printer/printerdrake.pm:787 printer/printerdrake.pm:1800 #: printer/printerdrake.pm:1808 printer/printerdrake.pm:1830 #: printer/printerdrake.pm:1857 printer/printerdrake.pm:1892 #: printer/printerdrake.pm:1929 printer/printerdrake.pm:1939 #: printer/printerdrake.pm:2182 printer/printerdrake.pm:2187 #: printer/printerdrake.pm:2326 printer/printerdrake.pm:2436 #: printer/printerdrake.pm:2901 printer/printerdrake.pm:2966 #: printer/printerdrake.pm:3000 printer/printerdrake.pm:3003 #: printer/printerdrake.pm:3122 printer/printerdrake.pm:3184 #: printer/printerdrake.pm:3256 printer/printerdrake.pm:3277 #: printer/printerdrake.pm:3286 printer/printerdrake.pm:3377 #: printer/printerdrake.pm:3475 printer/printerdrake.pm:3481 #: printer/printerdrake.pm:3488 printer/printerdrake.pm:3534 #: printer/printerdrake.pm:3574 printer/printerdrake.pm:3586 #: printer/printerdrake.pm:3597 printer/printerdrake.pm:3606 #: printer/printerdrake.pm:3619 printer/printerdrake.pm:3689 #: printer/printerdrake.pm:3740 printer/printerdrake.pm:3805 #: printer/printerdrake.pm:4065 printer/printerdrake.pm:4108 #: printer/printerdrake.pm:4254 printer/printerdrake.pm:4312 #: printer/printerdrake.pm:4341 standalone/printerdrake:65 #: standalone/printerdrake:85 standalone/printerdrake:515 #, c-format msgid "Printerdrake" msgstr "Printerdrake" #: printer/printerdrake.pm:479 #, fuzzy, c-format msgid "Restarting CUPS..." msgstr "Επανεκκίνηση XFS" #: printer/printerdrake.pm:502 #, c-format msgid "Select Printer Connection" msgstr "Τρόπος σύνδεσης εκτυπωτή" #: printer/printerdrake.pm:503 #, c-format msgid "How is the printer connected?" msgstr "Πώς είναι συνδεδεμένος ο εκτυπωτής σας;" #: printer/printerdrake.pm:505 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "\n" "Εκτυπωτές που είναι συνδεμένοι σε απομακρυσμένους εξυπηρετητές CUPS δεν " "χρειάζεται να ρυθμιστούν εδώ, θα ανιχνευθούν αυτόματα." #: printer/printerdrake.pm:508 printer/printerdrake.pm:3807 #, c-format msgid "" "\n" "WARNING: No local network connection active, remote printers can neither be " "detected nor tested!" msgstr "" #: printer/printerdrake.pm:515 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "Αυτόματη ανίχνευση εκτυπωτές (Τοπικοί, TCP/Socket, και εκτυπωτές SMB)" #: printer/printerdrake.pm:545 #, c-format msgid "Checking your system..." msgstr "Έλεγχος του συστήματος σας..." #: printer/printerdrake.pm:560 #, c-format msgid "and one unknown printer" msgstr "και ένας άγνωστος εκτυπωτής" #: printer/printerdrake.pm:562 #, c-format msgid "and %d unknown printers" msgstr "και %d άγνωστοι εκτυπωτές" #: printer/printerdrake.pm:566 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Οι παρακάτω εκτυπωτές\n" "\n" "%s%s\n" "είναι άμεσα συνδεμένοι στο σύστημά σας" #: printer/printerdrake.pm:568 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" "Ο παρακάτω εκτυπωτής\n" "\n" "%s%s\n" "είναι άμεσα συνδεμένοι στο σύστημά σας" #: printer/printerdrake.pm:569 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" "Ο παρακάτω εκτυπωτής\n" "\n" "%s%s\n" "είναι άμεσα συνδεμένος στο σύστημά σας" #: printer/printerdrake.pm:573 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" "\n" "Ένας άγνωστος εκτυπωτής είναι συνδεμένος απευθείας στο σύστημά σας" #: printer/printerdrake.pm:574 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" "\n" "Είναι %d εκτυπωτές συνδεμένοι απευθείας στο σύστημά σας" #: printer/printerdrake.pm:577 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "Δεν βρέθηκαν εκτυπωτές που να είναι συνδεμένοι στον υπολογιστή σας" #: printer/printerdrake.pm:580 #, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "" " (Βεβαιωθείτε ότι όλοι οι εκτυπωτές σας είναι συνδεμένοι και σε " "λειτουργία).\n" #: printer/printerdrake.pm:593 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" "Θέλετε να ενεργοποιήσετε την εκτύπωση στους παραπάνω εκτυπωτές ή σε κάποιον " "άλλον στο τοπικό σας δίκτυο;\n" #: printer/printerdrake.pm:594 #, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "" "Θέλετε να ενεργοποιήσετε την εκτύπωση σε εκτυπωτές στο τοπικό σας δίκτυο;\n" #: printer/printerdrake.pm:596 #, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Θέλετε να ενεργοποιήσετε την εκτύπωση στους παραπάνω εκτυπωτές ;\n" #: printer/printerdrake.pm:597 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" "Είστε βέβαιοι ότι θέλετε να ρυθμίσετε την εκτύπωση σε αυτό το μηχάνημα;\n" #: printer/printerdrake.pm:598 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" "Σημ.: Ανάλογα με το μοντέλο του εκτυπωτή και το σύστημα εκτύπωσης θα " "εγκατασταθεί επιπλέον μέχρι και %d MB λογισμικό" #: printer/printerdrake.pm:622 #, c-format msgid "Searching for new printers..." msgstr "Αναζήτηση για νέους εκτυπωτές..." #: printer/printerdrake.pm:706 #, c-format msgid "Configuring printer ..." msgstr "Ρυθμίζεται ο εκτυπωτής ..." #: printer/printerdrake.pm:707 printer/printerdrake.pm:762 #: printer/printerdrake.pm:3598 #, c-format msgid "Configuring printer \"%s\"..." msgstr "Ρύθμιση εκτυπωτή \"%s\"..." #: printer/printerdrake.pm:727 #, c-format msgid "(" msgstr "(" #: printer/printerdrake.pm:728 #, c-format msgid " on " msgstr " στο " #: printer/printerdrake.pm:729 standalone/scannerdrake:130 #, c-format msgid ")" msgstr ")" #: printer/printerdrake.pm:734 printer/printerdrake.pm:2338 #, c-format msgid "Printer model selection" msgstr "Επιλογή μοντέλου εκτυπωτή" #: printer/printerdrake.pm:735 printer/printerdrake.pm:2339 #, c-format msgid "Which printer model do you have?" msgstr "Τι μοντέλο εκτυπωτή έχετε;" #: printer/printerdrake.pm:736 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" "\n" "\n" "Το Printerdrake δεν μπόρεσε να καθορίσει το μοντέλο του εκτυπωτή %s. " "Παρακαλώ επιλέξτε το σωστό μοντέλο από τη λίστα." #: printer/printerdrake.pm:739 printer/printerdrake.pm:2344 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" "Ο εκτυπωτής σας δεν υπάρχει στη λίστα, παρακαλώ διαλέξτε έναν συμβατό ή έναν " "παρόμοιο εκτυπωτή." #: printer/printerdrake.pm:788 printer/printerdrake.pm:3587 #: printer/printerdrake.pm:3741 printer/printerdrake.pm:4066 #: printer/printerdrake.pm:4109 printer/printerdrake.pm:4313 #, c-format msgid "Configuring applications..." msgstr "Ρύθμιση εφαρμογών..." #: printer/printerdrake.pm:824 printer/printerdrake.pm:836 #: printer/printerdrake.pm:894 printer/printerdrake.pm:1787 #: printer/printerdrake.pm:3823 printer/printerdrake.pm:4006 #, c-format msgid "Add a new printer" msgstr "Προσθήκη νέου εκτυπωτή" #: printer/printerdrake.pm:825 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" "\n" "Καλώς ορίσατε στον Οδηγό Ρύθμισης Εκτυπωτή\n" "\n" "Ο οδηγός αυτός σας βοηθάει στην εγκατάσταση τοπικών ή απομακρυσμένων " "εκτυπωτών που θα χρησιμοποιηθούν σε αυτό και σε άλλα μηχανήματα στο δίκτυο\n" "\n" "Σας ζητά όλες τις απαραίτητες πληροφορίες για να ρυθμίσετε τους εκτυπωτές " "και να αποκτήσετε πρόσβαση σε όλους τους διαθέσιμους οδηγούς εκτυπωτών, " "επιλογές των οδηγών και τους τύπους συνδέσεων." #: printer/printerdrake.pm:838 #, fuzzy, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" " Εκτυπωτής Οδηγός\n" "\n" " Τομέας Windows \n" "\n" " ανιχνεύθηκε Τομέας Windows \n" "\n" " Τομέας Windows \n" "\n" " Επόμενο Άκυρο." #: printer/printerdrake.pm:847 #, fuzzy, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" " Εκτυπωτής Οδηγός\n" "\n" "\n" "\n" " ανιχνεύθηκε\n" "\n" " Επόμενο Άκυρο." #: printer/printerdrake.pm:855 #, fuzzy, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" " Εκτυπωτής Οδηγός\n" "\n" "\n" "\n" " ανιχνεύθηκε\n" "\n" "\n" "\n" " Επόμενο Άκυρο." #: printer/printerdrake.pm:864 #, fuzzy, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" "\n" " Εκτυπωτής Οδηγός\n" "\n" "\n" "\n" " ανιχνεύθηκε\n" "\n" " Επόμενο Άκυρο." #: printer/printerdrake.pm:873 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι σε αυτό το μηχάνημα" #: printer/printerdrake.pm:876 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι στο τοπικό σας δίκτυο" #: printer/printerdrake.pm:879 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" "Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι σε μηχανήματα που έχουν Microsoft " "Windows" #: printer/printerdrake.pm:895 #, fuzzy, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the %s Control Center." msgstr "" "\n" "Συγχαρητήρια, ο εκτυπωτής σας εγκαταστάθηκε και ρυθμίστηκε!\n" "\n" "Μπορείτε τώρα να εκτυπώσετε με την εντολή \"Εκτύπωση\" της εφαρμογής σας " "(συνήθως κάτω από το μενού \"Αρχείο\").\n" "\n" "Αν θέλετε να προσθέσετε, να αφαιρέσετε ή να μετονομάσετε τον εκτυπωτή σας ή " "αν θέλετε να αλλάξετε τις προεπιλεγμένες ρυθμίσεις σας (θέση του χαρτιού, " "ποιότητα εκτύπωσης) επιλέξτε \"Εκτυπωτής\" στο τμήμα \"Υλικό\"του Κέντρου " "Ελέγχου Mandrake." #: printer/printerdrake.pm:930 printer/printerdrake.pm:1060 #: printer/printerdrake.pm:1276 printer/printerdrake.pm:1516 #, c-format msgid "Printer auto-detection" msgstr "Αυτόματη ανίχνευση εκτυπωτών" #: printer/printerdrake.pm:930 #, c-format msgid "Detecting devices..." msgstr "Εντοπισμός συσκευών..." #: printer/printerdrake.pm:952 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", εκτυπωτής δικτύου \"%s\", θύρα %s" #: printer/printerdrake.pm:954 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Εκτυπωτής \"%s\" σε εξυπηρετητή SMB/Windows \"%s\"" #: printer/printerdrake.pm:958 #, c-format msgid "Detected %s" msgstr "Βρέθηκε ο %s" #: printer/printerdrake.pm:962 printer/printerdrake.pm:985 #: printer/printerdrake.pm:1002 #, c-format msgid "Printer on parallel port #%s" msgstr "Εκτυπωτής στην παράλληλη θήρα #%s" #: printer/printerdrake.pm:966 #, c-format msgid "Network printer \"%s\", port %s" msgstr "Εκτυπωτής δικτύου \"%s\", θύρα %s" #: printer/printerdrake.pm:968 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "Εκτυπωτής \"%s\" σε εξυπηρετητή SMB/Windows \"%s\"" #: printer/printerdrake.pm:1047 #, c-format msgid "Local Printer" msgstr "Τοπικός Εκτυπωτής" #: printer/printerdrake.pm:1048 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" "Δεν βρέθηκαν τοπικοί εκτυπωτές! Για να ρυθμίσετε μόνοι σας έναν εκτυπωτή " "δώστε το όνομα εκτυπωτή/όνομα αρχείου στη γραμμή εισαγωγής (Παράλληλες " "θύρες: /dev/lp0, /dev/lp1, ..., αντίστοιχες των LPT1:, LPT2:, ..., 1ος " "εκτυπωτής USB: /dev/usb/lp0, 2ος USB εκτυπωτής: /dev/usb/lp1, ...)." #: printer/printerdrake.pm:1052 #, c-format msgid "You must enter a device or file name!" msgstr "Πρέπει να ορίσετε μια συσκευή ή ένα όνομα αρχείου!" #: printer/printerdrake.pm:1061 #, c-format msgid "No printer found!" msgstr "Δεν βρέθηκε εκτυπωτής!" #: printer/printerdrake.pm:1069 #, c-format msgid "Local Printers" msgstr "Τοπικοί εκτυπωτές" #: printer/printerdrake.pm:1070 #, c-format msgid "Available printers" msgstr "Διαθέσιμοι εκτυπωτής" #: printer/printerdrake.pm:1074 printer/printerdrake.pm:1083 #, c-format msgid "The following printer was auto-detected. " msgstr "Οι παρακάτω εκτυπωτές βρέθηκαν αυτόματα." #: printer/printerdrake.pm:1076 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" "Αν δεν είναι αυτός που θέλετε να ρυθμίσετε, εισάγετε το όνομα συσκευής/όνομα " "αρχείου στη γραμμή εισαγωγής" #: printer/printerdrake.pm:1077 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" "Εναλλακτικά, μπορείτε να εισάγετε ένα όνομα συσκευής/αρχείου στη γραμμή " "εισαγωγής" #: printer/printerdrake.pm:1078 printer/printerdrake.pm:1087 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "Ορίστε η λίστα των εκτυπωτών που ανιχνεύτηκαν αυτόματα." #: printer/printerdrake.pm:1080 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" "Παρακαλώ επιλέξτε τον εκτυπωτή που θέλετε να ρυθμίσετε ή εισάγετε ένα όνομα " "συσκευής/αρχείου στη γραμμή εισαγωγής" #: printer/printerdrake.pm:1081 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" "Παρακαλώ επιλέξτε τον εκτυπωτή στον οποίο θα αποστέλλονται οι εργασίες " "εκτύπωσης ή δώστε το όνομα συσκευής/αρχείου στη γραμμή εισαγωγής" #: printer/printerdrake.pm:1085 #, fuzzy, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "ανιχνεύθηκε." #: printer/printerdrake.pm:1086 #, c-format msgid "Currently, no alternative possibility is available" msgstr "Προς το παρόν δεν υπάρχει άλλη εναλλακτική" #: printer/printerdrake.pm:1089 #, fuzzy, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "ανιχνεύθηκε." #: printer/printerdrake.pm:1090 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "" "Παρακαλώ επιλέξτε τον εκτυπωτή στον οποίο θα αποστέλλονται οι εργασίες " "εκτύπωσης." #: printer/printerdrake.pm:1092 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" "Παρακαλώ επιλέξτε τη θύρα όπου είναι συνδεδεμένος ο εκτυπωτή σας ή εισάγετε " "ένα όνομα συσκευής/αρχείου στη γραμμή εισαγωγής" #: printer/printerdrake.pm:1093 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "Επιλέξτε σε ποία θήρα είναι συνδεδεμένος ο εκτυπωτής σας." #: printer/printerdrake.pm:1095 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" "(Παράλληλες θύρες: /dev/lp0, /dev/lp1, ..., αντίστοιχες των LPT1:, " "LPT2:, ..., 1ος εκτυπωτής USB: /dev/usb/lp0, 2ος USB εκτυπωτής: /dev/usb/" "lp1, ...)." #: printer/printerdrake.pm:1099 #, c-format msgid "You must choose/enter a printer/device!" msgstr "Πρέπει να επιλέξτε/ορίσετε μια συσκευή/εκτυπωτή!" #: printer/printerdrake.pm:1168 #, c-format msgid "Remote lpd Printer Options" msgstr "Επιλογές απομακρυσμένου lpd εκτυπωτή" #: printer/printerdrake.pm:1169 #, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Για να χρησιμοποιήσετε έναν απομακρυσμένο εκτύπωση πρέπει να δώσετε το " "δικτυακό όνομα του εξυπηρετητή εκτυπώσεων, καθώς και το όνομα του εκτυπωτή " "σε αυτόν τον εξυπηρετητή." #: printer/printerdrake.pm:1170 #, c-format msgid "Remote host name" msgstr "Απομακρυσμένο δικτυακό όνομα" #: printer/printerdrake.pm:1171 #, c-format msgid "Remote printer name" msgstr "Απομακρυσμένος όνομα εκτυπωτή" #: printer/printerdrake.pm:1174 #, c-format msgid "Remote host name missing!" msgstr "Το απομακρυσμένο δικτυακό όνομα λείπει!" #: printer/printerdrake.pm:1178 #, c-format msgid "Remote printer name missing!" msgstr "Το απομακρυσμένο όνομα εκτυπωτή λείπει!" #: printer/printerdrake.pm:1200 printer/printerdrake.pm:1714 #: standalone/drakTermServ:442 standalone/drakTermServ:725 #: standalone/drakTermServ:741 standalone/drakTermServ:1332 #: standalone/drakTermServ:1340 standalone/drakTermServ:1351 #: standalone/drakbackup:767 standalone/drakbackup:874 #: standalone/drakbackup:908 standalone/drakbackup:1027 #: standalone/drakbackup:1891 standalone/drakbackup:1895 #: standalone/drakconnect:254 standalone/drakconnect:283 #: standalone/drakconnect:512 standalone/drakconnect:516 #: standalone/drakconnect:540 standalone/harddrake2:159 #, c-format msgid "Information" msgstr "Πληροφορίες" #: printer/printerdrake.pm:1200 printer/printerdrake.pm:1714 #, c-format msgid "Detected model: %s %s" msgstr "Βρέθηκε το μοντέλο: %s %s" #: printer/printerdrake.pm:1276 printer/printerdrake.pm:1516 #, c-format msgid "Scanning network..." msgstr "Αναζήτηση στο δίκτυο..." #: printer/printerdrake.pm:1287 printer/printerdrake.pm:1308 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", εκτυπωτής \"%s\"στον εξυπηρετητή \"%s\"" #: printer/printerdrake.pm:1290 printer/printerdrake.pm:1311 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Εκτυπωτής \"%s\"στον εξυπηρετητή \"%s\"" #: printer/printerdrake.pm:1332 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Επιλογές εκτυπωτή SMB (Windows 9x/NT)" #: printer/printerdrake.pm:1333 #, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Για να εκτυπώσετε σε έναν SMB εκτυπωτή, πρέπει να δώσετε το δικτυακό όνομα " "SMB (Σημείωση! Μπορεί να είναι διαφορετικό από το δικτυακό όνομα TCP/IP!) " "και ίσως την διεύθυνση IP του εξυπηρετητή εκτυπώσεων, το όνομα του εκτυπωτή " "στον οποίο επιθυμείτε πρόσβαση, καθώς και οποιαδήποτε απαραίτητη πληροφορία " "περί κωδικού χρήστη, κωδικού πρόσβασης και τομέα ή ομάδας εργασίας." #: printer/printerdrake.pm:1334 #, fuzzy, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "ανιχνεύθηκε χρήστης." #: printer/printerdrake.pm:1336 #, c-format msgid "SMB server host" msgstr "Δικτυακό όνομα SMB εξυπηρετητή" #: printer/printerdrake.pm:1337 #, c-format msgid "SMB server IP" msgstr "IP διεύθυνση SMB εξυπηρετητή" #: printer/printerdrake.pm:1338 #, c-format msgid "Share name" msgstr "Όνομα πόρου:" #: printer/printerdrake.pm:1341 #, c-format msgid "Workgroup" msgstr "Ομάδα εργασίας:" #: printer/printerdrake.pm:1343 #, c-format msgid "Auto-detected" msgstr "Εντοπίστηκαν αυτόματα" #: printer/printerdrake.pm:1353 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "Είτε το όνομα του εξυπηρετητή ή η IP του πρέπει να δοθούν!" #: printer/printerdrake.pm:1357 #, c-format msgid "Samba share name missing!" msgstr "Το όνομα για το Samba λείπει!" #: printer/printerdrake.pm:1363 #, c-format msgid "SECURITY WARNING!" msgstr "ΠΡΟΕΙΔΟΠΟΙΗΣΗ ΑΣΦΑΛΕΙΑΣ!" #: printer/printerdrake.pm:1364 #, fuzzy, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Τομέας Windows Τομέας Windows εξυπηρετητής χρήστης\n" "\n" " Τομέας Windows εξυπηρετητής\n" "\n" " Τομέας Windows εξυπηρετητής Ολοκληρώθηκε\n" "\n" " Τομέας Windows εξυπηρετητής LPD Printerdrake\n" #: printer/printerdrake.pm:1374 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" "Ρυθμίστε τον εξυπηρετητή Windows ώστε να είναι διαθέσιμος ο εκτυπωτής στο " "πρωτόκολλο IPP και ρυθμίστε τις εκτυπώσεις από αυτό το μηχάνημα με τον τύπο " "σύνδεσης \"%s\" στο Printerdrake.\n" "\n" #: printer/printerdrake.pm:1377 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" "Συνδέστε τον εκτυπωτή σας σε έναν εξυπηρετητή Linux και συνδέστε σε αυτόν τα " "μηχανήματα Windows σαν πελάτες\n" "\n" "Θέλετε πραγματικά να συνεχίσετε τις ρυθμίσεις του εκτυπωτή σας που κάνετε;" #: printer/printerdrake.pm:1449 #, c-format msgid "NetWare Printer Options" msgstr "Επιλογές Εκτυπωτή NetWare" #: printer/printerdrake.pm:1450 #, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Για να εκτυπώσετε σε έναν εκτυπωτή NetWare, πρέπει να δώσετε το όνομα του " "εξυπηρετητή εκτυπώσεων NetWare (Σημείωση! Μπορεί να είναι διαφορετικό από το " "δικτυακό όνομα TCP/IP!), το όνομα του εκτυπωτή στον οποίο επιθυμείτε " "πρόσβαση, καθώς και\n" "οποιαδήποτε απαραίτητη πληροφορία περί χρήστη και κωδικού πρόσβασης." #: printer/printerdrake.pm:1451 #, c-format msgid "Printer Server" msgstr "Εξυπηρετητής Εκτυπώσεων" #: printer/printerdrake.pm:1452 #, c-format msgid "Print Queue Name" msgstr "Όνομα Ουράς Εκτυπωτή" #: printer/printerdrake.pm:1457 #, c-format msgid "NCP server name missing!" msgstr "Το όνομα του εξυπηρετητή NCP λείπει!" #: printer/printerdrake.pm:1461 #, c-format msgid "NCP queue name missing!" msgstr "Το όνομα της NCP ουράς λείπει!" #: printer/printerdrake.pm:1527 printer/printerdrake.pm:1547 #, c-format msgid ", host \"%s\", port %s" msgstr ", host \"%s\",θύρα %s" #: printer/printerdrake.pm:1530 printer/printerdrake.pm:1550 #, c-format msgid "Host \"%s\", port %s" msgstr "Host \"%s\", θύρα %s" #: printer/printerdrake.pm:1571 #, c-format msgid "TCP/Socket Printer Options" msgstr "Επιλογές εκτυπωτή TCP/Socket" #: printer/printerdrake.pm:1573 #, fuzzy, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "ανιχνεύθηκε εξ' ορισμού." #: printer/printerdrake.pm:1574 #, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Για να εκτυπώσετε σε έναν εκτυπωτή socket ή TCP , πρέπει να δώσετε το \n" "δικτυακό όνομα του εκτυπωτή και προαιρετικά τον αριθμό θύρας ( εξ ορισμού " "9100). Στους εξυπηρετητές HP JetDirect ή θύρα συνήθως είναι 9100, σε άλλους " "εξυπηρετητές ποικίλη. Δείτε το εγχειρίδιο χρήσης του υλικού σας." #: printer/printerdrake.pm:1578 #, c-format msgid "Printer host name or IP missing!" msgstr "Το δικτυακό όνομα του εκτυπωτή ή το IP λείπει!" #: printer/printerdrake.pm:1601 #, c-format msgid "Printer host name or IP" msgstr "Δικτυακό όνομα εκτυπωτή ή IP" #: printer/printerdrake.pm:1649 printer/printerdrake.pm:1651 #, c-format msgid "Printer Device URI" msgstr "Συσκευή εκτυπωτή URI" #: printer/printerdrake.pm:1650 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" "Μπορείτε να ορίσετε κατευθείαν το URI για την πρόσβαση στον εκτυπωτή. Το URI " "πρέπει να τηρεί είτε τις CUPS είτε τις Foomatic προδιαγραφές. Όχι πως δεν " "υποστηρίζονται όλοι οι URI τύποι από όλα τα spoolers." #: printer/printerdrake.pm:1668 #, c-format msgid "A valid URI must be entered!" msgstr "Ένα σωστό URI πρέπει να εισαχθεί!" #: printer/printerdrake.pm:1749 #, c-format msgid "Pipe into command" msgstr "Διασωλήνωση εργασίας σε εντολή" #: printer/printerdrake.pm:1750 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: printer/printerdrake.pm:1751 #, c-format msgid "Command line" msgstr "Γραμμή εντολών" #: printer/printerdrake.pm:1755 #, fuzzy, c-format msgid "A command line must be entered!" msgstr "Ένα σωστό URI πρέπει να εισαχθεί!" #: printer/printerdrake.pm:1788 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" "Είναι ο εκτυπωτής σας μια πολυχρηστική συσκευή από την HP ή την Sony " "(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet " "450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200;" #: printer/printerdrake.pm:1801 #, c-format msgid "Installing HPOJ package..." msgstr "Εγκατάσταση πακέτου HPOJ..." #: printer/printerdrake.pm:1809 printer/printerdrake.pm:1893 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "Έλεγχος και ρύθμιση της συσκευή HPOJ..." #: printer/printerdrake.pm:1831 #, c-format msgid "Installing SANE packages..." msgstr "Εγκατάσταση πακέτου SANE..." #: printer/printerdrake.pm:1858 #, c-format msgid "Installing mtools packages..." msgstr "Εγκατάσταση πακέτου mtools..." #: printer/printerdrake.pm:1873 #, c-format msgid "Scanning on your HP multi-function device" msgstr "Σάρωση στη πολυχρηστική συσκευή HP που διαθέτετε" #: printer/printerdrake.pm:1881 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: printer/printerdrake.pm:1930 #, c-format msgid "Making printer port available for CUPS..." msgstr "Γίνονται διαθέσιμες οι θύρες στο CUPS..." #: printer/printerdrake.pm:1939 printer/printerdrake.pm:2183 #: printer/printerdrake.pm:2327 #, c-format msgid "Reading printer database..." msgstr "Ανάγνωση βάσης δεδομένων εκτυπωτών..." #: printer/printerdrake.pm:2149 #, c-format msgid "Enter Printer Name and Comments" msgstr "Εισάγετε Όνομα Εκτυπωτή και Σχόλια" #: printer/printerdrake.pm:2153 printer/printerdrake.pm:3241 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" "Το όνομα του εκτυπωτή πρέπει να περιέχει μόνο γράμματα, αριθμούς και τον " "χαρακτήρα underscore" #: printer/printerdrake.pm:2159 printer/printerdrake.pm:3246 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" "Ο εκτυπωτής \"%s\" υπάρχει ήδη,\n" "Είστε βέβαιοι για την επικάλυψη των ρυθμίσεων;" #: printer/printerdrake.pm:2168 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" "Κάθε εκτυπωτής χρειάζεται ένα όνομα (π.χ. \"εκτυπωτής\").Τα πεδία Περιγραφή " "και Τοποθεσία δεν χρειάζεται να συμπληρωθούν. Είναι απλά σχόλια για τους " "χρήστες." #: printer/printerdrake.pm:2169 #, c-format msgid "Name of printer" msgstr "Όνομα εκτυπωτή" #: printer/printerdrake.pm:2170 standalone/drakconnect:521 #: standalone/harddrake2:40 standalone/printerdrake:212 #: standalone/printerdrake:219 #, c-format msgid "Description" msgstr "Περιγραφή" #: printer/printerdrake.pm:2171 standalone/printerdrake:212 #: standalone/printerdrake:219 #, c-format msgid "Location" msgstr "Τοποθεσία" #: printer/printerdrake.pm:2188 #, c-format msgid "Preparing printer database..." msgstr "Ανάγνωση βάσης δεδομένων εκτυπωτών..." #: printer/printerdrake.pm:2306 #, c-format msgid "Your printer model" msgstr "Το μοντέλο εκτυπωτή σας" #: printer/printerdrake.pm:2307 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" "Το Printerdrake συνέκρινε το όνομα του μοντέλου από τον αυτόματο εντοπισμό " "με τη λίστα των μοντέλων από την βάση δεδομένων εκτυπωτών για να την " "καλύτερη επιλογή. Αυτή η επιλογή μπορεί να είναι λάθος, ειδικά εάν ο " "εκτυπωτής σας δεν είναι καταχωρημένος στην βάση δεδομένων. Δείτε λοιπόν αν η " "επιλογή του εκτυπωτή είναι σωστή και κάντε κλικ στο \"Το μοντέλο είναι σωστό" "\" εάν όχι κάντε κλικ στο \"Επιλέξτε το μοντέλο χειροκίνητα\" για να " "επιλέξετε χειροκίνητα το μοντέλο από την επόμενη οθόνη\n" "Για τον εκτυπωτή σας το Printerdrake βρήκε:\n" "\n" "%s" #: printer/printerdrake.pm:2312 printer/printerdrake.pm:2315 #, c-format msgid "The model is correct" msgstr "Το μοντέλο είναι σωστό" #: printer/printerdrake.pm:2313 printer/printerdrake.pm:2314 #: printer/printerdrake.pm:2317 #, c-format msgid "Select model manually" msgstr "Επιλέξτε το μοντέλο χειροκίνητα" #: printer/printerdrake.pm:2340 #, fuzzy, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" "\n" "\n" " Printerdrake." #: printer/printerdrake.pm:2359 #, c-format msgid "Install a manufacturer-supplied PPD file" msgstr "" #: printer/printerdrake.pm:2390 #, c-format msgid "" "Every PostScript printer is delivered with a PPD file which describes the " "printer's options and features." msgstr "" #: printer/printerdrake.pm:2391 #, c-format msgid "" "This file is usually somewhere on the CD with the Windows and Mac drivers " "delivered with the printer." msgstr "" #: printer/printerdrake.pm:2392 #, c-format msgid "You can find the PPD files also on the manufacturer's web sites." msgstr "" #: printer/printerdrake.pm:2393 #, c-format msgid "" "If you have Windows installed on your machine, you can find the PPD file on " "your Windows partition, too." msgstr "" #: printer/printerdrake.pm:2394 #, c-format msgid "" "Installing the printer's PPD file and using it when setting up the printer " "makes all options of the printer available which are provided by the " "printer's hardware" msgstr "" #: printer/printerdrake.pm:2395 #, c-format msgid "" "Here you can choose the PPD file to be installed on your machine, it will " "then be used for the setup of your printer." msgstr "" #: printer/printerdrake.pm:2397 #, fuzzy, c-format msgid "Install PPD file from" msgstr "Εγκατάσταση rpm" #: printer/printerdrake.pm:2399 printer/printerdrake.pm:2406 #: standalone/scannerdrake:174 standalone/scannerdrake:182 #: standalone/scannerdrake:233 standalone/scannerdrake:240 #, fuzzy, c-format msgid "CD-ROM" msgstr "CDROM" #: printer/printerdrake.pm:2400 printer/printerdrake.pm:2408 #: standalone/scannerdrake:175 standalone/scannerdrake:184 #: standalone/scannerdrake:234 standalone/scannerdrake:242 #, fuzzy, c-format msgid "Floppy Disk" msgstr "Δισκέτα" #: printer/printerdrake.pm:2401 printer/printerdrake.pm:2410 #: standalone/scannerdrake:176 standalone/scannerdrake:186 #: standalone/scannerdrake:235 standalone/scannerdrake:244 #, fuzzy, c-format msgid "Other place" msgstr "Άλλες θύρες" #: printer/printerdrake.pm:2416 #, fuzzy, c-format msgid "Select PPD file" msgstr "Επιλέξτε αρχείο" #: printer/printerdrake.pm:2420 #, c-format msgid "The PPD file %s does not exist or is unreadable!" msgstr "" #: printer/printerdrake.pm:2426 #, c-format msgid "The PPD file %s does not conform with the PPD specifications!" msgstr "" #: printer/printerdrake.pm:2437 #, fuzzy, c-format msgid "Installing PPD file..." msgstr "Εγκατάσταση %s ..." #: printer/printerdrake.pm:2539 #, c-format msgid "OKI winprinter configuration" msgstr "Ρυθμίσεις OKI winprinter" #: printer/printerdrake.pm:2540 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" "Ρυθμίζετε έναν εκτυπωτή laser OKI winprinter. Αυτοί οι εκτυπωτές\n" "κάνουν χρήση ενός πολύ ειδικού πρωτοκόλλου επικοινωνίας και γι' αυτό " "λειτουργούν μόνο αν είναι συνδεμένοι στην πρώτη παράλληλη θύρα. Αν είναι " "συνδεμένος σε άλλη θύρα ή σε έναν εξυπηρετητή εκτυπώσεων παρακαλώ στην πρώτη " "παράλληλη πριν εκτυπώσετε την πρώτη δοκιμαστική σελίδα. Διαφορετικά ο " "εκτυπωτής δεν θα λειτουργήσει. Η ρυθμίσεις του τύπου σύνδεσης θα αγνοηθούν " "από τον οδηγό." #: printer/printerdrake.pm:2564 printer/printerdrake.pm:2593 #, c-format msgid "Lexmark inkjet configuration" msgstr "Ρυθμίσεις εκτυπωτή μελάνης Lexmark" #: printer/printerdrake.pm:2565 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" "Οι οδηγοί των εκτυπωτών μελάνης που παρέχονται από τη Lexmark υποστηρίζουν " "μόνο τοπικούς εκτυπωτές, δεν υποστηρίζουν εκτυπωτές σε απομακρυσμένους " "υπολογιστές ή εξυπηρετητές εκτυπώσεων. Παρακαλώ συνδέστε τον εκτυπωτή σας σε " "μια τοπική θύρα ή ρυθμίστε τον στο μηχάνημα που είναι συνδεδεμένος." #: printer/printerdrake.pm:2594 #, fuzzy, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "http://www.lexmark. Linux Άκυρο." #: printer/printerdrake.pm:2597 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: printer/printerdrake.pm:2710 #, fuzzy, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" "Εκτυπωτής εξ' ορισμού\n" "\n" " Υψηλό." #: printer/printerdrake.pm:2835 #, fuzzy, c-format msgid "Printer default settings" msgstr "Επιλογή μοντέλου εκτυπωτή" #: printer/printerdrake.pm:2842 #, c-format msgid "Option %s must be an integer number!" msgstr "Η επιλογή %s πρέπει να είναι ακέραιος αριθμός!" #: printer/printerdrake.pm:2846 #, c-format msgid "Option %s must be a number!" msgstr "Η επιλογή %s πρέπει να είναι αριθμός!" #: printer/printerdrake.pm:2850 #, c-format msgid "Option %s out of range!" msgstr "Επιλογή %s εκτός ορίου!" #: printer/printerdrake.pm:2901 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" "Θέλετε να ορίσετε αυτόν τον εκτυπωτή (\"%s\")\n" "σαν τον προεπιλεγμένο εκτυπωτή;" #: printer/printerdrake.pm:2916 #, c-format msgid "Test pages" msgstr "Δοκιμαστικές σελίδες" #: printer/printerdrake.pm:2917 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" "Παρακαλώ επιλέξτε τις δοκιμαστικές σελίδες που θα εκτυπωθούν.\n" "Σημ.: Η δοκιμαστική σελίδα φωτογραφίας μπορεί να διαρκέσει αρκετό χρόνο για " "να εκτυπωθεί και σε εκτυπωτές laser με μικρή μνήμη μπορεί και να μην " "εκτυπωθεί. Στις περισσότερες περιπτώσεις η εκτύπωση τις τυπικής δοκιμαστικής " "σελίδας αρκεί." #: printer/printerdrake.pm:2921 #, c-format msgid "No test pages" msgstr "Χωρίς δοκιμαστικές σελίδες" #: printer/printerdrake.pm:2922 #, c-format msgid "Print" msgstr "Εκτύπωση" #: printer/printerdrake.pm:2947 #, c-format msgid "Standard test page" msgstr "Τυπική δοκιμαστική σελίδα" #: printer/printerdrake.pm:2950 #, c-format msgid "Alternative test page (Letter)" msgstr "Εναλλακτική δοκιμαστική σελίδα (Letter)" #: printer/printerdrake.pm:2953 #, c-format msgid "Alternative test page (A4)" msgstr "Εναλλακτική δοκιμαστική σελίδα (A4)" #: printer/printerdrake.pm:2955 #, c-format msgid "Photo test page" msgstr "Δοκιμαστική σελίδα φωτογραφίας" #: printer/printerdrake.pm:2959 #, c-format msgid "Do not print any test page" msgstr "Χωρίς εκτύπωση δοκιμαστικής σελίδας" #: printer/printerdrake.pm:2967 printer/printerdrake.pm:3123 #, c-format msgid "Printing test page(s)..." msgstr "Εκτύπωση δοκιμαστικών σελίδων..." #: printer/printerdrake.pm:2992 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Μία ή περισσότερες δοκιμαστικές σελίδες στάλθηκαν στον εκτυπωτή.\n" "Μπορεί να περάσει κάποιος χρόνος μέχρι η εκτύπωση να ξεκινήσει.\n" "Κατάσταση εκτύπωσης:\n" "%s\n" "\n" #: printer/printerdrake.pm:2996 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Μία ή περισσότερες δοκιμαστικές σελίδες στάλθηκαν στον εκτυπωτή.\n" "Μπορεί να περάσει κάποιος χρόνος μέχρι η εκτύπωση να ξεκινήσει.\n" #: printer/printerdrake.pm:3003 #, c-format msgid "Did it work properly?" msgstr "Λειτούργησε σωστά;" #: printer/printerdrake.pm:3024 printer/printerdrake.pm:4192 #, c-format msgid "Raw printer" msgstr "Ακατέργαστος εκτυπωτής" #: printer/printerdrake.pm:3054 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" "Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) μπορείτε να " "κάνετε χρήση της εντολής \"%s <αρχείο>\" ή μπορείτε να κάνετε χρήση γραφικού " "εργαλείο εκτύπωσης: \"xpp <αρχείο>\" ή \" kprinter <αρχείο>\". Το γραφικό " "εργαλείο σας επιτρέπει να αλλάξετε εύκολα τις ρυθμίσεις επιλογών.\n" #: printer/printerdrake.pm:3056 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" "Τις εντολές αυτές μπορείτε επίσης να τις χρησιμοποιήσετε στο πεδίο \"Εντολή " "εκτυπώσεων\" των διαλόγων εκτυπώσεων σε πολλές εφαρμογές, αλλά μην παρέχετε " "το όνομα αρχείου εδώ επειδή το αρχείο προς εκτύπωση το παρέχει η εφαρμογή.\n" #: printer/printerdrake.pm:3059 printer/printerdrake.pm:3076 #: printer/printerdrake.pm:3086 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" "\n" "Η εντολή \"%s\" επίσης σας επιτρέπει να τροποποιήσετε τις ρυθμίσεις επιλογών " "για μια συγκεκριμένη εργασία εκτύπωσης. Απλά προσθέσετε τις επιθυμητές " "ρυθμίσεις στην γραμμή εντολών, π.χ. \"%s<αρχείο>\"." #: printer/printerdrake.pm:3062 printer/printerdrake.pm:3102 #, fuzzy, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" "Για να μάθετε περισσότερα για τις διαθέσιμες εντολές για τον τρέχον εκτυπωτή " "διαβάστε την λίστα που φαίνετε παρακάτω ή κάντε κλικ στο \"Εκτύπωση λίστας " "επιλογών\"%s%s\n" "\n" #: printer/printerdrake.pm:3066 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" "Αυτή είναι μια λίστα με τις διαθέσιμες επιλογές εκτύπωσης για τον τρέχον " "εκτυπωτή:\n" "\n" #: printer/printerdrake.pm:3071 printer/printerdrake.pm:3081 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" "Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) κάντε χρήση " "της εντολής \"%s <αρχείο>\".\n" #: printer/printerdrake.pm:3073 printer/printerdrake.pm:3083 #: printer/printerdrake.pm:3093 #, fuzzy, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "Εκτύπωση" #: printer/printerdrake.pm:3078 printer/printerdrake.pm:3088 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" "Για μια λίστα με τις διαθέσιμες εντολές για τον τρέχον εκτυπωτή κάντε κλικ " "στο πλήκτρο \"Εκτύπωση λίστας εντολών\"." #: printer/printerdrake.pm:3091 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" "Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) κάντε χρήση " "της εντολής \"%s <αρχείο>\" ή \"%s<αρχείο>\".\n" #: printer/printerdrake.pm:3095 #, fuzzy, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" "\n" " Εκτυπωτής" #: printer/printerdrake.pm:3099 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" "\n" " Επίσης οι εντολές \"%s\" και \"%s\" σας επιτρέπουν να ορίσετε τις ρυθμίσεις " "επιλογών για μια συγκεκριμένη εργασία εκτύπωσης. Απλά προσθέστε τις " "επιθυμητές ρυθμίσεις από την γραμμή εντολών, π.χ. \"%s <αρχείο>\".\n" #: printer/printerdrake.pm:3109 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Εκτύπωση/Σάρωση/Κάρτες Φωτογραφιών στο\"%s\"" #: printer/printerdrake.pm:3110 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Εκτύπωση/Σάρωση στο \"%s\"" #: printer/printerdrake.pm:3112 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Εκτύπωση/Πρόσβαση Κάρτας Φωτογραφιών στο \"%s\"" #: printer/printerdrake.pm:3113 #, c-format msgid "Printing on the printer \"%s\"" msgstr "Εκτύπωση στον εκτυπωτή \"%s\"" #: printer/printerdrake.pm:3116 printer/printerdrake.pm:3119 #: printer/printerdrake.pm:3120 printer/printerdrake.pm:3121 #: printer/printerdrake.pm:4179 standalone/drakTermServ:321 #: standalone/drakbackup:4583 standalone/drakbug:177 standalone/drakfont:497 #: standalone/drakfont:588 standalone/net_monitor:106 #: standalone/printerdrake:508 #, c-format msgid "Close" msgstr "Κλείσιμο" #: printer/printerdrake.pm:3119 #, c-format msgid "Print option list" msgstr "Εκτύπωση λίστα επιλογών" #: printer/printerdrake.pm:3140 #, fuzzy, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" "συσκευή\n" "\n" " Ολοκληρώθηκε συσκευή!" #: printer/printerdrake.pm:3163 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" "Ο εκτυπωτής ρυθμίστηκε αυτόματα για πρόσβαση στις κάρτες αποθήκευσης " "φωτογραφιών του από τον υπολογιστή σας. Μπορείτε να έχετε πρόσβαση σε αυτές " "χρησιμοποιώντας το γραφικό πρόγραμμα \"MtoolsFM\" (Μενού: \"Εφαρμογές\" -> " "\"Εργαλεία Αρχείων\" -> \"MTools File Manager\") ή την εντολή \"mtools" "\" (για περισσότερες πληροφορίες πληκτρολογήστε \"man mtools\" στη γραμμή " "εντολών). Θα βρείτε τις φωτογραφίες σας στον δίσκο \"p:\", ή σε δίσκους με " "τα επόμενα γράμματα αν έχετε περισσότερους από έναν εκτυπωτές HP με κάρτες " "αποθήκευσης φωτογραφιών. Σε αυτήν την περίπτωση, στο πρόγραμμα \"MtoolsFM\" " "μπορείτε να επιλέξετε μεταξύ των διαθέσιμων γραμμάτων δίσκου με το πεδίο " "στην άνω δεξιά γωνία του καταλόγου αρχείων." #: printer/printerdrake.pm:3185 printer/printerdrake.pm:3575 #, c-format msgid "Reading printer data..." msgstr "Ανάγνωση δεδομένων εκτυπωτή..." #: printer/printerdrake.pm:3205 printer/printerdrake.pm:3232 #: printer/printerdrake.pm:3267 #, c-format msgid "Transfer printer configuration" msgstr "Μεταφορά ρυθμίσεων εκτυπωτή" #: printer/printerdrake.pm:3206 #, fuzzy, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "Ολοκληρώθηκε Όλα εξ' ορισμού\n" #: printer/printerdrake.pm:3209 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: printer/printerdrake.pm:3211 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" "Το PDQ υποστηρίζει μόνο τοπικούς εκτυπωτές, Απομακρυσμένος εκτυπωτές LPD και " "εκτυπωτές Sockete/TCP.\n" #: printer/printerdrake.pm:3213 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "Το LPD και το LPRng δεν υποστηρίζουν εκτυπωτές IPP.\n" #: printer/printerdrake.pm:3215 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" "Επίσης εργασίες που δεν δημιουργήθηκαν με αυτό το πρόγραμμα ή το \"foomatic-" "configure\" δεν μπορούν να μεταφερθούν." #: printer/printerdrake.pm:3216 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" "Επίσης εκτυπωτές που έχουν ρυθμιστεί με αρχεία PPD που παρέχονται από τους " "κατασκευαστές τους ή με τοπικούς οδηγούς CUPS δεν μπορούν να μεταφερθούν." #: printer/printerdrake.pm:3217 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" "Επιλέξτε τους εκτυπωτές που θέλετε να μεταφέρετε και κάντε\n" "κλικ στο \"Μεταφορά\"." #: printer/printerdrake.pm:3220 #, c-format msgid "Do not transfer printers" msgstr "Χωρίς μεταφορά εκτυπωτών" #: printer/printerdrake.pm:3221 printer/printerdrake.pm:3237 #, c-format msgid "Transfer" msgstr "Μεταφορά" #: printer/printerdrake.pm:3233 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" "Ένας εκτυπωτής με το όνομα \"%s\" υπάρχει ήδη στο %s\n" "Κάντε κλικ στο \"Μεταφορά\" για να τον επικαλύψετε.\n" "Επίσης μπορείτε να του δώσετε ένα νέο όνομα ή να τον παραβλέψετε ." #: printer/printerdrake.pm:3254 #, c-format msgid "New printer name" msgstr "Κανένα όνομα εκτυπωτή" #: printer/printerdrake.pm:3257 #, c-format msgid "Transferring %s..." msgstr "Μεταφέρεται ο %s..." #: printer/printerdrake.pm:3268 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" "'Έχετε μεταφέρει τον πρώην προεπιλεγμένο εκτυπωτής σας (\"%s\"), Να είναι ο " "προεπιλεγμένος εκτυπωτής και στο νέο νέο σύστημα εκτύπωσης %s;" #: printer/printerdrake.pm:3278 #, c-format msgid "Refreshing printer data..." msgstr "Ανανέωση δεδομένων εκτυπωτή..." #: printer/printerdrake.pm:3287 #, c-format msgid "Starting network..." msgstr "Εκκίνηση δικτύου..." #: printer/printerdrake.pm:3328 printer/printerdrake.pm:3332 #: printer/printerdrake.pm:3334 #, c-format msgid "Configure the network now" msgstr "Ρύθμιση δικτύου τώρα" #: printer/printerdrake.pm:3329 #, c-format msgid "Network functionality not configured" msgstr "Η λειτουργικότητα του δικτύου δεν ρυθμίστηκε" #: printer/printerdrake.pm:3330 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" "Θα ρυθμίσετε έναν απομακρυσμένο εκτυπωτή. Αυτό απαιτεί ένα προσβάσιμο " "δίκτυο, αλλά το δίκτυο δεν έχει ρυθμιστεί ακόμα. Αν συνεχίσετε χωρίς να " "ρυθμίσετε το δίκτυο δεν θα μπορέσετε να κάνετε χρήση του εκτυπωτή που " "ρυθμίζετε. Τι θέλετε να κάνετε;" #: printer/printerdrake.pm:3333 #, c-format msgid "Go on without configuring the network" msgstr "Συνέχιση χωρίς την ρύθμιση του δικτύου" #: printer/printerdrake.pm:3367 #, fuzzy, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the %s Control Center, section " "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, " "also using the %s Control Center, section \"Hardware\"/\"Printer\"" msgstr "" "Η ρύθμιση δικτύου που έγινε κατά τη διάρκεια της εγκατάστασης δεν ήταν " "δυνατόν να εκκινηθεί. Παρακαλώ ελέγξτε εάν το δίκτυο είναι προσβάσιμο μετά " "την εκκίνηση και διορθώστε τις ρυθμίσεις με την χρήση του Κέντρου Ελέγχου " "της Mandrake, στο τμήμα \"Δίκτυο & Διαδίκτυο\" / \"Σύνδεση\" και μετά " "ρυθμίστε τον εκτυπωτή επίσης με το Κέντρο Ελέγχου Mandrake στο τμήμα \"Υλικό" "\"/\"Εκτυπωτής\"" #: printer/printerdrake.pm:3368 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" "Η πρόσβαση δικτύου δεν εκτελείτο και δεν μπόρεσε να εκκινηθεί. Παρακαλώ " "ελέγξτε την ρύθμιση του υλικού σας. Μετά προσπαθήστε να ρυθμίσετε τον " "απομακρυσμένο εκτυπωτή σας." #: printer/printerdrake.pm:3378 #, c-format msgid "Restarting printing system..." msgstr "Επανεκκίνηση του συστήματος εκτύπωσης..." #: printer/printerdrake.pm:3417 #, c-format msgid "high" msgstr "Υψηλό" #: printer/printerdrake.pm:3417 #, c-format msgid "paranoid" msgstr "Παρανοϊκό" #: printer/printerdrake.pm:3418 #, c-format msgid "Installing a printing system in the %s security level" msgstr "Εγκατάσταση συστήματος εκτύπωσης στο επίπεδο ασφάλειας %s" #: printer/printerdrake.pm:3419 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" "Πρόκειται να εγκαταστήσετε το σύστημα εκτύπωσης %s σε ένα σύστημα που έχει " "επίπεδο ασφαλείας %s\n" "\n" "Αυτό το σύστημα εκτύπωσης εκτελεί έναν δαίμονα (διεργασία στο φόντο) που " "περιμένει τις εργασίες εκτύπωσης και τις διαχειρίζεται. Αυτός ο δαίμονας " "είναι επίσης προσβάσιμος από ένα απομακρυσμένο μηχάνημα από το δίκτυο και " "επίσης είναι ένα εν δυνάμει σημείο επίθεσης. Για αυτό ένας περιορισμένος " "αριθμός δαιμόνων ξεκινά εξ ορισμού σε αυτό το επίπεδο ασφαλείας.\n" "\n" "Είστε βέβαιοι ότι θέλετε να ρυθμίσετε την εκτύπωση σε αυτό το μηχάνημα;" #: printer/printerdrake.pm:3453 #, c-format msgid "Starting the printing system at boot time" msgstr "Εκκίνηση του συστήματος εκτύπωσης κατά την εκκίνηση" #: printer/printerdrake.pm:3454 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" "Το σύστημα εκτύπωσης (%s) δεν θα ξεκινά αυτόματα κατά την εκκίνηση του " "μηχανήματος\n" "\n" "Υπάρχει η πιθανότητα να έχει απενεργοποιηθεί η αυτόματη εκκίνηση με την " "αλλαγή σε υψηλότερο επίπεδο ασφαλείας, επειδή το σύστημα εκτύπωσης είναι ένα " "εν δυνάμει σημείο επίθεσης\n" "\n" "Θέλετε να ξαναενεργοποιηθεί η αυτόματη εκκίνηση του συστήματος εκτύπωσης;" #: printer/printerdrake.pm:3475 printer/printerdrake.pm:3690 #, c-format msgid "Checking installed software..." msgstr "'Έλεγχος εγκατεστημένων προγραμμάτων..." #: printer/printerdrake.pm:3481 #, c-format msgid "Removing %s ..." msgstr "Αφαιρείται ο %s..." #: printer/printerdrake.pm:3488 #, c-format msgid "Installing %s ..." msgstr "Εγκατάσταση %s ..." #: printer/printerdrake.pm:3535 #, c-format msgid "Setting Default Printer..." msgstr "Ορισμός Προεπιλεγμένου Εκτυπωτή..." #: printer/printerdrake.pm:3555 #, c-format msgid "Select Printer Spooler" msgstr "Επιλογή Spooler Εκτυπωτή" #: printer/printerdrake.pm:3556 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Ποιο σύστημα εκτύπωσης θέλετε να χρησιμοποιήσετε;" #: printer/printerdrake.pm:3607 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Απέτυχε η ρύθμιση του εκτυπωτή \"%s\"!" #: printer/printerdrake.pm:3620 #, c-format msgid "Installing Foomatic..." msgstr "Εγκατάσταση Foomatic..." #: printer/printerdrake.pm:3806 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it. " msgstr "" "Oι παρακάτω εκτυπωτές έχουν ρυθμιστεί. Κάντε διπλό κλικ σε έναν εκτυπωτή για " "να αλλάξετε τις ρυθμίσεις του, να τον ορίσετε ως προεπιλεγμένο ή για να " "προβάλετε πληροφορίες για αυτόν." #: printer/printerdrake.pm:3834 #, fuzzy, c-format msgid "Display all available remote CUPS printers" msgstr "" "Ανανέωση λίστας εκτυπωτών ( για να εμφανίσει όλους τους διαθέσιμους " "απομακρυσμένους εκτυπωτές)" #: printer/printerdrake.pm:3835 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" "Ανανέωση λίστας εκτυπωτών ( για να εμφανίσει όλους τους διαθέσιμους " "απομακρυσμένους εκτυπωτές)" #: printer/printerdrake.pm:3845 #, c-format msgid "CUPS configuration" msgstr "Ρύθμιση CUPS" #: printer/printerdrake.pm:3857 #, c-format msgid "Change the printing system" msgstr "Αλλαγή συστήματος εκτύπωσης" #: printer/printerdrake.pm:3866 #, c-format msgid "Normal Mode" msgstr "Κανονική Κατάσταση" #: printer/printerdrake.pm:3867 #, c-format msgid "Expert Mode" msgstr "Για Προχωρημένους" #: printer/printerdrake.pm:4138 printer/printerdrake.pm:4193 #: printer/printerdrake.pm:4274 printer/printerdrake.pm:4284 #, c-format msgid "Printer options" msgstr "Επιλογές εκτυπωτή" #: printer/printerdrake.pm:4174 #, c-format msgid "Modify printer configuration" msgstr "Αλλαγή ρυθμίσεων εκτυπωτή" #: printer/printerdrake.pm:4176 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" "Εκτυπωτής %s\n" "Τι θέλετε να αλλάξετε σε αυτόν τον εκτυπωτή;" #: printer/printerdrake.pm:4180 #, c-format msgid "Do it!" msgstr "Καν' το!" #: printer/printerdrake.pm:4185 printer/printerdrake.pm:4243 #, c-format msgid "Printer connection type" msgstr "Τύπο σύνδεση εκτυπωτή" #: printer/printerdrake.pm:4186 printer/printerdrake.pm:4247 #, c-format msgid "Printer name, description, location" msgstr "Όνομα εκτυπωτή, περιγραφή, θέση" #: printer/printerdrake.pm:4188 printer/printerdrake.pm:4266 #, c-format msgid "Printer manufacturer, model, driver" msgstr "Κατασκευαστή εκτυπωτή, μοντέλο, οδηγό" #: printer/printerdrake.pm:4189 printer/printerdrake.pm:4267 #, c-format msgid "Printer manufacturer, model" msgstr "Κατασκευαστή εκτυπωτή, μοντέλο" #: printer/printerdrake.pm:4195 printer/printerdrake.pm:4278 #, c-format msgid "Set this printer as the default" msgstr "Ορισμός αυτού του εκτυπωτή ως προεπιλεγμένου" #: printer/printerdrake.pm:4197 printer/printerdrake.pm:4285 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "Προσθήκη αυτού του εκτυπωτή στο Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4198 printer/printerdrake.pm:4290 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "Αφαίρεση αυτού του εκτυπωτή από το Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4199 printer/printerdrake.pm:4295 #, c-format msgid "Print test pages" msgstr "Εκτύπωση δοκιμαστικών σελίδων" #: printer/printerdrake.pm:4200 printer/printerdrake.pm:4297 #, c-format msgid "Learn how to use this printer" msgstr "Μάθετε πως να χειρισθείτε αυτόν τον εκτυπωτή" #: printer/printerdrake.pm:4201 printer/printerdrake.pm:4299 #, c-format msgid "Remove printer" msgstr "Αφαίρεση εκτυπωτή" #: printer/printerdrake.pm:4255 #, c-format msgid "Removing old printer \"%s\"..." msgstr "Αφαίρεση παλαιού εκτυπωτή \"%s\"..." #: printer/printerdrake.pm:4286 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "Γίνεται προσθήκη του εκτυπωτή στο Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4288 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" "Ο εκτυπωτής \"%s\" προστέθηκε με επιτυχία στο Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4289 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" "Απέτυχε η προσθήκη του εκτυπωτή \"%s\" στο Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4291 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "Γίνεται αφαίρεση του εκτυπωτή από το Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4293 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" "Ο εκτυπωτής \"%s\" αφαιρέθηκε με επιτυχία από το Star Office/OpenOffice.org/" "GIMP" #: printer/printerdrake.pm:4294 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" "Απέτυχε η αφαίρεση του εκτυπωτή \"%s\" από το Star Office/OpenOffice.org/GIMP" #: printer/printerdrake.pm:4338 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Είστε βέβαιοι για την αφαίρεση του εκτυπωτή \"%s\";" #: printer/printerdrake.pm:4342 #, c-format msgid "Removing printer \"%s\"..." msgstr "Γίνεται αφαίρεση του εκτυπωτή \"%s\"..." #: printer/printerdrake.pm:4366 #, c-format msgid "Default printer" msgstr "Προεπιλεγμένος εκτυπωτής" #: printer/printerdrake.pm:4367 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "Ο εκτυπωτής \"%s\" είναι πλέον ο προεπιλεγμένος εκτυπωτής." #: raid.pm:37 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Δεν μπορώ να προσθέσω κατάτμηση στο _μορφοποιημένο_ RAID md%d" #: raid.pm:139 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "αποτυχία mkraid (μήπως απουσιάζουν τα raidtools;)" #: raid.pm:139 #, c-format msgid "mkraid failed" msgstr "αποτυχία mkraid" #: raid.pm:155 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Δεν υπάρχουν αρκετές κατατμήσεις για RAID επιπέδου %d\n" #: scanner.pm:96 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "" #: scanner.pm:102 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "" #: scanner.pm:109 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "" #: scanner.pm:188 standalone/scannerdrake:59 standalone/scannerdrake:63 #: standalone/scannerdrake:71 standalone/scannerdrake:333 #: standalone/scannerdrake:407 standalone/scannerdrake:451 #: standalone/scannerdrake:455 standalone/scannerdrake:477 #: standalone/scannerdrake:542 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:189 standalone/scannerdrake:903 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: scanner.pm:190 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "" #: security/help.pm:11 #, fuzzy, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" "\n" "\n" " Αποδοχή Άρνηση." #: security/help.pm:13 #, fuzzy, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" "\n" "\n" " Αποδοχή Άρνηση." #: security/help.pm:15 #, fuzzy, c-format msgid " Accept/Refuse icmp echo." msgstr "" "\n" "\n" " Αποδοχή Άρνηση." #: security/help.pm:17 #, c-format msgid "Allow/Forbid autologin." msgstr "" #: security/help.pm:19 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: security/help.pm:25 #, fuzzy, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" "\n" "\n" " χρήστης." #: security/help.pm:27 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "Όλα τα απομακρυσμένα μηχανήματα" #: security/help.pm:29 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "Όλα τα απομακρυσμένα μηχανήματα" #: security/help.pm:31 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: security/help.pm:33 #, fuzzy, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" "\n" "\n" " Ολοκληρώθηκε\n" "\n" "." #: security/help.pm:41 #, fuzzy, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "\n" "\n" "\n" " εξυπηρετητής." #: security/help.pm:44 #, fuzzy, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "\n" "\n" "\n" " κανένα\n" "." #: security/help.pm:54 #, fuzzy, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "\n" "\n" "\n" " εξυπηρετητής\n" " εξυπηρετητής εξυπηρετητής\n" "\n" "." #: security/help.pm:63 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: security/help.pm:68 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: security/help.pm:70 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: security/help.pm:73 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: security/help.pm:75 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: security/help.pm:77 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: security/help.pm:79 #, fuzzy, c-format msgid "Enable/Disable msec hourly security check." msgstr "" "\n" "\n" " ωριαία." #: security/help.pm:81 #, fuzzy, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" "\n" "\n" " Ομάδα εργασίας: χρήστης." #: security/help.pm:83 #, c-format msgid "Use password to authenticate users." msgstr "" #: security/help.pm:85 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: security/help.pm:87 #, fuzzy, c-format msgid " Activate/Disable daily security check." msgstr "" "\n" "\n" " καθημερινά." #: security/help.pm:89 #, fuzzy, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" "\n" "\n" " χρήστης επίπεδο." #: security/help.pm:91 #, fuzzy, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" "\n" "\n" " Προσθήκη." #: security/help.pm:93 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: security/help.pm:95 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: security/help.pm:97 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: security/help.pm:99 #, fuzzy, c-format msgid "Set the root umask." msgstr "Κωδικός Root" #: security/help.pm:100 #, c-format msgid "if set to yes, check open ports." msgstr "αν οριστεί ναι, έλεγχος για ανοιχτές θύρες." #: security/help.pm:101 #, fuzzy, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "αν οριστεί ναι, έλεγχος για κενούς κωδικούς πρόσβασης, για κανέναν κωδικό " "πρόσβασης στο /etc/shadow και για χρήστες με id 0 εκτός από τον root." #: security/help.pm:108 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "αν οριστεί ναι, έλεγχος δικαιωμάτων των αρχείων στον αρχικό κατάλογο χρήστη." #: security/help.pm:109 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "αν οριστεί ναι, έλεγχος των συσκευών δικτύου για αδιάκριτη κατάσταση " "λειτουργίας." #: security/help.pm:110 #, c-format msgid "if set to yes, run the daily security checks." msgstr "αν οριστεί ναι, εκτέλεση ελέγχων ασφαλείας καθημερινά." #: security/help.pm:111 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "αν οριστεί ναι, έλεγχος για προσθήκη/αφαίρεση αρχείων sgid." #: security/help.pm:112 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "αν οριστεί ναι, έλεγχος κενών κωδικών πρόσβασης στο /etc/shadow." #: security/help.pm:113 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "αν οριστεί ναι, επαλήθευση checksum για τα αρχεία suid/sgid." #: security/help.pm:114 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "αν οριστεί ναι, έλεγχος για προθέσεις/αφαιρέσεις αρχείων suid root." #: security/help.pm:115 #, c-format msgid "if set to yes, report unowned files." msgstr "αν οριστεί ναι, αναφορά άγνωστων αρχείων." #: security/help.pm:116 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "αν οριστεί ναι, έλεγχος των αρχείων/καταλόγων για εγγραφή από όλους." #: security/help.pm:117 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "αν οριστεί ναι, εκτέλεση ελέγχων chkrootkit" #: security/help.pm:118 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "αν ναι, αποστολή της αναφοράς ταχυδρομείου σε αυτήν την διεύθυνση ή αλλιώς " "στον root." #: security/help.pm:119 #, c-format msgid "if set to yes, report check result by mail." msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου μέσω ταχυδρομείου." #: security/help.pm:120 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "" #: security/help.pm:121 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "αν οριστεί ναι, έλεγχος της βάσης δεδομένων rpm." #: security/help.pm:122 #, c-format msgid "if set to yes, report check result to syslog." msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο syslog." #: security/help.pm:123 #, c-format msgid "if set to yes, reports check result to tty." msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο tty" #: security/help.pm:125 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: security/help.pm:127 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: security/help.pm:127 #, c-format msgid "Timeout unit is second" msgstr "" #: security/help.pm:129 #, fuzzy, c-format msgid "Set the user umask." msgstr "" "\n" "\n" " χρήστης." #: security/l10n.pm:11 #, fuzzy, c-format msgid "Accept bogus IPv4 error messages" msgstr "" "\n" "\n" " Αποδοχή Άρνηση." #: security/l10n.pm:12 #, fuzzy, c-format msgid "Accept broadcasted icmp echo" msgstr "" "\n" "\n" " Αποδοχή Άρνηση." #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "" #: security/l10n.pm:17 #, fuzzy, c-format msgid "Allow remote root login" msgstr "Όλα τα απομακρυσμένα μηχανήματα" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: security/l10n.pm:20 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "Σύνδεση Winmodem" #: security/l10n.pm:21 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: security/l10n.pm:22 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: security/l10n.pm:23 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "Ρύθμιση υπηρεσιών" #: security/l10n.pm:24 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: security/l10n.pm:25 #, c-format msgid "Syslog reports to console 12" msgstr "" #: security/l10n.pm:26 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: security/l10n.pm:27 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: security/l10n.pm:28 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: security/l10n.pm:29 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: security/l10n.pm:30 #, fuzzy, c-format msgid "Enable msec hourly security check" msgstr "" "\n" "\n" " ωριαία." #: security/l10n.pm:31 #, fuzzy, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" "\n" "\n" " Ομάδα εργασίας: χρήστης." #: security/l10n.pm:32 #, c-format msgid "Use password to authenticate users" msgstr "" #: security/l10n.pm:33 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: security/l10n.pm:34 #, c-format msgid "Daily security check" msgstr "" #: security/l10n.pm:35 #, fuzzy, c-format msgid "Sulogin(8) in single user level" msgstr "" "\n" "\n" " χρήστης επίπεδο." #: security/l10n.pm:36 #, fuzzy, c-format msgid "No password aging for" msgstr "Χωρίς κωδικό πρόσβασης" #: security/l10n.pm:37 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: security/l10n.pm:38 #, fuzzy, c-format msgid "Password history length" msgstr "Ο κωδικός πρόσβασης είναι πολύ απλός" #: security/l10n.pm:39 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: security/l10n.pm:40 #, fuzzy, c-format msgid "Root umask" msgstr "Κωδικός Root" #: security/l10n.pm:41 #, c-format msgid "Shell history size" msgstr "" #: security/l10n.pm:42 #, fuzzy, c-format msgid "Shell timeout" msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα" #: security/l10n.pm:43 #, fuzzy, c-format msgid "User umask" msgstr "Χρήστες" #: security/l10n.pm:44 #, fuzzy, c-format msgid "Check open ports" msgstr "ανιχνεύθηκε στην πόρτα %s" #: security/l10n.pm:45 #, c-format msgid "Check for unsecured accounts" msgstr "" #: security/l10n.pm:46 #, fuzzy, c-format msgid "Check permissions of files in the users' home" msgstr "" "αν οριστεί ναι, έλεγχος δικαιωμάτων των αρχείων στον αρχικό κατάλογο χρήστη." #: security/l10n.pm:47 #, fuzzy, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" "αν οριστεί ναι, έλεγχος των συσκευών δικτύου για αδιάκριτη κατάσταση " "λειτουργίας." #: security/l10n.pm:48 #, fuzzy, c-format msgid "Run the daily security checks" msgstr "αν οριστεί ναι, εκτέλεση ελέγχων ασφαλείας καθημερινά." #: security/l10n.pm:49 #, fuzzy, c-format msgid "Check additions/removals of sgid files" msgstr "αν οριστεί ναι, έλεγχος για προσθήκη/αφαίρεση αρχείων sgid." #: security/l10n.pm:50 #, fuzzy, c-format msgid "Check empty password in /etc/shadow" msgstr "αν οριστεί ναι, έλεγχος κενών κωδικών πρόσβασης στο /etc/shadow." #: security/l10n.pm:51 #, fuzzy, c-format msgid "Verify checksum of the suid/sgid files" msgstr "αν οριστεί ναι, επαλήθευση checksum για τα αρχεία suid/sgid." #: security/l10n.pm:52 #, fuzzy, c-format msgid "Check additions/removals of suid root files" msgstr "αν οριστεί ναι, έλεγχος για προθέσεις/αφαιρέσεις αρχείων suid root." #: security/l10n.pm:53 #, fuzzy, c-format msgid "Report unowned files" msgstr "αν οριστεί ναι, αναφορά άγνωστων αρχείων." #: security/l10n.pm:54 #, fuzzy, c-format msgid "Check files/directories writable by everybody" msgstr "αν οριστεί ναι, έλεγχος των αρχείων/καταλόγων για εγγραφή από όλους." #: security/l10n.pm:55 #, fuzzy, c-format msgid "Run chkrootkit checks" msgstr "αν οριστεί ναι, εκτέλεση ελέγχων chkrootkit" #: security/l10n.pm:56 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: security/l10n.pm:57 #, fuzzy, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "αν ναι, αποστολή της αναφοράς ταχυδρομείου σε αυτήν την διεύθυνση ή αλλιώς " "στον root." #: security/l10n.pm:58 #, fuzzy, c-format msgid "Report check result by mail" msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου μέσω ταχυδρομείου." #: security/l10n.pm:59 #, fuzzy, c-format msgid "Run some checks against the rpm database" msgstr "αν οριστεί ναι, έλεγχος της βάσης δεδομένων rpm." #: security/l10n.pm:60 #, fuzzy, c-format msgid "Report check result to syslog" msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο syslog." #: security/l10n.pm:61 #, fuzzy, c-format msgid "Reports check result to tty" msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Καλώς ορίσατε στους Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Φτωχό" #: security/level.pm:13 #, c-format msgid "High" msgstr "Υψηλό" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Υψηλότερο" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Παρανοϊκό" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Αυτό το επίπεδο πρέπει να χρησιμοποιηθεί με προσοχή. Κάνει το σύστημά σας\n" "πιο εύχρηστο, αλλά πολύ ευαίσθητο. Δεν πρέπει να χρησιμοποιηθεί σε σύστημα\n" "συνδεδεμένο στο Διαδίκτυο ή LAN. Δεν υπάρχουν κωδικοί πρόσβασης." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Τώρα υπάρχουν κωδικοί πρόσβασης, αλλά η χρήση του συστήματος σε δίκτυο ακόμα " "δεν συνίσταται." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Αυτό είναι το συνηθισμένο επίπεδο ασφαλείας για ένα σύστημα που θα συνδεθεί " "ως πελάτης στο Διαδίκτυο." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Υπάρχουν ήδη κάποιοι περιορισμοί, και περισσότεροι έλεγχοι εκτελούνται κάθε " "βράδυ." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Με αυτό το επίπεδο ασφαλείας είναι δυνατή η χρήση του συστήματος στο ως " "εξυπηρετητή.\n" "Η ασφάλεια είναι αρκετά υψηλή ώστε να δέχεται ταυτόχρονες συνδέσεις από " "πολλούς πελάτες.\n" "Σημ: Αν το μηχάνημα είναι μόνο για την χρήση ως πελάτη στο Διαδίκτυο τότε " "καλύτερα να επιλέξετε χαμηλότερο επίπεδο ασφάλειας" #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Η ασφάλεια είναι ίδια του προηγούμενου επιπέδου, με το σύστημα τελείως " "κλειστό. Η ασφάλεια είναι στο μέγιστο δυνατό." #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "Βασικές Επιλογές DrakSec" #: security/level.pm:56 #, c-format msgid "Please choose the desired security level" msgstr "Επιλέξτε το επιθυμητό επίπεδο ασφαλείας" #: security/level.pm:60 #, c-format msgid "Security level" msgstr "Επίπεδο ασφαλείας" #: security/level.pm:62 #, c-format msgid "Use libsafe for servers" msgstr "Χρήση libsafe για διακομιστές" #: security/level.pm:63 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: security/level.pm:64 #, c-format msgid "Security Administrator (login or email)" msgstr "Διαχειριστής Ασφαλείας (προσπέλαση ή ταχυδρομείο)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Εκκίνηση του ALSA (Advanced Linux Sound Architecture) συστήματος ήχου" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron, ένα πρόγραμμα περιοδικής εκτέλεσης εντολών." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "Το apmd παρακολουθεί και καταγράφει την κατάσταση της μπαταρίας.\n" "Μπορεί επίσης να χρησιμοποιηθεί για το αυτόματο κλείσιμο του συστήματος σε \n" "περίπτωση χαμηλής φόρτισης της μπαταρίας." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Εκτελεί εντολές προγραμματισμένες από την εντολή at και δέσμες εντολών\n" "όταν ο φόρτος του συστήματος είναι αρκετά χαμηλός." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "Το cron είναι μια βασική υπηρεσία UNIX που τρέχει εντολές καθορισμένες από \n" "τον χρήστη σε τακτά χρονικά διαστήματα. Το vixie cron προσθέτει έναν " "αριθμό \n" "επιπλέον δυνατοτήτων που περιλαμβάνουν καλύτερη ασφάλεια και πιο ισχυρές " "ρυθμίσεις." #: services.pm:28 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" #: services.pm:30 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "Το GPM προσθέτει υποστήριξη ποντικιού σε εφαρμογές βασισμένες σε κονσόλα\n" "κειμένου και επιτρέπει λειτουργίες αποκοπής και επικόλλησης με χρήση \n" "ποντικιού στην κονσόλα, καθώς και υποστήριξη αναδυομένων μενού." #: services.pm:33 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "Το HardDrake τρέχει μια ανίχνευση υλικού και προαιρετικά ρυθμίζει\n" "το νέο/αλλαγμένο υλικό." #: services.pm:35 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Ο Apache είναι ένας εξυπηρετητής WWW. Μπορεί να εξυπηρετήσει αρχεία\n" "HTML και CGI." #: services.pm:36 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Η υπηρεσία υπερεξυπηρετητή Διαδικτύου (inetd) ξεκινάει μια ποικιλία\n" "άλλων υπηρεσιών διαδικτύου όποτε χρειάζονται. Είναι υπεύθυνη για την \n" "εκκίνηση πολλών υπηρεσιών, όπως telnet, ftp, rsh και rlogin. Η " "απενεργοποίηση\n" "αυτής της υπηρεσίας απενεργοποιηθεί επίσης και τις υπηρεσίες για τις οποίες\n" "είναι υπεύθυνη." #: services.pm:40 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Εκκίνηση πακέτου φίλτρου για τον πυρήνα Linux της σειράς 2.2, για την " "ρύθμιση\n" "ενός Τοίχους Προστασίας που θα προστατεύει το μηχάνημά σας από δικτυακές " "επιθέσεις." #: services.pm:42 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Αυτό το πακέτο φορτώνει την επιλεγμένη διάταξη πληκτρολογίου που έχει \n" "επιλεγεί στο /etc/sysconfig/keyboard. Αυτό μπορεί να ρυθμιστεί με την \n" "χρήση του εργαλείου kbdconfig. Πρέπει σχεδόν πάντα να είναι ενεργοποιημένο." #: services.pm:45 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Αυτόματη παραγωγή της επικεφαλίδας του πυρήνα στο /boot για το\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:47 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" "Αυτόματη ανίχνευση και ρύθμιση συσκευών κατά την εκκίνηση του συστήματος." #: services.pm:48 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Το Linuxconf καμιά φορά κάνει διάφορες εργασίες\n" "κατά την εκκίνηση του συστήματος για να διατηρήσει τη ρύθμιση του συστήματος." #: services.pm:50 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "Το lpd είναι η υπηρεσία εκτυπώσεων που απαιτείται για να λειτουργεί \n" "η εντολή lpd. Είναι βασικά ένας εξυπηρετητής που προωθεί τα αρχεία \n" "στους εκτυπωτές." #: services.pm:52 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtual Server, χρησιμοποιείται για να δημιουργήσει έναν υψηλής\n" "απόδοσης και διαθεσιμότητας εξυπηρετητή." #: services.pm:54 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "Ο named (BIND) είναι ένας Εξυπηρετητής Ονόματος Τομέα (DNS) που " "χρησιμοποιείται\n" "για να μετατρέπει ονόματα σε διευθύνσεις IP." #: services.pm:55 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Συνδέει και αποσυνδέει όλα τα δικτυακά συστήματα αρχείων (NFS), SMB (Lan\n" "Manager/Windows), και NCP (NetWare) " #: services.pm:57 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Ενεργοποιεί/απενεργοποιεί όλα τα υποσυστήματα δικτύου που έχουν \n" "ρυθμιστεί να ξεκινούν κατά την εκκίνηση." #: services.pm:59 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "Το NFS είναι ένα δημοφιλές πρωτόκολλο για τον διαμοιρασμό αρχείων σε \n" "δίκτυα TCP/IP. Αυτή η υπηρεσία προσφέρει λειτουργίες εξυπηρετητή, ο \n" "οποίος ρυθμίζεται από το αρχείο /etc/exports." #: services.pm:62 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "Το NFS είναι ένα δημοφιλές πρωτόκολλο για τον διαμοιρασμό αρχείων σε \n" "δίκτυα TCP/IP. Αυτή η υπηρεσία προσφέρει λειτουργίες κλειδώματος αρχείων." #: services.pm:64 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" "Αυτόματη ενεργοποίηση του numlock πλήκτρου στην κονσόλα\n" "και το XFree κατά την εκκίνηση του συστήματος." #: services.pm:66 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Υποστήριξη των OKI 4w και συμβατών winprinters." #: services.pm:67 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "Η υποστήριξη PCMCIA προσφέρει υποστήριξη για κάρτες δικτύου, μόντεμ κλπ \n" "συνήθως σε συστήματα laptop. Δεν θα εκκινήσει εκτός αν αυτό ζητηθεί από " "τον \n" "χρήστη, οπότε είναι ασφαλές να εγκατασταθεί σε συστήματα που δεν το " "χρειάζονται." #: services.pm:70 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Ο portmapper διαχειρίζεται συνδέσεις RPC, οι οποίες χρησιμοποιούνται\n" "από πρωτόκολλα όπως το NFS και το NIS. Πρέπει να είναι ενεργοποιημένο σε \n" "συστήματα που δρουν ως εξυπηρετητές τέτοιων πρωτοκόλλων." #: services.pm:73 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Το postfix είναι ένα πρόγραμμα μεταφοράς αλληλογραφίας, το \n" "πρόγραμμα που φροντίζει για την μεταφορά αλληλογραφίας από το \n" "ένα σύστημα στο άλλο." #: services.pm:74 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Αποθηκεύει και επαναφέρει την πηγή εντροπίας του συστήματος για \n" "την δημιουργία καλύτερης ποιότητας τυχαίων αριθμών." #: services.pm:76 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Ορισμός raw συσκευών ως block συσκευών (όπως κατατμήσεις σκληρών\n" "δίσκων), για τη χρήση τους από εφαρμογές όπως η Oracle ή συσκευές DVD" #: services.pm:78 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Η υπηρεσία routed επιτρέπει την αυτόματη ενημέρωση του πίνακα δρομολόγησης \n" "IP μέσω του πρωτοκόλλου RIP. Παρ' όλο που το RIP είναι ευρέως διαδεδομένο " "σε \n" "μικρά δίκτυα, μεγαλύτερα δίκτυα απαιτούν περιπλοκότερα πρωτόκολλα." #: services.pm:81 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Το πρωτόκολλο rstat επιτρέπει στους χρήστες ενός δικτύου την\n" "συλλογή μετρήσεων επιδόσεων για οποιοδήποτε σύστημα σε αυτό \n" "το δίκτυο." #: services.pm:83 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Το πρωτόκολλο rusers επιτρέπει στους χρήστες ενός δικτύου να \n" "προσδιορίσουν τους συνδεδεμένους χρήστες άλλων συστημάτων." #: services.pm:85 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Το πρωτόκολλο rwho επιτρέπει σε απομακρυσμένους χρήστες να δουν έναν \n" "κατάλογο των χρηστών του συστήματος (παρόμοιο με το finger)." #: services.pm:87 #, c-format msgid "Launch the sound system on your machine" msgstr "Εκκίνηση του συστήματος ήχου στο μηχάνημά σας" #: services.pm:88 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Το Syslog είναι η υπηρεσία που χρησιμοποιούν πολλές άλλες υπηρεσίες \n" "για να κάνουν εγγραφές στα αρχεία παρακολούθησης συστήματος (log files)\n" "Συνίσταται η συνεχής λειτουργία αυτής της υπηρεσίας." #: services.pm:90 #, c-format msgid "Load the drivers for your usb devices." msgstr "Φόρτωση των οδηγών για τις usb συσκευές σας." #: services.pm:91 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" "Ξεκινάει την υπηρεσία εξυπηρετητή γραμματοσειρών X (αυτό είναι απαραίτητο " "για να εκτελεστεί το XFree)." #: services.pm:117 services.pm:159 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Επιλέξτε τις υπηρεσίες που θα ξεκινούν αυτόματα κατά την εκκίνηση" #: services.pm:129 #, c-format msgid "Printing" msgstr "Εκτύπωση" #: services.pm:130 #, c-format msgid "Internet" msgstr "Διαδίκτυο" #: services.pm:133 #, c-format msgid "File sharing" msgstr "Κοινόχρηστα αρχεία" #: services.pm:140 #, c-format msgid "Remote Administration" msgstr "Απομακρυσμένη διαχείριση" #: services.pm:148 #, c-format msgid "Database Server" msgstr "Εξυπηρετητής Βάσης Δεδομένων" #: services.pm:211 #, c-format msgid "running" msgstr "εκτελείται" #: services.pm:211 #, c-format msgid "stopped" msgstr "δεν εκτελείται" #: services.pm:215 #, c-format msgid "Services and deamons" msgstr "Υπηρεσίες και δαίμονες" #: services.pm:221 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Χωρίς επιπλέον πληροφορίες\n" "για αυτή την υπηρεσία." #: services.pm:226 ugtk2.pm:1139 #, c-format msgid "Info" msgstr "Πληροφορίες" #: services.pm:229 #, c-format msgid "Start when requested" msgstr "" #: services.pm:229 #, c-format msgid "On boot" msgstr "Στην εκκίνηση" #: services.pm:244 #, c-format msgid "Start" msgstr "Εκκίνηση" #: services.pm:244 #, c-format msgid "Stop" msgstr "Τερματισμός" #: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13 #: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13 #, fuzzy, c-format msgid "Congratulations for choosing Mandrake Linux!" msgstr "Σας ευχαριστούμε που επιλέξατε το Mandrake Linux 9.2" #: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15 #: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15 #, fuzzy, c-format msgid "Welcome to the Open Source world!" msgstr "Καλώς ορίσατε στον κόσμο του Ανοιχτού Κώδικα" #: share/advertising/dis-01.pl:17 #, c-format msgid "" "Your new Mandrake Linux operating system and its many applications is the " "result of collaborative efforts between MandrakeSoft developers and Mandrake " "Linux contributors throughout the world." msgstr "" #: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19 #: share/advertising/ppp-01.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development of this " "latest release." msgstr "" #: share/advertising/dis-02.pl:13 #, fuzzy, c-format msgid "Discovery" msgstr "Οδηγός" #: share/advertising/dis-02.pl:15 #, c-format msgid "" "Discovery is the easiest and most user-friendly Linux distribution. It " "includes a hand-picked selection of premium software for Office, Multimedia " "and Internet activities." msgstr "" #: share/advertising/dis-02.pl:17 #, c-format msgid "The menu is task-oriented, with a single selected application per task." msgstr "" #: share/advertising/dis-03.pl:13 #, c-format msgid "The KDE Choice" msgstr "" #: share/advertising/dis-03.pl:15 #, c-format msgid "" "The powerful Open Source graphical desktop environment KDE is the desktop of " "choice for the Discovery Pack." msgstr "" #: share/advertising/dis-04.pl:13 #, c-format msgid "OpenOffice.org: The complete Linux office suite." msgstr "" #: share/advertising/dis-04.pl:15 #, c-format msgid "" "WRITER is a powerful word processor for creating all types of text " "documents. Documents may include images, diagrams and tables." msgstr "" #: share/advertising/dis-04.pl:16 #, c-format msgid "" "CALC is a feature-packed spreadsheet which enables you to compute, " "analyze and manage all of your data." msgstr "" #: share/advertising/dis-04.pl:17 #, c-format msgid "" "IMPRESS is the fastest, most powerful way to create effective " "multimedia presentations." msgstr "" #: share/advertising/dis-04.pl:18 #, c-format msgid "" "DRAW will produce everything from simple diagrams to dynamic 3D " "illustrations." msgstr "" #: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13 #, fuzzy, c-format msgid "Surf The Internet" msgstr "Διαδίκτυο" #: share/advertising/dis-05.pl:15 #, c-format msgid "Discover the new integrated personal information suite KDE Kontact." msgstr "" #: share/advertising/dis-05.pl:17 #, c-format msgid "" "More than just a full-featured email client, Kontact also includes an " "address book, a calendar and scheduling program, plus a tool for taking " "notes!" msgstr "" #: share/advertising/dis-06.pl:15 #, c-format msgid "You can also:" msgstr "" #: share/advertising/dis-06.pl:16 #, c-format msgid "\t- browse the Web" msgstr "" #: share/advertising/dis-06.pl:17 #, c-format msgid "\t- chat" msgstr "" #: share/advertising/dis-06.pl:18 #, c-format msgid "\t- organize a video-conference" msgstr "" #: share/advertising/dis-06.pl:19 #, c-format msgid "\t- create your own Web site" msgstr "" #: share/advertising/dis-06.pl:20 #, c-format msgid "\t- ..." msgstr "" #: share/advertising/dis-07.pl:13 #, c-format msgid "Multimedia: Software for every need!" msgstr "" #: share/advertising/dis-07.pl:15 #, c-format msgid "Listen to audio CDs with KsCD." msgstr "" #: share/advertising/dis-07.pl:17 #, c-format msgid "Listen to music files and watch videos with Totem." msgstr "" #: share/advertising/dis-07.pl:19 #, c-format msgid "View and edit images and photos with GQview and The Gimp!" msgstr "" #: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13 #: share/advertising/pwp-07.pl:13 #, fuzzy, c-format msgid "Mandrake Control Center" msgstr "Κέντρο Ελέγχου Mandrake" #: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15 #: share/advertising/pwp-07.pl:15 #, c-format msgid "" "The Mandrake Control Center is an essential collection of Mandrake-specific " "utilities for simplifying the configuration of your computer." msgstr "" #: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17 #: share/advertising/pwp-07.pl:17 #, c-format msgid "" "You will immediately appreciate this collection of handy utilities for " "easily configuring hardware devices, defining mount points, setting up " "Network and Internet, adjusting the security level of your computer, and " "just about everything related to the system." msgstr "" #: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13 #: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13 #, fuzzy, c-format msgid "MandrakeStore" msgstr "Κέντρο Ελέγχου Mandrake" #: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15 #: share/advertising/pwp-08.pl:15 #, c-format msgid "" "Find all MandrakeSoft products and services at MandrakeStore -- our " "full service e-commerce platform." msgstr "" #: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19 #: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17 #, c-format msgid "Stop by today at www.mandrakestore.com" msgstr "" #: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13 #: share/advertising/pwp-09.pl:13 #, fuzzy, c-format msgid "Become a MandrakeClub member!" msgstr "Γίνετε MandrakeExpert" #: share/advertising/dis-10.pl:15 share/advertising/ppp-10.pl:15 #: share/advertising/pwp-09.pl:15 #, c-format msgid "" "Take advantage of valuable benefits, products and services by joining " "MandrakeClub, such as:" msgstr "" #: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16 #: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16 #, c-format msgid "\t- Full access to commercial applications" msgstr "" #: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17 #: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17 #, c-format msgid "\t- Special download mirror list exclusively for MandrakeClub Members" msgstr "" #: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18 #: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18 #, fuzzy, c-format msgid "\t- Voting for software to put in Mandrake Linux" msgstr "Σας ευχαριστούμε που επιλέξατε το Mandrake Linux 9.2" #: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19 #: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19 #, c-format msgid "\t- Special discounts for products and services at MandrakeStore" msgstr "" #: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20 #: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19 #: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21 #: share/advertising/pwp-09.pl:20 #, c-format msgid "\t- Plus much more" msgstr "" #: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22 #: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22 #, c-format msgid "For more information, please visit www.mandrakeclub.com" msgstr "" #: share/advertising/dis-11.pl:13 #, fuzzy, c-format msgid "Do you require assistance?" msgstr "Έχετε κάποιον προσαρμογέα %s;" #: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16 #: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15 #, c-format msgid "MandrakeExpert is the primary source for technical support." msgstr "" #: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18 #: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17 #, c-format msgid "" "If you have Linux questions, subscribe to MandrakeExpert at www." "mandrakeexpert.com" msgstr "" #: share/advertising/dwd-01.pl:17 #, c-format msgid "" "Mandrake Linux is committed to the Open Source Model and fully respects the " "General Public License. This new release is the result of collaboration " "between MandrakeSoft's team of developers and the worldwide community of " "Mandrake Linux contributors." msgstr "" #: share/advertising/dwd-02.pl:13 #, c-format msgid "Join the Mandrake Linux community!" msgstr "" #: share/advertising/dwd-02.pl:15 #, c-format msgid "" "If you would like to get involved, please subscribe to the \"Cooker\" " "mailing list by visiting mandrake-linux.com/cooker" msgstr "" #: share/advertising/dwd-02.pl:17 #, c-format msgid "" "To learn more about our dynamic community, please visit www.mandrake-" "linux.com!" msgstr "" #: share/advertising/dwd-03.pl:13 #, c-format msgid "What is Mandrake Linux?" msgstr "" #: share/advertising/dwd-03.pl:15 #, c-format msgid "" "Mandrake Linux is an Open Source distribution created with thousands of the " "choicest applications from the Free Software world. Mandrake Linux is one of " "the most widely used Linux distributions worldwide!" msgstr "" #: share/advertising/dwd-03.pl:17 #, c-format msgid "" "Mandrake Linux includes the famous graphical desktops KDE and GNOME, plus " "the latest versions of the most popular Open Source applications." msgstr "" #: share/advertising/dwd-04.pl:13 #, c-format msgid "" "Mandrake Linux is widely known as the most user-friendly and the easiest to " "install and easy to use Linux distribution." msgstr "" #: share/advertising/dwd-04.pl:15 #, c-format msgid "Find out about our Personal Solutions:" msgstr "" #: share/advertising/dwd-04.pl:16 #, c-format msgid "\t- Find out Mandrake Linux on a bootable CD with MandrakeMove" msgstr "" #: share/advertising/dwd-04.pl:17 #, c-format msgid "" "\t- If you use Linux mostly for Office, Internet and Multimedia tasks, " "Discovery perfectly meets your needs" msgstr "" #: share/advertising/dwd-04.pl:18 #, c-format msgid "" "\t- If you appreciate the largest selection of software including powerful " "development tools, PowerPack is for you" msgstr "" #: share/advertising/dwd-04.pl:19 #, c-format msgid "" "\t- If you require a full-featured Linux solution customized for small to " "medium-sized networks, choose PowerPack+" msgstr "" #: share/advertising/dwd-05.pl:13 #, c-format msgid "Find out also our Business Solutions!" msgstr "" #: share/advertising/dwd-05.pl:15 #, c-format msgid "" "Corporate Server: the ideal solution for entreprises. It is a " "complete \"all-in-one\" solution that includes everything needed to rapidly " "deploy world-class Linux server applications." msgstr "" #: share/advertising/dwd-05.pl:17 #, c-format msgid "" "Multi Network Firewall: based on Linux 2.4 \"kernel secure\" to " "provide multi-VPN as well as multi-DMZ functionalities. It is the perfect " "high performance security solution." msgstr "" #: share/advertising/dwd-05.pl:19 #, c-format msgid "" "MandrakeClustering: the power and speed of a Linux cluster combined " "with the stability and easy-of-use of the world-famous Mandrake Linux " "distribution. A unique blend for incomparable HPC performance." msgstr "" #: share/advertising/dwd-06.pl:15 #, c-format msgid "" "Find all MandrakeSoft products at MandrakeStore -- our full service e-" "commerce platform." msgstr "" #: share/advertising/dwd-06.pl:17 #, c-format msgid "" "Find out also support incidents if you have any problems, from standard to " "professional support, from 1 to 50 incidents, take the one which meets " "perfectly your needs!" msgstr "" #: share/advertising/dwd-07.pl:13 #, fuzzy, c-format msgid "Become a MandrakeClub member!" msgstr "Γίνετε MandrakeExpert" #: share/advertising/dwd-07.pl:15 #, c-format msgid "" "Take advantage of valuable benefits, products and services by joining " "Mandrake Club, such as:" msgstr "" #: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13 #: share/advertising/pwp-10.pl:13 #, fuzzy, c-format msgid "Do you require assistance?" msgstr "Έχετε κάποιον προσαρμογέα %s;" #: share/advertising/dwd-09.pl:16 #, c-format msgid "Note" msgstr "" #: share/advertising/dwd-09.pl:18 #, c-format msgid "This is the Mandrake Linux Download version." msgstr "" #: share/advertising/dwd-09.pl:20 #, c-format msgid "" "The free download version does not include commercial software, and " "therefore may not work with certain modems (such as some ADSL and RTC) and " "video cards (such as ATI® and NVIDIA®)." msgstr "" #: share/advertising/ppp-01.pl:17 #, c-format msgid "" "Your new Mandrake Linux distribution and its many applications are the " "result of collaborative efforts between MandrakeSoft developers and Mandrake " "Linux contributors throughout the world." msgstr "" #: share/advertising/ppp-02.pl:13 #, c-format msgid "PowerPack+" msgstr "" #: share/advertising/ppp-02.pl:15 #, c-format msgid "" "PowerPack+ is a full-featured Linux solution for small to medium-sized " "networks. PowerPack+ increases the value of the standard PowerPack by adding " "a comprehensive selection of world-class server applications." msgstr "" #: share/advertising/ppp-02.pl:17 #, c-format msgid "" "It is the only Mandrake Linux product that includes the groupware solution." msgstr "" #: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13 #, fuzzy, c-format msgid "Choose your graphical Desktop environment!" msgstr "Επιλέξτε το κλειδί κρυπτογράφησης του συστήματος αρχείων" #: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15 #, c-format msgid "" "When you log into your Mandrake Linux system for the first time, you can " "choose between several popular graphical desktops environments, including: " "KDE, GNOME, WindowMaker, IceWM, and others." msgstr "" #: share/advertising/ppp-04.pl:13 #, c-format msgid "" "In the Mandrake Linux menu you will find easy-to-use applications for all " "tasks:" msgstr "" #: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15 #, c-format msgid "\t- Create, edit and share office documents with OpenOffice.org" msgstr "" #: share/advertising/ppp-04.pl:16 #, c-format msgid "" "\t- Take charge of your personal data with the integrated personal " "information suites: Kontact and Evolution" msgstr "" #: share/advertising/ppp-04.pl:17 #, c-format msgid "\t- Browse the Web with Mozilla and Konqueror" msgstr "" #: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18 #, c-format msgid "\t- Participate in online chat with Kopete" msgstr "" #: share/advertising/ppp-04.pl:19 #, c-format msgid "" "\t- Listen to audio CDs and music files with KsCD and Totem" msgstr "" #: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20 #, c-format msgid "\t- Edit images and photos with The Gimp" msgstr "" #: share/advertising/ppp-05.pl:13 #, c-format msgid "" "PowerPack+ includes everything needed for developing and creating your own " "software, including:" msgstr "" #: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16 #, c-format msgid "" "\t- Kdevelop: a full featured, easy to use Integrated Development " "Environment for C++ programming" msgstr "" #: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17 #, c-format msgid "\t- GCC: the GNU Compiler Collection" msgstr "" #: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18 #, c-format msgid "\t- GDB: the GNU Project debugger" msgstr "" #: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16 #, c-format msgid "\t- Emacs: a customizable and real time display editor" msgstr "" #: share/advertising/ppp-05.pl:19 #, c-format msgid "" "\t- Xemacs: open source text editor and application development system" msgstr "" #: share/advertising/ppp-05.pl:20 #, c-format msgid "" "\t- Vim: advanced text editor with more features than standard Vi" msgstr "" #: share/advertising/ppp-06.pl:13 #, c-format msgid "Discover the full-featured groupware solution!" msgstr "" #: share/advertising/ppp-06.pl:15 #, c-format msgid "It includes both server and client features for:" msgstr "" #: share/advertising/ppp-06.pl:16 #, c-format msgid "\t- Sending and receiving emails" msgstr "" #: share/advertising/ppp-06.pl:17 #, c-format msgid "" "\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and " "receiving), Task Requests (sending and receiving)" msgstr "" #: share/advertising/ppp-06.pl:18 #, c-format msgid "\t- Address Book (server and client)" msgstr "" #: share/advertising/ppp-07.pl:13 #, c-format msgid "" "Empower your business network with premier server solutions including:" msgstr "" #: share/advertising/ppp-07.pl:15 #, c-format msgid "\t- Samba: File and print services for MS-Windows clients" msgstr "" #: share/advertising/ppp-07.pl:16 #, fuzzy, c-format msgid "\t- Apache: The most widely used Web server" msgstr "Εξυπηρετητής Apache World Wide Web" #: share/advertising/ppp-07.pl:17 #, c-format msgid "\t- MySQL: The world's most popular Open Source database" msgstr "" #: share/advertising/ppp-07.pl:18 #, c-format msgid "" "\t- CVS: Concurrent Versions System, the dominant open-source network-" "transparent version control system" msgstr "" #: share/advertising/ppp-07.pl:19 #, c-format msgid "" "\t- ProFTPD: the highly configurable GPL-licensed FTP server software" msgstr "" #: share/advertising/ppp-07.pl:20 #, c-format msgid "\t- And others" msgstr "" #: share/advertising/pwp-01.pl:17 #, c-format msgid "" "Your new Mandrake Linux distribution is the result of collaborative efforts " "between MandrakeSoft developers and Mandrake Linux contributors throughout " "the world." msgstr "" #: share/advertising/pwp-01.pl:19 #, c-format msgid "" "We would like to thank everyone who participated in the development of our " "latest release." msgstr "" #: share/advertising/pwp-02.pl:13 #, c-format msgid "PowerPack" msgstr "" #: share/advertising/pwp-02.pl:15 #, c-format msgid "" "PowerPack is MandrakeSoft's premier Linux desktop product. In addition to " "being the easiest and the most user-friendly Linux distribution, PowerPack " "includes thousands of applications - everything from the most popular to the " "most technical." msgstr "" #: share/advertising/pwp-04.pl:13 #, c-format msgid "" "In the Mandrake Linux menu you will find easy-to-use applications for all of " "your tasks:" msgstr "" #: share/advertising/pwp-04.pl:16 #, c-format msgid "" "\t- Take charge of your personal data with the integrated personal " "information suites Kontact and Evolution" msgstr "" #: share/advertising/pwp-04.pl:17 #, c-format msgid "\t- Browse the Web with Mozilla and Konqueror" msgstr "" #: share/advertising/pwp-04.pl:19 #, c-format msgid "\t- Listen to audio CDs and music files with KsCD and Totem" msgstr "" #: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13 #, fuzzy, c-format msgid "Development tools" msgstr "Ανάπτυξη" #: share/advertising/pwp-05.pl:15 #, c-format msgid "" "PowerPack includes everything needed for developing and creating your own " "software, including:" msgstr "" #: share/advertising/pwp-06.pl:15 #, c-format msgid "And of course the editors!" msgstr "" #: share/advertising/pwp-06.pl:17 #, c-format msgid "" "\t- Xemacs: another open source text editor and application " "development system" msgstr "" #: share/advertising/pwp-06.pl:18 #, c-format msgid "" "\t- Vim: an advanced text editor with more features than standard Vi" msgstr "" #: standalone.pm:21 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" "\n" " Γενικά Άδεια\n" "\n" "\n" "\n" "\n" "\n" "\n" " Γενικά Άδεια\n" "\n" " ληφθέντα Γενικά Άδεια\n" "\n" #: standalone.pm:40 #, fuzzy, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "εξ' ορισμού\n" " Επαναφορά\n" "\n" " εξ' ορισμού εξ' ορισμού\n" "\n" "\n" "\n" "\n" "\n" #: standalone.pm:52 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" #: standalone.pm:57 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: standalone.pm:63 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" #: standalone.pm:69 #, fuzzy, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "\n" "\n" "\n" "\n" "\n" "\n" "\n" " κανένα\n" "\n" "\n" "." #: standalone.pm:84 #, fuzzy, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "\n" " Εξυπηρετητής\n" " ενεργοποίηση ενεργοποίηση\n" " απενεργοποίηση απενεργοποίηση\n" "\n" "\n" " χρήστης\n" " Διαγραφή χρήστης\n" "\n" " Διαγραφή" #: standalone.pm:96 #, c-format msgid "[keyboard]" msgstr "[πληκτρολόγιο]" #: standalone.pm:97 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" #: standalone.pm:98 #, fuzzy, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" "\n" " Δίκτυο Διαδίκτυο\n" "\n" " εξ' ορισμού\n" "\n" "\n" " μετά βίας μετά βίας\n" "\n" "." #: standalone.pm:107 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #: standalone.pm:108 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: standalone.pm:113 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:114 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: standalone.pm:128 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Χρήση: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: standalone/XFdrake:87 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Παρακαλώ αποσυνδεθείτε και μετά πατήστε Ctrl-Alt-BackSpace" #: standalone/XFdrake:91 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: standalone/drakTermServ:71 #, c-format msgid "Useless without Terminal Server" msgstr "" #: standalone/drakTermServ:101 standalone/drakTermServ:108 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: standalone/drakTermServ:121 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: standalone/drakTermServ:128 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: standalone/drakTermServ:140 #, fuzzy, c-format msgid "You must be root to read configuration file. \n" msgstr "Δημιουργία Αντιγράφων Ασφαλείας από το αρχείο ρυθμίσεων" #: standalone/drakTermServ:219 standalone/drakTermServ:488 #: standalone/drakfont:572 #, c-format msgid "OK" msgstr "Εντάξει" #: standalone/drakTermServ:235 #, fuzzy, c-format msgid "Terminal Server Configuration" msgstr "Ρύθμιση του Διακομιστή Τερματικού Mandrake" #: standalone/drakTermServ:240 #, c-format msgid "DrakTermServ" msgstr "" #: standalone/drakTermServ:264 #, c-format msgid "Enable Server" msgstr "Ενεργοποίηση Εξυπηρετητή" #: standalone/drakTermServ:270 #, c-format msgid "Disable Server" msgstr "Απενεργοποίηση Εξυπηρετητή" #: standalone/drakTermServ:278 #, c-format msgid "Start Server" msgstr "Εκκίνηση Εξυπηρετητής" #: standalone/drakTermServ:284 #, c-format msgid "Stop Server" msgstr "Τερματισμός Εξυπηρετητή" #: standalone/drakTermServ:292 #, c-format msgid "Etherboot Floppy/ISO" msgstr "Etherboot Floppy/ISO" #: standalone/drakTermServ:296 #, c-format msgid "Net Boot Images" msgstr "Εικόνες Net Boot" #: standalone/drakTermServ:302 #, c-format msgid "Add/Del Users" msgstr "Προσθήκη/Αφαίρεση Χρηστών" #: standalone/drakTermServ:306 #, c-format msgid "Add/Del Clients" msgstr "Προσθήκη/Αφαίρεση Πελατών" #: standalone/drakTermServ:317 standalone/drakbug:54 #, c-format msgid "First Time Wizard" msgstr "Οδηγός Πρώτης Φοράς" #: standalone/drakTermServ:342 #, c-format msgid "" "\n" " This wizard routine will:\n" " \t1) Ask you to select either 'thin' or 'fat' clients.\n" "\t2) Setup dhcp.\n" "\t\n" "After doing these steps, the wizard will:\n" "\t\n" " a) Make all " "nbis. \n" " b) Activate the " "server. \n" " c) Start the " "server. \n" " d) Synchronize the shadow files so that all users, including root, \n" " are added to the shadow$$CLIENT$$ " "file. \n" " e) Ask you to make a boot floppy.\n" " f) If it's thin clients, ask if you want to restart KDM.\n" msgstr "" #: standalone/drakTermServ:387 #, fuzzy, c-format msgid "Cancel Wizard" msgstr "Κάντε κλικ εδώ για να ξεκινήσει ο οδηγός ->" #: standalone/drakTermServ:399 #, c-format msgid "Please save dhcpd config!" msgstr "" #: standalone/drakTermServ:427 #, c-format msgid "" "Please select client type.\n" " 'Thin' clients run everything off the server's CPU/RAM, using the client " "display.\n" " 'Fat' clients use their own CPU/RAM but the server's filesystem." msgstr "" #: standalone/drakTermServ:433 #, fuzzy, c-format msgid "Allow thin clients." msgstr "Προσθήκη/Αφαίρεση Πελατών" #: standalone/drakTermServ:441 #, c-format msgid "Creating net boot images for all kernels" msgstr "" #: standalone/drakTermServ:442 standalone/drakTermServ:725 #: standalone/drakTermServ:741 #, c-format msgid "This will take a few minutes." msgstr "Αυτό θα διαρκέσει μερικά λεπτά." #: standalone/drakTermServ:446 standalone/drakTermServ:466 #, fuzzy, c-format msgid "Done!" msgstr "Ολοκληρώθηκε" #: standalone/drakTermServ:452 #, c-format msgid "Syncing server user list with client list, including root." msgstr "" #: standalone/drakTermServ:472 #, c-format msgid "" "In order to enable changes made for thin clients, the display manager must " "be restarted. Restart now?" msgstr "" #: standalone/drakTermServ:507 #, c-format msgid "drakTermServ Overview" msgstr "" #: standalone/drakTermServ:508 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: standalone/drakTermServ:514 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: standalone/drakTermServ:532 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: standalone/drakTermServ:552 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: standalone/drakTermServ:564 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: standalone/drakTermServ:568 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: standalone/drakTermServ:573 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: standalone/drakTermServ:582 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: standalone/drakTermServ:603 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/floppyload.bin \\\n" " \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n" " \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0" msgstr "" #: standalone/drakTermServ:638 #, c-format msgid "Boot Floppy" msgstr "Δισκέτα Εκκίνησης" #: standalone/drakTermServ:640 #, c-format msgid "Boot ISO" msgstr "Εκκίνηση ISO" #: standalone/drakTermServ:642 #, fuzzy, c-format msgid "PXE Image" msgstr "Εικόνα" #: standalone/drakTermServ:723 #, c-format msgid "Build Whole Kernel -->" msgstr "Δημιουργία Ολόκληρου Πυρήνα -->" #: standalone/drakTermServ:730 #, c-format msgid "No kernel selected!" msgstr "Δεν επιλέχτηκε πυρήνας!" #: standalone/drakTermServ:733 #, c-format msgid "Build Single NIC -->" msgstr "Δημιουργία Μονού NIC -->" #: standalone/drakTermServ:737 #, c-format msgid "No NIC selected!" msgstr "Δε επιλέχτηκε NIC!" #: standalone/drakTermServ:740 #, fuzzy, c-format msgid "Build All Kernels -->" msgstr "Όλα" #: standalone/drakTermServ:747 #, c-format msgid "<-- Delete" msgstr "<-- Διαγραφή" #: standalone/drakTermServ:754 #, c-format msgid "Delete All NBIs" msgstr "Διαγραφή Όλων των NBIs" #: standalone/drakTermServ:841 #, fuzzy, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" "\n" " Εξυπηρετητής\n" " Διαγραφή χρήστης Εξυπηρετητής ενεργοποίηση." #: standalone/drakTermServ:846 #, c-format msgid "Add User -->" msgstr "Προσθήκη χρήστη -->" #: standalone/drakTermServ:852 #, c-format msgid "<-- Del User" msgstr "<-- Διαγραφή Χρήστη" #: standalone/drakTermServ:888 #, c-format msgid "type: %s" msgstr "τύπος: %s" #: standalone/drakTermServ:892 #, c-format msgid "local config: %s" msgstr "" #: standalone/drakTermServ:922 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "Αυτόματη επαναρύθμισης" #: standalone/drakTermServ:931 #, c-format msgid "No net boot images created!" msgstr "Δεν δημιουργήθηκαν εικόνες εκκίνησης δικτύου!" #: standalone/drakTermServ:949 #, fuzzy, c-format msgid "Thin Client" msgstr "Πελάτης DHCP" #: standalone/drakTermServ:953 #, fuzzy, c-format msgid "Allow Thin Clients" msgstr "Προσθήκη/Αφαίρεση Πελατών" #: standalone/drakTermServ:954 #, c-format msgid "Add Client -->" msgstr "Προσθήκη Πελάτη -->" #: standalone/drakTermServ:968 #, fuzzy, c-format msgid "type: fat" msgstr "τύπος: %s" #: standalone/drakTermServ:969 #, fuzzy, c-format msgid "type: thin" msgstr "τύπος: %s" #: standalone/drakTermServ:976 #, fuzzy, c-format msgid "local config: false" msgstr "Τοπικά αρχεία" #: standalone/drakTermServ:977 #, fuzzy, c-format msgid "local config: true" msgstr "δεν ρυθμίστηκε" #: standalone/drakTermServ:985 #, c-format msgid "<-- Edit Client" msgstr "<-- Επεξεργασία Πελάτη" #: standalone/drakTermServ:1011 #, c-format msgid "Disable Local Config" msgstr "" #: standalone/drakTermServ:1018 #, c-format msgid "Delete Client" msgstr "Διαγραφή Πελάτη" #: standalone/drakTermServ:1027 #, c-format msgid "dhcpd Config..." msgstr "Ρύθμιση dhcpd..." #: standalone/drakTermServ:1040 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" "Πρέπει να εκκινηθεί ξανά ο Διαχειριστής Προβολής για να ισχύσουν όλες οι " "αλλαγές. \n" "(από την κονσόλα - service dm restart)" #: standalone/drakTermServ:1084 #, c-format msgid "Subnet:" msgstr "" #: standalone/drakTermServ:1091 #, c-format msgid "Netmask:" msgstr "Μάσκα δικτύου:" #: standalone/drakTermServ:1098 #, c-format msgid "Routers:" msgstr "Δρομολογητές:" #: standalone/drakTermServ:1105 #, c-format msgid "Subnet Mask:" msgstr "" #: standalone/drakTermServ:1112 #, c-format msgid "Broadcast Address:" msgstr "Διεύθυνση Μετάδοσης:" #: standalone/drakTermServ:1119 #, c-format msgid "Domain Name:" msgstr "Όνομα Τομέα:" #: standalone/drakTermServ:1127 #, c-format msgid "Name Servers:" msgstr "Όνομα Εξυπηρετητών:" #: standalone/drakTermServ:1138 #, c-format msgid "IP Range Start:" msgstr "Όριο Εκκίνησης ΙΡ:" #: standalone/drakTermServ:1139 #, c-format msgid "IP Range End:" msgstr "Όριο Τερματισμού IP:" #: standalone/drakTermServ:1191 #, c-format msgid "dhcpd Server Configuration" msgstr "Ρυθμίσεις Εξυπηρετητή dhcpd" #: standalone/drakTermServ:1192 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" "Οι περισσότερες τιμές έχουν εξαχθεί \n" "από το σύστημά σας\n" "Αλλάξτε τις αν χρειάζεται." #: standalone/drakTermServ:1195 #, fuzzy, c-format msgid "Dynamic IP Address Pool:" msgstr "Διεύθυνση:" #: standalone/drakTermServ:1208 #, c-format msgid "Write Config" msgstr "Εγγραφή Ρύθμισης" #: standalone/drakTermServ:1326 #, c-format msgid "Please insert floppy disk:" msgstr "Παρακαλώ εισάγετε δισκέτα Εκκίνησης:" #: standalone/drakTermServ:1330 #, c-format msgid "Couldn't access the floppy!" msgstr "Δεν είναι δυνατή η πρόσβαση στη δισκέτα!" #: standalone/drakTermServ:1332 #, c-format msgid "Floppy can be removed now" msgstr "Τώρα μπορείτε να αφαιρέστε τη δισκέτα" #: standalone/drakTermServ:1335 #, c-format msgid "No floppy drive available!" msgstr "Δεν υπάρχει διαθέσιμος οδηγός δισκέτας!" #: standalone/drakTermServ:1340 #, fuzzy, c-format msgid "PXE image is %s/%s" msgstr "Η εικόνα Etherboot ISO είναι η %s" #: standalone/drakTermServ:1342 #, fuzzy, c-format msgid "Error writing %s/%s" msgstr "Σφάλμα εγγραφής στο αρχείο %s" #: standalone/drakTermServ:1351 #, c-format msgid "Etherboot ISO image is %s" msgstr "Η εικόνα Etherboot ISO είναι η %s" #: standalone/drakTermServ:1353 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "Κάτι δεν πήγε καλά! Είναι το mkisofs εγκατεστημένο;" #: standalone/drakTermServ:1372 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "Πρέπει να δημιουργήσω πρώτα το /etc/dhcpd.conf!" #: standalone/drakTermServ:1533 #, c-format msgid "%s passwd bad in Terminal Server - rewriting...\n" msgstr "" #: standalone/drakTermServ:1551 #, fuzzy, c-format msgid "%s is not a user..\n" msgstr "το %s δεν ανταποκρίνεται" #: standalone/drakTermServ:1552 #, c-format msgid "%s is already a Terminal Server user\n" msgstr "" #: standalone/drakTermServ:1554 #, c-format msgid "Addition of %s to Terminal Server failed!\n" msgstr "" #: standalone/drakTermServ:1556 #, c-format msgid "%s added to Terminal Server\n" msgstr "" #: standalone/drakTermServ:1608 #, fuzzy, c-format msgid "Deleted %s...\n" msgstr "Βρέθηκε ο %s" #: standalone/drakTermServ:1610 standalone/drakTermServ:1687 #, fuzzy, c-format msgid "%s not found...\n" msgstr "το %s δεν ανταποκρίνεται" #: standalone/drakTermServ:1632 standalone/drakTermServ:1633 #: standalone/drakTermServ:1634 #, c-format msgid "%s already in use\n" msgstr "" #: standalone/drakTermServ:1658 #, fuzzy, c-format msgid "Can't open %s!" msgstr "Δεν βρέθηκε το %s στο %s" #: standalone/drakTermServ:1715 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" "το /etc/hosts.allow και /etc/hosts.deny έχουν ήδη ρυθμιστεί - δεν " "μετατράπηκαν" #: standalone/drakTermServ:1872 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: standalone/drakautoinst:37 #, c-format msgid "Error!" msgstr "Σφάλμα!" #: standalone/drakautoinst:38 #, c-format msgid "I can't find needed image file `%s'." msgstr "Δεν μπορώ να βρω το απαραίτητο αρχείο εικόνας `%s'." #: standalone/drakautoinst:40 #, c-format msgid "Auto Install Configurator" msgstr "Ρυθμίσεις αυτόματης εγκατάστασης" #: standalone/drakautoinst:41 #, fuzzy, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Press ok to continue." msgstr "" "Εγκατάσταση\n" "\n" " Επαναφόρτωση\n" "\n" "\n" "\n" " Ολοκληρώθηκε?" #: standalone/drakautoinst:59 #, c-format msgid "replay" msgstr "επανάληψη" #: standalone/drakautoinst:59 standalone/drakautoinst:68 #, c-format msgid "manual" msgstr "χειροκίνητα" #: standalone/drakautoinst:63 #, c-format msgid "Automatic Steps Configuration" msgstr "Ρύθμιση Αυτόματων Βημάτων" #: standalone/drakautoinst:64 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" "Παρακαλώ καθορίστε εάν για κάθε βήμα θα γίνει επανάληψη της εγκατάστασης, ή " "εάν γίνει χειροκίνητα" #: standalone/drakautoinst:76 standalone/drakautoinst:77 #, c-format msgid "Creating auto install floppy" msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης" #: standalone/drakautoinst:141 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" "\n" " Καλώς Ορίσατε\n" "\n" "Οι παράμετροι για την αυτόματη εγκατάσταση υπάρχουν στα τμήματα αριστερά" #: standalone/drakautoinst:235 standalone/drakgw:583 standalone/drakvpn:898 #: standalone/scannerdrake:367 #, c-format msgid "Congratulations!" msgstr "Συγχαρητήρια!" #: standalone/drakautoinst:236 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" "Η δισκέτα δημιουργήθηκε με επιτυχία.\n" "Μπορείτε τώρα να επαναλάβετε την εγκατάσταση." #: standalone/drakautoinst:272 #, c-format msgid "Auto Install" msgstr "Αυτόματη εγκατάσταση" #: standalone/drakautoinst:341 #, c-format msgid "Add an item" msgstr "Προσθήκη στοιχείου" #: standalone/drakautoinst:348 #, c-format msgid "Remove the last item" msgstr "Αφαίρεση του τελευταίου στοιχείου" #: standalone/drakbackup:87 #, fuzzy, c-format msgid "hd" msgstr "Τσαντ" #: standalone/drakbackup:87 #, fuzzy, c-format msgid "tape" msgstr "Ταινία" #: standalone/drakbackup:158 #, fuzzy, c-format msgid "No devices found" msgstr "Δεν βρέθηκε εικόνα" #: standalone/drakbackup:196 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: standalone/drakbackup:197 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: standalone/drakbackup:198 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: standalone/drakbackup:199 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: standalone/drakbackup:200 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: standalone/drakbackup:201 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: standalone/drakbackup:202 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: standalone/drakbackup:203 #, c-format msgid "" "This should be a local user or email addresse that you want the backup " "results sent to. You will need to define a functioning mail server." msgstr "" #: standalone/drakbackup:204 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: standalone/drakbackup:205 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: standalone/drakbackup:206 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: standalone/drakbackup:207 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: standalone/drakbackup:604 #, fuzzy, c-format msgid "Interval cron not available as non-root" msgstr "Το cron δεν είναι ακόμα διαθέσιμη στους μη-root" #: standalone/drakbackup:715 standalone/logdrake:415 #, c-format msgid "\"%s\" neither is a valid email nor is an existing local user!" msgstr "" #: standalone/drakbackup:719 standalone/logdrake:420 #, c-format msgid "" "\"%s\" is a local user, but you did not select a local smtp, so you must use " "a complete email address!" msgstr "" #: standalone/drakbackup:728 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: standalone/drakbackup:730 #, fuzzy, c-format msgid "Old user list:\n" msgstr "" "\n" "- Αρχεία Χρηστών:\n" #: standalone/drakbackup:732 #, fuzzy, c-format msgid "New user list:\n" msgstr "" "\n" "- Αρχεία Χρηστών:\n" #: standalone/drakbackup:779 #, fuzzy, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" "\n" " Αναφορά DrakBackup \n" "\n" #: standalone/drakbackup:780 #, fuzzy, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" "\n" " Δαίμονας αναφοράς DrakBackup \n" "\n" "\n" #: standalone/drakbackup:786 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" "\n" " DrakBackup Λεπτομέρειες Αναφοράς\n" "\n" "\n" #: standalone/drakbackup:810 standalone/drakbackup:883 #: standalone/drakbackup:939 #, fuzzy, c-format msgid "Total progress" msgstr "Συνολική πρόοδος" #: standalone/drakbackup:865 #, c-format msgid "" "%s exists, delete?\n" "\n" "If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: standalone/drakbackup:874 #, c-format msgid "This may take a moment to generate the keys." msgstr "" "Μπορεί να χρειαστούν μερικά λεπτά για τη δημιουργία των κλειδιών:To ../../" "standalone/drakbackup:1" #: standalone/drakbackup:881 #, fuzzy, c-format msgid "Cannot spawn %s." msgstr "Δεν βρέθηκε το %s στο %s" #: standalone/drakbackup:898 #, c-format msgid "No password prompt on %s at port %s" msgstr "Χωρίς ερώτηση κωδικού στο %s στη θύρα %s" #: standalone/drakbackup:899 #, c-format msgid "Bad password on %s" msgstr "Εσφαλμένος κωδικός στο %s" #: standalone/drakbackup:900 #, c-format msgid "Permission denied transferring %s to %s" msgstr "Άρνηση πρόσβασης κατά τη μεταφορά του %s στο %s" #: standalone/drakbackup:901 #, c-format msgid "Can't find %s on %s" msgstr "Δεν βρέθηκε το %s στο %s" #: standalone/drakbackup:904 #, c-format msgid "%s not responding" msgstr "το %s δεν ανταποκρίνεται" #: standalone/drakbackup:908 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" "Επιτυχής μεταφορά\n" "Ίσως να χρειαστεί να επαληθεύσετε ότι μπορείτε να προσπελάσετε τον " "διακομιστή με:\n" "\n" "ssh -i %s %s@%s\n" "\n" "χωρίς να ζητηθεί κωδικός πρόσβασης." #: standalone/drakbackup:953 #, c-format msgid "WebDAV remote site already in sync!" msgstr "Το απομακρυσμένο WebDAV είναι ήδη σε συγχρονισμό!" #: standalone/drakbackup:957 #, c-format msgid "WebDAV transfer failed!" msgstr "Η μεταφορά WebDAV απέτυχε!" #: standalone/drakbackup:978 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "Δεν υπάρχει CDR/DVDR στον οδηγό!" #: standalone/drakbackup:982 #, c-format msgid "Does not appear to be recordable media!" msgstr "Φαίνεται να μην είναι εγγράψιμο μέσο!" #: standalone/drakbackup:986 #, c-format msgid "Not erasable media!" msgstr "Το μέσο δεν μπορεί να σβηστεί!" #: standalone/drakbackup:1027 #, c-format msgid "This may take a moment to erase the media." msgstr "Ίσως χρειαστούν μερικά λεπτά για να σβηστεί το μέσο." #: standalone/drakbackup:1103 #, c-format msgid "Permission problem accessing CD." msgstr "Πρόβλημα δικαιωμάτων στην πρόσβαση του CD." #: standalone/drakbackup:1130 #, c-format msgid "No tape in %s!" msgstr "Καμιά ταινία στο %s!" #: standalone/drakbackup:1232 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: standalone/drakbackup:1251 standalone/drakbackup:1305 #, c-format msgid "Backup system files..." msgstr "Αντίγραφο Ασφαλείας συστήματος αρχείων..." #: standalone/drakbackup:1306 standalone/drakbackup:1368 #, c-format msgid "Hard Disk Backup files..." msgstr "Αντίγραφα Ασφαλείας Σκληρού Δίσκου" #: standalone/drakbackup:1367 #, c-format msgid "Backup User files..." msgstr "Αντίγραφο Ασφαλείας των αρχείων Χρηστών..." #: standalone/drakbackup:1421 #, c-format msgid "Backup Other files..." msgstr "Αντίγραφο Ασφαλείας Άλλων αρχείων..." #: standalone/drakbackup:1422 #, c-format msgid "Hard Disk Backup Progress..." msgstr "Διαδικασία Αντιγράφων ασφαλείας στον Σκληρό Δίσκο..." #: standalone/drakbackup:1427 #, c-format msgid "No changes to backup!" msgstr "Δεν υπάρχουν αλλαγές για να γίνουν αντίγραφα ασφαλείας!" #: standalone/drakbackup:1445 standalone/drakbackup:1469 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" "\n" "Δραστηριότητες Drakbackup μέσω %s:\n" "\n" #: standalone/drakbackup:1454 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" " Σφάλμα στη σύνδεση FTP . Δεν ήταν δυνατή η αποστολή των αντιγράφων " "ασφαλείας μέσω FTP.\n" #: standalone/drakbackup:1455 #, fuzzy, c-format msgid "" "Error during sending file via FTP. Please correct your FTP configuration." msgstr "" "Σφάλμα κατά την αποστολή αρχείου μέσω FTP.\n" "Παρακαλώ διορθώστε τη ρύθμιση του FTP." #: standalone/drakbackup:1457 #, fuzzy, c-format msgid "file list sent by FTP: %s\n" msgstr "" "αποστολή λίστας αρχείων μέσω FTP: %s\n" " " #: standalone/drakbackup:1474 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" "Δραστηριότητες Drakbackup μέσω CD:\n" "\n" #: standalone/drakbackup:1479 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" "Δραστηριότητες Drakbackup μέσω ταινίας:\n" "\n" #: standalone/drakbackup:1488 #, fuzzy, c-format msgid "Error sending mail. Your report mail was not sent." msgstr "" "Σφάλμα στο sendmail\n" " Η αναφορά δεν στάλθηκε\n" " παρακαλώ ρυθμίστε το sendmail" #: standalone/drakbackup:1489 #, c-format msgid " Error while sending mail. \n" msgstr "Σφάλμα κατά την αποστολή μηνύματος. \n" #: standalone/drakbackup:1518 #, c-format msgid "Can't create catalog!" msgstr "Αδύνατη η δημιουργία καταλόγου!" #: standalone/drakbackup:1639 #, fuzzy, c-format msgid "Can't create log file!" msgstr "Αδύνατη η δημιουργία καταλόγου!" #: standalone/drakbackup:1656 standalone/drakbackup:1667 #: standalone/drakfont:584 #, c-format msgid "File Selection" msgstr "Επιλογή Αρχείου" #: standalone/drakbackup:1695 #, fuzzy, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" "Παρακαλώ επιλέξτε τα αρχεία ή τους καταλόγους και κάντε κλικ στο 'προσθήκη'" #: standalone/drakbackup:1723 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" "\n" "Παρακαλώ επιλέξτε όλες τις επιλογές που χρειάζεστε.\n" #: standalone/drakbackup:1724 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" "Αυτές οι επιλογές μπορούν να πάρουν αντίγραφα ασφαλείας και να επαναφέρουν " "το /etc\n" #: standalone/drakbackup:1725 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "Αντίγραφο ασφαλείας των αρχείων Συστήματος (κατάλογος /etc )" #: standalone/drakbackup:1726 standalone/drakbackup:1790 #: standalone/drakbackup:1856 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: standalone/drakbackup:1728 standalone/drakbackup:1792 #: standalone/drakbackup:1858 #, c-format msgid "Use Incremental Backups" msgstr "" #: standalone/drakbackup:1728 standalone/drakbackup:1792 #: standalone/drakbackup:1858 #, c-format msgid "Use Differential Backups" msgstr "" #: standalone/drakbackup:1730 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "Χωρίς τα κρίσιμα αρχεία ( κωδικοί, ομάδες, fstab)" #: standalone/drakbackup:1731 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" "Με αυτή την επιλογή θα μπορείτε να επαναφέρετε οποιαδήποτε\n" "έκδοση του καταλόγου /etc." #: standalone/drakbackup:1762 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" "Παρακαλώ επιλέξτε όσους χρήστες θέλετε να υπάρχουν στα αντίγραφα ασφαλείας" #: standalone/drakbackup:1789 #, c-format msgid "Do not include the browser cache" msgstr "Χωρίς την cache του περιηγητή" #: standalone/drakbackup:1844 standalone/drakfont:650 #, c-format msgid "Remove Selected" msgstr "Αφαίρεση Επιλεγμένων" #: standalone/drakbackup:1891 standalone/drakbackup:1895 #, c-format msgid "Under Devel ... please wait." msgstr "Υπό Ανάπτυξη ... παρακαλώ περιμένετε." #: standalone/drakbackup:1909 #, c-format msgid "Windows (FAT32)" msgstr "Windows (FAT32)" #: standalone/drakbackup:1942 #, c-format msgid "Users" msgstr "Χρήστες" #: standalone/drakbackup:1961 #, c-format msgid "Use network connection to backup" msgstr "Χρήση σύνδεση δικτύου για τα αρχεία ασφαλείας" #: standalone/drakbackup:1963 #, c-format msgid "Net Method:" msgstr "Μέθοδος δικτύου:" #: standalone/drakbackup:1967 #, c-format msgid "Use Expect for SSH" msgstr "" #: standalone/drakbackup:1968 #, fuzzy, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" "Δημιουργία/Μεταφορά\n" "αντιγράφων ασφαλείας των κλειδιών SSH" #: standalone/drakbackup:1970 #, fuzzy, c-format msgid "Transfer Now" msgstr "" " Μεταφορά \n" "Τώρα" #: standalone/drakbackup:1972 #, fuzzy, c-format msgid "Other (not drakbackup) keys in place already" msgstr "Άλλο\n" #: standalone/drakbackup:1975 #, fuzzy, c-format msgid "Host name or IP." msgstr "Όνομα συστήματος" #: standalone/drakbackup:1980 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: standalone/drakbackup:1985 #, fuzzy, c-format msgid "Login name" msgstr "Όνομα Τομέα" #: standalone/drakbackup:1992 #, c-format msgid "Remember this password" msgstr "Απομνημόνευση του κωδικού πρόσβασης" #: standalone/drakbackup:2004 #, c-format msgid "Need hostname, username and password!" msgstr "Χρειάζεται το δικτυακό όνομα, όνομα χρήστη και κωδικό πρόσβασης!" #: standalone/drakbackup:2106 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "Χρήση CD/DVDROM για τα αρχεία ασφαλείας" #: standalone/drakbackup:2109 #, fuzzy, c-format msgid "Choose your CD/DVD device" msgstr "Παρακαλώ ορίστε τον χώρο του CD/DVD " #: standalone/drakbackup:2114 #, fuzzy, c-format msgid "Choose your CD/DVD media size" msgstr "Παρακαλώ ορίστε τον χώρο του CD/DVD " #: standalone/drakbackup:2121 #, fuzzy, c-format msgid "Multisession CD" msgstr "Σταθμός πολυμέσων" #: standalone/drakbackup:2123 #, c-format msgid "CDRW media" msgstr "" #: standalone/drakbackup:2128 #, fuzzy, c-format msgid "Erase your RW media (1st Session)" msgstr "RW" #: standalone/drakbackup:2129 #, c-format msgid " Erase Now " msgstr "Σβήσιμο Τώρα " #: standalone/drakbackup:2136 #, c-format msgid "DVD+RW media" msgstr "" #: standalone/drakbackup:2138 #, fuzzy, c-format msgid "DVD-R media" msgstr "συσκευή" #: standalone/drakbackup:2140 #, fuzzy, c-format msgid "DVDRAM device" msgstr "συσκευή" #: standalone/drakbackup:2145 #, fuzzy, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" "Παρακαλώ εισάγετε το όνομα της συσκευής εγγραφής CD\n" "π.χ. : 0,1,0" #: standalone/drakbackup:2177 #, c-format msgid "No CD device defined!" msgstr "Δεν καθορίστηκε συσκευή CD" #: standalone/drakbackup:2227 #, c-format msgid "Use tape to backup" msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας" #: standalone/drakbackup:2230 #, fuzzy, c-format msgid "Device name to use for backup" msgstr "" "Παρακαλώ εισάγεται το όνομα συσκευής για τη χρήση των αντιγράφων ασφαλείας" #: standalone/drakbackup:2237 #, fuzzy, c-format msgid "Don't rewind tape after backup" msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας" #: standalone/drakbackup:2243 #, fuzzy, c-format msgid "Erase tape before backup" msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας" #: standalone/drakbackup:2249 #, fuzzy, c-format msgid "Eject tape after the backup" msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας" #: standalone/drakbackup:2317 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "Παρακαλώ ορίστε τον κατάλογο αποθήκευσης: " #: standalone/drakbackup:2326 #, fuzzy, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" "Παρακαλώ επιλέξτε το μέγιστο μέγεθος\n" "που επιτρέπεται στο Drakbackup" #: standalone/drakbackup:2399 #, c-format msgid "CD-R / DVD-R" msgstr "CDROM / DVDROM" #: standalone/drakbackup:2404 #, c-format msgid "HardDrive / NFS" msgstr "Σκληρός Δίσκος / NFS" #: standalone/drakbackup:2420 standalone/drakbackup:2425 #: standalone/drakbackup:2430 #, c-format msgid "hourly" msgstr "ωριαία" #: standalone/drakbackup:2421 standalone/drakbackup:2426 #: standalone/drakbackup:2430 #, c-format msgid "daily" msgstr "καθημερινά" #: standalone/drakbackup:2422 standalone/drakbackup:2427 #: standalone/drakbackup:2430 #, c-format msgid "weekly" msgstr "εβδομαδιαία" #: standalone/drakbackup:2423 standalone/drakbackup:2428 #: standalone/drakbackup:2430 #, c-format msgid "monthly" msgstr "μηνιαία" #: standalone/drakbackup:2424 standalone/drakbackup:2429 #: standalone/drakbackup:2430 #, fuzzy, c-format msgid "custom" msgstr "Προσαρμοσμένο" #: standalone/drakbackup:2435 #, c-format msgid "January" msgstr "Ιανουάριος" #: standalone/drakbackup:2435 #, c-format msgid "February" msgstr "Φεβρουάριος" #: standalone/drakbackup:2435 #, c-format msgid "March" msgstr "Μάρτιος" #: standalone/drakbackup:2436 #, c-format msgid "April" msgstr "Απρίλιος" #: standalone/drakbackup:2436 #, c-format msgid "May" msgstr "Μάιος" #: standalone/drakbackup:2436 #, c-format msgid "June" msgstr "Ιούνιος" #: standalone/drakbackup:2436 #, c-format msgid "July" msgstr "Ιούλιος" #: standalone/drakbackup:2436 #, c-format msgid "August" msgstr "Αύγουστος" #: standalone/drakbackup:2436 #, c-format msgid "September" msgstr "Σεπτέμβριος" #: standalone/drakbackup:2437 #, c-format msgid "October" msgstr "Οκτώβριος" #: standalone/drakbackup:2437 #, c-format msgid "November" msgstr "Νοέμβριος" #: standalone/drakbackup:2437 #, c-format msgid "December" msgstr "Δεκέμβριος" #: standalone/drakbackup:2442 #, c-format msgid "Sunday" msgstr "Κυριακή" #: standalone/drakbackup:2442 #, c-format msgid "Monday" msgstr "Δευτέρα" #: standalone/drakbackup:2442 #, c-format msgid "Tuesday" msgstr "Τρίτη" #: standalone/drakbackup:2443 #, c-format msgid "Wednesday" msgstr "Τετάρτη" #: standalone/drakbackup:2443 #, c-format msgid "Thursday" msgstr "Πέμπτη" #: standalone/drakbackup:2443 #, c-format msgid "Friday" msgstr "Παρασκευή" #: standalone/drakbackup:2443 #, c-format msgid "Saturday" msgstr "Σάββατο" #: standalone/drakbackup:2478 #, c-format msgid "Use daemon" msgstr "Χρήση δαίμονα" #: standalone/drakbackup:2483 #, fuzzy, c-format msgid "Please choose the time interval between each backup" msgstr "" "Παρακαλώ επιλέξτε το \n" "διάστημα μεταξύ του κάθε\n" "αντίγραφου ασφαλείας" #: standalone/drakbackup:2489 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: standalone/drakbackup:2494 #, c-format msgid "Minute" msgstr "Λεπτό" #: standalone/drakbackup:2498 #, c-format msgid "Hour" msgstr "Ώρα" #: standalone/drakbackup:2502 #, c-format msgid "Day" msgstr "Ημέρα" #: standalone/drakbackup:2506 #, c-format msgid "Month" msgstr "Μήνας" #: standalone/drakbackup:2510 #, fuzzy, c-format msgid "Weekday" msgstr "Τετάρτη" #: standalone/drakbackup:2516 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "" "Παρακαλώ επιλέξτε το \n" "μέσο για τα αντίγραφα \n" "ασφαλείας" #: standalone/drakbackup:2523 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" "\n" "\n" " Σημείωση." #: standalone/drakbackup:2524 #, fuzzy, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" "\n" "\n" " Σημείωση." #: standalone/drakbackup:2571 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: standalone/drakbackup:2572 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "Αντίγραφα ασφαλείας άλλων αρχείων" #: standalone/drakbackup:2574 #, c-format msgid "Send mail report after each backup to:" msgstr "" "Αποστολή ηλεκτρονικού μηνύματος μετά από κάθε λήψη αντιγράφων ασφαλείας στο:" #: standalone/drakbackup:2580 #, fuzzy, c-format msgid "SMTP server for mail:" msgstr "Δικτυακό όνομα SMB εξυπηρετητή" #: standalone/drakbackup:2585 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "Διαγραφή των αρχείων tar από το δίσκο μετά τη μεταφορά σε άλλο μέσο." #: standalone/drakbackup:2624 #, c-format msgid "What" msgstr "Τι" #: standalone/drakbackup:2629 #, c-format msgid "Where" msgstr "Που" #: standalone/drakbackup:2634 #, c-format msgid "When" msgstr "Πότε" #: standalone/drakbackup:2639 #, c-format msgid "More Options" msgstr "Περισσότερες Επιλογές" #: standalone/drakbackup:2651 #, fuzzy, c-format msgid "Backup destination not configured..." msgstr "Η λειτουργικότητα του δικτύου δεν ρυθμίστηκε" #: standalone/drakbackup:2667 standalone/drakbackup:4731 #, c-format msgid "Drakbackup Configuration" msgstr "Ρυθμίσεις Drakbackup" #: standalone/drakbackup:2684 #, c-format msgid "Please choose where you want to backup" msgstr "Παρακαλώ επιλέξτε την θέση των αντιγράφων ασφαλείας" #: standalone/drakbackup:2686 #, fuzzy, c-format msgid "Hard Drive used to prepare backups for all media" msgstr "Διαγραφή των αρχείων tar από το δίσκο μετά τη μεταφορά σε άλλο μέσο." #: standalone/drakbackup:2694 #, c-format msgid "Across Network" msgstr "στο Δίκτυο" #: standalone/drakbackup:2702 #, c-format msgid "On CD-R" msgstr "στο CDROM" #: standalone/drakbackup:2710 #, c-format msgid "On Tape Device" msgstr "στη Συσκευή Ταινίας" #: standalone/drakbackup:2738 #, c-format msgid "Please select media for backup..." msgstr "Παρακαλώ επιλέξτε το μέσο για τα αντίγραφα ασφαλείας..." #: standalone/drakbackup:2760 #, c-format msgid "Backup Users" msgstr "Αντίγραφο Ασφαλείας Χρηστών" #: standalone/drakbackup:2761 #, fuzzy, c-format msgid " (Default is all users)" msgstr "Προεπιλεγμένος εκτυπωτής" #: standalone/drakbackup:2773 #, c-format msgid "Please choose what you want to backup" msgstr "Παρακαλώ επιλέξτε τι θέλετε να πάρετε σε αντίγραφα ασφαλείας" #: standalone/drakbackup:2774 #, c-format msgid "Backup System" msgstr "Αντίγραφο Ασφαλείας Συστήματος" #: standalone/drakbackup:2776 #, c-format msgid "Select user manually" msgstr "Επιλογή χρήστη χειροκίνητα" #: standalone/drakbackup:2805 #, c-format msgid "Please select data to backup..." msgstr "Παρακαλώ επιλέξτε τα αρχεία που θα γίνουν αντίγραφα ασφαλείας" #: standalone/drakbackup:2879 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" "\n" "- Πηγές Αντιγράφων Ασφαλείας:\n" #: standalone/drakbackup:2880 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" "\n" "- Αρχεία Συστήματος:\n" #: standalone/drakbackup:2882 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" "\n" "- Αρχεία Χρηστών:\n" #: standalone/drakbackup:2884 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" "\n" "- Άλλα Αρχεία:\n" #: standalone/drakbackup:2886 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" "\n" "- Αποθήκευση στον σκληρό δίσκο στην θέση: %s\n" #: standalone/drakbackup:2887 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: standalone/drakbackup:2890 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" "\n" "- Διαγραφή αρχείων tar από τον δίσκο μετά το αντίγραφο ασφαλείας.\n" #: standalone/drakbackup:2894 #, fuzzy, c-format msgid "NO" msgstr "ΠΛΗΡΟΦΟΡΙΕΣ" #: standalone/drakbackup:2895 #, c-format msgid "YES" msgstr "" #: standalone/drakbackup:2896 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" "\n" "- Εγγραφή σε CD" #: standalone/drakbackup:2897 #, c-format msgid "RW" msgstr "RW" #: standalone/drakbackup:2898 #, c-format msgid " on device: %s" msgstr "Στη Συσκευή : %s" #: standalone/drakbackup:2899 #, c-format msgid " (multi-session)" msgstr "" #: standalone/drakbackup:2900 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" "\n" " Αποθήκευση σε Ταινία στη συσκευή: %s" #: standalone/drakbackup:2901 #, c-format msgid "\t\tErase=%s" msgstr "\t\tΣβήσιμο=%s" #: standalone/drakbackup:2904 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" "\n" " Αποθήκευση μέσω %s στον υπολογιστή: %s\n" #: standalone/drakbackup:2905 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" "\t\t όνομα χρήστη: %s\n" "\t\t στη θέση: %s \n" #: standalone/drakbackup:2906 #, c-format msgid "" "\n" "- Options:\n" msgstr "" "\n" "- Επιλογές:\n" #: standalone/drakbackup:2907 #, c-format msgid "\tDo not include System Files\n" msgstr "\tΧωρίς το Αρχείο Συστήματος\n" #: standalone/drakbackup:2910 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "\tΑντίγραφα Ασφαλείας ως tar και bzip2\n" #: standalone/drakbackup:2912 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "\tΑντίγραφα Ασφαλείας ως tar και gzip\n" #: standalone/drakbackup:2915 #, fuzzy, c-format msgid "\tUse .backupignore files\n" msgstr "Αντίγραφα ασφαλείας άλλων αρχείων" #: standalone/drakbackup:2916 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: standalone/drakbackup:2917 #, fuzzy, c-format msgid "\tUsing SMTP server %s\n" msgstr "Στον εξυπηρετητή CUPS \"%s\"" #: standalone/drakbackup:2919 #, fuzzy, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" "\n" "- Δαίμονας (%s) μαζί με :\n" #: standalone/drakbackup:2920 #, c-format msgid "\t-Hard drive.\n" msgstr "\t-Σκληρός Δίσκος.\n" #: standalone/drakbackup:2921 #, c-format msgid "\t-CD-R.\n" msgstr "\t-CD-R.\n" #: standalone/drakbackup:2922 #, c-format msgid "\t-Tape \n" msgstr "\t-Ταινία \n" #: standalone/drakbackup:2923 #, c-format msgid "\t-Network by FTP.\n" msgstr "\t-Δίκτυο μέσω FTP.\n" #: standalone/drakbackup:2924 #, c-format msgid "\t-Network by SSH.\n" msgstr "\t-Δίκτυο μέσω SSH.\n" #: standalone/drakbackup:2925 #, c-format msgid "\t-Network by rsync.\n" msgstr "\t-Δίκτυο μέσω rsync.\n" #: standalone/drakbackup:2926 #, c-format msgid "\t-Network by webdav.\n" msgstr "\t-Δίκτυο μέσω webdav.\n" #: standalone/drakbackup:2928 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "Καμία ρύθμιση, κάντε κλικ στον Οδηγό ή στο Προχωρημένα.\n" #: standalone/drakbackup:2933 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" "Λίστα των δεδομένων προς επαναφορά:\n" "\n" #: standalone/drakbackup:2935 #, fuzzy, c-format msgid "- Restore System Files.\n" msgstr "" "\n" "- Αρχεία Συστήματος:\n" #: standalone/drakbackup:2937 standalone/drakbackup:2947 #, c-format msgid " - from date: %s %s\n" msgstr "" #: standalone/drakbackup:2940 #, fuzzy, c-format msgid "- Restore User Files: \n" msgstr "" "\n" "- Αρχεία Χρηστών:\n" #: standalone/drakbackup:2945 #, fuzzy, c-format msgid "- Restore Other Files: \n" msgstr "" "\n" "- Άλλα Αρχεία:\n" #: standalone/drakbackup:3121 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" "Λίστα των κατεστραμμένων δεδομένων:\n" "\n" #: standalone/drakbackup:3123 #, c-format msgid "Please uncheck or remove it on next time." msgstr "Παρακαλώ αφαιρέστε το την επόμενη φορά." #: standalone/drakbackup:3133 #, c-format msgid "Backup files are corrupted" msgstr "Τα αντίγραφα ασφαλείας είναι κατεστραμμένα" #: standalone/drakbackup:3154 #, c-format msgid " All of your selected data have been " msgstr " Όλα τα επιλεγμένα δεδομένα έχουν " #: standalone/drakbackup:3155 #, c-format msgid " Successfuly Restored on %s " msgstr " Ανακτηθεί με επιτυχία στο %s " #: standalone/drakbackup:3270 #, c-format msgid " Restore Configuration " msgstr " Ρυθμίσεις Επαναφοράς " #: standalone/drakbackup:3298 #, c-format msgid "OK to restore the other files." msgstr "Εντάξει για την επαναφορά των άλλων αρχείων." #: standalone/drakbackup:3316 #, fuzzy, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "χρήστης" #: standalone/drakbackup:3382 #, fuzzy, c-format msgid "Please choose the date to restore:" msgstr "Παρακαλώ επιλέξτε την ημερομηνία επαναφοράς" #: standalone/drakbackup:3420 #, c-format msgid "Restore from Hard Disk." msgstr "Επαναφορά από τον σκληρό δίσκο." #: standalone/drakbackup:3422 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "Παρακαλώ εισάγετε τον κατάλογο που βρίσκονται τα αντίγραφα ασφαλείας" #: standalone/drakbackup:3478 #, c-format msgid "Select another media to restore from" msgstr "Επιλέξτε άλλο μέσο για την ανάκτηση" #: standalone/drakbackup:3480 #, c-format msgid "Other Media" msgstr "Άλλα Μέσα" #: standalone/drakbackup:3485 #, c-format msgid "Restore system" msgstr "Επαναφορά συστήματος" #: standalone/drakbackup:3486 #, c-format msgid "Restore Users" msgstr "Επαναφορά Χρηστών" #: standalone/drakbackup:3487 #, c-format msgid "Restore Other" msgstr "Επαναφορά Άλλων" #: standalone/drakbackup:3489 #, c-format msgid "select path to restore (instead of /)" msgstr "επιλέξτε τη θέση επαναφοράς (αντί του /)" #: standalone/drakbackup:3493 #, fuzzy, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "Ολοκληρώθηκε νέο" #: standalone/drakbackup:3495 #, c-format msgid "Remove user directories before restore." msgstr "Αφαίρεση καταλόγων χρηστών πριν από την επαναφορά." #: standalone/drakbackup:3575 #, c-format msgid "Filename text substring to search for (empty string matches all):" msgstr "" #: standalone/drakbackup:3578 #, c-format msgid "Search Backups" msgstr "" #: standalone/drakbackup:3597 #, fuzzy, c-format msgid "No matches found..." msgstr "Δεν βρέθηκε εικόνα" #: standalone/drakbackup:3601 #, fuzzy, c-format msgid "Restore Selected" msgstr "" "Επαναφορά Επιλεγμένων\n" "Αρχείων" #: standalone/drakbackup:3735 #, c-format msgid "" "Click date/time to see backup files.\n" "Ctrl-Click files to select multiple files." msgstr "" #: standalone/drakbackup:3741 #, fuzzy, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "Επαναφορά\n" #: standalone/drakbackup:3750 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" "Επαναφορά Επιλεγμένων\n" "Αρχείων" #: standalone/drakbackup:3766 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" "Αλλαγή\n" "Θέση Επαναφοράς" #: standalone/drakbackup:3833 #, c-format msgid "Backup files not found at %s." msgstr "Τα αντίγραφα ασφαλείας δεν βρέθηκαν στο %s." #: standalone/drakbackup:3846 #, c-format msgid "Restore From CD" msgstr "Επαναφορά από CD" #: standalone/drakbackup:3846 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: standalone/drakbackup:3848 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: standalone/drakbackup:3858 #, c-format msgid "Restore From Tape" msgstr "Επαναφορά Από Ταινία" #: standalone/drakbackup:3858 #, fuzzy, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" "\n" " συσκευή" #: standalone/drakbackup:3860 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: standalone/drakbackup:3871 #, c-format msgid "Restore Via Network" msgstr "Επαναφορά μέσω δικτύου" #: standalone/drakbackup:3871 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "Επαναφορά Μέσω Πρωτόκολλο Δικτύου: %s" #: standalone/drakbackup:3872 #, c-format msgid "Host Name" msgstr "Όνομα Συστήματος" #: standalone/drakbackup:3873 #, fuzzy, c-format msgid "Host Path or Module" msgstr "Σύστημα" #: standalone/drakbackup:3880 #, c-format msgid "Password required" msgstr "Απαιτείται κωδικός πρόσβασης" #: standalone/drakbackup:3886 #, c-format msgid "Username required" msgstr "Απαιτείται όνομα χρήστη" #: standalone/drakbackup:3889 #, c-format msgid "Hostname required" msgstr "απαιτείται το δικτυακό όνομα" #: standalone/drakbackup:3894 #, c-format msgid "Path or Module required" msgstr "Η Θέση ή το Άρθρωμα απαιτείται" #: standalone/drakbackup:3907 #, c-format msgid "Files Restored..." msgstr "" #: standalone/drakbackup:3910 #, c-format msgid "Restore Failed..." msgstr "Η Επαναφορά Απέτυχε..." #: standalone/drakbackup:4015 standalone/drakbackup:4031 #, fuzzy, c-format msgid "%s not retrieved..." msgstr "το %s δεν ανταποκρίνεται" #: standalone/drakbackup:4155 standalone/drakbackup:4228 #, fuzzy, c-format msgid "Search for files to restore" msgstr "Επιλέξτε άλλο μέσο για την ανάκτηση" #: standalone/drakbackup:4160 #, c-format msgid "Restore all backups" msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας" #: standalone/drakbackup:4169 #, c-format msgid "Custom Restore" msgstr "Προσαρμοσμένη Επαναφορά" #: standalone/drakbackup:4174 standalone/drakbackup:4224 #, c-format msgid "Restore From Catalog" msgstr "Επαναφορά από Κατάλογο" #: standalone/drakbackup:4196 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "Παρακαλώ επιλέξτε τα δεδομένα προς επαναφορά..." #: standalone/drakbackup:4197 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Είναι σωστή η ρύθμιση;" #: standalone/drakbackup:4198 #, c-format msgid " and the CD is in the drive" msgstr "" #: standalone/drakbackup:4200 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: standalone/drakbackup:4216 #, c-format msgid "CD in place - continue." msgstr "Το CD είναι στη θέση του - συνέχεια" #: standalone/drakbackup:4221 #, fuzzy, c-format msgid "Browse to new restore repository." msgstr "αναζήτηση νέο." #: standalone/drakbackup:4258 #, c-format msgid "Restore Progress" msgstr "Πρόοδος Ανάκτησης" #: standalone/drakbackup:4292 standalone/drakbackup:4404 #: standalone/logdrake:175 #, c-format msgid "Save" msgstr "Αποθήκευση" #: standalone/drakbackup:4378 #, c-format msgid "Build Backup" msgstr "Δημιουργία αντιγράφων ασφαλείας" #: standalone/drakbackup:4430 standalone/drakbackup:4829 #, c-format msgid "Restore" msgstr "Επαναφορά" #: standalone/drakbackup:4600 #, c-format msgid "The following packages need to be installed:\n" msgstr "Τα παρακάτω πακέτα πρέπει να εγκατασταθούν:\n" #: standalone/drakbackup:4622 #, c-format msgid "Please select data to restore..." msgstr "Παρακαλώ επιλέξτε τα δεδομένα προς επαναφορά..." #: standalone/drakbackup:4662 #, c-format msgid "Backup system files" msgstr "Αντίγραφα ασφαλείας του συστήματος αρχείων" #: standalone/drakbackup:4665 #, c-format msgid "Backup user files" msgstr "Αντίγραφα ασφαλείας αρχείων χρηστών" #: standalone/drakbackup:4668 #, c-format msgid "Backup other files" msgstr "Αντίγραφα ασφαλείας άλλων αρχείων" #: standalone/drakbackup:4671 standalone/drakbackup:4707 #, c-format msgid "Total Progress" msgstr "Συνολική Πρόοδος" #: standalone/drakbackup:4699 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "Αποστολή αρχείων..." #: standalone/drakbackup:4702 #, c-format msgid "Sending files..." msgstr "Αποστολή αρχείων..." #: standalone/drakbackup:4772 #, c-format msgid "Backup Now from configuration file" msgstr "Δημιουργία Αντιγράφων Ασφαλείας από το αρχείο ρυθμίσεων" #: standalone/drakbackup:4777 #, c-format msgid "View Backup Configuration." msgstr "Προβολή Ρυθμίσεων Αντιγράφων Ασφαλείας" #: standalone/drakbackup:4803 #, c-format msgid "Wizard Configuration" msgstr "Ρυθμίσεις Οδηγού" #: standalone/drakbackup:4808 #, c-format msgid "Advanced Configuration" msgstr "Προχωρημένες Ρυθμίσεις" #: standalone/drakbackup:4813 #, fuzzy, c-format msgid "View Configuration" msgstr "Ρύθμιση" #: standalone/drakbackup:4817 #, c-format msgid "View Last Log" msgstr "" #: standalone/drakbackup:4822 #, c-format msgid "Backup Now" msgstr "Αντίγραφα ασφαλείας Τώρα" #: standalone/drakbackup:4826 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" "Δεν βρέθηκε ρύθμιση\n" "παρακαλώ κάντε κλικ στο Οδηγό ή στο Προχωρημένο." #: standalone/drakbackup:4858 standalone/drakbackup:4865 #, c-format msgid "Drakbackup" msgstr "Drakbackup" #: standalone/drakboot:56 #, fuzzy, c-format msgid "Graphical boot theme selection" msgstr "Επιλογή μοντέλου εκτυπωτή" #: standalone/drakboot:56 #, c-format msgid "System mode" msgstr "Κατάσταση συστήματος" #: standalone/drakboot:66 standalone/drakfloppy:46 standalone/harddrake2:97 #: standalone/harddrake2:98 standalone/logdrake:70 standalone/printerdrake:150 #: standalone/printerdrake:151 standalone/printerdrake:152 #, c-format msgid "/_File" msgstr "/_Αρχείο" #: standalone/drakboot:67 standalone/drakfloppy:47 standalone/logdrake:76 #, c-format msgid "/File/_Quit" msgstr "/Αρχείο/Έ_ξοδος" #: standalone/drakboot:67 standalone/drakfloppy:47 standalone/harddrake2:98 #: standalone/logdrake:76 standalone/printerdrake:152 #, c-format msgid "Q" msgstr "Q" #: standalone/drakboot:118 #, c-format msgid "Install themes" msgstr "Εγκατάσταση θεμάτων" #: standalone/drakboot:119 #, c-format msgid "Create new theme" msgstr "Δημιουργία νέου θέματος" #: standalone/drakboot:133 #, c-format msgid "Use graphical boot" msgstr "" #: standalone/drakboot:138 #, c-format msgid "" "Your system bootloader is not in framebuffer mode. To activate graphical " "boot, select a graphic video mode from the bootloader configuration tool." msgstr "" #: standalone/drakboot:145 #, fuzzy, c-format msgid "Theme" msgstr "Θέματα" #: standalone/drakboot:147 #, c-format msgid "" "Display theme\n" "under console" msgstr "" "Εμφάνιση θέματος\n" "στην κονσόλα" #: standalone/drakboot:156 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "Λειτουργία γραφικού περιβάλλοντος κατά την εκκίνηση του συστήματος" #: standalone/drakboot:164 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "Ναι, επιθυμώ αυτόματη προσπέλαση με (χρήστης, περιβάλλον)" #: standalone/drakboot:165 #, c-format msgid "No, I don't want autologin" msgstr "Όχι, δεν επιθυμώ αυτόματη προσπέλαση" #: standalone/drakboot:171 #, fuzzy, c-format msgid "Default user" msgstr "Προεπιλεγμένος εκτυπωτής" #: standalone/drakboot:172 #, fuzzy, c-format msgid "Default desktop" msgstr "Προεπιλεγμένο" #: standalone/drakboot:236 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Η εγκατάσταση του %s απέτυχε. Προκλήθηκε το ακόλουθο σφάλμα:" #: standalone/drakbug:40 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" #: standalone/drakbug:48 #, c-format msgid "Mandrake Bug Report Tool" msgstr "Εργαλείο Αναφοράς Σφαλμάτων Mandrake" #: standalone/drakbug:53 #, c-format msgid "Mandrake Control Center" msgstr "Κέντρο Ελέγχου Mandrake" #: standalone/drakbug:55 #, c-format msgid "Synchronization tool" msgstr "Εργαλείο Συγχρονισμού" #: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204 #: standalone/drakbug:206 standalone/drakbug:210 #, c-format msgid "Standalone Tools" msgstr "Ξεχωριστά Εργαλεία" #: standalone/drakbug:57 #, c-format msgid "HardDrake" msgstr "HardDrake" #: standalone/drakbug:58 #, c-format msgid "Mandrake Online" msgstr "Mandrake Online" #: standalone/drakbug:59 #, c-format msgid "Menudrake" msgstr "Menudrake" #: standalone/drakbug:60 #, c-format msgid "Msec" msgstr "Msec" #: standalone/drakbug:61 #, c-format msgid "Remote Control" msgstr "Απομακρυσμένος Έλεγχος" #: standalone/drakbug:62 #, c-format msgid "Software Manager" msgstr "Διαχειριστής Λογισμικού" #: standalone/drakbug:63 #, c-format msgid "Urpmi" msgstr "Urpmi" #: standalone/drakbug:64 #, c-format msgid "Windows Migration tool" msgstr "Εργαλείο Μετάβασης Windows " #: standalone/drakbug:65 #, c-format msgid "Userdrake" msgstr "Userdrake" #: standalone/drakbug:66 #, c-format msgid "Configuration Wizards" msgstr "Οδηγοί Ρύθμισης" #: standalone/drakbug:84 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" #: standalone/drakbug:102 #, c-format msgid "Application:" msgstr "Εφαρμογή:" #: standalone/drakbug:103 standalone/drakbug:115 #, c-format msgid "Package: " msgstr "Πακέτο:" #: standalone/drakbug:104 #, c-format msgid "Kernel:" msgstr "Πυρήνας:" #: standalone/drakbug:105 standalone/drakbug:116 #, c-format msgid "Release: " msgstr "Έκδοση:" #: standalone/drakbug:110 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: standalone/drakbug:113 #, fuzzy, c-format msgid "Find Package" msgstr "%d πακέτα" #: standalone/drakbug:117 #, fuzzy, c-format msgid "Summary: " msgstr "Περίληψη" #: standalone/drakbug:129 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: standalone/drakbug:132 #, c-format msgid "Bug Description/System Information" msgstr "" #: standalone/drakbug:136 #, fuzzy, c-format msgid "Submit kernel version" msgstr "έκδοση πυρήνα" #: standalone/drakbug:137 #, c-format msgid "Submit cpuinfo" msgstr "" #: standalone/drakbug:138 #, c-format msgid "Submit lspci" msgstr "" #: standalone/drakbug:159 #, c-format msgid "Report" msgstr "Αναφορά" #: standalone/drakbug:219 #, c-format msgid "Not installed" msgstr "Μη εγκατεστημένο" #: standalone/drakbug:231 #, c-format msgid "Package not installed" msgstr "Το πακέτο δεν είναι εγκατεστημένο" #: standalone/drakbug:248 #, c-format msgid "NOT FOUND" msgstr "" #: standalone/drakbug:259 #, fuzzy, c-format msgid "connecting to %s ..." msgstr "σύνδεση στον οδηγό Bugzilla ..." #: standalone/drakbug:267 #, c-format msgid "No browser available! Please install one" msgstr "Δεν βρέθηκε περιηγητής! Παρακαλώ εγκαταστήστε τον" #: standalone/drakbug:286 #, fuzzy, c-format msgid "Please enter a package name." msgstr "Παρακαλώ εισάγετε όνομα χρήστη" #: standalone/drakbug:292 #, fuzzy, c-format msgid "Please enter summary text." msgstr "Παρακαλώ εισάγετε το όνομα χρήστη" #: standalone/drakclock:29 #, fuzzy, c-format msgid "DrakClock" msgstr "Drakbackup" #: standalone/drakclock:36 #, fuzzy, c-format msgid "Change Time Zone" msgstr "Ωρολογιακή Ζώνη" #: standalone/drakclock:42 #, c-format msgid "Timezone - DrakClock" msgstr "" #: standalone/drakclock:44 #, c-format msgid "GMT - DrakClock" msgstr "" #: standalone/drakclock:44 #, fuzzy, c-format msgid "Is your hardware clock set to GMT?" msgstr "Το ρολόι του υπολογιστή σας είναι ρυθμισμένο σε GMT (ώρα Γκρίνουιτς)" #: standalone/drakclock:71 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Συσκευή δικτύου" #: standalone/drakclock:73 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: standalone/drakclock:74 #, fuzzy, c-format msgid "Enable Network Time Protocol" msgstr "Επαναφορά Μέσω Πρωτόκολλο Δικτύου: %s" #: standalone/drakclock:82 #, fuzzy, c-format msgid "Server:" msgstr "Εξυπηρετητής:" #: standalone/drakclock:125 standalone/drakclock:137 #, fuzzy, c-format msgid "Reset" msgstr "Άρνηση" #: standalone/drakclock:200 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol\n" "\n" "Do you want to install ntp ?" msgstr "" #: standalone/drakconnect:78 #, c-format msgid "Network configuration (%d adapters)" msgstr "Ρύθμιση δικτύου (%d προσαρμογείς)" #: standalone/drakconnect:89 standalone/drakconnect:686 #, c-format msgid "Gateway:" msgstr "Πύλη δικτύου:" #: standalone/drakconnect:89 standalone/drakconnect:686 #, c-format msgid "Interface:" msgstr "Διεπαφή:" #: standalone/drakconnect:93 standalone/net_monitor:105 #, c-format msgid "Wait please" msgstr "Παρακαλώ περιμένετε" #: standalone/drakconnect:113 #, c-format msgid "Interface" msgstr "Διεπαφή" #: standalone/drakconnect:113 standalone/drakconnect:502 #: standalone/drakvpn:1136 #, c-format msgid "Protocol" msgstr "Πρωτόκολλο" #: standalone/drakconnect:113 #, c-format msgid "Driver" msgstr "Οδηγός" #: standalone/drakconnect:113 #, c-format msgid "State" msgstr "Κατάσταση:" #: standalone/drakconnect:130 #, c-format msgid "Hostname: " msgstr "Όνομα συστήματος: " #: standalone/drakconnect:132 #, fuzzy, c-format msgid "Configure hostname..." msgstr "Ρύθμιση ποντικιού" #: standalone/drakconnect:146 standalone/drakconnect:727 #, c-format msgid "LAN configuration" msgstr "Ρύθμιση LAN" #: standalone/drakconnect:151 #, c-format msgid "Configure Local Area Network..." msgstr "Ρύθμιση τοπικού δικτύου..." #: standalone/drakconnect:159 standalone/drakconnect:228 #: standalone/drakconnect:232 #, c-format msgid "Apply" msgstr "Εφαρμογή" #: standalone/drakconnect:254 standalone/drakconnect:263 #: standalone/drakconnect:277 standalone/drakconnect:283 #: standalone/drakconnect:293 standalone/drakconnect:294 #: standalone/drakconnect:540 #, c-format msgid "TCP/IP" msgstr "" #: standalone/drakconnect:254 standalone/drakconnect:263 #: standalone/drakconnect:277 standalone/drakconnect:421 #: standalone/drakconnect:425 standalone/drakconnect:540 #, fuzzy, c-format msgid "Account" msgstr "Περί" #: standalone/drakconnect:283 standalone/drakconnect:347 #: standalone/drakconnect:348 standalone/drakconnect:540 #, c-format msgid "Wireless" msgstr "" #: standalone/drakconnect:325 #, fuzzy, c-format msgid "DNS servers" msgstr "Εξυπηρετητής DNS" #: standalone/drakconnect:332 #, fuzzy, c-format msgid "Search Domain" msgstr "Τομέας NIS" #: standalone/drakconnect:338 #, fuzzy, c-format msgid "static" msgstr "Αυτόματο IP" #: standalone/drakconnect:338 #, fuzzy, c-format msgid "dhcp" msgstr "χρήση dhcp" #: standalone/drakconnect:457 #, fuzzy, c-format msgid "Flow control" msgstr "S" #: standalone/drakconnect:458 #, fuzzy, c-format msgid "Line termination" msgstr "Σταθμός Διαδικτύου" #: standalone/drakconnect:463 #, c-format msgid "Tone dialing" msgstr "" #: standalone/drakconnect:463 #, c-format msgid "Pulse dialing" msgstr "" #: standalone/drakconnect:468 #, fuzzy, c-format msgid "Use lock file" msgstr "Επιλέξτε αρχείο" #: standalone/drakconnect:471 #, fuzzy, c-format msgid "Modem timeout" msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα" #: standalone/drakconnect:475 #, c-format msgid "Wait for dialup tone before dialing" msgstr "" #: standalone/drakconnect:478 #, fuzzy, c-format msgid "Busy wait" msgstr "Κουβέιτ" #: standalone/drakconnect:482 #, fuzzy, c-format msgid "Modem sound" msgstr "Μόντεμ" #: standalone/drakconnect:483 #, fuzzy, c-format msgid "Enable" msgstr "ενεργοποίηση" #: standalone/drakconnect:483 #, fuzzy, c-format msgid "Disable" msgstr "απενεργοποίηση" #: standalone/drakconnect:522 standalone/harddrake2:58 #, c-format msgid "Media class" msgstr "Κλάση Μέσου" #: standalone/drakconnect:523 standalone/drakfloppy:140 #, c-format msgid "Module name" msgstr "Όνομα αρθρώματος" #: standalone/drakconnect:524 #, fuzzy, c-format msgid "Mac Address" msgstr "Διεύθυνση Μετάδοσης:" #: standalone/drakconnect:525 standalone/harddrake2:21 #, c-format msgid "Bus" msgstr "Bus" #: standalone/drakconnect:526 standalone/harddrake2:29 #, c-format msgid "Location on the bus" msgstr "Θέση του διαύλου" #: standalone/drakconnect:587 #, c-format msgid "" "An unexpected error has happened:\n" "%s" msgstr "" #: standalone/drakconnect:597 #, fuzzy, c-format msgid "Remove a network interface" msgstr "Επιλέξτε συσκευή δικτύου" #: standalone/drakconnect:601 #, fuzzy, c-format msgid "Select the network interface to remove:" msgstr "Επιλέξτε συσκευή δικτύου" #: standalone/drakconnect:617 #, fuzzy, c-format msgid "" "An error occured while deleting the \"%s\" network interface:\n" "\n" "%s" msgstr "" "Ένα πρόβλημα εμφανίστηκε κατά την επανεκκίνηση του δικτύου: \n" "\n" "%s" #: standalone/drakconnect:619 #, c-format msgid "" "Congratulations, the \"%s\" network interface has been succesfully deleted" msgstr "" #: standalone/drakconnect:636 #, c-format msgid "No Ip" msgstr "" #: standalone/drakconnect:637 #, fuzzy, c-format msgid "No Mask" msgstr "Λάθος πακέτο" #: standalone/drakconnect:638 standalone/drakconnect:798 #, c-format msgid "up" msgstr "" #: standalone/drakconnect:638 standalone/drakconnect:798 #, fuzzy, c-format msgid "down" msgstr "Ολοκληρώθηκε" #: standalone/drakconnect:677 standalone/net_monitor:415 #, c-format msgid "Connected" msgstr "Συνδέθηκε" #: standalone/drakconnect:677 standalone/net_monitor:415 #, c-format msgid "Not connected" msgstr "Δε συνδέθηκε" #: standalone/drakconnect:678 #, c-format msgid "Disconnect..." msgstr "Αποσύνδεση..." #: standalone/drakconnect:678 #, c-format msgid "Connect..." msgstr "Σύνδεση..." #: standalone/drakconnect:707 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" "Προειδοποίηση, εντοπίστηκε μια άλλη σύνδεση Διαδικτύου που ίσως χρησιμοποιεί " "το δίκτυό σας" #: standalone/drakconnect:723 #, fuzzy, c-format msgid "Deactivate now" msgstr "απενεργοποίηση τώρα" #: standalone/drakconnect:723 #, fuzzy, c-format msgid "Activate now" msgstr "ενεργοποίηση τώρα" #: standalone/drakconnect:731 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" "Δεν έχετε κάποια ρυθμισμένη διεπαφή.\n" "Ρυθμίστε την κάνοντας κλικ στο 'Ρύθμιση'" #: standalone/drakconnect:745 #, c-format msgid "LAN Configuration" msgstr "Ρύθμιση LΑΝ" #: standalone/drakconnect:757 #, c-format msgid "Adapter %s: %s" msgstr "Προσαρμογέας %s: %s" #: standalone/drakconnect:766 #, c-format msgid "Boot Protocol" msgstr "Πρωτόκολλο Εκκίνησης" #: standalone/drakconnect:767 #, c-format msgid "Started on boot" msgstr "Ξεκίνησαν στην εκκίνηση" #: standalone/drakconnect:803 #, fuzzy, c-format msgid "" "This interface has not been configured yet.\n" "Run the \"Add an interface\" assistant from the Mandrake Control Center" msgstr "" "Η διεπαφή δεν έχει ρυθμιστή ακόμα. \n" "Εκτελέστε τον οδηγό ρύθμισης στην κυρίως οθόνη" #: standalone/drakconnect:858 #, fuzzy, c-format msgid "" "You don't have any configured Internet connection.\n" "Please run \"Internet access\" in control center." msgstr "" "Δεν έχετε σύνδεση με το διαδίκτυο.\n" "Δημιουργήστε μία κάνοντας κλικ στο 'Ρύθμιση'" #: standalone/drakconnect:866 #, c-format msgid "Internet connection configuration" msgstr "Ρύθμιση σύνδεσης Διαδικτύου" #: standalone/drakconnect:907 #, c-format msgid "Provider dns 1 (optional)" msgstr "dns 1 Παροχέα (προαιρετικό)" #: standalone/drakconnect:908 #, c-format msgid "Provider dns 2 (optional)" msgstr "dns 2 Παροχέα (προαιρετικό)" #: standalone/drakconnect:921 #, c-format msgid "Ethernet Card" msgstr "Κάρτα Ethernet" #: standalone/drakconnect:922 #, c-format msgid "DHCP Client" msgstr "Πελάτης DHCP" #: standalone/drakconnect:951 #, c-format msgid "Internet Connection Configuration" msgstr "Ρύθμιση Σύνδεσης Διαδικτύου" #: standalone/drakconnect:952 #, c-format msgid "Internet access" msgstr "Πρόσβαση στο Διαδίκτυο" #: standalone/drakconnect:954 standalone/net_monitor:87 #, c-format msgid "Connection type: " msgstr "Τύπος σύνδεσης: " #: standalone/drakconnect:957 #, c-format msgid "Status:" msgstr "Κατάσταση:" #: standalone/drakedm:53 #, c-format msgid "Choosing a display manager" msgstr "Επιλέγοντας έναν διαχειριστή προβολής" #: standalone/drakedm:54 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" "Ο Διαχειριστής Προβολής X11 σας επιτρέπει να συνδεθείτε\n" "με γραφικό τρόπο στο σύστημά σας με το Σύστημα Παραθύρου Χ να υποστηρίζει\n" "ταυτόχρονες διαφορετικές συνεδρίες Χ στο μηχάνημά σας." #: standalone/drakedm:77 #, fuzzy, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "Το δίκτυο πρέπει να επανεκκινηθεί, Θέλετε να το επανεκκινήσετε ;" #: standalone/drakfloppy:40 #, c-format msgid "drakfloppy" msgstr "drakfloppy" #: standalone/drakfloppy:82 #, fuzzy, c-format msgid "Boot disk creation" msgstr "δημιουργία δισκέτας εκκίνησης" #: standalone/drakfloppy:83 #, c-format msgid "General" msgstr "Γενικά" #: standalone/drakfloppy:86 #, fuzzy, c-format msgid "Device" msgstr "Συσκευή: " #: standalone/drakfloppy:92 #, fuzzy, c-format msgid "Kernel version" msgstr "έκδοση πυρήνα" #: standalone/drakfloppy:107 #, fuzzy, c-format msgid "Preferences" msgstr "Προτίμηση: " #: standalone/drakfloppy:121 #, fuzzy, c-format msgid "Advanced preferences" msgstr "Προχωρημένες Επιλογές" #: standalone/drakfloppy:140 #, c-format msgid "Size" msgstr "Μέγεθος" #: standalone/drakfloppy:143 #, fuzzy, c-format msgid "Mkinitrd optional arguments" msgstr "προαιρετικές επιλογές του mkinitrd" #: standalone/drakfloppy:145 #, c-format msgid "force" msgstr "μετά βίας" #: standalone/drakfloppy:146 #, c-format msgid "omit raid modules" msgstr "παράλειψη των αρθρωμάτων raid" #: standalone/drakfloppy:147 #, c-format msgid "if needed" msgstr "αν χρειάζεται" #: standalone/drakfloppy:148 #, c-format msgid "omit scsi modules" msgstr "παράλειψη των αρθρωμάτων scsi" #: standalone/drakfloppy:151 #, c-format msgid "Add a module" msgstr "Προσθήκη αρθρώματος" #: standalone/drakfloppy:160 #, c-format msgid "Remove a module" msgstr "Απομάκρυνση αρθρώματος" #: standalone/drakfloppy:295 #, c-format msgid "Be sure a media is present for the device %s" msgstr "Σιγουρευτείτε πως ένα μέσο είναι παρόν για τη συσκευή %s" #: standalone/drakfloppy:301 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" "Δεν υπάρχει μέσο ή υπάρχει προστασία εγγραφής για τη συσκευή %s.\n" "Παρακαλώ εισάγετε ένα." #: standalone/drakfloppy:305 #, c-format msgid "Unable to fork: %s" msgstr "Αδυναμία fork: %s" #: standalone/drakfloppy:308 #, fuzzy, c-format msgid "Floppy creation completed" msgstr "Η σύνδεση έγινε." #: standalone/drakfloppy:308 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #: standalone/drakfloppy:311 #, fuzzy, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" "Αδυναμία σωστού τερματισμού του mkbootdisk: \n" " %s \n" " %s" #: standalone/drakfont:181 #, c-format msgid "Search installed fonts" msgstr "Αναζήτηση εγκατεστημένων γραμματοσειρών" #: standalone/drakfont:183 #, c-format msgid "Unselect fonts installed" msgstr "Οι αποεπιλεγμένες γραμματοσειρές εγκαταστάθηκαν" #: standalone/drakfont:206 #, c-format msgid "parse all fonts" msgstr "ανάλυση όλων των γραμματοσειρών" #: standalone/drakfont:208 #, fuzzy, c-format msgid "No fonts found" msgstr "δεν βρέθηκαν γραμματοσειρές" #: standalone/drakfont:216 standalone/drakfont:256 standalone/drakfont:323 #: standalone/drakfont:356 standalone/drakfont:364 standalone/drakfont:390 #: standalone/drakfont:408 standalone/drakfont:422 #, c-format msgid "done" msgstr "Ολοκληρώθηκε" #: standalone/drakfont:221 #, fuzzy, c-format msgid "Could not find any font in your mounted partitions" msgstr "δεν βρέθηκαν γραμματοσειρές στις προσαρτημένες κατατμήσεις" #: standalone/drakfont:254 #, c-format msgid "Reselect correct fonts" msgstr "Ξαναεπιλέξτε τις σωστές γραμματοσειρές" #: standalone/drakfont:257 #, fuzzy, c-format msgid "Could not find any font.\n" msgstr "δεν βρέθηκε καμία γραμματοσειρά\n" #: standalone/drakfont:267 #, c-format msgid "Search for fonts in installed list" msgstr "Αναζήτηση γραμματοσειρών στην λίστα εγκατάστασης" #: standalone/drakfont:292 #, fuzzy, c-format msgid "%s fonts conversion" msgstr "μετατροπή γραμματοσειρών pfm" #: standalone/drakfont:321 #, c-format msgid "Fonts copy" msgstr "Αντιγραφή Γραμματοσειρών" #: standalone/drakfont:324 #, c-format msgid "True Type fonts installation" msgstr "Εγκατάσταση γραμματοσειρών True Type" #: standalone/drakfont:331 #, c-format msgid "please wait during ttmkfdir..." msgstr "παρακαλώ περιμένετε κατά το ttmkfdir..." #: standalone/drakfont:332 #, c-format msgid "True Type install done" msgstr "Η εγκατάστασης True Type ολοκληρώθηκε" #: standalone/drakfont:338 standalone/drakfont:353 #, c-format msgid "type1inst building" msgstr "δημιουργία type1inst" #: standalone/drakfont:347 #, fuzzy, c-format msgid "Ghostscript referencing" msgstr "Ghostscript" #: standalone/drakfont:357 #, c-format msgid "Suppress Temporary Files" msgstr "" #: standalone/drakfont:360 #, c-format msgid "Restart XFS" msgstr "Επανεκκίνηση XFS" #: standalone/drakfont:406 standalone/drakfont:416 #, c-format msgid "Suppress Fonts Files" msgstr "" #: standalone/drakfont:418 #, c-format msgid "xfs restart" msgstr "επανεκκίνηση xfs" #: standalone/drakfont:426 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Πριν εγκαταστήσετε τις γραμματοσειρές, βεβαιωθείτε ότι έχετε το δικαίωμα να " "κάνετε χρήση αυτών των γραμματοσειρών καθώς και να τις εγκαταστήσετε στον " "υπολογιστή σας\n" "\n" "-Μπορείτε να εγκαταστήσετε τις γραμματοσειρές κανονικά. Σε σπάνιες " "περιπτώσεις, εικονικές γραμματοσειρές μπορούν να παγώσουν τον εξυπηρετητή Χ." #: standalone/drakfont:474 standalone/drakfont:483 #, c-format msgid "DrakFont" msgstr "" #: standalone/drakfont:484 #, c-format msgid "Font List" msgstr "Λίστα Γραμματοσειρών" #: standalone/drakfont:490 #, c-format msgid "About" msgstr "Περί" #: standalone/drakfont:492 standalone/drakfont:681 standalone/drakfont:719 #, fuzzy, c-format msgid "Uninstall" msgstr "Εγκατάσταση" #: standalone/drakfont:493 #, fuzzy, c-format msgid "Import" msgstr "Εισαγωγή Γραμματοσειρών" #: standalone/drakfont:509 #, c-format msgid "" "Copyright (C) 2001-2002 by MandrakeSoft \n" "\n" "\n" " DUPONT Sebastien (original version)\n" "\n" " CHAUMETTE Damien \n" "\n" " VIGNAUD Thierry " msgstr "" #: standalone/drakfont:518 #, fuzzy, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA." msgstr "" "\n" " Γενικά Άδεια\n" "\n" "\n" "\n" "\n" "\n" "\n" " Γενικά Άδεια\n" "\n" " ληφθέντα Γενικά Άδεια\n" "\n" #: standalone/drakfont:534 #, c-format msgid "" "Thanks:\n" "\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" "\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" "\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: standalone/drakfont:553 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "Επιλέξτε τις εφαρμογές που θα υποστηρίζουν τις γραμματοσειρές :" #: standalone/drakfont:554 #, fuzzy, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" "Πριν εγκαταστήσετε τις γραμματοσειρές, βεβαιωθείτε ότι έχετε το δικαίωμα να " "κάνετε χρήση αυτών των γραμματοσειρών καθώς και να τις εγκαταστήσετε στον " "υπολογιστή σας\n" "\n" "-Μπορείτε να εγκαταστήσετε τις γραμματοσειρές κανονικά. Σε σπάνιες " "περιπτώσεις, εικονικές γραμματοσειρές μπορούν να παγώσουν τον εξυπηρετητή Χ." #: standalone/drakfont:564 #, c-format msgid "Ghostscript" msgstr "Ghostscript" #: standalone/drakfont:565 #, c-format msgid "StarOffice" msgstr "StarOffice" #: standalone/drakfont:566 #, c-format msgid "Abiword" msgstr "Abiword" #: standalone/drakfont:567 #, c-format msgid "Generic Printers" msgstr "Γενικοί Εκτυπωτές" #: standalone/drakfont:583 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" "Επιλέξτε το αρχείο γραμματοσειρές ή τον κατάλογο και κάντε κλικ στο " "'Προσθήκη'" #: standalone/drakfont:597 #, fuzzy, c-format msgid "You've not selected any font" msgstr "δεν βρέθηκε καμία γραμματοσειρά\n" #: standalone/drakfont:646 #, fuzzy, c-format msgid "Import fonts" msgstr "Εισαγωγή Γραμματοσειρών" #: standalone/drakfont:651 #, fuzzy, c-format msgid "Install fonts" msgstr "Απεγκατάσταση Γραμματοσειρών" #: standalone/drakfont:686 #, c-format msgid "click here if you are sure." msgstr "κάντε κλικ εδώ αν είστε βέβαιοι" #: standalone/drakfont:688 #, c-format msgid "here if no." msgstr "εδώ αν όχι." #: standalone/drakfont:727 #, c-format msgid "Unselected All" msgstr "Αποεπιλογή Όλων" #: standalone/drakfont:730 #, c-format msgid "Selected All" msgstr "Επιλογή Όλων" #: standalone/drakfont:733 #, c-format msgid "Remove List" msgstr "Λίστα Αφαίρεσης" #: standalone/drakfont:744 standalone/drakfont:763 #, fuzzy, c-format msgid "Importing fonts" msgstr "Εισαγωγή Γραμματοσειρών" #: standalone/drakfont:748 standalone/drakfont:768 #, c-format msgid "Initial tests" msgstr "Αρχικά τεστ" #: standalone/drakfont:749 #, c-format msgid "Copy fonts on your system" msgstr "Αντιγραφή γραμματοσειρών στο σύστημά σας" #: standalone/drakfont:750 #, c-format msgid "Install & convert Fonts" msgstr "Εγκατάσταση & μετατροπή Γραμματοσειρών" #: standalone/drakfont:751 #, c-format msgid "Post Install" msgstr "" #: standalone/drakfont:769 #, c-format msgid "Remove fonts on your system" msgstr "Αφαίρεση γραμματοσειρών από το σύστημά σας" #: standalone/drakfont:770 #, c-format msgid "Post Uninstall" msgstr "" #: standalone/drakgw:59 standalone/drakgw:190 #, c-format msgid "Internet Connection Sharing" msgstr "Κοινή Σύνδεση Διαδικτύου" #: standalone/drakgw:117 standalone/drakvpn:49 #, fuzzy, c-format msgid "Sorry, we support only 2.4 and above kernels." msgstr "Λυπάμαι, υποστηρίζονται μόνο οι πυρήνες 2.4" #: standalone/drakgw:128 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Κοινή Σύνδεση Διαδικτύου ενεργοποιημένη" #: standalone/drakgw:129 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" "Η ρύθμιση της κοινής σύνδεσης του Διαδικτύου έχει ήδη γίνει.\n" "Αυτή τη στιγμή είναι ενεργή.\n" "\n" "Τι θέλετε να κάνετε;" #: standalone/drakgw:133 standalone/drakvpn:99 #, c-format msgid "disable" msgstr "απενεργοποίηση" #: standalone/drakgw:133 standalone/drakgw:162 standalone/drakvpn:99 #: standalone/drakvpn:125 #, c-format msgid "reconfigure" msgstr "επαναρύθμιση" #: standalone/drakgw:133 standalone/drakgw:162 standalone/drakvpn:99 #: standalone/drakvpn:125 standalone/drakvpn:372 standalone/drakvpn:731 #, c-format msgid "dismiss" msgstr "άκυρο" #: standalone/drakgw:136 #, c-format msgid "Disabling servers..." msgstr "Απενεργοποίηση εξυπηρετητών..." #: standalone/drakgw:150 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Η Κοινή Σύνδεση Διαδικτύου τώρα απενεργοποιήθηκε." #: standalone/drakgw:157 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Κοινή Σύνδεση Διαδικτύου απενεργοποιημένη" #: standalone/drakgw:158 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" "Η ρύθμιση της κοινής χρήσης διαδικτύου έχει ήδη γίνει.\n" "Είναι απενεργοποιημένη.\n" "\n" "Τι θέλετε να κάνετε:" #: standalone/drakgw:162 standalone/drakvpn:125 #, c-format msgid "enable" msgstr "ενεργοποίηση" #: standalone/drakgw:169 #, c-format msgid "Enabling servers..." msgstr "Ενεργοποίηση εξυπηρετητών..." #: standalone/drakgw:175 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε." #: standalone/drakgw:191 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Πρόκειται να ρυθμίσετε τον υπολογιστή σας για να μοιράζεται την σύνδεσή του " "στο Διαδίκτυο.\n" "Με αυτή τη δυνατότητα άλλοι υπολογιστές στο τοπικό σας δίκτυο θα μπορούν " "νακάνουν χρήση της σύνδεσης αυτού του υπολογιστή στο Διαδίκτυο.\n" " \n" "Βεβαιωθείτε ότι έχετε ρυθμίσει το Δίκτυο/Πρόσβαση Διαδικτύου με τη χρήση του " "drakconnect πριν προχωρήσετε.\n" "\n" "Σημ. Θα πρέπει να έχετε μια κάρτα δικτύου για να ρυθμίσετε το Τοπικό σας " "Δίκτυο (LAN)." #: standalone/drakgw:211 standalone/drakvpn:210 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: standalone/drakgw:230 #, c-format msgid "Interface %s (using module %s)" msgstr "Διεπαφή %s (χρήση αρθρώματος %s)" #: standalone/drakgw:231 #, c-format msgid "Interface %s" msgstr "Διεπαφή %s" #: standalone/drakgw:241 standalone/drakpxe:138 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Δεν βρέθηκε προσαρμογέας δικτύου Ethernet στο σύστημά σας. Παρακαλώ " "χρησιμοποιείστε το πρόγραμμα ρύθμισης υλικού." #: standalone/drakgw:247 #, c-format msgid "Network interface" msgstr "Συσκευή δικτύου" #: standalone/drakgw:248 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" "Υπάρχει μόνο ένας ρυθμισμένος προσαρμογέας δικτύου στο σύστημά σας:\n" "\n" "%s\n" "\n" "Θα ρυθμιστεί το Τοπικό σας Δίκτυο με αυτόν τον προσαρμογέα." #: standalone/drakgw:255 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Παρακαλώ επιλέξτε τι προσαρμογέας δικτύου θα συνδεθεί στο τοπικό σας δίκτυο." #: standalone/drakgw:283 #, c-format msgid "Network interface already configured" msgstr "Η διεπαφή Δικτύου έχει ήδη ρυθμιστεί" #: standalone/drakgw:284 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" "Προειδοποίηση, ο προσαρμογέας δικτύου (%s) έχει ήδη ρύθμιση\n" "\n" "Θέλετε να ξαναρυθμιστεί αυτόματα ;\n" "\n" "Μπορείτε να το κάνετε και μόνοι σας αλλά πρέπει να ξέρετε τι κάνετε." #: standalone/drakgw:289 #, c-format msgid "Automatic reconfiguration" msgstr "Αυτόματη επαναρύθμισης" #: standalone/drakgw:289 #, c-format msgid "No (experts only)" msgstr "Όχι (μόνο για ειδικούς)" #: standalone/drakgw:290 #, c-format msgid "Show current interface configuration" msgstr "Προβολή της τρέχουσας ρύθμισης διεπαφή" #: standalone/drakgw:291 #, c-format msgid "Current interface configuration" msgstr "Ρύθμιση τρέχουσας διεπαφής" #: standalone/drakgw:292 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" "Τρέχουσες ρυθμίσεις του %s':\n" "\n" "Δίκτυο: %s\n" "Διεύθυνση IP : %s\n" "IP attribution: %s\n" "Οδηγός: %s" #: standalone/drakgw:305 #, fuzzy, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" "Μπορώ να κρατήσω τις τρέχουσες ρυθμίσεις και να υποθέσω ότι ήδη έχει " "ρυθμιστεί ο εξυπηρετητής DHCP, παρακαλώ ελέγξτε εάν έχω διαβάσει σωστά το " "Δίκτυο που χρησιμοποιείτε για το τοπικό σας δίκτυο, δεν θα πειράξωούτε θα " "αλλάξω τις ρυθμίσεις του εξυπηρετητή DHCP.\n" "\n" #: standalone/drakgw:312 #, c-format msgid "Local Network adress" msgstr "Τοπική διεύθυνση δικτύου" #: standalone/drakgw:316 #, fuzzy, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is." msgstr "" "Ρύθμιση Εξυπηρετητή DHCP\n" "\n" "Εδώ μπορείτε επιλέξετε τις διάφορες επιλογές στη ρύθμιση του εξυπηρετητή " "DHCP\n" "Αν δεν ξέρετε τι σημαίνει αυτό, απλά αφήστε το ως έχει\n" "\n" #: standalone/drakgw:320 #, c-format msgid "(This) DHCP Server IP" msgstr "(Αυτή τη) IP του εξυπηρετητή DHCP" #: standalone/drakgw:321 #, c-format msgid "The DNS Server IP" msgstr "Η IP του εξυπηρετητή DNS" #: standalone/drakgw:322 #, c-format msgid "The internal domain name" msgstr "Το εσωτερικό όνομα τομέα" #: standalone/drakgw:323 #, c-format msgid "The DHCP start range" msgstr "To όριο εκκίνησης DHCP" #: standalone/drakgw:324 #, c-format msgid "The DHCP end range" msgstr "To όριο τερματισμού DHCP" #: standalone/drakgw:325 #, c-format msgid "The default lease (in seconds)" msgstr "Η προκαθορισμένη μίσθωση (σε δευτερόλεπτα)" #: standalone/drakgw:326 #, c-format msgid "The maximum lease (in seconds)" msgstr "Η μέγιστη μίσθωση (σε δευτερόλεπτα)" #: standalone/drakgw:327 #, c-format msgid "Re-configure interface and DHCP server" msgstr "Επαναρύθμιση διεπαφής και του εξυπηρετητή DHCP" #: standalone/drakgw:334 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "Το Τοπικό Δίκτυο δεν τελειώνει με `.0', τερματισμός." #: standalone/drakgw:344 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Πιθανή διπλής διεύθυνσης LAN στην τρέχουσα ρύθμιση του %s!\n" #: standalone/drakgw:354 #, c-format msgid "Configuring..." msgstr "Ρύθμιση..." #: standalone/drakgw:355 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Ρύθμιση, εγκατάσταση λογισμικού, εκκίνηση εξυπηρετητών..." #: standalone/drakgw:391 standalone/drakpxe:231 standalone/drakvpn:274 #, c-format msgid "Problems installing package %s" msgstr "Πρόβλημα κατά την εγκατάσταση του πακέτου %s" #: standalone/drakgw:584 #, fuzzy, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP) and\n" " a Transparent Proxy Cache server (SQUID)." msgstr "" "Όλα έχουν ρυθμιστεί.\n" "Μπορείτε τώρα να μοιράζεστε τη σύνδεσή σας στο Διαδίκτυο με άλλους " "υπολογιστές στο τοπικό σας δίκτυο, με την χρήση αυτόματης ρύθμισης δικτύου " "(DHCP)." #: standalone/drakhelp:17 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003-2004 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: standalone/drakhelp:22 #, c-format msgid " --help - display this help \n" msgstr "" #: standalone/drakhelp:23 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: standalone/drakhelp:24 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: standalone/drakhelp:35 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: standalone/drakhelp:41 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" "Δεν βρέθηκε περιηγητής στο σύστημά σας, Παρακαλώ εγκαταστήστε έναν αν θέλετε " "να περιηγηθείτε στο σύστημα βοήθειας" #: standalone/drakperm:21 #, fuzzy, c-format msgid "System settings" msgstr "Προσαρμοσμένες κατατμήσεις δίσκου" #: standalone/drakperm:22 #, fuzzy, c-format msgid "Custom settings" msgstr "Προσαρμοσμένες κατατμήσεις δίσκου" #: standalone/drakperm:23 #, fuzzy, c-format msgid "Custom & system settings" msgstr "Προσαρμοσμένες κατατμήσεις δίσκου" #: standalone/drakperm:43 #, fuzzy, c-format msgid "Editable" msgstr "απενεργοποίηση" #: standalone/drakperm:48 standalone/drakperm:315 #, c-format msgid "Path" msgstr "Θέση" #: standalone/drakperm:48 standalone/drakperm:250 #, c-format msgid "User" msgstr "Χρήστης" #: standalone/drakperm:48 standalone/drakperm:250 #, fuzzy, c-format msgid "Group" msgstr "oμάδα" #: standalone/drakperm:48 standalone/drakperm:327 #, c-format msgid "Permissions" msgstr "Δικαιώματα" #: standalone/drakperm:107 #, fuzzy, c-format msgid "" "Here you can see files to use in order to fix permissions, owners, and " "groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" "Το Drakperm χρησιμοποιείται για να δείτε τα αρχεία που χρειάζεστε για να " "φτιάξετε δικαιώματα, ιδιοκτήτες και ομάδες με το msec.\n" "Επίσης μπορείτε να επεξεργαστείτε τους δικούς σας κανόνες που θα " "αντικαταστήσουν τους προεπιλεγμένους κανόνες." #: standalone/drakperm:110 #, c-format msgid "" "The current security level is %s.\n" "Select permissions to see/edit" msgstr "" #: standalone/drakperm:121 #, c-format msgid "Up" msgstr "Πάνω" #: standalone/drakperm:121 #, c-format msgid "Move selected rule up one level" msgstr "Μετακίνηση του επιλεγμένου κανόνα ένα επίπεδο πάνω" #: standalone/drakperm:122 #, c-format msgid "Down" msgstr "Κάτω" #: standalone/drakperm:122 #, c-format msgid "Move selected rule down one level" msgstr "Μετακίνηση του επιλεγμένου κανόνα ένα επίπεδο κάτω" #: standalone/drakperm:123 #, fuzzy, c-format msgid "Add a rule" msgstr "Προσθήκη ενός κανόνα" #: standalone/drakperm:123 #, c-format msgid "Add a new rule at the end" msgstr "Προσθήκη νέου κανόνα στο τέλος" #: standalone/drakperm:124 #, c-format msgid "Delete selected rule" msgstr "Διαγραφή επιλεγμένου κανόνα" #: standalone/drakperm:125 standalone/drakvpn:329 standalone/drakvpn:690 #: standalone/printerdrake:229 #, fuzzy, c-format msgid "Edit" msgstr "Έξοδος" #: standalone/drakperm:125 #, c-format msgid "Edit current rule" msgstr "" #: standalone/drakperm:242 #, c-format msgid "browse" msgstr "αναζήτηση" #: standalone/drakperm:252 #, fuzzy, c-format msgid "Read" msgstr "Μόνο για ανάγνωση" #: standalone/drakperm:253 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: standalone/drakperm:256 #, fuzzy, c-format msgid "Write" msgstr "Εγγραφή %s" #: standalone/drakperm:257 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: standalone/drakperm:260 #, c-format msgid "Execute" msgstr "" #: standalone/drakperm:261 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: standalone/drakperm:263 #, c-format msgid "Sticky-bit" msgstr "" #: standalone/drakperm:263 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: standalone/drakperm:264 #, c-format msgid "Set-UID" msgstr "Ορισμός UID" #: standalone/drakperm:264 #, c-format msgid "Use owner id for execution" msgstr "Χρήση id κατόχου για εκτέλεση" #: standalone/drakperm:265 #, c-format msgid "Set-GID" msgstr "Ορισμός GID" #: standalone/drakperm:265 #, c-format msgid "Use group id for execution" msgstr "Χρήση id ομάδας για εκτέλεση" #: standalone/drakperm:283 #, fuzzy, c-format msgid "User :" msgstr "χρήστης :" #: standalone/drakperm:285 #, fuzzy, c-format msgid "Group :" msgstr "ομάδα :" #: standalone/drakperm:289 #, c-format msgid "Current user" msgstr "Τρέχον χρήστη" #: standalone/drakperm:290 #, fuzzy, c-format msgid "When checked, owner and group won't be changed" msgstr "όταν επιλεγεί, ο ιδιοκτήτης και ομάδα δεν θα αλλάξουν" #: standalone/drakperm:301 #, c-format msgid "Path selection" msgstr "Επιλογή Θέσης" #: standalone/drakperm:321 #, c-format msgid "Property" msgstr "Ιδιότητα" #: standalone/drakpxe:55 #, c-format msgid "PXE Server Configuration" msgstr "Ρυθμίσεις Διακομιστή PXE" #: standalone/drakpxe:111 #, c-format msgid "Installation Server Configuration" msgstr "Εγκατάσταση Ρυθμίσεων Διακομιστή" #: standalone/drakpxe:112 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Πρόκειται να ρυθμίστε τον υπολογιστή σας για την εγκατάσταση το διακομιστή " "PXE ως εξυπηρετητή DHCP \n" "και διακομιστή TFTP ως διακομιστή εγκαταστάσεων.\n" "Με αυτή την επιλογή, άλλοι υπολογιστές στο τοπικό σας δίκτυο θα μπορούν να " "εγκατασταθούν με τη χρήση αυτού του υπολογιστή.\n" "\n" "Βεβαιωθείτε ότι έχετε ρυθμίσει την πρόσβαση στο Δίκτυο/Διαδίκτυο με τη χρήση " "του drakconnect πριν προχωρήσετε.\n" "\n" "Σημ. Θα πρέπει να έχετε μια κάρτα δικτύου για να ρυθμίσετε το Τοπικό σας " "Δίκτυο (LAN)." #: standalone/drakpxe:143 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Παρακαλώ επιλέξτε ποια διεπαφή δικτύου θα χρησιμοποιήσετε για τον " "εξυπηρετητή dhcp." #: standalone/drakpxe:144 #, c-format msgid "Interface %s (on network %s)" msgstr "Διεπαφή %s (στο δίκτυο %s)" #: standalone/drakpxe:169 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" "Ο εξυπηρετητής DHCP θα επιτρέπει άλλους υπολογιστές να ξεκινούν με τη χρήση " "του PXE με μια δοθείσα διεύθυνση\n" "\n" "Η διεύθυνση δικτύου είναι %s με χρήση μάσκα δικτύου%s.\n" "\n" #: standalone/drakpxe:173 #, c-format msgid "The DHCP start ip" msgstr "Η IP εκκίνησης του DHCP" #: standalone/drakpxe:174 #, c-format msgid "The DHCP end ip" msgstr "Η τελευταία ip του DHCP" #: standalone/drakpxe:187 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" "Παρακαλώ δηλώστε τη θέση που θα είναι προσβάσιμη η εικόνας εγκατάστασης.\n" "\n" "Αν δεν έχετε έναν υπάρχον κατάλογο, παρακαλώ αντιγράψετε τα περιεχόμενα του " "CD or DVD.\n" "\n" #: standalone/drakpxe:192 #, c-format msgid "Installation image directory" msgstr "Εγκατάσταση καταλόγου εικόνας" #: standalone/drakpxe:196 #, c-format msgid "No image found" msgstr "Δεν βρέθηκε εικόνα" #: standalone/drakpxe:197 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" "Δεν βρέθηκαν εικόνες CD ή DVD, παρακαλώ αντιγράψτε το πρόγραμμα εγκατάστασης " "και τα αρχεία rpm." #: standalone/drakpxe:210 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" "Παρακαλώ δηλώστε τη θέση του αρχείου auto_install.cfg file is located.\n" "\n" "Αφήστε το κενό αν δεν θέλετε να κάνετε χρήση της αυτόματης εγκατάστασης.\n" "\n" #: standalone/drakpxe:215 #, c-format msgid "Location of auto_install.cfg file" msgstr "Θέση του αρχείου auto_install.cfg" #: standalone/draksec:44 #, c-format msgid "ALL" msgstr "" #: standalone/draksec:44 #, c-format msgid "LOCAL" msgstr "" #: standalone/draksec:44 #, c-format msgid "default" msgstr "εξ' ορισμού" #: standalone/draksec:44 #, fuzzy, c-format msgid "ignore" msgstr "Σιγγαπούρη" #: standalone/draksec:44 #, fuzzy, c-format msgid "no" msgstr "Πληροφορίες" #: standalone/draksec:44 #, fuzzy, c-format msgid "yes" msgstr "Ναι" #: standalone/draksec:70 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: standalone/draksec:118 #, c-format msgid "(default value: %s)" msgstr "(Προεπιλεγμένη τιμή: %s)" #: standalone/draksec:159 #, c-format msgid "Security Level:" msgstr "Επίπεδο ασφαλείας:" #: standalone/draksec:162 #, c-format msgid "Security Alerts:" msgstr "Ειδοποιήσεις Ασφαλείας:" #: standalone/draksec:166 #, c-format msgid "Security Administrator:" msgstr "Διαχειριστής Ασφαλείας:" #: standalone/draksec:168 #, fuzzy, c-format msgid "Basic options" msgstr "Βασικές Επιλογές DrakSec" #: standalone/draksec:181 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" "Οι παρακάτω επιλογές ασφαλείας μπορούν να επιλεγούν\n" "για την προσαρμογή της ασφάλειας. Για επεξηγήσεις δείτε την βοήθεια.\n" #: standalone/draksec:183 #, c-format msgid "Network Options" msgstr "Επιλογές Δικτύου" #: standalone/draksec:183 #, c-format msgid "System Options" msgstr "Επιλογές Συστήματος" #: standalone/draksec:229 #, c-format msgid "Periodic Checks" msgstr "Περιοδικοί Έλεγχοι" #: standalone/draksec:247 #, c-format msgid "Please wait, setting security level..." msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..." #: standalone/draksec:253 #, c-format msgid "Please wait, setting security options..." msgstr "Παρακαλώ περιμένετε, ορίζονται οι επιλογές ασφαλείας..." #: standalone/draksound:47 #, c-format msgid "No Sound Card detected!" msgstr "Δεν βρέθηκε Κάρτα Ήχου!" #: standalone/draksound:48 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Δεν βρέθηκε συσκευή Κάρτας 'Ήχου στο μηχάνημά σας. Παρακαλώ βεβαιωθείτε ότι " "η υποστηριζόμενη Κάρτα Ήχου σας είναι σωστά τοποθετημένη.\n" "\n" "\n" "Μπορείτε να επισκεφτείτε τη βάση δεδομένων υλικού στο:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/draksound:55 #, fuzzy, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or " "the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console." msgstr "" "\n" "\n" "\n" "Σημείωση: Αν έχετε κάρτα ήχου ISA PnP, θα πρέπει να εκτελέσετε το πρόγραμμα " "sndconfig. Απλά γράψτε \"sndconfig\" σε μια κονσόλα." #: standalone/draksplash:21 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" "το πακέτο 'ImageMagick' είναι απαραίτητο για την ολοκλήρωση της ρύθμισης.\n" "Κάντε κλικ στο \"Εντάξει\" για να εγκαταστήσετε το ή \"Άκυρο\" για έξοδο" #: standalone/draksplash:67 #, c-format msgid "first step creation" msgstr "πρώτο βήμα δημιουργίας" #: standalone/draksplash:70 #, c-format msgid "final resolution" msgstr "τελική ανάλυση" #: standalone/draksplash:71 standalone/draksplash:165 #, c-format msgid "choose image file" msgstr "Επιλέξτε μια εικόνα" #: standalone/draksplash:72 #, c-format msgid "Theme name" msgstr "Όνομα θέματος" #: standalone/draksplash:77 #, c-format msgid "Browse" msgstr "Αναζήτηση" #: standalone/draksplash:87 standalone/draksplash:153 #, c-format msgid "Configure bootsplash picture" msgstr "Ρύθμιση εικόνας bootsplash" #: standalone/draksplash:90 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" "συντεταγμένη x του πλαισίου κειμένου\n" "σε αριθμό χαρακτήρων" #: standalone/draksplash:91 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" "συντεταγμένη y του πλαισίου κειμένου\n" "σε αριθμό χαρακτήρων" #: standalone/draksplash:92 #, c-format msgid "text width" msgstr "πλάτος κειμένου" #: standalone/draksplash:93 #, c-format msgid "text box height" msgstr "ύψος πλαισίου κειμένου" #: standalone/draksplash:94 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" "συντεταγμένη y της γραμμής προόδου\n" "από την επάνω αριστερή γωνία" #: standalone/draksplash:95 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" "συντεταγμένη y της γραμμής προόδου\n" "από την επάνω αριστερή γωνία" #: standalone/draksplash:96 #, c-format msgid "the width of the progress bar" msgstr "το πλάτος της γραμμής προόδου" #: standalone/draksplash:97 #, c-format msgid "the height of the progress bar" msgstr "το ύψος της γραμμής προόδου" #: standalone/draksplash:98 #, c-format msgid "the color of the progress bar" msgstr "Το χρώμα της γραμμής προόδου" #: standalone/draksplash:113 #, c-format msgid "Preview" msgstr "Προεπισκόπηση" #: standalone/draksplash:115 #, c-format msgid "Save theme" msgstr "Aποθήκευση θέματος" #: standalone/draksplash:116 #, c-format msgid "Choose color" msgstr "Επιλέξτε χρώμα" #: standalone/draksplash:119 #, c-format msgid "Display logo on Console" msgstr "Εμφάνιση λογότυπου στην Κονσόλα" #: standalone/draksplash:120 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: standalone/draksplash:156 standalone/draksplash:320 #: standalone/draksplash:448 #, c-format msgid "Notice" msgstr "Σημείωση" #: standalone/draksplash:156 standalone/draksplash:320 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "Αυτό το θέμα δεν έχει ακόμα κάποιο bootsplash στο %s !" #: standalone/draksplash:162 #, c-format msgid "choose image" msgstr "επιλέξτε εικόνα" #: standalone/draksplash:204 #, c-format msgid "saving Bootsplash theme..." msgstr "αποθήκευση θέματος Bootsplash ..." #: standalone/draksplash:428 #, c-format msgid "ProgressBar color selection" msgstr "Επιλογή χρώματος γραμμής προόδου" #: standalone/draksplash:448 #, c-format msgid "You must choose an image file first!" msgstr "Πρέπει να επιλέξτε πρώτα μια εικόνα!" #: standalone/draksplash:453 #, c-format msgid "Generating preview ..." msgstr "Δημιουργία προεπισκόπησης ..." #: standalone/draksplash:499 #, c-format msgid "%s BootSplash (%s) preview" msgstr "%s Προεπισκόπηση (%s)Bootsplash" #: standalone/drakvpn:71 #, fuzzy, c-format msgid "DrakVPN" msgstr "Dvorak (ΗΠΑ)" #: standalone/drakvpn:93 #, fuzzy, c-format msgid "The VPN connection is enabled." msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε." #: standalone/drakvpn:94 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently enabled.\n" "\n" "What would you like to do ?" msgstr "" "Η ρύθμιση της κοινής σύνδεσης του Διαδικτύου έχει ήδη γίνει.\n" "Αυτή τη στιγμή είναι ενεργή.\n" "\n" "Τι θέλετε να κάνετε;" #: standalone/drakvpn:103 #, fuzzy, c-format msgid "Disabling VPN..." msgstr "Απενεργοποίηση εξυπηρετητών..." #: standalone/drakvpn:112 #, fuzzy, c-format msgid "The VPN connection is now disabled." msgstr "Η Κοινή Σύνδεση Διαδικτύου τώρα απενεργοποιήθηκε." #: standalone/drakvpn:119 #, fuzzy, c-format msgid "VPN connection currently disabled" msgstr "Κοινή Σύνδεση Διαδικτύου απενεργοποιημένη" #: standalone/drakvpn:120 #, fuzzy, c-format msgid "" "The setup of a VPN connection has already been done.\n" "\n" "It's currently disabled.\n" "\n" "What would you like to do ?" msgstr "" "Η ρύθμιση της κοινής χρήσης διαδικτύου έχει ήδη γίνει.\n" "Είναι απενεργοποιημένη.\n" "\n" "Τι θέλετε να κάνετε:" #: standalone/drakvpn:133 #, fuzzy, c-format msgid "Enabling VPN..." msgstr "Ενεργοποίηση εξυπηρετητών..." #: standalone/drakvpn:139 #, fuzzy, c-format msgid "The VPN connection is now enabled." msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε." #: standalone/drakvpn:153 standalone/drakvpn:179 #, c-format msgid "Simple VPN setup." msgstr "" #: standalone/drakvpn:154 #, c-format msgid "" "You are about to configure your computer to use a VPN connection.\n" "\n" "With this feature, computers on your local private network and computers\n" "on some other remote private networks, can share resources, through\n" "their respective firewalls, over the Internet, in a secure manner. \n" "\n" "The communication over the Internet is encrypted. The local and remote\n" "computers look as if they were on the same network.\n" "\n" "Make sure you have configured your Network/Internet access using\n" "drakconnect before going any further." msgstr "" #: standalone/drakvpn:180 #, c-format msgid "" "VPN connection.\n" "\n" "This program is based on the following projects:\n" " - FreeSwan: \t\t\thttp://www.freeswan.org/\n" " - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n" " - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n" " - ipsec-howto: \t\thttp://www.ipsec-howto.org\n" " - the docs and man pages coming with the %s package\n" "\n" "Please read AT LEAST the ipsec-howto docs\n" "before going any further." msgstr "" #: standalone/drakvpn:192 #, fuzzy, c-format msgid "Kernel module." msgstr "Απομάκρυνση αρθρώματος" #: standalone/drakvpn:193 #, c-format msgid "" "The kernel need to have ipsec support.\n" "\n" "You're running a %s kernel version.\n" "\n" "This kernel has '%s' support." msgstr "" #: standalone/drakvpn:288 #, fuzzy, c-format msgid "Security Policies" msgstr "Ειδοποιήσεις Ασφαλείας:" #: standalone/drakvpn:288 #, c-format msgid "IKE daemon racoon" msgstr "" #: standalone/drakvpn:291 standalone/drakvpn:302 #, fuzzy, c-format msgid "Configuration file" msgstr "Ρύθμιση" #: standalone/drakvpn:292 #, c-format msgid "" "Configuration step !\n" "\n" "You need to define the Security Policies and then to \n" "configure the automatic key exchange (IKE) daemon. \n" "The KAME IKE daemon we're using is called 'racoon'.\n" "\n" "What would you like to configure ?\n" msgstr "" #: standalone/drakvpn:303 #, c-format msgid "" "Next, we will configure the %s file.\n" "\n" "\n" "Simply click on Next.\n" msgstr "" #: standalone/drakvpn:321 standalone/drakvpn:681 #, fuzzy, c-format msgid "%s entries" msgstr ", %s τομείς" #: standalone/drakvpn:322 #, c-format msgid "" "The %s file contents\n" "is divided into sections.\n" "\n" "You can now :\n" "\n" " - display, add, edit, or remove sections, then\n" " - commit the changes\n" "\n" "What would you like to do ?\n" msgstr "" #: standalone/drakvpn:329 standalone/drakvpn:690 #, fuzzy, c-format msgid "Display" msgstr "καθημερινά" #: standalone/drakvpn:329 standalone/drakvpn:690 #, fuzzy, c-format msgid "Commit" msgstr "συμπαγής" #: standalone/drakvpn:343 standalone/drakvpn:347 standalone/drakvpn:705 #: standalone/drakvpn:709 #, fuzzy, c-format msgid "Display configuration" msgstr "Ρύθμιση LAN" #: standalone/drakvpn:348 #, c-format msgid "" "The %s file does not exist.\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose 'add'.\n" msgstr "" #: standalone/drakvpn:364 #, c-format msgid "ipsec.conf entries" msgstr "" #: standalone/drakvpn:365 #, c-format msgid "" "The %s file contains different sections.\n" "\n" "Here is its skeleton :\t'config setup' \n" "\t\t\t\t\t'conn default' \n" "\t\t\t\t\t'normal1'\n" "\t\t\t\t\t'normal2' \n" "\n" "You can now add one of these sections.\n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:372 #, fuzzy, c-format msgid "config setup" msgstr "επαναρύθμιση" #: standalone/drakvpn:372 #, fuzzy, c-format msgid "conn %default" msgstr "εξ' ορισμού" #: standalone/drakvpn:372 #, fuzzy, c-format msgid "normal conn" msgstr "Κανονική Κατάσταση" #: standalone/drakvpn:378 standalone/drakvpn:419 standalone/drakvpn:506 #, fuzzy, c-format msgid "Exists !" msgstr "Έξοδος" #: standalone/drakvpn:379 standalone/drakvpn:420 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change its name.\n" msgstr "" #: standalone/drakvpn:396 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow this config\n" "setup section.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:401 #, fuzzy, c-format msgid "interfaces" msgstr "Διεπαφή" #: standalone/drakvpn:402 #, c-format msgid "klipsdebug" msgstr "" #: standalone/drakvpn:403 #, c-format msgid "plutodebug" msgstr "" #: standalone/drakvpn:404 #, c-format msgid "plutoload" msgstr "" #: standalone/drakvpn:405 #, c-format msgid "plutostart" msgstr "" #: standalone/drakvpn:406 #, c-format msgid "uniqueids" msgstr "" #: standalone/drakvpn:440 #, c-format msgid "" "This is the first section after the config\n" "setup one.\n" "\n" "Here you define the default settings. \n" "All the other sections will follow this one.\n" "The left settings are optional. If don't define\n" "them here, globally, you can define them in each\n" "section.\n" msgstr "" #: standalone/drakvpn:447 #, c-format msgid "pfs" msgstr "" #: standalone/drakvpn:448 #, c-format msgid "keyingtries" msgstr "" #: standalone/drakvpn:449 #, c-format msgid "compress" msgstr "" #: standalone/drakvpn:450 #, c-format msgid "disablearrivalcheck" msgstr "" #: standalone/drakvpn:451 standalone/drakvpn:490 #, fuzzy, c-format msgid "left" msgstr "Διαγραφή" #: standalone/drakvpn:452 standalone/drakvpn:491 #, c-format msgid "leftcert" msgstr "" #: standalone/drakvpn:453 standalone/drakvpn:492 #, c-format msgid "leftrsasigkey" msgstr "" #: standalone/drakvpn:454 standalone/drakvpn:493 #, c-format msgid "leftsubnet" msgstr "" #: standalone/drakvpn:455 standalone/drakvpn:494 #, c-format msgid "leftnexthop" msgstr "" #: standalone/drakvpn:484 #, c-format msgid "" "Your %s file has several sections, or connections.\n" "\n" "You can now add a new section.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:487 #, fuzzy, c-format msgid "section name" msgstr "Όνομα σύνδεσης" #: standalone/drakvpn:488 #, fuzzy, c-format msgid "authby" msgstr "Θέση" #: standalone/drakvpn:489 #, fuzzy, c-format msgid "auto" msgstr "Δημιουργός:" #: standalone/drakvpn:495 #, fuzzy, c-format msgid "right" msgstr "Υψηλό" #: standalone/drakvpn:496 #, fuzzy, c-format msgid "rightcert" msgstr "Υψηλότερο" #: standalone/drakvpn:497 #, c-format msgid "rightrsasigkey" msgstr "" #: standalone/drakvpn:498 #, c-format msgid "rightsubnet" msgstr "" #: standalone/drakvpn:499 #, c-format msgid "rightnexthop" msgstr "" #: standalone/drakvpn:507 #, c-format msgid "" "A section with this name already exists.\n" "The section names have to be unique.\n" "\n" "You'll have to go back and add another section\n" "or change the name of the section.\n" msgstr "" #: standalone/drakvpn:539 #, c-format msgid "" "Add a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:572 standalone/drakvpn:822 #, fuzzy, c-format msgid "Edit section" msgstr "Επιλογή Θέσης" #: standalone/drakvpn:573 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to edit \n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:576 standalone/drakvpn:656 standalone/drakvpn:827 #: standalone/drakvpn:873 #, fuzzy, c-format msgid "Section names" msgstr "Όνομα σύνδεσης" #: standalone/drakvpn:586 #, fuzzy, c-format msgid "Can't edit !" msgstr "Δεν βρέθηκε το %s στο %s" #: standalone/drakvpn:587 #, c-format msgid "" "You cannot edit this section.\n" "\n" "This section is mandatory for Freswan 2.X.\n" "One has to specify version 2.0 on the top\n" "of the %s file, and eventually, disable or\n" "enable the oportunistic encryption.\n" msgstr "" #: standalone/drakvpn:596 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the config setup section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:607 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the default section entries.\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:620 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can now edit the normal section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:641 #, c-format msgid "" "Edit a Security Policy.\n" "\n" "You can now add a Security Policy.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:652 standalone/drakvpn:869 #, fuzzy, c-format msgid "Remove section" msgstr "Λίστα Αφαίρεσης" #: standalone/drakvpn:653 standalone/drakvpn:870 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here below the one you want to remove\n" "and then click on next.\n" msgstr "" #: standalone/drakvpn:682 #, c-format msgid "" "The racoon.conf file configuration.\n" "\n" "The contents of this file is divided into sections.\n" "You can now :\n" " - display \t\t (display the file contents)\n" " - add\t\t\t (add one section)\n" " - edit \t\t\t (modify parameters of an existing section)\n" " - remove \t\t (remove an existing section)\n" " - commit \t\t (writes the changes to the real file)" msgstr "" #: standalone/drakvpn:710 #, c-format msgid "" "The %s file does not exist\n" "\n" "This must be a new configuration.\n" "\n" "You'll have to go back and choose configure.\n" msgstr "" #: standalone/drakvpn:724 #, c-format msgid "racoonf.conf entries" msgstr "" #: standalone/drakvpn:725 #, c-format msgid "" "The 'add' sections step.\n" "\n" "Here below is the racoon.conf file skeleton :\n" "\t'path'\n" "\t'remote'\n" "\t'sainfo' \n" "\n" "Choose the section you would like to add.\n" msgstr "" #: standalone/drakvpn:731 #, fuzzy, c-format msgid "path" msgstr "Θέση" #: standalone/drakvpn:731 #, fuzzy, c-format msgid "remote" msgstr "Αφαίρεσης" #: standalone/drakvpn:731 #, fuzzy, c-format msgid "sainfo" msgstr "Πληροφορίες" #: standalone/drakvpn:739 #, c-format msgid "" "The 'add path' section step.\n" "\n" "The path sections have to be on top of your racoon.conf file.\n" "\n" "Put your mouse over the certificate entry to obtain online help." msgstr "" #: standalone/drakvpn:742 #, fuzzy, c-format msgid "path type" msgstr "Αλλαγή τύπου" #: standalone/drakvpn:746 #, c-format msgid "" "path include path : specifies a path to include\n" "a file. See File Inclusion.\n" "\tExample: path include '/etc/racoon'\n" "\n" "path pre_shared_key file : specifies a file containing\n" "pre-shared key(s) for various ID(s). See Pre-shared key File.\n" "\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n" "\n" "path certificate path : racoon(8) will search this directory\n" "if a certificate or certificate request is received.\n" "\tExample: path certificate '/etc/cert' ;\n" "\n" "File Inclusion : include file \n" "other configuration files can be included.\n" "\tExample: include \"remote.conf\" ;\n" "\n" "Pre-shared key File : Pre-shared key file defines a pair\n" "of the identifier and the shared secret key which are used at\n" "Pre-shared key authentication method in phase 1." msgstr "" #: standalone/drakvpn:766 #, fuzzy, c-format msgid "real file" msgstr "Επιλέξτε αρχείο" #: standalone/drakvpn:789 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your racoon.conf file.\n" "\n" "You can now choose the remote settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:806 #, c-format msgid "" "Make sure you already have the path sections\n" "on the top of your %s file.\n" "\n" "You can now choose the sainfo settings.\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:823 #, c-format msgid "" "Your %s file has several sections or connections.\n" "\n" "You can choose here in the list below the one you want\n" "to edit and then click on next.\n" msgstr "" #: standalone/drakvpn:834 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "\n" "You can now edit the remote section entries.\n" "\n" "Choose continue when you are done to write the data.\n" msgstr "" #: standalone/drakvpn:843 #, c-format msgid "" "Your %s file has several sections.\n" "\n" "You can now edit the sainfo section entries.\n" "\n" "Choose continue when you are done to write the data." msgstr "" #: standalone/drakvpn:851 #, c-format msgid "" "This section has to be on top of your\n" "%s file.\n" "\n" "Make sure all other sections follow these path\n" "sections.\n" "\n" "You can now edit the path entries.\n" "\n" "Choose continue or previous when you are done.\n" msgstr "" #: standalone/drakvpn:858 #, c-format msgid "path_type" msgstr "" #: standalone/drakvpn:859 #, fuzzy, c-format msgid "real_file" msgstr "Επιλέξτε αρχείο" #: standalone/drakvpn:899 #, c-format msgid "" "Everything has been configured.\n" "\n" "You may now share resources through the Internet,\n" "in a secure way, using a VPN connection.\n" "\n" "You should make sure that that the tunnels shorewall\n" "section is configured." msgstr "" #: standalone/drakvpn:919 #, c-format msgid "Sainfo source address" msgstr "" #: standalone/drakvpn:920 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.209 is the source address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.1.0/24 is the source address" msgstr "" #: standalone/drakvpn:937 #, fuzzy, c-format msgid "Sainfo source protocol" msgstr "Ευρωπαϊκό πρωτόκολλο" #: standalone/drakvpn:938 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe first 'any' allows any protocol for the source" msgstr "" #: standalone/drakvpn:952 #, c-format msgid "Sainfo destination address" msgstr "" #: standalone/drakvpn:953 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\t203.178.141.218 is the destination address\n" "\n" "sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n" "\t172.16.2.0/24 is the destination address" msgstr "" #: standalone/drakvpn:970 #, fuzzy, c-format msgid "Sainfo destination protocol" msgstr "Εργαλείο Μετάβασης Windows " #: standalone/drakvpn:971 #, c-format msgid "" "sainfo (source_id destination_id | anonymous) { statements }\n" "defines the parameters of the IKE phase 2\n" "(IPsec-SA establishment).\n" "\n" "source_id and destination_id are constructed like:\n" "\n" "\taddress address [/ prefix] [[port]] ul_proto\n" "\n" "Examples : \n" "\n" "sainfo anonymous (accepts connections from anywhere)\n" "\tleave blank this entry if you want anonymous\n" "\n" "sainfo address 203.178.141.209 any address 203.178.141.218 any\n" "\tthe last 'any' allows any protocol for the destination" msgstr "" #: standalone/drakvpn:985 #, c-format msgid "PFS group" msgstr "" #: standalone/drakvpn:987 #, c-format msgid "" "define the group of Diffie-Hellman exponentiations.\n" "If you do not require PFS then you can omit this directive.\n" "Any proposal will be accepted if you do not specify one.\n" "group is one of following: modp768, modp1024, modp1536.\n" "Or you can define 1, 2, or 5 as the DH group number." msgstr "" #: standalone/drakvpn:992 #, fuzzy, c-format msgid "Lifetime number" msgstr "ένας αριθμός" #: standalone/drakvpn:993 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will be not proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples : \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour;\n" "\n" "So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n" msgstr "" #: standalone/drakvpn:1009 #, c-format msgid "Lifetime unit" msgstr "" #: standalone/drakvpn:1011 #, c-format msgid "" "define a lifetime of a certain time which will be pro-\n" "posed in the phase 1 negotiations. Any proposal will be\n" "accepted, and the attribute(s) will be not proposed to\n" "the peer if you do not specify it(them). They can be\n" "individually specified in each proposal.\n" "\n" "Examples : \n" "\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 1 min; # sec,min,hour\n" " lifetime time 30 sec;\n" " lifetime time 30 sec;\n" " lifetime time 60 sec;\n" "\tlifetime time 12 hour ;\n" "\n" "So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and " "'hour'.\n" msgstr "" #: standalone/drakvpn:1027 standalone/drakvpn:1112 #, fuzzy, c-format msgid "Encryption algorithm" msgstr "Πιστοποίηση" #: standalone/drakvpn:1029 #, fuzzy, c-format msgid "Authentication algorithm" msgstr "Πιστοποίηση" #: standalone/drakvpn:1031 #, c-format msgid "Compression algorithm" msgstr "" #: standalone/drakvpn:1039 #, fuzzy, c-format msgid "Remote" msgstr "Αφαίρεσης" #: standalone/drakvpn:1040 #, c-format msgid "" "remote (address | anonymous) [[port]] { statements }\n" "specifies the parameters for IKE phase 1 for each remote node.\n" "The default port is 500. If anonymous is specified, the state-\n" "ments apply to all peers which do not match any other remote\n" "directive.\n" "\n" "Examples : \n" "\n" "remote anonymous\n" "remote ::1 [8000]" msgstr "" #: standalone/drakvpn:1048 #, fuzzy, c-format msgid "Exchange mode" msgstr "Τρόπος κλήσης" #: standalone/drakvpn:1050 #, c-format msgid "" "defines the exchange mode for phase 1 when racoon is the\n" "initiator. Also it means the acceptable exchange mode\n" "when racoon is responder. More than one mode can be\n" "specified by separating them with a comma. All of the\n" "modes are acceptable. The first exchange mode is what\n" "racoon uses when it is the initiator.\n" msgstr "" #: standalone/drakvpn:1056 #, fuzzy, c-format msgid "Generate policy" msgstr "Ασφάλεια" #: standalone/drakvpn:1058 #, c-format msgid "" "This directive is for the responder. Therefore you\n" "should set passive on in order that racoon(8) only\n" "becomes a responder. If the responder does not have any\n" "policy in SPD during phase 2 negotiation, and the direc-\n" "tive is set on, then racoon(8) will choice the first pro-\n" "posal in the SA payload from the initiator, and generate\n" "policy entries from the proposal. It is useful to nego-\n" "tiate with the client which is allocated IP address\n" "dynamically. Note that inappropriate policy might be\n" "installed into the responder's SPD by the initiator. So\n" "that other communication might fail if such policies\n" "installed due to some policy mismatches between the ini-\n" "tiator and the responder. This directive is ignored in\n" "the initiator case. The default value is off." msgstr "" #: standalone/drakvpn:1072 #, fuzzy, c-format msgid "Passive" msgstr "Τμήμα Splash" #: standalone/drakvpn:1074 #, c-format msgid "" "If you do not want to initiate the negotiation, set this\n" "to on. The default value is off. It is useful for a\n" "server." msgstr "" #: standalone/drakvpn:1077 #, c-format msgid "Certificate type" msgstr "" #: standalone/drakvpn:1079 #, fuzzy, c-format msgid "My certfile" msgstr "Επιλέξτε αρχείο" #: standalone/drakvpn:1080 #, fuzzy, c-format msgid "Name of the certificate" msgstr "Όνομα εκτυπωτή" #: standalone/drakvpn:1081 #, c-format msgid "My private key" msgstr "" #: standalone/drakvpn:1082 #, fuzzy, c-format msgid "Name of the private key" msgstr "Όνομα εκτυπωτή" #: standalone/drakvpn:1083 #, fuzzy, c-format msgid "Peers certfile" msgstr "Επιλέξτε αρχείο" #: standalone/drakvpn:1084 #, c-format msgid "Name of the peers certificate" msgstr "" #: standalone/drakvpn:1085 #, fuzzy, c-format msgid "Verify cert" msgstr "πολύ καλό" #: standalone/drakvpn:1087 #, c-format msgid "" "If you do not want to verify the peer's certificate for\n" "some reason, set this to off. The default is on." msgstr "" #: standalone/drakvpn:1089 #, c-format msgid "My identifier" msgstr "" #: standalone/drakvpn:1090 #, c-format msgid "" "specifies the identifier sent to the remote host and the\n" "type to use in the phase 1 negotiation. address, fqdn,\n" "user_fqdn, keyid and asn1dn can be used as an idtype.\n" "they are used like:\n" "\tmy_identifier address [address];\n" "\t\tthe type is the IP address. This is the default\n" "\t\ttype if you do not specify an identifier to use.\n" "\tmy_identifier user_fqdn string;\n" "\t\tthe type is a USER_FQDN (user fully-qualified\n" "\t\tdomain name).\n" "\tmy_identifier fqdn string;\n" "\t\tthe type is a FQDN (fully-qualified domain name).\n" "\tmy_identifier keyid file;\n" "\t\tthe type is a KEY_ID.\n" "\tmy_identifier asn1dn [string];\n" "\t\tthe type is an ASN.1 distinguished name. If\n" "\t\tstring is omitted, racoon(8) will get DN from\n" "\t\tSubject field in the certificate.\n" "\n" "Examples : \n" "\n" "my_identifier user_fqdn \"myemail@mydomain.com\"" msgstr "" #: standalone/drakvpn:1110 #, fuzzy, c-format msgid "Peers identifier" msgstr "Εκτυπωτής" #: standalone/drakvpn:1111 #, fuzzy, c-format msgid "Proposal" msgstr "Πρωτόκολλο" #: standalone/drakvpn:1113 #, c-format msgid "" "specify the encryption algorithm used for the\n" "phase 1 negotiation. This directive must be defined. \n" "algorithm is one of following: \n" "\n" "des, 3des, blowfish, cast128 for oakley.\n" "\n" "For other transforms, this statement should not be used." msgstr "" #: standalone/drakvpn:1120 #, c-format msgid "Hash algorithm" msgstr "" #: standalone/drakvpn:1121 #, fuzzy, c-format msgid "Authentication method" msgstr "Πιστοποίηση" #: standalone/drakvpn:1122 #, fuzzy, c-format msgid "DH group" msgstr "oμάδα" #: standalone/drakvpn:1129 #, fuzzy, c-format msgid "Command" msgstr "Γραμμή εντολών" #: standalone/drakvpn:1130 #, c-format msgid "Source IP range" msgstr "" #: standalone/drakvpn:1131 #, c-format msgid "Destination IP range" msgstr "" #: standalone/drakvpn:1132 #, fuzzy, c-format msgid "Upper-layer protocol" msgstr "Ευρωπαϊκό πρωτόκολλο" #: standalone/drakvpn:1133 #, c-format msgid "Flag" msgstr "" #: standalone/drakvpn:1134 #, fuzzy, c-format msgid "Direction" msgstr "Περιγραφή" #: standalone/drakvpn:1135 #, c-format msgid "IPsec policy" msgstr "" #: standalone/drakvpn:1137 #, fuzzy, c-format msgid "Mode" msgstr "Μοντέλο" #: standalone/drakvpn:1138 #, fuzzy, c-format msgid "Source/destination" msgstr "Σταθμός Εργασίας" #: standalone/drakvpn:1139 standalone/harddrake2:57 #, c-format msgid "Level" msgstr "Επίπεδο" #: standalone/drakxtv:46 #, c-format msgid "USA (broadcast)" msgstr "USA (εναέρια)" #: standalone/drakxtv:46 #, c-format msgid "USA (cable)" msgstr "USA (καλωδιακή)" #: standalone/drakxtv:46 #, c-format msgid "USA (cable-hrc)" msgstr "" #: standalone/drakxtv:46 #, c-format msgid "Canada (cable)" msgstr "Καναδικό (Καλωδιακή)" #: standalone/drakxtv:47 #, c-format msgid "Japan (broadcast)" msgstr "Ιαπωνία (εναέρια)" #: standalone/drakxtv:47 #, c-format msgid "Japan (cable)" msgstr "Ιαπωνία (Καλωδιακή)" #: standalone/drakxtv:47 #, c-format msgid "China (broadcast)" msgstr "Κίνα (εναέρια)" #: standalone/drakxtv:48 #, c-format msgid "West Europe" msgstr "Δυτική Ευρώπη" #: standalone/drakxtv:48 #, c-format msgid "East Europe" msgstr "Ανατολική Ευρώπη" #: standalone/drakxtv:48 #, c-format msgid "France [SECAM]" msgstr "Γαλλία [SECAM]" #: standalone/drakxtv:49 #, c-format msgid "Newzealand" msgstr "Νέα Ζηλανδία" #: standalone/drakxtv:52 #, c-format msgid "Australian Optus cable TV" msgstr "Καλωδιακή τηλεόραση Optus της Αυστραλίας" #: standalone/drakxtv:84 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: standalone/drakxtv:86 #, c-format msgid "TV norm:" msgstr "" #: standalone/drakxtv:87 #, c-format msgid "Area:" msgstr "Περιοχή:" #: standalone/drakxtv:91 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "Γίνεται αναζήτηση σταθμών τηλεόρασης ..." #: standalone/drakxtv:101 #, c-format msgid "Scanning for TV channels" msgstr "Αναζήτηση σταθμών τηλεόρασης" #: standalone/drakxtv:105 #, c-format msgid "There was an error while scanning for TV channels" msgstr "Προκλήθηκε σφάλμα κατά την αναζήτηση σταθμών τηλεόρασης" #: standalone/drakxtv:106 #, c-format msgid "XawTV isn't installed!" msgstr "Το XawTV εγκαταστάθηκε!" #: standalone/drakxtv:109 #, c-format msgid "Have a nice day!" msgstr "Καλή σας μέρα!" #: standalone/drakxtv:110 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "Τώρα μπορείτε να εκτελέσετε το xawtv (μέσα από τα Χ Window!) !\n" #: standalone/drakxtv:131 #, c-format msgid "No TV Card detected!" msgstr "Δεν βρέθηκε κάρτα τηλεόρασης!" #: standalone/drakxtv:132 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" "Δεν βρέθηκε κάρτα τηλεόρασης στο μηχάνημά σας.Παρακαλώ βεβαιωθείτε ότι μια " "υποστηριζόμενη κάρτα στο Linux είναι συνδεμένη.\n" "\n" "\n" "Μπορείτε να επισκεφτείτε την βάση δεδομένων στο: \n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" #: standalone/harddrake2:18 #, c-format msgid "Alternative drivers" msgstr "Εναλλακτικοί οδηγοί" #: standalone/harddrake2:19 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "η λίστα με εναλλακτικούς οδηγούς για την κάρτα ήχου σας" #: standalone/harddrake2:22 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" "αυτή είναι η φυσική θέση στην οποία είναι συνδεμένη η συσκευή (π.χ.PCI, " "USB, ...)" #: standalone/harddrake2:23 #, c-format msgid "Channel" msgstr "Κανάλι" #: standalone/harddrake2:23 #, c-format msgid "EIDE/SCSI channel" msgstr "Κανάλι EIDE/SCSI" #: standalone/harddrake2:24 #, c-format msgid "Bogomips" msgstr "Bogomips" #: standalone/harddrake2:24 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: standalone/harddrake2:26 #, c-format msgid "Bus identification" msgstr "Αναγνωριστικό θύρας" #: standalone/harddrake2:27 #, fuzzy, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "PCI συσκευή PCI" #: standalone/harddrake2:30 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" "- συσκευές pci: δίνει τη θύρα PCI, τη συσκευή και λειτουργία αυτής της " "κάρτας\n" "- συσκευές eide: η συσκευή είναι συσκευή slave ή master\n" "- συσκευές scsi: ο δίαυλος scsi και τα χαρακτηριστικά της συσκευής scsi" #: standalone/harddrake2:33 #, c-format msgid "Cache size" msgstr "μέγεθος Cache" #: standalone/harddrake2:33 #, fuzzy, c-format msgid "size of the (second level) cpu cache" msgstr "Μέγεθος της (δευτέρου επιπέδου) cpu cache" #: standalone/harddrake2:34 #, c-format msgid "Drive capacity" msgstr "" #: standalone/harddrake2:34 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: standalone/harddrake2:36 #, c-format msgid "Coma bug" msgstr "Σφάλμα Coma" #: standalone/harddrake2:36 #, fuzzy, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "Αν αυτή η συσκευή έχει το σφάλμα Cyrix 6x86 Coma" #: standalone/harddrake2:37 #, c-format msgid "Cpuid family" msgstr "Οικογένεια Cpuid" #: standalone/harddrake2:37 #, fuzzy, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "Οικογένεια του επεξεργαστή (π.χ. 6 για κλάση i686)" #: standalone/harddrake2:38 #, c-format msgid "Cpuid level" msgstr "Επίπεδο Cpuid" #: standalone/harddrake2:38 #, fuzzy, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "Επίπεδο πληροφοριών που μπορούν να βρεθούν μέσω των εντολών cpuid" #: standalone/harddrake2:39 #, c-format msgid "Frequency (MHz)" msgstr "Συχνότητα (MHz)" #: standalone/harddrake2:39 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: standalone/harddrake2:40 #, fuzzy, c-format msgid "this field describes the device" msgstr "Αυτό πεδίο περιγραφή τη συσκευή" #: standalone/harddrake2:41 #, c-format msgid "Old device file" msgstr "Παλαιό αρχείο συσκευής" #: standalone/harddrake2:42 #, c-format msgid "old static device name used in dev package" msgstr "παλαιά στατική όνομα συσκευής του πακέτου dev" #: standalone/harddrake2:43 #, c-format msgid "New devfs device" msgstr "Νέα συσκευή devfs" #: standalone/harddrake2:44 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "δημιουργήθηκε νέα δυναμική συσκευή από τον κεντρικό πυρήνα devfs" #: standalone/harddrake2:46 #, c-format msgid "Module" msgstr "Άρθρωμα" #: standalone/harddrake2:46 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "το άρθρωμα του πυρήνα GNU/Linux που χειρίζεται την συσκευή" #: standalone/harddrake2:47 #, c-format msgid "Flags" msgstr "" #: standalone/harddrake2:47 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: standalone/harddrake2:48 #, c-format msgid "Fdiv bug" msgstr "Σφάλμα Fdiv" #: standalone/harddrake2:49 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: standalone/harddrake2:50 #, c-format msgid "Is FPU present" msgstr "Το FPU είναι παρόν" #: standalone/harddrake2:50 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: standalone/harddrake2:51 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: standalone/harddrake2:51 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: standalone/harddrake2:52 #, c-format msgid "F00f bug" msgstr "Σφάλμα F00f" #: standalone/harddrake2:52 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: standalone/harddrake2:53 #, c-format msgid "Halt bug" msgstr "" #: standalone/harddrake2:54 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: standalone/harddrake2:56 #, c-format msgid "Floppy format" msgstr "Φορμά Δισκέτας" #: standalone/harddrake2:56 #, fuzzy, c-format msgid "format of floppies supported by the drive" msgstr "Φορμά για δισκέτες που μπορεί να δεχτεί ο οδηγός" #: standalone/harddrake2:57 #, fuzzy, c-format msgid "sub generation of the cpu" msgstr "Sub" #: standalone/harddrake2:58 #, c-format msgid "class of hardware device" msgstr "κλάση της συσκευής " #: standalone/harddrake2:59 standalone/harddrake2:60 #: standalone/printerdrake:212 #, c-format msgid "Model" msgstr "Μοντέλο" #: standalone/harddrake2:59 #, c-format msgid "hard disk model" msgstr "μοντέλο σκληρού δίσκου" #: standalone/harddrake2:60 #, fuzzy, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "Γενιά του επεξεργαστή (π.χ. 8 για PentiumIII, ...)" #: standalone/harddrake2:61 #, c-format msgid "Model name" msgstr "Όνομα μοντέλου" #: standalone/harddrake2:61 #, fuzzy, c-format msgid "official vendor name of the cpu" msgstr "Το επίσημο όνομα κατασκευαστή του επεξεργαστή" #: standalone/harddrake2:62 #, c-format msgid "Number of buttons" msgstr "Αριθμός πλήκτρων" #: standalone/harddrake2:62 #, c-format msgid "the number of buttons the mouse has" msgstr "Ο αριθμός των πλήκτρων του ποντικιού" #: standalone/harddrake2:63 #, c-format msgid "Name" msgstr "Όνομα" #: standalone/harddrake2:63 #, c-format msgid "the name of the CPU" msgstr "το όνομα κατασκευαστή του επεξεργαστή" #: standalone/harddrake2:64 #, c-format msgid "network printer port" msgstr "θύρα εκτυπωτή δικτύου" #: standalone/harddrake2:65 #, c-format msgid "Processor ID" msgstr "Ταυτότητα επεξεργαστή" #: standalone/harddrake2:65 #, c-format msgid "the number of the processor" msgstr "Ο αριθμός του επεξεργαστή" #: standalone/harddrake2:66 #, c-format msgid "Model stepping" msgstr "Μοντέλο βηματισμού" #: standalone/harddrake2:66 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: standalone/harddrake2:67 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "Ο τύπος της θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας." #: standalone/harddrake2:68 #, c-format msgid "the vendor name of the device" msgstr "το όνομα κατασκευαστή της συσκευής" #: standalone/harddrake2:69 #, c-format msgid "the vendor name of the processor" msgstr "το όνομα κατασκευαστή του επεξεργαστή" #: standalone/harddrake2:70 #, fuzzy, c-format msgid "Write protection" msgstr "Αυτόματη ανίχνευση εκτυπωτών" #: standalone/harddrake2:70 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: standalone/harddrake2:84 standalone/logdrake:77 standalone/printerdrake:146 #: standalone/printerdrake:159 #, c-format msgid "/_Options" msgstr "/_Επιλογές" #: standalone/harddrake2:85 standalone/harddrake2:106 standalone/logdrake:79 #: standalone/printerdrake:171 standalone/printerdrake:172 #: standalone/printerdrake:173 standalone/printerdrake:174 #, c-format msgid "/_Help" msgstr "/_Βοήθεια" #: standalone/harddrake2:89 #, c-format msgid "/Autodetect _printers" msgstr "/Εντοπισμός _εκτυπωτών" #: standalone/harddrake2:90 #, c-format msgid "/Autodetect _modems" msgstr "/Εντοπισμός _μόντεμ" #: standalone/harddrake2:91 #, c-format msgid "/Autodetect _jaz drives" msgstr "/Εντοπισμός _οδηγών jaz" #: standalone/harddrake2:98 standalone/printerdrake:152 #, c-format msgid "/_Quit" msgstr "/_Έξοδος" #: standalone/harddrake2:107 #, c-format msgid "/_Fields description" msgstr "/_Περιγραφή Πεδίων" #: standalone/harddrake2:109 #, c-format msgid "Harddrake help" msgstr "Βοήθεια Harddrake" #: standalone/harddrake2:110 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" "Περιγραφή των πεδίων:\n" "\n" #: standalone/harddrake2:115 #, c-format msgid "Select a device !" msgstr "Επιλέξτε μια συσκευή !" #: standalone/harddrake2:115 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" "Μόλις επιλέξετε μια συσκευή, θα μπορείτε να δείτε τις πληροφορίες σε πεδία " "που εμφανίζονται στο δεξί τμήμα με όνομα(\"Πληροφορίες\")" #: standalone/harddrake2:120 standalone/printerdrake:173 #, c-format msgid "/_Report Bug" msgstr "/_Αναφορά Bug" #: standalone/harddrake2:121 standalone/printerdrake:174 #, c-format msgid "/_About..." msgstr "/_Σχετικά με..." #: standalone/harddrake2:122 #, c-format msgid "About Harddrake" msgstr "Σχετικά με το Harddrake" #: standalone/harddrake2:124 #, fuzzy, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" "Αυτό είναι το HardDrake, ένα εργαλείο ρύθμισης της Mandrake\n" "Έκδοση:" #: standalone/harddrake2:133 #, c-format msgid "Detection in progress" msgstr "Ανίχνευση σε εξέλιξη" #: standalone/harddrake2:140 #, c-format msgid "Harddrake2 version %s" msgstr "Έκδοση Harddrake2 %s" #: standalone/harddrake2:156 #, c-format msgid "Detected hardware" msgstr "Υλικό που ανιχνεύθηκε" #: standalone/harddrake2:161 #, c-format msgid "Configure module" msgstr "Ρύθμιση αρθρώματος" #: standalone/harddrake2:168 #, c-format msgid "Run config tool" msgstr "Εκτέλεση εργαλείο ρύθμισης" #: standalone/harddrake2:215 #, c-format msgid "unknown" msgstr "Άγνωστο" #: standalone/harddrake2:216 #, c-format msgid "Unknown" msgstr "Άγνωστο" #: standalone/harddrake2:234 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" "Κάντε κλικ σε μια συσκευή στο αριστερό τμήμα για να δείτε εδώ τις " "πληροφορίες." #: standalone/harddrake2:282 #, c-format msgid "secondary" msgstr "δευτερεύουσα" #: standalone/harddrake2:282 #, c-format msgid "primary" msgstr "πρωτεύουσα" #: standalone/harddrake2:290 #, fuzzy, c-format msgid "burner" msgstr "Εκτυπωτής" #: standalone/harddrake2:290 #, fuzzy, c-format msgid "DVD" msgstr "DVD-ROM" #: standalone/keyboarddrake:24 #, c-format msgid "Please, choose your keyboard layout." msgstr "Παρακαλώ επιλέξτε την διάταξη του πληκτρολογίου." #: standalone/keyboarddrake:33 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Θέλετε το BackSpace να επιστρέφει Delete στην κονσόλα;" #: standalone/localedrake:60 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "Η αλλαγή έγινε, αλλά για να ισχύσει θα πρέπει να γίνει αποσύνδεση" #: standalone/logdrake:50 #, c-format msgid "Mandrake Tools Explanation" msgstr "Επεξήγηση Εργαλείων της Mandrake" #: standalone/logdrake:51 #, fuzzy, c-format msgid "Logdrake" msgstr "logdrake" #: standalone/logdrake:64 #, c-format msgid "Show only for the selected day" msgstr "Εμφάνιση μόνο για την επιλεγμένη ημέρα" #: standalone/logdrake:71 #, c-format msgid "/File/_New" msgstr "/Αρχείο/_Νέο" #: standalone/logdrake:71 #, c-format msgid "N" msgstr "N" #: standalone/logdrake:72 #, c-format msgid "/File/_Open" msgstr "/Αρχείο/Ά_νοιγμα" #: standalone/logdrake:72 #, c-format msgid "O" msgstr "O" #: standalone/logdrake:73 #, c-format msgid "/File/_Save" msgstr "Αρχείο/Απο_θήκευση" #: standalone/logdrake:73 #, c-format msgid "S" msgstr "S" #: standalone/logdrake:74 #, c-format msgid "/File/Save _As" msgstr "/Αρχείο/Αποθήκευση _Ως" #: standalone/logdrake:75 #, c-format msgid "/File/-" msgstr "/Αρχείο/-" #: standalone/logdrake:78 #, c-format msgid "/Options/Test" msgstr "/Επιλογές/Τεστ" #: standalone/logdrake:80 #, c-format msgid "/Help/_About..." msgstr "/Βοήθεια/_Σχετικά με..." #: standalone/logdrake:111 #, c-format msgid "" "_:this is the auth.log log file\n" "Authentication" msgstr "" #: standalone/logdrake:112 #, c-format msgid "" "_:this is the user.log log file\n" "User" msgstr "" #: standalone/logdrake:113 #, c-format msgid "" "_:this is the /var/log/messages log file\n" "Messages" msgstr "" #: standalone/logdrake:114 #, c-format msgid "" "_:this is the /var/log/syslog log file\n" "Syslog" msgstr "" #: standalone/logdrake:118 #, c-format msgid "search" msgstr "αναζήτηση" #: standalone/logdrake:130 #, c-format msgid "A tool to monitor your logs" msgstr "Ένα εργαλείο για να βλέπετε τα log σας" #: standalone/logdrake:131 standalone/net_monitor:85 #, c-format msgid "Settings" msgstr "Ρυθμίσεις" #: standalone/logdrake:136 #, fuzzy, c-format msgid "Matching" msgstr "ταιριάζει" #: standalone/logdrake:137 #, c-format msgid "but not matching" msgstr "αλλά δεν ταιριάζει" #: standalone/logdrake:141 #, c-format msgid "Choose file" msgstr "Επιλέξτε ένα αρχείο" #: standalone/logdrake:150 #, c-format msgid "Calendar" msgstr "Ημερολόγιο" #: standalone/logdrake:160 #, c-format msgid "Content of the file" msgstr "Περιεχόμενο του αρχείου" #: standalone/logdrake:164 standalone/logdrake:377 #, c-format msgid "Mail alert" msgstr "Ειδοποίηση Ταχυδρομείου" #: standalone/logdrake:171 #, c-format msgid "The alert wizard had unexpectly failled:" msgstr "" #: standalone/logdrake:219 #, c-format msgid "please wait, parsing file: %s" msgstr "παρακαλώ περιμένετε, επεξεργασία αρχείου: %s" #: standalone/logdrake:355 #, c-format msgid "Apache World Wide Web Server" msgstr "Εξυπηρετητής Apache World Wide Web" #: standalone/logdrake:356 #, c-format msgid "Domain Name Resolver" msgstr "" #: standalone/logdrake:357 #, c-format msgid "Ftp Server" msgstr "Διακομιστής Ftp" #: standalone/logdrake:358 #, c-format msgid "Postfix Mail Server" msgstr "Εξυπηρετητής Ταχυδρομείου Postfix" #: standalone/logdrake:359 #, c-format msgid "Samba Server" msgstr "Εξυπηρετητής Samba" #: standalone/logdrake:360 #, c-format msgid "SSH Server" msgstr "Εξυπηρετητής SSH" #: standalone/logdrake:361 #, c-format msgid "Webmin Service" msgstr "Υπηρεσία Webmin" #: standalone/logdrake:362 #, c-format msgid "Xinetd Service" msgstr "Υπηρεσία Xinetd" #: standalone/logdrake:372 #, fuzzy, c-format msgid "Configure the mail alert system" msgstr "Αλλαγή συστήματος εκτύπωσης" #: standalone/logdrake:373 #, c-format msgid "Stop the mail alert system" msgstr "" #: standalone/logdrake:380 #, c-format msgid "Mail alert configuration" msgstr "Ρύθμιση ειδοποίησης Ταχυδρομείου" #: standalone/logdrake:381 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" "Καλώς ορίσατε στο εργαλείο ρύθμισης ταχυδρομείου.\n" "\n" "Εδώ, θα μπορέσετε να ρυθμίσετε το σύστημα ειδοποίησης\n" #: standalone/logdrake:384 #, fuzzy, c-format msgid "What do you want to do?" msgstr "Πού θέλετε να συνδέσετε το %s;" #: standalone/logdrake:391 #, fuzzy, c-format msgid "Services settings" msgstr "Ρυθμίσεις υπηρεσίας" #: standalone/logdrake:392 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" "Θα λάβετε μια ειδοποίηση εάν μια από τις επιλεγμένες υπηρεσίες πάψει να " "εκτελείται" #: standalone/logdrake:399 #, fuzzy, c-format msgid "Load setting" msgstr "Φόρτωση ρυθμίσεων" #: standalone/logdrake:400 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" "Θα λάβετε μια ειδοποίηση εάν το φορτίο είναι μεγαλύτερο από αυτή την τιμή" #: standalone/logdrake:401 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: standalone/logdrake:406 #, fuzzy, c-format msgid "Alert configuration" msgstr "Ρύθμιση ειδοποιήσεων" #: standalone/logdrake:407 #, c-format msgid "Please enter your email address below " msgstr "Παρακαλώ εισάγετε την ηλεκτρονική σας διεύθυνση" #: standalone/logdrake:408 #, c-format msgid "and enter the name (or the IP) of the SMTP server you whish to use" msgstr "" #: standalone/logdrake:427 standalone/logdrake:433 #, fuzzy, c-format msgid "Congratulations" msgstr "Συγχαρητήρια!" #: standalone/logdrake:427 #, c-format msgid "The wizard successfully configured the mail alert." msgstr "" #: standalone/logdrake:433 #, c-format msgid "The wizard successfully disabled the mail alert." msgstr "" #: standalone/logdrake:492 #, c-format msgid "Save as.." msgstr "Αποθήκευση Ως.." #: standalone/mousedrake:31 #, c-format msgid "Please choose your mouse type." msgstr "Παρακαλώ επιλέξτε τύπο ποντικιού." #: standalone/mousedrake:44 #, c-format msgid "Emulate third button?" msgstr "Εξομοίωση τρίτου πλήκτρου;" #: standalone/mousedrake:61 #, fuzzy, c-format msgid "Mouse test" msgstr "Mouse Systems" #: standalone/mousedrake:64 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "Παρακαλώ δοκιμάστε το ποντίκι" #: standalone/net_monitor:51 standalone/net_monitor:56 #, c-format msgid "Network Monitoring" msgstr "Παρακολούθηση Δικτύου" #: standalone/net_monitor:91 #, fuzzy, c-format msgid "Global statistics" msgstr "Στατιστικά" #: standalone/net_monitor:94 #, c-format msgid "Instantaneous" msgstr "" #: standalone/net_monitor:94 #, fuzzy, c-format msgid "Average" msgstr "μέσος όρος" #: standalone/net_monitor:95 #, fuzzy, c-format msgid "" "Sending\n" "speed:" msgstr "Ταχύτητα Αποστολής:" #: standalone/net_monitor:96 #, fuzzy, c-format msgid "" "Receiving\n" "speed:" msgstr "Ταχύτητα Λήψης:" #: standalone/net_monitor:99 #, fuzzy, c-format msgid "" "Connection\n" "time: " msgstr "Ώρα Σύνδεσης: " #: standalone/net_monitor:121 #, c-format msgid "Wait please, testing your connection..." msgstr "Παρακαλώ περιμένετε, δοκιμάζεται η σύνδεση..." #: standalone/net_monitor:149 standalone/net_monitor:162 #, fuzzy, c-format msgid "Disconnecting from Internet " msgstr "Αποσύνδεση από το Διαδίκτυο" #: standalone/net_monitor:149 standalone/net_monitor:162 #, fuzzy, c-format msgid "Connecting to Internet " msgstr "Σύνδεση στο Διαδίκτυο" #: standalone/net_monitor:193 #, fuzzy, c-format msgid "Disconnection from Internet failed." msgstr "Η αποσύνδεση από το διαδίκτυο απέτυχε." #: standalone/net_monitor:194 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "Η αποσύνδεση από το Διαδίκτυο ολοκληρώθηκε." #: standalone/net_monitor:196 #, c-format msgid "Connection complete." msgstr "Η σύνδεση έγινε." #: standalone/net_monitor:197 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" "Η σύνδεση απέτυχε.\n" "Επαληθεύστε τις ρυθμίσεις σας στο Κέντρο Ελέγχου Mandrake." #: standalone/net_monitor:295 #, c-format msgid "Color configuration" msgstr "Ρύθμιση χρωμάτων" #: standalone/net_monitor:343 standalone/net_monitor:363 #, c-format msgid "sent: " msgstr "αποστολή: " #: standalone/net_monitor:350 standalone/net_monitor:367 #, c-format msgid "received: " msgstr "ληφθέντα:" #: standalone/net_monitor:357 #, c-format msgid "average" msgstr "μέσος όρος" #: standalone/net_monitor:360 #, c-format msgid "Local measure" msgstr "Τοπική μέτρηση" #: standalone/net_monitor:392 #, c-format msgid "transmitted" msgstr "απεσταλμένα" #: standalone/net_monitor:393 #, c-format msgid "received" msgstr "ληφθέντα" #: standalone/net_monitor:411 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" "Προσοχή ανιχνεύθηκε μια άλλη σύνδεση στο διαδίκτυο, που ίσως χρησιμοποιεί το " "δίκτυό σας" #: standalone/net_monitor:417 #, c-format msgid "Disconnect %s" msgstr "Αποσύνδεση %s" #: standalone/net_monitor:417 #, c-format msgid "Connect %s" msgstr "Σύνδεση %s" #: standalone/net_monitor:422 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Ρύθμιση σύνδεσης Διαδικτύου" #: standalone/printerdrake:70 #, fuzzy, c-format msgid "Loading printer configuration... Please wait" msgstr "Αλλαγή ρυθμίσεων εκτυπωτή" #: standalone/printerdrake:86 #, c-format msgid "Reading data of installed printers..." msgstr "Ανάγνωση δεδομένων των εγκατεστημένων εκτυπωτών..." #: standalone/printerdrake:129 #, fuzzy, c-format msgid "%s Printer Management Tool" msgstr "Κοινή χρήση εκτυπωτών" #: standalone/printerdrake:143 standalone/printerdrake:144 #: standalone/printerdrake:145 standalone/printerdrake:153 #: standalone/printerdrake:154 standalone/printerdrake:158 #, fuzzy, c-format msgid "/_Actions" msgstr "Ενέργειες" #: standalone/printerdrake:143 #, fuzzy, c-format msgid "/Set as _Default" msgstr " (Προεπιλεγμένος)" #: standalone/printerdrake:144 #, fuzzy, c-format msgid "/_Edit" msgstr "Επεξεργασία" #: standalone/printerdrake:145 #, fuzzy, c-format msgid "/_Delete" msgstr "Διαγραφή" #: standalone/printerdrake:146 #, fuzzy, c-format msgid "/_Expert mode" msgstr "Για Προχωρημένους" #: standalone/printerdrake:151 #, c-format msgid "/_Refresh" msgstr "" #: standalone/printerdrake:154 #, fuzzy, c-format msgid "/_Add Printer" msgstr "Εκτυπωτής" #: standalone/printerdrake:158 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "Ρύθμιση Χ" #: standalone/printerdrake:191 #, c-format msgid "Search:" msgstr "Αναζήτηση:" #: standalone/printerdrake:194 #, c-format msgid "Apply filter" msgstr "" #: standalone/printerdrake:212 standalone/printerdrake:219 #, c-format msgid "Def." msgstr "" #: standalone/printerdrake:212 standalone/printerdrake:219 #, fuzzy, c-format msgid "Printer Name" msgstr "Όνομα Ουράς Εκτυπωτή" #: standalone/printerdrake:212 #, fuzzy, c-format msgid "Connection Type" msgstr "Τύπος Σύνδεσης :" #: standalone/printerdrake:219 #, fuzzy, c-format msgid "Server Name" msgstr "Όνομα Διακομιστή:" #: standalone/printerdrake:225 #, fuzzy, c-format msgid "Add Printer" msgstr "Εκτυπωτής" #: standalone/printerdrake:225 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Προσθήκη μιας ομάδας" #: standalone/printerdrake:227 #, fuzzy, c-format msgid "Set as default" msgstr "εξ' ορισμού" #: standalone/printerdrake:227 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "Ορισμός αυτού του εκτυπωτή ως προεπιλεγμένου" #: standalone/printerdrake:229 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Επεξεργασία επιλεγμένου εξυπηρετητή" #: standalone/printerdrake:231 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Διαγραφή επιλεγμένου κανόνα" #: standalone/printerdrake:233 #, c-format msgid "Refresh" msgstr "" #: standalone/printerdrake:233 #, fuzzy, c-format msgid "Refresh the list" msgstr "Λίστα χρηστών" #: standalone/printerdrake:235 #, fuzzy, c-format msgid "Configure CUPS" msgstr "Ρύθμιση Χ" #: standalone/printerdrake:235 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Αλλαγή συστήματος εκτύπωσης" #: standalone/printerdrake:521 #, c-format msgid "Authors: " msgstr "" #: standalone/printerdrake:527 #, fuzzy, c-format msgid "Printer Management \n" msgstr "Κοινή χρήση εκτυπωτών" #: standalone/scannerdrake:53 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: standalone/scannerdrake:54 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: standalone/scannerdrake:60 standalone/scannerdrake:452 #, c-format msgid "Searching for configured scanners ..." msgstr "Γίνεται αναζήτηση για ρυθμισμένους σαρωτές ..." #: standalone/scannerdrake:64 standalone/scannerdrake:456 #, c-format msgid "Searching for new scanners ..." msgstr "Γίνεται αναζήτηση για νέους σαρωτές ..." #: standalone/scannerdrake:72 standalone/scannerdrake:478 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "Επαναδημιουργία λίστας με τους ρυθμισμένους σαρωτές ..." #: standalone/scannerdrake:94 standalone/scannerdrake:135 #: standalone/scannerdrake:149 #, fuzzy, c-format msgid "The %s is not supported by this version of %s." msgstr "Το %s δεν υποστηρίζεται από αυτή την έκδοση του Mandrake Linux." #: standalone/scannerdrake:97 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "Το %s βρέθηκε στο %s,να ρυθμιστεί αυτόματα;" #: standalone/scannerdrake:109 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" "το %s δεν είναι στη βάση δεδομένων των σαρωτών, να ρυθμιστεί χειροκίνητα;" #: standalone/scannerdrake:124 #, c-format msgid "Select a scanner model" msgstr "Επιλέξτε ένα μοντέλο σαρωτή" #: standalone/scannerdrake:125 #, c-format msgid " (" msgstr " (" #: standalone/scannerdrake:126 #, c-format msgid "Detected model: %s" msgstr "Βρέθηκε το μοντέλο: %s" #: standalone/scannerdrake:128 #, c-format msgid ", " msgstr ", " #: standalone/scannerdrake:129 #, c-format msgid "Port: %s" msgstr "Θύρα: %s" #: standalone/scannerdrake:155 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "Το %s δεν είναι γνωστό από αυτή την έκδοση του Scannerdrake." #: standalone/scannerdrake:163 standalone/scannerdrake:177 #, c-format msgid "Do not install firmware file" msgstr "" #: standalone/scannerdrake:167 standalone/scannerdrake:219 #, c-format msgid "" "It is possible that your %s needs its firmware to be uploaded everytime when " "it is turned on." msgstr "" #: standalone/scannerdrake:168 standalone/scannerdrake:220 #, c-format msgid "If this is the case, you can make this be done automatically." msgstr "" #: standalone/scannerdrake:169 standalone/scannerdrake:223 #, c-format msgid "" "To do so, you need to supply the firmware file for your scanner so that it " "can be installed." msgstr "" #: standalone/scannerdrake:170 standalone/scannerdrake:224 #, c-format msgid "" "You find the file on the CD or floppy coming with the scanner, on the " "manufacturer's home page, or on your Windows partition." msgstr "" #: standalone/scannerdrake:172 standalone/scannerdrake:231 #, c-format msgid "Install firmware file from" msgstr "" #: standalone/scannerdrake:192 #, fuzzy, c-format msgid "Select firmware file" msgstr "Επιλέξτε αρχείο" #: standalone/scannerdrake:195 standalone/scannerdrake:254 #, c-format msgid "The firmware file %s does not exist or is unreadable!" msgstr "" #: standalone/scannerdrake:218 #, c-format msgid "" "It is possible that your scanners need their firmware to be uploaded " "everytime when they are turned on." msgstr "" #: standalone/scannerdrake:222 #, c-format msgid "" "To do so, you need to supply the firmware files for your scanners so that it " "can be installed." msgstr "" #: standalone/scannerdrake:225 #, c-format msgid "" "If you have already installed your scanner's firmware you can update the " "firmware here by supplying the new firmware file." msgstr "" #: standalone/scannerdrake:227 #, c-format msgid "Install firmware for the" msgstr "" #: standalone/scannerdrake:250 #, fuzzy, c-format msgid "Select firmware file for the %s" msgstr "Επιλέξτε αρχείο" #: standalone/scannerdrake:276 #, c-format msgid "The firmware file for your %s was successfully installed." msgstr "" #: standalone/scannerdrake:286 #, c-format msgid "The %s is unsupported" msgstr "Το %s δεν υποστηρίζεται" #: standalone/scannerdrake:291 #, fuzzy, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the %s Control Center in Hardware section." msgstr "" "Το %s πρέπει να ρυθμιστεί από το printerdrake.\n" "Μπορείτε να εκκινήσετε το printerdrake από το Κέντρο Ελέγχου Mandrake από το " "τμήμα Υλικό." #: standalone/scannerdrake:295 standalone/scannerdrake:302 #: standalone/scannerdrake:332 #, c-format msgid "Auto-detect available ports" msgstr "Διαθέσιμες θύρες αυτόματου εντοπισμού" #: standalone/scannerdrake:297 standalone/scannerdrake:343 #, c-format msgid "Please select the device where your %s is attached" msgstr "Παρακαλώ επιλέξτε την συσκευή στην οποία είναι συνδεμένο το %s" #: standalone/scannerdrake:298 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" "(Σημείωση: Στις παράλληλες θύρες δεν μπορεί να γίνει αυτόματος εντοπισμός)" #: standalone/scannerdrake:300 standalone/scannerdrake:345 #, c-format msgid "choose device" msgstr "Επιλέξτε συσκευή" #: standalone/scannerdrake:334 #, c-format msgid "Searching for scanners ..." msgstr "Γίνεται αναζήτηση για σαρωτές ..." #: standalone/scannerdrake:368 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" "Το %s σας έχει ρυθμιστεί. \n" "Μπορείτε τώρα να σαρώσετε έγγραφα με το \"XSane\" από το Πολυμέσα/Γραφικά " "από μενού εφαρμογών." #: standalone/scannerdrake:392 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "" "Οι παρακάτω σαρωτές\n" "\n" "%s\n" "είναι διαθέσιμοι στο σύστημά σας\n" #: standalone/scannerdrake:393 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "" "Ο παρακάτω σαρωτής\n" "\n" "%s\n" "είναι διαθέσιμος στο σύστημά σας\n" #: standalone/scannerdrake:396 standalone/scannerdrake:399 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "Δεν βρέθηκαν σαρωτές που να είναι διαθέσιμοι στο σύστημά σας.\n" #: standalone/scannerdrake:413 #, c-format msgid "Search for new scanners" msgstr "Αναζήτηση για νέους σαρωτές" #: standalone/scannerdrake:419 #, c-format msgid "Add a scanner manually" msgstr "Προσθήκη σαρωτή χειροκίνητα" #: standalone/scannerdrake:426 #, fuzzy, c-format msgid "Install/Update firmware files" msgstr "Επιλέξτε αρχείο" #: standalone/scannerdrake:432 #, c-format msgid "Scanner sharing" msgstr "Κοινή χρήση σαρωτών" #: standalone/scannerdrake:491 standalone/scannerdrake:656 #, c-format msgid "All remote machines" msgstr "Όλα τα απομακρυσμένα μηχανήματα" #: standalone/scannerdrake:503 standalone/scannerdrake:806 #, c-format msgid "This machine" msgstr "Αυτό το μηχάνημα" #: standalone/scannerdrake:543 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" "Εδώ μπορείτε να επιλέξετε αν οι συνδεμένοι σαρωτές αυτού το μηχανήματος θα " "είναι προσβάσιμοι από απομακρυσμένα μηχανήματα και από ποια." #: standalone/scannerdrake:544 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" "Επίσης εδώ μπορείτε να ορίσετε αν σαρωτές που βρίσκονται σε απομακρυσμένα " "μηχανήματα θα είναι διαθέσιμα σε αυτό το μηχάνημα." #: standalone/scannerdrake:547 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" "Οι σαρωτές αυτού του μηχανήματος είναι διαθέσιμοι σε άλλους υπολογιστές" #: standalone/scannerdrake:549 #, c-format msgid "Scanner sharing to hosts: " msgstr "Κοινόχρηστοι σαρωτές στους υπολογιστές: " #: standalone/scannerdrake:563 #, c-format msgid "Use scanners on remote computers" msgstr "Χρήση σαρωτών σε απομακρυσμένους υπολογιστές" #: standalone/scannerdrake:566 #, c-format msgid "Use the scanners on hosts: " msgstr "Χρήση των σαρωτών στους υπολογιστές:" #: standalone/scannerdrake:593 standalone/scannerdrake:665 #: standalone/scannerdrake:815 #, c-format msgid "Sharing of local scanners" msgstr "Κοινή χρήση τοπικών σαρωτών" #: standalone/scannerdrake:594 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" "Αυτά είναι τα μηχανήματα όπου οι τοπικά συνδεμένοι σαρωτές(ης) πρέπει να " "είναι διαθέσιμοι:" #: standalone/scannerdrake:605 standalone/scannerdrake:755 #, c-format msgid "Add host" msgstr "Προσθήκη υπολογιστή" #: standalone/scannerdrake:611 standalone/scannerdrake:761 #, c-format msgid "Edit selected host" msgstr "Επεξεργασία επιλεγμένου υπολογιστή" #: standalone/scannerdrake:620 standalone/scannerdrake:770 #, c-format msgid "Remove selected host" msgstr "Αφαίρεση επιλεγμένου υπολογιστή" #: standalone/scannerdrake:644 standalone/scannerdrake:652 #: standalone/scannerdrake:657 standalone/scannerdrake:703 #: standalone/scannerdrake:794 standalone/scannerdrake:802 #: standalone/scannerdrake:807 standalone/scannerdrake:853 #, c-format msgid "Name/IP address of host:" msgstr "Όνομα/IP διεύθυνση του υπολογιστή:" #: standalone/scannerdrake:666 standalone/scannerdrake:816 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" "Επιλέξτε τον υπολογιστή του οποίου οι τοπικοί σαρωτές θα γίνουν διαθέσιμοι:" #: standalone/scannerdrake:677 standalone/scannerdrake:827 #, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Πρέπει να ορίστε τον δικτυακό όνομα ή την IP διεύθυνση.\n" #: standalone/scannerdrake:688 standalone/scannerdrake:838 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" "Ο υπολογιστής είναί ήδη στη λίστα, δεν μπορείτε να τον προσθέσετε ξανά.\n" #: standalone/scannerdrake:743 #, c-format msgid "Usage of remote scanners" msgstr "Χρήση των απομακρυσμένων σαρωτών" #: standalone/scannerdrake:744 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" "Αυτά είναι τα μηχανήματα από όπου οι σαρωτές θα πρέπει να χρησιμοποιηθούν:" #: standalone/scannerdrake:904 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: standalone/service_harddrake:49 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "Ορισμένες συσκευές στο τμήμα υλικού \"%s\" αφαιρέθηκαν:\n" #: standalone/service_harddrake:53 #, fuzzy, c-format msgid "Some devices were added: %s\n" msgstr "Ορισμένες συσκευές προστέθηκαν:\n" #: standalone/service_harddrake:94 #, c-format msgid "Hardware probing in progress" msgstr "Ανίχνευση υλικού σε εξέλιξη" #: steps.pm:14 #, c-format msgid "Language" msgstr "Επιλέξτε γλώσσα" #: steps.pm:15 #, c-format msgid "License" msgstr "Άδεια Χρήσης" #: steps.pm:16 #, c-format msgid "Configure mouse" msgstr "Ρύθμιση ποντικιού" #: steps.pm:17 #, c-format msgid "Hard drive detection" msgstr "Εντοπισμός δίσκου" #: steps.pm:18 #, c-format msgid "Select installation class" msgstr "Επιλέξτε εγκατάσταση" #: steps.pm:19 #, c-format msgid "Choose your keyboard" msgstr "Επιλέξτε πληκτρολόγιο" #: steps.pm:21 #, c-format msgid "Partitioning" msgstr "Καταμερισμός" #: steps.pm:22 #, c-format msgid "Format partitions" msgstr "Μορφοπ. κατατμήσ." #: steps.pm:23 #, c-format msgid "Choose packages to install" msgstr "Επιλογή πακέτων" #: steps.pm:24 #, c-format msgid "Install system" msgstr "Εγκατάσταση συστήματος" #: steps.pm:25 #, c-format msgid "Root password" msgstr "Κωδικός Root" #: steps.pm:26 #, c-format msgid "Add a user" msgstr "Προσθήκη χρήστη" #: steps.pm:27 #, c-format msgid "Configure networking" msgstr "Ρύθμιση δικτύου" #: steps.pm:28 #, c-format msgid "Install bootloader" msgstr "Πρόγραμμα εκκίνησης" #: steps.pm:29 #, c-format msgid "Configure X" msgstr "Ρύθμιση Χ" #: steps.pm:31 #, c-format msgid "Configure services" msgstr "Ρύθμιση υπηρεσιών" #: steps.pm:32 #, c-format msgid "Install updates" msgstr "Αναβαθμίσεις" #: steps.pm:33 #, c-format msgid "Exit install" msgstr "Έξοδος" #: ugtk2.pm:1047 #, c-format msgid "Is this correct?" msgstr "Σωστό;" #: ugtk2.pm:1175 #, c-format msgid "Expand Tree" msgstr "Ανάπτυξη δέντρου" #: ugtk2.pm:1176 #, c-format msgid "Collapse Tree" msgstr "Σύμπτυξη δέντρου" #: ugtk2.pm:1177 #, c-format msgid "Toggle between flat and group sorted" msgstr "Εναλλαγή μεταξύ επίπεδης και ομαδικής ταξινόμησης" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" #: wizards.pm:99 #, fuzzy, c-format msgid "Installation failed" msgstr "Η εγκατάσταση θέματος απέτυχε!" #~ msgid "Configuration of a remote printer" #~ msgstr "Ρύθμιση απομακρυσμένου εκτυπωτή" #, fuzzy #~ msgid "configure %s" #~ msgstr "επαναρύθμιση" #, fuzzy #~ msgid "protocol = " #~ msgstr "Πρωτόκολλο" #, fuzzy #~ msgid "level = " #~ msgstr "επίπεδο" #~ msgid "Office Workstation" #~ msgstr "Σταθμός Εργασίας Γραφείου" #~ msgid "" #~ "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " #~ "gnumeric), pdf viewers, etc" #~ msgstr "" #~ "Εργαλεία γραφείου: Επεξεργαστές κειμένου(kword, abiword), λογιστικά φύλλα " #~ "(kspread, gnumeric), αρχεία pdf κλπ" #~ msgid "Game station" #~ msgstr "Σταθμός παιχνιδιών" #~ msgid "Amusement programs: arcade, boards, strategy, etc" #~ msgstr "Διασκέδαση (παιχνίδια)" #~ msgid "Multimedia station" #~ msgstr "Σταθμός πολυμέσων" #~ msgid "Sound and video playing/editing programs" #~ msgstr "Προγράμματα αναπαραγωγής και διαχείρισης video και ήχου" #~ msgid "Internet station" #~ msgstr "Σταθμός Διαδικτύου" #, fuzzy #~ msgid "" #~ "Set of tools to read and send mail and news (mutt, tin..) and to browse " #~ "the Web" #~ msgstr "" #~ "Εργαλεία για αποστολή και λήψη αλληλογραφίας και ειδήσεων (pine, mutt, " #~ "tin...) και περιήγηση στο Διαδίκτυο" #~ msgid "Network Computer (client)" #~ msgstr "Υπολογιστής Δικτύου (πελάτης)" #~ msgid "Clients for different protocols including ssh" #~ msgstr "Πελάτες για διαφορετικά πρωτόκολλα συμπεριλαμβανομένου του ssh" #~ msgid "Configuration" #~ msgstr "Ρύθμιση" #~ msgid "Tools to ease the configuration of your computer" #~ msgstr "Εργαλεία για διευκόλυνση της ρύθμισης του υπολογιστή σας" #~ msgid "Scientific Workstation" #~ msgstr "Σταθμός Εργασίας Επιστημονικών εφαρμογών" #~ msgid "Scientific applications such as gnuplot" #~ msgstr "Επιστημονικές εφαρμογές όπως το gnuplot" #~ msgid "Console Tools" #~ msgstr "Εργαλεία Κονσόλας" #~ msgid "Editors, shells, file tools, terminals" #~ msgstr "Επεξεργαστές κειμένου, κελύφη, εργαλεία αρχείων, τερματικά" #~ msgid "KDE Workstation" #~ msgstr "Σταθμός εργασίας KDE" #~ msgid "" #~ "The K Desktop Environment, the basic graphical environment with a " #~ "collection of accompanying tools" #~ msgstr "Το περιβάλλον γραφείου KDE με μια συλλογή συνοδευτικών εργαλείων" #~ msgid "Gnome Workstation" #~ msgstr "Σταθμός Εργασίας Gnome" #~ msgid "" #~ "A graphical environment with user-friendly set of applications and " #~ "desktop tools" #~ msgstr "Γραφικό περιβάλλον με φιλικά εργαλεία και εφαρμογές" #~ msgid "Other Graphical Desktops" #~ msgstr "Άλλα γραφικά περιβάλλοντα" #~ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" #~ msgstr "Icewm, Window Maker, Enlightenment, Fvwm, κλπ" #~ msgid "C and C++ development libraries, programs and include files" #~ msgstr "Βιβλιοθήκες ανάπτυξης C και C++, προγράμματα και άλλα αρχεία" #~ msgid "Documentation" #~ msgstr "Τεκμηρίωση" #~ msgid "Books and Howto's on Linux and Free Software" #~ msgstr "Βιβλία και οδηγοί για το Linux και το Ελεύθερο Λογισμικό" #~ msgid "LSB" #~ msgstr "LSB" #~ msgid "Linux Standard Base. Third party applications support" #~ msgstr "Linux Standard Base. Υποστήριξη εφαρμογών τρίτων" #~ msgid "Web/FTP" #~ msgstr "Web/FTP" #~ msgid "Apache, Pro-ftpd" #~ msgstr "Apache, Pro-ftpd" #~ msgid "Mail" #~ msgstr "Ταχυδρομείο" #~ msgid "Postfix mail server" #~ msgstr "Εξυπηρετητής ταχυδρομείου Postfix" #~ msgid "Database" #~ msgstr "Βάση Δεδομένων" #~ msgid "PostgreSQL or MySQL database server" #~ msgstr "Εξυπηρετητής βάσης δεδομένων PostgreSQL ή MySQL" #~ msgid "Firewall/Router" #~ msgstr "Τοίχος Προστασίας/Δρομολογητής" #~ msgid "Internet gateway" #~ msgstr "Πύλη Διαδικτύου" #~ msgid "DNS/NIS " #~ msgstr "DNS/NIS " #~ msgid "Domain Name and Network Information Server" #~ msgstr "Εξυπηρετητής Όνομα Τομέα και Πληροφοριών Δικτύου" #~ msgid "Network Computer server" #~ msgstr "Εξυπηρετητής δικτύου" #~ msgid "NFS server, SMB server, Proxy server, ssh server" #~ msgstr "" #~ "εξυπηρετητής NFS, εξυπηρετητής SMB, εξυπηρετητής Proxy, εξυπηρετητής ssh" #~ msgid "Set of tools to read and send mail and news and to browse the Web" #~ msgstr "" #~ "Σετ εργαλείων για την αποστολή και λήψη αλληλογραφίας, ειδήσεων και " #~ "περιήγηση στο Διαδίκτυο" #, fuzzy #~ msgid "add" #~ msgstr "Προσθήκη" #, fuzzy #~ msgid "edit" #~ msgstr "Έξοδος" #, fuzzy #~ msgid "remove" #~ msgstr "Αφαίρεσης" #, fuzzy #~ msgid "Add an UPS device" #~ msgstr "Προσθήκη στοιχείου" #, fuzzy #~ msgid "" #~ "Welcome to the UPS configuration utility.\n" #~ "\n" #~ "Here, you'll be add a new UPS to your system.\n" #~ msgstr "" #~ "Καλώς ορίσατε στο εργαλείο ρύθμισης ταχυδρομείου.\n" #~ "\n" #~ "Εδώ, θα μπορέσετε να ρυθμίσετε το σύστημα ειδοποίησης\n" #, fuzzy #~ msgid "Autodetection" #~ msgstr "Αυτόματη ανίχνευση" #, fuzzy #~ msgid "No new UPS devices was found" #~ msgstr "Δεν βρέθηκε εικόνα" #, fuzzy #~ msgid "UPS driver configuration" #~ msgstr "Ρυθμίσεις κοινής χρήσης εκτυπωτών CUPS" #, fuzzy #~ msgid "Please select your UPS model." #~ msgstr "Παρακαλώ δοκιμάστε το ποντίκι" #, fuzzy #~ msgid "Manufacturer / Model:" #~ msgstr "Κατασκευαστή εκτυπωτή, μοντέλο" #, fuzzy #~ msgid "Name:" #~ msgstr "Όνομα: " #, fuzzy #~ msgid "The name of your ups" #~ msgstr "το όνομα κατασκευαστή του επεξεργαστή" #, fuzzy #~ msgid "Port:" #~ msgstr "Θύρα" #, fuzzy #~ msgid "The port on which is connected your ups" #~ msgstr "Ο τύπος της θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας." #, fuzzy #~ msgid "UPS devices" #~ msgstr "Υπηρεσίες" #, fuzzy #~ msgid "UPS users" #~ msgstr "Χρήστες" #, fuzzy #~ msgid "Access Control Lists" #~ msgstr "πρόσβαση σε εργαλεία δικτύου" #, fuzzy #~ msgid "Rules" #~ msgstr "Δρομολογητές:" #, fuzzy #~ msgid "Action" #~ msgstr "Ενέργειες" #, fuzzy #~ msgid "ACL name" #~ msgstr "όνομα LVM;" #, fuzzy #~ msgid "Welcome to the UPS configuration tools" #~ msgstr "Δοκιμή ρυθμίσεων" #~ msgid "Running \"%s\" ..." #~ msgstr "Εκτέλεση του \"%s\"..." #~ msgid "utopia 25" #~ msgstr "utopia 25" #~ msgid "On Hard Drive" #~ msgstr "στον Σκληρό Δίσκο" #~ msgid "Messages" #~ msgstr "Μηνύματα" #~ msgid "Syslog" #~ msgstr "Syslog" #~ msgid "Compact" #~ msgstr "Συμπαγής" #, fuzzy #~ msgid "Next ->" #~ msgstr "Επόμενο" #, fuzzy #~ msgid "<- Previous" #~ msgstr "Προηγούμενο" #, fuzzy #~ msgid "Next->" #~ msgstr "Επόμενο"