# Danish translation of/Dansk overs�ttelse af
# Mandrake Linux DrakX.
# Copyright (C) 1999-2001 MandrakeSoft
#
# In order of activity:
# 1, Keld Simonsen <keld@dkuug.dk>, 2000-2001
# 2, Jacob Nordfalk <nordfalk@mobilixnet.dk>, 2001
# 3, Troels Liebe Bentsen <tlb@iname.com>, 1999-2000
# 4, Nikolaj Berg Amondsen <mr_nba@get2net.dk>, 2000
# 5, Jacob Sparre Andersen, <sparre@sslug.dk>, 2000
# 6, Kenneth Christiansen, <kenneth@ripen.dk>, 2000
# 7, Jens Burkal <jburkal@get2net.dk>, 1999
# 8, Mads Stenhuus Hansen <msh@com.dtu.dk>, 1999
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX VERSION\n"
"POT-Creation-Date: 2001-09-21 19:50+0200\n"
"PO-Revision-Date: 2001-09-28 13:21+0200\n"
"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
"Language-Team: dansk <dansk@klid.dk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=ISO-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfigurator.pm_.c:231
msgid "Configure all heads independently"
msgstr "Konfigur�r alle sk�rme uafh�ngigt"

#: ../../Xconfigurator.pm_.c:232
msgid "Use Xinerama extension"
msgstr "Brug Xinerama-udvidelse"

#: ../../Xconfigurator.pm_.c:235
#, c-format
msgid "Configure only card \"%s\" (%s)"
msgstr "Konfigur�r kun kort \"%s\" (%s)"

#: ../../Xconfigurator.pm_.c:238
msgid "Multi-head configuration"
msgstr "Flersk�rms-konfiguration"

#: ../../Xconfigurator.pm_.c:239
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Dit system underst�tter konfiguration af flere sk�rme\n"
"Hvad vil du g�re?"

#: ../../Xconfigurator.pm_.c:248
msgid "Graphic card"
msgstr "Grafikkort"

#: ../../Xconfigurator.pm_.c:248
msgid "Select a graphic card"
msgstr "V�lg et grafikkort"

#: ../../Xconfigurator.pm_.c:249
msgid "Choose a X server"
msgstr "V�lg en X-server"

#: ../../Xconfigurator.pm_.c:249
msgid "X server"
msgstr "X-server"

#: ../../Xconfigurator.pm_.c:307 ../../Xconfigurator.pm_.c:313
#: ../../Xconfigurator.pm_.c:363 ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfigurator.pm_.c:310
msgid "Which configuration of XFree do you want to have?"
msgstr "Hvilken konfiguration af XFree �nsker du?"

#: ../../Xconfigurator.pm_.c:321
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
"Dit kort er underst�ttet af XFree %s som kan have bedre underst�ttelse i 2D."

#: ../../Xconfigurator.pm_.c:323 ../../Xconfigurator.pm_.c:356
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
"Dit kort kan have 3D hardware accelerations-underst�ttelse med XFree %s."

#: ../../Xconfigurator.pm_.c:325 ../../Xconfigurator.pm_.c:358
#: ../../Xconfigurator.pm_.c:1435
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s med 3D hardware acceleration"

#: ../../Xconfigurator.pm_.c:333 ../../Xconfigurator.pm_.c:347
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Dit kort kan have 3D acceleration underst�ttelse, men kun med XFree %s,\n"
"VIGTIGT: Dette er eksperimentelt og kan f� din maskine til at l�se eller g� "
"ned."

#: ../../Xconfigurator.pm_.c:335 ../../Xconfigurator.pm_.c:349
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"

#: ../../Xconfigurator.pm_.c:344
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Dit kort kan have 3D acceleration underst�ttelse, men kun med XFree %s.\n"
"VIGTIGT: Dette er eksperimentelt og kan f� din maskine til at l�se eller g� "
"ned.\n"
"Dit kort er underst�ttet af XFree %s som kan have bedre underst�ttelse i 2D."

#: ../../Xconfigurator.pm_.c:364
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installations-sk�rmdriver)"

#: ../../Xconfigurator.pm_.c:368
msgid "XFree configuration"
msgstr "XFree konfiguration"

#: ../../Xconfigurator.pm_.c:434
msgid "Select the memory size of your graphic card"
msgstr "V�lg hukommelsesm�ngde for dit grafikkort"

#: ../../Xconfigurator.pm_.c:492
msgid "Choose options for server"
msgstr "V�lg server-indstillinger"

#: ../../Xconfigurator.pm_.c:516
msgid "Choose a monitor"
msgstr "V�lg en sk�rmtype"

#: ../../Xconfigurator.pm_.c:516
msgid "Monitor"
msgstr "Sk�rm"

#: ../../Xconfigurator.pm_.c:519
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange\n"
"gange (per sekund) hele sk�rmbilledet bliver genopfrisket, og (vigtigst af "
"alt)\n"
"den vandrette frekvens, som angiver antallet af vandrette linier der kan\n"
"tegnes p� sk�rmen hvert sekund.\n"
"\n"
"Det er MEGET VIGTIGT at du ikke angiver en sk�rmtype med "
"opdateringsfrekvenser,\n"
"der er st�rre end din sk�rms form�en: du risikerer at �del�gge din sk�rm.\n"
"Hvis du er i tvivl, b�r du v�lge en ops�tning, som du med SIKKERHED ved\n"
"at din sk�rm kan klare."

#: ../../Xconfigurator.pm_.c:526
msgid "Horizontal refresh rate"
msgstr "Vandret opdateringsfrekvens"

#: ../../Xconfigurator.pm_.c:527
msgid "Vertical refresh rate"
msgstr "Lodret opdateringsfrekvens"

#: ../../Xconfigurator.pm_.c:564
msgid "Monitor not configured"
msgstr "Sk�rm ikke konfigureret"

#: ../../Xconfigurator.pm_.c:567
msgid "Graphic card not configured yet"
msgstr "Grafikkort er endnu ikke konfigureret"

#: ../../Xconfigurator.pm_.c:570
msgid "Resolutions not chosen yet"
msgstr "Opl�sninger ikke valgt endnu"

#: ../../Xconfigurator.pm_.c:587
msgid "Do you want to test the configuration?"
msgstr "�nsker du at afpr�ve konfigurationen?"

#: ../../Xconfigurator.pm_.c:591
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Advarsel: afpr�vning af dette grafikkort kan f� din maskine til at l�se"

#: ../../Xconfigurator.pm_.c:594
msgid "Test of the configuration"
msgstr "Test konfigurationen"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid ""
"\n"
"try to change some parameters"
msgstr ""
"\n"
"pr�v at �ndre nogle parametre"

#: ../../Xconfigurator.pm_.c:632 ../../Xconfigurator.pm_.c:644
msgid "An error has occurred:"
msgstr "En fejl opstod:"

#: ../../Xconfigurator.pm_.c:668
#, c-format
msgid "Leaving in %d seconds"
msgstr "Vender tilbage om %d sekunder"

#: ../../Xconfigurator.pm_.c:679
msgid "Is this the correct setting?"
msgstr "Er dette den korrekte indstilling?"

#: ../../Xconfigurator.pm_.c:688
msgid "An error has occurred, try to change some parameters"
msgstr "En fejl opstod, pr�v at �ndre nogle parametre"

#: ../../Xconfigurator.pm_.c:759
msgid "Resolution"
msgstr "Opl�sning"

#: ../../Xconfigurator.pm_.c:810
msgid "Choose the resolution and the color depth"
msgstr "V�lg opl�sning og farvedybde"

#: ../../Xconfigurator.pm_.c:812
#, c-format
msgid "Graphic card: %s"
msgstr "Grafikkort: %s"

#: ../../Xconfigurator.pm_.c:813
#, c-format
msgid "XFree86 server: %s"
msgstr "XFree86-server: %s"

#: ../../Xconfigurator.pm_.c:829 ../../printerdrake.pm_.c:1885
#: ../../standalone/draknet_.c:298 ../../standalone/draknet_.c:301
msgid "Expert Mode"
msgstr "Ekspert modus"

#: ../../Xconfigurator.pm_.c:830
msgid "Show all"
msgstr "Vis alle"

#: ../../Xconfigurator.pm_.c:875
msgid "Resolutions"
msgstr "Opl�sninger"

#: ../../Xconfigurator.pm_.c:1437
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tastatur-type: %s\n"

#: ../../Xconfigurator.pm_.c:1438
#, c-format
msgid "Mouse type: %s\n"
msgstr "Muse-type: %s\n"

#: ../../Xconfigurator.pm_.c:1439
#, c-format
msgid "Mouse device: %s\n"
msgstr "Muse-enhed: %s\n"

#: ../../Xconfigurator.pm_.c:1440
#, c-format
msgid "Monitor: %s\n"
msgstr "Sk�rm: %s\n"

#: ../../Xconfigurator.pm_.c:1441
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Sk�rms vandrette frekvens: %s\n"

#: ../../Xconfigurator.pm_.c:1442
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Sk�rms lodrette frekvens: %s\n"

#: ../../Xconfigurator.pm_.c:1443
#, c-format
msgid "Graphic card: %s\n"
msgstr "Grafikkort: %s\n"

#: ../../Xconfigurator.pm_.c:1444
#, c-format
msgid "Graphic card identification: %s\n"
msgstr "Grafikkort identifikation: %s\n"

#: ../../Xconfigurator.pm_.c:1445
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr "Grafik-hukommelse: %s kb\n"

#: ../../Xconfigurator.pm_.c:1447
#, c-format
msgid "Color depth: %s\n"
msgstr "Farvedybde: %s\n"

#: ../../Xconfigurator.pm_.c:1448
#, c-format
msgid "Resolution: %s\n"
msgstr "Opl�sninger %s\n"

#: ../../Xconfigurator.pm_.c:1450
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86-server: %s\n"

#: ../../Xconfigurator.pm_.c:1451
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 driver: %s\n"

#: ../../Xconfigurator.pm_.c:1469
msgid "Preparing X-Window configuration"
msgstr "Forbereder konfiguration af X"

#: ../../Xconfigurator.pm_.c:1489
msgid "What do you want to do?"
msgstr "Hvad �nsker du at g�re?"

#: ../../Xconfigurator.pm_.c:1494
msgid "Change Monitor"
msgstr "Skift sk�rmtype"

#: ../../Xconfigurator.pm_.c:1495
msgid "Change Graphic card"
msgstr "Skift grafikkort"

#: ../../Xconfigurator.pm_.c:1497
msgid "Change Server options"
msgstr "Foretag �ndringer i server-indstillinger"

#: ../../Xconfigurator.pm_.c:1498
msgid "Change Resolution"
msgstr "Skift opl�sning"

#: ../../Xconfigurator.pm_.c:1499
msgid "Show information"
msgstr "Vis information"

#: ../../Xconfigurator.pm_.c:1500
msgid "Test again"
msgstr "Test igen"

#: ../../Xconfigurator.pm_.c:1501 ../../bootlook.pm_.c:156
msgid "Quit"
msgstr "Afslut"

#: ../../Xconfigurator.pm_.c:1509
#, c-format
msgid ""
"Keep the changes?\n"
"Current configuration is:\n"
"\n"
"%s"
msgstr ""
"Behold �ndringer?\n"
"Nuv�rende konfiguration er:\n"
"\n"
"%s"

#: ../../Xconfigurator.pm_.c:1532
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Log venligst ind i %s igen for at aktivere �ndringerne"

#: ../../Xconfigurator.pm_.c:1552
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Log venligst ud og tryk herefter p� Ctrl-Alt-Bak"

#: ../../Xconfigurator.pm_.c:1555
msgid "X at startup"
msgstr "Start X ved systemstart"

#: ../../Xconfigurator.pm_.c:1556
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""
"Jeg kan s�tte din maskine op til automatisk at starte X ved\n"
"opstart. �nsker du at starte X hver gang du genstarter?"

#: ../../Xconfigurator_consts.pm_.c:6
msgid "256 colors (8 bits)"
msgstr "256 farver (8 bit)"

#: ../../Xconfigurator_consts.pm_.c:7
msgid "32 thousand colors (15 bits)"
msgstr "32 tusinde farver (15 bit)"

#: ../../Xconfigurator_consts.pm_.c:8
msgid "65 thousand colors (16 bits)"
msgstr "65 tusinde farver (16 bit)"

#: ../../Xconfigurator_consts.pm_.c:9
msgid "16 million colors (24 bits)"
msgstr "16 millioner (24 bit)"

#: ../../Xconfigurator_consts.pm_.c:10
msgid "4 billion colors (32 bits)"
msgstr "4 milliarder farver (32 bit)"

#: ../../Xconfigurator_consts.pm_.c:106
msgid "256 kB"
msgstr "256 kb"

#: ../../Xconfigurator_consts.pm_.c:107
msgid "512 kB"
msgstr "512 kb"

#: ../../Xconfigurator_consts.pm_.c:108
msgid "1 MB"
msgstr "1 Mb"

#: ../../Xconfigurator_consts.pm_.c:109
msgid "2 MB"
msgstr "2 Mb"

#: ../../Xconfigurator_consts.pm_.c:110
msgid "4 MB"
msgstr "4 Mb"

#: ../../Xconfigurator_consts.pm_.c:111
msgid "8 MB"
msgstr "8 Mb"

#: ../../Xconfigurator_consts.pm_.c:112
msgid "16 MB"
msgstr "16 Mb"

#: ../../Xconfigurator_consts.pm_.c:113
msgid "32 MB"
msgstr "32 Mb"

#: ../../Xconfigurator_consts.pm_.c:114
msgid "64 MB or more"
msgstr "64 Mb eller mere"

#: ../../Xconfigurator_consts.pm_.c:122
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr "Standard-VGA, 640x480 ved 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:123
msgid "Super VGA, 800x600 at 56 Hz"
msgstr "Super-VGA, 800x600 ved 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:124
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"

#: ../../Xconfigurator_consts.pm_.c:125
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"

#: ../../Xconfigurator_consts.pm_.c:126
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr "Udvidet Super-VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:127
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr "Non-Interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"

#: ../../Xconfigurator_consts.pm_.c:128
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr "H�jfrekvens SVGA, 1024x768 ved 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:129
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr "Multi-frekvens, som kan klare 1280x1024 ved 60 Hz"

#: ../../Xconfigurator_consts.pm_.c:130
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr "Multi-frekvens, som kan klare 1280x1024 ved 74 Hz"

#: ../../Xconfigurator_consts.pm_.c:131
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr "Multi-frekvens, som kan klare 1280x1024 ved 76 Hz"

#: ../../Xconfigurator_consts.pm_.c:132
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr "Sk�rm, som kan klare 1600x1200 ved 70 Hz"

#: ../../Xconfigurator_consts.pm_.c:133
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr "Sk�rm, som kan klare 1600x1200 ved 76 Hz"

#: ../../any.pm_.c:96 ../../any.pm_.c:121
msgid "First sector of boot partition"
msgstr "F�rste sektor af opstartspartition"

#: ../../any.pm_.c:96 ../../any.pm_.c:121 ../../any.pm_.c:194
msgid "First sector of drive (MBR)"
msgstr "F�rste sektor p� disken (MBR)"

#: ../../any.pm_.c:100
msgid "SILO Installation"
msgstr "SILO-installering"

#: ../../any.pm_.c:101 ../../any.pm_.c:114
msgid "Where do you want to install the bootloader?"
msgstr "Hvor vil du placere opstartsprogrammet?"

#: ../../any.pm_.c:113
msgid "LILO/grub Installation"
msgstr "LILO/grub-installering"

#: ../../any.pm_.c:125 ../../any.pm_.c:139
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:127
msgid "LILO with text menu"
msgstr "LILO med tekstmenu"

#: ../../any.pm_.c:128 ../../any.pm_.c:139
msgid "LILO with graphical menu"
msgstr "LILO med grafisk menu"

#: ../../any.pm_.c:131
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:135
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Start fra DOS/Windows (loadlin)"

#: ../../any.pm_.c:137 ../../any.pm_.c:139
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:145 ../../any.pm_.c:177
msgid "Bootloader main options"
msgstr "Systemopstarterens hovedindstillinger"

#: ../../any.pm_.c:146 ../../any.pm_.c:178
msgid "Bootloader to use"
msgstr "Systemopstarter der skal bruges"

#: ../../any.pm_.c:148
msgid "Bootloader installation"
msgstr "Systemopstarterens installation"

#: ../../any.pm_.c:150 ../../any.pm_.c:180
msgid "Boot device"
msgstr "Opstartsenhed"

#: ../../any.pm_.c:151
msgid "LBA (doesn't work on old BIOSes)"
msgstr "LBA (virker ikke med gamle BIOS'er)"

#: ../../any.pm_.c:152
msgid "Compact"
msgstr "Kompakt"

#: ../../any.pm_.c:152
msgid "compact"
msgstr "kompakt"

#: ../../any.pm_.c:153 ../../any.pm_.c:250
msgid "Video mode"
msgstr "Videoindstilling"

#: ../../any.pm_.c:155
msgid "Delay before booting default image"
msgstr "Ventetid f�r opstart af forvalgt styresystem"

#: ../../any.pm_.c:157 ../../any.pm_.c:730
#: ../../install_steps_interactive.pm_.c:938 ../../network/modem.pm_.c:46
#: ../../printerdrake.pm_.c:402 ../../printerdrake.pm_.c:481
#: ../../standalone/draknet_.c:603
msgid "Password"
msgstr "Adgangskode"

#: ../../any.pm_.c:158 ../../any.pm_.c:731
#: ../../install_steps_interactive.pm_.c:939
msgid "Password (again)"
msgstr "Adgangskode (igen)"

#: ../../any.pm_.c:159
msgid "Restrict command line options"
msgstr "Begr�ns kommandolinie-indstillinger"

#: ../../any.pm_.c:159
msgid "restrict"
msgstr "begr�ns"

#: ../../any.pm_.c:161
msgid "Clean /tmp at each boot"
msgstr "Rens /tmp ved hver systemopstart"

#: ../../any.pm_.c:162
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Pr�cis RAM-m�ngde, hvis p�kr�vet (fandt %d Mb)"

#: ../../any.pm_.c:164
msgid "Enable multi profiles"
msgstr "Aktiv�r multiprofiler"

#: ../../any.pm_.c:168
msgid "Give the ram size in MB"
msgstr "Angiv RAM-st�rrelse i Mb"

#: ../../any.pm_.c:170
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Indstillingen ``Begr�ns kommandolinie-indstillinger'' er intet v�rd uden\n"
"en adgangskode"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "Please try again"
msgstr "Pr�v venligst igen"

#: ../../any.pm_.c:171 ../../any.pm_.c:707
#: ../../install_steps_interactive.pm_.c:933
msgid "The passwords do not match"
msgstr "Adgangskoderne stemmer ikke overens"

#: ../../any.pm_.c:179
msgid "Init Message"
msgstr "Init-besked"

#: ../../any.pm_.c:181
msgid "Open Firmware Delay"
msgstr "�ben firmwareforsinkelse"

#: ../../any.pm_.c:182
msgid "Kernel Boot Timeout"
msgstr "Ventetid f�r kerneopstart"

#: ../../any.pm_.c:183
msgid "Enable CD Boot?"
msgstr "Skal det v�re muligt at starte fra CD?"

#: ../../any.pm_.c:184
msgid "Enable OF Boot?"
msgstr "Skal det v�re muligt at starte fra OF?"

#: ../../any.pm_.c:185
msgid "Default OS?"
msgstr "Forvalgt styresystem?"

#: ../../any.pm_.c:207
msgid ""
"Here are the different entries.\n"
"You can add some more or change the existing ones."
msgstr ""
"Her er f�lgende typer indgange.\n"
"Du kan tilf�je flere eller �ndre de eksisterende."

#: ../../any.pm_.c:217
msgid "Add"
msgstr "Tilf�j"

#: ../../any.pm_.c:217 ../../any.pm_.c:718 ../../diskdrake.pm_.c:161
#: ../../interactive_http.pm_.c:153 ../../printerdrake.pm_.c:1846
#: ../../printerdrake.pm_.c:1847 ../../printerdrake.pm_.c:1904
#: ../../printerdrake.pm_.c:1948
msgid "Done"
msgstr "F�rdig"

#: ../../any.pm_.c:217
msgid "Modify"
msgstr "�ndr"

#: ../../any.pm_.c:225
msgid "Which type of entry do you want to add?"
msgstr "Hvilken type �nsker du at tilf�je"

#: ../../any.pm_.c:226
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:226
msgid "Other OS (SunOS...)"
msgstr "Andet styresystem (SunOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (MacOS...)"
msgstr "Andet styresystem (MacOS...)"

#: ../../any.pm_.c:227
msgid "Other OS (windows...)"
msgstr "Andet styresystem (Windows...)"

#: ../../any.pm_.c:246
msgid "Image"
msgstr "Billede"

#: ../../any.pm_.c:247 ../../any.pm_.c:258
msgid "Root"
msgstr "Rod"

#: ../../any.pm_.c:248 ../../any.pm_.c:277
msgid "Append"
msgstr "Vedh�ft"

#: ../../any.pm_.c:252
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:253
msgid "Read-write"
msgstr "L�s-skriv"

#: ../../any.pm_.c:260
msgid "Table"
msgstr "Tabel"

#: ../../any.pm_.c:261
msgid "Unsafe"
msgstr "Usikker"

#: ../../any.pm_.c:268 ../../any.pm_.c:273 ../../any.pm_.c:276
msgid "Label"
msgstr "M�rkat"

#: ../../any.pm_.c:270 ../../any.pm_.c:281
msgid "Default"
msgstr "Forvalgt"

#: ../../any.pm_.c:278
msgid "Initrd-size"
msgstr "Initrd-st�rrelse"

#: ../../any.pm_.c:280
msgid "NoVideo"
msgstr "Ingen video"

#: ../../any.pm_.c:288
msgid "Remove entry"
msgstr "Fjern indgang"

#: ../../any.pm_.c:291
msgid "Empty label not allowed"
msgstr "Tom m�rkat er ikke tilladt"

#: ../../any.pm_.c:292
msgid "This label is already used"
msgstr "Denne m�rkat er allerede brugt"

#: ../../any.pm_.c:597
#, c-format
msgid "Found %s %s interfaces"
msgstr "Fandt %s %s gr�nsesnit"

#: ../../any.pm_.c:598
msgid "Do you have another one?"
msgstr "Har du �n til?"

#: ../../any.pm_.c:599
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Har du nogen %s gr�nsesnit?"

#: ../../any.pm_.c:601 ../../any.pm_.c:760 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "No"
msgstr "Nej"

#: ../../any.pm_.c:601 ../../any.pm_.c:759 ../../interactive.pm_.c:112
#: ../../my_gtk.pm_.c:715
msgid "Yes"
msgstr "Ja"

#: ../../any.pm_.c:602
msgid "See hardware info"
msgstr "Se info for maskinel"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:637
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Installerer driver for %s kort %s"

#: ../../any.pm_.c:638
#, c-format
msgid "(module %s)"
msgstr "(modul %s)"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:649
#, c-format
msgid "Which %s driver should I try?"
msgstr "Hvilken %s driver skal jeg pr�ve?"

#: ../../any.pm_.c:657
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"I nogen tilf�lde beh�ver %s driveren at have ekstra information for at "
"virke\n"
"ordentligt, selv om den normalt virker fint uden. �nsker du at angive "
"ekstra\n"
"optioner for den eller tillade driveren at sondere din maskine for\n"
"den information den beh�ver? Af og til vil sondering stoppe maskinen, men "
"burde\n"
"ikke for�rsage nogen skader."

#: ../../any.pm_.c:662
msgid "Autoprobe"
msgstr "Automatisk sondering"

#: ../../any.pm_.c:662
msgid "Specify options"
msgstr "Specific�r optioner"

#: ../../any.pm_.c:666
#, c-format
msgid "You may now provide its options to module %s."
msgstr "Du kan nu give dens optioner til modul %s."

#: ../../any.pm_.c:672
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Du kan nu s�tte parametre til modulet %s.\n"
"Parametrene er i formatet ``navn=v�rdi navn2=v�rdi2 ...''.\n"
"F.eks., ``io=0x300 irq=7''"

#: ../../any.pm_.c:675
msgid "Module options:"
msgstr "Modulindstillinger:"

#: ../../any.pm_.c:686
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Indl�sning af modul %s mislykkedes.\n"
"�nsker du at pr�ve igen med andre parametre?"

#: ../../any.pm_.c:704
#, c-format
msgid "(already added %s)"
msgstr "(har allerede tilf�jet %s)"

#: ../../any.pm_.c:708
msgid "This password is too simple"
msgstr "Adgangskoden er for simpel"

#: ../../any.pm_.c:709
msgid "Please give a user name"
msgstr "Indtast venligst et brugernavn"

#: ../../any.pm_.c:710
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Brugernavnet m� kun indeholde sm� bogstaver, tal, `-' og `_'"

#: ../../any.pm_.c:711
msgid "This user name is already added"
msgstr "Dette brugernavn eksisterer allerede"

#: ../../any.pm_.c:715
msgid "Add user"
msgstr "Tilf�j bruger"

#: ../../any.pm_.c:716
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Indtast en bruger\n"
"%s"

#: ../../any.pm_.c:717
msgid "Accept user"
msgstr "Accept�r bruger"

#: ../../any.pm_.c:728
msgid "Real name"
msgstr "Rigtige navn"

#: ../../any.pm_.c:729 ../../printerdrake.pm_.c:401
#: ../../printerdrake.pm_.c:480
msgid "User name"
msgstr "Brugernavn"

#: ../../any.pm_.c:732
msgid "Shell"
msgstr "Skal"

#: ../../any.pm_.c:734
msgid "Icon"
msgstr "Ikon"

#: ../../any.pm_.c:756
msgid "Autologin"
msgstr "Autologin"

#: ../../any.pm_.c:757
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Jeg kan s�tte din maskine op til automatisk at logge en bestemt bruger p�.\n"
"�nsker du at bruge denne finesse?"

#: ../../any.pm_.c:761
msgid "Choose the default user:"
msgstr "V�lg forvalgte bruger:"

#: ../../any.pm_.c:762
msgid "Choose the window manager to run:"
msgstr "V�lg den vinduesbehandler du �nsker at benytte:"

#: ../../any.pm_.c:771
msgid "Please, choose a language to use."
msgstr "V�lg venligst det sprog, du vil bruge."

#: ../../any.pm_.c:773
msgid "You can choose other languages that will be available after install"
msgstr ""
"Du kan v�lge andre sprog der vil v�re tilg�ngelige efter installationen"

#: ../../any.pm_.c:785 ../../install_steps_interactive.pm_.c:633
msgid "All"
msgstr "Alt"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:259
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Velkommen til %s styresystems-v�lger!\n"
"\n"
"V�lg et styresystem i den ovenst�ende liste eller\n"
"vent %d sekunder for at starte standard.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the suggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
#
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:835
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Velkommen til GRUB styresystemsv�lgeren!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:838
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Brug tasterne %c og %c til at v�lge mellem mulighederne."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:841
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:844
msgid "commands before booting, or 'c' for a command-line."
msgstr "kommandoerne f�r opstart, eller 'c' for en kommandolinie."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:847
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Den fremh�vede mulighed vil blive startet automatisk om %d sekunder."

#: ../../bootloader.pm_.c:851
msgid "not enough room in /boot"
msgstr "Ikke nok plads i /boot"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:951
msgid "Desktop"
msgstr "Skrivebord"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:953
msgid "Start Menu"
msgstr "Start-menu"

#: ../../bootloader.pm_.c:972
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Du kan ikke installere opstartsindl�seren p� en %s-partition\n"

#: ../../bootlook.pm_.c:46
msgid "no help implemented yet.\n"
msgstr "endnu er ingen hj�lp implementeret.\n"

#: ../../bootlook.pm_.c:62
msgid "Boot Style Configuration"
msgstr "Konfiguration af opstartsudseende"

#: ../../bootlook.pm_.c:79
msgid "/_File"
msgstr "/_Fil"

#: ../../bootlook.pm_.c:80
msgid "/File/_Quit"
msgstr "/Fil/_Afslut"

#: ../../bootlook.pm_.c:80
msgid "<control>Q"
msgstr "<kontrol>Q"

#: ../../bootlook.pm_.c:91
msgid "NewStyle Categorizing Monitor"
msgstr "Katergoriserende oversigt i ny stil"

#: ../../bootlook.pm_.c:92
msgid "NewStyle Monitor"
msgstr "Oversigt i ny stil"

#: ../../bootlook.pm_.c:93
msgid "Traditional Monitor"
msgstr "Traditionel oversigt"

#: ../../bootlook.pm_.c:94
msgid "Traditional Gtk+ Monitor"
msgstr "Traditionel Gtk+-oversigt"

#: ../../bootlook.pm_.c:95
msgid "Launch Aurora at boot time"
msgstr "Start Aurora ved opstart"

#: ../../bootlook.pm_.c:100
msgid "Lilo/grub mode"
msgstr "Lilo/grub modus"

#: ../../bootlook.pm_.c:102
#, c-format
msgid ""
"You are currently using %s as Boot Manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Du bruger for �jeblikket % som opstartsh�ndterer.\n"
"Klik p� Konfigur�r for at starte ops�tnings-hj�lperen."

#: ../../bootlook.pm_.c:104 ../../standalone/drakgw_.c:643
#: ../../standalone/draknet_.c:280 ../../standalone/tinyfirewall_.c:57
msgid "Configure"
msgstr "Konfigur�r"

#: ../../bootlook.pm_.c:108
msgid "Boot mode"
msgstr "Opstartsm�de"

#: ../../bootlook.pm_.c:136
msgid "System mode"
msgstr "Systemmodus"

#: ../../bootlook.pm_.c:138
msgid "Launch the X-Window system at start"
msgstr "Start X-vinduessystemet efter opstart"

#: ../../bootlook.pm_.c:143
msgid "No, I don't want autologin"
msgstr "Nej, jeg �nsker ikke automatisk login"

#: ../../bootlook.pm_.c:145
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Ja, jeg �nsker automatisk login med denne (bruger, skrivebord)"

#: ../../bootlook.pm_.c:155 ../../standalone/draknet_.c:108
#: ../../standalone/draknet_.c:140 ../../standalone/draknet_.c:208
#: ../../standalone/draknet_.c:320 ../../standalone/draknet_.c:433
#: ../../standalone/draknet_.c:507 ../../standalone/draknet_.c:543
#: ../../standalone/draknet_.c:644
msgid "OK"
msgstr "OK"

#: ../../bootlook.pm_.c:156 ../../install_steps_gtk.pm_.c:516
#: ../../interactive.pm_.c:122 ../../interactive.pm_.c:286
#: ../../interactive.pm_.c:308 ../../interactive_stdio.pm_.c:27
#: ../../my_gtk.pm_.c:416 ../../my_gtk.pm_.c:419 ../../my_gtk.pm_.c:716
#: ../../printerdrake.pm_.c:1158 ../../standalone/drakgw_.c:648
#: ../../standalone/draknet_.c:115 ../../standalone/draknet_.c:147
#: ../../standalone/draknet_.c:313 ../../standalone/draknet_.c:519
#: ../../standalone/draknet_.c:658 ../../standalone/tinyfirewall_.c:63
msgid "Cancel"
msgstr "Annull�r"

#: ../../bootlook.pm_.c:224
#, c-format
msgid "can not open /etc/inittab for reading: %s"
msgstr "kan ikke l�se /etc/inittab: %s"

#: ../../bootlook.pm_.c:336 ../../standalone/drakboot_.c:47
msgid "Installation of LILO failed. The following error occured:"
msgstr "Installationen af LILO mislykkedes. F�lgende fejl opstod:"

#: ../../common.pm_.c:93
msgid "GB"
msgstr "Gb"

#: ../../common.pm_.c:93
msgid "KB"
msgstr "Kb"

#: ../../common.pm_.c:93 ../../install_steps_graphical.pm_.c:287
#: ../../install_steps_graphical.pm_.c:334
msgid "MB"
msgstr "Mb"

#: ../../common.pm_.c:101
msgid "TB"
msgstr "Tb"

#: ../../common.pm_.c:109
#, c-format
msgid "%d minutes"
msgstr "%d minutter"

#: ../../common.pm_.c:111
msgid "1 minute"
msgstr "1 minut"

#: ../../common.pm_.c:113
#, c-format
msgid "%d seconds"
msgstr "%d sekunder"

#: ../../diskdrake.pm_.c:100
msgid "Please make a backup of your data first"
msgstr "Lav venligst en sikkerhedkopi af dine data f�rst"

#: ../../diskdrake.pm_.c:100 ../../diskdrake_interactive.pm_.c:801
#: ../../diskdrake_interactive.pm_.c:810 ../../diskdrake_interactive.pm_.c:864
msgid "Read carefully!"
msgstr "L�s omhyggeligt!"

#: ../../diskdrake.pm_.c:103
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Hvis du planl�gger at bruge Yaboot, skal du huske at efterlade fri plads p�\n"
"begyndelsen af disken (2048 sektorer skulle v�re nok)"

#: ../../diskdrake.pm_.c:122 ../../diskdrake_interactive.pm_.c:313
#: ../../diskdrake_interactive.pm_.c:328 ../../install_steps.pm_.c:72
#: ../../install_steps_interactive.pm_.c:37
#: ../../install_steps_interactive.pm_.c:310 ../../interactive_http.pm_.c:119
#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:62
msgid "Error"
msgstr "Fejl"

#: ../../diskdrake.pm_.c:159
msgid "Wizard"
msgstr "Guide"

#: ../../diskdrake.pm_.c:181
msgid "New"
msgstr "Ny"

#: ../../diskdrake.pm_.c:203 ../../diskdrake.pm_.c:206
msgid "Remote"
msgstr "Ekstern"

#: ../../diskdrake.pm_.c:208 ../../diskdrake.pm_.c:479
#: ../../diskdrake_interactive.pm_.c:352 ../../diskdrake_interactive.pm_.c:523
msgid "Mount point"
msgstr "Monteringssti"

#: ../../diskdrake.pm_.c:209
msgid "Options"
msgstr "Valg"

#: ../../diskdrake.pm_.c:211 ../../diskdrake.pm_.c:417
#: ../../diskdrake.pm_.c:534 ../../diskdrake_interactive.pm_.c:353
#: ../../diskdrake_interactive.pm_.c:488
msgid "Type"
msgstr "Type"

#: ../../diskdrake.pm_.c:223 ../../diskdrake_interactive.pm_.c:361
msgid "Unmount"
msgstr "Afmont�r"

#: ../../diskdrake.pm_.c:224 ../../diskdrake_interactive.pm_.c:357
msgid "Mount"
msgstr "Mont�r"

#: ../../diskdrake.pm_.c:228
msgid "Choose action"
msgstr "V�lg handling"

#: ../../diskdrake.pm_.c:235
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Du har �n stor FAT partition.\n"
"(normalt brugt af Microsoft Dos/Windows).\n"
"Jeg anbefaler, at du �ndrer st�rrelsen p� partitionen\n"
"(klik p� den, og klik herefter p� \"St�rrelses�ndring\")"

#: ../../diskdrake.pm_.c:238
msgid "Please click on a partition"
msgstr "Klik venligst p� en partition"

#: ../../diskdrake.pm_.c:240
msgid "Please click on a media"
msgstr "Klik venligst p� et medie"

#: ../../diskdrake.pm_.c:243
msgid ""
"Please click on a button above\n"
"\n"
"Or use \"New\""
msgstr ""
"Klik venligst p� en knap ovenover\n"
"Eller brug 'Ny'"

#: ../../diskdrake.pm_.c:244
msgid "Use \"New\""
msgstr "Brug 'Ny'"

#: ../../diskdrake.pm_.c:263 ../../install_steps_gtk.pm_.c:517
msgid "Details"
msgstr "Detaljer"

#: ../../diskdrake.pm_.c:395
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake.pm_.c:395
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake.pm_.c:395
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake.pm_.c:395
msgid "Journalised FS"
msgstr "Journaliserende FS"

#: ../../diskdrake.pm_.c:395
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake.pm_.c:395
msgid "Swap"
msgstr "Swap"

#: ../../diskdrake.pm_.c:396 ../../diskdrake_interactive.pm_.c:952
msgid "Empty"
msgstr "Tom"

#: ../../diskdrake.pm_.c:396 ../../install_steps_gtk.pm_.c:373
#: ../../install_steps_gtk.pm_.c:433 ../../mouse.pm_.c:161
#: ../../services.pm_.c:161
msgid "Other"
msgstr "Andet"

#: ../../diskdrake.pm_.c:400
msgid "Filesystem types:"
msgstr "Filsystems-typer:"

#: ../../diskdrake.pm_.c:417 ../../diskdrake_interactive.pm_.c:375
msgid "Create"
msgstr "Opret"

#: ../../diskdrake.pm_.c:417 ../../diskdrake.pm_.c:419
#, c-format
msgid "Use ``%s'' instead"
msgstr "Benyt ``%s'' i stedet"

#: ../../diskdrake.pm_.c:419 ../../diskdrake_interactive.pm_.c:362
msgid "Delete"
msgstr "Slet"

#: ../../diskdrake.pm_.c:423
msgid "Use ``Unmount'' first"
msgstr "Benyt ``Afmont�r'' f�rst"

#: ../../diskdrake.pm_.c:424 ../../diskdrake_interactive.pm_.c:480
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Efter type-�ndring af partition %s vil alle data p� denne partition g� tabt"

#: ../../diskdrake.pm_.c:478 ../../diskdrake_interactive.pm_.c:522
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Hvor �nsker du at montere partitionen %s?"

#: ../../diskdrake.pm_.c:500
msgid "Mount options"
msgstr "Modulindstillinger"

#: ../../diskdrake.pm_.c:507
msgid "Various"
msgstr "Diverse"

#: ../../diskdrake.pm_.c:525
msgid "Removable media"
msgstr "Flytbare medier"

#: ../../diskdrake.pm_.c:532
msgid "Change type"
msgstr "Skift type"

#: ../../diskdrake.pm_.c:533 ../../diskdrake_interactive.pm_.c:487
msgid "Which filesystem do you want?"
msgstr "Hvilket filsystem �nsker du at bruge?"

#: ../../diskdrake.pm_.c:564
msgid "Scanning available nfs shared resource"
msgstr "Tjekker tilg�ngelige delte nfs-ressurser"

#: ../../diskdrake.pm_.c:569
#, c-format
msgid "Scanning available nfs shared resource of server %s"
msgstr "Tjekker tilg�ngelige delte nfs-ressurser p� serveren %s"

#: ../../diskdrake.pm_.c:578 ../../diskdrake.pm_.c:648
msgid "If the list above doesn't contain the wanted entry, enter it here:"
msgstr ""
"Hvis listen ovenover ikke indeholder den �nskede indgang, indtast den her:"

#: ../../diskdrake.pm_.c:581 ../../diskdrake.pm_.c:651
msgid "Server"
msgstr "Server"

#: ../../diskdrake.pm_.c:582 ../../diskdrake.pm_.c:652
msgid "Shared resource"
msgstr "Delt resurse"

#: ../../diskdrake.pm_.c:615
msgid "Scanning available samba shared resource"
msgstr "Tjekker tilg�ngelige delte samba-ressurser"

#: ../../diskdrake.pm_.c:626 ../../diskdrake.pm_.c:639
#, c-format
msgid "Scanning available samba shared resource of server %s"
msgstr "Tjekker tilg�ngelige delte samba-ressurser p� serveren %s"

#: ../../diskdrake_interactive.pm_.c:163
msgid "Choose a partition"
msgstr "V�lg en partition"

#: ../../diskdrake_interactive.pm_.c:163
msgid "Choose another partition"
msgstr "V�lg en ny partition"

#: ../../diskdrake_interactive.pm_.c:188
msgid "Exit"
msgstr "Afslut"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to expert mode"
msgstr "Normal -> Ekspert"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Toggle to normal mode"
msgstr "Ekspert -> Normal"

#: ../../diskdrake_interactive.pm_.c:210
msgid "Undo"
msgstr "Fortryd"

#: ../../diskdrake_interactive.pm_.c:229
msgid "Continue anyway?"
msgstr "Forts�t alligevel?"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without saving"
msgstr "Afslut uden at gemme"

#: ../../diskdrake_interactive.pm_.c:234
msgid "Quit without writing the partition table?"
msgstr "Afslut uden at skrive partitionstabellen?"

#: ../../diskdrake_interactive.pm_.c:237
msgid "Do you want to save /etc/fstab modifications"
msgstr "�nsker du at gemme /etc/fstab-�ndringerne?"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Auto allocate"
msgstr "Allok�r automatisk"

#: ../../diskdrake_interactive.pm_.c:247
msgid "Clear all"
msgstr "Slet alt"

#: ../../diskdrake_interactive.pm_.c:247
#: ../../install_steps_interactive.pm_.c:171
msgid "More"
msgstr "Mere"

#: ../../diskdrake_interactive.pm_.c:250
msgid "Hard drive information"
msgstr "Drev-information"

#: ../../diskdrake_interactive.pm_.c:267
msgid "Not enough space for auto-allocating"
msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"

#: ../../diskdrake_interactive.pm_.c:273
msgid "All primary partitions are used"
msgstr "Alle prim�re partitioner er brugt"

#: ../../diskdrake_interactive.pm_.c:274
msgid "I can't add any more partition"
msgstr "Kan ikke tilf�je flere partitioner"

#: ../../diskdrake_interactive.pm_.c:275
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"For at du kan f� flere partitioner, skal du slette �n, s� der kan oprettes "
"en udvidet partition"

#: ../../diskdrake_interactive.pm_.c:285
msgid "Save partition table"
msgstr "Gem partitionstabel"

#: ../../diskdrake_interactive.pm_.c:286
msgid "Restore partition table"
msgstr "Genskaber partitionstabel"

#: ../../diskdrake_interactive.pm_.c:287
msgid "Rescue partition table"
msgstr "Redder partitionstabel"

#: ../../diskdrake_interactive.pm_.c:289
msgid "Reload partition table"
msgstr "Genindl�s partitionstabel"

#: ../../diskdrake_interactive.pm_.c:293
msgid "Removable media automounting"
msgstr "Automontering af flytbare medier"

#: ../../diskdrake_interactive.pm_.c:301 ../../diskdrake_interactive.pm_.c:321
msgid "Select file"
msgstr "V�lg fil"

#: ../../diskdrake_interactive.pm_.c:308
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Kopien af partitionstabellen har ikke samme st�rrelse\n"
"Forts�t alligevel?"

#: ../../diskdrake_interactive.pm_.c:322
msgid "Warning"
msgstr "Advarsel"

#: ../../diskdrake_interactive.pm_.c:323
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Inds�t en diskette i diskettedrevet\n"
"Alle data p� disketten vil blive slettet"

#: ../../diskdrake_interactive.pm_.c:334
msgid "Trying to rescue partition table"
msgstr "Fors�ger at redde partitionstabellen"

#: ../../diskdrake_interactive.pm_.c:340
msgid "Detailed information"
msgstr "Detaljeret information"

#: ../../diskdrake_interactive.pm_.c:354 ../../diskdrake_interactive.pm_.c:590
msgid "Resize"
msgstr "St�rrelses�ndring"

#: ../../diskdrake_interactive.pm_.c:355 ../../diskdrake_interactive.pm_.c:630
msgid "Move"
msgstr "Flyt"

#: ../../diskdrake_interactive.pm_.c:356
msgid "Format"
msgstr "Format�r"

#: ../../diskdrake_interactive.pm_.c:358
msgid "Active"
msgstr "Aktiv"

#: ../../diskdrake_interactive.pm_.c:359
msgid "Add to RAID"
msgstr "Tilf�j til RAID"

#: ../../diskdrake_interactive.pm_.c:360
msgid "Add to LVM"
msgstr "Tilf�j til LVM"

#: ../../diskdrake_interactive.pm_.c:363
msgid "Remove from RAID"
msgstr "Fjern fra RAID"

#: ../../diskdrake_interactive.pm_.c:364
msgid "Remove from LVM"
msgstr "Fjern fra LVM"

#: ../../diskdrake_interactive.pm_.c:365
msgid "Modify RAID"
msgstr "�ndr RAID"

#: ../../diskdrake_interactive.pm_.c:366
msgid "Use for loopback"
msgstr "Loopback anvendelse"

#: ../../diskdrake_interactive.pm_.c:409
msgid "Create a new partition"
msgstr "Opret en ny partition"

#: ../../diskdrake_interactive.pm_.c:412
msgid "Start sector: "
msgstr "Startsektor: "

#: ../../diskdrake_interactive.pm_.c:414 ../../diskdrake_interactive.pm_.c:732
msgid "Size in MB: "
msgstr "St�rrelse i Mb: "

#: ../../diskdrake_interactive.pm_.c:415 ../../diskdrake_interactive.pm_.c:733
msgid "Filesystem type: "
msgstr "Filsystemstype: "

#: ../../diskdrake_interactive.pm_.c:416 ../../diskdrake_interactive.pm_.c:936
#: ../../diskdrake_interactive.pm_.c:1010
msgid "Mount point: "
msgstr "Monteringssti: "

#: ../../diskdrake_interactive.pm_.c:420
msgid "Preference: "
msgstr "Pr�ference: "

#: ../../diskdrake_interactive.pm_.c:462
msgid "Remove the loopback file?"
msgstr "Fjern loopback-filen?"

#: ../../diskdrake_interactive.pm_.c:486
msgid "Change partition type"
msgstr "Skift partitionstype"

#: ../../diskdrake_interactive.pm_.c:491
msgid "Switching from ext2 to ext3"
msgstr "Skifter fra ext2 til ext3"

#: ../../diskdrake_interactive.pm_.c:521
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Hvor �nsker du at montere loopback-fil %s?"

#: ../../diskdrake_interactive.pm_.c:528
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
"loopback.\n"
"Fjern loopback f�rst"

#: ../../diskdrake_interactive.pm_.c:549
msgid "Computing FAT filesystem bounds"
msgstr "Udregner FAT-filsystemets gr�nser"

#: ../../diskdrake_interactive.pm_.c:549 ../../diskdrake_interactive.pm_.c:605
#: ../../install_interactive.pm_.c:116
msgid "Resizing"
msgstr "�ndrer st�rrelsen"

#: ../../diskdrake_interactive.pm_.c:578
msgid "This partition is not resizeable"
msgstr "St�rrelsen p� denne partition kan ikke �ndres"

#: ../../diskdrake_interactive.pm_.c:583
msgid "All data on this partition should be backed-up"
msgstr "Det b�r laves en backup af alle data p� denne partition"

#: ../../diskdrake_interactive.pm_.c:585
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Efter �ndring af st�rrelsen af partition %s, vil alle data p� denne "
"partition g� tabt"

#: ../../diskdrake_interactive.pm_.c:590
msgid "Choose the new size"
msgstr "V�lg den nye st�rrelse"

#: ../../diskdrake_interactive.pm_.c:591
msgid "New size in MB: "
msgstr "Ny st�rrelse i Mb: "

#: ../../diskdrake_interactive.pm_.c:631
msgid "Which disk do you want to move it to?"
msgstr "Hvilken disk �nsker du at flytte den til?"

#: ../../diskdrake_interactive.pm_.c:632
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake_interactive.pm_.c:633
msgid "Which sector do you want to move it to?"
msgstr "Hvilken sektor �nsker du at flytte den til?"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving"
msgstr "Flytter"

#: ../../diskdrake_interactive.pm_.c:636
msgid "Moving partition..."
msgstr "Flytter partition..."

#: ../../diskdrake_interactive.pm_.c:657
msgid "Choose an existing RAID to add to"
msgstr "V�lg en eksisterende RAID som skal udvides"

#: ../../diskdrake_interactive.pm_.c:658 ../../diskdrake_interactive.pm_.c:676
msgid "new"
msgstr "ny"

#: ../../diskdrake_interactive.pm_.c:674
msgid "Choose an existing LVM to add to"
msgstr "V�lg en eksisterende LVM som skal udvides"

#: ../../diskdrake_interactive.pm_.c:679
msgid "LVM name?"
msgstr "LVM-navn?"

#: ../../diskdrake_interactive.pm_.c:718
msgid "This partition can't be used for loopback"
msgstr "Denne partition kan ikke bruges til loopback"

#: ../../diskdrake_interactive.pm_.c:730
msgid "Loopback"
msgstr "Loopback"

#: ../../diskdrake_interactive.pm_.c:731
msgid "Loopback file name: "
msgstr "Loopback-filnavn: "

#: ../../diskdrake_interactive.pm_.c:736
msgid "Give a file name"
msgstr "Giv et filnavn"

#: ../../diskdrake_interactive.pm_.c:739
msgid "File already used by another loopback, choose another one"
msgstr "Filen er allerede brugt af en anden loopback, v�lg en anden fil"

#: ../../diskdrake_interactive.pm_.c:740
msgid "File already exists. Use it?"
msgstr "Filen findes allerede. Skal den bruges?"

#: ../../diskdrake_interactive.pm_.c:784
msgid "device"
msgstr "enhed"

#: ../../diskdrake_interactive.pm_.c:785
msgid "level"
msgstr "niveau"

#: ../../diskdrake_interactive.pm_.c:786
msgid "chunk size"
msgstr "enhedsst�rrelse"

#: ../../diskdrake_interactive.pm_.c:801
msgid "Be careful: this operation is dangerous."
msgstr "V�r forsigtig: denne operation er farlig."

#: ../../diskdrake_interactive.pm_.c:816
msgid "What type of partitioning?"
msgstr "Hvilken slags partitionering?"

#: ../../diskdrake_interactive.pm_.c:834
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Jeg kan desv�rre ikke p� nuv�rende tidspunkt acceptere at oprette /boot p�\n"
"drevet (p� en cylinder > 1024).\n"
"Enten benytter du LILO, hvilket ikke vil fungere, eller du kan undlade at "
"benytte\n"
"LILO, hvilket vil betyde, at du ikke har brug for /boot"

#: ../../diskdrake_interactive.pm_.c:838
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"Den partition som du har valgt som rod-partition (/) er fysisk placeret ud\n"
"over cylinder nr. 1024 p� harddisken, og du har ikke lavet nogen /boot\n"
"partition. Hvis du �nsker at benytte LILO, skal du oprette en /boot "
"partition\n"
"indenfor 1024-cylinder gr�nsen."

#: ../../diskdrake_interactive.pm_.c:844
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"Du har valgt en programmeret RAID-partition som rod (/).\n"
"Ingen systemopstarter kan h�ndtere dette uden en /boot partition.\n"
"S� v�r omhyggelig med at tilf�je en /boot partition"

#: ../../diskdrake_interactive.pm_.c:864
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partitionstabellen for disk %s vil nu blive skr�vet p� disken!"

#: ../../diskdrake_interactive.pm_.c:868
msgid "You'll need to reboot before the modification can take place"
msgstr "Du skal genstarte maskinen for at aktivere �ndringerne"

#: ../../diskdrake_interactive.pm_.c:879
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Efter formatering af partitionen %s vil alle data p� denne partition g� tabt"

#: ../../diskdrake_interactive.pm_.c:881
msgid "Formatting"
msgstr "Formaterer"

#: ../../diskdrake_interactive.pm_.c:882
#, c-format
msgid "Formatting loopback file %s"
msgstr "Formaterer loopback-fil %s"

#: ../../diskdrake_interactive.pm_.c:883
#: ../../install_steps_interactive.pm_.c:419
#, c-format
msgid "Formatting partition %s"
msgstr "Formaterer partition %s"

#: ../../diskdrake_interactive.pm_.c:894
msgid "Hide files"
msgstr "Skjul filer"

#: ../../diskdrake_interactive.pm_.c:894
msgid "Move files to the new partition"
msgstr "Flyt filer til den nye partition"

#: ../../diskdrake_interactive.pm_.c:895
#, c-format
msgid ""
"Directory %s already contain some data\n"
"(%s)"
msgstr ""
"Katalog %s indeholder allerede nogen data\n"
"(%s)"

#: ../../diskdrake_interactive.pm_.c:906
msgid "Moving files to the new partition"
msgstr "Flytter filer til den nye partition"

#: ../../diskdrake_interactive.pm_.c:910
#, c-format
msgid "Copying %s"
msgstr "Kopierer %s"

#: ../../diskdrake_interactive.pm_.c:914
#, c-format
msgid "Removing %s"
msgstr "Fjerner %s"

#: ../../diskdrake_interactive.pm_.c:937 ../../diskdrake_interactive.pm_.c:996
msgid "Device: "
msgstr "Enhed: "

#: ../../diskdrake_interactive.pm_.c:938
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS-drevbogstav: %s (bare et g�t)\n"

#: ../../diskdrake_interactive.pm_.c:942 ../../diskdrake_interactive.pm_.c:950
#: ../../diskdrake_interactive.pm_.c:1014
msgid "Type: "
msgstr "Type: "

#: ../../diskdrake_interactive.pm_.c:946
msgid "Name: "
msgstr "Navn: "

#: ../../diskdrake_interactive.pm_.c:954
#, c-format
msgid "Start: sector %s\n"
msgstr "Start: sektor %s\n"

#: ../../diskdrake_interactive.pm_.c:955
#, c-format
msgid "Size: %s"
msgstr "St�rrelse: %s"

#: ../../diskdrake_interactive.pm_.c:957
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorer"

#: ../../diskdrake_interactive.pm_.c:959
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr "Cylinder %d til cylinder %d\n"

#: ../../diskdrake_interactive.pm_.c:960
msgid "Formatted\n"
msgstr "Formateret\n"

#: ../../diskdrake_interactive.pm_.c:961
msgid "Not formatted\n"
msgstr "Ikke formateret\n"

#: ../../diskdrake_interactive.pm_.c:962
msgid "Mounted\n"
msgstr "Monteret\n"

#: ../../diskdrake_interactive.pm_.c:963
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake_interactive.pm_.c:965
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Loopback-fil(er):\n"
"   %s\n"

#: ../../diskdrake_interactive.pm_.c:966
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partition som opstartes som standard\n"
"    (g�lder kun MS-DOS-opstart, ikke LILO)\n"

#: ../../diskdrake_interactive.pm_.c:968
#, c-format
msgid "Level %s\n"
msgstr "Niveau %s\n"

#: ../../diskdrake_interactive.pm_.c:969
#, c-format
msgid "Chunk size %s\n"
msgstr "Enhedsst�rrelse %s\n"

#: ../../diskdrake_interactive.pm_.c:970
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diske %s\n"

#: ../../diskdrake_interactive.pm_.c:972
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback-filnavn: %s"

#: ../../diskdrake_interactive.pm_.c:975
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Denne partition er nok\n"
"en driver-partition, du skal\n"
"sandsynligvis lade den v�re.\n"

#: ../../diskdrake_interactive.pm_.c:978
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Denne specielle Bootstrap-\n"
"partition er for at\n"
"dual-boote dit system.\n"

#: ../../diskdrake_interactive.pm_.c:997
#, c-format
msgid "Size: %s\n"
msgstr "St�rrelse: %s\n"

#: ../../diskdrake_interactive.pm_.c:998
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"

#: ../../diskdrake_interactive.pm_.c:999
msgid "Info: "
msgstr "Info: "

#: ../../diskdrake_interactive.pm_.c:1000
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diske %s\n"

#: ../../diskdrake_interactive.pm_.c:1001
#, c-format
msgid "Partition table type: %s\n"
msgstr "Partitionstabel-type: %s\n"

#: ../../diskdrake_interactive.pm_.c:1002
#, c-format
msgid "on bus %d id %d\n"
msgstr "p� bus %d id %d\n"

#: ../../diskdrake_interactive.pm_.c:1016
#, c-format
msgid "Options: %s"
msgstr "Valg: %s"

#: ../../fs.pm_.c:447 ../../fs.pm_.c:457 ../../fs.pm_.c:461 ../../fs.pm_.c:465
#: ../../fs.pm_.c:469 ../../fs.pm_.c:473
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering af %s mislykkedes"

#: ../../fs.pm_.c:506
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Ved ikke hvordan man formaterer %s som type %s"

#: ../../fs.pm_.c:568
msgid "mount failed"
msgstr "montering mislykkedes"

#: ../../fs.pm_.c:588
#, c-format
msgid "fsck failed with exit code %d or signal %d"
msgstr "fsck afsluttet med fejlkode %d eller signal %d"

#: ../../fs.pm_.c:597 ../../fs.pm_.c:603 ../../partition_table.pm_.c:560
msgid "mount failed: "
msgstr "montering mislykkedes: "

#: ../../fs.pm_.c:618 ../../partition_table.pm_.c:556
#, c-format
msgid "error unmounting %s: %s"
msgstr "fejl ved afmontering af %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "simpel"

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "server"

#: ../../fsedit.pm_.c:461
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Du kan ikke bruge JFS p� partitioner mindre end 16Mb"

#: ../../fsedit.pm_.c:462
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Du kan ikke bruge ReiserFS p� partitioner mindre end 32Mb"

#: ../../fsedit.pm_.c:471
msgid "Mount points must begin with a leading /"
msgstr "Monteringsstier skal begynde med /"

#: ../../fsedit.pm_.c:472
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Der findes allerede en partition med monterings-sti %s\n"

#: ../../fsedit.pm_.c:476
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"

#: ../../fsedit.pm_.c:478
msgid "This directory should remain within the root filesystem"
msgstr "Dette katalog b�r ligge p� rod-filsystemet"

#: ../../fsedit.pm_.c:480
msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
msgstr ""
"Du skal have et rigtigt filsystem (ext2, reiserfs) til dette "
"monteringspunkt\n"

#: ../../fsedit.pm_.c:596
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Fejl ved �bning af %s for skrivning: %s"

#: ../../fsedit.pm_.c:681
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Der er opst�et en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
"der kan oprettes nye filsystemer. Unders�g venligst din maskine for at finde "
"�rsagen til problemet"

#: ../../fsedit.pm_.c:704
msgid "You don't have any partitions!"
msgstr "Du har ikke nogen partitioner!"

#: ../../help.pm_.c:13
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log into the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as that of\n"
"\"root\" from a security point of view, but that is no reason to neglect it\n"
"- after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."
msgstr ""
"GNU/Linux er et flerbrugersystem, og dette betyder at hver bruger kan have\n"
"sine egne pr�ferencer, sine egne filer og s� videre. Du kan l�se\n"
"brugervejledningen for at l�re mere.\n"
"Men i mods�tning til root, som er administratoren, vil brugerne som du\n"
"tilf�jer her ikke have lov til at �ndre nogetsomhelst undtagen deres egne\n"
"filer og deres egen ops�tning. Du skal oprette i det mindste �n almindelig\n"
"bruger til dig selv.\n"
"Dette er den konto som du b�r bruge til almindelig brug. Selvom det er\n"
"meget praktisk at logge ind som root hver dag, kan det ogs� v�re meget "
"farligt!\n"
"Den mindste fejltagelse kan betyde at dit system ikke vil virke mere.\n"
"Hvis du laver en alvorlig fejltagelse som almindelig bruger, vil du kun\n"
"m�ske tabe nogen information, men ikke hele systemet.\n"
"\n"
"F�rst skal du indtaste dit rigtige navn. Dette er ikke kr�vet, selvf�lgelig\n"
"kan du faktisk skrive hvad du vil. DrakX vil s� tage det f�rste ord du "
"skrev\n"
"i boksen og og overf�re det som brugernavn. Dette er navnet, som denne "
"bruger\n"
"skal bruge for at logge ind p� systemet. Du kan �ndre dette. Du skal s�\n"
"indtaste en adgangskode h�r. Adgangskoden for en ikke-priviligeret (normal) "
"bruger\n"
"er ikke s� vigtigt som det for Root fra et sikkerhedsm�ssigt synspunkt,\n"
"men det er ingen grund til at negligere det alligevel - n�r det kommer\n"
"til stykket er dine filer der er i fare.\n"
"Hvis du klikker p� Accept�r bruger, kan du tilf�je s� mange som du �nsker.\n"
"Tilf�j en bruger for hver af dine venner: fx din far og din s�ster.\n"
"N�r du har tilf�jet alle de brugere du �nsker, v�lg da F�rdig.\n"
"\n"
"Klik p� Avanceret-knappen lader dig �ndre standard-skal for denne bruger\n"
"(bash er standard)."

#: ../../help.pm_.c:41
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installs. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Ovenfor er listet de eksisterende Linux-partitioner genkendt p� din disk.\n"
"Du kan beholde valgene gjort af guiden, de er velegnede til almindelig\n"
"brug.  Hvis du �ndrer disse valg skal du i det mindste definere en\n"
"rod-partition '/'. Lad v�re med at v�lge en for lille partition, ellers\n"
"vil du ikke kunne installere nok programmel. Hvis du �nsker at lagre data "
"p�\n"
"en separat partition, skal du ogs� v�lge en '/home' (kun muligt hvis du har\n"
"mere end �n Linux-partition).\n"
"\n"
"Hver partition er listet som f�lger: 'Navn', 'Kapacitet'.\n"
"\n"
"'Navn' er kodet som f�lger: 'drevtype', 'drevnummer', 'partitionsnummer'\n"
"(for eksempel '/hda1').\n"
"\n"
"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er\n"
"et SCSI drev.\n"
"\n"
"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
"\n"
"   * 'a' betyder 'hoved-drev p� den prim�re IDE controller',\n"
"\n"
"   * 'b' betyder 'slave-drev p� den prim�re IDE controller',\n"
"\n"
"   * 'c' betyder 'hoved-drev p� den s�kund�re IDE controller',\n"
"\n"
"   * 'd' betyder 'slave-drev p� den s�kund�re IDE controller'.\n"
"\n"
"For SCSI drev betyder 'a' det 'f�rste drev', 'b' betyder det 'andet drev', "
"osv."

#: ../../help.pm_.c:72
msgid ""
"The Mandrake Linux installation is spread out over several CDROMs. DrakX\n"
"knows if a selected package is located on another CDROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""
"Mandrake Linux installationen er fordelt p� flere cdrom-er. DrakX v�d om\n"
"en valgt pakker ligger p� en anden cdrom og vil udskyde den aktuelle cd og "
"bede dig om at inds�tte en anden, om n�dvendigt."

#: ../../help.pm_.c:77
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from CDROM, you will first be\n"
"asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation, "
"select\n"
"one or more of the corresponding groups.\n"
"\n"
" * \"Development\": if the machine is to be used for programming, choose "
"the\n"
"desired group(s).\n"
"\n"
" * \"Server\": finally, if the machine is intended to be a server, you will\n"
"be able to select which of the most common services you wish to see\n"
"installed on the machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Update\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"Det er nu tid til at angive hvilke pakker du vil installere p� dit system.\n"
"Der er tusinder af pakker til dit Mandrake Linux system, og det forventes "
"ikke\n"
"at du kender dem allesammen udenad.\n"
"\n"
"Hvis du udf�rer en standard-installation fra cdrom vil du f�rst blive\n"
"bedt om at angive de cd-er som du har nu. Tjek boksene svarende til de\n"
"cd-er du har liggende for installationen. Klik O.k. n�r du er klar\n"
"til at forts�tte.\n"
"\n"
"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
"maskine. Grupperne er selv ordnet i 4 grupper:\n"
"\n"
" * Arbejdsstation: Hvis din maskine skal bruges som en arbejdsstation, v�lg\n"
"da en eller flere af de tilsvarende grupper.\n"
"\n"
" * Grafisk milj�: V�lg her dit foretrukne grafiske milj�. V�lg mindst �t,\n"
"hvis d� �nsker at have en grafisk arbejdsstation!\n"
"\n"
" * Udvikling: hvis maskinen skal bruges til programmering v�lg da de "
"�nskede\n"
"grupper.\n"
"\n"
" * Server: Endelig, hvis maskinen er beregnet til at v�re en server, er du "
"her i\n"
"stand til at v�lge de mest almindelige tjenester, som du �nsker at se "
"installeret \n"
"p� maskinen.\n"
"\n"
"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om\n"
"denne gruppe.\n"
"\n"
"Et klik p� Avanceret-knappen vil lade dig v�lge muligheden Individuelt "
"pakkevalg.\n"
"Dette er nyttigt, hvis du kender de tilbudte pakker godt, eller hvis du "
"�nsker\n"
"at have fuld kontrol over hvad der skal installeres.\n"
"\n"
"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du frav�lge "
"alle\n"
"grupper for at undg� at installere nogen nye pakker, og bare reparere eller\n"
"opdatere det eksisterende system."

#: ../../help.pm_.c:115
msgid ""
"Finally, depending on your choice of whether or not to select individual\n"
"packages, you will be presented a tree containing all packages classified\n"
"by groups and subgroups. While browsing the tree, you can select entire\n"
"groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. A time to complete estimate is displayed\n"
"on the screen to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected either intentionally or because it\n"
"was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disc icon at the bottom of the list allows to load the\n"
"packages list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."
msgstr ""
"Endelig, afh�ngigt af om du valgte at udv�lge individuelle pakker eller ej,\n"
"vil du blive pr�senteret for et tr� med alle pakker opdelt i grupper og\n"
"undergrupper. Under gennembladring af tr�et kan du udv�lge hele grupper,\n"
"undergrupper eller bare pakker.\n"
"\n"
"Hver gang du udv�lger en pakke i tr�et vil en beskrivelse fremkomme til "
"h�jre.\n"
"N�r du har afsluttet dine udv�lgelser, s� klik p� Install�r-knappen. S� "
"begynder\n"
"selve installationen. Afh�ngig af din maskines hurtighed og antal pakker\n"
"som skal installeres kan det tage et stykke tid at g�re processen f�rdig.\n"
"Et sk�n p� tiden det tager for f�rdigg�relse vises p� sk�rmen, s� du kan se\n"
"om der skulle v�re tid til at nyde en kop kaffe.\n"
"\n"
"I tilf�ldet af at en server-pakke er blevet valgt enten med vilje, eller\n"
"fordi den var en del af en hel gruppe, vil du blive spurgt om du virkelig\n"
"�nsker at installere disse servere. Under Linux Mandrake bliver "
"installerede\n"
"servere startet op ved opstart af maskinen. Selvom de er sikre og ikke har\n"
"nogen kendte problemer p� udgivelsestidspunktet for distributionen, er det\n"
"muligt at sikkerhedshuller opdages efter at denne version af Mandrake\n"
"Linux blev f�rdiggjort. Specielt hvis du ikke v�d hvad det er for noget,\n"
"s� klik Nej her. Et klik med Ja her vil installere de n�vnte servere\n"
"og de vil som standard blive startet automatisk!\n"
"\n"
"Automatiske afh�ngigheder-valget deaktiverer simpelthen advarselsdialogen,\n"
"som vises hver gang installeringsprogrammet automatisk v�lger en pakke.\n"
"Dette sker fordi det er blevet beregnet at den er kr�vet for at\n"
"tilfredsstille en afh�ngighed fra en anden pakke for at kunne f�rdigg�re\n"
"en vellykket installation.\n"
"\n"
"Det klejne disketteikon i bunden af listen muligg�r indl�sning af en\n"
"pakkeliste udvalgt ved en tidligere installation. Klik p� denne ikon\n"
"vil bede dig om at inds�tte en diskette tidligere frembragt ved slutningen\n"
"p� en anden installation. Se r�d nr to i det sidste trin for hvordan\n"
"en s�dan diskette kan laves."

#: ../../help.pm_.c:151
msgid ""
"If you wish to connect your computer to the Internet or to a local network,\n"
"please choose the correct option. Please turn on your device before\n"
"choosing the correct option to let DrakX detect it automatically.\n"
"\n"
"Mandrake Linux proposes the configuration of an Internet connection at\n"
"installation time. Available connections are: traditional modem, ISDN\n"
"modem, ADSL connection, cable modem, and finally a simple LAN connection\n"
"(Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the manual chapter about Internet connections for details\n"
"about the configuration, or simply wait until your system is installed and\n"
"use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation or if you\n"
"have finished configuring your network connection, click \"Cancel\"."
msgstr ""
"Hvis du vil forbinde din maskine til internettet eller til et lokalnetv�rk\n"
"s� v�lg venligst den rigtige mulighed. T�nd venligst for din enhed f�r\n"
"valg af den rigtige mulighed for at lade DrakX opdage enheden automatisk.\n"
"\n"
"Mandrake Linux tilbyder dig at ops�tte din internetforbindelse p�\n"
"installeringstidspunktet. Mulige forbindelser er: almindeligt modem, ISDN-"
"modem,\n"
"ADSL-forbindelse, kabel-modem, og endelig en simpel LAN-forbindelse "
"(Ethernet).\n"
"\n"
"Vi vil ikke her g� i detaljer med hver konfiguration. Men forsikr dig om,\n"
"at du har alle parametrene fra din internetudbyder eller "
"systemadministrator.\n"
"\n"
"Du kan l�se i kapitlet i h�ndbogen omkring internetforbindelser om detaljer\n"
"omkring konfigureringen, eller simpelthen vente til dit system er "
"installeret\n"
"og s� bruge programmet beskrevet d�r til at konfigurere din forbindelse.\n"
"\n"
"Hvis du vil konfigurere netv�rket senere efter installationen, eller hvis "
"du\n"
"har afsluttet konfigureringen af din netv�rksforbindelse, v�lg da 'F�rdig'."

#: ../../help.pm_.c:172
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need."
msgstr ""
"Du kan nu v�lge hvilke tjenester du �nsker skal startes ved opstart af "
"maskinen.\n"
"\n"
"Her pr�senteres alle de tjenester, som er med i den aktuelle installation.\n"
"Gennemse dem omhyggeligt og v�lg dem fra som ikke altid er n�dvendige ved "
"opstarten.\n"
"\n"
"Du kan f� en kort forklarende tekst om en tjeneste ved at v�lge en bestemt "
"tjeneste.\n"
"Hvis du ikke er sikker p� om en tjeneste er nyttig eller ej, er det dog "
"sikrere at bruge den foresl�ede opf�rsel.\n"
"\n"
"V�r specielt varsom p� dette trin hvis du planl�gger at bruge maskinen som\n"
"server: du vil formentlig �nske ikke at starte nogensomhelst tjeneste\n"
"op som du ikke har brug for. Husk venligst at adskillige tjenester kan v�re\n"
"farlige hvis de er aktiveret p� en server.\n"
"V�lg som hovedregel kun de tjenester som du virkelig beh�ver."

#: ../../help.pm_.c:188
msgid ""
"GNU/Linux manages time in GMT (Greenwich Manage Time) and translates it in\n"
"local time according to the time zone you selected."
msgstr ""
"GNU/Linux administrerer tid i GMT (Greenwich Mean Time) og overs�tter det\n"
"til lokaltid svarende til den tidszone du har valgt."

#: ../../help.pm_.c:192
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphics environments (KDE, Gnome, AfterStep,\n"
"WindowMaker...) bundled with Mandrake Linux rely. In this section, DrakX\n"
"will try to configure X automatically.\n"
"\n"
"It is extremely rare for it to fail, unless the hardware is very old (or\n"
"very new). If it succeeds, it will start X automatically with the best\n"
"resolution possible depending on the size of the monitor. A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" install, you will enter the X configuration\n"
"wizard. See the corresponding section of the manual for more information\n"
"about this wizard.\n"
"\n"
"If you can see the message and answer \"Yes\", then DrakX will proceed to\n"
"the next step. If you cannot see the message, it simply means that the\n"
"configuration was wrong and the test will automatically end after 10\n"
"seconds, restoring the screen."
msgstr ""
"X (for X-vinduessystem) er hjertet af GNU/Linux' grafiske gr�nseflade,\n"
"hvilet alle de grafiske milj�er (KDE, Gnome, AfterStep, WindowMaker)...),\n"
"som kommer med Mandrake Linux, bygger p�. I dette afsnit vil drakX fors�ge\n"
"at konfigurere X automatisk.\n"
"\n"
"Det er meget sj�ldent at dette mislykkes for drakX, med mindre maskinellet\n"
"er meget gammelt (eller meget nyt). Hvis det lykkes, vil drakX starte X\n"
"automatisk med den bedst mulige opl�sning afh�ngig af sk�rmens st�rrelse.\n"
"Et vindue vil s� komme frem og sp�rge om du kan se det.\n"
"\n"
"Hvis du laver en ekspert-installering, vil du komme ind i X-konfigurerings-\n"
"guiden. Se det tilh�rende afsnit af manualen for yderligere oplysning om\n"
"denne guide.\n"
"\n"
"Hvis du kan se beskeden, og svarer Ja, s� vil drakX forts�tte til det n�ste\n"
"trin. Hvis du ikke kan se beskeden, betyder det simpelthen at "
"konfigurationen\n"
"var forkert, og testen vil automatisk afsluttes efter 10 sekunder, og \n"
"genfremvise sk�rmen."

#: ../../help.pm_.c:212
msgid ""
"The first time you try the X configuration, you may not be very satisfied\n"
"with its display (screen is too small, shifted left or right...). Hence,\n"
"even if X starts up correctly, DrakX then asks you if the configuration\n"
"suits you. It will also propose to change it by displaying a list of valid\n"
"modes it could find, asking you to select one.\n"
"\n"
"As a last resort, if you still cannot get X to work, choose \"Change\n"
"graphics card\", select \"Unlisted card\", and when prompted on which\n"
"server you want, choose \"FBDev\". This is a failsafe option which works\n"
"with any modern graphics card. Then choose \"Test again\" to be sure."
msgstr ""
"M�ske er du ikke s�rligt tilfreds med det f�rste fors�g med X konfigurering\n"
"(sk�rmen for lille, flyttet til venstre eller h�jre...). Derfor vil drakX\n"
"sp�rge dig om konfigurationen passer dig, selvom X starter op korrekt.\n"
"DrakX vil ogs� foresl� �ndringer ved at vise en liste af gyldige tilstande\n"
"som den kunne finde, og s� bede dig om at v�lge �n.\n"
"\n"
"Som en sidste udvej, hvis du stadig ikke kan f� X til at virke, v�lg da\n"
"�ndr grafikkort, v�lg Ukendt kort, og n�r du bliver spurgt om hvilken\n"
"server du vil have, v�lg da FBDev. Dette er en fejlsikker mulighed som\n"
"virker med alle moderne grafikkort. V�lg derefter Test igen for at v�re "
"sikker."

#: ../../help.pm_.c:224
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""
"Til sidst vil du blive spurgt om du �nsker at se den grafiske gr�nseflade\n"
"ved opstart. Bem�rk at du vil blive spurgt om dette selvom du har valgt\n"
"ikke at afpr�ve konfigurationen. Selvf�lgelig vil du �nske at svare Nej,\n"
"hvis din maskine skal bruges som server, eller hvis ikke lykkedes dig at\n"
"f� sk�rmen konfigureret."

#: ../../help.pm_.c:231
msgid ""
"The Mandrake Linux CDROM has a built-in rescue mode. You can access it by\n"
"booting from the CDROM, press the >>F1<< key at boot and type >>rescue<< at\n"
"the prompt. But in case your computer cannot boot from the CDROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the boot loader, DrakX will rewrite the boot sector "
"(MBR)\n"
"of your main disk (unless you are using another boot manager) so that you\n"
"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard "
"disk,\n"
"this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."
msgstr ""
"Mandrake Linux-cdrommen har en indbygget rednings-tilstand. Du kan f� fat\n"
"i denne ved at starte op fra cdrommen, trykke 'F1'-tasten ved opstart, og\n"
"indtaste 'rescue' ved opstartsledeteksten. Men i tilf�lde af at din maskine\n"
"ikke kan starte op fra cdrommen, b�r du komme tilbage til dette trin for\n"
"hj�lp i mindst to situationer:\n"
"\n"
" * ved installering af opstartsindl�seren vil drakX genskrive "
"opstartssektoren\n"
"(MBR) p� din hoveddisk (medmindre du bruger en anden opstartsh�ndterer) s�\n"
"du kan starte enten Windows eller GNU/Linux (forudsat du har Windows p� dit\n"
"system). Hvis du har brug for at geninstallere Windows, vil Microsoft\n"
"installeringsprocessen overskrive opstartssektoren, og s� vil du ikke v�re "
"i\n"
"stand til at starte GNU/Linux!\n"
"\n"
" * Hvis der opst�r et problem, og du ikke kan starte GNU/Linux op fra "
"harddisken,\n"
"vil denne diskette v�re den eneste m�de at starte GNU/Linux op p�. Den "
"indeholder\n"
"et p�nt antal systemv�rkt�jer for at genetablere et system som er g�et ned\n"
"pga. str�msvigt, en uheldig tastefejl, en skrivefejl i en adgangskode, "
"eller\n"
"nogen anden �rsag.\n"
"\n"
"N�r du klikker p� dette trin, vil du blive bedt om at inds�tte en diskette "
"i\n"
"drevet. Disketten du inds�tter skal v�re tom eller kun indeholde data som\n"
"du ikke har brug for. Du beh�ver ikke formatere den; drakX vil overskrive\n"
"hele disketten."

#: ../../help.pm_.c:255
msgid ""
"At this point you need to choose where on your hard drive to install your\n"
"Mandrake Linux operating system. If your hard drive is empty or if an\n"
"existing operating system is using all the space available, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the effects of the partitioning process are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the install in Expert mode, you will enter DiskDrake,\n"
"the Mandrake Linux partitioning tool, which allows you to fine-tune your\n"
"partitions. See the DiskDrake chapter of the manual. From the installation\n"
"interface, you can use the wizards as described here by clicking the\n"
"\"Wizard\" button of the dialog.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do that, you can delete your\n"
"Microsoft Windows partition and data (see \"Erase entire disk\" or \"Expert\n"
"mode\" solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data. This solution is recommended if\n"
"you want to use both Mandrake Linux and Microsoft Windows on same computer.\n"
"\n"
"   Before choosing this option, please understand that after this "
"procedure,\n"
"the size of your Microsoft Windows partition will be smaller than at the\n"
"present time. You will have less free space under Microsoft Windows to\n"
"store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after confirmation.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."
msgstr ""
"Nu skal du v�lge hvor du vil installere dit\n"
"Mandrake Linux-operativsystem p� din harddisk. Hvis disken er tom eller\n"
"et eksisterende operativsystem bruger alt pladsen p� den, bliver du n�dt\n"
"til at partitionere den. N�r disken partitioneres, deles den i logiske\n"
"dele for at g�re plads til dit nye Mandrake Linux-system.\n"
"\n"
"Da en partitionering normalt ikke kan fortrydes kan det godt v�re \n"
"frustrerende og stressende for nybegyndere. Heldigvis er der en guide\n"
"som forenkler denne proces. F�r du begynder se da i manualen\n"
"og tag den tid du skal bruge.\n"
"\n"
"Hvis du k�rer installeringen i ekspert-tilstand kommer du ind i Mandrake\n"
"Linux' partitioneringsv�rkt�j, DiskDrake. Dette vil lade dig finindstille\n"
"dine partitioner. Se kapitlet om DiskDrake i manualen.\n"
"Fra installations-gr�nsefladen kan du bruge de guider som beskrevet her\n"
"ved at klikke knappen Guider p� gr�nsefladen.\n"
"\n"
"Hvis partitionerne allerede er definerede (fra en tidlige installation eller "
"fra et andet partitions-v�rkt�j), skal du bare v�lge dem for at installere\n"
"dit Linux system\n"
"\n"
"Hvis partitionerne ikke er lavet endnu, bliver du n�dt til at oprette dem\n"
"ved brug af guiden. Afh�ngig af din disks konfiguration er flere\n"
"muligheder tilstede:\n"
"\n"
" * Brug fri plads: Dette vil simpelthen f�re til en automatisk opdeling af "
"dine blanke drev; du beh�ver ikke at bekymre dig yderligere.\n"
"\n"
" * Brug eksisterende partition: guiden har fundet en eller flere Linux-"
"partitioner p� din harddisk. Hvis du vil beholde dem, v�lg denne mulighed.\n"
"\n"
" * Brug den fri plads p� Windows-partitionen: hvis Microsoft Windows er "
"installeret p� din disk og bruger al pladsen, bliver du n�dt til at\n"
"lave plads til Linux. For at g�re det kan du slette dine\n"
"Microsoft Windows partitioner og data (se \"Slet hele disken\" eller\n"
"\"Ekspert niveau\" ) eller �ndre st�rrelsen p�\n"
"din Microsoft Windows-partition. St�rrelses�ndringen kan fortages uden tab\n"
"af data. Denne l�sning er anbefalet hvis du vil bruge b�de Mandrake Linux\n"
"og Microsoft Windows p� samme maskine.\n"
"\n"
"  F�r du v�lger denne l�sning, b�r du forst� at st�rrelsen p� din Microsoft\n"
"Windows partition vil blive mindre. Det betyder at du vil have mindre fri "
"plads under\n"
"Microsoft Windows til at gemme din data eller installere programmel.\n"
"\n"
" * Slet hele disken: hvis du vil slette alle data p� alle partitioner p� "
"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du\n"
"v�lge denne mulighed. V�r forsigtig med denne l�sning, du vil ikke\n"
"v�re i stand til at fortryde dine �ndringer.\n"
"\n"
"   !! Hvis du bruger denne mulighed vil alle data p� din disk g� tabt. !!\n"
"\n"
" * Fjern Windows: dette vil simpelthen slette alt p� disken og begynde fra\n"
"en frisk, og partitionere fra ny. Al data p� din disk blive tabt.\n"
"\n"
"   !! Hvis du bruger denne mulighed vil alle data p� din disk g� tabt. !!\n"
"\n"
" * Ekspert-modus: hvis du vil partitionere disken manuelt, kan du v�lge "
"dette alternativ. V�r forsigtig f�r du\n"
"v�lger denne l�sning. Den giver dig mange muligheder, men er ogs� farlig. \n"
"Du kan nemt komme til at slette alle dine data. S�\n"
"lad v�re med at v�lge den l�sning med mindre du v�d hvad du g�r."

#: ../../help.pm_.c:319
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated install as the partitioning\n"
"step (and only this one) remains interactive.\n"
"\n"
"    * \"Automated\". Fully automated install: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section at our web site.\n"
"\n"
" * \"Save packages selection\"(*): saves the packages selection as made\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the driver and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"V�rsgo'. Installationen en nu f�rdig og dit GNU/Linux-system er nu klar\n"
"til brug. Klik bare O.k. for at genstarte systemet. Du kan starte GNU/Linux\n"
"eller Windows, som du foretr�kker det (hvis du har to systemer), s� snart\n"
"din maskine er startet op igen.\n"
"\n"
"Avanceret-knappen viser to ekstra knapper for at:\n"
"\n"
" * generere en auto-installeringsdiskette: for at oprette en installerings-\n"
"diskette som automatisk vil udf�re en hel installation uden hj�lp fra en\n"
"operat�r, magen til den installation du lige har konfigureret.\n"
"\n"
"   Bem�rk at to forskellige muligheder er tilstede efter klik p� knappen:\n"
"\n"
"   * Genafspil: Dette er en delvist automatiseret installering da \n"
"partitioneringstrinnet (og kun dette trin) forbliver interaktiv.\n"
"\n"
"   * Automatisk: Fuldautomatisk installering: harddisken bliver fuldst�ndig\n"
"genoverskrevet, alle data forsvinder.\n"
"\n"
"   Denne facilitet er meget nyttig ved installering af et stort antal\n"
"ens maskiner. Se afsnittet om autoinstallering p� vores websted.\n"
"\n"
" * Gem pakkevalg(*): Gemmer pakkevalget som lavet tidligere.\n"
"S� n�r en ny installering laves, kan disketten inds�ttes i drevet og\n"
"installeringen kan k�res ved at bruge F1 p� hj�lpesk�rmen idet der\n"
"indtastes >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) Du skal have en diskette formateret til FAT (denne oprettes i\n"
"GNU/Linux ved at skive \"mformat a:\")"

#: ../../help.pm_.c:350
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of them.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disc."
msgstr ""
"Enhver partition der netop er blevet defineret, skal formateres til brug\n"
"(formatering betyder oprettelse af et filsystem).\n"
"\n"
"Nu kan du ogs� �nske at omformatere nogle allerede eksisterende partitioner\n"
"for at slette de data som de indeholder. Hvis du �nsker dette, s� v�lg\n"
"venligst ogs� de partitioner som du �nsker at formatere.\n"
"\n"
"Bem�rk venligst at det ikke er n�dvendigt at omformatere alle allerede\n"
"eksisterende partitioner. Det er n�dvendigt at omformatere de partitioner,\n"
"der indeholder operativsystemet (s�som '/', '/usr' og '/var', men du er\n"
"ikke n�dt til at omformatere partitioner som du �nsker at beholde\n"
"(typisk /home).\n"
"\n"
"V�r venligst forsigtig med valg af partitioner; efter formatering vil\n"
"alle data v�re slettede p� de valgte partitioner, og du vil ikke\n"
"kunne redde nogetsomhelst af det.\n"
"\n"
"Klik p� 'Ok' n�r du er klar til at formatere partitioner.\n"
"\n"
"Klik p� 'Annull�r' hvis du �nsker at v�lge andre partitioner til at\n"
"installere dit nye Mandrake Linux operativsystem.\n"
"\n"
"Klik p� 'Avanceret' for at v�lge partitioner som du �nsker at tjekke for\n"
"d�rlige blokke."

#: ../../help.pm_.c:376
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""
"Dit nye Mandrake Linux styresystem er i f�rd med at blive installeret.\n"
"Afh�ngig af det antal pakker, du installerer og hastigheden p� din\n"
"maskine kan dette tage fra nogen f� minutter til en del l�ngere tid.\n"
"\n"
"Hav venligst t�lmodighed."

#: ../../help.pm_.c:384
msgid ""
"Before continuing you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click the\n"
"\"Accept\" button."
msgstr ""
"F�r du g�r videre b�r du l�se betingelserne i licensen omhyggeligt. \n"
"Den omfatter hele Mandrake Linux distributionen, og hvis du ikke er \n"
"enig i alle betingelserne i den, s� klik p� 'N�gt'-knappen. Det vil \n"
"�jeblikkeligt afslutte installationen. For at forts�tte installationen \n"
"skal du klikke p� 'Accept�r'-knappen."

#: ../../help.pm_.c:391
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expenses of\n"
"easiness of use. Refer to the MSEC chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"Nu er det tid til at v�lge det �nskede sikkerhedsniveau for maskinen.\n"
"Hovedreglen er at jo mere kendt maskinen er, og jo vigtigere data er, \n"
"des h�jere b�r sikkerhedsniveauet v�re. Men et h�jere sikkerhedsniveau "
"vindes \n"
"normalt p� bekostning af letheden af anvendelsen. Kig i kapitlet MSEC i \n"
"referenceh�ndbogen for mere information om betydningen af niveauerne.\n"
"\n"
"Hvis du ikke v�d hvad du skal v�lge, s� behold den foresl�ede mulighed."

#: ../../help.pm_.c:401
msgid ""
"At this point, you need to choose what partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have been already\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive.\n"
"\n"
" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
"and swap partitions in free space of your hard drive.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Reload\": you can use this option if you wish to undo all changes and\n"
"load your initial partitions table.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition "
"your\n"
"hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning.\n"
"\n"
" * \"Restore from floppy\": this option will allow you to restore a\n"
"previously saved partition table from floppy disk.\n"
"\n"
" * \"Save to floppy\": saves the partition table to a floppy. Useful for\n"
"later partition-table recovery if necessary. It is strongly recommended to\n"
"perform this step.\n"
"\n"
" * \"Done\": when you have finished partitioning your hard drive, this will\n"
"save your changes back to disc.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Nu skal du v�lge hvor Mandrake Linux skal installeres. Hvis partitionerne\n"
"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
"fra\n"
"et andet partitioneringsv�rkt�j), kan du bruge dem. Ellers skal "
"partitionerne\n"
"laves f�rst.\n"
"\n"
"For at lave partitioner, skal du f�rst v�lge en harddisk. Du kan v�lge\n"
"disken der skal partitioneres ved at trykke p� \"hda\" for den f�rste IDE\n"
"disk, \"hdb\" for den anden eller \"sda\" for den f�rste SCSI disk og s� "
"videre.\n"
"\n"
"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
"\n"
"   * Slet alt: Dette valg sletter alle partitioner p� den valgte disk.\n"
"\n"
"  * Allok�r automatisk: dette valg tillader dig automatisk at lave Ext2 og\n"
"swappartitioner p� den fri plads p� din disk.\n"
"\n"
"  * Red partitionstabel: hvis din partitionstabel er beskadiget, kan du\n"
"pr�ve at redde den med denne mulighed. V�r venligst forsigtig og husk\n"
"at det kan sl� fejl.\n"
"\n"
" * Fortryd: Du kan bruge denne mulighed for at annullere dine �ndringer.\n"
"\n"
" * Genindl�s: Du kan bruge denne mulighed hvis du �nsker at fortryde alle\n"
"�ndringer og genindl�se din oprindelige partitionstabel\n"
"\n"
" * Guide: Hvis du �nsker at bruge guiden til at partitionere din disk, kan\n"
"du bruge denne mulighed. Dette anbefales, hvis du ikke har det store\n"
"kendskab til partitionering.\n"
"\n"
" * Genskab fra diskette: Denne mulighed tillader dig at\n"
"genskabe en tidligere gemt partitionstabel fra diskette.\n"
"\n"
" * Gem p� diskette: Gemmer din partitionstabel p� en diskette.\n"
"Nyttigt bed senere redning af partitionstabellen, om n�dvendigt.\n"
"Det er st�rkt anbefalet at bruge dette trin.\n"
"\n"
" * F�rdig: n�r du er f�rdig med partitionering af din disk, s� tryk p�\n"
"\"F�rdig\", dette vil skrive �ndringerne tilbage p� disken.\n"
"\n"
"Bem�rk: du kan n� alle mulighederne ved at bruge tastaturet: navig�r\n"
"gennem partitionerne med Tab og op- og ned-pilene.\n"
"\n"
"N�r en partition er valgt kan du bruge:\n"
"\n"
" * Ctrl-c for at lave en ny partition (N�r en tom partition er valgt);\n"
"\n"
" * Ctrl-d for at slette en partition;\n"
"\n"
" * Ctrl-m for at s�tte et monteringssti.\n"
"\n"
"Hvis du er i gang med at installere p� en PPC-maskine skal du lave en lille "
"HFS-'bootstrap'-partition p� mindst 1MB til \n"
"Yaboot-systemstarteren. Hvis du v�lger at lave partitionen en smule st�rre, "
"f.eks 50MB kan den v�re nyttig til at gemme\n"
"en ekstra kerne og ramdisk-billede for n�dsituationer ved opstart."

#: ../../help.pm_.c:460
msgid ""
"More than one Microsoft Windows partition has been detected on your hard\n"
"drive. Please choose the one you want resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\",\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\",\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\",\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Mere end �n Microsoft Windows partition er blevet genkendt p� dit diskdrev.\n"
"V�lg venligst den som du �nsker at �ndre st�rrelse p� for at kunne\n"
"installere dit nye Mandrake Linux operativsystem.\n"
"\n"
"Hver partition er listet som f�lger: 'Linux navn', 'Windows navn',\n"
"'Kapacitet'.\n"
"\n"
"'Linux navn' er kodet som f�lger: 'drevtype', 'drevnummer',\n"
"'partitionsnummer' (for eksempel '/hda1').\n"
"\n"
"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er\n"
"et SCSI drev.\n"
"\n"
"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
"\n"
"   * 'a' betyder 'hoved-drev p� den prim�re IDE controller',\n"
"\n"
"   * 'b' betyder 'slave-drev p� den prim�re IDE controller',\n"
"\n"
"   * 'c' betyder 'hoved-drev p� den s�kund�re IDE controller',\n"
"\n"
"   * 'd' betyder 'slave-drev p� den s�kund�re IDE controller'.\n"
"\n"
"For SCSI drev betyder 'a' det 'f�rste drev', 'b' betyder det 'andet drev', "
"osv.\n"
"\n"
"'Windows navn' er det bogstav som dit drev har under Windows (den f�rste\n"
"disk eller partition kaldes 'C:')."

#: ../../help.pm_.c:491
msgid "Please be patient. This operation can take several minutes."
msgstr "Hav venligst t�lmodighed. Denne handling kan tage adskillige minutter."

#: ../../help.pm_.c:494
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\"). You also\n"
"have the choice of performing a new install or an upgrade of an existing\n"
"Mandrake Linux system. Clicking \"Install\" will completely wipe out the\n"
"old system. Select \"Upgrade\" if you are upgrading or repairing an\n"
"existing system.\n"
"\n"
"Please choose \"Install\" if there are no previous version of Mandrake\n"
"Linux installed or if you wish to boot between various operating systems.\n"
"\n"
"Please choose \"Update\" if you wish to update or repair an already\n"
"installed version of Mandrake Linux.\n"
"\n"
"Depending on your knowledge of GNU/Linux, please choose one of the\n"
"following to install or update your Mandrake Linux operating system:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions.\n"
"\n"
" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
"installation class. The expert installation will allow you to perform a\n"
"highly customized installation. Answering some of the questions can be\n"
"difficult if you do not have a good knowledge of GNU/Linux so do not choose\n"
"this unless you know what you are doing."
msgstr ""
"DrakX skal nu vide om du vil udf�re en forvalgt ('Anbefalet') installation,\n"
"eller om du �nsker at have st�rre kontrol ('Ekspert'). Du kan ogs�\n"
"v�lge om du �nsker at udf�re en installering eller en opgradering af et \n"
"eksisterende system. Klik p� 'Install�r' vil helt udtv�re det eksisterende\n"
"system. V�lg 'Opgrad�r' hvis du vil opgradere eller reparere et\n"
"eksisterende system.\n"
"\n"
"V�lg venligst \"Install�r\" hvis du ikke har nogen tidligere version af\n"
"Mandrake Linux installeret eller du �nsker at have flere operativsystemer.\n"
"\n"
"V�lg venligst \"Opdat�r\" hvis �nsker at at opdatere en allerede "
"installeret\n"
"version af Mandrake Linux.\n"
"\n"
"Afh�ngig af din viden om GNU/Linux kan du v�lge en af de f�lgende niveauer\n"
"under din installation eller opdatering af dit Mandrake Linux styresystem:\n"
"\n"
"* Anbefalet: hvis du aldrig har installeret et GNU/Linux operativ system s�\n"
"v�lg det her. Installationen vil v�re meget nem og du vil kun blive\n"
"stillet nogen f� sp�rgsm�l.\n"
"\n"
"* Ekspert: hvis du har en god viden om GNU/Linux, kan du v�lge dette\n"
"installationsniveau. Ekspertinstallationen vil lade dig lave meget "
"tilpassede installationer. Besvarelse af nogen af sp�rgsm�lene\n"
"kan v�re meget sv�r hvis du ikke har s� godt et kendskab til\n"
"GNU/Linux. S� lad v�re med at v�lge dette, medmindre du ved hvad du laver."

#: ../../help.pm_.c:521
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you will not even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards."
msgstr ""
"Normalt vil drakX have valgt det rigtige tastatur til dig (afh�ngigt af \n"
"sproget du har valgt) og du vil s� ikke se dette trin. Men du har m�ske "
"ikke \n"
"et tastatur som svarer n�jagtigt til dit sprog: for eksempel hvis du er en \n"
"engelsktalende svejtser, vil du m�ske stadig �nske at dit tastatur skal "
"v�re \n"
"et svejtsisk tastatur. Eller hvis du taler engelsk men bor i Qu�bec, er du \n"
"m�ske i samme situation. I begge tilf�lde m� du g� tilbage til dette \n"
"installationstrin og v�lge et passende tastatur fra listen.\n"
"\n"
"Klik p� 'mere'-tasten for at blive pr�senteret for den fulde \n"
"liste af underst�ttede tastaturer."

#: ../../help.pm_.c:534
msgid ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales click the \"OK\" button to continue."
msgstr ""
"V�lg venligst dit foretrukne sprog for brug under installation og p� "
"systemet.\n"
"\n"
"Der er en Avanceret-knap som lader dig v�lge andre sprog, der installeres \n"
"p� maskinen. Valg af andre sprog vil installere de sprogspecifikke filer\n"
"for systemdokumentation og programmer. Hvis du for eksempel vil bev�rte\n"
"folk fra Spanien p� din maskine, v�lg da engelsk som hovedsproget\n"
"i tr�-visningen, og afkryds s� i den avancerede afdeling boksen \n"
"svarende til spansk|Spanien.\n"
"\n"
"Bem�rk at flere sprog kan installeres samtidigt. N�r du er f�rdig med\n"
"at v�lge yderligere sprog, s� klik O.k. for at forts�tte."

#: ../../help.pm_.c:547
msgid ""
"By default, DrakX assumes you have a two-button mouse and will set it up\n"
"for third-button emulation. DrakX will automatically know whether it is a\n"
"PS/2, serial or USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the list provided.\n"
"\n"
"If you choose a mouse other than the default you will be presented with a\n"
"mouse test screen. Use the buttons and wheel to verify that the settings\n"
"are good. If the mouse is not working correctly press the space bar or\n"
"RETURN to \"Cancel\" and choose again."
msgstr ""
"Normalt antager drakX at du har en to-knapsmus og vil lave en ops�tning\n"
"hvor den tredje knap emuleres. DrakX vil automatisk vide om den er PS/2,\n"
"seriel eller USB.\n"
"\n"
"Hvis du �nsker en anden type mus, v�lg da den rigtige type mus fra den\n"
"viste liste.\n"
"\n"
"Hvis du v�lger en mus forskellig fra den forvalgte, vil du blive "
"pr�senteret\n"
"for en sk�rm for museafpr�vning. Brug knapperne og hjulet for at "
"efterpr�ve,\n"
"om indstillerne er gode. Hvis musen ikke virker korrekt, tryk da p�\n"
"mellemrumstangenten eller vognretur for at 'Annullere' og v�lg forfra."

#: ../../help.pm_.c:560
msgid ""
"Please select the correct port. For example, the COM1 port under MS Windows\n"
"is named ttyS0 under GNU/Linux."
msgstr ""
"V�lg venligst den korrekte port. For eksempel er navnet for COM1-porten \n"
"under MS Windows 'ttyS0' under GNU/Linux."

#: ../../help.pm_.c:564
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"\"incorrect\" password will have to be used the first time you connect.\n"
"\n"
"In expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""
"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux-\n"
"system: Du skal indtaste din root-adgangskode. Root er "
"systemadministratoren\n"
"og er den eneste der har lov til at lave opdateringer, tilf�je brugere,\n"
"�ndre i den overordnede systemkonfiguration og s� videre. Kort sagt, root\n"
"kan g�re alt! Derfor skal du v�lge en adgangskode der er sv�r at g�tte -\n"
"DrakX vil fort�lle dig hvis det er for nemt. Som v�st kan du v�lge ikke at\n"
"indtaste en adgangskode, men vi advarer dig p� det kraftigste mod dette,\n"
"om ikke andet med �n begrundelse: tro ikke at fordi du startede GNU/Linux "
"op, s� er dine andre operativsystemer velforvarede. Da root kan overvinde\n"
"alle forhindringer og uforvarende slette alle data p� partitioner ved\n"
"sorgl�st at behandle partitionerne selv, er det vigtigt at det er\n"
"vanskeligt at blive root.\n"
"\n"
"Adgangskoden b�r v�re en blanding af bogstaver og tal og mindst 8 tegn\n"
"langt. Skriv aldrig en adgangskode ned for root - det g�r det for nemt\n"
"at bryde ind i et system.\n"
"\n"
"G�r dog ikke adgangskoden for lang eller kompliceret da du skal v�re i "
"stand\n"
"til at huske den uden for stort besv�r.\n"
"\n"
"Adgangskoden vil ikke blive vist p� sk�rmen n�r du indtaster den.\n"
"Du skal derfor indtaste adgangskoden to gange, for at begr�nse risikoen\n"
"for tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil\n"
"denne 'ukorrekte' adgangskode v�re kr�vet n�r du forbinder dig til "
"systemet.\n"
"\n"
"I ekspert-tilstand vil du blive spurgt om du vil koble op til en\n"
"autenticerings-server, som NIS eller NDAP.\n"
"\n"
"Hvis dit netv�rk bruger LDAP (eller NIS)-protokollen til autentificering,\n"
"v�lg da LDAP (eller NIS). Hvis du ikke v�d det, s� sp�rg din "
"systemadministrator.\n"
"\n"
"Hvis din maskine ikke er forbundet til noget administreret netv�rk, �nsker "
"du\n"
"nok at v�lge Lokale filer for autenticering."

#: ../../help.pm_.c:600
msgid ""
"LILO and GRUB are boot loaders for GNU/Linux. This stage, normally, is\n"
"totally automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if Windows boot sector is found, it will replace it with a GRUB/LILO "
"boot\n"
"sector. Hence, you will be able to load either GNU/Linux or another OS;\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one;\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Boot loader to use\": you have three choices:\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"GRUB\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu "
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the boot loader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a boot loader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"Mandrake Linux installs its own boot loader, which will let you boot either\n"
"GNU/Linux or any other operating systems which you have on your system.\n"
"\n"
"If there is another operating system installed on your machine, it will be\n"
"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
"existing options. Double-clicking on an existing entry allows you to change\n"
"its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
"on to the next installation step."
msgstr ""
"LILO og GRUB er opstartsindl�sere for GNU/Linux. Dette trin er nomalt helt\n"
"automatiseret. Faktisk vil drakX analysere opstartsektoren p� disken og vil\n"
"handle ud fra dette, afh�ngig af hvad den finder h�r:\n"
"\n"
" * Hvis den finder en Windows opstartssektor vil den erstatte den med en\n"
"GRUB/LILO opstartssektor, s� du kan starte GNU/Linux eller Windows;\n"
"\n"
" * Hvis den finder en GRUB eller LILO opstartssektor vil den erstatte den\n"
"med en ny;\n"
"\n"
"Hvis den er i tvivl vil drakX vise en dialog med forskellige muligheder.\n"
"\n"
" * Opstartsindl�ser der bruges: du f�r her tre muligheder:\n"
"\n"
"   * LILO med grafisk menu: hvis du foretr�kker LILO med grafikgr�nseflade.\n"
"\n"
"   * Grub: hvis du foretr�kker GRUB (tekstmenu).\n"
"\n"
"   * LILO med tekstmenu: hvis du foretr�kker LILO med tekstgr�nseflade.\n"
"\n"
" * opstartsenhed: I de fleste tilf�lde vil det ikke v�re n�dvendigt at "
"�ndre\n"
"standard (/dev/hda), men hvis du foretr�kker det, kan opstartsindl�seren\n"
"installeres p� det andet diskdrev (/dev/hdb), eller endda p� en diskette\n"
"(/dev/fd0).\n"
"\n"
" * Forsinkelse f�r opstart af standardsystem: Ved genstart af maskinen er\n"
"dette den tid der gives til brugeren til at v�lge en anden opstartsindgang\n"
"end standard i opstartsindl�serens menu.\n"
"\n"
"V�r opm�rksom p� at hvis du v�lger ikke at installere en opstartsindl�ser\n"
"(ved at v�lge Annull�r h�r), skal du v�re sikker p� at du har en anden m�de\n"
"at starte dit Mandrake Linux-system op p�! V�r ogs� sikker p� hvad du g�r "
"hvis\n"
"du �ndrer nogen af tilvalgene her!\n"
"\n"
"Et klik p� Avanceret-knappen i denne dialog vil tilbyde mange avancerede\n"
"muligheder beregnet til ekspertbrugeren.\n"
"\n"
"Mandrake Linux installerer sin egen opstartsindl�ser, som vil lade dig\n"
"opstarte enten GNU/Linux eller ethvert andet operativsystem der er "
"installeret\n"
"p� din maskine.\n"
"\n"
"Hvis der er et andet operativsystem installeret p� din maskine, vil det\n"
"automatisk blive tilf�jet til opstartsmenuen. Her kan du v�lge at "
"finindstille\n"
"de eksisterende muligheder. Et dobbelt-klik p� en eksisterende indgang lader "
"dig\n"
"�ndre dens parametre eller fjerne den; Tilf�j opretter en ny indgang; og "
"F�rdig\n"
"forts�tter til det n�ste installationstrin."

#: ../../help.pm_.c:647
msgid ""
"LILO (the LInux LOader) and GRUB are boot loaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (LInux LOaderen) og GRUB er opstartsindl�sere: de kan starte enten\n"
"GNU/Linux eller ethvert andet system op, som ligger p� din maskine.\n"
"Normalt bliver disse andre operativsystemer fundet korrekt og installeret.\n"
"Hvis dette ikke er tilf�ldet, kan du lave en indgang i h�nden med denne\n"
"sk�rm. V�r omhyggelig med at v�lge de korrekte parametre.\n"
"\n"
"M�ske vil du ikke �nske at give nogensomhelst adgang til disse andre\n"
"operativsystemer. I dette tilf�lde kan du slette de tilsvarende indgange.\n"
"Men s� har du brug for en opstartsdiskette for at starte disse\n"
"operativsystemer!"

#: ../../help.pm_.c:658
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"to GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"Det er n�dvendigt at du angiver hvor du �nsker at placere oplysningerne\n"
"kr�vet for at opstarte GNU/Linux.\n"
"\n"
"Med mindre du v�d pr�cist hvad du g�r, b�r du v�lge F�rste sektor p� drevet\n"
"(MBR)."

#: ../../help.pm_.c:665
msgid ""
"Here we select a printing system for your computer to use. Other OSes may\n"
"offer you one, but Mandrake offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have "
"a\n"
"direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have any networked printers. It will handle\n"
"only very simple network cases and is somewhat slow for networks. Pick\n"
"\"pdq\" if this is your maiden voyage to GNU/Linux. You can change your\n"
"choices after install by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'' is excellent at printing to\n"
"your local printer and also halfway round the planet. It is simple and can\n"
"act like a server or a client for the ancient \"lpd\" printing system, so\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports IPX protocol, and\n"
"it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."
msgstr ""
"Her v�lger vi et udskrivningssystem som din maskine skal bruge. Andre\n"
"styresystemer tilbyder m�ske �t, men Mandrake tilbyder tre.\n"
"\n"
" * 'pdq' - som betyder 'print, don't queue' (udskriv, k� ej), er valget,\n"
"hvis du har en direkte forbindelse til din printer, og du �nsker at kunne\n"
"klare printproblemer med det samme, og du ikke har nogen printere via\n"
"netv�rk. Det vil kun behandle meget simple netv�rkstilf�lde, og er lidt\n"
"sl�vt p� netv�rk. V�lg 'pdq' hvis dette er din jomfrurejse med GNU/Linux.\n"
"Du kan �ndre dit valg efter installeringen ved at k�re PrinterDrake fra\n"
"Mandrakes Kontrolcenter, og klikke p� ekspert-knappen.\n"
"\n"
" * 'CUPS' - 'Common Unix Printing System' (F�lles printersystem for Unix)\n"
"er fremragende til at udskrive p� din lokale printer, og ogs� p� den,\n"
"der st�r p� den anden side af jordkloden. Det er simpelt, og kan virke\n"
"som en server eller klient for det bedagede 'lpd'-printsystem, s� det\n"
"er kompatibelt med de tidligere systemer. Det kan mange finesser, men den\n"
"basale ops�tning er n�sten lige s� nem som for 'pdq'. Hvis du har brug\n"
"for at dette efterligner en 'lpd'-server, skal du aktivere\n"
"'cups-lpd'-d�monen. Det har grafiske gr�nseflader for udskrivning og\n"
"valg af printermuligheder.\n"
"\n"
" * 'lprNG' - 'line printer daemon New Generation' (ny generation af\n"
"linjeskriverd�monen). Dette system kan g�re omtrent det samme som de\n"
"andre, men det vil ogs� kunne skrive til et Novell netv�rk, fordi det\n"
"underst�tter IPX-protokollen, og det kan udskrive direkte til\n"
"skal-kommandoer. Hvis du har brug for Novell eller udskrivning til\n"
"kommandoer uden at bruge en separat kanaliserings-konstruktion, s�\n"
"brug lprNG. Ellers er CUPS at foretr�kke, da det er simplere og bedre\n"
"til at fungere over netv�rk."

#: ../../help.pm_.c:693
msgid ""
"DrakX is now detecting any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI card(s) on your system. If a SCSI card\n"
"is found DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection will sometimes not detect a piece of hardware\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options that the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options that need to be passed, you\n"
"will need to manually provide options to the driver. Please review the\n"
"``User Guide'' (chapter 3, section \"Collecting information on your\n"
"hardware\") for hints on retrieving the parameters required from hardware\n"
"documentation, from the manufacturer's web site (if you have Internet\n"
"access) or from Microsoft Windows (if you used this hardware with Windows\n"
"on your system)."
msgstr ""
"DrakX er nu ved at bestemme alle IDE-enheder der er tilstede p� din "
"maskine.\n"
"Den vil ogs� lede efter en eller flere PCI SCSI-kort p� dit system.\n"
"Hvis et SCSI-kort findes, vil DrakX automatisk installere en driver til "
"det.\n"
"\n"
"Da maskinelefters�gningen nogen gange ikke vil finde et stykke udstyr,\n"
"vil DrakX alligevel sp�rge dig om du har et SCSI-kort installeret i din\n"
"maskine. Du vil blive pr�senteret for en liste af SCSI-kort, som du kan\n"
"v�lge fra. Svar Nej hvis du ikke har noget SCSI-udstyr.\n"
"Hvis du ikke er sikker, kan du ogs� tjekke listen over udstyr i din maskine "
"ved at v�lge Se maskinelinfo og klikke O.k.\n"
"Unders�g listen over udstyr og klik s� p� O.k.-knappen for at vende tilbage\n"
"til sp�rgsm�let om SCSI-udstyr.\n"
"\n"
"Hvis du m�tte angive din kort manuelt, vil DrakX sp�rge om du vil\n"
"specificere nogle indstillingsmuligheder for den. Du b�r dog lade DrakX "
"sp�rge hardware'en om ops�tningen. Det virker som regel fint.\n"
"\n"
"Hvis DrakX ikke kan f� oplysninger om indstillinger ud af udstyret, som\n"
"skal bruges til ops�tningen, skal du angive ops�tningsinformation til "
"driveren.\n"
"Se i brugervejledningen (kapitel 3, underafsnit \"Collective informations on "
"your hardware\")\n"
"om hj�lp med at finde informationen i maskinel-dokumentationen, fra\n"
"fabrikantens side (hvis du har Internet adgang) eller fra Microsoft Windows\n"
"(hvis du brugte dette udstyr med Windows p� dit system)."

#: ../../help.pm_.c:720
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OS's, the entry consists only of a label and the root partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot "
"prompt\n"
"to select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes \"live\".\n"
"Here, you can override this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in \"novideo\" mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a \"*\", if you press [Tab] to see the boot\n"
"selections."
msgstr ""
"Du kan tilf�je flere valgmuligheder for Yaboot, enten til andre\n"
"styresystemer, andre kerner, eller til n�d-opstart.\n"
"\n"
"For andre styresystemer - indtast navn og rodpartition\n"
"\n"
"Der er for Linux nogen f� valgmuligheder:\n"
"\n"
" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten\n"
"fra Yaboot for at v�lge denne opstartsmulighed.\n"
"\n"
" * Image: Dette vil v�re navnet p� den kerne der skal opstartes.\n"
"Typisk vmlinux eller en variation p� vmlinux med en endelse.\n"
"\n"
" * Root: root enheden eller \"/\" for din Linux installation.\n"
"\n"
" * Append: p� Apple udstyr bruges kerne-append muligheden ganske ofte\n"
"til at hj�lpe med initialisering af billedudstyr, eller til at aktivere\n"
"emulering af museknapper for de ofte manglende knap 2 og knap 3 p� musen\n"
"p� en typisk Apple mus. Det f�lgende er nogle eksempler:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: denne mulighed kan bruges enten til at indl�se de f�rste moduler, "
"f�r\n"
"opstartsenheden er tilg�ngelig, eller til at indl�se en ramdisk ved opstart\n"
"i en n�dsituation.\n"
"\n"
" * Initrd-size: den almindelige st�rrelse p� en ramdisk er generelt 4.096 "
"bytes.\n"
"Hvis du har brug for at udl�gge en stor ramdisk kan denne mulighed bruges.\n"
"\n"
" * Read-write: normalt bliver rod-partitionen f�rst bragt op "
"skrivebeskyttet\n"
"for at muligg�re et filsystemstjek f�r systemet g�r i luften.\n"
"Her kan du tilsides�tte denne ops�tning.\n"
"\n"
" * NoVideo: skulle Apple billedudstyret vise sig at v�re specielt "
"problemfyldt\n"
"kan du v�lge denne mulighed for at starte op i 'novideo'-tilstand,\n"
"med indbygget rammebufferunderst�ttelse.\n"
"\n"
" * Default: v�lger denne indgang som v�rende det normale Linux valg,\n"
"som v�lges bare ved at trykke RETUR ved yaboots ledetekst. Denne indgang "
"vil\n"
"ogs� blive fremh�vet med en '*', hvis du trykker Tab for at se "
"opstartsvalgene."

#: ../../help.pm_.c:765
msgid ""
"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful as\n"
"to choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message that is displayed before the boot\n"
"prompt.\n"
"\n"
" * Boot Device: indicate where you want to place the information required "
"to\n"
"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
"hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux.\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected.\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
"Open\n"
"Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"Yaboot er en systemstarter til NewWorld MacIntosh-maskinel. Den kan\n"
"starte enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede p� din\n"
"computer. S�dvanligvis vil disse andre styresystemer blive korrekt opdaget\n"
"og installeret. Hvis dette ikke skulle v�re tilf�ldet kan du her tilf�je en\n"
"indgang i h�nden. V�r forsigtig med at v�lger de korrekte parametre.\n"
"\n"
"Yaboots hovedvalg er:\n"
"\n"
"  * Init-besked: En enkel tekstbesked som vises f�r valg af opstart.\n"
"\n"
"  * Opstartsenhed: Angiver hvor du �nsker at placere informationen\n"
"som er n�dvendig for at starte GNU/Linux. Du vil generelt have indstillet\n"
"en bootstrap-partition tidligere til at have denne information.\n"
"\n"
"  * �ben firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser\n"
"mulige med yaboot. Den f�rste forsinkelse bliver m�lt i sekunder og du\n"
"kan ved det punkt v�lge mellem CD, OF-opstart, MacOS eller Linux.\n"
"\n"
"  * Ventetid f�r kerneopstart: Denne er lig LILO-opstartsforsinkelsen.\n"
"Efter at have valgt Linux vil du have denne ventetid gange 0,1 sekunder\n"
"f�r din forvalgte kernebeskrivelse bliver valgt.\n"
"\n"
"  * Aktiv�r CD-opstart?: Hvis du v�lger dette valg vil \n"
"du kunne trykke 'C' for CD ved det f�rste opstartsvalg.\n"
"\n"
"  * Aktiver OF-opstart?: Hvis du v�lger dette valg vil du kunne\n"
"trykke 'N' for �ben Firmware ved det f�rste opstartsvalg.\n"
"\n"
"  * Forvalgt styresystem: Du kan v�lge hvilket forvalgt styresystem der\n"
"skal startes n�r �ben Firmwareforsinkelsen er udl�bet."

#: ../../help.pm_.c:798
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": mouse check the current mouse configuration and click on the\n"
"button to change it if necessary.\n"
"\n"
" * \"Keyboard\": keyboard check the current keyboard map configuration and\n"
"click on the button to change that if necessary.\n"
"\n"
" * \"Timezone\": time zoneDrakX, by default, guesses your time zone from "
"the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""
"Her pr�senteres forskellige parametre relateret til din maskine. Afh�ngig "
"af\n"
"dit installerede maskinel vil - eller vil du ikke - se de f�lge indgange:\n"
"\n"
" * Mus: mus tjek den aktuelle musekonfiguration og klik p� knappen for om\n"
"n�dvendigt at �ndre den.\n"
"\n"
" * Tastatur: tastatur tjek den aktuelle tastaturkonfiguration og klik p�\n"
"knappen for om n�dvendigt at �ndre den.\n"
"\n"
" * Tidszone: tidszone DrakX g�tter normalt din tidszone fra det sprog,\n"
"du har valgt. Men ogs� her, som ved valg af tastatur, er du m�ske ikke i\n"
"det land som dit sprog indikerer, s� du har m�ske brug for at klikke p�\n"
"Tidszone-knappen s� du kan konfigurere uret svarende til den tidszone\n"
"du er i.\n"
"\n"
" * Printer: Et klik p� Ingen printer-knappen vil �bne guiden for\n"
"printerkonfigurering.\n"
"\n"
" * Lydkort: Hvis et lydkort er blevet fundet p� dit system, vil det blive\n"
"vist her. Ingen �ndringer er mulige p� installationstidspunktet.\n"
"\n"
" * Tv-kort: Hvis et tv-kort er blevet fundet p� dit system, vil det blive\n"
"vist her. Ingen �ndringer er mulige p� installationstidspunktet.\n"
"\n"
" * ISDN-kort: Hvis et ISDN-kort er blevet fundet p� dit system, vil det "
"blive\n"
"vist her. Du kan klikke p� knappen for at �ndre de tilh�rende parametre."

#: ../../help.pm_.c:827
msgid ""
"Choose the hard drive you want to erase to install your new Mandrake Linux\n"
"partition. Be careful, all data present on it will be lost and will not be\n"
"recoverable!"
msgstr ""
"V�lg det diskdrev som du vil slette for at installere din nye Mandrake "
"Linux\n"
"partition. V�r forsigtig, alle data som er p� der, vil g� tabt og vil ikke\n"
"kunne genskabes!"

#: ../../help.pm_.c:832
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"Klik p� O.k. hvis du �nsker at slette alle data og pertitioner der ligger\n"
"p� dette diskdrev. V�r omhyggelig, efter klik p� O.k. vil du ikke v�re\n"
"i stand til at redde nogen data eller partitioner, der ligger p� dette\n"
"diskdrev, inklusive alle Windows data."

#: ../../install2.pm_.c:114
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is missing)"
msgstr "Kan ikke f� fat i kernemoduler svarende til din kerne (fil %s mangler)"

#: ../../install_any.pm_.c:421
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Du har valgt f�lgende tjenere: %s\n"
"\n"
"\n"
"Disse tjenere er aktiveret som standard. De har ingen kendte sikkerheds-\n"
"problemer, men nogen nye kan blive fundet. I s� tilf�lde skal du opgradere\n"
"s� snart som mulig.\n"
"\n"
"\n"
"�nsker du virkelig at installere disse tjenere?\n"

#: ../../install_any.pm_.c:457
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan ikke bruge rundkastning uden noget NIS-dom�ne"

#: ../../install_any.pm_.c:793
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Inds�t en tom diskette i diskette-drev %s"

#: ../../install_any.pm_.c:797
msgid "This floppy is not FAT formatted"
msgstr "Denne diskette er ikke formatteret til FAT"

#: ../../install_any.pm_.c:809
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"For at bruge dette gemte pakkevalg, start installationen op med``linux "
"defcfg=floppy''"

#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:737
#, c-format
msgid "Error reading file %s"
msgstr "Fejl ved l�sning af filen %s"

#: ../../install_gtk.pm_.c:84 ../../install_steps_gtk.pm_.c:325
#: ../../interactive.pm_.c:107 ../../interactive.pm_.c:122
#: ../../interactive.pm_.c:286 ../../interactive.pm_.c:308
#: ../../interactive_http.pm_.c:104 ../../interactive_newt.pm_.c:170
#: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:415
#: ../../my_gtk.pm_.c:716 ../../my_gtk.pm_.c:738
msgid "Ok"
msgstr "O.k."

#: ../../install_interactive.pm_.c:23
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Noget maskinel p� din maskine skal bruge ''propriet�re'' drivere for at "
"virke.\n"
"Du kan finde information om dem hos: %s"

#: ../../install_interactive.pm_.c:44
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Du skal have en rod partition. For at f� dette, lav en ny partition (eller "
"v�lg en eksisterende).\n"
"V�lg s� kommandoen \"Monterings-sti\" og s�t den til `/'"

#: ../../install_interactive.pm_.c:49 ../../install_steps_graphical.pm_.c:259
msgid "You must have a swap partition"
msgstr "Du skal tildele en partition til Swap"

#: ../../install_interactive.pm_.c:50 ../../install_steps_graphical.pm_.c:261
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""
"Du har ingen Swap partition\n"
"\n"
"Forts�t alligevel?"

#: ../../install_interactive.pm_.c:53 ../../install_steps.pm_.c:165
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Du skal have en FAT-partition monteret under /boot/efi"

#: ../../install_interactive.pm_.c:76
msgid "Use free space"
msgstr "Brug fri plads"

#: ../../install_interactive.pm_.c:78
msgid "Not enough free space to allocate new partitions"
msgstr "Ikke nok fri plads til at tildele nye partitioner"

#: ../../install_interactive.pm_.c:86
msgid "Use existing partition"
msgstr "Brug eksisterende partition"

#: ../../install_interactive.pm_.c:88
msgid "There is no existing partition to use"
msgstr "Der er ingen eksisterende partition der kan bruges"

#: ../../install_interactive.pm_.c:95
msgid "Use the Windows partition for loopback"
msgstr "Brug Windows partitionen til Loopback"

#: ../../install_interactive.pm_.c:98
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Hvilken partition vil du benytte som Linux4Win?"

#: ../../install_interactive.pm_.c:100
msgid "Choose the sizes"
msgstr "V�lg st�rrelserne"

#: ../../install_interactive.pm_.c:101
msgid "Root partition size in MB: "
msgstr "Rod-partitions st�rrelse i Mb: "

#: ../../install_interactive.pm_.c:102
msgid "Swap partition size in MB: "
msgstr "Swap-partitions st�rrelse i Mb: "

#: ../../install_interactive.pm_.c:111
msgid "Use the free space on the Windows partition"
msgstr "Brug den frie plads p� Windows-partitionen"

#: ../../install_interactive.pm_.c:114
msgid "Which partition do you want to resize?"
msgstr "Hvilken partition �nsker du at �ndre st�rrelse p�?"

#: ../../install_interactive.pm_.c:116
msgid "Computing Windows filesystem bounds"
msgstr "Udregner Windows-filsystemets gr�nser"

#: ../../install_interactive.pm_.c:119
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Programmet til at �ndre st�rrelse p� FAT kan ikke behandle din partition, \n"
"den f�lgende fejl opstod: %s"

#: ../../install_interactive.pm_.c:122
msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
msgstr "Din Windows partition er for fragmenteret, k�r venligst 'defrag' f�rst"

#: ../../install_interactive.pm_.c:123
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this operation is\n"
"dangerous. If you have not already done so, you should first exit the\n"
"installation, run scandisk under Windows (and optionally run defrag), then\n"
"restart the installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ADVARSEL!\n"
"\n"
"DrakX vil nu �ndre st�rrelsen p� din Windows-partition. Udvis\n"
"forsigtighed: denne operation er farlig. Hvis du ikke allerede har gjort "
"det, b�r du f�rst g� ud af denne installation, \n"
"k�re scandisk under Windows (og eventuelt defrag)  og s� genstarte\n"
"installationen. Du b�r ogs� tage en sikkerhedskopi af dine data.\n"
"Tryk p� Ok, hvis du er helt sikker."

#: ../../install_interactive.pm_.c:132
msgid "Which size do you want to keep for windows on"
msgstr "Hvilken st�rrelse �nsker du at at beholde Windows p�?"

#: ../../install_interactive.pm_.c:133
#, c-format
msgid "partition %s"
msgstr "partition %s"

#: ../../install_interactive.pm_.c:139
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT st�rrelses�ndring mislykkedes: %s"

#: ../../install_interactive.pm_.c:154
msgid ""
"There is no FAT partitions to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Der er ingen FAT-partitioner at �ndre st�rrelse p�, eller bruge som loopback "
"(eller ikke nok plads tilbage)"

#: ../../install_interactive.pm_.c:160
msgid "Erase entire disk"
msgstr "Slet hele disken"

#: ../../install_interactive.pm_.c:160
msgid "Remove Windows(TM)"
msgstr "Fjern Windows(TM)"

#: ../../install_interactive.pm_.c:163
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Du har mere end et diskdrev, hvilken �nsker du at installere Linux p�?"

#: ../../install_interactive.pm_.c:166
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Alle eksisterende partitioner og deres data vil g� tabt p� drev %s"

#: ../../install_interactive.pm_.c:174
msgid "Custom disk partitioning"
msgstr "Brugerdefineret disk-opdeling"

#: ../../install_interactive.pm_.c:178
msgid "Use fdisk"
msgstr "Brug fdisk"

#: ../../install_interactive.pm_.c:181
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"Du kan nu partitionere %s.\n"
"N�r du er f�rdig, s� husk at gemme med 'w'"

#: ../../install_interactive.pm_.c:210
msgid "You don't have enough free space on your Windows partition"
msgstr "Du har ikke nok fri plads p� din Windows-partition"

#: ../../install_interactive.pm_.c:226
msgid "I can't find any room for installing"
msgstr "Kan ikke finde plads til installering"

#: ../../install_interactive.pm_.c:230
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX partitionerings-guiden fandt de f�lgende l�sninger:"

#: ../../install_interactive.pm_.c:235
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partitionering mislykkedes: %s"

#: ../../install_interactive.pm_.c:241
msgid "Bringing up the network"
msgstr "Bringer netv�rket op"

#: ../../install_interactive.pm_.c:246
msgid "Bringing down the network"
msgstr "Lukker netv�rket ned"

#: ../../install_steps.pm_.c:73
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Der opstod en fejl, men jeg ved ikke hvordan den kan h�ndteres p� en\n"
"p�n m�de.\n"
"Forts�t p� eget ansvar!"

#: ../../install_steps.pm_.c:207
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duplik�r monterings-sti %s"

#: ../../install_steps.pm_.c:384
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
"Enten er dit cdrom-drev eller din cdrom fejlbeh�ftet.\n"
"Tjek cdrom'en p� en f�rdiginstalleret maskine ved brug af \"rpm -qpl "
"Mandrake/RPMS/*.rpm\"\n"

#: ../../install_steps.pm_.c:459
#, c-format
msgid "Welcome to %s"
msgstr "Velkommen til %s"

#: ../../install_steps.pm_.c:506 ../../install_steps.pm_.c:709
msgid "No floppy drive available"
msgstr "Intet tilg�ngeligt diskettedrev"

#: ../../install_steps_auto_install.pm_.c:77
#: ../../install_steps_stdio.pm_.c:23
#, c-format
msgid "Entering step `%s'\n"
msgstr "G�r til trin `%s'\n"

#: ../../install_steps_graphical.pm_.c:287
msgid "Choose the size you want to install"
msgstr "V�lg den samlede st�rrelse som din installation m� fylde"

#: ../../install_steps_graphical.pm_.c:334
msgid "Total size: "
msgstr "Total st�rrelse: "

#: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:387
#, c-format
msgid "Version: %s\n"
msgstr "Version: %s\n"

#: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:388
#, c-format
msgid "Size: %d KB\n"
msgstr "St�rrelse: %d KB\n"

#: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:481
#: ../../install_steps_interactive.pm_.c:509
msgid "Choose the packages you want to install"
msgstr "V�lg pakker som skal installeres"

#: ../../install_steps_graphical.pm_.c:465 ../../interactive_gtk.pm_.c:571
msgid "Info"
msgstr "Info"

#: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:457
#: ../../install_steps_interactive.pm_.c:212
msgid "Install"
msgstr "Install�r"

#: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:497
#: ../../install_steps_interactive.pm_.c:695
msgid "Installing"
msgstr "Installerer"

#: ../../install_steps_graphical.pm_.c:499
msgid "Please wait, "
msgstr "Vent venligst, "

#: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:510
msgid "Time remaining "
msgstr "Resterende tid "

#: ../../install_steps_graphical.pm_.c:502
msgid "Total time "
msgstr "Total tid "

#: ../../install_steps_graphical.pm_.c:507
#: ../../install_steps_interactive.pm_.c:695
msgid "Preparing installation"
msgstr "Forbereder installationen"

#: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:558
#, c-format
msgid "Installing package %s"
msgstr "Installerer pakke %s"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
#: ../../install_steps_gtk.pm_.c:646
msgid "Go on anyway?"
msgstr "Forts�t alligevel?"

#: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:642
msgid "There was an error ordering packages:"
msgstr "Der opstod en fejl ved sorteringen af pakkerne:"

#: ../../install_steps_graphical.pm_.c:577
msgid "Use existing configuration for X11?"
msgstr "Benyt eksisterende konfiguration for X11?"

#: ../../install_steps_gtk.pm_.c:148
msgid ""
"Your system is low on resource. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"Dit system har kun f� resurser. Du kan f� problemer med at installere\n"
"Mandrake Linux. Hvis dette sker, kan du pr�ve en tekst-baseret installation "
"istedet.\n"
"Dette g�res ved at trykke 'F1' ved opstart fra cdrommen, og s� skrive 'text'."

#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:187
msgid "Install Class"
msgstr "Installationsmetode"

#: ../../install_steps_gtk.pm_.c:162
msgid "Please, choose one of the following classes of installation:"
msgstr "V�lg venligst en af de f�lgende installations-m�der"

#: ../../install_steps_gtk.pm_.c:228
#, c-format
msgid ""
"The total size for the groups you have selected is approximately %d MB.\n"
msgstr "Den totale st�rrelse af de grupper du har valg er cirka %d Mb.\n"

#: ../../install_steps_gtk.pm_.c:230
#, c-format
msgid ""
"If you wish to install less than this size,\n"
"select the percentage of packages that you want to install.\n"
"\n"
"A low percentage will install only the most important packages;\n"
"a percentage of 100%% will install all selected packages."
msgstr ""
"Hvis du �nsker at installere mindre end denne st�rrelse,\n"
"s� v�lg procentdelen af pakker som du vil installere.\n"
"\n"
"En lav procentdel vil kun installere de vigtigste pakker;\n"
"en procentdel p� 100%% vil installere alle valgte pakker."

#: ../../install_steps_gtk.pm_.c:235
#, c-format
msgid ""
"You have space on your disk for only %d%% of these packages.\n"
"\n"
"If you wish to install less than this,\n"
"select the percentage of packages that you want to install.\n"
"A low percentage will install only the most important packages;\n"
"a percentage of %d%% will install as many packages as possible."
msgstr ""
"Du har kun plads p� din disk til %d%% af disse pakker.\n"
"\n"
"Hvis du �nsker at installere mindre end denne st�rrelse,\n"
"s� v�lg procentdelen af pakker som du vil installere.\n"
"En lav procentdel vil kun installere de vigtigste pakker;\n"
"en procentdel p� %d%% vil installere s� mange pakker som muligt."

#: ../../install_steps_gtk.pm_.c:241
msgid "You will be able to choose them more specifically in the next step."
msgstr ""
"Du har mulighed for at v�lge dem mere pr�cist i n�ste installationstrin"

#: ../../install_steps_gtk.pm_.c:243
msgid "Percentage of packages to install"
msgstr "Procentandel pakker til installation"

#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:619
msgid "Package Group Selection"
msgstr "Valg af pakkegrupper"

#: ../../install_steps_gtk.pm_.c:320 ../../install_steps_interactive.pm_.c:634
msgid "Individual package selection"
msgstr "Individuelt pakkevalg"

#: ../../install_steps_gtk.pm_.c:343 ../../install_steps_interactive.pm_.c:598
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Total st�rrelse: %d / %d Mb"

#: ../../install_steps_gtk.pm_.c:385
msgid "Bad package"
msgstr "D�rlig pakke"

#: ../../install_steps_gtk.pm_.c:386
#, c-format
msgid "Name: %s\n"
msgstr "Navn: %s\n"

#: ../../install_steps_gtk.pm_.c:389
#, c-format
msgid "Importance: %s\n"
msgstr "Vigtighed: %s\n"

#: ../../install_steps_gtk.pm_.c:411
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"Du kan ikke v�lge denne pakke, da der ikke er nok plads tilbage til at "
"installere den"

#: ../../install_steps_gtk.pm_.c:416
msgid "The following packages are going to be installed"
msgstr "De f�lgende pakker vil blive installeret"

#: ../../install_steps_gtk.pm_.c:417
msgid "The following packages are going to be removed"
msgstr "De f�lgende pakker vil blive afinstalleret"

#: ../../install_steps_gtk.pm_.c:429
msgid "You can't select/unselect this package"
msgstr "Du kan ikke v�lge/frav�lge denne pakke"

#: ../../install_steps_gtk.pm_.c:441
msgid "This is a mandatory package, it can't be unselected"
msgstr "Dette er en n�dvendig pakke, den kan ikke v�lges fra"

#: ../../install_steps_gtk.pm_.c:443
msgid "You can't unselect this package. It is already installed"
msgstr "Du kan ikke frav�lge denne pakke. Den er allerede installeret"

#: ../../install_steps_gtk.pm_.c:447
msgid ""
"This package must be upgraded\n"
"Are you sure you want to deselect it?"
msgstr ""
"Denne pakke skal opgraderes\n"
"Er du sikker p� at du vil frav�lge den?"

#: ../../install_steps_gtk.pm_.c:451
msgid "You can't unselect this package. It must be upgraded"
msgstr "Du kan ikke frav�lge denne pakke. Den skal opgraderes"

#: ../../install_steps_gtk.pm_.c:456
msgid "Show automatically selected packages"
msgstr "Vis automatisk valgte pakker"

#: ../../install_steps_gtk.pm_.c:460
msgid "Load/Save on floppy"
msgstr "Indl�s/gem p� diskette"

#: ../../install_steps_gtk.pm_.c:461
msgid "Updating package selection"
msgstr "Opdaterer pakkevalg"

#: ../../install_steps_gtk.pm_.c:466
msgid "Minimal install"
msgstr "Minimal installation"

#: ../../install_steps_gtk.pm_.c:503
msgid "Estimating"
msgstr "Beregner"

#: ../../install_steps_gtk.pm_.c:522
msgid "Please wait, preparing installation"
msgstr "Vent venligst, forbereder installationen"

#: ../../install_steps_gtk.pm_.c:553
#, c-format
msgid "%d packages"
msgstr "%d pakker"

#: ../../install_steps_gtk.pm_.c:599
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Advarsel\n"
"\n"
"L�s venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig\n"
"i alt der st�r, m� du ikke installere indholdet af CD�en. Tryk p� 'N�gt' \n"
"for at forts�tte installationen uden disse cdrommer.\n"
"\n"
"\n"
"Visse komponenter p� den n�ste CD er ikke omfattet af GPL licensen eller \n"
"andre lignende licenser. Hver enkelt komponent er derfor omfattet af \n"
"de betingelser der er beskrevet i dets egen licens. \n"
"L�s derfor venligst omhyggeligt betingelserne og f�lg de opstillede "
"betingelser\n"
"n�r du bruger og/eller videredistribuerer komponenterne.\n"
"S�danne licenser forebygger normalt kopiering (sikkerheds-kopiering "
"undtaget) \n"
"videredistribuering, at folk skiller programmet ad, eller �ndrer i "
"komponenterne.\n"
"Ethvert brud p� licensen vil �jeblikkeligt fratage dig rettighederne "
"beskrevet\n"
"i den specifikke licens. Medmindre licensen giver dig lov hertil, vil det \n"
"normalt ikke v�re tilladt at installere programmet p� mere end en "
"computer, \n"
"eller bruge det p� et netv�rk. Hvis du er i tvivl, s� kontakt venligst "
"producenten\n"
"af komponenten direkte.\n"
"Overdragelse til tredjemand eller kopiering af s�danne komponenter "
"inklusive \n"
"dokumentationen er normalt forbudt.\n"
"\n"
"\n"
"Alle rettigheder til komponenterne p� CD�en tilh�rer deres respektive "
"skabere\n"
"og er beskyttet af Lov om Ophavsret.\n"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Accept"
msgstr "Accept�r"

#: ../../install_steps_gtk.pm_.c:627 ../../install_steps_interactive.pm_.c:148
msgid "Refuse"
msgstr "N�gt"

#: ../../install_steps_gtk.pm_.c:628
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Skift din cdrom!\n"
"\n"
"Inds�t cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk p� Ok, n�r det "
"gjort\n"
"Hvis du ikke har den s� tryk p� Annull�r, s� undg�s installation fra denne cd"

#: ../../install_steps_gtk.pm_.c:646
msgid "There was an error installing packages:"
msgstr "Der opstod en fejl ved installeringen af pakkerne:"

#: ../../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr "Der er opst�et en fejl"

#: ../../install_steps_interactive.pm_.c:71
msgid "License agreement"
msgstr "Licensaftale"

# Mangler
#: ../../install_steps_interactive.pm_.c:72
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read carefully this document. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurance of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"Introduktion\n"
"\n"
"Operativsystemet og de forskellige komponenter tilg�ngelige i Mandrake Linux "
"distributionen \n"
"vil herefter blive kaldt \"programmelprodukter\". Programmelprodukterne "
"inkluderer, men er ikke begr�nset til: v�rkt�jss�ttet, metoder, regler og "
"dokumentation.\n"
"\n"
"\n"
"1. Licensaftale\n"
"\n"
"L�s venligst dette dokument. Dette dokument er en licensaftale mellem dig "
"og  \n"
"MandrakeSoft S.A., som g�lder til disse programmelprodukter.\n"
"Ved at installere, kopiere eller bruge disse programmelprodukter accepterer "
"du indirekte \n"
"og fuldt ud denne licensaftale med dens betingelser og regler.\n"
"Hvis du er uenig i nogensomhelst del af denne licens, mister du retten til "
"at installere, kopiere eller bruge \n"
"disse programmelprodukter. \n"
"Hvilket som helst fors�g p� at installere, kopiere eller bruge disse "
"programmelprodukter p� en m�de som ikke er i overensstemmelse \n"
"med betingelserne og reglerne i denne licens er ulovlig og vil betyde at du "
"mister dine rettighedder under denne \n"
"licens. Hvis dette sker, skal du med det samme �del�gge alle kopier af "
"disse \n"
"programmelprodukter.\n"
"\n"
"\n"
"2. Begr�nset garanti\n"
"\n"
"Disse programmelprodukter og dokumenter leveres \"som de er\", uden nogen "
"form for garanti \n"
"efter som hvad lov foreskriver.\n"
"MandrakeSoft S.A. vil under ingen omst�ndigheder undtagen hvad lov "
"foreskriver v�re ansvarlig for specielle, \n"
"tilf�ldige, direkte eller indirekte tab af nogen art (inkluderende uden "
"begr�nsninger, skader ved tab af \n"
"forretning, forstyrrelser af forretning, finansielle tab, advokatbistand, "
"erstatninger som resultat af en retssag \n"
"eller nogen anden form for tab) opst�et under brugen af disse "
"programmelprodukter eller \n"
"mangel p� samme, selv hvis MandrakeSoft S.A. er blevet gjort opm�rksom p� "
"mulighed for s�danne \n"
"skader.\n"
"\n"
"BEGR�NSET GARANTI MED HENSYN TIL REGLER OM BRUG AF FORBUDT PROGRAMMEL I "
"VISSE LANDE\n"
"\n"
"Udover hvad lov foreskriver vil MandrakeSoft S.A. eller deres distribut�rer "
"under ingen omst�ndigheder v�re \n"
"ansvarlig for tilf�ldige, direkte eller indirekte tab af nogen art "
"(inkluderende uden begr�nsninger skader ved tab af \n"
"forretning, forstyrrelser af forretning, finansielle tab, advokatbistand, "
"erstatninger som resultat af en retssag \n"
"eller nogen anden form for tab) opst�et under hentning eller brugen af dette "
"programmel fra Mandrake Linux websider\n"
"som er forbudt i visse lande ved lov.\n"
"Denne begr�nsede garanti g�lder, men er ikke begr�nset til, de st�rke "
"krypteringskomponenter \n"
"inkluderet i disse programmelprodukter.\n"
"\n"
"\n"
"3. GPL licensen og relaterede licenser. \n"
"\n"
"Dette programmel best�r af komponenter lavet af forskellige personer.\n"
"De fleste af disse komponenter bliver reguleret efter vilk�rene og aftalerne "
"i GNU General Public License, herefter kaldet \"GPL\", eller lignende "
"licenser. De fleste af disse licenser tillader dig at bruge, kopiere, "
"tilpasse eller redistribuere komponenterne, de d�kker. L�s venligst "
"vilk�rene\n"
"og aftalerne i licensaftalen for hver komponent f�r du bruger det. Sp�rgsm�l "
"ang�ende en komponent bedes adresseret til komponentens forfatter og ikke "
"til MandrakeSoft.\n"
"Programmerne udviklet af MandrakeSoft S.A. bliver reguleret efter GPL "
"licensen. Dokumentationen skr�vet af MandrakeSoft S.A. bliver reguleret "
"efter en specifik licens. Refer�r venligst til dokumentationen for "
"yderligere detaljer.\n"
"\n"
"\n"
"4. Intellektuelle rettigheder \n"
"\n"
"Alle rettigheder til komponenterne i programmelproduktet tilh�rer deres "
"respektive forfattere, og er\n"
"beskyttet af intellektuelle rettigheds- og ophavsretslove, g�ldende for "
"programmel.\n"
"MandrakeSoft S.A. forbeholder sine rettigheder til at �ndre eller tilpasse "
"programmelprodukterne, helt eller delvist, med alle midler og til alle "
"form�l.\n"
"\"Mandrake\", \"Mandrake Linux\" samt de tilh�rende logoer er varem�rker for "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. G�ldende love \n"
"\n"
"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
"en domstolsafg�relse, \n"
"vil disse dele blive ekskluderet fra denne kontrakt. Du vil forblive bundet "
"af de andre g�ldende dele af\n"
"aftalen.\n"
"Vilk�rene og aftalerne i denne licens er reguleret under fransk lov.\n"
"Alle uenigheder vedr�rende vilk�rene i denne licens vil fortrinsvist blive "
"l�st udenfor domstolene. Som en sidste udvej vil uenighederne blive "
"h�ndteret ved den rette domstol i Paris, Frankrig.\n"
"Ved sp�rgsm�l omkring dette dokument, kontakt venligst MandrakeSoft S.A.  \n"

#: ../../install_steps_interactive.pm_.c:168
#: ../../install_steps_interactive.pm_.c:871
#: ../../standalone/keyboarddrake_.c:28
msgid "Keyboard"
msgstr "Tastatur"

#: ../../install_steps_interactive.pm_.c:169
#: ../../standalone/keyboarddrake_.c:29
msgid "Please, choose your keyboard layout."
msgstr "V�lg venligst tastaturlayout."

#: ../../install_steps_interactive.pm_.c:170
msgid "Here is the full list of keyboards available"
msgstr "Her er den komplette liste over tilg�ngelige tastaturer"

#: ../../install_steps_interactive.pm_.c:187
msgid "Which installation class do you want?"
msgstr "Hvilken installations-klasse �nsker du?"

#: ../../install_steps_interactive.pm_.c:189
msgid "Install/Update"
msgstr "Install�r/Opdat�r"

#: ../../install_steps_interactive.pm_.c:189
msgid "Is this an install or an update?"
msgstr "Er dette en nyinstallation eller en opdatering?"

#: ../../install_steps_interactive.pm_.c:198
msgid "Recommended"
msgstr "Anbefalet"

#: ../../install_steps_interactive.pm_.c:201
#: ../../install_steps_interactive.pm_.c:204
msgid "Expert"
msgstr "Ekspert"

#: ../../install_steps_interactive.pm_.c:212
msgid "Update"
msgstr "Opdatering"

#: ../../install_steps_interactive.pm_.c:224 ../../standalone/mousedrake_.c:48
msgid "Please, choose the type of your mouse."
msgstr "V�lg venligst muse-type."

#: ../../install_steps_interactive.pm_.c:230 ../../standalone/mousedrake_.c:64
msgid "Mouse Port"
msgstr "Muse-port"

#: ../../install_steps_interactive.pm_.c:231 ../../standalone/mousedrake_.c:65
msgid "Please choose on which serial port your mouse is connected to."
msgstr "V�lg venligst hvilken seriel port din mus er forbundet til."

#: ../../install_steps_interactive.pm_.c:239
msgid "Buttons emulation"
msgstr "Emulering af knapper"

#: ../../install_steps_interactive.pm_.c:241
msgid "Button 2 Emulation"
msgstr "Emulering af knap 2"

#: ../../install_steps_interactive.pm_.c:242
msgid "Button 3 Emulation"
msgstr "Emulering af knap 3"

#: ../../install_steps_interactive.pm_.c:261
msgid "Configuring PCMCIA cards..."
msgstr "Konfigurerer PCMCIA kort..."

#: ../../install_steps_interactive.pm_.c:261
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:266
msgid "Configuring IDE"
msgstr "Konfigurerer IDE"

#: ../../install_steps_interactive.pm_.c:266
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:281
msgid "no available partitions"
msgstr "ingen ledige partitioner"

#: ../../install_steps_interactive.pm_.c:284
msgid "Scanning partitions to find mount points"
msgstr "Skanner partitioner for at finde monteringspunkter"

#: ../../install_steps_interactive.pm_.c:292
msgid "Choose the mount points"
msgstr "V�lg monterings-stierne"

#: ../../install_steps_interactive.pm_.c:311
#, c-format
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
"The other solution is to disallow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Jeg kan ikke l�se din partitionstabel, den er for �delagt for mig :(\n"
"Jeg kan fors�ge fortsat at udblanke d�rlige partitioner, ALLE DATA vil g� "
"tabt\n"
"Den anden mulighed er at forbyde DrakX at �ndre partitionstabellen.\n"
"(fejlen er %s)\n"
"\n"
"Er du indforst�et med at �del�gge alle partitionerne?\n"

#: ../../install_steps_interactive.pm_.c:324
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""
"DiskDrake kunne ikke l�se partitionstabellen korrekt.\n"
"Forts�t p� eget ansvar!"

#: ../../install_steps_interactive.pm_.c:340
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Det er ikke plads for 1 MB bootstrap! Installationen vil forts�tte, men for "
"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"

#: ../../install_steps_interactive.pm_.c:349
msgid "No root partition found to perform an upgrade"
msgstr "Ingen rodpartition fundet til opgradering"

#: ../../install_steps_interactive.pm_.c:350
msgid "Root Partition"
msgstr "Rod-partition"

#: ../../install_steps_interactive.pm_.c:351
msgid "What is the root partition (/) of your system?"
msgstr "Hvilken partition indeholder systemets rod-partition (/)?"

#: ../../install_steps_interactive.pm_.c:365
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Du skal genstarte for at aktivere �ndringerne i partitionstabellen"

#: ../../install_steps_interactive.pm_.c:389
msgid "Choose the partitions you want to format"
msgstr "V�lg partitioner der skal formateres"

#: ../../install_steps_interactive.pm_.c:390
msgid "Check bad blocks?"
msgstr "Led efter beskadigede blokke?"

#: ../../install_steps_interactive.pm_.c:416
msgid "Formatting partitions"
msgstr "Formaterer partitioner"

#: ../../install_steps_interactive.pm_.c:418
#, c-format
msgid "Creating and formatting file %s"
msgstr "Opretter og formaterer fil %s"

#: ../../install_steps_interactive.pm_.c:421
msgid "Not enough swap to fulfill installation, please add some"
msgstr "Ikke nok swap-plads til at gennemf�re installationen, tilf�j mere"

#: ../../install_steps_interactive.pm_.c:427
msgid "Looking for available packages"
msgstr "Leder efter tilg�ngelige pakker"

#: ../../install_steps_interactive.pm_.c:433
msgid "Finding packages to upgrade"
msgstr "Leder efter pakker som skal opgraderes"

#: ../../install_steps_interactive.pm_.c:450
#, c-format
msgid ""
"Your system has not enough space left for installation or upgrade (%d > %d)"
msgstr ""
"Dit system har ikke nok plads tilbage til en installation eller opgradering "
"(%d > %d)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Complete (%dMB)"
msgstr "Alting (%dMb)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Minimum (%dMB)"
msgstr "Minimum (%d Mb)"

#: ../../install_steps_interactive.pm_.c:469
#, c-format
msgid "Recommended (%dMB)"
msgstr "Anbefalet (%d Mb)"

#: ../../install_steps_interactive.pm_.c:475
msgid "Custom"
msgstr "Tilpasset"

#: ../../install_steps_interactive.pm_.c:522
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Venligst v�lg indl�s eller gem pakkevalg p� diskette.\n"
"Formatet er det samme som for auto_install-genererede disketter."

#: ../../install_steps_interactive.pm_.c:525
msgid "Load from floppy"
msgstr "Indl�s fra diskette"

#: ../../install_steps_interactive.pm_.c:527
msgid "Loading from floppy"
msgstr "Indl�ser fra diskette"

#: ../../install_steps_interactive.pm_.c:527
msgid "Package selection"
msgstr "Valg af pakker"

#: ../../install_steps_interactive.pm_.c:532
msgid "Insert a floppy containing package selection"
msgstr "Inds�t en diskette med pakkevalget"

#: ../../install_steps_interactive.pm_.c:544
msgid "Save on floppy"
msgstr "Gem p� diskette"

#: ../../install_steps_interactive.pm_.c:605
msgid "Selected size is larger than available space"
msgstr "Valgt st�rrelse er st�rre end tilg�ngelig plads"

#: ../../install_steps_interactive.pm_.c:670
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
"Hvis du ikke har nogen af disse cd'er, klik Annull�r.\n"
"Hvis kun nogen cd'er mangler, frav�lg dem, og klik s� Ok."

#: ../../install_steps_interactive.pm_.c:675
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cdrom med etikette '%s'"

#: ../../install_steps_interactive.pm_.c:704
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Installerer pakke %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:713
msgid "Post-install configuration"
msgstr "Konfiguration efter installation"

#: ../../install_steps_interactive.pm_.c:719
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Inds�t opstartsdisketten i diskette-drevet %s"

#: ../../install_steps_interactive.pm_.c:725
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Inds�t venligst Opdater moduler-disketten i drev %s"

#: ../../install_steps_interactive.pm_.c:750
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user not\n"
"respect the provision of these applicable laws, he/they will incure serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"
msgstr ""
"Du har nu mulighed for at nedl�se programmel, der bruger kryptering.\n"
"\n"
"ADVARSEL:\n"
"\n"
"Grundet forskellige krav til programmel der bruger kryptering, og p�tvunget\n"
"af forskellige lokale lovomr�der, b�r kunder og/eller slutbrugere af\n"
"dette programmel sikre sig at lokale love fra dit/jeres lokalomr�de\n"
"tillader dig/jer at nedl�se, gemme og/eller bruge dette programmel.\n"
"\n"
"Derudover skal kunder og/eller slutbrugere v�re opm�rksomme p� ikke at "
"bryde\n"
"lokale love fra dit/jeres lokalomr�de. Skulle en kunde og/eller slutbruger\n"
"ikke respektere det lokale omr�des love, vil han/de blive udsat\n"
"for seri�se sanktioner.\n"
"\n"
"Under ingen omst�ndigheder kan Mandrakesoft eller deres producenter\n"
"og/eller leverand�rer holdes ansvarlig for speciel, indirekte eller\n"
"tilf�ldig skade (inkluderet, men ikke begr�nset til tab af overskud,\n"
"forretningsafbrydelser, tab af kommercielle data og andre pekuni�re tab,\n"
"eventuelle risici og erstatninger der skal betales i overensstemmelse\n"
"med retlig beslutning) som f�lge af brug, besiddelse eller nedl�sning af\n"
"dette programmel, som kunder og/eller slutbrugere kunne f� adgang til efter\n"
"at have accepteret denne aftale.\n"
"\n"
"\n"
"For sp�rgsm�l om denne aftale, v�r venlig at kontakte \n"
"Mandrakesoft, Inc.\n"
"2400 N. Lincoln Avenue Suite 243\n"
"Altadena California 91001\n"
"USA"

#: ../../install_steps_interactive.pm_.c:782
msgid "Choose a mirror from which to get the packages"
msgstr "V�lg det spejl hvorfra pakkerne skal hentes"

#: ../../install_steps_interactive.pm_.c:793
msgid "Contacting the mirror to get the list of available packages"
msgstr "Kontakter spejlet for at hente listen af tilg�ngelige pakker"

#: ../../install_steps_interactive.pm_.c:796
msgid "Please choose the packages you want to install."
msgstr "V�lg venligst pakkerne som du vil installere."

#: ../../install_steps_interactive.pm_.c:808
msgid "Which is your timezone?"
msgstr "Hvad er din tidszone?"

#: ../../install_steps_interactive.pm_.c:813
msgid "Hardware clock set to GMT"
msgstr "Maskin-ur sat til GMT"

#: ../../install_steps_interactive.pm_.c:814
msgid "Automatic time synchronization (using NTP)"
msgstr "Automatisk tidssynkronisering (ved hj�lp af NTP)"

#: ../../install_steps_interactive.pm_.c:821
msgid "NTP Server"
msgstr "NTP-server"

#: ../../install_steps_interactive.pm_.c:855
#: ../../install_steps_interactive.pm_.c:863 ../../printerdrake.pm_.c:104
msgid "Remote CUPS server"
msgstr "Ekstern CUPS server"

#: ../../install_steps_interactive.pm_.c:856
msgid "No printer"
msgstr "Ingen printer"

#: ../../install_steps_interactive.pm_.c:867 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Oversigt"

#: ../../install_steps_interactive.pm_.c:870
msgid "Mouse"
msgstr "Mus"

#: ../../install_steps_interactive.pm_.c:872
msgid "Timezone"
msgstr "Tidszone"

#: ../../install_steps_interactive.pm_.c:873 ../../printerdrake.pm_.c:1773
#: ../../printerdrake.pm_.c:1844
msgid "Printer"
msgstr "Printer"

#: ../../install_steps_interactive.pm_.c:875
msgid "ISDN card"
msgstr "Internt ISDN-kort"

#: ../../install_steps_interactive.pm_.c:878
msgid "Sound card"
msgstr "Lydkort"

#: ../../install_steps_interactive.pm_.c:881
msgid "TV card"
msgstr "TV-kort"

#: ../../install_steps_interactive.pm_.c:917
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:945
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm_.c:918
#: ../../install_steps_interactive.pm_.c:941
#: ../../install_steps_interactive.pm_.c:954
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:919
#: ../../install_steps_interactive.pm_.c:941
msgid "Local files"
msgstr "Lokale filer"

#: ../../install_steps_interactive.pm_.c:928
#: ../../install_steps_interactive.pm_.c:929 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "S�t root-adgangskode"

#: ../../install_steps_interactive.pm_.c:930
msgid "No password"
msgstr "Ingen adgangskode"

#: ../../install_steps_interactive.pm_.c:935
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr "Dette kodeord er for nemt at g�tte (det skal mindst v�re p� %d tegn)"

#: ../../install_steps_interactive.pm_.c:941 ../../network/modem.pm_.c:47
#: ../../standalone/draknet_.c:604
msgid "Authentication"
msgstr "Identifikation"

#: ../../install_steps_interactive.pm_.c:949
msgid "Authentication LDAP"
msgstr "Autenticering LDAP"

#: ../../install_steps_interactive.pm_.c:950
msgid "LDAP Base dn"
msgstr "LDAP grundl�ggende dn"

#: ../../install_steps_interactive.pm_.c:951
msgid "LDAP Server"
msgstr "LDAP-server"

#: ../../install_steps_interactive.pm_.c:957
msgid "Authentication NIS"
msgstr "Autenticering NIS"

#: ../../install_steps_interactive.pm_.c:958
msgid "NIS Domain"
msgstr "NIS-dom�ne"

#: ../../install_steps_interactive.pm_.c:959
msgid "NIS Server"
msgstr "NIS-server"

#: ../../install_steps_interactive.pm_.c:994
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
"v�re\n"
"afh�ngig af den normale opstarter. Det kan v�re nyttigt, hvis du ikke vil\n"
"installere SILO p� dit system - eller hvis et andet operativsystem fjerner "
"SILO,\n"
"eller hvis SILO ikke virker med dit maskinel. En tilpasset opstartsdiskette "
"kan\n"
"ogs� bruges sammen med Mandrakes `rescue image', hvilket g�r det meget\n"
"nemmere at reparere systemet i tilf�lde af systemnedbrud.\n"
"\n"
"Hvis du �nsker at lave en opstartsdiskette til dit system, inds�t en\n"
"diskette i dit f�rste diskettedrev og tryk 'Ok'."

#: ../../install_steps_interactive.pm_.c:1010
msgid "First floppy drive"
msgstr "F�rste diskette-drev"

#: ../../install_steps_interactive.pm_.c:1011
msgid "Second floppy drive"
msgstr "Andet diskette-drev"

#: ../../install_steps_interactive.pm_.c:1012 ../../printerdrake.pm_.c:1382
msgid "Skip"
msgstr "Spring over"

#: ../../install_steps_interactive.pm_.c:1017
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""
"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at "
"v�re\n"
"afh�ngig af den normale opstarter. Det kan v�re nyttigt, hvis du ikke vil\n"
"installere LILO (eller grub) p� dit system - eller hvis et andet "
"operativsystem fjerner LILO,\n"
"eller hvis LILO ikke virker med din hardware. En tilpasset opstartsdiskette "
"kan\n"
"ogs� bruges sammen med Mandrakes `rescue image', hvilket g�r det meget\n"
"nemmere at reparere systemet i tilf�lde af systemnedbrud.\n"
"\n"
"Vil du lave en opstartsdiskette til dit system?"

#: ../../install_steps_interactive.pm_.c:1026
msgid "Sorry, no floppy drive available"
msgstr "Der er desv�rre ikke noget tilg�ngeligt diskette-drev"

#: ../../install_steps_interactive.pm_.c:1030
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "V�lg det diskette-drev, du vil benytte til at lave boot-disketten"

#: ../../install_steps_interactive.pm_.c:1034
#, c-format
msgid "Insert a floppy in drive %s"
msgstr "Inds�t en tom diskette i diskette-drevet %s"

#: ../../install_steps_interactive.pm_.c:1037
msgid "Creating bootdisk"
msgstr "Oprette opstartsdiskette"

#: ../../install_steps_interactive.pm_.c:1044
msgid "Preparing bootloader"
msgstr "Forbereder opstarter"

#: ../../install_steps_interactive.pm_.c:1055
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""
"Det virker som om du har en OldWorld eller ukendt\n"
"maskine, yaboot opstartsindl�seren vil ikke virke for dig.\n"
"Installationen vil forts�tte, men du skal\n"
"bruge BootX for at starte din maskine."

#: ../../install_steps_interactive.pm_.c:1060
msgid "Do you want to use aboot?"
msgstr "�nsker du at bruge aboot?"

#: ../../install_steps_interactive.pm_.c:1063
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Fejl ved installation af aboot, \n"
"fors�g at gennemtvinge installation selv om dette kan �del�gge den f�rste "
"partition?"

#: ../../install_steps_interactive.pm_.c:1070
msgid "Installing bootloader"
msgstr "Installerer systemopstarter"

#: ../../install_steps_interactive.pm_.c:1076
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Installation af opstarter mislykkedes. Den f�lgende fejl opstod:"

#: ../../install_steps_interactive.pm_.c:1084
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Du beh�ver m�ske at �ndre din �ben Firmware opstartsenhed for\n"
" at sl� systemstarteren til. Hvis du ikke ser systemstarter-beskeden\n"
"ved genstart, s� hold Command-Option-O-F nede og indtast:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Skriv s�: shut-down\n"
"Ved n�ste opstart burde du se systemstarteren."

#: ../../install_steps_interactive.pm_.c:1092 ../../standalone/draksec_.c:23
msgid "Low"
msgstr "Lav"

#: ../../install_steps_interactive.pm_.c:1093 ../../standalone/draksec_.c:24
msgid "Medium"
msgstr "Mellem"

#: ../../install_steps_interactive.pm_.c:1094 ../../standalone/draksec_.c:25
msgid "High"
msgstr "H�j"

#: ../../install_steps_interactive.pm_.c:1098 ../../standalone/draksec_.c:62
msgid "Choose security level"
msgstr "V�lg sikkerhedniveau"

#: ../../install_steps_interactive.pm_.c:1134
#: ../../standalone/drakautoinst_.c:80
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Inds�t en tom diskette i drev %s"

#: ../../install_steps_interactive.pm_.c:1138
#: ../../standalone/drakautoinst_.c:82
msgid "Creating auto install floppy"
msgstr "Laver autoinstallations-diskette"

#: ../../install_steps_interactive.pm_.c:1149
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Nogen dele af installationen er ikke f�rdig\n"
"\n"
"Er du sikker p� du �nsker du at lukke nu?"

#: ../../install_steps_interactive.pm_.c:1160
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from http://www.mandrakelinux.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Tillykke, installationen er f�rdig.\n"
"Fjern boot-mediet og tryk enter for at genstarte.\n"
"\n"
"For information om opdateringer til denne udgivelse af Linux-\n"
"Mandrake, kontakt Errata p� http://www.mandrakelinux.com/.\n"
"\n"
"Information om konfigurering af systemet kan findes i den\n"
"Officielle Mandrake Linux Bruger Guide."

#: ../../install_steps_interactive.pm_.c:1172
msgid "Generate auto install floppy"
msgstr "Laver autoinstallations-diskette"

#: ../../install_steps_interactive.pm_.c:1174
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"Autoinstallation kan ske fuldautomatisk hvis �nsket.\n"
"I s� tilf�lde vil den overtage hele harddisken!!\n"
"(dette er beregnet til at installere p� en anden maskine).\n"
"\n"
"Du foretr�kker m�ske at afspille installationen igen\n"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Automated"
msgstr "Automatisk"

#: ../../install_steps_interactive.pm_.c:1179
msgid "Replay"
msgstr "Afspil igen"

#: ../../install_steps_interactive.pm_.c:1182
msgid "Save packages selection"
msgstr "Gem pakke-valg"

#: ../../install_steps_newt.pm_.c:22
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux Installation %s"

#: ../../install_steps_newt.pm_.c:34
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> mellem elementer  | <Space> v�lger  | <F12> n�ste sk�rm "

#: ../../interactive.pm_.c:73
msgid "kdesu missing"
msgstr "kdesu mangler"

#: ../../interactive.pm_.c:132
msgid "Choose a file"
msgstr "V�lg en fil"

#: ../../interactive.pm_.c:284
msgid "Advanced"
msgstr "Avanceret"

#: ../../interactive.pm_.c:345
msgid "Please wait"
msgstr "Vent venligst"

#: ../../interactive_gtk.pm_.c:681
msgid "Expand Tree"
msgstr "Udvid tr�"

#: ../../interactive_gtk.pm_.c:682
msgid "Collapse Tree"
msgstr "Sammenfold tr�"

#: ../../interactive_gtk.pm_.c:683
msgid "Toggle between flat and group sorted"
msgstr "Skift mellem flad og gruppesorteret"

#: ../../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr "Flertydighed (%s), v�r mere pr�cis\n"

#: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51
#: ../../interactive_stdio.pm_.c:71
msgid "Bad choice, try again\n"
msgstr "D�rligt valg, pr�v igen\n"

#: ../../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr " ? (standard %s) "

#: ../../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr "Dit valg? (standard %s) "

#: ../../interactive_stdio.pm_.c:72
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr "Dit valg? (standard %s  skriv `none' for ingenting) "

#: ../../keyboard.pm_.c:140 ../../keyboard.pm_.c:178
msgid "Czech (QWERTZ)"
msgstr "Tjekkisk (QWERTZ)"

#: ../../keyboard.pm_.c:141 ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:180
msgid "German"
msgstr "Tysk"

#: ../../keyboard.pm_.c:142
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:143 ../../keyboard.pm_.c:186
msgid "Spanish"
msgstr "Spansk"

#: ../../keyboard.pm_.c:144 ../../keyboard.pm_.c:187
msgid "Finnish"
msgstr "Finsk"

#: ../../keyboard.pm_.c:145 ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:188
msgid "French"
msgstr "Fransk"

#: ../../keyboard.pm_.c:146 ../../keyboard.pm_.c:211
msgid "Norwegian"
msgstr "Norsk"

#: ../../keyboard.pm_.c:147
msgid "Polish"
msgstr "Polsk"

#: ../../keyboard.pm_.c:148 ../../keyboard.pm_.c:219
msgid "Russian"
msgstr "Russisk"

#: ../../keyboard.pm_.c:150 ../../keyboard.pm_.c:221
msgid "Swedish"
msgstr "Svensk"

#: ../../keyboard.pm_.c:151 ../../keyboard.pm_.c:236
msgid "UK keyboard"
msgstr "Britisk"

#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:237
msgid "US keyboard"
msgstr "Amerikansk"

#: ../../keyboard.pm_.c:159
msgid "Albanian"
msgstr "Albansk"

#: ../../keyboard.pm_.c:160
msgid "Armenian (old)"
msgstr "Armensk (gammel)"

#: ../../keyboard.pm_.c:161
msgid "Armenian (typewriter)"
msgstr "Armensk (skrivemaskine)"

#: ../../keyboard.pm_.c:162
msgid "Armenian (phonetic)"
msgstr "Armensk (fonetisk)"

#: ../../keyboard.pm_.c:167
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidiansk (latin)"

#: ../../keyboard.pm_.c:169
msgid "Belgian"
msgstr "Belgisk"

#: ../../keyboard.pm_.c:170
msgid "Bulgarian"
msgstr "Bulgarsk"

#: ../../keyboard.pm_.c:171
msgid "Brazilian (ABNT-2)"
msgstr "Brasiliansk"

#: ../../keyboard.pm_.c:172
msgid "Belarusian"
msgstr "Hviderussisk"

#: ../../keyboard.pm_.c:173
msgid "Swiss (German layout)"
msgstr "Schweizisk (Tysk layout)"

#: ../../keyboard.pm_.c:174
msgid "Swiss (French layout)"
msgstr "Schweizisk (Fransk layout)"

#: ../../keyboard.pm_.c:179
msgid "Czech (QWERTY)"
msgstr "Tjekkisk (QWERTY)"

#: ../../keyboard.pm_.c:181
msgid "German (no dead keys)"
msgstr "Tysk (ingen d�de taster)"

#: ../../keyboard.pm_.c:182
msgid "Danish"
msgstr "Dansk"

#: ../../keyboard.pm_.c:183
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: ../../keyboard.pm_.c:184
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norsk)"

#: ../../keyboard.pm_.c:185
msgid "Estonian"
msgstr "Estisk"

#: ../../keyboard.pm_.c:189
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgisk (russisk layout)"

#: ../../keyboard.pm_.c:190
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgisk (Latin layout)"

#: ../../keyboard.pm_.c:191
msgid "Greek"
msgstr "Gr�sk"

#: ../../keyboard.pm_.c:192
msgid "Hungarian"
msgstr "Ungarsk"

#: ../../keyboard.pm_.c:193
msgid "Croatian"
msgstr "Kroatisk"

#: ../../keyboard.pm_.c:194
msgid "Israeli"
msgstr "Israelsk"

#: ../../keyboard.pm_.c:195
msgid "Israeli (Phonetic)"
msgstr "Israelsk (Fonetisk)"

#: ../../keyboard.pm_.c:196
msgid "Iranian"
msgstr "Iransk"

#: ../../keyboard.pm_.c:197
msgid "Icelandic"
msgstr "Islandsk"

#: ../../keyboard.pm_.c:198
msgid "Italian"
msgstr "Italiensk"

#: ../../keyboard.pm_.c:200
msgid "Japanese 106 keys"
msgstr "Japansk 106 taster"

#: ../../keyboard.pm_.c:201
msgid "Korean keyboard"
msgstr "Koreansk tastatur"

#: ../../keyboard.pm_.c:202
msgid "Latin American"
msgstr "Latinamerikansk"

#: ../../keyboard.pm_.c:203
msgid "Lithuanian AZERTY (old)"
msgstr "Litauisk AZERTY (gammel)"

#: ../../keyboard.pm_.c:205
msgid "Lithuanian AZERTY (new)"
msgstr "Litauisk AZERTY (ny)"

#: ../../keyboard.pm_.c:206
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litauisk \"talr�kke\" QWERTY"

#: ../../keyboard.pm_.c:207
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litauisk \"fonetisk\" QWERTY"

#: ../../keyboard.pm_.c:208
msgid "Latvian"
msgstr "Lettisk"

#: ../../keyboard.pm_.c:209
msgid "Macedonian"
msgstr "Makedonisk"

#: ../../keyboard.pm_.c:210
msgid "Dutch"
msgstr "Hollandsk"

#: ../../keyboard.pm_.c:212
msgid "Polish (qwerty layout)"
msgstr "Polsk (polsk layout)"

#: ../../keyboard.pm_.c:213
msgid "Polish (qwertz layout)"
msgstr "Polsk (polsk layout)"

#: ../../keyboard.pm_.c:214
msgid "Portuguese"
msgstr "Portugisisk"

#: ../../keyboard.pm_.c:215
msgid "Canadian (Quebec)"
msgstr "Canadisk (Qu�bec)"

#: ../../keyboard.pm_.c:217
msgid "Romanian (qwertz)"
msgstr "Russisk (qwertz)"

#: ../../keyboard.pm_.c:218
msgid "Romanian (qwerty)"
msgstr "Russisk (qwerty)"

#: ../../keyboard.pm_.c:220
msgid "Russian (Yawerty)"
msgstr "Russisk (Yawerty)"

#: ../../keyboard.pm_.c:222
msgid "Slovenian"
msgstr "Slovensk"

#: ../../keyboard.pm_.c:226
msgid "Slovakian (QWERTZ)"
msgstr "Slovakisk (QWERTZ)"

#: ../../keyboard.pm_.c:227
msgid "Slovakian (QWERTY)"
msgstr "Slovakisk (QWERTY)"

#: ../../keyboard.pm_.c:229
msgid "Serbian (cyrillic)"
msgstr "Serbisk (kyrillisk)"

#: ../../keyboard.pm_.c:230
msgid "Thai keyboard"
msgstr "Thailandsk"

#: ../../keyboard.pm_.c:232
msgid "Tajik keyboard"
msgstr "Tajik tastatur"

#: ../../keyboard.pm_.c:233
msgid "Turkish (traditional \"F\" model)"
msgstr "Tyrkisk (traditionel \"F\" model)"

#: ../../keyboard.pm_.c:234
msgid "Turkish (modern \"Q\" model)"
msgstr "Tyrkisk (moderne \"Q\" model)"

#: ../../keyboard.pm_.c:235
msgid "Ukrainian"
msgstr "Ukrainsk"

#: ../../keyboard.pm_.c:238
msgid "US keyboard (international)"
msgstr "Amerikansk (internaltionalt)"

#: ../../keyboard.pm_.c:239
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vietnamesisk \"talr�kke\" QWERTY"

#: ../../keyboard.pm_.c:240
msgid "Yugoslavian (latin)"
msgstr "Jugoslavisk (latinsk)"

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Cirkul�re monteringer %s\n"

#: ../../lvm.pm_.c:83
msgid "Remove the logical volumes first\n"
msgstr "Fjern de logiske delarkiver f�rst\n"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun-mus"

#: ../../mouse.pm_.c:31
msgid "Standard"
msgstr "Standard"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Standard PS2 mus med hjul"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:62
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking-mus"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:58
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:67
msgid "1 button"
msgstr "1 knap"

#: ../../mouse.pm_.c:44
msgid "Generic"
msgstr "Standard"

#: ../../mouse.pm_.c:45
msgid "Wheel"
msgstr "Hjul"

#: ../../mouse.pm_.c:48
msgid "serial"
msgstr "seriel"

#: ../../mouse.pm_.c:50
msgid "Generic 2 Button Mouse"
msgstr "Standard 2-knaps mus"

#: ../../mouse.pm_.c:51
msgid "Generic 3 Button Mouse"
msgstr "Standard 3-knaps mus"

#: ../../mouse.pm_.c:52
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:53
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:54
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:56
msgid "Logitech CC Series"
msgstr "Logitech CC Serien (seriel)"

#: ../../mouse.pm_.c:57
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:59
msgid "MM Series"
msgstr "MM Serien"

#: ../../mouse.pm_.c:60
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:61
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech mus (seriel, gammel C7 type)"

#: ../../mouse.pm_.c:65
msgid "busmouse"
msgstr "Busmus"

#: ../../mouse.pm_.c:68
msgid "2 buttons"
msgstr "2 knapper"

#: ../../mouse.pm_.c:69
msgid "3 buttons"
msgstr "3 knapper"

#: ../../mouse.pm_.c:72
msgid "none"
msgstr "ingenting"

#: ../../mouse.pm_.c:74
msgid "No mouse"
msgstr "Ingen mus"

#: ../../mouse.pm_.c:482
msgid "Please test the mouse"
msgstr "Test venligst musen"

#: ../../mouse.pm_.c:483
msgid "To activate the mouse,"
msgstr "For at aktivere musen,"

#: ../../mouse.pm_.c:484
msgid "MOVE YOUR WHEEL!"
msgstr "FLYT P� HJULET!"

#: ../../my_gtk.pm_.c:380
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../my_gtk.pm_.c:415
msgid "Finish"
msgstr "Afslut"

#: ../../my_gtk.pm_.c:415
msgid "Next ->"
msgstr "N�ste ->"

#: ../../my_gtk.pm_.c:416
msgid "<- Previous"
msgstr "<- Forrige"

#: ../../my_gtk.pm_.c:716
msgid "Is this correct?"
msgstr "Er dette korrekt?"

#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Lav forbindelse til Internettet"

#: ../../network/adsl.pm_.c:20
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Den mest almindelige m�de at forbinde med ADSL er pppoe.\n"
"Nogen forbindelser bruger pptp, og nogle f� bruger DHCP.\n"
"Hvis du ikke ved noget, v�lg 'brug pppoe'"

#: ../../network/adsl.pm_.c:22
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: ../../network/adsl.pm_.c:22
msgid "use dhcp"
msgstr "brug dhcp"

#: ../../network/adsl.pm_.c:22
msgid "use pppoe"
msgstr "brug pppoe"

#: ../../network/adsl.pm_.c:22
msgid "use pptp"
msgstr "brug pptp"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcpcd"
msgstr ""
"Hvilken DHCP klient �nsker du at bruge?\n"
"Standard er dhcpcd"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Der blev ikke fundet nogen ethernet netv�rksadapter p� dit system.\n"
"Kan ikke s�tte denne forbindelsetype op."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:233
msgid "Choose the network interface"
msgstr "V�lg netv�rksgr�nsesnit"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr ""
"V�lg venligst hvilken netv�rksadapter du �nsker at bruge til at lave "
"forbindelse til Internettet med."

#: ../../network/ethernet.pm_.c:178
msgid "no network card found"
msgstr "kunne ikke finde noget netkort"

#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:350
msgid "Configuring network"
msgstr "Konfigurerer netv�rk"

#: ../../network/ethernet.pm_.c:203
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Indtast venligst v�rtsnavn hvis du kender det.\n"
"Nogle DHCP-servere kr�ver v�rtsnavnet for at fungere.\n"
"Dit v�rtsnavn b�r v�re et fuldt kvalificeret v�rtsnavn,\n"
"fx 'minpc.mitfirma.dk'."

#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:355
msgid "Host name"
msgstr "V�rtsnavn"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:91 ../../network/netconnect.pm_.c:105
#: ../../network/netconnect.pm_.c:154 ../../network/netconnect.pm_.c:164
#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:213
#: ../../network/netconnect.pm_.c:221
msgid "Network Configuration Wizard"
msgstr "Konfigur�r netv�rk"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "Eksternt ISDN modem"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Internt ISDN-kort"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Hvad slags type er din ISDN-forbindelse?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerfull\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""
"Hvilken ISDN-konfigurering foretr�kker du?\n"
"\n"
"* Den gamle konfiguration bruger isdn4net. Det har st�rke\n"
"  v�rkt�jer, men det er vanskeligt at konfigurere for en nybegynder,\n"
"  og er ikke standardbaseret.\n"
"\n"
"' Det nye konfigurationsv�rkt�j er enklere at forst�,\n"
"  mere standardiseret, men med f�rre v�rkt�jer.\n"
"\n"
"Vi anbefaler den nye konfiguration.\n"
"\n"

#: ../../network/isdn.pm_.c:54
msgid "New configuration (isdn-light)"
msgstr "Ny konfiguration (isdn-light)"

#: ../../network/isdn.pm_.c:54
msgid "Old configuration (isdn4net)"
msgstr "Gammel konfiguration (isdn4net)"

#: ../../network/isdn.pm_.c:169 ../../network/isdn.pm_.c:187
#: ../../network/isdn.pm_.c:197 ../../network/isdn.pm_.c:204
#: ../../network/isdn.pm_.c:214
msgid "ISDN Configuration"
msgstr "ISDN konfiguration"

#: ../../network/isdn.pm_.c:169
msgid ""
"Select your provider.\n"
" If it's not in the list, choose Unlisted"
msgstr ""
"V�lg din udbyder.\n"
" Hvis de ikke er i listen, v�lg Ikke listet"

#: ../../network/isdn.pm_.c:182
msgid "Europe protocol"
msgstr "Europaprotokollen"

#: ../../network/isdn.pm_.c:182
msgid "Europe protocol (EDSS1)"
msgstr "Protokol for Europa (EDSS1)"

#: ../../network/isdn.pm_.c:184
msgid "Protocol for the rest of the world"
msgstr "Protokol for resten af verden"

#: ../../network/isdn.pm_.c:184
msgid ""
"Protocol for the rest of the world \n"
" no D-Channel (leased lines)"
msgstr ""
"Protokol for resten af verden \n"
" ingen D-kanal (lejet linje)"

#: ../../network/isdn.pm_.c:188
msgid "Which protocol do you want to use ?"
msgstr "Hvilken protokol �nsker du at bruge?"

#: ../../network/isdn.pm_.c:198
msgid "What kind of card do you have?"
msgstr "Hvad slags kort har du?"

#: ../../network/isdn.pm_.c:199
msgid "I don't know"
msgstr "Det ved jeg ikke"

#: ../../network/isdn.pm_.c:199
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:199
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:205
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
msgstr ""
"\n"
"Hvis du har et ISA kort burde v�rdiene i n�ste billede v�re rigtige.\n"
"\n"
"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"

#: ../../network/isdn.pm_.c:209
msgid "Abort"
msgstr "Afbryd"

#: ../../network/isdn.pm_.c:209
msgid "Continue"
msgstr "Forts�t"

#: ../../network/isdn.pm_.c:215
msgid "Which is your ISDN card ?"
msgstr "Hvilket er dit ISDN-kort?"

#: ../../network/isdn.pm_.c:234
msgid ""
"I have detected an ISDN PCI Card, but I don't know the type. Please select "
"one PCI card on the next screen."
msgstr ""
"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. V�lg "
"venligst et PCI-kort i n�ste sk�rmbillede."

#: ../../network/isdn.pm_.c:243
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Ingen ISDN PCI-kort fundet. V�lg venligst �t i n�ste sk�rmbillede."

#: ../../network/modem.pm_.c:37
msgid "Please choose which serial port your modem is connected to."
msgstr "Angiv venligst hvilken seriel port dit modem er forbundet til."

#: ../../network/modem.pm_.c:42
msgid "Dialup options"
msgstr "Opkaldsindstillinger"

#: ../../network/modem.pm_.c:43 ../../standalone/draknet_.c:600
msgid "Connection name"
msgstr "Navn p� forbindelsen"

#: ../../network/modem.pm_.c:44 ../../standalone/draknet_.c:601
msgid "Phone number"
msgstr "Telefonnummer"

#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:602
msgid "Login ID"
msgstr "Login id"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Script-based"
msgstr "Skript-baseret"

#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:604
msgid "Terminal-based"
msgstr "Terminal-baseret"

#: ../../network/modem.pm_.c:48 ../../standalone/draknet_.c:605
msgid "Domain name"
msgstr "Dom�nenavn"

#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:606
msgid "First DNS Server (optional)"
msgstr "F�rste DNS-server (valgfri)"

#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:607
msgid "Second DNS Server (optional)"
msgstr "Anden DNS-server (valgfri)"

#: ../../network/netconnect.pm_.c:33
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
"forbindelse."

#: ../../network/netconnect.pm_.c:33 ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"Du kan genkonfigurere din forbindelse"

#: ../../network/netconnect.pm_.c:33
msgid "You are currently connected to internet."
msgstr "Du har forbindelse til Internettet nu."

#: ../../network/netconnect.pm_.c:36
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."

#: ../../network/netconnect.pm_.c:36
msgid "You are not currently connected to Internet."
msgstr "Du er ikke forbundet til Internettet nu."

#: ../../network/netconnect.pm_.c:40
msgid "Connect to Internet"
msgstr "Lav forbindelse til Internettet"

#: ../../network/netconnect.pm_.c:42
msgid "Disconnect from Internet"
msgstr "Luk forbindelse til Internettet"

#: ../../network/netconnect.pm_.c:44
msgid "Configure network connection (LAN or Internet)"
msgstr "Konfigur�r netv�rksforbindelse (LAN eller Internet)"

#: ../../network/netconnect.pm_.c:47
msgid "Internet connection & configuration"
msgstr "Internetforbindelse & -konfiguration"

#: ../../network/netconnect.pm_.c:96
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Vi skal nu konfigurere %s-opkoblingen."

#: ../../network/netconnect.pm_.c:105
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Vi skal nu konfigurere %s opkoblingen.\n"
"\n"
"\n"
"Tryk OK for at begynde."

#: ../../network/netconnect.pm_.c:129 ../../network/netconnect.pm_.c:243
#: ../../network/netconnect.pm_.c:255 ../../network/tools.pm_.c:56
msgid "Network Configuration"
msgstr "Konfigur�r netv�rk"

#: ../../network/netconnect.pm_.c:130
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Da du er i gang med en netv�rksinstallation er dit netv�rk "
"alleredekonfigureret.\n"
"Klik OK for at beholde din konfiguration, eller annull�r for at "
"omkonfigureredin Internet- og netv�rksforbindelse.\n"

#: ../../network/netconnect.pm_.c:155
msgid ""
"Welcome to The Network Configuration Wizard\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Velkommen til Netv�rkskonfigurationen\n"
"\n"
"Vi skal til at konfigurere din internet- eller netv�rksforbindelse.\n"
"Hvis du ikke �nsker at bruge autodetektering s� frav�lg afkrydsningsboksen\n"

#: ../../network/netconnect.pm_.c:157
msgid "Choose the profile to configure"
msgstr "V�lg profilen der skal konfigureres"

#: ../../network/netconnect.pm_.c:158
msgid "Use auto detection"
msgstr "Brug automatisk detektion"

#: ../../network/netconnect.pm_.c:164
msgid "Detecting devices..."
msgstr "Detekterer enheder..."

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
msgid "Normal modem connection"
msgstr "Normal modemforbindelse"

#: ../../network/netconnect.pm_.c:175 ../../network/netconnect.pm_.c:184
#, c-format
msgid "detected on port %s"
msgstr "Detekteret p� port %s"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
msgid "ISDN connection"
msgstr "ISDN-forbindelse"

#: ../../network/netconnect.pm_.c:176 ../../network/netconnect.pm_.c:185
#, c-format
msgid "detected %s"
msgstr "Detekteret %s"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
msgid "ADSL connection"
msgstr "ADSL opkobling"

#: ../../network/netconnect.pm_.c:177 ../../network/netconnect.pm_.c:186
#, c-format
msgid "detected on interface %s"
msgstr "Detekteret p� gr�nseflade %s"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "Cable connection"
msgstr "Kabelforbindelse"

#: ../../network/netconnect.pm_.c:178 ../../network/netconnect.pm_.c:187
msgid "cable connection detected"
msgstr "Kabelopkobling detekteret"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "LAN connection"
msgstr "Lokalnet-konfiguration"

#: ../../network/netconnect.pm_.c:179 ../../network/netconnect.pm_.c:188
msgid "ethernet card(s) detected"
msgstr "ethernet-kort detekteret"

#: ../../network/netconnect.pm_.c:190
msgid "Choose the connection you want to configure"
msgstr "V�lg den opkobling, du �nsker at konfigurere"

#: ../../network/netconnect.pm_.c:214
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Du har konfigureret flere m�der at koble dig mod internet p�.\n"
"Venligst v�lg den du �nsker at bruger.\n"
"\n"

#: ../../network/netconnect.pm_.c:215
msgid "Internet connection"
msgstr "Internet opkobling"

#: ../../network/netconnect.pm_.c:221
msgid "Do you want to start the connection at boot?"
msgstr "�nsker du at starte din forbindelse ved opstart?"

#: ../../network/netconnect.pm_.c:239
msgid "Network configuration"
msgstr "Netv�rks konfiguration"

#: ../../network/netconnect.pm_.c:240
msgid "The network needs to be restarted"
msgstr "Netv�rket skal startes op igen"

#: ../../network/netconnect.pm_.c:243
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Et problem opstod ved genstart af netv�rket: \n"
"\n"
"%s"

#: ../../network/netconnect.pm_.c:247
msgid ""
"Congratulations, the network and internet configuration is finished.\n"
"\n"
"The configuration will now be applied to your system.\n"
msgstr ""
"Tillykke, netv�rks- og internetkonfigurationen er f�rdig.\n"
"\n"
"Konfigurationen vil nu blive anvendt p� dit system.\n"

#: ../../network/netconnect.pm_.c:250
msgid ""
"After that is done, we recommend you to restart your X\n"
"environnement to avoid hostname changing problem."
msgstr ""
"Derefter anbefaler vi at du genstarter dit X-milj� for\n"
"at undg� problemer med det �ndrede v�rtsnavn"

#: ../../network/network.pm_.c:283
msgid ""
"WARNING: This device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
"forbindelse til Internettet.\n"
"Ved kun at trykke p� OK beholder du den nuv�rende konfiguration.\n"
"�ndringer i felterne nedenunder vil overskrive denne konfiguration."

#: ../../network/network.pm_.c:288
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."

#: ../../network/network.pm_.c:297 ../../network/network.pm_.c:298
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigurerer netv�rksenheden %s"

#: ../../network/network.pm_.c:298
#, c-format
msgid " (driver %s)"
msgstr " (drivprogram %s)"

#: ../../network/network.pm_.c:300 ../../standalone/draknet_.c:255
#: ../../standalone/draknet_.c:461
msgid "IP address"
msgstr "IP-adresse"

#: ../../network/network.pm_.c:301 ../../standalone/draknet_.c:462
msgid "Netmask"
msgstr "Netmaske"

#: ../../network/network.pm_.c:302
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:302
msgid "Automatic IP"
msgstr "Automatisk IP"

#: ../../network/network.pm_.c:323 ../../printerdrake.pm_.c:406
msgid "IP address should be in format 1.2.3.4"
msgstr "IP adresse skal have formatet 1.2.3.4"

#: ../../network/network.pm_.c:351
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Indtast dom�nenavn, v�rtsnavn og IP adressen for evt. ekstra navne-servere.\n"
"Dit v�rtsnavn skal v�re et fuldt kvalificeret v�rtsnavn inklusive dom�ne,\n"
"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
"s� lad navne-server-felterne v�re blanke."

#: ../../network/network.pm_.c:356
msgid "DNS server"
msgstr "DNS-server"

#: ../../network/network.pm_.c:357 ../../standalone/draknet_.c:599
msgid "Gateway"
msgstr "Gateway"

#: ../../network/network.pm_.c:359
msgid "Gateway device"
msgstr "Gateway enhed"

#: ../../network/network.pm_.c:371
msgid "Proxies configuration"
msgstr "Konfiguration af mellemv�rt (proxy)"

#: ../../network/network.pm_.c:372
msgid "HTTP proxy"
msgstr "HTTP-mellemv�rt"

#: ../../network/network.pm_.c:373
msgid "FTP proxy"
msgstr "FTP-mellemv�rt"

#: ../../network/network.pm_.c:374
msgid "Track network card id (usefull for laptops)"
msgstr "F�lg id for netv�rkskort (nyttigt for b�rbare)"

#: ../../network/network.pm_.c:377
msgid "Proxy should be http://..."
msgstr "Proxy skal v�re http://..."

#: ../../network/network.pm_.c:378
msgid "Proxy should be ftp://..."
msgstr "Proxy skal v�re ftp://..."

#: ../../network/tools.pm_.c:38
msgid "Internet configuration"
msgstr "Internet-konfiguration"

#: ../../network/tools.pm_.c:39
msgid "Do you want to try to connect to the Internet now?"
msgstr "�nsker du at fors�ge at skabe forbindelse til Internettet nu?"

#: ../../network/tools.pm_.c:43 ../../standalone/draknet_.c:189
msgid "Testing your connection..."
msgstr "Tester din forbindelse..."

#: ../../network/tools.pm_.c:49 ../../standalone/draknet_.c:220
msgid "The system is now connected to Internet."
msgstr "Systemet er ikke forbundet til Internettet nu."

#: ../../network/tools.pm_.c:50
msgid "For Security reason, it will be disconnected now."
msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."

#: ../../network/tools.pm_.c:51 ../../standalone/draknet_.c:220
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Det lader ikke til at dit system har forbindelse til Internettet.\n"
"Pr�v at omkonfigurere din forbindelse."

#: ../../network/tools.pm_.c:75
msgid "Connection Configuration"
msgstr "Forbindelses-konfiguration"

#: ../../network/tools.pm_.c:76
msgid "Please fill or check the field below"
msgstr "Udfyld eller mark�r venligst feltet nedenunder"

#: ../../network/tools.pm_.c:78 ../../standalone/draknet_.c:586
msgid "Card IRQ"
msgstr "Kort IRQ"

#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:587
msgid "Card mem (DMA)"
msgstr "Kort mem (DMA)"

#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:588
msgid "Card IO"
msgstr "Kort IO"

#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:589
msgid "Card IO_0"
msgstr "Kort IO_0"

#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:590
msgid "Card IO_1"
msgstr "Kort IO_1"

#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:591
msgid "Your personal phone number"
msgstr "Dit personlige telefonnummer"

#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:592
msgid "Provider name (ex provider.net)"
msgstr "Navn p� udbyder (f.eks. udbyder.net)"

#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:593
msgid "Provider phone number"
msgstr "Udbyders telefonnummer"

#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:594
msgid "Provider dns 1 (optional)"
msgstr "Udbyder DNS 1 (valgfri)"

#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:595
msgid "Provider dns 2 (optional)"
msgstr "Udbyder DNS 2 (valgfri)"

#: ../../network/tools.pm_.c:88
msgid "Choose your country"
msgstr "V�lg dit land"

#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:598
msgid "Dialing mode"
msgstr "Opringningsm�de"

#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:610
msgid "Connection speed"
msgstr "Opkoblingshastighed"

#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:611
msgid "Connection timeout (in sec)"
msgstr "Opkoblingens tidsudl�b (i sekunder)"

#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:596
msgid "Account Login (user name)"
msgstr "Konto-login (brugernavn)"

#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:597
msgid "Account Password"
msgstr "Kodeord for konto"

#: ../../partition_table.pm_.c:622
msgid "Extended partition not supported on this platform"
msgstr "Udvidet partition ikke underst�ttet p� denne platform"

#: ../../partition_table.pm_.c:640
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""
"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
"Den eneste l�sning er at flytte dine prim�re partitioner, s�ledes at\n"
"\"hullet\" bliver placeret ved siden af de udvidede partitioner."

#: ../../partition_table.pm_.c:744
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Genskabning fra fil %s mislykkedes: %s"

#: ../../partition_table.pm_.c:746
msgid "Bad backup file"
msgstr "Fejl i sikkerhedskopien"

#: ../../partition_table.pm_.c:768
#, c-format
msgid "Error writing to file %s"
msgstr "Fejl ved skrivning til fil %s"

#: ../../partition_table_raw.pm_.c:154
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Noget slemt sker p� dit drev. \n"
"En test for at tjekke integriteten af data er mislykkedes. \n"
"Dette betyder at alt p� disken vil ende som tilf�ldigt snavs"

#: ../../pkgs.pm_.c:24
msgid "must have"
msgstr "skal have"

#: ../../pkgs.pm_.c:25
msgid "important"
msgstr "vigtigt"

#: ../../pkgs.pm_.c:26
msgid "very nice"
msgstr "meget rart"

#: ../../pkgs.pm_.c:27
msgid "nice"
msgstr "rart"

#: ../../pkgs.pm_.c:28
msgid "maybe"
msgstr "m�ske"

#: ../../printer.pm_.c:23
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: ../../printer.pm_.c:24
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: ../../printer.pm_.c:25
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer D�mon"

#: ../../printer.pm_.c:26
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: ../../printer.pm_.c:32
msgid "CUPS"
msgstr "CUPS"

#: ../../printer.pm_.c:33
msgid "LPRng"
msgstr "LPRng"

#: ../../printer.pm_.c:34
msgid "LPD"
msgstr "LPD"

#: ../../printer.pm_.c:35
msgid "PDQ"
msgstr "PDQ"

#: ../../printer.pm_.c:40
msgid "Local printer"
msgstr "Lokal printer"

#: ../../printer.pm_.c:41
msgid "Remote printer"
msgstr "Ekstern printer"

#: ../../printer.pm_.c:42
msgid "Printer on remote CUPS server"
msgstr "Printer p� ekstern CUPS tjener"

#: ../../printer.pm_.c:43
msgid "Printer on remote lpd server"
msgstr "Printer p� ekstern lpd tjener"

#: ../../printer.pm_.c:44
msgid "Network printer (socket)"
msgstr "Netv�rksprinter (sokkel)"

#: ../../printer.pm_.c:45
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Printer p� SMB/Windows 95/98/NT server"

#: ../../printer.pm_.c:46
msgid "Printer on NetWare server"
msgstr "Printer p� en NetWare tjener"

#: ../../printer.pm_.c:47
msgid "Enter a printer device URI"
msgstr "Indtast en skriverenheds-URI"

#: ../../printer.pm_.c:48
msgid "Pipe job into a command"
msgstr "kanalis�r opgave ind i kommando"

#: ../../printer.pm_.c:418 ../../printer.pm_.c:839
#: ../../printerdrake.pm_.c:1227 ../../printerdrake.pm_.c:2023
msgid "Unknown model"
msgstr "Ukendt model"

#: ../../printer.pm_.c:546 ../../printerdrake.pm_.c:790
msgid "Raw printer (No driver)"
msgstr "R� printer (ingen driver)"

#: ../../printer.pm_.c:693
#, c-format
msgid "(on %s)"
msgstr "(p� %s)"

#: ../../printer.pm_.c:695
msgid "(on this machine)"
msgstr "(p� denne maskine)"

#: ../../printerdrake.pm_.c:22
msgid "Select Printer Connection"
msgstr "V�lg printer-forbindelse"

#: ../../printerdrake.pm_.c:23
msgid "How is the printer connected?"
msgstr "Hvordan er printeren tilsluttet?"

#: ../../printerdrake.pm_.c:25
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure\n"
"here; these printers will be automatically detected. Please\n"
"select \"Printer on remote CUPS server\" in this case."
msgstr ""
"\n"
"Med en ekstern CUPS server beh�ver du ikke at konfigurere\n"
"nogen printere; printere vil automatisk blive fundet.\n"
"V�lg venligst \"Ekstern CUPS server\" i dette tilf�lde."

#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:88
#: ../../printerdrake.pm_.c:89 ../../printerdrake.pm_.c:159
msgid "None"
msgstr "Ingenting"

#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:160
msgid "Choose a default printer!"
msgstr "V�lg en forvalgt printer!"

#: ../../printerdrake.pm_.c:105
msgid ""
"With remote CUPS servers, you do not have to configure any \n"
"printer here; CUPS servers inform your machine automatically\n"
"about their printers. All printers known to your machine\n"
"currently are listed in the \"Default printer\" field. Choose\n"
"the default printer for your machine there and click the\n"
"\"Apply/Re-read printers\" button. Click the same button to\n"
"refresh the list (it can take up to 30 seconds after the start\n"
"of CUPS until all remote printers are visible).\n"
"When your CUPS server is in a different network, you have to \n"
"give the CUPS server IP address and optionally the port number\n"
"to get the printer information from the server, otherwise leave\n"
"these fields blank."
msgstr ""
"Med en ekstern CUPS-tjener beh�ver du ikke at konfigurere nogen\n"
"skrivere her; CUPS-tjenere giver din maskine information om \n"
"skriverne automatisk. Alle skrivere som for �jeblikket er kendt\n"
"for din maskine vil v�re under \"Standardskriver\". V�lg standard-\n"
"skriveren du �nsker, og klik p� \"Brug/L�s skriverlisten\"-knappen. \n"
"Tryk p� den samme liste for at opfriske listen. (det kan tage op til 30\n"
"sekunder fra CUPS starter til alle skrivere er tilg�ngelige).\n"
"N�r din CUPS-tjener er p� et andet netv�rk skal du opgive\n"
"CUPS-tjenerens IP-adresse og eventuelle portnummer for at f�\n"
"skriverinformation fra tjeneren, ellers kan du lade disse felter v�re blanke."

#: ../../printerdrake.pm_.c:117
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your\n"
"network environment, so that you can access the printers on the\n"
"CUPS servers in your local network. If this does not work \n"
"correctly, turn off \"Automatic CUPS configuration\" and edit\n"
"your file /etc/cups/cupsd.conf manually. Do not forget to restart\n"
"CUPS afterwards (command: \"service cups restart\")."
msgstr ""
"\n"
"Normalt bliver CUPS konfigureret automatisk i overensstemmelse med dit\n"
"netv�rksmilj�, s� du kan f� fat i printerne p� CUPS-serverne p� dit\n"
"lokalnetv�rk. Hvis dette ikke virker ordentligt, s� deaktiv�r\n"
"'Automatisk CUPS-konfiguration' og redig�r din fil\n"
"/etc/cups/cupsd.conf selv. Glem ikke at genstarte CUPS bagefter.\n"
"(kommando: 'service cups restart')."

#: ../../printerdrake.pm_.c:124 ../../printerdrake.pm_.c:1290
#: ../../printerdrake.pm_.c:1294 ../../printerdrake.pm_.c:1295
#: ../../printerdrake.pm_.c:1296 ../../printerdrake.pm_.c:2011
msgid "Close"
msgstr "Luk"

#: ../../printerdrake.pm_.c:125
msgid "Apply/Re-read printers"
msgstr "Brug/Opfrisk skriverliste"

#: ../../printerdrake.pm_.c:129
msgid "The IP address should look like 192.168.1.20"
msgstr "IP-adressen b�r se ud som 192.168.1.20"

#: ../../printerdrake.pm_.c:134 ../../printerdrake.pm_.c:541
msgid "The port number should be an integer!"
msgstr "Port-nummeret b�r v�re et heltal!"

#: ../../printerdrake.pm_.c:141 ../../printerdrake.pm_.c:2095
msgid "Default printer"
msgstr "Standard printer"

#: ../../printerdrake.pm_.c:146
msgid "CUPS server IP"
msgstr "CUPS-serverens IP"

#: ../../printerdrake.pm_.c:147 ../../printerdrake.pm_.c:534
msgid "Port"
msgstr "Port"

#: ../../printerdrake.pm_.c:149
msgid "Automatic CUPS configuration"
msgstr "Automatisk CUPS-konfiguration"

#: ../../printerdrake.pm_.c:217
msgid "Detecting devices ..."
msgstr "Detekterer enheder..."

#: ../../printerdrake.pm_.c:217
msgid "Test ports"
msgstr "Afpr�v porte"

#: ../../printerdrake.pm_.c:238
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr "En printer, model \"%s\" er blevet fundet p� "

#: ../../printerdrake.pm_.c:255
msgid "Local Printer Device"
msgstr "Lokal Printer"

#: ../../printerdrake.pm_.c:256
msgid ""
"What device is your printer connected to \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""
"Hvilken enhed er printeren forbundet til \n"
"(bem�rk at /dev/lp0 er det samme som LPT1:-)?\n"

#: ../../printerdrake.pm_.c:258
msgid "Printer Device"
msgstr "Printer-enhed"

#: ../../printerdrake.pm_.c:261
msgid "Device/file name missing!"
msgstr "Enheds/filnavn mangler!"

#: ../../printerdrake.pm_.c:274 ../../printerdrake.pm_.c:698
#: ../../printerdrake.pm_.c:786
msgid "Reading printer database ..."
msgstr "L�ser database over skrivere: ..."

#: ../../printerdrake.pm_.c:312
msgid "Remote lpd Printer Options"
msgstr "Parametre til ekstern lpd"

#: ../../printerdrake.pm_.c:313
msgid ""
"To use a remote lpd printer, you need to supply\n"
"the hostname of the printer server and the printer name\n"
"on that server."
msgstr ""
"For at bruge en ekstern lpd skriverk�, skal du opgive v�rtsnavnet\n"
"p� skrivertjeneren og k�navnet p� den tjener som\n"
"opgaverne skal placeres i."

#: ../../printerdrake.pm_.c:316
msgid "Remote host name"
msgstr "Eksternt v�rtsnavn"

#: ../../printerdrake.pm_.c:317
msgid "Remote printer name"
msgstr "Eksternt printernavn"

#: ../../printerdrake.pm_.c:320
msgid "Remote host name missing!"
msgstr "Eksternt v�rtsnavn mangler"

#: ../../printerdrake.pm_.c:324
msgid "Remote printer name missing!"
msgstr "Det eksterne v�rtsnavn mangler!"

#: ../../printerdrake.pm_.c:392
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT)-printer indstillinger"

#: ../../printerdrake.pm_.c:393
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""
"For at skrive til en SMB printer, skal du angive navnet p� SMB maskinen\n"
"(bem�rk at dette navn kan v�re forskelligt fra TCP/IP-navnet!) og\n"
"muligvis IP-adressen p� printerserveren. Ydermere skal du angive\n"
"k�navnet for printeren, brugernavn, adgangskode og information for\n"
"arbejdsgruppen."

#: ../../printerdrake.pm_.c:398
msgid "SMB server host"
msgstr "SMB-serverv�rt"

#: ../../printerdrake.pm_.c:399
msgid "SMB server IP"
msgstr "SMB-serverens IP"

#: ../../printerdrake.pm_.c:400
msgid "Share name"
msgstr "Dele-navn"

#: ../../printerdrake.pm_.c:403
msgid "Workgroup"
msgstr "Arbejdsgruppe"

#: ../../printerdrake.pm_.c:410
msgid "Either the server name or the server's IP must be given!"
msgstr "Enten servernavnet eller serverens IP skal angives!"

#: ../../printerdrake.pm_.c:414
msgid "Samba share name missing!"
msgstr "Samba-delenavn mangler!"

#: ../../printerdrake.pm_.c:473
msgid "NetWare Printer Options"
msgstr "NetWare printer-parametre"

#: ../../printerdrake.pm_.c:474
msgid ""
"To print on a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""
"For at skrive til en NetWare printer skal du angive navnet p� NetWare\n"
"printerserveren (bem�rk at dette navn kan v�re forskelligt fra\n"
"TCP/IP-navnet!) s�vel som k�navnet for den printer du vil benytte\n"
"og et brugernavn samt en adgangskode."

#: ../../printerdrake.pm_.c:478
msgid "Printer Server"
msgstr "Printer-server"

#: ../../printerdrake.pm_.c:479
msgid "Print Queue Name"
msgstr "Printerk�-navn"

#: ../../printerdrake.pm_.c:484
msgid "NCP server name missing!"
msgstr "NCP-servernavn mangler!"

#: ../../printerdrake.pm_.c:488
msgid "NCP queue name missing!"
msgstr "NCP-k�navn mangler!"

#: ../../printerdrake.pm_.c:527
msgid "Socket Printer Options"
msgstr "Sokkel-printer-parametre"

#: ../../printerdrake.pm_.c:528
msgid ""
"To print to a socket printer, you need to provide the\n"
"host name of the printer and optionally the port number.\n"
"On HP JetDirect servers the port number is usually 9100,\n"
"on other servers it can vary. See the manual of your\n"
"hardware."
msgstr ""
"For at skrive til en sokkel-skriver, skal du angive\n"
"v�rtsnavnet p� skriveren, og eventuelt portnummer.\n"
"P� en HP JetDirect-tjener er portnummeret normalt\n"
"9100, p� andre tjenere varierer det. Tjek manualen til\n"
"din tjener."

#: ../../printerdrake.pm_.c:533
msgid "Printer host name"
msgstr "printer-v�rtsnavn"

#: ../../printerdrake.pm_.c:537
msgid "Printer host name missing!"
msgstr "printer-v�rtsnavn mangler!"

#: ../../printerdrake.pm_.c:566 ../../printerdrake.pm_.c:568
msgid "Printer Device URI"
msgstr "Printer-enheds URI"

#: ../../printerdrake.pm_.c:567
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Du kan direkte opgive URI til skriveren. URIen skal v�re i henhold til enten "
"CUPS- eller Foomatic-standarden. Bem�rk at ikke alle typer URIer "
"underst�ttes af alle k�-behandlere."

#: ../../printerdrake.pm_.c:582
msgid "A valid URI must be entered!"
msgstr "En korrekt URI skal opgives!"

#: ../../printerdrake.pm_.c:682
msgid ""
"Every printer needs a name (for example lp).\n"
"The Description and Location fields do not need \n"
"to be filled in. They are comments for the users."
msgstr ""
"Alle skrivere beh�ver et navn (f.eks. lp).\n"
"Beskrivelsen og lokaliseringsfelterne beh�ver ikke \n"
"at fyldes ind. De er kommentarer til brugerne."

#: ../../printerdrake.pm_.c:685
msgid "Name of printer"
msgstr "Navn p� printer"

#: ../../printerdrake.pm_.c:686
msgid "Description"
msgstr "Beskrivelse"

#: ../../printerdrake.pm_.c:687
msgid "Location"
msgstr "Placering"

#: ../../printerdrake.pm_.c:701
msgid "Preparing printer database ..."
msgstr "Forbereder skriverdatabase: ..."

#: ../../printerdrake.pm_.c:793
msgid "Printer model selection"
msgstr "Valg af printermodel"

#: ../../printerdrake.pm_.c:794
msgid "Which printer model do you have?"
msgstr "Hvilken printermodel har du?"

#: ../../printerdrake.pm_.c:866
msgid "OKI winprinter configuration"
msgstr "OKI konfiguration af winprinter"

#: ../../printerdrake.pm_.c:867
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they\n"
"work only when connected to the first parallel port. When\n"
"your printer is connected to another port or to a print\n"
"server box please connect the printer to the first parallel\n"
"port before you print a test page. Otherwise the printer\n"
"will not work. Your connection type setting will be ignored\n"
"by the driver."
msgstr ""
"Du konfigurerer en OKI laser-winprinter. Disse printere\n"
"bruger en meget speciel kommunikationsprotokol og derfor virker\n"
"de kun n�r de er forbundet til den f�rste parallelle port. N�r\n"
"din printer er forbundet til en anden port eller til en\n"
"printserverboks, s� forbind venligst printeren til den f�rste\n"
"parallelle port f�r du udskriver en pr�veside. Ellers vil printeren\n"
"ikke virke. Din ops�tning af forbindelsestype vil blive ignoreret\n"
"af driveren."

#: ../../printerdrake.pm_.c:916 ../../printerdrake.pm_.c:946
msgid "Lexmark inkjet configuration"
msgstr "Lexmark inkjet konfiguration"

#: ../../printerdrake.pm_.c:917
msgid ""
"The inkjet printer drivers provided by Lexmark only support\n"
"local printers, no printers on remote machines or print server\n"
"boxes. Please connect your printer to a local port or\n"
"configure it on the machine where it is connected to."
msgstr ""
"Printerdriverne til inkjet som leveres af Lexmark underst�tter\n"
"kun lokale printere, ikke printere p� eksterne maskiner eller\n"
"printserverbokse. Forbind venligst din printer til en lokal port\n"
"eller konfigurer den p� den maskine, den er forbundet til."

#: ../../printerdrake.pm_.c:947
msgid ""
"To be able to print with your Lexmark inkjet and this\n"
"configuration, you need the inkjet printer drivers\n"
"provided by Lexmark (http://www.lexmark.com/). Go to\n"
"the US site and click on the \"Drivers\" button. Then\n"
"choose your model and afterwards \"Linux\" as\n"
"operating system. The drivers come as RPM packages\n"
"or shell scripts with interactive graphical installation.\n"
"You do not need to do this configuration by the\n"
"graphical frontends. Cancel directly after the license\n"
"agreement. Then print printhead alignment pages with\n"
"\"lexmarkmaintain\" and adjust the head alignment\n"
"settings with this program."
msgstr ""
"For at kunne udskrive p� din Lexmark inkjet fra denne\n"
"konfigurering skal du bruge inkjet printerdriverne\n"
"leveret af Lexmark (http://www.lexmark.com/). G� til\n"
"webstedet i USA og klik p� 'Drivers'-knappen. V�lg\n"
"s� din model og derefter 'Linux' som operativsystem.\n"
"Driverne kommer som RPM-pakker eller skal-skripter\n"
"med interaktiv grafisk installation. Du beh�ver ikke\n"
"lave denne konfiguration via de grafiske gr�nseflader.\n"
"Annull�r direkte efter licensaftalen. Udskriv derefter\n"
"justeringsider for skrivehovedet med 'lexmarkmaintain',\n"
"og just�r ops�tningen af justeringen af hovedet med dette\n"
"program."

#: ../../printerdrake.pm_.c:1079
msgid ""
"Printer default settings\n"
"You should make sure that the page size and the\n"
"ink type (if available) are set correctly. Note\n"
"that with a very high printout quality printing\n"
"can get substantially slower."
msgstr ""
"Standardskriverens indstillinger\n"
"Du b�r tjekke at sidest�rrelsen og bl�ktypen\n"
"er sat rigtigt. Bem�rk at en meget god udskriftskvalitet\n"
"kan g�re udskriften langsommere."

#: ../../printerdrake.pm_.c:1090
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Valg %s skal v�re et helt tal!"

#: ../../printerdrake.pm_.c:1094
#, c-format
msgid "Option %s must be a number!"
msgstr "Valg %s skal v�re et tal!"

#: ../../printerdrake.pm_.c:1099
#, c-format
msgid "Option %s out of range!"
msgstr "Valg %s er udenfor omr�de!"

#: ../../printerdrake.pm_.c:1136
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"�nsker du fremover at bruge skriveren \"%s\"\n"
"som standard?"

#: ../../printerdrake.pm_.c:1152
msgid "Test pages"
msgstr "Testsider"

#: ../../printerdrake.pm_.c:1153
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed\n"
"and on laser printers with too low memory it can even not come out.\n"
"In most cases it is enough to print the standard test page."
msgstr ""
"Venligst v�lg testsiderne du �nsker at udskrive.\n"
"Bem�rk: fototestsiden kan tage lang tid at skrive ud,\n"
"og p� laserskrivere med for lidt hukommelse vil den m�ske ikke\n"
"skrives ud i det hele taget. Som regel vil det v�re nok at\n"
"udskrive standard-testsiden."

#: ../../printerdrake.pm_.c:1158
msgid "No test pages"
msgstr "Ingen testsider"

#: ../../printerdrake.pm_.c:1159
msgid "Print"
msgstr "Udskriv"

#: ../../printerdrake.pm_.c:1161
msgid "Standard test page"
msgstr "Standard testside"

#: ../../printerdrake.pm_.c:1164
msgid "Alternative test page (Letter)"
msgstr "Alternativ testside (letter)"

#: ../../printerdrake.pm_.c:1167
msgid "Alternative test page (A4)"
msgstr "Alternativ testside (A4)"

#: ../../printerdrake.pm_.c:1169
msgid "Photo test page"
msgstr "Fototestside"

#: ../../printerdrake.pm_.c:1175 ../../printerdrake.pm_.c:1297
msgid "Printing test page(s)..."
msgstr "Udskriver testside(r)..."

#: ../../printerdrake.pm_.c:1200
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Testsider er blevet sendt til printeren.\n"
"Dette kan tage lidt tid f�r printeren starter.\n"
"Udskrivningsstatus:\n"
"%s\n"
"\n"

#: ../../printerdrake.pm_.c:1204
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Testsider er sendt til printeren.\n"
"Det kan tage lidt tid f�r printeren starter.\n"

#: ../../printerdrake.pm_.c:1211
msgid "Did it work properly?"
msgstr "Fungerer det korrekt?"

#: ../../printerdrake.pm_.c:1229 ../../printerdrake.pm_.c:2025
msgid "Raw printer"
msgstr "R� printer"

#: ../../printerdrake.pm_.c:1237
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"qtcups <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"For at skrive en fil fra kommandolinjen (terminalvindoet) ken du enten bruge "
"programmet '%s <fil>' eller et grafisk printerv�rkt�j: 'xpp <fil>' eller "
"'qtcups <fil>'. De grafiske v�rkt�jer lader dig v�lge printeren og �ndre "
"indstillingerne p� en nem m�de.\n"

#: ../../printerdrake.pm_.c:1239
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Disse kommandoer kan du ogs� bruge fra 'udskrivningskommando'-feltet i "
"udskriftsdialogerne i mange programmer, men lad v�re med at angive filnavnet "
"her, fordi filen der skal udskrives leveres af programmet.\n"

#: ../../printerdrake.pm_.c:1242 ../../printerdrake.pm_.c:1254
#: ../../printerdrake.pm_.c:1266
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"'%s'-kommandoen tillader ogs� �ndring af indstillingsmulighederne for et "
"bestemt udskriftsjob. Tilf�j blot de �nskede indstillinger til "
"kommandolinjen, fx '%s <fil>\". "

#: ../../printerdrake.pm_.c:1244 ../../printerdrake.pm_.c:1284
msgid ""
"To get a list of the options available for the current printer read either "
"the list shown below or click on the \"Print option list\" button.\n"
"\n"
msgstr ""
"For at f� en liste af muligheder tilstede for den aktuelle printer kan du "
"enten l�se listen vist nedefor, eller klikke p� knappen 'liste med "
"printermuligheder'.\n"
"\n"

#: ../../printerdrake.pm_.c:1249 ../../printerdrake.pm_.c:1261
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
"kommandoen '%s <fil>'.\n"

#: ../../printerdrake.pm_.c:1251 ../../printerdrake.pm_.c:1263
#: ../../printerdrake.pm_.c:1275
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Denne kommando kan du ogs� bruge fra 'udskrivningskommando'-feltet i "
"udskriftsdialogerne i mange programmer, men lad v�re med at angive filnavnet "
"her, fordi filen der skal udskrives leveres af programmet.\n"

#: ../../printerdrake.pm_.c:1256 ../../printerdrake.pm_.c:1268
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button.\n"
"\n"
msgstr ""
"For at f� en liste af muligheder tilstede for den aktuelle printer kan du "
"klikke p� knappen 'liste med printermuligheder'.\n"
"\n"

#: ../../printerdrake.pm_.c:1273
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
"kommandoen '%s <fil>' eller '%s <fil>'.\n"

#: ../../printerdrake.pm_.c:1277
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Du kan ogs� bruge den grafiske gr�nseflade 'xpdq' til at s�tte "
"valgmuligheder og behandle udskriftsopgaver.\n"
"Hvis du bruger KDE som skrivebordsmilj�, har du en 'panik-knap', en ikon p� "
"skrivebordet, ben�vnt med 'STOP printer!', som stopper alle udskriftsopgaver "
"�jeblikkeligt n�r du klikker p� den. Dette er fx nyttigt hvis papiret "
"kr�ller sammen.\n"

#: ../../printerdrake.pm_.c:1281
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"'%s'- og '%s'-kommandoerne tillader ogs� �ndring af indstillingsmulighederne "
"for et bestemt udskriftsjob. Tilf�j blot de �nskede indstillinger til "
"kommandolinjen, fx '%s <fil>'.\n"

#: ../../printerdrake.pm_.c:1292
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Udskriver p� printeren '%s'"

#: ../../printerdrake.pm_.c:1294
msgid "Print option list"
msgstr "Liste med printermuligheder"

#: ../../printerdrake.pm_.c:1318 ../../printerdrake.pm_.c:1741
#: ../../standalone/printerdrake_.c:48
msgid "Reading printer data ..."
msgstr "L�ser skriverdata: ..."

#: ../../printerdrake.pm_.c:1338 ../../printerdrake.pm_.c:1376
#: ../../printerdrake.pm_.c:1411
msgid "Transfer printer configuration"
msgstr "Overf�r skriverkonfiguration"

#: ../../printerdrake.pm_.c:1339
#, c-format
msgid ""
"You can copy the printer configuration which you have done \n"
"for the spooler %s to %s, your current spooler. All the\n"
"configuration data (printer name, description, location, \n"
"connection type, and default option settings) is overtaken,\n"
"but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following \n"
"reasons:\n"
msgstr ""
"Du kan kopiere skriverkonfigurationen du har sat op for k�tjeneren\n"
"%s til %s, din nuv�rende k�tjener. Al konfigurationsdata (skrivernavn,\n"
"beskrivelse, opkoblingstype og standardindstillinger) bliver overtaget, "
"men \n"
"ikke opgaver.\n"
"Ikke alle k�er kan overf�res p� grund af:\n"

#: ../../printerdrake.pm_.c:1347
msgid ""
"CUPS does not support printers on Novell servers or printers\n"
"sending the data into a free-formed command.\n"
msgstr ""
"CUPS underst�tter ikke skrivere p� Novelltjenere eller skrivere som\n"
"sender dataene ind i en frit-formet kommando.\n"

#: ../../printerdrake.pm_.c:1350
msgid ""
"PDQ only supports local printers, remote LPD printers, and\n"
"Socket/TCP printers.\n"
msgstr ""
"PDQ underst�tter kun lokale skrivere, eksterne LPD skrivere, og\n"
"Sokkel/TCP skrivere.\n"

#: ../../printerdrake.pm_.c:1353
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD og LPRng underst�tter ikke IPP skrivere.\n"

#: ../../printerdrake.pm_.c:1355
msgid ""
"In addition, queues not created with this program or\n"
"\"foomatic-configure\" cannot be transferred."
msgstr ""
"Desuden kan k�er lavet med dette program\n"
"eller \"foomatic -configure\" ikke overflyttes."

#: ../../printerdrake.pm_.c:1357
msgid ""
"\n"
"Also printers configured with the PPD files provided by\n"
"their manufacturers or with native CUPS drivers can not be\n"
"transferred."
msgstr ""
"\n"
"Skrivere konfigureret med PPD-filerne, som producenten har\n"
"lavet, eller med CUPS-drivere kan ikke overflyttes."

#: ../../printerdrake.pm_.c:1360
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"V�lg skriverene som du vil overflytte og klik\n"
"\"Overf�r\"."

#: ../../printerdrake.pm_.c:1363
msgid "Do not transfer printers"
msgstr "Overf�r ikke skrivere"

#: ../../printerdrake.pm_.c:1364 ../../printerdrake.pm_.c:1381
msgid "Transfer"
msgstr "Overf�r"

#: ../../printerdrake.pm_.c:1377
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"En skriver med navnet \"%s\" eksisterer allerede p� %s. \n"
"Klik \"Overf�r\" for at overskrive.\n"
"Du kan ogs� give et nyt skrivernavn, eller overspringe denne skriver."

#: ../../printerdrake.pm_.c:1385
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "Navn p� printer b�r kun indeholde bogstaver, tal og understregen _"

#: ../../printerdrake.pm_.c:1390
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Skriveren \"%s\" eksisterer allerede,\n"
"�nsker du virkelig at overskrive dens konfiguration?"

#: ../../printerdrake.pm_.c:1398
msgid "New printer name"
msgstr "Nyt skrivernavn"

#: ../../printerdrake.pm_.c:1401
#, c-format
msgid "Transferring %s ..."
msgstr "Overf�rer %s ..."

#: ../../printerdrake.pm_.c:1412
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"),\n"
"Should it be also the default printer under the\n"
"new printing system %s?"
msgstr ""
"Du har overf�rt din tidligere standard-printer '%s',\n"
"skal den ogs� v�re standard-printer under det nye\n"
"printersystem %s?"

#: ../../printerdrake.pm_.c:1423
msgid "Refreshing printer data ..."
msgstr "Opfrisker skriverdata ..."

#: ../../printerdrake.pm_.c:1431 ../../printerdrake.pm_.c:1494
#: ../../printerdrake.pm_.c:1515
msgid "Configuration of a remote printer"
msgstr "Konfiguration af en ekstern printer"

#: ../../printerdrake.pm_.c:1432
msgid "Starting network ..."
msgstr "Starter netv�rk ..."

#: ../../printerdrake.pm_.c:1454 ../../printerdrake.pm_.c:1462
#: ../../printerdrake.pm_.c:1464
msgid "Configure the network now"
msgstr "Konfigur�r netv�rket nu"

#: ../../printerdrake.pm_.c:1455
msgid "Network functionality not configured"
msgstr "Netv�rksfunktionalitet ikke konfigureret"

#: ../../printerdrake.pm_.c:1456
msgid ""
"You are going to configure a remote printer. This needs working\n"
"network access, but your network is not configured yet. If you\n"
"go on without network configuration, you will not be able to use\n"
"the printer which you are configuring now. How do you want \n"
"to proceed?"
msgstr ""
"Du er ved at konfigurere en ekstern printer. Dette kr�ver en\n"
"virkende netv�rksadgang, men dit netv�rk er endnu ikke\n"
"konfigureret. Hvis du vil forts�tte uden en netv�rkskonfiguration,\n"
"vil du ikke kunne bruge printeren som du konfigurerer nu.\n"
"Hvordan �nsker du at forts�tte?"

#: ../../printerdrake.pm_.c:1463
msgid "Go on without configuring the network"
msgstr "Forts�t med konfigurering af netv�rk"

#: ../../printerdrake.pm_.c:1496
msgid ""
"The network configuration done during the installation \n"
"cannot be started now. Please check whether the network\n"
"gets accessable after booting your system and correct the\n"
"configuration using the Mandrake Control Center, section\n"
"\"Network & Internet\"/\"Connection\", and afterwards set\n"
"up the printer, also using the Mandrake Control Center,\n"
"section \"Hardware\"/\"Printer\""
msgstr ""
"Netv�rksops�tningen lavet under installationen kan ikke\n"
"startes nu. Tjek venligst om netv�rket bliver tilg�ngeligt\n"
"efter opstart af dit system, og ret konfigurationen med\n"
"Mandrake Kontrolcenter, afsnittet 'Netv�rk og internet'/\n"
"'Forbindelse', og konfigur�r derefter printeren ogs� med\n"
"Mandrake Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"

#: ../../printerdrake.pm_.c:1503
msgid ""
"The network access was not running and could not be \n"
"started. Please check your configuration and your \n"
"hardware. Then try to configure your remote printer\n"
"again."
msgstr ""
"Netv�rksadgangen k�rte ikke og kunne ikke startes.\n"
"Tjek venligst din konfiguration og dit udstyr.\n"
"Pr�v derefter at konfigurere din eksterne printer igen."

#: ../../printerdrake.pm_.c:1516
msgid "Restarting printing system ..."
msgstr "Genstarter printsystemet ..."

#: ../../printerdrake.pm_.c:1548
msgid "high"
msgstr "h�j"

#: ../../printerdrake.pm_.c:1548
msgid "paranoid"
msgstr "paranoid"

#: ../../printerdrake.pm_.c:1549
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Installerer et printersystem p� sikkerhedsniveauet %s"

#: ../../printerdrake.pm_.c:1550
#, c-format
msgid ""
"You are about to install the printing system %s on\n"
"a system running in the %s security level.\n"
"\n"
"This printing system runs a daemon (background process)\n"
"which waits for print jobs and handles them. This daemon\n"
"is also accessable by remote machines through the network\n"
"and so it is a possible point for attacks. Therefore only\n"
"a few selected daemons are started by default in this\n"
"security level.\n"
"\n"
"Do you really want to configure printing on this\n"
"machine?"
msgstr ""
"Du er ved at installere et printsystem %s p�\n"
"et system k�rende p� sikkerhedsniveau %s.\n"
"\n"
"Dette printsystem k�rer som en d�mon (baggrundsproces)\n"
"som venter p� printeropgaver og behandler dem. Denne d�mon\n"
"er ogs� tilg�ngelig for eksterne makskiner via netv�rket,\n"
"og derfor er det et muligt angrebspunkt. Derfor bliver\n"
"kun nogle f� udvalgte d�moner startet op som standard i\n"
"dette sikkerhedsniveau.\n"
"\n"
"�nsker du virkelig at konfigurere udskrivning p� denne maskine?"

#: ../../printerdrake.pm_.c:1584
msgid "Starting the printing system at boot time"
msgstr "Starter printsystemet ved opstart"

#: ../../printerdrake.pm_.c:1585
#, c-format
msgid ""
"The printing system (%s) will not be started automatically\n"
"when the machine is booted.\n"
"\n"
"It is possible that the automatic starting was turned off \n"
"by changing to a higher security level, because the printing\n"
"system is a potential point for attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing\n"
"system turned on again?"
msgstr ""
"Printsystemet (%s) vil ikke blive startet automatisk, n�r\n"
"maskinen startes op.\n"
"Det er muligt at den automatiske opstart blev sl�et fra ved\n"
"�ndring til et h�jere sikkerhedsniveau, fordi printsystemet\n"
"er et muligt angrebspunkt.\n"
"\n"
"�nsker du at have den automatiske opstart af printsystemet\n"
"sl�et til igen?"

#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1644
#: ../../printerdrake.pm_.c:1671 ../../printerdrake.pm_.c:1701
#: ../../printerdrake.pm_.c:1778
msgid "Checking installed software..."
msgstr "Tjekker installeret programmel..."

#: ../../printerdrake.pm_.c:1648
msgid "Removing LPRng..."
msgstr "Fjerner LPRng..."

#: ../../printerdrake.pm_.c:1675
msgid "Removing LPD..."
msgstr "Fjerner LPD..."

#: ../../printerdrake.pm_.c:1727
msgid "Select Printer Spooler"
msgstr "V�lg skriverk�-behandler"

#: ../../printerdrake.pm_.c:1728
msgid "Which printing system (spooler) do you want to use?"
msgstr "Hvilket printersystem (spooler) �nsker du at bruge?"

#: ../../printerdrake.pm_.c:1759
#, c-format
msgid "Configuring printer \"%s\" ..."
msgstr "Konfigurerer printer '%s'..."

#: ../../printerdrake.pm_.c:1806 ../../printerdrake.pm_.c:1838
#: ../../printerdrake.pm_.c:2026 ../../printerdrake.pm_.c:2088
msgid "Printer options"
msgstr "Printer-muligheder"

#: ../../printerdrake.pm_.c:1815
msgid "Preparing PrinterDrake ..."
msgstr "Forbereder PrinterDrake ..."

#: ../../printerdrake.pm_.c:1845
msgid "Would you like to configure printing?"
msgstr "Vil du gerne konfigurere udskrivning?"

#: ../../printerdrake.pm_.c:1857
msgid "Printing system: "
msgstr "Printsystem: "

#: ../../printerdrake.pm_.c:1879
msgid ""
"The following printers are configured.\n"
"Click on one of them to modify it or\n"
"to get information about it or on \n"
"\"Add Printer\" to add a new printer."
msgstr ""
"De f�lgende printere er konfigureret.\n"
"Klik p� en af dem for at �ndre den, eller\n"
"for at f� information om den, eller klik\n"
"p� 'Tilf�j printer' for at tilf�je en\n"
"ny printer."

#: ../../printerdrake.pm_.c:1885 ../../standalone/draknet_.c:301
msgid "Normal Mode"
msgstr "Normal modus"

#: ../../printerdrake.pm_.c:1891 ../../printerdrake.pm_.c:2010
msgid " (Default)"
msgstr " (Forvalgt)"

#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1935
msgid "Printer(s) on remote CUPS server(s)"
msgstr "Printere p� eksterne CUPS tjenere"

#: ../../printerdrake.pm_.c:1896 ../../printerdrake.pm_.c:1936
msgid "Printer(s) on remote server(s)"
msgstr "Printere p� eksterne tjenere"

#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1919
#: ../../printerdrake.pm_.c:1922 ../../printerdrake.pm_.c:1971
msgid "Add printer"
msgstr "Tilf�j printer"

#: ../../printerdrake.pm_.c:1977 ../../printerdrake.pm_.c:1993
#: ../../printerdrake.pm_.c:2128
msgid "Do you want to configure another printer?"
msgstr "�nsker du at konfigurere en anden printer?"

#: ../../printerdrake.pm_.c:2003
msgid "Modify printer configuration"
msgstr "�ndr skriverkonfiguration"

#: ../../printerdrake.pm_.c:2004
#, c-format
msgid ""
"Printer %s: %s %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Skriver %s %s %s\n"
"Hvad �nsker du at forandre p�, p� denne printer?"

#: ../../printerdrake.pm_.c:2012
msgid "Do it!"
msgstr "G�r det!"

#: ../../printerdrake.pm_.c:2015 ../../printerdrake.pm_.c:2062
msgid "Printer connection type"
msgstr "Skriveropkoblingstype"

#: ../../printerdrake.pm_.c:2016 ../../printerdrake.pm_.c:2066
msgid "Printer name, description, location"
msgstr "Skrivernavn, beskrivelse, sted"

#: ../../printerdrake.pm_.c:2018 ../../printerdrake.pm_.c:2081
msgid "Printer manufacturer, model, driver"
msgstr "Skriverproducent, model, driver"

#: ../../printerdrake.pm_.c:2019 ../../printerdrake.pm_.c:2082
msgid "Printer manufacturer, model"
msgstr "Skriverproducent, model"

#: ../../printerdrake.pm_.c:2028 ../../printerdrake.pm_.c:2092
msgid "Set this printer as the default"
msgstr "S�t printeren som standard-printer"

#: ../../printerdrake.pm_.c:2029 ../../printerdrake.pm_.c:2097
msgid "Print test pages"
msgstr "Udskriver testsider"

#: ../../printerdrake.pm_.c:2030 ../../printerdrake.pm_.c:2099
msgid "Know how to print with this printer"
msgstr "V�d hvordan der skal udskrives med denne printer"

#: ../../printerdrake.pm_.c:2031 ../../printerdrake.pm_.c:2101
msgid "Remove printer"
msgstr "Fjern printer"

#: ../../printerdrake.pm_.c:2071
#, c-format
msgid "Removing old printer \"%s\" ..."
msgstr "Fjerner gammel printer \"%s\" ..."

#: ../../printerdrake.pm_.c:2096
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Printeren '%s' er nu sat som standard-printer."

#: ../../printerdrake.pm_.c:2103
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "�nsker du virkelig at fjerne skriveren \"%s\"?"

#: ../../printerdrake.pm_.c:2105
#, c-format
msgid "Removing printer \"%s\" ..."
msgstr "Fjerner printer \"%s\" ..."

#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
#: ../../proxy.pm_.c:78
msgid "Proxy configuration"
msgstr "Konfiguration af mellemv�rt (proxy)"

#: ../../proxy.pm_.c:30
msgid ""
"Welcome to the proxy configuration utility.\n"
"\n"
"Here, you'll be able to set up your http and ftp proxies\n"
"with or without login and password\n"
msgstr ""
"Velkommmen til programmet for proxy-konfigurering.\n"
"\n"
"Her vil du kunne ops�tte dine http- og ftp-proxyer\n"
"med eller uden logind og adgangskode\n"

#: ../../proxy.pm_.c:38
msgid ""
"Please fill in the http proxy informations\n"
"Leave it blank if you don't want an http proxy"
msgstr ""
"Udfyld venligst oplysningerne om http-proxy\n"
"Lad det v�re blankt hvis du ikke �nsker en http-proxy"

#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
msgid "URL"
msgstr "URL"

#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
msgid "port"
msgstr "port"

#: ../../proxy.pm_.c:44
msgid "Url should begin with 'http:'"
msgstr "Url burde begynde med 'http:'"

#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
msgid "The port part should be numeric"
msgstr "Port-delen b�r v�re numerisk"

#: ../../proxy.pm_.c:59
msgid ""
"Please fill in the ftp proxy informations\n"
"Leave it blank if you don't want an ftp proxy"
msgstr ""
"Udfyld venligst oplysningerne om ftp-proxy\n"
"Lad det v�re blankt hvis du ikke �nsker en ftp-proxy"

#: ../../proxy.pm_.c:65
msgid "Url should begin with 'ftp:'"
msgstr "Url burde begynde med 'ftp:'"

#: ../../proxy.pm_.c:79
msgid ""
"Please enter proxy login and password, if any.\n"
"Leave it blank if you don't want login/passwd"
msgstr ""
"Indtast venligst logind og adgangskode for proxy, hvis n�dvendigt.\n"
"Lad det v�re blankt hvis du ikke �nsker logind/adgangskode"

#: ../../proxy.pm_.c:80
msgid "login"
msgstr "login"

#: ../../proxy.pm_.c:82
msgid "password"
msgstr "adgangskode"

#: ../../proxy.pm_.c:84
msgid "re-type password"
msgstr "genindtast adgangskode"

#: ../../proxy.pm_.c:88
msgid "The passwords don't match. Try again!"
msgstr "Adgangskoderne stemmer ikke overens. Pr�v igen!"

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Kan ikke tilf�je en partition til _format�ret_ RAID md%d"

#: ../../raid.pm_.c:111
#, c-format
msgid "Can't write file %s"
msgstr "Kan ikke skrive filen %s"

#: ../../raid.pm_.c:136
msgid "mkraid failed"
msgstr "mkraid fejlede"

#: ../../raid.pm_.c:136
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid fejlede (m�ske mangler raidtools?)"

#: ../../raid.pm_.c:152
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Ikke nok partitioner til at benytte RAID level %d\n"

#: ../../services.pm_.c:15
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"

#: ../../services.pm_.c:16
msgid "Anacron a periodic command scheduler."
msgstr "Anacron en periodisk kommando planl�gger"

#: ../../services.pm_.c:17
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd bruges til at overv�ge batteristatus og skrive log til syslog.\n"
"Den kan ogs� bruges til at lukke maskinen n�r batteriet er p� lav."

#: ../../services.pm_.c:19
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"K�rer planlagte kommandoer med 'at' kommandoen p� tiden specificeret da\n"
"'at' blev k�rt, og k�rer batch kommandoer n�r den gennemsnitlige\n"
"systembelastning er lav nok"

#: ../../services.pm_.c:21
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron er et standard UNIX program der k�rer bruger-specifikke programmer\n"
"p� planlagte tidspunkter. Vixie cron tilf�jer en del forbedringer til\n"
"den basale UNIX cron, inklusive bedre sikkerhed og st�rkere "
"konfigurationsmuligheder."

#: ../../services.pm_.c:24
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM tilf�jer muse-support til tekst-baserede Linux applikationer\n"
"s�som Midnight Commander. Den tillader muse-baseret kopi�r-og-s�tind "
"operationer p� konsollen\n"
"og inkluderer support for pop-op-menuer i konsollen."

#: ../../services.pm_.c:27
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake k�rer en s�gning efter maskinel, og kan konfigurere nyt/�ndret\n"
"maskinel."

#: ../../services.pm_.c:29
msgid ""
"Apache is a World Wide Web server.  It is used to serve HTML files\n"
"and CGI."
msgstr ""
"Apache er en webserver.  Den bruges til at betjene HTML-filer\n"
"og CGI."

#: ../../services.pm_.c:31
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Internet superserver-d�monen (kaldet inetd) starter forskellige\n"
"internet-tjenester efter behov. Den er ansvarlig for at starte tjenester "
"som\n"
"telnet, ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de "
"tjenester,\n"
"den er ansvarlig for."

#: ../../services.pm_.c:35
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Start pakkefiltrering for Linux kerne 2.2 serien for at ops�tte\n"
"en brandmur til at beskytte din maskine mod netv�rksangreb."

#: ../../services.pm_.c:37
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Denne pakke indl�ser den valgte tastatur-tabel,\n"
"som valgt i /etc/sysconfig/keyboard. Dette kan v�lges i kbdconfig "
"programmet.\n"
"Dette b�r v�re sl�et til p� de fleste maskiner."

#: ../../services.pm_.c:40
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Automatisk regenerering af kernehoved i /boot for\n"
"/usr/include/linux/{autoconf,version}.h"

#: ../../services.pm_.c:42
msgid "Automatic detection and configuration of hardware at boot."
msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."

#: ../../services.pm_.c:43
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf vil nogen gange arrangere udf�relse af forskellige\n"
"opgaver ved opstart for at vedligeholde systemkonfigurationen."

#: ../../services.pm_.c:45
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd er printer-d�monen som er n�dvendig for at lpr virker�.\n"
"Den er basalt en server der h�ndterer udskrifts-opgaver."

#: ../../services.pm_.c:47
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Linux Virtuel Server, brugt til at bygge en tjener med h�j ydelse og\n"
"tilg�ngelighed."

#: ../../services.pm_.c:49
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
"host names to IP addresses."
msgstr ""
"named (BIND) er en dom�ne-navneserver (DNS) der bruges til\n"
"opslag af navne til IP-adresser."

#: ../../services.pm_.c:51
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Monterer og afmonterer alle netv�rks filsystemer (NFS),\n"
"SMB (LanManager/Windows) og NCP (NetWare) monterings-stier"

#: ../../services.pm_.c:53
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiverer/deaktiverer alle netv�rks-kort som er konfigureret\n"
"til at starte ved opstart"

#: ../../services.pm_.c:55
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS er en popul�r protokol til fildeling over TCP/IP netv�rk.\n"
"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem\n"
"/etc/exports filen"

#: ../../services.pm_.c:58
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS er en popul�r protokol til fildeling over TCP/IP\n"
"netv�rk. Denne service giver NFS fill�snings funktionalitet"

#: ../../services.pm_.c:60
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""
"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
"opstart."

#: ../../services.pm_.c:62
msgid "Support the OKI 4w and compatible winprinters."
msgstr "St�tter OKI 4w og kompatible winskrivere."

#: ../../services.pm_.c:63
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA underst�ttelse er normalt til at underst�tte ting som\n"
"ethernet og modemer p� b�rbare.  Den vil ikke blive startet medmindre den "
"er\n"
"konfigureret, s� det er sikkert at have den installeret p� maskiner der "
"ikke\n"
"har behov for den."

#: ../../services.pm_.c:66
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper h�ndterer RPC tilslutninger, som bliver brugt af\n"
"protokoller som NFS og NIS. Portmap serveren skal k�re p� maskiner som\n"
"bruger protokoller der udnytter RPC mekanismen"

#: ../../services.pm_.c:69
msgid ""
"Postfix is a Mail Transport Agent, which is the program that\n"
"moves mail from one machine to another."
msgstr ""
"Postfix er en transport-agent for post, som bruges af programmer der\n"
"flytter post fra en maskine til en anden."

#: ../../services.pm_.c:71
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Gemmer og henter system entropi p�l for en h�jre kvalitet\n"
"p� generering af tilf�ldige tal."

#: ../../services.pm_.c:73
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""
"Tilordn r� enheder til blokenheder (som harddisk-\n"
"partitioner) til brug af applikationer som Oracle"

#: ../../services.pm_.c:75
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed d�monen giver mulighed for automatisk IP rutetabel opdatering\n"
"via RIP protokollen. RIP kan bruges til sm� netv�rk, men n�r det kommer til\n"
"mere komplekse netv�rk er der behov for en mere kompleks protokol."

#: ../../services.pm_.c:78
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat protokollen tillader brugere p� et netv�rk at\n"
"hente systeminformation fra enhver maskine p� dette netv�rk."

#: ../../services.pm_.c:80
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers protokollen tillader brugere p� et netv�rk at identificere\n"
"hvem der er logget p� andre maskiner"

#: ../../services.pm_.c:82
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"rwho protokollen tillader eksterne brugere at hente en liste over alle\n"
"brugere der er logget ind p� en maskine, der k�rer rwho d�monen (minder om "
"finger)."

#: ../../services.pm_.c:84
msgid "Launch the sound system on your machine"
msgstr "Start lydsystemet p� din maskine"

#: ../../services.pm_.c:85
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog er en facilitet som mange d�moner bruger til log beskeder\n"
"Det er en god id� altid at k�re syslog"

#: ../../services.pm_.c:87
msgid "Load the drivers for your usb devices."
msgstr "Indl�s driverne for dine usb-enheder."

#: ../../services.pm_.c:88
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""
"Starter X-font tjeneren (dette er obligatorisk for at XFree skal k�re)."

#: ../../services.pm_.c:114 ../../services.pm_.c:156
msgid "Choose which services should be automatically started at boot time"
msgstr "V�lg hvilke tjenester der skal startes automatisk ved opstart"

#: ../../services.pm_.c:126
msgid "Printing"
msgstr "Udskriver"

#: ../../services.pm_.c:127
msgid "Internet"
msgstr "Internet"

#: ../../services.pm_.c:130
msgid "File sharing"
msgstr "Fildeling"

#: ../../services.pm_.c:132
msgid "System"
msgstr "System"

#: ../../services.pm_.c:137
msgid "Remote Administration"
msgstr "Ekstern administration"

#: ../../services.pm_.c:145
msgid "Database Server"
msgstr "Databaseserver"

#: ../../services.pm_.c:174
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Tjenester: %d aktiverede for %d registrerede"

#: ../../services.pm_.c:186
msgid "Services"
msgstr "Tjenester"

#: ../../services.pm_.c:198
msgid "running"
msgstr "k�rer"

#: ../../services.pm_.c:198
msgid "stopped"
msgstr "stoppet"

#: ../../services.pm_.c:212
msgid "Services and deamons"
msgstr "Tjenester og d�moner"

#: ../../services.pm_.c:217
msgid ""
"No additionnal information\n"
"about this service, sorry."
msgstr ""
"Beklager, der er ingen ekstra\n"
"information om denne tjeneste."

#: ../../services.pm_.c:224
msgid "On boot"
msgstr "Ved opstart"

#: ../../standalone.pm_.c:25
msgid "Installing packages..."
msgstr "Installerer pakker..."

#: ../../standalone/diskdrake_.c:63
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""
"Jeg kan ikke l�se din partitionstabel, den er for �delagt :(\n"
"Jeg vil fors�ge mig med at slette de beskadigede partitioner"

#: ../../standalone/drakautoinst_.c:44
msgid "Error!"
msgstr "Fejl!"

#: ../../standalone/drakautoinst_.c:45
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Jeg kan ikke finde filen '%s' som jeg beh�ver."

#: ../../standalone/drakautoinst_.c:47
msgid "Auto Install Configurator"
msgstr "Autoinstallationskonfigurering"

#: ../../standalone/drakautoinst_.c:48
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
"er lidt farlig, og m� bruges med forsigtighed.\n"
"\n"
"Med denne mulighed vil du igen kunne k�re installationen du gennemf�rte p� "
"denne maskine, med muligheden for at selv kunne �ndre p� nogen af "
"indstillingerne.\n"
"\n"
"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
"gennemf�rt automatisk, uanset hvad du valgte under installationen.\n"
"\n"
"�nsker du at forts�tte?"

#: ../../standalone/drakautoinst_.c:70
msgid "Automatic Steps Configuration"
msgstr "Konfiguration af automatiske skridt"

#: ../../standalone/drakautoinst_.c:71
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Venligst v�lg for hvert skridt om det skal v�re som under installationen, "
"eller manuelt"

#: ../../standalone/drakautoinst_.c:112 ../../standalone/drakgw_.c:599
msgid "Congratulations!"
msgstr "Tillykke!"

#: ../../standalone/drakautoinst_.c:113
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Disketten er blevet genereret.\n"
"Du kan nu gennemf�re installationen igen."

#: ../../standalone/drakgw_.c:36 ../../standalone/drakgw_.c:181
msgid "Internet Connection Sharing"
msgstr "Deling af internetforbindelse"

#: ../../standalone/drakgw_.c:119
msgid "Internet Connection Sharing currently enabled"
msgstr "Deling af internetforbindelse er sl�et til"

#: ../../standalone/drakgw_.c:120
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Indstilling af deling af internetforbindelse er allerede gjort.\n"
"Deling er aktiveret.\n"
"\n"
"Hvad �nsker du at g�re?"

#: ../../standalone/drakgw_.c:124
msgid "disable"
msgstr "de-aktiv�r"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "dismiss"
msgstr "tr�d af"

#: ../../standalone/drakgw_.c:124 ../../standalone/drakgw_.c:149
msgid "reconfigure"
msgstr "genkonfigur�r"

#: ../../standalone/drakgw_.c:127
msgid "Disabling servers..."
msgstr "Sl�r servere fra..."

#: ../../standalone/drakgw_.c:135
msgid "Internet connection sharing is now disabled."
msgstr "Deling af internetforbindelse er nu sl�et fra"

#: ../../standalone/drakgw_.c:144
msgid "Internet Connection Sharing currently disabled"
msgstr "Deling af internetforbindelse er sl�et fra"

#: ../../standalone/drakgw_.c:145
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Indstilling af deling af internetforbindelse er allerede gjort.\n"
"Den er de-aktiveret for n�rv�rende\n"
"Hvad �nsker du at g�re?"

#: ../../standalone/drakgw_.c:149
msgid "enable"
msgstr "aktiv�r"

#: ../../standalone/drakgw_.c:156
msgid "Enabling servers..."
msgstr "Aktiverer servere..."

#: ../../standalone/drakgw_.c:161
msgid "Internet connection sharing is now enabled."
msgstr "Deling af internetforbindelse er nu sl�et til"

#: ../../standalone/drakgw_.c:182
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
"Med denne mulighed vil andre maskiner p� dit lokale netv�rk kunne bruge "
"internetforbindelsen p� denne maskine.\n"
"\n"
"Bem�rk: du skal bruge en dediceret netv�rksadapter, for at lave et lokalt "
"netv�rk (LAN)."

#: ../../standalone/drakgw_.c:208
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Gr�nseflade %s (benytter modul %s)"

#: ../../standalone/drakgw_.c:209
#, c-format
msgid "Interface %s"
msgstr "Gr�nseflade %s"

#: ../../standalone/drakgw_.c:217
msgid "No network adapter on your system!"
msgstr "Ikke nogen netv�rksadapter i dit system!"

#: ../../standalone/drakgw_.c:218
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Ingen ethernet netv�rksadapter er blevet fundet p� dit system. K�r venligst "
"v�rkt�jet til maskinel konfiguration."

#: ../../standalone/drakgw_.c:224
msgid "Network interface"
msgstr "Netv�rksgr�nsesnit"

#: ../../standalone/drakgw_.c:225
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Der er kun �n konfigureret netv�rksadapter i dit system:\n"
"\n"
"%s\n"
"\n"
"Jeg skal til at s�tte dit lokalnet p� med den adapter."

#: ../../standalone/drakgw_.c:234
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"V�lg venligst hvilken netv�rksadapter som skal forbindestil dit lokalnet."

#: ../../standalone/drakgw_.c:243
msgid ""
"Warning, the network adapter is already configured. I will reconfigure it."
msgstr ""
"Advarsel, netv�rksadapteren er allerede konfigureret. Jeg vil omkonfigurere "
"den."

#: ../../standalone/drakgw_.c:254
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"

#: ../../standalone/drakgw_.c:262 ../../standalone/drakgw_.c:268
msgid "Firewalling configuration detected!"
msgstr "Brandmurkonfiguration genkendt!"

#: ../../standalone/drakgw_.c:263 ../../standalone/drakgw_.c:269
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
"muligvis lave manuelle rettelser efter installationen."

#: ../../standalone/drakgw_.c:277
msgid "Configuring..."
msgstr "Konfigurerer..."

#: ../../standalone/drakgw_.c:278
msgid "Configuring scripts, installing software, starting servers..."
msgstr "Konfigurerer skript, installerer programmel, starter servere..."

#: ../../standalone/drakgw_.c:311
#, c-format
msgid "Problems installing package %s"
msgstr "Problemer med installation af %s"

#: ../../standalone/drakgw_.c:600
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""
"Alt er blevet konfigureret.\n"
"Du kan nu dele din internetforbindelse med andre maskiner p� dit lokale "
"netv�rk, ved at bruge DHCP."

#: ../../standalone/drakgw_.c:617
msgid "The setup has already been done, but it's currently disabled."
msgstr "Indstilling er allerede gjort. men er de-aktiveret for n�rv�rende."

#: ../../standalone/drakgw_.c:618
msgid "The setup has already been done, and it's currently enabled."
msgstr "Indstilling er allerede gjort. og er for n�rv�rende aktiv."

#: ../../standalone/drakgw_.c:619
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Deling af Internetforbindelse har aldrig v�ret konfigureret."

#: ../../standalone/drakgw_.c:624
msgid "Internet connection sharing configuration"
msgstr "Konfiguration af deling af internetforbindelse"

#: ../../standalone/drakgw_.c:631
#, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"Velkommen til v�rkt�jet til deling af internetforbindelse!\n"
"%s\n"
"\n"
"Klik p� Konfigur�r for at starte programmet til at dele din "
"internetforbindelse!"

#: ../../standalone/draknet_.c:79
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Netv�rkskonfiguration (%d adaptorer)"

#: ../../standalone/draknet_.c:86 ../../standalone/draknet_.c:573
msgid "Profile: "
msgstr "Profil: "

#: ../../standalone/draknet_.c:94
msgid "Del profile..."
msgstr "Slet profil..."

#: ../../standalone/draknet_.c:100
msgid "Profile to delete:"
msgstr "Profil der skal slettes:"

#: ../../standalone/draknet_.c:128
msgid "New profile..."
msgstr "Ny profil..."

#: ../../standalone/draknet_.c:134
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""
"Navnet p� profilen der skal oprettes (den nye profil oprettes som en \n"
"kopi af den nuv�rende) :"

#: ../../standalone/draknet_.c:160
msgid "Hostname: "
msgstr "V�rtsnavn: "

#: ../../standalone/draknet_.c:167
msgid "Internet access"
msgstr "Internetadgang"

#: ../../standalone/draknet_.c:180
msgid "Type:"
msgstr "Type:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Gateway:"
msgstr "Gateway:"

#: ../../standalone/draknet_.c:183 ../../standalone/draknet_.c:397
msgid "Interface:"
msgstr "Gr�nseflade:"

#: ../../standalone/draknet_.c:192
msgid "Status:"
msgstr "Status:"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Connected"
msgstr "Tilsluttet"

#: ../../standalone/draknet_.c:194 ../../standalone/draknet_.c:410
msgid "Not connected"
msgstr "Ikke tilsluttet"

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Connect..."
msgstr "Tilslut..."

#: ../../standalone/draknet_.c:197 ../../standalone/draknet_.c:411
msgid "Disconnect..."
msgstr "Afbrud..."

#: ../../standalone/draknet_.c:215
msgid "Starting your connection..."
msgstr "Starter din forbindelse..."

#: ../../standalone/draknet_.c:223
msgid "Closing your connection..."
msgstr "Lukker din forbindelse..."

#: ../../standalone/draknet_.c:228
msgid ""
"The connection is not closed.\n"
"Try to do it manually by running\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"in root."
msgstr ""
"Forbindelsen er ikke lukket.\n"
"Pr�v at g�re det manuelt ved at k�re\n"
"/etc/sysconfig/network-scripts/net_cnx_down\n"
"i roden (som root)"

#: ../../standalone/draknet_.c:231
msgid "The system is now disconnected."
msgstr "Systemet er nu afbrudt."

#: ../../standalone/draknet_.c:243
msgid "Configure Internet Access..."
msgstr "Konfigur�r Internetadgang..."

#: ../../standalone/draknet_.c:250 ../../standalone/draknet_.c:446
msgid "LAN configuration"
msgstr "LAN konfiguration"

#: ../../standalone/draknet_.c:255
msgid "Driver"
msgstr "Drivprogram"

#: ../../standalone/draknet_.c:255
msgid "Interface"
msgstr "Gr�nseflade"

#: ../../standalone/draknet_.c:255
msgid "Protocol"
msgstr "Protokol"

#: ../../standalone/draknet_.c:255
msgid "State"
msgstr "Status"

#: ../../standalone/draknet_.c:267
msgid "Configure Local Area Network..."
msgstr "Konfigur�r lokalnetv�rk..."

#: ../../standalone/draknet_.c:279
msgid "Click here to launch the wizard ->"
msgstr "Klik her for at starte vejlederen ->"

#: ../../standalone/draknet_.c:306
msgid "Apply"
msgstr "Anvend"

#: ../../standalone/draknet_.c:325
msgid "Please Wait... Applying the configuration"
msgstr "Vent venligst... S�tter konfigurationen i anvendelse"

#: ../../standalone/draknet_.c:428
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"Du har ingen konfigurerede gr�nsesnit.\n"
"Konfigurer disse f�rst ved at klikke p� 'Konfigur�r'"

#: ../../standalone/draknet_.c:450
msgid "LAN Configuration"
msgstr "LAN konfiguration"

#: ../../standalone/draknet_.c:457
#, c-format
msgid "Adapter %s: %s"
msgstr "Adapter %s: %s"

#: ../../standalone/draknet_.c:463
msgid "Boot Protocol"
msgstr "Opstartsprotokol"

#: ../../standalone/draknet_.c:464
msgid "Started on boot"
msgstr "Startede med opstart"

#: ../../standalone/draknet_.c:465
msgid "DHCP client"
msgstr "DHCP-klient"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
msgid "activate now"
msgstr "aktiv�r nu"

#: ../../standalone/draknet_.c:489 ../../standalone/draknet_.c:491
msgid "desactivate now"
msgstr "deaktiv�r nu"

#: ../../standalone/draknet_.c:538
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""
"Du har ingen internet-opkobling.\n"
"Opret �n f�rst ved at klikke p� 'Konfigur�r'"

#: ../../standalone/draknet_.c:562
msgid "Internet connection configuration"
msgstr "Konfiguration af Internetforbindelse"

#: ../../standalone/draknet_.c:566
msgid "Internet Connection Configuration"
msgstr "Konfiguration af Internetforbindelse"

#: ../../standalone/draknet_.c:575
msgid "Connection type: "
msgstr "Type af forbindelse"

#: ../../standalone/draknet_.c:581
msgid "Parameters"
msgstr "Parametre"

#: ../../standalone/draknet_.c:608
msgid "Ethernet Card"
msgstr "Ethernet-kort"

#: ../../standalone/draknet_.c:609
msgid "DHCP Client"
msgstr "DHCP-Klient"

#: ../../standalone/draksec_.c:21
msgid "Welcome To Crackers"
msgstr "Velkommen til Crackere"

#: ../../standalone/draksec_.c:22
msgid "Poor"
msgstr "Ringe"

#: ../../standalone/draksec_.c:26
msgid "Paranoid"
msgstr "Paranoid"

#: ../../standalone/draksec_.c:29
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Dette niveau skal bruges med omtanke. Det g�r dit system nemmere at bruge,\n"
"men er meget s�rbart: det m� ikke bruges til en maskine der er i et netv�rk\n"
"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
"adgangskoder."

#: ../../standalone/draksec_.c:32
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Kontrol af adgangskode er nu aktiveret, men brug som netv�rksmaskine er\n"
"stadig ikke anbefalet."

#: ../../standalone/draksec_.c:33
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""
"Ikke mange forbedringer af sikkerheds-niveauet, den vigtigste er at der er\n"
"flere sikkerheds-advarsler og eftersyn."

#: ../../standalone/draksec_.c:35
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""
"Dette er standard sikkerheds-anbefalingen for en maskine med\n"
"forbindelse til Internettet. Der er nu sikkerheds-eftersyn."

#: ../../standalone/draksec_.c:37
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""
"Med dette sikkerhedsniveau, kan brug som server blive muligt\n"
"Sikkerheden er nu h�j nok til at systemet kan bruges som server\n"
"som tillader forbindelser fra mange klienter."

#: ../../standalone/draksec_.c:40
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""
"Dette svarer til niveau 4 med ekstra sikkerhed, systemet er nu helt lukket.\n"
"Sikkerheden er nu p� h�jeste niveau."

#: ../../standalone/draksec_.c:65
msgid "Security level"
msgstr "Sikkerhedsniveau"

#: ../../standalone/draksec_.c:67
msgid "Use libsafe for servers"
msgstr "Brug libsafe for servere"

#: ../../standalone/draksec_.c:68
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""
"Et bibliotek som beskytter mod angreb via bufferoverl�b og formatstrenge."

#: ../../standalone/draksec_.c:72
msgid "Setting security level"
msgstr "Indstiller sikkerhedsniveau"

#: ../../standalone/drakxconf_.c:47
msgid "Control Center"
msgstr "Kontrolcenter"

#: ../../standalone/drakxconf_.c:48
msgid "Choose the tool you want to use"
msgstr "V�lg det v�rkt�j du �nsker at benytte"

#: ../../standalone/keyboarddrake_.c:16
msgid "usage: keyboarddrake [--expert] [keyboard]\n"
msgstr "brug: keyboarddrake [--expert] [tastatur]\n"

#: ../../standalone/keyboarddrake_.c:36
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"

#: ../../standalone/livedrake_.c:23
msgid "Change Cd-Rom"
msgstr "Skift cdrom"

#: ../../standalone/livedrake_.c:24
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Inds�t venligst installations-cdrom'en i dit cdrom-drev og tryk p� Ok, n�r "
"det gjort\n"
"Hvis du ikke har den - tryk p� Annull�r, s� undg�s levende opgradering"

#: ../../standalone/livedrake_.c:34
msgid "Unable to start live upgrade !!!\n"
msgstr "Kan ikke starte levende opgradering !!!\n"

#: ../../standalone/mousedrake_.c:58
msgid "no serial_usb found\n"
msgstr "ingen seriel_usb fundet\n"

#: ../../standalone/mousedrake_.c:62
msgid "Emulate third button?"
msgstr "Emulering af tredje knap?"

#: ../../standalone/tinyfirewall_.c:29
msgid "Firewalling Configuration"
msgstr "Brandmurkonfiguration"

#: ../../standalone/tinyfirewall_.c:42
msgid "Firewalling configuration"
msgstr "Brandmurkonfiguration"

#: ../../standalone/tinyfirewall_.c:77
msgid ""
"Firewalling\n"
"\n"
"You already have set up a firewall.\n"
"Click on Configure to change or remove the firewall"
msgstr ""
"Brandmure\n"
"\n"
"Du har allerede indstillet en brandmur.\n"
"Klik p� Konfigur�r for at �ndre eller fjerne brandmuren"

#: ../../standalone/tinyfirewall_.c:81
msgid ""
"Firewalling\n"
"\n"
"Click on Configure to set up a standard firewall"
msgstr ""
"Brandmure\n"
"\n"
"Klik p� Konfigur�r for at s�tte en standard-brandmur op"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "V�lg sprog"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "V�lg installations-metode"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "Harddisk bestemmelse"

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Konfigur�r mus"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "V�lg tastatur"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "Sikkerhed"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "V�lg filsystemer"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Format�r partitioner"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "V�lg pakker til installation"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "Install�r system"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Tilf�j bruger"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "Konfigur�r netv�rk"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Konfigur�r tjenester"

#: ../../steps.pm_.c:30
msgid "Create a bootdisk"
msgstr "Opret opstartsdiskette"

#: ../../steps.pm_.c:32
msgid "Install bootloader"
msgstr "Install�r systemopstarter"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Konfigur�r X"

#: ../../steps.pm_.c:34
msgid "Exit install"
msgstr "Afslut installation"

#: ../../tinyfirewall.pm_.c:9
msgid ""
"tinyfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"tinyfirewall-konfigurator\n"
"\n"
"Dette konfigurerer en personlig brandmur for denne Mandrake Linux maskine.\n"
"For en kraftfuld dedikeret brandmurs-l�sning se venligst denspecialiserede "
"MandrakeSecurity Firewall-distribution."

#: ../../tinyfirewall.pm_.c:14
msgid ""
"We'll now ask you questions about which services you'd like to allow\n"
"the Internet to connect to.  Please think carefully about these\n"
"questions, as your computer's security is important.\n"
"\n"
"Please, if you're not currently using one of these services, firewall\n"
"it off.  You can change this configuration anytime you like by\n"
"re-running this application!"
msgstr ""
"Vi vil nu sp�rge dig om hvilke tjenester du gerne vil tillade\n"
"internettet at forbinde til.  T�nk grundigt over disse\n"
"sp�rgsm�l, da din maskines sikkerhed er vigtig.\n"
"\n"
"Hvis du ikke bruger nogle af disse tjenester s� sk�rm dem af\n"
"med brandmuren.  Du kan altid �ndre indstillingerne n�r du vil\n"
"ved at k�re dette program igen!"

#: ../../tinyfirewall.pm_.c:21
msgid ""
"Are you running a web server on this machine that you need the whole\n"
"Internet to see? If you are running a webserver that only needs to be\n"
"accessed by this machine, you can safely answer NO here.\n"
"\n"
msgstr ""
"K�rer du en webserver p� denne maskine som du har brug for at hele\n"
"internettet kan se? Hvis du k�rer en webserver som kun beh�ver at blive\n"
"tilg�et af denne maskine kan du roligt svare NEJ her.\n"
"\n"

#: ../../tinyfirewall.pm_.c:26
msgid ""
"Are you running a name server on this machine? If you didn't set one\n"
"up to give away IP and zone information to the whole Internet, please\n"
"answer no.\n"
"\n"
msgstr ""
"K�rer du en DNS-navneserver p� denne maskine? Hvis du ikke har sat\n"
"en op til at give IP- og zone-information til hele internettet kan du svare\n"
"nej her.\n"
"\n"

#: ../../tinyfirewall.pm_.c:31
msgid ""
"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
"is a telnet-replacement that you might use to login. If you're using\n"
"telnet now, you should definitely switch to ssh. telnet is not\n"
"encrypted -- so some attackers can steal your password if you use\n"
"it. ssh is encrypted and doesn't allow for this eavesdropping."
msgstr ""
"�nsker du at tillade indg�ende Secure Shell ssh-forbindelser?\n"
"Det er en erstatning for telnet som du m�ske vil bruge til at logge ind.\n"
"Hvis du bruger telnet nu b�r du afgjort skifte til ssh. telnet er ikke\n"
"krypteret - s� nogle angribere kan stj�le din adgangskode hvis du bruger\n"
"den. ssh er krypteret og tillader ikke den slags aflytning."

#: ../../tinyfirewall.pm_.c:36
msgid ""
"Do you want to allow incoming telnet connections?\n"
"This is horribly unsafe, as we explained in the previous screen. We\n"
"strongly recommend answering No here and using ssh in place of\n"
"telnet.\n"
msgstr ""
"Vil du tillade indg�ende telnet-forbindelser?\n"
"Dette er virkeligt usikkert som vi har forklaret i det foreg�ende billede. "
"Vi\n"
"anbefaler st�rkt at du svarer NEJ her og bruger ssh i stedet for telnet.\n"

#: ../../tinyfirewall.pm_.c:41
msgid ""
"Are you running an FTP server here that you need accessible to the\n"
"Internet? If you are, we strongly recommend that you only use it for\n"
"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
"attackers, since FTP also uses no encryption for transferring passwords.\n"
msgstr ""
"K�rer du en FTP-tjeneste p� denne maskine som du har brug for at hele\n"
"internettet har adgang til? Hvis du har s� anbefaler vi st�rkt at du kun\n"
"bruger den til anonyme overf�rsler. En hvilkensomhelst adgangskode sendt\n"
"over FTP kan stj�les af visse angribere, siden FTP heller ikke bruger\n"
"kryptering til at overf�re adgangskoder.\n"

#: ../../tinyfirewall.pm_.c:46
msgid ""
"Are you running a mail server here? If you're sending you \n"
"messages through pine, mutt or any other text-based mail client,\n"
"you probably are.  Otherwise, you should firewall this off.\n"
"\n"
msgstr ""
"K�rer du en post-server her? Hvis du sender beskeder med\n"
"pine, mutt eller en anden tekstbaseret post-klient er det sandsynligt.\n"
"Ellers b�r du sk�rme den v�k.\n"
"\n"

#: ../../tinyfirewall.pm_.c:51
msgid ""
"Are you running a POP or IMAP server here? This would\n"
"be used to host non-web-based mail accounts for people via \n"
"this machine.\n"
"\n"
msgstr ""
"K�rer du en POP- eller IMAP-tjeneste her? Dette kan bruges til at betjene "
"ikke-webbaserede postkonti for folk via denne maskine.\n"
"\n"

#: ../../tinyfirewall.pm_.c:56
msgid ""
"You appear to be running a 2.2 kernel.  If your network IP\n"
"is automatically set by a computer in your home or office \n"
"(dynamically assigned), we need to allow for this.  Is\n"
"this the case?\n"
msgstr ""
"Du ser ud til at k�re en 2.2-kerne. Hvis din IP-netv�rksadresse\n"
"bliver sat automatisk af en maskine i dit hjem eller kontor\n"
"(dynamisk tildelt) b�r vi tillade dette. Er dette tilf�ldet?\n"

#: ../../tinyfirewall.pm_.c:61
msgid ""
"Is your computer getting time syncronized to another computer?\n"
"Mostly, this is used by medium-large Unix/Linux organizations\n"
"to synchronize time for logging and such.  If you're not part\n"
"of a larger office and haven't heard of this, you probably \n"
"aren't."
msgstr ""
"F�r din maskine tiden synkroniseret efter en anden maskine?\n"
"Oftest er dette brugt af st�rre Unix/Linux-organisationer for at\n"
"synkronisere tiden for logning og lignende. Hvis du ikke er en del\n"
"af et st�rre kontor og ikke har h�rt om dette er det sandsynligvis\n"
"ikke tilf�ldet."

#: ../../tinyfirewall.pm_.c:66
msgid ""
"Configuration complete.  May we write these changes to disk?\n"
"\n"
"\n"
"\n"
msgstr ""
"Konfigurationen er f�rdig. Skal vi skrive disse �ndringer til disken?\n"
"\n"
"\n"
"\n"

#: ../../tinyfirewall.pm_.c:82
#, c-format
msgid "Can't open %s: %s\n"
msgstr "Kan ikke �bne %s: %s\n"

#: ../../tinyfirewall.pm_.c:84
#, c-format
msgid "Can't open %s for writing: %s\n"
msgstr "Kan ikke �bne %s for skrivning: %s\n"

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Web/FTP"

#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Netv�rksmaskine (klient)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-v�rt, SMB-v�rt, mellemv�rt (proxy), SSH-v�rt"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Kontor"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome-arbejdsstation"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "V�rkt�jer til Palm Pilot og Visor"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Arbejdsstation"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Brandmur/router"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Tjener for dom�nenavn og netv�rksinformation"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
"gnumeric), pdf-visere, o.lign."

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Lyd-relaterede v�rkt�jer: mp3 eller midi-afspillere, mixere o.lign."

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "B�ger og vejledninger om Linux og Frit Programmel"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE-arbejdsstation"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimedie - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Samling af v�rkt�jer til post, nyheder, filoverf�rsel og chat"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Database"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL eller MySQL database-tjener"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "V�rkt�jer til at lette indstillingen af din maskine"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimedie - Lyd"

#: ../../share/compssUsers:999
msgid "Utilities"
msgstr "V�rkt�jer"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "Dokumentation"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konsolv�rkt�jer"

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr "Postfix posttjener, Inn nyhedstjener"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internet-station"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimedie-station"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfiguration"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Flere grafiske milj�er (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop -milj�et, det grundl�ggende grafiske milj�, med en vifte af "
"supplerende v�rkt�jer."

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Grafisk milj�"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Udvikling"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache og Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "V�rkt�jer til at skabe og br�nde CD�er"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Kontor-arbejdsstation"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, o.lign."

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Grafiske programmer som fx The Gimp"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS "

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."

#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Netv�rksmaskine server"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr "Post/diskussionsgrupper"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Spillemaskine"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Videoafspillere og redigeringsv�rkt�jer"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimedie - Grafik"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Underholdnings-programmer: arkade, br�t, strategi, osv."

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"V�rkt�jss�t til at l�se samt sende post og nyheder (pine, mutt, tin..) , og "
"til at browse p� nettet"

#: ../../share/compssUsers:999
msgid "Archiving, emulators, monitoring"
msgstr "Arkivering, emulering, overv�gning"

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Personlig �konomi"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr "Et grafisk milj� med brugervenlig samling af programmer og v�rkt�jer"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Klienter for forskellige protokoller inklusiv ssh"

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internetadgang"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Lyd- og video-afspillere og redigeringsv�rkt�jer"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Andre grafiske milj�er"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr "Redigeringsv�rkt�jer, skaller, filv�rkt�jer, terminaler"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "Programmer til at h�ndtere din �konomi, som fx gnucash"

#: ../../share/compssUsers:999
msgid "Games"
msgstr "Spil"

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Personlig informationsh�ndtering"

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedie - CD-br�nding"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Videnskabelig arbejdsstation"

#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
#~ msgstr "kan ikke l�se /etc/sysconfig/autologin: %s"

#~ msgid "Do you want to restart the network"
#~ msgstr "�nsker du at genstarte netv�rket"

#~ msgid ""
#~ "\n"
#~ "Do you agree?"
#~ msgstr ""
#~ "\n"
#~ "Er du enig?"

#~ msgid "I'm about to restart the network device:\n"
#~ msgstr "Jeg er ved at genstarte netv�rksenheden:\n"

#~ msgid "I'm about to restart the network device %s. Do you agree?"
#~ msgstr "Jeg er ved at genstarte netv�rksenheden %s. Er du enig?"

#~ msgid ""
#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
#~ msgstr ""
#~ "Med mindre du bestemt v�d noget andet, er det normale valg /dev/hda\n"
#~ "(f�rste master IDE disk) eller /dev/sda (f�rste SCSI disk)."

#~ msgid ""
#~ "The printing system which you are going to use (%s) needs basic \n"
#~ "network functionality, but your network functionality is not\n"
#~ "configured yet. If you go on without network configuration, your\n"
#~ "printing system will set up a network only consisting of the \n"
#~ "local machine which does not allow the usage of remote printers\n"
#~ "or the sharing of a local printer with remote clients, but you\n"
#~ "can set up local printers usable from your local machine. How do\n"
#~ " you want to proceed?"
#~ msgstr ""
#~ "Printersystemet som du skal bruge (%s) beh�ver basal\n"
#~ "netv�rksfunktionalitet, men din netv�rksfunktionalitet er ikke\n"
#~ "konfigureret endnu. Hvis du vil forts�tte uden en netv�rkskonfiguration,\n"
#~ "vil dit printsystem ops�tte et netv�rk der kun best�r af den\n"
#~ "lokale maskine; hvilket ikke tillader brug af eksterne printere, eller\n"
#~ "deling af en lokal printer med eksterne klienter, men du kan\n"
#~ "ops�tte lokale printere der kan bruges fra din lokale maskine.\n"
#~ "Hvordan �nsker du at forts�tte?"

#~ msgid ""
#~ "The following printers are configured.\n"
#~ "You can add some more or modify the existing ones."
#~ msgstr ""
#~ "De f�lgende printk�er er konfigurerede.\n"
#~ "Du kan tilf�je flere eller �ndre de eksisterende."

#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
#~ msgstr "Opkoblingstidsudl�b (i sekunder) [beta, endnu ikke implementeret ]"

#~ msgid ""
#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
#~ "has\n"
#~ "selected packages on another CDROM than the installation CDROM, and when "
#~ "it\n"
#~ "needs that you put another one into the drive, it will eject the current "
#~ "CDROM\n"
#~ "and ask you for another one."
#~ msgstr ""
#~ "Mandrake Linux er fordelt p� flere cdrom-er. Muligvis har drakX valgt \n"
#~ "pakker p� en anden cdrom end installations-cdrommen, og n�r den har "
#~ "brug \n"
#~ "for at du s�tter en anden cdrom i drevet, vil den udskyde den aktuelle "
#~ "cdrom \n"
#~ "og bede dig om en anden."

#~ msgid ""
#~ "drakX just skips this test unless you purposely click on the "
#~ "corresponding step\n"
#~ "on the left. By default, drakX sees your mouse as a two-button mouse and\n"
#~ "emulates the third button, and knows whether it's PS/2, serial or USB.\n"
#~ "\n"
#~ "Perhaps this is not what you want. In that case, you just have to select "
#~ "the\n"
#~ "right type for your mouse in the list which appears.\n"
#~ "\n"
#~ "You can now test your mouse. Use buttons and wheel to verify if settings "
#~ "are\n"
#~ "good. If not, you can click on \"Cancel\" to choose another driver."
#~ msgstr ""
#~ "drakX overspringer blot denne test medmindre du med vilje klikker p� "
#~ "det \n"
#~ "tilsvarende trin til venstre. Normalt ser drakX din mus som en to-"
#~ "knapsmus og \n"
#~ "emulerer den tredje knap, og den v�d om den er PS/2, seriel eller USB.\n"
#~ "\n"
#~ "M�ske er dette ikke hvad du vil �nsker. I s� fald beh�ver du blot at "
#~ "v�lge \n"
#~ "den rigtige type mus fra den viste liste.\n"
#~ "\n"
#~ "Du kan nu afpr�ve din mus. Brug knapper og hjul for at efterpr�ve om \n"
#~ "indstillingerne er gode. Hvis ikke, kan du klikke p� 'annull�r' for at "
#~ "v�lge \n"
#~ "en anden driver."

#~ msgid "Could not set \"%s\" as the default printer!"
#~ msgstr "Kunne ikke s�tte '%s' til standard-printer!"

#~ msgid "Spooler: "
#~ msgstr "Skriverk�-behandler: "

#~ msgid "Test the mouse here."
#~ msgstr "Test musen her."

#~ msgid "Press next to continue."
#~ msgstr "Tryk n�ste for at forts�tte."

#~ msgid ""
#~ "You can now test your mouse. Use buttons and wheel to verify\n"
#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
#~ "another\n"
#~ "driver."
#~ msgstr ""
#~ "Du kan nu teste din mus. Brug knapperne og hjulet for sikre\n"
#~ "dig at det virker. Hvis ikke, s� klik p� \"Annull�r\" og v�lg en anden\n"
#~ "driver."

#~ msgid "DSL (or ADSL) connection"
#~ msgstr "DSL (eller ADSL) forbindelse"

#~ msgid "You can specify directly the URI to access the printer with CUPS."
#~ msgstr "Du kan direkte angive URI-en til at tilg� printeren via CUPS."

#~ msgid "Yes, print ASCII test page"
#~ msgstr "Ja, udskriv ASCII-testside"

#~ msgid "Yes, print PostScript test page"
#~ msgstr "Ja, udskriv PostScript-testside"

#~ msgid "Yes, print both test pages"
#~ msgstr "Ja, udskriv begge testsider"

#~ msgid "Paper Size"
#~ msgstr "Papirst�rrelse"

#~ msgid "Eject page after job?"
#~ msgstr "Skift side efter opgave?"

#~ msgid "Uniprint driver options"
#~ msgstr "Valgmuligheder for Uniprint driver"

#~ msgid "Color depth options"
#~ msgstr "Valgmuligheder for farvedybde"

#~ msgid "Print text as PostScript?"
#~ msgstr "Udskriv tekst som PostScript?"

#~ msgid "Fix stair-stepping text?"
#~ msgstr "Ordn trappetrins-tekst?"

#~ msgid "Number of pages per output pages"
#~ msgstr "Antal sider per udskriftsside"

#~ msgid "Right/Left margins in points (1/72 of inch)"
#~ msgstr "H�jre/venstre margener i punkter (1/72 tomme)"

#~ msgid "Top/Bottom margins in points (1/72 of inch)"
#~ msgstr "Top/bund margener i punkter (1/72 tomme)"

#~ msgid "Extra GhostScript options"
#~ msgstr "Ekstra valgmuligheder til GhostScript"

#~ msgid "Extra Text options"
#~ msgstr "Ekstra valgmuligheder til tekst"

#~ msgid "Reverse page order"
#~ msgstr "Omvendt sideorden"

#~ msgid "CUPS starting"
#~ msgstr "CUPS starter"

#~ msgid "Reading CUPS drivers database..."
#~ msgstr "L�ser CUPS driver database..."

#~ msgid "Select Remote Printer Connection"
#~ msgstr "V�lg fjernprinter-forbindelse"

#~ msgid ""
#~ "With a remote CUPS server, you do not have to configure\n"
#~ "any printer here; printers will be automatically detected.\n"
#~ "In case of doubt, select \"Remote CUPS server\"."
#~ msgstr ""
#~ "Med en fjern CUPS server beh�ver du ikke at konfigurere\n"
#~ "nogen printere; printere vil automatisk blive fundet.\n"
#~ "Hvis du er i tvivl, s� v�lg \"Fjern CUPS server\"."

#~ msgid ""
#~ "Every printer need a name (for example lp).\n"
#~ "Other parameters such as the description of the printer or its location\n"
#~ "can be defined. What name should be used for this printer and\n"
#~ "how is the printer connected?"
#~ msgstr ""
#~ "Hver printer beh�ver et navn (fx lp)\n"
#~ "Andre parametre s�som beskrivelse af printeren eller dens placering\n"
#~ "kan defineres. Hvilket navn skal bruges for denne printer, og hvordan\n"
#~ "er printeren forbundet?"

#~ msgid ""
#~ "Every print queue (which print jobs are directed to) needs a\n"
#~ "name (often lp) and a spool directory associated with it. What\n"
#~ "name and directory should be used for this queue and how is the printer "
#~ "connected?"
#~ msgstr ""
#~ "Alle printk�er (som bruges til en print-opgave) beh�ver et\n"
#~ "navn (ofte lp) og et mellemlagringskatalog knyttet til det. Hvilket\n"
#~ "navn og katalog skal bruges til denne k�, og hvordan er k�en forbundet?"

#~ msgid "Name of queue"
#~ msgstr "k�navn"

#~ msgid "Spool directory"
#~ msgstr "Mellemlagrings-katalog"

#~ msgid "Provider dns 1"
#~ msgstr "Udbyder DNS 1"

#~ msgid "Provider dns 2"
#~ msgstr "Udbyder DNS 2"

#~ msgid ""
#~ "To enable a more secure system, you should select \"Use shadow file\" "
#~ "and\n"
#~ "\"Use MD5 passwords\"."
#~ msgstr ""
#~ "For at f� et mere sikkert system, b�r du v�lge \"Benyt skygge-fil\" og\n"
#~ "\"Benyt MD5-adgangkoder\"."

#~ msgid ""
#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
#~ "your\n"
#~ "network administrator."
#~ msgstr ""
#~ "Hvis dit netv�rk benytter NIS, v�lg \"Benyt NIS\". Hvis du ikke ved det,\n"
#~ "kan du sp�rge din netv�rksadministrator."

#~ msgid "yellow pages"
#~ msgstr "gule sider"

#~ msgid "How do you want to connect to the Internet?"
#~ msgstr "Hvordan vil du lave forbindelse til Internettet?"

#~ msgid "cannot fork: "
#~ msgstr "kan ikke dele: "

#~ msgid "Lilo/Grub configuration"
#~ msgstr "LAN konfiguration"

#~ msgid "Selected size %d%s"
#~ msgstr "Valgt st�rrelse %d%s"

#~ msgid "Opening your connection..."
#~ msgstr "�bner din forbindelse..."

#~ msgid "Configure..."
#~ msgstr "Konfigur�r..."

#~ msgid "Standard tools"
#~ msgstr "Standardv�rkt�jer"

#~ msgid "This startup script try to load your modules for your usb mouse."
#~ msgstr "Denne opstartsfil pr�ver at indl�se modulet til din USB-mus"

#~ msgid "Boot style configuration"
#~ msgstr "Konfiguration af opstartsudseende"

#~ msgid ""
#~ "Now that your Internet connection is configured,\n"
#~ "your computer can be configured to share its Internet connection.\n"
#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
#~ "(LAN).\n"
#~ "\n"
#~ "Would you like to setup the Internet Connection Sharing?\n"
#~ msgstr ""
#~ "Nu da din internetforbindelse er konfigureret,\n"
#~ "kan din maskine blive konfigureret til at dele sin internetforbindelse.\n"
#~ "Info: Du skal bruge en ekstra netv�rks adapter for at s�tte et lokalnet "
#~ "op (LAN).\n"
#~ "\n"
#~ "�nsker du at ops�tte deling af internetforbindelsen?\n"

#~ msgid "Welcome to the Internet Connection Sharing utility!"
#~ msgstr "Deling af internetforbindelse"

#~ msgid "Automatic dependencies"
#~ msgstr "Automatiske afh�ngigheder"

#~ msgid "Configure LILO/GRUB"
#~ msgstr "Konfigur�r X"

#~ msgid "Create a boot floppy"
#~ msgstr "Opret opstartsdiskette"

#~ msgid "Format floppy"
#~ msgstr "Format�r diskette"

#~ msgid "Choice"
#~ msgstr "Valg"

#~ msgid "horizontal nice looking aurora"
#~ msgstr "horisontal og fin aurora"

#~ msgid "vertical traditional aurora"
#~ msgstr "vertikal og traditionel aurora"

#~ msgid "gMonitor"
#~ msgstr "gMonitor"

#~ msgid ""
#~ "You can now select some miscellaneous options for your system.\n"
#~ "\n"
#~ "* Use hard drive optimizations: this option can improve hard disk "
#~ "performance but is only for advanced users. Some buggy\n"
#~ "  chipsets can ruin your data, so beware. Note that the kernel has a "
#~ "builtin blacklist of drives and chipsets, but if\n"
#~ "  you want to avoid bad surprises, leave this option unset.\n"
#~ "\n"
#~ "\n"
#~ "* Choose security level: you can choose a security level for your system. "
#~ "Please refer to the manual for complete\n"
#~ "  information. Basically, if you don't know what to choose, keep the "
#~ "default option.\n"
#~ "\n"
#~ "\n"
#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
#~ "ask the BIOS about the amount of RAM present in\n"
#~ "  your computer. As consequence, Linux may fail to detect your amount of "
#~ "RAM correctly. If this is the case, you can\n"
#~ "  specify the correct amount or RAM here. Please note that a difference "
#~ "of 2 or 4 MB between detected memory and memory\n"
#~ "  present in your system is normal.\n"
#~ "\n"
#~ "\n"
#~ "* Removable media automounting: if you would prefer not to manually mount "
#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
#~ "  typing \"mount\" and \"umount\", select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
#~ "directories stored in \"/tmp\" when you boot your system,\n"
#~ "  select this option.\n"
#~ "\n"
#~ "\n"
#~ "* Enable num lock at startup: if you want NumLock key enabled after "
#~ "booting, select this option. Please note that you\n"
#~ "  should not enable this option on laptops and that NumLock may or may "
#~ "not work under X."
#~ msgstr ""
#~ "Du kan nu v�lge nogen forskellige muligheder for dit system.\n"
#~ "\n"
#~ "* Brug harddisk-optimering: Denne mulighed kan forbedre disk-ydelsen, men "
#~ "er kun for erfarne brugere: nogen ustabile\n"
#~ "  chip-s�t kan �del�gge dine data, s� v�r forsigtig. Bem�rk at kernen har "
#~ "en indbygget sortliste over diske og chip-s�t,\n"
#~ "  men hvis du vil undg� slemme overraskelser, s� lad denne mulighed v�re "
#~ "sl�et fra.\n"
#~ "\n"
#~ "\n"
#~ "* V�lg sikkerhedsniveau: Du kan v�lge et sikkerhedsniveau for dit system. "
#~ "Se i manualen for mere information. \n"
#~ "  Basis: hvis du ikke v�d hvad du skal v�lge, s� brug standard valg.\n"
#~ "\n"
#~ "\n"
#~ "* Pr�cis�r RAM-st�rrelse om n�dvendigt: desv�rre er der ingen "
#~ "standardmetode for at sp�rge BIOS om m�ngden af RAM i din maskine.\n"
#~ "  Som en konsekvens kan det mislykkes for Linux at finde hvor meget RAM "
#~ "du har. Hvis dette er tilf�ldet, kan du specifisere rigtig\n"
#~ "  RAM-m�ngde her. Bem�rk at en difference p� 2 eller 4 MB mellem "
#~ "hukommelse som er fundet og hukommelse i systemet\n"
#~ "  er normalt.\n"
#~ "\n"
#~ "\n"
#~ "* Fjerneligt media automontering: Hvis du �nsker at ikke montere "
#~ "fjernelige medier manuelt (CD-ROM, diskette, Zip) ved at skrive\n"
#~ " \"mount\" og \"umount\", v�lg denne mulighed.\n"
#~ "\n"
#~ "\n"
#~ "* T�m \"/tmp\" ved hver opstart: hvis du �nsker at slette alle filer og "
#~ "kataloger lagret i \"/tmp\" n�r du starter dit system op,\n"
#~ "  s� v�lg denne mulighed.\n"
#~ "\n"
#~ "\n"
#~ "* Aktiv�r NumLock ved opstart: Hvis du �nsker NumLock aktiveret efter "
#~ "opstart, s� v�lg denne mulighed. Bem�rk at du ikke burde aktivere\n"
#~ "  denne funktion p� b�rbare og at NumLock m�ske/m�ske ikke vil virke "
#~ "under X."

#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
#~ msgstr ""
#~ "Beklager, mailkonfigurationen er endnu ikke implementeret. Venlist v�r "
#~ "t�lmodig."

#~ msgid ""
#~ "Welcome to The Network Configuration Wizard.\n"
#~ "Which components do you want to configure?\n"
#~ msgstr ""
#~ "Velkommen til netv�rkskonfigurationsvejviseren.\n"
#~ "Hvilke komponenter �nsker du at konfigurere?\n"

#~ msgid "Internet/Network access"
#~ msgstr "Internetadgang"

#~ msgid "Mail information"
#~ msgstr "Vis information"

#~ msgid "Firewall Configuration Wizard"
#~ msgstr "Brandmurskonfiguration"

#~ msgid "Miscellaneous"
#~ msgstr "Diverse"

#~ msgid "Miscellaneous questions"
#~ msgstr "Forskellige sp�rgsm�l"

#~ msgid "Can't use supermount in high security level"
#~ msgstr "Kan ikke bruge supermontering p� h�jt sikkerhedsniveau"

#~ msgid ""
#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
#~ "More generally, do not expect to use your machine for anything but as a "
#~ "server.\n"
#~ "You have been warned."
#~ msgstr ""
#~ "Bem�rk: I DETTE SIKKERHEDSNIVEAU ER ROOT-INDLOGNING P� KONSOL IKKE "
#~ "TILLADT!\n"
#~ "Hvis du �nsker at v�re root m� du logge ind som bruger for s� at bruge "
#~ "\"su\".\n"
#~ "Mere generelt, forvent ikke at bruge din maskine til andet end en "
#~ "server.\n"
#~ "Du er blevet advaret."

#~ msgid ""
#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
#~ msgstr ""
#~ "V�r forsigtig, at have numlock sl�et til for�rsager at mange af tasterne\n"
#~ "giver tal istedetfor almindelige bogstaver (f.eks: `p' giver `6')"

#~ msgid "not connected"
#~ msgstr "ikke tilsluttet"

#~ msgid "Actions"
#~ msgstr "Handlinger"

#~ msgid "Scientific applications"
#~ msgstr "Videnskabelige programmer"

#~ msgid "toot"
#~ msgstr "toot"

#~ msgid "File/Print/Samba"
#~ msgstr "Fil/Udskrift/Samba"

#~ msgid "DNS/DHCP "
#~ msgstr "Server, DNS/DHCP"

#~ msgid "First DNS Server"
#~ msgstr "F�rste DNS-server"

#~ msgid "Second DNS Server"
#~ msgstr "Anden DNS-server"

#~ msgid "using module"
#~ msgstr "anvender modul"

#~ msgid "Development, Database"
#~ msgstr "Udvikling, database"

#~ msgid "Development, Integrated Environment"
#~ msgstr "Udvikling, Integreret milj�"

#~ msgid "Development, Standard tools"
#~ msgstr "Udvikling, standardv�rkt�jer"