# translation of bs.po to Bosnian # translation of libDrakX-bs.po to Bosnian # translation of bs.po to Bosanski # translation of DrakX-bs.po to Bosanski # Copyright (C) 2001, 2003, 2004, 2005, 2006. Free Software Foundation, Inc. # Amila Akagić , 06. 2001. # Vedran Ljubovic , 2002, 2003, 2004, 2005, 2006. # msgid "" msgstr "" "Project-Id-Version: bs\n" "POT-Creation-Date: 2008-03-11 16:47+0100\n" "PO-Revision-Date: 2006-09-13 19:15+0200\n" "Last-Translator: Vedran Ljubovic \n" "Language-Team: Bosnian \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.10.2\n" #: any.pm:245 diskdrake/interactive.pm:552 diskdrake/interactive.pm:739 #: diskdrake/interactive.pm:783 diskdrake/interactive.pm:841 #: diskdrake/interactive.pm:1132 do_pkgs.pm:216 do_pkgs.pm:258 #: harddrake/sound.pm:202 interactive.pm:580 #, c-format msgid "Please wait" msgstr "Molim sačekajte" #: any.pm:245 #, c-format msgid "Bootloader installation in progress" msgstr "Instalacija bootloadera u toku" #: any.pm:256 #, c-format msgid "" "LILO wants to assign a new Volume ID to drive %s. However, changing\n" "the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows " "error.\n" "This caution does not apply to Windows 95 or 98, or to NT data disks.\n" "\n" "Assign a new Volume ID?" msgstr "" "LILO će sada pridružiti novi Volume ID disku %s. Promjena Volume ID\n" "na startnom disku za Windows NT, 2000 ili XP sisteme je fatalna\n" "greška.\n" "Ovo upozorenje se ne odnosi na Windows 95 ili 98, te na NT diskove sa " "podacima.\n" "\n" "Da li da podesim novi ID volumena?" #: any.pm:267 #, c-format msgid "Installation of bootloader failed. The following error occurred:" msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:" #: any.pm:273 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you do not see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "Možda ćete trebati promijeniti vaš Open Firmware boot uređaj\n" " da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n" " prilikom bootanja, držite Command-Option-O-F prilikom boota\n" " i unesite:\n" " setenv boot-device %s,\\\\:tbxi\n" " Zatim kucajte: shut-down\n" "Prilikom idućeg boota biste trebali vidjeti upit bootloadera." #: any.pm:311 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" "Odlučili ste da na particiju instalirate bootloader.\n" "Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate " "(npr: System Commander).\n" "\n" "Sa kojeg diska vršite boot?" #: any.pm:334 #, c-format msgid "First sector of drive (MBR)" msgstr "Prvi sektor diska (MBR)" #: any.pm:335 #, c-format msgid "First sector of the root partition" msgstr "Prvi sektor root particije" #: any.pm:337 #, c-format msgid "On Floppy" msgstr "Na disketi" #: any.pm:339 #, c-format msgid "Skip" msgstr "Preskoči" #: any.pm:343 #, c-format msgid "LILO/grub Installation" msgstr "LILO/grub instalacija" #: any.pm:345 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Gdje želite smjestiti bootloader?" #: any.pm:372 #, c-format msgid "Boot Style Configuration" msgstr "Konfiguracija stila boota" #: any.pm:382 any.pm:414 any.pm:415 #, c-format msgid "Bootloader main options" msgstr "Glavne opcije bootloadera" #: any.pm:387 #, c-format msgid "Bootloader" msgstr "Bootloader" #: any.pm:388 any.pm:419 #, c-format msgid "Bootloader to use" msgstr "Bootloader koji ćete koristiti" #: any.pm:390 any.pm:421 #, c-format msgid "Boot device" msgstr "Boot uređaj" #: any.pm:392 #, c-format msgid "Main options" msgstr "Glavne opcije" #: any.pm:393 #, c-format msgid "Delay before booting default image" msgstr "Pauza prije pokretanja izabrane opcije" #: any.pm:394 #, c-format msgid "Enable ACPI" msgstr "Uključi ACPI" #: any.pm:395 #, c-format msgid "Enable APIC" msgstr "Uključi APIC" #: any.pm:396 #, c-format msgid "Enable Local APIC" msgstr "Uključi Local APIC" #: any.pm:398 any.pm:785 any.pm:794 authentication.pm:197 #: diskdrake/smbnfs_gtk.pm:181 #, c-format msgid "Password" msgstr "Šifra" #: any.pm:400 authentication.pm:208 #, c-format msgid "The passwords do not match" msgstr "Šifre se ne poklapaju" #: any.pm:400 authentication.pm:208 diskdrake/interactive.pm:1299 #, c-format msgid "Please try again" msgstr "Molim pokušajte ponovo" #: any.pm:401 #, fuzzy, c-format msgid "You can not use a password with %s" msgstr "Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s" #: any.pm:404 any.pm:787 any.pm:796 authentication.pm:198 #, c-format msgid "Password (again)" msgstr "Šifra (ponovo)" #: any.pm:405 #, c-format msgid "Restrict command line options" msgstr "Ograniči opcije komandne linije" #: any.pm:405 #, c-format msgid "restrict" msgstr "ograniči" #: any.pm:406 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre" #: any.pm:408 #, c-format msgid "Clean /tmp at each boot" msgstr "Očisti /tmp prilikom svakog starta" #: any.pm:409 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)" #: any.pm:410 #, c-format msgid "Give the ram size in MB" msgstr "Navedite veličinu rama u MB" #: any.pm:420 #, c-format msgid "Init Message" msgstr "Init poruka" #: any.pm:422 #, c-format msgid "Open Firmware Delay" msgstr "Čekanje na Open Firmware" #: any.pm:423 #, c-format msgid "Kernel Boot Timeout" msgstr "Vrijeme za boot kernela" #: any.pm:424 #, c-format msgid "Enable CD Boot?" msgstr "Omogući boot sa CDa?" #: any.pm:425 #, c-format msgid "Enable OF Boot?" msgstr "Omogući boot sa OFa?" #: any.pm:426 #, c-format msgid "Default OS?" msgstr "Podrazumjevani OS?" #: any.pm:493 #, c-format msgid "Image" msgstr "Image" #: any.pm:494 any.pm:507 #, c-format msgid "Root" msgstr "Root" #: any.pm:495 any.pm:520 #, c-format msgid "Append" msgstr "Append" #: any.pm:497 #, c-format msgid "Xen append" msgstr "Xen append" #: any.pm:500 #, c-format msgid "Video mode" msgstr "Video režim" #: any.pm:502 #, c-format msgid "Initrd" msgstr "Initrd" #: any.pm:503 #, c-format msgid "Network profile" msgstr "Mrežni profil" #: any.pm:512 any.pm:517 any.pm:519 diskdrake/interactive.pm:374 #, c-format msgid "Label" msgstr "Oznaka" #: any.pm:514 any.pm:522 harddrake/v4l.pm:438 #, c-format msgid "Default" msgstr "Default" #: any.pm:521 #, c-format msgid "NoVideo" msgstr "NoVideo" #: any.pm:532 #, c-format msgid "Empty label not allowed" msgstr "Prazna oznaka nije dozvoljena" #: any.pm:533 #, c-format msgid "You must specify a kernel image" msgstr "Morate navesti image kernela" #: any.pm:533 #, c-format msgid "You must specify a root partition" msgstr "Morate navesti root particiju" #: any.pm:534 #, c-format msgid "This label is already used" msgstr "Ova oznaka je već u upotrebi" #: any.pm:552 #, c-format msgid "Which type of entry do you want to add?" msgstr "Koju vrstu opcije želite dodati?" #: any.pm:553 #, c-format msgid "Linux" msgstr "Linux" #: any.pm:553 #, c-format msgid "Other OS (SunOS...)" msgstr "Ostali OSi (SunOS...)" #: any.pm:554 #, c-format msgid "Other OS (MacOS...)" msgstr "Ostali OSi (MacOS...)" #: any.pm:554 #, c-format msgid "Other OS (Windows...)" msgstr "Ostali OSi (Windows...)" #: any.pm:582 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "Ovo su trenutne opcije u vašem boot meniju.\n" "Možete dodati nove ili promijeniti postojeće." #: any.pm:745 #, c-format msgid "access to X programs" msgstr "pristup X programima" #: any.pm:746 #, c-format msgid "access to rpm tools" msgstr "pristup rpm alatima" #: any.pm:747 #, c-format msgid "allow \"su\"" msgstr "dozvoli \"su\"" #: any.pm:748 #, c-format msgid "access to administrative files" msgstr "pristup administrativnim datotekama" #: any.pm:749 #, c-format msgid "access to network tools" msgstr "pristup mrežnim alatima" #: any.pm:750 #, c-format msgid "access to compilation tools" msgstr "pristup alatima za kompajliranje" #: any.pm:756 #, c-format msgid "(already added %s)" msgstr "(već dodan %s)" #: any.pm:762 #, c-format msgid "Please give a user name" msgstr "Molim navedite korisničko ime" #: any.pm:763 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'" #: any.pm:764 #, c-format msgid "The user name is too long" msgstr "Korisničko ime je predugačko" #: any.pm:765 #, c-format msgid "This user name has already been added" msgstr "Ovo korisničko ime je već dodano" #: any.pm:771 any.pm:798 #, c-format msgid "User ID" msgstr "Korisnički ID" #: any.pm:771 any.pm:799 #, c-format msgid "Group ID" msgstr "Grupni ID" #: any.pm:772 #, c-format msgid "%s must be a number" msgstr "Opcija %s mora biti broj" #: any.pm:773 #, c-format msgid "%s should be above 500. Accept anyway?" msgstr "%s mora biti veće od 500. Svejedno prihvati?" #: any.pm:777 #, fuzzy, c-format msgid "User management" msgstr "Korisničko ime" #: any.pm:784 authentication.pm:183 #, c-format msgid "Set administrator (root) password" msgstr "Podesite administratorsku (root) šifru" #: any.pm:789 #, fuzzy, c-format msgid "Enter a user" msgstr "" "Unesite korisnika\n" "%s" #: any.pm:790 #, c-format msgid "Real name" msgstr "Pravo ime" #: any.pm:793 #, c-format msgid "Login name" msgstr "Korisničko ime" #: any.pm:797 #, c-format msgid "Shell" msgstr "Shell" #: any.pm:835 security/l10n.pm:14 #, c-format msgid "Autologin" msgstr "Autologin" #: any.pm:836 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "Mogu podesiti vaš računar da automatski prijavi jednog korisnika." #: any.pm:837 #, c-format msgid "Use this feature" msgstr "Koristi ovu mogućnost" #: any.pm:838 #, c-format msgid "Choose the default user:" msgstr "Izaberite default korisnika:" #: any.pm:839 #, c-format msgid "Choose the window manager to run:" msgstr "Izaberite window manager koji će se pokretati:" #: any.pm:862 any.pm:912 #, c-format msgid "Release Notes" msgstr "Napomene izdanja" #: any.pm:869 any.pm:1201 interactive/gtk.pm:766 #, c-format msgid "Close" msgstr "Zatvori" #: any.pm:905 #, c-format msgid "License agreement" msgstr "Licencni ugovor" #: any.pm:908 diskdrake/dav.pm:26 #, c-format msgid "Quit" msgstr "Izlaz" #: any.pm:915 #, c-format msgid "Accept" msgstr "Prihvatam" #: any.pm:915 #, c-format msgid "Refuse" msgstr "Ne prihvatam" #: any.pm:930 any.pm:996 #, c-format msgid "Please choose a language to use." msgstr "Molim izaberite jezik koji ćete koristiti." #: any.pm:931 any.pm:997 #, c-format msgid "Language choice" msgstr "Izbor jezika" #: any.pm:961 #, c-format msgid "" "Mandriva Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "Mandriva Linux podržava više jezika. Izaberite jezike koje\n" "želite instalirati. Oni će biti dostupni kada se završi vaša\n" "instalacija i restartujete vaš sistem." #: any.pm:964 #, c-format msgid "Multi languages" msgstr "Višejezična podrška" #: any.pm:975 any.pm:1005 #, c-format msgid "Old compatibility (non UTF-8) encoding" msgstr "Kompatibilnost sa starim (ne-UTF8) kodiranjem" #: any.pm:977 #, c-format msgid "All languages" msgstr "Svi jezici" #: any.pm:1052 #, c-format msgid "Country / Region" msgstr "Država / Oblast" #: any.pm:1054 #, c-format msgid "Please choose your country." msgstr "Molim izaberite vašu državu." #: any.pm:1056 #, c-format msgid "Here is the full list of available countries" msgstr "Ovdje je puna lista svih dostupnih država" #: any.pm:1057 #, c-format msgid "Other Countries" msgstr "Ostale države" #: any.pm:1057 interactive.pm:481 #, c-format msgid "Advanced" msgstr "Više opcija" #: any.pm:1063 #, c-format msgid "Input method:" msgstr "Metod unosa:" #: any.pm:1066 #, c-format msgid "None" msgstr "Ništa" #: any.pm:1146 #, c-format msgid "No sharing" msgstr "Bez dijeljenja" #: any.pm:1146 #, c-format msgid "Allow all users" msgstr "Dozvoli svim korisnicima" #: any.pm:1146 #, c-format msgid "Custom" msgstr "Vlastito" #: any.pm:1150 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" "Želite li dozvoliti korisnicima da dijele (share) neke od njihovih " "direktorija?\n" "Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju " "\"Share\" u\n" "Konqueroru ili Nautilusu.\n" "\n" "\"Izaberi korisnike\" vam omogućuje da podesite ovu opciju zasebno za svakog " "korisnika.\n" #: any.pm:1162 #, c-format msgid "" "NFS: the traditional Unix file sharing system, with less support on Mac and " "Windows." msgstr "" "NFS: tradicionalni Unix sistem za dijeljenje datoteka, koji ima slabiju " "podršku na Macintoshu i Windowsu." #: any.pm:1165 #, c-format msgid "" "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux " "systems." msgstr "" "SMB: sistem za dijeljenje datoteka koji koristi Windows, Mac OS X i većina " "modernih Linux sistema." #: any.pm:1173 #, c-format msgid "" "You can export using NFS or SMB. Please select which you would like to use." msgstr "" "Možete eksportovati koristeći NFS ili Sambu. Molim izaberite sistem koji " "želite koristiti." #: any.pm:1201 #, c-format msgid "Launch userdrake" msgstr "Pokreni userdrake" #: any.pm:1203 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" "Dijeljenje na nivou korisnika koristi grupu \"fileshare\". \n" "Možete dodavati korisnike u ovu grupu pomoću userdrake-a." #: any.pm:1295 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Molim izvršite logout i zatim koristitite Ctrl-Alt-BackSpace" #: any.pm:1299 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" "Trebate se odjaviti i ponovo prijaviti na sistem kako bi izmjene stupile na " "snagu" #: any.pm:1334 #, c-format msgid "Timezone" msgstr "Vremenska zona" #: any.pm:1334 #, c-format msgid "Which is your timezone?" msgstr "Koja je vaša vremenska zona?" #: any.pm:1346 any.pm:1348 #, c-format msgid "Date, Clock & Time Zone Settings" msgstr "Postavke datuma, sata i vremenske zone" #: any.pm:1349 #, c-format msgid "What is the best time?" msgstr "Koje je vrijeme tačnije?" #: any.pm:1353 #, c-format msgid "%s (hardware clock set to UTC)" msgstr "%s (hardverski sat podešen na UTC)" #: any.pm:1354 #, c-format msgid "%s (hardware clock set to local time)" msgstr "%s (hardverski sat podešen na lokalno vrijeme)" #: any.pm:1356 #, c-format msgid "NTP Server" msgstr "NTP server" #: any.pm:1357 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "Automatska sinhronizacija vremena (koristeći NTP)" #: authentication.pm:24 #, c-format msgid "Local file" msgstr "Lokalna datoteka" #: authentication.pm:25 #, c-format msgid "LDAP" msgstr "LDAP" #: authentication.pm:26 #, c-format msgid "NIS" msgstr "NIS" #: authentication.pm:27 #, c-format msgid "Smart Card" msgstr "Smart Card" #: authentication.pm:28 authentication.pm:164 #, c-format msgid "Windows Domain" msgstr "Windows domena" #: authentication.pm:29 #, c-format msgid "Active Directory with SFU" msgstr "Active Directory sa SFU" #: authentication.pm:30 #, c-format msgid "Active Directory with Winbind" msgstr "Active Directory sa Winbind" #: authentication.pm:67 #, c-format msgid "Local file:" msgstr "Lokalna datoteka:" #: authentication.pm:67 #, c-format msgid "Use information stored in local files for all authentication" msgstr "" #: authentication.pm:68 #, c-format msgid "LDAP:" msgstr "LDAP:" #: authentication.pm:68 #, c-format msgid "" "Tells your computer to use LDAP for some or all authentication. LDAP " "consolidates certain types of information within your organization." msgstr "" "Govori vašem računaru da koristi LDAP za neke ili sve provjere identiteta. " "LDAP je sistem koji objedinjuje određene vrste informacija u vašoj " "organizaciji." #: authentication.pm:69 #, c-format msgid "NIS:" msgstr "NIS:" #: authentication.pm:69 #, c-format msgid "" "Allows you to run a group of computers in the same Network Information " "Service domain with a common password and group file." msgstr "" "Omogućuje vam da pokrećete grupu računara u istoj Network Information " "Service domeni sa zajedničkim datotekama šifara i grupa." #: authentication.pm:70 #, c-format msgid "Windows Domain:" msgstr "Windows domena:" #: authentication.pm:70 #, c-format msgid "" "Winbind allows the system to retrieve information and authenticate users in " "a Windows domain." msgstr "" "Winbind omogućuje dobavljanje informacija o korisnicima i provjeru " "identiteta putem Windows domene." #: authentication.pm:71 #, c-format msgid "Active Directory with SFU:" msgstr "Active Directory sa SFU:" #: authentication.pm:71 #, c-format msgid "With Kerberos and Ldap for authentication in Active Directory Server " msgstr "Sa Kerberosom i LDAPom za autenticiranje na Active Directory server " #: authentication.pm:72 #, c-format msgid "Active Directory with Winbind:" msgstr "Active Directory sa Winbind:" #: authentication.pm:72 #, c-format msgid "" "Winbind allows the system to authenticate users in a Windows Active " "Directory Server." msgstr "" "Winbind omogućuje sistemu da potvrđuje korisnike putem Windows Active " "Directory servera." #: authentication.pm:97 #, c-format msgid "Authentication LDAP" msgstr "Autentikacijski LDAP" #: authentication.pm:98 #, c-format msgid "LDAP Base dn" msgstr "LDAP Base dn" #: authentication.pm:99 #, c-format msgid "LDAP Server" msgstr "LDAP Server" #: authentication.pm:112 fsedit.pm:23 #, c-format msgid "simple" msgstr "jednostavno" #: authentication.pm:113 #, c-format msgid "TLS" msgstr "TLS" #: authentication.pm:114 #, c-format msgid "SSL" msgstr "SSL" #: authentication.pm:115 #, c-format msgid "security layout (SASL/Kerberos)" msgstr "sloj sigurnosti (SASL/Kerberos)" #: authentication.pm:122 authentication.pm:160 #, c-format msgid "Authentication Active Directory" msgstr "Provjera identiteta kroz Aktivni imenik (Active Directory)" #: authentication.pm:123 diskdrake/smbnfs_gtk.pm:182 #, c-format msgid "Domain" msgstr "Domena" #: authentication.pm:125 diskdrake/dav.pm:63 #, c-format msgid "Server" msgstr "Server" #: authentication.pm:126 #, c-format msgid "LDAP users database" msgstr "LDAP baza korisnika" #: authentication.pm:127 #, c-format msgid "Use Anonymous BIND " msgstr "Koristi anonimni BIND " #: authentication.pm:128 #, c-format msgid "LDAP user allowed to browse the Active Directory" msgstr "LDAP korisnik kojem je dozvoljeno pregledanje Aktivnog imenika" #: authentication.pm:129 #, c-format msgid "Password for user" msgstr "Šifra za korisnika" #: authentication.pm:141 #, c-format msgid "Authentication NIS" msgstr "Provjera identiteta putem NISa" #: authentication.pm:142 #, c-format msgid "NIS Domain" msgstr "NIS domen" #: authentication.pm:143 #, c-format msgid "NIS Server" msgstr "NIS server" #: authentication.pm:148 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" "Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrši:\n" " C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n" "i restartuje server. Takođe će vam trebati korisničko ime i šifra " "administratora domena da biste pridružili računar Windows(tm) domenu.\n" "Ako mreža još nije aktivirana, DrakX će pokušati pristupanje domenu tek " "nakon što prođete kroz korak podešavanja mreže.\n" "Ako ovo podešavanje iz nekog razloga ne uspije i prijava na domen ne bude " "izvršena, izvršite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći " "vašu Windows(tm) domenu, kao i administratorovo korisničko ime i šifru nakon " "pokretanja sistema.\n" "Naredba 'wbinfo -t' će provjeriti da li su vaši podaci ispravni." #: authentication.pm:160 #, c-format msgid "Authentication Windows Domain" msgstr "Autentikacijska Windows domena" #: authentication.pm:162 #, c-format msgid "Active Directory Realm " msgstr "Active Directory Realm " #: authentication.pm:165 #, c-format msgid "Domain Admin User Name" msgstr "Korisničko ime domenskog administratora" #: authentication.pm:166 #, c-format msgid "Domain Admin Password" msgstr "Administratorska šifra domena" #: authentication.pm:182 authentication.pm:199 #, c-format msgid "Authentication" msgstr "Metod autentikacije" #: authentication.pm:185 #, c-format msgid "Authentication method" msgstr "Authentication method" #. -PO: keep this short or else the buttons will not fit in the window #: authentication.pm:190 #, c-format msgid "No password" msgstr "Bez šifre" #: authentication.pm:211 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)" #: authentication.pm:352 #, c-format msgid "Can not use broadcast with no NIS domain" msgstr "Ne mogu koristiti broadcast bez NIS domene" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: bootloader.pm:900 #, c-format msgid "" "Welcome to the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait for default boot.\n" "\n" msgstr "" "Dobro dosli u izbornik operativnog sistema!\n" "\n" "Izaberite operativni sistem na listi iznad ili\n" "sacekajte da se pokrene podrazumjevani OS.\n" "\n" #: bootloader.pm:1050 #, c-format msgid "LILO with text menu" msgstr "LILO sa tekstualnim menijem" #: bootloader.pm:1051 #, c-format msgid "GRUB with graphical menu" msgstr "GRUB sa grafičkim menijem" #: bootloader.pm:1052 #, c-format msgid "GRUB with text menu" msgstr "GRUB sa tekstualnim menijem" #: bootloader.pm:1053 #, c-format msgid "Yaboot" msgstr "Yaboot" #: bootloader.pm:1054 #, c-format msgid "SILO" msgstr "" #: bootloader.pm:1135 #, c-format msgid "not enough room in /boot" msgstr "nema dovoljno prostora u /boot" #: bootloader.pm:1760 #, c-format msgid "You can not install the bootloader on a %s partition\n" msgstr "Ne možete instalirati bootloader na %s particiju\n" #: bootloader.pm:1813 #, c-format msgid "" "Your bootloader configuration must be updated because partition has been " "renumbered" msgstr "" "Konfiguracija vašeg bootloadera mora biti ažurirana pošto su particije " "renumerisane" #: bootloader.pm:1826 #, c-format msgid "" "The bootloader can not be installed correctly. You have to boot rescue and " "choose \"%s\"" msgstr "" "Ne mogu ispravno instalirati bootloader. Morate pokrenuti \"rescue\" sistem " "i izabrati \"%s\"" #: bootloader.pm:1827 #, c-format msgid "Re-install Boot Loader" msgstr "Reinstalacija bootloadera" #: common.pm:142 #, c-format msgid "B" msgstr "B" #: common.pm:142 #, c-format msgid "KB" msgstr "KB" #: common.pm:142 #, c-format msgid "MB" msgstr "MB" #: common.pm:142 #, c-format msgid "GB" msgstr "GB" #: common.pm:142 common.pm:151 #, c-format msgid "TB" msgstr "TB" #: common.pm:159 #, c-format msgid "%d minutes" msgstr "%d minuta" #: common.pm:161 #, c-format msgid "1 minute" msgstr "1 minuta" #: common.pm:163 #, c-format msgid "%d seconds" msgstr "%d sekundi" #: common.pm:335 #, c-format msgid "command %s missing" msgstr "naredba %s nedostaje" #: diskdrake/dav.pm:17 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" "WebDAV je protokol koji vam omogućuje da direktorij web servera\n" "montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n" "je web server podešen kao WebDAV server). Ako želite dodati WebDAV\n" "tačke montiranja, izaberite \"Novi\"." #: diskdrake/dav.pm:25 #, c-format msgid "New" msgstr "Novi" #: diskdrake/dav.pm:61 diskdrake/interactive.pm:380 diskdrake/smbnfs_gtk.pm:75 #, c-format msgid "Unmount" msgstr "Demontiraj" #: diskdrake/dav.pm:62 diskdrake/interactive.pm:377 diskdrake/smbnfs_gtk.pm:76 #, c-format msgid "Mount" msgstr "Montiraj" #: diskdrake/dav.pm:64 diskdrake/interactive.pm:371 #: diskdrake/interactive.pm:611 diskdrake/interactive.pm:629 #: diskdrake/interactive.pm:633 diskdrake/removable.pm:23 #: diskdrake/smbnfs_gtk.pm:79 #, c-format msgid "Mount point" msgstr "Tačka montiranja" #: diskdrake/dav.pm:65 diskdrake/interactive.pm:373 #: diskdrake/interactive.pm:987 diskdrake/removable.pm:24 #: diskdrake/smbnfs_gtk.pm:80 #, c-format msgid "Options" msgstr "Opcije" #: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:164 diskdrake/removable.pm:26 #: diskdrake/smbnfs_gtk.pm:82 interactive/http.pm:151 #, c-format msgid "Done" msgstr "Gotovo" #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:231 #: diskdrake/interactive.pm:244 diskdrake/interactive.pm:478 #: diskdrake/interactive.pm:483 diskdrake/interactive.pm:601 #: diskdrake/interactive.pm:859 diskdrake/interactive.pm:1033 #: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1049 #: diskdrake/interactive.pm:1299 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:19 #: do_pkgs.pm:24 do_pkgs.pm:40 do_pkgs.pm:56 do_pkgs.pm:61 fsedit.pm:223 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19 #: scanner.pm:94 scanner.pm:105 scanner.pm:112 scanner.pm:119 wizards.pm:95 #: wizards.pm:99 wizards.pm:121 #, c-format msgid "Error" msgstr "Greška" #: diskdrake/dav.pm:83 #, c-format msgid "Please enter the WebDAV server URL" msgstr "Molim unesite URL WebDAV servera" #: diskdrake/dav.pm:87 #, c-format msgid "The URL must begin with http:// or https://" msgstr "URL mora počinjati sa http:// ili https://" #: diskdrake/dav.pm:109 #, c-format msgid "Server: " msgstr "Server:" #: diskdrake/dav.pm:110 diskdrake/interactive.pm:451 #: diskdrake/interactive.pm:1179 diskdrake/interactive.pm:1259 #, c-format msgid "Mount point: " msgstr "Tačka montiranja: " #: diskdrake/dav.pm:111 diskdrake/interactive.pm:1266 #, c-format msgid "Options: %s" msgstr "Opcije: %s" #: diskdrake/hd_gtk.pm:53 diskdrake/interactive.pm:282 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106 #: fs/partitioning_wizard.pm:51 fs/partitioning_wizard.pm:205 #: fs/partitioning_wizard.pm:211 fs/partitioning_wizard.pm:251 #: fs/partitioning_wizard.pm:270 fs/partitioning_wizard.pm:275 #, c-format msgid "Partitioning" msgstr "Particioniranje" #: diskdrake/hd_gtk.pm:93 diskdrake/interactive.pm:1008 #: diskdrake/interactive.pm:1018 diskdrake/interactive.pm:1071 #, c-format msgid "Read carefully!" msgstr "Pročitajte pažljivo!" #: diskdrake/hd_gtk.pm:93 #, c-format msgid "Please make a backup of your data first" msgstr "Predlažemo da najprije napravite backup vaših podataka" #: diskdrake/hd_gtk.pm:94 diskdrake/interactive.pm:224 #, c-format msgid "Exit" msgstr "Izlaz" #: diskdrake/hd_gtk.pm:94 #, c-format msgid "Continue" msgstr "Nastavak" #: diskdrake/hd_gtk.pm:97 #, c-format msgid "" "If you plan to use aboot, be careful to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora " "(2048 sektora je dovoljno)\n" "na početku diska" #: diskdrake/hd_gtk.pm:160 interactive.pm:644 interactive/gtk.pm:744 #: interactive/gtk.pm:759 interactive/gtk.pm:779 ugtk2.pm:936 ugtk2.pm:937 #, c-format msgid "Help" msgstr "Pomoć" #: diskdrake/hd_gtk.pm:195 #, c-format msgid "Choose action" msgstr "Izaberi akciju" #: diskdrake/hd_gtk.pm:199 #, c-format msgid "" "You have one big Microsoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Imate jednu veliku Microsoft Windows particiju.\n" "Predlažem da najprije promijenite veličinu te particije\n" "(kliknite na nju, zatim na \"Promijeni veličinu\")" #: diskdrake/hd_gtk.pm:201 #, c-format msgid "Please click on a partition" msgstr "Kliknite na particiju" #: diskdrake/hd_gtk.pm:215 diskdrake/smbnfs_gtk.pm:63 #, c-format msgid "Details" msgstr "Detalji" #: diskdrake/hd_gtk.pm:263 #, c-format msgid "No hard drives found" msgstr "Nije pronađen nijedan hard disk" #: diskdrake/hd_gtk.pm:290 #, c-format msgid "Unknown" msgstr "Nepoznat" #: diskdrake/hd_gtk.pm:352 #, fuzzy, c-format msgid "Ext3" msgstr "Izlaz" #: diskdrake/hd_gtk.pm:352 #, fuzzy, c-format msgid "XFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:352 #, c-format msgid "Swap" msgstr "Swap" #: diskdrake/hd_gtk.pm:352 #, c-format msgid "SunOS" msgstr "SunOS" #: diskdrake/hd_gtk.pm:352 #, c-format msgid "HFS" msgstr "HFS" #: diskdrake/hd_gtk.pm:352 #, c-format msgid "Windows" msgstr "Windows" #: diskdrake/hd_gtk.pm:353 services.pm:158 #, c-format msgid "Other" msgstr "Ostalo" #: diskdrake/hd_gtk.pm:353 diskdrake/interactive.pm:1194 #, c-format msgid "Empty" msgstr "Prazno" #: diskdrake/hd_gtk.pm:357 #, c-format msgid "Filesystem types:" msgstr "Tipovi file sistema:" #: diskdrake/hd_gtk.pm:381 diskdrake/interactive.pm:287 #: diskdrake/interactive.pm:359 diskdrake/interactive.pm:508 #: diskdrake/interactive.pm:692 diskdrake/interactive.pm:750 #: diskdrake/interactive.pm:839 diskdrake/interactive.pm:881 #: diskdrake/interactive.pm:882 diskdrake/interactive.pm:1117 #: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1298 do_pkgs.pm:16 #: do_pkgs.pm:35 do_pkgs.pm:53 harddrake/sound.pm:286 #, c-format msgid "Warning" msgstr "Upozorenje" #: diskdrake/hd_gtk.pm:381 #, c-format msgid "This partition is already empty" msgstr "Ova particija je već prazna" #: diskdrake/hd_gtk.pm:390 #, c-format msgid "Use ``Unmount'' first" msgstr "Najprije koristite \"Demontiraj\"" #: diskdrake/hd_gtk.pm:390 #, fuzzy, c-format msgid "Use ``%s'' instead (in expert mode)" msgstr "Koristi \"%s\" umjesto toga" #: diskdrake/hd_gtk.pm:390 diskdrake/interactive.pm:372 #: diskdrake/interactive.pm:546 diskdrake/interactive.pm:1024 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48 #, c-format msgid "Type" msgstr "Vrsta" #: diskdrake/interactive.pm:195 #, c-format msgid "Choose another partition" msgstr "Izaberi drugu particiju" #: diskdrake/interactive.pm:195 #, c-format msgid "Choose a partition" msgstr "Izaberi particiju" #: diskdrake/interactive.pm:257 #, c-format msgid "Toggle to normal mode" msgstr "Prebaci u normalni mod" #: diskdrake/interactive.pm:257 #, c-format msgid "Toggle to expert mode" msgstr "Prebaci u ekspertni mod" #: diskdrake/interactive.pm:265 diskdrake/interactive.pm:275 #: diskdrake/interactive.pm:1102 #, c-format msgid "Confirmation" msgstr "Potvrda" #: diskdrake/interactive.pm:265 #, c-format msgid "Continue anyway?" msgstr "Svejedno nastavljate?" #: diskdrake/interactive.pm:270 #, c-format msgid "Quit without saving" msgstr "Izlaz bez spašavanja" #: diskdrake/interactive.pm:270 #, c-format msgid "Quit without writing the partition table?" msgstr "Izlazite bez pisanja tabele particija?" #: diskdrake/interactive.pm:275 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Želite li spasiti izmjene u /etc/fstab ?" #: diskdrake/interactive.pm:282 fs/partitioning_wizard.pm:251 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu" #: diskdrake/interactive.pm:287 #, c-format msgid "" "You should format partition %s.\n" "Otherwise no entry for mount point %s will be written in fstab.\n" "Quit anyway?" msgstr "" "Trebali biste formatirati particiju %s.\n" "U suprotnom tačka montiranja %s neće biti zapisana u fstab.\n" "Da svejedno izađem?" #: diskdrake/interactive.pm:300 #, c-format msgid "Clear all" msgstr "Obriši sve" #: diskdrake/interactive.pm:301 #, c-format msgid "Auto allocate" msgstr "Auto alokacija" #: diskdrake/interactive.pm:302 diskdrake/interactive.pm:350 #: interactive/curses.pm:512 #, c-format msgid "More" msgstr "Još" #: diskdrake/interactive.pm:307 #, c-format msgid "Hard drive information" msgstr "Informacije o hard disku" #: diskdrake/interactive.pm:339 #, c-format msgid "All primary partitions are used" msgstr "Sve primarne particije su u upotrebi" #: diskdrake/interactive.pm:340 #, c-format msgid "I can not add any more partitions" msgstr "Ne mogu dodati više particija" #: diskdrake/interactive.pm:341 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Da biste imali još particija, molim pobrišite jednu kako bi se mogla " "kreirati extended particija" #: diskdrake/interactive.pm:352 #, c-format msgid "Reload partition table" msgstr "Ponovo učitaj tabelu particija" #: diskdrake/interactive.pm:359 #, c-format msgid "Detailed information" msgstr "Detaljne informacije" #: diskdrake/interactive.pm:375 diskdrake/interactive.pm:705 #, c-format msgid "Resize" msgstr "Smanji" #: diskdrake/interactive.pm:376 #, c-format msgid "Format" msgstr "Formatiraj" #: diskdrake/interactive.pm:378 diskdrake/interactive.pm:791 #, c-format msgid "Add to RAID" msgstr "Dodaj na RAID" #: diskdrake/interactive.pm:379 diskdrake/interactive.pm:809 #, c-format msgid "Add to LVM" msgstr "Dodaj na LVM" #: diskdrake/interactive.pm:381 #, c-format msgid "Delete" msgstr "Obriši" #: diskdrake/interactive.pm:382 #, c-format msgid "Remove from RAID" msgstr "Ukloni sa RAIDa" #: diskdrake/interactive.pm:383 #, c-format msgid "Remove from LVM" msgstr "Ukloni sa LVMa" #: diskdrake/interactive.pm:384 #, c-format msgid "Modify RAID" msgstr "Modificiraj RAID" #: diskdrake/interactive.pm:385 #, c-format msgid "Use for loopback" msgstr "Koristi za loopback" #: diskdrake/interactive.pm:396 #, c-format msgid "Create" msgstr "Kreiraj" #: diskdrake/interactive.pm:440 diskdrake/interactive.pm:442 #, c-format msgid "Create a new partition" msgstr "Napravi novu particiju" #: diskdrake/interactive.pm:444 #, c-format msgid "Start sector: " msgstr "Početni sektor: " #: diskdrake/interactive.pm:447 diskdrake/interactive.pm:874 #, c-format msgid "Size in MB: " msgstr "Veličina u MB: " #: diskdrake/interactive.pm:449 diskdrake/interactive.pm:875 #, c-format msgid "Filesystem type: " msgstr "Tip datotečnog sistema: " #: diskdrake/interactive.pm:455 #, c-format msgid "Preference: " msgstr "Preference: " #: diskdrake/interactive.pm:458 #, c-format msgid "Logical volume name " msgstr "Naziv logičkog volumena " #: diskdrake/interactive.pm:478 #, c-format msgid "" "You can not create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" "Ne možete napraviti novu particiju\n" "(pošto ste dosegli maksimalan broj primarnih particija).\n" "Najprije uklonite primarnu particiju i napravite extended (proširenu) " "particiju." #: diskdrake/interactive.pm:508 #, c-format msgid "Remove the loopback file?" msgstr "Ukloniti loopback datoteku?" #: diskdrake/interactive.pm:530 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "Nakon promjene tipa particije %s, svi podaci na toj particiji će biti " "izgubljeni" #: diskdrake/interactive.pm:543 #, c-format msgid "Change partition type" msgstr "Izmjena tipa particije" #: diskdrake/interactive.pm:545 diskdrake/removable.pm:47 #, c-format msgid "Which filesystem do you want?" msgstr "Koji datotečni sistem želite?" #: diskdrake/interactive.pm:552 #, fuzzy, c-format msgid "Switching from %s to %s" msgstr "Prebacujem sa ext2 na ext3" #: diskdrake/interactive.pm:578 diskdrake/interactive.pm:581 #, c-format msgid "Which volume label?" msgstr "Naziv za disk/particiju" #: diskdrake/interactive.pm:582 #, c-format msgid "Label:" msgstr "Naziv:" #: diskdrake/interactive.pm:596 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Gdje želite montirati loopback datoteku %s?" #: diskdrake/interactive.pm:597 #, c-format msgid "Where do you want to mount device %s?" msgstr "Gdje želite montirati uređaj %s?" #: diskdrake/interactive.pm:602 #, c-format msgid "" "Can not unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za " "loopback.\n" "Najprije uklonite loopback" #: diskdrake/interactive.pm:632 #, c-format msgid "Where do you want to mount %s?" msgstr "Gdje želite montirati uređaj %s?" #: diskdrake/interactive.pm:656 diskdrake/interactive.pm:739 #: fs/partitioning_wizard.pm:145 fs/partitioning_wizard.pm:177 #, c-format msgid "Resizing" msgstr "Mijenjam veličinu" #: diskdrake/interactive.pm:656 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Izračunavam granice FAT filesistema" #: diskdrake/interactive.pm:692 #, c-format msgid "This partition is not resizeable" msgstr "Ovoj particiji ne možete mijenjati veličinu" #: diskdrake/interactive.pm:697 #, c-format msgid "All data on this partition should be backed-up" msgstr "Svi podaci na ovoj particiji bi trebali biti backupovani" #: diskdrake/interactive.pm:699 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni" #: diskdrake/interactive.pm:706 #, c-format msgid "Choose the new size" msgstr "Izaberite novu veličinu" #: diskdrake/interactive.pm:707 #, c-format msgid "New size in MB: " msgstr "Nova veličina u MB: " #: diskdrake/interactive.pm:708 #, c-format msgid "Minimum size: %s MB" msgstr "Minimalna veličina: %s MB" #: diskdrake/interactive.pm:709 #, c-format msgid "Maximum size: %s MB" msgstr "Maksimalna veličina: %s MB" #: diskdrake/interactive.pm:750 fs/partitioning_wizard.pm:185 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Microsoft Windows®" msgstr "" "Da bi se osigurao integritet podataka nakon promjene veličine, \n" "prilikom idućeg pokretanja Windows(TM) biće izvršena provjera datotečnog " "sistema" #: diskdrake/interactive.pm:791 #, c-format msgid "Choose an existing RAID to add to" msgstr "Izaberite postojeći RAID na koji ćete dodati" #: diskdrake/interactive.pm:793 diskdrake/interactive.pm:811 #, c-format msgid "new" msgstr "novi" #: diskdrake/interactive.pm:809 #, c-format msgid "Choose an existing LVM to add to" msgstr "Izaberite postojeći LVM na koji ćete dodati" #: diskdrake/interactive.pm:816 #, c-format msgid "LVM name?" msgstr "Naziv LVMa?" #: diskdrake/interactive.pm:839 #, c-format msgid "" "Physical volume %s is still in use.\n" "Do you want to move used physical extents on this volume to other volumes?" msgstr "" "Fizički volumen %s se još uvijek koristi.\n" "Želite li premjestiti korištene fizičke extents sa ovog volumena na druge " "volumene?" #: diskdrake/interactive.pm:841 #, c-format msgid "Moving physical extents" msgstr "Pomjeram fizičke extents" #: diskdrake/interactive.pm:859 #, c-format msgid "This partition can not be used for loopback" msgstr "Ova particija se ne može koristiti za loopback" #: diskdrake/interactive.pm:872 #, c-format msgid "Loopback" msgstr "Loopback" #: diskdrake/interactive.pm:873 #, c-format msgid "Loopback file name: " msgstr "Naziv loopback datoteke: " #: diskdrake/interactive.pm:878 #, c-format msgid "Give a file name" msgstr "Dajte naziv datoteke" #: diskdrake/interactive.pm:881 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "Datoteku već koristi drugi loopback, izaberite neku drugu" #: diskdrake/interactive.pm:882 #, c-format msgid "File already exists. Use it?" msgstr "Datoteka već postoji. Želite li je koristiti?" #: diskdrake/interactive.pm:914 diskdrake/interactive.pm:917 #, c-format msgid "Mount options" msgstr "Opcije montiranja" #: diskdrake/interactive.pm:924 #, c-format msgid "Various" msgstr "Razno" #: diskdrake/interactive.pm:989 #, c-format msgid "device" msgstr "uređaj" #: diskdrake/interactive.pm:990 #, c-format msgid "level" msgstr "nivo" #: diskdrake/interactive.pm:991 #, c-format msgid "chunk size in KiB" msgstr "veličina chunka u KiB" #: diskdrake/interactive.pm:1009 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Budite oprezni: ova operacija je opasna." #: diskdrake/interactive.pm:1024 #, c-format msgid "What type of partitioning?" msgstr "Koju vrstu particioniranja?" #: diskdrake/interactive.pm:1062 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" "Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu" #: diskdrake/interactive.pm:1071 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Tabela particija za uređaj %s će biti zapisana na disk!" #: diskdrake/interactive.pm:1097 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "Nakon formatiranja particije %s, svi podaci na toj particiji će biti " "izgubljeni" #: diskdrake/interactive.pm:1102 fs/partitioning.pm:49 #, c-format msgid "Check bad blocks?" msgstr "Provjeri loše blokove?" #: diskdrake/interactive.pm:1116 #, c-format msgid "Move files to the new partition" msgstr "Prebaci datoteke na novu particiju" #: diskdrake/interactive.pm:1116 #, c-format msgid "Hide files" msgstr "Sakrij datoteke" #: diskdrake/interactive.pm:1117 #, c-format msgid "" "Directory %s already contains data\n" "(%s)\n" "\n" "You can either choose to move the files into the partition that will be " "mounted there or leave them where they are (which results in hiding them by " "the contents of the mounted partition)" msgstr "" "Direktorij %s već sadrži podatke\n" "(%s)\n" "\n" "Možete izabrati da premjestite datoteke u particiju koja će biti montirana " "na to mjesto ili da ih ostavite gdje jesu (u kojem slučaju će oni biti " "sakriveni sadržajem montirane particije)" #: diskdrake/interactive.pm:1132 #, c-format msgid "Moving files to the new partition" msgstr "Premještam datoteke na novu particiju" #: diskdrake/interactive.pm:1136 #, c-format msgid "Copying %s" msgstr "Kopiram %s" #: diskdrake/interactive.pm:1140 #, c-format msgid "Removing %s" msgstr "Uklanjam %s" #: diskdrake/interactive.pm:1154 #, c-format msgid "partition %s is now known as %s" msgstr "particija %s je od sada poznata kao %s" #: diskdrake/interactive.pm:1155 #, c-format msgid "Partitions have been renumbered: " msgstr "Oznake particija su promijenjene: " #: diskdrake/interactive.pm:1180 diskdrake/interactive.pm:1243 #, c-format msgid "Device: " msgstr "Uređaj: " #: diskdrake/interactive.pm:1181 #, c-format msgid "Volume label: " msgstr "Naziv volumena: " #: diskdrake/interactive.pm:1182 #, c-format msgid "UUID: " msgstr "" #: diskdrake/interactive.pm:1183 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS slovo uređaja: %s (pretpostavka)\n" #: diskdrake/interactive.pm:1187 diskdrake/interactive.pm:1196 #: diskdrake/interactive.pm:1262 #, c-format msgid "Type: " msgstr "Vrsta: " #: diskdrake/interactive.pm:1191 diskdrake/interactive.pm:1247 #, c-format msgid "Name: " msgstr "Ime: " #: diskdrake/interactive.pm:1198 #, c-format msgid "Start: sector %s\n" msgstr "Početak: sector %s\n" #: diskdrake/interactive.pm:1199 #, c-format msgid "Size: %s" msgstr "Veličina: %s" #: diskdrake/interactive.pm:1201 #, c-format msgid ", %s sectors" msgstr ", %s sektora" #: diskdrake/interactive.pm:1203 #, c-format msgid "Cylinder %d to %d\n" msgstr "Cilindar %d do %d\n" #: diskdrake/interactive.pm:1204 #, c-format msgid "Number of logical extents: %d\n" msgstr "Broj logičkih extents: %d\n" #: diskdrake/interactive.pm:1205 #, c-format msgid "Formatted\n" msgstr "Formatirana\n" #: diskdrake/interactive.pm:1206 #, c-format msgid "Not formatted\n" msgstr "Nije formatirana\n" #: diskdrake/interactive.pm:1207 #, c-format msgid "Mounted\n" msgstr "Montirana\n" #: diskdrake/interactive.pm:1208 #, c-format msgid "RAID %s\n" msgstr "RAID %s\n" #: diskdrake/interactive.pm:1213 #, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "" "Loopback datoteka(e):\n" " %s\n" #: diskdrake/interactive.pm:1214 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Particija na kojoj se nalazi sistem\n" " (za MS-DOS/Windows)\n" #: diskdrake/interactive.pm:1216 #, c-format msgid "Level %s\n" msgstr "Nivo %s\n" #: diskdrake/interactive.pm:1217 #, c-format msgid "Chunk size %d KiB\n" msgstr "Veličina chunka %d KiB\n" #: diskdrake/interactive.pm:1218 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-diskovi %s\n" #: diskdrake/interactive.pm:1220 #, c-format msgid "Loopback file name: %s" msgstr "Naziv loopback datoteke: %s" #: diskdrake/interactive.pm:1223 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" "\n" "Postoji mogućnost da je ova\n" "particija Driver particija. Vjerovatno\n" "biste je trebali ostaviti na miru.\n" #: diskdrake/interactive.pm:1226 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "Ova posebna Bootstrap\n" "particija je za\n" "višestruki boot vašeg sistema.\n" #: diskdrake/interactive.pm:1235 #, c-format msgid "Free space on %s (%s)" msgstr "" #: diskdrake/interactive.pm:1244 #, c-format msgid "Read-only" msgstr "Samo za čitanje" #: diskdrake/interactive.pm:1245 #, c-format msgid "Size: %s\n" msgstr "Veličina: %s\n" #: diskdrake/interactive.pm:1246 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n" #: diskdrake/interactive.pm:1248 #, fuzzy, c-format msgid "Medium type: " msgstr "Tip datotečnog sistema: " #: diskdrake/interactive.pm:1249 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-diskovi %s\n" #: diskdrake/interactive.pm:1250 #, c-format msgid "Partition table type: %s\n" msgstr "Tip tabele particija: %s\n" #: diskdrake/interactive.pm:1251 #, c-format msgid "on channel %d id %d\n" msgstr "na kanalu %d id %d\n" #: diskdrake/interactive.pm:1294 #, c-format msgid "Filesystem encryption key" msgstr "Ključ za kodiranje datotečnog sistema" #: diskdrake/interactive.pm:1295 #, c-format msgid "Choose your filesystem encryption key" msgstr "Izaberite vaš ključ za kodiranje datotečnog sistema" #: diskdrake/interactive.pm:1298 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Ovaj ključ enkripcije je previše jednostavan (mora imati najmanje %d " "karaktera)" #: diskdrake/interactive.pm:1299 #, c-format msgid "The encryption keys do not match" msgstr "Ključevi enkripcije se ne poklapaju" #: diskdrake/interactive.pm:1302 #, c-format msgid "Encryption key" msgstr "Ključ enkripcije" #: diskdrake/interactive.pm:1303 #, c-format msgid "Encryption key (again)" msgstr "Ključ enkripcije (još jednom)" #: diskdrake/interactive.pm:1305 #, c-format msgid "Encryption algorithm" msgstr "Algoritam enkripcije" #: diskdrake/removable.pm:46 #, c-format msgid "Change type" msgstr "Promijeni tip" #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:126 interactive.pm:543 #: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160 #: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:408 ugtk2.pm:510 #: ugtk2.pm:519 ugtk2.pm:801 #, c-format msgid "Cancel" msgstr "Odustani" #: diskdrake/smbnfs_gtk.pm:164 #, c-format msgid "Can not login using username %s (bad password?)" msgstr "Ne mogu se prijaviti koristeći korisničko ime %s (pogrešna šifa?)" #: diskdrake/smbnfs_gtk.pm:168 diskdrake/smbnfs_gtk.pm:177 #, c-format msgid "Domain Authentication Required" msgstr "Potrebna je autentikacija na domeni" #: diskdrake/smbnfs_gtk.pm:169 #, c-format msgid "Which username" msgstr "Koje korisničko ime" #: diskdrake/smbnfs_gtk.pm:169 #, c-format msgid "Another one" msgstr "Još jedan" #: diskdrake/smbnfs_gtk.pm:178 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" "Molim unesite vaše korisničko ime, šifru i domen da biste pristupili ovom " "računaru." #: diskdrake/smbnfs_gtk.pm:180 #, c-format msgid "Username" msgstr "Korisničko ime" #: diskdrake/smbnfs_gtk.pm:206 #, c-format msgid "Search servers" msgstr "Traži servere" #: diskdrake/smbnfs_gtk.pm:211 #, c-format msgid "Search new servers" msgstr "Traži nove servere" #: do_pkgs.pm:16 do_pkgs.pm:53 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Paket %s treba biti instaliran. Da li ga želite instalirati?" #: do_pkgs.pm:19 do_pkgs.pm:40 do_pkgs.pm:56 #, c-format msgid "Could not install the %s package!" msgstr "Ne mogu instalirati paket %s!" #: do_pkgs.pm:24 do_pkgs.pm:61 #, c-format msgid "Mandatory package %s is missing" msgstr "Nedostaje obavezan paket %s" #: do_pkgs.pm:35 #, c-format msgid "The following packages need to be installed:\n" msgstr "Sljedeći paketi trebaju biti instalirani:\n" #: do_pkgs.pm:216 #, c-format msgid "Installing packages..." msgstr "Instaliram pakete..." #: do_pkgs.pm:258 #, c-format msgid "Removing packages..." msgstr "Uklanjam pakete..." #: fs/any.pm:17 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu " "kreirati novi file sistemi. Molim provjerite vaš hardware i pronađite uzrok " "greške" #: fs/any.pm:74 fs/partitioning_wizard.pm:59 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Morate imati FAT particiju montiranu na /boot/efi" #: fs/format.pm:62 fs/format.pm:69 #, c-format msgid "Formatting partition %s" msgstr "Formatiram particiju %s" #: fs/format.pm:66 #, c-format msgid "Creating and formatting file %s" msgstr "Kreiram i formatiram datoteku %s" #: fs/format.pm:119 #, c-format msgid "I do not know how to format %s in type %s" msgstr "Ne znam kako formatirati %s kao tip %s" #: fs/format.pm:124 fs/format.pm:126 #, c-format msgid "%s formatting of %s failed" msgstr "%s formatiranje %s nije uspjelo" #: fs/loopback.pm:24 #, c-format msgid "Circular mounts %s\n" msgstr "Kružno montiranje %s\n" #: fs/mount.pm:79 #, c-format msgid "Mounting partition %s" msgstr "Montiram particiju %s" #: fs/mount.pm:80 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "montiranje particije %s u direktoriju %s nije uspjelo" #: fs/mount.pm:85 fs/mount.pm:102 #, c-format msgid "Checking %s" msgstr "Provjeravam %s" #: fs/mount.pm:119 partition_table.pm:395 #, c-format msgid "error unmounting %s: %s" msgstr "greška u demontiranju %s: %s" #: fs/mount.pm:134 #, c-format msgid "Enabling swap partition %s" msgstr "Uključujem swap particiju %s" #: fs/mount_options.pm:115 #, c-format msgid "Use an encrypted file system" msgstr "Koristi šifrovani datotečni sistem" #: fs/mount_options.pm:117 #, c-format msgid "Flush write cache on file close" msgstr "" #: fs/mount_options.pm:119 #, c-format msgid "Enable group disk quota accounting and optionally enforce limits" msgstr "" "Aktiviraj praćenje grupnih kvota na disku i eventualnu primjenu ograničenja" #: fs/mount_options.pm:121 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu\n" "(npr. radi bržeg pristupa spool-u na news serverima)." #: fs/mount_options.pm:124 #, fuzzy, c-format msgid "" "Update inode access times on this filesystem in a more efficient way\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" "Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu\n" "(npr. radi bržeg pristupa spool-u na news serverima)." #: fs/mount_options.pm:127 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" "Može se montirati samo eksplicitno (tj.,\n" "opcija -a neće montirati i ovaj sistem)." #: fs/mount_options.pm:130 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "Nemoj interpretirati karakter ili blok uređaje na datotečnom sistemu." #: fs/mount_options.pm:132 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" "Ne dozvoli izvršenje binarnih datoteka na montiranom\n" "datotečnom sistemu. Ova opcija bi mogla biti korisna za server\n" "koji ima datotečne sisteme koji sadrže programe za druge arhitekture." #: fs/mount_options.pm:136 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" "Ne dozvoli bitima set-user-identifier i set-group-identifier\n" "da stupe na snagu. (Ovo se čini kao sigurno, ali je ustvari prilično\n" "nesigurno ako ste instalirali suidperl(1).)" #: fs/mount_options.pm:140 #, c-format msgid "Mount the file system read-only." msgstr "Montiraj datotečni sistem samo za čitanje." #: fs/mount_options.pm:142 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "Sav U/I na datotečni sistem se treba izvršavati sinhrono." #: fs/mount_options.pm:144 #, c-format msgid "Allow every user to mount and umount the file system." msgstr "Dozvoli svakom korisniku da (de)montira datotečni sistem." #: fs/mount_options.pm:146 #, c-format msgid "Allow an ordinary user to mount the file system." msgstr "Dozvoli običnom korisniku da montira datotečni sistem." #: fs/mount_options.pm:148 #, c-format msgid "Enable user disk quota accounting, and optionally enforce limits" msgstr "" "Aktiviraj praćenje korisničkih kvota na disku i eventualnu primjenu " "ograničenja" #: fs/mount_options.pm:150 #, c-format msgid "Support \"user.\" extended attributes" msgstr "Podrži \"user.\" proširene atribute" #: fs/mount_options.pm:152 #, c-format msgid "Give write access to ordinary users" msgstr "Daj dozvolu za pisanje običnim korisnicima" #: fs/mount_options.pm:154 #, c-format msgid "Give read-only access to ordinary users" msgstr "Daj dozvolu za čitanje običnim korisnicima" #: fs/mount_point.pm:80 #, c-format msgid "Duplicate mount point %s" msgstr "Dvostruka tačka montiranja %s" #: fs/mount_point.pm:95 #, c-format msgid "No partition available" msgstr "Nema dostupnih particija" #: fs/mount_point.pm:98 #, c-format msgid "Scanning partitions to find mount points" msgstr "Pretražujem particije da nađem tačke montiranja" #: fs/mount_point.pm:105 #, c-format msgid "Choose the mount points" msgstr "Izaberite tačke montiranja" #: fs/partitioning.pm:46 #, c-format msgid "Choose the partitions you want to format" msgstr "Izaberite particije koje želite formatirati" #: fs/partitioning.pm:76 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" "Nisam uspio provjeriti datotečni sistem %s. Želite li popraviti greške? " "(pažnja, možete izgubiti podatke)" #: fs/partitioning.pm:79 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "Nemam dovoljno swap prostora da dovršim instalaciju, molim dodajte još" #: fs/partitioning_wizard.pm:51 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Morate imati root particiju.\n" "Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).\n" "Zatim izaberite opciju \"Tačka montiranja\" i unesite vrijednost \"/\"" #: fs/partitioning_wizard.pm:56 #, c-format msgid "" "You do not have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Nemate nijednu swap particiju\n" "\n" "Da li da nastavim?" #: fs/partitioning_wizard.pm:84 #, c-format msgid "Use free space" msgstr "Koristi slobodan prostor" #: fs/partitioning_wizard.pm:86 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija" #: fs/partitioning_wizard.pm:94 #, c-format msgid "Use existing partitions" msgstr "Koristi postojeću particiju" #: fs/partitioning_wizard.pm:96 #, c-format msgid "There is no existing partition to use" msgstr "Nemate nijednu postojeću particiju za upotrebu" #: fs/partitioning_wizard.pm:103 #, c-format msgid "Use the Microsoft Windows® partition for loopback" msgstr "Koristi Microsoft Windows® particiju za loopback" #: fs/partitioning_wizard.pm:106 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Koju particiju želite koristiti za Linux4Win?" #: fs/partitioning_wizard.pm:108 #, c-format msgid "Choose the sizes" msgstr "Izaberite veličine" #: fs/partitioning_wizard.pm:109 #, c-format msgid "Root partition size in MB: " msgstr "Veličina root particije u MB: " #: fs/partitioning_wizard.pm:110 #, c-format msgid "Swap partition size in MB: " msgstr "Veličina swap particije u MB: " #: fs/partitioning_wizard.pm:119 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo " "dovoljno prostora)" #: fs/partitioning_wizard.pm:126 #, c-format msgid "Use the free space on the Microsoft Windows® partition" msgstr "Koristi slobodan prostor na Microsoft Windows® particiji" #: fs/partitioning_wizard.pm:128 #, c-format msgid "Which partition do you want to resize?" msgstr "Kojoj particiji želite promijeniti veličinu?" #: fs/partitioning_wizard.pm:142 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occurred: %s" msgstr "" "FAT resizer ne može izmijeniti vašu particiju, \n" "došlo je do sljedeće greške: %s" #: fs/partitioning_wizard.pm:145 #, c-format msgid "Computing the size of the Microsoft Windows® partition" msgstr "Izračunavam veličinu Microsoft Windows® particije" #: fs/partitioning_wizard.pm:152 #, c-format msgid "" "Your Microsoft Windows® partition is too fragmented. Please reboot your " "computer under Microsoft Windows®, run the ``defrag'' utility, then restart " "the Mandriva Linux installation." msgstr "" "Vaša Microsoft Windows® particija je previše fragmentirana. Molim " "restartujte vaš računar pod Microsoft Windows®, pokrenite program \"defrag\"," "zatim ponovo pokrenite Mandriva Linux instalaciju." #: fs/partitioning_wizard.pm:155 #, c-format msgid "" "WARNING!\n" "\n" "\n" "Your Microsoft Windows® partition will be now resized.\n" "\n" "\n" "Be careful: this operation is dangerous. If you have not already done so, " "you first need to exit the installation, run \"chkdsk c:\" from a Command " "Prompt under Microsoft Windows® (beware, running graphical program \"scandisk" "\" is not enough, be sure to use \"chkdsk\" in a Command Prompt!), " "optionally run defrag, then restart the installation. You should also backup " "your data.\n" "\n" "\n" "When sure, press %s." msgstr "" "UPOZORENJE!\n" "\n" " DrakX će sada promijeniti veličinu vaše Microsoft Windows® particije.\n" "\n" "\n" "Budite pažljivi, ova operacija je opasna. Ako to već niste uradili, najprije " "napustite instalaciju, izvršite naredbu \"chkdsk c:\" iz Command Prompt-a " "pod Windowsom (obratite pažnju da izvršavanje grafičkog programa \"scandisk" "\" nije dovoljno, trebate koristiti \"chkdsk\" u komandnom upitu!), " "opcionalno pokrenite \"defrag\", zatim ponovo pokrenite instalaciju. Također " "biste trebali spasiti sve podatke.\n" "\n" "\n" "Kada ste sigurni, kliknite na \"%s\"." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: fs/partitioning_wizard.pm:164 interactive.pm:542 interactive/curses.pm:263 #: ugtk2.pm:512 #, c-format msgid "Next" msgstr "Dalje" #: fs/partitioning_wizard.pm:167 #, fuzzy, c-format msgid "Partitionning" msgstr "Particioniranje" #: fs/partitioning_wizard.pm:167 #, c-format msgid "Which size do you want to keep for Microsoft Windows® on partition %s?" msgstr "" "Koju veličinu želite da sačuvate za Microsoft Windows® na particiji %s?" #: fs/partitioning_wizard.pm:168 #, c-format msgid "Size" msgstr "Veličina" #: fs/partitioning_wizard.pm:177 #, c-format msgid "Resizing Microsoft Windows® partition" msgstr "Smanjujem Microsoft Windows® particiju" #: fs/partitioning_wizard.pm:182 #, c-format msgid "FAT resizing failed: %s" msgstr "Smanjivanje FAT particije nije uspjelo: %s" #: fs/partitioning_wizard.pm:197 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo " "dovoljno prostora)" #: fs/partitioning_wizard.pm:202 #, c-format msgid "Remove Microsoft Windows®" msgstr "Ukloni Microsoft Windows®" #: fs/partitioning_wizard.pm:202 #, c-format msgid "Erase and use entire disk" msgstr "Pobriši čitav disk" #: fs/partitioning_wizard.pm:204 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "Imate više od jednog hard diska. Na koji od njih želite instalirati Linux?" #: fs/partitioning_wizard.pm:210 fsedit.pm:566 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s" #: fs/partitioning_wizard.pm:221 #, c-format msgid "Custom disk partitioning" msgstr "Ručno particioniranje diska" #: fs/partitioning_wizard.pm:227 #, c-format msgid "Use fdisk" msgstr "Koristi fdisk" #: fs/partitioning_wizard.pm:230 #, c-format msgid "" "You can now partition %s.\n" "When you are done, do not forget to save using `w'" msgstr "" "Sada možete particionirati %s.\n" "Kada završite, ne zaboravite spasiti naredbom 'w'" #: fs/partitioning_wizard.pm:270 #, c-format msgid "I can not find any room for installing" msgstr "Ne mogu naći dovoljno prostora za instalaciju" #: fs/partitioning_wizard.pm:274 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:" #: fs/partitioning_wizard.pm:282 #, c-format msgid "Partitioning failed: %s" msgstr "Particioniranje nije uspjelo: %s" #: fs/type.pm:368 #, c-format msgid "You can not use JFS for partitions smaller than 16MB" msgstr "Ne možete koristiti JFS za particije manje od 16MB" #: fs/type.pm:369 #, c-format msgid "You can not use ReiserFS for partitions smaller than 32MB" msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB" #: fsedit.pm:27 #, c-format msgid "with /usr" msgstr "sa /usr" #: fsedit.pm:32 #, c-format msgid "server" msgstr "server" #: fsedit.pm:116 #, c-format msgid "BIOS software RAID detected on disks %s. Activate it?" msgstr "BIOS softverski RAID je pronađen na diskovima %s. Da ga aktiviram?" #: fsedit.pm:224 #, c-format msgid "" "I can not read the partition table of device %s, it's too corrupted for me :" "(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Ne mogu pročitati tabelu particija na uređaju %s, previše je oštećena za " "mene :(\n" "Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n" "Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n" "(greška je %s)\n" "\n" "Slažete li se sa gubitkom svih particija?\n" #: fsedit.pm:393 #, c-format msgid "Mount points must begin with a leading /" msgstr "Tačke montiranja moraju počinjati sa /" #: fsedit.pm:394 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "Tačka montiranja se treba sastojati samo od brojeva i slova" #: fsedit.pm:395 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Već postoji particija sa tačkom montiranja %s\n" #: fsedit.pm:399 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Izabrali ste softversku RAID particiju kao root (/).\n" "Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n" "Molim kasnije dodajte /boot particiju" #: fsedit.pm:405 #, c-format msgid "" "You can not use the LVM Logical Volume for mount point %s since it spans " "physical volumes" msgstr "" "Ne možete koristiti LVM logički volumen za tačku montiranja %s pošto on " "obuhvata fizičke volumene" #: fsedit.pm:407 #, c-format msgid "" "You've selected the LVM Logical Volume as root (/).\n" "The bootloader is not able to handle this when the volume spans physical " "volumes.\n" "You should create a /boot partition first" msgstr "" "Izabrali ste LVM logički volumen kao root (/).\n" "Nijedan bootloader nije u mogućnosti da rukuje sa ovim ako se taj volumen " "prostire preko više fizičkih volumena.\n" "Trebali biste najprije napraviti /boot particiju" #: fsedit.pm:411 fsedit.pm:413 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema" #: fsedit.pm:415 fsedit.pm:417 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu " "tačku montiranja\n" #: fsedit.pm:419 #, c-format msgid "You can not use an encrypted file system for mount point %s" msgstr "Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s" #: fsedit.pm:483 #, c-format msgid "Not enough free space for auto-allocating" msgstr "Nema dovoljno prostora za auto-alokaciju" #: fsedit.pm:485 #, c-format msgid "Nothing to do" msgstr "Nemam šta da radim" #: harddrake/data.pm:64 #, c-format msgid "SATA controllers" msgstr "SATA kontroleri" #: harddrake/data.pm:73 #, c-format msgid "RAID controllers" msgstr "RAID kontroleri" #: harddrake/data.pm:83 #, c-format msgid "(E)IDE/ATA controllers" msgstr "(E)IDE/ATA kontroleri" #: harddrake/data.pm:93 #, fuzzy, c-format msgid "Card readers" msgstr "Model kartice:" #: harddrake/data.pm:102 #, c-format msgid "Firewire controllers" msgstr "Firewire kontroleri" #: harddrake/data.pm:111 #, c-format msgid "PCMCIA controllers" msgstr "PCMCIA kontroleri" #: harddrake/data.pm:120 #, c-format msgid "SCSI controllers" msgstr "SCSI kontroleri" #: harddrake/data.pm:129 #, c-format msgid "USB controllers" msgstr "USB kontroleri" #: harddrake/data.pm:138 #, c-format msgid "USB ports" msgstr "USB portovi" #: harddrake/data.pm:147 #, c-format msgid "SMBus controllers" msgstr "SMBus kontroleri" #: harddrake/data.pm:156 #, c-format msgid "Bridges and system controllers" msgstr "Mostovi (bridges) i sistemski kontroleri" #: harddrake/data.pm:168 #, c-format msgid "Floppy" msgstr "Disketa" #: harddrake/data.pm:178 #, c-format msgid "Zip" msgstr "Zip" #: harddrake/data.pm:194 #, c-format msgid "Hard Disk" msgstr "Hard Disk" #: harddrake/data.pm:204 #, c-format msgid "USB Mass Storage Devices" msgstr "USB uređaji za smještaj podataka" #: harddrake/data.pm:213 #, c-format msgid "CDROM" msgstr "CDROM" #: harddrake/data.pm:223 #, c-format msgid "CD/DVD burners" msgstr "CD/DVD pržilica" #: harddrake/data.pm:233 #, c-format msgid "DVD-ROM" msgstr "DVD-ROM" #: harddrake/data.pm:243 #, c-format msgid "Tape" msgstr "Traka" #: harddrake/data.pm:254 #, c-format msgid "AGP controllers" msgstr "AGP kontroleri" #: harddrake/data.pm:263 #, c-format msgid "Videocard" msgstr "Video kartica" #: harddrake/data.pm:272 #, c-format msgid "DVB card" msgstr "DVB kartica" #: harddrake/data.pm:280 #, c-format msgid "Tvcard" msgstr "TV kartica" #: harddrake/data.pm:289 #, c-format msgid "Other MultiMedia devices" msgstr "Drugi multimedijalni uređaj" #: harddrake/data.pm:298 #, c-format msgid "Soundcard" msgstr "Zvučna kartica" #: harddrake/data.pm:311 #, c-format msgid "Webcam" msgstr "Web kamera" #: harddrake/data.pm:325 #, c-format msgid "Processors" msgstr "Procesori" #: harddrake/data.pm:335 #, c-format msgid "ISDN adapters" msgstr "ISDN adapteri" #: harddrake/data.pm:346 #, c-format msgid "USB sound devices" msgstr "USB zvučni uređaji" #: harddrake/data.pm:355 #, c-format msgid "Radio cards" msgstr "Radio kartice" #: harddrake/data.pm:364 #, c-format msgid "ATM network cards" msgstr "ATM mrežne kartice" #: harddrake/data.pm:373 #, c-format msgid "WAN network cards" msgstr "WAN mrežne kartice" #: harddrake/data.pm:382 #, c-format msgid "Bluetooth devices" msgstr "Bluetooth uređaji" #: harddrake/data.pm:391 #, c-format msgid "Ethernetcard" msgstr "Ethernet kartica" #: harddrake/data.pm:408 #, c-format msgid "Modem" msgstr "Modem" #: harddrake/data.pm:418 #, c-format msgid "ADSL adapters" msgstr "ADSL adapteri" #: harddrake/data.pm:430 #, c-format msgid "Memory" msgstr "Memorija" #: harddrake/data.pm:439 #, c-format msgid "Printer" msgstr "Štampač" #. -PO: these are joysticks controllers: #: harddrake/data.pm:453 #, c-format msgid "Game port controllers" msgstr "Game port kontroleri" #: harddrake/data.pm:462 #, c-format msgid "Joystick" msgstr "Joystick" #: harddrake/data.pm:472 #, c-format msgid "Keyboard" msgstr "Tastatura" #: harddrake/data.pm:485 #, c-format msgid "Tablet and touchscreen" msgstr "Tablet i ekran osjetljiv na dodir" #: harddrake/data.pm:494 #, c-format msgid "Mouse" msgstr "Miš" #: harddrake/data.pm:508 #, c-format msgid "Biometry" msgstr "" #: harddrake/data.pm:516 #, c-format msgid "UPS" msgstr "UPS" #: harddrake/data.pm:525 #, c-format msgid "Scanner" msgstr "Skener" #: harddrake/data.pm:536 #, c-format msgid "Unknown/Others" msgstr "Nepoznat/Ostali" #: harddrake/data.pm:564 #, c-format msgid "cpu # " msgstr "cpu # " #: harddrake/sound.pm:202 #, c-format msgid "Please Wait... Applying the configuration" msgstr "Molim sačekajte... Primjenjujem konfiguraciju" #: harddrake/sound.pm:305 #, c-format msgid "Enable PulseAudio" msgstr "" #: harddrake/sound.pm:309 #, c-format msgid "Automatic routing from ALSA to PulseAudio" msgstr "" #: harddrake/sound.pm:313 #, c-format msgid "Enable user switching for audio applications" msgstr "" #: harddrake/sound.pm:318 #, c-format msgid "Reset sound mixer to default values" msgstr "" #: harddrake/sound.pm:323 #, c-format msgid "Trouble shooting" msgstr "Kako ukloniti problem?" #: harddrake/sound.pm:330 #, c-format msgid "No alternative driver" msgstr "Nema alternativnog drajvera" #: harddrake/sound.pm:240 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" "Nema nijedan poznat OSS/ALSA alternativni drajver za vašu zvučnu karticu (%" "s) koja trenutno koristi \"%s\"" #: harddrake/sound.pm:246 #, c-format msgid "Sound configuration" msgstr "Podešavanje zvuka" #: harddrake/sound.pm:248 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" "Ovdje možete izabrati alternativni drajver (ili OSS ili ALSA) za vašu zvučnu " "karticu (%s)." #. -PO: here the first %s is either "OSS" or "ALSA", #. -PO: the second %s is the name of the current driver #. -PO: and the third %s is the name of the default driver #: harddrake/sound.pm:253 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" "\n" "\n" "Vaša kartica trenutno koristi %s \"%s\" drajver (uobičajeni drajver za vašu " "karticu je \"%s\")" #: harddrake/sound.pm:255 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" "OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od " "operativnog sistema (dostupan je na većini UNIX(tm) sistema), ali je vrlo " "elementaran i ograničen.\n" "Pored toga, svi OSS drajveri ponovo izmišljaju točak.\n" "\n" "ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n" "podržava prilično velik broj ISA, USB i PCI kartica.\n" "\n" "Ona takođe pruža mnogo viši API nego OSS.\n" "\n" "Da biste koristili ALSA, možete koristiti:\n" "- stari API kompatibilan sa OSSom\n" "- novi ALSA API koji pruža mnoge napredne mogućnosti, ali zahtijeva upotrebu " "ALSA biblioteke.\n" #: harddrake/sound.pm:269 harddrake/sound.pm:354 #, c-format msgid "Driver:" msgstr "Drajver:" #: harddrake/sound.pm:379 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver will only be used on next bootstrap." msgstr "" "Stari \"%s\" drajver je na crnoj listi.\n" "\n" "Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n" "\n" "Stoga će novi drajver \"%s\" biti korišten tek nakon idućeg pokretanja " "sistema." #: harddrake/sound.pm:294 #, c-format msgid "No open source driver" msgstr "Nema open source drajver" #: harddrake/sound.pm:295 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" "Nema slobodnih drajvera za vašu zvučnu karticu (%s), ali postoji vlasnički " "drajver na \"%s\"." #: harddrake/sound.pm:298 #, c-format msgid "No known driver" msgstr "Nema nijedan poznat drajver" #: harddrake/sound.pm:299 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "Nema poznatih drajvera za vašu zvučnu karticu (%s)" #: harddrake/sound.pm:314 #, c-format msgid "Sound trouble shooting" msgstr "Rješavanje problema sa zvukom" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:317 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modprobe.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" "Klasični način utvrđivanja bugova u zvučnom sistemu je izvršavanje\n" "sljedećih naredbi:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver inače koristi\n" "vaša kartica\n" "\n" "- \"grep sound-slot /etc/modprobe.conf\" će vam reći koji drajver je\n" "trenutno u upotrebi\n" "\n" "- sa \"/sbin/lsmod\" možete provjeriti da li je modul (drajver) učitan\n" "ili ne\n" "\n" "- \"/sbin/chkconfig --list sound\" i \"/sbin/chkconfig --list alsa\" vam\n" "govore da li su servisi sound i alsa podešeni da se pokreću na\n" "initlevel 3\n" "\n" "- \"aumix -q\" će vam reći da li je zvuk utišan (muted) ili ne\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvučnu " "karticu.\n" #: harddrake/sound.pm:343 #, c-format msgid "Let me pick any driver" msgstr "Dozvoli da sam odaberem drajver" #: harddrake/sound.pm:346 #, c-format msgid "Choosing an arbitrary driver" msgstr "Slobodan izbor drajvera" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: harddrake/sound.pm:349 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" "Ako stvarno mislite da znate koji drajver je odgovarajući za vašu karticu\n" "možete odabrati jedan sa gornje liste.\n" "\n" "Trenutni drajver za vašu \"%s\" zvučnu karticu je \"%s\"" #: harddrake/v4l.pm:12 #, c-format msgid "Auto-detect" msgstr "Auto prepoznavanje" #: harddrake/v4l.pm:97 harddrake/v4l.pm:285 harddrake/v4l.pm:337 #, c-format msgid "Unknown|Generic" msgstr "Nepoznat|Opšti" #: harddrake/v4l.pm:130 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "Nepoznat|CPH05X (bt878) [razni proizvođači]" #: harddrake/v4l.pm:131 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "Nepoznat|CPH06X (bt878) [razni proizvođači]" #: harddrake/v4l.pm:475 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" "Za većinu modernih TV kartica, bttv modul Linux kernela automatski " "prepoznaje odgovarajuće parametre.\n" "Ako je vaša kartica pogrešno prepoznata, ovdje možete prisiliti odgovarajući " "tip tunera i kartice. Samo izaberite parametre vaše TV karte." #: harddrake/v4l.pm:478 #, c-format msgid "Card model:" msgstr "Model kartice:" #: harddrake/v4l.pm:479 #, c-format msgid "Tuner type:" msgstr "Vrsta tunera:" #: interactive.pm:125 interactive.pm:542 interactive/curses.pm:263 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39 #: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:414 ugtk2.pm:512 #: ugtk2.pm:801 ugtk2.pm:824 #, c-format msgid "Ok" msgstr "U redu" #: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:800 wizards.pm:156 #, c-format msgid "Yes" msgstr "Da" #: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:800 wizards.pm:156 #, c-format msgid "No" msgstr "Ne" #: interactive.pm:258 #, c-format msgid "Choose a file" msgstr "Izaberi datoteku" #: interactive.pm:383 interactive/gtk.pm:420 #, c-format msgid "Add" msgstr "Dodaj" #: interactive.pm:383 interactive/gtk.pm:420 #, c-format msgid "Modify" msgstr "Izmijeni" #: interactive.pm:383 interactive/gtk.pm:420 #, c-format msgid "Remove" msgstr "Pobriši" #: interactive.pm:542 interactive/curses.pm:263 ugtk2.pm:512 #, c-format msgid "Finish" msgstr "Kraj" #: interactive.pm:543 interactive/curses.pm:260 ugtk2.pm:510 #, c-format msgid "Previous" msgstr "Nazad" #: interactive/gtk.pm:548 #, c-format msgid "Beware, Caps Lock is enabled" msgstr "" #: interactive/stdio.pm:29 interactive/stdio.pm:154 #, c-format msgid "Bad choice, try again\n" msgstr "Pogrešan izbor, pokušajte ponovo\n" #: interactive/stdio.pm:30 interactive/stdio.pm:155 #, c-format msgid "Your choice? (default %s) " msgstr "Vaš izbor? (podrazumjevano %s)" #: interactive/stdio.pm:54 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" "Stavke koje morate popuniti:\n" "%s" #: interactive/stdio.pm:70 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Vaš izbor? (0/1, podrazumjevano %s)" #: interactive/stdio.pm:97 #, c-format msgid "Button `%s': %s" msgstr "Dugme '%s': %s" #: interactive/stdio.pm:98 #, c-format msgid "Do you want to click on this button?" msgstr "Da li želite kliknuti na ovo dugme?" #: interactive/stdio.pm:110 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "Vaš izbor? (podrazumjevano '%s' %s)" #: interactive/stdio.pm:110 #, c-format msgid " enter `void' for void entry" msgstr " unesite `void' za prazan unos" #: interactive/stdio.pm:128 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "=> Postoji mnogo stvari od kojih možete izabrati (%s).\n" #: interactive/stdio.pm:131 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" "Molim unesite prvi broj od deset koji želite izmjeniti,\n" "ili samo pritisnite Enter za nastavak.\n" "Vaš izbor?" #: interactive/stdio.pm:144 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" "=> Primjetite, natpis je promijenjen:\n" "%s" #: interactive/stdio.pm:151 #, c-format msgid "Re-submit" msgstr "Ponovo pošalji" #. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR" #. -PO: or as "default:RTL", depending if your language is written from #. -PO: left to right, or from right to left; any other string is wrong. #: lang.pm:193 #, c-format msgid "default:LTR" msgstr "default:LTR" #: lang.pm:210 #, c-format msgid "Andorra" msgstr "Andora" #: lang.pm:211 timezone.pm:215 #, c-format msgid "United Arab Emirates" msgstr "Ujedinjeni Arapski Emirati" #: lang.pm:212 #, c-format msgid "Afghanistan" msgstr "Afganistan" #: lang.pm:213 #, c-format msgid "Antigua and Barbuda" msgstr "Antigua i Barbuda" #: lang.pm:214 #, c-format msgid "Anguilla" msgstr "Anguilla" #: lang.pm:215 #, c-format msgid "Albania" msgstr "Albanija" #: lang.pm:216 #, c-format msgid "Armenia" msgstr "Armenija" #: lang.pm:217 #, c-format msgid "Netherlands Antilles" msgstr "Nizozemski Antili" #: lang.pm:218 #, c-format msgid "Angola" msgstr "Angola" #: lang.pm:219 #, c-format msgid "Antarctica" msgstr "Antarktik" #: lang.pm:220 timezone.pm:260 #, c-format msgid "Argentina" msgstr "Argentina" #: lang.pm:221 #, c-format msgid "American Samoa" msgstr "Američka Samoa" #: lang.pm:222 mirror.pm:11 timezone.pm:218 #, c-format msgid "Austria" msgstr "Austrija" #: lang.pm:223 mirror.pm:10 timezone.pm:256 #, c-format msgid "Australia" msgstr "Australija" #: lang.pm:224 #, c-format msgid "Aruba" msgstr "Aruba" #: lang.pm:225 #, c-format msgid "Azerbaijan" msgstr "Azerbejdžan" #: lang.pm:226 #, c-format msgid "Bosnia and Herzegovina" msgstr "Bosna i Hercegovina" #: lang.pm:227 #, c-format msgid "Barbados" msgstr "Barbados" #: lang.pm:228 timezone.pm:200 #, c-format msgid "Bangladesh" msgstr "Bangladeš" #: lang.pm:229 mirror.pm:12 timezone.pm:220 #, c-format msgid "Belgium" msgstr "Belgija" #: lang.pm:230 #, c-format msgid "Burkina Faso" msgstr "Burkina Faso" #: lang.pm:231 timezone.pm:221 #, c-format msgid "Bulgaria" msgstr "Bugarska" #: lang.pm:232 #, c-format msgid "Bahrain" msgstr "Bahrein" #: lang.pm:233 #, c-format msgid "Burundi" msgstr "Burundi" #: lang.pm:234 #, c-format msgid "Benin" msgstr "Benin" #: lang.pm:235 #, c-format msgid "Bermuda" msgstr "Bermuda" #: lang.pm:236 #, c-format msgid "Brunei Darussalam" msgstr "Bruneji" #: lang.pm:237 #, c-format msgid "Bolivia" msgstr "Bolivija" #: lang.pm:238 mirror.pm:13 timezone.pm:261 #, c-format msgid "Brazil" msgstr "Brazil" #: lang.pm:239 #, c-format msgid "Bahamas" msgstr "Bahami" #: lang.pm:240 #, c-format msgid "Bhutan" msgstr "Butan" #: lang.pm:241 #, c-format msgid "Bouvet Island" msgstr "Ostrvo Bouvet" #: lang.pm:242 #, c-format msgid "Botswana" msgstr "Bocvana" #: lang.pm:243 timezone.pm:219 #, c-format msgid "Belarus" msgstr "Bjelorusija" #: lang.pm:244 #, c-format msgid "Belize" msgstr "Belize" #: lang.pm:245 mirror.pm:14 timezone.pm:250 #, c-format msgid "Canada" msgstr "Kanada" #: lang.pm:246 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Kokosova ostrva" #: lang.pm:247 #, c-format msgid "Congo (Kinshasa)" msgstr "Kongo (Kinshasa)" #: lang.pm:248 #, c-format msgid "Central African Republic" msgstr "Centralnoafrička Republika" #: lang.pm:249 #, c-format msgid "Congo (Brazzaville)" msgstr "Kongo (Brazzaville)" #: lang.pm:250 mirror.pm:38 timezone.pm:244 #, c-format msgid "Switzerland" msgstr "Švicarska" #: lang.pm:251 #, c-format msgid "Cote d'Ivoire" msgstr "Obala Slonovače" #: lang.pm:252 #, c-format msgid "Cook Islands" msgstr "Cook ostrva" #: lang.pm:253 timezone.pm:262 #, c-format msgid "Chile" msgstr "Čile" #: lang.pm:254 #, c-format msgid "Cameroon" msgstr "Kamerun" #: lang.pm:255 timezone.pm:201 #, c-format msgid "China" msgstr "Kina" #: lang.pm:256 #, c-format msgid "Colombia" msgstr "Kolumbija" #: lang.pm:257 mirror.pm:15 #, c-format msgid "Costa Rica" msgstr "Kostarika" #: lang.pm:258 #, c-format msgid "Serbia & Montenegro" msgstr "Srbija i Crna Gora" #: lang.pm:259 #, c-format msgid "Cuba" msgstr "Kuba" #: lang.pm:260 #, c-format msgid "Cape Verde" msgstr "Zelenortska ostrva" #: lang.pm:261 #, c-format msgid "Christmas Island" msgstr "Uskršnje ostrvo" #: lang.pm:262 #, c-format msgid "Cyprus" msgstr "Kipar" #: lang.pm:263 mirror.pm:16 timezone.pm:222 #, c-format msgid "Czech Republic" msgstr "Češka" #: lang.pm:264 mirror.pm:21 timezone.pm:227 #, c-format msgid "Germany" msgstr "Njemačka" #: lang.pm:265 #, c-format msgid "Djibouti" msgstr "Džibuti" #: lang.pm:266 mirror.pm:17 timezone.pm:223 #, c-format msgid "Denmark" msgstr "Danska" #: lang.pm:267 #, c-format msgid "Dominica" msgstr "Dominika" #: lang.pm:268 #, c-format msgid "Dominican Republic" msgstr "Dominikanska Republika" #: lang.pm:269 #, c-format msgid "Algeria" msgstr "Alžir" #: lang.pm:270 #, c-format msgid "Ecuador" msgstr "Ekvador" #: lang.pm:271 mirror.pm:18 timezone.pm:224 #, c-format msgid "Estonia" msgstr "Estonija" #: lang.pm:272 #, c-format msgid "Egypt" msgstr "Egipat" #: lang.pm:273 #, c-format msgid "Western Sahara" msgstr "Zapadna Sahara" #: lang.pm:274 #, c-format msgid "Eritrea" msgstr "Eritreja" #: lang.pm:275 mirror.pm:36 timezone.pm:242 #, c-format msgid "Spain" msgstr "Španija" #: lang.pm:276 #, c-format msgid "Ethiopia" msgstr "Etiopija" #: lang.pm:277 mirror.pm:19 timezone.pm:225 #, c-format msgid "Finland" msgstr "Finska" #: lang.pm:278 #, c-format msgid "Fiji" msgstr "Fidži" #: lang.pm:279 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "Falklandsko otočje" #: lang.pm:280 #, c-format msgid "Micronesia" msgstr "Micronesia" #: lang.pm:281 #, c-format msgid "Faroe Islands" msgstr "Farska ostrva" #: lang.pm:282 mirror.pm:20 timezone.pm:226 #, c-format msgid "France" msgstr "Francuska" #: lang.pm:283 #, c-format msgid "Gabon" msgstr "Gabon" #: lang.pm:284 timezone.pm:246 #, c-format msgid "United Kingdom" msgstr "Ujedinjeno Kraljevstvo" #: lang.pm:285 #, c-format msgid "Grenada" msgstr "Grenada" #: lang.pm:286 #, c-format msgid "Georgia" msgstr "Gruzija" #: lang.pm:287 #, c-format msgid "French Guiana" msgstr "Francuska Gvajana" #: lang.pm:288 #, c-format msgid "Ghana" msgstr "Gana" #: lang.pm:289 #, c-format msgid "Gibraltar" msgstr "Gibraltar" #: lang.pm:290 #, c-format msgid "Greenland" msgstr "Grenland" #: lang.pm:291 #, c-format msgid "Gambia" msgstr "Gambija" #: lang.pm:292 #, c-format msgid "Guinea" msgstr "Gvineja" #: lang.pm:293 #, c-format msgid "Guadeloupe" msgstr "Gvadalupe" #: lang.pm:294 #, c-format msgid "Equatorial Guinea" msgstr "Ekvatorijalna Gvineja" #: lang.pm:295 mirror.pm:22 timezone.pm:228 #, c-format msgid "Greece" msgstr "Grčka" #: lang.pm:296 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "South Georgia i South Sandwich ostrva" #: lang.pm:297 timezone.pm:251 #, c-format msgid "Guatemala" msgstr "Gvatemala" #: lang.pm:298 #, c-format msgid "Guam" msgstr "Guam" #: lang.pm:299 #, c-format msgid "Guinea-Bissau" msgstr "Gvineja Bisau" #: lang.pm:300 #, c-format msgid "Guyana" msgstr "Gvajana" #: lang.pm:301 #, c-format msgid "Hong Kong SAR (China)" msgstr "Kina (Hong Kong)" #: lang.pm:302 #, c-format msgid "Heard and McDonald Islands" msgstr "Heard ostrvo i McDonaldova ostrva" #: lang.pm:303 #, c-format msgid "Honduras" msgstr "Honduras" #: lang.pm:304 #, c-format msgid "Croatia" msgstr "Hrvatska" #: lang.pm:305 #, c-format msgid "Haiti" msgstr "Haiti" #: lang.pm:306 mirror.pm:23 timezone.pm:229 #, c-format msgid "Hungary" msgstr "Mađarska" #: lang.pm:307 timezone.pm:204 #, c-format msgid "Indonesia" msgstr "Indonezija" #: lang.pm:308 mirror.pm:24 timezone.pm:230 #, c-format msgid "Ireland" msgstr "Irska" #: lang.pm:309 mirror.pm:25 timezone.pm:206 #, c-format msgid "Israel" msgstr "Izrael" #: lang.pm:310 timezone.pm:203 #, c-format msgid "India" msgstr "Indija" #: lang.pm:311 #, c-format msgid "British Indian Ocean Territory" msgstr "Britansko-Indijska morska teritorija" #: lang.pm:312 #, c-format msgid "Iraq" msgstr "Irak" #: lang.pm:313 timezone.pm:205 #, c-format msgid "Iran" msgstr "Iran" #: lang.pm:314 #, c-format msgid "Iceland" msgstr "Island" #: lang.pm:315 mirror.pm:26 timezone.pm:231 #, c-format msgid "Italy" msgstr "Italija" #: lang.pm:316 #, c-format msgid "Jamaica" msgstr "Jamajka" #: lang.pm:317 #, c-format msgid "Jordan" msgstr "Jordan" #: lang.pm:318 mirror.pm:27 timezone.pm:207 #, c-format msgid "Japan" msgstr "Japan" #: lang.pm:319 #, c-format msgid "Kenya" msgstr "Kenija" #: lang.pm:320 #, c-format msgid "Kyrgyzstan" msgstr "Kirgistan" #: lang.pm:321 #, c-format msgid "Cambodia" msgstr "Kambođa" #: lang.pm:322 #, c-format msgid "Kiribati" msgstr "Kiribati" #: lang.pm:323 #, c-format msgid "Comoros" msgstr "Komori" #: lang.pm:324 #, c-format msgid "Saint Kitts and Nevis" msgstr "Saint Kitts and Nevis" #: lang.pm:325 #, c-format msgid "Korea (North)" msgstr "Koreja (Sjeverna)" #: lang.pm:326 timezone.pm:208 #, c-format msgid "Korea" msgstr "Koreja" #: lang.pm:327 #, c-format msgid "Kuwait" msgstr "Kuvajt" #: lang.pm:328 #, c-format msgid "Cayman Islands" msgstr "Kajmanska ostrva" #: lang.pm:329 #, c-format msgid "Kazakhstan" msgstr "Kazahstan" #: lang.pm:330 #, c-format msgid "Laos" msgstr "Laos" #: lang.pm:331 #, c-format msgid "Lebanon" msgstr "Liban" #: lang.pm:332 #, c-format msgid "Saint Lucia" msgstr "Saint Lucia" #: lang.pm:333 #, c-format msgid "Liechtenstein" msgstr "Lihtenštajn" #: lang.pm:334 #, c-format msgid "Sri Lanka" msgstr "Šri Lanka" #: lang.pm:335 #, c-format msgid "Liberia" msgstr "Liberija" #: lang.pm:336 #, c-format msgid "Lesotho" msgstr "Lesoto" #: lang.pm:337 timezone.pm:232 #, c-format msgid "Lithuania" msgstr "Litvanija" #: lang.pm:338 timezone.pm:233 #, c-format msgid "Luxembourg" msgstr "Luksemburg" #: lang.pm:339 #, c-format msgid "Latvia" msgstr "Latvija" #: lang.pm:340 #, c-format msgid "Libya" msgstr "Libija" #: lang.pm:341 #, c-format msgid "Morocco" msgstr "Maroko" #: lang.pm:342 #, c-format msgid "Monaco" msgstr "Monako" #: lang.pm:343 #, c-format msgid "Moldova" msgstr "Moldova" #: lang.pm:344 #, c-format msgid "Madagascar" msgstr "Madagaskar" #: lang.pm:345 #, c-format msgid "Marshall Islands" msgstr "Maršalova ostrva" #: lang.pm:346 #, c-format msgid "Macedonia" msgstr "Makedonija" #: lang.pm:347 #, c-format msgid "Mali" msgstr "Mali" #: lang.pm:348 #, c-format msgid "Myanmar" msgstr "Myanmar" #: lang.pm:349 #, c-format msgid "Mongolia" msgstr "Mongolija" #: lang.pm:350 #, c-format msgid "Northern Mariana Islands" msgstr "Sjeverna Marijanska ostrva" #: lang.pm:351 #, c-format msgid "Martinique" msgstr "Martinik" #: lang.pm:352 #, c-format msgid "Mauritania" msgstr "Mauritanija" #: lang.pm:353 #, c-format msgid "Montserrat" msgstr "Montserrat" #: lang.pm:354 #, c-format msgid "Malta" msgstr "Malta" #: lang.pm:355 #, c-format msgid "Mauritius" msgstr "Mauricijus" #: lang.pm:356 #, c-format msgid "Maldives" msgstr "Maldivi" #: lang.pm:357 #, c-format msgid "Malawi" msgstr "Malavi" #: lang.pm:358 timezone.pm:252 #, c-format msgid "Mexico" msgstr "Meksiko" #: lang.pm:359 timezone.pm:209 #, c-format msgid "Malaysia" msgstr "Malezija" #: lang.pm:360 #, c-format msgid "Mozambique" msgstr "Mozambik" #: lang.pm:361 #, c-format msgid "Namibia" msgstr "Namibija" #: lang.pm:362 #, c-format msgid "New Caledonia" msgstr "Nova Kaledonija" #: lang.pm:363 #, c-format msgid "Niger" msgstr "Niger" #: lang.pm:364 #, c-format msgid "Norfolk Island" msgstr "Norfolk ostrvo" #: lang.pm:365 #, c-format msgid "Nigeria" msgstr "Nigerija" #: lang.pm:366 #, c-format msgid "Nicaragua" msgstr "Nikaragva" #: lang.pm:367 mirror.pm:28 timezone.pm:234 #, c-format msgid "Netherlands" msgstr "Nizozemska" #: lang.pm:368 mirror.pm:30 timezone.pm:235 #, c-format msgid "Norway" msgstr "Norveška" #: lang.pm:369 #, c-format msgid "Nepal" msgstr "Nepal" #: lang.pm:370 #, c-format msgid "Nauru" msgstr "Nauru" #: lang.pm:371 #, c-format msgid "Niue" msgstr "Niue" #: lang.pm:372 mirror.pm:29 timezone.pm:257 #, c-format msgid "New Zealand" msgstr "Novi Zeland" #: lang.pm:373 #, c-format msgid "Oman" msgstr "Oman" #: lang.pm:374 #, c-format msgid "Panama" msgstr "Panama" #: lang.pm:375 #, c-format msgid "Peru" msgstr "Peru" #: lang.pm:376 #, c-format msgid "French Polynesia" msgstr "Francuska Polinezija" #: lang.pm:377 #, c-format msgid "Papua New Guinea" msgstr "Papua Nova Gvineja" #: lang.pm:378 timezone.pm:210 #, c-format msgid "Philippines" msgstr "Filipini" #: lang.pm:379 #, c-format msgid "Pakistan" msgstr "Pakistan" #: lang.pm:380 mirror.pm:31 timezone.pm:236 #, c-format msgid "Poland" msgstr "Poljska" #: lang.pm:381 #, c-format msgid "Saint Pierre and Miquelon" msgstr "Saint Pierre and Miquelon" #: lang.pm:382 #, c-format msgid "Pitcairn" msgstr "Pitcairn" #: lang.pm:383 #, c-format msgid "Puerto Rico" msgstr "Portoriko" #: lang.pm:384 #, c-format msgid "Palestine" msgstr "Palestina" #: lang.pm:385 mirror.pm:32 timezone.pm:237 #, c-format msgid "Portugal" msgstr "Portugal" #: lang.pm:386 #, c-format msgid "Paraguay" msgstr "Paragvaj" #: lang.pm:387 #, c-format msgid "Palau" msgstr "Palau" #: lang.pm:388 #, c-format msgid "Qatar" msgstr "Katar" #: lang.pm:389 #, c-format msgid "Reunion" msgstr "Reunion" #: lang.pm:390 timezone.pm:238 #, c-format msgid "Romania" msgstr "Rumunija" #: lang.pm:391 mirror.pm:33 #, c-format msgid "Russia" msgstr "Rusija" #: lang.pm:392 #, c-format msgid "Rwanda" msgstr "Ruanda" #: lang.pm:393 #, c-format msgid "Saudi Arabia" msgstr "Saudijska Arabija" #: lang.pm:394 #, c-format msgid "Solomon Islands" msgstr "Solomonska ostrva" #: lang.pm:395 #, c-format msgid "Seychelles" msgstr "Sejšelska ostrva" #: lang.pm:396 #, c-format msgid "Sudan" msgstr "Sudan" #: lang.pm:397 mirror.pm:37 timezone.pm:243 #, c-format msgid "Sweden" msgstr "Švedska" #: lang.pm:398 timezone.pm:211 #, c-format msgid "Singapore" msgstr "Singapur" #: lang.pm:399 #, c-format msgid "Saint Helena" msgstr "Saint Helena" #: lang.pm:400 timezone.pm:241 #, c-format msgid "Slovenia" msgstr "Slovenija" #: lang.pm:401 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "Svalbard and Jan Mayen ostrva" #: lang.pm:402 mirror.pm:34 timezone.pm:240 #, c-format msgid "Slovakia" msgstr "Slovačka" #: lang.pm:403 #, c-format msgid "Sierra Leone" msgstr "Sierra Leone" #: lang.pm:404 #, c-format msgid "San Marino" msgstr "San Marino" #: lang.pm:405 #, c-format msgid "Senegal" msgstr "Senegal" #: lang.pm:406 #, c-format msgid "Somalia" msgstr "Somalija" #: lang.pm:407 #, c-format msgid "Suriname" msgstr "Surinam" #: lang.pm:408 #, c-format msgid "Sao Tome and Principe" msgstr "Sao Tome i Principe" #: lang.pm:409 #, c-format msgid "El Salvador" msgstr "El Salvador" #: lang.pm:410 #, c-format msgid "Syria" msgstr "Sirija" #: lang.pm:411 #, c-format msgid "Swaziland" msgstr "Svazilend" #: lang.pm:412 #, c-format msgid "Turks and Caicos Islands" msgstr "Turks i Caicos ostrva" #: lang.pm:413 #, c-format msgid "Chad" msgstr "Čad" #: lang.pm:414 #, c-format msgid "French Southern Territories" msgstr "Francuske Južne Teritorije" #: lang.pm:415 #, c-format msgid "Togo" msgstr "Togo" #: lang.pm:416 mirror.pm:40 timezone.pm:213 #, c-format msgid "Thailand" msgstr "Tajland" #: lang.pm:417 #, c-format msgid "Tajikistan" msgstr "Tadžikistan" #: lang.pm:418 #, c-format msgid "Tokelau" msgstr "Tokelau" #: lang.pm:419 #, c-format msgid "East Timor" msgstr "Istočni Timor" #: lang.pm:420 #, c-format msgid "Turkmenistan" msgstr "Turkmenistan" #: lang.pm:421 #, c-format msgid "Tunisia" msgstr "Tunis" #: lang.pm:422 #, c-format msgid "Tonga" msgstr "Tonga" #: lang.pm:423 timezone.pm:214 #, c-format msgid "Turkey" msgstr "Turska" #: lang.pm:424 #, c-format msgid "Trinidad and Tobago" msgstr "Trinidad i Tobago" #: lang.pm:425 #, c-format msgid "Tuvalu" msgstr "Tuvalu" #: lang.pm:426 mirror.pm:39 timezone.pm:212 #, c-format msgid "Taiwan" msgstr "Tajvan" #: lang.pm:427 timezone.pm:197 #, c-format msgid "Tanzania" msgstr "Tanzanija" #: lang.pm:428 timezone.pm:245 #, c-format msgid "Ukraine" msgstr "Ukrajina" #: lang.pm:429 #, c-format msgid "Uganda" msgstr "Uganda" #: lang.pm:430 #, c-format msgid "United States Minor Outlying Islands" msgstr "United States Minor Outlying Islands" #: lang.pm:431 mirror.pm:41 timezone.pm:253 #, c-format msgid "United States" msgstr "SAD" #: lang.pm:432 #, c-format msgid "Uruguay" msgstr "Urugvaj" #: lang.pm:433 #, c-format msgid "Uzbekistan" msgstr "Uzbekistan" #: lang.pm:434 #, c-format msgid "Vatican" msgstr "Vatikan" #: lang.pm:435 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "Saint Vincent and the Grenadines" #: lang.pm:436 #, c-format msgid "Venezuela" msgstr "Venecuela" #: lang.pm:437 #, c-format msgid "Virgin Islands (British)" msgstr "Djevičanska ostrva (Britanska)" #: lang.pm:438 #, c-format msgid "Virgin Islands (U.S.)" msgstr "Djevičanska ostrva (SAD)" #: lang.pm:439 #, c-format msgid "Vietnam" msgstr "Vijetnam" #: lang.pm:440 #, c-format msgid "Vanuatu" msgstr "Vanuatu" #: lang.pm:441 #, c-format msgid "Wallis and Futuna" msgstr "Wallis i Futuna" #: lang.pm:442 #, c-format msgid "Samoa" msgstr "Samoa" #: lang.pm:443 #, c-format msgid "Yemen" msgstr "Jemen" #: lang.pm:444 #, c-format msgid "Mayotte" msgstr "Mayotte" #: lang.pm:445 mirror.pm:35 timezone.pm:196 #, c-format msgid "South Africa" msgstr "Južna Afrika" #: lang.pm:446 #, c-format msgid "Zambia" msgstr "Zambija" #: lang.pm:447 #, c-format msgid "Zimbabwe" msgstr "Zimbabve" #: lang.pm:1193 #, c-format msgid "Welcome to %s" msgstr "Dobro došli u %s" #: lvm.pm:84 #, c-format msgid "Moving used physical extents to other physical volumes failed" msgstr "Premještanje fizičkih extents na druge fizičke volumene nije uspjela" #: lvm.pm:137 #, c-format msgid "Physical volume %s is still in use" msgstr "Fizički volumen %s se još uvijek koristi" #: lvm.pm:147 #, c-format msgid "Remove the logical volumes first\n" msgstr "Najprije ukloni logičke volumene\n" #: lvm.pm:180 #, c-format msgid "The bootloader can't handle /boot on multiple physical volumes" msgstr "Bootloader ne može rukovati /boot particijom na više fizičkih volumena" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:10 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" msgstr "" "Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n" "provjeru prevedenog teksta, tekst licence je ostavljen u originalnom\n" "(engleskom) obliku.\n" "\n" "\n" "Introduction\n" "\n" "The operating system and the different components available in the Mandriva " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandriva Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "Mandriva S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "Mandriva S.A. will, in no circumstances and to the extent permitted by law, " "be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if Mandriva S.A. has been advised of the possibility or " "occurrence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, Mandriva S.A. or its distributors will, in " "no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandriva Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to Mandriva.\n" "The programs developed by Mandriva S.A. are governed by the GPL License. " "Documentation written \n" "by Mandriva S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "Mandriva S.A. reserves its rights to modify or adapt the Software Products, " "as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of " "Mandriva S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact Mandriva S.A. \n" #: messages.pm:90 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" "Upozorenje: Slobodan softver ne mora obavezno biti slobodan od patenata\n" "i neki elementi slobodnog softvera mogu biti obuhvaćeni patentima u vašoj\n" "zemlji. Npr. MP3 dekoderi koji su uključeni možda zahtijevaju licencu za " "daljnje\n" "korištenje (za više detalja, pogledajte http://www.mp3licensing.com). Ako " "niste\n" "sigurni da li se patent odnosi na vas, provjerite vaše lokalne zakone." #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:98 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "Pažnja\n" "\n" "Molim pročitajte pažljivo uslove licence ispod. Ako se ne slažete sa bilo\n" "kojim dijelom, nije vam dozvoljeno da instalirate naredne CD medije. " "Pritisnite\n" "dugme 'Ne prihvatam' da biste nastavili sa instalacijom bez korištenja ovih " "medija.\n" "Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n" "provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n" "obliku.\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX #: messages.pm:131 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press Enter to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandriva " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandriva Linux User's Guide." msgstr "" "Čestitamo, instalacija je završena.\n" "Uklonite boot medij i pritisnite Enter da restartujete računar.\n" "\n" "\n" "Za informacije o ispravkama koje su dostupne za ovu verziju Mandriva " "Linuxa,\n" "pogledajte Errata koja je dostupna na:\n" "\n" "\n" "%s\n" "\n" "\n" "Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n" "\"Nakon instalacije\" vašeg zvaničnog Mandriva Linux Priručnika za upotrebu." #: modules/interactive.pm:19 #, c-format msgid "This driver has no configuration parameter!" msgstr "Ovaj drajver nema podesivih parametara!" #: modules/interactive.pm:22 #, c-format msgid "Module configuration" msgstr "Podešavanje modula" #: modules/interactive.pm:22 #, c-format msgid "You can configure each parameter of the module here." msgstr "Ovdje možete podesiti svaki parametar modula." #: modules/interactive.pm:63 #, c-format msgid "Found %s interfaces" msgstr "Pronađeno %s interfejsa" #: modules/interactive.pm:64 #, c-format msgid "Do you have another one?" msgstr "Imate li neki drugi?" #: modules/interactive.pm:65 #, c-format msgid "Do you have any %s interfaces?" msgstr "Imate li ijedan %s interfejs?" #: modules/interactive.pm:71 #, c-format msgid "See hardware info" msgstr "Pogledaj hardware info" #: modules/interactive.pm:82 #, c-format msgid "Installing driver for USB controller" msgstr "Instaliram drajver za USB kontroler" #: modules/interactive.pm:83 #, c-format msgid "Installing driver for firewire controller %s" msgstr "Instaliram drajver za firewire kontroler %s" #: modules/interactive.pm:84 #, c-format msgid "Installing driver for hard drive controller %s" msgstr "Instaliram drajver za hard disk kontroler %s" #: modules/interactive.pm:85 #, c-format msgid "Installing driver for ethernet controller %s" msgstr "Instaliram drajver za Ethernet kontroler %s" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: modules/interactive.pm:96 #, c-format msgid "Installing driver for %s card %s" msgstr "Instaliram drajver za %s karticu %s" #: modules/interactive.pm:110 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" "Sada možete navesti opcije za modul %s.\n" "Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'" #: modules/interactive.pm:116 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost " "ime2=vrijednost2 ...''.\n" "Na primjer, ``io=0x300 irq=7''" #: modules/interactive.pm:118 #, c-format msgid "Module options:" msgstr "Opcije modula" #. -PO: the %s is the driver type (scsi, network, sound,...) #: modules/interactive.pm:131 #, c-format msgid "Which %s driver should I try?" msgstr "Koji %s drajver ću pokušati?" #: modules/interactive.pm:140 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "U nekim slučajevima, %s drajver treba imati dodatne informacije za\n" "ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n" "ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve\n" "informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n" "ali ne bi trebalo izazvati nikakvu štetu." #: modules/interactive.pm:144 #, c-format msgid "Autoprobe" msgstr "Ispitivanje" #: modules/interactive.pm:144 #, c-format msgid "Specify options" msgstr "Navedi opcije" #: modules/interactive.pm:156 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Učitavanje modula %s nije uspjelo.\n" "Želite li probati opet sa drugim parametrima?" #: partition_table.pm:401 #, c-format msgid "mount failed: " msgstr "montiranje nije uspjelo: " #: partition_table.pm:510 #, c-format msgid "Extended partition not supported on this platform" msgstr "Extended particije nisu podržane na ovoj platformi" #: partition_table.pm:528 #, c-format msgid "" "You have a hole in your partition table but I can not use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Imate rupu u vašoj tabeli particija, ali je ja ne mogu upotrijebiti.\n" "Jedino rješenje je da pomjerite vaše primarne particije, kako bi se rupa " "našla pored extended particija" #: partition_table/raw.pm:279 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" "Nešto loše se dešava na vašem disku. \n" "Test integriteta podataka nije uspio. \n" "To znači će da pisanje bilo čega na disk rezultirati smećem." #: raid.pm:42 #, c-format msgid "Can not add a partition to _formatted_ RAID %s" msgstr "Ne mogu dodati particiju na _formatiran_ RAID %s" #: raid.pm:157 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Nema dovoljno particija za RAID nivo %d\n" #: scanner.pm:95 #, c-format msgid "Could not create directory /usr/share/sane/firmware!" msgstr "Ne mogu napraviti direktorij /usr/share/sane/firmware!" #: scanner.pm:106 #, c-format msgid "Could not create link /usr/share/sane/%s!" msgstr "Ne mogu napraviti link /usr/share/sane/%s!" #: scanner.pm:113 #, c-format msgid "Could not copy firmware file %s to /usr/share/sane/firmware!" msgstr "Ne mogu kopirati firmware datoteku %s u /usr/share/sane/firmware!" #: scanner.pm:120 #, c-format msgid "Could not set permissions of firmware file %s!" msgstr "Ne mogu postaviti privilegije firmware datoteke %s!" #: scanner.pm:199 #, c-format msgid "Scannerdrake" msgstr "Scannerdrake" #: scanner.pm:200 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "Ne mogu instalirati pakete koji su potrebni za dijeljenje skenera." #: scanner.pm:201 #, c-format msgid "Your scanner(s) will not be available for non-root users." msgstr "Vaši skeneri neće biti dostupni neprivilegovanim korisnicima." #: security/help.pm:11 #, fuzzy, c-format msgid "Accept bogus IPv4 error messages." msgstr "Prihvati neispravne IPv4 poruke o grešci" #: security/help.pm:13 #, fuzzy, c-format msgid "Accept broadcasted icmp echo." msgstr "Prihvati broadcast ICMP eho" #: security/help.pm:15 #, fuzzy, c-format msgid "Accept icmp echo." msgstr "Prihvati ICMP eho" #: security/help.pm:17 #, fuzzy, c-format msgid "Allow autologin." msgstr "Dozvoli/zabrani autologin." #. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is #: security/help.pm:21 #, fuzzy, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to \"None\", no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" "Ako je postavljeno \"SVE\", dozvoljeno je postojanje /etc/issue i /etc/issue." "net.\n" "\n" "Ako je postavljeno na NIŠTA, datoteke nisu dozvoljene.\n" "\n" "Inače, dozvoljen je samo /etc/issue." #: security/help.pm:27 #, fuzzy, c-format msgid "Allow reboot by the console user." msgstr "Dozvoli/zabrani restartovanje računara iz konzole." #: security/help.pm:29 #, fuzzy, c-format msgid "Allow remote root login." msgstr "Dozvoli prijavu kao root putem mreže" #: security/help.pm:31 #, fuzzy, c-format msgid "Allow direct root login." msgstr "Dozvoli/zabrani direktan root login." #: security/help.pm:33 #, fuzzy, c-format msgid "" "Allow the list of users on the system on display managers (kdm and gdm)." msgstr "" "Dozvoli/zabrani listu korisnika sistema na display manager-ima (kdm i gdm)." #: security/help.pm:35 #, fuzzy, c-format msgid "" "Allow to export display when\n" "passing from the root account to the other users.\n" "\n" "See pam_xauth(8) for more details.'" msgstr "" "Dozvoli/zabrani izvoz ekrana kada\n" "proslijeđujete sa root računa drugim korisnicima.\n" "\n" "Pogledajte pam_xauth(8) za više detalja.'" #: security/help.pm:40 #, fuzzy, c-format msgid "" "Allow X connections:\n" "\n" "- \"All\" (all connections are allowed),\n" "\n" "- \"Local\" (only connection from local machine),\n" "\n" "- \"None\" (no connection)." msgstr "" "Dozvoli/zabrani X konekcije:\n" "\n" "- SVE (sve konekcije su dozvoljene),\n" "\n" "- LOKAL (samo konekcije sa lokalne mašine),\n" "\n" "- NIŠTA (nisu dozvoljene konekcije)." #: security/help.pm:48 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" "Ovaj argument određuje da li su klijenti autorizovani za\n" "povezivanje na X server putem mreže na TCP portu 6000." #. -PO: here "ALL", "Local" and "None" are values in a pull-down menu; translate them the same as they're #: security/help.pm:53 #, fuzzy, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"Local\"\n" "\n" "- none if set to \"None\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" "Autorizuj:\n" "\n" "- sve servise koje kontrolišu tcp_wrapperi (vidi hosts.deny(5) man " "stranicu), ako je podešeno na \"SVE\",\n" "\n" "- samo lokalne servise, ako je podešeno na \"LOKAL\",\n" "\n" "- nijedan, ako je podešeno na \"NIŠTA\".\n" "\n" "Da biste autorizovali servise koji su vam potrebni, koristite /etc/hosts." "allow (vidi hosts.allow(5))." #: security/help.pm:63 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" "Ako je SERVER_LEVEL (ili, ako ovaj ne postoji, SECURE_LEVEL)\n" "veći od 3 u /etc/security/msec/security.conf, pravi simbolički link\n" "/etc/security/msec/server koji pokazuje na /etc/security/msec/server." ".\n" "/etc/security/msec/server koristi chkconfig --add da odluči da li\n" "da doda servis ako je prisutan u datoteci tokom instalacije paketa." #: security/help.pm:72 #, fuzzy, c-format msgid "" "Enable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" "Uključi/isključi crontab i at za korisnike.\n" "\n" "Stavi korisnicima kojima je to dozvoljeno u /etc/cron.allow i /etc/at.allow " "(vidi man stranice at(1) i crontab(1))." #: security/help.pm:77 #, fuzzy, c-format msgid "Enable syslog reports to console 12" msgstr "Uključi/isključi syslog izvještaje na konzoli 12" #: security/help.pm:79 #, fuzzy, c-format msgid "" "Enable name resolution spoofing protection. If\n" "\"%s\" is true, also reports to syslog." msgstr "" "Uključi/isključi zaštitu od lažiranja rezolviranja imena. Ako\n" "je aktivna opcija \"%s\", takođe prijavljuje u syslog." #: security/help.pm:80 #, c-format msgid "Security Alerts:" msgstr "Sigurnosna upozorenja:" #: security/help.pm:82 #, fuzzy, c-format msgid "Enable IP spoofing protection." msgstr "Uključi zaštitu od lažiranja IP adrese" #: security/help.pm:84 #, fuzzy, c-format msgid "Enable libsafe if libsafe is found on the system." msgstr "Uključi libsafe ako libsafe postoji na vašem sistemu" #: security/help.pm:86 #, fuzzy, c-format msgid "Enable the logging of IPv4 strange packets." msgstr "Uključi logovanje čudnih IPv4 paketa" #: security/help.pm:88 #, fuzzy, c-format msgid "Enable msec hourly security check." msgstr "Uključi msec provjeru svakog sata" #: security/help.pm:90 #, c-format msgid "" "Enable su only from members of the wheel group. If set to no, allows su from " "any user." msgstr "" "Omogući su samo članovima wheel grupe. Ako je opcija isključena, su je " "dozvoljen svim korisnicima." #: security/help.pm:92 #, c-format msgid "Use password to authenticate users." msgstr "Koristi šifru za provjeru autentičnosti korisnika." #: security/help.pm:94 #, fuzzy, c-format msgid "Activate ethernet cards promiscuity check." msgstr "Aktiviraj/isključi provjeru promiskuitetnog moda Ethernet kartica." #: security/help.pm:96 #, fuzzy, c-format msgid "Activate daily security check." msgstr "Aktiviraj/isključi dnevnu sigurnosnu provjeru." #: security/help.pm:98 #, fuzzy, c-format msgid "Enable sulogin(8) in single user level." msgstr "Uključi/isključi sulogin(8) na jednokorisničkom nivou." #: security/help.pm:100 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "Dodaj ime kao izuzetak od upravljanja starenjem šifara putem msec-a." #: security/help.pm:102 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" "Podesi starenje šifre na \"max\" dana, a pauzu izmjene na \"inactive\"." #: security/help.pm:104 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" "Podesi dužinu historije šifara kojom se sprječava ponovno korištenje šifara." #: security/help.pm:106 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" "Podesite minimalnu dužinu šifre, minimalan broj cifara i minimalan broj " "velikih slova." #: security/help.pm:108 #, fuzzy, c-format msgid "Set the root's file mode creation mask." msgstr "Postavlja root-ov umask." #: security/help.pm:109 #, c-format msgid "if set to yes, check open ports." msgstr "ako je postavljeno na da, provjerava otvorene portove." #: security/help.pm:110 #, c-format msgid "" "if set to yes, check for:\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" "ako je postavljeno na da, provjerava:\n" "\n" "- prazne šifre,\n" "\n" "- nedostatak šifre u /etc/shadow\n" "\n" "- korisnike sa id-om 0 koji nisu root." #: security/help.pm:117 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" "ako je postavljeno na da, provjerava privilegije datoteka u korisničkom home-" "u." #: security/help.pm:118 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" "ako je postavljeno na da, provjerava da li su mrežni uređaji u " "promiskuitetnom modu." #: security/help.pm:119 #, c-format msgid "if set to yes, run the daily security checks." msgstr "ako je postavljeno na da, izvršava dnevne sigurnosne provjere." #: security/help.pm:120 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka." #: security/help.pm:121 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "ako je postavljeno na da, provjerava prazne šifre u /etc/shadow." #: security/help.pm:122 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka." #: security/help.pm:123 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" "ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka." #: security/help.pm:124 #, c-format msgid "if set to yes, report unowned files." msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika." #: security/help.pm:125 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" "ako je postavljeno na da, provjerava datoteke/direktorije koje svako može " "pisati." #: security/help.pm:126 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "ako je postavljeno na da, izvršava chkrootkit provjere." #: security/help.pm:127 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" "ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje " "root-u." #: security/help.pm:128 #, c-format msgid "if set to yes, report check result by mail." msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom." #: security/help.pm:129 #, c-format msgid "Do not send mails if there's nothing to warn about" msgstr "Ne šalji mailove ako nema razloga za upozorenja" #: security/help.pm:130 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "ako je postavljeno na da, izvršava neke provjere rpm baze podataka." #: security/help.pm:131 #, c-format msgid "if set to yes, report check result to syslog." msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog." #: security/help.pm:132 #, c-format msgid "if set to yes, reports check result to tty." msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty." #: security/help.pm:134 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" "Podesi veličinu historije naredbi shella. Vrijednost -1 znači neograničeno." #: security/help.pm:136 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" "Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena." #: security/help.pm:136 #, c-format msgid "Timeout unit is second" msgstr "Jedinica za vrijeme je sekunda" #: security/help.pm:138 #, fuzzy, c-format msgid "Set the user's file mode creation mask." msgstr "Podešava korisnički umask." #: security/l10n.pm:11 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "Prihvati neispravne IPv4 poruke o grešci" #: security/l10n.pm:12 #, c-format msgid "Accept broadcasted icmp echo" msgstr "Prihvati broadcast ICMP eho" #: security/l10n.pm:13 #, c-format msgid "Accept icmp echo" msgstr "Prihvati ICMP eho" #: security/l10n.pm:15 #, c-format msgid "/etc/issue* exist" msgstr "/etc/issue* postoji" #: security/l10n.pm:16 #, c-format msgid "Reboot by the console user" msgstr "Restartovanje za korisnika na konzoli" #: security/l10n.pm:17 #, c-format msgid "Allow remote root login" msgstr "Dozvoli prijavu kao root putem mreže" #: security/l10n.pm:18 #, c-format msgid "Direct root login" msgstr "Direktna root prijava" #: security/l10n.pm:19 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "Izlistaj korisnike na display manager-ima (kdm i gdm)" #: security/l10n.pm:20 #, c-format msgid "Export display when passing from root to the other users" msgstr "Izvoz ekrana kada prosljeđujete sa roota na druge korisnike" #: security/l10n.pm:21 #, c-format msgid "Allow X Window connections" msgstr "Dozvoli X Window konekcije" #: security/l10n.pm:22 #, c-format msgid "Authorize TCP connections to X Window" msgstr "Autorizuj TCP konekcije na X Window" #: security/l10n.pm:23 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "Autorizuj sve servise koje kontrolišu tcp_wrapperi" #: security/l10n.pm:24 #, c-format msgid "Chkconfig obey msec rules" msgstr "Chkconfig poštuje msec pravila" #: security/l10n.pm:25 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "Omogući korisnicima da koriste \"crontab\" i \"at\"" #: security/l10n.pm:26 #, c-format msgid "Syslog reports to console 12" msgstr "Syslog izvještaji na konzoli 12" #: security/l10n.pm:27 #, c-format msgid "Name resolution spoofing protection" msgstr "Zaštita od lažiranja rezolucije imena" #: security/l10n.pm:28 #, c-format msgid "Enable IP spoofing protection" msgstr "Uključi zaštitu od lažiranja IP adrese" #: security/l10n.pm:29 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "Uključi libsafe ako libsafe postoji na vašem sistemu" #: security/l10n.pm:30 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "Uključi logovanje čudnih IPv4 paketa" #: security/l10n.pm:31 #, c-format msgid "Enable msec hourly security check" msgstr "Uključi msec provjeru svakog sata" #: security/l10n.pm:32 #, c-format msgid "Enable su only from the wheel group members" msgstr "Omogući su samo za članove wheel grupe" #: security/l10n.pm:33 #, c-format msgid "Use password to authenticate users" msgstr "Koristi šifru da provjeriš autentičnost korisnika" #: security/l10n.pm:34 #, c-format msgid "Ethernet cards promiscuity check" msgstr "Provjera promiskuitetnog režima Ethernet kartica" #: security/l10n.pm:35 #, c-format msgid "Daily security check" msgstr "Dnevna sigurnosna provjera" #: security/l10n.pm:36 #, c-format msgid "Sulogin(8) in single user level" msgstr "Sulogin(8) na jednokorisničkom nivou" #: security/l10n.pm:37 #, c-format msgid "No password aging for" msgstr "Bez starenja šifre za" #: security/l10n.pm:38 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "Izaberite istek šifre i pauze prije deaktivacije računa" #: security/l10n.pm:39 #, c-format msgid "Password history length" msgstr "Dužina historije šifara" #: security/l10n.pm:40 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "Minimalna dužina šifre i broj cifara i velikih slova" #: security/l10n.pm:41 #, c-format msgid "Root umask" msgstr "Root umask" #: security/l10n.pm:42 #, c-format msgid "Shell history size" msgstr "Veličina historije shell-a" #: security/l10n.pm:43 #, c-format msgid "Shell timeout" msgstr "Istek vremena shella" #: security/l10n.pm:44 #, c-format msgid "User umask" msgstr "Korisnički umask" #: security/l10n.pm:45 #, c-format msgid "Check open ports" msgstr "Provjeri otvorene portove" #: security/l10n.pm:46 #, c-format msgid "Check for unsecured accounts" msgstr "Provjeri neupotrijebljene račune" #: security/l10n.pm:47 #, c-format msgid "Check permissions of files in the users' home" msgstr "Provjeri privilegije datoteka u korisničkom home-u." #: security/l10n.pm:48 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "Provjeri da li su mrežni uređaji u promiskuitetnom modu" #: security/l10n.pm:49 #, c-format msgid "Run the daily security checks" msgstr "Izvršavaj dnevne sigurnosne provjere" #: security/l10n.pm:50 #, c-format msgid "Check additions/removals of sgid files" msgstr "Provjeri dodavanje/brisanje sgid datoteka" #: security/l10n.pm:51 #, c-format msgid "Check empty password in /etc/shadow" msgstr "Provjeri prazne šifre u /etc/shadow" #: security/l10n.pm:52 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "Provjeri checksum suid/sgid datoteka" #: security/l10n.pm:53 #, c-format msgid "Check additions/removals of suid root files" msgstr "Provjeri dodavanje/brisanje suid root datoteka" #: security/l10n.pm:54 #, c-format msgid "Report unowned files" msgstr "Prijavi datoteke bez vlasnika" #: security/l10n.pm:55 #, c-format msgid "Check files/directories writable by everybody" msgstr "Provjeri datoteke/direktorije koje svako može pisati" #: security/l10n.pm:56 #, c-format msgid "Run chkrootkit checks" msgstr "Izvrši chkrootkit provjere" #: security/l10n.pm:57 #, c-format msgid "Do not send empty mail reports" msgstr "Ne šalji prazne e-mail izvještaje" #: security/l10n.pm:58 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" "Ako je uključeno, šalje e-mail izvještaj na ovu email adresu, inače ga šalje " "root-u" #: security/l10n.pm:59 #, c-format msgid "Report check result by mail" msgstr "Prijavi rezultate provjere mailom" #: security/l10n.pm:60 #, c-format msgid "Run some checks against the rpm database" msgstr "Izvrši neke provjere rpm baze podataka" #: security/l10n.pm:61 #, c-format msgid "Report check result to syslog" msgstr "Prijavi rezultate provjere u syslog" #: security/l10n.pm:62 #, c-format msgid "Reports check result to tty" msgstr "Prijavi rezultate provjere na tty" #: security/level.pm:10 #, c-format msgid "Welcome To Crackers" msgstr "Dobrodošli u Crackers" #: security/level.pm:11 #, c-format msgid "Poor" msgstr "Loš" #: security/level.pm:12 #, c-format msgid "Standard" msgstr "Standard" #: security/level.pm:13 #, c-format msgid "High" msgstr "Visok" #: security/level.pm:14 #, c-format msgid "Higher" msgstr "Viši" #: security/level.pm:15 #, c-format msgid "Paranoid" msgstr "Paranoičan" #: security/level.pm:41 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,\n" "ali vrlo osjetljivim: ne smije biti korišten za računar koji je spojen na\n" "druge ili na Internet. Nema pristupa šifrom." #: security/level.pm:44 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Šifra je sada aktivirana, ali korištenje za mrežni računar još nije " "preporučeno." #: security/level.pm:45 #, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Ovo je standardna sigurnost koja je preporučena za računar koji će biti " "korišten za spajanje na Internet kao klijent." #: security/level.pm:46 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" "Već postoje određena ograničenja, a više automatskih provjera se pokreće " "svaku noć." #: security/level.pm:47 #, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao " "server.\n" "Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji " "prima\n" "konekcije sa mnogo klijenata. Napomena: ako je vaš računar samo klijent na " "Internetu, možda je bolje da izaberete niži nivo." #: security/level.pm:50 #, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n" "Sigurnosne osobine na maksimumu." #: security/level.pm:55 #, c-format msgid "Security" msgstr "Sigurnost" #: security/level.pm:55 #, c-format msgid "DrakSec Basic Options" msgstr "DrakSec osnovne opcije" #: security/level.pm:57 #, c-format msgid "Please choose the desired security level" msgstr "Molim izaberite nivo sigurnosti" #: security/level.pm:61 #, c-format msgid "Security level" msgstr "Nivo sigurnosti" #: security/level.pm:63 #, c-format msgid "Use libsafe for servers" msgstr "Koristi libsafe za servere" #: security/level.pm:64 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" "Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"." #: security/level.pm:65 #, c-format msgid "Security Administrator (login or email)" msgstr "Sigurnosni administrator (login ili email)" #: services.pm:19 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "Pokreće ALSA zvučni sistem (Advanced Linux Sound Architecture)" #: services.pm:20 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron je periodični izvršitelj programa." #: services.pm:21 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "Apmd se koristi za nadgledanje statusa baterija i njegovo bilježenje preko\n" "sysloga. Takođe se može koristiti za gašenje računara kada su baterije pri " "kraju." #: services.pm:23 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Izvršava naredbe zakazane putem at komande u zadato vrijeme,\n" "te pokreće programe u pozadini kada je računar neopterećen." #: services.pm:25 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "Cron je standardan UNIX program koji periodično pokreće programe koje\n" "zada korisnik. Vixie cron dodaje veći broj mogućnosti osnovnom\n" "UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje." #: services.pm:28 #, c-format msgid "" "Common UNIX Printing System (CUPS) is an advanced printer spooling system" msgstr "" #: services.pm:29 #, c-format msgid "Launches the graphical display manager" msgstr "" #: services.pm:30 #, c-format msgid "" "FAM is a file monitoring daemon. It is used to get reports when files " "change.\n" "It is used by GNOME and KDE" msgstr "" "FAM je demon koji nadzire datoteke. Pomoću njega programi znaju ako se neka " "datoteka promijeni.\n" "FAM koriste GNOME i KDE grafičke okoline." #: services.pm:32 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM dodaje podršku za miša tekstualnim programima kao što je\n" "Midnight Commander. On također omogućuje konzolne isjeci/umetni operacije\n" "pomoću miša i uključuje podršku za pop-up menije na konzoli." #: services.pm:35 #, c-format msgid "HAL is a daemon that collects and maintains information about hardware" msgstr "" #: services.pm:36 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" "HardDrake ispituje hardware i eventualno podešava novi ili\n" "izmjenjeni hardware." #: services.pm:38 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache je World Wide Web server. Koristi se za posluživanje HTML\n" "datoteka i CGI skripti." #: services.pm:39 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Internet superserver (obično nazvan inetd) pokreće razne druge Internet\n" "servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao što su\n" "telnet, ftp, rsh i rlogin. Isključivanje inetd-a isključuje sve servise za " "koje je\n" "on nadležan." #: services.pm:43 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" "Pokreće filtriranje paketa za Linux kernele serije 2.2 kako\n" "bi se aktivirao firewall i zaštitio vaš računar od mrežnih napada." #: services.pm:45 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Ovaj paket učitava izabranu mapu tastature kao što je podešeno u\n" "/etc/sysconfig/keyboard, što se može podesiti korištenjem kbdconfig\n" "programa. Ovaj servis biste trebali ostaviti uključenim na većini računara." #: services.pm:48 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" "Automatsko regenerisanje kernel zaglavlja u /boot za\n" "/usr/include/linux/{autoconf,version}.h" #: services.pm:50 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota." #: services.pm:51 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" "Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n" "kako bi se održala sistemska konfiguracija." #: services.pm:53 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd je demon za štampu koji je potreban da bi lpr sistem štampe radio " "ispravno.\n" "To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima." #: services.pm:55 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" "Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n" "i dostupnosti (clusteri servera)." #: services.pm:57 #, c-format msgid "" "DBUS is a daemon which broadcasts notifications of system events and other " "messages" msgstr "" #: services.pm:58 #, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) je Domain Name Server (DNS) koji se koristi za određivanje IP " "adrese iz imena računara." #: services.pm:59 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Montira i demontira sve Network File System (NFS), SMB (Lan\n" "Manager/Windows) i NCP (NetWare) tačke montiranja." #: services.pm:61 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n" "za pokretanje tokom boota." #: services.pm:63 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n" "Ovaj servis omogućuje funkcionalnost NFS servera, kojeg podešavate\n" "putem /etc/exports datoteke." #: services.pm:66 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n" "Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka." #: services.pm:68 #, c-format msgid "Synchronizes system time using the Network Time Protocol (NTP)" msgstr "" #: services.pm:69 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and Xorg at boot." msgstr "" "Automatski uključuje numlock pod konzolom i grafičkim okruženjem\n" "prilikom boota." #: services.pm:71 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "Podrška za OKI 4w i kompatibilne 'winprinter' štampače." #: services.pm:72 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It will not get started unless configured so it is safe " "to have\n" "it installed on machines that do not need it." msgstr "" "PCMCIA podrška služi za ispravan rad uređaja kao što su mrežne\n" "kartice i modemi, priključenih na PCMCIA port (obično na laptopima).\n" "Neće se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n" "sigurno imati ga instaliranog i na računarima kojima nije potreban." #: services.pm:75 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper upravlja RPC konekcijama, koje koriste protokoli kao što\n" "su NFS i NIS. Portmap server mora raditi na računarima koje služe kao\n" "serveri za protokole koji koriste RPC mehanizam." #: services.pm:78 #, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix je Mail Transport Agent, tj. program koji šalje poštu sa jednog " "računara na drugi." #: services.pm:79 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Snima i učitava sistemski spremnik entropije za veću kvalitetu\n" "generisanja slučajnih brojeva." #: services.pm:81 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" "Dodjeljuje raw uređaje blokovskim uređajima (kao što su\n" "particije hard diska), za potrebu programa kao što je Oracle ili DVD playeri" #: services.pm:83 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n" "preko RIP protokola. Mada se RIP često koristi na malim mrežama, " "kompleksniji\n" "protokoli rutiranja su potrebni za složene mreže." #: services.pm:86 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Rstat protokol omogućava korisnicima na mreži da dobave\n" "mjeru performansi za svaki računar na toj mreži" #: services.pm:88 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Rusers protokol omogućava korisnicima na mreži da identificiraju\n" "ko je prijavljen na ostalim računarima." #: services.pm:90 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similar to finger)." msgstr "" "Rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n" "korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)." #: services.pm:92 #, c-format msgid "" "SANE (Scanner Access Now Easy) enables to access scanners, video cameras, ..." msgstr "" #: services.pm:93 #, c-format msgid "" "The SMB/CIFS protocol enables to share access to files & printers and also " "integrates with a Windows Server domain" msgstr "" #: services.pm:94 #, c-format msgid "Launch the sound system on your machine" msgstr "Pokreće zvučni sistem na vašem računaru" #: services.pm:95 #, c-format msgid "" "Secure Shell is a network protocol that allows data to be exchanged over a " "secure channel between two computers" msgstr "" #: services.pm:96 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog je sistem pomoću kojeg mnogi servisi zapisuju poruke\n" "u razne sistemske dnevnike (logove). Pametno je uvijek imati pokrenuti " "syslog." #: services.pm:98 #, c-format msgid "Load the drivers for your usb devices." msgstr "Pokreće drajvere za vaše USB uređaje." #: services.pm:99 #, c-format msgid "Starts the X Font Server." msgstr "" #: services.pm:100 #, c-format msgid "Starts other deamons on demand." msgstr "" #: services.pm:123 #, c-format msgid "Printing" msgstr "Štampa" #: services.pm:124 #, c-format msgid "Internet" msgstr "Internet" #: services.pm:127 #, c-format msgid "File sharing" msgstr "Dijeljenje datoteka" #: services.pm:129 #, c-format msgid "System" msgstr "Sistem" #: services.pm:134 #, c-format msgid "Remote Administration" msgstr "Udaljena administracija" #: services.pm:142 #, c-format msgid "Database Server" msgstr "Server baze podataka" #: services.pm:153 services.pm:189 #, c-format msgid "Services" msgstr "Servisi" #: services.pm:153 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota" #: services.pm:171 #, c-format msgid "Services: %d activated for %d registered" msgstr "Servisi: %d aktiviran za %d registrovan" #: services.pm:205 #, c-format msgid "running" msgstr "aktivan" #: services.pm:205 #, c-format msgid "stopped" msgstr "zaustavljen" #: services.pm:210 #, c-format msgid "Services and daemons" msgstr "Servisi i demoni" #: services.pm:216 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" "Nema dodatnih informacija\n" "o ovom servisu, žalim." #: services.pm:221 ugtk2.pm:911 #, c-format msgid "Info" msgstr "Info" #: services.pm:224 #, c-format msgid "Start when requested" msgstr "Pokreni po potrebi" #: services.pm:224 #, c-format msgid "On boot" msgstr "Prilikom boota" #: services.pm:242 #, c-format msgid "Start" msgstr "Start" #: services.pm:242 #, c-format msgid "Stop" msgstr "Stop" #: standalone.pm:25 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, " "USA.\n" msgstr "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, " "USA.\n" #: standalone.pm:44 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Program za backup and restore\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" #: standalone.pm:56 #, c-format msgid "" "[--boot] [--splash]\n" "OPTIONS:\n" " --boot - enable to configure boot loader\n" " --splash - enable to configure boot theme\n" "default mode: offer to configure autologin feature" msgstr "" "[--boot] [--splash]\n" "OPCIJE:\n" " --boot - omogućuje podešavanje boot loadera\n" " --splash - omogućuje podešavanje boot teme\n" "podrazumijevano: podešavanje autologin mogućnosti" #: standalone.pm:61 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of Mandriva Linux tools\n" " --incident - program should be one of Mandriva Linux tools" msgstr "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPCIJE:\n" " --help - ispisuje ovu pomoć.\n" " --report - program treba biti neki od Mandriva Linux alata\n" " --incident - program treba biti neki od Mandriva Linux alata" #: standalone.pm:67 #, c-format msgid "" "[--add]\n" " --add - \"add a network interface\" wizard\n" " --del - \"delete a network interface\" wizard\n" " --skip-wizard - manage connections\n" " --internet - configure internet\n" " --wizard - like --add" msgstr "" "[--add]\n" " --add - čarobnjak \"dodaj mrežni interfejs\"\n" " --del - čarobnjak \"obriši mrežni interfejs\"\n" " --skip-wizard - upravljanje konekcijama\n" " --internet - podesi internet\n" " --wizard - isto što i --add" #: standalone.pm:73 #, c-format msgid "" "\n" "Font Importation and monitoring application\n" "\n" "OPTIONS:\n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--install : accept any font file and any directory.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" "\n" "Program za uvoz i nadzor fontova \n" "\n" "OPCIJE:\n" "--windows_import : uvezi sa dostupnih windows particija.\n" "--xls_fonts : prikaži sve postojeće fontove koje prijavljuje xls\n" "--install : instaliraj bilo koji font ili direktorij.\n" "--uninstall : deinstaliraj bilo koji font ili direktorij.\n" "--replace : zamijeni font ako vec postoji\n" "--application : 0 bez programa.\n" " : 1 podrška za sve poznate programe.\n" " : ime_programa npr. so za staroffice \n" " : i gs za ghostscript za samo taj program." #: standalone.pm:88 #, c-format msgid "" "[OPTIONS]...\n" "Mandriva Linux Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" "[OPTIONS]...\n" "Podešavanje Mandriva Linux Terminal Servera\n" "--enable : omogući MTS\n" "--disable : onemogući MTS\n" "--start : pokreni MTS\n" "--stop : zaustavi MTS\n" "--adduser : dodaj postojećeg sistemskog korisnika MTSu (potrebno je " "korisničko ime)\n" "--deluser : obriši postojećeg sistemskog korisnika sa MTSa (potrebno " "je korisničko ime)\n" "--addclient : dodaj klijentski računar MTSu (potrebna je MAC adresa, " "IP, nbi image ime)\n" "--delclient : obriši klijentski računar sa MTSa (potrebna je MAC " "adresa, IP, nbi image ime)" #: standalone.pm:100 #, c-format msgid "[keyboard]" msgstr "[tastatura]" #: standalone.pm:101 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]" #: standalone.pm:102 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : do not be interactive. To be used with (dis)connect." msgstr "" "[OPTIONS]\n" "Program za povezivanje na mrežu/Internet i nadzor veze\n" "\n" "--defaultintf interface : podesi podrazumijevani interfejs\n" "--connect : spoji se na Inernet, ako nisi već spojen\n" "--disconnect : prekini vezu s Internetom, ako si spojen\n" "--force : koristi se sa (dis)connect : prinudi operaciju.\n" "--status : vraća 1 ako je spojen, u suprotnom 0.\n" "--quiet : bez interaktivnosti. Koristi se sa (dis)connect." #: standalone.pm:112 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation do not ask first confirmation question in Mandriva " "Update mode\n" " --no-verify-rpm do not verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" "[OPTION]...\n" " --no-confirmation ne postavljaj prvo pitanje u Mandriva Update modu\n" " --no-verify-rpm ne provjeravaj potpise paketa\n" " --changelog-first prikaži changelog prije filelist u opisnom prozoru\n" " --merge-all-rpmnew predloži merge svih pronađenih .rpmnew/.rpmsave " "datoteka" #: standalone.pm:117 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" #: standalone.pm:118 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake rezolucija" #: standalone.pm:154 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" "\n" "Upotreba: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " #: timezone.pm:150 timezone.pm:151 #, c-format msgid "All servers" msgstr "Svi serveri" #: timezone.pm:185 #, c-format msgid "Global" msgstr "Globalno" #: timezone.pm:188 #, c-format msgid "Africa" msgstr "Afrika" #: timezone.pm:189 #, c-format msgid "Asia" msgstr "Azija" #: timezone.pm:190 #, c-format msgid "Europe" msgstr "Evropa" #: timezone.pm:191 #, c-format msgid "North America" msgstr "Sjeverna Amerika" #: timezone.pm:192 #, c-format msgid "Oceania" msgstr "Okeanija" #: timezone.pm:193 #, c-format msgid "South America" msgstr "Južna Amerika" #: timezone.pm:202 #, c-format msgid "Hong Kong" msgstr "Hong Kong" #: timezone.pm:239 #, c-format msgid "Russian Federation" msgstr "Ruska Federacija" #: timezone.pm:247 #, c-format msgid "Yugoslavia" msgstr "Jugoslavija" #: ugtk2.pm:801 #, c-format msgid "Is this correct?" msgstr "Da li je ovo ispravno?" #: ugtk2.pm:861 #, c-format msgid "No file chosen" msgstr "Nije izabrana datoteka" #: ugtk2.pm:863 #, c-format msgid "You have chosen a file, not a directory" msgstr "Izabrali ste datoteku, a ne direktorij" #: ugtk2.pm:865 #, c-format msgid "You have chosen a directory, not a file" msgstr "Izabrali ste direktorij, a ne datoteku" #: ugtk2.pm:867 #, c-format msgid "No such directory" msgstr "Nema tog direktorija" #: ugtk2.pm:867 #, c-format msgid "No such file" msgstr "Nema te datoteke" #: ugtk2.pm:946 #, c-format msgid "Expand Tree" msgstr "Proširi stablo" #: ugtk2.pm:947 #, c-format msgid "Collapse Tree" msgstr "Smanji stablo" #: ugtk2.pm:948 #, c-format msgid "Toggle between flat and group sorted" msgstr "Ravno / složeno po grupama" #: wizards.pm:95 #, c-format msgid "" "%s is not installed\n" "Click \"Next\" to install or \"Cancel\" to quit" msgstr "" "%s nije instaliran\n" "Kliknite na \"Dalje\" da ga instalirate ili \"Odustani\" za izlaz" #: wizards.pm:99 #, c-format msgid "Installation failed" msgstr "Instalacija nije uspjela" #~ msgid "Undo" #~ msgstr "Poništi" #~ msgid "Save partition table" #~ msgstr "Snimi tabelu particija" #~ msgid "Restore partition table" #~ msgstr "Vrati tabelu particija" #~ msgid "Select file" #~ msgstr "Izaberite datoteku" #~ msgid "" #~ "The backup partition table has not the same size\n" #~ "Still continue?" #~ msgstr "" #~ "Backup tabela particija nema istu veličinu\n" #~ "Da svejedno nastavim?" #~ msgid "Info: " #~ msgstr "Info: " #~ msgid "Unknown driver" #~ msgstr "Nepoznat drajver" #~ msgid "Error reading file %s" #~ msgstr "Greška u čitanju datoteke %s" #~ msgid "Restoring from file %s failed: %s" #~ msgstr "Povratak iz datoteke %s nije uspio: %s" #~ msgid "Bad backup file" #~ msgstr "Loša backup datoteka" #~ msgid "Error writing to file %s" #~ msgstr "Greška u pisanju datoteke: %s" #~ msgid "Error: The \"%s\" driver for your sound card is unlisted" #~ msgstr "Greška: Drajver \"%s\" za vašu zvučnu karticu nije na listi" #~ msgid "Ext2" #~ msgstr "Ext2" #~ msgid "Journalised FS" #~ msgstr "Journalised FS" #~ msgid "Starts the X Font Server (this is mandatory for Xorg to run)." #~ msgstr "Pokreće X Font Server (ovo je nužno da bi Xorg radio)." #~ msgid "Add user" #~ msgstr "Dodaj korisnika" #~ msgid "Accept user" #~ msgstr "Prihvati korisnika" #, fuzzy #~ msgid "" #~ "Do not update directory inode access times on this filesystem\n" #~ "(e.g, for faster access on the news spool to speed up news servers)." #~ msgstr "" #~ "Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu\n" #~ "(npr. radi bržeg pristupa spool-u na news serverima)." #~ msgid "No supermount" #~ msgstr "Bez supermounta" #~ msgid "Supermount" #~ msgstr "Supermount" #~ msgid "Supermount except for CDROM drives" #~ msgstr "Supermount osim za CD-ROM uređaje" #~ msgid "Rescue partition table" #~ msgstr "Spasi tabelu particija" #~ msgid "Removable media automounting" #~ msgstr "Automatsko montiranje izmjenjivih medija" #~ msgid "Trying to rescue partition table" #~ msgstr "Pokušavam da spasim tabelu particija" #~ msgid "" #~ "Use local for all authentication and information user tell in local file" #~ msgstr "" #~ "Koristite \"lokalno\" za provjeru identiteta i informacije o korisnicima " #~ "u lokalnoj datoteci" #~ msgid "Accept/Refuse bogus IPv4 error messages." #~ msgstr "Prihvati/odbij neispravne IPv4 poruke o grešci." #~ msgid "Accept/Refuse broadcasted icmp echo." #~ msgstr "Dozvoli/zabrani broadcast-ovani ICMP eho." #~ msgid "Accept/Refuse icmp echo." #~ msgstr "Prihvati/odbij ICMP eho." #~ msgid "Allow/Forbid remote root login." #~ msgstr "Dozvoli/zabrani prijavu kao root sa udaljenog računara" #~ msgid "Enable/Disable IP spoofing protection." #~ msgstr "Uključi/isključi zaštitu od lažiranja IP adrese." #~ msgid "Enable/Disable libsafe if libsafe is found on the system." #~ msgstr "Uključi/isključi libsafe ako je libsafe pronađen na sistemu." #~ msgid "Enable/Disable the logging of IPv4 strange packets." #~ msgstr "Uključi/isključi logiranje čudnih IPv4 paketa." #~ msgid "Enable/Disable msec hourly security check." #~ msgstr "Uključi/isključi msec provjeru svakog sata." #~ msgid "Icon" #~ msgstr "Ikona" #~ msgid "Number of capture buffers:" #~ msgstr "Broj capture buffera:" #~ msgid "number of capture buffers for mmap'ed capture" #~ msgstr "broj capture buffera za mmap-ovani capture" #~ msgid "PLL setting:" #~ msgstr "PLL postavka:" #~ msgid "Radio support:" #~ msgstr "Podrška za radio:" #~ msgid "enable radio support" #~ msgstr "uključi radio podršku" #~ msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" #~ msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" '>4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725 8726 8727 8728 8729 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 8779 8780 8781 8782 8783 8784 8785 8786 8787 8788 8789 8790 8791 8792 8793 8794 8795 8796 8797 8798 8799 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 8820 8821 8822 8823 8824 8825 8826 8827 8828 8829 8830 8831 8832 8833 8834 8835 8836 8837 8838 8839 8840 8841 8842 8843 8844 8845 8846 8847 8848 8849 8850 8851 8852 8853 8854 8855 8856 8857 8858 8859 8860 8861 8862 8863 8864 8865 8866 8867 8868 8869 8870 8871 8872 8873 8874 8875 8876 8877 8878 8879 8880 8881 8882 8883 8884 8885 8886 8887 8888 8889 8890 8891 8892 8893 8894 8895 8896 8897 8898 8899 8900 8901 8902 8903 8904 8905 8906 8907 8908 8909 8910 8911 8912 8913 8914 8915 8916 8917 8918 8919 8920 8921 8922 8923 8924 8925 8926 8927 8928 8929 8930 8931 8932 8933 8934 8935 8936 8937 8938 8939 8940 8941 8942 8943 8944 8945 8946 8947 8948 8949 8950 8951 8952 8953 8954 8955 8956 8957 8958 8959 8960 8961 8962 8963 8964 8965 8966 8967 8968 8969 8970 8971 8972 8973 8974 8975 8976 8977 8978 8979 8980 8981 8982 8983 8984 8985 8986 8987 8988 8989 8990 8991 8992 8993 8994 8995 8996 8997 8998 8999 9000 9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9011 9012 9013 9014 9015 9016 9017 9018 9019 9020 9021 9022 9023 9024 9025 9026 9027 9028 9029 9030 9031 9032 9033 9034 9035 9036 9037 9038 9039 9040 9041 9042 9043 9044 9045 9046 9047 9048 9049 9050 9051 9052 9053 9054 9055 9056 9057 9058 9059 9060 9061 9062 9063 9064 9065 9066 9067 9068 9069 9070 9071 9072 9073 9074 9075 9076 9077 9078 9079 9080 9081 9082 9083 9084 9085 9086 9087 9088 9089 9090 9091 9092 9093 9094 9095 9096 9097 9098 9099 9100 9101 9102 9103 9104 9105 9106 9107 9108 9109 9110 9111 9112 9113 9114 9115 9116 9117 9118 9119 9120 9121 9122 9123 9124 9125 9126 9127 9128 9129 9130 9131 9132 9133 9134 9135 9136 9137 9138 9139 9140 9141 9142 9143 9144 9145 9146 9147 9148 9149 9150 9151 9152 9153 9154 9155 9156 9157 9158 9159 9160 9161 9162 9163 9164 9165 9166 9167 9168 9169 9170 9171 9172 9173 9174 9175 9176 9177 9178 9179 9180 9181 9182 9183 9184 9185 9186 9187 9188 9189 9190 9191 9192 9193 9194 9195 9196 9197 9198 9199 9200 9201 9202 9203 9204 9205 9206 9207 9208 9209 9210 9211 9212 9213 9214 9215 9216 9217 9218 9219 9220 9221 9222 9223 9224 9225 9226 9227 9228 9229 9230 9231 9232 9233 9234 9235 9236 9237 9238 9239 9240 9241 9242 9243 9244 9245 9246 9247 9248 9249 9250 9251 9252 9253 9254 9255 9256 9257 9258 9259 9260 9261 9262 9263 9264 9265 9266 9267 9268 9269 9270 9271 9272 9273 9274 9275 9276 9277 9278 9279 9280 9281 9282 9283 9284 9285 9286 9287 9288 9289 9290 9291 9292 9293 9294 9295 9296 9297 9298 9299 9300 9301 9302 9303 9304 9305 9306 9307 9308 9309 9310 9311 9312 9313 9314 9315 9316 9317 9318 9319 9320 9321 9322 9323 9324 9325 9326 9327 9328 9329 9330 9331 9332 9333 9334 9335 9336 9337 9338 9339 9340 9341 9342 9343 9344 9345 9346 9347 9348 9349 9350 9351 9352 9353 9354 9355 9356 9357 9358 9359 9360 9361 9362 9363 9364 9365 9366 9367 9368 9369 9370 9371 9372 9373 9374 9375 9376 9377 9378 9379 9380 9381 9382 9383 9384 9385 9386 9387 9388 9389 9390 9391 9392 9393 9394 9395 9396 9397 9398 9399 9400 9401 9402 9403 9404 9405 9406 9407 9408 9409 9410 9411 9412 9413 9414 9415 9416 9417 9418 9419 9420 9421 9422 9423 9424 9425 9426 9427 9428 9429 9430 9431 9432 9433 9434 9435 9436 9437 9438 9439 9440 9441 9442 9443 9444 9445 9446 9447 9448 9449 9450 9451 9452 9453 9454 9455 9456 9457 9458 9459 9460 9461 9462 9463 9464 9465 9466 9467 9468 9469 9470 9471 9472 9473 9474 9475 9476 9477 9478 9479 9480 9481 9482 9483 9484 9485 9486 9487 9488 9489 9490 9491 9492 9493 9494 9495 9496 9497 9498 9499 9500 9501 9502 9503 9504 9505 9506 9507 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9562 9563 9564 9565 9566 9567 9568 9569 9570 9571 9572 9573 9574 9575 9576 9577 9578 9579 9580 9581 9582 9583 9584 9585 9586 9587 9588 9589 9590 9591 9592 9593 9594 9595 9596 9597 9598 9599 9600 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 9670 9671 9672 9673 9674 9675 9676 9677 9678 9679 9680 9681 9682 9683 9684 9685 9686 9687 9688 9689 9690 9691 9692 9693 9694 9695 9696 9697 9698 9699 9700 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9743 9744 9745 9746 9747 9748 9749 9750 9751 9752 9753 9754 9755 9756 9757 9758 9759 9760 9761 9762 9763 9764 9765 9766 9767 9768 9769 9770 9771 9772 9773 9774 9775 9776 9777 9778 9779 9780 9781 9782 9783 9784 9785 9786 9787 9788 9789 9790 9791 9792 9793 9794 9795 9796 9797 9798 9799 9800 9801 9802 9803 9804 9805 9806 9807 9808 9809 9810 9811 9812 9813 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9843 9844 9845 9846 9847 9848 9849 9850 9851 9852 9853 9854 9855 9856 9857 9858 9859 9860 9861 9862 9863 9864 9865 9866 9867 9868 9869 9870 9871 9872 9873 9874 9875 9876 9877 9878 9879 9880 9881 9882 9883 9884 9885 9886 9887 9888 9889 9890 9891 9892 9893 9894 9895 9896 9897 9898 9899 9900 9901 9902 9903 9904 9905 9906 9907 9908 9909 9910 9911 9912 9913 9914 9915 9916 9917 9918 9919 9920 9921 9922 9923 9924 9925 9926 9927 9928 9929 9930 9931 9932 9933 9934 9935 9936 9937 9938 9939 9940 9941 9942 9943 9944 9945 9946 9947 9948 9949 9950 9951 9952 9953 9954 9955 9956 9957 9958 9959 9960 9961 9962 9963 9964 9965 9966 9967 9968 9969 9970 9971 9972 9973 9974 9975 9976 9977 9978 9979 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 9995 9996 9997 9998 9999 10000 10001 10002 10003 10004 10005 10006 10007 10008 10009 10010 10011 10012 10013 10014 10015 10016 10017 10018 10019 10020 10021 10022 10023 10024 10025 10026 10027 10028 10029 10030 10031 10032 10033 10034 10035 10036 10037 10038 10039 10040 10041 10042 10043 10044 10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059 10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074 10075 10076 10077 10078 10079 10080 10081 10082 10083 10084 10085 10086 10087 10088 10089 10090 10091 10092 10093 10094 10095 10096 10097 10098 10099 10100 10101 10102 10103 10104 10105 10106 10107 10108 10109 10110 10111 10112 10113 10114 10115 10116 10117 10118 10119 10120 10121 10122 10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10133 10134 10135 10136 10137 10138 10139 10140 10141 10142 10143 10144 10145 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10157 10158 10159 10160 10161 10162 10163 10164 10165 10166 10167 10168 10169 10170 10171 10172 10173 10174 10175 10176 10177 10178 10179 10180 10181 10182 10183 10184 10185 10186 10187 10188 10189 10190 10191 10192 10193 10194 10195 10196 10197 10198 10199 10200 10201 10202 10203 10204 10205 10206 10207 10208 10209 10210 10211 10212 10213 10214 10215 10216 10217 10218 10219 10220 10221 10222 10223 10224 10225 10226 10227 10228 10229 10230 10231 10232 10233 10234 10235 10236 10237 10238 10239 10240 10241 10242 10243 10244 10245 10246 10247 10248 10249 10250 10251 10252 10253 10254 10255 10256 10257 10258 10259 10260 10261 10262 10263 10264 10265 10266 10267 10268 10269 10270 10271 10272 10273 10274 10275 10276 10277 10278 10279 10280 10281 10282 10283 10284 10285 10286 10287 10288 10289 10290 10291 10292 10293 10294 10295 10296 10297 10298 10299 10300 10301 10302 10303 10304 10305 10306 10307 10308 10309 10310 10311 10312 10313 10314 10315 10316 10317 10318 10319 10320 10321 10322 10323 10324 10325 10326 10327 10328 10329 10330 10331 10332 10333 10334 10335 10336 10337 10338 10339 10340 10341 10342 10343 10344 10345 10346 10347 10348 10349 10350 10351 10352 10353 10354 10355 10356 10357 10358 10359 10360 10361 10362 10363 10364 10365 10366 10367 10368 10369 10370 10371 10372 10373 10374 10375 10376 10377 10378 10379 10380 10381 10382 10383 10384 10385 10386 10387 10388 10389 10390 10391 10392 10393 10394 10395 10396 10397 10398 10399 10400 10401 10402 10403 10404 10405 10406 10407 10408 10409 10410 10411 10412 10413 10414 10415 10416 10417 10418 10419 10420 10421 10422 10423 10424 10425 10426 10427 10428 10429 10430 10431 10432 10433 10434 10435 10436 10437 10438 10439 10440 10441 10442 10443 10444 10445 10446 10447 10448 10449 10450 10451 10452 10453 10454 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548 10549 10550 10551 10552 10553 10554 10555 10556 10557 10558 10559 10560 10561 10562 10563 10564 10565 10566 10567 10568 10569 10570 10571 10572 10573 10574 10575 10576 10577 10578 10579 10580 10581 10582 10583 10584 10585 10586 10587 10588 10589 10590 10591 10592 10593 10594 10595 10596 10597 10598 10599 10600 10601 10602 10603 10604 10605 10606 10607 10608 10609 10610 10611 10612 10613 10614 10615 10616 10617 10618 10619 10620 10621 10622 10623 10624 10625 10626 10627 10628 10629 10630 10631 10632 10633 10634 10635 10636 10637 10638 10639 10640 10641 10642 10643 10644 10645 10646 10647 10648 10649 10650 10651 10652 10653 10654 10655 10656 10657 10658 10659 10660 10661 10662 10663 10664 10665 10666 10667 10668 10669 10670 10671 10672 10673 10674 10675 10676 10677 10678 10679 10680 10681 10682 10683 10684 10685 10686 10687 10688 10689 10690 10691 10692 10693 10694 10695 10696 10697 10698 10699 10700 10701 10702 10703 10704 10705 10706 10707 10708 10709 10710 10711 10712 10713 10714 10715 10716 10717 10718 10719 10720 10721 10722 10723 10724 10725 10726 10727 10728 10729 10730 10731 10732 10733 10734 10735 10736 10737 10738 10739 10740 10741 10742 10743 10744 10745 10746 10747 10748 10749 10750 10751 10752 10753 10754 10755 10756 10757 10758 10759 10760 10761 10762 10763 10764 10765 10766 10767 10768 10769 10770 10771 10772 10773 10774 10775 10776 10777 10778 10779 10780 10781 10782 10783 10784 10785 10786 10787 10788 10789 10790 10791 10792 10793 10794 10795 10796 10797 10798 10799 10800 10801 10802 10803 10804 10805 10806 10807 10808 10809 10810 10811 10812 10813 10814 10815 10816 10817 10818 10819 10820 10821 10822 10823 10824 10825 10826 10827 10828 10829 10830 10831 10832 10833 10834 10835 10836 10837 10838 10839 10840 10841 10842 10843 10844 10845 10846 10847 10848 10849 10850 10851 10852 10853 10854 10855 10856 10857 10858 10859 10860 10861 10862 10863 10864 10865 10866 10867 10868 10869 10870 10871 10872 10873 10874 10875 10876 10877 10878 10879 10880 10881 10882 10883 10884 10885 10886 10887 10888 10889 10890 10891 10892 10893 10894 10895 10896 10897 10898 10899 10900 10901 10902 10903 10904 10905 10906 10907 10908 10909 10910 10911 10912 10913 10914 10915 10916 10917 10918 10919 10920 10921 10922 10923 10924 10925 10926 10927 10928 10929 10930 10931 10932 10933 10934 10935 10936 10937 10938 10939 10940 10941 10942 10943 10944 10945 10946 10947 10948 10949 10950 10951 10952 10953 10954 10955 10956 10957 10958 10959 10960 10961 10962 10963 10964 10965 10966 10967 10968 10969 10970 10971 10972 10973 10974 10975 10976 10977 10978 10979 10980 10981 10982 10983 10984 10985 10986 10987 10988 10989 10990 10991 10992 10993 10994 10995 10996 10997 10998 10999 11000 11001 11002 11003 11004 11005 11006 11007 11008 11009 11010 11011 11012 11013 11014 11015 11016 11017 11018 11019 11020 11021 11022 11023 11024 11025 11026 11027 11028 11029 11030 11031 11032 11033 11034 11035 11036 11037 11038 11039 11040 11041 11042 11043 11044 11045 11046 11047 11048 11049 11050 11051 11052 11053 11054 11055 11056 11057 11058 11059 11060 11061 11062 11063 11064 11065 11066 11067 11068 11069 11070 11071 11072 11073 11074 11075 11076 11077 11078 11079 11080 11081 11082 11083 11084 11085 11086 11087 11088 11089 11090 11091 11092 11093 11094 11095 11096 11097 11098 11099 11100 11101 11102 11103 11104 11105 11106 11107 11108 11109 11110 11111 11112 11113 11114 11115 11116 11117 11118 11119 11120 11121 11122 11123 11124 11125 11126 11127 11128 11129 11130 11131 11132 11133 11134 11135 11136 11137 11138 11139 11140 11141 11142 11143 11144 11145 11146 11147 11148 11149 11150 11151 11152 11153 11154 11155 11156 11157 11158 11159 11160 11161 11162 11163 11164 11165 11166 11167 11168 11169 11170 11171 11172 11173 11174 11175 11176 11177 11178 11179 11180 11181 11182 11183 11184 11185 11186 11187 11188 11189 11190 11191 11192 11193 11194 11195 11196 11197 11198 11199 11200 11201 11202 11203 11204 11205 11206 11207 11208 11209 11210 11211 11212 11213 11214 11215 11216 11217 11218 11219 11220 11221 11222 11223 11224 11225 11226 11227 11228 11229 11230 11231 11232 11233 11234 11235 11236 11237 11238 11239 11240 11241 11242 11243 11244 11245 11246 11247 11248 11249 11250 11251 11252 11253 11254 11255 11256 11257 11258 11259 11260 11261 11262 11263 11264 11265 11266 11267 11268 11269 11270 11271 11272 11273 11274 11275 11276 11277 11278 11279 11280 11281 11282 11283 11284 11285 11286 11287 11288 11289 11290 11291 11292 11293 11294 11295 11296 11297 11298 11299 11300 11301 11302 11303 11304 11305 11306 11307 11308 11309 11310 11311 11312 11313 11314 11315 11316 11317 11318 11319 11320 11321 11322 11323 11324 11325 11326 11327 11328 11329 11330 11331 11332 11333 11334 11335 11336 11337 11338 11339 11340 11341 11342 11343 11344 11345 11346 11347 11348 11349 11350 11351 11352 11353 11354 11355 11356 11357 11358 11359 11360 11361 11362 11363 11364 11365 11366 11367 11368 11369 11370 11371 11372 11373 11374 11375 11376 11377 11378 11379 11380 11381 11382 11383 11384 11385 11386 11387 11388 11389 11390 11391 11392 11393 11394 11395 11396 11397 11398 11399 11400 11401 11402 11403 11404 11405 11406 11407 11408 11409 11410 11411 11412 11413 11414 11415 11416 11417 11418 11419 11420 11421 11422 11423 11424 11425 11426 11427 11428 11429 11430 11431 11432 11433 11434 11435 11436 11437 11438 11439 11440 11441 11442 11443 11444 11445 11446 11447 11448 11449 11450 11451 11452 11453 11454 11455 11456 11457 11458 11459 11460 11461 11462 11463 11464 11465 11466 11467 11468 11469 11470 11471 11472 11473 11474 11475 11476 11477 11478 11479 11480 11481 11482 11483 11484 11485 11486 11487 11488 11489 11490 11491 11492 11493 11494 11495 11496 11497 11498 11499 11500 11501 11502 11503 11504 11505 11506 11507 11508 11509 11510 11511 11512 11513 11514 11515 11516 11517 11518 11519 11520 11521 11522 11523 11524 11525 11526 11527 11528 11529 11530 11531 11532 11533 11534 11535 11536 11537 11538 11539 11540 11541 11542 11543 11544 11545 11546 11547 11548 11549 11550 11551 11552 11553 11554 11555 11556 11557 11558 11559 11560 11561 11562 11563 11564 11565 11566 11567 11568 11569 11570 11571 11572 11573 11574 11575 11576 11577 11578 11579 11580 11581 11582 11583 11584 11585 11586 11587 11588 11589 11590 11591 11592 11593 11594 11595 11596 11597 11598 11599 11600 11601 11602 11603 11604 11605 11606 11607 11608 11609 11610 11611 11612 11613 11614 11615 11616 11617 11618 11619 11620 11621 11622 11623 11624 11625 11626 11627 11628 11629 11630 11631 11632 11633 11634 11635 11636 11637 11638 11639 11640 11641 11642 11643 11644 11645 11646 11647 11648 11649 11650 11651 11652 11653 11654 11655 11656 11657 11658 11659 11660 11661 11662 11663 11664 11665 11666 11667 11668 11669 11670 11671 11672 11673 11674 11675 11676 11677 11678 11679 11680 11681 11682 11683 11684 11685 11686 11687 11688 11689 11690 11691 11692 11693 11694 11695 11696 11697 11698 11699 11700 11701 11702 11703 11704 11705 11706 11707 11708 11709 11710 11711 11712 11713 11714 11715 11716 11717 11718 11719 11720 11721 11722 11723 11724 11725 11726 11727 11728 11729 11730 11731 11732 11733 11734 11735 11736 11737 11738 11739 11740 11741 11742 11743 11744 11745 11746 11747 11748 11749 11750 11751 11752 11753 11754 11755 11756 11757 11758 11759 11760 11761 11762 11763 11764 11765 11766 11767 11768 11769 11770 11771 11772 11773 11774 11775 11776 11777 11778 11779 11780 11781 11782 11783 11784 11785 11786 11787 11788 11789 11790 11791 11792 11793 11794 11795 11796 11797 11798 11799 11800 11801 11802 11803 11804 11805 11806 11807 11808 11809 11810 11811 11812 11813 11814 11815 11816 11817 11818 11819 11820 11821 11822 11823 11824 11825 11826 11827 11828 11829 11830 11831 11832 11833 11834 11835 11836 11837 11838 11839 11840 11841 11842 11843 11844 11845 11846 11847 11848 11849 11850 11851 11852 11853 11854 11855 11856 11857 11858 11859 11860 11861 11862 11863 11864 11865 11866 11867 11868 11869 11870 11871 11872 11873 11874 11875 11876 11877 11878 11879 11880 11881 11882 11883 11884 11885 11886 11887 11888 11889 11890 11891 11892 11893 11894 11895 11896 11897 11898 11899 11900 11901 11902 11903 11904 11905 11906 11907 11908 11909 11910 11911 11912 11913 11914 11915 11916 11917 11918 11919 11920 11921 11922 11923 11924 11925 11926 11927 11928 11929 11930 11931 11932 11933 11934 11935 11936 11937 11938 11939 11940 11941 11942 11943 11944 11945 11946 11947 11948 11949 11950 11951 11952 11953 11954 11955 11956 11957 11958 11959 11960 11961 11962 11963 11964 11965 11966 11967 11968 11969 11970 11971 11972 11973 11974 11975 11976 11977 11978 11979 11980 11981 11982 11983 11984 11985 11986 11987 11988 11989 11990 11991 11992 11993 11994 11995 11996 11997 11998 11999 12000 12001 12002 12003 12004 12005 12006 12007 12008 12009 12010 12011 12012 12013 12014 12015 12016 12017 12018 12019 12020 12021 12022 12023 12024 12025 12026 12027 12028 12029 12030 12031 12032 12033 12034 12035 12036 12037 12038 12039 12040 12041 12042 12043 12044 12045 12046 12047 12048 12049 12050 12051 12052 12053 12054 12055 12056 12057 12058 12059 12060 12061 12062 12063 12064 12065 12066 12067 12068 12069 12070 12071 12072 12073 12074 12075 12076 12077 12078 12079 12080 12081 12082 12083 12084 12085 12086 12087 12088 12089 12090 12091 12092 12093 12094 12095 12096 12097 12098 12099 12100 12101 12102 12103 12104 12105 12106 12107 12108 12109 12110 12111 12112 12113 12114 12115 12116 12117 12118 12119 12120 12121 12122 12123 12124 12125 12126 12127 12128 12129 12130 12131 12132 12133 12134 12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146 12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182 12183 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203 12204 12205 12206 12207 12208 12209 12210 12211 12212 12213 12214 12215 12216 12217 12218 12219 12220 12221 12222 12223 12224 12225 12226 12227 12228 12229 12230 12231 12232 12233 12234 12235 12236 12237 12238 12239 12240 12241 12242 12243 12244 12245 12246 12247 12248 12249 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 12260 12261 12262 12263 12264 12265 12266 12267 12268 12269 12270 12271 12272 12273 12274 12275 12276 12277 12278 12279 12280 12281 12282 12283 12284 12285 12286 12287 12288 12289 12290 12291 12292 12293 12294 12295 12296 12297 12298 12299 12300 12301 12302 12303 12304 12305 12306 12307 12308 12309 12310 12311 12312 12313 12314 12315 12316 12317 12318 12319 12320 12321 12322 12323 12324 12325 12326 12327 12328 12329 12330 12331 12332 12333 12334 12335 12336 12337 12338 12339 12340 12341 12342 12343 12344 12345 12346 12347 12348 12349 12350 12351 12352 12353 12354 12355 12356 12357 12358 12359 12360 12361 12362 12363 12364 12365 12366 12367 12368 12369 12370 12371 12372 12373 12374 12375 12376 12377 12378 12379 12380 12381 12382 12383 12384 12385 12386 12387 12388 12389 12390 12391 12392 12393 12394 12395 12396 12397 12398 12399 12400 12401 12402 12403 12404 12405 12406 12407 12408 12409 12410 12411 12412 12413 12414 12415 12416 12417 12418 12419 12420 12421 12422 12423 12424 12425 12426 12427 12428 12429 12430 12431 12432 12433 12434 12435 12436 12437 12438 12439 12440 12441 12442 12443 12444 12445 12446 12447 12448 12449 12450 12451 12452 12453 12454 12455 12456 12457 12458 12459 12460 12461 12462 12463 12464 12465 12466 12467 12468 12469 12470 12471 12472 12473 12474 12475 12476 12477 12478 12479 12480 12481 12482 12483 12484 12485 12486 12487 12488 12489 12490 12491 12492 12493 12494 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513 12514 12515 12516 12517 12518 12519 12520 12521 12522 12523 12524 12525 12526 12527 12528 12529 12530 12531 12532 12533 12534 12535 12536 12537 12538 12539 12540 12541 12542 12543 12544 12545 12546 12547 12548 12549 12550 12551 12552 12553 12554 12555 12556 12557 12558 12559 12560 12561 12562 12563 12564 12565 12566 12567 12568 12569 12570 12571 12572 12573 12574 12575 12576 12577 12578 12579 12580 12581 12582 12583 12584 12585 12586 12587 12588 12589 12590 12591 12592 12593 12594 12595 12596 12597 12598 12599 12600 12601 12602 12603 12604 12605 12606 12607 12608 12609 12610 12611 12612 12613 12614 12615 12616 12617 12618 12619 12620 12621 12622 12623 12624 12625 12626 12627 12628 12629 12630 12631 12632 12633 12634 12635 12636 12637 12638 12639 12640 12641 12642 12643 12644 12645 12646 12647 12648 12649 12650 12651 12652 12653 12654 12655 12656 12657 12658 12659 12660 12661 12662 12663 12664 12665 12666 12667 12668 12669 12670 12671 12672 12673 12674 12675 12676 12677 12678 12679 12680 12681 12682 12683 12684 12685 12686 12687 12688 12689 12690 12691 12692 12693 12694 12695 12696 12697 12698 12699 12700 12701 12702 12703 12704 12705 12706 12707 12708 12709 12710 12711 12712 12713 12714 12715 12716 12717 12718 12719 12720 12721 12722 12723 12724 12725 12726 12727 12728 12729 12730 12731 12732 12733 12734 12735 12736 12737 12738 12739 12740 12741 12742 12743 12744 12745 12746 12747 12748 12749 12750 12751 12752 12753 12754 12755 12756 12757 12758 12759 12760 12761 12762 12763 12764 12765 12766 12767 12768 12769 12770 12771 12772 12773 12774 12775 12776 12777 12778 12779 12780 12781 12782 12783 12784 12785 12786 12787 12788 12789 12790 12791 12792 12793 12794 12795 12796 12797 12798 12799 12800 12801 12802 12803 12804 12805 12806 12807 12808 12809 12810 12811 12812 12813 12814 12815 12816 12817 12818 12819 12820 12821 12822 12823 12824 12825 12826 12827 12828 12829 12830 12831 12832 12833 12834 12835 12836 12837 12838 12839 12840 12841 12842 12843 12844 12845 12846 12847 12848 12849 12850 12851 12852 12853 12854 12855 12856 12857 12858 12859 12860 12861 12862 12863 12864 12865 12866 12867 12868 12869 12870 12871 12872 12873 12874 12875 12876 12877 12878 12879 12880 12881 12882 12883 12884 12885 12886 12887 12888 12889 12890 12891 12892 12893 12894 12895 12896 12897 12898 12899 12900 12901 12902 12903 12904 12905 12906 12907 12908 12909 12910 12911 12912 12913 12914 12915 12916 12917 12918 12919 12920 12921 12922 12923 12924 12925 12926 12927 12928 12929 12930 12931 12932 12933 12934 12935 12936 12937 12938 12939 12940 12941 12942 12943 12944 12945 12946 12947 12948 12949 12950 12951 12952 12953 12954 12955 12956 12957 12958 12959 12960 12961 12962 12963 12964 12965 12966 12967 12968 12969 12970 12971 12972 12973 12974 12975 12976 12977 12978 12979 12980 12981 12982 12983 12984 12985 12986 12987 12988 12989 12990 12991 12992 12993 12994 12995 12996 12997 12998 12999 13000 13001 13002 13003 13004 13005 13006 13007 13008 13009 13010 13011 13012 13013 13014 13015 13016 13017 13018 13019 13020 13021 13022 13023 13024 13025 13026 13027 13028 13029 13030 13031 13032 13033 13034 13035 13036 13037 13038 13039 13040 13041 13042 13043 13044 13045 13046 13047 13048 13049 13050 13051 13052 13053 13054 13055 13056 13057 13058 13059 13060 13061 13062 13063 13064 13065 13066 13067 13068 13069 13070 13071 13072 13073 13074 13075 13076 13077 13078 13079 13080 13081 13082 13083 13084 13085 13086 13087 13088 13089 13090 13091 13092 13093 13094 13095 13096 13097 13098 13099 13100 13101 13102 13103 13104 13105 13106 13107 13108 13109 13110 13111 13112 13113 13114 13115 13116 13117 13118 13119 13120 13121 13122 13123 13124 13125 13126 13127 13128 13129 13130 13131 13132 13133 13134 13135 13136 13137 13138 13139 13140 13141 13142 13143 13144 13145 13146 13147 13148 13149 13150 13151 13152 13153 13154 13155 13156 13157 13158 13159 13160 13161 13162 13163 13164 13165 13166 13167 13168 13169 13170 13171 13172 13173 13174 13175 13176 13177 13178 13179 13180 13181 13182 13183 13184 13185 13186 13187 13188 13189 13190 13191 13192 13193 13194 13195 13196 13197 13198 13199 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 13210 13211 13212 13213 13214 13215 13216 13217 13218 13219 13220 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238 13239 13240 13241 13242 13243 13244 13245 13246 13247 13248 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264 13265 13266 13267 13268 13269 13270 13271 13272 13273 13274 13275 13276 13277 13278 13279 13280 13281 13282 13283 13284 13285 13286 13287 13288 13289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13391 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619 13620 13621 13622 13623 13624 13625 13626 13627 13628 13629 13630 13631 13632 13633 13634 13635 13636 13637 13638 13639 13640 13641 13642 13643 13644 13645 13646 13647 13648 13649 13650 13651 13652 13653 13654 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677 13678 13679 13680 13681 13682 13683 13684 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696 13697 13698 13699 13700 13701 13702 13703 13704 13705 13706 13707 13708 13709 13710 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784 13785 13786 13787 13788 13789 13790 13791 13792 13793 13794 13795 13796 13797 13798 13799 13800 13801 13802 13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13821 13822 13823 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878 13879 13880 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13892 13893 13894 13895 13896 13897 13898 13899 13900 13901 13902 13903 13904 13905 13906 13907 13908 13909 13910 13911 13912 13913 13914 13915 13916 13917 13918 13919 13920 13921 13922 13923 13924 13925 13926 13927 13928 13929 13930 13931 13932 13933 13934 13935 13936 13937 13938 13939 13940 13941 13942 13943 13944 13945 13946 13947 13948 13949 13950 13951 13952 13953 13954 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13983 13984 13985 13986 13987 13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13998 13999 14000 14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025 14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101 14102 14103 14104 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114 14115 14116 14117 14118 14119 14120 14121 14122 14123 14124 14125 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 14150 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222 14223 14224 14225 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273 14274 14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 14316 14317 14318 14319 14320 14321 14322 14323 14324 14325 14326 14327 14328 14329 14330 14331 14332 14333 14334 14335 14336 14337 14338 14339 14340 14341 14342 14343 14344 14345 14346 14347 14348 14349 14350 14351 14352 14353 14354 14355 14356 14357 14358 14359 14360 14361 14362 14363 14364 14365 14366 14367 14368 14369 14370 14371 14372 14373 14374 14375 14376 14377 14378 14379 14380 14381 14382 14383 14384 14385 14386 14387 14388 14389 14390 14391 14392 14393 14394 14395 14396 14397 14398 14399 14400 14401 14402 14403 14404 14405 14406 14407 14408 14409 14410 14411 14412 14413 14414 14415 14416 14417 14418 14419 14420 14421 14422 14423 14424 14425 14426 14427 14428 14429 14430 14431 14432 14433 14434 14435 14436 14437 14438 14439 14440 14441 14442 14443 14444 14445 14446 14447 14448 14449 14450 14451 14452 14453 14454 14455 14456 14457 14458 14459 14460 14461 14462 14463 14464 14465 14466 14467 14468 14469 14470 14471 14472 14473 14474 14475 14476 14477 14478 14479 14480 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592 14593 14594 14595 14596 14597 14598 14599 14600 14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14623 14624 14625 14626 14627 14628 14629 14630 14631 14632 14633 14634 14635 14636 14637 14638 14639 14640 14641 14642 14643 14644 14645 14646 14647 14648 14649 14650 14651 14652 14653 14654 14655 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681 14682 14683 14684 14685 14686 14687 14688 14689 14690 14691 14692 14693 14694 14695 14696 14697 14698 14699 14700 14701 14702 14703 14704 14705 14706 14707 14708 14709 14710 14711 14712 14713 14714 14715 14716 14717 14718 14719 14720 14721 14722 14723 14724 14725 14726 14727 14728 14729 14730 14731 14732 14733 14734 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746 14747 14748 14749 14750 14751 14752 14753 14754 14755 14756 14757 14758 14759 14760 14761 14762 14763 14764 14765 14766 14767 14768 14769 14770 14771 14772 14773 14774 14775 14776 14777 14778 14779 14780 14781 14782 14783 14784 14785 14786 14787 14788 14789 14790 14791 14792 14793 14794 14795 14796 14797 14798 14799 14800 14801 14802 14803 14804 14805 14806 14807 14808 14809 14810 14811 14812 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14823 14824 14825 14826 14827 14828 14829 14830 14831 14832 14833 14834 14835 14836 14837 14838 14839 14840 14841 14842 14843 14844 14845 14846 14847 14848 14849 14850 14851 14852 14853 14854 14855 14856 14857 14858 14859 14860 14861 14862 14863 14864 14865 14866 14867 14868 14869 14870 14871 14872 14873 14874 14875 14876 14877 14878 14879 14880 14881 14882 14883 14884 14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902 14903 14904 14905 14906 14907 14908 14909 14910 14911 14912 14913 14914 14915 14916 14917 14918 14919 14920 14921 14922 14923 14924 14925 14926 14927 14928 14929 14930 14931 14932 14933 14934 14935 14936 14937 14938 14939 14940 14941 14942 14943 14944 14945 14946 14947 14948 14949 14950 14951 14952 14953 14954 14955 14956 14957 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973 14974 14975 14976 14977 14978 14979 14980 14981 14982 14983 14984 14985 14986 14987 14988 14989 14990 14991 14992 14993 14994 14995 14996 14997 14998 14999 15000 15001 15002 15003 15004 15005 15006 15007 15008 15009 15010 15011 15012 15013 15014 15015 15016 15017 15018 15019 15020 15021 15022 15023 15024 15025 15026 15027 15028 15029 15030 15031 15032 15033 15034 15035 15036 15037 15038 15039 15040 15041 15042 15043 15044 15045 15046 15047 15048 15049 15050 15051 15052 15053 15054 15055 15056 15057 15058 15059 15060 15061 15062 15063 15064 15065 15066 15067 15068 15069 15070 15071 15072 15073 15074 15075 15076 15077 15078 15079 15080 15081 15082 15083 15084 15085 15086 15087 15088 15089 15090 15091 15092 15093 15094 15095 15096 15097 15098 15099 15100 15101 15102 15103 15104 15105 15106 15107 15108 15109 15110 15111 15112 15113 15114 15115 15116 15117 15118 15119 15120 15121 15122 15123 15124 15125 15126 15127 15128 15129 15130 15131 15132 15133 15134 15135 15136 15137 15138 15139 15140 15141 15142 15143 15144 15145 15146 15147 15148 15149 15150 15151 15152 15153 15154 15155 15156 15157 15158 15159 15160 15161 15162 15163 15164 15165 15166 15167 15168 15169 15170 15171 15172 15173 15174 15175 15176 15177 15178 15179 15180 15181 15182 15183 15184 15185 15186 15187 15188 15189 15190 15191 15192 15193 15194 15195 15196 15197 15198 15199 15200 15201 15202 15203 15204 15205 15206 15207 15208 15209 15210 15211 15212 15213 15214 15215 15216 15217 15218 15219 15220 15221 15222 15223 15224 15225 15226 15227 15228 15229 15230 15231 15232 15233 15234 15235 15236 15237 15238 15239 15240 15241 15242 15243 15244 15245 15246 15247 15248 15249 15250 15251 15252 15253 15254 15255 15256 15257 15258 15259 15260 15261 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 15284 15285 15286 15287 15288 15289 15290 15291 15292 15293 15294 15295 15296 15297 15298 15299 15300 15301 15302 15303 15304 15305 15306 15307 15308 15309 15310 15311 15312 15313 15314 15315 15316 15317 15318 15319 15320 15321 15322 15323 15324 15325 15326 15327 15328 15329 15330 15331 15332 15333 15334 15335 15336 15337 15338 15339 15340 15341 15342 15343 15344 15345 15346 15347 15348 15349 15350 15351 15352 15353 15354 15355 15356 15357 15358 15359 15360 15361 15362 15363 15364 15365 15366 15367 15368 15369 15370 15371 15372 15373 15374 15375 15376 15377 15378 15379 15380 15381 15382 15383 15384 15385 15386 15387 15388 15389 15390 15391 15392 15393 15394 15395 15396 15397 15398 15399 15400 15401 15402 15403 15404 15405 15406 15407 15408 15409 15410 15411 15412 15413 15414 15415 15416 15417 15418 15419 15420 15421 15422 15423 15424 15425 15426 15427 15428 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 15440 15441 15442 15443 15444 15445 15446 15447 15448 15449 15450 15451 15452 15453 15454 15455 15456 15457 15458 15459 15460 15461 15462 15463 15464 15465 15466 15467 15468 15469 15470 15471 15472 15473 15474 15475 15476 15477 15478 15479 15480 15481 15482 15483 15484 15485 15486 15487 15488 15489 15490 15491 15492 15493 15494 15495 15496 15497 15498 15499 15500 15501 15502 15503 15504 15505 15506 15507 15508 15509 15510 15511 15512 15513 15514 15515 15516 15517 15518 15519 15520 15521 15522 15523 15524 15525 15526 15527 15528 15529 15530 15531 15532 15533 15534 15535 15536 15537 15538 15539 15540 15541 15542 15543 15544 15545 15546 15547 15548 15549 15550 15551 15552 15553 15554 15555 15556 15557 15558 15559 15560 15561 15562 15563 15564 15565 15566 15567 15568 15569 15570 15571 15572 15573 15574 15575 15576 15577 15578 15579 15580 15581 15582 15583 15584 15585 15586 15587 15588 15589 15590 15591 15592 15593 15594 15595 15596 15597 15598 15599 15600 15601 15602 15603 15604 15605 15606 15607 15608 15609 15610 15611 15612 15613 15614 15615 15616 15617 15618 15619 15620 15621 15622 15623 15624 15625 15626 15627 15628 15629 15630 15631 15632 15633 15634 15635 15636 15637 15638 15639 15640 15641 15642 15643 15644 15645 15646 15647 15648 15649 15650 15651 15652 15653 15654 15655 15656 15657 15658 15659 15660 15661 15662 15663 15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15684 15685 15686 15687 15688 15689 15690 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703 15704 15705 15706 15707 15708 15709 15710 15711 15712 15713 15714 15715 15716 15717 15718 15719 15720 15721 15722 15723 15724 15725 15726 15727 15728 15729 15730 15731 15732 15733 15734 15735 15736 15737 15738 15739 15740 15741 15742 15743 15744 15745 15746 15747 15748 15749 15750 15751 15752 15753 15754 15755 15756 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773 15774 15775 15776 15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796 15797 15798 15799 15800 15801 15802 15803 15804 15805 15806 15807 15808 15809 15810 15811 15812 15813 15814 15815 15816 15817 15818 15819 15820 15821 15822 15823 15824 15825 15826 15827 15828 15829 15830 15831 15832 15833 15834 15835 15836 15837 15838 15839 15840 15841 15842 15843 15844 15845 15846 15847 15848 15849 15850 15851 15852 15853 15854 15855 15856 15857 15858 15859 15860 15861 15862 15863 15864 15865 15866 15867 15868 15869 15870 15871 15872 15873 15874 15875 15876 15877 15878 15879 15880 15881 15882 15883 15884 15885 15886 15887 15888 15889 15890 15891 15892 15893 15894 15895 15896 15897 15898 15899 15900 15901 15902 15903 15904 15905 15906 15907 15908 15909 15910 15911 15912 15913 15914 15915 15916 15917 15918 15919 15920 15921 15922 15923 15924 15925 15926 15927 15928 15929 15930 15931 15932 15933 15934 15935 15936 15937 15938 15939 15940 15941 15942 15943 15944 15945 15946 15947 15948 15949 15950 15951 15952 15953 15954 15955 15956 15957 15958 15959 15960 15961 15962 15963 15964 15965 15966 15967 15968 15969 15970 15971 15972 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984 15985 15986 15987 15988 15989 15990 15991 15992 15993 15994 15995 15996 15997 15998 15999 16000 16001 16002 16003 16004 16005 16006 16007 16008 16009 16010 16011 16012 16013 16014 16015 16016 16017 16018 16019 16020 16021 16022 16023 16024 16025 16026 16027 16028 16029 16030 16031 16032 16033 16034 16035 16036 16037 16038 16039 16040 16041 16042 16043 16044 16045 16046 16047 16048 16049 16050 16051 16052 16053 16054 16055 16056 16057 16058 16059 16060 16061 16062 16063 16064 16065 16066 16067 16068 16069 16070 16071 16072 16073 16074 16075 16076 16077 16078 16079 16080 16081 16082 16083 16084 16085 16086 16087 16088 16089 16090 16091 16092 16093 16094 16095 16096 16097 16098 16099 16100 16101 16102 16103 16104 16105 16106 16107 16108 16109 16110 16111 16112 16113 16114 16115 16116 16117 16118 16119 16120 16121 16122 16123 16124 16125 16126 16127 16128 16129 16130 16131 16132 16133 16134 16135 16136 16137 16138 16139 16140 16141 16142 16143 16144 16145 16146 16147 16148 16149 16150 16151 16152 16153 16154 16155 16156 16157 16158 16159 16160 16161 16162 16163 16164 16165 16166 16167 16168 16169 16170 16171 16172 16173 16174 16175 16176 16177 16178 16179 16180 16181 16182 16183 16184 16185 16186 16187 16188 16189 16190 16191 16192 16193 16194 16195 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 16220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16237 16238 16239 16240 16241 16242 16243 16244 16245 16246 16247 16248 16249 16250 16251 16252 16253 16254 16255 16256 16257 16258 16259 16260 16261 16262 16263 16264 16265 16266 16267 16268 16269 16270 16271 16272 16273 16274 16275 16276 16277 16278 16279 16280 16281 16282 16283 16284 16285 16286 16287 16288 16289 16290 16291 16292 16293 16294 16295 16296 16297 16298 16299 16300 16301 16302 16303 16304 16305 16306 16307 16308 16309 16310 16311 16312 16313 16314 16315 16316 16317 16318 16319 16320 16321 16322 16323 16324 16325 16326 16327 16328 16329 16330 16331 16332 16333 16334 16335 16336 16337 16338 16339 16340 16341 16342 16343 16344 16345 16346 16347 16348 16349 16350 16351 16352 16353 16354 16355 16356 16357 16358 16359 16360 16361 16362 16363 16364 16365 16366 16367 16368 16369 16370 16371 16372 16373 16374 16375 16376 16377 16378 16379 16380 16381 16382 16383 16384 16385 16386 16387 16388 16389 16390 16391 16392 16393 16394 16395 16396 16397 16398 16399 16400 16401 16402 16403 16404 16405 16406 16407 16408 16409 16410 16411 16412 16413 16414 16415 16416 16417 16418 16419 16420 16421 16422 16423 16424 16425 16426 16427 16428 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 16440 16441 16442 16443 16444 16445 16446 16447 16448 16449 16450 16451 16452 16453 16454 16455 16456 16457 16458 16459 16460 16461 16462 16463 16464 16465 16466 16467 16468 16469 16470 16471 16472 16473 16474 16475 16476 16477 16478 16479 16480 16481 16482 16483 16484 16485 16486 16487 16488 16489 16490 16491 16492 16493 16494 16495 16496 16497 16498 16499 16500 16501 16502 16503 16504 16505 16506 16507 16508 16509 16510 16511 16512 16513 16514 16515 16516 16517 16518 16519 16520 16521 16522 16523 16524 16525 16526 16527 16528 16529 16530 16531 16532 16533 16534 16535 16536 16537 16538 16539 16540 16541 16542 16543 16544 16545 16546 16547 16548 16549 16550 16551 16552 16553 16554 16555 16556 16557 16558 16559 16560 16561 16562 16563 16564 16565 16566 16567 16568 16569 16570 16571 16572 16573 16574 16575 16576 16577 16578 16579 16580 16581 16582 16583 16584 16585 16586 16587 16588 16589 16590 16591 16592 16593 16594 16595 16596 16597 16598 16599 16600 16601 16602 16603 16604 16605 16606 16607 16608 16609 16610 16611 16612 16613 16614 16615 16616 16617 16618 16619 16620 16621 16622 16623 16624 16625 16626 16627 16628 16629 16630 16631 16632 16633 16634 16635 16636 16637 16638 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380
# Drak X
# Copyright (C) 2002 MandrakeSoft
#
# NOTE: use UTF-8 only
#
# prabu <prabu_anand2000@yahoo.com>
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX 1.0\n"
"POT-Creation-Date: 2002-12-05 19:52+0100\n"
"PO-Revision-Date: 2002-09-06 00:35+0800\n"
"Last-Translator: prabu anand <prabu_anand2000@yahoo.com>\n"
"Language-Team: Tamil <tamilinix@yahoogroups.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"

#: ../../any.pm:1
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"நீங்கள் பின்னர் \"fileshare\". \n"
"என்ற குழுவிற்கு பயனரை டிரேக்பயனர் மூலம் எளிதாகச் சேர்க்கலாம்"

#: ../../any.pm:1 ../../bootlook.pm:1 ../../install_steps_gtk.pm:1
#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
#: ../../standalone/drakbackup:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
#: ../../standalone/drakgw:1 ../../standalone/draksec:1
#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
#, c-format
msgid "Cancel"
msgstr "தவிர்"

#: ../../any.pm:1
#, c-format
msgid "Launch userdrake"
msgstr "டிரேக்பயனரை துவக்கு"

#: ../../any.pm:1
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"நீங்கள் உங்கள் பயனர்களை தத்தம் அடைவுகளை எளிதாக பகிர்ந்து கொள்ள\n"
"விரும்புகிறீர்களா? இதன் மூலம் பயனர்கள் கான்கொரர், நாடிலஸ் ஆகியவற்றில் \"பகிர்\" என்பதைத் "
"தேர்வுச் செய்ய முடியும் .\n"
"\n"
"\"தனிப்பயனாக்கம்\" மூலம் ஒவ்வொரு பயனருக்கும் தனித்தனியாக அனுமதி அளித்தல்.\n"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "Mandatory package %s is missing"
msgstr "கட்டாயமாக இருக்க வேண்டியப் பொதி %s இல்ைல"

#: ../../any.pm:1
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
"நீங்கள் சம்பா, NFS மூலம் ஏற்றுமதி செய்யலாம். உங்களுக்கு தேவையானதைத் தேர்வுச் செய்யவும்"

#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். இதை நிறுவ வேண்டுமா?"

#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Custom"
msgstr "தனிப்பயனாக்கம்"

#: ../../any.pm:1
#, c-format
msgid "Allow all users"
msgstr "அனைத்து பயனரையும் அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "No sharing"
msgstr "பகிர்தல் கிடையாது"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "More"
msgstr "மேலும்"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "உங்கள் பயன்பாட்டிற்கு உள்ள விசைப்பலகைகள் அனைத்தும் இங்கே கொடுக்கப்பட்டுள்ளன"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள்"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Country"
msgstr "நாடு"

#: ../../any.pm:1
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "All"
msgstr "அனைத்து"

#: ../../any.pm:1
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"மாண்ட்ரேக் லினக்ஸில் பல மொழிகளை பயன்படுத்தலாம்\n"
"நீங்கள் நிறுவ விரும்பும் மொழியைத் தேர்வுச் செய்க\n"
"நீங்கள் நிறுவி முடித்தவுடன் உங்களுக்கு அவை கிடைக்கும்"

#: ../../any.pm:1
#, c-format
msgid "Please choose a language to use."
msgstr "நீங்கள் பயன்படுத்த விரும்பும் மொழியைத் தேர்வுச் செய்யவும்"

#: ../../any.pm:1
#, c-format
msgid "Choose the window manager to run:"
msgstr "பயன்படுத்த விரும்பும் சாளர மேலாளரைத் தேர்வுச் செய்யவும்"

#: ../../any.pm:1
#, c-format
msgid "Choose the default user:"
msgstr "கொடாநிலை பயனரைத் தேர்வுச் செய்யவும்"

#: ../../any.pm:1
#, c-format
msgid "Do you want to use this feature?"
msgstr "நீங்கள் இந்த வசதியை பயன்படுத்த விரும்புகிறீர்களா?"

#: ../../any.pm:1
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "என்னால் உங்கள் கணினியை தன்னியக்கமாக பயனர் பயன்படுத்தும் வகையில் அமைக்க முடியும்"

#: ../../any.pm:1
#, c-format
msgid "Autologin"
msgstr "தன்னியக்கநுழைவு"

#: ../../any.pm:1
#, c-format
msgid "Icon"
msgstr "குறும்படம்"

#: ../../any.pm:1
#, c-format
msgid "Shell"
msgstr "ஓடு"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Password (again)"
msgstr "கடவுச்ெசால் (மீண்டும்)"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
#: ../../standalone/drakconnect:1
#, c-format
msgid "Password"
msgstr "கடவுச்ெசால்"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "User name"
msgstr "பயனர் பெயர்"

#: ../../any.pm:1
#, c-format
msgid "Real name"
msgstr "உன்ைமயான பெயர்"

#: ../../any.pm:1
#, c-format
msgid "Accept user"
msgstr "பயனரை ஏற்றுக்ெகாள்"

#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Done"
msgstr "முடிந்தது"

#: ../../any.pm:1
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"பயனர் பெயரை உள்ளிடவும்\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid "Add user"
msgstr "பயனரைச் சேர்"

#: ../../any.pm:1
#, c-format
msgid "This user name has already been added"
msgstr "இந்தப் பயனர் பெயர் ஏற்கனவே சேர்க்கப்பட்டுவிட்டது"

#: ../../any.pm:1
#, c-format
msgid "The user name is too long"
msgstr "பயனர் பெயர் மிக நீளமாக உள்ளது"

#: ../../any.pm:1
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "பயனர் பெயரில் சிறிய எழுத்துக்கள், எண்கள் `-' `_' மட்டுமே இருக்கலாம்"

#: ../../any.pm:1
#, c-format
msgid "Please give a user name"
msgstr "பயனருக்கு ஓர் பெயர் கொடுக்கவும்"

#: ../../any.pm:1
#, c-format
msgid "This password is too simple"
msgstr "இந்த கடவுச்ெசால் மிக எளிதாக உள்ளது"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Please try again"
msgstr "மீண்டும் முயற்சித்து பார்க்கவும்"

#: ../../any.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "The passwords do not match"
msgstr "கடவுச்ெசாற்கள் இரண்டும் பொருந்தவில்ைல"

#: ../../any.pm:1
#, c-format
msgid "(already added %s)"
msgstr "(%s ஏற்கனவே சேர்க்கப்பட்டுவிட்டது)"

#: ../../any.pm:1
#, c-format
msgid "access to compilation tools"
msgstr "உருவாக்கக் கருவிகளுக்கான அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "access to network tools"
msgstr "வலையமைப்புக் கருவிகளுக்கு அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "access to administrative files"
msgstr "நிர்வாக கோப்புகளுக்கு அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "allow \"su\""
msgstr "\"su\" நிர்வாகியாக மாறும் கட்டளையை அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "access to rpm tools"
msgstr "rpmபொதிக் கருவிகளுக்கான அனுமதி"

#: ../../any.pm:1
#, c-format
msgid "access to X programs"
msgstr "X நிரல்களுக்கான அனுமதி"

#: ../../any.pm:1
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"உங்கள் தொடங்கல்பட்டியில் உள்ள உருப்படிகள் இதோ உள்ளது\n"
"இதை நீங்கள் விருப்பம் போல் மாற்றியமைக்கலாம்"

#: ../../any.pm:1
#, c-format
msgid "Other OS (windows...)"
msgstr "மற்ற இயங்கு தளம்(வின்டோஸ்...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (MacOS...)"
msgstr "மற்ற இயங்கு தளம்(மேக்...)"

#: ../../any.pm:1
#, c-format
msgid "Other OS (SunOS...)"
msgstr "மற்ற இயங்கு தளம்(சன்...)"

#: ../../any.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Linux"
msgstr "லினக்ஸ்"

#: ../../any.pm:1
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "நீங்கள் எந்த வகையான நுழைவை சேர்க்க போகிறீர்கள்?"

#: ../../any.pm:1
#, c-format
msgid "This label is already used"
msgstr "இந்த தலைப்பு ஏற்கனவே பயன்பாட்டில் உள்ளது"

#: ../../any.pm:1
#, c-format
msgid "You must specify a root partition"
msgstr "நீங்கள் நிச்சயம் ஒரு மூல வகிரை குறிப்பிட வேண்டும்"

#: ../../any.pm:1
#, c-format
msgid "You must specify a kernel image"
msgstr "நீங்கள் நிச்சயம் ஒரு கரு உருவை குறிப்பிட வேண்டும்"

#: ../../any.pm:1
#, c-format
msgid "Empty label not allowed"
msgstr "வெற்றுத் தலைப்புகளுக்கு அனுமதியில்ைல"

#: ../../any.pm:1 ../../harddrake/v4l.pm:1
#, c-format
msgid "Default"
msgstr "கொடாநிலை"

#: ../../any.pm:1
#, c-format
msgid "NoVideo"
msgstr "ஒளித்ேதாற்றம் இல்ைல"

#: ../../any.pm:1
#, c-format
msgid "Initrd-size"
msgstr "தொடங்கலுருவின் அளவு"

#: ../../any.pm:1
#, c-format
msgid "Append"
msgstr "பின் சேர்"

#: ../../any.pm:1
#, c-format
msgid "Label"
msgstr "தலைப்பு"

#: ../../any.pm:1
#, c-format
msgid "Unsafe"
msgstr "பாதுகாப்பில்லாதது"

#: ../../any.pm:1
#, c-format
msgid "Table"
msgstr "அட்டவணை"

#: ../../any.pm:1
#, c-format
msgid "Root"
msgstr "மூலம்"

#: ../../any.pm:1
#, c-format
msgid "Read-write"
msgstr "எழுத-படிக்க"

#: ../../any.pm:1
#, c-format
msgid "Initrd"
msgstr "தொடங்கலுருவம்"

#: ../../any.pm:1
#, c-format
msgid "Video mode"
msgstr "ஒளித்ேதாற்ற முறைமை"

#: ../../any.pm:1
#, c-format
msgid "Image"
msgstr "உருவம்"

#: ../../any.pm:1
#, c-format
msgid "Default OS?"
msgstr "கொடாநிலை இயங்கு தளம்?"

#: ../../any.pm:1
#, c-format
msgid "Enable OF Boot?"
msgstr "ஒபன்பர்ம்வேர்-ல்  இருந்து தொடங்கலாமா?"

#: ../../any.pm:1
#, c-format
msgid "Enable CD Boot?"
msgstr "சிடியில் இருந்து தொடங்கலாமா?"

#: ../../any.pm:1
#, c-format
msgid "Kernel Boot Timeout"
msgstr "கரு தொடங்கல் வெளியேற்ற நேரம்"

#: ../../any.pm:1
#, c-format
msgid "Open Firmware Delay"
msgstr "ஒபன்பர்ம்வேர் தாமதம்"

#: ../../any.pm:1
#, c-format
msgid "Boot device"
msgstr "துவங்கு சாதனம்"

#: ../../any.pm:1
#, c-format
msgid "Init Message"
msgstr "முதல் செய்தி"

#: ../../any.pm:1
#, c-format
msgid "Bootloader to use"
msgstr "பயன்படுத்த வேண்டிய துவங்குநிரல்"

#: ../../any.pm:1
#, c-format
msgid "Bootloader main options"
msgstr "துவங்குநிரலின் முக்கிய விருப்பத்ேதர்வுகள்"

#: ../../any.pm:1
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"விருப்பத்ேதர்வு ``Restrict command line options''  என்பது கடவுச்ெசால் இல்ைலயென்றால் "
"பயனற்றது"

#: ../../any.pm:1
#, c-format
msgid "Give the ram size in MB"
msgstr "சரியான நினைவகத்ைத மெகாபைட்டில் தெரிவிக்கவும்"

#: ../../any.pm:1
#, c-format
msgid "Enable multiple profiles"
msgstr "பல பயனர் குறிப்புகளை செயல்படுத்து"

#: ../../any.pm:1
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "சரியான நினைவகத்ைத தெரிவிக்கவும்(கண்டுள்ள அளவு %d MB)"

#: ../../any.pm:1
#, c-format
msgid "Clean /tmp at each boot"
msgstr "/tmp அடைவை ஒவ்வொரு முறைத் துவங்கும்போதும் துடைத்து விடு"

#: ../../any.pm:1
#, c-format
msgid "Create a bootdisk"
msgstr "துவங்குதட்ைட உருவாக்குங்கள்"

#: ../../any.pm:1
#, c-format
msgid "restrict"
msgstr "கட்டுபடுத்து"

#: ../../any.pm:1
#, c-format
msgid "Restrict command line options"
msgstr "உரைவழியில் பயன்படுத்தக்கூடிய விருப்பத்ேதர்வுகளைக் கட்டுபடுத்து"

#: ../../any.pm:1
#, c-format
msgid "Delay before booting default image"
msgstr "கொடாநிலை உருவம் துவங்குவதற்கான தாமதம்"

#: ../../any.pm:1
#, c-format
msgid "compact"
msgstr "நெருக்கமாக"

#: ../../any.pm:1
#, c-format
msgid "Compact"
msgstr "நெருக்கமாக"

#: ../../any.pm:1
#, c-format
msgid "Bootloader installation"
msgstr "துவங்குநிரல் நிறுவல்"

#: ../../any.pm:1
#, c-format
msgid "First sector of boot partition"
msgstr "துவங்குவகிர்தலின் முதல் வில்ைல"

#: ../../any.pm:1
#, c-format
msgid "First sector of drive (MBR)"
msgstr "வன்தட்டின் முதல் வில்ைல "

#: ../../any.pm:1
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "உங்கள் துவங்குநிரலை எங்கு நிறுவ விரும்புகிறீர்கள்?"

#: ../../any.pm:1
#, c-format
msgid "LILO/grub Installation"
msgstr "லிலோ/கிரப் நிறுவல்"

#: ../../any.pm:1
#, c-format
msgid "SILO Installation"
msgstr "சிலோ நிறுவல்"

#: ../../any.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Skip"
msgstr "தவிர்"

#: ../../any.pm:1
#, fuzzy, c-format
msgid "On Floppy"
msgstr "நெகிழ்வட்டில்"

#: ../../any.pm:1
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"நீங்கள் துவங்குநிரலை ஓர் வகிரில் நிறுவுகிறீர்கள்\n"
"உங்கள் வன்வட்டின் துவக்கத்தில் ஓர் துவங்குநிரல் இருப்பது இதற்கு பொதுவான காரனம்.\n"
"\n"
"நீங்கள் எந்த வன்வட்டில் இருந்து துவங்க விரும்புகிறீர்கள்?"

#: ../../any.pm:1
#, c-format
msgid "Creating bootdisk..."
msgstr "துவங்குவட்ைட உருவாக்குங்கள்"

#: ../../any.pm:1
#, c-format
msgid "Insert a floppy in %s"
msgstr " %s ல் நெகிழ்வட்ைட உள்ளிடவும்"

#: ../../any.pm:1
#, c-format
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr " துவங்குவட்ைட உருவாக்க நெகிழ்வட்டு இயக்கியை தேர்வுச் செய்யுங்கள்"

#: ../../any.pm:1
#, c-format
msgid "Second floppy drive"
msgstr "இரண்டாவது நெகிழ்வட்டு இயக்கி"

#: ../../any.pm:1
#, c-format
msgid "First floppy drive"
msgstr "முதல் நெகிழ்வட்டு இயக்கி"

#: ../../any.pm:1
#, c-format
msgid "Sorry, no floppy drive available"
msgstr "மன்னிக்கவும்,  நெகிழ்வட்டு இயக்கி ஏதுமில்ைல"

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"இப்ேபாது நீங்கள் தனிப்பயன் தொடங்குவட்ைட உருவாக்கலாம்.\n"
"இது எப்ேபாதாவது நீங்கள் உங்கள் கணினியின் தொடங்கு நிரல்\n"
"பழுதாக்கி விட்டால் இதன் மூலம் கணினியை துவக்கலாம்\n"
"இதை வைத்து அநேகமாக அனைத்து துவக்க பிரச்சினைகளையும்\n"
"சரி செய்ய முடியும்\n"
"நீங்கள் ஒரு தனிப்பயன் தொடங்குவட்ைட உருவாக்க விரும்புகிறீர்களா\n"
"%s"

#: ../../any.pm:1
#, c-format
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""
"\n"
"\n"
"(எச்சரிக்ைக! நீங்கள் XFS கோப்பமைப்ைப உங்கள் மூல வகிற்றில் பயன்படுத்துகிறீர்கள்\n"
"இதன் இயக்கநிரல் மிகப்ெபரியது.அதனால் 1.44 மெகாபைட் நெகிழ்வட்டு பயன்படாது)."

#: ../../any.pm:1
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."

#: ../../bootloader.pm:1
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "%s இந்த வகிர் உங்கள் துவங்குநிரலை ஏற்றுக் கொள்ளாது\n"

#: ../../bootloader.pm:1
#, c-format
msgid "not enough room in /boot"
msgstr "/boot அடைவில் போதிய இடமில்ைல"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "The highlighted entry will be booted automatically in %d seconds."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "commands before booting, or 'c' for a command-line."
msgstr "commands before booting, or 'c' for a command-line"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Press enter to boot the selected OS, 'e' to edit the"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr "Use the %c and %c keys for selecting which entry is highlighted"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm:1
#, c-format
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Welcome to GRUB the operating system chooser!"

#: ../../bootloader.pm:1
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: ../../bootloader.pm:1
#, c-format
msgid "Grub"
msgstr "கிரப்"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with text menu"
msgstr "உரைவழி லிலோ"

#: ../../bootloader.pm:1
#, c-format
msgid "LILO with graphical menu"
msgstr "வரைவியல்வழி லிலோ"

#: ../../bootloader.pm:1
#, c-format
msgid "SILO"
msgstr "சிலோ"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm:1
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait %d seconds for default boot.\n"
"\n"

#: ../../bootlook.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakconnect:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "OK"
msgstr "சரி"

#: ../../bootlook.pm:1
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "ஆம், எனக்கு தன்னியக்க நுழைவு(பயனர்,மேசையமைப்பு) வேண்டும்"

#: ../../bootlook.pm:1
#, c-format
msgid "No, I don't want autologin"
msgstr "இல்ைல, எனக்கு தன்னியக்க நுழைவு வேண்டாம்"

#: ../../bootlook.pm:1
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "இயக்கத் தொடக்கத்தில் வரைவியல்வழி முறைமைக்குச் செல்லவும்"

#: ../../bootlook.pm:1
#, c-format
msgid "System mode"
msgstr "இயக்க முறைமை"

#: ../../bootlook.pm:1
#, c-format
msgid "Bootsplash"
msgstr "தொடங்குத்திரை"

#: ../../bootlook.pm:1
#, c-format
msgid "Lilo screen"
msgstr "லிலோ திரை"

#: ../../bootlook.pm:1
#, c-format
msgid ""
"\n"
"Select the theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separately"
msgstr ""
"\n"
"லிலோ மற்றும் தொடங்குத்திரைக்கு\n"
"உருகருக்களை தேர்வு செய்,\n"
"இரண்ைடயும் தனியாகவும் தேர்வு\n"
"செய்யலாம்"

#: ../../bootlook.pm:1
#, c-format
msgid "Themes"
msgstr "உருகரு"

#: ../../bootlook.pm:1
#, c-format
msgid "Splash selection"
msgstr "தொடங்குத்திரை தேர்வு"

#: ../../bootlook.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakgw:1
#, c-format
msgid "Configure"
msgstr "வடிவமை"

#: ../../bootlook.pm:1
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"நீங்கள் தற்போது %s தொடங்குதல் மேலாளராக பயன்படுத்துகிறீர்கள்\n"
"அமைப்பு மாயாவியை துவக்க வடிவமை என்ற பொத்தானை கிளிக் செய்"

#: ../../bootlook.pm:1
#, c-format
msgid "LiLo and Bootsplash themes installation successfull"
msgstr "லிலோ, தொடங்குபட உருகருக்கள் நிறுவுதல் வெற்றியடைந்தது"

#: ../../bootlook.pm:1
#, c-format
msgid "Theme installation failed!"
msgstr "உருகருக்கள் நிறுவுதல் வெற்றியடையவில்ைல"

#: ../../bootlook.pm:1 ../../standalone/draksplash:1
#, c-format
msgid "Notice"
msgstr "குறிப்பு"

#: ../../bootlook.pm:1 ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
#: ../../standalone/draksplash:1
#, c-format
msgid "Error"
msgstr "பிழை"

#: ../../bootlook.pm:1
#, c-format
msgid "Relaunch 'lilo'"
msgstr "லிலோவை மீண்டும் துவக்கு"

#: ../../bootlook.pm:1
#, c-format
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""
"லிலோவை மீண்டும் துவக்க முடியவில்ைல\n"
"\"லிலோ\" என்ற கட்டளையை நிர்வாகியாக மாறிக் கொடு"

#: ../../bootlook.pm:1
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr "'mkinitrd -f /boot/initrd-%s.img %s'.துவங்குநிரலுருவத்ைத உருவாக்கு"

#: ../../bootlook.pm:1
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr "mkinitrd -f /boot/initrd-%s.img %s என்பதை துவக்க முடியவில்ைல"

#: ../../bootlook.pm:1
#, c-format
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""
"/etc/sysconfig/bootsplash என்ற கோப்பில் எழுத  முடியவில்ைல\n"
"கோப்ேபா காண முடியவில்ைல"

#: ../../bootlook.pm:1
#, c-format
msgid "Write %s"
msgstr "%s எழுது"

#: ../../bootlook.pm:1
#, c-format
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr "/etc/sysconfig/bootsplash.என்ற கோப்பில் எழுத முடியவில்ைல"

#: ../../bootlook.pm:1
#, c-format
msgid "Lilo message not found"
msgstr "லிலோ தகவலை காண முடியவில்ைல"

#: ../../bootlook.pm:1
#, c-format
msgid "Copy %s to %s"
msgstr "%s என்பதை  %s என நகலெடு"

#: ../../bootlook.pm:1
#, c-format
msgid "Backup %s to %s.old"
msgstr "%s என்பதை  %s.old என காப்ெபடு"

#: ../../bootlook.pm:1
#, c-format
msgid "Create new theme"
msgstr "உருகரு ஒன்றை உருவாக்கு "

#: ../../bootlook.pm:1
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"உருகருக்களை முனையத்தில்\n"
"காட்டு"

#: ../../bootlook.pm:1
#, c-format
msgid "Install themes"
msgstr "உருகருக்களை நிறுவுங்கள்"

#: ../../bootlook.pm:1
#, c-format
msgid "Lilo/grub mode"
msgstr "லிலோ/க்ரப் முறைமை"

#: ../../bootlook.pm:1
#, c-format
msgid "Yaboot mode"
msgstr "யாதொடக்க முறைமை"

#: ../../bootlook.pm:1
#, c-format
msgid "Launch Aurora at boot time"
msgstr "அரோரவை துவங்கலின் போது துவக்கிவிடு"

#: ../../bootlook.pm:1
#, c-format
msgid "Traditional Gtk+ Monitor"
msgstr "பழைய Gtk+ முகப்பு"

#: ../../bootlook.pm:1
#, c-format
msgid "Traditional Monitor"
msgstr "பழைய  முகப்பு"

#: ../../bootlook.pm:1
#, c-format
msgid "NewStyle Monitor"
msgstr "புதிய முகப்பு"

#: ../../bootlook.pm:1
#, c-format
msgid "NewStyle Categorizing Monitor"
msgstr "புதிய வகைப்படுத்தப்பட்ட முகப்பு"

#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
#: ../../standalone/logdrake:1
#, c-format
msgid "/File/_Quit"
msgstr "/கோப்பு/_வெளிச்செல்"

#: ../../bootlook.pm:1 ../../standalone/drakfloppy:1
#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
#, c-format
msgid "/_File"
msgstr "/_கோப்பு"

#: ../../bootlook.pm:1
#, c-format
msgid "Boot Style Configuration"
msgstr "தொடங்கல் பாந்த வடிவமைப்பு"

#: ../../common.pm:1
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper இல்ைல"

#: ../../common.pm:1
#, c-format
msgid "kdesu missing"
msgstr "kdesu இல்ைல"

#: ../../common.pm:1
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "நிறுவி முடித்தவுடன் திரைவேட்டுகள் %s என்ற அடைவில் கிடைக்கும்"

#: ../../common.pm:1
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "வகிர்தல் முடிவதற்கு முன் திரைவேட்டு எடுக்க முடியாது"

#: ../../common.pm:1
#, c-format
msgid "%d seconds"
msgstr "%d விநாடிகள்"

#: ../../common.pm:1
#, c-format
msgid "1 minute"
msgstr "1 நிமிடம்"

#: ../../common.pm:1
#, c-format
msgid "%d minutes"
msgstr "%d நிமிடங்கள்"

#: ../../common.pm:1
#, c-format
msgid "TB"
msgstr "டெராபைட்"

#: ../../common.pm:1
#, c-format
msgid "GB"
msgstr "கிகாபைட் "

#: ../../common.pm:1
#, c-format
msgid "MB"
msgstr "மெகாபட்"

#: ../../common.pm:1
#, c-format
msgid "KB"
msgstr "கிலோபைட்"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United States"
msgstr "அமெரிக்கா"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Austria"
msgstr "ஆஸ்திரியா"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#: ../../standalone/drakxtv:1
#, c-format
msgid "Italy"
msgstr "இத்தாலி"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Netherlands"
msgstr "நெதர்லாந்து"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Sweden"
msgstr "சுவிடன்"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Norway"
msgstr "நார்ேவ"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Greece"
msgstr "கிரிஸ்"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Germany"
msgstr "ெஜர்மனி"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Czech Republic"
msgstr "செக் குடியரசு"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Belgium"
msgstr "பெல்ஜியம்"

#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "France"
msgstr "பிரான்சு"

#: ../../crypto.pm:1 ../../lang.pm:1
#, c-format
msgid "Costa Rica"
msgstr "கோஸ்டா ரிகா"

#: ../../fsedit.pm:1
#, c-format
msgid "Error opening %s for writing: %s"
msgstr " %s இதை திறக்க முடியவில்ைல,%s இதை எழுதுவதற்காக திறக்க வேண்டும்"

#: ../../fsedit.pm:1
#, c-format
msgid "Nothing to do"
msgstr "ஒன்றும் செய்வதற்கில்ைல"

#: ../../fsedit.pm:1
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "தன்னியக்கமாக அளிக்க போதிய இடமில்ைல"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "மறைக்குறியீடு செய்யப்பட்ட கோப்பமைப்புக்கு %s ஏற்றப்புள்ளியை பயன்படுத்த முடியாது"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"நீங்கள் இதனை ஏற்ற  (ext2/ext3, reiserfs, xfs, or jfs) போன்ற கோப்பமைப்பு தேவை\n"

#: ../../fsedit.pm:1
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "இந்த அடைவு மூல கோப்பமைப்பில் இருக்க வேண்டும்"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "%s என்ற ஏற்றப் புள்ளியில் LVM வகிர் ஆகையால் ஏற்ற முடியாது"

#: ../../fsedit.pm:1
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr " %s என்ற ஏற்றப் புள்ளியுடன் ஏற்கனவே வகிர் ஒன்று உள்ளது\n"

#: ../../fsedit.pm:1
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "ஏற்றப் புள்ளிகள்  / உடன் மட்டும் தான் தொடங்க வேண்டும்"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "ReiserFS  வகையை  32மெகா பைட்டுக்கு குறைவான வகிற்றில் பயன்படுத்த முடியாது"

#: ../../fsedit.pm:1
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "JFS வகையை  16மெகா பைட்டுக்கு குறைவான வகிற்றில் பயன்படுத்த முடியாது"

#: ../../fsedit.pm:1
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"உங்கள் வகிர் அமைப்பு %s குழப்பமாக உள்ளது.\n"
"%s என்ற பிழை நேர்ந்துள்ளது\n"
"\n"
"உங்கள் வன் வட்டில் உள்ள அனைத்து விவரங்களையும் இழக்க சம்மதமா?\n"

#: ../../fsedit.pm:1
#, c-format
msgid "server"
msgstr "பரிமாறி"

#: ../../fsedit.pm:1
#, c-format
msgid "with /usr"
msgstr "/usr உடன்"

#: ../../fsedit.pm:1
#, c-format
msgid "simple"
msgstr "எளிய"

#: ../../fs.pm:1
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "%s வகிர் வடிவூட்டப்படுகிறது"

#: ../../fs.pm:1 ../../partition_table.pm:1
#, c-format
msgid "error unmounting %s: %s"
msgstr "இறக்குவதில் பிழை நேர்ந்துள்ளது %s: %s"

#: ../../fs.pm:1
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "%s வகிர்  %s அடைவில் ஏற்றுவதில் பிழை நேர்ந்துள்ளது"

#: ../../fs.pm:1
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "%s வகிர் வடிவூட்டப்படுகிறது"

#: ../../fs.pm:1
#, fuzzy, c-format
msgid "Checking %s"
msgstr "%s நகலெடுக்கபடுகிறது"

#: ../../fs.pm:1
#, c-format
msgid "Formatting partition %s"
msgstr "%s வகிர் வடிவூட்டப்படுகிறது"

#: ../../fs.pm:1
#, c-format
msgid "Creating and formatting file %s"
msgstr "%s என்ற கோப்பு உருவாக்கப்பட்டு வடிவூட்டபடுகின்றன"

#: ../../fs.pm:1
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "%s இந்த %s வகையில் வடிவூட்டுவது எப்படி என எனக்கு தெரியாது"

#: ../../fs.pm:1
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s போல்  %s வடிவூட்டியது முடியவில்ைல"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Click on \"Next ->\" if you want to delete all data and partitions present\n"
"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
"be able to recover any data and partitions present on this hard drive,\n"
"including any Windows data.\n"
"\n"
"Click on \"<- Previous\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Click on \"OK\" if you want to delete all "
"data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to cancel this operation without losing any data and\n"
"partitions present on this hard drive."

#: ../../help.pm:1
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""
"உங்கள் கணினியில் மாண்ட்ரேக் லினக்ஸ் இயக்க அமைப்ேபா மட்டும்\n"
"இயக்க முடிவெடுத்தால் இவ்வுகப்பத்ைதத் தேர்ந்ெதடுக்கவும். இதனால்\n"
"உங்களின் வன்வட்டு முழுவதுமுள்ள தரவுகள், வகிர்வுகள் எல்லாம்\n"
"அழிந்துவிடும். அவைகளைத் திரும்பிப் பெற இயலாது. ஆகவே,\n"
"எச்சரிக்ைகயாகச் செயல்பட வேண்டும்."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
"or all of the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary.\n"
"\n"
" * \"Country\": check the current country selection. If you are not in this\n"
"country, click on the button and choose another one.\n"
"\n"
" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
"primary language you have chosen. But here, just as in your choice of a\n"
"keyboard, you may not be in the country for which the chosen language\n"
"should correspond. You may need to click on the \"Timezone\" button to\n"
"configure the clock for the correct timezone.\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
"click that button. This should be reserved to advanced users.\n"
"\n"
" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
"interface in \"800x600\" resolution. If that does not suits you, click on\n"
"the button to reconfigure your grapical interface.\n"
"\n"
" * \"Network\": If you want to configure your Internet or local network\n"
"access now, you can by clicking on this button.\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. If you have a TV card and it is not detected, click on the button to\n"
"try to configure it manually.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on the button to change the parameters\n"
"associated with the card."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Here are presented various parameters "
"concerning your machine. Depending on\n"
"your installed hardware, you may - or not, see the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary;\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary;\n"
"\n"
" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in;\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard;\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it is\n"
"displayed here. No modification possible at installation time;\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
"here. No modification possible at installation time;\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
"displayed here. You can click on the button to change the parameters\n"
"associated with it."

#: ../../help.pm:1
#, c-format
msgid ""
"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver."
msgstr ""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Be careful to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Yaboot is a bootloader for NewWorld MacIntosh "
"hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful to\n"
"choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt;\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information;\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt;\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt;\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. You can add additional entries for yaboot, "
"either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot\n"
"prompt to select this boot option;\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension;\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation;\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used;\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"Here, you can override this option;\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support;\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
"selections."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX will ask you if you have\n"
"a PCI SCSI installed. Clicking \" Yes\" will display a list of SCSI cards\n"
"to choose from. Click \"No\" if you know that you have no SCSI hardware in\n"
"your machine. If you're not sure, you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info \" and clicking\n"
"the \"Next ->\". Examine the list of hardware and then click on the \"Next\n"
"->\" button to return to the SCSI interface question.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. DrakX now detects any IDE device present in "
"your computer. It will also\n"
"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection does not always detect a piece of hardware,\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
"detected in your machine by selecting \"See hardware info\" and clicking\n"
"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
"return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options which the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options which need to be passed, you\n"
"will need to provide options to the driver manually. Please review the\n"
"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
"Hardware'' section) for hints on retrieving the parameters required from\n"
"hardware documentation, from the manufacturer's web site (if you have\n"
"Internet access) or from Microsoft Windows (if you used this hardware with\n"
"Windows on your system)."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
"is best for a particular type of configuration.\n"
"\n"
" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
"\" will handle only very simple network cases and is somewhat slow when\n"
"used with networks.) It's recommended that you use \"pdq \" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it compatible with older operating systems\n"
"that may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Here, we select a printing system for your "
"computer. Other OSs may offer\n"
"you one, but Mandrake Linux offers three.\n"
"\n"
" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
"a direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have networked printers. It will handle only\n"
"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
"after installation by running PrinterDrake from the Mandrake Control Center\n"
"and clicking the expert button.\n"
"\n"
" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
"your local printer and also halfway-around the planet. It is simple and can\n"
"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options.\n"
"\n"
" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
"approximately the same things the others can do, but it will print to\n"
"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
"and it can print directly to shell commands. If you have need of Novell or\n"
"printing to commands without using a separate pipe construct, use lprNG.\n"
"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
"networks."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or another\n"
"OS.\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader.\n"
"\n"
"\"Boot device\": in most cases, you will not change the default (\"First\n"
"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
"(\"On Floppy\").\n"
"\n"
"Checking \"Create a boot disk\" allows you to have a rescue bot media\n"
"handy.\n"
"\n"
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
"least two situations where having a boot floppy is critical:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
"your system). If at some point you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector and remove your ability to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
"fair number of system tools for restoring a system that has crashed due to\n"
"a power failure, an unfortunate typing error, a forgotten root password, or\n"
"any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
"floppy disk must be blank or have non-critical data on it - DrakX will\n"
"format the floppy and will rewrite the whole disk."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை .The Mandrake Linux CD-ROM has a built-in "
"rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
"your changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. LILO (the LInux LOader) and grub are "
"bootloaders: they are able to boot\n"
"either GNU/Linux or any other operating system present on your computer.\n"
"Normally, these other operating systems are correctly detected and\n"
"installed. If this is not the case, you can add an entry by hand in this\n"
"screen. Be careful to choose the correct parameters.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This dialog allows to finely tune your bootloader:\n"
"\n"
" * \"Bootloader to use\": there are three choices for your bootloader:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": after a boot or a reboot of\n"
"the computer, this is the delay given to the user at the console to select\n"
"a boot entry other than the default.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you do before changing any of the options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
"that are reserved for the expert user."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. .ILO and grub are GNU/Linux bootloaders. This "
"stage, normally, is totally\n"
"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds here:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
"OS;\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Bootloader to use\": you have three choices:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu).\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface.\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose - in the bootloader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also, be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved to the expert user.\n"
"\n"
"After you have configured the general bootloader parameters, the list of\n"
"boot options which will be available at boot time will be displayed.\n"
"\n"
"If there is another operating system installed on your machine, it will\n"
"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
"the existing options. Select an entry and click \"Modify\" to modify or\n"
"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
"installation step."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password that you chose too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against. GNU/Linux is as prone to operator error as any other operating\n"
"system. Since \"root\" can overcome all limitations and unintentionally\n"
"erase all data on partitions by carelessly accessing the partitions\n"
"themselves, it is important that it be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it too\n"
"easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, clisk the \"Advanced\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one as \"authentication\". If you do not\n"
"know which to use, ask your network administrator.\n"
"\n"
"If you happen to have problems with reminding passwords, you can choose to\n"
"have \"No password\", if your computer won't be connected to the Internet,\n"
"and if you trust anybody having access to it."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. This is the most crucial decision point for "
"the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"root\" is the system\n"
"administrator and is the only one authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
"choose not to enter a password, but we strongly advise you against this if\n"
"only for one reason: do not think that because you booted GNU/Linux that\n"
"your other operating systems are safe from mistakes. Since \"root\" can\n"
"overcome all limitations and unintentionally erase all data on partitions\n"
"by carelessly accessing the partitions themselves, it is important for it\n"
"to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password - it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"In Expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
"network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."

#: ../../help.pm:1
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.Please select the correct port. For example, "
"the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux.. "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
"the buttons and check that the mouse pointer moves on-screen as you move\n"
"your mouse."
msgstr ""
"DrakX generally detects the number of buttons your mouse has. If not, it\n"
"assumes you have a two-button mouse and will set it up for third-button\n"
"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
"USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse select the appropriate\n"
"type from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct. If the mouse is not working well, press the space bar or [Return]\n"
"to \"Cancel\" and choose again.உதவி இன்னமும் மொழிபெயர்கப்படவில்லை."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation, thereby installing the\n"
"language-specific files for system documentation and applications. For\n"
"example, if you will host users from Spain on your machine, select English\n"
"as the default language in the tree view and \"Espanol\" in the Advanced\n"
"section.\n"
"\n"
"Note that you're not limited to choosing a single additional language. Once\n"
"you have selected additional locales, click the \"Next ->\" button to\n"
"continue.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you will host users from Spain on your\n"
"machine, select English as the main language in the tree view and in the\n"
"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales, click the \"OK\" button to continue.உதவி இன்னமும் "
"மொழிபெயர்கப்படவில்லை. "

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Depending on the default language you chose in Section , DrakX will\n"
"automatically select a particular type of keyboard configuration. However,\n"
"you might not have a keyboard that corresponds exactly to your language:\n"
"for example, if you are an English speaking Swiss person, you may have a\n"
"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
"find yourself in the same situation where your native language and keyboard\n"
"do not match. In either case, this installation step will allow you to\n"
"select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"More \" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen) and you won't even see this step. However, you\n"
"might not have a keyboard that corresponds exactly to your language: for\n"
"example, if you are an English speaking Swiss person, you may still want\n"
"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
"located in Quebec, you may find yourself in the same situation. In both\n"
"cases, you will have to go back to this installation step and select an\n"
"appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards.உதவி இன்னமும் மொழிபெயர்கப்படவில்லை."

#: ../../help.pm:1
#, c-format
msgid ""
"This step is activated only if an old GNU/Linux partition has been found on\n"
"your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"Install\": For the most part, this completely wipes out the old\n"
"system. If you wish to change how your hard drives are partitioned, or\n"
"change the file system, you should use this option. However, depending on\n"
"your partitioning scheme, you can prevent some of your existing data from\n"
"being over- written.\n"
"\n"
" * \"Upgrade\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"\"Country\": check the current country selection. If you are not in this\n"
"country, click on the button and choose another one."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.More than one Microsoft partition has been "
"detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive\n"
"\n"
" * \"Auto allocate\": this option enables you to automatically create ext3\n"
"and swap partitions in free space of your hard drive\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery, if necessary. It is strongly\n"
"recommended that you perform this step.\n"
"\n"
" * \"Restore partition table\": allows you to restore a previously saved\n"
"partition table from a floppy disk.\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"doesn't always work.\n"
"\n"
" * \"Reload partition table\": discards all changes and reloads the\n"
"partition table that was originally on the hard drive.\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good\n"
"understanding of partitioning.\n"
"\n"
" * \"Undo\": use this option to cancel your changes.\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information about the\n"
"hard drive.\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, you need to choose which "
"partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive;\n"
"\n"
" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
"and swap partitions in free space of your hard drive;\n"
"\n"
" * \"More\": gives access to additional features:\n"
"\n"
"    * \"Save partition table\": saves the partition table to a floppy.\n"
"Useful for later partition-table recovery if necessary. It is strongly\n"
"recommended to perform this step;\n"
"\n"
"    * \"Restore partition table\": allows to restore a previously saved\n"
"partition table from floppy disk;\n"
"\n"
"    * \"Rescue partition table\": if your partition table is damaged, you\n"
"can try to recover it using this option. Please be careful and remember\n"
"that it can fail;\n"
"\n"
"    * \"Reload partition table\": discards all changes and loads your\n"
"initial partition table;\n"
"\n"
"    * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning;\n"
"\n"
" * \"Undo\": use this option to cancel your changes;\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information;\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the ext2fs chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use. Refer to the \"msec\"\n"
"chapter of the ``Command Line Manual'' to get more information about the\n"
"meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, it is time to choose the "
"security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expense of\n"
"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
"to get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Bugs may have been\n"
"fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Choose\n"
"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
"to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. A package-selection tree will\n"
"appear: review the selection, and press \"Install\" to retrieve and install\n"
"the selected package( s), or \"Cancel\" to abort."
msgstr ""
"உங்கள் மான்டிரேக் லினக்ஸ் இயக்க நிரல் வெளியீட்டிற்கும் \n"
"இன்றைய தினத்திற்கும் இடையில் நிறைய புதிய பொதிகள் வெளிவந்து\n"
"இருக்கலாம். இவை உங்கள் கணிணியில் நிறுவப்பட்டுள்ள பொதிகளின்\n"
"பாதுகாப்பு குறைபாடுகளையும், பிழைகளையும் நீக்க இவை தேவைப்படலாம்\n"
"இவை இணையத்தில் தரவு இறக்கம் செய்ய வேண்டும். இப்போது இணையத்துடன் \n"
"இணைப்பு இருந்தால் நீங்கள் இவற்றை இறக்கி நிறுவலாம். நீங்கள் தொலைபேசி\n"
"முலம் இணைந்திருந்தால் இதற்கு நீண்ட நேரம் ஆகலாம்\n"
"பொதிகளை நிறுவ \"ஆம்\" எனவும், நிறுவ விருப்பம் இல்லையென்றால்  \"இல்லை\" \n"
"எனவும் தேர்வு செய்யவும்.\n"
"\n"
"பொதிகளை நிறுவ \"ஆம்\" என தேர்வு செய்தால் உங்களுக்கு பல இணையதளங்களின்\n"
"முகவரி காட்டப்படும். உங்களுக்கு அருகில் உள்ள தளத்திலிருந்து இறக்க அதனை\n"
"தேர்வு செய்யவும். பின் \"நிறுவு\" என்றால் பொதிகள் நிறுவப்படும். இல்லையென்றால்\n"
"\"நீக்கு\" எனச் சொல்லி வெளியேறவும்"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"Next ->\" when you are ready to format partitions.\n"
"\n"
"Click on \"<- Previous\" if you want to choose another partition for your\n"
"new Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Any partitions that have been newly defined "
"must be formatted for use\n"
"(formatting means creating a filesystem).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"any of it.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
"you should see after your computer has finished doing its hardware tests is\n"
"the bootloader menu, giving you the choice of which operating system to\n"
"start.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"that will automatically perform a whole installation without the help of an\n"
"operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation. The\n"
"partitioning step is the only interactive procedure.\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"Save packages selection\"(*): saves a list of the package selected in\n"
"this installation. To use this selection with another installation, insert\n"
"the floppy and start the installation. At the prompt, press the [F1] key\n"
"and type >>linux defcfg=\"floppy\" <<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.There you are. Installation is now complete "
"and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation as the\n"
"partitioning step (and only this one) remains interactive;\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section on our web site;\n"
"\n"
" * \"Save packages selection\"(*): saves the package selection as done\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the drive and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"Use free space\": this option will perform an automatic partitioning\n"
"of your blank drive(s). If you use this option there will be no further\n"
"prompts.\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated with\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and for the most part it's a good idea to keep them.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see `` Erase entire disk'' solution)\n"
"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
"without the loss of any data, provided you previously defragment the\n"
"Windows partition and that it uses the FAT format. Backing up your data is\n"
"strongly recommended.. Using this option is recommended if you want to use\n"
"both Mandrake Linux and Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful, because you will not be able to\n"
"undo your choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Custom disk partitionning\": choose this option if you want to\n"
"manually partition your hard drive. Be careful -- it is a powerful but\n"
"dangerous choice and you can very easily lose all your data. That's why\n"
"this option is really only recommended if you have done something like this\n"
"before and have some experience. For more instructions on how to use the\n"
"DiskDrake utility, refer to the ``Managing Your Partitions '' section in\n"
"the ``Starter Guide''."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.At this point, you need to choose where you "
"want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space, you will\n"
"need to partition it. Basically, partitioning a hard drive consists of\n"
"logically dividing it to create space to install your new Mandrake Linux\n"
"system.\n"
"\n"
"Because the partitioning process' effects are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the installation in Expert mode, you will enter\n"
"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
"From the installation interface, you can use the wizards as described here\n"
"by clicking the dialog's \"Wizard\" button.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available:\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further;\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option;\n"
"\n"
" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
"is installed on your hard drive and takes all the space available on it,\n"
"you have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data, provided you previously\n"
"defragment the Windows partition. Backing up your data won't hurt either..\n"
"This solution is recommended if you want to use both Mandrake Linux and\n"
"Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than at the present time. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software;\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after you confirm;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Checking \"Create a boot disk\" allows you to have a rescue bot media\n"
"handy.\n"
"\n"
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting the CD-ROM, pressing the >> F1<< key at boot and typing >>rescue<<\n"
"at the prompt. If your computer cannot boot from the CD-ROM, there are at\n"
"least two situations where having a boot floppy is critical:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows on\n"
"your system). If at some point you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector and remove your ability to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start GNU/Linux from the hard disk,\n"
"this floppy will be the only means of starting up GNU/Linux. It contains a\n"
"fair number of system tools for restoring a system that has crashed due to\n"
"a power failure, an unfortunate typing error, a forgotten root password, or\n"
"any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to insert a disk in the drive. The\n"
"floppy disk must be blank or have non-critical data on it - DrakX will\n"
"format the floppy and will rewrite the whole disk."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை .The Mandrake Linux CD-ROM has a built-in "
"rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
"of your main disk (unless you are using another boot manager), to allow you\n"
"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
"your system). If you need to reinstall Windows, the Microsoft install\n"
"process will rewrite the boot sector, and then you will not be able to\n"
"start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"When you click on this step, you will be asked to enter a disk inside the\n"
"drive. The floppy disk you will insert must be empty or contain data which\n"
"you do not need. You will not have to format it since DrakX will rewrite\n"
"the whole disk."

#: ../../help.pm:1
#, c-format
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்ைல.Finally, you will be asked whether you want to "
"see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."

#: ../../help.pm:1
#, c-format
msgid ""
"In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). Asample of the chosen\n"
"configuration is shown in the monitor."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented the list of different parameters to change to get an\n"
"optimal graphical display: Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"monitor connected to your machine. If it is not the case, you can choose in\n"
"this list the monitor you actually own.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   You can choose here resolutions and color depth between those available\n"
"for your hardware. Choose the one that best suit your needs (you will be\n"
"able to change that after installation though). Asample of the chosen\n"
"configuration is shown in the monitor.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"Yes\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the autodetected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   You can here choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"No\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: ../../help.pm:1
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer can normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose in this list the card you actually own.\n"
"\n"
"   In the case that different servers are available for your card, with or\n"
"without 3D acceleration, you are then proposed to choose the server that\n"
"best suits your needs."
msgstr ""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
"system clock and the hardware clock are in the same timezone. This is\n"
"useful when the machine also hosts another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization \" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. For this\n"
"feature to work, you must have a working Internet connection. It is best to\n"
"choose a time server located near you. This option actually installs a time\n"
"server that can used by other machines on your local network."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.GNU/Linux manages time in GMT (Greenwich Mean "
"Time) and translates it in\n"
"local time according to the time zone you selected. It is however possible\n"
"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
"hardware clock is the same as the system clock. This is useful when the\n"
"machine is hosting another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization\" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. In the\n"
"list that is presented, choose a server located near you. Of course you\n"
"must have a working Internet connection for this feature to work. It will\n"
"actually install on your machine a time server which can be optionally used\n"
"by other machines on your local network."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"This step is used to choose which services you wish to start at boot time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not always needed at\n"
"boot time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.You may now choose which services you wish to "
"start at boot time.\n"
"\n"
"Here are presented all the services available with the current\n"
"installation. Review them carefully and uncheck those which are not always\n"
"needed at boot time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services which you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"

#: ../../help.pm:1
#, c-format
msgid ""
"\"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation."
msgstr ""

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"Next\n"
"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
"also choose not to configure the network, or to do it later, in which case\n"
"clicking the \"Cancel\" button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
"simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.You are now proposed to set up your Internet/"
"network connection. If you\n"
"wish to connect your computer to the Internet or to a local network, click\n"
"\"OK\". The autodetection of network devices and modem will be launched. If\n"
"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
"may also choose not to configure the network, or do it later; in that case,\n"
"simply click the \"Cancel\" button.\n"
"\n"
"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the ``User Guide'' chapter about Internet connections for\n"
"details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation, or if you\n"
"are finished configuring your network connection, click \"Cancel\"."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
"which appears whenever the installer automatically selects a package to\n"
"resolve a dependency issue. Some packages have relationships between each\n"
"other such that installation of a package requires that some other program\n"
"is already installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Finally, depending on whether or not you "
"selected individual packages, you\n"
"will be presented a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. An estimate of the time it will take to\n"
"install everything is displayed on the screen, to help you gauge if there\n"
"is sufficient time to enjoy a cup of coffee.\n"
"\n"
"!! If a server package has been selected, either intentionally or because\n"
"it was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows to load the\n"
"package list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of last step on how to create such\n"
"a floppy."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux has four predefined installations available. You\n"
"can think of these installation classes as containers for various packages.\n"
"You can mix and match applications from the various containers, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' container installed.\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the applications that are in the workstation\n"
"container.\n"
"\n"
" * \"Development\": if plan on using your machine for programming, choose\n"
"the appropriate packages from the container.\n"
"\n"
" * \"Server\": if your machine is intended to be a server, select which of\n"
"the more common services you wish to install on your machine.\n"
"\n"
" * \"Graphical Environment\": this is where you will choose your preferred\n"
"graphical environment. At least one must be selected if you want to have a\n"
"graphical interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server.\n"
"\n"
" * \"Truly minimal install\": will install the absolute minimum number of\n"
"packages necessary to get a working Linux system. With this installation\n"
"you will only have a command line interface. The total size of this\n"
"installation is 65 megabytes.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.It is now time to specify which programs you "
"wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from a CD-ROM, you will first\n"
"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the corresponding groups;\n"
"\n"
" * \"Development\": if your machine is to be used for programming, choose\n"
"the desired group(s);\n"
"\n"
" * \"Server\": if your machine is intended to be a server, you will be able\n"
"to select which of the most common services you wish to install on your\n"
"machine;\n"
"\n"
" * \"Graphical Environment\": finally, this is where you will choose your\n"
"preferred graphical environment. At least one must be selected if you want\n"
"to have a graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you deselect all groups when performing a regular\n"
"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the fewer packages possible to have a working\n"
"graphical desktop;\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server;\n"
"\n"
" * \"Truly minimal install\": will install the strict minimum necessary to\n"
"get a working Linux system, in command line only. This installation is\n"
"about 65Mb large.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM so it will eject\n"
"the current CD and ask you to insert the correct CD as required."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.The Mandrake Linux installation is spread out "
"over several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM and will eject the\n"
"current CD and ask you to insert a different one as required"

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Here are Listed the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.Listed above are the existing Linux partitions "
"detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installations. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a partition for \"/home\"\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user can have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", which is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configuration, protecting the system from unintentional or malicious\n"
"changes that impact the system as a whole. You will have to create at least\n"
"one regular user for yourself -- this is the account which you should use\n"
"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
"to do anything and everything, it may also be very dangerous! A mistake\n"
"could mean that your system would not work any more. If you make a serious\n"
"mistake as a regular user, the worst that will happen is that you will lose\n"
"some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in and copy it to the \"User name\" field, which is the name this\n"
"user will enter to log onto the system. If you like, you may override the\n"
"default and change the username. The next step is to enter a password. From\n"
"a security point of view, a non-privileged (regular) user password is not\n"
"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
"making it blank or too simple: after all, your files could be the ones at\n"
"risk.\n"
"\n"
"Once you click on \"Accept user\", you can add other users. Add a user for\n"
"each one of your friends: your father or your sister, for example. Click\n"
"\"Next ->\" when you have finished adding users.\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default).\n"
"\n"
"When you are finished adding all users, you will be asked to choose a user\n"
"that can automatically log into the system when the computer boots up. If\n"
"you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"Next\n"
"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
"to use this feature?\" box."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை.GNU/Linux is a multiuser system, and this "
"means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more. But unlike \"root\", which is the administrator, the users\n"
"you will add here will not be entitled to change anything except their own\n"
"files and their own configuration. You will have to create at least one\n"
"regular user for yourself. That account is where you should log in for\n"
"routine use. Although it is very practical to log in as \"root\" everyday,\n"
"it may also be very dangerous! The slightest mistake could mean that your\n"
"system would not work any more. If you make a serious mistake as a regular\n"
"user, you may only lose some information, but not the entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course -\n"
"as you can actually enter whatever you want. DrakX will then take the first\n"
"word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log onto the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
"from a security point of view, but that is no reason to neglect it: after\n"
"all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of your friends: your father or your sister, for\n"
"example. When you finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default)."

#: ../../help.pm:1
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
"computer."
msgstr ""
"உதவி இன்னமும் மொழிபெயர்கப்படவில்லை. Before continuing, you should read carefully "
"the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms in it, click on the \"Refuse\" button which will immediately\n"
"terminate the installation. To continue with the installation, click on the\n"
"\"Accept\" button."

#: ../../install2.pm:1
#, c-format
msgid "You must also format %s"
msgstr "நீங்கள் %s இதனையும் வடிவுட்ட வேண்டும்"

#: ../../install2.pm:1
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"உங்கள் கருவிற்கு இணையான கூறுகளை காணமுடியவில்ைல (%s கோப்ேபா கானவில்ைல), இதற்கு அர்த்தம் "
"நீங்கள் தவறான நிறுவுதட்ைட பயன்படுத்துகிறீர்கள் (தயவுசெய்து புதிய நிறுவுதட்ைட "
"உருவாக்குங்கள்)"

#: ../../install_any.pm:1
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr "பிழை நேர்ந்துள்ளது -உங்கள் வன்பொருளைச் சோதிக்கவும்"

#: ../../install_any.pm:1 ../../partition_table.pm:1
#, c-format
msgid "Error reading file %s"
msgstr "%s என்ற கோப்ேபா படிப்பதில் பிழை நேர்ந்துள்ளது"

#: ../../install_any.pm:1
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"நீங்கள் தற்போது நிறுவிய பொதித் தேர்வுகளுடன் வேறு கணினிகளில் நிறுவ, நிறுவல் தொடங்கும் "
"போது ``linux defcfg=floppy'' என உள்ளீடு செய்யவும்"

#: ../../install_any.pm:1
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "FAT கோப்பமைப்பில் வடிவூட்டப்பட்டவில்ைல"

#: ../../install_any.pm:1
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "FAT கோப்பமைப்பில் வடிவூட்டப்பட்ட நெகிழ்தட்ைட %s யின் உள்ளே போடவும்"

#: ../../install_any.pm:1
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "NIS களத்தில் பரப்ப முடியாது"

#: ../../install_any.pm:1
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
#, c-format
msgid "No"
msgstr "இல்ைல"

#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
#, c-format
msgid "Yes"
msgstr "ஆம்"

#: ../../install_any.pm:1
#, fuzzy, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"நீங்கள் கீழ்கானும் பரிமாற்று நிரல்களை தேரவு செய்து உள்ளீர்கள்: %s\n"
"\n"
"\n"
"இந்த பரிமாறிகள் கொடாநிலையாக துவக்கப்படும். இவற்றில் இவை: \n"
"வெளியிடப் பட்டபோது பாதுகாப்பு பிரச்சினை ஏதுமில்ைல. ஆனால் பின்னாளில்:\n"
"கண்டுபிடிக்கப்படலாம்.\n"
"அப்ேபாது அவற்றுக்கான மாற்றுப் பொதிகளை நிறுவவும்\n"
"\n"
"\n"
"நிங்கள் நிச்சயம் இவற்றை நிறுவ விரும்புகிறீர்களா?\n"

#: ../../install_gtk.pm:1
#, fuzzy, c-format
msgid "System configuration"
msgstr "அறிவிப்பாளரின் வடிவமைப்பு "

#: ../../install_gtk.pm:1
#, fuzzy, c-format
msgid "System installation"
msgstr "சிலோ நிறுவல்"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing down the network"
msgstr "வலையமைப்பாக்கங்கள் முடக்கப்படுகிறது"

#: ../../install_interactive.pm:1
#, c-format
msgid "Bringing up the network"
msgstr "வலையமைப்பாக்கங்கள் ஏற்றப்படுகிறது"

#: ../../install_interactive.pm:1
#, c-format
msgid "Partitioning failed: %s"
msgstr "வகிர்தலில் பிழை நேர்ந்துள்ளது: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "டிரேக்X மாயாவி உங்களுக்கு இந்த பதில்களை கொடுக்கிறது"

#: ../../install_interactive.pm:1
#, c-format
msgid "I can't find any room for installing"
msgstr "நிறுவுவதற்கு வகிற்றில் போதிய இடமில்ைல"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"இப்ேபாது நீங்கள் இந்த %s வட்ைட வகிர்தல் வேண்டும்.\n"
"முடிந்தவுடன் , `w' என்ழதன் மூலம் சேமிப்பதை மறந்து விடாதே"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use fdisk"
msgstr "fdisk-ஐ பயன்படுத்து"

#: ../../install_interactive.pm:1
#, c-format
msgid "Custom disk partitioning"
msgstr "வகிர்தலை தனிப்பயனாக்கு"

#: ../../install_interactive.pm:1
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr " %s வட்டில் உள்ள அனைத்து வகிரும் அதில் உள்ள அனைத்து தகவல்களும் அழிக்கப்பட்டுவிடும்"

#: ../../install_interactive.pm:1
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "உங்களிடம் ஒன்றுக்கு மேற்ப்பட்ட வன் வட்டு உள்ளது, எதில் லினக்ைஸ நிறுவ வேண்டும்?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Erase entire disk"
msgstr "முழு வட்ைடயும் அழித்து விடு"

#: ../../install_interactive.pm:1
#, c-format
msgid "Remove Windows(TM)"
msgstr "வின்டோைஸ நீக்கி விடு"

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "அளவை மாற்றுவதற்கு அல்லது கண்ணியாக்க  FAT வகிர் ஏதுமில்ைல, "

#: ../../install_interactive.pm:1
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT அளவு  மாற்றியமைக்கப்டுவதில் பிழை நேர்ந்துள்ளது: %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Resizing Windows partition"
msgstr "வின்டோஸ் வகிற்றின் அளவு  மாற்றியமைக்கப்படுகிறது"

#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resizing"
msgstr "மாற்றியமைக்கப்படுகிறது"

#: ../../install_interactive.pm:1
#, c-format
msgid "partition %s"
msgstr "வகிற்றில் %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "வின்டோஸ அளவு எவ்வளவு பெரிதாக இருக்க வேண்டும் இந்த "

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"எச்சரிக்ைக!\n"
"\n"
"டிரேக்X இப்ேபாது வின்டோஸ் வகிற்றின் அளவை  மாற்றியமைக்கப் போகிறது:\n"
"இது மிகவும் ஆபத்தானது. நீங்கள் நிச்சயம் வின்டோஸில் scandisk நிரலை \n"
"இயக்கியிருக்க வேண்டும் \n"
"மேலும் உங்களுக்கு தேவையான தகவல்களை காப்பு எடுத்துக் கொள்ளவும்\n"
"இவையனைத்தும் சரியாக இருந்தால் சரி என தேர்வுச் செய்யவும்"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""
"வின்டோஸ் வகிர் மிகவும் துண்டாக்கப்பட்டுள்ளது. தயவுசெய்து நீங்கள் கணினியை வின்டோஸில் தொடங்கி  "
"``defrag'' என்ற கருவியை இயக்கவும். பின்னர் மீண்டும் இங்கு வந்து மாண்ட்ரேக் நிறுவலைத் "
"தொடரவும்"

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "வின்டோஸ் வகிற்றில் உள்ள காலியிடத்ைத பயன்படுத்து"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"வின்டோஸ் வகிற்றின் அளவு  மாற்றியமைக்கப்பதில் , \n"
"இந்த பிழை நேர்ந்துள்ளது மன்னிக்கவும்  %s"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to resize?"
msgstr "நீங்கள் எந்த வகிற்றின் அளவை மாற்றியமைக்க போகிறீர்கள்?"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "வின்டோஸ் வகிற்றில் உள்ள காலியிடத்ைத பயன்படுத்து"

#: ../../install_interactive.pm:1
#, fuzzy, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "அளவை மாற்றுவதற்கு அல்லது கண்ணியாக்க  FAT வகிர் ஏதுமில்ைல, "

#: ../../install_interactive.pm:1
#, c-format
msgid "Swap partition size in MB: "
msgstr "மெகா பைட்டில் இடமாற்று வகிர் அளவு : "

#: ../../install_interactive.pm:1
#, c-format
msgid "Root partition size in MB: "
msgstr "மெகா பைட்டில் மூல வகிர் அளவு : "

#: ../../install_interactive.pm:1
#, c-format
msgid "Choose the sizes"
msgstr "அளவை தேர்வுச் செய்யவும்"

#: ../../install_interactive.pm:1
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "Use the Windows partition for loopback"
msgstr ""

#: ../../install_interactive.pm:1
#, c-format
msgid "There is no existing partition to use"
msgstr "பயன்படுத்த வகிர்களை ஏதுமில்ைல"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use existing partitions"
msgstr "இருக்கும் வகிர்களை பயன்படுத்துங்கள்"

#: ../../install_interactive.pm:1
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "போதுமான காலியிடம் இல்ைல"

#: ../../install_interactive.pm:1
#, c-format
msgid "Use free space"
msgstr "காலியாக உள்ள  இடத்ைத பயன்படுத்து"

#: ../../install_interactive.pm:1 ../../install_steps.pm:1
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "FAT வடிவூட்டப்பட்ட வகிர் /boot/efi என்ற இடத்தில் ஏற்றப்பட வேண்டும்"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"உங்களிடம்  இடமாற்று வகிர் இல்ைல.\n"
"\n"
"அப்படியே தொடரலாமா?"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr "உங்களிடம் நிச்சயம் ஒரு மூல வகிர் இருக்க வேண்டும்"

#: ../../install_interactive.pm:1
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"உங்கள் கணினியில் உள்ள சில வன்பொருட்களின் இயக்க நிரலை\n"
"நீங்கள்   %s இங்கிருந்து எடுக்கலாம்"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"வாழ்த்துக்கள், நிறுவுதல் வெற்றிகரமாக முடிந்தது\n"
"நிறுவல்வட்ைடயும், நிறுவல் சிடியையும் வெளியெ எடுத்துவிட்டு மறுதொடக்கம் செய்யவும்.\n"
"\n"
"\n"
"உங்கள் மாண்ட்ரேக் லின பற்றிய கடைசி தகவல்களுக்கு \n"
"பிழையறிவிப்ேபா பார்க்கவும் \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"தயவுசெய்து உங்கள் கணினியை வடிவமைக்க மாண்ட்ரேக் உதவிநூல்களை \n"
"படிக்கவும்"

#: ../../install_messages.pm:1
#, fuzzy, c-format
msgid "http://www.mandrakelinux.com/en/91errata.php3"
msgstr "http://www.mandrakelinux.com/en/90errata.php3"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"எச்சரிக்ைக\n"
"\n"
"பின்வரும் விவரங்களை கவனமாக படிக்கவும். இதில் உங்களுக்கு\n"
"உடன்பாடு இல்ைலயென்றால் அடுத்து வரும்\n"
"சிடியை நிறுவ கூடாது\n"
"\n"
"\n"
"அடுத்து வரும் சிடியில் சில நிரல்கள் GPL உரிமைப்படி இல்ைல\n"

#: ../../install_messages.pm:1
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""
"அனுமதி ஒப்பந்தம் -தைரியமாக ஒப்புக்ெகாள்ளலாம்Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"

#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
#, c-format
msgid "Entering step `%s'\n"
msgstr "தற்போது இந்த  `%s நிலைக்கு செல்கிறோம்' \n"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Go on anyway?"
msgstr "தொடர்ந்து செல்லலாமா?"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error installing packages:"
msgstr "பொதிகளை நிறுவுவதில் பிழை நேர்ந்துள்ளது"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "There was an error ordering packages:"
msgstr "பொதிகளை அடுக்குவதில் பிழை நேர்ந்துள்ளது"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"சிடியை மாற்றவும்\n"
"\n"
"தயவுசெய்து \"%s\" என பெயரிடப்பட்ட நிறுவல் சிடியை சிடிராமில் வைக்கவும். வைத்தவுடன் சரி "
"என்ற பொத்தானை கிளிக் செய்யவும்\n"
"இந்த சிடி இல்ைலயென்றால் நீக்கு என்ற பொத்தானை கிளிக் செய்தால் இந்த சிடியிலிருந்து நிறுவல் "
"நின்றுவிடும்"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Refuse"
msgstr "ஒப்புக்ெகாள்ளவில்ைல"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakautoinst:1
#, c-format
msgid "Accept"
msgstr "ஒப்புக் கொள்கிறேன்"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Installing package %s"
msgstr "%s பொதி நிறுவப்படுகிறது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "%d packages"
msgstr "%d பொதிகள்"

#: ../../install_steps_gtk.pm:1
#, fuzzy, c-format
msgid "No details"
msgstr "விவரங்கள்"

#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Details"
msgstr "விவரங்கள்"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Please wait, preparing installation..."
msgstr "தயவுசெய்து காத்திருக்கவும்..நிறுவுதல் தொடங்கப்ேபாகிறது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Time remaining "
msgstr "தேவைப்படும் நேரம்"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Estimating"
msgstr "கணக்கிடப்படுகிறது"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing"
msgstr "நிறுவப்படுகிறது"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the packages you want to install"
msgstr "நிறுவ வேண்டிய பொதிகளை தேர்வுச் செய்யுங்கள் "

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Minimal install"
msgstr "குறைந்தபட்ச நிறுவல்"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Updating package selection"
msgstr "பொதிகள் தேர்வை நிகழ்நிலைப் படுத்து"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Load/Save on floppy"
msgstr "நெகிழ்வட்டில் சேமிக்கவும்"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "<- Previous"
msgstr "<- முன்னது"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "Install"
msgstr "நிறுவு"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Show automatically selected packages"
msgstr "தானாக தேர்வுச் செய்யப்பட்டுள்ள பொதிகளைக் காட்டு"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "இந்த பொதியை.நீக்க முடியாது. இது நிகழ்நிலைப்படுத்த வேண்டிய பொதி"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"இந்த பொதி நிறுவப்படவேண்டும்.ஓப்புதல் தரவும்?.\n"
"இதை நீக்க வேண்டுமா?"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "இந்த பொதியை.நீக்க முடியாது. இது ஏற்கனவே நிறுவப்பட்டள்ளது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "இது கட்டாய பொதி. இதனை நீக்க முடியாது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "You can't select/unselect this package"
msgstr "நீங்கள் இந்த பொதியை தேர்வு/நீக்க முடியாது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be removed"
msgstr "கிழ்கானும் பொதிகள் நீக்கப்படுகிறது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "The following packages are going to be installed"
msgstr "கிழ்கானும் பொதிகள் நிறுவுவதற்கு தேர்வுச் செய்யப்பட்டுள்ளது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "இடமில்ைல என்பதால்  நீங்கள் இந்த பொதியைத் தே`ர்வுச் செய்ய முடியாது"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Importance: %s\n"
msgstr "முக்கியத்துவும்: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Size: %d KB\n"
msgstr "கிலோ பைட்டில் அளவு  %d \n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Version: %s\n"
msgstr "வெளியீடு: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Name: %s\n"
msgstr "பெயர்: %s\n"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid "Bad package"
msgstr "தவறான பொதி"

#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Other"
msgstr "மற்றவை"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Total size: %d / %d MB"
msgstr "மெகா பைட்டில் மொத்த அளவு  %d / %d"

#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Next ->"
msgstr "அடுத்து ->"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Individual package selection"
msgstr "தனித்னி பொதியாக தேர்வுச் செய்"

#: ../../install_steps_gtk.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#, c-format
msgid "Help"
msgstr "உதவி"

#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
#, c-format
msgid "Package Group Selection"
msgstr "பொதிகள் குழுத் தேர்வு"

#: ../../install_steps_gtk.pm:1
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"உங்கள் கணினியில் வளங்கள் குறைவாக உள்ளதால்\n"
"மாண்ட்ரேக் லினக்ஸ் நிறுவுவதில் பிழை ஏற்படலாம். நீங்கள் உரைவழி நிறுவலாம்,\n"
"சிடியில் நிறுவ தொடங்கும் போது  `F1'  என அழுத்தி விட்டு,  `text'. என அடிக்கவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save packages selection"
msgstr "பொதித் தேர்வைச் சேமி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automated"
msgstr "தானியங்கி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Replay"
msgstr "மறு இயக்கம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"தானியங்கி நிறுவல்வட்டின் மூலம் நீங்கள் நிறுவலை ,\n"
"முழுதும் தானாக நிறுவ வைக்கலாம்,\n"
"இது இன்னும் பல கணினிகளில் இதே போல் நிறுவ,\n"
"பயன்படலாம்,\n"
",\n"
"நீங்கள் மீண்டும் ஒருமுறை உங்கள் நிறுவலை மறு இயக்கம் செய்யலாம்,\n"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Generate auto install floppy"
msgstr "தானியங்கி நிறுவல்வட்ைட உருவாக்கவும்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Reboot"
msgstr "மூலம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"சில செயல்கள் இன்னும் முடிக்கப்படவில்ைல\n"
"\n"
"நீங்கள் நிச்சயம் நிறுவுதலை விட்டு வெளியேற விரும்புகிறீர்களா?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Creating auto install floppy..."
msgstr "தானியங்கி நிறுவல்வட்ைட உருவாக்கவும்"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "வெற்று நெகிழ்வட்ைட  %s இயக்கியில் உள்ளிடவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள் You may need to change your Open "
"Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "துவங்குநிரலை நிறுவப்படுவதில் பிழை நேர்ந்துள்ளது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Installing bootloader"
msgstr "துவங்குநிரலை நிறுவப்படுகிறது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you want to use aboot?"
msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr "தயவுசெய்து நிறுவுவதற்கு ஆங்கிலத்ைத பயன்படுத்துங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing bootloader..."
msgstr "துவங்குநிரலை உருவாக்குகிறேன்..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin Password"
msgstr "வின்டோஸ் களம் நிர்வாகியின் கடவுச்ெசால்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Domain Admin User Name"
msgstr "வின்டோஸ் களத்தின் பயனர் பெயர்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Windows Domain"
msgstr "வின்டோஸ் களம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication Windows Domain"
msgstr "நல்குாிமை வின்டோஸ் களம்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"இதை நீங்கள் பார்த்தால் நீங்கள் மிகப் தவறான \n"
"தேர்வு செய்து இருக்கிறீர்கள் என \n"
"அர்த்தம். உடனடியாக கணினியில் நல்ல தேர்ச்சியுள்ளவர் \n"
"உதவியுடன மாண்ட்ரேக் லினக்ைஸ நிறுவுங்கள். அல்லது ஆரம்பத்தலிருந்து\n"
"பொறுமையாக தேர்வுச் செய்து வாருங்கள். வாழ்த்துக்கள்\n"
"தயவுசெய்து ஆங்கிலத்தில் நிறுவுங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Server"
msgstr "NIS  சேவையகம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS Domain"
msgstr "NIS  களம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication NIS"
msgstr "நல்குாிமை NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Server"
msgstr "LDAP சேவையகம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Authentication LDAP"
msgstr "நல்குாிமை LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Local files"
msgstr "உள்ளமை கோப்புகள்"

#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
#, c-format
msgid "Authentication"
msgstr "நல்குாிமை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"உங்கள் கடவுச்ெசால் மிக சிறியதாக உள்ளது (குறைந்த பட்சம் இது %d எழுத்துக்கள் இருக்க "
"வேண்டும்)  "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No password"
msgstr "கடவுச்ெசால் ஏதுமில்ைல"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Set root password"
msgstr "உங்கள் கடவுச்ெசால்ைல உருவாக்கவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "சேவைகள்: %d பதிவான %d செயல்படுத்தப்பட்டது  "

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#, c-format
msgid "Services"
msgstr "சேவைகள்"

#: ../../install_steps_interactive.pm:1 ../../services.pm:1
#: ../../standalone/drakbackup:1
#, c-format
msgid "System"
msgstr "கணினி அமைப்பு"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Bootloader"
msgstr "பயன்படுத்த வேண்டிய துவங்குநிரல்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Boot"
msgstr "மூலம்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "disabled"
msgstr "முடமாக்கு"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "activated"
msgstr "இப்போது துவக்கு"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Firewall"
msgstr "நெருப்புச்சுவர்/வழிப்படுத்தி"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Security"
msgstr "பாதுகாப்பு"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Security Level"
msgstr "பாதுகாப்பு நிலை"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "not configured"
msgstr "மறுவடிவமை"

#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Network"
msgstr "வலையமைப்பு"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Network & Internet"
msgstr "வலையமைப்பு அட்டை"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "துவங்கும் போது வரைவியல்வழியில் துவங்குக"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Hardware"
msgstr "டிரேக்வன்பொருள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "TV card"
msgstr "TV அட்ைட"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "ஒலியட்ைட ஏதும் கண்டுபிடிக்க முடியவில்ைல. டிரேக்வன்பொருள் மாயாவியை பயன்படுத்துங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr "\"sndconfig\" என்ற நிரல் மூலம் உங்கள் ஒலியட்ைடயை வடிவமைக்க முடியும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "உங்களிடம் ISA ஒலியட்ைட ஏதேனும் உள்ளனவா?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Sound card"
msgstr "ஒலியட்ைட"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Remote CUPS server"
msgstr "தொலை கப்ஸ் சேவையகம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No printer"
msgstr "அச்சுப்ெபறி ஏதுமில்ைல"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer"
msgstr "அச்சுப்ெபறி"

#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
#, c-format
msgid "Mouse"
msgstr "எலி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Timezone"
msgstr "கால மண்டலம்"

#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
#, c-format
msgid "Keyboard"
msgstr "விசைப்பலகை"

#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
#, c-format
msgid "Summary"
msgstr "உரை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "NTP Server"
msgstr "NTP சேவையகம்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "தானியங்கி நேர ஒத்தியக்கி(NTP உதவியுடன்)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Hardware clock set to GMT"
msgstr "வன்பொருள் கடிகாரத்ைத GMT க்கு மாற்று"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Which is your timezone?"
msgstr "நீங்கள் எந்த கால மண்டலத்ைதச் சேர்ந்தவர்?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "இணைப் பதிப்புதளங்களில் தற்போதுள்ள பொதிகளை அறிய இணையதளம் தொடர்புகொள்ளப்படுகிறது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "பொதிகளை எங்கிருந்து இறக்க விரும்புகிறீர்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr "தற்போதுள்ள இணைப் பதிப்புதளங்களை அறிய மாண்ட்ரேக் இணையதளம் தொடர்புகொள்ளப்படுகிறது"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"இந்த பொதிகள் உங்கள் இயக்க நிரல் வெளியிட்ட பின் வெளிவந்தவை\n"
"இவை பொதுவாக பிழைகளை நீக்கவும், பாதுகாப்பு குறைபாடுகளை\n"
"நீக்கவும் வெளியிடப்பட்டவை \n"
"\n"
"இவற்றை நிறுவ உங்களுக்கு இணையத்தொடர்பு தேவை\n"
"\n"
"\n"
"இவற்றை நிறுவ விருப்பமா ?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "தயவுசெய்து நிகழ்நிலைப்படுத்தப்பட்ட வட்ைட மீண்டும் %s இயக்கியில் போடவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "தயவுசெய்து தொடங்குவட்ைட மீண்டும் %s இயக்கியில் போடவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Post-install configuration"
msgstr "நிறுவியபின் சேய்ய வேண்டிய வடிவமைப்புகள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"இந்த பொதி நிறுவப்படுகிறது%s\n"
"%d%%"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Preparing installation"
msgstr "நிறுவுதல் தொடங்குகிறது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr " \"%s\" என பெயரிடப்பட்ட சிடி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"கிழே உள்ள அனைத்து சிடிக்களும் இருந்தால் சரி என கிளிக் செய்யவும்.\n"
"ஒன்று கூட இல்ைலயென்றால் நீக்கு என்பதை கிளிக் செய்யவும்\n"
"சில சிடிகள் மட்டும் இல்ைலயென்றால் இல்லாதவற்றை மட்டும் நீக்கிவிட்டு சரி என கிளிக் செய்யவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "மிகச்சிறிய நிறுவல்(urpmi கூட கிடையாது)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "உதவி நூல்களுடன் (குறைந்தபட்சம் இது தேவை!)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "With X"
msgstr "X உடன் வரைவியல்வழியிடல பயன்படுத்த இது தேவை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"நீங்கள் பொதி குழுக்கள் எதனையும் தேர்வு செய்யவில்ைல.\n"
"தயவுசெய்து உங்களுக்கு தேவையானதை தேர்வு செய்யவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Type of install"
msgstr "நிறுவல் முறை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Selected size is larger than available space"
msgstr "நீங்கள் தேர்வு செய்துள்ள அளவு, இருக்குமிடத்ைத விட அதிகமாக உள்ளது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "பொதிகள் தேர்வைக் கொண்ட நெகிழ்வட்ைட உள்ளீடு  செய்யவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Loading from floppy"
msgstr "நெகிழ்வட்டில் இருந்து ஏற்றுப்படுகிறது"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Package selection"
msgstr "பொதிகள் தேர்வு"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Save on floppy"
msgstr "நெகிழ்வட்டில் சேமியுங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Load from floppy"
msgstr "நெகிழ்வட்டில் இருந்து ஏற்றுங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"தயவுசெய்து உங்கள் பொதி தேர்வை ஒரு நெகிழ்வட்டில் சேமிக்கவும்.\n"
"இவ்வாறு சேமிக்கும் முறை தானியங்கி-நிறுவலை ஒத்து இருக்கும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "உங்கள் வட்டில் போதுமான இடமில்ைல (%d > %d)"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Finding packages to upgrade..."
msgstr "மேம்படுத்தப்பட வேண்டிய பொதிகள் அறியப்படுகின்றன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking at packages already installed..."
msgstr "ஏற்கனவே நிறுவப்பட்டுள்ள பொதிகள் பார்வையிடப்படுகின்றன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages..."
msgstr "இருக்கும் பொதிகள் பார்வையிடப்படுகின்றன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "இருக்கும் பொதிகள் பார்வையிடப்பட்டு  rpm தரவு மீத்தொடக்கப் படுகின்றன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "இடமாற்றுக்கு போதுமான இடமில்ைல, தயவுசெய்து இன்னும் சிறிது சேர்க்கவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr "%s என்ற கோப்பமைப்பு சோதிக்கப் படவில்ைல. தவறு ஏதுமிருநதால் அதை சரிசெய்யலாமா? "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Check bad blocks?"
msgstr "கட்டங்களை சோதிக்க வேண்டுமா?"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the partitions you want to format"
msgstr "எந்த வகிர் வடிவூட்டபட வேண்டுமென தேர்வு சேய்யுங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "நீங்கள் செய்த மாற்றங்கள் செயல்பட உங்கள் கணினியை மறுதொடக்கம் செய்யவும்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"துவங்குநிரலை நிறுவ இடமில்ைல. நிறுவுதல் தொடரும். ஆனால் உங்கள் லினக்ஸ் இயக்க நிரலை துவக்க "
"டிரேக்வட்ைட பயன்படுத்துங்கள்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Choose the mount points"
msgstr "ஏற்றப் புள்ளிகளை தேர்வுச் செய்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "ஏற்றப் புள்ளிகளுக்காக வகிர்கள் தேடப்படுகின்றன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "No partition available"
msgstr "வகிர் ஏதுமில்ைல"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring IDE"
msgstr "IDE  வடிவமைக்கப்படுகிறது..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIA அட்ைடகள் வடிவமைக்கப்படுகிறது..."

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 3 Emulation"
msgstr "3-பொத்தான் போன்மி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Button 2 Emulation"
msgstr "2-பொத்தான் போன்மி"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Buttons emulation"
msgstr "பொத்தான் போன்மி"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "தயவுசெய்து, உங்கள் எலி இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறைவயைத் தேர்வுச் செய்யுங்கள்"

#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
#, c-format
msgid "Mouse Port"
msgstr "எலி இணைக்கப்பட்டுள்ள துறை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your type of mouse."
msgstr "தயவுசெய்து, உங்கள் எலியின் வகையைத் தேர்வுச் செய்யுங்கள் "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Upgrade"
msgstr "நிகழ்நிலைப்படுத்துதல்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Upgrade %s"
msgstr "நிகழ்நிலைப்படுத்துதல்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Is this an install or an upgrade?"
msgstr "இது நிறுவுதலா அல்லது நிகழ்நிலைப்படுத்துதலா ?"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "Install/Upgrade"
msgstr "நிறுவுதுல்/நிகழ்நிலைப்படுத்துதல்"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "உங்கள் பயன்பாட்டிற்கு உள்ள விசைப்பலகைகள் அனைத்தும் இங்கே கொடுக்கப்பட்டுள்ளன"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "Please choose your keyboard layout."
msgstr "தயவுசெய்து உங்கள் விசைப்பலகை இட அமைவைத் தேர்வு செய்க "

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "License agreement"
msgstr "அனுமதி ஒப்பந்தம்"

#: ../../install_steps_interactive.pm:1
#, fuzzy, c-format
msgid "default:LTR"
msgstr "கொடாநிலை"

#: ../../install_steps_interactive.pm:1
#, c-format
msgid "An error occurred"
msgstr "பிழை நேர்ந்துள்ளது மன்னிக்கவும்"

#: ../../install_steps_newt.pm:1
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "

#: ../../install_steps_newt.pm:1
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "மாண்ட்ரேக் லினக்ஸ் நிறுவல்  %s"

#: ../../install_steps.pm:1
#, c-format
msgid "No floppy drive available"
msgstr "நெகிழ் வட்டகம் ஏதும் இல்ைல"

#: ../../install_steps.pm:1
#, c-format
msgid "Welcome to %s"
msgstr "%s க்கு நல்வரவு "

#: ../../install_steps.pm:1
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"சில முக்கிய பொதிகள் நிறுவுவதில் பிழை நேர்ந்துள்ளது\n"
"உங்கள் சிடி அல்லது சிடி இயக்கி பழுதடைந்து இருக்கலாம்.\n"
"உங்கள் சிடியைச் சோதிக்க ஏற்கனவே இயங்குகின்ற கணினியில் \"rpm -qpl Mandrake/RPMS/*.rpm "
"என கட்டளையிடவும்\"\n"

#: ../../install_steps.pm:1
#, c-format
msgid "Duplicate mount point %s"
msgstr "ஏற்றப் புள்ளி %s ஏற்கனவே உள்ளது"

#: ../../install_steps.pm:1
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"பிழை நேர்ந்துள்ளது மன்னிக்கவும் எனக்கு என்ன செய்வதென்று தெரியவில்ைல\n"
"தொடர்ந்து செல்வது உங்கள் பொறுப்பு"

#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
#: ../../standalone/service_harddrake:1
#, c-format
msgid "Please wait"
msgstr "தயவுசெய்து காத்திருக்கவும்.."

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
#, c-format
msgid "Ok"
msgstr "சரி"

#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
#: ../../interactive/newt.pm:1
#, c-format
msgid "Finish"
msgstr "முடிந்தது"

#: ../../interactive.pm:1 ../../standalone/draksec:1
#, c-format
msgid "Basic"
msgstr "தொடக்க"

#: ../../interactive.pm:1
#, c-format
msgid "Advanced"
msgstr "அலாதியான "

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, fuzzy, c-format
msgid "Remove"
msgstr "நுழைவிடத்ைத நீக்கு"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#, c-format
msgid "Modify"
msgstr "மாற்று"

#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
#, c-format
msgid "Add"
msgstr "சேர்"

#: ../../interactive.pm:1
#, c-format
msgid "Choose a file"
msgstr "கோப்பு ஒன்றைத் தேர்வுச் செய்"

#: ../../keyboard.pm:1
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"நீங்கள் பயன்படுத்தவிருக்கும் பலவகை விசைப்பலகை இட அமைவுகளை\n"
"மாற்ற எந்த விசை அல்லது விசை சேர்மானங்களை தேர்வுச் செய்க\n"
"(உதாரனத்திற்கு தமிழ் மற்றும் ஆங்கிலம்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Right \"Windows\" key"
msgstr "வலது வின்டோஸ் விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "Left \"Windows\" key"
msgstr "இடது வின்டோஸ் விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "\"Menu\" key"
msgstr "\"Menu\" விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt மற்றும் Shift விசைகளும் ஒன்றாக"

#: ../../keyboard.pm:1
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl மற்றும் Alt  விசைகளும் ஒன்றாக"

#: ../../keyboard.pm:1
#, c-format
msgid "CapsLock key"
msgstr "CapsLock விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control  மற்றும் Shift விசைகளும் ஒன்றாக"

#: ../../keyboard.pm:1
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "இரண்டு Shift விசைகளும் ஒன்றாக"

#: ../../keyboard.pm:1
#, c-format
msgid "Right Alt key"
msgstr "வலது  Alt விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "Yugoslavian (latin)"
msgstr "யுகோஸ்சுலோவிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "வியட்நாமிய "

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard (international)"
msgstr "அமெரிக்க விசைப்பலகை(சர்வதேச)"

#: ../../keyboard.pm:1
#, c-format
msgid "US keyboard"
msgstr "அமெரிக்க விசைப்பலகை"

#: ../../keyboard.pm:1
#, c-format
msgid "UK keyboard"
msgstr "ஆங்கில விசைப்பலகை"

#: ../../keyboard.pm:1
#, c-format
msgid "Ukrainian"
msgstr "உக்ரேனிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "புது துருக்கிய "

#: ../../keyboard.pm:1
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "துருக்கிய "

#: ../../keyboard.pm:1
#, c-format
msgid "Tajik keyboard"
msgstr "தாஜிக் விசைப்பலகை"

#: ../../keyboard.pm:1
#, c-format
msgid "Thai keyboard"
msgstr "தாய் விசைப்பலகை"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "ஆர்மினியன்(தட்டச்சு)"

#: ../../keyboard.pm:1
#, fuzzy, c-format
msgid "Tamil (ISCII-layout)"
msgstr "தமிழ்(TSCII- இதை தேர்வு செய்யவும்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Serbian (cyrillic)"
msgstr "செர்பிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "சுலோவெனிய(குவர்ட்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "சுலோவெனிய(குவார்ட்ஸ்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Slovenian"
msgstr "சுலோவெனிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Swedish"
msgstr "சுவிடிஷ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian (Yawerty)"
msgstr "ரஷிய(யார்ட்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Russian"
msgstr "ரஷியன்"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwerty)"
msgstr "ரோமேனிய(குவர்ட்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Romanian (qwertz)"
msgstr "ரோமேனிய(குவார்ட்ஸ்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Canadian (Quebec)"
msgstr "கனடிய(Quebec)"

#: ../../keyboard.pm:1
#, c-format
msgid "Portuguese"
msgstr "போர்த்துகிசிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwertz layout)"
msgstr "பொலிஷ்(குவார்ட்ஸ்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish (qwerty layout)"
msgstr "பொலிஷ்(குவர்ட்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Norwegian"
msgstr "நார்ேவ "

#: ../../keyboard.pm:1
#, c-format
msgid "Dutch"
msgstr "டச்சு"

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (US)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Maltese (UK)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Mongolian (cyrillic)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Myanmar (Burmese)"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Macedonian"
msgstr "மாசிடோனிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Malayalam"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Latvian"
msgstr "லாட்விய"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "லிதுவேனிய-ஒலியமைப்பு குவர்ட்டி"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "லிதுவேனிய-குவர்ட்டி"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "லிதுவேனிய-புதிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "லிதுவேனிய-பழைய"

#: ../../keyboard.pm:1
#, c-format
msgid "Laotian"
msgstr "லாவோஸ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Latin American"
msgstr "லத்தின் அமெரிக்க"

#: ../../keyboard.pm:1
#, c-format
msgid "Korean keyboard"
msgstr "கொரிய விசைப்பலகை"

#: ../../keyboard.pm:1
#, c-format
msgid "Japanese 106 keys"
msgstr "ஜப்பானிய 106 விசை"

#: ../../keyboard.pm:1
#, c-format
msgid "Inuktitut"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Italian"
msgstr "இத்தாலிய "

#: ../../keyboard.pm:1
#, c-format
msgid "Icelandic"
msgstr "ஐஸ்லாந்து "

#: ../../keyboard.pm:1
#, c-format
msgid "Iranian"
msgstr "இரானிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli (Phonetic)"
msgstr "இஸ்ரலேிய(ஒலியமைப்பு)"

#: ../../keyboard.pm:1
#, c-format
msgid "Israeli"
msgstr "இஸ்ரலேிய"

#: ../../keyboard.pm:1
#, c-format
msgid "Croatian"
msgstr "குரேசிய "

#: ../../keyboard.pm:1
#, c-format
msgid "Hungarian"
msgstr "அங்கேரிய "

#: ../../keyboard.pm:1
#, c-format
msgid "Gurmukhi"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Gujarati"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "Greek"
msgstr "கிரேக்கம் "

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "ஜார்ஜியா"

#: ../../keyboard.pm:1
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "ஜார்ஜியா(\"Russian\" layout)"

#: ../../keyboard.pm:1
#, c-format
msgid "French"
msgstr "பிரஞ்சு "

#: ../../keyboard.pm:1
#, c-format
msgid "Finnish"
msgstr "பின்னிஷ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Spanish"
msgstr "ஸ்பானிஷ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Estonian"
msgstr "எஸ்தோனியா"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Swedish)"
msgstr "வோரக்-சுவிடிசு "

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "வோரக்(நார்ேவ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak (US)"
msgstr "வோரக்(US)"

#: ../../keyboard.pm:1
#, c-format
msgid "Danish"
msgstr "டச்சு"

#: ../../keyboard.pm:1
#, c-format
msgid "Devanagari"
msgstr ""

#: ../../keyboard.pm:1
#, c-format
msgid "German (no dead keys)"
msgstr "ெஜர்மன்"

#: ../../keyboard.pm:1
#, c-format
msgid "German"
msgstr "ெஜர்மன்"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTY)"
msgstr "செக்(குவர்ட்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Czech (QWERTZ)"
msgstr "செக்(குவர்டி)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (French layout)"
msgstr "சுவிஷ்(பிரெஞ்சு)"

#: ../../keyboard.pm:1
#, c-format
msgid "Swiss (German layout)"
msgstr "சுவிஷ்(ெஜர்மன்)"

#: ../../keyboard.pm:1
#, c-format
msgid "Belarusian"
msgstr "பேலாருஸ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Bosnian"
msgstr "போஸ்னியா"

#: ../../keyboard.pm:1
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "பிரேசில்"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (BDS)"
msgstr "பல்கேரிய(பிடிஸ)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "பல்கேரிய(ஒலியமைப்பு)"

#: ../../keyboard.pm:1
#, c-format
msgid "Bengali"
msgstr "வங்காளம்"

#: ../../keyboard.pm:1
#, c-format
msgid "Belgian"
msgstr "பெல்ஜியன்"

#: ../../keyboard.pm:1
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "அசர்பைஜான்"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (phonetic)"
msgstr "ஆர்மினியன்(ஒலியமைப்பு)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (typewriter)"
msgstr "ஆர்மினியன்(தட்டச்சு)"

#: ../../keyboard.pm:1
#, c-format
msgid "Armenian (old)"
msgstr "ஆர்மினியன்(பழைய)"

#: ../../keyboard.pm:1
#, c-format
msgid "Albanian"
msgstr "அல்பேனியன்"

#: ../../keyboard.pm:1
#, c-format
msgid "Polish"
msgstr "பொலிஸ்"

#: ../../keyboard.pm:1
#, c-format
msgid "Dvorak"
msgstr "வோராக்"

#: ../../lang.pm:1
#, c-format
msgid "Zimbabwe"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Zambia"
msgstr ""

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "South Africa"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Serbia"
msgstr "தொடர்நிலைத் துறை"

#: ../../lang.pm:1
#, c-format
msgid "Mayotte"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Yemen"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Samoa"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Vanuatu"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Vietnam"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Virgin Islands (British)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Venezuela"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Vatican"
msgstr "லாட்விய"

#: ../../lang.pm:1
#, c-format
msgid "Uzbekistan"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Uruguay"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "United States Minor Outlying Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Uganda"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Ukraine"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Tanzania"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Taiwan"
msgstr "லாட்விய"

#: ../../lang.pm:1
#, c-format
msgid "Tuvalu"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Trinidad and Tobago"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Turkey"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Tonga"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Tunisia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Turkmenistan"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "East Timor"
msgstr "கிழக்கு தைமூர்"

#: ../../lang.pm:1
#, c-format
msgid "Tokelau"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Tajikistan"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Thailand"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Togo"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "French Southern Territories"
msgstr "பிரஞ்சு தென் குடியிருப்பு"

#: ../../lang.pm:1
#, c-format
msgid "Chad"
msgstr "சாட்"

#: ../../lang.pm:1
#, c-format
msgid "Turks and Caicos Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Swaziland"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Syria"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "El Salvador"
msgstr "எல் சால்வேடார்"

#: ../../lang.pm:1
#, c-format
msgid "Sao Tome and Principe"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Suriname"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Somalia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Senegal"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "San Marino"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Sierra Leone"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Slovakia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Slovenia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Helena"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Singapore"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Sudan"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Seychelles"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Solomon Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saudi Arabia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Rwanda"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Russia"
msgstr "ரஷியன்"

#: ../../lang.pm:1
#, c-format
msgid "Romania"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Reunion"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Qatar"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Palau"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Paraguay"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Portugal"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Palestine"
msgstr "தொடங்குத்திரை தேர்வு"

#: ../../lang.pm:1
#, c-format
msgid "Puerto Rico"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Pitcairn"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Poland"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Pakistan"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Philippines"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Papua New Guinea"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "French Polynesia"
msgstr "பிரஞ்சு பாலினேசியா"

#: ../../lang.pm:1
#, c-format
msgid "Peru"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Panama"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Oman"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "New Zealand"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Niue"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Nauru"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Nepal"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Nicaragua"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Nigeria"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Norfolk Island"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Niger"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "New Caledonia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Namibia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mozambique"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Malaysia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mexico"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Malawi"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Maldives"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mauritius"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Malta"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Montserrat"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mauritania"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Martinique"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Northern Mariana Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mongolia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Myanmar"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Mali"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Macedonia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Marshall Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Madagascar"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Moldova"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Monaco"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Morocco"
msgstr ""

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Libya"
msgstr "லைபிரியா"

#: ../../lang.pm:1
#, c-format
msgid "Latvia"
msgstr "லாட்வியா"

#: ../../lang.pm:1
#, c-format
msgid "Luxembourg"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Lithuania"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Lesotho"
msgstr "லெசாதோ"

#: ../../lang.pm:1
#, c-format
msgid "Liberia"
msgstr "லைபிரியா"

#: ../../lang.pm:1
#, c-format
msgid "Sri Lanka"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Liechtenstein"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Lucia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Lebanon"
msgstr "லெபனான்"

#: ../../lang.pm:1
#, c-format
msgid "Laos"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Kazakhstan"
msgstr "கசகஸ்தான்"

#: ../../lang.pm:1
#, c-format
msgid "Cayman Islands"
msgstr "கேமன் தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Kuwait"
msgstr "குவைத்"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Korea"
msgstr "மேலும்"

#: ../../lang.pm:1
#, c-format
msgid "Korea (North)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Comoros"
msgstr "கோமோரஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Kiribati"
msgstr "கிரிபாடி"

#: ../../lang.pm:1
#, c-format
msgid "Cambodia"
msgstr "கம்போடியா"

#: ../../lang.pm:1
#, c-format
msgid "Kyrgyzstan"
msgstr "கிரிகிஸ்தான்"

#: ../../lang.pm:1
#, c-format
msgid "Kenya"
msgstr "கென்யா"

#: ../../lang.pm:1
#, c-format
msgid "Japan"
msgstr "ஜப்பான்"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Jordan"
msgstr "ேஜார்டான்"

#: ../../lang.pm:1
#, c-format
msgid "Jamaica"
msgstr "ஜமைக்கா"

#: ../../lang.pm:1
#, c-format
msgid "Iceland"
msgstr "ஐஸ்லாந்து"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Iran"
msgstr "ஈராக்"

#: ../../lang.pm:1
#, c-format
msgid "Iraq"
msgstr "ஈராக்"

#: ../../lang.pm:1
#, c-format
msgid "British Indian Ocean Territory"
msgstr "பிரிட்டீஷ் தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "India"
msgstr "இந்தியா"

#: ../../lang.pm:1
#, c-format
msgid "Israel"
msgstr "இஸ்ரேல்"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Ireland"
msgstr "அயர்லாந்து"

#: ../../lang.pm:1
#, c-format
msgid "Indonesia"
msgstr "இந்தோனிசியா"

#: ../../lang.pm:1
#, c-format
msgid "Hungary"
msgstr "ஹங்கேரி"

#: ../../lang.pm:1
#, c-format
msgid "Haiti"
msgstr "ைஹதி"

#: ../../lang.pm:1
#, c-format
msgid "Croatia"
msgstr "குரேசியா"

#: ../../lang.pm:1
#, c-format
msgid "Honduras"
msgstr "ெஹான்டுரஸ்"

#: ../../lang.pm:1
#, fuzzy, c-format
msgid "Heard and McDonald Islands"
msgstr "மெக்டொனால்ட் தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Hong Kong"
msgstr "ஹாங்காங்"

#: ../../lang.pm:1
#, c-format
msgid "Guyana"
msgstr "கயானா"

#: ../../lang.pm:1
#, c-format
msgid "Guinea-Bissau"
msgstr "கினியா-பிஸ்ஸ்ாவு"

#: ../../lang.pm:1
#, c-format
msgid "Guam"
msgstr "குவாம்"

#: ../../lang.pm:1
#, c-format
msgid "Guatemala"
msgstr "குவாடிமாலா"

#: ../../lang.pm:1
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Equatorial Guinea"
msgstr "கினியா"

#: ../../lang.pm:1
#, c-format
msgid "Guadeloupe"
msgstr "குவாடிலோப்"

#: ../../lang.pm:1
#, c-format
msgid "Guinea"
msgstr "கினியா"

#: ../../lang.pm:1
#, c-format
msgid "Gambia"
msgstr "ஜாம்பியா"

#: ../../lang.pm:1
#, c-format
msgid "Greenland"
msgstr "கிரின்லாந்து"

#: ../../lang.pm:1
#, c-format
msgid "Gibraltar"
msgstr "கிப்ரேலடார்"

#: ../../lang.pm:1
#, c-format
msgid "Ghana"
msgstr "கானா"

#: ../../lang.pm:1
#, c-format
msgid "French Guiana"
msgstr "பிரஞ்சு கினியா "

#: ../../lang.pm:1
#, c-format
msgid "Georgia"
msgstr "ஜார்ஜியா"

#: ../../lang.pm:1
#, c-format
msgid "Grenada"
msgstr "கிரேனடா"

#: ../../lang.pm:1 ../../network/tools.pm:1
#, c-format
msgid "United Kingdom"
msgstr "பிரிட்டன்"

#: ../../lang.pm:1
#, c-format
msgid "Gabon"
msgstr "கேபான்"

#: ../../lang.pm:1
#, c-format
msgid "Faroe Islands"
msgstr "பரோ தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Micronesia"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "பாக்லாந்து தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Fiji"
msgstr "பிஜி"

#: ../../lang.pm:1
#, c-format
msgid "Finland"
msgstr "பின்லாந்து"

#: ../../lang.pm:1
#, c-format
msgid "Ethiopia"
msgstr "எத்தியோப்பியா"

#: ../../lang.pm:1
#, c-format
msgid "Spain"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Eritrea"
msgstr "எரிதிரியா"

#: ../../lang.pm:1
#, c-format
msgid "Western Sahara"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Egypt"
msgstr "எகிப்து"

#: ../../lang.pm:1
#, c-format
msgid "Estonia"
msgstr "எஸ்தோனியா"

#: ../../lang.pm:1
#, c-format
msgid "Ecuador"
msgstr "இகுவேடார்"

#: ../../lang.pm:1
#, c-format
msgid "Algeria"
msgstr "அல்ஜிரியா"

#: ../../lang.pm:1
#, c-format
msgid "Dominican Republic"
msgstr "டோமினிகா குடியரசு"

#: ../../lang.pm:1
#, c-format
msgid "Dominica"
msgstr "டோமினிகா"

#: ../../lang.pm:1
#, c-format
msgid "Denmark"
msgstr "டென்மார்க்"

#: ../../lang.pm:1
#, c-format
msgid "Djibouti"
msgstr "டிஜிபொட்டி"

#: ../../lang.pm:1
#, c-format
msgid "Cyprus"
msgstr "சைப்ரஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Christmas Island"
msgstr "கிருஸ்துமஸ் தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Cape Verde"
msgstr "கேப் வேர்தி"

#: ../../lang.pm:1
#, c-format
msgid "Cuba"
msgstr "கியுபா"

#: ../../lang.pm:1
#, c-format
msgid "Colombia"
msgstr "கொலம்பியா "

#: ../../lang.pm:1
#, c-format
msgid "China"
msgstr "சீனா"

#: ../../lang.pm:1
#, c-format
msgid "Cameroon"
msgstr "கேமருன்"

#: ../../lang.pm:1
#, c-format
msgid "Chile"
msgstr "சிலி"

#: ../../lang.pm:1
#, c-format
msgid "Cook Islands"
msgstr "குக் தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Cote d'Ivoire"
msgstr "டீகாட் டைவோர்"

#: ../../lang.pm:1
#, c-format
msgid "Switzerland"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Central African Republic"
msgstr "காங்கோ"

#: ../../lang.pm:1
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "கோகோ தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Canada"
msgstr "கனடா"

#: ../../lang.pm:1
#, c-format
msgid "Belize"
msgstr "பெலிஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Belarus"
msgstr "பேலாரூஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Botswana"
msgstr "போட்ஸ்வானா"

#: ../../lang.pm:1
#, c-format
msgid "Bouvet Island"
msgstr "பொவே தீவுகள்"

#: ../../lang.pm:1
#, c-format
msgid "Bhutan"
msgstr "பூடான்"

#: ../../lang.pm:1
#, c-format
msgid "Bahamas"
msgstr "பகாமாஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Brazil"
msgstr "பிரேசில்"

#: ../../lang.pm:1
#, c-format
msgid "Bolivia"
msgstr "பொலிவியா"

#: ../../lang.pm:1
#, c-format
msgid "Brunei Darussalam"
msgstr "புருனை"

#: ../../lang.pm:1
#, c-format
msgid "Bermuda"
msgstr "பெர்முடா"

#: ../../lang.pm:1
#, c-format
msgid "Benin"
msgstr "பெனின்"

#: ../../lang.pm:1
#, c-format
msgid "Burundi"
msgstr "புருண்டி"

#: ../../lang.pm:1
#, c-format
msgid "Bahrain"
msgstr "பஹ்ரைன்"

#: ../../lang.pm:1
#, c-format
msgid "Bulgaria"
msgstr "பல்கேரியா"

#: ../../lang.pm:1
#, c-format
msgid "Burkina Faso"
msgstr "பர்கினா போஸா"

#: ../../lang.pm:1
#, c-format
msgid "Bangladesh"
msgstr "வங்கதேசம்"

#: ../../lang.pm:1
#, c-format
msgid "Barbados"
msgstr "பார்படாஸ்"

#: ../../lang.pm:1
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "போஸ்னியா"

#: ../../lang.pm:1
#, c-format
msgid "Azerbaijan"
msgstr "அசர்பைசான்"

#: ../../lang.pm:1
#, c-format
msgid "Aruba"
msgstr "அருபா"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Australia"
msgstr "ஆஸ்திரேலியா"

#: ../../lang.pm:1
#, c-format
msgid "American Samoa"
msgstr "சாமோ"

#: ../../lang.pm:1 ../../standalone/drakxtv:1
#, c-format
msgid "Argentina"
msgstr "அர்ெஜன்டினா"

#: ../../lang.pm:1
#, c-format
msgid "Antarctica"
msgstr "அன்டார்டிகா"

#: ../../lang.pm:1
#, c-format
msgid "Angola"
msgstr "அங்கோலா"

#: ../../lang.pm:1
#, c-format
msgid "Netherlands Antilles"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Armenia"
msgstr "ஆர்மினியா"

#: ../../lang.pm:1
#, c-format
msgid "Albania"
msgstr "அல்பேனியா"

#: ../../lang.pm:1
#, c-format
msgid "Anguilla"
msgstr "அங்குயிலா"

#: ../../lang.pm:1
#, c-format
msgid "Antigua and Barbuda"
msgstr "ஆன்டிகுவா"

#: ../../lang.pm:1
#, c-format
msgid "United Arab Emirates"
msgstr ""

#: ../../lang.pm:1
#, c-format
msgid "Andorra"
msgstr "அந்தோரா"

#: ../../lang.pm:1
#, c-format
msgid "Afghanistan"
msgstr "ஆப்கானிஸ்தான்"

#: ../../loopback.pm:1
#, c-format
msgid "Circular mounts %s\n"
msgstr "சுற்று ஏற்றங்கள் %s\n"

#: ../../lvm.pm:1
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "ஏரண வகிற்றை முதலில் நீக்கு\n"

#: ../../modules.pm:1
#, c-format
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr "PCMCIA பயன்படுத்த 2.4 கருவை பயன்படுத்துங்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "உங்கள் சக்கரத்ைத உருட்டுங்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "To activate the mouse,"
msgstr "உங்கள் எலியை செயல்பட வைக்க"

#: ../../mouse.pm:1
#, c-format
msgid "Please test the mouse"
msgstr "தயவுசெய்து, உங்கள் எலியை சோதனை செய்யுங்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "No mouse"
msgstr "எலி ஏதுமில்ைல"

#: ../../mouse.pm:1
#, c-format
msgid "none"
msgstr "ஒன்றுமில்ைல"

#: ../../mouse.pm:1
#, c-format
msgid "3 buttons"
msgstr "3 பொத்தான்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "2 buttons"
msgstr "2 பொத்தான்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "1 button"
msgstr "1 பொத்தான்"

#: ../../mouse.pm:1
#, c-format
msgid "busmouse"
msgstr "பஸ்எலி"

#: ../../mouse.pm:1
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "கென்ஸிங்க்டன் சிந்திக்கும் எலி-Kensington Thinking Mouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "லாஜிடெக் எலி(பழைய, C7 வகை)"

#: ../../mouse.pm:1
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm:1
#, c-format
msgid "MM Series"
msgstr "MM வகை"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetMouse"
msgstr "ஜினியஸ் நெட்எலி-Genius NetMouse"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "லாஜிடெக் MouseMan+/FirstMouse+"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech CC Series"
msgstr "லாஜிடெக் CC வகை எலி"

#: ../../mouse.pm:1
#, c-format
msgid "Mouse Systems"
msgstr "எலி இயக்கங்கள்"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan"
msgstr "லாஜிடெக் எலி-Logitech MouseMan"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "மைக்ரோசாப்ட் இன்டெலி"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "பொதுவான 3 பொத்தான் எலி"

#: ../../mouse.pm:1
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "பொதுவான 2 பொத்தான் எலி"

#: ../../mouse.pm:1
#, c-format
msgid "serial"
msgstr "தொடர்நிலைத் துறை"

#: ../../mouse.pm:1
#, c-format
msgid "Microsoft Explorer"
msgstr "மைக்ரோசாப்ட் Explorer-மேலோடி"

#: ../../mouse.pm:1
#, c-format
msgid "Wheel"
msgstr "சக்கரம்"

#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Generic"
msgstr "பொது-இன திரையகம்"

#: ../../mouse.pm:1
#, c-format
msgid "Genius NetScroll"
msgstr "ஜினியஸ் நெட்சக்கரஎலி-Genius NetScroll"

#: ../../mouse.pm:1
#, c-format
msgid "GlidePoint"
msgstr "கிளைட்பாயின்ட்-GlidePoint"

#: ../../mouse.pm:1
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "பொதுவான PS2 சக்கர எலி"

#: ../../mouse.pm:1
#, c-format
msgid "Logitech MouseMan+"
msgstr "லாஜிடெக்- Logitech MouseMan+"

#: ../../mouse.pm:1 ../../security/level.pm:1
#, c-format
msgid "Standard"
msgstr "இயல்பான"

#: ../../mouse.pm:1
#, c-format
msgid "Sun - Mouse"
msgstr "சன்-எலி"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "தட்ைட மற்றும் கிளை வரிசைக்குமிடையே மாற்றியமை"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Collapse Tree"
msgstr "கிளைகளை சுருக்கு"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Expand Tree"
msgstr "கிளைகளை விரி"

#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Info"
msgstr "தகவல்"

#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
#, c-format
msgid "Is this correct?"
msgstr "இது சரியா?"

#: ../../my_gtk.pm:1
#, c-format
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr ""
"-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,-*-TSC_Avaangal-regular-r-"
"*-*-25-*-*-*-p-*-tscii-0,*-r-*"

#: ../../partition_table.pm:1
#, c-format
msgid "Error writing to file %s"
msgstr ""

#: ../../partition_table.pm:1
#, c-format
msgid "Bad backup file"
msgstr ""

#: ../../partition_table.pm:1
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr ""

#: ../../partition_table.pm:1
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""

#: ../../partition_table.pm:1
#, c-format
msgid "Extended partition not supported on this platform"
msgstr ""

#: ../../partition_table.pm:1
#, c-format
msgid "mount failed: "
msgstr "ஏற்றத்தில் பிழை நேர்ந்துள்ளது: "

#: ../../pkgs.pm:1
#, c-format
msgid "maybe"
msgstr "தேவைப்பட்டால்"

#: ../../pkgs.pm:1
#, c-format
msgid "nice"
msgstr "அழகானவை"

#: ../../pkgs.pm:1
#, c-format
msgid "very nice"
msgstr "மிக அழகானவை"

#: ../../pkgs.pm:1
#, c-format
msgid "important"
msgstr "முக்கியமானவை"

#: ../../pkgs.pm:1
#, c-format
msgid "must have"
msgstr "நிச்சயம் இருக்க வேண்டியவை"

#: ../../raid.pm:1
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "%d என்ற RAID நிலைக்கு போதுமான வகிர் இல்ைல\n"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed"
msgstr "mkraid தோல்வியடைந்தது"

#: ../../raid.pm:1
#, c-format
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid தோல்வியடைந்தது(raidtools பொதி இல்ைலயா?)"

#: ../../raid.pm:1
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "வகிர் _formatted_ RAID md%d உடன் சேர்க்க முடியவில்ைல"

#: ../../services.pm:1
#, c-format
msgid "Stop"
msgstr "நிறுத்து"

#: ../../services.pm:1
#, c-format
msgid "Start"
msgstr "துவக்கு"

#: ../../services.pm:1
#, c-format
msgid "On boot"
msgstr "தொடங்குதலின் போது"

#: ../../services.pm:1
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"மேல் விவரம் ஏதுமில்ைல\n"
"மன்னிக்கவும்"

#: ../../services.pm:1
#, c-format
msgid "Services and deamons"
msgstr "சேவைகளும் செயலிகளும்"

#: ../../services.pm:1
#, c-format
msgid "stopped"
msgstr "நிறுத்தப்பட்டது"

#: ../../services.pm:1
#, c-format
msgid "running"
msgstr "இயங்குகிறது"

#: ../../services.pm:1
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Database Server"
msgstr "தரவுத்தள வேவையகம்"

#: ../../services.pm:1
#, c-format
msgid "Remote Administration"
msgstr "தொலைவு மேலாண்மை"

#: ../../services.pm:1
#, c-format
msgid "File sharing"
msgstr "கோப்பு பகிர்தல்"

#: ../../services.pm:1
#, c-format
msgid "Internet"
msgstr "இணையம்"

#: ../../services.pm:1
#, c-format
msgid "Printing"
msgstr "அச்சு மேலாளர்"

#: ../../services.pm:1
#, c-format
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Load the drivers for your usb devices."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Launch the sound system on your machine"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""

#: ../../services.pm:1
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron தன்னியக்க செயல் மேலாளர்"

#: ../../services.pm:1
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "அல்சா ஒலியமைப்பு இயக்கத்ைத துவக்கு"

#: ../../standalone.pm:1
#, c-format
msgid "Installing packages..."
msgstr "பொதிகளை நிறுவப்படுகிறது..."

#: ../../standalone.pm:1
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] "
"[--dynamic=dev]"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: ../../standalone.pm:1
#, fuzzy, c-format
msgid "[keyboard]"
msgstr "விசைப்பலகை"

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: ../../standalone.pm:1
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Exit install"
msgstr "நிறுவல் நிரலை விட்டு வெளிச்செல்"

#: ../../steps.pm:1
#, c-format
msgid "Install system updates"
msgstr "இயக்கத்திற்கு தேவையான நிகழ்நிலைப்படுத்தப்பட்ட பொதிகளை நிறுவுதல்"

#: ../../steps.pm:1
#, c-format
msgid "Configure services"
msgstr "சேவைகளை வடிவமையுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Configure X"
msgstr "X-ஐ வடிவமைக்கவும்"

#: ../../steps.pm:1
#, c-format
msgid "Install bootloader"
msgstr "துவங்குநிரலை நிறுவுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Configure networking"
msgstr "வலையமைப்பாக்கங்களை வடிவமையுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Add a user"
msgstr "பயனரைச் சேருங்கள்- இது முக்கியம்"

#: ../../steps.pm:1
#, c-format
msgid "Install system"
msgstr "இயக்கத்ைத நிறுவுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Choose packages to install"
msgstr "நிறுவ வேண்டிய பொதிகளை தேர்வுச் செய்யுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Format partitions"
msgstr "வகிர்களை வடிவூட்டுங்கள்"

#: ../../steps.pm:1
#, fuzzy, c-format
msgid "Partitioning"
msgstr "அச்சு மேலாளர்"

#: ../../steps.pm:1
#, c-format
msgid "Choose your keyboard"
msgstr "உங்கள் விசைப்பலகை இட அமைவை தேர்வுச் செய்யுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "Select installation class"
msgstr "நிறுவல் வகையைத் தேர்வுச் செய்க"

#: ../../steps.pm:1
#, c-format
msgid "Hard drive detection"
msgstr "வன்தட்டு கண்டுபிடித்தல்"

#: ../../steps.pm:1
#, c-format
msgid "Configure mouse"
msgstr "எலியை வடிவமையுங்கள்"

#: ../../steps.pm:1
#, c-format
msgid "License"
msgstr ""

#: ../../steps.pm:1
#, c-format
msgid "Choose your language"
msgstr "உங்கள் மொழியைத்  தேர்வுச் செய்க"

#: ../../ugtk2.pm:1
#, c-format
msgid "utopia 25"
msgstr ""

#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
#, fuzzy, c-format
msgid "logdrake"
msgstr "பட்டிதொகுப்பாளர்"

#: ../../ugtk.pm:1
#, c-format
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr ""
"-unknown-tsc_avarangal-medium-r-normal--0-0-0-0-p-0-adobe-fontspecific,*-r-*"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac(காட்சியமைப்பு அட்ைடயின் இயக்க நிரல்)"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"உங்களுக்கு 3D வன்பொருள் முடுக்கத்துடன் X %s ஆராய்ச்சி முறையில்  கிடைக்கும் ஆனால் இது உங்கள் "
"கணினியை செயலிழக்கச் செய்யலாம்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "உங்களுக்கு 3D வன்பொருள் முடுக்கத்துடன்  X %s ஆராய்ச்சி முறையில்  கிடைக்கும்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr "உங்களுக்கு 3D வன்பொருள் முடுக்கத்துடன்  X %s கிடைக்கும்"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "வன்பொருள் முடுக்கத்துடன் கூடிய 3D X- %s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"உங்களுக்கு 3D வன்பொருள்  முடுக்கத்துடன் X %s ஆராய்ச்சி முறையில்  கிடைக்கும் ஆனால் இது "
"உங்கள் கணினியை செயலிழக்கச் செய்யலாம்\n"
"X %s ல்  சிறந்த 2D செயல்திறன் கிடைக்கலாம். தமிழ் சரியாக இயங்க 4 க்கு மேல் பயன்படுத்து"

#: ../../Xconfig/card.pm:1
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"உங்களுக்கு 3D வன்பொருள் முடுக்கத்துடன் வசதிகள் X %s மட்டும் தான் கிடைக்கும். ஆனால் \n"
"X %s ல்  சிறந்த 2D செயல்திறன் கிடைக்கலாம். தமிழ் சரியாக இயங்க 4 க்கு மேல் பயன்படுத்து"

#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
#, c-format
msgid "XFree %s"
msgstr "X- %s"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "\"%s\"%s என்ற அட்ைடயை மட்டும்  வடிவமைக்கவும்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Use Xinerama extension"
msgstr "சினிராமா நீட்டிப்புகளை பயன்படுத்தவும்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Configure all heads independently"
msgstr "அனைத்து திரைகளையும் தனித்தனியாக வடிவமைக்கவும்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "எவ்வித X வடிவமைப்ேபா வைத்துக்ெகாள்ள விரும்புகிறீர்கள்?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "XFree configuration"
msgstr "X வடிவமைப்பு"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "உங்கள் காட்சியமைப்பு அட்ைடயின் நினைவகத்தின் அளவைத் தேர்ந்ெதடுங்கள்"

#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"உங்கள் கணினி அமைப்பு பல்திரையக வடிவமைப்பில் வேலைச் செய்யும்\n"
"நீங்கள் என்ன செய்ய விரும்புகிறீர்கள்?"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "Multi-head configuration"
msgstr "பல்திரையக வடிவமைப்பு"

#: ../../Xconfig/card.pm:1
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "X-பரிமாறியைத் தேர்வு செய்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "X server"
msgstr "X-பரிமாறி"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "64 MB or more"
msgstr "64 MB மெகாபைட் அல்லது அதற்கு அதிகமாக"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "32 MB"
msgstr "32 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "16 MB"
msgstr "16 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "8 MB"
msgstr "8 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "4 MB"
msgstr "4 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "2 MB"
msgstr "2 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "1 MB"
msgstr "1 MB மெகாபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "512 kB"
msgstr "512 kB கிலோபைட்"

#: ../../Xconfig/card.pm:1
#, c-format
msgid "256 kB"
msgstr "256 kB கிலோபைட்"

#: ../../Xconfig/main.pm:1
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"இந்த மாற்றங்களை அப்படியே வைத்துக்ெகாள்கிறீர்களா?\n"
"தற்போதைய வடிவமைப்பு\n"
"\n"
"%s"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Options"
msgstr "விருப்பத்ேதர்வுகள்"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Test"
msgstr "சோதனை"

#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolution"
msgstr "பரிமாணங்கள்"

#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
#, c-format
msgid "Monitor"
msgstr "திரையகம்"

#: ../../Xconfig/main.pm:1
#, c-format
msgid "Graphic Card"
msgstr "காட்சியமைப்பு அட்ைட"

#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
#: ../../printer/printerdrake.pm:1 ../../standalone/drakperm:1
#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
#, c-format
msgid "Quit"
msgstr "வெளிச்செல்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Vertical refresh rate"
msgstr "செங்குத்தான புதுக்கல் வீதம்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Horizontal refresh rate"
msgstr "கிடையான புதுக்கல் வீதம்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"இங்கு நீங்கள் செய்யும் மாற்றங்கள் உங்கள் திரையகத்ைத முற்றிலும் செயலிழக்கச் செய்து விடலாம். \n"
"உங்களுக்கு வன்பொருள் பற்றி தெரிந்து இருந்தால் மட்டுமே இங்குள்ளதை \n"
"மாற்றுங்கள். \n"
"\n"
"திரையகத்தின் ஒத்தியக்க அளவுகளை சிந்தித்து தேர்வுச் செய்யுங்கள்\n"
"\n"
"எப்ேபாதும் சிறிய வீச்சுகளையே தேர்வுச் செய்யுங்கள் \n"
"தவறான ஒத்தியக்க அளவுகளை தேர்வுச் செய்தால்  திரையகம் முற்றிலும் செயலிழந்து போகலாம்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"தானாக தேடிய முறை வெற்றிபெறவில்ைல.தயவுசெய்து சரியான  திரையகத்ைத.தேர்ந்ெதடுக்கவும்"

#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Vendor"
msgstr "விற்பவர்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play -1997 க்கு பிறகு வந்த திரையகங்கள் இவ்வகையைச் சேரும்"

#: ../../Xconfig/monitor.pm:1
#, c-format
msgid "Choose a monitor"
msgstr "திரையகத்ைத தேர்வுச் செய்"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Graphics card: %s"
msgstr "காட்சியமைப்பு அட்ைட: %s"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "உங்களுக்கு விருப்பமான பரிமாணங்களையும், ஆழங்களையும் தேர்ந்ெதடுங்கள்"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "Resolutions"
msgstr "பரிமாணங்கள்"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 பில்லியன் வண்ணங்கள் (32 பிட்டுகள்)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 மில்லியன் வண்ணங்கள் (24 பிட்டுகள்)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65000 வண்ணங்கள் (16 பிட்டுகள்)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32000 வண்ணங்கள் (15 பிட்டுகள்)"

#: ../../Xconfig/resolution_and_depth.pm:1
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 வண்ணங்கள் (8 பிட்டுகள்)"

#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "இது சரியா?"

#: ../../Xconfig/test.pm:1
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d விநாடிகள்"

#: ../../Xconfig/test.pm:1
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "எச்சரிக்ைக; காட்சியமைப்பு அட்ைடயை சோதிப்பது உங்கள் கணினியை முடமாக்கும்"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Do you want to test the configuration?"
msgstr "உங்கள் வடிவமைப்ேபா சோதித்து பார்க்க வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]"

#: ../../Xconfig/test.pm:1
#, c-format
msgid "Test of the configuration"
msgstr "வடிவமைப்பு சோதித்து பார்க்கப்படுகிறது"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "What norm is your TV using?"
msgstr "உங்கள் டிவி எந்த செந்தர வரையேட்டின் கீழ் வருகிறது?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"உங்கள் காட்சியமைப்பு அட்ைடயில் டிவிக்கான இடைமுகம் உள்ளது.\n"
"தொலைப்புழங்கி மூலம் இதனை வடிவமைக்கலாம்.\n"
".\n"
"இது சரியாக வேலைச் செய்ய நீங்கள் கணினி துவங்குமுன்பே உங்கள் டிவியுடன் இனைத்திருக்க "
"வேண்டும்\n"
"துவங்குநிரலில் டிவி-வழி என்பதை தேர்வுச் செய்தால் டிவியில் பார்க்கலாம்\n"
"\n"
"நீங்கள் இதனை பயன் படுத்தப் போகிறீர்களா?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"என்னால் உங்கள் கணினியை துவங்கும் போது வரைவியல்வழியில் துவக்க முடியும்.\n"
"ஒவ்வொரு முறை கணினி துவங்கும்போதும் X துவங்கட்டுமா?"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphical interface at startup"
msgstr "துவங்கும் போது வரைவியல்வழியில் துவங்குக"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "X பரிமாறியின் இயக்கு நிரல் %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "XFree86 server: %s\n"
msgstr "X பரிமாறி: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Resolution: %s\n"
msgstr "பரிமாணம்: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Color depth: %s\n"
msgstr "வண்ணங்களின் ஆழம்: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "காட்சியமைப்பு அட்ைடயின் நினைவக அளவு: %s kB\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Graphics card: %s\n"
msgstr "காட்சியமைப்பு அட்ைட %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "திரையகத்தின் செங்குத்து ஒத்தியக்கம் %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "திரையகத்தின் கிடையான ஒத்தியக்கம் %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Monitor: %s\n"
msgstr "திரையகம்: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse device: %s\n"
msgstr "எலியின் வகை: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Mouse type: %s\n"
msgstr "எலியின் வகை: %s\n"

#: ../../Xconfig/various.pm:1
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "விசைப்பலகையின் இட அமைவு %s\n"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Options: %s"
msgstr "விருப்பத்ேதர்வுகள்: %s"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount point: "
msgstr "ஏற்றப் புள்ளி: "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server: "
msgstr "சேவையகம்: "

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL எப்ேபாதும் http:// அல்லது https:// எனத் தொடங்கவேண்டும்"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "தயவுச்செய்து சேவையகத்தின் URL அடிக்கவும்"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount point"
msgstr "ஏற்றப் புள்ளி"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "Server"
msgstr "சேவையகம்"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Mount"
msgstr "ஏற்று"

#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Unmount"
msgstr "இறக்கு"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid "New"
msgstr "புதிய"

#: ../../diskdrake/dav.pm:1
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``%s'' instead"
msgstr "பதிலாக  ``%s'' ஐ பயன்படுத்து"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Type"
msgstr "வகை: "

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Use ``Unmount'' first"
msgstr "முதலில்  இறக்கு கட்டளையை  பயன்படுத்து"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Delete"
msgstr "நீக்கு"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create"
msgstr "உருவாக்கு"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Filesystem types:"
msgstr "கோப்பமைப்பு வகைகள்:"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Empty"
msgstr "ஒன்றுமில்ைல"

#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
msgid "Windows"
msgstr "வின்டோஸ் களம்"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "HFS"
msgstr "HFS கோப்பமைப்பு"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "SunOS"
msgstr "சன்இயக்கநிரல்"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Swap"
msgstr "இடமாற்று"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Journalised FS"
msgstr "தாளிகையான கோப்பமைப்பு"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Ext2"
msgstr "Ext2 கோப்பமைப்பு"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "No hard drives found"
msgstr "வன்தட்டு ஏதும் காணப்படவில்ைல"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please click on a partition"
msgstr "தயவுசெய்து வகிர் ஒன்றை தேர்ந்ெதடுக்கவும்"

#: ../../diskdrake/hd_gtk.pm:1
#, fuzzy, c-format
msgid ""
"You have one big MicroSoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"உங்கள் வின்டோஸ் வகிர்\n"
"மிகப்ெபரியதாக உள்ளது .\n"
"அதை நீங்கள் மாற்றியமைக்க நான் அறிவுருத்துவேன்\n"
"(\"மாற்றியமை\" என்பதன் மீது கிளிக் செய்)"

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Choose action"
msgstr "இயக்கத்ைத தேர்வுச் செய் "

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Wizard"
msgstr "மாயாவி... "

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr "எதொடங்கல் "

#: ../../diskdrake/hd_gtk.pm:1
#, c-format
msgid "Please make a backup of your data first"
msgstr "தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும்"

#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read carefully!"
msgstr "கவனமாக படிக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key (again)"
msgstr "மறைக்குறியீட்டுச் சாவி(மீண்டும்)"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Encryption key"
msgstr "மறைக்குறியீட்டுச் சாவி"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The encryption keys do not match"
msgstr "மறைக்குறியீட்டுச் சாவிகள் இரண்டும் ஒன்றாக இல்ைல"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "இந்த மறைக்குறியீட்டுச் சாவி மிக எளிதாக உள்ளது  %d அளவு இருக்கவேண்டும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "உங்கள் கோப்பமைப்புக்கு மறைக்குறியீட்டுச் சாவியை தேர்வுச் செய்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem encryption key"
msgstr "கோப்பமைப்பு மறைக்குறியீட்டுச் சாவி"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Type: "
msgstr "வகை: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "on channel %d id %d\n"
msgstr "%d தடத்தில் %d உள்ளது\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table type: %s\n"
msgstr "வகிர் அமைப்பின் வகை: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-தட்டுகள்%s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Info: "
msgstr "தகவல்: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "கோனங்கள்: %s உருளைகள், %s தலைகள், %s விற்கள்\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s\n"
msgstr "அளவு: %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Read-only"
msgstr "படிப்பதற்கு மட்டும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Device: "
msgstr "சாதனம்: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"இந்த வகிர் உங்கள்\n"
"கணினி இரண்டு இயக்க நிரல்களும் துவங்க\n"
"தேவை\n"

#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"இந்த வகிர்\n"
"முக்கியமானது\n"
"இதை ஒன்றும் செய்யாதீர்கள்\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: %s"
msgstr "கண்ணி கோப்பின் பெயர்: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-வட்டிகள் %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Chunk size %s\n"
msgstr "வெட்டு அளவு%s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Level %s\n"
msgstr "நிலை %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"கொடாநிலையாக தொடங்கிய வகிர்\n"
".\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"கண்ணி கோப்பு:\n"
"   %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mounted\n"
msgstr "ஏற்றப்பட்டுள்ளது\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Not formatted\n"
msgstr "வடிவூட்டப்பட்டவில்ைல\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Formatted\n"
msgstr "வடிவூட்டப்பட்டது\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "%d முதல்  %d வரை உள்ள உருளைகள்\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ", %s sectors"
msgstr ", %s வில்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size: %s"
msgstr "அளவு: %s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start: sector %s\n"
msgstr "ஆரம்பவில் %s\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Name: "
msgstr "கணினியின்பெயர்:  "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ": %s டாஸ் இயக்கி எண்\n"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "partition %s is now known as %s"
msgstr "%s வகிர் இப்ேபாது %s என வழங்கப்படுகிறது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removing %s"
msgstr "%s நீக்கப்படுகிறது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Copying %s"
msgstr "%s நகலெடுக்கபடுகிறது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving files to the new partition"
msgstr "கோப்புகளை வேறு வகிர் ஒன்றுக்கு மாற்றப்படுகிறது "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"%s\n"
"%s"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hide files"
msgstr "கோப்புகளை மறைக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move files to the new partition"
msgstr "கோப்புகளை வேறு வகிர் ஒன்றுக்கு மாற்றவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும் %s வடிவூட்டிய பிறகு "
"அனைத்து விவரங்களையும் இழந்து விடுவீர்கள்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "நீங்கள் செய்த மாற்றங்கள் வேலை செய்ய மறு தொடக்கம் தேவை"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "%s வட்டின் வகிர் அமைப்பு தட்டில் எழுதப்படவுள்ளது"

#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"உங்கள்  root (/) வகிர்  RAID வகையில் உள்ளது.நீங்கள் லிலோ பயன்படுத்தினால் அது வேலை "
"செய்ய. /boot தேவை. அதனால்  /boot உருவாக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"root (/) வகிர் 1024 உருளைக்கு மேல் உருவாக்கி உள்ளேன்.\n"
"நீங்கள் லிலோ பயன்படுத்தினால் அது வேலை செய்ய. /boot தேவை. அதனால்  /boot உருவாக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"மன்னிக்கவும்,  /boot 1024 உருளைக்கு மேல் உருவாக்க மாட்டேன்.\n"
"நீங்கள் லிலோ பயன்படுத்தினால் அது வேலை செய்யாது. அல்லது நீங்கள் லிலோ பயன்படுத்தாவிட்டால் /"
"boot உங்களுக்கு தேவையில்ைல"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "%s என்ற பொதி நிறுவப்படவேண்டும். ஓப்புதல் தரவும்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "What type of partitioning?"
msgstr "எந்த வகை வகிர்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "இந்த செயல் அபாயகரமானது. கவனமாக இருக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "chunk size"
msgstr "அளவு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "level"
msgstr "நிலை"

#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
#, c-format
msgid "device"
msgstr "சாதனம்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Various"
msgstr "வேறு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Mount options"
msgstr "ஏற்ற விருப்பத்ேதர்வுகள்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "File already exists. Use it?"
msgstr "இந்த கோப்பு ஏற்கனவே உள்ளது. பயன்பாடுத்தி கொள்ளலாமா?"

#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "இந்த பெயர் பயன்பாட்டில் உள்ளது, வேறு பெயர்  கொடுக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Give a file name"
msgstr "கோப்பிற்கு பெயர் கொடுக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Filesystem type: "
msgstr "கோப்பமைப்பு வகை: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Size in MB: "
msgstr "மெகாபைட்டில் அளவு: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback file name: "
msgstr "கண்ணி கோப்பின் பெயர்: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Loopback"
msgstr "கண்ணி"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition can't be used for loopback"
msgstr "இந்த வகிர் கண்ணியாக பயன்ழடுத்த முடியாது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "LVM name?"
msgstr "LVM  பெயர்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "new"
msgstr "புதிய"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "ஏற்கனவே இருக்கும் LVM உடன் சேர்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "ஏற்கனவே இருக்கும் RAID உடன் சேர்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving partition..."
msgstr "வகிர்கள் மாற்றப்படுகிறது ..."

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Moving"
msgstr "மாற்றப்படுகிறது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "நீங்கள் எந்த வில்லிற்கு மாற்ற போகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Sector"
msgstr "வில்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "நீங்கள் எந்த வட்டிற்கு மாற்ற போகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Move"
msgstr "நகர்த்து"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "New size in MB: "
msgstr "புதிய அளவை மெகா பைட்டில் : "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose the new size"
msgstr "புதிய அளவை தேர்வுச் செய்யவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Resize"
msgstr "மாற்றியமை "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "%s, மாற்றியமைத்த பிறகு அனைத்ைதயும் அழித்து விடும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "தயவுசெய்து உங்களுக்கு தேவையான அனைத்ைதயும் காப்ெபடுத்துக்ெகாள்ளவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "This partition is not resizeable"
msgstr "இந்த வகிர் மாற்றியமைக்கப்பட முடியாதது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "FAT கோப்பமைப்பு அளவுகள் அளக்கப்படுகின்றன"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount %s?"
msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"ஏற்கனவே பயனீட்டில் உள்ளதால் ஏற்றப்புள்ளியை பயன்படுத்த முடியாது.\n"
"முதலில் கண்ணியின் கோப்ேபா நீக்குங்கள்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "உங்கள் %s வட்ைட எங்கு ஏற்ற விரும்புகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "உங்கள் கண்ணி கோப்பு %s எங்கு ஏற்ற  விரும்புகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "ext2 யிலிருந்து ext3 கோப்பமைப்பிற்கு மாறுகிறது"

#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
#, c-format
msgid "Which filesystem do you want?"
msgstr "நீங்கள் எந்த கோப்பமைப்ேபா பயன்படுத்த போகிறீர்கள்?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Change partition type"
msgstr "வகிர் வகையை மாற்று: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr " %s, என்ற வகிர் அதன் வகையை மாற்றியவுடன், அதலிருந்த தகவல் அனைத்ைதயும் இழந்துவிடும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove the loopback file?"
msgstr "கண்ணியின் கோப்ேபா நீக்கவா?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"வகிர் ஒன்றை உருவாக்க முடியாது\n"
"அதிகபட்ச தொடக்க வகிர் ஏற்கனவே உள்ளது.\n"
"ஒரு தொடக்க வகிர் ஒன்றை நீக்கி விட்டு நீட்டிப்பு வகிர் ஒன்றை உருவாக்குங்கள்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Preference: "
msgstr "விருப்பங்கள்: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Start sector: "
msgstr "ஆரம்ப வில்: "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Create a new partition"
msgstr "வகிர் ஒன்றை உருவாக்ககு "

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Use for loopback"
msgstr "கண்ணியாக பயன்படு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Modify RAID"
msgstr "RAID மாற்று"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from LVM"
msgstr "LVM இருந்து நீக்கு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Remove from RAID"
msgstr "RAID இருந்து நீக்கு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to LVM"
msgstr "LVM உடன் சேர்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Add to RAID"
msgstr "RAID உடன் சேர்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Format"
msgstr "வடிவூட்டு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Detailed information"
msgstr "விரிவான தகவல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Trying to rescue partition table"
msgstr "தட்டின் வகிர் அமைப்புகளை மீட்க முயல்கிறேன்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"நெகிழ்தட்ைட செருகுங்கள்\n"
"இந்த தட்டில் இருக்கும் தகவலனைத்ம் அழிந்துவிடும்"

#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
#: ../../network/modem.pm:1
#, c-format
msgid "Warning"
msgstr "எச்சரிக்ைக"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Select file"
msgstr "கோப்ேபா தேர்வுச் செய்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"காப்பில் உள்ள தட்டின் வகிர் அமைப்பின் அளவு வேறாக உள்ளது\n"
"தொடர்ந்து` செல்லலாமா?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Removable media automounting"
msgstr "கழற்று ஊடகங்கள் தானேற்றம்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Reload partition table"
msgstr "தட்டின் வகிர் அமைப்புகளை புதுக்கல் செய்யவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Rescue partition table"
msgstr "தட்டின் வகிர் அமைப்புகளை மீட்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Restore partition table"
msgstr "தட்டின் வகிர் அமைப்புகளை பழைய நிலைக்கு கொண்டு வாருங்கள்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Save partition table"
msgstr "மாற்றங்களை தட்டில் சேமிக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"மேலும் வகிர் எதனையும் சேர்க்க வேண்டுமானால், தொடக்க வகிர் ஒன்றை நீக்கி விட்டு புதிய "
"நீட்டிப்பு வகிர் ஒன்றை உருவாக்கவும்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "I can't add any more partition"
msgstr "இதற்கு மேல் வகிர் எதனையும் சேர்க்க முடியாது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "All primary partitions are used"
msgstr "தொடக்க வகிர் அனைத்தும் பயஙனபாட்டில் உள்ளது"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Hard drive information"
msgstr "வன்தட்ைட பற்றிய தகவல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Auto allocate"
msgstr "தானியக்க வகுத்தல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Clear all"
msgstr "அனைத்ைதயும் மாற்றியமை"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr " /etc/fstab மாற்றங்களை தட்டில் சேமிக்க வேண்டுமா"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without writing the partition table?"
msgstr "மாற்றங்களை தட்டில் சேமிக்காமல் வெளிச்செல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Quit without saving"
msgstr "சேமிக்காமல் வெளிச்செல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Continue anyway?"
msgstr "எப்படியும் தொடரவதா?"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to expert mode"
msgstr "அறிஞர் முறைமைக்கு மாறு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Toggle to normal mode"
msgstr "சாதாரனர் முறைமைக்கு மாறு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Undo"
msgstr "செயல்நீக்கு"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Exit"
msgstr "வெளிச்செல்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose a partition"
msgstr "வகிர் ஒன்றை தேர்வுச் செய்"

#: ../../diskdrake/interactive.pm:1
#, c-format
msgid "Choose another partition"
msgstr "வேறு வகிர் ஒன்றை தேர்வுச் செய் "

#: ../../diskdrake/removable.pm:1
#, c-format
msgid "Change type"
msgstr "வகையை மாற்று"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Search servers"
msgstr "சேவையகத்ைத தேடு"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain"
msgstr "வின்களம்"

#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
#, c-format
msgid "Username"
msgstr "பயனர்பெயர்"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr "தயவுசெய்து உங்கள் பயனர்பெயர், கடவுச்ெசால், வின்களம் ஆகியவற்றை தட்டவும்"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Domain Authentication Required"
msgstr "வின்கள நல்குரிமை வேண்டும்"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Another one"
msgstr "மற்றொன்று"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Which username"
msgstr "எந்த பயனர்பெயர்"

#: ../../diskdrake/smbnfs_gtk.pm:1
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "பயனர்பெயர் %s தொடங்க முடியவில்ைல(தவறான கடவுச்ெசால்?)"

#: ../../harddrake/data.pm:1
#, c-format
msgid "cpu # "
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "SMBus controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "USB controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "SCSI controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Joystick"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Scanner"
msgstr "வருடியை தேர்வுச் செய்யுங்கள்"

#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "பொதுவின திரையகம்"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Modem"
msgstr "வகை"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "வலையமைப்பு அட்ைட"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Processors"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "Webcam"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Soundcard"
msgstr "ஒலியட்ைட"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "எதிரியல்"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Tvcard"
msgstr "TV அட்ைட"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Videocard"
msgstr "ஒளித்ேதற்ற முறைமை"

#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
#, fuzzy, c-format
msgid "Tape"
msgstr "வகை:"

#: ../../harddrake/data.pm:1
#, c-format
msgid "DVD-ROM"
msgstr ""

#: ../../harddrake/data.pm:1
#, c-format
msgid "CD/DVD burners"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "CDROM"
msgstr "சிடிஏற்றம்/இறக்கம்"

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Disk"
msgstr "டச்சு"

#: ../../harddrake/data.pm:1
#, c-format
msgid "Zip"
msgstr ""

#: ../../harddrake/data.pm:1
#, fuzzy, c-format
msgid "Floppy"
msgstr "துவங்கல் வட்டு"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Driver:"
msgstr "இயக்கநிரல்:"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Choosing an arbitratry driver"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
"by default\n"
"\n"
"- \"grep snd-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "உங்கள் ஒலியட்ைடக்கு (%s) இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Unkown driver"
msgstr "தெரியாத இயக்க நிரல்"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "உங்கள் ஒலியட்ைடக்கு (%s) இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No known driver"
msgstr "இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr "உங்கள் ஒலியட்ைடக்கு (%s) மாற்று இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid "No open source driver"
msgstr "இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "தயவுசெய்து காத்திருக்கவும்...செயல்படுத்தப்படுகிறது"

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Trouble shooting"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: ../../harddrake/sound.pm:1
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr "உங்கள் ஒலியட்ைடக்கு (%s) மாற்று இயக்கநிரலை இங்கு தேர்வு செய்யலாம்"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "Sound configuration"
msgstr "ஒலி வடிவமைப்பு"

#: ../../harddrake/sound.pm:1
#, fuzzy, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr "உங்கள் ஒலியட்ைடக்கு (%s) மாற்று இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/sound.pm:1
#, c-format
msgid "No alternative driver"
msgstr "மாற்று இயக்கநிரல் ஏதுமில்ைல"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "enable radio support"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Radio support:"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "PLL setting:"
msgstr "PLL அமைப்புக்கள்"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Tuner type:"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Card model:"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|Generic"
msgstr "பொதுவின திரையகம்"

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm:1
#, c-format
msgid "Auto-detect"
msgstr "தானியக்க-கண்டுபிடித்தல்"

#: ../../interactive/newt.pm:1
#, fuzzy, c-format
msgid "Do"
msgstr "முடிந்தது"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default %s) "
msgstr "உங்கள் தேர்வு? (கொடாநிலை %s) "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Bad choice, try again\n"
msgstr "தவறான தேர்வு, மீண்டும் முயற்சித்து பார்க்கவும்\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Re-submit"
msgstr "மறு வைத்தல்"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> கவனிக்கவும், பெயர் மாறியுள்ளது\n"
"%s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"தயவுசெய்து நீங்கள் விரும்பும் 10-வீச்சின் முதல் எண்ணை தேர்வுச் செய்,\n"
"அல்லது நுழைவு சாவியை தட்டி தொடரவும்\n"
"உங்கள் தேர்வு? "

#: ../../interactive/stdio.pm:1
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> தேர்வுச் செய்வதற்கு பல உள்ளன(%s).\n"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "உங்கள் தேர்வு? (கொடாநிலை `%s'%s)"

#: ../../interactive/stdio.pm:1
#, c-format
msgid " enter `void' for void entry"
msgstr "enter `void' for void entry"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Do you want to click on this button?"
msgstr "உங்கள் இந்த பொத்தானை கிளிக் செய்ய வேண்டுமா?"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Button `%s': %s"
msgstr "பொத்தான் %s: %s"

#: ../../interactive/stdio.pm:1
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr ",உங்கள் தேர்வு? (0/1 கொடாநிலை %s)"

#: ../../interactive/stdio.pm:1
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"நீங்கள் நிரப்ப வேண்டியவை \n"
"%s"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"%s என்ற இயக்க நிரல் ஏற்றத்தில் பிழை நேர்ந்துள்ளது\n"
"நீங்கள் வேறு விருப்பத்ேதர்வுகளை தெரிவித்து பார்க்கவும்"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Specify options"
msgstr "விருப்பத்ேதர்வு தெரிவிக்கவும்"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Autoprobe"
msgstr "தன்னியக்கத் தேடியறிதல்"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"இந்த %s க்கு எந்த இயக்க நிரலை பயன்படுத்த சில\n"
"அதிக விவரங்கள் தேவை. இதை நீங்கள் தருகிறீர்களாஅல்லது \n"
"டிரேக்x தன்னியக்கத் தேடியறிதல் செய்யட்டுமா\n"
"இது எப்ேபாதாவது உங்கள் கணினி தொங்கல் நிலைக்கு இட்டுச் செல்லலாம்\n"
"ஆனால் எதனையும் செயலிழக்கச் செய்யாது"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../modules/interactive.pm:1
#, c-format
msgid "Which %s driver should I try?"
msgstr "இந்த %s க்கு எந்த இயக்க நிரலை பயன்படுத்த வேண்டும்?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Module options:"
msgstr "கூறு அமைப்புகள்"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"%s.கூறுக்கான விருப்பத்ேதர்வுகளை தாருங்கள்\n"
"பெயர்=மதிப்பு என்ற அமைப்பில் இருக்கவேண்டும்...''.\n"
"உதாரனத்திற்கு , ``io=0x300 irq=7''"

#: ../../modules/interactive.pm:1
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"%s.கூறுக்கான விருப்பத்ேதர்வுகளை தாருங்கள்\n"
"0x like '0x123' போன்ற துவக்கத்துடன் அது இருக்கவேண்டும்"

#: ../../modules/interactive.pm:1
#, c-format
msgid "(module %s)"
msgstr "(%s கூறு)"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../modules/interactive.pm:1
#, c-format
msgid "Installing driver for %s card %s"
msgstr "%s அட்ைட %s க்கு இயக்கு நிரல் நிறுவப்படுகிறது"

#: ../../modules/interactive.pm:1
#, c-format
msgid "See hardware info"
msgstr "வன்பொருட்களின் விவரங்களைப் பாருங்கள்"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "நீங்கள் %s இடைமுக அட்ைடகள் ஏதேனும் பயன்படுத்துகிறிர்களா?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Do you have another one?"
msgstr "மேலும்  உள்ளனவா?"

#: ../../modules/interactive.pm:1
#, c-format
msgid "Found %s %s interfaces"
msgstr "%s %s இடைமுக அட்ைடகள் உள்ளன"

#: ../../modules/interactive.pm:1
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "கூற்றை நீங்கள் இங்கே வடிவமைக்கலாம்"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated strings"
msgstr "கமாவால் பிரிக்கப்பட்ட சரங்கள்"

#: ../../modules/parameters.pm:1
#, c-format
msgid "comma separated numbers"
msgstr "கமாவால் பிரிக்கப்பட்ட எண்கள்"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated strings"
msgstr "%d, கமாவால் பிரிக்கப்பட்ட சரங்கள்"

#: ../../modules/parameters.pm:1
#, c-format
msgid "%d comma separated numbers"
msgstr "%d, கமாவால் பிரிக்கப்பட்ட எண்கள்"

#: ../../modules/parameters.pm:1
#, c-format
msgid "a number"
msgstr "ஒரு எண்"

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: ../../network/adsl.pm:1
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"பொதுவாக adsl மூலம் இணையத்ேதடு தொடர்பு ஏற்படுத்த.\n"
"pppoe பயன்படுத்தப்படும்.வெகு சில dhcp பயன்படுத்தும்\n"
"உங்களுக்கு சரியாக தெரியவில்ைல என்றால் pppoe பயன்படுத்து"

#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
#, c-format
msgid "Connect to the Internet"
msgstr "இணையத்ைத பயன்படுத்த தொடர்பு ஏற்படுத்து"

#: ../../network/adsl.pm:1
#, c-format
msgid "Sagem (using pppoe) usb"
msgstr ""

#: ../../network/adsl.pm:1
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "அல்காடெல் ஸ்பிட்டச் -Alcatel speedtouch usb"

#: ../../network/adsl.pm:1
#, c-format
msgid "use dhcp"
msgstr "dhcp  பயன்படுத்து"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pptp"
msgstr "pptp பயன்படுத்து"

#: ../../network/adsl.pm:1
#, c-format
msgid "use pppoe"
msgstr " pppoe பயன்படுத்து"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Other ports"
msgstr "மற்ற துறைகளை"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "நிங்கள் எந்த சேவைகளை இணையத்திலிருந்து அனுமதிக்க விரும்புகிறீர்கள்?"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: ../../network/drakfirewall.pm:1
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"நெருப்புச்சுவர் வடிவமைப்பு\n"
"\n"
"இங்கு அளிக்கப்படும் பதில்கள் உங்கள் கணினியின்\n"
"பாதுகாப்பு சார்ந்தது. கவணம் தேவை\n"
"நீங்கள் இந்த நிரலை எப்ேபாது வேண்டுமானாலும் இயக்கலாம்\n"
"."

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "No network card"
msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல "

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "POP and IMAP Server"
msgstr "POP and IMAP வகை மின்னஞ்சல் சேவையகம்"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Mail Server"
msgstr "மின்னஞ்சல் சேவையகம்"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Domain Name Server"
msgstr "DNS சேவையகம்"

#: ../../network/drakfirewall.pm:1
#, c-format
msgid "Web Server"
msgstr "இணையத்தள சேவையகம்"

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "கணினிப்ெபயர்: "

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Host name"
msgstr "கணினிப்ெபயர்: "

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Enter a Zeroconf host name without any dot if you don't\n"
"want to use the default host name."
msgstr ""

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"உங்கள் தெரிந்தால் கணினியின் பெயரைத் தேர்வுச் செய்யவும்\n"
"சில DHCP-சேவையகங்களுக்கு கணினிப்ெபயர் தேவை\n"
"உங்கள் கணினிப்ெபயர் சரியானதாக இருக்க வேண்டும்\n"
"உதாரனம் ``mybox.mylab.myco.com''."

#: ../../network/ethernet.pm:1 ../../network/network.pm:1
#, c-format
msgid "Configuring network"
msgstr "வலையமைப்பாக்கங்கள் வடிவமைக்கப்படுகிறது"

#: ../../network/ethernet.pm:1
#, c-format
msgid "no network card found"
msgstr "வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "எந்த வலையமைப்பு அட்ைட உங்களை இணையத்துடன் இணைத்துள்ளது"

#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
#: ../../standalone/drakpxe:1
#, c-format
msgid "Choose the network interface"
msgstr "வலையமைப்பு அட்ைடயை தேர்வுச் செய்"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"வலையமைப்பு அட்ைட எதுவும் காணப்படவில்ைல.\n"
" என்னால் இது போன்ற இயக்கத்ைத வடிவமைக்க முடியாது"

#: ../../network/ethernet.pm:1
#, c-format
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcp-client."
msgstr ""
"நீங்கள் எந்த dhcp வேண்டியை பயன்படுத்த பொகிறீர்கள்?\n"
"கொடாநிலையாக dhcp-client பயன்படுத்தப்படும்"

#: ../../network/isdn.pm:1
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""

#: ../../network/isdn.pm:1
#, fuzzy, c-format
msgid "Which of the following is your ISDN card?"
msgstr "நீங்கள் எந்த ISDN அட்ைடயை பயன்படுத்துகிறீர்கள்?"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN  வலையமைப்பாக்க  வடிவமைப்பு"

#: ../../network/isdn.pm:1
#, c-format
msgid "Abort"
msgstr "முறித்து விடு"

#: ../../network/isdn.pm:1
#, c-format
msgid "Continue"
msgstr "தொடர்க"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "I don't know"
msgstr "எனக்கு தெரியாது"

#: ../../network/isdn.pm:1
#, c-format
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm:1
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind of card do you have?"
msgstr "எவ்வித அட்ைடயை வைத்துதிருக்கிறீர்கள்?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "Which protocol do you want to use?"
msgstr "நீங்கள் எந்த   வரைமுறையை பயன்படுத்த போகிறீர்கள்?"

#: ../../network/isdn.pm:1
#, c-format
msgid "Protocol for the rest of the world"
msgstr "ஏனைய பகுதிகளில் பயன்படுத்தப்படும் வரைமுறை"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"ஏனைய பகுதிகளில் பயன்படுத்தப்படும் வரைமுறை\n"
"No D-Channel (குத்தகை இணைப்புகள்)"

#: ../../network/isdn.pm:1
#, fuzzy, c-format
msgid "European protocol"
msgstr "ஐரோப்பிய வரைமுறை"

#: ../../network/isdn.pm:1
#, c-format
msgid "European protocol (EDSS1)"
msgstr "ஐரோப்பிய வரைமுறை(EDSS1)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"உங்கள் இணைய சேவையாளரைத் தேர்வுச் செய்.\n"
"இங்கு பட்டியலிடப்படவில்ைல என்றால், பட்டியலிடப்படவில்ைல என்பதை தேர்வுச் செய்யவும்"

#: ../../network/isdn.pm:1
#, c-format
msgid "External ISDN modem"
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "Internal ISDN card"
msgstr ""

#: ../../network/isdn.pm:1
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "உங்கள் ISDN  எந்த செந்தர வரையேட்டின் கீழ் வருகிறது?"

#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
#, c-format
msgid "Network Configuration Wizard"
msgstr "டிரேக்வலையமைப்பு மாயாவி"

#: ../../network/isdn.pm:1
#, c-format
msgid "Old configuration (isdn4net)"
msgstr "பழைய வடிவமைப்பு (isdn4net)"

#: ../../network/isdn.pm:1
#, c-format
msgid "New configuration (isdn-light)"
msgstr "புதிய வடிவமைப்பு (isdn-light அட்ைடகள்)"

#: ../../network/isdn.pm:1
#, c-format
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""

#: ../../network/modem.pm:1
#, fuzzy, c-format
msgid "Do nothing"
msgstr "பகிர்ேவதும் இல்ைல"

#: ../../network/modem.pm:1
#, fuzzy, c-format
msgid "Install rpm"
msgstr "நிறுவு"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""

#: ../../network/modem.pm:1
#, fuzzy, c-format
msgid "Title"
msgstr "அட்டவணை"

#: ../../network/modem.pm:1
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Second DNS Server (optional)"
msgstr "2வது DNS சேவையகத்தின் பெயர்"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "First DNS Server (optional)"
msgstr "முதல் DNS சேவையகத்தின் பெயர்"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Domain name"
msgstr "களத்தின் பெயர்"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Script-based"
msgstr "கட்டளைத்தொடர் வழியாக"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Terminal-based"
msgstr "முனையம் வழியாக"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "PAP"
msgstr "PAP-பொதுவாக நம்நாட்டில் இதுதான் உள்ளது"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Login ID"
msgstr "தொடங்கல்பெயர்"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Phone number"
msgstr "அழைக்க வேண்டிய தொலைபேசி எண்"

#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection name"
msgstr "தொடர்பின் பெயர்: "

#: ../../network/modem.pm:1
#, c-format
msgid "Dialup options"
msgstr "அழைப்பு வழி விருப்பத்ேதர்வுகள்"

#: ../../network/modem.pm:1
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "தயவுசெய்து, உங்கள் மோடம் இணைக்கப்பட்டுள்ள தொடர்நிலைத் துறையை தேர்வுச் செய்யுங்கள்"

#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
#, c-format
msgid "Network Configuration"
msgstr "வலையமைப்பாக்க  வடிவமைப்பு "

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"வாழ்த்துக்கள், உங்கள் வலையகமைப்பு மற்றும் இணையத் தொடர்பு\n"
"வெற்றிகரமாக முடிந்தது. இந்த வடிவமைப்புகள் பயன்படுத்தப்படும்\n"
"\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"வலையகமைப்புச் சேவைகள் மறுதொடங்கும்போது பிழை நேர்ந்துள்ளது \n"
"\n"
"%s"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "%s என்ற பொதி நிறுவப்படவேண்டும்.ஓப்புதல் தரவும்?"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Network configuration"
msgstr "வலையகமைப்பு வடிவமைப்பு "

#: ../../network/netconnect.pm:1
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "உங்கள் இணையத்தொடர்பை கணினி தொடங்கும்போதே தொடங்கவும்.? பொதுவாக இது தேவையில்ைல"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection"
msgstr "இணையத் தொடர்பு"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"நீங்கள் இணையத்தொடு பல முறைகளில் தொடர்புக் கொள்ள முடியும்\n"
"நீங்கள் பயன்படுத்த விரும்பும் முறையைத் தேர்ந்ெதடு\n"
"\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the connection you want to configure"
msgstr "உங்களுக்கு விருப்பமான இணைப்ேபா வடிவமைக்கவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ethernet card(s) detected"
msgstr "வலையமைப்பு அட்ைட(கள்) கண்டுபிடிக்கப்பட்டுள்ளது"

#: ../../network/netconnect.pm:1
#, c-format
msgid "LAN connection"
msgstr "LAN இஇணைப்பு"

#: ../../network/netconnect.pm:1
#, c-format
msgid "cable connection detected"
msgstr "கேபிள் இஇணைப்பு கண்டுபிடிக்கப்பட்டுள்ளது"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Cable connection"
msgstr "கேபிள் இஇணைப்பு"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "detected"
msgstr " %s  கண்டுபிடிக்கப்பட்டுள்ளது"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ADSL connection"
msgstr "ADSL இஇணைப்பு"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected %s"
msgstr " %s  கண்டுபிடிக்கப்பட்டுள்ளது"

#: ../../network/netconnect.pm:1
#, c-format
msgid "ISDN connection"
msgstr "ISDN இஇணைப்பு"

#: ../../network/netconnect.pm:1
#, fuzzy, c-format
msgid "Winmodem connection"
msgstr "சாதரன மோடம்வழி தொடர்பு"

#: ../../network/netconnect.pm:1
#, c-format
msgid "detected on port %s"
msgstr "%s என்ற துறையில் கண்டுபிடிக்கப்பட்டுள்ளது"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Normal modem connection"
msgstr "சாதரன மோடம்வழி தொடர்பு"

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Detecting devices..."
msgstr "சாதனங்கள் கண்டுபிடிக்கப்படுகிறது..."

#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
#, c-format
msgid "Expert Mode"
msgstr "அறிஞர் முறைமை"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Use auto detection"
msgstr "தானாக கண்டுபிடிக்கவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Choose the profile to configure"
msgstr "வடிவமைக்க பயனர்குறிப்ேபா தேர்வுச் செய்யவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"டிரேக்வலையமைப்பு மாயாவிக்கு வருக.\n"
"\n"
"இப்ேபாது உங்கள் இணைய/வலையமைப்பு வடிவமைக்கப்படுகிறது\n"
"தானாக கண்டுபிடிக்க வேண்டாமென்றால், இந்த தேர்வை நீக்கவும்.\n"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"நாம் தற்போது %s என்ற தொடர்பை வடிவமைக்கப்ேபாகிறோம்.\n"
"\n"
"\n"
"சரி என்பதை கிளிக் செய்யவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "நாம் தற்போது %s என்ற தொடர்பை வடிவமைக்கப்ேபாகிறோம்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Internet connection & configuration"
msgstr "இணையத்தொடர்பு  வடிவமைப்பாளன்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Configure the connection"
msgstr "இணையத்தொடர்பை வடிவமையுங்கள்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Disconnect"
msgstr "இணைப்ேபா துண்டிக்கவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "Connect"
msgstr "இணையவும்"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"நீங்கள் உங்கள் தொடர்பை  மறுவடிவமைக்கலாம்"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can connect to the Internet or reconfigure your connection."
msgstr ""
"\n"
"நீங்கள் உங்கள் தொடர்பை துண்டிக்கலாம், அல்லது மறுவடிவமைக்கலாம்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are not currently connected to the Internet."
msgstr "நீங்கள் தற்போது இணையத்ேதடு இணைந்து இல்ைல"

#: ../../network/netconnect.pm:1
#, c-format
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"நீங்கள் உங்கள் தொடர்பை துண்டிக்கலாம், அல்லது மறுவடிவமைக்கலாம்"

#: ../../network/netconnect.pm:1
#, c-format
msgid "You are currently connected to the Internet."
msgstr "நீங்கள் தற்போது இணையத்ேதடு இணைந்து உள்ளீர்கள்"

#: ../../network/network.pm:1
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URL எப்ேபாதும் 'http:' அல்லது 'ftp: யுடன் துவங்க வேண்டும்"

#: ../../network/network.pm:1
#, c-format
msgid "Proxy should be http://..."
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "FTP proxy"
msgstr "FTP பினாமி"

#: ../../network/network.pm:1
#, c-format
msgid "HTTP proxy"
msgstr "HTTP பினாமி"

#: ../../network/network.pm:1
#, c-format
msgid "Proxies configuration"
msgstr "பினாமி வடிவமைப்பு"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "Gateway device"
msgstr "நுழைவாயில் சாதனம்"

#: ../../network/network.pm:1
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "நுழைவாயில்(உதா. %s)"

#: ../../network/network.pm:1
#, c-format
msgid "DNS server"
msgstr "DNS சேவையகம்"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "Start at boot"
msgstr "தொடங்கலில்  துவக்கிவிடு "

#: ../../network/network.pm:1
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "வலையமைப்பாக்க  வடிவமைப்பு "

#: ../../network/network.pm:1
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "(bootp/dhcp/zeroconf)"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid "Automatic IP"
msgstr "தன்னியக்க IP"

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#: ../../standalone/drakgw:1
#, c-format
msgid "Netmask"
msgstr ""

#: ../../network/network.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "IP address"
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid " (driver %s)"
msgstr "(இயக்க நிரல் %s)"

#: ../../network/network.pm:1
#, c-format
msgid "Configuring network device %s"
msgstr "வலையமைப்பு அட்ைட %s வடிவமைக்கப்படுகிறது"

#: ../../network/network.pm:1
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""

#: ../../network/network.pm:1
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""

#: ../../network/shorewall.pm:1
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr "நெருப்புச்சுவர் வடிவமைப்பால் பிழை நேர்ந்துள்ளது"

#: ../../network/shorewall.pm:1
#, c-format
msgid "Firewalling configuration detected!"
msgstr "நெருப்புச்சுவர் வடிவமைப்பு காணப்பட்டுள்ளது"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Password"
msgstr "பயனரின் கடவுச்ெசால்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Account Login (user name)"
msgstr "பயனர் பெயர்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection timeout (in sec)"
msgstr "தொடர்பு வெளியேற்ற நேரம்(விநாடிகளில்): "

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Connection speed"
msgstr "தொடர்பு வேகம்: "

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Dialing mode"
msgstr "அழைக்கும் முறை"

#: ../../network/tools.pm:1
#, c-format
msgid "Choose your country"
msgstr "உங்கள் நாட்ைட தேர்வுச் செய்யுங்கள்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 2 (optional)"
msgstr "சேவையாளரின் dns2 சேவையகம்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider dns 1 (optional)"
msgstr "சேவையாளரின் dns1 சேவையகம்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider phone number"
msgstr "சேவையாளரின் தொலைபேசி எண்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "சேவையாளரின் பெயர்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Your personal phone number"
msgstr "உங்கள் தொலைபேசி எண்"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_1"
msgstr "அட்ைடயின் உள்/வெளி IO_1"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO_0"
msgstr "அட்ைடயின் உள்/வெளி IO_0"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IO"
msgstr "அட்ைடயின் உள்/வெளி IO"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card mem (DMA)"
msgstr ""

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Card IRQ"
msgstr "அட்ைடயின் IRQ"

#: ../../network/tools.pm:1
#, c-format
msgid "Please fill or check the field below"
msgstr ""

#: ../../network/tools.pm:1
#, c-format
msgid "Connection Configuration"
msgstr "இணையத்தொடர்பு  வடிவமைப்பாளன்"

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"\n"
"நீங்கள் உங்கள் தொடர்பை துண்டிக்கலாம், அல்லது மறுவடிவமைக்கலாம்"

#: ../../network/tools.pm:1
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr ""

#: ../../network/tools.pm:1
#, fuzzy, c-format
msgid "The system is now connected to the Internet."
msgstr "உங்கள் கணினி தற்போது இணையத்தில் இணைந்துள்ளது"

#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Testing your connection..."
msgstr "இணைப்பு சோதித்து பார்க்கப்படுகிறது"

#: ../../network/tools.pm:1
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "நீங்கள் இணையத்ேதடு தற்போது இணைய வேண்டுமா? [சோதித்து பார்ப்பது முக்கியம்]"

#: ../../network/tools.pm:1
#, c-format
msgid "Internet configuration"
msgstr "இணைய வடிவமைப்பு "

#: ../../partition_table/raw.pm:1
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""

#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid " (Default)"
msgstr " (கொடாநிலை)"

#: ../../printer/cups.pm:1
#, c-format
msgid "On CUPS server \"%s\""
msgstr ""

#: ../../printer/cups.pm:1 ../../printer/main.pm:1
#, c-format
msgid "Remote Printers"
msgstr "தொலைவு அச்சுப்ெபறி"

#: ../../printer/cups.pm:1 ../../printer/data.pm:1
#, c-format
msgid "CUPS"
msgstr ""

#: ../../printer/cups.pm:1
#, c-format
msgid "(on this machine)"
msgstr ""

#: ../../printer/cups.pm:1
#, c-format
msgid "(on %s)"
msgstr "(%s ல்)"

#: ../../printer/data.pm:1
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr ""

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng"
msgstr ""

#: ../../printer/data.pm:1
#, c-format
msgid "LPRng - LPR New Generation"
msgstr ""

#: ../../printer/data.pm:1
#, c-format
msgid "LPD"
msgstr "LPD-அச்சு செயலி"

#: ../../printer/data.pm:1
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr ""

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ"
msgstr "PDQ-அச்சு செயலியின் சாரம்"

#: ../../printer/data.pm:1
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr ""

#: ../../printer/detect.pm:1
#, c-format
msgid "Unknown Model"
msgstr "தெரியாத சாதனம்"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Unknown model"
msgstr "தெரியாத மாடல் "

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Host %s"
msgstr "கணினிப்ெபயர்: "

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid "Network %s"
msgstr "வலையமைப்பு"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Interface \"%s\""
msgstr " %s என்ற வலையமைப்பு அட்ைட"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "C-Class Local Network"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid ", using command %s"
msgstr ", %s என்ற கட்டளையை பயன்படுத்தி"

#: ../../printer/main.pm:1
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm:1
#, c-format
msgid ", printing to %s"
msgstr "%s க்கு அச்சிடப்படுகிறது"

#: ../../printer/main.pm:1
#, c-format
msgid ", multi-function device"
msgstr ", பலமுனை சாதனம் "

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", பலமுனை சாதனம் HP JetDirect துறையில் உள்ளது \\/*%s"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", multi-function device on USB"
msgstr ", பலமுனை சாதனம் USB துறையில் உள்ளது \\/*%s"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", multi-function device on parallel port \\#%s"
msgstr ", பலமுனை சாதனம் இணை துறையில் உள்ளது \\/*%s"

#: ../../printer/main.pm:1
#, fuzzy, c-format
msgid ", USB printer"
msgstr ",  USB அச்சுப்ெபறி \\/*%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ", USB printer \\#%s"
msgstr ",  USB அச்சுப்ெபறி \\/*%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid " on parallel port \\#%s"
msgstr ", இணை துறையில் உள்ளது \\/*%s"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printers"
msgstr "உள்ளமைக் அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Pipe job into a command"
msgstr "வேலையை கட்டளைக்கு அனுப்பு"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter a printer device URI"
msgstr "அச்சுப்ெபறியின் முகவரி"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on NetWare server"
msgstr "தொலைவு NetWare சேவையகத்தில் உள்ள அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "தொலைவு சம்பா சேவையகத்தில் உள்ள அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "வலையமைப்புக் அச்சுப்ெபறி(TCP/Socket)"

#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer on remote lpd server"
msgstr "தொலைவு lpd  சேவையகத்தில் உள்ள அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Printer on remote CUPS server"
msgstr "தொலைவு CUPS சேவையகத்தில் உள்ள அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Remote printer"
msgstr "தொலைவு அச்சுப்ெபறி"

#: ../../printer/main.pm:1
#, c-format
msgid "Local printer"
msgstr "உள்ளமைக் அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring applications..."
msgstr "பயன்பாடுகள் வடிவமைக்கப்படுகிறது..."

#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
#, c-format
msgid "Printerdrake"
msgstr "டிரேக்அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to configure another printer?"
msgstr "நீங்கள் மேலும் ஒரு அச்சுப்ெபறியை வடிவமைக்க வேண்டுமா?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "அச்சுபொறி நீக்கப்படுகிறது  \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove printer"
msgstr "அச்சுப்ெபறியை நீக்கு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Know how to use this printer"
msgstr "அச்சுப்ெபறியை எப்படி பயன்படுத்துவது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print test pages"
msgstr "சோதனை பக்கங்களை அச்சிடு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr "\"%s\" அச்சுப்ெபறி பயன்பாடுகளிலிருந்து நீக்க முடியவில்ைல"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr "\"%s\" அச்சுப்ெபறி பயன்பாடுகளிலிருந்து நீக்கப்பட்டது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr "அச்சுப்ெபறியை பயன்பாடுகள் பயன்படுத்த நீக்கப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr "அச்சுப்ெபறியை பயன்பாடுகளிலிருந்து நீக்கவும்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr "\"%s\" அச்சுப்ெபறி பயன்பாடுகள் பயன்படுத்த சேர்க்க முடியவில்ைல"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr "\"%s\" அச்சுப்ெபறி பயன்பாடுகள் பயன்படுத்த வெற்றிகரமாக சேர்க்கப்பட்டது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr "அச்சுப்ெபறியை பயன்பாடுகள் பயன்படுத்த சேர்க்கப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr "அச்சுப்ெபறியை பயன்பாடுகள் பயன்படுத்தட்டும்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr " \"%s\"  கொடாநிலை அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Default printer"
msgstr "கொடாநிலை அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Set this printer as the default"
msgstr "கொடாநிலை அச்சுப்ெபறியாக அமை"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer options"
msgstr "அச்சுபொறி விருப்பத்ேதர்வுகள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model"
msgstr "அச்சுப்ெபறியின் தயாரிப்பாளரின் பெயர், மாடல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "அச்சுப்ெபறியின் தயாரிப்பாளரின் பெயர், மாடல், இயக்க நிரல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "பழைய அச்சுப்ெபறி நீக்கப்படுகிறது \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer name, description, location"
msgstr "அச்சுப்ெபறியின் பெயர், விவரம், இடம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer connection type"
msgstr "அச்சுப்ெபறியின் தொடர்பு வகை: "

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "அச்சுப்ெபறியை எப்படி பயன்படுத்துவது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Raw printer"
msgstr "வெற்று அச்சுப்ெபறி "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do it!"
msgstr "செய்க"

#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
#, c-format
msgid "Close"
msgstr "மூடு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Modify printer configuration"
msgstr "அச்சுப்ெபறியை வடிவமைப்பு மாற்றியமைக்க"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add a new printer"
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
#, c-format
msgid "Normal Mode"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Change the printing system"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer sharing"
msgstr "கோப்பு பகிர்தல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "CUPS configuration"
msgstr "CUPS  வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star Office/"
"OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing system: "
msgstr "அச்சு இயக்கம்: "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Would you like to configure printing?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing Printerdrake..."
msgstr "டிரேக்அச்சு துவக்கப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking installed software..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing Foomatic..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "அச்சுப்ெபறி வடிவமைக்கப்படுகிறது... \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "அச்சுப்ெபறி வடிவமைக்கப்படுகிறது... \"%s\"..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer data..."
msgstr "அச்சுபொறியின் தரவு படிக்கப்படுகிறது... "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "நீங்கள் எந்த அஇயக்க அமைப்புக்கான நுழைவை சேர்க்க போகிறீர்கள்?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Spooler"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing %s ..."
msgstr "பொதிகளை நிறுவப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Removing %s ..."
msgstr "%s நீக்கப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting the printing system at boot time"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "paranoid"
msgstr "சந்தேகப் பேய் "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "high"
msgstr "அதிகபட்ச"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Restarting printing system..."
msgstr "அச்சுபொறி மறுதொடக்கம் செய்யப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configuration of a remote printer"
msgstr "தொலைவு அச்சுப்ெபறியின் வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Configure the network now"
msgstr "வலையமைப்ேபா வடிவமையுங்கள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Go on without configuring the network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network functionality not configured"
msgstr "வலையமைப்பு  வடிவமைக்கப்படவில்ைல"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Starting network..."
msgstr "வலையமைப்பு துவக்கப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Refreshing printer data..."
msgstr "அச்சுபொறியின் தரவு மேலேற்றப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer printer configuration"
msgstr "அச்சுபொறியின் வடிவமைப்பு மாற்றப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transferring %s..."
msgstr "%s... மாற்றப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "New printer name"
msgstr "புதிய அச்சுப்ெபறியின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Transfer"
msgstr "மாற்று"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not transfer printers"
msgstr "அச்சுப்ெபறிகளை மாற்ற வேண்டாம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing test page(s)..."
msgstr "சோதனை பக்கங்கள் அச்சிடப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print option list"
msgstr "அச்சு விருப்பத்ேதர்வுகள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing on the printer \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Did it work properly?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do not print any test page"
msgstr "சோதனை பக்கத்தில் ஏதும் அச்சிடாதே"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo test page"
msgstr "ஓளித்ேதற்ற சோதனை பக்கம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (A4)"
msgstr "மாற்று சோதனை பக்கங்கள் (A4)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Alternative test page (Letter)"
msgstr "மாற்று சோதனை பக்கங்கள் (கடிதம்)"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Standard test page"
msgstr "சாதரன சோதனை பக்கம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print"
msgstr "அச்சிடு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No test pages"
msgstr "சோதனை பக்கங்கள் ஏதுமில்ைல"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Test pages"
msgstr "சோதனை பக்கங்கள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s out of range!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be a number!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Option %s must be an integer number!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Your printer belongs to the group of GDI laser printers (winprinters) sold "
"by different manufacturers which uses the Zenographics ZJ-stream raster "
"format for the data sent to the printer. The driver for these printers is "
"still in a very early development stage and so it will perhaps not always "
"work properly. Especially it is possible that the printer only works when "
"you choose the A4 paper size.\n"
"\n"
"Some of these printers, as the HP LaserJet 1000, for which this driver was "
"originally created, need their firmware to be uploaded to them after they "
"are turned on. In the case of the HP LaserJet 1000 you have to search the "
"printer's Windows driver CD or your Windows partition for the file "
"\"sihp1000.img\" and upload the file to the printer with one of the "
"following commands:\n"
"\n"
"     lpr -o raw sihp1000.img\n"
"     cat sihp1000.img > /dev/usb/lp0\n"
"\n"
"The first command can be given by any normal user, the second must be given "
"as root. After having done so you can print normally.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Lexmark  அச்சுபொறியின் வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI அச்சுபொறியின் வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Which printer model do you have?"
msgstr "உங்கள் அச்சுபொறியின் மாடல் எது?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer model selection"
msgstr "அச்சுபொறியின் மாடலை தேர்வு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Reading printer database..."
msgstr "அச்சுபொறியின் தரவு படிக்கப்படுகிறது "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select model manually"
msgstr "அச்சுபொறியின் மாடலை கைமுறையாக தேர்வு செய்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The model is correct"
msgstr "அச்சுபொறியின் மாடல் சரி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Your printer model"
msgstr "அச்சுபொறி மாடல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Preparing printer database..."
msgstr "அச்சுபொறியின் தரவு உருவாக்கப்படுகிறது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Location"
msgstr "இடம்"

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Description"
msgstr "குறிப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Name of printer"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Scanning on your HP multi-function device"
msgstr ", பலமுனை சாதனம் "

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing mtools packages..."
msgstr "பொதிகளை நிறுவப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing SANE packages..."
msgstr "பொதிகளை நிறுவப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking device and configuring HPOJ..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Installing HPOJ package..."
msgstr "பொதிகளை நிறுவப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
"PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A command line must be entered!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Command line"
msgstr "களத்தின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Pipe into command"
msgstr "வேலையை கட்டளைக்கு அனுப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected model: %s %s"
msgstr "கண்டுபிடிக்கப்பட்ட மாடல்: %s %s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "A valid URI must be entered!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Device URI"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""

#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
#, c-format
msgid "Port"
msgstr "துறை"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The port number should be an integer!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer host name or IP missing!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "TCP/Socket Printer Options"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Scanning network..."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection"
msgstr "அச்சுப்ெபறி தன்னியக்க கண்டுபிடித்தல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP queue name missing!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NCP server name missing!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Print Queue Name"
msgstr "அச்சுப்ெபறி சாரையின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer Server"
msgstr "அச்சுப்ெபறி சேவையகம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "NetWare Printer Options"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Samba share name missing!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "சேவையகத்தின் பெயர் அல்லது IP முகவரியைக் கொடுக்கவும்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detected"
msgstr "தானியக்கத்தால் கண்டுபிடிக்கப்பட்டது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Workgroup"
msgstr "பணிக்குழு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Share name"
msgstr "பகிரின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server IP"
msgstr "சம்பா சேவையகத்தின் IP"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB server host"
msgstr "சம்பா சேவையகம்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name missing!"
msgstr "தொலைவு அச்சுப்ெபறியின் பெயர் இல்ைல!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name missing!"
msgstr "தொலைவு கணினியின் பெயர் இல்ைல!"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote printer name"
msgstr "தொலைவு அச்சுப்ெபறியின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote host name"
msgstr "தொலைவு கணினியின் பெயர்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Remote lpd Printer Options"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Manual configuration"
msgstr "கைமுறை வடிவமைப்பு "

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "தயவுசெய்து, உங்கள் அச்சுப்ெபறி உள்ள துறையை தேர்வுச் செய்யுங்கள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "தயவுசெய்து, உங்கள் அச்சுப்ெபறி உள்ள துறையை தேர்வுச் செய்யுங்கள்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "The following printer was auto-detected. "
msgstr ""
"கிழ்கானும் அச்சுப்ெபறிகள்\n"
"\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Available printers"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "No printer found!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "You must enter a device or file name!"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Local Printer"
msgstr "உள்ளமை அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "USB printer \\#%s"
msgstr ",  USB அச்சுப்ெபறி \\/*%s"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer on parallel port \\#%s"
msgstr ", இணை துறையில் உள்ளது \\/*%s"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Detected %s"
msgstr " %s  கண்டுபிடிக்கப்பட்டது"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and your Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "உள்ளமைக் அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "மேலே கொடுக்கப்பட்டுள்ள அச்சுப்ெபறியை அச்சிட பயன்படுத்த வேண்டுமா?\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (தயவுசெய்து, உங்கள் அச்சுப்ெபறி இணைந்துள்ளதா என சோதனை செய்யுங்கள்).\n"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr "நேரடியாக  கணினியுடன் இணைந்துள்ளது"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "நேரடியாக  கணினியுடன் இணைந்துள்ளது"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "நேரடியாக  கணினியுடன் இணைந்துள்ளது"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "and %d unknown printers"
msgstr ""
"\n"
"மற்றும் %d அடையாளம் தெரியாத அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr ""
"\n"
"மற்றும் ஒரு அடையாளம் தெரியாத அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Checking your system..."
msgstr "உங்கள் கணினி சோதிக்கப்படுகிறது..."

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "192.168.100.0/255.255.255.0\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "192.168.100.0/24\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "10.1.*\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "10.0.0.*\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "192.168.100.194\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "உள்ளமைக் அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Remove selected host/network"
msgstr "நுழைவிடத்ைத நீக்கு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Add host/network"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "தானியக்க CUPS வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
#, fuzzy, c-format
msgid "No remote machines"
msgstr "தொலைவு அச்சுப்ெபறி"

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "அறிவிப்பாளரின் வடிவமைப்பு "

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "கோப்பு பகிர்தல்"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessable by remote machines and by which remote machines."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, fuzzy, c-format
msgid "CUPS printer sharing configuration"
msgstr "OKI அச்சுபொறியின் வடிவமைப்பு"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "How is the printer connected?"
msgstr "அச்சுப்ெபறி  எப்படி இணைக்கப்பட்டுள்ளது?"

#: ../../printer/printerdrake.pm:1
#, c-format
msgid "Select Printer Connection"
msgstr "அச்சுப்ெபறி இணைக்கப்பட்டுள்ள விதத்ைத தேர்வு செய்யுங்கள்"

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the user umask."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (val)\n"
"\n"
"Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (size)\n"
"\n"
"Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"if set to yes, check for empty password, or a password while it should be "
"in /etc/shadow or other users with id 0."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (umask)\n"
"\n"
"Set the root umask."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (length, ndigits=0, nupper=0)\n"
"\n"
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Set the password history length to prevent password reuse."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (max, inactive=-1)\n"
"\n"
"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
"\\fP."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (name)\n"
"\n"
"Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enable/Disable sulogin(8) in single user level."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Activate/Disable daily security check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Use password to authenticate users."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable msec hourly security check."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable IP spoofing protection."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, alert=1)\n"
"\n"
"Enable/Disable name resolution spoofing protection.  If\n"
"\\fIalert\\fP is true, also reports to syslog."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, expr='*.*', dev='tty12')\n"
"\n"
"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
"expression describing what to log (see syslog.conf(5) for more details) and\n"
"dev the device to report the log."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
"allow and /etc/at.allow\n"
"(see man at(1) and crontab(1))."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: ()\n"
"\n"
"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
"server\n"
"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
"server\n"
"is used by chkconfig --add to decide to add a service if it is present in "
"the file\n"
"during the installation of packages."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
"\\fIarg\\fP = ALL. Only local ones\n"
"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
"services you need, use /etc/hosts.allow\n"
"(see hosts.allow(5))."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"The argument specifies if clients are authorized to connect\n"
"to the X server on the tcp port 6000 or not."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg, listen_tcp=None)\n"
"\n"
"Allow/Forbid X connections. First arg specifies what is done\n"
"on the client side: ALL (all connections are allowed), LOCAL (only\n"
"local connection) and NONE (no connection)."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid direct root login."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid remote root login."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid reboot by the console user."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
"\\fP = NONE no issues are\n"
"allowed else only /etc/issue is allowed."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Allow/Forbid autologin."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse icmp echo."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
" Accept/Refuse broadcasted icmp echo."
msgstr ""

#: ../../security/help.pm:1
#, c-format
msgid ""
"Arguments: (arg)\n"
"\n"
"Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: ../../security/level.pm:1
#, c-format
msgid "Security Administrator (login or email)"
msgstr "பாதுகாப்பு மேலாளர்(பெயர் அல்லது மின்னஞ்சல் முகவரி)"

#: ../../security/level.pm:1
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "இந்த நூலகநிரலை  பயன்படுத்துவதால் பல பாதுகாப்பு பிரச்சினைகளை தவிர்க்க முடியும்"

#: ../../security/level.pm:1
#, c-format
msgid "Use libsafe for servers"
msgstr "libsafe என்ற நூலகநிரலை  பரிமாறிகளில் பயன்படுத்துங்கள்"

#: ../../security/level.pm:1
#, c-format
msgid "Security level"
msgstr "பாதுகாப்பு நிலை"

#: ../../security/level.pm:1
#, c-format
msgid "Please choose the desired security level"
msgstr "உங்களுக்கு தேவையான பாதுகாப்பு நிலையைத் தேர்வுச் செய்யவும்"

#: ../../security/level.pm:1
#, c-format
msgid "DrakSec Basic Options"
msgstr "டிரேக்பாதுகாப்பு அடிப்படை விருப்பத்ேதர்வுகள்"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr "இது சென்ற நிலை போன்றதே. இது முற்றிலும் மூடப்பட்ட ஓர் கணினியாகும்"

#: ../../security/level.pm:1
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"உங்கள் கணினி தற்போது ஓர் பரிமாறியாக பயன்படக்கூடிய அளவு பாதுகாப்பானது\n"
"இது வெளியில் இருந்து வேண்டிகளின் தேவையை ஈடுச் செய்ய முடியும் \n"
"உங்கள் கணினி ஒரு சாதரன பயன்பாட்டிற்கு என்றால், இன்னும் சற்று குறைந்த பாதுகாப்பளவை "
"பயன்படுத்தலாம்"

#: ../../security/level.pm:1
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr "அதிக பாதுகாப்பானது. தினமும் பல சோதனைகள் நடைபெறும்"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"சரியான பாதுகாப்பானது. கடவுச்ெசால் உடையது\n"
"இணையத்திற்கு இப்படியே தொடர்பு கொள்ளலாம்"

#: ../../security/level.pm:1
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"ஓரளவு பாதுகாப்பானது. கடவுச்ெசால் உடையது\n"
"இணையத்திற்கு இப்படியே தொடர்பு கொள்ளக்கூடாது"

#: ../../security/level.pm:1
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"இந்த அமைப்புகளை பயன்படுத்துதல் கூடாது,\n"
"முற்றிலும் பாதுகாப்பற்றது. கடவுச்ெசால் கூட கிடையாது\n"
"இணையத்திற்கு இப்படியே தொடர்பு கொள்ளக்கூடாது"

#: ../../security/level.pm:1
#, c-format
msgid "Paranoid"
msgstr "சந்தேகப் பேய்"

#: ../../security/level.pm:1
#, c-format
msgid "Higher"
msgstr "மிக உயர்வான"

#: ../../security/level.pm:1
#, c-format
msgid "High"
msgstr "உயர்வான"

#: ../../security/level.pm:1
#, c-format
msgid "Poor"
msgstr "மோசமான"

#: ../../security/level.pm:1
#, c-format
msgid "Welcome To Crackers"
msgstr "பகைவர்களே வருக"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""
"மாண்ட்ரேக் பலருடைய உழைப்பால் உங்களுக்கு கிடைக்கிறது. இதை நீங்கள் பயன்படுத்துவதால் நீங்களும் "
"ஒரு திறந்த மூலநிரல் உலகின் உறுப்பினர் ஆகிறீர்கள்"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Welcome to the Open Source world"
msgstr "திறந்த மூலநிரல் உலகுக்கு வருக"

#: ../../share/advertising/01-thanks.pl:1
#, c-format
msgid "Thank you for choosing Mandrake Linux 9.1"
msgstr "மாண்ட்ரேக் லினக்ஸ் 9.1 தேர்வு செய்ததற்கு நன்றி"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid ""
"To share your own knowledge and help build Linux tools, join the discussion "
"forums you'll find on our \"Community\" webpages"
msgstr ""
"உங்கள் திறன்களை மற்றவருக்கு பயன்படும் வகையில் பயன்படுத்த, \"Community\" இணையதளத்துக்கு "
"வாருங்கள்"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Want to know more about the Open Source community?"
msgstr "திறந்த மூலநிரல் உலகை பற்றி அறிய விருப்பமா?"

#: ../../share/advertising/02-community.pl:1
#, c-format
msgid "Get involved in the Free Software world"
msgstr "சுதந்தர மென்பொருள் உலகில் பங்கெடுக்க வாருங்கள்"

#: ../../share/advertising/03-internet.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 has selected the best software for you. Surf the Web and "
"view animations with Mozilla and Konqueror, or read your mail and handle "
"your personal information with Evolution and Kmail"
msgstr ""
"மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு பயன்படும் பல பயனுள்ள நிரல்களை கொண்டுள்ளது. மோசிலா, "
"கான்கொரர் ஆகிய மேலோடிகளும், gமின்னஞ்சல் Kமின்னஞ்சல் ஆகியவற்றுடன் வருகிறது"

#: ../../share/advertising/03-internet.pl:1
#, c-format
msgid "Get the most from the Internet"
msgstr "இணையத்ைத நன்றாக பயன்படுத்தவும்"

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 enables you to use the very latest software to play audio "
"files, edit and handle your images or photos, and play videos"
msgstr ""
"மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு இசையை கேட்க, படங்களை உருவாக்க, தொகுக்க,வடிவமைக்க "
"ஒளித்ேதற்றங்களை பார்க்க பல நிரல்களுடன் வருகிறது"

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid "Push multimedia to its limits!"
msgstr "பல்லூடகத்ைத அதன் எல்ைலக்கே கொண்டு செல்லுங்கள்"

#: ../../share/advertising/04-multimedia.pl:1
#, c-format
msgid "Discover the most up-to-date graphical and multimedia tools!"
msgstr "சிறந்த வரைவியல் மற்றும் பல்லூடக கருவிகளை கொண்டுள்ளது"

#: ../../share/advertising/05-games.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides the best Open Source games - arcade, action, "
"strategy, ..."
msgstr "மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு சிறந்த விளையாட்டுக்களுடன் வருகிறது"

#: ../../share/advertising/05-games.pl:1
#, c-format
msgid "Games"
msgstr "விளையாட்டுக்கள்"

#: ../../share/advertising/06-mcc.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides a powerful tool to fully customize and configure "
"your machine"
msgstr "மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு சிறந்த வடிவமைப்பு கருவிகளை தருகிறது"

#: ../../share/advertising/06-mcc.pl:1 ../../standalone/drakbug:1
#, c-format
msgid "Mandrake Control Center"
msgstr "மாண்ட்ரேக் கட்டுப்பட்டு மையம்"

#: ../../share/advertising/07-desktop.pl:1
#, c-format
msgid ""
"Mandrake Linux 9.1 provides you with 11 user interfaces that can be fully "
"modified: KDE 3, Gnome 2, WindowMaker, ..."
msgstr ""
"மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு சிறந்த 11 சாளர மேலாளர்களுடன் Kசாளரம், Gசாளரம், "
"ஆகியவற்றுடன்  வருகிறது."

#: ../../share/advertising/07-desktop.pl:1
#, c-format
msgid "User interfaces"
msgstr "சாளர மேலாளர்"

#: ../../share/advertising/08-development.pl:1
#, c-format
msgid ""
"Use the full power of the GNU gcc 3 compiler as well as the best Open Source "
"development environments"
msgstr "GNU gcc 3 யுடன் மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு வருகிறது"

#: ../../share/advertising/08-development.pl:1
#, c-format
msgid "Mandrake Linux 9.1 is the ultimate development platform"
msgstr "மாண்ட்ரேக் லினக்ஸ் 9.1 உங்களுக்கு சிறந்த உருவாக்க நிலையமாக திகழ்கிறது"

#: ../../share/advertising/08-development.pl:1
#, c-format
msgid "Development simplified"
msgstr "உருவாக்கம் எளிதாக்கப்பட்டுள்ளது"

#: ../../share/advertising/09-server.pl:1
#, c-format
msgid ""
"Transform your machine into a powerful Linux server with a few clicks of "
"your mouse: Web server, mail, firewall, router, file and print server, ..."
msgstr ""
"உங்கள் கணினியை ஒர் அற்புதமாக சேவையகமாக மாற்ற எளிய மாயாவிகளுடன் உங்களுக்கு வருகிறது"

#: ../../share/advertising/09-server.pl:1
#, c-format
msgid "Turn your machine into a reliable server"
msgstr "உங்கள் கணினியை ஒர் அற்புதமாக சேவையகமாக மாற்றுங்கள்"

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid "This product is available on MandrakeStore website"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid ""
"This firewall product includes network features that allow you to fulfill "
"all your security needs"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid ""
"The MandrakeSecurity range includes the Multi Network Firewall product (M.N."
"F.)"
msgstr ""

#: ../../share/advertising/10-mnf.pl:1
#, c-format
msgid "Optimize your security"
msgstr "உங்கள் பாதுகாப்புக்காக"

#: ../../share/advertising/11-mdkstore.pl:1
#, c-format
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies,\" are available online on our e-store:"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl:1
#, c-format
msgid "The official MandrakeSoft store"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl:1
#, c-format
msgid ""
"MandrakeSoft works alongside a selection of companies offering professional "
"solutions compatible with Mandrake Linux. A list of these partners is "
"available on the MandrakeStore"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl:1
#, c-format
msgid "Strategic partners"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid ""
"Whether you choose to teach yourself online or via our network of training "
"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI "
"certification program (worldwide professional technical certification)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid "Certify yourself on Linux"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid ""
"The training program has been created to respond to the needs of both end "
"users and experts (Network and System administrators)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl:1
#, c-format
msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl:1
#, c-format
msgid "Become a MandrakeExpert"
msgstr "மாண்ட்ரேக் வித்தகராகவும்"

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, c-format
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, c-format
msgid "An online platform to respond to company's specific support needs"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl:1
#, fuzzy, c-format
msgid "MandrakeExpert Corporate"
msgstr "மாண்ட்ரேக்இணைய"

#: ../../share/advertising/17-mdkclub.pl:1
#, c-format
msgid ""
"MandrakeClub and Mandrake Corporate Club were created for business and "
"private users of Mandrake Linux who would like to directly support their "
"favorite Linux distribution while also receiving special privileges. If you "
"enjoy our products, if your company benefits from our products to gain a "
"competititve edge, if you want to support Mandrake Linux development, join "
"MandrakeClub!"
msgstr ""

#: ../../share/advertising/17-mdkclub.pl:1
#, c-format
msgid "Discover MandrakeClub and Mandrake Corporate Club"
msgstr ""

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr ""

#: ../../standalone/XFdrake:1
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr " /etc/dhcpd.conf  என்ற கோப்பு முதலில் உருவாக்கப்படவேண்டும்"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "No floppy drive available!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Couldn't access the floppy!"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Please insert floppy disk:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "Write Config"
msgstr "வடிவமைப்பு"

#: ../../standalone/drakTermServ:1
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: ../../standalone/drakTermServ:1
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: ../../standalone/drakTermServ:1
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "வலையமைப்பாக்க  வடிவமைப்பு"