# SOME DESCRIPTIVE TITLE. # Copyright (C) 1999 MandrakeSoft. # Alexander Bokovoy <ab@avilink.net>, 2000 # Maryia Davidouskaia <maryia@scientist.com>, 2000 msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 2000-10-16 13:34+0200\n" "PO-Revision-Date: 2000-09-24 12:30 +0100\n" "Last-Translator: Alexander Bokovoy <ab@avilink.net>\n" "Language-Team: be\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=windows-1251\n" "Content-Transfer-Encoding: 8bit\n" #: ../../Xconfigurator.pm_.c:179 msgid "Graphic card" msgstr "�i��������" #: ../../Xconfigurator.pm_.c:179 msgid "Select a graphic card" msgstr "�������� �i��������" #: ../../Xconfigurator.pm_.c:180 msgid "Choose a X server" msgstr "�������� X ������" #: ../../Xconfigurator.pm_.c:180 msgid "X server" msgstr "X ������" #: ../../Xconfigurator.pm_.c:217 ../../Xconfigurator.pm_.c:223 #, c-format msgid "XFree %s" msgstr "������ XFree86 %s" #: ../../Xconfigurator.pm_.c:220 msgid "Which configuration of XFree do you want to have?" msgstr "���� ����i������� XFree �� ������� ��������?" #: ../../Xconfigurator.pm_.c:232 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "��������� 3D-���������� � ����� ��������� �������� ����� � XFree %s.\n" "XFree %s ���� ������������� ����� 2D-���������� ��� ����� ���������." #: ../../Xconfigurator.pm_.c:234 ../../Xconfigurator.pm_.c:257 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree " "%s." #: ../../Xconfigurator.pm_.c:236 ../../Xconfigurator.pm_.c:259 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s � ���������� 3D-����������" #: ../../Xconfigurator.pm_.c:245 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree " "%s.\n" "����� �� �����, ��� ���� ����������������� ��������� I ���� �������I ��\n" "���I����� ������ ����'�����. ���� �i�������� ��������i������ XFree %s, ��i\n" "����� ��������i��� ����� � 2D-�����������." #: ../../Xconfigurator.pm_.c:248 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "���� �i�������� ���� ���� 3D-����������, ���� ��������i������ �����i XFree " "%s.\n" "����� �� �����, ��� ���� ����������������� ��������� I ���� �������I ��\n" "���I����� ������ ����'�����." #: ../../Xconfigurator.pm_.c:250 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s � ����������������� ���������� 3D-����������" #: ../../Xconfigurator.pm_.c:265 msgid "XFree configuration" msgstr "��������� XFree" #: ../../Xconfigurator.pm_.c:301 msgid "Select the memory size of your graphic card" msgstr "�������� ����� �i��������i" #: ../../Xconfigurator.pm_.c:345 msgid "Choose options for server" msgstr "�������� ���������� ��������i ��� �������" #: ../../Xconfigurator.pm_.c:356 msgid "Choose a monitor" msgstr "�������� ���i���" #: ../../Xconfigurator.pm_.c:356 msgid "Monitor" msgstr "���i���" #: ../../Xconfigurator.pm_.c:359 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "��� ��������� ��������� - ���� ������� ������������ ��������i, �i\n" "������� ��������� ����� ������, � ������� ����� ����� �������� -\n" "������� �������������� �i�����i����i ��������i, �i ������� ������\n" "����� ������.\n" "\n" "�����I �����, ��� ������� ���i ���i��� �� ������� �i�����i����i, ����\n" "�� ��������� ��������� ���������i ������ ���i����: � ����i������ �������\n" "�� ������ �����i�� ���i���.\n" "���i �� ������������, �������� �������������� ��������i." #: ../../Xconfigurator.pm_.c:366 msgid "Horizontal refresh rate" msgstr "������� �������������� ��������i" #: ../../Xconfigurator.pm_.c:366 msgid "Vertical refresh rate" msgstr "������� ������������ ��������i" #: ../../Xconfigurator.pm_.c:405 msgid "Monitor not configured" msgstr "���i��� ������ �� ���������" #: ../../Xconfigurator.pm_.c:408 msgid "Graphic card not configured yet" msgstr "�i�������� ���� �� ������i��������" #: ../../Xconfigurator.pm_.c:411 msgid "Resolutions not chosen yet" msgstr "������ ������ ���� �� ���������" #: ../../Xconfigurator.pm_.c:427 msgid "Do you want to test the configuration?" msgstr "�i ������� �������i������ ��������i?" #: ../../Xconfigurator.pm_.c:431 msgid "Warning: testing this graphic card may freeze your computer" msgstr "������������: ����i������� �� ����� �i�������� ����������" #: ../../Xconfigurator.pm_.c:434 msgid "Test of the configuration" msgstr "�������� ��������� ��������i" #: ../../Xconfigurator.pm_.c:473 msgid "" "\n" "try to change some parameters" msgstr "" "\n" "����������� ����i�� ��������� ���������" #: ../../Xconfigurator.pm_.c:473 msgid "An error has occurred:" msgstr "�������:" #: ../../Xconfigurator.pm_.c:495 #, c-format msgid "Leaving in %d seconds" msgstr "��������� %d ������" #: ../../Xconfigurator.pm_.c:505 msgid "Is this the correct setting?" msgstr "���� ��������� ��������� ��������i?" #: ../../Xconfigurator.pm_.c:513 msgid "An error has occurred, try to change some parameters" msgstr "�������� �������, ����������� ����i�� ���������" #: ../../Xconfigurator.pm_.c:550 ../../printerdrake.pm_.c:276 msgid "Resolution" msgstr "������ ������" #: ../../Xconfigurator.pm_.c:585 msgid "Choose the resolution and the color depth" msgstr "����� ������ ������ i ����i�i ������" #: ../../Xconfigurator.pm_.c:587 #, c-format msgid "Graphic card: %s" msgstr "�i��������: %s" #: ../../Xconfigurator.pm_.c:588 #, c-format msgid "XFree86 server: %s" msgstr "������ XFree86: %s" #: ../../Xconfigurator.pm_.c:597 msgid "Show all" msgstr "�������� ��" #: ../../Xconfigurator.pm_.c:621 msgid "Resolutions" msgstr "������ ������" #: ../../Xconfigurator.pm_.c:1019 #, c-format msgid "Keyboard layout: %s\n" msgstr "��� ����i�����: %s\n" #: ../../Xconfigurator.pm_.c:1020 #, c-format msgid "Mouse type: %s\n" msgstr "��� ����: %s\n" #: ../../Xconfigurator.pm_.c:1021 #, c-format msgid "Mouse device: %s\n" msgstr "���: %s\n" #: ../../Xconfigurator.pm_.c:1022 #, c-format msgid "Monitor: %s\n" msgstr "���i���: %s\n" #: ../../Xconfigurator.pm_.c:1023 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "������� ���.����. ���i����: %s\n" #: ../../Xconfigurator.pm_.c:1024 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "������� ����.����. ���i����: %s\n" #: ../../Xconfigurator.pm_.c:1025 #, c-format msgid "Graphic card: %s\n" msgstr "�i��������: %s\n" #: ../../Xconfigurator.pm_.c:1026 #, c-format msgid "Graphic memory: %s kB\n" msgstr "�i���������: %s ��\n" #: ../../Xconfigurator.pm_.c:1028 #, c-format msgid "Color depth: %s\n" msgstr "��������� ����i�i ������: %s\n" #: ../../Xconfigurator.pm_.c:1029 #, c-format msgid "Resolution: %s\n" msgstr "������ ������: %s\n" #: ../../Xconfigurator.pm_.c:1031 #, c-format msgid "XFree86 server: %s\n" msgstr "������ XFree86: %s\n" #: ../../Xconfigurator.pm_.c:1032 #, c-format msgid "XFree86 driver: %s\n" msgstr "������ XFree86: %s\n" #: ../../Xconfigurator.pm_.c:1051 msgid "Preparing X-Window configuration" msgstr "���������� ��������i X-Window" #: ../../Xconfigurator.pm_.c:1065 msgid "Change Monitor" msgstr "����i�� ���i���" #: ../../Xconfigurator.pm_.c:1066 msgid "Change Graphic card" msgstr "����i�� �i��������" #: ../../Xconfigurator.pm_.c:1067 msgid "Change Server options" msgstr "����i�� ��������i �������" #: ../../Xconfigurator.pm_.c:1068 msgid "Change Resolution" msgstr "����i�� ������ ������" #: ../../Xconfigurator.pm_.c:1069 msgid "Show information" msgstr "I���������" #: ../../Xconfigurator.pm_.c:1070 msgid "Test again" msgstr "��������� ���� ���" #: ../../Xconfigurator.pm_.c:1071 ../../standalone/rpmdrake_.c:46 msgid "Quit" msgstr "�����" #: ../../Xconfigurator.pm_.c:1075 ../../standalone/drakboot_.c:40 msgid "What do you want to do?" msgstr "��� �� ������� ����i��?" #: ../../Xconfigurator.pm_.c:1082 #, c-format msgid "" "Keep the changes?\n" "Current configuration is:\n" "\n" "%s" msgstr "" "ֳ ������� �� �������� ��������?\n" "������� ������������:\n" "\n" "%s" #: ../../Xconfigurator.pm_.c:1103 #, c-format msgid "Please relog into %s to activate the changes" msgstr "���i �����, �������i�� � %s ��� ��������i ���������" #: ../../Xconfigurator.pm_.c:1123 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "���i �����, �����i��, � ����� ����������� Ctrl-Alt-BackSpace" #: ../../Xconfigurator.pm_.c:1126 msgid "X at startup" msgstr "������ X ��� ������ �i�����" #: ../../Xconfigurator.pm_.c:1127 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" "����� ������i�� �i����� ��� ������������ ������� X ����� ������ �i�����.\n" "�������, ��� X �������� ��� ��������?" #: ../../Xconfigurator.pm_.c:1151 msgid "Autologin" msgstr "����������� ������ � �i�����" #: ../../Xconfigurator.pm_.c:1152 msgid "" "I can set up your computer to automatically log on one user.\n" "If you don't want to use this feature, click on the cancel button." msgstr "" "����� ������i�� �i����� ��� ������������ ������� � �i����� ���\n" "������ ����������i��. ���i �� �� ������� ������, ���i��i�� \"������\"." #: ../../Xconfigurator.pm_.c:1154 msgid "Choose the default user:" msgstr "�������� �������� ����������i��:" #: ../../Xconfigurator.pm_.c:1155 msgid "Choose the window manager to run:" msgstr "�������� �������� �����:" #: ../../Xconfigurator_consts.pm_.c:6 msgid "256 colors (8 bits)" msgstr "256 ������ (8 �i�)" #: ../../Xconfigurator_consts.pm_.c:7 msgid "32 thousand colors (15 bits)" msgstr "32 ������ ������ (15 �i�)" #: ../../Xconfigurator_consts.pm_.c:8 msgid "65 thousand colors (16 bits)" msgstr "65 ����� ������ (16 �i�)" #: ../../Xconfigurator_consts.pm_.c:9 msgid "16 million colors (24 bits)" msgstr "16 �i����� ������ (24 �i��)" #: ../../Xconfigurator_consts.pm_.c:10 msgid "4 billion colors (32 bits)" msgstr "4 �i�i���� ������ (24 �i��)" #: ../../Xconfigurator_consts.pm_.c:106 msgid "256 kB" msgstr "256 ��" #: ../../Xconfigurator_consts.pm_.c:107 msgid "512 kB" msgstr "512 ��" #: ../../Xconfigurator_consts.pm_.c:108 msgid "1 MB" msgstr "1 ��" #: ../../Xconfigurator_consts.pm_.c:109 msgid "2 MB" msgstr "2 ��" #: ../../Xconfigurator_consts.pm_.c:110 msgid "4 MB" msgstr "4 ��" #: ../../Xconfigurator_consts.pm_.c:111 msgid "8 MB" msgstr "8 ��" #: ../../Xconfigurator_consts.pm_.c:112 msgid "16 MB or more" msgstr "16 �� �i �����" #: ../../Xconfigurator_consts.pm_.c:117 ../../Xconfigurator_consts.pm_.c:118 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "���������� VGA, 640x480 ��� 60 Hz" #: ../../Xconfigurator_consts.pm_.c:119 msgid "Super VGA, 800x600 at 56 Hz" msgstr "Super VGA, 800x600 ��� 56 Hz" #: ../../Xconfigurator_consts.pm_.c:120 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "������� � 8514, 1024x768 ��� 87 Hz ����������� (���� 800x600)" #: ../../Xconfigurator_consts.pm_.c:121 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "Super VGA, 1024x768 ��i 87 Hz �����������, 800x600 ��� 56 Hz" #: ../../Xconfigurator_consts.pm_.c:122 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "Extended Super VGA, 800x600 ��� 60 Hz, 640x480 ��� 72 Hz" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "������������� SVGA, 1024x768 ��� 60 Hz, 800x600 ��� 72 Hz" #: ../../Xconfigurator_consts.pm_.c:124 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "�������������� SVGA, 1024x768 ��� 70 Hz" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "������������, ��i ������� ��������i���� 1280x1024 ��� 60 Hz" #: ../../Xconfigurator_consts.pm_.c:126 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "������������, ��i ������� ��������i���� 1280x1024 ��� 74 Hz" #: ../../Xconfigurator_consts.pm_.c:127 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "������������, ��i ������� ��������i���� 1280x1024 ��� 76 Hz" #: ../../Xconfigurator_consts.pm_.c:128 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "���i���, ��i ������� ��������i���� 1600x1200 ��� 70 Hz" #: ../../Xconfigurator_consts.pm_.c:129 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "���i���, ��i ������� ��������i���� 1600x1200 ��� 76 Hz" #: ../../any.pm_.c:91 ../../any.pm_.c:121 msgid "First sector of boot partition" msgstr "����� ������ ������������ ��������" #: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any.pm_.c:150 msgid "First sector of drive (MBR)" msgstr "����� ������ ������� (MBR)" #: ../../any.pm_.c:95 msgid "SILO Installation" msgstr "����븢�� SILO" #: ../../any.pm_.c:96 ../../any.pm_.c:102 msgid "Where do you want to install the bootloader?" msgstr "���� �� ������� ���������� ��������� ���������?" #: ../../any.pm_.c:101 msgid "LILO/grub Installation" msgstr "�������� LILO/GRUB" #: ../../any.pm_.c:111 ../../install_steps_interactive.pm_.c:732 msgid "None" msgstr "����" #: ../../any.pm_.c:111 msgid "Which bootloader(s) do you want to use?" msgstr "��i ��������� ��������� �� ������� �������������?" #: ../../any.pm_.c:125 msgid "Bootloader installation" msgstr "����븢�� ����������" #: ../../any.pm_.c:127 msgid "Boot device" msgstr "����������� �������" #: ../../any.pm_.c:128 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (�� ������ ��� ������ ����i�� BIOS)" #: ../../any.pm_.c:129 msgid "Compact" msgstr "���������" #: ../../any.pm_.c:129 msgid "compact" msgstr "���������" #: ../../any.pm_.c:130 ../../any.pm_.c:199 msgid "Video mode" msgstr "�i���-�����" #: ../../any.pm_.c:132 msgid "Delay before booting default image" msgstr "�������� ����� ��������� ������� �� ���������" #: ../../any.pm_.c:134 ../../install_steps_interactive.pm_.c:760 #: ../../install_steps_interactive.pm_.c:811 ../../netconnect.pm_.c:555 #: ../../printerdrake.pm_.c:94 ../../printerdrake.pm_.c:128 #: ../../standalone/adduserdrake_.c:42 msgid "Password" msgstr "������" #: ../../any.pm_.c:135 ../../install_steps_interactive.pm_.c:761 #: ../../install_steps_interactive.pm_.c:812 #: ../../standalone/adduserdrake_.c:43 msgid "Password (again)" msgstr "�������� ������" #: ../../any.pm_.c:136 msgid "Restrict command line options" msgstr "����������� ����� ���������� �����" #: ../../any.pm_.c:136 msgid "restrict" msgstr "�����������" #: ../../any.pm_.c:142 msgid "Bootloader main options" msgstr "������� ����i ����������� ����������" #: ../../any.pm_.c:145 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "����� ``����������� ����� ���������� �����'' �� ��������������� ��� ������" #: ../../any.pm_.c:146 ../../install_steps_interactive.pm_.c:770 #: ../../install_steps_interactive.pm_.c:825 #: ../../standalone/adduserdrake_.c:56 msgid "Please try again" msgstr "����������� ���� ���" #: ../../any.pm_.c:146 ../../install_steps_interactive.pm_.c:770 #: ../../install_steps_interactive.pm_.c:825 #: ../../standalone/adduserdrake_.c:56 msgid "The passwords do not match" msgstr "�����i �� ���������" #: ../../any.pm_.c:157 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" "� ���� ������ ��������� ������.\n" "�� ������ ������ ����, ����� ����i�� i�������." #: ../../any.pm_.c:165 ../../printerdrake.pm_.c:352 #: ../../standalone/rpmdrake_.c:302 msgid "Add" msgstr "������" #: ../../any.pm_.c:165 ../../diskdrake.pm_.c:46 #: ../../install_steps_interactive.pm_.c:805 ../../netconnect.pm_.c:837 #: ../../printerdrake.pm_.c:352 ../../standalone/adduserdrake_.c:36 msgid "Done" msgstr "��������" #: ../../any.pm_.c:174 msgid "Which type of entry do you want to add?" msgstr "��i ��� ������ ������� ������?" #: ../../any.pm_.c:175 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:175 msgid "Other OS (SunOS...)" msgstr "I���� �� (SunOS,...)" #: ../../any.pm_.c:175 msgid "Other OS (windows...)" msgstr "I���� OS (windows...)" #: ../../any.pm_.c:196 msgid "Image" msgstr "������" #: ../../any.pm_.c:197 ../../any.pm_.c:206 msgid "Root" msgstr "Root" #: ../../any.pm_.c:198 msgid "Append" msgstr "��������" #: ../../any.pm_.c:200 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:201 msgid "Read-write" msgstr "�������-���i�" #: ../../any.pm_.c:208 msgid "Table" msgstr "����i��" #: ../../any.pm_.c:209 msgid "Unsafe" msgstr "����������" #: ../../any.pm_.c:215 msgid "Label" msgstr "�����" #: ../../any.pm_.c:217 msgid "Default" msgstr "�� ���������" #: ../../any.pm_.c:220 ../../install_gtk.pm_.c:82 #: ../../install_steps_interactive.pm_.c:758 ../../interactive.pm_.c:76 #: ../../interactive.pm_.c:86 ../../interactive.pm_.c:250 #: ../../interactive_newt.pm_.c:51 ../../interactive_newt.pm_.c:99 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:243 #: ../../my_gtk.pm_.c:486 ../../my_gtk.pm_.c:661 ../../printerdrake.pm_.c:398 #: ../../printerdrake.pm_.c:418 msgid "Ok" msgstr "��" #: ../../any.pm_.c:220 msgid "Remove entry" msgstr "�����i�� ���i�" #: ../../any.pm_.c:223 msgid "Empty label not allowed" msgstr "������ ����� �� �����������" #: ../../any.pm_.c:224 msgid "This label is already used" msgstr "����� ����� ��� ���������������" #: ../../any.pm_.c:500 #, c-format msgid "Found %s %s interfaces" msgstr "��������� %s %s i���������" #: ../../any.pm_.c:501 msgid "Do you have another one?" msgstr "�i ���� � ��� i���?" #: ../../any.pm_.c:502 #, c-format msgid "Do you have any %s interfaces?" msgstr "�i ���� � ��� %s i��������?" #: ../../any.pm_.c:504 ../../interactive.pm_.c:81 ../../my_gtk.pm_.c:485 #: ../../netconnect.pm_.c:90 ../../netconnect.pm_.c:465 #: ../../printerdrake.pm_.c:233 msgid "No" msgstr "��" #: ../../any.pm_.c:504 ../../interactive.pm_.c:81 ../../my_gtk.pm_.c:485 #: ../../netconnect.pm_.c:88 ../../netconnect.pm_.c:463 msgid "Yes" msgstr "���" #: ../../any.pm_.c:505 msgid "See hardware info" msgstr "��. ��i����� ������������" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:522 #, c-format msgid "Installing driver for %s card %s" msgstr "�������� �������� ��� %s ����� %s" #: ../../any.pm_.c:523 #, c-format msgid "(module %s)" msgstr "(������ %s)" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:534 #, c-format msgid "Which %s driver should I try?" msgstr "��i ������� %s ������������?" #: ../../any.pm_.c:542 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "� ��������� �������� %s �������� �������� ��������� ���������� i���������,\n" "��� �������� ���� �� �����������. �i �� ������� �� ������ ��� ���\n" "���������� ����i, �i ������i�� �������� �������i������ ������\n" "� ������� ���������� i��������i? �������, ����i������� ��������\n" "�� �������� ����'�����, ��� ��� �i���� �� �����i��." #: ../../any.pm_.c:547 msgid "Autoprobe" msgstr "���������" #: ../../any.pm_.c:547 msgid "Specify options" msgstr "�������� ���������" #: ../../any.pm_.c:551 #, c-format msgid "You may now provide its options to module %s." msgstr "�� �� ������ ������ ����i ������ %s." #: ../../any.pm_.c:557 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "�� �� ������ ������ ����i ������ %s.\n" "����i - � ������� ``i��=�������� i��2=��������2 ...''.\n" "���������, ``io=0x300 irq=7''" #: ../../any.pm_.c:560 msgid "Module options:" msgstr "����i ������:" #: ../../any.pm_.c:570 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "�������� ������ %s �� �������.\n" "������� ������������ � i����i ����������i?" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #: ../../bootloader.pm_.c:234 #, fuzzy, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "Welcome to %s the operating system chooser!\n" "\n" "To list the possible choices, press <TAB>.\n" "\n" "To load one of them, write its name and press <ENTER> or\n" "wait %d seconds for default boot.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:596 msgid "Welcome to GRUB the operating system chooser!" msgstr "Welcome to GRUB the operating system chooser!" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:597 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:598 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Press enter to boot the selected OS, 'e' to edit the" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:599 msgid "commands before booting, or 'c' for a command-line." msgstr "commands before booting, or 'c' for a command-line." # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # and only one line per string for the GRUB messages # #: ../../bootloader.pm_.c:600 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "The highlighted entry will be booted automatically in %d seconds." #: ../../bootloader.pm_.c:604 msgid "not enough room in /boot" msgstr "�� ����� ����� � �������� /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:696 msgid "Desktop" msgstr "������� ����" #: ../../bootloader.pm_.c:696 msgid "Start Menu" msgstr "������� ����" #: ../../common.pm_.c:610 #, c-format msgid "%d minutes" msgstr "%d ��i�i�" #: ../../common.pm_.c:612 msgid "1 minute" msgstr "1 ��i�i��" #: ../../common.pm_.c:614 #, c-format msgid "%d seconds" msgstr "%d ������" #: ../../diskdrake.pm_.c:21 ../../diskdrake.pm_.c:419 msgid "Create" msgstr "��������" #: ../../diskdrake.pm_.c:22 msgid "Unmount" msgstr "�������i������" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:421 msgid "Delete" msgstr "��i�����" #: ../../diskdrake.pm_.c:23 msgid "Format" msgstr "������i�������" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:602 msgid "Resize" msgstr "�������� ������" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:419 #: ../../diskdrake.pm_.c:472 msgid "Type" msgstr "���" #: ../../diskdrake.pm_.c:24 ../../diskdrake.pm_.c:492 msgid "Mount point" msgstr "������ ����i�������" #: ../../diskdrake.pm_.c:38 msgid "Write /etc/fstab" msgstr "���i� /etc/fstab" #: ../../diskdrake.pm_.c:39 msgid "Toggle to expert mode" msgstr "����� ��������" #: ../../diskdrake.pm_.c:40 msgid "Toggle to normal mode" msgstr "�������� �����" #: ../../diskdrake.pm_.c:41 msgid "Restore from file" msgstr "��������� � �����" #: ../../diskdrake.pm_.c:42 msgid "Save in file" msgstr "��������� � ����" #: ../../diskdrake.pm_.c:43 msgid "Wizard" msgstr "������� ���������" #: ../../diskdrake.pm_.c:44 msgid "Restore from floppy" msgstr "��������� � �������" #: ../../diskdrake.pm_.c:45 msgid "Save on floppy" msgstr "��������� �� �������" #: ../../diskdrake.pm_.c:49 msgid "Clear all" msgstr "�����i�� ��" #: ../../diskdrake.pm_.c:50 msgid "Format all" msgstr "������i������ ��" #: ../../diskdrake.pm_.c:51 msgid "Auto allocate" msgstr "������������ ����������" #: ../../diskdrake.pm_.c:54 msgid "All primary partitions are used" msgstr "��� ��������� �������� �����������" #: ../../diskdrake.pm_.c:54 msgid "I can't add any more partition" msgstr "������ ������� ���������" #: ../../diskdrake.pm_.c:54 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "��� ����i�� ����� �������, �����i�� ���i� i �������� �������� ������� " "(extended)" #: ../../diskdrake.pm_.c:57 msgid "Rescue partition table" msgstr "���������� ����i�� ��������" #: ../../diskdrake.pm_.c:58 msgid "Undo" msgstr "�����" #: ../../diskdrake.pm_.c:59 msgid "Write partition table" msgstr "���i� ����i�� ��������" #: ../../diskdrake.pm_.c:60 msgid "Reload" msgstr "����������i��" #: ../../diskdrake.pm_.c:101 msgid "loopback" msgstr "�i��������� �������� �i����� (loopback)" #: ../../diskdrake.pm_.c:114 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake.pm_.c:114 msgid "FAT" msgstr "FAT" #: ../../diskdrake.pm_.c:114 msgid "HFS" msgstr "HFS" #: ../../diskdrake.pm_.c:114 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake.pm_.c:114 msgid "Swap" msgstr "Swap" #: ../../diskdrake.pm_.c:115 msgid "Empty" msgstr "�����" #: ../../diskdrake.pm_.c:115 ../../mouse.pm_.c:125 msgid "Other" msgstr "����i�" #: ../../diskdrake.pm_.c:121 msgid "Filesystem types:" msgstr "���� �������� �i�����:" #: ../../diskdrake.pm_.c:130 msgid "Details" msgstr "������������i" #: ../../diskdrake.pm_.c:144 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "����� �� ����� �����i ���i� ���i�i ������� FAT\n" "(�������� �������������� MicroSoft Dos/Windows).\n" "��������, ��-������, ����i�� ������ ��������\n" "(��i��i�� �� ���, � ����� �� \"�������� ������\")" #: ../../diskdrake.pm_.c:149 msgid "Please make a backup of your data first" msgstr "��-������, ����i�� ���������� ���i� ����� ��������" #: ../../diskdrake.pm_.c:149 ../../diskdrake.pm_.c:166 #: ../../diskdrake.pm_.c:175 ../../diskdrake.pm_.c:524 #: ../../diskdrake.pm_.c:546 msgid "Read carefully!" msgstr "������� �����i��!" #: ../../diskdrake.pm_.c:152 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "���i �� �������� ������������� boot ��������, �� �������i�� ��\n" " �� ����� �� 2048 ������� �� ������� �����" #: ../../diskdrake.pm_.c:166 msgid "Be careful: this operation is dangerous." msgstr "������� �����i��. ����� �������� ������ �����i��" #: ../../diskdrake.pm_.c:203 ../../install_steps.pm_.c:73 #: ../../install_steps_interactive.pm_.c:38 #: ../../install_steps_interactive.pm_.c:315 ../../standalone/diskdrake_.c:60 #: ../../standalone/rpmdrake_.c:294 ../../standalone/rpmdrake_.c:304 msgid "Error" msgstr "�������" #: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:694 msgid "Mount point: " msgstr "������ ����i�������:" #: ../../diskdrake.pm_.c:228 ../../diskdrake.pm_.c:269 msgid "Device: " msgstr "�������:" #: ../../diskdrake.pm_.c:229 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "�i���� ��� DOS-�����: %s (�����)\n" #: ../../diskdrake.pm_.c:230 ../../diskdrake.pm_.c:272 msgid "Type: " msgstr "���: " #: ../../diskdrake.pm_.c:231 #, c-format msgid "Start: sector %s\n" msgstr "�������: ������ %s\n" #: ../../diskdrake.pm_.c:232 #, c-format msgid "Size: %d MB" msgstr "�����: %d MB" #: ../../diskdrake.pm_.c:234 #, c-format msgid ", %s sectors" msgstr ", %s �������" #: ../../diskdrake.pm_.c:236 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "���i���� � %d �� %d\n" #: ../../diskdrake.pm_.c:237 msgid "Formatted\n" msgstr "������i�������\n" #: ../../diskdrake.pm_.c:238 msgid "Not formatted\n" msgstr "�� ��������i������\n" #: ../../diskdrake.pm_.c:239 msgid "Mounted\n" msgstr "������i������\n" #: ../../diskdrake.pm_.c:240 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake.pm_.c:241 #, c-format msgid "Loopback file(s): %s\n" msgstr "����(�) �i��������� �������� �i�����: %s\n" #: ../../diskdrake.pm_.c:242 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "���������� ������� �� ���������\n" " (��� �������i MS-DOS, � �� ��� lilo)\n" #: ../../diskdrake.pm_.c:244 #, c-format msgid "Level %s\n" msgstr "�������� %s\n" #: ../../diskdrake.pm_.c:245 #, c-format msgid "Chunk size %s\n" msgstr "����� ��������� %s\n" #: ../../diskdrake.pm_.c:246 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-����i %s\n" #: ../../diskdrake.pm_.c:248 #, c-format msgid "Loopback file name: %s" msgstr "I�� ����� �i��������� �������� �i�����: %s" #: ../../diskdrake.pm_.c:265 msgid "Please click on a partition" msgstr "����i�� �� �������" #: ../../diskdrake.pm_.c:270 #, c-format msgid "Size: %d MB\n" msgstr "�����: %d MB\n" #: ../../diskdrake.pm_.c:271 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "���������: %s ���i����, %s �������, %s �������\n" #: ../../diskdrake.pm_.c:273 #, c-format msgid "Partition table type: %s\n" msgstr "��� ����i�� ��������: %s\n" #: ../../diskdrake.pm_.c:274 #, c-format msgid "on bus %d id %d\n" msgstr "�� ���� %d id %d\n" #: ../../diskdrake.pm_.c:287 msgid "Mount" msgstr "����i�������" #: ../../diskdrake.pm_.c:288 msgid "Active" msgstr "�������" #: ../../diskdrake.pm_.c:289 msgid "Add to RAID" msgstr "������ �� RAID" #: ../../diskdrake.pm_.c:290 msgid "Remove from RAID" msgstr "�����i�� � RAID" #: ../../diskdrake.pm_.c:291 msgid "Modify RAID" msgstr "����i�� RAID" #: ../../diskdrake.pm_.c:292 msgid "Use for loopback" msgstr "������������� ��� �i��������� �������� �i�����" #: ../../diskdrake.pm_.c:299 msgid "Choose action" msgstr "�������� �������" #: ../../diskdrake.pm_.c:392 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "��������, ��� ������ �������� /boot �� ����� ����� (�� ���i���� > 1024).\n" "����� �� �������������� LILO - ���� ���� �� ����� ���������, ����� LILO �� " "��������������, i ���� /boot �� ��������." #: ../../diskdrake.pm_.c:396 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "������� ��� ������� � �����i ��������� (/) ������� �i�i��� �������i�� �����\n" "1024-�� ���i���� ��������� �����, � � ��� ���� �������� /boot .\n" "���i ����� �������������� �������� �������i LILO, �� ����������� ������\n" "������� /boot" #: ../../diskdrake.pm_.c:402 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "�� ������i RAID ������� �� �������.\n" "���� ����������, ��i � ������i��� ��� /boot ��������.\n" "������� ������ /boot, ���i �����." #: ../../diskdrake.pm_.c:419 ../../diskdrake.pm_.c:421 #, c-format msgid "Use ``%s'' instead" msgstr "�������������� ``%s'' ������" #: ../../diskdrake.pm_.c:424 msgid "Use ``Unmount'' first" msgstr "�������� ����i�� ``Unmount''" #: ../../diskdrake.pm_.c:425 ../../diskdrake.pm_.c:467 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "��� �������� � �������� %s ������ �������� ����� ����� ��� ����" #: ../../diskdrake.pm_.c:437 msgid "Continue anyway?" msgstr "������� ����������?" #: ../../diskdrake.pm_.c:442 msgid "Quit without saving" msgstr "�����i ��� ���������" #: ../../diskdrake.pm_.c:442 msgid "Quit without writing the partition table?" msgstr "�����i ��� ���i�� ����i�� ��������" #: ../../diskdrake.pm_.c:470 msgid "Change partition type" msgstr "����i�� ��� ��������" #: ../../diskdrake.pm_.c:471 #, fuzzy msgid "Which filesystem do you want?" msgstr "�������� ����" #: ../../diskdrake.pm_.c:474 ../../diskdrake.pm_.c:726 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "�� �� ������ ����i���� �� �������, ����� ��i� ����� �� 32 ��" #: ../../diskdrake.pm_.c:490 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "���� �� ������� �����i������ �i��������� ������� %s?" #: ../../diskdrake.pm_.c:491 #, c-format msgid "Where do you want to mount device %s?" msgstr "���� �� ������� �����i������ ������� %s?" #: ../../diskdrake.pm_.c:496 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "������ ���������� ������ ����i�������, ���� ��� ������ ��������������� ���\n" "�i��������� �������� �i�����.\n" "�������� �����i�� �i��������� �i�����" #: ../../diskdrake.pm_.c:515 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "��� �������� � �������� %s ������ �������� ����� ��������������" #: ../../diskdrake.pm_.c:517 msgid "Formatting" msgstr "������i�������" #: ../../diskdrake.pm_.c:518 #, c-format msgid "Formatting loopback file %s" msgstr "������i������� �i���������� �������� %s" #: ../../diskdrake.pm_.c:519 ../../install_steps_interactive.pm_.c:402 #, c-format msgid "Formatting partition %s" msgstr "������i������� �������� %s" #: ../../diskdrake.pm_.c:524 msgid "After formatting all partitions," msgstr "����� ������i������� ��i� ��������," #: ../../diskdrake.pm_.c:524 msgid "all data on these partitions will be lost" msgstr "��� �������� � ����� ��������� ������ ��������" #: ../../diskdrake.pm_.c:530 msgid "Move" msgstr "������������" #: ../../diskdrake.pm_.c:531 msgid "Which disk do you want to move it to?" msgstr "�� ��i ���� ��������i��?" #: ../../diskdrake.pm_.c:532 msgid "Sector" msgstr "������" #: ../../diskdrake.pm_.c:533 msgid "Which sector do you want to move it to?" msgstr "�� ��i ������ ��������i��?" #: ../../diskdrake.pm_.c:536 msgid "Moving" msgstr "�����������" #: ../../diskdrake.pm_.c:536 msgid "Moving partition..." msgstr "������������ �������..." #: ../../diskdrake.pm_.c:546 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "����i�� ����������� ������� %s ����� ���i���� �� ����!" #: ../../diskdrake.pm_.c:548 msgid "You'll need to reboot before the modification can take place" msgstr "��� �������i �����i�i � �������, ��������� ����������i���" #: ../../diskdrake.pm_.c:569 msgid "Computing FAT filesystem bounds" msgstr "���i����� ���� �������� �i����� FAT" #: ../../diskdrake.pm_.c:569 ../../diskdrake.pm_.c:629 #: ../../install_interactive.pm_.c:107 msgid "Resizing" msgstr "�������� ������" #: ../../diskdrake.pm_.c:592 #, fuzzy msgid "This partition is not resizeable" msgstr "������ ����� �������� �� ������� ����i��?" #: ../../diskdrake.pm_.c:597 msgid "All data on this partition should be backed-up" msgstr "��� �������� � ����� �������� ���i��� ���� �'���i�i������" #: ../../diskdrake.pm_.c:599 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "��� �������� � �������� %s ������ ��������" #: ../../diskdrake.pm_.c:609 msgid "Choose the new size" msgstr "����� ����� ������" #: ../../diskdrake.pm_.c:609 ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 #: ../../install_steps_interactive.pm_.c:518 #: ../../partition_table_raw.pm_.c:101 msgid "MB" msgstr "��" #: ../../diskdrake.pm_.c:666 msgid "Create a new partition" msgstr "��������� ������ ��������" #: ../../diskdrake.pm_.c:686 msgid "Start sector: " msgstr "��������� ������:" #: ../../diskdrake.pm_.c:690 ../../diskdrake.pm_.c:765 msgid "Size in MB: " msgstr "����� � ��:" #: ../../diskdrake.pm_.c:693 ../../diskdrake.pm_.c:768 msgid "Filesystem type: " msgstr "��� �������� �i�����:" #: ../../diskdrake.pm_.c:696 msgid "Preference: " msgstr "���������: " #: ../../diskdrake.pm_.c:744 msgid "This partition can't be used for loopback" msgstr "���� ������� �� ���� ���� ����������� ��� �i��������� �������� �i�����" #: ../../diskdrake.pm_.c:754 msgid "Loopback" msgstr "�i��������� �������� �i����� (loopback)" #: ../../diskdrake.pm_.c:764 msgid "Loopback file name: " msgstr "I�� �i���������� ��������" #: ../../diskdrake.pm_.c:790 msgid "File already used by another loopback, choose another one" msgstr "" "���� ��� ��������������� i���� �i��������� �i������. ���i �����, \n" "�������� i���� �����" #: ../../diskdrake.pm_.c:791 msgid "File already exists. Use it?" msgstr "���� ��� i����. ����������� ���?" #: ../../diskdrake.pm_.c:813 ../../diskdrake.pm_.c:829 msgid "Select file" msgstr "�������� ����" #: ../../diskdrake.pm_.c:822 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "����i�� ����������� ����������� ����� ��� i��� �����\n" "���-���i i��i �������?" #: ../../diskdrake.pm_.c:830 msgid "Warning" msgstr "�����!" #: ../../diskdrake.pm_.c:831 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "������ ������� � ��������\n" "��� �������� �� ����� ������� ������ ��������" #: ../../diskdrake.pm_.c:842 msgid "Trying to rescue partition table" msgstr "���������� ���������� ����i�� ��������" #: ../../diskdrake.pm_.c:853 msgid "device" msgstr "�������" #: ../../diskdrake.pm_.c:854 msgid "level" msgstr "��������" #: ../../diskdrake.pm_.c:855 msgid "chunk size" msgstr "����� �����" #: ../../diskdrake.pm_.c:867 msgid "Choose an existing RAID to add to" msgstr "�������� i������ RAID ��� ���������" #: ../../diskdrake.pm_.c:868 msgid "new" msgstr "����" #: ../../fs.pm_.c:88 ../../fs.pm_.c:95 ../../fs.pm_.c:101 ../../fs.pm_.c:107 #, c-format msgid "%s formatting of %s failed" msgstr "%s ������� ������i������� %s" #: ../../fs.pm_.c:133 #, c-format msgid "I don't know how to format %s in type %s" msgstr "�� ����� �� ��������i������ %s � ����� %s" #: ../../fs.pm_.c:218 msgid "mount failed: " msgstr "������� ����i�������: " #: ../../fs.pm_.c:230 #, c-format msgid "error unmounting %s: %s" msgstr "������� �������i������� %s: %s" #: ../../fsedit.pm_.c:235 msgid "Mount points must begin with a leading /" msgstr "����� ����i������� ���i��� ��������� � /" #: ../../fsedit.pm_.c:238 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "��� ���� ������� � ������� ����i������� %s\n" #: ../../fsedit.pm_.c:246 #, c-format msgid "Circular mounts %s\n" msgstr "����i������� ����� %s\n" #: ../../fsedit.pm_.c:258 msgid "This directory should remain within the root filesystem" msgstr "���� ������� ������ ���������� ������ ��������� �������� ������" #: ../../fsedit.pm_.c:259 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" "��� ��������� ������ ����i���� ��� �������� �i����� (ext2, reiserfs)\n" "��� ����� �����i ����i�������\n" #: ../../fsedit.pm_.c:335 #, c-format msgid "Error opening %s for writing: %s" msgstr "������� �������� %s ��� ���i��: %s" #: ../../fsedit.pm_.c:417 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "�������: ��� ��������� ����� �������� �i���� �� ��������� ���������� \n" "�������. �������� ������������ ��� ������ i�������� �������." #: ../../fsedit.pm_.c:431 msgid "You don't have any partitions!" msgstr "�� �� �������i ��i��i� ��������!" #: ../../help.pm_.c:9 #, fuzzy msgid "" "Please choose your preferred language for installation and system usage." msgstr "�������� ���� �������i i ������ �i�����" #: ../../help.pm_.c:12 msgid "" "You need to accept the terms of the above license to continue installation.\n" "\n" "\n" "Please click on \"Accept\" if you agree with its terms.\n" "\n" "\n" "Please click on \"Refuse\" if you disagree with its terms. Installation will " "end without modifying your current\n" "configuration." msgstr "" #: ../../help.pm_.c:22 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "�������� ��������� ���� ����i����� � ������������ ��i��" #: ../../help.pm_.c:25 msgid "" "If you wish other languages (than the one you choose at\n" "beginning of installation) will be available after installation, please " "chose\n" "them in list above. If you want select all, you just need to select \"All\"." msgstr "" #: ../../help.pm_.c:30 msgid "" "Please choose \"Install\" if there are no previous version of " "Linux-Mandrake\n" "installed or if you wish to use several operating systems.\n" "\n" "\n" "Please choose \"Update\" if you wish to update an already installed version " "of Linux-Mandrake.\n" "\n" "\n" "Depend of your knowledge in GNU/Linux, you can choose one of the following " "levels to install or update your\n" "Linux-Mandrake operating system:\n" "\n" "\t* Recommanded: if you have never installed a GNU/Linux operating system " "choose this. Installation will be\n" "\t be very easy and you will be asked only on few questions.\n" "\n" "\n" "\t* Customized: if you are familiar enough with GNU/Linux, you may choose " "the primary usage (workstation, server,\n" "\t development) of your sytem. You will need to answer to more questions " "than in \"Recommanded\" installation\n" "\t class, so you need to know how GNU/Linux works to choose this " "installation class.\n" "\n" "\n" "\t* Expert: if you have a good knowledge in GNU/Linux, you can choose this " "installation class. As in \"Customized\"\n" "\t installation class, you will be able to choose the primary usage " "(workstation, server, development). Be very\n" "\t careful before choose this installation class. You will be able to " "perform a higly customized installation.\n" "\t Answer to some questions can be very difficult if you haven't a good " "knowledge in GNU/Linux. So, don't choose\n" "\t this installation class unless you know what you are doing." msgstr "" #: ../../help.pm_.c:56 msgid "" "Select:\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!" msgstr "" "��������: \n" "\n" " - �� ������: ���� ����� ������������� � ��� �������, ���i �� ��������i \n" " ����� � GNU/Linux, i ������� ���i ������� ����������\n" " ������ i ������������ ��� ������ ���������. �����i�� �i��� " "�������������.\n" "\n" "\n" " - �������: ����� ������ ������ ��������, ��� �� �������� ��������� " "GNU/Linux\n" " i ������� ������������� �����i �������� ����븢��. �� i � ������� \n" " \"�� ������\"��� �������� ����� ������� ���������� �������� i \n" " ������������ ������ ���������.\n" " ���i �����, �� ���I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� " "����I����!" #: ../../help.pm_.c:68 #, fuzzy msgid "" "You must now define your machine usage. Choices are:\n" "\n" "\t* Workstation: this the ideal choice if you intend to use your machine " "primarily for everyday use, at office or\n" "\t at home.\n" "\n" "\n" "\t* Development: if you intend to use your machine primarily for software " "development, it is the good choice. You\n" "\t will then have a complete collection of software installed in order to " "compile, debug and format source code,\n" "\t or create software packages.\n" "\n" "\n" "\t* Server: if you intend to use this machine as a server, it is the good " "choice. Either a file server (NFS or\n" "\t SMB), a print server (Unix style or Microsoft Windows style), an " "authentication server (NIS), a database\n" "\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, etc.) " "to be installed." msgstr "" "������ ���� �������������� ������ ��������� (���i, �� ������i ��� " "����븢�i\n" " \"�� ������\" ����� \"�������\") ���������:\n" "\n" " - ��������: �������� ���� ���, ���i ��� �������� ����� �������������� " "���\n" " ��i���� ����� (������ ������, ����i�i i ����� �����). ����� �� �����,\n" " ��� � ���i� ������� �� ������ ���������� �i ���i� � ����i������, " "������\n" " ���������i i ����� �����.\n" "\n" " - ��� ���������i: ���� ����� ���� ��� ��� ��������. �������� ���� ���,\n" " ���i �������� ����� �������������� ��� ����������� �������. � �����\n" " ������� � ��� ����� ����� �������� ������ ��� ����i����i, �������i " "����,\n" " ������i������� ��������� ���� ����� ���i����� ������ �������.\n" "\n" " - ������: �������� ���� ���, ���i ������, �� ���� ����� ���������� " "Linux-Mandrake,\n" " ����� �������������� �� ������. ���������, �� ������� ������ (NFS ����� " "SMB),\n" " ������ ����� (���� ���� ���� ����������� �� ���� ��������� UNIX lp (Line " "Printer) �i SMB),\n" " ������ ���i������i ����������i�� (NIS), ������ ��� �������� i �.�.\n" " � ���i� ������� ����i���� �i����� ���� KDE, GNOME i �.�. ���������� �� " "������.\n" #: ../../help.pm_.c:84 #, fuzzy msgid "" "DrakX will attempt to look for PCI SCSI adapter(s). If DrakX\n" "finds an SCSI adapter and knows which driver to use, it will be " "automatically\n" "installed.\n" "\n" "\n" "If you have no SCSI adapter, an ISA SCSI adapter or a PCI SCSI adapter that\n" "DrakX doesn't recognize, you will be asked if a SCSI adapter is present in " "your\n" "system. If there is no adapter present, you can click on \"No\". If you " "click on\n" "\"Yes\", a list of drivers will be presented from which you can select your\n" "specific adapter.\n" "\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for " "the\n" "options. This usually works well.\n" "\n" "\n" "If not, you will need to provide options to the driver. Please review the " "User\n" "Guide (chapter 3, section \"Collective informations on your hardware) for " "hints\n" "on retrieving this information from hardware documentation, from the\n" "manufacturer's Web site (if you have Internet access) or from Microsoft " "Windows\n" "(if you have it on your system)." msgstr "" "DrakX ����� ���������� ��������� PCI SCSI �������(�).\n" "���i DrakX ������� SCSI ������� i ����� ������ ��������� ��� ��� �������, " "��\n" "���������� ������� ��� (i�) � �i�����.\n" "\n" "���i �� ����� �� SCSI �������, ISA SCSI ������� ����� \n" "PCI SCSI �������, ��i DrakX �� ���� ���������, � ��� ����������, �i\n" "���� ��i SCSI ������� � ����� �i�����. ���i ������ �������� ����,\n" "�� ������ ���i����� �� '��'. ���i �� �������� '���', ��i� �������� �����\n" "��� ����������� i � ����� �� ������ ������� ��� ������i��� �������.\n" "\n" "\n" "���i �� ������i ��� ������i��� ������� ����������, DrakX �����\n" "���������� ��� ���������, ��i� �� ������� ��������� ��� ���. ���\n" "��������� ������i�� DrakX ������������ ��������� ����� ���������.\n" "�������� �� ���� ������i �����.\n" "\n" "���i �� ����������, ��� ��������� ��������� ������ ����� ���������.\n" "��������� ��� �������� ��������� ��� ������ �������� �� ������,\n" "��������� ���������� ��������i ��� ��� � Windows (���i ����� �i����� � ���\n" "����������), ����i���� ������������ ����� ������ web ����� �������� (���i\n" "����� ������ �� Internet)." #: ../../help.pm_.c:108 msgid "" "At this point, you need to choose where to install your\n" "Linux-Mandrake operating system on your hard drive. If it is empty or if an\n" "existing operating system uses all the space available on it, you need to\n" "partition it. Basically, partitioning a hard drive consists of logically\n" "dividing it to create space to install your new Linux-Mandrake system.\n" "\n" "\n" "Because the effects of the partitioning process are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced " "user.\n" "This wizard simplifies this process. Before beginning, please consult the " "manual\n" "and take your time.\n" "\n" "\n" "You need at least two partitions. One is for the operating system itself and " "the\n" "other is for the virtual memory (also called Swap).\n" "\n" "\n" "If partitions have been already defined (from a previous installation or " "from\n" "another partitioning tool), you just need choose those to use to install " "your\n" "Linux system.\n" "\n" "\n" "If partitions haven't been already defined, you need to create them. \n" "To do that, use the wizard available above. Depending of your hard drive\n" "configuration, several solutions can be available:\n" "\n" "\t* Use existing partition: the wizard has detected one or more existing " "Linux partitions on your hard drive. If\n" "\t you want to keep them, choose this option. \n" "\n" "\n" "\t* Erase entire disk: if you want delete all data and all partitions " "present on your hard drive and replace them by\n" "\t your new Linux-Mandrake system, you can choose this option. Be careful " "with this solution, you will not be\n" "\t able to revert your choice after confirmation.\n" "\n" "\n" "\t* Use the free space on the Windows partition: if Microsoft Windows is " "installed on your hard drive and takes\n" "\t all space available on it, you have to create free space for Linux data. " "To do that you can delete your\n" "\t Microsoft Windows partition and data (see \"Erase entire disk\" or " "\"Expert mode\" solutions) or resize your\n" "\t Microsoft Windows partition. Resizing can be performed without loss of " "any data. This solution is\n" "\t recommended if you want use both Linux-Mandrake and Microsoft Windows on " "same computer.\n" "\n" "\n" "\t Before choosing this solution, please understand that the size of your " "Microsoft\n" "\t Windows partition will be smaller than at present time. It means that " "you will have less free space under\n" "\t Microsoft Windows to store your data or install new software.\n" "\n" "\n" "\t* Expert mode: if you want to partition manually your hard drive, you can " "choose this option. Be careful before\n" "\t choosing this solution. It is powerful but it is very dangerous. You can " "lose all your data very easily. So,\n" "\t don't choose this solution unless you know what you are doing." msgstr "" #: ../../help.pm_.c:160 msgid "" "At this point, you need to choose what\n" "partition(s) to use to install your new Linux-Mandrake system. If " "partitions\n" "have been already defined (from a previous installation of GNU/Linux or " "from\n" "another partitioning tool), you can use existing partitions. In other " "cases,\n" "hard drive partitions must be defined.\n" "\n" "\n" "To create partitions, you must first select a hard drive. You can select " "the\n" "disk for partitioning by clicking on \"hda\" for the first IDE drive, " "\"hdb\" for\n" "the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * Clear all: this option deletes all partitions available on the selected " "hard drive.\n" "\n" "\n" " * Auto allocate:: this option allows you to automatically create Ext2 and " "swap partitions in free space of your\n" " hard drive.\n" "\n" "\n" " * Rescue partition table: if your partition table is damaged, you can try " "to recover it using this option. Please\n" " be careful and remember that it can fail.\n" "\n" "\n" " * Undo: you can use this option to cancel your changes.\n" "\n" "\n" " * Reload: you can use this option if you wish to undo all changes and " "load your initial partitions table\n" "\n" "\n" " * Wizard: If you wish to use a wizard to partition your hard drive, you " "can use this option. It is recommended if\n" " you do not have a good knowledge in partitioning.\n" "\n" "\n" " * Restore from floppy: if you have saved your partition table on a floppy " "during a previous installation, you can\n" " recover it using this option.\n" "\n" "\n" " * Save on floppy: if you wish to save your partition table on a floppy to " "be able to recover it, you can use this\n" " option. It is strongly recommended to use this option\n" "\n" "\n" " * Done: when you have finished partitioning your hard drive, use this " "option to save your changes.\n" "\n" "\n" "For information, you can reach any option using the keyboard: navigate " "trough the partitions using Tab and Up/Down arrows.\n" "\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when a empty partition is " "selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point" msgstr "" #: ../../help.pm_.c:218 msgid "" "Above are listed the existing Linux partitions detected on\n" "your hard drive. You can keep choices make by the wizard, they are good for " "a\n" "common usage. If you change these choices, you must at least define a root\n" "partition (\"/\"). Don't choose a too little partition or you will not be " "able\n" "to install enough software. If you want store your data on a separate " "partition,\n" "you need also to choose a \"/home\" (only possible if you have more than " "one\n" "Linux partition available).\n" "\n" "\n" "For information, each partition is listed as follows: \"Name\", " "\"Capacity\".\n" "\n" "\n" "\"Name\" is coded as follow: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and " "\"sd\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE " "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc..." msgstr "" #: ../../help.pm_.c:252 msgid "" "Choose the hard drive you want to erase to install your\n" "new Linux-Mandrake partition. Be careful, all data present on it will be " "lost\n" "and will not be recoverable." msgstr "" #: ../../help.pm_.c:257 msgid "" "Click on \"OK\" if you want to delete all data and\n" "partitions present on this hard drive. Be careful, after clicking on \"OK\", " "you\n" "will not be able to recover any data and partitions present on this hard " "drive,\n" "including any Windows data.\n" "\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../help.pm_.c:267 msgid "" "More than one Microsoft Windows partition have been\n" "detected on your hard drive. Please choose the one you want resize to " "install\n" "your new Linux-Mandrake operating system.\n" "\n" "\n" "For information, each partition is listed as follow; \"Linux name\", " "\"Windows\n" "name\" \"Capacity\".\n" "\n" "\"Linux name\" is coded as follow: \"hard drive type\", \"hard drive " "number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and " "\"sd\"\n" "if it is an SCSI hard drive.\n" "\n" "\n" "\"Hard drive number\" is always a letter putted after \"hd\" or \"sd\". With " "IDE hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\",\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\",\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\",\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, a \"a\" means \"primary hard drive\", a \"b\" means " "\"secondary hard drive\", etc.\n" "\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first " "disk\n" "or partition is called \"C:\")." msgstr "" #: ../../help.pm_.c:300 msgid "Please be patient. This operation can take several minutes." msgstr "" #: ../../help.pm_.c:303 msgid "" "Any partitions that have been newly defined must be\n" "formatted for use (formatting meaning creating a filesystem).\n" "\n" "\n" "At this time, you may wish to reformat some already existing partitions to " "erase\n" "the data they contain. If you wish do that, please also select the " "partitions\n" "you want to format.\n" "\n" "\n" "Please note that it is not necessary to reformat all pre-existing " "partitions.\n" "You must reformat the partitions containing the operating system (such as " "\"/\",\n" "\"/usr\" or \"/var\") but do you no have to reformat partitions containing " "data\n" "that you wish to keep (typically /home).\n" "\n" "\n" "Please be careful selecting partitions, after formatting, all data will be\n" "deleted and you will not be able to recover any of them.\n" "\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "\n" "Click on \"Cancel\" if you want to choose other partitions to install your " "new\n" "Linux-Mandrake operating system." msgstr "" #: ../../help.pm_.c:329 #, fuzzy msgid "" "You may now select the group of packages you wish to\n" "install or upgrade.\n" "\n" "\n" "DrakX will then check whether you have enough room to install them all. If " "not,\n" "it will warn you about it. If you want to go on anyway, it will proceed onto " "the\n" "installation of all selected groups but will drop some packages of lesser\n" "interest. At the bottom of the list you can select the option \n" "\"Individual package selection\"; in this case you will have to browse " "through\n" "more than 1000 packages..." msgstr "" "����� �� ������ ��������� ����� ������, ��i� �� �������\n" "���������� �i �����i��.\n" "\n" "DrakX ����� ��������� ���������, �i ����� �� �������� ����� ��� i� " "����븢�i.���i ��,\n" "�� ������� ��������� �� �����. ���i �� ������� ��������� ����븢�� � ����� " "�������,\n" "������ �� ���� ������� ������ � ������� �� ����� ����������. � �i�� ��i��\n" "�� ������ ��������� \"����i��� ����� ������\". � ���i� �������\n" "�� ������� ����������� ����� ��� �� 1000 ������..." #: ../../help.pm_.c:341 msgid "" "You can now choose individually all the packages you\n" "wish to install.\n" "\n" "\n" "You can expand or collapse the tree by clicking on options in the left " "corner of\n" "the packages window.\n" "\n" "\n" "If you prefer to see packages sorted in alphabetic order, click on the icon\n" "\"Toggle flat and group sorted\".\n" "\n" "\n" "If you want not to be warned on dependencies, click on \"Automatic\n" "dependencies\". If you do this, note that unselecting one package may " "silently\n" "unselect several other packages which depend on it." msgstr "" #: ../../help.pm_.c:358 #, fuzzy msgid "" "If you have all the CDs in the list above, click Ok. If you have\n" "none of those CDs, click Cancel. If only some CDs are missing, unselect " "them,\n" "then click Ok." msgstr "" "���i �� ����� ��� CD ����i �� ��i�� �����, �� ���i��i�� �� O�.\n" "���i �� ����� �i ������ � ����� CD �����, ��� ���i��i�� �����i��.\n" "���i ��������� � CD ����i ��������, �����i�� i� ���������� i ���i��i�� �� �k." #: ../../help.pm_.c:363 msgid "" "Your new Linux-Mandrake operating system is currently being\n" "installed. This operation should take a few minutes (it depends on size you\n" "choose to install and the speed of your computer).\n" "\n" "\n" "Please be patient." msgstr "" #: ../../help.pm_.c:371 msgid "" "You can now test your mouse. Use buttons and wheel to verify\n" "if settings are good. If not, you can click on \"Cancel\" to choose another\n" "driver." msgstr "" #: ../../help.pm_.c:376 #, fuzzy msgid "" "Please select the correct port. For example, the COM1\n" "port under MS Windows is named ttyS0 under GNU/Linux." msgstr "" "����i���� �������� ����. ���������, ���� COM1 � MS Windows\n" "� Linux ��� ����� ttyS0." #: ../../help.pm_.c:380 msgid "" "If you wish to connect your computer to the Internet or\n" "to a local network please choose the correct option. Please turn on your " "device\n" "before choosing the correct option to let DrakX detect it automatically.\n" "\n" "\n" "If you do not have any connection to the Internet or a local network, " "choose\n" "\"Disable networking\".\n" "\n" "\n" "If you wish to configure the network later after installation or if you " "have\n" "finished to configure your network connection, choose \"Done\"." msgstr "" #: ../../help.pm_.c:393 msgid "" "No modem has been detected. Please select the serial port on which it is " "plugged.\n" "\n" "\n" "For information, the first serial port (called \"COM1\" under Microsoft\n" "Windows) is called \"ttyS0\" under Linux." msgstr "" #: ../../help.pm_.c:400 msgid "" "You may now enter dialup options. If you don't know\n" "or are not sure what to enter, the correct informations can be obtained " "from\n" "your Internet Service Provider. If you do not enter the DNS (name server)\n" "information here, this information will be obtained from your Internet " "Service\n" "Provider at connection time." msgstr "" #: ../../help.pm_.c:407 msgid "" "If your modem is an external modem, please turn on it now to let DrakX " "detect it automatically." msgstr "" #: ../../help.pm_.c:410 msgid "Please turn on your modem and choose the correct one." msgstr "" #: ../../help.pm_.c:413 msgid "" "If you are not sure if informations above are\n" "correct or if you don't know or are not sure what to enter, the correct\n" "informations can be obtained from your Internet Service Provider. If you do " "not\n" "enter the DNS (name server) information here, this information will be " "obtained\n" "from your Internet Service Provider at connection time." msgstr "" #: ../../help.pm_.c:420 #, fuzzy msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, the correct informations can be\n" "obtained from your Internet Service Provider." msgstr "" "����� ����� �����i ��������� �������� ���� ����� (dialup). ���i ��\n" "�� �������, ��� �������� �i����,\n" "����������� �������� ��������� i��������� � ������ ���������� Internet (ISP)." #: ../../help.pm_.c:425 #, fuzzy msgid "" "You may now configure your network device.\n" "\n" " * IP address: if you don't know or are not sure what to enter, ask your " "network administrator.\n" " You should not enter an IP address if you select the option \"Automatic " "IP\" below.\n" "\n" " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't " "know or are not sure what to enter,\n" " ask your network administrator.\n" "\n" " * Automatic IP: if your network uses BOOTP or DHCP protocol, select this " "option. If selected, no value is needed in\n" " \"IP address\". If you don't know or are not sure if you need to select " "this option, ask your network administrator." msgstr "" "��������:\n" "\n" " - IP �����: ���i �� ��� �� �������, ��������� �i�������� ���i�i��������.\n" "\n" "\n" " - ����� ����i: \"255.255.255.0\" �������� �'�������� ������i� �������.\n" "���i �� �� ��������, ��������� �i�������� ���i�i�������� �i ����������.\n" "\n" "\n" " - ���� IP: ���i � ����� ����� ��������������� ��������� bootp ����� " "dhcp,\n" "�������� ���� �������. � ����� ������� �������� \"IP �����\" ����������. \n" "���i �� �� ��������, ��������� �i�������� ���i�i�������� �i ����������.\n" #: ../../help.pm_.c:437 #, fuzzy msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, ask your network administrator." msgstr "" "���i � ����� ����� �������������� NIS, �������� \"������������ NIS\". ���i " "\n" "�� �������, ��������� ���i�i�������� ����i." #: ../../help.pm_.c:441 msgid "" "You may now enter your host name if needed. If you\n" "don't know or are not sure what to enter, leave blank." msgstr "" #: ../../help.pm_.c:445 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" "����� ����� �����i ��������� �������� ���� ����� (dialup). ���i ��\n" "�� �������, ��� �������� �i����,\n" "����������� �������� ��������� i��������� � ������ ���������� Internet (ISP)." #: ../../help.pm_.c:449 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you should use proxies, ask your network administrator or your ISP." msgstr "" "���i �� ��i������� ������������� proxy, i� ������ ����� �����i �����.\n" "���i �� �� �������, �� ��� i��� �������, �����i���� �� ���i�i��������\n" "����i �i �� Internet-����������." #: ../../help.pm_.c:453 #, fuzzy msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" "���i �������� � Internet ��������� ��������, ����� �������i�� " "����������i���\n" "�����. ��-������, �������� ��������, � ����� ������� ����� ������ i\n" "����� ������ �������� ������ ��� �������i.\n" "\n" "������� �����i��: ���i���� �������� i ������ �������� � ��i��� " "������������\n" "����� ���i��." #: ../../help.pm_.c:462 msgid "You can now select your timezone according to where you live." msgstr "" #: ../../help.pm_.c:465 #, fuzzy msgid "" "GNU/Linux manages time in GMT (Greenwich Manage\n" "Time) and translates it in local time according to the time zone you have\n" "selected.\n" "\n" "\n" "If you use Microsoft Windows on this computer, choose \"No\"." msgstr "" "����� �������� ������ ���� ������ � ������ ������ ����������.\n" "\n" "\n" "GNU/Linux ������ � ����� �� �����i�� (GMT) i ���������� ��� � ������� ���\n" "������ � ������� ���i ������� ������." #: ../../help.pm_.c:473 #, fuzzy msgid "" "You may now choose which services you want to start at boot time.\n" "\n" "\n" "When your mouse comes over an item, a small balloon help will popup which\n" "describes the role of the service.\n" "\n" "\n" "Be very careful in this step if you intend to use your machine as a server: " "you\n" "will probably want not to start any services that you don't need. Please\n" "remember that several services can be dangerous if they are enable on a " "server.\n" "In general, select only the services that you really need." msgstr "" "����� �� ������ ������� ������, ��i� ������ ���������� ��� �������� " "�i�����.\n" "���i ������ ���i ������i �� ����� ������, �� �'��i��� ����������� ��������,\n" "���� ��i���� ���� ����� ������.\n" "��������� ���� ��������� �� ����� �����, �����i�� ���i �� ��i������� ����\n" "������ ������������� �� ������: � ���i� ������� �� ������ �����i�� ����� \n" "�����, ��i� ��� ����������." #: ../../help.pm_.c:486 msgid "" "You can configure a local printer (connected to your computer) or remote\n" "printer (accessible via a Unix, Netware or Microsoft Windows network)." msgstr "" #: ../../help.pm_.c:490 msgid "" "If you wish to be able to print, please choose one printing system between\n" "CUPS and LPR.\n" "\n" "\n" "CUPS is a new, powerful and flexible printing system for Unix systems (CUPS\n" "means \"Common Unix Printing System\"). It is the default printing system " "in\n" "Linux-Mandrake.\n" "\n" "\n" "LPR is the old printing system used in previous Linux-Mandrake " "distributions.\n" "\n" "\n" "If you don't have printer, click on \"None\"." msgstr "" #: ../../help.pm_.c:505 msgid "" "GNU/Linux can deal with many types of printer. Each of these types requires\n" "a different setup.\n" "\n" "\n" "If your printer is physically connected to your computer, select \"Local\n" "printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine, select\n" "\"Remote printer\".\n" "\n" "\n" "If you want to access a printer located on a remote Microsoft Windows " "machine\n" "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"." msgstr "" #: ../../help.pm_.c:521 msgid "" "Please turn on your printer before continuing to let DrakX detect it.\n" "\n" "You have to enter some informations here.\n" "\n" "\n" " * Name of printer: the print spooler uses \"lp\" as default printer name. " "So, you must have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You " "just need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer a more meaningful name, you have " "to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" "\n" " * Description: this is optional but can be useful if several printers are " "connected to your computer or if you allow\n" " other computers to access to this printer.\n" "\n" "\n" " * Location: if you want to put some information on your\n" " printer location, put it here (you are free to write what\n" " you want, for example \"2nd floor\").\n" msgstr "" #: ../../help.pm_.c:542 msgid "" "You need to enter some informations here.\n" "\n" "\n" " * Name of queue: the print spooler uses \"lp\" as default printer name. " "So, you need have a printer named \"lp\".\n" " If you have only one printer, you can use several names for it. You just " "need to separate them by a pipe\n" " character (a \"|\"). So, if you prefer to have a more meaningful name, " "you have to put it first, eg: \"My printer|lp\".\n" " The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" " \n" " * Spool directory: it is in this directory that printing jobs are stored. " "Keep the default choice\n" " if you don't know what to use\n" "\n" "\n" " * Printer Connection: If your printer is physically connected to your " "computer, select \"Local printer\".\n" " If you want to access a printer located on a remote Unix machine, " "select \"Remote lpd printer\".\n" "\n" "\n" " If you want to access a printer located on a remote Microsoft Windows " "machine (or on Unix machine using SMB\n" " protocol), select \"SMB/Windows 95/98/NT\".\n" "\n" "\n" " If you want to acces a printer located on NetWare network, select " "\"NetWare\".\n" msgstr "" #: ../../help.pm_.c:567 msgid "" "Your printer has not been detected. Please enter the name of the device on\n" "which it is connected.\n" "\n" "\n" "For information, most printers are connected on the first parallel port. " "This\n" "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft " "Windows." msgstr "" #: ../../help.pm_.c:575 msgid "You must now select your printer in the above list." msgstr "" #: ../../help.pm_.c:578 msgid "" "Please select the right options according to your printer.\n" "Please see its documentation if you don't know what choose here.\n" "\n" "\n" "You will be able to test your configuration in next step and you will be " "able to modify it if it doesn't work as you want." msgstr "" #: ../../help.pm_.c:585 #, fuzzy msgid "" "You can now enter the root password for your Linux-Mandrake system.\n" "The password must be entered twice to verify that both password entries are " "identical.\n" "\n" "\n" "Root is the system's administrator and is the only user allowed to modify " "the\n" "system configuration. Therefore, choose this password carefully. \n" "Unauthorized use of the root account can be extemely dangerous to the " "integrity\n" "of the system, its data and other system connected to it.\n" "\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. It should never be written down.\n" "\n" "\n" "Do not make the password too long or complicated, though: you must be able " "to\n" "remember it without too much effort." msgstr "" "�����i�� ������ ���������������i�� (root) ����� �i����� Linux-Mandrake.\n" "������ ��������� �����i ������, ��� �����i���, ��� �� �� �����i�i��.\n" "\n" "\n" "Root - ���� ���i�i������� �i�����, �����i ��� ��������� ������� " "����i�������\n" "�i�����. D����i �����i�� ���i����� ������! \n" "����������� ������������ ������ ������ ���� ���� ��������\n" "������ ��� ���������i �i�����, ��� ������������ � �� ��������\n" "i ��� i���� ��������� � �� �i����. ������ ���i��� ���� �������� � �����i\n" "�����i���-�������� �i����� i ���� ������ �� ���� 8 �i���. �i���i �� " "���i������\n" "���!. � ��� �� ��� �� ���i�� ������ ������� ��������� ����� ���������:\n" "�� ���i��� �����i����� ��� �����i���� ����������." #: ../../help.pm_.c:603 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" "��� ������i�� ������� �i�����, ��������� ������� \"���������� ������� " "����\"\n" "i \"���������� �����i MD5\"." #: ../../help.pm_.c:607 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" "���i � ����� ����� �������������� NIS, �������� \"������������ NIS\". ���i " "\n" "�� �������, ��������� ���i�i�������� ����i." #: ../../help.pm_.c:611 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" "����� �� ������ �������� ���i� ����� �������i \"���������\" ��i����� " "���i��\n" "����������i��. ��� ������� ����������i�� ������� �������� �� ������ �i " "�������i\n" "��i����� ���i��. ��� ������� ��i������ ���i�� ���������� ������� ��������i\n" "(����i���� ����������, ��������i �������,...) i ������ \"����i �������\",\n" "� ��i� ���������� ����� ��������i.\n" "\n" "\n" "��-������, �������� ������ ��� ����! ����� ���i �� ������� ���i���\n" "����������i��� ����� ������, �� ������������� �������i�� � ������i\n" "���������������i�� ��� ��������� �����: ���� ������� ���i��� �������\n" "������i. ������� ��i����� �i����� ��������� �������� �����.\n" "\n" "\n" "���� �������i�� � �i����� ��������� � ������i ���������� ����������i��,\n" "����� �� ����� i ��������, � �������i�� � ������i root ��������� �����i\n" "� �����i ���i�i����������� i ������������ �i�����." #: ../../help.pm_.c:630 msgid "" "Creating a boot disk is strongly recommended. If you can't\n" "boot your computer, it's the only way to rescue your system without\n" "reinstalling it." msgstr "" #: ../../help.pm_.c:635 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to GNU/Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" "��������� ���������, ��� �� ������� �������i�� i���������, ���� ���������\n" "��� �������i Linux.\n" "\n" "\n" "���i �� �� ��������� ��������� ��������, ��� �� ���i��, \n" "�������� \"����� ������ �� ����� (MBR)\"." #: ../../help.pm_.c:643 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" " (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" "���i �� �� ������� ��������, ��� ��������� ������� �'�������� \"/dev/hda\"\n" "(�������� ������� IDE ����) �i \"/dev/sda\" (����� SCSI ����)." #: ../../help.pm_.c:647 msgid "" "LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "LILO (�� LInux LOader) i Grub - ���� ���������i. ��� ������ ������i�� " "������\n" "GNU/Linux �i ����� i���� ����������� �i�����, ����������� �� ���������.\n" "��������, ����� i���� ����������� �i����� �������� ����������� i\n" "����븢������. ���i ���� �� ����������, �� �� ������ ������ ���� ���i�\n" "����������. ������� ��������, ��� �� �����i ��������� ���������.\n" "\n" "\n" "������� �� ������ �������� i �� �������� i���� ����������� �i�����.\n" "� ���i� ������� �������� ����i�� ���������� ���i��. ��� � ���� ��� \n" "�������� ����� ����������� �������, ��� ������i���!" #: ../../help.pm_.c:659 #, fuzzy msgid "" "LILO and grub main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" "\n" " * normal: select normal 80x25 text mode.\n" "\n" " * <number>: use the corresponding text mode." msgstr "" "������� ��������� LILO i Grub:\n" " - ������� �������i: ������� i�� ������� (����. �������\n" "��������� �����), ���� ������� ���������� ������. ���i �� ������� " "������i�i,\n" "�� ���i����� \"/dev/hda\" (����� \"/dev/sda\", ���i � ��� SCSI-����).\n" "\n" "\n" " - �������� �� �������� ����� ��������� �������: ����� ��� � ��������\n" "�������, �� ������� ����� ��������� ����� ����� ��������� ����������� " "�������.\n" "���� �������� ������� ��� �i����, ��i� ������ ����������� � ��������� �����\n" "������ ����� ��������� ����i�����. ��������� �� �����, ���i \"��������\" \n" "�� ����� ��������� �i ���������� �� ����.\n" "\n" "\n" " - �i��������: ���i������ �������� ����� VGA, ��i ����� ����������\n" "��� ��������. ������� ��������� ��������: \n" " * normal: ������� �������� ����� 80x25.\n" " * <number>: ������� ��������� �������� �����." #: ../../help.pm_.c:680 msgid "" "SILO is a bootloader for SPARC: it is able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" "SILO - ���� ��������� ��� SPARC. �� ���� ������i�� ������\n" "GNU/Linux �i ����� i���� ����������� �i�����, ����������� �� ���������.\n" "��������, ����� i���� ����������� �i����� �������� ����������� i\n" "����븢������. ���i ���� �� ����������, �� �� ������ ������ ���� ���i�\n" "����������. ������� ��������, ��� �� �����i ��������� ���������.\n" "\n" "\n" "������� �� ������ �������� i �� �������� i���� ����������� �i�����.\n" "� ���i� ������� �������� ����i�� ���������� ���i��. ��� � ���� ��� \n" "�������� ����� i����������� ����, ��� ������i���." #: ../../help.pm_.c:692 msgid "" "SILO main options are:\n" " - Bootloader installation: Indicate where you want to place the\n" "information required to boot to GNU/Linux. Unless you know exactly\n" "what you are doing, choose \"First sector of drive (MBR)\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero." msgstr "" "������� ��������� SILO:\n" " - ����븢�� ����������: �������� �����, ���� �� ������� �����i��\n" "i���������, ��������� ��� �������i GNU/Linux. ���i �� ��������, ���\n" "���i�� ����i����, ���i����� \"����� ������ ����� (MBR)\".\n" "\n" "\n" " - �������� �� �������� ����� ��������� �������: ����� ��� � ��������\n" "�������, �� ������� ����� ��������� ����� ����� ��������� ����������� " "�������.\n" "���� �������� ������� ��� �i����, ��i� ������ ����������� � ��������� �����\n" "������ ������ ��������� ����i�����. ��������� �� �����, ���i \"��������\"\n" "�� ����� ��������� �i ���������� �� ����." #: ../../help.pm_.c:705 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" "����� ������� ������i�� X Window System, ���� �'��������\n" "������� Linux GUI (����i��� I�������� ����������i��). ����� ������\n" "�������� ������i�� �i�������� i ���i���. ������� ������ ����� �����\n" "�������������, ���� ���� ����� ���� ���������� � ��������\n" "���i�� ��������i i ������������ ������� ��������� :)\n" "\n" "���i ����i��������� ����������, ����� ��������� X (���i �� ��\n" "������i�� DrakX �� ���i�� ������), ��� �� �����i ���������, �i ������\n" "�� � ����������i. ���i ��, �� ����� ������� �������� i ������� i�\n" "�����i ��� ��������." #: ../../help.pm_.c:718 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "" "���i ����� �� ��� � ���������� X, ����������� ����� ��������� ��� \n" "��������� ��������i X Window System." #: ../../help.pm_.c:722 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" "���i �� ������� �������� ����i����� ������� (login), �������� \"���\". I���� " "- \n" "\"��\"." #: ../../help.pm_.c:726 #, fuzzy msgid "" "You can now select some miscellaneous options for your system.\n" "\n" "* Use hard drive optimizations: this option can improve hard disk " "performance but is only for advanced users. Some buggy\n" " chipsets can ruin your data, so beware. Note that the kernel has a builtin " "blacklist of drives and chipsets, but if\n" " you want to avoid bad surprises, leave this option unset.\n" "\n" "\n" "* Choose security level: you can choose a security level for your system. " "Please refer to the manual for complete\n" " information. Basically, if you don't know what to choose, keep the default " "option.\n" "\n" "\n" "* Precise RAM if needed: unfortunately, there is no standard method to ask " "the BIOS about the amount of RAM present in\n" " your computer. As consequence, Linux may fail to detect your amount of RAM " "correctly. If this is the case, you can\n" " specify the correct amount or RAM here. Please note that a difference of 2 " "or 4 MB between detected memory and memory\n" " present in your system is normal.\n" "\n" "\n" "* Removable media automounting: if you would prefer not to manually mount " "removable media (CD-Rom, floppy, Zip, etc.) by\n" " typing \"mount\" and \"umount\", select this option.\n" "\n" "\n" "* Clean \"/tmp\" at each boot: if you want delete all files and directories " "stored in \"/tmp\" when you boot your system,\n" " select this option.\n" "\n" "\n" "* Enable num lock at startup: if you want NumLock key enabled after booting, " "select this option. Please note that you\n" " should not enable this option on laptops and that NumLock may or may not " "work under X." msgstr "" "����� ������� ������ ��������� ���������� ��������� �i�����.\n" "\n" " - ������������� �����i����� ��������� �����: ���� �������� �������� " "������\n" "�� ��������� �����, ��� ���� �����i ��� �������� ����������i��,\n" "��� ����������� ���������i ������� ��������� ���������i ���������.\n" " - ������� �������� ������i: �� ������ ������� �������� ������i ��� ���� \n" "�i�����.\n" " �� ���������� i���������� ����������� �� ��������i��.\n" "\n" "\n" " - �������� ����� RAM : � ��������� �������� Linux �� ���� ��������\n" "����i�� ��� ����������� ������, ���� ������ � �i�����. � ����� �������\n" "�������� �������� �����. �����: ����������� � 2-4�� �����������.\n" "\n" "\n" " - ������������ ����i������� ������� ����������i��: ���i �� ������� �� \n" "����i������ ���������� ������� ����������i�i, (CD-ROM, Floppy, Zip) " "��������i \"mount\" �i \"umount\", �������� ���� ��������. \n" "\n" "\n" " - �������� Num Lock ��� �������: ���i �� �������, ��� Number Lock ��� " "��������\n" "����� �������i, �������� ���� �������� (�����: Num Lock ���� ���� i �� " "��������\n" "��� X)." #: ../../help.pm_.c:755 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" "�i����� ��i������ ����������i���.\n" "\n" "����� �����������i, ���� ����� �i����� Linux Mandrake ������i��� " "����������.\n" "���i �� ������� ����������i�� ��� i���� ����������� �i�����, ������� \n" "���������� i��������i." #: ../../install2.pm_.c:40 msgid "Choose your language" msgstr "����� ����" #: ../../install2.pm_.c:41 msgid "Select installation class" msgstr "���� �������i" #: ../../install2.pm_.c:42 msgid "Hard drive detection" msgstr "���������� ��������� �����" #: ../../install2.pm_.c:43 msgid "Configure mouse" msgstr "��������� ���i" #: ../../install2.pm_.c:44 msgid "Choose your keyboard" msgstr "����� ����i�����" #: ../../install2.pm_.c:45 ../../install_steps_interactive.pm_.c:497 msgid "Miscellaneous" msgstr "������" #: ../../install2.pm_.c:46 msgid "Setup filesystems" msgstr "�����. �������� �i�����" #: ../../install2.pm_.c:47 msgid "Format partitions" msgstr "������i������� ��������" #: ../../install2.pm_.c:48 msgid "Choose packages to install" msgstr "����� ������" #: ../../install2.pm_.c:49 msgid "Install system" msgstr "�������� �i�����" #: ../../install2.pm_.c:50 msgid "Configure networking" msgstr "��������� ����i" #: ../../install2.pm_.c:52 msgid "Configure timezone" msgstr "��������� �������� �����" #: ../../install2.pm_.c:53 msgid "Configure services" msgstr "��������� ������" #: ../../install2.pm_.c:54 msgid "Configure printer" msgstr "��������� ��������" #: ../../install2.pm_.c:55 ../../install_steps_interactive.pm_.c:758 #: ../../install_steps_interactive.pm_.c:759 msgid "Set root password" msgstr "������ ��� root" #: ../../install2.pm_.c:56 msgid "Add a user" msgstr "������ ����������i��" #: ../../install2.pm_.c:58 msgid "Create a bootdisk" msgstr "�������� ����. ����" #: ../../install2.pm_.c:60 msgid "Install bootloader" msgstr "����븢�� ����������" #: ../../install2.pm_.c:61 msgid "Configure X" msgstr "��������� X Window" #: ../../install2.pm_.c:63 msgid "Auto install floppy" msgstr "���� ����븢�� ����i" #: ../../install2.pm_.c:65 msgid "Exit install" msgstr "���������� ����븢�i" #: ../../install_any.pm_.c:575 msgid "Error reading file $f" msgstr "������� ������� ����� $f" #: ../../install_gtk.pm_.c:426 msgid "Please test the mouse" msgstr "��� �����, ������ ������� ���� �����." #: ../../install_gtk.pm_.c:427 #, fuzzy msgid "To activate the mouse," msgstr "��� �����, ������ ������� ���� �����." #: ../../install_gtk.pm_.c:428 msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "��������� ������������ ��������� ����������� �������� ��� �����.\n" "�������� ���������� ��� �� ����� �������� ���: %s" #: ../../install_interactive.pm_.c:41 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "�� ���i��� ���� �������� �������.\n" "��� ������ �������� ������� (����� �������� ��� i������).\n" "����� �������� ``������ ����i�������'' i �������i�� �� � `/'" #: ../../install_interactive.pm_.c:46 ../../install_steps_graphical.pm_.c:259 msgid "You must have a swap partition" msgstr "�� ���i��� ���� ������� swap" #: ../../install_interactive.pm_.c:47 ../../install_steps_graphical.pm_.c:261 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" "���� �������� swap.\n" "\n" "�� ���� ����������?" #: ../../install_interactive.pm_.c:68 msgid "Use free space" msgstr "������������� ��������� ��������" #: ../../install_interactive.pm_.c:70 msgid "Not enough free space to allocate new partitions" msgstr "�� ����� �������� ��� ��������� ����� ��������" #: ../../install_interactive.pm_.c:78 msgid "Use existing partition" msgstr "������������� i������ �������" #: ../../install_interactive.pm_.c:80 msgid "There is no existing partition to use" msgstr "���� i������� ��������, ��i� ����� �����������" #: ../../install_interactive.pm_.c:87 msgid "Use the Windows partition for loopback" msgstr "������������� ������� Windows ��� �i��������� �������� �i�����" #: ../../install_interactive.pm_.c:90 #, fuzzy msgid "Which partition do you want to use for Linux4Win?" msgstr "��i ������� ����� ������� �������������, ��� �����i�� linux4Win?" #: ../../install_interactive.pm_.c:92 msgid "Choose the sizes" msgstr "����� ������" #: ../../install_interactive.pm_.c:93 msgid "Root partition size in MB: " msgstr "�������� ������� � M�: " #: ../../install_interactive.pm_.c:94 msgid "Swap partition size in MB: " msgstr "����� swap �������� � M�:" #: ../../install_interactive.pm_.c:102 msgid "Use the free space on the Windows partition" msgstr "������������� ��������� �������� �� �������� Windows" #: ../../install_interactive.pm_.c:105 msgid "Which partition do you want to resize?" msgstr "������ ����� �������� �� ������� ����i��?" #: ../../install_interactive.pm_.c:107 msgid "Computing Windows filesystem bounds" msgstr "���i����� ���� �������� �i����� Windows" #: ../../install_interactive.pm_.c:109 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "� �������� ����� ������ �������� FAT �� ����������\n" "���������� ��� �������, �������: %s" #: ../../install_interactive.pm_.c:112 msgid "Your Windows partition is too fragmented, please run ``defrag'' first" msgstr "" "��� ������� � Windows ������� �������������. \n" "����������� �������� ������i�� �������� ``defrag''" #: ../../install_interactive.pm_.c:113 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this operation is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "�����!\n" "\n" "DrakX ����� ���i��� ����i�� ����� ������ �������� Windows.\n" "������� �����i��: ����� �������� ����������. ���i �� ���� �� ����i�i \n" "���������� ���i� ��������, �� �������� ���i���� �������� " "�����������,��������� scandisk i defrag �� ����� �������, ����i�� ���������� " "���i�\n" "�������� i �����i ����� ��� ����i���� �� �������� �����������.\n" "���i �����������i��, ���i��i�� Ok." #: ../../install_interactive.pm_.c:122 msgid "Which size do you want to keep for windows on" msgstr "���� �������� �������� ��� Windows?" #: ../../install_interactive.pm_.c:123 #, c-format msgid "partition %s" msgstr "������� %s" #: ../../install_interactive.pm_.c:129 #, c-format msgid "FAT resizing failed: %s" msgstr "������������ ������ �� ���������� ��� �������� FAT %s" #: ../../install_interactive.pm_.c:144 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" "�� ��������� �������� FAT ��� �������� ������ ����� ������������\n" "� �����i �i��������� �������� �i����� (�i ������������ �������� �� �����)" #: ../../install_interactive.pm_.c:150 msgid "Erase entire disk" msgstr "�����i �������� �� ��i� �����" #: ../../install_interactive.pm_.c:150 msgid "Remove Windows(TM)" msgstr "�����i�� Windows(TM)" #: ../../install_interactive.pm_.c:153 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "�� ��i � �������� ������i� ����� �� ������� ���������� Linux?" #: ../../install_interactive.pm_.c:156 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "��� i������� �������� �� ����� %s i �������� �� i� ������ ��������" #: ../../install_interactive.pm_.c:164 msgid "Expert mode" msgstr "����� ��������" #: ../../install_interactive.pm_.c:164 msgid "Use diskdrake" msgstr "������������� DiskDrake" #: ../../install_interactive.pm_.c:168 msgid "Use fdisk" msgstr "������������� fdisk" #: ../../install_interactive.pm_.c:171 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "�� ������ ����� ����i�� ��� ���� %s\n" "�� ���������i �� ��������� �������� �������i, ������������ `w'" #: ../../install_interactive.pm_.c:195 #, fuzzy msgid "You don't have enough free space on your Windows partition" msgstr "������������� ��������� �������� �� �������� Windows" #: ../../install_interactive.pm_.c:210 #, fuzzy msgid "I can't find any room for installing" msgstr "������ ������� ���������" #: ../../install_interactive.pm_.c:213 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "������ ���������i �������� DrakX ������ ��������� ��������:" #: ../../install_interactive.pm_.c:218 #, c-format msgid "Partitioning failed: %s" msgstr "���������� ������� �� �������: %s" #: ../../install_interactive.pm_.c:233 msgid "Bringing up the network" msgstr "��������� �� ����i" #: ../../install_interactive.pm_.c:238 msgid "Bringing down the network" msgstr "��������� �� ����i" #: ../../install_steps.pm_.c:74 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "���i��� �������, ���� �� ������������ �������� ����������,\n" "���� ����������� �� ���� ����� i ������." #: ../../install_steps.pm_.c:196 #, c-format msgid "Duplicate mount point %s" msgstr "����i������� �����i ����i������� %s" #: ../../install_steps.pm_.c:375 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" msgstr "" "��������� ������ ������ �� ���i ���������� ��������.\n" "����i ��� cdrom ���� �i ��� cdrom ����� �������.\n" "�������� cdrom �� ����븢������ ���������, ��������������\"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" #: ../../install_steps.pm_.c:450 #, c-format msgid "Welcome to %s" msgstr "�������� ��������� � %s" #: ../../install_steps.pm_.c:662 msgid "No floppy drive available" msgstr "�������� ����������" #: ../../install_steps_auto_install.pm_.c:43 #: ../../install_steps_stdio.pm_.c:23 #, c-format msgid "Entering step `%s'\n" msgstr "������� �� ���� `%s'\n" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "�������� �������� ����� ����븢�i" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "������� �����: " #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:353 #: ../../standalone/rpmdrake_.c:136 #, c-format msgid "Version: %s\n" msgstr "����i�: %s\n" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:354 #: ../../standalone/rpmdrake_.c:137 #, c-format msgid "Size: %d KB\n" msgstr "�����: %d K�\n" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:260 msgid "Choose the packages you want to install" msgstr "����� ������ ��� ����븢�i" #: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:263 msgid "Info" msgstr "I���������" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:268 #: ../../install_steps_interactive.pm_.c:216 ../../standalone/rpmdrake_.c:161 msgid "Install" msgstr "����븢��" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:466 #: ../../install_steps_interactive.pm_.c:594 msgid "Installing" msgstr "����븢����" #: ../../install_steps_graphical.pm_.c:499 ../../install_steps_gtk.pm_.c:472 msgid "Please wait, " msgstr "���������, ���i �����, " #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:474 msgid "Time remaining " msgstr "��������� ���� " #: ../../install_steps_graphical.pm_.c:502 ../../install_steps_gtk.pm_.c:475 msgid "Total time " msgstr "������� ��� " #: ../../install_steps_graphical.pm_.c:507 ../../install_steps_gtk.pm_.c:484 #: ../../install_steps_interactive.pm_.c:594 msgid "Preparing installation" msgstr "���������� ����븢�i" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:500 #, c-format msgid "Installing package %s" msgstr "����븢�� ������ %s" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569 #: ../../install_steps_gtk.pm_.c:573 msgid "Go on anyway?" msgstr "�� ���� ����������?" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:569 msgid "There was an error ordering packages:" msgstr "���������� ������� ������������� ������:" #: ../../install_steps_graphical.pm_.c:577 #: ../../install_steps_interactive.pm_.c:999 msgid "Use existing configuration for X11?" msgstr "����������� i������� ��������� ��� X11?" #: ../../install_steps_gtk.pm_.c:136 msgid "" "Your system is low on resource. You may have some problem installing\n" "Linux-Mandrake. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "� ����� �i����� ������ ������� �������, ���� ������� ��������\n" "��� ����������i Linux-Mandrake. � ����� ������� ����������� ���������\n" "�������� �����������. ��� ������ ���i��i�� `F1' � ��� �������i, � �����\n" "�������� `text' i ���i��i�� <ENTER>." #: ../../install_steps_gtk.pm_.c:150 msgid "Please, choose one of the following classes of installation:" msgstr "���i �����, �������� ���i� � ����� ����븢�i:" #: ../../install_steps_gtk.pm_.c:215 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "������� ����� ��� ������� ���� �����i��� ���� %d ��.\n" #: ../../install_steps_gtk.pm_.c:217 msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" "���i �� ������� ���������� ����� ������ ������,\n" "�������� ������� ������, ��i �� ������� ����������.\n" "\n" "��� �i��i� �������� ������ ���������� �����i �������� ������ ������,\n" "� ��� 100% ������ ���������� ��� ������� ������." #: ../../install_steps_gtk.pm_.c:222 msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" "�� ����� ����� ���� ����� �����i ��� %d%% ����� ������.\n" "\n" "���i �� ������� ���������� ����� ������, ��\n" "�������� ������� ������ ��� ����븢�i.\n" "��� ����� �������� ������ ���������� �������� ������ ������;\n" "��� �������� %d%% ����� ���������� ������i ������ �����i �������." #: ../../install_steps_gtk.pm_.c:228 msgid "You will be able to choose them more specifically in the next step." msgstr "����� �������� ����� ����� ����� ����i�� �� ��������� �����." #: ../../install_steps_gtk.pm_.c:230 msgid "Percentage of packages to install" msgstr "������� ������ ��� ����븢�i" #: ../../install_steps_gtk.pm_.c:272 msgid "Automatic dependencies" msgstr "�������� �����������" #: ../../install_steps_gtk.pm_.c:332 ../../standalone/rpmdrake_.c:101 msgid "Expand Tree" msgstr "�������� �����" #: ../../install_steps_gtk.pm_.c:333 ../../standalone/rpmdrake_.c:102 msgid "Collapse Tree" msgstr "�������� �����" #: ../../install_steps_gtk.pm_.c:334 msgid "Toggle between flat and group sorted" msgstr "������������ ���i� �������������� �� ����� i �������" #: ../../install_steps_gtk.pm_.c:351 msgid "Bad package" msgstr "������ �����" #: ../../install_steps_gtk.pm_.c:352 #, c-format msgid "Name: %s\n" msgstr "I��: %s\n" #: ../../install_steps_gtk.pm_.c:355 #, c-format msgid "Importance: %s\n" msgstr "���������: %s\n" #: ../../install_steps_gtk.pm_.c:363 #, c-format msgid "Total size: %d / %d MB" msgstr "������� �����: %d / %d M�" #: ../../install_steps_gtk.pm_.c:382 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "�� �� ������ ������� ���� �����, ��� �� �� ����� ����� ��� ��� ������i" #: ../../install_steps_gtk.pm_.c:386 msgid "The following packages are going to be installed" msgstr "��������� ������ ������ ������ �� �i�����" #: ../../install_steps_gtk.pm_.c:387 msgid "The following packages are going to be removed" msgstr "��������� ������ ������ ��������" #: ../../install_steps_gtk.pm_.c:397 msgid "You can't select/unselect this package" msgstr "�� �� ������ ������i��/�����i�� ���������� ������ ������" #: ../../install_steps_gtk.pm_.c:416 msgid "This is a mandatory package, it can't be unselected" msgstr "���� ���������� �����, ��� ���������� ������ �����i��" #: ../../install_steps_gtk.pm_.c:418 msgid "You can't unselect this package. It is already installed" msgstr "�� �� ������ �����i�� ���������� ������ ������. �� ��� ����������" #: ../../install_steps_gtk.pm_.c:422 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" "���� ����� ���i��� ���� ��������\n" "�� ��������, ��� ������ �����i�� ����������?" #: ../../install_steps_gtk.pm_.c:425 msgid "You can't unselect this package. It must be upgraded" msgstr "�� �� ������ �����i�� ���������� ������ ������. ��� �������� �����i��" #: ../../install_steps_gtk.pm_.c:469 msgid "Estimating" msgstr "��������" #: ../../install_steps_gtk.pm_.c:481 ../../interactive.pm_.c:86 #: ../../interactive.pm_.c:249 ../../interactive_newt.pm_.c:51 #: ../../interactive_newt.pm_.c:99 ../../interactive_stdio.pm_.c:27 #: ../../my_gtk.pm_.c:246 ../../my_gtk.pm_.c:486 msgid "Cancel" msgstr "������" #: ../../install_steps_gtk.pm_.c:495 #, c-format msgid "%d packages" msgstr "%d ������" #: ../../install_steps_gtk.pm_.c:531 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147 msgid "Accept" msgstr "�������" #: ../../install_steps_gtk.pm_.c:559 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "����i�� ��� Cd-Rom!\n" "\n" "���i �����, ������ Cd-Rom, �������� \"%s\", � ��� �������� i ���i��i�� O� " "�����.\n" "���i �� �� ����� ���, ���i��i�� �����i��, ��� �����i�� ����븢�� � ������ Cd." #: ../../install_steps_gtk.pm_.c:559 ../../install_steps_interactive.pm_.c:147 msgid "Refuse" msgstr "��������" #: ../../install_steps_gtk.pm_.c:573 msgid "There was an error installing packages:" msgstr "���������� ������� ������������� ������:" #: ../../install_steps_interactive.pm_.c:38 msgid "An error occurred" msgstr "�������� �������" #: ../../install_steps_interactive.pm_.c:54 msgid "Please, choose a language to use." msgstr "���i �����, �������� ���� ��� ����������." #: ../../install_steps_interactive.pm_.c:70 msgid "License agreement" msgstr "" #: ../../install_steps_interactive.pm_.c:71 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the " "Linux-Mandrake distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Linux-Mandrake distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read carefully this document. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Linux-Mandrake sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Linux-Mandrake\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../install_steps_interactive.pm_.c:154 #: ../../standalone/keyboarddrake_.c:21 msgid "Keyboard" msgstr "����i�����" #: ../../install_steps_interactive.pm_.c:155 #: ../../standalone/keyboarddrake_.c:22 msgid "Please, choose your keyboard layout." msgstr "���i �����, �������� ��� ����i�����." #: ../../install_steps_interactive.pm_.c:166 msgid "You can choose other languages that will be available after install" msgstr "�� ������ ������� ����i� ����, ��i� ������ �������� ����� ����븢�i" #: ../../install_steps_interactive.pm_.c:173 #: ../../install_steps_interactive.pm_.c:520 msgid "All" msgstr "" #: ../../install_steps_interactive.pm_.c:181 #: ../../install_steps_interactive.pm_.c:227 msgid "Install Class" msgstr "���� ����븢�i" #: ../../install_steps_interactive.pm_.c:181 msgid "Which installation class do you want?" msgstr "��i ���� ����븢�i �� �������?" #: ../../install_steps_interactive.pm_.c:183 #, fuzzy msgid "Install/Update" msgstr "����븢��/���������" #: ../../install_steps_interactive.pm_.c:183 #, fuzzy msgid "Is this an install or an update?" msgstr "���� ����븢�� �i �����������?" #: ../../install_steps_interactive.pm_.c:192 msgid "Recommended" msgstr "�������������" #: ../../install_steps_interactive.pm_.c:195 #: ../../install_steps_interactive.pm_.c:211 msgid "Customized" msgstr "�� ������" #: ../../install_steps_interactive.pm_.c:196 #: ../../install_steps_interactive.pm_.c:211 msgid "Expert" msgstr "�������" #: ../../install_steps_interactive.pm_.c:206 msgid "" "Are you sure you are an expert? \n" "You will be allowed to make powerful but dangerous things here.\n" "\n" "You will be asked questions such as: ``Use shadow file for passwords?'',\n" "are you ready to answer that kind of questions?" msgstr "" "�� ��������, ��� ������� ���������� ������ ����������� �� �������?\n" "� ����� ������� �� ������� ���� ������ �������� ��� �������� �����������,\n" "��� ���i�i ������i ������ ���� ���������.\n" "\n" "��� ������ ���������, ���������, ���i� ������i: ``�i ������������� ������\n" "���� �������?'' �i ������������ �� �� ������ �� ����� ������i?" #: ../../install_steps_interactive.pm_.c:216 #, fuzzy msgid "Update" msgstr "���������" #: ../../install_steps_interactive.pm_.c:222 msgid "Workstation" msgstr "��������" #: ../../install_steps_interactive.pm_.c:223 msgid "Development" msgstr "��� ���������i" #: ../../install_steps_interactive.pm_.c:224 msgid "Server" msgstr "������" #: ../../install_steps_interactive.pm_.c:228 msgid "What is your system used for?" msgstr "����� ���� �� ������� ������������� ������?" #: ../../install_steps_interactive.pm_.c:244 ../../standalone/mousedrake_.c:24 msgid "Please, choose the type of your mouse." msgstr "���i �����, �������� ��� ����� ���i." #: ../../install_steps_interactive.pm_.c:251 ../../standalone/mousedrake_.c:40 msgid "Mouse Port" msgstr "���� ���i" #: ../../install_steps_interactive.pm_.c:252 msgid "Please choose on which serial port your mouse is connected to." msgstr "���i �����, �������� ��������� ����, �� ����� �������� ���� ���." #: ../../install_steps_interactive.pm_.c:271 msgid "Configuring PCMCIA cards..." msgstr "��������� ���� PCMCIA ..." #: ../../install_steps_interactive.pm_.c:271 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:275 msgid "Configuring IDE" msgstr "��������� IDE" #: ../../install_steps_interactive.pm_.c:275 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:288 msgid "no available partitions" msgstr "���� ��������� ��������" #: ../../install_steps_interactive.pm_.c:291 msgid "Scanning partitions to find mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:299 msgid "Choose the mount points" msgstr "�������� ������ ����i�������" #: ../../install_steps_interactive.pm_.c:316 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "����i�� �������� �� ��������, ��� ������� �������� ��� ���� :(\n" "��������� i��i ����� i ���� ���������� ������� �������� (��� ���������\n" "������ ��������!). I���� ������� �� ������i�� DrakX ����i�� ����i�� " "��������.\n" "(������� � %s)\n" "\n" "�i ������� �����i�� ��� ��������?\n" #: ../../install_steps_interactive.pm_.c:329 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "DiskDrake �� ���� ����i���� ��������� ����i�� �������.\n" "����������� �����i �� ���� ����� i ������!" #: ../../install_steps_interactive.pm_.c:337 msgid "Root Partition" msgstr "�������� �������" #: ../../install_steps_interactive.pm_.c:338 msgid "What is the root partition (/) of your system?" msgstr "��i ������ �������� (/) ��� ����� �i�����?" #: ../../install_steps_interactive.pm_.c:352 msgid "You need to reboot for the partition table modifications to take place" msgstr "��� �����i����� ����i�� �������� ������i����, �������� ������������." #: ../../install_steps_interactive.pm_.c:376 msgid "Choose the partitions you want to format" msgstr "����� �������� ��� ������i�������" #: ../../install_steps_interactive.pm_.c:386 msgid "Check bad blocks?" msgstr "��������� �� ��������� ������� �����?" #: ../../install_steps_interactive.pm_.c:397 msgid "Formatting partitions" msgstr "������i������� ��������" #: ../../install_steps_interactive.pm_.c:401 #, c-format msgid "Creating and formatting file %s" msgstr "��������� i ������i������� ����� %s" #: ../../install_steps_interactive.pm_.c:404 msgid "Not enough swap to fulfill installation, please add some" msgstr "�� ����� ����� � ������ �������i (swap) ��� ����븢�i, �����i��� ���." #: ../../install_steps_interactive.pm_.c:410 msgid "Looking for available packages" msgstr "������� ��������� ������" #: ../../install_steps_interactive.pm_.c:416 msgid "Finding packages to upgrade" msgstr "����� ������ ��� ���������" #: ../../install_steps_interactive.pm_.c:433 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" "���� �i����� �� ��� ��������� ����� ��� ����븢�i �i ��������� (%d > %d)" #: ../../install_steps_interactive.pm_.c:449 #, c-format msgid "Complete (%dMB)" msgstr "���� (%dM�)" #: ../../install_steps_interactive.pm_.c:449 #, c-format msgid "Minimum (%dMB)" msgstr "�i�i������ (%dM�)" #: ../../install_steps_interactive.pm_.c:449 #, c-format msgid "Recommended (%dMB)" msgstr "������������� (%d��)" #: ../../install_steps_interactive.pm_.c:455 msgid "Custom" msgstr "�� ������" #: ../../install_steps_interactive.pm_.c:462 msgid "Select the size you want to install" msgstr "�������� �������� ����� ����븢�i" #: ../../install_steps_interactive.pm_.c:508 msgid "Package Group Selection" msgstr "����� ����� ������" #: ../../install_steps_interactive.pm_.c:521 msgid "Individual package selection" msgstr "����i��� ����� ������" #: ../../install_steps_interactive.pm_.c:570 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "���i �� ����� ��� CD ����i �� ��i�� �i���, ���i��i�� ��.\n" "���i �� �� ����� �i ������ � ����� CD �����, ���i��i�� �����i��.\n" "���i ��������� � CD ����� �� �����, �����i�� i� ���������� i ���i��i�� ��." #: ../../install_steps_interactive.pm_.c:575 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom �������� \"%s\"" #: ../../install_steps_interactive.pm_.c:603 msgid "" "Installing package %s\n" "%d%%" msgstr "" "����븢�� ������ %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:612 msgid "Post-install configuration" msgstr "��������� ����� �������i" #: ../../install_steps_interactive.pm_.c:637 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "����� �� ����� ���������� ������i�� �������� ��� ����������.\n" "\n" "�����:\n" "\n" "�-�� �������� ������������ �� �������� ������ ���� i ������ ��������\n" "� ������ �������������, �������� i/����� ����������i� ����� ������� " "���i���\n" "���������i��� � ���, ��� ������ ���/i� ����� ���������� ���������, " "��������\n" "i/����� ������������� ����� ��������.\n" "\n" "������ ����, �������� i/����� ����������i� ���i��� ���� ���������, ��� �� " "���������\n" "������ ���� ���i��. ���i �������� i/����� ����������i� ������� �����\n" "������, ��i� ������ ���� ��������� ������i� ���, ��/��� ���� ������� " "����������.\n" "\n" "�i � ��i� ���� �i Mandrakesoft, �i �� �������� i ���������i �� ����������\n" "�� �����������, �������� ����� ���������� ����� (��� �������, ��� \n" "�� ������������ ���������� ��������, ��������� �i�����, ������� ����������� " "\n" "�������� i i����i �������i, � ������� ��������i ��������i i �������i, ��i� \n" "�������� ������i�� �� ��������� ����), ��i� ��������� � �����������, \n" "���������, ����� ������ �������i � ����i �������, �� ��i� �������� �����\n" "����������i� �������i ������ ����� ����i����� ������ ����������.\n" "\n" "����� ���������� � ������ ����� �������� ������������ ������i, �� " "�����������\n" "�������, ��i� ���������� �������������� �������� ������������� � �����\n" "�������������� �����. ����� �������� ���������� ����������� �������� �����\n" "���������i�� ������������, ��������, ����� ���������� �� ����i�������.\n" "���i� �����, ������ ������i ������ ������i������ ��� �����i i����i " "��������i\n" "�������i.\n" "\n" "� �����i ��������i, ��i� ��������� ���������� ����������, �����������: \n" "Mandrakesoft\n" "43, rue d'Aboukir\n" "75002 Paris\n" "FRANCE" #: ../../install_steps_interactive.pm_.c:668 msgid "Choose a mirror from which to get the packages" msgstr "����� �������� ��� ��������� ������" #: ../../install_steps_interactive.pm_.c:676 msgid "Contacting the mirror to get the list of available packages" msgstr "������ � ��������� ��� ��������� ��i�� ��������� ������" #: ../../install_steps_interactive.pm_.c:679 msgid "Please choose the packages you want to install." msgstr "����� ������ ��� ����븢�i" #: ../../install_steps_interactive.pm_.c:691 msgid "Which is your timezone?" msgstr "��i ��� ������ ����?" #: ../../install_steps_interactive.pm_.c:693 msgid "Is your hardware clock set to GMT?" msgstr "��� �i������ ����i��i� ���������� �� GMT?" #: ../../install_steps_interactive.pm_.c:731 msgid "Which printing system do you want to use?" msgstr "���� �i����� ���������� �� ������� �������������?" #: ../../install_steps_interactive.pm_.c:758 msgid "No password" msgstr "���� ������" #: ../../install_steps_interactive.pm_.c:763 msgid "Use shadow file" msgstr "������������ ������ ����" #: ../../install_steps_interactive.pm_.c:763 msgid "shadow" msgstr "����" #: ../../install_steps_interactive.pm_.c:764 msgid "MD5" msgstr "MD5" #: ../../install_steps_interactive.pm_.c:764 msgid "Use MD5 passwords" msgstr "������������ �����i MD5" #: ../../install_steps_interactive.pm_.c:766 msgid "Use NIS" msgstr "������������ NIS" #: ../../install_steps_interactive.pm_.c:766 msgid "yellow pages" msgstr "����� �������i" #: ../../install_steps_interactive.pm_.c:772 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "���� ������ ������� ������ (��� ������ ���i��� ���� �� ���� %d �i���)" #: ../../install_steps_interactive.pm_.c:779 msgid "Authentification NIS" msgstr "��������i����� NIS" #: ../../install_steps_interactive.pm_.c:780 msgid "NIS Domain" msgstr "NIS Domain" #: ../../install_steps_interactive.pm_.c:780 msgid "NIS Server" msgstr "NIS ������:" #: ../../install_steps_interactive.pm_.c:805 #: ../../standalone/adduserdrake_.c:36 msgid "Accept user" msgstr "������� ����������i��" #: ../../install_steps_interactive.pm_.c:805 #: ../../standalone/adduserdrake_.c:36 msgid "Add user" msgstr "������ ����������i��" #: ../../install_steps_interactive.pm_.c:806 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "(already added %s)" msgstr "(��� ��������� %s)" #: ../../install_steps_interactive.pm_.c:806 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "�����i�� i�� ����������i��\n" "%s" #: ../../install_steps_interactive.pm_.c:808 #: ../../standalone/adduserdrake_.c:39 msgid "Real name" msgstr "������� i��" #: ../../install_steps_interactive.pm_.c:809 ../../printerdrake.pm_.c:93 #: ../../printerdrake.pm_.c:127 ../../standalone/adduserdrake_.c:40 msgid "User name" msgstr "I�� ����������i��:" #: ../../install_steps_interactive.pm_.c:814 #: ../../standalone/adduserdrake_.c:45 msgid "Shell" msgstr "��������:" #: ../../install_steps_interactive.pm_.c:816 #: ../../standalone/adduserdrake_.c:47 msgid "Icon" msgstr "�i��������" #: ../../install_steps_interactive.pm_.c:826 #: ../../standalone/adduserdrake_.c:57 msgid "This password is too simple" msgstr "���� ������ ������� ������" #: ../../install_steps_interactive.pm_.c:827 #: ../../standalone/adduserdrake_.c:58 msgid "Please give a user name" msgstr "���i �����, �����i�� i�� ����������i��" #: ../../install_steps_interactive.pm_.c:828 #: ../../standalone/adduserdrake_.c:59 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "I�� ����������i�� ���i��� �������� �i���� �����i �� �i��i� ���i����, \n" "�i���, `-' i `_'" #: ../../install_steps_interactive.pm_.c:829 #: ../../standalone/adduserdrake_.c:60 msgid "This user name is already added" msgstr "���� i�� ����������i�� ��� ���������" #: ../../install_steps_interactive.pm_.c:853 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "� ��������� ������������ ����� �� ������� ��������� Linux ��������� ��\n" " ������������ ����������. ���� ���� ���� ������, ���i �� �� ������� \n" "����븢���� SILO, ���i i���� ����������� �i����� ������� SILO, �i SILO �� \n" "���� ��������� � ����� ����i������i. ���������� ���� ������� ���� ���� \n" "���������� ������� � ��������� �������� Linux Mandrake, ���� �����i \n" "��������� ����������� �i����� ����� ����.\n" "\n" "���i ������� �������� ���������� ���� �����, ������ ������� � �����\n" "�������� i ���i��i�� \"Ok\"." #: ../../install_steps_interactive.pm_.c:869 msgid "First floppy drive" msgstr "����� ��������" #: ../../install_steps_interactive.pm_.c:870 msgid "Second floppy drive" msgstr "����i ��������" #: ../../install_steps_interactive.pm_.c:871 msgid "Skip" msgstr "�������i��" #: ../../install_steps_interactive.pm_.c:876 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" "� ��������� ������������ ����� �� ������� ��������� Linux ������� �� i \n" "����������� �����������. ���� ���� ���� ������, ���i �� �� ������� \n" "����븢���� LILO (�i Grub), ���i i���� ����������� �i����� ������� LILO,\n" "�i LILO �� ���� ��������� � ����� ����i������i. ���������� ���� ������� " "����\n" "���� ���������� ������� � ��������� �������� Linux Mandrake, ���� �����i \n" "��������� ����������� �i����� ����� ����.\n" "\n" "������� �������� ���������� ���� �����?" #: ../../install_steps_interactive.pm_.c:885 msgid "Sorry, no floppy drive available" msgstr "���������, ��� �������� ����������" #: ../../install_steps_interactive.pm_.c:888 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "�������� ��������, � ��i� ����� ��������� ����������� �������" #: ../../install_steps_interactive.pm_.c:894 #, c-format msgid "Insert a floppy in drive %s" msgstr "������ ������� � �������� %s" #: ../../install_steps_interactive.pm_.c:897 msgid "Creating bootdisk" msgstr "��������� ����������� �������" #: ../../install_steps_interactive.pm_.c:904 msgid "Preparing bootloader" msgstr "���������� ����������" #: ../../install_steps_interactive.pm_.c:913 msgid "Do you want to use aboot?" msgstr "�� ������� ������������� aboot?" #: ../../install_steps_interactive.pm_.c:916 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "������� ����븢�i aboot, \n" "���������� ����븢����, ���������� �� ���������� ��������� ������� �������?" #: ../../install_steps_interactive.pm_.c:925 msgid "Installation of bootloader failed. The following error occured:" msgstr "������ ����������� ���������� �� ���������. ���i��� ��������� �������:" #: ../../install_steps_interactive.pm_.c:939 ../../standalone/draksec_.c:20 msgid "Welcome To Crackers" msgstr "�������� ��������� � Crackers" #: ../../install_steps_interactive.pm_.c:940 ../../standalone/draksec_.c:21 msgid "Poor" msgstr "���� �����" #: ../../install_steps_interactive.pm_.c:941 ../../standalone/draksec_.c:22 msgid "Low" msgstr "�����" #: ../../install_steps_interactive.pm_.c:942 ../../standalone/draksec_.c:23 msgid "Medium" msgstr "������i" #: ../../install_steps_interactive.pm_.c:943 ../../standalone/draksec_.c:24 msgid "High" msgstr "�����i" #: ../../install_steps_interactive.pm_.c:944 ../../standalone/draksec_.c:25 msgid "Paranoid" msgstr "������i������" #: ../../install_steps_interactive.pm_.c:958 msgid "Miscellaneous questions" msgstr "���������� ������i" #: ../../install_steps_interactive.pm_.c:959 msgid "(may cause data corruption)" msgstr "(���� ������� ��i������ ��������)" #: ../../install_steps_interactive.pm_.c:959 msgid "Use hard drive optimisations?" msgstr "������������� �����i����� ��������� �����?" #: ../../install_steps_interactive.pm_.c:960 ../../standalone/draksec_.c:46 msgid "Choose security level" msgstr "�������� ������i" #: ../../install_steps_interactive.pm_.c:961 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "�������� �������� ����� RAM (��������� %d M�)" #: ../../install_steps_interactive.pm_.c:963 msgid "Removable media automounting" msgstr "��������i������� ������� ����������i��" #: ../../install_steps_interactive.pm_.c:965 msgid "Clean /tmp at each boot" msgstr "�������� /tmp ��� ������ ��������" #: ../../install_steps_interactive.pm_.c:968 msgid "Enable multi profiles" msgstr "�������� ���� ����i���" #: ../../install_steps_interactive.pm_.c:970 msgid "Enable num lock at startup" msgstr "��������� num lock ��� ������" #: ../../install_steps_interactive.pm_.c:973 msgid "Give the ram size in MB" msgstr "�������� ����� RAM � M�" #: ../../install_steps_interactive.pm_.c:975 msgid "Can't use supermount in high security level" msgstr "�� ���� ������������� ����i������� ��� �����i� �����i ������i" #: ../../install_steps_interactive.pm_.c:977 msgid "" "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n" "If you want to be root, you have to login as a user and then use \"su\".\n" "More generally, do not expect to use your machine for anything but as a " "server.\n" "You have been warned." msgstr "" "��������: ��� �����I� ���Ρ�I ������I ������ �� ROOT � ������I �� " "�����������!\n" "���i �� ������� �������i�� �� root, ���������� �� ����������i�, ����� \n" "���������� \"su\".� ���i� �������, ������ ������������� ������ �� ��� " "�����,\n" "� �����i �� ������.\n" "����� �� �����, ��� �� ���i �����������." #: ../../install_steps_interactive.pm_.c:982 msgid "" "Be carefull, having numlock enabled causes a lot of keystrokes to\n" "give digits instead of normal letters (eg: pressing `p' gives `6')" msgstr "" "������� �����i��, ��������� NumLock ���� �������i �� ����������\n" "����� ����i����� (���������, ���i�� �� `p' ��� `6')." #: ../../install_steps_interactive.pm_.c:1028 msgid "Do you want to generate an auto install floppy for linux replication?" msgstr "" "�i ������� �� �������� ������������ ����i-���� ��� ����i����i linux?" #: ../../install_steps_interactive.pm_.c:1030 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "������ ������� � �������� %s" #: ../../install_steps_interactive.pm_.c:1045 #: ../../install_steps_interactive.pm_.c:1075 msgid "Creating auto install floppy" msgstr "��������� ������� ��� ����븢�i" #: ../../install_steps_interactive.pm_.c:1100 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "��������� ����i �� ���������.\n" "�� ������� ������� �����i �����?" #: ../../install_steps_interactive.pm_.c:1109 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" "�i�����, ����븢�� ���������.\n" "�����i�� ���������� ���� i ���i��i�� enter ��� �����������i.\n" "�� i���������� ��� �������i ��������� ������� Linux-Mandrake,\n" "����������� �� http://www.linux-mandrake.com/.\n" "I��������� �� ��������� ����� �i����� ���� � �����-������������\n" "����� ������ ��������i�� ����������i�� � ��i������� Linux-Mandrake." #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "����븢�� Linux-Mandrake %s" #: ../../install_steps_newt.pm_.c:33 msgid "" " <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " msgstr "" " <Tab>/<Alt-Tab> ���i� ���������i | <Space> ����� | <F12> �������� ����� " #: ../../interactive.pm_.c:273 msgid "Please wait" msgstr "���i �����, ���������" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "�������������� (%s), ������� ���������\n" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:71 msgid "Bad choice, try again\n" msgstr "������ �����, ����������� ����\n" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr " ? (�������� %s) " #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "��� �����? (�������� %s) " #: ../../interactive_stdio.pm_.c:72 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "��� �����? (�������� %s. �����i�� `none' ��� ���������i) " #: ../../keyboard.pm_.c:105 ../../keyboard.pm_.c:135 msgid "Czech" msgstr "�����i" #: ../../keyboard.pm_.c:106 ../../keyboard.pm_.c:119 ../../keyboard.pm_.c:136 msgid "German" msgstr "������i" #: ../../keyboard.pm_.c:107 msgid "Dvorak" msgstr "Dvorak" #: ../../keyboard.pm_.c:108 ../../keyboard.pm_.c:142 msgid "Spanish" msgstr "I������i" #: ../../keyboard.pm_.c:109 ../../keyboard.pm_.c:143 msgid "Finnish" msgstr "�i���i" #: ../../keyboard.pm_.c:110 ../../keyboard.pm_.c:120 ../../keyboard.pm_.c:144 msgid "French" msgstr "���������i" #: ../../keyboard.pm_.c:111 ../../keyboard.pm_.c:164 msgid "Norwegian" msgstr "��������i" #: ../../keyboard.pm_.c:112 msgid "Polish" msgstr "������i" #: ../../keyboard.pm_.c:113 ../../keyboard.pm_.c:169 msgid "Russian" msgstr "����i" #: ../../keyboard.pm_.c:114 ../../keyboard.pm_.c:178 msgid "UK keyboard" msgstr "UK ����i�����" #: ../../keyboard.pm_.c:115 ../../keyboard.pm_.c:118 ../../keyboard.pm_.c:179 msgid "US keyboard" msgstr "US ����i�����" #: ../../keyboard.pm_.c:122 msgid "Armenian (old)" msgstr "�������i (�����)" #: ../../keyboard.pm_.c:123 msgid "Armenian (typewriter)" msgstr "�������i (typewriter)" #: ../../keyboard.pm_.c:124 msgid "Armenian (phonetic)" msgstr "�������i (���������)" #: ../../keyboard.pm_.c:127 msgid "Azerbaidjani (latin)" msgstr "������������� (latin)" #: ../../keyboard.pm_.c:128 msgid "Azerbaidjani (cyrillic)" msgstr "������������� (������)" #: ../../keyboard.pm_.c:129 msgid "Belgian" msgstr "�����i���i" #: ../../keyboard.pm_.c:130 msgid "Bulgarian" msgstr "��������i" #: ../../keyboard.pm_.c:131 msgid "Brazilian (ABNT-2)" msgstr "����i����i (ABNT-2)" #: ../../keyboard.pm_.c:132 msgid "Belarusian" msgstr "��������" #: ../../keyboard.pm_.c:133 msgid "Swiss (German layout)" msgstr "���������i (�������� ���������)" #: ../../keyboard.pm_.c:134 msgid "Swiss (French layout)" msgstr "���������i (����������� ���������)" #: ../../keyboard.pm_.c:137 msgid "German (no dead keys)" msgstr "������i (���� ������i������� ����i�)" #: ../../keyboard.pm_.c:138 msgid "Danish" msgstr "����i" #: ../../keyboard.pm_.c:139 msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../keyboard.pm_.c:140 msgid "Dvorak (Norwegian)" msgstr "Dvorak (��������i)" #: ../../keyboard.pm_.c:141 msgid "Estonian" msgstr "�������i" #: ../../keyboard.pm_.c:145 msgid "Georgian (\"Russian\" layout)" msgstr "����i���i (\"������\" ���������)" #: ../../keyboard.pm_.c:146 msgid "Georgian (\"Latin\" layout)" msgstr "����i���i (\"���i�����\" ���������)" #: ../../keyboard.pm_.c:147 msgid "Greek" msgstr "�������i" #: ../../keyboard.pm_.c:148 msgid "Hungarian" msgstr "��������i" #: ../../keyboard.pm_.c:149 msgid "Croatian" msgstr "�������i" #: ../../keyboard.pm_.c:150 msgid "Israeli" msgstr "I����" #: ../../keyboard.pm_.c:151 msgid "Israeli (Phonetic)" msgstr "I���� (���������)" #: ../../keyboard.pm_.c:152 msgid "Iranian" msgstr "I�����i" #: ../../keyboard.pm_.c:153 msgid "Icelandic" msgstr "I�������i" #: ../../keyboard.pm_.c:154 msgid "Italian" msgstr "I��������i" #: ../../keyboard.pm_.c:155 msgid "Japanese 106 keys" msgstr "������i 106 ����i�" #: ../../keyboard.pm_.c:156 msgid "Latin American" msgstr "���i��-����������i" #: ../../keyboard.pm_.c:158 msgid "Dutch" msgstr "��������i" #: ../../keyboard.pm_.c:159 msgid "Lithuanian AZERTY (old)" msgstr "�i����i AZERTY (�����)" #: ../../keyboard.pm_.c:161 msgid "Lithuanian AZERTY (new)" msgstr "�i����i AZERTY (����)" #: ../../keyboard.pm_.c:162 msgid "Lithuanian \"number row\" QWERTY" msgstr "�i����i \"����� �����\" QWERTY" #: ../../keyboard.pm_.c:163 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "�i����i \"���������\" QWERTY" #: ../../keyboard.pm_.c:165 msgid "Polish (qwerty layout)" msgstr "������i (����������� ���������)" #: ../../keyboard.pm_.c:166 msgid "Polish (qwertz layout)" msgstr "������i (qwertz ���������)" #: ../../keyboard.pm_.c:167 msgid "Portuguese" msgstr "�����������i" #: ../../keyboard.pm_.c:168 msgid "Canadian (Quebec)" msgstr "�������i (������)" #: ../../keyboard.pm_.c:170 msgid "Russian (Yawerty)" msgstr "����i (�-�-�-�-�-�)" #: ../../keyboard.pm_.c:171 msgid "Swedish" msgstr "�����i" #: ../../keyboard.pm_.c:172 msgid "Slovenian" msgstr "��������i" #: ../../keyboard.pm_.c:173 msgid "Slovakian" msgstr "�������i" #: ../../keyboard.pm_.c:174 msgid "Thai keyboard" msgstr "������� ����i�����" #: ../../keyboard.pm_.c:175 msgid "Turkish (traditional \"F\" model)" msgstr "������i (����������� \"F\" ������)" #: ../../keyboard.pm_.c:176 msgid "Turkish (modern \"Q\" model)" msgstr "������i (�������� \"Q\" ������)" #: ../../keyboard.pm_.c:177 msgid "Ukrainian" msgstr "����i���i" #: ../../keyboard.pm_.c:180 msgid "US keyboard (international)" msgstr "US ����i����� (�i���������)" #: ../../keyboard.pm_.c:181 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "���������i \"����� �����\" QWERTY" #: ../../keyboard.pm_.c:182 msgid "Yugoslavian (latin layout)" msgstr "��������i (���i����� ���������)" #: ../../mouse.pm_.c:25 msgid "Sun - Mouse" msgstr "Sun - ���" #: ../../mouse.pm_.c:31 msgid "Standard" msgstr "����������" #: ../../mouse.pm_.c:32 msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../mouse.pm_.c:33 ../../mouse.pm_.c:51 msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../mouse.pm_.c:34 msgid "GlidePoint" msgstr "GlidePoint" #: ../../mouse.pm_.c:36 ../../mouse.pm_.c:61 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../mouse.pm_.c:37 ../../mouse.pm_.c:57 msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../mouse.pm_.c:38 msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../mouse.pm_.c:43 msgid "Generic" msgstr "�������" #: ../../mouse.pm_.c:44 msgid "Wheel" msgstr "� �����" #: ../../mouse.pm_.c:47 msgid "serial" msgstr "����������" #: ../../mouse.pm_.c:49 msgid "Generic 2 Button Mouse" msgstr "��������� ��� � 2 �������" #: ../../mouse.pm_.c:50 msgid "Generic 3 Button Mouse" msgstr "��������� ��� � 3 �������" #: ../../mouse.pm_.c:52 msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../mouse.pm_.c:53 msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../mouse.pm_.c:55 msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../mouse.pm_.c:56 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../mouse.pm_.c:58 msgid "MM Series" msgstr "MM Series" #: ../../mouse.pm_.c:59 msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../mouse.pm_.c:60 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (����������, ����� ��� C7)" #: ../../mouse.pm_.c:64 #, fuzzy msgid "busmouse" msgstr "���� ����" #: ../../mouse.pm_.c:66 msgid "2 buttons" msgstr "2 �����i" #: ../../mouse.pm_.c:67 msgid "3 buttons" msgstr "3 �����i" #: ../../mouse.pm_.c:70 msgid "none" msgstr "����" #: ../../mouse.pm_.c:72 msgid "No mouse" msgstr "���� ����" #: ../../my_gtk.pm_.c:243 msgid "Next ->" msgstr "����� ->" #: ../../my_gtk.pm_.c:486 msgid "Is this correct?" msgstr "���� ��������?" #: ../../netconnect.pm_.c:93 msgid "Internet configuration" msgstr "��������� �������� I�������" #: ../../netconnect.pm_.c:94 msgid "Do you want to try to connect to the Internet now?" msgstr "�i ������� ����� ������������ ��������� �� I�������?" #: ../../netconnect.pm_.c:101 #, fuzzy msgid "Testing your connection..." msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:106 #, fuzzy msgid "The system is now connected to Internet." msgstr "�� ��������� �� i�������" #: ../../netconnect.pm_.c:107 #, fuzzy msgid "" "The system doesn't seem to be connected to internet.\n" "Try to reconfigure your connection." msgstr "��������� �� I������� / ����i�������� �����" #: ../../netconnect.pm_.c:141 ../../netconnect.pm_.c:213 #: ../../netconnect.pm_.c:232 ../../netconnect.pm_.c:244 #: ../../netconnect.pm_.c:256 msgid "ISDN Configuration" msgstr "��������� ISDN" #: ../../netconnect.pm_.c:141 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" "�������� ������ ����������.\n" "���i ��� ���� � ����� ��i��, �������� ��� ``I���''" #: ../../netconnect.pm_.c:158 msgid "Connection Configuration" msgstr "��������� ��������� �� I�������" #: ../../netconnect.pm_.c:159 msgid "Please fill or check the field below" msgstr "���i �����, �����i�� �i �������� ���� �i���" #: ../../netconnect.pm_.c:161 msgid "Card IRQ" msgstr "IRQ �����" #: ../../netconnect.pm_.c:162 msgid "Card mem (DMA)" msgstr "������ ������ ����� (DMA)" #: ../../netconnect.pm_.c:163 msgid "Card IO" msgstr "IO �����" #: ../../netconnect.pm_.c:164 msgid "Card IO_0" msgstr "IO_0 �����" #: ../../netconnect.pm_.c:165 msgid "Card IO_1" msgstr "IO_1 �����" #: ../../netconnect.pm_.c:166 msgid "Your personal phone number" msgstr "��� ����i��� ��������� �����" #: ../../netconnect.pm_.c:168 msgid "Provider name (ex provider.net)" msgstr "I�� ����������, ��������� ���������.net" #: ../../netconnect.pm_.c:169 msgid "Provider phone number" msgstr "����� �������� ����������" #: ../../netconnect.pm_.c:170 msgid "Provider dns 1" msgstr "DNS 1 ����������" #: ../../netconnect.pm_.c:171 msgid "Provider dns 2" msgstr "DNS 2 ����������" #: ../../netconnect.pm_.c:172 msgid "Dialing mode" msgstr "����� ��������" #: ../../netconnect.pm_.c:174 msgid "Account Login (user name)" msgstr "I�� ��� ������� (i�� ����������i��)" #: ../../netconnect.pm_.c:175 msgid "Account Password" msgstr "������ ��� �������" #: ../../netconnect.pm_.c:176 msgid "Confirm Password" msgstr "���������i�� ������" #: ../../netconnect.pm_.c:208 msgid "Europe" msgstr "ݢ����" #: ../../netconnect.pm_.c:208 msgid "Europe (EDSS1)" msgstr "ݢ���� (EDSS1)" #: ../../netconnect.pm_.c:210 msgid "Rest of the world" msgstr "�����������" #: ../../netconnect.pm_.c:210 msgid "Rest of the world - no D-Channel (leased lines)" msgstr "����������� - �� ���� D-����� (���������� ������)" #: ../../netconnect.pm_.c:214 msgid "Which protocol do you want to use ?" msgstr "��i �������� �� ������� �������������?" #: ../../netconnect.pm_.c:224 msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../netconnect.pm_.c:226 msgid "PCI" msgstr "PCI" #: ../../netconnect.pm_.c:228 msgid "I don't know" msgstr "�� ������" #: ../../netconnect.pm_.c:233 msgid "What kind of card do you have?" msgstr "��i ��� ����� �� �����?" #: ../../netconnect.pm_.c:239 msgid "Continue" msgstr "����������" #: ../../netconnect.pm_.c:241 msgid "Abort" msgstr "�����i��" #: ../../netconnect.pm_.c:245 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" "\n" "���i �� ����� ISA �����, ���i���i �� ��������� ������ ���i��� ���� " "���������i.\n" "\n" "���i �� ����� PCMCIA �����, �� ���i��� ������ irq i io ����� �����.\n" #: ../../netconnect.pm_.c:257 msgid "Which is your ISDN card ?" msgstr "���� � ��� ISDN �����?" #: ../../netconnect.pm_.c:281 msgid "I have found an ISDN Card:\n" msgstr "������i ISDN �����:\n" #: ../../netconnect.pm_.c:287 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" "��������� ISDN PCI �����, ��� �������� �� ���. ���i �����, �������� PCI " "����� �� ��������� ������." #: ../../netconnect.pm_.c:299 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "����� ISDN PCI �� ���������. ���i �����, �������� �� ��������� ������." #: ../../netconnect.pm_.c:331 #, fuzzy msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "�i ���i� ethernet ��������� ������� � ����� �i����� �� ���������. ���i " "�����, ����������� ����i��������� i���������." #: ../../netconnect.pm_.c:335 ../../standalone/drakgw_.c:222 msgid "Choose the network interface" msgstr "�������� ������� i��������" #: ../../netconnect.pm_.c:336 msgid "" "Please choose which network adapter you want to use to connect to Internet" msgstr "" "���i �����, �������� ������� �������, ��i �������� ������������� ��� " "��������� �� i�������" #: ../../netconnect.pm_.c:351 ../../netconnect.pm_.c:630 #: ../../netconnect.pm_.c:761 ../../standalone/drakgw_.c:217 msgid "Network interface" msgstr "������� i��������" #: ../../netconnect.pm_.c:352 msgid "" "\n" "Do you agree?" msgstr "" #: ../../netconnect.pm_.c:352 #, fuzzy msgid "I'm about to restart the network device:\n" msgstr "����������i�� ������� i��������. ������?" #: ../../netconnect.pm_.c:468 msgid "ADSL configuration" msgstr "��������� ADSL" #: ../../netconnect.pm_.c:469 msgid "Do you want to start your connection at boot?" msgstr "�� �������, ��� ����� �������� ���������� ��� ��������?" #: ../../netconnect.pm_.c:536 msgid "Try to find a modem?" msgstr "������������ ������i �����?" #: ../../netconnect.pm_.c:546 msgid "Please choose which serial port your modem is connected to." msgstr "�� ����� ����������� ����� �������� �����?" #: ../../netconnect.pm_.c:551 msgid "Dialup options" msgstr "��������� ������������ �������� (Dialup)" #: ../../netconnect.pm_.c:552 msgid "Connection name" msgstr "I�� ��������" #: ../../netconnect.pm_.c:553 msgid "Phone number" msgstr "����� ��������" #: ../../netconnect.pm_.c:554 msgid "Login ID" msgstr "I�� (login ID)" #: ../../netconnect.pm_.c:556 msgid "Authentication" msgstr "��������i�����" #: ../../netconnect.pm_.c:556 msgid "PAP" msgstr "PAP" #: ../../netconnect.pm_.c:556 msgid "Script-based" msgstr "�� ������ �������" #: ../../netconnect.pm_.c:556 msgid "Terminal-based" msgstr "�� ������ ����i����" #: ../../netconnect.pm_.c:557 msgid "Domain name" msgstr "I�� ������" #: ../../netconnect.pm_.c:559 msgid "First DNS Server" msgstr "����� ������ DNS" #: ../../netconnect.pm_.c:560 msgid "Second DNS Server" msgstr "����i ������ DNS:" #: ../../netconnect.pm_.c:589 #, fuzzy msgid "" "\n" "You can connect to Internet or reconfigure your connection." msgstr "��������� �� I������� / ����i�������� �����" #: ../../netconnect.pm_.c:589 ../../netconnect.pm_.c:593 #, fuzzy msgid "" "\n" "You can reconfigure your connection." msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:589 #, fuzzy msgid "You are not currently connected to Internet." msgstr "�� ��������� �� i�������" #: ../../netconnect.pm_.c:593 msgid "" "\n" "You can disconnect or reconfigure your connection." msgstr "" #: ../../netconnect.pm_.c:593 #, fuzzy msgid "You are currently connected to internet." msgstr "�� ��������� �� i�������" #: ../../netconnect.pm_.c:597 #, fuzzy msgid "Connect to Internet" msgstr "�������� � I�������" #: ../../netconnect.pm_.c:599 #, fuzzy msgid "Disconnect from Internet" msgstr "��������� �������� � i�������" #: ../../netconnect.pm_.c:601 #, fuzzy msgid "Configure network connection (LAN or Internet)" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:604 msgid "Internet connection & configuration" msgstr "I������� �������� i ����i�������" #: ../../netconnect.pm_.c:631 ../../netconnect.pm_.c:762 #, fuzzy msgid "" "I'm about to restart the network device $netc->{NET_DEVICE}. Do you agree?" msgstr "����������i�� ������� i��������. ������?" #: ../../netconnect.pm_.c:648 #, fuzzy msgid "Configure a normal modem connection" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:668 #, fuzzy msgid "Configure an ISDN connection" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:673 msgid "Internal ISDN card" msgstr "��������� ISDN �����" #: ../../netconnect.pm_.c:675 #, fuzzy msgid "External ISDN modem" msgstr "�����i �����" #: ../../netconnect.pm_.c:678 ../../netconnect.pm_.c:712 #: ../../netconnect.pm_.c:724 ../../netconnect.pm_.c:748 #: ../../netconnect.pm_.c:793 msgid "Connect to the Internet" msgstr "��������� �� I�������" #: ../../netconnect.pm_.c:679 msgid "What kind is your ISDN connection?" msgstr "��i ��� ������ ISDN ��������?" #: ../../netconnect.pm_.c:698 #, fuzzy msgid "Configure a DSL (or ADSL) connection" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:707 msgid "France" msgstr "�������" #: ../../netconnect.pm_.c:709 msgid "Other countries" msgstr "I���� ���i��" #: ../../netconnect.pm_.c:713 msgid "In which country are you located ?" msgstr "���� ���i�� ������ �����������?" #: ../../netconnect.pm_.c:719 msgid "Alcatel modem" msgstr "����� Alcatel" #: ../../netconnect.pm_.c:721 msgid "ECI modem" msgstr "����� ECI" #: ../../netconnect.pm_.c:725 msgid "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI." msgstr "" "���i ��� ADSL ����� ���� � ������� Alcatel, �������� Alcatel. � i���� " "������� - ECI." #: ../../netconnect.pm_.c:743 msgid "use pppoe" msgstr "������������� pppoe" #: ../../netconnect.pm_.c:745 msgid "don't use pppoe" msgstr "�� ������������� pppoe" #: ../../netconnect.pm_.c:749 msgid "" "The most common way to connect with adsl is dhcp + pppoe.\n" "However, some connections only use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" "�������� ������� ���i����� �������� ���� adsl ���� dhcp i pppoe.\n" "��� �, ���� �������� ����� �������� �����i ���i ������������ dhcp.\n" "���i �� �������, ��� ���i��, ���i����� '���������� pppoe'" #: ../../netconnect.pm_.c:772 #, fuzzy msgid "Configure a cable connection" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:794 msgid "" "Which dhcp client do you want to use?\n" "Default is dhcpd" msgstr "" "��i dhcp ��i��� �� �������� ������������?\n" "�� ��������, ���� dhcpd" #: ../../netconnect.pm_.c:807 #, fuzzy msgid "Disable Internet Connection" msgstr "��������� i������� ��������" #: ../../netconnect.pm_.c:818 msgid "Configure local network" msgstr "��������� ��������� ����i" #: ../../netconnect.pm_.c:822 #, fuzzy msgid "Network configuration" msgstr "����i������� ����i" #: ../../netconnect.pm_.c:823 #, fuzzy msgid "Do you want to restart the network" msgstr "�i ������� �������i������ ��������i?" #: ../../netconnect.pm_.c:831 msgid "Disable networking" msgstr "����i�� ���������� �������� ��������" #: ../../netconnect.pm_.c:841 #, fuzzy msgid "Configure the Internet connection / Configure local Network" msgstr "��������� �� I������� / ����i�������� �����" #: ../../netconnect.pm_.c:842 msgid "" "Local networking has already been configured.\n" "Do you want to:" msgstr "" "��������i ��������� ����i ��� ���������.\n" "�i ������� ��:" #: ../../netconnect.pm_.c:843 msgid "How do you want to connect to the Internet?" msgstr "�� �� �������� ��������� �� I�������?" #: ../../netconnect.pm_.c:865 msgid "Network Configuration" msgstr "����i������� ����i" #: ../../netconnect.pm_.c:866 msgid "" "Now that your Internet connection is configured,\n" "your computer can be configured to share its Internet connection.\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN).\n" "\n" "Would you like to setup the Internet Connection Sharing?\n" msgstr "" #: ../../network.pm_.c:253 msgid "no network card found" msgstr "�������� ����� �� ���������" #: ../../network.pm_.c:273 ../../network.pm_.c:340 msgid "Configuring network" msgstr "��������� ����i" #: ../../network.pm_.c:274 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" "�����i�� i�� ���� ������ (host).\n" "I�� ����� ������ ���i��� ���� ��������� �������,\n" "��������� ``mybox.mylab.myco.com''.\n" "�� ������ ������� �����i IP ����� �����, ���i �� � ��� ����." #: ../../network.pm_.c:278 ../../network.pm_.c:345 msgid "Host name" msgstr "I�� ������" #: ../../network.pm_.c:297 msgid "" "WARNING: This device has been previously configured to connect to the " "Internet.\n" "Simply press OK to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../network.pm_.c:302 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "���i �����, �����i�� IP ����i������� ��� ����� ������.\n" "����� ����� ���i��� ���� �������� �� IP ����� � ����������-��������� \n" "������i (���������, 1.2.3.4)." #: ../../network.pm_.c:311 ../../network.pm_.c:312 #, c-format msgid "Configuring network device %s" msgstr "��������� �������� ������� %s" #: ../../network.pm_.c:314 msgid "Automatic IP" msgstr "����������� IP" #: ../../network.pm_.c:314 msgid "IP address" msgstr "IP �����" #: ../../network.pm_.c:314 msgid "Netmask" msgstr "����� ����i" #: ../../network.pm_.c:315 msgid "(bootp/dhcp)" msgstr "(bootp/dhcp)" #: ../../network.pm_.c:321 ../../printerdrake.pm_.c:98 msgid "IP address should be in format 1.2.3.4" msgstr "IP ����� ���i��� ���� � ������� 1.2.3.4" #: ../../network.pm_.c:341 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" "�����i�� i�� ���� ������ (host).\n" "I�� ����� ������ ���i��� ���� ��������� �������,\n" "��������� ``mybox.mylab.myco.com''.\n" "�� ������ ������� �����i IP ����� �����, ���i �� � ��� ����." #: ../../network.pm_.c:346 msgid "DNS server" msgstr "DNS ������" #: ../../network.pm_.c:347 msgid "Gateway" msgstr "����" #: ../../network.pm_.c:348 msgid "Gateway device" msgstr "�������-����" #: ../../network.pm_.c:358 msgid "Proxies configuration" msgstr "��������� proxy ���������� �������" #: ../../network.pm_.c:359 msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../network.pm_.c:360 msgid "FTP proxy" msgstr "FTP proxy" #: ../../network.pm_.c:366 msgid "Proxy should be http://..." msgstr "Proxy ���i��� ���� http://..." #: ../../network.pm_.c:367 msgid "Proxy should be ftp://..." msgstr "Proxy ���i��� ���� ftp://..." #: ../../partition_table.pm_.c:540 msgid "Extended partition not supported on this platform" msgstr "�������� ������� �� ��������i������ ����� ����������" #: ../../partition_table.pm_.c:558 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" "�� ����� ��i��� � ����i�� �������, ��� � �� ��� ���������i �� ����������.\n" "���i�� ����� � ���, ��� ��������i�� ��������� �������� ���, ��� ��i��� i���\n" "������ �� ��������� (extended) ���������" #: ../../partition_table.pm_.c:651 #, c-format msgid "Error reading file %s" msgstr "������� ������� ����� %s" #: ../../partition_table.pm_.c:658 #, c-format msgid "Restoring from file %s failed: %s" msgstr "��������� � ����� %s �� ����������: %s" #: ../../partition_table.pm_.c:660 msgid "Bad backup file" msgstr "������ ���� ���������� ���ii" #: ../../partition_table.pm_.c:681 #, c-format msgid "Error writing to file %s" msgstr "������� ���i�� � ���� %s" #: ../../pkgs.pm_.c:20 msgid "mandatory" msgstr "����������" #: ../../pkgs.pm_.c:21 msgid "must have" msgstr "���i��� ����" #: ../../pkgs.pm_.c:22 msgid "important" msgstr "�����" #: ../../pkgs.pm_.c:24 msgid "very nice" msgstr "�����i �����" #: ../../pkgs.pm_.c:25 msgid "nice" msgstr "�����" #: ../../pkgs.pm_.c:26 ../../pkgs.pm_.c:27 msgid "interesting" msgstr "�i����" #: ../../pkgs.pm_.c:28 ../../pkgs.pm_.c:29 ../../pkgs.pm_.c:30 #: ../../pkgs.pm_.c:31 msgid "maybe" msgstr "���� ����" #: ../../pkgs.pm_.c:34 msgid "i18n (important)" msgstr "i18n (�����)" #: ../../pkgs.pm_.c:35 msgid "i18n (very nice)" msgstr "i18n (�����i �����)" #: ../../pkgs.pm_.c:36 msgid "i18n (nice)" msgstr "i18n (�����)" #: ../../printer.pm_.c:19 msgid "Local printer" msgstr "�������� �������" #: ../../printer.pm_.c:20 msgid "Remote printer" msgstr "�������� �������" #: ../../printer.pm_.c:21 msgid "Remote CUPS server" msgstr "�������� ������ CUPS" #: ../../printer.pm_.c:22 msgid "Remote lpd server" msgstr "�������� ������ lpd" #: ../../printer.pm_.c:23 msgid "Network printer (socket)" msgstr "������� ������� (socket)" #: ../../printer.pm_.c:24 msgid "SMB/Windows 95/98/NT" msgstr "SMB/Windows 95/98/NT" #: ../../printer.pm_.c:25 msgid "NetWare" msgstr "NetWare" #: ../../printer.pm_.c:26 ../../printerdrake.pm_.c:154 #: ../../printerdrake.pm_.c:156 msgid "Printer Device URI" msgstr "URI ��������" #: ../../printerdrake.pm_.c:19 msgid "Detecting devices..." msgstr "���������� ������..." #: ../../printerdrake.pm_.c:19 msgid "Test ports" msgstr "�������� �����" #: ../../printerdrake.pm_.c:35 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "������� �����i \"%s\" ��������� �� " #: ../../printerdrake.pm_.c:48 msgid "Local Printer Device" msgstr "�������� �������" #: ../../printerdrake.pm_.c:49 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" "�� ����� ����� �������� ��� ������� \n" "(/dev/lp0 ���i�������� LPT1:)?\n" #: ../../printerdrake.pm_.c:51 msgid "Printer Device" msgstr "���� ��������" #: ../../printerdrake.pm_.c:70 msgid "Remote lpd Printer Options" msgstr "����i ���������� �������� lpd" #: ../../printerdrake.pm_.c:71 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" "��� ��������i ��������� ����i ����� ��� ��������\n" "��������� i�� ���������� ������� i i�� ����i �����,\n" "� ���� �������� ������ ����� ��������� ������i." #: ../../printerdrake.pm_.c:74 msgid "Remote hostname" msgstr "�������� �����" #: ../../printerdrake.pm_.c:75 msgid "Remote queue" msgstr "��������� ����� �����" #: ../../printerdrake.pm_.c:84 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "����i �������� SMB (Windows 9x/NT)" #: ../../printerdrake.pm_.c:85 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" "��� ����� �� �������� SMB ��������� ��������� i�� ����� SMB (�� ����� " "������� � i����� � ����� TCP/IP) i ����� IP ������� �����, � ������� i�� " "�������, ��i ��������� � �������� ���������, i�� ����������i��, ������ i " "i��������� �� ������� �����." #: ../../printerdrake.pm_.c:90 msgid "SMB server host" msgstr "I�� ������� SMB" #: ../../printerdrake.pm_.c:91 msgid "SMB server IP" msgstr "IP ������� SMB" #: ../../printerdrake.pm_.c:92 msgid "Share name" msgstr "I�� ��� �������������� �������" #: ../../printerdrake.pm_.c:95 msgid "Workgroup" msgstr "������� �����" #: ../../printerdrake.pm_.c:120 msgid "NetWare Printer Options" msgstr "����i �������� NetWare" #: ../../printerdrake.pm_.c:121 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" "��� ����� �� ������� NetWare ��������� ��������� i�� ������� ����� NetWare " "(�� ����� ������� � i����� � ����� TCP/IP) i i�� ����i �����, ���� " "��������� ��������� ��������, � ������� i�� ����������i�� i ������." #: ../../printerdrake.pm_.c:125 msgid "Printer Server" msgstr "������ �����" #: ../../printerdrake.pm_.c:126 msgid "Print Queue Name" msgstr "I�� ����i �����" #: ../../printerdrake.pm_.c:138 msgid "Socket Printer Options" msgstr "����i ������ ��������" #: ../../printerdrake.pm_.c:139 msgid "" "To print to a socket printer, you need to provide the\n" "hostname of the printer and optionally the port number." msgstr "" "��� ��������� ���� ����� �������i, ��� ��������� �����������\n" "i�� �������� i ������� ��� ����� �����." #: ../../printerdrake.pm_.c:141 msgid "Printer Hostname" msgstr "I�� ��������" #: ../../printerdrake.pm_.c:142 msgid "Port" msgstr "����" #: ../../printerdrake.pm_.c:155 msgid "You can specify directly the URI to access the printer with CUPS." msgstr "�� ������ ��������� �������� URI ��� ��������� �� �������i � CUPS." #: ../../printerdrake.pm_.c:188 ../../printerdrake.pm_.c:240 msgid "What type of printer do you have?" msgstr "��i ��� �������i �� �����?" #: ../../printerdrake.pm_.c:200 ../../printerdrake.pm_.c:307 msgid "Do you want to test printing?" msgstr "������� �������i������ ����?" #: ../../printerdrake.pm_.c:203 ../../printerdrake.pm_.c:318 msgid "Printing test page(s)..." msgstr "���� �������� ��������" #: ../../printerdrake.pm_.c:210 ../../printerdrake.pm_.c:326 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Printing status:\n" "%s\n" "\n" "Does it work properly?" msgstr "" "�������� �������i ��������� ������ �����.\n" "����� ���, �� ������� ��������, ���� ������i �������� ���.\n" "������ �����:\n" "%s\n" "\n" "�� ������ ���������?" #: ../../printerdrake.pm_.c:214 ../../printerdrake.pm_.c:330 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" "�������� �������i ��������� ������ �����.\n" "����� ���, �� ������� ��������, ���� ������i �������� ���.\n" "�� ������ ���������?" #: ../../printerdrake.pm_.c:230 msgid "Yes, print ASCII test page" msgstr "���, ����������� �������� ������ ASCII" #: ../../printerdrake.pm_.c:231 msgid "Yes, print PostScript test page" msgstr "���, ����������� �������� ������ PostScript" #: ../../printerdrake.pm_.c:232 msgid "Yes, print both test pages" msgstr "���, ����������� ������ �������i ������" #: ../../printerdrake.pm_.c:239 msgid "Configure Printer" msgstr "��������� ��������" #: ../../printerdrake.pm_.c:272 msgid "Printer options" msgstr "����i ��������" #: ../../printerdrake.pm_.c:273 msgid "Paper Size" msgstr "������ ������" #: ../../printerdrake.pm_.c:274 msgid "Eject page after job?" msgstr "����������� ������ ����� �����?" #: ../../printerdrake.pm_.c:279 msgid "Uniprint driver options" msgstr "��������� �������� Uniprint" #: ../../printerdrake.pm_.c:280 msgid "Color depth options" msgstr "��������� ����i�i ������" #: ../../printerdrake.pm_.c:282 msgid "Print text as PostScript?" msgstr "��������� ����� �� PostScript?" #: ../../printerdrake.pm_.c:283 msgid "Reverse page order" msgstr "��������� ������� ��������" #: ../../printerdrake.pm_.c:285 msgid "Fix stair-stepping text?" msgstr "����������� ����������� �����?" #: ../../printerdrake.pm_.c:288 msgid "Number of pages per output pages" msgstr "����� �������i �� ��������i ������������ ��������" #: ../../printerdrake.pm_.c:289 msgid "Right/Left margins in points (1/72 of inch)" msgstr "������/����� ���i � ������� (1/72 ������)" #: ../../printerdrake.pm_.c:290 msgid "Top/Bottom margins in points (1/72 of inch)" msgstr "�������/�i���� ���i � ������� (1/72 ������)" #: ../../printerdrake.pm_.c:293 msgid "Extra GhostScript options" msgstr "���������� ����i GhostScript" #: ../../printerdrake.pm_.c:296 msgid "Extra Text options" msgstr "���������� ��������� ������" #: ../../printerdrake.pm_.c:346 msgid "Printer" msgstr "�������" #: ../../printerdrake.pm_.c:347 msgid "Would you like to configure a printer?" msgstr "������� ������i�� �������?" #: ../../printerdrake.pm_.c:350 msgid "" "Here are the following print queues.\n" "You can add some more or change the existing ones." msgstr "" "��� ���������� ����i �����.\n" "�� ������ ������ ����, ����� ����i�� i�������." #: ../../printerdrake.pm_.c:365 #, fuzzy msgid "CUPS starting" msgstr "��������" #: ../../printerdrake.pm_.c:365 msgid "Reading CUPS drivers database..." msgstr "" #: ../../printerdrake.pm_.c:379 ../../printerdrake.pm_.c:398 #: ../../printerdrake.pm_.c:411 ../../printerdrake.pm_.c:418 msgid "Select Printer Connection" msgstr "����� ���� �������� ��������" #: ../../printerdrake.pm_.c:380 ../../printerdrake.pm_.c:412 msgid "How is the printer connected?" msgstr "�� ������� ��������?" #: ../../printerdrake.pm_.c:387 msgid "Select Remote Printer Connection" msgstr "����� ���� �������� � ��������� ���������" #: ../../printerdrake.pm_.c:388 msgid "" "With a remote CUPS server, you do not have to configure\n" "any printer here; printers will be automatically detected.\n" "In case of doubt, select \"Remote CUPS server\"." msgstr "" "�������� CUPS ������ �� �������� �� ��� �������� ��������\n" "�� ����� ������, �� ����� ��������� ����������.\n" "��� �� �� ��������, �������� \"�������� ������ CUPS\"." #: ../../printerdrake.pm_.c:399 ../../printerdrake.pm_.c:418 msgid "Remove queue" msgstr "�����i�� ����� �����" #: ../../printerdrake.pm_.c:400 msgid "" "Every printer need a name (for example lp).\n" "Other parameters such as the description of the printer or its location\n" "can be defined. What name should be used for this printer and\n" "how is the printer connected?" msgstr "" "������ ����� �����, � ���� ����������� ������i ��� �����, �������� " "���������� i�� (�������� lp). ����i� ���������, ���i� �� ��i����� �������i " "�i\n" " ��� �������������, ������ ���� ���������. ���� i�� �� �������i �� �������\n" "������������ i �� ����� �������� ����������?" #: ../../printerdrake.pm_.c:404 msgid "Name of printer" msgstr "I�� �������i" #: ../../printerdrake.pm_.c:405 msgid "Description" msgstr "��i�����" #: ../../printerdrake.pm_.c:406 msgid "Location" msgstr "�������������" #: ../../printerdrake.pm_.c:419 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue and how is the printer " "connected?" msgstr "" "������ ����� �����, � ���� ����������� ������i ��� �����, �������� " "���������� i�� (�������� lp) i ����������� � �� �������� ����i���. �������� " "i�� i ������� ��� ����i." #: ../../printerdrake.pm_.c:422 msgid "Name of queue" msgstr "I�� ����i �����" #: ../../printerdrake.pm_.c:423 msgid "Spool directory" msgstr "���������� ����i���" #: ../../printerdrake.pm_.c:424 msgid "Printer Connection" msgstr "�������� ��������" #: ../../raid.pm_.c:32 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "�� ������i������ ������ ������� �� _��������i������_ RAID md%d" #: ../../raid.pm_.c:102 msgid "Can't write file $file" msgstr "�� ������i������ ���i� � ���� $file" #: ../../raid.pm_.c:127 msgid "mkraid failed" msgstr "mkraid �� ������������" #: ../../raid.pm_.c:127 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid �� ������������ (���� raid ������� ������i�����?)" #: ../../raid.pm_.c:143 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "������������ �������� ��� RAID ������ %d\n" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "Anacron, ���������� �������� ����������i�." #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "ampd ��������������� ��� ����������� ������� ������i i �������� " "���������i.\n" "��� ����� ������������� ��� ���������� ������ ��� �i��i� ������� ������i." #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "�������, ��i� �����������, �i������� �� �������� i ���� �� ���������\n" "i ����������� ����� ������, ���i �������� �����i �i��� �����������." #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron - ����������� UNIX ��������, ���� �������� �������� ����������i��\n" "���� ���������� ������� ����. Vixie cron ����� ��� ���������� �� " "������������\n" "UNIX cron, ��������� ����� �������� ������i i ������ ����i���������� ����i." #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM ����� ��������� ���i �� ��������, ��i� �������� � ��������� ������,\n" "���i� �� Midnight Commander. ���� �������� ������������� ��� ��� " "���i������i i ������,\n" "i ������� ��������� ����������� (pop-up) ���� � ��������� ������." #: ../../services.pm_.c:26 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" "Apache - ���� World Wide Web ������. �� ��������������� ��� ������������\n" "HTML ����� i CGI." #: ../../services.pm_.c:28 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "I������� �����������-����� (���������� inetd) �������� ��� ������ \n" "��������� ������ i������� ������, ��i� ���������. ��� ����� ������������� " "��� �����\n" "����i� ������, ��������� telnet, ftp, rsh i rlogin. ����i��� inetd, " "����i����\n" "��� ������, �� ��i� �� ��������." #: ../../services.pm_.c:32 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "���� ����� �������� ������� ��������� ����i����� �� ����� �\n" "/etc/sysconfig/keyboard. ��� ���� ���� ������ ������� � ��������� " "kbdconfig.\n" "�� ������ ����i�� ��������� �� ��� ����i� �����." #: ../../services.pm_.c:35 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd - ���� ����� �����, �������� ��� ��������� ����� lpr. ����\n" "������, ��i �i��� ������ ��������(�)." #: ../../services.pm_.c:37 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" "named (BIND) - ���� ������ �������� i���, ��i ��������������� ���\n" "������������ i�� ����� � IP ������." #: ../../services.pm_.c:39 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "����i������ i �������i������ ��� �������� �������� �i����� (NFS),\n" " SMB (Lan Manager/Windows) i NCP (Netware) �����i ����i�������." #: ../../services.pm_.c:41 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "�����i������/�������i������ ��� �������� i���������, �����i��������� ���\n" "������ ��� �������� �i�����." #: ../../services.pm_.c:43 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS - ���� ������ �������� ��� ������� �� ����� ���� TCP/IP ����i.\n" "����� ������ �������������� NFS ��������, ��i ����i��������� ����\n" "/etc/exports ����." #: ../../services.pm_.c:46 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS - ���� ������� �������� ��� ������� �� ����� ���� TCP/IP\n" "����i. ����� ������ ������� �� ��������� �����i ���i� NFS ������i." #: ../../services.pm_.c:48 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "��������� PCMCIA - ���� �������� ��������� ���i� ����, �� Ethernet i\n" "������ � ��������. ��� ���� �����������i ����i�������� i�, ���i �� �����\n" "������ i� ����, �i ��� �� ������." #: ../../services.pm_.c:51 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper (���������i� �����) �i��� RPC ���������i, ��i� ��������\n" "��������������� ���i�i ����������i �� NFS i NIS. Portmap ������ ���i��� " "����������\n" "�� ������� ��i� �������� �� ������� ��� ���������, ��i� ������������� RPC." #: ../../services.pm_.c:54 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" "Postfix - ���� ������� ����������� �����, ��������, �������\n" "���������� ����� � ����� ������ �� ������." #: ../../services.pm_.c:56 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "�������� i �����i�� �i������ ������i��� ��� ��� ������� �����i\n" "��������� ���������� ���." #: ../../services.pm_.c:58 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "����� ������������i �������� ��� �����i���� ����i� IP ������������i\n" "��������� ���� RIP ��������. RIP ��������������� � ����� ������, �����\n" "��������� ��������� ������������i - � ���i�i� ������." #: ../../services.pm_.c:61 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "�������� rstat �������� ����������i��� ����i ������i����\n" "������ �������i ��� ������ ������ ����i." #: ../../services.pm_.c:63 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "�������� rusers �������� ����������i��� ����i ���������, ���\n" "������ i ������ �� ������� � �����." #: ../../services.pm_.c:65 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "�������� rwho ��� ���������� ����������i��� �������� ��i� ��i�\n" "����������i��, ��������� �� ������, ������ rwho ����� (������� �� finger)." #: ../../services.pm_.c:67 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog - ���� ������, � ��������� ����� ����i� ������ ���i������ " "�����������i\n" "� ������ ����� ���������i. ���� �����i ����� ��� ������ ����� ������ �����." #: ../../services.pm_.c:69 msgid "This startup script try to load your modules for your usb mouse." msgstr " ���� ������� ������ ������� ��� �����i ��� usb ���i." #: ../../services.pm_.c:70 msgid "Starts and stops the X Font Server at boot time and shutdown." msgstr "�������� i �������� X Font Server ��� �������� i ���������i." #: ../../services.pm_.c:99 msgid "Choose which services should be automatically started at boot time" msgstr "��������, ��i� ����i�� ��������� ���������� ��� ��������" #: ../../standalone/diskdrake_.c:61 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" "����i�� �������� �� ��������, ��� ������� �������� ��� ���� :(\n" "��������� i��i ����� i ���� ���������� ������� ��������" #: ../../standalone/drakboot_.c:25 msgid "Configure LILO/GRUB" msgstr "��������� LILO/GRUB" #: ../../standalone/drakboot_.c:26 msgid "Create a boot floppy" msgstr "�������� ����. ����" #: ../../standalone/drakboot_.c:28 msgid "Format floppy" msgstr "������i������ �������" #: ../../standalone/drakboot_.c:40 msgid "Choice" msgstr "�����" #: ../../standalone/drakboot_.c:59 msgid "Installation of LILO failed. The following error occured:" msgstr "����븢�� LILO �� ����������. ���i��� ��������� �������:" #: ../../standalone/drakgw_.c:103 msgid "Internet Connection Sharing currently enabled" msgstr "�������� I�������-�������� ����� �������" #: ../../standalone/drakgw_.c:104 #, fuzzy msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "����븢�� ��������� I�������-�������� ��������.\n" #: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:108 #, fuzzy msgid "disable" msgstr "����i��" #: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:118 #: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:137 msgid "dismiss" msgstr "" #: ../../standalone/drakgw_.c:107 ../../standalone/drakgw_.c:126 #, fuzzy msgid "reconfigure" msgstr "��������� X Window" #: ../../standalone/drakgw_.c:122 msgid "Internet Connection Sharing currently disabled" msgstr "�������� I�������-�������� ����� ����������" #: ../../standalone/drakgw_.c:123 #, fuzzy msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "����븢�� ��������� I�������-�������� ��������.\n" #: ../../standalone/drakgw_.c:126 ../../standalone/drakgw_.c:127 #, fuzzy msgid "enable" msgstr "����i��" #: ../../standalone/drakgw_.c:141 msgid "Config file content could not be interpreted." msgstr "�� ������������ ���������� ����� ����� ��������." #: ../../standalone/drakgw_.c:151 msgid "Internet Connection Sharing" msgstr "�������� I�������-��������" #: ../../standalone/drakgw_.c:152 msgid "" "Your computer can be configured to share its Internet connection.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN).\n" "\n" "Would you like to setup the Internet Connection Sharing?" msgstr "" #: ../../standalone/drakgw_.c:177 #, fuzzy msgid "using module" msgstr "����� ��������" #: ../../standalone/drakgw_.c:210 msgid "No network adapter on your system!" msgstr "� ����� ������ ���� �i������� ��������� ��������!" #: ../../standalone/drakgw_.c:211 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "�i ���i� ethernet ��������� ������� � ����� �i����� �� ���������. ���i " "�����, ����������� ����i��������� i���������." #: ../../standalone/drakgw_.c:218 #, fuzzy msgid "" "There is only one configured network adapter on your system:\n" "\n" "$interface\n" "\n" "Would you like to setup your Local Area Network with that adapter?" msgstr "" "���� �����i ���i� �����i�������� ������� ������� � ����� �i�����:\n" "\n" "$interface\n" "\n" "�i ��������� ���������� i������� �������� ���� ���� �������?" #: ../../standalone/drakgw_.c:223 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "���i �����, �������� ������� �������, �� ����� ����������� ��� ��������� �� " "����� ��������� ����i." #: ../../standalone/drakgw_.c:233 msgid "" "Warning, the network adapter is already configured.\n" "Would you like to reconfigure?" msgstr "" "�����, ������� ������� �����i��������.\n" "�i ������� ��������i�������� ���?" #: ../../standalone/drakgw_.c:258 msgid "Potential LAN address conflict found in current config of $_!\n" msgstr "������������ ����� ��� �����i���� � ������� ����i�������� $_!\n" #: ../../standalone/drakgw_.c:268 msgid "Firewalling configuration detected!" msgstr "��������� ������ �������� ������ (firewall)!" #: ../../standalone/drakgw_.c:269 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation. Proceed?" msgstr "" "�����! ��������� �������� �i����� �������� ������i (firewall). ��� ������� " "���������� ������������ �� ����� ����븢�i. �����?" #: ../../standalone/drakgw_.c:282 msgid "Configuring scripts, installing software, starting servers..." msgstr "������������ ���������, ����븢�� ��, ������ ������..." #: ../../standalone/drakgw_.c:282 #, fuzzy msgid "Configuring..." msgstr "��������� IDE" #: ../../standalone/drakgw_.c:313 msgid "Problems installing package $bin2rpm{$_}" msgstr "" #: ../../standalone/drakgw_.c:504 msgid "Congratulations!" msgstr "������ �i�������i!" #: ../../standalone/drakgw_.c:505 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../standalone/draksec_.c:28 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "���� �������� ��������� ������������� � ���������. �i����� ����� �������\n" "� ���������i, ��� i ����� ������: ���� �������� ������i ������ " "�������������\n" "�� �������, ��i� �������� �� ����i �i �� Internet. ������ �� ��������� " "�������." #: ../../standalone/draksec_.c:31 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "������ ����� ��������, ��� ������������ ����'����� � �����i ���������\n" "������� �� �������������." #: ../../standalone/draksec_.c:32 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" "���� �������� ������i ��� ����� �����������, � ������ �����\n" "�����i������ ��������� �������� i �������������." #: ../../standalone/draksec_.c:34 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" "���� ���������� �������� ������i, ��i ������������� ��� ����'�����,\n" "��i �������� �� Internet � �����i ��i����. ��������� ����� �������i\n" "������i." #: ../../standalone/draksec_.c:36 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" "�� ����� ������ ������i ������� ������������ �i����� � �����i\n" "�������. �������� ������i ���������� �����i ��� ������\n" "�������, ��i �������� �������i �� �����i�i�i ��i�����i." #: ../../standalone/draksec_.c:39 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "" "��������� �����i����i 4 ������, ��� ����� �i����� ������� ��������.\n" "��������� ������i ���������� �� ����i���." #: ../../standalone/draksec_.c:49 msgid "Setting security level" msgstr "��������i ������ ������i" #: ../../standalone/drakxconf_.c:21 msgid "Choose the tool you want to use" msgstr "�������� i���������, ��i ������� ����������" #: ../../standalone/keyboarddrake_.c:14 msgid "usage: keyboarddrake [--expert]\n" msgstr "" #: ../../standalone/keyboarddrake_.c:27 msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../standalone/livedrake_.c:23 #, fuzzy msgid "Change Cd-Rom" msgstr "����i�� ������ ������" #: ../../standalone/livedrake_.c:24 #, fuzzy msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "����i�� ��� Cd-Rom!\n" "\n" "���i �����, ������ Cd-Rom, �������� \"%s\", � ��� �������� i ���i��i�� O� " "�����.\n" "���i �� �� ����� ���, ���i��i�� �����i��, ��� �����i�� ����븢�� � ������ Cd." #: ../../standalone/livedrake_.c:34 msgid "Unable to start live upgrade !!!\n" msgstr "" #: ../../standalone/mousedrake_.c:32 msgid "no serial_usb found\n" msgstr "serial_usb �� ��������\n" #: ../../standalone/mousedrake_.c:37 msgid "Emulate third button?" msgstr "��������� ������ ������?" #: ../../standalone/mousedrake_.c:41 msgid "Which serial port is your mouse connected to?" msgstr "�� ����� ����������� ����� �������� ���� ���?" #: ../../standalone/rpmdrake_.c:25 msgid "reading configuration" msgstr "������� ��������i" #: ../../standalone/rpmdrake_.c:45 ../../standalone/rpmdrake_.c:50 #: ../../standalone/rpmdrake_.c:253 msgid "File" msgstr "����" #: ../../standalone/rpmdrake_.c:48 ../../standalone/rpmdrake_.c:229 #: ../../standalone/rpmdrake_.c:253 ../../standalone/rpmdrake_.c:269 msgid "Search" msgstr "�����" #: ../../standalone/rpmdrake_.c:49 ../../standalone/rpmdrake_.c:56 msgid "Package" msgstr "�����" #: ../../standalone/rpmdrake_.c:51 msgid "Text" msgstr "�����" #: ../../standalone/rpmdrake_.c:53 msgid "Tree" msgstr "�����" #: ../../standalone/rpmdrake_.c:54 msgid "Sort by" msgstr "������������ ��" #: ../../standalone/rpmdrake_.c:55 msgid "Category" msgstr "���������" #: ../../standalone/rpmdrake_.c:58 msgid "See" msgstr "��." #: ../../standalone/rpmdrake_.c:59 ../../standalone/rpmdrake_.c:163 msgid "Installed packages" msgstr "����������� ������" #: ../../standalone/rpmdrake_.c:60 msgid "Available packages" msgstr "��������� ������" #: ../../standalone/rpmdrake_.c:62 msgid "Show only leaves" msgstr "�������� ��� �i���" #: ../../standalone/rpmdrake_.c:67 msgid "Expand all" msgstr "�������� ��" #: ../../standalone/rpmdrake_.c:68 msgid "Collapse all" msgstr "�������� ��" #: ../../standalone/rpmdrake_.c:70 msgid "Configuration" msgstr "���������" #: ../../standalone/rpmdrake_.c:71 msgid "Add location of packages" msgstr "������ ����i�� ������" #: ../../standalone/rpmdrake_.c:75 msgid "Update location" msgstr "����i�� ����i��" #: ../../standalone/rpmdrake_.c:79 ../../standalone/rpmdrake_.c:328 msgid "Remove" msgstr "��i�����" #: ../../standalone/rpmdrake_.c:100 msgid "Configuration: Add Location" msgstr "���������: ������ ����i��" #: ../../standalone/rpmdrake_.c:103 msgid "Find Package" msgstr "����� ������" #: ../../standalone/rpmdrake_.c:104 msgid "Find Package containing file" msgstr "������i �����, ��i ��� ����" #: ../../standalone/rpmdrake_.c:105 msgid "Toggle between Installed and Available" msgstr "����������� ����������/��������" #: ../../standalone/rpmdrake_.c:139 msgid "Files:\n" msgstr "�����:\n" #: ../../standalone/rpmdrake_.c:161 ../../standalone/rpmdrake_.c:209 msgid "Uninstall" msgstr "�����i�� � �i�����" #: ../../standalone/rpmdrake_.c:163 msgid "Choose package to install" msgstr "����� ������ ��� ����븢�i" #: ../../standalone/rpmdrake_.c:190 msgid "Checking dependencies" msgstr "�������� �����������" #: ../../standalone/rpmdrake_.c:190 ../../standalone/rpmdrake_.c:409 msgid "Wait" msgstr "�������" #: ../../standalone/rpmdrake_.c:209 msgid "The following packages are going to be uninstalled" msgstr "��������� ������ ������ �������� � �i�����" #: ../../standalone/rpmdrake_.c:210 msgid "Uninstalling the RPMs" msgstr "��������� �������� RPM-������ � �i�����" #: ../../standalone/rpmdrake_.c:229 ../../standalone/rpmdrake_.c:269 msgid "Regexp" msgstr "Regexp" #: ../../standalone/rpmdrake_.c:229 msgid "Which package are looking for" msgstr "��i� ������ ������" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 #, c-format msgid "%s not found" msgstr "�� ������i %s" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No match" msgstr "�� ���������" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No more match" msgstr "����� �� ���������" #: ../../standalone/rpmdrake_.c:246 msgid "" "rpmdrake is currently in ``low memory'' mode.\n" "I'm going to relaunch rpmdrake to allow searching files" msgstr "" "rpmdrake ����� � ������ ``low memory''.\n" "rpmdrake ����� ������������� ����� ������������ ������ �����" #: ../../standalone/rpmdrake_.c:253 msgid "Which file are you looking for?" msgstr "��i ���� �� �������?" #: ../../standalone/rpmdrake_.c:269 msgid "What are looking for?" msgstr "��� �� ������� �������?" #: ../../standalone/rpmdrake_.c:289 msgid "Give a name (eg: `extra', `commercial')" msgstr "����� i�� (����.: `extra', `commercial')" #: ../../standalone/rpmdrake_.c:291 msgid "Directory" msgstr "�������" #: ../../standalone/rpmdrake_.c:294 msgid "No cdrom available (nothing in /mnt/cdrom)" msgstr "cdrom ���������� (�i���� ���� � /mnt/cdrom)" #: ../../standalone/rpmdrake_.c:298 msgid "URL of the directory containing the RPMs" msgstr "URL ��������, ��i ������� RPM" #: ../../standalone/rpmdrake_.c:299 msgid "" "For FTP and HTTP, you need to give the location for hdlist\n" "It must be relative to the URL above" msgstr "" "��� FTP i HTTP, �� ���i��� ��������� ����������� hdlist\n" "��������� ������� ����� ����������� URL" #: ../../standalone/rpmdrake_.c:302 msgid "Please submit the following information" msgstr "��������� ��������� i���������" #: ../../standalone/rpmdrake_.c:304 #, c-format msgid "%s is already in use" msgstr "%s ��� ���������������" #: ../../standalone/rpmdrake_.c:315 ../../standalone/rpmdrake_.c:321 #: ../../standalone/rpmdrake_.c:329 msgid "Updating the RPMs base" msgstr "��������� ���� ������ RPM" #: ../../standalone/rpmdrake_.c:328 #, c-format msgid "Going to remove entry %s" msgstr "������ �������� ����� %s" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves" msgstr "����� �i���" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves takes some time" msgstr "����� �i��� �������� �������� ���" # ../../share/compssUsers msgid "Graphics Manipulation" msgstr "" # ../../share/compssUsers msgid "KDE, QT, Gnome, GTK+" msgstr "" # ../../share/compssUsers msgid "Personnal Finance" msgstr "" # ../../share/compssUsers msgid "Python, Perl, libraries, tools" msgstr "" # ../../share/compssUsers msgid "Scientific applications" msgstr "" # ../../share/compssUsers msgid "Databases" msgstr "" #, fuzzy msgid "Internet" msgstr "�i����" # ../../share/compssUsers msgid "Multimedia - Graphics" msgstr "" # ../../share/compssUsers msgid "editors, shells, file tools, terminals" msgstr "" #, fuzzy msgid "Development applications" msgstr "��� ���������i" # ../../share/compssUsers msgid "Audio-related tools: mp3 or midi players, mixers, etc" msgstr "" # ../../share/compssUsers msgid "Multimedia" msgstr "" #, fuzzy msgid "Office" msgstr "�����" # ../../share/compssUsers msgid "Sciences" msgstr "" # ../../share/compssUsers msgid "" "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and file " "transfer tools" msgstr "" # ../../share/compssUsers msgid "" "Set of tools to read and send mail and news (pine, mutt, tin..) and to " "browse the Web" msgstr "" # ../../share/compssUsers msgid "C and C++ development libraries, programs and include files" msgstr "" # ../../share/compssUsers msgid "Communication facilities" msgstr "" #, fuzzy msgid "KDE" msgstr "IDE" # ../../share/compssUsers msgid "Personnal Information Management" msgstr "" # ../../share/compssUsers msgid "Programs to manage your finance, such as gnucash" msgstr "" #, fuzzy msgid "Gnome" msgstr "����" #, fuzzy msgid "Internet Tools" msgstr "��������� �������� I�������" #, fuzzy msgid "Documentation" msgstr "��������i�����" # ../../share/compssUsers msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" # ../../share/compssUsers msgid "Utilities" msgstr "" # ../../share/compssUsers msgid "Multimedia - Sound" msgstr "" # ../../share/compssUsers msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" # ../../share/compssUsers msgid "Video players and editors" msgstr "" # ../../share/compssUsers msgid "Console Tools" msgstr "" #, fuzzy msgid "Development other" msgstr "��� ���������i" # ../../share/compssUsers msgid "Databases clients and servers (mysql and postgresql)" msgstr "" # ../../share/compssUsers msgid "Sound and video playing/editing programs" msgstr "" # ../../share/compssUsers msgid "Books and Howto's on Linux and Free Software" msgstr "" # ../../share/compssUsers msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" # ../../share/compssUsers msgid "Games" msgstr "" #, fuzzy msgid "Development C/C++" msgstr "��� ���������i" # ../../share/compssUsers msgid "Multimedia - Video" msgstr "" # ../../share/compssUsers msgid "Graphics programs such as The Gimp" msgstr "" # ../../share/compssUsers msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" # ../../share/compssUsers msgid "Tools to create and burn CD's" msgstr "" # ../../share/compssUsers msgid "More Graphical Desktops (Gnome, IceWM)" msgstr "" # ../../share/compssUsers msgid "Multimedia - CD Burning" msgstr "" # ../../share/compssUsers msgid "Archiving, emulators, monitoring" msgstr "" # ../../share/compssUsers msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" # ../../share/compssUsers msgid "Other Graphical Desktops" msgstr "" # ../../share/compssUsers msgid "Tools for your Palm Pilot or your Visor" msgstr "" # ../../share/compssUsers msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" # ../../share/compssUsers msgid "Set of tools for mail, news, web, file transfer, and chat" msgstr "" #~ msgid "Could not install ipchains RPM with urpmi." #~ msgstr "�� ������������ ���������� RPM ``ipchains'' � ��������� urpmi." #~ msgid "Could not install dhcp RPM with urpmi." #~ msgstr "�� ������������ ���������� RPM ``dhcp'' � ��������� urpmi." #~ msgid "Could not install linuxconf RPM with urpmi." #~ msgstr "�� ������������ ���������� RPM ``linuxconf'' � ��������� urpmi." #~ msgid "Could not install bind RPM with urpmi." #~ msgstr "�� ������������ ���������� RPM ``bind'' � ��������� urpmi." #~ msgid "Could not install caching-nameserver RPM with urpmi." #~ msgstr "" #~ "�� ������������ ���������� RPM ����������� ������� i��� � ��������� urpmi." #~ msgid "Reconfigure local network" #~ msgstr "��������i���������� ��������� �����" #~ msgid "" #~ "Your computer can be configured to share its Internet connection.\n" #~ "\n" #~ msgstr "" #~ "��� �����'���� ���� ���� �����i�������� �� ��������� I�������-��������.\n" #~ msgid "Everything has been configured.\n" #~ msgstr "�� �����i��������.\n" #~ msgid "Connect to Internet with a normal modem" #~ msgstr "�������� � i������� ���� �������� �����" #~ msgid "Connect to Internet using ISDN" #~ msgstr "�������� � i������� �� ISDN" #~ msgid "Connect to Internet using DSL (or ADSL)" #~ msgstr "��������� �� i������� ���� DSL (�i ADSL)" #~ msgid "Connect to Internet using Cable" #~ msgstr "��������� �� I������� ���� ������ (�����)" #~ msgid "" #~ "Time (secs) of inactivity after which\n" #~ "it hangs up. (leave blank to disable it)" #~ msgstr "" #~ "��� (���) �����������i, ����� �����\n" #~ "������ ������. (���i���� ������, ��� �����i��)" #~ msgid "Germany" #~ msgstr "������i" #~ msgid "Germany (1TR6)" #~ msgstr "������i (1TR6)" #~ msgid "What do you wish to do?" #~ msgstr "��� �� ������ ����i��?" #~ msgid "Install/Rescue" #~ msgstr "����븢��/�����������" #~ msgid "Rescue" #~ msgstr "�����������" #~ msgid "Which partition type do you want?" #~ msgstr "��i ��� �������� ��� ��������?" #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "Choose \"Rescue\" if you wish to rescue a version of Linux-Mandrake already " #~ "installed.\n" #~ "\n" #~ "\n" #~ "Select:\n" #~ "\n" #~ " - Recommended: If you have never installed GNU/Linux before, choose this.\n" #~ "\n" #~ " - Customized: If you are familiar enough with GNU/Linux, you may then " #~ "choose\n" #~ " the primary usage for your machine. See below for details.\n" #~ "\n" #~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" #~ " perform a highly customized installation. As for a \"Customized\"\n" #~ " installation class, you will be able to select the usage for your " #~ "system.\n" #~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " #~ "DOING!\n" #~ msgstr "" #~ "�������� \"����������\", ���i � ��� ���� �� ���������� �i ����� ����ii\n" #~ "GNU/Linux, �����, ���i �� ������� ������������� �������i ����i� �i " #~ "������������.\n" #~ "\n" #~ "�������� \"����������\", ���i �� ������� ���������� ����������� ���������� " #~ "����i� Mandrake Linux:\n" #~ "\n" #~ "\n" #~ "��������:\n" #~ "\n" #~ " - �������������: ���i �� ����� �i���i �� ����븢���i \n" #~ " GNU/Linux, �������� ���� �����.\n" #~ "\n" #~ " - �� ������: ���� ����� ������������� � ��� �������, ���i �� ��������i \n" #~ " ����� � GNU/Linux, i ������� ���i ������� ����������\n" #~ " ������ i ������������ ��� ������ ���������. �����i�� �i��� " #~ "�������������.\n" #~ "\n" #~ " - �������: ����� ������ ������ ��������, ��� �� �������� ��������� " #~ "GNU/Linux\n" #~ " i ������� ������������� �����i �������� ����븢��. �� i � ������� \n" #~ " \"�� ������\"��� �������� ����� ������� ���������� �������� i \n" #~ " ������������ ������ ���������.\n" #~ " ���i �����, �� ���I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� " #~ "����I����!\n" #~ msgid "" #~ "At this point, you may choose what partition(s) to use to install\n" #~ "your Linux-Mandrake system if they have been already defined (from a\n" #~ "previous install of GNU/Linux or from another partitioning tool). In other\n" #~ "cases, hard drive partitions must be defined. This operation consists of\n" #~ "logically dividing the computer's hard drive capacity into separate\n" #~ "areas for use.\n" #~ "\n" #~ "\n" #~ "If you have to create new partitions, use \"Auto allocate\" to " #~ "automatically\n" #~ "create partitions for GNU/Linux. You can select the disk for partitioning " #~ "by\n" #~ "clicking on \"hda\" for the first IDE drive,\n" #~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" #~ "\n" #~ "\n" #~ "Two common partition are: the root partition (/), which is the starting\n" #~ "point of the filesystem's directory hierarchy, and /boot, which contains\n" #~ "all files necessary to start the operating system when the\n" #~ "computer is first turned on.\n" #~ "\n" #~ "\n" #~ "Because the effects of this process are usually irreversible, partitioning\n" #~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n" #~ "simplifies the process so that it must not be. Consult the documentation\n" #~ "and take your time before proceeding.\n" #~ "\n" #~ "\n" #~ "You can reach any option using the keyboard: navigate through the " #~ "partitions\n" #~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n" #~ "\n" #~ "- Ctrl-c to create a new partition (when an empty partition is selected)\n" #~ "\n" #~ "- Ctrl-d to delete a partition\n" #~ "\n" #~ "- Ctrl-m to set the mount point\n" #~ msgstr "" #~ "����� ����� ���������, ��i� �������� ������������� ��� �������i\n" #~ "����� �i����� Linux-Mandrake, ���i ��� ��� ���i ��������� (��� ����������\n" #~ "����븢�� Linux ����� i���� ���������� ����i����). � i���� ��������\n" #~ "�������� ��������� ����� ���i��� ���� ���������. ���� �������� ���������� �\n" #~ "���i����� ����i��� �������� �������� ����'����� �� �������i\n" #~ "��������� ������������.\n" #~ "\n" #~ "\n" #~ "���i �� �������� �������� ����� ��������, �� ������ ���������� �����\n" #~ "\"���� �����������\", ��� ���������� �������� �������� GNU/Linux. �� " #~ "������\n" #~ "��������� ���� ��� ����i����, ���i��� �� \"hda\" ��� ������� IDE �����,\n" #~ "\"hdb\" ��� ������� ����� �i \"sda\" ��� ������� SCSI ����� i �.�.\n" #~ "\n" #~ "\n" #~ "��� ��������� �������� ���������: ������� ������� (/), ��i �'�������� " #~ "����������\n" #~ "������� i�����ii �������� �������� �i�����, i /boot, ��i ������� ���\n" #~ "�����, ���������� ��� ������� ����������� �i����� ��� ��������i ����'�����.\n" #~ "\n" #~ "\n" #~ "�������i ���i�i ������ ������� �������� ����������, ����i���� �� ��������\n" #~ "���� ���������� ���i���. DiskDrake �������� ���� ������, ���� ����������\n" #~ "���i��� ��i�����. �������i�� ������������ i ������������� ������.\n" #~ "\n" #~ "\n" #~ "������� ����� �������� ��� ��������� �� ������ ��������� � ���������\n" #~ "����i�����, ��������� ������������ ���i� ���������i � ��������� ����i� Tab\n" #~ "i Up/Down. ���i ������� ������, �� ������ �������������:\n" #~ "\n" #~ "- Ctrl-c ��� �������� ���� ������� (���i ��������� ������ ����� �������)\n" #~ "\n" #~ "- Ctrl-d ��� �����i�� �������\n" #~ "\n" #~ "- Ctrl-m ��� ��������� ������ ����i�������.\n" #~ msgid "" #~ "Any partitions that have been newly defined must be formatted for\n" #~ "use (formatting meaning creating a filesystem). At this time, you may\n" #~ "wish to re-format some already existing partitions to erase the data\n" #~ "they contain. Note: it is not necessary to re-format pre-existing\n" #~ "partitions, particularly if they contain files or data you wish to keep.\n" #~ "Typically retained are /home and /usr/local." #~ msgstr "" #~ "��� ���������� �������� ���i��� ���� ��������i������ ��� ������������\n" #~ "(������i������� ������� ��������� �������� �i�����). � ����� �i�����i\n" #~ "����� ����������i������ ��� i������� �������� ����� ��i������ ��������,\n" #~ "��i� ����������� �� i�. ������: ������i������ i������� �������� �� " #~ "����������,\n" #~ "�����i�� ���i ��� ��������� ����� i ��������, ��i� �� ������� ��������.\n" #~ "�������� ��������� /home i /usr/local." #~ msgid "" #~ "The packages selected are now being installed. This operation\n" #~ "should take a few minutes unless you have chosen to upgrade an\n" #~ "existing system, in that case it can take more time even before\n" #~ "upgrade starts." #~ msgstr "" #~ "����� �������� �������� �������� ������. ����� �������� �����\n" #~ "�������i ��i�i� ����, ���i �� �� ������i ��������� i������� �i�����,\n" #~ "� �����i� ������� ���� ���� ����������� ���� �� ������� ���������\n" #~ "��� ����i�� �i�����." #~ msgid "" #~ "If DrakX failed to find your mouse, or if you want to\n" #~ "check what it has done, you will be presented the list of mice\n" #~ "above.\n" #~ "\n" #~ "\n" #~ "If you agree with DrakX's settings, just click 'Ok'.\n" #~ "Otherwise you may choose the mouse that more closely matches your own\n" #~ "from the menu above.\n" #~ "\n" #~ "\n" #~ "In case of a serial mouse, you will also have to tell DrakX\n" #~ "which serial port it is connected to." #~ msgstr "" #~ "���i DrakX ����i���� ������ ���� ���, ������ �������� � ����\n" #~ "i��� �����. � ����i������ ������� �������� ����������� �������\n" #~ "�������� ���� � ��i�� �����.\n" #~ "\n" #~ "\n" #~ "� ������� ����, ���� �������� �� ����������� �����, ��� ����������� " #~ "�������i��\n" #~ "DrakX ����i���� ����� ����������� �����, �� ����� ��� ��������." #~ msgid "" #~ "This section is dedicated to configuring a local area\n" #~ "network (LAN) or a modem.\n" #~ "\n" #~ "Choose \"Local LAN\" and DrakX will\n" #~ "try to find an Ethernet adapter on your machine. PCI adapters\n" #~ "should be found and initialized automatically.\n" #~ "However, if your peripheral is ISA, autodetection will not work,\n" #~ "and you will have to choose a driver from the list that will appear then.\n" #~ "\n" #~ "\n" #~ "As for SCSI adapters, you can let the driver probe for the adapter\n" #~ "in the first time, otherwise you will have to specify the options\n" #~ "to the driver that you will have fetched from documentation of your\n" #~ "hardware.\n" #~ "\n" #~ "\n" #~ "If you install a Linux-Mandrake system on a machine which is part\n" #~ "of an already existing network, the network administrator will\n" #~ "have given you all necessary information (IP address, network\n" #~ "submask or netmask for short, and hostname). If you're setting\n" #~ "up a private network at home for example, you should choose\n" #~ "addresses.\n" #~ "\n" #~ "\n" #~ "Choose \"Dialup with modem\" and the Internet connection with\n" #~ "a modem will be configured. DrakX will try to find your modem,\n" #~ "if it fails you will have to select the right serial port where\n" #~ "your modem is connected to." #~ msgstr "" #~ "���� ������� ���������� ��������� ��������� ����i,\n" #~ "(LAN), ����� ������. \n" #~ "\n" #~ "�������� \"��������� �����\" i DrakX ��������� �����i\n" #~ "�� ����� ������ ������� Ethernet. �������� PCI ���i��� ���� ���������\n" #~ "i ��������� ����������. �����, ��� ����������i ISA,\n" #~ "�������������� �� ������, i ��� ���������� ���i���� �������\n" #~ "� ��i��, ��i �'��i��� ����� ������ � ����� �������.\n" #~ "\n" #~ "\n" #~ "�� i ��� �������� SCSI, �� ������ ������i�� �������� ���������\n" #~ "������� ����������, i���� ���������� �������� �������� ��������i,\n" #~ "��i� �� ���������� � �����������i �� ������ ������������.\n" #~ "\n" #~ "\n" #~ "��� ����븢�� Linux-Mandrake �� ����'����, ��i ������ �� ���\n" #~ "���������� �����, ���i�i�������� ����i ���������� �������i��\n" #~ "��� ��� ���������� i��������� (IP �����, ����� �������i\n" #~ "�i ��������� ��������, i i�� �����). ���i �� ���������\n" #~ "��������� �����, ��������� ����, �� ���i��� �������\n" #~ "��� ��������i ����������.\n" #~ "\n" #~ "\n" #~ "�������� \"�������� ���� �����\" ��� ��������i ��������\n" #~ "�� ��������� ���������� ����i Internet ���� �����. DrakX ���������\n" #~ "������i ��� �����, ��� ���i � ��� ���� �� ����������, ��� �����\n" #~ "�������� ���������� ��������� ������� ����, �� ����� �������� �����." #~ msgid "" #~ "GNU/Linux can deal with many types of printer. Each of these\n" #~ "types require a different setup. Note however that the print\n" #~ "spooler uses 'lp' as the default printer name; so you\n" #~ "must have one printer with such a name; but you can give\n" #~ "several names, separated by '|' characters, to a printer.\n" #~ "So, if you prefer to have a more meaningful name you just have\n" #~ "to put it first, eg: \"My Printer|lp\".\n" #~ "The printer having \"lp\" in its name(s) will be the default printer.\n" #~ "\n" #~ "\n" #~ "If your printer is physically connected to your computer, select\n" #~ "\"Local printer\". You will then have to tell which port your\n" #~ "printer is connected to, and select the appropriate filter.\n" #~ "\n" #~ "\n" #~ "If you want to access a printer located on a remote Unix machine,\n" #~ "you will have to select \"Remote lpd\". In order to make\n" #~ "it work, no username or password is required, but you will need\n" #~ "to know the name of the printing queue on this server.\n" #~ "\n" #~ "\n" #~ "If you want to access a SMB printer (which means, a printer located\n" #~ "on a remote Windows 9x/NT machine), you will have to specify its\n" #~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" #~ "plus the username, workgroup and password required in order to\n" #~ "access the printer, and of course the name of the printer. The same goes\n" #~ "for a NetWare printer, except that you need no workgroup information." #~ msgstr "" #~ "Linux ���� ��������� �� �����i�i�i �����i ������������ ������. ����� � " #~ "�����\n" #~ "���� �������� ������ ����븢�i.\n" #~ "\n" #~ "\n" #~ "���i ���� ������� ��� ���������� �������� ���������� �� ������ ����'�����,\n" #~ "�������� \"�������� �������\". ��� ����� �������� ���������, �� ����� �����\n" #~ "�������� ������� i ������� ����������� �i����.\n" #~ "\n" #~ "\n" #~ "���i �� ������� �������� ������ �� ��������, ��i �������i��� �� ���������\n" #~ "������ Unix, ��������� ������� \"��������� ����� lpd\". ��� ������i�� ���\n" #~ "���������, i�� i ������ �� ��������, ��� ��������� ������ i�� ����i �����\n" #~ "�� ����� �������.\n" #~ "\n" #~ "\n" #~ "��� ������� �� �������� SMB (��i �������i��� �� ��������� ������\n" #~ "Windows 9x/NT/2000 �i Unix � �������� Samba), ��������� ������ ��� i��\n" #~ "SMB (���� ���� �� �������� � ��� i����� � ����i TCP/IP), i, �������,\n" #~ "��� IP ����� i i�� ����������i��, ������� ����� i ������ ������� ��\n" #~ "��������, � ������� i�� ��������. ��� � ����� i ��� ��������\n" #~ "NetWare, �����i �� ����������� i��������� �� ������� �����." #~ msgid "" #~ "It is strongly recommended that you answer \"Yes\" here. If you install\n" #~ "Microsoft Windows at a later date it will overwrite the boot sector.\n" #~ "Unless you have made a bootdisk as suggested, you will not be able to\n" #~ "boot into GNU/Linux any more." #~ msgstr "" #~ "�������i�� ����������� �������� ��� \"���\"! ���� ���������, ���i ��\n" #~ "������������ Windows, ��� �������i�� ���������� ������.\n" #~ "���i �� �� �������i ���������� ����, �� ����� �� ������� ������i��\n" #~ "Linux!" #~ msgid "Move your wheel!" #~ msgstr "��������� ���� ����" #~ msgid "Forget the changes?" #~ msgstr "������ �������i?" #~ msgid "Cable connection" #~ msgstr "�������� �������" #~ msgid "Host name:" #~ msgstr "I�� ������:" #~ msgid "What is the type of your mouse?" #~ msgstr "��i ��� ����� ���i?" #~ msgid "Automatic resolutions" #~ msgstr "������������ ���������� ������ ������" #~ msgid "" #~ "To find the available resolutions I will try different ones.\n" #~ "Your screen will blink...\n" #~ "You can switch if off if you want, you'll hear a beep when it's over" #~ msgstr "" #~ "��� ������ ������������ ������ ������ ����� ���������� ������ ������. \n" #~ "��� ����� ����� �i����... ���i ��� �� ���������� �i�����, ��� ����� \n" #~ "��������, ���� ����� ���������� ����� ������ �����." #~ msgid "" #~ "I can try to find the available resolutions (eg: 800x600).\n" #~ "Sometimes, though, it may hang the machine.\n" #~ "Do you want to try?" #~ msgstr "" #~ "����� ������������ ������i ��������� ������ ������ (����.: 800x600).\n" #~ "� �����i ����i� ������� ���� ���� �������i �� �������� ����'����� .\n" #~ "������� ������������?" #~ msgid "" #~ "No valid modes found\n" #~ "Try with another video card or monitor" #~ msgstr "" #~ "������������ ������ �� ���������.\n" #~ "����������� ������� i���� �i�������� �i ���i���" #~ msgid "Automatical resolutions search" #~ msgstr "����������� ����� ������ ������" #~ msgid "dhcpd" #~ msgstr "dhcpd" #~ msgid "pump" #~ msgstr "pump" #~ msgid "dhcpxd" #~ msgstr "dhcpxd" #~ msgid "dhcp-client" #~ msgstr "dhcp-client" #~ msgid "nfs mount failed" #~ msgstr "������� ����i������� nfs" #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake " #~ "Linux:\n" #~ "%s or %s.\n" #~ "\n" #~ "\n" #~ "Select:\n" #~ "\n" #~ " - Recommended: If you have never installed GNU/Linux before, choose this.\n" #~ "\n" #~ " - Customized: If you are familiar enough with GNU/Linux, you may then " #~ "choose\n" #~ " the primary usage for your machine. See below for details.\n" #~ "\n" #~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" #~ " perform a highly customized installation. As for a \"Customized\"\n" #~ " installation class, you will be able to select the usage for your " #~ "system.\n" #~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " #~ "DOING!\n" #~ msgstr "" #~ "�������� \"����������\", ���i � ��� ���� �� ���������� �i ����� ����ii\n" #~ "GNU/Linux, �����, ���i �� ������� ������������� �������i ����i� �i " #~ "������������.\n" #~ "\n" #~ "�������� \"����������\", ���i �� ������� ���������� ����������� ���������� " #~ "����i� Mandrake Linux:\n" #~ "%s ����� %s.\n" #~ "\n" #~ "\n" #~ "��������:\n" #~ "\n" #~ " - �������������: ���i �� ����� �i���i �� ����븢���i \n" #~ " GNU/Linux, �������� ���� �����.\n" #~ "\n" #~ " - �� ������: ���� ����� ������������� � ��� �������, ���i �� ��������i \n" #~ " ����� � GNU/Linux, i ������� ���i ������� ����������\n" #~ " ������ i ������������ ��� ������ ���������. �����i�� �i��� " #~ "�������������.\n" #~ "\n" #~ " - �������: ����� ������ ������ ��������, ��� �� �������� ��������� " #~ "GNU/Linux\n" #~ " i ������� ������������� �����i �������� ����븢��. �� i � ������� \n" #~ " \"�� ������\"��� �������� ����� ������� ���������� �������� i \n" #~ " ������������ ������ ���������.\n" #~ " ���i �����, �� ���I����� ���� �����, ���I �� ��ݡ����, ��� ���I�� " #~ "����I����!\n" #~ msgid "Apple ADB Mouse" #~ msgstr "Apple ADB ���" #~ msgid "Apple ADB Mouse (2 Buttons)" #~ msgstr "Apple ADB ��� (2 �����i)" #~ msgid "Apple ADB Mouse (3+ Buttons)" #~ msgstr "Apple ADB ��� (3 �����i �i �����)" #~ msgid "Apple USB Mouse" #~ msgstr "Apple USB ���" #~ msgid "Apple USB Mouse (2 Buttons)" #~ msgstr "Apple USB ��� (2 �����i)" #~ msgid "Apple USB Mouse (3+ Buttons)" #~ msgstr "Apple USB ���� (3 �����i �i �����)" #~ msgid "ASCII MieMouse" #~ msgstr "ASCII MieMouse" #~ msgid "Genius NetMouse Pro" #~ msgstr "Genius NetMouse Pro" #~ msgid "ATI Bus Mouse" #~ msgstr "ATI Bus Mouse" #~ msgid "Microsoft Bus Mouse" #~ msgstr "Microsoft Bus Mouse" #~ msgid "Logitech Bus Mouse" #~ msgstr "Logitech Bus Mouse" #~ msgid "USB Mouse" #~ msgstr "USB ���" #~ msgid "USB Mouse (3 buttons or more)" #~ msgstr "USB ��� (3 �����i �i �����)" #~ msgid "Microsoft Rev 2.1A or higher (serial)" #~ msgstr "Microsoft Rev 2.1A ����� ����� (����������)" #~ msgid "Logitech MouseMan+/FirstMouse+ (serial)" #~ msgstr "Logitech MouseMan+/FirstMouse+ (����������)" #~ msgid "ASCII MieMouse (serial)" #~ msgstr "ASCII MieMouse (����������)" #~ msgid "Genius NetMouse (serial)" #~ msgstr "Genius NetMouse (����������)" #~ msgid "Microsoft IntelliMouse (serial)" #~ msgstr "Microsoft IntelliMouse (����������)" #~ msgid "Logitech MouseMan/FirstMouse (serial)" #~ msgstr "Logitech MouseMan/FirstMouse (����������)" #~ msgid "Microsoft compatible (serial)" #~ msgstr "Microsoft ������i��� (����������)" #~ msgid "Kensington Thinking Mouse (serial)" #~ msgstr "Kensington Thinking Mouse (����������)" #~ msgid "" #~ "I need to configure your network adapter to be able to connect to internet." #~ msgstr "" #~ "��������� ������i�������� ���� �������� �����, ��� ������� ���� ��������� �� " #~ "I�������." #~ msgid "" #~ "Please choose which network adaptater do you want to use to connect to " #~ "internet.\n" #~ "If you don't know, choose eth0.\n" #~ msgstr "" #~ "���i �����, �������� ������� �������, ��i �� ������� ������������� �� " #~ "��������� �� I�������.\n" #~ "���i �� �������, �������� eth0.\n" #~ msgid "CHAP" #~ msgstr "CHAP" #~ msgid "Socket" #~ msgstr "�����" #~ msgid "" #~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n" #~ "By default, the 4.0 server is used unless your card is not supported.\n" #~ "\n" #~ "Do you want to keep XFree 3.3?" #~ msgstr "" #~ "DrakX �������� ����i���������� ����� ��� XFree 3.3 i XFree 4.0.\n" #~ "�� ��������� ��������������� ������ 4.0. ���i ���� �i�������� ��\n" #~ "��������i������ i�, ���� ����� ����������� ������ 3.3.\n" #~ "�i �������� �� ���i���� XFree 3.3 � �i�����?" #~ msgid "Cryptographic" #~ msgstr "����������i�" #~ msgid "Configure LAN" #~ msgstr "��������� ����i (���)" #~ msgid "End configuration" #~ msgstr "���������� ��������i" #~ msgid "Do not set up networking" #~ msgstr "�� ����븢���� �����" #~ msgid "Do you want to configure a local network for your system?" #~ msgstr "�i ������� �� ������i�� �������� ����i������� ����� �i�����?" #~ msgid "Show less" #~ msgstr "�������� �����" #~ msgid "Show more" #~ msgstr "�������� �����" #~ msgid "Take over the hard drive" #~ msgstr "������������� ��� �������� ��������" #~ msgid "URI for Local printer" #~ msgstr "URI ��� ���������� ��������" #~ msgid "Local Printer Device (URI)" #~ msgstr "�������� ������� (URI)" #~ msgid "" #~ "What URI device is your printer connected to\n" #~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?" #~ msgstr "" #~ "�� ����� ����� �������� ��� ������� \n" #~ "(/dev/lp0 ���i�������� LPT1:)?\n" #~ msgid "curly" #~ msgstr "��������" #~ msgid "default" #~ msgstr "�� ���������" #~ msgid "tie" #~ msgstr "��������" #~ msgid "brunette" #~ msgstr "������" #~ msgid "girl" #~ msgstr "��������" #~ msgid "woman-blond" #~ msgstr "�������-������i���" #~ msgid "automagic" #~ msgstr "������i���" #~ msgid "Network:" #~ msgstr "�����:" #~ msgid "Everything configured!" #~ msgstr "�� �����i��������!" #~ msgid "What is your keyboard layout?" #~ msgstr "��i ��� ����� ����i�����?" #~ msgid "Normal" #~ msgstr "��������" #~ msgid "Configure my card" #~ msgstr "����i�������� ��� �����" #~ msgid "pptp alcatel" #~ msgstr "pptp alcatel" #~ msgid "Try to find PCMCIA cards?" #~ msgstr "������������ ������i ����� PCMCIA?" #~ msgid "Try to find %s devices?" #~ msgstr "������������ ������i %s �������?" #~ msgid "Small(%dMB)" #~ msgstr "���� (%dM�)" #~ msgid "Modem Configuration" #~ msgstr "��������� ������" #~ msgid "" #~ "Do you want to configure a dialup connection with modem for your system?" #~ msgstr "�i ������� �� ������i�� ����������� �������� ���� ����� �� �i�����?" #~ msgid "Do you want to configure a ISDN connection for your system?" #~ msgstr "�i ������� �� ������i�� ISDN �������� � ����� �i�����?" #~ msgid "Try to find PCI devices?" #~ msgstr "������������ ������i PCI �������?" #~ msgid "Searching root partition." #~ msgstr "����� ���������� �������." #~ msgid "%s: This is not a root partition, please select another one." #~ msgstr "%s: ���� �� �������� �������, ���i ����� �������� i���." #~ msgid "No root partition found" #~ msgstr "�������� ������� �� ���������" #~ msgid "Can't use broadcast with no NIS domain" #~ msgstr "��������� ������������� broadcast ��� ������ NIS" #~ msgid "Please choose a partition to use as your root partition." #~ msgstr "��i ������� ����� ������� ������������� � �����i ����������?" #~ msgid "You don't have any windows partitions!" #~ msgstr "�� �� ����� ��i��i� Windows ��������!" #~ msgid "You don't have any enough room for Lnx4win" #~ msgstr "� ��� �� ����� ����� ��� Lnx4win" #~ msgid ", %U MB" #~ msgstr ", %U MB" #~ msgid "Automated" #~ msgstr "�����������" #~ msgid "SILO main options" #~ msgstr "������� ����i SILO" #~ msgid "" #~ "Here are the following entries in SILO.\n" #~ "You can add some more or change the existing ones." #~ msgstr "" #~ "SILO ������� ��������� ������.\n" #~ "�� ������ ������ ����, ����� ����i�� i�������." #~ msgid "This label is already in use" #~ msgstr "����� ����� ��� ���������������" #~ msgid "Installation of SILO failed. The following error occured:" #~ msgstr "����븢�� SILO �� ����������. ���i��� ��������� �������:" #~ msgid "" #~ "DrakX will attempt at first to look for one or more PCI\n" #~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" #~ "to use, it will insert it (them) automatically.\n" #~ "\n" #~ "\n" #~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" #~ "doesn't know which driver to use for this card, or if you have no\n" #~ "SCSI adapters at all, you will then be prompted on whether you have\n" #~ "one or not. If you have none, answer \"No\". If you have one or more,\n" #~ "answer \"Yes\". A list of drivers will then pop up, from which you\n" #~ "will have to select one.\n" #~ "\n" #~ "\n" #~ "After you have selected the driver, DrakX will ask if you\n" #~ "want to specify options for it. First, try and let the driver\n" #~ "probe for the hardware: it usually works fine.\n" #~ "\n" #~ "\n" #~ "If not, do not forget the information on your hardware that you\n" #~ "could get from your documentation or from Windows (if you have it\n" #~ "on your system), as suggested by the installation guide. These\n" #~ "are the options you will need to provide to the driver." #~ msgstr "" #~ "DrakX �������� ��������� �����i ���i� �i �������i �������� PCI\n" #~ "i SCSI. ���i ������� ��������, i DrakX ������, ��i �������\n" #~ "��� ��� ��������, ����� ������� ����� �������� ����������.\n" #~ "\n" #~ "���i �� ����� SCSI ������� �� ISA-, ����� PCI-�����, ��� DrakX �� �����\n" #~ "��i ������� ���������� � ����� ������, �i DrakX ������, ��� �� �� �����\n" #~ "SCSI �������� �������, � ��� ���������, �i ���� �� � ��� ����� ��.\n" #~ "���i � ��� ��� ����, ���������� \"��\". ���i ���� ���i� �i �������i,\n" #~ "���������� \"���\". ����� ������ �'��i��� ��i� ��������, � ��i� ���\n" #~ "�������� ����� ������� �����������.\n" #~ "\n" #~ "����� ������ ��������, DrakX �������, �i �� ������� �� ������\n" #~ "��� ��� ���������� ��������i. �������� ����� ������� ��������� " #~ "������������:\n" #~ "�������� �� ������ �����.\n" #~ "\n" #~ "� ���������� �������, �� ��������� ��� i��������� �� �����������i, ����\n" #~ "����� �������� �� Windows (���i ��� �������i��� � ����� �i�����), � �������\n" #~ "��� ��������i� �� �������� ����� �������. ��� ��������� ��� ��������i, " #~ "��i�\n" #~ "��������� ������ ��������." #~ msgid "Shutting down" #~ msgstr "���������� ����'�����" #~ msgid "After %s partition %s," #~ msgstr "����� %s �������� %s," #~ msgid "Size: %s MB" #~ msgstr "�����: %s M�" #~ msgid "changing type of" #~ msgstr "�������� ����" #~ msgid "formatting" #~ msgstr "������i�������" #~ msgid "" #~ "Choose \"Install\" if there are no previous versions of Linux\n" #~ "installed, or if you wish to use multiple distributions or versions.\n" #~ "\n" #~ "\n" #~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n" #~ "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n" #~ "(Helios) or Gold 2000." #~ msgstr "" #~ "�������� \"����븢��\", ���i ���� ����������� ����� ����i� Linux,\n" #~ "����� ���i ������� ������������� �������i ������������ ����� ����i�.\n" #~ "\n" #~ "\n" #~ "�������� \"�����i��\" ���i �� ������� �����i�� ���������� ����i�\n" #~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n" #~ "6.1 (Helios) ����� Gold 2000." #~ msgid "" #~ "Select:\n" #~ "\n" #~ " - Recommended: If you have never installed Linux before.\n" #~ "\n" #~ "\n" #~ " - Customized: If you are familiar with Linux, you will be able to \n" #~ "select the usage for the installed system between normal, development or\n" #~ "server. Choose \"Normal\" for a general purpose installation of your\n" #~ "computer. You may choose \"Development\" if you will be using the computer\n" #~ "primarily for software development, or choose \"Server\" if you wish to\n" #~ "install a general purpose server (for mail, printing...).\n" #~ "\n" #~ "\n" #~ " - Expert: If you are fluent with GNU/Linux and want to perform\n" #~ "a highly customized installation, this Install Class is for you. You will\n" #~ "be able to select the usage of your installed system as for \"Customized\"." #~ msgstr "" #~ "��������:\n" #~ "\n" #~ " - �������������: ���i �� ����� �i���i �� ����븢���i Linux.\n" #~ "\n" #~ " - �� ������: ���i �� ����� � Linux, �� ����� ������� ��������� \n" #~ "������� ������������ �i�����: ���������, ��� �������������, �����\n" #~ "������. �������� \"��������\" ��� �������i �i����� ��������� �����������.\n" #~ "����� \"��� ���������i\" ���������� ��� ���, ��� ������������ ����'����\n" #~ "�����i�� ��� ���������i �������. ���i �� ������� ���������� ������ " #~ "���������\n" #~ "����������� (��� �����, �����, ...), �� �������� \"������\".\n" #~ "\n" #~ "\n" #~ " - �������: ���i �� �������� ��������� GNU/Linux i ������� �������i\n" #~ "����븢�� � ������������ ����������, ���� ���� �������i - ��� ���. �� \n" #~ "������� ������� ������� ����������� �i�����, �� � �������� \"�� ������\"." #~ msgid "" #~ "You may now select the packages you wish to install.\n" #~ "\n" #~ "\n" #~ "First you can select group of package to install or upgrade. After that\n" #~ "you can select more packages according to the total size you wish to\n" #~ "select.\n" #~ "\n" #~ "\n" #~ "If you are in expert mode, you can select packages individually.\n" #~ "Please note that some packages require the installation of others.\n" #~ "These are referred to as package dependencies. The packages you select,\n" #~ "and the packages they require will be automatically selected for\n" #~ "install. It is impossible to install a package without installing all\n" #~ "of its dependencies." #~ msgstr "" #~ "����� ����� ������� ������ �������, ��i� �� ������� ����������.\n" #~ "\n" #~ "\n" #~ "��-������, �� ������ ������� ����� ������ ��� ���������� �i �����i��. " #~ "�����\n" #~ "�� ������ ��������� ����� ������ � �����������i � �������� �������, ��i\n" #~ "�� ������� �������.\n" #~ "\n" #~ "\n" #~ "���i �� �������� � ������ ��������, �� ������ ����� ���i���� i����i�������.\n" #~ "����� �� �����, ��� ��������� ������ ���������� ����븢�i i���� ������.\n" #~ "���� ��������� ����������� ������. ������, ��i� �� ������i, i ������,\n" #~ "�� ��i� ��i ��������, ������ ���������� ������� ��� ����븢�i.\n" #~ "��������� ���������� ����� �� ����븢�i ��i� ������, �� ��i� �� ��������.\n" #~ "\n" #~ "\n" #~ msgid "Help" #~ msgstr "��������" #~ msgid "" #~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n" #~ "Normally they are correctly detected during installation. If you don't\n" #~ "see yours detected, you can add one or more now.\n" #~ "\n" #~ "\n" #~ "If you don't want that everybody could access at one of them, you can " #~ "remove\n" #~ "it now (a boot disk will be needed to boot it)." #~ msgstr "" #~ "LILO (LInux LOader) ���� ��������� Linux i i���� ����������� �i�����.\n" #~ "�������� ��� �������� ����������� ��� ��������. ���i �� �� ������i\n" #~ "��� �i����, ��i� ���i ���������� �� ������, �� ������ ������ �����\n" #~ "���� � i� ����� �������i.\n" #~ "\n" #~ "\n" #~ "���i �� �� �������, ��� ��� ���i ������ �� ����� � i�, ����i�� �� �����\n" #~ "(��� �� �������i ����������� ���������� ����)." #~ msgid "Setup SCSI" #~ msgstr "��������� SCSI" #~ msgid "Choose install or upgrade" #~ msgstr "�������� ����븢�� �i ���������" #~ msgid "beginner" #~ msgstr "���������" #~ msgid "developer" #~ msgstr "������������" #~ msgid "expert" #~ msgstr "�������" #~ msgid "server" #~ msgstr "������" #~ msgid "Bad kickstart file %s (failed %s)" #~ msgstr "������ �������� (kickstart) ���� %s (������� %s)" #~ msgid "Going to install %d MB. You can choose to install more programs" #~ msgstr "����� ���������� %d M�. ����� ������� ����� ������� ��� ����븢�i." #~ msgid "What usage do you want?" #~ msgstr "���� ������������ ���i�����?" #~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB" #~ msgstr "������� ������ ������: %dM� �� ����i�� � %dM�" #~ msgid "Local LAN" #~ msgstr "��������� �����" #~ msgid "Which packages do you want to install" #~ msgstr "����� ������ ��� ����븢�i" #~ msgid "Downloading cryptographic packages" #~ msgstr "�������� ����������i���� ������" #~ msgid "Linear (needed for some SCSI drives)" #~ msgstr "�i����� (��������� ��� ��������� �������� SCSI)" #~ msgid "linear" #~ msgstr "�i�����" #~ msgid "" #~ "Linux does not yet fully support ultra dma 66 HPT.\n" #~ "As a work-around i can make a custom floppy giving access the hard drive on " #~ "ide2 and ide3" #~ msgstr "" #~ "Linux ������ ���� �� ���i� ��������i��� ultra dma 66 HPT.\n" #~ "�� �������, ���� �������� �������, ���� ����������� ������ �� ����� �� ide2 " #~ "i ide3" #~ msgid "" #~ "Enter a floppy to create an HTP enabled boot\n" #~ "(all data on floppy will be lost)" #~ msgstr "" #~ "������ ������� ��� ���i�� ���������� � HTP\n" #~ "(��� �������� �� ����� ������� ��i�����)" #~ msgid "It is necessary to restart installation booting on the floppy" #~ msgstr "��������� ����������i�� ����븢�� i ������i��� � �������" #~ msgid "It is necessary to restart installation with the new parameters" #~ msgstr "��������� ����������i�� ����븢�� � �����i ����������i" #~ msgid "" #~ "Failed to create an HTP boot floppy.\n" #~ "You may have to restart installation and give ``%s'' at the prompt" #~ msgstr "" #~ "�� ���������� �������� ����. ������� � HTP.\n" #~ "�������, �������� ����������i�� ����븢�� � ``%s'' � ���������i" #~ msgid "Password:" #~ msgstr "������:" #~ msgid "User name:" #~ msgstr "I�� ����������i��:"