# SOME DESCRIPTIVE TITLE. # Copyright (C) 1999 MandrakeSoft. # Alexander Bokovoy , 2000 # Maryia Davidouskaia , 2000 msgid "" msgstr "" "Project-Id-Version: DrakX VERSION\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: 2000-09-24 12:30 +0100\n" "Last-Translator: Alexander Bokovoy \n" "Language-Team: be\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " "0/1 for Local Config...\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Differential backups only save files that have changed or are new since the " "original 'base' backup." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "network printer port" msgstr "Сеткавы прынтэр (TCP/Socket)" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Please insert floppy disk:" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "PCMCIA" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "Таблiца размяшчэння рэзервовага дыску мае iншы памер\n" "Працягваць далей?" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Which username" msgstr "Iмя карыстальнiку:" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "Якi тып пункта жадаеце дадаць?" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Restore partition table" msgstr "Дадатковая таблiца раздзелаў" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure hostname..." msgstr "Настройка мышы" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "On CUPS server \"%s\"" msgstr "IP сервера SMB" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "Настройка пасля ўсталявання" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "Выкарыстоўвайце ``%s'' замест" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "Тып" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "Шры Ланка" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "Цэнтральная Афрыканская Рэспубліка" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "Прылада-шлюз" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Advanced preferences" msgstr "Заканчэнне настройкi" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Ethernetcard" msgstr "цiкава" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "no" msgstr "Iнфармацыя" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Auto-detect" msgstr "Аддалены прынтэр" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "Клас усталявання" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" "\n" "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Belarus" msgstr "Беларускі" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "Памылка запiсу ў файл %s" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" "ampd выкарыстоўваецца для адслежвання статусу батарэi i вядзення " "статыстыкi.\n" "Яго можна выкарыстоўваць для выключэння машыны пры нiзкiм зарадзе батарэi." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use tape to backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "Наступныя пакеты будуць даданы да сiстэмы" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS configuration" msgstr "Настройка" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Total progress" msgstr "Праверка партоў" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "Пераносім" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "yes" msgstr "Так" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "Лібанон" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "MM HitTablet" #: ../../services.pm:1 #, fuzzy, c-format msgid "Stop" msgstr "Сектар" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Edit selected host" msgstr "Выдалiць чаргу друку" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No CD device defined!" msgstr "Абярыце файл" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Please enter the name of the interface connected to the " "internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "\tUse .backupignore files\n" msgstr "Дрэнны файл рэзервовай копii" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (phonetic)" msgstr "Армянскi (фанетычны)" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "256 Кб" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Don't rewind tape after backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "Галоўныя опцыi пачатковага загрузчыку" #: ../../standalone.pm:1 #, c-format msgid "" "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" "usbtable] [--dynamic=dev]" msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Tape" msgstr "Тып: " #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "Малазыя" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Scanning network..." msgstr "Якi тып вашага ISDN злучэння?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakedm:1 #, fuzzy, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "Выбар пакетаў для ўсталявання" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "Швейцарскi (Французская раскладка)" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "mkraid не працаздольны (можа raid прылады адсутнiчаюць?)" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "Жнівень" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "FTP server" msgstr "NIS сервер:" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Soundcard" msgstr "Стандартны" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "Месяц" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Search for files to restore" msgstr "калi ласка, пазначце тып вашай мышы." #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "Люксембург" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Level %s\n" msgstr "Узровень %s\n" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Syriac (phonetic)" msgstr "Армянскi (фанетычны)" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iran" msgstr "Iранскi" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "Прац." #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "connecting to %s ..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../standalone/drakgw:1 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "Патэнцыйны адрас ЛВС канфлiктуе з бягучай канфiгурацыяй %s!\n" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Configuring..." msgstr "Настройка IDE" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed." msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "Паўтарыце пароль" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Default desktop" msgstr "Па дамаўленню" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will " "be \n" "transferred to that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "Венэсуэла" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "IP адрас" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "Выбар памераў" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose another partition" msgstr "Стварэнне новага раздзелу" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Current user" msgstr "Прыняць карыстальнiка" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username" msgstr "Iмя карыстальнiку:" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "Гайяна" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Server Configuration" msgstr "Заканчэнне настройкi" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Name" msgstr "Iмя чаргi друку" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Remove a module" msgstr "Адваротны парадак старонак" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "Пароль" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Advanced Configuration" msgstr "Заканчэнне настройкi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../any.pm:1 #, c-format msgid "Root" msgstr "Root" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "Абярыце iснуючы RAID для дадання" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "Турэцкi (сучасная \"Q\" мадэль)" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Failed..." msgstr "Аднаўленне з файлу" #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Default user" msgstr "Лакальны прынтэр" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Current interface configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " "card.\n" msgstr "" "\n" "Калi вы маеце ISA карту, велiчынi на наступным экране павiнны быць " "сапраўднымi.\n" "\n" "Калi вы маеце PCMCIA карту, вы павiнны ведаць irq i io вашай карты.\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do not print any test page" msgstr "Друк тэставых старонак" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s already in use\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "[keyboard]" msgstr "Клавiятура" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "FTP proxy" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Install List" msgstr "Усталяванне сiстэмы" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Change\n" "Restore Path" msgstr "Аднаўленне з файлу" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tLimit disk usage to %s MB\n" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "512 Кб" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "Якi тып карты вы маеце?" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, fuzzy, c-format msgid "Security" msgstr "кучаравы" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an " "icon on the desktop, labeled with \"STOP Printer!\", which stops all print " "jobs immediately when you click it. This is for example useful for paper " "jams.\n" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "Q" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Unable to find backups to restore...\n" msgstr "Калi ласка, абярыце мову для карыстання." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown" msgstr "Агульны" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This server is already in the list, it cannot be added again.\n" msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "Канфiгурацыя сеткi" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" "Падключэнне \n" " не праз D-канал (вылучаныя каналы)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with " "the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " "the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the " "disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where " "mkinitrd-net\n" " \tputs its images." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Notice" msgstr "гальштук" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The configuration of the printer will work fully automatically. If your " "printer was not correctly detected or if you prefer a customized printer " "configuration, turn on \"Manual configuration\"." msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "What type of partitioning?" msgstr "Якi тып друкаркi вы маеце?" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Interface" msgstr "Сеткавы iнтэрфейс" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Multisession CD" msgstr "Мультымедыя - гук" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "comma separated strings" msgstr "Фарматаванне раздзелаў" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Messages" msgstr "Праверка партоў" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "POP and IMAP Server" msgstr "сервер" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Mexico" msgstr "Порт мышы" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model stepping" msgstr "фарматаванне" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "Руанда" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "Щвэйцарыя" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "Брунэі Дурасалям" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "Цi ёсць у вас %s iнтэрфейс?" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "You must be root to read configuration file. \n" msgstr "Канфiгурацыя сеткi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "Опцыi аддаленага прынтэру lpd" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure Internet Access..." msgstr "Настройка службаў" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the time interval between each backup" msgstr "Выбар пакетаў для ўсталявання" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Norway" msgstr "Нарвежскi" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Delete profile" msgstr "Абярыце файл" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "Дацкi" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" "Калi ласка, увядзiце IP канфiгурацыю для вашай машыны.\n" "Кожны пункт павiнен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n" "натацыi (напрыклад, 1.2.3.4)." #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Bulgaria" msgstr "Мадьярскi" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "Аўторак" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No NIC selected!" msgstr "Размеркаванне" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't " "work, you might want to relaunch the configuration." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Other files..." msgstr "Дрэнны файл рэзервовай копii" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "IP сервера SMB" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "Таблiца размяшчэння прылады %s будзе запiсана на дыск!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing HPOJ package..." msgstr "Усталяванне пакету %s" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "З дапамогай загрузачнага дыску вы зможаце загружаць Linux таксама як i \n" "стандартным загрузчыкам. Гэта можа быць якасна, калi вы не жадаеце \n" "ўсталёўваць LILO (цi Grub), калi iншая аперацыйная сiстэма выдаляе LILO,\n" "цi LILO не можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама " "можа\n" "быць выкарыстаны сумесна з рамонтнай дыскетай Mandrake Linux, якая вельмi \n" "палегчыць выратаванне сiстэмы пасля збою.\n" "\n" "Жадаеце стварыць загрузачны дыск зараз?\n" "%s" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Latvian" msgstr "Размеркаванне" #: ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Retry" msgstr "Аднаўленне з файлу" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Module name" msgstr "Опцыi модулю:" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Start at boot" msgstr "Стварыць загр. дыск" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "Першы сектар прылады (MBR)" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "Эль Сальвадор" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Is your hardware clock set to GMT?" msgstr "Ваш сiстэмны гадзiннiк усталяваны на GMT?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "Паспрабуем выратаваць таблiцу раздзелаў" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For backups to other media, files are still created on the hard drive, then " "moved to the other media. Enabling this option will remove the hard drive " "tar files after the backup." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Unable to start live upgrade !!!\n" msgstr "Немагчыма запусціць live upgrade !!!\n" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "Iмя: " #: ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "16 мiльёнаў колераў (24 бiты)" #: ../../any.pm:1 #, fuzzy, c-format msgid "Allow all users" msgstr "Дадаць карыстальнiка" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "Змяненне памераў" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Cable connection" msgstr "Злучэнне прынтэру" #: ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, fuzzy, c-format msgid "User" msgstr "Iмя карыстальнiку:" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "mkraid не працаздольны" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Name" msgstr "Iмя: " #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files..." msgstr "Захаванне ў файл" #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "Iўрыт (фанетычны)" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must choose/enter a printer/device!" msgstr "URI прынтэру" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "Нумар тэлефону" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer name, description, location" msgstr "Злучэнне прынтэру" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "Вiртуальная файлавая сiстэма (loopback)" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "West Europe" msgstr "Еўропа" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Harddrake2 version %s" msgstr "Вызначэнне жорсткага дыску" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Preferences" msgstr "Параметры: " #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "Швазіланд" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "Дамініканская Рэспубліка" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Choose color" msgstr "Абярыце манiтор" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Syriac" msgstr "паслядоўная" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" "Абярыце жорскі дыск які жадаеце ачысціць для ўсталявання\n" "новага раздзелу Mandrake Linux. Будзце ўважлівыя, усе дадзеныя на дыску " "будуць\n" " знішчаны і іх немагчыма будзе аднавіць." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted." #: ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "Звычайная мыш з 2 кнопкамі" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: ../../lvm.pm:1 #, c-format msgid "Remove the logical volumes first\n" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "The highlighted entry will be booted automatically in %d seconds." #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "Друк тэставых старонак" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "Ужо ёсць раздзел з пунктам манцiравання %s\n" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" "У гэтым пункце, вы павінны абраць дзе на вашым жорскім \n" "дыску усталяваць аперацыйную сістэму Mandrake Linux. Калі дыск пусты\n" "альбо ўсталываная аперацыйная аперацыйная сістэма выкарыстоўвае ўсю\n" "дыскавую прастору, вы павінны разьбіць яго на раздзелы. У асноўным,\n" "разбіццё раздзелаў жорскага дыску складаецца з лагічнага дзялення яго\n" "дыскавай прасторы дзеля ўсталявання вашай новай сістэмы Mandrake Linux.\n" "\n" "Таму як вынікі разбіцця раздзелаў звычайна незваротныя, гэты працэс \n" "можа быць пужаючым і напружаным, калі вы невопытны карыстальнік. Гэты\n" "майстар спрашчае гэты працэс. Перад тым як пачаць звярніцеся, калі\n" "ласка, да даведкі.\n" "\n" "Вам патрэбна, сама мала, два раздзелы. Першы непасрэдна для аперацыйнай\n" "сістэмы, і другі для віртуальнай памяці (Swap - раздзел).\n" "\n" "Калі раздзелы ўжо вызначаны (у папярэдняе ўсталяванне ці іншым \n" "інструмантам вызначэння раздзелаў), вы павінны абраць тыя, якія жадаеце\n" "выкарыстоўваць для ўсталявання сістэмы.\n" "\n" "\n" "Калі раздзелы не былі вызначаны, вы павінны іх стварыць. Каб зрабіць \n" "гэта, скарыстайце майстра, даступнага вышэй. У залежнасці ад \n" "канфігурацыі жорсткага дыску, могжа быць зроблена наступнае:\n" "\n" "* Выкарыстанне існуючага раздзелу: майстар знайшоў адзін ці некалькі.\n" "існуючых раздзелаў на вашым жорскім дыску. Калі вы жадаеце іх захаваць,\n" "абярыце гетую опцыю.\n" "\n" "\n" "* Поўная ачыстка дыску: абярыце гэта, калі вы жадаеце выдаліць уседадзеныя і " "раздзелы якія існуюць\n" " на вашым дыску і замяніць на Mandrake Linux. Будзце уважлівы з гэтайопцыяй, " "бо гэты працэс незваротны.\n" "\n" "\n" "* Выкарыстанне вольнай прасторы на раздзеле Windows: калі MicrosoftWindows " "усталявана на вашым жорскім\n" " дыску і выкарыстоўвае ўсю даступную прастору, вы павінны стварыцьвольную " "прастору для дадзеных Linux\n" "Каб зрабіць гэта, вы можаце выдаляць ваш раздзел Windows і дадзеныя(гл." "\"Ачыстка усяго дыску\" альбо\n" " \"Рэжым эксперту\") альбо змяніць памеры вашага раздзелу WindowsЗмяненне " "памераў можа быць выканана\n" " без страты дадзеных. Гэтая опцыя рэкамендуецца, калі вы " "жадаецевыкарыстоўваць Mandrake Linux і\n" " Microsoft Windows на адным і тым жа камп'ютэры.\n" "\n" " Перад выбарам гэтага, калі ласка, зьвярніце ўвагу, на тое, штоколькасьць " "даступнай вольнай\n" " прасторы пад Microsoft Windows зменшыцца.\n" "\n" "\n" "* Рэжым эксперту: вы можаце абраць гэтую опцыю, калі вы жадаецеразбіць " "раздзелы уласна рукамі.\n" " Будзце ўважлівыя абіраючы гэта. Гэтая опцыя магутная але даволінебяспечная, " "вы можаце\n" " лёгка згубіць свае дадзеныя. Таму не абірайце гэтую опцыю калі выне ведаеце " "што робіце." #: ../../lang.pm:1 #, fuzzy, c-format msgid "Ukraine" msgstr "Украiнскi" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Application:" msgstr "Размеркаванне" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "External ISDN modem" msgstr "Унутраная ISDN карта" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "Ваш выбар? (змоўчанне %s) " #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" msgstr "" "Тэставыя старонкi адпраўлены дэману друку.\n" "Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n" "Статус друку:\n" "%s\n" "\n" "Ён працуе нармальна?" #: ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and one unknown printer" msgstr "Iмя друкаркi" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Ireland" msgstr "Iсландскi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Restore Configuration " msgstr "Канфiгурацыя сеткi" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Is this the correct setting?" msgstr "Гэта дакладна?" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Wizard Configuration" msgstr "Настройка" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "Аўтапошук" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing printer \"%s\"..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "drakfloppy" msgstr "Аднаўленне з дыскеты" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" msgstr "" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on other machines" msgstr "Настройка службаў" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "Перу" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " on device: %s" msgstr "Мыш: %s\n" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "Выдалiць Windows(TM)" #: ../../services.pm:1 #, fuzzy, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "Запускае i прыпыняе X Font Server пры загрузцы i выключэннi." #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "Мадагаскар" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "System" msgstr "Mouse Systems" #: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format msgid "Do you want to use this feature?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "\n" "- Options:\n" msgstr "Опцыi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Password required" msgstr "Пароль" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "%d хвiлiн" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "Вiдэакарта: %s" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "Настройка XFree" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "Абярыце дзеянне" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "Француская Палінэзыя" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Files or wildcards listed in a .backupignore file at the top of a directory " "tree will not be backed up." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "Усталяванне драйверу для %s карты %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Enable Server" msgstr "Сервер друку" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "Украiнскi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " "printer again." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local network(s)" msgstr "сеткавая карта не знойдзена" #: ../../help.pm:1 #, fuzzy, c-format msgid "Remove Windows" msgstr "Выдалiць Windows(TM)" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the " "applications menu." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" "LILO (ад LInux LOader) i Grub - гэта загрузчыкi. Яны могуць загрузiць " "другую\n" "GNU/Linux цi любую iншую аперацыйную сiстэму, усталяваную на кампутары.\n" "Звычайна, гэтыя iншыя аперацыйныя сiстэмы карэктна вызначаюцца i\n" "ўсталёўваюцца. Калi гэта не атрымалася, то вы можаце дадаць любы запiс\n" "самастойна. Будзьце ўпэўнены, што вы задалi карэктныя параметры.\n" "\n" "\n" "Таксама вы можаце пажадаць i не дабаўляць iншыя аперацыйныя сiстэмы.\n" "У такiм выпадку патрэбна выдалiць адпаведныя запiсы. Але ж тады вам \n" "патрэбна будзе загрузачная дыскета, каб загрузiцца!" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " "print queue name for the printer you wish to access and any applicable user " "name and password." msgstr "" "Для друку на прынтэры NetWare неабходна пазначыць iмя серверу друку NetWare " "(не заўсёды супадае з iменем у сетцы TCP/IP) i iмя чаргi друку, якая " "адпавядае абранаму прынтэру, а таксама iмя карыстальнiку i пароль." #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Netmask:" msgstr "Маска сеткi" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "" #: ../../any.pm:1 #, c-format msgid "Append" msgstr "Далучыць" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically " "made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" " "as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, " "but then you have to take care of these points." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network printer \"%s\", port %s" msgstr "Сеткавы прынтэр (TCP/Socket)" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" "Калi ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да " "вашай лакальнай сеткi." #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your keyboard layout." msgstr "Калi ласка, абярыце тып клавiятуры." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "URI прынтэру" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "на аснове тэрмiналу" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "The user name is too long" msgstr "Гэта iмя карыстальнiку ўжо дададзена" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "Iншая АС (windows...)" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Reading printer database..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Generate auto install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Somalia" msgstr "NIS Domain" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "Прымаюцца ўласцiвасцi 4 узроўня, але зараз сiстэма поўнасцю зачынена.\n" "Параметры бяспекi ўстаноўлены на максiмум." #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "Нікарагуа" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "Новая Калядонія" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol (EDSS1)" msgstr "Еўропа (EDSS1)" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "/_Выдаліць" #: ../../any.pm:1 #, c-format msgid "Video mode" msgstr "Вiдэа-рэжым" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Oman" msgstr "NIS Domain" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Please enter your email address below " msgstr "Паспрабуйце яшчэ раз" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Network Monitoring" msgstr "Канфiгурацыя сеткi" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "New size in MB: " msgstr "Памер у Мб:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table type: %s\n" msgstr "Тып таблiцы раздзелаў: %s\n" #: ../../any.pm:1 #, fuzzy, c-format msgid "Authentication Windows Domain" msgstr "Аўтэнтыфiкацыя" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "US клавiятура" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Sending Speed:" msgstr "Захаванне ў файл" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Mail alert configuration" msgstr "Настройка ADSL" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "Такелаў" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bosnian" msgstr "Эстонскi" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Release: " msgstr "Калi ласка, пачакайце" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection speed" msgstr "Iмя злучэння" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "Намібія" #: ../../services.pm:1 #, fuzzy, c-format msgid "Database Server" msgstr "Сервер друку" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "Не атрымлiваецца дадаць раздзел на _адфармацiраваны_ RAID md%d" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Network Time Protocol" msgstr "Сеткавы iнтэрфейс" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %" "s.\n" "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n" "ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша вiдэакарта падтрымлiваецца XFree %s, якi\n" "лепей падтрымлiвае карты з 2D-паскарэннем." #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security options..." msgstr "Падрыхтоўка ўсталяваньня" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "Анцігуа і Барбуда" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "Iспанскi" #: ../../services.pm:1 #, fuzzy, c-format msgid "Start" msgstr "Стартавае меню" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring applications..." msgstr "Настройка прынтэру" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected. Also your network printer(s) and your Windows " "machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "File Selection" msgstr "Выбар групы пакетаў" #: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Erase tape before backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "Усталяванне загрузчыку" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "Каранёвы раздзел ў Mб: " #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмянiць" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or " "a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help " "generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 " "manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve host " "names to IP addresses." msgstr "" "named (BIND) - гэта сервер даменных iмёнаў, якi выкарыстоўваецца для\n" "перакладання iмён вузлоў у IP адрасы." #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "Санта Лючыя" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "Лістапад" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Report" msgstr "Порт" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "Палаў" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "узровень" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "" "All incidents will be followed up by a single qualified MandrakeSoft " "technical expert." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "Выбар групы пакетаў" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "Настройка мадэму" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "Выбар памераў экрану i глыбiнi колеру" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "Эмуляваць трэцюю кнопку?" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "Манцiраванне" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Creating auto install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Install updates" msgstr "Усталяванне сiстэмы" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "State" msgstr "Стартавае меню" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "Даступна шмат профiляў" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "Лакальны прынтэр" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Package selection" msgstr "Выбар групы пакетаў" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "Маўрытанія" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the Network that you use " "for your local network; I will not reconfigure it and I will not touch your " "DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. " "You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server " "for you.\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " "equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " "printer: /dev/usb/lp1, ...)." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "Усе першасныя раздзелы выкарыстаны" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../network/netconnect.pm:1 #, c-format msgid "" "After this is done, we recommend that you restart your X environment to " "avoid any hostname-related problems." msgstr "" #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation Server Configuration" msgstr "Заканчэнне настройкi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "Настройка IDE" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Network functionality not configured" msgstr "Манiтор пакуль не настроены" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Configure module" msgstr "Настройка мышы" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "Какосавыя выспы" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "Каб змяненнi ўступiлi ў дзеянне, необходна перазагрузiцца" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "Нумар тэлефону правайдара" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Host %s" msgstr "Iмя машыны" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Fiji" msgstr "Фiнскi" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Armenia" msgstr "Армянскi (стары)" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "Другi дыскавод" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "Устаўце дыскету ў дыскавод\n" "Усе дадзеныя на гэтай дыскеце будуць страчаны" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "Памер: %s" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "secondary" msgstr "%d секундаў" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Backup Configuration." msgstr "Канфiгурацыя сеткi" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "Няма паролю" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Nigeria" msgstr "паслядоўная" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires hostname...\n" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "Няма iснуючых раздзелаў, якiя можна выкарыстаць" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on parallel port #%s" msgstr "Iмя прынтэру" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " "JetDirect servers the port number is usually 9100, on other servers it can " "vary. See the manual of your hardware." msgstr "" "Каб друкаваць праз сокет друкаркi, вам неабходна забяспечыць\n" "iмя прынтэру i магчыма яго нумар порту." #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hard drive information" msgstr "Iнфармацыя" #: ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "Рускi" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Jordan" msgstr "Iранскi" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Hide files" msgstr "mkraid не працаздольны" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detect printers connected to this machine" msgstr "Аддалены прынтэр" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "Выбачайце, але дыскавод недаступны" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "Балівія" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " "protocol and set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "Дрэнны пакет" #: ../advertising/07-server.pl:1 #, c-format msgid "" "Transform your computer into a powerful Linux server: Web server, mail, " "firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "DrakSec Basic Options" msgstr "Опцыi" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " "program. Just type \"sndconfig\" in a console." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Romania" msgstr "NIS Domain" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Group" msgstr "Працоўная група" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Canada" msgstr "Канадскi (Квебэк)" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "choose device" msgstr "Загрузачная прылада" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "Выдалiць з LVM" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German" msgstr "Нямецкi" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "Далей ->" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Turning on this allows to print plain text files in japanese language. Only " "use this function if you really want to print text in japanese, if it is " "activated you cannot print accentuated characters in latin fonts any more " "and you will not be able to adjust the margins, the character size, etc. " "This setting only affects printers defined on this machine. If you want to " "print japanese text on a printer set up on a remote machine, you have to " "activate this function on that remote machine." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "Часціня гарызантальный разгорткi" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit" msgstr "Ext2" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "Нельга ўсталяваць пункт манцiравання, таму што раздел выкарыстоўваецца для\n" "вiртуальнай файлавай сiстэмы.\n" "Спачатку выдалiце вiртуальную сiстэму" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network is accessable after booting your " "system and correct the configuration using the Mandrake Control Center, " "section \"Network & Internet\"/\"Connection\", and afterwards set up the " "printer, also using the Mandrake Control Center, section \"Hardware\"/" "\"Printer\"" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../Xconfig/various.pm:1 #, fuzzy, c-format msgid "What norm is your TV using?" msgstr "Якi тып вашага ISDN злучэння?" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Type:" msgstr "Тып: " #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "Iмя для размеркаванага рэсурсу" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "enable" msgstr "Таблiца" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Remove the loopback file?" msgstr "Фарматаванне вiртуальнага раздзелу %s" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose your country." msgstr "калi ласка, пазначце тып вашай мышы." #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hard Disk Backup files..." msgstr "Дрэнны файл рэзервовай копii" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Laotian" msgstr "Размеркаванне" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "Самоа" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" "Пратакол rstat дазваляе карыстальнiкам сеткi атрымлiваць\n" "памеры нагрузкi для кожнай машыны сеткi." #: ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../modules/interactive.pm:1 #, fuzzy, c-format msgid "Module configuration" msgstr "Настройка" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Scanner" msgstr "Абярыце вiдэакарту" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "Папярэджанне: тэсцiраванне на гэтай вiдэакарце небяспечна" #: ../../any.pm:1 #, c-format msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "Iмя карыстальнiку павiнна змяшчаць лiтары толькi на нiжнiм рэгiстры, \n" "лiчбы, `-' i `_'" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Menudrake" msgstr "абавязкова" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "Сардэчна запрашаем у Crackers" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "Опцыi модулю:" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Go on without configuring the network" msgstr "Настройка сеткi" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "Адмянiць" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "Kensington Thinking Mouse" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Usage of remote scanners" msgstr "Выкарыстоўваць незанятую прастору" #: ../../install_interactive.pm:1 #, c-format msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "Ваш раздзел з Windows занадта фрагментаваны. \n" "Рэкамендуем спачатку запусцiць праграму ``defrag''" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "Dvorak (Нарвежскi)" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Unable to fork: %s" msgstr "Зрабiць неактыўным сеткавае злучэнне" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "Тып: " #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "no fonts found" msgstr "Не знайшлi %s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Mouse" msgstr "Порт мышы" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "Не хапае дыскавай прасторы ў /boot" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "Ліхтэнштайн" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "Iмя машыны" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "Дадаць да RAID" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "No floppy drive available!" msgstr "Дыскавод недаступны" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the " "list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "Савудаўская Арабія" #: ../../services.pm:1 #, fuzzy, c-format msgid "Internet" msgstr "цiкава" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "Сапраўды працягваць?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "Прынтэр" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices were added:\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "Геаметрыя: %s цылiндраў, %s галовак, %s сектараў\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing on the printer \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Tape" msgstr "Дадатковая таблiца раздзелаў" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your " "default browser\n" "to Anthill where you will be able to upload the above information as a bug " "report." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Choose the profile to configure" msgstr "Абярыце асноўнага карыстальнiка:" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now from configuration file" msgstr "Канфiгурацыя сеткi" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting printing system..." msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "Гл. апiсанне абсталявання" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "Дзень" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "Першы сектар загрузачнага раздзелу" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires " "username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, " "nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, " "IP, nbi image name)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "Два крытычных параметры - гэта часціня вертыкальнай разгорткi, цi\n" "часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n" "часціня гарызантальнай сiнхранiзацыi разгорткi, цi часціня вываду\n" "радкоў экрану.\n" "\n" "ВЕЛЬМI ВАЖНА, каб абраны вамi манiтор меў часціню сiнхранiзацыi, якая\n" "не перавышае фактычныя магчымасцi вашага манiтору: у процiлеглым выпадку\n" "вы можаце сапсаваць манiтор.\n" "Калi вы сумняваецеся, абярыце кансерватыўныя настройкi." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Modify" msgstr "Змянiць RAID" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for " "a particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \".\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Insert floppy" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "новы" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Would you like to try again?" msgstr "Жадаеце настроiць прынтэр?" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "Майстар стварэння" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Edit selected server" msgstr "Выдалiць чаргу друку" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose where you want to backup" msgstr "Выбар пакетаў для ўсталявання" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "Каб мадыфiкацыя таблiцы раздзелаў здейснiлася, патрэбна перазагрузка." #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can lose data)" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "Калi ласка, абярыце тып клавiятуры." #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "Стандартны" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "калi ласка, пазначце тып вашай мышы." #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Failed to configure printer \"%s\"!" msgstr "Настройка прынтэру" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "not configured" msgstr "Настройка X Window" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "ISA / PCMCIA" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "About" msgstr "Адмянiць" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "GlidePoint" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "Настройка proxy кэшуючых сервераў" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start: sector %s\n" msgstr "Пачатак: сектар %s\n" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "No Mask" msgstr "Дрэнны пакет" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Network interface already configured" msgstr "Манiтор пакуль не настроены" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, " "the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a " "patent\n" "may be applicable to you, check your local laws." msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Mail Server" msgstr "Сервер друку" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "Націсніце на раздзел" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "Linux" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "/dev/fd0" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Upgrade %s" msgstr "Раздзел %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "Выбар тыпу злучэння прынтэру" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" "Iнтэрнэт суперсервер-дэман (завецца inetd) запускае пры старце \n" "колькасць розных iнтэрнэт службаў, якiя неабходны. Яго можна выкарыстоўваць " "для пуску\n" "шматлікіх службаў, уключаючы telnet, ftp, rsh i rlogin. Блакуючы inetd, " "блакуем\n" "усе службы, за якiя ён адказвае." #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "Аргенціна" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Domain Name Server" msgstr "Iмя дамену" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Level:" msgstr "Настройкi ўзроўня бяспекi" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "Пункт манцiравання павiнен пачынацца з /" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Choose your CD/DVD device" msgstr "Калi ласка, абярыце тып клавiятуры." #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "CUPS server" msgstr "DNS сервер" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Postfix Mail Server" msgstr "Сервер друку" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "Выйсцi без захавання" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "Йемен" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "=> There are many things to choose from (%s).\n" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "Вызначэнне жорсткага дыску" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Please enter the WebDAV server URL" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "Такжыкістан" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "Прыняць" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #: ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "Апiсанне" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "Памылка адкрыцця %s для запiсу: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse type: %s\n" msgstr "Тып мышы: %s\n" #: ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %" "s." #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "Абярыце манiтор" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "Пустая метка не дазваляецца" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "Дадаць раздзел немагчыма" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "Памер у Мб:" #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "Аддалены прынтэр" #: ../../any.pm:1 #, fuzzy, c-format msgid "Please choose a language to use." msgstr "Калi ласка, абярыце мову для карыстання." #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the " "Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" "Можна настроiць сiстэму для аўтаматычнага ўваходу ў сiстэму для\n" "аднаго карыстальнiка. Калi Вы не жадаеце гэтага, нацiснiце \"Адмена\"." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Floppy format" msgstr "Фарматаванне" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Generic Printers" msgstr "Прынтэр" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer to which the print jobs should go or enter a " "device name/file name in the input line" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "First sector of the root partition" msgstr "Першы сектар загрузачнага раздзелу" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Alternative drivers" msgstr "Друк тэставых старонак" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "Initrd" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Cape Verde" msgstr "Згарнуць дрэва" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Loading printer configuration... Please wait" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Guam" msgstr "Забавы" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the port that your printer is connected to or enter a device " "name/file name in the input line" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "Гэты узровень неабходна выкарыстоўваць з асцярогай. Сiстэма будзе прасцей\n" "у карыстаннi, але i больш чутнай: гэты узровень бяспекi нельга " "выкарыстоўваць\n" "на машынах, якiя далучаны да сеткi цi да Internet. Уваход не абаронены " "паролем." #: ../../fs.pm:1 #, fuzzy, c-format msgid "Mounting partition %s" msgstr "Фарматаванне раздзелу %s" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "Iмя карыстальнiку:" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Userdrake" msgstr "Выкарыстоўваць DiskDrake" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "Памеры якога раздзела вы жадаеце змянiць?" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to missing %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Test pages" msgstr "Праверка партоў" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Logical volume name " msgstr "Лакальны прынтэр" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Checking %s" msgstr "Памеры экрану: %s\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "TCP/Socket Printer Options" msgstr "Опцыi сокету прынтэру" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "Адрасы памяці карты (DMA)" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnecting from Internet " msgstr "Далучэнне да Iнтэрнэту" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "Францыя" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name missing!" msgstr "Аддалены вузел" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on printers in the local network?\n" msgstr "Жадаеце пратэсцiраваць друк?" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "Турцыя" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Number of buttons" msgstr "2 кнопкi" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "Вьетнамскi \"нумар радка\" QWERTY" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Module" msgstr "Порт мышы" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "Злучаныя Штаты" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "User umask" msgstr "Iмя карыстальнiку:" #: ../../any.pm:1 #, fuzzy, c-format msgid "Default OS?" msgstr "Па дамаўленню" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "Швейцарскi (Нямецкая раскладка)" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up. The configuration of the " "printer will work fully automatically. If your printer was not correctly " "detected or if you prefer a customized printer configuration, turn on " "\"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "NTP Server" msgstr "NIS сервер:" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Load/Save on floppy" msgstr "Захаванне на дыскету" #: ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "добра" #: ../../Xconfig/test.pm:1 #, fuzzy, c-format msgid "Leaving in %d seconds" msgstr "%d секундаў" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Property" msgstr "Порт" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "LAN Configuration" msgstr "Настройка" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "Гана" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Advanced Options" msgstr "Заканчэнне настройкi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "View Configuration" msgstr "Настройка" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Lexmark inkjet configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "Адкат" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Save partition table" msgstr "Запiс таблiцы раздзелаў" #: ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "Фiнскi" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "Македонія" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "Славенскi" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " "set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow" "(5))." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Libya" msgstr "Лібэрыя" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on parallel port #%s" msgstr "Iмя прынтэру" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "Таблiца" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "Не ведаю як адфарматаваць %s з тыпам %s" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Model" msgstr "Порт мышы" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "USB printer #%s" msgstr "Iмя друкаркi" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Stop Server" msgstr "NIS сервер:" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Modem" msgstr "Порт мышы" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "Тувалю" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" "GPM дадае падтрымку мышы да праграмаў, якiя працуюць у тэкставым рэжыме,\n" "такiх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры " "капiраваннi i ўстаўцы,\n" "i ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме." #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Join the MandrakeSoft support teams and the Linux Community online to share " "your knowledge and help others by becoming a recognized Expert on the online " "technical support website:" msgstr "" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "No password aging for" msgstr "Няма паролю" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "Усходні Тымор" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "On Tape Device" msgstr "Порт прынтэру" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Login name" msgstr "Iмя дамену" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing Foomatic..." msgstr "Усталяванне пакету %s" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "Калi ласка, выйдзiце, а потым скарыстайце Ctrl-Alt-BackSpace" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected" msgstr "Аддалены прынтэр" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "Выбар пакетаў для ўсталявання" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package: " msgstr "Пакет" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "StarOffice" msgstr "добра" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Windows Migration tool" msgstr "Навуковыя прыкладанні" #: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format msgid "All languages" msgstr "Выбар мовы" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removing %s" msgstr "Памеры экрану: %s\n" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "%s not found...\n" msgstr "Не знайшлi %s" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Testing your connection..." msgstr "Якi тып вашага ISDN злучэння?" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cache size" msgstr "памер блоку" #: ../../security/level.pm:1 #, c-format msgid "" "Passwords are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасцi сеткавага\n" "таксама не рэкамендавана." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "Пачатковы сектар:" #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Read" msgstr "Перазагрузiць" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "Выбар пакетаў для ўсталявання" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Seychelles" msgstr "Абалонка:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" "detection with the models listed in its printer database to find the best " "match. This choice can be wrong, especially when your printer is not listed " "at all in the database. So check whether the choice is correct and click " "\"The model is correct\" if so and if not, click \"Select model manually\" " "so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Bad password on %s" msgstr "Няма паролю" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Right Control key" msgstr "Аддалены прынтэр" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "" "Insert a FAT formatted floppy in drive %s with %s in root directory and " "press %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "Замбія" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Romanian (qwerty)" msgstr "Рускi (Я-В-Е-Р-Т-И)" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Egypt" msgstr "Пуста" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "Чэская Рэспубліка" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Sound card" msgstr "Стандартны" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Import Fonts" msgstr "Фарматаванне раздзелаў" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "Зараз вы маеце толькi адзiн вялiкi раздзел FAT\n" "(які звычайна выкарыстоўвае MS Dos/Windows).\n" "Прапаную, па-першае, змянiць памеры раздзела\n" "(клiкнiце на яго, а потым на \"змяненне памераў\")" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "Змянiць тып раздзелу" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Network Options" msgstr "Опцыi модулю:" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../printer/cups.pm:1 #, fuzzy, c-format msgid "(on %s)" msgstr "(модуль %s)" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "MM Series" #: ../../security/level.pm:1 #, c-format msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "New printer name" msgstr "Iмя друкаркi" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the " "file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "Экватарыяльная Гвінэя" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup System" msgstr "Настр. файлавых сiстэмаў" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Build Backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Romanian (qwertz)" msgstr "Рускi (Я-В-Е-Р-Т-И)" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Write Config" msgstr "Настройка X Window" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" "Дэман маршрутызацыi дазваляе дынамiчным таблiцам IP маршрутызацыi\n" "аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n" "складаныя пратаколы маршрутызацыi - у вялiкiх сетках." #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "Кірыбаці" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "Logitech Mouse (паслядоўная, стары тып C7)" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "Прагляд" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "Цi жадаеце зараз паспрабаваць далучыцца да Iнтэрнэту?" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "Бельгiйскi" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you have an ISA sound card?" msgstr "Цi ёсць у вас iншы?" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" "Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, " "скарыстайце канфiгурацыйны iнструмэнт." #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Windows" msgstr "Навуковыя прыкладанні" #: ../../common.pm:1 #, fuzzy, c-format msgid "Can't make screenshots before partitioning" msgstr "Дадаць раздзел немагчыма" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host Name" msgstr "Iмя машыны" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To get access to printers on remote CUPS servers in your local network you " "only need to turn on the \"Automatically find available printers on remote " "machines\" option; the CUPS servers inform your machine automatically about " "their printers. All printers currently known to your machine are listed in " "the \"Remote printers\" section in the main window of Printerdrake. If your " "CUPS server(s) is/are not in your local network, you have to enter the IP " "address(es) and optionally the port number(s) here to get the printer " "information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "Затрымка перад загрузкай вобразу па дамаўленню" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "Абмежаванне опцыяў каманднага радка" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "East Europe" msgstr "Еўропа" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "Выкарыстоўваць незанятую прастору" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "Узбэкістан" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected %s" msgstr "Дубляванне пункту манцiравання %s" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _printers" msgstr "Аддалены прынтэр" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Finish" msgstr "Фiнскi" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "Тога" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "16 Мб" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "Паспрабуйце яшчэ раз" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The model is correct" msgstr "Гэта дакладна?" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "Асабiсты выбар пакетаў" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "This partition is not resizeable" msgstr "Памеры якога раздзела вы жадаеце змянiць?" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "Размеркаванне" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Guatemala" msgstr "Шлюз" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "Journalised FS" msgstr "памылка манцiравання" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "Лiтара для DOS-дыску: %s (наўгад)\n" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "Бахрэйн" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "omit scsi modules" msgstr "Рэжым злучэння" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already " "configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your " "Internet & Network connection.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Keyboard layout: %s\n" msgstr "Тып клавiятуры: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can choose whether the printers connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "The creation of the boot floppy has been successfully completed \n" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" "Манцiраваць i разманцiраваць усе сеткавыя файлавыя сiстэмы (NFS),\n" " SMB (Lan Manager/Windows) i NCP (Netware) пункты манцiравання." #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Toggle between normal/expert mode" msgstr "Звычайны рэжым" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Size" msgstr "Памер: %s" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Greenland" msgstr "Iсландскi" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "Чацьвер" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete All NBIs" msgstr "Абярыце файл" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "Якую канфiгурацыю XFree вы жадаеце атрымаць?" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "More" msgstr "Перанос" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" "scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "На гэтам узроўне бяспекi магчыма выкарыстанне сiстэмы ў якасцi\n" "серверу. Узровень бяспекi дастаткова высокi для работы\n" "серверу, якi дапускае злучэннi са шматлiкiмi клiентамi." #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Server Name" msgstr "сервер" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "Пароль для ўваходу" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "УВАГА!\n" "\n" "DrakX зараз павiнен змянiць памер вашага раздзела Windows.\n" "Будзьце ўважлiвы: гэтая аперацыя небяспечна. Калi вы яшчэ не зрабiлi \n" "рэзервовую копiю дадзеных, то спачатку пакiньце праграму ўсталявання," "выканайце scandisk i defrag на гэтым разделе, зрабiце рэзервовую копiю\n" "дадзеных i толькi потым зноў вярнiцеся да праграмы ўсталявання.\n" "Калi падрыхтавалiся, нацiснiце Ok." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tajik keyboard" msgstr "Тайская клавiятура" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" "s to %s, your current spooler. All the configuration data (printer name, " "description, location, connection type, and default option settings) is " "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Font List" msgstr "Кропка манцiравання" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "Абярыце файл" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose the network or host on which the local printers should be made " "available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "Японія" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print option list" msgstr "Опцыi прынтэру" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Country / Region" msgstr "Памеры экрану" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search servers" msgstr "DNS сервер" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Warning, another internet connection has been detected, maybe using your " "network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom пазначаны \"%s\"" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" "Захаваць i аднавiць сiстэмны энтрапiйны пул для высокай якасцi\n" "генерацыі выпадковых лікаў." #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid " (driver %s)" msgstr "Сервер XFree86: %s\n" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "Файл(ы) вiртуальнай файлавай сiстэмы: %s\n" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "Не вядома" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat " "dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've " "performed on this computer, being interactively prompted for some steps, in " "order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed " "automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Telugu" msgstr "Бельгiйскi" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is " "\"%s\")" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Uninstall" msgstr "Заканчэнне ўсталявання" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connecting to Internet " msgstr "Далучэнне да Iнтэрнэту" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Cpuid level" msgstr "Настройкi ўзроўня бяспекi" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "Сеткавы прынтэр (TCP/Socket)" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Mongolian (cyrillic)" msgstr "Азербайджанскі (кірыліца)" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Add a module" msgstr "Дадаць карыстальнiка" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Local measure" msgstr "Лакальны прынтэр" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "busmouse" msgstr "Няма мышы" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must " "be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a " "graphical \n" " \tinterface to help manage/customize these images. To create the " "file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " "include in \n" " \tdhcpd.conf, you should create the etherboot images for at least " "one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "Iмя для ўваходу (iмя карыстальнiку)" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "Уругвай" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Benin" msgstr "Бельгiйскi" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Path selection" msgstr "Асабiсты выбар пакетаў" #: ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor: %s\n" msgstr "Манiтор: %s\n" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom & system settings" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted " "data." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP missing!" msgstr "Iмя прынтэру" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please check all users that you want to include in your backup." msgstr "Выбар пакетаў для ўсталявання" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware " "section." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Key isn't writable" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "Бангладэш" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "Працягнуць" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Custom Restore" msgstr "Па выбару" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "Субота" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the root umask." msgstr "Пароль для root" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "Памылка чытання файлу %s" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "на аснове скрыпту" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "PLL setting:" msgstr "фарматаванне" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, fuzzy, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "Вы павiнны мець раздзел swap" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " "are supported by all the spoolers." msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "Iншая АС (SunOS,...)" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Install/Upgrade" msgstr "Усталёўка" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "%d пакетаў" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "Коста-Рыка" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X " "users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain Authentication Required" msgstr "Аўтэнтыфiкацыя" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Use libsafe for servers" msgstr "Абярыце дадатковыя настройкi для сервера" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "Iсландскi" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" "testing] [-v|--version] " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../loopback.pm:1 #, c-format msgid "Circular mounts %s\n" msgstr "Манцiраванне дыску %s\n" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Lilo/grub mode" msgstr "Рэжым злучэння" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "Марцінік" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Old user list:\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, fuzzy, c-format msgid "a number" msgstr "Нумар тэлефону" #: ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "Швецкi" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "Якi драйвер %s паспрабаваць?" #: ../../standalone/logdrake:1 #, c-format msgid "" "You will receive an alert if one of the selected services is no longer " "running" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Weekday" msgstr "Серада" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "Тыпы файлавых сiстэмаў:" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "Выспы Паўночнае Мар'яны" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "няма" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Name of the profile to create (the new profile is created as a copy of the " "current one) :" msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Floppy" msgstr "Захаванне на дыскету" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Bootloader" msgstr "Галоўныя опцыi пачатковага загрузчыку" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "Перанос" #: ../../any.pm:1 ../../help.pm:1 #, fuzzy, c-format msgid "Bootloader to use" msgstr "Галоўныя опцыi пачатковага загрузчыку" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "Iмя серверу SMB" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Name Servers:" msgstr "NIS сервер:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Minute" msgstr "Хвіліны" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Expert mode" msgstr "Эксперт" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "Мікранэзыян" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "4 мiлiярда колераў (24 бiты)" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if " "the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured " "security levels\n" "provided with msec. These levels range from poor security and ease of use, " "to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but " "very\n" "easy to use security level. It should only be used for machines not " "connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard " "security\n" "recommended for a computer that will be used to connect to the Internet as " "a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high " "enough\n" "to use the system as a server which can accept connections from many " "clients. If\n" "your machine is only a client on the Internet, you should choose a lower " "level.\n" "\n" "\n" "Paranoid: This is similar to the " "previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "Памылка: для стварэння новых файлавых сiстэмаў не знайдзены адпаведныя \n" "прылады. Праверце абсталяванне для пошуку iмавернай прычыны." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting the printing system at boot time" msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "Польскi (стандартная раскладка)" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Add Printer" msgstr "Прынтэр" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" "s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for " "print jobs and handles them. This daemon is also accessable by remote " "machines through the network and so it is a possible point for attacks. " "Therefore only a few selected daemons are started by default in this " "security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "Гэты раздзел не можа быць выкарыстаны пад вiртуальную файлавую сiстэму" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "Файл ужо iснуе. Выкарыстаць яго?" #: ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "Шлюз" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "Тонга" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "Тунісія" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing" msgstr "Прынтэр" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Profile: " msgstr "памылка манцiравання: " #: ../../standalone/harddrake2:1 #, c-format msgid "" "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "Гэтая метка ўжо выкарыстоўваецца" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection Time: " msgstr "Iмя злучэння" #: ../../standalone/livedrake:1 #, fuzzy, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" "Змянiце ваш Cd-Rom!\n" "\n" "Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк " "пасля.\n" "Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага " "Cd." #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "Абярыце асноўнага карыстальнiка:" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "Габон" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these " "printers will be automatically detected." msgstr "" "Аддалены CUPS сервер не патрабуе ад Вас настройкі прынтэру\n" "на гэтай машыне, ён будзе знойдзены аўтаматычна.\n" "Калі Вы не ўпэўнены, абярыце \"Аддалены сервер CUPS\"." #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання" #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Domain" msgstr "NIS Domain" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "Пазначце дакладны памер RAM (знойдзена %d Mб)" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Provider dns 2 (optional)" msgstr "DNS 2 правайдару" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "Загрузачная прылада" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "Памеры якога раздзела вы жадаеце змянiць?" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "Няістотна блізкія да Злучаных штатаў выспы" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Djibouti" msgstr "Адмянiць" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "detected on port %s" msgstr "Дубляванне пункту манцiравання %s" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics card: %s\n" msgstr "Вiдэакарта: %s\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/Set as _Default" msgstr " (Па дамаўленню)" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "Yaboot" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "Logitech CC Series" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "Пашыраны раздзел не падтрымлiваецца гэтай платформай" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Splash selection" msgstr "Асабiсты выбар пакетаў" #: ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "Настройка ISDN" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "high" msgstr "Высокi" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "Сумеснае Iнтэрнэт-злучэнне" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Summary: " msgstr "Агульныя зьвесткі" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fixes after installation." msgstr "" "Увага! Знойдзена існуючая сiстэма сеткавай бяспекi (firewall). Вам магчыма " "спатрэбіцца скарэктаваць яе пасля ўсталявання." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on " "printers in the local network?\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer default settings" msgstr "Злучэнне прынтэру" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Generic PS2 Wheel Mouse" msgstr "Звычайная мыш з 2 кнопкамі" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the WP flag in the CR0 register of the cpu enforce write proctection at the " "memory page level, thus enabling the processor to prevent unchecked kernel " "accesses to user memory (aka this is a bug guard)" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing old printer \"%s\"..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Select a device !" msgstr "Абярыце вiдэакарту" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected server" msgstr "Выдалiць чаргу друку" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "Паўднёвыя Францускія Тэрыторыі" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless " "client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this " "file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "Усе дадзеныя ў гэтым раздзеле павiнны быць зархiваваныя" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "Усталяванне пакету %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "Каб зрабiць больш разделаў, выдалiце адзiн i стварыце пашыраны раздзел " "(extended)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " "graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " "\"MTools File Manager\") or the command line utilities \"mtools\" (enter " "\"man mtools\" on the command line for more info). You find the card's file " "system under the drive letter \"p:\", or subsequent drive letters when you " "have more than one HP printer with photo card drives. In \"MtoolsFM\" you " "can switch between drive letters with the field at the upper-right corners " "of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "Выбар пакетаў" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "Усе iснуючыя раздзелы на дыску %s i дадзеныя на iх будуць страчаны" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "Ваша сiстэма не мае дастакова месца для ўсталявання цi абнаўлення (%d > %d)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "Бутан" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "Сеткавы iнтэрфейс" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnection from Internet failed." msgstr "Далучэнне да Iнтэрнэту" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Reading printer data..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Korean keyboard" msgstr "UK клавiятура" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Not connected" msgstr "Размеркаванне" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "No internet connection configured" msgstr "Iнтэрнэт злучэнне i канфiгурацыя" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "Грэчаскi" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "Звычайная мыш з 3 кнопкамі" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 16 Мб" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Erase your RW media (1st Session)" msgstr "Націсніце на раздзел" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "Часціня верт.разг. манiтору: %s\n" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "Кропка манцiравання" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "User :" msgstr "Iмя карыстальнiку:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore system" msgstr "Усталяванне сiстэмы" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "These are the machines on which the locally connected scanner(s) should be " "available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Another one" msgstr "цiкава" #: ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "Калюмбія" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Reunion" msgstr "Памеры экрану" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "Падрабязнасцi" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Checking your system..." msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print" msgstr "Прынтэр" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "Манголія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mounted\n" msgstr "Заманцiравана\n" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS" msgstr "Настройка X Window" #: ../../help.pm:1 #, fuzzy, c-format msgid "Graphical Interface" msgstr "Запуск X пры старце сiстэмы" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Users" msgstr "Аднаўленне з файлу" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Encryption key for %s" msgstr "Паролi не супадаюць" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Do you want to recover your system?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" "Portmapper (аглядальнiк партоў) кiруе RPC злучэннямi, якiя звычайна\n" "выкарыстоўваюцца такiмi пратаколамi як NFS i NIS. Portmap сервер павiнен " "выконвацца\n" "на машынах якiя працуюць як серверы для пратаколаў, якiя скарыстоўваюць RPC." #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detected hardware" msgstr "Гл. апiсанне абсталявання" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "Марыціўс" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../fs.pm:1 #, fuzzy, c-format msgid "Enabling swap partition %s" msgstr "Фарматаванне раздзелу %s" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" "Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n" "ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "Армянскi (стары)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "" "Find the solutions of your problems via MandrakeSoft's online support " "platform." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Monaco" msgstr "Манiтор" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "Падрыхтоўка разделаў не ўдалася: %s" #: ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "%s памылка фарматавання %s" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Canada (cable)" msgstr "Канадскi (Квебэк)" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Floppy creation completed" msgstr "Iмя злучэння" #: ../../help.pm:1 #, fuzzy, c-format msgid "Upgrade" msgstr "Раздзел %s" #: ../../help.pm:1 #, fuzzy, c-format msgid "Workstation" msgstr "Навуковыя прыкладанні" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "Усталяванне пакету %s\n" "%d%%" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "Кыргізтан" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "With basic documentation" msgstr "Аўтэнтыфiкацыя" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "Anacron, перыядычны камандны планавальнiк." #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "Вы павiнны мець каранёвы раздзел.\n" "Для гэтага стварыце раздзел (альбо адзначце ўжо iснуючы).\n" "Потым абярыце ``Кропка манцiравання'' i ўстанавiце яе ў `/'" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "Заходняя Сахара" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "Proxy павiнен быць http://..." #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "Паўднёвая Афрыка" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Eject tape after the backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Etherboot Floppy/ISO" msgstr "Стварыць загр. дыск" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Modify printer configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Choose a partition" msgstr "Абярыце дзеянне" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Other Media" msgstr "Іншыя" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "Logitech MouseMan+" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup system files" msgstr "Дрэнны файл рэзервовай копii" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "Сектар" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Qatar" msgstr "Стартавае меню" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання" #: ../../help.pm:1 #, fuzzy, c-format msgid "generate auto-install floppy" msgstr "Стварэнне дыскеты для ўсталявання" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "Рэжым злучэння" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "Ачышчаць /tmp пры кожнай загрузцы" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "Маляві" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: false" msgstr "Лакальны прынтэр" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "System settings" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please choose your type of mouse." msgstr "калi ласка, пазначце тып вашай мышы." #: ../../services.pm:1 #, fuzzy, c-format msgid "running" msgstr "Увага!" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These are the machines and networks on which the locally connected printer" "(s) should be available:" msgstr "" #: ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "Злучанае Каралеўства" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Indonesia" msgstr "няма" #: ../../standalone/draksec:1 #, c-format msgid "default" msgstr "Па дамаўленню" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "France [SECAM]" msgstr "Францыя" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "абмежаванне" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "павiнны мець" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Senegal" msgstr "Таблiца" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Command line" msgstr "Iмя дамену" #: ../advertising/08-store.pl:1 #, c-format msgid "" "Our full range of Linux solutions, as well as special offers on products and " "other \"goodies\", are available on our e-store:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "Сакавік" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Montserrat" msgstr "Порт мышы" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "Swap" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Custom settings" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Other" msgstr "Аднаўленне з файлу" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Configure CUPS" msgstr "Настройка X Window" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr ", " #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove selected host/network" msgstr "Выдалiць чаргу друку" #: ../../services.pm:1 #, fuzzy, c-format msgid "" "Postfix is a Mail Transport Agent, which is the program that moves mail from " "one machine to another." msgstr "" "Postfix - гэта паштовы транспартны агент, праграма, якая\n" "перамяшчае пошту з адной машыны на йншую." #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Uzbek (cyrillic)" msgstr "Азербайджанскі (кірыліца)" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Network Hotplugging" msgstr "Канфiгурацыя сеткi" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From CD" msgstr "Аднаўленне з дыскеты" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " "this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n" " Інтэрнэту (Internet Connection Sharing)?\n" "\n" "Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n" "\n" "Вы жадаеце усталяваць сумесны доступ да Internet?" #: ../../network/ethernet.pm:1 #, c-format msgid "" "Please choose which network adapter you want to use to connect to Internet." msgstr "" "Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для " "далучэння да iнтэрнэт" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "" "Enhance your computer performance with the help of a selection of partners " "offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "Аўтары: " #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing is now disabled." msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "Лацiна-Амерыканскi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Japanese text printing mode" msgstr "Настройка сеткi" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Old device file" msgstr "Абярыце файл" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "Iнфармацыя: " #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Button `%s': %s" msgstr "Опцыi: %s" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 #: ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "Калi ласка, пачакайце" #: ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "Genius NetMouse" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "None" msgstr "Зроблена" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The entered IP is not correct.\n" msgstr "Гэта дакладна?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "Выбар пакетаў для ўсталявання" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Delete selected printer" msgstr "Выдалiць чаргу друку" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "Iнфармацыя" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "Усталёўка" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "Націсніце \"Так\", калі жадаеце выдаліць усе дадзеныя\n" "і раздзелы на гэтым дыску. Будзце уважлівыя, пасля гэтай аперацыі вы не\n" "\n" "здолееце аднавіць любыя дадзеныя і раздзелы, улічваючы і дадзеныя Windows\n" "\n" "\n" "Націсніце \"Адмена\" каб адмяніць аперацыю без страты дадзеных і раздзелаў" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "Заканчэнне ўсталявання" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " "Area Network, using automatic network configuration (DHCP)." msgstr "" "Усе адканфігуравана.\n" "Зараз вы можаце сумесна выкарыстоўваць падключэнне да Internet\n" "з іншымі камп'ютэрамі ў вашай ЛВС, карыстаючыся аўтаматычным\n" "канфігураваннем (DHCP)." #: ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "Аддалены сервер CUPS" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "Sun - Мыш" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Minimal install" msgstr "Выдалiць з сiстэмы" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Ethiopia" msgstr "Эстонскi" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "Агульны памер: %d / %d Mб" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "disabled" msgstr "Таблiца" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Search for new scanners" msgstr "Даступныя пакеты" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Disabling servers..." msgstr "Вызначэнне прыладаў..." #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "Усталяванне %s не атрымалася. Узнiкла наступная памылка:" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "Сеткавы прынтэр (TCP/Socket)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup User files..." msgstr "Дрэнны файл рэзервовай копii" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "Усталяванне сiстэмы" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "First DNS Server (optional)" msgstr "Першы сервер DNS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "Рускi (фанетычны)" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "dhcpd Config..." msgstr "Настройка IDE" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "Усталяванне LILO/GRUB" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "Iўрыт" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Truly minimal install" msgstr "Выдалiць з сiстэмы" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "Данія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "Пераносіцца раздзел..." #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "(This) DHCP Server IP" msgstr "IP сервера SMB" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "Праверка параметраў настройкi" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing %s ..." msgstr "Усталяванне пакету %s" #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "С'ера Ліонэ" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Botswana" msgstr "Эстонскi" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Andorra" msgstr "Адкат" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "(default value: %s)" msgstr " ? (змоўчанне %s) " #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" msgstr "" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Choose an X server" msgstr "Абярыце X сервер" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "Памер swap раздзелу ў Mб:" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No changes to backup!" msgstr "Дрэнны файл рэзервовай копii" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Formatted\n" msgstr "Фарматаванне\n" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Type of install" msgstr "Выбар пакетаў для усталявання" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" "Пратакол rusers дазваляе карыстальнiкам сеткi вызначаць, хто\n" "ўвайшоў i працуе на машынах ў сетцы." #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Automatic Steps Configuration" msgstr "Настройка мадэму" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "Барбадос" #: ../advertising/02-community.pl:1 #, c-format msgid "" "Want to know more and to contribute to the Open Source community? Get " "involved in the Free Software world!" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to backup..." msgstr "Калi ласка, абярыце мову для карыстання." #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The DNS Server IP" msgstr "IP сервера SMB" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "Высокi" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add a new printer to the system" msgstr "Дадаць карыстальніка ў сыстэму" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printers" msgstr "Лакальны прынтэр" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Installation image directory" msgstr "Заканчэнне настройкi" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "NIS сервер:" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Port: %s" msgstr "Порт" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Spain" msgstr "Iспанскi" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "Гэта iмя карыстальнiку ўжо дададзена" #: ../../interactive.pm:1 #, fuzzy, c-format msgid "Choose a file" msgstr "Абярыце дзеянне" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "Применить" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Auto-detect available ports" msgstr "Аддалены прынтэр" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "Сан Марына" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "Belgium" msgstr "Бельгiйскi" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Kuwait" msgstr "Выхад" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "Абярыце мэнэджар вокнаў:" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "Сьнежань" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Taiwan" msgstr "Размеркаванне" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "Пакістан" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "Узнiкла памылка, якую не атрымліваецца карэктна апрацаваць,\n" "таму працягвайце на сваю рызыку." #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Importance: " msgstr "Значнасць: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." "com/). Click on the \"Drivers\" link. Then choose your model and afterwards " "\"Linux\" as operating system. The drivers come as RPM packages or shell " "scripts with interactive graphical installation. You do not need to do this " "configuration by the graphical frontends. Cancel directly after the license " "agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " "adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Permissions" msgstr "Версiя: %s\n" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "Iмя правайдару, напрыклад правайдар.net" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "У Вашай сiстэме маецца недахоп рэсурсаў, таму магчымы праблемы\n" "пры ўсталяваннi Mandrake Linux. У гэтым выпадку паспрабуйце тэкставую\n" "праграму ўсталявання. Для гэтага нацiснiце `F1' у час загрузкi, а потым\n" "набярыце `text' i нацiснiце ." #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "Выкарыстоўваць раздзел Windows для вiртуальнай файлавай сiстэмы" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "Армянскi (typewriter)" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection type: " msgstr "Iмя злучэння" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Graphical interface" msgstr "Запуск X пры старце сiстэмы" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "Чад" #: ../../lang.pm:1 #, fuzzy, c-format msgid "India" msgstr "Iранскi" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s з падтрымкай 3D-паскарэння" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Slovakia" msgstr "Славенскi" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "Сынгапур" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "Камбоджа" #: ../../Xconfig/various.pm:1 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "Часціня гар.разг. манiтору: %s\n" #: ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here you can specify any arbitrary command line into which the job should be " "piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " "is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a " "higher security level, because the printing system is a potential point for " "attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on " "again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Add host" msgstr "Дадаць карыстальнiка" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your " "card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "No CDROM support" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use quota for backup files." msgstr "Дрэнны файл рэзервовай копii" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer \"%s\"..." msgstr "Настройка прынтэру" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Internet connection" msgstr "Сумеснае Iнтэрнэт-злучэнне" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "Загрузка модулю %s не прайшла.\n" "Жадаеце паспрабаваць з iншымi параметрамi?" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n" "для гэтай кропкi манцiравання\n" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "You must enter a host name or an IP address.\n" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "Нідэрлянды" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Sending files by FTP" msgstr "Захаванне ў файл" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "Унутраная ISDN карта" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no known OSS/ALSA alternative driver for your sound card (%s) which " "currently uses \"%s\"" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Title" msgstr "Таблiца" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Installing bootloader" msgstr "Усталяванне загрузчыку" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "replay" msgstr "Перазагрузiць" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Expect is an extension to the Tcl scripting language that allows interactive " "sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "Дрэнны файл рэзервовай копii" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n" "Часткова інфармацыю пра іх можна атрымаць тут: %s" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "Гаіці" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "Вызначэнне прыладаў..." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Custom allows you to specify your own day and time. The other options use " "run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Basic options" msgstr "Опцыi" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Refreshing printer data..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "Будзьце уважлiвы. Гэтую аперацыю нельга адмянiць" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Insert a floppy containing package selection" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server: " msgstr "сервер" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Alerts:" msgstr "Настройкi ўзроўня бяспекi" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Sweden" msgstr "Гл." #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Poland" msgstr "Iсландскi" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Other ports" msgstr "Iншыя краiны" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid " - detected" msgstr "Аддалены прынтэр" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Connection timeout (in sec)" msgstr "Iмя злучэння" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Some of the early i486DX-100 chips cannot reliably return to operating mode " "after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "Харвацкi" #: ../../help.pm:1 #, fuzzy, c-format msgid "Use existing partition" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Unable to contact mirror %s" msgstr "Зрабiць неактыўным сеткавае злучэнне" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " "configuration, you will not be able to use the printer which you are " "configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "CUPS printer configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "Сервер XFree86 %s" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Domain Name:" msgstr "Iмя дамену" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Root umask" msgstr "Пароль для root" #: ../../any.pm:1 #, fuzzy, c-format msgid "On Floppy" msgstr "Захаванне на дыскету" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore" msgstr "Аднаўленне з файлу" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Server:" msgstr "сервер" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "Прагляд даступных пакетаў" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "Настройкi ўзроўня бяспекi" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "Дадатковая таблiца раздзелаў" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "Кіпар" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connection complete." msgstr "Iмя злучэння" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "Выдалiць з RAID" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Configuration Wizards" msgstr "Канфiгурацыя сеткi" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "ISDN connection" msgstr "Настройка ISDN" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Niue" msgstr "гальштук" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "Прапусцiць" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" "Актывiзаваць/дэактывiзаваць усе сеткавыя iнтэрфейсы, сканфiгураваныя для\n" "старту пры загрузцы сiстэмы." #: ../../standalone/harddrake2:1 #, c-format msgid "" "the CPU frequency in MHz (Megahertz which in first approximation may be " "coarsely assimilated to number of instructions the cpu is able to execute " "per second)" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "важна" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "Дастасаваньне для кіраваньня карыстальнікамі Mandrake Linux" #: ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Aruba" msgstr "Grub" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Users" msgstr "Iмя карыстальнiку:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "Падрыхтоўка загрузчыка" #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "Паролi не супадаюць" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Examples for correct IPs:\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose the media for backup." msgstr "Калi ласка, абярыце мову для карыстання." #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Hardware clock set to GMT" msgstr "Ваш сiстэмны гадзiннiк усталяваны на GMT?" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Do you want to start a new configuration ?" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Give a file name" msgstr "Уласнае iмя" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the port that your printer is connected to." msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: ../../standalone/livedrake:1 #, fuzzy, c-format msgid "Change Cd-Rom" msgstr "Змянiць памеры экрану" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "Парагвай" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "Якую канфiгурацыю XFree вы жадаеце атрымаць?" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, " "assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps " "create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct " "image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it " "expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks " "like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "force" msgstr "Перанос" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Exit" msgstr "Ext2" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "NOTE: Depending on the printer model and the printing system up to %d MB of " "additional software will be installed." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "Эстонскi" #: ../../services.pm:1 #, c-format msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" "Apache - гэта World Wide Web сервер. Ён выкарыстоўзваеца для абслугоўвання\n" "HTML файлаў i CGI." #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 #: ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "Пазначце сеткавы iнтэрфейс" #: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "Загрузачны раздзел па дамаўленню\n" " (для загрузкi MS-DOS, а не для lilo)\n" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image" msgstr "Абярыце дзеянне" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "Iмя злучэння" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You may not be able to install lilo (since lilo doesn't handle a LV on " "multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Updating package selection" msgstr "Асабiсты выбар пакетаў" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "Куды вы жадаеце манцiраваць вiртуальную прыладу %s?" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the number of buttons the mouse has" msgstr "2 кнопкi" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Replay" msgstr "Перазагрузiць" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup other files" msgstr "Дрэнны файл рэзервовай копii" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "Дыскавод недаступны" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "32 Мб" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: thin" msgstr "Тып: " #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "Лiтоўскi AZERTY (новы)" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" "Вы абралi RAID раздзел як каранёвы.\n" "Няма загрузчыку, якi б загрузiўся без /boot раздзела.\n" "Дадайце раздел /boot, калi ласка." #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "Iншая АС (MacOS,...)" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "To activate the mouse," msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "Далучэнне да сеткi" #: ../../common.pm:1 #, fuzzy, c-format msgid "Screenshots will be available after install in %s" msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "На вашым дыску было знойдзена болей за адзін раздзел\n" "Windows. Калі ласка, абярыце той, памер якога жадаеце змяніць, " "кабусталяваць\n" "сістэму Mandrake Linux.\n" "\n" "\n" "Для iфармацыі, кожны раздзел адзначаны як: \"Linux імя\", \"Windows\n" "імя\" \"Cвойствы\".\n" "\"Linux Імя\" кадавана так - \"тып дыску\", \"нумар дыску\",\"нумар " "раздзелу\n" "(напрыклад, \"hda1\").\n" "\n" "\n" "\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n" "\n" "\"Нумар дыску\" - сімвал пасля \"hd\" ці \"sd\". Для IDE дыскаў:\n" " * \"а\" \"master\" на першасным канале IDE \n" " * \"b\" \"slave\" на першасным канале IDE\n" " * \"c\" \"master\" на другасным канале IDE\n" " * \"d\" \"slave\" на другасным канале IDE\n" "\n" "\n" "Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны " "жорскі дыск\", і г.д.\n" "\n" "\"Windows Імя\" сімвал вашага дыску ў Windows (першы дыск ці\n" "раздзел пазначаецца як \"C:\")." #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "Падлік межаў файлавай сiстэмы FAT" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "custom" msgstr "Па выбару" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Authentication LDAP" msgstr "Аўтэнтыфiкацыя" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Palestine" msgstr "Асабiсты выбар пакетаў" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Theme name" msgstr "Iмя для размеркаванага рэсурсу" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "/_Дапамога" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "Выспы Кука" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Here you can choose whether the scanners connected to this machine should be " "accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "Фарматаванне раздзелу %s" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hostname required" msgstr "Iмя машыны" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "З колам" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Submit kernel version" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 #: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/logdrake:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "Адмена" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for configured scanners ..." msgstr "Даступныя пакеты" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Videocard" msgstr "Вiдэа-рэжым" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and bzip2\n" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove Selected" msgstr "Выдалiць чаргу друку" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _modems" msgstr "Аддалены прынтэр" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remove printer" msgstr "Аддалены прынтэр" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Connection Type" msgstr "Iмя злучэння" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "Іншыя" #: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "Па дамаўленню" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Please enter a package name." msgstr "Калi ласка, увядзiце iмя карыстальнiку" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Abiword" msgstr "Адмянiць" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "choose image file" msgstr "Абярыце дзеянне" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "X сервер" #: ../../any.pm:1 #, fuzzy, c-format msgid "Domain Admin User Name" msgstr "Iмя дамену" #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "There was an error while scanning for TV channels" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "US клавiятура (мiжнародная)" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Not installed" msgstr "Заканчэнне ўсталявання" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "LAN connection" msgstr "Размеркаванне" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "Iтальянскi" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "Простые" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "Гандурас" #: ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "IO карты" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Samba server" msgstr "NIS сервер:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "Please choose for each step whether it will replay like your install, or it " "will be manual" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "You can also decide here whether scanners on remote machines should be made " "available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by FTP.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "You must enter a device or file name!" msgstr "URI прынтэру" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_Quit" msgstr "Выхад" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphics memory: %s kB\n" msgstr "Вiдэапамяць: %s Кб\n" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Global statistics" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select data to restore..." msgstr "Калi ласка, абярыце мову для карыстання." #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "Калi вы плануеце выкарыстоўваць boot вобласць, тады размясцiце яе\n" " не далей за 2048 сектароў ад пачатку дыска" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Standard test page" msgstr "Стандартны" #: ../../standalone/drakclock:1 #, fuzzy, c-format msgid "Time Zone" msgstr "Iмя для размеркаванага рэсурсу" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "Стварыць" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "What" msgstr "Чакайце" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "Атрымалася памылка ўпарадкавання пакетаў:" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bulgarian (BDS)" msgstr "Балгарскi" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Disable Server" msgstr "Сервер друку" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Filesystem encryption key" msgstr "Тып файлавай сiстэмы:" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a " "specific entry for\n" " a client machine, using a fixed address scheme facilitates using the " "functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can " "either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, " "while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and " "gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are " "security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access " "to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. " "Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client " "machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' " "tools. This is enabled \n" " by creating separate config files associated with the client's IP " "address and creating \n" " read/write mount points to allow the client to alter the file. Once " "you are satisfied \n" " with the configuration, you can remove root login privileges from " "the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing " "clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Save theme" msgstr "Усталяванне сiстэмы" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "Бразылія" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install" msgstr "Усталёўка" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Network Configuration Wizard" msgstr "Канфiгурацыя сеткi" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Removable media automounting" msgstr "Аўтаманцiраванне зменных назапашвальнікаў" #: ../../services.pm:1 #, fuzzy, c-format msgid "Printing" msgstr "Прынтэр" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory to save:" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "There are no printers found which are directly connected to your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "Стварэнне новага раздзелу" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Driver:" msgstr "сервер" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "Выкарыстоўваць fdisk" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "Рушце колам мышы!" #: ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "Аўтаматычны IP" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Moldova" msgstr "Панядзелак" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuration of a remote printer" msgstr "Настройка прынтэру" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "Proxy павiнен быць http://..." #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a new rule at the end" msgstr "Iмя друкаркi" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also decide here whether printers on remote machines should be " "automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "Вы не можаце задаць опцыi модулю %s.\n" "Опцыi - у фармаце ``iмя=значэнне iмя2=значэнне2 ...''.\n" "Напрыклад, ``io=0x300 irq=7''" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "Выйсцi без запiсу таблiцы раздзелаў" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "Genius NetScroll" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "" #: ../../standalone.pm:1 #, fuzzy, c-format msgid "Installing packages..." msgstr "Усталяванне пакету %s" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "Галандскi" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "Ангола" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "The following packages need to be installed:\n" msgstr "Наступныя пакеты будуць даданы да сiстэмы" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "service setting" msgstr "прылада" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "Па выбару" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Latvia" msgstr "Размеркаванне" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "File is already used by another loopback, choose another one" msgstr "" "Файл ужо выкарыстоўваецца iншай вiртуальнай сiстэмай. Калi ласка, \n" "абярыце iншую назву" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "1 Мб" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "If it is not the one you want to configure, enter a device name/file name in " "the input line" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-" "supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Configure Local Area Network..." msgstr "Настройка лакальнай сеткi" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Preparing printer database..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Information" msgstr "Iнфармацыя" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "No network card" msgstr "сеткавая карта не знойдзена" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "3 кнопкi" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, fuzzy, c-format msgid "Which filesystem do you want?" msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "Мальта" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Detailed information" msgstr "Iнфармацыя" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if " "available) and also the hardware configuration of laser printers (memory, " "duplex unit, extra trays) are set correctly. Note that with a very high " "printout quality/resolution printing can get substantially slower." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "Настройка сеткi" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This option will save files that have changed. Exact behavior depends on " "whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, fuzzy, c-format msgid "Graphic Card" msgstr "Вiдэакарта" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "Вылiчэнне межаў файлавай сiстэмы Windows" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "Камэрун" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Provider dns 1 (optional)" msgstr "DNS 1 правайдару" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "Вы можаце цяпер разбiць ваш дыск %s\n" "Па заканчэннi не забудзьцеся захаваць змяненнi, скарыстаўшы `w'" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Close" msgstr "Порт мышы" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "Каляндар" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." msgstr "" "Для настройкi аддаленай чаргi друку вам патрэбна\n" "пазначыць iмя аддаленага сервера i iмя чаргi друку,\n" "у якую аддалены сервер будзе адпраўляць заданнi." #: ../../lang.pm:1 #, fuzzy, c-format msgid "Iceland" msgstr "Iсландскi" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network & Internet Configuration" msgstr "Канфiгурацыя сеткi" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../services.pm:1 #, fuzzy, c-format msgid "stopped" msgstr "Далучыць" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "Ext2" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "Разгарнуць дрэва" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Expert Mode" msgstr "Эксперт" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "Опцыi прынтэру" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Local Network adress" msgstr "сеткавая карта не знойдзена" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup your System files. (/etc directory)" msgstr "Дрэнны файл рэзервовай копii" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Set the user umask." msgstr "Iмя карыстальнiку:" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Samba Server" msgstr "NIS сервер:" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "" " / between elements | selects | next screen " msgstr "" " / памiж элементамi | выбар | наступны экран " #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Zimbabwe" msgstr "можа быць" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "When" msgstr "З колам" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Hour" msgstr "Гадзіны" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Second DNS Server (optional)" msgstr "Другi сервер DNS:" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "Фінляндыя" #: ../../Xconfig/various.pm:1 #, c-format msgid "Color depth: %s\n" msgstr "Параметры глыбiнi колеру: %s\n" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Яго патрэбна абнавiць" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Loading from floppy" msgstr "Аднаўленне з дыскеты" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Slovenia" msgstr "Славенскi" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Mouse test" msgstr "Mouse Systems" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, " "and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "Увядзiце iмя карыстальнiку\n" "%s" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- PCI and USB devices: this lists the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "ProgressBar color selection" msgstr "Злучэнне прынтэру" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" "У меню маюцца наступныя пункты.\n" "Вы можаце дадаць яшчэ, альбо змянiць iснуючыя." #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "/dev/hda" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "/dev/hdb" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" "Каманды, якiя выконваюцца, фiксуюцца па камандзе i часе яе выканання\n" "i выконваюцца групы каманд, калi загрузка памяцi нiжэй дастатковай." #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing SANE packages..." msgstr "Усталяванне пакету %s" #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "SILO" #: ../../diskdrake/removable.pm:1 #, fuzzy, c-format msgid "Change type" msgstr "Змянiць тып раздзелу" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr "" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "Усталяванне SILO" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "Вiншуем, усталяванне завершана.\n" "Выдалiце загрузачны дыск i нацiснiце enter для перазагрузкi.\n" "\n" "\n" "За iнфармацыяй пра змяненнi дадзенага выпуску Mandrake Linux,\n" "звяртайцесь на \n" "\n" "\n" "%s\n" "\n" "\n" "Iнфармацыя па настройке вашай сiстэмы ёсть ў пасля-ўсталёвачнай\n" "главе вашага Дапаможнiка Карыстальнiку з Афiцыйнага Mandrake Linux." #: ../../standalone/drakclock:1 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "paranoid" msgstr "Паранаiдальны" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "Памеры экрану" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " "the print server, as well as the share name for the printer you wish to " "access and any applicable user name, password, and workgroup information." msgstr "" "Для друку на прынтэры SMB неабходна пазначыць iмя хосту SMB (не заўсёды " "супадае з iменем у сетцы TCP/IP) i адрас IP сервера друку, а таксама iмя " "рэсурсу, якi спалучаны з выбраным прынтэрам, iмя карыстальнiку, пароль i " "iнфармацыю аб працоўнай групе." #: ../../security/help.pm:1 #, c-format msgid "" " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "reconfigure" msgstr "Настройка X Window" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %" "s.\n" "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n" "ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ." #: ../../security/l10n.pm:1 #, c-format msgid "Shell timeout" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Xinetd Service" msgstr "Сервер друку" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "" "And, of course, push multimedia to its limits with the very latest software " "to play videos, audio files and to handle your images or photos." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "Памылка ўсталявання аboot, \n" "спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "" "Restore Selected\n" "Files" msgstr "Выдалiць чаргу друку" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "Калi ласка, запоўнiце цi пазначце поле нiжэй" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM-disks %s\n" msgstr "LVM-дыскi %s\n" #: ../../services.pm:1 #, fuzzy, c-format msgid "On boot" msgstr "Yaboot" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "Выбар пакетаў для ўсталявання" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Bus identification" msgstr "Аўтэнтыфiкацыя" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Vatican" msgstr "Размеркаванне" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "Па-першае, зрабiце рэзервовую копiю вашых дадзеных" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "На якi з маючыхся жорсткiх дыскаў Вы жадаеце ўсталяваць Linux?" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Eritrea" msgstr "Эксперт" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Firmware needed" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove List" msgstr "Аддалены прынтэр" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Some protocols, like rsync, may be configured at the server end. Rather " "than using a directory path, you would use the 'module' name for the service " "path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "Марока" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printer model do you have?" msgstr "Якi тып друкаркi вы маеце?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add a new printer" msgstr "Iмя друкаркi" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "Нэпал" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "<-- Delete" msgstr "Знiшчыць" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "памер блоку" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "commands before booting, or 'c' for a command-line." #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "Праблемы з усталяваннем пакету %s" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "Аднавіць" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Reload partition table" msgstr "Дадатковая таблiца раздзелаў" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Selected" msgstr "Выдалiць чаргу друку" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Boot" msgstr "Root" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Tuner type:" msgstr "Змянiць тып раздзелу" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer " "model correctly. Find the correct model in the list when a wrong model or " "\"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Security Administrator:" msgstr "Опцыi аддаленага прынтэру lpd" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Fonts copy" msgstr "Фарматаваць дыскету" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "Аўтаматычны" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" "GIMP." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Save packages selection" msgstr "Асабiсты выбар пакетаў" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "/_Дзеяньні" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Remove the last item" msgstr "Фарматаванне вiртуальнага раздзелу %s" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "use pptp" msgstr "выкарыстоўваць pppoe" #: ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "Абярыце, якiя сервiсы запускаць аўтаматычна пры загрузцы" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Learn how to use this printer" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configure the network now" msgstr "Настройка сеткi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "Выбар люстра для атрымання пакетаў" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "У праграмы змены памераў раздзела FAT не атрымалася\n" "апрацаваць Ваш раздзел, памылка: %s" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Size: " msgstr "Памер: %s" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "На якi сектар перанесці?" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "Багамы" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Do you want to click on this button?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Manual configuration" msgstr "Настройка" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" "Гэты пакет загружае абраную раскладку клавiятуры як набор з\n" "/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай " "kbdconfig.\n" "Вы можаце зрабiць даступнай яе для шматлікіх машынаў." #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" "Syslog - гэта сродак, з дапамогай якога многiя дэманы запiсваюць " "паведамленнi\n" "ў розныя файлы статыстыкi. Гэта вельмi добра для агляду працы розных службаў." #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Unknown/Others" msgstr "Агульны" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "Опцыi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " "connected to the first parallel port. When your printer is connected to " "another port or to a print server box please connect the printer to the " "first parallel port before you print a test page. Otherwise the printer will " "not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Auto-detected" msgstr "Аддалены прынтэр" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP " "server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable " "using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect " "before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network " "(LAN)." msgstr "" "Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n" " Інтэрнэту (Internet Connection Sharing)?\n" "\n" "Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n" "\n" "Вы жадаеце усталяваць сумесны доступ да Internet?" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent " "sound API (it's available on most UNIX(tm) systems) but it's a very basic " "and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture " "which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using " "the ALSA library.\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please choose the printer you want to set up or enter a device name/file " "name in the input line" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "Адказаць" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "HFS" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "Стварэнне i фарматаванне файла %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned " "on. Download the Windows driver package from the HP web site (the firmware " "on the printer's CD does not work) and extract the firmware file from it by " "uncompresing the self-extracting '.exe' file with the 'unzip' utility and " "searching for the 'sihp1000.img' file. Copy this file into the '/etc/" "printer' directory. There it will be found by the automatic uploader script " "and uploaded whenever the printer is connected and turned on.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "Выбярыце iснуючы LVM для дабаўлення" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "xfs restart" msgstr "абмежаванне" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "няма даступных раздзелаў" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printer Management \n" msgstr "Iмя друкаркi" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Domain Name Resolver" msgstr "Iмя дамену" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Detection in progress" msgstr "Дубляванне пункту манцiравання %s" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "modem" msgstr "Порт мышы" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "Сардэчна запрашаем Сѓ %s" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU " "GPL.\n" "\n" "Usage: \n" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer sharing on hosts/networks: " msgstr "Прынтэр" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a " "particular printing job. Simply add the desired settings to the command " "line, e. g. \"%s \". " msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "DrakClock" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "У некаторых выпадках %s драйверу патрэбна некаторая дадатковая iнфармацыя,\n" "але звычайна гэта не патрабуецца. Цi не жадаеце вы задаць для яго\n" "дадатковыя опцыi, цi дазволiце драйверу пратэсцiраваць машыну\n" "ў пошуках неабходнай iнфармацыi? Магчыма, тэсцiраванне прывядзе\n" "да спынення камп'ютэру, але яно нiчога не сапсуе." #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "Куба" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "Кастрычнік" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Belize" msgstr "Змяненне памераў" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Searching for new printers..." msgstr "Даступныя пакеты" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў XFree %s.\n" "XFree %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты." #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-CD-R.\n" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "Майстар падрыхтоўкi раздзелаў DrakX знайшоў наступныя варыянты:" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "Мадьярскi" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" "Абярыце вашага правайдара.\n" "калi яго няма ў гэтым спiсе, абярыце тып ``Iншы''" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use my Windows partition" msgstr "Вылiчэнне межаў файлавай сiстэмы Windows" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "8 Мб" #: ../../any.pm:1 #, fuzzy, c-format msgid "LDAP Server" msgstr "сервер" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" "Падтрымка PCMCIA - гэта звычайна падтрымка такiх рэчаў, як Ethernet i\n" "мадэмы ў наўтбуках. Вам няма неабходнасцi канфiгураваць iх, калi на вашай\n" "машыне iх няма, цi яна не наўтбук." #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Choose your country" msgstr "Выбар клавiятуры" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" msgstr "" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Standalone Tools" msgstr "Кансольныя інструментальныя сродкі" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Where" msgstr "З колам" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "Here you can select an alternative driver (either OSS or ALSA) for your " "sound card (%s)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "Настройка карт PCMCIA ..." #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "%s: %s requires a username...\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "Microsoft IntelliMouse" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "Выспа Расства" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Automatic" msgstr "Аўтаматычны IP" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнiкла наступная памылка:" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Verify that %s is the correct path" msgstr "Гэта дакладна?" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "Раздзел %s" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "Паранаiдальны" #: ../../any.pm:1 #, fuzzy, c-format msgid "NIS" msgstr "Выкарыстоўваць NIS" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No printer found!" msgstr "Лакальны прынтэр" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "Сцёрцi дадзеныя на ўсiм дыску" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr " (Па дамаўленню)" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Automatic reconfiguration" msgstr "Настройка мадэму" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Transfer Now" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "Пераключэнне памiж упарадкаваннем па групе i асобках" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Themes" msgstr "Дрэва" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "Опцыi: %s" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "Сумеснае Iнтэрнэт-злучэнне" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "OKI winprinter configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Parallel port #%s" msgstr "Iмя прынтэру" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Security Level" msgstr "Настройкi ўзроўня бяспекi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "Некаторыя крокi не завершаны.\n" "Вы сапраўды жадаеце выйсцi зараз?" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Sudan" msgstr "SunOS" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "Польскi (qwertz раскладка)" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " "LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " "an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "Партугальскi" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "Iмя вiртуальнага раздзелу" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "IP адрас павiнен быць у фармаце 1.2.3.4" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Left Control key" msgstr "Аддалены прынтэр" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Serbia" msgstr "паслядоўная" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Across Network" msgstr "Сетка:" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "Усталяванне загрузчыку" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "Пазначце памер вiдэапамяцi" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "Знойдзены %s %s iнтэрфейсы" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Post Install" msgstr "Усталёўка" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "The internal domain name" msgstr "Iмя друкаркi" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "IRQ карты" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring " "application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "Абярыце дыскавод, у якiм будзе стварацца загрузачная дыскета" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Everything (no firewall)" msgstr "Ўсё сканфiгуравана!" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../interactive/newt.pm:1 #, fuzzy, c-format msgid "Do" msgstr "Зроблена" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "Лiтоўскi AZERTY (стары)" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "Бразiльскi (ABNT-2)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System installation" msgstr "Усталяванне SILO" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Location of auto_install.cfg file" msgstr "Стварэнне дыскеты для ўсталявання" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Hungary" msgstr "Мадьярскi" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "Новая Зэляндыя" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Color configuration" msgstr "Настройка" #: ../../security/level.pm:1 #, c-format msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "please choose the date to restore" msgstr "калi ласка, пазначце тып вашай мышы." #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "Нідэрлянская Анцілія" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from " "this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives " "you access to all available printer drivers, driver options, and printer " "connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "and %d unknown printers" msgstr "Iмя друкаркi" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Early Intel Pentium chips manufactured have a bug in their floating point " "processor which did not achieve the required precision when performing a " "Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "Карта ISDN PCI не знойдзена. Калi ласка, пазначце на наступным экране." #: ../../common.pm:1 #, c-format msgid "GB" msgstr "" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "Калi ласка, увядзiце iмя карыстальнiку" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "Студзень" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Password history length" msgstr "Гэты пароль занадта просты" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Winmodem connection" msgstr "Злучэнне прынтэру" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in " "the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change " "the default option settings (paper input tray, printout quality, ...), " "select \"Printer\" in the \"Hardware\" section of the Mandrake Control " "Center." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Now, you can run xawtv (under X Window!) !\n" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "Не хапае месца ў буферы падкачкi (swap) для ўсталявання, павялiчце яго." #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "%s on %s" msgstr "Порт" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid remote root login." msgstr "Аддалены прынтэр" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "Якi ваш часавы пояс?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use .backupignore files" msgstr "Дрэнны файл рэзервовай копii" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Guinea" msgstr "Агульны" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "The system is now connected to the Internet." msgstr "Як вы плануеце далучыцца да Iнтэрнэту?" #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "Мазамбік" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "Пiктаграма" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Kill those programs" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please choose what you want to backup" msgstr "Выбар пакетаў для ўсталявання" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "256 колераў (8 бiтаў)" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "Чытанне-запiс" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s\n" msgstr "Памер: %s\n" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Hostname: " msgstr "Iмя машыны" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Add a rule" msgstr "Дадаць карыстальнiка" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Chunk size %s\n" msgstr "Памер фрагменту %s\n" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Local Printer" msgstr "Лакальны прынтэр" #: ../../network/tools.pm:1 #, fuzzy, c-format msgid "Floppy access error, unable to mount device %s" msgstr "Куды вы жадаеце манцiраваць прыладу %s?" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "ADSL connection" msgstr "Размеркаванне" #: ../../standalone/drakbackup:1 #, c-format msgid "No configuration, please click Wizard or Advanced.\n" msgstr "" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Error!" msgstr "Памылка" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "cable connection detected" msgstr "Злучэнне прынтэру" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "/_Паведаміць пра памылку" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Dominica" msgstr "NIS Domain" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "Змяненне памераў" #: ../../Xconfig/various.pm:1 #, c-format msgid "Resolution: %s\n" msgstr "Памеры экрану: %s\n" #: ../../install2.pm:1 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "Наступныя пакеты будуць выдалены" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "Далучэнне да Iнтэрнэту" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "Канадскi (Квебэк)" #: ../../Xconfig/various.pm:1 #, c-format msgid "Mouse device: %s\n" msgstr "Мыш: %s\n" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../advertising/13-mdkexpert_corporate.pl:1 #, fuzzy, c-format msgid "MandrakeExpert Corporate" msgstr "эксперт" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Write protection" msgstr "Аддалены прынтэр" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "You've not selected any font" msgstr "Выдалiць чаргу друку" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "Выбар мовы" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer model selection" msgstr "Злучэнне прынтэру" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "ISDN adapters" msgstr "Унутраная ISDN карта" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "%d секундаў" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../harddrake/sound.pm:1 #, fuzzy, c-format msgid "Sound configuration" msgstr "Настройка" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Photo test page" msgstr "Друк тэставых старонак" #: ../../help.pm:1 ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Custom disk partitioning" msgstr "Выкарыстоўваць iснуючы раздзел" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: %s" msgstr "Тып: " #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "Славацкi (QWERTY)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "This should be a comma-separated list of local users or email addresses that " "you want the backup results sent to. You will need a functioning mail " "transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, fuzzy, c-format msgid "No Sound Card detected!" msgstr "Размеркаванне" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "Порт мышы" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Ftp Server" msgstr "NIS сервер:" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Uganda" msgstr "Адкат" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "the type of bus on which the mouse is connected" msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "Камарас" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "Травень" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Yaboot mode" msgstr "Загрузачная прылада" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "Звычайная мыш з 3 кнопкамі" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Select another media to restore from" msgstr "калi ласка, пазначце тып вашай мышы." #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Software Manager" msgstr "Iмя для размеркаванага рэсурсу" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Network & Internet" msgstr "Сеткавы iнтэрфейс" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "Лiтоўскi \"фанетычны\" QWERTY" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Sharing of local scanners" msgstr "Даступныя пакеты" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote host name missing!" msgstr "Аддалены вузел" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Network" msgstr "Сетка:" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "Гэты пароль занадта просты" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Chkconfig obey msec rules" msgstr "Настройка службаў" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "Славацкi (QWERTZ)" #: ../advertising/06-development.pl:1 #, c-format msgid "" "To modify and to create in different languages such as Perl, Python, C and C+" "+ has never been so easy thanks to GNU gcc 3 and the best Open Source " "development environments." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "No devices found" msgstr "Лакальны прынтэр" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use daemon" msgstr "Iмя карыстальнiку:" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 #: ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "Аўтэнтыфiкацыя" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Additional CUPS servers: " msgstr "IP сервера SMB" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "Куды вы жадаеце манцiраваць прыладу %s?" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Algeria" msgstr "паслядоўная" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Via Network" msgstr "Пераканфiгураваць лакальную сетку" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Initrd-size" msgstr "Initrd" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\tBackups use tar and gzip\n" msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set as default" msgstr "Па дамаўленню" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "2 Мб" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configured on this machine" msgstr "Настройка мышы" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid " --help - display this help \n" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in " "MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the " "description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Setting Default Printer..." msgstr "Лакальны прынтэр" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Generating preview ..." msgstr "Вызначэнне прыладаў..." #: ../../network/network.pm:1 #, c-format msgid "" "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " "frequency), or add enough '0' (zeroes)." msgstr "" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "ignore" msgstr "няма" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "паслядоўная" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "Грузiнскi (\"Лацiнская\" раскладка)" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Kenya" msgstr "Клавiятура" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "Спачатку зрабiце ``Unmount''" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Installing mtools packages..." msgstr "Усталяванне пакету %s" #: ../../any.pm:1 #, fuzzy, c-format msgid "You must specify a root partition" msgstr "Вы павiнны мець раздзел swap" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "first step creation" msgstr "Настройка пасля ўсталявання" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Select a scanner model" msgstr "Абярыце вiдэакарту" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Drakbackup Configuration" msgstr "Канфiгурацыя сеткi" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../install_gtk.pm:1 #, fuzzy, c-format msgid "System configuration" msgstr "Настройка" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "Аўтаматычны ўваход у сiстэму" #: ../../any.pm:1 #, fuzzy, c-format msgid "Domain Admin Password" msgstr "Падцвердзiць пароль" #: ../advertising/05-desktop.pl:1 #, c-format msgid "" "Perfectly adapt your computer to your needs thanks to the 11 available " "Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " "2.2, Window Maker, ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Configuring printer ..." msgstr "Настройка прынтэру" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "Мб" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Bermuda" msgstr "Нямецкi" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "Далей адзначаны усе існуючыя раздзелы Linux, знойдзеныя на вашым дыску,\n" " якія зроблены майстрам вылучэння дыскаў. Вы можаце пакінуць іх так і " "выкарыстўваць\n" " далей, бо яны добра падыходзяць для звычайнага выкарыстання. Калі вы\n" " ўносіце змены, вы павінны, вылучыць хаця раздзел (\"/\"). Рабіце\n" " раздзел не вельмі малым, бо ў адваротным выпадку вы ня здолееце усталяваць\n" " дастаткова праграмнага забеспячэння.Калі вы жадаеце захаваць вашыя " "дадзеныя\n" " на асобным раздзеле, вы павінны абраць пункт манціравання \"/home\".\n" "\n" "Кожны раздзел пазначаны наступным чынам \"Імя\", \"Свойствы\".\n" "\n" "\n" "\"Імя\" кадавана так - \"тып дыску\", \"нумар дыску\", \"нумар раздзелу\" \n" "(напрыклад, \"hda1\").\n" "\n" "\n" "\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n" " * \"а\" \"master\" на першасным канале IDE \n" " * \"b\" \"slave\" на першасным канале IDE\n" " * \"c\" \"master\" на другасным канале IDE\n" " * \"d\" \"slave\" на другасным канале IDE\n" "\n" "\n" "Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны " "жорскі дыск\", і г.д." #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, fuzzy, c-format msgid "Remove" msgstr "Аддалены прынтэр" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "Лісота" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Remove system config files" msgstr "Фарматаванне вiртуальнага раздзелу %s" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "Котэ дэ Інворэ" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/drakgw:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "Так" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "Якi пратакол вы жадаеце выкарыстоўваць?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore Progress" msgstr "Аднаўленне з файлу" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Estonia" msgstr "Эстонскi" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions." msgstr "" "Вы маеце дзiрку ў таблiцы радзелаў, але я не маю магчымасцi яе скарыстаць.\n" "Адзiны выхад у тым, каб перамясцiць першасныя раздзелы так, каб дзiрка iшла\n" "адразу за пашыраным (extended) раздзелам" #: ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Channel" msgstr "Адмена" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "Дадаць" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " Error while sending mail. \n" msgstr "Памылка чытання файлу %s" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "Клавiятура" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " "enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Choose the connection you want to configure" msgstr "Абярыце iнструмент, якi жадаеце скарыстаць" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "Please wait, setting security level..." msgstr "Настройкi ўзроўня бяспекi" #: ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "Настройка сеткавай прылады %s" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "activated" msgstr "Актыўны" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" "Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для " "далучэння да iнтэрнэт" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "Пошук пакетаў для абнаўлення" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "Пункт манцiравання:" #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../security/help.pm:1 #, fuzzy, c-format msgid "Allow/Forbid direct root login." msgstr "Аддалены прынтэр" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "With X" msgstr "Чакайце" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Multi-head configuration" msgstr "чытанне настройкi" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "No browser available! Please install one" msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "Ці жадаеце Вы захаваць змяненні?\n" "Бягучая канфігурацыя:\n" "\n" "%s" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 32 Мб" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" "Пратакол rwho дае магчымасць карыстальнiкам атрымаць спiс ўсiх\n" "карыстальнiкаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)." #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "Iмя дамену" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Sharing of local printers" msgstr "Даступныя пакеты" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Available printers" msgstr "Даступныя пакеты" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "Пуста" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "Куды вы жадаеце манцiраваць прыладу %s?" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" "\n" "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне." #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Interface \"%s\"" msgstr "Сеткавы iнтэрфейс" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "1 button" msgstr "2 кнопкi" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "Тэст" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Korea" msgstr "Перанос" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (default `%s'%s) " msgstr "Ваш выбар? (змоўчанне %s) " #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Raw printer" msgstr "Iмя друкаркi" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Vendor" msgstr "Адкат" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Interface %s" msgstr "Сеткавы iнтэрфейс" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "Настройка мышы" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "Абярыце пункты манцiравання" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "Так" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Yugoslavian (latin)" msgstr "Азербайджанскі (latin)" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "Усталёўваем" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "Logitech MouseMan" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Is this an install or an upgrade?" msgstr "Абярыце ўсталяванне цi абнаўленне" #: ../../help.pm:1 #, fuzzy, c-format msgid "ISDN card" msgstr "Унутраная ISDN карта" #: ../advertising/02-community.pl:1 #, c-format msgid "" "To share your own knowledge and help build Linux software, join our " "discussion forums on our \"Community\" webpages." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Hard drive.\n" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on remote CUPS server" msgstr "Аддалены сервер CUPS" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "DHCP host name" msgstr "Iмя машыны" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш." #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "Зусім слабы" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "Грэнада" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "Ненадзейна" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "SSH server" msgstr "NIS сервер:" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr ", %s сектараў" #: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 #: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 #: ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "Не" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "Гвадэлупа" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Kannada" msgstr "Канадскi (Квебэк)" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font.\n" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "Часціня вертыкальнай разгорткi" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "Entering step `%s'\n" msgstr "Пераход на крок `%s'\n" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Niger" msgstr "Высокi" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "Logitech MouseMan" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Removing %s ..." msgstr "Памеры экрану: %s\n" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "No printer" msgstr "Iмя друкаркi" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "alert configuration" msgstr "Настройка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "Опцыi прынтэру NetWare" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "Люты" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "General" msgstr "Агульны" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "Дадаць карыстальнiка" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Network configuration (%d adapters)" msgstr "Канфiгурацыя сеткi" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "Красавік" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Deactivate now" msgstr "Актыўны" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "Хвіліпіны" #: ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 #: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 #: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 #: ../../standalone/draksec:1 ../../standalone/mousedrake:1 #: ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "Ок" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "Iмя чаргi друку" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "Вы жадаеце выкарыстоўваць aboot?" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "Беларускі" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Move files to the new partition" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Add here the CUPS servers whose printers you want to use. You only need to " "do this if the servers do not broadcast their printer information into the " "local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/" "they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Pitcairn" msgstr "Прынтэр" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore From Catalog" msgstr "Дадатковая таблiца раздзелаў" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "IDE" #: ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "Чакаецца" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "SMB/Windows 95/98/NT" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "Усё роўна працягваць?" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "Прагляд даступных пакетаў" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "Пазначце параметры" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "Ванааці" #: ../../standalone/drakbackup:1 #, c-format msgid "New user list:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "З дапамогай загрузачнага дыска вы зможаце загружаць Linux незалежна ад\n" " стандартнага загрузчыка. Гэта можа быць якасна, калi вы не жадаеце \n" "ўсталёўваць SILO, калi iншая аперацыйная сiстэма выдаляе SILO, цi SILO не \n" "можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама можа быць \n" "выкарыстан сумесна з выратавальнай дыскетай Mandrake Linux, якая вельмi \n" "палегчыць выратаванне сiстэмы пасля збою.\n" "\n" "Калi жадаеце стварыць загрузачны дыск зараз, устаўце дыскету ў першы\n" "дыскавод i нацiснiце \"Ok\"." #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" "Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n" "для гэтай кропкi манцiравання\n" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "Норфалскія выспы" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Theme installation failed!" msgstr "Клас усталявання" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "Выкарыстоўваць для вiртуальнай файлавай сiстэмы" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "Ужыць фільтар" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "выкарыстоўваць pppoe" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Moving files to the new partition" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s з эксперыментальнай падтрымкай 3D-паскарэння" #: ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Dvorak (Swedish)" msgstr "Dvorak (US)" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Afghanistan" msgstr "Iранскi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "More Options" msgstr "Опцыi модулю:" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "Бурундзі" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" "cron - стандартная UNIX праграма, якая выконвае праграмы карыстальнiка\n" "праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да " "стандартнага\n" "UNIX cron, уключаючы лепшы ўзровень бяспекi i моцныя канфiгурацыйныя опцыi." #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "Чытайце ўважлiва!" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "Порт" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Press enter to boot the selected OS, 'e' to edit the" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "The encryption keys do not match" msgstr "Паролi не супадаюць" #: ../../standalone/drakbackup:1 #, c-format msgid "" "For a multisession CD, only the first session will erase the cdrw. Otherwise " "the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "USB printer" msgstr "Iмя друкаркi" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "Памеры экрану" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Remove selected host" msgstr "Выдалiць чаргу друку" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid "Network configuration" msgstr "Канфiгурацыя сеткi" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/Autodetect _jaz drives" msgstr "Аддалены прынтэр" #: ../../any.pm:1 #, fuzzy, c-format msgid "No sharing" msgstr "Чакаецца" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "FATAL" msgstr "FAT" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "Аднавіць сьпіс" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given " "range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "Знiшчыць" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "Можна настроiць сiстэму для аўтаматычнага запуску X пасля старту сiстэмы.\n" "Жадаеце, каб X стартаваў пры рэстарце?" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnect %s" msgstr "Настройка ISDN" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "Стан:" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "HTTP proxy" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "SSH Server" msgstr "NIS сервер:" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by rsync.\n" msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "European protocol" msgstr "Еўропа (EDSS1)" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 #: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../standalone/drakauth:1 ../../standalone/drakboot:1 #: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 #: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 #: ../../standalone/draksplash:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "Памылка" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Australia" msgstr "паслядоўная" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../Xconfig/card.pm:1 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "Канфiгураваць маю карту" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Level" msgstr "узровень" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Change the printing system" msgstr "Настройка сеткi" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "памылка манцiравання: " #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "Настройка службаў" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "the GNU/Linux kernel needs to run a calculation loop at boot time to " "initialize a timer counter. Its result is stored as bogomips as a way to " "\"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "Вобраз" #: ../../services.pm:1 #, fuzzy, c-format msgid "Remote Administration" msgstr "Опцыi аддаленага прынтэру lpd" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../modules.pm:1 #, c-format msgid "" "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Selected All" msgstr "Абярыце файл" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Webmin Service" msgstr "прылада" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "прылада" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory to save to:" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Greece" msgstr "Грэчаскi" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "Усё" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "Ліпень" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Prints into %s" msgstr "Памылка запiсу ў файл %s" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "Адбылася памылка" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "Гэты пакет павiнен быць абноўлены\n" "Вы ўпэўнены, што хочаце адмянiць вылучэнне?" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Tamil (Typewriter-layout)" msgstr "Армянскi (typewriter)" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid the list of users on the system on display managers (kdm and " "gdm)." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Printer on NetWare server" msgstr "Сервер друку" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "Пазначце памер RAM у Mб" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "Пятніца" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Disconnection from Internet complete." msgstr "Далучэнне да Iнтэрнэту" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "Уласнае iмя" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "done" msgstr "Зроблена" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please uncheck or remove it on next time." msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Higher" msgstr "Высокi" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "Выбар раздзелаў для фарматавання" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-" "supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Can't find %s on %s" msgstr "Памылка адкрыцця %s для запiсу: %s" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "Японскi 106 клавiш" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "Буркіна Хвасо" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "Чэрвень" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Delete selected rule" msgstr "Выдалiць чаргу друку" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Accessing printers on remote CUPS servers" msgstr "Аддалены сервер CUPS" #: ../../any.pm:1 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "Мальды" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "кампактна" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "1 хвiлiна" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "type: fat" msgstr "Тып: " #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "на шыне %d id %d\n" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "Лаос" #: ../advertising/04-configuration.pl:1 #, c-format msgid "" "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " "tool to fully adapt your computer to the use you make of it. Configure and " "customize elements such as the security level, the peripherals (screen, " "mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" "Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n" "ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "Сервер друку" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Custom configuration" msgstr "Настройка" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD " "contents.\n" "\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "Верасень" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Portugal" msgstr "Порт" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "Цi ёсць у вас iншы?" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", printing to %s" msgstr "Памылка запiсу ў файл %s" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Assign host name from DHCP address" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "Звычайны рэжым" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "Агульны" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "Цылiндры з %d па %d\n" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "На якi дыск перанесці?" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Windows Domain" msgstr "Навуковыя прыкладанні" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Saami (norwegian)" msgstr "Dvorak (Нарвежскi)" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "Interface %s (on network %s)" msgstr "Сеткавы iнтэрфейс" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "There are no scanners found which are available on your system.\n" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "Маршалавы выспы" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "Гэта дакладна?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Windows (FAT32)" msgstr "Выдалiць Windows(TM)" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "Пароль для root" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVDRAM device" msgstr "прылада" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "Няма раздзела swap.\n" "\n" "Усё адно працягваць?" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Version: " msgstr "Версiя: %s\n" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Server IP missing!" msgstr "Iмя прынтэру" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Suriname" msgstr "Iмя для размеркаванага рэсурсу" #: ../../network/adsl.pm:1 #, fuzzy, c-format msgid "Use a floppy" msgstr "Захаванне на дыскету" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "Гібралтар" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Do nothing" msgstr "Чакаецца" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Delete Client" msgstr "Знiшчыць" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "Тып файлавай сiстэмы:" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Starting network..." msgstr "Якi тып вашага ISDN злучэння?" #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "/_Fields description" msgstr "Апiсанне" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 #: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 #: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 #: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 #: ../../standalone/drakperm:1 ../../standalone/draksec:1 #: ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "Дапамога" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "Ваш асабiсты тэлефонны нумар" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "Якую прастору захаваць для Windows?" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "" "Тэставыя старонкi адпраўлены дэману друку.\n" "Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n" "Ён працуе нармальна?" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Username required" msgstr "Iмя карыстальнiку:" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Device" msgstr "Прылада:" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "Опцыi прынтэру SMB (Windows 9x/NT)" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "" "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " "Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Protocol for the rest of the world" msgstr "Падключэнне" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Print test pages" msgstr "Друк тэставых старонак" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Activate now" msgstr "Актыўны" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "64 Мб цi болей" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " "laser printers with too low memory it can even not come out. In most cases " "it is enough to print the standard test page." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Not formatted\n" msgstr "Не адфарматавана\n" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "PXE Server Configuration" msgstr "Заканчэнне настройкi" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup the system files before:" msgstr "Дрэнны файл рэзервовай копii" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "Гэта стандартны узровень бяспекi, якi рэкамендаваны для камп'ютэру,\n" "якi далучаны да Internet у якасцi клiенту. Даданыя новыя праверкi\n" "бяспекi." #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "Першы дыскавод" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "Dvorak" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "Выбар новых памераў" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Faroe Islands" msgstr "Iсландскi" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Restart XFS" msgstr "абмежаванне" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Model name" msgstr "Опцыi модулю:" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Albania" msgstr "Iранскi" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "Брытанская тэрыторыя Індыйскага акіяна" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Normal Mode" msgstr "Звычайны" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer connection type" msgstr "Сумеснае Iнтэрнэт-злучэнне" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Network %s" msgstr "Сетка:" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connect %s" msgstr "Iмя злучэння" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Restarting CUPS..." msgstr "абмежаванне" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "Дубляванне пункту манцiравання %s" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "Настройка далучэння да Iнтэрнэту" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Unknown|Generic" msgstr "Агульны" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "Маянмар" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 #: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 #: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 #: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "Выхад" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "Размеркаваць аўтаматычна" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "Праверыць на наяўнасць дрэнных блокаў?" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Other MultiMedia devices" msgstr "Іншыя" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "burner" msgstr "Прынтэр" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid " (Default is all users)" msgstr "Лакальны прынтэр" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "No remote machines" msgstr "Аддалены прынтэр" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this " "computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " "this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " "to set up your printer(s) now." msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Authentication NIS" msgstr "Аўтэнтыфiкацыя NIS" #: ../../any.pm:1 #, c-format msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "Опцыя ``Абмежаванне опцыяў каманднага радку'' не выкарыстоўваецца без пароля" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "Злучаныя Арабскія Эміраты" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "IO_0 карты" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "Тайланд" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "IO_1 карты" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "Казахстан" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Write" msgstr "Эксперт" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "Усталяванне Mandrake Linux %s" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "Тайская клавiятура" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "Выспа Боўвіт" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "Параметры камутаванага злучэння (Dialup)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique " "configuration files\n" " \ton the root filesystem of the server. By allowing local client " "hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/" "sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root " "login to the terminal \n" " server on each client machine that has this feature enabled. Local " "configuration can be\n" " turned back off, retaining the configuration files, once the client " "machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "Змянiце ваш Cd-Rom!\n" "\n" "Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк " "пасля.\n" "Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага " "Cd." #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "Польскi" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Online" msgstr "Далучэнне да Iнтэрнэту" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by webdav.\n" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", multi-function device on a parallel port" msgstr "Iмя прынтэру" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" "Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, " "скарыстайце канфiгурацыйны iнструмэнт." #: ../../network/network.pm:1 ../../standalone/drakconnect:1 #: ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "Маска сеткi" #: ../../diskdrake/hd_gtk.pm:1 #, fuzzy, c-format msgid "No hard drives found" msgstr "Лакальны прынтэр" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "2 кнопкi" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "Logitech CC Series" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "Якi тып вашага ISDN злучэння?" #: ../../any.pm:1 #, c-format msgid "Label" msgstr "Метка" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "Захаванне на дыскету" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Check open ports" msgstr "Дубляванне пункту манцiравання %s" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Edit selected printer" msgstr "Выдалiць чаргу друку" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer auto-detection" msgstr "Аддалены прынтэр" #: ../../network/isdn.pm:1 #, fuzzy, c-format msgid "Which of the following is your ISDN card?" msgstr "Якая ў вас ISDN карта?" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" "NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткi.\n" "Гэтая служба забяспечваецца NFS серверам, якi канфiгурыруеца праз\n" "/etc/exports файл." #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Msec" msgstr "Порт мышы" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../interactive/stdio.pm:1 #, fuzzy, c-format msgid "Your choice? (0/1, default `%s') " msgstr "Ваш выбар? (змоўчанне %s) " #: ../../help.pm:1 #, fuzzy, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" "Усе раздзелы, якія былі толькі вызначаны павінны быць\n" "адфарматаваны (фарматаваць - значыць стварыць файлаваю сістэму).\n" "\n" "\n" "У той жа час, вы можаце перафарматаваць ужо існуючыя раздзелы, каб сцёрці\n" "дадзеныя якія яны ўтрымліваюць. Калі вы жадаеце зрабіць гэта, абярыце " "раздзелы\n" "якія жадаеце адфарматаваць.\n" "\n" "\n" "Заўважце, вы павінны перафарматаваць усе створаныя раздзелы. Вы павінны\n" "перафарматаваць раздзелы, якія ўтрымліваюць аперацыйную сістэму (тыпу \"/" "\",\n" "\"/usr\" ці \"/var\"), але не павінны перафарматаваць раздзелы, якія " "утрымліваюць\n" "дадзеныя, якія вы жадаеце захаваць (звычайна /home).\n" "\n" "\n" "Калі ласка, будзце ўважлівыя, абіраючы раздзелы, бо пасля фарматавання\n" "усе дадзеныя будуць незваротна выдаленыя.\n" "\n" "\n" "Націсніце \"Так\" калі вы гатовыя фарматаваць раздзеля.\n" "\n" "\n" "Націсніце \"Адмена\" калі жадаеце абраць іншыя раздзелы для " "усталяваннявашай\n" "новай аперацыйнай сістэмы Mandrake Linux." #: ../../keyboard.pm:1 #, c-format msgid "French" msgstr "Французскi" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "Чешскi (QWERTY)" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow X Window connections" msgstr "Злучэнне прынтэру" #: ../../standalone/service_harddrake:1 #, fuzzy, c-format msgid "Hardware probing in progress" msgstr "Дубляванне пункту манцiравання %s" #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Net Device" msgstr "Сервер друку" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "Агульныя зьвесткі" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, fuzzy, c-format msgid "Next" msgstr "Далей ->" #: ../../bootloader.pm:1 #, fuzzy, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "CHAP" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "Пуэрта Рыка" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "(bootp/dhcp)" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Telnet server" msgstr "X сервер" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "Лiтоўскi \"нумар радка\" QWERTY" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "Ангулла" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "NIS Domain" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "Антарктыка" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, fuzzy, c-format msgid "Mount options" msgstr "Опцыi модулю:" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "Ямайка" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "Please wait, preparing installation..." msgstr "Падрыхтоўка ўсталяваньня" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "Чешскi (QWERTZ)" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "You must choose an image file first!" msgstr "URI прынтэру" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Restore from Hard Disk." msgstr "Аднаўленне з дыскеты" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "Дадаць да LVM" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "DNS сервер" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "LPD and LPRng do not support IPP printers.\n" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Host name or IP." msgstr "Iмя машыны" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "/_Рэдагаваць" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "Ачысцiць усё" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "No test pages" msgstr "Так, надрукаваць абедзве старонкi тэксту" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Boot disk creation" msgstr "Настройка пасля ўсталявання" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "Панядзелак" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "authentication" msgstr "Аўтэнтыфiкацыя" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup Now" msgstr "Настр. файлавых сiстэмаў" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_File" msgstr "Файлы:\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Editable" msgstr "Таблiца" #: ../../network/ethernet.pm:1 #, fuzzy, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" "Якi dhcp клiент вы плануеце выкарыстоўваць?\n" "Па змоўчанню, гэта dhcp-client" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "Майотэ" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "%d KB\n" msgstr "Памер: %d Kб\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "Стварэнне дыскеты для ўсталявання" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for scanners ..." msgstr "Даступныя пакеты" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Russia" msgstr "Рускi" #: ../../steps.pm:1 #, fuzzy, c-format msgid "Partitioning" msgstr "Прынтэр" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../advertising/11-mnf.pl:1 #, c-format msgid "" "Complete your security setup with this very easy-to-use software which " "combines high performance components such as a firewall, a virtual private " "network (VPN) server and client, an intrusion detection system and a traffic " "manager." msgstr "" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "Not enough free space for auto-allocating" msgstr "Не хапае прасторы для стварэння новых раздзелаў" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "Пароль для root" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "There's no free driver for your sound card (%s), but there's a proprietary " "driver at \"%s\"." msgstr "" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Group :" msgstr "Працоўная група" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Internet connection configuration" msgstr "Iнтэрнэт злучэнне i канфiгурацыя" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "USB" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "/_About..." msgstr "Адмянiць" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Bengali" msgstr "Таблiца" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "Параметры: " #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "Стварыць загр. дыск" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "Саламонавы выспы" #: ../../standalone/mousedrake:1 #, fuzzy, c-format msgid "Please test your mouse:" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "(модуль %s)" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "Працоўная група" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer host name or IP" msgstr "Iмя прынтэру" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "down" msgstr "Зроблена" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Show current interface configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Add Printer" msgstr "Прынтэр" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Development" msgstr "распрацоўшчык" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "Зроблена" #: ../../network/drakfirewall.pm:1 #, fuzzy, c-format msgid "Web Server" msgstr "сервер" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Chile" msgstr "Порт мышы" #: ../../standalone/drakbackup:1 #, c-format msgid "\tDo not include System Files\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " "Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " "scanner when you have more than one) from the command line or with the " "graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " "you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" "\" menu. Call also \"man scanimage\" on the command line to get more " "information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "(ужо дададзена %s)" #: ../../any.pm:1 #, fuzzy, c-format msgid "Bootloader installation in progress" msgstr "Усталяванне загрузчыку" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add/Del Users" msgstr "Дадаць карыстальнiка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "Усталёўкі" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The entered host/network IP is not correct.\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Alternative test page (A4)" msgstr "Друк тэставых старонак" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "Калi вы маеце ўсе CD дыскi са спiса нiжэй, нацiснiце Ок.\n" "Калi вы не маеце анi воднага з гэтых CD дыскаў, нацiснiце Адмянiць.\n" "Калi некаторых з CD дыскаў не маеце, адмянiце iх выдзяленне i нацiснiце Ок." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "PAP" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Backup user files" msgstr "Дрэнны файл рэзервовай копii" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "Новы" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Load from floppy" msgstr "Аднаўленне з дыскеты" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "The following printer was auto-detected. " msgstr "Наступныя пакеты будуць выдалены" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Uses command %s" msgstr "Порт" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "Нарвежскi" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Searching for new scanners ..." msgstr "Даступныя пакеты" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "select path to restore (instead of /)" msgstr "калi ласка, пазначце тып вашай мышы." #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Configure bootsplash picture" msgstr "Настройка службаў" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Georgia" msgstr "Нарвежскi" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "Кітай" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid " (Make sure that all your printers are connected and turned on).\n" msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Reading data of installed printers..." msgstr "Даступныя пакеты" #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "сервер" #: ../../install_any.pm:1 #, fuzzy, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "Устаўце дыскету ў дыскавод %s" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Please Wait... Applying the configuration" msgstr "Праверка параметраў настройкi" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "Welcome to GRUB the operating system chooser!" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "Grub" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, fuzzy, c-format msgid "Zeroconf Host name" msgstr "Iмя машыны" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "IP адрас павiнен быць у фармаце 1.2.3.4" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Configure CUPS printing system" msgstr "Настройка сеткi" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "Эквадор" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Add an item" msgstr "Дадаць карыстальнiка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "China (Hong Kong)" msgstr "Сян Ган" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "Абалонка:" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "PCI" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "Азербайджанскі (latin)" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Package not installed" msgstr "Заканчэнне ўсталявання" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "Амэрыканскае Самоа" #: ../advertising/12-mdkexpert.pl:1 #, fuzzy, c-format msgid "Become a MandrakeExpert" msgstr "эксперт" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "Пратакол" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Copy fonts on your system" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Mandrake Terminal Server Configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Set the password minimum length and minimum number of digit and minimum " "number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 #: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 #: ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "Увага!" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote host name" msgstr "Аддалены вузел" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "Computing the size of the Windows partition" msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "/_Аднавіць" #: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 #: ../../standalone/drakxtv:1 #, fuzzy, c-format msgid "Italy" msgstr "Iтальянскi" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "Кайманавыя выспы" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "памылка разманцiравання %s: %s" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "Iмя друкаркi" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "disable" msgstr "Таблiца" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select model manually" msgstr "Аддалены прынтэр" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "Фарматаванне" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "" #: ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Load setting" msgstr "фарматаванне" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please " "choose the correct model from the list." msgstr "" #: ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Set selected printer as the default printer" msgstr "Жадаеце пратэсцiраваць друк?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Albanian" msgstr "Iранскi" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "Жамойція" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "Кампактна" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Detected model: %s %s" msgstr "Дубляванне пункту манцiравання %s" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../any.pm:1 #, fuzzy, c-format msgid "Local files" msgstr "Лакальны прынтэр" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "можа быць" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "Панама" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Can't open %s!" msgstr "Памылка адкрыцця %s для запiсу: %s" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "Манiтор" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " "a fault in the architecture of the Samba client software the password is put " "in clear text into the command line of the Samba client used to transmit the " "print job to the Windows server. So it is possible for every user on this " "machine to display the password on the screen by issuing commands as \"ps " "auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases " "you have to make sure that only machines from your local network have access " "to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account " "or a special account dedicated for printing. Do not remove the password " "protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD " "protocol. Then set up printing from this machine with the \"%s\" connection " "type in Printerdrake.\n" "\n" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "65 тысяч колераў (16 бiтаў)" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Remove fonts on your system" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "Запуск X пры старце сiстэмы" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "Недастаткова раздзелаў для RAID узроўня %d\n" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "local config: true" msgstr "Настройка X Window" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " "it." msgstr "" "Тут змяшчаюцца чэргi друку.\n" "Вы можаце дадаць яшчэ, альбо змянiць iснуючыя." #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Connected" msgstr "Iмя злучэння" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "Малі" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "" #: ../../install_steps_gtk.pm:1 #, fuzzy, c-format msgid "No details" msgstr "Падрабязнасцi" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "вельмi добра" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "Preview" msgstr "прылада" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Remote Control" msgstr "Аддалены прынтэр" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Please select media for backup..." msgstr "Калi ласка, абярыце мову для карыстання." #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 server: %s\n" msgstr "Сервер XFree86: %s\n" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "Грузiнскi (\"Руская\" раскладка)" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 #: ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "/_Налады" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Your printer model" msgstr "Аддалены прынтэр" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../advertising/04-configuration.pl:1 #, fuzzy, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, fuzzy, c-format msgid "Save" msgstr "Стартавае меню" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: ../../harddrake/data.pm:1 #, fuzzy, c-format msgid "Disk" msgstr "Дацкi" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Enter a printer device URI" msgstr "URI прынтэру" #: ../advertising/01-thanks.pl:1 #, c-format msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work of the " "worldwide Linux Community." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Israel" msgstr "Iўрыт" #: ../../lang.pm:1 #, fuzzy, c-format msgid "French Guiana" msgstr "Французскi" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "default:LTR" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Transfer printer configuration" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you want to enable printing on the printers mentioned above?\n" msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "%s (Port %s)" msgstr "Порт" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use network connection to backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../standalone/drakfloppy:1 #, fuzzy, c-format msgid "Kernel version" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "Прыняць карыстальнiка" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, fuzzy, c-format msgid "Server" msgstr "сервер" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " local network" msgstr "сеткавая карта не знойдзена" #: ../../interactive/stdio.pm:1 #, c-format msgid "Bad choice, try again\n" msgstr "Дрэнны выбар, паспрабуйце яшче\n" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, fuzzy, c-format msgid "Search new servers" msgstr "DNS сервер" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "Рэжым эксперту" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "" #: ../../network/network.pm:1 #, fuzzy, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "IP адрас павiнен быць у фармаце 1.2.3.4" #: ../../network/modem.pm:1 #, c-format msgid "" "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, fuzzy, c-format msgid "Looking at packages already installed..." msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Driver" msgstr "сервер" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "DVD-R device" msgstr "прылада" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printer on remote lpd server" msgstr "Аддалены сервер lpd" #: ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and " "install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may " "hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "Серада" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "Нямецкi" #: ../../crypto.pm:1 ../../lang.pm:1 #, fuzzy, c-format msgid "Austria" msgstr "паслядоўная" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "Няма мышы" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "Калi ласка, абярыце тып клавiятуры." #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "Згарнуць дрэва" #: ../../standalone/drakautoinst:1 #, fuzzy, c-format msgid "Auto Install Configurator" msgstr "Настройка пасля ўсталявання" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "Настройка сеткi" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "tape" msgstr "Тып: " #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (паслядоўная, стары тып C7)" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "Аднаўленне з файла %s не атрымалася: %s" #: ../../fsedit.pm:1 #, fuzzy, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" msgstr "" "Таблiца раздзелаў не чытаецца, яна занадта сапсаваная для меня :(\n" "Паспрабую iсцi далей i буду прапускаць дрэнныя раздзелы (Усе ДАДЕЗЕНЫЯ\n" "будуць страчаны!). Iншае рашэнне не дазволiць DrakX змянiць таблiцу " "раздзелаў.\n" "(памылка ў %s)\n" "\n" "Цi жадаеце страцiць усе раздзелы?\n" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Find Package" msgstr "%d пакетаў" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Are you sure that you want to set up printing on this machine?\n" msgstr "" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "New devfs device" msgstr "Прылада-шлюз" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Boot Style Configuration" msgstr "Настройка мадэму" #: ../../help.pm:1 #, fuzzy, c-format msgid "Automatic time synchronization" msgstr "Настройка мадэму" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "Армянскi (фанетычны)" #: ../../harddrake/v4l.pm:1 #, fuzzy, c-format msgid "Card model:" msgstr "Адрасы памяці карты (DMA)" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Start Server" msgstr "NIS сервер:" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "Туркменістан" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "All remote machines" msgstr "Аддалены прынтэр" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Install themes" msgstr "Усталяванне сiстэмы" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "Падрыхтоўка ўсталяваньня" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../standalone/drakTermServ:1 #, fuzzy, c-format msgid "Add User -->" msgstr "Дадаць карыстальнiка" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "Наўру" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "True Type fonts installation" msgstr "Падрыхтоўка ўсталяваньня" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "LAN configuration" msgstr "Настройка ADSL" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "hard disk model" msgstr "Адрасы памяці карты (DMA)" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless " "clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root " "filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "Mouse Systems" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "Iранскi" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Croatia" msgstr "Харвацкi" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "Шлюз:" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Add server" msgstr "Дадаць карыстальнiка" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Remote printer name" msgstr "Аддалены прынтэр" #: ../advertising/10-security.pl:1 #, c-format msgid "" "MandrakeSoft has designed exclusive tools to create the most secured Linux " "version ever: Draksec, a system security management tool, and a strong " "firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "Прылада:" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 #, fuzzy, c-format msgid "Printerdrake" msgstr "Прынтэр" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "Ліцэнзійная дамова" #: ../../standalone/draksec:1 #, fuzzy, c-format msgid "System Options" msgstr "Опцыi модулю:" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Please choose the desired security level" msgstr "Узровень бяспекi" #: ../../standalone/scannerdrake:1 #, c-format msgid "This host is already in the list, it cannot be added again.\n" msgstr "" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid ", USB printer" msgstr "Iмя друкаркi" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Incremental backups only save files that have changed or are new since the " "last backup." msgstr "" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Choose the applications that will support the fonts:" msgstr "Выбар раздзелаў для фарматавання" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "Настройка X Window" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "hd" msgstr "Чад" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "Турэцкi (традыцыёная \"F\" мадэль)" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 #: ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "Прыміце вiншаваннi!" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../security/l10n.pm:1 #, fuzzy, c-format msgid "Allow remote root login" msgstr "Аддалены прынтэр" #: ../../standalone/drakperm:1 #, fuzzy, c-format msgid "Down" msgstr "Зроблена" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../network/modem.pm:1 #, fuzzy, c-format msgid "Install rpm" msgstr "Усталёўка" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " "the command \"%s \" or a graphical printing tool: \"xpp \" or " "\"kprinter \". The graphical tools allow you to choose the printer and " "to modify the option settings easily.\n" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "Засталося часу " #: ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "UK клавiятура" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "Разманцiраваць" #: ../../mouse.pm:1 #, fuzzy, c-format msgid "Microsoft Explorer" msgstr "Microsoft IntelliMouse" #: ../../standalone/drakfont:1 #, fuzzy, c-format msgid "Uninstall Fonts" msgstr "Выдаленне выбраных RPM-пакетаў з сiстэмы" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Please wait, detecting and configuring devices..." msgstr "Настройкi ўзроўня бяспекi" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "Нямецкi (няма заблакiраваных клавiш)" #: ../../standalone/drakbackup:1 #, c-format msgid "\tSend mail to %s\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "32 тысячы колераў (15 бiтаў)" #: ../../any.pm:1 #, c-format msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "Гамбія" #: ../../standalone/drakbug:1 #, fuzzy, c-format msgid "Mandrake Control Center" msgstr "Далучэнне да Iнтэрнэту" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Reboot" msgstr "Root" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "\t-Tape \n" msgstr "Тып: " #: ../../standalone/drakhelp:1 #, c-format msgid "" "No browser is installed on your system, Please install one if you want to " "browse the help system" msgstr "" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Remember this password" msgstr "Няма паролю" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "" #: ../../standalone/drakgw:1 #, fuzzy, c-format msgid "Internet Connection Sharing is now enabled." msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма" #: ../../standalone/drakbackup:1 #, c-format msgid "\t-Network by SSH.\n" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../network/netconnect.pm:1 #, fuzzy, c-format msgid " cable" msgstr "Таблiца" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "%s found on %s, configure it automatically?" msgstr "Жадаеце настроiць прынтэр?" #: ../../Xconfig/various.pm:1 #, c-format msgid "XFree86 driver: %s\n" msgstr "Сервер XFree86: %s\n" #: ../../printer/printerdrake.pm:1 #, c-format msgid "This host/network is already in the list, it cannot be added again.\n" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "Выбар пакетаў для ўсталявання" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "Папуа Новая Гвінэя" #: ../../printer/main.pm:1 #, fuzzy, c-format msgid "Multi-function device on a parallel port" msgstr "Iмя прынтэру" #: ../../../move/tree/mdk_totem:1 #, fuzzy, c-format msgid "Busy files" msgstr "Дрэнны файл рэзервовай копii" #: ../../keyboard.pm:1 #, fuzzy, c-format msgid "Serbian (cyrillic)" msgstr "Азербайджанскі (кірыліца)" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Enter the directory where backups are stored" msgstr "Калі ласка, зрабіце некалькі рухаў мышшу." #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "Жадаеце пратэсцiраваць друк?" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "Стварэнне загрузачнай дыскеты" #: ../../standalone/net_monitor:1 #, fuzzy, c-format msgid "Wait please, testing your connection..." msgstr "Якi тып вашага ISDN злучэння?" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "Адлучэнне ад сеткi" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "Iмя (login ID)" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" "NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n" "сеткi. Гэтая служба ўплывае на наяўнасць сувязi памiж NFS файламi." #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <" "tvignaud@mandrakesoft.com>\n" "\n" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Printing/Scanning on \"%s\"" msgstr "Адлучэнне ад сеткi" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" "lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n" "сервер, якi кiруе працай прынтэру(аў)." #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "Нядзеля" #: ../../standalone/drakconnect:1 #, fuzzy, c-format msgid "Internet Connection Configuration" msgstr "Iнтэрнэт злучэнне i канфiгурацыя" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Once you've selected a device, you'll be able to see the device information " "in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../install_interactive.pm:1 #, fuzzy, c-format msgid "I can't find any room for installing" msgstr "Дадаць раздзел немагчыма" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Default printer" msgstr "Лакальны прынтэр" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "Змянiць RAID" #: ../../network/isdn.pm:1 #, c-format msgid "" "I have detected an ISDN PCI card, but I don't know its type. Please select a " "PCI card on the next screen." msgstr "" "Вызначана ISDN PCI карта, але невядомы яе тып. Калi ласка, пазначце PCI " "карту на наступным экране." #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "Дадаць карыстальнiка" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "RAID-disks %s\n" msgstr "RAID-дыскi %s\n" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Liberia" msgstr "паслядоўная" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "Выбар клавiятуры" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "Фарматаванне раздзелаў" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Automatic correction of CUPS configuration" msgstr "Настройка мадэму" #: ../../standalone/harddrake2:1 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "Чытаю базу дадзеных драйвероў CUPS" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scanner sharing to hosts: " msgstr "Прынтэр" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "Iмя файлу вiртуальнай файлавай сiстэмы: %s" #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "Да якога паслядоўнага порту далучаны мадэм?" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../help.pm:1 #, fuzzy, c-format msgid "Delay before booting the default image" msgstr "Затрымка перад загрузкай вобразу па дамаўленню" #: ../../standalone/drakbackup:1 #, fuzzy, c-format msgid "Use Hard Disk to backup" msgstr "Дрэнны файл рэзервовай копii" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Configure" msgstr "Настройка X Window" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Scannerdrake" msgstr "Абярыце вiдэакарту" #: ../../standalone/drakconnect:1 #, c-format msgid "" "Warning, another Internet connection has been detected, maybe using your " "network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" "Увядзiце iмя сваёй машыны (host).\n" "Iмя вашай машыны павiнна быць зададзена поўнасцю,\n" "напрыклад ``mybox.mylab.myco.com''.\n" "Вы можаце таксама ўвесцi IP адрас шлюзу, калi ён у вас ёсць." #: ../../printer/printerdrake.pm:1 #, fuzzy, c-format msgid "Select Printer Spooler" msgstr "Выбар тыпу злучэння прынтэру" #: ../../standalone/drakboot:1 #, fuzzy, c-format msgid "Create new theme" msgstr "Стварэнне новага раздзелу" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/drakpxe:1 #, fuzzy, c-format msgid "No image found" msgstr "Лакальны прынтэр" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "Некаторыя важныя пакеты не былi ўсталяваны карэктна.\n" "Другi ваш cdrom дыск цi ваш cdrom маюць дэфекты.\n" "Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl Mandrake/RPMS/*." "rpm\"\n" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "" #: ../../standalone/scannerdrake:1 #, fuzzy, c-format msgid "Detected model: %s" msgstr "Дубляванне пункту манцiравання %s" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../lang.pm:1 #, fuzzy, c-format msgid "Azerbaijan" msgstr "Iранскi" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome " "frontend)\n" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "Dvorak (US)" #: ../../standalone/harddrake2:1 #, c-format msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "Як прынтар далучаны?" #: ../../security/level.pm:1 #, fuzzy, c-format msgid "Security level" msgstr "Настройкi ўзроўня бяспекi" #: ../../standalone/draksplash:1 #, fuzzy, c-format msgid "final resolution" msgstr "Памеры экрану" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, fuzzy, c-format msgid "Services" msgstr "прылада" #: ../../../move/move.pm:1 #, fuzzy, c-format msgid "Auto configuration" msgstr "Настройка" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "4 Мб" #: ../../share/compssUsers:999 #, fuzzy msgid "Office Workstation" msgstr "Навуковыя прыкладанні" #: ../../share/compssUsers:999 msgid "" "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " "gnumeric), pdf viewers, etc" msgstr "" "Офісныя праграмы: працэсары словаў (kword, abiword), электроныя табліцы, " "аглядальнікі pdf-файлаў, і г.д." #: ../../share/compssUsers:999 #, fuzzy msgid "Game station" msgstr "Мультымедыя - гук" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "Забаўляльныя праграмы: аркады, стратэгіі і г.д." #: ../../share/compssUsers:999 #, fuzzy msgid "Multimedia station" msgstr "Мультымедыя - гук" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "Рэдактары і прайгравальнікі гуку і відэа" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet station" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../share/compssUsers:999 #, fuzzy msgid "" "Set of tools to read and send mail and news (mutt, tin..) and to browse the " "Web" msgstr "" "Прыкладанні для чытання і адпраўкі пошты і навінаў (pine, mutt, tin...), " "Web аглядальнікі" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer (client)" msgstr "Сеткавы прынтэр (socket)" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Configuration" msgstr "Настройка" #: ../../share/compssUsers:999 #, fuzzy msgid "Tools to ease the configuration of your computer" msgstr "Цi жадаеце пратэсцiраваць настройкi?" #: ../../share/compssUsers:999 #, fuzzy msgid "Scientific Workstation" msgstr "Навуковыя прыкладанні" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "Кансольныя інструментальныя сродкі" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "Рэдактары, абалонкі, тэрміналы" #: ../../share/compssUsers:999 #, fuzzy msgid "KDE Workstation" msgstr "Навуковыя прыкладанні" #: ../../share/compssUsers:999 msgid "" "The K Desktop Environment, the basic graphical environment with a collection " "of accompanying tools" msgstr "" "The K Desktop Environment - асноўнае графічнае асяродзе з калекцыяй " "інструментальных сродкаў" #: ../../share/compssUsers:999 #, fuzzy msgid "Gnome Workstation" msgstr "Навуковыя прыкладанні" #: ../../share/compssUsers:999 msgid "" "A graphical environment with user-friendly set of applications and desktop " "tools" msgstr "" "Графічнае асяродзе са зручным дзеля выкарыстання наборам прыкладанняў і " "інструментальных сродкаў" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "Іншыя графічныя Працоўныя сталы" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "Бібліятэкі і праграмы для распрацоўкі на С і С++" #: ../../share/compssUsers:999 #, fuzzy msgid "Documentation" msgstr "Аўтэнтыфiкацыя" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "нігі і Howto па Linux і Free Software" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Mail" msgstr "Пошта" #: ../../share/compssUsers:999 #, fuzzy msgid "Postfix mail server" msgstr "Сервер друку" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Internet gateway" msgstr "Настройка злучэння з Iнтэрнэтам" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Network Computer server" msgstr "Сеткавы прынтэр (socket)" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 #, fuzzy msgid "Set of tools to read and send mail and news and to browse the Web" msgstr "" "Прыкладанні для чытання і адпраўкі пошты і навінаў (pine, mutt, tin...), " "Web аглядальнікі" #, fuzzy #~ msgid "Profile " #~ msgstr "памылка манцiравання: " #, fuzzy #~ msgid "" #~ "Welcome to the Internet Connection Sharing utility!\n" #~ "\n" #~ "%s\n" #~ "\n" #~ "Click on Configure to launch the setup wizard." #~ msgstr "Сумеснае Iнтэрнэт-злучэнне" #, fuzzy #~ msgid "Internet Connection Sharing configuration" #~ msgstr "Iнтэрнэт злучэнне i канфiгурацыя" #, fuzzy #~ msgid "No Internet Connection Sharing has ever been configured." #~ msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма" #, fuzzy #~ msgid "Hostname configuration" #~ msgstr "Настройка" #, fuzzy #~ msgid "Hostname" #~ msgstr "Iмя машыны" #, fuzzy #~ msgid "Remote Printers" #~ msgstr "Аддалены прынтэр" #, fuzzy #~ msgid "Level 1" #~ msgstr "узровень" #, fuzzy #~ msgid "Level 2" #~ msgstr "узровень" #, fuzzy #~ msgid "Level 3" #~ msgstr "узровень" #, fuzzy #~ msgid "Level 4" #~ msgstr "узровень" #, fuzzy #~ msgid "Level 5" #~ msgstr "узровень" #, fuzzy #~ msgid "Insert floppy and press %s" #~ msgstr "Устаўце дыскету ў дыскавод %s" #~ msgid "Load" #~ msgstr "Загрузіць" #, fuzzy #~ msgid "Bad Ip" #~ msgstr "IO карты" #~ msgid "Please relog into %s to activate the changes" #~ msgstr "Калi ласка, перайдзiце ў %s для актывацыi змяненняў" #~ msgid "Wizard..." #~ msgstr "Майстар стварэння..." #~ msgid "Name: %s\n" #~ msgstr "Iмя: %s\n" #~ msgid "Internet connection & configuration" #~ msgstr "Iнтэрнэт злучэнне i канфiгурацыя" #~ msgid "" #~ "\n" #~ "You can disconnect or reconfigure your connection." #~ msgstr "" #~ "\n" #~ "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне." #~ msgid "Set of tools for mail, news, web, file transfer, and chat" #~ msgstr "" #~ "Набор інструментаў для пошты, навінаў, web'у, перадачы файлаў, і chat" #~ msgid "Games" #~ msgstr "Забавы" #~ msgid "Multimedia - Graphics" #~ msgstr "Мультымедыя - Графіка" #~ msgid "Multimedia - Sound" #~ msgstr "Мультымедыя - гук" #~ msgid "Audio-related tools: mp3 or midi players, mixers, etc" #~ msgstr "Аўдыёсродкі: прайгравальнікі mp3 і midi, мікшары і г.д." #~ msgid "Multimedia - Video" #~ msgstr "Мультымедыя - відэа" #~ msgid "Video players and editors" #~ msgstr "Рэдактары і прайгравальнікі відэа" #~ msgid "Multimedia - CD Burning" #~ msgstr "Мультымедыя - Стварэнне CD" #~ msgid "Tools to create and burn CD's" #~ msgstr "Інструментальныя сродкі стварэньня CD" #~ msgid "More Graphical Desktops (Gnome, IceWM)" #~ msgstr "Шмат графічных мэнаджэраў Працоўных сталоў(Gnome, IceWM)" #~ msgid "Personal Information Management" #~ msgstr "Мэнаджар асабістай інфармацыі" #~ msgid "Tools for your Palm Pilot or your Visor" #~ msgstr "Інструментальныя сродкі для Palm Pilot і Visor" #~ msgid "Personal Finance" #~ msgstr "Персанальныя фінансы" #~ msgid "Programs to manage your finances, such as gnucash" #~ msgstr "Праграмы кіравання вашымі фінансамі, тыпу gnucash" #~ msgid "no network card found" #~ msgstr "сеткавая карта не знойдзена" #~ msgid "" #~ "Please enter your host name if you know it.\n" #~ "Some DHCP servers require the hostname to work.\n" #~ "Your host name should be a fully-qualified host name,\n" #~ "such as ``mybox.mylab.myco.com''." #~ msgstr "" #~ "Увядзiце iмя сваёй машыны (host).\n" #~ "Iмя вашай машыны павiнна быць зададзена поўнасцю,\n" #~ "напрыклад ``mybox.mylab.myco.com''.\n" #~ "Вы можаце таксама ўвесцi IP адрас шлюзу, калi ён у вас ёсць." #~ msgid "" #~ "The partition you've selected to add as root (/) is physically located " #~ "beyond\n" #~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" #~ "If you plan to use the LILO boot manager, be careful to add a /boot " #~ "partition" #~ msgstr "" #~ "Абраны для дадатку ў якасцi каранёвага (/) раздзел фiзiчна знаходзiца " #~ "далей\n" #~ "1024-га цылiндру жорсткага дыску, а ў вас няма раздзелу /boot .\n" #~ "Калi будзе выкарыстоўвацца дыспечар загрузкi LILO, не запамятайце дадаць\n" #~ "раздзел /boot" #~ msgid "" #~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder " #~ "> 1024).\n" #~ "Either you use LILO and it won't work, or you don't use LILO and you " #~ "don't need /boot" #~ msgstr "" #~ "Прабачце, але нельга стварыць /boot на гэтым дыску (на цылiндры > 1024).\n" #~ "Калі вы думаеце выкарыстоўваць LILO - тады гэта не будзе працаваць, LILO " #~ "не выкарыстоўваеца, тады /boot не патрэбны." #~ msgid "Please be patient. This operation can take several minutes." #~ msgstr "Калі ласка, пачакайце. Гэтая аперацыя адыме пэўны час." #~ msgid "Test ports" #~ msgstr "Праверка партоў" 3289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13391 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619 13620 13621 13622 13623 13624 13625 13626 13627 13628 13629 13630 13631 13632 13633 13634 13635 13636 13637 13638 13639 13640 13641 13642 13643 13644 13645 13646 13647 13648 13649 13650 13651 13652 13653 13654 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677 13678 13679 13680 13681 13682 13683 13684 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696 13697 13698 13699 13700 13701 13702 13703 13704 13705 13706 13707 13708 13709 13710 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784 13785 13786 13787 13788 13789 13790 13791 13792 13793 13794 13795 13796 13797 13798 13799 13800 13801 13802 13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13821 13822 13823 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878 13879 13880 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13892 13893 13894 13895 13896 13897 13898 13899 13900 13901 13902 13903 13904 13905 13906 13907 13908 13909 13910 13911 13912 13913 13914 13915 13916 13917 13918 13919 13920 13921 13922 13923 13924 13925 13926 13927 13928 13929 13930 13931 13932 13933 13934 13935 13936 13937 13938 13939 13940 13941 13942 13943 13944 13945 13946 13947 13948 13949 13950 13951 13952 13953 13954 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13983 13984 13985 13986 13987 13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13998 13999 14000 14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025 14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101 14102 14103 14104 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114 14115 14116 14117 14118 14119 14120 14121 14122 14123 14124 14125 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 14150 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222 14223 14224 14225 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273 14274 14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 14316 14317 14318 14319 14320 14321 14322 14323 14324 14325 14326 14327 14328 14329 14330 14331 14332 14333 14334 14335 14336 14337 14338 14339 14340 14341 14342 14343 14344 14345 14346 14347 14348 14349 14350 14351 14352 14353 14354 14355 14356 14357 14358 14359 14360 14361 14362 14363 14364 14365 14366 14367 14368 14369 14370 14371 14372 14373 14374 14375 14376 14377 14378 14379 14380 14381 14382 14383 14384 14385 14386 14387 14388 14389 14390 14391 14392 14393 14394 14395 14396 14397 14398 14399 14400 14401 14402 14403 14404 14405 14406 14407 14408 14409 14410 14411 14412 14413 14414 14415 14416 14417 14418 14419 14420 14421 14422 14423 14424 14425 14426 14427 14428 14429 14430 14431 14432 14433 14434 14435 14436 14437 14438 14439 14440 14441 14442 14443 14444 14445 14446 14447 14448 14449 14450 14451 14452 14453 14454 14455 14456 14457 14458 14459 14460 14461 14462 14463 14464 14465 14466 14467 14468 14469 14470 14471 14472 14473 14474 14475 14476 14477 14478 14479 14480 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592 14593 14594 14595 14596 14597 14598 14599 14600 14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14623 14624 14625 14626 14627 14628 14629 14630 14631 14632 14633 14634 14635 14636 14637 14638 14639 14640 14641 14642 14643 14644 14645 14646 14647 14648 14649 14650 14651 14652 14653 14654 14655 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681 14682 14683 14684 14685 14686 14687 14688 14689 14690 14691 14692 14693 14694 14695 14696 14697 14698 14699 14700 14701 14702 14703 14704 14705 14706 14707 14708 14709 14710 14711 14712 14713 14714 14715 14716 14717 14718 14719 14720 14721 14722 14723 14724 14725 14726 14727 14728 14729 14730 14731 14732 14733 14734 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746 14747 14748 14749 14750 14751 14752 14753 14754 14755 14756 14757 14758 14759 14760 14761 14762 14763 14764 14765 14766 14767 14768 14769 14770 14771 14772 14773 14774 14775 14776 14777 14778 14779 14780 14781 14782 14783 14784 14785 14786 14787 14788 14789 14790 14791 14792 14793 14794 14795 14796 14797 14798 14799 14800 14801 14802 14803 14804 14805 14806 14807 14808 14809 14810 14811 14812 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14823 14824 14825 14826 14827 14828 14829 14830 14831 14832 14833 14834 14835 14836 14837 14838 14839 14840 14841 14842 14843 14844 14845 14846 14847 14848 14849 14850 14851 14852 14853 14854 14855 14856 14857 14858 14859 14860 14861 14862 14863 14864 14865 14866 14867 14868 14869 14870 14871 14872 14873 14874 14875 14876 14877 14878 14879 14880 14881 14882 14883 14884 14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902 14903 14904 14905 14906 14907 14908 14909 14910 14911 14912 14913 14914 14915 14916 14917 14918 14919 14920 14921 14922 14923 14924 14925 14926 14927 14928 14929 14930 14931 14932 14933 14934 14935 14936 14937 14938 14939 14940 14941 14942 14943 14944 14945 14946 14947 14948 14949 14950 14951 14952 14953 14954 14955 14956 14957 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973 14974 14975 14976 14977 14978 14979 14980 14981 14982 14983 14984 14985 14986 14987 14988 14989 14990 14991 14992 14993 14994 14995 14996 14997 14998 14999 15000 15001 15002 15003 15004 15005 15006 15007 15008 15009 15010 15011 15012 15013 15014 15015 15016 15017 15018 15019 15020 15021 15022 15023 15024 15025 15026 15027 15028 15029 15030 15031 15032 15033 15034 15035 15036 15037 15038 15039 15040 15041 15042 15043 15044 15045 15046 15047 15048 15049 15050 15051 15052 15053 15054 15055 15056 15057 15058 15059 15060 15061 15062 15063 15064 15065 15066 15067 15068 15069 15070 15071 15072 15073 15074 15075 15076 15077 15078 15079 15080 15081 15082 15083 15084 15085 15086 15087 15088 15089 15090 15091 15092 15093 15094 15095 15096 15097 15098 15099 15100 15101 15102 15103 15104 15105 15106 15107 15108 15109 15110 15111 15112 15113 15114 15115 15116 15117 15118 15119 15120 15121 15122 15123 15124 15125 15126 15127 15128 15129 15130 15131 15132 15133 15134 15135 15136 15137 15138 15139 15140 15141 15142 15143 15144 15145 15146 15147 15148 15149 15150 15151 15152 15153 15154 15155 15156 15157 15158 15159 15160 15161 15162 15163 15164 15165 15166 15167 15168 15169 15170 15171 15172 15173 15174 15175 15176 15177 15178 15179 15180 15181 15182 15183 15184 15185 15186 15187 15188 15189 15190 15191 15192 15193 15194 15195 15196 15197 15198 15199 15200 15201 15202 15203 15204 15205 15206 15207 15208 15209 15210 15211 15212 15213 15214 15215 15216 15217 15218 15219 15220 15221 15222 15223 15224 15225 15226 15227 15228 15229 15230 15231 15232 15233 15234 15235 15236 15237 15238 15239 15240 15241 15242 15243 15244 15245 15246 15247 15248 15249 15250 15251 15252 15253 15254 15255 15256 15257 15258 15259 15260 15261 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 15284 15285 15286 15287 15288 15289 15290 15291 15292 15293 15294 15295 15296 15297 15298 15299 15300 15301 15302 15303 15304 15305 15306 15307 15308 15309 15310 15311 15312 15313 15314 15315 15316 15317 15318 15319 15320 15321 15322 15323 15324 15325 15326 15327 15328 15329 15330 15331 15332 15333 15334 15335 15336 15337 15338 15339 15340 15341 15342 15343 15344 15345 15346 15347 15348 15349 15350 15351 15352 15353 15354 15355 15356 15357 15358 15359 15360 15361 15362 15363 15364 15365 15366 15367 15368 15369 15370 15371 15372 15373 15374 15375 15376 15377 15378 15379 15380 15381 15382 15383 15384 15385 15386 15387 15388 15389 15390 15391 15392 15393 15394 15395 15396 15397 15398 15399 15400 15401 15402 15403 15404 15405 15406 15407 15408 15409 15410 15411 15412 15413 15414 15415 15416 15417 15418 15419 15420 15421 15422 15423 15424 15425 15426 15427 15428 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 15440 15441 15442 15443 15444 15445 15446 15447 15448 15449 15450 15451 15452 15453 15454 15455 15456 15457 15458 15459 15460 15461 15462 15463 15464 15465 15466 15467 15468 15469 15470 15471 15472 15473 15474 15475 15476 15477 15478 15479 15480 15481 15482 15483 15484 15485 15486 15487 15488 15489 15490 15491 15492 15493 15494 15495 15496 15497 15498 15499 15500 15501 15502 15503 15504 15505 15506 15507 15508 15509 15510 15511 15512 15513 15514 15515 15516 15517 15518 15519 15520 15521 15522 15523 15524 15525 15526 15527 15528 15529 15530 15531 15532 15533 15534 15535 15536 15537 15538 15539 15540 15541 15542 15543 15544 15545 15546 15547 15548 15549 15550 15551 15552 15553 15554 15555 15556 15557 15558 15559 15560 15561 15562 15563 15564 15565 15566 15567 15568 15569 15570 15571 15572 15573 15574 15575 15576 15577 15578 15579 15580 15581 15582 15583 15584 15585 15586 15587 15588 15589 15590 15591 15592 15593 15594 15595 15596 15597 15598 15599 15600 15601 15602 15603 15604 15605 15606 15607 15608 15609 15610 15611 15612 15613 15614 15615 15616 15617 15618 15619 15620 15621 15622 15623 15624 15625 15626 15627 15628 15629 15630 15631 15632 15633 15634 15635 15636 15637 15638 15639 15640 15641 15642 15643 15644 15645 15646 15647 15648 15649 15650 15651 15652 15653 15654 15655 15656 15657 15658 15659 15660 15661 15662 15663 15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15684 15685 15686 15687 15688 15689 15690 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703 15704 15705 15706 15707 15708 15709 15710 15711 15712 15713 15714 15715 15716 15717 15718 15719 15720 15721 15722 15723 15724 15725 15726 15727 15728 15729 15730 15731 15732 15733 15734 15735 15736 15737 15738 15739 15740 15741 15742 15743 15744 15745 15746 15747 15748 15749 15750 15751 15752 15753 15754 15755 15756 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773 15774 15775 15776 15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796 15797 15798 15799 15800 15801 15802 15803 15804 15805 15806 15807 15808 15809 15810 15811 15812 15813 15814 15815 15816 15817 15818 15819 15820 15821 15822 15823 15824 15825 15826 15827 15828 15829 15830 15831 15832 15833 15834 15835 15836 15837 15838 15839 15840 15841 15842 15843 15844 15845 15846 15847 15848 15849 15850 15851 15852 15853 15854 15855 15856 15857 15858 15859 15860 15861 15862 15863 15864 15865 15866 15867 15868 15869 15870 15871 15872 15873 15874 15875 15876 15877 15878 15879 15880 15881 15882 15883 15884 15885 15886 15887 15888 15889 15890 15891 15892 15893 15894 15895 15896 15897 15898 15899 15900 15901 15902 15903 15904 15905 15906 15907 15908 15909 15910 15911 15912 15913 15914 15915 15916 15917 15918 15919 15920 15921 15922 15923 15924 15925 15926 15927 15928 15929 15930 15931 15932 15933 15934 15935 15936 15937 15938 15939 15940 15941 15942 15943 15944 15945 15946 15947 15948 15949 15950 15951 15952 15953 15954 15955 15956 15957 15958 15959 15960 15961 15962 15963 15964 15965 15966 15967 15968 15969 15970 15971 15972 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984 15985 15986 15987 15988 15989 15990 15991 15992 15993 15994 15995 15996 15997 15998 15999 16000 16001 16002 16003 16004 16005 16006 16007 16008 16009 16010 16011 16012 16013 16014 16015 16016 16017 16018 16019 16020 16021 16022 16023 16024 16025 16026 16027 16028 16029 16030 16031 16032 16033 16034 16035 16036 16037 16038 16039 16040 16041 16042 16043 16044 16045 16046 16047 16048 16049 16050 16051 16052 16053 16054 16055 16056 16057 16058 16059 16060 16061 16062 16063 16064 16065 16066 16067 16068 16069 16070 16071 16072 16073 16074 16075 16076 16077 16078 16079 16080 16081 16082 16083 16084 16085 16086 16087 16088 16089 16090 16091 16092 16093 16094 16095 16096 16097 16098 16099 16100 16101 16102 16103 16104 16105 16106 16107 16108 16109 16110 16111 16112 16113 16114 16115 16116 16117 16118 16119 16120 16121 16122 16123 16124 16125 16126 16127 16128 16129 16130 16131 16132 16133 16134 16135 16136 16137 16138 16139 16140 16141 16142 16143 16144 16145 16146 16147 16148 16149 16150 16151 16152 16153 16154 16155 16156 16157 16158 16159 16160 16161 16162 16163 16164 16165 16166 16167 16168 16169 16170 16171 16172 16173 16174 16175 16176 16177 16178 16179 16180 16181 16182 16183 16184 16185 16186 16187 16188 16189 16190 16191 16192 16193 16194 16195 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 16220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16237 16238 16239 16240 16241 16242 16243 16244 16245 16246 16247 16248 16249 16250 16251 16252 16253 16254 16255 16256 16257 16258 16259 16260 16261 16262 16263 16264 16265 16266 16267 16268 16269 16270 16271 16272 16273 16274 16275 16276 16277 16278 16279 16280 16281 16282 16283 16284 16285 16286 16287 16288 16289 16290 16291 16292 16293 16294 16295 16296 16297 16298 16299 16300 16301 16302 16303 16304 16305 16306 16307 16308 16309 16310 16311 16312 16313 16314 16315 16316 16317 16318 16319 16320 16321 16322 16323 16324 16325 16326 16327 16328 16329 16330 16331 16332 16333 16334 16335 16336 16337 16338 16339 16340 16341 16342 16343 16344 16345 16346 16347 16348 16349 16350 16351 16352 16353 16354 16355 16356 16357 16358 16359 16360 16361 16362 16363 16364 16365 16366 16367 16368 16369 16370 16371 16372 16373 16374 16375 16376 16377 16378 16379 16380 16381 16382 16383 16384 16385 16386 16387 16388 16389 16390 16391 16392 16393 16394 16395 16396 16397 16398 16399 16400 16401 16402 16403 16404 16405 16406 16407 16408 16409 16410 16411 16412 16413 16414 16415 16416 16417 16418 16419 16420 16421 16422 16423 16424 16425 16426 16427 16428 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 16440 16441 16442 16443 16444 16445 16446 16447 16448 16449 16450 16451 16452 16453 16454 16455 16456 16457 16458 16459 16460 16461 16462 16463 16464 16465 16466 16467 16468 16469 16470 16471 16472 16473 16474 16475 16476 16477 16478 16479 16480 16481 16482 16483 16484 16485 16486 16487 16488 16489 16490 16491 16492 16493 16494 16495 16496 16497 16498 16499 16500 16501 16502 16503 16504 16505 16506 16507 16508 16509 16510 16511 16512 16513 16514 16515 16516 16517 16518 16519 16520 16521 16522 16523 16524 16525 16526 16527 16528 16529 16530 16531 16532 16533 16534 16535 16536 16537 16538 16539 16540 16541 16542 16543 16544 16545 16546 16547 16548 16549 16550 16551 16552 16553 16554 16555 16556 16557 16558 16559 16560 16561 16562 16563 16564 16565 16566 16567 16568 16569 16570 16571 16572 16573 16574 16575 16576 16577 16578 16579 16580 16581 16582 16583 16584 16585 16586 16587 16588 16589 16590 16591 16592 16593 16594 16595 16596 16597 16598 16599 16600 16601 16602 16603 16604 16605 16606 16607 16608 16609 16610 16611 16612 16613 16614 16615 16616 16617 16618 16619 16620 16621 16622 16623 16624 16625 16626 16627 16628 16629 16630 16631 16632 16633 16634 16635 16636 16637 16638 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380 20381 20382 20383 20384 20385 20386 20387 20388 20389 20390 20391 20392 20393 20394 20395 20396 20397 20398 20399 20400 20401 20402 20403 20404 20405 20406 20407 20408 20409 20410 20411 20412 20413 20414 20415 20416 20417 20418 20419 20420 20421 20422 20423 20424 20425 20426 20427 20428 20429 20430 20431 20432 20433 20434 20435 20436 20437 20438 20439 20440 20441 20442 20443 20444 20445 20446 20447 20448 20449 20450 20451 20452 20453 20454 20455 20456 20457 20458 20459 20460 20461 20462 20463 20464 20465 20466 20467 20468 20469 20470 20471 20472 20473 20474 20475 20476 20477 20478 20479 20480 20481 20482 20483 20484 20485 20486 20487 20488 20489 20490 20491 20492 20493 20494 20495 20496 20497 20498 20499 20500 20501 20502 20503 20504 20505 20506 20507 20508 20509 20510 20511 20512 20513 20514 20515 20516 20517 20518 20519 20520 20521 20522 20523 20524 20525 20526 20527 20528 20529 20530 20531 20532 20533 20534 20535 20536 20537 20538 20539 20540 20541 20542 20543 20544 20545 20546 20547 20548 20549 20550 20551 20552 20553 20554 20555 20556 20557 20558 20559 20560 20561 20562 20563 20564 20565 20566 20567 20568 20569 20570 20571 20572 20573 20574 20575 20576 20577 20578 20579 20580 20581 20582 20583 20584 20585 20586 20587 20588 20589 20590 20591 20592 20593 20594 20595 20596 20597 20598 20599 20600 20601 20602 20603 20604 20605 20606 20607 20608 20609 20610 20611 20612 20613 20614 20615 20616 20617 20618 20619 20620 20621 20622 20623 20624 20625 20626 20627 20628 20629 20630 20631 20632 20633 20634 20635 20636 20637 20638 20639 20640 20641 20642 20643 20644 20645 20646 20647 20648 20649 20650 20651 20652 20653 20654 20655 20656 20657 20658 20659 20660 20661 20662 20663 20664 20665 20666 20667 20668 20669 20670 20671 20672 20673 20674 20675 20676 20677 20678 20679 20680 20681 20682 20683 20684 20685 20686 20687 20688 20689 20690 20691 20692 20693 20694 20695 20696 20697 20698 20699 20700 20701 20702 20703 20704 20705 20706 20707 20708 20709 20710 20711 20712 20713 20714 20715 20716 20717 20718 20719 20720 20721 20722 20723 20724 20725 20726 20727 20728 20729 20730 20731 20732 20733 20734 20735 20736 20737 20738 20739 20740 20741 20742 20743 20744 20745 20746 20747 20748 20749 20750 20751 20752 20753 20754 20755 20756 20757 20758 20759 20760 20761 20762 20763 20764 20765 20766 20767 20768 20769 20770 20771 20772 20773 20774 20775 20776 20777 20778 20779 20780 20781 20782 20783 20784 20785 20786 20787 20788 20789 20790 20791 20792 20793 20794 20795 20796 20797 20798 20799 20800 20801 20802 20803 20804 20805 20806 20807 20808 20809 20810 20811 20812 20813 20814 20815 20816 20817 20818 20819 20820 20821 20822 20823 20824 20825 20826 20827 20828 20829 20830 20831 20832 20833 20834 20835 20836 20837 20838 20839 20840 20841 20842 20843 20844 20845 20846 20847 20848 20849 20850 20851 20852 20853 20854 20855 20856 20857 20858 20859 20860 20861 20862 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877 20878 20879 20880 20881 20882 20883 20884 20885 20886 20887 20888 20889 20890 20891 20892 20893 20894 20895 20896 20897 20898 20899 20900 20901 20902 20903 20904 20905 20906 20907 20908 20909 20910 20911 20912 20913 20914 20915 20916 20917 20918 20919 20920 20921 20922 20923 20924 20925 20926 20927 20928 20929 20930 20931 20932 20933 20934 20935 20936 20937 20938 20939 20940 20941 20942 20943 20944 20945 20946 20947 20948 20949 20950 20951 20952 20953 20954 20955 20956 20957 20958 20959 20960 20961 20962 20963 20964 20965 20966 20967 20968 20969 20970 20971 20972 20973 20974 20975 20976 20977 20978 20979 20980 20981 20982 20983 20984 20985 20986 20987 20988 20989 20990 20991 20992 20993 20994 20995 20996 20997 20998 20999 21000 21001 21002 21003 21004 21005 21006 21007 21008 21009 21010 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21032 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21043 21044 21045 21046 21047 21048 21049 21050 21051 21052 21053 21054 21055 21056 21057 21058 21059 21060 21061 21062 21063 21064 21065 21066 21067 21068 21069 21070 21071 21072 21073 21074 21075 21076 21077 21078 21079 21080 21081 21082 21083 21084 21085 21086 21087 21088 21089 21090 21091 21092 21093 21094 21095 21096 21097 21098 21099 21100 21101 21102 21103 21104 21105 21106 21107 21108 21109 21110 21111 21112 21113 21114 21115 21116 21117 21118 21119 21120 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 21131 21132 21133 21134 21135 21136 21137 21138 21139 21140 21141 21142 21143 21144 21145 21146 21147 21148 21149 21150 21151 21152 21153 21154 21155 21156 21157 21158 21159 21160 21161 21162 21163 21164 21165 21166 21167 21168 21169 21170 21171 21172 21173 21174 21175 21176 21177 21178 21179 21180 21181 21182 21183 21184 21185 21186 21187 21188 21189 21190 21191 21192 21193 21194 21195 21196 21197 21198 21199 21200 21201 21202 21203 21204 21205 21206 21207 21208 21209 21210 21211 21212 21213 21214 21215 21216 21217 21218 21219 21220 21221 21222 21223 21224 21225 21226 21227 21228 21229 21230 21231 21232 21233 21234 21235 21236 21237 21238 21239 21240 21241 21242 21243 21244 21245 21246 21247 21248 21249 21250 21251 21252 21253 21254 21255 21256 21257 21258 21259 21260 21261 21262 21263 21264 21265 21266 21267 21268 21269 21270 21271 21272 21273 21274 21275 21276 21277 21278 21279 21280 21281 21282 21283 21284 21285 21286 21287 21288 21289 21290 21291 21292 21293 21294 21295 21296 21297 21298 21299 21300 21301 21302 21303 21304 21305 21306 21307 21308 21309 21310 21311 21312 21313 21314 21315 21316 21317 21318 21319 21320 21321 21322 21323 21324 21325 21326 21327 21328 21329 21330 21331 21332 21333 21334 21335 21336 21337 21338 21339 21340 21341 21342 21343 21344 21345 21346 21347 21348 21349 21350 21351 21352 21353 21354 21355 21356 21357 21358 21359 21360 21361 21362 21363 21364 21365 21366 21367 21368 21369 21370 21371 21372 21373 21374 21375 21376 21377 21378 21379 21380 21381 21382 21383 21384 21385 21386 21387 21388 21389 21390 21391 21392 21393 21394 21395 21396 21397 21398 21399 21400 21401 21402 21403 21404 21405 21406 21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417 21418 21419 21420 21421 21422 21423 21424 21425 21426 21427 21428 21429 21430 21431 21432 21433 21434 21435 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21449 21450 21451 21452 21453 21454 21455 21456 21457 21458 21459 21460 21461 21462 21463 21464 21465 21466 21467 21468 21469 21470 21471 21472 21473 21474 21475 21476 21477 21478 21479 21480 21481 21482 21483 21484 21485 21486 21487 21488 21489 21490 21491 21492 21493 21494 21495 21496 21497 21498 21499 21500 21501 21502 21503 21504 21505 21506 21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517 21518 21519 21520 21521 21522 21523 21524 21525 21526 21527 21528 21529 21530 21531 21532 21533 21534 21535 21536 21537 21538 21539 21540 21541 21542 21543 21544 21545 21546 21547 21548 21549 21550 21551 21552 21553 21554 21555 21556 21557 21558 21559 21560 21561 21562 21563 21564 21565 21566 21567 21568 21569 21570 21571 21572 21573 21574 21575 21576 21577 21578 21579 21580 21581 21582 21583 21584 21585 21586 21587 21588 21589 21590 21591 21592 21593 21594 21595 21596 21597 21598 21599 21600 21601 21602 21603 21604 21605 21606 21607 21608 21609 21610 21611 21612 21613 21614 21615 21616 21617 21618 21619 21620 21621 21622 21623 21624 21625 21626 21627 21628 21629 21630 21631 21632 21633 21634 21635 21636 21637 21638 21639 21640 21641 21642 21643 21644 21645 21646 21647 21648 21649 21650 21651 21652 21653 21654 21655 21656 21657 21658 21659 21660 21661 21662 21663 21664 21665 21666 21667 21668 21669 21670 21671 21672 21673 21674 21675 21676 21677 21678 21679 21680 21681 21682 21683 21684 21685 21686 21687 21688 21689 21690 21691 21692 21693 21694 21695 21696 21697 21698 21699 21700 21701 21702 21703 21704 21705 21706 21707 21708 21709 21710 21711 21712 21713 21714 21715 21716 21717 21718 21719 21720 21721 21722 21723 21724 21725 21726 21727 21728 21729 21730 21731 21732 21733 21734 21735 21736 21737 21738 21739 21740 21741 21742 21743 21744 21745 21746 21747 21748 21749 21750 21751 21752 21753 21754 21755 21756 21757 21758 21759 21760 21761 21762 21763 21764 21765 21766 21767 21768 21769 21770 21771 21772 21773 21774 21775 21776 21777 21778 21779 21780 21781 21782 21783 21784 21785 21786 21787 21788 21789 21790 21791 21792 21793 21794 21795 21796 21797 21798 21799 21800 21801 21802 21803 21804 21805 21806 21807 21808 21809 21810 21811 21812 21813 21814 21815 21816 21817 21818 21819 21820 21821 21822 21823 21824 21825 21826 21827 21828 21829 21830 21831 21832 21833 21834 21835 21836 21837 21838 21839 21840 21841 21842 21843 21844 21845 21846 21847 21848 21849 21850 21851 21852 21853 21854 21855 21856 21857 21858 21859 21860 21861 21862 21863 21864 21865 21866 21867 21868 21869 21870 21871 21872 21873 21874 21875 21876 21877 21878 21879 21880 21881 21882 21883 21884 21885 21886 21887 21888 21889 21890 21891 21892 21893 21894 21895 21896 21897 21898 21899 21900 21901 21902 21903 21904 21905 21906 21907 21908 21909 21910 21911 21912 21913 21914 21915 21916 21917 21918 21919 21920 21921 21922 21923 21924 21925 21926 21927 21928 21929 21930 21931 21932 21933 21934 21935 21936 21937 21938 21939 21940 21941 21942 21943 21944 21945 21946 21947 21948 21949 21950 21951 21952 21953 21954 21955 21956 21957 21958 21959 21960 21961 21962 21963 21964 21965 21966 21967 21968 21969 21970 21971 21972 21973 21974 21975 21976 21977 21978 21979 21980 21981 21982 21983 21984 21985 21986 21987 21988 21989 21990 21991 21992 21993 21994 21995 21996 21997 21998 21999 22000 22001 22002 22003 22004 22005 22006 22007 22008 22009 22010 22011 22012 22013 22014 22015 22016 22017 22018 22019 22020 22021 22022 22023 22024 22025 22026 22027 22028 22029 22030 22031 22032 22033 22034 22035 22036 22037 22038 22039 22040 22041 22042 22043 22044 22045 22046 22047 22048 22049 22050 22051 22052 22053 22054 22055 22056 22057 22058 22059 22060 22061 22062 22063 22064 22065 22066 22067 22068 22069 22070 22071 22072 22073 22074 22075 22076 22077 22078 22079 22080 22081 22082 22083 22084 22085 22086 22087 22088 22089 22090 22091 22092 22093 22094 22095 22096 22097 22098 22099 22100 22101 22102 22103 22104 22105 22106 22107 22108 22109 22110 22111 22112 22113 22114 22115 22116 22117 22118 22119 22120 22121 22122 22123 22124 22125 22126 22127 22128 22129 22130 22131 22132 22133 22134 22135 22136 22137 22138 22139 22140 22141 22142 22143 22144 22145 22146 22147 22148 22149 22150 22151 22152 22153 22154 22155 22156 22157 22158 22159 22160 22161 22162 22163 22164 22165 22166 22167 22168 22169 22170 22171 22172 22173 22174 22175 22176 22177 22178 22179 22180 22181 22182 22183 22184 22185 22186 22187 22188 22189 22190 22191 22192 22193 22194 22195 22196 22197 22198 22199 22200 22201 22202 22203 22204 22205 22206 22207 22208 22209 22210 22211 22212 22213 22214 22215 22216 22217 22218 22219 22220 22221 22222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22234 22235 22236 22237 22238 22239 22240 22241 22242 22243 22244 22245 22246 22247 22248 22249 22250 22251 22252 22253 22254 22255 22256 22257 22258 22259 22260 22261 22262 22263 22264 22265 22266 22267 22268 22269 22270 22271 22272 22273 22274 22275 22276 22277 22278 22279 22280 22281 22282 22283 22284 22285 22286 22287 22288 22289 22290 22291 22292 22293 22294 22295 22296 22297 22298 22299 22300 22301 22302 22303 22304 22305 22306 22307 22308 22309 22310 22311 22312 22313 22314 22315 22316 22317 22318 22319 22320 22321 22322 22323 22324 22325 22326 22327 22328 22329 22330 22331 22332 22333 22334 22335 22336 22337 22338 22339 22340 22341 22342 22343 22344 22345 22346 22347 22348 22349 22350 22351 22352 22353 22354 22355 22356 22357 22358 22359 22360 22361 22362 22363 22364 22365 22366 22367 22368 22369 22370 22371 22372 22373 22374 22375 22376 22377 22378 22379 22380 22381 22382 22383 22384 22385 22386 22387 22388 22389 22390 22391 22392 22393 22394 22395 22396 22397 22398 22399 22400 22401 22402 22403 22404 22405 22406 22407 22408 22409 22410 22411 22412 22413 22414 22415 22416 22417 22418 22419 22420 22421 22422 22423 22424 22425 22426 22427 22428 22429 22430 22431 22432 22433 22434 22435 22436 22437 22438 22439 22440 22441 22442 22443 22444 22445 22446 22447 22448 22449 22450 22451 22452 22453 22454 22455 22456 22457 22458 22459 22460 22461 22462 22463 22464 22465 22466 22467 22468 22469 22470 22471 22472 22473 22474 22475 22476 22477 22478 22479 22480 22481 22482 22483 22484 22485 22486 22487 22488 22489 22490 22491 22492 22493 22494 22495 22496 22497 22498 22499 22500 22501 22502 22503 22504 22505 22506 22507 22508 22509 22510 22511 22512 22513 22514 22515 22516 22517 22518 22519 22520 22521 22522 22523 22524 22525 22526 22527 22528 22529 22530 22531 22532 22533 22534 22535 22536 22537 22538 22539 22540 22541 22542 22543 22544 22545 22546 22547 22548 22549 22550 22551 22552 22553 22554 22555 22556 22557 22558 22559 22560 22561 22562 22563 22564 22565 22566 22567 22568 22569 22570 22571 22572 22573 22574 22575 22576 22577 22578 22579 22580 22581 22582 22583 22584 22585 22586 22587 22588 22589 22590 22591 22592 22593 22594 22595 22596 22597 22598 22599 22600 22601 22602 22603 22604 22605 22606 22607 22608 22609 22610 22611 22612 22613 22614 22615 22616 22617 22618 22619 22620 22621 22622 22623 22624 22625 22626 22627 22628 22629 22630 22631 22632 22633 22634 22635 22636 22637 22638 22639 22640 22641 22642 22643 22644 22645 22646 22647 22648 22649 22650 22651 22652 22653 22654 22655 22656 22657 22658 22659 22660 22661 22662 22663 22664 22665 22666 22667 22668 22669 22670 22671 22672 22673 22674 22675 22676 22677 22678 22679 22680 22681 22682 22683 22684 22685 22686 22687 22688 22689 22690 22691 22692 22693 22694 22695 22696 22697 22698 22699 22700 22701 22702 22703 22704 22705 22706 22707 22708 22709 22710 22711 22712 22713 22714 22715 22716 22717 22718 22719 22720 22721 22722 22723 22724 22725 22726 22727 22728 22729 22730 22731 22732 22733 22734 22735 22736 22737 22738 22739 22740 22741 22742 22743 22744 22745 22746 22747 22748 22749 22750 22751 22752 22753 22754 22755 22756 22757 22758 22759 22760 22761 22762 22763 22764 22765 22766 22767 22768 22769 22770 22771 22772 22773 22774 22775 22776 22777 22778 22779 22780 22781 22782 22783 22784 22785 22786 22787 22788 22789 22790 22791 22792 22793 22794 22795 22796 22797 22798 22799 22800 22801 22802 22803 22804 22805 22806 22807 22808 22809 22810 22811 22812 22813 22814 22815 22816 22817 22818 22819 22820 22821 22822 22823 22824 22825 22826 22827 22828 22829 22830 22831 22832 22833 22834 22835 22836 22837 22838 22839 22840 22841 22842 22843 22844 22845 22846 22847 22848 22849 22850 22851 22852 22853 22854 22855 22856 22857 22858 22859 22860 22861 22862 22863 22864 22865 22866 22867 22868 22869 22870 22871 22872 22873 22874 22875 22876 22877 22878 22879 22880 22881 22882 22883 22884 22885 22886 22887 22888 22889 22890 22891 22892 22893 22894 22895 22896 22897 22898 22899 22900 22901 22902 22903 22904 22905 22906 22907 22908 22909 22910 22911 22912 22913 22914 22915 22916 22917 22918 22919 22920 22921 22922 22923 22924 22925 22926 22927 22928 22929 22930 22931 22932 22933 22934 22935 22936 22937 22938 22939 22940 22941 22942 22943 22944 22945 22946 22947 22948 22949 22950 22951 22952 22953 22954 22955 22956 22957 22958 22959 22960 22961 22962 22963 22964 22965 22966 22967 22968 22969 22970 22971 22972 22973 22974 22975 22976 22977 22978 22979 22980 22981 22982 22983 22984 22985 22986 22987 22988 22989 22990 22991 22992 22993 22994 22995 22996 22997 22998 22999 23000 23001 23002 23003 23004 23005 23006 23007 23008 23009 23010 23011 23012 23013 23014 23015 23016 23017 23018 23019 23020 23021 23022 23023 23024 23025 23026 23027 23028 23029 23030 23031 23032 23033 23034 23035 23036 23037 23038 23039 23040 23041 23042 23043 23044 23045 23046 23047 23048 23049 23050 23051 23052 23053 23054 23055 23056 23057 23058 23059 23060 23061 23062 23063 23064 23065 23066 23067 23068 23069 23070 23071 23072 23073 23074 23075 23076 23077 23078 23079 23080 23081 23082 23083 23084 23085 23086 23087 23088 23089 23090 23091 23092 23093 23094 23095 23096 23097 23098 23099 23100 23101 23102 23103 23104 23105 23106 23107 23108 23109 23110 23111 23112 23113 23114 23115 23116 23117 23118 23119 23120 23121 23122 23123 23124 23125 23126 23127 23128 23129 23130 23131 23132 23133 23134 23135 23136 23137 23138 23139 23140 23141 23142 23143 23144 23145 23146 23147 23148 23149 23150 23151 23152 23153 23154 23155 23156 23157 23158 23159 23160 23161 23162 23163 23164 23165 23166 23167 23168 23169 23170 23171 23172 23173 23174 23175 23176 23177 23178 23179 23180 23181 23182 23183 23184 23185 23186 23187 23188 23189 23190 23191 23192 23193 23194 23195 23196 23197 23198 23199 23200 23201 23202 23203 23204 23205 23206 23207 23208 23209 23210 23211 23212 23213 23214 23215 23216 23217 23218 23219 23220 23221 23222 23223 23224 23225 23226 23227 23228 23229 23230 23231 23232 23233 23234 23235 23236 23237 23238 23239 23240 23241 23242 23243 23244 23245 23246 23247 23248 23249 23250 23251 23252 23253 23254 23255 23256 23257 23258 23259 23260 23261 23262 23263 23264 23265 23266 23267 23268 23269 23270 23271 23272 23273 23274 23275 23276 23277 23278 23279 23280 23281 23282 23283 23284 23285 23286 23287 23288 23289 23290 23291 23292 23293 23294 23295 23296 23297 23298 23299 23300 23301 23302 23303 23304 23305 23306 23307 23308 23309 23310 23311 23312 23313 23314 23315 23316 23317 23318 23319 23320 23321 23322 23323 23324 23325 23326 23327 23328 23329 23330 23331 23332 23333 23334 23335 23336 23337 23338 23339 23340 23341 23342 23343 23344 23345 23346 23347 23348 23349 23350 23351 23352 23353 23354 23355 23356 23357 23358 23359 23360 23361 23362 23363 23364 23365 23366 23367 23368 23369 23370 23371 23372 23373 23374 23375 23376 23377 23378 23379 23380 23381 23382 23383 23384 23385 23386 23387 23388 23389 23390 23391 23392 23393 23394 23395 23396 23397 23398 23399 23400 23401 23402 23403 23404 23405 23406 23407 23408 23409 23410 23411 23412 23413 23414 23415 23416 23417 23418 23419 23420 23421 23422 23423 23424 23425 23426 23427 23428 23429 23430 23431 23432 23433 23434 23435 23436 23437 23438 23439 23440 23441 23442 23443 23444 23445 23446 23447 23448 23449 23450 23451 23452 23453 23454 23455 23456 23457 23458 23459 23460 23461 23462 23463 23464 23465 23466 23467 23468 23469 23470 23471 23472 23473 23474 23475 23476 23477 23478 23479 23480 23481 23482 23483 23484 23485 23486 23487 23488 23489 23490 23491 23492 23493 23494 23495 23496 23497 23498 23499 23500 23501 23502 23503 23504 23505 23506 23507 23508 23509 23510 23511 23512 23513 23514 23515 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23531 23532 23533 23534 23535 23536 23537 23538 23539 23540 23541 23542 23543 23544 23545 23546 23547 23548 23549 23550 23551 23552 23553 23554 23555 23556 23557 23558 23559 23560 23561 23562 23563 23564 23565 23566 23567 23568 23569 23570 23571 23572 23573 23574 23575 23576 23577 23578 23579 23580 23581 23582 23583 23584 23585 23586 23587 23588 23589 23590 23591 23592 23593 23594 23595 23596 23597 23598 23599 23600 23601 23602 23603 23604 23605 23606 23607 23608 23609 23610 23611 23612 23613 23614 23615 23616 23617 23618 23619 23620 23621 23622 23623 23624 23625 23626 23627 23628 23629 23630 23631 23632 23633 23634 23635 23636 23637 23638 23639 23640 23641 23642 23643 23644 23645 23646 23647 23648 23649 23650 23651 23652 23653 23654 23655 23656 23657 23658 23659 23660 23661 23662 23663 23664 23665 23666 23667 23668 23669 23670 23671 23672 23673 23674 23675 23676 23677 23678 23679 23680 23681 23682 23683 23684 23685 23686 23687 23688 23689 23690 23691 23692 23693 23694 23695 23696 23697 23698 23699 23700 23701 23702 23703 23704 23705 23706 23707 23708 23709 23710 23711 23712 23713 23714 23715 23716 23717 23718 23719 23720 23721 23722 23723 23724 23725 23726 23727 23728 23729 23730 23731 23732 23733 23734 23735 23736 23737 23738 23739 23740 23741 23742 23743 23744 23745 23746 23747 23748 23749 23750 23751 23752 23753 23754 23755 23756 23757 23758 23759 23760 23761 23762 23763 23764 23765 23766 23767 23768 23769 23770 23771 23772 23773 23774 23775 23776 23777 23778 23779 23780 23781 23782 23783 23784 23785 23786 23787 23788 23789 23790 23791 23792 23793 23794 23795 23796 23797 23798 23799 23800 23801 23802 23803 23804 23805 23806 23807 23808 23809 23810 23811 23812 23813 23814 23815 23816 23817 23818 23819 23820 23821 23822 23823 23824 23825 23826 23827 23828 23829 23830 23831 23832 23833 23834 23835 23836 23837 23838 23839 23840 23841 23842 23843 23844 23845 23846 23847 23848 23849 23850 23851 23852 23853 23854 23855 23856 23857 23858 23859 23860 23861 23862 23863 23864 23865 23866 23867 23868 23869 23870 23871 23872 23873 23874 23875 23876 23877 23878 23879 23880 23881 23882 23883 23884 23885 23886 23887 23888 23889 23890 23891 23892 23893 23894 23895 23896 23897 23898 23899 23900 23901 23902 23903 23904 23905 23906 23907 23908 23909 23910 23911 23912 23913 23914 23915 23916 23917 23918 23919 23920 23921 23922 23923 23924 23925 23926 23927 23928 23929 23930 23931 23932 23933 23934 23935 23936 23937 23938 23939 23940 23941 23942 23943 23944 23945 23946 23947 23948 23949 23950 23951 23952 23953 23954 23955 23956 23957 23958 23959 23960 23961 23962 23963 23964 23965 23966 23967 23968 23969 23970 23971 23972 23973 23974 23975 23976 23977 23978 23979 23980 23981 23982 23983 23984 23985 23986 23987 23988 23989 23990 23991 23992 23993 23994 23995 23996 23997 23998 23999 24000 24001 24002 24003 24004 24005 24006 24007 24008 24009 24010 24011 24012 24013 24014 24015 24016 24017 24018 24019 24020 24021 24022 24023 24024 24025 24026 24027 24028 24029 24030 24031 24032 24033 24034 24035 24036 24037 24038 24039 24040 24041 24042 24043 24044 24045 24046 24047 24048 24049 24050 24051 24052 24053 24054 24055 24056 24057 24058 24059 24060 24061 24062 24063 24064 24065 24066 24067 24068 24069 24070 24071 24072 24073 24074 24075 24076 24077 24078 24079 24080 24081 24082 24083 24084 24085 24086 24087 24088 24089 24090 24091 24092 24093 24094 24095 24096 24097 24098 24099 24100 24101 24102 24103 24104 24105 24106 24107 24108 24109 24110 24111 24112 24113 24114 24115 24116 24117 24118 24119 24120 24121 24122 24123 24124 24125 24126 24127 24128 24129 24130 24131 24132 24133 24134 24135 24136 24137 24138 24139 24140 24141 24142 24143 24144 24145 24146 24147 24148 24149 24150 24151 24152 24153 24154 24155 24156 24157 24158 24159 24160 24161 24162 24163 24164 24165 24166 24167 24168 24169 24170 24171 24172 24173 24174 24175 24176 24177 24178 24179 24180 24181 24182 24183 24184 24185 24186 24187 24188 24189 24190 24191 24192 24193 24194 24195 24196 24197 24198 24199 24200 24201 24202 24203 24204 24205 24206 24207 24208 24209 24210 24211 24212 24213 24214 24215 24216 24217 24218 24219 24220 24221 24222 24223 24224 24225 24226 24227 24228 24229 24230 24231 24232 24233 24234 24235 24236 24237 24238 24239 24240 24241 24242 24243 24244 24245 24246 24247 24248 24249 24250 24251 24252 24253 24254 24255 24256 24257 24258 24259 24260 24261 24262 24263 24264 24265 24266 24267 24268 24269 24270 24271 24272 24273 24274 24275 24276 24277 24278 24279 24280 24281 24282 24283 24284 24285 24286 24287 24288 24289 24290 24291 24292 24293 24294 24295 24296 24297 24298 24299 24300 24301 24302 24303 24304 24305 24306 24307 24308 24309 24310 24311 24312 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 24326 24327 24328 24329 24330 24331 24332 24333 24334 24335 24336 24337 24338 24339 24340 24341 24342 24343 24344 24345 24346 24347 24348 24349 24350 24351 24352 24353 24354 24355 24356 24357 24358 24359 24360 24361 24362 24363 24364 24365 24366 24367 24368 24369 24370 24371 24372 24373 24374 24375 24376 24377 24378 24379 24380 24381 24382 24383 24384 24385 24386 24387 24388 24389 24390 24391 24392 24393 24394 24395 24396 24397 24398 24399 24400 24401 24402 24403 24404 24405 24406 24407 24408 24409 24410 24411 24412 24413 24414 24415 24416 24417 24418 24419 24420 24421 24422 24423 24424 24425 24426 24427 24428 24429 24430 24431 24432 24433 24434 24435 24436 24437 24438 24439 24440 24441 24442 24443 24444 24445 24446 24447 24448 24449 24450 24451 24452 24453 24454 24455 24456 24457 24458 24459 24460 24461 24462 24463 24464 24465 24466 24467 24468 24469 24470 24471 24472 24473 24474 24475 24476 24477 24478 24479 24480 24481 24482 24483 24484 24485 24486 24487 24488 24489 24490 24491 24492 24493 24494 24495 24496 24497 24498 24499 24500 24501 24502 24503 24504 24505 24506 24507 24508 24509 24510 24511 24512 24513 24514 24515 24516 24517 24518 24519 24520 24521 24522 24523 24524 24525 24526 24527 24528 24529 24530 24531 24532 24533 24534 24535 24536 24537 24538 24539 24540 24541 24542 24543 24544 24545 24546 24547 24548 24549 24550 24551 24552 24553 24554 24555 24556 24557 24558 24559 24560 24561 24562 24563 24564 24565 24566 24567 24568 24569 24570 24571 24572 24573 24574 24575 24576 24577 24578 24579 24580 24581 24582 24583 24584 24585 24586 24587 24588 24589 24590 24591 24592 24593 24594 24595 24596 24597 24598 24599 24600 24601 24602 24603 24604 24605 24606 24607 24608 24609 24610 24611 24612 24613 24614 24615 24616 24617 24618 24619 24620 24621 24622 24623 24624 24625 24626 24627 24628 24629 24630 24631 24632 24633 24634 24635 24636 24637 24638 24639 24640 24641 24642 24643 24644 24645 24646 24647 24648 24649 24650 24651 24652 24653 24654 24655 24656 24657 24658 24659 24660 24661 24662 24663 24664 24665 24666 24667 24668 24669 24670 24671 24672 24673 24674 24675 24676 24677 24678 24679 24680 24681 24682 24683 24684 24685 24686 24687 24688 24689 24690 24691 24692 24693 24694 24695 24696 24697 24698 24699 24700 24701 24702 24703 24704 24705 24706 24707 24708 24709 24710 24711 24712 24713 24714 24715 24716 24717 24718 24719 24720 24721 24722 24723 24724 24725 24726 24727 24728 24729 24730 24731 24732 24733 24734 24735 24736 24737 24738 24739 24740 24741 24742 24743 24744 24745 24746 24747 24748 24749 24750 24751 24752 24753 24754 24755 24756 24757 24758 24759 24760 24761 24762 24763 24764 24765 24766 24767 24768 24769 24770 24771 24772 24773 24774 24775 24776 24777 24778 24779 24780 24781 24782 24783 24784 24785 24786 24787 24788 24789 24790 24791 24792 24793 24794 24795 24796 24797 24798 24799 24800 24801 24802 24803 24804 24805 24806 24807 24808 24809 24810 24811 24812 24813 24814 24815 24816 24817 24818 24819 24820 24821 24822 24823 24824 24825 24826 24827 24828 24829 24830 24831 24832 24833 24834 24835 24836 24837 24838 24839 24840 24841 24842 24843 24844 24845 24846 24847 24848 24849 24850 24851 24852 24853 24854 24855 24856 24857 24858 24859 24860 24861 24862 24863 24864 24865 24866 24867 24868 24869 24870 24871 24872 24873 24874 24875 24876 24877 24878 24879 24880 24881 24882 24883 24884 24885 24886 24887 24888 24889 24890 24891 24892 24893 24894 24895 24896 24897 24898 24899 24900 24901 24902 24903 24904 24905 24906 24907 24908 24909 24910 24911 24912 24913 24914 24915 24916 24917 24918 24919 24920 24921 24922 24923 24924 24925 24926 24927 24928 24929 24930 24931 24932 24933 24934 24935 24936 24937 24938 24939 24940 24941 24942 24943 24944 24945 24946 24947 24948 24949 24950 24951 24952 24953 24954 24955 24956 24957 24958 24959 24960 24961 24962 24963 24964 24965 24966 24967 24968 24969 24970 24971 24972 24973 24974 24975 24976 24977 24978 24979 24980 24981 24982 24983 24984 24985 24986 24987 24988 24989 24990 24991 24992 24993 24994 24995 24996 24997 24998 24999 25000 25001 25002 25003 25004 25005 25006 25007 25008 25009 25010 25011 25012 25013 25014 25015 25016 25017 25018 25019 25020 25021 25022 25023 25024 25025 25026 25027 25028 25029 25030 25031 25032 25033 25034 25035 25036 25037 25038 25039 25040 25041 25042 25043 25044 25045 25046 25047 25048 25049 25050 25051 25052 25053 25054 25055 25056 25057 25058 25059 25060 25061 25062 25063 25064 25065 25066 25067 25068 25069 25070 25071 25072 25073 25074 25075 25076 25077 25078 25079 25080 25081 25082 25083 25084 25085 25086 25087 25088 25089 25090 25091 25092 25093 25094 25095 25096 25097 25098 25099 25100 25101 25102 25103 25104 25105 25106 25107 25108 25109 25110 25111 25112 25113 25114 25115 25116 25117 25118 25119 25120 25121 25122 25123 25124 25125 25126 25127 25128 25129 25130 25131 25132 25133 25134 25135 25136 25137 25138 25139 25140 25141 25142 25143 25144 25145 25146 25147 25148 25149 25150 25151 25152 25153 25154 25155 25156 25157 25158 25159 25160 25161 25162 25163 25164 25165 25166 25167 25168 25169 25170 25171 25172 25173 25174 25175 25176 25177 25178 25179 25180 25181 25182 25183 25184 25185 25186 25187 25188 25189 25190 25191 25192 25193 25194 25195 25196 25197 25198 25199 25200 25201 25202 25203 25204 25205 25206 25207 25208 25209 25210 25211 25212 25213 25214 25215 25216 25217 25218 25219 25220 25221 25222 25223 25224 25225 25226 25227 25228 25229 25230 25231 25232 25233 25234 25235 25236 25237 25238 25239 25240 25241 25242 25243 25244 25245 25246 25247 25248 25249 25250 25251 25252 25253 25254 25255 25256 25257 25258 25259 25260 25261 25262 25263 25264 25265 25266 25267 25268 25269 
# Korean translation of drakbootdisk.
# Copyright (C) 2001 Free Software Foundation, Inc.
# Jaegeum Choe <baedaron@hananet.net>, 2001.
#
# changes asked by HP people -- pablo 2003-01-23
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-10-09 01:35+0800\n"
"PO-Revision-Date: 2002-09-09 09:08+0900\n"
"Last-Translator: Jaegeum Cze <baedaron@hanafos.com>\n"
"Language-Team: Korean <beadaron@hanafos.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "어떤 종류의 항목을 추가하시겠습니까?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""

#: ../move/move.pm:448 ../move/move.pm:460
#, fuzzy, c-format
msgid "Key is not writable"
msgstr "XawTV가 설치되지 않았습니다!"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "재시도"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
#, c-format
msgid "Reboot"
msgstr "다시 시작"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "희망하는 보안 단계를 선택해 주세요."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "경고 설정"

#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "희망하는 보안 단계를 선택해 주세요."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1777
#: install_any.pm:1829 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:857 network/netconnect.pm:957
#: network/netconnect.pm:961 network/netconnect.pm:965
#: network/netconnect.pm:970 network/netconnect.pm:1115
#: network/netconnect.pm:1119 network/netconnect.pm:1238
#: network/netconnect.pm:1243 network/netconnect.pm:1263
#: network/netconnect.pm:1422 network/thirdparty.pm:319
#: network/thirdparty.pm:326 network/thirdparty.pm:370
#: network/thirdparty.pm:372 network/thirdparty.pm:393
#: network/thirdparty.pm:417 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:686
#: printer/printerdrake.pm:690 printer/printerdrake.pm:772
#: printer/printerdrake.pm:1555 printer/printerdrake.pm:1603
#: printer/printerdrake.pm:1640 printer/printerdrake.pm:1685
#: printer/printerdrake.pm:1689 printer/printerdrake.pm:1703
#: printer/printerdrake.pm:1795 printer/printerdrake.pm:1876
#: printer/printerdrake.pm:1880 printer/printerdrake.pm:1884
#: printer/printerdrake.pm:1933 printer/printerdrake.pm:1991
#: printer/printerdrake.pm:1995 printer/printerdrake.pm:2009
#: printer/printerdrake.pm:2129 printer/printerdrake.pm:2133
#: printer/printerdrake.pm:2176 printer/printerdrake.pm:2249
#: printer/printerdrake.pm:2267 printer/printerdrake.pm:2276
#: printer/printerdrake.pm:2285 printer/printerdrake.pm:2296
#: printer/printerdrake.pm:2360 printer/printerdrake.pm:2511
#: printer/printerdrake.pm:2924 printer/printerdrake.pm:3208
#: printer/printerdrake.pm:3214 printer/printerdrake.pm:3779
#: printer/printerdrake.pm:3783 printer/printerdrake.pm:3787
#: printer/printerdrake.pm:4183 printer/printerdrake.pm:4424
#: printer/printerdrake.pm:4452 printer/printerdrake.pm:4529
#: printer/printerdrake.pm:4595 printer/printerdrake.pm:4715
#: standalone/drakTermServ:394 standalone/drakTermServ:464
#: standalone/drakTermServ:473 standalone/drakTermServ:774
#: standalone/drakTermServ:781 standalone/drakTermServ:802
#: standalone/drakTermServ:849 standalone/drakTermServ:1095
#: standalone/drakTermServ:1572 standalone/drakTermServ:1581
#: standalone/drakTermServ:1589 standalone/drakTermServ:1594
#: standalone/drakTermServ:1602 standalone/drakTermServ:1618
#: standalone/drakTermServ:1638 standalone/drakauth:36
#: standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "오류"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"오류가 발생했습니다. 그러나 적절히 처리할 수 없습니다.\n"
"위헝을 감수할려면 계속하세요."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "오류 발생"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "루프백 파일을 제거합니까?"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "X 프로그램 액세스"

#: ../move/tree/mdk_totem:72
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "라디오 지원:"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "주의깊게 읽으세요!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "16 MB 이상"

#: Xconfig/card.pm:161
#, c-format
msgid "X server"
msgstr "X 서버"

#: Xconfig/card.pm:162
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "X 서버 선택"

#: Xconfig/card.pm:194
#, c-format
msgid "Multi-head configuration"
msgstr "다중 헤드 설정"

#: Xconfig/card.pm:195
#, fuzzy, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"님의 시스템은 다중 헤드 설정을 지원합니다.\n"
"어떻게 하시겠습니까?"

#: Xconfig/card.pm:264
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "%s 팩키지 설치중"

#: Xconfig/card.pm:274
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "그래픽 카드의 메모리 용량을 선택하세요"

#: Xconfig/card.pm:365
#, c-format
msgid "Xorg configuration"
msgstr "Xorg 설정"

#: Xconfig/card.pm:367
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "어느 Xorg 설정을 선택하시겠습니까?"

#: Xconfig/card.pm:400
#, c-format
msgid "Configure all heads independently"
msgstr "모든 헤드를 독립적으로 설정"

#: Xconfig/card.pm:401
#, c-format
msgid "Use Xinerama extension"
msgstr "Xinerama 확장 사용"

#: Xconfig/card.pm:406
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "「%s」%s 카드만 설정"

#: Xconfig/card.pm:418 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:425 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s를 사용한 3D 하드웨어 가속"

#: Xconfig/card.pm:427
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "님의 카드는 Xorg %s로 3D 하드웨어 가속기능을 지원합니다."

#: Xconfig/card.pm:433
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s를 사용한 실험적 3D 하드웨어 가속"

#: Xconfig/card.pm:435
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"님의 카드는 Xorg %s로만 가능한 3D 하드웨어 가속기능이 지원됩니다.\n"
"주의: 이것은 실험적인 지원이며 님의 컴퓨터를 멈추게 할 수 있습니다."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
#, c-format
msgid "Custom"
msgstr "사용자 정의"

#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4524 printer/printerdrake.pm:4988
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "종료"

#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "그래픽 카드"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "모니터"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "해상도"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "테스트"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:494
#: standalone/drakfont:556
#, c-format
msgid "Options"
msgstr "옵션들"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"변경사항을 저장할까요?\n"
"현재 설정:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "모니터를 선택하세요"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "모니터를 선택하세요"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "플러그앤플레이"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "일반 마우스"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "상표"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"수직 그리고 더욱 중요한 수평 주파수라는 두 개의 중요한 인자가 있습니다. 수직 "
"주파수는 \n"
"전체화면이 갱신되는 주기이며, 수평 주파수는 스캔라인들이 갱신되는 주기입니"
"다.\n"
"\n"
"매우 중요: 님의 실제 모니터의 능력치를 넘어서는 모델을 선택하지 마세요: \n"
"님의 모니터가 훼손될 수 있습니다.\n"
"잘 모르겠다면, 안전하게 낮은 설정값을 선택하세요"

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "수평 주파수"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "수직 주파수"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 색상 (8 bits)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "3만2천 색상 (15 bits)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "6만5천 색상 (16 bits)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "천6백만 색상  (24bits)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "해상도"

#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "기타"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "해상도와 색상을 선택하세요"

#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "그래픽 카드: %s"

#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "확인"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "취소"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "도움말"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "설정 테스트"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "이 설정을 테스트해 보시겠습니까?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d 초"

#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "이것이 맞습니까?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "키보드 형태: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "마우스 종류: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "마우스 장치: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "모니터: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "모니터 수평주파수: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "모니터 수직주파수: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "그래픽 카드: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "비디오 메모리: %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "색상 심도: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "해상도: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg 드라이버: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "시작시 바로 X 실행"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"부팅시에 자동으로 X윈도우가 시작되도록 할수 있습니다.\n"
"다시 부팅했을때 자동으로 X윈도가 시작되길 원하세요?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "TV 카드가 어떤 놈을 사용합니까?"

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356
#: standalone/service_harddrake:206
#, c-format
msgid "Please wait"
msgstr "기다려 주세요"

#: any.pm:142
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "부트로더 설치"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "부트로더 설치가 실패했습니다. 다음과 같은 오류가 발생했습니다:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"부트로더가 제대로 작동하기 위해서는 공개 펌웨어 부트 장치를 변경할 필요성이\n"
"있을 수도 있습니다. 만약 재부팅후에 부트로더 프롬프트가 나타나지 않는다면,\n"
"재부팅시에 명령-옵션-O-F를 계속 누르고 있다가 다음과 같이 입력하세요:\n"
"setenv boot-device %s,\\\\:tbxi\n"
"shut-down\n"
"그러고나면 다음부터는 부트로더 프롬프트를 볼 수 있을 것입니다."

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "드라이브의 첫번째 섹터(MBR)"

#: any.pm:232
#, fuzzy, c-format
msgid "First sector of the root partition"
msgstr "부트 파티션의 첫번째 섹터"

#: any.pm:234
#, fuzzy, c-format
msgid "On Floppy"
msgstr "부트 플로피"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "건너뛰기"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/GRUB 설치"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "부트로더를 어디에 설치하고 싶으세요?"

#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "부팅 스타일 설정"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "부트로더 주 옵션들"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "메모리 용량를 MB로 입력하세요"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "옵션: 「명령행 옵션제한」은 암호없이 사용될수 없습니다."

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "암호가 일치하지 않습니다."

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "다시 시도하세요."

#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "사용할 부트로더"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "부트 장치"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "기본 이미지로 부팅될 때까지 지연시간"

#: any.pm:288
#, fuzzy, c-format
msgid "Enable ACPI"
msgstr "CD 부팅 허용?"

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr ""

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr ""

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "암호"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "암호 (확인)"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "명령행 옵션을 제한합니다."

#: any.pm:296
#, c-format
msgid "restrict"
msgstr "제한"

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "부팅시 /tmp 디렉토리 자동 청소"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "옵션: 정확한 메모리 용량 (%d MB 발견)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "초기화 메시지"

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "펌웨어 열기 지연"

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "커널 부트 제한시간"

#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "CD 부팅 허용?"

#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "OF 부팅 허용?"

#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "기본 OS?"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "이미지"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "루트"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "추가"

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "비디오 모드"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "초기화 램디스크"

#: any.pm:376
#, fuzzy, c-format
msgid "Network profile"
msgstr "네트웍 인터페이스"

#: any.pm:385 any.pm:390 any.pm:392
#, c-format
msgid "Label"
msgstr "항목명"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "기본값"

#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "램디스크 용량"

#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "비디오 없음"

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "빈 항목명은 허용되지 않습니다."

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "커널 이미지를 지정해 주세요."

#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "루트 파티션은 반드시 지정되어야 합니다."

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "이 항목명은 이미 사용되고 있습니다."

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "어떤 종류의 항목을 추가하시겠습니까?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "리눅스"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "기타 OS (SunOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "기타 OS (MacOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "기타 OS (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"몇 가지 항목이 여기에 표시되고 있습니다.\n"
"더 추가하거나, 기존의 것들을 수정할수 있습니다."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "X 프로그램 액세스"

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "RPM 도구 액세스"

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "「su」허용"

#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "시스템 관리파일 액세스"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "네트웍 도구 액세스"

#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "컴파일 도구 액세스"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(이미 %s는(은) 추가되었습니다.)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "이 암호는 너무 단순합니다."

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "사용자명을 입력해 주세요"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "사용자명은 영문 소문자나 숫자, '-' 그리고 '_' 만 포함될수 있습니다."

#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "사용자 명이 너무 깁니다."

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "이 사용자명은 이미 추가되어 있습니다."

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "사용자 ID"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "그룹 ID"

#: any.pm:625
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "%s 옵션은 숫자이어야 합니다!"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""

#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "사용자 추가"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"사용자 입력\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4988
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "완료"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "사용자 허가"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "실제 이름"

#: any.pm:649 standalone/drakbackup:1634
#, fuzzy, c-format
msgid "Login name"
msgstr "도메인 이름"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "명령 해석기"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "아이콘"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "자동로그인"

#: any.pm:704
#, fuzzy, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"자동으로 특정 사용자로서 로그인되도록 할 수 있습니다.\n"
"이런 특성을 원하세요?"

#: any.pm:705
#, fuzzy, c-format
msgid "Use this feature"
msgstr "aboot를 사용하시겠습니까?"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "기본 사용자를 선택하세요:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "사용할 윈도우 매니저를 선택하세요:"

#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "사용할 언어를 선택해 주세요."

#: any.pm:720 any.pm:788
#, fuzzy, c-format
msgid "Language choice"
msgstr "미얀마"

#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "설치후 다른 다른 언어를 선택할수 있습니다."

#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr ""

#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr ""

#: any.pm:768 help.pm:647
#, fuzzy, c-format
msgid "All languages"
msgstr "언어 선택"

#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
#, c-format
msgid "Country / Region"
msgstr "국가"

#: any.pm:842
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "어떤 종류의 마우스를 사용하십니까?"

#: any.pm:844
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "지원되는 키보드 목록이 여기에 있습니다."

#: any.pm:845
#, fuzzy, c-format
msgid "Other Countries"
msgstr "기타 포트"

#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "고급"

#: any.pm:853
#, c-format
msgid "Input method:"
msgstr ""

#: any.pm:856 install_any.pm:423 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1229 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "없음"

#: any.pm:973
#, c-format
msgid "No sharing"
msgstr "비공유"

#: any.pm:973
#, c-format
msgid "Allow all users"
msgstr "모든 사용자 허용"

#: any.pm:977
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: any.pm:989
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""

#: any.pm:992
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""

#: any.pm:1000
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "NFS와 삼바 중, 어느 것을 이용하시겠습니까?"

#: any.pm:1025
#, c-format
msgid "Launch userdrake"
msgstr "사용자드레이크 실행"

#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5306 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "닫기"

#: any.pm:1027
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "로컬 파일"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:26
#, fuzzy, c-format
msgid "Smart Card"
msgstr "이더넷 카드"

#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "윈도우즈 도메인"

#: authentication.pm:28
#, fuzzy, c-format
msgid "Active Directory with SFU"
msgstr "모든 백업 복구"

#: authentication.pm:29
#, fuzzy, c-format
msgid "Active Directory with Winbind"
msgstr "모든 백업 복구"

#: authentication.pm:66
#, c-format
msgid "Local file:"
msgstr "로컬 파일 :"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""

#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "윈도우즈 도메인:"

#: authentication.pm:69
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""

#: authentication.pm:70
#, fuzzy, c-format
msgid "Active Directory with SFU:"
msgstr "모든 백업 복구"

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr ""

#: authentication.pm:71
#, fuzzy, c-format
msgid "Active Directory with Winbind:"
msgstr "모든 백업 복구"

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""

#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "인증 LDAP"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP 기반 DN"

#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP 서버"

#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "단순화"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""

#: authentication.pm:121 authentication.pm:159
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "사용자 인증"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "도메인"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "서버"

#: authentication.pm:125
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "데이터베이스"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:128
#, fuzzy, c-format
msgid "Password for user"
msgstr "암호가 필요합니다."

#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "인증 NIS"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "NIS 도메인"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "NIS 서버"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr "인증 윈도우즈 도메인"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr ""

#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr "도메인 관리자 사용자명"

#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr ""

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""

#: authentication.pm:182
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "root 암호 설정"

#: authentication.pm:183 standalone/drakvpn:1111
#, fuzzy, c-format
msgid "Authentication method"
msgstr "사용자 인증"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "암호 없음"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "이 암호는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)"

#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "사용자 인증"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "NIS 도메인 없이는 브로드케스트를 사용할 수 없습니다."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""

#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr "그래픽 메뉴 LILO"

#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr "텍스트 메뉴 LILO"

#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr ""

#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr ""

#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "/boot에 공간이 부족합니다."

#: bootloader.pm:1480
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "「%s」파티션에 부트로더를 설치할 수 없습니다.\n"

#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1534
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "부트로더 설치"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d 분"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 분"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d 초"

#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "kdesu가 없음"

#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr ""

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "오스트리아"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "오스트레일리아"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "벨기에"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "브라질"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "캐나다"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "스위스"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "코스타리카"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "체코 공화국"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "독일"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "덴마크"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "에스토니아"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "스페인"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "핀란드"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "프랑스"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "그리스"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "헝가리"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "아일랜드"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "이스라엘"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "이탈리아"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "일본"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "네덜란드"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "노르웨이"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "뉴질랜드"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "폴란드"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "포르투갈"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "러시아"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "스웨덴"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "슬로바키아"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "태국"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "대만"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "남아프리카"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "미국"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "새로 만들기"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "언마운트"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "마운트"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "마운트 위치"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "WebDAV 서버 URL을 입력하세요."

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "서버:"

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "마운트 위치: "

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, c-format
msgid "Options: %s"
msgstr "옵션들: %s"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "먼저 데이터를 백업하세요."

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"만약 aboot를 사용할 계획이라면, 디스크의 시작부분에 충분한 공간 (2048 섹터 "
"면 충분함)\n"
"을 남기도록 주의하세요."

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "마법사"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "행동을 선택하세요"

#: diskdrake/hd_gtk.pm:189
#, fuzzy, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"하나의 큰 도스 파티션을 가지고 있습니다.\n"
"(일반적으로 마이크로소프트의 도스/윈도우즈에서 사용).\n"
"먼저 그 파티션의 크기를 조정할 것을 권장합니다.\n"
"(그것을 클릭한후, \"크기조정\"을 클릭하세요.)"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "파티션을 클릭하세요"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr "상세설명"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "하드 디스크를 찾을 수 없습니다."

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "저널화 FS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "스왑"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "창"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "빈공간"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "파일시스템 유형:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "대신에 「%s」를 사용합니다"

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "생성"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "유형"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "삭제"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "「언마운트」를 먼저 사용하세요"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "추가 파티션 선택"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "파티션 선택"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "종료"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "되돌리기"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "일반 모드로 전환"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "전문가 모드로 전환"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "계속하시겠습니까?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "저장하지 않고 종료하시겠습니까?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "파티션을 기록하지 않고 종료하시겠습니까?"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "「/etc/fstab」의 변경사항을 저장하시겠습니까?"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "파티션 테이블 변경사항을 적용하려면 리부팅을 해야 합니다."

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "모두 삭제"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "자동 할당"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "추가 옵션"

#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "하드 디스크 정보"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "모든 주파티션이 사용중입니다."

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "더이상 파티션을 추가할 수 없습니다."

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"더 많은 파티션을 만드실려면, 확장 파티션을 만들수 있도록 주파티션 하나를 지우"
"세요."

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""

#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "파티션 테이블 저장"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "파티션 테이블 복구"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "파티션 테이블 응급처치"

#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "파티션 테이블 다시 읽기"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "탈착식 미디어 자동 마운트"

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "파일을 선택하세요."

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"백업 파티션 테이블 크기가 같지 않습니다.\n"
"계속 하시겠습니까?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "파티션 테이블 복구 시도 중..."

#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "자세한 정보"

#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "크기조정"

#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "포맷"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "RAID에 추가"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "LVM에 추가"

#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "RAID로부터 제거"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "LVM으로부터 제거"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "RAID 수정"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "루프백으로 사용"

#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "새 파티션 만들기"

#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "시작 섹터: "

#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "크기(MB) :"

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "파일시스템 유형: "

#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "사용자 정의"

#: diskdrake/interactive.pm:528
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "지역 파일들"

#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "루프백 파일을 제거합니까?"

#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "%s의 파티션 유형을 변경후 이 파티션내의 모든 자료를 잃게 됩니다."

#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "파티션 유형 변경"

#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "어떤 파일 시스템을 원하세요?"

#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "EXT2에서 EXT3로 변경"

#: diskdrake/interactive.pm:657
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "%s파일을 어디에 루프백으로 마운트 하시겠습니까?"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "장치 %s를 어디에 마운트 하시겠습니까?"

#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"이 파티션은 loopback으로 설정되어 있으므로 마운트 포인트를 변경할수 없습니"
"다.\n"
"loopback을 먼저 제거하세요."

#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "%s를 어디에 마운트 하시겠습니까?"

#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "크기변경"

#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "도스 파일시스템의 범위 계산중"

#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "이 파티션은 크기변경이 허용되지 않습니다."

#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "이 파티션의 모든 데이타를 백업하여야 합니다."

#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "%s 파티션의 크기를 변경하면, 모든 데이타를 잃게됩니다."

#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "새로운 크기를 선택해 주세요"

#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "새로운 용량(MB):"

#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:843
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "추가할 기존 RAID를 선택하세요."

#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
#, c-format
msgid "new"
msgstr "새로 만들기"

#: diskdrake/interactive.pm:860
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "추가할 LVM를 선택하세요"

#: diskdrake/interactive.pm:866
#, c-format
msgid "LVM name?"
msgstr "LVM 이름?"

#: diskdrake/interactive.pm:894
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""

#: diskdrake/interactive.pm:896
#, c-format
msgid "Moving physical extents"
msgstr ""

#: diskdrake/interactive.pm:914
#, c-format
msgid "This partition can not be used for loopback"
msgstr "이 파티션은 loopback으로 사용될 수 없습니다."

#: diskdrake/interactive.pm:927
#, c-format
msgid "Loopback"
msgstr "루프백"

#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback file name: "
msgstr "루프백 파일 이름: "

#: diskdrake/interactive.pm:933
#, c-format
msgid "Give a file name"
msgstr "파일 이름을 입력하세요."

#: diskdrake/interactive.pm:936
#, fuzzy, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "다른 루프백이 이 파일을 사용하고 있습니다, 다른 것을 선택해 주세요."

#: diskdrake/interactive.pm:937
#, c-format
msgid "File already exists. Use it?"
msgstr "파일이 이미 존재합니다. 그것을 사용합니까?"

#: diskdrake/interactive.pm:960
#, c-format
msgid "Mount options"
msgstr "마운트 옵션들:"

#: diskdrake/interactive.pm:967
#, c-format
msgid "Various"
msgstr "다양한"

#: diskdrake/interactive.pm:1034
#, c-format
msgid "device"
msgstr "장치"

#: diskdrake/interactive.pm:1035
#, c-format
msgid "level"
msgstr "레벨"

#: diskdrake/interactive.pm:1036
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "크기"

#: diskdrake/interactive.pm:1053
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "주의 : 이 조작은 위험합니다."

#: diskdrake/interactive.pm:1068
#, c-format
msgid "What type of partitioning?"
msgstr "어떤 유형의 파티션입니까?"

#: diskdrake/interactive.pm:1106
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "변경된것을 적용하기 위해선 리부팅이 필요합니다."

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "%s 드라이브의 파티션 테이블을 저장합니다."

#: diskdrake/interactive.pm:1138
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "%s 파티션을 포맷하면, 모든 데이타를 잃게 됩니다."

#: diskdrake/interactive.pm:1154
#, c-format
msgid "Move files to the new partition"
msgstr "새 파티션으로 파일 옴기기"

#: diskdrake/interactive.pm:1154 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr "파일 숨기기"

#: diskdrake/interactive.pm:1155
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"디렉토리 %s에는 이미 데이터가 있습니다.\n"
"(%s)"

#: diskdrake/interactive.pm:1166
#, c-format
msgid "Moving files to the new partition"
msgstr "새 파티션으로 파일 옴기는 중"

#: diskdrake/interactive.pm:1170
#, c-format
msgid "Copying %s"
msgstr "%s 복사 중"

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Removing %s"
msgstr "%s 제거 중"

#: diskdrake/interactive.pm:1188
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: diskdrake/interactive.pm:1189
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""

#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
#, c-format
msgid "Device: "
msgstr "장치: "

#: diskdrake/interactive.pm:1210
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "호스트명:"

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Volume label: "
msgstr ""

#: diskdrake/interactive.pm:1212
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS 드라이브 문자: %s (단지 추측일 뿐임)\n"

#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
#: diskdrake/interactive.pm:1289
#, c-format
msgid "Type: "
msgstr "유형: "

#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "이름:"

#: diskdrake/interactive.pm:1227
#, c-format
msgid "Start: sector %s\n"
msgstr "시작: 섹터 %s\n"

#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s"
msgstr "크기: %s"

#: diskdrake/interactive.pm:1230
#, c-format
msgid ", %s sectors"
msgstr ", %s 섹터"

#: diskdrake/interactive.pm:1232
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "실린더 %d에서 %d까지\n"

#: diskdrake/interactive.pm:1233
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""

#: diskdrake/interactive.pm:1234
#, c-format
msgid "Formatted\n"
msgstr "포맷되었음\n"

#: diskdrake/interactive.pm:1235
#, c-format
msgid "Not formatted\n"
msgstr "포맷 안되었음\n"

#: diskdrake/interactive.pm:1236
#, c-format
msgid "Mounted\n"
msgstr "마운트 되었음\n"

#: diskdrake/interactive.pm:1237
#, c-format
msgid "RAID %s\n"
msgstr "레이드 장치 %s\n"

#: diskdrake/interactive.pm:1242
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"루프백 파일(들):\n"
"   %s\n"

#: diskdrake/interactive.pm:1243
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"기본적으로 부팅되는 파티션\n"
"    (lilo를 위한것이 아니라 MS-DOS boot를 위한것임)\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Level %s\n"
msgstr "%s 등급\n"

#: diskdrake/interactive.pm:1246
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "크기 %s\n"

#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID-disks %s\n"
msgstr "레이드-디스크 %s\n"

#: diskdrake/interactive.pm:1249
#, c-format
msgid "Loopback file name: %s"
msgstr "루프백 파일 이름: %s"

#: diskdrake/interactive.pm:1252
#, fuzzy, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"이 파티션은 드라이버 파티션입니다.\n"
"그냥 두는 것이 좋습니다.\n"

#: diskdrake/interactive.pm:1255
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"이 특별한 부트스트랩\n"
"파티션은 시스템을 \n"
"듀얼 부팅하기 위한 것입니다.\n"

#: diskdrake/interactive.pm:1272
#, c-format
msgid "Read-only"
msgstr "읽기 전용"

#: diskdrake/interactive.pm:1273
#, c-format
msgid "Size: %s\n"
msgstr "크기: %s\n"

#: diskdrake/interactive.pm:1274
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "위치: %s 실린터, %s 헤드, %s 섹터\n"

#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
#, c-format
msgid "Info: "
msgstr "정보: "

#: diskdrake/interactive.pm:1276
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-디스크 %s\n"

#: diskdrake/interactive.pm:1277
#, c-format
msgid "Partition table type: %s\n"
msgstr "파티션 테이블 유형: %s\n"

#: diskdrake/interactive.pm:1278
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "%d 버스상에서 ID %d\n"

#: diskdrake/interactive.pm:1321
#, c-format
msgid "Filesystem encryption key"
msgstr "파일시스템 암호화 키"

#: diskdrake/interactive.pm:1322
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "파일 시스템 암호화 키 선택"

#: diskdrake/interactive.pm:1325
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "이 암호화 키는 너무 단순합니다.( 적어도 %d 글자는 넘어야 합니다)"

#: diskdrake/interactive.pm:1326
#, c-format
msgid "The encryption keys do not match"
msgstr "암호화 키가 일치하지 않습니다."

#: diskdrake/interactive.pm:1329 network/netconnect.pm:1065
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "암호화 키"

#: diskdrake/interactive.pm:1330
#, c-format
msgid "Encryption key (again)"
msgstr "암호화 키 (확인)"

#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "사용자 인증"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "유형 변경"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "도메인 인증이 필요합니다."

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "사용할 아이디"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "또 다른 것"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "사용자명"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "서버 검색"

#: diskdrake/smbnfs_gtk.pm:210
#, fuzzy, c-format
msgid "Search new servers"
msgstr "서버 검색"

#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "%s 팩키지 설치중"

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "필수 팩키지 %s가 없습니다."

#: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1317
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4308
#: printer/printerdrake.pm:5465 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:490 standalone/localedrake:43
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "경고"

#: do_pkgs.pm:35 standalone/harddrake2:490
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "다음 팩키지들이 설치될 것입니다."

#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "팩키지 설치 중..."

#: do_pkgs.pm:252
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "%s 제거 중"

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "%s 파티션 포맷중"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "%s 파일를 생성하고 포맷"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "%s는 %s 유형이므로 포맷할수 없습니다."

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s 포맷 실패(드라이브 %s)"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "순환 마운트 %s\n"

#: fs/mount.pm:74
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "%s 파티션 포맷중"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: fs/mount.pm:80 fs/mount.pm:97
#, fuzzy, c-format
msgid "Checking %s"
msgstr "%s 복사 중"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s를 언마운트중 오류발생: %s"

#: fs/mount.pm:142
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "%s 파티션 포맷중"

#: fs/mount_options.pm:111
#, fuzzy, c-format
msgid "Use an encrypted file system"
msgstr " %s 마운트 위치에는 암호화 파일시스템을 사용할 수 없습니다. "

#: fs/mount_options.pm:113
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:115
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:118
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:121
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:123
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:127
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:131
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs/mount_options.pm:133
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs/mount_options.pm:137
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs/mount_options.pm:143
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr ""

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""

#: fs/type.pm:376
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "16MB 미만의 파티션에는 JFS 파일 시스템을 사용할 수 없습니다."

#: fs/type.pm:377
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "32MB 미만의 파티션에는 ReiserFS 파일 시스템을 사용할 수 없습니다."

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr ""

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "서버"

#: fsedit.pm:217
#, fuzzy, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"하드 디스크의 파티션 테이블을 읽을수 없습니다. 너무 손상되어 있습니다:(\n"
"문제있는 파티션을 비우기위한 시도를 할 수 있습니다.(모든 데이터가 손실됩니"
"다!)\n"
"다른 해결책은 DrakX가 파티션 테이블을 변경하지 못하게 하는 것입니다.\n"
"(오류는 %s 입니다.)\n"
"\n"
"파티션들을 잃어도 좋습니까?\n"

#: fsedit.pm:385
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "마운트 위치는 반드시 「/」로 시작하여야 합니다."

#: fsedit.pm:386
#, fuzzy, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "프린터 이름에는 문자, 숫자 그리고 밑줄(Underscore)만 있어야 합니다."

#: fsedit.pm:387
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "마운트 위치 %s가 이미 존재합니다.\n"

#: fsedit.pm:389
#, fuzzy, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"소프트웨어 RAID 파티션을 루트(/)로 지정했습니다.\n"
"어떠한 부트로더도 /boot 파티션 없이는 이것을 처리하지 못합니다.\n"
"그러므로 /boot 파티션을 추가하는 것을 잊지 마세요."

#: fsedit.pm:394
#, fuzzy, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr " %s 마운트 포인트로 LVM 논리볼륨을 사용할 수는 없습니다. "

#: fsedit.pm:396
#, fuzzy, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
"소프트웨어 RAID 파티션을 루트(/)로 지정했습니다.\n"
"어떠한 부트로더도 /boot 파티션 없이는 이것을 처리하지 못합니다.\n"
"그러므로 /boot 파티션을 추가하는 것을 잊지 마세요."

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "이 디렉토리는 루트 파일시스템 안에 있어야 합니다."

#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"이 마운트 위치에는 트루 파일시스템 (ext2, reiserfs, xfs, jfs)이 필요합니다.\n"

#: fsedit.pm:408
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr " %s 마운트 위치에는 암호화 파일시스템을 사용할 수 없습니다. "

#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "자동할당하기에는 공간이 합니다."

#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "할 일 없음."

#: harddrake/data.pm:62 install_any.pm:1712
#, c-format
msgid "Floppy"
msgstr "플로피"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "짚"

#: harddrake/data.pm:88 install_any.pm:1713
#, c-format
msgid "Hard Disk"
msgstr "하드디스크"

#: harddrake/data.pm:97 install_any.pm:1714
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr ""

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:127 standalone/drakbackup:2055
#, c-format
msgid "Tape"
msgstr "테입"

#: harddrake/data.pm:136
#, fuzzy, c-format
msgid "Videocard"
msgstr "비디오 모드"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""

#: harddrake/data.pm:154
#, fuzzy, c-format
msgid "Tvcard"
msgstr "TV 카드"

#: harddrake/data.pm:163
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "다른 매체"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "사운드카드"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr ""

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr ""

#: harddrake/data.pm:209
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "내장 ISDN 카드"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""

#: harddrake/data.pm:265
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "이더넷 카드"

#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr "모뎀"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "메모리"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr ""

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:993
#, c-format
msgid "Printer"
msgstr "프린터"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr ""

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr ""

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr ""

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr ""

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr ""

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "SCSI 컨트롤러"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr ""

#: harddrake/data.pm:420
#, fuzzy, c-format
msgid "USB ports"
msgstr "프린터 없음"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr ""

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "키보드"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr ""

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
#, c-format
msgid "Mouse"
msgstr "마우스"

#: harddrake/data.pm:485
#, fuzzy, c-format
msgid "UPS"
msgstr "CUPS"

#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "스캐너"

#: harddrake/data.pm:504 standalone/harddrake2:454
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "알 수 없음|일반"

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr ""

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "기다려 주세요... 설정을 적용하고 있습니다."

#: harddrake/sound.pm:228
#, c-format
msgid "No alternative driver"
msgstr ""

#: harddrake/sound.pm:229
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: harddrake/sound.pm:235
#, c-format
msgid "Sound configuration"
msgstr "사운드 설정"

#: harddrake/sound.pm:237
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:242
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: harddrake/sound.pm:244
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "드라이버:"

#: harddrake/sound.pm:263
#, c-format
msgid "Trouble shooting"
msgstr ""

#: harddrake/sound.pm:271
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:279
#, c-format
msgid "No open source driver"
msgstr ""

#: harddrake/sound.pm:280
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""

#: harddrake/sound.pm:283
#, c-format
msgid "No known driver"
msgstr ""

#: harddrake/sound.pm:284
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: harddrake/sound.pm:288
#, c-format
msgid "Unknown driver"
msgstr "알 수 없는 드라이버"

#: harddrake/sound.pm:289
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""

#: harddrake/sound.pm:303
#, c-format
msgid "Sound trouble shooting"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:306
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:332
#, c-format
msgid "Let me pick any driver"
msgstr ""

#: harddrake/sound.pm:335
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:338
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "자동 검색"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "알 수 없음|일반"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""

#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "카드 모델:"

#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr "튜너 유형:"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr "캡쳐 버퍼 수:"

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr "PLL 설정:"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "라디오 지원:"

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "라디오 지원"

#: help.pm:11
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"더 진행하기 전에 사용자 계약서를 자세하게 읽어 보세요.\n"
"사용자 계약서는 전체 맨드리바 리눅스 배포본을 포괄하는 내용이며,\n"
"만약 동의하지 않으신다면 「거부」버튼을 누르세요. 거부 버튼은 현재 설치를\n"
"즉각 종료하게 합니다. 설치를 계속하고 싶다면 「동의」버튼을 누르세요."

#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "동의"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "사용자명"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:383 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "다음"

#: help.pm:51
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "aboot를 사용하시겠습니까?"

#: help.pm:54
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"선택된 하드디스크상의 기존 리눅스 파티션이 위에 열거되어 있습니다.\n"
"마법사에 의해 이미 설정된 사항을 보존할 수도 있으며, 이는 대부분의 일반\n"
"설치에 적절한 설정입니다. 만약 직접 변경하시겠다면, 최소한 루트 파티션"
"(「/」)\n"
"은 반드시 지정해야 합니다. 너무 작은 파티션을 선택하지는 마세요. 충분한 소프"
"트웨어\n"
"를 설치하지 못하는 수가 있습니다. 만약 개인 데이터가 별도의 파티션에 저장되도"
"록\n"
"하고 싶다면, 「/home」파티션을 별도로 만드세요.(오직 리눅스 파티션이 둘 이상"
"일\n"
"경우에만 가능합니다.)\n"
"\n"
"각 파티션은 다음과 같이 열거됩니다: 「이름」,「용량」.\n"
"\n"
"「이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n"
"「파티션 번호」(가령, 「hda1」).\n"
"\n"
"「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n"
"SCSI 디스크일 경우에는 「sd」입니다.\n"
"\n"
"「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n"
"IDE 하드디스크의 경우:\n"
"\n"
"  ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"  ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI "
"ID」\n"
"와 같은 식으로 의미를 가집니다."

#: help.pm:85
#, fuzzy, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"맨드리바 리눅스 설치 시스템은 여러 장의 CD로 구성되어 있습니다.\n"
"드레이크X는 선택된 각각의 팩키지가 어느 CD에 들어 있는지 이미 알고 있습니"
"다.\n"
"필요시 현재 CD를 자동으로 꺼내고 다른 CD의 삽입을 요청할 것입니다."

#: help.pm:92
#, fuzzy, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"이제 시스템상에 설치할 프로그램들을 지정할 차례입니다.\n"
"맨드리바 리눅스에는 설치할 수 있는 수천 개의 프로그램들이 있기 때문에\n"
"사용자가 그것들을 모두 다 알지는 못할 것입니다.\n"
"\n"
"만약 표준 CD 설치를 수행하고 있는 중이라면, 현재 가지고 있는 CD들에 대해\n"
"질문할 것입니다. 가지고 있는 CD들의 라벨을 확인하고 현재 님의 상황에 맞는\n"
"선택 상자를 지정하세요. 계속할 준비가 되었으면, 「확인」을 누르세요.\n"
"\n"
"팩키지들은 용도에 따라 그룹으로 나열되어 있습니다.\n"
"그룹들 자체는 또다시 네 개의 영역으로 나열되어 있습니다:\n"
"\n"
"  ○ 「워크스테이션」: 시스템을 워크스테이션으로 사용할 계획이라면,\n"
"하나 이상의 해당 그룹을 선택하세요.\n"
"\n"
"  ○ 「개발」: 시스템을 프로그래밍의 용도로 사용하려 한다면, 원하는 그룹들을\n"
"선택하세요.\n"
"\n"
"  ○ 「서버」: 끝으로, 시스템이 서버되기를 원한다면, 여기서 대부분의 일반 서비"
"스들이\n"
"설치되도록 선택할 수 있습니다.\n"
"\n"
"  ○ 「그래픽 환경」: 여기는 님이 선호하는 그래픽 환경을 선택하는 곳입니다.\n"
"그래픽 환경 워크스테이션을 원한다면, 최소한 하나는 선택해야 합니다!\n"
"\n"
"마우스 포인터를 그룹 이름들 위로 올리면, 해당 그룹에 대한 작은 풍선 도움말"
"을\n"
"보여 줄 것입니다.\n"
"\n"
"「개별 팩키지 선택」옵션을 선택할 수도 있습니다.\n"
"이 옵션은 님이 제공되어지는 팩키지들에 대해 잘 알고 있거나, 설치되는 팩키지들"
"에 대한\n"
"총체적인 제어를 원할 경우에 유용할 것입니다.\n"
"\n"
"만약 님이 「업데이트」모드로 설치를 시작했다면, 기존에 설치되지 않은 팩키지들"
"이\n"
"설치되는 것을 막기위해 모든 그룹을 선택해제할 수 있습니다. 이렇게 하는 것은\n"
"기존 시스템을 업데이트하거나 고치기 위한 좋은 방법입니다."

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "워크스테이션"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "개발"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "그래픽 환경"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr "개별 팩키지 선택"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "업그레이드"

#: help.pm:146 install_steps_interactive.pm:604
#, c-format
msgid "With X"
msgstr ""

#: help.pm:146
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "문서"

#: help.pm:146
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "최소 설치"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:946
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:312 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "아니오"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:946 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:311 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "예"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "설정"

#: help.pm:189
#, fuzzy, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"이제 부팅시에 어떤 서비스를 자동으로 시작하게 할지를 선택해야 합니다.\n"
"\n"
"현재 설치된 모든 서비스들이 여기에서 보여지고 있습니다.\n"
"신중하게 검토해서 부팅시에 항상 필요로하는 것이 아니라면 선택을 해제하세요.\n"
"\n"
"마우스를 서비스 이름들 위로 올리면, 각 서비스에 대한 간단한 설명을 보여 줄 것"
"입니다.\n"
"만약 어떤 서비스가 필요한 것인지 아닌지를 잘 모르겠다면,\n"
"기본값으로 그냥 두는 것이 안전한 선택입니다.\n"
"\n"
"이 컴퓨터를 서버용으로 사용하려 한다면, 이 단계에서 매우 주의해야 합니다.\n"
"필요하지 않은 서비스가 시작되는 것은 바람직하지 않습니다. 일부 서비스는 \n"
"서버상에서 실핸된다면 위험할 수도 있다는 것을 명심하세요. 원칙적으로 \n"
"꼭 필요한 서비스들만 선택하세요."

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217 install_steps_interactive.pm:888
#, c-format
msgid "Hardware clock set to GMT"
msgstr "하드웨어 시계 GMT 설정"

#: help.pm:217
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "자동 시간 동기화 (NTP 사용)"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""

#: help.pm:308
#, fuzzy, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"마지막으로, 부팅시에 자동으로 그래픽 환경을 사용할 것인지를 질문할 것입니"
"다.\n"
"주의: 이 질문은 설정을 테스트하지 않았을지라도 나타나게 될 것입니다.\n"
"시스템을 확실히 서버용으로 사용할 것이거나, 화면 설정에 성공하지 못한 경우라"
"면\n"
"「아니오」를 누르세요."

#: help.pm:316
#, fuzzy, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"이제 하드디스크의 어디에 리눅스 맨드리바를 설치할지를\n"
"선택해야 합니다. 만약 하드디스크가 완전히 비어 있거나 또는\n"
"다른 운영체제가 하드디스크 전체를 점유하고 있다면, 파티션을\n"
" 나누어야 합니다. 파티션을 나눈다함은 리눅스 맨드리바가\n"
"설치될 공간을 확보하기 위하여 디스크를 논리적으로 분할한다는 의미입니다.\n"
"\n"
"일반적으로 파티션 과정을 거쳐 버리면 기존 데이터의 복구가 불가능해지기\n"
"때문에,초보자에게는 고민스럽고 걱정스러운 작업입니다. 하지만 마법사를\n"
"사용하면 이 작업을 쉽게 할 수 있습니다. 시작하기 전에, 충분한 시간을 가지고\n"
"사용자 설명서를 읽어 보세요.\n"
"\n"
"현재 전문가 모드로 설치를 진행 중이라면, 리눅스 맨드리바의 파티션 분할 도구"
"인\n"
"디스크드레이크를 만나게 될 것입니다. 이 도구는 파티션드르이 세밀한 조정을 가"
"능하게\n"
"합니다. 설명서의 디스크드레이크 장을 보세요; 사용법이 동일합니다. 위에서 언급"
"했듯이\n"
"화면에 있는 「마법사」버튼을 눌러서, 파티션 분할 작업을 위한 마법사를\n"
"실행할 수도 있습니다.\n"
"\n"
"만약 이전에 리눅스를 설치한 적이 있거나 다른 파티션 도구로 만들어 놓은 리눅스"
"용\n"
"파티션들이 이미 존재한다면, 리눅스 설치에 사용할 파티션들을\n"
"선택만 하면 됩니다.\n"
"\n"
"만약 아직 리눅스용 파티션이 없다면, 새로 만들어야 합니다. 그러기 위해서는\n"
"위에 있는 마법사를 사용하세요. 하드디스크의 설정에 따라 다음과 같은\n"
"몇 가지의 방법이 있습니다:\n"
"\n"
" ○ 빈 공간 사용: 빈 디스크의 자동 파티션 분할 작업을 하게 됩니다.\n"
"파티션 분할 작업에 대해 더 이상 신경쓸 필요가 없게 됩니다.\n"
"\n"
" ○ 기존 파티션 사용: 마법사가 기존의 리눅스 파티션을 발견한 경우입니다.\n"
"기존의 파티션에다가 리눅스를 설치할려면, 이것을 선택하세요.\n"
"\n"
" ○ 윈도우즈 파티션의 빈 공간 사용: 만약 MS 윈도우즈가 설치되어 있고 모든 디스"
"크 공간을 사용하고 있다면,\n"
"리눅스용 공간을 새로 만들어야 합니다. 이렇게 하기위해서는, 윈도우즈 파티션을 "
"지우거나(「전체 디스크 삭제」\n"
"와 「전문가 모드」부분을 참조하세요.), 윈도우즈 파티션의 크기를 재조정하여 공"
"간을 확보할 수 있습니다. 윈도우즈\n"
"파티션의 재조정은 기존의 데이터를 파괴하지 않기 때문에, 윈도우즈와 리눅스 맨"
"드레이크를 한 컴퓨터에서 함께\n"
"사용하고자 한다면  이것이 권장되는 방법입니다.\n"
"\n"
"이 방법을 선택한다면, 윈도우즈 파티션의 크기가 현재보다 줄어들기 때문에 윈도"
"우즈를\n"
"사용할 때에는 소프트웨어를 설치하거나 데이터를 저장할 빈 공간이 그만큼 적어진"
"다는\n"
"것을 유념하세요.\n"
"\n"
" ○ 전체 디스크 삭제: 만약 디스크상의 모든 기존 파티션과 데이터를 삭제하고\n"
"리눅스 맨드리바를 위한 파티션으로 바꾸고 싶다면, 이것을 선택하세요.\n"
"주의하세요: 일단 이렇게 하고나면 다시 되돌릴 수 없습니다.\n"
"\n"
"   !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n"
"\n"
" ○ 윈도우즈 제거: 디스크상의 모든 파티션을 삭제하고, 초기화된 디스크 상태에"
"서\n"
"파티션 작업을 다시 합니다. 디스크상의 모든 데이터는 손실됩니다.\n"
"\n"
"   !! 이 옵션을 선택하게 되면, 디스크상의 모든 데이터가 손실됩니다. !!\n"
"\n"
" ○ 전문가 모드: 만약 수동으로 파티션 작업을 하고자 한다면, 이것을 선택하세"
"요.\n"
"이 방법은 대단히 강력하지만 또한 위험할 수 있다는 것을 명심하세요. 쉽게 데이"
"터를\n"
"잃어 버릴 수 있습니다. 전문적인 지식이 없다면, 이 방법은 절대 선택하지 마세"
"요."

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "빈 공간 사용"

#: help.pm:374
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "기존의 파티션 사용"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "윈도우즈 파티션의 빈 공간 사용하세요."

#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "전체 디스크 삭제"

#: help.pm:374
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "윈도우즈(TM) 제거"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "사용자 정의 파티션 나누기"

#: help.pm:377
#, fuzzy, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"설치를 완료하였습니다. 님의 GNU/리눅스 시스템은 이제 사용할 준비가\n"
"되었습니다. 시스템을 다시 부팅하려면 「확인」을 누르세요.\n"
"컴퓨터가 다시 부팅되면, (다중 부팅이 설정되었을 경우에) 님이 선호하는\n"
"운영체제를 시작할 수 있습니다.\n"
"\n"
"「고급」버튼(점문가 모드에만 있음)을 누르면 두 개의 추가 버튼이 나타넙니다:\n"
"\n"
"  ○ 「자동 설치 플로피 생성」: 님이 지금까지 설치한 내용을 관리자의 별다른\n"
"도움없이 자동으로 전체 설치를 수행하게 하는\n"
"자동 설치 플로피 디스크를 만듭니다.\n"
"\n"
"    주의: 버튼을 누르면 두 개의 개별적인 옵션이 나타납니다:\n"
"\n"
"    ○ 「재생」: 파티션 나누기 작업만 제외하고, 나머지 과정은 자동설치로\n"
"수행하는 자동설치 플로피를 만듭니다.\n"
"\n"
"    ○ 「자동화」: 디스크상의 모든 데이터를 삭제하고 모든 파티션이 다시\n"
"만들어지는 완벽한 자동 설치를 수행하는 플로피를 만듭니다.\n"
"\n"
"    이 기능을 사용하면, 많은 수의 비슷한 컴퓨터에 설치작업을 할 때 편리합니"
"다.\n"
"    자세한 정보는 저희 윕사이트의 자동설치관련 부분을 참조하세요.\n"
"\n"
"  ○ 「팩키지 선택사항 저장」(*): 앞 단계에서 선택한 팩키지 목록을 저장합니"
"다.\n"
"또 다른 설치를 수행할 때, 플로피를 드라이브에 넣고, [F1]키를 눌러서\n"
"설치 화면이 도움말 화면으로 들어가게 한후, 「linux defcfg=\"floppy\"」라고\n"
"입력하세요.\n"
"\n"
"(*) 님은 FAT으로 포맷된 플로피 하나를 가지고 있어야 합니다.\n"
"      (리눅스에서 포맷하려면, 「mformat a:」명령을 사용하세요.)"

#: help.pm:409
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "자동 설치 플로피 디스크 생성"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Replay"
msgstr "재시도"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Automated"
msgstr "자동"

#: help.pm:409 install_steps_interactive.pm:1346
#, c-format
msgid "Save packages selection"
msgstr "선택된 팩키지 목록 저장"

#: help.pm:412
#, fuzzy, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"새로 만들어진 파티션들은 포맷되어져야 합니다.\n"
"(포맷이라 함은 파일 시스템을 만든다는 의미입니다.)\n"
"\n"
"지금 기존의 데이터를 삭제하기 위해서 기존 파티션들을\n"
"다시 포맷할 수도 있습니다. 그렇게 하고 싶다면, 해당 파티션들도\n"
"선택하세요.\n"
"\n"
"주의: 모든 기존 파티션들을 다시 포맷할 필요는 없습니다.\n"
"(「/」,「/usr」,「/var」와 같은) 운영체제를 담고 있는 파티션들은\n"
"다시 포맷하더라도, (「/home」과 같은) 데이터를 단고 있는 파티션들은\n"
", 기존 데이터를 보존하고 싶을 경우, 다시 포맷할 필요가 없습니다.\n"
"\n"
"파티션들을 선택할 때 주의하세요. 일단 포팩이 되고나면,\n"
"선택됐던 파티션상에 존재했던 모든 데이터는 삭제되며,\n"
"복구가 불가능해 집니다.\n"
"\n"
"포맷할 준비가 되었으면, 「확인」을 누르세요.\n"
"\n"
"맨드리바 리눅스 설치용 파티션을 다시 선택하고 싶다면,\n"
"「취소」를 누르세요.\n"
"\n"
"디스크상의 손상된 블럭을 체크하며 포맷하고 싶다면,\n"
"「고급」을 누르세요."

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "이전"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "설치"

#: help.pm:447
#, fuzzy, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"이제 컴퓨터의 보안 수준을 선택할 단계입니다.\n"
"자유로운 사용을 위해서는 컴퓨터가 보다 더 많이 개방되어져야 하며,\n"
"저장된 데이터의 중요성이 크면 클수록, 더 높은 보안 수준이 유지되어야 합니"
"다.\n"
"그러나 일반적으로 보다 높은 보안 수준은 보다 많은 사용상의 불편함을 감수해야"
"만\n"
"이루어질 수 있음을 유념하세요. 각 보안 수준이 의미하는 바에 대한 자세한 정보"
"를\n"
"알고 싶다면 「사용자 지침서」의 MSEC 장을 참조하세요.\n"
"\n"
"어느 것을 선택해야 할지 잘 모르겠다면, 기본값을 유지하세요."

#: help.pm:458
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "보안 관리자 (로그인 또는 이메일)"

#: help.pm:461
#, fuzzy, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"이제 어느 파티션이 맨드리바 리눅스의 설치용으로 사용되어야 할지를\n"
"선택해야 합니다. 이전에 다른 GNU/리눅스를 설치한 적이 있거나, 다른 파티션\n"
"도구를 사용하여 이미 파티션들이 정의되어 있다면, 기존 파티션을 그대로 사용\n"
"할 수 있습니다. 그렇지 않다면 하드디스크의 파티션들을 지금 만들어야 합니다.\n"
"\n"
"파티션을 만들려면, 먼저 하드디스크를 선택하세요. 파티션을 만들여는 하드디스크"
"가\n"
"첫 번째 IDE 디스크라면 「hda」, 두 번째 IDE 디스크라면 「hdb」와 같은 식이"
"며,\n"
"첫 번째 SCSI 디스크라면 「sda」와 같은 식입니다.\n"
"\n"
"파티션을 나눌 때, 다음 옵션을 사용할 수 있습니다:\n"
"\n"
"  ○ 「모두 삭제」: 선택된 디스크의 모든 기존 파티션을 삭제합니다.\n"
"\n"
"  ○ 「자동 할당」: 선택된 디스크의 빈 공간에 자동으로 EXT2와 스왑 파티션을\n"
"할당합니다.\n"
"\n"
"  ○ 「파티션 테이블 복구」: 파티션 테이블이 손상되어 있을 경우, 이 옵션으로\n"
"손산된 테이블을 복구합니다. !!주의!! 복구시도가 실패할 수도 있다는 것을\n"
"명심하세요.\n"
"\n"
"  ○ 「되돌리기」: 변경 사항을 취소합니다.\n"
"\n"
"  ○ 「다시 읽기」: 모든 변경 사항을 취소하고, 초기 파티션 테이블을 다시 읽습"
"니다.\n"
"\n"
"  ○ 「마법사」: 마법사를 실행하여 파티션을 나눕니다. 파티션 나누기에 대한 지"
"식이\n"
"부족하다면, 이 옵션을 사용하세요.\n"
"\n"
"  ○ 「플로피로부터 복구」: 이전에 플로피에 저장해둔 파티션 정보을 사용하여\n"
"파티션 테이블을 복구합니다.\n"
"\n"
"  ○ 「플로피에 저장」: 파티션 정보를 플로피에 저장합니다. 다음에 파티션 테이"
"블을 복구할\n"
"일이 생길 때 사용됩니다. 이 과정을 수행할 것을 권장하는 바입니다.\n"
"\n"
"  ○ 「완료」: 파티션 나누기 작업을 끝마치면, 이 옵션으로 변경 사항을 저장합니"
"다.\n"
"\n"
"정보: 키보드로 옵션을 선택할 수도 있습니다. 파티션들간의 이동은 [Tab]키와\n"
"[Up/Down]키를 사용하세요.\n"
"\n"
"파티션을 선택하고 난 후에는 다음 키를 사용할 수 있습니다:\n"
"\n"
"  ○ 「Ctrl + c」: (빈 파티션이 선택된 경우,) 새 파티션 만들기.\n"
"\n"
"  ○ 「Ctrl + d」: 파티션 삭제하기.\n"
"\n"
"  ○ 「Ctrl + m」: 마운트 위치 지정하기.\n"
"\n"
"만약 PPC 컴퓨터에서 설치하고 있는 중이라면, YABOOT 부트로더가 사용할 최소 "
"1MB\n"
"의 HFS 「부트스트랩」파티션을 만들 필요가 있습니다. 만약 그 파티션을 보다 크"
"게\n"
"(가령, 50MB) 만들면, 응급 상황시에 사용할 여분의 커널과 램디스크 이미지를\n"
"저장할 수 있는 유용한 장소가 될 것입니다."

#: help.pm:530
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "탈착식 미디어 자동 마운트"

#: help.pm:530
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "일반 모드로 전환"

#: help.pm:533
#, fuzzy, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"둘 이상의 MS 윈도우즈 파티션이 디스크상에서 발견되었습니다.\n"
"맨드리바 리눅스 운영체제를 설치하기 위해 크기를 조정할\n"
"파티션을 선택하세요.\n"
"\n"
"각 파티션은 다음과 같이 열거됩니다: 「리눅스 이름」,「윈도우즈 이름」,\n"
"「용량」.\n"
"\n"
"「리눅스 이름」영역의 구조: 「하드디스크 유형」,「하드디스크 번호」,\n"
"「파티션 번호」(가령, 「hda1」).\n"
"\n"
"「하드디스크 유형」은, IDE 디스크일 경우에는 「hd」이며,\n"
"SCSI 디스크일 경우에는 「sd」입니다.\n"
"\n"
"「하드디스크 번호」는 항상 「hd」또는 「sd」뒤에 오는 문자입니다.\n"
"IDE 하드디스크의 경우:\n"
"\n"
"  ○ 「a」는 「주 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「b」는 「주 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"  ○ 「c」는 「보조 IDE 제어기상의 주 디스크」를 의미합니다.\n"
"\n"
"  ○ 「d」는 「보조 IDE 제어기상의 보조 디스크」를 의미합니다.\n"
"\n"
"SCSI 하드디스크의 경우, 「a」는 「최소 SCSI ID」, 「b」는 「다음 최소 SCSI "
"ID」\n"
"와 같은 식으로 의미를 가집니다.\n"
"「윈도우즈 이름」은 MS 윈도우즈하에서의 이름입니다.\n"
"(가령, 첫 번째 디스크 또는 파티션은 「C:」입니다.)"

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, fuzzy, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"일반적으로, 드레이크X는 (선택한 언어에 기반하여) 올바른 키보드를\n"
"자동으로 선택합니다. 그러나 사용하는 언어에 정확히 일치하는 키보드를\n"
"가지고 있지 않은 경우도 있을 수 있습니다: 가령, 영어를 사용하는 스위스인은\n"
"여전히 스위스 키보드를 원할 수도 있습니다. 또한 영어를 사용하지만, 캐나다 퀘"
"벡주에\n"
"살고 있다면 또한 이러한 경우가 될 것입니다. 이와 같은 경우라면, 이 단계에서\n"
"적당한 키보드를 목록에서 선택해야 합니다.\n"
"\n"
"지원되는 모든 키보드 목록을 보려면, 「추가정보」를\n"
"누르세요."

#: help.pm:609
#, fuzzy, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"설치시 그리고 시스템용으로 사용할 언어를 선택하세요.\n"
"\n"
"「고급」을 누르면, 다른 언어도 추가로 선택할 수 있습니다.\n"
"다른 언어도 선택하게 되면, 그 언어와 관련된 시스템 문서 및 프로그램 파일들"
"도\n"
"설치하게 됩니다. 가령, 님의 시스템을 일본인도 사용할 수 있도록 하고 싶다면,\n"
"목록에서 주 언어로 「한국어」를 선택하고, 「고급」에서 「일본어」에 해당하"
"는\n"
"회색 별표를 선택하세요.\n"
"\n"
"여러개의 추가 언어를 선택할 수도 있습니다. 언어 선택을 끝마쳤으면,\n"
"「확인」을 눌러서 계속 진행하세요."

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:650
#, fuzzy, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"기본적으로 드레이크X는 님이 2버튼 마우스를 사용한다고 가정할 것이며,\n"
"세 번째 버튼은 에뮬레이션할 것입니다. 마우스가 PS/2, 시리얼, 혹은 USB용인지"
"는\n"
"드레이크X가 자동으로 알아낼 수 있습니다.\n"
"\n"
"만약 다른 마우스 유형을 지정하고 싶다면, 제공되는 목록에서 적당한 것을\n"
"선택하세요.\n"
"\n"
"만약 다른 마우스를  선택하게 되면, 마우스 테스트 화면을 보게될 것입니다.\n"
"그러면, 마우스 버튼과 휠을 조작하여 설정이 정확하게 되었는지 확인하세요.\n"
"만약 제대로 작동하기 않으면,「취소」버튼 위에서 스페이스 키나 엔터 키를\n"
"누르고 다시 선택하시기 바랍니다."

#: help.pm:681
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "버튼 에뮬레이션"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"정확한 포트를 선택하세요. 예를 들어, MS 윈도우즈에서 COM1은\n"
"리눅스에서는 ttyS0로 명명됩니다."

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "사용자 인증"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pDQ"

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "전문가"

#: help.pm:768
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"드레이크X가 시스템상에 있는 모든 하드 디스크를 검색하고\n"
"또한 PCI SCSI 어댑터 탐지를 시도할 것입니다.\n"
"만약 드레이크X가 장치를 발견하게 되면 자동으로\n"
"올바른 드라이버를 설치할 것입니다.\n"
"\n"
"드레이크X의 장치 검색이 실패하더라도, 님께 SCSI 장치의 유무를 질문하게 됩니"
"다.\n"
"목록에서 장치를 직접 선택하려면 「예」를, SCSI 장치가 없다면 「아니오」를 선"
"택하세요.\n"
"잘 모르겠다면, 「하드웨어 정보 보기」를 선택한 후 「확인」을 눌러서\n"
"시스템상에 존재하는 하드웨어들을 살펴볼 수도 있습니다.\n"
"하드웨어에 대한 검토가 끝나면 다시 「확인」버튼을 눌러서 SCSI 인터페이스 질"
"문 화면\n"
"으로 돌아 올 수 있습니다.\n"
"\n"
"직접 어댑터를 지정해야 할 때에는, 드레이크X가 옵션을 지정할 것인지를 물어\n"
"볼 것입니다. 이 때는 드레이크X가 필요한 옵션을 탐지하도록 하는 것이 좋습니"
"다.\n"
"일반적으로 이 방법은 잘 작동합니다.\n"
"\n"
"\n"
"만약 그렇지 않다면, 직접 드라이버 옵션을 지정해야 합니다. 사용자 설명서(3"
"장, \n"
"「하드웨어에 대한 종합정보」색션)를 참조하여, 하드웨어 설명서, \n"
"(인터넷에 연결할 수 있다면) 제조업체 웹 사이트, \n"
"또는 (윈도우즈가 설치되어 있다면) MS 윈도우즈에서 어떻게 여기에 필요한 \n"
"정보를 알아 낼 수 있는지 찾아 보세요."

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
#: install_steps_interactive.pm:1037
#, c-format
msgid "Sound card"
msgstr "사운드 카드"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855 install_steps_interactive.pm:884
#: install_steps_interactive.pm:979 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "시간대"

#: help.pm:855 install_steps_interactive.pm:1053
#, c-format
msgid "TV card"
msgstr "TV 카드"

#: help.pm:855
#, fuzzy, c-format
msgid "ISDN card"
msgstr "내장 ISDN 카드"

#: help.pm:855
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "시작시 바로 X 실행"

#: help.pm:855 install_any.pm:1735 install_steps_interactive.pm:1071
#: standalone/drakbackup:2040
#, c-format
msgid "Network"
msgstr "네트웍"

#: help.pm:855 install_steps_interactive.pm:1083
#, fuzzy, c-format
msgid "Proxies"
msgstr "프로파일: "

#: help.pm:855 install_steps_interactive.pm:1094
#, c-format
msgid "Security Level"
msgstr "보안 등급"

#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr "방화벽"

#: help.pm:855 install_steps_interactive.pm:1124
#, fuzzy, c-format
msgid "Bootloader"
msgstr "사용할 부트로더"

#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "서비스"

#: help.pm:858
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"맨드리바 리눅스 파티션을 만들기 위해서 삭제할 하드디스클르 선택하세요.\n"
"주의:\n"
"디스크상의 모든 데이터는 손실되며, 영원히 복구가 불가능해 집니다!"

#: help.pm:863
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"이 하드디스크상의 모든 데이터와 파티션을 삭제하려면, 「확인」을 누르세요.\n"
"!!주의하세요!!일단 「확인」을 누르게 되면, MS 윈도우즈 데이털르 포함하여 이 "
"디스트상의 모든\n"
"데이터와 파티션은 복구가 불가능해 집니다.\n"
"\n"
"이 작업을 취소하려면, 지금 「취소」를 누르세요. 어떠한 데이터와 파티션도\n"
"손상되지 않을 것입니다."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "다음 ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- 이전"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr ""

#: install_any.pm:407
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "또 다른것이 설치되어 있습니까?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:410
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "또 다른 %s 인터페이스가 설치되어 있습니까?"

#: install_any.pm:423 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:423
#, fuzzy, c-format
msgid "Network (HTTP)"
msgstr "네트웍"

#: install_any.pm:423
#, fuzzy, c-format
msgid "Network (FTP)"
msgstr "네트웍"

#: install_any.pm:423
#, c-format
msgid "Network (NFS)"
msgstr ""

#: install_any.pm:453
#, c-format
msgid "Insert the CD 1 again"
msgstr ""

#: install_any.pm:479 network/netconnect.pm:857 standalone/drakbackup:114
#, c-format
msgid "No device found"
msgstr "장치를 찾을 수 없습니다"

#: install_any.pm:484
#, c-format
msgid "Insert the CD"
msgstr ""

#: install_any.pm:489
#, fuzzy, c-format
msgid "Unable to mount CD-ROM"
msgstr "분기할 수 없습니다: %s"

#: install_any.pm:522 install_any.pm:543
#, c-format
msgid "URL of the mirror?"
msgstr ""

#: install_any.pm:527
#, c-format
msgid "NFS setup"
msgstr ""

#: install_any.pm:527
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""

#: install_any.pm:528
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""

#: install_any.pm:528 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "디렉토리"

#: install_any.pm:581
#, fuzzy, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "%s를 열 수 없습니다: %s\n"

#: install_any.pm:658
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr ""

#: install_any.pm:700
#, c-format
msgid "Looking at packages already installed..."
msgstr "이미 설치된 팩키지 찾는 중..."

#: install_any.pm:704
#, c-format
msgid "Finding packages to upgrade..."
msgstr "업그레이드할 팩키지를 검색중입니다."

#: install_any.pm:782
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"CDROM을 바꿔 주세요!\n"
"\n"
"「%s」라고 쓰여진 CDROM을 드라이브에 넣은 후, 「확인」을 눌러 주세요."

#: install_any.pm:794
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "검색 진행 중"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:937
#, fuzzy, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"다음과 같은 서버들이 선택되었습니다: %s\n"
"\n"
"\n"
"이 서버들은 기본적으로 활성화됩니다. 비록 아직까지 알려진 보안 문제는 없지"
"만,\n"
"새로운 문제점이 발견될 수도 있습니다. 그럴 경우에는 가능한 한 신속하게\n"
"업그레이드해야 합니다.\n"
"\n"
"\n"
"정말로 이 서버들을 설치합니까?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:960
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: install_any.pm:1396 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "%s 파일을 읽는중 오류가 발생했습니다."

#: install_any.pm:1630
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "다음 팩키지들이 설치될 것입니다."

#: install_any.pm:1632
#, c-format
msgid "%s (previously named as %s)"
msgstr ""

#: install_any.pm:1672
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"오류 발생 - 새로운 파일 시스템을 만들 어떤 올바른 장치도 찾을 수 없습니다.이 "
"문제를 해결하시려면, 하드웨어를 점검해 보시기 바랍니다."

#: install_any.pm:1716
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1716
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1716
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1739
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "선택하세요"

#: install_any.pm:1755
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "파일이 이미 존재합니다. 덮어쓸까요?"

#: install_any.pm:1759
#, c-format
msgid "Permission denied"
msgstr "권한이 없습니다."

#: install_any.pm:1808
#, c-format
msgid "Bad NFS name"
msgstr ""

#: install_any.pm:1829
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "파일 %s 읽어들임"

#: install_any.pm:1879
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "파티션을 나누기 전에는 스크린샷을 만들 수 없습니다."

#: install_any.pm:1886
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "스크린샷은 설치후에 %s에 있습니다."

#: install_gtk.pm:136
#, fuzzy, c-format
msgid "System installation"
msgstr "SILO 설치"

#: install_gtk.pm:139
#, fuzzy, c-format
msgid "System configuration"
msgstr "경고 설정"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"「상업용」드라이버를 필요로하는 일부 하드웨어가 시스템상에 있습니다.\n"
"자세한 정보는 다음을 참조하세요: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"루트 파티션이 반드시 필요합니다.\n"
"이를 위해서, 파티션을 생성하세요. (이미 있는 파티션을 클릭하거나).\n"
"그리고 나서, ``마운트 위치''를 클릭한후 '/'으로 설정하세요."

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"스왑 파티션이 없습니다.\n"
"\n"
"계속 진행합니까?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "「/boot/efi」에 마운트된 FAT 파티션이 있어야만 합니다."

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "새로운 파티션을 만들 수 있는 공간이 부족합니다."

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "기존의 파티션 사용"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "사용할 기존의 파티션이 없습니다."

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "윈도우즈 파티션을 루프백으로 사용"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "어느 파티션을 Linux4Win용으로 사용하겠습니까?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "크기 선택"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "루트 파티션 크기(MB): "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "스왑 파티션 크기(MB): "

#: install_interactive.pm:130
#, fuzzy, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"loopback로 사용하거나 크기를 조정할 FAT 파티션이 없습니다. (또는 디스크 공간"
"이 부족합니다.)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "어떤 파티션의 크기를 조정하시겠습니까?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT 크기 조정기가 님의 파티션을 처리할 수 없습니다.\n"
"다음의 오류가 발생했습니다: %s"

#: install_interactive.pm:156
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "윈도우즈 파티션의 빈 공간 사용하세요."

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"윈도우즈 파티션이 심하게 조각나 있습니다. 먼저 ``디스크 조각 모음''을 하세요."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"경고!\n"
"\n"
"드레이크X가 이제 윈도우즈 파티션의 크기를 조정할 것입니다. 이 작동은 \n"
"위험합니다. 아직 시작하지 않았다면, 설치를 중단하고 윈도우즈에서\n"
"디스크검사」(가능하다면 또한 「디스크 조각모음」)를 실행한 후에,\n"
"설치를 다시 시작하세요. 또한 데이터도 백업해 두세요.\n"
"준비됐으면, 「확인」을 누르세요."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "윈도우즈용으로 어느 용량을 유지하시겠습니까?"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "파티션 %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "윈도우즈 파일 시스템의 범위 계산중"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT크기조정 실패: %s"

#: install_interactive.pm:208
#, fuzzy, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
"loopback로 사용하거나 크기를 조정할 FAT 파티션이 없습니다. (또는 디스크 공간"
"이 부족합니다.)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "윈도우즈(TM) 제거"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"하드 드라이브가 하나 이상 있습니다. 어느 것에 리눅스를 설치하시겠습니까?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "%s 드라이브 상의 모든 기존 파티션과 데이터가 손실될 것입니다."

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "fdisk 사용"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"이제 %s의 파티션 작업을 할 수 있습니다.\n"
"마친 후, 'w'를 눌러 저장하는것을 잊지마세요."

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "설치에 필요한 공간을 찾을 수 없습니다."

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "드레이크X 파티션 마법사가 다음의 솔루션을 발견했습니다:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "파티션 나누기 실패: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "네트웍 활성화 중..."

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "네트웍 해제 중..."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"축하합니다. 설치가 성공적으로 끝났습니다.\n"
"부트 미디어를 제거하고 리턴을 눌러서 리부팅 하세요.\n"
"\n"
"\n"
"이 버전의 맨드리바 리눅스의 버그수정 정보는\n"
"%s\n"
"에서 얻으실 수 있습니다.\n"
"\n"
"\n"
"설치후 시스템 설정에 대한 정보는 공식 맨드리바 리눅스 유저 가이드를\n"
"참고하시기 바랍니다."

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "마운트 포인트 중복 %s"

#: install_steps.pm:481
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"일부 중요한 팩키지들이 올바르게 설치되지 않았습니다.\n"
"CDROM 드라이브 또는 미디어가 손상되었습니다.\n"
"이미 설치가 완료된 컴퓨터에서 「rpm -qpl media/main/*.rpm」명령으로 점검해 보"
"세요.\n"

#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "%s 단계로 넘어갑니다.\n"

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"시스템의 자원이 부족합니다. 리눅스 맨드리바를 설치하는데 일부 문제가 발생할\n"
"수도 있습니다. 만약 문제가 발생하면, 택스트 모드로 설치를 시도해 보세요.\n"
"텍스트 모드로 설치하려면, CDROM으로 부팅후 「F1」을 누르고 「text」라고 입력"
"하세요."

#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
#, c-format
msgid "Package Group Selection"
msgstr "팩키지 그룹 선택"

#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
#, c-format
msgid "Total size: %d / %d MB"
msgstr "전체 크기: %d / %d MB"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "잘못된 팩키지"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "버전: "

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "크기: "

#: install_steps_gtk.pm:302
#, fuzzy, c-format
msgid "%d KB\n"
msgstr "크기: %d KB\n"

#: install_steps_gtk.pm:303
#, c-format
msgid "Importance: "
msgstr "중요도: "

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "이 팩키지를 선택/버림 할수 없습니다."

#: install_steps_gtk.pm:340 network/thirdparty.pm:329
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "kdesu가 없음"

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:343
#, c-format
msgid "in order to keep %s"
msgstr ""

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr "디스크 공간이 부족하기 때문에 이 팩키지를 선택할 수 없습니다."

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "다음 팩키지들이 설치될 것입니다."

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "다음 팩키지들이 제거될 것입니다."

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "이것은 필수적인 팩키지입니다. 반드시 선택되어야 합니다."

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "이 팩키지를 선택해제할 수 없습니다. 이미 설치 되었습니다."

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"이 팩키지는 반드시 업그레이드되어야 합니다.\n"
"정말로 선택을 해제하시겠습니까?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "이 팩키지를 선택해제할수 없습니다. 반드시 업그레이드되어야 합니다."

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr "자동으로 선택된 팩키지들 보이기"

#: install_steps_gtk.pm:394
#, fuzzy, c-format
msgid "Load/Save selection"
msgstr "선택 이동"

#: install_steps_gtk.pm:395
#, c-format
msgid "Updating package selection"
msgstr "선택된 팩키지 목록 업데이트 중"

#: install_steps_gtk.pm:400
#, c-format
msgid "Minimal install"
msgstr "최소 설치"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
#, c-format
msgid "Choose the packages you want to install"
msgstr "설치하고자 하는 팩키지를 선택하세요."

#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
#, c-format
msgid "Installing"
msgstr "설치중"

#: install_steps_gtk.pm:457
#, fuzzy, c-format
msgid "No details"
msgstr "상세설명"

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "남은 시간 "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "계산 중"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d 팩키지"

#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738
#, c-format
msgid "Refuse"
msgstr "거부"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"CDROM을 바꿔 주세요!\n"
"\n"
"「%s」라고 쓰여진 CDROM을 드라이브에 넣은 후, 「확인」을 눌러 주세요.\n"
"만약 CDROM을 가지고 있지 않다면, 「취소」를 눌러 추가 설치를 취소하세요."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
#, c-format
msgid "There was an error ordering packages:"
msgstr "팩키지를 정렬하는 중 오류발생:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
#, c-format
msgid "There was an error installing packages:"
msgstr "다음 팩키지를 설치중 오류가 발생했습니다: "

#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
#: install_steps_interactive.pm:757
#, c-format
msgid "Go on anyway?"
msgstr "계속 진행합니까?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
#, c-format
msgid "Summary"
msgstr "요약설명"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
#: install_steps_interactive.pm:1084
#, fuzzy, c-format
msgid "not configured"
msgstr "재설정"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr ""

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "사용 동의서"

#: install_steps_interactive.pm:89
#, fuzzy, c-format
msgid "Release Notes"
msgstr "릴리즈:"

#: install_steps_interactive.pm:120
#, c-format
msgid "Please choose your keyboard layout."
msgstr "키보드 레이아웃 선택을 선택하세요."

#: install_steps_interactive.pm:122
#, fuzzy, c-format
msgid "Here is the full list of available keyboards"
msgstr "지원되는 키보드 목록이 여기에 있습니다."

#: install_steps_interactive.pm:152
#, fuzzy, c-format
msgid "Install/Upgrade"
msgstr "설치/업데이트"

#: install_steps_interactive.pm:153
#, fuzzy, c-format
msgid "Is this an install or an upgrade?"
msgstr "설치합니까 아니면 업데이트 합니까?"

#: install_steps_interactive.pm:159
#, fuzzy, c-format
msgid "Upgrade %s"
msgstr "업그레이드"

#: install_steps_interactive.pm:172
#, fuzzy, c-format
msgid "Encryption key for %s"
msgstr "암호화 키"

#: install_steps_interactive.pm:195
#, c-format
msgid "Please choose your type of mouse."
msgstr "마우스 종류를 선택하세요."

#: install_steps_interactive.pm:196
#, c-format
msgid "Mouse choice"
msgstr ""

#: install_steps_interactive.pm:205 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "마우스 포트"

#: install_steps_interactive.pm:206 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?"

#: install_steps_interactive.pm:216
#, c-format
msgid "Buttons emulation"
msgstr "버튼 에뮬레이션"

#: install_steps_interactive.pm:218
#, c-format
msgid "Button 2 Emulation"
msgstr "버튼 2 에뮬레이션"

#: install_steps_interactive.pm:219
#, c-format
msgid "Button 3 Emulation"
msgstr "버튼 3 에뮬레이션"

#: install_steps_interactive.pm:240
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:240
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "PCMCIS 카드 환경설정중..."

#: install_steps_interactive.pm:247
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:247
#, c-format
msgid "Configuring IDE"
msgstr "IDE 설정중"

#: install_steps_interactive.pm:267
#, c-format
msgid "No partition available"
msgstr "사용가능한 파티션이 없습니다."

#: install_steps_interactive.pm:270
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "마운트 위치를 찾기위해 파티션들을 검색 중"

#: install_steps_interactive.pm:277
#, c-format
msgid "Choose the mount points"
msgstr "마운트 위치를 선택해 주세요."

#: install_steps_interactive.pm:323
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"1MB 부트스트랩 공간 부족! 설치는 계속할 수 있지만, 시스템을 부팅하기 위해서"
"는 디스크드레이크에서 부트스트랩 파티션을 만들어야 합니다."

#: install_steps_interactive.pm:328
#, fuzzy, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""
"1MB 부트스트랩 공간 부족! 설치는 계속할 수 있지만, 시스템을 부팅하기 위해서"
"는 디스크드레이크에서 부트스트랩 파티션을 만들어야 합니다."

#: install_steps_interactive.pm:364
#, c-format
msgid "Choose the partitions you want to format"
msgstr "포맷할 파티션을 선택하세요"

#: install_steps_interactive.pm:366
#, c-format
msgid "Check bad blocks?"
msgstr "배드 블럭 검사를 합니까?"

#: install_steps_interactive.pm:394
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:397
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "스왑 메모리가 부족합니다. 좀 더 추가하세요."

#: install_steps_interactive.pm:406
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "유효한 팩키지 검색 및 RPM 데이터베이스 재조합 중..."

#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
#, c-format
msgid "Looking for available packages..."
msgstr "유효한 팩키지를 찾고 있습니다."

#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "팩키지를 받을 미러 사이트를 선택해 주세요."

#: install_steps_interactive.pm:468
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr "설치 또는 업그레이드를 위한 디스크 공간이 부족합니다. (%d > %d)"

#: install_steps_interactive.pm:502
#, fuzzy, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"플로피에 팩키지 선택목록을 적재 또는 저장할지를 선택하세요.\n"
"형식(포맷)은 자동설치 생성 플로피와 동일합니다."

#: install_steps_interactive.pm:504
#, c-format
msgid "Load"
msgstr "읽어들이기"

#: install_steps_interactive.pm:504 standalone/drakbackup:4055
#: standalone/drakbackup:4125 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "저장"

#: install_steps_interactive.pm:512
#, fuzzy, c-format
msgid "Bad file"
msgstr "파일 읽기"

#: install_steps_interactive.pm:585
#, c-format
msgid "Selected size is larger than available space"
msgstr "선택된 용량이 사용할 수 있는 공간보다 큽니다."

#: install_steps_interactive.pm:600
#, c-format
msgid "Type of install"
msgstr ""

#: install_steps_interactive.pm:601
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: install_steps_interactive.pm:605
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""

#: install_steps_interactive.pm:606
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: install_steps_interactive.pm:645 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "모두"

#: install_steps_interactive.pm:684
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"만약 아래에 열거된 모든 CD를 가지고 있다면, 「확인」을, \n"
"전혀 가지고 있지 않다면, 「취소」를, \n"
"일부만 가지고 있다면, 없는 CD를 선택해제한 후에 「확인」을 누르세요."

#: install_steps_interactive.pm:689
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "「%s」라고 표시된 CDROM"

#: install_steps_interactive.pm:714
#, c-format
msgid "Preparing installation"
msgstr "설치 준비중입니다"

#: install_steps_interactive.pm:722
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
" %s 팩키지 설치 중... \n"
"%d%%"

#: install_steps_interactive.pm:771
#, c-format
msgid "Post-install configuration"
msgstr "설치전 환경설정"

#: install_steps_interactive.pm:778
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""

#: install_steps_interactive.pm:812
#, c-format
msgid "Updates"
msgstr ""

#: install_steps_interactive.pm:813
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""

#: install_steps_interactive.pm:834
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr "유효한 미러 목록을 받기 위해 맨드리바 리눅스 웹사이트에 접속 중..."

#: install_steps_interactive.pm:853
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "사용가능한 팩키지의 리스트를 미러 사이트에 접속해서 받습니다."

#: install_steps_interactive.pm:857
#, fuzzy, c-format
msgid "Unable to contact mirror %s"
msgstr "분기할 수 없습니다: %s"

#: install_steps_interactive.pm:857
#, fuzzy, c-format
msgid "Would you like to try again?"
msgstr "인쇄 설정을 하시겠습니까?"

#: install_steps_interactive.pm:884 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "님의 시간대는 어디입니까?"

#: install_steps_interactive.pm:889
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "자동 시간 동기화 (NTP 사용)"

#: install_steps_interactive.pm:897
#, c-format
msgid "NTP Server"
msgstr "NTP 서버"

#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
#: install_steps_interactive.pm:1136 services.pm:133
#: standalone/drakbackup:1585
#, c-format
msgid "System"
msgstr "시스템"

#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
#: install_steps_interactive.pm:1063
#, c-format
msgid "Hardware"
msgstr "하드웨어"

#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
#, c-format
msgid "Remote CUPS server"
msgstr "원격 CUPS 서버"

#: install_steps_interactive.pm:998
#, c-format
msgid "No printer"
msgstr "프린터 없음"

#: install_steps_interactive.pm:1040
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "ISA 사운드 카드가 있습니까?"

#: install_steps_interactive.pm:1042
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""

#: install_steps_interactive.pm:1044
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: install_steps_interactive.pm:1064
#, fuzzy, c-format
msgid "Graphical interface"
msgstr "시작시 바로 X 실행"

#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
#, c-format
msgid "Network & Internet"
msgstr "네트웍과 인터넷"

#: install_steps_interactive.pm:1084
#, fuzzy, c-format
msgid "configured"
msgstr "재설정"

#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "보안"

#: install_steps_interactive.pm:1112
#, fuzzy, c-format
msgid "activated"
msgstr "지금 활성화"

#: install_steps_interactive.pm:1112
#, c-format
msgid "disabled"
msgstr "금지"

#: install_steps_interactive.pm:1123
#, c-format
msgid "Boot"
msgstr "부트"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s (%s 컴퓨터)"

# #msgid "Services: %d activated for %d registered"
# #msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨"
#: install_steps_interactive.pm:1141 services.pm:175
#, fuzzy, c-format
msgid "Services: %d activated for %d registered"
msgstr "서비스: 등록된 %2$d 중 %1$d 활성화됨"

#: install_steps_interactive.pm:1153
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""

#: install_steps_interactive.pm:1234
#, c-format
msgid "Preparing bootloader..."
msgstr "부트 로더 준비중"

#: install_steps_interactive.pm:1244
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""

#: install_steps_interactive.pm:1250
#, c-format
msgid "Do you want to use aboot?"
msgstr "aboot를 사용하시겠습니까?"

#: install_steps_interactive.pm:1253
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"aboot 설치 실패. \n"
"첫번째 파티션을 훼손할지라도 강제 설치할까요?"

#: install_steps_interactive.pm:1270
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "%s 드라이브에 빈 플로피 디스크를 넣으세요"

#: install_steps_interactive.pm:1304
#, fuzzy, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "부팅 플로피를 %s 드라이브에 넣으세요"

#: install_steps_interactive.pm:1306
#, c-format
msgid "Creating auto install floppy..."
msgstr "자동 설치 플로피 디스크 생성 중"

#: install_steps_interactive.pm:1318
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"몇몇 단계가 완전히 끝나지 않았습니다.\n"
"\n"
"정말 지금 종료 하시겠습니까?"

#: install_steps_interactive.pm:1328 standalone/draksambashare:422
#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
#: standalone/logdrake:452 standalone/logdrake:458
#, c-format
msgid "Congratulations"
msgstr "축하합니다."

#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
#, c-format
msgid "Generate auto install floppy"
msgstr "자동 설치 플로피 디스크 생성"

#: install_steps_interactive.pm:1338
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"자동 설치는 원한다면 완벽한 자동화가 가능합니다.\n"
"이럴 경우, 하드 드라이브를 점유해 버립니다!\n"
"(이것은 또 다른 컴퓨터에 동일하게 설치할 때를 위한 것입니다.)\n"
"\n"
"일반적으로 직접 설치하는 것이 좋습니다.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "리눅스-맨드리바 설치 %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
" <Tab>/<Alt-Tab> 항목간 이동        |  <Space> 선택      |  <F12> 다음 화면"

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "파일 선택"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1129 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "추가"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1086
#: standalone/draksambashare:1139 standalone/draksambashare:1178
#, c-format
msgid "Modify"
msgstr "변경"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1087
#: standalone/draksambashare:1147 standalone/draksambashare:1186
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "제거"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "기본"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "종료"

#: interactive/newt.pm:92
#, fuzzy, c-format
msgid "Do"
msgstr "아래로"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "잘못된 선택입니다, 다시 하세요\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "님의 선택은? (기본값 %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "님의 선택은? (0/1 기본값 「%s」) "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "버튼 「%s」: %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "이 버튼을 누르시겠습니까?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "님의 선택은? (기본값 「%s」%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "재전송"

#: keyboard.pm:171 keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "체코 (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "독일"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "드보락"

#: keyboard.pm:174 keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "스페인"

#: keyboard.pm:175 keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "핀란드"

#: keyboard.pm:176 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "프랑스"

#: keyboard.pm:177 keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "노르웨이"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "폴란드"

#: keyboard.pm:179 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "러시아"

#: keyboard.pm:181 keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "스웨덴"

#: keyboard.pm:182 keyboard.pm:317
#, c-format
msgid "UK keyboard"
msgstr "영국"

#: keyboard.pm:183 keyboard.pm:320
#, c-format
msgid "US keyboard"
msgstr "미국"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "알바니아"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "미국 (구버전)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "미국 (타자기)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "미국 (음성학)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr ""

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Azerbaidjani (라틴)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "벨기에"

#: keyboard.pm:192
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "미국 (타자기)"

#: keyboard.pm:193
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "허용"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "불가리아 (음성학)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "불가리아 (BDS)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "브라질 (ABNT-2)"

#: keyboard.pm:197
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "에스토니아"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "벨라루시아"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "스위스 (독어)"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "스위스 (불어)"

#: keyboard.pm:202
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "세르비아 (시릴)"

#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "체코 (QWERTY)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "독일 (dead 키 없음)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "덴마크"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "드보락(US)"

#: keyboard.pm:211
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "드보락(노르웨이)"

#: keyboard.pm:213
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "드보락(노르웨이)"

#: keyboard.pm:215
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "드보락(US)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "드보락(노르웨이)"

#: keyboard.pm:218
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "드보락(스웨덴)"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "드보락(스웨덴)"

#: keyboard.pm:220
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "에스토니아"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "에스토니아"

#: keyboard.pm:224
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "그리스"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "그루지아(러시아어)"

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "그루지아 (라틴)"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "그리스"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "크로아티아"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "헝가리"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr ""

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "이스라엘"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "이스라엘 (음성학)"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "이란"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "아이슬랜드"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "이탈리아"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""

#: keyboard.pm:244
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "일본 106키"

#: keyboard.pm:245
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "캐나다"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "한글 키보드"

#: keyboard.pm:250
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "미국 (음성학)"

#: keyboard.pm:251
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "영국"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "라틴 아메리카"

#: keyboard.pm:254
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "라트바아"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "리투아니아 AZERTY (구형)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "리투아니아 AZERTY (신형)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "리투아니아 (숫자열 QWERTY)"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "리투아니아 (음성학 QWERTY)"

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "라트바아"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr ""

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "마케도니아"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""

#: keyboard.pm:265
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "세르비아 (시릴)"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "네델란드"

#: keyboard.pm:270
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "수리남"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "폴란드 (QwertY)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "폴란드 (QwertZ)"

#: keyboard.pm:274
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "폴란드"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "포루투칼"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "캐나다 (퀘벡)"

#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "로만 (QWERTZ)"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "로만 (QWERTY)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "러시아 (음성학)"

#: keyboard.pm:283
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "드보락(노르웨이)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:286
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "태국"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "슬로베니아"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr ""

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "슬로바키아 (QWERTZ)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "슬로바키아 (QWERTY)"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "세르비아 (시릴)"

#: keyboard.pm:295
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "수리남"

#: keyboard.pm:296
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "미국 (음성학)"

#: keyboard.pm:297
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "벨기에"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr ""

#: keyboard.pm:300
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "미국 (타자기)"

#: keyboard.pm:301
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "태국"

#: keyboard.pm:302
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "태국"

#: keyboard.pm:304
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "태국"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr ""

#: keyboard.pm:308
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr ""

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "타지크 키보드"

#: keyboard.pm:312
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "독일"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "터기 (전통 「F」모델"

#: keyboard.pm:314
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "터키 (현대 「Q」모델"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "우크라이나"

#: keyboard.pm:319
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "수리남"

#: keyboard.pm:321
#, c-format
msgid "US keyboard (international)"
msgstr "US 키보드 (국제)"

#: keyboard.pm:322
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "세르비아 (시릴)"

#: keyboard.pm:324
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "베트남 (숫자열 QWERTY)"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "유고슬라비아 (라틴)"

#: keyboard.pm:332
#, c-format
msgid "Right Alt key"
msgstr ""

#: keyboard.pm:333
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""

#: keyboard.pm:334
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:335
#, c-format
msgid "CapsLock key"
msgstr ""

#: keyboard.pm:336
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr ""

#: keyboard.pm:337
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: keyboard.pm:338
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: keyboard.pm:339
#, c-format
msgid "\"Menu\" key"
msgstr ""

#: keyboard.pm:340
#, c-format
msgid "Left \"Windows\" key"
msgstr ""

#: keyboard.pm:341
#, c-format
msgid "Right \"Windows\" key"
msgstr ""

#: keyboard.pm:342
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""

#: keyboard.pm:343
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""

#: keyboard.pm:344
#, c-format
msgid "Left Shift key"
msgstr ""

#: keyboard.pm:345
#, c-format
msgid "Right Shift key"
msgstr ""

#: keyboard.pm:346
#, c-format
msgid "Left Alt key"
msgstr ""

#: keyboard.pm:347
#, fuzzy, c-format
msgid "Left Control key"
msgstr "원격 제어"

#: keyboard.pm:348
#, fuzzy, c-format
msgid "Right Control key"
msgstr "원격 제어"

#: keyboard.pm:384
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

#: keyboard.pm:389
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "안도라"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "아랍 에미리트 연합"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "아프가니스탄"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "안티가 바부다"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "앙귈라"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "알바니아"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "아르메니아"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "네델란드령 앤틸레스 열도"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "앙골라"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "남극"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "아르헨티나"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "미국령 사모아"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "아루바"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "아제르바이잔"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "보스니아 헤르체고비나"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "바르바도스"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "방글라데시"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "부르키나 파소"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "불가리아"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "바레인"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "부룬디"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "베닌"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "버뮤다"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "브루나이 다루살람"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "볼리비아"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "바하마"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "부탄"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "보우벳 섬"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "보츠와나"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "벨라루스"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "벨리즈"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "코코스 (킬링) 제도"

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "중앙 아프리카 공화국"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "코트 디브와르"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "쿡 제도"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "칠레"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "카메룬"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "중국"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "콜롬비아"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "세르비아 & 몬테네그로"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "쿠바"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "케이프 베르드"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "크리스마스 섬"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "사이프러스"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "지부티"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "도미니카"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "도미니카 공화국"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "알제리"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "에콰도르"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "이집트"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "서부 사하라"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "에리트리아"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "에티오피아"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "피지"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr ""

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "미크로네시아"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "패로 제도"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "가봉"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "영국"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "그레나다"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "조지아"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "프랑스령 기아나"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "가나"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "지브롤터"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "그린랜드"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "잠비아"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "기니"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Guadeloupe"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "적도 기니"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "과테말라"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "괌"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "기니비사우"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "구야나"

#: lang.pm:286
#, fuzzy, c-format
msgid "Hong Kong SAR (China)"
msgstr "홍콩"

#: lang.pm:287
#, fuzzy, c-format
msgid "Heard and McDonald Islands"
msgstr "북 마리아나 제도"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "혼두라스"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "크로아티아"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "하이티"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "인도네시아"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "인도"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "영국령 인도양 자치구역"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "이라크"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "이란"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "아이스랜드"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "자메이카"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "요르단"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "케냐"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "키르기즈스탄"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "캄보디아"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "키리바시"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "코모로스"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "북한"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "대한민국"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "쿠웨이트"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "케이만 제도"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "카자흐스탄"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "라오스"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "레바논"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "세인트 루시아"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "리히텐슈타인"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "스리랑카"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "라이베리아"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "레소토"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "리투아니아"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "룩셈부르크"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "라트비아"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "리비야"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "모로코"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "모나코"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "몰도바"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "마다가스카르"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "마샬 제도"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "마케도니아"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "말리"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "미얀마"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "몽골라"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "북 마리아나 제도"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "마르띠니크"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "모리타니아"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "몽세라트"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "마르타"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "모리셔스"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "몰디브"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "말라위"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "멕시코"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "말레이시아"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "모잠비크"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "나미비아"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "뉴 칼레도니아"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "니제르"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "노퍽 섬"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "나이지리아"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "니카라과"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "네팔"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "나우루"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "니우에"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "오만"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "파나마"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "페루"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "프랑스령 폴리네시아"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "파푸아뉴기니"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "필리핀"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "파키스탄"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr ""

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "피트케언"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "푸에르토리코"

#: lang.pm:369
#, fuzzy, c-format
msgid "Palestine"
msgstr "경로 선택"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "파라과이"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "팔라우"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "카타르"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "레위니옹"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "루마니아"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "르완다"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "사우디아라비아"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "솔로몬 제도"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "세이셸"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "수단"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "싱가포르"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr ""

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "슬로베니아"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr ""

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "시에라리온"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "산마리노"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "세네갈"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "소말리아"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "수리남"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "상투메 프린시페"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "엘 살바도르"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "시리아"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "스와질란드"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "터크스 카이코스 군도"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "챠드"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "프랑스령 남 자치구역"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "통고"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "타지키스탄"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "토켈로"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "동티모르"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "투르크멘"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "튀니지"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "통가"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "터키"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "트리니다드토바고"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "투발루"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "탄자니아"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "우크라이나"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "우간다"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "미국령 소군도"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "우루과이"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "우즈베키스탄"

#: lang.pm:419
#, fuzzy, c-format
msgid "Vatican"
msgstr "라트바아"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr ""

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "베네수엘라"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr ""

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr ""

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "베트남"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "바누아투"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "사모아"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "예멘"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "마요트"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "잠비아"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "짐바브웨"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "%s에 오신것을 환영합니다."

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr ""

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "논리 볼륨을 먼저 제거해 주세요.\n"

#: lvm.pm:178
#, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""

#: modules/interactive.pm:19
#, fuzzy, c-format
msgid "This driver has no configuration parameter!"
msgstr "OKI 윈프린터 설정"

#: modules/interactive.pm:22
#, fuzzy, c-format
msgid "Module configuration"
msgstr "수동 설정"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr ""

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "%s 인터페이스가 감지되었습니다."

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "또 다른것이 설치되어 있습니까?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "또 다른 %s 인터페이스가 설치되어 있습니까?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "하드웨어 정보 보기"

#: modules/interactive.pm:82
#, fuzzy, c-format
msgid "Installing driver for USB controller"
msgstr "%s카드 드라이버 %s 설치중"

#: modules/interactive.pm:83
#, fuzzy, c-format
msgid "Installing driver for firewire controller %s"
msgstr "%s카드 드라이버 %s 설치중"

#: modules/interactive.pm:84
#, fuzzy, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "%s카드 드라이버 %s 설치중"

#: modules/interactive.pm:85
#, fuzzy, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "%s카드 드라이버 %s 설치중"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "%s카드 드라이버 %s 설치중"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(%s 모듈 사용)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"이제 %s 드라이버에 옵션을 지정할 수 있습니다.\n"
"옵션은 ``이름=값 이름2=값2 ...''형식으로 지정합니다..\n"
"가령, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "모듈 옵션들:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "어떤 %s 드라이버를 시도해 봅니까?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"일반적으로 %s 드라이버는 추가 정보 없이도 잘 작동하지만, 어떤 경우에는 \n"
"추가 정보를 필요로 하기도 합니다. 추가 옵션을 지정하시겠습니까, 아니면 \n"
"필요한 정보를 자동검색하게 하겠습니까?\n"
"자동검색은 어쩌다가 컴퓨터를 멈추게 할 수도 있습니다.하지만,\n"
"장치를 훼손하지는 않습니다."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "자동검색"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "옵션 지정"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"%s 모듈을 읽어들이는데 실패했습니다.\n"
"다른 값으로 다시 시도해 보시겠습니까?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "번호"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr ""

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "쉼표 분리 문자열들"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - 마우스"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "표준"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "로지텍 마우스맨/퍼스트마우스 (시리얼)"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "일반적인 PS2 휠 마우스"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "ALPS 글라이드포인트"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
#: network/netconnect.pm:614 network/netconnect.pm:619
#: network/netconnect.pm:635 network/netconnect.pm:637
#, c-format
msgid "Automatic"
msgstr "자동"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "켄싱턴 씽킹 마우스"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "지니어스 넷마우스"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "지니어스 넷스크롤"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "마이크로소프트 익스플로러"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 버튼"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "일반적인 2버튼 마우스"

#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "일반적인 3버튼 마우스"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "휠 마우스"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "시리얼 마우스"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "일반적인 3버튼 마우스"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "마이크로소프트 인텔리마우스"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "로지텍 마우스맨"

#: mouse.pm:62
#, fuzzy, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "로지텍 마우스맨"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "마우스 시스템"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "로지텍 CC 시리즈"

#: mouse.pm:66
#, fuzzy, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "로지텍 CC 시리즈"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "로지텍 마우스맨+/퍼스트마우스+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM 시리즈"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM 히트타블렛"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "로지텍 마우스 (시리얼, 오래된 C7 형태)"

#: mouse.pm:72
#, fuzzy, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "로지텍 마우스 (시리얼, 오래된 C7 형태)"

#: mouse.pm:74
#, fuzzy, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "켄싱턴 씽킹 마우스"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "버스마우스"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 버튼"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 버튼"

#: mouse.pm:82
#, fuzzy, c-format
msgid "3 buttons with Wheel emulation"
msgstr "버튼 에뮬레이션"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "세계 공용"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "마이크로소프트 익스플로러"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "없음"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "마우스 없음"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr ""

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "마우스를 테스트하세요."

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "마우스를 활성화하려면"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "마우스휠을 움직여 보세요."

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "웹 서버"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "도메인 네임 서버"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "SSH 서비스"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "FTP 서버"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "메일 서버"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP and IMAP 서버"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X 서버"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr ""

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "DNS 서버"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr ""

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr ""

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""
"드레이크 방화벽 관리자\n"
"\n"
"이것은 맨드리바 리눅스 시스템의 개인 방화벽을 설정합니다.\n"
"강력한 전문 방화벽을 사용하고 싶다면, 맨드리바 보안 방화벽\n"
"배포판을 구하시기 바랍니다."

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr ""

#: network/drakfirewall.pm:209
#, c-format
msgid "Other ports"
msgstr "기타 포트"

#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:381 standalone/net_applet:418
#, fuzzy, c-format
msgid "Interactive Firewall"
msgstr "방화벽"

#: network/drakfirewall.pm:252
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""

#: network/drakfirewall.pm:257
#, c-format
msgid "Use Interactive Firewall"
msgstr ""

#: network/ifw.pm:136
#, fuzzy, c-format
msgid "Port scanning"
msgstr "비공유"

#: network/ifw.pm:137
#, fuzzy, c-format
msgid "Service attack"
msgstr "서비스 종류(_T):"

#: network/ifw.pm:138
#, fuzzy, c-format
msgid "Password cracking"
msgstr "암호 (확인)"

#: network/ifw.pm:139
#, c-format
msgid "\"%s\" attack"
msgstr ""

#: network/ifw.pm:141
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr ""

#: network/ifw.pm:142
#, fuzzy, c-format
msgid "The %s service has been attacked by %s."
msgstr "이 행사는 바뀌었습니다."

#: network/ifw.pm:143
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr ""

#: network/ifw.pm:144
#, fuzzy, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr "이 행사는 바뀌었습니다."

#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
#: network/netconnect.pm:561 network/netconnect.pm:704
#: network/netconnect.pm:708
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "I do not know"
msgstr "모르겠음"

#: network/isdn.pm:161 network/netconnect.pm:396
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:396
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:602 network/netconnect.pm:619
#: network/netconnect.pm:635
#, c-format
msgid "Manual"
msgstr "수동"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr ""

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr ""

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr ""

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr ""

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr ""

#: network/netconnect.pm:69 network/netconnect.pm:494
#: network/netconnect.pm:506
#, fuzzy, c-format
msgid "Manual choice"
msgstr "미얀마"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "내장 ISDN 카드"

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "수동 설정"

#: network/netconnect.pm:81 standalone/drakroam:121
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "IP 자동할당"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "다른 지역을 위한 프로토콜"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "유럽 프로토콜 (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"다른 지역을 위한 프로토콜\n"
" D채널 (leased lines) 아님"

#: network/netconnect.pm:103 standalone/harddrake2:309
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "알 수 없음"

#: network/netconnect.pm:120 network/thirdparty.pm:219
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "알카텔 스피드터치 USB"

#: network/netconnect.pm:121
#, fuzzy, c-format
msgid "Sagem USB modem"
msgstr "시스템 모드"

#: network/netconnect.pm:122
#, c-format
msgid "Bewan modem"
msgstr ""

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:127
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:128
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "수동 설정"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:136
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "이더넷 카드"

#: network/netconnect.pm:137
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "이더넷 카드"

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr ""

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr ""

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "스크립트 기반"

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "터미날 기반"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:251 standalone/drakconnect:56
#, fuzzy, c-format
msgid "Network & Internet Configuration"
msgstr "네트웍 환경 설정"

#: network/netconnect.pm:257
#, c-format
msgid "LAN connection"
msgstr "LAN 연결"

#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, c-format
msgid "Wireless connection"
msgstr "무선 연결"

#: network/netconnect.pm:259
#, c-format
msgid "ADSL connection"
msgstr "ADSL 연결"

#: network/netconnect.pm:260
#, c-format
msgid "Cable connection"
msgstr "캐이블 연결"

#: network/netconnect.pm:261
#, c-format
msgid "ISDN connection"
msgstr "ISDN 연결"

#: network/netconnect.pm:262
#, c-format
msgid "Modem connection"
msgstr "모뎀 연결"

#: network/netconnect.pm:263
#, c-format
msgid "DVB connection"
msgstr ""

#: network/netconnect.pm:273
#, c-format
msgid "Choose the connection you want to configure"
msgstr "설정할 연결을 선택하세요."

#: network/netconnect.pm:288 network/netconnect.pm:782
#, c-format
msgid "Connection Configuration"
msgstr "연결 설정"

#: network/netconnect.pm:288 network/netconnect.pm:783
#, c-format
msgid "Please fill or check the field below"
msgstr "아래 양식을 채워 주세요."

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "님의 개인 전화 번호"

#: network/netconnect.pm:292 network/netconnect.pm:786
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "공급자 이름 (예 provider.net)"

#: network/netconnect.pm:293 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "공급자 전화번호"

#: network/netconnect.pm:294
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "공급자 DNS 1 (옵션)"

#: network/netconnect.pm:295
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "공급자 DNS 2 (옵션)"

#: network/netconnect.pm:296 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "다이얼링 모드"

#: network/netconnect.pm:297 standalone/drakconnect:449
#: standalone/drakconnect:517
#, c-format
msgid "Connection speed"
msgstr "연결 속도"

#: network/netconnect.pm:298 standalone/drakconnect:454
#, c-format
msgid "Connection timeout (in sec)"
msgstr "연결 시간초과 (초)"

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:789 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "로그인 계정(사용자명)"

#: network/netconnect.pm:300 network/netconnect.pm:325
#: network/netconnect.pm:790 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "계정 암호"

#: network/netconnect.pm:301 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "카드 IRQ"

#: network/netconnect.pm:302 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "카드 메모리 (DMA)"

#: network/netconnect.pm:303 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "카드 IO"

#: network/netconnect.pm:304 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "카드 IO_0"

#: network/netconnect.pm:305
#, c-format
msgid "Card IO_1"
msgstr "카드 IO_1"

#: network/netconnect.pm:320
#, fuzzy, c-format
msgid "Cable: account options"
msgstr "다이얼업 옵션"

#: network/netconnect.pm:323
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:349 network/netconnect.pm:671
#: network/netconnect.pm:822 network/netconnect.pm:1162
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "네트웍 인터페이스를 선택하세요."

#: network/netconnect.pm:351 network/netconnect.pm:386
#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
#: standalone/drakconnect:713
#, fuzzy, c-format
msgid "Net Device"
msgstr "Xinetd 서비스"

#: network/netconnect.pm:352 network/netconnect.pm:357
#, c-format
msgid "External ISDN modem"
msgstr "외장 ISDN 모뎀"

#: network/netconnect.pm:385 standalone/harddrake2:216
#, fuzzy, c-format
msgid "Select a device!"
msgstr "스캐너 선택"

#: network/netconnect.pm:394 network/netconnect.pm:404
#: network/netconnect.pm:414 network/netconnect.pm:447
#: network/netconnect.pm:461
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN 설정"

#: network/netconnect.pm:395
#, c-format
msgid "What kind of card do you have?"
msgstr "어떤 종유의 카드를 가지고 있습니까?"

#: network/netconnect.pm:405
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"만약 ISA 카드를 가지고 있다면, 다음 화면에서 설정값이 정확해야 합니다.\n"
"\n"
"만약 PCMCIA 카드를 가지고 있다면, IRQ와 IO 값을 알고 있어야 합니다.\n"

#: network/netconnect.pm:409
#, c-format
msgid "Continue"
msgstr "계속"

#: network/netconnect.pm:409
#, c-format
msgid "Abort"
msgstr "중지"

#: network/netconnect.pm:415
#, fuzzy, c-format
msgid "Which of the following is your ISDN card?"
msgstr "어느 것이 님의 ISDN 카드입니까?"

#: network/netconnect.pm:433
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""

#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "드라이버"

#: network/netconnect.pm:447
#, c-format
msgid "Which protocol do you want to use?"
msgstr "어떤 프로토콜을 사용하시겠습니까?"

#: network/netconnect.pm:449 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "프로토콜"

#: network/netconnect.pm:461
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"공급자를 선택하세요.\n"
"목록에 없으면, 「목록에 없음」을 선택하세요."

#: network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:703
#, fuzzy, c-format
msgid "Provider:"
msgstr "프로파일: "

#: network/netconnect.pm:472
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: network/netconnect.pm:491
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "네트웍 인터페이스를 선택하세요."

#: network/netconnect.pm:526
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?"

#: network/netconnect.pm:555
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "프린터 스풀러을 선택하세요."

#: network/netconnect.pm:579
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "다이얼업 옵션"

#: network/netconnect.pm:582
#, c-format
msgid "Connection name"
msgstr "연결 이름"

#: network/netconnect.pm:583
#, c-format
msgid "Phone number"
msgstr "전화 번호"

#: network/netconnect.pm:584
#, c-format
msgid "Login ID"
msgstr "로그인 ID"

#: network/netconnect.pm:599 network/netconnect.pm:632
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "인자"

#: network/netconnect.pm:602
#, fuzzy, c-format
msgid "IP parameters"
msgstr "인자"

#: network/netconnect.pm:603 network/netconnect.pm:933
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "IP 주소"

#: network/netconnect.pm:604
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "넷마스크"

#: network/netconnect.pm:616
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:619
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:620
#, c-format
msgid "Domain name"
msgstr "도메인 이름"

#: network/netconnect.pm:621 network/netconnect.pm:787
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr "첫번째 DNS 서버 (옵션)"

#: network/netconnect.pm:622 network/netconnect.pm:788
#: standalone/drakconnect:993
#, c-format
msgid "Second DNS Server (optional)"
msgstr "두번째 DNS 서버 (옵션)"

#: network/netconnect.pm:623
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "프린터 호스트명 또는 IP"

#: network/netconnect.pm:635 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "게이트웨이"

#: network/netconnect.pm:636 standalone/drakroam:124
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "IP 주소"

#: network/netconnect.pm:671
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "LAN 설정"

#: network/netconnect.pm:701
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "어떤 종류의 마우스를 사용하십니까?"

#: network/netconnect.pm:731
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""

#: network/netconnect.pm:734
#, fuzzy, c-format
msgid "ADSL connection type:"
msgstr "ADSL 연결"

#: network/netconnect.pm:792
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:793
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:796
#, fuzzy, c-format
msgid "Encapsulation:"
msgstr "암호화 키"

#: network/netconnect.pm:826
#, c-format
msgid "Manually load a driver"
msgstr ""

#: network/netconnect.pm:827
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr ""

#: network/netconnect.pm:888
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "호스트명:"

#: network/netconnect.pm:889 network/netconnect.pm:920
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "%s 네트웍 카드 설정중"

#: network/netconnect.pm:890
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""

#: network/netconnect.pm:921
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"이 시스템을 위한 IP 설정을 입력해 주세요.\n"
"각각의 항목은「.」으로 구분된 십진수 IP 주소로 입력해야 합니다.\n"
"(예, 1.2.3.4)"

#: network/netconnect.pm:928 standalone/drakconnect:373
#, fuzzy, c-format
msgid "Assign host name from DHCP address"
msgstr "호스트 이름 또는 IP를 입력하세요."

#: network/netconnect.pm:929 standalone/drakconnect:375
#, fuzzy, c-format
msgid "DHCP host name"
msgstr "호스트명:"

#: network/netconnect.pm:934 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "넷마스크"

#: network/netconnect.pm:936 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "네트웍카드 ID 추적 (랩탑에 유용함)"

#: network/netconnect.pm:937 standalone/drakconnect:438
#, fuzzy, c-format
msgid "Network Hotplugging"
msgstr "네트웍 환경 설정"

#: network/netconnect.pm:939 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr "부팅시 시작"

#: network/netconnect.pm:941 standalone/drakconnect:460
#, fuzzy, c-format
msgid "Metric"
msgstr "제한"

#: network/netconnect.pm:942
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr ""

#: network/netconnect.pm:944 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr "DHCP 클라이언트"

#: network/netconnect.pm:946 standalone/drakconnect:379
#, fuzzy, c-format
msgid "DHCP timeout (in seconds)"
msgstr "연결 시간초과 (초)"

#: network/netconnect.pm:947 standalone/drakconnect:382
#, fuzzy, c-format
msgid "Get DNS servers from DHCP"
msgstr "DHCP 서버 IP"

#: network/netconnect.pm:948 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr ""

#: network/netconnect.pm:949 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr ""

#: network/netconnect.pm:957 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다."

#: network/netconnect.pm:961 standalone/drakconnect:680
#, fuzzy, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다."

#: network/netconnect.pm:965
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr ""

#: network/netconnect.pm:970 standalone/drakTermServ:1856
#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
#, c-format
msgid "%s already in use\n"
msgstr ""

#: network/netconnect.pm:1010
#, fuzzy, c-format
msgid "Choose an ndiswrapper driver"
msgstr "X 서버 선택"

#: network/netconnect.pm:1012
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr ""

#: network/netconnect.pm:1012
#, fuzzy, c-format
msgid "Install a new driver"
msgstr "시스템 설치"

#: network/netconnect.pm:1024
#, c-format
msgid "Select a device:"
msgstr ""

#: network/netconnect.pm:1053
#, fuzzy, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "호스트 이름 또는 IP를 입력하세요."

#: network/netconnect.pm:1056 standalone/drakconnect:404
#: standalone/drakroam:52
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "전문가 모드"

#: network/netconnect.pm:1057
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:1057
#, fuzzy, c-format
msgid "Managed"
msgstr "언어 선택"

#: network/netconnect.pm:1057
#, c-format
msgid "Master"
msgstr "마스터"

#: network/netconnect.pm:1057
#, fuzzy, c-format
msgid "Repeater"
msgstr "복구"

#: network/netconnect.pm:1057
#, c-format
msgid "Secondary"
msgstr "두번째"

#: network/netconnect.pm:1057
#, c-format
msgid "Auto"
msgstr "자동"

#: network/netconnect.pm:1060 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:1061 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr ""

#: network/netconnect.pm:1066
#, c-format
msgid "Allow access point roaming"
msgstr ""

#: network/netconnect.pm:1068 standalone/drakconnect:406
#, fuzzy, c-format
msgid "Network ID"
msgstr "네트웍"

#: network/netconnect.pm:1069 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:1070 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1071 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:1072 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1073
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1080 standalone/drakconnect:421
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "게임 스테이션"

#: network/netconnect.pm:1081 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1082
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1089 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1090
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1099 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1100
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1115
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1119
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1162
#, c-format
msgid "DVB configuration"
msgstr ""

#: network/netconnect.pm:1163
#, c-format
msgid "DVB Adapter"
msgstr ""

#: network/netconnect.pm:1180
#, c-format
msgid "DVB adapter settings"
msgstr ""

#: network/netconnect.pm:1183
#, c-format
msgid "Adapter card"
msgstr ""

#: network/netconnect.pm:1184
#, c-format
msgid "Net demux"
msgstr ""

#: network/netconnect.pm:1185
#, c-format
msgid "PID"
msgstr "프로세서 ID"

#: network/netconnect.pm:1213
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"호스트 이름을 입력해 주세요.\n"
"호스트 이름은 ``mybox.mylab.myco.com''과 같이 완전한 호스트 \n"
"이름이어야 합니다. \n"
"게이트 웨이가 있다면 그 IP 주소도 입력해야 합니다."

#: network/netconnect.pm:1218
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1220 standalone/drakconnect:991
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "첫번째 DNS 서버 (옵션)"

#: network/netconnect.pm:1220 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "호스트명:"

#: network/netconnect.pm:1222
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "DNS 서버"

#: network/netconnect.pm:1223
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "DNS 서버"

#: network/netconnect.pm:1224
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "DNS 서버"

#: network/netconnect.pm:1225
#, fuzzy, c-format
msgid "Search domain"
msgstr "NIS 도메인"

#: network/netconnect.pm:1226
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1227
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "rpdlxmdnpdl (예. %s)"

#: network/netconnect.pm:1229
#, c-format
msgid "Gateway device"
msgstr "게이트웨이 장치"

#: network/netconnect.pm:1238
#, fuzzy, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다."

#: network/netconnect.pm:1243 standalone/drakconnect:685
#, fuzzy, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "IP 주소는 1.2.3.4과 같은 형식이어야 합니다."

#: network/netconnect.pm:1256
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1260
#, fuzzy, c-format
msgid "Zeroconf Host name"
msgstr "호스트명:"

#: network/netconnect.pm:1263
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1273
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "부팅시에 연결하도록 하겠습니까?"

#: network/netconnect.pm:1286
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "부팅시에 연결하도록 하겠습니까?"

#: network/netconnect.pm:1302
#, fuzzy, c-format
msgid "Automatically at boot"
msgstr "부팅시 시작"

#: network/netconnect.pm:1304
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1306
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1315
#, fuzzy, c-format
msgid "How do you want to dial this connection?"
msgstr "부팅시에 연결하도록 하겠습니까?"

#: network/netconnect.pm:1328
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "지금 인터넷 연결을 시도해 보시겠습니까?"

#: network/netconnect.pm:1336 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr "연결 테스트 중..."

#: network/netconnect.pm:1361
#, fuzzy, c-format
msgid "The system is now connected to the Internet."
msgstr "지금 시스템이 인터넷에 연결되었습니다."

#: network/netconnect.pm:1362
#, fuzzy, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "보안상의 이유로 이제 연결을 끊을 것입니다."

#: network/netconnect.pm:1363
#, fuzzy, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"시스템이 인터넷에 연결되지 않은 듯합니다.\n"
"연결 설정을 다시해 보세요."

#: network/netconnect.pm:1378
#, fuzzy, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"축하합니다. 네트웍/인터넷 설정이 완료되었습니다.\n"
"\n"
"이제 설정이 시스템에 적용될 것입니다.\n"

#: network/netconnect.pm:1381
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"완료된 후에, X를 다시 시작하여 호스트명 변경에 따른\n"
"문제 발생을 피하시기 바랍니다."

#: network/netconnect.pm:1382
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1393
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "%s 포트에서 발견"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1395
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "%s 발견"

#: network/netconnect.pm:1395
#, fuzzy, c-format
msgid "(detected)"
msgstr "%s 발견"

#: network/netconnect.pm:1396
#, c-format
msgid "Network Configuration"
msgstr "네트웍 환경 설정"

#: network/netconnect.pm:1397
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"지금 네트웍을 사용하여 설치하고 있는 중이므로, 네트웍 설정은 이미 되어 있습니"
"다.\n"
"「확인」을 눌러 현재 설정을 유지하거나, 「취소」를 눌러 인터넷/네트웍 연결을 "
"다시 설정하세요.\n"

#: network/netconnect.pm:1400
#, fuzzy, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?"

#: network/netconnect.pm:1401
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"네트웍을 다시 시작하는 도중에 문제가 발생했습니다:\n"
"\n"
"%s"

#: network/netconnect.pm:1402
#, fuzzy, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"\n"
"\n"
"\n"
"이제 「%s」연결을 설정할 것입니다.\n"
"\n"
"\n"
"시작하려면 「확인」을 누르세요."

#: network/netconnect.pm:1403
#, fuzzy, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "어느 Xorg 설정을 선택하시겠습니까?"

#: network/netconnect.pm:1404
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"인터넷 접속방식을 여러개 설정했습니다.\n"
"연결에 사용할 방식을 선택하세요.\n"
"\n"

#: network/netconnect.pm:1405
#, c-format
msgid "Internet connection"
msgstr "인터넷 연결"

#: network/netconnect.pm:1422
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""

#: network/network.pm:408
#, c-format
msgid "Proxies configuration"
msgstr "프락시 설정"

#: network/network.pm:409
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080"
msgstr ""

#: network/network.pm:410
#, c-format
msgid "HTTP proxy"
msgstr "웹 프락시"

#: network/network.pm:411
#, c-format
msgid "FTP proxy"
msgstr "FTP 프락시"

#: network/network.pm:414
#, c-format
msgid "Proxy should be http://..."
msgstr "프락시 이름은 httP://... 이어야 합니다."

#: network/network.pm:415
#, fuzzy, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "주소는 「http:」로 시작해야 합니다."

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/thirdparty.pm:231
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr ""

#: network/thirdparty.pm:240
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/thirdparty.pm:319
#, fuzzy, c-format
msgid "Could not install the packages (%s)!"
msgstr "%s 팩키지 설치중"

#: network/thirdparty.pm:327
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr ""

#: network/thirdparty.pm:328
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""

#: network/thirdparty.pm:330
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""

#: network/thirdparty.pm:370
#, fuzzy, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "시스템 폰트 제거"

#: network/thirdparty.pm:372
#, c-format
msgid "No Windows system has been detected!"
msgstr ""

#: network/thirdparty.pm:382
#, fuzzy, c-format
msgid "Insert floppy"
msgstr "%s에 프로피를 넣으세요."

#: network/thirdparty.pm:383
#, fuzzy, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr "플로피 디스크를 %s 드라이브에 넣으세요"

#: network/thirdparty.pm:393
#, fuzzy, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "장치 %s를 어디에 마운트 하시겠습니까?"

#: network/thirdparty.pm:403
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/thirdparty.pm:407 network/thirdparty.pm:409
#, fuzzy, c-format
msgid "Use a floppy"
msgstr "플로피에 저장"

#: network/thirdparty.pm:407
#, fuzzy, c-format
msgid "Use my Windows partition"
msgstr "윈도우즈 파일 시스템의 범위 계산중"

#: network/thirdparty.pm:417
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/thirdparty.pm:422 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "축하합니다!"

#: network/thirdparty.pm:422
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/thirdparty.pm:490
#, c-format
msgid "Looking for required software and drivers..."
msgstr ""

#: network/thirdparty.pm:495
#, fuzzy, c-format
msgid "Please wait, running device configuration commands..."
msgstr "희망하는 보안 단계를 선택해 주세요."

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr ""

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr ""

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr ""

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "마운트 실패: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "이 시스템에서는 확장파티션이 지원되지 않습니다."

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"파티션 테이블에서 빈 공간이 있지만 사용할 수 없습니다.\n"
"유일한 해결책은 주 파티션들이 확장 파티션들의 뒤에 있는 빈 공간을 차지하도록 "
"옴기는 것입니다."

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "%s 파일로부터의 복구 실패: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "잘못된 백업 파일"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "%s 파일에 쓰기 오류"

#: partition_table/raw.pm:253
#, fuzzy, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"하드드스크에 이상이 발생했습니다. \n"
"데이터 무결성 검사가 실패했습니다. \n"
"이것은 디스크에 기록되는 데이터를 잃어 버린다는 것을 의미합니다."

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "필수 팩키지"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "중요한 팩키지"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "훌륭한 팩키지"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "좋은 팩키지"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "괜찮은 팩키지"

#: pkgs.pm:473
#, fuzzy, c-format
msgid "Downloading file %s..."
msgstr "파일 전송 중 ..."

#: printer/cups.pm:105
#, c-format
msgid "(on %s)"
msgstr "(%s에)"

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr "(이 서버상의)"

#: printer/cups.pm:117 standalone/printerdrake:200
#, fuzzy, c-format
msgid "Configured on other machines"
msgstr "연결 설정"

#: printer/cups.pm:119
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "CUPS 서버 IP"

#: printer/cups.pm:119 printer/printerdrake.pm:4887
#: printer/printerdrake.pm:4897 printer/printerdrake.pm:5056
#: printer/printerdrake.pm:5067 printer/printerdrake.pm:5281
#, c-format
msgid " (Default)"
msgstr " (기본값)"

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:158
#, fuzzy, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Common Unix Printing System"

#: printer/data.pm:159
#, fuzzy, c-format
msgid "Remote CUPS"
msgstr "원격 CUPS 서버"

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:690
#: printer/main.pm:1808 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
#: printer/printerdrake.pm:3981
#, c-format
msgid "Unknown model"
msgstr "알 수없는 모델"

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr "로컬 프린터"

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "원격 프린터"

#: printer/main.pm:26
#, c-format
msgid "Printer on remote CUPS server"
msgstr "원격 CUPS 서버의 프린터"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, c-format
msgid "Printer on remote lpd server"
msgstr "원격 LPD 서버의 프린터"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "네트웍 프린터 (TCP/소켓)"

#: printer/main.pm:29
#, fuzzy, c-format
msgid "Printer on SMB/Windows server"
msgstr "삼바/윈도우즈 95/98/NT상의 프린터"

#: printer/main.pm:30
#, c-format
msgid "Printer on NetWare server"
msgstr "네트웨어 서버상의 프린터"

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, c-format
msgid "Enter a printer device URI"
msgstr "프린터 장치 URI을 입력하세요."

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr "작업을 명령으로 파이프 연결"

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr "권장"

#: printer/main.pm:355 standalone/printerdrake:199
#, fuzzy, c-format
msgid "Configured on this machine"
msgstr "(이 서버상의)"

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr ""

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, c-format
msgid ", USB printer #%s"
msgstr ""

#: printer/main.pm:366
#, fuzzy, c-format
msgid ", USB printer"
msgstr "프린터 없음"

#: printer/main.pm:370
#, fuzzy, c-format
msgid ", HP printer on a parallel port"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:372
#, fuzzy, c-format
msgid ", HP printer on USB"
msgstr "프린터 없음"

#: printer/main.pm:374
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ""

#: printer/main.pm:376
#, fuzzy, c-format
msgid ", HP printer"
msgstr "프린터 없음"

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ""

#: printer/main.pm:385
#, fuzzy, c-format
msgid ", multi-function device on a parallel port"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ""

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ""

#: printer/main.pm:395
#, c-format
msgid ", printing to %s"
msgstr ", %s에 인쇄"

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ""

#: printer/main.pm:429
#, fuzzy, c-format
msgid "Parallel port #%s"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, fuzzy, c-format
msgid "USB printer #%s"
msgstr "프린터 없음"

#: printer/main.pm:434
#, fuzzy, c-format
msgid "USB printer"
msgstr "프린터 없음"

#: printer/main.pm:438
#, fuzzy, c-format
msgid "HP printer on a parallel port"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:440
#, fuzzy, c-format
msgid "HP printer on USB"
msgstr "프린터를 찾을 수 없습니다!"

#: printer/main.pm:442
#, fuzzy, c-format
msgid "HP printer on HP JetDirect"
msgstr "프린터 아이콘 보기"

#: printer/main.pm:444
#, fuzzy, c-format
msgid "HP printer"
msgstr "프린터"

#: printer/main.pm:450
#, fuzzy, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:453
#, fuzzy, c-format
msgid "Multi-function device on a parallel port"
msgstr "프린터 호스트명 또는 IP"

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr ""

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr ""

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr ""

#: printer/main.pm:463
#, fuzzy, c-format
msgid "Prints into %s"
msgstr ", %s에 인쇄"

#: printer/main.pm:466
#, fuzzy, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr ""

#: printer/main.pm:474
#, fuzzy, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "삼바/윈도우즈 95/98/NT상의 프린터"

#: printer/main.pm:479
#, fuzzy, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "네트웍 프린터 (소켓)"

#: printer/main.pm:482
#, fuzzy, c-format
msgid "Uses command %s"
msgstr "포트"

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr ""

#: printer/main.pm:687 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3119
#, c-format
msgid "Raw printer (No driver)"
msgstr "날(RAW) 프린터 (드라이버 사용안함)"

#: printer/main.pm:1307 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, fuzzy, c-format
msgid "Local network(s)"
msgstr "C 클래스 지역 네트웍"

#: printer/main.pm:1309 printer/printerdrake.pm:227
#, fuzzy, c-format
msgid "Interface \"%s\""
msgstr "인터페이스 %s"

#: printer/main.pm:1311
#, fuzzy, c-format
msgid "Network %s"
msgstr "네트웍"

#: printer/main.pm:1313
#, fuzzy, c-format
msgid "Host %s"
msgstr "호스트명:"

#: printer/main.pm:1342
#, fuzzy, c-format
msgid "%s (Port %s)"
msgstr "포트"

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""

#: printer/printerdrake.pm:67
#, fuzzy, c-format
msgid "CUPS printer configuration"
msgstr "OKI 윈프린터 설정"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr ""

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr ""

#: printer/printerdrake.pm:82
#, fuzzy, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "파일 공유"

#: printer/printerdrake.pm:84
#, fuzzy, c-format
msgid "Custom configuration"
msgstr "경고 설정"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, fuzzy, c-format
msgid "No remote machines"
msgstr "(이 서버상의)"

#: printer/printerdrake.pm:100
#, fuzzy, c-format
msgid "Additional CUPS servers: "
msgstr "CUPS 서버 IP"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:115
#, fuzzy, c-format
msgid "Japanese text printing mode"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:123
#, fuzzy, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "자동 CUPS 설정"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4520
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "On"

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "끄기"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, fuzzy, c-format
msgid "Sharing of local printers"
msgstr "유효한 프린터들"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr ""

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr ""

#: printer/printerdrake.pm:188
#, fuzzy, c-format
msgid "Remove selected host/network"
msgstr "선택 항목 제거"

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr ""

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr ""

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr ""

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr ""

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, fuzzy, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "원격 CUPS 서버의 프린터"

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""

#: printer/printerdrake.pm:358
#, fuzzy, c-format
msgid "Add server"
msgstr "사용자 추가"

#: printer/printerdrake.pm:364
#, fuzzy, c-format
msgid "Edit selected server"
msgstr "%s 발견"

#: printer/printerdrake.pm:373
#, fuzzy, c-format
msgid "Remove selected server"
msgstr "선택 항목 제거"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr ""

#: printer/printerdrake.pm:422
#, fuzzy, c-format
msgid "Server IP missing!"
msgstr "NCP 서버 이름을 찾을 수 없음!"

#: printer/printerdrake.pm:428
#, fuzzy, c-format
msgid "The entered IP is not correct.\n"
msgstr "모델이 정확합니다."

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr "포트 번호는 정수이어야 합니다!"

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "포트"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, fuzzy, c-format
msgid "On, Name or IP of remote server:"
msgstr "원격 LPD 서버의 프린터"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4529
#: printer/printerdrake.pm:4595
#, fuzzy, c-format
msgid "CUPS server name or IP address missing."
msgstr "NCP 서버 이름을 찾을 수 없음!"

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
#: printer/printerdrake.pm:4320 printer/printerdrake.pm:4415
#: printer/printerdrake.pm:4421 printer/printerdrake.pm:4449
#: printer/printerdrake.pm:4556 printer/printerdrake.pm:4665
#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4694
#: printer/printerdrake.pm:4709 printer/printerdrake.pm:4910
#: printer/printerdrake.pm:5385 printer/printerdrake.pm:5468
#: standalone/printerdrake:75 standalone/printerdrake:590
#, c-format
msgid "Printerdrake"
msgstr "프린터드레이크"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
#: printer/printerdrake.pm:4666
#, c-format
msgid "Reading printer data..."
msgstr "프린터 데이터 읽는 중 ..."

#: printer/printerdrake.pm:587
#, fuzzy, c-format
msgid "Restarting CUPS..."
msgstr "XFS 재시작"

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""

#: printer/printerdrake.pm:622
#, fuzzy, c-format
msgid "Printer auto administration"
msgstr "프린터 자동 검색"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""

#: printer/printerdrake.pm:626
#, fuzzy, c-format
msgid "Do automatic configuration of new printers"
msgstr "원격 프린터 설정"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, fuzzy, c-format
msgid "when a USB printer is connected and turned on"
msgstr "프린터가 연결된 포트를 선택하세요."

#: printer/printerdrake.pm:630
#, fuzzy, c-format
msgid "when Printerdrake is started"
msgstr "이 파티션은 크기변경이 허용되지 않습니다."

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr ""

#: printer/printerdrake.pm:640
#, fuzzy, c-format
msgid "Re-enable disabled printers"
msgstr "유효한 프린터들"

#: printer/printerdrake.pm:644
#, fuzzy, c-format
msgid "when the printing system is started"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:680
#, fuzzy, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""

#: printer/printerdrake.pm:686
#, fuzzy, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr "포트 번호는 정수이어야 합니다!"

#: printer/printerdrake.pm:690
#, fuzzy, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr "오프셋은 0보다 큰 정수값이어야 합니다!"

#: printer/printerdrake.pm:701
#, fuzzy, c-format
msgid "Do not disable the printer"
msgstr "서버 사용 해제"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr ""

#: printer/printerdrake.pm:707
#, fuzzy, c-format
msgid "Number of retries"
msgstr "버튼 수"

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr ""

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr "프린터 연결방법을 선택하세요."

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr "프린터가 어떻게 연결되어 있습니까?"

#: printer/printerdrake.pm:748
#, fuzzy, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"원격 CUPS 서버의 프린터는 여기서 설정할 필요가 \n"
"없습니다; 이런 프린터는 자동으로 감지되어 집니다. 이와 같은 경우\n"
"「원격 CUPS 서버의 프린터」를 선택하세요."

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4912
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr ""

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:772
#, fuzzy, c-format
msgid "The timeout must be a positive integer number!"
msgstr "오프셋은 0보다 큰 정수값이어야 합니다!"

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr "시스템 검사 중..."

#: printer/printerdrake.pm:829
#, fuzzy, c-format
msgid "and one unknown printer"
msgstr "새 프린터 추가"

#: printer/printerdrake.pm:831
#, fuzzy, c-format
msgid "and %d unknown printers"
msgstr "새 프린터 추가"

#: printer/printerdrake.pm:835
#, fuzzy, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "시스템 폰트 복사"

#: printer/printerdrake.pm:837
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr "시스템 폰트 복사"

#: printer/printerdrake.pm:838
#, fuzzy, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr "시스템 폰트 복사"

#: printer/printerdrake.pm:842
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:843
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: printer/printerdrake.pm:846
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#: printer/printerdrake.pm:849
#, fuzzy, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "프린터가 연결된 포트를 선택하세요."

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: printer/printerdrake.pm:863
#, fuzzy, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""
"이 프린터(%s)를\n"
"기본 프린터로 하시겠습니까?"

#: printer/printerdrake.pm:865
#, fuzzy, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "부팅시에 연결하도록 하겠습니까?"

#: printer/printerdrake.pm:866
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: printer/printerdrake.pm:884
#, c-format
msgid "Do not setup printer automatically now, and never do it again"
msgstr ""

#: printer/printerdrake.pm:928
#, fuzzy, c-format
msgid "Searching for new printers..."
msgstr "유효한 프린터들"

#: printer/printerdrake.pm:976
#, c-format
msgid "Do not setup printer automatically again"
msgstr ""

#: printer/printerdrake.pm:983
#, fuzzy, c-format
msgid "New printers found"
msgstr "프린터를 찾을 수 없습니다!"

#: printer/printerdrake.pm:984
#, fuzzy, c-format
msgid "New printer found"
msgstr "프린터를 찾을 수 없습니다!"

#: printer/printerdrake.pm:986
#, c-format
msgid ""
"The following new printers were found and Printerdrake can automatically set "
"them up for you. If you do not want to have all of them set up, unselect the "
"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
msgstr ""

#: printer/printerdrake.pm:987
#, c-format
msgid ""
"The following new printer was found and printerdrake can automatically set "
"it up for you. If you do not want to have it set up, unselect it, or click "
"\"Cancel\".\n"
msgstr ""

#: printer/printerdrake.pm:988
#, c-format
msgid ""
"Note that for certain printer models additional packages need to be "
"installed. So keep your installation media handy.\n"
msgstr ""

#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
#, fuzzy, c-format
msgid "Configuring printer on %s..."
msgstr "프린터 「%s」 설정 중 ..."

#: printer/printerdrake.pm:1049
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:1050
#, c-format
msgid " on "
msgstr ""

#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
#, c-format
msgid "Printer model selection"
msgstr "프린터 모델 선택"

#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
#, c-format
msgid "Which printer model do you have?"
msgstr "어떤 프린터를 가지고 있습니까?"

#: printer/printerdrake.pm:1058
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""

#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4686
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "프린터 「%s」 설정 중 ..."

#: printer/printerdrake.pm:1111
#, c-format
msgid ""
"Now you have turned off automatic printer setup.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1112
#, c-format
msgid ""
"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
"main menu. "
msgstr ""

#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4962
#, fuzzy, c-format
msgid "Configure Auto Administration"
msgstr "원격 관리"

#: printer/printerdrake.pm:1113
#, c-format
msgid ""
"There you can also choose in which situation automatic printer setup is done "
"(On Printerdrake startup, on printing system startup, when connecting a new "
"USB printer)."
msgstr ""

#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
#: printer/printerdrake.pm:4929 printer/printerdrake.pm:5116
#, c-format
msgid "Add a new printer"
msgstr "새 프린터 추가"

#: printer/printerdrake.pm:1262
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: printer/printerdrake.pm:1275
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1292
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1301
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""

#: printer/printerdrake.pm:1352
#, fuzzy, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "프린터 자동검색"

#: printer/printerdrake.pm:1355
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: printer/printerdrake.pm:1358
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: printer/printerdrake.pm:1361
#, fuzzy, c-format
msgid "No auto-detection"
msgstr "자동 검색"

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""

#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
#: printer/printerdrake.pm:2610
#, fuzzy, c-format
msgid "Could not install the %s packages!"
msgstr "%s 팩키지 설치중"

#: printer/printerdrake.pm:1419
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr ""

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Printer auto-detection"
msgstr "프린터 자동 검색"

#: printer/printerdrake.pm:1425
#, c-format
msgid "Detecting devices..."
msgstr "장치를 검색하고 있습니다..."

#: printer/printerdrake.pm:1451
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:1454
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "삼바/윈도우즈 95/98/NT상의 프린터"

#: printer/printerdrake.pm:1458
#, c-format
msgid "Detected %s"
msgstr "%s 발견"

#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
#: printer/printerdrake.pm:1505
#, fuzzy, c-format
msgid "Printer on parallel port #%s"
msgstr "프린터 호스트명 또는 IP"

#: printer/printerdrake.pm:1469
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "네트웍 프린터 (소켓)"

#: printer/printerdrake.pm:1472
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "삼바/윈도우즈 95/98/NT상의 프린터"

#: printer/printerdrake.pm:1550
#, c-format
msgid "Local Printer"
msgstr "지역 프린터"

#: printer/printerdrake.pm:1551
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1555
#, c-format
msgid "You must enter a device or file name!"
msgstr "장치 또는 파일 이름을 입력해야 합니다!"

#: printer/printerdrake.pm:1565
#, c-format
msgid "No printer found!"
msgstr "프린터를 찾을 수 없습니다!"

#: printer/printerdrake.pm:1573
#, c-format
msgid "Local Printers"
msgstr "로컬 프린터"

#: printer/printerdrake.pm:1574
#, c-format
msgid "Available printers"
msgstr "유효한 프린터들"

#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
#, fuzzy, c-format
msgid "The following printer was auto-detected. "
msgstr "다음 팩키지들이 제거될 것입니다."

#: printer/printerdrake.pm:1580
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""

#: printer/printerdrake.pm:1581
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr ""

#: printer/printerdrake.pm:1584
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""

#: printer/printerdrake.pm:1585
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1590
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1593
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""

#: printer/printerdrake.pm:1594
#, fuzzy, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "프린터가 연결된 포트를 선택하세요."

#: printer/printerdrake.pm:1596
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: printer/printerdrake.pm:1597
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "프린터가 연결된 포트를 선택하세요."

#: printer/printerdrake.pm:1599
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: printer/printerdrake.pm:1603
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "프린터 또는 장치를 입력 또는 선택해야 합니다!"

#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
#, fuzzy, c-format
msgid "Aborting"
msgstr "중지"

#: printer/printerdrake.pm:1679
#, c-format
msgid "Remote lpd Printer Options"
msgstr "원격 LPD 프린터 옵션"

#: printer/printerdrake.pm:1680
#, fuzzy, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"원격 LPD 프린터를 사용하기 위해서는\n"
"그 프린터 서버의 호스트명과 그 서버상의 프린터 이름을\n"
"입력해야 합니다."

#: printer/printerdrake.pm:1681
#, c-format
msgid "Remote host name"
msgstr "원격 호스트명"

#: printer/printerdrake.pm:1682
#, c-format
msgid "Remote printer name"
msgstr "원격 프린터명"

#: printer/printerdrake.pm:1685
#, c-format
msgid "Remote host name missing!"
msgstr "원격 호스트명을 찾을 수 없음!"

#: printer/printerdrake.pm:1689
#, c-format
msgid "Remote printer name missing!"
msgstr "원격 프린터명이 빠졌습니다!!"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318 standalone/drakTermServ:447
#: standalone/drakTermServ:769 standalone/drakTermServ:785
#: standalone/drakTermServ:1591 standalone/drakTermServ:1600
#: standalone/drakTermServ:1614 standalone/drakbackup:512
#: standalone/drakbackup:618 standalone/drakbackup:653
#: standalone/drakbackup:754 standalone/draknfs:203
#: standalone/draksambashare:629 standalone/draksambashare:796
#: standalone/harddrake2:256
#, c-format
msgid "Information"
msgstr "정보"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318
#, c-format
msgid "Detected model: %s %s"
msgstr "검색된 모델: %s %s"

#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Scanning network..."
msgstr "네트웍 검색 중 ..."

#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/printerdrake.pm:1859
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT) 프린터 옵션"

#: printer/printerdrake.pm:1860
#, fuzzy, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"삼바 프린터로 인쇄하려면, 삼바 서버의 호스트명 \n"
"(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과, \n"
"가능하다면, 그 서버의 IP 주소 그리고 액세스하려는 프린터의 \n"
"공유 이름, 정식 사용자명, 암호, 작업그룹명을 \n"
"입력해야 합니다."

#: printer/printerdrake.pm:1861
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: printer/printerdrake.pm:1863
#, c-format
msgid "SMB server host"
msgstr "SMB 서버 호스트"

#: printer/printerdrake.pm:1864
#, c-format
msgid "SMB server IP"
msgstr "SMB 서버 IP"

#: printer/printerdrake.pm:1865 standalone/draksambashare:67
#, c-format
msgid "Share name"
msgstr "공유 이름"

#: printer/printerdrake.pm:1868
#, c-format
msgid "Workgroup"
msgstr "작업 그룹"

#: printer/printerdrake.pm:1870
#, c-format
msgid "Auto-detected"
msgstr "자동 검색됨"

#: printer/printerdrake.pm:1880
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "서버 이름 또는 서버 IP를 입력해야 합니다!"

#: printer/printerdrake.pm:1884
#, c-format
msgid "Samba share name missing!"
msgstr "삼바 공유 이름을 찾을 수 없음!"

#: printer/printerdrake.pm:1890
#, c-format
msgid "SECURITY WARNING!"
msgstr ""

#: printer/printerdrake.pm:1891
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1901
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:1904
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: printer/printerdrake.pm:1983
#, c-format
msgid "NetWare Printer Options"
msgstr "넷웨어 프린터 옵션"

#: printer/printerdrake.pm:1984
#, fuzzy, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"넷웨어 프린터로 인쇄하려면, 넷웨어 서버의 호스트명 \n"
"(주의! 그 서버의 TCP/IP 호스트명과는 이름이 다를 수 있습니다.)과 \n"
"액세스하려는 프린터의 큐 이름, 정식 사용자명, 암호를 \n"
"입력해야 합니다."

#: printer/printerdrake.pm:1985
#, c-format
msgid "Printer Server"
msgstr "프린터 서버"

#: printer/printerdrake.pm:1986
#, c-format
msgid "Print Queue Name"
msgstr "프린트 큐 이름"

#: printer/printerdrake.pm:1991
#, c-format
msgid "NCP server name missing!"
msgstr "NCP 서버 이름을 찾을 수 없음!"

#: printer/printerdrake.pm:1995
#, c-format
msgid "NCP queue name missing!"
msgstr "NCP 큐 이름을 찾을 수 없음!"

#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: printer/printerdrake.pm:2122
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/소켓 프린터 옵션"

#: printer/printerdrake.pm:2124
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""

#: printer/printerdrake.pm:2125
#, fuzzy, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"소켓 프린터로 인쇄하기 위해서는, 프린터의 호스트명과 \n"
"포트 번호(옵션)를 지정해야 합니다. HP JetDirect 서버상에서는\n"
"일반적으로 9100 포트를 사용하지만, 다른 서버상에서는 각기\n"
"다를 수 있습니다. 하드웨어 설명서를 참조하세요."

#: printer/printerdrake.pm:2129
#, c-format
msgid "Printer host name or IP missing!"
msgstr "프린터 호스트명 또는 IP가 지정되지 않았습니다!"

#: printer/printerdrake.pm:2158
#, c-format
msgid "Printer host name or IP"
msgstr "프린터 호스트명 또는 IP"

#: printer/printerdrake.pm:2221
#, fuzzy, c-format
msgid "Refreshing Device URI list..."
msgstr "프린터 데이터 갱신 중 ..."

#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
#, c-format
msgid "Printer Device URI"
msgstr "프린터 장치 URI"

#: printer/printerdrake.pm:2225
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"프린터 액세스 주소를 직접 지정할 수 있습니다. 주소는 CUPS 또는 Foomatic 규정"
"을 준수해야 합니다. 그렇지 않은 주소는 모든 스풀러가 지원하지 않습니다."

#: printer/printerdrake.pm:2249
#, c-format
msgid "A valid URI must be entered!"
msgstr "유효한 주소를 입력하세요!"

#: printer/printerdrake.pm:2354
#, fuzzy, c-format
msgid "Pipe into command"
msgstr "작업을 명령으로 파이프 연결"

#: printer/printerdrake.pm:2355
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2356
#, c-format
msgid "Command line"
msgstr "명령 행"

#: printer/printerdrake.pm:2360
#, fuzzy, c-format
msgid "A command line must be entered!"
msgstr "유효한 주소를 입력하세요!"

#: printer/printerdrake.pm:2402
#, c-format
msgid "Your printer %s is currently connected %s."
msgstr ""

#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
#, fuzzy, c-format
msgid "to a parallel port"
msgstr "프린터 호스트명 또는 IP"

#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
#, c-format
msgid "to the USB"
msgstr ""

#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
#, fuzzy, c-format
msgid "via the network"
msgstr "네트웍 활성화 중..."

#: printer/printerdrake.pm:2407
#, c-format
msgid "This type of connection is currently not fully supported by HPLIP."
msgstr ""

#: printer/printerdrake.pm:2409
#, c-format
msgid "You get full HPLIP support for your device if you connect it "
msgstr ""

#: printer/printerdrake.pm:2415
#, c-format
msgid ""
"You can now set up your device with HPLIP anyway (works in many cases), "
msgstr ""

#: printer/printerdrake.pm:2416
#, c-format
msgid "set it up without HPLIP (print-only), "
msgstr ""

#: printer/printerdrake.pm:2416
#, fuzzy, c-format
msgid "or"
msgstr "시"

#: printer/printerdrake.pm:2417
#, c-format
msgid "cancel the setup (for example to reconnect your device)."
msgstr ""

#: printer/printerdrake.pm:2419
#, c-format
msgid ""
"You can always revise your choice by clicking your printer's entry in the "
"main window, "
msgstr ""

#: printer/printerdrake.pm:2420
#, c-format
msgid "clicking the \"%s\" button, "
msgstr ""

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302
#: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319
#: standalone/drakvpn:680 standalone/printerdrake:245
#, c-format
msgid "Edit"
msgstr "편집"

#: printer/printerdrake.pm:2421
#, c-format
msgid "and choosing \"%s\"."
msgstr ""

#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5312
#: printer/printerdrake.pm:5372
#, c-format
msgid "Printer connection type"
msgstr "인터넷 연결 유형"

#: printer/printerdrake.pm:2423 standalone/logdrake:409
#, c-format
msgid "What do you want to do?"
msgstr "무엇을 하고 싶습니까?"

#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
#, c-format
msgid "Set up with HPLIP"
msgstr ""

#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
#, c-format
msgid "Set up without HPLIP"
msgstr ""

#: printer/printerdrake.pm:2426
#, fuzzy, c-format
msgid "Cancel setup"
msgstr "취소"

#: printer/printerdrake.pm:2460
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2462
#, c-format
msgid ""
"To access these extra functions on HP printers they must be set up with "
"HPLIP (HP Linux Imaging and Printing). "
msgstr ""

#: printer/printerdrake.pm:2464
#, c-format
msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2490
#, c-format
msgid "Installing %s package..."
msgstr "%s 팩키지 설치중..."

#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
#: printer/printerdrake.pm:2524
#, fuzzy, c-format
msgid "HPLIP"
msgstr "PLIP(_I)"

#: printer/printerdrake.pm:2497
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2512
#, fuzzy, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr "사용자 그놈 설정 디렉토리 `%s'을(를) 만들 수 없습니다: %s\n"

#: printer/printerdrake.pm:2514
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2524
#, c-format
msgid "Checking device and configuring %s..."
msgstr ""

#: printer/printerdrake.pm:2544
#, fuzzy, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "어떤 섹터를 이동하고 싶으십니까?"

#: printer/printerdrake.pm:2599
#, c-format
msgid "Installing SANE packages..."
msgstr "SANE 팩키지 설치중..."

#: printer/printerdrake.pm:2612
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2627
#, fuzzy, c-format
msgid "Using and Maintaining your %s"
msgstr "기사 \"%s\"을(를) 투고 및 메일로 보냅니다"

#: printer/printerdrake.pm:2641
#, fuzzy, c-format
msgid "Configuring device..."
msgstr "설정 중..."

#: printer/printerdrake.pm:2678
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
#: printer/printerdrake.pm:3115
#, c-format
msgid "Reading printer database..."
msgstr "프린터 데이터베이스 읽는 중 ..."

#: printer/printerdrake.pm:2920
#, c-format
msgid "Enter Printer Name and Comments"
msgstr ""

#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "프린터 이름에는 문자, 숫자 그리고 밑줄(Underscore)만 있어야 합니다."

#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"프린터 「%s」가 이미 존재합니다.\n"
"정말로 기존 설정을 덮어 쓸까요?"

#: printer/printerdrake.pm:2937
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""

#: printer/printerdrake.pm:2946
#, fuzzy, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"모든 프린터는 이름이 있어야 합니다.(예, lp)\n"
"설명과 위치 부분을 입력할 필요는 없습니다.\n"
"그것들은 단지 사용자들을 위한 부연설명일 뿐입니다."

#: printer/printerdrake.pm:2947
#, c-format
msgid "Name of printer"
msgstr "프린터 이름"

#: printer/printerdrake.pm:2948 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Description"
msgstr "설명"

#: printer/printerdrake.pm:2949 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Location"
msgstr "위치"

#: printer/printerdrake.pm:2967
#, c-format
msgid "Preparing printer database..."
msgstr "프린터 데이터베이스 준비 중 ..."

#: printer/printerdrake.pm:3093
#, c-format
msgid "Your printer model"
msgstr "프린터 모델"

#: printer/printerdrake.pm:3094
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
#, c-format
msgid "The model is correct"
msgstr "모델이 정확합니다."

#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
#: printer/printerdrake.pm:3104
#, c-format
msgid "Select model manually"
msgstr "직접 모델 선택"

#: printer/printerdrake.pm:3128
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""

#: printer/printerdrake.pm:3147
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:3179
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""

#: printer/printerdrake.pm:3180
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:3181
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:3182
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:3183
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""

#: printer/printerdrake.pm:3184
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:3186
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "설치"

#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, fuzzy, c-format
msgid "Floppy Disk"
msgstr "부트 플로피"

#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, fuzzy, c-format
msgid "Other place"
msgstr "기타 포트"

#: printer/printerdrake.pm:3205
#, fuzzy, c-format
msgid "Select PPD file"
msgstr "파일을 선택하세요."

#: printer/printerdrake.pm:3209
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:3215
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:3226
#, fuzzy, c-format
msgid "Installing PPD file..."
msgstr "팩키지 설치 중..."

#: printer/printerdrake.pm:3345
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI 윈프린터 설정"

#: printer/printerdrake.pm:3346
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "렉스마크 잉크젯 설정"

#: printer/printerdrake.pm:3372
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: printer/printerdrake.pm:3402
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: printer/printerdrake.pm:3412
#, fuzzy, c-format
msgid "Lexmark X125 configuration"
msgstr "렉스마크 잉크젯 설정"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""

#: printer/printerdrake.pm:3435
#, fuzzy, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "사운드 설정"

#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""

#: printer/printerdrake.pm:3462
#, fuzzy, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "수동 설정"

#: printer/printerdrake.pm:3489
#, fuzzy, c-format
msgid "Canon LBP-810/1120 (CAPT) configuration"
msgstr "수동 설정"

#: printer/printerdrake.pm:3490
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes or on the parallel "
"port. Please connect your printer to the USB or configure it on the machine "
"where it is directly connected to."
msgstr ""

#: printer/printerdrake.pm:3497
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3647
#, fuzzy, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"프린터 기본값 설정\n"
"페이지 크기와 (만약 유효하다면) 잉크 유형이 올바른지\n"
"잘 확인하세요. 고품질 인쇄물을 얻기위해서는 인쇄 속도가\n"
"그 만큼 느려진다는 것을 알고 계세요."

#: printer/printerdrake.pm:3772
#, fuzzy, c-format
msgid "Printer default settings"
msgstr "프린터 모델 선택"

#: printer/printerdrake.pm:3779
#, c-format
msgid "Option %s must be an integer number!"
msgstr "%s 옵션은 정수 번호이어야 합니다!"

#: printer/printerdrake.pm:3783
#, c-format
msgid "Option %s must be a number!"
msgstr "%s 옵션은 숫자이어야 합니다!"

#: printer/printerdrake.pm:3787
#, c-format
msgid "Option %s out of range!"
msgstr "%s 옵션 범위 초과!"

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"이 프린터(%s)를\n"
"기본 프린터로 하시겠습니까?"

#: printer/printerdrake.pm:3855
#, c-format
msgid "Test pages"
msgstr "시험 페이지"

#: printer/printerdrake.pm:3856
#, fuzzy, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"인쇄할 시험 페이지를 선택하세요.\n"
"주의: 사진 시험 페이지를 인쇄하기 위해서는 다소 시간이 걸릴 수 있습니다.\n"
"그리고 저용량의 메모리를 가진 레이저 프린터에서는\n"
"페이지가 나오지 않을 수도 있습니다.\n"
"표준 시험 페이지는 대개 잘 인쇄됩니다."

#: printer/printerdrake.pm:3860
#, c-format
msgid "No test pages"
msgstr "시험 페이지 없음"

#: printer/printerdrake.pm:3861
#, c-format
msgid "Print"
msgstr "인쇄"

#: printer/printerdrake.pm:3886
#, c-format
msgid "Standard test page"
msgstr "표준 시험 페이지"

#: printer/printerdrake.pm:3889
#, c-format
msgid "Alternative test page (Letter)"
msgstr "다른 시험 페이지 (Letter)"

#: printer/printerdrake.pm:3892
#, c-format
msgid "Alternative test page (A4)"
msgstr "시험 페이지 활성화 (A4)"

#: printer/printerdrake.pm:3894
#, c-format
msgid "Photo test page"
msgstr "사진 시험 페이지"

#: printer/printerdrake.pm:3907
#, c-format
msgid "Printing test page(s)..."
msgstr "시험 페이지 인쇄 중..."

#: printer/printerdrake.pm:3927
#, fuzzy, c-format
msgid "Skipping photo test page."
msgstr "사진 시험 페이지"

#: printer/printerdrake.pm:3944
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"시험 인쇄 페이지를 프린터로 보냈습니다.\n"
"인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n"
"인쇄 상황: \n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3948
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"시험 인쇄 페이지를 프린터로 보냈습니다.\n"
"인쇄되기까지 약간의 시간이 걸릴 수 있습니다.\n"

#: printer/printerdrake.pm:3958
#, c-format
msgid "Did it work properly?"
msgstr "올바르게 작동했습니까?"

#: printer/printerdrake.pm:3982
#, c-format
msgid "Raw printer"
msgstr "날(RAW) 프린터"

#: printer/printerdrake.pm:4004
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: printer/printerdrake.pm:4006
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
#: printer/printerdrake.pm:4036
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
#, fuzzy, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세"
"요.\n"
"\n"

#: printer/printerdrake.pm:4016
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」명령을 사용하세"
"요.\n"

#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
#: printer/printerdrake.pm:4043
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
#, fuzzy, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"현재 프린터에 사용할 수 있는 옵션 목록을 보려면, 「인쇄 옵션 목록」을 누르세"
"요.\n"
"\n"

#: printer/printerdrake.pm:4041
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"명령행(터미널 윈도우)에서 파일을 인쇄하려면, 「%s <파일>」 또는 「%s <파일>」"
"명령을 사용하세요.\n"

#: printer/printerdrake.pm:4045
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: printer/printerdrake.pm:4049
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"「%s」와「%s」명령은 또한 특정 인쇄 작업을 위한 옵션 설정을 수정할 수 있게 합"
"니다. 명령행에 원하는 설정값을 추가하세요, 예: 「%s <파일>」.\n"

#: printer/printerdrake.pm:4058
#, fuzzy, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/printerdrake.pm:4059
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/printerdrake.pm:4065
#, c-format
msgid "Print option list"
msgstr "프린터 옵션 목록"

#: printer/printerdrake.pm:4069
#, fuzzy, c-format
msgid "Printing option list..."
msgstr "프린터 옵션 목록"

#: printer/printerdrake.pm:4087
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4090
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:4091
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4095
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""

#: printer/printerdrake.pm:4096
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4098
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:4099
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4102
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:4103
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:4104
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:4105
#, fuzzy, c-format
msgid " - Print head alignment\n"
msgstr "가로방향의 조정"

#: printer/printerdrake.pm:4106
#, fuzzy, c-format
msgid " - Color calibration\n"
msgstr "경고 설정"

#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
#: printer/printerdrake.pm:4209
#, c-format
msgid "Transfer printer configuration"
msgstr "프린터 설정 전송"

#: printer/printerdrake.pm:4148
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"스풀러 %s를 위해 사용한 프린터 설정을 현재 스풀러인 %s로 복사할 수 있습니다. "
"모든 설정 데이터(프린터명, 설명, 위치, 연결 유형, 그리고 기본 옵션값들)가 넘"
"겨질 것입니다. 그러나 작업들은 전송되지 않습니다.\n"
"다음과 같은 이유로인하여 모든 큐가 전송될 수는 없습니다:\n"

#: printer/printerdrake.pm:4151
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS는 노벨 서버상의 프린터나 자유형식 명령어로 데이터를 보내는 프린터는 지원"
"하지 않습니다.\n"

#: printer/printerdrake.pm:4153
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"LPQ는 단지 지역 프린터, 원격 LPD 프린터 그리고 소켓/TCP 프린터만을 지원합니"
"다.\n"

#: printer/printerdrake.pm:4155
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD와 LPRng는 IPP 프린터를 지원하지 않습니다.\n"

#: printer/printerdrake.pm:4157
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"그리고 또한, 이 프로그램이나 「Foomatic 설정」으로 생성되지 않은 큐는 전송될 "
"수 없습니다."

#: printer/printerdrake.pm:4158
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"또한 제조업체가 제공한 PPD 파일이나 CUPS 포함 드라이버로 설정된 프린터도 전송"
"될 수 없습니다."

#: printer/printerdrake.pm:4159
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"전송하려는 프린터들을 선택한 후에 「전송」을 누르세요."

#: printer/printerdrake.pm:4162
#, c-format
msgid "Do not transfer printers"
msgstr "프린터 전송 하지않음"

#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
#, c-format
msgid "Transfer"
msgstr "전송"

#: printer/printerdrake.pm:4175
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"프린터 「%s」가 이미 %s하에 존재함니다.\n"
"덮어 쓸려면 「전송」을 누르세요.\n"
"새 이름을 입력하거나 이 프린터를 지나칠 수도 있습니다."

#: printer/printerdrake.pm:4196
#, c-format
msgid "New printer name"
msgstr "새 프린터 이름"

#: printer/printerdrake.pm:4199
#, c-format
msgid "Transferring %s..."
msgstr "%s 전송 중 ..."

#: printer/printerdrake.pm:4210
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"이전 기본 프린터(「%s」)를 전송하였습니다. 새 프린팅 시스템 %s하에서 그것이 "
"또한 기본 프린터가 되도록 하시겠습니까?"

#: printer/printerdrake.pm:4220
#, c-format
msgid "Refreshing printer data..."
msgstr "프린터 데이터 갱신 중 ..."

#: printer/printerdrake.pm:4230
#, c-format
msgid "Starting network..."
msgstr "네트웍 연결 중..."

#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4278
#: printer/printerdrake.pm:4280
#, c-format
msgid "Configure the network now"
msgstr "지금 네트웍 설정"

#: printer/printerdrake.pm:4275
#, c-format
msgid "Network functionality not configured"
msgstr "네트웍 기능이 설정되지 않았습니다."

#: printer/printerdrake.pm:4276
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"원격 프린터를 설정하려 합니다. 그러기 위해서는 네트웍이 동작하고 있어야 하는"
"데, 아직 네트웍 설정이 되어 있지 않습니다. 네트웍 설정없이 계속 진행하면, 지"
"금 설정하고 있는 프린터를 사용할 수 없습니다. 어떻게 하시겠습니까?"

#: printer/printerdrake.pm:4279
#, c-format
msgid "Go on without configuring the network"
msgstr "네트웍 설정 없이 계속"

#: printer/printerdrake.pm:4310
#, fuzzy, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"설치과정에서 설정한 네트웍을 시작할 수 없습니다. 시스템이 부팅될 때, 네트웍"
"이 자동 실행되도록 되어 있는지 확인하고, 맨드리바 제어 센터(「네트웍과 인터"
"넷」/「연결」)를 이용하여 올바르게 설정하세요.그리고나서 다시 맨드리바 제어 "
"센터(「하드웨어」/「프린터」)를 이용하여, 프린터 설정을 다시 해 보세요."

#: printer/printerdrake.pm:4311
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"네트웍 접근이 불가능했으며, 시작할 수도 없었습니다. 네트웍 설정과 하드웨어를 "
"점검해 주세요. 그리고나서 원격 프린터 설정을 다시 시도해 보세요."

#: printer/printerdrake.pm:4321
#, c-format
msgid "Restarting printing system..."
msgstr "인쇄 시스템 재실행 중 ..."

#: printer/printerdrake.pm:4352
#, c-format
msgid "high"
msgstr "높음"

#: printer/printerdrake.pm:4352
#, c-format
msgid "paranoid"
msgstr "최고"

#: printer/printerdrake.pm:4354
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "보안 수준 %s로 인쇄 시스템 설치 중"

#: printer/printerdrake.pm:4355
#, fuzzy, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"지금 님은 보안수준 %2$s로 운용되는 시스템에\n"
"인쇄 시스템 %1$s을 설치하려고 합니다.\n"
"\n"
"인쇄 시스템은 인쇄작업을 기다렸다가 처리하는\n"
"대몬(백그라운드 프로세스)를 실행시킵니다.\n"
"원격 시스템에서 네트웍으로 이 대몬에 접근할 수도\n"
"있기 때문에, 크래커들의 사냥감이 되기도 합니다.\n"
"따라서 현재 보안 수준에서는 단지 몇몇의 매몬들만\n"
"실행되도록 선택되는 것이 기본입니다.\n"
"\n"
"정말로 이 컴퓨터상의 인쇄 설정을\n"
"원하십니까? "

#: printer/printerdrake.pm:4391
#, c-format
msgid "Starting the printing system at boot time"
msgstr "부팅시 인쇄 시스템 자동실행"

#: printer/printerdrake.pm:4392
#, fuzzy, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"인쇄 시스템(%s)는 컴퓨터가 부팅할 때 자동으로 실행되지\n"
"않을 것입니다.\n"
"\n"
"인쇄 시스템은 크래커들의 잠재적인 공격목표이기 때문에,\n"
"보안 수준을 높게 하였을 시에는 자동실행 기능이 해제될\n"
"수도 있도록 되어 있습니다.\n"
"\n"
"다시 인쇄 시스템의 자동실행 기능이 활성화되도록\n"
"하시겠습니까?"

#: printer/printerdrake.pm:4415
#, c-format
msgid "Checking installed software..."
msgstr "설치된 소프트웨어 확인 중 ..."

#: printer/printerdrake.pm:4421
#, c-format
msgid "Removing %s..."
msgstr "%s 제거 중 ..."

#: printer/printerdrake.pm:4425
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:4449
#, c-format
msgid "Installing %s..."
msgstr "%s 설치 중..."

#: printer/printerdrake.pm:4453
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:4521
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4523
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4537
#, fuzzy, c-format
msgid "Name or IP of remote server:"
msgstr "원격 LPD 서버의 프린터"

#: printer/printerdrake.pm:4557
#, fuzzy, c-format
msgid "Setting Default Printer..."
msgstr "기본 프린터"

#: printer/printerdrake.pm:4577
#, fuzzy, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "원격 CUPS 서버의 프린터"

#: printer/printerdrake.pm:4578
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr ""

#: printer/printerdrake.pm:4580
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr ""

#: printer/printerdrake.pm:4581
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4582
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4584
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4585
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4586
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4588
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr ""

#: printer/printerdrake.pm:4592 printer/printerdrake.pm:4607
#: printer/printerdrake.pm:4611 printer/printerdrake.pm:4617
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4606
#, fuzzy, c-format
msgid "Local CUPS printing system"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:4645
#, c-format
msgid "Select Printer Spooler"
msgstr "프린터 스풀러을 선택하세요."

#: printer/printerdrake.pm:4646
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "어떤 인쇄 시스템(스풀러)을 사용하시겠습니까?"

#: printer/printerdrake.pm:4695
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "프린터 「%s」 설정 중 ..."

#: printer/printerdrake.pm:4710
#, c-format
msgid "Installing Foomatic..."
msgstr "Foomatic 설치 중..."

#: printer/printerdrake.pm:4716
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr ""

#: printer/printerdrake.pm:4911
#, fuzzy, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"다음 프린터들이 설정되었습니다.\n"
"수정하고 싶거나,\n"
"정보를 보고 싶다면 프린터를 클릭하세요.\n"
"새 프린터를 추가하고 싶다면 「프린터 추가」를 누르세요."

#: printer/printerdrake.pm:4941
#, fuzzy, c-format
msgid "Display all available remote CUPS printers"
msgstr "프린터 목록 갱신"

#: printer/printerdrake.pm:4942
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "프린터 목록 갱신"

#: printer/printerdrake.pm:4953
#, c-format
msgid "CUPS configuration"
msgstr "CUPS 설정"

#: printer/printerdrake.pm:4974
#, c-format
msgid "Change the printing system"
msgstr "인쇄시스템 변경"

#: printer/printerdrake.pm:4983
#, c-format
msgid "Normal Mode"
msgstr "일반 모드"

#: printer/printerdrake.pm:4984
#, c-format
msgid "Expert Mode"
msgstr "전문가 모드"

#: printer/printerdrake.pm:5262 printer/printerdrake.pm:5318
#: printer/printerdrake.pm:5404 printer/printerdrake.pm:5413
#, c-format
msgid "Printer options"
msgstr "프린터 옵션"

#: printer/printerdrake.pm:5298
#, c-format
msgid "Modify printer configuration"
msgstr "인터넷 설정 변경"

#: printer/printerdrake.pm:5300
#, fuzzy, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""
"프린터 %s%s: %s: %s\n"
"이 프린터에 대해서 무엇을 수정하시겠습니까?"

#: printer/printerdrake.pm:5305
#, fuzzy, c-format
msgid "This printer is disabled"
msgstr "이 파티션은 크기변경이 허용되지 않습니다."

#: printer/printerdrake.pm:5307
#, c-format
msgid "Do it!"
msgstr "실행"

#: printer/printerdrake.pm:5313 printer/printerdrake.pm:5378
#, c-format
msgid "Printer name, description, location"
msgstr "프린터 이름, 설명, 위치"

#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "프린터 제조업체, 모델, 드라이버"

#: printer/printerdrake.pm:5316 printer/printerdrake.pm:5398
#, c-format
msgid "Printer manufacturer, model"
msgstr "프린터 제조업체, 모델"

#: printer/printerdrake.pm:5320 printer/printerdrake.pm:5408
#, c-format
msgid "Set this printer as the default"
msgstr "이 프린터를 기본으로 설정"

#: printer/printerdrake.pm:5325 printer/printerdrake.pm:5414
#: printer/printerdrake.pm:5416 printer/printerdrake.pm:5425
#, fuzzy, c-format
msgid "Enable Printer"
msgstr "서버 사용"

#: printer/printerdrake.pm:5328 printer/printerdrake.pm:5419
#: printer/printerdrake.pm:5420 printer/printerdrake.pm:5422
#, fuzzy, c-format
msgid "Disable Printer"
msgstr "서버 사용 해제"

#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5426
#, fuzzy, c-format
msgid "Printer communication error handling"
msgstr "인터넷 연결 유형"

#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5430
#, c-format
msgid "Print test pages"
msgstr "시험 페이지 인쇄"

#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5432
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "이 프린터의 사용법 알아보기"

#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5434
#, c-format
msgid "Remove printer"
msgstr "프린터 제거"

#: printer/printerdrake.pm:5386
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "기존 프린터 「%s」 제거 중 ..."

#: printer/printerdrake.pm:5417
#, fuzzy, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "프린터「%s」상에서 인쇄 중"

#: printer/printerdrake.pm:5423
#, fuzzy, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "이제 인터넷 연결 공유가 금지되었습니다."

#: printer/printerdrake.pm:5465
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "정말로 「%s」프린터를 제거합니까?"

#: printer/printerdrake.pm:5469
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "프린터 「%s」 제거 중 ..."

#: printer/printerdrake.pm:5493
#, c-format
msgid "Default printer"
msgstr "기본 프린터"

#: printer/printerdrake.pm:5494
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "「%s」프린터가 기본 프린터로 설정되었습니다."

#: raid.pm:41
#, fuzzy, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "포맷된 RAID md%d에 파티션을 추가할 수 없습니다."

#: raid.pm:145
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "RAID 레벨 %d를 위한 파티션들이 충분하지 않습니다.\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr ""

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, fuzzy, c-format
msgid "Scannerdrake"
msgstr "스캐너 선택"

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr ""

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr "(이 서버상의)"

#: security/help.pm:31
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr "(이 서버상의)"

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80 standalone/draksec:215
#, fuzzy, c-format
msgid "Security Alerts:"
msgstr "보안 수준"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "암호 없음"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, fuzzy, c-format
msgid "Set the user umask."
msgstr "사용자들"

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr "(이 서버상의)"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "일반 모뎀 연결"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "서비스 설정"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr ""

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, fuzzy, c-format
msgid "No password aging for"
msgstr "암호 없음"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, fuzzy, c-format
msgid "Password history length"
msgstr "이 암호는 너무 단순합니다."

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, fuzzy, c-format
msgid "Root umask"
msgstr "암호 없음"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "커널 부트 제한시간"

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "User umask"
msgstr "사용자들"

#: security/l10n.pm:45
#, fuzzy, c-format
msgid "Check open ports"
msgstr "%s 포트에서 발견"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "보안에 신경안씀"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "최저"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "높음"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "더 높음"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "최고"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"이 등급을 사용할려면 매우 주의하여야 합니다. 시스템을 사용하기에는 \n"
"용이하겠지만 매우 민감하게 작동합니다: 인터넷이나 네트웍에 연결된 시스템용\n"
"으로는 사용하지 마세요. 암호기능이 없습니다."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"암호기능이 적용되지만, 네트웍에 연결된 컴퓨터로 사용하기에는 아직 적절하지 않"
"습니다."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"이 등급은 클라이언트로서 인터넷에 접속하는데 적당한 표준 보안등급입니다."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"이 보안등급으로 이 시스템을 서버로 운용할 수 있게 됩니다.\n"
"이 보안등급은 외부의 클라이언트들의 접속을 받아들이는데 있어서 \n"
"충분히 높은 보안등급입니다. 주의: 인터넷 클라이언트로 컴퓨터를 사용한다면, "
"더 낮은 등급을 선택하세요."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"이전 등급과 비슷하지만, 시스템이 완전히 외부접근에서 격리됩니다. 최고 보안 수"
"준입니다."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "DrakSec 기본 옵션"

#: security/level.pm:57
#, c-format
msgid "Please choose the desired security level"
msgstr "희망하는 보안 단계를 선택해 주세요."

#: security/level.pm:61
#, c-format
msgid "Security level"
msgstr "보안 수준"

#: security/level.pm:63
#, c-format
msgid "Use libsafe for servers"
msgstr "서버에 대해 libsafe 사용"

#: security/level.pm:64
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "버퍼 넘침이나 형식화 문자열 공격을 막는 라이브러리."

#: security/level.pm:65
#, c-format
msgid "Security Administrator (login or email)"
msgstr "보안 관리자 (로그인 또는 이메일)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "ALSA (진보된 리눅스 사운드 아키텍처) 사운드 시스템 실행"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anancron은 주기적인 명령 스케쥴러 입니다."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd는 배터리 상태와 syslog를 거쳐서 로그 기록을 감시하는데 사용됩니다.\n"
"또한 배터리량이 미약할때 자동으로 시스템을 셧다운 시켜주는 기능도 합니다."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"정해준 시간에 한번에 하나씩 실행시킵니다. at는 batch 명령들을 시스템\n"
"로드율이 낮을때 수행시킵니다."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron은 사용자가 지정한 프로그램을 주기적으로 특정 시간에 실행시키는 \n"
"표준 UNIX 프로그램입니다. vixie cron은 이 기본 UNIX Cron에 향상된 보안과 \n"
"더 강력한 설정옵션 등의 많은 특징을 추가합니다."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM은 텍스트 기반 프로그램들에게 마우스 기능을 지원합니다.\n"
"또한 콘솔 화면에서 잘라서 붙이기와 팝업 메뉴 기능을 \n"
"지원합니다."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"하드드레이크는 하드웨어 검색을 수행하며, 필요하다면\n"
"새/변경된 하드웨어를 설정합니다."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"아파치(Apache)는 웹 서버입니다. 이것은 HTML이나 CGI 파일 서비스를\n"
"하는데 사용됩니다."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"(통상적으로 inetd라고 하는) 인터넷 수퍼 대몬은 다양한 인터넷 서버를\n"
"필요한 때 실행 시킵니다. 텔넷, FTP, RSH, RLOGIN 등과 같은 많은 \n"
"서비스를 관리합니다. 이것이 실행되어 있지 않으면, 또한 이것이 관리하는\n"
"여러 서비스도 또한 불가능하게 됩니다."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"2.2 커널 시리즈용 패킷 필터를 실행, 네트웍 공격으로부터\n"
"컴퓨터를 보호하는 방화벽을 구축합니다."

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"이 팩키지는 「/etc/sysconfig/keyboard」에 설정되어 있는 \n"
"키보드 맵을 적재합니다. 키보드는 「kbdconfig」명령으로 선택할 수 있습니다.\n"
"대부분의 시스템에서 필요한 것입니다."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"「/usr/include/linux/{autoconf,version}.h」에 대해\n"
"「/boot」에 커널 헤더를 자동 생성."

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "부팅시에 자동 하드웨어 검색 및 설정."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"리눅스 설정(Linuxconf)은 시스템 설정을 유지하기 위하여\n"
"부팅시에 다양한 작업 수행을 준비합니다."

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"LPD는 lpr 명령이 올바르게 작동하기 위해 필요한 인쇄 대몬입니다.\n"
"근본적으로 인쇄 작업들을 프린터로 중재해 주는 서버입니다."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"리눅스 가상 서버, 고성능 서버 구축에\n"
"사용됩니다."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"NAMED(BIND)는 호스트 이름으로 IP 주소를 찾아내는데 사용되는\n"
"도메인 네임 서버입니다."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"네트웍 파일 시스템(NFS), 삼바(SMB/랜 관리자/윈도우즈), 그리고\n"
"NCP(넷웨어)를 마운트하고 언마운트합니다."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"부팅시에 시작하도록 설정된 모든 네트웍 인테페이스를 \n"
"활성화/비활성화 합니다."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n"
"이 서비스는 /etc/export 파일을 설정함으로써 NFS 서버의 기능을 가능하게\n"
"합니다."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS는 TCP/IP 네트웍으로 파일을 공유하는 인기있는 프로토콜입니다.\n"
"이 서비스는 NFS 파일 잠금 기능을 제공합니다."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""
"부팅시에 자동으로 콘솔과 X 환경에서\n"
"숫자키 잠금 모드 사용."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "OKI 4w 및 호환 프린터 지원."

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"PCMCIA는 보통 랩탑(노트북)에 있는 이더넷 카드와 모뎀같은 장치\n"
"들을 지원하기 위한 것입니다. 추가 설정이 없으면 시작되지 않기 때문에,\n"
"이러한 장치가 없는 컴퓨터에 설치되어 있어도 안전합니다."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"포트맵퍼(portmapper)는 NFS와 NIS 같은 프로토콜에 의해 사용되는\n"
"RPC 연결을 관리합니다. 포트맵 서버는 RPC 메커니즘을 이용하는 프로토콜용 서버"
"로\n"
"사용되고 있는 컴퓨터에는 반드시 실행되고 있어야 합니다."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"포스트픽스(Postfix)는 컴퓨터들간에 메일을 주고받는 \n"
"메일 전송 에이전트 프로그램입니다."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"고품질의 난수 생성을 위해 시스템 엔트로피 풀을 저장하고 \n"
"복구합니다."

#: services.pm:76
#, fuzzy, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"오라클 같은 프로그램을 사용하기 위해 날(RAW) 장치를\n"
"(하드디스크 파티션 같은) 블록 장치로 할당."

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Routed 데몬은 RIP 프로토콜을 통해 자동으로 IP 라우터 테이블이 갱신되도록 합니"
"다.\n"
"RIP는 소규모 네트웍을 위한 것이기 때문에, 대규모 네트웍을 위해서는 보다 복잡"
"한\n"
"라우팅 프로토콜이 필요합니다."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat 프로토콜은 네트웍상의 사용자가 구 네트워상에 있는 \n"
"모든 컴퓨터에 대하여 수행능력 메트릭스를 알아 볼 수 있게 합니다."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers 프로토콜은 네트웍상의 사용자들이 다른 컴퓨터상에 로그인한 \n"
"사용자들의 신원을 알 수 있게 합니다."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"rwho 프로토콜은 (finger와 비슷하게) rwho 대몬이 실행되고\n"
"있는 컴퓨터에 로그인한 사용자 목록을 원격 사용자가 볼 수 있게 합니다."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "이 컴퓨터에서 사운드 시스템 실행"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog는 여러 데몬들의 로그 메세지를 여러 종류의 시스템 로그 파일로\n"
"남기는데 유용합니다. 항상 Syslog를 실행시키는것이 좋습니다."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "USB 장치용 드라이버 적재."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr "X 폰트 서버 시작 (X 윈도우를 운영하기 위해서는 필수입니다)."

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "어떤 서비스가 부팅시에 자동 실행되어야 할지 선택하세요."

#: services.pm:127 standalone/draksambashare:111
#, c-format
msgid "Printing"
msgstr "인쇄"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "인터넷"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr "파일 공유"

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr "원격 관리"

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr "데이터베이스 서버"

#: services.pm:209
#, c-format
msgid "running"
msgstr "실행중"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "정지됨"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr "서비스와 대몬"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"죄송합니다.\n"
"이 서비스에 대한 추가정보가 없습니다."

#: services.pm:224 ugtk2.pm:1009
#, c-format
msgid "Info"
msgstr "정보"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr ""

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "자동실행"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "시작"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "중지"

#: share/advertising/01.pl:3
#, c-format
msgid "Mandriva Linux 2006: Packs"
msgstr ""

#: share/advertising/02.pl:3
#, c-format
msgid "Mandriva Linux 2006: More features"
msgstr ""

#: share/advertising/03.pl:3
#, c-format
msgid "Interactive firewall"
msgstr ""

#: share/advertising/04.pl:3
#, c-format
msgid "Desktop search"
msgstr ""

#: share/advertising/05.pl:3
#, c-format
msgid "New package manager"
msgstr ""

#: share/advertising/06.pl:3
#, c-format
msgid "Mandriva Linux 2006: More performances"
msgstr ""

#: share/advertising/07.pl:3
#, c-format
msgid "Latest kernel and GCC"
msgstr ""

#: share/advertising/08.pl:3
#, c-format
msgid "High Availibility"
msgstr ""

#: share/advertising/09.pl:3
#, c-format
msgid "Delta RPM"
msgstr ""

#: share/advertising/10.pl:3
#, c-format
msgid "Low resources setup"
msgstr ""

#: share/advertising/11.pl:3
#, c-format
msgid "Boot time reduction"
msgstr ""

#: share/advertising/12.pl:3
#, c-format
msgid "Mandriva Linux 2006: Easier to use"
msgstr ""

#: share/advertising/13.pl:3
#, c-format
msgid "Latest graphical interfaces: KDE and GNOME"
msgstr ""

#: share/advertising/14.pl:3
#, c-format
msgid "auto-installation servers"
msgstr ""

#: share/advertising/15.pl:3
#, c-format
msgid "Easy and quick installation"
msgstr ""

#: share/advertising/16.pl:3
#, c-format
msgid "Easy configuration thanks to 60 wizards"
msgstr ""

#: share/advertising/17.pl:3
#, c-format
msgid "Look and feel improved"
msgstr ""

#: share/advertising/18.pl:3
#, c-format
msgid "New webmin theme"
msgstr ""

#: share/advertising/19.pl:3
#, c-format
msgid "Mandriva Linux 2006: More support"
msgstr ""

#: share/advertising/20.pl:3
#, c-format
msgid "Better Hardware support"
msgstr ""

#: share/advertising/21.pl:3
#, c-format
msgid "Xen support"
msgstr ""

#: share/advertising/22.pl:3
#, c-format
msgid "Mandriva Linux 2006: More information"
msgstr ""

#: share/advertising/23.pl:3
#, c-format
msgid "Mandriva Linux 2006: Where to buy?"
msgstr ""

#: share/advertising/24.pl:3
#, c-format
msgid "Where to find technical assistance?"
msgstr ""

#: share/advertising/25.pl:3
#, c-format
msgid "How to join the Mandriva Linux community?"
msgstr ""

#: share/advertising/26.pl:3
#, c-format
msgid "How to maintain your system up-to-date?"
msgstr ""

#: share/advertising/intel.pl:3
#, c-format
msgid "Intel Software"
msgstr ""

#: share/advertising/skype.pl:3
#, c-format
msgid "Skype lets you make calls through the Internet for free."
msgstr ""

#: share/compssUsers.pl:26
#, c-format
msgid "Office Workstation"
msgstr "오피스 워크스테이션"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"오피스 프로그램들: 워드프로세서 (OpenOffice.org Writer, Kword), 스프레드쉬트 "
"(OpenOffice.org Calc, Kspread), pdf 뷰어, 등등"

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"오피스 프로그램들: 워드프로세서 (kword, abiword), 스프레드쉬트 (kspread,"
"gnumeric), pdf 뷰어, 등등"

#: share/compssUsers.pl:34
#, c-format
msgid "Game station"
msgstr "게임 스테이션"

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "장난감 프로그램: arcade, boards, strategy, 등등"

#: share/compssUsers.pl:38
#, c-format
msgid "Multimedia station"
msgstr "멀티미디어 스테이션"

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "사운드 및 비디오 연주/편집 프로그램"

#: share/compssUsers.pl:44
#, c-format
msgid "Internet station"
msgstr "인터넷 스테이션"

#: share/compssUsers.pl:45
#, fuzzy, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr "메일/뉴스를 일고 보내며 웹검색을 위한 도구모음(pine, mutt, tin...)"

#: share/compssUsers.pl:50
#, c-format
msgid "Network Computer (client)"
msgstr "네트웍 컴퓨터 (클라이언트)"

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "SSH 및 다른 프로토콜의 클라이언트"

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "설정"

#: share/compssUsers.pl:56
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "쉬운 컴퓨터 설정을 위한 도구"

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr "콘솔 도구"

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "에디터, 쉘, 파일도구, 터미널"

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "C/C++ 개발 라이브러리, 프로그램 및 헤더파일"

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "문서"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "리눅스 및 자유 소프트웨어에 대한 서적과 Howto문서"

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "리눅스 표준 기반. 외부 애플리케이션 지원"

#: share/compssUsers.pl:86
#, c-format
msgid "Apache"
msgstr "아파치와"

#: share/compssUsers.pl:89
#, fuzzy, c-format
msgid "Groupware"
msgstr "그룹"

#: share/compssUsers.pl:90
#, c-format
msgid "Kolab Server"
msgstr "Kolab 서버"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Firewall/Router"
msgstr "방화벽/라우터"

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, c-format
msgid "Internet gateway"
msgstr "인터넷 게이트웨이"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/파일(F)/새로 만들기(_N)"

#: share/compssUsers.pl:98
#, fuzzy, c-format
msgid "Postfix mail server, Inn news server"
msgstr "포스트픽스 메일 서버"

#: share/compssUsers.pl:101
#, fuzzy, c-format
msgid "Directory Server"
msgstr "CD로부터 복구"

#: share/compssUsers.pl:105
#, c-format
msgid "FTP Server"
msgstr "FTP 서버"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:109
#, c-format
msgid "DNS/NIS"
msgstr "DNS/NIS"

#: share/compssUsers.pl:110
#, c-format
msgid "Domain Name and Network Information Server"
msgstr "도메인 네임 및 네트웍 정보 서버"

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "File and Printer Sharing Server"
msgstr "프린터 서버"

#: share/compssUsers.pl:114
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "삼바 서비스"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "데이터베이스"

#: share/compssUsers.pl:118
#, fuzzy, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "PostgreSQL 또는 MySQL 데이터베이스 서버"

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr "웹/FTP"

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "아파치와 프로FTPD"

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "메일"

#: share/compssUsers.pl:127
#, c-format
msgid "Postfix mail server"
msgstr "포스트픽스 메일 서버"

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL 또는 MySQL 데이터베이스 서버"

#: share/compssUsers.pl:138
#, c-format
msgid "Network Computer server"
msgstr "네트웍 컴퓨터 서버"

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS 서버, 삼바 서버, 프락시 서버, SSH 서버"

#: share/compssUsers.pl:147
#, c-format
msgid "KDE Workstation"
msgstr "KDE 워크스테이션"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr "K Desktop 환경, 여러가지 도구를 수반한 기본 그래픽 환경"

#: share/compssUsers.pl:152
#, c-format
msgid "GNOME Workstation"
msgstr "GNOME 워크스테이션"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr "사용자 친화적 프로그램과 데스크탑 도구를 가진 그래픽 환경"

#: share/compssUsers.pl:156
#, fuzzy, c-format
msgid "IceWm Desktop"
msgstr "일터"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "기타 그래픽 데스크탑"

#: share/compssUsers.pl:161
#, fuzzy, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, 윈도우 메이커, 인라이튼먼트, Fvwm, 등등"

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr "유틸리티"

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
#, c-format
msgid "SSH Server"
msgstr "SSH 서비스"

#: share/compssUsers.pl:191
#, fuzzy, c-format
msgid "Webmin"
msgstr "웹민 서비스"

#: share/compssUsers.pl:192
#, fuzzy, c-format
msgid "Webmin Remote Configuration Server"
msgstr "맨드리바 터미널 서버 설정"

#: share/compssUsers.pl:196
#, fuzzy, c-format
msgid "Network Utilities/Monitoring"
msgstr "네트웍 환경 설정"

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:201
#, fuzzy, c-format
msgid "Mandriva Wizards"
msgstr "맨드리바 제어 센터"

#: share/compssUsers.pl:202
#, fuzzy, c-format
msgid "Wizards to configure server"
msgstr "프린터 「%s」 설정 중 ..."

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, fuzzy, c-format
msgid "[keyboard]"
msgstr "키보드"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:146
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:59
#, fuzzy, c-format
msgid "You need to reboot for changes to take effect"
msgstr "변경된것을 적용하기 위해선 리부팅이 필요합니다."

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "로그아웃하고 Crtl-Alt-BackSpace키를 누르세요."

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:102 standalone/drakTermServ:108
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:119
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:125
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:207 standalone/drakTermServ:210
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "맨드리바 터미널 서버 설정"

#: standalone/drakTermServ:216
#, fuzzy, c-format
msgid "dhcpd Config"
msgstr "DHCPD 설정 중..."

#: standalone/drakTermServ:220
#, c-format
msgid "Enable Server"
msgstr "서버 사용"

#: standalone/drakTermServ:226
#, c-format
msgid "Disable Server"
msgstr "서버 사용 해제"

#: standalone/drakTermServ:232
#, c-format
msgid "Start Server"
msgstr "서버 시작"

#: standalone/drakTermServ:238
#, c-format
msgid "Stop Server"
msgstr "서버 중지"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr ""

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr ""

#: standalone/drakTermServ:258
#, c-format
msgid "Add/Del Users"
msgstr "사용자 추가/제거"

#: standalone/drakTermServ:262
#, c-format
msgid "Add/Del Clients"
msgstr "클라이언트 추가/제거"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "그림"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:289 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "첫 실행 마법사"

#: standalone/drakTermServ:326 standalone/drakTermServ:327
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:333
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:379
#, fuzzy, c-format
msgid "Cancel Wizard"
msgstr "마법사를 실행하려면 여기를 누르세요. ->"

#: standalone/drakTermServ:394
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:422
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "클라이언트 추가/제거"

#: standalone/drakTermServ:424
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:426
#, c-format
msgid ""
"Please select default client type (Fat is the default type if 'Use thin' is "
"unchecked).\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:446
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:447 standalone/drakTermServ:769
#: standalone/drakTermServ:785
#, c-format
msgid "This will take a few minutes."
msgstr ""

#: standalone/drakTermServ:453 standalone/drakTermServ:493
#, c-format
msgid "Done!"
msgstr "완료 !"

#: standalone/drakTermServ:464 standalone/drakTermServ:849
#, c-format
msgid "%s failed"
msgstr ""

#: standalone/drakTermServ:473
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""

#: standalone/drakTermServ:479
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:499
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:534
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "맨드리바 터미널 서버 설정"

#: standalone/drakTermServ:535
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""

#: standalone/drakTermServ:541
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""

#: standalone/drakTermServ:559
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""

#: standalone/drakTermServ:579
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:591
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""

#: standalone/drakTermServ:595
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:600
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""

#: standalone/drakTermServ:609
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:630
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:663
#, c-format
msgid "Boot Floppy"
msgstr "부트 플로피"

#: standalone/drakTermServ:665
#, c-format
msgid "Boot ISO"
msgstr "부트 ISO"

#: standalone/drakTermServ:667
#, fuzzy, c-format
msgid "PXE Image"
msgstr "이미지"

#: standalone/drakTermServ:728
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "커널 버전"

#: standalone/drakTermServ:731
#, c-format
msgid "Create PXE images."
msgstr ""

#: standalone/drakTermServ:757
#, c-format
msgid "Install i586 kernel for older clients"
msgstr ""

#: standalone/drakTermServ:767
#, c-format
msgid "Build Whole Kernel -->"
msgstr ""

#: standalone/drakTermServ:774
#, c-format
msgid "No kernel selected!"
msgstr "커널이 선택되지 않았습니다!"

#: standalone/drakTermServ:777
#, c-format
msgid "Build Single NIC -->"
msgstr ""

#: standalone/drakTermServ:781 standalone/drakTermServ:1581
#, fuzzy, c-format
msgid "No NIC selected!"
msgstr "네트웍 카드가 선택 안됨!"

#: standalone/drakTermServ:784
#, c-format
msgid "Build All Kernels -->"
msgstr ""

#: standalone/drakTermServ:797
#, c-format
msgid "<-- Delete"
msgstr "<-- 삭제"

#: standalone/drakTermServ:802
#, fuzzy, c-format
msgid "No image selected!"
msgstr "네트웍 카드가 선택 안됨!"

#: standalone/drakTermServ:805
#, c-format
msgid "Delete All NBIs"
msgstr "모든 NBI 삭제"

#: standalone/drakTermServ:880
#, c-format
msgid "Building images for kernel:"
msgstr ""

#: standalone/drakTermServ:1004
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:1009
#, c-format
msgid "Add User -->"
msgstr "사용자 추가 -->"

#: standalone/drakTermServ:1015
#, c-format
msgid "<-- Del User"
msgstr ""

#: standalone/drakTermServ:1051
#, fuzzy, c-format
msgid "type: %s"
msgstr "유형: "

#: standalone/drakTermServ:1055
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:1086
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "자동 재설정"

#: standalone/drakTermServ:1095
#, c-format
msgid "No net boot images created!"
msgstr ""

#: standalone/drakTermServ:1114
#, fuzzy, c-format
msgid "Thin Client"
msgstr "DHCP 클라이언트"

#: standalone/drakTermServ:1118
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "클라이언트 추가/제거"

#: standalone/drakTermServ:1119
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1120
#, c-format
msgid "Add Client -->"
msgstr ""

#: standalone/drakTermServ:1134
#, fuzzy, c-format
msgid "type: fat"
msgstr "유형: "

#: standalone/drakTermServ:1135
#, fuzzy, c-format
msgid "type: thin"
msgstr "유형: "

#: standalone/drakTermServ:1142
#, fuzzy, c-format
msgid "local config: false"
msgstr "지역 파일들"

#: standalone/drakTermServ:1143
#, fuzzy, c-format
msgid "local config: true"
msgstr "재설정"

#: standalone/drakTermServ:1151
#, fuzzy, c-format
msgid "<-- Edit Client"
msgstr "<-- 클라이언트 삭제"

#: standalone/drakTermServ:1176
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1183
#, fuzzy, c-format
msgid "Delete Client"
msgstr "<-- 클라이언트 삭제"

#: standalone/drakTermServ:1205
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1250
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1266
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1300
#, c-format
msgid "Subnet:"
msgstr ""

#: standalone/drakTermServ:1307
#, c-format
msgid "Netmask:"
msgstr "넷마스크:"

#: standalone/drakTermServ:1314
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1321
#, c-format
msgid "Subnet Mask:"
msgstr "서브네트 마스크:"

#: standalone/drakTermServ:1328
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1335
#, fuzzy, c-format
msgid "Domain Name:"
msgstr "도메인 이름"

#: standalone/drakTermServ:1343
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "삼바 서비스"

#: standalone/drakTermServ:1354
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1355
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1397
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1399
#, c-format
msgid "Write Config"
msgstr "설정 기록"

#: standalone/drakTermServ:1415
#, fuzzy, c-format
msgid "dhcpd Server Configuration"
msgstr "고급 설정"

#: standalone/drakTermServ:1416
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1419
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""

#: standalone/drakTermServ:1572
#, c-format
msgid "Write to %s failed!"
msgstr ""

#: standalone/drakTermServ:1585
#, c-format
msgid "Please insert floppy disk:"
msgstr "플로피를 넣어 주세요:"

#: standalone/drakTermServ:1589
#, c-format
msgid "Could not access the floppy!"
msgstr ""

#: standalone/drakTermServ:1591
#, c-format
msgid "Floppy can be removed now"
msgstr ""

#: standalone/drakTermServ:1594
#, c-format
msgid "No floppy drive available!"
msgstr "유효한 프로피 드라이브를 찾을 수 없습니다!"

#: standalone/drakTermServ:1600
#, c-format
msgid "PXE image is %s/%s"
msgstr ""

#: standalone/drakTermServ:1602
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "%s 파일에 쓰기 오류"

#: standalone/drakTermServ:1614
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: standalone/drakTermServ:1618
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: standalone/drakTermServ:1638
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: standalone/drakTermServ:1797
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1810
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "폰트를 찾을 수 없습니다."

#: standalone/drakTermServ:1811
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1813
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1815
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1832
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "%s 발견"

#: standalone/drakTermServ:1834 standalone/drakTermServ:1907
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "폰트를 찾을 수 없습니다."

#: standalone/drakTermServ:1935
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:2075
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38 standalone/drakhosts:123
#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
#: standalone/draknfs:546 standalone/draksambashare:187
#: standalone/draksambashare:208 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Error!"
msgstr "오류!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr "필요한 이미지 파일 %s를 찾을 수 없습니다."

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "자동 설치 설정기"

#: standalone/drakautoinst:42
#, fuzzy, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""
"이제 자동 설치 플로피를 만들 것입니다. 이것은 다소 위험한 작업이 될 수 있으"
"며, 신중하게 사용되어져야 합니다.\n"
"\n"
"이것의 특징은, 일부 값을 변경하기 위하여 일부 과정에서 대화모드가 나타나기는 "
"하지만, 기본적으로 이 컴퓨터에서 수행한 설치작업을 자동반복하게 합니다.\n"
"\n"
"안전상의 이유로, 이 컴퓨터상에서의 설치과정과는 상관없이, 파티션 나누기와 포"
"맷하기는 자동으로 이루어지지 않습니다.\n"
"\n"
"계속 진행합니까?"

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "재시도"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "수동"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "자동 과정 설정기"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr "각 과정에 대하여 수동설치와 자동반복설치를 선택하세요."

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "자동 설치 플로피 생성"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "%s 드라이브에 빈 플로피 디스크를 넣으세요"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "자동 설치 플로피 생성"

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"플로피가 성공적으로 생성되었습니다.\n"
"이젠 설치과정를 반복할 수 있습니다."

#: standalone/drakautoinst:287
#, c-format
msgid "Auto Install"
msgstr "자동 설치"

#: standalone/drakautoinst:356
#, c-format
msgid "Add an item"
msgstr "항목 추가"

#: standalone/drakautoinst:363
#, c-format
msgid "Remove the last item"
msgstr "마지막 항목 삭제"

#: standalone/drakbackup:156
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid ""
"Star should be selected if you want to backup EA or ACLs, otherwise choose "
"tar"
msgstr ""

#: standalone/drakbackup:163
#, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server. Multiple "
"users can be in a comma seperated list"
msgstr ""

#: standalone/drakbackup:164
#, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""

#: standalone/drakbackup:165
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""

#: standalone/drakbackup:166
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""

#: standalone/drakbackup:167
#, c-format
msgid ""
"Selecting this option allows you to view the raw output from the restore "
"process, after a file restore."
msgstr ""

#: standalone/drakbackup:168
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""

#: standalone/drakbackup:169
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:343
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:347
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:393
#, c-format
msgid "Interval cron not available as non-root"
msgstr ""

#: standalone/drakbackup:477 standalone/logdrake:440
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:481 standalone/logdrake:445
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""

#: standalone/drakbackup:491
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:493
#, c-format
msgid "Old user list:\n"
msgstr ""

#: standalone/drakbackup:495
#, c-format
msgid "New user list:\n"
msgstr ""

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr "전체 진행"

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr ""

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "%s를 열 수 없습니다: %s\n"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: standalone/drakbackup:643
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "암호 없음"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: standalone/drakbackup:645
#, fuzzy, c-format
msgid "Can not find %s on %s"
msgstr "%s를 열 수 없습니다: %s\n"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr ""

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: standalone/drakbackup:703
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr ""

#: standalone/drakbackup:707
#, c-format
msgid "Does not appear to be recordable media!"
msgstr ""

#: standalone/drakbackup:712
#, c-format
msgid "Not erasable media!"
msgstr ""

#: standalone/drakbackup:754
#, c-format
msgid "This may take a moment to erase the media."
msgstr ""

#: standalone/drakbackup:812
#, c-format
msgid "Permission problem accessing CD."
msgstr ""

#: standalone/drakbackup:839
#, c-format
msgid "No tape in %s!"
msgstr ""

#: standalone/drakbackup:948
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:968 standalone/drakbackup:1000
#, c-format
msgid "Backup system files..."
msgstr "시스템 파일 백업..."

#: standalone/drakbackup:1001 standalone/drakbackup:1040
#, c-format
msgid "Hard Disk Backup files..."
msgstr "하드 디스크 백업 파일들"

#: standalone/drakbackup:1039
#, c-format
msgid "Backup User files..."
msgstr "사요자 파일 백업..."

#: standalone/drakbackup:1073
#, c-format
msgid "Backup Other files..."
msgstr "다른 파일 백업..."

#: standalone/drakbackup:1074
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr ""

#: standalone/drakbackup:1079
#, c-format
msgid "No changes to backup!"
msgstr "백업할 변경사항이 없습니다!"

#: standalone/drakbackup:1095 standalone/drakbackup:1117
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1104
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: standalone/drakbackup:1105
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""

#: standalone/drakbackup:1107
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""

#: standalone/drakbackup:1122
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1127
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: standalone/drakbackup:1136
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""

#: standalone/drakbackup:1137
#, c-format
msgid " Error while sending mail. \n"
msgstr "메일 전송 중 오류.\n"

#: standalone/drakbackup:1167
#, c-format
msgid "Can not create catalog!"
msgstr ""

#: standalone/drakbackup:1321
#, fuzzy, c-format
msgid "Problem installing %s"
msgstr "팩키지 설치중 문제 발생 %s"

#: standalone/drakbackup:1409
#, fuzzy, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "시스템 파일 먼저 백업:"

#: standalone/drakbackup:1410 standalone/drakbackup:1473
#: standalone/drakbackup:1539
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Incremental Backups"
msgstr ""

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1414
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: standalone/drakbackup:1445
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "백업에 포함할 모든 사용자를 확인하세요."

#: standalone/drakbackup:1472
#, c-format
msgid "Do not include the browser cache"
msgstr ""

#: standalone/drakbackup:1526
#, fuzzy, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "폰트 파일이나 디렉토리를 선택 후, '추가'를 누르세요."

#: standalone/drakbackup:1527 standalone/drakfont:658
#, c-format
msgid "Remove Selected"
msgstr "선택 항목 제거"

#: standalone/drakbackup:1590
#, c-format
msgid "Users"
msgstr "사용자들"

#: standalone/drakbackup:1610
#, c-format
msgid "Use network connection to backup"
msgstr "네트웍을 사용해 백업"

#: standalone/drakbackup:1612
#, c-format
msgid "Net Method:"
msgstr ""

#: standalone/drakbackup:1616
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1617
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""

#: standalone/drakbackup:1619
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
"  지금  \n"
"전송"

#: standalone/drakbackup:1621
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""

#: standalone/drakbackup:1624
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "호스트명:"

#: standalone/drakbackup:1629
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr ""

#: standalone/drakbackup:1641
#, c-format
msgid "Remember this password"
msgstr "비밀번호 기억"

#: standalone/drakbackup:1653
#, c-format
msgid "Need hostname, username and password!"
msgstr ""

#: standalone/drakbackup:1744
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr ""

#: standalone/drakbackup:1747
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "CD/DVD 용량을 선택하세요."

#: standalone/drakbackup:1752
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "CD/DVD 용량을 선택하세요."

#: standalone/drakbackup:1759
#, fuzzy, c-format
msgid "Multisession CD"
msgstr "멀티미디어 스테이션"

#: standalone/drakbackup:1761
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1767
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "CDRW 매체를 사용하고 있는지 확인하세요."

#: standalone/drakbackup:1768
#, c-format
msgid " Erase Now "
msgstr " 지금 삭제"

#: standalone/drakbackup:1774
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1776
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "장치"

#: standalone/drakbackup:1778
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "장치"

#: standalone/drakbackup:1809
#, c-format
msgid "No CD device defined!"
msgstr "CD 장치가 정의되지 않았습니다!"

#: standalone/drakbackup:1851
#, c-format
msgid "Use tape to backup"
msgstr "테입을 사용한 백업"

#: standalone/drakbackup:1854
#, c-format
msgid "Device name to use for backup"
msgstr ""

#: standalone/drakbackup:1860
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1866
#, c-format
msgid "Use tape hardware compression (EXPERIMENTAL)"
msgstr ""

#: standalone/drakbackup:1872
#, fuzzy, c-format
msgid "Do not rewind tape after backup"
msgstr "테입을 사용한 백업"

#: standalone/drakbackup:1878
#, fuzzy, c-format
msgid "Erase tape before backup"
msgstr "테입을 사용한 백업"

#: standalone/drakbackup:1884
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "테입을 사용한 백업"

#: standalone/drakbackup:1965
#, fuzzy, c-format
msgid "Enter the directory to save to:"
msgstr "저장할 디렉토리를 선택하세요."

#: standalone/drakbackup:1969
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "저장할 디렉토리를 선택하세요."

#: standalone/drakbackup:1974
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""

#: standalone/drakbackup:1978
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""

#: standalone/drakbackup:2045
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2050
#, c-format
msgid "HardDrive / NFS"
msgstr "하드 디스크 / NFS"

#: standalone/drakbackup:2065 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "hourly"
msgstr "매시"

#: standalone/drakbackup:2065 standalone/drakbackup:2067
#: standalone/drakbackup:2072
#, c-format
msgid "daily"
msgstr "매일"

#: standalone/drakbackup:2065 standalone/drakbackup:2068
#: standalone/drakbackup:2073
#, c-format
msgid "weekly"
msgstr "매주"

#: standalone/drakbackup:2065 standalone/drakbackup:2069
#: standalone/drakbackup:2074
#, c-format
msgid "monthly"
msgstr "매월"

#: standalone/drakbackup:2065 standalone/drakbackup:2070
#: standalone/drakbackup:2075
#, c-format
msgid "custom"
msgstr "사용자 색"

#: standalone/drakbackup:2079
#, c-format
msgid "January"
msgstr "일월"

#: standalone/drakbackup:2079
#, c-format
msgid "February"
msgstr "이월"

#: standalone/drakbackup:2079
#, c-format
msgid "March"
msgstr "삼월"

#: standalone/drakbackup:2080
#, c-format
msgid "April"
msgstr "사월"

#: standalone/drakbackup:2080
#, c-format
msgid "May"
msgstr "오월"

#: standalone/drakbackup:2080
#, c-format
msgid "June"
msgstr "유월"

#: standalone/drakbackup:2080
#, c-format
msgid "July"
msgstr "칠월"

#: standalone/drakbackup:2080
#, c-format
msgid "August"
msgstr "팔월"

#: standalone/drakbackup:2080
#, c-format
msgid "September"
msgstr "구월"

#: standalone/drakbackup:2081
#, c-format
msgid "October"
msgstr "시월"

#: standalone/drakbackup:2081
#, c-format
msgid "November"
msgstr "십일월"

#: standalone/drakbackup:2081
#, c-format
msgid "December"
msgstr "십이월"

#: standalone/drakbackup:2084
#, c-format
msgid "Sunday"
msgstr "일요일"

#: standalone/drakbackup:2084
#, c-format
msgid "Monday"
msgstr "월요일"

#: standalone/drakbackup:2084
#, c-format
msgid "Tuesday"
msgstr "화요일"

#: standalone/drakbackup:2085
#, c-format
msgid "Wednesday"
msgstr "수요일"

#: standalone/drakbackup:2085
#, c-format
msgid "Thursday"
msgstr "목요일"

#: standalone/drakbackup:2085
#, c-format
msgid "Friday"
msgstr "금요일"

#: standalone/drakbackup:2085
#, c-format
msgid "Saturday"
msgstr "토요일"

#: standalone/drakbackup:2115
#, fuzzy, c-format
msgid "Delete cron entry"
msgstr "<-- 클라이언트 삭제"

#: standalone/drakbackup:2116
#, fuzzy, c-format
msgid "Add cron entry"
msgstr "프린터"

#: standalone/drakbackup:2174
#, c-format
msgid "Use daemon"
msgstr "대몬 사용"

#: standalone/drakbackup:2178
#, fuzzy, c-format
msgid "Please choose the time interval between each backup"
msgstr ""
"백업간 시간 간격을\n"
"선택하세요."

#: standalone/drakbackup:2186
#, c-format
msgid "Minute"
msgstr "분"

#: standalone/drakbackup:2190
#, c-format
msgid "Hour"
msgstr "시"

#: standalone/drakbackup:2194
#, c-format
msgid "Day"
msgstr "하루씩"

#: standalone/drakbackup:2198
#, c-format
msgid "Month"
msgstr "한달씩"

#: standalone/drakbackup:2202
#, fuzzy, c-format
msgid "Weekday (start)"
msgstr "수요일"

#: standalone/drakbackup:2206
#, fuzzy, c-format
msgid "Weekday (end)"
msgstr "수요일"

#: standalone/drakbackup:2210
#, fuzzy, c-format
msgid "Profile"
msgstr "프로파일"

#: standalone/drakbackup:2216
#, fuzzy, c-format
msgid "Current crontab:"
msgstr "현재 사용자"

#: standalone/drakbackup:2224
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr ""
"백업용 매체를\n"
"선택하세요."

#: standalone/drakbackup:2228
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "백업에 포함할 모든 사용자를 확인하세요."

#: standalone/drakbackup:2229
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "Please choose the archive program"
msgstr "복구할 날짜를 선택하세요."

#: standalone/drakbackup:2298
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "복구할 날짜를 선택하세요."

#: standalone/drakbackup:2302
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "백업 파일에 쿼터 사용"

#: standalone/drakbackup:2304
#, c-format
msgid "Send mail report after each backup to:"
msgstr "백업 후 보고 메일 보내기:"

#: standalone/drakbackup:2310
#, c-format
msgid "Return address for sent mail:"
msgstr ""

#: standalone/drakbackup:2316
#, fuzzy, c-format
msgid "SMTP server for mail:"
msgstr "SMB 서버 호스트"

#: standalone/drakbackup:2320
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: standalone/drakbackup:2321
#, fuzzy, c-format
msgid "View restore log after file restore."
msgstr "다른 파일들을 목구하려면, OK를 누르세요."

#: standalone/drakbackup:2366
#, c-format
msgid "What"
msgstr "대상"

#: standalone/drakbackup:2371
#, c-format
msgid "Where"
msgstr "장소"

#: standalone/drakbackup:2376
#, c-format
msgid "When"
msgstr "시간"

#: standalone/drakbackup:2381
#, c-format
msgid "More Options"
msgstr "추가 옵션"

#: standalone/drakbackup:2394
#, fuzzy, c-format
msgid "Backup destination not configured..."
msgstr "네트웍 기능이 설정되지 않았습니다."

#: standalone/drakbackup:2414 standalone/drakbackup:4339
#, c-format
msgid "Drakbackup Configuration"
msgstr "드레이크 백업 설정"

#: standalone/drakbackup:2430
#, c-format
msgid "Please choose where you want to backup"
msgstr "백업할 곳을 선택하세요."

#: standalone/drakbackup:2433
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr ""

#: standalone/drakbackup:2433
#, c-format
msgid "Across Network"
msgstr "네트웍 경유"

#: standalone/drakbackup:2433
#, c-format
msgid "On CD-R"
msgstr ""

#: standalone/drakbackup:2433
#, c-format
msgid "On Tape Device"
msgstr ""

#: standalone/drakbackup:2479
#, c-format
msgid "Backup Users"
msgstr "사용자 백업"

#: standalone/drakbackup:2480
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "기본 프린터"

#: standalone/drakbackup:2493
#, c-format
msgid "Please choose what you want to backup"
msgstr "백업할 대상을 선택하세요."

#: standalone/drakbackup:2494
#, c-format
msgid "Backup System"
msgstr "백업 시스템"

#: standalone/drakbackup:2496
#, c-format
msgid "Select user manually"
msgstr "수동으로 사용자 선택"

#: standalone/drakbackup:2525
#, c-format
msgid "Please select data to backup..."
msgstr "백업할 데이터를 선택하세요..."

#: standalone/drakbackup:2597
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: standalone/drakbackup:2598
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: standalone/drakbackup:2600
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: standalone/drakbackup:2604
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: standalone/drakbackup:2605
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr ""

#: standalone/drakbackup:2606
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr ""

#: standalone/drakbackup:2609
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: standalone/drakbackup:2614
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: standalone/drakbackup:2615
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2616
#, c-format
msgid " on device: %s"
msgstr "장치: %s"

#: standalone/drakbackup:2617
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2618
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: standalone/drakbackup:2619
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: standalone/drakbackup:2621
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr ""

#: standalone/drakbackup:2623
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: standalone/drakbackup:2624
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: standalone/drakbackup:2625
#, fuzzy, c-format
msgid ""
"\n"
"- Options:\n"
msgstr "옵션들"

#: standalone/drakbackup:2626
#, c-format
msgid "\tDo not include System Files\n"
msgstr ""

#: standalone/drakbackup:2628
#, fuzzy, c-format
msgid "\tBackups use %s and bzip2\n"
msgstr "사용자 파일 백업"

#: standalone/drakbackup:2629
#, fuzzy, c-format
msgid "\tBackups use %s and gzip\n"
msgstr "사용자 파일 백업"

#: standalone/drakbackup:2630
#, fuzzy, c-format
msgid "\tBackups use %s only\n"
msgstr "사용자 파일 백업"

#: standalone/drakbackup:2632
#, fuzzy, c-format
msgid "\tUse .backupignore files\n"
msgstr "백업 파일에 쿼터 사용"

#: standalone/drakbackup:2633
#, c-format
msgid "\tSend mail to %s\n"
msgstr ""

#: standalone/drakbackup:2634
#, c-format
msgid "\tSend mail from %s\n"
msgstr ""

#: standalone/drakbackup:2635
#, fuzzy, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "CUPS 서버 IP"

#: standalone/drakbackup:2637
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""

#: standalone/drakbackup:2638
#, c-format
msgid "\t-Hard drive.\n"
msgstr ""

#: standalone/drakbackup:2639
#, c-format
msgid "\t-CD-R.\n"
msgstr ""

#: standalone/drakbackup:2640
#, c-format
msgid "\t-Tape \n"
msgstr ""

#: standalone/drakbackup:2641
#, c-format
msgid "\t-Network by FTP.\n"
msgstr ""

#: standalone/drakbackup:2642
#, c-format
msgid "\t-Network by SSH.\n"
msgstr ""

#: standalone/drakbackup:2643
#, c-format
msgid "\t-Network by rsync.\n"
msgstr ""

#: standalone/drakbackup:2645
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: standalone/drakbackup:2650
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2652
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr ""
"선택된 파일\n"
"복구"

#: standalone/drakbackup:2654 standalone/drakbackup:2664
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2657
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr "사용자들 복구"

#: standalone/drakbackup:2662
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr "다른 것들 복구"

#: standalone/drakbackup:2841
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: standalone/drakbackup:2843
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "다음 번에는 그것을 선택 해제 또는 제거하세요."

#: standalone/drakbackup:2853
#, c-format
msgid "Backup files are corrupted"
msgstr ""

#: standalone/drakbackup:2874
#, c-format
msgid "          All of your selected data have been          "
msgstr ""

#: standalone/drakbackup:2875
#, c-format
msgid "          Successfully Restored on %s       "
msgstr ""

#: standalone/drakbackup:2976
#, c-format
msgid "/usr/bin/star not found, using tar..."
msgstr ""

#: standalone/drakbackup:3012
#, c-format
msgid "         Restore Configuration       "
msgstr "         설정 복구       "

#: standalone/drakbackup:3040
#, c-format
msgid "OK to restore the other files."
msgstr "다른 파일들을 목구하려면, OK를 누르세요."

#: standalone/drakbackup:3056
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: standalone/drakbackup:3121
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "복구할 날짜를 선택하세요."

#: standalone/drakbackup:3158
#, c-format
msgid "Restore from Hard Disk."
msgstr "하드 디스크에서 복구"

#: standalone/drakbackup:3160
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "백업 파일들이 저장될 디렉토리를 입력하세요."

#: standalone/drakbackup:3164
#, fuzzy, c-format
msgid "Directory with backups"
msgstr "모든 백업 복구"

#: standalone/drakbackup:3218
#, c-format
msgid "Select another media to restore from"
msgstr "다른 복구 매체 선택"

#: standalone/drakbackup:3220
#, c-format
msgid "Other Media"
msgstr "다른 매체"

#: standalone/drakbackup:3225
#, c-format
msgid "Restore system"
msgstr "시스템 복구"

#: standalone/drakbackup:3226
#, c-format
msgid "Restore Users"
msgstr "사용자들 복구"

#: standalone/drakbackup:3227
#, c-format
msgid "Restore Other"
msgstr "다른 것들 복구"

#: standalone/drakbackup:3229
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "([/] 대신에) 복구 경로 선택"

#: standalone/drakbackup:3233 standalone/drakbackup:3514
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "사용자 정의 복구"

#: standalone/drakbackup:3236
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: standalone/drakbackup:3238
#, c-format
msgid "Remove user directories before restore."
msgstr "복구하기 전에 사용자 디랙토리들을 제거"

#: standalone/drakbackup:3322
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3325
#, c-format
msgid "Search Backups"
msgstr ""

#: standalone/drakbackup:3343
#, fuzzy, c-format
msgid "No matches found..."
msgstr "프린터를 찾을 수 없습니다!"

#: standalone/drakbackup:3347
#, fuzzy, c-format
msgid "Restore Selected"
msgstr ""
"선택된 파일\n"
"복구"

#: standalone/drakbackup:3482
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3488
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3497
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"선택된 파일\n"
"복구"

#: standalone/drakbackup:3573
#, c-format
msgid "Backup files not found at %s."
msgstr "%s에서 백업 파일을 찾을 수 없습니다."

#: standalone/drakbackup:3586
#, c-format
msgid "Restore From CD"
msgstr "CD로부터 복구"

#: standalone/drakbackup:3586
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: standalone/drakbackup:3588
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: standalone/drakbackup:3598
#, c-format
msgid "Restore From Tape"
msgstr "테입으로부터 복구"

#: standalone/drakbackup:3598
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: standalone/drakbackup:3600
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network"
msgstr "네트웍을 통한 복구"

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#: standalone/drakbackup:3612
#, c-format
msgid "Host Name"
msgstr "호스트명"

#: standalone/drakbackup:3613
#, c-format
msgid "Host Path or Module"
msgstr ""

#: standalone/drakbackup:3620
#, c-format
msgid "Password required"
msgstr "암호가 필요합니다."

#: standalone/drakbackup:3626
#, c-format
msgid "Username required"
msgstr "사용자명이 필요합니다."

#: standalone/drakbackup:3629
#, c-format
msgid "Hostname required"
msgstr "호스트명이 필요합니다."

#: standalone/drakbackup:3634
#, c-format
msgid "Path or Module required"
msgstr ""

#: standalone/drakbackup:3646
#, c-format
msgid "Files Restored..."
msgstr ""

#: standalone/drakbackup:3649
#, c-format
msgid "Restore Failed..."
msgstr "복구 실패..."

#: standalone/drakbackup:3677
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "폰트를 찾을 수 없습니다."

#: standalone/drakbackup:3901 standalone/drakbackup:3970
#, fuzzy, c-format
msgid "Search for files to restore"
msgstr "다른 복구 매체 선택"

#: standalone/drakbackup:3905
#, c-format
msgid "Restore all backups"
msgstr "모든 백업 복구"

#: standalone/drakbackup:3913
#, c-format
msgid "Custom Restore"
msgstr "사용자 정의 복구"

#: standalone/drakbackup:3917 standalone/drakbackup:3966
#, c-format
msgid "Restore From Catalog"
msgstr "카탈로그로부터 복구"

#: standalone/drakbackup:3938
#, fuzzy, c-format
msgid "Unable to find backups to restore...\n"
msgstr "복구할 데이터를 선택하세요..."

#: standalone/drakbackup:3939
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "이것이 맞습니까?"

#: standalone/drakbackup:3940
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3942
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3958
#, c-format
msgid "CD in place - continue."
msgstr ""

#: standalone/drakbackup:3963
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3964
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "CD로부터 복구"

#: standalone/drakbackup:4000
#, c-format
msgid "Restore Progress"
msgstr "복구 진행"

#: standalone/drakbackup:4108
#, c-format
msgid "Build Backup"
msgstr "백업 빌드"

#: standalone/drakbackup:4141 standalone/drakbackup:4438
#, c-format
msgid "Restore"
msgstr "복구"

#: standalone/drakbackup:4233
#, c-format
msgid "Please select data to restore..."
msgstr "복구할 데이터를 선택하세요..."

#: standalone/drakbackup:4273
#, c-format
msgid "Backup system files"
msgstr "시스템 파일 백업"

#: standalone/drakbackup:4276
#, c-format
msgid "Backup user files"
msgstr "사용자 파일 백업"

#: standalone/drakbackup:4279
#, c-format
msgid "Backup other files"
msgstr "다른 파일 백업"

#: standalone/drakbackup:4282 standalone/drakbackup:4316
#, c-format
msgid "Total Progress"
msgstr "전체 진행"

#: standalone/drakbackup:4308
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "파일 전송 중 ..."

#: standalone/drakbackup:4311
#, c-format
msgid "Sending files..."
msgstr "파일 전송 중 ..."

#: standalone/drakbackup:4381
#, c-format
msgid "Backup Now from configuration file"
msgstr "지금 설정 파일로부터 백업"

#: standalone/drakbackup:4386
#, c-format
msgid "View Backup Configuration."
msgstr "백업 설정 보기"

#: standalone/drakbackup:4412
#, c-format
msgid "Wizard Configuration"
msgstr "마법사 설정"

#: standalone/drakbackup:4417
#, c-format
msgid "Advanced Configuration"
msgstr "고급 설정"

#: standalone/drakbackup:4422
#, fuzzy, c-format
msgid "View Configuration"
msgstr "설정"

#: standalone/drakbackup:4426
#, c-format
msgid "View Last Log"
msgstr ""

#: standalone/drakbackup:4431
#, c-format
msgid "Backup Now"
msgstr "지금 백업"

#: standalone/drakbackup:4435
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: standalone/drakbackup:4473
#, fuzzy, c-format
msgid "Load profile"
msgstr "로컬 파일"

#: standalone/drakbackup:4482
#, fuzzy, c-format
msgid "Save profile as..."
msgstr "새 이름으로 저장"

#: standalone/drakbackup:4504 standalone/drakbackup:4507
#, c-format
msgid "Drakbackup"
msgstr "드레이크 백업"

#: standalone/drakboot:49
#, c-format
msgid "No bootloader found, creating a new configuration"
msgstr ""

#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/파일(_F)"

#: standalone/drakboot:85 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr "/파일(F)/종료(_Q)"

#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:125
#, c-format
msgid "Text only"
msgstr ""

#: standalone/drakboot:126
#, c-format
msgid "Verbose"
msgstr ""

#: standalone/drakboot:127
#, c-format
msgid "Silent"
msgstr ""

#: standalone/drakboot:134
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:135
#, fuzzy, c-format
msgid "Do you want to configure it now?"
msgstr "이 설정을 테스트해 보시겠습니까?"

#: standalone/drakboot:144
#, c-format
msgid "Install themes"
msgstr "테마 설치"

#: standalone/drakboot:146
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "프린터 모델 선택"

#: standalone/drakboot:149
#, fuzzy, c-format
msgid "Graphical boot mode:"
msgstr "프린터 모델 선택"

#: standalone/drakboot:151
#, c-format
msgid "Theme"
msgstr "테마"

#: standalone/drakboot:154
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"콘솔하에서\n"
"테마 보이기"

#: standalone/drakboot:159
#, c-format
msgid "Create new theme"
msgstr "새 테마 만들기"

#: standalone/drakboot:191
#, fuzzy, c-format
msgid "Default user"
msgstr "기본 프린터"

#: standalone/drakboot:192
#, fuzzy, c-format
msgid "Default desktop"
msgstr "기본값"

#: standalone/drakboot:195
#, c-format
msgid "No, I do not want autologin"
msgstr "아니오, 자동로그인을 사용하지 않습니다."

#: standalone/drakboot:196
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "예, 자동로그인을 사용합니다."

#: standalone/drakboot:203
#, c-format
msgid "System mode"
msgstr "시스템 모드"

#: standalone/drakboot:206
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "시작할 때 X-Window 실행"

#: standalone/drakboot:272
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, fuzzy, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr "맨드리바 버그 보고 도구"

#: standalone/drakbug:46
#, c-format
msgid "Mandriva Linux Control Center"
msgstr "맨드리바 제어 센터"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr "동기화 도구"

#: standalone/drakbug:49 standalone/drakbug:152
#, c-format
msgid "Standalone Tools"
msgstr "개별 도구"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "하드 드레이크"

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr "맨드리바 온라인"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "메뉴 드레이크"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "기타"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr "원격 제어"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "소프트웨어 관리자"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr "윈도우즈 이주 도구"

#: standalone/drakbug:58 standalone/draksambashare:1236
#, c-format
msgid "Userdrake"
msgstr "사용자 드레이크"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr "설정 마법사"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "꾸러미 찾기"

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "팩키지:"

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "커널:"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""

#: standalone/drakbug:107
#, c-format
msgid "Report"
msgstr "보고"

#: standalone/drakbug:162
#, c-format
msgid "Not installed"
msgstr "설치되지 않았습니다."

#: standalone/drakbug:174
#, fuzzy, c-format
msgid "Package not installed"
msgstr "설치되지 않았습니다."

#: standalone/drakclock:29
#, fuzzy, c-format
msgid "DrakClock"
msgstr "드레이크 백업"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "재설정"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "시간대"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "시간대 - 드레이크시계"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - 드레이크시계"

#: standalone/drakclock:47
#, fuzzy, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "하드웨어 시계 GMT 설정"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "네트웍 인터페이스"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr ""

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "서버:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "리셋"

#: standalone/drakclock:224
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?"

#: standalone/drakconnect:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "네트웍 설정 (%d 어뎁터)"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Gateway:"
msgstr "게이트웨이:"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Interface:"
msgstr "인터페이스:"

#: standalone/drakconnect:93 standalone/net_monitor:116
#, c-format
msgid "Wait please"
msgstr "기다려 주세요."

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "인터페이스"

#: standalone/drakconnect:109 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "State"
msgstr "상태:"

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr "호스트명: "

#: standalone/drakconnect:128
#, fuzzy, c-format
msgid "Configure hostname..."
msgstr "마우스 설정"

#: standalone/drakconnect:142 standalone/drakconnect:845
#, c-format
msgid "LAN configuration"
msgstr "LAN 설정"

#: standalone/drakconnect:147
#, c-format
msgid "Configure Local Area Network..."
msgstr "지역 네트웍 설정..."

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "적용"

#: standalone/drakconnect:188
#, fuzzy, c-format
msgid "Manage connections"
msgstr "캐이블 연결"

#: standalone/drakconnect:215
#, fuzzy, c-format
msgid "Device selected"
msgstr "선택 항목 제거"

#: standalone/drakconnect:296
#, fuzzy, c-format
msgid "IP configuration"
msgstr "CUPS 설정"

#: standalone/drakconnect:335
#, fuzzy, c-format
msgid "DNS servers"
msgstr "DNS 서버"

#: standalone/drakconnect:343
#, fuzzy, c-format
msgid "Search Domain"
msgstr "NIS 도메인"

#: standalone/drakconnect:351
#, fuzzy, c-format
msgid "static"
msgstr "IP 자동할당"

#: standalone/drakconnect:351
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:515
#, fuzzy, c-format
msgid "Flow control"
msgstr "<control>S"

#: standalone/drakconnect:516
#, fuzzy, c-format
msgid "Line termination"
msgstr "인터넷 스테이션"

#: standalone/drakconnect:527
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "커널 부트 제한시간"

#: standalone/drakconnect:531
#, fuzzy, c-format
msgid "Use lock file"
msgstr "파일을 선택하세요."

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:536
#, fuzzy, c-format
msgid "Busy wait"
msgstr "쿠웨이트"

#: standalone/drakconnect:541
#, fuzzy, c-format
msgid "Modem sound"
msgstr "모델"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "사용"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "사용불가"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr "매체 범주"

#: standalone/drakconnect:594
#, c-format
msgid "Module name"
msgstr "모듈 이름"

#: standalone/drakconnect:595
#, fuzzy, c-format
msgid "Mac Address"
msgstr "IP 주소"

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr "버스"

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr "버스상의 위치"

#: standalone/drakconnect:700 standalone/drakgw:311
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"어떠한 네트웍 어댑터도 발견되지 않습니다. 하드웨어 설정 도구를 실행해 보세요."

#: standalone/drakconnect:708
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "네트웍 인터페이스를 선택하세요."

#: standalone/drakconnect:712
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "네트웍 인터페이스를 선택하세요."

#: standalone/drakconnect:744
#, fuzzy, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"네트웍을 다시 시작하는 도중에 문제가 발생했습니다:\n"
"\n"
"%s"

#: standalone/drakconnect:745
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:761
#, c-format
msgid "No IP"
msgstr ""

#: standalone/drakconnect:762
#, fuzzy, c-format
msgid "No Mask"
msgstr "잘못된 팩키지"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "up"
msgstr "위로"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "down"
msgstr "아래로"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Connected"
msgstr "연결됨"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Not connected"
msgstr "연결 안됨"

#: standalone/drakconnect:800
#, c-format
msgid "Disconnect..."
msgstr "연결 끊기..."

#: standalone/drakconnect:800
#, c-format
msgid "Connect..."
msgstr "연결..."

#: standalone/drakconnect:841
#, fuzzy, c-format
msgid "Deactivate now"
msgstr "지금 비활성화"

#: standalone/drakconnect:841
#, fuzzy, c-format
msgid "Activate now"
msgstr "지금 활성화"

#: standalone/drakconnect:849
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"설정된 인터페이스가 없습니다.\n"
"「설정」을 눌러 인터페이스를 먼저 설정하세요."

#: standalone/drakconnect:863
#, c-format
msgid "LAN Configuration"
msgstr "LAN 설정"

#: standalone/drakconnect:875
#, c-format
msgid "Adapter %s: %s"
msgstr "어댑터 %s: %s"

#: standalone/drakconnect:884
#, c-format
msgid "Boot Protocol"
msgstr "부트 프로토콜"

#: standalone/drakconnect:885
#, c-format
msgid "Started on boot"
msgstr "부팅시 시작됨"

#: standalone/drakconnect:921
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakconnect:975 standalone/net_applet:51
#, fuzzy, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""
"인터넷 연결이 없습니다.\n"
"「설정」을 눌러 먼저 연결을 설정하세요."

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
#, fuzzy, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "네트웍 인터페이스를 선택하세요."

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr "인터넷 연결 설정"

#: standalone/drakconnect:994
#, fuzzy, c-format
msgid "Third DNS server (optional)"
msgstr "첫번째 DNS 서버 (옵션)"

#: standalone/drakconnect:1016
#, c-format
msgid "Internet Connection Configuration"
msgstr "인터넷 연결 설정"

#: standalone/drakconnect:1017
#, c-format
msgid "Internet access"
msgstr "인터넷 액세스"

#: standalone/drakconnect:1019 standalone/net_monitor:95
#, c-format
msgid "Connection type: "
msgstr "연결 유형: "

#: standalone/drakconnect:1022
#, c-format
msgid "Status:"
msgstr "상태:"

#: standalone/drakconnect:1027
#, c-format
msgid "Parameters"
msgstr "인자"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr ""

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr ""

#: standalone/drakedm:42
#, c-format
msgid "XDM (X Display Manager)"
msgstr ""

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr ""

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:72
#, fuzzy, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "팩키지 %s가 필요합니다. 설치하겠습니까?"

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "설치된 폰트 검색"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr "설치된 폰트 선택 해제"

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr "모든 폰트 분석"

#: standalone/drakfont:210
#, fuzzy, c-format
msgid "No fonts found"
msgstr "폰트를 찾을 수 없습니다."

#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
#: standalone/drakfont:412 standalone/drakfont:426
#, c-format
msgid "done"
msgstr "완료"

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr ""

#: standalone/drakfont:258
#, c-format
msgid "Reselect correct fonts"
msgstr "올바른 폰트 재선택"

#: standalone/drakfont:261
#, fuzzy, c-format
msgid "Could not find any font.\n"
msgstr "폰트를 찾을 수 없었습니다.\n"

#: standalone/drakfont:271
#, c-format
msgid "Search for fonts in installed list"
msgstr "설치된 목록에서 폰트 검색"

#: standalone/drakfont:296
#, fuzzy, c-format
msgid "%s fonts conversion"
msgstr "pfm 폰트 변환"

#: standalone/drakfont:325
#, c-format
msgid "Fonts copy"
msgstr "폰트 복사"

#: standalone/drakfont:328
#, c-format
msgid "True Type fonts installation"
msgstr "트루타입 폰트 설치"

#: standalone/drakfont:335
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "기다려 주세요. ttmkfdir 실행 중..."

#: standalone/drakfont:336
#, c-format
msgid "True Type install done"
msgstr "트루타입 설치 완료"

#: standalone/drakfont:342 standalone/drakfont:357
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:351
#, c-format
msgid "Ghostscript referencing"
msgstr "고스트스크립트 참조"

#: standalone/drakfont:361
#, c-format
msgid "Suppress Temporary Files"
msgstr "임시 파일 은폐"

#: standalone/drakfont:364
#, c-format
msgid "Restart XFS"
msgstr "XFS 재시작"

#: standalone/drakfont:410 standalone/drakfont:420
#, c-format
msgid "Suppress Fonts Files"
msgstr "폰트 파일들 은폐"

#: standalone/drakfont:422
#, c-format
msgid "xfs restart"
msgstr "XFS 재시작"

#: standalone/drakfont:430
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""

#: standalone/drakfont:474 standalone/drakfont:483
#, c-format
msgid "DrakFont"
msgstr ""

#: standalone/drakfont:484
#, c-format
msgid "Font List"
msgstr "폰트 목록"

#: standalone/drakfont:487
#, c-format
msgid "Get Windows Fonts"
msgstr ""

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "정보"

#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
#, c-format
msgid "Uninstall"
msgstr "삭제"

#: standalone/drakfont:496
#, c-format
msgid "Import"
msgstr "연결"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:514
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""

#: standalone/drakfont:523
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:539
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:558
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "이 폰트를 지원할 프로그램들을 선택하세요"

#: standalone/drakfont:569
#, c-format
msgid "Ghostscript"
msgstr "고스트스크립트"

#: standalone/drakfont:570
#, c-format
msgid "StarOffice"
msgstr "스타 오피스"

#: standalone/drakfont:571
#, c-format
msgid "Abiword"
msgstr "아비워드"

#: standalone/drakfont:572
#, c-format
msgid "Generic Printers"
msgstr "일반 프린터"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "폰트 파일이나 디렉토리를 선택 후, '추가'를 누르세요."

#: standalone/drakfont:587
#, c-format
msgid "File Selection"
msgstr "파일 선택"

#: standalone/drakfont:591
#, c-format
msgid "Fonts"
msgstr "글꼴"

#: standalone/drakfont:654
#, fuzzy, c-format
msgid "Import fonts"
msgstr "폰트 수입"

#: standalone/drakfont:659
#, fuzzy, c-format
msgid "Install fonts"
msgstr "폰트 제거"

#: standalone/drakfont:694
#, c-format
msgid "click here if you are sure."
msgstr "이상이 없으면 여기를 누르세요."

#: standalone/drakfont:696
#, c-format
msgid "here if no."
msgstr "그렇지 않다면, 여기를 누르세요."

#: standalone/drakfont:735
#, c-format
msgid "Unselected All"
msgstr "모든 선택 해제"

#: standalone/drakfont:738
#, c-format
msgid "Selected All"
msgstr "모두 선택"

#: standalone/drakfont:741
#, c-format
msgid "Remove List"
msgstr "제거 목록"

#: standalone/drakfont:752 standalone/drakfont:771
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "폰트 수입"

#: standalone/drakfont:756 standalone/drakfont:776
#, c-format
msgid "Initial tests"
msgstr "초기화 테스트"

#: standalone/drakfont:757
#, c-format
msgid "Copy fonts on your system"
msgstr "시스템 폰트 복사"

#: standalone/drakfont:758
#, c-format
msgid "Install & convert Fonts"
msgstr "폰트 설치 및 변환"

#: standalone/drakfont:759
#, c-format
msgid "Post Install"
msgstr "후반 설치"

#: standalone/drakfont:777
#, c-format
msgid "Remove fonts on your system"
msgstr "시스템 폰트 제거"

#: standalone/drakfont:778
#, c-format
msgid "Post Uninstall"
msgstr "후반 설치제거"

#: standalone/drakgw:50 standalone/drakvpn:51
#, fuzzy, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "죄송합니다. 2.4 커널만 지원됩니다."

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr "인터넷 연결 공유"

#: standalone/drakgw:79
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"이제 인터넷 연결 공유를 위해서 님의 컴퓨터를 설정하려고 합니다.\n"
"이로인해, 지역 네트웍의 다른 컴퓨터들도 이 컴퓨터의 인터넷 연결을 사용할 수 "
"있게 됩니다.\n"
"\n"
"주의: 지역 네트웍(랜)을 목적으로 설치된 네트웍 어댑터가 있어야 합니다."

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"인터넷 연결공유 설정은 이미 완료되었습니다.\n"
"현재 가능한 상태입니다.\n"
"\n"
"무슨 작업을 하시겠습니까?"

#: standalone/drakgw:99
#, fuzzy, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"인터넷 연결공유 설정은 이미 완료되었습니다.\n"
"현재 불가능한 상태입니다.\n"
"\n"
"무슨 작업을 하시겠습니까?"

#: standalone/drakgw:105
#, c-format
msgid "Reconfigure"
msgstr "재설정"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"시스템에 오직 하나의 설정된 네트웍 어댑터가 있습니다:\n"
"\n"
"%s\n"
"\n"
"그 어댑터로 지역 네트웍을 설정할 것입니다."

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr "어느 네트웍 어댑터가 지역 네트웍으로 연결될 것인지 선택하세요."

#: standalone/drakgw:177
#, fuzzy, c-format
msgid "Local Area Network settings"
msgstr "C 클래스 지역 네트웍"

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr ""

#: standalone/drakgw:182
#, fuzzy, c-format
msgid "The internal domain name"
msgstr "새 프린터 이름"

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "현재 설정 %s에서 잠재적인 랜 주소 충돌이 발견됩니다!\n"

#: standalone/drakgw:204
#, fuzzy, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr "맨드리바 터미널 서버 설정"

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr ""

#: standalone/drakgw:209
#, fuzzy, c-format
msgid "The DNS Server IP"
msgstr "DHCP 서버 IP"

#: standalone/drakgw:236
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""

#: standalone/drakgw:243
#, fuzzy, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "자동 재설정"

#: standalone/drakgw:244
#, c-format
msgid "The DHCP start range"
msgstr ""

#: standalone/drakgw:245
#, c-format
msgid "The DHCP end range"
msgstr ""

#: standalone/drakgw:246
#, c-format
msgid "The default lease (in seconds)"
msgstr ""

#: standalone/drakgw:247
#, c-format
msgid "The maximum lease (in seconds)"
msgstr ""

#: standalone/drakgw:270
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr ""

#: standalone/drakgw:274
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr ""

#: standalone/drakgw:275
#, c-format
msgid "Admin mail"
msgstr ""

#: standalone/drakgw:276
#, fuzzy, c-format
msgid "Visible hostname"
msgstr "원격 호스트명"

#: standalone/drakgw:277
#, fuzzy, c-format
msgid "Proxy port"
msgstr "속성"

#: standalone/drakgw:278
#, fuzzy, c-format
msgid "Cache size (MB)"
msgstr "크기"

#: standalone/drakgw:300
#, fuzzy, c-format
msgid "Broadcast printer information"
msgstr "하드 디스크 정보"

#: standalone/drakgw:317
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "이제 인터넷 연결 공유가 허용되었습니다."

#: standalone/drakgw:323
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "이제 인터넷 연결 공유가 금지되었습니다."

#: standalone/drakgw:329
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"모든 것이 설정되었습니다.\n"
"이제 자동 네트웍 설정기능(DHCP)으로 지역 네트워상의 다른 컴퓨터와 인터넷 연"
"결 공유를 할 수 있습니다."

#: standalone/drakgw:364
#, c-format
msgid "Disabling servers..."
msgstr "서버 중지 중..."

#: standalone/drakgw:378
#, c-format
msgid "Firewalling configuration detected!"
msgstr "방화벽 설정이 감지되었습니다!"

#: standalone/drakgw:379
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"경고! 기존의 방화벽 설정이 감지되었습니다. 설치가 끝난 후에 직접 수정할 필요"
"가 있습니다."

#: standalone/drakgw:384
#, c-format
msgid "Configuring..."
msgstr "설정 중..."

#: standalone/drakgw:385
#, c-format
msgid "Configuring firewall..."
msgstr ""

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""

#: standalone/drakhelp:51
#, fuzzy, c-format
msgid "Mandriva Linux Help Center"
msgstr "맨드리바 제어 센터"

#: standalone/drakhelp:51
#, c-format
msgid "No Help entry for %s\n"
msgstr ""

#: standalone/drakhosts:98
#, c-format
msgid "Please add an host to be able to modify it."
msgstr ""

#: standalone/drakhosts:108
#, fuzzy, c-format
msgid "Please modify information"
msgstr "자세한 정보"

#: standalone/drakhosts:109
#, fuzzy, c-format
msgid "Please delete information"
msgstr "자세한 정보"

#: standalone/drakhosts:110
#, fuzzy, c-format
msgid "Please add information"
msgstr "자세한 정보"

#: standalone/drakhosts:115
#, c-format
msgid "IP address:"
msgstr "IP 주소 :"

#: standalone/drakhosts:116
#, c-format
msgid "Host name:"
msgstr "호스트명: :"

#: standalone/drakhosts:117
#, c-format
msgid "Host Aliases:"
msgstr ""

#: standalone/drakhosts:123
#, c-format
msgid "Please enter a valid IP address."
msgstr ""

#: standalone/drakhosts:129
#, c-format
msgid "Same IP is already in %s file."
msgstr ""

#: standalone/drakhosts:197
#, c-format
msgid "Host Aliases"
msgstr ""

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr ""

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr ""

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr ""

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr ""

#: standalone/drakids:26
#, fuzzy, c-format
msgid "Allowed addresses"
msgstr "모든 사용자 허용"

#: standalone/drakids:57
#, c-format
msgid "Log"
msgstr "기록"

#: standalone/drakids:61
#, fuzzy, c-format
msgid "Clear logs"
msgstr "모두 삭제"

#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:466
#, c-format
msgid "Blacklist"
msgstr ""

#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:471
#, c-format
msgid "Whitelist"
msgstr ""

#: standalone/drakids:71
#, fuzzy, c-format
msgid "Remove from blacklist"
msgstr "LVM으로부터 제거"

#: standalone/drakids:72
#, c-format
msgid "Move to whitelist"
msgstr ""

#: standalone/drakids:84
#, fuzzy, c-format
msgid "Remove from whitelist"
msgstr "LVM으로부터 제거"

#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:381
#, fuzzy, c-format
msgid "Unable to contact daemon"
msgstr "분기할 수 없습니다: %s"

#: standalone/drakids:202
#, c-format
msgid "Date"
msgstr "날짜"

#: standalone/drakids:203
#, fuzzy, c-format
msgid "Attacker"
msgstr "상세설명"

#: standalone/drakids:204
#, fuzzy, c-format
msgid "Attack type"
msgstr "유형: "

#: standalone/drakids:205
#, c-format
msgid "Service"
msgstr "서비스"

#: standalone/drakids:206 standalone/net_applet:72
#, c-format
msgid "Network interface"
msgstr "네트웍 인터페이스"

#: standalone/draknfs:41
#, c-format
msgid "map root user as anonymous"
msgstr ""

#: standalone/draknfs:42
#, c-format
msgid "map all users to anonymous user"
msgstr ""

#: standalone/draknfs:43
#, c-format
msgid "No user UID mapping"
msgstr ""

#: standalone/draknfs:44
#, c-format
msgid "allow real remote root access"
msgstr ""

#: standalone/draknfs:83
#, c-format
msgid "NFS server"
msgstr "NFS 서버"

#: standalone/draknfs:83
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr ""

#: standalone/draknfs:84
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr ""

#: standalone/draknfs:100 standalone/draksambashare:203
#, c-format
msgid "Directory Selection"
msgstr ""

#: standalone/draknfs:105 standalone/draksambashare:208
#, c-format
msgid "Should be a directory."
msgstr ""

#: standalone/draknfs:136
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""

#: standalone/draknfs:151
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
"off root squashing. This option is mainly useful for diskless clients "
"(no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
"exported public FTP directories, news spool directories, etc. The opposite "
"option is no user UID mapping (no_all_squash), which is the default "
"setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
"the uid and gid of the anonymous account.\n"
msgstr ""

#: standalone/draknfs:167
#, c-format
msgid "Synchronous access:"
msgstr ""

#: standalone/draknfs:168
#, c-format
msgid "Secured Connection:"
msgstr ""

#: standalone/draknfs:169
#, c-format
msgid "Read-Only share:"
msgstr ""

#: standalone/draknfs:171
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr ""

#: standalone/draknfs:172
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""

#: standalone/draknfs:173
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""

#: standalone/draknfs:306
#, c-format
msgid "Please add an NFS share to be able to modify it."
msgstr ""

#: standalone/draknfs:378
#, fuzzy, c-format
msgid "Advanced Options Help"
msgstr "고급 설정"

#: standalone/draknfs:389
#, c-format
msgid "NFS directory"
msgstr ""

#: standalone/draknfs:391 standalone/draksambashare:594
#: standalone/draksambashare:773
#, c-format
msgid "Directory:"
msgstr "폴더:"

#: standalone/draknfs:394
#, c-format
msgid "Host access"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Access:"
msgstr ""

#: standalone/draknfs:396
#, c-format
msgid "Hosts Access"
msgstr ""

#: standalone/draknfs:399
#, c-format
msgid "User ID Mapping"
msgstr ""

#: standalone/draknfs:401
#, c-format
msgid "User ID:"
msgstr "사용자 ID :"

#: standalone/draknfs:401
#, c-format
msgid "Help User ID"
msgstr ""

#: standalone/draknfs:402
#, c-format
msgid "Anonymous user ID:"
msgstr ""

#: standalone/draknfs:403
#, c-format
msgid "Anonymous Group ID:"
msgstr ""

#: standalone/draknfs:444
#, c-format
msgid "Can't create this directory."
msgstr ""

#: standalone/draknfs:447
#, c-format
msgid "You must specify hosts access."
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Share Directory"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "Hosts Wildcard"
msgstr ""

#: standalone/draknfs:527
#, c-format
msgid "General Options"
msgstr "일반적인 선택사항"

#: standalone/draknfs:527
#, c-format
msgid "Custom Options"
msgstr ""

#: standalone/draknfs:539 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Please enter a directory to share."
msgstr ""

#: standalone/draknfs:546
#, c-format
msgid "Please use the modify button to set right access."
msgstr ""

#: standalone/draknfs:600
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr ""

#: standalone/draknfs:609
#, c-format
msgid "Failed to add NFS share."
msgstr ""

#: standalone/draknfs:616
#, c-format
msgid "Failed to Modify NFS share."
msgstr ""

#: standalone/draknfs:623
#, c-format
msgid "Failed to remove an NFS share."
msgstr ""

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr "전체 설정을 따름"

#: standalone/drakperm:22
#, fuzzy, c-format
msgid "Custom settings"
msgstr "사용자 정의 파티션 나누기"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "사용자 정의 파티션 나누기"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "편집 가능"

#: standalone/drakperm:48 standalone/drakperm:323
#: standalone/draksambashare:101
#, c-format
msgid "Path"
msgstr "경로"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "사용자"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "그룹"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "허가권"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr ""

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr "현재 규칙 편집"

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "위로"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr "선택된 규칙 한 단계 위로"

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "아래로"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr "선택된 규칙 한 단계 아래로"

#: standalone/drakperm:122
#, fuzzy, c-format
msgid "Add a rule"
msgstr "규칙 추가"

#: standalone/drakperm:122
#, c-format
msgid "Add a new rule at the end"
msgstr "새 규칙 끝에 추가"

#: standalone/drakperm:123
#, c-format
msgid "Delete selected rule"
msgstr "선택된 규칙 삭제"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "찾아보기"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "사용자"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "그룹"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "other"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "읽기"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "쓰기"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "실행"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, fuzzy, c-format
msgid "Sticky-bit"
msgstr "스티키 비트"

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "UID 설정"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr "실행시 소유자 아이디 사용"

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "GID 설정"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr "실행시 그룹 아이디 사용"

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "사용자:"

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "그룹:"

#: standalone/drakperm:298
#, c-format
msgid "Current user"
msgstr "현재 사용자"

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr ""

#: standalone/drakperm:309
#, c-format
msgid "Path selection"
msgstr "경로 선택"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr "속성"

#: standalone/drakperm:380
#, c-format
msgid ""
"The first character of the path must be a slash (\"/\"):\n"
"\"%s\""
msgstr ""

#: standalone/drakperm:390
#, c-format
msgid "Both the username and the group must valid!"
msgstr ""

#: standalone/drakperm:391
#, c-format
msgid "User: %s"
msgstr ""

#: standalone/drakperm:392
#, c-format
msgid "Group: %s"
msgstr ""

#: standalone/drakroam:33
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""

#: standalone/drakroam:48
#, c-format
msgid "SSID"
msgstr ""

#: standalone/drakroam:49
#, c-format
msgid "Signal strength"
msgstr ""

#: standalone/drakroam:51
#, c-format
msgid "Encryption"
msgstr "암호화"

#: standalone/drakroam:112
#, c-format
msgid "Please enter settings for wireless network \"%s\""
msgstr ""

#: standalone/drakroam:123
#, c-format
msgid "DNS server"
msgstr ""

#: standalone/drakroam:228
#, c-format
msgid "Connect"
msgstr "연결"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:229 standalone/printerdrake:251
#, c-format
msgid "Refresh"
msgstr "새로 고침"

#: standalone/draksambashare:68
#, fuzzy, c-format
msgid "Share directory"
msgstr "디렉토리가 아닙니다"

#: standalone/draksambashare:69 standalone/draksambashare:102
#, c-format
msgid "Comment"
msgstr "설명"

#: standalone/draksambashare:70 standalone/draksambashare:103
#, fuzzy, c-format
msgid "Browseable"
msgstr "찾아보기"

#: standalone/draksambashare:71
#, c-format
msgid "Public"
msgstr "공개"

#: standalone/draksambashare:72 standalone/draksambashare:108
#, fuzzy, c-format
msgid "Writable"
msgstr "쓰기"

#: standalone/draksambashare:73 standalone/draksambashare:149
#, fuzzy, c-format
msgid "Create mask"
msgstr "생성"

#: standalone/draksambashare:74 standalone/draksambashare:150
#, fuzzy, c-format
msgid "Directory mask"
msgstr "모든 백업 복구"

#: standalone/draksambashare:75
#, fuzzy, c-format
msgid "Read list"
msgstr "읽기"

#: standalone/draksambashare:76 standalone/draksambashare:109
#: standalone/draksambashare:608
#, fuzzy, c-format
msgid "Write list"
msgstr "쓰기"

#: standalone/draksambashare:77 standalone/draksambashare:141
#, fuzzy, c-format
msgid "Admin users"
msgstr "사용자 추가"

#: standalone/draksambashare:78 standalone/draksambashare:142
#, fuzzy, c-format
msgid "Valid users"
msgstr "사용자 추가"

#: standalone/draksambashare:79
#, fuzzy, c-format
msgid "Inherit Permissions"
msgstr "허가권"

#: standalone/draksambashare:80 standalone/draksambashare:143
#, fuzzy, c-format
msgid "Hide dot files"
msgstr "파일 숨기기"

#: standalone/draksambashare:82 standalone/draksambashare:148
#, fuzzy, c-format
msgid "Preserve case"
msgstr "선택사항"

#: standalone/draksambashare:83
#, fuzzy, c-format
msgid "Force create mode"
msgstr "프린터 모델"

#: standalone/draksambashare:84
#, fuzzy, c-format
msgid "Force group"
msgstr "작업 그룹"

#: standalone/draksambashare:85 standalone/draksambashare:147
#, fuzzy, c-format
msgid "Default case"
msgstr "기본 프린터"

#: standalone/draksambashare:100
#, c-format
msgid "Printer name"
msgstr ""

#: standalone/draksambashare:104 standalone/draksambashare:600
#, c-format
msgid "Printable"
msgstr ""

#: standalone/draksambashare:105
#, c-format
msgid "Print Command"
msgstr ""

#: standalone/draksambashare:106
#, c-format
msgid "LPQ command"
msgstr ""

#: standalone/draksambashare:107
#, c-format
msgid "Guest ok"
msgstr ""

#: standalone/draksambashare:110 standalone/draksambashare:151
#: standalone/draksambashare:609
#, fuzzy, c-format
msgid "Inherit permissions"
msgstr "허가권"

#: standalone/draksambashare:112
#, c-format
msgid "Create mode"
msgstr ""

#: standalone/draksambashare:113
#, c-format
msgid "Use client driver"
msgstr ""

#: standalone/draksambashare:139
#, fuzzy, c-format
msgid "Read List"
msgstr "제거 목록"

#: standalone/draksambashare:140
#, fuzzy, c-format
msgid "Write List"
msgstr "쓰기"

#: standalone/draksambashare:145
#, fuzzy, c-format
msgid "Force Group"
msgstr "그룹"

#: standalone/draksambashare:146
#, c-format
msgid "Force create group"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid "About Draksambashare"
msgstr ""

#: standalone/draksambashare:166
#, c-format
msgid ""
"Mandriva Linux \n"
"Release: %s\n"
"Author: Antoine Ginies\n"
"\n"
"This is a simple tool to easily manage Samba configuration."
msgstr ""

#: standalone/draksambashare:186
#, fuzzy, c-format
msgid "Samba server"
msgstr "삼바 서비스"

#: standalone/draksambashare:186
#, c-format
msgid "Restarting/Reloading Samba server..."
msgstr ""

#: standalone/draksambashare:187
#, c-format
msgid "Error Restarting/Reloading Samba server"
msgstr ""

#: standalone/draksambashare:373
#, c-format
msgid "Add a Samba share"
msgstr ""

#: standalone/draksambashare:376
#, c-format
msgid "Goal of this wizard is to easily create a new Samba share."
msgstr ""

#: standalone/draksambashare:378
#, fuzzy, c-format
msgid "Name of the share:"
msgstr "프린터 이름"

#: standalone/draksambashare:379 standalone/draksambashare:593
#: standalone/draksambashare:774
#, c-format
msgid "Comment:"
msgstr "주석:"

#: standalone/draksambashare:380
#, c-format
msgid "Path:"
msgstr "경로:"

#: standalone/draksambashare:385
#, c-format
msgid ""
"Share with the same name already exist or share name empty, please choose "
"another name."
msgstr ""

#: standalone/draksambashare:389 standalone/draksambashare:395
#, c-format
msgid "Can't create the directory, please enter a correct path."
msgstr ""

#: standalone/draksambashare:392 standalone/draksambashare:629
#: standalone/draksambashare:796
#, fuzzy, c-format
msgid "Please enter a Comment for this share."
msgstr "호스트 이름 또는 IP를 입력하세요."

#: standalone/draksambashare:423
#, c-format
msgid ""
"The wizard successfully added the Samba share. Now just double click on it "
"in treeview to modify it"
msgstr ""

#: standalone/draksambashare:439
#, c-format
msgid "pdf-gen - a PDF generator"
msgstr ""

#: standalone/draksambashare:440
#, c-format
msgid "printers - all printers available"
msgstr ""

#: standalone/draksambashare:444
#, c-format
msgid "Add Special Printer share"
msgstr ""

#: standalone/draksambashare:447
#, c-format
msgid ""
"Goal of this wizard is to easily create a new special printer Samba share."
msgstr ""

#: standalone/draksambashare:455
#, c-format
msgid "A PDF generator already exists."
msgstr ""

#: standalone/draksambashare:479
#, c-format
msgid "Printers and print$ already exist."
msgstr ""

#: standalone/draksambashare:530
#, c-format
msgid "The wizard successfully added the printer Samba share"
msgstr ""

#: standalone/draksambashare:553
#, c-format
msgid "Please add or select a Samba printer share to be able to modify it."
msgstr ""

#: standalone/draksambashare:589
#, c-format
msgid "Printer share"
msgstr ""

#: standalone/draksambashare:592
#, c-format
msgid "Printer name:"
msgstr "프린터 이름:"

#: standalone/draksambashare:598 standalone/draksambashare:779
#, fuzzy, c-format
msgid "Writable:"
msgstr "쓰기"

#: standalone/draksambashare:599 standalone/draksambashare:780
#, fuzzy, c-format
msgid "Browseable:"
msgstr "찾아보기"

#: standalone/draksambashare:604
#, c-format
msgid "Advanced options"
msgstr ""

#: standalone/draksambashare:606
#, c-format
msgid "Printer access"
msgstr ""

#: standalone/draksambashare:610
#, c-format
msgid "Guest ok:"
msgstr ""

#: standalone/draksambashare:611
#, c-format
msgid "Create mode:"
msgstr ""

#: standalone/draksambashare:615
#, c-format
msgid "Printer command"
msgstr ""

#: standalone/draksambashare:617
#, c-format
msgid "Print command:"
msgstr ""

#: standalone/draksambashare:618
#, c-format
msgid "LPQ command:"
msgstr ""

#: standalone/draksambashare:619
#, c-format
msgid "Printing:"
msgstr ""

#: standalone/draksambashare:635
#, c-format
msgid "create mode should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:697
#, c-format
msgid "DrakSamba entry"
msgstr ""

#: standalone/draksambashare:702
#, c-format
msgid "Please add or select a Samba share to be able to modify it."
msgstr ""

#: standalone/draksambashare:725
#, fuzzy, c-format
msgid "Samba user access"
msgstr "삼바 서비스"

#: standalone/draksambashare:733
#, fuzzy, c-format
msgid "Mask options"
msgstr "DrakSec 기본 옵션"

#: standalone/draksambashare:747
#, fuzzy, c-format
msgid "Display options"
msgstr "옵션 지정"

#: standalone/draksambashare:769
#, fuzzy, c-format
msgid "Samba share directory"
msgstr "디렉토리가 아닙니다"

#: standalone/draksambashare:772
#, fuzzy, c-format
msgid "Share name:"
msgstr "공유 이름"

#: standalone/draksambashare:778
#, c-format
msgid "Public:"
msgstr ""

#: standalone/draksambashare:802
#, c-format
msgid ""
"Create mask, create mode and directory mask should be numeric. ie: 0755."
msgstr ""

#: standalone/draksambashare:809
#, c-format
msgid "Please create this Samba user: %s"
msgstr ""

#: standalone/draksambashare:932
#, c-format
msgid "User information"
msgstr ""

#: standalone/draksambashare:934
#, c-format
msgid "User name:"
msgstr ""

#: standalone/draksambashare:935 standalone/harddrake2:564
#, c-format
msgid "Password:"
msgstr "열쇠글:"

#: standalone/draksambashare:1135
#, c-format
msgid "Failed to add Samba share."
msgstr ""

#: standalone/draksambashare:1144
#, c-format
msgid "Failed to Modify Samba share."
msgstr ""

#: standalone/draksambashare:1153
#, c-format
msgid "Failed to remove a Samba share."
msgstr ""

#: standalone/draksambashare:1160
#, c-format
msgid "File share"
msgstr ""

#: standalone/draksambashare:1168
#, c-format
msgid "Add printers"
msgstr ""

#: standalone/draksambashare:1174
#, c-format
msgid "Failed to add printers."
msgstr ""

#: standalone/draksambashare:1183
#, c-format
msgid "Failed to Modify."
msgstr ""

#: standalone/draksambashare:1192
#, c-format
msgid "Failed to remove."
msgstr ""

#: standalone/draksambashare:1199
#, c-format
msgid "Printers"
msgstr "프린터"

#: standalone/draksambashare:1207
#, c-format
msgid "Change password"
msgstr ""

#: standalone/draksambashare:1212
#, c-format
msgid "Failed to change user password."
msgstr ""

#: standalone/draksambashare:1220
#, c-format
msgid "Failed to add user."
msgstr ""

#: standalone/draksambashare:1223
#, c-format
msgid "Delete user"
msgstr ""

#: standalone/draksambashare:1232
#, c-format
msgid "Failed to delete user."
msgstr ""

#: standalone/draksambashare:1244
#, c-format
msgid "Samba Users"
msgstr ""

#: standalone/draksambashare:1253
#, c-format
msgid "DrakSamba manage Samba shares"
msgstr ""

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr "모두"

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "없음"

#: standalone/draksec:53 standalone/net_applet:476
#, c-format
msgid "Ignore"
msgstr "무시"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:103
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:156 standalone/harddrake2:208
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: standalone/draksec:170
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr " (기본값)"

#: standalone/draksec:212
#, c-format
msgid "Security Level:"
msgstr "보안 등급 :"

#: standalone/draksec:219
#, fuzzy, c-format
msgid "Security Administrator:"
msgstr "보안 관리자 (로그인 또는 이메일)"

#: standalone/draksec:221
#, fuzzy, c-format
msgid "Basic options"
msgstr "DrakSec 기본 옵션"

#: standalone/draksec:235
#, fuzzy, c-format
msgid "Network Options"
msgstr "추가 옵션"

#: standalone/draksec:235
#, fuzzy, c-format
msgid "System Options"
msgstr "추가 옵션"

#: standalone/draksec:270
#, c-format
msgid "Periodic Checks"
msgstr ""

#: standalone/draksec:300
#, fuzzy, c-format
msgid "Please wait, setting security level..."
msgstr "희망하는 보안 단계를 선택해 주세요."

#: standalone/draksec:306
#, fuzzy, c-format
msgid "Please wait, setting security options..."
msgstr "설치 준비중입니다. 잠시 기다리세요."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "사운드카드를 찾을 수 없습니다!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""

#: standalone/draksplash:30
#, c-format
msgid "x coordinate of text box"
msgstr ""

#: standalone/draksplash:31
#, c-format
msgid "y coordinate of text box"
msgstr ""

#: standalone/draksplash:32
#, c-format
msgid "text box width"
msgstr ""

#: standalone/draksplash:33
#, c-format
msgid "text box height"
msgstr ""

#: standalone/draksplash:34
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:35
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: standalone/draksplash:36
#, c-format
msgid "the width of the progress bar"
msgstr ""

#: standalone/draksplash:37
#, c-format
msgid "the height of the progress bar"
msgstr ""

#: standalone/draksplash:38
#, c-format
msgid "x coordinate of the text"
msgstr ""

#: standalone/draksplash:39
#, c-format
msgid "y coordinate of the text"
msgstr ""

#: standalone/draksplash:40
#, c-format
msgid "text box transparency"
msgstr ""

#: standalone/draksplash:41
#, c-format
msgid "progress box transparency"
msgstr ""

#: standalone/draksplash:42
#, c-format
msgid "text size"
msgstr ""

#: standalone/draksplash:59
#, c-format
msgid "Choose progress bar color 1"
msgstr ""

#: standalone/draksplash:60
#, c-format
msgid "Choose progress bar color 2"
msgstr ""

#: standalone/draksplash:61
#, c-format
msgid "Choose progress bar background"
msgstr ""

#: standalone/draksplash:62
#, c-format
msgid "Gradient type"
msgstr ""

#: standalone/draksplash:63
#, c-format
msgid "Choose text color"
msgstr ""

#: standalone/draksplash:65 standalone/draksplash:72
#, c-format
msgid "Choose picture"
msgstr ""

#: standalone/draksplash:66
#, c-format
msgid "Silent bootsplash"
msgstr ""

#: standalone/draksplash:69
#, c-format
msgid "Choose text zone color"
msgstr ""

#: standalone/draksplash:70
#, c-format
msgid "Text color"
msgstr ""

#: standalone/draksplash:71
#, c-format
msgid "Background color"
msgstr ""

#: standalone/draksplash:73
#, c-format
msgid "Verbose bootsplash"
msgstr ""

#: standalone/draksplash:75
#, c-format
msgid "Display logo on Console"
msgstr "콘솔하상에 로고 보이기"

#: standalone/draksplash:78
#, c-format
msgid "Console bootsplash"
msgstr ""

#: standalone/draksplash:84
#, c-format
msgid "Theme name"
msgstr "테마 이름"

#: standalone/draksplash:87
#, c-format
msgid "final resolution"
msgstr "최종 해상도"

#: standalone/draksplash:92
#, c-format
msgid "Save theme"
msgstr "테마 저장"

#: standalone/draksplash:153
#, c-format
msgid "saving Bootsplash theme..."
msgstr ""

#: standalone/draksplash:162
#, c-format
msgid "Unable to load image file %s"
msgstr ""

#: standalone/draksplash:173
#, fuzzy, c-format
msgid "choose image"
msgstr "이미지 파일 선택"

#: standalone/draksplash:188
#, c-format
msgid "Color selection"
msgstr ""

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "항목 추가"

#: standalone/drakups:83
#, fuzzy, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"메일 설정 도구에 잘 오셨습니다.\n"
"\n"
"여기서 경고 시스템을 설정할 수 있습니다.\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""

#: standalone/drakups:93
#, fuzzy, c-format
msgid "Autodetection"
msgstr "자동 검색"

#: standalone/drakups:101 standalone/harddrake2:356
#, c-format
msgid "Detection in progress"
msgstr "검색 진행 중"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "프린터를 찾을 수 없습니다!"

#: standalone/drakups:128 standalone/drakups:140
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "OKI 윈프린터 설정"

#: standalone/drakups:128
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "마우스를 테스트하세요."

#: standalone/drakups:129
#, fuzzy, c-format
msgid "Manufacturer / Model:"
msgstr "프린터 제조업체, 모델"

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "이름:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr ""

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "포트:"

#: standalone/drakups:149
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?"

#: standalone/drakups:159
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:250
#, fuzzy, c-format
msgid "UPS devices"
msgstr "서비스"

#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "이름"

#: standalone/drakups:269
#, fuzzy, c-format
msgid "UPS users"
msgstr "사용자들"

#: standalone/drakups:285
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "네트웍 도구 액세스"

#: standalone/drakups:286
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:298
#, c-format
msgid "Rules"
msgstr "규칙"

#: standalone/drakups:299
#, c-format
msgid "Action"
msgstr "동작"

#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "레벨"

#: standalone/drakups:299
#, fuzzy, c-format
msgid "ACL name"
msgstr "LVM 이름?"

#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
#, fuzzy, c-format
msgid "DrakUPS"
msgstr "드보락(US)"

#: standalone/drakups:339
#, fuzzy, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "설정 테스트"

#: standalone/drakvpn:73
#, fuzzy, c-format
msgid "DrakVPN"
msgstr "드보락(US)"

#: standalone/drakvpn:95
#, fuzzy, c-format
msgid "The VPN connection is enabled."
msgstr "이제 인터넷 연결 공유가 허용되었습니다."

#: standalone/drakvpn:96
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"인터넷 연결공유 설정은 이미 완료되었습니다.\n"
"현재 가능한 상태입니다.\n"
"\n"
"무슨 작업을 하시겠습니까?"

#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "해제"

#: standalone/drakvpn:101 standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "재설정"

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr "취소"

#: standalone/drakvpn:105
#, fuzzy, c-format
msgid "Disabling VPN..."
msgstr "서버 중지 중..."

#: standalone/drakvpn:114
#, fuzzy, c-format
msgid "The VPN connection is now disabled."
msgstr "이제 인터넷 연결 공유가 금지되었습니다."

#: standalone/drakvpn:121
#, fuzzy, c-format
msgid "VPN connection currently disabled"
msgstr "현재 인터넷 연결 공유가 불가능한 상태입니다."

#: standalone/drakvpn:122
#, fuzzy, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"인터넷 연결공유 설정은 이미 완료되었습니다.\n"
"현재 불가능한 상태입니다.\n"
"\n"
"무슨 작업을 하시겠습니까?"

#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "허용"

#: standalone/drakvpn:135
#, fuzzy, c-format
msgid "Enabling VPN..."
msgstr "서버 허용 중"

#: standalone/drakvpn:141
#, fuzzy, c-format
msgid "The VPN connection is now enabled."
msgstr "이제 인터넷 연결 공유가 허용되었습니다."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr ""

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, fuzzy, c-format
msgid "Kernel module."
msgstr "모듈 제거"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr "팩키지 설치중 문제 발생 %s"

#: standalone/drakvpn:278
#, fuzzy, c-format
msgid "Security Policies"
msgstr "보안 수준"

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:281 standalone/drakvpn:292
#, fuzzy, c-format
msgid "Configuration file"
msgstr "설정"

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:311 standalone/drakvpn:671
#, fuzzy, c-format
msgid "%s entries"
msgstr ", %s 섹터"

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:319 standalone/drakvpn:680
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "매일"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Commit"
msgstr "적용"

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, fuzzy, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "LAN 설정"

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "config setup"
msgstr "재설정"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "conn %default"
msgstr "기본값"

#: standalone/drakvpn:362
#, fuzzy, c-format
msgid "normal conn"
msgstr "일반 모드"

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, fuzzy, c-format
msgid "Exists!"
msgstr "종료"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:391
#, fuzzy, c-format
msgid "interfaces"
msgstr "인터페이스"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:394
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:437
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:439
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "[왼쪽]"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:477
#, fuzzy, c-format
msgid "section name"
msgstr "연결 이름"

#: standalone/drakvpn:478
#, fuzzy, c-format
msgid "authby"
msgstr "경로"

#: standalone/drakvpn:479
#, c-format
msgid "auto"
msgstr "자동"

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr "[오른쪽]"

#: standalone/drakvpn:486
#, fuzzy, c-format
msgid "rightcert"
msgstr "더 높음"

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:562 standalone/drakvpn:812
#, fuzzy, c-format
msgid "Edit section"
msgstr "경로 선택"

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, fuzzy, c-format
msgid "Section names"
msgstr "연결 이름"

#: standalone/drakvpn:576
#, fuzzy, c-format
msgid "Can not edit!"
msgstr "%s를 열 수 없습니다: %s\n"

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:642 standalone/drakvpn:859
#, fuzzy, c-format
msgid "Remove section"
msgstr "제거 목록"

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:721
#, c-format
msgid "path"
msgstr "경로"

#: standalone/drakvpn:721
#, c-format
msgid "remote"
msgstr "원격"

#: standalone/drakvpn:721
#, fuzzy, c-format
msgid "sainfo"
msgstr "정보"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:732
#, fuzzy, c-format
msgid "path type"
msgstr "유형 변경"

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:756 standalone/drakvpn:849
#, fuzzy, c-format
msgid "real file"
msgstr "파일을 선택하세요."

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:927
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "유럽 프로토콜"

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:960
#, fuzzy, c-format
msgid "Sainfo destination protocol"
msgstr "윈도우즈 이주 도구"

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:982
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "번호"

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""

#: standalone/drakvpn:1019
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "사용자 인증"

#: standalone/drakvpn:1021
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1022
#, fuzzy, c-format
msgid "deflate"
msgstr "기본값"

#: standalone/drakvpn:1029
#, c-format
msgid "Remote"
msgstr "원격"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1038
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "다이얼링 모드"

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1046
#, fuzzy, c-format
msgid "Generate policy"
msgstr "보안"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr "끄기"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "on"
msgstr "요일"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1062
#, fuzzy, c-format
msgid "Passive"
msgstr "경로 선택"

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1067
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1069
#, fuzzy, c-format
msgid "My certfile"
msgstr "파일을 선택하세요."

#: standalone/drakvpn:1070
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "프린터 이름"

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr ""

#: standalone/drakvpn:1072
#, fuzzy, c-format
msgid "Name of the private key"
msgstr "프린터 이름"

#: standalone/drakvpn:1073
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "파일을 선택하세요."

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1075
#, fuzzy, c-format
msgid "Verify cert"
msgstr "훌륭한 팩키지"

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1100
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "프린터"

#: standalone/drakvpn:1101
#, fuzzy, c-format
msgid "Proposal"
msgstr "프로토콜"

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1112
#, fuzzy, c-format
msgid "DH group"
msgstr "그룹"

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "명령"

#: standalone/drakvpn:1120
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1122
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "유럽 프로토콜"

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, fuzzy, c-format
msgid "any"
msgstr "하루씩"

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "깃발"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr "방향"

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "ipsec"
msgstr "기타"

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "discard"
msgstr "해제"

#: standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr "모드"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "tunnel"
msgstr "채널"

#: standalone/drakvpn:1129
#, fuzzy, c-format
msgid "transport"
msgstr "기타 포트"

#: standalone/drakvpn:1131
#, fuzzy, c-format
msgid "Source/destination"
msgstr "워크스테이션"

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr "기본값"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "use"
msgstr "마우스"

#: standalone/drakvpn:1132
#, fuzzy, c-format
msgid "unique"
msgstr "유월"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "미국 (공중파)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "미국 (케이블)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr "미국 (케이블-HRC)"

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "캐나다 (케이블)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "일본 (공중파)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "일본 (케이블)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "중국 (공중파)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "서유럽"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "동유럽"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "프랑스 [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "뉴질랜드"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr ""

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"TV 노옴과 국가를\n"
"입력하세요."

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr "TV 놈 :"

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "지역 :"

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr "TV 채널 검색 진행 중..."

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr "TV 채널 검색 중..."

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "TV 채널을 찾는 과정에서 오류가 있었습니다."

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "즐거운 하루를!"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "이제 [xawtv]를 (X윈도우 하에서) 사용할 수 있습니다!\n"

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr "TV 카드를 찾을 수 없습니다!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""

#: standalone/harddrake2:25
#, c-format
msgid "Alternative drivers"
msgstr "대체 드라이버들"

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: standalone/harddrake2:31 standalone/harddrake2:146
#, c-format
msgid "Bus identification"
msgstr "버스 아이디"

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:39
#, fuzzy, c-format
msgid "this field describes the device"
msgstr "이 필드는 장치를 설명합니다."

#: standalone/harddrake2:40
#, c-format
msgid "Old device file"
msgstr "오래된 장치 파일"

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr ""

#: standalone/harddrake2:42
#, c-format
msgid "New devfs device"
msgstr "새로운 devfs 장치"

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr ""

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "모듈"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "Extended partitions"
msgstr "새 파티션 만들기"

#: standalone/harddrake2:47
#, fuzzy, c-format
msgid "the number of extended partitions"
msgstr "새 파티션으로 파일 옴기기"

#: standalone/harddrake2:48
#, fuzzy, c-format
msgid "Geometry"
msgstr "복구"

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "Disk controller"
msgstr ""

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr "하드웨어 장치 범주"

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:224
#, c-format
msgid "Model"
msgstr "모델"

#: standalone/harddrake2:51
#, c-format
msgid "hard disk model"
msgstr "하드 디스크 모델"

#: standalone/harddrake2:52
#, fuzzy, c-format
msgid "network printer port"
msgstr "네트웍 프린터 (소켓)"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "Primary partitions"
msgstr "파티션 포맷"

#: standalone/harddrake2:53
#, fuzzy, c-format
msgid "the number of the primary partitions"
msgstr "부트 파티션의 첫번째 섹터"

#: standalone/harddrake2:54
#, c-format
msgid "the vendor name of the device"
msgstr ""

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr ""

#: standalone/harddrake2:55
#, fuzzy, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device #"
msgstr "서비스"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "PCI device number"
msgstr "번호"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "PCI function number"
msgstr "연결 이름"

#: standalone/harddrake2:58
#, fuzzy, c-format
msgid "Vendor ID"
msgstr "상표"

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "Device ID"
msgstr "장치: "

#: standalone/harddrake2:59
#, c-format
msgid "this is the numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:61
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "서비스"

#: standalone/harddrake2:61
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr ""

#: standalone/harddrake2:62
#, fuzzy, c-format
msgid "Device USB ID"
msgstr "장치: "

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr ""

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:67
#, fuzzy, c-format
msgid "Cache size"
msgstr "크기"

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr ""

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: standalone/harddrake2:72
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "보안 수준"

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr "프래그"

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr ""

#: standalone/harddrake2:84
#, fuzzy, c-format
msgid "Model name"
msgstr "모듈 이름"

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr ""

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "Processor ID"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr ""

#: standalone/harddrake2:87
#, fuzzy, c-format
msgid "Model stepping"
msgstr "설정 읽기"

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr ""

#: standalone/harddrake2:89
#, fuzzy, c-format
msgid "Write protection"
msgstr "프린터 자동 검색"

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:93
#, fuzzy, c-format
msgid "Floppy format"
msgstr "포맷"

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:97
#, c-format
msgid "Channel"
msgstr "채널"

#: standalone/harddrake2:97
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI 채널"

#: standalone/harddrake2:98
#, fuzzy, c-format
msgid "Disk identifier"
msgstr "프린터"

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:99
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "지역 파일들"

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, fuzzy, c-format
msgid "Installed size"
msgstr "시스템 설치"

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:107
#, fuzzy, c-format
msgid "Enabled Size"
msgstr "허용"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, fuzzy, c-format
msgid "type of the memory device"
msgstr "프린터 이름"

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr "속도"

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:110
#, fuzzy, c-format
msgid "Bank connections"
msgstr "캐이블 연결"

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:115
#, fuzzy, c-format
msgid "Device file"
msgstr "오래된 장치 파일"

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr ""

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr ""

#: standalone/harddrake2:116
#, fuzzy, c-format
msgid "whether the wheel is emulated or not"
msgstr "버튼 에뮬레이션"

#: standalone/harddrake2:117
#, fuzzy, c-format
msgid "the type of the mouse"
msgstr "마우스를 테스트하세요."

#: standalone/harddrake2:118
#, fuzzy, c-format
msgid "the name of the mouse"
msgstr "버튼 수"

#: standalone/harddrake2:119
#, c-format
msgid "Number of buttons"
msgstr "버튼 수"

#: standalone/harddrake2:119
#, fuzzy, c-format
msgid "the number of buttons the mouse has"
msgstr "버튼 수"

#: standalone/harddrake2:120
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "어떤 시리얼 포트에 마우스가 연결되어 있나요?"

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:322
#, c-format
msgid "Identification"
msgstr "확인"

#: standalone/harddrake2:129 standalone/harddrake2:145
#, c-format
msgid "Connection"
msgstr "연결"

#: standalone/harddrake2:138
#, fuzzy, c-format
msgid "Performances"
msgstr "사용자 정의"

#: standalone/harddrake2:139
#, fuzzy, c-format
msgid "Bugs"
msgstr "버스"

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr ""

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "장치"

#: standalone/harddrake2:148
#, c-format
msgid "Partitions"
msgstr "분할영역"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr "기능"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:146 standalone/printerdrake:159
#: standalone/printerdrake:171
#, c-format
msgid "/_Options"
msgstr "/옵션(_O)"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:172 standalone/printerdrake:174
#: standalone/printerdrake:177 standalone/printerdrake:179
#, c-format
msgid "/_Help"
msgstr "/도움말(_H)"

#: standalone/harddrake2:181
#, fuzzy, c-format
msgid "/Autodetect _printers"
msgstr "자동 검색됨"

#: standalone/harddrake2:182
#, fuzzy, c-format
msgid "/Autodetect _modems"
msgstr "자동 검색됨"

#: standalone/harddrake2:183
#, fuzzy, c-format
msgid "/Autodetect _jaz drives"
msgstr "자동 검색됨"

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr ""

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:192 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/종료(_Q)"

#: standalone/harddrake2:205
#, fuzzy, c-format
msgid "/_Fields description"
msgstr "설명"

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr "하드 드레이크 도움말"

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:222 standalone/printerdrake:177
#, c-format
msgid "/_Report Bug"
msgstr "/버그 보고(_R)"

#: standalone/harddrake2:224 standalone/printerdrake:179
#, c-format
msgid "/_About..."
msgstr "/정보(_A)..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr "하드 드레이크 정보"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""

#: standalone/harddrake2:242
#, fuzzy, c-format
msgid "Harddrake2"
msgstr "하드 드레이크"

#: standalone/harddrake2:253
#, c-format
msgid "Detected hardware"
msgstr "검색된 하드웨어"

#: standalone/harddrake2:258
#, c-format
msgid "Configure module"
msgstr "모듈 설정"

#: standalone/harddrake2:265
#, c-format
msgid "Run config tool"
msgstr "설정 도구 실행"

#: standalone/harddrake2:289
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:310 standalone/printerdrake:306
#: standalone/printerdrake:320
#, c-format
msgid "Unknown"
msgstr "알 수 없음"

#: standalone/harddrake2:330
#, c-format
msgid "Misc"
msgstr "기타"

#: standalone/harddrake2:406
#, c-format
msgid "secondary"
msgstr "두번째"

#: standalone/harddrake2:406
#, c-format
msgid "primary"
msgstr "주"

#: standalone/harddrake2:410
#, fuzzy, c-format
msgid "burner"
msgstr "프린터"

#: standalone/harddrake2:410
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:558 standalone/harddrake2:561
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:563
#, c-format
msgid "Account:"
msgstr "어카운트:"

#: standalone/harddrake2:565
#, c-format
msgid "Hostname:"
msgstr "호스트명:"

#: standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "키보드 레이아웃 선택"

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "콘솔에서 백스페이스 키가 지우기를 하도록 하시겠습니까?"

#: standalone/localedrake:38
#, fuzzy, c-format
msgid "LocaleDrake"
msgstr "지역 파일들"

#: standalone/localedrake:44
#, fuzzy, c-format
msgid "You should install the following packages: %s"
msgstr "%s 팩키지 설치중"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: standalone/localedrake:47 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: standalone/localedrake:55
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "변경이 완료 되었지만, 적용되기 위해서는 재로그인해야 합니다."

#: standalone/logdrake:49
#, fuzzy, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "맨드리바 도구 설명"

#: standalone/logdrake:50
#, fuzzy, c-format
msgid "Logdrake"
msgstr "로그드레이크"

#: standalone/logdrake:63
#, c-format
msgid "Show only for the selected day"
msgstr "선택된 날짜에 대해만 보이기"

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr "/파일(F)/새로 만들기(_N)"

#: standalone/logdrake:70
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr "/파일(F)/열기(_O)"

#: standalone/logdrake:71
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr "/파일(F)/저장(_S)"

#: standalone/logdrake:72
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr "/파일(F)/다른 이름으로 저장(_A)"

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/파일(F)/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr "/옵션(O)/테스트"

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/도움말(H)/이 프로그램은(_A)..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:115
#, c-format
msgid "search"
msgstr "검색"

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr "로그 분석 도구"

#: standalone/logdrake:128 standalone/net_applet:343 standalone/net_monitor:93
#, c-format
msgid "Settings"
msgstr "설정값"

#: standalone/logdrake:133
#, fuzzy, c-format
msgid "Matching"
msgstr "찾을 문자열"

#: standalone/logdrake:134
#, c-format
msgid "but not matching"
msgstr "제외할 문자열"

#: standalone/logdrake:138
#, c-format
msgid "Choose file"
msgstr "파일 선택"

#: standalone/logdrake:150
#, c-format
msgid "Calendar"
msgstr "달력"

#: standalone/logdrake:160
#, c-format
msgid "Content of the file"
msgstr "파일 내용"

#: standalone/logdrake:164 standalone/logdrake:402
#, c-format
msgid "Mail alert"
msgstr "메일 경고"

#: standalone/logdrake:171
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr ""

#: standalone/logdrake:224
#, c-format
msgid "please wait, parsing file: %s"
msgstr "기다려 주세요. 파일 분석 중: %s"

#: standalone/logdrake:379
#, c-format
msgid "Apache World Wide Web Server"
msgstr "아파치 월드와이드웹 서버"

#: standalone/logdrake:380
#, c-format
msgid "Domain Name Resolver"
msgstr "도메인 네임 해결사"

#: standalone/logdrake:381
#, c-format
msgid "Ftp Server"
msgstr "FTP 서버"

#: standalone/logdrake:382
#, c-format
msgid "Postfix Mail Server"
msgstr "포스트픽스 메일 서버"

#: standalone/logdrake:383
#, c-format
msgid "Samba Server"
msgstr "삼바 서비스"

#: standalone/logdrake:385
#, c-format
msgid "Webmin Service"
msgstr "웹민 서비스"

#: standalone/logdrake:386
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd 서비스"

#: standalone/logdrake:397
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "인쇄시스템 변경"

#: standalone/logdrake:398
#, c-format
msgid "Stop the mail alert system"
msgstr ""

#: standalone/logdrake:405
#, c-format
msgid "Mail alert configuration"
msgstr "메일 경고 설정"

#: standalone/logdrake:406
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"메일 설정 도구에 잘 오셨습니다.\n"
"\n"
"여기서 경고 시스템을 설정할 수 있습니다.\n"

#: standalone/logdrake:416
#, fuzzy, c-format
msgid "Services settings"
msgstr "서비스 설정"

#: standalone/logdrake:417
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""

#: standalone/logdrake:424
#, fuzzy, c-format
msgid "Load setting"
msgstr "설정 읽기"

#: standalone/logdrake:425
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: standalone/logdrake:426
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:431
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "경고 설정"

#: standalone/logdrake:432
#, c-format
msgid "Please enter your email address below "
msgstr "아래에 이메일 주소를 입력하세요."

#: standalone/logdrake:433
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""

#: standalone/logdrake:452
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:458
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:517
#, c-format
msgid "Save as.."
msgstr "새 이름으로 저장"

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "어떤 종류의 마우스를 사용하십니까?"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "3버튼 에뮬레이트?"

#: standalone/mousedrake:61
#, fuzzy, c-format
msgid "Mouse test"
msgstr "마우스 시스템"

#: standalone/mousedrake:64
#, fuzzy, c-format
msgid "Please test your mouse:"
msgstr "마우스를 테스트하세요."

#: standalone/net_applet:47
#, fuzzy, c-format
msgid "Network is up on interface %s"
msgstr "네트웍 인터페이스"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, fuzzy, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "네트웍 기능이 설정되지 않았습니다."

#: standalone/net_applet:56 standalone/net_applet:76
#: standalone/net_monitor:468
#, fuzzy, c-format
msgid "Connect %s"
msgstr "연결"

#: standalone/net_applet:57 standalone/net_applet:76
#: standalone/net_monitor:468
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "연결 끊기"

#: standalone/net_applet:58
#, fuzzy, c-format
msgid "Monitor Network"
msgstr "네트웍을 통한 복구"

#: standalone/net_applet:60
#, c-format
msgid "Manage wireless networks"
msgstr ""

#: standalone/net_applet:61
#, c-format
msgid "Configure Network"
msgstr "네트웍 설정"

#: standalone/net_applet:63
#, fuzzy, c-format
msgid "Watched interface"
msgstr "인터페이스"

#: standalone/net_applet:93
#, c-format
msgid "Profiles"
msgstr "프로파일"

#: standalone/net_applet:102
#, c-format
msgid "Get Online Help"
msgstr ""

#: standalone/net_applet:331
#, c-format
msgid "Interactive Firewall automatic mode"
msgstr ""

#: standalone/net_applet:336
#, c-format
msgid "Always launch on startup"
msgstr ""

#: standalone/net_applet:340
#, fuzzy, c-format
msgid "Wireless networks"
msgstr "무선 연결"

#: standalone/net_applet:425
#, fuzzy, c-format
msgid "Interactive Firewall: intrusion detected"
msgstr "방화벽 설정이 감지되었습니다!"

#: standalone/net_applet:438
#, fuzzy, c-format
msgid "What do you want to do with this attacker?"
msgstr "게임을 계속할까요?"

#: standalone/net_applet:441