# KTranslator Generated File
# KTranslator Generated File
# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2000 Free Software Foundation, Inc.
# Schalk W. Cronj� <schalkc@ntaba.co.za>, 2000
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2002-12-05 19:52+0100\n"
"PO-Revision-Date: 2001-08-20 21:28-0000\n"
"Last-Translator: Schalk W. Cronj� <schalkc@uk.ntaba.com>\n"
"Language-Team: Afrikaans <mandrake@af.org.za>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=iso-8859-1\n"
"Content-Transfer-Encoding: 8bit\n"

#: ../../Xconfig/card.pm_.c:16
msgid "256 kB"
msgstr "256 kB"

#: ../../Xconfig/card.pm_.c:17
msgid "512 kB"
msgstr "512 kB"

#: ../../Xconfig/card.pm_.c:18
msgid "1 MB"
msgstr "1 MB"

#: ../../Xconfig/card.pm_.c:19
msgid "2 MB"
msgstr "2 MB"

#: ../../Xconfig/card.pm_.c:20
msgid "4 MB"
msgstr "4 MB"

#: ../../Xconfig/card.pm_.c:21
msgid "8 MB"
msgstr "8 MB"

#: ../../Xconfig/card.pm_.c:22
msgid "16 MB"
msgstr "16 MB"

#: ../../Xconfig/card.pm_.c:23
msgid "32 MB"
msgstr "32 MB"

#: ../../Xconfig/card.pm_.c:24
msgid "64 MB or more"
msgstr "64MB of meer"

#: ../../Xconfig/card.pm_.c:203
msgid "Choose a X server"
msgstr "Kies 'n X-bediener"

#: ../../Xconfig/card.pm_.c:203
msgid "X server"
msgstr "X-bediener"

#: ../../Xconfig/card.pm_.c:230
msgid "Multi-head configuration"
msgstr "Multikopkonfigurasie"

#: ../../Xconfig/card.pm_.c:231
msgid ""
"Your system support multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"U stelsel onderstuen multikopkonfigurasie.\n"
"Wat wil u doen?"

#: ../../Xconfig/card.pm_.c:288
msgid "Select the memory size of your graphics card"
msgstr "Kies die geheue grootte van u videokaart"

#: ../../Xconfig/card.pm_.c:349
msgid "XFree configuration"
msgstr "XFree-konfigurasie"

#: ../../Xconfig/card.pm_.c:351
msgid "Which configuration of XFree do you want to have?"
msgstr "Watter tipe XFree-konfigurasie verlang u?"

#: ../../Xconfig/card.pm_.c:383
msgid "Configure all heads independently"
msgstr "Konfigureer skyfkoppe afsonderlik"

#: ../../Xconfig/card.pm_.c:384
msgid "Use Xinerama extension"
msgstr "Gebruik Xinerama-ekstensies"

#: ../../Xconfig/card.pm_.c:389
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Konfigureer net die \"%s\" kaart (%s)"

#: ../../Xconfig/card.pm_.c:401 ../../Xconfig/card.pm_.c:402
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: ../../Xconfig/card.pm_.c:413 ../../Xconfig/card.pm_.c:439
#: ../../Xconfig/various.pm_.c:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr "XFree %s met 3D-hardwareversnelling"

#: ../../Xconfig/card.pm_.c:416
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."

#: ../../Xconfig/card.pm_.c:418 ../../Xconfig/card.pm_.c:441
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""
"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."

#: ../../Xconfig/card.pm_.c:426 ../../Xconfig/card.pm_.c:447
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"

#: ../../Xconfig/card.pm_.c:429
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
"bied,\n"
"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."

#: ../../Xconfig/card.pm_.c:432 ../../Xconfig/card.pm_.c:449
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
"bied,\n"
"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."

#: ../../Xconfig/card.pm_.c:455
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installasievertoondrywer)"

#
#: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77
#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:961
msgid "Custom"
msgstr "Aangepaste"

#: ../../Xconfig/main.pm_.c:102
#, fuzzy
msgid "Graphic Card"
msgstr "Videokaart"

#: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93
msgid "Monitor"
msgstr "Monitor"

#: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:210
msgid "Resolution"
msgstr "Resolusie"

#: ../../Xconfig/main.pm_.c:113
msgid "Test"
msgstr ""

#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:67
#: ../../diskdrake/interactive.pm_.c:393 ../../diskdrake/removable.pm_.c:25
#: ../../diskdrake/smbnfs_gtk.pm_.c:86
msgid "Options"
msgstr "Opsies"

#: ../../Xconfig/main.pm_.c:122 ../../Xconfig/resolution_and_depth.pm_.c:269
#: ../../install_gtk.pm_.c:86 ../../install_steps_gtk.pm_.c:274
#: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142
#: ../../interactive.pm_.c:345 ../../interactive/http.pm_.c:104
#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159
#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 ../../security/main.pm_.c:181
#: ../../standalone/drakbackup_.c:3920 ../../standalone/drakbackup_.c:4015
#: ../../standalone/drakbackup_.c:4034 ../../ugtk2.pm_.c:435
#: ../../ugtk2.pm_.c:926 ../../ugtk2.pm_.c:949
msgid "Ok"
msgstr "OK"

#: ../../Xconfig/main.pm_.c:122 ../../diskdrake/dav.pm_.c:28
#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/draksplash_.c:114
#: ../../standalone/harddrake2_.c:152 ../../standalone/logdrake_.c:204
msgid "Quit"
msgstr "Verlaat"

#: ../../Xconfig/main.pm_.c:145
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Behou die veranderinge?\n"
"Huidige konfigurasie is:\n"
"\n"
"%s"

#: ../../Xconfig/monitor.pm_.c:93
msgid "Choose a monitor"
msgstr "Kies 'n monitor"

#: ../../Xconfig/monitor.pm_.c:97
msgid "Plug'n Play"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46
msgid "Generic"
msgstr "Generies"

#: ../../Xconfig/monitor.pm_.c:99 ../../standalone/harddrake2_.c:67
#: ../../standalone/harddrake2_.c:68
#, fuzzy
msgid "Vendor"
msgstr "Herroep"

#: ../../Xconfig/monitor.pm_.c:109
msgid "Plug'n Play probing failed. Please choose a precise monitor"
msgstr ""

#: ../../Xconfig/monitor.pm_.c:114
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
"belangrikste.\n"
"\n"
"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite di� van u\n"
"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
"kies konservatief."

#: ../../Xconfig/monitor.pm_.c:121
msgid "Horizontal refresh rate"
msgstr "Horisontale verfristempo"

#: ../../Xconfig/monitor.pm_.c:122
msgid "Vertical refresh rate"
msgstr "Vertikale verfristempo"

#: ../../Xconfig/resolution_and_depth.pm_.c:12
msgid "256 colors (8 bits)"
msgstr "256 kleure (8 bis)"

#: ../../Xconfig/resolution_and_depth.pm_.c:13
msgid "32 thousand colors (15 bits)"
msgstr "32-duisend kleure (15 bis)"

#: ../../Xconfig/resolution_and_depth.pm_.c:14
msgid "65 thousand colors (16 bits)"
msgstr "65-duisend kleure (16 bis)"

#: ../../Xconfig/resolution_and_depth.pm_.c:15
msgid "16 million colors (24 bits)"
msgstr "16-miljoen kleure (24 bis)"

#: ../../Xconfig/resolution_and_depth.pm_.c:16
msgid "4 billion colors (32 bits)"
msgstr "4 biljoen kleure (32 bis)"

#: ../../Xconfig/resolution_and_depth.pm_.c:130
msgid "Resolutions"
msgstr "Resolusies"

#: ../../Xconfig/resolution_and_depth.pm_.c:255
msgid "Choose the resolution and the color depth"
msgstr "Kies die resolusie en kleurdiepte"

#: ../../Xconfig/resolution_and_depth.pm_.c:256
#, c-format
msgid "Graphics card: %s"
msgstr "Videokaart: %s"

#: ../../Xconfig/resolution_and_depth.pm_.c:269 ../../any.pm_.c:1001
#: ../../bootlook.pm_.c:336 ../../diskdrake/smbnfs_gtk.pm_.c:87
#: ../../install_steps_gtk.pm_.c:405 ../../install_steps_gtk.pm_.c:463
#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:345
#: ../../interactive/http.pm_.c:105 ../../interactive/newt.pm_.c:194
#: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143
#: ../../my_gtk.pm_.c:158 ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287
#: ../../network/netconnect.pm_.c:39 ../../printer/printerdrake.pm_.c:2055
#: ../../security/main.pm_.c:228 ../../standalone/drakautoinst_.c:198
#: ../../standalone/drakbackup_.c:3874 ../../standalone/drakbackup_.c:3907
#: ../../standalone/drakbackup_.c:3933 ../../standalone/drakbackup_.c:3960
#: ../../standalone/drakbackup_.c:3987 ../../standalone/drakbackup_.c:4047
#: ../../standalone/drakbackup_.c:4074 ../../standalone/drakbackup_.c:4104
#: ../../standalone/drakbackup_.c:4130 ../../standalone/drakconnect_.c:112
#: ../../standalone/drakconnect_.c:144 ../../standalone/drakconnect_.c:286
#: ../../standalone/drakconnect_.c:534 ../../standalone/drakconnect_.c:677
#: ../../standalone/drakfloppy_.c:207 ../../standalone/drakfont_.c:918
#: ../../standalone/drakgw_.c:557 ../../standalone/logdrake_.c:204
#: ../../standalone/net_monitor_.c:337 ../../ugtk.pm_.c:295
#: ../../ugtk2.pm_.c:362 ../../ugtk2.pm_.c:434 ../../ugtk2.pm_.c:438
#: ../../ugtk2.pm_.c:926
msgid "Cancel"
msgstr "Kanselleer"

#: ../../Xconfig/test.pm_.c:29
msgid "Test of the configuration"
msgstr "Toets konfigurasie"

#: ../../Xconfig/test.pm_.c:30
msgid "Do you want to test the configuration?"
msgstr "Wil u die konfigurasie toets?"

#: ../../Xconfig/test.pm_.c:30
#, fuzzy
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"

#: ../../Xconfig/various.pm_.c:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Sleutelbord uitleg: %s\n"

#: ../../Xconfig/various.pm_.c:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Muistipe: %s\n"

#: ../../Xconfig/various.pm_.c:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Muistoestel: %s\n"

#: ../../Xconfig/various.pm_.c:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"

#: ../../Xconfig/various.pm_.c:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitor HoriSink: %s\n"

#: ../../Xconfig/various.pm_.c:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitor VertVerfris: %s\n"

#: ../../Xconfig/various.pm_.c:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Videokaart: %s\n"

#: ../../Xconfig/various.pm_.c:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Video geheue: %s kB\n"

#: ../../Xconfig/various.pm_.c:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Kleurdiepte: %s\n"

#: ../../Xconfig/various.pm_.c:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Resolusie: %s\n"

#: ../../Xconfig/various.pm_.c:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 bediener: %s\n"

#: ../../Xconfig/various.pm_.c:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86-drywer: %s\n"

#: ../../Xconfig/various.pm_.c:61
msgid "Graphical interface at startup"
msgstr "X met herlaai"

#: ../../Xconfig/various.pm_.c:62
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
"Wil u X begin met 'n herlaai?"

#: ../../Xconfig/various.pm_.c:73
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: ../../Xconfig/various.pm_.c:85
#, fuzzy
msgid "What norm is your TV using?"
msgstr "Watter tipe is u ISDN-konneksie?"

#: ../../any.pm_.c:107 ../../any.pm_.c:132
msgid "First sector of boot partition"
msgstr "Eerste sektor van herlaaipartisie"

#: ../../any.pm_.c:107 ../../any.pm_.c:132 ../../any.pm_.c:209
msgid "First sector of drive (MBR)"
msgstr "Eerste sektor van skyf (MBR)"

#: ../../any.pm_.c:111
msgid "SILO Installation"
msgstr "SILO installasie"

#: ../../any.pm_.c:112 ../../any.pm_.c:125
msgid "Where do you want to install the bootloader?"
msgstr "Waar wil u die herlaaistelsel installeer"

#: ../../any.pm_.c:124
msgid "LILO/grub Installation"
msgstr "LILO/grub installasie"

#: ../../any.pm_.c:136 ../../any.pm_.c:150
msgid "SILO"
msgstr "SILO"

#: ../../any.pm_.c:138
msgid "LILO with text menu"
msgstr "LILO met tekskieskaart"

#: ../../any.pm_.c:139 ../../any.pm_.c:150
msgid "LILO with graphical menu"
msgstr "LILO met grafiese kieskaart"

#: ../../any.pm_.c:142
msgid "Grub"
msgstr "Grub"

#: ../../any.pm_.c:146
msgid "Boot from DOS/Windows (loadlin)"
msgstr "Laai vauit DOS/Windows (loadlin)"

#: ../../any.pm_.c:148 ../../any.pm_.c:150
msgid "Yaboot"
msgstr "Yaboot"

#: ../../any.pm_.c:158 ../../any.pm_.c:189
msgid "Bootloader main options"
msgstr "Herlaaistelsel hoofopsies"

#: ../../any.pm_.c:159 ../../any.pm_.c:190
msgid "Bootloader to use"
msgstr "Herlaaistelsel om te gebruik"

#: ../../any.pm_.c:161
msgid "Bootloader installation"
msgstr "Herlaaiprogram installasie"

#: ../../any.pm_.c:163 ../../any.pm_.c:192
msgid "Boot device"
msgstr "Herlaaitoestel"

#: ../../any.pm_.c:164
msgid "Compact"
msgstr "Kompak"

#: ../../any.pm_.c:164
msgid "compact"
msgstr "kompak"

#: ../../any.pm_.c:165 ../../any.pm_.c:289
msgid "Video mode"
msgstr "Videomodus"

#: ../../any.pm_.c:167
msgid "Delay before booting default image"
msgstr "Wagperiode voro verstekstelsel gelaai word"

#: ../../any.pm_.c:169 ../../any.pm_.c:772
#: ../../diskdrake/smbnfs_gtk.pm_.c:179
#: ../../install_steps_interactive.pm_.c:1077 ../../network/modem.pm_.c:71
#: ../../printer/printerdrake.pm_.c:803 ../../printer/printerdrake.pm_.c:916
#: ../../standalone/drakbackup_.c:3478 ../../standalone/drakconnect_.c:622
#: ../../standalone/drakconnect_.c:647
msgid "Password"
msgstr "Wagwoord"

#: ../../any.pm_.c:170 ../../any.pm_.c:773
#: ../../install_steps_interactive.pm_.c:1078
msgid "Password (again)"
msgstr "Wagwoord (weer)"

#: ../../any.pm_.c:171
msgid "Restrict command line options"
msgstr "Beperk instruksielynopsies"

#: ../../any.pm_.c:171
msgid "restrict"
msgstr "beperk"

#: ../../any.pm_.c:173
msgid "Clean /tmp at each boot"
msgstr "Maak /tmp skoon met elke herlaai"

#: ../../any.pm_.c:174
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"

#: ../../any.pm_.c:176
msgid "Enable multi profiles"
msgstr "Gebruik multiprofiele"

#: ../../any.pm_.c:180
msgid "Give the ram size in MB"
msgstr "Gee die geheuegrootte in MB"

#: ../../any.pm_.c:182
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"

#: ../../any.pm_.c:183 ../../any.pm_.c:748
#: ../../diskdrake/interactive.pm_.c:1204
#: ../../install_steps_interactive.pm_.c:1072
msgid "Please try again"
msgstr "Probeer asb. weer"

#: ../../any.pm_.c:183 ../../any.pm_.c:748
#: ../../install_steps_interactive.pm_.c:1072
msgid "The passwords do not match"
msgstr "Die wagwoorde stem nie ooreen nie."

#: ../../any.pm_.c:191
msgid "Init Message"
msgstr "Beginboodskap"

#: ../../any.pm_.c:193
msgid "Open Firmware Delay"
msgstr ""

#: ../../any.pm_.c:194
msgid "Kernel Boot Timeout"
msgstr "Tydsbeperking vir stelselkernlaai"

#: ../../any.pm_.c:195
msgid "Enable CD Boot?"
msgstr "Laat CD-herlaai toe?"

#: ../../any.pm_.c:196
msgid "Enable OF Boot?"
msgstr "Laat OF-herlaai toe?"

#: ../../any.pm_.c:197
msgid "Default OS?"
msgstr "Verstek bedryfstelsel?"

#: ../../any.pm_.c:231
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""

#: ../../any.pm_.c:247
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can add some more or change the existing ones."
msgstr ""
"Hier is die huidige inskrywings\n"
"U kan byvoeg or verwyder soos nodig."

#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1531
#: ../../standalone/drakbackup_.c:1644 ../../standalone/drakfont_.c:953
#: ../../standalone/drakfont_.c:996
msgid "Add"
msgstr "Voeg by"

#: ../../any.pm_.c:257 ../../any.pm_.c:760 ../../diskdrake/dav.pm_.c:68
#: ../../diskdrake/hd_gtk.pm_.c:156 ../../diskdrake/removable.pm_.c:27
#: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153
#: ../../printer/printerdrake.pm_.c:2970 ../../standalone/drakbackup_.c:2726
msgid "Done"
msgstr "Klaar"

#: ../../any.pm_.c:257
msgid "Modify"
msgstr "Verander"

#: ../../any.pm_.c:265
msgid "Which type of entry do you want to add?"
msgstr "Watter tipe inskrywing wil u byvoeg?"

#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1674
msgid "Linux"
msgstr "Linux"

#: ../../any.pm_.c:266
msgid "Other OS (SunOS...)"
msgstr "Ander bedryfstelsel (SunOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (MacOS...)"
msgstr "Ander bedryfstelsel (MacOS...)"

#: ../../any.pm_.c:267
msgid "Other OS (windows...)"
msgstr "Ander bedryfstelsel (windows...)"

#: ../../any.pm_.c:285
msgid "Image"
msgstr "Beeld"

#: ../../any.pm_.c:286 ../../any.pm_.c:297
msgid "Root"
msgstr "Basis"

#: ../../any.pm_.c:287 ../../any.pm_.c:315
msgid "Append"
msgstr "Aanlas"

#: ../../any.pm_.c:291
msgid "Initrd"
msgstr "Initrd"

#: ../../any.pm_.c:292
msgid "Read-write"
msgstr "Lees-skryf"

#: ../../any.pm_.c:299
msgid "Table"
msgstr "Tabel"

#: ../../any.pm_.c:300
msgid "Unsafe"
msgstr "Onveilig"

#: ../../any.pm_.c:307 ../../any.pm_.c:312 ../../any.pm_.c:314
msgid "Label"
msgstr "Etiket"

#: ../../any.pm_.c:309 ../../any.pm_.c:319 ../../harddrake/v4l.pm_.c:215
msgid "Default"
msgstr "Verstek"

#: ../../any.pm_.c:316
msgid "Initrd-size"
msgstr "Initrd-grootte"

#: ../../any.pm_.c:318
msgid "NoVideo"
msgstr "Geen video"

#: ../../any.pm_.c:326
msgid "Remove entry"
msgstr "Verwyder inskrywing"

#: ../../any.pm_.c:329
msgid "Empty label not allowed"
msgstr "Le� etiket word nie toegelaat nie"

#: ../../any.pm_.c:330
msgid "You must specify a kernel image"
msgstr ""

#: ../../any.pm_.c:330
#, fuzzy
msgid "You must specify a root partition"
msgstr "U moet oor 'n ruilpartisie beskik"

#: ../../any.pm_.c:331
msgid "This label is already used"
msgstr "Hierdie etiket is alreeds in gebruik"

#: ../../any.pm_.c:640
#, c-format
msgid "Found %s %s interfaces"
msgstr "Het %s %s koppelvlakke gevind"

#: ../../any.pm_.c:641
msgid "Do you have another one?"
msgstr "Beskik u oor nog?"

#: ../../any.pm_.c:642
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Het u enige %s koppelvlakke?"

#: ../../any.pm_.c:644 ../../any.pm_.c:807 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286 ../../ugtk2.pm_.c:925
msgid "No"
msgstr "Nee"

#: ../../any.pm_.c:644 ../../any.pm_.c:806 ../../interactive.pm_.c:132
#: ../../my_gtk.pm_.c:286 ../../standalone/drakgw_.c:258
#: ../../standalone/drakgw_.c:259 ../../standalone/drakgw_.c:267
#: ../../standalone/drakgw_.c:277 ../../ugtk2.pm_.c:925
msgid "Yes"
msgstr "Ja"

#: ../../any.pm_.c:645
msgid "See hardware info"
msgstr "Sien hardeware inligting"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: ../../any.pm_.c:662
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Drywer vir %s kaart %s in installasieproses"

#: ../../any.pm_.c:663
#, c-format
msgid "(module %s)"
msgstr "(module %s)"

#: ../../any.pm_.c:674
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""

#: ../../any.pm_.c:680
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"U kan noue die opsies voorsien vir module %s.\n"
"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
"Bv. ``io=0x300 irq-7''"

#: ../../any.pm_.c:682
msgid "Module options:"
msgstr "Module opsies:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: ../../any.pm_.c:694
#, c-format
msgid "Which %s driver should I try?"
msgstr "Watter %s drywer meot ek probeer?"

#: ../../any.pm_.c:703
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
"ophang, maar dit sal nie skade veroorsaak nie."

#: ../../any.pm_.c:707
msgid "Autoprobe"
msgstr "Aftas"

#: ../../any.pm_.c:707
msgid "Specify options"
msgstr "Spesifieer opsies"

#: ../../any.pm_.c:719
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Laai van module %s het gefaal.\n"
"Wil u ander parameters probeer?"

#: ../../any.pm_.c:734
msgid "access to X programs"
msgstr ""

#: ../../any.pm_.c:735
msgid "access to rpm tools"
msgstr ""

#: ../../any.pm_.c:736
msgid "allow \"su\""
msgstr ""

#: ../../any.pm_.c:737
msgid "access to administrative files"
msgstr ""

#: ../../any.pm_.c:738
msgid "access to network tools"
msgstr ""

#: ../../any.pm_.c:739
msgid "access to compilation tools"
msgstr ""

#: ../../any.pm_.c:744
#, c-format
msgid "(already added %s)"
msgstr "(%s alreeds bygevoeg)"

#: ../../any.pm_.c:749
msgid "This password is too simple"
msgstr "Die wagwoorde is te eenvoudig"

#: ../../any.pm_.c:750
msgid "Please give a user name"
msgstr "Gee asb. 'n gebruikerskode"

#: ../../any.pm_.c:751
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"

#: ../../any.pm_.c:752
#, fuzzy
msgid "The user name is too long"
msgstr "Hierdie genruikerskode bestaan alreeds"

#: ../../any.pm_.c:753
msgid "This user name is already added"
msgstr "Hierdie genruikerskode bestaan alreeds"

#: ../../any.pm_.c:757
msgid "Add user"
msgstr "Voeg gebruiker by"

#: ../../any.pm_.c:758
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Tik 'n gebruiker in\n"
"%s"

#: ../../any.pm_.c:759
msgid "Accept user"
msgstr "Aanvaar gebruiker"

#: ../../any.pm_.c:770
msgid "Real name"
msgstr "Regte naam"

#: ../../any.pm_.c:771 ../../printer/printerdrake.pm_.c:802
#: ../../printer/printerdrake.pm_.c:915
msgid "User name"
msgstr "Gebruikerskode"

#: ../../any.pm_.c:774
msgid "Shell"
msgstr "Dop"

#: ../../any.pm_.c:776
msgid "Icon"
msgstr "Ikoon"

#: ../../any.pm_.c:803
msgid "Autologin"
msgstr "Outointeken"

#: ../../any.pm_.c:804
msgid ""
"I can set up your computer to automatically log on one user.\n"
"Do you want to use this feature?"
msgstr ""
"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
"Verlang u hierdie funksionaliteit?"

#: ../../any.pm_.c:808
msgid "Choose the default user:"
msgstr "Kies die verstek gebruiker:"

#
#: ../../any.pm_.c:809
msgid "Choose the window manager to run:"
msgstr "Kies die vensterbestuurder om te loop:"

#: ../../any.pm_.c:824
#, fuzzy
msgid "Please choose a language to use."
msgstr "Kies asb. 'n taal om te gebruik."

#: ../../any.pm_.c:826
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."

#: ../../any.pm_.c:840 ../../install_steps_interactive.pm_.c:697
#: ../../standalone/drakxtv_.c:70
msgid "All"
msgstr "Alles"

#: ../../any.pm_.c:961
#, fuzzy
msgid "Allow all users"
msgstr "Voeg 'n gebruiker by"

#: ../../any.pm_.c:961
#, fuzzy
msgid "No sharing"
msgstr "CUPS word gelaai"

#: ../../any.pm_.c:971 ../../install_any.pm_.c:1207 ../../standalone.pm_.c:185
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
"Hierdie pakket moet opgradeer word\n"
"Is u seker u wil dit deselekteer?"

#: ../../any.pm_.c:973
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""

#: ../../any.pm_.c:981 ../../install_any.pm_.c:1212 ../../standalone.pm_.c:190
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""

#: ../../any.pm_.c:987
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""

#: ../../any.pm_.c:1001
msgid "Launch userdrake"
msgstr ""

#: ../../any.pm_.c:1003
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user in this group."
msgstr ""

#: ../../any.pm_.c:1053 ../../security/level.pm_.c:7
msgid "Welcome To Crackers"
msgstr "Krakers welkom"

#: ../../any.pm_.c:1054 ../../security/level.pm_.c:8
msgid "Poor"
msgstr "Swak"

#: ../../any.pm_.c:1055 ../../mouse.pm_.c:31 ../../security/level.pm_.c:9
msgid "Standard"
msgstr "Standaard"

#: ../../any.pm_.c:1056 ../../security/level.pm_.c:10
msgid "High"
msgstr "Hoog"

#: ../../any.pm_.c:1057 ../../security/level.pm_.c:11
#, fuzzy
msgid "Higher"
msgstr "Hoog"

#: ../../any.pm_.c:1058 ../../security/level.pm_.c:12
msgid "Paranoid"
msgstr "Parano�es"

#: ../../any.pm_.c:1061
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
"wagwoord\n"
"toegang nie."

#: ../../any.pm_.c:1064
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
"aanbeveel nie."

#: ../../any.pm_.c:1065
#, fuzzy
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
"wat aan die internet as 'n kli�nt konnekteer. Daar is heelwat "
"sekuriteitstoetse."

#: ../../any.pm_.c:1066
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""

#: ../../any.pm_.c:1067
#, fuzzy
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kli�nte\n"
"af kan aanvaar."

#: ../../any.pm_.c:1070
#, fuzzy
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
"Sekuriteitseienskappe is maksimaal."

#: ../../any.pm_.c:1076
#, fuzzy
msgid "DrakSec Basic Options"
msgstr "Opsies"

#: ../../any.pm_.c:1077
#, fuzzy
msgid "Please choose the desired security level"
msgstr "Gebruik sekuriteitsvlak"

#: ../../any.pm_.c:1080
#, fuzzy
msgid "Security level"
msgstr "Sekuriteitsvlak word gestel."

#: ../../any.pm_.c:1082
#, fuzzy
msgid "Use libsafe for servers"
msgstr "Selekteer opsies vir bediener"

#: ../../any.pm_.c:1083
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr ""

#: ../../any.pm_.c:1084
msgid "Security Administrator (login or email)"
msgstr ""

#: ../../any.pm_.c:1166
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: ../../bootloader.pm_.c:436
#, c-format
msgid ""
"Welcome to %s the operating system chooser!\n"
"\n"
"Choose an operating system in the list above or\n"
"wait %d seconds for default boot.\n"
"\n"
msgstr ""
"Welkom by %s die bedryfstelselkeuseprogram!\n"
"\n"
"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
"%d sekonde vir die verstekopsie.\n"
"\n"

# NOTE: this message will be displayed by grub at boot time; that is
# using the BIOS font; that means cp437 charset on 99.99% of PC computers
# out there. It is the nsuggested that for non latin languages an ascii
# transliteration be used; or maybe the english text be used; as it is best
# The lines must fit on screen, aka length < 80
# and only one line per string for the GRUB messages
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:983
msgid "Welcome to GRUB the operating system chooser!"
msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:986
#, c-format
msgid "Use the %c and %c keys for selecting which entry is highlighted."
msgstr ""
"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
"word."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:989
msgid "Press enter to boot the selected OS, 'e' to edit the"
msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:992
msgid "commands before booting, or 'c' for a command-line."
msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#. -PO: and keep them smaller than 79 chars long
#: ../../bootloader.pm_.c:995
#, c-format
msgid "The highlighted entry will be booted automatically in %d seconds."
msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."

#: ../../bootloader.pm_.c:999
msgid "not enough room in /boot"
msgstr "nie genoeg spasie in /boot nie"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
#: ../../bootloader.pm_.c:1099
msgid "Desktop"
msgstr "Werkskerm"

#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
#: ../../bootloader.pm_.c:1101
msgid "Start Menu"
msgstr "Beginkieskaart"

#: ../../bootloader.pm_.c:1120
#, fuzzy, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Waar wil u die herlaaistelsel installeer"

#: ../../bootlook.pm_.c:53
msgid "Boot Style Configuration"
msgstr "Herlaaistylkonfigurasie"

#: ../../bootlook.pm_.c:70 ../../standalone/drakfloppy_.c:54
#: ../../standalone/harddrake2_.c:81 ../../standalone/harddrake2_.c:82
#: ../../standalone/logdrake_.c:74
msgid "/_File"
msgstr "/_L�er"

#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55
#: ../../standalone/logdrake_.c:80
msgid "/File/_Quit"
msgstr "/L�er/_Verlaat"

#: ../../bootlook.pm_.c:71 ../../standalone/drakfloppy_.c:55
#: ../../standalone/harddrake2_.c:82 ../../standalone/logdrake_.c:80
msgid "<control>Q"
msgstr "<control>Q"

#: ../../bootlook.pm_.c:82
msgid "NewStyle Categorizing Monitor"
msgstr "Nuwe monitorkategoriasiestyl"

#: ../../bootlook.pm_.c:83
msgid "NewStyle Monitor"
msgstr "Nuwe styl monitor"

#: ../../bootlook.pm_.c:84
msgid "Traditional Monitor"
msgstr "Tradisionele monitor"

#: ../../bootlook.pm_.c:85
msgid "Traditional Gtk+ Monitor"
msgstr "Tradisionele Gtk+ Monitor"

#: ../../bootlook.pm_.c:86
msgid "Launch Aurora at boot time"
msgstr "Laai Aurora met herlaaityd"

#: ../../bootlook.pm_.c:89
msgid "Lilo/grub mode"
msgstr "LILO/GRUB metode"

#: ../../bootlook.pm_.c:89
msgid "Yaboot mode"
msgstr "Yaboot metode"

#: ../../bootlook.pm_.c:138
#, fuzzy
msgid "Install themes"
msgstr "Installeer stelsel"

#: ../../bootlook.pm_.c:139
msgid ""
"Display theme\n"
"under console"
msgstr ""

#: ../../bootlook.pm_.c:140
#, fuzzy
msgid "Create new theme"
msgstr "Kies 'n nuwe grootte"

#: ../../bootlook.pm_.c:184
#, c-format
msgid "Backup %s to %s.old"
msgstr ""

#: ../../bootlook.pm_.c:187
#, c-format
msgid "Copy %s to %s"
msgstr ""

#: ../../bootlook.pm_.c:192 ../../bootlook.pm_.c:222 ../../bootlook.pm_.c:224
#: ../../bootlook.pm_.c:234 ../../bootlook.pm_.c:243 ../../bootlook.pm_.c:250
#: ../../diskdrake/dav.pm_.c:77 ../../diskdrake/hd_gtk.pm_.c:119
#: ../../diskdrake/interactive.pm_.c:216 ../../diskdrake/interactive.pm_.c:352
#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:481
#: ../../diskdrake/interactive.pm_.c:486 ../../diskdrake/smbnfs_gtk.pm_.c:45
#: ../../fsedit.pm_.c:239 ../../install_steps.pm_.c:75
#: ../../install_steps_interactive.pm_.c:67 ../../interactive/http.pm_.c:119
#: ../../interactive/http.pm_.c:120 ../../standalone/draksplash_.c:21
msgid "Error"
msgstr "Fout"

#: ../../bootlook.pm_.c:192
msgid "Lilo message not found"
msgstr ""

#: ../../bootlook.pm_.c:222
msgid "Can't write /etc/sysconfig/bootsplash."
msgstr ""

#: ../../bootlook.pm_.c:222
#, fuzzy, c-format
msgid "Write %s"
msgstr "XFree %s"

#: ../../bootlook.pm_.c:224
msgid ""
"Can't write /etc/sysconfig/bootsplash\n"
"File not found."
msgstr ""

#: ../../bootlook.pm_.c:235
#, c-format
msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
msgstr ""

#: ../../bootlook.pm_.c:238
#, c-format
msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
msgstr ""

#: ../../bootlook.pm_.c:244
msgid ""
"Can't relaunch LiLo!\n"
"Launch \"lilo\" as root in command line to complete LiLo theme installation."
msgstr ""

#: ../../bootlook.pm_.c:248
msgid "Relaunch 'lilo'"
msgstr ""

#: ../../bootlook.pm_.c:250 ../../standalone/draksplash_.c:156
#: ../../standalone/draksplash_.c:321 ../../standalone/draksplash_.c:449
#, fuzzy
msgid "Notice"
msgstr "Geen video"

#: ../../bootlook.pm_.c:251
msgid "LiLo and Bootsplash themes installation successfull"
msgstr ""

#: ../../bootlook.pm_.c:251
#, fuzzy
msgid "Theme installation failed!"
msgstr "Kies installasieklas"

#: ../../bootlook.pm_.c:259
#, c-format
msgid ""
"You are currently using %s as your boot manager.\n"
"Click on Configure to launch the setup wizard."
msgstr ""
"U gebruik huidig %s as herlaaibestuurder.\n"
"Kliek op Konfigureer om opstelassistent te laai."

#: ../../bootlook.pm_.c:261 ../../standalone/drakbackup_.c:2380
#: ../../standalone/drakbackup_.c:2390 ../../standalone/drakbackup_.c:2400
#: ../../standalone/drakbackup_.c:2408 ../../standalone/drakgw_.c:551
msgid "Configure"
msgstr "Konfigureer"

#: ../../bootlook.pm_.c:268
#, fuzzy
msgid "Splash selection"
msgstr "Stoor pakketseleksie"

#: ../../bootlook.pm_.c:271
msgid "Themes"
msgstr ""

#: ../../bootlook.pm_.c:273
msgid ""
"\n"
"Select theme for\n"
"lilo and bootsplash,\n"
"you can choose\n"
"them separatly"
msgstr ""

#: ../../bootlook.pm_.c:276
msgid "Lilo screen"
msgstr ""

#: ../../bootlook.pm_.c:281
msgid "Bootsplash"
msgstr ""

#: ../../bootlook.pm_.c:316
msgid "System mode"
msgstr "Stelselmode"

#: ../../bootlook.pm_.c:318
msgid "Launch the graphical environment when your system starts"
msgstr "Laai X-Windowstelsel met herlaai"

#: ../../bootlook.pm_.c:323
msgid "No, I don't want autologin"
msgstr "Nee, ek verlang outo-aanteken"

#: ../../bootlook.pm_.c:325
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"

#: ../../bootlook.pm_.c:335 ../../network/netconnect.pm_.c:96
#: ../../standalone/drakTermServ_.c:222 ../../standalone/drakTermServ_.c:355
#: ../../standalone/drakbackup_.c:4139 ../../standalone/drakbackup_.c:4797
#: ../../standalone/drakconnect_.c:105 ../../standalone/drakconnect_.c:137
#: ../../standalone/drakconnect_.c:293 ../../standalone/drakconnect_.c:432
#: ../../standalone/drakconnect_.c:518 ../../standalone/drakconnect_.c:561
#: ../../standalone/drakconnect_.c:665 ../../standalone/drakfont_.c:604
#: ../../standalone/drakfont_.c:783 ../../standalone/drakfont_.c:911
#: ../../standalone/net_monitor_.c:336 ../../ugtk.pm_.c:288
#: ../../ugtk2.pm_.c:355
msgid "OK"
msgstr "OK"

#: ../../common.pm_.c:107
msgid "GB"
msgstr "GB"

#: ../../common.pm_.c:107
msgid "KB"
msgstr "KB"

#: ../../common.pm_.c:107
msgid "MB"
msgstr "MB"

#: ../../common.pm_.c:115
msgid "TB"
msgstr "TB"

#: ../../common.pm_.c:123
#, c-format
msgid "%d minutes"
msgstr "%d minute"

#: ../../common.pm_.c:125
msgid "1 minute"
msgstr "1 minuut"

#: ../../common.pm_.c:127
#, c-format
msgid "%d seconds"
msgstr "%d sekondes"

#: ../../common.pm_.c:172
#, fuzzy
msgid "Can't make screenshots before partitioning"
msgstr "Ek kan nie meer partisies byvoeg nie"

#: ../../common.pm_.c:179
#, fuzzy, c-format
msgid "Screenshots will be available after install in %s"
msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."

#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:127
msgid "France"
msgstr "Frankryk"

#: ../../crypto.pm_.c:15
msgid "Costa Rica"
msgstr ""

#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:130
#, fuzzy
msgid "Belgium"
msgstr "Belgies"

#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
msgid "Czech Republic"
msgstr ""

#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
msgid "Germany"
msgstr "Duitsland"

#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
#, fuzzy
msgid "Greece"
msgstr "Grieks"

#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33
#, fuzzy
msgid "Norway"
msgstr "Norweegs"

#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34
#, fuzzy
msgid "Sweden"
msgstr "Sien"

#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:128
msgid "Netherlands"
msgstr ""

#: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:129 ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "Italy"
msgstr "Italiaans"

#: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38
#, fuzzy
msgid "Austria"
msgstr "seriaal"

#: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:118
#: ../../network/tools.pm_.c:131
msgid "United States"
msgstr ""

#: ../../diskdrake/dav.pm_.c:19
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: ../../diskdrake/dav.pm_.c:27
#, fuzzy
msgid "New"
msgstr "nuut"

#: ../../diskdrake/dav.pm_.c:63 ../../diskdrake/interactive.pm_.c:400
#: ../../diskdrake/smbnfs_gtk.pm_.c:81
msgid "Unmount"
msgstr "Ontheg"

#: ../../diskdrake/dav.pm_.c:64 ../../diskdrake/interactive.pm_.c:397
#: ../../diskdrake/smbnfs_gtk.pm_.c:82
msgid "Mount"
msgstr "Heg"

#: ../../diskdrake/dav.pm_.c:65
msgid "Server"
msgstr "Bediener"

#: ../../diskdrake/dav.pm_.c:66 ../../diskdrake/interactive.pm_.c:391
#: ../../diskdrake/interactive.pm_.c:580 ../../diskdrake/interactive.pm_.c:607
#: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/smbnfs_gtk.pm_.c:85
msgid "Mount point"
msgstr "Hegpunt"

#
#: ../../diskdrake/dav.pm_.c:85
#, fuzzy
msgid "Please enter the WebDAV server URL"
msgstr "Toets asb. die muis"

#: ../../diskdrake/dav.pm_.c:88
msgid "The URL must begin with http:// or https://"
msgstr ""

#: ../../diskdrake/dav.pm_.c:109
#, fuzzy
msgid "Server: "
msgstr "Bediener"

#: ../../diskdrake/dav.pm_.c:110 ../../diskdrake/interactive.pm_.c:452
#: ../../diskdrake/interactive.pm_.c:1102
#: ../../diskdrake/interactive.pm_.c:1177
msgid "Mount point: "
msgstr "Hegpunt:"

#: ../../diskdrake/dav.pm_.c:111 ../../diskdrake/interactive.pm_.c:1183
#, c-format
msgid "Options: %s"
msgstr "Opsies: %s"

#: ../../diskdrake/hd_gtk.pm_.c:97
msgid "Please make a backup of your data first"
msgstr "Rugsteun u data eers asb."

#: ../../diskdrake/hd_gtk.pm_.c:97 ../../diskdrake/interactive.pm_.c:946
#: ../../diskdrake/interactive.pm_.c:956
#: ../../diskdrake/interactive.pm_.c:1022
msgid "Read carefully!"
msgstr "Lees noukeurig!"

#: ../../diskdrake/hd_gtk.pm_.c:100
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
"van die skyf. (2048 sektors is genoeg)."

#: ../../diskdrake/hd_gtk.pm_.c:154
msgid "Wizard"
msgstr "Assistent"

#: ../../diskdrake/hd_gtk.pm_.c:187
msgid "Choose action"
msgstr "Kies aksie"

#: ../../diskdrake/hd_gtk.pm_.c:191
msgid ""
"You have one big FAT partition\n"
"(generally used by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"U het een massiewe FAT partisie. \n"
"(gewoonlik deur DOS/Windows gebruik)\n"
"Ek stel voor u verstel eers die grootte van di� partisie\n"
"(kliek daarop en kliek dan op \"Verstel Grootte\")"

#: ../../diskdrake/hd_gtk.pm_.c:194
msgid "Please click on a partition"
msgstr "Kliek asb. op 'n partisie"

#: ../../diskdrake/hd_gtk.pm_.c:208 ../../diskdrake/smbnfs_gtk.pm_.c:69
#: ../../install_steps_gtk.pm_.c:464
msgid "Details"
msgstr "Detail"

#: ../../diskdrake/hd_gtk.pm_.c:254
#, fuzzy
msgid "No hard drives found"
msgstr "Plaaslike drukker"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "Ext2"
msgstr "Ext2"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "FAT"
msgstr "FAT"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "HFS"
msgstr "HFS"

#: ../../diskdrake/hd_gtk.pm_.c:325
#, fuzzy
msgid "Journalised FS"
msgstr "Gejoernaliseer"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "SunOS"
msgstr "SunOS"

#: ../../diskdrake/hd_gtk.pm_.c:325
msgid "Swap"
msgstr "Ruilarea"

#: ../../diskdrake/hd_gtk.pm_.c:326 ../../diskdrake/interactive.pm_.c:1118
msgid "Empty"
msgstr "Leeg"

#: ../../diskdrake/hd_gtk.pm_.c:326 ../../install_steps_gtk.pm_.c:324
#: ../../install_steps_gtk.pm_.c:382 ../../mouse.pm_.c:165
#: ../../services.pm_.c:162 ../../standalone/drakbackup_.c:1719
msgid "Other"
msgstr "Ander"

#: ../../diskdrake/hd_gtk.pm_.c:330
msgid "Filesystem types:"
msgstr "LOersteltipes:"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:414
msgid "Create"
msgstr "Skep"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:392
#: ../../diskdrake/interactive.pm_.c:543 ../../diskdrake/removable.pm_.c:26
#: ../../diskdrake/removable.pm_.c:49 ../../standalone/harddrake2_.c:66
msgid "Type"
msgstr "Tipe"

#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/hd_gtk.pm_.c:349
#, c-format
msgid "Use ``%s'' instead"
msgstr "Gebruik ``%s'' instede."

#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:401
msgid "Delete"
msgstr "Uitwis"

#: ../../diskdrake/hd_gtk.pm_.c:353
msgid "Use ``Unmount'' first"
msgstr "Gebruik ``Ontheg'' eerste"

#: ../../diskdrake/hd_gtk.pm_.c:354 ../../diskdrake/interactive.pm_.c:530
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
"partisietipe"

#: ../../diskdrake/interactive.pm_.c:177
msgid "Choose a partition"
msgstr "Kies 'n partisie"

#: ../../diskdrake/interactive.pm_.c:177
msgid "Choose another partition"
msgstr "Kies 'n ander partisie"

#: ../../diskdrake/interactive.pm_.c:202
msgid "Exit"
msgstr "Verlaat"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Toggle to expert mode"
msgstr "Skakel oor na kundige gebruiksvlak"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Toggle to normal mode"
msgstr "Skakel oor na normale gebruiksvlak"

#: ../../diskdrake/interactive.pm_.c:228
msgid "Undo"
msgstr "Herroep"

#: ../../diskdrake/interactive.pm_.c:247
msgid "Continue anyway?"
msgstr "Wil u in elk geval voortgaan?"

#: ../../diskdrake/interactive.pm_.c:252
msgid "Quit without saving"
msgstr "Verlaat, maar moenie iets stoor nie"

#: ../../diskdrake/interactive.pm_.c:252
msgid "Quit without writing the partition table?"
msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"

#: ../../diskdrake/interactive.pm_.c:257
msgid "Do you want to save /etc/fstab modifications"
msgstr "Wil u die /etc/fstab veranderinge stoor?"

#: ../../diskdrake/interactive.pm_.c:271
msgid "Clear all"
msgstr "Verwydeer almal"

#: ../../diskdrake/interactive.pm_.c:272
msgid "Auto allocate"
msgstr "Outo-allokeer"

#: ../../diskdrake/interactive.pm_.c:273
#: ../../install_steps_interactive.pm_.c:220
msgid "More"
msgstr "Nog"

#: ../../diskdrake/interactive.pm_.c:278
msgid "Hard drive information"
msgstr "Hardeskyfinligting"

#: ../../diskdrake/interactive.pm_.c:310
msgid "All primary partitions are used"
msgstr "Alle prim�re partisies is gebruik"

#: ../../diskdrake/interactive.pm_.c:311
msgid "I can't add any more partition"
msgstr "Ek kan nie meer partisies byvoeg nie"

#: ../../diskdrake/interactive.pm_.c:312
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
"skep"

#: ../../diskdrake/interactive.pm_.c:322
#, fuzzy
msgid "Save partition table"
msgstr "Skryf partisietabel"

#: ../../diskdrake/interactive.pm_.c:323
#, fuzzy
msgid "Restore partition table"
msgstr "Reddingspartisietabel"

#: ../../diskdrake/interactive.pm_.c:324
msgid "Rescue partition table"
msgstr "Reddingspartisietabel"

#: ../../diskdrake/interactive.pm_.c:326
#, fuzzy
msgid "Reload partition table"
msgstr "Reddingspartisietabel"

#: ../../diskdrake/interactive.pm_.c:331
#, fuzzy
msgid "Removable media automounting"
msgstr "Verwyderbare media"

#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:360
msgid "Select file"
msgstr "Selekteer lOer"

#: ../../diskdrake/interactive.pm_.c:347
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
"Wil u voortgaan?"

#: ../../diskdrake/interactive.pm_.c:361 ../../harddrake/sound.pm_.c:202
#: ../../network/modem.pm_.c:95
msgid "Warning"
msgstr "Waarskuwing"

#: ../../diskdrake/interactive.pm_.c:362
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Sit 'n floppie in die aandrywer.\n"
"Alle data op hierdie floppie sal verloor word."

#: ../../diskdrake/interactive.pm_.c:373
msgid "Trying to rescue partition table"
msgstr "Partisietabel Reddingspoging"

#: ../../diskdrake/interactive.pm_.c:379
msgid "Detailed information"
msgstr "Gedetaileerde inligting"

#: ../../diskdrake/interactive.pm_.c:394 ../../diskdrake/interactive.pm_.c:674
msgid "Resize"
msgstr "Verstel Grootte"

#: ../../diskdrake/interactive.pm_.c:395 ../../diskdrake/interactive.pm_.c:727
msgid "Move"
msgstr "Skuif"

#: ../../diskdrake/interactive.pm_.c:396
msgid "Format"
msgstr "Formatteer"

#: ../../diskdrake/interactive.pm_.c:398
msgid "Add to RAID"
msgstr "Voeg by RAID"

#: ../../diskdrake/interactive.pm_.c:399
msgid "Add to LVM"
msgstr "Voeg by LVM"

#: ../../diskdrake/interactive.pm_.c:402
msgid "Remove from RAID"
msgstr "Verwyder uit RAID"

#: ../../diskdrake/interactive.pm_.c:403
msgid "Remove from LVM"
msgstr "Verwyder uit LVM"

#: ../../diskdrake/interactive.pm_.c:404
msgid "Modify RAID"
msgstr "Verander RAID"

#: ../../diskdrake/interactive.pm_.c:405
msgid "Use for loopback"
msgstr "Gebruik vir teruglus"

#: ../../diskdrake/interactive.pm_.c:445
msgid "Create a new partition"
msgstr "Kies 'n nuwe grootte"

#: ../../diskdrake/interactive.pm_.c:448
msgid "Start sector: "
msgstr "Kies sektor: "

#: ../../diskdrake/interactive.pm_.c:450 ../../diskdrake/interactive.pm_.c:827
msgid "Size in MB: "
msgstr "Grootte in MB: "

#: ../../diskdrake/interactive.pm_.c:451 ../../diskdrake/interactive.pm_.c:828
msgid "Filesystem type: "
msgstr "LOerstelseltipe: "

#: ../../diskdrake/interactive.pm_.c:456
msgid "Preference: "
msgstr "Voorkeure: "

#: ../../diskdrake/interactive.pm_.c:481
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: ../../diskdrake/interactive.pm_.c:511
#, fuzzy
msgid "Remove the loopback file?"
msgstr "Teruglusl�er %s word geformateer"

#: ../../diskdrake/interactive.pm_.c:541
msgid "Change partition type"
msgstr "Verander partisietipe"

#
#: ../../diskdrake/interactive.pm_.c:542 ../../diskdrake/removable.pm_.c:48
msgid "Which filesystem do you want?"
msgstr "Watter l�erstelsel verlang u?"

#: ../../diskdrake/interactive.pm_.c:548
msgid "Switching from ext2 to ext3"
msgstr "Oorskakeling van ext2 na ext3"

#: ../../diskdrake/interactive.pm_.c:578
#, c-format
msgid "Where do you want to mount loopback file %s?"
msgstr "Waar wil u teruglusl�er %s heg?"

#: ../../diskdrake/interactive.pm_.c:579
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Waar wil u toestel %s heg?"

#: ../../diskdrake/interactive.pm_.c:585
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
"gebruik word. Verwyder eers die teruglus."

#: ../../diskdrake/interactive.pm_.c:606
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "Waar wil u toestel %s heg?"

#: ../../diskdrake/interactive.pm_.c:630
msgid "Computing FAT filesystem bounds"
msgstr "FAT l�erstelselgrense word bereken"

#: ../../diskdrake/interactive.pm_.c:630 ../../diskdrake/interactive.pm_.c:689
#: ../../install_interactive.pm_.c:131
msgid "Resizing"
msgstr "Grootteverandering"

#: ../../diskdrake/interactive.pm_.c:662
msgid "This partition is not resizeable"
msgstr "Hierdie partisie se greootte kan nie verstel word nie"

#: ../../diskdrake/interactive.pm_.c:667
msgid "All data on this partition should be backed-up"
msgstr "Alle data om hierdie partisie moet gerugsteun word."

#: ../../diskdrake/interactive.pm_.c:669
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"

#: ../../diskdrake/interactive.pm_.c:674
msgid "Choose the new size"
msgstr "Kies die nuwe grootte"

#: ../../diskdrake/interactive.pm_.c:675
msgid "New size in MB: "
msgstr "Nuwe grootte in MB: "

#: ../../diskdrake/interactive.pm_.c:728
msgid "Which disk do you want to move it to?"
msgstr "Na watter skyf wil u skuif?"

#: ../../diskdrake/interactive.pm_.c:729
msgid "Sector"
msgstr "Sektor"

#: ../../diskdrake/interactive.pm_.c:730
msgid "Which sector do you want to move it to?"
msgstr "Na watter sektor wil u skuif?"

#: ../../diskdrake/interactive.pm_.c:733
msgid "Moving"
msgstr "Verskuiwing"

#: ../../diskdrake/interactive.pm_.c:733
msgid "Moving partition..."
msgstr "Partisie word verskuif..."

#: ../../diskdrake/interactive.pm_.c:750
msgid "Choose an existing RAID to add to"
msgstr "Kies 'n bestaande RAID om by toe te voeg"

#: ../../diskdrake/interactive.pm_.c:751 ../../diskdrake/interactive.pm_.c:768
msgid "new"
msgstr "nuut"

#: ../../diskdrake/interactive.pm_.c:766
msgid "Choose an existing LVM to add to"
msgstr "Kies 'n bestaande LVM om by toe te voeg"

#: ../../diskdrake/interactive.pm_.c:771
msgid "LVM name?"
msgstr "LVM naam?"

#: ../../diskdrake/interactive.pm_.c:812
msgid "This partition can't be used for loopback"
msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."

#: ../../diskdrake/interactive.pm_.c:825
msgid "Loopback"
msgstr "Teruglus"

#: ../../diskdrake/interactive.pm_.c:826
msgid "Loopback file name: "
msgstr "Teruglus l�ernaam:"

#: ../../diskdrake/interactive.pm_.c:831
#, fuzzy
msgid "Give a file name"
msgstr "Regte naam"

#: ../../diskdrake/interactive.pm_.c:834
msgid "File already used by another loopback, choose another one"
msgstr "L�er word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"

#: ../../diskdrake/interactive.pm_.c:835
msgid "File already exists. Use it?"
msgstr "L�er bestaan alreeds. Moet dit gebruik word?"

#: ../../diskdrake/interactive.pm_.c:858
msgid "Mount options"
msgstr "Hegopsies:"

#: ../../diskdrake/interactive.pm_.c:865
msgid "Various"
msgstr "Verskeie"

#: ../../diskdrake/interactive.pm_.c:929 ../../standalone/drakfloppy_.c:76
msgid "device"
msgstr "toestel"

#: ../../diskdrake/interactive.pm_.c:930
msgid "level"
msgstr "vlak"

#: ../../diskdrake/interactive.pm_.c:931
msgid "chunk size"
msgstr "blokgrootte"

#: ../../diskdrake/interactive.pm_.c:947
msgid "Be careful: this operation is dangerous."
msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"

#: ../../diskdrake/interactive.pm_.c:962
msgid "What type of partitioning?"
msgstr "Watter tipe van partisionering?"

#: ../../diskdrake/interactive.pm_.c:978
#, fuzzy, c-format
msgid "The package %s is needed. Install it?"
msgstr ""
"Hierdie pakket moet opgradeer word\n"
"Is u seker u wil dit deselekteer?"

#: ../../diskdrake/interactive.pm_.c:992
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""
"Jammer, ek kan nie die versoek om /boot om hierdie skyf (op 'n silinder > "
"1024) te skep,\n"
"aanvaar nie. As u LILO gebruik sal dit nie werk nie en as u nie LILO "
"gebruik\n"
"nie, dan het u nie /boot nodig nie."

#: ../../diskdrake/interactive.pm_.c:996
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""
"_ keuse vir die \"root\" partisie (/) is fisies buite die 1024de silindervan "
"die\n"
"hardeskyf en u het nie 'n /boot partisie nie. Indien u beplan om LILO te "
"gebruik,moet u\n"
"asb. 'n /boot partisie skep,"

#: ../../diskdrake/interactive.pm_.c:1002
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"So be careful to add a /boot partition"
msgstr ""
"U het 'n sagteware RAID-partisie as wortel (/).\n"
"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
"Onthou om 'n /boot by te voeg."

#: ../../diskdrake/interactive.pm_.c:1022
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Partisietabel van skyf %s gaan opdateer word!"

#: ../../diskdrake/interactive.pm_.c:1026
msgid "You'll need to reboot before the modification can take place"
msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"

#: ../../diskdrake/interactive.pm_.c:1037
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "Alle data om partisie %s sal uitgewis word met formatering."

#: ../../diskdrake/interactive.pm_.c:1039
msgid "Formatting"
msgstr "Formatering"

#: ../../diskdrake/interactive.pm_.c:1040
#, c-format
msgid "Formatting loopback file %s"
msgstr "Teruglusl�er %s word geformateer"

#: ../../diskdrake/interactive.pm_.c:1041
#: ../../install_steps_interactive.pm_.c:466
#, c-format
msgid "Formatting partition %s"
msgstr "Partisie %s word formateer"

#: ../../diskdrake/interactive.pm_.c:1052
#, fuzzy
msgid "Hide files"
msgstr "mkraid het gefaal"

#: ../../diskdrake/interactive.pm_.c:1052
#, fuzzy
msgid "Move files to the new partition"
msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"

#: ../../diskdrake/interactive.pm_.c:1053
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1064
#, fuzzy
msgid "Moving files to the new partition"
msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"

#: ../../diskdrake/interactive.pm_.c:1068
#, c-format
msgid "Copying %s"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1072
#, fuzzy, c-format
msgid "Removing %s"
msgstr "LPD word verwyder..."

#: ../../diskdrake/interactive.pm_.c:1082
#, c-format
msgid "partition %s is now known as %s"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1103
#: ../../diskdrake/interactive.pm_.c:1162
msgid "Device: "
msgstr "Toestel:"

#: ../../diskdrake/interactive.pm_.c:1104
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"

#: ../../diskdrake/interactive.pm_.c:1108
#: ../../diskdrake/interactive.pm_.c:1116
#: ../../diskdrake/interactive.pm_.c:1181
msgid "Type: "
msgstr "Tipe:"

#: ../../diskdrake/interactive.pm_.c:1112
msgid "Name: "
msgstr "Naam: "

#: ../../diskdrake/interactive.pm_.c:1120
#, c-format
msgid "Start: sector %s\n"
msgstr "Begin: sektor %s\n"

#: ../../diskdrake/interactive.pm_.c:1121
#, c-format
msgid "Size: %s"
msgstr "Grootte: %s"

#: ../../diskdrake/interactive.pm_.c:1123
#, c-format
msgid ", %s sectors"
msgstr ", %s sektore"

#: ../../diskdrake/interactive.pm_.c:1125
#, fuzzy, c-format
msgid "Cylinder %d to %d\n"
msgstr "Silinder %d na silinder %d\n"

#: ../../diskdrake/interactive.pm_.c:1126
msgid "Formatted\n"
msgstr "Geformateer\n"

#: ../../diskdrake/interactive.pm_.c:1127
msgid "Not formatted\n"
msgstr "Nie geformatter\n"

#: ../../diskdrake/interactive.pm_.c:1128
msgid "Mounted\n"
msgstr "Geheg\n"

#: ../../diskdrake/interactive.pm_.c:1129
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: ../../diskdrake/interactive.pm_.c:1131
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr "Teruglus l�er(s): %s\n"

#: ../../diskdrake/interactive.pm_.c:1132
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Verstekpartisie vir herlaai\n"
"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"

#: ../../diskdrake/interactive.pm_.c:1134
#, c-format
msgid "Level %s\n"
msgstr "Vlak %s\n"

#: ../../diskdrake/interactive.pm_.c:1135
#, c-format
msgid "Chunk size %s\n"
msgstr "Blokgrootte %s\n"

#: ../../diskdrake/interactive.pm_.c:1136
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-skywe %s\n"

#: ../../diskdrake/interactive.pm_.c:1138
#, c-format
msgid "Loopback file name: %s"
msgstr "Teruglus l�ernaam: %s"

#: ../../diskdrake/interactive.pm_.c:1141
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition, you should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Dis hoogs waarskynlik dat hierdie partisie\n"
"drywerpartisie is en verkieslik alleen gelos\n"
"moet word.\n"

#: ../../diskdrake/interactive.pm_.c:1144
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Hierdie spesiale herlaaipartisie\n"
"is om u stelsel te duolaai.\n"

#: ../../diskdrake/interactive.pm_.c:1163
msgid "Read-only"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1164
#, c-format
msgid "Size: %s\n"
msgstr "Grootte: %s\n"

#: ../../diskdrake/interactive.pm_.c:1165
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"

#: ../../diskdrake/interactive.pm_.c:1166
msgid "Info: "
msgstr "Info:"

#: ../../diskdrake/interactive.pm_.c:1167
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-skywe %s\n"

#: ../../diskdrake/interactive.pm_.c:1168
#, c-format
msgid "Partition table type: %s\n"
msgstr "Partisietabeltipe: %s\n"

#: ../../diskdrake/interactive.pm_.c:1169
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "op bus %d id %d\n"

#: ../../diskdrake/interactive.pm_.c:1199
#, fuzzy
msgid "Filesystem encryption key"
msgstr "LOerstelseltipe: "

#: ../../diskdrake/interactive.pm_.c:1200
msgid "Choose your filesystem encryption key"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1203
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."

#: ../../diskdrake/interactive.pm_.c:1204
#, fuzzy
msgid "The encryption keys do not match"
msgstr "Die wagwoorde stem nie ooreen nie."

#: ../../diskdrake/interactive.pm_.c:1207
msgid "Encryption key"
msgstr ""

#: ../../diskdrake/interactive.pm_.c:1208
msgid "Encryption key (again)"
msgstr ""

#: ../../diskdrake/removable.pm_.c:47
msgid "Change type"
msgstr "Verander tipe"

#: ../../diskdrake/smbnfs_gtk.pm_.c:162
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175
#, fuzzy
msgid "Domain Authentication Required"
msgstr "Magtiging"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Another one"
msgstr "Internet"

#: ../../diskdrake/smbnfs_gtk.pm_.c:167
#, fuzzy
msgid "Which username"
msgstr "Gebruikerskode"

#: ../../diskdrake/smbnfs_gtk.pm_.c:176
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""

#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3477
#, fuzzy
msgid "Username"
msgstr "Gebruikerskode"

#: ../../diskdrake/smbnfs_gtk.pm_.c:180
#, fuzzy
msgid "Domain"
msgstr "NIS-domein"

#: ../../diskdrake/smbnfs_gtk.pm_.c:200
#, fuzzy
msgid "Search servers"
msgstr "DNS bediener"

#: ../../fs.pm_.c:547 ../../fs.pm_.c:557 ../../fs.pm_.c:561 ../../fs.pm_.c:565
#: ../../fs.pm_.c:569 ../../fs.pm_.c:573
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatering ban %s het gefaal"

#: ../../fs.pm_.c:610
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "Ek weet nie om %s as tipe %s te formateer nie"

#: ../../fs.pm_.c:684 ../../fs.pm_.c:727
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""

#: ../../fs.pm_.c:742 ../../partition_table.pm_.c:599
#, c-format
msgid "error unmounting %s: %s"
msgstr "fout met onthegting van %s: %s"

#: ../../fsedit.pm_.c:21
msgid "simple"
msgstr "eenvoudig"

#: ../../fsedit.pm_.c:25
msgid "with /usr"
msgstr ""

#: ../../fsedit.pm_.c:30
msgid "server"
msgstr "bediener"

#: ../../fsedit.pm_.c:240
#, fuzzy, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to loose all the partitions?\n"
msgstr ""
"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
"(fout is %s)\n"
"\n"
"Will u al die partisies verwyder?\n"

#: ../../fsedit.pm_.c:501
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"

#: ../../fsedit.pm_.c:502
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"

#: ../../fsedit.pm_.c:521
msgid "Mount points must begin with a leading /"
msgstr "Hegpunte moet met 'n / begin"

#: ../../fsedit.pm_.c:522
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"

#: ../../fsedit.pm_.c:526
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."

#: ../../fsedit.pm_.c:528
msgid "This directory should remain within the root filesystem"
msgstr "Hierdie l�ergids moet altyd in die wortell�erstelsel bly"

#: ../../fsedit.pm_.c:530
#, fuzzy
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "U benodig 'n ware l�erstelsel (ext2, reiserfs) vir hierdie hegpunt\n"

#: ../../fsedit.pm_.c:532
#, fuzzy, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."

#: ../../fsedit.pm_.c:599
#, fuzzy
msgid "Not enough free space for auto-allocating"
msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"

#: ../../fsedit.pm_.c:601
msgid "Nothing to do"
msgstr ""

#: ../../fsedit.pm_.c:694
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Four om %s in skryfmode te open: %s"

#: ../../harddrake/data.pm_.c:71
msgid "cpu /* "
msgstr ""

#: ../../harddrake/sound.pm_.c:170
msgid "No alternative driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:171
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""

#: ../../harddrake/sound.pm_.c:173
#, fuzzy
msgid "Sound configuration"
msgstr "Konfigurasie"

#: ../../harddrake/sound.pm_.c:174
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""

#: ../../harddrake/sound.pm_.c:176
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""

#: ../../harddrake/sound.pm_.c:178
#, fuzzy
msgid "Driver:"
msgstr "Drywer"

#: ../../harddrake/sound.pm_.c:183 ../../standalone/drakTermServ_.c:303
#: ../../standalone/drakbackup_.c:3878 ../../standalone/drakbackup_.c:3911
#: ../../standalone/drakbackup_.c:3937 ../../standalone/drakbackup_.c:3964
#: ../../standalone/drakbackup_.c:3991 ../../standalone/drakbackup_.c:4030
#: ../../standalone/drakbackup_.c:4051 ../../standalone/drakbackup_.c:4078
#: ../../standalone/drakbackup_.c:4108 ../../standalone/drakbackup_.c:4134
#: ../../standalone/drakbackup_.c:4157 ../../standalone/drakfont_.c:690
msgid "Help"
msgstr ""

#: ../../harddrake/sound.pm_.c:185
msgid "Switching between ALSA and OSS help"
msgstr ""

#: ../../harddrake/sound.pm_.c:186
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independant "
"sound API (it's available on most unices systems) but it's a very basic and "
"limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: ../../harddrake/sound.pm_.c:202
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oopses the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""

#: ../../harddrake/sound.pm_.c:205 ../../standalone/drakconnect_.c:298
msgid "Please Wait... Applying the configuration"
msgstr "Wag asb... Konfigurasie word toegpas"

#: ../../harddrake/sound.pm_.c:205 ../../interactive.pm_.c:382
#: ../../standalone/drakxtv_.c:108 ../../standalone/harddrake2_.c:113
#: ../../standalone/service_harddrake_.c:64
msgid "Please wait"
msgstr "Wag asb."

#: ../../harddrake/sound.pm_.c:210
msgid "No known driver"
msgstr ""

#: ../../harddrake/sound.pm_.c:211
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""

#: ../../harddrake/sound.pm_.c:214
#, fuzzy
msgid "Unkown driver"
msgstr "Onbekende model"

#: ../../harddrake/sound.pm_.c:215
#, c-format
msgid ""
"The \"%s\" driver for your sound card is unlisted\n"
"\n"
"Please send the output of the \"lspcidrake -v\" command to\n"
"<install at mandrakesoft dot com>\n"
"with subject: unlisted sound driver \"%s\""
msgstr ""

#: ../../harddrake/v4l.pm_.c:14 ../../harddrake/v4l.pm_.c:64
#, fuzzy
msgid "Auto-detect"
msgstr "Gebruik outobespeuring"

#: ../../harddrake/v4l.pm_.c:65 ../../harddrake/v4l.pm_.c:198
#, fuzzy
msgid "Unknown|Generic"
msgstr "Generies"

#: ../../harddrake/v4l.pm_.c:97
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:98
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""

#: ../../harddrake/v4l.pm_.c:224
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed"
msgstr ""

#: ../../harddrake/v4l.pm_.c:227
#, fuzzy
msgid "Card model:"
msgstr "Kaartgeheue (DMA)"

#: ../../harddrake/v4l.pm_.c:228
#, fuzzy
msgid "Tuner type:"
msgstr "Verander tipe"

#: ../../harddrake/v4l.pm_.c:229
msgid "Number of capture buffers:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:229
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: ../../harddrake/v4l.pm_.c:231
#, fuzzy
msgid "PLL setting:"
msgstr "Formatering"

#: ../../harddrake/v4l.pm_.c:232
msgid "Radio support:"
msgstr ""

#: ../../harddrake/v4l.pm_.c:232
msgid "enable radio support"
msgstr ""

#: ../../help.pm_.c:13
#, fuzzy
msgid ""
"GNU/Linux is a multiuser system, and this means that each user can have his\n"
"own preferences, his own files and so on. You can read the ``User Guide''\n"
"to learn more this concept. But unlike \"root\", which is the\n"
"administrator, the users you add here will not be entitled to change\n"
"anything except their own files and their own configurations. You will have\n"
"to create at least one regular user for yourself. That account is where you\n"
"should log in for routine use. Although it is very practical to log in as\n"
"\"root\" everyday, it may also be very dangerous! The slightest mistake\n"
"could mean that your system would not work any more. If you make a serious\n"
"mistake as a regular user, you may only lose some information, but not the\n"
"entire system.\n"
"\n"
"First, you have to enter your real name. This is not mandatory, of course\n"
"-- as you can actually enter whatever you want. DrakX will then take the\n"
"first word you have entered in the box and will bring it over to the \"User\n"
"name\". This is the name this particular user will use to log onto the\n"
"system. You can change it. You then have to enter a password here. A\n"
"non-privileged (regular) user's password is not as crucial as the \"root\"\n"
"one from a security point of view, but that is no reason to neglect it:\n"
"after all, your files are at risk.\n"
"\n"
"If you click on \"Accept user\", you can then add as many as you want. Add\n"
"a user for each one of the people meant to use that computer. When you are\n"
"finish adding all the users you want, select \"Done\".\n"
"\n"
"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
"for that user (bash by default).\n"
"\n"
"When you are finished adding all users, you will be proposed to choose a\n"
"user which can automatically log into the system when the computer boots\n"
"up. If you are interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click \"Yes\".\n"
"If you are not interested in this feature, click \"No\"."
msgstr ""
"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
"eie\n"
"voorkeure kan stel, met sy eie l�ers ens. U kan meer hieroor in die "
"gebruikersgids\n"
"lees. Maak andersins as 'root', die supergebruiker, kan gebruikers wat u "
"hier byvoeg\n"
"niks verander behalwe hul eie l�ers en konfigurasie nie. U moet ten minste "
"een gewone\n"
"gebruiker vir u self skep. Hierdie gebruker is die een waaronder u moet "
"inteken vir\n"
"normale gebruik van die stelsel. Alhoewel dit baie gemaklik is om as 'root' "
"in te teken vir\n"
"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan u stelsel "
"immobiliseer. 'n Fout\n"
"wat as gewone gebruiker gemaak word sal net daardie gebruiker be�nvloed\n"
"en nie hele stelsel nie.\n"
"\n"
"\n"
"Eers moet u u eie naam intik. Dit is nie verpligtend nie, want u kan eintlik "
"enigiets intik as\n"
"u wil. DrakX sal dan die eerste woord wat u ingetik het in die "
"gebruikerskode inskrywingsveld\n"
"plaas. U kan hier verander indien u wil. Dit is die gebruikerskode waarmee "
"die gebruiker in die\n"
"stelsel sal inteken. U moet dan ook 'n wagwoord hier invoeg. 'n Gewone "
"gebruiker se wagwoord\n"
"is nie so krities as di� van die supergebruiker (uit 'n sekuriteitsoogpunt) "
"nie, maar daar is geen\n"
"rede om agterlosig met u data te wees nie.\n"
"\n"
"\n"
"Indien u op Aanvaar kliek sal die gebruiker geskep word en kan u nog "
"gebruikers byvoeg.\n"
"U kan vir al u vriende gebruikerskodes skep of sommer een vir pa en ma ook. "
"Wanneer u\n"
"klaar is kliek op Klaar.\n"
"\n"
"Kliek op die Gevorderd knoppie indien u die verstek instruksiedop vir die "
"gebruiker wil verander.\n"
"Dit is bash by verstek."

#: ../../help.pm_.c:48
msgid ""
"Listed above are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, they are good for most common\n"
"installations. If you make any changes, you must at least define a root\n"
"partition (\"/\"). Do not choose too small a partition or you will not be\n"
"able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: ../../help.pm_.c:79
msgid ""
"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
"knows if a selected package is located on another CD-ROM and will eject the\n"
"current CD and ask you to insert a different one as required."
msgstr ""

#: ../../help.pm_.c:84
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"you are not supposed to know them all by heart.\n"
"\n"
"If you are performing a standard installation from a CD-ROM, you will first\n"
"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
"the CD labels and highlight the boxes corresponding to the CDs you have\n"
"available for installation. Click \"OK\" when you are ready to continue.\n"
"\n"
"Packages are sorted in groups corresponding to a particular use of your\n"
"machine. The groups themselves are sorted into four sections:\n"
"\n"
" * \"Workstation\": if you plan to use your machine as a workstation,\n"
"select one or more of the corresponding groups;\n"
"\n"
" * \"Development\": if your machine is to be used for programming, choose\n"
"the desired group(s);\n"
"\n"
" * \"Server\": if your machine is intended to be a server, you will be able\n"
"to select which of the most common services you wish to install on your\n"
"machine;\n"
"\n"
" * \"Graphical Environment\": finally, this is where you will choose your\n"
"preferred graphical environment. At least one must be selected if you want\n"
"to have a graphical workstation!\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"With X\": install the fewest packages possible to have a working\n"
"graphical desktop;\n"
"\n"
" * \"With basic documentation\": installs the base system plus basic\n"
"utilities and their documentation. This installation is suitable for\n"
"setting up a server;\n"
"\n"
" * \"Truly minimal install\": will install the strict minimum necessary to\n"
"get a working Linux system, in command line only. This installation is\n"
"about 65Mb large.\n"
"\n"
"You can check the \"Individual package selection\" box, which is useful if\n"
"you are familiar with the packages being offered or if you want to have\n"
"total control over what will be installed.\n"
"\n"
"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
"groups to avoid installing any new package. This is useful to repair or\n"
"update an existing system."
msgstr ""

#: ../../help.pm_.c:135
msgid ""
"Finally, depending on whether or not you chose to be able to select\n"
"individual packages, you will be presented a tree containing all packages\n"
"classified by groups and subgroups. While browsing the tree, you can select\n"
"entire groups, subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right. When your selection is finished, click the \"Install\" button which\n"
"will then launch the installation process. Depending on the speed of your\n"
"hardware and the number of packages that need to be installed, it may take\n"
"a while to complete the process. An installation time estimate is displayed\n"
"on the screen, to help you gauge if there is sufficient time to enjoy a cup\n"
"of coffee.\n"
"\n"
"!! If a server package has been selected, either intentionally or because\n"
"it was part of a whole group, you will be asked to confirm that you really\n"
"want those servers to be installed. Under Mandrake Linux, any installed\n"
"servers are started by default at boot time. Even if they are safe and have\n"
"no known issues at the time the distribution was shipped, it may happen\n"
"that security holes are discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
"install the listed services and they will be started automatically by\n"
"default. !!\n"
"\n"
"The \"Automatic dependencies\" option simply disables the warning dialog\n"
"which appears whenever the installer automatically selects a package. This\n"
"occurs because it has determined that it needs to satisfy a dependency with\n"
"another package in order to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows to load the\n"
"package list chosen during a previous installation. Clicking on this icon\n"
"will ask you to insert a floppy disk previously created at the end of\n"
"another installation. See the second tip of the previous step on how to\n"
"create such a floppy disk."
msgstr ""

#: ../../help.pm_.c:171
msgid ""
"You are now able to set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"OK\".\n"
"The autodetection of network devices and modem will be launched. If this\n"
"detection fails, uncheck the \"Use auto-detection\" box next time. You may\n"
"also choose not to configure the network, or do it later; in that case,\n"
"simply click the \"Cancel\" button.\n"
"\n"
"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"Here, we will not detail each configuration. Simply make sure that you have\n"
"all the parameters from your Internet Service Provider or system\n"
"administrator.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection.\n"
"\n"
"If you wish to configure the network later after installation, or if you\n"
"are finished configuring your network connection, click \"Cancel\"."
msgstr ""

#: ../../help.pm_.c:193
#, fuzzy
msgid ""
"You may now choose which services you wish to start at boot time.\n"
"\n"
"Here are listed all the services available with the current installation.\n"
"Review them carefully and uncheck those which are not always needed at boot\n"
"time.\n"
"\n"
"You can get a short explanatory text about a service by selecting a\n"
"specific service. However, if you are not sure whether a service is useful\n"
"or not, it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services which you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""
"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
"wat die rol van die diens verduidelik.\n"
"\n"
"Wees versigtig met hierdie stap. Indien u beplan om di� rekenaar as 'n\n"
"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."

#: ../../help.pm_.c:210
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
"local time according to the time zone you selected. It is however possible\n"
"to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n"
"hardware clock is the same as the system clock. This is useful when the\n"
"machine is hosting another operating system like Windows.\n"
"\n"
"The \"Automatic time synchronization\" option will automatically regulate\n"
"the clock by connecting to a remote time server on the Internet. In the\n"
"list that is presented, choose a server located near you. Of course you\n"
"must have a working Internet connection for this feature to work. It will\n"
"actually install on your machine a time server which can be optionally used\n"
"by other machines on your local network."
msgstr ""

#: ../../help.pm_.c:224
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely.\n"
"\n"
"You will be presented the list of available resolutions and color depth\n"
"available for your hardware. Choose the one that best suit your needs (you\n"
"will be able to change that after installation though). When you are\n"
"satisfied with the sample shown in the monitor, click \"OK\". A window will\n"
"then appear and ask you if you can see it.\n"
"\n"
"If you are doing an \"Expert\" installation, you will enter the X\n"
"configuration wizard. See the corresponding section of the manual for more\n"
"information about this wizard.\n"
"\n"
"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
"will proceed to the next step. If you cannot see the message, it simply\n"
"means that the configuration was wrong and the test will automatically end\n"
"after 10 seconds, restoring the screen. Refer then to the video\n"
"configuration section of the user guide for more information on how to\n"
"configure your display."
msgstr ""

#: ../../help.pm_.c:246
msgid ""
"Finally, you will be asked whether you want to see the graphical interface\n"
"at boot. Note this question will be asked even if you chose not to test the\n"
"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
"act as a server, or if you were not successful in getting the display\n"
"configured."
msgstr ""

#: ../../help.pm_.c:253
msgid ""
"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
"should come back to this step for help in at least two situations:\n"
"\n"
" * when installing the bootloader, DrakX will rewrite the boot sector (\n"
"MBR) of your main disk (unless you are using another boot manager), to\n"
"allow you to start up with either Windows or GNU/Linux (assuming you have\n"
"Windows in your system). If you need to reinstall Windows, the Microsoft\n"
"install process will rewrite the boot sector, and then you will not be able\n"
"to start GNU/Linux!\n"
"\n"
" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
"contains a fair number of system tools for restoring a system, which has\n"
"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
"password, or any other reason.\n"
"\n"
"If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n"
"floppy disk you will insert must be empty or contain data which you do not\n"
"need. You will not have to format it since DrakX will rewrite the whole\n"
"disk."
msgstr ""

#: ../../help.pm_.c:277
msgid ""
"You now need to choose where you want to install the Mandrake Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space, you will need\n"
"to partition it. Basically, partitioning a hard drive consists of logically\n"
"dividing it to create space to install your new Mandrake Linux system.\n"
"\n"
"Because the partitioning process' effects are usually irreversible,\n"
"partitioning can be intimidating and stressful if you are an inexperienced\n"
"user. Fortunately, there is a wizard which simplifies this process. Before\n"
"beginning, please consult the manual and take your time.\n"
"\n"
"If you are running the installation in Expert mode, you will enter\n"
"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
"fine-tune your partitions. See the DiskDrake section in the ``Starter\n"
"Guide''. From the installation interface, you can use the wizards as\n"
"described here by clicking the dialog's \"Wizard\" button.\n"
"\n"
"If partitions have already been defined, either from a previous\n"
"installation or from another partitioning tool, simply select those to\n"
"install your Linux system.\n"
"\n"
"If partitions are not defined, you will need to create them using the\n"
"wizard. Depending on your hard drive configuration, several options are\n"
"available.\n"
"\n"
" * \"Use free space\": this option will simply lead to an automatic\n"
"partitioning of your blank drive(s). You will not be prompted further;\n"
"\n"
" * \"Use existing partition\": the wizard has detected one or more existing\n"
"Linux partitions on your hard drive. If you want to use them, choose this\n"
"option. You will then be asked to choose the mount points associated to\n"
"each of the partitions. The legacy mount points are selected by default,\n"
"and you should generally keep them.\n"
"\n"
" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
"installed on your hard drive and takes all the space available on it, you\n"
"have to create free space for Linux data. To do so, you can delete your\n"
"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
"be performed without the loss of any data, provided you previously\n"
"defragment the Windows partition. Backing up your data won't hurt either..\n"
"This solution is recommended if you want to use both Mandrake Linux and\n"
"Microsoft Windows on the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than at the present time. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software;\n"
"\n"
" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
"present on your hard drive and replace them with your new Mandrake Linux\n"
"system, choose this option. Be careful with this solution because you will\n"
"not be able to revert your choice after you confirm;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Remove Windows\": this will simply erase everything on the drive and\n"
"begin fresh, partitioning everything from scratch. All data on your disk\n"
"will be lost;\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"Expert mode\": choose this option if you want to manually partition\n"
"your hard drive. Be careful -- it is a powerful but dangerous option. You\n"
"can very easily lose all your data. Hence, do not choose this unless you\n"
"know what you are doing. To know how to use the DiskDrake utility used\n"
"here, refer to the section ``Managing Your Partitions'' of the ````Starter\n"
"Guide''''"
msgstr ""

#: ../../help.pm_.c:347
msgid ""
"There you are. Installation is now completed and your GNU/Linux system is\n"
"ready to use. Just click \"OK\" to reboot the system. You can start\n"
"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
"soon as the computer has booted up again.\n"
"\n"
"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
"\n"
" * \"generate auto-install floppy\": to create an installation floppy disk\n"
"which will automatically perform a whole installation without the help of\n"
"an operator, similar to the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"Replay\". This is a partially automated installation as the\n"
"partitioning step (and only this one) remains interactive;\n"
"\n"
"    * \"Automated\". Fully automated installation: the hard disk is\n"
"completely rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a great number of similar\n"
"machines. See the Auto install section on our web site;\n"
"\n"
" * \"Save packages selection\"(*): saves the package selection as done\n"
"previously. Then, when doing another installation, insert the floppy inside\n"
"the drive and run the installation going to the help screen by pressing on\n"
"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
"\n"
"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
"\"mformat a:\")"
msgstr ""

#: ../../help.pm_.c:378
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a filesystem on it).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"OK\" when you are ready to format partitions.\n"
"\n"
"Click on \"Cancel\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
"for bad blocks on the disk."
msgstr ""

#: ../../help.pm_.c:404
msgid ""
"Your new Mandrake Linux operating system is currently being installed.\n"
"Depending on the number of packages you will be installing and the speed of\n"
"your computer, this operation could take from a few minutes to a\n"
"significant amount of time.\n"
"\n"
"Please be patient."
msgstr ""

#: ../../help.pm_.c:412
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages have been updated since the initial release. Some bugs may have\n"
"been fixed, and security issues solved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Choose\n"
"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
"to install updated packages later.\n"
"\n"
"Choosing \"Yes\" displays a list of places from which updates can be\n"
"retrieved. Choose the one nearest you. Then a package-selection tree\n"
"appears: review the selection, and press \"Install\" to retrieve and\n"
"install the selected package(s), or \"Cancel\" to abort."
msgstr ""

#: ../../help.pm_.c:425
#, fuzzy
msgid ""
"Before continuing, you should read carefully the terms of the license. It\n"
"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
"all the terms included in it, click on the \"Refuse\" button which will\n"
"immediately terminate the installation. To continue with the installation,\n"
"click on the \"Accept\" button."
msgstr ""
"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
"installasie stop sit. Om met die installasie voort te gaan kliek op die "
"Aanvaar\n"
"knoppie."

#: ../../help.pm_.c:432
msgid ""
"At this point, it is time to choose the security level desired for the\n"
"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
"the data stored in it is crucial, the higher the security level should be.\n"
"However, a higher security level is generally obtained at the expense of\n"
"ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n"
"get more information about the meaning of these levels.\n"
"\n"
"If you do not know what to choose, keep the default option."
msgstr ""

#: ../../help.pm_.c:442
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or from another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"Clear all\": this option deletes all partitions on the selected hard\n"
"drive;\n"
"\n"
" * \"Auto allocate\": this option enables to automatically create ext3 and\n"
"swap partitions on your hard drive's free space;\n"
"\n"
"\"More\": gives access to additional features:\n"
"\n"
" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
"for later partition-table recovery, if necessary. It is strongly\n"
"recommended to perform this step;\n"
"\n"
" * \"Restore partition table\": allows to restore a previously saved\n"
"partition table from a floppy disk;\n"
"\n"
" * \"Rescue partition table\": if your partition table is damaged, you can\n"
"try to recover it using this option. Please be careful and remember that it\n"
"can fail;\n"
"\n"
" * \"Reload partition table\": discards all changes and loads your initial\n"
"partition table;\n"
"\n"
" * \"Removable media automounting\": unchecking this option will force\n"
"users to manually mount and unmount removable medias such as floppies and\n"
"CD-ROMs.\n"
"\n"
" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
"your hard drive. This is recommended if you do not have a good knowledge of\n"
"partitioning;\n"
"\n"
" * \"Undo\": use this option to cancel your changes;\n"
"\n"
" * \"Toggle to normal/expert mode\": allows additional actions on\n"
"partitions (type, options, format) and gives more information;\n"
"\n"
" * \"Done\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
"\n"
" * Ctrl-d to delete a partition;\n"
"\n"
" * Ctrl-m to set the mount point.\n"
"\n"
"To get information about the different filesystem types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

#: ../../help.pm_.c:513
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: ../../help.pm_.c:544
msgid "Please be patient. This operation can take several minutes."
msgstr ""

#: ../../help.pm_.c:547
#, fuzzy
msgid ""
"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
"installation or if you want to have greater control (\"Expert\") over your\n"
"installation. You can also choose to do a new installation or upgrade your\n"
"existing Mandrake Linux system:\n"
"\n"
" * \"Install\": completely wipes out the old system. However, depending on\n"
"what is currently installed on your machine, you may be able to keep some\n"
"old partitions (Linux or otherwise) unchanged;\n"
"\n"
" * \"Upgrade\": this installation class allows to simply update the\n"
"packages currently installed on your Mandrake Linux system. It keeps your\n"
"hard drives' current partitions as well as user configurations. All other\n"
"configuration steps remain available, similar to a normal installation;\n"
"\n"
" * \"Upgrade Packages Only\": this new installation class allows you to\n"
"upgrade an existing Mandrake Linux system while keeping all system\n"
"configurations unchanged. Adding new packages to the current installation\n"
"is also possible.\n"
"\n"
"Upgrades should work fine on Mandrake Linux systems using version \"8.1\"\n"
"or later.\n"
"\n"
"Depending on your GNU/Linux knowledge, select one of the following choices:\n"
"\n"
" * Recommended: choose this if you have never installed a GNU/Linux\n"
"operating system. The installation will be very easy and you will only be\n"
"asked a few questions;\n"
"\n"
" * Expert: if you have a good GNU/Linux understanding, you may wish to\n"
"perform a highly customized installation. Some of the decisions you will\n"
"have to make may be difficult if you do not have good GNU/Linux knowledge,\n"
"so it is not recommended that those without a fair amount of experience\n"
"select this installation class."
msgstr "Kies asb. "

#: ../../help.pm_.c:582
msgid ""
"Normally, DrakX selects the right keyboard for you (depending on the\n"
"language you have chosen). However, you might not have a keyboard that\n"
"corresponds exactly to your language: for example, if you are an English\n"
"speaking Swiss person, you may still want your keyboard to be a Swiss\n"
"keyboard. Or if you speak English but are located in Quebec, you may find\n"
"yourself in the same situation. In both cases, you will have to go back to\n"
"this installation step and select an appropriate keyboard from the list.\n"
"\n"
"Click on the \"More\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-latin alphabet, you will be\n"
"asked in the next dialog to choose the key binding that will switch the\n"
"keyboard layout between the latin and non-latin layouts."
msgstr ""

#: ../../help.pm_.c:598
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Please choose your preferred language for installation and system usage.\n"
"\n"
"Clicking on the \"Advanced\" button will allow you to select other\n"
"languages to be installed on your workstation. Selecting other languages\n"
"will install the language-specific files for system documentation and\n"
"applications. For example, if you host users from Spain on your machine,\n"
"select English as the main language in the tree view and in the Advanced\n"
"section, click on the box corresponding to \"Spanish|Spain\".\n"
"\n"
"Note that multiple languages may be installed. Once you have selected any\n"
"additional locales, click the \"OK\" button to continue.\n"
"\n"
"To switch from one language to the other, you can launch the\n"
"\"/usr/sbin/localedrake\" command as \"root\" to change the whole system\n"
"language, or as a simple user to only change that user's default language."
msgstr ""

#: ../../help.pm_.c:617
msgid ""
"DrakX generally detects the number of buttons your mouse possesses. If not,\n"
"it assumes you have a two-button mouse and will set it up for third-button\n"
"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
"USB mouse.\n"
"\n"
"If you wish to specify a different type of mouse, select the appropriate\n"
"type from the provided list.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct. If the mouse is not working well, press the space bar or [Return]\n"
"to \"Cancel\" and choose again.\n"
"\n"
"Sometimes, wheel mouses are not automatically detected. You will need to\n"
"manually select it in the list. Be sure to select the one corresponding to\n"
"the correct port it is attached to. After you have pressed the \"OK\"\n"
"button, a mouse image will be displayed. You then need to move the wheel of\n"
"your mouse to activate it correctly. Then test that all buttons and\n"
"movements are correct."
msgstr ""

#: ../../help.pm_.c:638
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
"ttyS0 onder GNU/Linux is."

#: ../../help.pm_.c:642
msgid ""
"This is the most crucial decision in regards with the security of your\n"
"GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the\n"
"system administrator and is the only one authorized to make updates, add\n"
"users, change the overall system configuration, and so on. In short,\n"
"\"root\" can do everything! That is why you must choose a password that is\n"
"difficult to guess -- DrakX will tell you if it is too easy. As you can\n"
"see, you can choose not to enter a password, but we strongly advise you\n"
"against this if only for one reason: do not think that because you booted\n"
"GNU/Linux that your other operating systems are safe from mistakes. Since\n"
"\"root\" can overcome all limitations and unintentionally erase all data on\n"
"partitions by carelessly accessing the partitions themselves, it is\n"
"important for it to be difficult to become \"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it too\n"
"easy to compromise a system.\n"
"\n"
"However, please do not make the password too long or complicated because\n"
"you must be able to remember it without too much effort.\n"
"\n"
"The password will not be displayed on screen as you type it in. Hence, you\n"
"will have to type the password twice to reduce the chance of a typing\n"
"error. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will have to be used the first time you connect.\n"
"\n"
"In Expert mode, you will be asked if you will be connecting to an\n"
"authentication server, like NIS or LDAP.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one as \"authentication\". If you have no\n"
"clue, ask your network administrator.\n"
"\n"
"If your computer is not connected to any administrated network, you will\n"
"want to choose \"Local files\" for authentication."
msgstr ""

#: ../../help.pm_.c:678
msgid ""
"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
"accordingly, depending on what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
"OS;\n"
"\n"
" * if a grub or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"if in doubt, DrakX will display a dialog with various options.\n"
"\n"
" * \"Bootloader to use\": you have three choices:\n"
"\n"
"    * \"GRUB\": if you prefer grub (text menu);\n"
"\n"
"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
"interface;\n"
"\n"
"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
"interface.\n"
"\n"
" * \"Boot device\": in most cases, you will not change the default\n"
"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
"\n"
" * \"Delay before booting the default image\": when rebooting the computer,\n"
"this is the delay granted to the user to choose -- in the bootloader menu,\n"
"another boot entry than the default one.\n"
"\n"
"!! Beware that if you choose not to install a bootloader (by selecting\n"
"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
"Linux system! Also, be sure you know what you do before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
"options, which are reserved for the expert user."
msgstr ""

#: ../../help.pm_.c:718
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options which will be available at boot time will be displayed.\n"
"\n"
"If there is another operating system installed on your machine, it will\n"
"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
"the existing options. Select an entry and click \"Modify\" to modify or\n"
"remove it. \"Add\" creates a new entry. and \"Done\" goes on to the next\n"
"installation step.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone. In which case, you can delete the corresponding entries. But then,\n"
"you will need a boot disk in order to boot those other operating systems!"
msgstr ""
"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
"enige ander\n"
"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
"\n"
"\n"
"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
"nodige\n"
"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
"betrokke bedryfstelsels te laai."

#: ../../help.pm_.c:732
msgid ""
"You must indicate where you wish to place the information required to boot\n"
"GNU/Linux.\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of drive\n"
"(MBR)\"."
msgstr ""
"U moet aandui waar u die informasie om Linux te herlaai, wil plaas.\n"
"\n"
"\n"
"Behalwe as u werklik weet wat u doen moet u \"Eerste sektor van skyf (MBR)\" "
"kies."

#: ../../help.pm_.c:739
msgid ""
"Here, we select a printing system for your computer. Other OSes may offer\n"
"you one, but Mandrake Linux offers two.\n"
"\n"
" * \"pdq\" -- which means ``print, don't queue'', is the choice if you have\n"
"a direct connection to your printer and you want to be able to panic out of\n"
"printer jams, and you do not have networked printers. It will handle only\n"
"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
"if this is your first voyage to GNU/Linux. You can change your choices\n"
"after installation by running PrinterDrake from the Mandrake Control Center\n"
"and clicking the expert button.\n"
"\n"
" * \"CUPS\" -- ``Common Unix Printing System'', is excellent at printing to\n"
"your local printer and also halfway-around the planet. It is simple and can\n"
"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
"it is compatible with the systems that went before. It can do many tricks,\n"
"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
"graphical front-ends for printing or choosing printer options."
msgstr ""

#: ../../help.pm_.c:759
#, fuzzy
msgid ""
"DrakX now detects any IDE device present in your computer. It will also\n"
"scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection does not always detect a piece of hardware,\n"
"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
"if you know that there is a SCSI card installed in your machine. You will\n"
"be presented with a list of SCSI cards to choose from. Click \"No\" if you\n"
"have no SCSI hardware. If you are unsure, you can check the list of\n"
"hardware detected in your machine by selecting \"See hardware info\" and\n"
"clicking \"OK\". Examine the hardware list and then click on the \"OK\"\n"
"button to return to the SCSI interface question.\n"
"\n"
"If you have to manually specify your adapter, DrakX will ask if you want to\n"
"specify options for it. You should allow DrakX to probe the hardware for\n"
"the card-specific options which the hardware needs to initialize. This\n"
"usually works well.\n"
"\n"
"If DrakX is not able to probe for the options which need to be passed, you\n"
"will need to manually provide options to the driver."
msgstr ""
"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
"dit outomaties installeer word.\n"
"\n"
"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
"\n"
"\n"
"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
"spesifiekeopsies.\n"
"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
"gewoonlik die beste.\n"
"\n"
"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
"Windows-bedryfstelsel te bekom.\n"
"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."

#: ../../help.pm_.c:781
msgid ""
"You can add additional entries for yaboot, either for other operating\n"
"systems, alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSes, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is simply the name you will have to type at the yaboot\n"
"prompt to select this boot option;\n"
"\n"
" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
"or a variation of vmlinux with an extension;\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
"\n"
" * Append: on Apple hardware, the kernel append option is used quite often\n"
"to assist in initializing video hardware, or to enable keyboard mouse\n"
"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
"Apple mouse. The following are some examples:\n"
"\n"
"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules, before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation;\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
"need to allocate a large ramdisk, this option can be used;\n"
"\n"
" * Read-write: normally the \"root\" partition is initially brought up in\n"
"read-only, to allow a filesystem check before the system becomes ``live''.\n"
"Here, you can override this option;\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support;\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
"selections."
msgstr ""

#: ../../help.pm_.c:828
msgid ""
"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
"these other operating systems are correctly detected and installed. If this\n"
"is not the case, you can add an entry by hand in this screen. Be careful to\n"
"choose the correct parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt;\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information;\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second before your\n"
"default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt;\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt;\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: ../../help.pm_.c:860
msgid ""
"Here are presented various parameters concerning your machine. Depending on\n"
"your installed hardware, you may (or may not), see the following entries:\n"
"\n"
" * \"Mouse\": check the current mouse configuration and click on the button\n"
"to change it if necessary;\n"
"\n"
" * \"Keyboard\": check the current keyboard map configuration and click on\n"
"the button to change that if necessary;\n"
"\n"
" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
"language you have chosen. But here again, as for the choice of a keyboard,\n"
"you may not be in the country for which the chosen language should\n"
"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
"order to configure the clock according to the time zone you are in;\n"
"\n"
" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
"configuration wizard. Consult the correpsonding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used at installation time;\n"
"\n"
" * \"Sound card\": if a sound card is detected on your system, it will be\n"
"displayed here.\n"
"\n"
" * \"TV card\": if a TV card is detected on your system, it will be\n"
"displayed here.\n"
"\n"
" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on the button to change the parameters\n"
"associated to it."
msgstr ""

#: ../../help.pm_.c:891
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
"and will not be recoverable!"
msgstr ""

#: ../../help.pm_.c:896
msgid ""
"Click on \"OK\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"Cancel\" to stop this operation without losing any data and\n"
"partitions present on this hard drive."
msgstr ""

#: ../../install2.pm_.c:111
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: ../../install2.pm_.c:167
#, c-format
msgid "You must also format %s"
msgstr ""

#: ../../install_any.pm_.c:423
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new could be found. In that case, you must make sure to "
"upgrade\n"
"as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: ../../install_any.pm_.c:441
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""

#: ../../install_any.pm_.c:471
msgid "Can't use broadcast with no NIS domain"
msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"

#: ../../install_any.pm_.c:879
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"

#: ../../install_any.pm_.c:883
msgid "This floppy is not FAT formatted"
msgstr "Hierdie floppie is nie in FAT-formaat nie"

#: ../../install_any.pm_.c:895
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
"\"linux defcfg=floppy\""

#: ../../install_any.pm_.c:918 ../../partition_table.pm_.c:767
#, c-format
msgid "Error reading file %s"
msgstr "Fout met die les van l�er %s"

#: ../../install_any.pm_.c:1040
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"'n Fout het voorgekom - geen geldige toestelle om die nuwe l�erstelsels op "
"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."

#: ../../install_interactive.pm_.c:21
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
" U kan inligting hieroorvind by %s"

#: ../../install_interactive.pm_.c:56
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"U moet 'n wortelpartisie definieer.\n"
"Skep 'n partisie of kliek op 'n bestaande een.\n"
"Kies dan Hegpunt en stel dit dan '/'."

#: ../../install_interactive.pm_.c:61
msgid "You must have a swap partition"
msgstr "U moet oor 'n ruilpartisie beskik"

#: ../../install_interactive.pm_.c:62
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"U het nie 'n ruilpartisie nie\n"
"\n"
"Wil u steeds voortgaan?"

#: ../../install_interactive.pm_.c:65 ../../install_steps.pm_.c:169
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"

#: ../../install_interactive.pm_.c:90
msgid "Use free space"
msgstr "Gebruik beskikbare spasie"

#: ../../install_interactive.pm_.c:92
msgid "Not enough free space to allocate new partitions"
msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"

#: ../../install_interactive.pm_.c:100
msgid "Use existing partitions"
msgstr "Gebruik bestaande partisies"

#: ../../install_interactive.pm_.c:102
msgid "There is no existing partition to use"
msgstr "Daar is geen bestaande partisies om te gebruik nie"

#: ../../install_interactive.pm_.c:109
msgid "Use the Windows partition for loopback"
msgstr "Gebruik vir die Windows-partisie vir teruglus"

#: ../../install_interactive.pm_.c:112
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Watter partisie wil u vir Linux4Win gebruik?"

#: ../../install_interactive.pm_.c:114
msgid "Choose the sizes"
msgstr "Kies die groottes"

#: ../../install_interactive.pm_.c:115
msgid "Root partition size in MB: "
msgstr "Basispartisiegrootte in MB:"

#: ../../install_interactive.pm_.c:116
msgid "Swap partition size in MB: "
msgstr "Ruilpartisiegrootte in MB: "

#: ../../install_interactive.pm_.c:126
msgid "Use the free space on the Windows partition"
msgstr "Gebruik die beskikbare spasie op die Windowspartisie"

#: ../../install_interactive.pm_.c:129
msgid "Which partition do you want to resize?"
msgstr "Watter partisie se grootte wil u verander?"

#: ../../install_interactive.pm_.c:131
msgid "Resizing Windows partition"
msgstr "Windowsl�erstelselgrense word bereken"

#: ../../install_interactive.pm_.c:134
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""
"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
"Fout: %s"

#: ../../install_interactive.pm_.c:137
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."

#: ../../install_interactive.pm_.c:138
#, fuzzy
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful:\n"
"this operation is dangerous. If you have not already done\n"
"so, you should first exit the installation, run scandisk\n"
"under Windows (and optionally run defrag), then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"WAARSKUWING\n"
"\n"
"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
"installasie\n"
"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
"na\n"
"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
"OK."

#: ../../install_interactive.pm_.c:148
msgid "Which size do you want to keep for Windows on"
msgstr "Watter grootte wil u vir Windows behou?"

#: ../../install_interactive.pm_.c:149
#, c-format
msgid "partition %s"
msgstr "partisie %s"

#: ../../install_interactive.pm_.c:156
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT-grootteverandering het gefaal: %s"

#: ../../install_interactive.pm_.c:171
msgid ""
"There is no FAT partition to resize or to use as loopback (or not enough "
"space left)"
msgstr ""
"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
"spasie nie) te gebruik nie"

#: ../../install_interactive.pm_.c:177
msgid "Erase entire disk"
msgstr "Wis hele skyf"

#: ../../install_interactive.pm_.c:177
msgid "Remove Windows(TM)"
msgstr "Verwyder Windows(TM)"

#: ../../install_interactive.pm_.c:180
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"

#: ../../install_interactive.pm_.c:183
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"

#: ../../install_interactive.pm_.c:191
msgid "Custom disk partitioning"
msgstr "Gespesialiseerde skyfpartisionering"

#: ../../install_interactive.pm_.c:195
msgid "Use fdisk"
msgstr "Gebruik fdisk"

#: ../../install_interactive.pm_.c:198
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
"U het nou partisie %s partisioneer.\n"
"Wanneer u klaar is, stoor u veranderinge met 'w'."

#: ../../install_interactive.pm_.c:227
msgid "You don't have enough free space on your Windows partition"
msgstr "Die Windowspartisie beskik nie oor die nodige spasie nie."

#: ../../install_interactive.pm_.c:243
msgid "I can't find any room for installing"
msgstr "Ek kon geen plek vir installasie vind nie."

#: ../../install_interactive.pm_.c:246
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"

#: ../../install_interactive.pm_.c:250
#, c-format
msgid "Partitioning failed: %s"
msgstr "Partisionering het misluk: %s"

#: ../../install_interactive.pm_.c:260
msgid "Bringing up the network"
msgstr "Netwerk op pad op"

#: ../../install_interactive.pm_.c:265
msgid "Bringing down the network"
msgstr "Netwerk op pad af"

#: ../../install_steps.pm_.c:76
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
"nie. Gaan op u eie risiko voort."

#: ../../install_steps.pm_.c:211
#, c-format
msgid "Duplicate mount point %s"
msgstr "Duplikaat hegpunt %s"

#: ../../install_steps.pm_.c:380
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Sekere belangrike pakkette het nie korrek ge�nstalleer nie.\n"
"�f die CDROM-aandrywer �f die CD is foutief.\n"
"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
"rpm\"\n"

#: ../../install_steps.pm_.c:450
#, c-format
msgid "Welcome to %s"
msgstr "Welkom by %s"

#: ../../install_steps.pm_.c:543 ../../install_steps.pm_.c:769
msgid "No floppy drive available"
msgstr "Geen sagteskyaandrywer beskikbaar nie"

#: ../../install_steps_auto_install.pm_.c:76
#: ../../install_steps_stdio.pm_.c:22
#, c-format
msgid "Entering step `%s'\n"
msgstr "Gaan stap '%s' binne\n"

#: ../../install_steps_gtk.pm_.c:146
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
"die installering\n"
"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
"Daarvoor moet u\n"
"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
"instruksielyn intik."

#: ../../install_steps_gtk.pm_.c:157 ../../install_steps_interactive.pm_.c:237
msgid "Install Class"
msgstr "Installasieklas"

#: ../../install_steps_gtk.pm_.c:160
#, fuzzy
msgid "Please choose one of the following classes of installation:"
msgstr "Kies asb. een van die volgende installasieklasse:"

#: ../../install_steps_gtk.pm_.c:236 ../../install_steps_interactive.pm_.c:683
msgid "Package Group Selection"
msgstr "Kies pakketgroepe"

#: ../../install_steps_gtk.pm_.c:269 ../../install_steps_interactive.pm_.c:698
msgid "Individual package selection"
msgstr "Individuele pakketseleksie"

#: ../../install_steps_gtk.pm_.c:292 ../../install_steps_interactive.pm_.c:621
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Totale grootte: %d / %d MB"

#: ../../install_steps_gtk.pm_.c:334
msgid "Bad package"
msgstr "Foutiewe pakket"

#: ../../install_steps_gtk.pm_.c:335
#, c-format
msgid "Name: %s\n"
msgstr "Naam: %s\n"

#: ../../install_steps_gtk.pm_.c:336
#, c-format
msgid "Version: %s\n"
msgstr "Weergawe: %s\n"

#: ../../install_steps_gtk.pm_.c:337
#, c-format
msgid "Size: %d KB\n"
msgstr "Groote: %d KB\n"

#: ../../install_steps_gtk.pm_.c:338
#, c-format
msgid "Importance: %s\n"
msgstr "Belangrikheid: %s\n"

#: ../../install_steps_gtk.pm_.c:360
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
"beskikbaar is nie"

#
#: ../../install_steps_gtk.pm_.c:365
msgid "The following packages are going to be installed"
msgstr "Die volgende pakkette gaan installeer word"

#
#: ../../install_steps_gtk.pm_.c:366
msgid "The following packages are going to be removed"
msgstr "Dei volgende pakkette gaan verwyder word"

#: ../../install_steps_gtk.pm_.c:378
msgid "You can't select/unselect this package"
msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"

#: ../../install_steps_gtk.pm_.c:390
msgid "This is a mandatory package, it can't be unselected"
msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."

#: ../../install_steps_gtk.pm_.c:392
msgid "You can't unselect this package. It is already installed"
msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge�nstalleer"

#: ../../install_steps_gtk.pm_.c:395
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Hierdie pakket moet opgradeer word\n"
"Is u seker u wil dit deselekteer?"

#: ../../install_steps_gtk.pm_.c:398
msgid "You can't unselect this package. It must be upgraded"
msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."

#: ../../install_steps_gtk.pm_.c:403
msgid "Show automatically selected packages"
msgstr "Wys outogeselekteerde pakkette."

#: ../../install_steps_gtk.pm_.c:404 ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#: ../../standalone/drakbackup_.c:4211
msgid "Install"
msgstr "Installasie"

#: ../../install_steps_gtk.pm_.c:407
msgid "Load/Save on floppy"
msgstr "Laai/Stoor op floppie"

#: ../../install_steps_gtk.pm_.c:408
msgid "Updating package selection"
msgstr "Pakketseleksie word opgedateer"

#: ../../install_steps_gtk.pm_.c:413
msgid "Minimal install"
msgstr "Minimale installasie"

#: ../../install_steps_gtk.pm_.c:428 ../../install_steps_interactive.pm_.c:529
msgid "Choose the packages you want to install"
msgstr "Kies die pakkette wat u wil installeer"

#: ../../install_steps_gtk.pm_.c:444 ../../install_steps_interactive.pm_.c:767
msgid "Installing"
msgstr "Besig met installasie"

#: ../../install_steps_gtk.pm_.c:450
msgid "Estimating"
msgstr "Skatting"

#: ../../install_steps_gtk.pm_.c:457
msgid "Time remaining "
msgstr "Tyd oor "

#: ../../install_steps_gtk.pm_.c:469
msgid "Please wait, preparing installation..."
msgstr "Wag asb. installasie word voorberei"

#: ../../install_steps_gtk.pm_.c:551
#, c-format
msgid "%d packages"
msgstr "%d pakkette"

#: ../../install_steps_gtk.pm_.c:556
#, c-format
msgid "Installing package %s"
msgstr "Installeer pakket %s"

#
#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:791
#: ../../standalone/drakautoinst_.c:197
msgid "Accept"
msgstr "Aanvaar "

#
#: ../../install_steps_gtk.pm_.c:593 ../../install_steps_interactive.pm_.c:195
#: ../../install_steps_interactive.pm_.c:791
msgid "Refuse"
msgstr "Weier"

#: ../../install_steps_gtk.pm_.c:594 ../../install_steps_interactive.pm_.c:792
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Verander u CDROM!\n"
"\n"
"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
"nie\n"
"hieroor beskik nie, druk Kanselleer om installasies vanaf di� CDROM te vermy."

#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_gtk.pm_.c:612
#: ../../install_steps_interactive.pm_.c:804
#: ../../install_steps_interactive.pm_.c:808
msgid "Go on anyway?"
msgstr "Gaan steeds voort?"

#: ../../install_steps_gtk.pm_.c:608 ../../install_steps_interactive.pm_.c:804
msgid "There was an error ordering packages:"
msgstr "Daar was 'n fout met pakkette:"

#: ../../install_steps_gtk.pm_.c:612 ../../install_steps_interactive.pm_.c:808
msgid "There was an error installing packages:"
msgstr "Daar was 'n fout met die installasie van die pakkette:"

#: ../../install_steps_interactive.pm_.c:10
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:67
msgid "An error occurred"
msgstr "'n Fout het voorgekom"

#: ../../install_steps_interactive.pm_.c:85
#, fuzzy
msgid "Do you really want to leave the installation?"
msgstr "Wil u die werklik die drukker verwyder?"

#: ../../install_steps_interactive.pm_.c:112
msgid "License agreement"
msgstr "Lisensieooreenkoms"

#: ../../install_steps_interactive.pm_.c:113
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:197
msgid "Are you sure you refuse the licence?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:217
#: ../../install_steps_interactive.pm_.c:995
#: ../../standalone/keyboarddrake_.c:25
msgid "Keyboard"
msgstr "Sleutelbord"

#: ../../install_steps_interactive.pm_.c:218
#, fuzzy
msgid "Please choose your keyboard layout."
msgstr "Wat is u sleutelborduitleg?"

#: ../../install_steps_interactive.pm_.c:219
msgid "Here is the full list of keyboards available"
msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"

#: ../../install_steps_interactive.pm_.c:237
msgid "Which installation class do you want?"
msgstr "Watter installasieklas verlang u?"

#: ../../install_steps_interactive.pm_.c:241
msgid "Install/Update"
msgstr "Installeer/Opgradeer"

#: ../../install_steps_interactive.pm_.c:241
msgid "Is this an install or an update?"
msgstr "Is hierdie 'n installasie of opgradering?"

#: ../../install_steps_interactive.pm_.c:250
msgid "Recommended"
msgstr "Aanbevole"

#: ../../install_steps_interactive.pm_.c:253
#: ../../install_steps_interactive.pm_.c:256
msgid "Expert"
msgstr "Kundige"

#: ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#, fuzzy
msgid "Upgrade"
msgstr "Opgradeer"

#: ../../install_steps_interactive.pm_.c:261
#: ../../install_steps_interactive.pm_.c:265
#, fuzzy
msgid "Upgrade packages only"
msgstr "Pakketseleksie word opgedateer"

#: ../../install_steps_interactive.pm_.c:282
#, fuzzy
msgid "Please choose the type of your mouse."
msgstr "Wat is u muistoestel?"

#: ../../install_steps_interactive.pm_.c:288 ../../standalone/mousedrake_.c:52
msgid "Mouse Port"
msgstr "Muispoort"

#: ../../install_steps_interactive.pm_.c:289 ../../standalone/mousedrake_.c:53
msgid "Please choose on which serial port your mouse is connected to."
msgstr "Aan watter seriaalpoort is u muis gekoppel?"

#: ../../install_steps_interactive.pm_.c:297
msgid "Buttons emulation"
msgstr "Knoppie-emulasie"

#: ../../install_steps_interactive.pm_.c:299
msgid "Button 2 Emulation"
msgstr "Knop-2 Emulasie"

#: ../../install_steps_interactive.pm_.c:300
msgid "Button 3 Emulation"
msgstr "Knop-3 emulasie"

#: ../../install_steps_interactive.pm_.c:321
msgid "Configuring PCMCIA cards..."
msgstr "Stel PCMCIA op..."

#: ../../install_steps_interactive.pm_.c:321
msgid "PCMCIA"
msgstr "PCMCIA"

#: ../../install_steps_interactive.pm_.c:328
msgid "Configuring IDE"
msgstr "IDE word opgestel"

#: ../../install_steps_interactive.pm_.c:328
msgid "IDE"
msgstr "IDE"

#: ../../install_steps_interactive.pm_.c:345
msgid "No partition available"
msgstr "geen beskikbare partisies"

#: ../../install_steps_interactive.pm_.c:348
msgid "Scanning partitions to find mount points"
msgstr "Hegpunte vir partisies word nou gesoek"

#: ../../install_steps_interactive.pm_.c:356
msgid "Choose the mount points"
msgstr "Kies die hegpunte"

#: ../../install_steps_interactive.pm_.c:386
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
"herlaai."

#: ../../install_steps_interactive.pm_.c:395
msgid "No root partition found to perform an upgrade"
msgstr "Geen wortell�erstelsel gevind nie"

#: ../../install_steps_interactive.pm_.c:396
msgid "Root Partition"
msgstr "Basispartisie"

#: ../../install_steps_interactive.pm_.c:397
msgid "What is the root partition (/) of your system?"
msgstr "Wat is die basispartisie (/) van u stelsel?"

#: ../../install_steps_interactive.pm_.c:411
msgid "You need to reboot for the partition table modifications to take place"
msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"

#: ../../install_steps_interactive.pm_.c:435
msgid "Choose the partitions you want to format"
msgstr "Kies die partisies om te formatteer"

#: ../../install_steps_interactive.pm_.c:436
msgid "Check bad blocks?"
msgstr "Toets vir foutiewe areas?"

#: ../../install_steps_interactive.pm_.c:463
msgid "Formatting partitions"
msgstr "Partisies word formateer"

#: ../../install_steps_interactive.pm_.c:465
#, c-format
msgid "Creating and formatting file %s"
msgstr "L�er %s word geskep en formatteer"

#: ../../install_steps_interactive.pm_.c:470
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can loose data)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:472
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."

#: ../../install_steps_interactive.pm_.c:479
#, fuzzy
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Soek vir beskikbare pakkette"

#: ../../install_steps_interactive.pm_.c:480
msgid "Looking for available packages..."
msgstr "Soek vir beskikbare pakkette"

#: ../../install_steps_interactive.pm_.c:483
#, fuzzy
msgid "Looking at packages already installed..."
msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds ge�nstalleer"

#: ../../install_steps_interactive.pm_.c:487
msgid "Finding packages to upgrade..."
msgstr "Soek vir pakkette om op te gradeer."

#: ../../install_steps_interactive.pm_.c:505
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"

#: ../../install_steps_interactive.pm_.c:541
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
"Die formaat is dieselfde as outoinstallasie-genereerde floppies."

#: ../../install_steps_interactive.pm_.c:543
msgid "Load from floppy"
msgstr "Laai vanaf floppie"

#: ../../install_steps_interactive.pm_.c:543
msgid "Save on floppy"
msgstr "Stoor op floppie"

#: ../../install_steps_interactive.pm_.c:547
msgid "Loading from floppy"
msgstr "Oplaai vanaf floppie"

#: ../../install_steps_interactive.pm_.c:547
msgid "Package selection"
msgstr "Pakketkeuse"

#: ../../install_steps_interactive.pm_.c:552
msgid "Insert a floppy containing package selection"
msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "

#: ../../install_steps_interactive.pm_.c:634
msgid "Selected size is larger than available space"
msgstr "Geselekteerde grootte is groter as beskikbare spasie."

#: ../../install_steps_interactive.pm_.c:649
#, fuzzy
msgid "Type of install"
msgstr "Kies pakket om te installeer"

#: ../../install_steps_interactive.pm_.c:650
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""

#: ../../install_steps_interactive.pm_.c:653
#, fuzzy
msgid "With X"
msgstr "Wag"

#: ../../install_steps_interactive.pm_.c:655
msgid "With basic documentation (recommended!)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:656
msgid "Truly minimal install (especially no urpmi)"
msgstr ""

#: ../../install_steps_interactive.pm_.c:741
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."

#: ../../install_steps_interactive.pm_.c:746
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "CDROM getiteld \"%s\""

#: ../../install_steps_interactive.pm_.c:767
msgid "Preparing installation"
msgstr "Berei installasie voor"

#: ../../install_steps_interactive.pm_.c:776
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Installeer nou pakket %s\n"
"%d%%"

#: ../../install_steps_interactive.pm_.c:822
msgid "Post-install configuration"
msgstr "Postinstallasiekonfigurasie"

#: ../../install_steps_interactive.pm_.c:828
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"

#: ../../install_steps_interactive.pm_.c:834
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"

#: ../../install_steps_interactive.pm_.c:861
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been released after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""

#: ../../install_steps_interactive.pm_.c:876
#, fuzzy
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr "Spie�l word gekontak vir die lys van pakkette"

#: ../../install_steps_interactive.pm_.c:881
msgid "Choose a mirror from which to get the packages"
msgstr "Kies 'n spie�l waar die pakkette verkry kan word"

#: ../../install_steps_interactive.pm_.c:890
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Spie�l word gekontak vir die lys van pakkette"

#: ../../install_steps_interactive.pm_.c:918
msgid "Which is your timezone?"
msgstr "Wat is u tydsone?"

#: ../../install_steps_interactive.pm_.c:923
msgid "Hardware clock set to GMT"
msgstr "Hardewareklok gestel vir GMT"

#: ../../install_steps_interactive.pm_.c:924
msgid "Automatic time synchronization (using NTP)"
msgstr "Outotydsinkronisasie met NTP"

#: ../../install_steps_interactive.pm_.c:931
msgid "NTP Server"
msgstr "NTP-bediener"

#
#: ../../install_steps_interactive.pm_.c:965
#: ../../install_steps_interactive.pm_.c:972
msgid "Remote CUPS server"
msgstr "Verwyder CUPS-bediener"

#: ../../install_steps_interactive.pm_.c:966
msgid "No printer"
msgstr "Geen drukker"

#: ../../install_steps_interactive.pm_.c:982
#, fuzzy
msgid "Do you have an ISA sound card?"
msgstr "Beskik u oor nog?"

#: ../../install_steps_interactive.pm_.c:984
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""

#: ../../install_steps_interactive.pm_.c:986
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""

#: ../../install_steps_interactive.pm_.c:991 ../../steps.pm_.c:27
msgid "Summary"
msgstr "Opsomming"

#: ../../install_steps_interactive.pm_.c:994
msgid "Mouse"
msgstr "Muis"

#: ../../install_steps_interactive.pm_.c:996
msgid "Timezone"
msgstr "Tydsone"

#: ../../install_steps_interactive.pm_.c:997
#: ../../printer/printerdrake.pm_.c:2759 ../../printer/printerdrake.pm_.c:2844
msgid "Printer"
msgstr "Drukker"

#: ../../install_steps_interactive.pm_.c:999
msgid "ISDN card"
msgstr "ISDN-kaart"

#: ../../install_steps_interactive.pm_.c:1003
#: ../../install_steps_interactive.pm_.c:1009
msgid "Sound card"
msgstr "Klankkaart"

#: ../../install_steps_interactive.pm_.c:1012
msgid "TV card"
msgstr "TV-kaaer"

#: ../../install_steps_interactive.pm_.c:1055
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1084
msgid "LDAP"
msgstr "KDAP"

#: ../../install_steps_interactive.pm_.c:1056
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1093
msgid "NIS"
msgstr "NIS"

#: ../../install_steps_interactive.pm_.c:1057
#: ../../install_steps_interactive.pm_.c:1080
#: ../../install_steps_interactive.pm_.c:1101
#: ../../install_steps_interactive.pm_.c:1107
#, fuzzy
msgid "Windows Domain"
msgstr "NIS-domein"

#: ../../install_steps_interactive.pm_.c:1058
#: ../../install_steps_interactive.pm_.c:1080
msgid "Local files"
msgstr "Plaaslike l�ers"

#: ../../install_steps_interactive.pm_.c:1067
#: ../../install_steps_interactive.pm_.c:1068 ../../steps.pm_.c:24
msgid "Set root password"
msgstr "Kies 'root' se wagwoord"

#: ../../install_steps_interactive.pm_.c:1069
msgid "No password"
msgstr "Geen wagwoord"

#: ../../install_steps_interactive.pm_.c:1074
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."

#: ../../install_steps_interactive.pm_.c:1080 ../../network/modem.pm_.c:72
#: ../../standalone/drakconnect_.c:623 ../../standalone/logdrake_.c:144
msgid "Authentication"
msgstr "Magtiging"

#: ../../install_steps_interactive.pm_.c:1088
msgid "Authentication LDAP"
msgstr "LDAP-magtiging"

#: ../../install_steps_interactive.pm_.c:1089
msgid "LDAP Base dn"
msgstr "LDAP Basis-dn"

#: ../../install_steps_interactive.pm_.c:1090
msgid "LDAP Server"
msgstr "LDAP-bediener"

#: ../../install_steps_interactive.pm_.c:1096
msgid "Authentication NIS"
msgstr "NIS-magtiging"

#: ../../install_steps_interactive.pm_.c:1097
msgid "NIS Domain"
msgstr "NIS-domein"

#: ../../install_steps_interactive.pm_.c:1098
msgid "NIS Server"
msgstr "NIS-bediener"

#: ../../install_steps_interactive.pm_.c:1104
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1106
#, fuzzy
msgid "Authentication Windows Domain"
msgstr "LDAP-magtiging"

#: ../../install_steps_interactive.pm_.c:1108
#, fuzzy
msgid "Domain Admin User Name"
msgstr "Domeinnaam"

#: ../../install_steps_interactive.pm_.c:1109
msgid "Domain Admin Password"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1144
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"SILO on your system, or another operating system removes SILO, or SILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures.\n"
"\n"
"If you want to create a bootdisk for your system, insert a floppy in the "
"first\n"
"drive and press \"Ok\"."
msgstr ""
"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
"ernstige stelselfalings te herstel.\n"
"\n"
"Indien u 'n herlaaiskyf wil maak,\n"
"plaas 'n skyf in die aandrywer en druk \"OK\"."

#: ../../install_steps_interactive.pm_.c:1160
msgid "First floppy drive"
msgstr "Eerste sagteskyfaandrywer"

#: ../../install_steps_interactive.pm_.c:1161
msgid "Second floppy drive"
msgstr "Tweede sagteskyfaandrywer"

#: ../../install_steps_interactive.pm_.c:1162
#: ../../printer/printerdrake.pm_.c:2397
msgid "Skip"
msgstr "Mis hierdie stap"

#: ../../install_steps_interactive.pm_.c:1167
#, c-format
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO (or grub) on your system, or another operating system removes LILO, or "
"LILO doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?\n"
"%s"
msgstr ""
"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
"LILO\n"
"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
"%s"

#: ../../install_steps_interactive.pm_.c:1173
msgid ""
"\n"
"\n"
"(WARNING! You're using XFS for your root partition,\n"
"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
"because XFS needs a very large driver)."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1181
msgid "Sorry, no floppy drive available"
msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"

#: ../../install_steps_interactive.pm_.c:1185
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"

#: ../../install_steps_interactive.pm_.c:1189
#, fuzzy, c-format
msgid "Insert a floppy in %s"
msgstr "Sit 'n skyf in aandrywer %s"

#: ../../install_steps_interactive.pm_.c:1192
msgid "Creating bootdisk..."
msgstr "Herlaaiskyf word geskryf"

#: ../../install_steps_interactive.pm_.c:1199
msgid "Preparing bootloader..."
msgstr "Herlaaistelsel word voorberei"

#: ../../install_steps_interactive.pm_.c:1210
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX to boot your machine"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1216
msgid "Do you want to use aboot?"
msgstr "Wil u aboot gebruik?"

#: ../../install_steps_interactive.pm_.c:1219
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
"word die eerste partisie vernietig?"

#: ../../install_steps_interactive.pm_.c:1226
msgid "Installing bootloader"
msgstr "Herlaaistelselinstallasie"

#: ../../install_steps_interactive.pm_.c:1232
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "

#: ../../install_steps_interactive.pm_.c:1240
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: ../../install_steps_interactive.pm_.c:1274
#: ../../standalone/drakautoinst_.c:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Sit 'n le� floppie in aandrywer %s"

#: ../../install_steps_interactive.pm_.c:1278
msgid "Creating auto install floppy..."
msgstr "Outoinstallasieskyf word geskep."

#: ../../install_steps_interactive.pm_.c:1289
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Bepaalde stappe is nie afgehandel nie.\n"
"\n"
"Wil u werklik nou aborteer?"

#: ../../install_steps_interactive.pm_.c:1300
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Geluk, installasie is afgehandel.\n"
"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
"\n"
"\n"
"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
"bekyk die errata beskikbaar op\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
"hoofstuk in die Offisi�le Liux-Mandrake Gebruikersgids."

#: ../../install_steps_interactive.pm_.c:1313
msgid "http://www.mandrakelinux.com/en/90errata.php3"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1318
msgid "Generate auto install floppy"
msgstr "Skep outoinstallasieskyf"

#: ../../install_steps_interactive.pm_.c:1320
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""

#: ../../install_steps_interactive.pm_.c:1325
msgid "Automated"
msgstr "Outomaties"

#: ../../install_steps_interactive.pm_.c:1325
msgid "Replay"
msgstr "Herspeel"

#: ../../install_steps_interactive.pm_.c:1328
msgid "Save packages selection"
msgstr "Stoor pakketseleksie"

#: ../../install_steps_newt.pm_.c:20
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux Installasie %s"

#. -PO This string must fit in a 80-char wide text screen
#: ../../install_steps_newt.pm_.c:33
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "

#: ../../interactive.pm_.c:87
msgid "kdesu missing"
msgstr "kdesu is weg"

#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
msgid "consolehelper missing"
msgstr ""

#: ../../interactive.pm_.c:152
msgid "Choose a file"
msgstr "Kies 'n l�er"

#: ../../interactive.pm_.c:318
msgid "Advanced"
msgstr "Gevorderd"

#: ../../interactive.pm_.c:319 ../../security/main.pm_.c:117
msgid "Basic"
msgstr ""

#: ../../interactive/newt.pm_.c:194 ../../my_gtk.pm_.c:158
#: ../../printer/printerdrake.pm_.c:2055 ../../ugtk2.pm_.c:434
msgid "<- Previous"
msgstr "<- Vorige"

#: ../../interactive/newt.pm_.c:194 ../../interactive/newt.pm_.c:196
#: ../../standalone/drakbackup_.c:4060 ../../standalone/drakbackup_.c:4087
#: ../../standalone/drakbackup_.c:4117 ../../standalone/drakbackup_.c:4143
#, fuzzy
msgid "Next"
msgstr "Teks"

#: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:149
msgid "Bad choice, try again\n"
msgstr "Swak keuse, probeer weer\n"

#: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:150
#, c-format
msgid "Your choice? (default %s) "
msgstr "U keuse? (verstek %s) "

#: ../../interactive/stdio.pm_.c:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""

#: ../../interactive/stdio.pm_.c:70
#, fuzzy, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "U keuse? (verstek %s) "

#: ../../interactive/stdio.pm_.c:95
#, fuzzy, c-format
msgid "Button `%s': %s"
msgstr "Opsies: %s"

#: ../../interactive/stdio.pm_.c:96
#, fuzzy
msgid "Do you want to click on this button?"
msgstr "Wil u aboot gebruik?"

#: ../../interactive/stdio.pm_.c:105
msgid " enter `void' for void entry"
msgstr ""

#: ../../interactive/stdio.pm_.c:105
#, fuzzy, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "U keuse? (verstek %s) "

#: ../../interactive/stdio.pm_.c:123
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""

#: ../../interactive/stdio.pm_.c:126
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: ../../interactive/stdio.pm_.c:139
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: ../../interactive/stdio.pm_.c:146
msgid "Re-submit"
msgstr ""

#: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:188
msgid "Czech (QWERTZ)"
msgstr "Tseggies (QWERTZ)"

#: ../../keyboard.pm_.c:154 ../../keyboard.pm_.c:190
msgid "German"
msgstr "Duits"

#: ../../keyboard.pm_.c:155
msgid "Dvorak"
msgstr "Dvorak"

#: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198
msgid "Spanish"
msgstr "Spaans"

#: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199
msgid "Finnish"
msgstr "Finnies"

#: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:200
msgid "French"
msgstr "Frans"

#: ../../keyboard.pm_.c:159 ../../keyboard.pm_.c:233
msgid "Norwegian"
msgstr "Norweegs"

#: ../../keyboard.pm_.c:160
msgid "Polish"
msgstr "Pools"

#: ../../keyboard.pm_.c:161 ../../keyboard.pm_.c:241
msgid "Russian"
msgstr "Russies"

#: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:243
msgid "Swedish"
msgstr "Sweeds"

#: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:259
msgid "UK keyboard"
msgstr "VK sleutelbord"

#: ../../keyboard.pm_.c:165 ../../keyboard.pm_.c:260
msgid "US keyboard"
msgstr "VSA sleutelbord"

#: ../../keyboard.pm_.c:167
msgid "Albanian"
msgstr "Albanies"

#: ../../keyboard.pm_.c:168
msgid "Armenian (old)"
msgstr "Armenies (oud)"

#: ../../keyboard.pm_.c:169
msgid "Armenian (typewriter)"
msgstr "Armenies (tikmasjien)"

#: ../../keyboard.pm_.c:170
msgid "Armenian (phonetic)"
msgstr "Armenies (Foneties)"

#: ../../keyboard.pm_.c:175
msgid "Azerbaidjani (latin)"
msgstr "Azerbaidjani (latyns)"

#: ../../keyboard.pm_.c:177
msgid "Belgian"
msgstr "Belgies"

#: ../../keyboard.pm_.c:178
#, fuzzy
msgid "Bengali"
msgstr "Aktiveer"

#: ../../keyboard.pm_.c:179
#, fuzzy
msgid "Bulgarian (phonetic)"
msgstr "Armenies (Foneties)"

#: ../../keyboard.pm_.c:180
#, fuzzy
msgid "Bulgarian (BDS)"
msgstr "Bulgaars"

#: ../../keyboard.pm_.c:181
msgid "Brazilian (ABNT-2)"
msgstr "Brasiliaans (ABNT-2)"

#: ../../keyboard.pm_.c:184
#, fuzzy
msgid "Bosnian"
msgstr "Estoniaans"

#: ../../keyboard.pm_.c:185
msgid "Belarusian"
msgstr "Belarussies"

#: ../../keyboard.pm_.c:186
msgid "Swiss (German layout)"
msgstr "Switsers (Duitse uitleg)"

#: ../../keyboard.pm_.c:187
msgid "Swiss (French layout)"
msgstr "Switsers (Franse uitleg)"

#: ../../keyboard.pm_.c:189
msgid "Czech (QWERTY)"
msgstr "Tseggies (QWERTY)"

#: ../../keyboard.pm_.c:191
msgid "German (no dead keys)"
msgstr "Duits (geen dooie sleutels)"

#: ../../keyboard.pm_.c:192
msgid "Devanagari"
msgstr ""

#: ../../keyboard.pm_.c:193
msgid "Danish"
msgstr "Deens"

#: ../../keyboard.pm_.c:194
msgid "Dvorak (US)"
msgstr "Dvorak (VSA)"

#: ../../keyboard.pm_.c:195
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norweegs)"

#: ../../keyboard.pm_.c:196
#, fuzzy
msgid "Dvorak (Swedish)"
msgstr "Dvorak (VSA)"

#: ../../keyboard.pm_.c:197
msgid "Estonian"
msgstr "Estoniaans"

#: ../../keyboard.pm_.c:201
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgies (Russiese uitleg)"

#: ../../keyboard.pm_.c:202
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgies (Latynse uitleg)"

#: ../../keyboard.pm_.c:203
msgid "Greek"
msgstr "Grieks"

#: ../../keyboard.pm_.c:204
msgid "Gujarati"
msgstr ""

#: ../../keyboard.pm_.c:205
msgid "Gurmukhi"
msgstr ""

#: ../../keyboard.pm_.c:206
msgid "Hungarian"
msgstr "Hongaars"

#: ../../keyboard.pm_.c:207
msgid "Croatian"
msgstr "Kroaties"

#: ../../keyboard.pm_.c:208
msgid "Israeli"
msgstr "Israelies"

#: ../../keyboard.pm_.c:209
msgid "Israeli (Phonetic)"
msgstr "Israelies (Foneties)"

#: ../../keyboard.pm_.c:210
msgid "Iranian"
msgstr "Iranies"

#: ../../keyboard.pm_.c:211
msgid "Icelandic"
msgstr "Yslandies"

#: ../../keyboard.pm_.c:212
msgid "Italian"
msgstr "Italiaans"

#: ../../keyboard.pm_.c:213
msgid "Inuktitut"
msgstr ""

#: ../../keyboard.pm_.c:214
msgid "Japanese 106 keys"
msgstr "Japanees 106 sleutels"

#: ../../keyboard.pm_.c:217
msgid "Korean keyboard"
msgstr "Koreaanse sleutelbord"

#: ../../keyboard.pm_.c:218
msgid "Latin American"
msgstr "Latyns-Amerikaans"

#: ../../keyboard.pm_.c:219
#, fuzzy
msgid "Laotian"
msgstr "Latvies"

#: ../../keyboard.pm_.c:220
msgid "Lithuanian AZERTY (old)"
msgstr "Lituanies AZERTY (oud)"

#: ../../keyboard.pm_.c:222
msgid "Lithuanian AZERTY (new)"
msgstr "Lituanies AZERTY (nuut)"

#: ../../keyboard.pm_.c:223
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Lituanies \"nommerry\" QWERTY"

#: ../../keyboard.pm_.c:224
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Lituanies \"foneties\" QWERTY"

#: ../../keyboard.pm_.c:225
msgid "Latvian"
msgstr "Latvies"

#: ../../keyboard.pm_.c:226
msgid "Malayalam"
msgstr ""

#: ../../keyboard.pm_.c:227
msgid "Macedonian"
msgstr "Masedonies"

#: ../../keyboard.pm_.c:228
msgid "Myanmar (Burmese)"
msgstr ""

#: ../../keyboard.pm_.c:229
#, fuzzy
msgid "Mongolian (cyrillic)"
msgstr "Serwies (Kirillies)"

#: ../../keyboard.pm_.c:230
msgid "Maltese (UK)"
msgstr ""

#: ../../keyboard.pm_.c:231
msgid "Maltese (US)"
msgstr ""

#: ../../keyboard.pm_.c:232
msgid "Dutch"
msgstr "Nederlands"

#: ../../keyboard.pm_.c:234
msgid "Polish (qwerty layout)"
msgstr "Pools (QWERTY uitleg)"

#: ../../keyboard.pm_.c:235
msgid "Polish (qwertz layout)"
msgstr "Pools (QWERTZ uitleg)"

#: ../../keyboard.pm_.c:236
msgid "Portuguese"
msgstr "Portugees"

#: ../../keyboard.pm_.c:237
msgid "Canadian (Quebec)"
msgstr "Kanadees (Quebec)"

#: ../../keyboard.pm_.c:239
msgid "Romanian (qwertz)"
msgstr "Romanies (QWERTZ)"

#: ../../keyboard.pm_.c:240
msgid "Romanian (qwerty)"
msgstr "Romanies (QWERTY)"

#: ../../keyboard.pm_.c:242
msgid "Russian (Yawerty)"
msgstr "Russue (Yawerty)"

#: ../../keyboard.pm_.c:244
msgid "Slovenian"
msgstr "Sloveens"

#: ../../keyboard.pm_.c:245
msgid "Slovakian (QWERTZ)"
msgstr "Slovaaks (QWERTZ)"

#: ../../keyboard.pm_.c:246
msgid "Slovakian (QWERTY)"
msgstr "Slovaaks (QWERTY)"

#: ../../keyboard.pm_.c:248
msgid "Serbian (cyrillic)"
msgstr "Serwies (Kirillies)"

#: ../../keyboard.pm_.c:250
msgid "Tamil (Unicode)"
msgstr ""

#: ../../keyboard.pm_.c:251
msgid "Tamil (TSCII)"
msgstr ""

#: ../../keyboard.pm_.c:252
msgid "Thai keyboard"
msgstr "Thai sleutelbord"

#: ../../keyboard.pm_.c:254
msgid "Tajik keyboard"
msgstr "Tajik sleutelbord"

#: ../../keyboard.pm_.c:255
msgid "Turkish (traditional \"F\" model)"
msgstr "Turks (tradisionele \"F\" model)"

#: ../../keyboard.pm_.c:256
msgid "Turkish (modern \"Q\" model)"
msgstr "Turks (moderne \"Q\" modem)"

#: ../../keyboard.pm_.c:258
msgid "Ukrainian"
msgstr "Ukranies"

#: ../../keyboard.pm_.c:261
msgid "US keyboard (international)"
msgstr "VSA internasionale sleutelbord"

#: ../../keyboard.pm_.c:262
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Vi�tnamees \"nommerry\" QWERTY"

#: ../../keyboard.pm_.c:263
msgid "Yugoslavian (latin)"
msgstr "Jugoslaavs (latynse uitleg)"

#: ../../keyboard.pm_.c:270
msgid "Right Alt key"
msgstr ""

#: ../../keyboard.pm_.c:271
msgid "Both Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:272
msgid "Control and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:273
msgid "CapsLock key"
msgstr ""

#: ../../keyboard.pm_.c:274
msgid "Ctrl and Alt keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:275
msgid "Alt and Shift keys simultaneously"
msgstr ""

#: ../../keyboard.pm_.c:276
msgid "\"Menu\" key"
msgstr ""

#: ../../keyboard.pm_.c:277
msgid "Left \"Windows\" key"
msgstr ""

#: ../../keyboard.pm_.c:278
msgid "Right \"Windows\" key"
msgstr ""

#: ../../loopback.pm_.c:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Sirkul�re heg %s\n"

#: ../../lvm.pm_.c:103
msgid "Remove the logical volumes first\n"
msgstr "Verwyder eers die logiese volumes\n"

#: ../../modules.pm_.c:290
msgid ""
"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
msgstr ""

#: ../../modules/interactive.pm_.c:16
msgid "You can configure each parameter of the module here."
msgstr ""

#: ../../modules/parameters.pm_.c:18
#, fuzzy
msgid "modinfo is not available"
msgstr "Geen sagteskyaandrywer beskikbaar nie"

#: ../../modules/parameters.pm_.c:50
#, fuzzy
msgid "a number"
msgstr "Telefoonnommer"

#: ../../modules/parameters.pm_.c:52
#, c-format
msgid "%d comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm_.c:52
#, c-format
msgid "%d comma separated strings"
msgstr ""

#: ../../modules/parameters.pm_.c:54
msgid "comma separated numbers"
msgstr ""

#: ../../modules/parameters.pm_.c:54
#, fuzzy
msgid "comma separated strings"
msgstr "Formateer partisies"

#: ../../mouse.pm_.c:25
msgid "Sun - Mouse"
msgstr "Sun - Muis"

#: ../../mouse.pm_.c:32
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: ../../mouse.pm_.c:33
msgid "Generic PS2 Wheel Mouse"
msgstr "Generiese PS2 wielmuis"

#: ../../mouse.pm_.c:34
msgid "GlidePoint"
msgstr "GlidePoint"

#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: ../../mouse.pm_.c:38
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48
#, fuzzy
msgid "Microsoft Explorer"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70
msgid "1 button"
msgstr "1 knop"

#: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53
msgid "Generic 2 Button Mouse"
msgstr "Generiese 2-knop muis"

#
#: ../../mouse.pm_.c:47
msgid "Wheel"
msgstr "Wiel"

#: ../../mouse.pm_.c:51
msgid "serial"
msgstr "seriaal"

#: ../../mouse.pm_.c:54
msgid "Generic 3 Button Mouse"
msgstr "Generiese 3-knop muis"

#: ../../mouse.pm_.c:55
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: ../../mouse.pm_.c:56
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: ../../mouse.pm_.c:57
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: ../../mouse.pm_.c:59
msgid "Logitech CC Series"
msgstr "Logitech CC Reeks (seriaal)"

#: ../../mouse.pm_.c:60
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: ../../mouse.pm_.c:62
msgid "MM Series"
msgstr "MM Series"

#: ../../mouse.pm_.c:63
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: ../../mouse.pm_.c:64
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Muis (seriaal, ou C7 tipe)"

#: ../../mouse.pm_.c:68
msgid "busmouse"
msgstr "busmuis"

#: ../../mouse.pm_.c:71
msgid "2 buttons"
msgstr "2 knoppies"

#: ../../mouse.pm_.c:72
msgid "3 buttons"
msgstr "3 knoppies"

#: ../../mouse.pm_.c:75
msgid "none"
msgstr "niks"

#: ../../mouse.pm_.c:77
msgid "No mouse"
msgstr "Geen muis"

#
#: ../../mouse.pm_.c:490
msgid "Please test the mouse"
msgstr "Toets asb. die muis"

#
#: ../../mouse.pm_.c:491
msgid "To activate the mouse,"
msgstr "Om die muis te aktiveer"

#: ../../mouse.pm_.c:492
msgid "MOVE YOUR WHEEL!"
msgstr "BEWEEG DIE WIEL!"

#: ../../my_gtk.pm_.c:65
#, fuzzy
msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../my_gtk.pm_.c:159 ../../ugtk2.pm_.c:435
msgid "Finish"
msgstr "Finnies"

#: ../../my_gtk.pm_.c:159 ../../printer/printerdrake.pm_.c:2057
#: ../../ugtk2.pm_.c:435
msgid "Next ->"
msgstr "Volgende ->"

#: ../../my_gtk.pm_.c:287 ../../ugtk2.pm_.c:926
msgid "Is this correct?"
msgstr "Is dit korrek?"

#: ../../my_gtk.pm_.c:359 ../../services.pm_.c:227 ../../ugtk2.pm_.c:1011
msgid "Info"
msgstr "Info"

#: ../../my_gtk.pm_.c:380 ../../ugtk2.pm_.c:1036
msgid "Expand Tree"
msgstr "Maak boom oop"

#: ../../my_gtk.pm_.c:381 ../../ugtk2.pm_.c:1037
msgid "Collapse Tree"
msgstr "Maak boom toe"

#: ../../my_gtk.pm_.c:382 ../../ugtk2.pm_.c:1038
msgid "Toggle between flat and group sorted"
msgstr "Skakel tussen plat- en groepsortering"

#: ../../network/adsl.pm_.c:23
msgid "use pppoe"
msgstr "gebruik pppoe"

#: ../../network/adsl.pm_.c:24
msgid "use pptp"
msgstr "gebruik pptp"

#: ../../network/adsl.pm_.c:25
msgid "use dhcp"
msgstr "gebruik dhcp"

#: ../../network/adsl.pm_.c:26
#, fuzzy
msgid "Alcatel speedtouch usb"
msgstr "speedtouch USB"

#: ../../network/adsl.pm_.c:27
msgid "Sagem (using pppoe) usb"
msgstr ""

#: ../../network/adsl.pm_.c:29 ../../network/ethernet.pm_.c:36
msgid "Connect to the Internet"
msgstr "Konnekteer aan die internet"

#: ../../network/adsl.pm_.c:30
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few ones use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
"Indien u nie weet nie, kies 'gebruik pppoe'."

#: ../../network/adsl.pm_.c:166
msgid ""
"You need the alcatel microcode.\n"
"Download it at\n"
"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""

#: ../../network/drakfirewall.pm_.c:12
#, fuzzy
msgid "Web Server"
msgstr "Bediener"

#: ../../network/drakfirewall.pm_.c:17
#, fuzzy
msgid "Domain Name Server"
msgstr "Domeinnaam"

#: ../../network/drakfirewall.pm_.c:32
#, fuzzy
msgid "Mail Server"
msgstr "Datbasis"

#: ../../network/drakfirewall.pm_.c:37
#, fuzzy
msgid "POP and IMAP Server"
msgstr "LDAP-bediener"

#: ../../network/drakfirewall.pm_.c:111
#, fuzzy
msgid "No network card"
msgstr "geen netwerkkaart gevind nie"

#: ../../network/drakfirewall.pm_.c:129
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""

#: ../../network/drakfirewall.pm_.c:135
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: ../../network/drakfirewall.pm_.c:152
msgid "Which services would you like to allow the Internet to connect to?"
msgstr ""

#: ../../network/drakfirewall.pm_.c:153
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""

#: ../../network/drakfirewall.pm_.c:159
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535."
msgstr ""

#: ../../network/drakfirewall.pm_.c:167
msgid "Everything (no firewall)"
msgstr ""

#: ../../network/drakfirewall.pm_.c:169
#, fuzzy
msgid "Other ports"
msgstr "Toets poorte"

#: ../../network/ethernet.pm_.c:37
msgid ""
"Which dhcp client do you want to use?\n"
"Default is dhcp-client"
msgstr ""
"Watter DCHP-kli�nt wil u gebruik?\n"
"Verstek is dhcp-client"

#: ../../network/ethernet.pm_.c:88
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Geen ethernetkaart is op die stelsel gevind nie.\n"
"Ek kan nie hierdie konneksietipe opstel nie."

#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:234
msgid "Choose the network interface"
msgstr "Kies die netwerkkoppelvlak"

#: ../../network/ethernet.pm_.c:93
msgid ""
"Please choose which network adapter you want to use to connect to Internet"
msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."

#: ../../network/ethernet.pm_.c:176
msgid "no network card found"
msgstr "geen netwerkkaart gevind nie"

#: ../../network/ethernet.pm_.c:200 ../../network/network.pm_.c:349
msgid "Configuring network"
msgstr "Stel netwerk op"

#: ../../network/ethernet.pm_.c:201
msgid ""
"Please enter your host name if you know it.\n"
"Some DHCP servers require the hostname to work.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''."
msgstr ""
"Tik asb die rekenaarnaam in.\n"
"Sekere DHCP-bedieners benodig die rekenaarnaam.\n"
"Dit moet 'n volle gekwalifiseerde naam wees,\n"
"bv. ``myne.mywerk.co.za''."

#
#: ../../network/ethernet.pm_.c:205 ../../network/network.pm_.c:354
msgid "Host name"
msgstr "Rekenaarnaam"

#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
#: ../../network/netconnect.pm_.c:89 ../../network/netconnect.pm_.c:103
#: ../../network/netconnect.pm_.c:156 ../../network/netconnect.pm_.c:171
#: ../../network/netconnect.pm_.c:222 ../../network/netconnect.pm_.c:245
#: ../../network/netconnect.pm_.c:253
msgid "Network Configuration Wizard"
msgstr "Netwerkkonfigurasie-assistent"

#: ../../network/isdn.pm_.c:22
msgid "External ISDN modem"
msgstr "Eksterne ISDN-kaart"

#: ../../network/isdn.pm_.c:22
msgid "Internal ISDN card"
msgstr "Interne ISDN-kaart"

#: ../../network/isdn.pm_.c:22
msgid "What kind is your ISDN connection?"
msgstr "Watter tipe is u ISDN-konneksie?"

#: ../../network/isdn.pm_.c:45
msgid ""
"Which ISDN configuration do you prefer?\n"
"\n"
"* The Old configuration uses isdn4net. It contains powerful\n"
"  tools, but is tricky to configure, and not standard.\n"
"\n"
"* The New configuration is easier to understand, more\n"
"  standard, but with less tools.\n"
"\n"
"We recommand the light configuration.\n"
msgstr ""

#: ../../network/isdn.pm_.c:54
msgid "New configuration (isdn-light)"
msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"

#: ../../network/isdn.pm_.c:54
msgid "Old configuration (isdn4net)"
msgstr "Ou konfigurasie (isdn4net)"

#: ../../network/isdn.pm_.c:166 ../../network/isdn.pm_.c:184
#: ../../network/isdn.pm_.c:196 ../../network/isdn.pm_.c:202
#: ../../network/isdn.pm_.c:209 ../../network/isdn.pm_.c:219
msgid "ISDN Configuration"
msgstr "ISDN Konfigurasie"

#: ../../network/isdn.pm_.c:166
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Kies u internetdiensvoorsiener.\n"
"Indien nie in die lys nie kies Ongelys"

#: ../../network/isdn.pm_.c:179
msgid "Europe protocol"
msgstr "Europese protokol"

#: ../../network/isdn.pm_.c:179
msgid "Europe protocol (EDSS1)"
msgstr "Europese protokol (EDSS1)"

#
#: ../../network/isdn.pm_.c:181
msgid "Protocol for the rest of the world"
msgstr "Protokol vir die res van die w�reld"

#: ../../network/isdn.pm_.c:181
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Protokol vir die res vd w�reld \n"
" geen D-Kanaal nie (bruikhuurlyne)"

#: ../../network/isdn.pm_.c:185
msgid "Which protocol do you want to use?"
msgstr "Watter protokol verlang u?"

#: ../../network/isdn.pm_.c:196
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""

#: ../../network/isdn.pm_.c:203
msgid "What kind of card do you have?"
msgstr "Oor watter tipe kaart beskik u?"

#: ../../network/isdn.pm_.c:204
msgid "I don't know"
msgstr "Ek weet nie"

#: ../../network/isdn.pm_.c:204
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: ../../network/isdn.pm_.c:204
msgid "PCI"
msgstr "PCI"

#: ../../network/isdn.pm_.c:210
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
"wees.\n"
"\n"
"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"

#: ../../network/isdn.pm_.c:214
msgid "Abort"
msgstr "Aborteer"

#: ../../network/isdn.pm_.c:214
msgid "Continue"
msgstr "Gaan voort"

#: ../../network/isdn.pm_.c:220
msgid "Which is your ISDN card?"
msgstr "Wat is u ISDN-kaart?"

#: ../../network/isdn.pm_.c:239
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
"PCI-kaart op die volgende skerm."

#: ../../network/isdn.pm_.c:248
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."

#: ../../network/modem.pm_.c:57
msgid "Please choose which serial port your modem is connected to."
msgstr "Op watter seriaalpoort is u modem gekoppel?"

#: ../../network/modem.pm_.c:67
msgid "Dialup options"
msgstr "Opbelopsies"

#: ../../network/modem.pm_.c:68 ../../standalone/drakconnect_.c:619
msgid "Connection name"
msgstr "Konneksienaam"

#: ../../network/modem.pm_.c:69 ../../standalone/drakconnect_.c:620
msgid "Phone number"
msgstr "Telefoonnommer"

#: ../../network/modem.pm_.c:70 ../../standalone/drakconnect_.c:621
msgid "Login ID"
msgstr "Aantekenkode"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "CHAP"
msgstr "CHAP"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "PAP"
msgstr "PAP"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "Script-based"
msgstr "Skriptipe"

#: ../../network/modem.pm_.c:72 ../../standalone/drakconnect_.c:623
msgid "Terminal-based"
msgstr "Terminaaltipe"

#: ../../network/modem.pm_.c:73 ../../standalone/drakconnect_.c:624
msgid "Domain name"
msgstr "Domeinnaam"

#: ../../network/modem.pm_.c:74 ../../standalone/drakconnect_.c:625
msgid "First DNS Server (optional)"
msgstr "Eerste DNS-bediener (opsioneel)"

#: ../../network/modem.pm_.c:75 ../../standalone/drakconnect_.c:626
msgid "Second DNS Server (optional)"
msgstr "Tweede DNS-bediener (opsioneel)"

#: ../../network/modem.pm_.c:95
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""

#: ../../network/modem.pm_.c:97
#, c-format
msgid ""
"\"%s\" based winmodem detected, do you want to install needed software ?"
msgstr ""

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Do nothing"
msgstr "CUPS word gelaai"

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Install rpm"
msgstr "Installasie"

#: ../../network/modem.pm_.c:97
#, fuzzy
msgid "Title"
msgstr "Tabel"

#: ../../network/netconnect.pm_.c:29
msgid ""
"\n"
"You can disconnect or reconfigure your connection."
msgstr ""
"\n"
"U kan diskonnekteer or herkonfigureer."

#: ../../network/netconnect.pm_.c:29 ../../network/netconnect.pm_.c:32
msgid ""
"\n"
"You can reconfigure your connection."
msgstr ""
"\n"
"U kan u konneksie herkonfigureer."

#: ../../network/netconnect.pm_.c:29
msgid "You are currently connected to internet."
msgstr "U is tans aan die internet gekonnekteer."

#: ../../network/netconnect.pm_.c:32
msgid ""
"\n"
"You can connect to Internet or reconfigure your connection."
msgstr ""
"\n"
"U kan aan die internet konnekter of u konneksie herkonfigureer."

#: ../../network/netconnect.pm_.c:32
msgid "You are not currently connected to Internet."
msgstr "U is nie tans aan die internet gekonnekteer nie."

#: ../../network/netconnect.pm_.c:36
msgid "Connect"
msgstr "Konnekteer"

#: ../../network/netconnect.pm_.c:37
msgid "Disconnect"
msgstr "Diskonnekteer"

#: ../../network/netconnect.pm_.c:38
#, fuzzy
msgid "Configure the connection"
msgstr "Stel netwerk op"

#: ../../network/netconnect.pm_.c:41
msgid "Internet connection & configuration"
msgstr "Internetkonneksie en konfigurasie"

#: ../../network/netconnect.pm_.c:94
#, c-format
msgid "We are now going to configure the %s connection."
msgstr "Ons gaan nou die %s konneksie herkonfigureer."

#: ../../network/netconnect.pm_.c:103
#, c-format
msgid ""
"\n"
"\n"
"\n"
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press OK to continue."
msgstr ""
"\n"
"\n"
"\n"
"Ons gan nou die %s konneksie konfigureer.\n"
"\n"
"\n"
"Drk OK om voort te gaan."

#: ../../network/netconnect.pm_.c:132 ../../network/netconnect.pm_.c:272
#: ../../network/netconnect.pm_.c:292 ../../network/tools.pm_.c:77
msgid "Network Configuration"
msgstr "Netwerkkonfigurasie"

#: ../../network/netconnect.pm_.c:133
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
"& Netwerkkonneksie te herkonfigureer.\n"

#: ../../network/netconnect.pm_.c:157
msgid ""
"Welcome to The Network Configuration Wizard.\n"
"\n"
"We are about to configure your internet/network connection.\n"
"If you don't want to use the auto detection, deselect the checkbox.\n"
msgstr ""
"Welkom by die Netwerkkonfigurasie-assistent\n"
"\n"
"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"

#: ../../network/netconnect.pm_.c:163
msgid "Choose the profile to configure"
msgstr "Kies die profiel om te konfigureer"

#: ../../network/netconnect.pm_.c:164
msgid "Use auto detection"
msgstr "Gebruik outobespeuring"

#: ../../network/netconnect.pm_.c:165 ../../printer/printerdrake.pm_.c:2966
#: ../../standalone/drakconnect_.c:271 ../../standalone/drakconnect_.c:274
#: ../../standalone/drakfloppy_.c:118
msgid "Expert Mode"
msgstr "Kundige bedryfsvlak"

#: ../../network/netconnect.pm_.c:171 ../../printer/printerdrake.pm_.c:364
msgid "Detecting devices..."
msgstr "Toestel word afgetas..."

#: ../../network/netconnect.pm_.c:214
msgid "Normal modem connection"
msgstr "Normale modemkonneksie"

#: ../../network/netconnect.pm_.c:214
#, c-format
msgid "detected on port %s"
msgstr "Op poort %s bespeur"

#: ../../network/netconnect.pm_.c:215
#, fuzzy
msgid "Winmodem connection"
msgstr "Normale modemkonneksie"

#: ../../network/netconnect.pm_.c:215 ../../network/netconnect.pm_.c:217
#, fuzzy
msgid "detected"
msgstr "%s bespeur"

#: ../../network/netconnect.pm_.c:216
msgid "ISDN connection"
msgstr "ISDN konneksie"

#: ../../network/netconnect.pm_.c:216
#, c-format
msgid "detected %s"
msgstr "%s bespeur"

#: ../../network/netconnect.pm_.c:217
msgid "ADSL connection"
msgstr "ADSL konneksie"

#: ../../network/netconnect.pm_.c:218
msgid "Cable connection"
msgstr "Kabelkonneksie"

#: ../../network/netconnect.pm_.c:218
msgid "cable connection detected"
msgstr "Kabelkonneksie bespeur"

#: ../../network/netconnect.pm_.c:219
msgid "LAN connection"
msgstr "LAN konneksie"

#: ../../network/netconnect.pm_.c:219
msgid "ethernet card(s) detected"
msgstr "ethernet kaart(e) bespeur"

#: ../../network/netconnect.pm_.c:222
msgid "Choose the connection you want to configure"
msgstr "Kies die konneksie wat u wil konfigureer"

#: ../../network/netconnect.pm_.c:246
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"U het meer as een internetkonneksiemetode opgste.\n"
"Kies die een wat u verlang.\n"
"\n"

#: ../../network/netconnect.pm_.c:247
msgid "Internet connection"
msgstr "Internetkonneksie"

#: ../../network/netconnect.pm_.c:253
msgid "Do you want to start the connection at boot?"
msgstr "Wil u die konneksie met herlaaityd aanskakel?"

#: ../../network/netconnect.pm_.c:267
msgid "Network configuration"
msgstr "Netwerkkonfigurasie"

#: ../../network/netconnect.pm_.c:268
msgid "The network needs to be restarted"
msgstr ""

#: ../../network/netconnect.pm_.c:272
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Daar was 'n probleem met die herlaai van die netwerk.\n"
"\n"
"%s"

#: ../../network/netconnect.pm_.c:282
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"The configuration will now be applied to your system.\n"
"\n"
msgstr ""
"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
"\n"
"Die kongiurasie gaan op u stelsel toegepas word.\n"

#: ../../network/netconnect.pm_.c:286
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
"om die rekenaarnaamveranderingprobleem te voorkom."

#: ../../network/netconnect.pm_.c:287
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""

#: ../../network/network.pm_.c:278
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""
"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
"konnekteer.\n"
"U kan die toestel net so aanvaar.\n"
"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."

#: ../../network/network.pm_.c:283
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
"(1.2.3.4) gegee word."

#: ../../network/network.pm_.c:293 ../../network/network.pm_.c:294
#, c-format
msgid "Configuring network device %s"
msgstr "Konfigureer netwerktoestel %s"

#: ../../network/network.pm_.c:294
#, c-format
msgid " (driver %s)"
msgstr "(drywer %s)"

#
#: ../../network/network.pm_.c:296 ../../standalone/drakconnect_.c:228
#: ../../standalone/drakconnect_.c:464
msgid "IP address"
msgstr "IP adres"

#
#: ../../network/network.pm_.c:297 ../../standalone/drakconnect_.c:465
#: ../../standalone/drakgw_.c:291
msgid "Netmask"
msgstr "Netmasker"

#: ../../network/network.pm_.c:298
msgid "(bootp/dhcp)"
msgstr "(bootp/dhcp)"

#: ../../network/network.pm_.c:298
msgid "Automatic IP"
msgstr "Outomatiese IP"

#: ../../network/network.pm_.c:299
#, fuzzy
msgid "Start at boot"
msgstr "Gelaai tydens herlaaityd"

#: ../../network/network.pm_.c:320 ../../printer/printerdrake.pm_.c:812
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-adres moet in 1.2.3.4. formaat wees"

#: ../../network/network.pm_.c:326
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0'."
msgstr ""

#: ../../network/network.pm_.c:330
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0'."
msgstr ""

#: ../../network/network.pm_.c:350
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""
"Tik asb die rekenaarnaam in.\n"
"Dit moet 'n volle gekwalifiseerde naam wees,\n"
"bv. ``myne.mywerk.co.za''.\n"
"U mag ook die netwerkhek byvoeg indien daar een is"

#: ../../network/network.pm_.c:355
msgid "DNS server"
msgstr "DNS bediener"

#: ../../network/network.pm_.c:356
#, c-format
msgid "Gateway (e.g. %s)"
msgstr ""

#: ../../network/network.pm_.c:358
msgid "Gateway device"
msgstr "Netwerkportaaltoestel"

#: ../../network/network.pm_.c:363
#, fuzzy
msgid "DNS server address should be in format 1.2.3.4"
msgstr "IP-adres moet in 1.2.3.4. formaat wees"

#: ../../network/network.pm_.c:367
#, fuzzy
msgid "Gateway address should be in format 1.2.3.4"
msgstr "IP-adres moet in 1.2.3.4. formaat wees"

#: ../../network/network.pm_.c:381
msgid "Proxies configuration"
msgstr "Instaanbedienerkonfigurasie"

#: ../../network/network.pm_.c:382
msgid "HTTP proxy"
msgstr "HTTP instaanbediener"

#: ../../network/network.pm_.c:383
msgid "FTP proxy"
msgstr "FTP instaanbediener"

#: ../../network/network.pm_.c:384
msgid "Track network card id (useful for laptops)"
msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"

#: ../../network/network.pm_.c:387
msgid "Proxy should be http://..."
msgstr "Instaanbediener moet begin met http://"

#: ../../network/network.pm_.c:388
#, fuzzy
msgid "Url should begin with 'ftp:' or 'http:'"
msgstr "Instaanbediener moet begin met http://"

#: ../../network/shorewall.pm_.c:26
msgid "Firewalling configuration detected!"
msgstr "Vuurmuurkonfigurasie gevind!"

#: ../../network/shorewall.pm_.c:27
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fix after installation."
msgstr ""
"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
"dietyd self regstellings moet aanbring."

#: ../../network/tools.pm_.c:57
msgid "Internet configuration"
msgstr "Internetkonfigurasie"

#: ../../network/tools.pm_.c:58
msgid "Do you want to try to connect to the Internet now?"
msgstr "Wil u nou aan die internet konnekteer?"

#: ../../network/tools.pm_.c:61 ../../standalone/drakconnect_.c:193
msgid "Testing your connection..."
msgstr "Konneksie word getoets..."

#: ../../network/tools.pm_.c:70
msgid "The system is now connected to Internet."
msgstr "Die stelsel is nou aan die internet gekonnekteer."

#: ../../network/tools.pm_.c:71
msgid "For security reason, it will be disconnected now."
msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."

#: ../../network/tools.pm_.c:72
msgid ""
"The system doesn't seem to be connected to internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
"Probeer om u stelsel te herkonfigureer."

#
#: ../../network/tools.pm_.c:96
msgid "Connection Configuration"
msgstr "Konneksiekonfigurasie"

#: ../../network/tools.pm_.c:97
msgid "Please fill or check the field below"
msgstr "Vul asb. die velde hieronder in"

#: ../../network/tools.pm_.c:99 ../../standalone/drakconnect_.c:605
msgid "Card IRQ"
msgstr "Kaart IRQ"

#: ../../network/tools.pm_.c:100 ../../standalone/drakconnect_.c:606
msgid "Card mem (DMA)"
msgstr "Kaartgeheue (DMA)"

#: ../../network/tools.pm_.c:101 ../../standalone/drakconnect_.c:607
msgid "Card IO"
msgstr "Kaart I/O"

#: ../../network/tools.pm_.c:102 ../../standalone/drakconnect_.c:608
msgid "Card IO_0"
msgstr "Kaart IO_0"

#: ../../network/tools.pm_.c:103 ../../standalone/drakconnect_.c:609
msgid "Card IO_1"
msgstr "Kaart IO_1"

#: ../../network/tools.pm_.c:104 ../../standalone/drakconnect_.c:610
msgid "Your personal phone number"
msgstr "U persoonlike telefoonnommer"

#: ../../network/tools.pm_.c:105 ../../standalone/drakconnect_.c:611
msgid "Provider name (ex provider.net)"
msgstr "Voorsienernaam (bv voorsiener.co.za)"

#: ../../network/tools.pm_.c:106 ../../standalone/drakconnect_.c:612
msgid "Provider phone number"
msgstr "Voorsiener se telefoonnommer"

#: ../../network/tools.pm_.c:107 ../../standalone/drakconnect_.c:613
msgid "Provider dns 1 (optional)"
msgstr "Voorsiener DNS 1 (opsioneel)"

#: ../../network/tools.pm_.c:108 ../../standalone/drakconnect_.c:614
msgid "Provider dns 2 (optional)"
msgstr "Voorsiener DNS 2 (opsioneel)"

#: ../../network/tools.pm_.c:109
msgid "Choose your country"
msgstr "Kies u land"

#: ../../network/tools.pm_.c:110 ../../standalone/drakconnect_.c:617
msgid "Dialing mode"
msgstr "Belmetode"

#: ../../network/tools.pm_.c:111 ../../standalone/drakconnect_.c:629
msgid "Connection speed"
msgstr "Konneksiespoed"

#: ../../network/tools.pm_.c:112 ../../standalone/drakconnect_.c:630
msgid "Connection timeout (in sec)"
msgstr "Konneksie tydlimiet (in sekondes)"

#: ../../network/tools.pm_.c:113 ../../standalone/drakconnect_.c:615
msgid "Account Login (user name)"
msgstr "Gebruikerskode"

#: ../../network/tools.pm_.c:114 ../../standalone/drakconnect_.c:616
#: ../../standalone/drakconnect_.c:647
msgid "Account Password"
msgstr "Wagwoord"

#: ../../network/tools.pm_.c:118 ../../network/tools.pm_.c:132
msgid "United Kingdom"
msgstr ""

#: ../../partition_table.pm_.c:603
msgid "mount failed: "
msgstr "heg het gefaal"

#: ../../partition_table.pm_.c:667
msgid "Extended partition not supported on this platform"
msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"

#: ../../partition_table.pm_.c:685
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
"Die enigste oplossing is om die prim�re partisie te skuif sodat die gat\n"
"langs die ekstensie partisies is"

#: ../../partition_table.pm_.c:774
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Herstel van l�er %s het gefaal: %s"

#: ../../partition_table.pm_.c:776
msgid "Bad backup file"
msgstr "Korrupte rugsteunl�er"

#: ../../partition_table.pm_.c:796
#, c-format
msgid "Error writing to file %s"
msgstr "Fout in die skryf van %s"

#: ../../partition_table/raw.pm_.c:192
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random trash"
msgstr ""
"Iets vrots gebeur op u hardeskyf.\n"
"'n Dataintegriteitstoets het misluk.\n"
"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
"eindig."

#: ../../pkgs.pm_.c:26
msgid "must have"
msgstr "benodig"

#: ../../pkgs.pm_.c:27
msgid "important"
msgstr "belangrik"

#: ../../pkgs.pm_.c:28
msgid "very nice"
msgstr "baie oulik"

#: ../../pkgs.pm_.c:29
msgid "nice"
msgstr "oulik"

#: ../../pkgs.pm_.c:30
msgid "maybe"
msgstr "moontlik"

#: ../../printer/data.pm_.c:18
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Druk sonder drukkertou"

#: ../../printer/data.pm_.c:19
msgid "PDQ"
msgstr "PDQ"

#: ../../printer/data.pm_.c:30
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Lyndrukkerdiensprogram"

#: ../../printer/data.pm_.c:31
msgid "LPD"
msgstr "LPD"

#: ../../printer/data.pm_.c:51
msgid "LPRng - LPR New Generation"
msgstr "LPRng - Nuwe generasie LPR"

#: ../../printer/data.pm_.c:52
msgid "LPRng"
msgstr "LPRng"

#: ../../printer/data.pm_.c:75
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "

#: ../../printer/data.pm_.c:76 ../../printer/main.pm_.c:677
msgid "CUPS"
msgstr "CUPS"

#: ../../printer/detect.pm_.c:80 ../../printer/detect.pm_.c:213
#: ../../printer/detect.pm_.c:250
#, fuzzy
msgid "Unknown Model"
msgstr "Onbekende model"

#: ../../printer/main.pm_.c:26
msgid "Local printer"
msgstr "Plaaslike drukker"

#
#: ../../printer/main.pm_.c:27
msgid "Remote printer"
msgstr "Eksterne drukker"

#
#: ../../printer/main.pm_.c:28
msgid "Printer on remote CUPS server"
msgstr "Eksterne CUPS-drukker"

#
#: ../../printer/main.pm_.c:29 ../../printer/printerdrake.pm_.c:835
msgid "Printer on remote lpd server"
msgstr "Eksterne LPD-drukker"

#
#: ../../printer/main.pm_.c:30
#, fuzzy
msgid "Network printer (TCP/Socket)"
msgstr "Netwerkdrukker (sok)"

#: ../../printer/main.pm_.c:31
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "Eksterne SMB/Windows 95/98/NT-drukker"

#: ../../printer/main.pm_.c:32
msgid "Printer on NetWare server"
msgstr "Eksterne Netware-drukker"

#: ../../printer/main.pm_.c:33 ../../printer/printerdrake.pm_.c:839
msgid "Enter a printer device URI"
msgstr "Tik  drukkertoestel URI in"

#: ../../printer/main.pm_.c:34
msgid "Pipe job into a command"
msgstr "Pyk drukstuk na program"

#: ../../printer/main.pm_.c:290 ../../printer/main.pm_.c:478
#: ../../printer/main.pm_.c:794 ../../printer/printerdrake.pm_.c:3228
msgid "Unknown model"
msgstr "Onbekende model"

#: ../../printer/main.pm_.c:317
#, fuzzy
msgid "Local Printers"
msgstr "Plaaslike drukker"

#
#: ../../printer/main.pm_.c:319 ../../printer/main.pm_.c:678
#, fuzzy
msgid "Remote Printers"
msgstr "Eksterne drukker"

#: ../../printer/main.pm_.c:326 ../../printer/printerdrake.pm_.c:381
#, c-format
msgid " on parallel port \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:329 ../../printer/printerdrake.pm_.c:383
#, c-format
msgid ", USB printer \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:334
#, c-format
msgid ", multi-function device on parallel port \\/*%s"
msgstr ""

#: ../../printer/main.pm_.c:337
msgid ", multi-function device on USB"
msgstr ""

#: ../../printer/main.pm_.c:339
msgid ", multi-function device on HP JetDirect"
msgstr ""

#: ../../printer/main.pm_.c:341
msgid ", multi-function device"
msgstr ""

#: ../../printer/main.pm_.c:344
#, fuzzy, c-format
msgid ", printing to %s"
msgstr "Fout in die skryf van %s"

#: ../../printer/main.pm_.c:346
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:348
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ""

#: ../../printer/main.pm_.c:352
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:356
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""

#: ../../printer/main.pm_.c:358
#, c-format
msgid ", using command %s"
msgstr ""

#: ../../printer/main.pm_.c:475 ../../printer/printerdrake.pm_.c:1603
msgid "Raw printer (No driver)"
msgstr ""

#: ../../printer/main.pm_.c:647
#, c-format
msgid "(on %s)"
msgstr "(op %s)"

#: ../../printer/main.pm_.c:649
msgid "(on this machine)"
msgstr "(op hierdie rekenaar)"

#: ../../printer/main.pm_.c:674
#, fuzzy, c-format
msgid "On CUPS server \"%s\""
msgstr "CUPS-bediener IP:"

#: ../../printer/main.pm_.c:680 ../../printer/printerdrake.pm_.c:2888
#: ../../printer/printerdrake.pm_.c:2899 ../../printer/printerdrake.pm_.c:3120
#: ../../printer/printerdrake.pm_.c:3171 ../../printer/printerdrake.pm_.c:3197
#: ../../printer/printerdrake.pm_.c:3352 ../../printer/printerdrake.pm_.c:3354
msgid " (Default)"
msgstr " (Verstek)"

#: ../../printer/printerdrake.pm_.c:27
msgid "Select Printer Connection"
msgstr "Kies drukkerkonneksie"

#: ../../printer/printerdrake.pm_.c:28
msgid "How is the printer connected?"
msgstr "Hoe is die drukker gekonekteer?"

#: ../../printer/printerdrake.pm_.c:30
#, fuzzy
msgid ""
"\n"
"Printers on remote CUPS servers you do not have to configure here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
"op te stel nie; drukkers wod outomaties bespeur.\n"
"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."

#: ../../printer/printerdrake.pm_.c:38
msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""

#: ../../printer/printerdrake.pm_.c:81 ../../printer/printerdrake.pm_.c:2950
#, fuzzy
msgid "CUPS configuration"
msgstr "Konfigurasie"

#
#: ../../printer/printerdrake.pm_.c:82 ../../printer/printerdrake.pm_.c:2951
#, fuzzy
msgid "Specify CUPS server"
msgstr "Verwyder CUPS-bediener"

#: ../../printer/printerdrake.pm_.c:83
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"do not have to configure anything; the CUPS servers inform your machine "
"automatically about their printers. All printers currently known to your "
"machine are listed in the \"Remote printers\" section in the main window of "
"Printerdrake. When your CUPS server is not in your local network, you have "
"to enter the CUPS server IP address and optionally the port number to get "
"the printer information from the server, otherwise leave these fields blank."
msgstr ""

#: ../../printer/printerdrake.pm_.c:84
msgid ""
"\n"
"Normally, CUPS is automatically configured according to your network "
"environment, so that you can access the printers on the CUPS servers in your "
"local network. If this does not work correctly, turn off \"Automatic CUPS "
"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
"forget to restart CUPS afterwards (command: \"service cups restart\")."
msgstr ""

#: ../../printer/printerdrake.pm_.c:88
msgid "The IP address should look like 192.168.1.20"
msgstr "IP-adres moet iets soos 192.168.1.20. lyk"

#: ../../printer/printerdrake.pm_.c:92 ../../printer/printerdrake.pm_.c:1041
msgid "The port number should be an integer!"
msgstr "Die poortnommer moet  heeltal wees."

#: ../../printer/printerdrake.pm_.c:99
msgid "CUPS server IP"
msgstr "CUPS-bediener IP:"

#: ../../printer/printerdrake.pm_.c:100 ../../printer/printerdrake.pm_.c:1061
#: ../../standalone/harddrake2_.c:63
msgid "Port"
msgstr "Poort"

#: ../../printer/printerdrake.pm_.c:102
msgid "Automatic CUPS configuration"
msgstr "Outomatiese CUPS konfigurasie"

#
#: ../../printer/printerdrake.pm_.c:159
#, fuzzy
msgid "Checking your system..."
msgstr "Watter drukkerstelsel verlang u?"

#: ../../printer/printerdrake.pm_.c:159 ../../printer/printerdrake.pm_.c:226
#: ../../printer/printerdrake.pm_.c:1477 ../../printer/printerdrake.pm_.c:1481
#: ../../printer/printerdrake.pm_.c:1598 ../../printer/printerdrake.pm_.c:2133
#: ../../printer/printerdrake.pm_.c:2284 ../../printer/printerdrake.pm_.c:2343
#: ../../printer/printerdrake.pm_.c:2415 ../../printer/printerdrake.pm_.c:2436
#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2630
#: ../../printer/printerdrake.pm_.c:2636 ../../printer/printerdrake.pm_.c:2701
#: ../../printer/printerdrake.pm_.c:2720 ../../printer/printerdrake.pm_.c:2731
#: ../../printer/printerdrake.pm_.c:2764 ../../printer/printerdrake.pm_.c:2809
#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:2911
#: ../../printer/printerdrake.pm_.c:2989 ../../printer/printerdrake.pm_.c:3281
#: ../../printer/printerdrake.pm_.c:3328 ../../printer/printerdrake.pm_.c:3369
#: ../../standalone/printerdrake_.c:47
#, fuzzy
msgid "Printerdrake"
msgstr "Drukker"

#: ../../printer/printerdrake.pm_.c:167
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr ""

#
#: ../../printer/printerdrake.pm_.c:179
#, fuzzy
msgid ""
"The following printers\n"
"\n"
msgstr "Dei volgende pakkette gaan verwyder word"

#
#: ../../printer/printerdrake.pm_.c:180
#, fuzzy
msgid ""
"The following printer\n"
"\n"
msgstr "Dei volgende pakkette gaan verwyder word"

#: ../../printer/printerdrake.pm_.c:182
msgid ""
"\n"
"and one unknown printer are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:184
#, c-format
msgid ""
"\n"
"and %d unknown printers are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:187
msgid ""
"\n"
"are "
msgstr ""

#: ../../printer/printerdrake.pm_.c:187
msgid ""
"\n"
"is "
msgstr ""

#: ../../printer/printerdrake.pm_.c:189
#, fuzzy
msgid "directly connected to your system"
msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"

#: ../../printer/printerdrake.pm_.c:192
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm_.c:194
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""

#: ../../printer/printerdrake.pm_.c:200
#, fuzzy
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr "Op watter seriaalpoort is u modem gekoppel?"

#: ../../printer/printerdrake.pm_.c:214
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:215
#, fuzzy
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr ""
"Wil u hierdie drukker (\"%s\")\n"
"die verstek drukker maak?"

#: ../../printer/printerdrake.pm_.c:217
#, fuzzy
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Wil u die konneksie met herlaaityd aanskakel?"

#: ../../printer/printerdrake.pm_.c:218
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:219
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""

#: ../../printer/printerdrake.pm_.c:258 ../../printer/printerdrake.pm_.c:270
#: ../../printer/printerdrake.pm_.c:328 ../../printer/printerdrake.pm_.c:2933
#: ../../printer/printerdrake.pm_.c:3060
#, fuzzy
msgid "Add a new printer"
msgstr "Voeg drukker by"

#: ../../printer/printerdrake.pm_.c:259
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""

#: ../../printer/printerdrake.pm_.c:272
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) and you Windows machines must be connected and "
"turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you don't need "
"it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:281 ../../printer/printerdrake.pm_.c:298
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#: ../../printer/printerdrake.pm_.c:289
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you don't need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not "
"want to set up your printer(s) now."
msgstr ""

#
#: ../../printer/printerdrake.pm_.c:307
#, fuzzy
msgid "Auto-detect printers connected to this machine"
msgstr "Eksterne drukker"

#: ../../printer/printerdrake.pm_.c:310
msgid "Auto-detect printers connected directly to the local network"
msgstr ""

#: ../../printer/printerdrake.pm_.c:313
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""

#: ../../printer/printerdrake.pm_.c:329
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
"Center."
msgstr ""

#: ../../printer/printerdrake.pm_.c:364 ../../printer/printerdrake.pm_.c:538
#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978
#, fuzzy
msgid "Printer auto-detection"
msgstr "Gebruik outobespeuring"

#: ../../printer/printerdrake.pm_.c:385
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:387
#, fuzzy, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Eksterne SMB/Windows 95/98/NT-drukker"

#: ../../printer/printerdrake.pm_.c:391
#, fuzzy, c-format
msgid "Detected %s"
msgstr "%s bespeur"

#: ../../printer/printerdrake.pm_.c:395 ../../printer/printerdrake.pm_.c:423
#: ../../printer/printerdrake.pm_.c:440
#, c-format
msgid "Printer on parallel port \\/*%s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:397 ../../printer/printerdrake.pm_.c:425
#: ../../printer/printerdrake.pm_.c:443
#, c-format
msgid "USB printer \\/*%s"
msgstr ""

#
#: ../../printer/printerdrake.pm_.c:399
#, fuzzy, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Netwerkdrukker (sok)"

#: ../../printer/printerdrake.pm_.c:401
#, fuzzy, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Eksterne SMB/Windows 95/98/NT-drukker"

#: ../../printer/printerdrake.pm_.c:525 ../../printer/printerdrake.pm_.c:547
#, fuzzy
msgid "Local Printer"
msgstr "Plaaslike drukker"

#: ../../printer/printerdrake.pm_.c:526
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm_.c:530
#, fuzzy
msgid "You must enter a device or file name!"
msgstr "Tik  drukkertoestel URI in"

#: ../../printer/printerdrake.pm_.c:539
#, fuzzy
msgid "No printer found!"
msgstr "Plaaslike drukker"

#: ../../printer/printerdrake.pm_.c:548
#, fuzzy
msgid "Available printers"
msgstr "Plaaslike drukker"

#: ../../printer/printerdrake.pm_.c:552
msgid ""
"The following printer was auto-detected, if it is not the one you want to "
"configure, enter a device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:553
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up or enter a device name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:555
msgid ""
"The following printer was auto-detected. The configuration of the printer "
"will work fully automatically. If your printer was not correctly detected or "
"if you prefer a customized printer configuration, turn on \"Manual "
"configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:556
msgid ""
"Here is a list of all auto-detected printers. Please choose the printer you "
"want to set up. The configuration of the printer will work fully "
"automatically. If your printer was not correctly detected or if you prefer a "
"customized printer configuration, turn on \"Manual configuration\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:558
msgid ""
"Please choose the port where your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""

#: ../../printer/printerdrake.pm_.c:559
#, fuzzy
msgid "Please choose the port where your printer is connected to."
msgstr "Op watter seriaalpoort is u modem gekoppel?"

#: ../../printer/printerdrake.pm_.c:561
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""

#: ../../printer/printerdrake.pm_.c:565
#, fuzzy
msgid "You must choose/enter a printer/device!"
msgstr "Tik  drukkertoestel URI in"

#: ../../printer/printerdrake.pm_.c:584
#, fuzzy
msgid "Manual configuration"
msgstr "Kleurkonfigurasie"

#: ../../printer/printerdrake.pm_.c:633
msgid "Remote lpd Printer Options"
msgstr "Eksterne lpd drukkeropsies"

#: ../../printer/printerdrake.pm_.c:634
#, fuzzy
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
"van die drukkkerbediener en die naam van die drukkertou\n"
"voorsien word."

#: ../../printer/printerdrake.pm_.c:635
msgid "Remote host name"
msgstr "Eksterne bedienernaam"

#
#: ../../printer/printerdrake.pm_.c:636
msgid "Remote printer name"
msgstr "Eksterne drukkernaam"

#: ../../printer/printerdrake.pm_.c:639
msgid "Remote host name missing!"
msgstr "Eksterne bedienernaam ontbreek!"

#: ../../printer/printerdrake.pm_.c:643
msgid "Remote printer name missing!"
msgstr "Eksterne drukkernam ontbreek!"

#: ../../printer/printerdrake.pm_.c:665 ../../printer/printerdrake.pm_.c:1170
#, fuzzy, c-format
msgid "Detected model: %s %s"
msgstr "%s bespeur"

#: ../../printer/printerdrake.pm_.c:742 ../../printer/printerdrake.pm_.c:978
#, fuzzy
msgid "Scanning network..."
msgstr "Konneksie word begin..."

#: ../../printer/printerdrake.pm_.c:751 ../../printer/printerdrake.pm_.c:772
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ""

#: ../../printer/printerdrake.pm_.c:754 ../../printer/printerdrake.pm_.c:775
#, fuzzy, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Netwerk op pad af"

#: ../../printer/printerdrake.pm_.c:795
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "SMB (Windows 9x/NT) drukkeropsies"

#: ../../printer/printerdrake.pm_.c:796
#, fuzzy
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
"toepaslike gebruikerskode en wagwoord; werkgroepnaam."

#: ../../printer/printerdrake.pm_.c:797
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""

#: ../../printer/printerdrake.pm_.c:799
msgid "SMB server host"
msgstr "SMB-bedienernaam"

#: ../../printer/printerdrake.pm_.c:800
msgid "SMB server IP"
msgstr "SMB-bediener IP:"

#: ../../printer/printerdrake.pm_.c:801
msgid "Share name"
msgstr "Drukkernaam:"

#: ../../printer/printerdrake.pm_.c:804
msgid "Workgroup"
msgstr "Werkgroep:"

#: ../../printer/printerdrake.pm_.c:806
#, fuzzy
msgid "Auto-detected"
msgstr "Gebruik outobespeuring"

#: ../../printer/printerdrake.pm_.c:816
msgid "Either the server name or the server's IP must be given!"
msgstr "�f die bedienernaam �f die bediener-IP moet verskaf word!"

#: ../../printer/printerdrake.pm_.c:820
msgid "Samba share name missing!"
msgstr "SAMBA-deelnaam ontbreek!"

#: ../../printer/printerdrake.pm_.c:826
msgid "SECURITY WARNING!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:827
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:837
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:840
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:911
msgid "NetWare Printer Options"
msgstr "NetWare drukkeropsies"

#: ../../printer/printerdrake.pm_.c:912
#, fuzzy
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
"die drukkernaam; toepaslike gebruikerskode en wagwoord."

#: ../../printer/printerdrake.pm_.c:913
msgid "Printer Server"
msgstr "Drukkerbediener"

#: ../../printer/printerdrake.pm_.c:914
msgid "Print Queue Name"
msgstr "Drukkertounaam"

#: ../../printer/printerdrake.pm_.c:919
msgid "NCP server name missing!"
msgstr "NCP-bedienernaam ontbreek!"

#: ../../printer/printerdrake.pm_.c:923
msgid "NCP queue name missing!"
msgstr "NCP-tounaam ontbreek!"

#: ../../printer/printerdrake.pm_.c:987 ../../printer/printerdrake.pm_.c:1007
#, c-format
msgid ", host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:990 ../../printer/printerdrake.pm_.c:1010
#, c-format
msgid "Host \"%s\", port %s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1030
#, fuzzy
msgid "TCP/Socket Printer Options"
msgstr "Sokdrukkeropsies"

#: ../../printer/printerdrake.pm_.c:1032
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) into the input fields."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1033
#, fuzzy
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
"wat saam met die hardeware gekom het."

#: ../../printer/printerdrake.pm_.c:1037
#, fuzzy
msgid "Printer host name or IP missing!"
msgstr "Drukkerbedienernaam ontbreek!"

#: ../../printer/printerdrake.pm_.c:1059
#, fuzzy
msgid "Printer host name or IP"
msgstr "Drukkerbedienernaam"

#: ../../printer/printerdrake.pm_.c:1107 ../../printer/printerdrake.pm_.c:1109
msgid "Printer Device URI"
msgstr "Drukkertoestel URI"

#: ../../printer/printerdrake.pm_.c:1108
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
"spoelprogramme ondersteun nie."

#: ../../printer/printerdrake.pm_.c:1123
msgid "A valid URI must be entered!"
msgstr "'n Geldige URI moet verskaf word!"

#: ../../printer/printerdrake.pm_.c:1463
#, fuzzy
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Elke drukker benodig  naam (bv. lp).\n"
"Die Beskrywing- en Liggingvelde is opsioneel.\n"
"Hulle dien as inligting vir gebruikers."

#: ../../printer/printerdrake.pm_.c:1464
msgid "Name of printer"
msgstr "Drukkernaam"

#: ../../printer/printerdrake.pm_.c:1465 ../../standalone/harddrake2_.c:38
msgid "Description"
msgstr "Beskrywing"

#: ../../printer/printerdrake.pm_.c:1466
msgid "Location"
msgstr "Ligging"

#: ../../printer/printerdrake.pm_.c:1478 ../../printer/printerdrake.pm_.c:1599
#, fuzzy
msgid "Reading printer database..."
msgstr "Drukkerdata word gelees..."

#: ../../printer/printerdrake.pm_.c:1482
#, fuzzy
msgid "Preparing printer database..."
msgstr "Drukkerdata word gelees..."

#
#: ../../printer/printerdrake.pm_.c:1578
#, fuzzy
msgid "Your printer model"
msgstr "Eksterne drukkernaam"

#: ../../printer/printerdrake.pm_.c:1579
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1584 ../../printer/printerdrake.pm_.c:1587
#, fuzzy
msgid "The model is correct"
msgstr "Is dit korrek?"

#
#: ../../printer/printerdrake.pm_.c:1585 ../../printer/printerdrake.pm_.c:1586
#: ../../printer/printerdrake.pm_.c:1589
#, fuzzy
msgid "Select model manually"
msgstr "Eksterne drukkernaam"

#: ../../printer/printerdrake.pm_.c:1606
msgid "Printer model selection"
msgstr "Drukkermodelkeuse"

#: ../../printer/printerdrake.pm_.c:1607
msgid "Which printer model do you have?"
msgstr "Oor watter tipe drukker beskik u?"

#: ../../printer/printerdrake.pm_.c:1608
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Search the correct model in the list when the cursor is "
"standing on a wrong model or on \"Raw printer\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1611
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1697
#, fuzzy
msgid "OKI winprinter configuration"
msgstr "Verander drukkerkonfigurasie"

#: ../../printer/printerdrake.pm_.c:1698
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1718 ../../printer/printerdrake.pm_.c:1745
#, fuzzy
msgid "Lexmark inkjet configuration"
msgstr "Internetkonfigurasie"

#: ../../printer/printerdrake.pm_.c:1719
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1746
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1749
msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1750
msgid ""
"Your printer belongs to the group of GDI laser printers (winprinters) sold "
"by different manufacturers which uses the Zenographics ZJ-stream raster "
"format for the data sent to the printer. The driver for these printers is "
"still in a very early development stage and so it will perhaps not always "
"work properly. Especially it is possible that the printer only works when "
"you choose the A4 paper size.\n"
"\n"
"Some of these printers, as the HP LaserJet 1000, for which this driver was "
"originally created, need their firmware to be uploaded to them after they "
"are turned on. In the case of the HP LaserJet 1000 you have to search the "
"printer's Windows driver CD or your Windows partition for the file "
"\"sihp1000.img\" and upload the file to the printer with one of the "
"following commands:\n"
"\n"
"     lpr -o raw sihp1000.img\n"
"     cat sihp1000.img > /dev/usb/lp0\n"
"\n"
"The first command can be given by any normal user, the second must be given "
"as root. After having done so you can print normally.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:1972
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""

#: ../../printer/printerdrake.pm_.c:1981
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Opsie %s moet 'n heeltal wees!"

#: ../../printer/printerdrake.pm_.c:1985
#, c-format
msgid "Option %s must be a number!"
msgstr "Opsie %s moet 'n nommer wees"

#: ../../printer/printerdrake.pm_.c:1989
#, c-format
msgid "Option %s out of range!"
msgstr "Opsie %s is buite bereik!"

#: ../../printer/printerdrake.pm_.c:2028
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Wil u hierdie drukker (\"%s\")\n"
"die verstek drukker maak?"

#: ../../printer/printerdrake.pm_.c:2051
msgid "Test pages"
msgstr "Toetsbladsye"

#: ../../printer/printerdrake.pm_.c:2052
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2056
msgid "No test pages"
msgstr "Geen toetsbladsye"

#: ../../printer/printerdrake.pm_.c:2057
msgid "Print"
msgstr "Druk"

#: ../../printer/printerdrake.pm_.c:2114
msgid "Standard test page"
msgstr "Standaard toetsbladsy"

#: ../../printer/printerdrake.pm_.c:2117
msgid "Alternative test page (Letter)"
msgstr "Alternatiewe toetsbladsy (Lettergrootte)"

#: ../../printer/printerdrake.pm_.c:2120
msgid "Alternative test page (A4)"
msgstr "Alternatiewe toetsbladsy (A4)"

#: ../../printer/printerdrake.pm_.c:2122
msgid "Photo test page"
msgstr "Fototoetsbladsy"

#: ../../printer/printerdrake.pm_.c:2126
#, fuzzy
msgid "Do not print any test page"
msgstr "Druk toetsbladsy(e)"

#: ../../printer/printerdrake.pm_.c:2134 ../../printer/printerdrake.pm_.c:2285
msgid "Printing test page(s)..."
msgstr "Toetsbladsy(e) word gedruk..."

#: ../../printer/printerdrake.pm_.c:2159
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
"Drukstatus:\n"
"%s\n"
"\n"

#: ../../printer/printerdrake.pm_.c:2163
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Toetsbladsy(e) is na die drukker gestuur.\n"
"Dit mag 'n tydjie neem voordat drukwerk begin.\n"

#: ../../printer/printerdrake.pm_.c:2170
msgid "Did it work properly?"
msgstr "Het dit reg gewerk?"

#: ../../printer/printerdrake.pm_.c:2190 ../../printer/printerdrake.pm_.c:3229
#, fuzzy
msgid "Raw printer"
msgstr "Geen drukker"

#: ../../printer/printerdrake.pm_.c:2216
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2218
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2221 ../../printer/printerdrake.pm_.c:2238
#: ../../printer/printerdrake.pm_.c:2248
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""

#: ../../printer/printerdrake.pm_.c:2224 ../../printer/printerdrake.pm_.c:2264
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2228
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2233 ../../printer/printerdrake.pm_.c:2243
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2235 ../../printer/printerdrake.pm_.c:2245
#: ../../printer/printerdrake.pm_.c:2255
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2240 ../../printer/printerdrake.pm_.c:2250
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2253
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2257
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2261
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2271
#, fuzzy, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr "Netwerk op pad af"

#: ../../printer/printerdrake.pm_.c:2272
#, fuzzy, c-format
msgid "Printing/Scanning on \"%s\""
msgstr "Netwerk op pad af"

#: ../../printer/printerdrake.pm_.c:2274
#, fuzzy, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr "Netwerk op pad af"

#: ../../printer/printerdrake.pm_.c:2275
#, fuzzy, c-format
msgid "Printing on the printer \"%s\""
msgstr "Netwerk op pad af"

#: ../../printer/printerdrake.pm_.c:2278 ../../printer/printerdrake.pm_.c:2281
#: ../../printer/printerdrake.pm_.c:2282 ../../printer/printerdrake.pm_.c:2283
#: ../../printer/printerdrake.pm_.c:3216 ../../standalone/drakTermServ_.c:307
#: ../../standalone/drakbackup_.c:1533 ../../standalone/drakbackup_.c:4156
#: ../../standalone/drakbug_.c:108 ../../standalone/drakfont_.c:695
#: ../../standalone/drakfont_.c:956 ../../standalone/net_monitor_.c:118
msgid "Close"
msgstr "Sluit af"

#: ../../printer/printerdrake.pm_.c:2281
#, fuzzy
msgid "Print option list"
msgstr "Drukkeropsies"

#: ../../printer/printerdrake.pm_.c:2301
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. "
"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
"scanner when you have more than one) from the command line or with the "
"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
"\" menu. Call also \"man scanimage\" on the command line to get more "
"information.\n"
"\n"
"Do not use \"scannerdrake\" for this device!"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2322
msgid ""
"Your printer was configured automatically to give you access to the photo "
"card drives from your PC. Now you can access your photo cards using the "
"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
"\"man mtools\" on the command line for more info). You find the card's file "
"system under the drive letter \"p:\", or subsequent drive letters when you "
"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
"can switch between drive letters with the field at the upper-right corners "
"of the file lists."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2344 ../../printer/printerdrake.pm_.c:2702
#: ../../printer/printerdrake.pm_.c:2990
msgid "Reading printer data..."
msgstr "Drukkerdata word gelees..."

#: ../../printer/printerdrake.pm_.c:2364 ../../printer/printerdrake.pm_.c:2391
#: ../../printer/printerdrake.pm_.c:2426
msgid "Transfer printer configuration"
msgstr "Dra drukkerkonfigurasie oor"

#: ../../printer/printerdrake.pm_.c:2365
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2368
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2370
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2372
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"

#: ../../printer/printerdrake.pm_.c:2374
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2375
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2376
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2379
msgid "Do not transfer printers"
msgstr "Moet nie drukkers oordra nie"

#: ../../printer/printerdrake.pm_.c:2380 ../../printer/printerdrake.pm_.c:2396
msgid "Transfer"
msgstr "Oordrag"

#: ../../printer/printerdrake.pm_.c:2392
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""

#: ../../printer/printerdrake.pm_.c:2400
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2405
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2413
msgid "New printer name"
msgstr "Nuwe drukkernaam"

#: ../../printer/printerdrake.pm_.c:2416
#, c-format
msgid "Transferring %s..."
msgstr "%s word oorgedra..."

#: ../../printer/printerdrake.pm_.c:2427
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2437
#, fuzzy
msgid "Refreshing printer data..."
msgstr "Drukkerdata word gelees..."

#: ../../printer/printerdrake.pm_.c:2445 ../../printer/printerdrake.pm_.c:2516
#: ../../printer/printerdrake.pm_.c:2528
#, fuzzy
msgid "Configuration of a remote printer"
msgstr "Konfigureer drukker"

#: ../../printer/printerdrake.pm_.c:2446
#, fuzzy
msgid "Starting network..."
msgstr "Konneksie word begin..."

#: ../../printer/printerdrake.pm_.c:2479 ../../printer/printerdrake.pm_.c:2483
#: ../../printer/printerdrake.pm_.c:2485
#, fuzzy
msgid "Configure the network now"
msgstr "Stel netwerk op"

#: ../../printer/printerdrake.pm_.c:2480
#, fuzzy
msgid "Network functionality not configured"
msgstr "Monitor is nie opgestel nie"

#: ../../printer/printerdrake.pm_.c:2481
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2484
#, fuzzy
msgid "Go on without configuring the network"
msgstr "Stel netwerk op"

#: ../../printer/printerdrake.pm_.c:2518
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network gets accessable after booting your "
"system and correct the configuration using the Mandrake Control Center, "
"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
"printer, also using the Mandrake Control Center, section \"Hardware\"/"
"\"Printer\""
msgstr ""

#: ../../printer/printerdrake.pm_.c:2519
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""

#
#: ../../printer/printerdrake.pm_.c:2529
#, fuzzy
msgid "Restarting printing system..."
msgstr "Watter drukkerstelsel verlang u?"

#: ../../printer/printerdrake.pm_.c:2568
#, fuzzy
msgid "high"
msgstr "Hoog"

#: ../../printer/printerdrake.pm_.c:2568
#, fuzzy
msgid "paranoid"
msgstr "Parano�es"

#: ../../printer/printerdrake.pm_.c:2569
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2570
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessable by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""

#
#: ../../printer/printerdrake.pm_.c:2604
#, fuzzy
msgid "Starting the printing system at boot time"
msgstr "Watter drukkerstelsel verlang u?"

#: ../../printer/printerdrake.pm_.c:2605
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2625 ../../printer/printerdrake.pm_.c:2765
msgid "Checking installed software..."
msgstr "Installeerde sagteware word deursoek..."

#: ../../printer/printerdrake.pm_.c:2630
#, fuzzy, c-format
msgid "Removing %s ..."
msgstr "LPD word verwyder..."

#: ../../printer/printerdrake.pm_.c:2636
#, fuzzy, c-format
msgid "Installing %s ..."
msgstr "Installeer pakket %s"

#: ../../printer/printerdrake.pm_.c:2685
msgid "Select Printer Spooler"
msgstr "Kies drukkerspoelprogram"

#
#: ../../printer/printerdrake.pm_.c:2686
msgid "Which printing system (spooler) do you want to use?"
msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"

#: ../../printer/printerdrake.pm_.c:2720
#, fuzzy, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Konfigureer drukker"

#: ../../printer/printerdrake.pm_.c:2731
#, fuzzy
msgid "Installing Foomatic..."
msgstr "Installeer pakket %s"

#: ../../printer/printerdrake.pm_.c:2800 ../../printer/printerdrake.pm_.c:2838
#: ../../printer/printerdrake.pm_.c:3230 ../../printer/printerdrake.pm_.c:3300
msgid "Printer options"
msgstr "Drukkeropsies"

#: ../../printer/printerdrake.pm_.c:2810
#, fuzzy
msgid "Preparing Printerdrake..."
msgstr "Drukkerdata word gelees..."

#: ../../printer/printerdrake.pm_.c:2825 ../../printer/printerdrake.pm_.c:3369
#, fuzzy
msgid "Configuring applications..."
msgstr "Konfigureer drukker"

#: ../../printer/printerdrake.pm_.c:2845
msgid "Would you like to configure printing?"
msgstr "Wil u 'n drukwerk nou konfigureer?"

#: ../../printer/printerdrake.pm_.c:2857
msgid "Printing system: "
msgstr "Drukkerstelsel:"

#: ../../printer/printerdrake.pm_.c:2915
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; to view information about it; "
"or to make a printer on a remote CUPS server available for Star Office/"
"OpenOffice.org/GIMP."
msgstr ""
"Hier is die bestaande drukkertoue.\n"
"U kan byvoeg or verwyder soos nodig."

#: ../../printer/printerdrake.pm_.c:2916
#, fuzzy
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it."
msgstr ""
"Hier is die bestaande drukkertoue.\n"
"U kan byvoeg or verwyder soos nodig."

#: ../../printer/printerdrake.pm_.c:2942
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""

#: ../../printer/printerdrake.pm_.c:2960
#, fuzzy
msgid "Change the printing system"
msgstr "Stel netwerk op"

#: ../../printer/printerdrake.pm_.c:2965 ../../standalone/drakconnect_.c:274
msgid "Normal Mode"
msgstr "Normale modus"

#: ../../printer/printerdrake.pm_.c:3127 ../../printer/printerdrake.pm_.c:3176
#: ../../printer/printerdrake.pm_.c:3363
#, fuzzy
msgid "Do you want to configure another printer?"
msgstr "Wil u die konfigurasie toets?"

#: ../../printer/printerdrake.pm_.c:3211
msgid "Modify printer configuration"
msgstr "Verander drukkerkonfigurasie"

#: ../../printer/printerdrake.pm_.c:3213
#, fuzzy, c-format
msgid ""
"Printer %s\n"
"What do you want to modify on this printer?"
msgstr ""
"Drukker %s: %s %s\n"
"Wil u hierdie drukker verander?"

#: ../../printer/printerdrake.pm_.c:3217
msgid "Do it!"
msgstr "Gaan voort!"

#: ../../printer/printerdrake.pm_.c:3222 ../../printer/printerdrake.pm_.c:3271
msgid "Printer connection type"
msgstr "Drukkerkonneksietipe"

#: ../../printer/printerdrake.pm_.c:3223 ../../printer/printerdrake.pm_.c:3275
msgid "Printer name, description, location"
msgstr "Drukkernaam,. beskrywing, ligging"

#: ../../printer/printerdrake.pm_.c:3225 ../../printer/printerdrake.pm_.c:3293
msgid "Printer manufacturer, model, driver"
msgstr "Drukkervervaardiger, model, drywer"

#: ../../printer/printerdrake.pm_.c:3226 ../../printer/printerdrake.pm_.c:3294
msgid "Printer manufacturer, model"
msgstr "Drukkervervaardiger, model"

#: ../../printer/printerdrake.pm_.c:3232 ../../printer/printerdrake.pm_.c:3304
msgid "Set this printer as the default"
msgstr "Maak hierdie die verstekdrukker"

#: ../../printer/printerdrake.pm_.c:3234 ../../printer/printerdrake.pm_.c:3309
msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3235 ../../printer/printerdrake.pm_.c:3314
msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3236 ../../printer/printerdrake.pm_.c:3319
msgid "Print test pages"
msgstr "Druk toetsbladsy(e)"

#: ../../printer/printerdrake.pm_.c:3237 ../../printer/printerdrake.pm_.c:3321
#, fuzzy
msgid "Know how to use this printer"
msgstr "Wil u die konfigurasie toets?"

#
#: ../../printer/printerdrake.pm_.c:3238 ../../printer/printerdrake.pm_.c:3323
msgid "Remove printer"
msgstr "Verwyder drukker"

#: ../../printer/printerdrake.pm_.c:3282
#, fuzzy, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Drukkerdata word gelees..."

#: ../../printer/printerdrake.pm_.c:3307
msgid "Default printer"
msgstr "Verstek drukker"

#: ../../printer/printerdrake.pm_.c:3308
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Drukker \"%s\" is nou die verstekdrukker"

#: ../../printer/printerdrake.pm_.c:3310
msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3312
#, c-format
msgid ""
"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3313
#, c-format
msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3315
msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
msgstr ""

#: ../../printer/printerdrake.pm_.c:3317
#, c-format
msgid ""
"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
"GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3318
#, c-format
msgid ""
"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""

#: ../../printer/printerdrake.pm_.c:3325
#, fuzzy, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Wil u die werklik die drukker verwyder?"

#: ../../printer/printerdrake.pm_.c:3329
#, fuzzy, c-format
msgid "Removing printer \"%s\"..."
msgstr "Drukkerdata word gelees..."

#: ../../raid.pm_.c:35
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"

#: ../../raid.pm_.c:137
msgid "mkraid failed"
msgstr "mkraid het gefaal"

#: ../../raid.pm_.c:137
msgid "mkraid failed (maybe raidtools are missing?)"
msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."

#: ../../raid.pm_.c:153
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"

#: ../../security/main.pm_.c:36
msgid ""
"Standard: This is the standard security recommended for a computer that will "
"be used to connect\n"
"               to the Internet as a client.\n"
"\n"
"High:       There are already some restrictions, and more automatic checks "
"are run every night.\n"
"\n"
"Higher:    The security is now high enough to use the system as a server "
"which can accept\n"
"              connections from many clients. If your machine is only a "
"client on the Internet, you\n"
"\t      should choose a lower level.\n"
"\n"
"Paranoid:  This is similar to the previous level, but the system is entirely "
"closed and security\n"
"                features are at their maximum\n"
"\n"
"Security Administrator:\n"
"               If the 'Security Alerts' option is set, security alerts will "
"be sent to this user (username or\n"
"\t       email)"
msgstr ""

#: ../../security/main.pm_.c:66
#, fuzzy
msgid "Security Level:"
msgstr "Sekuriteitsvlak word gestel."

#: ../../security/main.pm_.c:77
#, fuzzy, c-format
msgid " (default value: %s)"
msgstr " (Verstek)"

#: ../../security/main.pm_.c:113
#, fuzzy
msgid "Security Alerts:"
msgstr "Sekuriteitsvlak word gestel."

#: ../../security/main.pm_.c:115
#, fuzzy
msgid "Security Administrator:"
msgstr "Eksterne lpd drukkeropsies"

#: ../../security/main.pm_.c:128
#, fuzzy
msgid "Network Options"
msgstr "Module opsies:"

#: ../../security/main.pm_.c:128
#, fuzzy
msgid "System Options"
msgstr "Module opsies:"

#: ../../security/main.pm_.c:133 ../../security/main.pm_.c:164
msgid ""
"The following options can be set to customize your\n"
"system security. If you need explanations, click on Help.\n"
msgstr ""

#: ../../security/main.pm_.c:177
msgid "Periodic Checks"
msgstr ""

#: ../../security/main.pm_.c:191
#, fuzzy
msgid "Please wait, setting security level..."
msgstr "Sekuriteitsvlak word gestel."

#: ../../security/main.pm_.c:197
#, fuzzy
msgid "Please wait, setting security options..."
msgstr "Wag asb. installasie word voorberei"

#: ../../services.pm_.c:19
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"

#: ../../services.pm_.c:20
msgid "Anacron a periodic command scheduler."
msgstr "Anacron is skeduleerder vir periodiese instruksies."

#: ../../services.pm_.c:21
msgid ""
"apmd is used for monitoring batery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd word gebruik om battery status te monitor en dit dan te log via "
"syslog.\n"
"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
"swak is."

#: ../../services.pm_.c:23
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."

#: ../../services.pm_.c:25
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
"funksionaliteit\n"
"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
"konfigurasie."

#: ../../services.pm_.c:28
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM verleen muisvermo�ns aan teksgebaseerde Linuxapplikasies soos\n"
"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
"konsole toe asook opspringkieskaarte."

#: ../../services.pm_.c:31
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""

#: ../../services.pm_.c:33
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache is 'n WWW-bediener.\n"
"Dit kan HTML-l�ers uitstuur en CGI's hanteer"

#: ../../services.pm_.c:34
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
"vir\n"
"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
"waarvoor\n"
"inetd verantwoordelik is."

#: ../../services.pm_.c:38
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""

#: ../../services.pm_.c:40
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
"keyboard\n"
"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
"dit\n"
"op meeste rekenaars ongesper laat."

#: ../../services.pm_.c:43
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""

#: ../../services.pm_.c:45
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."

#: ../../services.pm_.c:46
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""

#: ../../services.pm_.c:48
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
"Dit is 'n diens wat drukstukke na drukkers toe reguleer."

#: ../../services.pm_.c:50
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""

#: ../../services.pm_.c:52
#, fuzzy
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
"rekenaarname na IP-adresse toe om te skakel."

#: ../../services.pm_.c:53
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Heg en ontheg all netwerkl�erstels (NFS), SMB (Lan Manger/Windows)\n"
"en NCP (Netware) hegpunte."

#: ../../services.pm_.c:55
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
"herlaaityf te begin."

#: ../../services.pm_.c:57
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS is 'n popul�re protokol vir l�erdeling oor TCP/IP netwerke.\n"
"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
"die /etc/exports l�er opgestel."

#: ../../services.pm_.c:60
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS is 'n popul�re protokol vir l�erdeling oor TCP/IP netwerke.\n"
"Hierdie diens vorosien die NFS-l�ersluitfunksionaliteit."

#: ../../services.pm_.c:62
msgid ""
"Automatically switch on numlock key locker under console\n"
"and XFree at boot."
msgstr ""

#: ../../services.pm_.c:64
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"

#: ../../services.pm_.c:65
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It won't get started unless configured so it is safe to "
"have\n"
"it installed on machines that don't need it."
msgstr ""
"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
"veilig om op rekenaars te h� wat dit nie nodig het nie."

#: ../../services.pm_.c:68
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."

#: ../../services.pm_.c:71
#, fuzzy
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
"van een bediener na 'n ander oordra."

#: ../../services.pm_.c:72
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Stoor en herstel die stelselentropiepoel vir ho� kwaliteit,\n"
"lukraaknommergenerasie."

#: ../../services.pm_.c:74
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle"
msgstr ""

#: ../../services.pm_.c:76
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
"meer komplekse protokolle nodig vir komplekse netwerke."

#: ../../services.pm_.c:79
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."

#: ../../services.pm_.c:81
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
"aangeteken is op ander samewerkende rekenaars."

#: ../../services.pm_.c:83
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similiar to finger)."
msgstr ""
"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
"'finger')."

#: ../../services.pm_.c:85
msgid "Launch the sound system on your machine"
msgstr "Laai die klankstelsel op u rekenaar"

#: ../../services.pm_.c:86
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
"te log na 'n verskeidenheid logl�ers. Dit is altyd goed om syslog te loop."

#: ../../services.pm_.c:88
msgid "Load the drivers for your usb devices."
msgstr "Laai die drywers vir u USB-toestelle"

#: ../../services.pm_.c:89
msgid "Starts the X Font Server (this is mandatory for XFree to run)."
msgstr "Laai die X-fontbediener (dis nodig vir XFree)."

#: ../../services.pm_.c:115 ../../services.pm_.c:157
msgid "Choose which services should be automatically started at boot time"
msgstr "Kies watter dienste moet outomaties begin met herlaaityd."

#: ../../services.pm_.c:127
#, fuzzy
msgid "Printing"
msgstr "Druk"

#: ../../services.pm_.c:128
msgid "Internet"
msgstr "Internet"

#: ../../services.pm_.c:131
msgid "File sharing"
msgstr ""

#: ../../services.pm_.c:133 ../../standalone/drakbackup_.c:1709
#, fuzzy
msgid "System"
msgstr "Stelselmode"

#: ../../services.pm_.c:138
#, fuzzy
msgid "Remote Administration"
msgstr "Eksterne lpd drukkeropsies"

#: ../../services.pm_.c:146
#, fuzzy
msgid "Database Server"
msgstr "Datbasis"

#: ../../services.pm_.c:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""

#: ../../services.pm_.c:191
msgid "Services"
msgstr "Dienste"

#: ../../services.pm_.c:203
msgid "running"
msgstr "aktief"

#: ../../services.pm_.c:203
msgid "stopped"
msgstr "onaktief"

#: ../../services.pm_.c:217
msgid "Services and deamons"
msgstr ""

#: ../../services.pm_.c:222
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""

#: ../../services.pm_.c:229
msgid "On boot"
msgstr "met herlaai"

#: ../../services.pm_.c:241
#, fuzzy
msgid "Start"
msgstr "Toestand"

#: ../../services.pm_.c:241
#, fuzzy
msgid "Stop"
msgstr "Sektor"

#: ../../share/advertising/01-thanks.pl_.c:9
msgid "Thank you for choosing Mandrake Linux 9.0"
msgstr ""

#: ../../share/advertising/01-thanks.pl_.c:10
msgid "Welcome to the Open Source world"
msgstr ""

#: ../../share/advertising/01-thanks.pl_.c:11
msgid ""
"The success of MandrakeSoft is based upon the principle of Free Software. "
"Your new operating system is the result of collaborative work on the part of "
"the worldwide Linux Community"
msgstr ""

#
#: ../../share/advertising/02-community.pl_.c:9
#, fuzzy
msgid "Get involved in the Free Software world"
msgstr "Protokol vir die res van die w�reld"

#: ../../share/advertising/02-community.pl_.c:10
msgid "Want to know more about the Open Source community?"
msgstr ""

#: ../../share/advertising/02-community.pl_.c:11
msgid ""
"To share your own knowledge and help build Linux tools, join the discussion "
"forums you'll find on our \"Community\" webpages"
msgstr ""

#: ../../share/advertising/03-internet.pl_.c:9
#, fuzzy
msgid "Get the most from the Internet"
msgstr "Konnekteer aan die internet"

#: ../../share/advertising/03-internet.pl_.c:10
msgid ""
"Mandrake Linux 9.0 has selected the best software for you. Surf the Web and "
"view animations with Mozilla and Konqueror, or read your mail and handle "
"your personal information with Evolution and Kmail"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:9
msgid "Discover the most up-to-date graphical and multimedia tools!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:10
msgid "Push multimedia to its limits!"
msgstr ""

#: ../../share/advertising/04-multimedia.pl_.c:11
msgid ""
"Mandrake Linux 9.0 enables you to use the very latest software to play audio "
"files, edit and handle your images or photos, and play videos"
msgstr ""

#: ../../share/advertising/05-games.pl_.c:9
msgid "Games"
msgstr "Speletjies"

#: ../../share/advertising/05-games.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides the best Open Source games - arcade, action, "
"strategy, ..."
msgstr ""

#: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:49
#, fuzzy
msgid "Mandrake Control Center"
msgstr "Beheersentrum"

#: ../../share/advertising/06-mcc.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides a powerful tool to fully customize and configure "
"your machine"
msgstr ""

#: ../../share/advertising/07-desktop.pl_.c:9
#, fuzzy
msgid "User interfaces"
msgstr "Netwerkkoppelvlak"

#: ../../share/advertising/07-desktop.pl_.c:10
msgid ""
"Mandrake Linux 9.0 provides you with 11 user interfaces that can be fully "
"modified: KDE 3, Gnome 2, WindowMaker, ..."
msgstr ""

#: ../../share/advertising/08-development.pl_.c:9
#, fuzzy
msgid "Development simplified"
msgstr "Ontwikkeling"

#: ../../share/advertising/08-development.pl_.c:10
msgid "Mandrake Linux 9.0 is the ultimate development platform"
msgstr ""

#: ../../share/advertising/08-development.pl_.c:11
msgid ""
"Use the full power of the GNU gcc 3 compiler as well as the best Open Source "
"development environments"
msgstr ""

#: ../../share/advertising/09-server.pl_.c:9
msgid "Turn your machine into a reliable server"
msgstr ""

#: ../../share/advertising/09-server.pl_.c:10
msgid ""
"Transform your machine into a powerful Linux server with a few clicks of "
"your mouse: Web server, mail, firewall, router, file and print server, ..."
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:9
msgid "Optimize your security"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:10
msgid ""
"The MandrakeSecurity range includes the Multi Network Firewall product (M.N."
"F.)"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:11
msgid ""
"This firewall product includes network features that allow you to fulfill "
"all your security needs"
msgstr ""

#: ../../share/advertising/10-mnf.pl_.c:12
msgid "This product is available on MandrakeStore website"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:9
msgid "The official MandrakeSoft store"
msgstr ""

#: ../../share/advertising/11-mdkstore.pl_.c:10
msgid ""
"Our full range of Linux solutions, as well as special offers on products and "
"other \"goodies,\" are available online on our e-store:"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl_.c:9
msgid "Strategic partners"
msgstr ""

#: ../../share/advertising/12-mdkstore.pl_.c:10
msgid ""
"MandrakeSoft works alongside a selection of companies offering professional "
"solutions compatible with Mandrake Linux. A list of these partners is "
"available on the MandrakeStore"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:9
msgid "Discover MandrakeSoft's training catalogue Linux-Campus"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:10
msgid ""
"The training program has been created to respond to the needs of both end "
"users and experts (Network and System administrators)"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:11
msgid "Certify yourself on Linux"
msgstr ""

#: ../../share/advertising/13-mdkcampus.pl_.c:12
msgid ""
"Whether you choose to teach yourself online or via our network of training "
"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI "
"certification program (worldwide professional technical certification)"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:9
#, fuzzy
msgid "Become a MandrakeExpert"
msgstr "Kundige"

#: ../../share/advertising/14-mdkexpert.pl_.c:10
msgid ""
"Find the solutions of your problems via MandrakeSoft's online support "
"platform"
msgstr ""

#: ../../share/advertising/14-mdkexpert.pl_.c:11
msgid ""
"Join the MandrakeSoft support teams and the Linux Community online to share "
"your knowledge and help others by becoming a recognized Expert on the online "
"technical support website:"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9
#, fuzzy
msgid "MandrakeExpert Corporate"
msgstr "Kundige"

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10
msgid "An online platform to respond to company's specific support needs"
msgstr ""

#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11
msgid ""
"All incidents will be followed up by a single qualified MandrakeSoft "
"technical expert."
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:9
msgid "Discover MandrakeClub and Mandrake Corporate Club"
msgstr ""

#: ../../share/advertising/17-mdkclub.pl_.c:10
msgid ""
"MandrakeClub and Mandrake Corporate Club were created for business and "
"private users of Mandrake Linux who would like to directly support their "
"favorite Linux distribution while also receiving special privileges. If you "
"enjoy our products, if your company benefits from our products to gain a "
"competititve edge, if you want to support Mandrake Linux development, join "
"MandrakeClub!"
msgstr ""

#: ../../standalone.pm_.c:21
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: ../../standalone.pm_.c:40
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version name.\n"
msgstr ""

#: ../../standalone.pm_.c:51
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrake tools\n"
"  --incident        - program should be one of mandrake tools"
msgstr ""

#: ../../standalone.pm_.c:57
msgid ""
"Font Importation and monitoring "
"application                                     \n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--strong         : strong verification of font.\n"
"--install        : accept any font file and any directry.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: ../../standalone.pm_.c:68
msgid ""
"[OPTIONS]...\n"
"\t      --debug         print debugging information"
msgstr ""

#: ../../standalone.pm_.c:70
msgid ""
"[OPTIONS]...\n"
"Mandrake Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""

#: ../../standalone.pm_.c:82
#, fuzzy
msgid "[keyboard]"
msgstr "Sleutelbord"

#: ../../standalone.pm_.c:83
msgid "[--file=myfyle] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: ../../standalone.pm_.c:84
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""

#: ../../standalone.pm_.c:93
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: ../../standalone.pm_.c:94
msgid ""
"[OPTION]...\n"
"  --no-confirmation      don't ask first confirmation question in "
"MandrakeUpdate mode\n"
"  --no-verify-rpm        don't verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: ../../standalone.pm_.c:99
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_desc_dir] [--update-usbtable] "
"[--dynamic=dev]"
msgstr ""

#: ../../standalone.pm_.c:100
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: ../../standalone.pm_.c:114
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""

#: ../../standalone.pm_.c:168
#, fuzzy
msgid "Installing packages..."
msgstr "Installeer pakket %s"

#: ../../standalone/XFdrake_.c:138
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"

#: ../../standalone/XFdrake_.c:142
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr "Teken asb. weer in %s om veranderinge te aktiveer"

#: ../../standalone/drakTermServ_.c:239
#, fuzzy
msgid "Mandrake Terminal Server Configuration"
msgstr "Dra drukkerkonfigurasie oor"

#: ../../standalone/drakTermServ_.c:253
#, fuzzy
msgid "Enable Server"
msgstr "Datbasis"

#: ../../standalone/drakTermServ_.c:260
#, fuzzy
msgid "Disable Server"
msgstr "Datbasis"

#: ../../standalone/drakTermServ_.c:268
#, fuzzy
msgid "Start Server"
msgstr "NIS-bediener"

#: ../../standalone/drakTermServ_.c:275
#, fuzzy
msgid "Stop Server"
msgstr "NIS-bediener"

#: ../../standalone/drakTermServ_.c:283
msgid "Etherboot Floppy/ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:288
msgid "Net Boot Images"
msgstr ""

#: ../../standalone/drakTermServ_.c:294
#, fuzzy
msgid "Add/Del Users"
msgstr "Voeg gebruiker by"

#: ../../standalone/drakTermServ_.c:299
#, fuzzy
msgid "Add/Del Clients"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakTermServ_.c:328
msgid ""
"\n"
" Copyright (C) 2002 by MandrakeSoft \n"
"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:332
msgid ""
"\n"
"\n"
" Thanks:\n"
"\t- LTSP Project http://www.ltsp.org\n"
"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:365
msgid ""
"drakTermServ Overview\n"
"\t\t\t   \n"
"        - Create Etherboot Enabled Boot Images:\n"
"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
"must be created.\n"
"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical interface\n"
"        \t\tto help manage/customize these images.\n"
"\n"
"        - Maintain /etc/dhcpd.conf:\n"
"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP address\n"
"        \t\tand net boot images to the machine. drakTermServ helps create/"
"remove these entries.\n"
"\t\t\t\n"
"        \t\t(PCI cards may omit the image - etherboot will request the "
"correct image. You should\n"
"        \t\talso consider that when etherboot looks for the images, it "
"expects names like\n"
"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
"like:\n"
"        \t\t\n"
"\t\t\t\thost curly {\n"
"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
"\t\t\t\t\tfixed-address              192.168.192.3;\n"
"\t\t\t\t\t/*type                          fat;*/\n"
"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
"nbi\";\n"
"\t\t\t\t}\n"
"\t\t\t\n"
"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
"entry for\n"
"\t\t\ta client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"\t\t\tNote: The \"/*type\" entry is only used by drakTermServ.  Clients can "
"either be \"thin\"*/\n"
"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
"while fat clients run most\n"
"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
"$IP=client_ip\\$\\$ is\n"
"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are modified\n"
"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
"issues in using xdmcp,\n"
"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
"subnet.\n"
"\t\t\t\n"
"\t\t\tNote: You must stop/start the server after adding or changing "
"clients.\n"
"\t\t\t\n"
"        - Maintain /etc/exports:\n"
"        \t\tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \t\tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \t\tdiskless clients.\n"
"\n"
"        \t\tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t\t/                  (ro,all_squash)\n"
"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tWith SUBNET/MASK being defined for your network.\n"
"        \t\t\n"
"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
"        \t\tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
"\\$. drakTermServ helps\n"
"        \t\tin this respect by adding or removing system users from this "
"file.\n"
"\n"
"        - Per client /etc/X11XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future drakTermServ "
"will help create these\n"
"        \t\tfiles.\n"
"\n"
"        - Per client system configuration files:\n"
"        \t\tThrough clusternfs, each diskless client can have it's own "
"unique configuration files\n"
"        \t\ton the root filesystem of the server. In the future, "
"drakTermServ can help create files\n"
"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
"keyboard on a per-client\n"
"        \t\tbasis.\n"
"\n"
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ will configure this file to work in conjunction "
"with the images created by\n"
"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to each\n"
"        \t\tdiskless client.\n"
"\n"
"        \t\tA typical tftp configuration file looks like:\n"
"        \t\t\n"
"        \t\tservice tftp\n"
"        \t\t(\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t\t}\n"
"        \t\t\n"
"        \t\tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \t\tputs it's images.\n"
"\n"
"        - Create etherboot floppies/CDs:\n"
"        \t\tThe diskless client machines need either ROM images on the NIC, "
"or a boot floppy\n"
"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
"generate these images,\n"
"        \t\tbased on the NIC in the client machine.\n"
"        \t\t\n"
"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \t\tcat /usr/lib/etherboot/boot1a.bin /\\n        \t\t\t/usr/lib/"
"etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
" \n"
"\n"
msgstr ""

#: ../../standalone/drakTermServ_.c:488
msgid "Boot Floppy"
msgstr ""

#: ../../standalone/drakTermServ_.c:490
msgid "Boot ISO"
msgstr ""

#: ../../standalone/drakTermServ_.c:559
msgid "Build Whole Kernel -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:561 ../../standalone/drakTermServ_.c:591
msgid "This will take a few minutes."
msgstr ""

#: ../../standalone/drakTermServ_.c:573
msgid "No kernel selected!"
msgstr ""

#: ../../standalone/drakTermServ_.c:576
msgid "Build Single NIC -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:587
#, fuzzy
msgid "No nic selected!"
msgstr "Nie gekonnekteer nieKabelkonneksie"

#: ../../standalone/drakTermServ_.c:590
msgid "Build All Kernels -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:604
#, fuzzy
msgid "<-- Delete"
msgstr "Uitwis"

#: ../../standalone/drakTermServ_.c:611
#, fuzzy
msgid "Delete All NBIs"
msgstr "Selekteer lOer"

#: ../../standalone/drakTermServ_.c:668
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: ../../standalone/drakTermServ_.c:673
#, fuzzy
msgid "Add User -->"
msgstr "Voeg gebruiker by"

#: ../../standalone/drakTermServ_.c:681
msgid "<-- Del User"
msgstr ""

#: ../../standalone/drakTermServ_.c:720
#, fuzzy, c-format
msgid "type: %s"
msgstr "Tipe:"

#: ../../standalone/drakTermServ_.c:753
msgid "No net boot images created!"
msgstr ""

#: ../../standalone/drakTermServ_.c:773
#, fuzzy
msgid "Thin Client"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakTermServ_.c:775
#, fuzzy
msgid "Allow Thin Clients"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakTermServ_.c:778
msgid "Add Client -->"
msgstr ""

#: ../../standalone/drakTermServ_.c:821
#, fuzzy
msgid "<-- Edit Client"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakTermServ_.c:837
#, fuzzy
msgid "Delete Client"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakTermServ_.c:843
#, fuzzy
msgid "dhcpd Config..."
msgstr "Konfigurasie in aabou..."

#: ../../standalone/drakTermServ_.c:876
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: ../../standalone/drakTermServ_.c:894
msgid "Subnet:"
msgstr ""

#
#: ../../standalone/drakTermServ_.c:901
#, fuzzy
msgid "Netmask:"
msgstr "Netmasker"

#: ../../standalone/drakTermServ_.c:908
msgid "Routers:"
msgstr ""

#: ../../standalone/drakTermServ_.c:915
msgid "Subnet Mask:"
msgstr ""

#: ../../standalone/drakTermServ_.c:922
msgid "Broadcast Address:"
msgstr ""

#: ../../standalone/drakTermServ_.c:929
#, fuzzy
msgid "Domain Name:"
msgstr "Domeinnaam"

#: ../../standalone/drakTermServ_.c:937
#, fuzzy
msgid "Name Servers:"
msgstr "NIS-bediener"

#: ../../standalone/drakTermServ_.c:948
msgid "IP Range Start:"
msgstr ""

#: ../../standalone/drakTermServ_.c:949
msgid "IP Range End:"
msgstr ""

#: ../../standalone/drakTermServ_.c:1001
#, fuzzy
msgid "dhcpd Server Configuration"
msgstr "Sluit konfigurasie af"

#: ../../standalone/drakTermServ_.c:1002
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: ../../standalone/drakTermServ_.c:1005
msgid "Dynamic IP Address Pool:"
msgstr ""

#: ../../standalone/drakTermServ_.c:1018
#, fuzzy
msgid "Write Config"
msgstr "herkonfigureer"

#: ../../standalone/drakTermServ_.c:1120
#, fuzzy
msgid "Please insert floppy disk:"
msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"

#: ../../standalone/drakTermServ_.c:1124
msgid "Couldn't access the floppy!"
msgstr ""

#: ../../standalone/drakTermServ_.c:1126
msgid "Floppy can be removed now"
msgstr ""

#: ../../standalone/drakTermServ_.c:1129
#, fuzzy
msgid "No floppy drive available!"
msgstr "Geen sagteskyaandrywer beskikbaar nie"

#: ../../standalone/drakTermServ_.c:1138
#, c-format
msgid "Etherboot ISO image is %s"
msgstr ""

#: ../../standalone/drakTermServ_.c:1140
msgid "Something went wrong! - Is mkisofs installed?"
msgstr ""

#: ../../standalone/drakTermServ_.c:1159
msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""

#: ../../standalone/drakTermServ_.c:1451
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: ../../standalone/drakautoinst_.c:40
msgid "Error!"
msgstr "Fout!"

#: ../../standalone/drakautoinst_.c:41
#, c-format
msgid "I can't find needed image file `%s'."
msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."

#: ../../standalone/drakautoinst_.c:43
msgid "Auto Install Configurator"
msgstr "Outoinstallasiekonfigurasieprogram"

#: ../../standalone/drakautoinst_.c:44
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: ../../standalone/drakautoinst_.c:62 ../../standalone/drakautoinst_.c:71
msgid "manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:62
#, fuzzy
msgid "replay"
msgstr "Herspeel"

#: ../../standalone/drakautoinst_.c:66
msgid "Automatic Steps Configuration"
msgstr "Outomatiese Stappe Konfigurasie"

#: ../../standalone/drakautoinst_.c:67
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""

#: ../../standalone/drakautoinst_.c:78 ../../standalone/drakautoinst_.c:79
#, fuzzy
msgid "Creating auto install floppy"
msgstr "Outoinstallasieskyf word geskep."

#: ../../standalone/drakautoinst_.c:139
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""

#: ../../standalone/drakautoinst_.c:234 ../../standalone/drakgw_.c:504
#: ../../standalone/scannerdrake_.c:117
msgid "Congratulations!"
msgstr "Geluk!"

#: ../../standalone/drakautoinst_.c:235
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Die floppie is sukselvol geskep.\n"
"U kan nou weer 'n installasie uitspeel."

#: ../../standalone/drakautoinst_.c:273
#, fuzzy
msgid "Auto Install"
msgstr "Installasie"

#: ../../standalone/drakautoinst_.c:343
#, fuzzy
msgid "Add an item"
msgstr "Voeg 'n gebruiker by"

#: ../../standalone/drakautoinst_.c:350
#, fuzzy
msgid "Remove the last item"
msgstr "Teruglusl�er %s word geformateer"

#: ../../standalone/drakbackup_.c:580
msgid "Cron not available yet as non-root"
msgstr ""

#: ../../standalone/drakbackup_.c:690
msgid "WARNING"
msgstr ""

#: ../../standalone/drakbackup_.c:691
#, fuzzy
msgid "FATAL"
msgstr "FAT"

#: ../../standalone/drakbackup_.c:692
msgid "INFO"
msgstr ""

#: ../../standalone/drakbackup_.c:704
msgid ""
"\n"
"                      DrakBackup Report \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:705
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:709
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:730 ../../standalone/drakbackup_.c:803
#: ../../standalone/drakbackup_.c:859
#, fuzzy
msgid "Total progess"
msgstr "Toetsbladsye"

#: ../../standalone/drakbackup_.c:785
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"Warning: If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""

#: ../../standalone/drakbackup_.c:794
msgid "This may take a moment to generate the keys."
msgstr ""

#: ../../standalone/drakbackup_.c:801
#, c-format
msgid "ERROR: Cannot spawn %s."
msgstr ""

#: ../../standalone/drakbackup_.c:818
#, c-format
msgid "No password prompt on %s at port %s"
msgstr ""

#: ../../standalone/drakbackup_.c:819
#, fuzzy, c-format
msgid "Bad password on %s"
msgstr "Geen wagwoord"

#: ../../standalone/drakbackup_.c:820
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr ""

#: ../../standalone/drakbackup_.c:821
#, fuzzy, c-format
msgid "Can't find %s on %s"
msgstr "Kan nie %s oopmaak nie: %s\n"

#: ../../standalone/drakbackup_.c:824
#, c-format
msgid "%s not responding"
msgstr ""

#: ../../standalone/drakbackup_.c:828
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s\\@%s\n"
"\n"
"without being prompted for a password."
msgstr ""

#: ../../standalone/drakbackup_.c:873
msgid "WebDAV remote site already in sync!"
msgstr ""

#: ../../standalone/drakbackup_.c:877
msgid "WebDAV transfer failed!"
msgstr ""

#: ../../standalone/drakbackup_.c:898
msgid "No CDR/DVDR in drive!"
msgstr ""

#: ../../standalone/drakbackup_.c:902
msgid "Does not appear to be recordable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:906
msgid "Not erasable media!"
msgstr ""

#: ../../standalone/drakbackup_.c:945
msgid "This may take a moment to erase the media."
msgstr ""

#: ../../standalone/drakbackup_.c:1033
msgid "Permission problem accessing CD."
msgstr ""

#: ../../standalone/drakbackup_.c:1060
#, c-format
msgid "No tape in %s!"
msgstr ""

#: ../../standalone/drakbackup_.c:1174 ../../standalone/drakbackup_.c:1223
msgid "Backup system files..."
msgstr ""

#: ../../standalone/drakbackup_.c:1224 ../../standalone/drakbackup_.c:1291
#, fuzzy
msgid "Hard Disk Backup files..."
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1236
#, fuzzy
msgid "Backup User files..."
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1237
msgid "Hard Disk Backup Progress..."
msgstr ""

#: ../../standalone/drakbackup_.c:1290
#, fuzzy
msgid "Backup Other files..."
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1296
#, fuzzy
msgid "No changes to backup!"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1312 ../../standalone/drakbackup_.c:1335
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1319
#, c-format
msgid ""
"file list sent by FTP: %s\n"
" "
msgstr ""

#: ../../standalone/drakbackup_.c:1322
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1340
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1345
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1354
#, fuzzy
msgid " Error during mail sending. \n"
msgstr "Fout met die les van l�er %s"

#: ../../standalone/drakbackup_.c:1380
msgid "Can't create catalog!"
msgstr ""

#: ../../standalone/drakbackup_.c:1490 ../../standalone/drakbackup_.c:1501
#: ../../standalone/drakfont_.c:946
#, fuzzy
msgid "File Selection"
msgstr "Pakketkeuse"

#: ../../standalone/drakbackup_.c:1529
msgid "Select the files or directories and click on 'Add'"
msgstr ""

#: ../../standalone/drakbackup_.c:1573
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1574
msgid ""
"These options can backup and restore all files in your /etc directory.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:1575
#, fuzzy
msgid "Backup your System files. (/etc directory)"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1576
msgid "Use incremental backup  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:1577
msgid "Do not include critical files (passwd, group, fstab)"
msgstr ""

#: ../../standalone/drakbackup_.c:1578
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr ""

#: ../../standalone/drakbackup_.c:1595
#, fuzzy
msgid "Please check all users that you want to include in your backup."
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:1622
msgid "Do not include the browser cache"
msgstr ""

#: ../../standalone/drakbackup_.c:1623 ../../standalone/drakbackup_.c:1647
msgid "Use Incremental Backups  (do not replace old backups)"
msgstr ""

#: ../../standalone/drakbackup_.c:1645 ../../standalone/drakfont_.c:1000
#, fuzzy
msgid "Remove Selected"
msgstr "Verwyder tou"

#: ../../standalone/drakbackup_.c:1679
#, fuzzy
msgid "Windows (FAT32)"
msgstr "Verwyder Windows(TM)"

#: ../../standalone/drakbackup_.c:1714
#, fuzzy
msgid "Users"
msgstr "Gebruikerskode"

#: ../../standalone/drakbackup_.c:1740
#, fuzzy
msgid "Use network connection to backup"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:1742
msgid "Net Method:"
msgstr ""

#: ../../standalone/drakbackup_.c:1746
msgid "Use Expect for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1747
msgid ""
"Create/Transfer\n"
"backup keys for SSH"
msgstr ""

#: ../../standalone/drakbackup_.c:1748
#, fuzzy
msgid ""
"  Transfer  \n"
"Now"
msgstr "Oordrag"

#: ../../standalone/drakbackup_.c:1749
msgid ""
"Other (not drakbackup)\n"
"keys in place already"
msgstr ""

#
#: ../../standalone/drakbackup_.c:1753
#, fuzzy
msgid "Please enter the host name or IP."
msgstr "Toets asb. die muis"

#: ../../standalone/drakbackup_.c:1758
msgid ""
"Please enter the directory (or module) to\n"
" put the backup on this host."
msgstr ""

#: ../../standalone/drakbackup_.c:1763
#, fuzzy
msgid "Please enter your login"
msgstr "Probeer asb. weer"

#: ../../standalone/drakbackup_.c:1768
#, fuzzy
msgid "Please enter your password"
msgstr "Probeer asb. weer"

#: ../../standalone/drakbackup_.c:1774
#, fuzzy
msgid "Remember this password"
msgstr "Geen wagwoord"

#: ../../standalone/drakbackup_.c:1785
msgid "Need hostname, username and password!"
msgstr ""

#: ../../standalone/drakbackup_.c:1879
msgid "Use CD/DVDROM to backup"
msgstr ""

#: ../../standalone/drakbackup_.c:1882
msgid ""
"Please choose your CD/DVD device\n"
"(Press Enter to propogate settings to other fields.\n"
"This field isn't necessary, only a tool to fill in the form.)"
msgstr ""

#: ../../standalone/drakbackup_.c:1887
#, fuzzy
msgid "Please choose your CD/DVD media size (Mb)"
msgstr "Wat is u sleutelborduitleg?"

#: ../../standalone/drakbackup_.c:1893
#, fuzzy
msgid "Please check for multisession CD"
msgstr "Kliek asb. op 'n partisie"

#: ../../standalone/drakbackup_.c:1899
#, fuzzy
msgid "Please check if you are using CDRW media"
msgstr "Kliek asb. op 'n partisie"

#: ../../standalone/drakbackup_.c:1905
#, fuzzy
msgid "Please check if you want to erase your RW media (1st Session)"
msgstr "Kliek asb. op 'n partisie"

#: ../../standalone/drakbackup_.c:1906
#, fuzzy
msgid " Erase Now "
msgstr "Oordrag"

#: ../../standalone/drakbackup_.c:1912
#, fuzzy
msgid "Please check if you are using a DVDR device"
msgstr "Kliek asb. op 'n partisie"

#: ../../standalone/drakbackup_.c:1918
#, fuzzy
msgid "Please check if you are using a DVDRAM device"
msgstr "Kliek asb. op 'n partisie"

#: ../../standalone/drakbackup_.c:1931
msgid ""
"Please enter your CD Writer device name\n"
" ex: 0,1,0"
msgstr ""

#: ../../standalone/drakbackup_.c:1964
#, fuzzy
msgid "No CD device defined!"
msgstr "Selekteer lOer"

#: ../../standalone/drakbackup_.c:2012
#, fuzzy
msgid "Use tape to backup"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:2015
msgid "Please enter the device name to use for backup"
msgstr ""

#: ../../standalone/drakbackup_.c:2021
#, fuzzy
msgid "Please check if you want to use the non-rewinding device."
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2027
#, fuzzy
msgid "Please check if you want to erase your tape before the backup."
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2033
#, fuzzy
msgid "Please check if you want to eject your tape after the backup."
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2039 ../../standalone/drakbackup_.c:2112
#: ../../standalone/drakbackup_.c:3068
msgid ""
"Please enter the maximum size\n"
" allowed for Drakbackup"
msgstr ""

#
#: ../../standalone/drakbackup_.c:2103
#, fuzzy
msgid "Please enter the directory to save to:"
msgstr "Toets asb. die muis"

#: ../../standalone/drakbackup_.c:2118 ../../standalone/drakbackup_.c:3074
#, fuzzy
msgid "Use quota for backup files."
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:2180
#, fuzzy
msgid "Network"
msgstr "Netwerkkoppelvlak"

#: ../../standalone/drakbackup_.c:2185
msgid "CDROM / DVDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:2190
msgid "HardDrive / NFS"
msgstr ""

#: ../../standalone/drakbackup_.c:2195
#, fuzzy
msgid "Tape"
msgstr "Tipe"

#: ../../standalone/drakbackup_.c:2208 ../../standalone/drakbackup_.c:2212
#: ../../standalone/drakbackup_.c:2216
msgid "hourly"
msgstr ""

#: ../../standalone/drakbackup_.c:2209 ../../standalone/drakbackup_.c:2213
#: ../../standalone/drakbackup_.c:2216
msgid "daily"
msgstr ""

#: ../../standalone/drakbackup_.c:2210 ../../standalone/drakbackup_.c:2214
#: ../../standalone/drakbackup_.c:2216
msgid "weekly"
msgstr ""

#: ../../standalone/drakbackup_.c:2211 ../../standalone/drakbackup_.c:2215
#: ../../standalone/drakbackup_.c:2216
msgid "monthly"
msgstr ""

#: ../../standalone/drakbackup_.c:2229
#, fuzzy
msgid "Use daemon"
msgstr "Gebruikerskode"

#: ../../standalone/drakbackup_.c:2234
#, fuzzy
msgid ""
"Please choose the time \n"
"interval between each backup"
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2240
#, fuzzy
msgid ""
"Please choose the\n"
"media for backup."
msgstr "Kies asb. 'n taal om te gebruik."

#: ../../standalone/drakbackup_.c:2247
msgid ""
"Please be sure that the cron daemon is included in your services. \n"
"\n"
"Note that currently all 'net' medias also use the hard drive."
msgstr ""

#: ../../standalone/drakbackup_.c:2283
msgid "Send mail report after each backup to:"
msgstr ""

#: ../../standalone/drakbackup_.c:2289
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""

#: ../../standalone/drakbackup_.c:2324
#, fuzzy
msgid "What"
msgstr "Wag"

#
#: ../../standalone/drakbackup_.c:2329
#, fuzzy
msgid "Where"
msgstr "Wiel"

#
#: ../../standalone/drakbackup_.c:2334
#, fuzzy
msgid "When"
msgstr "Wiel"

#: ../../standalone/drakbackup_.c:2339
#, fuzzy
msgid "More Options"
msgstr "Module opsies:"

#: ../../standalone/drakbackup_.c:2358 ../../standalone/drakbackup_.c:4444
#, fuzzy
msgid "Drakbackup Configuration"
msgstr "Netwerkkonfigurasie"

#: ../../standalone/drakbackup_.c:2376
#, fuzzy
msgid "Please choose where you want to backup"
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2378
msgid "on Hard Drive"
msgstr ""

#: ../../standalone/drakbackup_.c:2388
msgid "across Network"
msgstr ""

#: ../../standalone/drakbackup_.c:2398
msgid "on CDROM"
msgstr ""

#: ../../standalone/drakbackup_.c:2406
msgid "on Tape Device"
msgstr ""

#: ../../standalone/drakbackup_.c:2449
#, fuzzy
msgid "Please choose what you want to backup"
msgstr "Kies die pakkette wat u wil installeer"

#: ../../standalone/drakbackup_.c:2450
#, fuzzy
msgid "Backup system"
msgstr "Stel l�erstelsels op"

#: ../../standalone/drakbackup_.c:2451
msgid "Backup Users"
msgstr ""

#: ../../standalone/drakbackup_.c:2454
msgid "Select user manually"
msgstr ""

#: ../../standalone/drakbackup_.c:2537
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2538
msgid ""
"\n"
"- System Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2540
msgid ""
"\n"
"- User Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2542
msgid ""
"\n"
"- Other Files:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2544
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2547
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2553
msgid ""
"\n"
"- Burn to CD"
msgstr ""

#: ../../standalone/drakbackup_.c:2554
msgid "RW"
msgstr ""

#: ../../standalone/drakbackup_.c:2555
#, fuzzy, c-format
msgid " on device: %s"
msgstr "Muistoestel: %s\n"

#: ../../standalone/drakbackup_.c:2556
msgid " (multi-session)"
msgstr ""

#: ../../standalone/drakbackup_.c:2557
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""

#: ../../standalone/drakbackup_.c:2558
#, c-format
msgid "\t\tErase=%s"
msgstr ""

#: ../../standalone/drakbackup_.c:2561
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2562
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2563
#, fuzzy
msgid ""
"\n"
"- Options:\n"
msgstr "Opsies"

#: ../../standalone/drakbackup_.c:2564
msgid "\tDo not include System Files\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2567
msgid "\tBackups use tar and bzip2\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2569
msgid "\tBackups use tar and gzip\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2572
#, c-format
msgid ""
"\n"
"- Daemon (%s) include:\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2573
msgid "\t-Hard drive.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2574
msgid "\t-CDROM.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2575
msgid "\t-Tape \n"
msgstr ""

#: ../../standalone/drakbackup_.c:2576
msgid "\t-Network by FTP.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2577
msgid "\t-Network by SSH.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2578
msgid "\t-Network by rsync.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2579
msgid "\t-Network by webdav.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2581
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2587
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2754
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:2756
#, fuzzy
msgid "Please uncheck or remove it on next time."
msgstr "Op watter seriaalpoort is u modem gekoppel?"

#: ../../standalone/drakbackup_.c:2766
msgid "Backup files are corrupted"
msgstr ""

#: ../../standalone/drakbackup_.c:2787
msgid "          All of your selected data have been          "
msgstr ""

#: ../../standalone/drakbackup_.c:2788
#, c-format
msgid "          Successfuly Restored on %s       "
msgstr ""

#: ../../standalone/drakbackup_.c:2906
#, fuzzy
msgid "         Restore Configuration       "
msgstr "Netwerkkonfigurasie"

#: ../../standalone/drakbackup_.c:2924
msgid "OK to restore the other files."
msgstr ""

#: ../../standalone/drakbackup_.c:2941
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""

#: ../../standalone/drakbackup_.c:3019
#, fuzzy
msgid "Backup the system files before:"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:3021
#, fuzzy
msgid "please choose the date to restore"
msgstr "Wat is u muistoestel?"

#: ../../standalone/drakbackup_.c:3057
#, fuzzy
msgid "Use Hard Disk to backup"
msgstr "Korrupte rugsteunl�er"

#
#: ../../standalone/drakbackup_.c:3060
#, fuzzy
msgid "Please enter the directory to save:"
msgstr "Toets asb. die muis"

#: ../../standalone/drakbackup_.c:3103
#, fuzzy
msgid "FTP Connection"
msgstr "LAN konneksie"

#: ../../standalone/drakbackup_.c:3110
#, fuzzy
msgid "Secure Connection"
msgstr "Kies drukkerkonneksie"

#: ../../standalone/drakbackup_.c:3134
#, fuzzy
msgid "Restore from Hard Disk."
msgstr "Herstel vanaf floppie"

#: ../../standalone/drakbackup_.c:3136
msgid "Please enter the directory where backups are stored"
msgstr ""

#: ../../standalone/drakbackup_.c:3204
#, fuzzy
msgid "Select another media to restore from"
msgstr "Wat is u muistoestel?"

#: ../../standalone/drakbackup_.c:3206
#, fuzzy
msgid "Other Media"
msgstr "Ander"

#: ../../standalone/drakbackup_.c:3211
#, fuzzy
msgid "Restore system"
msgstr "Installeer stelsel"

#: ../../standalone/drakbackup_.c:3212
#, fuzzy
msgid "Restore Users"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3213
#, fuzzy
msgid "Restore Other"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3215
#, fuzzy
msgid "select path to restore (instead of /)"
msgstr "Wat is u muistoestel?"

#: ../../standalone/drakbackup_.c:3219
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""

#: ../../standalone/drakbackup_.c:3221
msgid "Remove user directories before restore."
msgstr ""

#: ../../standalone/drakbackup_.c:3334
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: ../../standalone/drakbackup_.c:3344
#, fuzzy
msgid ""
"Restore Selected\n"
"Files"
msgstr "Verwyder tou"

#: ../../standalone/drakbackup_.c:3361
#, fuzzy
msgid ""
"Change\n"
"Restore Path"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3427
#, c-format
msgid "Backup files not found at %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3440
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""

#: ../../standalone/drakbackup_.c:3440
#, fuzzy
msgid "Restore From CD"
msgstr "Herstel vanaf floppie"

#: ../../standalone/drakbackup_.c:3442
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3452
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""

#: ../../standalone/drakbackup_.c:3452
#, fuzzy
msgid "Restore From Tape"
msgstr "Reddingspartisietabel"

#: ../../standalone/drakbackup_.c:3454
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr ""

#: ../../standalone/drakbackup_.c:3474
#, fuzzy
msgid "Restore Via Network"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3474
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr ""

#
#: ../../standalone/drakbackup_.c:3475
#, fuzzy
msgid "Host Name"
msgstr "Rekenaarnaam"

#: ../../standalone/drakbackup_.c:3476
msgid "Host Path or Module"
msgstr ""

#: ../../standalone/drakbackup_.c:3483
#, fuzzy
msgid "Password required"
msgstr "Wagwoord"

#: ../../standalone/drakbackup_.c:3489
#, fuzzy
msgid "Username required"
msgstr "Gebruikerskode"

#: ../../standalone/drakbackup_.c:3492
#, fuzzy
msgid "Hostname required"
msgstr "Bedienernaam:"

#: ../../standalone/drakbackup_.c:3497
msgid "Path or Module required"
msgstr ""

#: ../../standalone/drakbackup_.c:3510
msgid "Files Restored..."
msgstr ""

#: ../../standalone/drakbackup_.c:3513
#, fuzzy
msgid "Restore Failed..."
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3751
msgid "Restore all backups"
msgstr ""

#
#: ../../standalone/drakbackup_.c:3760
#, fuzzy
msgid "Custom Restore"
msgstr "Aangepaste"

#: ../../standalone/drakbackup_.c:3804
msgid "CD in place - continue."
msgstr ""

#: ../../standalone/drakbackup_.c:3810
msgid "Browse to new restore repository."
msgstr ""

#: ../../standalone/drakbackup_.c:3813
#, fuzzy
msgid "Restore From Catalog"
msgstr "Reddingspartisietabel"

#: ../../standalone/drakbackup_.c:3841
#, fuzzy
msgid "Restore Progress"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:3883 ../../standalone/drakbackup_.c:3916
#: ../../standalone/drakbackup_.c:3942 ../../standalone/drakbackup_.c:3969
#: ../../standalone/drakbackup_.c:3996 ../../standalone/drakbackup_.c:4056
#: ../../standalone/drakbackup_.c:4083 ../../standalone/drakbackup_.c:4113
#: ../../standalone/drakbackup_.c:4139
#, fuzzy
msgid "Previous"
msgstr "<- Vorige"

#: ../../standalone/drakbackup_.c:3887 ../../standalone/drakbackup_.c:3973
#: ../../standalone/logdrake_.c:203
#, fuzzy
msgid "Save"
msgstr "Toestand"

#: ../../standalone/drakbackup_.c:3946
#, fuzzy
msgid "Build Backup"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:4000 ../../standalone/drakbackup_.c:4544
#, fuzzy
msgid "Restore"
msgstr "Herstel vanaf l�er"

#: ../../standalone/drakbackup_.c:4189
msgid ""
"Error during sendmail.\n"
"  Your report mail was not sent.\n"
"  Please configure sendmail"
msgstr ""

#: ../../standalone/drakbackup_.c:4195
msgid ""
"Error during sending file via FTP.\n"
" Please correct your FTP configuration."
msgstr ""

#
#: ../../standalone/drakbackup_.c:4209
#, fuzzy
msgid ""
"The following packages need to be installed:\n"
" @list_of_rpm_to_install"
msgstr "Die volgende pakkette gaan installeer word"

#: ../../standalone/drakbackup_.c:4232
#, fuzzy
msgid "Please select data to restore..."
msgstr "Kies asb. 'n taal om te gebruik."

#: ../../standalone/drakbackup_.c:4267
#, fuzzy
msgid "Please select media for backup..."
msgstr "Kies asb. 'n taal om te gebruik."

#: ../../standalone/drakbackup_.c:4275
#, fuzzy
msgid "Please select data to backup..."
msgstr "Kies asb. 'n taal om te gebruik."

#: ../../standalone/drakbackup_.c:4293 ../../standalone/drakbackup_.c:4304
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""

#: ../../standalone/drakbackup_.c:4308
msgid "Under Devel ... please wait."
msgstr ""

#: ../../standalone/drakbackup_.c:4382
#, fuzzy
msgid "Backup system files"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:4384
#, fuzzy
msgid "Backup user files"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:4386
#, fuzzy
msgid "Backup other files"
msgstr "Korrupte rugsteunl�er"

#: ../../standalone/drakbackup_.c:4388 ../../standalone/drakbackup_.c:4421
msgid "Total Progress"
msgstr ""

#: ../../standalone/drakbackup_.c:4412
msgid "files sending by FTP"
msgstr ""

#: ../../standalone/drakbackup_.c:4416
#, fuzzy
msgid "Sending files..."
msgstr "Stoor in l�er"

#: ../../standalone/drakbackup_.c:4500
#, fuzzy
msgid "Backup Now from configuration file"
msgstr "Netwerkkonfigurasie"

#: ../../standalone/drakbackup_.c:4505
#, fuzzy
msgid "View Backup Configuration."
msgstr "Netwerkkonfigurasie"

#: ../../standalone/drakbackup_.c:4526
#, fuzzy
msgid "Wizard Configuration"
msgstr "Konfigurasie"

#: ../../standalone/drakbackup_.c:4531
#, fuzzy
msgid "Advanced Configuration"
msgstr "Sluit konfigurasie af"

#: ../../standalone/drakbackup_.c:4536
#, fuzzy
msgid "Backup Now"
msgstr "Stel l�erstelsels op"

#: ../../standalone/drakbackup_.c:4576
msgid "Drakbackup"
msgstr ""

#: ../../standalone/drakbackup_.c:4624
msgid ""
"options description:\n"
"\n"
" In this step Drakbackup allow you to change:\n"
"\n"
" - The compression mode:\n"
"    \n"
"      If you check bzip2 compression, you will compress\n"
"      your data better than gzip (about 2-10 %).\n"
"      This option is not checked by default because\n"
"      this compression mode needs more time (about 1000% more).\n"
" \n"
" - The update mode:\n"
"\n"
"      This option will update your backup, but this\n"
"      option is not really useful because you need to\n"
"      decompress your backup before you can update it.\n"
"      \n"
" - the .backupignore mode:\n"
"\n"
"      Like with cvs, Drakbackup will ignore all references\n"
"      included in .backupignore files in each directories.\n"
"      ex: \n"
"         /*> cat .backupignore*/\n"
"         *.o\n"
"         *~\n"
"         ...\n"
"      \n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4654
msgid ""
"\n"
" Some errors during sendmail are caused by \n"
" a bad configuration of postfix. To solve it you have to\n"
" set myhostname or mydomain in /etc/postfix/main.cf\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4662
msgid ""
"options description:\n"
"\n"
" - Backup system files:\n"
"       \n"
"\tThis option allows you to backup your /etc directory,\n"
"\twhich contains all configuration files. Please be\n"
"\tcareful during the restore step to not overwrite:\n"
"\t\t/etc/passwd \n"
"\t\t/etc/group \n"
"\t\t/etc/fstab\n"
"\n"
" - Backup User files: \n"
"\n"
"\tThis option allows you select all users that you want \n"
"\tto backup.\n"
"\tTo preserve disk space, it is recommended that you \n"
"\tdo not include web browser's cache.\n"
"\n"
" - Backup Other files: \n"
"\n"
"\tThis option allows you to add more data to save.\n"
"\tWith the other backup it's not possible at the \n"
"\tmoment to select incremental backup.\t\t\n"
" \n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption for backup. This option allows you \n"
"\tto backup all your data the first time, and \n"
"\tonly the changed afterward.\n"
"\tThen you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4701
msgid ""
"restore description:\n"
" \n"
"Only the most recent date will be used, because with incremental \n"
"backups it is necessary to restore one by one each older backup.\n"
"\n"
"So if you don't want to restore a user please unselect all their\n"
"check boxes.\n"
"\n"
"Otherwise, you are able to select only one of these.\n"
"\n"
" - Incremental Backups:\n"
"\n"
"\tThe incremental backup is the most powerful \n"
"\toption to use. This option allows you to \n"
"\tbackup all of your data the first time, and \n"
"\tonly the changed data after.\n"
"\tSo you will be able, during the restore\n"
"\tstep, to restore your data from a specified\n"
"\tdate.\n"
"\tIf you have not selected this option all\n"
"\told backups are deleted before each backup.    \n"
"\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4727
msgid ""
" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
"fr>"
msgstr ""

#: ../../standalone/drakbackup_.c:4729
msgid ""
" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
msgstr ""

#: ../../standalone/drakbackup_.c:4732
msgid ""
"Description:\n"
"\n"
"  Drakbackup is used to backup your system.\n"
"  During the configuration you can select: \n"
"\t- System files, \n"
"\t- Users files, \n"
"\t- Other files.\n"
"\tor All your system ...  and Other (like Windows Partitions)\n"
"\n"
"  Drakbackup allows you to backup your system on:\n"
"\t- Harddrive.\n"
"\t- NFS.\n"
"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
"\t- FTP.\n"
"\t- Rsync.\n"
"\t- Webdav.\n"
"\t- Tape.\n"
"\n"
"  Drakbackup allows you to restore your system to\n"
"  a user selected directory.\n"
"\n"
"  Per default all backup will be stored on your\n"
"  /var/lib/drakbackup directory\n"
"\n"
"  Configuration file:\n"
"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
"\n"
"Restore Step:\n"
"  \n"
"  During the restore step, DrakBackup will remove \n"
"  your original directory and verify that all \n"
"  backup files are not corrupted. It is recommended \n"
"  you do a last backup before restoring.\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4769
msgid ""
"options description:\n"
"\n"
"Please be careful when you are using ftp backup, because only \n"
"backups that are already built are sent to the server.\n"
"So at the moment, you need to build the backup on your hard \n"
"drive before sending it to the server.\n"
"\n"
msgstr ""

#: ../../standalone/drakbackup_.c:4778
msgid ""
"\n"
"Restore Backup Problems:\n"
"\n"
"During the restore step, Drakbackup will verify all your\n"
"backup files before restoring them.\n"
"Before the restore, Drakbackup will remove \n"
"your original directory, and you will loose all your \n"
"data. It is important to be careful and not modify the \n"
"backup data files by hand.\n"
msgstr ""

#: ../../standalone/drakboot_.c:50
#, c-format
msgid "Installation of %s failed. The following error occured:"
msgstr "%s installasie het gefaal a.g.v. hierdie fout: "

#: ../../standalone/drakbug_.c:45
msgid "Mandrake Bug Report Tool"
msgstr ""

#: ../../standalone/drakbug_.c:50
msgid "First Time Wizard"
msgstr ""

#: ../../standalone/drakbug_.c:51
msgid "Synchronization tool"
msgstr ""

#: ../../standalone/drakbug_.c:52 ../../standalone/drakbug_.c:66
#: ../../standalone/drakbug_.c:133 ../../standalone/drakbug_.c:135
#: ../../standalone/drakbug_.c:139
#, fuzzy
msgid "Standalone Tools"
msgstr "Konsole hulpprogramme"

#: ../../standalone/drakbug_.c:53
msgid "HardDrake"
msgstr ""

#: ../../standalone/drakbug_.c:54
#, fuzzy
msgid "Mandrake Online"
msgstr "Beheersentrum"

#: ../../standalone/drakbug_.c:55
#, fuzzy
msgid "Menudrake"
msgstr "verpligtend"

#: ../../standalone/drakbug_.c:56
#, fuzzy
msgid "Msec"
msgstr "Muis"

#
#: ../../standalone/drakbug_.c:57
#, fuzzy
msgid "Remote Control"
msgstr "Eksterne drukker"

#: ../../standalone/drakbug_.c:58
#, fuzzy
msgid "Software Manager"
msgstr "Drukkernaam:"

#: ../../standalone/drakbug_.c:59
msgid "Urpmi"
msgstr ""

#: ../../standalone/drakbug_.c:60
msgid "Windows Migration tool"
msgstr ""

#: ../../standalone/drakbug_.c:61
#, fuzzy
msgid "Userdrake"
msgstr "Drukker"

#: ../../standalone/drakbug_.c:62
#, fuzzy
msgid "Configuration Wizards"
msgstr "Netwerkkonfigurasie-assistent"

#: ../../standalone/drakbug_.c:75
#, fuzzy
msgid "Application:"
msgstr "Magtiging"

#: ../../standalone/drakbug_.c:76
#, fuzzy
msgid "Package: "
msgstr "Pakketkeuse"

#: ../../standalone/drakbug_.c:77
msgid "Kernel:"
msgstr ""

#: ../../standalone/drakbug_.c:78
#, fuzzy
msgid "Release: "
msgstr "Wag asb."

#: ../../standalone/drakbug_.c:93
msgid ""
"\n"
"\n"
"To submit a bug report, click on the button report.\n"
"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
" where you'll find a form to fill in.The information displayed above will "
"be \n"
"transferred to that server\n"
"\n"
msgstr ""

#: ../../standalone/drakbug_.c:112
#, fuzzy
msgid "Report"
msgstr "Poort"

#: ../../standalone/drakbug_.c:148
#, fuzzy
msgid "Not installed"
msgstr "Verlaay installasie"

#: ../../standalone/drakbug_.c:160
#, fuzzy
msgid "Package not installed"
msgstr "Verlaay installasie"

#: ../../standalone/drakbug_.c:173
msgid "connecting to Bugzilla wizard ..."
msgstr ""

#: ../../standalone/drakbug_.c:180
#, fuzzy
msgid "No browser available! Please install one"
msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."

#: ../../standalone/drakconnect_.c:75
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Netwerkkonfigurasie (%d toestelle)"

#: ../../standalone/drakconnect_.c:83 ../../standalone/drakconnect_.c:591
msgid "Profile: "
msgstr "Profiel:"

#: ../../standalone/drakconnect_.c:91
msgid "Del profile..."
msgstr "Vee profiel uit..."

#: ../../standalone/drakconnect_.c:97
msgid "Profile to delete:"
msgstr "Profiel om uit te vee..."

#: ../../standalone/drakconnect_.c:125
msgid "New profile..."
msgstr "Nuwe profiel..."

#: ../../standalone/drakconnect_.c:131
msgid ""
"Name of the profile to create (the new profile is created as a copy of the "
"current one) :"
msgstr ""

#: ../../standalone/drakconnect_.c:157
msgid "Hostname: "
msgstr "Bedienernaam:"

#: ../../standalone/drakconnect_.c:164
msgid "Internet access"
msgstr "Internettoegang"

#: ../../standalone/drakconnect_.c:177
msgid "Type:"
msgstr "Tipe:"

#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372
msgid "Gateway:"
msgstr "Portaal:"

#: ../../standalone/drakconnect_.c:180 ../../standalone/drakconnect_.c:372
msgid "Interface:"
msgstr "Koppelvlak:"

#: ../../standalone/drakconnect_.c:191
msgid "Status:"
msgstr "Status:"

#: ../../standalone/drakconnect_.c:198 ../../standalone/net_monitor_.c:145
msgid "Wait please"
msgstr ""

#: ../../standalone/drakconnect_.c:216
msgid "Configure Internet Access..."
msgstr "Konfigureer internettoegang..."

#: ../../standalone/drakconnect_.c:223 ../../standalone/drakconnect_.c:445
msgid "LAN configuration"
msgstr "LAN-konfigurasie"

#: ../../standalone/drakconnect_.c:228
msgid "Driver"
msgstr "Drywer"

#: ../../standalone/drakconnect_.c:228
msgid "Interface"
msgstr "Koppelvlak"

#: ../../standalone/drakconnect_.c:228
msgid "Protocol"
msgstr "Protokol"

#: ../../standalone/drakconnect_.c:228
msgid "State"
msgstr "Toestand"

#: ../../standalone/drakconnect_.c:240
msgid "Configure Local Area Network..."
msgstr "Stel plaaslike netwerk op..."

#: ../../standalone/drakconnect_.c:252
msgid "Click here to launch the wizard ->"
msgstr ""

#: ../../standalone/drakconnect_.c:253
msgid "Wizard..."
msgstr "Assistent..."

#: ../../standalone/drakconnect_.c:279
msgid "Apply"
msgstr "Pas toe"

#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403
#: ../../standalone/net_monitor_.c:457
msgid "Connected"
msgstr "Gekonnekteer"

#: ../../standalone/drakconnect_.c:380 ../../standalone/drakconnect_.c:403
#: ../../standalone/net_monitor_.c:457
msgid "Not connected"
msgstr "Nie gekonnekteer nieKabelkonneksie"

#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404
msgid "Connect..."
msgstr "Konnekteer..."

#: ../../standalone/drakconnect_.c:381 ../../standalone/drakconnect_.c:404
msgid "Disconnect..."
msgstr "Diskonnekteer..."

#: ../../standalone/drakconnect_.c:400
msgid ""
"Warning, another Internet connection has been detected, maybe using your "
"network"
msgstr ""

#: ../../standalone/drakconnect_.c:427
msgid ""
"You don't have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/drakconnect_.c:449
msgid "LAN Configuration"
msgstr "LAN konfigurasie"

#: ../../standalone/drakconnect_.c:460
#, c-format
msgid "Adapter %s: %s"
msgstr "Toestel %s: %s"

#: ../../standalone/drakconnect_.c:466
msgid "Boot Protocol"
msgstr "Herlaaiprotokol"

#: ../../standalone/drakconnect_.c:467
msgid "Started on boot"
msgstr "Gelaai tydens herlaaityd"

#: ../../standalone/drakconnect_.c:468
msgid "DHCP client"
msgstr "DHCP-kli�nt"

#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496
msgid "activate now"
msgstr "Aktiveer nou dadelik"

#: ../../standalone/drakconnect_.c:493 ../../standalone/drakconnect_.c:496
msgid "deactivate now"
msgstr "deaktiveer nou dadelik"

#: ../../standalone/drakconnect_.c:499
msgid ""
"This interface has not been configured yet.\n"
"Launch the configuration wizard in the main window"
msgstr ""

#: ../../standalone/drakconnect_.c:556
msgid ""
"You don't have any internet connection.\n"
"Create one first by clicking on 'Configure'"
msgstr ""

#: ../../standalone/drakconnect_.c:580
msgid "Internet connection configuration"
msgstr "Internetkonneksiekonfigurasie"

#: ../../standalone/drakconnect_.c:584
msgid "Internet Connection Configuration"
msgstr "Internetkonneksiekonfigurasie"

#: ../../standalone/drakconnect_.c:593 ../../standalone/net_monitor_.c:94
msgid "Connection type: "
msgstr "Konneksietipe:"

#: ../../standalone/drakconnect_.c:599
msgid "Parameters"
msgstr "Parameters"

#: ../../standalone/drakconnect_.c:618
msgid "Gateway"
msgstr "Portaal"

#: ../../standalone/drakconnect_.c:627
msgid "Ethernet Card"
msgstr "Ethernetkaart"

#: ../../standalone/drakconnect_.c:628
msgid "DHCP Client"
msgstr "DHCP-Kli�nt"

#: ../../standalone/drakfloppy_.c:39
msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
msgstr "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"

#: ../../standalone/drakfloppy_.c:40
msgid "Module name"
msgstr "Modulenaam"

#: ../../standalone/drakfloppy_.c:40
msgid "Size"
msgstr "Grootte"

#: ../../standalone/drakfloppy_.c:45
msgid "drakfloppy"
msgstr "drakfloppy"

#: ../../standalone/drakfloppy_.c:63
msgid "boot disk creation"
msgstr "herlaaiskyfskepping"

#: ../../standalone/drakfloppy_.c:71 ../../standalone/drakfloppy_.c:84
msgid "default"
msgstr "verstek"

#: ../../standalone/drakfloppy_.c:87
#, c-format
msgid "DrakFloppy Error: %s"
msgstr "DrakFloppy Fout: %s"

#: ../../standalone/drakfloppy_.c:98
msgid "kernel version"
msgstr "bedryfstelselkernweergawe"

#: ../../standalone/drakfloppy_.c:104
msgid "General"
msgstr "Algemeen"

#: ../../standalone/drakfloppy_.c:109
msgid "Expert Area"
msgstr "Kundige area"

#: ../../standalone/drakfloppy_.c:112
msgid "mkinitrd optional arguments"
msgstr "mkinitrd opsionele parameters"

#: ../../standalone/drakfloppy_.c:113
msgid "Add a module"
msgstr "Voeg module by"

#: ../../standalone/drakfloppy_.c:133
msgid "force"
msgstr "forseer"

#: ../../standalone/drakfloppy_.c:134
msgid "if needed"
msgstr "indien nodig"

#: ../../standalone/drakfloppy_.c:135
msgid "omit scsi modules"
msgstr "laat SCSI-modules weg"

#: ../../standalone/drakfloppy_.c:136
msgid "omit raid modules"
msgstr "laat RAID-modules weg"

#: ../../standalone/drakfloppy_.c:172
msgid "Remove a module"
msgstr "Verwyder module"

#: ../../standalone/drakfloppy_.c:194
msgid "Output"
msgstr "Uitset"

#: ../../standalone/drakfloppy_.c:206
msgid "Build the disk"
msgstr "Bou die skyf"

#: ../../standalone/drakfloppy_.c:336
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"

#: ../../standalone/drakfloppy_.c:341
#, fuzzy, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"Daar is geen medium for toestel %s nie.\n"
"Sit asb. een in."

#: ../../standalone/drakfloppy_.c:344
#, c-format
msgid "Unable to fork: %s"
msgstr "Kon nie vurk nie: %s"

#: ../../standalone/drakfloppy_.c:349
#, c-format
msgid ""
"Unable to close properly mkbootdisk: \n"
" %s \n"
" %s"
msgstr ""
"Kon nie mkbootdisk ordentelik afsluit nie:\n"
" %s \n"
" %s"

#: ../../standalone/drakfont_.c:213
msgid "Search installed fonts"
msgstr ""

#: ../../standalone/drakfont_.c:215
msgid "Unselect fonts installed"
msgstr ""

#: ../../standalone/drakfont_.c:239
msgid "parse all fonts"
msgstr ""

#: ../../standalone/drakfont_.c:242
#, fuzzy
msgid "no fonts found"
msgstr "%s is nie gevind nie"

#: ../../standalone/drakfont_.c:251 ../../standalone/drakfont_.c:305
#: ../../standalone/drakfont_.c:361 ../../standalone/drakfont_.c:454
#: ../../standalone/drakfont_.c:466 ../../standalone/drakfont_.c:493
#: ../../standalone/drakfont_.c:514 ../../standalone/drakfont_.c:532
#, fuzzy
msgid "done"
msgstr "Klaar"

#: ../../standalone/drakfont_.c:257
msgid "could not find any font in your mounted partitions"
msgstr ""

#: ../../standalone/drakfont_.c:303
msgid "Reselect correct fonts"
msgstr ""

#: ../../standalone/drakfont_.c:307
msgid "could not find any font.\n"
msgstr ""

#: ../../standalone/drakfont_.c:331
msgid "Search fonts in installed list"
msgstr ""

#: ../../standalone/drakfont_.c:359
#, fuzzy
msgid "Fonts copy"
msgstr "Formatteer floppie"

#: ../../standalone/drakfont_.c:363
#, fuzzy
msgid "True Type fonts installation"
msgstr "Berei installasie voor"

#: ../../standalone/drakfont_.c:371
msgid "please wait during ttmkfdir..."
msgstr ""

#: ../../standalone/drakfont_.c:377
msgid "True Type install done"
msgstr ""

#: ../../standalone/drakfont_.c:386 ../../standalone/drakfont_.c:413
msgid "Fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:392 ../../standalone/drakfont_.c:417
#: ../../standalone/drakfont_.c:450
msgid "type1inst building"
msgstr ""

#: ../../standalone/drakfont_.c:403 ../../standalone/drakfont_.c:427
msgid "Ghostscript referencing"
msgstr ""

#: ../../standalone/drakfont_.c:437
msgid "ttf fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:444
msgid "pfm fonts conversion"
msgstr ""

#: ../../standalone/drakfont_.c:456
msgid "Suppress temporary Files"
msgstr ""

#: ../../standalone/drakfont_.c:459
#, fuzzy
msgid "Restart XFS"
msgstr "Laai dit"

#: ../../standalone/drakfont_.c:512 ../../standalone/drakfont_.c:526
msgid "Suppress Fonts Files"
msgstr ""

#: ../../standalone/drakfont_.c:528
#, fuzzy
msgid "xfs restart"
msgstr "beperk"

#: ../../standalone/drakfont_.c:536 ../../standalone/drakfont_.c:902
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"-You can install the fonts using the normal way. In rare cases, bogus fonts "
"may hang up your X Server."
msgstr ""

#: ../../standalone/drakfont_.c:621
#, fuzzy
msgid "Fonts Importation"
msgstr "Formateer partisies"

#: ../../standalone/drakfont_.c:650
msgid "Get Windows Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:658
#, fuzzy
msgid "Uninstall Fonts"
msgstr "De�nstallasie van RPMs"

#: ../../standalone/drakfont_.c:669
#, fuzzy
msgid "Advanced Options"
msgstr "Sluit konfigurasie af"

#: ../../standalone/drakfont_.c:677
#, fuzzy
msgid "Font List"
msgstr "Hegpunt"

#: ../../standalone/drakfont_.c:737
msgid ""
"\n"
" Copyright (C) 2001-2002 by MandrakeSoft \n"
"\tDUPONT Sebastien sdupont\\@mandrakesoft.com\n"
"\n"
" This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
"\n"
" Thanks:\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakfont_.c:793
msgid ""
"drakfont Future Overview\n"
"        - Fonts import:\n"
"                pfb ( Adobe Type 1 binary )\n"
"                pfa ( Adobe Type 1 ASCII )\n"
"                ttf ( True-Type  )\n"
"                pcf.gz\n"
"                Speedo\n"
"                and Bitmap (PCF, BDF, and SNF)\n"
"        - Features\n"
"                - Install fonts from any directory\n"
"                - Get windows fonts on any vfat partitions\n"
"                - Get fonts on any partitions.\n"
"                - UN-installation of any fonts (even if not installed "
"through drakfont)\n"
"        - Support\n"
"              - Xfs\n"
"              - ghostscript & printer\n"
"              - Staroffice & printer\n"
"              - abiword\n"
"\t      - netscape\n"
"              - Koffice, Gnumeric, ... studying\n"
"              - all fonts supported by printer\n"
"              - anti-aliases by RENDER in Xfree86 .... \n"
"\t\t\t\tsupported by KDE.\n"
"\t\t\t\twill be supported by gnome 1.2.\n"
"Visual Interface:\n"
"        Window interface:\n"
"          - Fontselectiondialog widget\n"
"          - Command buttons under Fontselectiondialog (like the actual "
"frontend).\n"
"        Commands buttons:\n"
"          - import from windows partition.\n"
"                import from all fat32 partitions and look for winnt/windows/"
"font\n"
"                and import all (delete doublon) but don't import if already "
"exist.\n"
"          - import from directory\n"
"                look for if it exist before for each font and not delete the "
"original.\n"
"                (replace all, no, none)\n"
"                expert options:\n"
"                        ask the directory, and look for if it exist before\n"
"                        if it exist ask: (replace all, no, none)\n"
"          - uninstall with list per font type\n"
"        Expert additional switch\n"
"          - option support:   ghostscript, Staroffice, etc...\n"
"                check-button. (by default all check)\n"
"          - Printer Application Fonts Support...\n"
"\n"
"\n"
msgstr ""

#: ../../standalone/drakfont_.c:862
#, fuzzy
msgid "Choose the applications that will support the fonts:"
msgstr "Kies die partisies om te formatteer"

#: ../../standalone/drakfont_.c:870
msgid "Ghostscript"
msgstr ""

#: ../../standalone/drakfont_.c:877
#, fuzzy
msgid "StarOffice"
msgstr "Kantoor"

#: ../../standalone/drakfont_.c:884
#, fuzzy
msgid "Abiword"
msgstr "Aborteer"

#: ../../standalone/drakfont_.c:891
#, fuzzy
msgid "Generic Printers"
msgstr "Drukker"

#: ../../standalone/drakfont_.c:958
msgid "Select the font file or directory and click on 'Add'"
msgstr ""

#: ../../standalone/drakfont_.c:1005
#, fuzzy
msgid "Install List"
msgstr "Installeer stelsel"

#: ../../standalone/drakfont_.c:1048
msgid "click here if you are sure."
msgstr ""

#: ../../standalone/drakfont_.c:1055
msgid "here if no."
msgstr ""

#: ../../standalone/drakfont_.c:1112
msgid "Unselected All"
msgstr ""

#: ../../standalone/drakfont_.c:1116
#, fuzzy
msgid "Selected All"
msgstr "Selekteer lOer"

#
#: ../../standalone/drakfont_.c:1120
#, fuzzy
msgid "Remove List"
msgstr "Verwyder drukker"

#: ../../standalone/drakfont_.c:1142 ../../standalone/drakfont_.c:1175
#, fuzzy
msgid "Initials tests"
msgstr "Beginboodskap"

#: ../../standalone/drakfont_.c:1145
#, fuzzy
msgid "Copy fonts on your system"
msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"

#: ../../standalone/drakfont_.c:1149
msgid "Install & convert Fonts"
msgstr ""

#: ../../standalone/drakfont_.c:1153
#, fuzzy
msgid "Post Install"
msgstr "Installasie"

#: ../../standalone/drakfont_.c:1178
#, fuzzy
msgid "Remove fonts on your system"
msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"

#: ../../standalone/drakfont_.c:1182
#, fuzzy
msgid "Post Uninstall"
msgstr "Verlaay installasie"

#: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:182
msgid "Internet Connection Sharing"
msgstr "Internetkonneksiedeling"

#: ../../standalone/drakgw_.c:114
msgid "Sorry, we support only 2.4 kernels."
msgstr ""

#: ../../standalone/drakgw_.c:125
msgid "Internet Connection Sharing currently enabled"
msgstr "Internetkonneksiedeling is ontsper"

#: ../../standalone/drakgw_.c:126
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
"Dis tans aktief.\n"
"\n"
"Wat wil u doen?"

#: ../../standalone/drakgw_.c:130
msgid "disable"
msgstr "deaktiveer"

#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154
msgid "dismiss"
msgstr "ignoreer/sien oor"

#: ../../standalone/drakgw_.c:130 ../../standalone/drakgw_.c:154
msgid "reconfigure"
msgstr "herkonfigureer"

#: ../../standalone/drakgw_.c:133
msgid "Disabling servers..."
msgstr "Bedieners word gedeaktiveer..."

#: ../../standalone/drakgw_.c:142
msgid "Internet connection sharing is now disabled."
msgstr "Internetkonneksiedeling is gedeaktiveer"

#: ../../standalone/drakgw_.c:149
msgid "Internet Connection Sharing currently disabled"
msgstr "Internetkonneksiedeling is gesper"

#: ../../standalone/drakgw_.c:150
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
"Dis tans gedeaktiveer.\n"
"\n"
"Wat wil u doen?"

#: ../../standalone/drakgw_.c:154
msgid "enable"
msgstr "Aktiveer"

#: ../../standalone/drakgw_.c:161
msgid "Enabling servers..."
msgstr "Bedieneers word aktiveer..."

#: ../../standalone/drakgw_.c:166
msgid "Internet connection sharing is now enabled."
msgstr "Internetkonneksiedeling is geaktiveer"

#: ../../standalone/drakgw_.c:183
#, fuzzy
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Nou dat u internetkonfigurasie opgestel is,\n"
"moet u die rekenaar opstel om dit te deel.\n"
"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
"stel.\n"
"\n"
"Wil u internetdeling opstel?\n"

#: ../../standalone/drakgw_.c:211
#, c-format
msgid "Interface %s (using module %s)"
msgstr "Koppelvlak %s (met module %s)"

#: ../../standalone/drakgw_.c:212
#, c-format
msgid "Interface %s"
msgstr "Koppelvlak %s"

#: ../../standalone/drakgw_.c:220
msgid "No network adapter on your system!"
msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"

#: ../../standalone/drakgw_.c:221
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
"hardewarekonfigurasieprogram."

#: ../../standalone/drakgw_.c:227
msgid "Network interface"
msgstr "Netwerkkoppelvlak"

#
#: ../../standalone/drakgw_.c:228
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
"\n"
"%s\n"
"\n"
"Ek gaan nou u LAN met daardie kaart opstel."

#: ../../standalone/drakgw_.c:235
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."

#: ../../standalone/drakgw_.c:261
#, fuzzy
msgid "Network interface already configured"
msgstr "Monitor is nie opgestel nie"

#: ../../standalone/drakgw_.c:262
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""

#: ../../standalone/drakgw_.c:267
#, fuzzy
msgid "Automatic reconfiguration"
msgstr "Outomatiese CUPS konfigurasie"

#: ../../standalone/drakgw_.c:267
msgid "No (experts only)"
msgstr ""

#: ../../standalone/drakgw_.c:268
#, fuzzy
msgid "Show current interface configuration"
msgstr "Verander drukkerkonfigurasie"

#: ../../standalone/drakgw_.c:269
#, fuzzy
msgid "Current interface configuration"
msgstr "Verander drukkerkonfigurasie"

#: ../../standalone/drakgw_.c:270
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""

#: ../../standalone/drakgw_.c:283
msgid ""
"I can keep your current configuration and assume you already set up a DHCP "
"server; in that case please verify I correctly read the Network that you use "
"for your local network; I will not reconfigure it and I will not touch your "
"DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. "
"You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Else, I can reconfigure your interface and (re)configure a DHCP server for "
"you.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw_.c:290
#, fuzzy
msgid "Local Network adress"
msgstr "geen netwerkkaart gevind nie"

#: ../../standalone/drakgw_.c:294
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you don't know the meaning of an option, simply leave it as it is.\n"
"\n"
msgstr ""

#: ../../standalone/drakgw_.c:300
#, fuzzy
msgid "(This) DHCP Server IP"
msgstr "CUPS-bediener IP:"

#: ../../standalone/drakgw_.c:301
#, fuzzy
msgid "The DNS Server IP"
msgstr "CUPS-bediener IP:"

#: ../../standalone/drakgw_.c:302
#, fuzzy
msgid "The internal domain name"
msgstr "Nuwe drukkernaam"

#: ../../standalone/drakgw_.c:303
msgid "The DHCP start range"
msgstr ""

#: ../../standalone/drakgw_.c:304
msgid "The DHCP end range"
msgstr ""

#: ../../standalone/drakgw_.c:305
msgid "The default lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw_.c:306
msgid "The maximum lease (in seconds)"
msgstr ""

#: ../../standalone/drakgw_.c:307
msgid "Re-configure interface and DHCP server"
msgstr ""

#: ../../standalone/drakgw_.c:314
msgid "The Local Network did not finish with `.0', bailing out."
msgstr ""

#: ../../standalone/drakgw_.c:325
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"

#: ../../standalone/drakgw_.c:335
msgid "Configuring..."
msgstr "Konfigurasie in aabou..."

#: ../../standalone/drakgw_.c:336
msgid "Configuring scripts, installing software, starting servers..."
msgstr ""
"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."

#: ../../standalone/drakgw_.c:372
#, c-format
msgid "Problems installing package %s"
msgstr "Probleme met Installasue van pakket %s"

#: ../../standalone/drakgw_.c:505
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP)."
msgstr ""

#: ../../standalone/drakgw_.c:523
msgid "The setup has already been done, but it's currently disabled."
msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."

#: ../../standalone/drakgw_.c:524
msgid "The setup has already been done, and it's currently enabled."
msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."

#: ../../standalone/drakgw_.c:525
msgid "No Internet Connection Sharing has ever been configured."
msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."

#: ../../standalone/drakgw_.c:531
msgid "Internet connection sharing configuration"
msgstr "Internetkonneksiedelingkonfigurasie"

#: ../../standalone/drakgw_.c:539
#, fuzzy, c-format
msgid ""
"Welcome to the Internet Connection Sharing utility!\n"
"\n"
"%s\n"
"\n"
"Click on Configure to launch the setup wizard."
msgstr "Internetkonneksiedeling"

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "group"
msgstr "Werkgroep:"

#: ../../standalone/drakperm_.c:36
msgid "path"
msgstr ""

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "permissions"
msgstr "partisie %s"

#: ../../standalone/drakperm_.c:36
#, fuzzy
msgid "user"
msgstr "Gebruikerskode"

#: ../../standalone/drakperm_.c:43
msgid "Up"
msgstr ""

#: ../../standalone/drakperm_.c:44
#, fuzzy
msgid "delete"
msgstr "Uitwis"

#: ../../standalone/drakperm_.c:45
msgid "edit"
msgstr ""

#: ../../standalone/drakperm_.c:46
#, fuzzy
msgid "Down"
msgstr "Klaar"

#: ../../standalone/drakperm_.c:47
#, fuzzy
msgid "add a rule"
msgstr "Voeg module by"

#: ../../standalone/drakperm_.c:48
msgid "select perm file to see/edit"
msgstr ""

#: ../../standalone/drakperm_.c:51
msgid ""
"Drakperm is used to see files to use in order to fix permissions, owners, "
"and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""

#: ../../standalone/drakperm_.c:56
#, fuzzy
msgid "Add a new rule at the end"
msgstr "Voeg drukker by"

#: ../../standalone/drakperm_.c:57
msgid "Edit curent rule"
msgstr ""

#: ../../standalone/drakperm_.c:58
msgid "Up selected rule one level"
msgstr ""

#: ../../standalone/drakperm_.c:59
msgid "Down selected rule one level"
msgstr ""

#: ../../standalone/drakperm_.c:60
#, fuzzy
msgid "Delete selected rule"
msgstr "Verwyder tou"

#: ../../standalone/drakperm_.c:224
msgid "browse"
msgstr ""

#: ../../standalone/drakperm_.c:231
#, fuzzy
msgid "Current user"
msgstr "Aanvaar gebruiker"

#: ../../standalone/drakperm_.c:236
#, fuzzy
msgid "Permissions"
msgstr "Weergawe: %s\n"

#: ../../standalone/drakperm_.c:237
msgid "Path"
msgstr ""

#: ../../standalone/drakperm_.c:238
#, fuzzy
msgid "Property"
msgstr "Poort"

#: ../../standalone/drakperm_.c:240
msgid "sticky-bit"
msgstr ""

#: ../../standalone/drakperm_.c:241
msgid "Set-UID"
msgstr ""

#: ../../standalone/drakperm_.c:242
msgid "Set-GID"
msgstr ""

#: ../../standalone/drakperm_.c:296
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""

#: ../../standalone/drakperm_.c:297
#, fuzzy
msgid "Use owner id for execution"
msgstr "Gebruik outobespeuring"

#: ../../standalone/drakperm_.c:298
#, fuzzy
msgid "Use group id for execution"
msgstr "Gebruik outobespeuring"

#: ../../standalone/drakperm_.c:299
msgid "when checked, owner and group won't be changed"
msgstr ""

#: ../../standalone/drakperm_.c:304
#, fuzzy
msgid "Path selection"
msgstr "Stoor pakketseleksie"

#: ../../standalone/drakperm_.c:350
#, fuzzy
msgid "user :"
msgstr "Gebruikerskode"

#: ../../standalone/drakperm_.c:352
#, fuzzy
msgid "group :"
msgstr "Werkgroep:"

#: ../../standalone/draksound_.c:46
#, fuzzy
msgid "No Sound Card detected!"
msgstr "Nie gekonnekteer nieKabelkonneksie"

#: ../../standalone/draksound_.c:47
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/draksound_.c:54
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
"program.  Just type \"sndconfig\" in a console."
msgstr ""

#: ../../standalone/draksplash_.c:21
msgid ""
"package 'ImageMagick' is required for correct working.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""

#: ../../standalone/draksplash_.c:67
#, fuzzy
msgid "first step creation"
msgstr "herlaaiskyfskepping"

#: ../../standalone/draksplash_.c:70
#, fuzzy
msgid "final resolution"
msgstr "Resolusie"

#: ../../standalone/draksplash_.c:71 ../../standalone/draksplash_.c:163
#, fuzzy
msgid "choose image file"
msgstr "Kies 'n l�er"

#: ../../standalone/draksplash_.c:72
#, fuzzy
msgid "Theme name"
msgstr "Drukkernaam:"

#: ../../standalone/draksplash_.c:77
msgid "Browse"
msgstr ""

#: ../../standalone/draksplash_.c:87 ../../standalone/draksplash_.c:153
#, fuzzy
msgid "Configure bootsplash picture"
msgstr "Konfigureer dienste"

#: ../../standalone/draksplash_.c:90
msgid ""
"x coordinate of text box\n"
"in number of character"
msgstr ""

#: ../../standalone/draksplash_.c:91
msgid ""
"y coordinate of text box\n"
"in number of character"
msgstr ""

#: ../../standalone/draksplash_.c:92
msgid "text width"
msgstr ""

#: ../../standalone/draksplash_.c:93
msgid "text box height"
msgstr ""

#: ../../standalone/draksplash_.c:94
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash_.c:95
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""

#: ../../standalone/draksplash_.c:96
msgid "the width of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:97
msgid "the heigth of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:98
msgid "the color of the progress bar"
msgstr ""

#: ../../standalone/draksplash_.c:113
#, fuzzy
msgid "Preview"
msgstr "toestel"

#: ../../standalone/draksplash_.c:115
#, fuzzy
msgid "Save theme"
msgstr "Installeer stelsel"

#: ../../standalone/draksplash_.c:116
#, fuzzy
msgid "Choose color"
msgstr "Kies 'n monitor"

#: ../../standalone/draksplash_.c:119
msgid "Display logo on Console"
msgstr ""

#: ../../standalone/draksplash_.c:120
msgid "Make kernel message quiet by default"
msgstr ""

#: ../../standalone/draksplash_.c:156 ../../standalone/draksplash_.c:321
#, c-format
msgid "This theme haven't yet any bootsplash in %s !"
msgstr ""

#: ../../standalone/draksplash_.c:205
msgid "saving Bootsplash theme..."
msgstr ""

#: ../../standalone/draksplash_.c:428
#, fuzzy
msgid "ProgressBar color selection"
msgstr "Drukkermodelkeuse"

#: ../../standalone/draksplash_.c:449
#, fuzzy
msgid "You must choose an image file first!"
msgstr "Tik  drukkertoestel URI in"

#: ../../standalone/draksplash_.c:458
#, fuzzy
msgid "Generating preview ..."
msgstr "Toestel word afgetas..."

#. -PO  First %s is theme name, second %s (in parenthesis) is resolution
#: ../../standalone/draksplash_.c:506
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr ""

#: ../../standalone/drakxtv_.c:46
msgid ""
"XawTV isn't installed!\n"
"\n"
"\n"
"If you do have a TV card but DrakX has neither detected it (no bttv nor "
"saa7134\n"
"module in \"/etc/modules\") nor installed xawtv, please send the\n"
"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
"with subject \"undetected TV card\".\n"
"\n"
"\n"
"You can install it by typing \"urpmi xawtv\" as root, in a console."
msgstr ""

#: ../../standalone/drakxtv_.c:63
#, fuzzy
msgid "Canada (cable)"
msgstr "Kanadees (Quebec)"

#: ../../standalone/drakxtv_.c:63
msgid "USA (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:63
msgid "USA (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:63
msgid "USA (cable-hrc)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "China (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "Japan (broadcast)"
msgstr ""

#: ../../standalone/drakxtv_.c:64
msgid "Japan (cable)"
msgstr ""

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "East Europe"
msgstr "Europa"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "France [SECAM]"
msgstr "Frankryk"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "Ireland"
msgstr "Yslandies"

#: ../../standalone/drakxtv_.c:65
#, fuzzy
msgid "West Europe"
msgstr "Europa"

#: ../../standalone/drakxtv_.c:66
#, fuzzy
msgid "Australia"
msgstr "seriaal"

#: ../../standalone/drakxtv_.c:66
msgid "Newzealand"
msgstr ""

#: ../../standalone/drakxtv_.c:67
msgid "South Africa"
msgstr ""

#: ../../standalone/drakxtv_.c:68
msgid "Argentina"
msgstr ""

#: ../../standalone/drakxtv_.c:69
msgid "Australian Optus cable TV"
msgstr ""

#: ../../standalone/drakxtv_.c:102
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: ../../standalone/drakxtv_.c:104
msgid "TV norm:"
msgstr ""

#: ../../standalone/drakxtv_.c:105
msgid "Area:"
msgstr ""

#: ../../standalone/drakxtv_.c:109
msgid "Scanning for TV channels in progress ..."
msgstr ""

#: ../../standalone/drakxtv_.c:116
msgid "Scanning for TV channels"
msgstr ""

#: ../../standalone/drakxtv_.c:120
#, fuzzy
msgid "There was an error while scanning for TV channels"
msgstr "Daar was 'n fout met die installasie van die pakkette:"

#: ../../standalone/drakxtv_.c:121
msgid "XawTV isn't installed!"
msgstr ""

#: ../../standalone/drakxtv_.c:124
msgid "Have a nice day!"
msgstr ""

#: ../../standalone/drakxtv_.c:125
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr ""

#: ../../standalone/drakxtv_.c:147
msgid "No TV Card detected!"
msgstr ""

#: ../../standalone/drakxtv_.c:148
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""

#: ../../standalone/harddrake2_.c:17
#, fuzzy
msgid "Alternative drivers"
msgstr "Alternatiewe toetsbladsy (A4)"

#: ../../standalone/harddrake2_.c:18
msgid "the list of alternative drivers for this sound card"
msgstr ""

#: ../../standalone/harddrake2_.c:20
msgid "Bus"
msgstr ""

#: ../../standalone/harddrake2_.c:21
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""

#: ../../standalone/harddrake2_.c:22
#, fuzzy
msgid "Channel"
msgstr "Kanselleer"

#: ../../standalone/harddrake2_.c:22
msgid "EIDE/SCSI channel"
msgstr ""

#: ../../standalone/harddrake2_.c:23
msgid "Bogomips"
msgstr ""

#: ../../standalone/harddrake2_.c:23
msgid ""
"The GNU/Linux kernel needs to do run a calculation loop at boot time\n"
"\t to initialize a timer counter.  Its result is stored as bogomips as a way "
"to \"benchmark\" the cpu."
msgstr ""

#: ../../standalone/harddrake2_.c:26
#, fuzzy
msgid "Bus identification"
msgstr "Magtiging"

#: ../../standalone/harddrake2_.c:27
msgid ""
"- PCI and USB devices: this list the vendor, device, subvendor and subdevice "
"PCI/USB ids"
msgstr ""

#: ../../standalone/harddrake2_.c:29
msgid "Location on the bus"
msgstr ""

#: ../../standalone/harddrake2_.c:30
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""

#: ../../standalone/harddrake2_.c:33
#, fuzzy
msgid "Cache size"
msgstr "blokgrootte"

#: ../../standalone/harddrake2_.c:33
msgid "Size of the (second level) cpu cache"
msgstr ""

#: ../../standalone/harddrake2_.c:34
msgid "Coma bug:"
msgstr ""

#: ../../standalone/harddrake2_.c:34
msgid "Does this cpu has Cyrix 6x86 Coma bug ?"
msgstr ""

#: ../../standalone/harddrake2_.c:35
msgid "Cpuid family"
msgstr ""

#: ../../standalone/harddrake2_.c:35
msgid "Family of the cpu (eg: 6 for i686 class)"
msgstr ""

#: ../../standalone/harddrake2_.c:36
#, fuzzy
msgid "Cpuid level"
msgstr "Sekuriteitsvlak word gestel."

#: ../../standalone/harddrake2_.c:36
msgid "Information level that can be obtained through the cpuid instruction"
msgstr ""

#: ../../standalone/harddrake2_.c:37
msgid "Frequency (MHz)"
msgstr ""

#: ../../standalone/harddrake2_.c:37
msgid ""
"The cpu frequency in Mhz (Mega herz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""

#: ../../standalone/harddrake2_.c:38
msgid "This field describes the device"
msgstr ""

#: ../../standalone/harddrake2_.c:39
#, fuzzy
msgid "Old device file"
msgstr "Selekteer lOer"

#: ../../standalone/harddrake2_.c:40
msgid "old static device name used in dev package"
msgstr ""

#: ../../standalone/harddrake2_.c:41
#, fuzzy
msgid "New devfs device"
msgstr "Netwerkportaaltoestel"

#: ../../standalone/harddrake2_.c:42
msgid "new dinamic device name generated by incore kernel devfs"
msgstr ""

#: ../../standalone/harddrake2_.c:43
#, fuzzy
msgid "Module"
msgstr "Muis"

#: ../../standalone/harddrake2_.c:43
msgid "the module of the GNU/Linux kernel that handle that device"
msgstr ""

#: ../../standalone/harddrake2_.c:44
msgid "CPU flags reported by the kernel"
msgstr ""

#: ../../standalone/harddrake2_.c:44
msgid "Flags"
msgstr ""

#: ../../standalone/harddrake2_.c:45
msgid "Fdiv bug"
msgstr ""

#: ../../standalone/harddrake2_.c:46
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the attended precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""

#: ../../standalone/harddrake2_.c:49
msgid "Is FPU present"
msgstr ""

#: ../../standalone/harddrake2_.c:49
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: ../../standalone/harddrake2_.c:50
msgid "Does FPU have an irq vector"
msgstr ""

#: ../../standalone/harddrake2_.c:50
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: ../../standalone/harddrake2_.c:51
msgid "Early pentium were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: ../../standalone/harddrake2_.c:51
msgid "F00f bug"
msgstr ""

#: ../../standalone/harddrake2_.c:52
msgid "Halt bug"
msgstr ""

#: ../../standalone/harddrake2_.c:53
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""

#: ../../standalone/harddrake2_.c:55
#, fuzzy
msgid "Floppy format"
msgstr "Formatteer"

#: ../../standalone/harddrake2_.c:55
msgid "Format of floppies the drive accept"
msgstr ""

#: ../../standalone/harddrake2_.c:56
#, fuzzy
msgid "Level"
msgstr "vlak"

#: ../../standalone/harddrake2_.c:56
msgid "Sub generation of the cpu"
msgstr ""

#: ../../standalone/harddrake2_.c:57
msgid "Media class"
msgstr ""

#: ../../standalone/harddrake2_.c:57
msgid "class of hardware device"
msgstr ""

#: ../../standalone/harddrake2_.c:58 ../../standalone/harddrake2_.c:59
#, fuzzy
msgid "Model"
msgstr "Muis"

#: ../../standalone/harddrake2_.c:58
#, fuzzy
msgid "hard disk model"
msgstr "Kaartgeheue (DMA)"

#: ../../standalone/harddrake2_.c:59
msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""

#: ../../standalone/harddrake2_.c:60
#, fuzzy
msgid "Model name"
msgstr "Modulenaam"

#: ../../standalone/harddrake2_.c:60
msgid "Official vendor name of the cpu"
msgstr ""

#: ../../standalone/harddrake2_.c:61
#, fuzzy
msgid "Number of buttons"
msgstr "2 knoppies"

#: ../../standalone/harddrake2_.c:62
#, fuzzy
msgid "Name"
msgstr "Naam: "

#
#: ../../standalone/harddrake2_.c:63
#, fuzzy
msgid "network printer port"
msgstr "Netwerkdrukker (sok)"

#: ../../standalone/harddrake2_.c:64
msgid "Processor ID"
msgstr ""

#: ../../standalone/harddrake2_.c:64
msgid "the number of the processor"
msgstr ""

#: ../../standalone/harddrake2_.c:65
#, fuzzy
msgid "Model stepping"
msgstr "Formatering"

#: ../../standalone/harddrake2_.c:65
msgid "Stepping of the cpu (sub model (generation) number)"
msgstr ""

#: ../../standalone/harddrake2_.c:66
#, fuzzy
msgid "The type of bus on which the mouse is connected"
msgstr "Aan watter seriaalpoort is u muis gekoppel?"

#: ../../standalone/harddrake2_.c:67
msgid "the vendor name of the device"
msgstr ""

#: ../../standalone/harddrake2_.c:68
msgid "the vendor name of the processor"
msgstr ""

#: ../../standalone/harddrake2_.c:82
#, fuzzy
msgid "/_Quit"
msgstr "Verlaat"

#: ../../standalone/harddrake2_.c:83
#, fuzzy
msgid "/Autodetect _printers"
msgstr "Gebruik outobespeuring"

#: ../../standalone/harddrake2_.c:83 ../../standalone/harddrake2_.c:85
#: ../../standalone/logdrake_.c:81
msgid "/_Options"
msgstr "/_Opsies"

#: ../../standalone/harddrake2_.c:85
#, fuzzy
msgid "/Autodetect _modems"
msgstr "Gebruik outobespeuring"

#: ../../standalone/harddrake2_.c:87 ../../standalone/harddrake2_.c:89
#: ../../standalone/harddrake2_.c:100 ../../standalone/harddrake2_.c:102
#: ../../standalone/logdrake_.c:83
msgid "/_Help"
msgstr "/_Help"

#: ../../standalone/harddrake2_.c:89
#, fuzzy
msgid "/_Help..."
msgstr "/_Help"

#: ../../standalone/harddrake2_.c:92
msgid "Harddrake help"
msgstr ""

#: ../../standalone/harddrake2_.c:93
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""

#: ../../standalone/harddrake2_.c:96
msgid ""
"Once you've selected a device, you'll be able to see explanations on fields "
"displayed on the right frame (\"Information\")"
msgstr ""

#: ../../standalone/harddrake2_.c:96
#, fuzzy
msgid "Select a device !"
msgstr "Selekteer 'n videokaart"

#: ../../standalone/harddrake2_.c:100
msgid "/_Report Bug"
msgstr ""

#: ../../standalone/harddrake2_.c:102
#, fuzzy
msgid "/_About..."
msgstr "/Help/_Aangaande..."

#: ../../standalone/harddrake2_.c:104
msgid "About Harddrake"
msgstr ""

#: ../../standalone/harddrake2_.c:105
msgid ""
"This is HardDrake, a Mandrake hardware configuration tool.\n"
"Version:"
msgstr ""

#: ../../standalone/harddrake2_.c:106
#, fuzzy
msgid "Author:"
msgstr "Aftas"

#: ../../standalone/harddrake2_.c:113
#, fuzzy
msgid "Detection in progress"
msgstr "Op poort %s bespeur"

#: ../../standalone/harddrake2_.c:119
#, fuzzy
msgid "Harddrake2 version "
msgstr "Hardeskyfdeteksie."

#: ../../standalone/harddrake2_.c:126
#, fuzzy
msgid "Detected hardware"
msgstr "Sien hardeware inligting"

#: ../../standalone/harddrake2_.c:129
#, fuzzy
msgid "Information"
msgstr "Vertoon inligting"

#: ../../standalone/harddrake2_.c:131
#, fuzzy
msgid "Configure module"
msgstr "Stel muistoestel op"

#: ../../standalone/harddrake2_.c:137
msgid "Run config tool"
msgstr ""

#: ../../standalone/harddrake2_.c:143
#, fuzzy, c-format
msgid "Running \"%s\" ..."
msgstr "Drukkerdata word gelees..."

#: ../../standalone/harddrake2_.c:159
msgid ""
"Click on a device in the left tree in order to get its information displayed "
"here."
msgstr ""

#: ../../standalone/harddrake2_.c:231
msgid "primary"
msgstr ""

#: ../../standalone/harddrake2_.c:231
#, fuzzy
msgid "secondary"
msgstr "%d sekondes"

#: ../../standalone/harddrake2_.c:260
#, fuzzy
msgid "/Autodetect modems"
msgstr "Gebruik outobespeuring"

#: ../../standalone/harddrake2_.c:260
#, fuzzy
msgid "/Autodetect printers"
msgstr "Gebruik outobespeuring"

#: ../../standalone/harddrake2_.c:261
#, fuzzy
msgid "/Options"
msgstr "/_Opsies"

#: ../../standalone/keyboarddrake_.c:26
msgid "Please, choose your keyboard layout."
msgstr "Wat is u sleutelborduitleg?"

#: ../../standalone/keyboarddrake_.c:35
msgid "Do you want the BackSpace to return Delete in console?"
msgstr ""
"Wil u h� dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
"terugstuur)?"

#: ../../standalone/livedrake_.c:18
msgid "Change Cd-Rom"
msgstr "Verander CDROM"

#: ../../standalone/livedrake_.c:19
msgid ""
"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
"If you don't have it, press Cancel to avoid live upgrade."
msgstr ""
"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."

#: ../../standalone/livedrake_.c:29
msgid "Unable to start live upgrade !!!\n"
msgstr "Kon nie die intydse opgradering begin nie !!!\n"

#: ../../standalone/localedrake_.c:34
msgid "The change is done, but to be effective you must logout"
msgstr ""

#: ../../standalone/logdrake_.c:56 ../../ugtk.pm_.c:284 ../../ugtk2.pm_.c:350
msgid "logdrake"
msgstr ""

#: ../../standalone/logdrake_.c:68
msgid "Show only for the selected day"
msgstr ""

#: ../../standalone/logdrake_.c:75
msgid "/File/_New"
msgstr "/L�er/_Nuut"

#: ../../standalone/logdrake_.c:75
msgid "<control>N"
msgstr "<control>N"

#: ../../standalone/logdrake_.c:76
msgid "/File/_Open"
msgstr "/L�er/_Oopmaak"

#: ../../standalone/logdrake_.c:76
msgid "<control>O"
msgstr "<control>O"

#: ../../standalone/logdrake_.c:77
msgid "/File/_Save"
msgstr "/L�er/_Stoor"

#: ../../standalone/logdrake_.c:77
msgid "<control>S"
msgstr "<control>S"

#: ../../standalone/logdrake_.c:78
msgid "/File/Save _As"
msgstr "/L�er/Stoor _as"

#: ../../standalone/logdrake_.c:79
msgid "/File/-"
msgstr "/L�er/-"

#: ../../standalone/logdrake_.c:82
msgid "/Options/Test"
msgstr "/Opsies/Toets"

#: ../../standalone/logdrake_.c:84
msgid "/Help/_About..."
msgstr "/Help/_Aangaande..."

#: ../../standalone/logdrake_.c:145
#, fuzzy
msgid "User"
msgstr "Gebruikerskode"

#: ../../standalone/logdrake_.c:146
#, fuzzy
msgid "Messages"
msgstr "Beginboodskap"

#: ../../standalone/logdrake_.c:147
msgid "Syslog"
msgstr ""

#: ../../standalone/logdrake_.c:148
msgid "Mandrake Tools Explanations"
msgstr ""

#: ../../standalone/logdrake_.c:151
msgid "search"
msgstr ""

#: ../../standalone/logdrake_.c:161
msgid "A tool to monitor your logs"
msgstr ""

#: ../../standalone/logdrake_.c:162 ../../standalone/net_monitor_.c:91
msgid "Settings"
msgstr ""

#: ../../standalone/logdrake_.c:167
msgid "matching"
msgstr ""

#: ../../standalone/logdrake_.c:168
msgid "but not matching"
msgstr ""

#: ../../standalone/logdrake_.c:172
msgid "Choose file"
msgstr ""

#: ../../standalone/logdrake_.c:181
msgid "Calendar"
msgstr ""

#: ../../standalone/logdrake_.c:191
msgid "Content of the file"
msgstr ""

#: ../../standalone/logdrake_.c:195 ../../standalone/logdrake_.c:375
msgid "Mail alert"
msgstr ""

#: ../../standalone/logdrake_.c:245
#, c-format
msgid "please wait, parsing file: %s"
msgstr ""

#: ../../standalone/logdrake_.c:392
#, fuzzy
msgid "Mail alert configuration"
msgstr "Konfigurasie"

#: ../../standalone/logdrake_.c:393
#, fuzzy
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Welkom by die proksiekonfigurasienutsprogram.\n"
"\n"
"Hier kan u die HTTP en FTP-instaanbedieners\n"
"opstel met of sonder aantekenkodes en wagwoorde\n"

#: ../../standalone/logdrake_.c:400
msgid "Apache World Wide Web Server"
msgstr ""

#: ../../standalone/logdrake_.c:401
#, fuzzy
msgid "Domain Name Resolver"
msgstr "Domeinnaam"

#: ../../standalone/logdrake_.c:402
#, fuzzy
msgid "Ftp Server"
msgstr "NIS-bediener"

#: ../../standalone/logdrake_.c:403
#, fuzzy
msgid "Postfix Mail Server"
msgstr "Postfix e-posbediener, Inn netnuusbediener"

#: ../../standalone/logdrake_.c:404
#, fuzzy
msgid "Samba Server"
msgstr "NIS-bediener"

#: ../../standalone/logdrake_.c:405
#, fuzzy
msgid "SSH Server"
msgstr "NIS-bediener"

#: ../../standalone/logdrake_.c:406
#, fuzzy
msgid "Webmin Service"
msgstr "Dienste"

#: ../../standalone/logdrake_.c:407
#, fuzzy
msgid "Xinetd Service"
msgstr "Drukkerbediener"

#: ../../standalone/logdrake_.c:414
#, fuzzy
msgid "service setting"
msgstr "interessant"

#: ../../standalone/logdrake_.c:415
msgid ""
"You will receive an alert if one of the selected services is no more running"
msgstr ""

#: ../../standalone/logdrake_.c:428
#, fuzzy
msgid "load setting"
msgstr "Formatering"

#: ../../standalone/logdrake_.c:429
msgid "You will receive an alert if the load is higher than this value"
msgstr ""

#: ../../standalone/logdrake_.c:444
#, fuzzy
msgid "alert configuration"
msgstr "Kleurkonfigurasie"

#: ../../standalone/logdrake_.c:445
#, fuzzy
msgid "Please enter your email address below "
msgstr "Probeer asb. weer"

#: ../../standalone/logdrake_.c:486
msgid "Save as.."
msgstr ""

#: ../../standalone/mousedrake_.c:37
msgid "Please, choose the type of your mouse."
msgstr "Wat is u muistoestel?"

#: ../../standalone/mousedrake_.c:50
msgid "Emulate third button?"
msgstr "Emuleer derde knop?"

#: ../../standalone/net_monitor_.c:53 ../../standalone/net_monitor_.c:87
#, fuzzy
msgid "Network Monitoring"
msgstr "Netwerkkonfigurasie"

#: ../../standalone/net_monitor_.c:96
#, fuzzy
msgid "Profile "
msgstr "Profiel:"

#: ../../standalone/net_monitor_.c:99
msgid "Statistics"
msgstr ""

#: ../../standalone/net_monitor_.c:103
#, fuzzy
msgid "Sending Speed:"
msgstr "Stoor in l�er"

#: ../../standalone/net_monitor_.c:104
msgid "Receiving Speed:"
msgstr ""

#: ../../standalone/net_monitor_.c:106
#, fuzzy
msgid "Connection Time: "
msgstr "Konneksietipe:"

#: ../../standalone/net_monitor_.c:113
msgid "Logs"
msgstr ""

#: ../../standalone/net_monitor_.c:147
#, fuzzy
msgid "Wait please, testing your connection..."
msgstr "Konneksie word getoets..."

#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191
#, fuzzy
msgid "Connecting to Internet "
msgstr "Konnekteer aan die internet"

#: ../../standalone/net_monitor_.c:178 ../../standalone/net_monitor_.c:191
#, fuzzy
msgid "Disconnecting from Internet "
msgstr "Konnekteer aan die internet"

#: ../../standalone/net_monitor_.c:222
msgid "Disconnection from Internet failed."
msgstr ""

#: ../../standalone/net_monitor_.c:223
msgid "Disconnection from Internet complete."
msgstr ""

#: ../../standalone/net_monitor_.c:225
#, fuzzy
msgid "Connection complete."
msgstr "Konneksiespoed"

#: ../../standalone/net_monitor_.c:226
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrake Control Center."
msgstr ""

#: ../../standalone/net_monitor_.c:330
#, fuzzy
msgid "Color configuration"
msgstr "Kleurkonfigurasie"

#: ../../standalone/net_monitor_.c:383 ../../standalone/net_monitor_.c:403
msgid "sent: "
msgstr ""

#: ../../standalone/net_monitor_.c:390 ../../standalone/net_monitor_.c:407
msgid "received: "
msgstr ""

#: ../../standalone/net_monitor_.c:397
msgid "average"
msgstr ""

#: ../../standalone/net_monitor_.c:400
#, fuzzy
msgid "Local measure"
msgstr "Plaaslike l�ers"

#: ../../standalone/net_monitor_.c:432
msgid "transmitted"
msgstr ""

#: ../../standalone/net_monitor_.c:433
msgid "received"
msgstr ""

#: ../../standalone/net_monitor_.c:453
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""

#: ../../standalone/net_monitor_.c:459
#, fuzzy, c-format
msgid "Connect %s"
msgstr "Konnekteer"

#: ../../standalone/net_monitor_.c:459
#, fuzzy, c-format
msgid "Disconnect %s"
msgstr "Diskonnekteer"

#: ../../standalone/printerdrake_.c:47
#, fuzzy
msgid "Reading printer data ..."
msgstr "Drukkerdata word gelees..."

#: ../../standalone/scannerdrake_.c:39
#, fuzzy
msgid "Detecting devices ..."
msgstr "Toestel word afgetas..."

#: ../../standalone/scannerdrake_.c:39
msgid "Test ports"
msgstr "Toets poorte"

#: ../../standalone/scannerdrake_.c:51 ../../standalone/scannerdrake_.c:66
#: ../../standalone/scannerdrake_.c:79
#, c-format
msgid "The %s is not supported by this version of Mandrake Linux."
msgstr ""

#: ../../standalone/scannerdrake_.c:54
#, fuzzy, c-format
msgid "%s found on %s, configure it?"
msgstr "Wil u 'n drukwerk nou konfigureer?"

#: ../../standalone/scannerdrake_.c:57
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr ""

#: ../../standalone/scannerdrake_.c:63
#, fuzzy
msgid "Select a scanner"
msgstr "Selekteer 'n videokaart"

#: ../../standalone/scannerdrake_.c:91
#, c-format
msgid "This %s scanner is unsupported"
msgstr ""

#: ../../standalone/scannerdrake_.c:105
#, c-format
msgid ""
"Scannerdrake was not able to detect your %s scanner.\n"
"Please select the device where your scanner is plugged"
msgstr ""

#: ../../standalone/scannerdrake_.c:107
#, fuzzy
msgid "choose device"
msgstr "Herlaaitoestel"

#: ../../standalone/scannerdrake_.c:113
#, c-format
msgid ""
"This %s scanner must be configured by printerdrake.\n"
"You can launch printerdrake from the Mandrake Control Center in Hardware "
"section."
msgstr ""

#: ../../standalone/scannerdrake_.c:118
#, c-format
msgid ""
"Your %s scanner has been configured.\n"
"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
"applications menu."
msgstr ""

#: ../../standalone/service_harddrake_.c:44
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""

#: ../../standalone/service_harddrake_.c:48
msgid "Some devices were added:\n"
msgstr ""

#: ../../standalone/service_harddrake_.c:64
#, fuzzy
msgid "Hardware probing in progress"
msgstr "Op poort %s bespeur"

#: ../../steps.pm_.c:14
msgid "Choose your language"
msgstr "Kies u taal"

#: ../../steps.pm_.c:15
msgid "Select installation class"
msgstr "Kies installasieklas"

#: ../../steps.pm_.c:16
msgid "Hard drive detection"
msgstr "Hardeskyfdeteksie."

#: ../../steps.pm_.c:17
msgid "Configure mouse"
msgstr "Stel muistoestel op"

#: ../../steps.pm_.c:18
msgid "Choose your keyboard"
msgstr "Kies u sleutelbord"

#: ../../steps.pm_.c:19
msgid "Security"
msgstr "Sekuriteit"

#: ../../steps.pm_.c:20
msgid "Setup filesystems"
msgstr "Stel l�erstelsels op"

#: ../../steps.pm_.c:21
msgid "Format partitions"
msgstr "Formateer partisies"

#: ../../steps.pm_.c:22
msgid "Choose packages to install"
msgstr "Kies pakkette om te installeer"

#: ../../steps.pm_.c:23
msgid "Install system"
msgstr "Installeer stelsel"

#: ../../steps.pm_.c:25
msgid "Add a user"
msgstr "Voeg 'n gebruiker by"

#: ../../steps.pm_.c:26
msgid "Configure networking"
msgstr "Stel netwerk op"

#: ../../steps.pm_.c:28
msgid "Configure services"
msgstr "Konfigureer dienste"

#: ../../steps.pm_.c:29
msgid "Install bootloader"
msgstr "Installeer herlaaistelsel"

#: ../../steps.pm_.c:31
msgid "Create a bootdisk"
msgstr "Maar 'n herlaaiskyf"

#: ../../steps.pm_.c:33
msgid "Configure X"
msgstr "Stel X op"

#: ../../steps.pm_.c:34
#, fuzzy
msgid "Install system updates"
msgstr "Installeer stelsel"

#: ../../steps.pm_.c:35
msgid "Exit install"
msgstr "Verlaay installasie"

#: ../../ugtk.pm_.c:636
msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"

#: ../../ugtk2.pm_.c:711
msgid "utopia 25"
msgstr ""

#: ../../share/compssUsers:999
msgid "Web/FTP"
msgstr "Web/FTP"

#
#: ../../share/compssUsers:999
msgid "Network Computer (client)"
msgstr "Netwerkrekenaar (kli�nt)"

#: ../../share/compssUsers:999
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"

#: ../../share/compssUsers:999
msgid "Office"
msgstr "Kantoor"

#: ../../share/compssUsers:999
msgid "Gnome Workstation"
msgstr "Gnome werkstasie"

#: ../../share/compssUsers:999
msgid "Tools for your Palm Pilot or your Visor"
msgstr "Nutsprogramme vir PalmPilot en/of Visor"

#: ../../share/compssUsers:999
msgid "Workstation"
msgstr "Werkstasie"

#: ../../share/compssUsers:999
msgid "Firewall/Router"
msgstr "Vuurmuur/Netwerkroteerder"

#: ../../share/compssUsers:999
msgid "Domain Name and Network Information Server"
msgstr "Domeinnaam en Netwerk Informasie Bediener (DNS/NIS)"

#: ../../share/compssUsers:999
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
"gnumeric), PDF-sigprogramme, ens."

#: ../../share/compssUsers:999
msgid "Audio-related tools: mp3 or midi players, mixers, etc"
msgstr "Klankprogramme: MP3- of MIDI-spelers, mengers, ens."

#: ../../share/compssUsers:999
msgid "Linux Standard Base. Third party applications support"
msgstr ""

#: ../../share/compssUsers:999
msgid "Books and Howto's on Linux and Free Software"
msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"

#: ../../share/compssUsers:999
msgid "KDE Workstation"
msgstr "KDE werkstasie"

#: ../../share/compssUsers:999
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."

#: ../../share/compssUsers:999
msgid "Multimedia - Video"
msgstr "Multimedia - Video"

#: ../../share/compssUsers:999
msgid "Set of tools for mail, news, web, file transfer, and chat"
msgstr "Hulpprogramme vir e-pos, netnuus, web, FTP en netpraat"

#: ../../share/compssUsers:999
msgid "Database"
msgstr "Datbasis"

#: ../../share/compssUsers:999
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL of MySQL databasisbediener"

#: ../../share/compssUsers:999
msgid "Tools to ease the configuration of your computer"
msgstr "Hulpprogramme vir u rekenaarkonfigurasie te vergemaklik"

#: ../../share/compssUsers:999
msgid "Multimedia - Sound"
msgstr "Multimedia - Klank"

#: ../../share/compssUsers:999
msgid "Documentation"
msgstr "dokumentasie"

#: ../../share/compssUsers:999
msgid "Console Tools"
msgstr "Konsole hulpprogramme"

#: ../../share/compssUsers:999
msgid "Postfix mail server, Inn news server"
msgstr "Postfix e-posbediener, Inn netnuusbediener"

#: ../../share/compssUsers:999
msgid "Internet station"
msgstr "Internetstasie"

#: ../../share/compssUsers:999
msgid "Multimedia station"
msgstr "Multimediastasie"

#: ../../share/compssUsers:999
msgid "Configuration"
msgstr "Konfigurasie"

#: ../../share/compssUsers:999
msgid "More Graphical Desktops (Gnome, IceWM)"
msgstr "Addisionele grafiese werkskerms (Gnome, IceWM)"

#: ../../share/compssUsers:999
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
"versameling bygaande hulpprogramme"

#: ../../share/compssUsers:999
msgid "Graphical Environment"
msgstr "Grafiese omgewing"

#: ../../share/compssUsers:999
msgid "Development"
msgstr "Ontwikkeling"

#: ../../share/compssUsers:999
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: ../../share/compssUsers:999
msgid "Tools to create and burn CD's"
msgstr "Hulpprogramme vir die skep en brand van CDs"

#: ../../share/compssUsers:999
msgid "Office Workstation"
msgstr "Kantoorwerkstasie"

#: ../../share/compssUsers:999
msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ens."

#: ../../share/compssUsers:999
msgid "Graphics programs such as The Gimp"
msgstr "Grafiese programme soos Die GIMP"

#: ../../share/compssUsers:999
msgid "DNS/NIS "
msgstr "DNS/NIS "

#: ../../share/compssUsers:999
msgid "C and C++ development libraries, programs and include files"
msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitl�ers"

#
#: ../../share/compssUsers:999
msgid "Network Computer server"
msgstr "Netwerkrekenaarbediener"

#: ../../share/compssUsers:999
msgid "Mail/Groupware/News"
msgstr "E-pos/Groepware/Netnuus"

#: ../../share/compssUsers:999
msgid "Game station"
msgstr "Speletjiesrekenaar"

#: ../../share/compssUsers:999
msgid "Video players and editors"
msgstr "Videospelers en -redigeerders"

#: ../../share/compssUsers:999
msgid "Multimedia - Graphics"
msgstr "Multimedia - Grafika"

#: ../../share/compssUsers:999
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Vermaak: Arkade, Bordspel, Strategie ens."

#: ../../share/compssUsers:999
msgid ""
"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
"browse the Web"
msgstr ""
"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
"en om ook die web deur te blaai."

#: ../../share/compssUsers:999
msgid "Personal Finance"
msgstr "Persoonlike finansies"

#: ../../share/compssUsers:999
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"'n Grafiese omgewing met  gebruikersvriendelike stel applikasies en "
"werkskermhulpprogramme"

#: ../../share/compssUsers:999
msgid "Clients for different protocols including ssh"
msgstr "Kli�ntprogramme vir 'n verkeidenheid protokolle insluitende SSH"

#: ../../share/compssUsers:999
msgid "LSB"
msgstr ""

#: ../../share/compssUsers:999
msgid "Internet gateway"
msgstr "Internetpoort"

#: ../../share/compssUsers:999
msgid "Sound and video playing/editing programs"
msgstr "Klank- en videospelers/redigeerders"

#: ../../share/compssUsers:999
msgid "Other Graphical Desktops"
msgstr "Ander grafiese werkskerms"

#: ../../share/compssUsers:999
msgid "Editors, shells, file tools, terminals"
msgstr ""
"Redigeerders. teksverwerkers, instruksiedoppe, l�ernutsprogramme, "
"terminaalprogramme"

#: ../../share/compssUsers:999
msgid "Programs to manage your finance, such as gnucash"
msgstr "Programme om u finansies te bestuur, soos GNUcash"

#: ../../share/compssUsers:999
msgid "Personal Information Management"
msgstr "Persoonlike Inligtingbestuur."

#: ../../share/compssUsers:999
msgid "Multimedia - CD Burning"
msgstr "Multimedia - CD Sny"

#: ../../share/compssUsers:999
msgid "Scientific Workstation"
msgstr "Wetenskaplike werkstasie"

#~ msgid "can not open /etc/inittab for reading: %s"
#~ msgstr "kan nie /etc/inittab oopmaak vir lees nie: %s"

#, fuzzy
#~ msgid "cpu number "
#~ msgstr "Telefoonnommer"

#~ msgid ""
#~ "You now have the opportunity to download encryption software.\n"
#~ "\n"
#~ "WARNING:\n"
#~ "\n"
#~ "Due to different general requirements applicable to these software and "
#~ "imposed\n"
#~ "by various jurisdictions, customer and/or end user of theses software "
#~ "should\n"
#~ "ensure that the laws of his/their jurisdiction allow him/them to "
#~ "download, stock\n"
#~ "and/or use these software.\n"
#~ "\n"
#~ "In addition customer and/or end user shall particularly be aware to not "
#~ "infringe\n"
#~ "the laws of his/their jurisdiction. Should customer and/or end user not\n"
#~ "respect the provision of these applicable laws, he/they will incure "
#~ "serious\n"
#~ "sanctions.\n"
#~ "\n"
#~ "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
#~ "liable\n"
#~ "for special, indirect or incidental damages whatsoever (including, but "
#~ "not\n"
#~ "limited to loss of profits, business interruption, loss of commercial "
#~ "data and\n"
#~ "other pecuniary losses, and eventual liabilities and indemnification to "
#~ "be paid\n"
#~ "pursuant to a court decision) arising out of use, possession, or the "
#~ "sole\n"
#~ "downloading of these software, to which customer and/or end user could\n"
#~ "eventually have access after having sign up the present agreement.\n"
#~ "\n"
#~ "\n"
#~ "For any queries relating to these agreement, please contact \n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"
#~ msgstr ""
#~ "U het nou die kans om enkripsieprogrammatuur af te laai.\n"
#~ "\n"
#~ "WAARSKUWING:\n"
#~ "\n"
#~ "A.g.v. die verskillende algemene vereistes wat van toepassing gemaak word "
#~ "deur\n"
#~ "wetgewing,  moet die eindgebruiker van hierdie sagteware seker wees dat "
#~ "die\n"
#~ "wette in sy/haar land dit wel toelaat dat om hierdie agteware af te laai, "
#~ "aan te hou\n"
#~ "en te gebruik.\n"
#~ "Daarbenewens moet die gebruiker seker maak dat plaaslike wetgewing nie "
#~ "oortree\n"
#~ "word nie. Misbruik kan lei tot ernstige sanksies.\n"
#~ "\n"
#~ "In geen geval kan MandrakeSoft nog sy vervaardigers en verskaffers "
#~ "verantwoordelik\n"
#~ "gehou word vir spesiale, indirekte or toevallige skade berokken "
#~ "(insluitend, maar nie\n"
#~ "beperk tot, winsverlies, besigheidsonderbreking, dataverlies en enige "
#~ "voorspruitende laste\n"
#~ "soos moontlik bepaal deur die wetgewende hof) wat vooruitspruit uit die "
#~ "gebruik, besit\n"
#~ "of aflaai van hierdie programmatuur nie, na tekening wat hierdie "
#~ "ooreenkoms nie.\n"
#~ "\n"
#~ "\n"
#~ "Vir navrae vewant aan hierdie ooreenkoms, kontak asb.\n"
#~ "Mandrakesoft, Inc.\n"
#~ "2400 N. Lincoln Avenue Suite 243\n"
#~ "Altadena California 91001\n"
#~ "USA"

#~ msgid "Proxy configuration"
#~ msgstr "Instaanbedienerkonfigurasie"

#~ msgid ""
#~ "Welcome to the proxy configuration utility.\n"
#~ "\n"
#~ "Here, you'll be able to set up your http and ftp proxies\n"
#~ "with or without login and password\n"
#~ msgstr ""
#~ "Welkom by die proksiekonfigurasienutsprogram.\n"
#~ "\n"
#~ "Hier kan u die HTTP en FTP-instaanbedieners\n"
#~ "opstel met of sonder aantekenkodes en wagwoorde\n"

#~ msgid "URL"
#~ msgstr "URL"

#~ msgid "port"
#~ msgstr "Poort"

#~ msgid "Url should begin with 'http:'"
#~ msgstr "Instaanbediener moet begin met http://"

#~ msgid "The port part should be numeric"
#~ msgstr "Die poortgedeelte moet numeries wees"

#~ msgid ""
#~ "Please fill in the ftp proxy informations\n"
#~ "Leave it blank if you don't want an ftp proxy"
#~ msgstr ""
#~ "Vul asb. die FTP-instaanbediener inligting in\n"
#~ "Los dit oop indien u nie  FTP-instaanbediener verlang nie"

#~ msgid "login"
#~ msgstr "Gebruikerskode"

#~ msgid "password"
#~ msgstr "Herhaal wagwoord"

#~ msgid "re-type password"
#~ msgstr "Geen wagwoord"

#~ msgid "The passwords don't match. Try again!"
#~ msgstr "Die wagwoorde stem nie ooreen nie. Probeer weer!"

#~ msgid "Can't write file %s"
#~ msgstr "Kan nie l�er %s skryf nie"

#~ msgid "no help implemented yet.\n"
#~ msgstr "Gee hulp beskikbaar nie (nog nie).\n"

#, fuzzy
#~ msgid "Please click on a medium"
#~ msgstr "Kliek asb. op 'n partisie"

#~ msgid "Removing LPRng..."
#~ msgstr "LPRng word verwyder..."

#~ msgid "Removing LPD..."
#~ msgstr "LPD word verwyder..."

#~ msgid "usage: drakfloppy\n"
#~ msgstr "gebruik: drakfloppy\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage: harddrake [-h|--help] [--test]\n"
#~ msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"

#~ msgid "usage: keyboarddrake [--expert] [keyboard]\n"
#~ msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"

#~ msgid "detected on interface %s"
#~ msgstr "op koppelvlak %s bespeur"