# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2000-09-02 12:09+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../../Xconfigurator.pm_.c:123 ../../Xconfigurator.pm_.c:289 msgid "Generic" msgstr "" #: ../../Xconfigurator.pm_.c:179 msgid "Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:179 msgid "Select a graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:180 msgid "Choose a X server" msgstr "" #: ../../Xconfigurator.pm_.c:180 msgid "X server" msgstr "" #: ../../Xconfigurator.pm_.c:204 msgid "Do you want support for hardware 3D acceleration?" msgstr "" #: ../../Xconfigurator.pm_.c:212 msgid "" "Your card can have 3D acceleration but only with XFree 3.3.\n" "Do You want to use XFree 3.3 instead of XFree 4.0?" msgstr "" #: ../../Xconfigurator.pm_.c:236 msgid "Select the memory size of your graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:278 msgid "Choose options for server" msgstr "" #: ../../Xconfigurator.pm_.c:289 msgid "Choose a monitor" msgstr "" #: ../../Xconfigurator.pm_.c:289 msgid "Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:292 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../Xconfigurator.pm_.c:299 msgid "Horizontal refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:299 msgid "Vertical refresh rate" msgstr "" #: ../../Xconfigurator.pm_.c:338 msgid "Monitor not configured" msgstr "" #: ../../Xconfigurator.pm_.c:341 msgid "Graphic card not configured yet" msgstr "" #: ../../Xconfigurator.pm_.c:344 msgid "Resolutions not chosen yet" msgstr "" #: ../../Xconfigurator.pm_.c:357 msgid "Do you want to test the configuration?" msgstr "" #: ../../Xconfigurator.pm_.c:361 msgid "Warning: testing is dangerous on this graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:364 msgid "Test of the configuration" msgstr "" #: ../../Xconfigurator.pm_.c:403 msgid "" "\n" "try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:403 msgid "An error has occurred:" msgstr "" #: ../../Xconfigurator.pm_.c:426 #, c-format msgid "Leaving in %d seconds" msgstr "" #: ../../Xconfigurator.pm_.c:430 msgid "Is this the correct setting?" msgstr "" #: ../../Xconfigurator.pm_.c:438 msgid "An error has occurred, try to change some parameters" msgstr "" #: ../../Xconfigurator.pm_.c:446 ../../Xconfigurator.pm_.c:630 msgid "Automatic resolutions" msgstr "" #: ../../Xconfigurator.pm_.c:447 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" #: ../../Xconfigurator.pm_.c:506 ../../printerdrake.pm_.c:260 msgid "Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:541 msgid "Choose the resolution and the color depth" msgstr "" #: ../../Xconfigurator.pm_.c:543 #, c-format msgid "Graphic card: %s" msgstr "" #: ../../Xconfigurator.pm_.c:544 #, c-format msgid "XFree86 server: %s" msgstr "" #: ../../Xconfigurator.pm_.c:553 msgid "Show all" msgstr "" #: ../../Xconfigurator.pm_.c:577 msgid "Resolutions" msgstr "" #: ../../Xconfigurator.pm_.c:631 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" #: ../../Xconfigurator.pm_.c:636 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" #: ../../Xconfigurator.pm_.c:1008 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1009 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1010 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1011 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1012 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1013 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1014 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1015 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../../Xconfigurator.pm_.c:1016 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../../Xconfigurator.pm_.c:1031 msgid "Preparing X-Window configuration" msgstr "" #: ../../Xconfigurator.pm_.c:1045 msgid "Change Monitor" msgstr "" #: ../../Xconfigurator.pm_.c:1046 msgid "Change Graphic card" msgstr "" #: ../../Xconfigurator.pm_.c:1047 msgid "Change Server options" msgstr "" #: ../../Xconfigurator.pm_.c:1048 msgid "Change Resolution" msgstr "" #: ../../Xconfigurator.pm_.c:1049 msgid "Automatical resolutions search" msgstr "" #: ../../Xconfigurator.pm_.c:1053 msgid "Show information" msgstr "" #: ../../Xconfigurator.pm_.c:1054 msgid "Test again" msgstr "" #: ../../Xconfigurator.pm_.c:1055 ../../standalone/rpmdrake_.c:46 msgid "Quit" msgstr "" #: ../../Xconfigurator.pm_.c:1059 ../../standalone/drakboot_.c:40 msgid "What do you want to do?" msgstr "" #: ../../Xconfigurator.pm_.c:1066 msgid "Forget the changes?" msgstr "" #: ../../Xconfigurator.pm_.c:1084 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../../Xconfigurator.pm_.c:1100 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../Xconfigurator.pm_.c:1103 msgid "X at startup" msgstr "" #: ../../Xconfigurator.pm_.c:1104 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../../Xconfigurator.pm_.c:1117 msgid "Autologin" msgstr "" #: ../../Xconfigurator.pm_.c:1118 msgid "" "I can set up your computer to automatically log on one user.\n" "If you don't want to use this feature, click on the cancel button." msgstr "" #: ../../Xconfigurator.pm_.c:1120 msgid "Choose the default user:" msgstr "" #: ../../Xconfigurator.pm_.c:1121 msgid "Choose the window_manager to run:" msgstr "" #: ../../Xconfigurator_consts.pm_.c:5 msgid "256 colors (8 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:6 msgid "32 thousand colors (15 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:7 msgid "65 thousand colors (16 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:8 msgid "16 million colors (24 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:9 msgid "4 billion colors (32 bits)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:104 msgid "256 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:105 msgid "512 kB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:106 msgid "1 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:107 msgid "2 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:108 msgid "4 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:109 msgid "8 MB" msgstr "" #: ../../Xconfigurator_consts.pm_.c:110 msgid "16 MB or more" msgstr "" #: ../../Xconfigurator_consts.pm_.c:115 ../../Xconfigurator_consts.pm_.c:116 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:117 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:118 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../../Xconfigurator_consts.pm_.c:119 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:120 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:121 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:122 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:123 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:124 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:125 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:126 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../../Xconfigurator_consts.pm_.c:127 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../../any.pm_.c:91 ../../any.pm_.c:121 msgid "First sector of boot partition" msgstr "" #: ../../any.pm_.c:91 ../../any.pm_.c:121 ../../any.pm_.c:150 msgid "First sector of drive (MBR)" msgstr "" #: ../../any.pm_.c:95 msgid "SILO Installation" msgstr "" #: ../../any.pm_.c:96 ../../any.pm_.c:102 msgid "Where do you want to install the bootloader?" msgstr "" #: ../../any.pm_.c:101 msgid "LILO/grub Installation" msgstr "" #: ../../any.pm_.c:111 msgid "None" msgstr "" #: ../../any.pm_.c:111 msgid "Which bootloader(s) do you want to use?" msgstr "" #: ../../any.pm_.c:125 msgid "Bootloader installation" msgstr "" #: ../../any.pm_.c:127 msgid "Boot device" msgstr "" #: ../../any.pm_.c:128 msgid "LBA (doesn't work on old BIOSes)" msgstr "" #: ../../any.pm_.c:129 msgid "Compact" msgstr "" #: ../../any.pm_.c:129 msgid "compact" msgstr "" #: ../../any.pm_.c:130 msgid "Video mode" msgstr "" #: ../../any.pm_.c:132 msgid "Delay before booting default image" msgstr "" #: ../../any.pm_.c:134 ../../install_steps_interactive.pm_.c:606 #: ../../install_steps_interactive.pm_.c:657 ../../netconnect.pm_.c:522 #: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:137 #: ../../standalone/adduserdrake_.c:42 msgid "Password" msgstr "" #: ../../any.pm_.c:135 ../../install_steps_interactive.pm_.c:607 #: ../../install_steps_interactive.pm_.c:658 #: ../../standalone/adduserdrake_.c:43 msgid "Password (again)" msgstr "" #: ../../any.pm_.c:136 msgid "Restrict command line options" msgstr "" #: ../../any.pm_.c:136 msgid "restrict" msgstr "" #: ../../any.pm_.c:142 msgid "Bootloader main options" msgstr "" #: ../../any.pm_.c:145 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../../any.pm_.c:146 ../../install_steps_interactive.pm_.c:616 #: ../../install_steps_interactive.pm_.c:671 #: ../../standalone/adduserdrake_.c:56 msgid "Please try again" msgstr "" #: ../../any.pm_.c:146 ../../install_steps_interactive.pm_.c:616 #: ../../install_steps_interactive.pm_.c:671 #: ../../standalone/adduserdrake_.c:56 msgid "The passwords do not match" msgstr "" #: ../../any.pm_.c:157 msgid "" "Here are the different entries.\n" "You can add some more or change the existing ones." msgstr "" #: ../../any.pm_.c:165 ../../printerdrake.pm_.c:336 #: ../../standalone/rpmdrake_.c:302 msgid "Add" msgstr "" #: ../../any.pm_.c:165 ../../diskdrake.pm_.c:45 #: ../../install_steps_interactive.pm_.c:651 ../../printerdrake.pm_.c:336 #: ../../standalone/adduserdrake_.c:36 msgid "Done" msgstr "" #: ../../any.pm_.c:174 msgid "Which type of entry do you want to add?" msgstr "" #: ../../any.pm_.c:175 msgid "Linux" msgstr "" #: ../../any.pm_.c:175 msgid "Other OS (SunOS...)" msgstr "" #: ../../any.pm_.c:175 msgid "Other OS (windows...)" msgstr "" #: ../../any.pm_.c:196 msgid "Image" msgstr "" #: ../../any.pm_.c:197 ../../any.pm_.c:205 msgid "Root" msgstr "" #: ../../any.pm_.c:198 msgid "Append" msgstr "" #: ../../any.pm_.c:199 msgid "Initrd" msgstr "" #: ../../any.pm_.c:200 msgid "Read-write" msgstr "" #: ../../any.pm_.c:207 msgid "Table" msgstr "" #: ../../any.pm_.c:208 msgid "Unsafe" msgstr "" #: ../../any.pm_.c:214 msgid "Label" msgstr "" #: ../../any.pm_.c:216 msgid "Default" msgstr "" #: ../../any.pm_.c:219 ../../install_steps_gtk.pm_.c:608 #: ../../install_steps_interactive.pm_.c:604 ../../interactive.pm_.c:74 #: ../../interactive.pm_.c:84 ../../interactive.pm_.c:234 #: ../../interactive_newt.pm_.c:49 ../../interactive_newt.pm_.c:98 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:209 #: ../../my_gtk.pm_.c:444 ../../my_gtk.pm_.c:619 ../../printerdrake.pm_.c:369 #: ../../printerdrake.pm_.c:381 msgid "Ok" msgstr "" #: ../../any.pm_.c:219 msgid "Remove entry" msgstr "" #: ../../any.pm_.c:222 msgid "Empty label not allowed" msgstr "" #: ../../any.pm_.c:223 msgid "This label is already used" msgstr "" #: ../../any.pm_.c:420 msgid "Configuring PCMCIA cards..." msgstr "" #: ../../any.pm_.c:420 msgid "PCMCIA" msgstr "" #: ../../any.pm_.c:441 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../../any.pm_.c:442 msgid "Do you have another one?" msgstr "" #: ../../any.pm_.c:443 #, c-format msgid "Do you have any %s interfaces?" msgstr "" #: ../../any.pm_.c:445 ../../interactive.pm_.c:79 ../../my_gtk.pm_.c:443 #: ../../netconnect.pm_.c:80 ../../netconnect.pm_.c:444 #: ../../printerdrake.pm_.c:217 msgid "No" msgstr "" #: ../../any.pm_.c:445 ../../interactive.pm_.c:79 ../../my_gtk.pm_.c:443 #: ../../netconnect.pm_.c:78 ../../netconnect.pm_.c:442 msgid "Yes" msgstr "" #: ../../any.pm_.c:446 msgid "See hardware info" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:463 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../../any.pm_.c:464 #, c-format msgid "(module %s)" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:474 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../../any.pm_.c:482 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../../any.pm_.c:487 msgid "Autoprobe" msgstr "" #: ../../any.pm_.c:487 msgid "Specify options" msgstr "" #: ../../any.pm_.c:491 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../../any.pm_.c:497 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../../any.pm_.c:500 msgid "Module options:" msgstr "" #: ../../any.pm_.c:510 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../../bootloader.pm_.c:230 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" #: ../../bootloader.pm_.c:599 msgid "Welcome to GRUB the operating system chooser!" msgstr "" #: ../../bootloader.pm_.c:600 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #: ../../bootloader.pm_.c:601 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #: ../../bootloader.pm_.c:602 msgid "commands before booting, or 'c' for a command-line." msgstr "" #: ../../bootloader.pm_.c:603 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../bootloader.pm_.c:607 msgid "not enough room in /boot" msgstr "" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:686 msgid "Desktop" msgstr "" #: ../../bootloader.pm_.c:686 msgid "Start Menu" msgstr "" #: ../../diskdrake.pm_.c:20 ../../diskdrake.pm_.c:418 msgid "Create" msgstr "" #: ../../diskdrake.pm_.c:21 msgid "Unmount" msgstr "" #: ../../diskdrake.pm_.c:22 ../../diskdrake.pm_.c:420 msgid "Delete" msgstr "" #: ../../diskdrake.pm_.c:22 msgid "Format" msgstr "" #: ../../diskdrake.pm_.c:22 ../../diskdrake.pm_.c:594 msgid "Resize" msgstr "" #: ../../diskdrake.pm_.c:22 ../../diskdrake.pm_.c:418 #: ../../diskdrake.pm_.c:471 msgid "Type" msgstr "" #: ../../diskdrake.pm_.c:23 ../../diskdrake.pm_.c:491 msgid "Mount point" msgstr "" #: ../../diskdrake.pm_.c:37 msgid "Write /etc/fstab" msgstr "" #: ../../diskdrake.pm_.c:38 msgid "Toggle to expert mode" msgstr "" #: ../../diskdrake.pm_.c:39 msgid "Toggle to normal mode" msgstr "" #: ../../diskdrake.pm_.c:40 msgid "Restore from file" msgstr "" #: ../../diskdrake.pm_.c:41 msgid "Save in file" msgstr "" #: ../../diskdrake.pm_.c:42 msgid "Wizard" msgstr "" #: ../../diskdrake.pm_.c:43 msgid "Restore from floppy" msgstr "" #: ../../diskdrake.pm_.c:44 msgid "Save on floppy" msgstr "" #: ../../diskdrake.pm_.c:48 msgid "Clear all" msgstr "" #: ../../diskdrake.pm_.c:49 msgid "Format all" msgstr "" #: ../../diskdrake.pm_.c:50 msgid "Auto allocate" msgstr "" #: ../../diskdrake.pm_.c:53 msgid "All primary partitions are used" msgstr "" #: ../../diskdrake.pm_.c:53 msgid "I can't add any more partition" msgstr "" #: ../../diskdrake.pm_.c:53 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../../diskdrake.pm_.c:56 msgid "Rescue partition table" msgstr "" #: ../../diskdrake.pm_.c:57 msgid "Undo" msgstr "" #: ../../diskdrake.pm_.c:58 msgid "Write partition table" msgstr "" #: ../../diskdrake.pm_.c:59 msgid "Reload" msgstr "" #: ../../diskdrake.pm_.c:99 msgid "loopback" msgstr "" #: ../../diskdrake.pm_.c:112 msgid "Ext2" msgstr "" #: ../../diskdrake.pm_.c:112 msgid "FAT" msgstr "" #: ../../diskdrake.pm_.c:112 msgid "HFS" msgstr "" #: ../../diskdrake.pm_.c:112 msgid "SunOS" msgstr "" #: ../../diskdrake.pm_.c:112 msgid "Swap" msgstr "" #: ../../diskdrake.pm_.c:113 msgid "Empty" msgstr "" #: ../../diskdrake.pm_.c:113 msgid "Other" msgstr "" #: ../../diskdrake.pm_.c:119 msgid "Filesystem types:" msgstr "" #: ../../diskdrake.pm_.c:128 msgid "Details" msgstr "" #: ../../diskdrake.pm_.c:142 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: ../../diskdrake.pm_.c:147 msgid "Please make a backup of your data first" msgstr "" #: ../../diskdrake.pm_.c:147 ../../diskdrake.pm_.c:164 #: ../../diskdrake.pm_.c:173 ../../diskdrake.pm_.c:523 #: ../../diskdrake.pm_.c:545 msgid "Read carefully!" msgstr "" #: ../../diskdrake.pm_.c:150 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" #: ../../diskdrake.pm_.c:164 msgid "Be careful: this operation is dangerous." msgstr "" #: ../../diskdrake.pm_.c:201 ../../install_steps.pm_.c:75 #: ../../install_steps_interactive.pm_.c:42 #: ../../install_steps_interactive.pm_.c:222 ../../standalone/diskdrake_.c:60 #: ../../standalone/rpmdrake_.c:294 ../../standalone/rpmdrake_.c:304 msgid "Error" msgstr "" #: ../../diskdrake.pm_.c:226 ../../diskdrake.pm_.c:687 msgid "Mount point: " msgstr "" #: ../../diskdrake.pm_.c:227 ../../diskdrake.pm_.c:268 msgid "Device: " msgstr "" #: ../../diskdrake.pm_.c:228 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../../diskdrake.pm_.c:229 ../../diskdrake.pm_.c:271 msgid "Type: " msgstr "" #: ../../diskdrake.pm_.c:230 #, c-format msgid "Start: sector %s\n" msgstr "" #: ../../diskdrake.pm_.c:231 #, c-format msgid "Size: %d MB" msgstr "" #: ../../diskdrake.pm_.c:233 #, c-format msgid ", %s sectors" msgstr "" #: ../../diskdrake.pm_.c:235 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../../diskdrake.pm_.c:236 msgid "Formatted\n" msgstr "" #: ../../diskdrake.pm_.c:237 msgid "Not formatted\n" msgstr "" #: ../../diskdrake.pm_.c:238 msgid "Mounted\n" msgstr "" #: ../../diskdrake.pm_.c:239 #, c-format msgid "RAID md%s\n" msgstr "" #: ../../diskdrake.pm_.c:240 #, c-format msgid "Loopback file(s): %s\n" msgstr "" #: ../../diskdrake.pm_.c:241 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../../diskdrake.pm_.c:243 #, c-format msgid "Level %s\n" msgstr "" #: ../../diskdrake.pm_.c:244 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../../diskdrake.pm_.c:245 #, c-format msgid "RAID-disks %s\n" msgstr "" #: ../../diskdrake.pm_.c:247 #, c-format msgid "Loopback file name: %s" msgstr "" #: ../../diskdrake.pm_.c:264 msgid "Please click on a partition" msgstr "" #: ../../diskdrake.pm_.c:269 #, c-format msgid "Size: %d MB\n" msgstr "" #: ../../diskdrake.pm_.c:270 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../../diskdrake.pm_.c:272 #, c-format msgid "Partition table type: %s\n" msgstr "" #: ../../diskdrake.pm_.c:273 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../../diskdrake.pm_.c:286 msgid "Mount" msgstr "" #: ../../diskdrake.pm_.c:287 msgid "Active" msgstr "" #: ../../diskdrake.pm_.c:288 msgid "Add to RAID" msgstr "" #: ../../diskdrake.pm_.c:289 msgid "Remove from RAID" msgstr "" #: ../../diskdrake.pm_.c:290 msgid "Modify RAID" msgstr "" #: ../../diskdrake.pm_.c:291 msgid "Use for loopback" msgstr "" #: ../../diskdrake.pm_.c:298 msgid "Choose action" msgstr "" #: ../../diskdrake.pm_.c:391 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../../diskdrake.pm_.c:395 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../../diskdrake.pm_.c:401 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" #: ../../diskdrake.pm_.c:418 ../../diskdrake.pm_.c:420 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../../diskdrake.pm_.c:423 msgid "Use ``Unmount'' first" msgstr "" #: ../../diskdrake.pm_.c:424 ../../diskdrake.pm_.c:466 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake.pm_.c:436 msgid "Continue anyway?" msgstr "" #: ../../diskdrake.pm_.c:441 msgid "Quit without saving" msgstr "" #: ../../diskdrake.pm_.c:441 msgid "Quit without writing the partition table?" msgstr "" #: ../../diskdrake.pm_.c:469 msgid "Change partition type" msgstr "" #: ../../diskdrake.pm_.c:470 msgid "Which partition type do you want?" msgstr "" #: ../../diskdrake.pm_.c:473 ../../diskdrake.pm_.c:719 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" #: ../../diskdrake.pm_.c:489 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "" #: ../../diskdrake.pm_.c:490 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../../diskdrake.pm_.c:495 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../diskdrake.pm_.c:514 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake.pm_.c:516 msgid "Formatting" msgstr "" #: ../../diskdrake.pm_.c:517 #, c-format msgid "Formatting loopback file %s" msgstr "" #: ../../diskdrake.pm_.c:518 ../../install_steps_interactive.pm_.c:302 #, c-format msgid "Formatting partition %s" msgstr "" #: ../../diskdrake.pm_.c:523 msgid "After formatting all partitions," msgstr "" #: ../../diskdrake.pm_.c:523 msgid "all data on these partitions will be lost" msgstr "" #: ../../diskdrake.pm_.c:529 msgid "Move" msgstr "" #: ../../diskdrake.pm_.c:530 msgid "Which disk do you want to move it to?" msgstr "" #: ../../diskdrake.pm_.c:531 msgid "Sector" msgstr "" #: ../../diskdrake.pm_.c:532 msgid "Which sector do you want to move it to?" msgstr "" #: ../../diskdrake.pm_.c:535 msgid "Moving" msgstr "" #: ../../diskdrake.pm_.c:535 msgid "Moving partition..." msgstr "" #: ../../diskdrake.pm_.c:545 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../../diskdrake.pm_.c:547 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../../diskdrake.pm_.c:568 ../../install_interactive.pm_.c:94 msgid "Computing FAT filesystem bounds" msgstr "" #: ../../diskdrake.pm_.c:568 ../../diskdrake.pm_.c:622 #: ../../install_interactive.pm_.c:94 msgid "Resizing" msgstr "" #: ../../diskdrake.pm_.c:589 msgid "All data on this partition should be backed-up" msgstr "" #: ../../diskdrake.pm_.c:591 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" #: ../../diskdrake.pm_.c:601 msgid "Choose the new size" msgstr "" #: ../../diskdrake.pm_.c:601 ../../install_steps_graphical.pm_.c:287 #: ../../install_steps_graphical.pm_.c:334 ../../partition_table_raw.pm_.c:100 msgid "MB" msgstr "" #: ../../diskdrake.pm_.c:659 msgid "Create a new partition" msgstr "" #: ../../diskdrake.pm_.c:679 msgid "Start sector: " msgstr "" #: ../../diskdrake.pm_.c:683 ../../diskdrake.pm_.c:758 msgid "Size in MB: " msgstr "" #: ../../diskdrake.pm_.c:686 ../../diskdrake.pm_.c:761 msgid "Filesystem type: " msgstr "" #: ../../diskdrake.pm_.c:689 msgid "Preference: " msgstr "" #: ../../diskdrake.pm_.c:737 msgid "This partition can't be used for loopback" msgstr "" #: ../../diskdrake.pm_.c:747 msgid "Loopback" msgstr "" #: ../../diskdrake.pm_.c:757 msgid "Loopback file name: " msgstr "" #: ../../diskdrake.pm_.c:783 msgid "File already used by another loopback, choose another one" msgstr "" #: ../../diskdrake.pm_.c:784 msgid "File already exists. Use it?" msgstr "" #: ../../diskdrake.pm_.c:806 ../../diskdrake.pm_.c:822 msgid "Select file" msgstr "" #: ../../diskdrake.pm_.c:815 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../../diskdrake.pm_.c:823 msgid "Warning" msgstr "" #: ../../diskdrake.pm_.c:824 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../../diskdrake.pm_.c:835 msgid "Trying to rescue partition table" msgstr "" #: ../../diskdrake.pm_.c:846 msgid "device" msgstr "" #: ../../diskdrake.pm_.c:847 msgid "level" msgstr "" #: ../../diskdrake.pm_.c:848 msgid "chunk size" msgstr "" #: ../../diskdrake.pm_.c:860 msgid "Choose an existing RAID to add to" msgstr "" #: ../../diskdrake.pm_.c:861 msgid "new" msgstr "" #: ../../fs.pm_.c:88 ../../fs.pm_.c:94 ../../fs.pm_.c:100 ../../fs.pm_.c:106 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../../fs.pm_.c:132 #, c-format msgid "I don't know how to format %s in type %s" msgstr "" #: ../../fs.pm_.c:189 msgid "nfs mount failed" msgstr "" #: ../../fs.pm_.c:216 msgid "mount failed: " msgstr "" #: ../../fs.pm_.c:227 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../../fsedit.pm_.c:242 msgid "Mount points must begin with a leading /" msgstr "" #: ../../fsedit.pm_.c:245 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "" #: ../../fsedit.pm_.c:253 #, c-format msgid "Circular mounts %s\n" msgstr "" #: ../../fsedit.pm_.c:265 msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n" msgstr "" #: ../../fsedit.pm_.c:341 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../../fsedit.pm_.c:423 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../../fsedit.pm_.c:437 msgid "You don't have any partitions!" msgstr "" #: ../../help.pm_.c:7 msgid "Choose preferred language for install and system usage." msgstr "" #: ../../help.pm_.c:10 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "" #: ../../help.pm_.c:13 #, c-format msgid "" "Choose \"Install\" if there are no previous versions of GNU/Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake " "Linux:\n" "%s or %s.\n" "\n" "\n" "Select:\n" "\n" " - Recommended: If you have never installed GNU/Linux before, choose this.\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!\n" msgstr "" #: ../../help.pm_.c:34 msgid "" "Select:\n" "\n" " - Customized: If you are familiar enough with GNU/Linux, you may then " "choose\n" " the primary usage for your machine. See below for details.\n" "\n" " - Expert: This supposes that you are fluent with GNU/Linux and want to\n" " perform a highly customized installation. As for a \"Customized\"\n" " installation class, you will be able to select the usage for your " "system.\n" " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE " "DOING!\n" msgstr "" #: ../../help.pm_.c:46 msgid "" "The different choices for your machine's usage (provided, hence, that you " "have\n" "chosen either \"Custom\" or \"Expert\" as an installation class) are the\n" "following:\n" "\n" " - Normal: choose this if you intend to use your machine primarily for\n" " everyday use (office work, graphics manipulation and so on). Do not\n" " expect any compiler, development utility et al. installed.\n" "\n" " - Development: as its name says. Choose this if you intend to use your\n" " machine primarily for software development. You will then have a " "complete\n" " collection of software installed in order to compile, debug and format\n" " source code, or create software packages.\n" "\n" " - Server: choose this if the machine which you're installing " "Linux-Mandrake\n" " on is intended to be used as a server. Either a file server (NFS or " "SMB),\n" " a print server (Unix' lp (Line Printer) protocol or Windows style SMB\n" " printing), an authentication server (NIS), a database server and so on. " "As\n" " such, do not expect any gimmicks (KDE, GNOME...) to be installed.\n" msgstr "" #: ../../help.pm_.c:67 msgid "" "DrakX will attempt to look for PCI SCSI adapter(s). \n" "If DrakX finds a SCSI adapter and knows which driver to use it will\n" "automatically install it (or them).\n" "\n" "If you have no SCSI adapter, an ISA SCSI adapter, or a\n" "PCI SCSI adapter that DrakX doesn't recognize you will be asked if a\n" "SCSI adapter is present in your system. If there is no adapter present\n" "you can just click 'No'. If you click 'Yes' a list of drivers will be\n" "presented from which you can select your specific adapter.\n" "\n" "\n" "If you had to manually specify your adapter, DrakX will\n" "ask if you want to specify options for it. You should allow DrakX to\n" "probe the hardware for the options. This usually works well.\n" "\n" "If not, you will need to provide options to the driver.\n" "Review the Installation Guide for hints on retrieving this\n" "information from Windows (if you have it on your system),\n" "from hardware documentation, or from the manufacturer's\n" "website (if you have Internet access)." msgstr "" #: ../../help.pm_.c:89 msgid "" "At this point, you may choose what partition(s) to use to install\n" "your Linux-Mandrake system if they have been already defined (from a\n" "previous install of GNU/Linux or from another partitioning tool). In other\n" "cases, hard drive partitions must be defined. This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "If you have to create new partitions, use \"Auto allocate\" to " "automatically\n" "create partitions for GNU/Linux. You can select the disk for partitioning " "by\n" "clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced user. DiskDrake\n" "simplifies the process so that it must not be. Consult the documentation\n" "and take your time before proceeding.\n" "\n" "\n" "You can reach any option using the keyboard: navigate through the " "partitions\n" "using Tab and Up/Down arrows. When a partition is selected, you can use:\n" "\n" "- Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" "- Ctrl-d to delete a partition\n" "\n" "- Ctrl-m to set the mount point\n" msgstr "" #: ../../help.pm_.c:126 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" #: ../../help.pm_.c:134 msgid "" "You may now select the group of packages you wish to\n" "install or upgrade.\n" "\n" "DrakX will then check whether you have enough room to install them all. If " "not,\n" "it will warn you about it. If you want to go on anyway, it will proceed " "onto\n" "the installation of all selected groups but will drop some packages of " "lesser\n" "interest. At the bottom of the list you can select the option\n" "\"Individual package selection\"; in this case you will have to browse\n" "through more than 1000 packages..." msgstr "" #: ../../help.pm_.c:145 msgid "" "If you have all the CDs in the list above, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../help.pm_.c:150 msgid "" "The packages selected are now being installed. This operation\n" "should take a few minutes unless you have chosen to upgrade an\n" "existing system, in that case it can take more time even before\n" "upgrade starts." msgstr "" #: ../../help.pm_.c:156 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX's settings, just click 'Ok'.\n" "Otherwise you may choose the mouse that more closely matches your own\n" "from the menu above.\n" "\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" #: ../../help.pm_.c:170 msgid "" "Please select the correct port. For example, the COM1 port under MS Windows\n" "is named ttyS0 under GNU/Linux." msgstr "" #: ../../help.pm_.c:174 msgid "" "This section is dedicated to configuring a local area\n" "network (LAN) or a modem.\n" "\n" "Choose \"Local LAN\" and DrakX will\n" "try to find an Ethernet adapter on your machine. PCI adapters\n" "should be found and initialized automatically.\n" "However, if your peripheral is ISA, autodetection will not work,\n" "and you will have to choose a driver from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from documentation of your\n" "hardware.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses.\n" "\n" "\n" "Choose \"Dialup with modem\" and the Internet connection with\n" "a modem will be configured. DrakX will try to find your modem,\n" "if it fails you will have to select the right serial port where\n" "your modem is connected to." msgstr "" #: ../../help.pm_.c:204 msgid "" "Enter:\n" "\n" " - IP address: if you don't know it, ask your network administrator or " "ISP.\n" "\n" "\n" " - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n" "sure, ask your network administrator or ISP.\n" "\n" "\n" " - Automatic IP: If your network uses BOOTP or DHCP protocol, select \n" "this option. If selected, no value is needed in \"IP address\". If you are\n" "not sure, ask your network administrator or ISP.\n" msgstr "" #: ../../help.pm_.c:219 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" #: ../../help.pm_.c:223 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you should use proxies, ask your network administrator or your ISP." msgstr "" #: ../../help.pm_.c:227 msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" #: ../../help.pm_.c:235 msgid "" "You can now select your timezone according to where you live.\n" "\n" "\n" "GNU/Linux manages time in GMT or \"Greenwich Mean Time\" and translates it\n" "in local time according to the time zone you have selected." msgstr "" #: ../../help.pm_.c:242 msgid "" "You may now choose which services you want to see started at boot time.\n" "When your mouse comes over an item, a small balloon help will popup which\n" "describes the role of the service.\n" "\n" "Be especially careful in this step if you intend to use your machine as a\n" "server: you will probably want not to start any services which you don't\n" "want." msgstr "" #: ../../help.pm_.c:251 msgid "" "GNU/Linux can deal with many types of printer. Each of these\n" "types require a different setup. Note however that the print\n" "spooler uses 'lp' as the default printer name; so you\n" "must have one printer with such a name; but you can give\n" "several names, separated by '|' characters, to a printer.\n" "So, if you prefer to have a more meaningful name you just have\n" "to put it first, eg: \"My Printer|lp\".\n" "The printer having \"lp\" in its name(s) will be the default printer.\n" "\n" "\n" "If your printer is physically connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../../help.pm_.c:280 msgid "" "You can now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should NEVER be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../../help.pm_.c:296 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" #: ../../help.pm_.c:300 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" #: ../../help.pm_.c:304 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" #: ../../help.pm_.c:323 msgid "" "It is strongly recommended that you answer \"Yes\" here. If you install\n" "Microsoft Windows at a later date it will overwrite the boot sector.\n" "Unless you have made a bootdisk as suggested, you will not be able to\n" "boot into GNU/Linux any more." msgstr "" #: ../../help.pm_.c:329 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to GNU/Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" #: ../../help.pm_.c:337 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" " (primary master IDE disk) or \"/dev/sda\" (first SCSI disk)." msgstr "" #: ../../help.pm_.c:341 msgid "" "LILO (the LInux LOader) and Grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" #: ../../help.pm_.c:353 msgid "" "LILO and grub main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" " * normal: select normal 80x25 text mode.\n" " * : use the corresponding text mode." msgstr "" #: ../../help.pm_.c:372 msgid "" "SILO is a bootloader for SPARC: it is able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "You may also want not to give access to these other operating systems to\n" "anyone, in which case you can delete the corresponding entries. But\n" "in this case, you will need a boot disk in order to boot them!" msgstr "" #: ../../help.pm_.c:384 msgid "" "SILO main options are:\n" " - Bootloader installation: Indicate where you want to place the\n" "information required to boot to GNU/Linux. Unless you know exactly\n" "what you are doing, choose \"First sector of drive (MBR)\".\n" "\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero." msgstr "" #: ../../help.pm_.c:397 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" #: ../../help.pm_.c:410 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "" #: ../../help.pm_.c:414 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" #: ../../help.pm_.c:418 msgid "" "You can now select some miscellaneous options for your system.\n" "\n" " - Use hard drive optimizations: this option can improve hard disk " "performance\n" " but is only for advanced users: some buggy chipsets can ruin your data, " "so\n" " beware. Note that the kernel has a builtin blacklist of drives and\n" " chipsets, but if you want to avoid bad surprises, leave this option " "unset.\n" "\n" " - Choose security level: you can choose a security level for your\n" " system. Please refer to the manual for complete information. Basically: " "if\n" " you don't know, select \"Medium\".\n" "\n" " - Precise RAM size if needed: unfortunately, in today's PC world, there is " "no\n" " standard method to ask the BIOS about the amount of RAM present in your\n" " computer. As a consequence, GNU/Linux may fail to detect your amount of " "RAM\n" " correctly. If this is the case, you can specify the correct amount of " "RAM\n" " here. Note that a difference of 2 or 4 MB is normal.\n" "\n" " - Removable media automounting: if you would prefer not to manually\n" " mount removable media (CD-ROM, Floppy, Zip) by typing \"mount\" and\n" " \"umount\", select this option. \n" "\n" " - Enable NumLock at startup: if you want NumLock enabled after booting,\n" " select this option (Note: NumLock may or may not work under X)." msgstr "" #: ../../help.pm_.c:443 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" #: ../../install2.pm_.c:43 msgid "Choose your language" msgstr "" #: ../../install2.pm_.c:44 msgid "Select installation class" msgstr "" #: ../../install2.pm_.c:45 msgid "Hard drive detection" msgstr "" #: ../../install2.pm_.c:46 msgid "Configure mouse" msgstr "" #: ../../install2.pm_.c:47 msgid "Choose your keyboard" msgstr "" #: ../../install2.pm_.c:48 ../../install_steps_interactive.pm_.c:372 msgid "Miscellaneous" msgstr "" #: ../../install2.pm_.c:49 msgid "Setup filesystems" msgstr "" #: ../../install2.pm_.c:50 msgid "Format partitions" msgstr "" #: ../../install2.pm_.c:51 msgid "Choose packages to install" msgstr "" #: ../../install2.pm_.c:52 msgid "Install system" msgstr "" #: ../../install2.pm_.c:53 msgid "Configure networking" msgstr "" #: ../../install2.pm_.c:54 msgid "Cryptographic" msgstr "" #: ../../install2.pm_.c:55 msgid "Configure timezone" msgstr "" #: ../../install2.pm_.c:56 msgid "Configure services" msgstr "" #: ../../install2.pm_.c:57 msgid "Configure printer" msgstr "" #: ../../install2.pm_.c:58 ../../install_steps_interactive.pm_.c:604 #: ../../install_steps_interactive.pm_.c:605 msgid "Set root password" msgstr "" #: ../../install2.pm_.c:59 msgid "Add a user" msgstr "" #: ../../install2.pm_.c:61 msgid "Create a bootdisk" msgstr "" #: ../../install2.pm_.c:63 msgid "Install bootloader" msgstr "" #: ../../install2.pm_.c:64 msgid "Configure X" msgstr "" #: ../../install2.pm_.c:66 msgid "Auto install floppy" msgstr "" #: ../../install2.pm_.c:68 msgid "Exit install" msgstr "" #: ../../install_any.pm_.c:573 msgid "Error reading file $f" msgstr "" #: ../../install_interactive.pm_.c:30 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: ../../install_interactive.pm_.c:35 ../../install_steps_graphical.pm_.c:259 msgid "You must have a swap partition" msgstr "" #: ../../install_interactive.pm_.c:36 ../../install_steps_graphical.pm_.c:261 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" #: ../../install_interactive.pm_.c:57 msgid "Use free space" msgstr "" #: ../../install_interactive.pm_.c:59 msgid "Not enough free space to allocate new partitions" msgstr "" #: ../../install_interactive.pm_.c:68 msgid "Use existing partition" msgstr "" #: ../../install_interactive.pm_.c:70 msgid "There is no existing partition to use" msgstr "" #: ../../install_interactive.pm_.c:77 msgid "Use the FAT partition for loopback" msgstr "" #: ../../install_interactive.pm_.c:80 msgid "Which partition do you want to use to put Linux4Win?" msgstr "" #: ../../install_interactive.pm_.c:81 msgid "Choose the sizes" msgstr "" #: ../../install_interactive.pm_.c:82 msgid "Root partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:83 msgid "Swap partition size in MB: " msgstr "" #: ../../install_interactive.pm_.c:91 msgid "Use the free space on the FAT partition" msgstr "" #: ../../install_interactive.pm_.c:93 msgid "Which partition do you want to resize?" msgstr "" #: ../../install_interactive.pm_.c:96 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_interactive.pm_.c:99 msgid "Your windows partition is too fragmented, please run ``defrag'' first" msgstr "" #: ../../install_interactive.pm_.c:100 msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this operation is\n" "dangerous. If you have not already done so, you should first exit the\n" "installation, run scandisk under Windows (and optionally run defrag), then\n" "restart the installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../install_interactive.pm_.c:109 msgid "Which size do you want to keep for windows on" msgstr "" #: ../../install_interactive.pm_.c:110 #, c-format msgid "partition %s" msgstr "" #: ../../install_interactive.pm_.c:116 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: ../../install_interactive.pm_.c:131 msgid "" "There is no FAT partitions to resize or to use as loopback (or not enough " "space left)" msgstr "" #: ../../install_interactive.pm_.c:137 msgid "Remove Windows(TM)" msgstr "" #: ../../install_interactive.pm_.c:137 msgid "Take over the hard drive" msgstr "" #: ../../install_interactive.pm_.c:139 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../install_interactive.pm_.c:141 #, c-format msgid "All existing partitions and their data will be lost on drive %s" msgstr "" #: ../../install_interactive.pm_.c:149 msgid "Use diskdrake" msgstr "" #: ../../install_interactive.pm_.c:153 msgid "Use fdisk" msgstr "" #: ../../install_interactive.pm_.c:156 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../install_interactive.pm_.c:182 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../install_interactive.pm_.c:186 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../install_interactive.pm_.c:201 msgid "Bringing up the network" msgstr "" #: ../../install_interactive.pm_.c:206 msgid "Bringing down the network" msgstr "" #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps.pm_.c:192 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../../install_steps.pm_.c:357 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" msgstr "" #: ../../install_steps.pm_.c:425 #, c-format msgid "Welcome to %s" msgstr "" #: ../../install_steps.pm_.c:649 msgid "No floppy drive available" msgstr "" #: ../../install_steps_auto_install.pm_.c:45 #: ../../install_steps_stdio.pm_.c:26 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../../install_steps_graphical.pm_.c:287 msgid "Choose the size you want to install" msgstr "" #: ../../install_steps_graphical.pm_.c:334 msgid "Total size: " msgstr "" #: ../../install_steps_graphical.pm_.c:346 ../../install_steps_gtk.pm_.c:356 #: ../../standalone/rpmdrake_.c:136 #, c-format msgid "Version: %s\n" msgstr "" #: ../../install_steps_graphical.pm_.c:347 ../../install_steps_gtk.pm_.c:357 #: ../../standalone/rpmdrake_.c:137 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../../install_steps_graphical.pm_.c:462 ../../install_steps_gtk.pm_.c:264 msgid "Choose the packages you want to install" msgstr "" #: ../../install_steps_graphical.pm_.c:465 ../../install_steps_gtk.pm_.c:267 msgid "Info" msgstr "" #: ../../install_steps_graphical.pm_.c:473 ../../install_steps_gtk.pm_.c:272 #: ../../install_steps_interactive.pm_.c:132 ../../standalone/rpmdrake_.c:161 msgid "Install" msgstr "" #: ../../install_steps_graphical.pm_.c:492 ../../install_steps_gtk.pm_.c:467 #: ../../install_steps_interactive.pm_.c:442 msgid "Installing" msgstr "" #: ../../install_steps_graphical.pm_.c:499 ../../install_steps_gtk.pm_.c:473 msgid "Please wait, " msgstr "" #: ../../install_steps_graphical.pm_.c:501 ../../install_steps_gtk.pm_.c:475 msgid "Time remaining " msgstr "" #: ../../install_steps_graphical.pm_.c:502 ../../install_steps_gtk.pm_.c:476 msgid "Total time " msgstr "" #: ../../install_steps_graphical.pm_.c:507 ../../install_steps_gtk.pm_.c:485 #: ../../install_steps_interactive.pm_.c:442 msgid "Preparing installation" msgstr "" #: ../../install_steps_graphical.pm_.c:528 ../../install_steps_gtk.pm_.c:501 #, c-format msgid "Installing package %s" msgstr "" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:542 #: ../../install_steps_gtk.pm_.c:546 msgid "Go on anyway?" msgstr "" #: ../../install_steps_graphical.pm_.c:553 ../../install_steps_gtk.pm_.c:542 msgid "There was an error ordering packages:" msgstr "" #: ../../install_steps_graphical.pm_.c:577 #: ../../install_steps_interactive.pm_.c:841 msgid "Use existing configuration for X11?" msgstr "" #: ../../install_steps_gtk.pm_.c:154 msgid "" "Your system is low on resource. You may have some problem installing\n" "Linux-Mandrake. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_steps_gtk.pm_.c:167 msgid "Please, choose one of the following classes of installation:" msgstr "" #: ../../install_steps_gtk.pm_.c:220 #, c-format msgid "" "The total size for the groups you have selected is approximately %d MB.\n" msgstr "" #: ../../install_steps_gtk.pm_.c:222 msgid "" "If you wish to install less than this size,\n" "select the percentage of packages that you want to install.\n" "\n" "A low percentage will install only the most important packages;\n" "a percentage of 100%% will install all selected packages." msgstr "" #: ../../install_steps_gtk.pm_.c:227 msgid "" "You have space on your disk for only %d%% of these packages.\n" "\n" "If you wish to install less than this,\n" "select the percentage of packages that you want to install.\n" "A low percentage will install only the most important packages;\n" "a percentage of %d%% will install as many packages as possible." msgstr "" #: ../../install_steps_gtk.pm_.c:233 msgid "You will be able to choose them more specifically in the next step." msgstr "" #: ../../install_steps_gtk.pm_.c:235 msgid "Percentage of packages to install" msgstr "" #: ../../install_steps_gtk.pm_.c:276 msgid "Automatic dependencies" msgstr "" #: ../../install_steps_gtk.pm_.c:335 ../../standalone/rpmdrake_.c:101 msgid "Expand Tree" msgstr "" #: ../../install_steps_gtk.pm_.c:336 ../../standalone/rpmdrake_.c:102 msgid "Collapse Tree" msgstr "" #: ../../install_steps_gtk.pm_.c:337 msgid "Toggle between flat and group sorted" msgstr "" #: ../../install_steps_gtk.pm_.c:354 msgid "Bad package" msgstr "" #: ../../install_steps_gtk.pm_.c:355 #, c-format msgid "Name: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:358 #, c-format msgid "Importance: %s\n" msgstr "" #: ../../install_steps_gtk.pm_.c:366 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_gtk.pm_.c:385 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../install_steps_gtk.pm_.c:388 msgid "The following packages are going to be installed/removed" msgstr "" #: ../../install_steps_gtk.pm_.c:397 msgid "You can't select/unselect this package" msgstr "" #: ../../install_steps_gtk.pm_.c:416 msgid "This is a mandatory package, it can't be unselected" msgstr "" #: ../../install_steps_gtk.pm_.c:418 msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../install_steps_gtk.pm_.c:422 msgid "" "This package must be upgraded\n" "Are you sure you want to deselect it?" msgstr "" #: ../../install_steps_gtk.pm_.c:425 msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_gtk.pm_.c:470 msgid "Estimating" msgstr "" #: ../../install_steps_gtk.pm_.c:482 ../../install_steps_interactive.pm_.c:579 #: ../../interactive.pm_.c:84 ../../interactive.pm_.c:233 #: ../../interactive_newt.pm_.c:49 ../../interactive_newt.pm_.c:98 #: ../../interactive_stdio.pm_.c:27 ../../my_gtk.pm_.c:210 #: ../../my_gtk.pm_.c:444 msgid "Cancel" msgstr "" #: ../../install_steps_gtk.pm_.c:496 #, c-format msgid "%d packages" msgstr "" #: ../../install_steps_gtk.pm_.c:527 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../install_steps_gtk.pm_.c:546 msgid "There was an error installing packages:" msgstr "" #: ../../install_steps_interactive.pm_.c:42 msgid "An error occurred" msgstr "" #: ../../install_steps_interactive.pm_.c:58 msgid "Please, choose a language to use." msgstr "" #: ../../install_steps_interactive.pm_.c:80 #: ../../standalone/keyboarddrake_.c:21 msgid "Keyboard" msgstr "" #: ../../install_steps_interactive.pm_.c:81 #: ../../standalone/keyboarddrake_.c:22 msgid "Please, choose your keyboard layout." msgstr "" #: ../../install_steps_interactive.pm_.c:90 msgid "You can choose other languages that will be available after install" msgstr "" #: ../../install_steps_interactive.pm_.c:99 #: ../../install_steps_interactive.pm_.c:143 msgid "Install Class" msgstr "" #: ../../install_steps_interactive.pm_.c:99 msgid "Which installation class do you want?" msgstr "" #: ../../install_steps_interactive.pm_.c:101 msgid "Install/Rescue" msgstr "" #: ../../install_steps_interactive.pm_.c:101 msgid "Is this an install or a rescue?" msgstr "" #: ../../install_steps_interactive.pm_.c:110 msgid "Recommended" msgstr "" #: ../../install_steps_interactive.pm_.c:112 #: ../../install_steps_interactive.pm_.c:127 msgid "Customized" msgstr "" #: ../../install_steps_interactive.pm_.c:113 #: ../../install_steps_interactive.pm_.c:127 msgid "Expert" msgstr "" #: ../../install_steps_interactive.pm_.c:122 msgid "" "Are you sure you are an expert? \n" "You will be allowed to make powerful but dangerous things here.\n" "\n" "You will be asked questions such as: ``Use shadow file for passwords?'',\n" "are you ready to answer that kind of questions?" msgstr "" #: ../../install_steps_interactive.pm_.c:132 msgid "Rescue" msgstr "" #: ../../install_steps_interactive.pm_.c:138 msgid "Workstation" msgstr "" #: ../../install_steps_interactive.pm_.c:139 msgid "Development" msgstr "" #: ../../install_steps_interactive.pm_.c:140 msgid "Server" msgstr "" #: ../../install_steps_interactive.pm_.c:144 msgid "Which usage is your system used for ?" msgstr "" #: ../../install_steps_interactive.pm_.c:158 msgid "Please, choose the type of your mouse." msgstr "" #: ../../install_steps_interactive.pm_.c:165 ../../standalone/mousedrake_.c:38 msgid "Mouse Port" msgstr "" #: ../../install_steps_interactive.pm_.c:166 msgid "Please choose on which serial port your mouse is connected to." msgstr "" #: ../../install_steps_interactive.pm_.c:184 msgid "Configuring IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:184 msgid "IDE" msgstr "" #: ../../install_steps_interactive.pm_.c:195 msgid "no available partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:206 msgid "Choose the mount points" msgstr "" #: ../../install_steps_interactive.pm_.c:223 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on blanking bad partitions (ALL DATA will be lost!).\n" "The other solution is to disallow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" #: ../../install_steps_interactive.pm_.c:236 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../../install_steps_interactive.pm_.c:244 msgid "Root Partition" msgstr "" #: ../../install_steps_interactive.pm_.c:245 msgid "What is the root partition (/) of your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:259 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../../install_steps_interactive.pm_.c:285 msgid "Choose the partitions you want to format" msgstr "" #: ../../install_steps_interactive.pm_.c:289 msgid "Check bad blocks?" msgstr "" #: ../../install_steps_interactive.pm_.c:297 msgid "Formatting partitions" msgstr "" #: ../../install_steps_interactive.pm_.c:301 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../install_steps_interactive.pm_.c:304 msgid "Not enough swap to fulfill installation, please add some" msgstr "" #: ../../install_steps_interactive.pm_.c:310 msgid "Looking for available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:316 msgid "Finding packages to upgrade" msgstr "" #: ../../install_steps_interactive.pm_.c:333 #, c-format msgid "" "Your system has not enough space left for installation or upgrade (%d > %d)" msgstr "" #: ../../install_steps_interactive.pm_.c:348 #, c-format msgid "Complete (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:348 #, c-format msgid "Minimum (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:348 #, c-format msgid "Recommended (%dMB)" msgstr "" #: ../../install_steps_interactive.pm_.c:349 msgid "Select the size you want to install" msgstr "" #: ../../install_steps_interactive.pm_.c:371 msgid "Package Group Selection" msgstr "" #: ../../install_steps_interactive.pm_.c:374 msgid "Individual package selection" msgstr "" #: ../../install_steps_interactive.pm_.c:420 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../install_steps_interactive.pm_.c:423 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../install_steps_interactive.pm_.c:451 msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../install_steps_interactive.pm_.c:460 msgid "Post-install configuration" msgstr "" #: ../../install_steps_interactive.pm_.c:484 msgid "" "You have now the possibility to download software aimed for encryption.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" #: ../../install_steps_interactive.pm_.c:515 msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_steps_interactive.pm_.c:523 msgid "Contacting the mirror to get the list of available packages" msgstr "" #: ../../install_steps_interactive.pm_.c:527 msgid "Please choose the packages you want to install." msgstr "" #: ../../install_steps_interactive.pm_.c:540 msgid "Which is your timezone?" msgstr "" #: ../../install_steps_interactive.pm_.c:541 msgid "Is your hardware clock set to GMT?" msgstr "" #: ../../install_steps_interactive.pm_.c:578 msgid "What printing system do you want to use?" msgstr "" #: ../../install_steps_interactive.pm_.c:604 msgid "No password" msgstr "" #: ../../install_steps_interactive.pm_.c:609 msgid "Use shadow file" msgstr "" #: ../../install_steps_interactive.pm_.c:609 msgid "shadow" msgstr "" #: ../../install_steps_interactive.pm_.c:610 msgid "MD5" msgstr "" #: ../../install_steps_interactive.pm_.c:610 msgid "Use MD5 passwords" msgstr "" #: ../../install_steps_interactive.pm_.c:612 msgid "Use NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:612 msgid "yellow pages" msgstr "" #: ../../install_steps_interactive.pm_.c:618 #, c-format msgid "This password is too simple (must be at least %d characters long)" msgstr "" #: ../../install_steps_interactive.pm_.c:625 msgid "Authentification NIS" msgstr "" #: ../../install_steps_interactive.pm_.c:626 msgid "NIS Domain" msgstr "" #: ../../install_steps_interactive.pm_.c:626 msgid "NIS Server" msgstr "" #: ../../install_steps_interactive.pm_.c:651 #: ../../standalone/adduserdrake_.c:36 msgid "Accept user" msgstr "" #: ../../install_steps_interactive.pm_.c:651 #: ../../standalone/adduserdrake_.c:36 msgid "Add user" msgstr "" #: ../../install_steps_interactive.pm_.c:652 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "(already added %s)" msgstr "" #: ../../install_steps_interactive.pm_.c:652 #: ../../standalone/adduserdrake_.c:37 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../../install_steps_interactive.pm_.c:654 #: ../../standalone/adduserdrake_.c:39 msgid "Real name" msgstr "" #: ../../install_steps_interactive.pm_.c:655 ../../printerdrake.pm_.c:102 #: ../../printerdrake.pm_.c:136 ../../standalone/adduserdrake_.c:40 msgid "User name" msgstr "" #: ../../install_steps_interactive.pm_.c:660 #: ../../standalone/adduserdrake_.c:45 msgid "Shell" msgstr "" #: ../../install_steps_interactive.pm_.c:662 #: ../../standalone/adduserdrake_.c:47 msgid "Icon" msgstr "" #: ../../install_steps_interactive.pm_.c:672 #: ../../standalone/adduserdrake_.c:57 msgid "This password is too simple" msgstr "" #: ../../install_steps_interactive.pm_.c:673 #: ../../standalone/adduserdrake_.c:58 msgid "Please give a user name" msgstr "" #: ../../install_steps_interactive.pm_.c:674 #: ../../standalone/adduserdrake_.c:59 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../../install_steps_interactive.pm_.c:675 #: ../../standalone/adduserdrake_.c:60 msgid "This user name is already added" msgstr "" #: ../../install_steps_interactive.pm_.c:699 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" #: ../../install_steps_interactive.pm_.c:715 msgid "First floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:716 msgid "Second floppy drive" msgstr "" #: ../../install_steps_interactive.pm_.c:717 msgid "Skip" msgstr "" #: ../../install_steps_interactive.pm_.c:722 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../../install_steps_interactive.pm_.c:731 msgid "Sorry, no floppy drive available" msgstr "" #: ../../install_steps_interactive.pm_.c:734 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:740 #, c-format msgid "Insert a floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:743 msgid "Creating bootdisk" msgstr "" #: ../../install_steps_interactive.pm_.c:750 msgid "Preparing bootloader" msgstr "" #: ../../install_steps_interactive.pm_.c:758 msgid "Do you want to use aboot?" msgstr "" #: ../../install_steps_interactive.pm_.c:761 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../install_steps_interactive.pm_.c:770 msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../install_steps_interactive.pm_.c:784 ../../standalone/draksec_.c:20 msgid "Welcome To Crackers" msgstr "" #: ../../install_steps_interactive.pm_.c:785 ../../standalone/draksec_.c:21 msgid "Poor" msgstr "" #: ../../install_steps_interactive.pm_.c:786 ../../standalone/draksec_.c:22 msgid "Low" msgstr "" #: ../../install_steps_interactive.pm_.c:787 ../../standalone/draksec_.c:23 msgid "Medium" msgstr "" #: ../../install_steps_interactive.pm_.c:788 ../../standalone/draksec_.c:24 msgid "High" msgstr "" #: ../../install_steps_interactive.pm_.c:789 ../../standalone/draksec_.c:25 msgid "Paranoid" msgstr "" #: ../../install_steps_interactive.pm_.c:802 msgid "Miscellaneous questions" msgstr "" #: ../../install_steps_interactive.pm_.c:803 msgid "(may cause data corruption)" msgstr "" #: ../../install_steps_interactive.pm_.c:803 msgid "Use hard drive optimisations?" msgstr "" #: ../../install_steps_interactive.pm_.c:804 ../../standalone/draksec_.c:46 msgid "Choose security level" msgstr "" #: ../../install_steps_interactive.pm_.c:805 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../../install_steps_interactive.pm_.c:807 msgid "Removable media automounting" msgstr "" #: ../../install_steps_interactive.pm_.c:809 msgid "Clean /tmp at each boot" msgstr "" #: ../../install_steps_interactive.pm_.c:812 msgid "Enable multi profiles" msgstr "" #: ../../install_steps_interactive.pm_.c:814 msgid "Enable num lock at startup" msgstr "" #: ../../install_steps_interactive.pm_.c:817 msgid "Give the ram size in MB" msgstr "" #: ../../install_steps_interactive.pm_.c:819 msgid "Can't use supermount in high security level" msgstr "" #: ../../install_steps_interactive.pm_.c:821 msgid "" "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n" "If you want to be root, you have to login as a user and then use \"su\".\n" "More generally, do not expect to use your machine for anything but as a " "server.\n" "You have been warned." msgstr "" #: ../../install_steps_interactive.pm_.c:826 msgid "" "Be carefull, having numlock enabled causes a lot of keystrokes to\n" "give digits instead of normal letters (eg: pressing `p' gives `6')" msgstr "" #: ../../install_steps_interactive.pm_.c:847 msgid "" "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n" "By default, the 4.0 server is used unless your card is not supported.\n" "\n" "Do you want to keep XFree 3.3?" msgstr "" #: ../../install_steps_interactive.pm_.c:878 msgid "Do you want to generate an auto install floppy for linux replication?" msgstr "" #: ../../install_steps_interactive.pm_.c:880 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../install_steps_interactive.pm_.c:894 msgid "Creating auto install floppy" msgstr "" #: ../../install_steps_newt.pm_.c:22 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "" #: ../../install_steps_newt.pm_.c:33 msgid "" " / between elements | selects | next screen " msgstr "" #: ../../interactive.pm_.c:254 msgid "Please wait" msgstr "" #: ../../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "" #: ../../interactive_stdio.pm_.c:36 ../../interactive_stdio.pm_.c:51 #: ../../interactive_stdio.pm_.c:70 msgid "Bad choice, try again\n" msgstr "" #: ../../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr "" #: ../../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../interactive_stdio.pm_.c:71 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "" #: ../../keyboard.pm_.c:104 ../../keyboard.pm_.c:134 msgid "Czech" msgstr "" #: ../../keyboard.pm_.c:105 ../../keyboard.pm_.c:118 ../../keyboard.pm_.c:135 msgid "German" msgstr "" #: ../../keyboard.pm_.c:106 msgid "Dvorak" msgstr "" #: ../../keyboard.pm_.c:107 ../../keyboard.pm_.c:141 msgid "Spanish" msgstr "" #: ../../keyboard.pm_.c:108 ../../keyboard.pm_.c:142 msgid "Finnish" msgstr "" #: ../../keyboard.pm_.c:109 ../../keyboard.pm_.c:119 ../../keyboard.pm_.c:143 msgid "French" msgstr "" #: ../../keyboard.pm_.c:110 ../../keyboard.pm_.c:162 msgid "Norwegian" msgstr "" #: ../../keyboard.pm_.c:111 msgid "Polish" msgstr "" #: ../../keyboard.pm_.c:112 ../../keyboard.pm_.c:167 msgid "Russian" msgstr "" #: ../../keyboard.pm_.c:113 ../../keyboard.pm_.c:176 msgid "UK keyboard" msgstr "" #: ../../keyboard.pm_.c:114 ../../keyboard.pm_.c:117 ../../keyboard.pm_.c:177 msgid "US keyboard" msgstr "" #: ../../keyboard.pm_.c:121 msgid "Armenian (old)" msgstr "" #: ../../keyboard.pm_.c:122 msgid "Armenian (typewriter)" msgstr "" #: ../../keyboard.pm_.c:123 msgid "Armenian (phonetic)" msgstr "" #: ../../keyboard.pm_.c:126 msgid "Azerbaidjani (latin)" msgstr "" #: ../../keyboard.pm_.c:127 msgid "Azerbaidjani (cyrillic)" msgstr "" #: ../../keyboard.pm_.c:128 msgid "Belgian" msgstr "" #: ../../keyboard.pm_.c:129 msgid "Bulgarian" msgstr "" #: ../../keyboard.pm_.c:130 msgid "Brazilian (ABNT-2)" msgstr "" #: ../../keyboard.pm_.c:131 msgid "Belarusian" msgstr "" #: ../../keyboard.pm_.c:132 msgid "Swiss (German layout)" msgstr "" #: ../../keyboard.pm_.c:133 msgid "Swiss (French layout)" msgstr "" #: ../../keyboard.pm_.c:136 msgid "German (no dead keys)" msgstr "" #: ../../keyboard.pm_.c:137 msgid "Danish" msgstr "" #: ../../keyboard.pm_.c:138 msgid "Dvorak (US)" msgstr "" #: ../../keyboard.pm_.c:139 msgid "Dvorak (Norwegian)" msgstr "" #: ../../keyboard.pm_.c:140 msgid "Estonian" msgstr "" #: ../../keyboard.pm_.c:144 msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../keyboard.pm_.c:145 msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../../keyboard.pm_.c:146 msgid "Greek" msgstr "" #: ../../keyboard.pm_.c:147 msgid "Hungarian" msgstr "" #: ../../keyboard.pm_.c:148 msgid "Croatian" msgstr "" #: ../../keyboard.pm_.c:149 msgid "Israeli" msgstr "" #: ../../keyboard.pm_.c:150 msgid "Israeli (Phonetic)" msgstr "" #: ../../keyboard.pm_.c:151 msgid "Iranian" msgstr "" #: ../../keyboard.pm_.c:152 msgid "Icelandic" msgstr "" #: ../../keyboard.pm_.c:153 msgid "Italian" msgstr "" #: ../../keyboard.pm_.c:154 msgid "Japanese 106 keys" msgstr "" #: ../../keyboard.pm_.c:155 msgid "Latin American" msgstr "" #: ../../keyboard.pm_.c:156 msgid "Dutch" msgstr "" #: ../../keyboard.pm_.c:157 msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm_.c:159 msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../keyboard.pm_.c:160 msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:161 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:163 msgid "Polish (qwerty layout)" msgstr "" #: ../../keyboard.pm_.c:164 msgid "Polish (qwertz layout)" msgstr "" #: ../../keyboard.pm_.c:165 msgid "Portuguese" msgstr "" #: ../../keyboard.pm_.c:166 msgid "Canadian (Quebec)" msgstr "" #: ../../keyboard.pm_.c:168 msgid "Russian (Yawerty)" msgstr "" #: ../../keyboard.pm_.c:169 msgid "Swedish" msgstr "" #: ../../keyboard.pm_.c:170 msgid "Slovenian" msgstr "" #: ../../keyboard.pm_.c:171 msgid "Slovakian" msgstr "" #: ../../keyboard.pm_.c:172 msgid "Thai keyboard" msgstr "" #: ../../keyboard.pm_.c:173 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../keyboard.pm_.c:174 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../keyboard.pm_.c:175 msgid "Ukrainian" msgstr "" #: ../../keyboard.pm_.c:178 msgid "US keyboard (international)" msgstr "" #: ../../keyboard.pm_.c:179 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../keyboard.pm_.c:180 msgid "Yugoslavian (latin layout)" msgstr "" #: ../../mouse.pm_.c:21 msgid "Sun - Mouse" msgstr "" #: ../../mouse.pm_.c:23 msgid "Apple ADB Mouse" msgstr "" #: ../../mouse.pm_.c:24 msgid "Apple ADB Mouse (2 Buttons)" msgstr "" #: ../../mouse.pm_.c:25 msgid "Apple ADB Mouse (3+ Buttons)" msgstr "" #: ../../mouse.pm_.c:26 msgid "Apple USB Mouse" msgstr "" #: ../../mouse.pm_.c:27 msgid "Apple USB Mouse (2 Buttons)" msgstr "" #: ../../mouse.pm_.c:28 msgid "Apple USB Mouse (3+ Buttons)" msgstr "" #: ../../mouse.pm_.c:30 msgid "Generic Mouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:31 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "" #: ../../mouse.pm_.c:32 msgid "Generic 3 Button Mouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:33 msgid "ALPS GlidePoint (PS/2)" msgstr "" #: ../../mouse.pm_.c:34 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "" #: ../../mouse.pm_.c:35 msgid "Kensington Thinking Mouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:36 msgid "ASCII MieMouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:37 msgid "Genius NetMouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:38 msgid "Genius NetMouse Pro (PS/2)" msgstr "" #: ../../mouse.pm_.c:39 msgid "Genius NetScroll (PS/2)" msgstr "" #: ../../mouse.pm_.c:40 msgid "Microsoft IntelliMouse (PS/2)" msgstr "" #: ../../mouse.pm_.c:41 msgid "ATI Bus Mouse" msgstr "" #: ../../mouse.pm_.c:42 msgid "Microsoft Bus Mouse" msgstr "" #: ../../mouse.pm_.c:43 msgid "Logitech Bus Mouse" msgstr "" #: ../../mouse.pm_.c:44 msgid "USB Mouse" msgstr "" #: ../../mouse.pm_.c:45 msgid "USB Mouse (3 buttons or more)" msgstr "" #: ../../mouse.pm_.c:47 msgid "No Mouse" msgstr "" #: ../../mouse.pm_.c:48 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "" #: ../../mouse.pm_.c:49 msgid "Logitech CC Series (serial)" msgstr "" #: ../../mouse.pm_.c:50 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "" #: ../../mouse.pm_.c:51 msgid "ASCII MieMouse (serial)" msgstr "" #: ../../mouse.pm_.c:52 msgid "Genius NetMouse (serial)" msgstr "" #: ../../mouse.pm_.c:53 msgid "Microsoft IntelliMouse (serial)" msgstr "" #: ../../mouse.pm_.c:54 msgid "MM Series (serial)" msgstr "" #: ../../mouse.pm_.c:55 msgid "MM HitTablet (serial)" msgstr "" #: ../../mouse.pm_.c:56 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../mouse.pm_.c:57 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "" #: ../../mouse.pm_.c:58 msgid "Generic Mouse (serial)" msgstr "" #: ../../mouse.pm_.c:59 msgid "Microsoft compatible (serial)" msgstr "" #: ../../mouse.pm_.c:60 msgid "Generic 3 Button Mouse (serial)" msgstr "" #: ../../mouse.pm_.c:61 msgid "Kensington Thinking Mouse (serial)" msgstr "" #: ../../mouse.pm_.c:62 msgid "Mouse Systems (serial)" msgstr "" #: ../../my_gtk.pm_.c:444 msgid "Is this correct?" msgstr "" #: ../../netconnect.pm_.c:83 msgid "Internet configuration" msgstr "" #: ../../netconnect.pm_.c:84 msgid "Do you want to try to connect to the internet now?" msgstr "" #: ../../netconnect.pm_.c:118 ../../netconnect.pm_.c:138 #: ../../netconnect.pm_.c:192 ../../netconnect.pm_.c:212 #: ../../netconnect.pm_.c:224 ../../netconnect.pm_.c:236 msgid "ISDN Configuration" msgstr "" #: ../../netconnect.pm_.c:119 msgid "" "Select your provider.\n" " If it's not in the list, choose Unlisted" msgstr "" #: ../../netconnect.pm_.c:139 msgid "Please fill or check the field below" msgstr "" #: ../../netconnect.pm_.c:141 msgid "Card IRQ" msgstr "" #: ../../netconnect.pm_.c:142 msgid "Card mem (DMA)" msgstr "" #: ../../netconnect.pm_.c:143 msgid "Card IO" msgstr "" #: ../../netconnect.pm_.c:144 msgid "Card IO_0" msgstr "" #: ../../netconnect.pm_.c:145 msgid "Card IO_1" msgstr "" #: ../../netconnect.pm_.c:146 ../../netconnect.pm_.c:519 msgid "Connection name" msgstr "" #: ../../netconnect.pm_.c:147 msgid "Your personnal phone number" msgstr "" #: ../../netconnect.pm_.c:148 msgid "Provider name (ex provider.net)" msgstr "" #: ../../netconnect.pm_.c:149 msgid "Provider phone number" msgstr "" #: ../../netconnect.pm_.c:150 msgid "Provider dns 1" msgstr "" #: ../../netconnect.pm_.c:151 msgid "Provider dns 2" msgstr "" #: ../../netconnect.pm_.c:152 msgid "Dialing mode" msgstr "" #: ../../netconnect.pm_.c:153 msgid "Account Login" msgstr "" #: ../../netconnect.pm_.c:154 msgid "Account Password" msgstr "" #: ../../netconnect.pm_.c:155 msgid "Confirm Password" msgstr "" #: ../../netconnect.pm_.c:185 msgid "Germany (1TR6)" msgstr "" #: ../../netconnect.pm_.c:187 msgid "Europe (EDSS1)" msgstr "" #: ../../netconnect.pm_.c:189 msgid "Rest of the world - no D-Channel (leased lines)" msgstr "" #: ../../netconnect.pm_.c:193 msgid "Which protocol do you want to use ?" msgstr "" #: ../../netconnect.pm_.c:204 msgid "ISA / PCMCIA" msgstr "" #: ../../netconnect.pm_.c:206 msgid "PCI" msgstr "" #: ../../netconnect.pm_.c:208 msgid "I don't know" msgstr "" #: ../../netconnect.pm_.c:213 msgid "What kind of card do you have?" msgstr "" #: ../../netconnect.pm_.c:219 msgid "Continue" msgstr "" #: ../../netconnect.pm_.c:221 msgid "Abort" msgstr "" #: ../../netconnect.pm_.c:225 msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the irq and io of your card.\n" msgstr "" #: ../../netconnect.pm_.c:237 msgid "Which is your ISDN card ?" msgstr "" #: ../../netconnect.pm_.c:274 msgid "I have found an ISDN Card:\n" msgstr "" #: ../../netconnect.pm_.c:282 msgid "" "I have detected an ISDN PCI Card, but I don't know the type. Please select " "one PCI card on the next screen." msgstr "" #: ../../netconnect.pm_.c:289 msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../netconnect.pm_.c:329 msgid "Internet Configuration." msgstr "" #: ../../netconnect.pm_.c:330 msgid "" "I need to configure your network adaptater to be able to connect to internet." msgstr "" #: ../../netconnect.pm_.c:332 ../../netconnect.pm_.c:348 #: ../../standalone/drakgw_.c:198 msgid "Choose the network interface" msgstr "" #: ../../netconnect.pm_.c:333 msgid "" "Please choose which network adaptater do you want to use to connect to " "internet.\n" "If you don't know, choose eth0.\n" msgstr "" #: ../../netconnect.pm_.c:344 ../../netconnect.pm_.c:373 msgid "Network interface" msgstr "" #: ../../netconnect.pm_.c:345 msgid "" "There is only one configured network adapter on your system:\n" "\n" "$interface\n" "\n" "Would you like to setup your internet connection with that adapter?" msgstr "" #: ../../netconnect.pm_.c:349 msgid "" "Please choose which network adaptater do you want to use to connect to " "internet" msgstr "" #: ../../netconnect.pm_.c:374 msgid "I'm about to restart the network interface. Do you agree?" msgstr "" #: ../../netconnect.pm_.c:447 msgid "ADSL configuration" msgstr "" #: ../../netconnect.pm_.c:448 msgid "Do you want to start your connection at boot?" msgstr "" #: ../../netconnect.pm_.c:502 msgid "Try to find a modem?" msgstr "" #: ../../netconnect.pm_.c:512 msgid "Please choose which serial port your modem is connected to." msgstr "" #: ../../netconnect.pm_.c:518 msgid "Dialup options" msgstr "" #: ../../netconnect.pm_.c:520 msgid "Phone number" msgstr "" #: ../../netconnect.pm_.c:521 msgid "Login ID" msgstr "" #: ../../netconnect.pm_.c:523 msgid "Authentication" msgstr "" #: ../../netconnect.pm_.c:523 msgid "CHAP" msgstr "" #: ../../netconnect.pm_.c:523 msgid "PAP" msgstr "" #: ../../netconnect.pm_.c:523 msgid "Script-based" msgstr "" #: ../../netconnect.pm_.c:523 msgid "Terminal-based" msgstr "" #: ../../netconnect.pm_.c:524 msgid "Domain name" msgstr "" #: ../../netconnect.pm_.c:526 msgid "First DNS Server" msgstr "" #: ../../netconnect.pm_.c:527 msgid "Second DNS Server" msgstr "" #: ../../netconnect.pm_.c:545 msgid "Connect to internet" msgstr "" #: ../../netconnect.pm_.c:547 msgid "Disconnect from internet" msgstr "" #: ../../netconnect.pm_.c:549 msgid "Configure internet connexion" msgstr "" #: ../../netconnect.pm_.c:552 msgid "Internet connection & configuration" msgstr "" #: ../../netconnect.pm_.c:553 msgid "What do you wish to do?" msgstr "" #: ../../netconnect.pm_.c:568 msgid "Connect to internet with a normal modem" msgstr "" #: ../../netconnect.pm_.c:570 msgid "Connect to internet using ISDN" msgstr "" #: ../../netconnect.pm_.c:572 msgid "Connect to internet using DSL (or ADSL)" msgstr "" #: ../../netconnect.pm_.c:574 msgid "Connect to internet using Cable" msgstr "" #: ../../netconnect.pm_.c:576 msgid "Configure LAN" msgstr "" #: ../../netconnect.pm_.c:578 msgid "End configuration" msgstr "" #: ../../netconnect.pm_.c:581 msgid "Connect to the Internet / Configure LAN" msgstr "" #: ../../netconnect.pm_.c:582 msgid "How do you want to connect to the Internet?" msgstr "" #: ../../netconnect.pm_.c:603 msgid "Internal ISDN card" msgstr "" #: ../../netconnect.pm_.c:605 msgid "External modem" msgstr "" #: ../../netconnect.pm_.c:608 ../../netconnect.pm_.c:643 #: ../../netconnect.pm_.c:654 ../../netconnect.pm_.c:680 msgid "Connect to the Internet" msgstr "" #: ../../netconnect.pm_.c:609 msgid "What kind is your ISDN connection?" msgstr "" #: ../../netconnect.pm_.c:628 msgid "Cable connection" msgstr "" #: ../../netconnect.pm_.c:629 ../../network.pm_.c:278 msgid "" "Please enter your host name if you know it.\n" "Some DHCP servers require the hostname to work.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''." msgstr "" #: ../../netconnect.pm_.c:633 ../../network.pm_.c:282 ../../network.pm_.c:322 msgid "Host name:" msgstr "" #: ../../netconnect.pm_.c:638 msgid "France" msgstr "" #: ../../netconnect.pm_.c:640 msgid "Other countries" msgstr "" #: ../../netconnect.pm_.c:644 msgid "On which country are you located ?" msgstr "" #: ../../netconnect.pm_.c:649 msgid "alcatel modem" msgstr "" #: ../../netconnect.pm_.c:651 msgid "ECI modem" msgstr "" #: ../../netconnect.pm_.c:655 msgid "If your adsl modem is an alcatel one, choose alcatel. Otherwise, ECI." msgstr "" #: ../../netconnect.pm_.c:675 msgid "use pppoe" msgstr "" #: ../../netconnect.pm_.c:677 msgid "don't use pppoe" msgstr "" #: ../../netconnect.pm_.c:681 msgid "" "The most common way to connect with adsl is dhcp + pppoe.\n" "However, it exists some connexion that only use dhcp. If you don't know, " "choose 'use pppoe'" msgstr "" #: ../../network.pm_.c:242 msgid "Keep the current IP configuration" msgstr "" #: ../../network.pm_.c:243 msgid "Reconfigure network now" msgstr "" #: ../../network.pm_.c:244 msgid "Do not set up networking" msgstr "" #: ../../network.pm_.c:247 ../../network.pm_.c:252 msgid "Network Configuration" msgstr "" #: ../../network.pm_.c:248 msgid "Local networking has already been configured. Do you want to:" msgstr "" #: ../../network.pm_.c:253 msgid "Do you want to configure a local network for your system?" msgstr "" #: ../../network.pm_.c:259 msgid "no network card found" msgstr "" #: ../../network.pm_.c:277 ../../network.pm_.c:317 msgid "Configuring network" msgstr "" #: ../../network.pm_.c:296 msgid "Proxies configuration" msgstr "" #: ../../network.pm_.c:297 msgid "HTTP proxy" msgstr "" #: ../../network.pm_.c:298 msgid "FTP proxy" msgstr "" #: ../../network.pm_.c:304 msgid "Proxy should be http://..." msgstr "" #: ../../network.pm_.c:305 msgid "Proxy should be ftp://..." msgstr "" #: ../../network.pm_.c:318 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../../network.pm_.c:322 msgid "DNS server:" msgstr "" #: ../../network.pm_.c:322 msgid "Gateway device:" msgstr "" #: ../../network.pm_.c:322 msgid "Gateway:" msgstr "" #: ../../network.pm_.c:356 ../../network.pm_.c:357 #, c-format msgid "Configuring network device %s" msgstr "" #: ../../network.pm_.c:358 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../network.pm_.c:361 msgid "Automatic IP" msgstr "" #: ../../network.pm_.c:361 msgid "IP address:" msgstr "" #: ../../network.pm_.c:361 msgid "Netmask:" msgstr "" #: ../../network.pm_.c:362 msgid "(bootp/dhcp)" msgstr "" #: ../../network.pm_.c:368 ../../printerdrake.pm_.c:107 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../partition_table.pm_.c:542 msgid "Extended partition not supported on this platform" msgstr "" #: ../../partition_table.pm_.c:560 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../../partition_table.pm_.c:653 #, c-format msgid "Error reading file %s" msgstr "" #: ../../partition_table.pm_.c:660 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../partition_table.pm_.c:662 msgid "Bad backup file" msgstr "" #: ../../partition_table.pm_.c:683 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../pkgs.pm_.c:20 msgid "mandatory" msgstr "" #: ../../pkgs.pm_.c:21 msgid "must have" msgstr "" #: ../../pkgs.pm_.c:22 msgid "important" msgstr "" #: ../../pkgs.pm_.c:24 msgid "very nice" msgstr "" #: ../../pkgs.pm_.c:25 msgid "nice" msgstr "" #: ../../pkgs.pm_.c:26 ../../pkgs.pm_.c:27 msgid "interesting" msgstr "" #: ../../pkgs.pm_.c:28 ../../pkgs.pm_.c:29 ../../pkgs.pm_.c:30 #: ../../pkgs.pm_.c:31 msgid "maybe" msgstr "" #: ../../pkgs.pm_.c:34 msgid "i18n (important)" msgstr "" #: ../../pkgs.pm_.c:35 msgid "i18n (very nice)" msgstr "" #: ../../pkgs.pm_.c:36 msgid "i18n (nice)" msgstr "" #: ../../placeholder.pm_.c:5 msgid "Show less" msgstr "" #: ../../placeholder.pm_.c:6 msgid "Show more" msgstr "" #: ../../printer.pm_.c:19 msgid "Local printer" msgstr "" #: ../../printer.pm_.c:20 msgid "Remote lpd" msgstr "" #: ../../printer.pm_.c:21 msgid "SMB/Windows 95/98/NT" msgstr "" #: ../../printer.pm_.c:22 msgid "NetWare" msgstr "" #: ../../printer.pm_.c:23 msgid "URI for Local printer" msgstr "" #: ../../printer.pm_.c:24 msgid "URI for Network printer" msgstr "" #: ../../printerdrake.pm_.c:19 msgid "Detecting devices..." msgstr "" #: ../../printerdrake.pm_.c:19 msgid "Test ports" msgstr "" #: ../../printerdrake.pm_.c:35 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" #: ../../printerdrake.pm_.c:45 msgid "Local Printer Device" msgstr "" #: ../../printerdrake.pm_.c:46 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" #: ../../printerdrake.pm_.c:48 msgid "Printer Device" msgstr "" #: ../../printerdrake.pm_.c:67 msgid "Local Printer Device (URI)" msgstr "" #: ../../printerdrake.pm_.c:68 msgid "" "What URI device is your printer connected to\n" "(note that parallel:/dev/lp0 is equivalent to LPT1:)?" msgstr "" #: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:154 msgid "Printer Device URI" msgstr "" #: ../../printerdrake.pm_.c:78 msgid "Remote lpd Printer Options" msgstr "" #: ../../printerdrake.pm_.c:79 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" #: ../../printerdrake.pm_.c:82 msgid "Remote hostname" msgstr "" #: ../../printerdrake.pm_.c:83 msgid "Remote queue" msgstr "" #: ../../printerdrake.pm_.c:93 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printerdrake.pm_.c:94 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../../printerdrake.pm_.c:99 msgid "SMB server host" msgstr "" #: ../../printerdrake.pm_.c:100 msgid "SMB server IP" msgstr "" #: ../../printerdrake.pm_.c:101 msgid "Share name" msgstr "" #: ../../printerdrake.pm_.c:104 msgid "Workgroup" msgstr "" #: ../../printerdrake.pm_.c:129 msgid "NetWare Printer Options" msgstr "" #: ../../printerdrake.pm_.c:130 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../../printerdrake.pm_.c:134 msgid "Printer Server" msgstr "" #: ../../printerdrake.pm_.c:135 msgid "Print Queue Name" msgstr "" #: ../../printerdrake.pm_.c:146 msgid "Network Printer Options (URI)" msgstr "" #: ../../printerdrake.pm_.c:147 msgid "" "Choose the right Device URI for a network printer or a local file. " "Examples:\n" " file:/path/to/filename.prn\n" " http://hostname:631/ipp/port1\n" " ipp://hostname/ipp/port1\n" " lpq://hostname/queue\n" " socket://hostname\n" " socket://hostname:9100" msgstr "" #: ../../printerdrake.pm_.c:175 ../../printerdrake.pm_.c:224 msgid "What type of printer do you have?" msgstr "" #: ../../printerdrake.pm_.c:184 ../../printerdrake.pm_.c:291 msgid "Do you want to test printing?" msgstr "" #: ../../printerdrake.pm_.c:187 ../../printerdrake.pm_.c:302 msgid "Printing test page(s)..." msgstr "" #: ../../printerdrake.pm_.c:194 ../../printerdrake.pm_.c:310 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Printing status:\n" "%s\n" "\n" "Does it work properly?" msgstr "" #: ../../printerdrake.pm_.c:198 ../../printerdrake.pm_.c:314 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" #: ../../printerdrake.pm_.c:214 msgid "Yes, print ASCII test page" msgstr "" #: ../../printerdrake.pm_.c:215 msgid "Yes, print PostScript test page" msgstr "" #: ../../printerdrake.pm_.c:216 msgid "Yes, print both test pages" msgstr "" #: ../../printerdrake.pm_.c:223 msgid "Configure Printer" msgstr "" #: ../../printerdrake.pm_.c:256 msgid "Printer options" msgstr "" #: ../../printerdrake.pm_.c:257 msgid "Paper Size" msgstr "" #: ../../printerdrake.pm_.c:258 msgid "Eject page after job?" msgstr "" #: ../../printerdrake.pm_.c:263 msgid "Uniprint driver options" msgstr "" #: ../../printerdrake.pm_.c:264 msgid "Color depth options" msgstr "" #: ../../printerdrake.pm_.c:266 msgid "Print text as PostScript?" msgstr "" #: ../../printerdrake.pm_.c:267 msgid "Reverse page order" msgstr "" #: ../../printerdrake.pm_.c:269 msgid "Fix stair-stepping text?" msgstr "" #: ../../printerdrake.pm_.c:272 msgid "Number of pages per output pages" msgstr "" #: ../../printerdrake.pm_.c:273 msgid "Right/Left margins in points (1/72 of inch)" msgstr "" #: ../../printerdrake.pm_.c:274 msgid "Top/Bottom margins in points (1/72 of inch)" msgstr "" #: ../../printerdrake.pm_.c:277 msgid "Extra GhostScript options" msgstr "" #: ../../printerdrake.pm_.c:280 msgid "Extra Text options" msgstr "" #: ../../printerdrake.pm_.c:330 msgid "Printer" msgstr "" #: ../../printerdrake.pm_.c:331 msgid "Would you like to configure a printer?" msgstr "" #: ../../printerdrake.pm_.c:334 msgid "" "Here are the following print queues.\n" "You can add some more or change the existing ones." msgstr "" #: ../../printerdrake.pm_.c:362 ../../printerdrake.pm_.c:369 #: ../../printerdrake.pm_.c:381 msgid "Select Printer Connection" msgstr "" #: ../../printerdrake.pm_.c:363 msgid "How is the printer connected?" msgstr "" #: ../../printerdrake.pm_.c:369 ../../printerdrake.pm_.c:381 msgid "Remove queue" msgstr "" #: ../../printerdrake.pm_.c:370 msgid "" "Every printer managed by CUPS need a name (for example lp).\n" "Other parameter like the description of the printer or its location\n" "can be defined. What name should be used for this printer and\n" "how is the printer connected?" msgstr "" #: ../../printerdrake.pm_.c:374 msgid "Name of printer" msgstr "" #: ../../printerdrake.pm_.c:375 msgid "Description" msgstr "" #: ../../printerdrake.pm_.c:376 msgid "Location" msgstr "" #: ../../printerdrake.pm_.c:377 ../../printerdrake.pm_.c:387 msgid "Printer Connection" msgstr "" #: ../../printerdrake.pm_.c:382 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue and how is the printer " "connected?" msgstr "" #: ../../printerdrake.pm_.c:385 msgid "Name of queue" msgstr "" #: ../../printerdrake.pm_.c:386 msgid "Spool directory" msgstr "" #: ../../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../raid.pm_.c:106 msgid "Can't write file $file" msgstr "" #: ../../raid.pm_.c:131 msgid "mkraid failed" msgstr "" #: ../../raid.pm_.c:131 msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../raid.pm_.c:147 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../../services.pm_.c:15 msgid "Anacron a periodic command scheduler." msgstr "" #: ../../services.pm_.c:16 msgid "" "apmd is used for monitoring batery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../services.pm_.c:18 msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../services.pm_.c:20 msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the " "basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../services.pm_.c:23 msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste " "operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../services.pm_.c:26 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files\n" "and CGI." msgstr "" #: ../../services.pm_.c:28 msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for " "starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " "disables\n" "all of the services it is responsible for." msgstr "" #: ../../services.pm_.c:32 msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../services.pm_.c:35 msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../services.pm_.c:37 msgid "" "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n" "host names to IP addresses." msgstr "" #: ../../services.pm_.c:39 msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../services.pm_.c:41 msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../services.pm_.c:43 msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../services.pm_.c:46 msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../services.pm_.c:48 msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to " "have\n" "it installed on machines that don't need it." msgstr "" #: ../../services.pm_.c:51 msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on " "machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../services.pm_.c:54 msgid "" "Postfix is a Mail Transport Agent, which is the program that\n" "moves mail from one machine to another." msgstr "" #: ../../services.pm_.c:56 msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../../services.pm_.c:58 msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../services.pm_.c:61 msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../services.pm_.c:63 msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../services.pm_.c:65 msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../services.pm_.c:67 msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../services.pm_.c:69 msgid "This startup script try to load your modules for your usb mouse." msgstr "" #: ../../services.pm_.c:70 msgid "Starts and stops the X Font Server at boot time and shutdown." msgstr "" #: ../../services.pm_.c:96 msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../standalone/diskdrake_.c:61 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../../standalone/drakboot_.c:25 msgid "Configure LILO/GRUB" msgstr "" #: ../../standalone/drakboot_.c:26 msgid "Create a boot floppy" msgstr "" #: ../../standalone/drakboot_.c:28 msgid "Format floppy" msgstr "" #: ../../standalone/drakboot_.c:40 msgid "Choice" msgstr "" #: ../../standalone/drakboot_.c:59 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../../standalone/drakgw_.c:86 msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../standalone/drakgw_.c:87 ../../standalone/drakgw_.c:105 msgid "The setup of Internet connection sharing has already been done.\n" msgstr "" #: ../../standalone/drakgw_.c:104 msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../standalone/drakgw_.c:122 msgid "Config file content could not be interpreted." msgstr "" #: ../../standalone/drakgw_.c:132 msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/drakgw_.c:133 msgid "" "Your computer can be configured to share its Internet connection.\n" "\n" msgstr "" #: ../../standalone/drakgw_.c:186 msgid "No network adapter on your system!" msgstr "" #: ../../standalone/drakgw_.c:187 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "" #: ../../standalone/drakgw_.c:199 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "" #: ../../standalone/drakgw_.c:208 msgid "" "Warning, the network adapter is already configured.\n" "Would you like to reconfigure?" msgstr "" #: ../../standalone/drakgw_.c:233 msgid "Potential LAN address conflict found in current config of $_!\n" msgstr "" #: ../../standalone/drakgw_.c:243 msgid "Firewalling configuration detected!" msgstr "" #: ../../standalone/drakgw_.c:244 msgid "" "Warning! An existing firewalling configuration has been detected. You may " "need some manual fix after installation. Proceed?" msgstr "" #: ../../standalone/drakgw_.c:258 msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../standalone/drakgw_.c:282 msgid "Could not install ipchains RPM with urpmi." msgstr "" #: ../../standalone/drakgw_.c:432 msgid "Could not install dhcp RPM with urpmi." msgstr "" #: ../../standalone/drakgw_.c:456 msgid "Could not install linuxconf RPM with urpmi." msgstr "" #: ../../standalone/drakgw_.c:472 msgid "Could not install bind RPM with urpmi." msgstr "" #: ../../standalone/drakgw_.c:476 msgid "Could not install caching-nameserver RPM with urpmi." msgstr "" #: ../../standalone/drakgw_.c:488 msgid "Congratulations!" msgstr "" #: ../../standalone/drakgw_.c:489 msgid "Everything has been configured.\n" msgstr "" #: ../../standalone/draksec_.c:28 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../standalone/draksec_.c:31 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" #: ../../standalone/draksec_.c:32 msgid "" "Few improvements for this security level, the main one is that there are\n" "more security warnings and checks." msgstr "" #: ../../standalone/draksec_.c:34 msgid "" "This is the standard security recommended for a computer that will be used\n" "to connect to the Internet as a client. There are now security checks. " msgstr "" #: ../../standalone/draksec_.c:36 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which accept\n" "connections from many clients. " msgstr "" #: ../../standalone/draksec_.c:39 msgid "" "We take level 4 features, but now the system is entirely closed.\n" "Security features are at their maximum." msgstr "" #: ../../standalone/draksec_.c:49 msgid "Setting security level" msgstr "" #: ../../standalone/drakxconf_.c:21 msgid "Choose the tool you want to use" msgstr "" #: ../../standalone/mousedrake_.c:25 msgid "What is the type of your mouse?" msgstr "" #: ../../standalone/mousedrake_.c:30 msgid "no serial_usb found\n" msgstr "" #: ../../standalone/mousedrake_.c:35 msgid "Emulate third button?" msgstr "" #: ../../standalone/mousedrake_.c:39 msgid "Which serial port is your mouse connected to?" msgstr "" #: ../../standalone/rpmdrake_.c:25 msgid "reading configuration" msgstr "" #: ../../standalone/rpmdrake_.c:45 ../../standalone/rpmdrake_.c:50 #: ../../standalone/rpmdrake_.c:253 msgid "File" msgstr "" #: ../../standalone/rpmdrake_.c:48 ../../standalone/rpmdrake_.c:229 #: ../../standalone/rpmdrake_.c:253 ../../standalone/rpmdrake_.c:269 msgid "Search" msgstr "" #: ../../standalone/rpmdrake_.c:49 ../../standalone/rpmdrake_.c:56 msgid "Package" msgstr "" #: ../../standalone/rpmdrake_.c:51 msgid "Text" msgstr "" #: ../../standalone/rpmdrake_.c:53 msgid "Tree" msgstr "" #: ../../standalone/rpmdrake_.c:54 msgid "Sort by" msgstr "" #: ../../standalone/rpmdrake_.c:55 msgid "Category" msgstr "" #: ../../standalone/rpmdrake_.c:58 msgid "See" msgstr "" #: ../../standalone/rpmdrake_.c:59 ../../standalone/rpmdrake_.c:163 msgid "Installed packages" msgstr "" #: ../../standalone/rpmdrake_.c:60 msgid "Available packages" msgstr "" #: ../../standalone/rpmdrake_.c:62 msgid "Show only leaves" msgstr "" #: ../../standalone/rpmdrake_.c:67 msgid "Expand all" msgstr "" #: ../../standalone/rpmdrake_.c:68 msgid "Collapse all" msgstr "" #: ../../standalone/rpmdrake_.c:70 msgid "Configuration" msgstr "" #: ../../standalone/rpmdrake_.c:71 msgid "Add location of packages" msgstr "" #: ../../standalone/rpmdrake_.c:75 msgid "Update location" msgstr "" #: ../../standalone/rpmdrake_.c:79 ../../standalone/rpmdrake_.c:328 msgid "Remove" msgstr "" #: ../../standalone/rpmdrake_.c:100 msgid "Configuration: Add Location" msgstr "" #: ../../standalone/rpmdrake_.c:103 msgid "Find Package" msgstr "" #: ../../standalone/rpmdrake_.c:104 msgid "Find Package containing file" msgstr "" #: ../../standalone/rpmdrake_.c:105 msgid "Toggle between Installed and Available" msgstr "" #: ../../standalone/rpmdrake_.c:139 msgid "Files:\n" msgstr "" #: ../../standalone/rpmdrake_.c:161 ../../standalone/rpmdrake_.c:209 msgid "Uninstall" msgstr "" #: ../../standalone/rpmdrake_.c:163 msgid "Choose package to install" msgstr "" #: ../../standalone/rpmdrake_.c:190 msgid "Checking dependencies" msgstr "" #: ../../standalone/rpmdrake_.c:190 ../../standalone/rpmdrake_.c:409 msgid "Wait" msgstr "" #: ../../standalone/rpmdrake_.c:209 msgid "The following packages are going to be uninstalled" msgstr "" #: ../../standalone/rpmdrake_.c:210 msgid "Uninstalling the RPMs" msgstr "" #: ../../standalone/rpmdrake_.c:229 ../../standalone/rpmdrake_.c:269 msgid "Regexp" msgstr "" #: ../../standalone/rpmdrake_.c:229 msgid "Which package are looking for" msgstr "" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 #, c-format msgid "%s not found" msgstr "" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No match" msgstr "" #: ../../standalone/rpmdrake_.c:238 ../../standalone/rpmdrake_.c:262 #: ../../standalone/rpmdrake_.c:278 msgid "No more match" msgstr "" #: ../../standalone/rpmdrake_.c:246 msgid "" "rpmdrake is currently in ``low memory'' mode.\n" "I'm going to relaunch rpmdrake to allow searching files" msgstr "" #: ../../standalone/rpmdrake_.c:253 msgid "Which file are you looking for?" msgstr "" #: ../../standalone/rpmdrake_.c:269 msgid "What are looking for?" msgstr "" #: ../../standalone/rpmdrake_.c:289 msgid "Give a name (eg: `extra', `commercial')" msgstr "" #: ../../standalone/rpmdrake_.c:291 msgid "Directory" msgstr "" #: ../../standalone/rpmdrake_.c:294 msgid "No cdrom available (nothing in /mnt/cdrom)" msgstr "" #: ../../standalone/rpmdrake_.c:298 msgid "URL of the directory containing the RPMs" msgstr "" #: ../../standalone/rpmdrake_.c:299 msgid "" "For FTP and HTTP, you need to give the location for hdlist\n" "It must be relative to the URL above" msgstr "" #: ../../standalone/rpmdrake_.c:302 msgid "Please submit the following information" msgstr "" #: ../../standalone/rpmdrake_.c:304 #, c-format msgid "%s is already in use" msgstr "" #: ../../standalone/rpmdrake_.c:315 ../../standalone/rpmdrake_.c:321 #: ../../standalone/rpmdrake_.c:329 msgid "Updating the RPMs base" msgstr "" #: ../../standalone/rpmdrake_.c:328 #, c-format msgid "Going to remove entry %s" msgstr "" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves" msgstr "" #: ../../standalone/rpmdrake_.c:360 msgid "Finding leaves takes some time" msgstr ""