# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2003-12-03 03:09+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Scanning partitions to find mount points" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of suid root files." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n" "" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Configuration changed - restart clusternfs/dhcpd?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "\t\tErase=%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Differential backups only save files that have changed or are new since the original 'base' backup." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "network printer port" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Please insert floppy disk:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "DrakTermServ" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "PCMCIA" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Which username" msgstr "" #: ../../any.pm:1 #, c-format msgid "Which type of entry do you want to add?" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Restore partition table" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure hostname..." msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "On CUPS server \"%s\"" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Post-install configuration" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "The current security level is %s\n" "Select permissions to see/edit" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Type" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sri Lanka" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Central African Republic" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway device" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Advanced preferences" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Net Method:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Ethernetcard" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "If set, send the mail report to this email address else send it to root" msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Parameters" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "no" msgstr "" #: ../../harddrake/v4l.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Auto-detect" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "Interface:" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Select installation class" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "" "The system doesn't seem to be connected to the Internet.\n" "Try to reconfigure your connection." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n" "\n" "Do you really want to continue setting up this printer as you are doing now?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Belarus" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Error writing to file %s" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result to syslog" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "apmd is used for monitoring battery status and logging it via syslog.\n" "It can also be used for shutting down the machine when the battery is low." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tape to backup" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be installed" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS configuration" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Total progress" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Not enough free space to allocate new partitions" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via %s:\n" "\n" "" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "yes" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "(" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Welcome to The Network Configuration Wizard.\n" "\n" "We are about to configure your internet/network connection.\n" "If you don't want to use the auto detection, deselect the checkbox.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 #, c-format msgid ")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lebanon" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MM HitTablet" msgstr "" #: ../../services.pm:1 #, c-format msgid "Stop" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Edit selected host" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD device defined!" msgstr "" #: ../../network/shorewall.pm:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet. \n" " \n" "Examples:\n" " ppp+ for modem or DSL connections, \n" " eth0, or eth1 for cable connection, \n" " ippp+ for a isdn connection.\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tUse .backupignore files\n" "" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (phonetic)" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP start ip" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "256 kB" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Don't rewind tape after backup" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Bootloader main options" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]" msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Tape" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Malaysia" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning network..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "The change is done, do you want to restart the dm service ?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (French layout)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "mkraid failed (maybe raidtools are missing?)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "August" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "FTP server" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Webcam" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "size of the (second level) cpu cache" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Soundcard" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Month" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Search for files to restore" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Luxembourg" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s \".\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Level %s\n" "" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Syriac (phonetic)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iran" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iraq" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "connecting to %s ..." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Potential LAN address conflict found in current config of %s!\n" "" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring..." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed." msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Password (again)" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search installed fonts" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Default desktop" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click on the button report.\n" "This will open a web browser window on %s\n" " where you'll find a form to fill in. The information displayed above will be \n" "transferred to that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Venezuela" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "IP address" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Choose the sizes" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data corrupted:\n" "\n" "" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Can only be mounted explicitly (i.e.,\n" "the -a option will not cause the file system to be mounted)." msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "" "Your modem isn't supported by the system.\n" "Take a look at http://www.linmodems.org" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose another partition" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Current user" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Username" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left \"Windows\" key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guyana" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Server Configuration" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Used for directory:\n" " only owner of directory or file in this directory can delete it" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Printer Name" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Setting up USB key" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Remove a module" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "Password" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Advanced Configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Scanning on your HP multi-function device" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Root" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing RAID to add to" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo message not found" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Automatic regeneration of kernel header in /boot for\n" "/usr/include/linux/{autoconf,version}.h" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "if needed" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "" "We need to install ntp package\n" " to enable Network Time Protocol" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Failed..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Store the password for this system in drakbackup configuration." msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you explicitly \n" "accept and fully agree to conform to the terms and conditions of this License. \n" "If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n" "with the terms and conditions of this License is void and will terminate your rights under this \n" "License. Upon termination of the License, you must immediately destroy all copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever (including without \n" "limitation damages for loss of business, interruption of business, financial loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential loss) arising out \n" "of the possession and use of software components or arising out of downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or entities. Most \n" "of these components are governed under the terms and conditions of the GNU General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n" "and conditions of the license agreement for each component before using any component. Any question \n" "on a component license should be addressed to the component author and not to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their respective authors and are \n" "protected by intellectual property and copyright laws applicable to software programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n" "portion is excluded from this contract. You remain bound by the other applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of France.\n" "All disputes on the terms of this license will preferably be settled out of court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" "" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Default user" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar x coordinate\n" "of its upper left corner" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Current interface configuration" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD - Line Printer Daemon" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "\n" "If you have an ISA card, the values on the next screen should be right.\n" "\n" "If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not print any test page" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gurmukhi" msgstr "" #: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 #, c-format msgid "" "%s already in use\n" "" msgstr "" #: ../../any.pm:1 #, c-format msgid "Force No APIC" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[keyboard]" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "FTP proxy" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Install List" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Change\n" "Restore Path" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Show only for the selected day" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tLimit disk usage to %s MB\n" "" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "512 kB" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "(Note: Parallel ports cannot be auto-detected)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "N" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind of card do you have?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "O" msgstr "" #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Security" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n" "If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n" "" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Q" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Unable to find backups to restore...\n" "" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Unknown" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This server is already in the list, it cannot be added again.\n" "" msgstr "" #: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Network Configuration" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "S" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "Protocol for the rest of the world\n" "No D-Channel (leased lines)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - /etc/xinetd.d/tftp:\n" " \tdrakTermServ will configure this file to work in conjunction with the images created\n" " \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n" " \teach diskless client.\n" "\n" " \tA typical tftp configuration file looks like:\n" " \t\t\n" " \tservice tftp\n" "\t\t\t{\n" " disable = no\n" " socket_type = dgram\n" " protocol = udp\n" " wait = yes\n" " user = root\n" " server = /usr/sbin/in.tftpd\n" " server_args = -s /var/lib/tftpboot\n" " \t}\n" " \t\t\n" " \tThe changes here from the default installation are changing the disable flag to\n" " \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n" " \tputs its images." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be a number!" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/draksplash:1 ../../standalone/draksplash:1 ../../standalone/draksplash:1 #, c-format msgid "Notice" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You have not configured X. Are you sure you really want this?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "What type of partitioning?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "file list sent by FTP: %s\n" " " msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Interface" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Multisession CD" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated strings" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines from which the scanners should be used:" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Messages" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "POP and IMAP Server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mexico" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model stepping" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Rwanda" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Switzerland" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Brunei Darussalam" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have any %s interfaces?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "You must be root to read configuration file. \n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote lpd Printer Options" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux is a multi-user system, meaning each user may have their own\n" "preferences, their own files and so on. You can read the ``Starter Guide''\n" "to learn more about multi-user systems. But unlike \"root\", who is the\n" "system administrator, the users you add at this point will not be\n" "authorized to change anything except their own files and their own\n" "configurations, protecting the system from unintentional or malicious\n" "changes that impact on the system as a whole. You will have to create at\n" "least one regular user for yourself -- this is the account which you should\n" "use for routine, day-to-day use. Although it is very easy to log in as\n" "\"root\" to do anything and everything, it may also be very dangerous! A\n" "very simple mistake could mean that your system will not work any more. If\n" "you make a serious mistake as a regular user, the worst that will happen is\n" "that you will lose some information, but not affect the entire system.\n" "\n" "The first field asks you for a real name. Of course, this is not mandatory\n" "-- you can actually enter whatever you like. DrakX will use the first word\n" "you typed in this field and copy it to the \"%s\" field, which is the name\n" "this user will enter to log onto the system. If you like, you may override\n" "the default and change the username. The next step is to enter a password.\n" "From a security point of view, a non-privileged (regular) user password is\n" "not as crucial as the \"root\" password, but that is no reason to neglect\n" "it by making it blank or too simple: after all, your files could be the\n" "ones at risk.\n" "\n" "Once you click on \"%s\", you can add other users. Add a user for each one\n" "of your friends: your father or your sister, for example. Click \"%s\" when\n" "you have finished adding users.\n" "\n" "Clicking the \"%s\" button allows you to change the default \"shell\" for\n" "that user (bash by default).\n" "\n" "When you have finished adding users, you will be asked to choose a user\n" "that can automatically log into the system when the computer boots up. If\n" "you are interested in that feature (and do not care much about local\n" "security), choose the desired user and window manager, then click \"%s\".\n" "If you are not interested in this feature, uncheck the \"%s\" box." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Internet Access..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the time interval between each backup" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Norway" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Delete profile" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Danish" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Automatically switch on numlock key locker under console\n" "and XFree at boot." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM so it will eject\n" "the current CD and ask you to insert the correct CD as required." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "When checked, owner and group won't be changed" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bulgaria" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Tuesday" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Processors" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Svalbard and Jan Mayen Islands" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No NIC selected!" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Problems occured during configuration.\n" "Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Other files..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Congo (Kinshasa)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server IP" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing HPOJ package..." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to install\n" "LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used with\n" "the Mandrake rescue image, making it much easier to recover from severe system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Daemon Report\n" "" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latvian" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "monthly" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Retry" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Module name" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Start at boot" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental Backups" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "First sector of drive (MBR)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "El Salvador" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Joystick" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "DVD" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Use Unicode by default" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the module of the GNU/Linux kernel that handles the device" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Is your hardware clock set to GMT?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Trying to rescue partition table" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s must be an integer number!" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Use password to authenticate users" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Entries you'll have to fill:\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "For backups to other media, files are still created on the hard drive, then moved to the other media. Enabling this option will remove the hard drive tar files after the backup." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "" "Unable to start live upgrade !!!\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Name: " msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "up" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "16 million colors (24 bits)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Allow all users" msgstr "" #: ../advertising/08-store.pl:1 #, c-format msgid "The official MandrakeSoft Store" msgstr "" #: ../../install_interactive.pm:1 ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resizing" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter the maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Cable connection" msgstr "" #: ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/logdrake:1 #, c-format msgid "User" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do new backup before restore (only for incremental backups.)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "mkraid failed" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Name" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 3 Emulation" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of sgid files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Israeli (Phonetic)" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to rpm tools" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must choose/enter a printer/device!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission problem accessing CD." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Phone number" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Error: The \"%s\" driver for your sound card is unlisted" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer name, description, location" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (broadcast)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Use Xinerama extension" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "West Europe" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "On CD-R" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS] [PROGRAM_NAME]\n" "\n" "OPTIONS:\n" " --help - print this help message.\n" " --report - program should be one of mandrake tools\n" " --incident - program should be one of mandrake tools" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake2 version %s" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Preferences" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Swaziland" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Dominican Republic" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Copying %s" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Choose color" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Syriac" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-UID" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on this partition\n" "will be lost and will not be recoverable!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "Generic 2 Button Mouse" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to execute the file" msgstr "" #: ../../lvm.pm:1 #, c-format msgid "" "Remove the logical volumes first\n" "" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet access" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "y coordinate of text box\n" "in number of characters" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "To get a list of the options available for the current printer click on the \"Print option list\" button." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Enabling servers..." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printing test page(s)..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Transfer successful\n" "You may want to verify you can login to the server with:\n" "\n" "ssh -i %s %s@%s\n" "\n" "without being prompted for a password." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "There is already a partition with mount point %s\n" "" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable msec hourly security check." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to decide where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space you will\n" "have to partition the drive. Basically, partitioning a hard drive consists\n" "of logically dividing it to create the space needed to install your new\n" "Mandrake Linux system.\n" "\n" "Because the process of partitioning a hard drive is usually irreversible\n" "and can lead to lost data if there is an existing operating system already\n" "installed on the drive, partitioning can be intimidating and stressful if\n" "you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" "simplifies this process. Before continuing with this step, read through the\n" "rest of this section and above all, take your time.\n" "\n" "Depending on your hard drive configuration, several options are available:\n" "\n" " * \"%s\": this option will perform an automatic partitioning of your blank\n" "drive(s). If you use this option there will be no further prompts.\n" "\n" " * \"%s\": the wizard has detected one or more existing Linux partitions on\n" "your hard drive. If you want to use them, choose this option. You will then\n" "be asked to choose the mount points associated with each of the partitions.\n" "The legacy mount points are selected by default, and for the most part it's\n" "a good idea to keep them.\n" "\n" " * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" "all the space available on it, you will have to create free space for\n" "Linux. To do so, you can delete your Microsoft Windows partition and data\n" "(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" "partition. Resizing can be performed without the loss of any data, provided\n" "you have previously defragmented the Windows partition and that it uses the\n" "FAT format. Backing up your data is strongly recommended.. Using this\n" "option is recommended if you want to use both Mandrake Linux and Microsoft\n" "Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "then when you started. You will have less free space under Microsoft\n" "Windows to store your data or to install new software.\n" "\n" " * \"%s\": if you want to delete all data and all partitions present on\n" "your hard drive and replace them with your new Mandrake Linux system,\n" "choose this option. Be careful, because you will not be able to undo your\n" "choice after you confirm.\n" "\n" " !! If you choose this option, all data on your disk will be deleted. !!\n" "\n" " * \"%s\": this will simply erase everything on the drive and begin fresh,\n" "partitioning everything from scratch. All data on your disk will be lost.\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"%s\": choose this option if you want to manually partition your hard\n" "drive. Be careful -- it is a powerful but dangerous choice and you can very\n" "easily lose all your data. That's why this option is really only\n" "recommended if you have done something like this before and have some\n" "experience. For more instructions on how to use the DiskDrake utility,\n" "refer to the ``Managing Your Partitions '' section in the ``Starter\n" "Guide''." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ukraine" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Application:" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "External ISDN modem" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result by mail." msgstr "" #: ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Trouble shooting" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "Printing status:\n" "%s\n" "\n" "" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "daily" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and one unknown printer" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Ireland" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Restore Configuration " msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Is this the correct setting?" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "You will now set up your Internet/network connection. If you wish to\n" "connect your computer to the Internet or to a local network, click \"%s\".\n" "Mandrake Linux will attempt to autodetect network devices and modems. If\n" "this detection fails, uncheck the \"%s\" box. You may also choose not to\n" "configure the network, or to do it later, in which case clicking the \"%s\"\n" "button will take you to the next step.\n" "\n" "When configuring your network, the available connections options are:\n" "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" "simple LAN connection (Ethernet).\n" "\n" "We will not detail each configuration option - just make sure that you have\n" "all the parameters, such as IP address, default gateway, DNS servers, etc.\n" "from your Internet Service Provider or system administrator.\n" "\n" "You can consult the ``Starter Guide'' chapter about Internet connections\n" "for details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wizard Configuration" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Autoprobe" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "if set to yes, check for :\n" "\n" "- empty passwords,\n" "\n" "- no password in /etc/shadow\n" "\n" "- for users with the 0 id other than root." msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Backup system files..." msgstr "" #: ../../any.pm:1 #, c-format msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer \"%s\"..." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Shell history size" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "drakfloppy" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the auto_install.cfg file is located.\n" "\n" "Leave it blank if you do not want to set up automatic installation mode.\n" "\n" "" msgstr "" #: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on other machines" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "information level that can be obtained through the cpuid instruction" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Peru" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " on device: %s" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Remove Windows(TM)" msgstr "" #: ../../services.pm:1 #, c-format msgid "Starts the X Font Server (this is mandatory for XFree to run)." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Most of these values were extracted\n" "from your running system.\n" "You can modify as needed." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Select the font file or directory and click on 'Add'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Madagascar" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Urpmi" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Cron not available yet as non-root" msgstr "" #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "System" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Do you want to use this feature?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Arabic" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Options:\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Password required" msgstr "" #: ../../common.pm:1 #, c-format msgid "%d minutes" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Graphics card: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV transfer failed!" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "XFree configuration" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Choose action" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Polynesia" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Usually, DrakX has no problems detecting the number of buttons on your\n" "mouse. If it does, it assumes you have a two-button mouse and will\n" "configure it for third-button emulation. The third-button mouse button of a\n" "two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" "right mouse buttons. DrakX will automatically know whether your mouse uses\n" "a PS/2, serial or USB interface.\n" "\n" "If for some reason you wish to specify a different type of mouse, select it\n" "from the list provided.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct and that the mouse is working correctly. If the mouse is not\n" "working well, press the space bar or [Return] key to cancel the test and to\n" "go back to the list of choices.\n" "\n" "Wheel mice are occasionally not detected automatically, so you will need to\n" "select your mouse from a list. Be sure to select the one corresponding to\n" "the port that your mouse is attached to. After selecting a mouse and\n" "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" "the mouse wheel to ensure that it is activated correctly. Once you see the\n" "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" "buttons and check that the mouse pointer moves on-screen as you move your\n" "mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "Support the OKI 4w and compatible winprinters." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" msgstr "" #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../modules/interactive.pm:1 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Enable Server" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ukrainian" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to write the file" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Local network(s)" msgstr "" #: ../../help.pm:1 #, c-format msgid "Remove Windows" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "Your %s has been configured.\n" "You may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Firewire controllers" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "After you have configured the general bootloader parameters, the list of\n" "boot options that will be available at boot time will be displayed.\n" "\n" "If there are other operating systems installed on your machine they will\n" "automatically be added to the boot menu. You can fine-tune the existing\n" "options by clicking \"%s\" to create a new entry; selecting an entry and\n" "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" "changes.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone who goes to the console and reboots the machine. You can delete the\n" "corresponding entries for the operating systems to remove them from the\n" "bootloader menu, but you will need a boot disk in order to boot those other\n" "operating systems!" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "System mode" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Netmask:" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Do it later" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Append" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "When this option is turned on, on every startup of CUPS it is automatically made sure that\n" "\n" "- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" "\n" "- if /etc/cups/cupsd.conf is missing, it will be created\n" "\n" "- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n" "\n" "If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Please choose what network adapter will be connected to your Local Area Network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "OK to restore the other files." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your keyboard layout." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Device URI" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not erasable media!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Terminal-based" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable IP spoofing protection." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing a printing system in the %s security level" msgstr "" #: ../../any.pm:1 #, c-format msgid "The user name is too long" msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (windows...)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WebDAV remote site already in sync!" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer database..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Generate auto install floppy" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t\t user name: %s\n" "\t\t on path: %s \n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Somalia" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No open source driver" msgstr "" #: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Def." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nicaragua" msgstr "" #: ../../lang.pm:1 #, c-format msgid "New Caledonia" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol (EDSS1)" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Delete" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Video mode" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Oman" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Please enter your email address below " msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "Network Monitoring" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "SunOS" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "New size in MB: " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition table type: %s\n" "" msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication Windows Domain" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "US keyboard" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Buttons emulation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", network printer \"%s\", port %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via tape:\n" "\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by FTP.\n" "" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Sending Speed:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The classic bug sound tester is to run the following commands:\n" "\n" "\n" "- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" "by default\n" "\n" "- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" "currently uses\n" "\n" "- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" "loaded or not\n" "\n" "- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" "tell you if sound and alsa services're configured to be run on\n" "initlevel 3\n" "\n" "- \"aumix -q\" will tell you if the sound volume is muted or not\n" "\n" "- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" "" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Halt bug" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Mail alert configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tokelau" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Matching" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bosnian" msgstr "" #: ../../standalone/drakbug:1 ../../standalone/drakbug:1 #, c-format msgid "Release: " msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection speed" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Namibia" msgstr "" #: ../../services.pm:1 #, c-format msgid "Database Server" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "special capacities of the driver (burning ability and or DVD support)" msgstr "" #: ../../raid.pm:1 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Network Time Protocol" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security options..." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Launch the graphical environment when your system starts" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "hourly" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Shift key" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Successfuly Restored on %s " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Making printer port available for CUPS..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antigua and Barbuda" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "!!! Indicates the password in the system database is different than\n" " the one in the Terminal Server database.\n" "Delete/re-add the user to the Terminal Server to enable login." msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Spanish" msgstr "" #: ../../services.pm:1 #, c-format msgid "Start" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Direct root login" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring applications..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Normal modem connection" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "File Selection" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 #, c-format msgid "CUPS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase tape before backup" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Run config tool" msgstr "" #: ../../any.pm:1 #, c-format msgid "Bootloader installation" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Root partition size in MB: " msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "This is a mandatory package, it can't be unselected" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create etherboot floppies/CDs:\n" " \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n" " \tor CD to initate the boot sequence. drakTermServ will help generate these\n" " \timages, based on the NIC in the client machine.\n" " \t\t\n" " \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n" " \t\t\n" " \tcat /usr/lib/etherboot/boot1a.bin \\\n" " \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot ISO image is %s" msgstr "" #: ../../services.pm:1 #, c-format msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Lucia" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "November" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Disconnect..." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Report" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Palau" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "level" msgstr "" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "All incidents will be followed up by a single qualified MandrakeSoft technical expert." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Package Group Selection" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Allow local hardware\n" "configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network Protocol: %s" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "You can configure each parameter of the module here." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Choose the resolution and the color depth" msgstr "" #: ../../standalone/mousedrake:1 #, c-format msgid "Emulate third button?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount" msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakautoinst:1 #, c-format msgid "Creating auto install floppy" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install updates" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text box height" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "State" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Be sure a media is present for the device %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable multiple profiles" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Do not interpret character or block special devices on the file system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "These options can backup and restore all files in your /etc directory.\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Local printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Files Restored..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Package selection" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mauritania" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.\n" "\n" "The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.\n" "\t\t \n" "Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.\n" "\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All primary partitions are used" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems." msgstr "" #: ../../services.pm:1 #, c-format msgid "Automatic detection and configuration of hardware at boot." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation Server Configuration" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring IDE" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Network functionality not configured" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Configure module" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cocos (Keeling) Islands" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider phone number" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Host %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Fiji" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Armenia" msgstr "" #: ../../any.pm:1 #, c-format msgid "Second floppy drive" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "About Harddrake" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize TCP connections to X Window" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Drive capacity" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Size: %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Control and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "secondary" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "View Backup Configuration." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report check result to syslog." msgstr "" #. -PO: keep this short or else the buttons will not fit in the window #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "No password" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nigeria" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires hostname...\n" "" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no existing partition to use" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanners\n" "\n" "%s\n" "are available on your system.\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on parallel port #%s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hard drive information" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Russian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Jordan" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Hide files" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to this machine" msgstr "" #: ../../any.pm:1 #, c-format msgid "Sorry, no floppy drive available" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bolivia" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" "\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Bad package" msgstr "" #: ../advertising/07-server.pl:1 #, c-format msgid "Transform your computer into a powerful Linux server: Web server, mail, firewall, router, file and print server (etc.) are just a few clicks away!" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "DrakSec Basic Options" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "\n" "\n" "\n" "Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program. Just type \"sndconfig\" in a console." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Romania" msgstr "" #: ../../standalone/drakperm:1 ../../standalone/drakperm:1 #, c-format msgid "Group" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Canada" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "choose device" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from LVM" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Timezone" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "German" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Next ->" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "Chances are, this partition is\n" "a Driver partition. You should\n" "probably leave it alone.\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guinea-Bissau" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Horizontal refresh rate" msgstr "" #: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Edit" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "USB controllers" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "What norm is your TV using?" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Type:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Share name" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "enable" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "A problem occured while restarting the network: \n" "\n" "%s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove the loopback file?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Selected size is larger than available space" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP server name missing!" msgstr "" #: ../../any.pm:1 #, c-format msgid "Please choose your country." msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup files..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Laotian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Samoa" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rstat protocol allows users on a network to retrieve\n" "performance metrics for any machine on that network." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Re-generating list of configured scanners ..." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Module configuration" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Scanner" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Warning: testing this graphic card may freeze your computer" msgstr "" #: ../../any.pm:1 #, c-format msgid "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Menudrake" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Welcome To Crackers" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Module options:" msgstr "" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Secure your networks with the Multi Network Firewall" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Go on without configuring the network" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Abort" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No password prompt on %s at port %s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse with Wheel emulation" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Usage of remote scanners" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Norwegian)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hard Disk Backup Progress..." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 #, c-format msgid "Unable to fork: %s" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Type: " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Edit Client" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "no fonts found" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 #, c-format msgid "Mouse" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "not enough room in /boot" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "trying to promote %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liechtenstein" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Host name" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the color of the progress bar" msgstr "" #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "Suppress Fonts Files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to RAID" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "You can add additional entries in yaboot for other operating systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is the name you will have to type at the yaboot prompt to\n" "select this boot option.\n" "\n" " * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" "variation of vmlinux with an extension.\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation.\n" "\n" " * Append: on Apple hardware, the kernel append option is often used to\n" "assist in initializing video hardware, or to enable keyboard mouse button\n" "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" "The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation.\n" "\n" " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" "need to allocate a large ramdisk, this option can be used to specify a\n" "ramdisk larger than the default.\n" "\n" " * Read-write: normally the \"root\" partition is initially mounted as\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "You can override the default with this option.\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support.\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" "highlighted with a ``*'' if you press [Tab] to see the boot selections." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No floppy drive available!" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n" "\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saudi Arabia" msgstr "" #: ../../services.pm:1 #, c-format msgid "Internet" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Continue anyway?" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one." msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "" "Some devices were added:\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Geometry: %s cylinders, %s heads, %s sectors\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing on the printer \"%s\"" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Tape" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "" "To submit a bug report, click the report button, which will open your default browser\n" "to Anthill where you will be able to upload the above information as a bug report." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the profile to configure" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Password minimum length and number of digits and upcase letters" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "" "\n" "\n" "Enter a Zeroconf host name without any dot if you don't\n" "want to use the default host name." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now from configuration file" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Mount points should contain only alphanumerical characters" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting printing system..." msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "You can only run with no CDROM support" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "See hardware info" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Day" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of boot partition" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ - Print, Don't Queue" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]...\n" "Mandrake Terminal Server Configurator\n" "--enable : enable MTS\n" "--disable : disable MTS\n" "--start : start MTS\n" "--stop : stop MTS\n" "--adduser : add an existing system user to MTS (requires username)\n" "--deluser : delete an existing system user from MTS (requires username)\n" "--addclient : add a client machine to MTS (requires MAC address, IP, nbi image name)\n" "--delclient : delete a client machine from MTS (requires MAC address, IP, nbi image name)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet Mask:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Set password expiration and account inactivation delays" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "_: load here is a noun, the load of the system\n" "Load" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "" "The two critical parameters are the vertical refresh rate, which is the rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n" "that is beyond the capabilities of your monitor: you may damage your monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Modify" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s \".\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Need hostname, username and password!" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Insert floppy" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "" "WebDAV is a protocol that allows you to mount a web server's directory\n" "locally, and treat it like a local filesystem (provided the web server is\n" "configured as a WebDAV server). If you would like to add WebDAV mount\n" "points, select \"New\"." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "HardDrake" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "new" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable syslog reports to console 12" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Would you like to try again?" msgstr "" #: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Wizard" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected server" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose where you want to backup" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include the browser cache" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Please, choose your keyboard layout." msgstr "" #: ../../mouse.pm:1 ../../security/level.pm:1 #, c-format msgid "Standard" msgstr "" #: ../../standalone/mousedrake:1 #, c-format msgid "Please choose your mouse type." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Connect..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to configure printer \"%s\"!" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "not configured" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "ISA / PCMCIA" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "About" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "GlidePoint" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Proxies configuration" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Start: sector %s\n" "" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "No Mask" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface already configured" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Couldn't access the floppy!" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Warning: Free Software may not necessarily be patent free, and some Free\n" "Software included may be covered by patents in your country. For example, the\n" "MP3 decoders included may require a licence for further usage (see\n" "http://www.mp3licensing.com for more details). If you are unsure if a patent\n" "may be applicable to you, check your local laws." msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Mail Server" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please click on a partition" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on HP JetDirect" msgstr "" #: ../../any.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Linux" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Have a nice day!" msgstr "" #: ../../help.pm:1 #, c-format msgid "/dev/fd0" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Upgrade %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Connection" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels in progress ..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range Start:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The internet superserver daemon (commonly called inetd) starts a\n" "variety of other internet services as needed. It is responsible for starting\n" "many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n" "all of the services it is responsible for." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the height of the progress bar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save via %s on host: %s\n" "" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Argentina" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Domain Name Server" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Level:" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Mount points must begin with a leading /" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD device" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "CUPS server" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Postfix Mail Server" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without saving" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Yemen" msgstr "" #: ../advertising/11-mnf.pl:1 #, c-format msgid "This product is available on the MandrakeStore Web site." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> There are many things to choose from (%s).\n" "" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "GMT - DrakClock" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "An error occurred:\n" "\n" "\n" "%s\n" "\n" "This may come from corrupted system configuration files\n" "on the USB key, in this case removing them and then\n" "rebooting Mandrake Move would fix the problem. To do\n" "so, click on the corresponding button.\n" "\n" "\n" "You may also want to reboot and remove the USB key, or\n" "examine its contents under another OS, or even have\n" "a look at log files in console #3 and #4 to try to\n" "guess what's happening." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Hard drive detection" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "You can provide it now via a floppy or your windows partition,\n" "or skip and do it later." msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Please enter the WebDAV server URL" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tajikistan" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Accept" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Description" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter summary text." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Mouse type: %s\n" "" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Choose a monitor" msgstr "" #: ../../any.pm:1 #, c-format msgid "Empty label not allowed" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (UK)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "I can't add any more partition" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Size in MB: " msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Remote printer" msgstr "" #: ../../any.pm:1 #, c-format msgid "Please choose a language to use." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "WARNING: this device has been previously configured to connect to the Internet.\n" "Simply accept to keep this device configured.\n" "Modifying the fields below will override this configuration." msgstr "" #: ../../any.pm:1 #, c-format msgid "I can set up your computer to automatically log on one user." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Floppy format" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Generic Printers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The scanners on this machine are available to other computers" msgstr "" #: ../../any.pm:1 #, c-format msgid "First sector of the root partition" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Alternative drivers" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Please check all options that you need.\n" "" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cape Verde" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "whether this cpu has the Cyrix 6x86 Coma bug" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Loading printer configuration... Please wait" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Options/Test" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive. It must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" #: ../../fs.pm:1 ../../fs.pm:1 #, c-format msgid "Mounting partition %s" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "User name" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Userdrake" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to use for Linux4Win?" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to missing %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Test pages" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Logical volume name " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "List of data to restore:\n" "\n" "" msgstr "" #: ../../fs.pm:1 ../../fs.pm:1 #, c-format msgid "Checking %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "TCP/Socket Printer Options" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card mem (DMA)" msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "Disconnecting from Internet " msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 #, c-format msgid "France" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "browse" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Checking installed software..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name missing!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on printers in the local network?\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turkey" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Alcatel speedtouch usb" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Number of buttons" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Vietnamese \"numeric row\" QWERTY" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Module" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred." msgstr "" #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Ctrl and Alt keys simultaneously" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 #, c-format msgid "United States" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "User umask" msgstr "" #: ../../any.pm:1 #, c-format msgid "Default OS?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Swiss (German layout)" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure all heads independently" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "NTP Server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Sulogin(8) in single user level" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Load/Save on floppy" msgstr "" #: ../../standalone/draksplash:1 ../../standalone/draksplash:1 #, c-format msgid "This theme does not yet have a bootsplash in %s !" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "nice" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Leaving in %d seconds" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Please choose which serial port your modem is connected to." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Property" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "LAN Configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ghana" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Path or Module required" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Advanced Options" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "View Configuration" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Coma bug" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or by another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"%s\": this option deletes all partitions on the selected hard drive\n" "\n" " * \"%s\": this option enables you to automatically create ext3 and swap\n" "partitions in the free space of your hard drive\n" "\n" "\"%s\": gives access to additional features:\n" "\n" " * \"%s\": saves the partition table to a floppy. Useful for later\n" "partition-table recovery if necessary. It is strongly recommended that you\n" "perform this step.\n" "\n" " * \"%s\": allows you to restore a previously saved partition table from a\n" "floppy disk.\n" "\n" " * \"%s\": if your partition table is damaged, you can try to recover it\n" "using this option. Please be careful and remember that it doesn't always\n" "work.\n" "\n" " * \"%s\": discards all changes and reloads the partition table that was\n" "originally on the hard drive.\n" "\n" " * \"%s\": unchecking this option will force users to manually mount and\n" "unmount removable media such as floppies and CD-ROMs.\n" "\n" " * \"%s\": use this option if you wish to use a wizard to partition your\n" "hard drive. This is recommended if you do not have a good understanding of\n" "partitioning.\n" "\n" " * \"%s\": use this option to cancel your changes.\n" "\n" " * \"%s\": allows additional actions on partitions (type, options, format)\n" "and gives more information about the hard drive.\n" "\n" " * \"%s\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "When defining the size of a partition, you can finely set the partition\n" "size by using the Arrow keys of your keyboard.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and the [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected)\n" "\n" " * Ctrl-d to delete a partition\n" "\n" " * Ctrl-m to set the mount point\n" "\n" "To get information about the different file system types available, please\n" "read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error installing packages:" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Lexmark inkjet configuration" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Undo" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Save partition table" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Finnish" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Macedonia" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user to this group." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovenian" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Authorize:\n" "\n" "- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n" "\n" "- only local ones if set to \"LOCAL\"\n" "\n" "- none if set to \"NONE\".\n" "\n" "To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Libya" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Configuring scripts, installing software, starting servers..." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on parallel port #%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Burn to CD" msgstr "" #: ../../any.pm:1 #, c-format msgid "Table" msgstr "" #: ../../fs.pm:1 #, c-format msgid "I don't know how to format %s in type %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "Model" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "USB printer #%s" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Stop Server" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "\n" "Select the theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separately" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Modem" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tuvalu" msgstr "" #: ../../help.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Use auto detection" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "GPM adds mouse support to text-based Linux applications such the\n" "Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n" "and includes support for pop-up menus on the console." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Started on boot" msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Join the MandrakeSoft support teams and the Linux Community online to share your knowledge and help others by becoming a recognized Expert on the online technical support website:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "No password aging for" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "The following options can be set to customize your\n" "system security. If you need an explanation, look at the help tooltip.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatically find available printers on remote machines" msgstr "" #: ../../lang.pm:1 #, c-format msgid "East Timor" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "On Tape Device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save to Tape on device: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Login name" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Report unowned files" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Del profile..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing Foomatic..." msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "detected" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "The network needs to be restarted. Do you want to restart it ?" msgstr "" #: ../../standalone/drakbug:1 ../../standalone/drakbug:1 #, c-format msgid "Package: " msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SECURITY WARNING!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "StarOffice" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "No, I don't want autologin" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Windows Migration tool" msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "All languages" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Removing %s" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "%s not found...\n" "" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Testing your connection..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cache size" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Passwords are now enabled, but use as a networked computer is still not recommended." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Start sector: " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Congo (Brazzaville)" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Read" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Seychelles" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n" "\n" "For your printer Printerdrake has found:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Bad password on %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There is one unknown printer directly connected to your system" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Control key" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zambia" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security Administrator (login or email)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Sorry, we support only 2.4 kernels." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwerty)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Under Devel ... please wait." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Egypt" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Czech Republic" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Sound card" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Import Fonts" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "You have one big MicroSoft Windows partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Suppress Temporary Files" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Congratulations, the network and Internet configuration is finished.\n" "\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Change partition type" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Network Options" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable msec hourly security check" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Display theme\n" "under console" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on %s)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MM Series" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "average" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "New printer name" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Allow an ordinary user to mount the file system. The\n" "name of the mounting user is written to mtab so that he can unmount the file\n" "system again. This option implies the options noexec, nosuid, and nodev\n" "(unless overridden by subsequent options, as in the option line\n" "user,exec,dev,suid )." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Equatorial Guinea" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup System" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Build Backup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s \" or \"%s \".\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Currently, no alternative possibility is available" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Romanian (qwertz)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Write Config" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The routed daemon allows for automatic IP router table updated via\n" "the RIP protocol. While RIP is widely used on small networks, more complex\n" "routing protocols are needed for complex networks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kiribati" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Other (not drakbackup) keys in place already" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" "\n" "You will be presented with a list of different parameters to change to get\n" "an optimal graphical display: Graphic Card\n" "\n" " The installer will normally automatically detect and configure the\n" "graphic card installed on your machine. If it is not the case, you can\n" "choose from this list the card you actually have installed.\n" "\n" " In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs.\n" "\n" "\n" "\n" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer.\n" "\n" "\n" "\n" "Resolution\n" "\n" " Here you can choose the resolutions and color depths available for your\n" "hardware. Choose the one that best suits your needs (you will be able to\n" "change that after installation though). A sample of the chosen\n" "configuration is shown in the monitor.\n" "\n" "\n" "\n" "Test\n" "\n" " the system will try to open a graphical screen at the desired\n" "resolution. If you can see the message during the test and answer \"%s\",\n" "then DrakX will proceed to the next step. If you cannot see the message, it\n" "means that some part of the autodetected configuration was incorrect and\n" "the test will automatically end after 12 seconds, bringing you back to the\n" "menu. Change settings until you get a correct graphical display.\n" "\n" "\n" "\n" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Browse" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CDROM" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Do you want to try to connect to the Internet now?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Belgian" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you have an ISA sound card?" msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "" "No ethernet network adapter has been detected on your system.\n" "I cannot set up this connection type." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Windows" msgstr "" #: ../../common.pm:1 #, c-format msgid "Can't make screenshots before partitioning" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Name" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/Save _As" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s is not in the scanner database, configure it manually?" msgstr "" #: ../../any.pm:1 #, c-format msgid "Delay before booting default image" msgstr "" #: ../../any.pm:1 #, c-format msgid "Restrict command line options" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "East Europe" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use free space" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use dhcp" msgstr "" #: ../../standalone/logdrake:1 ../../standalone/logdrake:1 #, c-format msgid "Mail alert" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Internet configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uzbekistan" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Detected %s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _printers" msgstr "" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 #, c-format msgid "Finish" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Show automatically selected packages" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Togo" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "CPU flags reported by the kernel" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Something went wrong! - Is mkisofs installed?" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "16 MB" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Please try again" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "The model is correct" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "FAT resizing failed: %s" msgstr "" #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Individual package selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition is not resizeable" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Location" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable-hrc)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guatemala" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Journalised FS" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Ethernet cards promiscuity check" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "This machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "DOS drive letter: %s (just a guess)\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bahrain" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select the files or directories and click on 'OK'" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit scsi modules" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "family of the cpu (eg: 6 for i686 class)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "Because you are doing a network installation, your network is already configured.\n" "Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n" "" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run the daily security checks" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Keyboard layout: %s\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here you can choose whether the printers connected to this machine should be accessable by remote machines and by which remote machines." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Maltese (US)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "The creation of the boot floppy has been successfully completed \n" "" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Mounts and unmounts all Network File System (NFS), SMB (Lan\n" "Manager/Windows), and NCP (NetWare) mount points." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Launch the wizard" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Tvcard" msgstr "" #: ../../help.pm:1 #, c-format msgid "Toggle between normal/expert mode" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Size" msgstr "" #: ../../help.pm:1 #, c-format msgid "GRUB" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Greenland" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+/FirstMouse+" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Thursday" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct tape label. Tape is labelled %s." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet Connection Sharing has already been done.\n" "It's currently enabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete All NBIs" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This dialog allows you to fine tune your bootloader:\n" "\n" " * \"%s\": there are three choices for your bootloader:\n" "\n" " * \"%s\": if you prefer grub (text menu).\n" "\n" " * \"%s\": if you prefer LILO with its text menu interface.\n" "\n" " * \"%s\": if you prefer LILO with its graphical interface.\n" "\n" " * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" "you prefer, the bootloader can be installed on the second hard drive\n" "(\"%s\"), or even on a floppy disk (\"%s\");\n" "\n" " * \"%s\": after a boot or a reboot of the computer, this is the delay\n" "given to the user at the console to select a boot entry other than the\n" "default.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" "system! Be sure you know what you are doing before changing any of the\n" "options. !!\n" "\n" "Clicking the \"%s\" button in this dialog will offer advanced options which\n" "are normally reserved for the expert user." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set, send the mail report to this email address else send it to root." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Which configuration of XFree do you want to have?" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "More" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -scanbus' would also show you the device number." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "" "With this security level, the use of this system as a server becomes possible.\n" "The security is now high enough to use the system as a server which can accept\n" "connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level." msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Server Name" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Password" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" "%s cannot be displayed \n" ". No Help entry of this type\n" "" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful: this\n" "operation is dangerous. If you have not already done so, you\n" "first need to exit the installation, run \"chkdsk c:\" from a\n" "Command Prompt under Windows (beware, running graphical program\n" "\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" "Command Prompt!), optionally run defrag, then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tajik keyboard" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" "" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Font List" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX or some other means to boot your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Select file" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Choose the network or host on which the local printers should be made available:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Japan" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print option list" msgstr "" #: ../../standalone/localedrake:1 #, c-format msgid "The change is done, but to be effective you must logout" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Country / Region" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search servers" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NCP queue name missing!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Warning, another internet connection has been detected, maybe using your network" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CDRW media" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Saves and restores system entropy pool for higher quality random\n" "number generation." msgstr "" #: ../advertising/07-server.pl:1 #, c-format msgid "Turn your computer into a reliable server" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check empty password in /etc/shadow" msgstr "" #: ../../network/network.pm:1 #, c-format msgid " (driver %s)" msgstr "" #: ../../services.pm:1 #, c-format msgid "Start when requested" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Loopback file(s):\n" " %s\n" "" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "I don't know" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n" "\n" "With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n" "\n" "For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n" "\n" "Do you want to continue?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Telugu" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "\n" "\n" "Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Post Uninstall" msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "Connecting to Internet " msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid " (" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid level" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Novell server \"%s\", printer \"%s\"" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Mongolian (cyrillic)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Add a module" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Profile to delete:" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Local measure" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Warning : IP address %s is usually reserved !" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "busmouse" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Create Etherboot Enabled Boot Images:\n" " \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n" " \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n" " \tinterface to help manage/customize these images. To create the file \n" " \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n" " \tdhcpd.conf, you should create the etherboot images for at least one full kernel." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Account Login (user name)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Fdiv bug" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "Make sure you have configured your Network/Internet access with\n" "drakconnect before going any further." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept broadcasted icmp echo" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uruguay" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Benin" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Path selection" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Name/IP address of host:" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Monitor: %s\n" "" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Custom & system settings" msgstr "" #: ../../partition_table/raw.pm:1 #, c-format msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" "It means writing anything on the disk will end up with random, corrupted data." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP missing!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please check all users that you want to include in your backup." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The %s must be configured by printerdrake.\n" "You can launch printerdrake from the Mandrake Control Center in Hardware section." msgstr "" #: ../../../move/move.pm:1 ../../../move/move.pm:1 #, c-format msgid "Key isn't writable" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bangladesh" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (cable)" msgstr "" #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "Initial tests" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Continue" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom Restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Saturday" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": if a sound card is detected on your system, it is displayed here.\n" "If you notice the sound card displayed is not the one that is actually\n" "present on your system, you can click on the button and choose another\n" "driver." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the root umask." msgstr "" #: ../../install_any.pm:1 ../../partition_table.pm:1 #, c-format msgid "Error reading file %s" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Script-based" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "PLL setting:" msgstr "" #: ../../install_interactive.pm:1 ../../install_steps.pm:1 #, c-format msgid "You must have a FAT partition mounted in /boot/efi" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " on " msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "The URL must begin with http:// or https://" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers." msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (SunOS...)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Install/Upgrade" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "%d packages" msgstr "" #: ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Costa Rica" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" "Backup and Restore application\n" "\n" "--default : save default directories.\n" "--debug : show all debug messages.\n" "--show-conf : list of files or directories to backup.\n" "--config-info : explain configuration file options (for non-X users).\n" "--daemon : use daemon configuration. \n" "--help : show this message.\n" "--version : show version number.\n" "" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain Authentication Required" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Use libsafe for servers" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Icelandic" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "\n" "Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Maximum size\n" " allowed for Drakbackup (MB)" msgstr "" #: ../../loopback.pm:1 #, c-format msgid "" "Circular mounts %s\n" "" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo/grub mode" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Martinique" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "HardDrive / NFS" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Old user list:\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Search Backups" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "a number" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Swedish" msgstr "" #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../modules/interactive.pm:1 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if one of the selected services is no longer running" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Weekday" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Filesystem types:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Northern Mariana Islands" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on HP JetDirect" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "none" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Name of the profile to create (the new profile is created as a copy of the current one) :" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Floppy" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Ghostscript referencing" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Bootloader" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Authorize all services controlled by tcp_wrappers" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Move" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Bootloader to use" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB server host" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Name Servers:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Minute" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" "" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Expert mode" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linux Virtual Server, used to build a high-performance and highly\n" "available server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Micronesia" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "4 billion colors (32 bits)" msgstr "" #: ../../steps.pm:1 #, c-format msgid "License" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to generate the keys." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "" "Here, you can setup the security level and administrator of your machine.\n" "\n" "\n" "The Security Administrator is the one who will receive security alerts if the\n" "'Security Alerts' option is set. It can be a username or an email.\n" "\n" "\n" "The Security Level menu allows you to select one of the six preconfigured security levels\n" "provided with msec. These levels range from poor security and ease of use, to\n" "paranoid config, suitable for very sensitive server applications:\n" "\n" "\n" "Poor: This is a totally unsafe but very\n" "easy to use security level. It should only be used for machines not connected to\n" "any network and that are not accessible to everybody.\n" "\n" "\n" "Standard: This is the standard security\n" "recommended for a computer that will be used to connect to the Internet as a\n" "client.\n" "\n" "\n" "High: There are already some\n" "restrictions, and more automatic checks are run every night.\n" "\n" "\n" "Higher: The security is now high enough\n" "to use the system as a server which can accept connections from many clients. If\n" "your machine is only a client on the Internet, you should choose a lower level.\n" "\n" "\n" "Paranoid: This is similar to the previous\n" "level, but the system is entirely closed and security features are at their\n" "maximum" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using pppoa) usb" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting the printing system at boot time" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Do you want to start the connection at boot?" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Processor ID" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound trouble shooting" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwerty layout)" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Add Printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Drakbackup activities via CD:\n" "\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %s security level.\n" "\n" "This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n" "\n" "Do you really want to configure printing on this machine?" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Host \"%s\", port %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This partition can't be used for loopback" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File already exists. Use it?" msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "received: " msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right Alt key" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the list of alternative drivers for this sound card" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Gateway" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tonga" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tunisia" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "Profile: " msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Click on a device in the left tree in order to display its information here." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid autologin." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "XawTV isn't installed!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Do not include critical files (passwd, group, fstab)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "old static device name used in dev package" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable the logging of IPv4 strange packets" msgstr "" #: ../../any.pm:1 #, c-format msgid "This label is already used" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek (polytonic)" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection Time: " msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "" "Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid live upgrade." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use group id for execution" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the default user:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gabon" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Directory (or module) to put the backup on this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Domain" msgstr "" #: ../../any.pm:1 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" "automated. DrakX will analyze the disk boot sector and act according to\n" "what it finds there:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. This way you will be able to load either GNU/Linux or another\n" "OS.\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If it cannot make a determination, DrakX will ask you where to place the\n" "bootloader." msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 2 (optional)" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Boot device" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Which partition do you want to resize?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "United States Minor Outlying Islands" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Djibouti" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "A tool to monitor your logs" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "detected on port %s" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPD" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Graphics card: %s\n" "" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/Set as _Default" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept icmp echo" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Yaboot" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series with Wheel emulation" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Extended partition not supported on this platform" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Splash selection" msgstr "" #: ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 ../../network/isdn.pm:1 #, c-format msgid "ISDN Configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "high" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Choose file" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Summary: " msgstr "" #: ../../network/shorewall.pm:1 #, c-format msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Daily security check" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above or on printers in the local network?\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer default settings" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic PS2 Wheel Mouse" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the WP flag in the CR0 register of the cpu enforce write proctection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing old printer \"%s\"..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Select a device !" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected server" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Sagem (using dhcp) usb" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Southern Territories" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the processor" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain %s:\n" " \tFor users to be able to log into the system from a diskless client, their entry in\n" " \t/etc/shadow needs to be duplicated in %s. drakTermServ\n" " \thelps in this respect by adding or removing system users from this file." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "All data on this partition should be backed-up" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Installing package %s" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Checking device and configuring HPOJ..." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "To have more partitions, please delete one to be able to create an extended partition" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose packages to install" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Your system does not have enough space left for installation or upgrade (%d > %d)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": clicking on the \"%s\" button will open the printer configuration\n" "wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" "information on how to setup a new printer. The interface presented there is\n" "similar to the one used during installation." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bhutan" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Network interface" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet failed." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Reading printer data..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Korean keyboard" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Not connected" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "No internet connection configured" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Greek" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Kitts and Nevis" msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse with Wheel emulation" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable OF Boot?" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Erase your RW media (1st Session)" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Monitor VertRefresh: %s\n" "" msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Mount point" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "" "An error occurred:\n" "%s\n" "Try to change some parameters" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "TCP/IP host \"%s\", port %s" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "User :" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore system" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "These are the machines on which the locally connected scanner(s) should be available:" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "The DHCP end ip" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Another one" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Colombia" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Current configuration of `%s':\n" "\n" "Network: %s\n" "IP address: %s\n" "IP attribution: %s\n" "Driver: %s" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Reunion" msgstr "" #: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Details" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "For security reasons, it will be disconnected now." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Synchronization tool" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Checking your system..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the tape with volume label %s\n" " in the tape drive device %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mongolia" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Mounted\n" "" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Interface" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Users" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Encryption key for %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to recover your system?" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The portmapper manages RPC connections, which are used by\n" "protocols such as NFS and NIS. The portmap server must be running on machines\n" "which act as servers for protocols which make use of the RPC mechanism." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Detected hardware" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mauritius" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Myanmar (Burmese)" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Enabling swap partition %s" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to use as loopback (or not enough space left)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (old)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" "Click \"Transfer\" to overwrite it.\n" "You can also type a new name or skip this printer." msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Find the solutions of your problems via MandrakeSoft's online support platform." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", host \"%s\", port %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Monaco" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Partitioning failed: %s" msgstr "" #: ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../fs.pm:1 ../../swap.pm:1 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Canada (cable)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Floppy creation completed" msgstr "" #: ../../help.pm:1 ../../help.pm:1 #, c-format msgid "Upgrade" msgstr "" #: ../../help.pm:1 #, c-format msgid "Workstation" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kyrgyzstan" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on USB" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "We didn't detect any USB key on your system. If you\n" "plug in an USB key now, Mandrake Move will have the ability\n" "to transparently save the data in your home directory and\n" "system wide configuration, for next boot on this computer\n" "or another one. Note: if you plug in a key now, wait several\n" "seconds before detecting again.\n" "\n" "\n" "You may also proceed without an USB key - you'll still be\n" "able to use Mandrake Move as a normal live Mandrake\n" "Operating System." msgstr "" #: ../../help.pm:1 #, c-format msgid "With basic documentation" msgstr "" #: ../../services.pm:1 #, c-format msgid "Anacron is a periodic command scheduler." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Western Sahara" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Proxy should be http://..." msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "South Africa" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Eject tape after the backup" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Etherboot Floppy/ISO" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Modify printer configuration" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose a partition" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Edit current rule" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Please test the mouse" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not update inode access times on this file system\n" "(e.g, for faster access on the news spool to speed up news servers)." msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons with Wheel emulation" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Sticky-bit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Other Media" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan+" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup system files" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Sector" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Qatar" msgstr "" #: ../../any.pm:1 #, c-format msgid "LDAP Base dn" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select this package as there is not enough space left to install it" msgstr "" #: ../../help.pm:1 #, c-format msgid "generate auto-install floppy" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Dialing mode" msgstr "" #: ../../services.pm:1 #, c-format msgid "File sharing" msgstr "" #: ../../any.pm:1 #, c-format msgid "Clean /tmp at each boot" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Malawi" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: false" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "System settings" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please choose your type of mouse." msgstr "" #: ../../services.pm:1 #, c-format msgid "running" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "class of hardware device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "These are the machines and networks on which the locally connected printer(s) should be available:" msgstr "" #: ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 #, c-format msgid "United Kingdom" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Indonesia" msgstr "" #: ../../standalone/draksec:1 ../../standalone/draksec:1 #, c-format msgid "default" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "France [SECAM]" msgstr "" #: ../../any.pm:1 #, c-format msgid "restrict" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "must have" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Senegal" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Command line" msgstr "" #: ../advertising/08-store.pl:1 #, c-format msgid "Our full range of Linux solutions, as well as special offers on products and other \"goodies\", are available on our e-store:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "March" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to administrative files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Error during sendmail.\n" " Your report mail was not sent.\n" " Please configure sendmail" msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow set-user-identifier or set-group-identifier\n" "bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" "have suidperl(1) installed.)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Montserrat" msgstr "" #: ../../help.pm:1 #, c-format msgid "Automatic dependencies" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Swap" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Custom settings" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled, but we can't safely\n" "unplug it now.\n" "\n" "\n" "Click the button to reboot the machine, unplug it, remove write protection,\n" "plug the key again, and launch Mandrake Move again." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Other" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "TV card" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on SMB/Windows 95/98/NT server" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Configure CUPS" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid ", " msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit lspci" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remove selected host/network" msgstr "" #: ../../services.pm:1 #, c-format msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Uzbek (cyrillic)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Network Hotplugging" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, reports check result to tty." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From CD" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use this computer's Internet connection.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)." msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "Please choose which network adapter you want to use to connect to Internet." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo memory card access on your HP multi-function device" msgstr "" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Enhance your computer performance with the help of a selection of partners offering professional solutions compatible with Mandrake Linux" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Authors: " msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now disabled." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, verify checksum of the suid/sgid files." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Latin American" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Japanese text printing mode" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Old device file" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Info: " msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Button `%s': %s" msgstr "" #: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 ../../standalone/service_harddrake:1 #, c-format msgid "Please wait" msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "Genius NetMouse" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "None" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The entered IP is not correct.\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please be sure that the cron daemon is included in your services." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Ethernet Card" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Delete selected printer" msgstr "" #: ../../services.pm:1 ../../ugtk2.pm:1 #, c-format msgid "Info" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Install" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Click on \"%s\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"%s\" to stop this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Exit install" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Need a key to save your data" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP)." msgstr "" #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Remote CUPS server" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Sun - Mouse" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "There is only one configured network adapter on your system:\n" "\n" "%s\n" "\n" "I am about to setup your Local Area Network with that adapter." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit cpuinfo" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Minimal install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ethiopia" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "YES" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable \"crontab\" and \"at\" for users" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Devanagari" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Total size: %d / %d MB" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "disabled" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Search for new scanners" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Disabling servers..." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Installation of %s failed. The following error occured:" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new ones could be found. In that case, you must make sure\n" "to upgrade as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network printer (TCP/Socket)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup User files..." msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install system" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "First DNS Server (optional)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternatively, you can specify a device name/file name in the input line" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" "is greater than 3 in /etc/security/msec/security.conf, creates the\n" "symlink /etc/security/msec/server to point to\n" "/etc/security/msec/server..\n" "\n" "The /etc/security/msec/server is used by chkconfig --add to decide to\n" "add a service if it is present in the file during the installation of\n" "packages." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Russian (Phonetic)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "dhcpd Config..." msgstr "" #: ../../any.pm:1 #, c-format msgid "LILO/grub Installation" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Israeli" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Floppy can be removed now" msgstr "" #: ../../help.pm:1 #, c-format msgid "Truly minimal install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Denmark" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving partition..." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "(This) DHCP Server IP" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Test of the configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing %s ..." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "If you told the installer that you wanted to individually select packages,\n" "it will present a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right to let you know the purpose of the package.\n" "\n" "!! If a server package has been selected, either because you specifically\n" "chose the individual package or because it was part of a group of packages,\n" "you will be asked to confirm that you really want those servers to be\n" "installed. By default Mandrake Linux will automatically start any installed\n" "services at boot time. Even if they are safe and have no known issues at\n" "the time the distribution was shipped, it is entirely possible that that\n" "security holes were discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" "install the listed services and they will be started automatically by\n" "default during boot. !!\n" "\n" "The \"%s\" option is used to disable the warning dialog which appears\n" "whenever the installer automatically selects a package to resolve a\n" "dependency issue. Some packages have relationships between each other such\n" "that installation of a package requires that some other program is also\n" "rerquired to be installed. The installer can determine which packages are\n" "required to satisfy a dependency to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows you to load a\n" "package list created during a previous installation. This is useful if you\n" "have a number of machines that you wish to configure identically. Clicking\n" "on this icon will ask you to insert a floppy disk previously created at the\n" "end of another installation. See the second tip of last step on how to\n" "create such a floppy." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose your filesystem encryption key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sierra Leone" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Botswana" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Andorra" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "(default value: %s)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (Letter)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "DHCP Server Configuration.\n" "\n" "Here you can select different options for the DHCP server configuration.\n" "If you don't know the meaning of an option, simply leave it as it is.\n" "\n" "" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Choose an X server" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Copying to memory to allow removing the CDROM" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Swap partition size in MB: " msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No changes to backup!" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Formatted\n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Type of install" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated numbers" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rusers protocol allows users on a network to identify who is\n" "logged in on other responding machines." msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Automatic Steps Configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Barbados" msgstr "" #: ../advertising/02-community.pl:1 #, c-format msgid "Want to know more and to contribute to the Open Source community? Get involved in the Free Software world!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to backup..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "" "Connection failed.\n" "Verify your configuration in the Mandrake Control Center." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "received" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable su only from the wheel group members or for any user" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_New" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DNS Server IP" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "IP Range End:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "High" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Add a new printer to the system" msgstr "" #: ../../any.pm:1 #, c-format msgid "NoVideo" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "this field describes the device" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Adding printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printers" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Installation image directory" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS Server" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Port: %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Spain" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: %s" msgstr "" #: ../../any.pm:1 #, c-format msgid "This user name has already been added" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Choose a file" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Apply" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Auto-detect available ports" msgstr "" #: ../../lang.pm:1 #, c-format msgid "San Marino" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently disabled" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 #, c-format msgid "Belgium" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kuwait" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the window manager to run:" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "December" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "sub generation of the cpu" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "First Time Wizard" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Taiwan" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Pakistan" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "please wait, parsing file: %s" msgstr "" #: ../../install_steps.pm:1 ../../../move/move.pm:1 #, c-format msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Importance: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program." msgstr "" #: ../../standalone/drakperm:1 ../../standalone/drakperm:1 #, c-format msgid "Permissions" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider name (ex provider.net)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use the Windows partition for loopback" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (typewriter)" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connection type: " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Graphical interface" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Chad" msgstr "" #: ../../lang.pm:1 #, c-format msgid "India" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovakia" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Singapore" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cambodia" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Monitor HorizSync: %s\n" "" msgstr "" #: ../../standalone/drakperm:1 ../../standalone/drakperm:1 #, c-format msgid "Path" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "NOT FOUND" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine is booted.\n" "\n" "It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n" "\n" "Do you want to have the automatic starting of the printing system turned on again?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer %s\n" "What do you want to modify on this printer?" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Add host" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "If you really think that you know which driver is the right one for your card\n" "you can pick one in the above list.\n" "\n" "The current driver for your \"%s\" sound card is \"%s\" " msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "No CDROM support" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "China (broadcast)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use quota for backup files." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer \"%s\"..." msgstr "" #: ../../fs.pm:1 #, c-format msgid "" "Do not allow execution of any binaries on the mounted\n" "file system. This option might be useful for a server that has file systems\n" "containing binaries for architectures other than its own." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Internet connection" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Welcome to the Open Source world." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bosnia and Herzegovina" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n" "" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "" "You must enter a host name or an IP address.\n" "" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 #, c-format msgid "Netherlands" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sending files by FTP" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Internal ISDN card" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\"" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Title" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Install & convert Fonts" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "WARNING" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installing bootloader" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "replay" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "detected %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Expect is an extension to the Tcl scripting language that allows interactive sessions without user intervention." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (U.S.)" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Bad backup file" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" "\n" "What would you like to do?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter IP address and port of the host whose printers you want to use." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Pipe into command" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Haiti" msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detecting devices..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom allows you to specify your own day and time. The other options use run-parts in /etc/crontab." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "Description of the fields:\n" "\n" "" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Basic options" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the name of the CPU" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Accept bogus IPv4 error messages" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Refreshing printer data..." msgstr "" #: ../../install2.pm:1 #, c-format msgid "You must also format %s" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Be careful: this operation is dangerous." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Insert a floppy containing package selection" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "Server: " msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Alerts:" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Sweden" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Expect for SSH" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Poland" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Other ports" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../network/adsl.pm:1 ../../network/adsl.pm:1 ../../network/adsl.pm:1 #, c-format msgid " - detected" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SMBus controllers" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection timeout (in sec)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Croatian" msgstr "" #: ../../help.pm:1 #, c-format msgid "Use existing partition" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Unable to contact mirror %s" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/Help/_About..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remove user directories before restore." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "CUPS printer configuration" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "could not find any font in your mounted partitions" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "F00f bug" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 #, c-format msgid "XFree %s" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Domain Name:" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Root umask" msgstr "" #: ../../any.pm:1 #, c-format msgid "On Floppy" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Reboot by the console user" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Restore" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Server:" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check if the network devices are in promiscuous mode." msgstr "" #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages..." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Please wait, setting up system configuration files on USB key..." msgstr "" #: ../../any.pm:1 #, c-format msgid "Init Message" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Rescue partition table" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cyprus" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connection complete." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Remove from RAID" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Configuration Wizards" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ISDN connection" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD-R / DVD-R" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "primary" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This dialog is used to choose which services you wish to start at boot\n" "time.\n" "\n" "DrakX will list all the services available on the current installation.\n" "Review each one carefully and uncheck those which are not needed at boot\n" "time.\n" "\n" "A short explanatory text will be displayed about a service when it is\n" "selected. However, if you are not sure whether a service is useful or not,\n" "it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services that you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Niue" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Skip" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Activates/Deactivates all network interfaces configured to start\n" "at boot time." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "important" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Mandrake Linux Printer Management Tool" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Total Progress" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "DrakX will first detect any IDE devices present in your computer. It will\n" "also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection is not foolproof, DrakX may fail in detecting\n" "your hard drives. If so, you'll have to specify your hardware by hand.\n" "\n" "If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" "want to configure options for it. You should allow DrakX to probe the\n" "hardware for the card-specific options which are needed to initialize the\n" "adapter. Most of the time, DrakX will get through this step without any\n" "issues.\n" "\n" "If DrakX is not able to probe for the options to automatically determine\n" "which parameters need to be passed to the hardware, you'll need to manually\n" "configure the driver." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Aruba" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Users" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing bootloader..." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Enter your user information, password will be used for screensaver" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway (e.g. %s)" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "The passwords do not match" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "Examples for correct IPs:\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose the media for backup." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Frequency (MHz)" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "To use this saved packages selection, boot installation with ``linux defcfg=floppy''" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of the processor" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Hardware clock set to GMT" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Do you want to start a new configuration ?" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Give a file name" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the port that your printer is connected to." msgstr "" #: ../../standalone/livedrake:1 #, c-format msgid "Change Cd-Rom" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Paraguay" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Configuration is complete, do you want to apply settings ?" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Use Incremental/Differential Backups (do not replace old backups)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/dhcpd.conf:\n" " \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n" " \taddress and net boot images to the machine. drakTermServ helps create/remove \n" " \tthese entries.\n" "\t\t\t\n" " \t(PCI cards may omit the image - etherboot will request the correct image. \n" "\t\t\tYou should also consider that when etherboot looks for the images, it expects \n" "\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" "\t\t\t \n" " \tA typical dhcpd.conf stanza to support a diskless client looks like:" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no known driver for your sound card (%s)" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "force" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Exit" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have any configured interface.\n" "Configure them first by clicking on 'Configure'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Estonian" msgstr "" #: ../../services.pm:1 #, c-format msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Enter your CD Writer device name\n" " ex: 0,1,0" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "ALL" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Clients" msgstr "" #: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Choose the network interface" msgstr "" #: ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown Model" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "CD/DVD burners" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" "" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Enable \"%s\" to read the file" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "choose image" msgstr "" #: ../../network/shorewall.pm:1 #, c-format msgid "Firewalling configuration detected!" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Connection name" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "x coordinate of text box\n" "in number of characters" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You may not be able to install lilo (since lilo doesn't handle a LV on multiple PVs)" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Updating package selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount the loopback file %s?" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "The floppy has been successfully generated.\n" "You may now replay your installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use CD-R/DVD-R to backup" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the number of buttons the mouse has" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Replay" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup other files" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "No floppy drive available" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files are corrupted" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "TV norm:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Cpuid family" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "32 MB" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: thin" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (new)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the arithmetic coprocessor has an exception vector attached" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "Please be sure to add a /boot partition" msgstr "" #: ../../any.pm:1 #, c-format msgid "Other OS (MacOS...)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "To activate the mouse," msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing up the network" msgstr "" #: ../../common.pm:1 #, c-format msgid "Screenshots will be available after install in %s" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose which one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Tanzania" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Computing FAT filesystem bounds" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "Backup Sources: \n" "" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "custom" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Content of the file" msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication LDAP" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "in order to keep %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Let me pick any driver" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "transmitted" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Palestine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "RAID md%s\n" "" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "%d comma separated strings" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " isdn" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Here is the full list of keyboards available" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Theme name" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Help" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Choosing an arbitrary driver" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cook Islands" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Here you can choose whether the scanners connected to this machine should be accessable by remote machines and by which remote machines." msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "the width of the progress bar" msgstr "" #: ../../fs.pm:1 ../../fs.pm:1 #, c-format msgid "Formatting partition %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hostname required" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselect fonts installed" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Wheel" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Submit kernel version" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/logdrake:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Cancel" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Searching for configured scanners ..." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Videocard" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tBackups use tar and bzip2\n" "" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 #, c-format msgid "Remove Selected" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _modems" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Remove printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "View Last Log" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Which services would you like to allow the Internet to connect to?" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Connection Type" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "" "Welcome to the mail configuration utility.\n" "\n" "Here, you'll be able to set up the alert system.\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakperm:1 #, c-format msgid "Other" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 #, c-format msgid "Default" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Button 2 Emulation" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Please enter a package name." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run chkrootkit checks" msgstr "" #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "type1inst building" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Abiword" msgstr "" #: ../../standalone/draksplash:1 ../../standalone/draksplash:1 #, c-format msgid "choose image file" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "X server" msgstr "" #: ../../any.pm:1 #, c-format msgid "Domain Admin User Name" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "There was an error while scanning for TV channels" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "US keyboard (international)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Not installed" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Alt keys simultaneously" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "LAN connection" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/-" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Italian" msgstr "" #: ../../interactive.pm:1 #, c-format msgid "Basic" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "http://www.mandrakelinux.com/en/92errata.php3" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Honduras" msgstr "" #: ../../help.pm:1 ../../help.pm:1 #, c-format msgid "pdq" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Samba server" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" "" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Please choose for each step whether it will replay like your install, or it will be manual" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "You can also decide here whether scanners on remote machines should be made available on this machine." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Network by FTP.\n" "" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Reports check result to tty" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You must enter a device or file name!" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Quit" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Graphics memory: %s kB\n" "" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software\n" "Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to compilation tools" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Global statistics" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select data to restore..." msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)\n" "at the beginning of the disk" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Standard test page" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Time Zone" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Create" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "What" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "There was an error ordering packages:" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bulgarian (BDS)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Server" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem encryption key" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Gujarati" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " While you can use a pool of IP addresses, rather than setup a specific entry for\n" " a client machine, using a fixed address scheme facilitates using the functionality\n" " of client-specific configuration files that ClusterNFS provides.\n" "\t\t\t\n" " Note: The '#type' entry is only used by drakTermServ. Clients can either be 'thin'\n" " or 'fat'. Thin clients run most software on the server via xdmcp, while fat clients run \n" " most software on the client machine. A special inittab, %s is\n" " written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n" " modified if thin clients are used, to enable xdmcp. Since there are security issues in \n" " using xdmcp, hosts.deny and hosts.allow are modified to limit access to the local\n" " subnet.\n" "\t\t\t\n" " Note: The '#hdw_config' entry is also only used by drakTermServ. Clients can either \n" " be 'true' or 'false'. 'true' enables root login at the client machine and allows local \n" " hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n" " by creating separate config files associated with the client's IP address and creating \n" " read/write mount points to allow the client to alter the file. Once you are satisfied \n" " with the configuration, you can remove root login privileges from the client.\n" "\t\t\t\n" " Note: You must stop/start the server after adding or changing clients." msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "Please choose the first number of the 10-range you wish to edit,\n" "or just hit Enter to proceed.\n" "Your choice? " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" " Copyright (C) 2002 by MandrakeSoft \n" "\tStew Benedict sbenedict@mandrakesoft.com\n" "\n" "" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Save theme" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Brazil" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install" msgstr "" #: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network Configuration Wizard" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Removable media automounting" msgstr "" #: ../../services.pm:1 #, c-format msgid "Printing" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "There are no printers found which are directly connected to your machine" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Create a new partition" msgstr "" #: ../../harddrake/sound.pm:1 ../../harddrake/sound.pm:1 #, c-format msgid "Driver:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "unknown" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use fdisk" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "MOVE YOUR WHEEL!" msgstr "" #: ../../standalone/net_monitor:1 ../../standalone/net_monitor:1 #, c-format msgid "sent: " msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Automatic IP" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"%s\" to reboot the system. The first thing you\n" "should see after your computer has finished doing its hardware tests is the\n" "bootloader menu, giving you the choice of which operating system to start.\n" "\n" "The \"%s\" button shows two more buttons to:\n" "\n" " * \"%s\": to create an installation floppy disk that will automatically\n" "perform a whole installation without the help of an operator, similar to\n" "the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"%s\". This is a partially automated installation. The partitioning\n" "step is the only interactive procedure.\n" "\n" " * \"%s\". Fully automated installation: the hard disk is completely\n" "rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a number of similar machines.\n" "See the Auto install section on our web site for more information.\n" "\n" " * \"%s\"(*): saves a list of the packages selected in this installation.\n" "To use this selection with another installation, insert the floppy and\n" "start the installation. At the prompt, press the [F1] key and type >>linux\n" "defcfg=\"floppy\" <<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Moldova" msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "Kensington Thinking Mouse" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Configuration of a remote printer" msgstr "" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "An online platform to respond to enterprise support needs." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "URL should begin with 'ftp:' or 'http:'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Oriya" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Add a new rule at the end" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "LiLo and Bootsplash themes installation successful" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine." msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Quit without writing the partition table?" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Genius NetScroll" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "On Hard Drive" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "Installing packages..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dutch" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Angola" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "The following packages need to be installed:\n" "" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "service setting" msgstr "" #: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Custom" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Latvia" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "File is already used by another loopback, choose another one" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Read-only" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable name resolution spoofing protection. If\n" "\"alert\" is true, also reports to syslog." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No known driver" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "1 MB" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If it is not the one you want to configure, enter a device name/file name in the input line" msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "" "No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Configure Local Area Network..." msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "" "The USB key seems to have write protection enabled. Please\n" "unplug it, remove write protection, and then plug it again." msgstr "" #: ../../services.pm:1 #, c-format msgid "Launch the sound system on your machine" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Verify checksum of the suid/sgid files" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Run some checks against the rpm database" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Execute" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Preparing printer database..." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Information" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "No network card" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "3 buttons" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 #, c-format msgid "Which filesystem do you want?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Malta" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Detailed information" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Printer default settings\n" "\n" "You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower." msgstr "" #: ../../install_any.pm:1 #, c-format msgid "This floppy is not FAT formatted" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This option will save files that have changed. Exact behavior depends on whether incremental or differential mode is used." msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Graphic Card" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Resizing Windows partition" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cameroon" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Provider dns 1 (optional)" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Saami (swedish/finnish)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 ../../standalone/drakbug:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/net_monitor:1 ../../standalone/printerdrake:1 #, c-format msgid "Close" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "\"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Calendar" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Catalog Entry" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Iceland" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Network & Internet Configuration" msgstr "" #: ../../common.pm:1 #, c-format msgid "consolehelper missing" msgstr "" #: ../../services.pm:1 #, c-format msgid "stopped" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Whether the FPU has an irq vector" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Ext2" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Expand Tree" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "The old \"%s\" driver is blacklisted.\n" "\n" "It has been reported to oops the kernel on unloading.\n" "\n" "The new \"%s\" driver'll only be used on next bootstrap." msgstr "" #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Expert Mode" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer options" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Local Network adress" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup your System files. (/etc directory)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the user umask." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been updated after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Samba Server" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Australian Optus cable TV" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid " / between elements | selects | next screen " msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Subnet:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Zimbabwe" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "When" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "You need the Alcatel microcode.\n" "Download it at:\n" "%s\n" "and copy the mgmt.o in /usr/share/speedtouch" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Hour" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Second DNS Server (optional)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Finland" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Color depth: %s\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It must be upgraded" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Loading from floppy" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Timezone - DrakClock" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable the logging of IPv4 strange packets." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Slovenia" msgstr "" #: ../../standalone/mousedrake:1 #, c-format msgid "Mouse test" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "" "Drakperm is used to see files to use in order to fix permissions, owners, and groups via msec.\n" "You can also edit your own rules which will owerwrite the default rules." msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "ProgressBar color selection" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "Here are the entries on your boot menu so far.\n" "You can create additional entries or change the existing ones." msgstr "" #: ../../help.pm:1 #, c-format msgid "/dev/hda" msgstr "" #: ../../help.pm:1 #, c-format msgid "/dev/hdb" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "" "Application Name\n" "or Full Path:" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Runs commands scheduled by the at command at the time specified when\n" "at was run, and runs batch commands when the load average is low enough." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Radio support:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing SANE packages..." msgstr "" #: ../../any.pm:1 #, c-format msgid "LDAP" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "SILO" msgstr "" #: ../../diskdrake/removable.pm:1 #, c-format msgid "Change type" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", USB printer #%s" msgstr "" #: ../../any.pm:1 #, c-format msgid "SILO Installation" msgstr "" #: ../../install_messages.pm:1 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "Enable Network Time Protocol" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "paranoid" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Do not send mails when unneeded" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Your scanner(s) will not be available on the network." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Send mail report after each backup to:" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n" "" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolution" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enabling su only from members of the wheel group or allow su from any user." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakgw:1 #, c-format msgid "reconfigure" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Shell timeout" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Xinetd Service" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to network tools" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Firmware-Upload for HP LaserJet 1000" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "And, of course, push multimedia to its limits with the very latest software to play videos, audio files and to handle your images or photos." msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Here is a list of all auto-detected printers. " msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Restore Selected\n" "Files" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "%s exists, delete?\n" "\n" "Warning: If you've already done this process you'll probably\n" " need to purge the entry from authorized_keys on the server." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Please fill or check the field below" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Do you want to save /etc/fstab modifications" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Boot Protocol" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "LVM-disks %s\n" "" msgstr "" #: ../../services.pm:1 #, c-format msgid "On boot" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The package %s is needed. Install it?" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bus identification" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Vatican" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Please make a backup of your data first" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "ADSL adapters" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Eritrea" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot ISO" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Firmware needed" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove List" msgstr "" #: ../advertising/05-desktop.pl:1 #, c-format msgid "A customizable environment" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Inuktitut" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Some protocols, like rsync, may be configured at the server end. Rather than using a directory path, you would use the 'module' name for the service path." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Morocco" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Which printer model do you have?" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Add a new printer" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " All of your selected data have been " msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nepal" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Delete" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "cpu # " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "chunk size" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" "\n" "If set to NONE, no issues are allowed.\n" "\n" "Else only /etc/issue is allowed." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Enable/Disable sulogin(8) in single user level." msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "commands before booting, or 'c' for a command-line." msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "Problems installing package %s" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "You will receive an alert if the load is higher than this value" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Add a scanner manually" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Reload partition table" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Yes, I want autologin with this (user, desktop)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Selected" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Search for fonts in installed list" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The Local Network did not finish with `.0', bailing out." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Boot" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " and the CD is in the drive" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Tuner type:" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Now, it's time to select a printing system for your computer. Other OSs may\n" "offer you one, but Mandrake Linux offers two. Each of the printing system\n" "is best suited to particular types of configuration.\n" "\n" " * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" "if you have a direct connection to your printer, you want to be able to\n" "panic out of printer jams, and you do not have networked printers. (\"%s\"\n" "will handle only very simple network cases and is somewhat slow when used\n" "with networks.) It's recommended that you use \"pdq\" if this is your first\n" "experience with GNU/Linux.\n" "\n" " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" "printing to your local printer or to one halfway around the planet. It is\n" "simple to configure and can act as a server or a client for the ancient\n" "\"lpd \" printing system, so it compatible with older operating systems\n" "which may still need print services. While quite powerful, the basic setup\n" "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" "front-ends for printing or choosing printer options and for managing the\n" "printer.\n" "\n" "If you make a choice now, and later find that you don't like your printing\n" "system you may change it by running PrinterDrake from the Mandrake Control\n" "Center and clicking the expert button." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "\"Menu\" key" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Security Administrator:" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the shell timeout. A value of zero means no timeout." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy succeeded" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "" "You can't use another CDROM when the following programs are running: \n" "%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check permissions of files in the users' home." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "You don't have an Internet connection.\n" "Create one first by clicking on 'Configure'" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Fonts copy" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Automated" msgstr "" #: ../../Xconfig/test.pm:1 #, c-format msgid "Do you want to test the configuration?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Save packages selection" msgstr "" #: ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Actions" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Remove the last item" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "User list to restore (only the most recent date per user is important)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No net boot images created!" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pptp" msgstr "" #: ../../services.pm:1 ../../services.pm:1 #, c-format msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check files/directories writable by everybody" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Learn how to use this printer" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Configure the network now" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose a mirror from which to get the packages" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Size: " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which sector do you want to move it to?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bahamas" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Do you want to click on this button?" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Manual configuration" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "search" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "This package loads the selected keyboard map as set in\n" "/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" "You should leave this enabled for most machines." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Xpmac (installation display driver)" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf host name must not contain a ." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse icmp echo." msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Syslog is the facility by which many daemons use to log messages\n" "to various system log files. It is a good idea to always run syslog." msgstr "" #: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Unknown/Others" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "No TV Card detected!" msgstr "" #: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detected" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "You are about to configure your computer to install a PXE server as a DHCP server\n" "and a TFTP server to build an installation server.\n" "With that feature, other computers on your local network will be installable using this computer as source.\n" "\n" "Make sure you have configured your Network/Internet access using drakconnect before going any further.\n" "\n" "Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)." msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "" "OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n" "What's more, OSS drivers all reinvent the wheel.\n" "\n" "ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n" "supports quite a large range of ISA, USB and PCI cards.\n" "\n" "It also provides a much higher API than OSS.\n" "\n" "To use alsa, one can either use:\n" "- the old compatibility OSS api\n" "- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer you want to set up or enter a device name/file name in the input line" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Refuse" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "LOCAL" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "HFS" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "HardDrake runs a hardware probe, and optionally configures\n" "new/changed hardware." msgstr "" #: ../../fs.pm:1 #, c-format msgid "Creating and formatting file %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check additions/removals of sgid files." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose an existing LVM to add to" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "xfs restart" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "The printer \"%s\" already exists,\n" "do you really want to overwrite its configuration?" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use the scanners on hosts: " msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Unselected All" msgstr "" #: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1 #, c-format msgid "No partition available" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "" "Printer Management \n" "" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Domain Name Resolver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key (again)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Samba share name missing!" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type install done" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Detection in progress" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Whole Kernel -->" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "modem" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Welcome to %s" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " drakhelp 0.1\n" "Copyright (C) 2003 MandrakeSoft.\n" "This is free software and may be redistributed under the terms of the GNU GPL.\n" "\n" "Usage: \n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Bootsplash" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printer\n" "\n" "%s%s\n" "is directly connected to your system" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer sharing on hosts/networks: " msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s \". " msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "DrakClock" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without them. Would you like to specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it should\n" "not cause any damage." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Not the correct CD label. Disk is labelled %s." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Daemon, %s via:\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cuba" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "October" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Belize" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Searching for new printers..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (multi-session)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Kernel Boot Timeout" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Activate/Disable daily security check." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-CD-R.\n" "" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable libsafe if libsafe is found on the system" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Hungarian" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "" "Select your provider.\n" "If it isn't listed, choose Unlisted." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Automatic time synchronization (using NTP)" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Use my Windows partition" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "8 MB" msgstr "" #: ../../any.pm:1 #, c-format msgid "LDAP Server" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "PCMCIA support is usually to support things like ethernet and\n" "modems in laptops. It won't get started unless configured so it is safe to have\n" "it installed on machines that don't need it." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Choose your country" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- System Files:\n" "" msgstr "" #: ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 #, c-format msgid "Standalone Tools" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Where" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "but not matching" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Configuring PCMCIA cards..." msgstr "" #: ../../common.pm:1 #, c-format msgid "kdesu missing" msgstr "" #: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 #, c-format msgid "" "%s: %s requires a username...\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Encryption key" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Microsoft IntelliMouse" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "" "This setting will be activated after the installation.\n" "During installation, you will need to use the Right Control\n" "key to switch between the different keyboard layouts." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Christmas Island" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Automatic" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Installation of bootloader failed. The following error occured:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "EIDE/SCSI channel" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Set this printer as the default" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Verify that %s is the correct path" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "partition %s" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Paranoid" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "<-- Del User" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Location on the bus" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No printer found!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the vendor name of the device" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Erase entire disk" msgstr "" #: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " (Default)" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Automatic reconfiguration" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Receiving Speed:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turks and Caicos Islands" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "No Ip" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "<- Previous" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Transfer Now" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password and network authentication methods" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Toggle between flat and group sorted" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Themes" msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Options: %s" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "OKI winprinter configuration" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Helena" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Parallel port #%s" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Security Level" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sudan" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish (qwertz layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Syria" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm:1 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system from the list above or\n" "wait %d seconds for default boot.\n" "\n" "" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Portuguese" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: " msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DNS server address should be in format 1.2.3.4" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Control key" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Serbia" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Newzealand" msgstr "" #: ../../fsedit.pm:1 ../../fsedit.pm:1 #, c-format msgid "This directory should remain within the root filesystem" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Across Network" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "CapsLock key" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Install bootloader" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Select the memory size of your graphics card" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Enable/Disable crontab and at for users.\n" "\n" "Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" "and crontab(1))." msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTIONS]\n" "Network & Internet connection and monitoring application\n" "\n" "--defaultintf interface : show this interface by default\n" "--connect : connect to internet if not already connected\n" "--disconnect : disconnect to internet if already connected\n" "--force : used with (dis)connect : force (dis)connection.\n" "--status : returns 1 if connected 0 otherwise, then exit.\n" "--quiet : don't be interactive. To be used with (dis)connect." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Dynamic IP Address Pool:" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "LVM name?" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "" "Some devices in the \"%s\" hardware class were removed:\n" "" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Post Install" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The internal domain name" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IRQ" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "logdrake" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "Font Importation and monitoring application \n" "--windows_import : import from all available windows partitions.\n" "--xls_fonts : show all fonts that already exist from xls\n" "--strong : strong verification of font.\n" "--install : accept any font file and any directry.\n" "--uninstall : uninstall any font or any directory of font.\n" "--replace : replace all font if already exist\n" "--application : 0 none application.\n" " : 1 all application available supported.\n" " : name_of_application like so for staroffice \n" " : and gs for ghostscript for only this one." msgstr "" #: ../../standalone.pm:1 #, c-format msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" msgstr "" #: ../../any.pm:1 #, c-format msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with text menu" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "instantaneous" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Everything (no firewall)" msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a kernel image" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on USB" msgstr "" #: ../../interactive/newt.pm:1 #, c-format msgid "Do" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Contacting the mirror to get the list of available packages..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian AZERTY (old)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Brazilian (ABNT-2)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address of host/network:" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "the progress bar y coordinate\n" "of its upper left corner" msgstr "" #: ../../install_gtk.pm:1 #, c-format msgid "System installation" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Vincent and the Grenadines" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid reboot by the console user." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Open" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Location of auto_install.cfg file" msgstr "" #: ../../any.pm:1 #, c-format msgid "Open Firmware Delay" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Hungary" msgstr "" #: ../../lang.pm:1 #, c-format msgid "New Zealand" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Color configuration" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "There are already some restrictions, and more automatic checks are run every night." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "please choose the date to restore" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Netherlands Antilles" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Switching from ext2 to ext3" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Browse to new restore repository." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n" "\n" "It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "and %d unknown printers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Backup quota exceeded!\n" "%d MB used vs %d MB allocated." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "No ISDN PCI card found. Please select one on the next screen." msgstr "" #: ../../common.pm:1 #, c-format msgid "GB" msgstr "" #: ../../any.pm:1 #, c-format msgid "Please give a user name" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable CD Boot?" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Simply reboot" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid " enter `void' for void entry" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backups on unmountable media - Use Catalog to restore" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "January" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Password history length" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Winmodem connection" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" "\n" "You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n" "\n" "If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center." msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Now, you can run xawtv (under X Window!) !\n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Not enough swap space to fulfill installation, please add some" msgstr "" #. -PO: example: lilo-graphic on /dev/hda1 #: ../../install_steps_interactive.pm:1 #, c-format msgid "%s on %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid remote root login." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" "local time according to the time zone you selected. If the clock on your\n" "motherboard is set to local time, you may deactivate this by unselecting\n" "\"%s\", which will let GNU/Linux know that the system clock and the\n" "hardware clock are in the same timezone. This is useful when the machine\n" "also hosts another operating system like Windows.\n" "\n" "The \"%s\" option will automatically regulate the clock by connecting to a\n" "remote time server on the Internet. For this feature to work, you must have\n" "a working Internet connection. It is best to choose a time server located\n" "near you. This option actually installs a time server that can used by\n" "other machines on your local network as well." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create log file!" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1 #, c-format msgid "Which is your timezone?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use .backupignore files" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guinea" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "The system is now connected to the Internet." msgstr "" #: ../../lang.pm:1 #, c-format msgid "South Georgia and the South Sandwich Islands" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Japan (broadcast)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Monitor\n" "\n" " The installer will normally automatically detect and configure the\n" "monitor connected to your machine. If it is incorrect, you can choose from\n" "this list the monitor you actually have connected to your computer." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mozambique" msgstr "" #: ../../any.pm:1 #, c-format msgid "Icon" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Kill those programs" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please choose what you want to backup" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "256 colors (8 bits)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Read-write" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Size: %s\n" "" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Hostname: " msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Add a rule" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Chunk size %s\n" "" msgstr "" #: ../advertising/02-community.pl:1 #, c-format msgid "Build the future of Linux!" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Local Printer" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Floppy access error, unable to mount device %s" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ADSL connection" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration, please click Wizard or Advanced.\n" "" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Error!" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "cable connection detected" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Permission denied transferring %s to %s" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Report Bug" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Dominica" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Resize" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Resolution: %s\n" "" msgstr "" #: ../../install2.pm:1 #, c-format msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "The following packages are going to be removed" msgstr "" #: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 #, c-format msgid "Connect to the Internet" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Use existing partitions" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Canadian (Quebec)" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Mouse device: %s\n" "" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Reselect correct fonts" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Options\n" "\n" " Here you can choose whether you want to have your machine automatically\n" "switch to a graphical interface at boot. Obviously, you want to check\n" "\"%s\" if your machine is to act as a server, or if you were not successful\n" "in getting the display configured." msgstr "" #: ../advertising/13-mdkexpert_corporate.pl:1 #, c-format msgid "MandrakeExpert Corporate" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" " [everything]\n" " XFdrake [--noauto] monitor\n" " XFdrake resolution" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Write protection" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "You've not selected any font" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Language" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer model selection" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After changing type of partition %s, all data on this partition will be lost" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "ISDN adapters" msgstr "" #: ../../common.pm:1 #, c-format msgid "%d seconds" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A valid URI must be entered!" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Found \"%s\" interface do you want to use it ?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Re-configure interface and DHCP server" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Sound configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Photo test page" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Custom disk partitioning" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Enter Printer Name and Comments" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The following printers\n" "\n" "%s%s\n" "are directly connected to your system" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "You don't have any winmodem" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTY)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This should be a comma-separated list of local users or email addresses that you want the backup results sent to. You will need a functioning mail transfer agent setup on your system." msgstr "" #: ../../standalone/draksound:1 #, c-format msgid "No Sound Card detected!" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Mouse Port" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check for unsecured accounts" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "Need to restart the Display Manager for full changes to take effect. \n" "(service dm restart - at the console)" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Ftp Server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Uganda" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "%s fonts conversion" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the type of bus on which the mouse is connected" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "As a review, DrakX will present a summary of information it has about your\n" "system. Depending on your installed hardware, you may have some or all of\n" "the following entries. Each entry is made up of the configuration item to\n" "be configured, followed by a quick summary of the current configuration.\n" "Click on the corresponding \"%s\" button to change that.\n" "\n" " * \"%s\": check the current keyboard map configuration and change that if\n" "necessary.\n" "\n" " * \"%s\": check the current country selection. If you are not in this\n" "country, click on the \"%s\" button and choose another one. If your country\n" "is not in the first list shown, click the \"%s\" button to get the complete\n" "country list.\n" "\n" " * \"%s\": By default, DrakX deduces your time zone based on the country\n" "you have chosen. You can click on the \"%s\" button here if this is not\n" "correct.\n" "\n" " * \"%s\": check the current mouse configuration and click on the button to\n" "change it if necessary.\n" "\n" " * \"%s\": clicking on the \"%s\" button will open the printer\n" "configuration wizard. Consult the corresponding chapter of the ``Starter\n" "Guide'' for more information on how to setup a new printer. The interface\n" "presented there is similar to the one used during installation.\n" "\n" " * \"%s\": if a sound card is detected on your system, it is displayed\n" "here. If you notice the sound card displayed is not the one that is\n" "actually present on your system, you can click on the button and choose\n" "another driver.\n" "\n" " * \"%s\": by default, DrakX configures your graphical interface in\n" "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" "\"%s\" to reconfigure your graphical interface.\n" "\n" " * \"%s\": if a TV card is detected on your system, it is displayed here.\n" "If you have a TV card and it is not detected, click on \"%s\" to try to\n" "configure it manually.\n" "\n" " * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" "here. You can click on \"%s\" to change the parameters associated with the\n" "card.\n" "\n" " * \"%s\": If you want to configure your Internet or local network access\n" "now.\n" "\n" " * \"%s\": this entry allows you to redefine the security level as set in a\n" "previous step ().\n" "\n" " * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" "idea to protect yourself from intrusions by setting up a firewall. Consult\n" "the corresponding section of the ``Starter Guide'' for details about\n" "firewall settings.\n" "\n" " * \"%s\": if you wish to change your bootloader configuration, click that\n" "button. This should be reserved to advanced users.\n" "\n" " * \"%s\": here you'll be able to fine control which services will be run\n" "on your machine. If you plan to use this machine as a server it's a good\n" "idea to review this setup." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Comoros" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "May" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Yaboot mode" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Generic 3 Button Mouse" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "USA (cable)" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select another media to restore from" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Software Manager" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Re-submit" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "CD in place - continue." msgstr "" #: ../../common.pm:1 #, c-format msgid "KB" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Network & Internet" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Net Boot Images" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Sharing of local scanners" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Plug'n Play probing failed. Please select the correct monitor" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Detect again USB key" msgstr "" #: ../../services.pm:1 #, c-format msgid "Services and deamons" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name missing!" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "with /usr" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 #, c-format msgid "Network" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "" #: ../../any.pm:1 #, c-format msgid "This password is too simple" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Chkconfig obey msec rules" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Slovakian (QWERTZ)" msgstr "" #: ../advertising/06-development.pl:1 #, c-format msgid "To modify and to create in different languages such as Perl, Python, C and C++ has never been so easy thanks to GNU gcc 3 and the best Open Source development environments." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No devices found" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use daemon" msgstr "" #: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 ../../standalone/drakauth:1 ../../standalone/drakconnect:1 ../../standalone/logdrake:1 #, c-format msgid "Authentication" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Add this printer to Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Additional CUPS servers: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount %s?" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Algeria" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Via Network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use tar and bzip2 (rather than tar and gzip)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Initrd-size" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "In the case that different servers are available for your card, with or\n" "without 3D acceleration, you are then asked to choose the server that best\n" "suits your needs." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tBackups use tar and gzip\n" "" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Set as default" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "2 MB" msgstr "" #: ../../printer/main.pm:1 ../../standalone/printerdrake:1 #, c-format msgid "Configured on this machine" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Control keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --help - display this help \n" "" msgstr "" #: ../../standalone.pm:1 #, c-format msgid "" "[OPTION]...\n" " --no-confirmation don't ask first confirmation question in MandrakeUpdate mode\n" " --no-verify-rpm don't verify packages signatures\n" " --changelog-first display changelog before filelist in the description window\n" " --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Setting Default Printer..." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s (using module %s)" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Generating preview ..." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)." msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "ignore" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "Allow/Forbid X connections:\n" "\n" "- ALL (all connections are allowed),\n" "\n" "- LOCAL (only connection from local machine),\n" "\n" "- NONE (no connection)." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on parallel port #%s" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "serial" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "DVD-ROM" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../advertising/09-mdksecure.pl:1 #, c-format msgid "Get the best items with Mandrake Linux Strategic partners" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "" "You may now provide options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kenya" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "Use ``Unmount'' first" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Installing mtools packages..." msgstr "" #: ../../any.pm:1 #, c-format msgid "You must specify a root partition" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "first step creation" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Both Shift keys simultaneously" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --id - load the html help page which refers to id_label\n" "" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Select a scanner model" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Accept/Refuse bogus IPv4 error messages." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "LPRng - LPR New Generation" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Drakbackup Configuration" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Save as.." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Korea (North)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "" "This interface has not been configured yet.\n" "Launch the configuration wizard in the main window" msgstr "" #: ../../install_gtk.pm:1 #, c-format msgid "System configuration" msgstr "" #: ../../any.pm:1 ../../security/l10n.pm:1 #, c-format msgid "Autologin" msgstr "" #: ../../any.pm:1 #, c-format msgid "Domain Admin Password" msgstr "" #: ../advertising/05-desktop.pl:1 #, c-format msgid "Perfectly adapt your computer to your needs thanks to the 11 available Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME 2.2, Window Maker, ..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Configuring printer ..." msgstr "" #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "" "To ensure data integrity after resizing the partition(s), \n" "filesystem checks will be run on your next boot into Windows(TM)" msgstr "" #: ../../common.pm:1 #, c-format msgid "MB" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run some checks against the rpm database." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Virgin Islands (British)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bermuda" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "click here if you are sure." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "No configuration file found \n" "please click Wizard or Advanced." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Listed here are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, since they are good for most\n" "common installations. If you make any changes, you must at least define a\n" "root partition (\"/\"). Do not choose too small a partition or you will not\n" "be able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a \"/home\" partition\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 #, c-format msgid "Remove" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lesotho" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "utopia 25" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Pipe job into a command" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Remove system config files" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cote d'Ivoire" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "new dynamic device name generated by core kernel devfs" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakclock:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/drakgw:1 ../../standalone/harddrake2:1 #, c-format msgid "Yes" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Which protocol do you want to use?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore Progress" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Estonia" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next to the extended partitions." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Choose the host on which the local scanners should be made available:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Channel" msgstr "" #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "Add" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" " Error while sending mail. \n" "" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1 #, c-format msgid "Keyboard" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "Insert the CD with volume label %s\n" " in the CD drive under mount point /mnt/cdrom" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "Choose the connection you want to configure" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Please wait, setting security level..." msgstr "" #: ../../network/network.pm:1 ../../network/network.pm:1 #, c-format msgid "Configuring network device %s" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "activated" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Please choose which network interface will be used for the dhcp server." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Finding packages to upgrade..." msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount point: " msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "parse all fonts" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid direct root login." msgstr "" #: ../../security/help.pm:1 #, c-format msgid " Accept/Refuse broadcasted icmp echo." msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "With X" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Multi-head configuration" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "No browser available! Please install one" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "The rwho protocol lets remote users get a list of all of the users\n" "logged into a machine running the rwho daemon (similiar to finger)." msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Domain name" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Sharing of local printers" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Enable/Disable libsafe if libsafe is found on the system." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Available printers" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "NO" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Empty" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "text width" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The default lease (in seconds)" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "We are now going to configure the %s connection.\n" "\n" "\n" "Press \"%s\" to continue." msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Interface \"%s\"" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "With basic documentation (recommended!)" msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "1 button" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "There are %d unknown printers directly connected to your system" msgstr "" #: ../../Xconfig/main.pm:1 #, c-format msgid "Test" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Korea" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (default `%s'%s) " msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "official vendor name of the cpu" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Useless without Terminal Server" msgstr "" #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 #, c-format msgid "Vendor" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Interface %s" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure mouse" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the mount points" msgstr "" #: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "OK" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Yugoslavian (latin)" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Installing" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan with Wheel emulation" msgstr "" #: ../../any.pm:1 #, c-format msgid "Launch userdrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Is this an install or an upgrade?" msgstr "" #: ../../help.pm:1 #, c-format msgid "ISDN card" msgstr "" #: ../advertising/02-community.pl:1 #, c-format msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \"Community\" webpages." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Hard drive.\n" "" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This step is activated only if an old GNU/Linux partition has been found on\n" "your machine.\n" "\n" "DrakX now needs to know if you want to perform a new install or an upgrade\n" "of an existing Mandrake Linux system:\n" "\n" " * \"%s\": For the most part, this completely wipes out the old system. If\n" "you wish to change how your hard drives are partitioned, or change the file\n" "system, you should use this option. However, depending on your partitioning\n" "scheme, you can prevent some of your existing data from being over-written.\n" "\n" " * \"%s\": this installation class allows you to update the packages\n" "currently installed on your Mandrake Linux system. Your current\n" "partitioning scheme and user data is not altered. Most of other\n" "configuration steps remain available, similar to a standard installation.\n" "\n" "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" "running version \"8.1\" or later. Performing an Upgrade on versions prior\n" "to Mandrake Linux version \"8.1\" is not recommended." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "\n" " Copyright (C) 2001-2002 by MandrakeSoft \n" " DUPONT Sebastien (original version)\n" " CHAUMETTE Damien \n" "\n" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" " the Free Software Foundation; either version 2, or (at your option)\n" " any later version.\n" "\n" " This program is distributed in the hope that it will be useful,\n" " but WITHOUT ANY WARRANTY; without even the implied warranty of\n" " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" " GNU General Public License for more details.\n" "\n" " You should have received a copy of the GNU General Public License\n" " along with this program; if not, write to the Free Software\n" " Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" "\n" " Thanks:\n" " - pfm2afm: \n" "\t by Ken Borgendale:\n" "\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" " - type1inst:\n" "\t by James Macnicol: \n" "\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" " - ttf2pt1: \n" "\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" " Convert ttf font files to afm and pfb fonts\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on remote CUPS server" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "here if no." msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DHCP host name" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The maximum lease (in seconds)" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 #, c-format msgid "Please choose which serial port your mouse is connected to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Did it work properly?" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Mount the file system read-only." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Poor" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Report check result by mail" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Grenada" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP start range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Unsafe" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "SSH server" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid ", %s sectors" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakclock:1 ../../standalone/harddrake2:1 #, c-format msgid "No" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Guadeloupe" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Kannada" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "" "could not find any font.\n" "" msgstr "" #: ../../standalone/keyboarddrake:1 #, c-format msgid "Do you want the BackSpace to return Delete in console?" msgstr "" #: ../../Xconfig/monitor.pm:1 #, c-format msgid "Vertical refresh rate" msgstr "" #: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 #, c-format msgid "" "Entering step `%s'\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Niger" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech MouseMan" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing %s ..." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No printer" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "alert configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "NetWare Printer Options" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "%s BootSplash (%s) preview" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "February" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "General" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "/etc/issue* exist" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Add a user" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Network configuration (%d adapters)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "April" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Deactivate now" msgstr "" #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Philippines" msgstr "" #: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Ok" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "drakTermServ Overview" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Print Queue Name" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Do you want to use aboot?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Belarusian" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Move files to the new partition" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer.\n" "\n" "Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Pitcairn" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore From Catalog" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "IDE" msgstr "" #: ../../fs.pm:1 ../../fs.pm:1 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Lilo screen" msgstr "" #: ../../bootloader.pm:1 ../../help.pm:1 #, c-format msgid "LILO with graphical menu" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Estimating" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't unselect this package. It is already installed" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Go on anyway?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking for available packages and rebuilding rpm database..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report \n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Does not appear to be recordable media!" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Specify options" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Vanuatu" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "New user list:\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Either the server name or the server's IP must be given!" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to install\n" "SILO on your system, or another operating system removes SILO, or SILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used with\n" "the Mandrake rescue image, making it much easier to recover from severe system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the first\n" "drive and press \"Ok\"." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the password history length to prevent password reuse." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Norfolk Island" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Theme installation failed!" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Nothing to do" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Use for loopback" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Bug Report Tool" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Apply filter" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "use pppoe" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Moving files to the new partition" msgstr "" #: ../../Xconfig/card.pm:1 ../../Xconfig/card.pm:1 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../interactive.pm:1 #, c-format msgid "Advanced" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (Swedish)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Afghanistan" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "More Options" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Delete Hard Drive tar files after backup to other media." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burundi" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "cron is a standard UNIX program that runs user-specified programs\n" "at periodic scheduled times. vixie cron adds a number of features to the basic\n" "UNIX cron, including better security and more powerful configuration options." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add Client -->" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Read carefully!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "RW" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "Please,\n" "type in your tv norm and country" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 #, c-format msgid "Port" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "No (experts only)" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "No kernel selected!" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Set-GID" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "The encryption keys do not match" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "USB printer" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Right \"Windows\" key" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check empty password in /etc/shadow." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Before continuing, you should carefully read the terms of the license. It\n" "covers the entire Mandrake Linux distribution. If you do agree with all the\n" "terms in it, check the \"%s\" box. If not, simply turn off your computer." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" "" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "Resolutions" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "drakfirewall configurator\n" "\n" "This configures a personal firewall for this Mandrake Linux machine.\n" "For a powerful and dedicated firewall solution, please look to the\n" "specialized MandrakeSecurity Firewall distribution." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Please enter your username, password and domain name to access this host." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Remove selected host" msgstr "" #: ../../network/netconnect.pm:1 ../../network/netconnect.pm:1 #, c-format msgid "Network configuration" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/Autodetect _jaz drives" msgstr "" #: ../../any.pm:1 #, c-format msgid "No sharing" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule down one level" msgstr "" #: ../../common.pm:1 #, c-format msgid "TB" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "FATAL" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Refresh the list" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client %s:\n" " \tThrough clusternfs, each diskless client can have its own unique configuration files\n" " \ton the root filesystem of the server. By allowing local client hardware configuration, \n" " \tdrakTermServ will help create these files." msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "The DHCP server will allow other computer to boot using PXE in the given range of address.\n" "\n" "The network address is %s using a netmask of %s.\n" "\n" "" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../standalone/drakperm:1 ../../standalone/printerdrake:1 #, c-format msgid "Delete" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "I can setup your computer to automatically start the graphical interface (XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Build the disk" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnect %s" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Status:" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "HTTP proxy" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "SSH Server" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Network by rsync.\n" "" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "European protocol" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Note that currently all 'net' media also use the hard drive." msgstr "" #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../standalone/drakauth:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/draksplash:1 ../../../move/move.pm:1 ../../../move/move.pm:1 ../../../move/move.pm:1 #, c-format msgid "Error" msgstr "" #: ../../any.pm:1 #, c-format msgid "allow \"su\"" msgstr "" #: ../../lang.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Australia" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "please wait during ttmkfdir..." msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "Configure only card \"%s\"%s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Level" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Change the printing system" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "" "Your system supports multiple head configuration.\n" "What do you want to do?" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "mount failed: " msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure services" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Broadcast Address:" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter. Its result is stored as bogomips as a way to \"benchmark\" the cpu." msgstr "" #: ../../any.pm:1 #, c-format msgid "Image" msgstr "" #: ../../services.pm:1 #, c-format msgid "Remote Administration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." msgstr "" #: ../../modules.pm:1 #, c-format msgid "PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Selected All" msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "CUPS - Common Unix Printing System" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Webmin Service" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory to save to:" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Greece" msgstr "" #: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "All" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Which printing system (spooler) do you want to use?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "July" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Prints into %s" msgstr "" #: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "An error occurred" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (Typewriter-layout)" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Use password to authenticate users." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)." msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakautoinst:1 #, c-format msgid "manual" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Filename text to search for:" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer manufacturer, model, driver" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "There is no medium or it is write-protected for device %s.\n" "Please insert one." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Printer on NetWare server" msgstr "" #: ../../any.pm:1 #, c-format msgid "Give the ram size in MB" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Friday" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Disconnection from Internet complete." msgstr "" #: ../../any.pm:1 #, c-format msgid "Real name" msgstr "" #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "done" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please uncheck or remove it on next time." msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Higher" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the partitions you want to format" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "" "No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n" "\n" "\n" "You can visit our hardware database at:\n" "\n" "\n" "http://www.linux-mandrake.com/en/hardware.php3" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't find %s on %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Japanese 106 keys" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to share your scanner(s)." msgstr "" #: ../../standalone/drakTermServ:1 ../../standalone/drakTermServ:1 #, c-format msgid "This will take a few minutes." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Burkina Faso" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "June" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Use scanners on remote computers" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Delete selected rule" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Accessing printers on remote CUPS servers" msgstr "" #: ../../any.pm:1 #, c-format msgid "Insert a floppy in %s" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Maldives" msgstr "" #: ../../any.pm:1 #, c-format msgid "compact" msgstr "" #: ../../common.pm:1 #, c-format msgid "1 minute" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "type: fat" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "on channel %d id %d\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Laos" msgstr "" #: ../advertising/04-configuration.pl:1 #, c-format msgid "Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful tool to fully adapt your computer to the use you make of it. Configure and customize elements such as the security level, the peripherals (screen, mouse, keyboard...), the Internet connection and much more!" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Activate/Disable ethernet cards promiscuity check." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "There is no FAT partition to resize (or not enough space left)" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Up" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Firewall" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Area:" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "(E)IDE/ATA controllers" msgstr "" #: ../../fs.pm:1 #, c-format msgid "All I/O to the file system should be done synchronously." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer Server" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Custom configuration" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "" "Please indicate where the installation image will be available.\n" "\n" "If you do not have an existing directory, please copy the CD or DVD contents.\n" "\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Saint Pierre and Miquelon" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "September" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "saving Bootsplash theme..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Portugal" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "Do you have another one?" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", printing to %s" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Assign host name from DHCP address" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to normal mode" msgstr "" #: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Generic" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Cylinder %d to %d\n" "" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "YOUR TEXT HERE" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "New profile..." msgstr "" #: ../../modules/interactive.pm:1 ../../standalone/draksec:1 #, c-format msgid "NONE" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Which disk do you want to move it to?" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Display logo on Console" msgstr "" #: ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Windows Domain" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Saami (norwegian)" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "Interface %s (on network %s)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "INFO" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Wallis and Futuna" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Need to create /etc/dhcpd.conf first!" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Is FPU present" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "No additional information\n" "about this service, sorry." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "" "There are no scanners found which are available on your system.\n" "" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build Single NIC -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Marshall Islands" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Is this correct?" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Windows (FAT32)" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Root password" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Build All Kernels -->" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "DVDRAM device" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, report unowned files." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Version: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Server IP missing!" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Suriname" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "Use a floppy" msgstr "" #: ../../any.pm:1 #, c-format msgid "Enable ACPI" msgstr "" #: ../../fs.pm:1 #, c-format msgid "Give write access to ordinary users" msgstr "" #: ../../help.pm:1 #, c-format msgid "Graphical Environment" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gibraltar" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Do nothing" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Delete Client" msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Filesystem type: " msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Starting network..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Vietnam" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "/_Fields description" msgstr "" #: ../advertising/10-security.pl:1 #, c-format msgid "Optimize your security by using Mandrake Linux" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" "\n" "\n" " Thanks:\n" "\t- LTSP Project http://www.ltsp.org\n" "\t- Michael Brown \n" "\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbug:1 ../../standalone/drakconnect:1 ../../standalone/drakfont:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/harddrake2:1 #, c-format msgid "Help" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check if the network devices are in promiscuous mode" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Your personal phone number" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Which size do you want to keep for Windows on" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Username required" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Device" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Depending on the default language you chose in Section , DrakX will\n" "automatically select a particular type of keyboard configuration. However,\n" "you may not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may have a Swiss\n" "keyboard. Or if you speak English but are located in Quebec, you may find\n" "yourself in the same situation where your native language and keyboard do\n" "not match. In either case, this installation step will allow you to select\n" "an appropriate keyboard from a list.\n" "\n" "Click on the \"%s\" button to be presented with the complete list of\n" "supported keyboards.\n" "\n" "If you choose a keyboard layout based on a non-Latin alphabet, the next\n" "dialog will allow you to choose the key binding that will switch the\n" "keyboard between the Latin and non-Latin layouts." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "URI: %s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Valid user list changed, rewriting config file." msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "mkinitrd optional arguments" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "Surf the Web with Mozilla or Konqueror, read your mail with Evolution or Kmail, create your documents with OpenOffice.org." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Protocol for the rest of the world" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Print test pages" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Activate now" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "64 MB or more" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Please select the device where your %s is attached" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "Not formatted\n" "" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "Periodic Checks" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "PXE Server Configuration" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup the system files before:" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client." msgstr "" #: ../../any.pm:1 #, c-format msgid "First floppy drive" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/logdrake:1 #, c-format msgid "/File/_Quit" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Choose the new size" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Media class" msgstr "" #: ../../standalone/XFdrake:1 #, c-format msgid "You need to log out and back in again for changes to take effect" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not known by this version of Scannerdrake." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Faroe Islands" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Restart XFS" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add host/network" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake will not be started now." msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Model name" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Albania" msgstr "" #: ../../lang.pm:1 #, c-format msgid "British Indian Ocean Territory" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Normal Mode" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No CD-R/DVD-R in drive!" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer connection type" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No network adapter on your system!" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Network %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Malayalam" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Option %s out of range!" msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Connect %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Restarting CUPS..." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "" #: ../../../move/move.pm:1 ../../../move/move.pm:1 #, c-format msgid "Continue without USB key" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run chkrootkit checks." msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Connection Configuration" msgstr "" #: ../../harddrake/v4l.pm:1 ../../harddrake/v4l.pm:1 #, c-format msgid "Unknown|Generic" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Bugs may have been\n" "fixed, security issues resolved. To allow you to benefit from these\n" "updates, you are now able to download them from the Internet. Check \"%s\"\n" "if you have a working Internet connection, or \"%s\" if you prefer to\n" "install updated packages later.\n" "\n" "Choosing \"%s\" will display a list of places from which updates can be\n" "retrieved. You should choose one nearer to you. A package-selection tree\n" "will appear: review the selection, and press \"%s\" to retrieve and install\n" "the selected package(s), or \"%s\" to abort." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Myanmar" msgstr "" #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/draksplash:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Quit" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Auto allocate" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Check bad blocks?" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Other MultiMedia devices" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "burner" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Bug Description/System Information" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " (Default is all users)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "No remote machines" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Welcome to the Printer Setup Wizard\n" "\n" "This wizard will help you to install your printer(s) connected to this computer.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n" "\n" " Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now." msgstr "" #: ../../any.pm:1 #, c-format msgid "Authentication NIS" msgstr "" #: ../../any.pm:1 #, c-format msgid "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing currently enabled" msgstr "" #: ../../lang.pm:1 #, c-format msgid "United Arab Emirates" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_0" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Disable Local Config" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Thailand" msgstr "" #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Card IO_1" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Search:" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Kazakhstan" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Routers:" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Write" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Display all available remote CUPS printers" msgstr "" #: ../../install_steps_newt.pm:1 #, c-format msgid "Mandrake Linux Installation %s" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "Unknown driver" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Thai keyboard" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Bouvet Island" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Dialup options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "If no port is given, 631 will be taken as default." msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Per client system configuration files:\n" " \tThrough clusternfs, each diskless client can have its own unique configuration files\n" " \ton the root filesystem of the server. By allowing local client hardware configuration, \n" " \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n" " \t/etc/sysconfig/keyboard on a per-client basis.\n" "\n" " Note: Enabling local client hardware configuration does enable root login to the terminal \n" " server on each client machine that has this feature enabled. Local configuration can be\n" " turned back off, retaining the configuration files, once the client machine is configured." msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Polish" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Online" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Network by webdav.\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", multi-function device on a parallel port" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 #, c-format msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool." msgstr "" #: ../../network/network.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakgw:1 #, c-format msgid "Netmask" msgstr "" #: ../../diskdrake/hd_gtk.pm:1 #, c-format msgid "No hard drives found" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "2 buttons" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech CC Series" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "What kind is your ISDN connection?" msgstr "" #: ../../any.pm:1 ../../any.pm:1 ../../any.pm:1 #, c-format msgid "Label" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Save on floppy" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check open ports" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Edit selected printer" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer auto-detection" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "Which of the following is your ISDN card?" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP networks.\n" "This service provides NFS server functionality, which is configured via the\n" "/etc/exports file." msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Msec" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "" "=> Notice, a label changed:\n" "%s" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Number of capture buffers:" msgstr "" #: ../../interactive/stdio.pm:1 #, c-format msgid "Your choice? (0/1, default `%s') " msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a file system).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "it.\n" "\n" "Click on \"%s\" when you are ready to format partitions.\n" "\n" "Click on \"%s\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"%s\" if you wish to select partitions that will be checked for\n" "bad blocks on the disk." msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "French" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTY)" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Allow X Window connections" msgstr "" #: ../../standalone/service_harddrake:1 #, c-format msgid "Hardware probing in progress" msgstr "" #: ../../network/shorewall.pm:1 ../../standalone/drakgw:1 #, c-format msgid "Net Device" msgstr "" #: ../../install_steps_interactive.pm:1 ../../steps.pm:1 #, c-format msgid "Summary" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." msgstr "" #: ../../network/netconnect.pm:1 ../../network/tools.pm:1 #, c-format msgid "Next" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "" "You can't install the bootloader on a %s partition\n" "" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "CHAP" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Puerto Rico" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "(bootp/dhcp/zeroconf)" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "" "\n" "Welcome.\n" "\n" "The parameters of the auto-install are available in the sections on the left" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "" "package 'ImageMagick' is required to be able to complete configuration.\n" "Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Telnet server" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "" "The following packages will be removed to allow upgrading your system: %s\n" "\n" "\n" "Do you really want to remove these packages?\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Anguilla" msgstr "" #: ../../any.pm:1 #, c-format msgid "NIS Domain" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Antarctica" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- User Files:\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Mount options" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Jamaica" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Assign raw devices to block devices (such as hard drive\n" "partitions), for the use of applications such as Oracle or DVD players" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Please wait, preparing installation..." msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Czech (QWERTZ)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Track network card id (useful for laptops)" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "The port number should be an integer!" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "You must choose an image file first!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore from Hard Disk." msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Add to LVM" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "DNS server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Trinidad and Tobago" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "LPD and LPRng do not support IPP printers.\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host name or IP." msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Edit" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "simple" msgstr "" #: ../../help.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Clear all" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "No test pages" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Falkland Islands (Malvinas)" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Adapter %s: %s" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Boot disk creation" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Monday" msgstr "" #: ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Unknown model" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check files/directories writable by everybody." msgstr "" #: ../../help.pm:1 #, c-format msgid "authentication" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Now" msgstr "" #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "/_File" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Removing printer from Star Office/OpenOffice.org/GIMP" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Launch packet filtering for Linux kernel 2.2 series, to set\n" "up a firewall to protect your machine from network attacks." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Editable" msgstr "" #: ../../network/ethernet.pm:1 #, c-format msgid "Which dhcp client do you want to use ? (default is dhcp-client)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Tamil (ISCII-layout)" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mayotte" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set shell commands history size. A value of -1 means unlimited." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "" "%d KB\n" "" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Creating auto install floppy..." msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Searching for scanners ..." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Russia" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Partitioning" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "ethernet card(s) detected" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Syslog" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Can't create catalog!" msgstr "" #: ../advertising/11-mnf.pl:1 #, c-format msgid "Complete your security setup with this very easy-to-use software which combines high performance components such as a firewall, a virtual private network (VPN) server and client, an intrusion detection system and a traffic manager." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "Not enough free space for auto-allocating" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Set root password" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Enable IP spoofing protection" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"." msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Group :" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet connection configuration" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Add the name as an exception to the handling of password aging by msec." msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "USB" msgstr "" #: ../../standalone/drakxtv:1 #, c-format msgid "Scanning for TV channels" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Kernel:" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 #, c-format msgid "/_About..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Bengali" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Preference: " msgstr "" #: ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services: %d activated for %d registered" msgstr "" #: ../../any.pm:1 #, c-format msgid "Create a bootdisk" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Solomon Islands" msgstr "" #: ../../standalone/mousedrake:1 #, c-format msgid "Please test your mouse:" msgstr "" #: ../../modules/interactive.pm:1 #, c-format msgid "(module %s)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Workgroup" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printer host name or IP" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "down" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Host Path or Module" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Show current interface configuration" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Add Printer" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "" "The argument specifies if clients are authorized to connect\n" "to the X server from the network on the tcp port 6000 or not." msgstr "" #: ../../help.pm:1 #, c-format msgid "Development" msgstr "" #: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Done" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "Web Server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Chile" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tDo not include System Files\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n" "\n" "Do not use \"scannerdrake\" for this device!" msgstr "" #: ../../any.pm:1 #, c-format msgid "(already added %s)" msgstr "" #: ../../any.pm:1 #, c-format msgid "Bootloader installation in progress" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", using command %s" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Alt and Shift keys simultaneously" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Flags" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add/Del Users" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Host/network IP address missing." msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "weekly" msgstr "" #: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 #, c-format msgid "Settings" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "The entered host/network IP is not correct.\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Create/Transfer backup keys for SSH" msgstr "" #: ../../any.pm:1 #, c-format msgid "Here is the full list of available countries" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Alternative test page (A4)" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Wait please" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "PAP" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup user files" msgstr "" #: ../../diskdrake/dav.pm:1 #, c-format msgid "New" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"Root\" is the system\n" "administrator and is the only user authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if the password that you chose too easy. As you\n" "can see, you are not forced to enter a password, but we strongly advise you\n" "against this. GNU/Linux is just as prone to operator error as any other\n" "operating system. Since \"root\" can overcome all limitations and\n" "unintentionally erase all data on partitions by carelessly accessing the\n" "partitions themselves, it is important that it be difficult to become\n" "\"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password -- it makes it far\n" "too easy to compromise a system.\n" "\n" "One caveat -- do not make the password too long or complicated because you\n" "must be able to remember it!\n" "\n" "The password will not be displayed on screen as you type it in. To reduce\n" "the chance of a blind typing error you will need to enter the password\n" "twice. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will be the one you will have use the first time you\n" "connect.\n" "\n" "If you wish access to this computer to be controlled by an authentication\n" "server, click the \"%s\" button.\n" "\n" "If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" "services, select the appropriate one for \"%s\". If you do not know which\n" "one to use, you should ask your network administrator.\n" "\n" "If you happen to have problems with remembering passwords, if your computer\n" "will never be connected to the internet or that you absolutely trust\n" "everybody who uses your computer, you can choose to have \"%s\"." msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Name resolution spoofing protection" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "At this point, DrakX will allow you to choose the security level desired\n" "for the machine. As a rule of thumb, the security level should be set\n" "higher if the machine will contain crucial data, or if it will be a machine\n" "directly exposed to the Internet. The trade-off of a higher security level\n" "is generally obtained at the expense of ease of use.\n" "\n" "If you do not know what to choose, stay with the default option." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Load from floppy" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "The following printer was auto-detected. " msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Uses command %s" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Boot Floppy" msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "Norwegian" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Searching for new scanners ..." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Apache World Wide Web Server" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "stepping of the cpu (sub model (generation) number)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "select path to restore (instead of /)" msgstr "" #: ../../standalone/draksplash:1 ../../standalone/draksplash:1 #, c-format msgid "Configure bootsplash picture" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Georgia" msgstr "" #: ../../lang.pm:1 #, c-format msgid "China" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" " (Make sure that all your printers are connected and turned on).\n" "" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Reading data of installed printers..." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid " Erase Now " msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "server" msgstr "" #: ../../install_any.pm:1 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "yes means the processor has an arithmetic coprocessor" msgstr "" #: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Please Wait... Applying the configuration" msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm:1 #, c-format msgid "Welcome to GRUB the operating system chooser!" msgstr "" #: ../../bootloader.pm:1 #, c-format msgid "Grub" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "SCSI controllers" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "Choosing a display manager" msgstr "" #: ../../network/ethernet.pm:1 ../../network/network.pm:1 #, c-format msgid "Zeroconf Host name" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Custom setup/crontab entry:" msgstr "" #: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Configure CUPS printing system" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Ecuador" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Add an item" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The printers on this machine are available to other computers" msgstr "" #: ../../lang.pm:1 #, c-format msgid "China (Hong Kong)" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "I can't find needed image file `%s'." msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "Invalid port given: %s.\n" "The proper format is \"port/tcp\" or \"port/udp\", \n" "where port is between 1 and 65535." msgstr "" #: ../../any.pm:1 #, c-format msgid "Shell" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Sao Tome and Principe" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "PCI" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Azerbaidjani (latin)" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Package not installed" msgstr "" #: ../../lang.pm:1 #, c-format msgid "American Samoa" msgstr "" #: ../advertising/12-mdkexpert.pl:1 #, c-format msgid "Become a MandrakeExpert" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Protocol" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Copy fonts on your system" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Harddrake help" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Bogomips" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Mandrake Terminal Server Configuration" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" " DrakBackup Report Details\n" "\n" "\n" "" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Restore all backups" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid " on parallel port #%s" msgstr "" #: ../../security/help.pm:1 #, c-format msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, check open ports." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "This may take a moment to erase the media." msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "You can't select/unselect this package" msgstr "" #: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1 ../../network/modem.pm:1 ../../network/modem.pm:1 ../../standalone/drakfloppy:1 #, c-format msgid "Warning" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Other Files:\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote host name" msgstr "" #: ../../any.pm:1 #, c-format msgid "access to X programs" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Computing the size of the Windows partition" msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "/_Refresh" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 ../../network/tools.pm:1 ../../standalone/drakxtv:1 #, c-format msgid "Italy" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Cayman Islands" msgstr "" #: ../../fs.pm:1 ../../partition_table.pm:1 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Name of printer" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "disable" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do it!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "%s not responding" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Select model manually" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Format" msgstr "" #: ../../network/adsl.pm:1 #, c-format msgid "" "The most common way to connect with adsl is pppoe.\n" "Some connections use pptp, a few use dhcp.\n" "If you don't know, choose 'use pppoe'" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Various" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Zip" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Alt key" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Load setting" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "\n" "Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list." msgstr "" #: ../../standalone/printerdrake:1 #, c-format msgid "Set selected printer as the default printer" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" #: ../../printer/data.pm:1 #, c-format msgid "PDQ" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Albanian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Lithuania" msgstr "" #: ../../any.pm:1 #, c-format msgid "Compact" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Detected model: %s %s" msgstr "" #: ../advertising/03-software.pl:1 #, c-format msgid "MandrakeSoft has selected the best software for you" msgstr "" #: ../../any.pm:1 #, c-format msgid "Local files" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "maybe" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Panama" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Can't open %s!" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 #, c-format msgid "Monitor" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n" "\n" "We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n" "\n" "Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n" "\n" "Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n" "\n" "" msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "65 thousand colors (16 bits)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Save on Hard drive on path: %s\n" "" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Remove fonts on your system" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" "\n" "Do you want an automatic re-configuration?\n" "\n" "You can do it manually but you need to know what you're doing." msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "Graphical interface at startup" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " adsl" msgstr "" #: ../../raid.pm:1 #, c-format msgid "" "Not enough partitions for RAID level %d\n" "" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "format of floppies supported by the drive" msgstr "" #: ../../network/tools.pm:1 #, c-format msgid "Firmware copy failed, file %s not found" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "local config: true" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it." msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 #, c-format msgid "Connected" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Macedonian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Mali" msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Bridges and system controllers" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "/File/_Save" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "No details" msgstr "" #: ../../pkgs.pm:1 #, c-format msgid "very nice" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Preview" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Remote Control" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Please select media for backup..." msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Wrong email" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "XFree86 server: %s\n" "" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Allow Thin Clients" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "/_Options" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Your printer model" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\n" "- Delete hard drive tar files after backup.\n" "" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "No CD or DVD image found, please copy the installation program and rpm files." msgstr "" #: ../advertising/04-configuration.pl:1 #, c-format msgid "Mandrake's multipurpose configuration tool" msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/logdrake:1 #, c-format msgid "Save" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "The %s is unsupported" msgstr "" #: ../../services.pm:1 #, c-format msgid "Load the drivers for your usb devices." msgstr "" #: ../../harddrake/data.pm:1 #, c-format msgid "Disk" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Enter a printer device URI" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "The success of MandrakeSoft is based upon the principle of Free Software. Your new operating system is the result of collaborative work of the worldwide Linux Community." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Israel" msgstr "" #: ../../lang.pm:1 #, c-format msgid "French Guiana" msgstr "" #: ../../lang.pm:1 #, c-format msgid "default:LTR" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "A command line must be entered!" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Select user manually" msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Transfer printer configuration" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to enable printing on the printers mentioned above?\n" "" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check additions/removals of suid root files" msgstr "" #: ../../any.pm:1 #, c-format msgid "" "For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are good." msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "%s (Port %s)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use network connection to backup" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "Kernel version" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "to make it simpler to manage the packages have been placed into groups of\n" "similar applications.\n" "\n" "Packages are sorted into groups corresponding to a particular use of your\n" "machine. Mandrake Linux has four predefined installations available. You\n" "can think of these installation classes as containers for various packages.\n" "You can mix and match applications from the various groups, so a\n" "``Workstation'' installation can still have applications from the\n" "``Development'' group installed.\n" "\n" " * \"%s\": if you plan to use your machine as a workstation, select one or\n" "more of the applications that are in the workstation group.\n" "\n" " * \"%s\": if plan on using your machine for programming, choose the\n" "appropriate packages from that group.\n" "\n" " * \"%s\": if your machine is intended to be a server, select which of the\n" "more common services you wish to install on your machine.\n" "\n" " * \"%s\": this is where you will choose your preferred graphical\n" "environment. At least one must be selected if you want to have a graphical\n" "interface available.\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you unselect all groups when performing a regular\n" "installation (as opposed to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"%s\": install the minimum number of packages possible to have a\n" "working graphical desktop.\n" "\n" " * \"%s\": installs the base system plus basic utilities and their\n" "documentation. This installation is suitable for setting up a server.\n" "\n" " * \"%s\": will install the absolute minimum number of packages necessary\n" "to get a working Linux system. With this installation you will only have a\n" "command line interface. The total size of this installation is about 65\n" "megabytes.\n" "\n" "You can check the \"%s\" box, which is useful if you are familiar with the\n" "packages being offered or if you want to have total control over what will\n" "be installed.\n" "\n" "If you started the installation in \"%s\" mode, you can unselect all groups\n" "to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../any.pm:1 ../../help.pm:1 #, c-format msgid "Accept user" msgstr "" #: ../../help.pm:1 ../../diskdrake/dav.pm:1 #, c-format msgid "Server" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Left Shift key" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " local network" msgstr "" #: ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 #, c-format msgid "" "Bad choice, try again\n" "" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Syslog reports to console 12" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Search new servers" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Heard and McDonald Islands" msgstr "" #: ../../harddrake/sound.pm:1 #, c-format msgid "No alternative driver" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Toggle to expert mode" msgstr "" #: ../../printer/cups.pm:1 #, c-format msgid "(on this machine)" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "Gateway address should be in format 1.2.3.4" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "\"%s\" based winmodem detected, do you want to install needed software ?" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Looking at packages already installed..." msgstr "" #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 #, c-format msgid "Use Differential Backups" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Driver" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "Linuxconf will sometimes arrange to perform various tasks\n" "at boot-time to maintain the system configuration." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "DVD-R device" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Printer on remote lpd server" msgstr "" #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 #, c-format msgid "" "Before installing any fonts, be sure that you have the right to use and install them on your system.\n" "\n" "-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server." msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" "detected and installed in the bootloader menu. If this is not the case, you\n" "can add an entry by hand in this screen. Be careful to choose the correct\n" "parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt.\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information.\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second increments\n" "before your default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt.\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt.\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Wednesday" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Germany" msgstr "" #: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1 #, c-format msgid "Austria" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "No mouse" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Choose your CD/DVD media size (MB)" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Check permissions of files in the users' home" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../ugtk2.pm:1 #, c-format msgid "Collapse Tree" msgstr "" #: ../../standalone/drakautoinst:1 #, c-format msgid "Auto Install Configurator" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure networking" msgstr "" #: ../../any.pm:1 #, c-format msgid "Where do you want to install the bootloader?" msgstr "" #: ../../help.pm:1 #, c-format msgid "" "Your choice of preferred language will affect the language of the\n" "documentation, the installer and the system in general. Select first the\n" "region you are located in, and then the language you speak.\n" "\n" "Clicking on the \"%s\" button will allow you to select other languages to\n" "be installed on your workstation, thereby installing the language-specific\n" "files for system documentation and applications. For example, if you will\n" "host users from Spain on your machine, select English as the default\n" "language in the tree view and \"%s\" in the Advanced section.\n" "\n" "Note that you're not limited to choosing a single additional language. You\n" "may choose several ones, or even install them all by selecting the \"%s\"\n" "box. Selecting support for a language means translations, fonts, spell\n" "checkers, etc. for that language will be installed. Additionally, the\n" "\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" "however that this is an experimental feature. If you select different\n" "languages requiring different encoding the unicode support will be\n" "installed anyway.\n" "\n" "To switch between the various languages installed on the system, you can\n" "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" "language used by the entire system. Running the command as a regular user\n" "will only change the language settings for that particular user." msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "The %s is not supported by this version of Mandrake Linux." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "tape" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP client" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "List users on display managers (kdm and gdm)" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../../partition_table.pm:1 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "" "I can't read the partition table of device %s, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to lose all the partitions?\n" "" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Find Package" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Are you sure that you want to set up printing on this machine?\n" "" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "New devfs device" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Boot Style Configuration" msgstr "" #: ../../help.pm:1 #, c-format msgid "Automatic time synchronization" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup files not found at %s." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Armenian (phonetic)" msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "Card model:" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Thin Client" msgstr "" #: ../advertising/01-thanks.pl:1 #, c-format msgid "Thank you for choosing Mandrake Linux 9.2" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Start Server" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Turkmenistan" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "All remote machines" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Install themes" msgstr "" #: ../../help.pm:1 #, c-format msgid "Espanol" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "Preparing installation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Edit selected host/network" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "Add User -->" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Nauru" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "True Type fonts installation" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Auto-detect printers connected directly to the local network" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "LAN configuration" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "hard disk model" msgstr "" #: ../../standalone/drakTermServ:1 #, c-format msgid "" " - Maintain /etc/exports:\n" " \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n" " \tsets up the correct entry to allow anonymous access to the root filesystem from\n" " \tdiskless clients.\n" "\n" " \tA typical exports entry for clusternfs is:\n" " \t\t\n" " \t/\t\t\t\t\t(ro,all_squash)\n" " \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n" "\t\t\t\n" " \tWith SUBNET/MASK being defined for your network." msgstr "" #: ../../fsedit.pm:1 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Get Windows Fonts" msgstr "" #: ../../mouse.pm:1 #, c-format msgid "Mouse Systems" msgstr "" #: ../../standalone/drakclock:1 #, c-format msgid "" "Your computer can synchronize its clock\n" " with a remote time server using NTP" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Iranian" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Croatia" msgstr "" #: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 #, c-format msgid "Gateway:" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Add server" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Remote printer name" msgstr "" #: ../advertising/10-security.pl:1 #, c-format msgid "MandrakeSoft has designed exclusive tools to create the most secured Linux version ever: Draksec, a system security management tool, and a strong firewall are teamed up together in order to highly reduce hacking risks." msgstr "" #: ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 #, c-format msgid "Device: " msgstr "" #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 ../../standalone/printerdrake:1 #, c-format msgid "Printerdrake" msgstr "" #: ../../install_steps_interactive.pm:1 #, c-format msgid "License agreement" msgstr "" #: ../../standalone/draksec:1 #, c-format msgid "System Options" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Please choose the desired security level" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "" "This host is already in the list, it cannot be added again.\n" "" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid ", USB printer" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "" "Unable to properly close mkbootdisk:\n" "\n" "%s" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Incremental backups only save files that have changed or are new since the last backup." msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Choose the applications that will support the fonts:" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Configure X" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "hd" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 ../../standalone/scannerdrake:1 #, c-format msgid "Congratulations!" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Use owner id for execution" msgstr "" #: ../../security/l10n.pm:1 #, c-format msgid "Allow remote root login" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Down" msgstr "" #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 #, c-format msgid "Raw printer (No driver)" msgstr "" #: ../../network/modem.pm:1 #, c-format msgid "Install rpm" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use the command \"%s \" or a graphical printing tool: \"xpp \" or \"kprinter \". The graphical tools allow you to choose the printer and to modify the option settings easily.\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "Time remaining " msgstr "" #: ../../keyboard.pm:1 ../../keyboard.pm:1 #, c-format msgid "UK keyboard" msgstr "" #: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 #, c-format msgid "Unmount" msgstr "" #: ../../mouse.pm:1 ../../mouse.pm:1 #, c-format msgid "Microsoft Explorer" msgstr "" #: ../../standalone/drakfont:1 #, c-format msgid "Uninstall Fonts" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Please wait, detecting and configuring devices..." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "German (no dead keys)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\tSend mail to %s\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Transferring %s..." msgstr "" #: ../../Xconfig/resolution_and_depth.pm:1 #, c-format msgid "32 thousand colors (15 bits)" msgstr "" #: ../../any.pm:1 #, c-format msgid "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Gambia" msgstr "" #: ../../standalone/drakbug:1 #, c-format msgid "Mandrake Control Center" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../../move/move.pm:1 #, c-format msgid "Reboot" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device" msgstr "" #: ../../network/drakfirewall.pm:1 #, c-format msgid "" "You can enter miscellaneous ports. \n" "Valid examples are: 139/tcp 139/udp.\n" "Have a look at /etc/services for information." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Tape \n" "" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "No browser is installed on your system, Please install one if you want to browse the help system" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Remember this password" msgstr "" #: ../../install_steps_gtk.pm:1 #, c-format msgid "due to unsatisfied %s" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "Internet Connection Sharing is now enabled." msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "" "\t-Network by SSH.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed." msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid " cable" msgstr "" #: ../../help.pm:1 ../../install_interactive.pm:1 #, c-format msgid "Use the free space on the Windows partition" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "%s found on %s, configure it automatically?" msgstr "" #: ../../Xconfig/various.pm:1 #, c-format msgid "" "XFree86 driver: %s\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "This host/network is already in the list, it cannot be added again.\n" "" msgstr "" #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 #, c-format msgid "Choose the packages you want to install" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Papua New Guinea" msgstr "" #: ../../printer/main.pm:1 #, c-format msgid "Multi-function device on a parallel port" msgstr "" #: ../../../move/tree/mdk_totem:1 #, c-format msgid "Busy files" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Serbian (cyrillic)" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Enter the directory where backups are stored" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "Make kernel message quiet by default" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" "as the default printer?" msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "The DHCP end range" msgstr "" #: ../../any.pm:1 #, c-format msgid "Creating bootdisk..." msgstr "" #: ../../standalone/net_monitor:1 #, c-format msgid "Wait please, testing your connection..." msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "Bringing down the network" msgstr "" #: ../../network/modem.pm:1 ../../standalone/drakconnect:1 #, c-format msgid "Login ID" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "NFS is a popular protocol for file sharing across TCP/IP\n" "networks. This service provides NFS file locking functionality." msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "DHCP Client" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version: %s\n" "Author: Thierry Vignaud <tvignaud@mandrakesoft.com>\n" "\n" "" msgstr "" #: ../../standalone/drakgw:1 ../../standalone/drakgw:1 #, c-format msgid "dismiss" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "" #: ../../standalone/drakfloppy:1 #, c-format msgid "omit raid modules" msgstr "" #: ../../services.pm:1 #, c-format msgid "" "lpd is the print daemon required for lpr to work properly. It is\n" "basically a server that arbitrates print jobs to printer(s)." msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Irish" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Sunday" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Internet Connection Configuration" msgstr "" #: ../../modules/parameters.pm:1 #, c-format msgid "comma separated numbers" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")" msgstr "" #: ../../standalone/drakperm:1 #, c-format msgid "Move selected rule up one level" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "" "The following scanner\n" "\n" "%s\n" "is available on your system.\n" "" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "" #: ../../install_interactive.pm:1 #, c-format msgid "I can't find any room for installing" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Default printer" msgstr "" #: ../../network/netconnect.pm:1 #, c-format msgid "" "You have configured multiple ways to connect to the Internet.\n" "Choose the one you want to use.\n" "\n" "" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Modify RAID" msgstr "" #: ../../network/isdn.pm:1 #, c-format msgid "I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen." msgstr "" #: ../../any.pm:1 #, c-format msgid "Add user" msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "" "RAID-disks %s\n" "" msgstr "" #: ../../lang.pm:1 #, c-format msgid "Liberia" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Could not install the packages needed to set up a scanner with Scannerdrake." msgstr "" #: ../../standalone/drakgw:1 #, c-format msgid "" "Please enter the name of the interface connected to the internet.\n" "\n" "Examples:\n" "\t\tppp+ for modem or DSL connections, \n" "\t\teth0, or eth1 for cable connection, \n" "\t\tippp+ for a isdn connection.\n" "" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Choose your keyboard" msgstr "" #: ../../steps.pm:1 #, c-format msgid "Format partitions" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Automatic correction of CUPS configuration" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "Running \"%s\" ..." msgstr "" #: ../../harddrake/v4l.pm:1 #, c-format msgid "enable radio support" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Scanner sharing to hosts: " msgstr "" #: ../../diskdrake/interactive.pm:1 #, c-format msgid "Loopback file name: %s" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Please choose the printer to which the print jobs should go." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Do not transfer printers" msgstr "" #: ../../help.pm:1 #, c-format msgid "Delay before booting the default image" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Use Hard Disk to backup" msgstr "" #: ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 #, c-format msgid "Configure" msgstr "" #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 #, c-format msgid "Scannerdrake" msgstr "" #: ../../standalone/drakconnect:1 #, c-format msgid "Warning, another Internet connection has been detected, maybe using your network" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Backup Users" msgstr "" #: ../../network/network.pm:1 #, c-format msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one." msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "Select Printer Spooler" msgstr "" #: ../../standalone/drakboot:1 #, c-format msgid "Create new theme" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "Mandrake Tools Explanation" msgstr "" #: ../../standalone/drakpxe:1 #, c-format msgid "No image found" msgstr "" #: ../../install_steps.pm:1 #, c-format msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n" "" msgstr "" #: ../advertising/06-development.pl:1 #, c-format msgid "Mandrake Linux 9.2: the ultimate development platform" msgstr "" #: ../../standalone/scannerdrake:1 #, c-format msgid "Detected model: %s" msgstr "" #: ../../standalone/logdrake:1 #, c-format msgid "\"%s\" is not a valid email!" msgstr "" #: ../../standalone/drakedm:1 #, c-format msgid "" "X11 Display Manager allows you to graphically log\n" "into your system with the X Window System running and supports running\n" "several different X sessions on your local machine at the same time." msgstr "" #: ../../security/help.pm:1 #, c-format msgid "if set to yes, run the daily security checks." msgstr "" #: ../../lang.pm:1 #, c-format msgid "Azerbaijan" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "Device name to use for backup" msgstr "" #: ../../standalone/drakbackup:1 #, c-format msgid "No tape in %s!" msgstr "" #: ../../standalone/drakhelp:1 #, c-format msgid "" " --doc - link to another web page ( for WM welcome frontend)\n" "" msgstr "" #: ../../keyboard.pm:1 #, c-format msgid "Dvorak (US)" msgstr "" #: ../../standalone/harddrake2:1 #, c-format msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../printer/printerdrake.pm:1 #, c-format msgid "How is the printer connected?" msgstr "" #: ../../security/level.pm:1 #, c-format msgid "Security level" msgstr "" #: ../../standalone/draksplash:1 #, c-format msgid "final resolution" msgstr "" #: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 #, c-format msgid "Services" msgstr "" #: ../../../move/move.pm:1 #, c-format msgid "Auto configuration" msgstr "" #: ../../Xconfig/card.pm:1 #, c-format msgid "4 MB" msgstr "" #: ../../share/compssUsers:999 msgid "Office Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Game station" msgstr "" #: ../../share/compssUsers:999 msgid "Amusement programs: arcade, boards, strategy, etc" msgstr "" #: ../../share/compssUsers:999 msgid "Multimedia station" msgstr "" #: ../../share/compssUsers:999 msgid "Sound and video playing/editing programs" msgstr "" #: ../../share/compssUsers:999 msgid "Internet station" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer (client)" msgstr "" #: ../../share/compssUsers:999 msgid "Clients for different protocols including ssh" msgstr "" #: ../../share/compssUsers:999 msgid "Configuration" msgstr "" #: ../../share/compssUsers:999 msgid "Tools to ease the configuration of your computer" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "Scientific applications such as gnuplot" msgstr "" #: ../../share/compssUsers:999 msgid "Console Tools" msgstr "" #: ../../share/compssUsers:999 msgid "Editors, shells, file tools, terminals" msgstr "" #: ../../share/compssUsers:999 msgid "KDE Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools" msgstr "" #: ../../share/compssUsers:999 msgid "Gnome Workstation" msgstr "" #: ../../share/compssUsers:999 msgid "A graphical environment with user-friendly set of applications and desktop tools" msgstr "" #: ../../share/compssUsers:999 msgid "Other Graphical Desktops" msgstr "" #: ../../share/compssUsers:999 msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" msgstr "" #: ../../share/compssUsers:999 msgid "C and C++ development libraries, programs and include files" msgstr "" #: ../../share/compssUsers:999 msgid "Documentation" msgstr "" #: ../../share/compssUsers:999 msgid "Books and Howto's on Linux and Free Software" msgstr "" #: ../../share/compssUsers:999 msgid "LSB" msgstr "" #: ../../share/compssUsers:999 msgid "Linux Standard Base. Third party applications support" msgstr "" #: ../../share/compssUsers:999 msgid "Web/FTP" msgstr "" #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "" #: ../../share/compssUsers:999 msgid "Mail" msgstr "" #: ../../share/compssUsers:999 msgid "Postfix mail server" msgstr "" #: ../../share/compssUsers:999 msgid "Database" msgstr "" #: ../../share/compssUsers:999 msgid "PostgreSQL or MySQL database server" msgstr "" #: ../../share/compssUsers:999 msgid "Firewall/Router" msgstr "" #: ../../share/compssUsers:999 msgid "Internet gateway" msgstr "" #: ../../share/compssUsers:999 msgid "DNS/NIS " msgstr "" #: ../../share/compssUsers:999 msgid "Domain Name and Network Information Server" msgstr "" #: ../../share/compssUsers:999 msgid "Network Computer server" msgstr "" #: ../../share/compssUsers:999 msgid "NFS server, SMB server, Proxy server, ssh server" msgstr "" #: ../../share/compssUsers:999 msgid "Set of tools to read and send mail and news and to browse the Web" msgstr ""