# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"POT-Creation-Date: 2000-01-02 00:33+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: ENCODING\n"

#: ../Xconfigurator.pm_.c:159
msgid "Graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:159
msgid "Select a graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:160
msgid "Choose a X server"
msgstr ""

#: ../Xconfigurator.pm_.c:160
msgid "X server"
msgstr ""

#: ../Xconfigurator.pm_.c:181
msgid "Select the memory size of your graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:203
msgid "Choose options for server"
msgstr ""

#: ../Xconfigurator.pm_.c:221
msgid "Choose a monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:221
msgid "Monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:224
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""

#: ../Xconfigurator.pm_.c:231
msgid "Horizontal refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:231
msgid "Vertical refresh rate"
msgstr ""

#: ../Xconfigurator.pm_.c:272
msgid "Monitor not configured"
msgstr ""

#: ../Xconfigurator.pm_.c:275
msgid "Graphic card not configured yet"
msgstr ""

#: ../Xconfigurator.pm_.c:278
msgid "Resolutions not chosen yet"
msgstr ""

#: ../Xconfigurator.pm_.c:289
msgid "Do you want to test the configuration?"
msgstr ""

#: ../Xconfigurator.pm_.c:293
msgid "Warning: testing is dangerous on this graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:296
msgid "Test configuration"
msgstr ""

#: ../Xconfigurator.pm_.c:328
msgid "An error occurred:"
msgstr ""

#: ../Xconfigurator.pm_.c:330
msgid ""
"\n"
"try changing some parameters"
msgstr ""

#: ../Xconfigurator.pm_.c:351
#, c-format
msgid "(leaving in %d seconds)"
msgstr ""

#: ../Xconfigurator.pm_.c:355 ../my_gtk.pm_.c:425
msgid "Is this correct?"
msgstr ""

#: ../Xconfigurator.pm_.c:363
msgid "An error occurred, try changing some parameters"
msgstr ""

#: ../Xconfigurator.pm_.c:371 ../Xconfigurator.pm_.c:538
msgid "Automatic resolutions"
msgstr ""

#: ../Xconfigurator.pm_.c:372
msgid ""
"To find the available resolutions I will try different ones.\n"
"Your screen will blink...\n"
"You can switch if off if you want, you'll hear a beep when it's over"
msgstr ""

#: ../Xconfigurator.pm_.c:425 ../printerdrake.pm_.c:210
msgid "Resolution"
msgstr ""

#: ../Xconfigurator.pm_.c:460
msgid "Choose resolution and color depth"
msgstr ""

#: ../Xconfigurator.pm_.c:468
msgid "Show all"
msgstr ""

#: ../Xconfigurator.pm_.c:492
msgid "Resolutions"
msgstr ""

#: ../Xconfigurator.pm_.c:539
msgid ""
"I can try to find the available resolutions (eg: 800x600).\n"
"Sometimes, though, it may hang the machine.\n"
"Do you want to try?"
msgstr ""

#: ../Xconfigurator.pm_.c:544
msgid ""
"No valid modes found\n"
"Try with another video card or monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:758
#, c-format
msgid "Keyboard layout: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:759
#, c-format
msgid "Mouse type: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:760
#, c-format
msgid "Mouse device: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:761
#, c-format
msgid "Monitor: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:762
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:763
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:764
#, c-format
msgid "Graphic card: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:765
#, c-format
msgid "Graphic memory: %s kB\n"
msgstr ""

#: ../Xconfigurator.pm_.c:766
#, c-format
msgid "XFree86 server: %s\n"
msgstr ""

#: ../Xconfigurator.pm_.c:780
msgid "Preparing X-Window configuration"
msgstr ""

#: ../Xconfigurator.pm_.c:794
msgid "Change Monitor"
msgstr ""

#: ../Xconfigurator.pm_.c:795
msgid "Change Graphic card"
msgstr ""

#: ../Xconfigurator.pm_.c:796
msgid "Change Server options"
msgstr ""

#: ../Xconfigurator.pm_.c:797
msgid "Change Resolution"
msgstr ""

#: ../Xconfigurator.pm_.c:798
msgid "Automatical resolutions search"
msgstr ""

#: ../Xconfigurator.pm_.c:802
msgid "Show information"
msgstr ""

#: ../Xconfigurator.pm_.c:803
msgid "Test again"
msgstr ""

#: ../Xconfigurator.pm_.c:804
msgid "Quit"
msgstr ""

#: ../Xconfigurator.pm_.c:808
msgid "What do you want to do?"
msgstr ""

#: ../Xconfigurator.pm_.c:815
msgid "Forget the changes?"
msgstr ""

#: ../Xconfigurator.pm_.c:831
#, c-format
msgid "Please relog into %s to activate the changes"
msgstr ""

#: ../Xconfigurator.pm_.c:847
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr ""

#: ../Xconfigurator.pm_.c:850
msgid "X at startup"
msgstr ""

#: ../Xconfigurator.pm_.c:851
msgid ""
"I can set up your computer to automatically start X upon booting.\n"
"Would you like X to start when you reboot?"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:4
msgid "256 colors (8 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:5
msgid "32 thousand colors (15 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:6
msgid "65 thousand colors (16 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:7
msgid "16 million colors (24 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:8
msgid "4 billion colors (32 bits)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:96
msgid "256 kB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:97
msgid "512 kB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:98
msgid "1 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:99
msgid "2 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:100
msgid "4 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:101
msgid "8 MB"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:102
msgid "16 MB or more"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:106 ../Xconfigurator_consts.pm_.c:107
msgid "Standard VGA, 640x480 at 60 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:108
msgid "Super VGA, 800x600 at 56 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:109
msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:110
msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:111
msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:112
msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:113
msgid "High Frequency SVGA, 1024x768 at 70 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:114
msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:115
msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:116
msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:117
msgid "Monitor that can do 1600x1200 at 70 Hz"
msgstr ""

#: ../Xconfigurator_consts.pm_.c:118
msgid "Monitor that can do 1600x1200 at 76 Hz"
msgstr ""

#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370
msgid "Create"
msgstr ""

#: ../diskdrake.pm_.c:17
msgid "Unmount"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372
msgid "Delete"
msgstr ""

#: ../diskdrake.pm_.c:18
msgid "Format"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527
msgid "Resize"
msgstr ""

#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414
msgid "Type"
msgstr ""

#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430
msgid "Mount point"
msgstr ""

#: ../diskdrake.pm_.c:33
msgid "Write /etc/fstab"
msgstr ""

#: ../diskdrake.pm_.c:34
msgid "Toggle to expert mode"
msgstr ""

#: ../diskdrake.pm_.c:35
msgid "Toggle to normal mode"
msgstr ""

#: ../diskdrake.pm_.c:36
msgid "Restore from file"
msgstr ""

#: ../diskdrake.pm_.c:37
msgid "Save in file"
msgstr ""

#: ../diskdrake.pm_.c:38
msgid "Restore from floppy"
msgstr ""

#: ../diskdrake.pm_.c:39
msgid "Save on floppy"
msgstr ""

#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:563
#: ../install_steps_interactive.pm_.c:687 ../standalone/adduserdrake_.c:34
msgid "Done"
msgstr ""

#: ../diskdrake.pm_.c:43
msgid "Clear all"
msgstr ""

#: ../diskdrake.pm_.c:44
msgid "Format all"
msgstr ""

#: ../diskdrake.pm_.c:45
msgid "Auto allocate"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid "All primary partitions are used"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid "I can't add any more partition"
msgstr ""

#: ../diskdrake.pm_.c:48
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""

#: ../diskdrake.pm_.c:51
msgid "Rescue partition table"
msgstr ""

#: ../diskdrake.pm_.c:52
msgid "Undo"
msgstr ""

#: ../diskdrake.pm_.c:53
msgid "Write partition table"
msgstr ""

#: ../diskdrake.pm_.c:54
msgid "Reload"
msgstr ""

#: ../diskdrake.pm_.c:98
msgid "Empty"
msgstr ""

#: ../diskdrake.pm_.c:98
msgid "Ext2"
msgstr ""

#: ../diskdrake.pm_.c:98
msgid "FAT"
msgstr ""

#: ../diskdrake.pm_.c:98
msgid "Other"
msgstr ""

#: ../diskdrake.pm_.c:98
msgid "Swap"
msgstr ""

#: ../diskdrake.pm_.c:104
msgid "Filesystem types:"
msgstr ""

#: ../diskdrake.pm_.c:113
msgid "Details"
msgstr ""

#: ../diskdrake.pm_.c:127
msgid ""
"You have one big fat partition\n"
"(generally use by MicroSoft Dos/Windows).\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""

#: ../diskdrake.pm_.c:132
msgid "Please make a backup of your data first"
msgstr ""

#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458
#: ../diskdrake.pm_.c:487
msgid "Read carefully!"
msgstr ""

#: ../diskdrake.pm_.c:146
#, c-format
msgid "After %s partition %s,"
msgstr ""

#: ../diskdrake.pm_.c:146
msgid "all data on this partition will be lost"
msgstr ""

#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:185 ../install_steps.pm_.c:67
#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60
msgid "Error"
msgstr ""

#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610
msgid "Mount point: "
msgstr ""

#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228
msgid "Device: "
msgstr ""

#: ../diskdrake.pm_.c:191
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ""

#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231
msgid "Type: "
msgstr ""

#: ../diskdrake.pm_.c:193
#, c-format
msgid "Start: sector %s\n"
msgstr ""

#: ../diskdrake.pm_.c:194
#, c-format
msgid "Size: %s MB"
msgstr ""

#: ../diskdrake.pm_.c:196
#, c-format
msgid ", %s sectors"
msgstr ""

#: ../diskdrake.pm_.c:198
#, c-format
msgid "Cylinder %d to cylinder %d\n"
msgstr ""

#: ../diskdrake.pm_.c:199
msgid "Formatted\n"
msgstr ""

#: ../diskdrake.pm_.c:200
msgid "Not formatted\n"
msgstr ""

#: ../diskdrake.pm_.c:201
msgid "Mounted\n"
msgstr ""

#: ../diskdrake.pm_.c:202
#, c-format
msgid "RAID md%s\n"
msgstr ""

#: ../diskdrake.pm_.c:203
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""

#: ../diskdrake.pm_.c:205
#, c-format
msgid "Level %s\n"
msgstr ""

#: ../diskdrake.pm_.c:206
#, c-format
msgid "Chunk size %s\n"
msgstr ""

#: ../diskdrake.pm_.c:207
#, c-format
msgid "RAID-disks %s\n"
msgstr ""

#: ../diskdrake.pm_.c:224
msgid "Please click on a partition"
msgstr ""

#: ../diskdrake.pm_.c:229
#, c-format
msgid "Size: %d MB\n"
msgstr ""

#: ../diskdrake.pm_.c:230
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr ""

#: ../diskdrake.pm_.c:232
#, c-format
msgid "on bus %d id %d\n"
msgstr ""

#: ../diskdrake.pm_.c:245
msgid "Mount"
msgstr ""

#: ../diskdrake.pm_.c:246
msgid "Active"
msgstr ""

#: ../diskdrake.pm_.c:247
msgid "Add to RAID"
msgstr ""

#: ../diskdrake.pm_.c:248
msgid "Remove from RAID"
msgstr ""

#: ../diskdrake.pm_.c:249
msgid "Modify RAID"
msgstr ""

#: ../diskdrake.pm_.c:256
msgid "Choose action"
msgstr ""

#: ../diskdrake.pm_.c:349
msgid ""
"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
"1024).\n"
"Either you use LILO and it won't work, or you don't use LILO and you don't "
"need /boot"
msgstr ""

#: ../diskdrake.pm_.c:353
msgid ""
"The partition you've selected to add as root (/) is physically located "
"beyond\n"
"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
"If you plan to use the LILO boot manager, be careful to add a /boot partition"
msgstr ""

#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372
#, c-format
msgid "Use ``%s'' instead"
msgstr ""

#: ../diskdrake.pm_.c:375
msgid "Use ``Unmount'' first"
msgstr ""

#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409
msgid "changing type of"
msgstr ""

#: ../diskdrake.pm_.c:388
msgid "Continue anyway?"
msgstr ""

#: ../diskdrake.pm_.c:393
msgid "Quit without saving"
msgstr ""

#: ../diskdrake.pm_.c:393
msgid "Quit without writing the partition table?"
msgstr ""

#: ../diskdrake.pm_.c:412
msgid "Change partition type"
msgstr ""

#: ../diskdrake.pm_.c:413
msgid "Which partition type do you want?"
msgstr ""

#: ../diskdrake.pm_.c:429
#, c-format
msgid "Where do you want to mount device %s?"
msgstr ""

#: ../diskdrake.pm_.c:451
msgid "formatting"
msgstr ""

#: ../diskdrake.pm_.c:453
msgid "Formatting"
msgstr ""

#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:214
#, c-format
msgid "Formatting partition %s"
msgstr ""

#: ../diskdrake.pm_.c:458
msgid "After formatting all partitions,"
msgstr ""

#: ../diskdrake.pm_.c:458
msgid "all data on these partitions will be lost"
msgstr ""

#: ../diskdrake.pm_.c:468
msgid "Move"
msgstr ""

#: ../diskdrake.pm_.c:469
msgid "Which disk do you want to move to?"
msgstr ""

#: ../diskdrake.pm_.c:473
msgid "Sector"
msgstr ""

#: ../diskdrake.pm_.c:474
msgid "Which sector do you want to move to?"
msgstr ""

#: ../diskdrake.pm_.c:477
msgid "Moving"
msgstr ""

#: ../diskdrake.pm_.c:477
msgid "Moving partition..."
msgstr ""

#: ../diskdrake.pm_.c:487
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr ""

#: ../diskdrake.pm_.c:489
msgid "You'll need to reboot before the modification can take place"
msgstr ""

#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255
msgid "Computing fat filesystem bounds"
msgstr ""

#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555
#: ../install_steps_gtk.pm_.c:255
msgid "Resizing"
msgstr ""

#: ../diskdrake.pm_.c:524
msgid "resizing"
msgstr ""

#: ../diskdrake.pm_.c:534
msgid "Choose the new size"
msgstr ""

#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287
#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:329
#: ../install_steps_gtk.pm_.c:378
msgid "MB"
msgstr ""

#: ../diskdrake.pm_.c:587
msgid "Create a new partition"
msgstr ""

#: ../diskdrake.pm_.c:603
msgid "Start sector: "
msgstr ""

#: ../diskdrake.pm_.c:606
msgid "Size in MB: "
msgstr ""

#: ../diskdrake.pm_.c:609
msgid "Filesystem type: "
msgstr ""

#: ../diskdrake.pm_.c:611
msgid "Preference: "
msgstr ""

#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671
msgid "Select file"
msgstr ""

#: ../diskdrake.pm_.c:664
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""

#: ../diskdrake.pm_.c:672
msgid "Warning"
msgstr ""

#: ../diskdrake.pm_.c:673
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""

#: ../diskdrake.pm_.c:687
msgid "Trying to rescue partition table"
msgstr ""

#: ../diskdrake.pm_.c:698
msgid "device"
msgstr ""

#: ../diskdrake.pm_.c:699
msgid "level"
msgstr ""

#: ../diskdrake.pm_.c:700
msgid "chunk size"
msgstr ""

#: ../diskdrake.pm_.c:712
msgid "Choose an existing RAID to add to"
msgstr ""

#: ../diskdrake.pm_.c:713
msgid "new"
msgstr ""

#: ../fs.pm_.c:67 ../fs.pm_.c:73
#, c-format
msgid "%s formatting of %s failed"
msgstr ""

#: ../fs.pm_.c:93
#, c-format
msgid "don't know how to format %s in type %s"
msgstr ""

#: ../fs.pm_.c:106
msgid "nfs mount failed"
msgstr ""

#: ../fs.pm_.c:123
msgid "mount failed: "
msgstr ""

#: ../fs.pm_.c:134
#, c-format
msgid "error unmounting %s: %s"
msgstr ""

#: ../fsedit.pm_.c:218
msgid "Mount points must begin with a leading /"
msgstr ""

#: ../fsedit.pm_.c:221
#, c-format
msgid "There is already a partition with mount point %s"
msgstr ""

#: ../fsedit.pm_.c:305
#, c-format
msgid "Error opening %s for writing: %s"
msgstr ""

#: ../fsedit.pm_.c:387
msgid ""
"An error has occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""

#: ../fsedit.pm_.c:402
msgid "You don't have any partitions!"
msgstr ""

#: ../help.pm_.c:7
msgid "Choose preferred language for install and system usage."
msgstr ""

#: ../help.pm_.c:10
msgid "Choose the layout corresponding to your keyboard from the list above"
msgstr ""

#: ../help.pm_.c:13
msgid ""
"Choose \"Install\" if there are no previous versions of Linux\n"
"installed, or if you wish to use multiple distributions or versions.\n"
"\n"
"\n"
"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
"(Helios) or Gold 2000."
msgstr ""

#: ../help.pm_.c:22
msgid ""
"Select:\n"
"\n"
"  - Recommended: If you have never installed Linux before.\n"
"\n"
"\n"
"  - Customized: If you are familiar with Linux, you will be able to \n"
"select the usage for the installed system between normal, development or\n"
"server. Choose \"Normal\" for a general purpose installation of your\n"
"computer. You may choose \"Development\" if you will be using the computer\n"
"primarily for software development, or choose \"Server\" if you wish to\n"
"install a general purpose server (for mail, printing...).\n"
"\n"
"\n"
"  - Expert: If you are fluent with GNU/Linux and want to perform\n"
"a highly customized installation, this Install Class is for you. You will\n"
"be able to select the usage of your installed system as for \"Customized\"."
msgstr ""

#: ../help.pm_.c:40
msgid ""
"DrakX will attempt at first to look for one or more PCI\n"
"SCSI adapter(s). If it finds it (or them)  and knows which driver(s)\n"
"to use, it will insert it (them)  automatically.\n"
"\n"
"\n"
"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
"doesn't know which driver to use for this card, or if you have no\n"
"SCSI adapters at all, you will then be prompted on whether you have\n"
"one or not. If you have none, answer \"No\". If you have one or more,\n"
"answer \"Yes\". A list of drivers will then pop up, from which you\n"
"will have to select one.\n"
"\n"
"\n"
"After you have selected the driver, DrakX will ask if you\n"
"want to specify options for it. First, try and let the driver\n"
"probe for the hardware: it usually works fine.\n"
"\n"
"\n"
"If not, do not forget the information on your hardware that you\n"
"could get from your documentation or from Windows (if you have it\n"
"on your system), as suggested by the installation guide. These\n"
"are the options you will need to provide to the driver."
msgstr ""

#: ../help.pm_.c:64
msgid ""
"At this point, you may choose what partition(s) to use to install\n"
"your Linux-Mandrake system if they have been already defined (from a\n"
"previous install of Linux or from another partitionning tool). In other\n"
"cases, hard drive partitions must be defined. This operation consists of\n"
"logically dividing the computer's hard drive capacity into separate\n"
"areas for use.\n"
"\n"
"\n"
"If you have to create new partitions, use \"Auto allocate\" to "
"automatically\n"
"create partitions for Linux. You can select the disk for partitionning by\n"
"clicking on \"hda\" for the first IDE drive,\n"
"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
"\n"
"\n"
"Two common partition are: the root partition (/), which is the starting\n"
"point of the filesystem's directory hierarchy, and /boot, which contains\n"
"all files necessary to start the operating system when the\n"
"computer is first turned on.\n"
"\n"
"\n"
"Because the effects of this process are usually irreversible, partitioning\n"
"can be intimidating and stressful to the unexperienced user. DiskDrake\n"
"simplifies the process so that it need not be. Consult the documentation\n"
"and take your time before proceeding."
msgstr ""

#: ../help.pm_.c:90
msgid ""
"Any partitions that have been newly defined must be formatted for\n"
"use (formatting meaning creating a filesystem). At this time, you may\n"
"wish to re-format some already existing partitions to erase the data\n"
"they contain. Note: it is not necessary to re-format pre-existing\n"
"partitions, particularly if they contain files or data you wish to keep.\n"
"Typically retained are /home and /usr/local."
msgstr ""

#: ../help.pm_.c:98
msgid ""
"You may now select the packages you wish to install.\n"
"\n"
"\n"
"First you can select group of package to install or upgrade. After that\n"
"you can select more packages according to the total size you wish to\n"
"select.\n"
"\n"
"\n"
"If you are in expert mode, you can select packages individually.\n"
"Please note that some packages require the installation of others.\n"
"These are referred to as package dependencies. The packages you select,\n"
"and the packages they require will be automatically selected for\n"
"install. It is impossible to install a package without installing all\n"
"of its dependencies.\n"
"\n"
"\n"
"Informations on specific package are available in the\n"
"area titled \"Info\", located on the right of the list of\n"
"packages."
msgstr ""

#: ../help.pm_.c:119
msgid ""
"The packages selected are now being installed. This operation\n"
"should take a few minutes unless you have chosen to upgrade an\n"
"existing system, in that case it can take more time even before\n"
"upgrade starts."
msgstr ""

#: ../help.pm_.c:125
msgid ""
"If DrakX failed to find your mouse, or if you want to\n"
"check what it has done, you will be presented the list of mice\n"
"above.\n"
"\n"
"\n"
"If you agree with DrakX' settings, just jump to the section\n"
"you want by clicking on it in the menu on the left. Otherwise,\n"
"choose a mouse type in the menu which you think is the closest\n"
"match for your mouse.\n"
"\n"
"\n"
"In case of a serial mouse, you will also have to tell DrakX\n"
"which serial port it is connected to."
msgstr ""

#: ../help.pm_.c:140
msgid ""
"Please select the correct port. For example, the COM1 port in MS Windows\n"
"is named ttyS0 in Linux."
msgstr ""

#: ../help.pm_.c:144
msgid ""
"This section is dedicated to configuring a local area\n"
"network (LAN) or a modem.\n"
"\n"
"Choose \"Local LAN\" and DrakX will\n"
"try to find an Ethernet adapter on your machine. PCI adapters\n"
"should be found and initialized automatically.\n"
"However, if your peripheral is ISA, autodetection will not work,\n"
"and you will have to choose a driver from the list that will appear then.\n"
"\n"
"\n"
"As for SCSI adapters, you can let the driver probe for the adapter\n"
"in the first time, otherwise you will have to specify the options\n"
"to the driver that you will have fetched from documentation of your\n"
"hardware.\n"
"\n"
"\n"
"If you install a Linux-Mandrake system on a machine which is part\n"
"of an already existing network, the network administrator will\n"
"have given you all necessary information (IP address, network\n"
"submask or netmask for short, and hostname). If you're setting\n"
"up a private network at home for example, you should choose\n"
"addresses.\n"
"\n"
"\n"
"Choose \"Dialup with modem\" and the Internet connection with\n"
"a modem will be configured. DrakX will try to find your modem,\n"
"if it fails you will have to select the right serial port where\n"
"your modem is connected to."
msgstr ""

#: ../help.pm_.c:174
msgid ""
"Enter:\n"
"\n"
"  - IP address: if you don't know it, ask your network administrator or "
"ISP.\n"
"\n"
"\n"
"  - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n"
"sure, ask your network administrator or ISP.\n"
"\n"
"\n"
"  - Automatic IP: If your network uses bootp or dhcp protocol, select \n"
"this option. If selected, no value is needed in \"IP address\". If you are\n"
"not sure, ask your network administrator or ISP.\n"
msgstr ""

#: ../help.pm_.c:189
msgid ""
"You may now enter dialup options. If you're not sure what to enter, the\n"
"correct information can be obtained from your ISP."
msgstr ""

#: ../help.pm_.c:193
msgid ""
"If you will use proxies, please configure them now. If you don't know if\n"
"you will use proxies, ask your network administrator or your ISP."
msgstr ""

#: ../help.pm_.c:197
msgid ""
"You can install cryptographic package if your internet connection has been\n"
"set up correctly. First choose a mirror where you wish to download packages "
"and\n"
"after that select the packages to install.\n"
"\n"
"Note you have to select mirror and cryptographic packages according\n"
"to your legislation."
msgstr ""

#: ../help.pm_.c:205
msgid ""
"You can now select your timezone according to where you live.\n"
"\n"
"\n"
"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n"
"in local time according to the time zone you have selected."
msgstr ""

#: ../help.pm_.c:212
msgid "Help"
msgstr ""

#: ../help.pm_.c:215
msgid ""
"Linux can deal with many types of printer. Each of these\n"
"types require a different setup.\n"
"\n"
"\n"
"If your printer is directly connected to your computer, select\n"
"\"Local printer\". You will then have to tell which port your\n"
"printer is connected to, and select the appropriate filter.\n"
"\n"
"\n"
"If you want to access a printer located on a remote Unix machine,\n"
"you will have to select \"Remote lpd\". In order to make\n"
"it work, no username or password is required, but you will need\n"
"to know the name of the printing queue on this server.\n"
"\n"
"\n"
"If you want to access a SMB printer (which means, a printer located\n"
"on a remote Windows 9x/NT machine), you will have to specify its\n"
"SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
"plus the username, workgroup and password required in order to\n"
"access the printer, and of course the name of the printer. The same goes\n"
"for a NetWare printer, except that you need no workgroup information."
msgstr ""

#: ../help.pm_.c:238
msgid ""
"You can now enter the root password for your Linux-Mandrake\n"
"system. The password must be entered twice to verify that both\n"
"password entries are identical.\n"
"\n"
"\n"
"Root is the administrator of the system, and is the only user\n"
"allowed to modify the system configuration. Therefore, choose\n"
"this password carefully! Unauthorized use of the root account can\n"
"be extremely dangerous to the integrity of the system and its data,\n"
"and other systems connected to it. The password should be a\n"
"mixture of alphanumeric characters and a least 8 characters long. It\n"
"should *never* be written down. Do not make the password too long or\n"
"complicated, though: you must be able to remember without too much\n"
"effort."
msgstr ""

#: ../help.pm_.c:254
msgid ""
"To enable a more secure system, you should select \"Use shadow file\" and\n"
"\"Use MD5 passwords\"."
msgstr ""

#: ../help.pm_.c:258
msgid ""
"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n"
"network administrator."
msgstr ""

#: ../help.pm_.c:262
msgid ""
"You may now create one or more \"regular\" user account(s), as\n"
"opposed to the \"privileged\" user account, root. You can create\n"
"one or more account(s) for each person you want to allow to use\n"
"the computer. Note that each user account will have its own\n"
"preferences (graphical environment, program settings, etc.)\n"
"and its own \"home directory\", in which these preferences are\n"
"stored.\n"
"\n"
"\n"
"First of all, create an account for yourself! Even if you will be the only "
"user\n"
"of the machine, you may NOT connect as root for daily use of the system: "
"it's a\n"
"very high security risk. Making the system unusable is very often a typo "
"away.\n"
"\n"
"\n"
"Therefore, you should connect to the system using the user account\n"
"you will have created here, and login as root only for administration\n"
"and maintenance purposes."
msgstr ""

#: ../help.pm_.c:281
msgid ""
"It is strongly recommended that you answer \"Yes\" here. If you install\n"
"Microsoft Windows at a later date it will overwrite the boot sector.\n"
"Unless you have made a bootdisk as suggested, you will not be able to\n"
"boot into Linux any more."
msgstr ""

#: ../help.pm_.c:287
msgid ""
"You need to indicate where you wish\n"
"to place the information required to boot to Linux.\n"
"\n"
"\n"
"Unless you know exactly what you are doing, choose \"First sector of\n"
"drive (MBR)\"."
msgstr ""

#: ../help.pm_.c:295
msgid ""
"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
"(the master drive on the primary channel)."
msgstr ""

#: ../help.pm_.c:299
msgid ""
"LILO (the LInux LOader) can boot Linux and other operating systems.\n"
"Normally they are correctly detected during installation. If you don't\n"
"see yours detected, you can add one or more now.\n"
"\n"
"\n"
"If you don't want that everybody could access at one of them, you can "
"remove\n"
"it now (a boot disk will be needed to boot it)."
msgstr ""

#: ../help.pm_.c:308
msgid ""
"LILO main options are:\n"
"  - Boot device: Sets the name of the device (e.g. a hard disk\n"
"partition) that contains the boot sector. Unless you know specifically\n"
"otherwise, choose \"/dev/hda\".\n"
"\n"
"\n"
"  - Linear: Generate linear sector addresses instead of\n"
"sector/head/cylinder addresses. Linear addresses are translated at run\n"
"time and do not depend on disk geometry. Note that boot disks may not be\n"
"portable if \"linear\" is used, because the BIOS service to determine the\n"
"disk geometry does not work reliably for floppy  disks. When using\n"
"\"linear\" with large disks, /sbin/lilo may generate references to\n"
"inaccessible disk areas, because 3D sector addresses are not known\n"
"before boot time.\n"
"\n"
"\n"
"  - Compact: Tries to merge read requests for adjacent sectors into a\n"
"single read request. This drastically reduces load time and keeps the\n"
"map smaller. Using \"compact\" is especially recommended when booting from\n"
"a floppy disk.\n"
"\n"
"\n"
"  - Delay before booting default image: Specifies the number in tenths\n"
"of a second the boot loader should wait before booting the first image.\n"
"This is useful on systems that immediately boot from the hard disk after\n"
"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
"omitted or is set to zero.\n"
"\n"
"\n"
"  - Video mode: This specifies the VGA text mode that should be selected\n"
"when booting. The following values are available: \n"
"    * normal: select normal 80x25 text mode.\n"
"    * <number>:  use the corresponding text mode."
msgstr ""

#: ../help.pm_.c:343
msgid ""
"Now it's time to configure the X Window System, which is the\n"
"core of the Linux GUI (Graphical User Interface). For this purpose,\n"
"you must configure your video card and monitor. Most of these\n"
"steps are automated, though, therefore your work may only consist\n"
"of verifying what has been done and accept the settings :)\n"
"\n"
"\n"
"When the configuration is over, X will be started (unless you\n"
"ask DrakX not to) so that you can check and see if the\n"
"settings suit you. If they don't, you can come back and\n"
"change them, as many times as necessary."
msgstr ""

#: ../help.pm_.c:356
msgid ""
"If something is wrong in X configuration, use these options to correctly\n"
"configure the X Window System."
msgstr ""

#: ../help.pm_.c:360
msgid ""
"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n"
"\"No\"."
msgstr ""

#: ../help.pm_.c:364
msgid ""
"You can now select some miscellaneous options for you system.\n"
"\n"
"  - Use hard drive optimizations: This option can improve hard disk\n"
"accesses but is only for advanced users, it can ruin your hard drive if\n"
"used incorrectly. Use it only if you know how.\n"
"\n"
"\n"
"  - Choose security level: You can choose a security level for your\n"
"system.\n"
"    Please refer to the manual for more information.\n"
"\n"
"\n"
"  - Precise RAM size if needed: In some cases, Linux is unable to\n"
"correctly detect all the installed RAM on  some systems. If this is the\n"
"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n"
"normal.\n"
"\n"
"\n"
"  - Removable media automounting: If you would prefer not to manually\n"
"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n"
"\"umount\", select this option. \n"
"\n"
"\n"
"  - Enable Num Lock at startup: If you want Number Lock enabled after\n"
"booting, select this option (Note: Num Lock will still not work under\n"
"X)."
msgstr ""

#: ../help.pm_.c:392
msgid ""
"Your system is going to reboot.\n"
"\n"
"After rebooting, your new Linux Mandrake system will load automatically.\n"
"If you want to boot into another existing operating system, please read\n"
"the additional instructions."
msgstr ""

#: ../install2.pm_.c:43
msgid "Choose your language"
msgstr ""

#: ../install2.pm_.c:44
msgid "Select installation class"
msgstr ""

#: ../install2.pm_.c:45
msgid "Setup SCSI"
msgstr ""

#: ../install2.pm_.c:46
msgid "Choose install or upgrade"
msgstr ""

#: ../install2.pm_.c:47
msgid "Configure mouse"
msgstr ""

#: ../install2.pm_.c:48
msgid "Choose your keyboard"
msgstr ""

#: ../install2.pm_.c:49
msgid "Miscellaneous"
msgstr ""

#: ../install2.pm_.c:50
msgid "Setup filesystems"
msgstr ""

#: ../install2.pm_.c:51
msgid "Format partitions"
msgstr ""

#: ../install2.pm_.c:52
msgid "Choose packages to install"
msgstr ""

#: ../install2.pm_.c:53
msgid "Install system"
msgstr ""

#: ../install2.pm_.c:54
msgid "Configure networking"
msgstr ""

#: ../install2.pm_.c:55
msgid "Cryptographic"
msgstr ""

#: ../install2.pm_.c:56
msgid "Configure timezone"
msgstr ""

#: ../install2.pm_.c:58
msgid "Configure printer"
msgstr ""

#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:521
#: ../install_steps_interactive.pm_.c:522
msgid "Set root password"
msgstr ""

#: ../install2.pm_.c:60
msgid "Add a user"
msgstr ""

#: ../install2.pm_.c:61
msgid "Create a bootdisk"
msgstr ""

#: ../install2.pm_.c:62
msgid "Install bootloader"
msgstr ""

#: ../install2.pm_.c:63
msgid "Configure X"
msgstr ""

#: ../install2.pm_.c:64
msgid "Exit install"
msgstr ""

#: ../install2.pm_.c:83
msgid "beginner"
msgstr ""

#: ../install2.pm_.c:83
msgid "developer"
msgstr ""

#: ../install2.pm_.c:83
msgid "expert"
msgstr ""

#: ../install2.pm_.c:83
msgid "server"
msgstr ""

#: ../install2.pm_.c:309
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""

#: ../install2.pm_.c:325
msgid "Not enough swap to fulfill installation, please add some"
msgstr ""

#: ../install_any.pm_.c:186 ../standalone/diskdrake_.c:61
msgid ""
"I can't read your partition table, it's too corrupted for me :(\n"
"I'll try to go on blanking bad partitions"
msgstr ""

#: ../install_any.pm_.c:202
msgid ""
"DiskDrake failed to read correctly the partition table.\n"
"Continue at your own risk!"
msgstr ""

#: ../install_any.pm_.c:212
msgid "Searching root partition."
msgstr ""

#: ../install_any.pm_.c:241
msgid "Information"
msgstr ""

#: ../install_any.pm_.c:242
#, c-format
msgid "%s: This is not a root partition, please select another one."
msgstr ""

#: ../install_any.pm_.c:244
msgid "No root partition found"
msgstr ""

#: ../install_any.pm_.c:281
msgid "Can't use broadcast with no NIS domain"
msgstr ""

#: ../install_any.pm_.c:456
msgid "Error reading file $f"
msgstr ""

#: ../install_any.pm_.c:462
#, c-format
msgid "Bad kickstart file %s (failed %s)"
msgstr ""

#: ../install_steps.pm_.c:68
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""

#: ../install_steps.pm_.c:132
#, c-format
msgid "Duplicate mount point %s"
msgstr ""

#: ../install_steps.pm_.c:504
msgid "No floppy drive available"
msgstr ""

#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26
#, c-format
msgid "Entering step `%s'\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:293
msgid "You must have a swap partition"
msgstr ""

#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:295
msgid ""
"You don't have a swap partition\n"
"\n"
"Continue anyway?"
msgstr ""

#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:329
msgid "Choose the size you want to install"
msgstr ""

#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:378
msgid "Total size: "
msgstr ""

#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:390
#, c-format
msgid "Version: %s\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:391
#, c-format
msgid "Size: %d KB\n"
msgstr ""

#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:506
msgid "Choose the packages you want to install"
msgstr ""

#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:509
msgid "Info"
msgstr ""

#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:517
#: ../install_steps_interactive.pm_.c:81
msgid "Install"
msgstr ""

#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:536
#: ../install_steps_interactive.pm_.c:257
msgid "Installing"
msgstr ""

#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:543
msgid "Please wait, "
msgstr ""

#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:545
msgid "Time remaining "
msgstr ""

#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:546
msgid "Total time "
msgstr ""

#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:551
#: ../install_steps_interactive.pm_.c:257
msgid "Preparing installation"
msgstr ""

#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:566
#, c-format
msgid "Installing package %s"
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:591
msgid "Go on anyway?"
msgstr ""

#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:591
msgid "There was an error ordering packages:"
msgstr ""

#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:832
msgid "Use existing configuration for X11?"
msgstr ""

#: ../install_steps_gtk.pm_.c:259
msgid ""
"WARNING!\n"
"\n"
"DrakX now needs to resize your Windows partition. Be careful: this operation "
"is\n"
"dangerous. If you have not already done so, you should first run scandisk "
"(and\n"
"optionally run defrag) on this partition and backup your data.\n"
"When sure, press Ok."
msgstr ""

#: ../install_steps_gtk.pm_.c:277
msgid "Automatic resizing failed"
msgstr ""

#: ../install_steps_gtk.pm_.c:326
#, c-format
msgid "Going to install %d MB. You can choose to install more programs"
msgstr ""

#: ../install_steps_gtk.pm_.c:327
msgid "You will be able to choose more precisely in next step"
msgstr ""

#: ../install_steps_gtk.pm_.c:389
msgid "Bad package"
msgstr ""

#: ../install_steps_gtk.pm_.c:539
msgid "Estimating"
msgstr ""

#: ../install_steps_gtk.pm_.c:561
#, c-format
msgid "%d packages"
msgstr ""

#: ../install_steps_gtk.pm_.c:561
msgid ", %U MB"
msgstr ""

#: ../install_steps_interactive.pm_.c:37
msgid "An error occurred"
msgstr ""

#: ../install_steps_interactive.pm_.c:54
msgid "Which language do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22
msgid "Keyboard"
msgstr ""

#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23
msgid "What is your keyboard layout?"
msgstr ""

#: ../install_steps_interactive.pm_.c:79
msgid "Install/Upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:80
msgid "Is this an install or an upgrade?"
msgstr ""

#: ../install_steps_interactive.pm_.c:81
msgid "Upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:89
msgid "Root Partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:90
msgid "What is the root partition (/) of your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:100
msgid "Recommended"
msgstr ""

#: ../install_steps_interactive.pm_.c:101
msgid "Customized"
msgstr ""

#: ../install_steps_interactive.pm_.c:102
msgid "Expert"
msgstr ""

#: ../install_steps_interactive.pm_.c:104
#: ../install_steps_interactive.pm_.c:118
msgid "Install Class"
msgstr ""

#: ../install_steps_interactive.pm_.c:105
msgid "What installation class do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:114
msgid "Normal"
msgstr ""

#: ../install_steps_interactive.pm_.c:115
msgid "Development"
msgstr ""

#: ../install_steps_interactive.pm_.c:116
msgid "Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:119
msgid "What usage do you want?"
msgstr ""

#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25
msgid "What is the type of your mouse?"
msgstr ""

#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38
msgid "Mouse Port"
msgstr ""

#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39
msgid "Which serial port is your mouse connected to?"
msgstr ""

#: ../install_steps_interactive.pm_.c:157
msgid "no available partitions"
msgstr ""

#: ../install_steps_interactive.pm_.c:159
#, c-format
msgid "(%dMb)"
msgstr ""

#: ../install_steps_interactive.pm_.c:166
msgid "Which partition do you want to use as your root partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:173
msgid "Choose the mount points"
msgstr ""

#: ../install_steps_interactive.pm_.c:185
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""

#: ../install_steps_interactive.pm_.c:204
msgid "Choose the partitions you want to format"
msgstr ""

#: ../install_steps_interactive.pm_.c:223
msgid "Looking for available packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:229
msgid "Finding packages to upgrade"
msgstr ""

#: ../install_steps_interactive.pm_.c:238
msgid "Package Group Selection"
msgstr ""

#: ../install_steps_interactive.pm_.c:266
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""

#: ../install_steps_interactive.pm_.c:275
msgid "Post install configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:286
msgid "Keep the current IP configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:287
msgid "Reconfigure network now"
msgstr ""

#: ../install_steps_interactive.pm_.c:288
#: ../install_steps_interactive.pm_.c:300
msgid "Do not set up networking"
msgstr ""

#: ../install_steps_interactive.pm_.c:290
#: ../install_steps_interactive.pm_.c:298
msgid "Network Configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:291
msgid "Local networking has already been configured. Do you want to:"
msgstr ""

#: ../install_steps_interactive.pm_.c:299
msgid "Do you want to configure networking for your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:300
msgid "Dialup with modem"
msgstr ""

#: ../install_steps_interactive.pm_.c:300
msgid "Local LAN"
msgstr ""

#: ../install_steps_interactive.pm_.c:309
msgid "no network card found"
msgstr ""

#: ../install_steps_interactive.pm_.c:339
#: ../install_steps_interactive.pm_.c:340
#, c-format
msgid "Configuring network device %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:341
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""

#: ../install_steps_interactive.pm_.c:344
msgid "Automatic IP"
msgstr ""

#: ../install_steps_interactive.pm_.c:344
msgid "IP address:"
msgstr ""

#: ../install_steps_interactive.pm_.c:344
msgid "Netmask:"
msgstr ""

#: ../install_steps_interactive.pm_.c:345
msgid "(bootp/dhcp)"
msgstr ""

#: ../install_steps_interactive.pm_.c:351 ../printerdrake.pm_.c:149
msgid "IP address should be in format 1.2.3.4"
msgstr ""

#: ../install_steps_interactive.pm_.c:369
msgid "Configuring network"
msgstr ""

#: ../install_steps_interactive.pm_.c:370
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one"
msgstr ""

#: ../install_steps_interactive.pm_.c:374
msgid "DNS server:"
msgstr ""

#: ../install_steps_interactive.pm_.c:374
msgid "Gateway device:"
msgstr ""

#: ../install_steps_interactive.pm_.c:374
msgid "Gateway:"
msgstr ""

#: ../install_steps_interactive.pm_.c:374
msgid "Host name:"
msgstr ""

#: ../install_steps_interactive.pm_.c:387
msgid "Try to find a modem?"
msgstr ""

#: ../install_steps_interactive.pm_.c:397
msgid "Which serial port is your modem connected to?"
msgstr ""

#: ../install_steps_interactive.pm_.c:402
msgid "Dialup options"
msgstr ""

#: ../install_steps_interactive.pm_.c:403
msgid "Connection name"
msgstr ""

#: ../install_steps_interactive.pm_.c:404
msgid "Phone number"
msgstr ""

#: ../install_steps_interactive.pm_.c:405
msgid "Login ID"
msgstr ""

#: ../install_steps_interactive.pm_.c:406
#: ../install_steps_interactive.pm_.c:523
#: ../install_steps_interactive.pm_.c:569
#: ../install_steps_interactive.pm_.c:663 ../standalone/adduserdrake_.c:40
msgid "Password"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "Authentication"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "CHAP"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "PAP"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "Script-based"
msgstr ""

#: ../install_steps_interactive.pm_.c:407
msgid "Terminal-based"
msgstr ""

#: ../install_steps_interactive.pm_.c:408
msgid "Domain name"
msgstr ""

#: ../install_steps_interactive.pm_.c:409
msgid "First DNS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:410
msgid "Second DNS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:423
msgid "Bringing up the network"
msgstr ""

#: ../install_steps_interactive.pm_.c:432
msgid ""
"You have now the possibility to download software aimed for encryption.\n"
"\n"
"WARNING:\n"
"\n"
"Due to different general requirements applicable to these software and "
"imposed\n"
"by various jurisdictions, customer and/or end user of theses software "
"should\n"
"ensure that the laws of his/their jurisdiction allow him/them to download, "
"stock\n"
"and/or use these software.\n"
"\n"
"In addition customer and/or end user shall particularly be aware to not "
"infringe\n"
"the laws of his/their jurisdiction. Should customer and/or end user do not\n"
"respect the provision of these applicable laws, he/they will incur serious\n"
"sanctions.\n"
"\n"
"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
"liable\n"
"for special, indirect or incidental damages whatsoever (including, but not\n"
"limited to loss of profits, business interruption, loss of commercial data "
"and\n"
"other pecuniary losses, and eventual liabilities and indemnification to be "
"paid\n"
"pursuant to a court decision) arising out of use, possession, or the sole\n"
"downloading of these software, to which customer and/or end user could\n"
"eventually have access after having sign up the present agreement.\n"
"\n"
"The present agreement shall be governed and construed pursuant to the laws "
"of\n"
"France except to the extent that the application of local laws is required "
"by\n"
"mandatory laws of public order. However this agreement expressly excludes "
"any\n"
"conflict of laws, principles, choice of law or rule to the contrary. "
"Therefore\n"
"French laws shall prevail on any other local laws.\n"
"\n"
"For any queries relating to these agreement, please contact \n"
"Mandrakesoft\n"
"43, rue d'Aboukir\n"
"75002 Paris\n"
"FRANCE"
msgstr ""

#: ../install_steps_interactive.pm_.c:468
msgid "Choose a mirror from which to get the packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:473
msgid "Contacting the mirror to get the list of available packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:477
msgid "Which packages do you want to install"
msgstr ""

#: ../install_steps_interactive.pm_.c:479
msgid "Downloading cryptographic packages"
msgstr ""

#: ../install_steps_interactive.pm_.c:489
msgid "Which is your timezone?"
msgstr ""

#: ../install_steps_interactive.pm_.c:490
msgid "Is your hardware clock set to GMT?"
msgstr ""

#: ../install_steps_interactive.pm_.c:500
msgid "Printer"
msgstr ""

#: ../install_steps_interactive.pm_.c:501
msgid "Would you like to configure a printer?"
msgstr ""

#: ../install_steps_interactive.pm_.c:521
msgid "No password"
msgstr ""

#: ../install_steps_interactive.pm_.c:521
#: ../install_steps_interactive.pm_.c:737 ../interactive.pm_.c:74
#: ../interactive.pm_.c:84 ../interactive.pm_.c:163
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:94
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425
#: ../my_gtk.pm_.c:525
msgid "Ok"
msgstr ""

#: ../install_steps_interactive.pm_.c:524
#: ../install_steps_interactive.pm_.c:570
#: ../install_steps_interactive.pm_.c:664 ../standalone/adduserdrake_.c:41
msgid "Password (again)"
msgstr ""

#: ../install_steps_interactive.pm_.c:526
msgid "Use shadow file"
msgstr ""

#: ../install_steps_interactive.pm_.c:526
msgid "shadow"
msgstr ""

#: ../install_steps_interactive.pm_.c:527
msgid "MD5"
msgstr ""

#: ../install_steps_interactive.pm_.c:527
msgid "Use MD5 passwords"
msgstr ""

#: ../install_steps_interactive.pm_.c:529
msgid "Use NIS"
msgstr ""

#: ../install_steps_interactive.pm_.c:529
msgid "yellow pages"
msgstr ""

#: ../install_steps_interactive.pm_.c:533
#: ../install_steps_interactive.pm_.c:581
#: ../install_steps_interactive.pm_.c:675 ../standalone/adduserdrake_.c:52
msgid "Please try again"
msgstr ""

#: ../install_steps_interactive.pm_.c:533
#: ../install_steps_interactive.pm_.c:581
#: ../install_steps_interactive.pm_.c:675 ../standalone/adduserdrake_.c:52
msgid "The passwords do not match"
msgstr ""

#: ../install_steps_interactive.pm_.c:535
#, c-format
msgid "This password is too simple (must be at least %d characters long)"
msgstr ""

#: ../install_steps_interactive.pm_.c:542
msgid "Authentification NIS"
msgstr ""

#: ../install_steps_interactive.pm_.c:543
msgid "NIS Domain"
msgstr ""

#: ../install_steps_interactive.pm_.c:543
msgid "NIS Server"
msgstr ""

#: ../install_steps_interactive.pm_.c:563 ../standalone/adduserdrake_.c:34
msgid "Accept user"
msgstr ""

#: ../install_steps_interactive.pm_.c:563 ../standalone/adduserdrake_.c:34
msgid "Add user"
msgstr ""

#: ../install_steps_interactive.pm_.c:564 ../standalone/adduserdrake_.c:35
#, c-format
msgid "(already added %s)"
msgstr ""

#: ../install_steps_interactive.pm_.c:564 ../standalone/adduserdrake_.c:35
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""

#: ../install_steps_interactive.pm_.c:566 ../standalone/adduserdrake_.c:37
msgid "Real name"
msgstr ""

#: ../install_steps_interactive.pm_.c:567 ../standalone/adduserdrake_.c:38
msgid "User name"
msgstr ""

#: ../install_steps_interactive.pm_.c:572 ../standalone/adduserdrake_.c:43
msgid "Shell"
msgstr ""

#: ../install_steps_interactive.pm_.c:582 ../standalone/adduserdrake_.c:53
msgid "This password is too simple"
msgstr ""

#: ../install_steps_interactive.pm_.c:583 ../standalone/adduserdrake_.c:54
msgid "Please give a user name"
msgstr ""

#: ../install_steps_interactive.pm_.c:584 ../standalone/adduserdrake_.c:55
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""

#: ../install_steps_interactive.pm_.c:585 ../standalone/adduserdrake_.c:56
msgid "This user name is already added"
msgstr ""

#: ../install_steps_interactive.pm_.c:606
msgid ""
"A custom bootdisk provides a way of booting into your Linux system without\n"
"depending on the normal bootloader. This is useful if you don't want to "
"install\n"
"LILO on your system, or another operating system removes LILO, or LILO "
"doesn't\n"
"work with your hardware configuration. A custom bootdisk can also be used "
"with\n"
"the Mandrake rescue image, making it much easier to recover from severe "
"system\n"
"failures. Would you like to create a bootdisk for your system?"
msgstr ""

#: ../install_steps_interactive.pm_.c:615
msgid "Sorry, no floppy drive available"
msgstr ""

#: ../install_steps_interactive.pm_.c:618
msgid "Choose the floppy drive you want to use to make the bootdisk"
msgstr ""

#: ../install_steps_interactive.pm_.c:619
msgid "Skip"
msgstr ""

#: ../install_steps_interactive.pm_.c:623
#, c-format
msgid "Insert a floppy in drive %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:624
msgid "Creating bootdisk"
msgstr ""

#: ../install_steps_interactive.pm_.c:631
msgid "Preparing bootloader"
msgstr ""

#: ../install_steps_interactive.pm_.c:643
msgid "First sector of boot partition"
msgstr ""

#: ../install_steps_interactive.pm_.c:643
msgid "First sector of drive (MBR)"
msgstr ""

#: ../install_steps_interactive.pm_.c:648
msgid "LILO Installation"
msgstr ""

#: ../install_steps_interactive.pm_.c:649
msgid "Where do you want to install the bootloader?"
msgstr ""

#: ../install_steps_interactive.pm_.c:654
msgid "Do you want to use LILO?"
msgstr ""

#: ../install_steps_interactive.pm_.c:657
msgid "Boot device"
msgstr ""

#: ../install_steps_interactive.pm_.c:658
msgid "Linear (needed for some SCSI drives)"
msgstr ""

#: ../install_steps_interactive.pm_.c:658
msgid "linear"
msgstr ""

#: ../install_steps_interactive.pm_.c:659
msgid "Compact"
msgstr ""

#: ../install_steps_interactive.pm_.c:659
msgid "compact"
msgstr ""

#: ../install_steps_interactive.pm_.c:660
msgid "Delay before booting default image"
msgstr ""

#: ../install_steps_interactive.pm_.c:661
msgid "Video mode"
msgstr ""

#: ../install_steps_interactive.pm_.c:665
msgid "Restrict command line options"
msgstr ""

#: ../install_steps_interactive.pm_.c:665
msgid "restrict"
msgstr ""

#: ../install_steps_interactive.pm_.c:671
msgid "LILO main options"
msgstr ""

#: ../install_steps_interactive.pm_.c:674
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""

#: ../install_steps_interactive.pm_.c:685
msgid ""
"Here are the following entries in LILO.\n"
"You can add some more or change the existing ones."
msgstr ""

#: ../install_steps_interactive.pm_.c:687
msgid "Add"
msgstr ""

#: ../install_steps_interactive.pm_.c:696
msgid "Linux"
msgstr ""

#: ../install_steps_interactive.pm_.c:696
msgid "Other OS (windows...)"
msgstr ""

#: ../install_steps_interactive.pm_.c:696
msgid "Which type of entry do you want to add"
msgstr ""

#: ../install_steps_interactive.pm_.c:716
msgid "Image"
msgstr ""

#: ../install_steps_interactive.pm_.c:717
#: ../install_steps_interactive.pm_.c:725
msgid "Root"
msgstr ""

#: ../install_steps_interactive.pm_.c:718
msgid "Append"
msgstr ""

#: ../install_steps_interactive.pm_.c:719
msgid "Initrd"
msgstr ""

#: ../install_steps_interactive.pm_.c:720
msgid "Read-write"
msgstr ""

#: ../install_steps_interactive.pm_.c:726
msgid "Table"
msgstr ""

#: ../install_steps_interactive.pm_.c:727
msgid "Unsafe"
msgstr ""

#: ../install_steps_interactive.pm_.c:732
msgid "Label"
msgstr ""

#: ../install_steps_interactive.pm_.c:734
msgid "Default"
msgstr ""

#: ../install_steps_interactive.pm_.c:737
msgid "Remove entry"
msgstr ""

#: ../install_steps_interactive.pm_.c:740
msgid "Empty label not allowed"
msgstr ""

#: ../install_steps_interactive.pm_.c:741
msgid "This label is already in use"
msgstr ""

#: ../install_steps_interactive.pm_.c:742
#, c-format
msgid "A entry %s already exists"
msgstr ""

#: ../install_steps_interactive.pm_.c:756
msgid "Installation of LILO failed. The following error occured:"
msgstr ""

#: ../install_steps_interactive.pm_.c:770
msgid "Proxies configuration"
msgstr ""

#: ../install_steps_interactive.pm_.c:771
msgid "HTTP proxy"
msgstr ""

#: ../install_steps_interactive.pm_.c:772
msgid "FTP proxy"
msgstr ""

#: ../install_steps_interactive.pm_.c:778
msgid "Proxy should be http://..."
msgstr ""

#: ../install_steps_interactive.pm_.c:779
msgid "Proxy should be ftp://..."
msgstr ""

#: ../install_steps_interactive.pm_.c:789 ../standalone/draksec_.c:20
msgid "Welcome To Crackers"
msgstr ""

#: ../install_steps_interactive.pm_.c:790 ../standalone/draksec_.c:21
msgid "Poor"
msgstr ""

#: ../install_steps_interactive.pm_.c:791 ../standalone/draksec_.c:22
msgid "Low"
msgstr ""

#: ../install_steps_interactive.pm_.c:792 ../standalone/draksec_.c:23
msgid "Medium"
msgstr ""

#: ../install_steps_interactive.pm_.c:793 ../standalone/draksec_.c:24
msgid "High"
msgstr ""

#: ../install_steps_interactive.pm_.c:794 ../standalone/draksec_.c:25
msgid "Paranoid"
msgstr ""

#: ../install_steps_interactive.pm_.c:807
msgid "Miscellaneous questions"
msgstr ""

#: ../install_steps_interactive.pm_.c:808
msgid "(may cause data corruption)"
msgstr ""

#: ../install_steps_interactive.pm_.c:808
msgid "Use hard drive optimisations?"
msgstr ""

#: ../install_steps_interactive.pm_.c:809 ../standalone/draksec_.c:46
msgid "Choose security level"
msgstr ""

#: ../install_steps_interactive.pm_.c:810
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr ""

#: ../install_steps_interactive.pm_.c:811
msgid "Removable media automounting"
msgstr ""

#: ../install_steps_interactive.pm_.c:813
msgid "Enable num lock at startup"
msgstr ""

#: ../install_steps_interactive.pm_.c:816
msgid "Give the ram size in Mb"
msgstr ""

#: ../install_steps_interactive.pm_.c:844
#: ../install_steps_interactive.pm_.c:1009
msgid "Try to find PCI devices?"
msgstr ""

#: ../install_steps_interactive.pm_.c:859
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""

#: ../install_steps_interactive.pm_.c:866
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"For information on fixes which are available for this release of "
"Linux-Mandrake,\n"
"consult the Errata available from http://www.linux-mandrake.com/.\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Linux-Mandrake User's Guide."
msgstr ""

#: ../install_steps_interactive.pm_.c:875
msgid "Shutting down"
msgstr ""

#: ../install_steps_interactive.pm_.c:889
#, c-format
msgid "Installing driver for %s card %s"
msgstr ""

#: ../install_steps_interactive.pm_.c:890
#, c-format
msgid "(module %s)"
msgstr ""

#: ../install_steps_interactive.pm_.c:900
#, c-format
msgid "Which %s driver should I try?"
msgstr ""

#: ../install_steps_interactive.pm_.c:908
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""

#: ../install_steps_interactive.pm_.c:913
msgid "Autoprobe"
msgstr ""

#: ../install_steps_interactive.pm_.c:913
msgid "Specify options"
msgstr ""

#: ../install_steps_interactive.pm_.c:917
#, c-format
msgid "You may now provide its options to module %s."
msgstr ""

#: ../install_steps_interactive.pm_.c:923
#, c-format
msgid ""
"You may now provide its options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""

#: ../install_steps_interactive.pm_.c:926
msgid "Module options:"
msgstr ""

#: ../install_steps_interactive.pm_.c:936
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""

#: ../install_steps_interactive.pm_.c:949
msgid "Try to find PCMCIA cards?"
msgstr ""

#: ../install_steps_interactive.pm_.c:950
msgid "Configuring PCMCIA cards..."
msgstr ""

#: ../install_steps_interactive.pm_.c:950
msgid "PCMCIA"
msgstr ""

#: ../install_steps_interactive.pm_.c:957
msgid ""
"Linux does not yet fully support ultra dma 66 HPT.\n"
"As a work-around i can make a custom floppy giving access the hard drive on "
"ide2 and ide3"
msgstr ""

#: ../install_steps_interactive.pm_.c:978
msgid ""
"Enter a floppy to create an HTP enabled boot\n"
"(all data on floppy will be lost)"
msgstr ""

#: ../install_steps_interactive.pm_.c:994
msgid "It is necessary to restart installation booting on the floppy"
msgstr ""

#: ../install_steps_interactive.pm_.c:995
msgid "It is necessary to restart installation with the new parameters"
msgstr ""

#: ../install_steps_interactive.pm_.c:999
#, c-format
msgid ""
"Failed to create an HTP boot floppy.\n"
"You may have to restart installation and give ``%s'' at the prompt"
msgstr ""

#: ../install_steps_interactive.pm_.c:1013
#, c-format
msgid "Found %s %s interfaces"
msgstr ""

#: ../install_steps_interactive.pm_.c:1014
msgid "Do you have another one?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1015
#, c-format
msgid "Do you have any %s interface?"
msgstr ""

#: ../install_steps_interactive.pm_.c:1017 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176
msgid "No"
msgstr ""

#: ../install_steps_interactive.pm_.c:1017 ../interactive.pm_.c:79
#: ../my_gtk.pm_.c:424
msgid "Yes"
msgstr ""

#: ../install_steps_interactive.pm_.c:1018
msgid "See hardware info"
msgstr ""

#: ../install_steps_newt.pm_.c:19
#, c-format
msgid "Linux-Mandrake Installation %s"
msgstr ""

#: ../install_steps_newt.pm_.c:30
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""

#: ../interactive.pm_.c:84 ../interactive.pm_.c:162
#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:94
#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425
msgid "Cancel"
msgstr ""

#: ../interactive.pm_.c:180
msgid "Please wait"
msgstr ""

#: ../interactive_stdio.pm_.c:35
#, c-format
msgid "Ambiguity (%s), be more precise\n"
msgstr ""

#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51
#: ../interactive_stdio.pm_.c:70
msgid "Bad choice, try again\n"
msgstr ""

#: ../interactive_stdio.pm_.c:39
#, c-format
msgid " ? (default %s) "
msgstr ""

#: ../interactive_stdio.pm_.c:52
#, c-format
msgid "Your choice? (default %s) "
msgstr ""

#: ../interactive_stdio.pm_.c:71
#, c-format
msgid "Your choice? (default %s  enter `none' for none) "
msgstr ""

#: ../keyboard.pm_.c:78
msgid "Armenian"
msgstr ""

#: ../keyboard.pm_.c:79
msgid "Belgian"
msgstr ""

#: ../keyboard.pm_.c:80
msgid "Bulgarian"
msgstr ""

#: ../keyboard.pm_.c:81
msgid "Brazilian"
msgstr ""

#: ../keyboard.pm_.c:82
msgid "Swiss (French layout)"
msgstr ""

#: ../keyboard.pm_.c:83
msgid "Swiss (German layout)"
msgstr ""

#: ../keyboard.pm_.c:84
msgid "Czech"
msgstr ""

#: ../keyboard.pm_.c:85
msgid "German"
msgstr ""

#: ../keyboard.pm_.c:86
msgid "Danish"
msgstr ""

#: ../keyboard.pm_.c:87
msgid "Dvorak"
msgstr ""

#: ../keyboard.pm_.c:88
msgid "Estonian"
msgstr ""

#: ../keyboard.pm_.c:89
msgid "Spanish"
msgstr ""

#: ../keyboard.pm_.c:90
msgid "Finnish"
msgstr ""

#: ../keyboard.pm_.c:91
msgid "French"
msgstr ""

#: ../keyboard.pm_.c:92
msgid "Georgian (\"Russian\" layout)"
msgstr ""

#: ../keyboard.pm_.c:93
msgid "Georgian (\"Latin\" layout)"
msgstr ""

#: ../keyboard.pm_.c:94
msgid "Greek"
msgstr ""

#: ../keyboard.pm_.c:95
msgid "Hungarian"
msgstr ""

#: ../keyboard.pm_.c:96
msgid "Israeli"
msgstr ""

#: ../keyboard.pm_.c:97
msgid "Israeli (Phonetic)"
msgstr ""

#: ../keyboard.pm_.c:98
msgid "Icelandic"
msgstr ""

#: ../keyboard.pm_.c:99
msgid "Italian"
msgstr ""

#: ../keyboard.pm_.c:100
msgid "Latin American"
msgstr ""

#: ../keyboard.pm_.c:101
msgid "Dutch"
msgstr ""

#: ../keyboard.pm_.c:102
msgid "Lithuanian AZERTY"
msgstr ""

#: ../keyboard.pm_.c:103
msgid "Lithuanian \"number row\" QWERTY"
msgstr ""

#: ../keyboard.pm_.c:104
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr ""

#: ../keyboard.pm_.c:105
msgid "Norwegian"
msgstr ""

#: ../keyboard.pm_.c:106
msgid "Polish"
msgstr ""

#: ../keyboard.pm_.c:107
msgid "Portuguese"
msgstr ""

#: ../keyboard.pm_.c:108
msgid "Canadian (Quebec)"
msgstr ""

#: ../keyboard.pm_.c:109
msgid "Russian"
msgstr ""

#: ../keyboard.pm_.c:110
msgid "Russian (Yawerty)"
msgstr ""

#: ../keyboard.pm_.c:111
msgid "Swedish"
msgstr ""

#: ../keyboard.pm_.c:112
msgid "Slovenian"
msgstr ""

#: ../keyboard.pm_.c:113
msgid "Slovakian"
msgstr ""

#: ../keyboard.pm_.c:114
msgid "Thai keyboard"
msgstr ""

#: ../keyboard.pm_.c:115
msgid "Turkish (traditional \"F\" model)"
msgstr ""

#: ../keyboard.pm_.c:116
msgid "Turkish (modern \"Q\" model)"
msgstr ""

#: ../keyboard.pm_.c:117
msgid "Ukrainian"
msgstr ""

#: ../keyboard.pm_.c:118
msgid "UK keyboard"
msgstr ""

#: ../keyboard.pm_.c:119
msgid "US keyboard"
msgstr ""

#: ../keyboard.pm_.c:120
msgid "US keyboard (international)"
msgstr ""

#: ../keyboard.pm_.c:121
msgid "Yugoslavian (latin layout)"
msgstr ""

#: ../lilo.pm_.c:141
#, c-format
msgid ""
"Welcome to LILO the operating system chooser!\n"
"\n"
"To list the possible choices, press <TAB>.\n"
"\n"
"To load one of them, write its name and press <ENTER> or wait %d seconds for "
"default boot.\n"
"\n"
msgstr ""

#: ../mouse.pm_.c:20
msgid "No Mouse"
msgstr ""

#: ../mouse.pm_.c:21
msgid "Microsoft Rev 2.1A or higher (serial)"
msgstr ""

#: ../mouse.pm_.c:22
msgid "Logitech CC Series (serial)"
msgstr ""

#: ../mouse.pm_.c:23
msgid "Logitech MouseMan+/FirstMouse+ (serial)"
msgstr ""

#: ../mouse.pm_.c:24
msgid "ASCII MieMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:25
msgid "Genius NetMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:26
msgid "Microsoft IntelliMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:27
msgid "MM Series (serial)"
msgstr ""

#: ../mouse.pm_.c:28
msgid "MM HitTablet (serial)"
msgstr ""

#: ../mouse.pm_.c:29
msgid "Logitech Mouse (serial, old C7 type)"
msgstr ""

#: ../mouse.pm_.c:30
msgid "Logitech MouseMan/FirstMouse (serial)"
msgstr ""

#: ../mouse.pm_.c:31
msgid "Generic Mouse (serial)"
msgstr ""

#: ../mouse.pm_.c:32
msgid "Microsoft compatible (serial)"
msgstr ""

#: ../mouse.pm_.c:33
msgid "Generic 3 Button Mouse (serial)"
msgstr ""

#: ../mouse.pm_.c:34
msgid "Mouse Systems (serial)"
msgstr ""

#: ../mouse.pm_.c:35
msgid "Generic Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:36
msgid "Logitech MouseMan/FirstMouse (ps/2)"
msgstr ""

#: ../mouse.pm_.c:37
msgid "Generic 3 Button Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:38
msgid "ALPS GlidePoint (PS/2)"
msgstr ""

#: ../mouse.pm_.c:39
msgid "Logitech MouseMan+/FirstMouse+ (PS/2)"
msgstr ""

#: ../mouse.pm_.c:40
msgid "Kensington Thinking Mouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:41
msgid "ASCII MieMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:42
msgid "Genius NetMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:43
msgid "Genius NetMouse Pro (PS/2)"
msgstr ""

#: ../mouse.pm_.c:44
msgid "Genius NetScroll (PS/2)"
msgstr ""

#: ../mouse.pm_.c:45
msgid "Microsoft IntelliMouse (PS/2)"
msgstr ""

#: ../mouse.pm_.c:46
msgid "ATI Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:47
msgid "Microsoft Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:48
msgid "Logitech Bus Mouse"
msgstr ""

#: ../mouse.pm_.c:49
msgid "USB Mouse"
msgstr ""

#: ../mouse.pm_.c:50
msgid "USB Mouse (3 buttons or more)"
msgstr ""

#: ../partition_table.pm_.c:486
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions"
msgstr ""

#: ../partition_table.pm_.c:572
#, c-format
msgid "Error reading file %s"
msgstr ""

#: ../partition_table.pm_.c:579
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr ""

#: ../partition_table.pm_.c:581
msgid "Bad backup file"
msgstr ""

#: ../partition_table.pm_.c:602
#, c-format
msgid "Error writing to file %s"
msgstr ""

#: ../placeholder.pm_.c:5
msgid "Show less"
msgstr ""

#: ../placeholder.pm_.c:6
msgid "Show more"
msgstr ""

#: ../printer.pm_.c:244
msgid "Local printer"
msgstr ""

#: ../printer.pm_.c:245
msgid "Remote lpd"
msgstr ""

#: ../printer.pm_.c:246
msgid "SMB/Windows 95/98/NT"
msgstr ""

#: ../printer.pm_.c:247
msgid "NetWare"
msgstr ""

#: ../printerdrake.pm_.c:75
msgid "Local Printer Options"
msgstr ""

#: ../printerdrake.pm_.c:76
msgid ""
"Every print queue (which print jobs are directed to) needs a\n"
"name (often lp) and a spool directory associated with it. What\n"
"name and directory should be used for this queue?"
msgstr ""

#: ../printerdrake.pm_.c:79
msgid "Name of queue:"
msgstr ""

#: ../printerdrake.pm_.c:79
msgid "Spool directory:"
msgstr ""

#: ../printerdrake.pm_.c:90
msgid "Select Printer Connection"
msgstr ""

#: ../printerdrake.pm_.c:91
msgid "How is the printer connected?"
msgstr ""

#: ../printerdrake.pm_.c:99
msgid "Detecting devices..."
msgstr ""

#: ../printerdrake.pm_.c:99
msgid "Test ports"
msgstr ""

#: ../printerdrake.pm_.c:112
#, c-format
msgid "A printer, model \"%s\", has been detected on "
msgstr ""

#: ../printerdrake.pm_.c:119
msgid "Local Printer Device"
msgstr ""

#: ../printerdrake.pm_.c:120
msgid ""
"What device is your printer connected to  \n"
"(note that /dev/lp0 is equivalent to LPT1:)?\n"
msgstr ""

#: ../printerdrake.pm_.c:121
msgid "Printer Device:"
msgstr ""

#: ../printerdrake.pm_.c:125
msgid "Remote lpd Printer Options"
msgstr ""

#: ../printerdrake.pm_.c:126
msgid ""
"To use a remote lpd print queue, you need to supply\n"
"the hostname of the printer server and the queue name\n"
"on that server which jobs should be placed in."
msgstr ""

#: ../printerdrake.pm_.c:129
msgid "Remote hostname:"
msgstr ""

#: ../printerdrake.pm_.c:129
msgid "Remote queue"
msgstr ""

#: ../printerdrake.pm_.c:134
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr ""

#: ../printerdrake.pm_.c:135
msgid ""
"To print to a SMB printer, you need to provide the\n"
"SMB host name (Note! It may be different from its\n"
"TCP/IP hostname!) and possibly the IP address of the print server, as\n"
"well as the share name for the printer you wish to access and any\n"
"applicable user name, password, and workgroup information."
msgstr ""

#: ../printerdrake.pm_.c:140
msgid "SMB server IP:"
msgstr ""

#: ../printerdrake.pm_.c:140
msgid "SMB server host:"
msgstr ""

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "Password:"
msgstr ""

#: ../printerdrake.pm_.c:141
msgid "Share name:"
msgstr ""

#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163
msgid "User name:"
msgstr ""

#: ../printerdrake.pm_.c:142
msgid "Workgroup:"
msgstr ""

#: ../printerdrake.pm_.c:157
msgid "NetWare Printer Options"
msgstr ""

#: ../printerdrake.pm_.c:158
msgid ""
"To print to a NetWare printer, you need to provide the\n"
"NetWare print server name (Note! it may be different from its\n"
"TCP/IP hostname!) as well as the print queue name for the printer you\n"
"wish to access and any applicable user name and password."
msgstr ""

#: ../printerdrake.pm_.c:162
msgid "Print Queue Name:"
msgstr ""

#: ../printerdrake.pm_.c:162
msgid "Printer Server:"
msgstr ""

#: ../printerdrake.pm_.c:173
msgid "Yes, print ASCII test page"
msgstr ""

#: ../printerdrake.pm_.c:174
msgid "Yes, print PostScript test page"
msgstr ""

#: ../printerdrake.pm_.c:175
msgid "Yes, print both test pages"
msgstr ""

#: ../printerdrake.pm_.c:183
msgid "Configure Printer"
msgstr ""

#: ../printerdrake.pm_.c:184
msgid "What type of printer do you have?"
msgstr ""

#: ../printerdrake.pm_.c:206
msgid "Printer options"
msgstr ""

#: ../printerdrake.pm_.c:207
msgid "Paper Size"
msgstr ""

#: ../printerdrake.pm_.c:208
msgid "Eject page after job?"
msgstr ""

#: ../printerdrake.pm_.c:211
msgid "Fix stair-stepping text?"
msgstr ""

#: ../printerdrake.pm_.c:214
msgid "Uniprint driver options"
msgstr ""

#: ../printerdrake.pm_.c:215
msgid "Color depth options"
msgstr ""

#: ../printerdrake.pm_.c:225
msgid "Do you want to test printing?"
msgstr ""

#: ../printerdrake.pm_.c:236
msgid "Printing test page(s)..."
msgstr ""

#: ../printerdrake.pm_.c:254
#, c-format
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Printing status:\n"
"%s\n"
"\n"
"Does it work properly?"
msgstr ""

#: ../printerdrake.pm_.c:258
msgid ""
"Test page(s) have been sent to the printer daemon.\n"
"This may take a little time before printer start.\n"
"Does it work properly?"
msgstr ""

#: ../raid.pm_.c:36
#, c-format
msgid "Can't add a partition to _formatted_ RAID md%d"
msgstr ""

#: ../raid.pm_.c:106
msgid "Can't write file $file"
msgstr ""

#: ../raid.pm_.c:146
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr ""

#: ../standalone/draksec_.c:28
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive: it must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""

#: ../standalone/draksec_.c:31
msgid ""
"Password are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""

#: ../standalone/draksec_.c:32
msgid ""
"Few improvements for this security level, the main one is that there are\n"
"more security warnings and checks."
msgstr ""

#: ../standalone/draksec_.c:34
msgid ""
"This is the standard security recommended for a computer that will be used\n"
"to connect to the Internet as a client. There are now security checks. "
msgstr ""

#: ../standalone/draksec_.c:36
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which accept\n"
"connections from many clients. "
msgstr ""

#: ../standalone/draksec_.c:39
msgid ""
"We take level 4 features, but now the system is entirely closed.\n"
"Security features are at their maximum."
msgstr ""

#: ../standalone/draksec_.c:49
msgid "Setting security level"
msgstr ""

#: ../standalone/drakxconf_.c:21
msgid "Choose the tool you want to use"
msgstr ""

#: ../standalone/drakxservices_.c:21
msgid "Choose which services should be automatically started at boot time"
msgstr ""

#: ../standalone/mousedrake_.c:30
msgid "no serial_usb found\n"
msgstr ""

#: ../standalone/mousedrake_.c:35
msgid "Emulate third button?"
msgstr ""