# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 1999-12-21 02:28+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: ENCODING\n" #: ../Xconfigurator.pm_.c:158 msgid "Graphic card" msgstr "" #: ../Xconfigurator.pm_.c:158 msgid "Select a graphic card" msgstr "" #: ../Xconfigurator.pm_.c:159 msgid "Choose a X server" msgstr "" #: ../Xconfigurator.pm_.c:159 msgid "X server" msgstr "" #: ../Xconfigurator.pm_.c:180 msgid "Select the memory size of your graphic card" msgstr "" #: ../Xconfigurator.pm_.c:202 msgid "Choose options for server" msgstr "" #: ../Xconfigurator.pm_.c:220 msgid "Choose a monitor" msgstr "" #: ../Xconfigurator.pm_.c:220 msgid "Monitor" msgstr "" #: ../Xconfigurator.pm_.c:223 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" #: ../Xconfigurator.pm_.c:230 msgid "Horizontal refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:230 msgid "Vertical refresh rate" msgstr "" #: ../Xconfigurator.pm_.c:271 msgid "Monitor not configured" msgstr "" #: ../Xconfigurator.pm_.c:274 msgid "Graphic card not configured yet" msgstr "" #: ../Xconfigurator.pm_.c:277 msgid "Resolutions not chosen yet" msgstr "" #: ../Xconfigurator.pm_.c:285 msgid "Do you want to test the configuration?" msgstr "" #: ../Xconfigurator.pm_.c:285 msgid "Test configuration" msgstr "" #: ../Xconfigurator.pm_.c:318 msgid "An error occurred:" msgstr "" #: ../Xconfigurator.pm_.c:320 msgid "" "\n" "try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:341 #, c-format msgid "(leaving in %d seconds)" msgstr "" #: ../Xconfigurator.pm_.c:345 ../my_gtk.pm_.c:423 msgid "Is this correct?" msgstr "" #: ../Xconfigurator.pm_.c:353 msgid "An error occurred, try changing some parameters" msgstr "" #: ../Xconfigurator.pm_.c:361 ../Xconfigurator.pm_.c:526 msgid "Automatic resolutions" msgstr "" #: ../Xconfigurator.pm_.c:362 msgid "" "To find the available resolutions I will try different ones.\n" "Your screen will blink...\n" "You can switch if off if you want, you'll hear a beep when it's over" msgstr "" #: ../Xconfigurator.pm_.c:413 ../printerdrake.pm_.c:210 msgid "Resolution" msgstr "" #: ../Xconfigurator.pm_.c:448 msgid "Choose resolution and color depth" msgstr "" #: ../Xconfigurator.pm_.c:456 msgid "Show all" msgstr "" #: ../Xconfigurator.pm_.c:480 msgid "Resolutions" msgstr "" #: ../Xconfigurator.pm_.c:527 msgid "" "I can try to find the available resolutions (eg: 800x600).\n" "Sometimes, though, it may hang the machine.\n" "Do you want to try?" msgstr "" #: ../Xconfigurator.pm_.c:532 msgid "" "No valid modes found\n" "Try with another video card or monitor" msgstr "" #: ../Xconfigurator.pm_.c:724 #, c-format msgid "Keyboard layout: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:725 #, c-format msgid "Mouse type: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:726 #, c-format msgid "Mouse device: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:727 #, c-format msgid "Monitor: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:728 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:729 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:730 #, c-format msgid "Graphic card: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:731 #, c-format msgid "Graphic memory: %s kB\n" msgstr "" #: ../Xconfigurator.pm_.c:732 #, c-format msgid "XFree86 server: %s\n" msgstr "" #: ../Xconfigurator.pm_.c:746 msgid "Preparing X-Window configuration" msgstr "" #: ../Xconfigurator.pm_.c:760 msgid "Change Monitor" msgstr "" #: ../Xconfigurator.pm_.c:761 msgid "Change Graphic card" msgstr "" #: ../Xconfigurator.pm_.c:762 msgid "Change Server options" msgstr "" #: ../Xconfigurator.pm_.c:763 msgid "Change Resolution" msgstr "" #: ../Xconfigurator.pm_.c:764 msgid "Automatical resolutions search" msgstr "" #: ../Xconfigurator.pm_.c:768 msgid "Show information" msgstr "" #: ../Xconfigurator.pm_.c:769 msgid "Test again" msgstr "" #: ../Xconfigurator.pm_.c:770 msgid "Quit" msgstr "" #: ../Xconfigurator.pm_.c:774 msgid "What do you want to do?" msgstr "" #: ../Xconfigurator.pm_.c:781 msgid "Forget the changes?" msgstr "" #: ../Xconfigurator.pm_.c:796 #, c-format msgid "Please relog into %s to activate the changes" msgstr "" #: ../Xconfigurator.pm_.c:812 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "" #: ../Xconfigurator.pm_.c:815 msgid "X at startup" msgstr "" #: ../Xconfigurator.pm_.c:816 msgid "" "I can set up your computer to automatically start X upon booting.\n" "Would you like X to start when you reboot?" msgstr "" #: ../Xconfigurator_consts.pm_.c:4 msgid "256 colors (8 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:5 msgid "32 thousand colors (15 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:6 msgid "65 thousand colors (16 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:7 msgid "16 million colors (24 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:8 msgid "4 billion colors (32 bits)" msgstr "" #: ../Xconfigurator_consts.pm_.c:95 msgid "256 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:96 msgid "512 kB" msgstr "" #: ../Xconfigurator_consts.pm_.c:97 msgid "1 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:98 msgid "2 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:99 msgid "4 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:100 msgid "8 MB" msgstr "" #: ../Xconfigurator_consts.pm_.c:101 msgid "16 MB or more" msgstr "" #: ../Xconfigurator_consts.pm_.c:105 ../Xconfigurator_consts.pm_.c:106 msgid "Standard VGA, 640x480 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:107 msgid "Super VGA, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:108 msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" msgstr "" #: ../Xconfigurator_consts.pm_.c:109 msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:110 msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:111 msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:112 msgid "High Frequency SVGA, 1024x768 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:113 msgid "Multi-frequency that can do 1280x1024 at 60 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:114 msgid "Multi-frequency that can do 1280x1024 at 74 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:115 msgid "Multi-frequency that can do 1280x1024 at 76 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:116 msgid "Monitor that can do 1600x1200 at 70 Hz" msgstr "" #: ../Xconfigurator_consts.pm_.c:117 msgid "Monitor that can do 1600x1200 at 76 Hz" msgstr "" #: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:367 msgid "Create" msgstr "" #: ../diskdrake.pm_.c:17 msgid "Unmount" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:369 msgid "Delete" msgstr "" #: ../diskdrake.pm_.c:18 msgid "Format" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:524 msgid "Resize" msgstr "" #: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:411 msgid "Type" msgstr "" #: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:427 msgid "Mount point" msgstr "" #: ../diskdrake.pm_.c:33 msgid "Write /etc/fstab" msgstr "" #: ../diskdrake.pm_.c:34 msgid "Toggle to expert mode" msgstr "" #: ../diskdrake.pm_.c:35 msgid "Toggle to normal mode" msgstr "" #: ../diskdrake.pm_.c:36 msgid "Restore from file" msgstr "" #: ../diskdrake.pm_.c:37 msgid "Save in file" msgstr "" #: ../diskdrake.pm_.c:38 msgid "Restore from floppy" msgstr "" #: ../diskdrake.pm_.c:39 msgid "Save on floppy" msgstr "" #: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:527 #: ../install_steps_interactive.pm_.c:649 ../standalone/adduserdrake_.c:26 msgid "Done" msgstr "" #: ../diskdrake.pm_.c:43 msgid "Clear all" msgstr "" #: ../diskdrake.pm_.c:44 msgid "Format all" msgstr "" #: ../diskdrake.pm_.c:45 msgid "Auto allocate" msgstr "" #: ../diskdrake.pm_.c:48 msgid "All primary partitions are used" msgstr "" #: ../diskdrake.pm_.c:48 msgid "I can't add any more partition" msgstr "" #: ../diskdrake.pm_.c:48 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" #: ../diskdrake.pm_.c:51 msgid "Rescue partition table" msgstr "" #: ../diskdrake.pm_.c:52 msgid "Undo" msgstr "" #: ../diskdrake.pm_.c:53 msgid "Write partition table" msgstr "" #: ../diskdrake.pm_.c:54 msgid "Reload" msgstr "" #: ../diskdrake.pm_.c:98 msgid "Empty" msgstr "" #: ../diskdrake.pm_.c:98 msgid "Ext2" msgstr "" #: ../diskdrake.pm_.c:98 msgid "FAT" msgstr "" #: ../diskdrake.pm_.c:98 msgid "Other" msgstr "" #: ../diskdrake.pm_.c:98 msgid "Swap" msgstr "" #: ../diskdrake.pm_.c:104 msgid "Filesystem types:" msgstr "" #: ../diskdrake.pm_.c:113 msgid "Details" msgstr "" #: ../diskdrake.pm_.c:127 msgid "" "You have one big fat partition.\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" #: ../diskdrake.pm_.c:131 msgid "Please make a backup of your data first" msgstr "" #: ../diskdrake.pm_.c:131 ../diskdrake.pm_.c:145 ../diskdrake.pm_.c:455 #: ../diskdrake.pm_.c:484 msgid "Read carefully!" msgstr "" #: ../diskdrake.pm_.c:145 #, c-format msgid "After %s partition %s," msgstr "" #: ../diskdrake.pm_.c:145 msgid "all data on this partition will be lost" msgstr "" #: ../diskdrake.pm_.c:164 ../install_any.pm_.c:184 ../install_steps.pm_.c:67 #: ../install_steps_interactive.pm_.c:36 ../standalone/diskdrake_.c:60 msgid "Error" msgstr "" #: ../diskdrake.pm_.c:188 ../diskdrake.pm_.c:607 msgid "Mount point: " msgstr "" #: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:227 msgid "Device: " msgstr "" #: ../diskdrake.pm_.c:190 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "" #: ../diskdrake.pm_.c:191 ../diskdrake.pm_.c:230 msgid "Type: " msgstr "" #: ../diskdrake.pm_.c:192 #, c-format msgid "Start: sector %s\n" msgstr "" #: ../diskdrake.pm_.c:193 #, c-format msgid "Size: %s MB" msgstr "" #: ../diskdrake.pm_.c:195 #, c-format msgid ", %s sectors" msgstr "" #: ../diskdrake.pm_.c:197 #, c-format msgid "Cylinder %d to cylinder %d\n" msgstr "" #: ../diskdrake.pm_.c:198 msgid "Formatted\n" msgstr "" #: ../diskdrake.pm_.c:199 msgid "Not formatted\n" msgstr "" #: ../diskdrake.pm_.c:200 msgid "Mounted\n" msgstr "" #: ../diskdrake.pm_.c:201 #, c-format msgid "RAID md%s\n" msgstr "" #: ../diskdrake.pm_.c:202 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" #: ../diskdrake.pm_.c:204 #, c-format msgid "Level %s\n" msgstr "" #: ../diskdrake.pm_.c:205 #, c-format msgid "Chunk size %s\n" msgstr "" #: ../diskdrake.pm_.c:206 #, c-format msgid "RAID-disks %s\n" msgstr "" #: ../diskdrake.pm_.c:223 msgid "Please click on a partition" msgstr "" #: ../diskdrake.pm_.c:228 #, c-format msgid "Size: %d MB\n" msgstr "" #: ../diskdrake.pm_.c:229 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "" #: ../diskdrake.pm_.c:231 #, c-format msgid "on bus %d id %d\n" msgstr "" #: ../diskdrake.pm_.c:244 msgid "Mount" msgstr "" #: ../diskdrake.pm_.c:245 msgid "Active" msgstr "" #: ../diskdrake.pm_.c:246 msgid "Add to RAID" msgstr "" #: ../diskdrake.pm_.c:247 msgid "Remove from RAID" msgstr "" #: ../diskdrake.pm_.c:248 msgid "Modify RAID" msgstr "" #: ../diskdrake.pm_.c:255 msgid "Choose action" msgstr "" #: ../diskdrake.pm_.c:346 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" #: ../diskdrake.pm_.c:350 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" #: ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:369 #, c-format msgid "Use ``%s'' instead" msgstr "" #: ../diskdrake.pm_.c:372 msgid "Use ``Unmount'' first" msgstr "" #: ../diskdrake.pm_.c:373 ../diskdrake.pm_.c:406 msgid "changing type of" msgstr "" #: ../diskdrake.pm_.c:385 msgid "Continue anyway?" msgstr "" #: ../diskdrake.pm_.c:390 msgid "Quit without saving" msgstr "" #: ../diskdrake.pm_.c:390 msgid "Quit without writing the partition table?" msgstr "" #: ../diskdrake.pm_.c:409 msgid "Change partition type" msgstr "" #: ../diskdrake.pm_.c:410 msgid "Which partition type do you want?" msgstr "" #: ../diskdrake.pm_.c:426 #, c-format msgid "Where do you want to mount device %s?" msgstr "" #: ../diskdrake.pm_.c:448 msgid "formatting" msgstr "" #: ../diskdrake.pm_.c:450 msgid "Formatting" msgstr "" #: ../diskdrake.pm_.c:450 ../install_steps_interactive.pm_.c:213 #, c-format msgid "Formatting partition %s" msgstr "" #: ../diskdrake.pm_.c:455 msgid "After formatting all partitions," msgstr "" #: ../diskdrake.pm_.c:455 msgid "all data on these partitions will be lost" msgstr "" #: ../diskdrake.pm_.c:465 msgid "Move" msgstr "" #: ../diskdrake.pm_.c:466 msgid "Which disk do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:470 msgid "Sector" msgstr "" #: ../diskdrake.pm_.c:471 msgid "Which sector do you want to move to?" msgstr "" #: ../diskdrake.pm_.c:474 msgid "Moving" msgstr "" #: ../diskdrake.pm_.c:474 msgid "Moving partition..." msgstr "" #: ../diskdrake.pm_.c:484 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "" #: ../diskdrake.pm_.c:486 msgid "You'll need to reboot before the modification can take place" msgstr "" #: ../diskdrake.pm_.c:507 ../install_steps_gtk.pm_.c:254 msgid "Computing fat filesystem bounds" msgstr "" #: ../diskdrake.pm_.c:507 ../diskdrake.pm_.c:552 #: ../install_steps_gtk.pm_.c:254 msgid "Resizing" msgstr "" #: ../diskdrake.pm_.c:521 msgid "resizing" msgstr "" #: ../diskdrake.pm_.c:531 msgid "Choose the new size" msgstr "" #: ../diskdrake.pm_.c:531 ../install_steps_gtk.pm_.c:328 #: ../install_steps_gtk.pm_.c:377 ../unused/install_steps_graphical.pm_.c:314 msgid "MB" msgstr "" #: ../diskdrake.pm_.c:584 msgid "Create a new partition" msgstr "" #: ../diskdrake.pm_.c:600 msgid "Start sector: " msgstr "" #: ../diskdrake.pm_.c:603 msgid "Size in MB: " msgstr "" #: ../diskdrake.pm_.c:606 msgid "Filesystem type: " msgstr "" #: ../diskdrake.pm_.c:608 msgid "Preference: " msgstr "" #: ../diskdrake.pm_.c:652 ../diskdrake.pm_.c:668 msgid "Select file" msgstr "" #: ../diskdrake.pm_.c:661 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" #: ../diskdrake.pm_.c:669 msgid "Warning" msgstr "" #: ../diskdrake.pm_.c:670 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" #: ../diskdrake.pm_.c:684 msgid "Trying to rescue partition table" msgstr "" #: ../diskdrake.pm_.c:695 msgid "device" msgstr "" #: ../diskdrake.pm_.c:696 msgid "level" msgstr "" #: ../diskdrake.pm_.c:697 msgid "chunk size" msgstr "" #: ../diskdrake.pm_.c:709 msgid "Choose an existing RAID to add to" msgstr "" #: ../diskdrake.pm_.c:710 msgid "new" msgstr "" #: ../fs.pm_.c:67 ../fs.pm_.c:73 #, c-format msgid "%s formatting of %s failed" msgstr "" #: ../fs.pm_.c:93 #, c-format msgid "don't know how to format %s in type %s" msgstr "" #: ../fs.pm_.c:106 msgid "nfs mount failed" msgstr "" #: ../fs.pm_.c:123 msgid "mount failed: " msgstr "" #: ../fs.pm_.c:134 #, c-format msgid "error unmounting %s: %s" msgstr "" #: ../fsedit.pm_.c:218 msgid "Mount points must begin with a leading /" msgstr "" #: ../fsedit.pm_.c:221 #, c-format msgid "There is already a partition with mount point %s" msgstr "" #: ../fsedit.pm_.c:305 #, c-format msgid "Error opening %s for writing: %s" msgstr "" #: ../fsedit.pm_.c:387 msgid "" "An error has occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" #: ../fsedit.pm_.c:402 msgid "You don't have any partitions!" msgstr "" #: ../help.pm_.c:7 msgid "Choose preferred language for install and system usage." msgstr "" #: ../help.pm_.c:10 msgid "Choose the layout corresponding to your keyboard from the list above" msgstr "" #: ../help.pm_.c:13 msgid "" "Choose \"Install\" if there are no previous versions of Linux\n" "installed, or if you wish to use multiple distributions or versions.\n" "\n" "\n" "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n" "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n" "(Helios) or Gold 2000." msgstr "" #: ../help.pm_.c:22 msgid "" "Select:\n" "\n" " - Recommended: If you have never installed Linux before.\n" "\n" "\n" " - Customized: If you are familiar with Linux, you will be able to \n" "select the usage for the installed system between normal, development or\n" "server. Choose \"Normal\" for a general purpose installation of your\n" "computer. You may choose \"Development\" if you will be using the computer\n" "primarily for software development, or choose \"Server\" if you wish to\n" "install a general purpose server (for mail, printing...).\n" "\n" "\n" " - Expert: If you are fluent with GNU/Linux and want to perform\n" "a highly customized installation, this Install Class is for you. You will\n" "be able to select the usage of your installed system as for \"Customized\"." msgstr "" #: ../help.pm_.c:40 msgid "" "DrakX will attempt at first to look for one or more PCI\n" "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" "to use, it will insert it (them) automatically.\n" "\n" "\n" "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" "doesn't know which driver to use for this card, or if you have no\n" "SCSI adapters at all, you will then be prompted on whether you have\n" "one or not. If you have none, answer \"No\". If you have one or more,\n" "answer \"Yes\". A list of drivers will then pop up, from which you\n" "will have to select one.\n" "\n" "\n" "After you have selected the driver, DrakX will ask if you\n" "want to specify options for it. First, try and let the driver\n" "probe for the hardware: it usually works fine.\n" "\n" "\n" "If not, do not forget the information on your hardware that you\n" "could get from your documentation or from Windows (if you have it\n" "on your system), as suggested by the installation guide. These\n" "are the options you will need to provide to the driver." msgstr "" #: ../help.pm_.c:64 msgid "" "At this point, you may choose what partition(s) to use to install\n" "your Linux-Mandrake system if they have been already defined (from a\n" "previous install of Linux or from another partitionning tool). In other\n" "cases, hard drive partitions must be defined. This operation consists of\n" "logically dividing the computer's hard drive capacity into separate\n" "areas for use.\n" "\n" "\n" "If you have to create new partitions, use \"Auto allocate\" to " "automatically\n" "create partitions for Linux. You can select the disk for partitionning by\n" "clicking on \"hda\" for the first IDE drive,\n" "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" "\n" "\n" "Two common partition are: the root partition (/), which is the starting\n" "point of the filesystem's directory hierarchy, and /boot, which contains\n" "all files necessary to start the operating system when the\n" "computer is first turned on.\n" "\n" "\n" "Because the effects of this process are usually irreversible, partitioning\n" "can be intimidating and stressful to the unexperienced user. DiskDrake\n" "simplifies the process so that it need not be. Consult the documentation\n" "and take your time before proceeding." msgstr "" #: ../help.pm_.c:90 msgid "" "Any partitions that have been newly defined must be formatted for\n" "use (formatting meaning creating a filesystem). At this time, you may\n" "wish to re-format some already existing partitions to erase the data\n" "they contain. Note: it is not necessary to re-format pre-existing\n" "partitions, particularly if they contain files or data you wish to keep.\n" "Typically retained are /home and /usr/local." msgstr "" #: ../help.pm_.c:98 msgid "" "You may now select the packages you wish to install.\n" "\n" "\n" "First you can select group of package to install or upgrade. After that\n" "you can select more packages according to the total size you wish to\n" "select.\n" "\n" "\n" "If you are in expert mode, you can select packages individually.\n" "Please note that some packages require the installation of others.\n" "These are referred to as package dependencies. The packages you select,\n" "and the packages they require will be automatically selected for\n" "install. It is impossible to install a package without installing all\n" "of its dependencies.\n" "\n" "\n" "Information on each category and specific package is available in the\n" "area titled \"Info\", located between list of packages and the\n" "button \"Install\" to start the installation." msgstr "" #: ../help.pm_.c:119 msgid "" "The packages selected are now being installed. This operation\n" "should take a few minutes unless you have chosen to upgrade an\n" "existing system, in that case it can take more time even before\n" "upgrade starts." msgstr "" #: ../help.pm_.c:125 msgid "" "If DrakX failed to find your mouse, or if you want to\n" "check what it has done, you will be presented the list of mice\n" "above.\n" "\n" "\n" "If you agree with DrakX' settings, just jump to the section\n" "you want by clicking on it in the menu on the left. Otherwise,\n" "choose a mouse type in the menu which you think is the closest\n" "match for your mouse.\n" "\n" "In case of a serial mouse, you will also have to tell DrakX\n" "which serial port it is connected to." msgstr "" #: ../help.pm_.c:139 msgid "" "Please select the correct port. For example, the COM1 port in MS Windows\n" "is named ttyS0 in Linux." msgstr "" #: ../help.pm_.c:143 msgid "" "This section is dedicated to configuring a local area\n" "network (LAN) or a modem.\n" "\n" "Choose \"Local LAN\" and DrakX will\n" "try to find an Ethernet adapter on your machine. PCI adapters\n" "should be found and initialized automatically.\n" "However, if your peripheral is ISA, autodetection will not work,\n" "and you will have to choose a driver from the list that will appear then.\n" "\n" "\n" "As for SCSI adapters, you can let the driver probe for the adapter\n" "in the first time, otherwise you will have to specify the options\n" "to the driver that you will have fetched from Windows' control\n" "panel.\n" "\n" "\n" "If you install a Linux-Mandrake system on a machine which is part\n" "of an already existing network, the network administrator will\n" "have given you all necessary information (IP address, network\n" "submask or netmask for short, and hostname). If you're setting\n" "up a private network at home for example, you should choose\n" "addresses.\n" "\n" "\n" "Choose \"Dialup with modem\" and the Internet connection with\n" "a modem will be configured. DrakX will try to find your modem,\n" "if it fails you will have to select the right serial port where\n" "your modem is connected to." msgstr "" #: ../help.pm_.c:173 msgid "" "Enter:\n" "\n" " - IP address: if you don't know it, ask your network administrator.\n" "\n" " - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n" "sure, ask your network administrator.\n" "\n" " - Automatic IP: If your network uses bootp or dhcpd protocol, select \n" "this option. If selected, no value is needed in \"IP address\". If you are\n" "not sure, ask your network administrator.\n" msgstr "" #: ../help.pm_.c:186 msgid "" "You may now enter dialup options. If you're not sure what to enter, the\n" "correct information can be obtained from your ISP." msgstr "" #: ../help.pm_.c:190 msgid "" "If you will use proxies, please configure them now. If you don't know if\n" "you will use proxies, ask your network administrator or your ISP." msgstr "" #: ../help.pm_.c:194 msgid "" "You can install cryptographic package if your internet connection has been\n" "set up correctly. First choose a mirror where you wish to download packages " "and\n" "after that select the packages to install.\n" "\n" "Note you have to select mirror and cryptographic packages according\n" "to your legislation." msgstr "" #: ../help.pm_.c:202 msgid "" "You can now select your timezone according to where you live.\n" "\n" "\n" "Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n" "in local time according to the time zone you have selected." msgstr "" #: ../help.pm_.c:209 msgid "Help" msgstr "" #: ../help.pm_.c:212 msgid "" "Linux can deal with many types of printer. Each of these\n" "types require a different setup.\n" "\n" "\n" "If your printer is directly connected to your computer, select\n" "\"Local printer\". You will then have to tell which port your\n" "printer is connected to, and select the appropriate filter.\n" "\n" "\n" "If you want to access a printer located on a remote Unix machine,\n" "you will have to select \"Remote lpd\". In order to make\n" "it work, no username or password is required, but you will need\n" "to know the name of the printing queue on this server.\n" "\n" "\n" "If you want to access a SMB printer (which means, a printer located\n" "on a remote Windows 9x/NT machine), you will have to specify its\n" "SMB name (which is not its TCP/IP name), and possibly its IP address,\n" "plus the username, workgroup and password required in order to\n" "access the printer, and of course the name of the printer. The same goes\n" "for a NetWare printer, except that you need no workgroup information." msgstr "" #: ../help.pm_.c:235 msgid "" "You can now enter the root password for your Linux-Mandrake\n" "system. The password must be entered twice to verify that both\n" "password entries are identical.\n" "\n" "\n" "Root is the administrator of the system, and is the only user\n" "allowed to modify the system configuration. Therefore, choose\n" "this password carefully! Unauthorized use of the root account can\n" "be extremely dangerous to the integrity of the system and its data,\n" "and other systems connected to it. The password should be a\n" "mixture of alphanumeric characters and a least 8 characters long. It\n" "should *never* be written down. Do not make the password too long or\n" "complicated, though: you must be able to remember without too much\n" "effort." msgstr "" #: ../help.pm_.c:251 msgid "" "To enable a more secure system, you should select \"Use shadow file\" and\n" "\"Use MD5 passwords\"." msgstr "" #: ../help.pm_.c:255 msgid "" "If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" "network administrator." msgstr "" #: ../help.pm_.c:259 msgid "" "You may now create one or more \"regular\" user account(s), as\n" "opposed to the \"privileged\" user account, root. You can create\n" "one or more account(s) for each person you want to allow to use\n" "the computer. Note that each user account will have its own\n" "preferences (graphical environment, program settings, etc.)\n" "and its own \"home directory\", in which these preferences are\n" "stored.\n" "\n" "\n" "First of all, create an account for yourself! Even if you will be the only " "user\n" "of the machine, you may NOT connect as root for daily use of the system: " "it's a\n" "very high security risk. Making the system unusable is very often a typo " "away.\n" "\n" "\n" "Therefore, you should connect to the system using the user account\n" "you will have created here, and login as root only for administration\n" "and maintenance purposes." msgstr "" #: ../help.pm_.c:278 msgid "" "It is strongly recommended that you answer \"Yes\" here. If you install\n" "Microsoft Windows at a later date it will overwrite the boot sector.\n" "Unless you have made a bootdisk as suggested, you will not be able to\n" "boot into Linux any more." msgstr "" #: ../help.pm_.c:284 msgid "" "You need to indicate where you wish\n" "to place the information required to boot to Linux.\n" "\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of\n" "drive (MBR)\"." msgstr "" #: ../help.pm_.c:292 msgid "" "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" "(the master drive on the primary channel)." msgstr "" #: ../help.pm_.c:296 msgid "" "LILO (the LInux LOader) can boot Linux and other operating systems.\n" "Normally they are correctly detected during installation. If you don't\n" "see yours detected, you can add one or more now.\n" "\n" "If you won't everybody can assess at one of them, you can remove it now\n" "(a boot disk will be needed to boot it)." msgstr "" #: ../help.pm_.c:304 msgid "" "LILO main options are:\n" " - Boot device: Sets the name of the device (e.g. a hard disk\n" "partition) that contains the boot sector. Unless you know specifically\n" "otherwise, choose \"/dev/hda\".\n" "\n" " - Linear: Generate linear sector addresses instead of\n" "sector/head/cylinder addresses. Linear addresses are translated at run\n" "time and do not depend on disk geometry. Note that boot disks may not be\n" "portable if \"linear\" is used, because the BIOS service to determine the\n" "disk geometry does not work reliably for floppy disks. When using\n" "\"linear\" with large disks, /sbin/lilo may generate references to\n" "inaccessible disk areas, because 3D sector addresses are not known\n" "before boot time.\n" "\n" " - Compact: Tries to merge read requests for adjacent sectors into a\n" "single read request. This drastically reduces load time and keeps the\n" "map smaller. Using \"compact\" is especially recommended when booting from\n" "a floppy disk.\n" "\n" " - Delay before booting default image: Specifies the number in tenths\n" "of a second the boot loader should wait before booting the first image.\n" "This is useful on systems that immediately boot from the hard disk after\n" "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" "omitted or is set to zero.\n" "\n" " - Video mode: This specifies the VGA text mode that should be selected\n" "when booting. The following values are available: \n" " * normal: select normal 80x25 text mode.\n" " * : use the corresponding text mode." msgstr "" #: ../help.pm_.c:335 msgid "" "Now it's time to configure the X Window System, which is the\n" "core of the Linux GUI (Graphical User Interface). For this purpose,\n" "you must configure your video card and monitor. Most of these\n" "steps are automated, though, therefore your work may only consist\n" "of verifying what has been done and accept the settings :)\n" "\n" "\n" "When the configuration is over, X will be started (unless you\n" "ask DrakX not to) so that you can check and see if the\n" "settings suit you. If they don't, you can come back and\n" "change them, as many times as necessary." msgstr "" #: ../help.pm_.c:348 msgid "" "If something is wrong in X configuration, use these options to correctly\n" "configure the X Window System." msgstr "" #: ../help.pm_.c:352 msgid "" "If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" "\"No\"." msgstr "" #: ../help.pm_.c:356 msgid "" "You can now select some miscellaneous options for you system.\n" "\n" " - Use hard drive optimizations: This option can improve hard disk\n" "accesses but is only for advanced users, it can ruin your hard drive if\n" "used incorrectly. Use it only if you know how.\n" "\n" " - Choose security level: You can choose a security level for your\n" "system.\n" " Please refer to the manual for more information.\n" "\n" " - Precise RAM size if needed: In some cases, Linux is unable to\n" "correctly detect all the installed RAM on some systems. If this is the\n" "case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n" "normal.\n" "\n" " - Removable media automounting: If you would prefer not to manually\n" "mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount and\n" "\"umount\", select this option. \n" "\n" " - Enable Num Lock at startup: If you want Number Lock enabled after\n" "booting, select this option (Note: Num Lock will still not work under\n" "X)." msgstr "" #: ../help.pm_.c:380 msgid "" "Your system is going to reboot.\n" "\n" "After rebooting, your new Linux Mandrake system will load automatically.\n" "If you want to boot into another existing operating system, please read\n" "the additional instructions." msgstr "" #: ../install2.pm_.c:42 msgid "Choose your language" msgstr "" #: ../install2.pm_.c:43 msgid "Select installation class" msgstr "" #: ../install2.pm_.c:44 msgid "Setup SCSI" msgstr "" #: ../install2.pm_.c:45 msgid "Choose install or upgrade" msgstr "" #: ../install2.pm_.c:46 msgid "Configure mouse" msgstr "" #: ../install2.pm_.c:47 msgid "Choose your keyboard" msgstr "" #: ../install2.pm_.c:48 msgid "Miscellaneous" msgstr "" #: ../install2.pm_.c:49 msgid "Setup filesystems" msgstr "" #: ../install2.pm_.c:50 msgid "Format partitions" msgstr "" #: ../install2.pm_.c:51 msgid "Choose packages to install" msgstr "" #: ../install2.pm_.c:52 msgid "Install system" msgstr "" #: ../install2.pm_.c:53 msgid "Configure networking" msgstr "" #: ../install2.pm_.c:54 msgid "Cryptographic" msgstr "" #: ../install2.pm_.c:55 msgid "Configure timezone" msgstr "" #: ../install2.pm_.c:57 msgid "Configure printer" msgstr "" #: ../install2.pm_.c:58 ../install_steps_interactive.pm_.c:485 #: ../install_steps_interactive.pm_.c:486 msgid "Set root password" msgstr "" #: ../install2.pm_.c:59 msgid "Add a user" msgstr "" #: ../install2.pm_.c:60 msgid "Create a bootdisk" msgstr "" #: ../install2.pm_.c:61 msgid "Install bootloader" msgstr "" #: ../install2.pm_.c:62 msgid "Configure X" msgstr "" #: ../install2.pm_.c:63 msgid "Exit install" msgstr "" #: ../install2.pm_.c:82 msgid "beginner" msgstr "" #: ../install2.pm_.c:82 msgid "developer" msgstr "" #: ../install2.pm_.c:82 msgid "expert" msgstr "" #: ../install2.pm_.c:82 msgid "server" msgstr "" #: ../install2.pm_.c:307 msgid "Partitioning failed: no root filesystem" msgstr "" #: ../install2.pm_.c:321 msgid "Not enough swap to fulfill installation, please add some" msgstr "" #: ../install_any.pm_.c:185 ../standalone/diskdrake_.c:61 msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I'll try to go on blanking bad partitions" msgstr "" #: ../install_any.pm_.c:201 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" #: ../install_any.pm_.c:211 msgid "Searching root partition." msgstr "" #: ../install_any.pm_.c:242 msgid "Information" msgstr "" #: ../install_any.pm_.c:243 #, c-format msgid "%s: This is not a root partition, please select another one." msgstr "" #: ../install_any.pm_.c:245 msgid "No root partition found" msgstr "" #: ../install_any.pm_.c:281 msgid "Can't use broadcast with no NIS domain" msgstr "" #: ../install_any.pm_.c:456 msgid "Error reading file $f" msgstr "" #: ../install_any.pm_.c:462 #, c-format msgid "Bad kickstart file %s (failed %s)" msgstr "" #: ../install_steps.pm_.c:68 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" #: ../install_steps.pm_.c:132 #, c-format msgid "Duplicate mount point %s" msgstr "" #: ../install_steps.pm_.c:502 msgid "No floppy drive available" msgstr "" #: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26 #, c-format msgid "Entering step `%s'\n" msgstr "" #: ../install_steps_gtk.pm_.c:258 msgid "" "WARNING!\n" "\n" "DrakX now needs to resize your Windows partition. Be careful: this operation " "is\n" "dangerous. If you have not already done so, you should first run scandisk " "(and\n" "optionally run defrag) on this partition and backup your data.\n" "When sure, press Ok." msgstr "" #: ../install_steps_gtk.pm_.c:276 msgid "Automatic resizing failed" msgstr "" #: ../install_steps_gtk.pm_.c:292 ../unused/install_steps_graphical.pm_.c:255 msgid "You must have a swap partition" msgstr "" #: ../install_steps_gtk.pm_.c:294 ../unused/install_steps_graphical.pm_.c:258 msgid "" "You don't have a swap partition\n" "\n" "Continue anyway?" msgstr "" #: ../install_steps_gtk.pm_.c:325 #, c-format msgid "Going to install %d MB. You can choose to install more programs" msgstr "" #: ../install_steps_gtk.pm_.c:326 msgid "You will be able to choose more precisely in next step" msgstr "" #: ../install_steps_gtk.pm_.c:328 msgid "Choose the size you want to install" msgstr "" #: ../install_steps_gtk.pm_.c:377 ../unused/install_steps_graphical.pm_.c:314 msgid "Total size: " msgstr "" #: ../install_steps_gtk.pm_.c:389 ../unused/install_steps_graphical.pm_.c:284 #, c-format msgid "Version: %s\n" msgstr "" #: ../install_steps_gtk.pm_.c:390 ../unused/install_steps_graphical.pm_.c:285 #, c-format msgid "Size: %d KB\n" msgstr "" #: ../install_steps_gtk.pm_.c:505 ../unused/install_steps_graphical.pm_.c:421 msgid "Choose the packages you want to install" msgstr "" #: ../install_steps_gtk.pm_.c:508 ../unused/install_steps_graphical.pm_.c:424 msgid "Info" msgstr "" #: ../install_steps_gtk.pm_.c:516 ../install_steps_interactive.pm_.c:80 #: ../unused/install_steps_graphical.pm_.c:432 msgid "Install" msgstr "" #: ../install_steps_gtk.pm_.c:535 ../install_steps_interactive.pm_.c:252 #: ../unused/install_steps_graphical.pm_.c:451 msgid "Installing" msgstr "" #: ../install_steps_gtk.pm_.c:538 msgid "Estimating" msgstr "" #: ../install_steps_gtk.pm_.c:542 ../unused/install_steps_graphical.pm_.c:457 msgid "Please wait, " msgstr "" #: ../install_steps_gtk.pm_.c:544 ../unused/install_steps_graphical.pm_.c:459 msgid "Time remaining " msgstr "" #: ../install_steps_gtk.pm_.c:545 ../unused/install_steps_graphical.pm_.c:460 msgid "Total time " msgstr "" #: ../install_steps_gtk.pm_.c:550 ../install_steps_interactive.pm_.c:252 #: ../unused/install_steps_graphical.pm_.c:465 msgid "Preparing installation" msgstr "" #: ../install_steps_gtk.pm_.c:560 #, c-format msgid "%d packages" msgstr "" #: ../install_steps_gtk.pm_.c:560 msgid ", %U MB" msgstr "" #: ../install_steps_gtk.pm_.c:565 ../unused/install_steps_graphical.pm_.c:486 #, c-format msgid "Installing package %s" msgstr "" #: ../install_steps_gtk.pm_.c:590 ../unused/install_steps_graphical.pm_.c:511 msgid "Go on anyway?" msgstr "" #: ../install_steps_gtk.pm_.c:590 ../unused/install_steps_graphical.pm_.c:511 msgid "There was an error ordering packages:" msgstr "" #: ../install_steps_interactive.pm_.c:36 msgid "An error occurred" msgstr "" #: ../install_steps_interactive.pm_.c:53 msgid "Which language do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:67 ../standalone/keyboarddrake_.c:22 msgid "Keyboard" msgstr "" #: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:23 msgid "What is your keyboard layout?" msgstr "" #: ../install_steps_interactive.pm_.c:78 msgid "Install/Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:79 msgid "Is this an install or an upgrade?" msgstr "" #: ../install_steps_interactive.pm_.c:80 msgid "Upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:88 msgid "Root Partition" msgstr "" #: ../install_steps_interactive.pm_.c:89 msgid "What is the root partition (/) of your system?" msgstr "" #: ../install_steps_interactive.pm_.c:99 msgid "Recommended" msgstr "" #: ../install_steps_interactive.pm_.c:100 msgid "Customized" msgstr "" #: ../install_steps_interactive.pm_.c:101 msgid "Expert" msgstr "" #: ../install_steps_interactive.pm_.c:103 #: ../install_steps_interactive.pm_.c:117 msgid "Install Class" msgstr "" #: ../install_steps_interactive.pm_.c:104 msgid "What installation class do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:113 msgid "Normal" msgstr "" #: ../install_steps_interactive.pm_.c:114 msgid "Developement" msgstr "" #: ../install_steps_interactive.pm_.c:115 msgid "Server" msgstr "" #: ../install_steps_interactive.pm_.c:118 msgid "What usage do you want?" msgstr "" #: ../install_steps_interactive.pm_.c:131 ../standalone/mousedrake_.c:25 msgid "What is the type of your mouse?" msgstr "" #: ../install_steps_interactive.pm_.c:139 ../standalone/mousedrake_.c:38 msgid "Mouse Port" msgstr "" #: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:39 msgid "Which serial port is your mouse connected to?" msgstr "" #: ../install_steps_interactive.pm_.c:156 msgid "no available partitions" msgstr "" #: ../install_steps_interactive.pm_.c:158 #, c-format msgid "(%dMb)" msgstr "" #: ../install_steps_interactive.pm_.c:165 msgid "Which partition do you want to use as your root partition" msgstr "" #: ../install_steps_interactive.pm_.c:172 msgid "Choose the mount points" msgstr "" #: ../install_steps_interactive.pm_.c:184 msgid "You need to reboot for the partition table modifications to take place" msgstr "" #: ../install_steps_interactive.pm_.c:203 msgid "Choose the partitions you want to format" msgstr "" #: ../install_steps_interactive.pm_.c:222 msgid "Looking for available packages" msgstr "" #: ../install_steps_interactive.pm_.c:228 msgid "Finding packages to upgrade" msgstr "" #: ../install_steps_interactive.pm_.c:237 msgid "Package Group Selection" msgstr "" #: ../install_steps_interactive.pm_.c:261 msgid "" "Installing package %s\n" "%d%%" msgstr "" #: ../install_steps_interactive.pm_.c:270 msgid "Post install configuration" msgstr "" #: ../install_steps_interactive.pm_.c:281 msgid "Keep the current IP configuration" msgstr "" #: ../install_steps_interactive.pm_.c:282 msgid "Reconfigure network now" msgstr "" #: ../install_steps_interactive.pm_.c:283 #: ../install_steps_interactive.pm_.c:295 msgid "Do not set up networking" msgstr "" #: ../install_steps_interactive.pm_.c:285 #: ../install_steps_interactive.pm_.c:293 msgid "Network Configuration" msgstr "" #: ../install_steps_interactive.pm_.c:286 msgid "Local networking has already been configured. Do you want to:" msgstr "" #: ../install_steps_interactive.pm_.c:294 msgid "Do you want to configure networking for your system?" msgstr "" #: ../install_steps_interactive.pm_.c:295 msgid "Dialup with modem" msgstr "" #: ../install_steps_interactive.pm_.c:295 msgid "Local LAN" msgstr "" #: ../install_steps_interactive.pm_.c:304 msgid "no network card found" msgstr "" #: ../install_steps_interactive.pm_.c:334 #, c-format msgid "Configuring network device %s" msgstr "" #: ../install_steps_interactive.pm_.c:335 msgid "" "Please enter the IP configuration for this machine.\n" "Each item should be entered as an IP address in dotted-decimal\n" "notation (for example, 1.2.3.4)." msgstr "" #: ../install_steps_interactive.pm_.c:338 msgid "Automatic IP" msgstr "" #: ../install_steps_interactive.pm_.c:338 msgid "IP address:" msgstr "" #: ../install_steps_interactive.pm_.c:338 msgid "Netmask:" msgstr "" #: ../install_steps_interactive.pm_.c:339 msgid "(bootp/dhcp)" msgstr "" #: ../install_steps_interactive.pm_.c:345 ../printerdrake.pm_.c:149 msgid "IP address should be in format 1.2.3.4" msgstr "" #: ../install_steps_interactive.pm_.c:363 msgid "Configuring network" msgstr "" #: ../install_steps_interactive.pm_.c:364 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" "such as ``mybox.mylab.myco.com''.\n" "You may also enter the IP address of the gateway if you have one" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "DNS server:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Gateway device:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Gateway:" msgstr "" #: ../install_steps_interactive.pm_.c:368 msgid "Host name:" msgstr "" #: ../install_steps_interactive.pm_.c:381 msgid "Try to find a modem?" msgstr "" #: ../install_steps_interactive.pm_.c:391 msgid "Which serial port is your modem connected to?" msgstr "" #: ../install_steps_interactive.pm_.c:396 msgid "Dialup options" msgstr "" #: ../install_steps_interactive.pm_.c:397 msgid "Connection name" msgstr "" #: ../install_steps_interactive.pm_.c:398 msgid "Phone number" msgstr "" #: ../install_steps_interactive.pm_.c:399 msgid "Login ID" msgstr "" #: ../install_steps_interactive.pm_.c:400 #: ../install_steps_interactive.pm_.c:487 #: ../install_steps_interactive.pm_.c:533 #: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:32 msgid "Password" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "Authentication" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "CHAP" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "PAP" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "Script-based" msgstr "" #: ../install_steps_interactive.pm_.c:401 msgid "Terminal-based" msgstr "" #: ../install_steps_interactive.pm_.c:402 msgid "Domain name" msgstr "" #: ../install_steps_interactive.pm_.c:403 msgid "First DNS Server" msgstr "" #: ../install_steps_interactive.pm_.c:404 msgid "Second DNS Server" msgstr "" #: ../install_steps_interactive.pm_.c:417 msgid "Bringing up the network" msgstr "" #: ../install_steps_interactive.pm_.c:432 msgid "Choose a mirror from which to get the packages" msgstr "" #: ../install_steps_interactive.pm_.c:437 msgid "Contacting the mirror to get the list of available packages" msgstr "" #: ../install_steps_interactive.pm_.c:441 msgid "Which packages do you want to install" msgstr "" #: ../install_steps_interactive.pm_.c:443 msgid "Downloading cryptographic packages" msgstr "" #: ../install_steps_interactive.pm_.c:453 msgid "Which is your timezone?" msgstr "" #: ../install_steps_interactive.pm_.c:454 msgid "Is your hardware clock set to GMT?" msgstr "" #: ../install_steps_interactive.pm_.c:464 msgid "Printer" msgstr "" #: ../install_steps_interactive.pm_.c:465 msgid "Would you like to configure a printer?" msgstr "" #: ../install_steps_interactive.pm_.c:485 msgid "No password" msgstr "" #: ../install_steps_interactive.pm_.c:485 #: ../install_steps_interactive.pm_.c:699 ../interactive.pm_.c:74 #: ../interactive.pm_.c:84 ../interactive.pm_.c:163 #: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:94 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:423 #: ../my_gtk.pm_.c:523 ../unused/install_steps_graphical.pm_.c:608 msgid "Ok" msgstr "" #: ../install_steps_interactive.pm_.c:488 #: ../install_steps_interactive.pm_.c:534 ../standalone/adduserdrake_.c:33 msgid "Password (again)" msgstr "" #: ../install_steps_interactive.pm_.c:490 msgid "Use shadow file" msgstr "" #: ../install_steps_interactive.pm_.c:490 msgid "shadow" msgstr "" #: ../install_steps_interactive.pm_.c:491 msgid "MD5" msgstr "" #: ../install_steps_interactive.pm_.c:491 msgid "Use MD5 passwords" msgstr "" #: ../install_steps_interactive.pm_.c:493 msgid "Use NIS" msgstr "" #: ../install_steps_interactive.pm_.c:493 msgid "yellow pages" msgstr "" #: ../install_steps_interactive.pm_.c:497 #: ../install_steps_interactive.pm_.c:545 ../standalone/adduserdrake_.c:44 msgid "Please try again" msgstr "" #: ../install_steps_interactive.pm_.c:497 #: ../install_steps_interactive.pm_.c:545 ../standalone/adduserdrake_.c:44 msgid "The passwords do not match" msgstr "" #: ../install_steps_interactive.pm_.c:499 #: ../install_steps_interactive.pm_.c:546 ../standalone/adduserdrake_.c:45 msgid "This password is too simple" msgstr "" #: ../install_steps_interactive.pm_.c:506 msgid "Authentification NIS" msgstr "" #: ../install_steps_interactive.pm_.c:507 msgid "NIS Domain" msgstr "" #: ../install_steps_interactive.pm_.c:507 msgid "NIS Server" msgstr "" #: ../install_steps_interactive.pm_.c:527 ../standalone/adduserdrake_.c:26 msgid "Accept user" msgstr "" #: ../install_steps_interactive.pm_.c:527 ../standalone/adduserdrake_.c:26 msgid "Add user" msgstr "" #: ../install_steps_interactive.pm_.c:528 ../standalone/adduserdrake_.c:27 #, c-format msgid "(already added %s)" msgstr "" #: ../install_steps_interactive.pm_.c:528 ../standalone/adduserdrake_.c:27 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" #: ../install_steps_interactive.pm_.c:530 ../standalone/adduserdrake_.c:29 msgid "Real name" msgstr "" #: ../install_steps_interactive.pm_.c:531 ../standalone/adduserdrake_.c:30 msgid "User name" msgstr "" #: ../install_steps_interactive.pm_.c:536 ../standalone/adduserdrake_.c:35 msgid "Shell" msgstr "" #: ../install_steps_interactive.pm_.c:547 ../standalone/adduserdrake_.c:46 msgid "Please give a user name" msgstr "" #: ../install_steps_interactive.pm_.c:548 ../standalone/adduserdrake_.c:47 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" #: ../install_steps_interactive.pm_.c:549 ../standalone/adduserdrake_.c:48 msgid "This user name is already added" msgstr "" #: ../install_steps_interactive.pm_.c:570 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO on your system, or another operating system removes LILO, or LILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?" msgstr "" #: ../install_steps_interactive.pm_.c:579 msgid "Sorry, no floppy drive available" msgstr "" #: ../install_steps_interactive.pm_.c:582 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:583 msgid "Skip" msgstr "" #: ../install_steps_interactive.pm_.c:587 #, c-format msgid "Insert a floppy in drive %s" msgstr "" #: ../install_steps_interactive.pm_.c:588 msgid "Creating bootdisk" msgstr "" #: ../install_steps_interactive.pm_.c:595 msgid "Preparing bootloader" msgstr "" #: ../install_steps_interactive.pm_.c:607 msgid "First sector of boot partition" msgstr "" #: ../install_steps_interactive.pm_.c:607 msgid "First sector of drive (MBR)" msgstr "" #: ../install_steps_interactive.pm_.c:612 msgid "LILO Installation" msgstr "" #: ../install_steps_interactive.pm_.c:613 msgid "Where do you want to install the bootloader?" msgstr "" #: ../install_steps_interactive.pm_.c:618 msgid "Do you want to use LILO?" msgstr "" #: ../install_steps_interactive.pm_.c:621 msgid "Boot device" msgstr "" #: ../install_steps_interactive.pm_.c:622 msgid "Linear (needed for some SCSI drives)" msgstr "" #: ../install_steps_interactive.pm_.c:622 msgid "linear" msgstr "" #: ../install_steps_interactive.pm_.c:623 msgid "Compact" msgstr "" #: ../install_steps_interactive.pm_.c:623 msgid "compact" msgstr "" #: ../install_steps_interactive.pm_.c:624 msgid "Delay before booting default image" msgstr "" #: ../install_steps_interactive.pm_.c:625 msgid "Video mode" msgstr "" #: ../install_steps_interactive.pm_.c:628 msgid "Restrict command line options" msgstr "" #: ../install_steps_interactive.pm_.c:628 msgid "restrict" msgstr "" #: ../install_steps_interactive.pm_.c:634 msgid "LILO main options" msgstr "" #: ../install_steps_interactive.pm_.c:637 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" #: ../install_steps_interactive.pm_.c:647 msgid "" "Here are the following entries in LILO.\n" "You can add some more or change the existing ones." msgstr "" #: ../install_steps_interactive.pm_.c:649 msgid "Add" msgstr "" #: ../install_steps_interactive.pm_.c:658 msgid "Linux" msgstr "" #: ../install_steps_interactive.pm_.c:658 msgid "Other OS (windows...)" msgstr "" #: ../install_steps_interactive.pm_.c:658 msgid "Which type of entry do you want to add" msgstr "" #: ../install_steps_interactive.pm_.c:678 msgid "Image" msgstr "" #: ../install_steps_interactive.pm_.c:679 #: ../install_steps_interactive.pm_.c:687 msgid "Root" msgstr "" #: ../install_steps_interactive.pm_.c:680 msgid "Append" msgstr "" #: ../install_steps_interactive.pm_.c:681 msgid "Initrd" msgstr "" #: ../install_steps_interactive.pm_.c:682 msgid "Read-write" msgstr "" #: ../install_steps_interactive.pm_.c:688 msgid "Table" msgstr "" #: ../install_steps_interactive.pm_.c:689 msgid "Unsafe" msgstr "" #: ../install_steps_interactive.pm_.c:694 msgid "Label" msgstr "" #: ../install_steps_interactive.pm_.c:696 msgid "Default" msgstr "" #: ../install_steps_interactive.pm_.c:699 msgid "Remove entry" msgstr "" #: ../install_steps_interactive.pm_.c:702 msgid "Empty label not allowed" msgstr "" #: ../install_steps_interactive.pm_.c:703 msgid "This label is already in use" msgstr "" #: ../install_steps_interactive.pm_.c:704 #, c-format msgid "A entry %s already exists" msgstr "" #: ../install_steps_interactive.pm_.c:718 msgid "Installation of LILO failed. The following error occured:" msgstr "" #: ../install_steps_interactive.pm_.c:732 msgid "Proxies configuration" msgstr "" #: ../install_steps_interactive.pm_.c:733 msgid "HTTP proxy" msgstr "" #: ../install_steps_interactive.pm_.c:734 msgid "FTP proxy" msgstr "" #: ../install_steps_interactive.pm_.c:740 msgid "Proxy should be http://..." msgstr "" #: ../install_steps_interactive.pm_.c:741 msgid "Proxy should be ftp://..." msgstr "" #: ../install_steps_interactive.pm_.c:752 ../standalone/draksec_.c:21 msgid "Poor" msgstr "" #: ../install_steps_interactive.pm_.c:753 ../standalone/draksec_.c:22 msgid "Low" msgstr "" #: ../install_steps_interactive.pm_.c:754 ../standalone/draksec_.c:23 msgid "Medium" msgstr "" #: ../install_steps_interactive.pm_.c:755 ../standalone/draksec_.c:24 msgid "High" msgstr "" #: ../install_steps_interactive.pm_.c:756 ../standalone/draksec_.c:25 msgid "Paranoid" msgstr "" #: ../install_steps_interactive.pm_.c:769 msgid "Miscellaneous questions" msgstr "" #: ../install_steps_interactive.pm_.c:770 msgid "(may cause data corruption)" msgstr "" #: ../install_steps_interactive.pm_.c:770 msgid "Use hard drive optimisations?" msgstr "" #: ../install_steps_interactive.pm_.c:771 ../standalone/draksec_.c:29 msgid "Choose security level" msgstr "" #: ../install_steps_interactive.pm_.c:772 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "" #: ../install_steps_interactive.pm_.c:773 msgid "Removable media automounting" msgstr "" #: ../install_steps_interactive.pm_.c:775 msgid "Enable num lock at startup" msgstr "" #: ../install_steps_interactive.pm_.c:778 msgid "Give the ram size in Mb" msgstr "" #: ../install_steps_interactive.pm_.c:794 #: ../unused/install_steps_graphical.pm_.c:535 msgid "Use existing configuration for X11?" msgstr "" #: ../install_steps_interactive.pm_.c:806 #: ../install_steps_interactive.pm_.c:919 msgid "Try to find PCI devices?" msgstr "" #: ../install_steps_interactive.pm_.c:821 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" #: ../install_steps_interactive.pm_.c:828 msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "For information on fixes which are available for this release of " "Linux-Mandrake,\n" "consult the Errata available from http://www.linux-mandrake.com/.\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Linux-Mandrake User's Guide." msgstr "" #: ../install_steps_interactive.pm_.c:837 msgid "Shutting down" msgstr "" #: ../install_steps_interactive.pm_.c:851 #, c-format msgid "Installing driver for %s card %s" msgstr "" #: ../install_steps_interactive.pm_.c:852 #, c-format msgid "(module %s)" msgstr "" #: ../install_steps_interactive.pm_.c:862 #, c-format msgid "Which %s driver should I try?" msgstr "" #: ../install_steps_interactive.pm_.c:870 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" #: ../install_steps_interactive.pm_.c:875 msgid "Autoprobe" msgstr "" #: ../install_steps_interactive.pm_.c:875 msgid "Specify options" msgstr "" #: ../install_steps_interactive.pm_.c:879 #, c-format msgid "You may now provide its options to module %s." msgstr "" #: ../install_steps_interactive.pm_.c:885 #, c-format msgid "" "You may now provide its options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" #: ../install_steps_interactive.pm_.c:888 msgid "Module options:" msgstr "" #: ../install_steps_interactive.pm_.c:898 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" #: ../install_steps_interactive.pm_.c:911 msgid "Try to find PCMCIA cards?" msgstr "" #: ../install_steps_interactive.pm_.c:912 msgid "Configuring PCMCIA cards..." msgstr "" #: ../install_steps_interactive.pm_.c:912 msgid "PCMCIA" msgstr "" #: ../install_steps_interactive.pm_.c:923 #, c-format msgid "Found %s %s interfaces" msgstr "" #: ../install_steps_interactive.pm_.c:924 msgid "Do you have another one?" msgstr "" #: ../install_steps_interactive.pm_.c:925 #, c-format msgid "Do you have any %s interface?" msgstr "" #: ../install_steps_interactive.pm_.c:927 ../interactive.pm_.c:79 #: ../my_gtk.pm_.c:422 ../printerdrake.pm_.c:176 msgid "No" msgstr "" #: ../install_steps_interactive.pm_.c:927 ../interactive.pm_.c:79 #: ../my_gtk.pm_.c:422 msgid "Yes" msgstr "" #: ../install_steps_interactive.pm_.c:928 msgid "See hardware info" msgstr "" #: ../install_steps_newt.pm_.c:19 #, c-format msgid "Linux-Mandrake Installation %s" msgstr "" #: ../install_steps_newt.pm_.c:30 msgid "" " / between elements | selects | next screen " msgstr "" #: ../interactive.pm_.c:84 ../interactive.pm_.c:162 #: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:94 #: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:423 msgid "Cancel" msgstr "" #: ../interactive.pm_.c:180 msgid "Please wait" msgstr "" #: ../interactive_stdio.pm_.c:35 #, c-format msgid "Ambiguity (%s), be more precise\n" msgstr "" #: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51 #: ../interactive_stdio.pm_.c:70 msgid "Bad choice, try again\n" msgstr "" #: ../interactive_stdio.pm_.c:39 #, c-format msgid " ? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:52 #, c-format msgid "Your choice? (default %s) " msgstr "" #: ../interactive_stdio.pm_.c:71 #, c-format msgid "Your choice? (default %s enter `none' for none) " msgstr "" #: ../keyboard.pm_.c:30 msgid "Armenian" msgstr "" #: ../keyboard.pm_.c:31 msgid "Belgian" msgstr "" #: ../keyboard.pm_.c:32 msgid "Bulgarian" msgstr "" #: ../keyboard.pm_.c:33 msgid "Brazilian" msgstr "" #: ../keyboard.pm_.c:34 msgid "Swiss (French layout)" msgstr "" #: ../keyboard.pm_.c:35 msgid "Swiss (German layout)" msgstr "" #: ../keyboard.pm_.c:36 msgid "Czech" msgstr "" #: ../keyboard.pm_.c:37 msgid "German" msgstr "" #: ../keyboard.pm_.c:38 msgid "Danish" msgstr "" #: ../keyboard.pm_.c:39 msgid "Dvorak" msgstr "" #: ../keyboard.pm_.c:40 msgid "Estonian" msgstr "" #: ../keyboard.pm_.c:41 msgid "Spanish" msgstr "" #: ../keyboard.pm_.c:42 msgid "Finnish" msgstr "" #: ../keyboard.pm_.c:43 msgid "French" msgstr "" #: ../keyboard.pm_.c:44 msgid "Georgian (\"Russian\" layout)" msgstr "" #: ../keyboard.pm_.c:45 msgid "Georgian (\"Latin\" layout)" msgstr "" #: ../keyboard.pm_.c:46 msgid "Greek" msgstr "" #: ../keyboard.pm_.c:47 msgid "Hungarian" msgstr "" #: ../keyboard.pm_.c:48 msgid "Israeli" msgstr "" #: ../keyboard.pm_.c:49 msgid "Israeli (Phonetic)" msgstr "" #: ../keyboard.pm_.c:50 msgid "Icelandic" msgstr "" #: ../keyboard.pm_.c:51 msgid "Italian" msgstr "" #: ../keyboard.pm_.c:52 msgid "Latin American" msgstr "" #: ../keyboard.pm_.c:53 msgid "Dutch" msgstr "" #: ../keyboard.pm_.c:54 msgid "Lithuanian AZERTY" msgstr "" #: ../keyboard.pm_.c:55 msgid "Lithuanian \"number row\" QWERTY" msgstr "" #: ../keyboard.pm_.c:56 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "" #: ../keyboard.pm_.c:57 msgid "Norwegian" msgstr "" #: ../keyboard.pm_.c:58 msgid "Polish" msgstr "" #: ../keyboard.pm_.c:59 msgid "Portuguese" msgstr "" #: ../keyboard.pm_.c:60 msgid "Canadian (Quebec)" msgstr "" #: ../keyboard.pm_.c:61 msgid "Russian" msgstr "" #: ../keyboard.pm_.c:62 msgid "Russian (Yawerty)" msgstr "" #: ../keyboard.pm_.c:63 msgid "Swedish" msgstr "" #: ../keyboard.pm_.c:64 msgid "Slovenian" msgstr "" #: ../keyboard.pm_.c:65 msgid "Slovakian" msgstr "" #: ../keyboard.pm_.c:66 msgid "Thai keyboard" msgstr "" #: ../keyboard.pm_.c:67 msgid "Turkish (traditional \"F\" model)" msgstr "" #: ../keyboard.pm_.c:68 msgid "Turkish (modern \"Q\" model)" msgstr "" #: ../keyboard.pm_.c:69 msgid "Ukrainian" msgstr "" #: ../keyboard.pm_.c:70 msgid "UK keyboard" msgstr "" #: ../keyboard.pm_.c:71 msgid "US keyboard" msgstr "" #: ../keyboard.pm_.c:72 msgid "US keyboard (international)" msgstr "" #: ../keyboard.pm_.c:73 msgid "Yugoslavian (latin layout)" msgstr "" #: ../lilo.pm_.c:141 #, c-format msgid "" "Welcome to LILO the operating system chooser!\n" "\n" "To list the possible choices, press .\n" "\n" "To load one of them, write its name and press or wait %d seconds for " "default boot.\n" "\n" msgstr "" #: ../mouse.pm_.c:20 msgid "No Mouse" msgstr "" #: ../mouse.pm_.c:21 msgid "Microsoft Rev 2.1A or higher (serial)" msgstr "" #: ../mouse.pm_.c:22 msgid "Logitech CC Series (serial)" msgstr "" #: ../mouse.pm_.c:23 msgid "Logitech MouseMan+/FirstMouse+ (serial)" msgstr "" #: ../mouse.pm_.c:24 msgid "ASCII MieMouse (serial)" msgstr "" #: ../mouse.pm_.c:25 msgid "Genius NetMouse (serial)" msgstr "" #: ../mouse.pm_.c:26 msgid "Microsoft IntelliMouse (serial)" msgstr "" #: ../mouse.pm_.c:27 msgid "MM Series (serial)" msgstr "" #: ../mouse.pm_.c:28 msgid "MM HitTablet (serial)" msgstr "" #: ../mouse.pm_.c:29 msgid "Logitech Mouse (serial, old C7 type)" msgstr "" #: ../mouse.pm_.c:30 msgid "Logitech MouseMan/FirstMouse (serial)" msgstr "" #: ../mouse.pm_.c:31 msgid "Generic Mouse (serial)" msgstr "" #: ../mouse.pm_.c:32 msgid "Microsoft compatible (serial)" msgstr "" #: ../mouse.pm_.c:33 msgid "Generic 3 Button Mouse (serial)" msgstr "" #: ../mouse.pm_.c:34 msgid "Mouse Systems (serial)" msgstr "" #: ../mouse.pm_.c:35 msgid "Generic Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:36 msgid "Logitech MouseMan/FirstMouse (ps/2)" msgstr "" #: ../mouse.pm_.c:37 msgid "Generic 3 Button Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:38 msgid "ALPS GlidePoint (PS/2)" msgstr "" #: ../mouse.pm_.c:39 msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" msgstr "" #: ../mouse.pm_.c:40 msgid "Kensington Thinking Mouse (PS/2)" msgstr "" #: ../mouse.pm_.c:41 msgid "ASCII MieMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:42 msgid "Genius NetMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:43 msgid "Genius NetMouse Pro (PS/2)" msgstr "" #: ../mouse.pm_.c:44 msgid "Genius NetScroll (PS/2)" msgstr "" #: ../mouse.pm_.c:45 msgid "Microsoft IntelliMouse (PS/2)" msgstr "" #: ../mouse.pm_.c:46 msgid "ATI Bus Mouse" msgstr "" #: ../mouse.pm_.c:47 msgid "Microsoft Bus Mouse" msgstr "" #: ../mouse.pm_.c:48 msgid "Logitech Bus Mouse" msgstr "" #: ../mouse.pm_.c:49 msgid "USB Mouse" msgstr "" #: ../mouse.pm_.c:50 msgid "USB Mouse (3 buttons or more)" msgstr "" #: ../partition_table.pm_.c:480 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " "to the extended partitions" msgstr "" #: ../partition_table.pm_.c:566 #, c-format msgid "Error reading file %s" msgstr "" #: ../partition_table.pm_.c:573 #, c-format msgid "Restoring from file %s failed: %s" msgstr "" #: ../partition_table.pm_.c:575 msgid "Bad backup file" msgstr "" #: ../partition_table.pm_.c:596 #, c-format msgid "Error writing to file %s" msgstr "" #: ../printer.pm_.c:244 msgid "Local printer" msgstr "" #: ../printer.pm_.c:245 msgid "Remote lpd" msgstr "" #: ../printer.pm_.c:246 msgid "SMB/Windows 95/98/NT" msgstr "" #: ../printer.pm_.c:247 msgid "NetWare" msgstr "" #: ../printerdrake.pm_.c:75 msgid "Local Printer Options" msgstr "" #: ../printerdrake.pm_.c:76 msgid "" "Every print queue (which print jobs are directed to) needs a\n" "name (often lp) and a spool directory associated with it. What\n" "name and directory should be used for this queue?" msgstr "" #: ../printerdrake.pm_.c:79 msgid "Name of queue:" msgstr "" #: ../printerdrake.pm_.c:79 msgid "Spool directory:" msgstr "" #: ../printerdrake.pm_.c:90 msgid "Select Printer Connection" msgstr "" #: ../printerdrake.pm_.c:91 msgid "How is the printer connected?" msgstr "" #: ../printerdrake.pm_.c:99 msgid "Detecting devices..." msgstr "" #: ../printerdrake.pm_.c:99 msgid "Test ports" msgstr "" #: ../printerdrake.pm_.c:112 #, c-format msgid "A printer, model \"%s\", has been detected on " msgstr "" #: ../printerdrake.pm_.c:119 msgid "Local Printer Device" msgstr "" #: ../printerdrake.pm_.c:120 msgid "" "What device is your printer connected to \n" "(note that /dev/lp0 is equivalent to LPT1:)?\n" msgstr "" #: ../printerdrake.pm_.c:121 msgid "Printer Device:" msgstr "" #: ../printerdrake.pm_.c:125 msgid "Remote lpd Printer Options" msgstr "" #: ../printerdrake.pm_.c:126 msgid "" "To use a remote lpd print queue, you need to supply\n" "the hostname of the printer server and the queue name\n" "on that server which jobs should be placed in." msgstr "" #: ../printerdrake.pm_.c:129 msgid "Remote hostname:" msgstr "" #: ../printerdrake.pm_.c:129 msgid "Remote queue" msgstr "" #: ../printerdrake.pm_.c:134 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "" #: ../printerdrake.pm_.c:135 msgid "" "To print to a SMB printer, you need to provide the\n" "SMB host name (Note! It may be different from its\n" "TCP/IP hostname!) and possibly the IP address of the print server, as\n" "well as the share name for the printer you wish to access and any\n" "applicable user name, password, and workgroup information." msgstr "" #: ../printerdrake.pm_.c:140 msgid "SMB server IP:" msgstr "" #: ../printerdrake.pm_.c:140 msgid "SMB server host:" msgstr "" #: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 msgid "Password:" msgstr "" #: ../printerdrake.pm_.c:141 msgid "Share name:" msgstr "" #: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 msgid "User name:" msgstr "" #: ../printerdrake.pm_.c:142 msgid "Workgroup:" msgstr "" #: ../printerdrake.pm_.c:157 msgid "NetWare Printer Options" msgstr "" #: ../printerdrake.pm_.c:158 msgid "" "To print to a NetWare printer, you need to provide the\n" "NetWare print server name (Note! it may be different from its\n" "TCP/IP hostname!) as well as the print queue name for the printer you\n" "wish to access and any applicable user name and password." msgstr "" #: ../printerdrake.pm_.c:162 msgid "Print Queue Name:" msgstr "" #: ../printerdrake.pm_.c:162 msgid "Printer Server:" msgstr "" #: ../printerdrake.pm_.c:173 msgid "Yes, print ASCII test page" msgstr "" #: ../printerdrake.pm_.c:174 msgid "Yes, print PostScript test page" msgstr "" #: ../printerdrake.pm_.c:175 msgid "Yes, print both test pages" msgstr "" #: ../printerdrake.pm_.c:183 msgid "Configure Printer" msgstr "" #: ../printerdrake.pm_.c:184 msgid "What type of printer do you have?" msgstr "" #: ../printerdrake.pm_.c:206 msgid "Printer options" msgstr "" #: ../printerdrake.pm_.c:207 msgid "Paper Size" msgstr "" #: ../printerdrake.pm_.c:208 msgid "Eject page after job?" msgstr "" #: ../printerdrake.pm_.c:211 msgid "Fix stair-stepping text?" msgstr "" #: ../printerdrake.pm_.c:214 msgid "Uniprint driver options" msgstr "" #: ../printerdrake.pm_.c:215 msgid "Color depth options" msgstr "" #: ../printerdrake.pm_.c:225 msgid "Do you want to test printing?" msgstr "" #: ../printerdrake.pm_.c:236 msgid "Printing test page(s)..." msgstr "" #: ../printerdrake.pm_.c:254 #, c-format msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly? Printing status:\n" "%s" msgstr "" #: ../printerdrake.pm_.c:258 msgid "" "Test page(s) have been sent to the printer daemon.\n" "This may take a little time before printer start.\n" "Does it work properly?" msgstr "" #: ../raid.pm_.c:36 #, c-format msgid "Can't add a partition to _formatted_ RAID md%d" msgstr "" #: ../raid.pm_.c:106 msgid "Can't write file $file" msgstr "" #: ../raid.pm_.c:146 #, c-format msgid "Not enough partitions for RAID level %d\n" msgstr "" #: ../standalone/draksec_.c:20 msgid "Windows(TM)" msgstr "" #: ../standalone/draksec_.c:30 msgid "Setting security level" msgstr "" #: ../standalone/drakxconf_.c:21 msgid "Choose the tool you want to use" msgstr "" #: ../standalone/drakxservices_.c:20 msgid "Choose which services should be automatically started at boot time" msgstr "" #: ../standalone/mousedrake_.c:30 msgid "no serial_usb found\n" msgstr "" #: ../standalone/mousedrake_.c:35 msgid "Emulate third button?" msgstr "" #: ../unused/install_steps_graphical.pm_.c:433 msgid "Show less" msgstr "" #: ../unused/install_steps_graphical.pm_.c:434 msgid "Show more" msgstr ""