package scanner; # scanner.pm $Id$ # Yves Duret # Copyright (C) 2001-2002 MandrakeSoft # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # pbs/TODO: # - scsi mis-configuration (should work better now) # - devfs use dev_is_devfs() # - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !! (should work now) # - lp: see printerdrake # - install: prefix --> done (partially) use common; use detect_devices; use log; use handle_configs; my $sanedir = "$::prefix/etc/sane.d"; my $scannerDBdir = "$::prefix$ENV{SHARE_PATH}/ldetect-lst"; our $scannerDB = readScannerDB("$scannerDBdir/ScannerDB"); sub confScanner { my ($model, $port, $vendor, $product) = @_; $port ||= detect_devices::dev_is_devfs() ? "$::prefix/dev/usb/scanner0" : "$::prefix/dev/scanner"; my $a = $scannerDB->{$model}{server}; #print "file:[$a]\t[$model]\t[$port]\n| ", (join "\n| ", @{$scannerDB->{$model}{lines}}),"\n"; my @driverconf = cat_("$sanedir/$a.conf"); my @configlines = @{$scannerDB->{$model}{lines}}; foreach my $line (@configlines) { $line =~ s/\$DEVICE/$port/g if $port; next if $line =~ /\$DEVICE/; $line =~ s/\$VENDOR/$vendor/g if $vendor; next if $line =~ /\$VENDOR/; $line =~ s/\$PRODUCT/$product/g if $product; next if $line =~ /\$PRODUCT/; my $linetype; if ($line =~ /^(\S*)LINE\s+(.*?)$/) { $linetype = $1; $line = $2; } next if !$line; if (!$linetype || ($linetype eq "USB" && ($port =~ /usb/i || $vendor)) || ($linetype eq "PARPORT" && !$vendor && $port =~ /(parport|pt_drv|parallel)/i) || ($linetype eq "SCSI" && !$vendor && $port =~ m!(/sg|scsi|/scanner)!i)) { handle_configs::set_directive(\@driverconf, $line, 1); } } output("$sanedir/$a.conf", @driverconf); add2dll($a); } sub add2dll { return if member($_[0], chomp_(cat_("$sanedir/dll.conf"))); my @dllconf = cat_("$sanedir/dll.conf"); handle_configs::add_directive(\@dllconf, $_[0]); output("$sanedir/dll.conf", @dllconf); } sub configured() { my @res; # Run "scanimage -L", to find the scanners which are already working local *LIST; open LIST, "LC_ALL=C scanimage -L |"; while (my $line = ) { if ($line =~ /^\s*device\s*`([^`']+)'\s+is\s+a\s+(\S.*)$/) { # Extract port and description my $port = $1; my $description = $2; # Remove duplicate scanners appearing through saned and the # "net" backend next if $port =~ /^net:(localhost|127.0.0.1):/; # Store collected data push @res, { port => $port, val => { DESCRIPTION => $description, } }; } } close LIST; return @res; } sub detect { my @configured = @_; my @res; # Run "sane-find-scanner", this also detects USB scanners which only # work with libusb. local *DETECT; open DETECT, "LC_ALL=C sane-find-scanner -q |"; while (my $line = ) { my ($vendorid, $productid, $make, $model, $description, $port); if ($line =~ /^\s*found\s+USB\s+scanner/i) { # Found an USB scanner if ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f\[]+[^\[]*\[([^\[\]]+)\].*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f\[]+[^\[]*\[([^\[\]]+)\]/) { # Scanner connected via libusb $vendorid = $1; $make = $2; $productid = $4; $model = $5; $description = "$make|$model"; } elsif ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f]+.*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f]+/) { # Scanner connected via scanner.o kernel module $vendorid = $1; $productid = $3; } if ($vendorid && $productid) { # We have vendor and product ID, look up the scanner in # the usbtable foreach my $entry (cat_("$scannerDBdir/usbtable")) { if ($entry =~ /^\s*$vendorid\s+$productid\s+.*\"([^\"]+)\"\s*$/) { $description = $1; $description =~ s/Seiko\s+Epson/Epson/i; if ($description =~ /^([^\|]+)\|(.*)$/) { $make = $1; $model = $2; } last; } } } } elsif ($line =~ /^\s*found\s+SCSI/i) { # SCSI scanner if ($line =~ /\"([^\"\s]+)\s+([^\"]+?)\s+([^\"\s]+)\"/) { $make = $1; $model = $2; $description = "$make|$model"; } } else { # Comment line in output of "sane-find-scanner" next; } # The Alcatel Speed Touch internet scanner is not supported by # SANE next if $description =~ /Alcatel.*Speed.*Touch|Camera|ISDN|ADSL/i; # Extract port $port = $1 if $line =~ /\s+(\S+)\s*$/; # Check for duplicate (scanner.o/libusb) if ($port =~ /^libusb/) { my $duplicate = 0; foreach (@res) { if ($_->{val}{vendor} eq $vendorid && $_->{val}{id} eq $productid && $_->{port} =~ /dev.*usb.*scanner/ && !defined($_->{port2})) { # Duplicate entry found, merge the entries $_->{port2} = $port; $_->{val}{MANUFACTURER} ||= $make; $_->{val}{MODEL} ||= $model; $_->{val}{DESCRIPTION} ||= $description; $duplicate = 1; last; } } next if $duplicate; } # Store collected data push @res, { port => $port, val => { CLASS => 'SCANNER', MODEL => $model, MANUFACTURER => $make, DESCRIPTION => $description, id => $productid, vendor => $vendorid, } }; } close DETECT; if (@configured) { # Remove scanners which are already working foreach my $d (@res) { my $searchport1 = handle_configs::searchstr(resolve_symlinks($d->{port})); my $searchport2 = handle_configs::searchstr(resolve_symlinks($d->{port2})); foreach my $c (@configured) { my $currentport = resolve_symlinks($c->{port}); if ($currentport =~ /$searchport1$/ || $searchport2 && $currentport =~ /$searchport2$/) { $d->{configured} = 1; last; } } } @res = grep { ! $_->{configured} } @res; } return @res; } sub resolve_symlinks { # Check if a given file (either the pure filename or in a SANE device # string as ":") is a symlink, if so expand the link. # If the new file name is a link, expand again, until finding the # physical file. my ($file) = @_; my $prefix = ""; if ($file =~ m!^([^/]*)(/.*)$!) { $prefix = $1; $file = $2; } else { return $file; } while (1) { my $ls = `ls -l $file`; if ($ls =~ m!\s($file)\s*\->\s*(\S+)\s*$!) { my $target = $2; if ($target !~ m!^/! && $file =~ m!^(.*)/[^/]+$!) { $target = "$1/$target"; } $file = $target; } else { last; } } return $prefix . $file; } sub get_usb_ids_for_port { my ($port) = @_; local *DETECT; if ($port =~ /^\s*libusb:(\d+):(\d+)\s*$/) { # Use "lsusb" to find the USB IDs open DETECT, "LC_ALL=C lsusb -s $1:$2 |"; while (my $line = ) { if ($line =~ /ID\s+([0-9a-f]+):(0x[0-9a-f]+)($|\s+)/) { # Scanner connected via scanner.o kernel module return ("0x$1", "0x$2"); last; } } } else { # Run "sane-find-scanner" on the port open DETECT, "LC_ALL=C sane-find-scanner -q $port |"; while (my $line = ) { if ($line =~ /^\s*found\s+USB\s+scanner/i) { if ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f]+.*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f]+/) { # Scanner connected via scanner.o kernel module return ($1, $3); } } } } } sub readScannerDB { my ($file) = @_; my ($card, %cards); my $F = common::openFileMaybeCompressed($file); my ($lineno, $cmd, $val) = 0; my $fs = { LINE => sub { push @{$card->{lines}}, "LINE $val" }, SCSILINE => sub { push @{$card->{lines}}, "SCSILINE $val" }, USBLINE => sub { push @{$card->{lines}}, "USBLINE $val" }, PARPORTLINE => sub { push @{$card->{lines}}, "PARPORTLINE $val" }, NAME => sub { #$cards{$card->{type}} = $card if ($card and !$card->{flags}{unsupported}); $cards{$card->{type}} = $card if $card; $val =~ s/Seiko\s+Epson/Epson/i; $card = { type => $val }; }, SEE => sub { $val =~ s/Seiko\s+Epson/Epson/i; my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno"; push @{$card->{lines}}, @{$c->{lines} || []}; add2hash($card->{flags}, $c->{flags}); add2hash($card, $c); }, ASK => sub { $card->{ask} = $val }, SERVER => sub { $card->{server} = $val }, DRIVER => sub { $card->{driver} = $val }, UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 }, COMMENT => sub {}, }; local $_; while (<$F>) { $lineno++; s/\s+$//; /^#/ and next; /^$/ and next; /^END/ and do { $cards{$card->{type}} = $card if $card; last }; ($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next; my $f = $fs->{$cmd}; $f ? $f->() : log::l("unknown line $lineno ($_)"); } \%cards; } sub updateScannerDBfromUsbtable() { substInFile { s/END// } "ScannerDB"; my $to_add = "# generated from usbtable by scannerdrake\n"; foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) { my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4); next if $mod ne '"scanner"'; $name =~ s/\"(.*)\"$/$1/; if (member($name, keys %$scanner::scannerDB)) { print "#[$name] already in ScannerDB!\n"; next; } $to_add .= "NAME $name\nDRIVER USB\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n"; } $to_add .= "END\n"; append_to_file("ScannerDB", $to_add); } sub updateScannerDBfromSane { my ($sanesrcdir) = @_; substInFile { s/END// } "ScannerDB"; my $to_add = "# generated from Sane by scannerdrake\n"; # for compat with our usbtable my $sane2DB = { "Acer" => "Acer Peripherals Inc.", "AGFA" => "AGFA-Gevaert NV", "Agfa" => "AGFA-Gevaert NV", "Epson" => "Epson Corp.", "Fujitsu Computer Products of America" => "Fujitsu", "HP" => sub { $_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0] }, "Hewlett-Packard" => sub { $_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/ or $_[0] = "Hewlett-Packard|$_[0]"; $_[0] }, "Kodak" => "Kodak Co.", "Mustek" => "Mustek Systems Inc.", "NEC" => "NEC Systems", "Nikon" => "Nikon Corp.", "Plustek" => "Plustek, Inc.", "Primax" => "Primax Electronics", "Siemens" => "Siemens Information and Communication Products", "Trust" => "Trust Technologies", "UMAX" => "Umax", "Vobis/Highscreen" => "Vobis", }; # Read templates for configuration file lines my %configlines; my $backend; foreach my $line (cat_("$scannerDBdir/scannerconfigs")) { chomp $line; if ($line =~ /^\s*SERVER\s+(\S+)\s*$/) { $backend = $1; } elsif ($backend) { push @{$configlines{$backend}}, $line; } } foreach my $f (glob_("$sanesrcdir/doc/descriptions/*.desc"), glob_("$sanesrcdir/doc/descriptions-external/*.desc")) { my $F = common::openFileMaybeCompressed($f); $to_add .= "\n# from $f"; my ($lineno, $cmd, $val) = 0; my ($name, $intf, $comment, $mfg, $backend); my $fs = { backend => sub { $backend = $val }, mfg => sub { $mfg = $val; $name = undef },#bug when a new mfg comes. should called $fs->{ $name }(); but ?? model => sub { unless ($name) { $name = $val; return } $name = member($mfg, keys %$sane2DB) ? ref($sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{ $mfg }|$name" : "$mfg|$name"; if (0 && member($name, keys %$scanner::scannerDB)) { print "#[$name] already in ScannerDB!\n"; } else { # SANE bug: "snapscan" calls itself "SnapScan" $backend =~ s/SnapScan/snapscan/g; $to_add .= "\nNAME $name\nSERVER $backend\nDRIVER $intf\n"; # Go through the configuration lines of # this backend and add what is needed for the # interfaces of this scanner foreach my $line (@{$configlines{$backend}}) { my $i = $1 if $line =~ /^\s*(\S*?)LINE/; if (!$i || $intf =~ /$i/i) { $to_add .= "$line\n"; } } if ($backend =~ /(unsupported|mustek_pp|gphoto2)/i) { $to_add .= "UNSUPPORTED\n"; } $to_add .= "COMMENT $comment\n" if $comment; $comment = undef; } $name = $val; }, interface => sub { $intf = $val }, comment => sub { $comment = $val }, }; local $_; while (<$F>) { $lineno++; s/\s+$//; /^;/ and next; ($cmd, $val) = /:(\S+)\s*\"([^;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next; my $f = $fs->{$cmd}; $f ? $f->() : log::l("unknown line $lineno ($_)"); } $fs->{model}(); # the last one } $to_add .= "\nEND\n"; append_to_file("ScannerDB", $to_add); } 1; #