# translation of DrakX.po to furlan
# Copyright (C) 2004 Free Software Foundation, Inc.
# Andrea Gracco <graccoandrea@tin.it>, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2004-10-07 21:57+0200\n"
"PO-Revision-Date: 2004-06-28 17:41+0200\n"
"Last-Translator: Andrea Gracco <graccoandrea@tin.it>\n"
"Language-Team: furlan <gft@freelists.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3\n"
#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Cuâle sorte di vôs vuelistu zontâ?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key isn't writable"
msgstr "No rivi a scrivi le clâf"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Torne a provâ"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Continue cence clâf USB"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1353
#, c-format
msgid "Reboot"
msgstr "Torne a inviâ"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:483
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "O ai bisugne di une clâf par salvâ i toi dâts"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Cîr ancjemò le clâf USB"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "O imposti le clâf USB"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Par plasè spiete, o imposti i file di configurazion dal sisteme te clâf "
"USB..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Insede les tôs informazions di utent, le password e vignarâ doprade par il "
"screensaver"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Configurazion automatiche"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Par plasè spiete, o cîr e o configuri les periferichis..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:223
#: diskdrake/interactive.pm:236 diskdrake/interactive.pm:377
#: diskdrake/interactive.pm:392 diskdrake/interactive.pm:515
#: diskdrake/interactive.pm:520 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:167
#: install_steps.pm:82 install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:995 network/netconnect.pm:999
#: network/netconnect.pm:1004 network/netconnect.pm:1045
#: network/netconnect.pm:1049 network/netconnect.pm:1187
#: network/netconnect.pm:1192 network/netconnect.pm:1210
#: network/netconnect.pm:1393 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:1182
#: printer/printerdrake.pm:1229 printer/printerdrake.pm:1266
#: printer/printerdrake.pm:1310 printer/printerdrake.pm:1314
#: printer/printerdrake.pm:1328 printer/printerdrake.pm:1418
#: printer/printerdrake.pm:1498 printer/printerdrake.pm:1502
#: printer/printerdrake.pm:1506 printer/printerdrake.pm:1555
#: printer/printerdrake.pm:1612 printer/printerdrake.pm:1616
#: printer/printerdrake.pm:1630 printer/printerdrake.pm:1740
#: printer/printerdrake.pm:1744 printer/printerdrake.pm:1781
#: printer/printerdrake.pm:1846 printer/printerdrake.pm:1864
#: printer/printerdrake.pm:1873 printer/printerdrake.pm:1882
#: printer/printerdrake.pm:1893 printer/printerdrake.pm:1955
#: printer/printerdrake.pm:2408 printer/printerdrake.pm:2672
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3192 printer/printerdrake.pm:3196
#: printer/printerdrake.pm:3606 printer/printerdrake.pm:3846
#: printer/printerdrake.pm:3866 printer/printerdrake.pm:3942
#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4123
#: standalone/drakTermServ:379 standalone/drakTermServ:731
#: standalone/drakTermServ:738 standalone/drakTermServ:933
#: standalone/drakTermServ:1403 standalone/drakTermServ:1408
#: standalone/drakTermServ:1415 standalone/drakTermServ:1426
#: standalone/drakTermServ:1447 standalone/drakauth:37
#: standalone/drakbackup:512 standalone/drakbackup:626
#: standalone/drakbackup:1128 standalone/drakbackup:1161
#: standalone/drakbackup:1665 standalone/drakbackup:1821
#: standalone/drakbackup:2416 standalone/drakbackup:4105
#: standalone/drakbackup:4325 standalone/drakbug:235 standalone/drakbug:254
#: standalone/drakbug:260 standalone/drakclock:125 standalone/drakconnect:648
#: standalone/drakconnect:651 standalone/drakconnect:670
#: standalone/drakfloppy:297 standalone/drakfloppy:301
#: standalone/drakfloppy:307 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:259 standalone/drakfont:604 standalone/draksplash:21
#: standalone/draksplash:501 standalone/drakxtv:107 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:196 standalone/scannerdrake:255
#: standalone/scannerdrake:684 standalone/scannerdrake:695
#: standalone/scannerdrake:834 standalone/scannerdrake:845
#: standalone/scannerdrake:915 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Fal"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Al è intravignût un fal, ma no sai ben cemût gjestîlu.\n"
"Continue a to azard."
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "Al è intravignût un fal"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Rimôf i file di configurazion dal sisteme"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Torne dome a inviâ"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Ferme chiscj programs"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1015
#: diskdrake/interactive.pm:1068
#, c-format
msgid "Read carefully!"
msgstr "Lei cun atenzion!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB o di plui"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "Server X"
#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "Sielç un server X"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr ""
#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
#: Xconfig/card.pm:255
#, c-format
msgid "Can't install Xorg package: %s"
msgstr "No rivi a instalâ il pachet Xorg: %s"
#: Xconfig/card.pm:265
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Sielç le dimension de memorie de to schede video"
#: Xconfig/card.pm:352
#, c-format
msgid "Xorg configuration"
msgstr "Configurazion Xorg"
#: Xconfig/card.pm:354
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Cuâl configurazion di Xorg vuelistu vê?"
#: Xconfig/card.pm:387
#, c-format
msgid "Configure all heads independently"
msgstr ""
#: Xconfig/card.pm:388
#, c-format
msgid "Use Xinerama extension"
msgstr "Dopre estension Xinerama"
#: Xconfig/card.pm:393
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Configure dome le schede \"%s\"%s"
#: Xconfig/card.pm:405 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:412 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s cun acelerazion 3D hardware"
#: Xconfig/card.pm:414
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Le to schede e po vê il sopuart pe acelerazion 3D cun Xorg %s."
#: Xconfig/card.pm:420
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s cun acelerazion 3D hardware sperimentâl"
#: Xconfig/card.pm:422
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Le to schede e po vê il sopuart pe acelerazion 3D hardware cun Xorg %s,\n"
"NOTE CHE CHEST AL E' UN SOPUART SPERIMENTÂL E PO FERMÂ IL TO COMPUTER."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:912
#, c-format
msgid "Custom"
msgstr "Personalizât"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:88 printer/printerdrake.pm:712
#: printer/printerdrake.pm:3937 printer/printerdrake.pm:4382
#: standalone/draksplash:120 standalone/harddrake2:265 standalone/logdrake:174
#: standalone/net_applet:160 standalone/scannerdrake:446
#, c-format
msgid "Quit"
msgstr "Jessî"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Schede Grafiche"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Visôr"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:222
#, c-format
msgid "Resolution"
msgstr "Risoluzion"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Prove"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:418
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:494 standalone/drakfont:556 standalone/harddrake2:262
#, c-format
msgid "Options"
msgstr "Opzions"
#: Xconfig/main.pm:167
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:184
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Mantignî i cambiaments?\n"
"Le configurazion in vore e je:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr ""
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Sielç un visôr"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr ""
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Gjeneric"
#: Xconfig/monitor.pm:119 standalone/drakconnect:567 standalone/harddrake2:49
#: standalone/harddrake2:83
#, c-format
msgid "Vendor"
msgstr ""
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
#: Xconfig/monitor.pm:134
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
#: Xconfig/monitor.pm:141
#, c-format
msgid "Horizontal refresh rate"
msgstr ""
#: Xconfig/monitor.pm:142
#, c-format
msgid "Vertical refresh rate"
msgstr ""
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 colôrs (8 bit)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mîl colôrs (15 bit)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mîl colôrs (16 bit)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 milions di colôrs (24 bit)"
#: Xconfig/resolution_and_depth.pm:135
#, c-format
msgid "Resolutions"
msgstr "Risoluzions"
#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Sielç le risoluzion e le fondece di colôr"
#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "Schedis video: %s"
#: Xconfig/resolution_and_depth.pm:284 interactive.pm:403
#: interactive/gtk.pm:766 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:201 standalone/drakTermServ:474
#: standalone/drakbackup:3962 standalone/drakbackup:4022
#: standalone/drakbackup:4066 standalone/drakconnect:165
#: standalone/drakconnect:850 standalone/drakconnect:937
#: standalone/drakconnect:1036 standalone/drakfont:577 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:345 ugtk2.pm:417 ugtk2.pm:515
#: ugtk2.pm:1122 ugtk2.pm:1145
#, c-format
msgid "Ok"
msgstr "Va ben"
#: Xconfig/resolution_and_depth.pm:284 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:412
#: install_steps_interactive.pm:840 interactive.pm:404 interactive/gtk.pm:770
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3266
#: standalone/drakautoinst:217 standalone/drakbackup:3888
#: standalone/drakbackup:3892 standalone/drakbackup:3950
#: standalone/drakconnect:164 standalone/drakconnect:935
#: standalone/drakconnect:1035 standalone/drakfont:667 standalone/drakfont:744
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:344
#: ugtk2.pm:411 ugtk2.pm:513 ugtk2.pm:522 ugtk2.pm:1122
#, c-format
msgid "Cancel"
msgstr "Scancele"
#: Xconfig/resolution_and_depth.pm:284 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:239 install_steps_gtk.pm:644 interactive.pm:498
#: interactive/gtk.pm:628 interactive/gtk.pm:630 standalone/drakTermServ:280
#: standalone/drakbackup:3884 standalone/drakbug:128
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:512 standalone/drakperm:134 standalone/draksec:337
#: standalone/draksec:339 standalone/draksec:357 standalone/draksec:359
#: standalone/harddrake2:261 ugtk2.pm:1235 ugtk2.pm:1236
#, c-format
msgid "Help"
msgstr "Jutori"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Prove de configurazion"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Vuelistu provâ le configurazion?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Avertence: le prove di cheste schede grafiche e podares blocâ il to computer"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Al è intravignût un fal:\n"
"%s\n"
"Prove a cambiâ cualchi parametri"
#: Xconfig/test.pm:133
#, c-format
msgid "Leaving in %d seconds"
msgstr ""
#: Xconfig/test.pm:133
#, c-format
msgid "Is this the correct setting?"
msgstr "Ise cheste le impostazion juste?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr ""
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Sorte di surie: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Periferiche de surie: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Visôr: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr ""
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr ""
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Schedis grafichis: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Memorie de schede video: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Fondece di colôr: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Risoluzion: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Driver Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Interface grafiche dal inviament"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr ""
#: any.pm:116 harddrake/sound.pm:170 interactive.pm:441 standalone/drakbug:227
#: standalone/drakconnect:167 standalone/drakconnect:611 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:211
#: standalone/service_harddrake:199
#, c-format
msgid "Please wait"
msgstr "Par plasè, spiete"
#: any.pm:116
#, c-format
msgid "Bootloader installation in progress"
msgstr ""
#: any.pm:127
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:138
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
#: any.pm:144
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
#: any.pm:181
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
#: any.pm:204 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prin setôr dal disc (MBR)"
#: any.pm:205
#, c-format
msgid "First sector of the root partition"
msgstr "Prin setôr de partizion lidrie"
#: any.pm:207
#, c-format
msgid "On Floppy"
msgstr "Su dischet"
#: any.pm:209 help.pm:739 printer/printerdrake.pm:3603
#, c-format
msgid "Skip"
msgstr "Salte"
#: any.pm:213
#, c-format
msgid "LILO/grub Installation"
msgstr "Instalazion LILO/grub"
#: any.pm:214
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr ""
#: any.pm:239 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "Configurazion dal stîl di inviament"
#: any.pm:241 any.pm:275
#, c-format
msgid "Bootloader main options"
msgstr ""
#: any.pm:245
#, c-format
msgid "Give the ram size in MB"
msgstr "Insede le dimension de ram in MB"
#: any.pm:247
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
#: any.pm:248 any.pm:586 install_steps_interactive.pm:1215
#, c-format
msgid "The passwords do not match"
msgstr "Le password no corispuint"
#: any.pm:248 any.pm:586 diskdrake/interactive.pm:1261
#: install_steps_interactive.pm:1215
#, c-format
msgid "Please try again"
msgstr "Par plasè torne a provâ"
#: any.pm:253 any.pm:278
#, c-format
msgid "Bootloader to use"
msgstr ""
#: any.pm:255 any.pm:280
#, c-format
msgid "Boot device"
msgstr "Dispositîf di inviament"
#: any.pm:257
#, c-format
msgid "Delay before booting default image"
msgstr "Ritart prin di inviâ le imagjin predefinide"
#: any.pm:258
#, c-format
msgid "Enable ACPI"
msgstr "Abilite ACPI"
#: any.pm:260
#, c-format
msgid "Force no APIC"
msgstr ""
#: any.pm:262
#, c-format
msgid "Force No Local APIC"
msgstr ""
#: any.pm:264 any.pm:613 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1220 network/netconnect.pm:595
#: printer/printerdrake.pm:1489 printer/printerdrake.pm:1609
#: standalone/drakbackup:1647 standalone/drakbackup:3490
#: standalone/drakups:295
#, c-format
msgid "Password"
msgstr "Password"
#: any.pm:265 any.pm:614 install_steps_interactive.pm:1221
#, c-format
msgid "Password (again)"
msgstr "Password (ancjemò)"
#: any.pm:266
#, c-format
msgid "Restrict command line options"
msgstr ""
#: any.pm:266
#, c-format
msgid "restrict"
msgstr ""
#: any.pm:268
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Nete /tmp a ducj i inviaments"
#: any.pm:269
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Dimension RAM juste se domandât (cjatâts %d MB)"
#: any.pm:279
#, c-format
msgid "Init Message"
msgstr ""
#: any.pm:281
#, c-format
msgid "Open Firmware Delay"
msgstr ""
#: any.pm:282
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""
#: any.pm:283
#, c-format
msgid "Enable CD Boot?"
msgstr "Abilite l'inviament di CD?"
#: any.pm:284
#, c-format
msgid "Enable OF Boot?"
msgstr ""
#: any.pm:285
#, c-format
msgid "Default OS?"
msgstr "Sisteme Operatîf predefinît?"
#: any.pm:338
#, c-format
msgid "Image"
msgstr "Imagjin"
#: any.pm:339 any.pm:349
#, c-format
msgid "Root"
msgstr "Lidrie"
#: any.pm:340 any.pm:362
#, c-format
msgid "Append"
msgstr "Append"
#: any.pm:342 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "Modalitât video"
#: any.pm:344
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:345
#, fuzzy, c-format
msgid "Network profile"
msgstr "Gnûf profîl..."
#: any.pm:354 any.pm:359 any.pm:361
#, c-format
msgid "Label"
msgstr "Etichete"
#: any.pm:356 any.pm:366 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Predefinît"
#: any.pm:363
#, c-format
msgid "Initrd-size"
msgstr "Dimension Initrd"
#: any.pm:365
#, c-format
msgid "NoVideo"
msgstr "NoVideo"
#: any.pm:376
#, c-format
msgid "Empty label not allowed"
msgstr "Etichete vueide no permitude"
#: any.pm:377
#, c-format
msgid "You must specify a kernel image"
msgstr "Tu âs di specificâ une imagjin kernel"
#: any.pm:377
#, c-format
msgid "You must specify a root partition"
msgstr "Tu âs di specificâ une partizion lidrie"
#: any.pm:378
#, c-format
msgid "This label is already used"
msgstr "Le etichete e je dizà in vore"
#: any.pm:392
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Cuâle sorte di vôs vuelistu zontâ?"
#: any.pm:393
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:393
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Altri sisteme operatîf (SunOS...)"
#: any.pm:394
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Altri sisteme operatîf (MacOS...)"
#: any.pm:394
#, fuzzy, c-format
msgid "Other OS (Windows...)"
msgstr "Altri sisteme operatîf (windows...)"
#: any.pm:422
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
#: any.pm:572
#, c-format
msgid "access to X programs"
msgstr "acès ai programs X"
#: any.pm:573
#, c-format
msgid "access to rpm tools"
msgstr "acès ai imprescj rpm"
#: any.pm:574
#, c-format
msgid "allow \"su\""
msgstr "permèt \"su\""
#: any.pm:575
#, c-format
msgid "access to administrative files"
msgstr "acès ai file di aministrazion"
#: any.pm:576
#, c-format
msgid "access to network tools"
msgstr "acès ai imprescj di rêt"
#: any.pm:577
#, c-format
msgid "access to compilation tools"
msgstr "acès ai imprescj di compilazion"
#: any.pm:582
#, c-format
msgid "(already added %s)"
msgstr "(dizà zontât %s)"
#: any.pm:587
#, c-format
msgid "This password is too simple"
msgstr "Le password e je masse sempliç"
#: any.pm:588
#, c-format
msgid "Please give a user name"
msgstr "Par plasè, insede un non utent"
#: any.pm:589
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Il non utent al à di vê dome letaris minusculis, numars , `-' e `_'"
#: any.pm:590
#, c-format
msgid "The user name is too long"
msgstr "Il non utent al è masse lunc"
#: any.pm:591
#, c-format
msgid "This user name has already been added"
msgstr "Il non utent al è stât dizà zontât"
#: any.pm:595
#, c-format
msgid "Add user"
msgstr "Zonte utent"
#: any.pm:596
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Insede un utent\n"
"%s"
#: any.pm:599 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:191
#: printer/printerdrake.pm:376 printer/printerdrake.pm:4382
#: standalone/drakbackup:2703 standalone/scannerdrake:637
#: standalone/scannerdrake:787
#, c-format
msgid "Done"
msgstr "Fat"
#: any.pm:600 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Acete utent"
#: any.pm:611
#, c-format
msgid "Real name"
msgstr "Non reâl"
#: any.pm:612 standalone/drakbackup:1642
#, c-format
msgid "Login name"
msgstr ""
#: any.pm:615
#, c-format
msgid "Shell"
msgstr "Shell"
#: any.pm:617
#, c-format
msgid "Icon"
msgstr "Icone"
#: any.pm:664 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Acès automatic"
#: any.pm:665
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "O pues impostâ il to computer par fâ acedi automatichementri un utent."
#: any.pm:666 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Vuelistu doprâ cheste fature?"
#: any.pm:667
#, c-format
msgid "Choose the default user:"
msgstr "Sielç un utent predefinît:"
#: any.pm:668
#, c-format
msgid "Choose the window manager to run:"
msgstr "Sielç il gjestôr grafic di doprâ:"
#: any.pm:680
#, c-format
msgid "Please choose a language to use."
msgstr "Par plasè sielç une lenghe di doprâ."
#: any.pm:681
#, fuzzy, c-format
msgid "Language choice"
msgstr "Lenghis"
#: any.pm:707
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
#: any.pm:725 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Dopre Unicode sicu predefinît"
#: any.pm:726 help.pm:647
#, c-format
msgid "All languages"
msgstr "Dutis les lenghis"
#: any.pm:765 help.pm:566 help.pm:855 install_steps_interactive.pm:960
#, c-format
msgid "Country / Region"
msgstr "Nazion / Regjon"
#: any.pm:766
#, c-format
msgid "Please choose your country."
msgstr "Par plasè sielç le to nazion."
#: any.pm:768
#, c-format
msgid "Here is the full list of available countries"
msgstr "Cheste e je le liste complete di dutis les nazions disponibilis"
#: any.pm:769
#, fuzzy, c-format
msgid "Other Countries"
msgstr "Un altri"
#: any.pm:777
#, c-format
msgid "Input method:"
msgstr ""
#: any.pm:778 install_any.pm:420 printer/printerdrake.pm:99
#, c-format
msgid "None"
msgstr "Nissun"
#: any.pm:912
#, c-format
msgid "No sharing"
msgstr "Nissune condivision"
#: any.pm:912
#, c-format
msgid "Allow all users"
msgstr "Permet ducj i utents"
#: any.pm:916
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
#: any.pm:928
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
#: any.pm:931
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
#: any.pm:939
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
#: any.pm:964
#, c-format
msgid "Launch userdrake"
msgstr "Invie userdrake"
#: any.pm:964 printer/printerdrake.pm:3478 printer/printerdrake.pm:3481
#: printer/printerdrake.pm:3482 printer/printerdrake.pm:3483
#: printer/printerdrake.pm:4676 standalone/drakTermServ:289
#: standalone/drakbackup:4084 standalone/drakbug:151 standalone/drakfont:500
#: standalone/drakfont:594 standalone/net_monitor:123
#: standalone/printerdrake:559
#, c-format
msgid "Close"
msgstr "Siere"
#: any.pm:966
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:16
#, fuzzy, c-format
msgid "Local file"
msgstr "File locâi"
#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:19 authentication.pm:127
#, c-format
msgid "Windows Domain"
msgstr "Domini Windows"
#: authentication.pm:20
#, c-format
msgid "Active Directory with SFU"
msgstr ""
#: authentication.pm:21
#, c-format
msgid "Active Directory with Winbind"
msgstr ""
#: authentication.pm:30
#, fuzzy, c-format
msgid "Local file:"
msgstr "File locâi:"
#: authentication.pm:30
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:31
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:31
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:32
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:32
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:33
#, c-format
msgid "Windows Domain:"
msgstr "Domini Windows:"
#: authentication.pm:33
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:34
#, c-format
msgid "Active Directory with SFU:"
msgstr ""
#: authentication.pm:34 authentication.pm:35
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
#: authentication.pm:35
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""
#: authentication.pm:60
#, c-format
msgid "Authentication LDAP"
msgstr "Autenticazion LDAP"
#: authentication.pm:61
#, c-format
msgid "LDAP Base dn"
msgstr ""
#: authentication.pm:62 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "Server LDAP"
#: authentication.pm:75 fsedit.pm:21
#, c-format
msgid "simple"
msgstr ""
#: authentication.pm:76
#, c-format
msgid "TLS"
msgstr ""
#: authentication.pm:77
#, c-format
msgid "SSL"
msgstr ""
#: authentication.pm:78
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:85 authentication.pm:123
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "Autenticazion LDAP"
#: authentication.pm:86 authentication.pm:125 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domini"
#: authentication.pm:88 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:135 share/compssUsers.pl:81
#, c-format
msgid "Server"
msgstr "Server"
#: authentication.pm:89
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "Non utent"
#: authentication.pm:90
#, c-format
msgid "Use Anonymous BIND "
msgstr ""
#: authentication.pm:91
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:92
#, fuzzy, c-format
msgid "Password for user"
msgstr "Password"
#: authentication.pm:93
#, fuzzy, c-format
msgid "Encryption"
msgstr "Clâf di cifradure"
#: authentication.pm:104
#, c-format
msgid "Authentication NIS"
msgstr "Autenticazion NIS"
#: authentication.pm:105
#, c-format
msgid "NIS Domain"
msgstr "Domini NIS"
#: authentication.pm:106
#, c-format
msgid "NIS Server"
msgstr "Server NIS"
#: authentication.pm:111
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
#: authentication.pm:123
#, c-format
msgid "Authentication Windows Domain"
msgstr ""
#: authentication.pm:128
#, c-format
msgid "Domain Admin User Name"
msgstr ""
#: authentication.pm:129
#, c-format
msgid "Domain Admin Password"
msgstr ""
#: authentication.pm:130
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""
#: authentication.pm:131
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Predefinît"
#: authentication.pm:231
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr ""
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:673
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
#: bootloader.pm:787
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO cun menu grafic"
#: bootloader.pm:788
#, c-format
msgid "LILO with text menu"
msgstr "LILO cun menu di test"
#: bootloader.pm:789
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:790
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:852
#, c-format
msgid "not enough room in /boot"
msgstr "no son a vonde stanziis in /boot"
#: bootloader.pm:1266
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr ""
#: bootloader.pm:1311
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
#: bootloader.pm:1326
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1327
#, c-format
msgid "Re-install Boot Loader"
msgstr ""
#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d minûts"
#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 minût"
#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d seconts"
#: common.pm:197
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr ""
#: common.pm:204
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr ""
#: common.pm:269
#, c-format
msgid "kdesu missing"
msgstr "al mancje kdesu"
#: common.pm:272
#, c-format
msgid "consolehelper missing"
msgstr "al mancje consolehelper"
#: crypto.pm:14 crypto.pm:28 lang.pm:254 network/adsl_consts.pm:309
#: network/adsl_consts.pm:320 network/adsl_consts.pm:330
#: network/adsl_consts.pm:340 network/adsl_consts.pm:350
#: network/adsl_consts.pm:361 network/adsl_consts.pm:372
#: network/adsl_consts.pm:382 network/adsl_consts.pm:392
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "France"
#: crypto.pm:15 lang.pm:229
#, c-format
msgid "Costa Rica"
msgstr "Costa Rica"
#: crypto.pm:16 crypto.pm:29 lang.pm:201 network/adsl_consts.pm:59
#: network/adsl_consts.pm:66 network/adsl_consts.pm:77
#: network/adsl_consts.pm:85 network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "Belgjiche"
#: crypto.pm:17 crypto.pm:30 lang.pm:235
#, c-format
msgid "Czech Republic"
msgstr "Republiche Ceche"
#: crypto.pm:18 crypto.pm:31 lang.pm:236 network/adsl_consts.pm:410
#: network/adsl_consts.pm:418
#, c-format
msgid "Germany"
msgstr "Gjermanie"
#: crypto.pm:19 crypto.pm:32 lang.pm:267 network/adsl_consts.pm:428
#, c-format
msgid "Greece"
msgstr "Grecie"
#: crypto.pm:20 crypto.pm:33 lang.pm:340
#, c-format
msgid "Norway"
msgstr "Norvegje"
#: crypto.pm:21 crypto.pm:34 lang.pm:369 network/adsl_consts.pm:561
#, c-format
msgid "Sweden"
msgstr "Svezie"
#: crypto.pm:22 crypto.pm:36 lang.pm:339 network/adsl_consts.pm:495
#: network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "Olande"
#: crypto.pm:23 crypto.pm:37 lang.pm:287 network/adsl_consts.pm:452
#: network/adsl_consts.pm:462 network/adsl_consts.pm:469
#: network/netconnect.pm:49 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italie"
#: crypto.pm:24 crypto.pm:38 lang.pm:194 network/adsl_consts.pm:36
#: network/adsl_consts.pm:44 network/adsl_consts.pm:52
#, c-format
msgid "Austria"
msgstr "Austrie"
#: crypto.pm:35 crypto.pm:65 lang.pm:403 network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "Stâts Unîts"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Gnûf"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:425 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Dismonte"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:422 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Monte"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:416
#: diskdrake/interactive.pm:627 diskdrake/interactive.pm:646
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Pont di mount"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Par plasè insede il recapit dal server WebDAV"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:479
#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1232
#, c-format
msgid "Mount point: "
msgstr "Pont di mount: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1239
#, c-format
msgid "Options: %s"
msgstr "Opzions: %s"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr ""
#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Assistent"
#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "Sielç une azion"
#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "Par plasè frache su une partizion"
#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:474
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr ""
#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr ""
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Journalised FS"
msgstr "Journalized FS"
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Swap"
msgstr "Swap"
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:325
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:326 install_steps_gtk.pm:298 mouse.pm:168
#: services.pm:164 standalone/drakbackup:1603 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Altri"
#: diskdrake/hd_gtk.pm:326 diskdrake/interactive.pm:1172
#, c-format
msgid "Empty"
msgstr "Vueit"
#: diskdrake/hd_gtk.pm:330
#, c-format
msgid "Filesystem types:"
msgstr "Sorte di filesystem:"
#: diskdrake/hd_gtk.pm:347 diskdrake/hd_gtk.pm:349 diskdrake/hd_gtk.pm:352
#, c-format
msgid "Use ``%s'' instead"
msgstr "Dopre ``%s''invezit"
#: diskdrake/hd_gtk.pm:347 diskdrake/hd_gtk.pm:352
#: diskdrake/interactive.pm:417 diskdrake/interactive.pm:580
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:101
#, c-format
msgid "Type"
msgstr "Sorte"
#: diskdrake/hd_gtk.pm:347 diskdrake/interactive.pm:441
#, c-format
msgid "Create"
msgstr "Cree"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:349 diskdrake/interactive.pm:426
#: standalone/drakperm:124 standalone/printerdrake:242
#, c-format
msgid "Delete"
msgstr "Scancele"
#: diskdrake/hd_gtk.pm:352
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Dopre ``Unmount'' prin"
#: diskdrake/interactive.pm:187
#, c-format
msgid "Choose another partition"
msgstr "Sielç une partizion diferente"
#: diskdrake/interactive.pm:187
#, c-format
msgid "Choose a partition"
msgstr "Sielç une partizion"
#: diskdrake/interactive.pm:216
#, c-format
msgid "Exit"
msgstr "Jessì"
#: diskdrake/interactive.pm:249 help.pm:530
#, c-format
msgid "Undo"
msgstr ""
#: diskdrake/interactive.pm:249
#, c-format
msgid "Toggle to normal mode"
msgstr ""
#: diskdrake/interactive.pm:249
#, c-format
msgid "Toggle to expert mode"
msgstr ""
#: diskdrake/interactive.pm:268
#, c-format
msgid "Continue anyway?"
msgstr "Continue distès?"
#: diskdrake/interactive.pm:273
#, c-format
msgid "Quit without saving"
msgstr "Jessî cence salvâ"
#: diskdrake/interactive.pm:273
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Jessî cence scrivi te tabele des partizions?"
#: diskdrake/interactive.pm:278
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Vuelistu salvâ les modifichis a /etc/fstab"
#: diskdrake/interactive.pm:285 install_steps_interactive.pm:313
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Tu âs di tornâ a inviâ par che les modifichis a le tabele des partizions e "
"ledin in vore"
#: diskdrake/interactive.pm:298 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Scancele dut"
#: diskdrake/interactive.pm:299 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr ""
#: diskdrake/interactive.pm:300 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:124
#, c-format
msgid "More"
msgstr "Di plui"
#: diskdrake/interactive.pm:305
#, c-format
msgid "Hard drive information"
msgstr ""
#: diskdrake/interactive.pm:337
#, c-format
msgid "All primary partitions are used"
msgstr "Dutis les partizions primariis e son in vore"
#: diskdrake/interactive.pm:338
#, c-format
msgid "I can't add any more partitions"
msgstr "No rivi a zontâ altris partizions"
#: diskdrake/interactive.pm:339
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Par vê plui partizions, par plasè scancele une par podê creâ une partizion "
"extended"
#: diskdrake/interactive.pm:350 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Salve le tabele des partizions"
#: diskdrake/interactive.pm:351 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Torne a meti in vore le tabele des partizions"
#: diskdrake/interactive.pm:352 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Recupere le tabele des partizions"
#: diskdrake/interactive.pm:354 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Torne a cjariâ le tabele des partizions"
#: diskdrake/interactive.pm:356
#, c-format
msgid "Removable media automounting"
msgstr ""
#: diskdrake/interactive.pm:365 diskdrake/interactive.pm:385
#, c-format
msgid "Select file"
msgstr "Sielç il file"
#: diskdrake/interactive.pm:372
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
#: diskdrake/interactive.pm:386 harddrake/sound.pm:246 keyboard.pm:351
#: lang.pm:1046 network/netconnect.pm:470 printer/printerdrake.pm:1037
#: printer/printerdrake.pm:2009 printer/printerdrake.pm:2075
#: printer/printerdrake.pm:2110 printer/printerdrake.pm:2414
#: printer/printerdrake.pm:3330 printer/printerdrake.pm:3611
#: printer/printerdrake.pm:3733 printer/printerdrake.pm:4823
#: standalone/drakTermServ:315 standalone/drakTermServ:1045
#: standalone/drakTermServ:1101 standalone/drakTermServ:1769
#: standalone/drakbackup:511 standalone/drakbackup:610 standalone/drakboot:165
#: standalone/drakclock:225 standalone/drakconnect:972
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/scannerdrake:51
#: standalone/scannerdrake:909
#, c-format
msgid "Warning"
msgstr "Avertence"
#: diskdrake/interactive.pm:387
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Insede un dischet tal letôr\n"
"Ducj i dâts tal dischet e vignaran pierdûts"
#: diskdrake/interactive.pm:398
#, c-format
msgid "Trying to rescue partition table"
msgstr "O cîr di recuperâ le tabele des partizions"
#: diskdrake/interactive.pm:404
#, c-format
msgid "Detailed information"
msgstr "Informazions minudis"
#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:717
#, c-format
msgid "Resize"
msgstr "Mude dimension"
#: diskdrake/interactive.pm:420 diskdrake/interactive.pm:783
#, c-format
msgid "Move"
msgstr "Môf"
#: diskdrake/interactive.pm:421
#, c-format
msgid "Format"
msgstr "Formât"
#: diskdrake/interactive.pm:423
#, c-format
msgid "Add to RAID"
msgstr "Zonte a RAID"
#: diskdrake/interactive.pm:424
#, c-format
msgid "Add to LVM"
msgstr "Zonte a LVM"
#: diskdrake/interactive.pm:427
#, c-format
msgid "Remove from RAID"
msgstr "Rimôf di RAID"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Remove from LVM"
msgstr "Rimôf di LVM"
#: diskdrake/interactive.pm:429
#, c-format
msgid "Modify RAID"
msgstr "Mude RAID"
#: diskdrake/interactive.pm:430
#, c-format
msgid "Use for loopback"
msgstr "Dopre par loopback"
#: diskdrake/interactive.pm:472
#, c-format
msgid "Create a new partition"
msgstr "Cree une gnove partizion"
#: diskdrake/interactive.pm:475
#, c-format
msgid "Start sector: "
msgstr ""
#: diskdrake/interactive.pm:477 diskdrake/interactive.pm:884
#, c-format
msgid "Size in MB: "
msgstr "Dimension in MB: "
#: diskdrake/interactive.pm:478 diskdrake/interactive.pm:885
#, c-format
msgid "Filesystem type: "
msgstr "Sorte di filesystem: "
#: diskdrake/interactive.pm:483
#, c-format
msgid "Preference: "
msgstr "Preference: "
#: diskdrake/interactive.pm:486
#, c-format
msgid "Logical volume name "
msgstr "Non dal volum logjic "
#: diskdrake/interactive.pm:515
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
#: diskdrake/interactive.pm:545
#, c-format
msgid "Remove the loopback file?"
msgstr "Rimôf il file di loopback?"
#: diskdrake/interactive.pm:564
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Dopo vê cambiât le sorte di partizion %s, ducj i dâts di cheste partizion e "
"vignaran pierdûts"
#: diskdrake/interactive.pm:576
#, c-format
msgid "Change partition type"
msgstr "Cambie le sorte di partizion"
#: diskdrake/interactive.pm:577 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Cuâl filesystem vuelistu?"
#: diskdrake/interactive.pm:585
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "O cambii di ext2 a ext3"
#: diskdrake/interactive.pm:614
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Dulà vuelistu montâ il file di loopback %s?"
#: diskdrake/interactive.pm:615
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Dulà vuelistu montâ il dispositîf %s?"
#: diskdrake/interactive.pm:620
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
#: diskdrake/interactive.pm:645
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Dulà vuelistu montâ %s?"
#: diskdrake/interactive.pm:669 diskdrake/interactive.pm:748
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "O cambii le dimension"
#: diskdrake/interactive.pm:669
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr ""
#: diskdrake/interactive.pm:705
#, c-format
msgid "This partition is not resizeable"
msgstr "No rivi a cambiâ le dimension di cheste dimension"
#: diskdrake/interactive.pm:710
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
#: diskdrake/interactive.pm:712
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Dopo vê cambiât le dimension %s, ducj i dâts de partizion e vignaran pierdûts"
#: diskdrake/interactive.pm:717
#, c-format
msgid "Choose the new size"
msgstr "Sielç le gnove dimension"
#: diskdrake/interactive.pm:718
#, c-format
msgid "New size in MB: "
msgstr "Gnove dimension in MB: "
#: diskdrake/interactive.pm:761 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
#: diskdrake/interactive.pm:784
#, c-format
msgid "Which disk do you want to move it to?"
msgstr ""
#: diskdrake/interactive.pm:785
#, c-format
msgid "Sector"
msgstr "Setôr"
#: diskdrake/interactive.pm:786
#, c-format
msgid "Which sector do you want to move it to?"
msgstr ""
#: diskdrake/interactive.pm:789
#, c-format
msgid "Moving"
msgstr "O môf"
#: diskdrake/interactive.pm:789
#, c-format
msgid "Moving partition..."
msgstr "O môf le partizion..."
#: diskdrake/interactive.pm:810
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Sielç un RAID esistin par zontâ"
#: diskdrake/interactive.pm:812 diskdrake/interactive.pm:828
#, c-format
msgid "new"
msgstr "gnûf"
#: diskdrake/interactive.pm:826
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Sielç un LVM esistint dulà zontâ"
#: diskdrake/interactive.pm:832
#, c-format
msgid "LVM name?"
msgstr "Non LVM?"
#: diskdrake/interactive.pm:869
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Cheste partizion no po sedi doprade par loopback"
#: diskdrake/interactive.pm:882
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:883
#, c-format
msgid "Loopback file name: "
msgstr "Non dal file di loopback: "
#: diskdrake/interactive.pm:888
#, c-format
msgid "Give a file name"
msgstr ""
#: diskdrake/interactive.pm:891
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""
#: diskdrake/interactive.pm:892
#, c-format
msgid "File already exists. Use it?"
msgstr ""
#: diskdrake/interactive.pm:915
#, c-format
msgid "Mount options"
msgstr ""
#: diskdrake/interactive.pm:922
#, c-format
msgid "Various"
msgstr ""
#: diskdrake/interactive.pm:987
#, c-format
msgid "device"
msgstr ""
#: diskdrake/interactive.pm:988
#, c-format
msgid "level"
msgstr ""
#: diskdrake/interactive.pm:989
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "Gnove dimension in MB: "
#: diskdrake/interactive.pm:1006
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr ""
#: diskdrake/interactive.pm:1021
#, c-format
msgid "What type of partitioning?"
msgstr ""
#: diskdrake/interactive.pm:1059
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
#: diskdrake/interactive.pm:1068
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr ""
#: diskdrake/interactive.pm:1081
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
#: diskdrake/interactive.pm:1101
#, c-format
msgid "Move files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1101
#, c-format
msgid "Hide files"
msgstr ""
#: diskdrake/interactive.pm:1102
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
#: diskdrake/interactive.pm:1113
#, c-format
msgid "Moving files to the new partition"
msgstr ""
#: diskdrake/interactive.pm:1117
#, c-format
msgid "Copying %s"
msgstr ""
#: diskdrake/interactive.pm:1121
#, c-format
msgid "Removing %s"
msgstr ""
#: diskdrake/interactive.pm:1135
#, c-format
msgid "partition %s is now known as %s"
msgstr ""
#: diskdrake/interactive.pm:1156 diskdrake/interactive.pm:1217
#, c-format
msgid "Device: "
msgstr "Periferiche: "
#: diskdrake/interactive.pm:1157
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "Periferiche: "
#: diskdrake/interactive.pm:1158
#, c-format
msgid "Volume label: "
msgstr ""
#: diskdrake/interactive.pm:1159
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr ""
#: diskdrake/interactive.pm:1163 diskdrake/interactive.pm:1170
#: diskdrake/interactive.pm:1235
#, c-format
msgid "Type: "
msgstr "Sorte: "
#: diskdrake/interactive.pm:1167 install_steps_gtk.pm:310
#, c-format
msgid "Name: "
msgstr "Non: "
#: diskdrake/interactive.pm:1174
#, c-format
msgid "Start: sector %s\n"
msgstr ""
#: diskdrake/interactive.pm:1175
#, c-format
msgid "Size: %s"
msgstr "Dimension: %s"
#: diskdrake/interactive.pm:1177
#, c-format
msgid ", %s sectors"
msgstr ", %s setôrs"
#: diskdrake/interactive.pm:1179
#, c-format
msgid "Cylinder %d to %d\n"
msgstr ""
#: diskdrake/interactive.pm:1180
#, c-format
msgid "Number of logical extents: %d"
msgstr ""
#: diskdrake/interactive.pm:1181
#, c-format
msgid "Formatted\n"
msgstr "Formatât\n"
#: diskdrake/interactive.pm:1182
#, c-format
msgid "Not formatted\n"
msgstr "No formatât\n"
#: diskdrake/interactive.pm:1183
#, c-format
msgid "Mounted\n"
msgstr "Montât\n"
#: diskdrake/interactive.pm:1184
#, fuzzy, c-format
msgid "RAID %s\n"
msgstr "Discs RAID %s\n"
#: diskdrake/interactive.pm:1186
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"File di loopback:\n"
" %s\n"
#: diskdrake/interactive.pm:1187
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Partizion inviade sicu predefinît\n"
" (par inviament MS-DOS, no par lilo)\n"
#: diskdrake/interactive.pm:1189
#, c-format
msgid "Level %s\n"
msgstr "Nivel %s\n"
#: diskdrake/interactive.pm:1190
#, c-format
msgid "Chunk size %d KiB\n"
msgstr ""
#: diskdrake/interactive.pm:1191
#, c-format
msgid "RAID-disks %s\n"
msgstr "Discs RAID %s\n"
#: diskdrake/interactive.pm:1193
#, c-format
msgid "Loopback file name: %s"
msgstr "Non dal file di loopback: %s"
#: diskdrake/interactive.pm:1196
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
#: diskdrake/interactive.pm:1199
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
#: diskdrake/interactive.pm:1218
#, c-format
msgid "Read-only"
msgstr "Dome letûre"
#: diskdrake/interactive.pm:1219
#, c-format
msgid "Size: %s\n"
msgstr "Dimension: %s\n"
#: diskdrake/interactive.pm:1220
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr ""
#: diskdrake/interactive.pm:1221
#, c-format
msgid "Info: "
msgstr "Informazions: "
#: diskdrake/interactive.pm:1222
#, c-format
msgid "LVM-disks %s\n"
msgstr "Discs LVM %s\n"
#: diskdrake/interactive.pm:1223
#, c-format
msgid "Partition table type: %s\n"
msgstr "Sorte di tabele des partizions: %s\n"
#: diskdrake/interactive.pm:1224
#, c-format
msgid "on channel %d id %d\n"
msgstr "sul canâl %d id %d\n"
#: diskdrake/interactive.pm:1256
#, c-format
msgid "Filesystem encryption key"
msgstr "Clâf di cifradure dal filesystem"
#: diskdrake/interactive.pm:1257
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Sielç le to clâf di cifradure"
#: diskdrake/interactive.pm:1260
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Cheste clâf di cifradure e je masse sempliç (e a di sedi lungje almancul %d "
"letaris)"
#: diskdrake/interactive.pm:1261
#, c-format
msgid "The encryption keys do not match"
msgstr "Les clâfs di cifradure no corispuindin"
#: diskdrake/interactive.pm:1264 network/netconnect.pm:1040
#: standalone/drakconnect:395
#, c-format
msgid "Encryption key"
msgstr "Clâf di cifradure"
#: diskdrake/interactive.pm:1265
#, c-format
msgid "Encryption key (again)"
msgstr "Clâf di cifradure (ancjemò)"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "No rivi a jentrâ doprant il non utent %s (password no valevule?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Autenticazion di domini domandade"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Cuâl non utent"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Un altri"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Par plasè insede il to non utent, password e non di domini par jentrâ in "
"chest host."
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "Non utent"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Cîr server"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Cîr gnûfs server"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Il pachet %s al à di sedi instalât. Vuelistu instalâlu?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""
#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "O instali i pachets..."
#: do_pkgs.pm:216
#, c-format
msgid "Removing packages..."
msgstr "O rimôf i pachets..."
#: fs.pm:445 fs.pm:494
#, c-format
msgid "Mounting partition %s"
msgstr ""
#: fs.pm:446 fs.pm:495
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""
#: fs.pm:466 fs.pm:473
#, c-format
msgid "Checking %s"
msgstr ""
#: fs.pm:511 partition_table.pm:387
#, c-format
msgid "error unmounting %s: %s"
msgstr ""
#: fs.pm:543
#, c-format
msgid "Enabling swap partition %s"
msgstr ""
#: fs/format.pm:39 fs/format.pm:46
#, c-format
msgid "Formatting partition %s"
msgstr ""
#: fs/format.pm:43
#, c-format
msgid "Creating and formatting file %s"
msgstr ""
#: fs/format.pm:78
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr ""
#: fs/format.pm:80
#, c-format
msgid "%s formatting of %s failed"
msgstr ""
#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr ""
#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr ""
#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""
#: fs/type.pm:364
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr ""
#: fs/type.pm:365
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr ""
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr ""
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr ""
#: fsedit.pm:168
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
#: fsedit.pm:385
#, c-format
msgid "Mount points must begin with a leading /"
msgstr ""
#: fsedit.pm:386
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""
#: fsedit.pm:387
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr ""
#: fsedit.pm:389
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:392
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr ""
#: fsedit.pm:394
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:397
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""
#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr ""
#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
#: fsedit.pm:408
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr ""
#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr ""
#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "Nuie ce fâ"
#: fsedit.pm:569
#, c-format
msgid "Error opening %s for writing: %s"
msgstr ""
#: harddrake/data.pm:61
#, c-format
msgid "Floppy"
msgstr "Floppy"
#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:81
#, c-format
msgid "Disk"
msgstr ""
#: harddrake/data.pm:90
#, c-format
msgid "CDROM"
msgstr ""
#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr ""
#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:120 standalone/drakbackup:2045
#, c-format
msgid "Tape"
msgstr ""
#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr ""
#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr ""
#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr ""
#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr ""
#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr ""
#: harddrake/data.pm:181
#, c-format
msgid "Processors"
msgstr ""
#: harddrake/data.pm:191
#, c-format
msgid "ISDN adapters"
msgstr ""
#: harddrake/data.pm:201
#, c-format
msgid "Ethernetcard"
msgstr ""
#: harddrake/data.pm:219 network/netconnect.pm:484
#, c-format
msgid "Modem"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "ADSL adapters"
msgstr ""
#: harddrake/data.pm:243
#, c-format
msgid "AGP controllers"
msgstr ""
#: harddrake/data.pm:252
#, c-format
msgid "Bridges and system controllers"
msgstr ""
#: harddrake/data.pm:261 help.pm:186 help.pm:855
#: install_steps_interactive.pm:992 printer/printerdrake.pm:875
#, c-format
msgid "Printer"
msgstr ""
#: harddrake/data.pm:271
#, c-format
msgid "Joystick"
msgstr ""
#: harddrake/data.pm:281
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""
#: harddrake/data.pm:290
#, c-format
msgid "SATA controllers"
msgstr ""
#: harddrake/data.pm:299
#, c-format
msgid "Firewire controllers"
msgstr ""
#: harddrake/data.pm:308
#, c-format
msgid "PCMCIA controllers"
msgstr ""
#: harddrake/data.pm:321
#, c-format
msgid "SCSI controllers"
msgstr ""
#: harddrake/data.pm:330
#, c-format
msgid "USB controllers"
msgstr ""
#: harddrake/data.pm:339
#, c-format
msgid "USB ports"
msgstr ""
#: harddrake/data.pm:348
#, c-format
msgid "SMBus controllers"
msgstr ""
#: harddrake/data.pm:357
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:366 help.pm:855 install_steps_interactive.pm:120
#: install_steps_interactive.pm:952 standalone/keyboarddrake:24
#, c-format
msgid "Keyboard"
msgstr "Tastiere"
#: harddrake/data.pm:379 help.pm:855 install_steps_interactive.pm:985
#, c-format
msgid "Mouse"
msgstr "Surie"
#: harddrake/data.pm:393
#, c-format
msgid "Scanner"
msgstr ""
#: harddrake/data.pm:403 standalone/harddrake2:431
#, c-format
msgid "Unknown/Others"
msgstr ""
#: harddrake/data.pm:431
#, c-format
msgid "cpu # "
msgstr ""
#: harddrake/sound.pm:170 standalone/drakconnect:169
#: standalone/drakconnect:613
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr ""
#: harddrake/sound.pm:206
#, c-format
msgid "No alternative driver"
msgstr ""
#: harddrake/sound.pm:207
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
#: harddrake/sound.pm:213
#, c-format
msgid "Sound configuration"
msgstr ""
#: harddrake/sound.pm:215
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
#: harddrake/sound.pm:217
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
#: harddrake/sound.pm:219
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
#: harddrake/sound.pm:233 harddrake/sound.pm:318 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr ""
#: harddrake/sound.pm:238
#, c-format
msgid "Trouble shooting"
msgstr ""
#: harddrake/sound.pm:246
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:254
#, c-format
msgid "No open source driver"
msgstr ""
#: harddrake/sound.pm:255
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
#: harddrake/sound.pm:258
#, c-format
msgid "No known driver"
msgstr ""
#: harddrake/sound.pm:259
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""
#: harddrake/sound.pm:263
#, c-format
msgid "Unknown driver"
msgstr ""
#: harddrake/sound.pm:264
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
#: harddrake/sound.pm:278
#, c-format
msgid "Sound trouble shooting"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:281
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
#: harddrake/sound.pm:307
#, c-format
msgid "Let me pick any driver"
msgstr ""
#: harddrake/sound.pm:310
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:313
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr ""
#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr ""
#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr ""
#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr ""
#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr ""
#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
#: help.pm:14 install_steps_gtk.pm:567 install_steps_interactive.pm:94
#: install_steps_interactive.pm:745 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr ""
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point won't be authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system won't work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you won't affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and don't care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 printer/printerdrake.pm:1488 printer/printerdrake.pm:1608
#, c-format
msgid "User name"
msgstr "Non utent"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:247
#: interactive.pm:403 interactive/newt.pm:317 network/netconnect.pm:280
#: network/tools.pm:198 printer/printerdrake.pm:3268
#: standalone/drakTermServ:372 standalone/drakbackup:3941
#: standalone/drakbackup:4035 standalone/drakbackup:4052
#: standalone/drakbackup:4070 ugtk2.pm:515
#, c-format
msgid "Next"
msgstr "Prossim"
#: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr ""
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr ""
#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "Svilup"
#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "Ambient Grafic"
#: help.pm:146 install_steps_gtk.pm:242 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr ""
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr ""
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr ""
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr ""
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr ""
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you don't know what a particular service is supposed to do or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:722
#: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:299 ugtk2.pm:1121
#: wizards.pm:156
#, c-format
msgid "No"
msgstr "No"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:722 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:711
#: standalone/drakbackup:2503 standalone/drakgw:290 standalone/drakgw:291
#: standalone/drakgw:299 standalone/drakgw:309 standalone/draksec:55
#: standalone/harddrake2:298 ugtk2.pm:1121 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Si"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:622
#: standalone/drakbackup:2329 standalone/drakbackup:2333
#: standalone/drakbackup:2337 standalone/drakbackup:2341
#, c-format
msgid "Configure"
msgstr "Configure"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which aren't needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably don't want to start any services which you don't need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:887
#, c-format
msgid "Hardware clock set to GMT"
msgstr ""
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr ""
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you won't be able to undo this operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr ""
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr ""
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr ""
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr ""
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Rimôf Windows"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr ""
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Don't forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1363
#, c-format
msgid "Replay"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1363
#, c-format
msgid "Automated"
msgstr ""
#: help.pm:409 install_steps_interactive.pm:1366
#, c-format
msgid "Save packages selection"
msgstr ""
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you don't have to reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"won't be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:402 interactive.pm:404
#: interactive/newt.pm:316 printer/printerdrake.pm:3266
#: standalone/drakTermServ:351 standalone/drakbackup:3901
#: standalone/drakbackup:3940 standalone/drakbackup:4051
#: standalone/drakbackup:4066 ugtk2.pm:513
#, c-format
msgid "Previous"
msgstr "Precedent"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:401
#: install_steps_interactive.pm:158 standalone/drakbackup:4098
#, c-format
msgid "Install"
msgstr "Instale"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you don't know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr ""
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr ""
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country isn't in the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data won't be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard don't match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr ""
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: don't make the password too long or too complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password won't be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you don't know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:722
#, c-format
msgid "authentication"
msgstr ""
#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:722 install_steps_interactive.pm:1211
#, c-format
msgid "No password"
msgstr ""
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can't determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" won't install any boot loader. Use this option only if you\n"
"know what you're doing."
msgstr ""
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrakelinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you don't have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrakelinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""
#: help.pm:765 printer/cups.pm:115 printer/data.pm:104
#, c-format
msgid "CUPS"
msgstr ""
#: help.pm:765
#, fuzzy, c-format
msgid "Expert"
msgstr "Eseguìs"
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
#: help.pm:788 help.pm:855 install_steps_interactive.pm:1019
#: install_steps_interactive.pm:1036
#, c-format
msgid "Sound card"
msgstr ""
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"isn't in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it isn't\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that doesn't suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrakelinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrakelinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
#: help.pm:855 install_steps_interactive.pm:978 standalone/drakclock:101
#, c-format
msgid "Timezone"
msgstr ""
#: help.pm:855 install_steps_interactive.pm:1052
#, c-format
msgid "TV card"
msgstr "Schede TV"
#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr ""
#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr ""
#: help.pm:855 install_steps_interactive.pm:1070 standalone/drakbackup:2030
#, c-format
msgid "Network"
msgstr "Rêt"
#: help.pm:855 install_steps_interactive.pm:1085
#, c-format
msgid "Proxies"
msgstr ""
#: help.pm:855 install_steps_interactive.pm:1096
#, c-format
msgid "Security Level"
msgstr "Nivel di Sigurece"
#: help.pm:855 install_steps_interactive.pm:1110
#, c-format
msgid "Firewall"
msgstr "Firewall"
#: help.pm:855 install_steps_interactive.pm:1124
#, c-format
msgid "Bootloader"
msgstr ""
#: help.pm:855 install_steps_interactive.pm:1137 services.pm:195
#, c-format
msgid "Services"
msgstr "Servizis"
#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Prossim ->"
#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Precedent"
#: install2.pm:117
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr ""
#: install_any.pm:390
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
#: install_any.pm:411
#, c-format
msgid "Do you have further supplementary media?"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:414
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
#: install_any.pm:420 printer/printerdrake.pm:2652
#: printer/printerdrake.pm:2659 standalone/scannerdrake:176
#: standalone/scannerdrake:184 standalone/scannerdrake:235
#: standalone/scannerdrake:242
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"
#: install_any.pm:420
#, fuzzy, c-format
msgid "Network (http)"
msgstr "Rêt"
#: install_any.pm:420
#, fuzzy, c-format
msgid "Network (ftp)"
msgstr "Rêt"
#: install_any.pm:464 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr ""
#: install_any.pm:468
#, c-format
msgid "Insert the CD"
msgstr ""
#: install_any.pm:492
#, c-format
msgid "Insert the CD 1 again"
msgstr ""
#: install_any.pm:502 install_any.pm:506
#, c-format
msgid "URL of the mirror?"
msgstr ""
#: install_any.pm:532
#, c-format
msgid "Can't find hdlist file on this mirror"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:713
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:736
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
#: install_any.pm:1116
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr ""
#: install_any.pm:1120
#, c-format
msgid "This floppy is not FAT formatted"
msgstr ""
#: install_any.pm:1132
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""
#: install_any.pm:1160 partition_table.pm:595
#, c-format
msgid "Error reading file %s"
msgstr ""
#: install_any.pm:1361
#, c-format
msgid "%s (was %s)"
msgstr ""
#: install_any.pm:1396
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
#: install_gtk.pm:160
#, c-format
msgid "System installation"
msgstr ""
#: install_gtk.pm:163
#, c-format
msgid "System configuration"
msgstr ""
#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr ""
#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr ""
#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr ""
#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr ""
#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr ""
#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr ""
#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr ""
#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr ""
#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr ""
#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr ""
#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr ""
#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrakelinux "
"installation."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr ""
#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr ""
#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr ""
#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr ""
#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""
#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Rimôf Windows (TM)"
#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr ""
#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr ""
#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""
#: install_interactive.pm:271
#, c-format
msgid "I can't find any room for installing"
msgstr ""
#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""
#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr ""
#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr ""
#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the "
"Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandrakesoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandrakesoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandrakesoft S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandrakesoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandrakelinux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandrakesoft.\n"
"The programs developed by Mandrakesoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandrakesoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandrakesoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of "
"Mandrakesoft S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandrakesoft S.A. \n"
msgstr ""
#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer, duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of "
"Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrakelinux.com/en/101errata.php3"
msgstr ""
#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr ""
#: install_steps.pm:477
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
#: install_steps.pm:603
#, c-format
msgid "No floppy drive available"
msgstr ""
#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr ""
#: install_steps_gtk.pm:184
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
#: install_steps_gtk.pm:235 install_steps_interactive.pm:628
#, c-format
msgid "Package Group Selection"
msgstr ""
#: install_steps_gtk.pm:264 install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr ""
#: install_steps_gtk.pm:309
#, c-format
msgid "Bad package"
msgstr ""
#: install_steps_gtk.pm:311
#, c-format
msgid "Version: "
msgstr "Version: "
#: install_steps_gtk.pm:312
#, c-format
msgid "Size: "
msgstr "Dimension: "
#: install_steps_gtk.pm:312
#, c-format
msgid "%d KB\n"
msgstr ""
#: install_steps_gtk.pm:313
#, c-format
msgid "Importance: "
msgstr "Entitât: "
#: install_steps_gtk.pm:346
#, c-format
msgid "You can't select/unselect this package"
msgstr ""
#: install_steps_gtk.pm:350
#, c-format
msgid "due to missing %s"
msgstr "cause cal mancje %s"
#: install_steps_gtk.pm:351
#, c-format
msgid "due to unsatisfied %s"
msgstr "cause che %s no l'è sodisfat"
#: install_steps_gtk.pm:352
#, c-format
msgid "trying to promote %s"
msgstr "ricercje dal miôr pachet %s"
#: install_steps_gtk.pm:353
#, c-format
msgid "in order to keep %s"
msgstr "par tignî %s"
#: install_steps_gtk.pm:358
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr ""
#: install_steps_gtk.pm:361
#, c-format
msgid "The following packages are going to be installed"
msgstr ""
#: install_steps_gtk.pm:362
#, c-format
msgid "The following packages are going to be removed"
msgstr ""
#: install_steps_gtk.pm:386
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr ""
#: install_steps_gtk.pm:388
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr ""
#: install_steps_gtk.pm:391
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
#: install_steps_gtk.pm:394
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr ""
#: install_steps_gtk.pm:399
#, c-format
msgid "Show automatically selected packages"
msgstr ""
#: install_steps_gtk.pm:404
#, c-format
msgid "Load/Save on floppy"
msgstr ""
#: install_steps_gtk.pm:405
#, c-format
msgid "Updating package selection"
msgstr ""
#: install_steps_gtk.pm:410
#, c-format
msgid "Minimal install"
msgstr ""
#: install_steps_gtk.pm:424 install_steps_interactive.pm:481
#, c-format
msgid "Choose the packages you want to install"
msgstr ""
#: install_steps_gtk.pm:440 install_steps_interactive.pm:720
#, c-format
msgid "Installing"
msgstr ""
#: install_steps_gtk.pm:447
#, c-format
msgid "Estimating"
msgstr ""
#: install_steps_gtk.pm:453
#, c-format
msgid "Time remaining "
msgstr ""
#: install_steps_gtk.pm:464
#, c-format
msgid "Please wait, preparing installation..."
msgstr ""
#: install_steps_gtk.pm:474
#, c-format
msgid "No details"
msgstr ""
#: install_steps_gtk.pm:527
#, c-format
msgid "%d packages"
msgstr ""
#: install_steps_gtk.pm:532
#, c-format
msgid "Installing package %s"
msgstr ""
#: install_steps_gtk.pm:567 install_steps_interactive.pm:94
#: install_steps_interactive.pm:745
#, c-format
msgid "Refuse"
msgstr ""
#: install_steps_gtk.pm:571 install_steps_interactive.pm:749
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
#: install_steps_gtk.pm:586 install_steps_interactive.pm:760
#, c-format
msgid "There was an error ordering packages:"
msgstr ""
#: install_steps_gtk.pm:586 install_steps_gtk.pm:590
#: install_steps_interactive.pm:760 install_steps_interactive.pm:764
#, c-format
msgid "Go on anyway?"
msgstr ""
#: install_steps_gtk.pm:590 install_steps_interactive.pm:764
#, c-format
msgid "There was an error installing packages:"
msgstr ""
#: install_steps_gtk.pm:632 install_steps_interactive.pm:934
#: install_steps_interactive.pm:1086
#, c-format
msgid "not configured"
msgstr ""
#: install_steps_interactive.pm:86
#, c-format
msgid "Do you want to recover your system?"
msgstr ""
#: install_steps_interactive.pm:87
#, c-format
msgid "License agreement"
msgstr ""
#: install_steps_interactive.pm:91
#, fuzzy, c-format
msgid "Release Notes"
msgstr "Par plasè sielç"
#: install_steps_interactive.pm:121
#, c-format
msgid "Please choose your keyboard layout."
msgstr ""
#: install_steps_interactive.pm:123
#, c-format
msgid "Here is the full list of available keyboards"
msgstr ""
#: install_steps_interactive.pm:153
#, c-format
msgid "Install/Upgrade"
msgstr ""
#: install_steps_interactive.pm:154
#, c-format
msgid "Is this an install or an upgrade?"
msgstr ""
#: install_steps_interactive.pm:160
#, c-format
msgid "Upgrade %s"
msgstr ""
#: install_steps_interactive.pm:170
#, c-format
msgid "Encryption key for %s"
msgstr ""
#: install_steps_interactive.pm:187
#, c-format
msgid "Please choose your type of mouse."
msgstr ""
#: install_steps_interactive.pm:196 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr ""
#: install_steps_interactive.pm:197 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr ""
#: install_steps_interactive.pm:207
#, c-format
msgid "Buttons emulation"
msgstr ""
#: install_steps_interactive.pm:209
#, c-format
msgid "Button 2 Emulation"
msgstr ""
#: install_steps_interactive.pm:210
#, c-format
msgid "Button 3 Emulation"
msgstr ""
#: install_steps_interactive.pm:231
#, c-format
msgid "PCMCIA"
msgstr ""
#: install_steps_interactive.pm:231
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr ""
#: install_steps_interactive.pm:238
#, c-format
msgid "IDE"
msgstr ""
#: install_steps_interactive.pm:238
#, c-format
msgid "Configuring IDE"
msgstr ""
#: install_steps_interactive.pm:258 network/tools.pm:187
#, c-format
msgid "No partition available"
msgstr ""
#: install_steps_interactive.pm:261
#, c-format
msgid "Scanning partitions to find mount points"
msgstr ""
#: install_steps_interactive.pm:268
#, c-format
msgid "Choose the mount points"
msgstr ""
#: install_steps_interactive.pm:300
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
#: install_steps_interactive.pm:337
#, c-format
msgid "Choose the partitions you want to format"
msgstr ""
#: install_steps_interactive.pm:339
#, c-format
msgid "Check bad blocks?"
msgstr ""
#: install_steps_interactive.pm:371
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
#: install_steps_interactive.pm:374
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
#: install_steps_interactive.pm:381
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
#: install_steps_interactive.pm:382 install_steps_interactive.pm:442
#, c-format
msgid "Looking for available packages..."
msgstr ""
#: install_steps_interactive.pm:385
#, c-format
msgid "Looking at packages already installed..."
msgstr ""
#: install_steps_interactive.pm:389
#, c-format
msgid "Finding packages to upgrade..."
msgstr ""
#: install_steps_interactive.pm:405 install_steps_interactive.pm:834
#, c-format
msgid ""
"Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr ""
#: install_steps_interactive.pm:411 install_steps_interactive.pm:839
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr ""
#: install_steps_interactive.pm:451
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
#: install_steps_interactive.pm:493
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""
#: install_steps_interactive.pm:495
#, c-format
msgid "Load from floppy"
msgstr ""
#: install_steps_interactive.pm:495
#, c-format
msgid "Save on floppy"
msgstr ""
#: install_steps_interactive.pm:499
#, c-format
msgid "Package selection"
msgstr ""
#: install_steps_interactive.pm:499
#, c-format
msgid "Loading from floppy"
msgstr ""
#: install_steps_interactive.pm:504
#, c-format
msgid "Insert a floppy containing package selection"
msgstr ""
#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr ""
#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr ""
#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr ""
#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr ""
#: install_steps_interactive.pm:645 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Ducj"
#: install_steps_interactive.pm:694
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
#: install_steps_interactive.pm:699
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr ""
#: install_steps_interactive.pm:720
#, c-format
msgid "Preparing installation"
msgstr ""
#: install_steps_interactive.pm:729
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
#: install_steps_interactive.pm:778
#, c-format
msgid "Post-install configuration"
msgstr ""
#: install_steps_interactive.pm:784
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr ""
#: install_steps_interactive.pm:813
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
#: install_steps_interactive.pm:853
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
#: install_steps_interactive.pm:857
#, c-format
msgid "Unable to contact mirror %s"
msgstr ""
#: install_steps_interactive.pm:857
#, c-format
msgid "Would you like to try again?"
msgstr ""
#: install_steps_interactive.pm:883 standalone/drakclock:46
#, c-format
msgid "Which is your timezone?"
msgstr ""
#: install_steps_interactive.pm:888
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr ""
#: install_steps_interactive.pm:896
#, c-format
msgid "NTP Server"
msgstr "Server NTP"
#: install_steps_interactive.pm:938 steps.pm:30
#, c-format
msgid "Summary"
msgstr ""
#: install_steps_interactive.pm:951 install_steps_interactive.pm:959
#: install_steps_interactive.pm:977 install_steps_interactive.pm:984
#: install_steps_interactive.pm:1136 services.pm:135
#: standalone/drakbackup:1593
#, c-format
msgid "System"
msgstr "Sisteme"
#: install_steps_interactive.pm:991 install_steps_interactive.pm:1018
#: install_steps_interactive.pm:1035 install_steps_interactive.pm:1051
#: install_steps_interactive.pm:1062
#, c-format
msgid "Hardware"
msgstr "Hardware"
#: install_steps_interactive.pm:997 install_steps_interactive.pm:1006
#, c-format
msgid "Remote CUPS server"
msgstr ""
#: install_steps_interactive.pm:997
#, c-format
msgid "No printer"
msgstr ""
#: install_steps_interactive.pm:1039
#, c-format
msgid "Do you have an ISA sound card?"
msgstr ""
#: install_steps_interactive.pm:1041
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
#: install_steps_interactive.pm:1043
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
#: install_steps_interactive.pm:1063
#, c-format
msgid "Graphical interface"
msgstr ""
#: install_steps_interactive.pm:1069 install_steps_interactive.pm:1084
#, c-format
msgid "Network & Internet"
msgstr "Rêt & Internet"
#: install_steps_interactive.pm:1086
#, c-format
msgid "configured"
msgstr ""
#: install_steps_interactive.pm:1095 install_steps_interactive.pm:1109
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "Sigurece"
#: install_steps_interactive.pm:1114
#, c-format
msgid "activated"
msgstr ""
#: install_steps_interactive.pm:1114
#, c-format
msgid "disabled"
msgstr "disabilitât"
#: install_steps_interactive.pm:1123
#, c-format
msgid "Boot"
msgstr "Inviament"
#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1127
#, c-format
msgid "%s on %s"
msgstr ""
#: install_steps_interactive.pm:1141 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr ""
#: install_steps_interactive.pm:1151
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
#: install_steps_interactive.pm:1205
#, c-format
msgid "Set root password and network authentication methods"
msgstr ""
#: install_steps_interactive.pm:1206
#, c-format
msgid "Set root password"
msgstr ""
#: install_steps_interactive.pm:1217
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
#: install_steps_interactive.pm:1222 network/netconnect.pm:596
#: standalone/drakauth:25 standalone/drakauth:27 standalone/drakconnect:457
#, c-format
msgid "Authentication"
msgstr ""
#: install_steps_interactive.pm:1254
#, c-format
msgid "Preparing bootloader..."
msgstr ""
#: install_steps_interactive.pm:1264
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""
#: install_steps_interactive.pm:1270
#, c-format
msgid "Do you want to use aboot?"
msgstr ""
#: install_steps_interactive.pm:1273
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
#: install_steps_interactive.pm:1294
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
#: install_steps_interactive.pm:1322 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr ""
#: install_steps_interactive.pm:1327
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr ""
#: install_steps_interactive.pm:1329
#, c-format
msgid "Creating auto install floppy..."
msgstr ""
#: install_steps_interactive.pm:1341
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
#: install_steps_interactive.pm:1356
#, c-format
msgid "Generate auto install floppy"
msgstr ""
#: install_steps_interactive.pm:1358
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr ""
#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
msgstr ""
#: interactive.pm:170
#, c-format
msgid "Choose a file"
msgstr ""
#: interactive.pm:295 interactive/gtk.pm:482 standalone/drakbackup:1534
#: standalone/drakfont:592 standalone/drakfont:659 standalone/drakups:297
#: standalone/drakups:357 standalone/drakups:377 standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Add"
msgstr "Zonte"
#: interactive.pm:295 interactive/gtk.pm:482
#, c-format
msgid "Modify"
msgstr "Mude"
#: interactive.pm:295 interactive/gtk.pm:482 standalone/drakups:299
#: standalone/drakups:359 standalone/drakups:379 standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Remove"
msgstr "Rimôf"
#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr ""
#: interactive.pm:403 interactive/newt.pm:317 ugtk2.pm:515
#, c-format
msgid "Finish"
msgstr "Finìs"
#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr ""
#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr ""
#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr ""
#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr ""
#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr ""
#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr ""
#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr ""
#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr ""
#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr ""
#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr ""
#: keyboard.pm:163 keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr ""
#: keyboard.pm:164 keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr ""
#: keyboard.pm:165
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr ""
#: keyboard.pm:166 keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr ""
#: keyboard.pm:167 keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr ""
#: keyboard.pm:168 keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr ""
#: keyboard.pm:169 keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr ""
#: keyboard.pm:170
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr ""
#: keyboard.pm:171 keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr ""
#: keyboard.pm:173 keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr ""
#: keyboard.pm:174 keyboard.pm:287
#, c-format
msgid "UK keyboard"
msgstr ""
#: keyboard.pm:175 keyboard.pm:288
#, c-format
msgid "US keyboard"
msgstr ""
#: keyboard.pm:177
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr ""
#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr ""
#: keyboard.pm:179
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr ""
#: keyboard.pm:180
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr ""
#: keyboard.pm:181
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "Arap"
#: keyboard.pm:182
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr ""
#: keyboard.pm:183
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr ""
#: keyboard.pm:184
#, c-format
msgid ""
"_: keyboard\n"
"Bengali"
msgstr ""
#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr ""
#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr ""
#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr ""
#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr ""
#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr ""
#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr ""
#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr ""
#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr ""
#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr ""
#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""
#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr ""
#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr ""
#: keyboard.pm:201
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr ""
#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr ""
#: keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr ""
#: keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr ""
#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr ""
#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr ""
#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr ""
#: keyboard.pm:212
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr ""
#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr ""
#: keyboard.pm:214
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr ""
#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr ""
#: keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr ""
#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr ""
#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr ""
#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr ""
#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr ""
#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr ""
#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr ""
#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr ""
#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr ""
#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr ""
#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr ""
#: keyboard.pm:234
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Tastiere"
#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr ""
#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr ""
#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr ""
#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr ""
#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr ""
#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr ""
#: keyboard.pm:246
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr ""
#: keyboard.pm:247
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr ""
#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr ""
#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr ""
#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr ""
#: keyboard.pm:251
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr ""
#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr ""
#: keyboard.pm:253
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr ""
#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr ""
#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr ""
#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr ""
#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr ""
#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr ""
#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr ""
#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr ""
#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr ""
#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr ""
#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""
#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr ""
#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr ""
#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr ""
#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr ""
#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr ""
#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr ""
#: keyboard.pm:276
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr ""
#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr ""
#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr ""
#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Thai"
msgstr ""
#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr ""
#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr ""
#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr ""
#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr ""
#: keyboard.pm:289
#, c-format
msgid "US keyboard (international)"
msgstr ""
#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr ""
#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr ""
#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr ""
#: keyboard.pm:300
#, c-format
msgid "Right Alt key"
msgstr ""
#: keyboard.pm:301
#, c-format
msgid "Both Shift keys simultaneously"
msgstr ""
#: keyboard.pm:302
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr ""
#: keyboard.pm:303
#, c-format
msgid "CapsLock key"
msgstr ""
#: keyboard.pm:304
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr ""
#: keyboard.pm:305
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr ""
#: keyboard.pm:306
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr ""
#: keyboard.pm:307
#, c-format
msgid "\"Menu\" key"
msgstr ""
#: keyboard.pm:308
#, c-format
msgid "Left \"Windows\" key"
msgstr ""
#: keyboard.pm:309
#, c-format
msgid "Right \"Windows\" key"
msgstr ""
#: keyboard.pm:310
#, c-format
msgid "Both Control keys simultaneously"
msgstr ""
#: keyboard.pm:311
#, c-format
msgid "Both Alt keys simultaneously"
msgstr ""
#: keyboard.pm:312
#, c-format
msgid "Left Shift key"
msgstr ""
#: keyboard.pm:313
#, c-format
msgid "Right Shift key"
msgstr ""
#: keyboard.pm:314
#, c-format
msgid "Left Alt key"
msgstr ""
#: keyboard.pm:315
#, c-format
msgid "Left Control key"
msgstr ""
#: keyboard.pm:316
#, c-format
msgid "Right Control key"
msgstr ""
#: keyboard.pm:347
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
#: keyboard.pm:352
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:165
#, c-format
msgid "default:LTR"
msgstr "default:LTR"
#: lang.pm:182
#, c-format
msgid "Andorra"
msgstr ""
#: lang.pm:183
#, c-format
msgid "United Arab Emirates"
msgstr "Emirâts Araps Unîts"
#: lang.pm:184
#, c-format
msgid "Afghanistan"
msgstr ""
#: lang.pm:185
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua e Barbuda"
#: lang.pm:186
#, c-format
msgid "Anguilla"
msgstr "Anguila"
#: lang.pm:187
#, c-format
msgid "Albania"
msgstr "Albanie"
#: lang.pm:188
#, c-format
msgid "Armenia"
msgstr "Armenie"
#: lang.pm:189
#, c-format
msgid "Netherlands Antilles"
msgstr "Antilis Olandêsis"
#: lang.pm:190
#, c-format
msgid "Angola"
msgstr "Angola"
#: lang.pm:191
#, c-format
msgid "Antarctica"
msgstr "Antartide"
#: lang.pm:192 network/adsl_consts.pm:28 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Argjentine"
#: lang.pm:193
#, c-format
msgid "American Samoa"
msgstr "Samoa Americane"
#: lang.pm:195 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Australie"
#: lang.pm:196
#, c-format
msgid "Aruba"
msgstr "Aruba"
#: lang.pm:197
#, c-format
msgid "Azerbaijan"
msgstr ""
#: lang.pm:198
#, c-format
msgid "Bosnia and Herzegovina"
msgstr ""
#: lang.pm:199
#, c-format
msgid "Barbados"
msgstr "Barbados"
#: lang.pm:200
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"
#: lang.pm:202
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"
#: lang.pm:203 network/adsl_consts.pm:126 network/adsl_consts.pm:134
#, c-format
msgid "Bulgaria"
msgstr "Bulgarie"
#: lang.pm:204
#, c-format
msgid "Bahrain"
msgstr "Bahrain"
#: lang.pm:205
#, c-format
msgid "Burundi"
msgstr "Burundi"
#: lang.pm:206
#, c-format
msgid "Benin"
msgstr "Benin"
#: lang.pm:207
#, c-format
msgid "Bermuda"
msgstr "Bermuda"
#: lang.pm:208
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"
#: lang.pm:209
#, c-format
msgid "Bolivia"
msgstr "Bolivie"
#: lang.pm:210 network/adsl_consts.pm:92 network/adsl_consts.pm:102
#: network/adsl_consts.pm:110 network/adsl_consts.pm:118
#, c-format
msgid "Brazil"
msgstr "Brasîl"
#: lang.pm:211
#, c-format
msgid "Bahamas"
msgstr "Bahamas"
#: lang.pm:212
#, c-format
msgid "Bhutan"
msgstr "Bhutan"
#: lang.pm:213
#, c-format
msgid "Bouvet Island"
msgstr "Isule di Bouvet"
#: lang.pm:214
#, c-format
msgid "Botswana"
msgstr "Botswana"
#: lang.pm:215
#, c-format
msgid "Belarus"
msgstr "Bielorussie"
#: lang.pm:216
#, c-format
msgid "Belize"
msgstr "Belize"
#: lang.pm:217
#, c-format
msgid "Canada"
msgstr "Canadà"
#: lang.pm:218
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Isulis Cocos (Keeling)"
#: lang.pm:219
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Congo (Kinshasa)"
#: lang.pm:220
#, c-format
msgid "Central African Republic"
msgstr "Republiche Centrâl Africane"
#: lang.pm:221
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Congo (Brazzaville)"
#: lang.pm:222 network/adsl_consts.pm:568 network/adsl_consts.pm:575
#, c-format
msgid "Switzerland"
msgstr "Svuizare"
#: lang.pm:223
#, c-format
msgid "Cote d'Ivoire"
msgstr ""
#: lang.pm:224
#, c-format
msgid "Cook Islands"
msgstr "Isulis Cook"
#: lang.pm:225
#, c-format
msgid "Chile"
msgstr "Cile"
#: lang.pm:226
#, c-format
msgid "Cameroon"
msgstr "Camerun"
#: lang.pm:227 network/adsl_consts.pm:142 network/adsl_consts.pm:150
#: network/adsl_consts.pm:158 network/adsl_consts.pm:166
#: network/adsl_consts.pm:174 network/adsl_consts.pm:182
#: network/adsl_consts.pm:190 network/adsl_consts.pm:198
#: network/adsl_consts.pm:206 network/adsl_consts.pm:214
#: network/adsl_consts.pm:222 network/adsl_consts.pm:230
#: network/adsl_consts.pm:238 network/adsl_consts.pm:246
#: network/adsl_consts.pm:254 network/adsl_consts.pm:262
#: network/adsl_consts.pm:270 network/adsl_consts.pm:278
#: network/adsl_consts.pm:286 network/adsl_consts.pm:294
#, c-format
msgid "China"
msgstr "Cine"
#: lang.pm:228
#, c-format
msgid "Colombia"
msgstr "Colombie"
#: lang.pm:230
#, c-format
msgid "Serbia & Montenegro"
msgstr "Serbie Montenegro"
#: lang.pm:231
#, c-format
msgid "Cuba"
msgstr "Cuba"
#: lang.pm:232
#, c-format
msgid "Cape Verde"
msgstr "Cap Vert"
#: lang.pm:233
#, c-format
msgid "Christmas Island"
msgstr "Isulis di Christmas"
#: lang.pm:234
#, c-format
msgid "Cyprus"
msgstr "Cipri"
#: lang.pm:237
#, c-format
msgid "Djibouti"
msgstr "Zibuti"
#: lang.pm:238 network/adsl_consts.pm:302
#, c-format
msgid "Denmark"
msgstr "Danimarcje"
#: lang.pm:239
#, c-format
msgid "Dominica"
msgstr "Dominica"
#: lang.pm:240
#, c-format
msgid "Dominican Republic"
msgstr "Republiche Dominicane"
#: lang.pm:241
#, c-format
msgid "Algeria"
msgstr "Alzerie"
#: lang.pm:242
#, c-format
msgid "Ecuador"
msgstr "Ecuador"
#: lang.pm:243
#, c-format
msgid "Estonia"
msgstr "Estonie"
#: lang.pm:244
#, c-format
msgid "Egypt"
msgstr "Egjit"
#: lang.pm:245
#, c-format
msgid "Western Sahara"
msgstr "Sahara Ocidentâl"
#: lang.pm:246
#, c-format
msgid "Eritrea"
msgstr "Eritree"
#: lang.pm:247 network/adsl_consts.pm:531 network/adsl_consts.pm:540
#: network/adsl_consts.pm:551
#, c-format
msgid "Spain"
msgstr "Spagne"
#: lang.pm:248
#, c-format
msgid "Ethiopia"
msgstr "Etiopie"
#: lang.pm:249 network/adsl_consts.pm:402
#, c-format
msgid "Finland"
msgstr "Finlande"
#: lang.pm:250
#, c-format
msgid "Fiji"
msgstr "Fiji"
#: lang.pm:251
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr ""
#: lang.pm:252
#, c-format
msgid "Micronesia"
msgstr "Micronesie"
#: lang.pm:253
#, c-format
msgid "Faroe Islands"
msgstr "Isulis Faroe"
#: lang.pm:255
#, c-format
msgid "Gabon"
msgstr "Gabon"
#: lang.pm:256 network/adsl_consts.pm:593 network/adsl_consts.pm:601
#: network/netconnect.pm:52
#, c-format
msgid "United Kingdom"
msgstr "Ream Unît"
#: lang.pm:257
#, c-format
msgid "Grenada"
msgstr "Grenada"
#: lang.pm:258
#, c-format
msgid "Georgia"
msgstr "Gjeorgjie"
#: lang.pm:259
#, c-format
msgid "French Guiana"
msgstr ""
#: lang.pm:260
#, c-format
msgid "Ghana"
msgstr "Ghana"
#: lang.pm:261
#, c-format
msgid "Gibraltar"
msgstr "Gjibraltar"
#: lang.pm:262
#, c-format
msgid "Greenland"
msgstr "Groenlande"
#: lang.pm:263
#, c-format
msgid "Gambia"
msgstr "Gambia"
#: lang.pm:264
#, c-format
msgid "Guinea"
msgstr "Guinee"
#: lang.pm:265
#, c-format
msgid "Guadeloupe"
msgstr ""
#: lang.pm:266
#, c-format
msgid "Equatorial Guinea"
msgstr "Guinee Ecuatoriâl"
#: lang.pm:268
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""
#: lang.pm:269
#, c-format
msgid "Guatemala"
msgstr "Guatemala"
#: lang.pm:270
#, c-format
msgid "Guam"
msgstr "Guam"
#: lang.pm:271
#, c-format
msgid "Guinea-Bissau"
msgstr "Guinee-Bissau"
#: lang.pm:272
#, c-format
msgid "Guyana"
msgstr "Guiane"
#: lang.pm:273
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "Cine (Hong Kong)"
#: lang.pm:274
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Isulis Heard e McDonald"
#: lang.pm:275
#, c-format
msgid "Honduras"
msgstr "Honduras"
#: lang.pm:276
#, c-format
msgid "Croatia"
msgstr "Cravuazie"
#: lang.pm:277
#, c-format
msgid "Haiti"
msgstr "Haiti"
#: lang.pm:278 network/adsl_consts.pm:436
#, c-format
msgid "Hungary"
msgstr "Ongjarie"
#: lang.pm:279
#, c-format
msgid "Indonesia"
msgstr "Indonesie"
#: lang.pm:280 network/adsl_consts.pm:444 standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irlande"
#: lang.pm:281
#, c-format
msgid "Israel"
msgstr "Israêl"
#: lang.pm:282
#, c-format
msgid "India"
msgstr "Indie"
#: lang.pm:283
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Teritori dal Ocean Indian Britanic"
#: lang.pm:284
#, c-format
msgid "Iraq"
msgstr "Irak"
#: lang.pm:285
#, c-format
msgid "Iran"
msgstr "Iran"
#: lang.pm:286
#, c-format
msgid "Iceland"
msgstr "Islande"
#: lang.pm:288
#, c-format
msgid "Jamaica"
msgstr "Gjamaiche"
#: lang.pm:289
#, c-format
msgid "Jordan"
msgstr "Jordanie"
#: lang.pm:290
#, c-format
msgid "Japan"
msgstr "Gjapon"
#: lang.pm:291
#, c-format
msgid "Kenya"
msgstr "Kenya"
#: lang.pm:292
#, c-format
msgid "Kyrgyzstan"
msgstr ""
#: lang.pm:293
#, c-format
msgid "Cambodia"
msgstr ""
#: lang.pm:294
#, c-format
msgid "Kiribati"
msgstr ""
#: lang.pm:295
#, c-format
msgid "Comoros"
msgstr "Comoris"
#: lang.pm:296
#, c-format
msgid "Saint Kitts and Nevis"
msgstr ""
#: lang.pm:297
#, c-format
msgid "Korea (North)"
msgstr "Coree (Nord)"
#: lang.pm:298
#, c-format
msgid "Korea"
msgstr "Coree"
#: lang.pm:299
#, c-format
msgid "Kuwait"
msgstr "Kuwait"
#: lang.pm:300
#, c-format
msgid "Cayman Islands"
msgstr "Isulis Cayman"
#: lang.pm:301
#, c-format
msgid "Kazakhstan"
msgstr "Kazakistan"
#: lang.pm:302
#, c-format
msgid "Laos"
msgstr "Laos"
#: lang.pm:303
#, c-format
msgid "Lebanon"
msgstr "Liban"
#: lang.pm:304
#, c-format
msgid "Saint Lucia"
msgstr "Sante Lucia"
#: lang.pm:305
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"
#: lang.pm:306
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"
#: lang.pm:307
#, c-format
msgid "Liberia"
msgstr "Liberie"
#: lang.pm:308
#, c-format
msgid "Lesotho"
msgstr "Lesotho"
#: lang.pm:309 network/adsl_consts.pm:479
#, c-format
msgid "Lithuania"
msgstr "Lituanie"
#: lang.pm:310
#, c-format
msgid "Luxembourg"
msgstr "Lussemburc"
#: lang.pm:311
#, c-format
msgid "Latvia"
msgstr "Letonie"
#: lang.pm:312
#, c-format
msgid "Libya"
msgstr "Libie"
#: lang.pm:313 network/adsl_consts.pm:487
#, c-format
msgid "Morocco"
msgstr "Maroc"
#: lang.pm:314
#, c-format
msgid "Monaco"
msgstr "Monaco"
#: lang.pm:315
#, c-format
msgid "Moldova"
msgstr ""
#: lang.pm:316
#, c-format
msgid "Madagascar"
msgstr "Madagascar"
#: lang.pm:317
#, c-format
msgid "Marshall Islands"
msgstr "Isulis Marshall"
#: lang.pm:318
#, c-format
msgid "Macedonia"
msgstr "Macedonie"
#: lang.pm:319
#, c-format
msgid "Mali"
msgstr "Mali"
#: lang.pm:320
#, c-format
msgid "Myanmar"
msgstr "Myanmar"
#: lang.pm:321
#, c-format
msgid "Mongolia"
msgstr "Mongolie"
#: lang.pm:322
#, c-format
msgid "Northern Mariana Islands"
msgstr "Isulis Mariannis Setentrionâlis"
#: lang.pm:323
#, c-format
msgid "Martinique"
msgstr ""
#: lang.pm:324
#, c-format
msgid "Mauritania"
msgstr "Mauritanie"
#: lang.pm:325
#, c-format
msgid "Montserrat"
msgstr "Montserrat"
#: lang.pm:326
#, c-format
msgid "Malta"
msgstr "Malte"
#: lang.pm:327
#, c-format
msgid "Mauritius"
msgstr "Maurizi"
#: lang.pm:328
#, c-format
msgid "Maldives"
msgstr "Maldivis"
|