package pkgs; # $Id$ use diagnostics; use strict; use vars qw(*LOG %preferred $limitMinTrans %compssListDesc); use common qw(:common :file :functional :system); use install_any; use commands; use run_program; use detect_devices; use log; use fs; use loopback; use c; my @preferred = qw(perl-GTK postfix proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module); @preferred{@preferred} = (); #- lower bound on the left ( aka 90 means [90-100[ ) %compssListDesc = ( 5 => __("must have"), 4 => __("important"), 3 => __("very nice"), 2 => __("nice"), 1 => __("maybe"), ); #- constant for small transaction. $limitMinTrans = 8; #- constant for package accessor (via table). my $FILE = 0; my $FLAGS = 1; my $SIZE_DEPS = 2; my $MEDIUM = 3; my $PROVIDES = 4; my $VALUES = 5; my $HEADER = 6; my $INSTALLED_CUMUL_SIZE = 7; my $EPOCH = 8; #- constant for packing flags, see below. my $PKGS_SELECTED = 0x00ffffff; my $PKGS_FORCE = 0x01000000; my $PKGS_INSTALLED = 0x02000000; my $PKGS_BASE = 0x04000000; my $PKGS_UPGRADE = 0x20000000; #- package to ignore, typically in Application CD. my %ignoreBadPkg = ( 'civctp-demo' => 1, 'eus-demo' => 1, 'myth2-demo' => 1, 'heretic2-demo' => 1, 'heroes3-demo' => 1, 'rt2-demo' => 1, ); #- basic methods for extracting informations about packages. #- to save memory, (name, version, release) are no more stored, they #- are directly generated from (file). #- all flags are grouped together into (flags), these includes the #- following flags : selected, force, installed, base, skip. #- size and deps are grouped to save memory too and make a much #- simpler and faster depslist reader, this gets (sizeDeps). sub packageHeaderFile { $_[0]->[$FILE] } sub packageName { $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1 : die "invalid file `$_[0]->[$FILE]'" } sub packageVersion { $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1 : die "invalid file `$_[0]->[$FILE]'" } sub packageRelease { $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1 : die "invalid file `$_[0]->[$FILE]'" } sub packageArch { $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1 : die "invalid file `$_[0]->[$FILE]'" } sub packageFile { $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm" : die "invalid file `$_[0]->[$FILE]'" } sub packageEpoch { $_[0]->[$EPOCH] || 0 } sub packageSize { to_int($_[0]->[$SIZE_DEPS]) } sub packageDepsId { split ' ', ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0] } sub packageFlagSelected { $_[0]->[$FLAGS] & $PKGS_SELECTED } sub packageFlagForce { $_[0]->[$FLAGS] & $PKGS_FORCE } sub packageFlagInstalled { $_[0]->[$FLAGS] & $PKGS_INSTALLED } sub packageFlagBase { $_[0]->[$FLAGS] & $PKGS_BASE } sub packageFlagUpgrade { $_[0]->[$FLAGS] & $PKGS_UPGRADE } sub packageSetFlagSelected { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; } sub packageSetFlagForce { $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE) : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); } sub packageSetFlagInstalled { $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); } sub packageSetFlagBase { $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE) : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); } sub packageSetFlagUpgrade { $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE) : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); } sub packageMedium { $_[0]->[$MEDIUM] } sub packageProvides { map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] } sub packageRate { substr($_[0]->[$VALUES], 0, 1) } sub packageRateRFlags { my ($rate, @flags) = split "\t", $_[0]->[$VALUES]; ($rate, @flags) } sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg->[$VALUES] = join("\t", $rate, @flags) } sub packageHeader { $_[0]->[$HEADER] } sub packageFreeHeader { c::headerFree(delete $_[0]->[$HEADER]) } sub packageSelectedOrInstalled { packageFlagSelected($_[0]) || packageFlagInstalled($_[0]) } sub packageId { my ($packages, $pkg) = @_; my $i = 0; foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ } return; } sub cleanHeaders { my ($prefix) = @_; commands::rm("-rf", "$prefix/tmp/headers") if -e "$prefix/tmp/headers"; } #- get all headers from an hdlist file. sub extractHeaders($$$) { my ($prefix, $pkgs, $medium) = @_; cleanHeaders($prefix); eval { require packdrake; my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1); $packer->extract_archive("$prefix/tmp/headers", map { packageHeaderFile($_) } @$pkgs); }; foreach (@$pkgs) { my $f = "$prefix/tmp/headers/". packageHeaderFile($_); local *H; open H, $f or log::l("unable to open header file $f: $!"), next; $_->[$HEADER] = c::headerRead(fileno H, 1) or log::l("unable to read header of package ". packageHeaderFile($_)); } @$pkgs = grep { $_->[$HEADER] } @$pkgs; } #- size and correction size functions for packages. #- invCorrectSize corrects size in the range 0 to 3Gb approximately, so #- it should not be used outside these levels. #- but since it is an inverted parabolic curve starting above 0, we can #- get a solution where X=Y at approximately 9.3Gb. we use this point as #- a limit to change the approximation to use a linear one. #- for information above this point, we have the corrected size below the #- original size wich is absurd, this point is named D below. my $A = -121568/100000000000; # -1.21568e-05; #- because perl does like that on some language (TO BE FIXED QUICKLY) my $B = 121561/100000; # 1.21561 my $C = -239889/10000; # -23.9889 #- doesn't take hdlist's into account as getAvailableSpace will do it. my $D = (-sqrt(sqr($B - 1) - 4 * $A * $C) - ($B - 1)) / 2 / $A; #- $A is negative so a positive solution is with - sqrt ... sub correctSize { my $csz = ($A * $_[0] + $B) * $_[0] + $C; $csz > $_[0] ? $csz : $_[0]; #- size correction (in MB) should be above input argument (as $A is negative). } sub invCorrectSize { my $sz = $_[0] < $D ? (sqrt(sqr($B) + 4 * $A * ($_[0] - $C)) - $B) / 2 / $A : $_[0]; $sz < $_[0] ? $sz : $_[0]; } sub selectedSize { my ($packages) = @_; my $size = 0; foreach (values %{$packages->{names}}) { packageFlagSelected($_) && !packageFlagInstalled($_) and $size += packageSize($_) - ($_->[$INSTALLED_CUMUL_SIZE] || 0); } $size; } sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) } #- searching and grouping methods. #- package is a reference to list that contains #- a hash to search by name and #- a list to search by id. sub packageByName { my ($packages, $name) = @_; $packages->{names}{$name} or log::l("unknown package `$name'") && undef; } sub packageById { my ($packages, $id) = @_; $packages->{depslist}[$id] or log::l("unknown package id $id") && undef; } sub packagesOfMedium { my ($packages, $mediumName) = @_; my $medium = $packages->{mediums}{$mediumName}; grep { $_->[$MEDIUM] == $medium } @{$packages->{depslist}}; } sub packagesToInstall { my ($packages) = @_; grep { $_->[$MEDIUM]{selected} && packageFlagSelected($_) && !packageFlagInstalled($_) } values %{$packages->{names}}; } sub allMediums { my ($packages) = @_; keys %{$packages->{mediums}}; } sub mediumDescr { my ($packages, $medium) = @_; $packages->{mediums}{$medium}{descr}; } #- selection, unselection of package. sub selectPackage { #($$;$$$) my ($packages, $pkg, $base, $otherOnly, $check_recursion) = @_; #- check if the same or better version is installed, #- do not select in such case. packageFlagInstalled($pkg) and return; #- check for medium selection, if the medium has not been #- selected, the package cannot be selected. $pkg->[$MEDIUM]{selected} or return; #- avoid infinite recursion (mainly against badly generated depslist.ordered). $check_recursion ||= {}; exists $check_recursion->{$pkg->[$FILE]} and return; $check_recursion->{$pkg->[$FILE]} = undef; #- make sure base package are set even if already selected. $base and packageSetFlagBase($pkg, 1); #- select package and dependancies, otherOnly may be a reference #- to a hash to indicate package that will strictly be selected #- when value is true, may be selected when value is false (this #- is only used for unselection, not selection) unless (packageFlagSelected($pkg)) { foreach (packageDepsId($pkg)) { if (/\|/) { #- choice deps should be reselected recursively as no #- closure on them is computed, this code is exactly the #- same as pixel's one. my $preferred; foreach (split '\|') { my $dep = packageById($packages, $_) or next; $preferred ||= $dep; packageFlagSelected($dep) and $preferred = $dep, last; exists $preferred{packageName($dep)} and $preferred = $dep; } $preferred or die "unable to find a package for choice"; packageFlagSelected($preferred) or log::l("selecting default package as $preferred->[$FILE]"); selectPackage($packages, $preferred, $base, $otherOnly, $check_recursion); } else { #- deps have been closed except for choices, so no need to #- recursively apply selection, expand base on it. my $dep = packageById($packages, $_); $base and packageSetFlagBase($dep, 1); $otherOnly and !packageFlagSelected($dep) and $otherOnly->{packageName($dep)} = 1; $otherOnly or packageSetFlagSelected($dep, 1+packageFlagSelected($dep)); } } } $otherOnly and !packageFlagSelected($pkg) and $otherOnly->{packageName($pkg)} = 1; $otherOnly or packageSetFlagSelected($pkg, 1+packageFlagSelected($pkg)); 1; } sub unselectPackage($$;$) { my ($packages, $pkg, $otherOnly) = @_; #- base package are not unselectable, #- and already unselected package are no more unselectable. packageFlagBase($pkg) and return; packageFlagSelected($pkg) or return; #- dependancies may be used to propose package that may be not #- usefull for the user, since their counter is just one and #- they are not used any more by other packages. #- provides are closed and are taken into account to get possible #- unselection of package (value false on otherOnly) or strict #- unselection (value true on otherOnly). foreach my $provided ($pkg, packageProvides($packages, $pkg)) { packageFlagBase($provided) and die "a provided package cannot be a base package"; if (packageFlagSelected($provided)) { my $unselect_alone = 1; foreach (packageDepsId($provided)) { $unselect_alone = 0; if (/\|/) { #- this package use a choice of other package, so we have to check #- if our package is not included in the choice, if this is the #- case, if must be checked one of the other package are selected. foreach (split '\|') { my $dep = packageById($packages, $_); $dep == $pkg and $unselect_alone |= 1 and next; packageFlagBase($dep) || packageFlagSelected($dep) and $unselect_alone |= 2; } } else { packageById($packages, $_) == $pkg and $unselect_alone = 1; } $unselect_alone == 1 and last; } #- if package has been found and nothing more selected, #- deselect the provided, or we can ignore it safely. $provided == $pkg || $unselect_alone == 1 or next; $otherOnly or packageSetFlagSelected($provided, 0); $otherOnly and $otherOnly->{packageName($provided)} = 1; } foreach (map { split '\|' } packageDepsId($provided)) { my $dep = packageById($packages, $_); packageFlagBase($dep) and next; packageFlagSelected($dep) or next; for (packageFlagSelected($dep)) { $_ == 1 and do { $otherOnly and $otherOnly->{packageName($dep)} ||= 0; }; $_ > 1 and do { $otherOnly or packageSetFlagSelected($dep, $_-1); }; last; } } } 1; } sub togglePackageSelection($$;$) { my ($packages, $pkg, $otherOnly) = @_; packageFlagSelected($pkg) ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly); } sub setPackageSelection($$$) { my ($packages, $pkg, $value) = @_; $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg); } sub unselectAllPackages($) { my ($packages) = @_; foreach (values %{$packages->{names}}) { unless (packageFlagBase($_) || packageFlagUpgrade($_)) { packageSetFlagSelected($_, 0); } } } sub unselectAllPackagesIncludingUpgradable($) { my ($packages, $removeUpgradeFlag) = @_; foreach (values %{$packages->{names}}) { unless (packageFlagBase($_)) { packageSetFlagSelected($_, 0); packageSetFlagUpgrade($_, 0); } } } sub psUpdateHdlistsDeps { my ($prefix, $method) = @_; my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found"; #- WARNING: this function should be kept in sync with functions #- psUsingHdlists and psUsingHdlist. #- it purpose it to update hdlist files on system to install. #- parse hdlist.list file. my $medium = 1; foreach (<$listf>) { chomp; s/\s*#.*$//; /^\s*$/ and next; m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file"; my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3); #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used #- for getting header of package during installation or after by urpmi. my $fakemedium = "$descr ($method$medium)"; my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"); -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; }; install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found"; symlinkf $newf, "/tmp/$hdlist"; ++$medium; } #- this is necessary for urpmi. install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_") foreach qw(depslist.ordered provides rpmsrate); } sub psUsingHdlists { my ($prefix, $method) = @_; my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found"; my %packages = ( names => {}, depslist => [], mediums => {}); #- parse hdlists file. my $medium = 1; foreach (<$listf>) { chomp; s/\s*#.*$//; /^\s*$/ and next; m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file"; #- make sure the first medium is always selected! #- by default select all image. psUsingHdlist($prefix, $method, \%packages, $1, $medium, $2, $3, 1); ++$medium; } log::l("psUsingHdlists read " . scalar keys(%{$packages{names}}) . " headers on " . scalar keys(%{$packages{mediums}}) . " hdlists"); \%packages; } sub psUsingHdlist { my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_; my $fakemedium = "$descr ($method$medium)"; log::l("trying to read $hdlist for medium $medium"); #- if the medium already exist, use it. $packages->{mediums}{$medium} and return; my $m = $packages->{mediums}{$medium} = { hdlist => $hdlist, method => $method, medium => $medium, rpmsdir => $rpmsdir, #- where is RPMS directory. descr => $descr, fakemedium => $fakemedium, min => scalar keys %{$packages->{names}}, max => -1, #- will be updated after reading current hdlist. selected => $selected, #- default value is only CD1, it is really the minimal. }; #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used #- for getting header of package during installation or after by urpmi. my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"); -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; }; install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found"; symlinkf $newf, "/tmp/$hdlist"; #- avoid using more than one medium if Cd is not ejectable. #- but keep all medium here so that urpmi has the whole set. $method eq 'cdrom' && $medium > 1 && isCdNotEjectable() and return; #- extract filename from archive, this take advantage of verifying #- the archive too. eval { require packdrake; my $packer = new packdrake($newf, quiet => 1); foreach (@{$packer->{files}}) { $packer->{data}{$_}[0] eq 'f' or next; my $pkg = [ (undef) x 8 ]; $pkg->[$FILE] = $_; $pkg->[$MEDIUM] = $m; my $specific_arch = packageArch($pkg); if (!$specific_arch || compat_arch($specific_arch)) { my $old_pkg = $packages->{names}{packageName($pkg)}; if ($old_pkg) { if (packageVersion($pkg) eq packageVersion($old_pkg) && packageRelease($pkg) eq packageRelease($old_pkg)) { if (better_arch($specific_arch, packageArch($old_pkg))) { log::l("replacing old package with package $_ with better arch: $specific_arch"); $packages->{names}{packageName($pkg)} = $pkg; } else { log::l("keeping old package against package $_ with worse arch"); } } else { log::l("ignoring package $_ already present in distribution with different version or release"); } } else { $packages->{names}{packageName($pkg)} = $pkg; } } else { log::l("ignoring package $_ with incompatible arch: $specific_arch"); } } }; #- update maximal index. $m->{max} = scalar(keys %{$packages->{names}}) - 1; $m->{max} >= $m->{min} or die "nothing found while parsing $newf"; log::l("read " . ($m->{max} - $m->{min} + 1) . " headers in $hdlist"); 1; } sub getOtherDeps($$) { my ($packages, $f) = @_; #- this version of getDeps is customized for handling errors more easily and #- convert reference by name to deps id including closure computation. local $_; while (<$f>) { my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/; my $pkg = $packages->{names}{$name}; $pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next; $version eq packageVersion($pkg) and $release eq packageRelease($pkg) or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ", packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next; my $index = scalar @{$packages->{depslist}}; $index >= $pkg->[$MEDIUM]{min} && $index <= $pkg->[$MEDIUM]{max} or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation"); #- here we have to translate referenced deps by name to id. #- this include a closure on deps too. my %closuredeps; @closuredeps{map { packageId($packages, $_), packageDepsId($_) } grep { $_ } map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } } split /\s+/, $deps} = (); $pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps; push @{$packages->{depslist}}, $pkg; } #- check for same number of package in depslist and hdlists, avoid being to hard. scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}}) or log::l("other depslist has not same package as hdlist file"); } sub getDeps { my ($prefix, $packages) = @_; #- this is necessary for urpmi. install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered"); install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides"); #- beware of heavily mismatching depslist.ordered file against hdlist files. my $mismatch = 0; #- update dependencies list, provides attributes are updated later #- cross reference to be resolved on id (think of loop requires) #- provides should be updated after base flag has been set to save #- memory. local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list"; local $_; while (<F>) { my ($name, $version, $release, $arch, $epoch, $sizeDeps) = /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/; my $pkg = $packages->{names}{$name}; #- these verification are necessary in case of error, but are no more fatal as #- in case of only one medium taken into account during install, there should be #- silent warning for package which are unknown at this point. $pkg or log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist"), next; $version eq packageVersion($pkg) or log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), next; $release eq packageRelease($pkg) or log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), next; $arch eq packageArch($pkg) or log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), next; $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial). $pkg->[$SIZE_DEPS] = $sizeDeps; #- check position of package in depslist according to precomputed #- limit by hdlist, very strict :-) #- above warning have chance to raise an exception here, but may help #- for debugging. my $i = scalar @{$packages->{depslist}}; $i >= $pkg->[$MEDIUM]{min} && $i <= $pkg->[$MEDIUM]{max} or log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1; #- package are already sorted in depslist to enable small transaction and multiple medium. push @{$packages->{depslist}}, $pkg; } #- check for mismatching package, it should break with above die unless depslist has too many errors! $mismatch and die "depslist.ordered mismatch against hdlist files"; #- check for same number of package in depslist and hdlists. scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}}) or die "depslist.ordered has not same package as hdlist files"; } sub getProvides($) { my ($packages) = @_; #- update provides according to dependencies, here are stored #- reference to package directly and choice are included, this #- assume only 1 of the choice is selected, else on unselection #- the provided package will be deleted where other package still #- need it. #- base package are not updated because they cannot be unselected, #- this save certainly a lot of memory since most of them may be #- needed by a large number of package. #- now using a packed of signed short, this means no more than 32768 #- packages can be managed by DrakX (currently about 2000). my $i = 0; foreach my $pkg (@{$packages->{depslist}}) { unless (packageFlagBase($pkg)) { foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) { my $provided = $packages->{depslist}[$_] or die "invalid package index $_"; packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i; } } ++$i; } } sub read_rpmsrate { my ($packages, $f) = @_; my $line_nb = 0; my (@l); while (<$f>) { $line_nb++; /\t/ and die "tabulations not allowed at line $line_nb\n"; s/#.*//; # comments my ($indent, $data) = /(\s*)(.*)/; next if !$data; # skip empty lines @l = grep { $_->[0] < length $indent } @l; my @m = @l ? @{$l[$#l][1]} : (); my ($t, $flag, @l2); while ($data =~ /^(( [1-5] | (?: (?: !\s*)? [0-9A-Z_]+(?:".*?")?) (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)* ) (?:\s+|$) )(.*)/x) { #@")) { ($t, $flag, $data) = ($1,$2,$3); while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {} my $ok = 0; $flag = join('||', grep { if (my ($inv, $p) = /^(!)?HW"(.*)"/) { ($inv xor detect_devices::matching_desc($p)) and $ok = 1; 0; } else { 1; } } split '\|\|', $flag); push @m, $ok ? 'TRUE' : $flag || 'FALSE'; push @l2, [ length $indent, [ @m ] ]; $indent .= $t; } if ($data) { # has packages on same line my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m); foreach (split ' ', $data) { if ($packages) { my $p = packageByName($packages, $_) or next; my @m2 = map { packageName(packageById($packages, $_)) =~ /locales-(.*)/ ? qq(LOCALES"$1") : () } packageDepsId($p); packageSetRateRFlags($p, $rate, (grep { !/^\d$/ } @m), @m2); } else { print "$_ = ", join(" && ", @m), "\n"; } } push @l, @l2; } else { push @l, [ $l2[0][0], $l2[$#l2][1] ]; } } } sub readCompssUsers { my ($meta_class) = @_; my (%compssUsers, @sorted, $l); my $file = 'Mandrake/base/compssUsers'; my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file"; local $_; while (<$f>) { /^\s*$/ || /^#/ and next; s/#.*//; if (/^(\S.*)/) { my $verbatim = $_; my ($icon, $descr, $path); /^(.*?)\s*\[path=(.*?)\](.*)/ and $_ = "$1$3", $path = $2; /^(.*?)\s*\[icon=(.*?)\](.*)/ and $_ = "$1$3", $icon = $2; /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2; $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] }; push @sorted, "$path|$_"; } elsif (/^\s+(.*?)\s*$/) { push @$l, $1; } } \%compssUsers, \@sorted; } sub saveCompssUsers { my ($prefix, $packages, $compssUsers, $sorted) = @_; my $flat; foreach (@$sorted) { my @fl = @{$compssUsers->{$_}{flags}}; my %fl; $fl{$_} = 1 foreach @fl; $flat .= $compssUsers->{$_}{verbatim}; foreach my $p (values %{$packages->{names}}) { my ($rate, @flags) = packageRateRFlags($p); if ($rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) { $flat .= sprintf "\t%d %s\n", $rate, packageName($p); } } } output "$prefix/var/lib/urpmi/compssUsers.flat", $flat; } sub setSelectedFromCompssList { my ($packages, $compssUsersChoice, $min_level, $max_size) = @_; $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set my $nb = selectedSize($packages); foreach my $p (sort { packageRate($b) <=> packageRate($a) } values %{$packages->{names}}) { my ($rate, @flags) = packageRateRFlags($p); next if !$rate || $rate < $min_level || grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags; #- determine the packages that will be selected when #- selecting $p. the packages are not selected. my %newSelection; selectPackage($packages, $p, 0, \%newSelection); #- this enable an incremental total size. my $old_nb = $nb; foreach (grep { $newSelection{$_} } keys %newSelection) { $nb += packageSize($packages->{names}{$_}); } if ($max_size && $nb > $max_size) { $nb = $old_nb; $min_level = packageRate($p); last; } #- at this point the package can safely be selected. selectPackage($packages, $p); } log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")"); log::l("setSelectedFromCompssList: ", join(" ", sort map { packageName($_) } grep { packageFlagSelected($_) } @{$packages->{depslist}})); $min_level; } #- usefull to know the size it would take for a given min_level/max_size #- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages sub saveSelected { my ($packages) = @_; my @l = values %{$packages->{names}}; my @flags = map { packageFlagSelected($_) } @l; [ $packages, \@l, \@flags ]; } sub restoreSelected { my ($packages, $l, $flags) = @{$_[0]}; mapn { packageSetFlagSelected(@_) } $l, $flags; } sub computeGroupSize { my ($packages, $min_level) = @_; sub inside { my ($l1, $l2) = @_; my $i = 0; return if @$l1 > @$l2; foreach (@$l1) { my $c; while ($c = $l2->[$i++] cmp $_ ) { return if $c == 1 || $i > @$l2; } } 1; } sub or_ify { my ($first, @other) = @_; my @l = split('\|\|', $first); foreach (@other) { @l = map { my $n = $_; map { "$_&&$n" } @l; } split('\|\|'); } #- HACK, remove LOCALES, too costly grep { !/LOCALES/ } @l; } sub or_clean { my (@l) = map { [ sort split('&&') ] } @_ or return ''; my @r; B: while (@l) { my $e = shift @l; foreach (@r, @l) { inside($e, $_) and next B; } push @r, $e; } join("\t", map { join('&&', @$_) } @r); } my (%group, %memo); foreach my $p (values %{$packages->{names}}) { my ($rate, @flags) = packageRateRFlags($p); next if !$rate || $rate < $min_level; my $flags = join("\t", @flags = or_ify(@flags)); $group{packageName($p)} = ($memo{$flags} ||= or_clean(@flags)); #- determine the packages that will be selected when selecting $p. the packages are not selected. my %newSelection; selectPackage($packages, $p, 0, \%newSelection); foreach (grep { $newSelection{$_} } keys %newSelection) { my $s = $group{$_} || do { $packages->{names}{$_}[$VALUES] =~ /\t(.*)/; join("\t", or_ify(split("\t", $1))); }; next if length($s) > 80; # HACK, truncated too complicated expressions, too costly my $m = "$flags\t$s"; $group{$_} = ($memo{$m} ||= or_clean(@flags, split("\t", $s))); } } my (%sizes, %pkgs); while (my ($k, $v) = each %group) { push @{$pkgs{$v}}, $k; $sizes{$v} += packageSize($packages->{names}{$k}); } log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes; \%sizes, \%pkgs; } sub init_db { my ($prefix) = @_; my $f = "$prefix/root/install.log"; open(LOG, "> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept."); *LOG or *LOG = log::F() or *LOG = *STDERR; CORE::select((CORE::select(LOG), $| = 1)[0]); c::rpmErrorSetCallback(fileno LOG); #- c::rpmSetVeryVerbose(); log::l("reading /usr/lib/rpm/rpmrc"); c::rpmReadConfigFiles() or die "can't read rpm config files"; log::l("\tdone"); } sub rebuild_db_open_for_traversal { my ($packages, $prefix) = @_; log::l("reading /usr/lib/rpm/rpmrc"); c::rpmReadConfigFiles() or die "can't read rpm config files"; log::l("\tdone"); unless (exists $packages->{rebuild_db}) { if (my $pid = fork()) { waitpid $pid, 0; ($? & 0xff00) and die "rebuilding of rpm database failed"; } else { log::l("rebuilding rpm database"); my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$"; -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), commands::rm("-rf", $rebuilddb_dir); c::rpmdbRebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2); c::_exit(0); } $packages->{rebuild_db} = undef; } my $db = c::rpmdbOpenForTraversal($prefix) or die "unable to open $prefix/var/lib/rpm/Packages"; log::l("opened rpm database for examining existing packages"); $db; } sub clean_old_rpm_db { my ($prefix) = @_; my $failed; foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) { -s "$prefix/var/lib/rpm/$_" or $failed = 'failed'; } #- rebuilding has been successfull, so remove old rpm database if any. #- once we have checked the rpm4 db file are present and not null, in case #- of doubt, avoid removing them... unless ($failed) { log::l("rebuilding rpm database completed successfully"); foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm providesindex.rpm requiredby.rpm triggerindex.rpm)) { -e "$prefix/var/lib/rpm/$_" or next; log::l("removing old rpm file $_"); commands::rm("-f", "$prefix/var/lib/rpm/$_"); } } } sub done_db { log::l("closing install.log file"); close LOG; } sub versionCompare($$) { my ($a, $b) = @_; local $_; while ($a || $b) { my ($sb, $sa) = map { $1 if $a =~ /^\W*\d/ ? s/^\W*0*(\d+)// : s/^\W*(\D*)// } ($b, $a); $_ = ($sa =~ /^\d/ || $sb =~ /^\d/) && length($sa) <=> length($sb) || $sa cmp $sb and return $_ || 0; $sa eq '' && $sb eq '' and return $a cmp $b || 0; } } sub selectPackagesAlreadyInstalled { my ($packages, $prefix) = @_; #- avoid rebuilding the database if such case. $packages->{rebuild_db} = "oem does not need rebuilding the rpm db"; my $db = rebuild_db_open_for_traversal($packages, $prefix); #- this method has only one objectif, check the presence of packages #- already installed and avoid installing them again. this is to be used #- with oem installation, if the database exists, preselect the packages #- installed WHATEVER their version/release (log if a problem is perceived #- is enough). c::rpmdbTraverse($db, sub { my ($header) = @_; my $p = $packages->{names}{c::headerGetEntry($header, 'name')}; if ($p) { my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p); my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'), packageVersion($p)); my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 && ($version_cmp > 0 || $version_cmp == 0 && versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0); $version_rel_test or log::l("keeping an older package, avoiding selecting $p->[$FILE]"); packageSetFlagInstalled($p, 1); } }); #- close db, job finished ! c::rpmdbClose($db); log::l("done selecting packages to upgrade"); } sub selectPackagesToUpgrade($$$;$$) { my ($packages, $prefix, $base, $toRemove, $toSave) = @_; local $_; #- else perl complains on the map { ... } grep { ... } @...; local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT; if (my $pid = fork()) { @{$toRemove || []} = (); #- reset this one. close UPGRADE_OUTPUT; while (<UPGRADE_INPUT>) { chomp; my ($action, $name) = /^([\w\d]*):(.*)/; for ($action) { /remove/ and do { push @$toRemove, $name; next }; /keepfiles/ and do { push @$toSave, $name; next }; my $p = $packages->{names}{$name} or die "unable to find package ($name)"; /^\d*$/ and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next }; /installed/ and do { packageSetFlagInstalled($p, 1); next }; /select/ and do { selectPackage($packages, $p); next }; die "unknown action ($action)"; } } close UPGRADE_INPUT; waitpid $pid, 0; } else { close UPGRADE_INPUT; my $db = rebuild_db_open_for_traversal($packages, $prefix); #- used for package that are not correctly updated. #- should only be used when nothing else can be done correctly. my %upgradeNeedRemove = ( 'libstdc++' => 1, 'compat-glibc' => 1, 'compat-libs' => 1, ); #- generel purpose for forcing upgrade of package whatever version is. my %packageNeedUpgrade = ( #'lilo' => 1, #- this package has been misnamed in 7.0. ); #- help removing package which may have different release numbering my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []}; #- help searching package to upgrade in regard to already installed files. my %installedFilesForUpgrade; #- help keeping memory by this set of package that have been obsoleted. my %obsoletedPackages; #- make a subprocess here for reading filelist, this is important #- not to waste a lot of memory for the main program which will fork #- latter for each transaction. local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD; local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT; if (my $pid = fork()) { close INPUT_CHILD; close OUTPUT_CHILD; select((select(OUTPUT), $| = 1)[0]); #- internal reading from interactive mode of parsehdlist. #- takes a code to call with the line read, this avoid allocating #- memory for that. my $ask_child = sub { my ($name, $tag, $code) = @_; $code or die "no callback code for parsehdlist output"; print OUTPUT "$name:$tag\n"; local $_; while (<INPUT>) { chomp; /^\s*$/ and last; $code->($_); } }; #- select packages which obseletes other package, obselete package are not removed, #- should we remove them ? this could be dangerous ! foreach my $p (values %{$packages->{names}}) { $ask_child->(packageName($p), "obsoletes", sub { #- take care of flags and version and release if present if ($_[0] =~ /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/ && c::rpmdbNameTraverse($db, $1) > 0) { $3 and eval(versionCompare(packageVersion($p), $3) . $2 . 0) or next; $4 and eval(versionCompare(packageRelease($p), $4) . $2 . 0) or next; log::l("selecting " . packageName($p) . " by selection on obsoletes"); $obsoletedPackages{$1} = undef; selectPackage($packages, $p); } }); } #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which #- are not in the packages list to upgrade. #- the 'installed' property will make a package unable to be selected, look at select. c::rpmdbTraverse($db, sub { my ($header) = @_; my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ && (c::headerGetEntry($header, 'name'). '-' . c::headerGetEntry($header, 'version'). '-' . c::headerGetEntry($header, 'release'))); my $p = $packages->{names}{c::headerGetEntry($header, 'name')}; if ($p) { my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p); my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'), packageVersion($p)); my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 && ($version_cmp > 0 || $version_cmp == 0 && versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0); if ($packageNeedUpgrade{packageName($p)}) { log::l("package ". packageName($p) ." need to be upgraded"); } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is ! if ($otherPackage && $version_cmp <= 0) { log::l("force upgrading $otherPackage since it will not be updated otherwise"); } else { #- let the parent known this installed package. print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n"; packageSetFlagInstalled($p, 1); } } elsif ($upgradeNeedRemove{packageName($p)}) { my $otherPackage = (c::headerGetEntry($header, 'name'). '-' . c::headerGetEntry($header, 'version'). '-' . c::headerGetEntry($header, 'release')); log::l("removing $otherPackage since it will not upgrade correctly!"); $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our. } } else { if (! exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) { my @files = c::headerGetEntry($header, 'filenames'); @installedFilesForUpgrade{grep { ($_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| && ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = (); } } }); #- find new packages to upgrade. foreach my $p (values %{$packages->{names}}) { my $skipThis = 0; my $count = c::rpmdbNameTraverse($db, packageName($p), sub { my ($header) = @_; $skipThis ||= packageFlagInstalled($p); }); #- skip if not installed (package not found in current install). $skipThis ||= ($count == 0); #- make sure to upgrade package that have to be upgraded. $packageNeedUpgrade{packageName($p)} and $skipThis = 0; #- select the package if it is already installed with a lower version or simply not installed. unless ($skipThis) { my $cumulSize; selectPackage($packages, $p); #- keep in mind installed files which are not being updated. doing this costs in #- execution time but use less memory, else hash all installed files and unhash #- all file for package marked for upgrade. c::rpmdbNameTraverse($db, packageName($p), sub { my ($header) = @_; $cumulSize += c::headerGetEntry($header, 'size'); my @files = c::headerGetEntry($header, 'filenames'); @installedFilesForUpgrade{grep { ($_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| && ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = (); }); $ask_child->(packageName($p), "files", sub { delete $installedFilesForUpgrade{$_[0]}; }); #- keep in mind the cumul size of installed package since they will be deleted #- on upgrade, only for package that are allowed to be upgraded. if (allowedToUpgrade(packageName($p))) { print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n"; } } } #- unmark all files for all packages marked for upgrade. it may not have been done above #- since some packages may have been selected by depsList. foreach my $p (values %{$packages->{names}}) { if (packageFlagSelected($p)) { $ask_child->(packageName($p), "files", sub { delete $installedFilesForUpgrade{$_[0]}; }); } } #- select packages which contains marked files, then unmark on selection. #- a special case can be made here, the selection is done only for packages #- requiring locales if the locales are selected. #- another special case are for devel packages where fixes over the time has #- made some files moving between the normal package and its devel couterpart. #- if only one file is affected, no devel package is selected. foreach my $p (values %{$packages->{names}}) { unless (packageFlagSelected($p)) { my $toSelect = 0; $ask_child->(packageName($p), "files", sub { if ($_[0] !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) { ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]"; } delete $installedFilesForUpgrade{$_[0]}; }); if ($toSelect) { if ($toSelect <= 1 && packageName($p) =~ /-devel/) { log::l("avoid selecting " . packageName($p) . " as not enough files will be updated"); } else { #- default case is assumed to allow upgrade. my @deps = map { my $p = $packages->{depslist}[$_]; $p && packageName($p) =~ /locales-/ ? ($p) : () } packageDepsId($p); if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) { log::l("selecting " . packageName($p) . " by selection on files"); selectPackage($packages, $p); } else { log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected"); } } } } } #- clean memory... %installedFilesForUpgrade = (); #- no need to still use the child as this point, we can let him to terminate. close OUTPUT; close INPUT; waitpid $pid, 0; } else { close INPUT; close OUTPUT; open STDIN, "<&INPUT_CHILD"; open STDOUT, ">&OUTPUT_CHILD"; exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}} or c::_exit(1); } #- let the parent known about what we found here! foreach my $p (values %{$packages->{names}}) { print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p); } #- clean false value on toRemove. delete $toRemove{''}; #- get filenames that should be saved for packages to remove. #- typically config files, but it may broke for packages that #- are very old when compabilty has been broken. #- but new version may saved to .rpmnew so it not so hard ! if ($toSave && keys %toRemove) { c::rpmdbTraverse($db, sub { my ($header) = @_; my $otherPackage = (c::headerGetEntry($header, 'name'). '-' . c::headerGetEntry($header, 'version'). '-' . c::headerGetEntry($header, 'release')); if ($toRemove{$otherPackage}) { print UPGRADE_OUTPUT "remove:$otherPackage\n"; if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) { delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade. } else { my @files = c::headerGetEntry($header, 'filenames'); my @flags = c::headerGetEntry($header, 'fileflags'); for my $i (0..$#flags) { if ($flags[$i] & c::RPMFILE_CONFIG()) { print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/; } } } } }); } #- close db, job finished ! c::rpmdbClose($db); log::l("done selecting packages to upgrade"); close UPGRADE_OUTPUT; c::_exit(0); } #- keep a track of packages that are been selected for being upgraded, #- these packages should not be unselected (unless expertise) foreach my $p (values %{$packages->{names}}) { packageSetFlagUpgrade($p, 1) if packageFlagSelected($p); } } sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel-secure|kernel-smp|kernel-linus|hackkernel)$/ } sub installCallback { # my $msg = shift; # log::l($msg .": ". join(',', @_)); } sub install($$$;$$) { my ($prefix, $isUpgrade, $toInstall, $depOrder, $media) = @_; my %packages; return if $::g_auto_install || !scalar(@$toInstall); #- for root loopback'ed /boot my $loop_boot = loopback::prepare_boot($prefix); #- first stage to extract some important informations #- about the packages selected. this is used to select #- one or many transaction. my ($total, $nb); foreach my $pkg (@$toInstall) { $packages{packageName($pkg)} = $pkg; $nb++; $total += packageSize($pkg); } log::l("pkgs::install $prefix"); log::l("pkgs::install the following: ", join(" ", keys %packages)); eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo"; log::l("reading /usr/lib/rpm/rpmrc"); c::rpmReadConfigFiles() or die "can't read rpm config files"; log::l("\tdone"); my $callbackOpen = sub { my $p = $packages{$_[0]}; my $f = packageFile($p); print LOG "$f $p->[$MEDIUM]{descr}\n"; my $fd = install_any::getFile($f, $p->[$MEDIUM]{descr}); $fd ? fileno $fd : -1; }; my $callbackClose = sub { packageSetFlagInstalled(delete $packages{$_[0]}, 1) }; #- do not modify/translate the message used with installCallback since #- these are keys during progressing installation, or change in other #- place (install_steps_gtk.pm,...). installCallback("Starting installation", $nb, $total); my ($i, $min, $medium) = (0, 0, 1); do { my @transToInstall; if (!$depOrder || !$media) { @transToInstall = values %packages; $nb = 0; } else { do { #- change current media if needed. if ($i > $media->{$medium}{max}) { #- search for media that contains the desired package to install. foreach (keys %$media) { $i >= $media->{$_}{min} && $i <= $media->{$_}{max} and $medium = $_, last; } } $i >= $media->{$medium}{min} && $i <= $media->{$medium}{max} or die "unable to find right medium"; install_any::useMedium($medium); while ($i <= $media->{$medium}{max} && ($i < $min || scalar @transToInstall < $limitMinTrans)) { my $dep = $packages{packageName($depOrder->[$i++])} or next; if ($dep->[$MEDIUM]{selected}) { push @transToInstall, $dep; foreach (map { split '\|' } packageDepsId($dep)) { $min < $_ and $min = $_; } } else { log::l("ignoring package $dep->[$FILE] as its medium is not selected"); } --$nb; #- make sure the package is not taken into account as its medium is not selected. } } while ($nb > 0 && scalar(@transToInstall) == 0); #- avoid null transaction, it a nop that cost a bit. } #- added to exit typically after last media unselected. if ($nb == 0 && scalar(@transToInstall) == 0) { cleanHeaders($prefix); loopback::save_boot($loop_boot); return; } #- extract headers for parent as they are used by callback. extractHeaders($prefix, \@transToInstall, $media->{$medium}); if ($media->{$medium}{method} eq 'cdrom') { #- reset file descriptor open for main process but #- make sure error trying to change from hdlist are #- trown from main process too. install_any::getFile(packageFile($transToInstall[0]), $transToInstall[0][$MEDIUM]{descr}); } #- and make sure there are no staling open file descriptor too (before forking)! install_any::getFile('XXX'); my ($retry_package, $retry_count); while ($retry_package || @transToInstall) { local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT; if (my $pid = fork()) { close OUTPUT; my $error_msg = ''; local $_; while (<INPUT>) { if (/^die:(.*)/) { $error_msg = $1; last; } else { chomp; my @params = split ":"; if ($params[0] eq 'close') { &$callbackClose($params[1]); } else { installCallback(@params); } } } $error_msg and $error_msg .= join('', <INPUT>); waitpid $pid, 0; close INPUT; $error_msg and die $error_msg; } else { #- child process will run each transaction. $SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) }; my $db; eval { close INPUT; select((select(OUTPUT), $| = 1)[0]); $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString(); my $trans = c::rpmtransCreateSet($db, $prefix); if ($retry_package) { log::l("opened rpm database for retry transaction of 1 package only"); c::rpmtransAddPackage($trans, $retry_package->[$HEADER], packageName($retry_package), $isUpgrade && allowedToUpgrade(packageName($retry_package))); } else { log::l("opened rpm database for transaction of ". scalar @transToInstall ." new packages, still $nb after that to do"); c::rpmtransAddPackage($trans, $_->[$HEADER], packageName($_), $isUpgrade && allowedToUpgrade(packageName($_))) foreach @transToInstall; } c::rpmdepOrder($trans) or die "error ordering package list: " . c::rpmErrorString(); c::rpmtransSetScriptFd($trans, fileno LOG); log::l("rpmRunTransactions start"); my @probs = c::rpmRunTransactions($trans, $callbackOpen, sub { #- callbackClose print OUTPUT "close:$_[0]\n"; }, sub { #- installCallback print OUTPUT join(":", @_), "\n"; }, 1); log::l("rpmRunTransactions done, now trying to close still opened fd"); install_any::getFile('XXX'); #- close still opened fd. if (@probs) { my %parts; @probs = reverse grep { if (s/(installing package) .* (needs (?:.*) on the (.*) filesystem)/$1 $2/) { $parts{$3} ? 0 : ($parts{$3} = 1); } else { 1; } } reverse map { s|/mnt||; $_ } @probs; c::rpmdbClose($db); die "installation of rpms failed:\n ", join("\n ", @probs); } }; $@ and print OUTPUT "die:$@\n"; c::rpmdbClose($db); log::l("rpm database closed"); close OUTPUT; #- now search for child process which may be locking the cdrom, making it unable to be ejected. my (@killpid, %tree, $pid); local (*DIR, *F, $_); opendir DIR, "/proc"; while ($pid = readdir DIR) { $pid =~ /^\d+$/ or next; open F, "/proc/$pid/status"; while (<F>) { /^Pid:\s+(\d+)/ and $pid == $1 || die "incorrect pid reported for $pid (found $1)"; if (/^PPid:\s+(\d+)/) { $tree{$pid} and die "PPID already found for $pid, previously $tree{$pid}, now $1"; $tree{$pid} = $1; } } close F; } closedir DIR; foreach (keys %tree) { #- remove child of this process (which will terminate). $pid = $_; while ($pid = $tree{$pid}) { $pid == $$ and push @killpid, $_ } #- remove child of 1 direct that have a pid greater than current one. $_ > $$ && $tree{$_} == 1 and push @killpid, $_; } if (@killpid) { log::l("killing process ". join(", ", @killpid)); kill 15, @killpid; sleep 2; kill 9, @killpid; } c::_exit(0); } #- if we are using a retry mode, this means we have to split the transaction with only #- one package for each real transaction. unless ($retry_package) { my @badPackages; foreach (@transToInstall) { if (!packageFlagInstalled($_) && $_->[$MEDIUM]{selected} && !exists($ignoreBadPkg{packageName($_)})) { push @badPackages, $_; log::l("bad package $_->[$FILE]"); } else { packageFreeHeader($_); } } @transToInstall = @badPackages; #- if we are in retry mode, we have to fetch only one package at a time. $retry_package = shift @transToInstall; $retry_count = 3; } else { if ($retry_count) { log::l("retrying installing package $retry_package->[$FILE] alone in a transaction"); --$retry_count; } else { if (!packageFlagInstalled($retry_package) && $retry_package->[$MEDIUM]{selected} && !exists($ignoreBadPkg{packageName($retry_package)})) { log::l("bad package $retry_package->[$FILE] unable to be installed"); packageSetFlagSelected($retry_package, 0); cdie ("error installing package list: $retry_package->[$FILE]"); } packageFreeHeader($retry_package); $retry_package = shift @transToInstall; $retry_count = 3; } } } cleanHeaders($prefix); } while ($nb > 0 && !$pkgs::cancel_install); cleanHeaders($prefix); loopback::save_boot($loop_boot); } sub remove($$) { my ($prefix, $toRemove) = @_; return if $::g_auto_install || !@{$toRemove || []}; log::l("reading /usr/lib/rpm/rpmrc"); c::rpmReadConfigFiles() or die "can't read rpm config files"; log::l("\tdone"); my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString(); log::l("opened rpm database for removing old packages"); my $trans = c::rpmtransCreateSet($db, $prefix); foreach my $p (@$toRemove) { #- stuff remove all packages that matches $p, not a problem since $p has name-version-release format. c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p); } eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo"; my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); }; my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); }; #- we are not checking depends since it should come when #- upgrading a system. although we may remove some functionalities ? #- do not modify/translate the message used with installCallback since #- these are keys during progressing installation, or change in other #- place (install_steps_gtk.pm,...). installCallback("Starting removing other packages", scalar @$toRemove); if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) { die "removing of old rpms failed:\n ", join("\n ", @probs); } c::rpmtransFree($trans); c::rpmdbClose($db); log::l("rpm database closed"); #- keep in mind removing of these packages by cleaning $toRemove. @{$toRemove || []} = (); } sub selected_leaves { my ($packages) = @_; my %l; #- initialize l with all id, not couting base package. foreach my $id (0 .. $#{$packages->{depslist}}) { my $pkg = $packages->{depslist}[$id]; packageSelectedOrInstalled($pkg) && !packageFlagBase($pkg) or next; $l{$id} = 1; } foreach my $id (keys %l) { #- when a package is in a choice, increase its value in hash l, because #- it has to be examined before when we will select them later. #- NB: this number may be computed before to save time. foreach (packageDepsId($packages->{depslist}[$id])) { if (/\|/) { foreach (split '\|') { exists $l{$_} or next; $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id}; } } } } #- at this level, we can remove selected packages that are already #- required by other, but we have to sort according to choice usage. foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) { #- do not count already deleted id, else cycles will be removed. $l{$id} or next; foreach (packageDepsId($packages->{depslist}[$id])) { #- choices need no more to be examined, this has been done above. /\|/ and next; #- improve value of this one, so it will be selected before. $l{$id} < $l{$_} and $l{$id} = $l{$_}; $l{$_} = 0; } } #- now sort again according to decrementing value, and gives packages name. [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ]; } sub naughtyServers { my ($packages) = @_; my @naughtyServers = qw(FreeWnn MySQL am-utils boa cfengine cups finger-server freeswan imap jabber leafnode lpr mon ntp apache openssh-server pidentd postfix postgresql-server proftpd rwall rwho telnet-server webmin wu-ftpd ypbind); # portmap nfs-utils-clients grep { my $p = packageByName($packages, $_); $p && packageFlagSelected($p); } @naughtyServers; } 1;