# translation of DrakX-uz.po to Uzbek
# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
# Copyright (C) 2003 Mandrakesoft.
# Mashrab Kuvatov <kmashrab@uni-bremen.de>, 2003, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-uz\n"
"POT-Creation-Date: 2005-02-24 14:10+0100\n"
"PO-Revision-Date: 2004-10-10 00:41+0500\n"
"Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n"
"Language-Team: Uzbek <kmashrab@uni-bremen.de>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9\n"
#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Bandning qaysi turini qo'shmoqchisiz?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr ""
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Boshqadan urinish"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1317
#, c-format
msgid "Reboot"
msgstr "O'chirib-yoqish"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Setting up USB key"
msgstr "ISA PNP uskunalari o'rnatilmoqda: "
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Iltimos kutib turing, asbob-uskunalar aniqlanmoqda va moslanmoqda..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Avto-moslash"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Iltimos kutib turing, asbob-uskunalar aniqlanmoqda va moslanmoqda..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:393
#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:541
#: diskdrake/interactive.pm:546 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:183
#: install_any.pm:1564 install_any.pm:1587 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/netconnect.pm:1037
#: network/netconnect.pm:1041 network/netconnect.pm:1046
#: network/netconnect.pm:1072 network/netconnect.pm:1141
#: network/netconnect.pm:1145 network/netconnect.pm:1283
#: network/netconnect.pm:1288 network/netconnect.pm:1306
#: network/netconnect.pm:1491 printer/printerdrake.pm:238
#: printer/printerdrake.pm:245 printer/printerdrake.pm:270
#: printer/printerdrake.pm:416 printer/printerdrake.pm:421
#: printer/printerdrake.pm:434 printer/printerdrake.pm:444
#: printer/printerdrake.pm:508 printer/printerdrake.pm:635
#: printer/printerdrake.pm:1288 printer/printerdrake.pm:1335
#: printer/printerdrake.pm:1372 printer/printerdrake.pm:1416
#: printer/printerdrake.pm:1420 printer/printerdrake.pm:1434
#: printer/printerdrake.pm:1524 printer/printerdrake.pm:1605
#: printer/printerdrake.pm:1609 printer/printerdrake.pm:1613
#: printer/printerdrake.pm:1662 printer/printerdrake.pm:1719
#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1737
#: printer/printerdrake.pm:1848 printer/printerdrake.pm:1852
#: printer/printerdrake.pm:1889 printer/printerdrake.pm:1957
#: printer/printerdrake.pm:1975 printer/printerdrake.pm:1984
#: printer/printerdrake.pm:1993 printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2066 printer/printerdrake.pm:2159
#: printer/printerdrake.pm:2678 printer/printerdrake.pm:2949
#: printer/printerdrake.pm:2955 printer/printerdrake.pm:3501
#: printer/printerdrake.pm:3505 printer/printerdrake.pm:3509
#: printer/printerdrake.pm:3965 printer/printerdrake.pm:4205
#: printer/printerdrake.pm:4225 printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366 printer/printerdrake.pm:4483
#: standalone/drakTermServ:392 standalone/drakTermServ:753
#: standalone/drakTermServ:760 standalone/drakTermServ:779
#: standalone/drakTermServ:998 standalone/drakTermServ:1478
#: standalone/drakTermServ:1483 standalone/drakTermServ:1490
#: standalone/drakTermServ:1502 standalone/drakTermServ:1523
#: standalone/drakauth:35 standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1127 standalone/drakbackup:1160
#: standalone/drakbackup:1671 standalone/drakbackup:1827
#: standalone/drakbackup:2421 standalone/drakbackup:4110
#: standalone/drakbackup:4330 standalone/drakbug:191 standalone/drakclock:124
#: standalone/drakconnect:649 standalone/drakconnect:652
#: standalone/drakconnect:671 standalone/drakfloppy:297
#: standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:209
#: standalone/drakfont:222 standalone/drakfont:258 standalone/drakfont:604
#: standalone/draksplash:21 standalone/draksplash:501 standalone/drakxtv:107
#: standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Xato"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "Xato ro'y berdi"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Tizimning moslama fayllarini o'chirish"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "X dasturlaridan foydalanishga ruxsat etish"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1030
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Read carefully!"
msgstr "Diqqat bilan o'qing!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 Kb"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 Kb"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 Mb"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 Mb"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 Mb"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 Mb"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 Mb"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 Mb"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 Mb yoki ko'proq"
#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "X serveri"
#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "Grafik kartani tanlash"
#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr ""
#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Quyidagi Xorg paketini o'rnatib bo'lmadi: %s"
#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Grafik kartangizni xotirasining hajmini tanlang"
#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Xorg moslamasi"
#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Xorg'ning qanday moslamasini istaysiz?"
#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr ""
#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "Xinerama kengaytmasidan foydalanish"
#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Faqat \"%s\"%s kartasini moslash"
#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr ""
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""
#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:117 any.pm:914
#, c-format
msgid "Custom"
msgstr "Boshqa"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:737
#: printer/printerdrake.pm:4296 printer/printerdrake.pm:4742
#: standalone/draksplash:120 standalone/logdrake:174 standalone/net_applet:183
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Chiqish"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Grafik karta"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:111
#, c-format
msgid "Monitor"
msgstr "Monitor"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:221
#, c-format
msgid "Resolution"
msgstr "O'lcham"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Sinash"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:437
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:493 standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "Parametrlar"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"O'zgarishlarni saqlaymi?\n"
"Joriy moslama quyidagicha:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor for head #%d"
msgstr ""
#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor"
msgstr "Monitorni tanlash"
#: Xconfig/monitor.pm:118
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
#: Xconfig/monitor.pm:119 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Andoza"
#: Xconfig/monitor.pm:120 standalone/drakconnect:569 standalone/harddrake2:52
#: standalone/harddrake2:86
#, c-format
msgid "Vendor"
msgstr "Ishlab chiqaruvchi"
#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Plug'n Play aniqlash muvaffaqiyatsiz tugadi. Iltimos to'g'ri keladigan "
"monitorni tanlang"
#: Xconfig/monitor.pm:135
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
#: Xconfig/monitor.pm:142
#, c-format
msgid "Horizontal refresh rate"
msgstr ""
#: Xconfig/monitor.pm:143
#, c-format
msgid "Vertical refresh rate"
msgstr ""
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 rang (8 bit)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 mingta rang (15 bit)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 mingta rang (16 bit)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 millionta rang (24 bit)"
#: Xconfig/resolution_and_depth.pm:133
#, c-format
msgid "Resolutions"
msgstr "O'lchamlar"
#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr ""
#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "Grafik karta: %s"
#: Xconfig/resolution_and_depth.pm:285 interactive.pm:424
#: interactive/gtk.pm:768 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:317 interactive/newt.pm:419 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:490
#: standalone/drakbackup:3967 standalone/drakbackup:4027
#: standalone/drakbackup:4071 standalone/drakconnect:165
#: standalone/drakconnect:849 standalone/drakconnect:936
#: standalone/drakconnect:1035 standalone/drakfont:576 standalone/drakroam:388
#: standalone/drakups:208 standalone/net_monitor:344 ugtk2.pm:409 ugtk2.pm:506
#: ugtk2.pm:900 ugtk2.pm:923
#, c-format
msgid "Ok"
msgstr "Ok"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:826 interactive.pm:425 interactive/gtk.pm:772
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:316
#: interactive/newt.pm:423 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3579
#: standalone/drakautoinst:217 standalone/drakbackup:3893
#: standalone/drakbackup:3897 standalone/drakbackup:3955
#: standalone/drakconnect:164 standalone/drakconnect:934
#: standalone/drakconnect:1034 standalone/drakfont:668 standalone/drakfont:745
#: standalone/drakups:215 standalone/logdrake:174 standalone/net_monitor:343
#: ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:900
#, c-format
msgid "Cancel"
msgstr "Bekor qilish"
#: Xconfig/resolution_and_depth.pm:285 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:519
#: interactive/gtk.pm:638 interactive/gtk.pm:640 standalone/drakTermServ:284
#: standalone/drakbackup:3889 standalone/drakbug:104
#: standalone/drakconnect:160 standalone/drakconnect:245
#: standalone/drakfont:511 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Yordam"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Moslamalarni sinab ko'rish"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Moslamalarni sinab ko'rishni istaysizmi?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Diqqat: bu grafik kartani sinab ko'rish kompyuterni qotib qolishiga olib "
"kelishi mumkin"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Xato ro'y berdi:\n"
"%s\n"
"Ba'zi bir parametrlarni o'zgartirib sinab ko'ring"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "%d soniyadan keyin yopiladi"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Bu to'g'rimi?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tugmalar tartibi: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Sichqonchaning turi: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Sichqonchaning uskunasi: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Monitorning HorizSync: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Monitorning VertRefresh: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafik karta: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Grafik xotiraning hajmi: %s Kb\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr ""
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "O'lchamlar: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg drayveri: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Tizim yuklanayotganda grafik interfeys"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Men kompyuteringizni shunday o'rnatishim mumkinki, tizim yuklanayotganda "
"grafik interfeys (Xorg) ishga tushiriladi.\n"
"O'chirib-yoqgandan keyin Xorg ishga tushirilishini istaysizmi?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr ""
#: Xconfig/xfree.pm:571
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:140 harddrake/sound.pm:191 install_any.pm:652 interactive.pm:462
#: standalone/drakconnect:167 standalone/drakconnect:613 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:231
#: standalone/service_harddrake:204
#, c-format
msgid "Please wait"
msgstr "Iltimos kutib turing"
#: any.pm:140
#, c-format
msgid "Bootloader installation in progress"
msgstr "Operatsion tizim yuklagichini o'rnatish davom etmoqda"
#: any.pm:151
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:162
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
"Operatsion tizim yuklagichini o'rnatish muvaffaqiyatsiz tugadi. Quyidagi "
"xato ro'y berdi:"
#: any.pm:168
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
#: any.pm:206
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
#: any.pm:229 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Diskning birinchi sektori (MRB)"
#: any.pm:230
#, c-format
msgid "First sector of the root partition"
msgstr "Tub qismining birinchi sektori"
#: any.pm:232
#, c-format
msgid "On Floppy"
msgstr "Disketga"
#: any.pm:234 help.pm:739 printer/printerdrake.pm:3962
#, c-format
msgid "Skip"
msgstr "O'tkazib yuborish"
#: any.pm:238
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub dasturini o'rnatish"
#: any.pm:239
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Operatsion tizim yuklagichini qaerga o'rnatmoqchisiz?"
#: any.pm:264 standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "Tizimni yukash uslubini moslash"
#: any.pm:266 any.pm:298
#, c-format
msgid "Bootloader main options"
msgstr "Operatsion tizim yuklagichining asosiy parametrlari"
#: any.pm:270
#, c-format
msgid "Give the ram size in MB"
msgstr "RAM'ning hajmini kiriting (Mb)"
#: any.pm:272
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
#: any.pm:273 any.pm:606 authentication.pm:176
#, c-format
msgid "The passwords do not match"
msgstr "Maxfiy so'zlar mos kelmaydi"
#: any.pm:273 any.pm:606 authentication.pm:176 diskdrake/interactive.pm:1270
#, c-format
msgid "Please try again"
msgstr "Iltimos yana urinib ko'ring"
#: any.pm:278 any.pm:301
#, c-format
msgid "Bootloader to use"
msgstr "OT yuklagichi"
#: any.pm:280 any.pm:303
#, c-format
msgid "Boot device"
msgstr "Tizimni yuklash uskunasi"
#: any.pm:282
#, c-format
msgid "Delay before booting default image"
msgstr "Andoza tasvirni yuklashdan oldin kutish vaqti"
#: any.pm:283
#, c-format
msgid "Enable ACPI"
msgstr "ACPI'ni yoqish"
#: any.pm:285
#, c-format
msgid "Force no APIC"
msgstr "APIC'ni taqiqlash"
#: any.pm:287
#, c-format
msgid "Force No Local APIC"
msgstr ""
#: any.pm:289 any.pm:633 authentication.pm:181 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:633 printer/printerdrake.pm:1596
#: printer/printerdrake.pm:1716 standalone/drakbackup:1653
#: standalone/drakbackup:3495 standalone/drakups:295
#, c-format
msgid "Password"
msgstr "Maxfiy so'z"
#: any.pm:290 any.pm:634 authentication.pm:182
#, c-format
msgid "Password (again)"
msgstr "Maxfiy so'z (yana)"
#: any.pm:291
#, c-format
msgid "Restrict command line options"
msgstr ""
#: any.pm:291
#, c-format
msgid "restrict"
msgstr "chegaralash"
#: any.pm:293
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Tizimni yuklashda /tmp direktoriyasini bo'shatish"
#: any.pm:294
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Kerak bo'lsa, RAM'ning aniq hajmi (%d Mb topildi)"
#: any.pm:302
#, c-format
msgid "Init Message"
msgstr ""
#: any.pm:304
#, c-format
msgid "Open Firmware Delay"
msgstr ""
#: any.pm:305
#, c-format
msgid "Kernel Boot Timeout"
msgstr ""
#: any.pm:306
#, c-format
msgid "Enable CD Boot?"
msgstr ""
#: any.pm:307
#, c-format
msgid "Enable OF Boot?"
msgstr ""
#: any.pm:308
#, c-format
msgid "Default OS?"
msgstr "Andoza OT?"
#: any.pm:361
#, c-format
msgid "Image"
msgstr "Rasm"
#: any.pm:362 any.pm:372
#, c-format
msgid "Root"
msgstr "Diskning tub qismi"
#: any.pm:363 any.pm:385
#, c-format
msgid "Append"
msgstr ""
#: any.pm:365 standalone/drakboot:309 standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "Video usuli"
#: any.pm:367
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:368
#, c-format
msgid "Network profile"
msgstr "Tarmoqning profili"
#: any.pm:377 any.pm:382 any.pm:384
#, c-format
msgid "Label"
msgstr "Belgi"
#: any.pm:379 any.pm:389 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Andoza"
#: any.pm:386
#, c-format
msgid "Initrd-size"
msgstr "Initrd'ning hajmi"
#: any.pm:388
#, c-format
msgid "NoVideo"
msgstr "Videosiz"
#: any.pm:399
#, c-format
msgid "Empty label not allowed"
msgstr "Bo'sh belgini ishlatish mumkin emas"
#: any.pm:400
#, c-format
msgid "You must specify a kernel image"
msgstr "Kernelning tasvirini ko'rsatishingiz kerak."
#: any.pm:400
#, c-format
msgid "You must specify a root partition"
msgstr "Diskning tub qismini kiritishingiz shart"
#: any.pm:401
#, c-format
msgid "This label is already used"
msgstr "Belgi allaqachon ishlatilgan"
#: any.pm:415
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Bandning qaysi turini qo'shmoqchisiz?"
#: any.pm:416
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:416
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Boshqa OT (SunOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Boshqa OT (MacOS...)"
#: any.pm:417
#, c-format
msgid "Other OS (Windows...)"
msgstr "Boshqa OT (Windows...)"
#: any.pm:445
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Tizimni yuklash menyusining bandlari.\n"
"Qo'shimcha bandlar yaratishingiz yoki mavjud bo'lgan bandlarni "
"o'zgartirishingiz mumkin."
#: any.pm:592
#, c-format
msgid "access to X programs"
msgstr "X dasturlaridan foydalanishga ruxsat etish"
#: any.pm:593
#, c-format
msgid "access to rpm tools"
msgstr "RPM vositalaridan foydalanishga ruxsat etish"
#: any.pm:594
#, c-format
msgid "allow \"su\""
msgstr "\"su\" buyrug'idan foydalanishga ruxsat etish"
#: any.pm:595
#, c-format
msgid "access to administrative files"
msgstr "boshqaruv fayllariga ruxsat"
#: any.pm:596
#, c-format
msgid "access to network tools"
msgstr "tarmoq vositalardan foydalanishni ruxsat etish"
#: any.pm:597
#, c-format
msgid "access to compilation tools"
msgstr ""
#: any.pm:602
#, c-format
msgid "(already added %s)"
msgstr "(%s allaqachon qo'shilgan)"
#: any.pm:607
#, c-format
msgid "This password is too simple"
msgstr "Bu maxfiy so'z juda oddiy"
#: any.pm:608
#, c-format
msgid "Please give a user name"
msgstr "Iltimos foydalanuvchining ismini kiriting"
#: any.pm:609
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Foydalanuvchining ismi faqat kichkina harf, son, \"-\" va \"_\" belgilaridan "
"iborat bo'lishi shart"
#: any.pm:610
#, c-format
msgid "The user name is too long"
msgstr "Foydalanuvchining ismi juda uzun"
#: any.pm:611
#, c-format
msgid "This user name has already been added"
msgstr "Foydalanuvchining ismi allaqachon qo'shilgan"
#: any.pm:615
#, c-format
msgid "Add user"
msgstr "Foydalanuvchini qo'shish"
#: any.pm:616
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Foydalanuvchini kiriting\n"
"%s"
#: any.pm:619 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:191
#: printer/printerdrake.pm:376 printer/printerdrake.pm:4742
#: standalone/drakbackup:2708 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Tayyor"
#: any.pm:620 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Qabul qilish"
#: any.pm:631
#, c-format
msgid "Real name"
msgstr "Foydalanuvchining haqiqiy ismi-sharifi"
#: any.pm:632 standalone/drakbackup:1648
#, c-format
msgid "Login name"
msgstr "Foydalanuvchi"
#: any.pm:635
#, c-format
msgid "Shell"
msgstr "Konsol"
#: any.pm:637
#, c-format
msgid "Icon"
msgstr "Nishoncha"
#: any.pm:684 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Tizimga avtomatik ravishda kirish"
#: any.pm:685
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Kompyuterni bitta foydalanuvchi avtomatik ravishda kirishga moslash mumkin."
#: any.pm:686 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Bu qulaylikdan foydalanishni istaysizmi?"
#: any.pm:687
#, c-format
msgid "Choose the default user:"
msgstr "Andoza foydalanuvchini tanlang:"
#: any.pm:688
#, c-format
msgid "Choose the window manager to run:"
msgstr "Oynalar boshqaruvchisini tanlang:"
#: any.pm:700
#, c-format
msgid "Please choose a language to use."
msgstr "Iltimos foydalanish uchun tilni tanlang."
#: any.pm:701
#, c-format
msgid "Language choice"
msgstr "Tilni tanlash"
#: any.pm:727
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
#: any.pm:746 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Andoza sifatida Yunikoddan foydalanish"
#: any.pm:747 help.pm:647
#, c-format
msgid "All languages"
msgstr "Hamma tillar"
#: any.pm:786 help.pm:566 help.pm:855 install_steps_interactive.pm:946
#, c-format
msgid "Country / Region"
msgstr "Davlat / Region"
#: any.pm:787
#, c-format
msgid "Please choose your country."
msgstr "Davlatingizni tanlang."
#: any.pm:789
#, c-format
msgid "Here is the full list of available countries"
msgstr "Mavjud bo'lgan davlatlarning to'liq ro'yxati"
#: any.pm:790
#, c-format
msgid "Other Countries"
msgstr "Boshqa davlatlar"
#: any.pm:798
#, c-format
msgid "Input method:"
msgstr "Kiritish usuli:"
#: any.pm:799 install_any.pm:388 network/netconnect.pm:323
#: network/netconnect.pm:328 printer/printerdrake.pm:99
#: printer/printerdrake.pm:2111
#, c-format
msgid "None"
msgstr "Yo'q"
#: any.pm:914
#, c-format
msgid "No sharing"
msgstr ""
#: any.pm:914
#, c-format
msgid "Allow all users"
msgstr "Hamma foydalanuvchilarga ruxsat"
#: any.pm:918
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
#: any.pm:930
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
#: any.pm:933
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
#: any.pm:941
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Siz NFS yoki Samba yordamida eksport qilishingiz mumkin. Iltimos bittasini "
"tanlang."
#: any.pm:966
#, c-format
msgid "Launch userdrake"
msgstr "Userdrake dasturini ishga tushirish"
#: any.pm:966 printer/printerdrake.pm:3802 printer/printerdrake.pm:3805
#: printer/printerdrake.pm:3806 printer/printerdrake.pm:3807
#: printer/printerdrake.pm:5036 standalone/drakTermServ:294
#: standalone/drakbackup:4089 standalone/drakbug:126 standalone/drakfont:499
#: standalone/drakfont:595 standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "Yopish"
#: any.pm:968
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:16
#, c-format
msgid "Local file"
msgstr "Lokal fayl"
#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:19
#, c-format
msgid "Smart Card"
msgstr ""
#: authentication.pm:20 authentication.pm:148
#, c-format
msgid "Windows Domain"
msgstr ""
#: authentication.pm:21
#, c-format
msgid "Active Directory with SFU"
msgstr ""
#: authentication.pm:22
#, c-format
msgid "Active Directory with Winbind"
msgstr ""
#: authentication.pm:51
#, c-format
msgid "Local file:"
msgstr "Lokal fayl:"
#: authentication.pm:51
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:52
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:52
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:53
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:53
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:54
#, c-format
msgid "Windows Domain:"
msgstr "Windows domeni:"
#: authentication.pm:54
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:55
#, c-format
msgid "Active Directory with SFU:"
msgstr ""
#: authentication.pm:55 authentication.pm:56
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
#: authentication.pm:56
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""
#: authentication.pm:81
#, c-format
msgid "Authentication LDAP"
msgstr "Tasdiqlovchi LDAP"
#: authentication.pm:82
#, fuzzy, c-format
msgid "LDAP Base dn"
msgstr "LDAP maxfiy so'z:"
#: authentication.pm:83 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "LDAP serveri"
#: authentication.pm:96 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "oson"
#: authentication.pm:97
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:98
#, c-format
msgid "SSL"
msgstr ""
#: authentication.pm:99
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:106 authentication.pm:144
#, c-format
msgid "Authentication Active Directory"
msgstr ""
#: authentication.pm:107 authentication.pm:146 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Domen"
#: authentication.pm:109 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:135 share/compssUsers.pl:81
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Server"
#: authentication.pm:110
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "Ma'lumot bazasi"
#: authentication.pm:111
#, c-format
msgid "Use Anonymous BIND "
msgstr ""
#: authentication.pm:112
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:113
#, c-format
msgid "Password for user"
msgstr "Foydalanuvchi uchun maxfiy so'z"
#: authentication.pm:114
#, c-format
msgid "Encryption"
msgstr "Kodlash"
#: authentication.pm:125
#, c-format
msgid "Authentication NIS"
msgstr "Tasdiqlovchi NIS"
#: authentication.pm:126
#, c-format
msgid "NIS Domain"
msgstr "NIS domeni"
#: authentication.pm:127
#, c-format
msgid "NIS Server"
msgstr "NIS serveri"
#: authentication.pm:132
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
#: authentication.pm:144
#, c-format
msgid "Authentication Windows Domain"
msgstr ""
#: authentication.pm:149
#, c-format
msgid "Domain Admin User Name"
msgstr ""
#: authentication.pm:150
#, c-format
msgid "Domain Admin Password"
msgstr ""
#: authentication.pm:151
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""
#: authentication.pm:152
#, c-format
msgid "Default Idmap "
msgstr "Andoza Idmap "
#: authentication.pm:165
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
#: authentication.pm:166
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "Root uchun maxfiy so'z"
#: authentication.pm:167 standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "Tasdiqlash usuli"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:172 help.pm:722
#, c-format
msgid "No password"
msgstr "Maxfiy so'zsiz"
#: authentication.pm:178
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr ""
"Bu maxfiy so'z juda qisqa (u eng kami %d belgidan iborat bo'lishi shart)"
#: authentication.pm:183 network/netconnect.pm:328 network/netconnect.pm:634
#: standalone/drakauth:23 standalone/drakauth:25 standalone/drakconnect:459
#, c-format
msgid "Authentication"
msgstr "Tasdiqlash"
#: authentication.pm:296
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:728
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Operatsion tizimni tanlash dasturiga marhamat!\n"
"\n"
"Yuqoridagi ro'yxatdan operasion tizimni tanlang\n"
"yoki andoza uchun kutib turing.\n"
"\n"
#: bootloader.pm:815
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO (grafik menyu)"
#: bootloader.pm:816
#, c-format
msgid "LILO with text menu"
msgstr "LILO (matn menyu)"
#: bootloader.pm:817
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:818
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:881
#, c-format
msgid "not enough room in /boot"
msgstr "/boot direktoriyasida etarli joy yo'q"
#: bootloader.pm:1295
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Operatsion tizim yuklagichini diskning %s qismiga o'rnatib bo'lmaydi\n"
#: bootloader.pm:1340
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
#: bootloader.pm:1355
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1356
#, c-format
msgid "Re-install Boot Loader"
msgstr "OT yuklagichini qaytadan o'rnatish"
#: common.pm:125
#, c-format
msgid "KB"
msgstr "Kb"
#: common.pm:125
#, c-format
msgid "MB"
msgstr "Mb"
#: common.pm:125
#, c-format
msgid "GB"
msgstr "Gb"
#: common.pm:133
#, c-format
msgid "TB"
msgstr "Tb"
#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d minut"
#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 minut"
#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d soniya"
#: common.pm:240
#, c-format
msgid "kdesu missing"
msgstr "kdesu dasturi etishmayapti"
#: common.pm:243
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper dasturi etishmayapti"
#: crypto.pm:14 crypto.pm:43 lang.pm:202 network/adsl_consts.pm:50
#: network/adsl_consts.pm:58 network/adsl_consts.pm:66
#, c-format
msgid "Austria"
msgstr "Avstriya"
#: crypto.pm:15 crypto.pm:34 lang.pm:209 network/adsl_consts.pm:74
#: network/adsl_consts.pm:82 network/adsl_consts.pm:93
#: network/adsl_consts.pm:101 network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "Belgiya"
#: crypto.pm:16 lang.pm:230 network/adsl_consts.pm:780
#: network/adsl_consts.pm:788 network/adsl_consts.pm:798
#, c-format
msgid "Switzerland"
msgstr "Shveytsariya"
#: crypto.pm:17 lang.pm:237
#, c-format
msgid "Costa Rica"
msgstr "Kosta Rika"
#: crypto.pm:18 crypto.pm:35 lang.pm:243 network/adsl_consts.pm:319
#, c-format
msgid "Czech Republic"
msgstr "Chex Respublikasi"
#: crypto.pm:19 crypto.pm:36 lang.pm:244 network/adsl_consts.pm:437
#: network/adsl_consts.pm:445
#, c-format
msgid "Germany"
msgstr "Olmoniya"
#: crypto.pm:20 crypto.pm:33 lang.pm:262 network/adsl_consts.pm:343
#: network/adsl_consts.pm:354 network/adsl_consts.pm:365
#: network/adsl_consts.pm:375 network/adsl_consts.pm:385
#: network/adsl_consts.pm:396 network/adsl_consts.pm:407
#: network/adsl_consts.pm:417 network/adsl_consts.pm:427
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "Frantsiya"
#: crypto.pm:21 crypto.pm:37 lang.pm:275 network/adsl_consts.pm:455
#, c-format
msgid "Greece"
msgstr "Gretsiya"
#: crypto.pm:22 lang.pm:286 network/adsl_consts.pm:463
#, c-format
msgid "Hungary"
msgstr "Vengriya"
#: crypto.pm:23 crypto.pm:42 lang.pm:295 network/adsl_consts.pm:489
#: network/adsl_consts.pm:499 network/adsl_consts.pm:509
#: network/adsl_consts.pm:517 network/netconnect.pm:49 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italiya"
#: crypto.pm:24 crypto.pm:41 lang.pm:347 network/adsl_consts.pm:545
#: network/adsl_consts.pm:553 network/adsl_consts.pm:561
#: network/adsl_consts.pm:569 network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "Niderlandlar"
#: crypto.pm:25 crypto.pm:38 lang.pm:348 network/adsl_consts.pm:577
#: network/adsl_consts.pm:582 network/adsl_consts.pm:587
#: network/adsl_consts.pm:592 network/adsl_consts.pm:597
#: network/adsl_consts.pm:602 network/adsl_consts.pm:607
#, c-format
msgid "Norway"
msgstr "Norvegiya"
#: crypto.pm:26 lang.pm:360 network/adsl_consts.pm:614
#: network/adsl_consts.pm:624
#, c-format
msgid "Poland"
msgstr "Polsha"
#: crypto.pm:27 crypto.pm:39 lang.pm:377 network/adsl_consts.pm:772
#, c-format
msgid "Sweden"
msgstr "Shvetsiya"
#: crypto.pm:28 lang.pm:382
#, c-format
msgid "Slovakia"
msgstr "Slovakiya"
#: crypto.pm:29 lang.pm:406
#, c-format
msgid "Taiwan"
msgstr "Tayvan"
#: crypto.pm:40 crypto.pm:75 lang.pm:411 network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "Qo'shma Shtatlar"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Yangi"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:443 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Uzish"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:440 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Ulash"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:435
#: diskdrake/interactive.pm:653 diskdrake/interactive.pm:672
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Ulash nuqtasi"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Iltimos WebDAV serverining URL'ini kiriting"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL http:// yoki https:// bilan boshlanishi shart"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:504
#: diskdrake/interactive.pm:1166 diskdrake/interactive.pm:1241
#, c-format
msgid "Mount point: "
msgstr "Ulash nuqtasi: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1248
#, c-format
msgid "Options: %s"
msgstr "Parametrlar: %s"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "Iltimos avvalo ma'lumotlaringizdan zahira nusxa oling"
#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Agar rejangizda aboot dasturini ishlatish bo'lsa, diskning boshida bo'sh joy "
"(2048 sektor etadi)\n"
"qoldirish esingizdan chiqmasin"
#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Yordamchi"
#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "Amalni tanlang"
#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Diskingiz bitta katta Microsoft Windows qismidan iborat.\n"
"Avvalo, uning hajmini o'zgartirishni taklif qilaman\n"
"(uni bosing keyin \"Hajmini o'gartirish\" tugmasini bosing)."
#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "Iltimos diskning qismini bosing"
#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:482
#: standalone/drakbackup:2943 standalone/drakbackup:3003
#, c-format
msgid "Details"
msgstr "Tafsilotlar"
#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "Qattiq disklar topilmadi"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Journalised FS"
msgstr "Jurnalli FS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "Svop"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:284 mouse.pm:168
#: services.pm:162 standalone/drakbackup:1609 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Boshqa"
#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1181
#, c-format
msgid "Empty"
msgstr "Bo'sh"
#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "Fayl tizimning turlari:"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "Buning o'rniga \"%s\"ni ishlating"
#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:459
#, c-format
msgid "Create"
msgstr "Yaratish"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:436 diskdrake/interactive.pm:606
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:106 standalone/harddrake2:115
#, c-format
msgid "Type"
msgstr "Turi"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:444
#: standalone/drakperm:124 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "O'chirish"
#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Avvalo \"Unmount\"ni ishlating"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "Diskning boshqa qismini tanlash"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "Diskning qismini tanlash"
#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "Chiqish"
#: diskdrake/interactive.pm:253 help.pm:530
#, c-format
msgid "Undo"
msgstr "Bekor qilish"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "Odiy usuliga o'tish"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "Ekspert usuliga o'tish"
#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "Bunga qaramasdan davom etishni istaysizmi?"
#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "Saqlamasdan chiqish"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Diskning qismlar jadvalini saqlamasdan chiqaymi?"
#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "/etc/fstab fayliga kiritilgan o'zgarishlarni saqlashni istaysizmi?"
#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Diskning qismlar jadvaliga kiritilgan o'zgarishlar kuchga kirishi uchun "
"kompyuterni o'chirib-yoqishingiz kerak."
#: diskdrake/interactive.pm:307 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Hammasini tozalash"
#: diskdrake/interactive.pm:308 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Avto-taqsimlash"
#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "Ko'proq"
#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "Qattiq disk haqida ma'lumot"
#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "Diskning hamma asosiy qismlari ishlatilmoqda"
#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "Boshqa qism qo'shib bo'lmaydi"
#: diskdrake/interactive.pm:348
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Diskda kengaytirilgan qism yaratish uchun iltimos bitta qismni o'chiring"
#: diskdrake/interactive.pm:359 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Diskning qismlar jadvalini saqlash"
#: diskdrake/interactive.pm:360 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Diskning qismlar jadvalini qaytadan tiklash"
#: diskdrake/interactive.pm:361 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr ""
#: diskdrake/interactive.pm:363 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Diskning qismlar jadvalini qaytadan yuklash"
#: diskdrake/interactive.pm:365
#, c-format
msgid "Removable media automounting"
msgstr ""
#: diskdrake/interactive.pm:376 diskdrake/interactive.pm:402
#, c-format
msgid "Select file"
msgstr "Faylni tanlash"
#: diskdrake/interactive.pm:388
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
#: diskdrake/interactive.pm:417
#, c-format
msgid "Trying to rescue partition table"
msgstr ""
#: diskdrake/interactive.pm:423
#, c-format
msgid "Detailed information"
msgstr "Batafsil ma'lumot"
#: diskdrake/interactive.pm:438 diskdrake/interactive.pm:743
#, c-format
msgid "Resize"
msgstr "Hajmini o'zgartirish"
#: diskdrake/interactive.pm:439
#, c-format
msgid "Format"
msgstr "Format qilish"
#: diskdrake/interactive.pm:441
#, c-format
msgid "Add to RAID"
msgstr "RAID'ga qo'shish"
#: diskdrake/interactive.pm:442
#, c-format
msgid "Add to LVM"
msgstr "LVM'ga qo'shish"
#: diskdrake/interactive.pm:445
#, c-format
msgid "Remove from RAID"
msgstr "RAID'dan olib tashlash"
#: diskdrake/interactive.pm:446
#, c-format
msgid "Remove from LVM"
msgstr "LVM'dan olib tashlash"
#: diskdrake/interactive.pm:447
#, c-format
msgid "Modify RAID"
msgstr "RAID'ni o'zgartirish"
#: diskdrake/interactive.pm:448
#, c-format
msgid "Use for loopback"
msgstr "Loopback uchun ishlatish"
#: diskdrake/interactive.pm:497
#, c-format
msgid "Create a new partition"
msgstr "Diskda yangi qism yaratish"
#: diskdrake/interactive.pm:500
#, c-format
msgid "Start sector: "
msgstr "Boshlang'ich sektor: "
#: diskdrake/interactive.pm:502 diskdrake/interactive.pm:899
#, c-format
msgid "Size in MB: "
msgstr "Hajmi (Mb): "
#: diskdrake/interactive.pm:503 diskdrake/interactive.pm:900
#, c-format
msgid "Filesystem type: "
msgstr "Fayl tizimning turi: "
#: diskdrake/interactive.pm:508
#, c-format
msgid "Preference: "
msgstr "Afzal ko'rish: "
#: diskdrake/interactive.pm:511
#, c-format
msgid "Logical volume name "
msgstr ""
#: diskdrake/interactive.pm:541
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Yangi qismni yaratib bo'lmaydi.\n"
"Chunki siz diskning asosiy qismlarining maksimal soniga etdingiz.\n"
"Avvalo diskning asosiy qismini olib tanshlang keyin diskning kengaytirilgan "
"qismini yarating."
#: diskdrake/interactive.pm:571
#, c-format
msgid "Remove the loopback file?"
msgstr "Loopback faylini olib tashlaymi?"
#: diskdrake/interactive.pm:590
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Diskning %s qismining turini o'zgartirishdan keyin undagi hamma ma'lumot "
"yo'qoladi"
#: diskdrake/interactive.pm:602
#, c-format
msgid "Change partition type"
msgstr "Diskning qismining turini o'zgartirish"
#: diskdrake/interactive.pm:603 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Sizga qanaqa fayl tizimi kerak?"
#: diskdrake/interactive.pm:611
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Ext2 fayl tizimidan ext3 fayl tizimiga o'tilmoqda"
#: diskdrake/interactive.pm:640
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "%s loopback faylini qaerga ulamoqchisiz?"
#: diskdrake/interactive.pm:641
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "%s uskunani qaerga ulamoqchisiz?"
#: diskdrake/interactive.pm:646
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
#: diskdrake/interactive.pm:671
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Diskning %s qismini qaerga ulamoqchisiz?"
#: diskdrake/interactive.pm:695 diskdrake/interactive.pm:774
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Hajm o'zgartirilmoqda"
#: diskdrake/interactive.pm:695
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "FAT fayl tizimining bog'lari hisoblanmoqda"
#: diskdrake/interactive.pm:731
#, c-format
msgid "This partition is not resizeable"
msgstr "Diskning bu qismining hajmini o'zgartirib bo'lmaydi"
#: diskdrake/interactive.pm:736
#, c-format
msgid "All data on this partition should be backed-up"
msgstr ""
#: diskdrake/interactive.pm:738
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Diskning %s qismining hajmini o'zgartirgandan keyin u erdagi hamma ma'lumot "
"yo'qoladi"
#: diskdrake/interactive.pm:743
#, c-format
msgid "Choose the new size"
msgstr "Yangi hajmni tanlang"
#: diskdrake/interactive.pm:744
#, c-format
msgid "New size in MB: "
msgstr "Yangi hajm (Mb): "
#: diskdrake/interactive.pm:787 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
#: diskdrake/interactive.pm:825
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Qo'shish uchun mavjud bo'lgan RAID'ni tanlang"
#: diskdrake/interactive.pm:827 diskdrake/interactive.pm:844
#, c-format
msgid "new"
msgstr "yangi"
#: diskdrake/interactive.pm:842
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Qo'shish uchun mavjud bo'lgan LVM'ni tanlang"
#: diskdrake/interactive.pm:848
#, c-format
msgid "LVM name?"
msgstr "LVM nomi?"
#: diskdrake/interactive.pm:884
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Diskning bu qismini loopback uchun ishlatib bo'lmaydi"
#: diskdrake/interactive.pm:897
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:898
#, c-format
msgid "Loopback file name: "
msgstr "Loopback faylining nomi:"
#: diskdrake/interactive.pm:903
#, c-format
msgid "Give a file name"
msgstr "Faylning nomini kiriting"
#: diskdrake/interactive.pm:906
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Fylni boshqa loopback ishlatayapti, boshqasini tanlang"
#: diskdrake/interactive.pm:907
#, c-format
msgid "File already exists. Use it?"
msgstr "Fayl allaqachon mavjud. Ishlataymi?"
#: diskdrake/interactive.pm:930
#, c-format
msgid "Mount options"
msgstr "Ulash parametrlari"
#: diskdrake/interactive.pm:937
#, c-format
msgid "Various"
msgstr "Har xil"
#: diskdrake/interactive.pm:1002
#, c-format
msgid "device"
msgstr "uskuna"
#: diskdrake/interactive.pm:1003
#, c-format
msgid "level"
msgstr "daraja"
#: diskdrake/interactive.pm:1004
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "Yangi hajm (Mb): "
#: diskdrake/interactive.pm:1021
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Ehtiyot bo'ling: bu operatsiya xavfli."
#: diskdrake/interactive.pm:1036
#, c-format
msgid "What type of partitioning?"
msgstr "Diskni qismlarga bo'lishning qaysi turi?"
#: diskdrake/interactive.pm:1074
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr ""
"O'zgarishlar amalda qo'llanilishi uchun kompyuterni o'chirib-yoqish kerak"
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "%s diskining qismlar jadvali diskga saqlanish arafasida!"
#: diskdrake/interactive.pm:1096
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Diskning %s qismi format qilgandan keyin u erdagi hamma ma'lumot yo'qoladi"
#: diskdrake/interactive.pm:1112
#, c-format
msgid "Move files to the new partition"
msgstr "Fayllarni diskning yangi qismiga ko'chirish"
#: diskdrake/interactive.pm:1112
#, c-format
msgid "Hide files"
msgstr "Fayllarni yashirish"
#: diskdrake/interactive.pm:1113
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Direktoriyada (%s) allaqachon ma'lumot bor\n"
"(%s)"
#: diskdrake/interactive.pm:1124
#, c-format
msgid "Moving files to the new partition"
msgstr "Fayllar diskning yangi qismiga ko'chirilmoqda"
#: diskdrake/interactive.pm:1128
#, c-format
msgid "Copying %s"
msgstr "%s'dan nusxa ko'chirilmoqda"
#: diskdrake/interactive.pm:1132
#, c-format
msgid "Removing %s"
msgstr "%s olib tashlanmoqda"
#: diskdrake/interactive.pm:1146
#, c-format
msgid "partition %s is now known as %s"
msgstr "diskning %s qismi endi %s sifatida ma'lum"
#: diskdrake/interactive.pm:1147
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""
#: diskdrake/interactive.pm:1167 diskdrake/interactive.pm:1226
#, c-format
msgid "Device: "
msgstr "Uskuna: "
#: diskdrake/interactive.pm:1168
#, c-format
msgid "Devfs name: "
msgstr "Devfs nomi: "
#: diskdrake/interactive.pm:1169
#, c-format
msgid "Volume label: "
msgstr ""
#: diskdrake/interactive.pm:1170
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS diskining harfi: %s (tavakkaliga)\n"
#: diskdrake/interactive.pm:1174 diskdrake/interactive.pm:1183
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Type: "
msgstr "Turi: "
#: diskdrake/interactive.pm:1178 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "Nomi: "
#: diskdrake/interactive.pm:1185
#, c-format
msgid "Start: sector %s\n"
msgstr "Boshi: sektor %s\n"
#: diskdrake/interactive.pm:1186
#, c-format
msgid "Size: %s"
msgstr "Hajmi: %s"
#: diskdrake/interactive.pm:1188
#, c-format
msgid ", %s sectors"
msgstr ", %s sektor"
#: diskdrake/interactive.pm:1190
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Tsilindr %d dan %d gacha\n"
#: diskdrake/interactive.pm:1191
#, c-format
msgid "Number of logical extents: %d"
msgstr ""
#: diskdrake/interactive.pm:1192
#, c-format
msgid "Formatted\n"
msgstr "Format qilingan\n"
#: diskdrake/interactive.pm:1193
#, c-format
msgid "Not formatted\n"
msgstr "Format qilinmagan\n"
#: diskdrake/interactive.pm:1194
#, c-format
msgid "Mounted\n"
msgstr "Ulangan\n"
#: diskdrake/interactive.pm:1195
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1197
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"Loopback fayl(lar):\n"
" %s\n"
#: diskdrake/interactive.pm:1198
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
#: diskdrake/interactive.pm:1200
#, c-format
msgid "Level %s\n"
msgstr "%s daraja\n"
#: diskdrake/interactive.pm:1201
#, c-format
msgid "Chunk size %d KiB\n"
msgstr ""
#: diskdrake/interactive.pm:1202
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID disklar %s\n"
#: diskdrake/interactive.pm:1204
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback faylining nomi: %s"
#: diskdrake/interactive.pm:1207
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Ehtimol, diskning bu qismi\n"
"drayverning qismidir.\n"
"Yaxshisi unga teginmang.\n"
#: diskdrake/interactive.pm:1210
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
#: diskdrake/interactive.pm:1227
#, c-format
msgid "Read-only"
msgstr "Faqat o'qishga"
#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s\n"
msgstr "Hajmi: %s\n"
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometriya: %s tsilindr, %s kallacha, %s sektor\n"
#: diskdrake/interactive.pm:1230
#, c-format
msgid "Info: "
msgstr "Ma'lumot: "
#: diskdrake/interactive.pm:1231
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM disklar %s\n"
#: diskdrake/interactive.pm:1232
#, c-format
msgid "Partition table type: %s\n"
msgstr "Disk qismlar jadvalining turi: %s\n"
#: diskdrake/interactive.pm:1233
#, c-format
msgid "on channel %d id %d\n"
msgstr ""
#: diskdrake/interactive.pm:1265
#, c-format
msgid "Filesystem encryption key"
msgstr "Fayl tizimning kodlash kaliti"
#: diskdrake/interactive.pm:1266
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Fayl tizimngizning kodlash kalitini tanlang"
#: diskdrake/interactive.pm:1269
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Kodlash kaliti juda sodda (u eng kami %d belgidan iborat bo'lishi shart)"
#: diskdrake/interactive.pm:1270
#, c-format
msgid "The encryption keys do not match"
msgstr "Kodlash kalitlari mos kelmaydi"
#: diskdrake/interactive.pm:1273 network/netconnect.pm:1136
#: standalone/drakconnect:397
#, c-format
msgid "Encryption key"
msgstr "Kodlash kaliti"
#: diskdrake/interactive.pm:1274
#, c-format
msgid "Encryption key (again)"
msgstr "Kodlash kaliti (yana)"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Turini o'zgartirish"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Qaysi foydalanuvchi"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Boshqasi"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3494
#, c-format
msgid "Username"
msgstr "Foydalanuvchi"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Serverlarni qidirish"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Yangi serverlarni qidirish"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Paket (%s) o'rnatilishi kerak. Uni o'rnatishni istaysizmi?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Shart bo'lgan paket (%s) etishmayapti"
#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "Paketlar o'rnatilmoqda..."
#: do_pkgs.pm:217
#, c-format
msgid "Removing packages..."
msgstr "Paketlar o'chirilmoqda..."
#: fs.pm:487 fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "Disk qismi (%s) ulanmoqda"
#: fs.pm:488 fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "Disk qismini (%s) direktoriyaga (%s) ulash muvaffaqiyatsiz tugadi"
#: fs.pm:508 fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "%s tekshirilmoqda"
#: fs.pm:553 partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s'ni ajratishda xato: %s"
#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "Diskning svop qismi (%s) yoqilmoqda"
#: fs/format.pm:44 fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "Diskning qismi (%s) format qilinmoqda"
#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "%s fayli yaratilmoqda va format qilinmoqda"
#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "%s'ni %s turida qanday format qilishni bilmayman"
#: fs/format.pm:88 fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s turida %s'ni format qilish muvaffaqiyatsiz tugadi"
#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "Fayl tizimlarni faqat o'qishga deb ulash."
#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "Oddiy foydalanuvchilarga yozish ruxsatini berish"
#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Oddiy foydalanuvchilarga faqat o'qishga ruxsatini berish"
#: fs/type.pm:370
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr ""
"Hajmi 16 Mb'dan kichik bo'lgan qismlar uchun JFS fayl tizimini ishlatib "
"bo'lmaydi"
#: fs/type.pm:371
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr ""
"Hajmi 32 Mb'dan kichik bo'lgan qismlar uchun ReiserFS fayl tizimini ishlatib "
"bo'lmaydi"
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "/usr bilan"
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "server"
#: fsedit.pm:184
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
#: fsedit.pm:401
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Ulash nuqtalari \"/\" belgisi bilan boshlanishi shart"
#: fsedit.pm:402
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Ulash nuqtalari faqat son yoki harflardan iborat bo'lishi mumkin"
#: fsedit.pm:403
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "%s ulash nuqtali diskning qismi allaqachon mavjud\n"
#: fsedit.pm:405
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:408
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr ""
#: fsedit.pm:410
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
#: fsedit.pm:413
#, c-format
msgid ""
"You may not be able to install lilo (since lilo does not handle a LV on "
"multiple PVs)"
msgstr ""
#: fsedit.pm:416 fsedit.pm:418
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Bu direktoriya tub fayl tizimida bo'lishi kerak"
#: fsedit.pm:420 fsedit.pm:422
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Bu ulash nuqtasi uchun haqiqiy fayl tizimi (ext2/ext3, reiserfs, xfs, yoki "
"jfs) kerak\n"
#: fsedit.pm:424
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "%s ulash nuqtasi uchun kodlangan fayl tizimini ishlatib bo'lmaydi"
#: fsedit.pm:485
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Avto-taqsimlash uchun etarlicha joy yo'q"
#: fsedit.pm:487
#, c-format
msgid "Nothing to do"
msgstr "Bajarish uchun hech narsa yo'q"
#: harddrake/data.pm:61 install_any.pm:1505
#, c-format
msgid "Floppy"
msgstr "Disket"
#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:81 install_any.pm:1506
#, c-format
msgid "Hard Disk"
msgstr "Hard Disk"
#: harddrake/data.pm:90 install_any.pm:1507
#, c-format
msgid "CDROM"
msgstr "Kompakt-disk"
#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr "Yozadigan kompakt-disk/DVD"
#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:120 standalone/drakbackup:2051
#, c-format
msgid "Tape"
msgstr "Magnit tasma"
#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr "Video karta"
#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr "TV karta"
#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr "Boshqa multimedia uskunalar"
#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr "Tovush kartasi"
#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr "Veb-kamera"
#: harddrake/data.pm:180
#, c-format
msgid "Processors"
msgstr "Protsessorlar"
#: harddrake/data.pm:190
#, c-format
msgid "ISDN adapters"
msgstr "ISDN adapterlar"
#: harddrake/data.pm:200
#, c-format
msgid "Ethernetcard"
msgstr "Ethernet karta"
#: harddrake/data.pm:218 network/netconnect.pm:518
#, c-format
msgid "Modem"
msgstr "Modem"
#: harddrake/data.pm:228
#, c-format
msgid "ADSL adapters"
msgstr "ADSL adapterlar"
#: harddrake/data.pm:242
#, c-format
msgid "Memory"
msgstr "Xotira"
#: harddrake/data.pm:251
#, c-format
msgid "AGP controllers"
msgstr "AGP kontrollerlar"
#: harddrake/data.pm:260 help.pm:186 help.pm:855
#: install_steps_interactive.pm:978
#, c-format
msgid "Printer"
msgstr "Printer"
#: harddrake/data.pm:270
#, c-format
msgid "Joystick"
msgstr "Joystik"
#: harddrake/data.pm:280
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA kontrollerlar"
#: harddrake/data.pm:289
#, c-format
msgid "SATA controllers"
msgstr "SATA kontrollerlar"
#: harddrake/data.pm:298
#, c-format
msgid "Firewire controllers"
msgstr "Fayervol kontrollerlar"
#: harddrake/data.pm:307
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA kontrollerlar"
#: harddrake/data.pm:316
#, c-format
msgid "SCSI controllers"
msgstr "SCSI kontrollerlar"
#: harddrake/data.pm:325
#, c-format
msgid "USB controllers"
msgstr "USB kontrollerlar"
#: harddrake/data.pm:334
#, c-format
msgid "USB ports"
msgstr "USB portlar"
#: harddrake/data.pm:343
#, c-format
msgid "SMBus controllers"
msgstr "SMBus kontrollerlar"
#: harddrake/data.pm:352
#, c-format
msgid "Bridges and system controllers"
msgstr "Ko'priklar va tizimning kontrollerlari"
#: harddrake/data.pm:361
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:370 help.pm:855 install_steps_interactive.pm:118
#: install_steps_interactive.pm:938 standalone/keyboarddrake:28
#, c-format
msgid "Keyboard"
msgstr "Tugmatag"
#: harddrake/data.pm:383 help.pm:855 install_steps_interactive.pm:971
#, c-format
msgid "Mouse"
msgstr "Sichqoncha"
#: harddrake/data.pm:397
#, c-format
msgid "Scanner"
msgstr "Skanner"
#: harddrake/data.pm:407 standalone/harddrake2:439
#, c-format
msgid "Unknown/Others"
msgstr "Noma'lum/Boshqalar"
#: harddrake/data.pm:435
#, c-format
msgid "cpu # "
msgstr "protsessor # "
#: harddrake/sound.pm:191 standalone/drakconnect:169
#: standalone/drakconnect:615
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Iltimos kutib turing... Moslamalar qo'llanilmoqda"
#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "Boshqa drayver yo'q"
#: harddrake/sound.pm:228
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Sizning %s tovush kartangizga, joriy holda %s drayveri ishlatilmoqda, ma'lum "
"bo'lgan boshqa OSS/ALSA drayveri mavjud emas."
#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "Tovushni moslash"
#: harddrake/sound.pm:236
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Bu erda %s tovush kartangiz uchun boshqa drayverni (OSS yoki ALSA) "
"tanlashingiz mumkin."
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Sizning kartangiz %s\"%s\" drayverini ishlatmoqda (kartangizning andoza "
"drayveri \"%s\")"
#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Drayver:"
#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr "Nosozliklarni topish va bartaraf qilish"
#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1039
#: network/netconnect.pm:504 printer/printerdrake.pm:1142
#: printer/printerdrake.pm:2142 printer/printerdrake.pm:2228
#: printer/printerdrake.pm:2274 printer/printerdrake.pm:2341
#: printer/printerdrake.pm:2376 printer/printerdrake.pm:2684
#: printer/printerdrake.pm:2691 printer/printerdrake.pm:3643
#: printer/printerdrake.pm:3970 printer/printerdrake.pm:4092
#: printer/printerdrake.pm:5183 standalone/drakTermServ:325
#: standalone/drakTermServ:1111 standalone/drakTermServ:1172
#: standalone/drakTermServ:1821 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:165 standalone/drakclock:224
#: standalone/drakconnect:971 standalone/drakfloppy:291 standalone/drakups:27
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Diqqat"
#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr ""
#: harddrake/sound.pm:279
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "Ma'lum bo'lgan drayver yo'q"
#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""
"Sizning \"%s\" tovush kartangiz uchun ma'lum bo'lgan drayver mavjud emas."
#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "Noma'lum drayver"
#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Xato: Tovush kartangiz uchun \"%s\" drayveri ro'yxatda yo'q"
#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr "Tovush nosozliklarini topish va bartaraf qilish"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "Boshqa drayverni tanlash"
#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Ixtiyoriy drayver tanlanmoqda"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Agar sizning tovush kartangizga to'g'ri keladigan drayverni rostdan "
"bilsangiz,\n"
"uni yuqoridagi ro'yxatdan tanlashingiz mumkin.\n"
"\n"
"Sizning \"%s\" tovush kartangizning joriy drayveri \"%s\" "
#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "Avto-aniqlash"
#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "Noma'lum|Andoza"
#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Noma'lum|CPH05X (bt878) [ko'p ishlab chiqaruvchilar]"
#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Noma'lum|CPH06X (bt878) [aksariyat ishlab chiqaruvchilar]"
#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "Kartaning modeli:"
#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr ""
#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr ""
#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Davom etishdan oldin litsenziyaning shartlarini e'tibor bilan o'qib\n"
"chiqing. Litsenziya butun Mandrakelinux'ga tegishli. Agar uning barcha\n"
"shartlariga rozi bo'lsangiz, \"%s\"ni tanlang. Agar rozi bo'lmasangiz,\n"
"kompyuterni o'chirib-yoqish uchun \"%s\" tugmasini bosing."
#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "Qabul qilish"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 printer/printerdrake.pm:1595 printer/printerdrake.pm:1715
#, c-format
msgid "User name"
msgstr "Foydalanuvchi"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:689 interactive.pm:424 interactive/newt.pm:317
#: network/netconnect.pm:278 network/tools.pm:182 printer/printerdrake.pm:3581
#: standalone/drakTermServ:382 standalone/drakbackup:3946
#: standalone/drakbackup:4040 standalone/drakbackup:4057
#: standalone/drakbackup:4075 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "Keyingi"
#: help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:385
#, c-format
msgid "Advanced"
msgstr "Qo'shimcha"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandrakelinux bir nechta kompakt-disklarda tarqatiladi. Agar tanlangan "
"paket\n"
"boshqa kompakt-diskda joylashgan bo'lsa, DrakX joriy kompakt-diskni\n"
"chiqaradi va tegishlisini qo'yishni so'raydi. Agar so'ralgan kompakt-disk "
"sizda\n"
"bo'lmasa, \"%s\" tugmasini bosing. Bu holda, tegishli paketlar o'rnatilmaydi."
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "Ish stantsiyasi"
#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "Tuzish"
#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "Grafik muhit"
#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Paketlarni bittama-bitta tanlash"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Yangilash"
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "X bilan"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Asosiy qo'llanmalar bilan"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Haqiqiy minimal o'rnatish"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:792
#: interactive.pm:149 modules/interactive.pm:71 standalone/drakbackup:2508
#: standalone/draksec:54 standalone/harddrake2:306 standalone/net_applet:255
#: ugtk2.pm:899 wizards.pm:156
#, c-format
msgid "No"
msgstr "Yo'q"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:792 interactive.pm:149
#: modules/interactive.pm:71 printer/printerdrake.pm:736
#: standalone/drakbackup:2508 standalone/drakgw:287 standalone/drakgw:288
#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
#: standalone/harddrake2:305 standalone/net_applet:259 ugtk2.pm:899
#: wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Ha"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2333 standalone/drakbackup:2337
#: standalone/drakbackup:2341 standalone/drakbackup:2345
#, c-format
msgid "Configure"
msgstr "Moslash"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:873
#, c-format
msgid "Hardware clock set to GMT"
msgstr ""
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr ""
#: help.pm:220
#, fuzzy, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Monitor\n"
"\n"
" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n"
"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n"
"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin."
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Monitor\n"
"\n"
" Odatda, o'rnatuvchi kompyuteringizga ulangan monitorni\n"
"avtomatik ravishda aniqlaydi va moslaydi. Agar bu noto'g'ri\n"
"bo'lsa, aslida ulangan monitorni ro'yxatdan tanlashingiz mumkin."
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Bo'sh joydan foydalanish"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Diskda bor qismlardan foydalanish"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Diskning Windows qismidagi bo'sh joydan foydalanish"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "Butun diskni o'chirish"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Windows'ni o'chirish"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Diskni boshqacha bo'lish"
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Avto-o'rnatish disketni yaratish"
#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Replay"
msgstr "Qaytarish"
#: help.pm:409 install_steps_interactive.pm:1328
#, c-format
msgid "Automated"
msgstr "Avtomatik"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Save packages selection"
msgstr "Paketlar tanlovini saqlash"
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:425
#: interactive/newt.pm:316 printer/printerdrake.pm:3579
#: standalone/drakTermServ:361 standalone/drakbackup:3906
#: standalone/drakbackup:3945 standalone/drakbackup:4056
#: standalone/drakbackup:4071 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "Oldingi"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:156 standalone/drakbackup:4103
#, c-format
msgid "Install"
msgstr "O'rnatish"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Xavfsizlik boshqaruvchisi"
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Odiy/ekspert usuliga o'tish"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
|