package network::isdn_consts; # $Id$
use vars qw(@ISA @EXPORT);
@ISA = qw(Exporter);
@EXPORT = qw(@isdndata @isdn_capi);

our @isdndata =
  (
   { description => "Teles|16.0",               #1 irq, mem, io
    driver => 'hisax',
    type => '1',
    irq => '5',
    mem => '0xd000',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Teles|8.0", #2 irq, mem
    driver => 'hisax',
    type => '2',
    irq => '9',
    mem => '0xd800',
    card => 'isa',
   },
   { description => "Teles|16.3 (ISA non PnP)", #3 irq, io
    driver => 'hisax',
    type => '3',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Teles|16.3c (ISA PnP)", #14 irq, io
    driver => 'hisax',
    type => '14',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Creatix/Teles|Generic (ISA PnP)",	#4 irq, io0 (ISAC), io1 (HSCX)
    driver => 'hisax',
    type => '4',
    irq => '5',
    io0 => '0x0000',
    io1 => '0x0000',
    card => 'isa',
   },
   { description => "Teles|generic", #21 no parameter
    driver => 'hisax',
    type => '21',
    card => 'pci',
   },
   { description => "Teles|16.3 (PCMCIA)",	#8 irq, io
    driver => 'hisax',
    type => '8',
    irq => '',
    io => '0x',
    card => 'isa',
   },
   { description => "Teles|S0Box", #25 irq, io (of the used lpt port)
    driver => 'hisax',
    type => '25',
    irq => '7',
    io => '0x378',
    card => 'isa',
   },
   { description => "ELSA|PCC/PCF cards", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA|card)
    driver => 'hisax',
    type => '6',
    io => "",
    card => 'isa',
   },
   { description => "ELSA|Quickstep 1000", #7 irq, io  (from isapnp setup)
    driver => 'hisax',
    type => '7',
    irq => '5',
    io => '0x300',
    card => 'isa',
   },
   { description => "ELSA|Quickstep 1000", #18 no parameter
    driver => 'hisax',
    type => '18',
    card => 'pci',
   },
   { description => "ELSA|Quickstep 3000", #18 no parameter
    driver => 'hisax',
    type => '18',
    card => 'pci',
   },
   { description => "ELSA|generic (PCMCIA)", #10 irq, io  (set with card manager)
    driver => 'hisax',
    type => '10',
    irq => '',
    io => '0x',
    card => 'isa',
   },
   { description => "ELSA|MicroLink (PCMCIA)", #10 irq, io  (set with card manager)
    driver => 'elsa_cs',
    card => 'isa',
   },
   { description => "ITK|ix1-micro Rev.2", #9 irq, io
    driver => 'hisax',
    type => '9',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Eicon.Diehl|Diva (ISA PnP)", #11 irq, io
    driver => 'hisax',
    type => '11',
    irq => '9',
    io => '0x180',
    card => 'isa',
   },
   { description => "Eicon.Diehl|Diva 20", #11 no parameter
    driver => 'hisax',
    type => '11',
    card => 'pci',
   },
   { description => "Eicon.Diehl|Diva 20PRO", #11 no parameter
    driver => 'hisax',
    type => '11',
    card => 'pci',
   },
   { description => "Eicon.Diehl|Diva 20_U", #11 no parameter
    driver => 'hisax',
    type => '11',
    card => 'pci',
   },
   { description => "Eicon.Diehl|Diva 20PRO_U", #11 no parameter
    driver => 'hisax',
    type => '11',
    card => 'pci',
   },
   { description => "ASUS|COM ISDNLink", #12 irq, io  (from isapnp setup)
    driver => 'hisax',
    type => '12',
    irq => '5',
    io => '0x200',
    card => 'isa',
   },
   { description => "ASUS|COM ISDNLink",
    driver => 'hisax',
    type => '35',
    card => 'pci',
   },
   { description => "DynaLink|Any",
    driver => 'hisax',
    type => '12',
    card => 'pci',
   },
   { description => "DynaLink|IS64PH, ASUSCOM", #36
    driver => 'hisax',
    type => '36',
    card => 'pci',
   },
   { description => "HFC|2BS0 based cards", #13 irq, io
    driver => 'hisax',
    type => '13',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "HFC|2BDS0", #35 none
    driver => 'hisax',
    type => '35',
    card => 'pci',
   },
   { description => "HFC|2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
    driver => 'hisax',
    type => '37',
    card => 'isa',
   },
   { description => "Sedlbauer|Speed Card", #15 irq, io
    driver => 'hisax',
    type => '15',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Sedlbauer|PC/104", #15 irq, io
    driver => 'hisax',
    type => '15',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Sedlbauer|Speed Card", #15 no parameter
    driver => 'hisax',
    type => '15',
    card => 'pci',
   },
   { description => "Sedlbauer|Speed Star (PCMCIA)", #22 irq, io (set with card manager)
    driver => 'sedlbauer_cs',
    card => 'isa',
   },
   { description => "Sedlbauer|Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
    driver => 'hisax',
    type => '28',
    irq => '9',
    io => '0xd80',
    card => 'isa',
    firmware => '/usr/lib/isdn/ISAR.BIN',
   },
   { description => "Sedlbauer|Speed Fax+", #28 no parameter
    driver => 'hisax',
    type => '28',
    card => 'pci',
    firmware => '/usr/lib/isdn/ISAR.BIN',
   },
   { description => "USR|Sportster internal", #16 irq, io
    driver => 'hisax',
    type => '16',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Generic|MIC card",	#17 irq, io
    driver => 'hisax',
    type => '17',
    irq => '9',
    io => '0xd80',
    card => 'isa',
   },
   { description => "Compaq|ISDN S0 card", #19 irq, io0, io1, io (from isapnp setup io=IO2)
    driver => 'hisax',
    type => '19',
    irq => '5',
    io => '0x0000',
    io0 => '0x0000',
    io1 => '0x0000',
    card => 'isa',
   },
   { description => "Generic|NETjet card", #20 no parameter
    driver => 'hisax',
    type => '20',
    card => 'pci',
   },
   { description => "Dr. Neuhaus|Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
    driver => 'hisax',
    type => '24',
    irq => '5',
    io0 => '0x0000',
    io1 => '0x0000',
    card => 'isa',
   },
   { description => "Dr. Neuhaus|Niccy", ##24 no parameter
    driver => 'hisax',
    type => '24',
    card => 'pci',
   },
   { description => "AVM|A1 (Fritz) (ISA non PnP)", #5 irq, io
    driver => 'hisax',
    type => '5',
    irq => '10',
    io => '0x300',
    card => 'isa',
   },
   { description => "AVM|ISA Pnp generic", #27 irq, io  (from isapnp setup)
    driver => 'hisax',
    type => '27',
    irq => '5',
    io => '0x300',
    card => 'isa',
   },
   { description => "AVM|A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
    driver => 'hisax',
    type => '26',
    irq => '',
    card => 'isa',
   },
   { description => "AVM|PCI (Fritz!)", #27 no parameter
    driver => 'hisax',
    type => '27',
    card => 'pci',
   },
   { description => "AVM|B1",
    driver => 'b1pci',
    card => 'pci',
   },
   { description => "Siemens|I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)   
    driver => 'hisax',
    type => '29',
    irq => '9',
    io => '0xd80',
    mem => '0xd000',
    card => 'isa',
   },
   { description => "ACER|P10 (ISA Pnp)",	#30 irq, io (from isapnp setup)   
    driver => 'hisax',
    type => '30',
    irq => '5',
    io => '0x300',
    card => 'isa',
   },
   { description => "HST|Saphir (ISA Pnp)", #31 irq, io
    driver => 'hisax',
    type => '31',
    irq => '5',
    io => '0x300',
    card => 'isa',
   },
   { description => "Telekom|A4T", #32 none
    driver => 'hisax',
    type => '32',
    card => 'pci',
   },
   { description => "Scitel|Quadro", #33 subcontroller (4*S0, subctrl 1...4)
    driver => 'hisax',
    type => '33',
    card => 'pci',
   },
   { description => "Gazel|ISDN cards", #34 irq,io
    driver => 'hisax',
    type => '34',
    irq => '5',
    io => '0x300',
    card => 'isa',
   },
   { description => "Gazel|Gazel ISDN cards", #34 none
    driver => 'hisax',
    type => '34',
    card => 'pci',
   },
   { description => "Winbond|W6692 and Winbond based cards", #36 none
    driver => 'hisax',
    type => '36',
    card => 'pci',
   },
   { description => "BeWAN|R834",
    driver => 'hisax_st5481',
    type => '99',
    card => 'usb',
   },
   { description => "Gazel|128",
    driver => 'hisax_st5481',
    type => '99',
    card => 'usb',
   },
  );

#- cards than can be used with capi drivers
our @isdn_capi =
  (
   {
    vendor => 0x1131,
    id => 0x5402,
    description => 'AVM Audiovisuelles|Fritz DSL ISDN/DSL Adapter',
    bus => 'PCI',
    driver => 'fcdsl',
    firmware => 'fdslbase.bin'
   },
   {
    vendor => 0x1244,
    id => 0x0a00,
    description => 'AVM Audiovisuelles|A1 ISDN Adapter [Fritz] CAPI',
    bus => 'PCI',
    driver => 'fcpci'
   },
   {
    vendor => 0x1244,
    id => 0x0e00,
    description => 'AVM Audiovisuelles|A1 ISDN Adapter [Fritz] CAPI',
    bus => 'PCI',
    driver => 'fcpci'
   },
   {
    vendor => 0x1244,
    id => 0x0f00,
    description => 'AVM Audiovisuelles|Fritz DSL ISDN/DSL Adapter',
    bus => 'PCI',
    driver => 'fcdsl',
    firmware => 'fdslbase.bin'
   },
   {
    vendor => 0x1244,
    id => 0x2700,
    description => 'AVM Audiovisuelles|Fritz!Card DSL SL',
    bus => 'PCI',
    driver => 'fcdslsl',
    firmware => 'fdssbase.bin'
   },
   {
    vendor => 0x1244,
    id => 0x2900,
    description => 'AVM Audiovisuelles|Fritz DSL Ver. 2.0',
    bus => 'PCI',
    driver => 'fcdsl2',
    firmware => 'fds2base.bin'
   },
   {
    vendor => 0x057c,
    id => 0x0c00,
    description => 'AVM GmbH|FritzCard USB ISDN TA',
    bus => 'USB',
    driver => 'fcusb'
   },
   {
    vendor => 0x057c,
    id => 0x1000,
    description => 'AVM GmbH|FritzCard USB 2 Ver. 2.0 ISDN TA',
    bus => 'USB',
    driver => 'fcusb2',
    firmware => 'fus2base.frm'
   },
   {
    vendor => 0x057c,
    id => 0x1900,
    description => 'AVM GmbH|FritzCard USB 2 Ver. 3.0 ISDN TA',
    bus => 'USB',
    driver => 'fcusb2',
    firmware => 'fus3base.frm'
   },
   {
    vendor => 0x057c,
    id => 0x2000,
    description => 'AVM GmbH|Fritz X USB ISDN TA',
    bus => 'USB',
    driver => 'fxusb'
   },
   {
    vendor => 0x057c,
    id => 0x2300,
    description => 'AVM GmbH|FtitzCard USB DSL ISDN TA/ DSL Modem',
    bus => 'USB',
    driver => 'fcdslusb',
    firmware => 'fdsubase.frm'
   },
   {
    vendor => 0x057c,
    id => 0x2800,
    description => 'AVM GmbH|Fritz X USB OEM ISDN TA',
    bus => 'USB',
    driver => 'fxusb_CZ'
   },
   {
    vendor => 0x057c,
    id => 0x3000,
    description => 'AVM GmbH|FtitzCard USB DSL SL USB',
    bus => 'USB',
    driver => 'fcdslusba',
    firmware => 'fdlabase.frm'
   },
   {
    vendor => 0x057c,
    id => 0x3500,
    description => 'AVM GmbH|FtitzCard USB DSL SL USB Analog',
    bus => 'USB',
    driver => 'fcdslslusb',
    firmware => 'fdlubase.frm',
   },
  );


1;
 allow users to test nouveau
  by selecting it in XFdrake

Version 0.1.256 - 24 March 2009

- fix driver for "nVidia Corporation|NV11 [GeForce2 MX/MX 400]" (#48928)
- add new NVIDIA ids from 180.41
- use e100 instead of eepro100 since kernel team disabled the latest (#49085)
- Monitor DB
  o add Sony TV Bravia KDL-32D3000 (fcrozat)
  o add Samsung SyncMaster 2053BW (dams)

Version 0.1.255 - 18 March 2009

- re-enable fglrx driver
- use (old) Intel 810 driver for 0x8086:0x3582, fixes bug #44371

Version 0.1.254 - 16 March 2009

- Monitor DB
  o add Acer AL1716 (Steve Morris)
  o add Iiyama Prolite H481S (aapgorilla)
  o add Packard Bell Viseo 223Ws (patrick)

Version 0.1.253 - 5 March 2009

- disable fglrx and nvidia71xx as they do not support X.org server 1.6
  (IgnoreABI does not work for them)
- use nvidia173 for non-SSE processors as well, the support was restored
- Monitor DB
  o add back "LCD Panel 800x480"
  o add ViewSonic VX2260WM (Donald Stewart)
  o sync with latest Fedora

Version 0.1.252 - 29 January 2009

- add new NVIDIA cards supported in 180.25

Version 0.1.251 - 16 January 2009

- re-work the blacklist of cards that don't work with nv to be
  more general and include more confirmed IDs

Version 0.1.250 - 11 January 2009

- add NVIDIA GeForce 9400 GT ID, adjust 7050 group to include it 
  (doesn't work with nv)

Version 0.1.249 - 23 December 2008

- add new NVIDIA IDs from 180.18
- add new ATI IDs from 8.12

Version 0.1.248 - 3 December 2008

- Monitor DB
  o remove duplicated entries
  o sync with latest Fedora

Version 0.1.247 - 2 December 2008

- Monitor DB
  o further sync with Fedora

Version 0.1.246 - 2 December 2008

- fix "INTERNAL ERROR: good_default_monitor (Generic|*) is unknown in
  MonitorsDB" after syncing with redhat

Version 0.1.245 - 29 November 2008

- NSC chips now use geode driver, nsc driver no longer builds
- drop the special case for VIA K8M800, works OK with openchrome now
- add new NVIDIA and ATI IDs from new driver versions
- add "Flat Panel 1600x900" (#45091)
- Monitor DB
  o sync monitor vendor names with Fedora
  o partial sync with Fedora
- use "i810" instead of "intel" driver on older i810 because it
  segfaults when using XAA acceleration (#43916)

Version 0.1.244 - 13 November 2008

- add new mouse definition (Logitech G5v2)
- vesa not framebuffer for ST Kyro, per dams
- disable 3D on ATI Rage 128-based cards (hard lock the machine on
  x86_64)
- use pata_cs5536 for Geode IDE controllers
- default to 800x480 on TECO TR2350 (Omatek netbook)

Version 0.1.243 - 01 October 2008

- updated DKMS alias DB

Version 0.1.242 - 01 October 2008

- drop separate Radeon HD 4xxx category: radeonhd supports these now

Version 0.1.241 - 30 September 2008

- add ID 0605 for NVIDIA GeForce 9800 GT (reported and tested by Zoida A)

Version 0.1.240 - 25 September 2008

- update dkms modules info

Version 0.1.239 - 18 September 2008

- update dkms modules info (mainly for rt2860 and rtl8187se)

Version 0.1.238 - 18 September 2008

- add support for Intel G41 graphics adapter
- use 'vesa' driver not 'nv' for GeForce 7050 (#38391)

Version 0.1.237 - 4 September 2008

- use pata_jmicron for jmicron controllers
</code></pre></td></tr></table>
</div> <!-- class=content -->
<div class='footer'>generated by <a href='https://git.zx2c4.com/cgit/about/'>cgit v1.2.1</a> (<a href='https://git-scm.com/'>git 2.21.0</a>) at 2025-01-01 12:17:53 +0000</div>
</div> <!-- id=cgit -->
</body>
</html>