package network::ethernet; use network::network; use modules; use any; use detect_devices; use common; use run_program; use network::tools; use vars qw(@ISA @EXPORT); use MDK::Common::Globals "network", qw($in $prefix); @ISA = qw(Exporter); @EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet); sub configure_cable { my ($netcnx, $netc, $intf, $first_time) = @_; $::isInstall and $in->set_help('configureNetworkCable'); $netcnx->{type}='cable'; # $netcnx->{cable}={}; # $in->ask_from_entries_ref(N("Cable connection"), # N("Please enter your host name if you know it. # Some DHCP servers require the hostname to work. # Your host name should be a fully-qualified host name, # such as ``mybox.mylab.myco.com''."), # [N("Host name:")], [ \$netcnx->{cable}{hostname} ]); if ($::expert) { my @m = ( { description => "dhcpcd", c => 1}, { description => "dhcpxd", c => 3}, { description => "dhcp-client", c => 4}, ); if (my $f = $in->ask_from_listf(N("Connect to the Internet"), N("Which dhcp client do you want to use? Default is dhcpcd"), sub { $_[0]{description} }, \@m)) { $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd)); $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd)); $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client)); } } else { $in->do_pkgs->install(qw(dhcpcd)); } go_ethernet($netc, $intf, 'dhcp', '', '', $first_time); write_cnx_script($netc, "cable", qq( /sbin/ifup $netc->{NET_DEVICE} ), qq( /sbin/ifdown $netc->{NET_DEVICE} ), $netcnx->{type}); 1; } sub configure_lan { my ($netcnx, $netc, $intf, $first_time) = @_; $::isInstall and $in->set_help('configureNetworkIP'); configureNetwork($netc, $intf, $first_time) or return; configureNetwork2($in, $prefix, $netc, $intf); $netc->{NETWORKING} = "yes"; if ($netc->{GATEWAY} || grep { $_->{BOOTPROTO} eq 'dhcp' } values %$intf) { $netcnx->{type}='lan'; $netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = ''; $netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE}; write_cnx_script($netc, "local network", qq( /etc/rc.d/init.d/network restart ), qq( /etc/rc.d/init.d/network stop /sbin/ifup lo ), $netcnx->{type}); } $::isStandalone and modules::write_conf($prefix); 1; } sub conf_network_card { my ($netc, $intf, $type, $ipadr, $netadr) = @_; #-type =static or dhcp any::load_category($in, 'network/main|usb', !$::expert, 1); my @all_cards = conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $netadr); my $interface; @all_cards == () and $in->ask_warn('', N("No ethernet network adapter has been detected on your system. I cannot set up this connection type.")) and return; @all_cards == 1 and $interface = $all_cards[0][0] and goto l1; again : $interface = $in->ask_from_list(N("Choose the network interface"), N("Please choose which network adapter you want to use to connect to Internet"), [ map { $_->[0] . ($_->[1] ? " (using module $_->[1])" : "") } @all_cards ] ) or return; defined $interface or goto again; l1: $::isStandalone and modules::write_conf($prefix); my $device = conf_network_card_backend($netc, $intf, $type, $interface, $ipadr, $netadr, $interface); # if ( $::isStandalone and !($type eq "dhcp")) { # $in->ask_yesorno(N("Network interface"), # N("I'm about to restart the network device:\n") . $device . N("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device"); # } 1; } #- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling load_category($in, 'network/main|usb', !$::expert, 1) or load_category_backend before calling this function. Basically, you call this function in 2 times. #- input #- $prefix #- $netc #- $intf #- $type : type of interface, must be given if $interface is : string : "static" or "dhcp" #- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards #- $ipadr : facultative, ip address of the interface : string #- $netadr : facultative, netaddress of the interface : string #- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned. #- $intf output: $device is the result of #- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;; #- $intf->{$device}->{BOOTPROTO} : $type #- $intf->{$device}->{NETMASK} : '255.255.255.0' #- $intf->{$device}->{NETWORK} : $netadr #- $intf->{$device}->{ONBOOT} : "yes" #- $netc output: #- $netc->{nb_cards} : nb of ethernet cards #- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device #- output: #- $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call. #- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/ sub conf_network_card_backend { my ($netc, $intf, $type, $interface, $ipadr, $netadr) = @_; #-type =static or dhcp if (!$interface) { my @all_cards = detect_devices::getNet(); $netc->{nb_cards} = @all_cards; my @devs = detect_devices::pcmcia_probe(); modules::mergein_conf("$prefix/etc/modules.conf"); my $saved_driver; return map { my $interface = $_; my $a = modules::get_alias($interface); my $b; foreach (@devs) { $_->{device} eq $interface and $b = $_->{driver}; } $a ||= $b; if ($a) { $saved_driver = $a } [$interface, $saved_driver]; } @all_cards; } my ($device) = $interface =~ /(eth[0-9]+)/ or die("the interface is not an ethx"); $netc->{NET_DEVICE} = $device; #- one consider that there is only ONE Internet connection device.. @{$intf->{$device}}{qw(DEVICE BOOTPROTO NETMASK NETWORK ONBOOT)} = ($device, $type, '255.255.255.0', $netadr, 'yes'); $intf->{$device}{IPADDR} = $ipadr if $ipadr; $device; } sub go_ethernet { my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_; conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return; $netc->{NET_INTERFACE}=$netc->{NET_DEVICE}; configureNetwork($netc, $intf, $first_time) or return; # if ( $::isStandalone and $netc->{NET_DEVICE}) { # $in->ask_yesorno(N("Network interface"), # N("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1) and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}"); # } 1; } sub configureNetwork { my ($netc, $intf, $first_time) = @_; local $_; any::load_category($in, 'network/main|usb|pcmcia', !$::expert, 1) or return; my @l = detect_devices::getNet() or die N("no network card found"); my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef); configureNetwork_step_1: my $n_card = 0; $netc ||= {}; my $last; foreach (@l) { my $intf2 = findIntf($intf ||= {}, $_); add2hash($intf2, $last); add2hash($intf2, { NETMASK => '255.255.255.0' }); configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $all_cards[$n_card][1]) or return; $last = $intf2; $n_card++; } #- { #- my $wait = $o->wait_message(N("Hostname"), N("Determining host name and domain...")); #- network::guessHostname($o->{prefix}, $o->{netc}, $o->{intf}); #- } $last or return; if ($last->{BOOTPROTO} =~ /^(dhcp|bootp)$/) { $netc->{minus_one} = 1; my $dhcp_hostname = $netc->{HOSTNAME}; $::isInstall and $in->set_help('configureNetworkHostDHCP'); $in->ask_from(N("Configuring network"), N("Please enter your host name if you know it. Some DHCP servers require the hostname to work. Your host name should be a fully-qualified host name, such as ``mybox.mylab.myco.com''."), [ { label => N("Host name"), val => \$netc->{HOSTNAME} }]) or goto configureNetwork_step_1; $netc->{HOSTNAME} ne $dhcp_hostname and $netc->{DHCP_HOSTNAME} = $netc->{HOSTNAME}; } else { configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1; } miscellaneousNetwork($in) or goto configureNetwork_step_1; 1; } 1;