package mouse; # $Id$ #use diagnostics; #use strict; #-###################################################################################### #- misc imports #-###################################################################################### use common; use modules; use detect_devices; use run_program; use devices; use modules; use any; use log; my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name); my %mice = arch() =~ /^sparc/ ? ( 'sunmouse' => [ [ 'sunmouse' ], [ [ 3, 'sun', 'sun', N_("Sun - Mouse") ] ] ] ) : ( 'PS/2' => [ [ 'psaux' ], [ [ 2, 'ps/2', 'PS/2', N_("Standard") ], [ 5, 'ps/2', 'MouseManPlusPS/2', N_("Logitech MouseMan+") ], [ 5, 'imps2', 'IMPS/2', N_("Generic PS2 Wheel Mouse") ], [ 5, 'ps/2', 'GlidePointPS/2', N_("GlidePoint") ], '', [ 5, 'ps/2', 'ThinkingMousePS/2', N_("Kensington Thinking Mouse") ], [ 5, 'netmouse', 'NetMousePS/2', N_("Genius NetMouse") ], [ 5, 'netmouse', 'NetScrollPS/2', N_("Genius NetScroll") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], 'USB' => [ [ 'usbmouse' ], [ [ 1, 'ps/2', 'IMPS/2', N_("1 button") ], [ 2, 'ps/2', 'IMPS/2', N_("Generic 2 Button Mouse") ], [ 3, 'ps/2', 'IMPS/2', N_("Generic") ], [ 5, 'ps/2', 'IMPS/2', N_("Wheel") ], [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ], ] ], N_("serial") => [ [ map { "ttyS$_" } 0..3 ], [ [ 2, 'Microsoft', 'Microsoft', N_("Generic 2 Button Mouse") ], [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse") ], [ 5, 'ms3', 'IntelliMouse', N_("Microsoft IntelliMouse") ], [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan") ], [ 2, 'MouseSystems', 'MouseSystems', N_("Mouse Systems") ], '', [ 3, 'logim', 'MouseMan', N_("Logitech CC Series") ], [ 5, 'pnp', 'IntelliMouse', N_("Logitech MouseMan+/FirstMouse+") ], [ 5, 'ms3', 'IntelliMouse', N_("Genius NetMouse") ], [ 2, 'MMSeries', 'MMSeries', N_("MM Series") ], [ 2, 'MMHitTab', 'MMHittab', N_("MM HitTablet") ], [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type)") ], [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse") ], ] ], N_("busmouse") => [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ], [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', N_("1 button") ]), [ 2, 'Busmouse', 'BusMouse', N_("2 buttons") ], [ 3, 'Busmouse', 'BusMouse', N_("3 buttons") ], ] ], N_("none") => [ [ 'none' ], [ [ 0, 'none', 'Microsoft', N_("No mouse") ], ] ], ); sub xmouse2xId { #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h #- so that first mean "0", etc my @xmousetypes = ( "Microsoft", "MouseSystems", "MMSeries", "Logitech", "BusMouse", #MouseMan, "Logitech", "PS/2", "MMHittab", "GlidePoint", "IntelliMouse", "ThinkingMouse", "IMPS/2", "ThinkingMousePS/2", "MouseManPlusPS/2", "GlidePointPS/2", "NetMousePS/2", "NetScrollPS/2", "SysMouse", "Auto", "AceCad", "ExplorerPS/2", "USB", ); my ($id) = @_; $id = 'BusMouse' if $id eq 'MouseMan'; $id = 'IMPS/2' if $id eq 'ExplorerPS/2' && $::isInstall; eval { find_index { $_ eq $id } @xmousetypes } || 0; } my %mouse_btn_keymap = ( 0 => "NONE", 67 => "F9", 68 => "F10", 87 => "F11", 88 => "F12", 85 => "F13", 89 => "F14", 90 => "F15", 56 => "L-Option/Alt", 125 => "L-Command (Apple)", 98 => "Num: /", 55 => "Num: *", 117 => "Num: =", 96 => "Enter", ); sub ppc_one_button_keys { keys %mouse_btn_keymap } sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} } sub raw2mouse { my ($type, $raw) = @_; $raw or return; my %l; @l{@mouses_fields} = @$raw; +{ %l, type => $type }; } sub fullnames { map_each { my $type = $::a; grep { $_ } map { if ($_) { my $l = raw2mouse($type, $_); "$type|$l->{name}"; } else { $type .= "|[" . N("Other") . "]"; ''; } } @{$::b->[1]} } %mice; } sub fullname2mouse { my ($fname, %opts) = @_; my ($type, @l) = split '\|', $fname; my ($name) = pop @l; search: $opts{device} ||= $mice{$type}[0][0]; foreach (@{$mice{$type}[1]}) { my $l = raw2mouse($type, $_); $name eq $l->{name} and return { %$l, %opts }; } if ($name eq '1 Button' || $name eq '1 button') { $name = "Generic 2 Button Mouse"; goto search; } die "$fname not found ($type, $name)"; } sub serial_ports() { map { "ttyS$_" } 0..7 } sub serial_port2text { $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0]; } sub read { my %mouse = getVarsFromSh "$::prefix/etc/sysconfig/mouse"; eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) }; $mouse{nbuttons} ||= $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3; \%mouse; } sub write { my ($in, $mouse) = @_; local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-" local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3); local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3); setVarsInSh("$::prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device)); any::devfssymlinkf($mouse, 'mouse'); #- we should be using input/mice directly instead of usbmouse, but legacy... symlinkf 'input/mice', "$::prefix/dev/usbmouse" if $mouse->{device} eq "usbmouse"; any::devfssymlinkf($mouse->{auxmouse}, 'mouse1') if $mouse->{auxmouse}; various_xfree_conf($in, $mouse); if (arch() =~ /ppc/) { my $s = join('', "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n", if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"), if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"), ); substInFile { $_ = '' if /^\Qdev.mac_hid.mouse_button/; $_ .= $s if eof; } "$::prefix/etc/sysctl.conf"; } } sub mouseconfig { my ($t, $mouse, @wacom); #- Whouah! probing all devices from ttyS0 to ttyS3 once a time! detect_devices::probeSerialDevices(); #- check new probing methods keep everything used here intact! foreach (0..3) { $t = detect_devices::probeSerial("/dev/ttyS$_") or next; if ($t->{CLASS} eq 'MOUSE') { $t->{MFG} ||= $t->{MANUFACTURER}; $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001'; $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/; $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003'; $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default. $mouse->{device} = "ttyS$_"; last; } elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") { push @wacom, "ttyS$_"; } } $mouse, @wacom; } sub detect() { if (arch() =~ /^sparc/) { return fullname2mouse("sunmouse|Sun - Mouse"); } if (arch() eq "ppc") { return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? "USB|1 button" : # No need to search for an ADB mouse. If I did, the PPC kernel would # find one whether or not I had one installed! So.. default to it. "busmouse|1 button"); } my @wacom; my $fast_mouse_probe = sub { my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1); #- workaround for some special case were mouse is openable 1/2. unless ($auxmouse) { $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Generic PS2 Wheel Mouse", unsafe => 0); $auxmouse and detect_devices::hasMousePS2("psaux"); #- fake another open in order for XFree to see the mouse. } if (modules::get_probeall("usb-interface")) { if (my (@l) = detect_devices::usbMice()) { log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l; eval { modules::load(qw(hid mousedev usbmouse)) }; if (!$@ && detect_devices::tryOpen("usbmouse")) { my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Wheel"); $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic). return $mouse; } eval { modules::unload(qw(usbmouse mousedev hid)) }; } } else { log::l("no usb interface found for mice"); } $auxmouse; }; if (modules::get_probeall("usb-interface")) { my $keep_mouse; if (my (@l) = detect_devices::usbWacom()) { log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l; eval { modules::load("wacom", "evdev") }; unless ($@) { foreach (0..$#l) { detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_"; } } $keep_mouse or eval { modules::unload("evdev", "wacom") }; } } else { log::l("no usb interface found for wacom"); } #- at this level, not all possible mice are detected so avoid invoking serial_probe #- which takes a while for its probe. if ($::isStandalone) { my $mouse = $fast_mouse_probe->(); $mouse and return { wacom => \@wacom, %$mouse }; } #- probe serial device to make sure a wacom has been detected. eval { modules::load("serial") }; my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom; $r and return { wacom => \@wacom, %$r }; if (!$::isStandalone) { my $mouse = $fast_mouse_probe->(); $mouse and return { wacom => \@wacom, %$mouse }; } #- in case only a wacom has been found, assume an inexistant mouse (necessary). @wacom and return fullname2mouse('none|No mouse', wacom => \@wacom); if (detect_devices::is_a_recent_computer() && $::isInstall) { #- special case for non detected usb interface on a box with no mouse. #- we *must* find out if there really is no usb, otherwise the box may #- not be accessible via the keyboard (if the keyboard is USB) #- the only way to know this is to make a full pci probe modules::get_probeall("usb-interface") or modules::load_category('bus/usb', '', 'unsafe'); log::l("trying again to find a usb mouse"); sleep 10; if (my $mouse = $fast_mouse_probe->()) { return $mouse; } } #- defaults to generic serial mouse on ttyS0. #- Oops? using return let return a hash ref, if not using it, it return a list directly :-) return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1); } sub set_xfree_conf { my ($mouse, $xfree_conf, $keep_auxmouse_unchanged) = @_; my @mice = map { { Protocol => $_->{XMOUSETYPE}, Device => "/dev/$_->{device}", if_($_->{nbuttons} > 3, ZAxisMapping => [ $_->{nbuttons} > 5 ? '6 7' : '4 5' ]), if_($_->{nbuttons} < 3, Emulate3Buttons => undef, Emulate3Timeout => 50), }; } ($mouse, if_($mouse->{auxmouse}, $mouse->{auxmouse})); if (!$mouse->{auxmouse} && $keep_auxmouse_unchanged) { my (undef, @l) = $xfree_conf->get_mice; push @mice, @l; } $xfree_conf->set_mice(@mice); if (my @wacoms = @{$mouse->{wacom} || []}) { $xfree_conf->set_wacoms(map { { Device => "/dev/$_", USB => m|input/event| } } @wacoms); $xfree_conf->{xfree3}->add_load_module('xf86Wacom.so') if $xfree_conf->{xfree3}; } } sub various_xfree_conf { my ($in, $mouse) = @_; { my $f = "$::prefix/etc/X11/xinit.d/mouse_buttons"; if ($mouse->{nbuttons} <= 5) { unlink($f); } else { output_with_perm($f, 0755, "xmodmap -e 'pointer = 1 2 3 6 7 4 5'\n"); } } { my $f = "$::prefix/etc/X11/xinit.d/auxmouse_buttons"; if (!$mouse->{auxmouse} || $mouse->{auxmouse}{nbuttons} <= 5) { unlink($f); } else { $in->do_pkgs->install('xinput'); output_with_perm($f, 0755, "xinput set-button-map Mouse2 1 2 3 6 7 4 5\n"); } } } #- write_conf : write the mouse infos into the Xconfig files. #- input : #- $mouse : the hashtable containing the informations #- $mouse input #- $mouse->{nbuttons} : number of buttons : integer #- $mouse->{device} : device of the mouse : string : ex 'psaux' #- $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2' #- $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2' #- $mouse->{name} : name of the mouse : string : ex 'Standard' #- $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2" #- $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no' sub write_conf { my ($in, $mouse, $keep_auxmouse_unchanged) = @_; &write($in, $mouse); modules::write_conf('') if $mouse->{device} eq "usbmouse" && !$::testing; require Xconfig::xfree; my $xfree_conf = Xconfig::xfree->read; set_xfree_conf($mouse, $xfree_conf, $keep_auxmouse_unchanged); $xfree_conf->write; } sub test_mouse_install { my ($mouse, $x_protocol_changed) = @_; require ugtk2; ugtk2->import(qw(:wrappers :create)); my $w = ugtk2->new('', disallow_big_help => 1); my ($width, $height, $_offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25); my $darea = Gtk2::DrawingArea->new; $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized. gtkadd($w->{window}, gtkpack(my $vbox_grab = Gtk2::VBox->new(0, 0), gtkset_size_request($darea, $width+1, $height+1), gtkset_sensitive(create_okcancel($w, undef, undef, 'edge'), 1) ), ); test_mouse($mouse, $w, $darea, $width, $height, $x_protocol_changed); $w->sync; # HACK Gtk2::Gdk->pointer_grab($vbox_grab->window, 1, 'pointer_motion_mask', $vbox_grab->window, undef, 0); my $r = $w->main; Gtk2::Gdk->pointer_ungrab(0); $r; } sub test_mouse_standalone { my ($mouse, $hbox) = @_; require ugtk2; ugtk2->import(qw(:wrappers)); my ($width, $height, $_offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25); my $darea = Gtk2::DrawingArea->new; $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized. gtkpack($hbox, gtkpack(gtkset_border_width(Gtk2::VBox->new(0,10), 10), gtksize(gtkset_size_request($darea, $width+1, $height+1), $width, $height))); test_mouse($mouse, $hbox, $darea, $width, $height); } sub test_mouse { my ($mouse, $_w, $darea, $width, $height, $x_protocol_changed) = @_; # $darea->realize; IS IT REALLY NEEDED? generates a Gtk-CRITICAL when run.. require ugtk2; ugtk2->import(qw(:wrappers)); my %xpms; $xpms{$_} = ugtk2::gtkcreate_pixbuf("mouse_$_.xpm") foreach qw(3b 3b+ left right middle); $xpms{au} = ugtk2::gtkcreate_pixbuf('arrow_up.xpm'); $xpms{ad} = ugtk2::gtkcreate_pixbuf('arrow_down.xpm'); my $image = $xpms{'3b'}; $mouse->{nbuttons} > 3 and $image = $xpms{'3b+'}; my $draw_text = sub { my ($t, $y) = @_; my $layout = $darea->create_pango_layout($t); my ($w) = $layout->get_pixel_size; $darea->window->draw_layout($darea->style->black_gc, ($darea->allocation->width-$w)/2, ($darea->allocation->height-$height)/2 + $y, $layout); $layout->unref; }; my $draw_pixbuf = sub { my ($p, $x, $y, $w, $h) = @_; $p->render_to_drawable($darea->window, $darea->style->bg_gc('normal'), 0, 0, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, $w, $h, 'none', 0, 0); }; my $drawarea; $drawarea = sub { my ($height) = @_; $draw_pixbuf->($image, 0, 0, 210, $height || 200); if ($::isInstall) { $draw_text->(N("Please test the mouse"), $height - 120); if ($x_protocol_changed && $mouse->{nbuttons} > 3 && member($mouse->{XMOUSETYPE}, 'IMPS/2', 'ExplorerPS/2')) { $draw_text->(N("To activate the mouse,"), $height - 105); $draw_text->(N("MOVE YOUR WHEEL!"), $height - 90); } } }; my $timeout; my $paintButton = sub { my ($nb) = @_; my $x = 60 + $nb*33; $timeout or $drawarea->(); if ($nb == 0) { $draw_pixbuf->($xpms{left}, 31, 52, 59, 91); } elsif ($nb == 2) { $draw_pixbuf->($xpms{right}, 117, 52, 61, 91); } elsif ($nb == 1) { if ($mouse->{nbuttons} > 3) { $draw_pixbuf->($xpms{middle}, 98, 67, 13, 62); } else { $darea->window->draw_arc($darea->style->black_gc, 1, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + 90, 20, 25, 0, 360*64); } } else { if ($nb == 3) { $draw_pixbuf->($xpms{au}, 102, 57, 6, 8); } elsif ($nb == 4) { $draw_pixbuf->($xpms{ad}, 102, 131, 6, 8); } $draw_pixbuf->($xpms{middle}, 98, 67, 13, 62); $timeout and Gtk2->timeout_remove($timeout); $timeout = Gtk2->timeout_add(100, sub { $drawarea->(); $timeout = 0; 0 }); } }; $darea->signal_connect(button_press_event => sub { $paintButton->($_[1]->button - 1) }); $darea->signal_connect(scroll_event => sub { $paintButton->($_[1]->direction eq 'up' ? 3 : 4) }); $darea->signal_connect(button_release_event => sub { $drawarea->() }); $darea->signal_connect(expose_event => sub { $drawarea->(350) }); $darea->set_size_request($width, $height); } =begin =head1 NAME mouse - Perl functions to handle mice =head1 SYNOPSYS require modules; require mouse; modules::mergein_conf('/etc/modules.conf') if -r '/etc/modules.conf'; &mouse::detect(); =head1 DESCRIPTION C is a perl module used by mousedrake to detect and configure the mouse. =head1 COPYRIGHT Copyright (C) 2000-2002 MandrakeSoft This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. =cut 6' href='#n366'>366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 
package any; # $Id$

use diagnostics;
use strict;

#-######################################################################################
#- misc imports
#-######################################################################################
use common;
use detect_devices;
use partition_table;
use fs::type;
use lang;
use run_program;
use keyboard;
use devices;
use modules;
use log;
use fs;
use c;

sub facesdir() {
    "$::prefix/usr/share/mdk/faces/";
}
sub face2png {
    my ($face) = @_;
    facesdir() . $face . ".png";
}
sub facesnames() {
    my $dir = facesdir();
    my @l = grep { /^[A-Z]/ } all($dir);
    map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
}

sub addKdmIcon {
    my ($user, $icon) = @_;
    my $dest = "$::prefix/usr/share/faces/$user.png";
    eval { cp_af(facesdir() . $icon . ".png", $dest) } if $icon;
}

sub alloc_user_faces {
    my ($users) = @_;
    my @m = my @l = facesnames();
    foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
	$_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
	log::l("auto_icon is $_->{auto_icon}");
	@m = @l unless @m;
    }
}

sub create_user {
    my ($u, $isMD5) = @_;

    my @existing = stat("$::prefix/home/$u->{name}");

    if (!getpwnam($u->{name})) {
	my $uid = $u->{uid} || $existing[4];
	if ($uid && getpwuid($uid)) {
	    undef $uid; #- suggested uid already in use
	}
	my $gid = $u->{gid} || $existing[5] || int getgrnam($u->{name});
	if ($gid) {
	    if (getgrgid($gid)) {
		undef $gid if getgrgid($gid) ne $u->{name};
	    } else {
		run_program::rooted($::prefix, 'groupadd', '-g', $gid, $u->{name});
	    }
	}
	require authentication;
	run_program::raw({ root => $::prefix, sensitive_arguments => 1 },
			    'adduser', 
			    '-p', authentication::user_crypted_passwd($u, $isMD5),
			    if_($uid, '-u', $uid), if_($gid, '-g', $gid), 
			    if_($u->{realname}, '-c', $u->{realname}),
			    if_($u->{home}, '-d', $u->{home}),
			    if_($u->{shell}, '-s', $u->{shell}), 
			    $u->{name});
    }

    my (undef, undef, $uid, $gid, undef, undef, undef, $home) = getpwnam($u->{name});

    if (@existing && $::isInstall && ($uid != $existing[4] || $gid != $existing[5])) {
	log::l("chown'ing $home from $existing[4].$existing[5] to $uid.$gid");
	require commands;
	eval { commands::chown_("-r", "$uid.$gid", "$::prefix$home") };
    }
}

sub add_users {
    my ($users, $authentication) = @_;

    alloc_user_faces($users);

    foreach (@$users) {
	create_user($_, $authentication->{md5});
	run_program::rooted($::prefix, "usermod", "-G", join(",", @{$_->{groups}}), $_->{name}) if !is_empty_array_ref($_->{groups});
	addKdmIcon($_->{name}, delete $_->{auto_icon} || $_->{icon});
    }
}

sub hdInstallPath() {
    my $tail = first(readlink("/tmp/image") =~ m|^(?:/tmp/)?hdimage/*(.*)|);
    my $head = first(readlink("/tmp/hdimage") =~ m|$::prefix(.*)|);
    log::l("search HD install path, tail=$tail, head=$head, tail defined=" . to_bool(defined $tail));
    defined $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
}

sub install_acpi_pkgs {
    my ($do_pkgs, $b) = @_;

    my $acpi = bootloader::get_append_with_key($b, 'acpi');
    if (!member($acpi, 'off', 'ht')) {
	$do_pkgs->install('acpi', 'acpid') if !(-x "$::prefix/usr/bin/acpi" && -x "$::prefix/usr/sbin/acpid");
    }
}

sub setupBootloader {
    my ($in, $b, $all_hds, $fstab, $security) = @_;

    require bootloader;
  general:
    {
	local $::Wizard_no_previous = 1 if $::isStandalone;
	setupBootloader__general($in, $b, $all_hds, $fstab, $security) or return 0;
    }
    setupBootloader__boot_bios_drive($in, $b, $all_hds->{hds}) or goto general;
    {
	local $::Wizard_finished = 1 if $::isStandalone;
	setupBootloader__entries($in, $b, $all_hds, $fstab) or goto general;
    }
    1;
}

sub installBootloader {
    my ($in, $b, $all_hds) = @_;
    return if is_xbox();
    install_acpi_pkgs($in->do_pkgs, $b);

    eval { run_program::rooted($::prefix, 'echo | lilo -u') } if $::isInstall && !$::o->{isUpgrade} && -e "$::prefix/etc/lilo.conf" && glob("$::prefix/boot/boot.*");

  retry:
    eval { 
	my $_w = $in->wait_message(N("Please wait"), N("Bootloader installation in progress"));
	bootloader::install($b, $all_hds);
    };

    if (my $err = $@) {
	$err =~ /wizcancel/ and return;
	$err =~ s/^\w+ failed// or die;
	$err = formatError($err);
	while ($err =~ s/^Warning:.*//m) {}
	if (my ($dev) = $err =~ /^Reference:\s+disk\s+"(.*?)".*^Is the above disk an NT boot disk?/ms) {
	    if ($in->ask_yesorno('',
formatAlaTeX(N("LILO wants to assign a new Volume ID to drive %s.  However, changing
the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.
This caution does not apply to Windows 95 or 98, or to NT data disks.

Assign a new Volume ID?", $dev)))) {
		$b->{force_lilo_answer} = 'n';
	    } else {
		$b->{'static-bios-codes'} = 1;
	    }
	    goto retry;
	} else {
	    $in->ask_warn('', [ N("Installation of bootloader failed. The following error occurred:"), $err ]);
	    return;
	}
    } elsif (arch() =~ /ppc/) {
	if (detect_devices::get_mac_model() !~ /IBM/) {
            my $of_boot = bootloader::dev2yaboot($b->{boot});
	    $in->ask_warn('', N("You may need to change your Open Firmware boot-device to\n enable the bootloader.  If you do not see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
	}
    }
    1;
}


sub setupBootloader_simple {
    my ($in, $b, $all_hds, $fstab, $security) = @_;
    my $hds = $all_hds->{hds};

    require bootloader;
    my $mixed_kind_of_disks = bootloader::mixed_kind_of_disks($hds);
    #- full expert questions when there is 2 kind of disks
    #- it would need a semi_auto asking on which drive the bios boots...

    $mixed_kind_of_disks || $b->{bootUnsafe} || arch() =~ /ppc/ or return 1; #- default is good enough
    
    if (!$mixed_kind_of_disks && arch() !~ /ia64/) {
	setupBootloader__mbr_or_not($in, $b, $hds, $fstab) or return 0;
    } else {
      general:
	setupBootloader__general($in, $b, $all_hds, $fstab, $security) or return 0;
    }
    setupBootloader__boot_bios_drive($in, $b, $hds) or goto general;
    1;
}


sub setupBootloader__boot_bios_drive {
    my ($in, $b, $hds) = @_;

    bootloader::mixed_kind_of_disks($hds) && 
      $b->{boot} =~ /\d$/ && #- on a partition
	is_empty_hash_ref($b->{bios}) && #- some bios mapping already there
	  arch() !~ /ppc/ or return 1;

    log::l("mixed_kind_of_disks");
    my $hd = $in->ask_from_listf('', N("You decided to install the bootloader on a partition.
This implies you already have a bootloader on the hard drive you boot (eg: System Commander).

On which drive are you booting?"), \&partition_table::description, $hds) or return 0;
    log::l("mixed_kind_of_disks chosen $hd->{device}");
    $b->{first_hd_device} = "/dev/$hd->{device}";
    1;
}

sub setupBootloader__mbr_or_not {
    my ($in, $b, $hds, $fstab) = @_;

    if (arch() =~ /ppc/) {
	if (defined $partition_table::mac::bootstrap_part) {
	    $b->{boot} = $partition_table::mac::bootstrap_part;
	    log::l("set bootstrap to $b->{boot}"); 
	} else {
	    die "no bootstrap partition - yaboot.conf creation failed";
	}
    } else {
	my $floppy = detect_devices::floppy();

	my @l = (
		 [ N("First sector of drive (MBR)") => '/dev/' . $hds->[0]{device} ],
		 [ N("First sector of the root partition") => '/dev/' . fs::get::root($fstab, 'boot')->{device} ],
		     if_($floppy, 
                 [ N("On Floppy") => "/dev/$floppy" ],
		     ),
		 [ N("Skip") => '' ],
		);

	my $default = find { $_->[1] eq $b->{boot} } @l;
	$in->ask_from_({ title => N("LILO/grub Installation"),
			 messages => N("Where do you want to install the bootloader?"),
			 interactive_help_id => 'setupBootloaderBeginner',
		       },
		      [ { val => \$default, list => \@l, format => sub { $_[0][0] }, type => 'list' } ]);
	my $new_boot = $default->[1] or return;

	#- remove bios mapping if the user changed the boot device
	delete $b->{bios} if $new_boot ne $b->{boot};
	$b->{boot} = $new_boot;
    }
    1;
}

sub setupBootloader__general {
    my ($in, $b, $all_hds, $fstab, $security) = @_;

    return if is_xbox();
    my @method_choices = bootloader::method_choices($fstab);
    my $prev_force_acpi = my $force_acpi = bootloader::get_append_with_key($b, 'acpi') !~ /off|ht/;
    my $prev_force_noapic = my $force_noapic = bootloader::get_append_simple($b, 'noapic');
    my $prev_force_nolapic = my $force_nolapic = bootloader::get_append_simple($b, 'nolapic');
    my $memsize = bootloader::get_append_memsize($b);
    my $prev_clean_tmp = my $clean_tmp = any { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
    my $prev_boot = $b->{boot};

    $b->{password2} ||= $b->{password} ||= '';
    $::Wizard_title = N("Boot Style Configuration");
    if (arch() !~ /ppc/) {
	$in->ask_from_({ messages => N("Bootloader main options"),
			 interactive_help_id => 'setupBootloader',
			 callbacks => {
			     complete => sub {
				 !$memsize || $memsize =~ /^\d+K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', N("Give the ram size in MB")), return 1;
				 #- $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', N("At this level of security, a password (and a good one) in lilo is requested")), return 1;
				 $b->{restricted} && !$b->{password} and $in->ask_warn('', N("Option ``Restrict command line options'' is of no use without a password")), return 1;
				 $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ N("The passwords do not match"), N("Please try again") ]), return 1;
				 0;
			     },
			 },
		       }, [
            { label => N("Bootloader to use"), val => \$b->{method}, list => \@method_choices, format => \&bootloader::method2text },
                if_(arch() !~ /ia64/,
            { label => N("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_->{device}" } bootloader::allowed_boot_parts($b, $all_hds) ], not_edit => !$::expert },
		),
            { label => N("Delay before booting default image"), val => \$b->{timeout} },
            { text => N("Enable ACPI"), val => \$force_acpi, type => 'bool' },
		if_(!$force_nolapic,
            { text => N("Force no APIC"), val => \$force_noapic, type => 'bool' }, 
	        ),
            { text => N("Force No Local APIC"), val => \$force_nolapic, type => 'bool' },
		if_($security >= 4 || $b->{password} || $b->{restricted},
            { label => N("Password"), val => \$b->{password}, hidden => 1 },
            { label => N("Password (again)"), val => \$b->{password2}, hidden => 1 },
            { text => N("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => N("restrict") },
		),
            { text => N("Clean /tmp at each boot"), val => \$clean_tmp, type => 'bool', advanced => 1 },
            { label => N("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
        ]) or return 0;
    } else {
	$b->{boot} = $partition_table::mac::bootstrap_part;	
	$in->ask_from_({ messages => N("Bootloader main options"),
			 interactive_help_id => 'setupYabootGeneral',
		       }, [
            { label => N("Bootloader to use"), val => \$b->{method}, list => \@method_choices, format => \&bootloader::method2text },
            { label => N("Init Message"), val => \$b->{'init-message'} },
            { label => N("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab)) ], not_edit => !$::expert },
            { label => N("Open Firmware Delay"), val => \$b->{delay} },
            { label => N("Kernel Boot Timeout"), val => \$b->{timeout} },
            { label => N("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
            { label => N("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
            { label => N("Default OS?"), val => \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
        ]) or return 0;				
    }

    #- remove bios mapping if the user changed the boot device
    delete $b->{bios} if $b->{boot} ne $prev_boot;

    if ($b->{boot} =~ m!/dev/md\d+$!) {
	$b->{'raid-extra-boot'} = 'mbr';
    } else {
	delete $b->{'raid-extra-boot'} if $b->{'raid-extra-boot'} eq 'mbr';
    }

    if ($b->{method} eq 'grub') {
	$in->do_pkgs->ensure_binary_is_installed('grub', "grub", 1) or return 0;
    }

    bootloader::set_append_memsize($b, $memsize);
    if ($prev_force_acpi != $force_acpi) {
	bootloader::set_append_with_key($b, acpi => ($force_acpi ? '' : 'ht'));
    }
    if ($prev_force_noapic != $force_noapic) {
	($force_noapic ? \&bootloader::set_append_simple : \&bootloader::remove_append_simple)->($b, 'noapic');
    }
    if ($prev_force_nolapic != $force_nolapic) {
	($force_nolapic ? \&bootloader::set_append_simple : \&bootloader::remove_append_simple)->($b, 'nolapic');
    }

    if ($prev_clean_tmp != $clean_tmp) {
	if ($clean_tmp && !fs::get::has_mntpoint('/tmp', $all_hds)) {
	    push @{$all_hds->{special}}, { device => 'none', mntpoint => '/tmp', fs_type => 'tmpfs' };
	} else {
	    @{$all_hds->{special}} = grep { $_->{mntpoint} ne '/tmp' } @{$all_hds->{special}};
	}
    }
    1;
}

sub setupBootloader__entries {
    my ($in, $b, $_all_hds, $fstab) = @_;

    require Xconfig::resolution_and_depth;

    my $Modify = sub {
	require network::netconnect; #- to list network profiles
	my ($e) = @_;
	my $default = my $old_default = $e->{label} eq $b->{default};
	my $vga = Xconfig::resolution_and_depth::from_bios($e->{vga});
	my ($append, $netprofile) = bootloader::get_append_netprofile($e);

	my @l;
	if ($e->{type} eq "image") { 
	    @l = (
{ label => N("Image"), val => \$e->{kernel_or_dev}, list => [ map { "/boot/$_" } bootloader::installed_vmlinuz() ], not_edit => 0 },
{ label => N("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
{ label => N("Append"), val => \$append },
  if_(arch() !~ /ppc|ia64/,
{ label => N("Video mode"), val => \$vga, list => [ '', Xconfig::resolution_and_depth::bios_vga_modes() ], format => \&Xconfig::resolution_and_depth::to_string, advanced => 1 },
),
{ label => N("Initrd"), val => \$e->{initrd}, list => [ map { if_(/^initrd/, "/boot/$_") } all("$::prefix/boot") ], not_edit => 0, advanced => 1 },
{ label => N("Network profile"), val => \$netprofile, list => [ sort(uniq('', $netprofile, network::netconnect::get_profiles())) ], advanced => 1 },
	    );
	} else {
	    @l = ( 
{ label => N("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab, detect_devices::floppies() ], not_edit => !$::expert },
	    );
	}
	if (arch() !~ /ppc/) {
	    @l = (
		  { label => N("Label"), val => \$e->{label} },
		  @l,
		  { text => N("Default"), val => \$default, type => 'bool' },
		 );
	} else {
	    unshift @l, { label => N("Label"), val => \$e->{label}, list => ['macos', 'macosx', 'darwin'] };
	    if ($e->{type} eq "image") {
		@l = ({ label => N("Label"), val => \$e->{label} },
		$::expert ? @l[1..4] : (@l[1..2], { label => N("Append"), val => \$append }),
		if_($::expert, { label => N("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
		if_($::expert, $l[5]),
		{ label => N("NoVideo"), val => \$e->{novideo}, type => 'bool' },
		{ text => N("Default"), val => \$default, type => 'bool' }
		);
	    }
	}

	$in->ask_from_(
	    {
	     interactive_help_id => arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry',
	     callbacks => {
	       complete => sub {
		   $e->{label} or $in->ask_warn('', N("Empty label not allowed")), return 1;
		   $e->{kernel_or_dev} or $in->ask_warn('', $e->{type} eq 'image' ? N("You must specify a kernel image") : N("You must specify a root partition")), return 1;
		   member(lc $e->{label}, map { lc $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', N("This label is already used")), return 1;
		   0;
	       } } }, \@l) or return;

	$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
	$e->{vga} = ref($vga) ? $vga->{bios} : $vga;
	bootloader::set_append_netprofile($e, $append, $netprofile);
	bootloader::configure_entry($e); #- hack to make sure initrd file are built.
	1;
    };

    my $Add = sub {
	my @labels = map { $_->{label} } @{$b->{entries}};
	my ($e, $prefix);
	if ($in->ask_from_list_('', N("Which type of entry do you want to add?"),
				[ N_("Linux"), arch() =~ /sparc/ ? N_("Other OS (SunOS...)") : arch() =~ /ppc/ ? 
				  N_("Other OS (MacOS...)") : N_("Other OS (Windows...)") ]
			       ) eq "Linux") {
	    $e = { type => 'image',
		   root => '/dev/' . fs::get::root($fstab)->{device}, #- assume a good default.
		 };
	    $prefix = "linux";
	} else {
	    $e = { type => 'other' };
	    $prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";
	}
	$e->{label} = $prefix;
	for (my $nb = 0; member($e->{label}, @labels); $nb++) {
	    $e->{label} = "$prefix-$nb";
	}
	$Modify->($e) or return;
	bootloader::add_entry($b, $e);
	$e;
    };

    my $Remove = sub {
	my ($e) = @_;
	delete $b->{default} if $b->{default} eq $e->{label};
	@{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
	1;
    };

    my @prev_entries = @{$b->{entries}};
    if ($in->ask_from__add_modify_remove('',
N("Here are the entries on your boot menu so far.
You can create additional entries or change the existing ones."), [ { 
        format => sub {
	    my ($e) = @_;
	    ref($e) ? 
	      "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && "  *") : 
		translate($e);
	}, list => $b->{entries},
    } ], Add => $Add, Modify => $Modify, Remove => $Remove)) {
	1;
    } else {
	@{$b->{entries}} = @prev_entries;
	'';
    }
}

sub get_autologin() {
    my %desktop = getVarsFromSh("$::prefix/etc/sysconfig/desktop");
    my $desktop = $desktop{DESKTOP} || 'KDE';
    my $autologin = do {
	if (($desktop{DISPLAYMANAGER} || $desktop) eq 'GNOME') {
	    my %conf = read_gnomekderc("$::prefix/etc/X11/gdm/gdm.conf", 'daemon');
	    text2bool($conf{AutomaticLoginEnable}) && $conf{AutomaticLogin};
	} else { # KDM / MdkKDM
	    my %conf = read_gnomekderc("$::prefix/usr/share/config/kdm/kdmrc", 'X-:0-Core');
	    text2bool($conf{AutoLoginEnable}) && $conf{AutoLoginUser};
	}
    };
    { autologin => $autologin, desktop => $desktop };
}

sub set_autologin {
    my ($o_user, $o_wm) = @_;
    log::l("set_autologin $o_user $o_wm");
    my $autologin = bool2text($o_user);

    #- Configure KDM / MDKKDM
    eval { update_gnomekderc("$::prefix/usr/share/config/kdm/kdmrc", 'X-:0-Core' => (
	AutoLoginEnable => $autologin,
	AutoLoginUser => $o_user,
    )) };

    #- Configure GDM
    eval { update_gnomekderc("$::prefix/etc/X11/gdm/gdm.conf", daemon => (
	AutomaticLoginEnable => $autologin,
	AutomaticLogin => $o_user,
    )) };
  
    my $xdm_autologin_cfg = "$::prefix/etc/sysconfig/autologin";
    if (member($o_wm, 'KDE', 'GNOME')) {
	unlink $xdm_autologin_cfg;
    } else {
	setVarsInShMode($xdm_autologin_cfg, 0644,
			{ USER => $o_user, AUTOLOGIN => bool2yesno($o_user), EXEC => '/usr/X11R6/bin/startx.autologin' });
    }

    if ($o_user) {
	my $home = (getpwnam($o_user))[7];
	set_window_manager($home, $o_wm);
    }
}
sub set_window_manager {
    my ($home, $wm) = @_;
    log::l("set_window_manager $home $wm");
    my $p_home = "$::prefix$home";

    #- for KDM/GDM
    my $wm_number = sessions_with_order()->{$wm} || '';
    update_gnomekderc("$p_home/.dmrc", 'Desktop', Session => "$wm_number$wm");
    my $user = find { $home eq $_->[7] } list_passwd();
    chown($user->[2], $user->[3], "$p_home/.dmrc");

    #- for startx/autologin
    {
	my %l = getVarsFromSh("$p_home/.desktop");
	$l{DESKTOP} = $wm;
	setVarsInSh("$p_home/.desktop", \%l);
    }
}

sub rotate_log {
    my ($f) = @_;
    if (-e $f) {
	my $i = 1;
	for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
	rename $f, "$f$i";
    }
}
sub rotate_logs {
    my ($prefix) = @_;
    rotate_log("$prefix/root/drakx/$_") foreach qw(ddebug.log install.log);
}

sub writeandclean_ldsoconf {
    my ($prefix) = @_;
    my $file = "$prefix/etc/ld.so.conf";
    my @l = chomp_(cat_($file));

    my @default = ('/lib', '/usr/lib'); #- no need to have /lib and /usr/lib in ld.so.conf
    my @suggest = ('/usr/X11R6/lib', '/usr/lib/qt3/lib'); #- needed for upgrade where package renaming can cause this to disappear

    if (arch() =~ /x86_64/) {
	push @default, map { $_, $_ . '64' } @default;
	push @suggest, map { $_, $_ . '64' } @suggest;
    }
    push @l, grep { -d "$::prefix$_" } @suggest;
    @l = difference2(\@l, \@default);

    output($file, map { "$_\n" } uniq(@l));
}

sub shells() {
    grep { -x "$::prefix$_" } chomp_(cat_("$::prefix/etc/shells"));
}

sub inspect {
    my ($part, $o_prefix, $b_rw) = @_;

    isMountableRW($part) || !$b_rw && isOtherAvailableFS($part) or return;

    my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";

    if ($part->{isMounted}) {
	$dir = ($o_prefix || '') . $part->{mntpoint};
    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
	$dir = '';
    } else {
	mkdir $dir, 0700;
	eval { fs::mount(devices::make($part->{device}), $dir, $part->{fs_type}, !$b_rw) };
	$@ and return;
    }
    my $h = before_leaving {
	if (!$part->{isMounted} && $dir) {
	    fs::umount($dir);
	    unlink($dir);
	}
    };
    $h->{dir} = $dir;
    $h;
}

sub ask_user_one {
    my ($in, $users, $security, $u, %options) = @_;

    my @icons = facesnames();

    my %high_security_groups = (
        xgrp => N("access to X programs"),
	rpm => N("access to rpm tools"),
	wheel => N("allow \"su\""),
	adm => N("access to administrative files"),
	ntools => N("access to network tools"),
	ctools => N("access to compilation tools"),
    );

    $u->{password2} ||= $u->{password} ||= '';
    $u->{shell} ||= '/bin/bash';
    my $names = @$users ? N("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
    
    my %groups;
    my $verif = sub {
        $u->{password} eq $u->{password2} or $in->ask_warn('', [ N("The passwords do not match"), N("Please try again") ]), return 1,2;
        $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', N("This password is too simple")), return 1,2;
	    $u->{name} or $in->ask_warn('', N("Please give a user name")), return 1,0;
        $u->{name} =~ /^[a-z]+?[a-z0-9_-]*?$/ or $in->ask_warn('', N("The user name must contain only lower cased letters, numbers, `-' and `_'")), return 1,0;
        length($u->{name}) <= 32 or $in->ask_warn('', N("The user name is too long")), return 1,0;
        member($u->{name}, 'root', map { $_->{name} } @$users) and $in->ask_warn('', N("This user name has already been added")), return 1,0;
        return 0;
    };
    my $ret = $in->ask_from_(
        { title => N("Add user"),
          messages => N("Enter a user\n%s", $options{additional_msg} || $names),
          interactive_help_id => 'addUser',
          focus_first => 1,
          if_(!$::isInstall, ok => N("Done")),
          cancel => $options{noaccept} ? '' : N("Accept user"),
          callbacks => {
	          focus_out => sub {
		      if ($_[0] eq '0') {
			  $u->{name} ||= lc first($u->{realname} =~ /([a-zA-Z0-9_-]+)/);
		      }
		  },
	          complete => sub { $u->{name} ? &$verif : 0 },
                  canceled => $verif,
                  ok_disabled => sub { $security >= 4 && !@$users || $options{needauser} && !$u->{name} },
	  } }, [ 
	  { label => N("Real name"), val => \$u->{realname} },
          { label => N("Login name"), val => \$u->{name} },
          { label => N("Password"),val => \$u->{password}, hidden => 1 },
          { label => N("Password (again)"), val => \$u->{password2}, hidden => 1 },
          { label => N("Shell"), val => \$u->{shell}, list => [ shells() ], not_edit => !$::expert, advanced => 1 },
	    if_($security <= 3 && !$options{noicons} && @icons,
	  { label => N("Icon"), val => \ ($u->{icon} ||= 'default'), list => \@icons, icon2f => \&face2png, format => \&translate },
	    ),
	    if_($security > 3,
                map {
                    { label => $_, val => \$groups{$_}, text => $high_security_groups{$_}, type => 'bool' };
                } keys %high_security_groups,
               ),
               ],
                            );
    $u->{groups} = [ grep { $groups{$_} } keys %groups ];

    push @$users, $u if $u->{name};

    return $ret;
}

sub ask_users {
    my ($in, $users, $security, $suggested_names) = @_;

    while (1) {
	my $u = {};
	$u->{name} = shift @$suggested_names;
        ask_user_one($in, $users, $security, $u) and return;
    }
}

sub sessions() {
    split(' ', run_program::rooted_get_stdout($::prefix, '/usr/sbin/chksession', '-l'));
}
sub sessions_with_order() {
    my %h = map { /(.*)=(.*)/ } split(' ', run_program::rooted_get_stdout($::prefix, '/usr/sbin/chksession', '-L'));
    \%h;
}

sub autologin {
    my ($o, $in) = @_;

    my @wm = sessions();
    my @users = map { $_->{name} } @{$o->{users} || []};

    if (member('KDE', @wm) && @users == 1 && $o->{meta_class} eq 'desktop') {
	$o->{desktop} = 'KDE';
	$o->{autologin} = $users[0];
    } elsif (@wm > 1 && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
	my $use_autologin = @users == 1;

	$in->ask_from_(
		       { title => N("Autologin"),
			 messages => N("I can set up your computer to automatically log on one user.") },
		       [ { label => N("Do you want to use this feature?"), val => \$use_autologin, type => 'bool' },
			 { label => N("Choose the default user:"), val => \$o->{autologin}, list => \@users, disabled => sub { !$use_autologin } },
			 { label => N("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm, disabled => sub { !$use_autologin } } ]
		      );
	delete $o->{autologin} if !$use_autologin;
    } else {
	delete $o->{autologin};
    }
}


sub selectLanguage {
    my ($in, $lang, $o_langs_) = @_;

    my $common = { messages => N("Please choose a language to use."),
		   title => N("Language choice"),
		   interactive_help_id => 'selectLanguage' };

    if ($::isInstall) {
	my $langs = $o_langs_ || {};
	my $using_images = $in->isa('interactive::gtk') && !$in->{vga16};
	
	my %name2l = map { lang::l2name($_) => $_ } lang::list_langs();
	my $listval2val = sub { $_[0] =~ /\|(.*)/ ? $1 : $_[0] };

	#- since gtk version will use images (function image2f) we need to sort differently
	my $sort_func = $using_images ? \&lang::l2transliterated : \&lang::l2name;
	my @langs = sort { $sort_func->($a) cmp $sort_func->($b) } lang::list_langs();
	if (@langs > 15) {
	    my $add_location = sub {
		my ($l) = @_;
		map { "$_|$l" } lang::l2location($l);
	    };
	    @langs = map { $add_location->($_) } @langs;

	    #- to create the default value, use the first location for that value :/
	    $lang = first($add_location->($lang));
	}

        my $last_utf8 = $in->{locale}{utf8};
	add2hash($common, { cancel => '',
			    advanced_messages => formatAlaTeX(N("Mandrakelinux can support multiple languages. Select
the languages you would like to install. They will be available
when your installation is complete and you restart your system.")),
			    advanced_state => 1,
			    callbacks => { advanced => sub { $langs->{$listval2val->($lang)} = 1 },
                                           changed => sub {
                                               if ($last_utf8 == $in->{locale}{utf8}) {
                                                   $last_utf8 = $in->{locale}{utf8} = lang::utf8_should_be_needed({ lang => $listval2val->($lang), langs => $langs });
                                               } else {
                                                   $last_utf8 = -1;  #- disable auto utf8 once touched
                                               }
                                           } } });
			    
	$in->ask_from_($common,
	[ { val => \$lang, separator => '|', 
	    if_($using_images, image2f => sub { $name2l{$_[0]} =~ /^[a-z]/ ? ('', "langs/lang-$name2l{$_[0]}") : $_[0] }),
	    format => sub { $_[0] =~ /(.*\|)(.*)/ ? $1 . lang::l2name($2) : lang::l2name($_[0]) },
	    list => \@langs, sort => 0 },
	    if_($o_langs_ && !$::move,
                { val => \$in->{locale}{utf8}, type => 'bool', text => N("Use Unicode by default"), advanced => 1 },
		{ val => \$langs->{all}, type => 'bool', text => N("All languages"), advanced => 1 },
	        map {
		  { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
		    text => $_->[1], advanced => 1,
		    image => "langs/lang-$_->[0]",
		  }; 
	      } sort { $a->[1] cmp $b->[1] } map { [ $_, $sort_func->($_) ] } lang::list_langs())
	]) or return;
	$langs->{$listval2val->($lang)} = 1;
	$langs->{$_} or delete $langs->{$_} foreach keys %$langs;  #- clean hash
	
	#- convert to the default locale for asked language
	$listval2val->($lang);

    } else {
	my @langs = sort { lang::l2name($a) cmp lang::l2name($b) } lang::list_langs(exclude_non_installed => 1);
	die 'one lang only' if @langs == 1;
	$in->ask_from_($common,
		       [ { val => \$lang, type => 'list',
                     format => sub { lang::l2name($_[0]) }, list => \@langs },
                   { val => \$in->{locale}{utf8}, type => 'bool', text => N("Use Unicode by default"), advanced => 1 },
               ]) or return;
	$lang;
    }
}

sub selectCountry {
    my ($in, $locale) = @_;

    my $country = $locale->{country};
    my @countries = lang::list_countries(exclude_non_installed => !$::isInstall);
    my @best = uniq map {
	my $h = lang::analyse_locale_name($_);
	if_($h->{main} eq lang::locale_to_main_locale($locale->{lang}) && $h->{country},
	    $h->{country});
    } @lang::locales;
    @best == 1 and @best = ();

    my ($other, $ext_country);
    member($country, @best) or ($ext_country, $country) = ($country, $ext_country);
    $in->ask_from_(
		  { title => N("Country / Region"), 
		    messages => N("Please choose your country."),
		    interactive_help_id => 'selectCountry',
		    advanced_messages => N("Here is the full list of available countries"),
		    advanced_label => N("Other Countries"),
		    advanced_state => $ext_country && scalar(@best),
		    callbacks => { changed => sub { $_[0] != 2 and $other = $_[0] == 1 } },
		  },
		  [ if_(@best, { val => \$country, type => 'list', format => \&lang::c2name,
				 list => \@best, sort => 1 }),
		    { val => \$ext_country, type => 'list', format => \&lang::c2name,
		      list => [ @countries ], advanced => scalar(@best) },
		    { val => \$locale->{IM}, type => 'combo', label => N("Input method:"), sort => 0, 
		      list => [ N_("None"), sort(lang::get_ims()) ], format => sub { uc(translate($_[0])) },
                advanced => !$locale->{IM} || $locale->{IM} eq 'None',
              },
		  ]) or return;

    $locale->{country} = $other || !@best ? $ext_country : $country;
}

sub set_login_serial_console {
    my ($port, $speed) = @_;

    my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
    substInFile { s/^s$port:.*//; $_ = $line if eof } "$::prefix/etc/inittab";
}

sub report_bug {
    my (@other) = @_;

    sub header { "
********************************************************************************
* $_[0]
********************************************************************************";
    }

    join '', map { chomp; "$_\n" }
      header("lspci"), detect_devices::stringlist(),
      header("pci_devices"), cat_("/proc/bus/pci/devices"),
      header("dmidecode"), `$ENV{LD_LOADER} dmidecode`,
      header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
      header("scsi"), cat_("/proc/scsi/scsi"),
      header("/sys/bus/scsi/devices"), `ls -l /sys/bus/scsi/devices`,
      header("lsmod"), cat_("/proc/modules"),
      header("cmdline"), cat_("/proc/cmdline"),
      header("pcmcia: stab"), cat_("$::prefix/var/lib/pcmcia/stab") || cat_("$::prefix/var/run/stab"),
      header("usb"), cat_("/proc/bus/usb/devices"),
      header("partitions"), cat_("/proc/partitions"),
      header("cpuinfo"), cat_("/proc/cpuinfo"),
      header("syslog"), cat_("/tmp/syslog") || cat_("$::prefix/var/log/syslog"),
      header("monitor_full_edid"), monitor_full_edid(),
      header("stage1.log"), cat_("/tmp/stage1.log") || cat_("$::prefix/root/drakx/stage1.log"),
      header("ddebug.log"), cat_("/tmp/ddebug.log") || cat_("$::prefix/root/drakx/ddebug.log"),
      header("install.log"), cat_("$::prefix/root/drakx/install.log"),
      header("fstab"), cat_("$::prefix/etc/fstab"),
      header("modules.conf"), cat_("$::prefix/etc/modules.conf"),
      header("lilo.conf"), cat_("$::prefix/etc/lilo.conf"),
      header("menu.lst"), cat_("$::prefix/boot/grub/menu.lst"),
      header("XF86Config"), cat_("$::prefix/etc/X11/XF86Config"),
      header("XF86Config-4"), cat_("$::prefix/etc/X11/XF86Config-4"),
      header("/etc/modules"), cat_("$::prefix/etc/modules"),
      header("sysconfig/i18n"), cat_("$::prefix/etc/sysconfig/i18n"),
      map_index { even($::i) ? header($_) : $_ } @other;
}

sub devfssymlinkf {
    my ($if_struct, $of) = @_;
    my $if = $if_struct->{device};

    my $devfs_if = $if_struct->{devfs_device};
    $devfs_if ||= devices::to_devfs($if);
    $devfs_if ||= $if;

    #- example: $of is mouse, $if is usbmouse, $devfs_if is input/mouse0

    output_p("$::prefix/etc/devfs/conf.d/$of.conf", 
"REGISTER	^$devfs_if\$	CFUNCTION GLOBAL mksymlink $devfs_if $of
UNREGISTER	^$devfs_if\$	CFUNCTION GLOBAL unlink $of
");

    output_p("$::prefix/etc/devfs/conf.d/$if.conf", 
"REGISTER	^$devfs_if\$	CFUNCTION GLOBAL mksymlink $devfs_if $if
UNREGISTER	^$devfs_if\$	CFUNCTION GLOBAL unlink $if
") if $devfs_if ne $if && $if !~ /^hd[a-z]/ && $if !~ /^sr/ && $if !~ /^sd[a-z]/;

    output_p("$::prefix/etc/udev/rules.d/$of.rules", qq(KERNEL="$if", SYMLINK="$of"\n));

    #- when creating a symlink on the system, use devfs name if devfs is mounted
    symlinkf($devfs_if, "$::prefix/dev/$if") if $devfs_if ne $if && detect_devices::dev_is_devfs();
    symlinkf($if, "$::prefix/dev/$of");
}
sub devfs_rawdevice {
    my ($if_struct, $of) = @_;

    my $devfs_if = $if_struct->{devfs_device};
    $devfs_if ||= devices::to_devfs($if_struct->{device});
    $devfs_if ||= $if_struct->{device};

    output_p("$::prefix/etc/devfs/conf.d/$of.conf", 
"REGISTER	^$devfs_if\$	EXECUTE /etc/dynamic/scripts/rawdevice.script add /dev/$devfs_if /dev/$of
UNREGISTER	^$devfs_if\$	EXECUTE /etc/dynamic/scripts/rawdevice.script del /dev/$of
");
}

sub fix_broken_alternatives {
    my ($force_default) = @_;
    #- fix bad update-alternatives that may occurs after upgrade (and sometimes for install too).
    -d "$::prefix/etc/alternatives" or return;

    foreach (all("$::prefix/etc/alternatives")) {
	if ($force_default) {
	    log::l("setting alternative $_");
	} else {
	    next if run_program::rooted($::prefix, 'test', '-e', "/etc/alternatives/$_");
	    log::l("fixing broken alternative $_");
	}
	run_program::rooted($::prefix, 'update-alternatives', '--auto', $_);
    }
}


sub fileshare_config {
    my ($in, $type) = @_; #- $type is 'nfs', 'smb' or ''

    my $file = '/etc/security/fileshare.conf';
    my %conf = getVarsFromSh($file);

    my @l = (N_("No sharing"), N_("Allow all users"), N_("Custom"));
    my $restrict = exists $conf{RESTRICT} ? text2bool($conf{RESTRICT}) : 1;

    my $r = $in->ask_from_list_('fileshare',
N("Would you like to allow users to share some of their directories?
Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.

\"Custom\" permit a per-user granularity.
"),
				\@l, $l[$restrict ? 0 : 1]) or return;
    $restrict = $r ne $l[1];
    my $custom = $r eq $l[2];
    if ($r ne $l[0]) {
	require services;
	my %types = (
	    nfs => [ 'nfs-utils', 'nfs',
		     N("NFS: the traditional Unix file sharing system, with less support on Mac and Windows.")
		   ],
	    smb => [ 'samba-server', 'smb',
		     N("SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems.")
		   ],
       );
	my %l;
	if ($type) {
	    %l = ($type => 1);
	} else {
	    %l = map_each { $::a => services::starts_on_boot($::b->[1]) } %types;
	    $in->ask_from_({ messages => N("You can export using NFS or SMB. Please select which you would like to use."),
			     callbacks => { ok_disabled => sub { !any { $_ } values %l } },
			   },
			   [ map { { text => $types{$_}[2], val => \$l{$_}, type => 'bool' } } keys %l ]) or return;
	}
	foreach (keys %types) {
	    my ($pkg, $service, $_descr) = @{$types{$_}};
	    my $file = "/etc/init.d/$service";
	    if ($l{$_}) {
		$in->do_pkgs->ensure_is_installed($pkg, $file) or return;
		services::start($service);
		services::start_service_on_boot($service);
	    } elsif (-e $file) {
		services::stop($service);
		services::do_not_start_service_on_boot($service);
	    }
	}
    }
    $conf{RESTRICT} = bool2yesno($restrict);
    setVarsInSh($file, \%conf);

    if ($custom) {
	run_program::rooted($::prefix, 'groupadd', '-r', 'fileshare');
	if ($in->ask_from_no_check(
	{
	 -e '/usr/sbin/userdrake' ? (ok => N("Launch userdrake"), cancel => N("Close")) : (cancel => ''),
	 messages =>
N("The per-user sharing uses the group \"fileshare\". 
You can use userdrake to add a user to this group.")
	}, [])) {
	    run_program::run('userdrake');
	}
    }
}

sub monitor_full_edid() {
    return if $::noauto;

    my ($vbe, $edid);
    run_program::raw({ timeout => 20 }, 'monitor-edid', '>', \$edid, '2>', \$vbe, '-v', '--perl');
    if ($::isInstall) {
	foreach (['edid', \$edid], ['vbe', \$vbe]) {
	    my ($name, $val) = @$_;
	    if (-e "/tmp/$name") {
		my $old = cat_("/tmp/$name");
		if (length($$val) < length($old)) {
		    log::l("new $name is worse, keeping the previous one");
		    $$val = $old;
		} elsif (length($$val) > length($old)) {
		    log::l("new $name is better, dropping the previous one");
		}
	    }
	    output("/tmp/$name", $$val);
	}
    }
    ($edid, $vbe);
}

sub running_window_manager() {
    my @window_managers = qw(kwin gnome-session icewm wmaker afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish olvwm fluxbox);

    foreach (@window_managers) {
	my @pids = fuzzy_pidofs(qr/\b$_\b/) or next;
	return wantarray() ? ($_, @pids) : $_;
    }
    undef;
}

sub ask_window_manager_to_logout {
    my ($wm) = @_;
    
    my %h = (
	'kwin' => "dcop kdesktop default logout",
	'gnome-session' => "gnome-session-save --kill",
	'icewm' => "killall -QUIT icewm",
	'wmaker' => "killall -USR1 wmaker",
    );
    my $cmd = $h{$wm} or return;
    if ($wm eq 'gnome-session') {
	#- NB: consolehelper does not destroy $HOME whereas kdesu does
	#- for gnome, we use consolehelper, so below works
	$ENV{ICEAUTHORITY} ||= "$ENV{HOME}/.ICEauthority";
    } elsif ($wm eq 'kwin' && $> == 0) {
	#- we can not use dcop when we are root
	$cmd = "su $ENV{USER} -c '$cmd'";
    }
    system($cmd);
    1;
}

sub ask_window_manager_to_logout_then_do {
    my ($wm, $pid, $action) = @_;
    if (fork()) {
	any::ask_window_manager_to_logout($wm);
	return;
    }
    
    open STDIN, "</dev/zero";
    open STDOUT, ">/dev/null";
    open STDERR, ">&STDERR";
    c::setsid();
    exec 'perl', '-e', q(
	my ($wm, $pid, $action) = @ARGV;
	my $nb;
	for ($nb = 30; $nb && -e "/proc/$pid"; $nb--) { sleep 1 }
	system($action) if $nb;
    ), $wm, $pid, $action;
}

sub alloc_raw_device {
    my ($prefix, $device) = @_;
    my $used = 0;
    my $raw_dev;
    substInFile {
	$used = max($used, $1) if m|^\s*/dev/raw/raw(\d+)|;
	if (eof) {
	    $raw_dev = "raw/raw" . ($used + 1);
	    $_ .= "/dev/$raw_dev /dev/$device\n";
	}
    } "$prefix/etc/sysconfig/rawdevices";
    $raw_dev;
}

sub config_dvd {
    my ($prefix, $have_devfsd) = @_;

    #- can not have both a devfs and a non-devfs config
    #- the /etc/sysconfig/rawdevices solution gives errors with devfs

    my @dvds = grep { detect_devices::isDvdDrive($_) } detect_devices::cdroms() or return;

    log::l("configuring DVD: " . join(" ", map { $_->{device} } @dvds));
    #- create /dev/dvd symlink
    each_index {
	devfssymlinkf($_, 'dvd' . ($::i ? $::i + 1 : ''));
	devfs_rawdevice($_, 'rdvd' . ($::i ? $::i + 1 : '')) if $have_devfsd;
    } @dvds;

    if (!$have_devfsd) {
	my $raw_dev = alloc_raw_device($prefix, 'dvd');
	symlink($raw_dev, "$prefix/dev/rdvd");
    }
}

sub config_mtools {
    my ($prefix) = @_;