package install_steps; use diagnostics; use strict; use vars qw($minAvailableSize @filesToSaveForUpgrade); #-###################################################################################### #- misc imports #-###################################################################################### use common qw(:file :system :common :functional); use install_any qw(:all); use partition_table qw(:types); use detect_devices; use modules; use run_program; use lang; use raid; use keyboard; use log; use fsedit; use loopback; use commands; use network; use any; use fs; #- make sure of this place to be available for installation, this could help a lot. #- currently doing a very small install use 36Mb of postinstall-rpm, but installing #- these packages may eat up to 90Mb (of course not all the server may be installed!). #- 50mb may be a good choice to avoid almost all problem of insuficient space left... $minAvailableSize = 50 * sqr(1024); @filesToSaveForUpgrade = qw( /etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules ); #-###################################################################################### #- OO Stuff #-###################################################################################### sub new($$) { my ($type, $o) = @_; bless $o, ref $type || $type; return $o; } #-###################################################################################### #- In/Out Steps Functions #-###################################################################################### sub enteringStep { my ($o, $step) = @_; log::l("starting step `$step'"); } sub leavingStep { my ($o, $step) = @_; log::l("step `$step' finished"); if (-d "$o->{prefix}/root") { eval { commands::cp('-f', "/tmp/ddebug.log", "$o->{prefix}/root") }; install_any::g_auto_install(); } for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) { #- the reachability property must be recomputed each time to take #- into account failed step. next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable}; my $reachable = 1; if (my $needs = $o->{steps}{$s}{needs}) { my @l = ref $needs ? @$needs : $needs; $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l); } $o->{steps}{$s}{reachable} = 1 if $reachable; } $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable}; while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) { eval { &$f() }; $o->ask_warn(_("Error"), [ _("An error occurred, but I don't know how to handle it nicely. Continue at your own risk."), $@ ]) if $@; } } sub errorInStep($$) { print "error :(\n"; c::_exit(1) } sub kill_action {} sub set_help { 1 } #-###################################################################################### #- Steps Functions #-###################################################################################### #------------------------------------------------------------------------------ sub selectLanguage { my ($o) = @_; lang::set($o->{lang}, $o->{langs}); if ($o->{keyboard_unsafe} || !$o->{keyboard}) { $o->{keyboard_unsafe} = 1; $o->{keyboard} = keyboard::lang2keyboard($o->{lang}); selectKeyboard($o); } } #------------------------------------------------------------------------------ sub selectKeyboard { my ($o) = @_; keyboard::setup($o->{keyboard}) } #------------------------------------------------------------------------------ sub selectPath {} #------------------------------------------------------------------------------ sub selectInstallClass($@) { my ($o) = @_; $o->{installClass} ||= $::corporate ? "corporate" : "normal"; $o->{security} ||= ${{ normal => 2, developer => 3, corporate => 3, server => 4, }}{$o->{installClass}}; } #------------------------------------------------------------------------------ sub setupSCSI { modules::load_ide(); modules::load_thiskind('scsi'); } #------------------------------------------------------------------------------ sub doPartitionDisks { my ($o, $hds) = @_; if ($o->{lnx4win}) { my @l = sort { $a->{device_windobe} cmp $b->{device_windobe} } grep { isFat($_) } fsedit::get_fstab(@{$o->{hds}}) or die "wow, lnx4win with no fat partitions! hard times :("; my $real_part = @l > 1 && $o->doPartitionDisksLnx4winDev(\@l) || $l[0]; my $handle = loopback::inspect($real_part, '', 'rw') or die _("This partition can't be used for loopback"); my $size = loopback::getFree($handle->{dir}, $real_part); my $max_linux = 1000 << 11; $max_linux *= 10 if $::expert; my $min_linux = 300 << 11; $min_linux /= 3 if $::expert; my $min_freewin = 100 << 11; $min_freewin /= 10 if $::expert; my $swap = { type => 0x82, loopback_file => '/lnx4win/swapfile', mntpoint => 'swap', size => 64 << 11, device => $real_part, notFormatted => 1 }; my $root = { type => 0x83, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/', size => 0, device => $real_part, notFormatted => 1 }; $root->{size} = min($size - $swap->{size} - $min_freewin, $max_linux); log::l("lnx4win $root->{size} <= $min_linux (minlinux), $size (minavail) - $swap->{size} (swapsize) - $min_freewin (minfreewin), $max_linux (maxlinux)"); $root->{size} > $min_linux or die "not enough room on that partition for lnx4win"; $o->doPartitionDisksLnx4winSize(\$root->{size}, \$swap->{size}, $size - 2 * $swap->{size}, 2 * $swap->{size}); unlink "$handle->{dir}$_" foreach "/lnx4win/swapfile", "/lnx4win/linuxsys.img"; push @{$real_part->{loopback}}, $root, $swap; } else { unless ($::testing) { partition_table::write($_) foreach @$hds; } } } sub doPartitionDisksLnx4winDev {} sub doPartitionDisksLnx4winSize {} #------------------------------------------------------------------------------ sub ask_mntpoint_s { my ($o, $fstab) = @_; #- TODO: set the mntpoints #- assure type is at least ext2 (fsedit::get_root($fstab) || {})->{type} = 0x83; my %m; foreach (@$fstab) { my $m = $_->{mntpoint}; next unless $m && $m ne 'swap'; #- there may be a lot of swap. $m{$m} and die _("Duplicate mount point %s", $m); $m{$m} = 1; #- in case the type does not correspond, force it to ext2 $_->{type} = 0x83 if $m =~ m|^/| && !isFat($_); } } sub rebootNeeded($) { my ($o) = @_; log::l("Rebooting..."); c::_exit(0); } sub choosePartitionsToFormat($$) { my ($o, $fstab) = @_; foreach (@$fstab) { $_->{mntpoint} = "swap" if isSwap($_); $_->{mntpoint} or next; add2hash_($_, { toFormat => $_->{notFormatted} || $o->{partitioning}{autoformat} }); if (!$_->{toFormat}) { my $t = isLoopback($_) ? eval { fsedit::typeOfPart($o->{prefix} . loopback::file($_)) } : fsedit::typeOfPart($_->{device}); $_->{toFormatUnsure} = $_->{mntpoint} eq "/" || #- if detected dos/win, it's not precise enough to just compare the types (too many of them) (isFat({ type => $t }) ? !isFat($_) : $t != $_->{type}); } } } sub formatMountPartitions { my ($o) = @_; fs::formatMount_all($o->{raid}, $o->{fstab}, $o->{prefix}); } #------------------------------------------------------------------------------ sub setPackages { my ($o) = @_; install_any::setPackages($o); } sub selectPackagesToUpgrade { my ($o) = @_; install_any::selectPackagesToUpgrade($o); } sub choosePackages { my ($o, $packages, $compss, $compssUsers, $compssUsersSorted, $first_time) = @_; #- now for upgrade, package that must be upgraded are #- selected first, after is used the same scheme as install. #- make sure we kept some space left for available else the system may #- not be able to start (xfs at least). my $available = install_any::getAvailableSpace($o) - $minAvailableSize; my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024); $available < $availableCorrected or $available = $availableCorrected; foreach (values %{$packages->[0]}) { pkgs::packageSetFlagSkip($_, 0); pkgs::packageSetFlagUnskip($_, 0); } pkgs::unselectAllPackages($packages); pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}}; add2hash_($o, { compssListLevel => $::expert ? 90 : 80 }) unless $::auto_install; pkgs::setSelectedFromCompssList($o->{compssListLevels}, $packages, $o->{compssListLevel}, $available, $o->{installClass}) if exists $o->{compssListLevel}; $available; } sub beforeInstallPackages { my ($o) = @_; #- save these files in case of upgrade failure. if ($o->{isUpgrade}) { foreach (@filesToSaveForUpgrade) { unlink "$o->{prefix}/$_.mdkgisave"; if (-e "$o->{prefix}/$_") { eval { commands::cp("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") }; } } } #- some packages need such files for proper installation. install_any::write_ldsoconf($o->{prefix}); fs::write($o->{prefix}, $o->{fstab}, $o->{manualFstab}, $o->{useSupermount}); network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1"); require pkgs; pkgs::init_db($o->{prefix}, $o->{isUpgrade}); } sub pkg_install { my ($o, @l) = @_; require pkgs; pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l; $o->installPackages; } sub installPackages($$) { #- complete REWORK, TODO and TOCHECK! my ($o) = @_; my $packages = $o->{packages}; if (@{$o->{toRemove} || []}) { #- hack to ensure proper upgrade of packages from other distribution, #- as release number are not mandrake based. this causes save of #- important files and restore them after. foreach (@{$o->{toSave} || []}) { if (-e "$o->{prefix}/$_") { unlink "$o->{prefix}/$_.mdkgisave"; eval { commands::cp("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") }; } } pkgs::remove($o->{prefix}, $o->{toRemove}); foreach (@{$o->{toSave} || []}) { if (-e "$o->{prefix}/$_.mdkgisave") { unlink "$o->{prefix}/$_"; rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_"; } } $o->{toSave} = []; #- hack for compat-glibc to upgrade properly :-( if (pkgs::packageFlagSelected(pkgs::packageByName($packages, 'compat-glibc'))) { rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave"; } } #- small transaction will be built based on this selection and depslist. my @toInstall = pkgs::packagesToInstall($packages); $ENV{DURING_INSTALL} = 1; pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages->[1], $packages->[2]); delete $ENV{DURING_INSTALL}; } sub afterInstallPackages($) { my ($o) = @_; return if $::g_auto_install; -x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die "Some important packages didn't get installed properly. Please switch to console 2 (using ctrl-alt-f2) and look at the log file /tmp/ddebug.log Consoles 1,3,4,7 may also contain interesting information"; pkgs::done_db(); #- why not? cuz weather is nice today :-) [pixel] sync(); sync(); $o->pcmciaConfig(); #- for mandrake_firstime output "$o->{prefix}/var/lock/TMP_1ST", ""; #- remove the nasty acon... run_program::rooted($o->{prefix}, "chkconfig", "--del", "acon") unless $ENV{LANGUAGE} =~ /ar/; #- make the mdk fonts last in available fonts for buggy kde run_program::rooted($o->{prefix}, "chkfontpath", "--remove", "/usr/X11R6/lib/X11/fonts/mdk"); run_program::rooted($o->{prefix}, "chkfontpath", "--add", "/usr/X11R6/lib/X11/fonts/mdk"); #- call update-menus at the end of package installation run_program::rooted($o->{prefix}, "update-menus"); #- mainly for auto_install's run_program::rooted($o->{prefix}, "sh", "-c", $o->{postInstall}) if $o->{postInstall}; #- create /etc/sysconfig/desktop file according to user choice and presence of /usr/bin/kdm or /usr/bin/gdm. my $f = "$o->{prefix}/etc/sysconfig/desktop"; if ($o->{compssUsersChoice}{KDE} && -x "$o->{prefix}/usr/bin/kdm") { output($f, "KDE\n"); } elsif ($o->{compssUsersChoice}{Gnome} && -x "$o->{prefix}/usr/bin/gdm") { output($f, "GNOME\n"); } if ($o->{pcmcia}) { substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences"; eval { commands::cp("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk", "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") }; } my $msec = "$o->{prefix}/etc/security/msec"; substInFile { s/^audio\n//; $_ .= "audio\n" if eof } "$msec/group.conf" if -d $msec; substInFile { s/^cdrom\n//; $_ .= "cdrom\n" if eof } "$msec/group.conf" if -d $msec; substInFile { s/^xgrp\n//; $_ .= "xgrp\n" if eof } "$msec/group.conf" if -d $msec; my $pkg = pkgs::packageByName($o->{packages}, 'urpmi'); if ($pkg && pkgs::packageFlagSelected($pkg)) { install_any::install_urpmi($o->{prefix}, $o->{method}, $o->{packages}[2]); substInFile { s/^urpmi\n//; $_ .= "urpmi\n" if eof } "$msec/group.conf" if -d $msec; } #- update language and icons for KDE. log::l("updating language for kde"); install_any::kdelang_postinstall($o->{prefix}); log::l("updating kde icons according to available devices"); install_any::kdeicons_postinstall($o->{prefix}); my $welcome = _("Welcome to %s", "[HOSTNAME]"); substInFile { s/^(GreetString)=.*/$1=$welcome/ } "$o->{prefix}/usr/share/config/kdmrc"; substInFile { s/^(UserView)=false/$1=true/ } "$o->{prefix}/usr/share/config/kdmrc" if $o->{security} < 3; run_program::rooted($o->{prefix}, "kdeDesktopCleanup"); #- konsole and gnome-terminal are lamers in exotic languages, link them to something better if ($o->{lang} =~ /ja|ko|zh/) { foreach ("konsole", "gnome-terminal") { my $f = "$o->{prefix}/usr/bin/$_"; symlinkf("X11/rxvt.sh", $f) if -e $f; } } my $hasttf; my $dest = "/usr/X11R6/lib/X11/fonts/drakfont"; foreach my $d (map { $_->{mntpoint} } grep { isFat($_) } @{$o->{fstab}}) { foreach my $D (map { "$d/$_" } grep { m|^win|i } all("$o->{prefix}$d")) { $D .= "/fonts"; -d "$o->{prefix}$D" or next; log::l("found win font dir $D"); $hasttf ||= mkdir "$o->{prefix}$dest", 0755; /(.*)\.ttf/i and symlink "$D/$_", "$o->{prefix}$dest/$1.ttf" foreach grep { /\.ttf/i } all("$o->{prefix}$D"); } } if ($hasttf) { run_program::rooted($o->{prefix}, "ttmkfdir", "-d", $dest, "-o", "$dest/fonts.dir"); run_program::rooted($o->{prefix}, "chkfontpath", "--add", $dest); } foreach (install_any::list_skels()) { my $found; substInFile { $found ||= /KFM Misc Defaults/; $_ .= "[KFM Misc Defaults] GridWidth=85 GridHeight=70 " if eof && !$found; } "$o->{prefix}$_/.kde/share/config/kfmrc" } #- move some file after an upgrade that may be seriously annoying. #- and rename saved files to .mdkgiorig. if ($o->{isUpgrade}) { log::l("moving previous desktop files that have been updated to Trash of each user"); install_any::move_desktop_file($o->{prefix}); foreach (@filesToSaveForUpgrade) { if (-e "$o->{prefix}$_.mdkgisave") { unlink "$o->{prefix}$_.mdkgiorig"; rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig"; } } } } #------------------------------------------------------------------------------ sub selectMouse($) { my ($o) = @_; } #------------------------------------------------------------------------------ sub configureNetwork($) { my ($o) = @_; my $etc = "$o->{prefix}/etc"; network::write_conf("$etc/sysconfig/network", $o->{netc}); network::write_resolv_conf("$etc/resolv.conf", $o->{netc}); network::write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_) foreach @{$o->{intf}}; network::add2hosts("$etc/hosts", $o->{netc}{HOSTNAME}, map { $_->{IPADDR} } @{$o->{intf}}); network::sethostname($o->{netc}) unless $::testing; network::addDefaultRoute($o->{netc}) unless $::testing; $o->pkg_install("dhcpxd") if grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } @{$o->{intf}}; # Handle also pump (this is still in initscripts no?) $o->pkg_install("pump") if grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } @{$o->{intf}}; #-res_init(); #- reinit the resolver so DNS changes take affect miscellaneousNetwork($o); } #------------------------------------------------------------------------------ sub pppConfig { my ($o) = @_; $o->{modem} or return; symlinkf($o->{modem}{device}, "$o->{prefix}/dev/modem") or log::l("creation of $o->{prefix}/dev/modem failed"); $o->pkg_install("ppp") unless $::testing; my %toreplace; $toreplace{$_} = $o->{modem}{$_} foreach qw(connection phone login passwd auth domain dns1 dns2); $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3, }}{$o->{modem}{auth}}; $toreplace{phone} =~ s/\D//g; $toreplace{dnsserver} = join ',', map { $o->{modem}{$_} } "dns1", "dns2"; $toreplace{dnsserver} .= $toreplace{dnsserver} && ','; #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file. $toreplace{peerdns} = "yes"; $toreplace{connection} ||= 'DialupConnection'; $toreplace{domain} ||= 'localdomain'; $toreplace{intf} ||= 'ppp0'; $toreplace{papname} = $o->{modem}{auth} eq 'PAP' && $toreplace{login}; #- build ifcfg-ppp0. my $ifcfg = "$o->{prefix}/etc/sysconfig/network-scripts/ifcfg-ppp0"; local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg"; print IFCFG <$chat" or die "Can't open $chat"; print CHAT <{modem}{auth} eq 'Terminal-based' || $o->{modem}{auth} eq 'Script-based') { print CHAT <{modem}{auth} eq 'PAP') { #- need to create a secrets file for the connection. my $secrets = "$o->{prefix}/etc/ppp/" . lc($o->{modem}{auth}) . "-secrets"; my @l = cat_($secrets); my $replaced = 0; do { $replaced ||= 1 if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}" ppp0 "$toreplace{passwd}"/; } foreach @l; if ($replaced) { local *F; open F, ">$secrets" or die "Can't open $secrets: $!"; print F @l; } else { local *F; open F, ">>$secrets" or die "Can't open $secrets: $!"; print F "$toreplace{login} ppp0 \"$toreplace{passwd}\"\n"; } #- restore access right to secrets file, just in case. chmod 0600, $secrets; } #- CHAP is not supported by initscripts, need patching before doing more on that here! #-install_any::template2userfile($o->{prefix}, "$ENV{SHARE_PATH}/kppprc.in", ".kde/share/config/kppprc", 1, %toreplace); commands::mkdir_("-p", "$o->{prefix}/usr/share/config"); template2file("$ENV{SHARE_PATH}/kppprc.in", "$o->{prefix}/usr/share/config/kppprc", %toreplace); miscellaneousNetwork($o); } #------------------------------------------------------------------------------ sub installCrypto { my ($o) = @_; my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return; $o->upNetwork; require crypto; my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}); my $oldGetFile = \&install_any::getFile; local *install_any::getFile = sub { my ($rpmfile) = @_; if ($rpmfile =~ /^(.*)-[^-]*-[^-]*$/ && member($1, @crypto_packages)) { log::l("crypto::getFile $rpmfile"); crypto::getFile($rpmfile, $u->{mirror}); } else { #- use previous getFile typically if non cryptographic packages #- have been selected by dependancies. log::l("normal getFile $rpmfile"); &$oldGetFile($rpmfile); } }; $o->pkg_install(@{$u->{packages}}); } #------------------------------------------------------------------------------ sub pcmciaConfig($) { my ($o) = @_; my $t = $o->{pcmcia}; #- should be set after installing the package above else the file will be renamed. setVarsInSh("$o->{prefix}/etc/sysconfig/pcmcia", { PCMCIA => $t ? "yes" : "no", PCIC => $t, PCIC_OPTS => "", CORE_OPTS => "", }); } #------------------------------------------------------------------------------ sub timeConfig { my ($o, $f) = @_; require timezone; timezone::write($o->{prefix}, $o->{timezone}, $f); } #------------------------------------------------------------------------------ sub servicesConfig {} #------------------------------------------------------------------------------ sub printerConfig { my($o) = @_; if ($o->{printer}{configured}) { require pkgs; pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, 'rhs-printfilters')); $o->installPackages($o->{packages}); require printer; foreach (keys %{$o->{printer}{configured} || {}}) { log::l("configuring printer queue $_->{queue}"); printer::copy_printer_params($_, $o->{printer}); #- setup all configured queues, which is not the case interactively where #- only the working queue is setup on configuration. printer::configure_queue($o->{printer}); } } } #------------------------------------------------------------------------------ my @etc_pass_fields = qw(name pw uid gid realname home shell); sub setRootPassword($) { my ($o) = @_; my $p = $o->{prefix}; my $u = $o->{superuser} ||= {}; $u->{pw} ||= $u->{password} && install_any::crypt($u->{password}); my @lines = cat_(my $f = "$p/etc/passwd") or log::l("missing passwd file"), return; local *F; open F, "> $f" or die "failed to write file $f: $!\n"; foreach (@lines) { if (/^root:/) { chomp; my %l; @l{@etc_pass_fields} = split ':'; add2hash($u, \%l); $_ = join(':', @$u{@etc_pass_fields}) . "\n"; } print F $_; } } #------------------------------------------------------------------------------ sub addUser($) { my ($o) = @_; my $p = $o->{prefix}; my (%uids, %gids); foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; } my %done; my @l = grep { if (!$_->{name} || getpwnam($_->{name}) || $done{$_->{name}}) { 0; } else { $_->{home} ||= "/home/$_->{name}"; my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]); my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]); #- search for available uid above 501 else initscripts may fail to change language for KDE. if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} } if (!$g || getgrgid($g)) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} } $_->{uid} = $u; $uids{$u} = 1; $_->{gid} = $g; $gids{$g} = 1; $_->{pw} ||= $_->{password} && install_any::crypt($_->{password}); $_->{shell} ||= "/bin/bash"; $done{$_->{name}} = 1; } } @{$o->{users} || []}; my @passwd = cat_("$p/etc/passwd");; local *F; open F, ">> $p/etc/passwd" or die "can't append to passwd file: $!"; print F join(':', @$_{@etc_pass_fields}), "\n" foreach @l; open F, ">> $p/etc/group" or die "can't append to group file: $!"; print F "$_->{name}:x:$_->{gid}:\n" foreach @l; foreach my $u (@l) { if (! -d "$p$u->{home}") { my $mode = $o->{security} < 2 ? 0755 : 0750; eval { commands::cp("-f", "$p/etc/skel", "$p$u->{home}") }; if ($@) { log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode); } else { chmod $mode, "$p$u->{home}"; } } eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") } if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg}; } require any; any::addUsers($o->{prefix}, @l); } #------------------------------------------------------------------------------ sub createBootdisk($) { my ($o) = @_; my $dev = $o->{mkbootdisk} or return; my @l = detect_devices::floppies(); $dev = shift @l || die _("No floppy drive available") if $dev eq "1"; #- special case meaning autochoose return if $::testing; if (arch() =~ /^sparc/) { require silo; silo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend}); } else { require lilo; lilo::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend}); } $o->{mkbootdisk} = $dev; } #------------------------------------------------------------------------------ sub readBootloaderConfigBeforeInstall { my ($o) = @_; my ($image, $v); if (arch() =~ /^sparc/) { require silo; add2hash($o->{bootloader} ||= {}, silo::read($o->{prefix}, "/etc/silo.conf")); } else { require lilo; add2hash($o->{bootloader} ||= {}, lilo::read($o->{prefix}, "/etc/lilo.conf")); } #- since kernel or kernel-smp may not be upgraded, it should be checked #- if there is a need to update existing lilo.conf entries by using that #- hash. my %ofpkgs = ( 'vmlinuz' => pkgs::packageByName($o->{packages}, 'kernel'), 'vmlinuz-smp' => pkgs::packageByName($o->{packages}, 'kernel-smp'), ); #- change the /boot/vmlinuz or /boot/vmlinuz-smp entries to follow symlink. foreach $image (keys %ofpkgs) { pkgs::packageFlagSelected($ofpkgs{$image}) or next; if (my $v = readlink "$o->{prefix}/boot/$image") { $v = "/boot/$v" if $v !~ m|^/|; if (-e "$o->{prefix}$v") { my $e = lilo::get("/boot/$image", $o->{bootloader}) or next; $e->{kernel_or_dev} = $v; log::l("renaming /boot/$image entry by $v"); } } } } sub setupBootloaderBefore { my ($o) = @_; if (arch() =~ /alpha/) { if (my $dev = fsedit::get_root($o->{fstab})) { $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}"; $o->{bootloader}{root} ||= "/dev/$dev->{device}"; $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/); } } elsif (arch() =~ /^sparc/) { require silo; silo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o)); } else { require lilo; lilo::suggest($o->{prefix}, $o->{bootloader}, $o->{hds}, $o->{fstab}, install_any::kernelVersion($o)); if ($o->{miscellaneous}{profiles}) { my $e = lilo::get_label("linux", $o->{bootloader}); push @{$o->{bootloader}{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" }; $e->{append} .= " prof=Home"; } lilo::suggest_floppy($o->{bootloader}) if $o->{security} <= 3; $o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard}); } } sub setupBootloader($) { my ($o) = @_; return if $::g_auto_install; if (arch() =~ /alpha/) { return if $::testing; my $b = $o->{bootloader}; $b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return; run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do { cdie "swriteboot failed"; run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx"); }; run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb}); output "$o->{prefix}/etc/aboot.conf", map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" } map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") }; } elsif (arch() =~ /^sparc/) { silo::install($o->{prefix}, $o->{bootloader}); } else { $o->{lnx4win} ? lilo::install_loadlin($o->{prefix}, $o->{bootloader}, $o->{fstab}) : lilo::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{hds}); } } #------------------------------------------------------------------------------ sub setupXfreeBefore { my ($o) = @_; my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard}); if (!-e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$xkb" && (my $f = keyboard::xmodmap_file($o->{keyboard}))) { commands::cp("-f", $f, "$o->{prefix}/etc/X11/xinit/Xmodmap"); $xkb = ''; } $o->{X}{keyboard}{xkb_keymap} = $xkb; $o->{X}{mouse} = $o->{mouse}; $o->{X}{wacom} = $o->{wacom}; require Xconfig; Xconfig::getinfoFromDDC($o->{X}); #- keep this here if the package has to be updated. $o->pkg_install("XFree86"); } sub setupXfree { my ($o) = @_; $o->setupXfreeBefore; require Xconfigurator; require class_discard; { local $::testing = 0; #- unset testing local $::auto = 1; local $::skiptest = 1; Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->{allowFB}, bool($o->{pcmcia}), sub { $o->pkg_install("XFree86-$_[0]"); }); } $o->setupXfreeAfter; } sub setupXfreeAfter { my ($o) = @_; if ($o->{X}{card}{server} eq 'FBDev') { unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) { log::l("disabling automatic start-up of X11 if any as setup framebuffer failed"); Xconfigurator::rewriteInittab(3) unless $::testing; #- disable automatic start-up of X11 on error. } } if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) { log::l("setting large icon style for kde"); install_any::kderc_largedisplay($o->{prefix}); } } #------------------------------------------------------------------------------ sub miscellaneousNetwork { my ($o) = @_; setVarsInSh ("$o->{prefix}/etc/profile.d/proxy.sh", $o->{miscellaneous}, qw(http_proxy ftp_proxy)); setVarsInCsh("$o->{prefix}/etc/profile.d/proxy.csh", $o->{miscellaneous}, qw(http_proxy ftp_proxy)); } #------------------------------------------------------------------------------ sub miscellaneous { my ($o) = @_; my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system"); $o->{miscellaneous}{HDPARM} ||= $s{HDPARM} if exists $s{HDPARM}; $o->{miscellaneous}{CLEAN_TMP} ||= $s{CLEAN_TMP} if exists $s{CLEAN_TMP}; $o->{security} ||= $s{SECURITY} if exists $s{SECURITY}; $ENV{SECURE_LEVEL} = $o->{security}; add2hash_ $o, { useSupermount => $o->{security} < 4 && $o->{installClass} !~ /corporate|server/ }; cat_("/proc/cmdline") =~ /mem=(\S+)/; add2hash_($o->{miscellaneous} ||= {}, { numlock => !$o->{pcmcia}, $1 ? (memsize => $1) : () }); local $_ = $o->{bootloader}{perImageAppend}; if (my $ramsize = $o->{miscellaneous}{memsize} and !/mem=/) { $_ .= " mem=$ramsize"; } if (my @l = detect_devices::getIDEBurners() and !/ide-scsi/) { $_ .= " " . join(" ", (map { "$_=ide-scsi" } @l), map { "$_->{device}=ide-floppy" } detect_devices::ide_zips()); } if (my $m = detect_devices::hasUltra66()) { $_ .= " $m" if !/ide.=/; } #- keep some given parameters #-TODO log::l("perImageAppend: $_"); $o->{bootloader}{perImageAppend} = $_; } #------------------------------------------------------------------------------ sub generateAutoInstFloppy($) { my ($o) = @_; } #------------------------------------------------------------------------------ sub hasNetwork { my ($o) = @_; $o->{intf} && $o->{netc}{NETWORKING} ne 'false' || $o->{modem}; } #------------------------------------------------------------------------------ sub upNetwork { my ($o, $pppAvoided) = @_; modules::write_conf("$o->{prefix}/etc/conf.modules"); if ($o->{intf} && $o->{netc}{NETWORKING} ne 'false') { network::up_it($o->{prefix}, $o->{intf}); } elsif (!$pppAvoided && $o->{modem} && !$o->{modem}{isUp}) { eval { modules::load_multi(qw(serial ppp)) }; run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start"); run_program::rooted($o->{prefix}, "ifup", "ppp0"); $o->{modem}{isUp} = 1; } else { $::testing or return; } 1; } #------------------------------------------------------------------------------ sub downNetwork { my ($o, $pppOnly) = @_; modules::write_conf("$o->{prefix}/etc/conf.modules"); if (!$pppOnly && $o->{intf} && $o->{netc}{NETWORKING} ne 'false') { network::down_it($o->{prefix}, $o->{intf}); } elsif ($o->{modem} && $o->{modem}{isUp}) { run_program::rooted($o->{prefix}, "ifdown", "ppp0"); run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop"); eval { modules::unload($_) foreach qw(ppp serial) }; $o->{modem}{isUp} = 0; } else { $::testing or return; } 1; } #------------------------------------------------------------------------------ sub cleanIfFailedUpgrade($) { my ($o) = @_; #- if an upgrade has failed, there should be .mdkgisave files around. if ($o->{isUpgrade}) { foreach (@filesToSaveForUpgrade) { if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") { rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case ! rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_"; } } } } #-###################################################################################### #- Wonderful perl :( #-###################################################################################### 1;