package install::steps; # $Id: steps.pm 268013 2010-04-29 15:02:04Z pterjan $ use diagnostics; use strict; use vars qw(@filesToSaveForUpgrade @filesNewerToUseAfterUpgrade); #-###################################################################################### #- misc imports #-###################################################################################### use common; use install::any 'addToBeDone'; use partition_table; use detect_devices; use fs::any; use fs::type; use fs::partitioning; use modules; use run_program; use lang; use keyboard; use fsedit; use do_pkgs; use install::pkgs; use any; use log; our @ISA = qw(do_pkgs); @filesToSaveForUpgrade = qw( /etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf ); @filesNewerToUseAfterUpgrade = qw( /etc/profile ); #-###################################################################################### #- OO Stuff #-###################################################################################### sub new($$) { my ($type, $o) = @_; bless $o, ref($type) || $type; return $o; } sub charsetChanged { my ($_o) = @_; } #-###################################################################################### #- In/Out Steps Functions #-###################################################################################### sub enteringStep { my ($_o, $step) = @_; log::l("starting step `$step'"); } sub leavingStep { my ($o, $step) = @_; log::l("step `$step' finished"); if (-d "$::prefix/root/drakx") { eval { cp_af("/tmp/ddebug.log", "$::prefix/root/drakx") }; output(install::any::auto_inst_file(), install::any::g_auto_install(1)); } foreach my $s (@{$o->{orderedSteps}}) { #- the reachability property must be recomputed each time to take #- into account failed step. next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable}; my $reachable = 1; if (my $needs = $o->{steps}{$s}{needs}) { my @l = ref($needs) ? @$needs : $needs; $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l); } $o->{steps}{$s}{reachable} = 1 if $reachable; } $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable}; while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) { eval { &$f() }; if (my $err = $@) { $o->ask_warn(N("Error"), [ N("An error occurred, but I do not know how to handle it nicely. Continue at your own risk."), formatError($err) || $err ]); } } } sub errorInStep { my ($_o, $err) = @_; print "error :(\n"; print "$err\n\n"; c::_exit(1); } sub kill_action {} #-###################################################################################### #- Steps Functions #-###################################################################################### #------------------------------------------------------------------------------ sub selectLanguage { my ($o) = @_; $o->{locale}{langs} ||= { $o->{locale}{lang} => 1 }; if (!exists $o->{locale}{country}) { lang::lang_changed($o->{locale}); } add2hash_($o->{locale}, { utf8 => lang::utf8_should_be_needed($o->{locale}) }); lang::set($o->{locale}, !$o->isa('interactive::gtk')); log::l("selectLanguage: pack_langs: ", lang::pack_langs($o->{locale}{langs}), " utf8-flag: ", to_bool($o->{locale}{utf8})); #- for auto_install compatibility with old $o->{keyboard} containing directly $o->{keyboard}{KEYBOARD} $o->{keyboard} = { KEYBOARD => $o->{keyboard} } if $o->{keyboard} && !ref($o->{keyboard}); if (!$o->{keyboard} || $o->{keyboard}{unsafe}) { $o->{keyboard} = keyboard::default($o->{locale}); $o->{keyboard}{unsafe} = 1; keyboard::setup_install($o->{keyboard}); } $o->charsetChanged; addToBeDone { lang::write_langs($o->{locale}{langs}); } 'formatPartitions'; addToBeDone { lang::write_and_install($o->{locale}, $o->do_pkgs); } 'installPackages'; } #------------------------------------------------------------------------------ sub selectKeyboard { my ($o) = @_; keyboard::setup_install($o->{keyboard}); addToBeDone { #- the bkmap keymaps in installer are deficient, we need to load the real one before keyboard::write which will generate /etc/sysconfig/console/default.kmap run_program::rooted($::prefix, 'loadkeys', keyboard::keyboard2kmap($o->{keyboard})) or log::l("loadkeys failed"); keyboard::write($o->{keyboard}); } 'installPackages' if !$o->{isUpgrade} || !$o->{keyboard}{unsafe}; } #------------------------------------------------------------------------------ sub acceptLicense {} #------------------------------------------------------------------------------ sub setupSCSI { my ($o) = @_; install::any::configure_pcmcia($o); modules::load(modules::category2modules('disk/cdrom')); modules::load_category($o->{modules_conf}, 'bus/firewire'); modules::load_category($o->{modules_conf}, 'disk/scsi'); #- load disk/scsi before disk/ide since libata is now the default #- (to prevent modules::load_category from loading ide-generic too early) modules::load_category($o->{modules_conf}, 'disk/ide|hardware_raid|sata|firewire'); install::any::getHds($o); } #------------------------------------------------------------------------------ sub selectInstallClass { my ($o) = @_; if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) { # either one root is defined (and all is ok), or we take the first one we find my $p = fs::get::root_($o->{fstab}) || (first(install::any::find_root_parts($o->{fstab}, $::prefix)) || die)->{part}; $o->{migrate_device_names} = install::any::use_root_part($o->{all_hds}, $p); $o->{previous_release} = $p if $o->{isUpgrade}; } } #------------------------------------------------------------------------------ sub doPartitionDisksBefore { my ($o) = @_; eval { eval { fs::mount::umount("$::prefix/sys") }; eval { fs::mount::umount("$::prefix/proc/bus/usb") }; eval { fs::mount::umount("$::prefix/proc") }; eval { fs::mount::umount_all($o->{fstab}) }; eval { sleep 1; fs::mount::umount_all($o->{fstab}) } if $@; #- HACK } if $o->{fstab} && !$::testing; } #------------------------------------------------------------------------------ sub doPartitionDisksAfter { my ($o) = @_; fs::any::write_hds($o->{all_hds}, $o->{fstab}, !$o->{isUpgrade}, sub { $o->rebootNeeded }, $o); if ($::local_install) { my $p = fs::get::mntpoint2part($::prefix, [ fs::read_fstab('', '/proc/mounts') ]); my $part = find { fs::get::is_same_hd($p, $_) } @{$o->{fstab}}; $part ||= $o->{fstab}[0]; $part->{mntpoint} = '/'; $part->{isMounted} = 1; } fs::any::check_hds_boot_and_root($o->{all_hds}, $o->{fstab}); if ($o->{partitioning}{use_existing_root}) { #- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat fs::mount::part($_) foreach sort { $a->{mntpoint} cmp $b->{mntpoint} } grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}}; } } #------------------------------------------------------------------------------ sub doPartitionDisks { my ($o) = @_; if ($o->{partitioning}{auto_allocate}) { catch_cdie { fsedit::auto_allocate($o->{all_hds}, $o->{partitions}) } sub { 1 }; } } #------------------------------------------------------------------------------ sub rebootNeeded($) { my ($_o) = @_; log::l("Rebooting..."); c::_exit(0); } sub choosePartitionsToFormat { my ($o) = @_; fs::partitioning::guess_partitions_to_format($o->{fstab}); } sub formatMountPartitions { my ($o) = @_; fs::format::formatMount_all($o->{all_hds}, $o->{fstab}, undef); } #------------------------------------------------------------------------------ sub setPackages { my ($o) = @_; install::any::setPackages($o); } sub ask_deselect_media__copy_on_disk { my (undef, $_hdlists, $_copy_rpms_on_disk) = @_; 0; } sub ask_change_cd { my (undef, $phys_m) = @_; log::l("change to medium $phys_m refused (it can't be done automatically)"); 0; } sub selectSupplMedia { '' } sub choosePackages { my ($o, $o_compssListLevel) = @_; #- clear the mirror cache before upgrading: eval { rm_rf("$::prefix/var/cache/urpmi/mirrors.cache") }; #- now for upgrade, package that must be upgraded are #- selected first, after is used the same scheme as install. #- make sure we kept some space left for available else the system may #- not be able to start my $available = install::any::getAvailableSpace($o); my $availableCorrected = install::pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024); log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected)); #- !! destroying user selection of packages (they may have done individual selection before) exists $o->{compssListLevel} || defined $o_compssListLevel and install::pkgs::setSelectedFromCompssList($o->{packages}, $o->{rpmsrate_flags_chosen}, $o_compssListLevel || $o->{compssListLevel}, $availableCorrected); $availableCorrected; } sub upgrading_redhat() { #- remove weird config files that bother Xconfig::* too much unlink "$::prefix/etc/X11/XF86Config"; unlink "$::prefix/etc/X11/XF86Config-4"; sub prefering_mdv { my ($lpkg, $rpkg_ver, $c) = @_; my $lpkg_ver = $lpkg->version . '-' . $lpkg->release; log::l($lpkg->name . ' ' . ': prefering ' . ($c == 1 ? "$lpkg_ver over $rpkg_ver" : "$rpkg_ver over $lpkg_ver")); } my $old_compare_pkg = \&URPM::Package::compare_pkg; undef *URPM::Package::compare_pkg; *URPM::Package::compare_pkg = sub { my ($lpkg, $rpkg) = @_; my $c = ($lpkg->release =~ /mdv|mnb|mga/ ? 1 : 0) - ($rpkg->release =~ /mdv|mnb|mga/ ? 1 : 0); if ($c) { prefering_mdv($lpkg, $rpkg->version . '-' . $rpkg->release, $c); $c; } else { &$old_compare_pkg; } }; my $old_compare = \&URPM::Package::compare; undef *URPM::Package::compare; *URPM::Package::compare = sub { my ($lpkg, $rpkg_ver) = @_; my $c = ($lpkg->release =~ /mdv|mnb|mga/ ? 1 : 0) - ($rpkg_ver =~ /mdv|mnb|mga/ ? 1 : 0); if ($c) { prefering_mdv($lpkg, $rpkg_ver, $c); return $c; } &$old_compare; }; } sub beforeInstallPackages { my ($o) = @_; read_bootloader_config($o); if ($o->{isUpgrade}) { $o->{modules_conf}->merge_into(modules::any_conf->read); } #- save these files in case of upgrade failure. if ($o->{isUpgrade}) { foreach (@filesToSaveForUpgrade) { unlink "$::prefix/$_.mdkgisave"; if (-e "$::prefix/$_") { eval { cp_af("$::prefix/$_", "$::prefix/$_.mdkgisave") }; } } foreach (@filesNewerToUseAfterUpgrade) { unlink "$::prefix/$_.rpmnew"; } } #- mainly for upgrading redhat packages, but it can help other my @should_not_be_dirs = qw(/usr/share/locale/zh_TW/LC_TIME /usr/include/GL); my @should_be_dirs = qw(/etc/X11/xkb); my @to_remove = ( (grep { !-l $_ && -d $_ } map { "$::prefix$_" } @should_not_be_dirs), (grep { -l $_ || !-d $_ && -e $_ } map { "$::prefix$_" } @should_be_dirs), ); rm_rf(@to_remove); if ($o->{isUpgrade} eq 'redhat') { upgrading_redhat(); } if ($o->{isUpgrade} =~ /redhat|conectiva/) { #- to ensure supermount is removed (???) fs::mount_options::set_all_default($o->{all_hds}, %$o, lang::fs_options($o->{locale})); } #- some packages need such files for proper installation. install::any::write_fstab($o); require network::network; network::network::add2hosts("localhost", "127.0.0.1"); #- resolv.conf will be modified at boot time #- the following will ensure we have a working DNS during install if (-e "/etc/resolv.conf" && ! -e "$::prefix/etc/resolv.conf") { cp_af("/etc/resolv.conf", "$::prefix/etc"); } if (-e '/tmp/.X11-unix') { mkdir "$::prefix/tmp/.X11-unix"; run_program::run('mount', '--bind', '/tmp/.X11-unix', "$::prefix/tmp/.X11-unix"); } log::l("setting excludedocs to $o->{excludedocs}"); substInFile { s/%_excludedocs.*//; $_ .= "%_excludedocs yes\n" if eof && $o->{excludedocs} } "$::prefix/etc/rpm/macros"; #- add oem theme if the files exists. mkdir_p("$::prefix/usr/share"); install::media::getAndSaveFile_($o->{stage2_phys_medium}, "install/oem-theme.rpm", "$::prefix/usr/share/oem-theme.rpm"); system("sh", "-c", $o->{preInstallNonRooted}) if $o->{preInstallNonRooted}; } #- returns number of packages installed, 0 if none were selected. sub pkg_install { my ($o, @l) = @_; log::l("selecting packages " . join(" ", @l)); install::pkgs::select_by_package_names($o->{packages}, \@l); my @toInstall = install::pkgs::packagesToInstall($o->{packages}); if (@toInstall) { log::l("installing packages"); $o->installPackages; } else { log::l("all packages selected are already installed, nothing to do"); delete $o->{packages}{rpmdb}; #- make sure rpmdb is closed 0; } } sub installCallback { # my (undef, $msg, @para) = @_; # log::l("$msg: " . join(',', @para)); } sub installPackages { my ($o, $o_interactive) = @_; my $p = fs::get::root_($o->{fstab}); if (isLUKS($p)) { install::pkgs::selectPackage($o->{packages}, install::pkgs::packageByName($o->{packages}, 'plymouth')); } my $packages = $o->{packages}; install::pkgs::remove_marked_ask_remove($packages, \&installCallback); #- small transaction will be built based on this selection and depslist. my @toInstall = install::pkgs::packagesToInstall($packages); my $time = time(); { local $ENV{DURING_INSTALL} = 1; local $ENV{TMPDIR} = '/tmp'; local $ENV{TMP} = '/tmp'; local $ENV{HOME}; local $packages->{options}{auto} = !$o_interactive; install::pkgs::install($o->{isUpgrade}, \@toInstall, $packages, \&installCallback); } any::writeandclean_ldsoconf($::prefix); run_program::rooted_or_die($::prefix, 'ldconfig'); log::l("Install took: ", formatTimeRaw(time() - $time)); install::media::log_sizes(); scalar(@toInstall); #- return number of packages installed. } sub afterInstallPackages($) { my ($o) = @_; read_bootloader_config($o) if $o->{isUpgrade} && is_empty_hash_ref($o->{bootloader}); die N("Some important packages did not get installed properly. Either your cdrom drive or your cdrom is defective. Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\" ") if any { m|read failed: Input/output error| } cat_("$::prefix/root/drakx/install.log"); if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc -x "$::prefix/usr/bin/dumpkeys" or $::testing or die "Some important packages did not get installed properly. Please switch to console 2 (using ctrl-alt-f2) and look at the log file /tmp/ddebug.log Consoles 1,3,4,7 may also contain interesting information"; } #- why not? cuz weather is nice today :-) [pixel] common::sync(); common::sync(); #- generate /etc/lvmtab needed for rc.sysinit run_program::rooted($::prefix, 'lvm2', 'vgscan') if -e '/etc/lvmtab'; require harddrake::autoconf; #- configure PCMCIA services if needed. harddrake::autoconf::pcmcia($o->{pcmcia}); #- configure CPU frequency modules harddrake::autoconf::cpufreq(); harddrake::autoconf::floppy(); #- for mageia_firstime touch "$::prefix/var/lock/TMP_1ST"; fs::any::set_cdrom_symlink($o->{all_hds}{raw_hds}); any::config_mtools($::prefix); #- make sure wins is disabled in /etc/nsswitch.conf #- else if eth0 is not existing, glibc segfaults. substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$::prefix/etc/nsswitch.conf"; #- make sure some services have been enabled (or a catastrophic restart will occur). #- these are normally base package post install scripts or important services to start. run_program::rooted($::prefix, "chkconfig", "--add", $_) foreach qw(netfs network rawdevices sound kheader keytable syslog crond portmap); if ($o->{mouse}{device} =~ /ttyS/) { log::l("disabling gpm for serial mice (does not get along nicely with X)"); run_program::rooted($::prefix, "chkconfig", "--del", "gpm"); } if ($o->{pcmcia}) { substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$::prefix/usr/lib/X11/icewm/preferences"; eval { cp_af("$::prefix/usr/share/applnk/System/kapm.kdelnk", "$::prefix/etc/skel/Desktop/Autostart/kapm.kdelnk") }; } if ($o->{brltty}) { output("$::prefix/etc/brltty.conf", <{brltty}{driver} braille-device $o->{brltty}{device} text-table $o->{brltty}{table} EOF } install::any::disable_user_view() if $o->{security} > 1 || $o->{authentication}{NIS}; run_program::rooted($::prefix, "kdeDesktopCleanup"); #- move some file after an upgrade that may be seriously annoying. #- and rename saved files to .mdkgiorig. if ($o->{isUpgrade}) { my $pkg = install::pkgs::packageByName($o->{packages}, 'rpm'); $pkg && ($pkg->flag_selected || $pkg->flag_installed) && $pkg->compare(">= 4.0") and install::pkgs::cleanOldRpmDb(); log::l("moving previous desktop files that have been updated to Trash of each user"); install::any::kdemove_desktop_file($::prefix); foreach (@filesToSaveForUpgrade) { renamef("$::prefix/$_.mdkgisave", "$::prefix/$_.mdkgiorig") if -e "$::prefix$_.mdkgisave"; } foreach (@filesNewerToUseAfterUpgrade) { if (-e "$::prefix/$_.rpmnew" && -e "$::prefix/$_") { renamef("$::prefix/$_", "$::prefix/$_.mdkgiorig"); renamef("$::prefix/$_.rpmnew", "$::prefix/$_"); } } } renamef(install::pkgs::removed_pkgs_to_upgrade_file(), install::pkgs::removed_pkgs_to_upgrade_file() . '.done'); unlink(glob("$::prefix/root/drakx/*.upgrading")); if ($o->{upgrade_by_removing_pkgs_matching}) { if (cat_("$::prefix/etc/inittab.rpmsave") =~ /^id:5:initdefault:\s*$/m) { $o->{X}{xdm} = 1; require Xconfig::various; Xconfig::various::runlevel(5); } } any::fix_broken_alternatives($o->{isUpgrade} eq 'redhat'); #- update theme directly from a package (simplest). if (-s "$::prefix/usr/share/oem-theme.rpm") { run_program::rooted($::prefix, "rpm", "-U", "/usr/share/oem-theme.rpm"); unlink "/usr/share/oem-theme.rpm"; } #- call update-menus at the end of package installation push @{$o->{waitpids}}, run_program::raw({ root => $::prefix, detach => 1 }, "update-menus", "-n"); $o->install_hardware_packages; if ($o->{updatemodules}) { $o->updatemodules($ENV{THIRDPARTY_DEVICE}, $ENV{THIRDPARTY_DIR}); } } sub install_urpmi { my ($o) = @_; my $pkg = install::pkgs::packageByName($o->{packages}, 'urpmi'); if ($pkg && ($pkg->flag_selected || $pkg->flag_installed) #- this is a workaround. if many urpmi packages are found in the #- provides of all media, packages_providing() might return the wrong #- one. This probably needs to be fixed in URPM || run_program::rooted_get_stdout($::prefix, '/bin/rpm', '-q', 'urpmi') =~ /urpmi/ ) { install::media::install_urpmi($o->{method}, $o->{packages}); install::pkgs::saveCompssUsers($o->{packages}, $o->{compssUsers}); } else { log::l("skipping install_urpmi, urpmi not installed"); } } sub install_hardware_packages { my ($o) = @_; if ($o->{match_all_hardware}) { my @l = pkgs::detect_hardware_packages($o->do_pkgs, $o->{match_all_hardware}); $o->do_pkgs->install(@l) if @l; } } sub updatemodules { my ($_o, $dev, $rel_dir) = @_; return if $::testing; $dev = devices::make($dev) or log::l("updatemodules: bad device $dev"), return; my $mount_dir = '/updatemodules'; find { eval { fs::mount::mount($dev, $mount_dir, $_, 0); 1 }; } 'ext2', 'vfat' or log::l("updatemodules: can't mount $dev"), return; my $dir = "$mount_dir$rel_dir"; foreach my $kernel_version (all("$::prefix/lib/modules")) { log::l("examining updated modules for kernel $kernel_version"); -d "$dir/$kernel_version" or next; log::l("found updatable modules"); run_program::run("cd $dir/$kernel_version ; find -type f | cpio -pdu $::prefix/lib/modules/$kernel_version"); run_program::rooted($::prefix, 'depmod', '-a', '-F', "/boot/System.map-$kernel_version", $kernel_version); } my $category; foreach (cat_("$dir/to_load")) { chomp; if (/^#/) { ($category) = $1 if /\[list_modules: (.*?)\]/; } elsif ($category) { log::l("adding $_ to $category\n"); my $r = \%list_modules::l; $r = $r->{$_} foreach split('/', $category); push @$r, $_; $category = ''; } } fs::mount::umount($mount_dir); } #------------------------------------------------------------------------------ sub selectMouse($) { my ($_o) = @_; } #------------------------------------------------------------------------------ sub configureNetwork { my ($o) = @_; require network::network; network::network::configure_network($o->{net}, $o, $o->{modules_conf}); configure_firewall($o) if !$o->{isUpgrade}; #- only a http proxy can be used by stage1 #- the method is http even for ftp connections through a http proxy #- use this http proxy for both http and ftp connections if ($o->{method} eq "http" && $ENV{PROXY}) { my $proxy = "http://$ENV{PROXY}" . ($ENV{PROXYPORT} && ":$ENV{PROXYPORT}"); add2hash($o->{miscellaneous} ||= {}, { http_proxy => $proxy, ftp_proxy => $proxy, }); network::network::proxy_configure($o->{miscellaneous}); } } sub configure_firewall { my ($o) = @_; #- set up a firewall if ports have been specified or if the security level is high enough $o->{firewall_ports} ||= '' if $o->{security} >= 1 && !exists $o->{firewall_ports}; if (defined $o->{firewall_ports}) { require network::drakfirewall; $o->{firewall_ports} ||= ''; #- don't open any port by default network::drakfirewall::set_ports($o->do_pkgs, 0, $o->{firewall_ports}, 'log_net_drop'); network::drakfirewall::set_ifw($o->do_pkgs, 1, [ 'psd' ], ''); } } #------------------------------------------------------------------------------ sub installUpdates {} sub summaryBefore {} sub summary { my ($o) = @_; configureTimezone($o); } sub summaryAfter { my ($_o) = @_; } #------------------------------------------------------------------------------ sub configureTimezone { my ($o) = @_; install::any::preConfigureTimezone($o); $o->pkg_install('ntp') if $o->{timezone}{ntp}; require timezone; timezone::write($o->{timezone}); } #------------------------------------------------------------------------------ sub configureServices { my ($o) = @_; if ($o->{services}) { require services; services::doit($o, $o->{services}); } } #------------------------------------------------------------------------------ sub setRootPassword_addUser { my ($o) = @_; setRootPassword($o); addUser($o); } sub setRootPassword { my ($o) = @_; $o->{superuser} ||= {}; require authentication; authentication::set_root_passwd($o->{superuser}, $o->{authentication}); install::any::set_authentication($o); } sub addUser { my ($o) = @_; my $users = $o->{users} ||= []; if ($::prefix) { #- getpwnam, getgrnam, getgrid works symlinkf("$::prefix/etc/passwd", '/etc/passwd'); symlinkf("$::prefix/etc/group", '/etc/group'); } any::add_users($users, $o->{authentication}); if ($o->{rpmsrate_flags_chosen}{CAT_X}) { my $autologin = any::get_autologin(); $autologin->{user} = $o->{autologin}; $autologin->{desktop} = $o->{desktop} if $o->{desktop}; $autologin->{dm} = $o->{dm} if $o->{dm}; any::set_autologin($o->do_pkgs, $autologin); } install::any::disable_user_view() if @$users == (); } #------------------------------------------------------------------------------ sub read_bootloader_config { my ($o) = @_; require bootloader; eval { add2hash($o->{bootloader} ||= {}, bootloader::read($o->{all_hds})) }; $@ && $o->{isUpgrade} and log::l("read_bootloader_config failed: $@"); $o->{bootloader}{bootUnsafe} = 0 if $o->{bootloader}{boot}; #- when upgrading, do not ask where to install the bootloader (mbr vs boot partition) } sub setupBootloaderBefore { my ($o) = @_; any::setupBootloaderBefore($o->do_pkgs, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{keyboard}, $o->{allowFB}, $o->{vga}, $o->{meta_class} ne 'server'); } sub setupBootloader { my ($o) = @_; any::install_bootloader_pkgs($o->do_pkgs, $o->{bootloader}); require bootloader; bootloader::install($o->{bootloader}, $o->{all_hds}); } #------------------------------------------------------------------------------ sub configureXBefore { my ($o) = @_; #- keep this here if the package has to be updated. $o->pkg_install("task-x11"); } sub configureX { my ($o) = @_; configureXBefore($o); require Xconfig::default; $o->{raw_X} = Xconfig::default::configure($o->do_pkgs, $o->{keyboard}, $o->{mouse}); require Xconfig::main; Xconfig::main::configure_everything_auto_install($o->{raw_X}, $o->do_pkgs, $o->{X}, install::any::X_options_from_o($o)); configureXAfter($o); } sub configureXAfter { my ($_o) = @_; } #------------------------------------------------------------------------------ sub miscellaneousBefore { my ($o) = @_; require security::level; require security::various; $o->{security} ||= security::level::get(); $o->{security_user} ||= security::various::config_security_user($::prefix); log::l("security level is $o->{security}"); } sub miscellaneous { my ($_o) = @_; #- keep some given parameters #-TODO } sub miscellaneousAfter { my ($o) = @_; $ENV{SECURE_LEVEL} = $o->{security}; #- deprecated with chkconfig 1.3.4-2mdk, uses /etc/sysconfig/msec addToBeDone { addVarsInSh("$::prefix/etc/sysconfig/system", { META_CLASS => $o->{meta_class} }); eval { install::any::set_security($o) }; } 'installPackages'; } #------------------------------------------------------------------------------ sub exitInstall { my ($o) = @_; install::any::deploy_server_notify($o) if exists $o->{deploy_server}; #- mainly for auto_install's #- do not use run_program::xxx because it does not leave stdin/stdout unchanged system("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted}; system("chroot", $::prefix, "bash", "-c", $o->{postInstall}) if $o->{postInstall}; eval { my $report = '/root/drakx/report.bug'; unlink "$::prefix$report", "$::prefix$report.gz"; output "$::prefix$report", install::any::report_bug(); run_program::rooted($::prefix, 'gzip', $report); }; output("$::prefix/root/drakx/package_list.pl", install::any::selected_leaves_pl($o)); eval { install::any::getAndSaveAutoInstallFloppies($o, 1) } if arch() !~ /^ppc/; eval { output "$::prefix/root/drakx/README", "This directory contains several installation-related files, mostly log files (very useful if you ever report a bug!). Beware that some %s tools rely on the contents of some of these files... so remove any file from here at your own risk! " }; #- wait for remaining processes. foreach (@{$o->{waitpids}}) { waitpid $_, 0; log::l("pid $_ returned $?"); } install::media::umount_media($o->{packages}); install::media::openCdromTray($o->{stage2_phys_medium}{device}) if !detect_devices::is_xbox() && $o->{method} eq 'cdrom'; install::media::log_sizes(); } #------------------------------------------------------------------------------ sub hasNetwork { my ($o) = @_; $o->{net}{type} && $o->{net}{network}{NETWORKING} ne 'no' and return 1; log::l("no network seems to be configured for internet ($o->{net}{type},$o->{net}{network}{NETWORKING})"); 0; } sub network_is_cheap { my ($o) = @_; member($o->{net}{type}, qw(adsl lan cable)); } sub start_network_interface { my ($o) = @_; require network::tools; network::tools::start_net_interface($o->{net}, 0); } sub stop_network_interface { my ($o) = @_; require network::tools; network::tools::stop_net_interface($o->{net}, 0); } #------------------------------------------------------------------------------ sub upNetwork { my ($o, $b_pppAvoided) = @_; install::any::is_network_install($o) || $::local_install and return 1; $o->{modules_conf}->write; if (! -e "/etc/resolv.conf") { #- symlink resolv.conf in install root too so that updates and suppl media can be added symlink "$::prefix/etc/resolv.conf", "/etc/resolv.conf"; } if (hasNetwork($o)) { if (network_is_cheap($o)) { log::l("starting network ($o->{net}{type})"); start_network_interface($o); return 1; } elsif (!$b_pppAvoided) { log::l("starting network (ppp: $o->{net}{type})"); eval { modules::load(qw(serial ppp bsd_comp ppp_deflate)) }; run_program::rooted($::prefix, "/etc/rc.d/init.d/syslog", "start"); start_network_interface($o); return 1; } else { log::l(qq(not starting network (b/c ppp avoided and type is "$o->{net}{type})")); } } $::testing; } #------------------------------------------------------------------------------ sub downNetwork { my ($o, $costlyOnly) = @_; install::any::is_network_install($o) || $::local_install and return 1; $o->{modules_conf}->write; if (hasNetwork($o)) { if (!$costlyOnly) { stop_network_interface($o); return 1; } elsif (!network_is_cheap($o)) { stop_network_interface($o); run_program::rooted($::prefix, "/etc/rc.d/init.d/syslog", "stop"); eval { modules::unload(qw(ppp_deflate bsd_comp ppp serial)) }; return 1; } } $::testing; } #------------------------------------------------------------------------------ sub cleanIfFailedUpgrade($) { my ($o) = @_; #- if an upgrade has failed, there should be .mdkgisave files around. if ($o->{isUpgrade}) { foreach (@filesToSaveForUpgrade) { if (-e "$::prefix/$_" && -e "$::prefix/$_.mdkgisave") { rename "$::prefix/$_", "$::prefix/$_.mdkginew"; #- keep new files around in case ! rename "$::prefix/$_.mdkgisave", "$::prefix/$_"; } } } } 1;