# translation of DrakX.po to Punjabi
# translation of DrakX.po to Panjabi
# Copyright (C) 2005 Free Software Foundation, Inc.
# Kanwaljeet Singh Brar <kanwaljeetbrar@yahoo.co.in>, 2005.
# Jaswinder Singh Phulewala <jaswinderphulewala@yahoo.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-05-19 17:21+0200\n"
"PO-Revision-Date: 2005-03-27 17:55+0530\n"
"Last-Translator: Jaswinder Singh Phulewala <jaswinderphulewala@yahoo.com>\n"
"Language-Team: Punjabi <punlinux-i18n@lists.soruceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9.1\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "ਕਿਹੜੀ USB ਕੁੰਜੀ ਨੂੰ ਤੁਸੀਂ ਫਾਰਮਿਟ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"ਤੁਸੀਂ USB ਜੰਤਰ \"%s\" ਨੂੰ ਫਾਰਮਿਟ ਕਰ ਰਹੇ ਹੋ। ਇਸ ਨਾਲ ਸਭ ਡਾਟਾ ਹਟਾਇਆ ਜਾਵੇਗਾ।\n"
"ਯਕੀਨਨ ਬਣਾਓ ਕਿ ਚੁਣਿਆ ਜੰਤਰ USB ਕੁੰਜੀ ਹੈ ਜੋ ਤੁਸੀਂ ਫਾਰਮਿਟ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ। \n"
"ਅਸੀਂ ਤੁਹਾਨੂੰ ਇਹ ਕਿਰਿਆ ਕਰਨ ਦੌਰਾਨ ਸਾਰੇ USB ਭੰਡਾਰ ਜੰਤਰ ਲਾ ਦੇਣ ਲਈ ਕਹਿੰਦੇ ਹਾਂ।"
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "ਕੁੰਜੀ ਲਿਖਣ ਯੋਗ ਨਹੀਂ"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"USB ਕੁੰਜੀ ਲਿਖਣ ਲਈ ਯੋਗ ਨਹੀਂ। ਕਿਰਪਾ ਕਰਕੇ ਇਸ ਨੂੰ ਲਾ \n"
"ਦਿਓ, ਲਿਖਣ ਮਨਾਹੀ ਹਟਾਓ, ਅਤੇ ਫਿਰ ਜੋੜੋ।"
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "ਮੁੜ-ਕੋਸ਼ਿਸ"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "USB ਕੁੰਜੀ ਬਿਨਾਂ ਹੀ ਜਾਰੀ"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"USB ਕੁੰਜੀ ਲਿਖਣ ਯੋਗ ਨਹੀਂ ਹੈ, ਪਰ ਅਸੀਂ ਇਸ ਨੂੰ ਲਾ ਨਹੀਂ \n"
"ਸਕਦੇ।\n"
"\n"
"\n"
"ਮਸ਼ੀਨ ਮੁੜ ਚਲਾਉਣ ਲਈ ਬਟਨ ਦਬਾਓ, ਲਾ ਦਿਓ, ਲਿਖਣ ਮਨਾਹੀ ਹਟਾਓ,\n"
"ਕੁੰਜੀ ਫਿਰ ਜੋੜੋ, ਅਤੇ ਮੈਂਡਰਿਵ ਮੂਵ ਅਗੇਨ ਚਲਾਓ।"
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
#, c-format
msgid "Reboot"
msgstr "ਮੁੜ-ਚਾਲੂ"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"ਤੁਹਾਡੀ USB ਕੁੰਜੀ ਕੋਲ ਯੋਗ Windows (FAT) ਭਾਗ ਨਹੀਂ ਹੈ।\n"
"ਸਾਨੂੰ ਇੱਕ ਜਾਰੀ ਕਰਨ ਦੀ ਜਰੂਰਤ ਹੈ (ਦੂਜੇ ਪਾਸੇ, ਇਸ ਜਿਆਦਾ ਮਿਆਰੀ ਹੈ\n"
"ਤਾਂ ਕਿ ਤੁਸੀਂ ਇਧਰ-ਓਧਰ ਕਰ ਸਕਦੇ ਹੋ ਅਤੇ Windows ਵਾਲੀ ਮਸ਼ੀਨ ਤੋਂ \n"
"ਆਪਣੀਆਂ ਫਾਇਲਾਂ ਵੇਖ ਸਕਦੇ ਹੋ)। ਕਿਰਪਾ ਕਰਕੇ Windows ਭਾਗ ਵਾਲੀ USB\n"
"ਕੁੰਜੀ ਜੋੜੋ।\n"
"\n"
"\n"
"ਤੁਸੀਂ USB ਕੁੰਜੀ ਤੋਂ ਬਿਨਾ ਜਾਰੀ ਕਰ ਸਕਦੇ ਹੋ - ਤੁਸੀਂ ਹਾਲੇ ਵੀ \n"
"Mandriva Move ਨੂੰ ਸਧਾਰਨ ਲਾਈਵ ਮੈਂਡਰਿਵ ਆਪਰੇਟਿੰਗ ਸਿਸਟਮ \n"
"ਤੌਰ ਤੇ ਵਰਤਣ ਦੇ ਯੋਗ ਹੋ।"
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"ਸਾਨੂੰ ਕੋਈ USB ਕੁੰਜੀ ਤੁਹਾਡੇ ਸਿਸਟਮ ਤੇ ਨਹੀਂ ਲੱਭੀ। ਜੇ ਤੁਸੀਂ\n"
"USB ਕੁੰਜੀ ਹੁਣ ਜੋੜ ਦਿੱਤੀ, Mandriva Move ਤੁਹਾਡੀ ਘਰ \n"
"ਡਾਇਰੈਕਟਰੀ ਵਿੱਚ ਡਾਟਾ ਪਾਰਦਰਸ਼ੀ ਹੀ ਸੰਭਾਲਣ ਦੇ ਯੋਗ ਹੈ ਅਤੇ \n"
"ਇਸ ਕੰਪਿਊਟਰ ਜਾ ਹੋਰ ਨੂੰ ਅਗਲੀ ਵਾਰ ਬੂਟ ਕਰਨ ਲਈ ਸਿਸਟਮ \n"
"ਲਈ ਸੰਰਚਨਾ। ਸੂਚਨਾ: ਜੇ ਤੁਸੀਂ ਹੁਣ ਕੁੰਜੀ ਜੋੜੀ, ਫਿਰ ਖੋਜ ਲਈ ਕੁਝ\n"
"ਸਕਿੰਟ ਉਡੀਕੋ।\n"
"\n"
"\n"
"ਤੁਸੀਂ USB ਕੁੰਜੀ ਤੋਂ ਬਿਨਾ ਜਾਰੀ ਕਰ ਸਕਦੇ ਹੋ - ਤੁਸੀਂ ਹਾਲੇ ਵੀ \n"
"Mandriva Move ਨੂੰ ਸਧਾਰਨ ਲਾਈਵ ਮੈਂਡਰਿਵ ਆਪਰੇਟਿੰਗ ਸਿਸਟਮ \n"
"ਤੌਰ ਤੇ ਵਰਤਣ ਦੇ ਯੋਗ ਹੋ।"
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "ਤੁਹਾਡਾ ਡਾਟਾ ਸੰਭਾਲਣ ਲਈ ਕੁੰਜੀ ਦੀ ਲੋੜ ਹੈ"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "USB ਕੁੰਜੀ ਮੁੜ ਖੋਜੋ"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "USB ਕੁੰਜੀ ਸਥਾਪਨ"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"ਕਿਰਪਾ ਕਰਕੇ ਉਡੀਕ ਕਰੋ, ਸਿਸਟਮ ਸੰਰਚਨਾ ਫਾਇਲਾਂ ਨੂੰ USB ਕੁੰਜੀ ਤੇ ਨਿਰਧਾਰਨ ਕੀਤਾ ਜਾਦਾ ਹੈ..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "ਪਰਦਾ ਤਸਵੀਰ ਲਈ ਵਰਤੋਂ ਲਈ ਉਪਭੋਗੀ ਜਾਣਕਾਰੀ, ਗੁਪਤ-ਕੋਡ ਦਿਓ"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "ਸਵੈ-ਸੰਰਚਨਾ"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਉਡੀਕ ਕਰੋ, ਜੰਤਰ ਖੋਜੇ ਅਤੇ ਸੰਰਚਿਤ ਕੀਤੇ ਜਾ ਰਹੇ ਹਨ..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
#: install_steps_interactive.pm:38 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:1013 network/netconnect.pm:1121
#: network/netconnect.pm:1125 network/netconnect.pm:1129
#: network/netconnect.pm:1134 network/netconnect.pm:1266
#: network/netconnect.pm:1270 network/netconnect.pm:1274
#: network/netconnect.pm:1278 network/netconnect.pm:1386
#: network/netconnect.pm:1391 network/netconnect.pm:1411
#: network/netconnect.pm:1622 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
#: standalone/drakTermServ:393 standalone/drakTermServ:467
#: standalone/drakTermServ:476 standalone/drakTermServ:771
#: standalone/drakTermServ:778 standalone/drakTermServ:801
#: standalone/drakTermServ:847 standalone/drakTermServ:1023
#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1643 standalone/drakbackup:1799
#: standalone/drakbackup:2413 standalone/drakbackup:4102
#: standalone/drakbackup:4322 standalone/drakclock:124
#: standalone/drakconnect:683 standalone/drakconnect:687
#: standalone/drakconnect:692 standalone/drakconnect:707
#: standalone/drakfloppy:297 standalone/drakfloppy:300
#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
#, c-format
msgid "Error"
msgstr "ਗਲਤੀ"
#: ../move/move.pm:605 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"ਗਲਤੀ ਹੋਈ ਹੈ, ਪਰ ਮੈਂ ਨਹੀਂ ਜਾਣਦਾ ਕਿ ਇਸ ਦਾ ਕਿਸ ਤਰਾਂ ਪ੍ਰਬੰਧਨ ਕਰਨਾ ਹੈ।\n"
"ਆਪਣੇ ਖਤਰੇ ਤੇ ਜਾਰੀ ਕਰੋ।"
#: ../move/move.pm:660 install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "ਇੱਕ ਗਲਤੀ ਆਈ ਹੈ"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"ਗਲਤੀ ਹੋਈ ਹੈ:\n"
"\n"
"\n"
"%s\n"
"\n"
"ਇਹ USB ਕੁੰਜੀ ਉੱਪਰ ਖਰਾਬ ਸਿਸਟਮ ਸੰਰਚਨਾ ਫਾਇਲਾਂ ਦਾ ਕਾਰਨ \n"
"ਹੋ ਸਕਦਾ ਹੈ, ਇਸ ਮੁੱਦੇ ਵਿੱਚ ਇਹਨਾਂ ਨੂੰ ਹਟਾਉਣ ਨਾਲ ਅਤੇ ਫਿਰ Mandriva \n"
"Move ਮੁੜ ਚਲਾਉਣ ਨਾਲ ਸਮੱਸਿਆ ਠੀਕ ਹੋ ਸਕਦੀ ਹੈ। ਅਜਿਹਾ ਕਰਨ ਲਈ,\n"
"ਅਨੁਸਾਰੀ ਬਟਨ ਦਬਾਓ।\n"
"\n"
"\n"
"ਤੁਹਾਨੂੰ ਮੁੜ ਚਲਾਉਣ ਅਤੇ USB ਕੁੰਜੀ ਹਟਾਉਣ, ਜਾਂ\n"
"ਹੋਰ OS ਦੇ ਅਧੀਨ ਇਸ ਦੇ ਸੰਖੇਪ ਪੜਤਾਲ ਕਰਨ ਦੀ, ਇੱਥੋਂ ਤੱਕ ਕਿ\n"
"ਕੀ ਵਾਪਰ ਰਿਹਾ ਹੈ ਵੇਖਣ ਲਈ ਕੰਸੋਲ #3 ਅਤੇ #4 ਵਿੱਚ ਲਾਗ ਫਾਇਲਾਂ \n"
"ਵੇਖਣ ਦੀ ਜਰੂਰਤ ਪੈ ਸਕਦੀ ਹੈ।"
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "ਸਿਸਟਮ config ਫਾਇਲਾਂ ਹਟਾਓ"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "ਮੁੜ-ਚਲਾਓ"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "ਤੁਸੀਂ ਸਿਰਫ ਬਿਨਾ CDROM ਸਹਿਯੋਗ ਤੋਂ ਚਲਾ ਸਕਦੇ ਹੋ"
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "ਉਹ ਪ੍ਰੋਗਰਾਮ ਬੰਦ ਕਰੋ"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "ਕੋਈ CDROM ਸਹਿਯੋਗ ਨਹੀਂ"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
#: diskdrake/interactive.pm:1102
#, c-format
msgid "Read carefully!"
msgstr "ਧਿਆਨ ਨਾਲ ਪੜੋ!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"ਤੁਸੀਂ CDROM ਵਰਤ ਨਹੀਂ ਸਕਦੇ ਜਦੋਂ ਹੇਠਲੇ ਪ੍ਰੋਗਰਾਮ ਚੱਲ ਰਹੇ ਹਨ: \n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "CDROM ਹਟਾਉਣ ਲਈ ਮੈਮੋਰੀ ਵਿੱਚ ਨਕਲ ਕਰ ਰਿਹਾ ਹੈ"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 ਕਿਬਾ"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 ਕਿਬਾ"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 ਮੈਬਾ"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 ਮੈਬਾ"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 ਮੈਬਾ"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 ਮੈਬਾ"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 ਮੈਬਾ"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 ਮੈਬਾ"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 ਮੈਬਾ ਜਾਂ ਵੱਧ"
#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "X ਸਰਵਰ"
#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "X ਸਰਵਰ ਚੁਣੋ"
#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr "ਬਹੁ-ਹੈੱਡ ਸੰਰਚਨਾ"
#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"ਤੁਹਾਡਾ ਸਿਸਟਮ ਬਹੁ ਹੈੱਡ ਸੰਰਚਨਾ ਨੂੰ ਸਹਿਯੋਗ ਦਿੰਦਾ ਹੈ।\n"
"ਤੁਸੀਂ ਕੀ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Xorg ਪੈਕੇਜ ਇੰਸਟਾਲ ਨਹੀਂ ਕਰ ਸਕਦਾ: %s"
#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "ਆਪਣੇ ਗਰਾਫਿਕਸ ਕਾਰਡ ਦਾ ਮੈਮੋਰੀ ਅਕਾਰ ਚੁਣੋ"
#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Xorg ਸੰਰਚਨਾ"
#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "ਤੁਸੀਂ Xorg ਦੀ ਕਿਹੜੀ ਸੰਰਚਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr "ਸਾਰੇ ਹੈੱਡ ਨਿਰਭਰਤਾ ਤੋਂ ਬਿਨਾ ਸੰਰਚਿਤ ਕਰੋ"
#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "Xinerama ਐਕਸਟੈਂਸ਼ਨ ਵਰਤੋ"
#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "ਸਿਰਫ ਕਾਰਡ \"%s\"%s ਹੀ ਸੰਰਚਿਤ ਕਰੋ"
#: Xconfig/card.pm:402 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:409 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "3D ਜੰਤਰ ਪ੍ਰਵੇਗ ਨਾਲ Xorg %s"
#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "ਤੁਹਾਡੇ ਕਾਰਡ ਨੂੰ Xorg %s ਨਾਲ 3D ਜੰਤਰ ਪ੍ਰਵੇਗ ਸਹਿਯੋਗ ਹੋ ਸਕਦਾ ਹੈ।"
#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "EXPERIMENTAL 3D ਜੰਤਰ ਪ੍ਰਵੇਗ ਨਾਲ Xorg %s"
#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"ਤੁਹਾਡੇ ਕਾਰਡ ਕੋਲ Xorg %s ਨਾਲ 3D ਜੰਤਰ ਪ੍ਰਵੇਗ ਸਹਿਯੋਗ ਹੋ ਸਕਦਾ ਹੈ,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER"
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
#, c-format
msgid "Custom"
msgstr "ਪਸੰਦ"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "ਬਾਹਰ"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "ਗਰਾਫਿਕਸ ਕਾਰਡ"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "ਮਾਨੀਟਰ"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
#, c-format
msgid "Resolution"
msgstr "ਰੈਜ਼ੋਲੇਸ਼ਨ"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "ਜਾਂਚ"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "ਚੋਣ"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "ਤੁਹਾਡੀ Xorg ਸੰਰਚਨਾ ਫਾਇਲ ਖਰਾਬ ਹੈ, ਅਸੀਂ ਇਸ ਨੂੰ ਰੱਦ ਕਰਾਂਗੇ।"
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"ਤਬਦੀਲੀਆਂ ਰੱਖੋ?\n"
"ਵਰਤਮਾਨ ਸੰਰਚਨਾ ਹੈ:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "ਹੈੱਡ #%d ਲਈ ਮਾਨੀਟਰ ਚੁਣੋ"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "ਮਾਨੀਟਰ ਚੁਣੋ"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "ਲਾਓ ਤੇ ਚਲਾਓ"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "ਵਿਆਪਕ"
#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
#: standalone/harddrake2:87
#, c-format
msgid "Vendor"
msgstr "ਵਿਕ੍ਰੇਤਾ"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "ਲਾਓ ਤੇ ਚਲਾਓ ਖੋਜ ਅਸਫਲ ਹੋਈ। ਕਿਰਪਾ ਕਰਕੇ ਠੀਕ ਮਾਨੀਟਰ ਚੁਣੋ"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"ਦੋ ਨਾਜ਼ੁਕ ਪੈਰਾਮੀਟਰ ਲੰਬਕਾਰੀ ਮੁੜ-ਤਾਜ਼ਾ ਦਰ ਹੈ, ਜੋ ਦਰ ਹੈ ਜਿਸ ਨਾਲ ਸਾਰਾ \n"
"ਪਰਦਾ ਮੁੜ-ਤਾਜ਼ਾ ਹੋ ਜਾਂਦਾ ਹੈ, ਅਤੇ ਜਿਆਦਾ ਜਰੂਰੀ ਖਤਿਜੀ ਦਰ, ਜਿਸ \n"
"ਨਾਲ ਜਾਂਚ-ਸਤਰਾਂ ਵਿਖਾਈਆਂ ਜਾਂਦੀਆਂ ਹਨ।\n"
"\n"
"ਇਹ *ਬਹੁਤ ਖਾਸ* ਹੈ, ਕਿ ਤੁਸੀਂ ਸਮਕਾਲੀ ਸੀਮਾ ਜੋ ਤੁਹਾਡੇ ਮਾਨੀਟਰ ਦੀ ਯੋਗਤਾ ਦੇ ਪਿੱਛੇ ਹੈ, \n"
"ਨਾਲ ਮਾਨੀਟਰ ਕਿਸਮ ਨਹੀਂ ਚੁਣੀ ਹੈ: ਤੁਸੀਂ ਆਪਣਾ ਮਾਨੀਟਰ ਖਰਾਬ ਕਰ ਸਕਦੇ ਹੋ।\n"
"ਜੇ ਕੋਈ ਸ਼ੱਕ ਹੈ, ਸੰਭਾਲ ਵਿਵਸਥਾ ਚੁਣੋ।"
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "ਖਤਿਜੀ ਮੁੜ-ਤਾਜ਼ਾ ਦਰ"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "ਲੰਬਕਾਰੀ ਮੁੜ-ਤਾਜ਼ਾ ਦਰ"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 ਰੰਗ (8 ਬਿੱਟ)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 ਹਜ਼ਾਰ ਰੰਗ (15 ਬਿੱਟ)"
#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 ਹਜ਼ਾਰ ਰੰਗ (16 ਬਿੱਟ)"
#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 ਮਿਲੀਅਨ ਰੰਗ (24 ਬਿੱਟ)"
#: Xconfig/resolution_and_depth.pm:129
#, c-format
msgid "Resolutions"
msgstr "ਰੈਜ਼ੋਲੇਸ਼ਨ"
#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1581 standalone/drakperm:251
#, c-format
msgid "Other"
msgstr "ਹੋਰ"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "ਰੈਜ਼ੋਲੂਸ਼ਨ ਅਤੇ ਰੰਗ ਡੂੰਘਾਈ ਚੁਣੋ"
#: Xconfig/resolution_and_depth.pm:360
#, c-format
msgid "Graphics card: %s"
msgstr "ਗਰਾਫਿਕਸ ਕਾਰਡ: %s"
#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:200 standalone/drakTermServ:518
#: standalone/drakbackup:1345 standalone/drakbackup:3959
#: standalone/drakbackup:4019 standalone/drakbackup:4063
#: standalone/drakconnect:166 standalone/drakconnect:885
#: standalone/drakconnect:972 standalone/drakconnect:1071
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
#, c-format
msgid "Ok"
msgstr "ਠੀਕ ਹੈ"
#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:217 standalone/drakbackup:1345
#: standalone/drakbackup:3885 standalone/drakbackup:3889
#: standalone/drakbackup:3947 standalone/drakconnect:165
#: standalone/drakconnect:970 standalone/drakconnect:1070
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
#: ugtk2.pm:908
#, c-format
msgid "Cancel"
msgstr "ਰੱਦ ਕਰੋ"
#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
#: standalone/drakbackup:3881 standalone/drakbug:104
#: standalone/drakconnect:161 standalone/drakconnect:246
#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1040 ugtk2.pm:1041
#, c-format
msgid "Help"
msgstr "ਸਹਾਇਤਾ"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "ਸੰਰਚਨਾ ਦੀ ਜਾਂਚ"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "ਕੀ ਤੁਸੀਂ ਸੰਰਚਨਾ ਦੀ ਜਾਂਚ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "ਚੇਤਾਵਨੀ: ਇਸ ਗਰਾਫਿਕਸ ਕਾਰਡ ਦੀ ਜਾਂਚ ਤੁਹਾਡੇ ਕੰਪਿਊਟਰ ਨੂੰ ਰੋਕ ਸਕਦੀ ਹੈ"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"ਗਲਤੀ ਹੋਈ ਹੈ:\n"
"%s\n"
"ਕੁਝ ਪੈਰਾਮੀਟਰ ਤਬਦੀਲ ਕਰਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰੋ"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "%d ਸਕਿੰਟਾਂ ਵਿੱਚ ਖਤਮ ਹੋ ਰਿਹਾ ਹੈ"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "ਕੀ ਇਹ ਠੀਕ ਵਿਵਸਥਾ ਹੈ?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "ਕੀਬੋਰਡ ਖਾਕਾ: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "ਮਾਊਸ ਕਿਸਮ: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "ਮਾਊਸ ਜੰਤਰ: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "ਮਾਨੀਟਰ: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "ਮਾਨੀਟਰ ਖਤਿਜੀ-ਸਮਾਕਾਲਤਾ: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "ਮਾਨੀਟਰ ਲੰਬਕਾਰੀ-ਮੁੜਤਾਜ਼ਾ: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "ਗਰਾਫਿਕਸ ਕਾਰਡ: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "ਗਰਾਫਿਕਸ ਮੈਮੋਰੀ: %s ਕਿਬਾ\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "ਰੰਗ ਡੂੰਘਾਈ: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "ਰੈਜ਼ੋਲੂਸ਼ਨ: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg ਡਰਾਈਵਰ: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "ਸ਼ੁਰੂਆਤੀ ਤੇ ਗਰਾਫੀਕਲ ਇੰਟਰਫੇਸ"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"ਇਹ ਤੁਹਾਡੇ ਕੰਪਿਊਟਰ ਨੂੰ ਗਰਾਫੀਕਲ ਇੰਟਰਫੇਸ (Xorg) ਨੂੰ ਬੂਟਿੰਗ ਦੌਰਾਨ ਸ਼ੁਰੂ ਕਰਨ ਲਈ ਨਿਰਧਾਰਿਤ ਕਰ ਸਕਦਾ "
"ਹੈ।\n"
"ਕੀ ਤੁਸੀਂ ਮੁੜ ਚਲਾਉਣ ਸਮੇਂ Xorg ਸ਼ੁਰੂ ਕਰਨਾ ਪਸੰਦ ਕਰਦੇ ਹੋ?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"ਤੁਹਾਡੇ ਗਰਾਫਿਕ ਕਾਰਡ ਵਿੱਚ TV-OUT ਕੁਨੈਕਟਰ ਜਾਪਦਾ ਹੈ।\n"
"ਇਹ ਫਰੇਮ-ਬਫਰ ਵਰਤ ਕੇ ਕੰਮ ਕਰਨ ਲਈ ਸੰਰਚਿਤ ਕੀਤਾ ਜਾ ਸਕਦਾ ਹੈ।\n"
"\n"
"ਇਹ ਲਈ ਤੁਹਾਨੂੰ ਕੰਪਿਊਟਰ ਬੂਟ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ ਆਪਣਾ ਗਰਾਫਿਕ ਕਾਰਡ ਆਪਣੇ TV ਨਾਲ ਜੋੜਨਾ ਪਵੇਗਾ।\n"
"ਫਿਰ ਬੂਟ-ਲੋਡਰ ਵਿੱਚ \"TVout\" ਇੰਦਰਾਜ ਚੁਣੋ\n"
"\n"
"ਕੀ ਤੁਹਾਡੇ ਕੋਲ ਇਹ ਵਿਸ਼ੇਸ਼ਤਾ ਹੈ?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "ਤੁਹਾਡਾ TV ਕਿਹੜਾ norm ਵਰਤ ਰਿਹਾ ਹੈ?"
#: Xconfig/xfree.pm:630
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
#: standalone/service_harddrake:203
#, c-format
msgid "Please wait"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਉਡੀਕੋ"
#: any.pm:143
#, c-format
msgid "Bootloader installation in progress"
msgstr "ਬੂਟ-ਲੋਡਰ ਇੰਸਟਾਲੇਸ਼ਨ ਹੋ ਰਹੀ ਹੈ"
#: any.pm:154
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO ਡਰਾਈਵ %s ਨੂੰ ਨਵਾਂ ਵਾਲਿਅਮ ID ਨਿਰਧਾਰਿਤ ਕਰਨਾ ਚਾਹੁੰਦਾ ਹੈ। ਭਾਵੇਂ, \n"
"Windows NT, 2000, ਜਾਂ XP ਬੂਟ ਡਿਸਕ ਤਬਦੀਲ ਕਰਨੀ ਖਤਰਨਾਕ Windows ਗਲਤੀ ਹੈ।\n"
"ਇਹ ਸਾਵਧਾਨੀ Windows 95 ਜਾਂ 98, ਜਾਂ NT ਡਾਟਾ ਡਿਸਕ ਨੂੰ ਲਾਗੂ ਨਹੀਂ ਕੀਤੀ ਜਾ ਸਕਦੀ।\n"
"\n"
"ਨਵਾਂ ਵਾਲਿਅਮ ID ਨਿਰਧਾਰਿਤ ਕਰੋ?"
#: any.pm:165
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "ਬੂਟ-ਲੋਡਰ ਇੰਸਟਾਲੇਸ਼ਨ ਅਸਫਲ ਹੋਈ। ਹੇਠਲੀ ਗਲਤੀ ਹੋਈ ਹੈ:"
#: any.pm:171
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"ਤੁਹਾਨੂੰ ਬੂਟ-ਲੋਡਰ ਯੋਗ ਕਰਨ ਲਈ ਆਪਣਾ Open Firmware ਬੂਟ-ਜੰਤਰ ਤਬਦੀਲ \n"
"ਕਰਨ ਦੀ ਜਰੂਰਤ ਪੈ ਸਕਦੀ ਹੈ। ਜੇ ਤੁਸੀਂ ਮੁੜ ਚਲਾਉਣ ਤੇ ਬੂਟ-ਲੋਡਰ ਪਰੌਂਪਟ ਨਹੀਂ \n"
"ਵੇਖਦੇ, ਮੁੜ ਚੱਲਣ ਤੇ Command-Option-O-F ਦਬਾ ਕੇ ਰੱਖੋ ਅਤੇ ਇਹ ਭਰੋ:\n"
" setenv boot-device %s,\\\\:tbxi\n"
"ਫਿਰ ਲਿਖੋ:shut-down\n"
"ਅਗਲੀ ਬੂਟ ਤੇ ਤੁਹਾਨੂੰ ਬੂਟ-ਲੋਡਰ ਪਰੌਂਪਟ ਦਿਸਣਾ ਚਾਹੀਦਾ ਹੈ।"
#: any.pm:209
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"ਤੁਸੀਂ ਇੱਕ ਭਾਗ ਤੇ ਬੂਟ-ਲੋਡਰ ਇੰਸਟਾਲ ਕਰਨ ਬਾਰੇ ਫੈਸਲਾ ਕੀਤਾ ਹੈ।\n"
"ਇਹ ਦੱਸਦਾ ਹੈ ਕਿ ਤੁਹਾਡੇ ਕੋਲ ਪਹਿਲਾਂ ਹੀ ਬੂਟ ਕੀਤੀ ਹਾਰਡ ਡਰਾਈਵ ਤੇ ਬੂਟ-ਲੋਡਰ ਹੈ (ਜਿਵੇਂ: ਸਿਸਟਮ "
"ਕਮਾਂਡਰ)।\n"
"\n"
"ਤੁਸੀਂ ਕਿਸ ਡਰਾਈਵ ਤੋਂ ਬੂਟ ਕਰਾ ਰਹੇ ਹੋ?"
#: any.pm:232 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "ਡਰਾਈਵ ਦਾ ਪਹਿਲਾ ਹਿੱਸਾ (MBR)"
#: any.pm:233
#, c-format
msgid "First sector of the root partition"
msgstr "root ਭਾਗ ਦਾ ਪਹਿਲਾ ਹਿੱਸਾ"
#: any.pm:235
#, c-format
msgid "On Floppy"
msgstr "ਫਲਾਪੀ ਤੇ"
#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "ਛੱਡੋ"
#: any.pm:241
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub ਇੰਸਟਾਲੇਸ਼ਨ"
#: any.pm:242
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "ਤੁਸੀ ਬੂਟ-ਲੋਡਰ ਕਿੱਥੇ ਇੰਸਟਾਲ ਕਰਨਾ ਚਾਹੋਗੇ?"
#: any.pm:268 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "ਬੂਟ ਸ਼ੈਲੀ ਸੰਰਚਨਾ"
#: any.pm:270 any.pm:302
#, c-format
msgid "Bootloader main options"
msgstr "ਬੂਟ-ਲੋਡਰ ਮੁੱਖ ਚੋਣ"
#: any.pm:274
#, c-format
msgid "Give the ram size in MB"
msgstr "ਮੈਬਾ ਵਿੱਚ ਰੈਮ ਅਕਾਰ ਦਿਓ"
#: any.pm:276
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "ਚੋਣ ``ਕਮਾਂਡ ਲਾਈਨ ਚੋਣ ਮਨਾਹੀ'' ਦਾ ਗੁਪਤ-ਕੋਡ ਤੋਂ ਬਿਨਾ ਕੋਈ ਮਤਲਬ ਨਹੀਂ"
#: any.pm:277 any.pm:610 authentication.pm:182
#, c-format
msgid "The passwords do not match"
msgstr "ਗੁਪਤ-ਕੋਡ ਮੇਲ ਨਹੀਂ ਖਾਂਦਾ"
#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
#, c-format
msgid "Please try again"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਫਿਰ ਕੋਸ਼ਿਸ਼ ਕਰੋ"
#: any.pm:282 any.pm:305
#, c-format
msgid "Bootloader to use"
msgstr "ਵਰਤਣ ਲਈ ਬੂਟ-ਲੋਡਰ"
#: any.pm:284 any.pm:307
#, c-format
msgid "Boot device"
msgstr "ਬੂਟ ਜੰਤਰ"
#: any.pm:286
#, c-format
msgid "Delay before booting default image"
msgstr "ਮੂਲ ਪ੍ਰਤੀਬਿੰਬ ਬੂਟ ਹੋਣ ਤੋਂ ਪਹਿਲਾਂ ਵਿਖਾਓ"
#: any.pm:287
#, c-format
msgid "Enable ACPI"
msgstr "ACPI ਯੋਗ ਕਰੋ"
#: any.pm:289
#, c-format
msgid "Force no APIC"
msgstr "ਕੋਈ APIC ਨਾ ਹੋਣ ਲਈ ਮਜਬੂਰ ਕਰੋ"
#: any.pm:291
#, c-format
msgid "Force No Local APIC"
msgstr "ਕੋਈ ਲੋਕਲ APIC ਨਾ ਹੋਣ ਲਈ ਮਜਬੂਰ ਕਰੋ"
#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:688 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
#: standalone/drakbackup:3488 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "ਗੁਪਤ-ਕੋਡ"
#: any.pm:294 any.pm:638 authentication.pm:188
#, c-format
msgid "Password (again)"
msgstr "ਗੁਪਤ-ਕੋਡ (ਫਿਰ)"
#: any.pm:295
#, c-format
msgid "Restrict command line options"
msgstr "ਕਮਾਂਡ ਲਾਈਨ ਚੋਣ ਮਨਾਹੀ"
#: any.pm:295
#, c-format
msgid "restrict"
msgstr "ਮਨਾਹੀ"
#: any.pm:297
#, c-format
msgid "Clean /tmp at each boot"
msgstr "ਹਰੇਕ ਬੂਟ ਦੌਰਾਨ /tmp ਸਾਫ ਕਰੋ"
#: any.pm:298
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "ਜੇ ਲੋੜ ਹੈ RAM ਅਕਾਰ ਠੀਕ ਕਰੋ (%d ਮੈਬਾ ਲੱਭਿਆ ਹੈ)"
#: any.pm:306
#, c-format
msgid "Init Message"
msgstr "Init ਸੁਨੇਹਾ"
#: any.pm:308
#, c-format
msgid "Open Firmware Delay"
msgstr "ਫਰਮਵੇਅਰ ਦ੍ਰਿਸ਼ ਖੋਲੋ"
#: any.pm:309
#, c-format
msgid "Kernel Boot Timeout"
msgstr "ਕਰਨਲ ਬੂਟ ਮਿਆਦ"
#: any.pm:310
#, c-format
msgid "Enable CD Boot?"
msgstr "CD ਬੂਟ ਯੋਗ?"
#: any.pm:311
#, c-format
msgid "Enable OF Boot?"
msgstr "OF ਬੂਟ ਯੋਗ?"
#: any.pm:312
#, c-format
msgid "Default OS?"
msgstr "ਮੂਲ OS?"
#: any.pm:365
#, c-format
msgid "Image"
msgstr "ਚਿੱਤਰ"
#: any.pm:366 any.pm:376
#, c-format
msgid "Root"
msgstr "ਰੂਟ"
#: any.pm:367 any.pm:389
#, c-format
msgid "Append"
msgstr "ਜੋੜਨਾ"
#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "ਵੀਡੀਓ ਵਿਧੀ"
#: any.pm:371
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:372
#, c-format
msgid "Network profile"
msgstr "ਨੈੱਟਵਰਕ ਪਰੋਫਾਈਲ"
#: any.pm:381 any.pm:386 any.pm:388
#, c-format
msgid "Label"
msgstr "ਲੇਬਲ"
#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "ਮੂਲ"
#: any.pm:390
#, c-format
msgid "Initrd-size"
msgstr "Initrd-ਅਕਾਰ"
#: any.pm:392
#, c-format
msgid "NoVideo"
msgstr "ਕੋਈ ਵੀਡੀਓ ਨਹੀਂ"
#: any.pm:403
#, c-format
msgid "Empty label not allowed"
msgstr "ਖਾਲੀ ਲੇਬਲ ਦੀ ਇਜਾਜ਼ਤ ਨਹੀਂ"
#: any.pm:404
#, c-format
msgid "You must specify a kernel image"
msgstr "ਤੁਹਾਨੂੰ ਕਰਨਲ ਪ੍ਰਤੀਬਿੰਬ ਦਰਸਾਉਣਾ ਜਰੂਰੀ ਹੈ"
#: any.pm:404
#, c-format
msgid "You must specify a root partition"
msgstr "ਤੁਹਾਨੂੰ ਰੂਟ ਭਾਗ ਦਰਸਾਉਣਾ ਜਰੂਰੀ ਹੈ"
#: any.pm:405
#, c-format
msgid "This label is already used"
msgstr "ਇਹ ਲੇਬਲ ਪਹਿਲਾਂ ਹੀ ਵਰਤਿਆ ਹੈ"
#: any.pm:419
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "ਤੁਸੀਂ ਕਿਸ ਕਿਸਮ ਦੀ ਇੰਦਰਾਜ ਸ਼ਾਮਿਲ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ?"
#: any.pm:420
#, c-format
msgid "Linux"
msgstr "ਲੀਨਕਸ"
#: any.pm:420
#, c-format
msgid "Other OS (SunOS...)"
msgstr "ਹੋਰ OS (SunOS...)"
#: any.pm:421
#, c-format
msgid "Other OS (MacOS...)"
msgstr "ਹੋਰ OS (MacOS...)"
#: any.pm:421
#, c-format
msgid "Other OS (Windows...)"
msgstr "ਹੋਰ OS (Windows...)"
#: any.pm:449
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"ਇੱਥੇ ਤੁਹਾਡੇ ਬੂਟ ਮੇਨੂ ਉਪਰਲੀਆਂ ਇੰਦਰਾਜਾਂ ਹਨ।\n"
"ਤੁਸੀਂ ਵਾਧੂ ਇੰਦਰਾਜਾਂ ਬਣਾ ਜਾਂ ਮੌਜੂਦ ਨੂੰ ਤਬਦੀਲ ਕਰ ਸਕਦੇ ਹੋ।"
#: any.pm:596
#, c-format
msgid "access to X programs"
msgstr "X ਪ੍ਰੋਗਰਾਮਾਂ ਨੂੰ ਪਹੁੰਚ"
#: any.pm:597
#, c-format
msgid "access to rpm tools"
msgstr "rpm ਸੰਦਾਂ ਨੂੰ ਪਹੁੰਚ"
#: any.pm:598
#, c-format
msgid "allow \"su\""
msgstr "\"su\" ਲਾਗੂ ਕਰੋ"
#: any.pm:599
#, c-format
msgid "access to administrative files"
msgstr "ਪ੍ਰਬੰਧਕੀ ਫਾਇਲਾਂ ਨੂੰ ਪਹੁੰਚ"
#: any.pm:600
#, c-format
msgid "access to network tools"
msgstr "ਨੈੱਟਵਰਕ ਸੰਦਾਂ ਨੂੰ ਪਹੁੰਚ"
#: any.pm:601
#, c-format
msgid "access to compilation tools"
msgstr "ਕੰਪਾਇਲੇਸਨ ਸੰਦਾਂ ਨੂੰ ਪਹੁੰਚ"
#: any.pm:606
#, c-format
msgid "(already added %s)"
msgstr "(%s ਪਹਿਲਾਂ ਸ਼ਾਮਿਲ ਹੈ)"
#: any.pm:611
#, c-format
msgid "This password is too simple"
msgstr "ਇਹ ਗੁਪਤ-ਕੋਡ ਬਹੁਤ ਸੌਖਾ ਹੈ"
#: any.pm:612
#, c-format
msgid "Please give a user name"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਉਪਭੋਗੀ ਨਾਂ ਦਿਓ"
#: any.pm:613
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ਉਪਭੋਗੀ ਨਾਂ ਵਿੱਚ ਸਿਰਫ ਛੋਟੇ ਅੱਖਰ, ਅੰਕ, `-' ਅਤੇ `_' ਸ਼ਾਮਿਲ ਹੋਣੇ ਜਰੂਰੀ ਹਨ"
#: any.pm:614
#, c-format
msgid "The user name is too long"
msgstr "ਉਪਭੋਗੀ ਨਾਂ ਬਹੁਤ ਲੰਬਾ ਹੈ"
#: any.pm:615
#, c-format
msgid "This user name has already been added"
msgstr "ਇਹ ਉਪਭੋਗੀ ਨਾਂ ਪਹਿਲਾ ਹੀ ਸ਼ਾਮਿਲ ਹੈ"
#: any.pm:619
#, c-format
msgid "Add user"
msgstr "ਉਪਭੋਗੀ ਸ਼ਾਮਿਲ"
#: any.pm:620
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ਉਪਭੋਗੀ ਭਰੋ\n"
"%s"
#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
#: standalone/drakbackup:2701 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "ਸਮਾਪਤ"
#: any.pm:624 help.pm:51
#, c-format
msgid "Accept user"
msgstr "ਉਪਭੋਗੀ ਸਵੀਕਾਰ"
#: any.pm:635
#, c-format
msgid "Real name"
msgstr "ਅਸਲੀ ਨਾਂ"
#: any.pm:636 standalone/drakbackup:1620
#, c-format
msgid "Login name"
msgstr "ਲਾਗਇਨ ਨਾਂ"
#: any.pm:639
#, c-format
msgid "Shell"
msgstr "ਸ਼ੈਲ"
#: any.pm:641
#, c-format
msgid "Icon"
msgstr "ਆਈਕਾਨ"
#: any.pm:688 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "ਸਵੈ-ਲਾਗਇਨ"
#: any.pm:689
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "ਮੈਂ ਤੁਹਾਡੇ ਕੰਪਿਊਟਰ ਇੱਕ ਉਪਭੋਗੀ ਦੇ ਸਵੈ-ਲਾਗਇਨ ਹੋਣ ਲਈ ਨਿਰਧਾਰਿਤ ਕਰ ਸਕਦਾ ਹਾਂ।"
#: any.pm:690 help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "ਕੀ ਤੁਸੀਂ ਇਹ ਵਿਸ਼ੇਸ਼ਤਾ ਵਰਤਣੀ ਚਾਹੁੰਦੇ ਹੋ?"
#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
#: wizards.pm:156 wizards2.pm:158
#, c-format
msgid "Yes"
msgstr "ਹਾਂ"
#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
#, c-format
msgid "No"
msgstr "ਨਹੀਂ"
#: any.pm:692
#, c-format
msgid "Choose the default user:"
msgstr "ਮੂਲ ਉਪਭੋਗੀ ਚੁਣੋ:"
#: any.pm:693
#, c-format
msgid "Choose the window manager to run:"
msgstr "ਚਲਾਉਣ ਲਈ ਝਰੋਖਾ ਪ੍ਰਬੰਧਕ ਚੁਣੋ:"
#: any.pm:706
#, c-format
msgid "Please choose a language to use."
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਵਰਤਣ ਲਈ ਬੋਲੀ ਚੁਣੋ।"
#: any.pm:707
#, c-format
msgid "Language choice"
msgstr "ਬੋਲੀ ਚੋਣ"
#: any.pm:733
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"ਮੈਂਡਰਿਵ-ਲੀਨਕਸ ਕਈ ਬੋਲੀਆਂ ਨੂੰ ਸਹਿਯੋਗ ਦੇ ਸਕਦਾ ਹੈ। ਭਾਸ਼ਾ ਜੋ\n"
"ਤੁਸੀਂ ਇੰਸਟਾਲ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ ਚੁਣੋ। ਇਹ ਉਪਲੱਬਧ ਹੋਣਗੇ ਜਦੋਂ ਤੁਹਾਡੀ\n"
"ਇੰਸਟਾਲੇਸ਼ਨ ਸਮਾਪਤ ਹੋ ਗਈ ਅਤੇ ਆਪਣਾ ਸਿਸਟਮ ਸਿਸਟਮ ਮੁੜ ਚਲਾਇਆ।"
#: any.pm:752 any.pm:773 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "ਮੂਲ ਹੀ ਯੂਨੀਕੋਡ ਵਰਤੋ"
#: any.pm:753 help.pm:647
#, c-format
msgid "All languages"
msgstr "ਸਭ ਬੋਲੀਆਂ"
#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
#, c-format
msgid "Country / Region"
msgstr "ਦੇਸ਼ / ਖੇਤਰ"
#: any.pm:795
#, c-format
msgid "Please choose your country."
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਆਪਣਾ ਦੇਸ਼ ਚੁਣੋ।"
#: any.pm:797
#, c-format
msgid "Here is the full list of available countries"
msgstr "ਇੱਥੇ ਉਪਲੱਬਧ ਦੇਸ਼ਾਂ ਦੀ ਪੂਰੀ ਸੂਚੀ ਹੈ"
#: any.pm:798
#, c-format
msgid "Other Countries"
msgstr "ਹੋਰ ਦੇਸ਼"
#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:394
#, c-format
msgid "Advanced"
msgstr "ਤਕਨੀਕੀ"
#: any.pm:806
#, c-format
msgid "Input method:"
msgstr "ਇੰਪੁੱਟ ਵਿਧੀ:"
#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
#: network/netconnect.pm:380 network/netconnect.pm:385
#: network/netconnect.pm:1377 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "ਕੋਈ ਨਹੀਂ"
#: any.pm:921
#, c-format
msgid "No sharing"
msgstr "ਕੋਈ ਸ਼ੇਅਰਿੰਗ ਨਹੀਂ"
#: any.pm:921
#, c-format
msgid "Allow all users"
msgstr "ਸਭ ਉਪਭੋਗੀਆਂ ਨੂੰ ਇਜਾਜ਼ਤ ਦਿਓ"
#: any.pm:925
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"ਕੀ ਤੁਸੀਂ ਉਪਭੋਗੀਆਂ ਨੂੰ ਉਹਨਾਂ ਦੀਆਂ ਕੁਝ ਡਾਇਰੈਕਟਰੀਆਂ ਸ਼ੇਅਰ ਕਰਨ ਦੀ ਇਜਾਜ਼ਤ ਦਿਓਗੇ?\n"
"ਇਸ ਦੀ ਮਨਜੂਰੀ ਨਾਲ ਉਪਭੋਗੀ ਨੂੰ ਕੁਕਿਊਰਰ ਅਤੇ ਨਟਾਲਿਸ ਵਿੱਚ \"ਸ਼ੇਅਰ\" ਤੇ ਕਲਿੱਕ ਕਰਨ ਦੀ ਇਜਾਜ਼ਤ "
"ਹੋਵੇਗੀ।\n"
"\n"
"\n"
"\"ਪਸੰਦੀਦਾ\" ਪ੍ਰਤੀ-ਉਪਭੋਗੀ ਮਨਜੂਰੀ ਦਿੰਦਾ ਹੂ।\n"
#: any.pm:937
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr "NFS: ਵਾਧੂ ਪੁਰਾਣਾ ਯੂਨਿਕਸ ਫਾਇਲ ਸ਼ੇਅਰਿੰਗ ਸਿਸਟਮ, Mac ਅਤੇ Windows ਤੇ ਘੱਟ ਸਹਿਯੋਗ ਨਾਲ।"
#: any.pm:940
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: Windows ਦੁਆਰਾ ਵਰਤਿਆ ਫਾਇਲ ਸ਼ੇਅਰਿੰਗ ਸਿਸਟਮ, Mac OS X ਅਤੇ ਬਹੁਤੇ ਨਵੀਨ ਲੀਨਕਸ ਸਿਸਟਮ।"
#: any.pm:948
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "ਤੁਸੀਂ NFS ਜਾਂ SMB ਵਰਤ ਕੇ ਨਿਰਯਾਤ ਕਰ ਸਕਦੇ ਹੋ। ਕਿਰਪਾ ਕਰਕੇ ਚੁਣੋ ਤੁਸੀਂ ਵਰਤਣਾ ਚਾਹੁੰਦੇ ਹੋ।"
#: any.pm:973
#, c-format
msgid "Launch userdrake"
msgstr "userdrake ਚਲਾਓ"
#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "ਬੰਦ ਕਰੋ"
#: any.pm:975
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"ਪ੍ਰਤੀ-ਉਪਭੋਗੀ ਸ਼ੇਅਰਿੰਗ \"fileshare\" ਸਮੂਹ ਵਰਤਦਾ ਹੈ। ਤੁਸੀਂ ਇਸ \n"
"ਸਮੂਹ ਵਿੱਚ ਉਪਭੋਗੀ ਸ਼ਾਮਿਲ ਕਰਨ ਲਈ userdrake ਵਰਤ ਸਕਦੇ ਹੋ।"
#: authentication.pm:24
#, c-format
msgid "Local file"
msgstr "ਲੋਕਲ ਫਾਇਲ"
#: authentication.pm:25
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:26
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:27
#, c-format
msgid "Smart Card"
msgstr "ਸਮਾਰਟ ਕਾਰਡ"
#: authentication.pm:28 authentication.pm:153
#, c-format
msgid "Windows Domain"
msgstr "Windows ਡੋਮੇਨ"
#: authentication.pm:29
#, c-format
msgid "Active Directory with SFU"
msgstr "SFU ਨਾਲ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ"
#: authentication.pm:30
#, c-format
msgid "Active Directory with Winbind"
msgstr "Winbind ਨਾਲ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ"
#: authentication.pm:56
#, c-format
msgid "Local file:"
msgstr "ਲੋਕਲ ਫਾਇਲ:"
#: authentication.pm:56
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr "ਸਭ ਪ੍ਰਮਾਣਿਕਤਾ ਅਤੇ ਜਾਣਕਾਰੀ ਜੋ ਉਪਭੋਗੀ ਲੋਕਲ ਫਾਇਲ ਵਿੱਚ ਦੱਸਦਾ ਹੈ ਲਈ ਲੋਕਲ ਵਰਤੋ"
#: authentication.pm:57
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:57
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"ਆਪਣੇ ਕੰਪਿਊਟਰ ਨੂੰ ਕੁਝ ਜਾਂ ਸਾਰੀਆਂ ਪ੍ਰਮਾਣਿਕਤਾ ਲਈ LDAP ਵਰਤਣ ਲਈ ਦੱਸੋ। LDAP ਤੁਹਾਡੀ ਸੰਗਠਨ ਵਿਚਲੀ "
"ਜਾਣਕਾਰੀ ਦੀਆਂ ਕੁਝ ਕਿਸਮਾਂ ਇਕੱਠੀਆਂ ਕਰਦਾ ਹੈ।"
#: authentication.pm:58
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:58
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"ਤੁਹਾਨੂੰ ਇੱਕੋ ਨੈੱਟਵਰਕ ਜਾਣਕਾਰੀ ਸੇਵਾ ਡੋਮੇਨ ਵਿੱਚ ਸਾਂਝੇ ਗੁਪਤ-ਕੋਡ ਅਤੇ ਸਮੂਹ ਫਾਇਲ ਨਾਲ ਕੰਪਿਊਟਰਾਂ ਦੇ ਸਮੂਹ ਨੂੰ "
"ਚਲਾਉਣ ਦੀ ਇਜਾਜ਼ਤ ਦਿੰਦਾ ਹੈ।"
#: authentication.pm:59
#, c-format
msgid "Windows Domain:"
msgstr "Windows ਡੋਮੇਨ:"
#: authentication.pm:59
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"Winbind ਸਿਸਟਮ ਨੂੰ Windows ਡੋਮੇਨ ਵਿੱਚ ਜਾਣਕਾਰੀ ਅਤੇ ਪ੍ਰਮਾਣਿਕਤਾ ਉਪਭੋਗੀ ਮੁੜ-ਪ੍ਰਾਪਤ ਕਰਨ ਦੀ "
"ਇਜਾਜ਼ਤ ਦਿੰਦਾ ਹੈ।"
#: authentication.pm:60
#, c-format
msgid "Active Directory with SFU:"
msgstr "SFU ਨਾਲ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ:"
#: authentication.pm:60 authentication.pm:61
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr "Kerberos ਨੈੱਟਵਰਕ ਪ੍ਰਮਾਣਿਕਤਾ ਸੇਵਾ ਮੁਹੱਈਆ ਕਰਨ ਲਈ ਸੁਰੱਖਿਅਤ ਸਿਸਟਮ ਹੈ।"
#: authentication.pm:61
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Winbind ਨਾਲ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ:"
#: authentication.pm:86
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP ਪ੍ਰਮਾਣਿਕਤਾ"
#: authentication.pm:87
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP ਮੁੱਢਲਾ dn"
#: authentication.pm:88 share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "LDAP ਸਰਵਰ"
#: authentication.pm:101 fsedit.pm:21
#, c-format
msgid "simple"
msgstr "ਸਧਾਰਨ"
#: authentication.pm:102
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:103
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:104
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "ਸੁਰੱਖਿਆ ਖਾਕਾ (SASL/Kerberos)"
#: authentication.pm:111 authentication.pm:149
#, c-format
msgid "Authentication Active Directory"
msgstr "ਪ੍ਰਮਾਣਿਕਤਾ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ"
#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "ਡੋਮੇਨ"
#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:81
#: standalone/drakTermServ:270
#, c-format
msgid "Server"
msgstr "ਸਰਵਰ"
#: authentication.pm:115
#, c-format
msgid "LDAP users database"
msgstr "LDAP ਉਪਭੋਗੀ ਡਾਟਾਬੇਸ"
#: authentication.pm:116
#, c-format
msgid "Use Anonymous BIND "
msgstr "ਨਕਲੀ BIND ਵਰਤੋ"
#: authentication.pm:117
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "LDAP ਉਪਭੋਗੀ ਨੂੰ ਸਰਗਰਮ ਡਾਇਰੈਕਟਰੀ ਵੇਖਣ ਦੀ ਇਜਾਜ਼ਤ ਹੈ"
#: authentication.pm:118
#, c-format
msgid "Password for user"
msgstr "ਉਪਭੋਗੀ ਲਈ ਗੁਪਤ-ਕੋਡ"
#: authentication.pm:119
#, c-format
msgid "Encryption"
msgstr "ਇਕ੍ਰਿਪਸ਼ਨ"
#: authentication.pm:130
#, c-format
msgid "Authentication NIS"
msgstr "ਪ੍ਰਮਾਣਕਿਤਾ NIS"
#: authentication.pm:131
#, c-format
msgid "NIS Domain"
msgstr "NIS ਡੋਮੇਨ"
#: authentication.pm:132
#, c-format
msgid "NIS Server"
msgstr "NIS ਸਰਵਰ"
#: authentication.pm:137
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"ਇਸ ਨੂੰ W2K PDC ਲਈ ਕੰਮ ਕਰਨ ਲਈ, ਤੁਹਾਨੂੰ ਸੰਭਾਵੀ ਹੀ admin ਚਲਾਉਣ ਦੀ ਲੋੜ ਪਵੇਗੀ: C:\\>ਨੈੱਟ ਲੋਕਲ-"
"ਗਰੁੱਪ \"Pre-Windows 2000 ਅਨੁਕੂਲ ਪਹੁੰਚ\" ਹਰੇਕ ਸਰਵਰ ਨੂੰ /ਸ਼ਾਮਿਲ ਅਤੇ ਮੁੜ ਚਲਾਉਂਦਾ ਹੈ।\n"
"ਤੁਹਾਨੂੰ Windows(TM) ਡੋਮੇਨ ਨਾਲ ਮਸ਼ੀਨ ਜੋੜਨ ਲਈ ਡੋਮੇਨ Admin ਦੇ ਉਪਭੋਗੀ-ਨਾਂ/ਗੁਪਤ-ਕੋਡ ਦੀ ਲੋੜ "
"ਪਵੇਗੀ।\n"
"ਜੇ ਹਾਲੇ ਨੈੱਟਵਰਕਿੰਗ ਯੋਗ ਨਹੀਂ, Drakx ਨੈੱਟਵਰਕ ਨਿਰਧਾਰਨ ਪਗ਼ ਤੋਂ ਬਾਅਦ ਜੋੜਨ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰੇਗਾ।\n"
"ਕੀ ਇਹ ਪਗ਼ ਕੁਝ ਕਾਰਨਾ ਕਰਕੇ ਅਸਫਲ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ ਅਤੇ ਡੋਮੇਨ ਪ੍ਰਮਾਣਿਕਤਾ ਕੰਮ ਨਹੀਂ ਕਰਦੀ, ਸਿਸਟਮ "
"ਬੂਟ ਹੋਣ ਮਗਰੋਂ ਆਪਣੇ Windows(tm) ਡੋਮੇਨ, ਅਤੇ Admin ਉਪਭੋਗੀ-ਨਾਂ/ਗੁਪਤ-ਕੋਡ ਵਰਤ ਕੇ 'smbpasswd -j "
"DOMAIN -U USER%%PASSWORD' ਚਲਾਓ।\n"
"ਕਮਾਂਡ 'wbinfo -t' ਜਾਂਚ ਕਰੇਗੀ ਕਿ ਕੀ ਤੁਹਾਡੀ ਪ੍ਰਮਾਣਿਕਤਾ ਸਹੀ ਹੈ ਜਾਂ ਨਹੀਂ।"
#: authentication.pm:149
#, c-format
msgid "Authentication Windows Domain"
msgstr "ਪ੍ਰਮਾਣਿਕਤਾ Windows ਡੋਮੇਨ"
#: authentication.pm:154
#, c-format
msgid "Domain Admin User Name"
msgstr "ਡੋਮੇਨ ਪ੍ਰਬੰਧਕ ਉਪਭੋਗੀ ਨਾਂ"
#: authentication.pm:155
#, c-format
msgid "Domain Admin Password"
msgstr "ਡੋਮੇਨ ਪ੍ਰਬੰਧਕ ਗੁਪਤ-ਕੋਡ"
#: authentication.pm:156
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr "UID/SID ਸੰਭਾਲ ਲਈ Idmap ਵਰਤੋ"
#: authentication.pm:157
#, c-format
msgid "Default Idmap "
msgstr "ਮੂਲ Idmap"
#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr "ਪ੍ਰਬੰਧਕ (root) ਗੁਪਤ-ਕੋਡ ਅਤੇ ਨੈੱਟਵਰਕ ਪ੍ਰਮਾਣਿਕਤਾ ਵਿਧੀ ਨਿਰਧਾਰਿਤ ਕਰੋ"
#: authentication.pm:172
#, c-format
msgid "Set administrator (root) password"
msgstr "ਪ੍ਰਬੰਧਕ (root) ਗੁਪਤ-ਕੋਡ ਨਿਰਧਾਰਿਤ ਕਰੋ"
#: authentication.pm:173 standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "ਪ੍ਰਮਾਣਿਕਤਾ ਵਿਧੀ"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:178 help.pm:722
#, c-format
msgid "No password"
msgstr "ਕੋਈ ਗੁਪਤ-ਕੋਡ ਨਹੀਂ"
#: authentication.pm:184
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "ਇਹ ਗੁਪਤ-ਕੋਡ ਬਹੁਤ ਛੋਟਾ ਹੈ (ਇਹ ਘੱਟੋ-ਘੱਟ %d ਅੱਖਰਾਂ ਦਾ ਹੋਵੇ)"
#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
#, c-format
msgid "Authentication"
msgstr "ਪ੍ਰਮਾਣਿਕਤਾ"
#: authentication.pm:302
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "ਕੋਈ ਨਾ NIS ਡੋਮੇਨ ਨਾਲ ਬਰਾਡਕਾਸਟ ਨਹੀਂ ਵਰਤ ਸਕਦਾ"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:751
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"ਆਪਰਟਿੰਗ ਸਿਸਟਮ ਚੋਣਕਾਰ ਵੱਲੋਂ ਜੀ ਆਇਆਂ ਨੂੰ!\n"
"\n"
"ਉਪਰਲੀ ਸੂਚੀ ਵਿੱਚੋਂ ਆਪਰੇਟਿੰਗ ਸਿਸਟਮ ਚੁਣੋ ਜਾਂ\n"
"ਮੂਲ ਬੂਟ ਲਈ ਉਡੀਕ ਕਰੋ।\n"
"\n"
#: bootloader.pm:851
#, c-format
msgid "LILO with graphical menu"
msgstr "ਗਰਾਫੀਕਲ ਮੇਨੂ ਨਾਲ LILO"
#: bootloader.pm:852
#, c-format
msgid "LILO with text menu"
msgstr "ਪਾਠ ਮੇਨੂ ਨਾਲ LILO"
#: bootloader.pm:853
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:854
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:925
#, c-format
msgid "not enough room in /boot"
msgstr "/boot ਵਿੱਚ ਲੋੜੀਂਦੀ ਥਾਂ ਨਹੀਂ ਹੈ"
#: bootloader.pm:1374
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "ਤੁਸੀਂ %s ਭਾਗ ਤੇ ਬੂਟ ਲੋਡਰ ਇੰਸਟਾਲ ਨਹੀਂ ਕਰ ਸਕਦੇ\n"
#: bootloader.pm:1408
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"ਤੁਹਾਡੀ ਬੂਟ-ਲੋਡਰ ਸੰਰਚਨਾ ਦਾ ਨਵੀਨੀਕਰਨ ਹੋਣਾ ਜਰੂਰੀ ਹੈ ਕਿਉਂਕਿ ਭਾਗ ਮੁੜ ਅੰਕਿਤ ਕੀਤਾ ਜਾਂਦਾ ਹੈ।"
#: bootloader.pm:1421
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"ਬੂਟ-ਲੋਡਰ ਠੀਕ ਤਰਾਂ ਇੰਸਟਾਲ ਕੀਤਾ ਜਾ ਸਕਦਾ ਹੈ। ਤੁਹਾਨੂੰ ਸੰਕਟ-ਕਾਲੀਨ ਚਲਾਉਣਾ ਪਵੇਗਾ ਅਤੇ \"%s\" ਚੁਣੋ।"
#: bootloader.pm:1422
#, c-format
msgid "Re-install Boot Loader"
msgstr "ਬੂਟ ਲੋਡਰ ਮੁੜ ਇੰਸਟਾਲ ਕਰੋ"
#: common.pm:139
#, c-format
msgid "KB"
msgstr "ਕਿਬਾ"
#: common.pm:139
#, c-format
msgid "MB"
msgstr "ਮੈਬਾ"
#: common.pm:139
#, c-format
msgid "GB"
msgstr "ਗੀਬਾ"
#: common.pm:147
#, c-format
msgid "TB"
msgstr "ਟੈਬਾ"
#: common.pm:155
#, c-format
msgid "%d minutes"
msgstr "%d ਮਿੰਟ"
#: common.pm:157
#, c-format
msgid "1 minute"
msgstr "1 ਮਿੰਟ"
#: common.pm:159
#, c-format
msgid "%d seconds"
msgstr "%d ਸਕਿੰਟ"
#: common.pm:261
#, c-format
msgid "kdesu missing"
msgstr "kdesu ਗੁੰਮ ਹੈ"
#: common.pm:264
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper ਗੁੰਮ ਹੈ"
#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "ਆਸਟਰੀਆ"
#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "ਅਸਟਰੇਲੀਆ"
#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:51
#, c-format
msgid "Belgium"
msgstr "ਬੈਲਜੀਅਮ"
#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "ਬਰਾਜ਼ੀਲ"
#: crypto.pm:18 crypto.pm:52 lang.pm:230
#, c-format
msgid "Canada"
msgstr "ਕੈਨੇਡਾ"
#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
#, c-format
msgid "Switzerland"
msgstr "ਸਵਿਟਰਜ਼ਰਲੈਂਡ"
#: crypto.pm:20 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "ਕਾਸਟ ਰੀਕਾ"
#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "ਚੈੱਕ ਗਣਰਾਜ"
#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "ਜਰਮਨੀ"
#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "ਡੈਨਮਾਰਕ"
#: crypto.pm:24 crypto.pm:55 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "ਈਸਟੋਨੀਆ"
#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
#, c-format
msgid "Spain"
msgstr "ਸਪੇਨ"
#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "ਫ਼ਿਨਲੈਂਡ"
#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:48
#, c-format
msgid "France"
msgstr "ਫਰਾਂਸ"
#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "ਗਰੀਸ"
#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "ਹੰਗਰੀ"
#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "ਆਈਰਲੈਂਡ"
#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "ਇਜ਼ਰਾਈਲ"
#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "ਇਟਲੀ"
#: crypto.pm:33 crypto.pm:64 lang.pm:303
#, c-format
msgid "Japan"
msgstr "ਜਾਪਾਨ"
#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:49
#, c-format
msgid "Netherlands"
msgstr "ਨੀਂਦਰਲੈਂਡ"
#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "ਨਾਰਵੇ"
#: crypto.pm:36 crypto.pm:66 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "ਨਿਊਜੀਲੈਂਡ"
#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "ਪੋਲੈਂਡ"
#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "ਪੁਰਤਗਾਲ"
#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "ਰੂਸ"
#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
#, c-format
msgid "Sweden"
msgstr "ਸਵੀਡਨ"
#: crypto.pm:41 crypto.pm:71 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "ਸਲੋਵਾਕੀਆ"
#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
#, c-format
msgid "Thailand"
msgstr "ਥਾਈਲੈਂਡ"
#: crypto.pm:43 crypto.pm:76 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "ਤਾਈਵਾਨ"
#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "ਦੱਖਣੀ ਅਫਰੀਕਾ"
#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
#, c-format
msgid "United States"
msgstr "ਅਮਰੀਕਾ"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV ਇੱਕ ਪਰੋਟੋਕਾਲ ਹੈ ਜੋ ਤੁਹਾਨੂੰ ਵੈਬ ਸਰਵਰ ਦੀ ਡਾਇਰੈਕਟਰੀ ਲੋਕਲ ਹੀ ਮਾਊਂਟ ਕਰਨ\n"
"ਦਿੰਦਾ ਹੈ, ਅਤੇ ਇਸ ਨੂੰ ਲੋਕਲ ਫਾਇਲ ਸਿਸਟਮ ਤੌਰ ਤੇ ਸਮਝਦਾ ਹੈ (ਵੈਬ ਸਰਵਰ ਨੂੰ WebDAV ਸਰਵਰ\n"
"ਤੌਰ ਤੇ ਸੰਰਚਿਤ ਕਰਦਾ ਹੈ)। ਜੇ ਤੁਸੀਂ WebDAV ਮਾਊਂਟ ਸਥਿਤੀ ਸ਼ਾਮਿਲ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ,\n"
"\"ਨਵਾਂ\" ਚੁਣੋ।"
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "ਨਵਾਂ"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "ਅਨ-ਮਾਊਟ"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "ਮਾਊਟ"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "ਮਾਂਊਟ ਪੁਆਂਇਟ"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "ਕਿਰਪਾ ਕਰਕੇ WebDAV ਸਰਵਰ URL ਭਰੋ"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL, http:// ਜਾਂ https:// ਨਾਲ ਸ਼ੁਰੂ ਹੋਣਾ ਜਰੂਰੀ ਹੈ"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "ਸਰਵਰ:"
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
#, c-format
msgid "Mount point: "
msgstr "ਮਾਊਂਟ ਸਥਿਤੀ:"
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
#, c-format
msgid "Options: %s"
msgstr "ਚੋਣ: %s"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਪਹਿਲਾਂ ਆਪਣੇ ਡਾਟੇ ਦਾ ਬੈਕਅੱਪ ਲਵੋ"
#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"ਜੇ ਤੁਸੀਂ aboot ਵਰਤਣ ਬਾਰੇ ਸੋਚਿਆ ਹੈ, ਡਿਸਕ ਦੇ ਸ਼ੁਰੂ ਵਿੱਚ ਖਾਲੀ ਥਾਂ (2048 ਸੈਕਟਰ ਕਾਫੀ ਹਨ)\n"
" ਛੱਡਣ ਦਾ ਧਿਆਨ ਰੱਖੋ।"
#: diskdrake/hd_gtk.pm:155 help.pm:530
#, c-format
msgid "Wizard"
msgstr "ਤਖਤੀ"
#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "ਕਾਰਵਾਈ ਚੁਣੋ"
#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ਤੁਹਾਡੇ ਕੋਲ ਇੱਕ ਵੱਡਾ ਮਾਈਕ੍ਰੋਸਾਫਟ Windows ਭਾਗ ਹੈ।\n"
"ਮੈਂ ਤੁਹਾਨੂੰ ਪਹਿਲਾਂ ਇਸ ਭਾਗ ਨੂੰ ਮੁੜ ਅਕਾਰ ਦੇਣ ਬਾਰੇ ਕਹਿੰਦਾ ਹਾਂ\n"
"(ਇਸ ਨੂੰ ਦਬਾਓ, ਫਿਰ \"ਮੁੜ-ਅਕਾਰ\" ਦਬਾਓ)"
#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਭਾਗ ਤੇ ਕਲਿੱਕ ਕਰੋ"
#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
#: standalone/drakbackup:2936 standalone/drakbackup:2996
#, c-format
msgid "Details"
msgstr "ਵੇਰਵਾ"
#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "ਕੋਈ ਹਾਰਡ ਡਰਾਈਵ ਨਹੀਂ ਲੱਭੀ"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Journalised FS"
msgstr "ਜਰਨਲਾਈਜ਼ਡ FS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "ਸਵੈਪ"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
#, c-format
msgid "Empty"
msgstr "ਖਾਲੀ"
#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "ਫਾਇਲ-ਸਿਸਟਮ ਕਿਸਮ:"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "``%s'' ਵਰਤੋ"
#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
#, c-format
msgid "Create"
msgstr "ਬਣਾਓ"
#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:107 standalone/harddrake2:116
#, c-format
msgid "Type"
msgstr "ਕਿਸਮ"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
#: standalone/drakperm:124 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "ਹਟਾਓ"
#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "ਪਹਿਲਾਂ ``ਅਨ-ਮਾਊਂਟ'' ਵਰਤੋ"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "ਹੋਰ ਭਾਗ ਵਰਤੋ"
#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "ਭਾਗ ਚੁਣੋ"
#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "ਬਾਹਰ"
#: diskdrake/interactive.pm:253 help.pm:530
#, c-format
msgid "Undo"
msgstr "ਵਾਪਿਸ"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "ਸਧਾਰਨ ਵਿਧੀ ਤਬਦੀਲ ਕਰੋ"
#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "ਮਾਹਿਰ ਵਿਧੀ ਤਬਦੀਲ ਕਰੋ"
#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "ਕਿਸੇ ਤਰਾਂ ਜਾਰੀ ਰਹੋ?"
#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"ਤੁਹਾਨੂੰ ਭਾਗ %s ਫਾਰਮਿਟ ਕਰਨਾ ਚਾਹੀਦਾ ਹੈ।\n"
"ਨਹੀਂ ਤਾਂ ਮਾਊਂਟ ਸਥਿਤੀ %s ਲਈ ਕੋਈ ਇੰਦਰਾਜ fstab ਵਿੱਚ ਲਿਖੀ ਨਹੀਂ ਜਾਵੇਗੀ।\n"
"ਕਿਸੇ ਤਰਾਂ ਬਾਹਰ?"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "ਬਿਨਾਂ ਸੰਭਾਲੇ ਹੀ ਬਾਹਰ"
#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "ਭਾਗ ਸਾਰਣੀ ਲਿਖਣ ਬਿਨਾ ਬਾਹਰ?"
#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "ਕੀ ਤੁਸੀਂ /etc/fstab ਤਬਦੀਲੀਆਂ ਸੰਭਾਲਣੀਆਂ ਚਾਹੁੰਦੇ ਹੋ"
#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "ਤੁਹਾਨੂੰ ਭਾਗ ਸਾਰਣੀ ਤਬਦੀਲੀਆਂ ਲਾਗੂ ਹੋਣ ਲਈ ਮੁੜ ਚਲਾਉਣ ਦੀ ਜਰੂਰਤ ਹੈ।"
#: diskdrake/interactive.pm:307 help.pm:530
#, c-format
msgid "Clear all"
msgstr "ਸਭ ਸਾਫ"
#: diskdrake/interactive.pm:308 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "ਸਵੈ ਜਾਰੀ"
#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "ਹੋਰ"
#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "ਹਾਰਡ ਡਰਾਈਵ ਜਾਣਕਾਰੀ"
#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "ਸਭ ਪ੍ਰਾਇਮਰੀ ਭਾਗ ਵਰਤੇ ਹਨ"
#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "ਮੈਂ ਹੋਰ ਭਾਗ ਸ਼ਾਮਿਲ ਨਹੀਂ ਕਰ ਸਕਦਾ"
#: diskdrake/interactive.pm:348
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr "ਹੋਰ ਭਾਗ ਹੋਣ ਲਈ, ਕਿਰਪਾ ਕਰਕੇ ਐਕਸਟੈਂਡਡ ਭਾਗ ਬਣਾਉਣ ਲਈ ਇੱਕ ਹਟਾਓ।"
#: diskdrake/interactive.pm:357
#, c-format
msgid "No supermount"
msgstr ""
#: diskdrake/interactive.pm:358
#, c-format
msgid "Supermount"
msgstr ""
#: diskdrake/interactive.pm:359
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""
#: diskdrake/interactive.pm:365 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "ਭਾਗ ਸਾਰਣੀ ਸੰਭਾਲੋ"
#: diskdrake/interactive.pm:366 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "ਭਾਗ ਸਾਰਣੀ ਮੁੜ-ਸੰਭਾਲੋ"
#: diskdrake/interactive.pm:367 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "ਭਾਗ ਸਾਰਣੀ ਸੰਕਟ-ਕਾਲੀਨ"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "ਭਾਗ ਸਾਰਣੀ ਮੁੜ-ਲੋਡ"
#: diskdrake/interactive.pm:371
#, c-format
msgid "Removable media automounting"
msgstr "ਹਟਾਉਣ ਯੋਗ ਮਾਧਿਅਮ ਸਵੈ-ਮਾਊਂਟ ਹੋ ਰਿਹਾ ਹੈ"
#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
#, c-format
msgid "Select file"
msgstr "ਫਾਇਲ ਚੁਣੋ"
#: diskdrake/interactive.pm:396
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"ਬੈਕਅੱਪ ਭਾਗ ਸਾਰਣੀ ਦਾ ਸਮਾਨ ਅਕਾਰ ਨਹੀਂ ਹੈ\n"
"ਹਾਲੇ ਜਾਰੀ ਕਰੋ?"
#: diskdrake/interactive.pm:425
#, c-format
msgid "Trying to rescue partition table"
msgstr "ਸੰਕਟ-ਕਾਲੀਨ ਭਾਗ ਸਾਰਣੀ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰ ਰਿਹਾ ਹੈ"
#: diskdrake/interactive.pm:431
#, c-format
msgid "Detailed information"
msgstr "ਵਿਸਥਾਰ ਜਾਣਕਾਰੀ"
#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
#, c-format
msgid "Resize"
msgstr "ਮੁੜ-ਆਕਾਰ"
#: diskdrake/interactive.pm:447
#, c-format
msgid "Format"
msgstr "ਫਾਰਮਿਟ"
#: diskdrake/interactive.pm:449
#, c-format
msgid "Add to RAID"
msgstr "RAID ਵਿੱਚ ਸ਼ਾਮਿਲ"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Add to LVM"
msgstr "LVM ਵਿੱਚ ਸ਼ਾਮਿਲ"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Remove from RAID"
msgstr "RAID ਵਿੱਚੋਂ ਹਟਾਓ"
#: diskdrake/interactive.pm:454
#, c-format
msgid "Remove from LVM"
msgstr "LVM ਵਿੱਚੋਂ ਹਟਾਓ"
#: diskdrake/interactive.pm:455
#, c-format
msgid "Modify RAID"
msgstr "LVM ਤਬਦੀਲ"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Use for loopback"
msgstr "ਲੂਪਬੈਕ ਲਈ ਵਰਤੋ"
#: diskdrake/interactive.pm:512
#, c-format
msgid "Create a new partition"
msgstr "ਨਵਾਂ ਭਾਗ ਬਣਾਓ"
#: diskdrake/interactive.pm:515
#, c-format
msgid "Start sector: "
msgstr "ਸੈਕਟਰ ਸ਼ੁਰੂ ਕਰੋ:"
#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
#, c-format
msgid "Size in MB: "
msgstr "ਮੈਬਾ ਵਿੱਚ ਅਕਾਰ:"
#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
#, c-format
msgid "Filesystem type: "
msgstr "ਫਾਇਲ-ਸਿਸਟਮ ਕਿਸਮ:"
#: diskdrake/interactive.pm:523
#, c-format
msgid "Preference: "
msgstr "ਮੇਰੀ ਪਸੰਦ:"
#: diskdrake/interactive.pm:526
#, c-format
msgid "Logical volume name "
msgstr "ਲੋਕਲ ਵਾਲਿਅਮ ਨਾਂ"
#: diskdrake/interactive.pm:556
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"ਤੁਸੀਂ ਨਵਾਂ ਭਾਗ ਨਹੀਂ ਬਣਾ ਸਕਦੇ\n"
"(ਕਿਉਂਕਿ ਤੁਸੀਂ ਵੱਧ-ਤੋਂ-ਵੱਧ ਭਾਗ ਬਣਾ ਚੁੱਕੇ ਹੋ)।\n"
"ਪਹਿਲਾਂ ਪ੍ਰਾਇਮਰੀ ਭਾਗ ਹਟਾਓ ਅਤੇ ਐਕਸਟੈਂਡਡ ਭਾਗ ਬਣਾਓ।"
#: diskdrake/interactive.pm:586
#, c-format
msgid "Remove the loopback file?"
msgstr "ਲੂਪਬੈਕ ਫਾਇਲ ਹਟਾਓ?"
#: diskdrake/interactive.pm:605
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "ਭਾਗ %s ਦੀ ਕਿਸਮ ਤਬਦੀਲ ਕਰਨ ਤੋਂ ਬਾਅਦ, ਇਸ ਭਾਗ ਤੋਂ ਸਾਰਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ।"
#: diskdrake/interactive.pm:617
#, c-format
msgid "Change partition type"
msgstr "ਭਾਗ ਕਿਸਮ ਤਬਦੀਲ"
#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "ਤੁਸੀਂ ਕਿਹੜਾ ਫਾਇਲ ਸਿਸਟਮ ਚਾਹੁੰਦੇ ਹੋ?"
#: diskdrake/interactive.pm:626
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "ext2 ਤੋਂ ext3 ਤਬਦੀਲੀ"
#: diskdrake/interactive.pm:655
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "ਤੁਸੀਂ ਲੂਪਬੈਕ ਫਾਇਲ %s ਕਿੱਥੇ ਮਾਊਂਟ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ?"
#: diskdrake/interactive.pm:656
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "ਤੁਸੀਂ ਜੰਤਰ %s ਕਿੱਥੇ ਮਾਊਂਟ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ?"
#: diskdrake/interactive.pm:661
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"ਮਾਊਂਟ ਸਥਿਤੀ ਹਟਾ ਨਹੀਂ ਸਕਦਾ ਕਿਉਂਕਿ ਇਹ ਭਾਗ ਲੂਪਬੈਕ ਲਈ ਵਰਤਿਆ ਹੈ।\n"
"ਪਹਿਲਾ ਲੂਪਬੈਕ ਹਟਾਓ।"
#: diskdrake/interactive.pm:686
#, c-format
msgid "Where do you want to mount %s?"
msgstr "ਤੁਸੀਂ %s ਨੂੰ ਕਿੱਥੇ ਮਾਊਂਟ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ?"
#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "ਮੁੜ-ਆਕਾਰ"
#: diskdrake/interactive.pm:710
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "FAT ਫਾਇਲ ਸਿਸਟਮ ਬੰਧਨ ਜਾਂਚ ਜਾਰੀ"
#: diskdrake/interactive.pm:750
#, c-format
msgid "This partition is not resizeable"
msgstr "ਇਹ ਭਾਗ ਮੁੜ-ਅਕਾਰ ਦੇ ਯੋਗ ਨਹੀਂ"
#: diskdrake/interactive.pm:755
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "ਇਸ ਭਾਗ ਤੇ ਸਾਰਾ ਡਾਟਾ ਬੈਕਅੱਪ ਹੋਣਾ ਚਾਹੀਦਾ ਹੈ"
#: diskdrake/interactive.pm:757
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "ਭਾਗ %s ਮੁੜ ਅਕਾਰ ਤੋਂ ਬਾਅਦ, ਇਸ ਭਾਗ ਤੇ ਸਾਰਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ"
#: diskdrake/interactive.pm:762
#, c-format
msgid "Choose the new size"
msgstr "ਨਵਾਂ ਅਕਾਰ ਚੁਣੋ"
#: diskdrake/interactive.pm:763
#, c-format
msgid "New size in MB: "
msgstr "ਮੈਬਾ ਵਿੱਚ ਨਵਾਂ ਅਕਾਰ:"
#: diskdrake/interactive.pm:806 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"ਭਾਗ ਮੁੜ-ਅਕਾਰ ਤੋਂ ਬਾਅਦ ਡਾਟਾ ਇੱਕਸਾਰਤਾ ਜਾਂਚ ਲਈ, \n"
"Windows(TM) ਵਿੱਚ ਤੁਹਾਡੀ ਅਗਲੀ ਬੂਟ ਦੌਰਾਨ ਫਾਇਲ ਸਿਸਟਮ ਜਾਂਚ ਚੱਲੇਗੀ"
#: diskdrake/interactive.pm:844
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "ਸ਼ਾਮਿਲ ਕਰਨ ਲਈ ਮੌਜੂਦਾ RAID ਚੁਣੋ"
#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
#, c-format
msgid "new"
msgstr "ਨਵਾਂ"
#: diskdrake/interactive.pm:861
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "ਸ਼ਾਮਿਲ ਕਰਨ ਲਈ ਮੌਜੂਦਾ LVM ਚੁਣੋ"
#: diskdrake/interactive.pm:867
#, c-format
msgid "LVM name?"
msgstr "LVM ਨਾਂ?"
#: diskdrake/interactive.pm:904
#, c-format
msgid "This partition can not be used for loopback"
msgstr "ਇਹ ਭਾਗ ਲੂਪਬੈਕ ਲਈ ਨਹੀਂ ਵਰਤਿਆ ਜਾ ਸਕਦਾ"
#: diskdrake/interactive.pm:917
#, c-format
msgid "Loopback"
msgstr "ਲੂਪਬੈਕ"
#: diskdrake/interactive.pm:918
#, c-format
msgid "Loopback file name: "
msgstr "ਲੂਪਬੈਕ ਫਾਇਲ ਨਾਂ:"
#: diskdrake/interactive.pm:923
#, c-format
msgid "Give a file name"
msgstr "ਫਾਇਲ ਨਾਂ ਦਿਓ"
#: diskdrake/interactive.pm:926
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "ਫਾਇਲ ਪਹਿਲਾਂ ਹੀ ਹੋਰ ਲੂਪਬੈਕ ਦੁਆਰਾ ਵਰਤੀ ਹੈ, ਹੋਰ ਚੁਣੋ"
#: diskdrake/interactive.pm:927
#, c-format
msgid "File already exists. Use it?"
msgstr "ਫਾਇਲ ਪਹਿਲਾਂ ਮੌਜੂਦ ਹੈ, ਇਹ ਵਰਤੋ?"
#: diskdrake/interactive.pm:950
#, c-format
msgid "Mount options"
msgstr "ਮਾਊਂਟ ਚੋਣ"
#: diskdrake/interactive.pm:957
#, c-format
msgid "Various"
msgstr "ਵੱਖਰੇ"
#: diskdrake/interactive.pm:1021
#, c-format
msgid "device"
msgstr "ਜੰਤਰ"
#: diskdrake/interactive.pm:1022
#, c-format
msgid "level"
msgstr "ਪੱਧਰ"
#: diskdrake/interactive.pm:1023
#, c-format
msgid "chunk size in KiB"
msgstr "ਕਿਬਾ ਵਿੱਚ chunk ਅਕਾਰ"
#: diskdrake/interactive.pm:1040
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "ਸਾਵਧਾਨ: ਇਹ ਕਿਰਿਆ ਖਤਰਨਾਕ ਹੈ।"
#: diskdrake/interactive.pm:1055
#, c-format
msgid "What type of partitioning?"
msgstr "ਭਾਗ ਦੀ ਕਿਹੜੀ ਕਿਸਮ?"
#: diskdrake/interactive.pm:1093
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "ਤਬਦੀਲੀ ਲਾਗੂ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ ਤੁਹਾਨੂੰ ਮੁੜ ਚਲਾਉਣਾ ਪਵੇਗਾ"
#: diskdrake/interactive.pm:1102
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ਡਰਾਈਵ %s ਦੀ ਭਾਗ ਸਾਰਣੀ ਡਿਸਕ ਤੇ ਲਿਖੀ ਜਾ ਰਹੀ ਹੈ!"
#: diskdrake/interactive.pm:1115
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "ਭਾਗ %s ਫਾਰਮਿਟ ਕਰਨ ਤੋਂ ਬਾਅਦ, ਇਸ ਭਾਗ ਤੇ ਸਾਰਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ"
#: diskdrake/interactive.pm:1131
#, c-format
msgid "Move files to the new partition"
msgstr "ਫਾਇਲਾਂ ਨਵੇਂ ਭਾਗ ਤੇ ਲਿਜਾਓ"
#: diskdrake/interactive.pm:1131
#, c-format
msgid "Hide files"
msgstr "ਫਾਇਲਾਂ ਓਹਲੇ"
#: diskdrake/interactive.pm:1132
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"ਡਾਇਰੈਕਟਰੀ %s ਵਿੱਚ ਪਹਿਲਾਂ ਡਾਟਾ (%s ) \n"
"ਸ਼ਾਮਿਲ ਹੈ"
#: diskdrake/interactive.pm:1143
#, c-format
msgid "Moving files to the new partition"
msgstr "ਫਾਇਲਾ ਨਵੇਂ ਭਾਗ ਤੇ ਜਾ ਰਹੀਆਂ ਹਨ"
#: diskdrake/interactive.pm:1147
#, c-format
msgid "Copying %s"
msgstr "%s ਨਕਲ ਹੋ ਰਹੀ ਹੈ"
#: diskdrake/interactive.pm:1151
#, c-format
msgid "Removing %s"
msgstr "%s ਹਟਾ ਰਿਹਾ ਹੈ"
#: diskdrake/interactive.pm:1165
#, c-format
msgid "partition %s is now known as %s"
msgstr "ਭਾਗ %s ਹੁਣ %s ਨਾਲ ਜਾਣਿਆ ਜਾਂਦਾ ਹੈ"
#: diskdrake/interactive.pm:1166
#, c-format
msgid "Partitions have been renumbered: "
msgstr "ਭਾਗ ਮੁੜ ਅੰਕਿਤ ਕੀਤੇ ਗਏ:"
#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
#, c-format
msgid "Device: "
msgstr "ਜੰਤਰ:"
#: diskdrake/interactive.pm:1187
#, c-format
msgid "Devfs name: "
msgstr "Devfs ਨਾਂ: "
#: diskdrake/interactive.pm:1188
#, c-format
msgid "Volume label: "
msgstr "ਵਾਲਿਅਮ ਲੇਬਲ:"
#: diskdrake/interactive.pm:1189
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS ਡਰਾਈਵ ਅੱਖਰ: %s (ਅੰਦਾਜਾ)\n"
#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
#: diskdrake/interactive.pm:1263
#, c-format
msgid "Type: "
msgstr "ਕਿਸਮ:"
#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
#, c-format
msgid "Name: "
msgstr "ਨਾਂ:"
#: diskdrake/interactive.pm:1204
#, c-format
msgid "Start: sector %s\n"
msgstr "ਸ਼ੁਰੂ: ਸੈਕਟਰ %s\n"
#: diskdrake/interactive.pm:1205
#, c-format
msgid "Size: %s"
msgstr "ਅਕਾਰ: %s"
#: diskdrake/interactive.pm:1207
#, c-format
msgid ", %s sectors"
msgstr ", %s ਸੈਕਟਰ"
#: diskdrake/interactive.pm:1209
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "ਸਿਲੰਡਰ %d ਤੋਂ %d\n"
#: diskdrake/interactive.pm:1210
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1211
#, c-format
msgid "Formatted\n"
msgstr "ਫਾਰਮਿਟ ਕੀਤੀ\n"
#: diskdrake/interactive.pm:1212
#, c-format
msgid "Not formatted\n"
msgstr "ਫਾਰਮਿਟ ਨਹੀਂ\n"
#: diskdrake/interactive.pm:1213
#, c-format
msgid "Mounted\n"
msgstr "ਮਾਊਂਟ ਕੀਤੀ\n"
#: diskdrake/interactive.pm:1214
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1216
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"ਲੂਪਬੈਕ ਫਾਇਲਾਂ:\n"
" %s\n"
#: diskdrake/interactive.pm:1217
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"ਮੂਲ ਬੂਟ ਕੀਤਾ ਭਾਗ\n"
" (MS-DOS ਬੂਟ ਲਈ, lilo ਲਈ ਨਹੀਂ)\n"
#: diskdrake/interactive.pm:1219
#, c-format
msgid "Level %s\n"
msgstr "ਪੱਧਰ %s\n"
#: diskdrake/interactive.pm:1220
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "Chunk ਅਕਾਰ %d ਕਿਬਾ\n"
#: diskdrake/interactive.pm:1221
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-ਡਿਸਕ %s\n"
#: diskdrake/interactive.pm:1223
#, c-format
msgid "Loopback file name: %s"
msgstr "ਲੂਪਬੈਕ ਫਾਇਲ ਨਾਂ: %s"
#: diskdrake/interactive.pm:1226
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"ਮੌਕੇ ਹਨ, ਇਹ ਭਾਗ\n"
"ਡਰਾਈਵਰ ਭਾਗ ਹੈ। ਤੁਹਾਨੂੰ ਸੰਭਾਵੀ ਹੀ\n"
"ਇਸ ਨੂੰ ਇਕੱਲੀ ਛੱਡਣਾ ਪਵੇਗਾ।\n"
#: diskdrake/interactive.pm:1229
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"ਇਹ ਖਾਸ Bootstrap\n"
"ਭਾਗ ਤੁਹਾਡੇ ਸਿਸਟਮ ਨੂੰ \n"
"ਦੋਹਰਾ-ਬੂਟ ਕਰਨ ਲਈ ਹੈ।\n"
#: diskdrake/interactive.pm:1246
#, c-format
msgid "Read-only"
msgstr "ਸਿਰਫ਼ ਪੜਨ ਲਈ"
#: diskdrake/interactive.pm:1247
#, c-format
msgid "Size: %s\n"
msgstr "ਅਕਾਰ: %s\n"
#: diskdrake/interactive.pm:1248
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ਬਣਤਰ: %s ਸਿਲੰਡਰ, %s ਹੈੱਡ, %s ਸੈਕਟਰ\n"
#: diskdrake/interactive.pm:1249
#, c-format
msgid "Info: "
msgstr "ਜਾਣਕਾਰੀ:"
#: diskdrake/interactive.pm:1250
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-ਡਿਸਕਾਂ %s\n"
#: diskdrake/interactive.pm:1251
#, c-format
msgid "Partition table type: %s\n"
msgstr "ਭਾਗ ਸਾਰਣੀ ਕਿਸਮ: %s\n"
#: diskdrake/interactive.pm:1252
#, c-format
msgid "on channel %d id %d\n"
msgstr "ਚੈਨਲ %d id %d ਤੇ\n"
#: diskdrake/interactive.pm:1287
#, c-format
msgid "Filesystem encryption key"
msgstr "ਫਾਇਲ ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ"
#: diskdrake/interactive.pm:1288
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "ਆਪਣੀ ਫਾਇਲ ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ ਚੁਣੋ"
#: diskdrake/interactive.pm:1291
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "ਇਹ ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ ਬਹੁਤ ਸੌਖੀ ਹੈ (ਘੱਟੋ-ਘੱਟ %d ਅੱਖਰਾਂ ਦੀ ਹੋਵੇ)"
#: diskdrake/interactive.pm:1292
#, c-format
msgid "The encryption keys do not match"
msgstr "ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ ਮੇਲ ਨਹੀਂ ਖਾਂਦੀ"
#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
#: standalone/drakconnect:430
#, c-format
msgid "Encryption key"
msgstr "ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ "
#: diskdrake/interactive.pm:1296
#, c-format
msgid "Encryption key (again)"
msgstr "ਇਨਕ੍ਰਿਪਸ਼ਨ ਕੁੰਜੀ (ਫਿਰ)"
#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
#: standalone/drakvpn:1116
#, c-format
msgid "Encryption algorithm"
msgstr "ਇਨਕ੍ਰਿਪਸ਼ਨ ਕਲਨ ਵਿਧੀ"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "ਕਿਸਮ ਤਬਦੀਲ"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "ਉਪਭੋਗੀ-ਨਾਂ %s ਵਰਤ ਕੇ ਲਾਗਇਨ ਨਹੀਂ ਕਰ ਸਕਦਾ ਹੈ (ਗੁਪਤ-ਕੋਡ ਗਲਤ?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "ਡੋਮੇਨ ਪ੍ਰਮਾਣਿਕਤਾ ਦੀ ਲੋੜ ਹੈ"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "ਕਿਹੜਾ ਉਪਭੋਗੀ-ਨਾਂ"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "ਕੋਈ ਹੋਰ"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਇਹ ਮੇਜ਼ਬਾਨ ਵਰਤਣ ਲਈ ਆਪਣਾ ਉਪਭੋਗੀ-ਨਾਂ, ਗੁਪਤ-ਕੋਡ ਅਤੇ ਡੋਮੇਨ ਨਾਂ ਦਿਓ।"
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
#, c-format
msgid "Username"
msgstr "ਉਪਭੋਗੀ-ਨਾਂ"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "ਸਰਵਰ ਖੋਜ"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "ਨਵਾਂ ਸਰਵਰ ਖੋਜ"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "ਪੈਕੇਜ %s ਇੰਸਟਾਲ ਕਰਨ ਦੀ ਲੋੜ ਹੈ। ਕੀ ਤੁਸੀਂ ਇਸ ਨੂੰ ਇੰਸਟਾਲ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "ਲਾਜ਼ਮੀ ਪੈਕੇਜ %s ਗੁੰਮ ਹੈ"
#: do_pkgs.pm:182
#, c-format
msgid "Installing packages..."
msgstr "ਪੈਕੇਜ ਇੰਸਟਾਲ ਹੋ ਰਹੇ ਹਨ..."
#: do_pkgs.pm:227
#, c-format
msgid "Removing packages..."
msgstr "ਪੈਕੇਜ ਹਟਾ ਰਿਹਾ ਹੈ"
#: fs.pm:487 fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "ਭਾਗ %s ਮਾਊਂਟ ਹੋ ਰਿਹਾ ਹੈ"
#: fs.pm:488 fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "ਭਾਗ %s ਨੂੰ ਡਾਇਰੈਕਟਰੀ %s ਵਿੱਚ ਮਾਊਂਟ ਕਰਨਾ ਅਸਫਲ"
#: fs.pm:508 fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "%s ਦੀ ਜਾਂਚ ਜਾਰੀ ਹੈ"
#: fs.pm:553 partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "%s ਅਨ-ਮਾਊਂਟ ਸਮੇਂ ਗਲਤੀ: %s"
#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "ਸਵੈਪ ਭਾਗ %s ਯੋਗ ਹੋ ਰਿਹਾ ਹੈ"
#: fs/format.pm:44 fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "ਭਾਗ %s ਫਾਰਮਿਟ ਹੋ ਰਿਹਾ ਹੈ"
#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "ਫਾਇਲ %s ਬਣਾ ਅਤੇ ਫਾਰਮਿਟ ਕਰ ਰਿਹਾ ਹੈ"
#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "ਮੈਂ ਨਹੀਂ ਜਾਣਦਾ ਕਿ %s ਨੂੰ %s ਕਿਸਮ ਵਿੱਚ ਕਿਵੇਂ ਫਾਰਮਿਟ ਕਰਨਾ ਹੈ"
#: fs/format.pm:88 fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s ਫਾਰਮਿਟਿੰਗ %s ਦੀ ਅਸਫਲ"
#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"ਇਸ ਫਾਇਲ ਸਿਸਟਮ ਤੇ inode ਪਹੁੰਚ ਸਮੇਂ ਦਾ ਨਵੀਨੀਕਰਨ ਨਾ ਕਰੋ\n"
"(ਜਿਵੇਂ, ਖਬਰ ਸਰਵਰ ਦੀ ਗਤੀ ਵਧਾਉਣ ਲਈ ਖਬਰ ਸਪੂਲ ਵਿੱਚ ਤੇਜ ਪਹੁੰਚ)।"
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"ਸਿਰਫ ਬਾਹਰੀ ਤੌਰ ਤੇ ਮਾਊਂਟ ਕੀਤੀ ਜਾ ਸਕਦੀ ਹੈ\n"
"(ਜਿਵੇਂ, -a ਚੋਣ ਫਾਇਲ ਸਿਸਟਮ ਨੂੰ ਮਾਊਂਟ ਹੋਣ ਨਹੀਂ ਦੇਵੇਗੀ)।"
#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "ਫਾਇਲ ਸਿਸਟਮ ਤੇ ਅੱਖਰ ਜਾਂ ਬਲਾਕ ਸਪੈਸ਼ਲ ਜੰਤਰਾਂ ਨਾ ਵਰਤੋ।"
#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"ਮਾਊਂਟ ਫਾਇਲ ਸਿਸਟਮ ਤੇ ਕੋਈ ਵੀ ਬਾਇਨਰੀ ਨੂੰ ਚੱਲਣ ਦੀ ਮਨਜੂਰੀ ਨਾ\n"
"ਦਿਓ। ਇਹ ਚੋਣ ਸਰਵਰ ਲਈ ਉਪਯੋਗੀ ਹੋ ਸਕਦੀ ਹੈ ਜਿਸ ਦੇ ਫਾਇਲ ਸਿਸਟਮ ਵਿੱਚ ਇਸ ਦੇ ਆਪਣੇ\n"
"ਤੋਂ ਬਿਨਾ ਹੋਰ ਢਾਂਚੇ ਵਿੱਚ ਬਾਇਨਰੀ ਸ਼ਾਮਿਲ ਹਨ।"
#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"ਉਪਭੋਗੀ-ਪਛਾਣ-ਨਿਰਧਾਰਨ(suid) ਜਾਂ ਸਮੂਹ-ਪਛਾਣ-ਨਿਰਧਾਰਨ(sgid)\n"
"ਬਿੱਟ ਨੂੰ ਪ੍ਰਭਾਵੀ ਹੋਣ ਨਾ ਦਿਓ। (ਇਸ ਸੁਰੱਖਿਅਤ ਲੱਗਦਾ ਹੈ, ਪਰ ਅਸੁਰੱਖਿਅਤ ਵੀ ਹੈ\n"
"ਜੇ ਤੁਹਾਡੇ ਕੋਲ suidperl(1) ਇੰਸਟਾਲ ਹੈ)।"
#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "ਫਾਇਲ ਸਿਸਟਮ ਸਿਰਫ ਪੜਨ ਲਈ ਮਾਊਂਟ ਕਰੋ।"
#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "ਫਾਇਲ ਸਿਸਟਮ ਨੂੰ ਸਭ I/O ਸਮਕਾਲੀ ਹੋਣੇ ਚਾਹੀਦੇ ਹਨ।"
#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"ਪੁਰਾਣੇ ਉਪਭੋਗੀ ਨੂੰ ਫਾਇਲ ਸਿਸਟਮ ਮਾਊਂਟ ਕਰਨ ਦੀ ਇਜਾਜ਼ਤ ਦਿਓ। ਮਾਊਂਟ\n"
"ਉਪਭੋਗੀ ਦਾ ਨਾਂ mtab ਵਿੱਚ ਲਿਖਿਆ ਜਾਂਦਾ ਹੈ ਤਾਂ ਕਿ ਉਹ ਫਿਰ ਫਾਇਲ ਸਿਸਟਮ ਅਨ-ਮਾਊਂਟ ਕਰ\n"
"ਸਕੇ। ਇਹ ਚੋਣ noexec, nosuid, ਅਤੇ nodev ਚੋਣਾ ਮੁਹੱਈਆ ਕਰਦੀ ਹੈ\n"
"(ਜਦੋਂ ਤੱਕ ਅਗਲੀ ਚੋਣ ਦੁਆਰਾ ਰੱਦ ਨਹੀਂ ਕੀਤੀ ਜਾਂਦੀ, ਜਿਵੇਂ ਚੋਣ ਲਾਈਨ\n"
"user,exec,dev,suid ਵਿੱਚ ਹੈ)।"
#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "ਸਧਾਰਨ ਉਪਭੋਗੀਆਂ ਨੂੰ ਲਿਖਣ ਦੀ ਮਨਜੂਰੀ ਦਿਓ"
#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "ਸਧਾਰਨ ਉਪਭੋਗੀਆਂ ਨੂੰ ਸਿਰਫ ਪੜਨ ਦੀ ਮਨਜੂਰੀ ਦਿਓ"
#: fs/type.pm:372
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "ਤੁਸੀਂ 16 ਮੈਬਾ ਤੋਂ ਘੱਟ ਭਾਗ ਲਈ JFS ਨਹੀਂ ਵਰਤ ਸਕਦੇ"
#: fs/type.pm:373
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "ਤੁਸੀਂ 32 ਮੈਬਾ ਤੋਂ ਘੱਟ ਭਾਗ ਲਈ ReiserFS ਨਹੀਂ ਵਰਤ ਸਕਦੇ"
#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "/usr ਨਾਲ"
#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "ਸਰਵਰ"
#: fsedit.pm:183
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"ਮੈਂ ਜੰਤਰ %s ਦੀ ਭਾਗ ਸਾਰਣੀ ਨਹੀਂ ਪੜ ਸਕਦਾ, ਇਹ ਮੇਰੇ ਲਈ ਨਕਾਰਾ ਹੈ :(\n"
"ਮੈਂ ਅੱਗੇ ਜਾਣ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰ ਸਕਦਾ ਹਾਂ, ਖਰਾਬ ਭਾਗ ਹਟਾਉਣ ਲਈ (ਸਾਰਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ!)।\n"
"ਹੋਰ ਹੱਲ ਹੈ DrakX ਨੂੰ ਭਾਗ ਸਾਰਣੀ ਤਬਦੀਲ ਨਾ ਕਰਨ ਦਿੱਤੀ ਜਾਵੇ।\n"
"(ਗਲਤੀ ਹੈ %s)\n"
"\n"
"ਕੀ ਤੁਸੀਂ ਸਾਰੇ ਭਾਗ ਗਵਾਉਣਾ ਚਾਹੁੰਦੇ ਹੋ?\n"
#: fsedit.pm:400
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "ਮਾਊਂਟ ਸਥਿਤੀ / ਨਾਲ ਸ਼ੁਰੂ ਹੋਣੀ ਜਰੂਰੀ ਹੈ"
#: fsedit.pm:401
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "ਮਾਊਂਟ ਸਥਿਤੀ ਵਿੱਚ ਸਿਰਫ ਅੱਖਰ-ਅੰਕੀ ਅੱਖਰਾਂ ਸ਼ਾਮਿਲ ਹੋਣੇ ਚਾਹੀਦੇ ਹਨ"
#: fsedit.pm:402
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "ਇੱਥੇ ਪਹਿਲਾ ਹੀ ਮਾਊਂਟ ਸਥਿਤੀ %s ਵਾਲਾ ਭਾਗ ਹੈ\n"
#: fsedit.pm:404
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"ਤੁਸੀਂ ਸਾਫਟਵੇਅਰ RAID ਭਾਗ ਨੂੰ root (/) ਤੌਰ ਤੇ ਚੁਣਿਆ ਹੈ।\n"
"ਕੋਈ ਬੂਟ-ਲੋਡਰ ਇਸ ਦਾ /boot ਭਾਗ ਤੋਂ ਬਿਨਾ ਪ੍ਰਬੰਧਨ ਨਹੀਂ ਕਰ ਸਕਦਾ।\n"
"ਕਿਰਪਾ ਕਰਕੇ ਯਕੀਨਨ /boot ਭਾਗ ਸ਼ਾਮਿਲ ਕਰੋ"
#: fsedit.pm:407
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "ਤੁਸੀਂ ਮਾਊਂਠ ਸਥਿਤੀ %s ਲਈ LVM ਲੌਜ਼ੀਕਲ ਵਾਲਿਅਮ ਨਹੀਂ ਵਰਤ ਸਕਦੇ"
#: fsedit.pm:409
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"ਤੁਸੀਂ ਸਾਫਟਵੇਅਰ LVM ਲੌਜ਼ੀਕਲ ਵਾਲਿਅਮ ਨੂੰ root (/) ਤੌਰ ਤੇ ਚੁਣਿਆ ਹੈ।\n"
"ਕੋਈ ਬੂਟ-ਲੋਡਰ ਇਸ ਦਾ /boot ਭਾਗ ਤੋਂ ਬਿਨਾ ਪ੍ਰਬੰਧਨ ਨਹੀਂ ਕਰ ਸਕਦਾ।\n"
"ਕਿਰਪਾ ਕਰਕੇ ਯਕੀਨਨ /boot ਭਾਗ ਸ਼ਾਮਿਲ ਕਰੋ"
#: fsedit.pm:412
#, c-format
msgid ""
"You may not be able to install lilo (since lilo does not handle a LV on "
"multiple PVs)"
msgstr ""
"ਤੁਸੀਂ lilo ਕਰਨ ਦੇ ਯੋਗ ਹੋ ਸਕਦੇ ਹੋ (ਕਿਉਂਕਿ lilo ਕਈ PVs ਤੇ LV ਦਾ ਪ੍ਰਬੰਧਨ ਨਹੀਂ ਕਰ ਸਕਦਾ)"
#: fsedit.pm:415 fsedit.pm:417
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "ਇਹ ਡਾਇਰੈਕਟਰੀ root ਫਾਇਲ-ਸਿਸਟਮ ਵਿੱਚ ਹੋਣੀ ਚਾਹੀਦੀ ਹੈ"
#: fsedit.pm:419 fsedit.pm:421
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"ਤੁਹਾਨੂੰ ਇਸ ਮਾਊਂਟ ਸਥਿਤੀ ਲਈ ਫਾਇਲ-ਸਿਸਟਮ (ext2/ext3, reiserfs, xfs, ਜਾਂ jfs) ਦੀ ਲੋੜ ਹੈ\n"
#: fsedit.pm:423
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "ਤੁਸੀਂ ਮਾਊਂਟ %s ਸਥਿਤੀ ਲਈ ਇਨਕ੍ਰਿਪਡ ਫਾਇਲ ਸਿਸਟਮ ਨਹੀਂ ਵਰਤ ਸਕਦੇ"
#: fsedit.pm:484
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "ਸਵੈ-ਜਾਰੀ ਕਰਨ ਲਈ ਲੋੜੀਂਦੀ ਖਾਲੀ ਥਾਂ ਨਹੀਂ ਹੈ"
#: fsedit.pm:486
#, c-format
msgid "Nothing to do"
msgstr "ਕੁਝ ਕਰਨ ਲਈ ਨਹੀਂ"
#: harddrake/data.pm:62 install_any.pm:1639
#, c-format
msgid "Floppy"
msgstr "ਫਲਾਪੀ"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "ਸੰਕੁਚਿਤ"
#: harddrake/data.pm:88 install_any.pm:1640
#, c-format
msgid "Hard Disk"
msgstr "ਹਾਰਡ ਡਿਸਕ"
#: harddrake/data.pm:97 install_any.pm:1641
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD ਨਿਰਮਾਤਾ"
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:127 standalone/drakbackup:2034
#, c-format
msgid "Tape"
msgstr "ਟੇਪ"
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "ਵੀਡੀਓ-ਕਾਰਡ"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "Tv-ਕਾਰਡ"
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "ਹੋਰ ਮਲਟੀਮੀਡੀਆ ਜੰਤਰ"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "ਸਾਊਂਡਕਾਰਡ"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "ਵੈਬਕੈਮ"
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "ਪਰੋਸੈੱਸਰ"
#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN ਅਡਾਪਟਰ"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "ਈਥਰਨੈੱਟ-ਕਾਰਡ"
#: harddrake/data.pm:283 network/netconnect.pm:575
#, c-format
msgid "Modem"
msgstr "ਮਾਡਮ"
#: harddrake/data.pm:293
#, c-format
msgid "ADSL adapters"
msgstr "ADSL ਅਡਾਪਟਰ"
#: harddrake/data.pm:307
#, c-format
msgid "Memory"
msgstr "ਮੈਮੋਰੀ"
#: harddrake/data.pm:316
#, c-format
msgid "AGP controllers"
msgstr "AGP ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:325 help.pm:186 help.pm:855
#: install_steps_interactive.pm:979
#, c-format
msgid "Printer"
msgstr "ਪ੍ਰਿੰਟਰ"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:339
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:348
#, c-format
msgid "Joystick"
msgstr "ਜਾਏਸਟਿੱਕ"
#: harddrake/data.pm:358
#, c-format
msgid "SATA controllers"
msgstr "SATA ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:367
#, c-format
msgid "RAID controllers"
msgstr "RAID ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:376
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:385
#, c-format
msgid "Firewire controllers"
msgstr "Firewire ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:394
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:403
#, c-format
msgid "SCSI controllers"
msgstr "SCSI ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:412
#, c-format
msgid "USB controllers"
msgstr "USB ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:421
#, c-format
msgid "USB ports"
msgstr "USB ਪੋਰਟ"
#: harddrake/data.pm:430
#, c-format
msgid "SMBus controllers"
msgstr "SMBus ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:439
#, c-format
msgid "Bridges and system controllers"
msgstr "ਬਰਿੱਜ ਅਤੇ ਸਿਸਟਮ ਕੰਟਰੋਲਰ"
#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "ਕੀ-ਬੋਰਡ"
#: harddrake/data.pm:461
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
#, c-format
msgid "Mouse"
msgstr "ਮਾਊਸ"
#: harddrake/data.pm:483
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:492
#, c-format
msgid "Scanner"
msgstr "ਸਕੈਨਰ"
#: harddrake/data.pm:502 standalone/harddrake2:440
#, c-format
msgid "Unknown/Others"
msgstr "ਅਣਪਛਾਤੇ/ਹੋਰ"
#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr "cpu # "
#: harddrake/sound.pm:191 standalone/drakconnect:170
#: standalone/drakconnect:648
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਉਡੀਕੋ... ਸੰਰਚਨਾ ਲਾਗੂ ਹੋ ਰਹੀ ਹੈ"
#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "ਕੋਈ ਅਨੁਸਾਰੀ ਡਰਾਈਵਰ ਨਹੀਂ"
#: harddrake/sound.pm:228
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"ਇੱਥੇ ਤੁਹਾਡੇ ਸਾਊਂਡ ਕਾਰਡ (%s) ਜੋ ਵਰਤਮਾਨ \"%s\" ਵਰਤ ਰਿਹਾ ਹੈ ਲਈ ਕੋਈ OSS/ALSA ਅਨੁਸਾਰੀ "
"ਡਰਾਈਵਰ ਨਹੀਂ ਹੈ"
#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "ਸਾਊਂਡ ਸੰਰਚਨਾ"
#: harddrake/sound.pm:236
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr "ਇੱਥੇ ਤੁਸੀਂ ਆਪਣੇ ਸਾਊਂਡ ਕਾਰਡ (%s) ਲਈ ਅਨੁਸਾਰੀ ਡਰਾਈਵਰ (OSS ਜਾਂ ALSA) ਚੁਣ ਸਕਦੇ ਹੋ।"
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"ਤੁਹਾਡਾ ਕਾਰਡ ਹੁਣ %s\"%s\" ਡਰਾਈਵਰ ਵਰਤਦਾ ਹੈ (ਤੁਹਾਡੇ ਕਾਰਡ ਲਈ ਮੂਲ ਡਰਾਈਵਰ \"%s\" ਹੈ)"
#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (ਮੁਕਤ ਸਾਊਂਡ ਸਿਸਟਮ) ਪਹਿਲਾ ਸਾਊਂਡ API ਸੀ। ਇਹ ਇੱਕ OS ਤੇ ਨਾ-ਨਿਰਭਰ ਸਾਊਂਡ API ਹੈ (ਇਹ "
"ਬਹੁਤੇ UNIX(tm) ਸਿਸਟਮਾਂ ਤੇ ਉਪਲੱਬਧ ਹੈ) ਪਰ ਇਹ ਮੁਢਲਾ ਅਤੇ ਸੀਮਿਤ API ਹੈ।\n"
"ਹੋਰ ਕੀ ਹੈ, ਸਭ OSS ਡਰਾਈਵਰ ਚੱਕਰ ਨੂੰ ਰੇਨਵਿੰਟ ਕਰਦੇ ਹਨ। \n"
"\n"
"ALSA (ਤਕਨੀਕੀ ਲੀਨਕਸ ਸਾਊਂਡ ਢਾਂਚਾ) ਮੈਡਿਊਲਾਂ ਵਿੱਚ ਵੰਡਿਆ ਢਾਂਚਾ ਹੈ ਜੋ ਕਿ\n"
"ISA ਦੀ ਵੱਡੀ ਸੀਮਾ ਨੂੰ ਸਹਿਯੋਗ ਦਿੰਦਾ ਹੈ, USB ਅਤੇ PCI ਕਾਰਡ।\n"
"\n"
"ਇਹ OSS ਨਾਲੋਂ ਬਹੁਤ ਉੱਚੇ API ਨੂੰ ਸਹਿਯੋਗ ਦਿੰਦਾ ਹੈ।\n"
"\n"
"alsa ਵਰਤਣ ਲਈ, ਤੁਸੀਂ ਹੇਠਲੇ ਵਰਤ ਸਕਦੇ ਹੋ:\n"
"- ਪੁਰਾਣਾ ਅਨੁਕੂਲਤਾ OSS api\n"
"- ਨਵਾਂ ALSA api ਜੋ ਬਹੁਤ ਨਵੀਆਂ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਮੁਹੱਈਆ ਕਰਦਾ ਹੈ ਪਰ ALSA ਲਾਇਬ੍ਰੇਰੀ ਵਰਤਣ ਸੀ ਲੋੜ "
"ਪੈਂਦੀ ਹੈ।\n"
#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "ਡਰਾਈਵਰ:"
#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr "ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ"
#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
#: network/ndiswrapper.pm:95 network/netconnect.pm:561
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
#: standalone/drakTermServ:326 standalone/drakTermServ:1136
#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:1007
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "ਚੇਤਾਵਨੀ"
#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"ਪੁਰਾਣਾ \"%s\" ਡਰਾਈਵਰ ਕਾਲੀ-ਸੂਚੀ ਵਿੱਚ ਹੈ।\n"
"\n"
"ਇਹ ਅਨ-ਲੋਡ ਕਰਨ ਦੌਰਾਨ ਕਰਨਲ ਨੂੰ oops ਕਰਨ ਲਈ ਰਿਪੋਰਟ ਕੀਤਾ ਹੈ।\n"
"\n"
"ਨਵਾਂ \"%s\" ਡਰਾਈਵਰ ਸਿਰਫ ਨਵੇਂ ਬੂਟਸਟਰੈਪ ਦੌਰਾਨ ਵਰਤਿਆ ਜਾਵੇਗਾ।"
#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr "ਕੋਈ ਖੁੱਲਾ ਸਰੋਤ ਡਰਾਈਵਰ ਨਹੀਂ"
#: harddrake/sound.pm:279
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"ਇੱਥੇ ਤੁਹਾਡੇ ਸਾਊਂਡ ਕਾਰਡ (%s) ਲਈ ਕੋਈ ਫਰੀ ਡਰਾਈਵਰ ਨਹੀਂ ਹੈ, ਪਰ \"%s\" ਤੇ ਇੱਕ ਮਲਕੀਅਤ ਡਰਾਈਵਰ "
"ਹੈ।"
#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "ਕੋਈ ਜਾਣਿਆ ਡਰਾਈਵਰ ਨਹੀਂ ਹੈ"
#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "ਇੱਥੇ ਤੁਹਾਡੇ ਸਾਊਂਡ ਕਾਰਡ (%s) ਲਈ ਕੋਈ ਜਾਣਿਆ ਡਰਾਈਵਰ ਨਹੀਂ ਹੈ"
#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "ਅਣਪਛਾਤਾ ਡਰਾਈਵਰ"
#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "ਗਲਤੀ: ਤੁਹਾਡੇ ਸਾਊਂਡ ਕਾਰਡ ਲਈ \"%s\" ਡਰਾਈਵਰ ਵਿਖਾਇਆ ਨਹੀਂ ਹੈ"
#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr "ਸਾਊਂਡ ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"ਪੁਰਾਣਾ ਬੱਗ ਸਾਊਂਡ ਜਾਂਚਕਾਰ ਹੇਠਲੀਆਂ ਕਮਾਂਡਾਂ ਚਲਾਉਣ ਲਈ ਹੈ:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" ਇਹ ਤੁਹਾਨੂੰ ਦੱਸੇਗੀ ਕਿ ਤੁਹਾਡਾ ਕਾਰਡ ਕਿਹੜਾ ਮੂਲ\n"
"ਡਰਾਇਵਰ ਵਰਤ ਰਿਹਾ ਹੈ\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" ਤੁਹਾਨੂੰ ਦੱਸੇਗੀ ਕਿ ਇਹ ਹੁਣ ਕਿਹੜਾ\n"
"ਡਰਾਈਵਰ ਵਰਤਦੀ ਹੈ\n"
"\n"
"- \"/sbin/lsmod\" ਤੁਹਾਨੂੰ ਜਾਂਚ ਕਰਨ ਦੇਵੇਗੀ ਕਿ ਇਸ ਦਾ ਮੈਡਿਊਲ (ਡਰਾਈਵਰ) ਲੋਡ\n"
"ਹੈ ਜਾਂ ਨਹੀਂ\n"
"\n"
"- \"/sbin/chkconfig --list sound\" ਅਤੇ \"/sbin/chkconfig --list alsa\" ਤੁਹਾਨੂੰ\n"
"ਦੱਸੇਗੀ ਕਿ ਸਾਊਂਡ ਅਤੇ alsa ਸੇਵਾਵਾਂ initlevel 3 ਤੇ ਚੱਲਣ ਲਈ ਸੰਰਚਿਤ ਹਨ ਜਾਂ\n"
"ਨਹੀਂ\n"
"\n"
"- \"aumix -q\" ਤੁਹਾਨੂੰ ਦੱਸੇਗੀ ਕਿ ਸਾਊਂਡ ਵਾਲਿਅਮ ਬੰਸ ਹੈ ਜਾਂ ਨਹੀਂ\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" ਦੱਸੇਗੀ ਕਿ ਸਾਊਂਡ ਕਾਰਡ ਕਿਹੜਾ ਪ੍ਰੋਗਰਾਮ ਵਰਤ ਰਿਹਾ ਹੈ\n"
#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "ਮੈਨੂੰ ਕੋਈ ਡਰਾਈਵਰ ਚੁੱਕਣ ਦਿਓ"
#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "ਅਨਕੂਲ ਡਰਾਈਵਰ ਚੁਣ ਰਿਹਾ ਹੈ"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"ਜੇ ਤੁਸੀਂ ਇਹ ਸੋਚਦੇ ਹੋ ਕਿ ਤੁਹਾਨੂੰ ਆਪਣੇ ਕਾਰਡ ਲਈ ਸਹੀ ਡਰਾਈਵਰ ਦਾ ਪਤਾ ਹੈ\n"
"ਤੁਸੀਂ ਉੱਪਰ ਸੂਚੀ ਵਿੱਚੋਂ ਇੱਕ ਚੁਣ ਸਕਦੇ ਹੋ।\n"
"\n"
"ਤੁਹਾਡੇ \"%s\" ਸਾਊਂਡ ਕਾਰਡ ਲਈ ਮੌਜੂਦਾ ਡਰਾਈਵਰ ਹੈ \"%s\""
#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
#: standalone/net_applet:77
#, c-format
msgid "Auto-detect"
msgstr "ਸਵੈ-ਖੋਜ"
#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "ਅਣਪਛਾਤਾ|ਸਧਾਰਨ"
#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "ਅਣਪਛਾਤਾ|CPH05X (bt878) [ਕਈ ਵਿਕ੍ਰੇਤਾ]"
#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "ਅਣਪਛਾਤਾ|CPH06X (bt878) [ਕਈ ਵਿਕ੍ਰੇਤਾ]"
#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"ਬਹੁਤੇ ਨਵੇਂ TV ਕਾਰਡਾਂ ਲਈ, GNU/ਲੀਨਕਸ ਕਰਨਲ ਦਾ bttv ਮੈਡਿਊਲ ਸਹੀ ਪੈਰਾਮੀਟਰ ਸਵੈ ਹੀ ਖੋਜ ਲੈਂਦਾ "
"ਹੈ।\n"
"ਜੇ ਤੁਹਾਡਾ ਕਾਰਡ ਨਹੀਂ ਲੱਭਿਆ ਗਿਆ, ਤੁਸੀਂ ਇੱਥੇ ਸਹੀ ਟਿਊਨਰ ਅਤੇ ਕਾਰਡ ਕਿਸਮ ਨੂੰ ਮਜਬੂਰ ਕਰ ਸਕਦੇ "
"ਹੋ।ਆਪਣਾ tv ਕਾਰਡ ਪੈਰਾਮੀਟਰ ਚੁਣੋ ਜੇ ਲੋੜ ਹੈ।"
#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "ਕਾਰਡ ਮਾਡਲ:"
#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr "ਟਿਊਨਰ ਕਿਸਮ:"
#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr "ਖੋਜੇ ਬਫਰਾਂ ਦੀ ਗਿਣਤੀ"
#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "mmap'ed ਖੋਜ ਲਈ ਖੋਜੇ ਬਫਰਾਂ ਦੀ ਗਿਣਤੀ"
#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr "PLL ਵਿਵਸਥਾ:"
#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr "ਰੇਡੀਓ ਸਹਿਯੋਗ:"
#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr "ਰੇਡੀਓ ਸਹਿਯੋਗ ਯੋਗ"
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"ਜਾਰੀ ਕਰਨ ਤੋਂ ਪਹਿਲਾਂ, ਤੁਹਾਨੂੰ ਲਾਈਸਿੰਸ ਧਿਆਨ ਨਾਲ ਪੜਨਾ ਚਾਹੀਦਾ ਹੈ। ਇਹ\n"
"ਪੂਰੇ ਮੈਂਡਰਿਵ-ਲੀਨਕਸ ਵੰਡ ਨੂੰ ਦਰਸਾਉਂਦੀ ਹੈ। ਜੇ ਤੁਸੀਂ ਸਾਰੀਆਂ ਗੱਲਾਂ ਨਾਲ ਸਹਿਮਤ\n"
"ਹੋ ਜੋ ਇਸ ਵਿੱਚ ਸ਼ਾਮਿਲ ਹਨ, \"%s\" ਬਕਸੇ ਨੂੰ ਚੁਣੋ। ਜੇ ਨਹੀਂ, \"%s\" ਬਟਨ ਤੇ ਕਲਿੱਕ\n"
"ਕਰਕੇ ਕੰਪਿਊਟਰ ਮੁੜ ਚੱਲੇਗਾ।"
#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
#: install_steps_interactive.pm:731 standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "ਸਵੀਕਾਰ"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "ਉਪਭੋਗੀ ਨਾਂ"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
#: standalone/drakTermServ:383 standalone/drakbackup:3938
#: standalone/drakbackup:4032 standalone/drakbackup:4049
#: standalone/drakbackup:4067 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "ਅੱਗੇ"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"ਮੈਂਡਰਿਵ-ਲੀਨਕਸ ਇੰਸਟਾਲੇਸ਼ਨ ਕਈ CD-ROM ਤੇ ਵੰਡੀ ਗਈ ਹੈ। ਜੇ ਇੱਕ ਚੁਣਿਆ\n"
"ਪੈਕੇਜ ਹੋਰ CD-ROM ਤੇ ਸਥਿਤ ਹੈ, DrakX ਮੌਜੂਦਾ CD ਨੂੰ ਰੱਦ ਕਰ ਦੇਵੇਗਾ\n"
"ਤੁਹਾਨੂੰ ਲੋੜੀਂਦੀ CD ਪਾਉਣ ਲਈ ਪੁੱਛੇਗਾ। ਜੇ ਤੁਹਾਡੇ ਕੋਲ ਲੋੜੀਂਦੀ CD ਨਹੀਂ\n"
"ਹੈ, ਸਿਰਫ \"%s\" ਤੇ ਕਲਿੱਕ ਕਰੋ, ਅਨੁਸਾਰੀ ਪੈਕੇਜ ਇੰਸਟਾਲ ਨਹੀਂ\n"
"ਹੋਵੇਗਾ।"
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "ਵਰਕਸਟੇਸ਼ਨ"
#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "ਵਿਕਾਸ"
#: help.pm:146 share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "ਗਰਾਫੀਕਲ ਵਾਤਾਵਰਨ"
#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "ਵੱਖ-ਵੱਖ ਪੈਕੇਜ ਚੋਣ"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "ਨਵੀਨੀਕਰਨ"
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "X ਨਾਲ"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "ਮੁੱਢਲੀ ਦਸਤਾਵੇਜ਼ੀ ਨਾਲ"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "ਯਕੀਨਨ ਘੱਟੋ-ਘੱਟ ਇੰਸਟਾਲ"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "ਸਵੈ-ਚਾਲਤ ਨਿਰਭਰਤਾ"
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": \"%s\" ਬਟਨ ਤੇ ਕਲਿੱਕ ਕਰਕੇ ਪ੍ਰਿੰਟਰ ਸੰਰਚਨਾ ਤਖਤੀ ਖੁੱਲੇਗੀ।\n"
"ਨਵਾਂ ਪ੍ਰਿੰਟਰ ਨਿਰਧਾਰਿਤ ਕਰਨ ਵਾਸਤੇ ਵਧੇਰੇ ਜਾਣਕਾਰੀ ਲਈ ``Starter Guide''\n"
"ਦਾ ਅਨੁਸਾਰੀ ਅਧਿਆਇ ਵੇਖੋ। ਸਾਡੇ ਦਸਤਾਵੇਜ਼ ਵਿੱਚ ਦਿੱਤਾ ਇੰਟਰਫੇਸ\n"
"ਇੰਸਟਾਲੇਸ਼ਨ ਦੌਰਾਨ ਵਰਤੇ ਇੰਟਰਫੇਸ ਵਰਗਾ ਹੈ।"
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
#: standalone/drakbackup:2325 standalone/drakbackup:2329
#: standalone/drakbackup:2333 standalone/drakbackup:2337
#, c-format
msgid "Configure"
msgstr "ਸੰਰਚਨਾ"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:874
#, c-format
msgid "Hardware clock set to GMT"
msgstr "ਜੰਤਰ ਘੜੀ ਨੂੰ GMT ਨਿਰਧਾਰਿਤ ਕੀਤਾ"
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "ਸਵੈਚਾਲਤ ਸਮਾਂ ਸਮਕਾਲਤਾ"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"ਮਾਨੀਟਰ\n"
"\n"
" ਆਮ ਤੌਰ ਤੇ ਇੰਸਟਾਲਰ ਸਵੈ ਹੀ ਤੁਹਾਡੇ ਸਿਸਟਮ ਤੇ ਜੁੜੇ ਮਾਨੀਟਰ ਨੂੰ ਖੋਜਦਾ ਅਤੇ\n"
"ਸੰਰਚਿਤ ਕਰਦਾ ਹੈ। ਜੇ ਇਹ ਠੀਕ ਨਹੀਂ, ਤੁਸੀਂ ਮਾਨੀਟਰਾਂ ਦੀ ਸੂਚੀ ਵਿੱਚੋਂ\n"
"ਆਪਣੇ ਕੰਪਿਊਟਰ ਨਾਲ ਜੁੜਿਆ ਮਾਨੀਟਰ ਚੁਣ ਸਕਦੇ ਹੋ।"
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"ਰੈਜ਼ੋਲੂਸ਼ਨ\n"
"\n"
" ਇੱਥੇ ਤੁਸੀਂ ਆਪਣੇ ਗਰਾਫਿਕਸ਼ ਹਾਰਡਵੇਅਰ ਲਈ ਉਪਲੱਬਧ ਰੈਜ਼ੋਲੁਸ਼ਨ ਅਤੇ ਰੰਗ ਡੂੰਘਾਈ\n"
"ਚੁਣ ਸਕਦੇ ਹੋ। ਇੱਕ ਜੋ ਤੁਹਾਡੀ ਲੋੜ ਪੂਰੀ ਕਰਦਾ ਹੈ ਚੁਣੋ (ਤੁਸੀਂ ਇੰਸਟਾਲੇਸ਼ਨ ਤੋਂ ਬਾਅਦ\n"
"ਤਬਦੀਲੀ ਕਰ ਦੇ ਯੋਗ ਹੋਵੋਗੇ)। ਚੁਣੀ ਸੰਰਚਨਾ ਦਾ ਨਮੂਨਾ ਮਾਨੀਟਰ ਤਸਵੀਰ\n"
"ਵਿੱਚ ਵਿਖਾਇਆ ਗਿਆ ਹੈ।"
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"ਜਦੋਂ ਤੁਹਾਡੇ ਕਾਰਡ ਲਈ 3D ਪ੍ਰਵੇਗ ਸਮੇਤ ਜਾਂ ਬਿਨਾਂ, ਵੱਖ-ਵੱਖ ਸਰਵਰ\n"
"ਉਪਲੱਬਧ ਹੋਣ, ਤੁਹਾਨੂੰ ਸਰਵਰ ਪੁੱਛਿਆ ਜਾਵੇਗਾ ਜੋ ਤੁਹਾਡੀ ਜਰੂਰਤ ਵਧੀਆ\n"
"ਪੂਰੀ ਕਰਦਾ ਹੈ।"
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"ਚੋਣ\n"
"\n"
" ਇਹ ਪਗ਼ ਤੁਹਾਨੂੰ ਚੁਣਨ ਦੇਵੇਗਾ ਕਿ ਕੀ ਤੁਹਾਡੀ ਮਸ਼ੀਨ ਸਵੈ ਹੀ ਬੂਟ ਦੌਰਾਨ\n"
"ਗਰਾਫੀਕਲ ਵਿੱਚ ਤਬਦੀਲ ਹੋ ਸਕਦੀ ਹੈ ਜਾਂ ਨਹੀਂ। ਜਰੂਰ, ਤੁਸੀਂ \"%s\" ਨੂੰ\n"
"ਨੂੰ ਚੁਣਨਾ ਚਾਹੋਗੇ ਜੇ ਤੁਹਾਡੀ ਮਸ਼ੀਨ ਨੇ ਸਰਵਰ ਤੌਰ ਤੇ ਕੰਮ ਕਰਨਾ ਹੈ, ਜਾਂ ਜੇ\n"
"ਤੁਸੀਂ ਸੰਰਚਿਤ ਦ੍ਰਿਸ਼ ਪ੍ਰਾਪਤ ਕਰਨ ਵਿੱਚ ਸਫਲ ਨਹੀਂ ਹੋਏ।"
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "ਖਾਲੀ ਥਾਂ ਵਰਤੋ"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "ਮੌਜੂਦਾ ਭਾਗ ਵਰਤੋ"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Windows ਭਾਗ ਤੇ ਖਾਲੀ ਥਾਂ ਵਰਤੋ"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "ਸਾਰੀ ਡਿਸਕ ਸਾਫ"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Windows ਹਟਾਓ"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "ਪਸੰਦੀ ਦਾ ਡਿਸਕ ਵਿਭਾਗੀਕਰਨ "
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "ਸਵੈ-ਇੰਸਟਾਲ ਫਲਾਪੀ ਬਣਾਓ"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Replay"
msgstr "ਮੁੜ-ਚਲਾਓ"
#: help.pm:409 install_steps_interactive.pm:1331
#, c-format
msgid "Automated"
msgstr "ਸਵੈਚਾਲਤ"
#: help.pm:409 install_steps_interactive.pm:1334
#, c-format
msgid "Save packages selection"
msgstr "ਪੈਕੇਜ ਚੋਣ ਸੰਭਾਲੋ"
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
#: interactive/newt.pm:318 printer/printerdrake.pm:3676
#: standalone/drakTermServ:362 standalone/drakbackup:3898
#: standalone/drakbackup:3937 standalone/drakbackup:4048
#: standalone/drakbackup:4063 ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "ਪਿੱਛੇ"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
#: install_steps_interactive.pm:156 standalone/drakbackup:4095
#, c-format
msgid "Install"
msgstr "ਇੰਸਟਾਲ"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "ਸੁਰੱਖਿਆ ਪ੍ਰਬੰਧਕ"
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "ਹਟਾਉਣ ਯੋਗ ਮਾਧਿਅਮ ਸਵੈ-ਮਾਊਂਟ ਹੋ ਰਿਹਾ ਹੈ"
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "ਸਧਾਰਨ/ਮਾਹਿਰ ਵਿਧੀ ਵਿਚਕਾਰ ਤਬਦੀਲੀ"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": ਵਰਤਮਾਨ ਦੇਸ਼ ਚੋਣ ਦੀ ਜਾਂਚ ਕਰਦੀ ਹੈ। ਜੇ ਤੁਸੀਂ ਇਸ ਦੇਸ਼ ਵਿੱਚ ਨਹੀਂ,\n"
"\"%s\" ਬਟਨ ਦਬਾਓ ਅਤੇ ਹੋਰ ਚੁਣੋ। ਜੇ ਤੁਹਾਡਾ ਦੇਸ਼ ਵਿਖਾਈ ਸੂਚੀ ਵਿੱਚ\n"
"ਨਹੀਂ ਹੈ, ਦੇਸ਼ ਸੂਚੀ ਪੂਰੀ ਕਰਨ ਲਈ \"%s\" ਬਟਨ ਦਬਾਓ।"
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Espanol"
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "ਚੱਕਰ ਸਮਰੂਪਤਾ ਨਾਲ"
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "ਵਿਆਪਕ | ਕੋਈ PS/2 ਤੇ USB ਮਾਊਸ"
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"ਕਿਰਪਾ ਕਰਕੇ ਠੀਕ ਪੋਰਟ ਚੁਣੋ। ਉਦਾਹਰਨ ਵਜੋਂ, Windows ਦੇ ਅਧੀਨ \"COM1\"\n"
"GNU/ਲੀਨਕਸ ਦੇ ਅਧਿਨ \"ttyS0\" ਕਹਿਲਾਉਂਦੀ ਹੈ।"
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:722
#, c-format
msgid "authentication"
msgstr "ਪ੍ਰਮਾਣਿਕਤਾ"
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"
#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
#, c-format
msgid "CUPS"
msgstr "CUPS"
#: help.pm:765
#, c-format
msgid "Expert"
msgstr "ਮਾਹਿਰ"
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": ਜੇ ਤੁਹਾਡੇ ਸਿਸਟਮ ਤੇ ਕੋਈ ਸਾਊਂਡ ਕਾਰਡ ਲੱਭਿਆ ਹੈ, ਇਹ ਇੱਥੇ ਵਿਖਾਇਆ\n"
"ਜਾਵੇਗਾ। ਜੇ ਲੱਭਿਆ ਕਾਰਡ ਤੁਹਾਡੇ ਸਿਸਟਮ ਵਾਲਾ ਸਾਊਂਡ ਕਾਰਡ ਨਹੀਂ ਹੈ,\n"
"ਤੁਸੀਂ ਬਟਨ ਦਬਾ ਸਕਦੇ ਹੋ ਅਤੇ ਹੋਰ ਡਰਾਈਵਰ ਚੁਣ ਸਕਦੇ ਹੋ।"
#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
#: install_steps_interactive.pm:1023
#, c-format
msgid "Sound card"
msgstr "ਸਾਊਂਡ ਕਾਰਡ"
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "ਸਮਾਂ-ਖੇਤਰ"
#: help.pm:855 install_steps_interactive.pm:1039
#, c-format
msgid "TV card"
msgstr "TV ਕਾਰਡ"
#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "ISDN ਕਾਰਡ"
#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "ਗਰਾਫੀਕਲ ਇੰਟਰਫੇਸ"
#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
#: standalone/drakbackup:2019
#, c-format
msgid "Network"
msgstr "ਨੈੱਟਵਰਕ"
#: help.pm:855 install_steps_interactive.pm:1072
#, c-format
msgid "Proxies"
msgstr "ਪਰਾਕਸੀ"
#: help.pm:855 install_steps_interactive.pm:1083
#, c-format
msgid "Security Level"
msgstr "ਸੁਰੱਖਿਆ ਪੱਧਰ"
#: help.pm:855 install_steps_interactive.pm:1097
#, c-format
msgid "Firewall"
msgstr "ਫਾਇਰਵਾਲ"
#: help.pm:855 install_steps_interactive.pm:1113
#, c-format
msgid "Bootloader"
msgstr "ਬੂਟ-ਲੋਡਰ"
#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
#, c-format
msgid "Services"
msgstr "ਸੇਵਾਵਾਂ"
#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"ਤੁਹਾਡਾ ਨਵਾਂ ਮੈਂਡਰਿਵ-ਲੀਨਕਸ ਭਾਗ ਇੰਸਟਾਲ ਕਰਨ ਲਈ ਸਾਫ ਕਰਨ ਵਾਸਤੇ\n"
"ਹਾਰਡ ਡਰਾਈਵ ਚੁਣੋ। ਧਿਆਨ ਰੱਖੋ, ਇਸ ਡਰਾਈਵ ਤੇ ਸਾਰਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ\n"
"ਅਤੇ ਮੁੜ ਪ੍ਰਾਪਤ ਹੋਣ ਯੋਗ ਨਹੀਂ ਰਹੇਗਾ!"
#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"\"%s\" ਤੇ ਕਲਿੱਕ ਕਰੋ ਜੇ ਤੁਸੀਂ ਇਸ ਹਾਰਡ ਡਰਾਈਵ ਤੇ ਸਾਰਾ ਡਾਟਾ ਅਤੇ ਭਾਗ\n"
"ਹਟਾਉਣਾ ਚਾਹੁੰਦੇ ਹੋ। ਧਿਆਨ ਰੱਖੋ, \"%s\" ਤੇ ਕਲਿੱਕ ਕਰਨ ਮਗਰੋਂ, ਤੁਸੀਂ ਇਸ ਡਰਾਈਵ\n"
"ਉੱਪਰਲਾ ਡਾਟਾ ਅਤੇ ਭਾਗ ਮੁੜ ਪ੍ਰਾਪਤ ਕਰ ਨਹੀਂ ਸਕਦੇ, ਕੋਈ Windows\n"
"ਡਾਟਾ ਵੀ।\n"
"\n"
"ਇਸ ਹਾਰਡ ਡਰਾਈਵ ਉੱਪਰਲਾ ਡਾਟਾ ਅਤੇ ਭਾਗ ਹਟਾਏ ਬਿਨਾਂ ਬਾਹਰ ਜਾਣ ਲਈ\n"
"\"%s\" ਤੇ ਕਲਿੱਕ ਕਰੋ।"
#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "ਅੱਗੇ ->"
#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- ਪਿੱਛੇ"
#: install2.pm:117
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"ਤੁਹਾਡੇ ਕਰਨਲ ਦੇ ਅਨੁਸਾਰੀ ਕਰਨਲ ਮੈਡਿਊਲਾਂ ਤੱਕ ਪਹੁੰਚ ਨਹੀਂ ਸਕਦਾ (ਫਾਇਲ %s ਗੁੰਮ ਹੈ), ਆਮ ਤੌਰ ਤੇ ਇਸ ਦਾ "
"ਮਤਲਬ ਹੈ ਤੁਹਾਡੀ ਬੂਟ ਫਲਾਪੀ ਇੰਸਟਾਲੇਸ਼ਨ ਮਾਧਿਅਮ ਨਾਲ ਸਮਕਾਲੀ ਨਹੀਂ ਹੈ (ਕਿਰਪਾ ਕਰਕੇ ਨਵੀਂ ਬੂਟ "
"ਫਲਾਪੀ ਬਣਾਓ)"
#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "ਤੁਹਾਨੂੰ %s ਵੀ ਫਾਰਮਿਟ ਕਰਨਾ ਜਰੂਰੀ ਹੈ"
#: install_any.pm:406
#, c-format
msgid "Do you have further supplementary media?"
msgstr "ਕੀ ਤੁਹਾਡੇ ਕੋਲ ਅੱਗੇ ਅਨੁਪੂਰਕ ਮਾਧਿਅਮ ਹੈ?"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:409
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"ਹੇਠਲਾ ਡਾਟਾ ਲੱਭਿਆ ਹੈ ਅਤੇ ਇੰਸਟਾਲ ਦੌਰਾਨ ਵਰਤਿਆ ਜਾਵੇਗਾ: %s।\n"
"\n"
"\n"
"ਕੀ ਤੁਹਾਡੇ ਕੋਲ ਸੰਰਚਨਾ ਕਰਨ ਲਈ ਅਨੁਪੂਰਕ ਇੰਸਟਾਲੇਸ਼ਨ ਮਾਧਿਅਮ ਹੈ?"
#: install_any.pm:422 printer/printerdrake.pm:3022
#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"
#: install_any.pm:422
#, c-format
msgid "Network (http)"
msgstr "ਨੈੱਟਵਰਕ (http)"
#: install_any.pm:422
#, c-format
msgid "Network (ftp)"
msgstr "ਨੈੱਟਵਰਕ (ftp)"
#: install_any.pm:451
#, c-format
msgid "Insert the CD 1 again"
msgstr "ਫਿਰ CD 1 ਪਾਓ"
#: install_any.pm:479 standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "ਕੋਈ ਜੰਤਰ ਨਹੀਂ ਲੱਭਿਆ"
#: install_any.pm:484
#, c-format
msgid "Insert the CD"
msgstr "CD ਪਾਓ"
#: install_any.pm:489
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "CD-ROM ਮਾਊਂਟ ਕਰਨ ਵਿੱਚ ਅਸਮਰਥ"
#: install_any.pm:521 install_any.pm:525
#, c-format
msgid "URL of the mirror?"
msgstr "ਪ੍ਰਤਿਬਿੰਬ ਦਾ URL?"
#: install_any.pm:558
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "ਇਸ ਪ੍ਰਤੀਬਿੰਬ ਤੇ ਪੈਕੇਜ ਸੂਚੀ ਫਾਇਲ ਨਹੀਂ ਲੱਭ ਸਕੀ। ਜਾਂਚ ਕਰੋ ਕਿ ਸਥਿਤੀ ਠੀਕ ਹੈ।"
#: install_any.pm:725
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"ਆਪਣੀ Cd-Rom ਤਬਦੀਲ ਕਰੋ!\n"
"ਕਿਰਪਾ ਕਰਕੇ \"%s\" ਲੇਬਲ ਵਾਲੀ Cd-Rom ਆਪਣੀ ਡਰਾਈਵ ਵਿੱਚ ਪਾਓ ਅਤੇ ਸਮਾਪਤੀ ਤੇ ਠੀਕ ਹੈ ਦਬਾਓ।"
#: install_any.pm:738
#, c-format
msgid "Copying in progress"
msgstr "ਨਕਲ ਜਾਰੀ ਹੈ"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:878
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:901
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"ਹੇਠਲੇ ਪੈਕੇਜ ਤੁਹਾਡੇ ਸਿਸਟਮ ਨਵੀਨੀਕਰਨ ਲਈ ਹਟਾਏ ਜਾਣਗੇ: %s\n"
"\n"
"\n"
"ਕੀ ਤੁਸੀਂ ਯਕੀਨਨ ਇਹ ਪੈਕੇਜ ਹਟਾਉਣੇ ਚਾਹੁੰਦੇ ਹੋ?\n"
#: install_any.pm:1349 partition_table.pm:603
#, c-format
msgid "Error reading file %s"
msgstr "ਫਾਇਲ %s ਪੜਨ ਵਿੱਚ ਗਲਤੀ"
#: install_any.pm:1559
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "ਹੇਠਲੀਆਂ ਡਿਸਕਾਂ ਦੇ ਨਾਂ ਤਬਦੀਲ ਕੀਤੇ ਹਨ:"
#: install_any.pm:1561
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (ਪਹਿਲਾਂ %s ਨਾਂ ਸੀ)"
#: install_any.pm:1599
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"ਇੱਕ ਗਲਤੀ ਹੋਈ ਹੈ - ਫਾਇਲ ਸਿਸਟਮ ਬਣਾਉਣ ਲਇ ਕੋਈ ਯੋਗ ਜੰਤਰ ਨਹੀਂ ਲੱਭਿਆ। ਕਿਰਪਾ ਕਰਕੇ ਇਸ ਸਮੱਸਿਆ ਲਈ "
"ਆਪਣੇ ਜੰਤਰ ਦੀ ਜਾਂਚ ਕਰੋ"
#: install_any.pm:1643
#, c-format
msgid "HTTP"
msgstr ""
#: install_any.pm:1643
#, fuzzy, c-format
msgid "FTP"
msgstr "FPU"
#: install_any.pm:1643
#, fuzzy, c-format
msgid "NFS"
msgstr "PFS"
#: install_any.pm:1666
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "ਕਿਰਪਾ ਕਰਕੇ ਬੈਕਅੱਪ ਲਈ ਮਾਧਿਅਮ ਚੁਣੋ।"
#: install_any.pm:1698
#, c-format
msgid "Bad media %s"
msgstr ""
#: install_any.pm:1710
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "ਫਾਇਲ ਪਹਿਲਾਂ ਮੌਜੂਦ ਹੈ, ਇਹ ਵਰਤੋ?"
#: install_any.pm:1761
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "ਵਿਭਾਗੀਕਰਨ ਤੋਂ ਪਹਿਲਾਂ ਪਰਦਾ-ਤਸਵੀਰ ਨਹੀਂ ਬਣਾ ਸਕਦਾ"
#: install_any.pm:1768
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "ਪਰਦਾ-ਤਸਵੀਰਾਂ %s ਵਿੱਚ ਇੰਸਟਾਲੇਸ਼ਨ ਤੋਂ ਬਾਅਦ ਉਪਲੱਬਧ ਹੋਣਗੀਆਂ"
#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "ਸਿਸਟਮ ਇੰਸਟਾਲੇਸ਼ਨ"
#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "ਸਿਸਟਮ ਸੰਰਚਨਾ"
#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"ਤੁਹਾਡੇ ਕੰਪਿਊਟਰ ਤੇ ਕੁਝ ਜੰਤਰ ਲਈ ਕੰਮ ਕਰਨ ਵਾਸਤੇ ``ਮਲਕੀਅਤ'' ਡਰਾਈਵਰ ਦੀ ਲੋੜ ਹੈ।\n"
"ਤੁਸੀਂ ਇਹਨਾਂ ਬਾਰੇ ਕੁਝ ਜਾਣਕਾਰੀ ਇਸ ਤੇ ਲੱਭ ਸਕਦੇ ਹੋ: %s"
#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"ਤੁਹਾਡੇ ਕੋਲ ਰੂਟ (root) ਭਾਗ ਹੋਣਾ ਜਰੂਰੀ ਹੈ।\n"
"ਇਸ ਲਈ, ਇੱਕ ਭਾਗ ਬਣਾਓ (ਜਾਂ ਮੌਜੂਦਾ ਤੇ ਕਲਿੱਕ ਕਰੋ)।\n"
"ਫਿਰ ``ਮਾਊਂਟ ਸਥਿਤੀ'' ਚੁਣੋ ਇਸ ਨੂੰ `/' ਨਿਰਧਾਰਿਤ ਕਰੋ।"
#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"ਤੁਹਾਡੇ ਕੋਲ ਸਵੈਪ ਭਾਗ ਨਹੀਂ ਹੈ।\n"
"\n"
"ਕਿਸੇ ਤਰਾਂ ਜਾਰੀ ਕਰੋ?"
#: install_interactive.pm:70 install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "ਤੁਹਾਡੇ ਕੋਲ /boot/efi ਵਿੱਚ ਮਾਊਂਟ ਕੀਤਾ FAT ਭਾਗ ਹੋਣਾ ਜਰੂਰੀ ਹੈ"
#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "ਨਵੇਂ ਭਾਗ ਨਿਰਧਾਰਿਤ ਕਰਨ ਲਈ ਲੋੜੀਂਦੀ ਖਾਲੀ ਥਾਂ ਨਹੀਂ ਹੈ"
#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "ਮੌਜੂਦਾ ਭਾਗ ਵਰਤੋ"
#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ਇੱਥੇ ਵਰਤਣ ਲਈ ਕੋਈ ਮੋਜੂਦਾ ਭਾਗ ਨਹੀਂ ਹੈ"
#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "ਲੂਪਬੈਕ ਲਈ Windows ਭਾਗ ਵਰਤੋ"
#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "ਤੁਸੀਂ ਕਿਹੜਾ ਭਾਗ Linux4Win ਲਈ ਵਰਤਣਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "ਅਕਾਰ ਚੁਣੋ"
#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "ਮੈਬਾ ਵਿੱਚ ਪ੍ਰਬੰਧਕ (root) ਭਾਗ ਅਕਾਰ:"
#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "ਮੈਬਾ ਵਿੱਚ ਸਵੈਪ ਭਾਗ ਅਕਾਰ:"
#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "ਇੱਥੇ ਲੂਪਬੈਕ ਲਈ ਵਰਤਣ ਵਾਸਤੇ ਕੋਈ FAT ਭਾਗ ਨਹੀਂ ਹੈ (ਜਾਂ ਲੋੜੀਂਦੀ ਬਾਕੀ ਥਾਂ ਨਹੀਂ ਹੈ)"
#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "ਤੁਸੀਂ ਕਿਹੜਾ ਭਾਗ ਅਕਾਰ ਤਬਦੀਲ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT ਮੁੜ-ਅਕਾਰ ਜੰਤਰ ਤੁਹਾਡੇ ਭਾਗ ਦੇ ਪ੍ਰਬੰਧਨ ਲਈ ਅਸਮਰਥ ਹੈ, \n"
"ਹੇਠਲੀ ਗਲਤੀ ਹੋਈ ਹੈ: %s"
#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Windows ਭਾਗ ਦਾ ਅਕਾਰ ਪਤਾ ਕਰ ਰਿਹਾ ਹੈ"
#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"ਤੁਹਾਡਾ Windows ਭਾਗ ਬਹੁਤ ਫਰੈਗਮਿੰਟਡ ਹੈ। ਕਿਰਪਾ ਕਰਕੇ ਆਪਣਾ ਕੰਪਿਊਟਰ Windows ਅਧੀਨ ਮੁੜ ਚਲਾਓ, "
"``defrag'' ਸਹੂਲਤ ਚਲਾਓ, ਫਿਰ ਮੈਂਡਰਿਵ-ਲੀਨਕਸ ਇੰਸਟਾਲੇਸ਼ਨ ਮੁੜ ਚਲਾਓ।"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "ਤੁਸੀਂ Windows ਰੱਖਣ ਲਈ ਕਿਹੜਾ ਅਕਾਰ ਚਾਹੁੰਦੇ ਹੋ"
#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "ਭਾਗ %s"
#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Windows ਭਾਗ ਮੁੜ-ਅਕਾਰ ਜਾਰੀ"
#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT ਮੁੜ-ਅਕਾਰ ਅਸਫਲ: %s"
#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "ਇੱਥੇ ਮੁੜ ਅਕਾਰ ਲਈ ਕੋਈ FAT ਭਾਗ ਨਹੀਂ ਹੈ (ਜਾਂ ਬਾਕੀ ਲੋੜੀਂਦੀ ਖਾਲੀ ਥਾਂ ਨਹੀਂ ਹੈ)"
#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Windows(TM) ਹਟਾਓ"
#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "ਤੁਹਾਡੇ ਕੋਲ ਇੱਕ ਤੋਂ ਜਿਆਦਾ ਹਾਰਡ ਡਰਾਈਵਾਂ ਹਨ, ਤੁਸੀਂ ਕਿਸ ਤੇ ਲੀਨਕਸ ਇੰਸਟਾਲ ਕਰਨਾ ਹੈ?"
#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ਡਰਾਈਵ %s ਤੇ ਸਭ ਮੌਜੂਦ ਭਾਗ ਅਤੇ ਉਹਨਾਂ ਦਾ ਡਾਟਾ ਗੁੰਮ ਹੋ ਜਾਵੇਗਾ"
#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "fdisk ਵਰਤੋ"
#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"ਤੁਸੀਂ ਹੁਣ %s ਦਾ ਵਿਭਾਗੀਕਰਨ ਕਰ ਸਕਦੇ ਹੋ।\n"
"ਜਦੋਂ ਤੁਸੀਂ ਸਮਾਪਤ ਕੀਤਾ, `w' ਵਰਤ ਕੇ ਸੰਭਾਲਣਾ ਨਾ ਭੁਲਣਾ।"
#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "ਮੈਂ ਇੰਸਟਾਲ ਕਰਨ ਲਈ ਕੋਈ ਥਾਂ ਨਹੀਂ ਲੱਭ ਸਕਿਆ"
#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX ਵਿਭਾਗੀਕਰਨ ਤਖਤੀ ਨੇ ਹੇਠਲੇ ਹੱਲ ਲੱਭੇ ਹਨ:"
#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "ਵਿਭਾਗੀਕਰਨ ਅਸਫਲ: %s"
#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "ਨੈੱਟਵਰਕ ਚਲਾਇਆ ਜਾ ਰਿਹਾ ਹੈ"
#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "ਨੈੱਟਵਰਕ ਬੰਦ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandriva Linux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A. \n"
msgstr ""
#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"ਚੇਤਾਵਨੀ: ਮੁਕਤ ਸਾਫਟਵੇਅਰ ਪੇਟਿੰਟ ਮੁਕਤ ਹੋਣੇ ਜਰੂਰੀ ਨਹੀਂ ਹੋ ਸਕਦੇ, ਅਤੇ ਕੁਝ ਸ਼ਾਮਿਲ ਮੁਕਤ\n"
"ਸਾਫਟਵੇਅਰ ਤੁਹਾਡੇ ਦੇਸ਼ ਵਿੱਚ ਪੇਟਿੰਟ ਦੁਆਰਾ ਸ਼ਾਮਿਲ ਕੀਤੇ ਹਨ। ਉਦਾਹਰਨ ਲਈ, ਸ਼ਾਮਿਲ MP3\n"
"ਡੀਕੋਡਰਾਂ ਨੂੰ ਅੱਗੇ ਵਰਤੋਂ ਲਈ ਲਾਈਸਿੰਸ ਦੀ ਲੋੜ ਪੈ ਸਕਦੀ ਹੈ (ਵਧੇਰੇ ਜਾਣਕਾਰੀ ਲਈ\n"
"http://www.mp3licensing.com ਵੇਖੋ)। ਜੇ ਤੁਹਾਨੂੰ ਯਕੀਨ ਨਹੀਂ ਕਿ ਤੁਹਾਡਾ \n"
"ਪੇਟਿੰਟ ਤੁਹਾਨੂੰ ਉਪਲੱਬਧ ਹੋ ਸਕਦਾ ਹੈ, ਆਪਣੇ ਲੋਕਲ ਨਿਯਮਾਂ ਦੀ ਜਾਂਚ ਕਰੋ।"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
|