package detect_devices; # $Id$

use diagnostics;
use strict;

#-######################################################################################
#- misc imports
#-######################################################################################
use log;
use common qw(:common :file :functional);
use devices;
use c;

#-#####################################################################################
#- Globals
#-#####################################################################################
my @netdevices = map { my $l = $_; map { "$l$_" } (0..3) } qw(eth tr fddi plip);
my %serialprobe = ();
my $usb_interface = undef;

#-######################################################################################
#- Functions
#-######################################################################################
sub get {
    #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
    #- SCSI and RAID devices on the same machine. From what I see so far, the default
    #- BIOS boot harddrive will be
    #- 1. The first IDE device if IDE exists. Or
    #- 2. The first SCSI device if SCSI exists. Or
    #- 3. The first RAID device if RAID exists.

    map { &{$_->[0]}() ? &{$_->[1]}() : () }
    [ \&hasIDE, \&getIDE ],
    [ \&hasSCSI, \&getSCSI ],
    [ \&hasDAC960, \&getDAC960 ],
    [ \&hasCompaqSmartArray, \&getCompaqSmartArray ];
}
sub hds() { grep { $_->{type} eq 'hd' && ($::isStandalone || !isRemovableDrive($_)) } get(); }
sub zips() { grep { $_->{type} =~ /.d/ && isZipDrive($_) } get(); }
sub ide_zips() { grep { $_->{type} =~ /.d/ && isZipDrive($_) } getIDE(); }
#-sub jazzs() { grep { $_->{type} =~ /.d/ && isJazDrive($_) } get(); }
sub ls120s() { grep { $_->{type} =~ /.d/ && isLS120Drive($_) } get(); }
sub usbfdus() { grep { $_->{type} =~ /.d/ && isUSBFDUDrive($_) } get(); }
sub cdroms() { 
    my @l = grep { $_->{type} eq 'cdrom' } get(); 
    if (my @l2 = IDEburners()) {
	require modules;
	modules::add_alias('scsi_hostadapter', 'ide-scsi');
	my $nb = 1 + max(-1, map { $_->{device} =~ /scd (\d+)/x } @l);
	foreach my $i (@l2) {	    
	    log::l("IDEBurner: $i->{device}");
	    my ($e) = grep { $_->{device} eq $i->{device} } @l;
	    $e->{device} = "scd" . $nb++;
	}
    }
    @l;
}
sub burners { grep { isBurner($_->{device}) } cdroms() }
sub IDEburners { grep { $_->{type} eq 'cdrom' && isBurner($_->{device}) } getIDE() }

sub floppies() {
    require modules;
    my @ide = map { $_->{device} } ls120s() and modules::load("ide-floppy");
    my @scsi = map { $_->{device} } usbfdus();
    (@ide, @scsi, grep { tryOpen($_) } qw(fd0 fd1));
}
sub floppy { first(floppies()) }
#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"

sub isBurner { my $f = tryOpen($_[0]); $f && c::isBurner(fileno($f)) }
sub isZipDrive { $_[0]->{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
#-sub isJazzDrive { $_[0]->{info} =~ /JAZZ?\s+/ } #- untested.
sub isLS120Drive { $_[0]->{info} =~ /LS-?120|144MB/ }
sub isUSBFDUDrive { $_[0]->{info} =~ /USB-?FDU/ }
sub isRemovableDrive { &isZipDrive || &isLS120Drive || &isUSBFDUDrive } #-or &isJazzDrive }

sub hasSCSI() {
    local *F; open F, "/proc/scsi/scsi" or return 0;
    local $_;
    while (<F>) {
	/devices: none/ and log::l("no scsi devices are available"), return 0;
    }
#-    log::l("scsi devices are available");
    1;
}
sub hasIDE() { -e "/proc/ide" }
sub hasDAC960() { 1 }
sub hasCompaqSmartArray() { -r "/proc/array/ida0" }

sub isFloppyOrHD {
    my ($dev) = @_;
    require partition_table_raw;
    my $geom = partition_table_raw::get_geometry(devices::make($dev));
    $geom->{totalsectors} < 10 << 11 ? 'floppy' : 'hd';
}

sub getSCSI() {
    my @drives;
    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
    my $err = sub { chop; die "unexpected line in /proc/scsi/scsi: $_"; };
    local $_;

    local *F;
    open F, "/proc/scsi/scsi" or die "failed to open /proc/scsi/scsi";
    local $_ = <F>; /^Attached devices:/ or return &$err();
    while ($_ = <F>) {
	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
	my $device;
	if ($type =~ /Direct-Access/) { #- what about LS-120 floppy drive, assuming there are Direct-Access...
	    $device = "sd" . chr($driveNum++ + ord('a'));
	    $type = isFloppyOrHD($device);
	} elsif ($type =~ /Sequential-Access/) {
	    $device = "st" . $tapeNum++;
	    $type = 'tape';
	} elsif ($type =~ /CD-ROM/) {
	    $device = "scd" . $cdromNum++;
	    $type = 'cdrom';
	}
	$device and push @drives, { device => $device, type => $type, info => "$vendor $model", id => $id, bus => 0 };
    }
    @drives;
}

sub getIDE() {
    my @idi;

    #- what about a system with absolutely no IDE on it, like some sparc machine.
    hasIDE() or return ();

    #- Great. 2.2 kernel, things are much easier and less error prone.
    foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
	my ($t) = chop_(cat_("$d/media"));
	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
	my ($info) = chop_(cat_("$d/model")); $info ||= "(none)";

	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
	push @idi, { type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
    }
    @idi;
}

sub getCompaqSmartArray() {
    my @idi;
    my $f;

    for (my $i = 0; -r ($f = "/proc/array/ida$i"); $i++) {
	foreach (cat_($f)) {
	    if (m|^(ida/.*?):|) {
		push @idi, { device => $1, info => "Compaq RAID logical disk", type => 'hd' };
		last;
	    }
	}
    }
    @idi;
}

sub getDAC960() {
    my %idi;

    #- We are looking for lines of this format:DAC960#0:
    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
    foreach (syslog()) {
	my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
	$idi{$device} = { info => $info, type => 'hd', device => $device };
	log::l("DAC960: $device ($info)");
    }
    values %idi;
}

sub getNet() {
    grep { !($::isStandalone && /plip/) && c::hasNetDevice($_) } @netdevices;
}

sub pci_probe {
    my ($probe_type) = @_;
    map {
	my %l;
	@l{qw(vendor id subvendor subid type driver description)} = split "\t";
	$l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
	$l{bus} = 'PCI';
	\%l
    } c::pci_probe($probe_type);    
}

sub usb_probe {
    -e "/proc/bus/usb/devices" or return ();

    map {
	my %l;
	@l{qw(vendor id type driver description)} = split "\t";
	$l{$_} = hex $l{$_} foreach qw(vendor id);
	$l{bus} = 'USB';
	\%l
    } c::usb_probe();
}

# pci_probe with $probe_type is unsafe for pci! (bug in kernel&hardware)
# get_pcmcia_devices provides field "device", used in network.pm
# => probeall with $probe_type is unsafe
sub probeall {
    my ($probe_type) = @_;
    require sbus_probing::main;
    require modules;
    pci_probe($probe_type), usb_probe(), sbus_probing::main::probe(), modules::get_pcmcia_devices();
}
sub matching_desc {
    my ($regexp) = @_;
    grep { $_->{description} =~ /$regexp/i } probeall();
}
sub stringlist { 
    map { " $_->{description} ($_->{type} $_->{driver})" . ($_->{subid} ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '') } probeall(1); 
}
sub check {
    my ($l) = @_;
    my $ok = $l->{driver} !~ /(unknown|ignore)/;
    $ok or log::l("skipping $l->{description}, no module available (if you know one, please mail bugs\@linux-mandrake.com)");
    $ok
}


sub tryOpen($) {
    local *F;
    sysopen F, devices::make($_[0]), c::O_NONBLOCK() and *F;
}

sub tryWrite($) {
    local *F;
    sysopen F, devices::make($_[0]), 1 | c::O_NONBLOCK() and *F;
}

sub syslog {
    -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
    `dmesg`;
}

sub hasSMP { c::detectSMP() }

sub hasUltra66 {
    die "hasUltra66 deprecated";
    #- keep it BUT DO NOT USE IT as now included in kernel.
    cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;

    my @l = map { $_->{verbatim} } matching_desc('HPT|Ultra66') or return;
    
    my $ide = sprintf "ide2=0x%x,0x%x ide3=0x%x,0x%x",
      @l == 2 ?
	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..4] } @l) :
	(map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..6] } @l);

    log::l("HPT|Ultra66: found $ide");
    $ide;
}

sub whatParport() {
    my @res =();
    foreach (0..3) {
	my $elem = {};
	local *F; open F, "/proc/parport/$_/autoprobe" or next;
	local $_;
	while (<F>) { $elem->{$1} = $2 if /(.*):(.*);/ }
	push @res, { port => "/dev/lp$_", val => $elem};
    }
    @res;
}

sub usbMice      { grep { $_->{type} =~ /\|Mouse/ } usb_probe() }
sub usbKeyboards { grep { $_->{type} =~ /\|Keyboard/ } usb_probe() }
sub usbZips      { grep { $_->{type} =~ /Mass Storage\|/ } usb_probe() }

sub whatUsbport() {
    my ($i, $elem, @res) = (0, {});
    local *F; open F, "/proc/bus/usb/devices" or return;
    local $_;
    while (<F>) {
	$elem->{$1} = $2 if /S:\s+(.*)=(.*\S)/;
	if (/I:.*Driver=(printer|usblp)/ && $elem->{Manufacturer} && $elem->{Product}) {
	    my $MF = ${{ 'Hewlett-Packard' => 'HP' }}{$elem->{Manufacturer}} || $elem->{Manufacturer};
	    push @res, { port => "/dev/usb/lp$i", val => { CLASS => 'PRINTER',
							   MODEL => $elem->{Product},
							   MANUFACTURER => $elem->{Manufacturer},
							   DESCRIPTION => "$MF $elem->{Product}",
							 }};
	    $i++; $elem = {}; #- try next one, but blank what has been probed.
	}
    }
    @res;
}

#-CLASS:PRINTER;
#-MODEL:HP LaserJet 1100;
#-MANUFACTURER:Hewlett-Packard;
#-DESCRIPTION:HP LaserJet 1100 Printer;
#-COMMAND SET:MLC,PCL,PJL;
sub whatPrinter() {
    my @res = (whatParport(), whatUsbport());
    grep { $_->{val}{CLASS} eq "PRINTER"} @res;
}

sub whatPrinterPort() {
    grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0);
}

sub probeSerialDevices {
    #- make sure the device are created before probing.
    foreach (0..3) { devices::make("/dev/ttyS$_") }

    #- for device already probed, we can safely (assuming device are
    #- not moved during install :-)
    #- include /dev/mouse device if using an X server.
    -d "/var/lock" or mkdir "/var/lock", 0755;
    -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
    foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }

    print STDERR "Please wait while probing serial ports...\n";
    #- start probing all serial ports... really faster than before ...
    #- ... but still take some time :-)
    local *F; open F, "serial_probe 2>/dev/null |";
    local $_;
    my %current = (); while (<F>) {
	$serialprobe{$current{DEVICE}} = { %current } and %current = () if /^\s*$/ && $current{DEVICE};
	$current{$1} = $2 if /^([^=]+)=(.*?)\s*$/;
    }
    close F;

    foreach (values %serialprobe) {
	$_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
	$_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
	log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
    }
}

sub probeSerial($) { $serialprobe{$_[0]} }

sub hasModem($) {
    $serialprobe{$_[0]} and $serialprobe{$_[0]}{CLASS} eq 'MODEM' and $serialprobe{$_[0]}{DESCRIPTION};
}

sub hasMousePS2 {
    my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
}

#-######################################################################################
#- Wonderful perl :(
#-######################################################################################
1; #