package Xconfigurator; # $Id$ use common qw(:common); %depths = ( 8 => __("256 colors (8 bits)"), 15 => __("32 thousand colors (15 bits)"), 16 => __("65 thousand colors (16 bits)"), 24 => __("16 million colors (24 bits)"), 32 => __("4 billion colors (32 bits)"), ); @depths = ikeys(%depths); @resolutions = qw(640x480 800x600 1024x768 1152x864 1280x1024 1600x1200); @window_managers = ('kdeinit: kwin', qw(gnome-session icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish)); %serversdriver = arch() =~ /^sparc/ ? ( 'Mach64' => "accel", '3DLabs' => "accel", 'Sun' => "fbdev", 'Sun24' => "fbdev", 'SunMono' => "fbdev", 'VGA16' => "vga16", 'FBDev' => "fbdev", ) : ( 'SVGA' => "svga", #- 'Rage128' => "svga", #- '3dfx' => "svga", 'S3' => "accel", 'Mach32' => "accel", 'Mach8' => "accel", '8514' => "accel", 'P9000' => "accel", 'AGX' => "accel", 'W32' => "accel", 'Mach64' => "accel", 'I128' => "accel", 'S3V' => "accel", '3DLabs' => "accel", 'Mono' => "vga2", 'VGA16' => "vga16", 'FBDev' => "fbdev", ); @svgaservers = grep { $serversdriver{$_} eq "svga" } keys(%serversdriver); @accelservers = grep { $serversdriver{$_} eq "accel" } keys(%serversdriver); @allbutfbservers = grep { arch() =~ /^sparc/ || $serversdriver{$_} ne "fbdev" } keys(%serversdriver); @allservers = keys(%serversdriver); %vgamodes = ( '640xx8' => 769, '640x480x8' => 769, '800xx8' => 771, '800x600x8' => 771, '1024xx8' => 773, '1024x768x8' => 773, '1280xx8' => 775, '1280x1024x8' => 775, '640xx15' => 784, '640x480x15' => 784, '800xx15' => 787, '800x600x15' => 787, '1024xx15' => 790, '1024x768x15' => 790, '1280xx15' => 793, '1280x1024x15' => 793, '640xx16' => 785, '640x480x16' => 785, '800xx16' => 788, '800x600x16' => 788, '1024xx16' => 791, '1024x768x16' => 791, '1280xx16' => 794, '1280x1024x16' => 794, #- '640xx24' => 786, #- there is a problem with these resolutions since the BIOS may take 24 or 32 planes. #- '640x480x24' => 786, #- '800xx24' => 789, #- '800x600x24' => 789, #- '1024xx24' => 792, #- '1024x768x24' => 792, #- '1280xx24' => 795, #- '1280x1024x24' => 795, ); { #- @monitorSize2resolution my %l = my @l = ( #- size in inch 13 => "640x480", 14 => "800x600", 15 => "800x600", 16 => "1024x768", 17 => "1024x768", 18 => "1024x768", 19 => "1280x1024", 20 => "1280x1024", 21 => "1600x1200", ); for (my $i = 0; $i < $l[0]; $i++) { $monitorSize2resolution[$i] = $l[1]; } while (my ($s, $r) = each %l) { $monitorSize2resolution[$s] = $r; } } %videomemory = ( __("256 kB") => 256, __("512 kB") => 512, __("1 MB") => 1024, __("2 MB") => 2048, __("4 MB") => 4096, __("8 MB") => 8192, __("16 MB or more") => 16384, ); $good_default_monitor = "High Frequency SVGA, 1024x768 at 70 Hz"; $low_default_monitor = "Super VGA, 800x600 at 56 Hz"; %standard_monitors = ( __("Standard VGA, 640x480 at 60 Hz") => [ '640x480@60', "31.5" , "60" ], __("Super VGA, 800x600 at 56 Hz") => [ '800x600@56', "31.5-35.1" , "55-60" ], __("8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)") => [ '8514 compatible', "31.5,35.5" , "60,70,87" ], __("Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz") => [ '1024x768@87i', "31.5,35.15,35.5" , "55-90" ], __("Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz") => [ '800x600@60', "31.5-37.9" , "55-90" ], __("Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz") => [ '1024x768@60', "31.5-48.5" , "55-90" ], __("High Frequency SVGA, 1024x768 at 70 Hz") => [ '1024x768@70', "31.5-57.0" , "50-90" ], __("Multi-frequency that can do 1280x1024 at 60 Hz") => [ '1280x1024@60', "31.5-64.3" , "50-90" ], __("Multi-frequency that can do 1280x1024 at 74 Hz") => [ '1280x1024@74', "31.5-79.0" , "50-100" ], __("Multi-frequency that can do 1280x1024 at 76 Hz") => [ '1280x1024@76', "31.5-82.0" , "40-100" ], __("Monitor that can do 1600x1200 at 70 Hz") => [ '1600x1200@70', "31.5-88.0" , "50-120" ], __("Monitor that can do 1600x1200 at 76 Hz") => [ '1600x1200@76', "31.5-94.0" , "50-160" ], ); @vsyncranges = ("50-70", "50-90", "50-100", "40-150"); @hsyncranges = ( "31.5", "31.5-35.1", "31.5, 35.5", "31.5, 35.15, 35.5", "31.5-37.9", "31.5-48.5", "31.5-57.0", "31.5-64.3", "31.5-79.0", "31.5-82.0", "31.5-88.0", "31.5-94.0", ); %min_hsync4wres = ( 640 => 31.5, 800 => 35.1, 1024 => 35.5, 1152 => 44.0, 1280 => 51.0, 1600 => 75.0, ); %lines = ( #- 'Cirrus Logic|GD 5446' => [ ' Option "no_bitblt"' ], 'Silicon Integrated Systems [SiS]|86C326' => [ qq( Option "noaccel"\n Option "sw_cursor") ], #- 'Trident Microsystems|Cyber 9525' => [ ' Option "noaccel"' ], #- 'S3 Inc.|86c368 [Trio 3D/2X]' => [ ' ChipID 0x8a10' ], ); #- most usefull XFree86-4.0.1 server options. Default values is the first ones. @options_serverflags = ( 'NoTrapSignals' => [ "Off", "On" ], 'DontZap' => [ "Off", "On" ], 'DontZoom' => [ "Off", "On" ], 'DisableVidModeExtension' => [ "Off", "On" ], 'AllowNonLocalXvidtune' => [ "Off", "On" ], 'DisableModInDev' => [ "Off", "On" ], 'AllowNonLocalModInDev' => [ "Off", "On" ], 'AllowMouseOpenFail' => [ "False", "True" ], 'VTSysReq' => [ "Off", "On" ], 'BlankTime' => [ "10", "5", "3", "15", "30" ], 'StandByTime' => [ "20", "10", "6", "30", "60" ], 'SuspendTime' => [ "30", "15", "9", "45", "90" ], 'OffTime' => [ "40", "20", "12", "60", "120" ], 'Pixmap' => [ "32", "24" ], 'PC98' => [ "auto-detected", "False", "True" ], 'NoPM' => [ "False", "True" ], ); #- most usefull server options have to be accessible at the beginning, since #- no more than a small set of options will be available for the user, maybe ? @options = ( [ 'DPMS', 'XFree86', '.*' ], [ 'SyncOnGreen', 'XFree86', '.*' ], [ 'power_saver', 'Mono', '.*' ], [ 'hibit_low', 'VGA16', 'Tseng.*ET4000' ], [ 'hibit_high', 'VGA16', 'Tseng.*ET4000' ], [ 'power_saver', 'VGA16', '.*' ], [ 'noaccel', 'SVGA', 'Cirrus|C&T|SiS|Oak|Western Digital|Alliance|Trident|Tseng' ], [ 'no_accel', 'SVGA', 'ARK|MGA|i740|Oak|ET6000|W32|Media.*GX|Neomagic' ], [ 'linear', 'SVGA', 'Cirrus|ET6000|ET4000/W32p rev [CD]|Oak|Neomagic|Triden|Tseng' ], [ 'nolinear', 'SVGA', 'Cirrus|C&T|Trident' ], [ 'no_linear', 'SVGA', 'ARK|SiS|Neomagic|Tseng' ], [ 'no_bitblt', 'SVGA', 'Cirrus|C&T|SiS' ], [ 'no_imageblt', 'SVGA', 'Cirrus|C&T|SiS' ], [ 'sw_cursor', 'SVGA', '.*' ], [ 'slow_dram', 'SVGA', 'Cirrus|Trident|ET6000|W32|Western Digital|Tseng' ], [ 'mga_sdram', 'SVGA', 'MGA' ], [ 'no_pixmap_cache', 'SVGA', 'ARK|Cirrus|C&T|MGA|SiS|Trident.*9440|Trident.*9680|Tseng' ], [ 'no_mmio', 'SVGA', 'Cirrus|Neomagic|Trident' ], [ 'pci_burst_off', 'SVGA', 'ET6000|W32|Trident|Tseng' ], [ 'hw_clocks', 'SVGA', 'SiS|C&T' ], [ 'use_modeline', 'SVGA', 'C&T' ], [ 'enable_bitblt', 'SVGA', 'Oak' ], [ 'w32_interleave_off', 'SVGA', 'ET6000|W32|Tseng' ], [ 'fifo_conservative', 'SVGA', 'Cirrus|ARK|SiS|Oak' ], [ 'fifo_moderate', 'SVGA', 'Cirrus|ARK|SiS' ], [ 'all_wait', 'SVGA', 'Oak' ], [ 'one_wait', 'SVGA', 'Oak' ], [ 'first_wait', 'SVGA', 'Oak' ], [ 'first_wwait', 'SVGA', 'Oak' ], [ 'write_wait', 'SVGA', 'Oak' ], [ 'read_wait', 'SVGA', 'Oak' ], [ 'clgd6225_lcd', 'SVGA', 'Cirrus' ], [ 'fix_panel_size', 'SVGA', 'C&T' ], [ 'lcd_center', 'SVGA', 'C&T|Neomagic|Trident' ], [ 'cyber_shadow', 'SVGA', 'Trident' ], [ 'STN', 'SVGA', 'C&T' ], [ 'no_stretch', 'SVGA', 'C&T|Cirrus|Neomagic|Trident' ], [ 'no_prog_lcd_mode_regs', 'SVGA', 'Neomagic' ], [ 'prog_lcd_mode_stretch', 'SVGA', 'Neomagic' ], [ 'suspend_hack', 'SVGA', 'C&T' ], [ 'use_18bit_bus', 'SVGA', 'C&T' ], [ 'hibit_low', 'SVGA', 'Tseng.*ET4000' ], [ 'hibit_high', 'SVGA', 'Tseng.*ET4000' ], [ 'probe_clocks', 'SVGA', 'Cirrus' ], [ 'power_saver', 'SVGA', '.*' ], [ 'use_vlck1', 'SVGA', 'C&T' ], [ 'sgram', 'SVGA', 'i740' ], [ 'sdram', 'SVGA', 'i740' ], [ 'no_2mb_banksel', 'SVGA', 'Cirrus' ], [ 'tgui_pci_read_on', 'SVGA', 'Trident' ], [ 'tgui_pci_write_on', 'SVGA', 'Trident' ], [ 'no_program_clocks', 'SVGA', 'Trident' ], [ 'mmio', 'SVGA', 'Cirrus|C&T|Neomagic' ], [ 'sync_on_green', 'SVGA', 'C&T|MGA' ], [ 'pci_retry', 'SVGA', 'Tseng|MGA|Cirrus' ], [ 'hw_cursor', 'SVGA', 'C&T|SiS|ARK|ET6000|i740|Tseng' ], [ 'xaa_no_color_exp', 'SVGA', 'C&T|Cirrus|Trident|Tseng' ], [ 'xaa_benchmarks', 'SVGA', 'C&T' ], [ 'pci_burst_on', 'SVGA', 'Trident|Tseng' ], [ 'prog_lcd_mode_regs', 'SVGA', 'Neomagic' ], [ 'no_prog_lcd_mode_stretch', 'SVGA', 'Neomagic' ], [ 'no_wait', 'SVGA', 'Oak' ], #- [ 'med_dram', 'SVGA', 'Cirrus|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD #- [ 'fast_dram', 'SVGA', 'C&T|Cirrus|ET[46]000|Trident|Western Digital' ], #- WARNING, MAY DAMAGE CARD #- [ 'fast_vram', 'SVGA', 'SiS' ], #- WARNING, MAY DAMAGE CARD #- [ 'clock_50', 'SVGA', 'Oak' ], #- WARNING, MAY DAMAGE CARD #- [ 'clock_66', 'SVGA', 'Oak' ], #- WARNING, MAY DAMAGE CARD #- [ 'fifo_aggressive', 'SVGA', 'Cirrus|ARK|SiS|Oak' ], #- WARNING, MAY DAMAGE CARD #- [ 'override_validate_mode', 'SVGA', 'Neomagic' ], #- WARNING, MAY DAMAGE CARD #- [ 'tgui_mclk_66', 'SVGA', 'Trident' ], #- WARNING, MAY DAMAGE CARD #- [ 'favour_bitblt', 'SVGA', 'Cirrus' ], #- OBSELETE [ 'sw_cursor', '3DLabs', '.*' ], [ 'no_pixmap_cache', '3DLabs', '.*' ], [ 'no_accel', '3DLabs', '.*' ], [ 'firegl_3000', '3DLabs', '.*' ], [ 'sync_on_green', '3DLabs', '.*' ], [ 'pci_retry', '3DLabs', '.*' ], #- [ 'overclock_mem', '3DLabs', '.*' ], #- WARNING, MAY DAMAGE CARD [ 'dac_8_bit', 'I128', '.*' ], [ 'no_accel', 'I128', '.*' ], [ 'sync_on_green', 'I128', '.*' ], [ 'composite', 'Mach32', '.*' ], [ 'sw_cursor', 'Mach32', '.*' ], [ 'dac_8_bit', 'Mach32', '.*' ], [ 'ast_mach32', 'Mach32', '.*' ], [ 'intel_gx', 'Mach32', '.*' ], [ 'no_linear', 'Mach32', '.*' ], [ 'sw_cursor', 'Mach64', '.*' ], [ 'nolinear', 'Mach64', '.*' ], [ 'no_block_write', 'Mach64', '.*' ], [ 'block_write', 'Mach64', '.*' ], [ 'fifo_conservative', 'Mach64', '.*' ], [ 'no_font_cache', 'Mach64', '.*' ], [ 'no_pixmap_cache', 'Mach64', '.*' ], [ 'composite', 'Mach64', '.*' ], [ 'power_saver', 'Mach64', '.*' ], [ 'no_program_clocks', 'Mach64', '.*' ], [ 'no_bios_clocks', 'Mach64', '.*' ], [ 'dac_6_bit', 'Mach64', '.*' ], [ 'dac_8_bit', 'Mach64', '.*' ], [ 'hw_cursor', 'Mach64', '.*' ], #- [ 'override_bios', 'Mach64', '.*' ], #- WARNING, MAY DAMAGE CARD [ 'sw_cursor', 'P9000', '.*' ], [ 'noaccel', 'P9000', '.*' ], [ 'sync_on_green', 'P9000', '.*' ], [ 'vram_128', 'P9000', '.*' ], [ 'nolinear', 'S3', '.*' ], [ 'dac_8_bit', 'S3', '.*' ], [ 'slow_vram', 'S3', 'S3.*964' ], [ 'stb_pegasus', 'S3', 'S3.*928' ], [ 'SPEA_Mercury', 'S3', 'S3.*(928|964)' ], [ 'number_nine', 'S3', 'S3.*(864|928)' ], [ 'lcd_center', 'S3', 'S3.*Aurora64V' ], [ 'noaccel', 'S3V', '.*' ], [ 'slow_edodram', 'S3V', '.*' ], [ 'pci_burst_on', 'S3V', '.*' ], [ 'early_ras_precharge', 'S3V', '.*' ], [ 'late_ras_precharge', 'S3V', '.*' ], [ 'fifo_conservative', 'S3V', '.*' ], [ 'fifo_aggressive', 'S3V', '.*' ], [ 'fifo_moderate', 'S3V', '.*' ], [ 'lcd_center', 'S3V', 'S3.*ViRGE\/MX' ], [ 'hw_cursor', 'S3V', '.*' ], [ 'pci_retry', 'S3V', '.*' ], [ 'dac_6_bit', 'AGX', '.*' ], [ 'dac_8_bit', 'AGX', '.*' ], [ 'sync_on_green', 'AGX', '.*' ], [ '8_bit_bus', 'AGX', '.*' ], [ 'wait_state', 'AGX', '.*' ], [ 'no_wait_state', 'AGX', '.*' ], [ 'noaccel', 'AGX', '.*' ], [ 'crtc_delay', 'AGX', '.*' ], [ 'fifo_conserv', 'AGX', '.*' ], [ 'fifo_aggressive', 'AGX', '.*' ], [ 'fifo_moderate', 'AGX', '.*' ], [ 'vram_delay_latch', 'AGX', '.*' ], [ 'vram_delay_ras', 'AGX', '.*' ], [ 'vram_extend_ras', 'AGX', '.*' ], [ 'slow_dram', 'AGX', '.*' ], [ 'slow_vram', 'AGX', '.*' ], [ 'med_dram', 'AGX', '.*' ], [ 'med_vram', 'AGX', '.*' ], [ 'fast_dram', 'AGX', '.*' ], [ 'fast_vram', 'AGX', '.*' ], [ 'engine_delay', 'AGX', '.*' ], [ 'vram_128', 'AGX', '.*' ], [ 'vram_256', 'AGX', '.*' ], [ 'refresh_20', 'AGX', '.*' ], [ 'refresh_25', 'AGX', '.*' ], [ 'screen_refresh', 'AGX', '.*' ], [ 'vlb_a', 'AGX', '.*' ], [ 'vlb_b', 'AGX', '.*' ], [ 'slow_dram', 'W32', '.*' ], [ 'pci_burst_off', 'W32', '.*' ], [ 'w32_interleave_off', 'W32', '.*' ], [ 'no_accel', 'W32', '.*' ], [ 'nolinear', '8514', '.*' ], [ 'sw_cursor', '8514', '.*' ], [ 'no_block_write', '8514', '.*' ], [ 'block_write', '8514', '.*' ], [ 'fifo_conservative', '8514', '.*' ], [ 'no_font_cache', '8514', '.*' ], [ 'no_pixmap_cache', '8514', '.*' ], [ 'composite', '8514', '.*' ], [ 'power_saver', '8514', '.*' ], [ 'power_saver', 'FBDev', '.*' ], ); %xkb_options = ( 'ru(winkeys)' => [ 'XkbVariant "winkeys"', 'XkbOptions "grp:caps_toggle"' ], 'jp' => [ 'XkbModel "jp106"' ], ); $XF86firstchunk_text = q( # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail ); $XF86firstchunk_text2 = q( EndSection # ********************************************************************** # Input devices # ********************************************************************** ); $keyboardsection_start = ' # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line #Protocol "Xqueue" AutoRepeat 250 30 # Let the server do the NumLock processing. This should only be # required when using pre-R6 clients #ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) #Xleds "1 2 3" #To set the LeftAlt to Meta, RightAlt key to ModeShift, #RightCtl key to Compose, and ScrollLock key to ModeLock: LeftAlt Meta RightAlt Meta ScrollLock Compose RightCtl Control # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable '; $keyboardsection_start_v4 = ' # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" '; if (arch() =~ /^sparc/) { $keyboardsection_part3 = ' # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example: # XkbModel "type6" # If you have a SUN keyboard, you may use: # XkbModel "sun" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you\'d like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for XFree86 on SUN: # XkbRules "sun" # XkbModel "type5_unix" # XkbLayout "us" # XkbCompat "compat/complete" # XkbTypes "types/complete" # XkbKeycodes "sun(type5)" # XkbGeometry "sun(type5)" # XkbSymbols "sun/us(sun5)" XkbRules "sun" XkbModel "sun" XkbLayout "us" XkbCompat "compat/complete" XkbTypes "types/complete" XkbKeycodes "sun(type5)" XkbGeometry "sun(type5)" XkbSymbols "sun/us(sun5)" '; $keyboardsection_part3_v4 = ' Option "XkbRules" "sun" Option "XkbModel" "sun" Option "XkbLayout" "us" Option "XkbCompat" "compat/complete" Option "XkbTypes" "types/complete" Option "XkbKeycodes" "sun(type5)" Option "XkbGeometry" "sun(type5)" Option "XkbSymbols" "sun/us(sun5)" '; } else { $keyboardsection_part3 = ' # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you\'d like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for XFree86 # XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeycodes "xfree86" XkbTypes "default" XkbCompat "default" XkbSymbols "us(pc105)" XkbGeometry "pc" XkbRules "xfree86" XkbModel "pc105" '; $keyboardsection_part3_v4 = ' Option "XkbRules" "xfree86" Option "XkbModel" "pc105" '; } $keyboardsection_end = ' EndSection '; $pointersection_text = ' # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" '; $pointersection_text_v4 = ' # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" '; $monitorsection_text1 = ' # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" '; $monitorsection_text2 = ' # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S # USER MANUAL FOR THE CORRECT NUMBERS. '; $monitorsection_text3 = ' # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S # USER MANUAL FOR THE CORRECT NUMBERS. '; $monitorsection_text4 = ' # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode '; $modelines_text_Trident_TG_96xx = ' # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there\'s no immediate need to # delete mode timings (unless particular mode timings don\'t work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # These are special modelines for Trident Providia 9685. It is for VA Linux # systems only. # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync '; $modelines_text = ' # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there\'s no immediate need to # delete mode timings (unless particular mode timings don\'t work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace # 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 1152x864 @ 89 Hz interlaced, 44 kHz hsync ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync # 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync # 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace # 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync # 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 # 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 # 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 # 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync # 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 # 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync # 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 # 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 # 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync # 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 # 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync # 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync # 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync # 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync # Low-res Doublescan modes # If your chipset does not support doublescan, you get a \'squashed\' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan '; $devicesection_text = ' # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Chipset "generic" EndSection '; $devicesection_text_v4 = ' # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection '; $screensection_text1 = ' # ********************************************************************** # Screen sections # ********************************************************************** ';